| /* |
| * (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de> |
| * |
| * Licensed under the terms of the GNU GPL License version 2. |
| * |
| * BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous* |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/cpufreq.h> |
| #include <linux/timex.h> |
| |
| #include <asm/msr.h> |
| #include <asm/processor.h> |
| |
| #define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \ |
| "longrun", msg) |
| |
| static struct cpufreq_driver longrun_driver; |
| |
| /** |
| * longrun_{low,high}_freq is needed for the conversion of cpufreq kHz |
| * values into per cent values. In TMTA microcode, the following is valid: |
| * performance_pctg = (current_freq - low_freq)/(high_freq - low_freq) |
| */ |
| static unsigned int longrun_low_freq, longrun_high_freq; |
| |
| |
| /** |
| * longrun_get_policy - get the current LongRun policy |
| * @policy: struct cpufreq_policy where current policy is written into |
| * |
| * Reads the current LongRun policy by access to MSR_TMTA_LONGRUN_FLAGS |
| * and MSR_TMTA_LONGRUN_CTRL |
| */ |
| static void __cpuinit longrun_get_policy(struct cpufreq_policy *policy) |
| { |
| u32 msr_lo, msr_hi; |
| |
| rdmsr(MSR_TMTA_LONGRUN_FLAGS, msr_lo, msr_hi); |
| dprintk("longrun flags are %x - %x\n", msr_lo, msr_hi); |
| if (msr_lo & 0x01) |
| policy->policy = CPUFREQ_POLICY_PERFORMANCE; |
| else |
| policy->policy = CPUFREQ_POLICY_POWERSAVE; |
| |
| rdmsr(MSR_TMTA_LONGRUN_CTRL, msr_lo, msr_hi); |
| dprintk("longrun ctrl is %x - %x\n", msr_lo, msr_hi); |
| msr_lo &= 0x0000007F; |
| msr_hi &= 0x0000007F; |
| |
| if (longrun_high_freq <= longrun_low_freq) { |
| /* Assume degenerate Longrun table */ |
| policy->min = policy->max = longrun_high_freq; |
| } else { |
| policy->min = longrun_low_freq + msr_lo * |
| ((longrun_high_freq - longrun_low_freq) / 100); |
| policy->max = longrun_low_freq + msr_hi * |
| ((longrun_high_freq - longrun_low_freq) / 100); |
| } |
| policy->cpu = 0; |
| } |
| |
| |
| /** |
| * longrun_set_policy - sets a new CPUFreq policy |
| * @policy: new policy |
| * |
| * Sets a new CPUFreq policy on LongRun-capable processors. This function |
| * has to be called with cpufreq_driver locked. |
| */ |
| static int longrun_set_policy(struct cpufreq_policy *policy) |
| { |
| u32 msr_lo, msr_hi; |
| u32 pctg_lo, pctg_hi; |
| |
| if (!policy) |
| return -EINVAL; |
| |
| if (longrun_high_freq <= longrun_low_freq) { |
| /* Assume degenerate Longrun table */ |
| pctg_lo = pctg_hi = 100; |
| } else { |
| pctg_lo = (policy->min - longrun_low_freq) / |
| ((longrun_high_freq - longrun_low_freq) / 100); |
| pctg_hi = (policy->max - longrun_low_freq) / |
| ((longrun_high_freq - longrun_low_freq) / 100); |
| } |
| |
| if (pctg_hi > 100) |
| pctg_hi = 100; |
| if (pctg_lo > pctg_hi) |
| pctg_lo = pctg_hi; |
| |
| /* performance or economy mode */ |
| rdmsr(MSR_TMTA_LONGRUN_FLAGS, msr_lo, msr_hi); |
| msr_lo &= 0xFFFFFFFE; |
| switch (policy->policy) { |
| case CPUFREQ_POLICY_PERFORMANCE: |
| msr_lo |= 0x00000001; |
| break; |
| case CPUFREQ_POLICY_POWERSAVE: |
| break; |
| } |
| wrmsr(MSR_TMTA_LONGRUN_FLAGS, msr_lo, msr_hi); |
| |
| /* lower and upper boundary */ |
| rdmsr(MSR_TMTA_LONGRUN_CTRL, msr_lo, msr_hi); |
| msr_lo &= 0xFFFFFF80; |
| msr_hi &= 0xFFFFFF80; |
| msr_lo |= pctg_lo; |
| msr_hi |= pctg_hi; |
| wrmsr(MSR_TMTA_LONGRUN_CTRL, msr_lo, msr_hi); |
| |
| return 0; |
| } |
| |
| |
| /** |
| * longrun_verify_poliy - verifies a new CPUFreq policy |
| * @policy: the policy to verify |
| * |
| * Validates a new CPUFreq policy. This function has to be called with |
| * cpufreq_driver locked. |
| */ |
| static int longrun_verify_policy(struct cpufreq_policy *policy) |
| { |
| if (!policy) |
| return -EINVAL; |
| |
| policy->cpu = 0; |
| cpufreq_verify_within_limits(policy, |
| policy->cpuinfo.min_freq, |
| policy->cpuinfo.max_freq); |
| |
| if ((policy->policy != CPUFREQ_POLICY_POWERSAVE) && |
| (policy->policy != CPUFREQ_POLICY_PERFORMANCE)) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| static unsigned int longrun_get(unsigned int cpu) |
| { |
| u32 eax, ebx, ecx, edx; |
| |
| if (cpu) |
| return 0; |
| |
| cpuid(0x80860007, &eax, &ebx, &ecx, &edx); |
| dprintk("cpuid eax is %u\n", eax); |
| |
| return eax * 1000; |
| } |
| |
| /** |
| * longrun_determine_freqs - determines the lowest and highest possible core frequency |
| * @low_freq: an int to put the lowest frequency into |
| * @high_freq: an int to put the highest frequency into |
| * |
| * Determines the lowest and highest possible core frequencies on this CPU. |
| * This is necessary to calculate the performance percentage according to |
| * TMTA rules: |
| * performance_pctg = (target_freq - low_freq)/(high_freq - low_freq) |
| */ |
| static int __cpuinit longrun_determine_freqs(unsigned int *low_freq, |
| unsigned int *high_freq) |
| { |
| u32 msr_lo, msr_hi; |
| u32 save_lo, save_hi; |
| u32 eax, ebx, ecx, edx; |
| u32 try_hi; |
| struct cpuinfo_x86 *c = &cpu_data(0); |
| |
| if (!low_freq || !high_freq) |
| return -EINVAL; |
| |
| if (cpu_has(c, X86_FEATURE_LRTI)) { |
| /* if the LongRun Table Interface is present, the |
| * detection is a bit easier: |
| * For minimum frequency, read out the maximum |
| * level (msr_hi), write that into "currently |
| * selected level", and read out the frequency. |
| * For maximum frequency, read out level zero. |
| */ |
| /* minimum */ |
| rdmsr(MSR_TMTA_LRTI_READOUT, msr_lo, msr_hi); |
| wrmsr(MSR_TMTA_LRTI_READOUT, msr_hi, msr_hi); |
| rdmsr(MSR_TMTA_LRTI_VOLT_MHZ, msr_lo, msr_hi); |
| *low_freq = msr_lo * 1000; /* to kHz */ |
| |
| /* maximum */ |
| wrmsr(MSR_TMTA_LRTI_READOUT, 0, msr_hi); |
| rdmsr(MSR_TMTA_LRTI_VOLT_MHZ, msr_lo, msr_hi); |
| *high_freq = msr_lo * 1000; /* to kHz */ |
| |
| dprintk("longrun table interface told %u - %u kHz\n", |
| *low_freq, *high_freq); |
| |
| if (*low_freq > *high_freq) |
| *low_freq = *high_freq; |
| return 0; |
| } |
| |
| /* set the upper border to the value determined during TSC init */ |
| *high_freq = (cpu_khz / 1000); |
| *high_freq = *high_freq * 1000; |
| dprintk("high frequency is %u kHz\n", *high_freq); |
| |
| /* get current borders */ |
| rdmsr(MSR_TMTA_LONGRUN_CTRL, msr_lo, msr_hi); |
| save_lo = msr_lo & 0x0000007F; |
| save_hi = msr_hi & 0x0000007F; |
| |
| /* if current perf_pctg is larger than 90%, we need to decrease the |
| * upper limit to make the calculation more accurate. |
| */ |
| cpuid(0x80860007, &eax, &ebx, &ecx, &edx); |
| /* try decreasing in 10% steps, some processors react only |
| * on some barrier values */ |
| for (try_hi = 80; try_hi > 0 && ecx > 90; try_hi -= 10) { |
| /* set to 0 to try_hi perf_pctg */ |
| msr_lo &= 0xFFFFFF80; |
| msr_hi &= 0xFFFFFF80; |
| msr_hi |= try_hi; |
| wrmsr(MSR_TMTA_LONGRUN_CTRL, msr_lo, msr_hi); |
| |
| /* read out current core MHz and current perf_pctg */ |
| cpuid(0x80860007, &eax, &ebx, &ecx, &edx); |
| |
| /* restore values */ |
| wrmsr(MSR_TMTA_LONGRUN_CTRL, save_lo, save_hi); |
| } |
| dprintk("percentage is %u %%, freq is %u MHz\n", ecx, eax); |
| |
| /* performance_pctg = (current_freq - low_freq)/(high_freq - low_freq) |
| * eqals |
| * low_freq * (1 - perf_pctg) = (cur_freq - high_freq * perf_pctg) |
| * |
| * high_freq * perf_pctg is stored tempoarily into "ebx". |
| */ |
| ebx = (((cpu_khz / 1000) * ecx) / 100); /* to MHz */ |
| |
| if ((ecx > 95) || (ecx == 0) || (eax < ebx)) |
| return -EIO; |
| |
| edx = ((eax - ebx) * 100) / (100 - ecx); |
| *low_freq = edx * 1000; /* back to kHz */ |
| |
| dprintk("low frequency is %u kHz\n", *low_freq); |
| |
| if (*low_freq > *high_freq) |
| *low_freq = *high_freq; |
| |
| return 0; |
| } |
| |
| |
| static int __cpuinit longrun_cpu_init(struct cpufreq_policy *policy) |
| { |
| int result = 0; |
| |
| /* capability check */ |
| if (policy->cpu != 0) |
| return -ENODEV; |
| |
| /* detect low and high frequency */ |
| result = longrun_determine_freqs(&longrun_low_freq, &longrun_high_freq); |
| if (result) |
| return result; |
| |
| /* cpuinfo and default policy values */ |
| policy->cpuinfo.min_freq = longrun_low_freq; |
| policy->cpuinfo.max_freq = longrun_high_freq; |
| policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; |
| longrun_get_policy(policy); |
| |
| return 0; |
| } |
| |
| |
| static struct cpufreq_driver longrun_driver = { |
| .flags = CPUFREQ_CONST_LOOPS, |
| .verify = longrun_verify_policy, |
| .setpolicy = longrun_set_policy, |
| .get = longrun_get, |
| .init = longrun_cpu_init, |
| .name = "longrun", |
| .owner = THIS_MODULE, |
| }; |
| |
| |
| /** |
| * longrun_init - initializes the Transmeta Crusoe LongRun CPUFreq driver |
| * |
| * Initializes the LongRun support. |
| */ |
| static int __init longrun_init(void) |
| { |
| struct cpuinfo_x86 *c = &cpu_data(0); |
| |
| if (c->x86_vendor != X86_VENDOR_TRANSMETA || |
| !cpu_has(c, X86_FEATURE_LONGRUN)) |
| return -ENODEV; |
| |
| return cpufreq_register_driver(&longrun_driver); |
| } |
| |
| |
| /** |
| * longrun_exit - unregisters LongRun support |
| */ |
| static void __exit longrun_exit(void) |
| { |
| cpufreq_unregister_driver(&longrun_driver); |
| } |
| |
| |
| MODULE_AUTHOR("Dominik Brodowski <linux@brodo.de>"); |
| MODULE_DESCRIPTION("LongRun driver for Transmeta Crusoe and " |
| "Efficeon processors."); |
| MODULE_LICENSE("GPL"); |
| |
| module_init(longrun_init); |
| module_exit(longrun_exit); |