| /* |
| * Smp support for ppc. |
| * |
| * Written by Cort Dougan (cort@cs.nmt.edu) borrowing a great |
| * deal of code from the sparc and intel versions. |
| * |
| * Copyright (C) 1999 Cort Dougan <cort@cs.nmt.edu> |
| * |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/sched.h> |
| #include <linux/smp.h> |
| #include <linux/smp_lock.h> |
| #include <linux/interrupt.h> |
| #include <linux/kernel_stat.h> |
| #include <linux/delay.h> |
| #include <linux/init.h> |
| #include <linux/spinlock.h> |
| #include <linux/cache.h> |
| |
| #include <asm/ptrace.h> |
| #include <asm/atomic.h> |
| #include <asm/irq.h> |
| #include <asm/page.h> |
| #include <asm/pgtable.h> |
| #include <asm/io.h> |
| #include <asm/prom.h> |
| #include <asm/smp.h> |
| #include <asm/residual.h> |
| #include <asm/time.h> |
| #include <asm/thread_info.h> |
| #include <asm/tlbflush.h> |
| #include <asm/xmon.h> |
| #include <asm/machdep.h> |
| |
| volatile int smp_commenced; |
| int smp_tb_synchronized; |
| struct cpuinfo_PPC cpu_data[NR_CPUS]; |
| atomic_t ipi_recv; |
| atomic_t ipi_sent; |
| cpumask_t cpu_online_map; |
| cpumask_t cpu_possible_map; |
| int smp_hw_index[NR_CPUS]; |
| struct thread_info *secondary_ti; |
| static struct task_struct *idle_tasks[NR_CPUS]; |
| |
| EXPORT_SYMBOL(cpu_online_map); |
| EXPORT_SYMBOL(cpu_possible_map); |
| |
| /* SMP operations for this machine */ |
| struct smp_ops_t *smp_ops; |
| |
| /* all cpu mappings are 1-1 -- Cort */ |
| volatile unsigned long cpu_callin_map[NR_CPUS]; |
| |
| int start_secondary(void *); |
| void smp_call_function_interrupt(void); |
| static int __smp_call_function(void (*func) (void *info), void *info, |
| int wait, int target); |
| |
| /* Low level assembly function used to backup CPU 0 state */ |
| extern void __save_cpu_setup(void); |
| |
| /* Since OpenPIC has only 4 IPIs, we use slightly different message numbers. |
| * |
| * Make sure this matches openpic_request_IPIs in open_pic.c, or what shows up |
| * in /proc/interrupts will be wrong!!! --Troy */ |
| #define PPC_MSG_CALL_FUNCTION 0 |
| #define PPC_MSG_RESCHEDULE 1 |
| #define PPC_MSG_INVALIDATE_TLB 2 |
| #define PPC_MSG_XMON_BREAK 3 |
| |
| static inline void |
| smp_message_pass(int target, int msg) |
| { |
| if (smp_ops) { |
| atomic_inc(&ipi_sent); |
| smp_ops->message_pass(target, msg); |
| } |
| } |
| |
| /* |
| * Common functions |
| */ |
| void smp_message_recv(int msg, struct pt_regs *regs) |
| { |
| atomic_inc(&ipi_recv); |
| |
| switch( msg ) { |
| case PPC_MSG_CALL_FUNCTION: |
| smp_call_function_interrupt(); |
| break; |
| case PPC_MSG_RESCHEDULE: |
| set_need_resched(); |
| break; |
| case PPC_MSG_INVALIDATE_TLB: |
| _tlbia(); |
| break; |
| #ifdef CONFIG_XMON |
| case PPC_MSG_XMON_BREAK: |
| xmon(regs); |
| break; |
| #endif /* CONFIG_XMON */ |
| default: |
| printk("SMP %d: smp_message_recv(): unknown msg %d\n", |
| smp_processor_id(), msg); |
| break; |
| } |
| } |
| |
| /* |
| * 750's don't broadcast tlb invalidates so |
| * we have to emulate that behavior. |
| * -- Cort |
| */ |
| void smp_send_tlb_invalidate(int cpu) |
| { |
| if ( PVR_VER(mfspr(SPRN_PVR)) == 8 ) |
| smp_message_pass(MSG_ALL_BUT_SELF, PPC_MSG_INVALIDATE_TLB); |
| } |
| |
| void smp_send_reschedule(int cpu) |
| { |
| /* |
| * This is only used if `cpu' is running an idle task, |
| * so it will reschedule itself anyway... |
| * |
| * This isn't the case anymore since the other CPU could be |
| * sleeping and won't reschedule until the next interrupt (such |
| * as the timer). |
| * -- Cort |
| */ |
| /* This is only used if `cpu' is running an idle task, |
| so it will reschedule itself anyway... */ |
| smp_message_pass(cpu, PPC_MSG_RESCHEDULE); |
| } |
| |
| #ifdef CONFIG_XMON |
| void smp_send_xmon_break(int cpu) |
| { |
| smp_message_pass(cpu, PPC_MSG_XMON_BREAK); |
| } |
| #endif /* CONFIG_XMON */ |
| |
| static void stop_this_cpu(void *dummy) |
| { |
| local_irq_disable(); |
| while (1) |
| ; |
| } |
| |
| void smp_send_stop(void) |
| { |
| smp_call_function(stop_this_cpu, NULL, 1, 0); |
| } |
| |
| /* |
| * Structure and data for smp_call_function(). This is designed to minimise |
| * static memory requirements. It also looks cleaner. |
| * Stolen from the i386 version. |
| */ |
| static DEFINE_SPINLOCK(call_lock); |
| |
| static struct call_data_struct { |
| void (*func) (void *info); |
| void *info; |
| atomic_t started; |
| atomic_t finished; |
| int wait; |
| } *call_data; |
| |
| /* |
| * this function sends a 'generic call function' IPI to all other CPUs |
| * in the system. |
| */ |
| |
| int smp_call_function(void (*func) (void *info), void *info, int nonatomic, |
| int wait) |
| /* |
| * [SUMMARY] Run a function on all other CPUs. |
| * <func> The function to run. This must be fast and non-blocking. |
| * <info> An arbitrary pointer to pass to the function. |
| * <nonatomic> currently unused. |
| * <wait> If true, wait (atomically) until function has completed on other CPUs. |
| * [RETURNS] 0 on success, else a negative status code. Does not return until |
| * remote CPUs are nearly ready to execute <<func>> or are or have executed. |
| * |
| * You must not call this function with disabled interrupts or from a |
| * hardware interrupt handler or from a bottom half handler. |
| */ |
| { |
| /* FIXME: get cpu lock with hotplug cpus, or change this to |
| bitmask. --RR */ |
| if (num_online_cpus() <= 1) |
| return 0; |
| /* Can deadlock when called with interrupts disabled */ |
| WARN_ON(irqs_disabled()); |
| return __smp_call_function(func, info, wait, MSG_ALL_BUT_SELF); |
| } |
| |
| static int __smp_call_function(void (*func) (void *info), void *info, |
| int wait, int target) |
| { |
| struct call_data_struct data; |
| int ret = -1; |
| int timeout; |
| int ncpus = 1; |
| |
| if (target == MSG_ALL_BUT_SELF) |
| ncpus = num_online_cpus() - 1; |
| else if (target == MSG_ALL) |
| ncpus = num_online_cpus(); |
| |
| data.func = func; |
| data.info = info; |
| atomic_set(&data.started, 0); |
| data.wait = wait; |
| if (wait) |
| atomic_set(&data.finished, 0); |
| |
| spin_lock(&call_lock); |
| call_data = &data; |
| /* Send a message to all other CPUs and wait for them to respond */ |
| smp_message_pass(target, PPC_MSG_CALL_FUNCTION); |
| |
| /* Wait for response */ |
| timeout = 1000000; |
| while (atomic_read(&data.started) != ncpus) { |
| if (--timeout == 0) { |
| printk("smp_call_function on cpu %d: other cpus not responding (%d)\n", |
| smp_processor_id(), atomic_read(&data.started)); |
| goto out; |
| } |
| barrier(); |
| udelay(1); |
| } |
| |
| if (wait) { |
| timeout = 1000000; |
| while (atomic_read(&data.finished) != ncpus) { |
| if (--timeout == 0) { |
| printk("smp_call_function on cpu %d: other cpus not finishing (%d/%d)\n", |
| smp_processor_id(), atomic_read(&data.finished), atomic_read(&data.started)); |
| goto out; |
| } |
| barrier(); |
| udelay(1); |
| } |
| } |
| ret = 0; |
| |
| out: |
| spin_unlock(&call_lock); |
| return ret; |
| } |
| |
| void smp_call_function_interrupt(void) |
| { |
| void (*func) (void *info) = call_data->func; |
| void *info = call_data->info; |
| int wait = call_data->wait; |
| |
| /* |
| * Notify initiating CPU that I've grabbed the data and am |
| * about to execute the function |
| */ |
| atomic_inc(&call_data->started); |
| /* |
| * At this point the info structure may be out of scope unless wait==1 |
| */ |
| (*func)(info); |
| if (wait) |
| atomic_inc(&call_data->finished); |
| } |
| |
| static void __devinit smp_store_cpu_info(int id) |
| { |
| struct cpuinfo_PPC *c = &cpu_data[id]; |
| |
| /* assume bogomips are same for everything */ |
| c->loops_per_jiffy = loops_per_jiffy; |
| c->pvr = mfspr(SPRN_PVR); |
| } |
| |
| void __init smp_prepare_cpus(unsigned int max_cpus) |
| { |
| int num_cpus, i, cpu; |
| struct task_struct *p; |
| |
| /* Fixup boot cpu */ |
| smp_store_cpu_info(smp_processor_id()); |
| cpu_callin_map[smp_processor_id()] = 1; |
| |
| if (smp_ops == NULL) { |
| printk("SMP not supported on this machine.\n"); |
| return; |
| } |
| |
| /* Probe platform for CPUs: always linear. */ |
| num_cpus = smp_ops->probe(); |
| |
| if (num_cpus < 2) |
| smp_tb_synchronized = 1; |
| |
| for (i = 0; i < num_cpus; ++i) |
| cpu_set(i, cpu_possible_map); |
| |
| /* Backup CPU 0 state */ |
| __save_cpu_setup(); |
| |
| for_each_possible_cpu(cpu) { |
| if (cpu == smp_processor_id()) |
| continue; |
| /* create a process for the processor */ |
| p = fork_idle(cpu); |
| if (IS_ERR(p)) |
| panic("failed fork for CPU %u: %li", cpu, PTR_ERR(p)); |
| task_thread_info(p)->cpu = cpu; |
| idle_tasks[cpu] = p; |
| } |
| } |
| |
| void __devinit smp_prepare_boot_cpu(void) |
| { |
| cpu_set(smp_processor_id(), cpu_online_map); |
| cpu_set(smp_processor_id(), cpu_possible_map); |
| } |
| |
| int __init setup_profiling_timer(unsigned int multiplier) |
| { |
| return 0; |
| } |
| |
| /* Processor coming up starts here */ |
| int __devinit start_secondary(void *unused) |
| { |
| int cpu; |
| |
| atomic_inc(&init_mm.mm_count); |
| current->active_mm = &init_mm; |
| |
| cpu = smp_processor_id(); |
| smp_store_cpu_info(cpu); |
| set_dec(tb_ticks_per_jiffy); |
| preempt_disable(); |
| cpu_callin_map[cpu] = 1; |
| |
| printk("CPU %d done callin...\n", cpu); |
| smp_ops->setup_cpu(cpu); |
| printk("CPU %d done setup...\n", cpu); |
| smp_ops->take_timebase(); |
| printk("CPU %d done timebase take...\n", cpu); |
| |
| spin_lock(&call_lock); |
| cpu_set(cpu, cpu_online_map); |
| spin_unlock(&call_lock); |
| |
| local_irq_enable(); |
| |
| cpu_idle(); |
| return 0; |
| } |
| |
| int __cpu_up(unsigned int cpu) |
| { |
| char buf[32]; |
| int c; |
| |
| secondary_ti = task_thread_info(idle_tasks[cpu]); |
| mb(); |
| |
| /* |
| * There was a cache flush loop here to flush the cache |
| * to memory for the first 8MB of RAM. The cache flush |
| * has been pushed into the kick_cpu function for those |
| * platforms that need it. |
| */ |
| |
| /* wake up cpu */ |
| smp_ops->kick_cpu(cpu); |
| |
| /* |
| * wait to see if the cpu made a callin (is actually up). |
| * use this value that I found through experimentation. |
| * -- Cort |
| */ |
| for (c = 1000; c && !cpu_callin_map[cpu]; c--) |
| udelay(100); |
| |
| if (!cpu_callin_map[cpu]) { |
| sprintf(buf, "didn't find cpu %u", cpu); |
| if (ppc_md.progress) ppc_md.progress(buf, 0x360+cpu); |
| printk("Processor %u is stuck.\n", cpu); |
| return -ENOENT; |
| } |
| |
| sprintf(buf, "found cpu %u", cpu); |
| if (ppc_md.progress) ppc_md.progress(buf, 0x350+cpu); |
| printk("Processor %d found.\n", cpu); |
| |
| smp_ops->give_timebase(); |
| |
| /* Wait until cpu puts itself in the online map */ |
| while (!cpu_online(cpu)) |
| cpu_relax(); |
| |
| return 0; |
| } |
| |
| void smp_cpus_done(unsigned int max_cpus) |
| { |
| smp_ops->setup_cpu(0); |
| } |