arch/arm/boot/dts/lpc32xx.dtsi - LeafOS-Devices/android_kernel_samsung_gta4xl - Gitiles

 /*
  * NXP LPC32xx SoC
  *
  * Copyright 2012 Roland Stigge <stigge@antcom.de>
  *
  * The code contained herein is licensed under the GNU General Public
  * License. You may obtain a copy of the GNU General Public License
  * Version 2 or later at the following locations:
  *
  * http://www.opensource.org/licenses/gpl-license.html
  * http://www.gnu.org/copyleft/gpl.html
  */

 #include "skeleton.dtsi"

 #include <dt-bindings/clock/lpc32xx-clock.h>
 #include <dt-bindings/interrupt-controller/irq.h>

 / {
 	compatible = "nxp,lpc3220";
 	interrupt-parent = <&mic>;

 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;

 		cpu@0 {
 			compatible = "arm,arm926ej-s";
 			device_type = "cpu";
 			reg = <0x0>;
 		};
 	};

 	clocks {
 		xtal_32k: xtal_32k {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <32768>;
 			clock-output-names = "xtal_32k";
 		};

 		xtal: xtal {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <13000000>;
 			clock-output-names = "xtal";
 		};
 	};

 	ahb {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "simple-bus";
 		ranges = <0x00000000 0x00000000 0x10000000>,
 			 <0x20000000 0x20000000 0x30000000>,
 			 <0xe0000000 0xe0000000 0x04000000>;

 		iram: sram@08000000 {
 			compatible = "mmio-sram";
 			reg = <0x08000000 0x20000>;

 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x00000000 0x08000000 0x20000>;
 		};

 		/*
 		 * Enable either SLC or MLC
 		 */
 		slc: flash@20020000 {
 			compatible = "nxp,lpc3220-slc";
 			reg = <0x20020000 0x1000>;
 			clocks = <&clk LPC32XX_CLK_SLC>;
 			status = "disabled";
 		};

 		mlc: flash@200a8000 {
 			compatible = "nxp,lpc3220-mlc";
 			reg = <0x200a8000 0x11000>;
 			interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clk LPC32XX_CLK_MLC>;
 			status = "disabled";
 		};

 		dma: dma@31000000 {
 			compatible = "arm,pl080", "arm,primecell";
 			reg = <0x31000000 0x1000>;
 			interrupts = <28 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clk LPC32XX_CLK_DMA>;
 			clock-names = "apb_pclk";
 		};

 		usb {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			compatible = "simple-bus";
 			ranges = <0x0 0x31020000 0x00001000>;

 			/*
 			 * Enable either ohci or usbd (gadget)!
 			 */
 			ohci: ohci@0 {
 				compatible = "nxp,ohci-nxp", "usb-ohci";
 				reg = <0x0 0x300>;
 				interrupt-parent = <&sic1>;
 				interrupts = <27 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&usbclk LPC32XX_USB_CLK_HOST>;
 				status = "disabled";
 			};

 			usbd: usbd@0 {
 				compatible = "nxp,lpc3220-udc";
 				reg = <0x0 0x300>;
 				interrupt-parent = <&sic1>;
 				interrupts = <29 IRQ_TYPE_LEVEL_HIGH>,
 					     <30 IRQ_TYPE_LEVEL_HIGH>,
 					     <28 IRQ_TYPE_LEVEL_HIGH>,
 					     <26 IRQ_TYPE_LEVEL_LOW>;
 				clocks = <&usbclk LPC32XX_USB_CLK_DEVICE>;
 				status = "disabled";
 			};

 			i2cusb: i2c@300 {
 				compatible = "nxp,pnx-i2c";
 				reg = <0x300 0x100>;
 				interrupt-parent = <&sic1>;
 				interrupts = <31 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&usbclk LPC32XX_USB_CLK_I2C>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				pnx,timeout = <0x64>;
 			};

 			usbclk: clock-controller@f00 {
 				compatible = "nxp,lpc3220-usb-clk";
 				reg = <0xf00 0x100>;
 				#clock-cells = <1>;
 			};
 		};

 		clcd: clcd@31040000 {
 			compatible = "arm,pl111", "arm,primecell";
 			reg = <0x31040000 0x1000>;
 			interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clk LPC32XX_CLK_LCD>, <&clk LPC32XX_CLK_LCD>;
 			clock-names = "clcdclk", "apb_pclk";
 			status = "disabled";
 		};

 		mac: ethernet@31060000 {
 			compatible = "nxp,lpc-eth";
 			reg = <0x31060000 0x1000>;
 			interrupts = <29 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clk LPC32XX_CLK_MAC>;
 		};

 		emc: memory-controller@31080000 {
 			compatible = "arm,pl175", "arm,primecell";
 			reg = <0x31080000 0x1000>;
 			clocks = <&clk LPC32XX_CLK_DDRAM>, <&clk LPC32XX_CLK_DDRAM>;
 			clock-names = "mpmcclk", "apb_pclk";
 			#address-cells = <1>;
 			#size-cells = <1>;

 			ranges = <0 0xe0000000 0x01000000>,
 				 <1 0xe1000000 0x01000000>,
 				 <2 0xe2000000 0x01000000>,
 				 <3 0xe3000000 0x01000000>;
 			status = "disabled";
 		};

 		apb {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			compatible = "simple-bus";
 			ranges = <0x20000000 0x20000000 0x30000000>;

 			/*
 			 * ssp0 and spi1 are shared pins;
 			 * enable one in your board dts, as needed.
 			 */
 			ssp0: spi@20084000 {
 				compatible = "arm,pl022", "arm,primecell";
 				reg = <0x20084000 0x1000>;
 				interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk LPC32XX_CLK_SSP0>;
 				clock-names = "apb_pclk";
 				status = "disabled";
 			};

 			spi1: spi@20088000 {
 				compatible = "nxp,lpc3220-spi";
 				reg = <0x20088000 0x1000>;
 				clocks = <&clk LPC32XX_CLK_SPI1>;
 				status = "disabled";
 			};

 			/*
 			 * ssp1 and spi2 are shared pins;
 			 * enable one in your board dts, as needed.
 			 */
 			ssp1: spi@2008c000 {
 				compatible = "arm,pl022", "arm,primecell";
 				reg = <0x2008c000 0x1000>;
 				interrupts = <21 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk LPC32XX_CLK_SSP1>;
 				clock-names = "apb_pclk";
 				status = "disabled";
 			};

 			spi2: spi@20090000 {
 				compatible = "nxp,lpc3220-spi";
 				reg = <0x20090000 0x1000>;
 				clocks = <&clk LPC32XX_CLK_SPI2>;
 				status = "disabled";
 			};

 			i2s0: i2s@20094000 {
 				compatible = "nxp,lpc3220-i2s";
 				reg = <0x20094000 0x1000>;
 			};

 			sd: sd@20098000 {
 				compatible = "arm,pl18x", "arm,primecell";
 				reg = <0x20098000 0x1000>;
 				interrupts = <15 IRQ_TYPE_LEVEL_HIGH>,
 					     <13 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk LPC32XX_CLK_SD>;
 				clock-names = "apb_pclk";
 				status = "disabled";
 			};

 			i2s1: i2s@2009c000 {
 				compatible = "nxp,lpc3220-i2s";
 				reg = <0x2009C000 0x1000>;
 			};

 			/* UART5 first since it is the default console, ttyS0 */
 			uart5: serial@40090000 {
 				/* actually, ns16550a w/ 64 byte fifos! */
 				compatible = "nxp,lpc3220-uart";
 				reg = <0x40090000 0x1000>;
 				interrupts = <9 IRQ_TYPE_LEVEL_HIGH>;
 				reg-shift = <2>;
 				clocks = <&clk LPC32XX_CLK_UART5>;
 				status = "disabled";
 			};

 			uart3: serial@40080000 {
 				compatible = "nxp,lpc3220-uart";
 				reg = <0x40080000 0x1000>;
 				interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
 				reg-shift = <2>;
 				clocks = <&clk LPC32XX_CLK_UART3>;
 				status = "disabled";
 			};

 			uart4: serial@40088000 {
 				compatible = "nxp,lpc3220-uart";
 				reg = <0x40088000 0x1000>;
 				interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
 				reg-shift = <2>;
 				clocks = <&clk LPC32XX_CLK_UART4>;
 				status = "disabled";
 			};

 			uart6: serial@40098000 {
 				compatible = "nxp,lpc3220-uart";
 				reg = <0x40098000 0x1000>;
 				interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
 				reg-shift = <2>;
 				clocks = <&clk LPC32XX_CLK_UART6>;
 				status = "disabled";
 			};

 			i2c1: i2c@400a0000 {
 				compatible = "nxp,pnx-i2c";
 				reg = <0x400A0000 0x100>;
 				interrupt-parent = <&sic1>;
 				interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				pnx,timeout = <0x64>;
 				clocks = <&clk LPC32XX_CLK_I2C1>;
 			};

 			i2c2: i2c@400a8000 {
 				compatible = "nxp,pnx-i2c";
 				reg = <0x400A8000 0x100>;
 				interrupt-parent = <&sic1>;
 				interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				pnx,timeout = <0x64>;
 				clocks = <&clk LPC32XX_CLK_I2C2>;
 			};

 			mpwm: mpwm@400e8000 {
 				compatible = "nxp,lpc3220-motor-pwm";
 				reg = <0x400E8000 0x78>;
 				status = "disabled";
 				#pwm-cells = <2>;
 			};
 		};

 		fab {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			compatible = "simple-bus";
 			ranges = <0x20000000 0x20000000 0x30000000>;

 			/* System Control Block */
 			scb {
 				compatible = "simple-bus";
 				ranges = <0x0 0x040004000 0x00001000>;
 				#address-cells = <1>;
 				#size-cells = <1>;

 				clk: clock-controller@0 {
 					compatible = "nxp,lpc3220-clk";
 					reg = <0x00 0x114>;
 					#clock-cells = <1>;

 					clocks = <&xtal_32k>, <&xtal>;
 					clock-names = "xtal_32k", "xtal";
 				};
 			};

 			mic: interrupt-controller@40008000 {
 				compatible = "nxp,lpc3220-mic";
 				reg = <0x40008000 0x4000>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 			};

 			sic1: interrupt-controller@4000c000 {
 				compatible = "nxp,lpc3220-sic";
 				reg = <0x4000c000 0x4000>;
 				interrupt-controller;
 				#interrupt-cells = <2>;

 				interrupt-parent = <&mic>;
 				interrupts = <0 IRQ_TYPE_LEVEL_LOW>,
 					     <30 IRQ_TYPE_LEVEL_LOW>;
 				};

 			sic2: interrupt-controller@40010000 {
 				compatible = "nxp,lpc3220-sic";
 				reg = <0x40010000 0x4000>;
 				interrupt-controller;
 				#interrupt-cells = <2>;

 				interrupt-parent = <&mic>;
 				interrupts = <1 IRQ_TYPE_LEVEL_LOW>,
 					     <31 IRQ_TYPE_LEVEL_LOW>;
 			};

 			uart1: serial@40014000 {
 				compatible = "nxp,lpc3220-hsuart";
 				reg = <0x40014000 0x1000>;
 				interrupts = <26 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};

 			uart2: serial@40018000 {
 				compatible = "nxp,lpc3220-hsuart";
 				reg = <0x40018000 0x1000>;
 				interrupts = <25 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};

 			uart7: serial@4001c000 {
 				compatible = "nxp,lpc3220-hsuart";
 				reg = <0x4001c000 0x1000>;
 				interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};

 			rtc: rtc@40024000 {
 				compatible = "nxp,lpc3220-rtc";
 				reg = <0x40024000 0x1000>;
 				interrupt-parent = <&sic1>;
 				interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk LPC32XX_CLK_RTC>;
 			};

 			gpio: gpio@40028000 {
 				compatible = "nxp,lpc3220-gpio";
 				reg = <0x40028000 0x1000>;
 				gpio-controller;
 				#gpio-cells = <3>; /* bank, pin, flags */
 			};

 			timer4: timer@4002c000 {
 				compatible = "nxp,lpc3220-timer";
 				reg = <0x4002C000 0x1000>;
 				interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
 				clocks = <&clk LPC32XX_CLK_TIMER4>;
 				clock-names = "timerclk";
 				status = "disabled";
 			};

 			timer5: timer@40030000 {
 				compatible = "nxp,lpc3220-timer";
 				reg = <0x40030000 0x1000>;
 				interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
 				clocks = <&clk LPC32XX_CLK_TIMER5>;
 				clock-names = "timerclk";
 				status = "disabled";
 			};

 			watchdog: watchdog@4003c000 {
 				compatible = "nxp,pnx4008-wdt";
 				reg = <0x4003C000 0x1000>;
 				clocks = <&clk LPC32XX_CLK_WDOG>;
 			};

 			timer0: timer@40044000 {
 				compatible = "nxp,lpc3220-timer";
 				reg = <0x40044000 0x1000>;
 				clocks = <&clk LPC32XX_CLK_TIMER0>;
 				clock-names = "timerclk";
 				interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
 			};

 			/*
 			 * TSC vs. ADC: Since those two share the same
 			 * hardware, you need to choose from one of the
 			 * following two and do 'status = "okay";' for one of
 			 * them
 			 */

 			adc: adc@40048000 {
 				compatible = "nxp,lpc3220-adc";
 				reg = <0x40048000 0x1000>;
 				interrupt-parent = <&sic1>;
 				interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk LPC32XX_CLK_ADC>;
 				status = "disabled";
 			};

 			tsc: tsc@40048000 {
 				compatible = "nxp,lpc3220-tsc";
 				reg = <0x40048000 0x1000>;
 				interrupt-parent = <&sic1>;
 				interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk LPC32XX_CLK_ADC>;
 				status = "disabled";
 			};

 			timer1: timer@4004c000 {
 				compatible = "nxp,lpc3220-timer";
 				reg = <0x4004C000 0x1000>;
 				interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
 				clocks = <&clk LPC32XX_CLK_TIMER1>;
 				clock-names = "timerclk";
 			};

 			key: key@40050000 {
 				compatible = "nxp,lpc3220-key";
 				reg = <0x40050000 0x1000>;
 				clocks = <&clk LPC32XX_CLK_KEY>;
 				interrupt-parent = <&sic1>;
 				interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};

 			timer2: timer@40058000 {
 				compatible = "nxp,lpc3220-timer";
 				reg = <0x40058000 0x1000>;
 				interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
 				clocks = <&clk LPC32XX_CLK_TIMER2>;
 				clock-names = "timerclk";
 				status = "disabled";
 			};

 			pwm1: pwm@4005c000 {
 				compatible = "nxp,lpc3220-pwm";
 				reg = <0x4005C000 0x4>;
 				clocks = <&clk LPC32XX_CLK_PWM1>;
 				assigned-clocks = <&clk LPC32XX_CLK_PWM1>;
 				assigned-clock-parents = <&clk LPC32XX_CLK_PERIPH>;
 				status = "disabled";
 			};

 			pwm2: pwm@4005c004 {
 				compatible = "nxp,lpc3220-pwm";
 				reg = <0x4005C004 0x4>;
 				clocks = <&clk LPC32XX_CLK_PWM2>;
 				assigned-clocks = <&clk LPC32XX_CLK_PWM2>;
 				assigned-clock-parents = <&clk LPC32XX_CLK_PERIPH>;
 				status = "disabled";
 			};

 			timer3: timer@40060000 {
 				compatible = "nxp,lpc3220-timer";
 				reg = <0x40060000 0x1000>;
 				interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
 				clocks = <&clk LPC32XX_CLK_TIMER3>;
 				clock-names = "timerclk";
 				status = "disabled";
 			};
 		};
 	};
 };
	/*
	* NXP LPC32xx SoC
	*
	* Copyright 2012 Roland Stigge <stigge@antcom.de>
	*
	* The code contained herein is licensed under the GNU General Public
	* License. You may obtain a copy of the GNU General Public License
	* Version 2 or later at the following locations:
	*
	* http://www.opensource.org/licenses/gpl-license.html
	* http://www.gnu.org/copyleft/gpl.html
	*/

	#include "skeleton.dtsi"

	#include <dt-bindings/clock/lpc32xx-clock.h>
	#include <dt-bindings/interrupt-controller/irq.h>

	/ {
	compatible = "nxp,lpc3220";
	interrupt-parent = <&mic>;

	cpus {
	#address-cells = <1>;
	#size-cells = <0>;

	cpu@0 {
	compatible = "arm,arm926ej-s";
	device_type = "cpu";
	reg = <0x0>;
	};
	};

	clocks {
	xtal_32k: xtal_32k {
	compatible = "fixed-clock";
	#clock-cells = <0>;
	clock-frequency = <32768>;
	clock-output-names = "xtal_32k";
	};

	xtal: xtal {
	compatible = "fixed-clock";
	#clock-cells = <0>;
	clock-frequency = <13000000>;
	clock-output-names = "xtal";
	};
	};

	ahb {
	#address-cells = <1>;
	#size-cells = <1>;
	compatible = "simple-bus";
	ranges = <0x00000000 0x00000000 0x10000000>,
	<0x20000000 0x20000000 0x30000000>,
	<0xe0000000 0xe0000000 0x04000000>;

	iram: sram@08000000 {
	compatible = "mmio-sram";
	reg = <0x08000000 0x20000>;

	#address-cells = <1>;
	#size-cells = <1>;
	ranges = <0x00000000 0x08000000 0x20000>;
	};

	/*
	* Enable either SLC or MLC
	*/
	slc: flash@20020000 {
	compatible = "nxp,lpc3220-slc";
	reg = <0x20020000 0x1000>;
	clocks = <&clk LPC32XX_CLK_SLC>;
	status = "disabled";
	};

	mlc: flash@200a8000 {
	compatible = "nxp,lpc3220-mlc";
	reg = <0x200a8000 0x11000>;
	interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
	clocks = <&clk LPC32XX_CLK_MLC>;
	status = "disabled";
	};

	dma: dma@31000000 {
	compatible = "arm,pl080", "arm,primecell";
	reg = <0x31000000 0x1000>;
	interrupts = <28 IRQ_TYPE_LEVEL_HIGH>;
	clocks = <&clk LPC32XX_CLK_DMA>;
	clock-names = "apb_pclk";
	};

	usb {
	#address-cells = <1>;
	#size-cells = <1>;
	compatible = "simple-bus";
	ranges = <0x0 0x31020000 0x00001000>;

	/*
	* Enable either ohci or usbd (gadget)!
	*/
	ohci: ohci@0 {
	compatible = "nxp,ohci-nxp", "usb-ohci";
	reg = <0x0 0x300>;
	interrupt-parent = <&sic1>;
	interrupts = <27 IRQ_TYPE_LEVEL_HIGH>;
	clocks = <&usbclk LPC32XX_USB_CLK_HOST>;
	status = "disabled";
	};

	usbd: usbd@0 {
	compatible = "nxp,lpc3220-udc";
	reg = <0x0 0x300>;
	interrupt-parent = <&sic1>;
	interrupts = <29 IRQ_TYPE_LEVEL_HIGH>,
	<30 IRQ_TYPE_LEVEL_HIGH>,
	<28 IRQ_TYPE_LEVEL_HIGH>,
	<26 IRQ_TYPE_LEVEL_LOW>;
	clocks = <&usbclk LPC32XX_USB_CLK_DEVICE>;
	status = "disabled";
	};

	i2cusb: i2c@300 {
	compatible = "nxp,pnx-i2c";
	reg = <0x300 0x100>;
	interrupt-parent = <&sic1>;
	interrupts = <31 IRQ_TYPE_LEVEL_HIGH>;
	clocks = <&usbclk LPC32XX_USB_CLK_I2C>;
	#address-cells = <1>;
	#size-cells = <0>;
	pnx,timeout = <0x64>;
	};

	usbclk: clock-controller@f00 {
	compatible = "nxp,lpc3220-usb-clk";
	reg = <0xf00 0x100>;
	#clock-cells = <1>;
	};
	};

	clcd: clcd@31040000 {
	compatible = "arm,pl111", "arm,primecell";
	reg = <0x31040000 0x1000>;
	interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
	clocks = <&clk LPC32XX_CLK_LCD>, <&clk LPC32XX_CLK_LCD>;
	clock-names = "clcdclk", "apb_pclk";
	status = "disabled";
	};

	mac: ethernet@31060000 {
	compatible = "nxp,lpc-eth";
	reg = <0x31060000 0x1000>;
	interrupts = <29 IRQ_TYPE_LEVEL_HIGH>;
	clocks = <&clk LPC32XX_CLK_MAC>;
	};

	emc: memory-controller@31080000 {
	compatible = "arm,pl175", "arm,primecell";
	reg = <0x31080000 0x1000>;
	clocks = <&clk LPC32XX_CLK_DDRAM>, <&clk LPC32XX_CLK_DDRAM>;
	clock-names = "mpmcclk", "apb_pclk";
	#address-cells = <1>;
	#size-cells = <1>;

	ranges = <0 0xe0000000 0x01000000>,
	<1 0xe1000000 0x01000000>,
	<2 0xe2000000 0x01000000>,
	<3 0xe3000000 0x01000000>;
	status = "disabled";
	};

	apb {
	#address-cells = <1>;
	#size-cells = <1>;
	compatible = "simple-bus";
	ranges = <0x20000000 0x20000000 0x30000000>;

	/*
	* ssp0 and spi1 are shared pins;
	* enable one in your board dts, as needed.
	*/
	ssp0: spi@20084000 {
	compatible = "arm,pl022", "arm,primecell";
	reg = <0x20084000 0x1000>;
	interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
	clocks = <&clk LPC32XX_CLK_SSP0>;
	clock-names = "apb_pclk";
	status = "disabled";
	};

	spi1: spi@20088000 {
	compatible = "nxp,lpc3220-spi";
	reg = <0x20088000 0x1000>;
	clocks = <&clk LPC32XX_CLK_SPI1>;
	status = "disabled";
	};

	/*
	* ssp1 and spi2 are shared pins;
	* enable one in your board dts, as needed.
	*/
	ssp1: spi@2008c000 {
	compatible = "arm,pl022", "arm,primecell";
	reg = <0x2008c000 0x1000>;
	interrupts = <21 IRQ_TYPE_LEVEL_HIGH>;
	clocks = <&clk LPC32XX_CLK_SSP1>;
	clock-names = "apb_pclk";
	status = "disabled";
	};

	spi2: spi@20090000 {
	compatible = "nxp,lpc3220-spi";
	reg = <0x20090000 0x1000>;
	clocks = <&clk LPC32XX_CLK_SPI2>;
	status = "disabled";
	};

	i2s0: i2s@20094000 {
	compatible = "nxp,lpc3220-i2s";
	reg = <0x20094000 0x1000>;
	};

	sd: sd@20098000 {
	compatible = "arm,pl18x", "arm,primecell";
	reg = <0x20098000 0x1000>;
	interrupts = <15 IRQ_TYPE_LEVEL_HIGH>,
	<13 IRQ_TYPE_LEVEL_HIGH>;
	clocks = <&clk LPC32XX_CLK_SD>;
	clock-names = "apb_pclk";
	status = "disabled";
	};

	i2s1: i2s@2009c000 {
	compatible = "nxp,lpc3220-i2s";
	reg = <0x2009C000 0x1000>;
	};

	/* UART5 first since it is the default console, ttyS0 */
	uart5: serial@40090000 {
	/* actually, ns16550a w/ 64 byte fifos! */
	compatible = "nxp,lpc3220-uart";
	reg = <0x40090000 0x1000>;
	interrupts = <9 IRQ_TYPE_LEVEL_HIGH>;
	reg-shift = <2>;
	clocks = <&clk LPC32XX_CLK_UART5>;
	status = "disabled";
	};

	uart3: serial@40080000 {
	compatible = "nxp,lpc3220-uart";
	reg = <0x40080000 0x1000>;
	interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
	reg-shift = <2>;
	clocks = <&clk LPC32XX_CLK_UART3>;
	status = "disabled";
	};

	uart4: serial@40088000 {
	compatible = "nxp,lpc3220-uart";
	reg = <0x40088000 0x1000>;
	interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
	reg-shift = <2>;
	clocks = <&clk LPC32XX_CLK_UART4>;
	status = "disabled";
	};

	uart6: serial@40098000 {
	compatible = "nxp,lpc3220-uart";
	reg = <0x40098000 0x1000>;
	interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
	reg-shift = <2>;
	clocks = <&clk LPC32XX_CLK_UART6>;
	status = "disabled";
	};

	i2c1: i2c@400a0000 {
	compatible = "nxp,pnx-i2c";
	reg = <0x400A0000 0x100>;
	interrupt-parent = <&sic1>;
	interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
	#address-cells = <1>;
	#size-cells = <0>;
	pnx,timeout = <0x64>;
	clocks = <&clk LPC32XX_CLK_I2C1>;
	};

	i2c2: i2c@400a8000 {
	compatible = "nxp,pnx-i2c";
	reg = <0x400A8000 0x100>;
	interrupt-parent = <&sic1>;
	interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
	#address-cells = <1>;
	#size-cells = <0>;
	pnx,timeout = <0x64>;
	clocks = <&clk LPC32XX_CLK_I2C2>;
	};

	mpwm: mpwm@400e8000 {
	compatible = "nxp,lpc3220-motor-pwm";
	reg = <0x400E8000 0x78>;
	status = "disabled";
	#pwm-cells = <2>;
	};
	};

	fab {
	#address-cells = <1>;
	#size-cells = <1>;
	compatible = "simple-bus";
	ranges = <0x20000000 0x20000000 0x30000000>;

	/* System Control Block */
	scb {
	compatible = "simple-bus";
	ranges = <0x0 0x040004000 0x00001000>;
	#address-cells = <1>;
	#size-cells = <1>;

	clk: clock-controller@0 {
	compatible = "nxp,lpc3220-clk";
	reg = <0x00 0x114>;
	#clock-cells = <1>;

	clocks = <&xtal_32k>, <&xtal>;
	clock-names = "xtal_32k", "xtal";
	};
	};

	mic: interrupt-controller@40008000 {
	compatible = "nxp,lpc3220-mic";
	reg = <0x40008000 0x4000>;
	interrupt-controller;
	#interrupt-cells = <2>;
	};

	sic1: interrupt-controller@4000c000 {
	compatible = "nxp,lpc3220-sic";
	reg = <0x4000c000 0x4000>;
	interrupt-controller;
	#interrupt-cells = <2>;

	interrupt-parent = <&mic>;
	interrupts = <0 IRQ_TYPE_LEVEL_LOW>,
	<30 IRQ_TYPE_LEVEL_LOW>;
	};

	sic2: interrupt-controller@40010000 {
	compatible = "nxp,lpc3220-sic";
	reg = <0x40010000 0x4000>;
	interrupt-controller;
	#interrupt-cells = <2>;

	interrupt-parent = <&mic>;
	interrupts = <1 IRQ_TYPE_LEVEL_LOW>,
	<31 IRQ_TYPE_LEVEL_LOW>;
	};

	uart1: serial@40014000 {
	compatible = "nxp,lpc3220-hsuart";
	reg = <0x40014000 0x1000>;
	interrupts = <26 IRQ_TYPE_LEVEL_HIGH>;
	status = "disabled";
	};

	uart2: serial@40018000 {
	compatible = "nxp,lpc3220-hsuart";
	reg = <0x40018000 0x1000>;
	interrupts = <25 IRQ_TYPE_LEVEL_HIGH>;
	status = "disabled";
	};

	uart7: serial@4001c000 {
	compatible = "nxp,lpc3220-hsuart";
	reg = <0x4001c000 0x1000>;
	interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
	status = "disabled";
	};

	rtc: rtc@40024000 {
	compatible = "nxp,lpc3220-rtc";
	reg = <0x40024000 0x1000>;
	interrupt-parent = <&sic1>;
	interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
	clocks = <&clk LPC32XX_CLK_RTC>;
	};

	gpio: gpio@40028000 {
	compatible = "nxp,lpc3220-gpio";
	reg = <0x40028000 0x1000>;
	gpio-controller;
	#gpio-cells = <3>; /* bank, pin, flags */
	};

	timer4: timer@4002c000 {
	compatible = "nxp,lpc3220-timer";
	reg = <0x4002C000 0x1000>;
	interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
	clocks = <&clk LPC32XX_CLK_TIMER4>;
	clock-names = "timerclk";
	status = "disabled";
	};

	timer5: timer@40030000 {
	compatible = "nxp,lpc3220-timer";
	reg = <0x40030000 0x1000>;
	interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
	clocks = <&clk LPC32XX_CLK_TIMER5>;
	clock-names = "timerclk";
	status = "disabled";
	};

	watchdog: watchdog@4003c000 {
	compatible = "nxp,pnx4008-wdt";
	reg = <0x4003C000 0x1000>;
	clocks = <&clk LPC32XX_CLK_WDOG>;
	};

	timer0: timer@40044000 {
	compatible = "nxp,lpc3220-timer";
	reg = <0x40044000 0x1000>;
	clocks = <&clk LPC32XX_CLK_TIMER0>;
	clock-names = "timerclk";
	interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
	};

	/*
	* TSC vs. ADC: Since those two share the same
	* hardware, you need to choose from one of the
	* following two and do 'status = "okay";' for one of
	* them
	*/

	adc: adc@40048000 {
	compatible = "nxp,lpc3220-adc";
	reg = <0x40048000 0x1000>;
	interrupt-parent = <&sic1>;
	interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
	clocks = <&clk LPC32XX_CLK_ADC>;
	status = "disabled";
	};

	tsc: tsc@40048000 {
	compatible = "nxp,lpc3220-tsc";
	reg = <0x40048000 0x1000>;
	interrupt-parent = <&sic1>;
	interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
	clocks = <&clk LPC32XX_CLK_ADC>;
	status = "disabled";
	};

	timer1: timer@4004c000 {
	compatible = "nxp,lpc3220-timer";
	reg = <0x4004C000 0x1000>;
	interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
	clocks = <&clk LPC32XX_CLK_TIMER1>;
	clock-names = "timerclk";
	};

	key: key@40050000 {
	compatible = "nxp,lpc3220-key";
	reg = <0x40050000 0x1000>;
	clocks = <&clk LPC32XX_CLK_KEY>;
	interrupt-parent = <&sic1>;
	interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
	status = "disabled";
	};

	timer2: timer@40058000 {
	compatible = "nxp,lpc3220-timer";
	reg = <0x40058000 0x1000>;
	interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
	clocks = <&clk LPC32XX_CLK_TIMER2>;
	clock-names = "timerclk";
	status = "disabled";
	};

	pwm1: pwm@4005c000 {
	compatible = "nxp,lpc3220-pwm";
	reg = <0x4005C000 0x4>;
	clocks = <&clk LPC32XX_CLK_PWM1>;
	assigned-clocks = <&clk LPC32XX_CLK_PWM1>;
	assigned-clock-parents = <&clk LPC32XX_CLK_PERIPH>;
	status = "disabled";
	};

	pwm2: pwm@4005c004 {
	compatible = "nxp,lpc3220-pwm";
	reg = <0x4005C004 0x4>;
	clocks = <&clk LPC32XX_CLK_PWM2>;
	assigned-clocks = <&clk LPC32XX_CLK_PWM2>;
	assigned-clock-parents = <&clk LPC32XX_CLK_PERIPH>;
	status = "disabled";
	};

	timer3: timer@40060000 {
	compatible = "nxp,lpc3220-timer";
	reg = <0x40060000 0x1000>;
	interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
	clocks = <&clk LPC32XX_CLK_TIMER3>;
	clock-names = "timerclk";
	status = "disabled";
	};
	};
	};
	};