| /* |
| * VIA AGPGART routines. |
| */ |
| |
| #include <linux/types.h> |
| #include <linux/module.h> |
| #include <linux/pci.h> |
| #include <linux/init.h> |
| #include <linux/agp_backend.h> |
| #include "agp.h" |
| |
| static const struct pci_device_id agp_via_pci_table[]; |
| |
| #define VIA_GARTCTRL 0x80 |
| #define VIA_APSIZE 0x84 |
| #define VIA_ATTBASE 0x88 |
| |
| #define VIA_AGP3_GARTCTRL 0x90 |
| #define VIA_AGP3_APSIZE 0x94 |
| #define VIA_AGP3_ATTBASE 0x98 |
| #define VIA_AGPSEL 0xfd |
| |
| static int via_fetch_size(void) |
| { |
| int i; |
| u8 temp; |
| struct aper_size_info_8 *values; |
| |
| values = A_SIZE_8(agp_bridge->driver->aperture_sizes); |
| pci_read_config_byte(agp_bridge->dev, VIA_APSIZE, &temp); |
| for (i = 0; i < agp_bridge->driver->num_aperture_sizes; i++) { |
| if (temp == values[i].size_value) { |
| agp_bridge->previous_size = |
| agp_bridge->current_size = (void *) (values + i); |
| agp_bridge->aperture_size_idx = i; |
| return values[i].size; |
| } |
| } |
| printk(KERN_ERR PFX "Unknown aperture size from AGP bridge (0x%x)\n", temp); |
| return 0; |
| } |
| |
| |
| static int via_configure(void) |
| { |
| u32 temp; |
| struct aper_size_info_8 *current_size; |
| |
| current_size = A_SIZE_8(agp_bridge->current_size); |
| /* aperture size */ |
| pci_write_config_byte(agp_bridge->dev, VIA_APSIZE, |
| current_size->size_value); |
| /* address to map too */ |
| pci_read_config_dword(agp_bridge->dev, AGP_APBASE, &temp); |
| agp_bridge->gart_bus_addr = (temp & PCI_BASE_ADDRESS_MEM_MASK); |
| |
| /* GART control register */ |
| pci_write_config_dword(agp_bridge->dev, VIA_GARTCTRL, 0x0000000f); |
| |
| /* attbase - aperture GATT base */ |
| pci_write_config_dword(agp_bridge->dev, VIA_ATTBASE, |
| (agp_bridge->gatt_bus_addr & 0xfffff000) | 3); |
| return 0; |
| } |
| |
| |
| static void via_cleanup(void) |
| { |
| struct aper_size_info_8 *previous_size; |
| |
| previous_size = A_SIZE_8(agp_bridge->previous_size); |
| pci_write_config_byte(agp_bridge->dev, VIA_APSIZE, |
| previous_size->size_value); |
| /* Do not disable by writing 0 to VIA_ATTBASE, it screws things up |
| * during reinitialization. |
| */ |
| } |
| |
| |
| static void via_tlbflush(struct agp_memory *mem) |
| { |
| u32 temp; |
| |
| pci_read_config_dword(agp_bridge->dev, VIA_GARTCTRL, &temp); |
| temp |= (1<<7); |
| pci_write_config_dword(agp_bridge->dev, VIA_GARTCTRL, temp); |
| temp &= ~(1<<7); |
| pci_write_config_dword(agp_bridge->dev, VIA_GARTCTRL, temp); |
| } |
| |
| |
| static struct aper_size_info_8 via_generic_sizes[9] = |
| { |
| {256, 65536, 6, 0}, |
| {128, 32768, 5, 128}, |
| {64, 16384, 4, 192}, |
| {32, 8192, 3, 224}, |
| {16, 4096, 2, 240}, |
| {8, 2048, 1, 248}, |
| {4, 1024, 0, 252}, |
| {2, 512, 0, 254}, |
| {1, 256, 0, 255} |
| }; |
| |
| |
| static int via_fetch_size_agp3(void) |
| { |
| int i; |
| u16 temp; |
| struct aper_size_info_16 *values; |
| |
| values = A_SIZE_16(agp_bridge->driver->aperture_sizes); |
| pci_read_config_word(agp_bridge->dev, VIA_AGP3_APSIZE, &temp); |
| temp &= 0xfff; |
| |
| for (i = 0; i < agp_bridge->driver->num_aperture_sizes; i++) { |
| if (temp == values[i].size_value) { |
| agp_bridge->previous_size = |
| agp_bridge->current_size = (void *) (values + i); |
| agp_bridge->aperture_size_idx = i; |
| return values[i].size; |
| } |
| } |
| return 0; |
| } |
| |
| |
| static int via_configure_agp3(void) |
| { |
| u32 temp; |
| struct aper_size_info_16 *current_size; |
| |
| current_size = A_SIZE_16(agp_bridge->current_size); |
| |
| /* address to map too */ |
| pci_read_config_dword(agp_bridge->dev, AGP_APBASE, &temp); |
| agp_bridge->gart_bus_addr = (temp & PCI_BASE_ADDRESS_MEM_MASK); |
| |
| /* attbase - aperture GATT base */ |
| pci_write_config_dword(agp_bridge->dev, VIA_AGP3_ATTBASE, |
| agp_bridge->gatt_bus_addr & 0xfffff000); |
| |
| /* 1. Enable GTLB in RX90<7>, all AGP aperture access needs to fetch |
| * translation table first. |
| * 2. Enable AGP aperture in RX91<0>. This bit controls the enabling of the |
| * graphics AGP aperture for the AGP3.0 port. |
| */ |
| pci_read_config_dword(agp_bridge->dev, VIA_AGP3_GARTCTRL, &temp); |
| pci_write_config_dword(agp_bridge->dev, VIA_AGP3_GARTCTRL, temp | (3<<7)); |
| return 0; |
| } |
| |
| |
| static void via_cleanup_agp3(void) |
| { |
| struct aper_size_info_16 *previous_size; |
| |
| previous_size = A_SIZE_16(agp_bridge->previous_size); |
| pci_write_config_byte(agp_bridge->dev, VIA_APSIZE, previous_size->size_value); |
| } |
| |
| |
| static void via_tlbflush_agp3(struct agp_memory *mem) |
| { |
| u32 temp; |
| |
| pci_read_config_dword(agp_bridge->dev, VIA_AGP3_GARTCTRL, &temp); |
| pci_write_config_dword(agp_bridge->dev, VIA_AGP3_GARTCTRL, temp & ~(1<<7)); |
| pci_write_config_dword(agp_bridge->dev, VIA_AGP3_GARTCTRL, temp); |
| } |
| |
| |
| static struct agp_bridge_driver via_agp3_driver = { |
| .owner = THIS_MODULE, |
| .aperture_sizes = agp3_generic_sizes, |
| .size_type = U8_APER_SIZE, |
| .num_aperture_sizes = 10, |
| .configure = via_configure_agp3, |
| .fetch_size = via_fetch_size_agp3, |
| .cleanup = via_cleanup_agp3, |
| .tlb_flush = via_tlbflush_agp3, |
| .mask_memory = agp_generic_mask_memory, |
| .masks = NULL, |
| .agp_enable = agp_generic_enable, |
| .cache_flush = global_cache_flush, |
| .create_gatt_table = agp_generic_create_gatt_table, |
| .free_gatt_table = agp_generic_free_gatt_table, |
| .insert_memory = agp_generic_insert_memory, |
| .remove_memory = agp_generic_remove_memory, |
| .alloc_by_type = agp_generic_alloc_by_type, |
| .free_by_type = agp_generic_free_by_type, |
| .agp_alloc_page = agp_generic_alloc_page, |
| .agp_destroy_page = agp_generic_destroy_page, |
| .agp_type_to_mask_type = agp_generic_type_to_mask_type, |
| }; |
| |
| static struct agp_bridge_driver via_driver = { |
| .owner = THIS_MODULE, |
| .aperture_sizes = via_generic_sizes, |
| .size_type = U8_APER_SIZE, |
| .num_aperture_sizes = 9, |
| .configure = via_configure, |
| .fetch_size = via_fetch_size, |
| .cleanup = via_cleanup, |
| .tlb_flush = via_tlbflush, |
| .mask_memory = agp_generic_mask_memory, |
| .masks = NULL, |
| .agp_enable = agp_generic_enable, |
| .cache_flush = global_cache_flush, |
| .create_gatt_table = agp_generic_create_gatt_table, |
| .free_gatt_table = agp_generic_free_gatt_table, |
| .insert_memory = agp_generic_insert_memory, |
| .remove_memory = agp_generic_remove_memory, |
| .alloc_by_type = agp_generic_alloc_by_type, |
| .free_by_type = agp_generic_free_by_type, |
| .agp_alloc_page = agp_generic_alloc_page, |
| .agp_destroy_page = agp_generic_destroy_page, |
| .agp_type_to_mask_type = agp_generic_type_to_mask_type, |
| }; |
| |
| static struct agp_device_ids via_agp_device_ids[] __devinitdata = |
| { |
| { |
| .device_id = PCI_DEVICE_ID_VIA_82C597_0, |
| .chipset_name = "Apollo VP3", |
| }, |
| |
| { |
| .device_id = PCI_DEVICE_ID_VIA_82C598_0, |
| .chipset_name = "Apollo MVP3", |
| }, |
| |
| { |
| .device_id = PCI_DEVICE_ID_VIA_8501_0, |
| .chipset_name = "Apollo MVP4", |
| }, |
| |
| /* VT8601 */ |
| { |
| .device_id = PCI_DEVICE_ID_VIA_8601_0, |
| .chipset_name = "Apollo ProMedia/PLE133Ta", |
| }, |
| |
| /* VT82C693A / VT28C694T */ |
| { |
| .device_id = PCI_DEVICE_ID_VIA_82C691_0, |
| .chipset_name = "Apollo Pro 133", |
| }, |
| |
| { |
| .device_id = PCI_DEVICE_ID_VIA_8371_0, |
| .chipset_name = "KX133", |
| }, |
| |
| /* VT8633 */ |
| { |
| .device_id = PCI_DEVICE_ID_VIA_8633_0, |
| .chipset_name = "Pro 266", |
| }, |
| |
| { |
| .device_id = PCI_DEVICE_ID_VIA_XN266, |
| .chipset_name = "Apollo Pro266", |
| }, |
| |
| /* VT8361 */ |
| { |
| .device_id = PCI_DEVICE_ID_VIA_8361, |
| .chipset_name = "KLE133", |
| }, |
| |
| /* VT8365 / VT8362 */ |
| { |
| .device_id = PCI_DEVICE_ID_VIA_8363_0, |
| .chipset_name = "Twister-K/KT133x/KM133", |
| }, |
| |
| /* VT8753A */ |
| { |
| .device_id = PCI_DEVICE_ID_VIA_8753_0, |
| .chipset_name = "P4X266", |
| }, |
| |
| /* VT8366 */ |
| { |
| .device_id = PCI_DEVICE_ID_VIA_8367_0, |
| .chipset_name = "KT266/KY266x/KT333", |
| }, |
| |
| /* VT8633 (for CuMine/ Celeron) */ |
| { |
| .device_id = PCI_DEVICE_ID_VIA_8653_0, |
| .chipset_name = "Pro266T", |
| }, |
| |
| /* KM266 / PM266 */ |
| { |
| .device_id = PCI_DEVICE_ID_VIA_XM266, |
| .chipset_name = "PM266/KM266", |
| }, |
| |
| /* CLE266 */ |
| { |
| .device_id = PCI_DEVICE_ID_VIA_862X_0, |
| .chipset_name = "CLE266", |
| }, |
| |
| { |
| .device_id = PCI_DEVICE_ID_VIA_8377_0, |
| .chipset_name = "KT400/KT400A/KT600", |
| }, |
| |
| /* VT8604 / VT8605 / VT8603 |
| * (Apollo Pro133A chipset with S3 Savage4) */ |
| { |
| .device_id = PCI_DEVICE_ID_VIA_8605_0, |
| .chipset_name = "ProSavage PM133/PL133/PN133" |
| }, |
| |
| /* P4M266x/P4N266 */ |
| { |
| .device_id = PCI_DEVICE_ID_VIA_8703_51_0, |
| .chipset_name = "P4M266x/P4N266", |
| }, |
| |
| /* VT8754 */ |
| { |
| .device_id = PCI_DEVICE_ID_VIA_8754C_0, |
| .chipset_name = "PT800", |
| }, |
| |
| /* P4X600 */ |
| { |
| .device_id = PCI_DEVICE_ID_VIA_8763_0, |
| .chipset_name = "P4X600" |
| }, |
| |
| /* KM400 */ |
| { |
| .device_id = PCI_DEVICE_ID_VIA_8378_0, |
| .chipset_name = "KM400/KM400A", |
| }, |
| |
| /* PT880 */ |
| { |
| .device_id = PCI_DEVICE_ID_VIA_PT880, |
| .chipset_name = "PT880", |
| }, |
| |
| /* PT880 Ultra */ |
| { |
| .device_id = PCI_DEVICE_ID_VIA_PT880ULTRA, |
| .chipset_name = "PT880 Ultra", |
| }, |
| |
| /* PT890 */ |
| { |
| .device_id = PCI_DEVICE_ID_VIA_8783_0, |
| .chipset_name = "PT890", |
| }, |
| |
| /* PM800/PN800/PM880/PN880 */ |
| { |
| .device_id = PCI_DEVICE_ID_VIA_PX8X0_0, |
| .chipset_name = "PM800/PN800/PM880/PN880", |
| }, |
| /* KT880 */ |
| { |
| .device_id = PCI_DEVICE_ID_VIA_3269_0, |
| .chipset_name = "KT880", |
| }, |
| /* KTxxx/Px8xx */ |
| { |
| .device_id = PCI_DEVICE_ID_VIA_83_87XX_1, |
| .chipset_name = "VT83xx/VT87xx/KTxxx/Px8xx", |
| }, |
| /* P4M800 */ |
| { |
| .device_id = PCI_DEVICE_ID_VIA_3296_0, |
| .chipset_name = "P4M800", |
| }, |
| /* P4M800CE */ |
| { |
| .device_id = PCI_DEVICE_ID_VIA_P4M800CE, |
| .chipset_name = "VT3314", |
| }, |
| /* CX700 */ |
| { |
| .device_id = PCI_DEVICE_ID_VIA_CX700, |
| .chipset_name = "CX700", |
| }, |
| /* VT3336 */ |
| { |
| .device_id = PCI_DEVICE_ID_VIA_VT3336, |
| .chipset_name = "VT3336", |
| }, |
| /* P4M890 */ |
| { |
| .device_id = PCI_DEVICE_ID_VIA_P4M890, |
| .chipset_name = "P4M890", |
| }, |
| { }, /* dummy final entry, always present */ |
| }; |
| |
| |
| /* |
| * VIA's AGP3 chipsets do magick to put the AGP bridge compliant |
| * with the same standards version as the graphics card. |
| */ |
| static void check_via_agp3 (struct agp_bridge_data *bridge) |
| { |
| u8 reg; |
| |
| pci_read_config_byte(bridge->dev, VIA_AGPSEL, ®); |
| /* Check AGP 2.0 compatibility mode. */ |
| if ((reg & (1<<1))==0) |
| bridge->driver = &via_agp3_driver; |
| } |
| |
| |
| static int __devinit agp_via_probe(struct pci_dev *pdev, |
| const struct pci_device_id *ent) |
| { |
| struct agp_device_ids *devs = via_agp_device_ids; |
| struct agp_bridge_data *bridge; |
| int j = 0; |
| u8 cap_ptr; |
| |
| cap_ptr = pci_find_capability(pdev, PCI_CAP_ID_AGP); |
| if (!cap_ptr) |
| return -ENODEV; |
| |
| j = ent - agp_via_pci_table; |
| printk (KERN_INFO PFX "Detected VIA %s chipset\n", devs[j].chipset_name); |
| |
| bridge = agp_alloc_bridge(); |
| if (!bridge) |
| return -ENOMEM; |
| |
| bridge->dev = pdev; |
| bridge->capndx = cap_ptr; |
| bridge->driver = &via_driver; |
| |
| /* |
| * Garg, there are KT400s with KT266 IDs. |
| */ |
| if (pdev->device == PCI_DEVICE_ID_VIA_8367_0) { |
| /* Is there a KT400 subsystem ? */ |
| if (pdev->subsystem_device == PCI_DEVICE_ID_VIA_8377_0) { |
| printk(KERN_INFO PFX "Found KT400 in disguise as a KT266.\n"); |
| check_via_agp3(bridge); |
| } |
| } |
| |
| /* If this is an AGP3 bridge, check which mode its in and adjust. */ |
| get_agp_version(bridge); |
| if (bridge->major_version >= 3) |
| check_via_agp3(bridge); |
| |
| /* Fill in the mode register */ |
| pci_read_config_dword(pdev, |
| bridge->capndx+PCI_AGP_STATUS, &bridge->mode); |
| |
| pci_set_drvdata(pdev, bridge); |
| return agp_add_bridge(bridge); |
| } |
| |
| static void __devexit agp_via_remove(struct pci_dev *pdev) |
| { |
| struct agp_bridge_data *bridge = pci_get_drvdata(pdev); |
| |
| agp_remove_bridge(bridge); |
| agp_put_bridge(bridge); |
| } |
| |
| #ifdef CONFIG_PM |
| |
| static int agp_via_suspend(struct pci_dev *pdev, pm_message_t state) |
| { |
| pci_save_state (pdev); |
| pci_set_power_state (pdev, PCI_D3hot); |
| |
| return 0; |
| } |
| |
| static int agp_via_resume(struct pci_dev *pdev) |
| { |
| struct agp_bridge_data *bridge = pci_get_drvdata(pdev); |
| |
| pci_set_power_state (pdev, PCI_D0); |
| pci_restore_state(pdev); |
| |
| if (bridge->driver == &via_agp3_driver) |
| return via_configure_agp3(); |
| else if (bridge->driver == &via_driver) |
| return via_configure(); |
| |
| return 0; |
| } |
| |
| #endif /* CONFIG_PM */ |
| |
| /* must be the same order as name table above */ |
| static const struct pci_device_id agp_via_pci_table[] = { |
| #define ID(x) \ |
| { \ |
| .class = (PCI_CLASS_BRIDGE_HOST << 8), \ |
| .class_mask = ~0, \ |
| .vendor = PCI_VENDOR_ID_VIA, \ |
| .device = x, \ |
| .subvendor = PCI_ANY_ID, \ |
| .subdevice = PCI_ANY_ID, \ |
| } |
| ID(PCI_DEVICE_ID_VIA_82C597_0), |
| ID(PCI_DEVICE_ID_VIA_82C598_0), |
| ID(PCI_DEVICE_ID_VIA_8501_0), |
| ID(PCI_DEVICE_ID_VIA_8601_0), |
| ID(PCI_DEVICE_ID_VIA_82C691_0), |
| ID(PCI_DEVICE_ID_VIA_8371_0), |
| ID(PCI_DEVICE_ID_VIA_8633_0), |
| ID(PCI_DEVICE_ID_VIA_XN266), |
| ID(PCI_DEVICE_ID_VIA_8361), |
| ID(PCI_DEVICE_ID_VIA_8363_0), |
| ID(PCI_DEVICE_ID_VIA_8753_0), |
| ID(PCI_DEVICE_ID_VIA_8367_0), |
| ID(PCI_DEVICE_ID_VIA_8653_0), |
| ID(PCI_DEVICE_ID_VIA_XM266), |
| ID(PCI_DEVICE_ID_VIA_862X_0), |
| ID(PCI_DEVICE_ID_VIA_8377_0), |
| ID(PCI_DEVICE_ID_VIA_8605_0), |
| ID(PCI_DEVICE_ID_VIA_8703_51_0), |
| ID(PCI_DEVICE_ID_VIA_8754C_0), |
| ID(PCI_DEVICE_ID_VIA_8763_0), |
| ID(PCI_DEVICE_ID_VIA_8378_0), |
| ID(PCI_DEVICE_ID_VIA_PT880), |
| ID(PCI_DEVICE_ID_VIA_PT880ULTRA), |
| ID(PCI_DEVICE_ID_VIA_8783_0), |
| ID(PCI_DEVICE_ID_VIA_PX8X0_0), |
| ID(PCI_DEVICE_ID_VIA_3269_0), |
| ID(PCI_DEVICE_ID_VIA_83_87XX_1), |
| ID(PCI_DEVICE_ID_VIA_3296_0), |
| ID(PCI_DEVICE_ID_VIA_P4M800CE), |
| ID(PCI_DEVICE_ID_VIA_CX700), |
| ID(PCI_DEVICE_ID_VIA_VT3336), |
| ID(PCI_DEVICE_ID_VIA_P4M890), |
| { } |
| }; |
| |
| MODULE_DEVICE_TABLE(pci, agp_via_pci_table); |
| |
| |
| static struct pci_driver agp_via_pci_driver = { |
| .name = "agpgart-via", |
| .id_table = agp_via_pci_table, |
| .probe = agp_via_probe, |
| .remove = agp_via_remove, |
| #ifdef CONFIG_PM |
| .suspend = agp_via_suspend, |
| .resume = agp_via_resume, |
| #endif |
| }; |
| |
| |
| static int __init agp_via_init(void) |
| { |
| if (agp_off) |
| return -EINVAL; |
| return pci_register_driver(&agp_via_pci_driver); |
| } |
| |
| static void __exit agp_via_cleanup(void) |
| { |
| pci_unregister_driver(&agp_via_pci_driver); |
| } |
| |
| module_init(agp_via_init); |
| module_exit(agp_via_cleanup); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("Dave Jones <davej@codemonkey.org.uk>"); |