| /* |
| * NOOP APIC driver. |
| * |
| * Does almost nothing and should be substituted by a real apic driver via |
| * probe routine. |
| * |
| * Though in case if apic is disabled (for some reason) we try |
| * to not uglify the caller's code and allow to call (some) apic routines |
| * like self-ipi, etc... |
| */ |
| |
| #include <linux/threads.h> |
| #include <linux/cpumask.h> |
| #include <linux/module.h> |
| #include <linux/string.h> |
| #include <linux/kernel.h> |
| #include <linux/ctype.h> |
| #include <linux/init.h> |
| #include <linux/errno.h> |
| #include <asm/fixmap.h> |
| #include <asm/mpspec.h> |
| #include <asm/apicdef.h> |
| #include <asm/apic.h> |
| #include <asm/setup.h> |
| |
| #include <linux/smp.h> |
| #include <asm/ipi.h> |
| |
| #include <linux/interrupt.h> |
| #include <asm/acpi.h> |
| #include <asm/e820.h> |
| |
| static void noop_init_apic_ldr(void) { } |
| static void noop_send_IPI_mask(const struct cpumask *cpumask, int vector) { } |
| static void noop_send_IPI_mask_allbutself(const struct cpumask *cpumask, int vector) { } |
| static void noop_send_IPI_allbutself(int vector) { } |
| static void noop_send_IPI_all(int vector) { } |
| static void noop_send_IPI_self(int vector) { } |
| static void noop_apic_wait_icr_idle(void) { } |
| static void noop_apic_icr_write(u32 low, u32 id) { } |
| |
| static int noop_wakeup_secondary_cpu(int apicid, unsigned long start_eip) |
| { |
| return -1; |
| } |
| |
| static u32 noop_safe_apic_wait_icr_idle(void) |
| { |
| return 0; |
| } |
| |
| static u64 noop_apic_icr_read(void) |
| { |
| return 0; |
| } |
| |
| static int noop_phys_pkg_id(int cpuid_apic, int index_msb) |
| { |
| return 0; |
| } |
| |
| static unsigned int noop_get_apic_id(unsigned long x) |
| { |
| return 0; |
| } |
| |
| static int noop_probe(void) |
| { |
| /* |
| * NOOP apic should not ever be |
| * enabled via probe routine |
| */ |
| return 0; |
| } |
| |
| static int noop_apic_id_registered(void) |
| { |
| /* |
| * if we would be really "pedantic" |
| * we should pass read_apic_id() here |
| * but since NOOP suppose APIC ID = 0 |
| * lets save a few cycles |
| */ |
| return physid_isset(0, phys_cpu_present_map); |
| } |
| |
| static const struct cpumask *noop_target_cpus(void) |
| { |
| /* only BSP here */ |
| return cpumask_of(0); |
| } |
| |
| static unsigned long noop_check_apicid_used(physid_mask_t *map, int apicid) |
| { |
| return physid_isset(apicid, *map); |
| } |
| |
| static unsigned long noop_check_apicid_present(int bit) |
| { |
| return physid_isset(bit, phys_cpu_present_map); |
| } |
| |
| static void noop_vector_allocation_domain(int cpu, struct cpumask *retmask) |
| { |
| if (cpu != 0) |
| pr_warning("APIC: Vector allocated for non-BSP cpu\n"); |
| cpumask_clear(retmask); |
| cpumask_set_cpu(cpu, retmask); |
| } |
| |
| static u32 noop_apic_read(u32 reg) |
| { |
| WARN_ON_ONCE((cpu_has_apic && !disable_apic)); |
| return 0; |
| } |
| |
| static void noop_apic_write(u32 reg, u32 v) |
| { |
| WARN_ON_ONCE(cpu_has_apic && !disable_apic); |
| } |
| |
| #ifdef CONFIG_X86_32 |
| static int noop_x86_32_numa_cpu_node(int cpu) |
| { |
| /* we're always on node 0 */ |
| return 0; |
| } |
| #endif |
| |
| struct apic apic_noop = { |
| .name = "noop", |
| .probe = noop_probe, |
| .acpi_madt_oem_check = NULL, |
| |
| .apic_id_registered = noop_apic_id_registered, |
| |
| .irq_delivery_mode = dest_LowestPrio, |
| /* logical delivery broadcast to all CPUs: */ |
| .irq_dest_mode = 1, |
| |
| .target_cpus = noop_target_cpus, |
| .disable_esr = 0, |
| .dest_logical = APIC_DEST_LOGICAL, |
| .check_apicid_used = noop_check_apicid_used, |
| .check_apicid_present = noop_check_apicid_present, |
| |
| .vector_allocation_domain = noop_vector_allocation_domain, |
| .init_apic_ldr = noop_init_apic_ldr, |
| |
| .ioapic_phys_id_map = default_ioapic_phys_id_map, |
| .setup_apic_routing = NULL, |
| .multi_timer_check = NULL, |
| |
| .cpu_present_to_apicid = default_cpu_present_to_apicid, |
| .apicid_to_cpu_present = physid_set_mask_of_physid, |
| |
| .setup_portio_remap = NULL, |
| .check_phys_apicid_present = default_check_phys_apicid_present, |
| .enable_apic_mode = NULL, |
| |
| .phys_pkg_id = noop_phys_pkg_id, |
| |
| .mps_oem_check = NULL, |
| |
| .get_apic_id = noop_get_apic_id, |
| .set_apic_id = NULL, |
| .apic_id_mask = 0x0F << 24, |
| |
| .cpu_mask_to_apicid = default_cpu_mask_to_apicid, |
| .cpu_mask_to_apicid_and = default_cpu_mask_to_apicid_and, |
| |
| .send_IPI_mask = noop_send_IPI_mask, |
| .send_IPI_mask_allbutself = noop_send_IPI_mask_allbutself, |
| .send_IPI_allbutself = noop_send_IPI_allbutself, |
| .send_IPI_all = noop_send_IPI_all, |
| .send_IPI_self = noop_send_IPI_self, |
| |
| .wakeup_secondary_cpu = noop_wakeup_secondary_cpu, |
| |
| /* should be safe */ |
| .trampoline_phys_low = DEFAULT_TRAMPOLINE_PHYS_LOW, |
| .trampoline_phys_high = DEFAULT_TRAMPOLINE_PHYS_HIGH, |
| |
| .wait_for_init_deassert = NULL, |
| |
| .smp_callin_clear_local_apic = NULL, |
| .inquire_remote_apic = NULL, |
| |
| .read = noop_apic_read, |
| .write = noop_apic_write, |
| .icr_read = noop_apic_icr_read, |
| .icr_write = noop_apic_icr_write, |
| .wait_icr_idle = noop_apic_wait_icr_idle, |
| .safe_wait_icr_idle = noop_safe_apic_wait_icr_idle, |
| |
| #ifdef CONFIG_X86_32 |
| .x86_32_early_logical_apicid = noop_x86_32_early_logical_apicid, |
| .x86_32_numa_cpu_node = noop_x86_32_numa_cpu_node, |
| #endif |
| }; |