arch/blackfin/mach-common/interrupt.S - LeafOS-Devices/android_kernel_samsung_gta4xl - Gitiles

 /*
  * File:         arch/blackfin/mach-common/interrupt.S
  * Based on:
  * Author:       D. Jeff Dionne <jeff@ryeham.ee.ryerson.ca>
  *               Kenneth Albanowski <kjahds@kjahds.com>
  *
  * Created:      ?
  * Description:  Interrupt Entries
  *
  * Modified:
  *               Copyright 2004-2006 Analog Devices Inc.
  *
  * Bugs:         Enter bugs at http://blackfin.uclinux.org/
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, see the file COPYING, or write
  * to the Free Software Foundation, Inc.,
  * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */

 #include <asm/blackfin.h>
 #include <mach/irq.h>
 #include <linux/linkage.h>
 #include <asm/entry.h>
 #include <asm/asm-offsets.h>
 #include <asm/trace.h>
 #include <asm/traps.h>
 #include <asm/thread_info.h>

 #include <asm/context.S>

 .extern _ret_from_exception

 #ifdef CONFIG_I_ENTRY_L1
 .section .l1.text
 #else
 .text
 #endif

 .align 4 	/* just in case */

 /* Common interrupt entry code.	 First we do CLI, then push
  * RETI, to keep interrupts disabled, but to allow this state to be changed
  * by local_bh_enable.
  * R0 contains the interrupt number, while R1 may contain the value of IPEND,
  * or garbage if IPEND won't be needed by the ISR.  */
 __common_int_entry:
 	[--sp] = fp;
 	[--sp] = usp;

 	[--sp] = i0;
 	[--sp] = i1;
 	[--sp] = i2;
 	[--sp] = i3;

 	[--sp] = m0;
 	[--sp] = m1;
 	[--sp] = m2;
 	[--sp] = m3;

 	[--sp] = l0;
 	[--sp] = l1;
 	[--sp] = l2;
 	[--sp] = l3;

 	[--sp] = b0;
 	[--sp] = b1;
 	[--sp] = b2;
 	[--sp] = b3;
 	[--sp] = a0.x;
 	[--sp] = a0.w;
 	[--sp] = a1.x;
 	[--sp] = a1.w;

 	[--sp] = LC0;
 	[--sp] = LC1;
 	[--sp] = LT0;
 	[--sp] = LT1;
 	[--sp] = LB0;
 	[--sp] = LB1;

 	[--sp] = ASTAT;

 	[--sp] = r0;	/* Skip reserved */
 	[--sp] = RETS;
 	r2 = RETI;
 	[--sp] = r2;
 	[--sp] = RETX;
 	[--sp] = RETN;
 	[--sp] = RETE;
 	[--sp] = SEQSTAT;
 	[--sp] = r1;	/* IPEND - R1 may or may not be set up before jumping here. */

 	/* Switch to other method of keeping interrupts disabled.  */
 #ifdef CONFIG_DEBUG_HWERR
 	r1 = 0x3f;
 	sti r1;
 #else
 	cli r1;
 #endif
 	[--sp] = RETI;  /* orig_pc */
 	/* Clear all L registers.  */
 	r1 = 0 (x);
 	l0 = r1;
 	l1 = r1;
 	l2 = r1;
 	l3 = r1;
 #ifdef CONFIG_FRAME_POINTER
 	fp = 0;
 #endif

 #if ANOMALY_05000283 || ANOMALY_05000315
 	cc = r7 == r7;
 	p5.h = HI(CHIPID);
 	p5.l = LO(CHIPID);
 	if cc jump 1f;
 	r7.l = W[p5];
 1:
 #endif
 	r1 =  sp;
 	SP += -12;
 #ifdef CONFIG_IPIPE
 	call ___ipipe_grab_irq
 	SP += 12;
 	cc = r0 == 0;
 	if cc jump .Lcommon_restore_context;
 #else /* CONFIG_IPIPE */
 	call _do_irq;
 	SP += 12;
 #endif /* CONFIG_IPIPE */
 	call _return_from_int;
 .Lcommon_restore_context:
 	RESTORE_CONTEXT
 	rti;

 /* interrupt routine for ivhw - 5 */
 ENTRY(_evt_ivhw)
 	/* In case a single action kicks off multiple memory transactions, (like
 	 * a cache line fetch, - this can cause multiple hardware errors, let's
 	 * catch them all. First - make sure all the actions are complete, and
 	 * the core sees the hardware errors.
 	 */
 	SSYNC;
 	SSYNC;

 	SAVE_ALL_SYS
 #ifdef CONFIG_FRAME_POINTER
 	fp = 0;
 #endif

 #if ANOMALY_05000283 || ANOMALY_05000315
 	cc = r7 == r7;
 	p5.h = HI(CHIPID);
 	p5.l = LO(CHIPID);
 	if cc jump 1f;
 	r7.l = W[p5];
 1:
 #endif

 	/* Handle all stacked hardware errors
 	 * To make sure we don't hang forever, only do it 10 times
 	 */
 	R0 = 0;
 	R2 = 10;
 1:
 	P0.L = LO(ILAT);
 	P0.H = HI(ILAT);
 	R1 = [P0];
 	CC = BITTST(R1, EVT_IVHW_P);
 	IF ! CC JUMP 2f;
 	/* OK a hardware error is pending - clear it */
 	R1 = EVT_IVHW_P;
 	[P0] = R1;
 	R0 += 1;
 	CC = R1 == R2;
 	if CC JUMP 2f;
 	JUMP 1b;
 2:
 	# We are going to dump something out, so make sure we print IPEND properly
 	p2.l = lo(IPEND);
 	p2.h = hi(IPEND);
 	r0 = [p2];
 	[sp + PT_IPEND] = r0;

 	/* set the EXCAUSE to HWERR for trap_c */
 	r0 = [sp + PT_SEQSTAT];
 	R1.L = LO(VEC_HWERR);
 	R1.H = HI(VEC_HWERR);
 	R0 = R0 | R1;
 	[sp + PT_SEQSTAT] = R0;

 	r0 = sp;        /* stack frame pt_regs pointer argument ==> r0 */
 	SP += -12;
 	call _trap_c;
 	SP += 12;

 #ifdef EBIU_ERRMST
 	/* make sure EBIU_ERRMST is clear */
 	p0.l = LO(EBIU_ERRMST);
 	p0.h = HI(EBIU_ERRMST);
 	r0.l = (CORE_ERROR | CORE_MERROR);
 	w[p0] = r0.l;
 #endif

 	call _ret_from_exception;

 .Lcommon_restore_all_sys:
 	RESTORE_ALL_SYS
 	rti;
 ENDPROC(_evt_ivhw)

 /* Interrupt routine for evt2 (NMI).
  * We don't actually use this, so just return.
  * For inner circle type details, please see:
  * http://docs.blackfin.uclinux.org/doku.php?id=linux-kernel:nmi
  */
 ENTRY(_evt_nmi)
 .weak _evt_nmi
 	rtn;
 ENDPROC(_evt_nmi)

 /* interrupt routine for core timer - 6 */
 ENTRY(_evt_timer)
 	TIMER_INTERRUPT_ENTRY(EVT_IVTMR_P)

 /* interrupt routine for evt7 - 7 */
 ENTRY(_evt_evt7)
 	INTERRUPT_ENTRY(EVT_IVG7_P)
 ENTRY(_evt_evt8)
 	INTERRUPT_ENTRY(EVT_IVG8_P)
 ENTRY(_evt_evt9)
 	INTERRUPT_ENTRY(EVT_IVG9_P)
 ENTRY(_evt_evt10)
 	INTERRUPT_ENTRY(EVT_IVG10_P)
 ENTRY(_evt_evt11)
 	INTERRUPT_ENTRY(EVT_IVG11_P)
 ENTRY(_evt_evt12)
 	INTERRUPT_ENTRY(EVT_IVG12_P)
 ENTRY(_evt_evt13)
 	INTERRUPT_ENTRY(EVT_IVG13_P)


  /* interrupt routine for system_call - 15 */
 ENTRY(_evt_system_call)
 	SAVE_CONTEXT_SYSCALL
 #ifdef CONFIG_FRAME_POINTER
 	fp = 0;
 #endif
 	call _system_call;
 	jump .Lcommon_restore_context;
 ENDPROC(_evt_system_call)

 #ifdef CONFIG_IPIPE
 ENTRY(___ipipe_call_irqtail)
 	p0 = r0;
 	r0.l = 1f;
 	r0.h = 1f;
 	reti = r0;
 	rti;
 1:
 	[--sp] = rets;
 	[--sp] = ( r7:4, p5:3 );
 	sp += -12;
 	call (p0);
 	sp += 12;
 	( r7:4, p5:3 ) = [sp++];
 	rets = [sp++];

 	[--sp] = reti;
 	reti = [sp++];          /* IRQs are off. */
 	r0.h = 3f;
 	r0.l = 3f;
 	p0.l = lo(EVT14);
 	p0.h = hi(EVT14);
 	[p0] = r0;
 	csync;
 	r0 = 0x401f (z);
 	sti r0;
 	raise 14;
 	[--sp] = reti;          /* IRQs on. */
 2:
 	jump 2b;                /* Likely paranoid. */
 3:
 	sp += 4;                /* Discard saved RETI */
 	r0.h = _evt14_softirq;
 	r0.l = _evt14_softirq;
 	p0.l = lo(EVT14);
 	p0.h = hi(EVT14);
 	[p0] = r0;
 	csync;
 	p0.l = _bfin_irq_flags;
 	p0.h = _bfin_irq_flags;
 	r0 = [p0];
 	sti r0;
 	rts;
 ENDPROC(___ipipe_call_irqtail)

 #endif /* CONFIG_IPIPE */
	/*
	* File: arch/blackfin/mach-common/interrupt.S
	* Based on:
	* Author: D. Jeff Dionne <jeff@ryeham.ee.ryerson.ca>
	* Kenneth Albanowski <kjahds@kjahds.com>
	*
	* Created: ?
	* Description: Interrupt Entries
	*
	* Modified:
	* Copyright 2004-2006 Analog Devices Inc.
	*
	* Bugs: Enter bugs at http://blackfin.uclinux.org/
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License as published by
	* the Free Software Foundation; either version 2 of the License, or
	* (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, see the file COPYING, or write
	* to the Free Software Foundation, Inc.,
	* 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
	*/

	#include <asm/blackfin.h>
	#include <mach/irq.h>
	#include <linux/linkage.h>
	#include <asm/entry.h>
	#include <asm/asm-offsets.h>
	#include <asm/trace.h>
	#include <asm/traps.h>
	#include <asm/thread_info.h>

	#include <asm/context.S>

	.extern _ret_from_exception

	#ifdef CONFIG_I_ENTRY_L1
	.section .l1.text
	#else
	.text
	#endif

	.align 4 /* just in case */

	/* Common interrupt entry code. First we do CLI, then push
	* RETI, to keep interrupts disabled, but to allow this state to be changed
	* by local_bh_enable.
	* R0 contains the interrupt number, while R1 may contain the value of IPEND,
	* or garbage if IPEND won't be needed by the ISR. */
	__common_int_entry:
	[--sp] = fp;
	[--sp] = usp;

	[--sp] = i0;
	[--sp] = i1;
	[--sp] = i2;
	[--sp] = i3;

	[--sp] = m0;
	[--sp] = m1;
	[--sp] = m2;
	[--sp] = m3;

	[--sp] = l0;
	[--sp] = l1;
	[--sp] = l2;
	[--sp] = l3;

	[--sp] = b0;
	[--sp] = b1;
	[--sp] = b2;
	[--sp] = b3;
	[--sp] = a0.x;
	[--sp] = a0.w;
	[--sp] = a1.x;
	[--sp] = a1.w;

	[--sp] = LC0;
	[--sp] = LC1;
	[--sp] = LT0;
	[--sp] = LT1;
	[--sp] = LB0;
	[--sp] = LB1;

	[--sp] = ASTAT;

	[--sp] = r0; /* Skip reserved */
	[--sp] = RETS;
	r2 = RETI;
	[--sp] = r2;
	[--sp] = RETX;
	[--sp] = RETN;
	[--sp] = RETE;
	[--sp] = SEQSTAT;
	[--sp] = r1; /* IPEND - R1 may or may not be set up before jumping here. */

	/* Switch to other method of keeping interrupts disabled. */
	#ifdef CONFIG_DEBUG_HWERR
	r1 = 0x3f;
	sti r1;
	#else
	cli r1;
	#endif
	[--sp] = RETI; /* orig_pc */
	/* Clear all L registers. */
	r1 = 0 (x);
	l0 = r1;
	l1 = r1;
	l2 = r1;
	l3 = r1;
	#ifdef CONFIG_FRAME_POINTER
	fp = 0;
	#endif

	#if ANOMALY_05000283 \|\| ANOMALY_05000315
	cc = r7 == r7;
	p5.h = HI(CHIPID);
	p5.l = LO(CHIPID);
	if cc jump 1f;
	r7.l = W[p5];
	1:
	#endif
	r1 = sp;
	SP += -12;
	#ifdef CONFIG_IPIPE
	call ___ipipe_grab_irq
	SP += 12;
	cc = r0 == 0;
	if cc jump .Lcommon_restore_context;
	#else /* CONFIG_IPIPE */
	call _do_irq;
	SP += 12;
	#endif /* CONFIG_IPIPE */
	call _return_from_int;
	.Lcommon_restore_context:
	RESTORE_CONTEXT
	rti;

	/* interrupt routine for ivhw - 5 */
	ENTRY(_evt_ivhw)
	/* In case a single action kicks off multiple memory transactions, (like
	* a cache line fetch, - this can cause multiple hardware errors, let's
	* catch them all. First - make sure all the actions are complete, and
	* the core sees the hardware errors.
	*/
	SSYNC;
	SSYNC;

	SAVE_ALL_SYS
	#ifdef CONFIG_FRAME_POINTER
	fp = 0;
	#endif

	#if ANOMALY_05000283 \|\| ANOMALY_05000315
	cc = r7 == r7;
	p5.h = HI(CHIPID);
	p5.l = LO(CHIPID);
	if cc jump 1f;
	r7.l = W[p5];
	1:
	#endif

	/* Handle all stacked hardware errors
	* To make sure we don't hang forever, only do it 10 times
	*/
	R0 = 0;
	R2 = 10;
	1:
	P0.L = LO(ILAT);
	P0.H = HI(ILAT);
	R1 = [P0];
	CC = BITTST(R1, EVT_IVHW_P);
	IF ! CC JUMP 2f;
	/* OK a hardware error is pending - clear it */
	R1 = EVT_IVHW_P;
	[P0] = R1;
	R0 += 1;
	CC = R1 == R2;
	if CC JUMP 2f;
	JUMP 1b;
	2:
	# We are going to dump something out, so make sure we print IPEND properly
	p2.l = lo(IPEND);
	p2.h = hi(IPEND);
	r0 = [p2];
	[sp + PT_IPEND] = r0;

	/* set the EXCAUSE to HWERR for trap_c */
	r0 = [sp + PT_SEQSTAT];
	R1.L = LO(VEC_HWERR);
	R1.H = HI(VEC_HWERR);
	R0 = R0 \| R1;
	[sp + PT_SEQSTAT] = R0;

	r0 = sp; /* stack frame pt_regs pointer argument ==> r0 */
	SP += -12;
	call _trap_c;
	SP += 12;

	#ifdef EBIU_ERRMST
	/* make sure EBIU_ERRMST is clear */
	p0.l = LO(EBIU_ERRMST);
	p0.h = HI(EBIU_ERRMST);
	r0.l = (CORE_ERROR \| CORE_MERROR);
	w[p0] = r0.l;
	#endif

	call _ret_from_exception;

	.Lcommon_restore_all_sys:
	RESTORE_ALL_SYS
	rti;
	ENDPROC(_evt_ivhw)

	/* Interrupt routine for evt2 (NMI).
	* We don't actually use this, so just return.
	* For inner circle type details, please see:
	* http://docs.blackfin.uclinux.org/doku.php?id=linux-kernel:nmi
	*/
	ENTRY(_evt_nmi)
	.weak _evt_nmi
	rtn;
	ENDPROC(_evt_nmi)

	/* interrupt routine for core timer - 6 */
	ENTRY(_evt_timer)
	TIMER_INTERRUPT_ENTRY(EVT_IVTMR_P)

	/* interrupt routine for evt7 - 7 */
	ENTRY(_evt_evt7)
	INTERRUPT_ENTRY(EVT_IVG7_P)
	ENTRY(_evt_evt8)
	INTERRUPT_ENTRY(EVT_IVG8_P)
	ENTRY(_evt_evt9)
	INTERRUPT_ENTRY(EVT_IVG9_P)
	ENTRY(_evt_evt10)
	INTERRUPT_ENTRY(EVT_IVG10_P)
	ENTRY(_evt_evt11)
	INTERRUPT_ENTRY(EVT_IVG11_P)
	ENTRY(_evt_evt12)
	INTERRUPT_ENTRY(EVT_IVG12_P)
	ENTRY(_evt_evt13)
	INTERRUPT_ENTRY(EVT_IVG13_P)


	/* interrupt routine for system_call - 15 */
	ENTRY(_evt_system_call)
	SAVE_CONTEXT_SYSCALL
	#ifdef CONFIG_FRAME_POINTER
	fp = 0;
	#endif
	call _system_call;
	jump .Lcommon_restore_context;
	ENDPROC(_evt_system_call)

	#ifdef CONFIG_IPIPE
	ENTRY(___ipipe_call_irqtail)
	p0 = r0;
	r0.l = 1f;
	r0.h = 1f;
	reti = r0;
	rti;
	1:
	[--sp] = rets;
	[--sp] = ( r7:4, p5:3 );
	sp += -12;
	call (p0);
	sp += 12;
	( r7:4, p5:3 ) = [sp++];
	rets = [sp++];

	[--sp] = reti;
	reti = [sp++]; /* IRQs are off. */
	r0.h = 3f;
	r0.l = 3f;
	p0.l = lo(EVT14);
	p0.h = hi(EVT14);
	[p0] = r0;
	csync;
	r0 = 0x401f (z);
	sti r0;
	raise 14;
	[--sp] = reti; /* IRQs on. */
	2:
	jump 2b; /* Likely paranoid. */
	3:
	sp += 4; /* Discard saved RETI */
	r0.h = _evt14_softirq;
	r0.l = _evt14_softirq;
	p0.l = lo(EVT14);
	p0.h = hi(EVT14);
	[p0] = r0;
	csync;
	p0.l = _bfin_irq_flags;
	p0.h = _bfin_irq_flags;
	r0 = [p0];
	sti r0;
	rts;
	ENDPROC(___ipipe_call_irqtail)

	#endif /* CONFIG_IPIPE */