| /* |
| * IDT CPS Gen.2 Serial RapidIO switch family support |
| * |
| * Copyright 2010 Integrated Device Technology, Inc. |
| * Alexandre Bounine <alexandre.bounine@idt.com> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| */ |
| |
| #include <linux/rio.h> |
| #include <linux/rio_drv.h> |
| #include <linux/rio_ids.h> |
| #include <linux/delay.h> |
| #include "../rio.h" |
| |
| #define LOCAL_RTE_CONF_DESTID_SEL 0x010070 |
| #define LOCAL_RTE_CONF_DESTID_SEL_PSEL 0x0000001f |
| |
| #define IDT_LT_ERR_REPORT_EN 0x03100c |
| |
| #define IDT_PORT_ERR_REPORT_EN(n) (0x031044 + (n)*0x40) |
| #define IDT_PORT_ERR_REPORT_EN_BC 0x03ff04 |
| |
| #define IDT_PORT_ISERR_REPORT_EN(n) (0x03104C + (n)*0x40) |
| #define IDT_PORT_ISERR_REPORT_EN_BC 0x03ff0c |
| #define IDT_PORT_INIT_TX_ACQUIRED 0x00000020 |
| |
| #define IDT_LANE_ERR_REPORT_EN(n) (0x038010 + (n)*0x100) |
| #define IDT_LANE_ERR_REPORT_EN_BC 0x03ff10 |
| |
| #define IDT_DEV_CTRL_1 0xf2000c |
| #define IDT_DEV_CTRL_1_GENPW 0x02000000 |
| #define IDT_DEV_CTRL_1_PRSTBEH 0x00000001 |
| |
| #define IDT_CFGBLK_ERR_CAPTURE_EN 0x020008 |
| #define IDT_CFGBLK_ERR_REPORT 0xf20014 |
| #define IDT_CFGBLK_ERR_REPORT_GENPW 0x00000002 |
| |
| #define IDT_AUX_PORT_ERR_CAP_EN 0x020000 |
| #define IDT_AUX_ERR_REPORT_EN 0xf20018 |
| #define IDT_AUX_PORT_ERR_LOG_I2C 0x00000002 |
| #define IDT_AUX_PORT_ERR_LOG_JTAG 0x00000001 |
| |
| #define IDT_ISLTL_ADDRESS_CAP 0x021014 |
| |
| #define IDT_RIO_DOMAIN 0xf20020 |
| #define IDT_RIO_DOMAIN_MASK 0x000000ff |
| |
| #define IDT_PW_INFO_CSR 0xf20024 |
| |
| #define IDT_SOFT_RESET 0xf20040 |
| #define IDT_SOFT_RESET_REQ 0x00030097 |
| |
| #define IDT_I2C_MCTRL 0xf20050 |
| #define IDT_I2C_MCTRL_GENPW 0x04000000 |
| |
| #define IDT_JTAG_CTRL 0xf2005c |
| #define IDT_JTAG_CTRL_GENPW 0x00000002 |
| |
| #define IDT_LANE_CTRL(n) (0xff8000 + (n)*0x100) |
| #define IDT_LANE_CTRL_BC 0xffff00 |
| #define IDT_LANE_CTRL_GENPW 0x00200000 |
| #define IDT_LANE_DFE_1_BC 0xffff18 |
| #define IDT_LANE_DFE_2_BC 0xffff1c |
| |
| #define IDT_PORT_OPS(n) (0xf40004 + (n)*0x100) |
| #define IDT_PORT_OPS_GENPW 0x08000000 |
| #define IDT_PORT_OPS_PL_ELOG 0x00000040 |
| #define IDT_PORT_OPS_LL_ELOG 0x00000020 |
| #define IDT_PORT_OPS_LT_ELOG 0x00000010 |
| #define IDT_PORT_OPS_BC 0xf4ff04 |
| |
| #define IDT_PORT_ISERR_DET(n) (0xf40008 + (n)*0x100) |
| |
| #define IDT_ERR_CAP 0xfd0000 |
| #define IDT_ERR_CAP_LOG_OVERWR 0x00000004 |
| |
| #define IDT_ERR_RD 0xfd0004 |
| |
| #define IDT_DEFAULT_ROUTE 0xde |
| #define IDT_NO_ROUTE 0xdf |
| |
| static int |
| idtg2_route_add_entry(struct rio_mport *mport, u16 destid, u8 hopcount, |
| u16 table, u16 route_destid, u8 route_port) |
| { |
| /* |
| * Select routing table to update |
| */ |
| if (table == RIO_GLOBAL_TABLE) |
| table = 0; |
| else |
| table++; |
| |
| rio_mport_write_config_32(mport, destid, hopcount, |
| LOCAL_RTE_CONF_DESTID_SEL, table); |
| |
| /* |
| * Program destination port for the specified destID |
| */ |
| rio_mport_write_config_32(mport, destid, hopcount, |
| RIO_STD_RTE_CONF_DESTID_SEL_CSR, |
| (u32)route_destid); |
| |
| rio_mport_write_config_32(mport, destid, hopcount, |
| RIO_STD_RTE_CONF_PORT_SEL_CSR, |
| (u32)route_port); |
| udelay(10); |
| |
| return 0; |
| } |
| |
| static int |
| idtg2_route_get_entry(struct rio_mport *mport, u16 destid, u8 hopcount, |
| u16 table, u16 route_destid, u8 *route_port) |
| { |
| u32 result; |
| |
| /* |
| * Select routing table to read |
| */ |
| if (table == RIO_GLOBAL_TABLE) |
| table = 0; |
| else |
| table++; |
| |
| rio_mport_write_config_32(mport, destid, hopcount, |
| LOCAL_RTE_CONF_DESTID_SEL, table); |
| |
| rio_mport_write_config_32(mport, destid, hopcount, |
| RIO_STD_RTE_CONF_DESTID_SEL_CSR, |
| route_destid); |
| |
| rio_mport_read_config_32(mport, destid, hopcount, |
| RIO_STD_RTE_CONF_PORT_SEL_CSR, &result); |
| |
| if (IDT_DEFAULT_ROUTE == (u8)result || IDT_NO_ROUTE == (u8)result) |
| *route_port = RIO_INVALID_ROUTE; |
| else |
| *route_port = (u8)result; |
| |
| return 0; |
| } |
| |
| static int |
| idtg2_route_clr_table(struct rio_mport *mport, u16 destid, u8 hopcount, |
| u16 table) |
| { |
| u32 i; |
| |
| /* |
| * Select routing table to read |
| */ |
| if (table == RIO_GLOBAL_TABLE) |
| table = 0; |
| else |
| table++; |
| |
| rio_mport_write_config_32(mport, destid, hopcount, |
| LOCAL_RTE_CONF_DESTID_SEL, table); |
| |
| for (i = RIO_STD_RTE_CONF_EXTCFGEN; |
| i <= (RIO_STD_RTE_CONF_EXTCFGEN | 0xff);) { |
| rio_mport_write_config_32(mport, destid, hopcount, |
| RIO_STD_RTE_CONF_DESTID_SEL_CSR, i); |
| rio_mport_write_config_32(mport, destid, hopcount, |
| RIO_STD_RTE_CONF_PORT_SEL_CSR, |
| (IDT_DEFAULT_ROUTE << 24) | (IDT_DEFAULT_ROUTE << 16) | |
| (IDT_DEFAULT_ROUTE << 8) | IDT_DEFAULT_ROUTE); |
| i += 4; |
| } |
| |
| return 0; |
| } |
| |
| |
| static int |
| idtg2_set_domain(struct rio_mport *mport, u16 destid, u8 hopcount, |
| u8 sw_domain) |
| { |
| /* |
| * Switch domain configuration operates only at global level |
| */ |
| rio_mport_write_config_32(mport, destid, hopcount, |
| IDT_RIO_DOMAIN, (u32)sw_domain); |
| return 0; |
| } |
| |
| static int |
| idtg2_get_domain(struct rio_mport *mport, u16 destid, u8 hopcount, |
| u8 *sw_domain) |
| { |
| u32 regval; |
| |
| /* |
| * Switch domain configuration operates only at global level |
| */ |
| rio_mport_read_config_32(mport, destid, hopcount, |
| IDT_RIO_DOMAIN, ®val); |
| |
| *sw_domain = (u8)(regval & 0xff); |
| |
| return 0; |
| } |
| |
| static int |
| idtg2_em_init(struct rio_dev *rdev) |
| { |
| u32 regval; |
| int i, tmp; |
| |
| /* |
| * This routine performs device-specific initialization only. |
| * All standard EM configuration should be performed at upper level. |
| */ |
| |
| pr_debug("RIO: %s [%d:%d]\n", __func__, rdev->destid, rdev->hopcount); |
| |
| /* Set Port-Write info CSR: PRIO=3 and CRF=1 */ |
| rio_write_config_32(rdev, IDT_PW_INFO_CSR, 0x0000e000); |
| |
| /* |
| * Configure LT LAYER error reporting. |
| */ |
| |
| /* Enable standard (RIO.p8) error reporting */ |
| rio_write_config_32(rdev, IDT_LT_ERR_REPORT_EN, |
| REM_LTL_ERR_ILLTRAN | REM_LTL_ERR_UNSOLR | |
| REM_LTL_ERR_UNSUPTR); |
| |
| /* Use Port-Writes for LT layer error reporting. |
| * Enable per-port reset |
| */ |
| rio_read_config_32(rdev, IDT_DEV_CTRL_1, ®val); |
| rio_write_config_32(rdev, IDT_DEV_CTRL_1, |
| regval | IDT_DEV_CTRL_1_GENPW | IDT_DEV_CTRL_1_PRSTBEH); |
| |
| /* |
| * Configure PORT error reporting. |
| */ |
| |
| /* Report all RIO.p8 errors supported by device */ |
| rio_write_config_32(rdev, IDT_PORT_ERR_REPORT_EN_BC, 0x807e8037); |
| |
| /* Configure reporting of implementation specific errors/events */ |
| rio_write_config_32(rdev, IDT_PORT_ISERR_REPORT_EN_BC, |
| IDT_PORT_INIT_TX_ACQUIRED); |
| |
| /* Use Port-Writes for port error reporting and enable error logging */ |
| tmp = RIO_GET_TOTAL_PORTS(rdev->swpinfo); |
| for (i = 0; i < tmp; i++) { |
| rio_read_config_32(rdev, IDT_PORT_OPS(i), ®val); |
| rio_write_config_32(rdev, |
| IDT_PORT_OPS(i), regval | IDT_PORT_OPS_GENPW | |
| IDT_PORT_OPS_PL_ELOG | |
| IDT_PORT_OPS_LL_ELOG | |
| IDT_PORT_OPS_LT_ELOG); |
| } |
| /* Overwrite error log if full */ |
| rio_write_config_32(rdev, IDT_ERR_CAP, IDT_ERR_CAP_LOG_OVERWR); |
| |
| /* |
| * Configure LANE error reporting. |
| */ |
| |
| /* Disable line error reporting */ |
| rio_write_config_32(rdev, IDT_LANE_ERR_REPORT_EN_BC, 0); |
| |
| /* Use Port-Writes for lane error reporting (when enabled) |
| * (do per-lane update because lanes may have different configuration) |
| */ |
| tmp = (rdev->did == RIO_DID_IDTCPS1848) ? 48 : 16; |
| for (i = 0; i < tmp; i++) { |
| rio_read_config_32(rdev, IDT_LANE_CTRL(i), ®val); |
| rio_write_config_32(rdev, IDT_LANE_CTRL(i), |
| regval | IDT_LANE_CTRL_GENPW); |
| } |
| |
| /* |
| * Configure AUX error reporting. |
| */ |
| |
| /* Disable JTAG and I2C Error capture */ |
| rio_write_config_32(rdev, IDT_AUX_PORT_ERR_CAP_EN, 0); |
| |
| /* Disable JTAG and I2C Error reporting/logging */ |
| rio_write_config_32(rdev, IDT_AUX_ERR_REPORT_EN, 0); |
| |
| /* Disable Port-Write notification from JTAG */ |
| rio_write_config_32(rdev, IDT_JTAG_CTRL, 0); |
| |
| /* Disable Port-Write notification from I2C */ |
| rio_read_config_32(rdev, IDT_I2C_MCTRL, ®val); |
| rio_write_config_32(rdev, IDT_I2C_MCTRL, regval & ~IDT_I2C_MCTRL_GENPW); |
| |
| /* |
| * Configure CFG_BLK error reporting. |
| */ |
| |
| /* Disable Configuration Block error capture */ |
| rio_write_config_32(rdev, IDT_CFGBLK_ERR_CAPTURE_EN, 0); |
| |
| /* Disable Port-Writes for Configuration Block error reporting */ |
| rio_read_config_32(rdev, IDT_CFGBLK_ERR_REPORT, ®val); |
| rio_write_config_32(rdev, IDT_CFGBLK_ERR_REPORT, |
| regval & ~IDT_CFGBLK_ERR_REPORT_GENPW); |
| |
| /* set TVAL = ~50us */ |
| rio_write_config_32(rdev, |
| rdev->phys_efptr + RIO_PORT_LINKTO_CTL_CSR, 0x8e << 8); |
| |
| return 0; |
| } |
| |
| static int |
| idtg2_em_handler(struct rio_dev *rdev, u8 portnum) |
| { |
| u32 regval, em_perrdet, em_ltlerrdet; |
| |
| rio_read_config_32(rdev, |
| rdev->em_efptr + RIO_EM_LTL_ERR_DETECT, &em_ltlerrdet); |
| if (em_ltlerrdet) { |
| /* Service Logical/Transport Layer Error(s) */ |
| if (em_ltlerrdet & REM_LTL_ERR_IMPSPEC) { |
| /* Implementation specific error reported */ |
| rio_read_config_32(rdev, |
| IDT_ISLTL_ADDRESS_CAP, ®val); |
| |
| pr_debug("RIO: %s Implementation Specific LTL errors" \ |
| " 0x%x @(0x%x)\n", |
| rio_name(rdev), em_ltlerrdet, regval); |
| |
| /* Clear implementation specific address capture CSR */ |
| rio_write_config_32(rdev, IDT_ISLTL_ADDRESS_CAP, 0); |
| |
| } |
| } |
| |
| rio_read_config_32(rdev, |
| rdev->em_efptr + RIO_EM_PN_ERR_DETECT(portnum), &em_perrdet); |
| if (em_perrdet) { |
| /* Service Port-Level Error(s) */ |
| if (em_perrdet & REM_PED_IMPL_SPEC) { |
| /* Implementation Specific port error reported */ |
| |
| /* Get IS errors reported */ |
| rio_read_config_32(rdev, |
| IDT_PORT_ISERR_DET(portnum), ®val); |
| |
| pr_debug("RIO: %s Implementation Specific Port" \ |
| " errors 0x%x\n", rio_name(rdev), regval); |
| |
| /* Clear all implementation specific events */ |
| rio_write_config_32(rdev, |
| IDT_PORT_ISERR_DET(portnum), 0); |
| } |
| } |
| |
| return 0; |
| } |
| |
| static ssize_t |
| idtg2_show_errlog(struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| struct rio_dev *rdev = to_rio_dev(dev); |
| ssize_t len = 0; |
| u32 regval; |
| |
| while (!rio_read_config_32(rdev, IDT_ERR_RD, ®val)) { |
| if (!regval) /* 0 = end of log */ |
| break; |
| len += snprintf(buf + len, PAGE_SIZE - len, |
| "%08x\n", regval); |
| if (len >= (PAGE_SIZE - 10)) |
| break; |
| } |
| |
| return len; |
| } |
| |
| static DEVICE_ATTR(errlog, S_IRUGO, idtg2_show_errlog, NULL); |
| |
| static int idtg2_sysfs(struct rio_dev *rdev, int create) |
| { |
| struct device *dev = &rdev->dev; |
| int err = 0; |
| |
| if (create == RIO_SW_SYSFS_CREATE) { |
| /* Initialize sysfs entries */ |
| err = device_create_file(dev, &dev_attr_errlog); |
| if (err) |
| dev_err(dev, "Unable create sysfs errlog file\n"); |
| } else |
| device_remove_file(dev, &dev_attr_errlog); |
| |
| return err; |
| } |
| |
| static int idtg2_switch_init(struct rio_dev *rdev, int do_enum) |
| { |
| pr_debug("RIO: %s for %s\n", __func__, rio_name(rdev)); |
| rdev->rswitch->add_entry = idtg2_route_add_entry; |
| rdev->rswitch->get_entry = idtg2_route_get_entry; |
| rdev->rswitch->clr_table = idtg2_route_clr_table; |
| rdev->rswitch->set_domain = idtg2_set_domain; |
| rdev->rswitch->get_domain = idtg2_get_domain; |
| rdev->rswitch->em_init = idtg2_em_init; |
| rdev->rswitch->em_handle = idtg2_em_handler; |
| rdev->rswitch->sw_sysfs = idtg2_sysfs; |
| |
| return 0; |
| } |
| |
| DECLARE_RIO_SWITCH_INIT(RIO_VID_IDT, RIO_DID_IDTCPS1848, idtg2_switch_init); |
| DECLARE_RIO_SWITCH_INIT(RIO_VID_IDT, RIO_DID_IDTCPS1616, idtg2_switch_init); |
| DECLARE_RIO_SWITCH_INIT(RIO_VID_IDT, RIO_DID_IDTVPS1616, idtg2_switch_init); |
| DECLARE_RIO_SWITCH_INIT(RIO_VID_IDT, RIO_DID_IDTSPS1616, idtg2_switch_init); |
| DECLARE_RIO_SWITCH_INIT(RIO_VID_IDT, RIO_DID_IDTCPS1432, idtg2_switch_init); |