| /* |
| * arch/xtensa/kernel/head.S |
| * |
| * Xtensa Processor startup code. |
| * |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file "COPYING" in the main directory of this archive |
| * for more details. |
| * |
| * Copyright (C) 2001 - 2005 Tensilica Inc. |
| * |
| * Chris Zankel <chris@zankel.net> |
| * Marc Gauthier <marc@tensilica.com, marc@alumni.uwaterloo.ca> |
| * Joe Taylor <joe@tensilica.com, joetylr@yahoo.com> |
| * Kevin Chea |
| */ |
| |
| #include <asm/processor.h> |
| #include <asm/page.h> |
| #include <asm/cacheasm.h> |
| |
| #include <linux/init.h> |
| #include <linux/linkage.h> |
| |
| /* |
| * This module contains the entry code for kernel images. It performs the |
| * minimal setup needed to call the generic C routines. |
| * |
| * Prerequisites: |
| * |
| * - The kernel image has been loaded to the actual address where it was |
| * compiled to. |
| * - a2 contains either 0 or a pointer to a list of boot parameters. |
| * (see setup.c for more details) |
| * |
| */ |
| |
| /* |
| * _start |
| * |
| * The bootloader passes a pointer to a list of boot parameters in a2. |
| */ |
| |
| /* The first bytes of the kernel image must be an instruction, so we |
| * manually allocate and define the literal constant we need for a jx |
| * instruction. |
| */ |
| |
| __HEAD |
| .globl _start |
| _start: _j 2f |
| .align 4 |
| 1: .word _startup |
| 2: l32r a0, 1b |
| jx a0 |
| |
| .section .init.text, "ax" |
| .align 4 |
| _startup: |
| |
| /* Disable interrupts and exceptions. */ |
| |
| movi a0, LOCKLEVEL |
| wsr a0, PS |
| |
| /* Preserve the pointer to the boot parameter list in EXCSAVE_1 */ |
| |
| wsr a2, EXCSAVE_1 |
| |
| /* Start with a fresh windowbase and windowstart. */ |
| |
| movi a1, 1 |
| movi a0, 0 |
| wsr a1, WINDOWSTART |
| wsr a0, WINDOWBASE |
| rsync |
| |
| /* Set a0 to 0 for the remaining initialization. */ |
| |
| movi a0, 0 |
| |
| /* Clear debugging registers. */ |
| |
| #if XCHAL_HAVE_DEBUG |
| wsr a0, IBREAKENABLE |
| wsr a0, ICOUNT |
| movi a1, 15 |
| wsr a0, ICOUNTLEVEL |
| |
| .set _index, 0 |
| .rept XCHAL_NUM_DBREAK - 1 |
| wsr a0, DBREAKC + _index |
| .set _index, _index + 1 |
| .endr |
| #endif |
| |
| /* Clear CCOUNT (not really necessary, but nice) */ |
| |
| wsr a0, CCOUNT # not really necessary, but nice |
| |
| /* Disable zero-loops. */ |
| |
| #if XCHAL_HAVE_LOOPS |
| wsr a0, LCOUNT |
| #endif |
| |
| /* Disable all timers. */ |
| |
| .set _index, 0 |
| .rept XCHAL_NUM_TIMERS - 1 |
| wsr a0, CCOMPARE + _index |
| .set _index, _index + 1 |
| .endr |
| |
| /* Interrupt initialization. */ |
| |
| movi a2, XCHAL_INTTYPE_MASK_SOFTWARE | XCHAL_INTTYPE_MASK_EXTERN_EDGE |
| wsr a0, INTENABLE |
| wsr a2, INTCLEAR |
| |
| /* Disable coprocessors. */ |
| |
| #if XCHAL_CP_NUM > 0 |
| wsr a0, CPENABLE |
| #endif |
| |
| /* Set PS.INTLEVEL=1, PS.WOE=0, kernel stack, PS.EXCM=0 |
| * |
| * Note: PS.EXCM must be cleared before using any loop |
| * instructions; otherwise, they are silently disabled, and |
| * at most one iteration of the loop is executed. |
| */ |
| |
| movi a1, 1 |
| wsr a1, PS |
| rsync |
| |
| /* Initialize the caches. |
| * a2, a3 are just working registers (clobbered). |
| */ |
| |
| #if XCHAL_DCACHE_LINE_LOCKABLE |
| ___unlock_dcache_all a2 a3 |
| #endif |
| |
| #if XCHAL_ICACHE_LINE_LOCKABLE |
| ___unlock_icache_all a2 a3 |
| #endif |
| |
| ___invalidate_dcache_all a2 a3 |
| ___invalidate_icache_all a2 a3 |
| |
| isync |
| |
| /* Unpack data sections |
| * |
| * The linker script used to build the Linux kernel image |
| * creates a table located at __boot_reloc_table_start |
| * that contans the information what data needs to be unpacked. |
| * |
| * Uses a2-a7. |
| */ |
| |
| movi a2, __boot_reloc_table_start |
| movi a3, __boot_reloc_table_end |
| |
| 1: beq a2, a3, 3f # no more entries? |
| l32i a4, a2, 0 # start destination (in RAM) |
| l32i a5, a2, 4 # end desination (in RAM) |
| l32i a6, a2, 8 # start source (in ROM) |
| addi a2, a2, 12 # next entry |
| beq a4, a5, 1b # skip, empty entry |
| beq a4, a6, 1b # skip, source and dest. are the same |
| |
| 2: l32i a7, a6, 0 # load word |
| addi a6, a6, 4 |
| s32i a7, a4, 0 # store word |
| addi a4, a4, 4 |
| bltu a4, a5, 2b |
| j 1b |
| |
| 3: |
| /* All code and initialized data segments have been copied. |
| * Now clear the BSS segment. |
| */ |
| |
| movi a2, __bss_start # start of BSS |
| movi a3, __bss_stop # end of BSS |
| |
| __loopt a2, a3, a4, 2 |
| s32i a0, a2, 0 |
| __endla a2, a4, 4 |
| |
| #if XCHAL_DCACHE_IS_WRITEBACK |
| |
| /* After unpacking, flush the writeback cache to memory so the |
| * instructions/data are available. |
| */ |
| |
| ___flush_dcache_all a2 a3 |
| #endif |
| |
| /* Setup stack and enable window exceptions (keep irqs disabled) */ |
| |
| movi a1, init_thread_union |
| addi a1, a1, KERNEL_STACK_SIZE |
| |
| movi a2, 0x00040001 # WOE=1, INTLEVEL=1, UM=0 |
| wsr a2, PS # (enable reg-windows; progmode stack) |
| rsync |
| |
| /* Set up EXCSAVE[DEBUGLEVEL] to point to the Debug Exception Handler.*/ |
| |
| movi a2, debug_exception |
| wsr a2, EXCSAVE + XCHAL_DEBUGLEVEL |
| |
| /* Set up EXCSAVE[1] to point to the exc_table. */ |
| |
| movi a6, exc_table |
| xsr a6, EXCSAVE_1 |
| |
| /* init_arch kick-starts the linux kernel */ |
| |
| movi a4, init_arch |
| callx4 a4 |
| |
| movi a4, start_kernel |
| callx4 a4 |
| |
| should_never_return: |
| j should_never_return |
| |
| |
| /* |
| * BSS section |
| */ |
| |
| __PAGE_ALIGNED_BSS |
| #ifdef CONFIG_MMU |
| ENTRY(swapper_pg_dir) |
| .fill PAGE_SIZE, 1, 0 |
| #endif |
| ENTRY(empty_zero_page) |
| .fill PAGE_SIZE, 1, 0 |