| /* |
| * Copyright(c) 2005 - 2006 Attansic Corporation. All rights reserved. |
| * Copyright(c) 2006 - 2007 Chris Snook <csnook@redhat.com> |
| * Copyright(c) 2006 - 2008 Jay Cliburn <jcliburn@gmail.com> |
| * |
| * Derived from Intel e1000 driver |
| * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the Free |
| * Software Foundation; either version 2 of the License, or (at your option) |
| * any later version. |
| * |
| * This program is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * You should have received a copy of the GNU General Public License along with |
| * this program; if not, write to the Free Software Foundation, Inc., 59 |
| * Temple Place - Suite 330, Boston, MA 02111-1307, USA. |
| * |
| * The full GNU General Public License is included in this distribution in the |
| * file called COPYING. |
| * |
| * Contact Information: |
| * Xiong Huang <xiong.huang@atheros.com> |
| * Jie Yang <jie.yang@atheros.com> |
| * Chris Snook <csnook@redhat.com> |
| * Jay Cliburn <jcliburn@gmail.com> |
| * |
| * This version is adapted from the Attansic reference driver. |
| * |
| * TODO: |
| * Add more ethtool functions. |
| * Fix abstruse irq enable/disable condition described here: |
| * http://marc.theaimsgroup.com/?l=linux-netdev&m=116398508500553&w=2 |
| * |
| * NEEDS TESTING: |
| * VLAN |
| * multicast |
| * promiscuous mode |
| * interrupt coalescing |
| * SMP torture testing |
| */ |
| |
| #include <linux/atomic.h> |
| #include <asm/byteorder.h> |
| |
| #include <linux/compiler.h> |
| #include <linux/crc32.h> |
| #include <linux/delay.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/etherdevice.h> |
| #include <linux/hardirq.h> |
| #include <linux/if_ether.h> |
| #include <linux/if_vlan.h> |
| #include <linux/in.h> |
| #include <linux/interrupt.h> |
| #include <linux/ip.h> |
| #include <linux/irqflags.h> |
| #include <linux/irqreturn.h> |
| #include <linux/jiffies.h> |
| #include <linux/mii.h> |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/net.h> |
| #include <linux/netdevice.h> |
| #include <linux/pci.h> |
| #include <linux/pci_ids.h> |
| #include <linux/pm.h> |
| #include <linux/skbuff.h> |
| #include <linux/slab.h> |
| #include <linux/spinlock.h> |
| #include <linux/string.h> |
| #include <linux/tcp.h> |
| #include <linux/timer.h> |
| #include <linux/types.h> |
| #include <linux/workqueue.h> |
| |
| #include <net/checksum.h> |
| |
| #include "atl1.h" |
| |
| #define ATLX_DRIVER_VERSION "2.1.3" |
| MODULE_AUTHOR("Xiong Huang <xiong.huang@atheros.com>, " |
| "Chris Snook <csnook@redhat.com>, " |
| "Jay Cliburn <jcliburn@gmail.com>"); |
| MODULE_LICENSE("GPL"); |
| MODULE_VERSION(ATLX_DRIVER_VERSION); |
| |
| /* Temporary hack for merging atl1 and atl2 */ |
| #include "atlx.c" |
| |
| static const struct ethtool_ops atl1_ethtool_ops; |
| |
| /* |
| * This is the only thing that needs to be changed to adjust the |
| * maximum number of ports that the driver can manage. |
| */ |
| #define ATL1_MAX_NIC 4 |
| |
| #define OPTION_UNSET -1 |
| #define OPTION_DISABLED 0 |
| #define OPTION_ENABLED 1 |
| |
| #define ATL1_PARAM_INIT { [0 ... ATL1_MAX_NIC] = OPTION_UNSET } |
| |
| /* |
| * Interrupt Moderate Timer in units of 2 us |
| * |
| * Valid Range: 10-65535 |
| * |
| * Default Value: 100 (200us) |
| */ |
| static int __devinitdata int_mod_timer[ATL1_MAX_NIC+1] = ATL1_PARAM_INIT; |
| static unsigned int num_int_mod_timer; |
| module_param_array_named(int_mod_timer, int_mod_timer, int, |
| &num_int_mod_timer, 0); |
| MODULE_PARM_DESC(int_mod_timer, "Interrupt moderator timer"); |
| |
| #define DEFAULT_INT_MOD_CNT 100 /* 200us */ |
| #define MAX_INT_MOD_CNT 65000 |
| #define MIN_INT_MOD_CNT 50 |
| |
| struct atl1_option { |
| enum { enable_option, range_option, list_option } type; |
| char *name; |
| char *err; |
| int def; |
| union { |
| struct { /* range_option info */ |
| int min; |
| int max; |
| } r; |
| struct { /* list_option info */ |
| int nr; |
| struct atl1_opt_list { |
| int i; |
| char *str; |
| } *p; |
| } l; |
| } arg; |
| }; |
| |
| static int __devinit atl1_validate_option(int *value, struct atl1_option *opt, |
| struct pci_dev *pdev) |
| { |
| if (*value == OPTION_UNSET) { |
| *value = opt->def; |
| return 0; |
| } |
| |
| switch (opt->type) { |
| case enable_option: |
| switch (*value) { |
| case OPTION_ENABLED: |
| dev_info(&pdev->dev, "%s enabled\n", opt->name); |
| return 0; |
| case OPTION_DISABLED: |
| dev_info(&pdev->dev, "%s disabled\n", opt->name); |
| return 0; |
| } |
| break; |
| case range_option: |
| if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) { |
| dev_info(&pdev->dev, "%s set to %i\n", opt->name, |
| *value); |
| return 0; |
| } |
| break; |
| case list_option:{ |
| int i; |
| struct atl1_opt_list *ent; |
| |
| for (i = 0; i < opt->arg.l.nr; i++) { |
| ent = &opt->arg.l.p[i]; |
| if (*value == ent->i) { |
| if (ent->str[0] != '\0') |
| dev_info(&pdev->dev, "%s\n", |
| ent->str); |
| return 0; |
| } |
| } |
| } |
| break; |
| |
| default: |
| break; |
| } |
| |
| dev_info(&pdev->dev, "invalid %s specified (%i) %s\n", |
| opt->name, *value, opt->err); |
| *value = opt->def; |
| return -1; |
| } |
| |
| /** |
| * atl1_check_options - Range Checking for Command Line Parameters |
| * @adapter: board private structure |
| * |
| * This routine checks all command line parameters for valid user |
| * input. If an invalid value is given, or if no user specified |
| * value exists, a default value is used. The final value is stored |
| * in a variable in the adapter structure. |
| */ |
| static void __devinit atl1_check_options(struct atl1_adapter *adapter) |
| { |
| struct pci_dev *pdev = adapter->pdev; |
| int bd = adapter->bd_number; |
| if (bd >= ATL1_MAX_NIC) { |
| dev_notice(&pdev->dev, "no configuration for board#%i\n", bd); |
| dev_notice(&pdev->dev, "using defaults for all values\n"); |
| } |
| { /* Interrupt Moderate Timer */ |
| struct atl1_option opt = { |
| .type = range_option, |
| .name = "Interrupt Moderator Timer", |
| .err = "using default of " |
| __MODULE_STRING(DEFAULT_INT_MOD_CNT), |
| .def = DEFAULT_INT_MOD_CNT, |
| .arg = {.r = {.min = MIN_INT_MOD_CNT, |
| .max = MAX_INT_MOD_CNT} } |
| }; |
| int val; |
| if (num_int_mod_timer > bd) { |
| val = int_mod_timer[bd]; |
| atl1_validate_option(&val, &opt, pdev); |
| adapter->imt = (u16) val; |
| } else |
| adapter->imt = (u16) (opt.def); |
| } |
| } |
| |
| /* |
| * atl1_pci_tbl - PCI Device ID Table |
| */ |
| static DEFINE_PCI_DEVICE_TABLE(atl1_pci_tbl) = { |
| {PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, PCI_DEVICE_ID_ATTANSIC_L1)}, |
| /* required last entry */ |
| {0,} |
| }; |
| MODULE_DEVICE_TABLE(pci, atl1_pci_tbl); |
| |
| static const u32 atl1_default_msg = NETIF_MSG_DRV | NETIF_MSG_PROBE | |
| NETIF_MSG_LINK | NETIF_MSG_TIMER | NETIF_MSG_IFDOWN | NETIF_MSG_IFUP; |
| |
| static int debug = -1; |
| module_param(debug, int, 0); |
| MODULE_PARM_DESC(debug, "Message level (0=none,...,16=all)"); |
| |
| /* |
| * Reset the transmit and receive units; mask and clear all interrupts. |
| * hw - Struct containing variables accessed by shared code |
| * return : 0 or idle status (if error) |
| */ |
| static s32 atl1_reset_hw(struct atl1_hw *hw) |
| { |
| struct pci_dev *pdev = hw->back->pdev; |
| struct atl1_adapter *adapter = hw->back; |
| u32 icr; |
| int i; |
| |
| /* |
| * Clear Interrupt mask to stop board from generating |
| * interrupts & Clear any pending interrupt events |
| */ |
| /* |
| * atlx_irq_disable(adapter); |
| * iowrite32(0xffffffff, hw->hw_addr + REG_ISR); |
| */ |
| |
| /* |
| * Issue Soft Reset to the MAC. This will reset the chip's |
| * transmit, receive, DMA. It will not effect |
| * the current PCI configuration. The global reset bit is self- |
| * clearing, and should clear within a microsecond. |
| */ |
| iowrite32(MASTER_CTRL_SOFT_RST, hw->hw_addr + REG_MASTER_CTRL); |
| ioread32(hw->hw_addr + REG_MASTER_CTRL); |
| |
| iowrite16(1, hw->hw_addr + REG_PHY_ENABLE); |
| ioread16(hw->hw_addr + REG_PHY_ENABLE); |
| |
| /* delay about 1ms */ |
| msleep(1); |
| |
| /* Wait at least 10ms for All module to be Idle */ |
| for (i = 0; i < 10; i++) { |
| icr = ioread32(hw->hw_addr + REG_IDLE_STATUS); |
| if (!icr) |
| break; |
| /* delay 1 ms */ |
| msleep(1); |
| /* FIXME: still the right way to do this? */ |
| cpu_relax(); |
| } |
| |
| if (icr) { |
| if (netif_msg_hw(adapter)) |
| dev_dbg(&pdev->dev, "ICR = 0x%x\n", icr); |
| return icr; |
| } |
| |
| return 0; |
| } |
| |
| /* function about EEPROM |
| * |
| * check_eeprom_exist |
| * return 0 if eeprom exist |
| */ |
| static int atl1_check_eeprom_exist(struct atl1_hw *hw) |
| { |
| u32 value; |
| value = ioread32(hw->hw_addr + REG_SPI_FLASH_CTRL); |
| if (value & SPI_FLASH_CTRL_EN_VPD) { |
| value &= ~SPI_FLASH_CTRL_EN_VPD; |
| iowrite32(value, hw->hw_addr + REG_SPI_FLASH_CTRL); |
| } |
| |
| value = ioread16(hw->hw_addr + REG_PCIE_CAP_LIST); |
| return ((value & 0xFF00) == 0x6C00) ? 0 : 1; |
| } |
| |
| static bool atl1_read_eeprom(struct atl1_hw *hw, u32 offset, u32 *p_value) |
| { |
| int i; |
| u32 control; |
| |
| if (offset & 3) |
| /* address do not align */ |
| return false; |
| |
| iowrite32(0, hw->hw_addr + REG_VPD_DATA); |
| control = (offset & VPD_CAP_VPD_ADDR_MASK) << VPD_CAP_VPD_ADDR_SHIFT; |
| iowrite32(control, hw->hw_addr + REG_VPD_CAP); |
| ioread32(hw->hw_addr + REG_VPD_CAP); |
| |
| for (i = 0; i < 10; i++) { |
| msleep(2); |
| control = ioread32(hw->hw_addr + REG_VPD_CAP); |
| if (control & VPD_CAP_VPD_FLAG) |
| break; |
| } |
| if (control & VPD_CAP_VPD_FLAG) { |
| *p_value = ioread32(hw->hw_addr + REG_VPD_DATA); |
| return true; |
| } |
| /* timeout */ |
| return false; |
| } |
| |
| /* |
| * Reads the value from a PHY register |
| * hw - Struct containing variables accessed by shared code |
| * reg_addr - address of the PHY register to read |
| */ |
| static s32 atl1_read_phy_reg(struct atl1_hw *hw, u16 reg_addr, u16 *phy_data) |
| { |
| u32 val; |
| int i; |
| |
| val = ((u32) (reg_addr & MDIO_REG_ADDR_MASK)) << MDIO_REG_ADDR_SHIFT | |
| MDIO_START | MDIO_SUP_PREAMBLE | MDIO_RW | MDIO_CLK_25_4 << |
| MDIO_CLK_SEL_SHIFT; |
| iowrite32(val, hw->hw_addr + REG_MDIO_CTRL); |
| ioread32(hw->hw_addr + REG_MDIO_CTRL); |
| |
| for (i = 0; i < MDIO_WAIT_TIMES; i++) { |
| udelay(2); |
| val = ioread32(hw->hw_addr + REG_MDIO_CTRL); |
| if (!(val & (MDIO_START | MDIO_BUSY))) |
| break; |
| } |
| if (!(val & (MDIO_START | MDIO_BUSY))) { |
| *phy_data = (u16) val; |
| return 0; |
| } |
| return ATLX_ERR_PHY; |
| } |
| |
| #define CUSTOM_SPI_CS_SETUP 2 |
| #define CUSTOM_SPI_CLK_HI 2 |
| #define CUSTOM_SPI_CLK_LO 2 |
| #define CUSTOM_SPI_CS_HOLD 2 |
| #define CUSTOM_SPI_CS_HI 3 |
| |
| static bool atl1_spi_read(struct atl1_hw *hw, u32 addr, u32 *buf) |
| { |
| int i; |
| u32 value; |
| |
| iowrite32(0, hw->hw_addr + REG_SPI_DATA); |
| iowrite32(addr, hw->hw_addr + REG_SPI_ADDR); |
| |
| value = SPI_FLASH_CTRL_WAIT_READY | |
| (CUSTOM_SPI_CS_SETUP & SPI_FLASH_CTRL_CS_SETUP_MASK) << |
| SPI_FLASH_CTRL_CS_SETUP_SHIFT | (CUSTOM_SPI_CLK_HI & |
| SPI_FLASH_CTRL_CLK_HI_MASK) << |
| SPI_FLASH_CTRL_CLK_HI_SHIFT | (CUSTOM_SPI_CLK_LO & |
| SPI_FLASH_CTRL_CLK_LO_MASK) << |
| SPI_FLASH_CTRL_CLK_LO_SHIFT | (CUSTOM_SPI_CS_HOLD & |
| SPI_FLASH_CTRL_CS_HOLD_MASK) << |
| SPI_FLASH_CTRL_CS_HOLD_SHIFT | (CUSTOM_SPI_CS_HI & |
| SPI_FLASH_CTRL_CS_HI_MASK) << |
| SPI_FLASH_CTRL_CS_HI_SHIFT | (1 & SPI_FLASH_CTRL_INS_MASK) << |
| SPI_FLASH_CTRL_INS_SHIFT; |
| |
| iowrite32(value, hw->hw_addr + REG_SPI_FLASH_CTRL); |
| |
| value |= SPI_FLASH_CTRL_START; |
| iowrite32(value, hw->hw_addr + REG_SPI_FLASH_CTRL); |
| ioread32(hw->hw_addr + REG_SPI_FLASH_CTRL); |
| |
| for (i = 0; i < 10; i++) { |
| msleep(1); |
| value = ioread32(hw->hw_addr + REG_SPI_FLASH_CTRL); |
| if (!(value & SPI_FLASH_CTRL_START)) |
| break; |
| } |
| |
| if (value & SPI_FLASH_CTRL_START) |
| return false; |
| |
| *buf = ioread32(hw->hw_addr + REG_SPI_DATA); |
| |
| return true; |
| } |
| |
| /* |
| * get_permanent_address |
| * return 0 if get valid mac address, |
| */ |
| static int atl1_get_permanent_address(struct atl1_hw *hw) |
| { |
| u32 addr[2]; |
| u32 i, control; |
| u16 reg; |
| u8 eth_addr[ETH_ALEN]; |
| bool key_valid; |
| |
| if (is_valid_ether_addr(hw->perm_mac_addr)) |
| return 0; |
| |
| /* init */ |
| addr[0] = addr[1] = 0; |
| |
| if (!atl1_check_eeprom_exist(hw)) { |
| reg = 0; |
| key_valid = false; |
| /* Read out all EEPROM content */ |
| i = 0; |
| while (1) { |
| if (atl1_read_eeprom(hw, i + 0x100, &control)) { |
| if (key_valid) { |
| if (reg == REG_MAC_STA_ADDR) |
| addr[0] = control; |
| else if (reg == (REG_MAC_STA_ADDR + 4)) |
| addr[1] = control; |
| key_valid = false; |
| } else if ((control & 0xff) == 0x5A) { |
| key_valid = true; |
| reg = (u16) (control >> 16); |
| } else |
| break; |
| } else |
| /* read error */ |
| break; |
| i += 4; |
| } |
| |
| *(u32 *) ð_addr[2] = swab32(addr[0]); |
| *(u16 *) ð_addr[0] = swab16(*(u16 *) &addr[1]); |
| if (is_valid_ether_addr(eth_addr)) { |
| memcpy(hw->perm_mac_addr, eth_addr, ETH_ALEN); |
| return 0; |
| } |
| } |
| |
| /* see if SPI FLAGS exist ? */ |
| addr[0] = addr[1] = 0; |
| reg = 0; |
| key_valid = false; |
| i = 0; |
| while (1) { |
| if (atl1_spi_read(hw, i + 0x1f000, &control)) { |
| if (key_valid) { |
| if (reg == REG_MAC_STA_ADDR) |
| addr[0] = control; |
| else if (reg == (REG_MAC_STA_ADDR + 4)) |
| addr[1] = control; |
| key_valid = false; |
| } else if ((control & 0xff) == 0x5A) { |
| key_valid = true; |
| reg = (u16) (control >> 16); |
| } else |
| /* data end */ |
| break; |
| } else |
| /* read error */ |
| break; |
| i += 4; |
| } |
| |
| *(u32 *) ð_addr[2] = swab32(addr[0]); |
| *(u16 *) ð_addr[0] = swab16(*(u16 *) &addr[1]); |
| if (is_valid_ether_addr(eth_addr)) { |
| memcpy(hw->perm_mac_addr, eth_addr, ETH_ALEN); |
| return 0; |
| } |
| |
| /* |
| * On some motherboards, the MAC address is written by the |
| * BIOS directly to the MAC register during POST, and is |
| * not stored in eeprom. If all else thus far has failed |
| * to fetch the permanent MAC address, try reading it directly. |
| */ |
| addr[0] = ioread32(hw->hw_addr + REG_MAC_STA_ADDR); |
| addr[1] = ioread16(hw->hw_addr + (REG_MAC_STA_ADDR + 4)); |
| *(u32 *) ð_addr[2] = swab32(addr[0]); |
| *(u16 *) ð_addr[0] = swab16(*(u16 *) &addr[1]); |
| if (is_valid_ether_addr(eth_addr)) { |
| memcpy(hw->perm_mac_addr, eth_addr, ETH_ALEN); |
| return 0; |
| } |
| |
| return 1; |
| } |
| |
| /* |
| * Reads the adapter's MAC address from the EEPROM |
| * hw - Struct containing variables accessed by shared code |
| */ |
| static s32 atl1_read_mac_addr(struct atl1_hw *hw) |
| { |
| s32 ret = 0; |
| u16 i; |
| |
| if (atl1_get_permanent_address(hw)) { |
| eth_random_addr(hw->perm_mac_addr); |
| ret = 1; |
| } |
| |
| for (i = 0; i < ETH_ALEN; i++) |
| hw->mac_addr[i] = hw->perm_mac_addr[i]; |
| return ret; |
| } |
| |
| /* |
| * Hashes an address to determine its location in the multicast table |
| * hw - Struct containing variables accessed by shared code |
| * mc_addr - the multicast address to hash |
| * |
| * atl1_hash_mc_addr |
| * purpose |
| * set hash value for a multicast address |
| * hash calcu processing : |
| * 1. calcu 32bit CRC for multicast address |
| * 2. reverse crc with MSB to LSB |
| */ |
| static u32 atl1_hash_mc_addr(struct atl1_hw *hw, u8 *mc_addr) |
| { |
| u32 crc32, value = 0; |
| int i; |
| |
| crc32 = ether_crc_le(6, mc_addr); |
| for (i = 0; i < 32; i++) |
| value |= (((crc32 >> i) & 1) << (31 - i)); |
| |
| return value; |
| } |
| |
| /* |
| * Sets the bit in the multicast table corresponding to the hash value. |
| * hw - Struct containing variables accessed by shared code |
| * hash_value - Multicast address hash value |
| */ |
| static void atl1_hash_set(struct atl1_hw *hw, u32 hash_value) |
| { |
| u32 hash_bit, hash_reg; |
| u32 mta; |
| |
| /* |
| * The HASH Table is a register array of 2 32-bit registers. |
| * It is treated like an array of 64 bits. We want to set |
| * bit BitArray[hash_value]. So we figure out what register |
| * the bit is in, read it, OR in the new bit, then write |
| * back the new value. The register is determined by the |
| * upper 7 bits of the hash value and the bit within that |
| * register are determined by the lower 5 bits of the value. |
| */ |
| hash_reg = (hash_value >> 31) & 0x1; |
| hash_bit = (hash_value >> 26) & 0x1F; |
| mta = ioread32((hw->hw_addr + REG_RX_HASH_TABLE) + (hash_reg << 2)); |
| mta |= (1 << hash_bit); |
| iowrite32(mta, (hw->hw_addr + REG_RX_HASH_TABLE) + (hash_reg << 2)); |
| } |
| |
| /* |
| * Writes a value to a PHY register |
| * hw - Struct containing variables accessed by shared code |
| * reg_addr - address of the PHY register to write |
| * data - data to write to the PHY |
| */ |
| static s32 atl1_write_phy_reg(struct atl1_hw *hw, u32 reg_addr, u16 phy_data) |
| { |
| int i; |
| u32 val; |
| |
| val = ((u32) (phy_data & MDIO_DATA_MASK)) << MDIO_DATA_SHIFT | |
| (reg_addr & MDIO_REG_ADDR_MASK) << MDIO_REG_ADDR_SHIFT | |
| MDIO_SUP_PREAMBLE | |
| MDIO_START | MDIO_CLK_25_4 << MDIO_CLK_SEL_SHIFT; |
| iowrite32(val, hw->hw_addr + REG_MDIO_CTRL); |
| ioread32(hw->hw_addr + REG_MDIO_CTRL); |
| |
| for (i = 0; i < MDIO_WAIT_TIMES; i++) { |
| udelay(2); |
| val = ioread32(hw->hw_addr + REG_MDIO_CTRL); |
| if (!(val & (MDIO_START | MDIO_BUSY))) |
| break; |
| } |
| |
| if (!(val & (MDIO_START | MDIO_BUSY))) |
| return 0; |
| |
| return ATLX_ERR_PHY; |
| } |
| |
| /* |
| * Make L001's PHY out of Power Saving State (bug) |
| * hw - Struct containing variables accessed by shared code |
| * when power on, L001's PHY always on Power saving State |
| * (Gigabit Link forbidden) |
| */ |
| static s32 atl1_phy_leave_power_saving(struct atl1_hw *hw) |
| { |
| s32 ret; |
| ret = atl1_write_phy_reg(hw, 29, 0x0029); |
| if (ret) |
| return ret; |
| return atl1_write_phy_reg(hw, 30, 0); |
| } |
| |
| /* |
| * Resets the PHY and make all config validate |
| * hw - Struct containing variables accessed by shared code |
| * |
| * Sets bit 15 and 12 of the MII Control regiser (for F001 bug) |
| */ |
| static s32 atl1_phy_reset(struct atl1_hw *hw) |
| { |
| struct pci_dev *pdev = hw->back->pdev; |
| struct atl1_adapter *adapter = hw->back; |
| s32 ret_val; |
| u16 phy_data; |
| |
| if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR || |
| hw->media_type == MEDIA_TYPE_1000M_FULL) |
| phy_data = MII_CR_RESET | MII_CR_AUTO_NEG_EN; |
| else { |
| switch (hw->media_type) { |
| case MEDIA_TYPE_100M_FULL: |
| phy_data = |
| MII_CR_FULL_DUPLEX | MII_CR_SPEED_100 | |
| MII_CR_RESET; |
| break; |
| case MEDIA_TYPE_100M_HALF: |
| phy_data = MII_CR_SPEED_100 | MII_CR_RESET; |
| break; |
| case MEDIA_TYPE_10M_FULL: |
| phy_data = |
| MII_CR_FULL_DUPLEX | MII_CR_SPEED_10 | MII_CR_RESET; |
| break; |
| default: |
| /* MEDIA_TYPE_10M_HALF: */ |
| phy_data = MII_CR_SPEED_10 | MII_CR_RESET; |
| break; |
| } |
| } |
| |
| ret_val = atl1_write_phy_reg(hw, MII_BMCR, phy_data); |
| if (ret_val) { |
| u32 val; |
| int i; |
| /* pcie serdes link may be down! */ |
| if (netif_msg_hw(adapter)) |
| dev_dbg(&pdev->dev, "pcie phy link down\n"); |
| |
| for (i = 0; i < 25; i++) { |
| msleep(1); |
| val = ioread32(hw->hw_addr + REG_MDIO_CTRL); |
| if (!(val & (MDIO_START | MDIO_BUSY))) |
| break; |
| } |
| |
| if ((val & (MDIO_START | MDIO_BUSY)) != 0) { |
| if (netif_msg_hw(adapter)) |
| dev_warn(&pdev->dev, |
| "pcie link down at least 25ms\n"); |
| return ret_val; |
| } |
| } |
| return 0; |
| } |
| |
| /* |
| * Configures PHY autoneg and flow control advertisement settings |
| * hw - Struct containing variables accessed by shared code |
| */ |
| static s32 atl1_phy_setup_autoneg_adv(struct atl1_hw *hw) |
| { |
| s32 ret_val; |
| s16 mii_autoneg_adv_reg; |
| s16 mii_1000t_ctrl_reg; |
| |
| /* Read the MII Auto-Neg Advertisement Register (Address 4). */ |
| mii_autoneg_adv_reg = MII_AR_DEFAULT_CAP_MASK; |
| |
| /* Read the MII 1000Base-T Control Register (Address 9). */ |
| mii_1000t_ctrl_reg = MII_ATLX_CR_1000T_DEFAULT_CAP_MASK; |
| |
| /* |
| * First we clear all the 10/100 mb speed bits in the Auto-Neg |
| * Advertisement Register (Address 4) and the 1000 mb speed bits in |
| * the 1000Base-T Control Register (Address 9). |
| */ |
| mii_autoneg_adv_reg &= ~MII_AR_SPEED_MASK; |
| mii_1000t_ctrl_reg &= ~MII_ATLX_CR_1000T_SPEED_MASK; |
| |
| /* |
| * Need to parse media_type and set up |
| * the appropriate PHY registers. |
| */ |
| switch (hw->media_type) { |
| case MEDIA_TYPE_AUTO_SENSOR: |
| mii_autoneg_adv_reg |= (MII_AR_10T_HD_CAPS | |
| MII_AR_10T_FD_CAPS | |
| MII_AR_100TX_HD_CAPS | |
| MII_AR_100TX_FD_CAPS); |
| mii_1000t_ctrl_reg |= MII_ATLX_CR_1000T_FD_CAPS; |
| break; |
| |
| case MEDIA_TYPE_1000M_FULL: |
| mii_1000t_ctrl_reg |= MII_ATLX_CR_1000T_FD_CAPS; |
| break; |
| |
| case MEDIA_TYPE_100M_FULL: |
| mii_autoneg_adv_reg |= MII_AR_100TX_FD_CAPS; |
| break; |
| |
| case MEDIA_TYPE_100M_HALF: |
| mii_autoneg_adv_reg |= MII_AR_100TX_HD_CAPS; |
| break; |
| |
| case MEDIA_TYPE_10M_FULL: |
| mii_autoneg_adv_reg |= MII_AR_10T_FD_CAPS; |
| break; |
| |
| default: |
| mii_autoneg_adv_reg |= MII_AR_10T_HD_CAPS; |
| break; |
| } |
| |
| /* flow control fixed to enable all */ |
| mii_autoneg_adv_reg |= (MII_AR_ASM_DIR | MII_AR_PAUSE); |
| |
| hw->mii_autoneg_adv_reg = mii_autoneg_adv_reg; |
| hw->mii_1000t_ctrl_reg = mii_1000t_ctrl_reg; |
| |
| ret_val = atl1_write_phy_reg(hw, MII_ADVERTISE, mii_autoneg_adv_reg); |
| if (ret_val) |
| return ret_val; |
| |
| ret_val = atl1_write_phy_reg(hw, MII_ATLX_CR, mii_1000t_ctrl_reg); |
| if (ret_val) |
| return ret_val; |
| |
| return 0; |
| } |
| |
| /* |
| * Configures link settings. |
| * hw - Struct containing variables accessed by shared code |
| * Assumes the hardware has previously been reset and the |
| * transmitter and receiver are not enabled. |
| */ |
| static s32 atl1_setup_link(struct atl1_hw *hw) |
| { |
| struct pci_dev *pdev = hw->back->pdev; |
| struct atl1_adapter *adapter = hw->back; |
| s32 ret_val; |
| |
| /* |
| * Options: |
| * PHY will advertise value(s) parsed from |
| * autoneg_advertised and fc |
| * no matter what autoneg is , We will not wait link result. |
| */ |
| ret_val = atl1_phy_setup_autoneg_adv(hw); |
| if (ret_val) { |
| if (netif_msg_link(adapter)) |
| dev_dbg(&pdev->dev, |
| "error setting up autonegotiation\n"); |
| return ret_val; |
| } |
| /* SW.Reset , En-Auto-Neg if needed */ |
| ret_val = atl1_phy_reset(hw); |
| if (ret_val) { |
| if (netif_msg_link(adapter)) |
| dev_dbg(&pdev->dev, "error resetting phy\n"); |
| return ret_val; |
| } |
| hw->phy_configured = true; |
| return ret_val; |
| } |
| |
| static void atl1_init_flash_opcode(struct atl1_hw *hw) |
| { |
| if (hw->flash_vendor >= ARRAY_SIZE(flash_table)) |
| /* Atmel */ |
| hw->flash_vendor = 0; |
| |
| /* Init OP table */ |
| iowrite8(flash_table[hw->flash_vendor].cmd_program, |
| hw->hw_addr + REG_SPI_FLASH_OP_PROGRAM); |
| iowrite8(flash_table[hw->flash_vendor].cmd_sector_erase, |
| hw->hw_addr + REG_SPI_FLASH_OP_SC_ERASE); |
| iowrite8(flash_table[hw->flash_vendor].cmd_chip_erase, |
| hw->hw_addr + REG_SPI_FLASH_OP_CHIP_ERASE); |
| iowrite8(flash_table[hw->flash_vendor].cmd_rdid, |
| hw->hw_addr + REG_SPI_FLASH_OP_RDID); |
| iowrite8(flash_table[hw->flash_vendor].cmd_wren, |
| hw->hw_addr + REG_SPI_FLASH_OP_WREN); |
| iowrite8(flash_table[hw->flash_vendor].cmd_rdsr, |
| hw->hw_addr + REG_SPI_FLASH_OP_RDSR); |
| iowrite8(flash_table[hw->flash_vendor].cmd_wrsr, |
| hw->hw_addr + REG_SPI_FLASH_OP_WRSR); |
| iowrite8(flash_table[hw->flash_vendor].cmd_read, |
| hw->hw_addr + REG_SPI_FLASH_OP_READ); |
| } |
| |
| /* |
| * Performs basic configuration of the adapter. |
| * hw - Struct containing variables accessed by shared code |
| * Assumes that the controller has previously been reset and is in a |
| * post-reset uninitialized state. Initializes multicast table, |
| * and Calls routines to setup link |
| * Leaves the transmit and receive units disabled and uninitialized. |
| */ |
| static s32 atl1_init_hw(struct atl1_hw *hw) |
| { |
| u32 ret_val = 0; |
| |
| /* Zero out the Multicast HASH table */ |
| iowrite32(0, hw->hw_addr + REG_RX_HASH_TABLE); |
| /* clear the old settings from the multicast hash table */ |
| iowrite32(0, (hw->hw_addr + REG_RX_HASH_TABLE) + (1 << 2)); |
| |
| atl1_init_flash_opcode(hw); |
| |
| if (!hw->phy_configured) { |
| /* enable GPHY LinkChange Interrupt */ |
| ret_val = atl1_write_phy_reg(hw, 18, 0xC00); |
| if (ret_val) |
| return ret_val; |
| /* make PHY out of power-saving state */ |
| ret_val = atl1_phy_leave_power_saving(hw); |
| if (ret_val) |
| return ret_val; |
| /* Call a subroutine to configure the link */ |
| ret_val = atl1_setup_link(hw); |
| } |
| return ret_val; |
| } |
| |
| /* |
| * Detects the current speed and duplex settings of the hardware. |
| * hw - Struct containing variables accessed by shared code |
| * speed - Speed of the connection |
| * duplex - Duplex setting of the connection |
| */ |
| static s32 atl1_get_speed_and_duplex(struct atl1_hw *hw, u16 *speed, u16 *duplex) |
| { |
| struct pci_dev *pdev = hw->back->pdev; |
| struct atl1_adapter *adapter = hw->back; |
| s32 ret_val; |
| u16 phy_data; |
| |
| /* ; --- Read PHY Specific Status Register (17) */ |
| ret_val = atl1_read_phy_reg(hw, MII_ATLX_PSSR, &phy_data); |
| if (ret_val) |
| return ret_val; |
| |
| if (!(phy_data & MII_ATLX_PSSR_SPD_DPLX_RESOLVED)) |
| return ATLX_ERR_PHY_RES; |
| |
| switch (phy_data & MII_ATLX_PSSR_SPEED) { |
| case MII_ATLX_PSSR_1000MBS: |
| *speed = SPEED_1000; |
| break; |
| case MII_ATLX_PSSR_100MBS: |
| *speed = SPEED_100; |
| break; |
| case MII_ATLX_PSSR_10MBS: |
| *speed = SPEED_10; |
| break; |
| default: |
| if (netif_msg_hw(adapter)) |
| dev_dbg(&pdev->dev, "error getting speed\n"); |
| return ATLX_ERR_PHY_SPEED; |
| break; |
| } |
| if (phy_data & MII_ATLX_PSSR_DPLX) |
| *duplex = FULL_DUPLEX; |
| else |
| *duplex = HALF_DUPLEX; |
| |
| return 0; |
| } |
| |
| static void atl1_set_mac_addr(struct atl1_hw *hw) |
| { |
| u32 value; |
| /* |
| * 00-0B-6A-F6-00-DC |
| * 0: 6AF600DC 1: 000B |
| * low dword |
| */ |
| value = (((u32) hw->mac_addr[2]) << 24) | |
| (((u32) hw->mac_addr[3]) << 16) | |
| (((u32) hw->mac_addr[4]) << 8) | (((u32) hw->mac_addr[5])); |
| iowrite32(value, hw->hw_addr + REG_MAC_STA_ADDR); |
| /* high dword */ |
| value = (((u32) hw->mac_addr[0]) << 8) | (((u32) hw->mac_addr[1])); |
| iowrite32(value, (hw->hw_addr + REG_MAC_STA_ADDR) + (1 << 2)); |
| } |
| |
| /** |
| * atl1_sw_init - Initialize general software structures (struct atl1_adapter) |
| * @adapter: board private structure to initialize |
| * |
| * atl1_sw_init initializes the Adapter private data structure. |
| * Fields are initialized based on PCI device information and |
| * OS network device settings (MTU size). |
| */ |
| static int __devinit atl1_sw_init(struct atl1_adapter *adapter) |
| { |
| struct atl1_hw *hw = &adapter->hw; |
| struct net_device *netdev = adapter->netdev; |
| |
| hw->max_frame_size = netdev->mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN; |
| hw->min_frame_size = ETH_ZLEN + ETH_FCS_LEN; |
| |
| adapter->wol = 0; |
| device_set_wakeup_enable(&adapter->pdev->dev, false); |
| adapter->rx_buffer_len = (hw->max_frame_size + 7) & ~7; |
| adapter->ict = 50000; /* 100ms */ |
| adapter->link_speed = SPEED_0; /* hardware init */ |
| adapter->link_duplex = FULL_DUPLEX; |
| |
| hw->phy_configured = false; |
| hw->preamble_len = 7; |
| hw->ipgt = 0x60; |
| hw->min_ifg = 0x50; |
| hw->ipgr1 = 0x40; |
| hw->ipgr2 = 0x60; |
| hw->max_retry = 0xf; |
| hw->lcol = 0x37; |
| hw->jam_ipg = 7; |
| hw->rfd_burst = 8; |
| hw->rrd_burst = 8; |
| hw->rfd_fetch_gap = 1; |
| hw->rx_jumbo_th = adapter->rx_buffer_len / 8; |
| hw->rx_jumbo_lkah = 1; |
| hw->rrd_ret_timer = 16; |
| hw->tpd_burst = 4; |
| hw->tpd_fetch_th = 16; |
| hw->txf_burst = 0x100; |
| hw->tx_jumbo_task_th = (hw->max_frame_size + 7) >> 3; |
| hw->tpd_fetch_gap = 1; |
| hw->rcb_value = atl1_rcb_64; |
| hw->dma_ord = atl1_dma_ord_enh; |
| hw->dmar_block = atl1_dma_req_256; |
| hw->dmaw_block = atl1_dma_req_256; |
| hw->cmb_rrd = 4; |
| hw->cmb_tpd = 4; |
| hw->cmb_rx_timer = 1; /* about 2us */ |
| hw->cmb_tx_timer = 1; /* about 2us */ |
| hw->smb_timer = 100000; /* about 200ms */ |
| |
| spin_lock_init(&adapter->lock); |
| spin_lock_init(&adapter->mb_lock); |
| |
| return 0; |
| } |
| |
| static int mdio_read(struct net_device *netdev, int phy_id, int reg_num) |
| { |
| struct atl1_adapter *adapter = netdev_priv(netdev); |
| u16 result; |
| |
| atl1_read_phy_reg(&adapter->hw, reg_num & 0x1f, &result); |
| |
| return result; |
| } |
| |
| static void mdio_write(struct net_device *netdev, int phy_id, int reg_num, |
| int val) |
| { |
| struct atl1_adapter *adapter = netdev_priv(netdev); |
| |
| atl1_write_phy_reg(&adapter->hw, reg_num, val); |
| } |
| |
| static int atl1_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) |
| { |
| struct atl1_adapter *adapter = netdev_priv(netdev); |
| unsigned long flags; |
| int retval; |
| |
| if (!netif_running(netdev)) |
| return -EINVAL; |
| |
| spin_lock_irqsave(&adapter->lock, flags); |
| retval = generic_mii_ioctl(&adapter->mii, if_mii(ifr), cmd, NULL); |
| spin_unlock_irqrestore(&adapter->lock, flags); |
| |
| return retval; |
| } |
| |
| /** |
| * atl1_setup_mem_resources - allocate Tx / RX descriptor resources |
| * @adapter: board private structure |
| * |
| * Return 0 on success, negative on failure |
| */ |
| static s32 atl1_setup_ring_resources(struct atl1_adapter *adapter) |
| { |
| struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring; |
| struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring; |
| struct atl1_rrd_ring *rrd_ring = &adapter->rrd_ring; |
| struct atl1_ring_header *ring_header = &adapter->ring_header; |
| struct pci_dev *pdev = adapter->pdev; |
| int size; |
| u8 offset = 0; |
| |
| size = sizeof(struct atl1_buffer) * (tpd_ring->count + rfd_ring->count); |
| tpd_ring->buffer_info = kzalloc(size, GFP_KERNEL); |
| if (unlikely(!tpd_ring->buffer_info)) { |
| if (netif_msg_drv(adapter)) |
| dev_err(&pdev->dev, "kzalloc failed , size = D%d\n", |
| size); |
| goto err_nomem; |
| } |
| rfd_ring->buffer_info = |
| (tpd_ring->buffer_info + tpd_ring->count); |
| |
| /* |
| * real ring DMA buffer |
| * each ring/block may need up to 8 bytes for alignment, hence the |
| * additional 40 bytes tacked onto the end. |
| */ |
| ring_header->size = size = |
| sizeof(struct tx_packet_desc) * tpd_ring->count |
| + sizeof(struct rx_free_desc) * rfd_ring->count |
| + sizeof(struct rx_return_desc) * rrd_ring->count |
| + sizeof(struct coals_msg_block) |
| + sizeof(struct stats_msg_block) |
| + 40; |
| |
| ring_header->desc = pci_alloc_consistent(pdev, ring_header->size, |
| &ring_header->dma); |
| if (unlikely(!ring_header->desc)) { |
| if (netif_msg_drv(adapter)) |
| dev_err(&pdev->dev, "pci_alloc_consistent failed\n"); |
| goto err_nomem; |
| } |
| |
| memset(ring_header->desc, 0, ring_header->size); |
| |
| /* init TPD ring */ |
| tpd_ring->dma = ring_header->dma; |
| offset = (tpd_ring->dma & 0x7) ? (8 - (ring_header->dma & 0x7)) : 0; |
| tpd_ring->dma += offset; |
| tpd_ring->desc = (u8 *) ring_header->desc + offset; |
| tpd_ring->size = sizeof(struct tx_packet_desc) * tpd_ring->count; |
| |
| /* init RFD ring */ |
| rfd_ring->dma = tpd_ring->dma + tpd_ring->size; |
| offset = (rfd_ring->dma & 0x7) ? (8 - (rfd_ring->dma & 0x7)) : 0; |
| rfd_ring->dma += offset; |
| rfd_ring->desc = (u8 *) tpd_ring->desc + (tpd_ring->size + offset); |
| rfd_ring->size = sizeof(struct rx_free_desc) * rfd_ring->count; |
| |
| |
| /* init RRD ring */ |
| rrd_ring->dma = rfd_ring->dma + rfd_ring->size; |
| offset = (rrd_ring->dma & 0x7) ? (8 - (rrd_ring->dma & 0x7)) : 0; |
| rrd_ring->dma += offset; |
| rrd_ring->desc = (u8 *) rfd_ring->desc + (rfd_ring->size + offset); |
| rrd_ring->size = sizeof(struct rx_return_desc) * rrd_ring->count; |
| |
| |
| /* init CMB */ |
| adapter->cmb.dma = rrd_ring->dma + rrd_ring->size; |
| offset = (adapter->cmb.dma & 0x7) ? (8 - (adapter->cmb.dma & 0x7)) : 0; |
| adapter->cmb.dma += offset; |
| adapter->cmb.cmb = (struct coals_msg_block *) |
| ((u8 *) rrd_ring->desc + (rrd_ring->size + offset)); |
| |
| /* init SMB */ |
| adapter->smb.dma = adapter->cmb.dma + sizeof(struct coals_msg_block); |
| offset = (adapter->smb.dma & 0x7) ? (8 - (adapter->smb.dma & 0x7)) : 0; |
| adapter->smb.dma += offset; |
| adapter->smb.smb = (struct stats_msg_block *) |
| ((u8 *) adapter->cmb.cmb + |
| (sizeof(struct coals_msg_block) + offset)); |
| |
| return 0; |
| |
| err_nomem: |
| kfree(tpd_ring->buffer_info); |
| return -ENOMEM; |
| } |
| |
| static void atl1_init_ring_ptrs(struct atl1_adapter *adapter) |
| { |
| struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring; |
| struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring; |
| struct atl1_rrd_ring *rrd_ring = &adapter->rrd_ring; |
| |
| atomic_set(&tpd_ring->next_to_use, 0); |
| atomic_set(&tpd_ring->next_to_clean, 0); |
| |
| rfd_ring->next_to_clean = 0; |
| atomic_set(&rfd_ring->next_to_use, 0); |
| |
| rrd_ring->next_to_use = 0; |
| atomic_set(&rrd_ring->next_to_clean, 0); |
| } |
| |
| /** |
| * atl1_clean_rx_ring - Free RFD Buffers |
| * @adapter: board private structure |
| */ |
| static void atl1_clean_rx_ring(struct atl1_adapter *adapter) |
| { |
| struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring; |
| struct atl1_rrd_ring *rrd_ring = &adapter->rrd_ring; |
| struct atl1_buffer *buffer_info; |
| struct pci_dev *pdev = adapter->pdev; |
| unsigned long size; |
| unsigned int i; |
| |
| /* Free all the Rx ring sk_buffs */ |
| for (i = 0; i < rfd_ring->count; i++) { |
| buffer_info = &rfd_ring->buffer_info[i]; |
| if (buffer_info->dma) { |
| pci_unmap_page(pdev, buffer_info->dma, |
| buffer_info->length, PCI_DMA_FROMDEVICE); |
| buffer_info->dma = 0; |
| } |
| if (buffer_info->skb) { |
| dev_kfree_skb(buffer_info->skb); |
| buffer_info->skb = NULL; |
| } |
| } |
| |
| size = sizeof(struct atl1_buffer) * rfd_ring->count; |
| memset(rfd_ring->buffer_info, 0, size); |
| |
| /* Zero out the descriptor ring */ |
| memset(rfd_ring->desc, 0, rfd_ring->size); |
| |
| rfd_ring->next_to_clean = 0; |
| atomic_set(&rfd_ring->next_to_use, 0); |
| |
| rrd_ring->next_to_use = 0; |
| atomic_set(&rrd_ring->next_to_clean, 0); |
| } |
| |
| /** |
| * atl1_clean_tx_ring - Free Tx Buffers |
| * @adapter: board private structure |
| */ |
| static void atl1_clean_tx_ring(struct atl1_adapter *adapter) |
| { |
| struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring; |
| struct atl1_buffer *buffer_info; |
| struct pci_dev *pdev = adapter->pdev; |
| unsigned long size; |
| unsigned int i; |
| |
| /* Free all the Tx ring sk_buffs */ |
| for (i = 0; i < tpd_ring->count; i++) { |
| buffer_info = &tpd_ring->buffer_info[i]; |
| if (buffer_info->dma) { |
| pci_unmap_page(pdev, buffer_info->dma, |
| buffer_info->length, PCI_DMA_TODEVICE); |
| buffer_info->dma = 0; |
| } |
| } |
| |
| for (i = 0; i < tpd_ring->count; i++) { |
| buffer_info = &tpd_ring->buffer_info[i]; |
| if (buffer_info->skb) { |
| dev_kfree_skb_any(buffer_info->skb); |
| buffer_info->skb = NULL; |
| } |
| } |
| |
| size = sizeof(struct atl1_buffer) * tpd_ring->count; |
| memset(tpd_ring->buffer_info, 0, size); |
| |
| /* Zero out the descriptor ring */ |
| memset(tpd_ring->desc, 0, tpd_ring->size); |
| |
| atomic_set(&tpd_ring->next_to_use, 0); |
| atomic_set(&tpd_ring->next_to_clean, 0); |
| } |
| |
| /** |
| * atl1_free_ring_resources - Free Tx / RX descriptor Resources |
| * @adapter: board private structure |
| * |
| * Free all transmit software resources |
| */ |
| static void atl1_free_ring_resources(struct atl1_adapter *adapter) |
| { |
| struct pci_dev *pdev = adapter->pdev; |
| struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring; |
| struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring; |
| struct atl1_rrd_ring *rrd_ring = &adapter->rrd_ring; |
| struct atl1_ring_header *ring_header = &adapter->ring_header; |
| |
| atl1_clean_tx_ring(adapter); |
| atl1_clean_rx_ring(adapter); |
| |
| kfree(tpd_ring->buffer_info); |
| pci_free_consistent(pdev, ring_header->size, ring_header->desc, |
| ring_header->dma); |
| |
| tpd_ring->buffer_info = NULL; |
| tpd_ring->desc = NULL; |
| tpd_ring->dma = 0; |
| |
| rfd_ring->buffer_info = NULL; |
| rfd_ring->desc = NULL; |
| rfd_ring->dma = 0; |
| |
| rrd_ring->desc = NULL; |
| rrd_ring->dma = 0; |
| |
| adapter->cmb.dma = 0; |
| adapter->cmb.cmb = NULL; |
| |
| adapter->smb.dma = 0; |
| adapter->smb.smb = NULL; |
| } |
| |
| static void atl1_setup_mac_ctrl(struct atl1_adapter *adapter) |
| { |
| u32 value; |
| struct atl1_hw *hw = &adapter->hw; |
| struct net_device *netdev = adapter->netdev; |
| /* Config MAC CTRL Register */ |
| value = MAC_CTRL_TX_EN | MAC_CTRL_RX_EN; |
| /* duplex */ |
| if (FULL_DUPLEX == adapter->link_duplex) |
| value |= MAC_CTRL_DUPLX; |
| /* speed */ |
| value |= ((u32) ((SPEED_1000 == adapter->link_speed) ? |
| MAC_CTRL_SPEED_1000 : MAC_CTRL_SPEED_10_100) << |
| MAC_CTRL_SPEED_SHIFT); |
| /* flow control */ |
| value |= (MAC_CTRL_TX_FLOW | MAC_CTRL_RX_FLOW); |
| /* PAD & CRC */ |
| value |= (MAC_CTRL_ADD_CRC | MAC_CTRL_PAD); |
| /* preamble length */ |
| value |= (((u32) adapter->hw.preamble_len |
| & MAC_CTRL_PRMLEN_MASK) << MAC_CTRL_PRMLEN_SHIFT); |
| /* vlan */ |
| __atlx_vlan_mode(netdev->features, &value); |
| /* rx checksum |
| if (adapter->rx_csum) |
| value |= MAC_CTRL_RX_CHKSUM_EN; |
| */ |
| /* filter mode */ |
| value |= MAC_CTRL_BC_EN; |
| if (netdev->flags & IFF_PROMISC) |
| value |= MAC_CTRL_PROMIS_EN; |
| else if (netdev->flags & IFF_ALLMULTI) |
| value |= MAC_CTRL_MC_ALL_EN; |
| /* value |= MAC_CTRL_LOOPBACK; */ |
| iowrite32(value, hw->hw_addr + REG_MAC_CTRL); |
| } |
| |
| static u32 atl1_check_link(struct atl1_adapter *adapter) |
| { |
| struct atl1_hw *hw = &adapter->hw; |
| struct net_device *netdev = adapter->netdev; |
| u32 ret_val; |
| u16 speed, duplex, phy_data; |
| int reconfig = 0; |
| |
| /* MII_BMSR must read twice */ |
| atl1_read_phy_reg(hw, MII_BMSR, &phy_data); |
| atl1_read_phy_reg(hw, MII_BMSR, &phy_data); |
| if (!(phy_data & BMSR_LSTATUS)) { |
| /* link down */ |
| if (netif_carrier_ok(netdev)) { |
| /* old link state: Up */ |
| if (netif_msg_link(adapter)) |
| dev_info(&adapter->pdev->dev, "link is down\n"); |
| adapter->link_speed = SPEED_0; |
| netif_carrier_off(netdev); |
| } |
| return 0; |
| } |
| |
| /* Link Up */ |
| ret_val = atl1_get_speed_and_duplex(hw, &speed, &duplex); |
| if (ret_val) |
| return ret_val; |
| |
| switch (hw->media_type) { |
| case MEDIA_TYPE_1000M_FULL: |
| if (speed != SPEED_1000 || duplex != FULL_DUPLEX) |
| reconfig = 1; |
| break; |
| case MEDIA_TYPE_100M_FULL: |
| if (speed != SPEED_100 || duplex != FULL_DUPLEX) |
| reconfig = 1; |
| break; |
| case MEDIA_TYPE_100M_HALF: |
| if (speed != SPEED_100 || duplex != HALF_DUPLEX) |
| reconfig = 1; |
| break; |
| case MEDIA_TYPE_10M_FULL: |
| if (speed != SPEED_10 || duplex != FULL_DUPLEX) |
| reconfig = 1; |
| break; |
| case MEDIA_TYPE_10M_HALF: |
| if (speed != SPEED_10 || duplex != HALF_DUPLEX) |
| reconfig = 1; |
| break; |
| } |
| |
| /* link result is our setting */ |
| if (!reconfig) { |
| if (adapter->link_speed != speed || |
| adapter->link_duplex != duplex) { |
| adapter->link_speed = speed; |
| adapter->link_duplex = duplex; |
| atl1_setup_mac_ctrl(adapter); |
| if (netif_msg_link(adapter)) |
| dev_info(&adapter->pdev->dev, |
| "%s link is up %d Mbps %s\n", |
| netdev->name, adapter->link_speed, |
| adapter->link_duplex == FULL_DUPLEX ? |
| "full duplex" : "half duplex"); |
| } |
| if (!netif_carrier_ok(netdev)) { |
| /* Link down -> Up */ |
| netif_carrier_on(netdev); |
| } |
| return 0; |
| } |
| |
| /* change original link status */ |
| if (netif_carrier_ok(netdev)) { |
| adapter->link_speed = SPEED_0; |
| netif_carrier_off(netdev); |
| netif_stop_queue(netdev); |
| } |
| |
| if (hw->media_type != MEDIA_TYPE_AUTO_SENSOR && |
| hw->media_type != MEDIA_TYPE_1000M_FULL) { |
| switch (hw->media_type) { |
| case MEDIA_TYPE_100M_FULL: |
| phy_data = MII_CR_FULL_DUPLEX | MII_CR_SPEED_100 | |
| MII_CR_RESET; |
| break; |
| case MEDIA_TYPE_100M_HALF: |
| phy_data = MII_CR_SPEED_100 | MII_CR_RESET; |
| break; |
| case MEDIA_TYPE_10M_FULL: |
| phy_data = |
| MII_CR_FULL_DUPLEX | MII_CR_SPEED_10 | MII_CR_RESET; |
| break; |
| default: |
| /* MEDIA_TYPE_10M_HALF: */ |
| phy_data = MII_CR_SPEED_10 | MII_CR_RESET; |
| break; |
| } |
| atl1_write_phy_reg(hw, MII_BMCR, phy_data); |
| return 0; |
| } |
| |
| /* auto-neg, insert timer to re-config phy */ |
| if (!adapter->phy_timer_pending) { |
| adapter->phy_timer_pending = true; |
| mod_timer(&adapter->phy_config_timer, |
| round_jiffies(jiffies + 3 * HZ)); |
| } |
| |
| return 0; |
| } |
| |
| static void set_flow_ctrl_old(struct atl1_adapter *adapter) |
| { |
| u32 hi, lo, value; |
| |
| /* RFD Flow Control */ |
| value = adapter->rfd_ring.count; |
| hi = value / 16; |
| if (hi < 2) |
| hi = 2; |
| lo = value * 7 / 8; |
| |
| value = ((hi & RXQ_RXF_PAUSE_TH_HI_MASK) << RXQ_RXF_PAUSE_TH_HI_SHIFT) | |
| ((lo & RXQ_RXF_PAUSE_TH_LO_MASK) << RXQ_RXF_PAUSE_TH_LO_SHIFT); |
| iowrite32(value, adapter->hw.hw_addr + REG_RXQ_RXF_PAUSE_THRESH); |
| |
| /* RRD Flow Control */ |
| value = adapter->rrd_ring.count; |
| lo = value / 16; |
| hi = value * 7 / 8; |
| if (lo < 2) |
| lo = 2; |
| value = ((hi & RXQ_RRD_PAUSE_TH_HI_MASK) << RXQ_RRD_PAUSE_TH_HI_SHIFT) | |
| ((lo & RXQ_RRD_PAUSE_TH_LO_MASK) << RXQ_RRD_PAUSE_TH_LO_SHIFT); |
| iowrite32(value, adapter->hw.hw_addr + REG_RXQ_RRD_PAUSE_THRESH); |
| } |
| |
| static void set_flow_ctrl_new(struct atl1_hw *hw) |
| { |
| u32 hi, lo, value; |
| |
| /* RXF Flow Control */ |
| value = ioread32(hw->hw_addr + REG_SRAM_RXF_LEN); |
| lo = value / 16; |
| if (lo < 192) |
| lo = 192; |
| hi = value * 7 / 8; |
| if (hi < lo) |
| hi = lo + 16; |
| value = ((hi & RXQ_RXF_PAUSE_TH_HI_MASK) << RXQ_RXF_PAUSE_TH_HI_SHIFT) | |
| ((lo & RXQ_RXF_PAUSE_TH_LO_MASK) << RXQ_RXF_PAUSE_TH_LO_SHIFT); |
| iowrite32(value, hw->hw_addr + REG_RXQ_RXF_PAUSE_THRESH); |
| |
| /* RRD Flow Control */ |
| value = ioread32(hw->hw_addr + REG_SRAM_RRD_LEN); |
| lo = value / 8; |
| hi = value * 7 / 8; |
| if (lo < 2) |
| lo = 2; |
| if (hi < lo) |
| hi = lo + 3; |
| value = ((hi & RXQ_RRD_PAUSE_TH_HI_MASK) << RXQ_RRD_PAUSE_TH_HI_SHIFT) | |
| ((lo & RXQ_RRD_PAUSE_TH_LO_MASK) << RXQ_RRD_PAUSE_TH_LO_SHIFT); |
| iowrite32(value, hw->hw_addr + REG_RXQ_RRD_PAUSE_THRESH); |
| } |
| |
| /** |
| * atl1_configure - Configure Transmit&Receive Unit after Reset |
| * @adapter: board private structure |
| * |
| * Configure the Tx /Rx unit of the MAC after a reset. |
| */ |
| static u32 atl1_configure(struct atl1_adapter *adapter) |
| { |
| struct atl1_hw *hw = &adapter->hw; |
| u32 value; |
| |
| /* clear interrupt status */ |
| iowrite32(0xffffffff, adapter->hw.hw_addr + REG_ISR); |
| |
| /* set MAC Address */ |
| value = (((u32) hw->mac_addr[2]) << 24) | |
| (((u32) hw->mac_addr[3]) << 16) | |
| (((u32) hw->mac_addr[4]) << 8) | |
| (((u32) hw->mac_addr[5])); |
| iowrite32(value, hw->hw_addr + REG_MAC_STA_ADDR); |
| value = (((u32) hw->mac_addr[0]) << 8) | (((u32) hw->mac_addr[1])); |
| iowrite32(value, hw->hw_addr + (REG_MAC_STA_ADDR + 4)); |
| |
| /* tx / rx ring */ |
| |
| /* HI base address */ |
| iowrite32((u32) ((adapter->tpd_ring.dma & 0xffffffff00000000ULL) >> 32), |
| hw->hw_addr + REG_DESC_BASE_ADDR_HI); |
| /* LO base address */ |
| iowrite32((u32) (adapter->rfd_ring.dma & 0x00000000ffffffffULL), |
| hw->hw_addr + REG_DESC_RFD_ADDR_LO); |
| iowrite32((u32) (adapter->rrd_ring.dma & 0x00000000ffffffffULL), |
| hw->hw_addr + REG_DESC_RRD_ADDR_LO); |
| iowrite32((u32) (adapter->tpd_ring.dma & 0x00000000ffffffffULL), |
| hw->hw_addr + REG_DESC_TPD_ADDR_LO); |
| iowrite32((u32) (adapter->cmb.dma & 0x00000000ffffffffULL), |
| hw->hw_addr + REG_DESC_CMB_ADDR_LO); |
| iowrite32((u32) (adapter->smb.dma & 0x00000000ffffffffULL), |
| hw->hw_addr + REG_DESC_SMB_ADDR_LO); |
| |
| /* element count */ |
| value = adapter->rrd_ring.count; |
| value <<= 16; |
| value += adapter->rfd_ring.count; |
| iowrite32(value, hw->hw_addr + REG_DESC_RFD_RRD_RING_SIZE); |
| iowrite32(adapter->tpd_ring.count, hw->hw_addr + |
| REG_DESC_TPD_RING_SIZE); |
| |
| /* Load Ptr */ |
| iowrite32(1, hw->hw_addr + REG_LOAD_PTR); |
| |
| /* config Mailbox */ |
| value = ((atomic_read(&adapter->tpd_ring.next_to_use) |
| & MB_TPD_PROD_INDX_MASK) << MB_TPD_PROD_INDX_SHIFT) | |
| ((atomic_read(&adapter->rrd_ring.next_to_clean) |
| & MB_RRD_CONS_INDX_MASK) << MB_RRD_CONS_INDX_SHIFT) | |
| ((atomic_read(&adapter->rfd_ring.next_to_use) |
| & MB_RFD_PROD_INDX_MASK) << MB_RFD_PROD_INDX_SHIFT); |
| iowrite32(value, hw->hw_addr + REG_MAILBOX); |
| |
| /* config IPG/IFG */ |
| value = (((u32) hw->ipgt & MAC_IPG_IFG_IPGT_MASK) |
| << MAC_IPG_IFG_IPGT_SHIFT) | |
| (((u32) hw->min_ifg & MAC_IPG_IFG_MIFG_MASK) |
| << MAC_IPG_IFG_MIFG_SHIFT) | |
| (((u32) hw->ipgr1 & MAC_IPG_IFG_IPGR1_MASK) |
| << MAC_IPG_IFG_IPGR1_SHIFT) | |
| (((u32) hw->ipgr2 & MAC_IPG_IFG_IPGR2_MASK) |
| << MAC_IPG_IFG_IPGR2_SHIFT); |
| iowrite32(value, hw->hw_addr + REG_MAC_IPG_IFG); |
| |
| /* config Half-Duplex Control */ |
| value = ((u32) hw->lcol & MAC_HALF_DUPLX_CTRL_LCOL_MASK) | |
| (((u32) hw->max_retry & MAC_HALF_DUPLX_CTRL_RETRY_MASK) |
| << MAC_HALF_DUPLX_CTRL_RETRY_SHIFT) | |
| MAC_HALF_DUPLX_CTRL_EXC_DEF_EN | |
| (0xa << MAC_HALF_DUPLX_CTRL_ABEBT_SHIFT) | |
| (((u32) hw->jam_ipg & MAC_HALF_DUPLX_CTRL_JAMIPG_MASK) |
| << MAC_HALF_DUPLX_CTRL_JAMIPG_SHIFT); |
| iowrite32(value, hw->hw_addr + REG_MAC_HALF_DUPLX_CTRL); |
| |
| /* set Interrupt Moderator Timer */ |
| iowrite16(adapter->imt, hw->hw_addr + REG_IRQ_MODU_TIMER_INIT); |
| iowrite32(MASTER_CTRL_ITIMER_EN, hw->hw_addr + REG_MASTER_CTRL); |
| |
| /* set Interrupt Clear Timer */ |
| iowrite16(adapter->ict, hw->hw_addr + REG_CMBDISDMA_TIMER); |
| |
| /* set max frame size hw will accept */ |
| iowrite32(hw->max_frame_size, hw->hw_addr + REG_MTU); |
| |
| /* jumbo size & rrd retirement timer */ |
| value = (((u32) hw->rx_jumbo_th & RXQ_JMBOSZ_TH_MASK) |
| << RXQ_JMBOSZ_TH_SHIFT) | |
| (((u32) hw->rx_jumbo_lkah & RXQ_JMBO_LKAH_MASK) |
| << RXQ_JMBO_LKAH_SHIFT) | |
| (((u32) hw->rrd_ret_timer & RXQ_RRD_TIMER_MASK) |
| << RXQ_RRD_TIMER_SHIFT); |
| iowrite32(value, hw->hw_addr + REG_RXQ_JMBOSZ_RRDTIM); |
| |
| /* Flow Control */ |
| switch (hw->dev_rev) { |
| case 0x8001: |
| case 0x9001: |
| case 0x9002: |
| case 0x9003: |
| set_flow_ctrl_old(adapter); |
| break; |
| default: |
| set_flow_ctrl_new(hw); |
| break; |
| } |
| |
| /* config TXQ */ |
| value = (((u32) hw->tpd_burst & TXQ_CTRL_TPD_BURST_NUM_MASK) |
| << TXQ_CTRL_TPD_BURST_NUM_SHIFT) | |
| (((u32) hw->txf_burst & TXQ_CTRL_TXF_BURST_NUM_MASK) |
| << TXQ_CTRL_TXF_BURST_NUM_SHIFT) | |
| (((u32) hw->tpd_fetch_th & TXQ_CTRL_TPD_FETCH_TH_MASK) |
| << TXQ_CTRL_TPD_FETCH_TH_SHIFT) | TXQ_CTRL_ENH_MODE | |
| TXQ_CTRL_EN; |
| iowrite32(value, hw->hw_addr + REG_TXQ_CTRL); |
| |
| /* min tpd fetch gap & tx jumbo packet size threshold for taskoffload */ |
| value = (((u32) hw->tx_jumbo_task_th & TX_JUMBO_TASK_TH_MASK) |
| << TX_JUMBO_TASK_TH_SHIFT) | |
| (((u32) hw->tpd_fetch_gap & TX_TPD_MIN_IPG_MASK) |
| << TX_TPD_MIN_IPG_SHIFT); |
| iowrite32(value, hw->hw_addr + REG_TX_JUMBO_TASK_TH_TPD_IPG); |
| |
| /* config RXQ */ |
| value = (((u32) hw->rfd_burst & RXQ_CTRL_RFD_BURST_NUM_MASK) |
| << RXQ_CTRL_RFD_BURST_NUM_SHIFT) | |
| (((u32) hw->rrd_burst & RXQ_CTRL_RRD_BURST_THRESH_MASK) |
| << RXQ_CTRL_RRD_BURST_THRESH_SHIFT) | |
| (((u32) hw->rfd_fetch_gap & RXQ_CTRL_RFD_PREF_MIN_IPG_MASK) |
| << RXQ_CTRL_RFD_PREF_MIN_IPG_SHIFT) | RXQ_CTRL_CUT_THRU_EN | |
| RXQ_CTRL_EN; |
| iowrite32(value, hw->hw_addr + REG_RXQ_CTRL); |
| |
| /* config DMA Engine */ |
| value = ((((u32) hw->dmar_block) & DMA_CTRL_DMAR_BURST_LEN_MASK) |
| << DMA_CTRL_DMAR_BURST_LEN_SHIFT) | |
| ((((u32) hw->dmaw_block) & DMA_CTRL_DMAW_BURST_LEN_MASK) |
| << DMA_CTRL_DMAW_BURST_LEN_SHIFT) | DMA_CTRL_DMAR_EN | |
| DMA_CTRL_DMAW_EN; |
| value |= (u32) hw->dma_ord; |
| if (atl1_rcb_128 == hw->rcb_value) |
| value |= DMA_CTRL_RCB_VALUE; |
| iowrite32(value, hw->hw_addr + REG_DMA_CTRL); |
| |
| /* config CMB / SMB */ |
| value = (hw->cmb_tpd > adapter->tpd_ring.count) ? |
| hw->cmb_tpd : adapter->tpd_ring.count; |
| value <<= 16; |
| value |= hw->cmb_rrd; |
| iowrite32(value, hw->hw_addr + REG_CMB_WRITE_TH); |
| value = hw->cmb_rx_timer | ((u32) hw->cmb_tx_timer << 16); |
| iowrite32(value, hw->hw_addr + REG_CMB_WRITE_TIMER); |
| iowrite32(hw->smb_timer, hw->hw_addr + REG_SMB_TIMER); |
| |
| /* --- enable CMB / SMB */ |
| value = CSMB_CTRL_CMB_EN | CSMB_CTRL_SMB_EN; |
| iowrite32(value, hw->hw_addr + REG_CSMB_CTRL); |
| |
| value = ioread32(adapter->hw.hw_addr + REG_ISR); |
| if (unlikely((value & ISR_PHY_LINKDOWN) != 0)) |
| value = 1; /* config failed */ |
| else |
| value = 0; |
| |
| /* clear all interrupt status */ |
| iowrite32(0x3fffffff, adapter->hw.hw_addr + REG_ISR); |
| iowrite32(0, adapter->hw.hw_addr + REG_ISR); |
| return value; |
| } |
| |
| /* |
| * atl1_pcie_patch - Patch for PCIE module |
| */ |
| static void atl1_pcie_patch(struct atl1_adapter *adapter) |
| { |
| u32 value; |
| |
| /* much vendor magic here */ |
| value = 0x6500; |
| iowrite32(value, adapter->hw.hw_addr + 0x12FC); |
| /* pcie flow control mode change */ |
| value = ioread32(adapter->hw.hw_addr + 0x1008); |
| value |= 0x8000; |
| iowrite32(value, adapter->hw.hw_addr + 0x1008); |
| } |
| |
| /* |
| * When ACPI resume on some VIA MotherBoard, the Interrupt Disable bit/0x400 |
| * on PCI Command register is disable. |
| * The function enable this bit. |
| * Brackett, 2006/03/15 |
| */ |
| static void atl1_via_workaround(struct atl1_adapter *adapter) |
| { |
| unsigned long value; |
| |
| value = ioread16(adapter->hw.hw_addr + PCI_COMMAND); |
| if (value & PCI_COMMAND_INTX_DISABLE) |
| value &= ~PCI_COMMAND_INTX_DISABLE; |
| iowrite32(value, adapter->hw.hw_addr + PCI_COMMAND); |
| } |
| |
| static void atl1_inc_smb(struct atl1_adapter *adapter) |
| { |
| struct net_device *netdev = adapter->netdev; |
| struct stats_msg_block *smb = adapter->smb.smb; |
| |
| /* Fill out the OS statistics structure */ |
| adapter->soft_stats.rx_packets += smb->rx_ok; |
| adapter->soft_stats.tx_packets += smb->tx_ok; |
| adapter->soft_stats.rx_bytes += smb->rx_byte_cnt; |
| adapter->soft_stats.tx_bytes += smb->tx_byte_cnt; |
| adapter->soft_stats.multicast += smb->rx_mcast; |
| adapter->soft_stats.collisions += (smb->tx_1_col + smb->tx_2_col * 2 + |
| smb->tx_late_col + smb->tx_abort_col * adapter->hw.max_retry); |
| |
| /* Rx Errors */ |
| adapter->soft_stats.rx_errors += (smb->rx_frag + smb->rx_fcs_err + |
| smb->rx_len_err + smb->rx_sz_ov + smb->rx_rxf_ov + |
| smb->rx_rrd_ov + smb->rx_align_err); |
| adapter->soft_stats.rx_fifo_errors += smb->rx_rxf_ov; |
| adapter->soft_stats.rx_length_errors += smb->rx_len_err; |
| adapter->soft_stats.rx_crc_errors += smb->rx_fcs_err; |
| adapter->soft_stats.rx_frame_errors += smb->rx_align_err; |
| adapter->soft_stats.rx_missed_errors += (smb->rx_rrd_ov + |
| smb->rx_rxf_ov); |
| |
| adapter->soft_stats.rx_pause += smb->rx_pause; |
| adapter->soft_stats.rx_rrd_ov += smb->rx_rrd_ov; |
| adapter->soft_stats.rx_trunc += smb->rx_sz_ov; |
| |
| /* Tx Errors */ |
| adapter->soft_stats.tx_errors += (smb->tx_late_col + |
| smb->tx_abort_col + smb->tx_underrun + smb->tx_trunc); |
| adapter->soft_stats.tx_fifo_errors += smb->tx_underrun; |
| adapter->soft_stats.tx_aborted_errors += smb->tx_abort_col; |
| adapter->soft_stats.tx_window_errors += smb->tx_late_col; |
| |
| adapter->soft_stats.excecol += smb->tx_abort_col; |
| adapter->soft_stats.deffer += smb->tx_defer; |
| adapter->soft_stats.scc += smb->tx_1_col; |
| adapter->soft_stats.mcc += smb->tx_2_col; |
| adapter->soft_stats.latecol += smb->tx_late_col; |
| adapter->soft_stats.tx_underun += smb->tx_underrun; |
| adapter->soft_stats.tx_trunc += smb->tx_trunc; |
| adapter->soft_stats.tx_pause += smb->tx_pause; |
| |
| netdev->stats.rx_packets = adapter->soft_stats.rx_packets; |
| netdev->stats.tx_packets = adapter->soft_stats.tx_packets; |
| netdev->stats.rx_bytes = adapter->soft_stats.rx_bytes; |
| netdev->stats.tx_bytes = adapter->soft_stats.tx_bytes; |
| netdev->stats.multicast = adapter->soft_stats.multicast; |
| netdev->stats.collisions = adapter->soft_stats.collisions; |
| netdev->stats.rx_errors = adapter->soft_stats.rx_errors; |
| netdev->stats.rx_over_errors = |
| adapter->soft_stats.rx_missed_errors; |
| netdev->stats.rx_length_errors = |
| adapter->soft_stats.rx_length_errors; |
| netdev->stats.rx_crc_errors = adapter->soft_stats.rx_crc_errors; |
| netdev->stats.rx_frame_errors = |
| adapter->soft_stats.rx_frame_errors; |
| netdev->stats.rx_fifo_errors = adapter->soft_stats.rx_fifo_errors; |
| netdev->stats.rx_missed_errors = |
| adapter->soft_stats.rx_missed_errors; |
| netdev->stats.tx_errors = adapter->soft_stats.tx_errors; |
| netdev->stats.tx_fifo_errors = adapter->soft_stats.tx_fifo_errors; |
| netdev->stats.tx_aborted_errors = |
| adapter->soft_stats.tx_aborted_errors; |
| netdev->stats.tx_window_errors = |
| adapter->soft_stats.tx_window_errors; |
| netdev->stats.tx_carrier_errors = |
| adapter->soft_stats.tx_carrier_errors; |
| } |
| |
| static void atl1_update_mailbox(struct atl1_adapter *adapter) |
| { |
| unsigned long flags; |
| u32 tpd_next_to_use; |
| u32 rfd_next_to_use; |
| u32 rrd_next_to_clean; |
| u32 value; |
| |
| spin_lock_irqsave(&adapter->mb_lock, flags); |
| |
| tpd_next_to_use = atomic_read(&adapter->tpd_ring.next_to_use); |
| rfd_next_to_use = atomic_read(&adapter->rfd_ring.next_to_use); |
| rrd_next_to_clean = atomic_read(&adapter->rrd_ring.next_to_clean); |
| |
| value = ((rfd_next_to_use & MB_RFD_PROD_INDX_MASK) << |
| MB_RFD_PROD_INDX_SHIFT) | |
| ((rrd_next_to_clean & MB_RRD_CONS_INDX_MASK) << |
| MB_RRD_CONS_INDX_SHIFT) | |
| ((tpd_next_to_use & MB_TPD_PROD_INDX_MASK) << |
| MB_TPD_PROD_INDX_SHIFT); |
| iowrite32(value, adapter->hw.hw_addr + REG_MAILBOX); |
| |
| spin_unlock_irqrestore(&adapter->mb_lock, flags); |
| } |
| |
| static void atl1_clean_alloc_flag(struct atl1_adapter *adapter, |
| struct rx_return_desc *rrd, u16 offset) |
| { |
| struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring; |
| |
| while (rfd_ring->next_to_clean != (rrd->buf_indx + offset)) { |
| rfd_ring->buffer_info[rfd_ring->next_to_clean].alloced = 0; |
| if (++rfd_ring->next_to_clean == rfd_ring->count) { |
| rfd_ring->next_to_clean = 0; |
| } |
| } |
| } |
| |
| static void atl1_update_rfd_index(struct atl1_adapter *adapter, |
| struct rx_return_desc *rrd) |
| { |
| u16 num_buf; |
| |
| num_buf = (rrd->xsz.xsum_sz.pkt_size + adapter->rx_buffer_len - 1) / |
| adapter->rx_buffer_len; |
| if (rrd->num_buf == num_buf) |
| /* clean alloc flag for bad rrd */ |
| atl1_clean_alloc_flag(adapter, rrd, num_buf); |
| } |
| |
| static void atl1_rx_checksum(struct atl1_adapter *adapter, |
| struct rx_return_desc *rrd, struct sk_buff *skb) |
| { |
| struct pci_dev *pdev = adapter->pdev; |
| |
| /* |
| * The L1 hardware contains a bug that erroneously sets the |
| * PACKET_FLAG_ERR and ERR_FLAG_L4_CHKSUM bits whenever a |
| * fragmented IP packet is received, even though the packet |
| * is perfectly valid and its checksum is correct. There's |
| * no way to distinguish between one of these good packets |
| * and a packet that actually contains a TCP/UDP checksum |
| * error, so all we can do is allow it to be handed up to |
| * the higher layers and let it be sorted out there. |
| */ |
| |
| skb_checksum_none_assert(skb); |
| |
| if (unlikely(rrd->pkt_flg & PACKET_FLAG_ERR)) { |
| if (rrd->err_flg & (ERR_FLAG_CRC | ERR_FLAG_TRUNC | |
| ERR_FLAG_CODE | ERR_FLAG_OV)) { |
| adapter->hw_csum_err++; |
| if (netif_msg_rx_err(adapter)) |
| dev_printk(KERN_DEBUG, &pdev->dev, |
| "rx checksum error\n"); |
| return; |
| } |
| } |
| |
| /* not IPv4 */ |
| if (!(rrd->pkt_flg & PACKET_FLAG_IPV4)) |
| /* checksum is invalid, but it's not an IPv4 pkt, so ok */ |
| return; |
| |
| /* IPv4 packet */ |
| if (likely(!(rrd->err_flg & |
| (ERR_FLAG_IP_CHKSUM | ERR_FLAG_L4_CHKSUM)))) { |
| skb->ip_summed = CHECKSUM_UNNECESSARY; |
| adapter->hw_csum_good++; |
| return; |
| } |
| } |
| |
| /** |
| * atl1_alloc_rx_buffers - Replace used receive buffers |
| * @adapter: address of board private structure |
| */ |
| static u16 atl1_alloc_rx_buffers(struct atl1_adapter *adapter) |
| { |
| struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring; |
| struct pci_dev *pdev = adapter->pdev; |
| struct page *page; |
| unsigned long offset; |
| struct atl1_buffer *buffer_info, *next_info; |
| struct sk_buff *skb; |
| u16 num_alloc = 0; |
| u16 rfd_next_to_use, next_next; |
| struct rx_free_desc *rfd_desc; |
| |
| next_next = rfd_next_to_use = atomic_read(&rfd_ring->next_to_use); |
| if (++next_next == rfd_ring->count) |
| next_next = 0; |
| buffer_info = &rfd_ring->buffer_info[rfd_next_to_use]; |
| next_info = &rfd_ring->buffer_info[next_next]; |
| |
| while (!buffer_info->alloced && !next_info->alloced) { |
| if (buffer_info->skb) { |
| buffer_info->alloced = 1; |
| goto next; |
| } |
| |
| rfd_desc = ATL1_RFD_DESC(rfd_ring, rfd_next_to_use); |
| |
| skb = netdev_alloc_skb_ip_align(adapter->netdev, |
| adapter->rx_buffer_len); |
| if (unlikely(!skb)) { |
| /* Better luck next round */ |
| adapter->netdev->stats.rx_dropped++; |
| break; |
| } |
| |
| buffer_info->alloced = 1; |
| buffer_info->skb = skb; |
| buffer_info->length = (u16) adapter->rx_buffer_len; |
| page = virt_to_page(skb->data); |
| offset = (unsigned long)skb->data & ~PAGE_MASK; |
| buffer_info->dma = pci_map_page(pdev, page, offset, |
| adapter->rx_buffer_len, |
| PCI_DMA_FROMDEVICE); |
| rfd_desc->buffer_addr = cpu_to_le64(buffer_info->dma); |
| rfd_desc->buf_len = cpu_to_le16(adapter->rx_buffer_len); |
| rfd_desc->coalese = 0; |
| |
| next: |
| rfd_next_to_use = next_next; |
| if (unlikely(++next_next == rfd_ring->count)) |
| next_next = 0; |
| |
| buffer_info = &rfd_ring->buffer_info[rfd_next_to_use]; |
| next_info = &rfd_ring->buffer_info[next_next]; |
| num_alloc++; |
| } |
| |
| if (num_alloc) { |
| /* |
| * Force memory writes to complete before letting h/w |
| * know there are new descriptors to fetch. (Only |
| * applicable for weak-ordered memory model archs, |
| * such as IA-64). |
| */ |
| wmb(); |
| atomic_set(&rfd_ring->next_to_use, (int)rfd_next_to_use); |
| } |
| return num_alloc; |
| } |
| |
| static int atl1_intr_rx(struct atl1_adapter *adapter, int budget) |
| { |
| int i, count; |
| u16 length; |
| u16 rrd_next_to_clean; |
| u32 value; |
| struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring; |
| struct atl1_rrd_ring *rrd_ring = &adapter->rrd_ring; |
| struct atl1_buffer *buffer_info; |
| struct rx_return_desc *rrd; |
| struct sk_buff *skb; |
| |
| count = 0; |
| |
| rrd_next_to_clean = atomic_read(&rrd_ring->next_to_clean); |
| |
| while (count < budget) { |
| rrd = ATL1_RRD_DESC(rrd_ring, rrd_next_to_clean); |
| i = 1; |
| if (likely(rrd->xsz.valid)) { /* packet valid */ |
| chk_rrd: |
| /* check rrd status */ |
| if (likely(rrd->num_buf == 1)) |
| goto rrd_ok; |
| else if (netif_msg_rx_err(adapter)) { |
| dev_printk(KERN_DEBUG, &adapter->pdev->dev, |
| "unexpected RRD buffer count\n"); |
| dev_printk(KERN_DEBUG, &adapter->pdev->dev, |
| "rx_buf_len = %d\n", |
| adapter->rx_buffer_len); |
| dev_printk(KERN_DEBUG, &adapter->pdev->dev, |
| "RRD num_buf = %d\n", |
| rrd->num_buf); |
| dev_printk(KERN_DEBUG, &adapter->pdev->dev, |
| "RRD pkt_len = %d\n", |
| rrd->xsz.xsum_sz.pkt_size); |
| dev_printk(KERN_DEBUG, &adapter->pdev->dev, |
| "RRD pkt_flg = 0x%08X\n", |
| rrd->pkt_flg); |
| dev_printk(KERN_DEBUG, &adapter->pdev->dev, |
| "RRD err_flg = 0x%08X\n", |
| rrd->err_flg); |
| dev_printk(KERN_DEBUG, &adapter->pdev->dev, |
| "RRD vlan_tag = 0x%08X\n", |
| rrd->vlan_tag); |
| } |
| |
| /* rrd seems to be bad */ |
| if (unlikely(i-- > 0)) { |
| /* rrd may not be DMAed completely */ |
| udelay(1); |
| goto chk_rrd; |
| } |
| /* bad rrd */ |
| if (netif_msg_rx_err(adapter)) |
| dev_printk(KERN_DEBUG, &adapter->pdev->dev, |
| "bad RRD\n"); |
| /* see if update RFD index */ |
| if (rrd->num_buf > 1) |
| atl1_update_rfd_index(adapter, rrd); |
| |
| /* update rrd */ |
| rrd->xsz.valid = 0; |
| if (++rrd_next_to_clean == rrd_ring->count) |
| rrd_next_to_clean = 0; |
| count++; |
| continue; |
| } else { /* current rrd still not be updated */ |
| |
| break; |
| } |
| rrd_ok: |
| /* clean alloc flag for bad rrd */ |
| atl1_clean_alloc_flag(adapter, rrd, 0); |
| |
| buffer_info = &rfd_ring->buffer_info[rrd->buf_indx]; |
| if (++rfd_ring->next_to_clean == rfd_ring->count) |
| rfd_ring->next_to_clean = 0; |
| |
| /* update rrd next to clean */ |
| if (++rrd_next_to_clean == rrd_ring->count) |
| rrd_next_to_clean = 0; |
| count++; |
| |
| if (unlikely(rrd->pkt_flg & PACKET_FLAG_ERR)) { |
| if (!(rrd->err_flg & |
| (ERR_FLAG_IP_CHKSUM | ERR_FLAG_L4_CHKSUM |
| | ERR_FLAG_LEN))) { |
| /* packet error, don't need upstream */ |
| buffer_info->alloced = 0; |
| rrd->xsz.valid = 0; |
| continue; |
| } |
| } |
| |
| /* Good Receive */ |
| pci_unmap_page(adapter->pdev, buffer_info->dma, |
| buffer_info->length, PCI_DMA_FROMDEVICE); |
| buffer_info->dma = 0; |
| skb = buffer_info->skb; |
| length = le16_to_cpu(rrd->xsz.xsum_sz.pkt_size); |
| |
| skb_put(skb, length - ETH_FCS_LEN); |
| |
| /* Receive Checksum Offload */ |
| atl1_rx_checksum(adapter, rrd, skb); |
| skb->protocol = eth_type_trans(skb, adapter->netdev); |
| |
| if (rrd->pkt_flg & PACKET_FLAG_VLAN_INS) { |
| u16 vlan_tag = (rrd->vlan_tag >> 4) | |
| ((rrd->vlan_tag & 7) << 13) | |
| ((rrd->vlan_tag & 8) << 9); |
| |
| __vlan_hwaccel_put_tag(skb, vlan_tag); |
| } |
| netif_receive_skb(skb); |
| |
| /* let protocol layer free skb */ |
| buffer_info->skb = NULL; |
| buffer_info->alloced = 0; |
| rrd->xsz.valid = 0; |
| } |
| |
| atomic_set(&rrd_ring->next_to_clean, rrd_next_to_clean); |
| |
| atl1_alloc_rx_buffers(adapter); |
| |
| /* update mailbox ? */ |
| if (count) { |
| u32 tpd_next_to_use; |
| u32 rfd_next_to_use; |
| |
| spin_lock(&adapter->mb_lock); |
| |
| tpd_next_to_use = atomic_read(&adapter->tpd_ring.next_to_use); |
| rfd_next_to_use = |
| atomic_read(&adapter->rfd_ring.next_to_use); |
| rrd_next_to_clean = |
| atomic_read(&adapter->rrd_ring.next_to_clean); |
| value = ((rfd_next_to_use & MB_RFD_PROD_INDX_MASK) << |
| MB_RFD_PROD_INDX_SHIFT) | |
| ((rrd_next_to_clean & MB_RRD_CONS_INDX_MASK) << |
| MB_RRD_CONS_INDX_SHIFT) | |
| ((tpd_next_to_use & MB_TPD_PROD_INDX_MASK) << |
| MB_TPD_PROD_INDX_SHIFT); |
| iowrite32(value, adapter->hw.hw_addr + REG_MAILBOX); |
| spin_unlock(&adapter->mb_lock); |
| } |
| |
| return count; |
| } |
| |
| static int atl1_intr_tx(struct atl1_adapter *adapter) |
| { |
| struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring; |
| struct atl1_buffer *buffer_info; |
| u16 sw_tpd_next_to_clean; |
| u16 cmb_tpd_next_to_clean; |
| int count = 0; |
| |
| sw_tpd_next_to_clean = atomic_read(&tpd_ring->next_to_clean); |
| cmb_tpd_next_to_clean = le16_to_cpu(adapter->cmb.cmb->tpd_cons_idx); |
| |
| while (cmb_tpd_next_to_clean != sw_tpd_next_to_clean) { |
| buffer_info = &tpd_ring->buffer_info[sw_tpd_next_to_clean]; |
| if (buffer_info->dma) { |
| pci_unmap_page(adapter->pdev, buffer_info->dma, |
| buffer_info->length, PCI_DMA_TODEVICE); |
| buffer_info->dma = 0; |
| } |
| |
| if (buffer_info->skb) { |
| dev_kfree_skb_irq(buffer_info->skb); |
| buffer_info->skb = NULL; |
| } |
| |
| if (++sw_tpd_next_to_clean == tpd_ring->count) |
| sw_tpd_next_to_clean = 0; |
| |
| count++; |
| } |
| atomic_set(&tpd_ring->next_to_clean, sw_tpd_next_to_clean); |
| |
| if (netif_queue_stopped(adapter->netdev) && |
| netif_carrier_ok(adapter->netdev)) |
| netif_wake_queue(adapter->netdev); |
| |
| return count; |
| } |
| |
| static u16 atl1_tpd_avail(struct atl1_tpd_ring *tpd_ring) |
| { |
| u16 next_to_clean = atomic_read(&tpd_ring->next_to_clean); |
| u16 next_to_use = atomic_read(&tpd_ring->next_to_use); |
| return (next_to_clean > next_to_use) ? |
| next_to_clean - next_to_use - 1 : |
| tpd_ring->count + next_to_clean - next_to_use - 1; |
| } |
| |
| static int atl1_tso(struct atl1_adapter *adapter, struct sk_buff *skb, |
| struct tx_packet_desc *ptpd) |
| { |
| u8 hdr_len, ip_off; |
| u32 real_len; |
| int err; |
| |
| if (skb_shinfo(skb)->gso_size) { |
| if (skb_header_cloned(skb)) { |
| err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC); |
| if (unlikely(err)) |
| return -1; |
| } |
| |
| if (skb->protocol == htons(ETH_P_IP)) { |
| struct iphdr *iph = ip_hdr(skb); |
| |
| real_len = (((unsigned char *)iph - skb->data) + |
| ntohs(iph->tot_len)); |
| if (real_len < skb->len) |
| pskb_trim(skb, real_len); |
| hdr_len = (skb_transport_offset(skb) + tcp_hdrlen(skb)); |
| if (skb->len == hdr_len) { |
| iph->check = 0; |
| tcp_hdr(skb)->check = |
| ~csum_tcpudp_magic(iph->saddr, |
| iph->daddr, tcp_hdrlen(skb), |
| IPPROTO_TCP, 0); |
| ptpd->word3 |= (iph->ihl & TPD_IPHL_MASK) << |
| TPD_IPHL_SHIFT; |
| ptpd->word3 |= ((tcp_hdrlen(skb) >> 2) & |
| TPD_TCPHDRLEN_MASK) << |
| TPD_TCPHDRLEN_SHIFT; |
| ptpd->word3 |= 1 << TPD_IP_CSUM_SHIFT; |
| ptpd->word3 |= 1 << TPD_TCP_CSUM_SHIFT; |
| return 1; |
| } |
| |
| iph->check = 0; |
| tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr, |
| iph->daddr, 0, IPPROTO_TCP, 0); |
| ip_off = (unsigned char *)iph - |
| (unsigned char *) skb_network_header(skb); |
| if (ip_off == 8) /* 802.3-SNAP frame */ |
| ptpd->word3 |= 1 << TPD_ETHTYPE_SHIFT; |
| else if (ip_off != 0) |
| return -2; |
| |
| ptpd->word3 |= (iph->ihl & TPD_IPHL_MASK) << |
| TPD_IPHL_SHIFT; |
| ptpd->word3 |= ((tcp_hdrlen(skb) >> 2) & |
| TPD_TCPHDRLEN_MASK) << TPD_TCPHDRLEN_SHIFT; |
| ptpd->word3 |= (skb_shinfo(skb)->gso_size & |
| TPD_MSS_MASK) << TPD_MSS_SHIFT; |
| ptpd->word3 |= 1 << TPD_SEGMENT_EN_SHIFT; |
| return 3; |
| } |
| } |
| return false; |
| } |
| |
| static int atl1_tx_csum(struct atl1_adapter *adapter, struct sk_buff *skb, |
| struct tx_packet_desc *ptpd) |
| { |
| u8 css, cso; |
| |
| if (likely(skb->ip_summed == CHECKSUM_PARTIAL)) { |
| css = skb_checksum_start_offset(skb); |
| cso = css + (u8) skb->csum_offset; |
| if (unlikely(css & 0x1)) { |
| /* L1 hardware requires an even number here */ |
| if (netif_msg_tx_err(adapter)) |
| dev_printk(KERN_DEBUG, &adapter->pdev->dev, |
| "payload offset not an even number\n"); |
| return -1; |
| } |
| ptpd->word3 |= (css & TPD_PLOADOFFSET_MASK) << |
| TPD_PLOADOFFSET_SHIFT; |
| ptpd->word3 |= (cso & TPD_CCSUMOFFSET_MASK) << |
| TPD_CCSUMOFFSET_SHIFT; |
| ptpd->word3 |= 1 << TPD_CUST_CSUM_EN_SHIFT; |
| return true; |
| } |
| return 0; |
| } |
| |
| static void atl1_tx_map(struct atl1_adapter *adapter, struct sk_buff *skb, |
| struct tx_packet_desc *ptpd) |
| { |
| struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring; |
| struct atl1_buffer *buffer_info; |
| u16 buf_len = skb->len; |
| struct page *page; |
| unsigned long offset; |
| unsigned int nr_frags; |
| unsigned int f; |
| int retval; |
| u16 next_to_use; |
| u16 data_len; |
| u8 hdr_len; |
| |
| buf_len -= skb->data_len; |
| nr_frags = skb_shinfo(skb)->nr_frags; |
| next_to_use = atomic_read(&tpd_ring->next_to_use); |
| buffer_info = &tpd_ring->buffer_info[next_to_use]; |
| BUG_ON(buffer_info->skb); |
| /* put skb in last TPD */ |
| buffer_info->skb = NULL; |
| |
| retval = (ptpd->word3 >> TPD_SEGMENT_EN_SHIFT) & TPD_SEGMENT_EN_MASK; |
| if (retval) { |
| /* TSO */ |
| hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb); |
| buffer_info->length = hdr_len; |
| page = virt_to_page(skb->data); |
| offset = (unsigned long)skb->data & ~PAGE_MASK; |
| buffer_info->dma = pci_map_page(adapter->pdev, page, |
| offset, hdr_len, |
| PCI_DMA_TODEVICE); |
| |
| if (++next_to_use == tpd_ring->count) |
| next_to_use = 0; |
| |
| if (buf_len > hdr_len) { |
| int i, nseg; |
| |
| data_len = buf_len - hdr_len; |
| nseg = (data_len + ATL1_MAX_TX_BUF_LEN - 1) / |
| ATL1_MAX_TX_BUF_LEN; |
| for (i = 0; i < nseg; i++) { |
| buffer_info = |
| &tpd_ring->buffer_info[next_to_use]; |
| buffer_info->skb = NULL; |
| buffer_info->length = |
| (ATL1_MAX_TX_BUF_LEN >= |
| data_len) ? ATL1_MAX_TX_BUF_LEN : data_len; |
| data_len -= buffer_info->length; |
| page = virt_to_page(skb->data + |
| (hdr_len + i * ATL1_MAX_TX_BUF_LEN)); |
| offset = (unsigned long)(skb->data + |
| (hdr_len + i * ATL1_MAX_TX_BUF_LEN)) & |
| ~PAGE_MASK; |
| buffer_info->dma = pci_map_page(adapter->pdev, |
| page, offset, buffer_info->length, |
| PCI_DMA_TODEVICE); |
| if (++next_to_use == tpd_ring->count) |
| next_to_use = 0; |
| } |
| } |
| } else { |
| /* not TSO */ |
| buffer_info->length = buf_len; |
| page = virt_to_page(skb->data); |
| offset = (unsigned long)skb->data & ~PAGE_MASK; |
| buffer_info->dma = pci_map_page(adapter->pdev, page, |
| offset, buf_len, PCI_DMA_TODEVICE); |
| if (++next_to_use == tpd_ring->count) |
| next_to_use = 0; |
| } |
| |
| for (f = 0; f < nr_frags; f++) { |
| const struct skb_frag_struct *frag; |
| u16 i, nseg; |
| |
| frag = &skb_shinfo(skb)->frags[f]; |
| buf_len = skb_frag_size(frag); |
| |
| nseg = (buf_len + ATL1_MAX_TX_BUF_LEN - 1) / |
| ATL1_MAX_TX_BUF_LEN; |
| for (i = 0; i < nseg; i++) { |
| buffer_info = &tpd_ring->buffer_info[next_to_use]; |
| BUG_ON(buffer_info->skb); |
| |
| buffer_info->skb = NULL; |
| buffer_info->length = (buf_len > ATL1_MAX_TX_BUF_LEN) ? |
| ATL1_MAX_TX_BUF_LEN : buf_len; |
| buf_len -= buffer_info->length; |
| buffer_info->dma = skb_frag_dma_map(&adapter->pdev->dev, |
| frag, i * ATL1_MAX_TX_BUF_LEN, |
| buffer_info->length, DMA_TO_DEVICE); |
| |
| if (++next_to_use == tpd_ring->count) |
| next_to_use = 0; |
| } |
| } |
| |
| /* last tpd's buffer-info */ |
| buffer_info->skb = skb; |
| } |
| |
| static void atl1_tx_queue(struct atl1_adapter *adapter, u16 count, |
| struct tx_packet_desc *ptpd) |
| { |
| struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring; |
| struct atl1_buffer *buffer_info; |
| struct tx_packet_desc *tpd; |
| u16 j; |
| u32 val; |
| u16 next_to_use = (u16) atomic_read(&tpd_ring->next_to_use); |
| |
| for (j = 0; j < count; j++) { |
| buffer_info = &tpd_ring->buffer_info[next_to_use]; |
| tpd = ATL1_TPD_DESC(&adapter->tpd_ring, next_to_use); |
| if (tpd != ptpd) |
| memcpy(tpd, ptpd, sizeof(struct tx_packet_desc)); |
| tpd->buffer_addr = cpu_to_le64(buffer_info->dma); |
| tpd->word2 &= ~(TPD_BUFLEN_MASK << TPD_BUFLEN_SHIFT); |
| tpd->word2 |= (cpu_to_le16(buffer_info->length) & |
| TPD_BUFLEN_MASK) << TPD_BUFLEN_SHIFT; |
| |
| /* |
| * if this is the first packet in a TSO chain, set |
| * TPD_HDRFLAG, otherwise, clear it. |
| */ |
| val = (tpd->word3 >> TPD_SEGMENT_EN_SHIFT) & |
| TPD_SEGMENT_EN_MASK; |
| if (val) { |
| if (!j) |
| tpd->word3 |= 1 << TPD_HDRFLAG_SHIFT; |
| else |
| tpd->word3 &= ~(1 << TPD_HDRFLAG_SHIFT); |
| } |
| |
| if (j == (count - 1)) |
| tpd->word3 |= 1 << TPD_EOP_SHIFT; |
| |
| if (++next_to_use == tpd_ring->count) |
| next_to_use = 0; |
| } |
| /* |
| * Force memory writes to complete before letting h/w |
| * know there are new descriptors to fetch. (Only |
| * applicable for weak-ordered memory model archs, |
| * such as IA-64). |
| */ |
| wmb(); |
| |
| atomic_set(&tpd_ring->next_to_use, next_to_use); |
| } |
| |
| static netdev_tx_t atl1_xmit_frame(struct sk_buff *skb, |
| struct net_device *netdev) |
| { |
| struct atl1_adapter *adapter = netdev_priv(netdev); |
| struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring; |
| int len; |
| int tso; |
| int count = 1; |
| int ret_val; |
| struct tx_packet_desc *ptpd; |
| u16 vlan_tag; |
| unsigned int nr_frags = 0; |
| unsigned int mss = 0; |
| unsigned int f; |
| unsigned int proto_hdr_len; |
| |
| len = skb_headlen(skb); |
| |
| if (unlikely(skb->len <= 0)) { |
| dev_kfree_skb_any(skb); |
| return NETDEV_TX_OK; |
| } |
| |
| nr_frags = skb_shinfo(skb)->nr_frags; |
| for (f = 0; f < nr_frags; f++) { |
| unsigned int f_size = skb_frag_size(&skb_shinfo(skb)->frags[f]); |
| count += (f_size + ATL1_MAX_TX_BUF_LEN - 1) / |
| ATL1_MAX_TX_BUF_LEN; |
| } |
| |
| mss = skb_shinfo(skb)->gso_size; |
| if (mss) { |
| if (skb->protocol == htons(ETH_P_IP)) { |
| proto_hdr_len = (skb_transport_offset(skb) + |
| tcp_hdrlen(skb)); |
| if (unlikely(proto_hdr_len > len)) { |
| dev_kfree_skb_any(skb); |
| return NETDEV_TX_OK; |
| } |
| /* need additional TPD ? */ |
| if (proto_hdr_len != len) |
| count += (len - proto_hdr_len + |
| ATL1_MAX_TX_BUF_LEN - 1) / |
| ATL1_MAX_TX_BUF_LEN; |
| } |
| } |
| |
| if (atl1_tpd_avail(&adapter->tpd_ring) < count) { |
| /* not enough descriptors */ |
| netif_stop_queue(netdev); |
| if (netif_msg_tx_queued(adapter)) |
| dev_printk(KERN_DEBUG, &adapter->pdev->dev, |
| "tx busy\n"); |
| return NETDEV_TX_BUSY; |
| } |
| |
| ptpd = ATL1_TPD_DESC(tpd_ring, |
| (u16) atomic_read(&tpd_ring->next_to_use)); |
| memset(ptpd, 0, sizeof(struct tx_packet_desc)); |
| |
| if (vlan_tx_tag_present(skb)) { |
| vlan_tag = vlan_tx_tag_get(skb); |
| vlan_tag = (vlan_tag << 4) | (vlan_tag >> 13) | |
| ((vlan_tag >> 9) & 0x8); |
| ptpd->word3 |= 1 << TPD_INS_VL_TAG_SHIFT; |
| ptpd->word2 |= (vlan_tag & TPD_VLANTAG_MASK) << |
| TPD_VLANTAG_SHIFT; |
| } |
| |
| tso = atl1_tso(adapter, skb, ptpd); |
| if (tso < 0) { |
| dev_kfree_skb_any(skb); |
| return NETDEV_TX_OK; |
| } |
| |
| if (!tso) { |
| ret_val = atl1_tx_csum(adapter, skb, ptpd); |
| if (ret_val < 0) { |
| dev_kfree_skb_any(skb); |
| return NETDEV_TX_OK; |
| } |
| } |
| |
| atl1_tx_map(adapter, skb, ptpd); |
| atl1_tx_queue(adapter, count, ptpd); |
| atl1_update_mailbox(adapter); |
| mmiowb(); |
| return NETDEV_TX_OK; |
| } |
| |
| static int atl1_rings_clean(struct napi_struct *napi, int budget) |
| { |
| struct atl1_adapter *adapter = container_of(napi, struct atl1_adapter, napi); |
| int work_done = atl1_intr_rx(adapter, budget); |
| |
| if (atl1_intr_tx(adapter)) |
| work_done = budget; |
| |
| /* Let's come again to process some more packets */ |
| if (work_done >= budget) |
| return work_done; |
| |
| napi_complete(napi); |
| /* re-enable Interrupt */ |
| if (likely(adapter->int_enabled)) |
| atlx_imr_set(adapter, IMR_NORMAL_MASK); |
| return work_done; |
| } |
| |
| static inline int atl1_sched_rings_clean(struct atl1_adapter* adapter) |
| { |
| if (!napi_schedule_prep(&adapter->napi)) |
| /* It is possible in case even the RX/TX ints are disabled via IMR |
| * register the ISR bits are set anyway (but do not produce IRQ). |
| * To handle such situation the napi functions used to check is |
| * something scheduled or not. |
| */ |
| return 0; |
| |
| __napi_schedule(&adapter->napi); |
| |
| /* |
| * Disable RX/TX ints via IMR register if it is |
| * allowed. NAPI handler must reenable them in same |
| * way. |
| */ |
| if (!adapter->int_enabled) |
| return 1; |
| |
| atlx_imr_set(adapter, IMR_NORXTX_MASK); |
| return 1; |
| } |
| |
| /** |
| * atl1_intr - Interrupt Handler |
| * @irq: interrupt number |
| * @data: pointer to a network interface device structure |
| */ |
| static irqreturn_t atl1_intr(int irq, void *data) |
| { |
| struct atl1_adapter *adapter = netdev_priv(data); |
| u32 status; |
| |
| status = adapter->cmb.cmb->int_stats; |
| if (!status) |
| return IRQ_NONE; |
| |
| /* clear CMB interrupt status at once, |
| * but leave rx/tx interrupt status in case it should be dropped |
| * only if rx/tx processing queued. In other case interrupt |
| * can be lost. |
| */ |
| adapter->cmb.cmb->int_stats = status & (ISR_CMB_TX | ISR_CMB_RX); |
| |
| if (status & ISR_GPHY) /* clear phy status */ |
| atlx_clear_phy_int(adapter); |
| |
| /* clear ISR status, and Enable CMB DMA/Disable Interrupt */ |
| iowrite32(status | ISR_DIS_INT, adapter->hw.hw_addr + REG_ISR); |
| |
| /* check if SMB intr */ |
| if (status & ISR_SMB) |
| atl1_inc_smb(adapter); |
| |
| /* check if PCIE PHY Link down */ |
| if (status & ISR_PHY_LINKDOWN) { |
| if (netif_msg_intr(adapter)) |
| dev_printk(KERN_DEBUG, &adapter->pdev->dev, |
| "pcie phy link down %x\n", status); |
| if (netif_running(adapter->netdev)) { /* reset MAC */ |
| atlx_irq_disable(adapter); |
| schedule_work(&adapter->reset_dev_task); |
| return IRQ_HANDLED; |
| } |
| } |
| |
| /* check if DMA read/write error ? */ |
| if (status & (ISR_DMAR_TO_RST | ISR_DMAW_TO_RST)) { |
| if (netif_msg_intr(adapter)) |
| dev_printk(KERN_DEBUG, &adapter->pdev->dev, |
| "pcie DMA r/w error (status = 0x%x)\n", |
| status); |
| atlx_irq_disable(adapter); |
| schedule_work(&adapter->reset_dev_task); |
| return IRQ_HANDLED; |
| } |
| |
| /* link event */ |
| if (status & ISR_GPHY) { |
| adapter->soft_stats.tx_carrier_errors++; |
| atl1_check_for_link(adapter); |
| } |
| |
| /* transmit or receive event */ |
| if (status & (ISR_CMB_TX | ISR_CMB_RX) && |
| atl1_sched_rings_clean(adapter)) |
| adapter->cmb.cmb->int_stats = adapter->cmb.cmb->int_stats & |
| ~(ISR_CMB_TX | ISR_CMB_RX); |
| |
| /* rx exception */ |
| if (unlikely(status & (ISR_RXF_OV | ISR_RFD_UNRUN | |
| ISR_RRD_OV | ISR_HOST_RFD_UNRUN | |
| ISR_HOST_RRD_OV))) { |
| if (netif_msg_intr(adapter)) |
| dev_printk(KERN_DEBUG, |
| &adapter->pdev->dev, |
| "rx exception, ISR = 0x%x\n", |
| status); |
| atl1_sched_rings_clean(adapter); |
| } |
| |
| /* re-enable Interrupt */ |
| iowrite32(ISR_DIS_SMB | ISR_DIS_DMA, adapter->hw.hw_addr + REG_ISR); |
| return IRQ_HANDLED; |
| } |
| |
| |
| /** |
| * atl1_phy_config - Timer Call-back |
| * @data: pointer to netdev cast into an unsigned long |
| */ |
| static void atl1_phy_config(unsigned long data) |
| { |
| struct atl1_adapter *adapter = (struct atl1_adapter *)data; |
| struct atl1_hw *hw = &adapter->hw; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&adapter->lock, flags); |
| adapter->phy_timer_pending = false; |
| atl1_write_phy_reg(hw, MII_ADVERTISE, hw->mii_autoneg_adv_reg); |
| atl1_write_phy_reg(hw, MII_ATLX_CR, hw->mii_1000t_ctrl_reg); |
| atl1_write_phy_reg(hw, MII_BMCR, MII_CR_RESET | MII_CR_AUTO_NEG_EN); |
| spin_unlock_irqrestore(&adapter->lock, flags); |
| } |
| |
| /* |
| * Orphaned vendor comment left intact here: |
| * <vendor comment> |
| * If TPD Buffer size equal to 0, PCIE DMAR_TO_INT |
| * will assert. We do soft reset <0x1400=1> according |
| * with the SPEC. BUT, it seemes that PCIE or DMA |
| * state-machine will not be reset. DMAR_TO_INT will |
| * assert again and again. |
| * </vendor comment> |
| */ |
| |
| static int atl1_reset(struct atl1_adapter *adapter) |
| { |
| int ret; |
| ret = atl1_reset_hw(&adapter->hw); |
| if (ret) |
| return ret; |
| return atl1_init_hw(&adapter->hw); |
| } |
| |
| static s32 atl1_up(struct atl1_adapter *adapter) |
| { |
| struct net_device *netdev = adapter->netdev; |
| int err; |
| int irq_flags = 0; |
| |
| /* hardware has been reset, we need to reload some things */ |
| atlx_set_multi(netdev); |
| atl1_init_ring_ptrs(adapter); |
| atlx_restore_vlan(adapter); |
| err = atl1_alloc_rx_buffers(adapter); |
| if (unlikely(!err)) |
| /* no RX BUFFER allocated */ |
| return -ENOMEM; |
| |
| if (unlikely(atl1_configure(adapter))) { |
| err = -EIO; |
| goto err_up; |
| } |
| |
| err = pci_enable_msi(adapter->pdev); |
| if (err) { |
| if (netif_msg_ifup(adapter)) |
| dev_info(&adapter->pdev->dev, |
| "Unable to enable MSI: %d\n", err); |
| irq_flags |= IRQF_SHARED; |
| } |
| |
| err = request_irq(adapter->pdev->irq, atl1_intr, irq_flags, |
| netdev->name, netdev); |
| if (unlikely(err)) |
| goto err_up; |
| |
| napi_enable(&adapter->napi); |
| atlx_irq_enable(adapter); |
| atl1_check_link(adapter); |
| netif_start_queue(netdev); |
| return 0; |
| |
| err_up: |
| pci_disable_msi(adapter->pdev); |
| /* free rx_buffers */ |
| atl1_clean_rx_ring(adapter); |
| return err; |
| } |
| |
| static void atl1_down(struct atl1_adapter *adapter) |
| { |
| struct net_device *netdev = adapter->netdev; |
| |
| napi_disable(&adapter->napi); |
| netif_stop_queue(netdev); |
| del_timer_sync(&adapter->phy_config_timer); |
| adapter->phy_timer_pending = false; |
| |
| atlx_irq_disable(adapter); |
| free_irq(adapter->pdev->irq, netdev); |
| pci_disable_msi(adapter->pdev); |
| atl1_reset_hw(&adapter->hw); |
| adapter->cmb.cmb->int_stats = 0; |
| |
| adapter->link_speed = SPEED_0; |
| adapter->link_duplex = -1; |
| netif_carrier_off(netdev); |
| |
| atl1_clean_tx_ring(adapter); |
| atl1_clean_rx_ring(adapter); |
| } |
| |
| static void atl1_reset_dev_task(struct work_struct *work) |
| { |
| struct atl1_adapter *adapter = |
| container_of(work, struct atl1_adapter, reset_dev_task); |
| struct net_device *netdev = adapter->netdev; |
| |
| netif_device_detach(netdev); |
| atl1_down(adapter); |
| atl1_up(adapter); |
| netif_device_attach(netdev); |
| } |
| |
| /** |
| * atl1_change_mtu - Change the Maximum Transfer Unit |
| * @netdev: network interface device structure |
| * @new_mtu: new value for maximum frame size |
| * |
| * Returns 0 on success, negative on failure |
| */ |
| static int atl1_change_mtu(struct net_device *netdev, int new_mtu) |
| { |
| struct atl1_adapter *adapter = netdev_priv(netdev); |
| int old_mtu = netdev->mtu; |
| int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN; |
| |
| if ((max_frame < ETH_ZLEN + ETH_FCS_LEN) || |
| (max_frame > MAX_JUMBO_FRAME_SIZE)) { |
| if (netif_msg_link(adapter)) |
| dev_warn(&adapter->pdev->dev, "invalid MTU setting\n"); |
| return -EINVAL; |
| } |
| |
| adapter->hw.max_frame_size = max_frame; |
| adapter->hw.tx_jumbo_task_th = (max_frame + 7) >> 3; |
| adapter->rx_buffer_len = (max_frame + 7) & ~7; |
| adapter->hw.rx_jumbo_th = adapter->rx_buffer_len / 8; |
| |
| netdev->mtu = new_mtu; |
| if ((old_mtu != new_mtu) && netif_running(netdev)) { |
| atl1_down(adapter); |
| atl1_up(adapter); |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * atl1_open - Called when a network interface is made active |
| * @netdev: network interface device structure |
| * |
| * Returns 0 on success, negative value on failure |
| * |
| * The open entry point is called when a network interface is made |
| * active by the system (IFF_UP). At this point all resources needed |
| * for transmit and receive operations are allocated, the interrupt |
| * handler is registered with the OS, the watchdog timer is started, |
| * and the stack is notified that the interface is ready. |
| */ |
| static int atl1_open(struct net_device *netdev) |
| { |
| struct atl1_adapter *adapter = netdev_priv(netdev); |
| int err; |
| |
| netif_carrier_off(netdev); |
| |
| /* allocate transmit descriptors */ |
| err = atl1_setup_ring_resources(adapter); |
| if (err) |
| return err; |
| |
| err = atl1_up(adapter); |
| if (err) |
| goto err_up; |
| |
| return 0; |
| |
| err_up: |
| atl1_reset(adapter); |
| return err; |
| } |
| |
| /** |
| * atl1_close - Disables a network interface |
| * @netdev: network interface device structure |
| * |
| * Returns 0, this is not allowed to fail |
| * |
| * The close entry point is called when an interface is de-activated |
| * by the OS. The hardware is still under the drivers control, but |
| * needs to be disabled. A global MAC reset is issued to stop the |
| * hardware, and all transmit and receive resources are freed. |
| */ |
| static int atl1_close(struct net_device *netdev) |
| { |
| struct atl1_adapter *adapter = netdev_priv(netdev); |
| atl1_down(adapter); |
| atl1_free_ring_resources(adapter); |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM |
| static int atl1_suspend(struct device *dev) |
| { |
| struct pci_dev *pdev = to_pci_dev(dev); |
| struct net_device *netdev = pci_get_drvdata(pdev); |
| struct atl1_adapter *adapter = netdev_priv(netdev); |
| struct atl1_hw *hw = &adapter->hw; |
| u32 ctrl = 0; |
| u32 wufc = adapter->wol; |
| u32 val; |
| u16 speed; |
| u16 duplex; |
| |
| netif_device_detach(netdev); |
| if (netif_running(netdev)) |
| atl1_down(adapter); |
| |
| atl1_read_phy_reg(hw, MII_BMSR, (u16 *) & ctrl); |
| atl1_read_phy_reg(hw, MII_BMSR, (u16 *) & ctrl); |
| val = ctrl & BMSR_LSTATUS; |
| if (val) |
| wufc &= ~ATLX_WUFC_LNKC; |
| if (!wufc) |
| goto disable_wol; |
| |
| if (val) { |
| val = atl1_get_speed_and_duplex(hw, &speed, &duplex); |
| if (val) { |
| if (netif_msg_ifdown(adapter)) |
| dev_printk(KERN_DEBUG, &pdev->dev, |
| "error getting speed/duplex\n"); |
| goto disable_wol; |
| } |
| |
| ctrl = 0; |
| |
| /* enable magic packet WOL */ |
| if (wufc & ATLX_WUFC_MAG) |
| ctrl |= (WOL_MAGIC_EN | WOL_MAGIC_PME_EN); |
| iowrite32(ctrl, hw->hw_addr + REG_WOL_CTRL); |
| ioread32(hw->hw_addr + REG_WOL_CTRL); |
| |
| /* configure the mac */ |
| ctrl = MAC_CTRL_RX_EN; |
| ctrl |= ((u32)((speed == SPEED_1000) ? MAC_CTRL_SPEED_1000 : |
| MAC_CTRL_SPEED_10_100) << MAC_CTRL_SPEED_SHIFT); |
| if (duplex == FULL_DUPLEX) |
| ctrl |= MAC_CTRL_DUPLX; |
| ctrl |= (((u32)adapter->hw.preamble_len & |
| MAC_CTRL_PRMLEN_MASK) << MAC_CTRL_PRMLEN_SHIFT); |
| __atlx_vlan_mode(netdev->features, &ctrl); |
| if (wufc & ATLX_WUFC_MAG) |
| ctrl |= MAC_CTRL_BC_EN; |
| iowrite32(ctrl, hw->hw_addr + REG_MAC_CTRL); |
| ioread32(hw->hw_addr + REG_MAC_CTRL); |
| |
| /* poke the PHY */ |
| ctrl = ioread32(hw->hw_addr + REG_PCIE_PHYMISC); |
| ctrl |= PCIE_PHYMISC_FORCE_RCV_DET; |
| iowrite32(ctrl, hw->hw_addr + REG_PCIE_PHYMISC); |
| ioread32(hw->hw_addr + REG_PCIE_PHYMISC); |
| } else { |
| ctrl |= (WOL_LINK_CHG_EN | WOL_LINK_CHG_PME_EN); |
| iowrite32(ctrl, hw->hw_addr + REG_WOL_CTRL); |
| ioread32(hw->hw_addr + REG_WOL_CTRL); |
| iowrite32(0, hw->hw_addr + REG_MAC_CTRL); |
| ioread32(hw->hw_addr + REG_MAC_CTRL); |
| hw->phy_configured = false; |
| } |
| |
| return 0; |
| |
| disable_wol: |
| iowrite32(0, hw->hw_addr + REG_WOL_CTRL); |
| ioread32(hw->hw_addr + REG_WOL_CTRL); |
| ctrl = ioread32(hw->hw_addr + REG_PCIE_PHYMISC); |
| ctrl |= PCIE_PHYMISC_FORCE_RCV_DET; |
| iowrite32(ctrl, hw->hw_addr + REG_PCIE_PHYMISC); |
| ioread32(hw->hw_addr + REG_PCIE_PHYMISC); |
| hw->phy_configured = false; |
| |
| return 0; |
| } |
| |
| static int atl1_resume(struct device *dev) |
| { |
| struct pci_dev *pdev = to_pci_dev(dev); |
| struct net_device *netdev = pci_get_drvdata(pdev); |
| struct atl1_adapter *adapter = netdev_priv(netdev); |
| |
| iowrite32(0, adapter->hw.hw_addr + REG_WOL_CTRL); |
| |
| atl1_reset_hw(&adapter->hw); |
| |
| if (netif_running(netdev)) { |
| adapter->cmb.cmb->int_stats = 0; |
| atl1_up(adapter); |
| } |
| netif_device_attach(netdev); |
| |
| return 0; |
| } |
| |
| static SIMPLE_DEV_PM_OPS(atl1_pm_ops, atl1_suspend, atl1_resume); |
| #define ATL1_PM_OPS (&atl1_pm_ops) |
| |
| #else |
| |
| static int atl1_suspend(struct device *dev) { return 0; } |
| |
| #define ATL1_PM_OPS NULL |
| #endif |
| |
| static void atl1_shutdown(struct pci_dev *pdev) |
| { |
| struct net_device *netdev = pci_get_drvdata(pdev); |
| struct atl1_adapter *adapter = netdev_priv(netdev); |
| |
| atl1_suspend(&pdev->dev); |
| pci_wake_from_d3(pdev, adapter->wol); |
| pci_set_power_state(pdev, PCI_D3hot); |
| } |
| |
| #ifdef CONFIG_NET_POLL_CONTROLLER |
| static void atl1_poll_controller(struct net_device *netdev) |
| { |
| disable_irq(netdev->irq); |
| atl1_intr(netdev->irq, netdev); |
| enable_irq(netdev->irq); |
| } |
| #endif |
| |
| static const struct net_device_ops atl1_netdev_ops = { |
| .ndo_open = atl1_open, |
| .ndo_stop = atl1_close, |
| .ndo_start_xmit = atl1_xmit_frame, |
| .ndo_set_rx_mode = atlx_set_multi, |
| .ndo_validate_addr = eth_validate_addr, |
| .ndo_set_mac_address = atl1_set_mac, |
| .ndo_change_mtu = atl1_change_mtu, |
| .ndo_fix_features = atlx_fix_features, |
| .ndo_set_features = atlx_set_features, |
| .ndo_do_ioctl = atlx_ioctl, |
| .ndo_tx_timeout = atlx_tx_timeout, |
| #ifdef CONFIG_NET_POLL_CONTROLLER |
| .ndo_poll_controller = atl1_poll_controller, |
| #endif |
| }; |
| |
| /** |
| * atl1_probe - Device Initialization Routine |
| * @pdev: PCI device information struct |
| * @ent: entry in atl1_pci_tbl |
| * |
| * Returns 0 on success, negative on failure |
| * |
| * atl1_probe initializes an adapter identified by a pci_dev structure. |
| * The OS initialization, configuring of the adapter private structure, |
| * and a hardware reset occur. |
| */ |
| static int __devinit atl1_probe(struct pci_dev *pdev, |
| const struct pci_device_id *ent) |
| { |
| struct net_device *netdev; |
| struct atl1_adapter *adapter; |
| static int cards_found = 0; |
| int err; |
| |
| err = pci_enable_device(pdev); |
| if (err) |
| return err; |
| |
| /* |
| * The atl1 chip can DMA to 64-bit addresses, but it uses a single |
| * shared register for the high 32 bits, so only a single, aligned, |
| * 4 GB physical address range can be used at a time. |
| * |
| * Supporting 64-bit DMA on this hardware is more trouble than it's |
| * worth. It is far easier to limit to 32-bit DMA than update |
| * various kernel subsystems to support the mechanics required by a |
| * fixed-high-32-bit system. |
| */ |
| err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); |
| if (err) { |
| dev_err(&pdev->dev, "no usable DMA configuration\n"); |
| goto err_dma; |
| } |
| /* |
| * Mark all PCI regions associated with PCI device |
| * pdev as being reserved by owner atl1_driver_name |
| */ |
| err = pci_request_regions(pdev, ATLX_DRIVER_NAME); |
| if (err) |
| goto err_request_regions; |
| |
| /* |
| * Enables bus-mastering on the device and calls |
| * pcibios_set_master to do the needed arch specific settings |
| */ |
| pci_set_master(pdev); |
| |
| netdev = alloc_etherdev(sizeof(struct atl1_adapter)); |
| if (!netdev) { |
| err = -ENOMEM; |
| goto err_alloc_etherdev; |
| } |
| SET_NETDEV_DEV(netdev, &pdev->dev); |
| |
| pci_set_drvdata(pdev, netdev); |
| adapter = netdev_priv(netdev); |
| adapter->netdev = netdev; |
| adapter->pdev = pdev; |
| adapter->hw.back = adapter; |
| adapter->msg_enable = netif_msg_init(debug, atl1_default_msg); |
| |
| adapter->hw.hw_addr = pci_iomap(pdev, 0, 0); |
| if (!adapter->hw.hw_addr) { |
| err = -EIO; |
| goto err_pci_iomap; |
| } |
| /* get device revision number */ |
| adapter->hw.dev_rev = ioread16(adapter->hw.hw_addr + |
| (REG_MASTER_CTRL + 2)); |
| if (netif_msg_probe(adapter)) |
| dev_info(&pdev->dev, "version %s\n", ATLX_DRIVER_VERSION); |
| |
| /* set default ring resource counts */ |
| adapter->rfd_ring.count = adapter->rrd_ring.count = ATL1_DEFAULT_RFD; |
| adapter->tpd_ring.count = ATL1_DEFAULT_TPD; |
| |
| adapter->mii.dev = netdev; |
| adapter->mii.mdio_read = mdio_read; |
| adapter->mii.mdio_write = mdio_write; |
| adapter->mii.phy_id_mask = 0x1f; |
| adapter->mii.reg_num_mask = 0x1f; |
| |
| netdev->netdev_ops = &atl1_netdev_ops; |
| netdev->watchdog_timeo = 5 * HZ; |
| netif_napi_add(netdev, &adapter->napi, atl1_rings_clean, 64); |
| |
| netdev->ethtool_ops = &atl1_ethtool_ops; |
| adapter->bd_number = cards_found; |
| |
| /* setup the private structure */ |
| err = atl1_sw_init(adapter); |
| if (err) |
| goto err_common; |
| |
| netdev->features = NETIF_F_HW_CSUM; |
| netdev->features |= NETIF_F_SG; |
| netdev->features |= (NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX); |
| |
| netdev->hw_features = NETIF_F_HW_CSUM | NETIF_F_SG | NETIF_F_TSO | |
| NETIF_F_HW_VLAN_RX; |
| |
| /* is this valid? see atl1_setup_mac_ctrl() */ |
| netdev->features |= NETIF_F_RXCSUM; |
| |
| /* |
| * patch for some L1 of old version, |
| * the final version of L1 may not need these |
| * patches |
| */ |
| /* atl1_pcie_patch(adapter); */ |
| |
| /* really reset GPHY core */ |
| iowrite16(0, adapter->hw.hw_addr + REG_PHY_ENABLE); |
| |
| /* |
| * reset the controller to |
| * put the device in a known good starting state |
| */ |
| if (atl1_reset_hw(&adapter->hw)) { |
| err = -EIO; |
| goto err_common; |
| } |
| |
| /* copy the MAC address out of the EEPROM */ |
| if (atl1_read_mac_addr(&adapter->hw)) { |
| /* mark random mac */ |
| netdev->addr_assign_type |= NET_ADDR_RANDOM; |
| } |
| memcpy(netdev->dev_addr, adapter->hw.mac_addr, netdev->addr_len); |
| |
| if (!is_valid_ether_addr(netdev->dev_addr)) { |
| err = -EIO; |
| goto err_common; |
| } |
| |
| atl1_check_options(adapter); |
| |
| /* pre-init the MAC, and setup link */ |
| err = atl1_init_hw(&adapter->hw); |
| if (err) { |
| err = -EIO; |
| goto err_common; |
| } |
| |
| atl1_pcie_patch(adapter); |
| /* assume we have no link for now */ |
| netif_carrier_off(netdev); |
| |
| setup_timer(&adapter->phy_config_timer, atl1_phy_config, |
| (unsigned long)adapter); |
| adapter->phy_timer_pending = false; |
| |
| INIT_WORK(&adapter->reset_dev_task, atl1_reset_dev_task); |
| |
| INIT_WORK(&adapter->link_chg_task, atlx_link_chg_task); |
| |
| err = register_netdev(netdev); |
| if (err) |
| goto err_common; |
| |
| cards_found++; |
| atl1_via_workaround(adapter); |
| return 0; |
| |
| err_common: |
| pci_iounmap(pdev, adapter->hw.hw_addr); |
| err_pci_iomap: |
| free_netdev(netdev); |
| err_alloc_etherdev: |
| pci_release_regions(pdev); |
| err_dma: |
| err_request_regions: |
| pci_disable_device(pdev); |
| return err; |
| } |
| |
| /** |
| * atl1_remove - Device Removal Routine |
| * @pdev: PCI device information struct |
| * |
| * atl1_remove is called by the PCI subsystem to alert the driver |
| * that it should release a PCI device. The could be caused by a |
| * Hot-Plug event, or because the driver is going to be removed from |
| * memory. |
| */ |
| static void __devexit atl1_remove(struct pci_dev *pdev) |
| { |
| struct net_device *netdev = pci_get_drvdata(pdev); |
| struct atl1_adapter *adapter; |
| /* Device not available. Return. */ |
| if (!netdev) |
| return; |
| |
| adapter = netdev_priv(netdev); |
| |
| /* |
| * Some atl1 boards lack persistent storage for their MAC, and get it |
| * from the BIOS during POST. If we've been messing with the MAC |
| * address, we need to save the permanent one. |
| */ |
| if (memcmp(adapter->hw.mac_addr, adapter->hw.perm_mac_addr, ETH_ALEN)) { |
| memcpy(adapter->hw.mac_addr, adapter->hw.perm_mac_addr, |
| ETH_ALEN); |
| atl1_set_mac_addr(&adapter->hw); |
| } |
| |
| iowrite16(0, adapter->hw.hw_addr + REG_PHY_ENABLE); |
| unregister_netdev(netdev); |
| pci_iounmap(pdev, adapter->hw.hw_addr); |
| pci_release_regions(pdev); |
| free_netdev(netdev); |
| pci_disable_device(pdev); |
| } |
| |
| static struct pci_driver atl1_driver = { |
| .name = ATLX_DRIVER_NAME, |
| .id_table = atl1_pci_tbl, |
| .probe = atl1_probe, |
| .remove = __devexit_p(atl1_remove), |
| .shutdown = atl1_shutdown, |
| .driver.pm = ATL1_PM_OPS, |
| }; |
| |
| /** |
| * atl1_exit_module - Driver Exit Cleanup Routine |
| * |
| * atl1_exit_module is called just before the driver is removed |
| * from memory. |
| */ |
| static void __exit atl1_exit_module(void) |
| { |
| pci_unregister_driver(&atl1_driver); |
| } |
| |
| /** |
| * atl1_init_module - Driver Registration Routine |
| * |
| * atl1_init_module is the first routine called when the driver is |
| * loaded. All it does is register with the PCI subsystem. |
| */ |
| static int __init atl1_init_module(void) |
| { |
| return pci_register_driver(&atl1_driver); |
| } |
| |
| module_init(atl1_init_module); |
| module_exit(atl1_exit_module); |
| |
| struct atl1_stats { |
| char stat_string[ETH_GSTRING_LEN]; |
| int sizeof_stat; |
| int stat_offset; |
| }; |
| |
| #define ATL1_STAT(m) \ |
| sizeof(((struct atl1_adapter *)0)->m), offsetof(struct atl1_adapter, m) |
| |
| static struct atl1_stats atl1_gstrings_stats[] = { |
| {"rx_packets", ATL1_STAT(soft_stats.rx_packets)}, |
| {"tx_packets", ATL1_STAT(soft_stats.tx_packets)}, |
| {"rx_bytes", ATL1_STAT(soft_stats.rx_bytes)}, |
| {"tx_bytes", ATL1_STAT(soft_stats.tx_bytes)}, |
| {"rx_errors", ATL1_STAT(soft_stats.rx_errors)}, |
| {"tx_errors", ATL1_STAT(soft_stats.tx_errors)}, |
| {"multicast", ATL1_STAT(soft_stats.multicast)}, |
| {"collisions", ATL1_STAT(soft_stats.collisions)}, |
| {"rx_length_errors", ATL1_STAT(soft_stats.rx_length_errors)}, |
| {"rx_over_errors", ATL1_STAT(soft_stats.rx_missed_errors)}, |
| {"rx_crc_errors", ATL1_STAT(soft_stats.rx_crc_errors)}, |
| {"rx_frame_errors", ATL1_STAT(soft_stats.rx_frame_errors)}, |
| {"rx_fifo_errors", ATL1_STAT(soft_stats.rx_fifo_errors)}, |
| {"rx_missed_errors", ATL1_STAT(soft_stats.rx_missed_errors)}, |
| {"tx_aborted_errors", ATL1_STAT(soft_stats.tx_aborted_errors)}, |
| {"tx_carrier_errors", ATL1_STAT(soft_stats.tx_carrier_errors)}, |
| {"tx_fifo_errors", ATL1_STAT(soft_stats.tx_fifo_errors)}, |
| {"tx_window_errors", ATL1_STAT(soft_stats.tx_window_errors)}, |
| {"tx_abort_exce_coll", ATL1_STAT(soft_stats.excecol)}, |
| {"tx_abort_late_coll", ATL1_STAT(soft_stats.latecol)}, |
| {"tx_deferred_ok", ATL1_STAT(soft_stats.deffer)}, |
| {"tx_single_coll_ok", ATL1_STAT(soft_stats.scc)}, |
| {"tx_multi_coll_ok", ATL1_STAT(soft_stats.mcc)}, |
| {"tx_underun", ATL1_STAT(soft_stats.tx_underun)}, |
| {"tx_trunc", ATL1_STAT(soft_stats.tx_trunc)}, |
| {"tx_pause", ATL1_STAT(soft_stats.tx_pause)}, |
| {"rx_pause", ATL1_STAT(soft_stats.rx_pause)}, |
| {"rx_rrd_ov", ATL1_STAT(soft_stats.rx_rrd_ov)}, |
| {"rx_trunc", ATL1_STAT(soft_stats.rx_trunc)} |
| }; |
| |
| static void atl1_get_ethtool_stats(struct net_device *netdev, |
| struct ethtool_stats *stats, u64 *data) |
| { |
| struct atl1_adapter *adapter = netdev_priv(netdev); |
| int i; |
| char *p; |
| |
| for (i = 0; i < ARRAY_SIZE(atl1_gstrings_stats); i++) { |
| p = (char *)adapter+atl1_gstrings_stats[i].stat_offset; |
| data[i] = (atl1_gstrings_stats[i].sizeof_stat == |
| sizeof(u64)) ? *(u64 *)p : *(u32 *)p; |
| } |
| |
| } |
| |
| static int atl1_get_sset_count(struct net_device *netdev, int sset) |
| { |
| switch (sset) { |
| case ETH_SS_STATS: |
| return ARRAY_SIZE(atl1_gstrings_stats); |
| default: |
| return -EOPNOTSUPP; |
| } |
| } |
| |
| static int atl1_get_settings(struct net_device *netdev, |
| struct ethtool_cmd *ecmd) |
| { |
| struct atl1_adapter *adapter = netdev_priv(netdev); |
| struct atl1_hw *hw = &adapter->hw; |
| |
| ecmd->supported = (SUPPORTED_10baseT_Half | |
| SUPPORTED_10baseT_Full | |
| SUPPORTED_100baseT_Half | |
| SUPPORTED_100baseT_Full | |
| SUPPORTED_1000baseT_Full | |
| SUPPORTED_Autoneg | SUPPORTED_TP); |
| ecmd->advertising = ADVERTISED_TP; |
| if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR || |
| hw->media_type == MEDIA_TYPE_1000M_FULL) { |
| ecmd->advertising |= ADVERTISED_Autoneg; |
| if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR) { |
| ecmd->advertising |= ADVERTISED_Autoneg; |
| ecmd->advertising |= |
| (ADVERTISED_10baseT_Half | |
| ADVERTISED_10baseT_Full | |
| ADVERTISED_100baseT_Half | |
| ADVERTISED_100baseT_Full | |
| ADVERTISED_1000baseT_Full); |
| } else |
| ecmd->advertising |= (ADVERTISED_1000baseT_Full); |
| } |
| ecmd->port = PORT_TP; |
| ecmd->phy_address = 0; |
| ecmd->transceiver = XCVR_INTERNAL; |
| |
| if (netif_carrier_ok(adapter->netdev)) { |
| u16 link_speed, link_duplex; |
| atl1_get_speed_and_duplex(hw, &link_speed, &link_duplex); |
| ethtool_cmd_speed_set(ecmd, link_speed); |
| if (link_duplex == FULL_DUPLEX) |
| ecmd->duplex = DUPLEX_FULL; |
| else |
| ecmd->duplex = DUPLEX_HALF; |
| } else { |
| ethtool_cmd_speed_set(ecmd, -1); |
| ecmd->duplex = -1; |
| } |
| if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR || |
| hw->media_type == MEDIA_TYPE_1000M_FULL) |
| ecmd->autoneg = AUTONEG_ENABLE; |
| else |
| ecmd->autoneg = AUTONEG_DISABLE; |
| |
| return 0; |
| } |
| |
| static int atl1_set_settings(struct net_device *netdev, |
| struct ethtool_cmd *ecmd) |
| { |
| struct atl1_adapter *adapter = netdev_priv(netdev); |
| struct atl1_hw *hw = &adapter->hw; |
| u16 phy_data; |
| int ret_val = 0; |
| u16 old_media_type = hw->media_type; |
| |
| if (netif_running(adapter->netdev)) { |
| if (netif_msg_link(adapter)) |
| dev_dbg(&adapter->pdev->dev, |
| "ethtool shutting down adapter\n"); |
| atl1_down(adapter); |
| } |
| |
| if (ecmd->autoneg == AUTONEG_ENABLE) |
| hw->media_type = MEDIA_TYPE_AUTO_SENSOR; |
| else { |
| u32 speed = ethtool_cmd_speed(ecmd); |
| if (speed == SPEED_1000) { |
| if (ecmd->duplex != DUPLEX_FULL) { |
| if (netif_msg_link(adapter)) |
| dev_warn(&adapter->pdev->dev, |
| "1000M half is invalid\n"); |
| ret_val = -EINVAL; |
| goto exit_sset; |
| } |
| hw->media_type = MEDIA_TYPE_1000M_FULL; |
| } else if (speed == SPEED_100) { |
| if (ecmd->duplex == DUPLEX_FULL) |
| hw->media_type = MEDIA_TYPE_100M_FULL; |
| else |
| hw->media_type = MEDIA_TYPE_100M_HALF; |
| } else { |
| if (ecmd->duplex == DUPLEX_FULL) |
| hw->media_type = MEDIA_TYPE_10M_FULL; |
| else |
| hw->media_type = MEDIA_TYPE_10M_HALF; |
| } |
| } |
| switch (hw->media_type) { |
| case MEDIA_TYPE_AUTO_SENSOR: |
| ecmd->advertising = |
| ADVERTISED_10baseT_Half | |
| ADVERTISED_10baseT_Full | |
| ADVERTISED_100baseT_Half | |
| ADVERTISED_100baseT_Full | |
| ADVERTISED_1000baseT_Full | |
| ADVERTISED_Autoneg | ADVERTISED_TP; |
| break; |
| case MEDIA_TYPE_1000M_FULL: |
| ecmd->advertising = |
| ADVERTISED_1000baseT_Full | |
| ADVERTISED_Autoneg | ADVERTISED_TP; |
| break; |
| default: |
| ecmd->advertising = 0; |
| break; |
| } |
| if (atl1_phy_setup_autoneg_adv(hw)) { |
| ret_val = -EINVAL; |
| if (netif_msg_link(adapter)) |
| dev_warn(&adapter->pdev->dev, |
| "invalid ethtool speed/duplex setting\n"); |
| goto exit_sset; |
| } |
| if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR || |
| hw->media_type == MEDIA_TYPE_1000M_FULL) |
| phy_data = MII_CR_RESET | MII_CR_AUTO_NEG_EN; |
| else { |
| switch (hw->media_type) { |
| case MEDIA_TYPE_100M_FULL: |
| phy_data = |
| MII_CR_FULL_DUPLEX | MII_CR_SPEED_100 | |
| MII_CR_RESET; |
| break; |
| case MEDIA_TYPE_100M_HALF: |
| phy_data = MII_CR_SPEED_100 | MII_CR_RESET; |
| break; |
| case MEDIA_TYPE_10M_FULL: |
| phy_data = |
| MII_CR_FULL_DUPLEX | MII_CR_SPEED_10 | MII_CR_RESET; |
| break; |
| default: |
| /* MEDIA_TYPE_10M_HALF: */ |
| phy_data = MII_CR_SPEED_10 | MII_CR_RESET; |
| break; |
| } |
| } |
| atl1_write_phy_reg(hw, MII_BMCR, phy_data); |
| exit_sset: |
| if (ret_val) |
| hw->media_type = old_media_type; |
| |
| if (netif_running(adapter->netdev)) { |
| if (netif_msg_link(adapter)) |
| dev_dbg(&adapter->pdev->dev, |
| "ethtool starting adapter\n"); |
| atl1_up(adapter); |
| } else if (!ret_val) { |
| if (netif_msg_link(adapter)) |
| dev_dbg(&adapter->pdev->dev, |
| "ethtool resetting adapter\n"); |
| atl1_reset(adapter); |
| } |
| return ret_val; |
| } |
| |
| static void atl1_get_drvinfo(struct net_device *netdev, |
| struct ethtool_drvinfo *drvinfo) |
| { |
| struct atl1_adapter *adapter = netdev_priv(netdev); |
| |
| strlcpy(drvinfo->driver, ATLX_DRIVER_NAME, sizeof(drvinfo->driver)); |
| strlcpy(drvinfo->version, ATLX_DRIVER_VERSION, |
| sizeof(drvinfo->version)); |
| strlcpy(drvinfo->bus_info, pci_name(adapter->pdev), |
| sizeof(drvinfo->bus_info)); |
| drvinfo->eedump_len = ATL1_EEDUMP_LEN; |
| } |
| |
| static void atl1_get_wol(struct net_device *netdev, |
| struct ethtool_wolinfo *wol) |
| { |
| struct atl1_adapter *adapter = netdev_priv(netdev); |
| |
| wol->supported = WAKE_MAGIC; |
| wol->wolopts = 0; |
| if (adapter->wol & ATLX_WUFC_MAG) |
| wol->wolopts |= WAKE_MAGIC; |
| } |
| |
| static int atl1_set_wol(struct net_device *netdev, |
| struct ethtool_wolinfo *wol) |
| { |
| struct atl1_adapter *adapter = netdev_priv(netdev); |
| |
| if (wol->wolopts & (WAKE_PHY | WAKE_UCAST | WAKE_MCAST | WAKE_BCAST | |
| WAKE_ARP | WAKE_MAGICSECURE)) |
| return -EOPNOTSUPP; |
| adapter->wol = 0; |
| if (wol->wolopts & WAKE_MAGIC) |
| adapter->wol |= ATLX_WUFC_MAG; |
| |
| device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol); |
| |
| return 0; |
| } |
| |
| static u32 atl1_get_msglevel(struct net_device *netdev) |
| { |
| struct atl1_adapter *adapter = netdev_priv(netdev); |
| return adapter->msg_enable; |
| } |
| |
| static void atl1_set_msglevel(struct net_device *netdev, u32 value) |
| { |
| struct atl1_adapter *adapter = netdev_priv(netdev); |
| adapter->msg_enable = value; |
| } |
| |
| static int atl1_get_regs_len(struct net_device *netdev) |
| { |
| return ATL1_REG_COUNT * sizeof(u32); |
| } |
| |
| static void atl1_get_regs(struct net_device *netdev, struct ethtool_regs *regs, |
| void *p) |
| { |
| struct atl1_adapter *adapter = netdev_priv(netdev); |
| struct atl1_hw *hw = &adapter->hw; |
| unsigned int i; |
| u32 *regbuf = p; |
| |
| for (i = 0; i < ATL1_REG_COUNT; i++) { |
| /* |
| * This switch statement avoids reserved regions |
| * of register space. |
| */ |
| switch (i) { |
| case 6 ... 9: |
| case 14: |
| case 29 ... 31: |
| case 34 ... 63: |
| case 75 ... 127: |
| case 136 ... 1023: |
| case 1027 ... 1087: |
| case 1091 ... 1151: |
| case 1194 ... 1195: |
| case 1200 ... 1201: |
| case 1206 ... 1213: |
| case 1216 ... 1279: |
| case 1290 ... 1311: |
| case 1323 ... 1343: |
| case 1358 ... 1359: |
| case 1368 ... 1375: |
| case 1378 ... 1383: |
| case 1388 ... 1391: |
| case 1393 ... 1395: |
| case 1402 ... 1403: |
| case 1410 ... 1471: |
| case 1522 ... 1535: |
| /* reserved region; don't read it */ |
| regbuf[i] = 0; |
| break; |
| default: |
| /* unreserved region */ |
| regbuf[i] = ioread32(hw->hw_addr + (i * sizeof(u32))); |
| } |
| } |
| } |
| |
| static void atl1_get_ringparam(struct net_device *netdev, |
| struct ethtool_ringparam *ring) |
| { |
| struct atl1_adapter *adapter = netdev_priv(netdev); |
| struct atl1_tpd_ring *txdr = &adapter->tpd_ring; |
| struct atl1_rfd_ring *rxdr = &adapter->rfd_ring; |
| |
| ring->rx_max_pending = ATL1_MAX_RFD; |
| ring->tx_max_pending = ATL1_MAX_TPD; |
| ring->rx_pending = rxdr->count; |
| ring->tx_pending = txdr->count; |
| } |
| |
| static int atl1_set_ringparam(struct net_device *netdev, |
| struct ethtool_ringparam *ring) |
| { |
| struct atl1_adapter *adapter = netdev_priv(netdev); |
| struct atl1_tpd_ring *tpdr = &adapter->tpd_ring; |
| struct atl1_rrd_ring *rrdr = &adapter->rrd_ring; |
| struct atl1_rfd_ring *rfdr = &adapter->rfd_ring; |
| |
| struct atl1_tpd_ring tpd_old, tpd_new; |
| struct atl1_rfd_ring rfd_old, rfd_new; |
| struct atl1_rrd_ring rrd_old, rrd_new; |
| struct atl1_ring_header rhdr_old, rhdr_new; |
| struct atl1_smb smb; |
| struct atl1_cmb cmb; |
| int err; |
| |
| tpd_old = adapter->tpd_ring; |
| rfd_old = adapter->rfd_ring; |
| rrd_old = adapter->rrd_ring; |
| rhdr_old = adapter->ring_header; |
| |
| if (netif_running(adapter->netdev)) |
| atl1_down(adapter); |
| |
| rfdr->count = (u16) max(ring->rx_pending, (u32) ATL1_MIN_RFD); |
| rfdr->count = rfdr->count > ATL1_MAX_RFD ? ATL1_MAX_RFD : |
| rfdr->count; |
| rfdr->count = (rfdr->count + 3) & ~3; |
| rrdr->count = rfdr->count; |
| |
| tpdr->count = (u16) max(ring->tx_pending, (u32) ATL1_MIN_TPD); |
| tpdr->count = tpdr->count > ATL1_MAX_TPD ? ATL1_MAX_TPD : |
| tpdr->count; |
| tpdr->count = (tpdr->count + 3) & ~3; |
| |
| if (netif_running(adapter->netdev)) { |
| /* try to get new resources before deleting old */ |
| err = atl1_setup_ring_resources(adapter); |
| if (err) |
| goto err_setup_ring; |
| |
| /* |
| * save the new, restore the old in order to free it, |
| * then restore the new back again |
| */ |
| |
| rfd_new = adapter->rfd_ring; |
| rrd_new = adapter->rrd_ring; |
| tpd_new = adapter->tpd_ring; |
| rhdr_new = adapter->ring_header; |
| adapter->rfd_ring = rfd_old; |
| adapter->rrd_ring = rrd_old; |
| adapter->tpd_ring = tpd_old; |
| adapter->ring_header = rhdr_old; |
| /* |
| * Save SMB and CMB, since atl1_free_ring_resources |
| * will clear them. |
| */ |
| smb = adapter->smb; |
| cmb = adapter->cmb; |
| atl1_free_ring_resources(adapter); |
| adapter->rfd_ring = rfd_new; |
| adapter->rrd_ring = rrd_new; |
| adapter->tpd_ring = tpd_new; |
| adapter->ring_header = rhdr_new; |
| adapter->smb = smb; |
| adapter->cmb = cmb; |
| |
| err = atl1_up(adapter); |
| if (err) |
| return err; |
| } |
| return 0; |
| |
| err_setup_ring: |
| adapter->rfd_ring = rfd_old; |
| adapter->rrd_ring = rrd_old; |
| adapter->tpd_ring = tpd_old; |
| adapter->ring_header = rhdr_old; |
| atl1_up(adapter); |
| return err; |
| } |
| |
| static void atl1_get_pauseparam(struct net_device *netdev, |
| struct ethtool_pauseparam *epause) |
| { |
| struct atl1_adapter *adapter = netdev_priv(netdev); |
| struct atl1_hw *hw = &adapter->hw; |
| |
| if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR || |
| hw->media_type == MEDIA_TYPE_1000M_FULL) { |
| epause->autoneg = AUTONEG_ENABLE; |
| } else { |
| epause->autoneg = AUTONEG_DISABLE; |
| } |
| epause->rx_pause = 1; |
| epause->tx_pause = 1; |
| } |
| |
| static int atl1_set_pauseparam(struct net_device *netdev, |
| struct ethtool_pauseparam *epause) |
| { |
| struct atl1_adapter *adapter = netdev_priv(netdev); |
| struct atl1_hw *hw = &adapter->hw; |
| |
| if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR || |
| hw->media_type == MEDIA_TYPE_1000M_FULL) { |
| epause->autoneg = AUTONEG_ENABLE; |
| } else { |
| epause->autoneg = AUTONEG_DISABLE; |
| } |
| |
| epause->rx_pause = 1; |
| epause->tx_pause = 1; |
| |
| return 0; |
| } |
| |
| static void atl1_get_strings(struct net_device *netdev, u32 stringset, |
| u8 *data) |
| { |
| u8 *p = data; |
| int i; |
| |
| switch (stringset) { |
| case ETH_SS_STATS: |
| for (i = 0; i < ARRAY_SIZE(atl1_gstrings_stats); i++) { |
| memcpy(p, atl1_gstrings_stats[i].stat_string, |
| ETH_GSTRING_LEN); |
| p += ETH_GSTRING_LEN; |
| } |
| break; |
| } |
| } |
| |
| static int atl1_nway_reset(struct net_device *netdev) |
| { |
| struct atl1_adapter *adapter = netdev_priv(netdev); |
| struct atl1_hw *hw = &adapter->hw; |
| |
| if (netif_running(netdev)) { |
| u16 phy_data; |
| atl1_down(adapter); |
| |
| if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR || |
| hw->media_type == MEDIA_TYPE_1000M_FULL) { |
| phy_data = MII_CR_RESET | MII_CR_AUTO_NEG_EN; |
| } else { |
| switch (hw->media_type) { |
| case MEDIA_TYPE_100M_FULL: |
| phy_data = MII_CR_FULL_DUPLEX | |
| MII_CR_SPEED_100 | MII_CR_RESET; |
| break; |
| case MEDIA_TYPE_100M_HALF: |
| phy_data = MII_CR_SPEED_100 | MII_CR_RESET; |
| break; |
| case MEDIA_TYPE_10M_FULL: |
| phy_data = MII_CR_FULL_DUPLEX | |
| MII_CR_SPEED_10 | MII_CR_RESET; |
| break; |
| default: |
| /* MEDIA_TYPE_10M_HALF */ |
| phy_data = MII_CR_SPEED_10 | MII_CR_RESET; |
| } |
| } |
| atl1_write_phy_reg(hw, MII_BMCR, phy_data); |
| atl1_up(adapter); |
| } |
| return 0; |
| } |
| |
| static const struct ethtool_ops atl1_ethtool_ops = { |
| .get_settings = atl1_get_settings, |
| .set_settings = atl1_set_settings, |
| .get_drvinfo = atl1_get_drvinfo, |
| .get_wol = atl1_get_wol, |
| .set_wol = atl1_set_wol, |
| .get_msglevel = atl1_get_msglevel, |
| .set_msglevel = atl1_set_msglevel, |
| .get_regs_len = atl1_get_regs_len, |
| .get_regs = atl1_get_regs, |
| .get_ringparam = atl1_get_ringparam, |
| .set_ringparam = atl1_set_ringparam, |
| .get_pauseparam = atl1_get_pauseparam, |
| .set_pauseparam = atl1_set_pauseparam, |
| .get_link = ethtool_op_get_link, |
| .get_strings = atl1_get_strings, |
| .nway_reset = atl1_nway_reset, |
| .get_ethtool_stats = atl1_get_ethtool_stats, |
| .get_sset_count = atl1_get_sset_count, |
| }; |