| Freescale i.MX Platforms Device Tree Bindings |
| ----------------------------------------------- |
| |
| i.MX23 Evaluation Kit |
| Required root node properties: |
| - compatible = "fsl,imx23-evk", "fsl,imx23"; |
| |
| i.MX25 Product Development Kit |
| Required root node properties: |
| - compatible = "fsl,imx25-pdk", "fsl,imx25"; |
| |
| i.MX27 Product Development Kit |
| Required root node properties: |
| - compatible = "fsl,imx27-pdk", "fsl,imx27"; |
| |
| i.MX28 Evaluation Kit |
| Required root node properties: |
| - compatible = "fsl,imx28-evk", "fsl,imx28"; |
| |
| i.MX51 Babbage Board |
| Required root node properties: |
| - compatible = "fsl,imx51-babbage", "fsl,imx51"; |
| |
| i.MX53 Automotive Reference Design Board |
| Required root node properties: |
| - compatible = "fsl,imx53-ard", "fsl,imx53"; |
| |
| i.MX53 Evaluation Kit |
| Required root node properties: |
| - compatible = "fsl,imx53-evk", "fsl,imx53"; |
| |
| i.MX53 Quick Start Board |
| Required root node properties: |
| - compatible = "fsl,imx53-qsb", "fsl,imx53"; |
| |
| i.MX53 Smart Mobile Reference Design Board |
| Required root node properties: |
| - compatible = "fsl,imx53-smd", "fsl,imx53"; |
| |
| i.MX6 Quad Armadillo2 Board |
| Required root node properties: |
| - compatible = "fsl,imx6q-arm2", "fsl,imx6q"; |
| |
| i.MX6 Quad SABRE Lite Board |
| Required root node properties: |
| - compatible = "fsl,imx6q-sabrelite", "fsl,imx6q"; |
| |
| i.MX6 Quad SABRE Smart Device Board |
| Required root node properties: |
| - compatible = "fsl,imx6q-sabresd", "fsl,imx6q"; |
| |
| i.MX6 Quad SABRE Automotive Board |
| Required root node properties: |
| - compatible = "fsl,imx6q-sabreauto", "fsl,imx6q"; |
| |
| Generic i.MX boards |
| ------------------- |
| |
| No iomux setup is done for these boards, so this must have been configured |
| by the bootloader for boards to work with the generic bindings. |
| |
| i.MX27 generic board |
| Required root node properties: |
| - compatible = "fsl,imx27"; |
| |
| i.MX51 generic board |
| Required root node properties: |
| - compatible = "fsl,imx51"; |
| |
| i.MX53 generic board |
| Required root node properties: |
| - compatible = "fsl,imx53"; |
| |
| i.MX6q generic board |
| Required root node properties: |
| - compatible = "fsl,imx6q"; |
| |
| Freescale Vybrid Platform Device Tree Bindings |
| ---------------------------------------------- |
| |
| For the Vybrid SoC familiy all variants with DDR controller are supported, |
| which is the VF5xx and VF6xx series. Out of historical reasons, in most |
| places the kernel uses vf610 to refer to the whole familiy. |
| The compatible string "fsl,vf610m4" is used for the secondary Cortex-M4 |
| core support. |
| |
| Required root node compatible property (one of them): |
| - compatible = "fsl,vf500"; |
| - compatible = "fsl,vf510"; |
| - compatible = "fsl,vf600"; |
| - compatible = "fsl,vf610"; |
| - compatible = "fsl,vf610m4"; |
| |
| Freescale LS1021A Platform Device Tree Bindings |
| ------------------------------------------------ |
| |
| Required root node compatible properties: |
| - compatible = "fsl,ls1021a"; |
| |
| Freescale SoC-specific Device Tree Bindings |
| ------------------------------------------- |
| |
| Freescale SCFG |
| SCFG is the supplemental configuration unit, that provides SoC specific |
| configuration and status registers for the chip. Such as getting PEX port |
| status. |
| Required properties: |
| - compatible: Should contain a chip-specific compatible string, |
| Chip-specific strings are of the form "fsl,<chip>-scfg", |
| The following <chip>s are known to be supported: |
| ls1012a, ls1021a, ls1043a, ls1046a, ls2080a. |
| |
| - reg: should contain base address and length of SCFG memory-mapped registers |
| |
| Example: |
| scfg: scfg@1570000 { |
| compatible = "fsl,ls1021a-scfg"; |
| reg = <0x0 0x1570000 0x0 0x10000>; |
| }; |
| |
| Freescale DCFG |
| DCFG is the device configuration unit, that provides general purpose |
| configuration and status for the device. Such as setting the secondary |
| core start address and release the secondary core from holdoff and startup. |
| Required properties: |
| - compatible: Should contain a chip-specific compatible string, |
| Chip-specific strings are of the form "fsl,<chip>-dcfg", |
| The following <chip>s are known to be supported: |
| ls1012a, ls1021a, ls1043a, ls1046a, ls2080a. |
| |
| - reg : should contain base address and length of DCFG memory-mapped registers |
| |
| Example: |
| dcfg: dcfg@1ee0000 { |
| compatible = "fsl,ls1021a-dcfg"; |
| reg = <0x0 0x1ee0000 0x0 0x10000>; |
| }; |
| |
| Freescale ARMv8 based Layerscape SoC family Device Tree Bindings |
| ---------------------------------------------------------------- |
| |
| LS1012A SoC |
| Required root node properties: |
| - compatible = "fsl,ls1012a"; |
| |
| LS1012A ARMv8 based RDB Board |
| Required root node properties: |
| - compatible = "fsl,ls1012a-rdb", "fsl,ls1012a"; |
| |
| LS1012A ARMv8 based FRDM Board |
| Required root node properties: |
| - compatible = "fsl,ls1012a-frdm", "fsl,ls1012a"; |
| |
| LS1012A ARMv8 based QDS Board |
| Required root node properties: |
| - compatible = "fsl,ls1012a-qds", "fsl,ls1012a"; |
| |
| LS1043A SoC |
| Required root node properties: |
| - compatible = "fsl,ls1043a"; |
| |
| LS1043A ARMv8 based RDB Board |
| Required root node properties: |
| - compatible = "fsl,ls1043a-rdb", "fsl,ls1043a"; |
| |
| LS1043A ARMv8 based QDS Board |
| Required root node properties: |
| - compatible = "fsl,ls1043a-qds", "fsl,ls1043a"; |
| |
| LS1046A SoC |
| Required root node properties: |
| - compatible = "fsl,ls1046a"; |
| |
| LS1046A ARMv8 based QDS Board |
| Required root node properties: |
| - compatible = "fsl,ls1046a-qds", "fsl,ls1046a"; |
| |
| LS1046A ARMv8 based RDB Board |
| Required root node properties: |
| - compatible = "fsl,ls1046a-rdb", "fsl,ls1046a"; |
| |
| LS2080A SoC |
| Required root node properties: |
| - compatible = "fsl,ls2080a"; |
| |
| LS2080A ARMv8 based Simulator model |
| Required root node properties: |
| - compatible = "fsl,ls2080a-simu", "fsl,ls2080a"; |
| |
| LS2080A ARMv8 based QDS Board |
| Required root node properties: |
| - compatible = "fsl,ls2080a-qds", "fsl,ls2080a"; |
| |
| LS2080A ARMv8 based RDB Board |
| Required root node properties: |
| - compatible = "fsl,ls2080a-rdb", "fsl,ls2080a"; |
| |