| /* |
| * (C) Copyright 2003-2004 |
| * Humboldt Solutions Ltd, adrian@humboldt.co.uk. |
| |
| * This is a combined i2c adapter and algorithm driver for the |
| * MPC107/Tsi107 PowerPC northbridge and processors that include |
| * the same I2C unit (8240, 8245, 85xx). |
| * |
| * Release 0.8 |
| * |
| * This file is licensed under the terms of the GNU General Public |
| * License version 2. This program is licensed "as is" without any |
| * warranty of any kind, whether express or implied. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/sched.h> |
| #include <linux/init.h> |
| #include <linux/of_platform.h> |
| #include <linux/of_i2c.h> |
| #include <linux/slab.h> |
| |
| #include <linux/io.h> |
| #include <linux/fsl_devices.h> |
| #include <linux/i2c.h> |
| #include <linux/interrupt.h> |
| #include <linux/delay.h> |
| |
| #include <asm/mpc52xx.h> |
| #include <sysdev/fsl_soc.h> |
| |
| #define DRV_NAME "mpc-i2c" |
| |
| #define MPC_I2C_CLOCK_LEGACY 0 |
| #define MPC_I2C_CLOCK_PRESERVE (~0U) |
| |
| #define MPC_I2C_FDR 0x04 |
| #define MPC_I2C_CR 0x08 |
| #define MPC_I2C_SR 0x0c |
| #define MPC_I2C_DR 0x10 |
| #define MPC_I2C_DFSRR 0x14 |
| |
| #define CCR_MEN 0x80 |
| #define CCR_MIEN 0x40 |
| #define CCR_MSTA 0x20 |
| #define CCR_MTX 0x10 |
| #define CCR_TXAK 0x08 |
| #define CCR_RSTA 0x04 |
| |
| #define CSR_MCF 0x80 |
| #define CSR_MAAS 0x40 |
| #define CSR_MBB 0x20 |
| #define CSR_MAL 0x10 |
| #define CSR_SRW 0x04 |
| #define CSR_MIF 0x02 |
| #define CSR_RXAK 0x01 |
| |
| struct mpc_i2c { |
| struct device *dev; |
| void __iomem *base; |
| u32 interrupt; |
| wait_queue_head_t queue; |
| struct i2c_adapter adap; |
| int irq; |
| u32 real_clk; |
| }; |
| |
| struct mpc_i2c_divider { |
| u16 divider; |
| u16 fdr; /* including dfsrr */ |
| }; |
| |
| struct mpc_i2c_data { |
| void (*setup)(struct device_node *node, struct mpc_i2c *i2c, |
| u32 clock, u32 prescaler); |
| u32 prescaler; |
| }; |
| |
| static inline void writeccr(struct mpc_i2c *i2c, u32 x) |
| { |
| writeb(x, i2c->base + MPC_I2C_CR); |
| } |
| |
| static irqreturn_t mpc_i2c_isr(int irq, void *dev_id) |
| { |
| struct mpc_i2c *i2c = dev_id; |
| if (readb(i2c->base + MPC_I2C_SR) & CSR_MIF) { |
| /* Read again to allow register to stabilise */ |
| i2c->interrupt = readb(i2c->base + MPC_I2C_SR); |
| writeb(0, i2c->base + MPC_I2C_SR); |
| wake_up(&i2c->queue); |
| } |
| return IRQ_HANDLED; |
| } |
| |
| /* Sometimes 9th clock pulse isn't generated, and slave doesn't release |
| * the bus, because it wants to send ACK. |
| * Following sequence of enabling/disabling and sending start/stop generates |
| * the 9 pulses, so it's all OK. |
| */ |
| static void mpc_i2c_fixup(struct mpc_i2c *i2c) |
| { |
| int k; |
| u32 delay_val = 1000000 / i2c->real_clk + 1; |
| |
| if (delay_val < 2) |
| delay_val = 2; |
| |
| for (k = 9; k; k--) { |
| writeccr(i2c, 0); |
| writeccr(i2c, CCR_MSTA | CCR_MTX | CCR_MEN); |
| udelay(delay_val); |
| writeccr(i2c, CCR_MEN); |
| udelay(delay_val << 1); |
| } |
| } |
| |
| static int i2c_wait(struct mpc_i2c *i2c, unsigned timeout, int writing) |
| { |
| unsigned long orig_jiffies = jiffies; |
| u32 x; |
| int result = 0; |
| |
| if (!i2c->irq) { |
| while (!(readb(i2c->base + MPC_I2C_SR) & CSR_MIF)) { |
| schedule(); |
| if (time_after(jiffies, orig_jiffies + timeout)) { |
| dev_dbg(i2c->dev, "timeout\n"); |
| writeccr(i2c, 0); |
| result = -EIO; |
| break; |
| } |
| } |
| x = readb(i2c->base + MPC_I2C_SR); |
| writeb(0, i2c->base + MPC_I2C_SR); |
| } else { |
| /* Interrupt mode */ |
| result = wait_event_timeout(i2c->queue, |
| (i2c->interrupt & CSR_MIF), timeout); |
| |
| if (unlikely(!(i2c->interrupt & CSR_MIF))) { |
| dev_dbg(i2c->dev, "wait timeout\n"); |
| writeccr(i2c, 0); |
| result = -ETIMEDOUT; |
| } |
| |
| x = i2c->interrupt; |
| i2c->interrupt = 0; |
| } |
| |
| if (result < 0) |
| return result; |
| |
| if (!(x & CSR_MCF)) { |
| dev_dbg(i2c->dev, "unfinished\n"); |
| return -EIO; |
| } |
| |
| if (x & CSR_MAL) { |
| dev_dbg(i2c->dev, "MAL\n"); |
| return -EIO; |
| } |
| |
| if (writing && (x & CSR_RXAK)) { |
| dev_dbg(i2c->dev, "No RXAK\n"); |
| /* generate stop */ |
| writeccr(i2c, CCR_MEN); |
| return -EIO; |
| } |
| return 0; |
| } |
| |
| #if defined(CONFIG_PPC_MPC52xx) || defined(CONFIG_PPC_MPC512x) |
| static const struct mpc_i2c_divider mpc_i2c_dividers_52xx[] __devinitconst = { |
| {20, 0x20}, {22, 0x21}, {24, 0x22}, {26, 0x23}, |
| {28, 0x24}, {30, 0x01}, {32, 0x25}, {34, 0x02}, |
| {36, 0x26}, {40, 0x27}, {44, 0x04}, {48, 0x28}, |
| {52, 0x63}, {56, 0x29}, {60, 0x41}, {64, 0x2a}, |
| {68, 0x07}, {72, 0x2b}, {80, 0x2c}, {88, 0x09}, |
| {96, 0x2d}, {104, 0x0a}, {112, 0x2e}, {120, 0x81}, |
| {128, 0x2f}, {136, 0x47}, {144, 0x0c}, {160, 0x30}, |
| {176, 0x49}, {192, 0x31}, {208, 0x4a}, {224, 0x32}, |
| {240, 0x0f}, {256, 0x33}, {272, 0x87}, {288, 0x10}, |
| {320, 0x34}, {352, 0x89}, {384, 0x35}, {416, 0x8a}, |
| {448, 0x36}, {480, 0x13}, {512, 0x37}, {576, 0x14}, |
| {640, 0x38}, {768, 0x39}, {896, 0x3a}, {960, 0x17}, |
| {1024, 0x3b}, {1152, 0x18}, {1280, 0x3c}, {1536, 0x3d}, |
| {1792, 0x3e}, {1920, 0x1b}, {2048, 0x3f}, {2304, 0x1c}, |
| {2560, 0x1d}, {3072, 0x1e}, {3584, 0x7e}, {3840, 0x1f}, |
| {4096, 0x7f}, {4608, 0x5c}, {5120, 0x5d}, {6144, 0x5e}, |
| {7168, 0xbe}, {7680, 0x5f}, {8192, 0xbf}, {9216, 0x9c}, |
| {10240, 0x9d}, {12288, 0x9e}, {15360, 0x9f} |
| }; |
| |
| static int __devinit mpc_i2c_get_fdr_52xx(struct device_node *node, u32 clock, |
| int prescaler, u32 *real_clk) |
| { |
| const struct mpc_i2c_divider *div = NULL; |
| unsigned int pvr = mfspr(SPRN_PVR); |
| u32 divider; |
| int i; |
| |
| if (clock == MPC_I2C_CLOCK_LEGACY) { |
| /* see below - default fdr = 0x3f -> div = 2048 */ |
| *real_clk = mpc5xxx_get_bus_frequency(node) / 2048; |
| return -EINVAL; |
| } |
| |
| /* Determine divider value */ |
| divider = mpc5xxx_get_bus_frequency(node) / clock; |
| |
| /* |
| * We want to choose an FDR/DFSR that generates an I2C bus speed that |
| * is equal to or lower than the requested speed. |
| */ |
| for (i = 0; i < ARRAY_SIZE(mpc_i2c_dividers_52xx); i++) { |
| div = &mpc_i2c_dividers_52xx[i]; |
| /* Old MPC5200 rev A CPUs do not support the high bits */ |
| if (div->fdr & 0xc0 && pvr == 0x80822011) |
| continue; |
| if (div->divider >= divider) |
| break; |
| } |
| |
| *real_clk = mpc5xxx_get_bus_frequency(node) / div->divider; |
| return (int)div->fdr; |
| } |
| |
| static void __devinit mpc_i2c_setup_52xx(struct device_node *node, |
| struct mpc_i2c *i2c, |
| u32 clock, u32 prescaler) |
| { |
| int ret, fdr; |
| |
| if (clock == MPC_I2C_CLOCK_PRESERVE) { |
| dev_dbg(i2c->dev, "using fdr %d\n", |
| readb(i2c->base + MPC_I2C_FDR)); |
| return; |
| } |
| |
| ret = mpc_i2c_get_fdr_52xx(node, clock, prescaler, &i2c->real_clk); |
| fdr = (ret >= 0) ? ret : 0x3f; /* backward compatibility */ |
| |
| writeb(fdr & 0xff, i2c->base + MPC_I2C_FDR); |
| |
| if (ret >= 0) |
| dev_info(i2c->dev, "clock %u Hz (fdr=%d)\n", i2c->real_clk, |
| fdr); |
| } |
| #else /* !(CONFIG_PPC_MPC52xx || CONFIG_PPC_MPC512x) */ |
| static void __devinit mpc_i2c_setup_52xx(struct device_node *node, |
| struct mpc_i2c *i2c, |
| u32 clock, u32 prescaler) |
| { |
| } |
| #endif /* CONFIG_PPC_MPC52xx || CONFIG_PPC_MPC512x */ |
| |
| #ifdef CONFIG_PPC_MPC512x |
| static void __devinit mpc_i2c_setup_512x(struct device_node *node, |
| struct mpc_i2c *i2c, |
| u32 clock, u32 prescaler) |
| { |
| struct device_node *node_ctrl; |
| void __iomem *ctrl; |
| const u32 *pval; |
| u32 idx; |
| |
| /* Enable I2C interrupts for mpc5121 */ |
| node_ctrl = of_find_compatible_node(NULL, NULL, |
| "fsl,mpc5121-i2c-ctrl"); |
| if (node_ctrl) { |
| ctrl = of_iomap(node_ctrl, 0); |
| if (ctrl) { |
| /* Interrupt enable bits for i2c-0/1/2: bit 24/26/28 */ |
| pval = of_get_property(node, "reg", NULL); |
| idx = (*pval & 0xff) / 0x20; |
| setbits32(ctrl, 1 << (24 + idx * 2)); |
| iounmap(ctrl); |
| } |
| of_node_put(node_ctrl); |
| } |
| |
| /* The clock setup for the 52xx works also fine for the 512x */ |
| mpc_i2c_setup_52xx(node, i2c, clock, prescaler); |
| } |
| #else /* CONFIG_PPC_MPC512x */ |
| static void __devinit mpc_i2c_setup_512x(struct device_node *node, |
| struct mpc_i2c *i2c, |
| u32 clock, u32 prescaler) |
| { |
| } |
| #endif /* CONFIG_PPC_MPC512x */ |
| |
| #ifdef CONFIG_FSL_SOC |
| static const struct mpc_i2c_divider mpc_i2c_dividers_8xxx[] __devinitconst = { |
| {160, 0x0120}, {192, 0x0121}, {224, 0x0122}, {256, 0x0123}, |
| {288, 0x0100}, {320, 0x0101}, {352, 0x0601}, {384, 0x0102}, |
| {416, 0x0602}, {448, 0x0126}, {480, 0x0103}, {512, 0x0127}, |
| {544, 0x0b03}, {576, 0x0104}, {608, 0x1603}, {640, 0x0105}, |
| {672, 0x2003}, {704, 0x0b05}, {736, 0x2b03}, {768, 0x0106}, |
| {800, 0x3603}, {832, 0x0b06}, {896, 0x012a}, {960, 0x0107}, |
| {1024, 0x012b}, {1088, 0x1607}, {1152, 0x0108}, {1216, 0x2b07}, |
| {1280, 0x0109}, {1408, 0x1609}, {1536, 0x010a}, {1664, 0x160a}, |
| {1792, 0x012e}, {1920, 0x010b}, {2048, 0x012f}, {2176, 0x2b0b}, |
| {2304, 0x010c}, {2560, 0x010d}, {2816, 0x2b0d}, {3072, 0x010e}, |
| {3328, 0x2b0e}, {3584, 0x0132}, {3840, 0x010f}, {4096, 0x0133}, |
| {4608, 0x0110}, {5120, 0x0111}, {6144, 0x0112}, {7168, 0x0136}, |
| {7680, 0x0113}, {8192, 0x0137}, {9216, 0x0114}, {10240, 0x0115}, |
| {12288, 0x0116}, {14336, 0x013a}, {15360, 0x0117}, {16384, 0x013b}, |
| {18432, 0x0118}, {20480, 0x0119}, {24576, 0x011a}, {28672, 0x013e}, |
| {30720, 0x011b}, {32768, 0x013f}, {36864, 0x011c}, {40960, 0x011d}, |
| {49152, 0x011e}, {61440, 0x011f} |
| }; |
| |
| static u32 __devinit mpc_i2c_get_sec_cfg_8xxx(void) |
| { |
| struct device_node *node = NULL; |
| u32 __iomem *reg; |
| u32 val = 0; |
| |
| node = of_find_node_by_name(NULL, "global-utilities"); |
| if (node) { |
| const u32 *prop = of_get_property(node, "reg", NULL); |
| if (prop) { |
| /* |
| * Map and check POR Device Status Register 2 |
| * (PORDEVSR2) at 0xE0014 |
| */ |
| reg = ioremap(get_immrbase() + *prop + 0x14, 0x4); |
| if (!reg) |
| printk(KERN_ERR |
| "Error: couldn't map PORDEVSR2\n"); |
| else |
| val = in_be32(reg) & 0x00000080; /* sec-cfg */ |
| iounmap(reg); |
| } |
| } |
| if (node) |
| of_node_put(node); |
| |
| return val; |
| } |
| |
| static int __devinit mpc_i2c_get_fdr_8xxx(struct device_node *node, u32 clock, |
| u32 prescaler, u32 *real_clk) |
| { |
| const struct mpc_i2c_divider *div = NULL; |
| u32 divider; |
| int i; |
| |
| if (clock == MPC_I2C_CLOCK_LEGACY) { |
| /* see below - default fdr = 0x1031 -> div = 16 * 3072 */ |
| *real_clk = fsl_get_sys_freq() / prescaler / (16 * 3072); |
| return -EINVAL; |
| } |
| |
| /* Determine proper divider value */ |
| if (of_device_is_compatible(node, "fsl,mpc8544-i2c")) |
| prescaler = mpc_i2c_get_sec_cfg_8xxx() ? 3 : 2; |
| if (!prescaler) |
| prescaler = 1; |
| |
| divider = fsl_get_sys_freq() / clock / prescaler; |
| |
| pr_debug("I2C: src_clock=%d clock=%d divider=%d\n", |
| fsl_get_sys_freq(), clock, divider); |
| |
| /* |
| * We want to choose an FDR/DFSR that generates an I2C bus speed that |
| * is equal to or lower than the requested speed. |
| */ |
| for (i = 0; i < ARRAY_SIZE(mpc_i2c_dividers_8xxx); i++) { |
| div = &mpc_i2c_dividers_8xxx[i]; |
| if (div->divider >= divider) |
| break; |
| } |
| |
| *real_clk = fsl_get_sys_freq() / prescaler / div->divider; |
| return div ? (int)div->fdr : -EINVAL; |
| } |
| |
| static void __devinit mpc_i2c_setup_8xxx(struct device_node *node, |
| struct mpc_i2c *i2c, |
| u32 clock, u32 prescaler) |
| { |
| int ret, fdr; |
| |
| if (clock == MPC_I2C_CLOCK_PRESERVE) { |
| dev_dbg(i2c->dev, "using dfsrr %d, fdr %d\n", |
| readb(i2c->base + MPC_I2C_DFSRR), |
| readb(i2c->base + MPC_I2C_FDR)); |
| return; |
| } |
| |
| ret = mpc_i2c_get_fdr_8xxx(node, clock, prescaler, &i2c->real_clk); |
| fdr = (ret >= 0) ? ret : 0x1031; /* backward compatibility */ |
| |
| writeb(fdr & 0xff, i2c->base + MPC_I2C_FDR); |
| writeb((fdr >> 8) & 0xff, i2c->base + MPC_I2C_DFSRR); |
| |
| if (ret >= 0) |
| dev_info(i2c->dev, "clock %d Hz (dfsrr=%d fdr=%d)\n", |
| i2c->real_clk, fdr >> 8, fdr & 0xff); |
| } |
| |
| #else /* !CONFIG_FSL_SOC */ |
| static void __devinit mpc_i2c_setup_8xxx(struct device_node *node, |
| struct mpc_i2c *i2c, |
| u32 clock, u32 prescaler) |
| { |
| } |
| #endif /* CONFIG_FSL_SOC */ |
| |
| static void mpc_i2c_start(struct mpc_i2c *i2c) |
| { |
| /* Clear arbitration */ |
| writeb(0, i2c->base + MPC_I2C_SR); |
| /* Start with MEN */ |
| writeccr(i2c, CCR_MEN); |
| } |
| |
| static void mpc_i2c_stop(struct mpc_i2c *i2c) |
| { |
| writeccr(i2c, CCR_MEN); |
| } |
| |
| static int mpc_write(struct mpc_i2c *i2c, int target, |
| const u8 *data, int length, int restart) |
| { |
| int i, result; |
| unsigned timeout = i2c->adap.timeout; |
| u32 flags = restart ? CCR_RSTA : 0; |
| |
| /* Start as master */ |
| writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA | CCR_MTX | flags); |
| /* Write target byte */ |
| writeb((target << 1), i2c->base + MPC_I2C_DR); |
| |
| result = i2c_wait(i2c, timeout, 1); |
| if (result < 0) |
| return result; |
| |
| for (i = 0; i < length; i++) { |
| /* Write data byte */ |
| writeb(data[i], i2c->base + MPC_I2C_DR); |
| |
| result = i2c_wait(i2c, timeout, 1); |
| if (result < 0) |
| return result; |
| } |
| |
| return 0; |
| } |
| |
| static int mpc_read(struct mpc_i2c *i2c, int target, |
| u8 *data, int length, int restart) |
| { |
| unsigned timeout = i2c->adap.timeout; |
| int i, result; |
| u32 flags = restart ? CCR_RSTA : 0; |
| |
| /* Switch to read - restart */ |
| writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA | CCR_MTX | flags); |
| /* Write target address byte - this time with the read flag set */ |
| writeb((target << 1) | 1, i2c->base + MPC_I2C_DR); |
| |
| result = i2c_wait(i2c, timeout, 1); |
| if (result < 0) |
| return result; |
| |
| if (length) { |
| if (length == 1) |
| writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA | CCR_TXAK); |
| else |
| writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA); |
| /* Dummy read */ |
| readb(i2c->base + MPC_I2C_DR); |
| } |
| |
| for (i = 0; i < length; i++) { |
| result = i2c_wait(i2c, timeout, 0); |
| if (result < 0) |
| return result; |
| |
| /* Generate txack on next to last byte */ |
| if (i == length - 2) |
| writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA | CCR_TXAK); |
| /* Do not generate stop on last byte */ |
| if (i == length - 1) |
| writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA | CCR_MTX); |
| data[i] = readb(i2c->base + MPC_I2C_DR); |
| } |
| |
| return length; |
| } |
| |
| static int mpc_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) |
| { |
| struct i2c_msg *pmsg; |
| int i; |
| int ret = 0; |
| unsigned long orig_jiffies = jiffies; |
| struct mpc_i2c *i2c = i2c_get_adapdata(adap); |
| |
| mpc_i2c_start(i2c); |
| |
| /* Allow bus up to 1s to become not busy */ |
| while (readb(i2c->base + MPC_I2C_SR) & CSR_MBB) { |
| if (signal_pending(current)) { |
| dev_dbg(i2c->dev, "Interrupted\n"); |
| writeccr(i2c, 0); |
| return -EINTR; |
| } |
| if (time_after(jiffies, orig_jiffies + HZ)) { |
| u8 status = readb(i2c->base + MPC_I2C_SR); |
| |
| dev_dbg(i2c->dev, "timeout\n"); |
| if ((status & (CSR_MCF | CSR_MBB | CSR_RXAK)) != 0) { |
| writeb(status & ~CSR_MAL, |
| i2c->base + MPC_I2C_SR); |
| mpc_i2c_fixup(i2c); |
| } |
| return -EIO; |
| } |
| schedule(); |
| } |
| |
| for (i = 0; ret >= 0 && i < num; i++) { |
| pmsg = &msgs[i]; |
| dev_dbg(i2c->dev, |
| "Doing %s %d bytes to 0x%02x - %d of %d messages\n", |
| pmsg->flags & I2C_M_RD ? "read" : "write", |
| pmsg->len, pmsg->addr, i + 1, num); |
| if (pmsg->flags & I2C_M_RD) |
| ret = |
| mpc_read(i2c, pmsg->addr, pmsg->buf, pmsg->len, i); |
| else |
| ret = |
| mpc_write(i2c, pmsg->addr, pmsg->buf, pmsg->len, i); |
| } |
| mpc_i2c_stop(i2c); |
| return (ret < 0) ? ret : num; |
| } |
| |
| static u32 mpc_functionality(struct i2c_adapter *adap) |
| { |
| return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; |
| } |
| |
| static const struct i2c_algorithm mpc_algo = { |
| .master_xfer = mpc_xfer, |
| .functionality = mpc_functionality, |
| }; |
| |
| static struct i2c_adapter mpc_ops = { |
| .owner = THIS_MODULE, |
| .name = "MPC adapter", |
| .algo = &mpc_algo, |
| .timeout = HZ, |
| }; |
| |
| static int __devinit fsl_i2c_probe(struct platform_device *op) |
| { |
| struct mpc_i2c *i2c; |
| const u32 *prop; |
| u32 clock = MPC_I2C_CLOCK_LEGACY; |
| int result = 0; |
| int plen; |
| |
| if (!op->dev.of_match) |
| return -EINVAL; |
| |
| i2c = kzalloc(sizeof(*i2c), GFP_KERNEL); |
| if (!i2c) |
| return -ENOMEM; |
| |
| i2c->dev = &op->dev; /* for debug and error output */ |
| |
| init_waitqueue_head(&i2c->queue); |
| |
| i2c->base = of_iomap(op->dev.of_node, 0); |
| if (!i2c->base) { |
| dev_err(i2c->dev, "failed to map controller\n"); |
| result = -ENOMEM; |
| goto fail_map; |
| } |
| |
| i2c->irq = irq_of_parse_and_map(op->dev.of_node, 0); |
| if (i2c->irq) { /* no i2c->irq implies polling */ |
| result = request_irq(i2c->irq, mpc_i2c_isr, |
| IRQF_SHARED, "i2c-mpc", i2c); |
| if (result < 0) { |
| dev_err(i2c->dev, "failed to attach interrupt\n"); |
| goto fail_request; |
| } |
| } |
| |
| if (of_get_property(op->dev.of_node, "fsl,preserve-clocking", NULL)) { |
| clock = MPC_I2C_CLOCK_PRESERVE; |
| } else { |
| prop = of_get_property(op->dev.of_node, "clock-frequency", |
| &plen); |
| if (prop && plen == sizeof(u32)) |
| clock = *prop; |
| } |
| |
| if (op->dev.of_match->data) { |
| struct mpc_i2c_data *data = op->dev.of_match->data; |
| data->setup(op->dev.of_node, i2c, clock, data->prescaler); |
| } else { |
| /* Backwards compatibility */ |
| if (of_get_property(op->dev.of_node, "dfsrr", NULL)) |
| mpc_i2c_setup_8xxx(op->dev.of_node, i2c, clock, 0); |
| } |
| |
| prop = of_get_property(op->dev.of_node, "fsl,timeout", &plen); |
| if (prop && plen == sizeof(u32)) { |
| mpc_ops.timeout = *prop * HZ / 1000000; |
| if (mpc_ops.timeout < 5) |
| mpc_ops.timeout = 5; |
| } |
| dev_info(i2c->dev, "timeout %u us\n", mpc_ops.timeout * 1000000 / HZ); |
| |
| dev_set_drvdata(&op->dev, i2c); |
| |
| i2c->adap = mpc_ops; |
| i2c_set_adapdata(&i2c->adap, i2c); |
| i2c->adap.dev.parent = &op->dev; |
| i2c->adap.dev.of_node = of_node_get(op->dev.of_node); |
| |
| result = i2c_add_adapter(&i2c->adap); |
| if (result < 0) { |
| dev_err(i2c->dev, "failed to add adapter\n"); |
| goto fail_add; |
| } |
| of_i2c_register_devices(&i2c->adap); |
| |
| return result; |
| |
| fail_add: |
| dev_set_drvdata(&op->dev, NULL); |
| free_irq(i2c->irq, i2c); |
| fail_request: |
| irq_dispose_mapping(i2c->irq); |
| iounmap(i2c->base); |
| fail_map: |
| kfree(i2c); |
| return result; |
| }; |
| |
| static int __devexit fsl_i2c_remove(struct platform_device *op) |
| { |
| struct mpc_i2c *i2c = dev_get_drvdata(&op->dev); |
| |
| i2c_del_adapter(&i2c->adap); |
| dev_set_drvdata(&op->dev, NULL); |
| |
| if (i2c->irq) |
| free_irq(i2c->irq, i2c); |
| |
| irq_dispose_mapping(i2c->irq); |
| iounmap(i2c->base); |
| kfree(i2c); |
| return 0; |
| }; |
| |
| static struct mpc_i2c_data mpc_i2c_data_512x __devinitdata = { |
| .setup = mpc_i2c_setup_512x, |
| }; |
| |
| static struct mpc_i2c_data mpc_i2c_data_52xx __devinitdata = { |
| .setup = mpc_i2c_setup_52xx, |
| }; |
| |
| static struct mpc_i2c_data mpc_i2c_data_8313 __devinitdata = { |
| .setup = mpc_i2c_setup_8xxx, |
| }; |
| |
| static struct mpc_i2c_data mpc_i2c_data_8543 __devinitdata = { |
| .setup = mpc_i2c_setup_8xxx, |
| .prescaler = 2, |
| }; |
| |
| static struct mpc_i2c_data mpc_i2c_data_8544 __devinitdata = { |
| .setup = mpc_i2c_setup_8xxx, |
| .prescaler = 3, |
| }; |
| |
| static const struct of_device_id mpc_i2c_of_match[] = { |
| {.compatible = "mpc5200-i2c", .data = &mpc_i2c_data_52xx, }, |
| {.compatible = "fsl,mpc5200b-i2c", .data = &mpc_i2c_data_52xx, }, |
| {.compatible = "fsl,mpc5200-i2c", .data = &mpc_i2c_data_52xx, }, |
| {.compatible = "fsl,mpc5121-i2c", .data = &mpc_i2c_data_512x, }, |
| {.compatible = "fsl,mpc8313-i2c", .data = &mpc_i2c_data_8313, }, |
| {.compatible = "fsl,mpc8543-i2c", .data = &mpc_i2c_data_8543, }, |
| {.compatible = "fsl,mpc8544-i2c", .data = &mpc_i2c_data_8544, }, |
| /* Backward compatibility */ |
| {.compatible = "fsl-i2c", }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, mpc_i2c_of_match); |
| |
| /* Structure for a device driver */ |
| static struct platform_driver mpc_i2c_driver = { |
| .probe = fsl_i2c_probe, |
| .remove = __devexit_p(fsl_i2c_remove), |
| .driver = { |
| .owner = THIS_MODULE, |
| .name = DRV_NAME, |
| .of_match_table = mpc_i2c_of_match, |
| }, |
| }; |
| |
| static int __init fsl_i2c_init(void) |
| { |
| return platform_driver_register(&mpc_i2c_driver); |
| } |
| |
| static void __exit fsl_i2c_exit(void) |
| { |
| platform_driver_unregister(&mpc_i2c_driver); |
| } |
| |
| module_init(fsl_i2c_init); |
| module_exit(fsl_i2c_exit); |
| |
| MODULE_AUTHOR("Adrian Cox <adrian@humboldt.co.uk>"); |
| MODULE_DESCRIPTION("I2C-Bus adapter for MPC107 bridge and " |
| "MPC824x/83xx/85xx/86xx/512x/52xx processors"); |
| MODULE_LICENSE("GPL"); |