| /* |
| * AMD 10Gb Ethernet driver |
| * |
| * This file is available to you under your choice of the following two |
| * licenses: |
| * |
| * License 1: GPLv2 |
| * |
| * Copyright (c) 2014 Advanced Micro Devices, Inc. |
| * |
| * This file is free software; you may copy, redistribute and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation, either version 2 of the License, or (at |
| * your option) any later version. |
| * |
| * This file is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program. If not, see <http://www.gnu.org/licenses/>. |
| * |
| * This file incorporates work covered by the following copyright and |
| * permission notice: |
| * The Synopsys DWC ETHER XGMAC Software Driver and documentation |
| * (hereinafter "Software") is an unsupported proprietary work of Synopsys, |
| * Inc. unless otherwise expressly agreed to in writing between Synopsys |
| * and you. |
| * |
| * The Software IS NOT an item of Licensed Software or Licensed Product |
| * under any End User Software License Agreement or Agreement for Licensed |
| * Product with Synopsys or any supplement thereto. Permission is hereby |
| * granted, free of charge, to any person obtaining a copy of this software |
| * annotated with this license and the Software, to deal in the Software |
| * without restriction, including without limitation the rights to use, |
| * copy, modify, merge, publish, distribute, sublicense, and/or sell copies |
| * of the Software, and to permit persons to whom the Software is furnished |
| * to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included |
| * in all copies or substantial portions of the Software. |
| * |
| * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" |
| * BASIS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED |
| * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A |
| * PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS |
| * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
| * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
| * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
| * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF |
| * THE POSSIBILITY OF SUCH DAMAGE. |
| * |
| * |
| * License 2: Modified BSD |
| * |
| * Copyright (c) 2014 Advanced Micro Devices, Inc. |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are met: |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * * Neither the name of Advanced Micro Devices, Inc. nor the |
| * names of its contributors may be used to endorse or promote products |
| * derived from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL <COPYRIGHT HOLDER> BE LIABLE FOR ANY |
| * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES |
| * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
| * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND |
| * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF |
| * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| * |
| * This file incorporates work covered by the following copyright and |
| * permission notice: |
| * The Synopsys DWC ETHER XGMAC Software Driver and documentation |
| * (hereinafter "Software") is an unsupported proprietary work of Synopsys, |
| * Inc. unless otherwise expressly agreed to in writing between Synopsys |
| * and you. |
| * |
| * The Software IS NOT an item of Licensed Software or Licensed Product |
| * under any End User Software License Agreement or Agreement for Licensed |
| * Product with Synopsys or any supplement thereto. Permission is hereby |
| * granted, free of charge, to any person obtaining a copy of this software |
| * annotated with this license and the Software, to deal in the Software |
| * without restriction, including without limitation the rights to use, |
| * copy, modify, merge, publish, distribute, sublicense, and/or sell copies |
| * of the Software, and to permit persons to whom the Software is furnished |
| * to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included |
| * in all copies or substantial portions of the Software. |
| * |
| * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" |
| * BASIS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED |
| * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A |
| * PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS |
| * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
| * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
| * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
| * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF |
| * THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/device.h> |
| #include <linux/platform_device.h> |
| #include <linux/spinlock.h> |
| #include <linux/netdevice.h> |
| #include <linux/etherdevice.h> |
| #include <linux/io.h> |
| #include <linux/of.h> |
| #include <linux/of_net.h> |
| #include <linux/of_address.h> |
| #include <linux/clk.h> |
| #include <linux/property.h> |
| #include <linux/acpi.h> |
| |
| #include "xgbe.h" |
| #include "xgbe-common.h" |
| |
| MODULE_AUTHOR("Tom Lendacky <thomas.lendacky@amd.com>"); |
| MODULE_LICENSE("Dual BSD/GPL"); |
| MODULE_VERSION(XGBE_DRV_VERSION); |
| MODULE_DESCRIPTION(XGBE_DRV_DESC); |
| |
| static void xgbe_default_config(struct xgbe_prv_data *pdata) |
| { |
| DBGPR("-->xgbe_default_config\n"); |
| |
| pdata->pblx8 = DMA_PBL_X8_ENABLE; |
| pdata->tx_sf_mode = MTL_TSF_ENABLE; |
| pdata->tx_threshold = MTL_TX_THRESHOLD_64; |
| pdata->tx_pbl = DMA_PBL_16; |
| pdata->tx_osp_mode = DMA_OSP_ENABLE; |
| pdata->rx_sf_mode = MTL_RSF_DISABLE; |
| pdata->rx_threshold = MTL_RX_THRESHOLD_64; |
| pdata->rx_pbl = DMA_PBL_16; |
| pdata->pause_autoneg = 1; |
| pdata->tx_pause = 1; |
| pdata->rx_pause = 1; |
| pdata->phy_speed = SPEED_UNKNOWN; |
| pdata->power_down = 0; |
| pdata->default_autoneg = AUTONEG_ENABLE; |
| pdata->default_speed = SPEED_10000; |
| |
| DBGPR("<--xgbe_default_config\n"); |
| } |
| |
| static void xgbe_init_all_fptrs(struct xgbe_prv_data *pdata) |
| { |
| xgbe_init_function_ptrs_dev(&pdata->hw_if); |
| xgbe_init_function_ptrs_desc(&pdata->desc_if); |
| } |
| |
| #ifdef CONFIG_ACPI |
| static int xgbe_acpi_support(struct xgbe_prv_data *pdata) |
| { |
| struct acpi_device *adev = pdata->adev; |
| struct device *dev = pdata->dev; |
| u32 property; |
| acpi_handle handle; |
| acpi_status status; |
| unsigned long long data; |
| int cca; |
| int ret; |
| |
| /* Obtain the system clock setting */ |
| ret = device_property_read_u32(dev, XGBE_ACPI_DMA_FREQ, &property); |
| if (ret) { |
| dev_err(dev, "unable to obtain %s property\n", |
| XGBE_ACPI_DMA_FREQ); |
| return ret; |
| } |
| pdata->sysclk_rate = property; |
| |
| /* Obtain the PTP clock setting */ |
| ret = device_property_read_u32(dev, XGBE_ACPI_PTP_FREQ, &property); |
| if (ret) { |
| dev_err(dev, "unable to obtain %s property\n", |
| XGBE_ACPI_PTP_FREQ); |
| return ret; |
| } |
| pdata->ptpclk_rate = property; |
| |
| /* Retrieve the device cache coherency value */ |
| handle = adev->handle; |
| do { |
| status = acpi_evaluate_integer(handle, "_CCA", NULL, &data); |
| if (!ACPI_FAILURE(status)) { |
| cca = data; |
| break; |
| } |
| |
| status = acpi_get_parent(handle, &handle); |
| } while (!ACPI_FAILURE(status)); |
| |
| if (ACPI_FAILURE(status)) { |
| dev_err(dev, "error obtaining acpi coherency value\n"); |
| return -EINVAL; |
| } |
| pdata->coherent = !!cca; |
| |
| return 0; |
| } |
| #else /* CONFIG_ACPI */ |
| static int xgbe_acpi_support(struct xgbe_prv_data *pdata) |
| { |
| return -EINVAL; |
| } |
| #endif /* CONFIG_ACPI */ |
| |
| #ifdef CONFIG_OF |
| static int xgbe_of_support(struct xgbe_prv_data *pdata) |
| { |
| struct device *dev = pdata->dev; |
| |
| /* Obtain the system clock setting */ |
| pdata->sysclk = devm_clk_get(dev, XGBE_DMA_CLOCK); |
| if (IS_ERR(pdata->sysclk)) { |
| dev_err(dev, "dma devm_clk_get failed\n"); |
| return PTR_ERR(pdata->sysclk); |
| } |
| pdata->sysclk_rate = clk_get_rate(pdata->sysclk); |
| |
| /* Obtain the PTP clock setting */ |
| pdata->ptpclk = devm_clk_get(dev, XGBE_PTP_CLOCK); |
| if (IS_ERR(pdata->ptpclk)) { |
| dev_err(dev, "ptp devm_clk_get failed\n"); |
| return PTR_ERR(pdata->ptpclk); |
| } |
| pdata->ptpclk_rate = clk_get_rate(pdata->ptpclk); |
| |
| /* Retrieve the device cache coherency value */ |
| pdata->coherent = of_dma_is_coherent(dev->of_node); |
| |
| return 0; |
| } |
| #else /* CONFIG_OF */ |
| static int xgbe_of_support(struct xgbe_prv_data *pdata) |
| { |
| return -EINVAL; |
| } |
| #endif /*CONFIG_OF */ |
| |
| static int xgbe_probe(struct platform_device *pdev) |
| { |
| struct xgbe_prv_data *pdata; |
| struct xgbe_hw_if *hw_if; |
| struct xgbe_desc_if *desc_if; |
| struct net_device *netdev; |
| struct device *dev = &pdev->dev; |
| struct resource *res; |
| const char *phy_mode; |
| unsigned int i; |
| int ret; |
| |
| DBGPR("--> xgbe_probe\n"); |
| |
| netdev = alloc_etherdev_mq(sizeof(struct xgbe_prv_data), |
| XGBE_MAX_DMA_CHANNELS); |
| if (!netdev) { |
| dev_err(dev, "alloc_etherdev failed\n"); |
| ret = -ENOMEM; |
| goto err_alloc; |
| } |
| SET_NETDEV_DEV(netdev, dev); |
| pdata = netdev_priv(netdev); |
| pdata->netdev = netdev; |
| pdata->pdev = pdev; |
| pdata->adev = ACPI_COMPANION(dev); |
| pdata->dev = dev; |
| platform_set_drvdata(pdev, netdev); |
| |
| spin_lock_init(&pdata->lock); |
| mutex_init(&pdata->xpcs_mutex); |
| mutex_init(&pdata->rss_mutex); |
| spin_lock_init(&pdata->tstamp_lock); |
| |
| /* Check if we should use ACPI or DT */ |
| pdata->use_acpi = (!pdata->adev || acpi_disabled) ? 0 : 1; |
| |
| /* Set and validate the number of descriptors for a ring */ |
| BUILD_BUG_ON_NOT_POWER_OF_2(XGBE_TX_DESC_CNT); |
| pdata->tx_desc_count = XGBE_TX_DESC_CNT; |
| if (pdata->tx_desc_count & (pdata->tx_desc_count - 1)) { |
| dev_err(dev, "tx descriptor count (%d) is not valid\n", |
| pdata->tx_desc_count); |
| ret = -EINVAL; |
| goto err_io; |
| } |
| BUILD_BUG_ON_NOT_POWER_OF_2(XGBE_RX_DESC_CNT); |
| pdata->rx_desc_count = XGBE_RX_DESC_CNT; |
| if (pdata->rx_desc_count & (pdata->rx_desc_count - 1)) { |
| dev_err(dev, "rx descriptor count (%d) is not valid\n", |
| pdata->rx_desc_count); |
| ret = -EINVAL; |
| goto err_io; |
| } |
| |
| /* Obtain the mmio areas for the device */ |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| pdata->xgmac_regs = devm_ioremap_resource(dev, res); |
| if (IS_ERR(pdata->xgmac_regs)) { |
| dev_err(dev, "xgmac ioremap failed\n"); |
| ret = PTR_ERR(pdata->xgmac_regs); |
| goto err_io; |
| } |
| DBGPR(" xgmac_regs = %p\n", pdata->xgmac_regs); |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 1); |
| pdata->xpcs_regs = devm_ioremap_resource(dev, res); |
| if (IS_ERR(pdata->xpcs_regs)) { |
| dev_err(dev, "xpcs ioremap failed\n"); |
| ret = PTR_ERR(pdata->xpcs_regs); |
| goto err_io; |
| } |
| DBGPR(" xpcs_regs = %p\n", pdata->xpcs_regs); |
| |
| /* Retrieve the MAC address */ |
| ret = device_property_read_u8_array(dev, XGBE_MAC_ADDR_PROPERTY, |
| pdata->mac_addr, |
| sizeof(pdata->mac_addr)); |
| if (ret || !is_valid_ether_addr(pdata->mac_addr)) { |
| dev_err(dev, "invalid %s property\n", XGBE_MAC_ADDR_PROPERTY); |
| if (!ret) |
| ret = -EINVAL; |
| goto err_io; |
| } |
| |
| /* Retrieve the PHY mode - it must be "xgmii" */ |
| ret = device_property_read_string(dev, XGBE_PHY_MODE_PROPERTY, |
| &phy_mode); |
| if (ret || strcmp(phy_mode, phy_modes(PHY_INTERFACE_MODE_XGMII))) { |
| dev_err(dev, "invalid %s property\n", XGBE_PHY_MODE_PROPERTY); |
| if (!ret) |
| ret = -EINVAL; |
| goto err_io; |
| } |
| pdata->phy_mode = PHY_INTERFACE_MODE_XGMII; |
| |
| /* Check for per channel interrupt support */ |
| if (device_property_present(dev, XGBE_DMA_IRQS_PROPERTY)) |
| pdata->per_channel_irq = 1; |
| |
| /* Obtain device settings unique to ACPI/OF */ |
| if (pdata->use_acpi) |
| ret = xgbe_acpi_support(pdata); |
| else |
| ret = xgbe_of_support(pdata); |
| if (ret) |
| goto err_io; |
| |
| /* Set the DMA coherency values */ |
| if (pdata->coherent) { |
| pdata->axdomain = XGBE_DMA_OS_AXDOMAIN; |
| pdata->arcache = XGBE_DMA_OS_ARCACHE; |
| pdata->awcache = XGBE_DMA_OS_AWCACHE; |
| } else { |
| pdata->axdomain = XGBE_DMA_SYS_AXDOMAIN; |
| pdata->arcache = XGBE_DMA_SYS_ARCACHE; |
| pdata->awcache = XGBE_DMA_SYS_AWCACHE; |
| } |
| |
| /* Get the device interrupt */ |
| ret = platform_get_irq(pdev, 0); |
| if (ret < 0) { |
| dev_err(dev, "platform_get_irq 0 failed\n"); |
| goto err_io; |
| } |
| pdata->dev_irq = ret; |
| |
| netdev->irq = pdata->dev_irq; |
| netdev->base_addr = (unsigned long)pdata->xgmac_regs; |
| memcpy(netdev->dev_addr, pdata->mac_addr, netdev->addr_len); |
| |
| /* Set all the function pointers */ |
| xgbe_init_all_fptrs(pdata); |
| hw_if = &pdata->hw_if; |
| desc_if = &pdata->desc_if; |
| |
| /* Issue software reset to device */ |
| hw_if->exit(pdata); |
| |
| /* Populate the hardware features */ |
| xgbe_get_all_hw_features(pdata); |
| |
| /* Set default configuration data */ |
| xgbe_default_config(pdata); |
| |
| /* Set the DMA mask */ |
| if (!dev->dma_mask) |
| dev->dma_mask = &dev->coherent_dma_mask; |
| ret = dma_set_mask_and_coherent(dev, |
| DMA_BIT_MASK(pdata->hw_feat.dma_width)); |
| if (ret) { |
| dev_err(dev, "dma_set_mask_and_coherent failed\n"); |
| goto err_io; |
| } |
| |
| /* Calculate the number of Tx and Rx rings to be created |
| * -Tx (DMA) Channels map 1-to-1 to Tx Queues so set |
| * the number of Tx queues to the number of Tx channels |
| * enabled |
| * -Rx (DMA) Channels do not map 1-to-1 so use the actual |
| * number of Rx queues |
| */ |
| pdata->tx_ring_count = min_t(unsigned int, num_online_cpus(), |
| pdata->hw_feat.tx_ch_cnt); |
| pdata->tx_q_count = pdata->tx_ring_count; |
| ret = netif_set_real_num_tx_queues(netdev, pdata->tx_ring_count); |
| if (ret) { |
| dev_err(dev, "error setting real tx queue count\n"); |
| goto err_io; |
| } |
| |
| pdata->rx_ring_count = min_t(unsigned int, |
| netif_get_num_default_rss_queues(), |
| pdata->hw_feat.rx_ch_cnt); |
| pdata->rx_q_count = pdata->hw_feat.rx_q_cnt; |
| ret = netif_set_real_num_rx_queues(netdev, pdata->rx_ring_count); |
| if (ret) { |
| dev_err(dev, "error setting real rx queue count\n"); |
| goto err_io; |
| } |
| |
| /* Initialize RSS hash key and lookup table */ |
| netdev_rss_key_fill(pdata->rss_key, sizeof(pdata->rss_key)); |
| |
| for (i = 0; i < XGBE_RSS_MAX_TABLE_SIZE; i++) |
| XGMAC_SET_BITS(pdata->rss_table[i], MAC_RSSDR, DMCH, |
| i % pdata->rx_ring_count); |
| |
| XGMAC_SET_BITS(pdata->rss_options, MAC_RSSCR, IP2TE, 1); |
| XGMAC_SET_BITS(pdata->rss_options, MAC_RSSCR, TCP4TE, 1); |
| XGMAC_SET_BITS(pdata->rss_options, MAC_RSSCR, UDP4TE, 1); |
| |
| /* Prepare to regsiter with MDIO */ |
| pdata->mii_bus_id = kasprintf(GFP_KERNEL, "%s", pdev->name); |
| if (!pdata->mii_bus_id) { |
| dev_err(dev, "failed to allocate mii bus id\n"); |
| ret = -ENOMEM; |
| goto err_io; |
| } |
| ret = xgbe_mdio_register(pdata); |
| if (ret) |
| goto err_bus_id; |
| |
| /* Set device operations */ |
| netdev->netdev_ops = xgbe_get_netdev_ops(); |
| netdev->ethtool_ops = xgbe_get_ethtool_ops(); |
| #ifdef CONFIG_AMD_XGBE_DCB |
| netdev->dcbnl_ops = xgbe_get_dcbnl_ops(); |
| #endif |
| |
| /* Set device features */ |
| netdev->hw_features = NETIF_F_SG | |
| NETIF_F_IP_CSUM | |
| NETIF_F_IPV6_CSUM | |
| NETIF_F_RXCSUM | |
| NETIF_F_TSO | |
| NETIF_F_TSO6 | |
| NETIF_F_GRO | |
| NETIF_F_HW_VLAN_CTAG_RX | |
| NETIF_F_HW_VLAN_CTAG_TX | |
| NETIF_F_HW_VLAN_CTAG_FILTER; |
| |
| if (pdata->hw_feat.rss) |
| netdev->hw_features |= NETIF_F_RXHASH; |
| |
| netdev->vlan_features |= NETIF_F_SG | |
| NETIF_F_IP_CSUM | |
| NETIF_F_IPV6_CSUM | |
| NETIF_F_TSO | |
| NETIF_F_TSO6; |
| |
| netdev->features |= netdev->hw_features; |
| pdata->netdev_features = netdev->features; |
| |
| netdev->priv_flags |= IFF_UNICAST_FLT; |
| |
| /* Use default watchdog timeout */ |
| netdev->watchdog_timeo = 0; |
| |
| xgbe_init_rx_coalesce(pdata); |
| xgbe_init_tx_coalesce(pdata); |
| |
| netif_carrier_off(netdev); |
| ret = register_netdev(netdev); |
| if (ret) { |
| dev_err(dev, "net device registration failed\n"); |
| goto err_reg_netdev; |
| } |
| |
| xgbe_ptp_register(pdata); |
| |
| xgbe_debugfs_init(pdata); |
| |
| netdev_notice(netdev, "net device enabled\n"); |
| |
| DBGPR("<-- xgbe_probe\n"); |
| |
| return 0; |
| |
| err_reg_netdev: |
| xgbe_mdio_unregister(pdata); |
| |
| err_bus_id: |
| kfree(pdata->mii_bus_id); |
| |
| err_io: |
| free_netdev(netdev); |
| |
| err_alloc: |
| dev_notice(dev, "net device not enabled\n"); |
| |
| return ret; |
| } |
| |
| static int xgbe_remove(struct platform_device *pdev) |
| { |
| struct net_device *netdev = platform_get_drvdata(pdev); |
| struct xgbe_prv_data *pdata = netdev_priv(netdev); |
| |
| DBGPR("-->xgbe_remove\n"); |
| |
| xgbe_debugfs_exit(pdata); |
| |
| xgbe_ptp_unregister(pdata); |
| |
| unregister_netdev(netdev); |
| |
| xgbe_mdio_unregister(pdata); |
| |
| kfree(pdata->mii_bus_id); |
| |
| free_netdev(netdev); |
| |
| DBGPR("<--xgbe_remove\n"); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM |
| static int xgbe_suspend(struct device *dev) |
| { |
| struct net_device *netdev = dev_get_drvdata(dev); |
| int ret; |
| |
| DBGPR("-->xgbe_suspend\n"); |
| |
| if (!netif_running(netdev)) { |
| DBGPR("<--xgbe_dev_suspend\n"); |
| return -EINVAL; |
| } |
| |
| ret = xgbe_powerdown(netdev, XGMAC_DRIVER_CONTEXT); |
| |
| DBGPR("<--xgbe_suspend\n"); |
| |
| return ret; |
| } |
| |
| static int xgbe_resume(struct device *dev) |
| { |
| struct net_device *netdev = dev_get_drvdata(dev); |
| int ret; |
| |
| DBGPR("-->xgbe_resume\n"); |
| |
| if (!netif_running(netdev)) { |
| DBGPR("<--xgbe_dev_resume\n"); |
| return -EINVAL; |
| } |
| |
| ret = xgbe_powerup(netdev, XGMAC_DRIVER_CONTEXT); |
| |
| DBGPR("<--xgbe_resume\n"); |
| |
| return ret; |
| } |
| #endif /* CONFIG_PM */ |
| |
| #ifdef CONFIG_ACPI |
| static const struct acpi_device_id xgbe_acpi_match[] = { |
| { "AMDI8001", 0 }, |
| {}, |
| }; |
| |
| MODULE_DEVICE_TABLE(acpi, xgbe_acpi_match); |
| #endif |
| |
| #ifdef CONFIG_OF |
| static const struct of_device_id xgbe_of_match[] = { |
| { .compatible = "amd,xgbe-seattle-v1a", }, |
| {}, |
| }; |
| |
| MODULE_DEVICE_TABLE(of, xgbe_of_match); |
| #endif |
| |
| static SIMPLE_DEV_PM_OPS(xgbe_pm_ops, xgbe_suspend, xgbe_resume); |
| |
| static struct platform_driver xgbe_driver = { |
| .driver = { |
| .name = "amd-xgbe", |
| #ifdef CONFIG_ACPI |
| .acpi_match_table = xgbe_acpi_match, |
| #endif |
| #ifdef CONFIG_OF |
| .of_match_table = xgbe_of_match, |
| #endif |
| .pm = &xgbe_pm_ops, |
| }, |
| .probe = xgbe_probe, |
| .remove = xgbe_remove, |
| }; |
| |
| module_platform_driver(xgbe_driver); |