| /* |
| * dm1105.c - driver for DVB cards based on SDMC DM1105 PCI chip |
| * |
| * Copyright (C) 2008 Igor M. Liplianin <liplianin@me.by> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| */ |
| |
| #include <linux/i2c.h> |
| #include <linux/i2c-algo-bit.h> |
| #include <linux/init.h> |
| #include <linux/interrupt.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/proc_fs.h> |
| #include <linux/pci.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/slab.h> |
| #include <media/rc-core.h> |
| |
| #include "demux.h" |
| #include "dmxdev.h" |
| #include "dvb_demux.h" |
| #include "dvb_frontend.h" |
| #include "dvb_net.h" |
| #include "dvbdev.h" |
| #include "dvb-pll.h" |
| |
| #include "stv0299.h" |
| #include "stv0288.h" |
| #include "stb6000.h" |
| #include "si21xx.h" |
| #include "cx24116.h" |
| #include "z0194a.h" |
| #include "ts2020.h" |
| #include "ds3000.h" |
| |
| #define MODULE_NAME "dm1105" |
| |
| #define UNSET (-1U) |
| |
| #define DM1105_BOARD_NOAUTO UNSET |
| #define DM1105_BOARD_UNKNOWN 0 |
| #define DM1105_BOARD_DVBWORLD_2002 1 |
| #define DM1105_BOARD_DVBWORLD_2004 2 |
| #define DM1105_BOARD_AXESS_DM05 3 |
| #define DM1105_BOARD_UNBRANDED_I2C_ON_GPIO 4 |
| |
| /* ----------------------------------------------- */ |
| /* |
| * PCI ID's |
| */ |
| #ifndef PCI_VENDOR_ID_TRIGEM |
| #define PCI_VENDOR_ID_TRIGEM 0x109f |
| #endif |
| #ifndef PCI_VENDOR_ID_AXESS |
| #define PCI_VENDOR_ID_AXESS 0x195d |
| #endif |
| #ifndef PCI_DEVICE_ID_DM1105 |
| #define PCI_DEVICE_ID_DM1105 0x036f |
| #endif |
| #ifndef PCI_DEVICE_ID_DW2002 |
| #define PCI_DEVICE_ID_DW2002 0x2002 |
| #endif |
| #ifndef PCI_DEVICE_ID_DW2004 |
| #define PCI_DEVICE_ID_DW2004 0x2004 |
| #endif |
| #ifndef PCI_DEVICE_ID_DM05 |
| #define PCI_DEVICE_ID_DM05 0x1105 |
| #endif |
| /* ----------------------------------------------- */ |
| /* sdmc dm1105 registers */ |
| |
| /* TS Control */ |
| #define DM1105_TSCTR 0x00 |
| #define DM1105_DTALENTH 0x04 |
| |
| /* GPIO Interface */ |
| #define DM1105_GPIOVAL 0x08 |
| #define DM1105_GPIOCTR 0x0c |
| |
| /* PID serial number */ |
| #define DM1105_PIDN 0x10 |
| |
| /* Odd-even secret key select */ |
| #define DM1105_CWSEL 0x14 |
| |
| /* Host Command Interface */ |
| #define DM1105_HOST_CTR 0x18 |
| #define DM1105_HOST_AD 0x1c |
| |
| /* PCI Interface */ |
| #define DM1105_CR 0x30 |
| #define DM1105_RST 0x34 |
| #define DM1105_STADR 0x38 |
| #define DM1105_RLEN 0x3c |
| #define DM1105_WRP 0x40 |
| #define DM1105_INTCNT 0x44 |
| #define DM1105_INTMAK 0x48 |
| #define DM1105_INTSTS 0x4c |
| |
| /* CW Value */ |
| #define DM1105_ODD 0x50 |
| #define DM1105_EVEN 0x58 |
| |
| /* PID Value */ |
| #define DM1105_PID 0x60 |
| |
| /* IR Control */ |
| #define DM1105_IRCTR 0x64 |
| #define DM1105_IRMODE 0x68 |
| #define DM1105_SYSTEMCODE 0x6c |
| #define DM1105_IRCODE 0x70 |
| |
| /* Unknown Values */ |
| #define DM1105_ENCRYPT 0x74 |
| #define DM1105_VER 0x7c |
| |
| /* I2C Interface */ |
| #define DM1105_I2CCTR 0x80 |
| #define DM1105_I2CSTS 0x81 |
| #define DM1105_I2CDAT 0x82 |
| #define DM1105_I2C_RA 0x83 |
| /* ----------------------------------------------- */ |
| /* Interrupt Mask Bits */ |
| |
| #define INTMAK_TSIRQM 0x01 |
| #define INTMAK_HIRQM 0x04 |
| #define INTMAK_IRM 0x08 |
| #define INTMAK_ALLMASK (INTMAK_TSIRQM | \ |
| INTMAK_HIRQM | \ |
| INTMAK_IRM) |
| #define INTMAK_NONEMASK 0x00 |
| |
| /* Interrupt Status Bits */ |
| #define INTSTS_TSIRQ 0x01 |
| #define INTSTS_HIRQ 0x04 |
| #define INTSTS_IR 0x08 |
| |
| /* IR Control Bits */ |
| #define DM1105_IR_EN 0x01 |
| #define DM1105_SYS_CHK 0x02 |
| #define DM1105_REP_FLG 0x08 |
| |
| /* EEPROM addr */ |
| #define IIC_24C01_addr 0xa0 |
| /* Max board count */ |
| #define DM1105_MAX 0x04 |
| |
| #define DRIVER_NAME "dm1105" |
| #define DM1105_I2C_GPIO_NAME "dm1105-gpio" |
| |
| #define DM1105_DMA_PACKETS 47 |
| #define DM1105_DMA_PACKET_LENGTH (128*4) |
| #define DM1105_DMA_BYTES (128 * 4 * DM1105_DMA_PACKETS) |
| |
| /* */ |
| #define GPIO08 (1 << 8) |
| #define GPIO13 (1 << 13) |
| #define GPIO14 (1 << 14) |
| #define GPIO15 (1 << 15) |
| #define GPIO16 (1 << 16) |
| #define GPIO17 (1 << 17) |
| #define GPIO_ALL 0x03ffff |
| |
| /* GPIO's for LNB power control */ |
| #define DM1105_LNB_MASK (GPIO_ALL & ~(GPIO14 | GPIO13)) |
| #define DM1105_LNB_OFF GPIO17 |
| #define DM1105_LNB_13V (GPIO16 | GPIO08) |
| #define DM1105_LNB_18V GPIO08 |
| |
| /* GPIO's for LNB power control for Axess DM05 */ |
| #define DM05_LNB_MASK (GPIO_ALL & ~(GPIO14 | GPIO13)) |
| #define DM05_LNB_OFF GPIO17/* actually 13v */ |
| #define DM05_LNB_13V GPIO17 |
| #define DM05_LNB_18V (GPIO17 | GPIO16) |
| |
| /* GPIO's for LNB power control for unbranded with I2C on GPIO */ |
| #define UNBR_LNB_MASK (GPIO17 | GPIO16) |
| #define UNBR_LNB_OFF 0 |
| #define UNBR_LNB_13V GPIO17 |
| #define UNBR_LNB_18V (GPIO17 | GPIO16) |
| |
| static unsigned int card[] = {[0 ... 3] = UNSET }; |
| module_param_array(card, int, NULL, 0444); |
| MODULE_PARM_DESC(card, "card type"); |
| |
| static int ir_debug; |
| module_param(ir_debug, int, 0644); |
| MODULE_PARM_DESC(ir_debug, "enable debugging information for IR decoding"); |
| |
| static unsigned int dm1105_devcount; |
| |
| DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); |
| |
| struct dm1105_board { |
| char *name; |
| struct { |
| u32 mask, off, v13, v18; |
| } lnb; |
| u32 gpio_scl, gpio_sda; |
| }; |
| |
| struct dm1105_subid { |
| u16 subvendor; |
| u16 subdevice; |
| u32 card; |
| }; |
| |
| static const struct dm1105_board dm1105_boards[] = { |
| [DM1105_BOARD_UNKNOWN] = { |
| .name = "UNKNOWN/GENERIC", |
| .lnb = { |
| .mask = DM1105_LNB_MASK, |
| .off = DM1105_LNB_OFF, |
| .v13 = DM1105_LNB_13V, |
| .v18 = DM1105_LNB_18V, |
| }, |
| }, |
| [DM1105_BOARD_DVBWORLD_2002] = { |
| .name = "DVBWorld PCI 2002", |
| .lnb = { |
| .mask = DM1105_LNB_MASK, |
| .off = DM1105_LNB_OFF, |
| .v13 = DM1105_LNB_13V, |
| .v18 = DM1105_LNB_18V, |
| }, |
| }, |
| [DM1105_BOARD_DVBWORLD_2004] = { |
| .name = "DVBWorld PCI 2004", |
| .lnb = { |
| .mask = DM1105_LNB_MASK, |
| .off = DM1105_LNB_OFF, |
| .v13 = DM1105_LNB_13V, |
| .v18 = DM1105_LNB_18V, |
| }, |
| }, |
| [DM1105_BOARD_AXESS_DM05] = { |
| .name = "Axess/EasyTv DM05", |
| .lnb = { |
| .mask = DM05_LNB_MASK, |
| .off = DM05_LNB_OFF, |
| .v13 = DM05_LNB_13V, |
| .v18 = DM05_LNB_18V, |
| }, |
| }, |
| [DM1105_BOARD_UNBRANDED_I2C_ON_GPIO] = { |
| .name = "Unbranded DM1105 with i2c on GPIOs", |
| .lnb = { |
| .mask = UNBR_LNB_MASK, |
| .off = UNBR_LNB_OFF, |
| .v13 = UNBR_LNB_13V, |
| .v18 = UNBR_LNB_18V, |
| }, |
| .gpio_scl = GPIO14, |
| .gpio_sda = GPIO13, |
| }, |
| }; |
| |
| static const struct dm1105_subid dm1105_subids[] = { |
| { |
| .subvendor = 0x0000, |
| .subdevice = 0x2002, |
| .card = DM1105_BOARD_DVBWORLD_2002, |
| }, { |
| .subvendor = 0x0001, |
| .subdevice = 0x2002, |
| .card = DM1105_BOARD_DVBWORLD_2002, |
| }, { |
| .subvendor = 0x0000, |
| .subdevice = 0x2004, |
| .card = DM1105_BOARD_DVBWORLD_2004, |
| }, { |
| .subvendor = 0x0001, |
| .subdevice = 0x2004, |
| .card = DM1105_BOARD_DVBWORLD_2004, |
| }, { |
| .subvendor = 0x195d, |
| .subdevice = 0x1105, |
| .card = DM1105_BOARD_AXESS_DM05, |
| }, |
| }; |
| |
| static void dm1105_card_list(struct pci_dev *pci) |
| { |
| int i; |
| |
| if (0 == pci->subsystem_vendor && |
| 0 == pci->subsystem_device) { |
| printk(KERN_ERR |
| "dm1105: Your board has no valid PCI Subsystem ID\n" |
| "dm1105: and thus can't be autodetected\n" |
| "dm1105: Please pass card=<n> insmod option to\n" |
| "dm1105: workaround that. Redirect complaints to\n" |
| "dm1105: the vendor of the TV card. Best regards,\n" |
| "dm1105: -- tux\n"); |
| } else { |
| printk(KERN_ERR |
| "dm1105: Your board isn't known (yet) to the driver.\n" |
| "dm1105: You can try to pick one of the existing\n" |
| "dm1105: card configs via card=<n> insmod option.\n" |
| "dm1105: Updating to the latest version might help\n" |
| "dm1105: as well.\n"); |
| } |
| printk(KERN_ERR "Here is a list of valid choices for the card=<n> insmod option:\n"); |
| for (i = 0; i < ARRAY_SIZE(dm1105_boards); i++) |
| printk(KERN_ERR "dm1105: card=%d -> %s\n", |
| i, dm1105_boards[i].name); |
| } |
| |
| /* infrared remote control */ |
| struct infrared { |
| struct rc_dev *dev; |
| char input_phys[32]; |
| struct work_struct work; |
| u32 ir_command; |
| }; |
| |
| struct dm1105_dev { |
| /* pci */ |
| struct pci_dev *pdev; |
| u8 __iomem *io_mem; |
| |
| /* ir */ |
| struct infrared ir; |
| |
| /* dvb */ |
| struct dmx_frontend hw_frontend; |
| struct dmx_frontend mem_frontend; |
| struct dmxdev dmxdev; |
| struct dvb_adapter dvb_adapter; |
| struct dvb_demux demux; |
| struct dvb_frontend *fe; |
| struct dvb_net dvbnet; |
| unsigned int full_ts_users; |
| unsigned int boardnr; |
| int nr; |
| |
| /* i2c */ |
| struct i2c_adapter i2c_adap; |
| struct i2c_adapter i2c_bb_adap; |
| struct i2c_algo_bit_data i2c_bit; |
| |
| /* irq */ |
| struct work_struct work; |
| struct workqueue_struct *wq; |
| char wqn[16]; |
| |
| /* dma */ |
| dma_addr_t dma_addr; |
| unsigned char *ts_buf; |
| u32 wrp; |
| u32 nextwrp; |
| u32 buffer_size; |
| unsigned int PacketErrorCount; |
| unsigned int dmarst; |
| spinlock_t lock; |
| }; |
| |
| #define dm_io_mem(reg) ((unsigned long)(&dev->io_mem[reg])) |
| |
| #define dm_readb(reg) inb(dm_io_mem(reg)) |
| #define dm_writeb(reg, value) outb((value), (dm_io_mem(reg))) |
| |
| #define dm_readw(reg) inw(dm_io_mem(reg)) |
| #define dm_writew(reg, value) outw((value), (dm_io_mem(reg))) |
| |
| #define dm_readl(reg) inl(dm_io_mem(reg)) |
| #define dm_writel(reg, value) outl((value), (dm_io_mem(reg))) |
| |
| #define dm_andorl(reg, mask, value) \ |
| outl((inl(dm_io_mem(reg)) & ~(mask)) |\ |
| ((value) & (mask)), (dm_io_mem(reg))) |
| |
| #define dm_setl(reg, bit) dm_andorl((reg), (bit), (bit)) |
| #define dm_clearl(reg, bit) dm_andorl((reg), (bit), 0) |
| |
| /* The chip has 18 GPIOs. In HOST mode GPIO's used as 15 bit address lines, |
| so we can use only 3 GPIO's from GPIO15 to GPIO17. |
| Here I don't check whether HOST is enebled as it is not implemented yet. |
| */ |
| static void dm1105_gpio_set(struct dm1105_dev *dev, u32 mask) |
| { |
| if (mask & 0xfffc0000) |
| printk(KERN_ERR "%s: Only 18 GPIO's are allowed\n", __func__); |
| |
| if (mask & 0x0003ffff) |
| dm_setl(DM1105_GPIOVAL, mask & 0x0003ffff); |
| |
| } |
| |
| static void dm1105_gpio_clear(struct dm1105_dev *dev, u32 mask) |
| { |
| if (mask & 0xfffc0000) |
| printk(KERN_ERR "%s: Only 18 GPIO's are allowed\n", __func__); |
| |
| if (mask & 0x0003ffff) |
| dm_clearl(DM1105_GPIOVAL, mask & 0x0003ffff); |
| |
| } |
| |
| static void dm1105_gpio_andor(struct dm1105_dev *dev, u32 mask, u32 val) |
| { |
| if (mask & 0xfffc0000) |
| printk(KERN_ERR "%s: Only 18 GPIO's are allowed\n", __func__); |
| |
| if (mask & 0x0003ffff) |
| dm_andorl(DM1105_GPIOVAL, mask & 0x0003ffff, val); |
| |
| } |
| |
| static u32 dm1105_gpio_get(struct dm1105_dev *dev, u32 mask) |
| { |
| if (mask & 0xfffc0000) |
| printk(KERN_ERR "%s: Only 18 GPIO's are allowed\n", __func__); |
| |
| if (mask & 0x0003ffff) |
| return dm_readl(DM1105_GPIOVAL) & mask & 0x0003ffff; |
| |
| return 0; |
| } |
| |
| static void dm1105_gpio_enable(struct dm1105_dev *dev, u32 mask, int asoutput) |
| { |
| if (mask & 0xfffc0000) |
| printk(KERN_ERR "%s: Only 18 GPIO's are allowed\n", __func__); |
| |
| if ((mask & 0x0003ffff) && asoutput) |
| dm_clearl(DM1105_GPIOCTR, mask & 0x0003ffff); |
| else if ((mask & 0x0003ffff) && !asoutput) |
| dm_setl(DM1105_GPIOCTR, mask & 0x0003ffff); |
| |
| } |
| |
| static void dm1105_setline(struct dm1105_dev *dev, u32 line, int state) |
| { |
| if (state) |
| dm1105_gpio_enable(dev, line, 0); |
| else { |
| dm1105_gpio_enable(dev, line, 1); |
| dm1105_gpio_clear(dev, line); |
| } |
| } |
| |
| static void dm1105_setsda(void *data, int state) |
| { |
| struct dm1105_dev *dev = data; |
| |
| dm1105_setline(dev, dm1105_boards[dev->boardnr].gpio_sda, state); |
| } |
| |
| static void dm1105_setscl(void *data, int state) |
| { |
| struct dm1105_dev *dev = data; |
| |
| dm1105_setline(dev, dm1105_boards[dev->boardnr].gpio_scl, state); |
| } |
| |
| static int dm1105_getsda(void *data) |
| { |
| struct dm1105_dev *dev = data; |
| |
| return dm1105_gpio_get(dev, dm1105_boards[dev->boardnr].gpio_sda) |
| ? 1 : 0; |
| } |
| |
| static int dm1105_getscl(void *data) |
| { |
| struct dm1105_dev *dev = data; |
| |
| return dm1105_gpio_get(dev, dm1105_boards[dev->boardnr].gpio_scl) |
| ? 1 : 0; |
| } |
| |
| static int dm1105_i2c_xfer(struct i2c_adapter *i2c_adap, |
| struct i2c_msg *msgs, int num) |
| { |
| struct dm1105_dev *dev ; |
| |
| int addr, rc, i, j, k, len, byte, data; |
| u8 status; |
| |
| dev = i2c_adap->algo_data; |
| for (i = 0; i < num; i++) { |
| dm_writeb(DM1105_I2CCTR, 0x00); |
| if (msgs[i].flags & I2C_M_RD) { |
| /* read bytes */ |
| addr = msgs[i].addr << 1; |
| addr |= 1; |
| dm_writeb(DM1105_I2CDAT, addr); |
| for (byte = 0; byte < msgs[i].len; byte++) |
| dm_writeb(DM1105_I2CDAT + byte + 1, 0); |
| |
| dm_writeb(DM1105_I2CCTR, 0x81 + msgs[i].len); |
| for (j = 0; j < 55; j++) { |
| mdelay(10); |
| status = dm_readb(DM1105_I2CSTS); |
| if ((status & 0xc0) == 0x40) |
| break; |
| } |
| if (j >= 55) |
| return -1; |
| |
| for (byte = 0; byte < msgs[i].len; byte++) { |
| rc = dm_readb(DM1105_I2CDAT + byte + 1); |
| if (rc < 0) |
| goto err; |
| msgs[i].buf[byte] = rc; |
| } |
| } else if ((msgs[i].buf[0] == 0xf7) && (msgs[i].addr == 0x55)) { |
| /* prepaired for cx24116 firmware */ |
| /* Write in small blocks */ |
| len = msgs[i].len - 1; |
| k = 1; |
| do { |
| dm_writeb(DM1105_I2CDAT, msgs[i].addr << 1); |
| dm_writeb(DM1105_I2CDAT + 1, 0xf7); |
| for (byte = 0; byte < (len > 48 ? 48 : len); byte++) { |
| data = msgs[i].buf[k + byte]; |
| dm_writeb(DM1105_I2CDAT + byte + 2, data); |
| } |
| dm_writeb(DM1105_I2CCTR, 0x82 + (len > 48 ? 48 : len)); |
| for (j = 0; j < 25; j++) { |
| mdelay(10); |
| status = dm_readb(DM1105_I2CSTS); |
| if ((status & 0xc0) == 0x40) |
| break; |
| } |
| |
| if (j >= 25) |
| return -1; |
| |
| k += 48; |
| len -= 48; |
| } while (len > 0); |
| } else { |
| /* write bytes */ |
| dm_writeb(DM1105_I2CDAT, msgs[i].addr << 1); |
| for (byte = 0; byte < msgs[i].len; byte++) { |
| data = msgs[i].buf[byte]; |
| dm_writeb(DM1105_I2CDAT + byte + 1, data); |
| } |
| dm_writeb(DM1105_I2CCTR, 0x81 + msgs[i].len); |
| for (j = 0; j < 25; j++) { |
| mdelay(10); |
| status = dm_readb(DM1105_I2CSTS); |
| if ((status & 0xc0) == 0x40) |
| break; |
| } |
| |
| if (j >= 25) |
| return -1; |
| } |
| } |
| return num; |
| err: |
| return rc; |
| } |
| |
| static u32 functionality(struct i2c_adapter *adap) |
| { |
| return I2C_FUNC_I2C; |
| } |
| |
| static struct i2c_algorithm dm1105_algo = { |
| .master_xfer = dm1105_i2c_xfer, |
| .functionality = functionality, |
| }; |
| |
| static inline struct dm1105_dev *feed_to_dm1105_dev(struct dvb_demux_feed *feed) |
| { |
| return container_of(feed->demux, struct dm1105_dev, demux); |
| } |
| |
| static inline struct dm1105_dev *frontend_to_dm1105_dev(struct dvb_frontend *fe) |
| { |
| return container_of(fe->dvb, struct dm1105_dev, dvb_adapter); |
| } |
| |
| static int dm1105_set_voltage(struct dvb_frontend *fe, |
| enum fe_sec_voltage voltage) |
| { |
| struct dm1105_dev *dev = frontend_to_dm1105_dev(fe); |
| |
| dm1105_gpio_enable(dev, dm1105_boards[dev->boardnr].lnb.mask, 1); |
| if (voltage == SEC_VOLTAGE_18) |
| dm1105_gpio_andor(dev, |
| dm1105_boards[dev->boardnr].lnb.mask, |
| dm1105_boards[dev->boardnr].lnb.v18); |
| else if (voltage == SEC_VOLTAGE_13) |
| dm1105_gpio_andor(dev, |
| dm1105_boards[dev->boardnr].lnb.mask, |
| dm1105_boards[dev->boardnr].lnb.v13); |
| else |
| dm1105_gpio_andor(dev, |
| dm1105_boards[dev->boardnr].lnb.mask, |
| dm1105_boards[dev->boardnr].lnb.off); |
| |
| return 0; |
| } |
| |
| static void dm1105_set_dma_addr(struct dm1105_dev *dev) |
| { |
| dm_writel(DM1105_STADR, (__force u32)cpu_to_le32(dev->dma_addr)); |
| } |
| |
| static int dm1105_dma_map(struct dm1105_dev *dev) |
| { |
| dev->ts_buf = pci_alloc_consistent(dev->pdev, |
| 6 * DM1105_DMA_BYTES, |
| &dev->dma_addr); |
| |
| return !dev->ts_buf; |
| } |
| |
| static void dm1105_dma_unmap(struct dm1105_dev *dev) |
| { |
| pci_free_consistent(dev->pdev, |
| 6 * DM1105_DMA_BYTES, |
| dev->ts_buf, |
| dev->dma_addr); |
| } |
| |
| static void dm1105_enable_irqs(struct dm1105_dev *dev) |
| { |
| dm_writeb(DM1105_INTMAK, INTMAK_ALLMASK); |
| dm_writeb(DM1105_CR, 1); |
| } |
| |
| static void dm1105_disable_irqs(struct dm1105_dev *dev) |
| { |
| dm_writeb(DM1105_INTMAK, INTMAK_IRM); |
| dm_writeb(DM1105_CR, 0); |
| } |
| |
| static int dm1105_start_feed(struct dvb_demux_feed *f) |
| { |
| struct dm1105_dev *dev = feed_to_dm1105_dev(f); |
| |
| if (dev->full_ts_users++ == 0) |
| dm1105_enable_irqs(dev); |
| |
| return 0; |
| } |
| |
| static int dm1105_stop_feed(struct dvb_demux_feed *f) |
| { |
| struct dm1105_dev *dev = feed_to_dm1105_dev(f); |
| |
| if (--dev->full_ts_users == 0) |
| dm1105_disable_irqs(dev); |
| |
| return 0; |
| } |
| |
| /* ir work handler */ |
| static void dm1105_emit_key(struct work_struct *work) |
| { |
| struct infrared *ir = container_of(work, struct infrared, work); |
| u32 ircom = ir->ir_command; |
| u8 data; |
| |
| if (ir_debug) |
| printk(KERN_INFO "%s: received byte 0x%04x\n", __func__, ircom); |
| |
| data = (ircom >> 8) & 0x7f; |
| |
| /* FIXME: UNKNOWN because we don't generate a full NEC scancode (yet?) */ |
| rc_keydown(ir->dev, RC_TYPE_UNKNOWN, data, 0); |
| } |
| |
| /* work handler */ |
| static void dm1105_dmx_buffer(struct work_struct *work) |
| { |
| struct dm1105_dev *dev = container_of(work, struct dm1105_dev, work); |
| unsigned int nbpackets; |
| u32 oldwrp = dev->wrp; |
| u32 nextwrp = dev->nextwrp; |
| |
| if (!((dev->ts_buf[oldwrp] == 0x47) && |
| (dev->ts_buf[oldwrp + 188] == 0x47) && |
| (dev->ts_buf[oldwrp + 188 * 2] == 0x47))) { |
| dev->PacketErrorCount++; |
| /* bad packet found */ |
| if ((dev->PacketErrorCount >= 2) && |
| (dev->dmarst == 0)) { |
| dm_writeb(DM1105_RST, 1); |
| dev->wrp = 0; |
| dev->PacketErrorCount = 0; |
| dev->dmarst = 0; |
| return; |
| } |
| } |
| |
| if (nextwrp < oldwrp) { |
| memcpy(dev->ts_buf + dev->buffer_size, dev->ts_buf, nextwrp); |
| nbpackets = ((dev->buffer_size - oldwrp) + nextwrp) / 188; |
| } else |
| nbpackets = (nextwrp - oldwrp) / 188; |
| |
| dev->wrp = nextwrp; |
| dvb_dmx_swfilter_packets(&dev->demux, &dev->ts_buf[oldwrp], nbpackets); |
| } |
| |
| static irqreturn_t dm1105_irq(int irq, void *dev_id) |
| { |
| struct dm1105_dev *dev = dev_id; |
| |
| /* Read-Write INSTS Ack's Interrupt for DM1105 chip 16.03.2008 */ |
| unsigned int intsts = dm_readb(DM1105_INTSTS); |
| dm_writeb(DM1105_INTSTS, intsts); |
| |
| switch (intsts) { |
| case INTSTS_TSIRQ: |
| case (INTSTS_TSIRQ | INTSTS_IR): |
| dev->nextwrp = dm_readl(DM1105_WRP) - dm_readl(DM1105_STADR); |
| queue_work(dev->wq, &dev->work); |
| break; |
| case INTSTS_IR: |
| dev->ir.ir_command = dm_readl(DM1105_IRCODE); |
| schedule_work(&dev->ir.work); |
| break; |
| } |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int dm1105_ir_init(struct dm1105_dev *dm1105) |
| { |
| struct rc_dev *dev; |
| int err = -ENOMEM; |
| |
| dev = rc_allocate_device(RC_DRIVER_SCANCODE); |
| if (!dev) |
| return -ENOMEM; |
| |
| snprintf(dm1105->ir.input_phys, sizeof(dm1105->ir.input_phys), |
| "pci-%s/ir0", pci_name(dm1105->pdev)); |
| |
| dev->driver_name = MODULE_NAME; |
| dev->map_name = RC_MAP_DM1105_NEC; |
| dev->input_name = "DVB on-card IR receiver"; |
| dev->input_phys = dm1105->ir.input_phys; |
| dev->input_id.bustype = BUS_PCI; |
| dev->input_id.version = 1; |
| if (dm1105->pdev->subsystem_vendor) { |
| dev->input_id.vendor = dm1105->pdev->subsystem_vendor; |
| dev->input_id.product = dm1105->pdev->subsystem_device; |
| } else { |
| dev->input_id.vendor = dm1105->pdev->vendor; |
| dev->input_id.product = dm1105->pdev->device; |
| } |
| dev->dev.parent = &dm1105->pdev->dev; |
| |
| INIT_WORK(&dm1105->ir.work, dm1105_emit_key); |
| |
| err = rc_register_device(dev); |
| if (err < 0) { |
| rc_free_device(dev); |
| return err; |
| } |
| |
| dm1105->ir.dev = dev; |
| return 0; |
| } |
| |
| static void dm1105_ir_exit(struct dm1105_dev *dm1105) |
| { |
| rc_unregister_device(dm1105->ir.dev); |
| } |
| |
| static int dm1105_hw_init(struct dm1105_dev *dev) |
| { |
| dm1105_disable_irqs(dev); |
| |
| dm_writeb(DM1105_HOST_CTR, 0); |
| |
| /*DATALEN 188,*/ |
| dm_writeb(DM1105_DTALENTH, 188); |
| /*TS_STRT TS_VALP MSBFIRST TS_MODE ALPAS TSPES*/ |
| dm_writew(DM1105_TSCTR, 0xc10a); |
| |
| /* map DMA and set address */ |
| dm1105_dma_map(dev); |
| dm1105_set_dma_addr(dev); |
| /* big buffer */ |
| dm_writel(DM1105_RLEN, 5 * DM1105_DMA_BYTES); |
| dm_writeb(DM1105_INTCNT, 47); |
| |
| /* IR NEC mode enable */ |
| dm_writeb(DM1105_IRCTR, (DM1105_IR_EN | DM1105_SYS_CHK)); |
| dm_writeb(DM1105_IRMODE, 0); |
| dm_writew(DM1105_SYSTEMCODE, 0); |
| |
| return 0; |
| } |
| |
| static void dm1105_hw_exit(struct dm1105_dev *dev) |
| { |
| dm1105_disable_irqs(dev); |
| |
| /* IR disable */ |
| dm_writeb(DM1105_IRCTR, 0); |
| dm_writeb(DM1105_INTMAK, INTMAK_NONEMASK); |
| |
| dm1105_dma_unmap(dev); |
| } |
| |
| static struct stv0299_config sharp_z0194a_config = { |
| .demod_address = 0x68, |
| .inittab = sharp_z0194a_inittab, |
| .mclk = 88000000UL, |
| .invert = 1, |
| .skip_reinit = 0, |
| .lock_output = STV0299_LOCKOUTPUT_1, |
| .volt13_op0_op1 = STV0299_VOLT13_OP1, |
| .min_delay_ms = 100, |
| .set_symbol_rate = sharp_z0194a_set_symbol_rate, |
| }; |
| |
| static struct stv0288_config earda_config = { |
| .demod_address = 0x68, |
| .min_delay_ms = 100, |
| }; |
| |
| static struct si21xx_config serit_config = { |
| .demod_address = 0x68, |
| .min_delay_ms = 100, |
| |
| }; |
| |
| static struct cx24116_config serit_sp2633_config = { |
| .demod_address = 0x55, |
| }; |
| |
| static struct ds3000_config dvbworld_ds3000_config = { |
| .demod_address = 0x68, |
| }; |
| |
| static struct ts2020_config dvbworld_ts2020_config = { |
| .tuner_address = 0x60, |
| .clk_out_div = 1, |
| }; |
| |
| static int frontend_init(struct dm1105_dev *dev) |
| { |
| int ret; |
| |
| switch (dev->boardnr) { |
| case DM1105_BOARD_UNBRANDED_I2C_ON_GPIO: |
| dm1105_gpio_enable(dev, GPIO15, 1); |
| dm1105_gpio_clear(dev, GPIO15); |
| msleep(100); |
| dm1105_gpio_set(dev, GPIO15); |
| msleep(200); |
| dev->fe = dvb_attach( |
| stv0299_attach, &sharp_z0194a_config, |
| &dev->i2c_bb_adap); |
| if (dev->fe) { |
| dev->fe->ops.set_voltage = dm1105_set_voltage; |
| dvb_attach(dvb_pll_attach, dev->fe, 0x60, |
| &dev->i2c_bb_adap, DVB_PLL_OPERA1); |
| break; |
| } |
| |
| dev->fe = dvb_attach( |
| stv0288_attach, &earda_config, |
| &dev->i2c_bb_adap); |
| if (dev->fe) { |
| dev->fe->ops.set_voltage = dm1105_set_voltage; |
| dvb_attach(stb6000_attach, dev->fe, 0x61, |
| &dev->i2c_bb_adap); |
| break; |
| } |
| |
| dev->fe = dvb_attach( |
| si21xx_attach, &serit_config, |
| &dev->i2c_bb_adap); |
| if (dev->fe) |
| dev->fe->ops.set_voltage = dm1105_set_voltage; |
| break; |
| case DM1105_BOARD_DVBWORLD_2004: |
| dev->fe = dvb_attach( |
| cx24116_attach, &serit_sp2633_config, |
| &dev->i2c_adap); |
| if (dev->fe) { |
| dev->fe->ops.set_voltage = dm1105_set_voltage; |
| break; |
| } |
| |
| dev->fe = dvb_attach( |
| ds3000_attach, &dvbworld_ds3000_config, |
| &dev->i2c_adap); |
| if (dev->fe) { |
| dvb_attach(ts2020_attach, dev->fe, |
| &dvbworld_ts2020_config, &dev->i2c_adap); |
| dev->fe->ops.set_voltage = dm1105_set_voltage; |
| } |
| |
| break; |
| case DM1105_BOARD_DVBWORLD_2002: |
| case DM1105_BOARD_AXESS_DM05: |
| default: |
| dev->fe = dvb_attach( |
| stv0299_attach, &sharp_z0194a_config, |
| &dev->i2c_adap); |
| if (dev->fe) { |
| dev->fe->ops.set_voltage = dm1105_set_voltage; |
| dvb_attach(dvb_pll_attach, dev->fe, 0x60, |
| &dev->i2c_adap, DVB_PLL_OPERA1); |
| break; |
| } |
| |
| dev->fe = dvb_attach( |
| stv0288_attach, &earda_config, |
| &dev->i2c_adap); |
| if (dev->fe) { |
| dev->fe->ops.set_voltage = dm1105_set_voltage; |
| dvb_attach(stb6000_attach, dev->fe, 0x61, |
| &dev->i2c_adap); |
| break; |
| } |
| |
| dev->fe = dvb_attach( |
| si21xx_attach, &serit_config, |
| &dev->i2c_adap); |
| if (dev->fe) |
| dev->fe->ops.set_voltage = dm1105_set_voltage; |
| |
| } |
| |
| if (!dev->fe) { |
| dev_err(&dev->pdev->dev, "could not attach frontend\n"); |
| return -ENODEV; |
| } |
| |
| ret = dvb_register_frontend(&dev->dvb_adapter, dev->fe); |
| if (ret < 0) { |
| if (dev->fe->ops.release) |
| dev->fe->ops.release(dev->fe); |
| dev->fe = NULL; |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static void dm1105_read_mac(struct dm1105_dev *dev, u8 *mac) |
| { |
| static u8 command[1] = { 0x28 }; |
| |
| struct i2c_msg msg[] = { |
| { |
| .addr = IIC_24C01_addr >> 1, |
| .flags = 0, |
| .buf = command, |
| .len = 1 |
| }, { |
| .addr = IIC_24C01_addr >> 1, |
| .flags = I2C_M_RD, |
| .buf = mac, |
| .len = 6 |
| }, |
| }; |
| |
| dm1105_i2c_xfer(&dev->i2c_adap, msg , 2); |
| dev_info(&dev->pdev->dev, "MAC %pM\n", mac); |
| } |
| |
| static int dm1105_probe(struct pci_dev *pdev, |
| const struct pci_device_id *ent) |
| { |
| struct dm1105_dev *dev; |
| struct dvb_adapter *dvb_adapter; |
| struct dvb_demux *dvbdemux; |
| struct dmx_demux *dmx; |
| int ret = -ENOMEM; |
| int i; |
| |
| dev = kzalloc(sizeof(struct dm1105_dev), GFP_KERNEL); |
| if (!dev) |
| return -ENOMEM; |
| |
| /* board config */ |
| dev->nr = dm1105_devcount; |
| dev->boardnr = UNSET; |
| if (card[dev->nr] < ARRAY_SIZE(dm1105_boards)) |
| dev->boardnr = card[dev->nr]; |
| for (i = 0; UNSET == dev->boardnr && |
| i < ARRAY_SIZE(dm1105_subids); i++) |
| if (pdev->subsystem_vendor == |
| dm1105_subids[i].subvendor && |
| pdev->subsystem_device == |
| dm1105_subids[i].subdevice) |
| dev->boardnr = dm1105_subids[i].card; |
| |
| if (UNSET == dev->boardnr) { |
| dev->boardnr = DM1105_BOARD_UNKNOWN; |
| dm1105_card_list(pdev); |
| } |
| |
| dm1105_devcount++; |
| dev->pdev = pdev; |
| dev->buffer_size = 5 * DM1105_DMA_BYTES; |
| dev->PacketErrorCount = 0; |
| dev->dmarst = 0; |
| |
| ret = pci_enable_device(pdev); |
| if (ret < 0) |
| goto err_kfree; |
| |
| ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); |
| if (ret < 0) |
| goto err_pci_disable_device; |
| |
| pci_set_master(pdev); |
| |
| ret = pci_request_regions(pdev, DRIVER_NAME); |
| if (ret < 0) |
| goto err_pci_disable_device; |
| |
| dev->io_mem = pci_iomap(pdev, 0, pci_resource_len(pdev, 0)); |
| if (!dev->io_mem) { |
| ret = -EIO; |
| goto err_pci_release_regions; |
| } |
| |
| spin_lock_init(&dev->lock); |
| pci_set_drvdata(pdev, dev); |
| |
| ret = dm1105_hw_init(dev); |
| if (ret < 0) |
| goto err_pci_iounmap; |
| |
| /* i2c */ |
| i2c_set_adapdata(&dev->i2c_adap, dev); |
| strcpy(dev->i2c_adap.name, DRIVER_NAME); |
| dev->i2c_adap.owner = THIS_MODULE; |
| dev->i2c_adap.dev.parent = &pdev->dev; |
| dev->i2c_adap.algo = &dm1105_algo; |
| dev->i2c_adap.algo_data = dev; |
| ret = i2c_add_adapter(&dev->i2c_adap); |
| |
| if (ret < 0) |
| goto err_dm1105_hw_exit; |
| |
| i2c_set_adapdata(&dev->i2c_bb_adap, dev); |
| strcpy(dev->i2c_bb_adap.name, DM1105_I2C_GPIO_NAME); |
| dev->i2c_bb_adap.owner = THIS_MODULE; |
| dev->i2c_bb_adap.dev.parent = &pdev->dev; |
| dev->i2c_bb_adap.algo_data = &dev->i2c_bit; |
| dev->i2c_bit.data = dev; |
| dev->i2c_bit.setsda = dm1105_setsda; |
| dev->i2c_bit.setscl = dm1105_setscl; |
| dev->i2c_bit.getsda = dm1105_getsda; |
| dev->i2c_bit.getscl = dm1105_getscl; |
| dev->i2c_bit.udelay = 10; |
| dev->i2c_bit.timeout = 10; |
| |
| /* Raise SCL and SDA */ |
| dm1105_setsda(dev, 1); |
| dm1105_setscl(dev, 1); |
| |
| ret = i2c_bit_add_bus(&dev->i2c_bb_adap); |
| if (ret < 0) |
| goto err_i2c_del_adapter; |
| |
| /* dvb */ |
| ret = dvb_register_adapter(&dev->dvb_adapter, DRIVER_NAME, |
| THIS_MODULE, &pdev->dev, adapter_nr); |
| if (ret < 0) |
| goto err_i2c_del_adapters; |
| |
| dvb_adapter = &dev->dvb_adapter; |
| |
| dm1105_read_mac(dev, dvb_adapter->proposed_mac); |
| |
| dvbdemux = &dev->demux; |
| dvbdemux->filternum = 256; |
| dvbdemux->feednum = 256; |
| dvbdemux->start_feed = dm1105_start_feed; |
| dvbdemux->stop_feed = dm1105_stop_feed; |
| dvbdemux->dmx.capabilities = (DMX_TS_FILTERING | |
| DMX_SECTION_FILTERING | DMX_MEMORY_BASED_FILTERING); |
| ret = dvb_dmx_init(dvbdemux); |
| if (ret < 0) |
| goto err_dvb_unregister_adapter; |
| |
| dmx = &dvbdemux->dmx; |
| dev->dmxdev.filternum = 256; |
| dev->dmxdev.demux = dmx; |
| dev->dmxdev.capabilities = 0; |
| |
| ret = dvb_dmxdev_init(&dev->dmxdev, dvb_adapter); |
| if (ret < 0) |
| goto err_dvb_dmx_release; |
| |
| dev->hw_frontend.source = DMX_FRONTEND_0; |
| |
| ret = dmx->add_frontend(dmx, &dev->hw_frontend); |
| if (ret < 0) |
| goto err_dvb_dmxdev_release; |
| |
| dev->mem_frontend.source = DMX_MEMORY_FE; |
| |
| ret = dmx->add_frontend(dmx, &dev->mem_frontend); |
| if (ret < 0) |
| goto err_remove_hw_frontend; |
| |
| ret = dmx->connect_frontend(dmx, &dev->hw_frontend); |
| if (ret < 0) |
| goto err_remove_mem_frontend; |
| |
| ret = dvb_net_init(dvb_adapter, &dev->dvbnet, dmx); |
| if (ret < 0) |
| goto err_disconnect_frontend; |
| |
| ret = frontend_init(dev); |
| if (ret < 0) |
| goto err_dvb_net; |
| |
| dm1105_ir_init(dev); |
| |
| INIT_WORK(&dev->work, dm1105_dmx_buffer); |
| sprintf(dev->wqn, "%s/%d", dvb_adapter->name, dvb_adapter->num); |
| dev->wq = create_singlethread_workqueue(dev->wqn); |
| if (!dev->wq) { |
| ret = -ENOMEM; |
| goto err_dvb_net; |
| } |
| |
| ret = request_irq(pdev->irq, dm1105_irq, IRQF_SHARED, |
| DRIVER_NAME, dev); |
| if (ret < 0) |
| goto err_workqueue; |
| |
| return 0; |
| |
| err_workqueue: |
| destroy_workqueue(dev->wq); |
| err_dvb_net: |
| dvb_net_release(&dev->dvbnet); |
| err_disconnect_frontend: |
| dmx->disconnect_frontend(dmx); |
| err_remove_mem_frontend: |
| dmx->remove_frontend(dmx, &dev->mem_frontend); |
| err_remove_hw_frontend: |
| dmx->remove_frontend(dmx, &dev->hw_frontend); |
| err_dvb_dmxdev_release: |
| dvb_dmxdev_release(&dev->dmxdev); |
| err_dvb_dmx_release: |
| dvb_dmx_release(dvbdemux); |
| err_dvb_unregister_adapter: |
| dvb_unregister_adapter(dvb_adapter); |
| err_i2c_del_adapters: |
| i2c_del_adapter(&dev->i2c_bb_adap); |
| err_i2c_del_adapter: |
| i2c_del_adapter(&dev->i2c_adap); |
| err_dm1105_hw_exit: |
| dm1105_hw_exit(dev); |
| err_pci_iounmap: |
| pci_iounmap(pdev, dev->io_mem); |
| err_pci_release_regions: |
| pci_release_regions(pdev); |
| err_pci_disable_device: |
| pci_disable_device(pdev); |
| err_kfree: |
| kfree(dev); |
| return ret; |
| } |
| |
| static void dm1105_remove(struct pci_dev *pdev) |
| { |
| struct dm1105_dev *dev = pci_get_drvdata(pdev); |
| struct dvb_adapter *dvb_adapter = &dev->dvb_adapter; |
| struct dvb_demux *dvbdemux = &dev->demux; |
| struct dmx_demux *dmx = &dvbdemux->dmx; |
| |
| dm1105_ir_exit(dev); |
| dmx->close(dmx); |
| dvb_net_release(&dev->dvbnet); |
| if (dev->fe) |
| dvb_unregister_frontend(dev->fe); |
| |
| dmx->disconnect_frontend(dmx); |
| dmx->remove_frontend(dmx, &dev->mem_frontend); |
| dmx->remove_frontend(dmx, &dev->hw_frontend); |
| dvb_dmxdev_release(&dev->dmxdev); |
| dvb_dmx_release(dvbdemux); |
| dvb_unregister_adapter(dvb_adapter); |
| i2c_del_adapter(&dev->i2c_adap); |
| |
| dm1105_hw_exit(dev); |
| free_irq(pdev->irq, dev); |
| pci_iounmap(pdev, dev->io_mem); |
| pci_release_regions(pdev); |
| pci_disable_device(pdev); |
| dm1105_devcount--; |
| kfree(dev); |
| } |
| |
| static struct pci_device_id dm1105_id_table[] = { |
| { |
| .vendor = PCI_VENDOR_ID_TRIGEM, |
| .device = PCI_DEVICE_ID_DM1105, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| }, { |
| .vendor = PCI_VENDOR_ID_AXESS, |
| .device = PCI_DEVICE_ID_DM05, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| }, { |
| /* empty */ |
| }, |
| }; |
| |
| MODULE_DEVICE_TABLE(pci, dm1105_id_table); |
| |
| static struct pci_driver dm1105_driver = { |
| .name = DRIVER_NAME, |
| .id_table = dm1105_id_table, |
| .probe = dm1105_probe, |
| .remove = dm1105_remove, |
| }; |
| |
| module_pci_driver(dm1105_driver); |
| |
| MODULE_AUTHOR("Igor M. Liplianin <liplianin@me.by>"); |
| MODULE_DESCRIPTION("SDMC DM1105 DVB driver"); |
| MODULE_LICENSE("GPL"); |