| /* |
| * Copyright (C) 2009 - QLogic Corporation. |
| * All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version 2 |
| * of the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place - Suite 330, Boston, |
| * MA 02111-1307, USA. |
| * |
| * The full GNU General Public License is included in this distribution |
| * in the file called "COPYING". |
| * |
| */ |
| |
| #include <linux/types.h> |
| #include <linux/delay.h> |
| #include <linux/pci.h> |
| #include <linux/io.h> |
| #include <linux/netdevice.h> |
| #include <linux/ethtool.h> |
| |
| #include "qlcnic.h" |
| |
| struct qlcnic_stats { |
| char stat_string[ETH_GSTRING_LEN]; |
| int sizeof_stat; |
| int stat_offset; |
| }; |
| |
| #define QLC_SIZEOF(m) FIELD_SIZEOF(struct qlcnic_adapter, m) |
| #define QLC_OFF(m) offsetof(struct qlcnic_adapter, m) |
| |
| static const struct qlcnic_stats qlcnic_gstrings_stats[] = { |
| {"xmit_called", |
| QLC_SIZEOF(stats.xmitcalled), QLC_OFF(stats.xmitcalled)}, |
| {"xmit_finished", |
| QLC_SIZEOF(stats.xmitfinished), QLC_OFF(stats.xmitfinished)}, |
| {"rx_dropped", |
| QLC_SIZEOF(stats.rxdropped), QLC_OFF(stats.rxdropped)}, |
| {"tx_dropped", |
| QLC_SIZEOF(stats.txdropped), QLC_OFF(stats.txdropped)}, |
| {"csummed", |
| QLC_SIZEOF(stats.csummed), QLC_OFF(stats.csummed)}, |
| {"rx_pkts", |
| QLC_SIZEOF(stats.rx_pkts), QLC_OFF(stats.rx_pkts)}, |
| {"lro_pkts", |
| QLC_SIZEOF(stats.lro_pkts), QLC_OFF(stats.lro_pkts)}, |
| {"rx_bytes", |
| QLC_SIZEOF(stats.rxbytes), QLC_OFF(stats.rxbytes)}, |
| {"tx_bytes", |
| QLC_SIZEOF(stats.txbytes), QLC_OFF(stats.txbytes)}, |
| }; |
| |
| #define QLCNIC_STATS_LEN ARRAY_SIZE(qlcnic_gstrings_stats) |
| |
| static const char qlcnic_gstrings_test[][ETH_GSTRING_LEN] = { |
| "Register_Test_on_offline", |
| "Link_Test_on_offline", |
| "Interrupt_Test_offline", |
| "Loopback_Test_offline" |
| }; |
| |
| #define QLCNIC_TEST_LEN ARRAY_SIZE(qlcnic_gstrings_test) |
| |
| #define QLCNIC_RING_REGS_COUNT 20 |
| #define QLCNIC_RING_REGS_LEN (QLCNIC_RING_REGS_COUNT * sizeof(u32)) |
| #define QLCNIC_MAX_EEPROM_LEN 1024 |
| |
| static const u32 diag_registers[] = { |
| CRB_CMDPEG_STATE, |
| CRB_RCVPEG_STATE, |
| CRB_XG_STATE_P3, |
| CRB_FW_CAPABILITIES_1, |
| ISR_INT_STATE_REG, |
| QLCNIC_CRB_DEV_REF_COUNT, |
| QLCNIC_CRB_DEV_STATE, |
| QLCNIC_CRB_DRV_STATE, |
| QLCNIC_CRB_DRV_SCRATCH, |
| QLCNIC_CRB_DEV_PARTITION_INFO, |
| QLCNIC_CRB_DRV_IDC_VER, |
| QLCNIC_PEG_ALIVE_COUNTER, |
| QLCNIC_PEG_HALT_STATUS1, |
| QLCNIC_PEG_HALT_STATUS2, |
| QLCNIC_CRB_PEG_NET_0+0x3c, |
| QLCNIC_CRB_PEG_NET_1+0x3c, |
| QLCNIC_CRB_PEG_NET_2+0x3c, |
| QLCNIC_CRB_PEG_NET_4+0x3c, |
| -1 |
| }; |
| |
| static int qlcnic_get_regs_len(struct net_device *dev) |
| { |
| return sizeof(diag_registers) + QLCNIC_RING_REGS_LEN; |
| } |
| |
| static int qlcnic_get_eeprom_len(struct net_device *dev) |
| { |
| return QLCNIC_FLASH_TOTAL_SIZE; |
| } |
| |
| static void |
| qlcnic_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *drvinfo) |
| { |
| struct qlcnic_adapter *adapter = netdev_priv(dev); |
| u32 fw_major, fw_minor, fw_build; |
| |
| fw_major = QLCRD32(adapter, QLCNIC_FW_VERSION_MAJOR); |
| fw_minor = QLCRD32(adapter, QLCNIC_FW_VERSION_MINOR); |
| fw_build = QLCRD32(adapter, QLCNIC_FW_VERSION_SUB); |
| sprintf(drvinfo->fw_version, "%d.%d.%d", fw_major, fw_minor, fw_build); |
| |
| strlcpy(drvinfo->bus_info, pci_name(adapter->pdev), 32); |
| strlcpy(drvinfo->driver, qlcnic_driver_name, 32); |
| strlcpy(drvinfo->version, QLCNIC_LINUX_VERSIONID, 32); |
| } |
| |
| static int |
| qlcnic_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd) |
| { |
| struct qlcnic_adapter *adapter = netdev_priv(dev); |
| int check_sfp_module = 0; |
| u16 pcifn = adapter->ahw.pci_func; |
| |
| /* read which mode */ |
| if (adapter->ahw.port_type == QLCNIC_GBE) { |
| ecmd->supported = (SUPPORTED_10baseT_Half | |
| SUPPORTED_10baseT_Full | |
| SUPPORTED_100baseT_Half | |
| SUPPORTED_100baseT_Full | |
| SUPPORTED_1000baseT_Half | |
| SUPPORTED_1000baseT_Full); |
| |
| ecmd->advertising = (ADVERTISED_100baseT_Half | |
| ADVERTISED_100baseT_Full | |
| ADVERTISED_1000baseT_Half | |
| ADVERTISED_1000baseT_Full); |
| |
| ecmd->speed = adapter->link_speed; |
| ecmd->duplex = adapter->link_duplex; |
| ecmd->autoneg = adapter->link_autoneg; |
| |
| } else if (adapter->ahw.port_type == QLCNIC_XGBE) { |
| u32 val; |
| |
| val = QLCRD32(adapter, QLCNIC_PORT_MODE_ADDR); |
| if (val == QLCNIC_PORT_MODE_802_3_AP) { |
| ecmd->supported = SUPPORTED_1000baseT_Full; |
| ecmd->advertising = ADVERTISED_1000baseT_Full; |
| } else { |
| ecmd->supported = SUPPORTED_10000baseT_Full; |
| ecmd->advertising = ADVERTISED_10000baseT_Full; |
| } |
| |
| if (netif_running(dev) && adapter->has_link_events) { |
| ecmd->speed = adapter->link_speed; |
| ecmd->autoneg = adapter->link_autoneg; |
| ecmd->duplex = adapter->link_duplex; |
| goto skip; |
| } |
| |
| val = QLCRD32(adapter, P3_LINK_SPEED_REG(pcifn)); |
| ecmd->speed = P3_LINK_SPEED_MHZ * |
| P3_LINK_SPEED_VAL(pcifn, val); |
| ecmd->duplex = DUPLEX_FULL; |
| ecmd->autoneg = AUTONEG_DISABLE; |
| } else |
| return -EIO; |
| |
| skip: |
| ecmd->phy_address = adapter->physical_port; |
| ecmd->transceiver = XCVR_EXTERNAL; |
| |
| switch (adapter->ahw.board_type) { |
| case QLCNIC_BRDTYPE_P3_REF_QG: |
| case QLCNIC_BRDTYPE_P3_4_GB: |
| case QLCNIC_BRDTYPE_P3_4_GB_MM: |
| |
| ecmd->supported |= SUPPORTED_Autoneg; |
| ecmd->advertising |= ADVERTISED_Autoneg; |
| case QLCNIC_BRDTYPE_P3_10G_CX4: |
| case QLCNIC_BRDTYPE_P3_10G_CX4_LP: |
| case QLCNIC_BRDTYPE_P3_10000_BASE_T: |
| ecmd->supported |= SUPPORTED_TP; |
| ecmd->advertising |= ADVERTISED_TP; |
| ecmd->port = PORT_TP; |
| ecmd->autoneg = adapter->link_autoneg; |
| break; |
| case QLCNIC_BRDTYPE_P3_IMEZ: |
| case QLCNIC_BRDTYPE_P3_XG_LOM: |
| case QLCNIC_BRDTYPE_P3_HMEZ: |
| ecmd->supported |= SUPPORTED_MII; |
| ecmd->advertising |= ADVERTISED_MII; |
| ecmd->port = PORT_MII; |
| ecmd->autoneg = AUTONEG_DISABLE; |
| break; |
| case QLCNIC_BRDTYPE_P3_10G_SFP_PLUS: |
| case QLCNIC_BRDTYPE_P3_10G_SFP_CT: |
| case QLCNIC_BRDTYPE_P3_10G_SFP_QT: |
| ecmd->advertising |= ADVERTISED_TP; |
| ecmd->supported |= SUPPORTED_TP; |
| check_sfp_module = netif_running(dev) && |
| adapter->has_link_events; |
| case QLCNIC_BRDTYPE_P3_10G_XFP: |
| ecmd->supported |= SUPPORTED_FIBRE; |
| ecmd->advertising |= ADVERTISED_FIBRE; |
| ecmd->port = PORT_FIBRE; |
| ecmd->autoneg = AUTONEG_DISABLE; |
| break; |
| case QLCNIC_BRDTYPE_P3_10G_TP: |
| if (adapter->ahw.port_type == QLCNIC_XGBE) { |
| ecmd->autoneg = AUTONEG_DISABLE; |
| ecmd->supported |= (SUPPORTED_FIBRE | SUPPORTED_TP); |
| ecmd->advertising |= |
| (ADVERTISED_FIBRE | ADVERTISED_TP); |
| ecmd->port = PORT_FIBRE; |
| check_sfp_module = netif_running(dev) && |
| adapter->has_link_events; |
| } else { |
| ecmd->autoneg = AUTONEG_ENABLE; |
| ecmd->supported |= (SUPPORTED_TP | SUPPORTED_Autoneg); |
| ecmd->advertising |= |
| (ADVERTISED_TP | ADVERTISED_Autoneg); |
| ecmd->port = PORT_TP; |
| } |
| break; |
| default: |
| dev_err(&adapter->pdev->dev, "Unsupported board model %d\n", |
| adapter->ahw.board_type); |
| return -EIO; |
| } |
| |
| if (check_sfp_module) { |
| switch (adapter->module_type) { |
| case LINKEVENT_MODULE_OPTICAL_UNKNOWN: |
| case LINKEVENT_MODULE_OPTICAL_SRLR: |
| case LINKEVENT_MODULE_OPTICAL_LRM: |
| case LINKEVENT_MODULE_OPTICAL_SFP_1G: |
| ecmd->port = PORT_FIBRE; |
| break; |
| case LINKEVENT_MODULE_TWINAX_UNSUPPORTED_CABLE: |
| case LINKEVENT_MODULE_TWINAX_UNSUPPORTED_CABLELEN: |
| case LINKEVENT_MODULE_TWINAX: |
| ecmd->port = PORT_TP; |
| break; |
| default: |
| ecmd->port = PORT_OTHER; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int |
| qlcnic_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd) |
| { |
| struct qlcnic_adapter *adapter = netdev_priv(dev); |
| __u32 status; |
| |
| /* read which mode */ |
| if (adapter->ahw.port_type == QLCNIC_GBE) { |
| /* autonegotiation */ |
| if (qlcnic_fw_cmd_set_phy(adapter, |
| QLCNIC_NIU_GB_MII_MGMT_ADDR_AUTONEG, |
| ecmd->autoneg) != 0) |
| return -EIO; |
| else |
| adapter->link_autoneg = ecmd->autoneg; |
| |
| if (qlcnic_fw_cmd_query_phy(adapter, |
| QLCNIC_NIU_GB_MII_MGMT_ADDR_PHY_STATUS, |
| &status) != 0) |
| return -EIO; |
| |
| switch (ecmd->speed) { |
| case SPEED_10: |
| qlcnic_set_phy_speed(status, 0); |
| break; |
| case SPEED_100: |
| qlcnic_set_phy_speed(status, 1); |
| break; |
| case SPEED_1000: |
| qlcnic_set_phy_speed(status, 2); |
| break; |
| } |
| |
| if (ecmd->duplex == DUPLEX_HALF) |
| qlcnic_clear_phy_duplex(status); |
| if (ecmd->duplex == DUPLEX_FULL) |
| qlcnic_set_phy_duplex(status); |
| if (qlcnic_fw_cmd_set_phy(adapter, |
| QLCNIC_NIU_GB_MII_MGMT_ADDR_PHY_STATUS, |
| *((int *)&status)) != 0) |
| return -EIO; |
| else { |
| adapter->link_speed = ecmd->speed; |
| adapter->link_duplex = ecmd->duplex; |
| } |
| } else |
| return -EOPNOTSUPP; |
| |
| if (!netif_running(dev)) |
| return 0; |
| |
| dev->netdev_ops->ndo_stop(dev); |
| return dev->netdev_ops->ndo_open(dev); |
| } |
| |
| static void |
| qlcnic_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *p) |
| { |
| struct qlcnic_adapter *adapter = netdev_priv(dev); |
| struct qlcnic_recv_context *recv_ctx = &adapter->recv_ctx; |
| struct qlcnic_host_sds_ring *sds_ring; |
| u32 *regs_buff = p; |
| int ring, i = 0; |
| |
| memset(p, 0, qlcnic_get_regs_len(dev)); |
| regs->version = (1 << 24) | (adapter->ahw.revision_id << 16) | |
| (adapter->pdev)->device; |
| |
| for (i = 0; diag_registers[i] != -1; i++) |
| regs_buff[i] = QLCRD32(adapter, diag_registers[i]); |
| |
| if (adapter->is_up != QLCNIC_ADAPTER_UP_MAGIC) |
| return; |
| |
| regs_buff[i++] = 0xFFEFCDAB; /* Marker btw regs and ring count*/ |
| |
| regs_buff[i++] = 1; /* No. of tx ring */ |
| regs_buff[i++] = le32_to_cpu(*(adapter->tx_ring->hw_consumer)); |
| regs_buff[i++] = readl(adapter->tx_ring->crb_cmd_producer); |
| |
| regs_buff[i++] = 2; /* No. of rx ring */ |
| regs_buff[i++] = readl(recv_ctx->rds_rings[0].crb_rcv_producer); |
| regs_buff[i++] = readl(recv_ctx->rds_rings[1].crb_rcv_producer); |
| |
| regs_buff[i++] = adapter->max_sds_rings; |
| |
| for (ring = 0; ring < adapter->max_sds_rings; ring++) { |
| sds_ring = &(recv_ctx->sds_rings[ring]); |
| regs_buff[i++] = readl(sds_ring->crb_sts_consumer); |
| } |
| } |
| |
| static u32 qlcnic_test_link(struct net_device *dev) |
| { |
| struct qlcnic_adapter *adapter = netdev_priv(dev); |
| u32 val; |
| |
| val = QLCRD32(adapter, CRB_XG_STATE_P3); |
| val = XG_LINK_STATE_P3(adapter->ahw.pci_func, val); |
| return (val == XG_LINK_UP_P3) ? 0 : 1; |
| } |
| |
| static int |
| qlcnic_get_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom, |
| u8 *bytes) |
| { |
| struct qlcnic_adapter *adapter = netdev_priv(dev); |
| int offset; |
| int ret; |
| |
| if (eeprom->len == 0) |
| return -EINVAL; |
| |
| eeprom->magic = (adapter->pdev)->vendor | |
| ((adapter->pdev)->device << 16); |
| offset = eeprom->offset; |
| |
| ret = qlcnic_rom_fast_read_words(adapter, offset, bytes, |
| eeprom->len); |
| if (ret < 0) |
| return ret; |
| |
| return 0; |
| } |
| |
| static void |
| qlcnic_get_ringparam(struct net_device *dev, |
| struct ethtool_ringparam *ring) |
| { |
| struct qlcnic_adapter *adapter = netdev_priv(dev); |
| |
| ring->rx_pending = adapter->num_rxd; |
| ring->rx_jumbo_pending = adapter->num_jumbo_rxd; |
| ring->rx_jumbo_pending += adapter->num_lro_rxd; |
| ring->tx_pending = adapter->num_txd; |
| |
| if (adapter->ahw.port_type == QLCNIC_GBE) { |
| ring->rx_max_pending = MAX_RCV_DESCRIPTORS_1G; |
| ring->rx_jumbo_max_pending = MAX_JUMBO_RCV_DESCRIPTORS_1G; |
| } else { |
| ring->rx_max_pending = MAX_RCV_DESCRIPTORS_10G; |
| ring->rx_jumbo_max_pending = MAX_JUMBO_RCV_DESCRIPTORS_10G; |
| } |
| |
| ring->tx_max_pending = MAX_CMD_DESCRIPTORS; |
| |
| ring->rx_mini_max_pending = 0; |
| ring->rx_mini_pending = 0; |
| } |
| |
| static u32 |
| qlcnic_validate_ringparam(u32 val, u32 min, u32 max, char *r_name) |
| { |
| u32 num_desc; |
| num_desc = max(val, min); |
| num_desc = min(num_desc, max); |
| num_desc = roundup_pow_of_two(num_desc); |
| |
| if (val != num_desc) { |
| printk(KERN_INFO "%s: setting %s ring size %d instead of %d\n", |
| qlcnic_driver_name, r_name, num_desc, val); |
| } |
| |
| return num_desc; |
| } |
| |
| static int |
| qlcnic_set_ringparam(struct net_device *dev, |
| struct ethtool_ringparam *ring) |
| { |
| struct qlcnic_adapter *adapter = netdev_priv(dev); |
| u16 max_rcv_desc = MAX_RCV_DESCRIPTORS_10G; |
| u16 max_jumbo_desc = MAX_JUMBO_RCV_DESCRIPTORS_10G; |
| u16 num_rxd, num_jumbo_rxd, num_txd; |
| |
| |
| if (ring->rx_mini_pending) |
| return -EOPNOTSUPP; |
| |
| if (adapter->ahw.port_type == QLCNIC_GBE) { |
| max_rcv_desc = MAX_RCV_DESCRIPTORS_1G; |
| max_jumbo_desc = MAX_JUMBO_RCV_DESCRIPTORS_10G; |
| } |
| |
| num_rxd = qlcnic_validate_ringparam(ring->rx_pending, |
| MIN_RCV_DESCRIPTORS, max_rcv_desc, "rx"); |
| |
| num_jumbo_rxd = qlcnic_validate_ringparam(ring->rx_jumbo_pending, |
| MIN_JUMBO_DESCRIPTORS, max_jumbo_desc, "rx jumbo"); |
| |
| num_txd = qlcnic_validate_ringparam(ring->tx_pending, |
| MIN_CMD_DESCRIPTORS, MAX_CMD_DESCRIPTORS, "tx"); |
| |
| if (num_rxd == adapter->num_rxd && num_txd == adapter->num_txd && |
| num_jumbo_rxd == adapter->num_jumbo_rxd) |
| return 0; |
| |
| adapter->num_rxd = num_rxd; |
| adapter->num_jumbo_rxd = num_jumbo_rxd; |
| adapter->num_txd = num_txd; |
| |
| return qlcnic_reset_context(adapter); |
| } |
| |
| static void |
| qlcnic_get_pauseparam(struct net_device *netdev, |
| struct ethtool_pauseparam *pause) |
| { |
| struct qlcnic_adapter *adapter = netdev_priv(netdev); |
| int port = adapter->physical_port; |
| __u32 val; |
| |
| if (adapter->ahw.port_type == QLCNIC_GBE) { |
| if ((port < 0) || (port > QLCNIC_NIU_MAX_GBE_PORTS)) |
| return; |
| /* get flow control settings */ |
| val = QLCRD32(adapter, QLCNIC_NIU_GB_MAC_CONFIG_0(port)); |
| pause->rx_pause = qlcnic_gb_get_rx_flowctl(val); |
| val = QLCRD32(adapter, QLCNIC_NIU_GB_PAUSE_CTL); |
| switch (port) { |
| case 0: |
| pause->tx_pause = !(qlcnic_gb_get_gb0_mask(val)); |
| break; |
| case 1: |
| pause->tx_pause = !(qlcnic_gb_get_gb1_mask(val)); |
| break; |
| case 2: |
| pause->tx_pause = !(qlcnic_gb_get_gb2_mask(val)); |
| break; |
| case 3: |
| default: |
| pause->tx_pause = !(qlcnic_gb_get_gb3_mask(val)); |
| break; |
| } |
| } else if (adapter->ahw.port_type == QLCNIC_XGBE) { |
| if ((port < 0) || (port > QLCNIC_NIU_MAX_XG_PORTS)) |
| return; |
| pause->rx_pause = 1; |
| val = QLCRD32(adapter, QLCNIC_NIU_XG_PAUSE_CTL); |
| if (port == 0) |
| pause->tx_pause = !(qlcnic_xg_get_xg0_mask(val)); |
| else |
| pause->tx_pause = !(qlcnic_xg_get_xg1_mask(val)); |
| } else { |
| dev_err(&netdev->dev, "Unknown board type: %x\n", |
| adapter->ahw.port_type); |
| } |
| } |
| |
| static int |
| qlcnic_set_pauseparam(struct net_device *netdev, |
| struct ethtool_pauseparam *pause) |
| { |
| struct qlcnic_adapter *adapter = netdev_priv(netdev); |
| int port = adapter->physical_port; |
| __u32 val; |
| |
| /* read mode */ |
| if (adapter->ahw.port_type == QLCNIC_GBE) { |
| if ((port < 0) || (port > QLCNIC_NIU_MAX_GBE_PORTS)) |
| return -EIO; |
| /* set flow control */ |
| val = QLCRD32(adapter, QLCNIC_NIU_GB_MAC_CONFIG_0(port)); |
| |
| if (pause->rx_pause) |
| qlcnic_gb_rx_flowctl(val); |
| else |
| qlcnic_gb_unset_rx_flowctl(val); |
| |
| QLCWR32(adapter, QLCNIC_NIU_GB_MAC_CONFIG_0(port), |
| val); |
| /* set autoneg */ |
| val = QLCRD32(adapter, QLCNIC_NIU_GB_PAUSE_CTL); |
| switch (port) { |
| case 0: |
| if (pause->tx_pause) |
| qlcnic_gb_unset_gb0_mask(val); |
| else |
| qlcnic_gb_set_gb0_mask(val); |
| break; |
| case 1: |
| if (pause->tx_pause) |
| qlcnic_gb_unset_gb1_mask(val); |
| else |
| qlcnic_gb_set_gb1_mask(val); |
| break; |
| case 2: |
| if (pause->tx_pause) |
| qlcnic_gb_unset_gb2_mask(val); |
| else |
| qlcnic_gb_set_gb2_mask(val); |
| break; |
| case 3: |
| default: |
| if (pause->tx_pause) |
| qlcnic_gb_unset_gb3_mask(val); |
| else |
| qlcnic_gb_set_gb3_mask(val); |
| break; |
| } |
| QLCWR32(adapter, QLCNIC_NIU_GB_PAUSE_CTL, val); |
| } else if (adapter->ahw.port_type == QLCNIC_XGBE) { |
| if ((port < 0) || (port > QLCNIC_NIU_MAX_XG_PORTS)) |
| return -EIO; |
| val = QLCRD32(adapter, QLCNIC_NIU_XG_PAUSE_CTL); |
| if (port == 0) { |
| if (pause->tx_pause) |
| qlcnic_xg_unset_xg0_mask(val); |
| else |
| qlcnic_xg_set_xg0_mask(val); |
| } else { |
| if (pause->tx_pause) |
| qlcnic_xg_unset_xg1_mask(val); |
| else |
| qlcnic_xg_set_xg1_mask(val); |
| } |
| QLCWR32(adapter, QLCNIC_NIU_XG_PAUSE_CTL, val); |
| } else { |
| dev_err(&netdev->dev, "Unknown board type: %x\n", |
| adapter->ahw.port_type); |
| } |
| return 0; |
| } |
| |
| static int qlcnic_reg_test(struct net_device *dev) |
| { |
| struct qlcnic_adapter *adapter = netdev_priv(dev); |
| u32 data_read, data_written; |
| |
| data_read = QLCRD32(adapter, QLCNIC_PCIX_PH_REG(0)); |
| if ((data_read & 0xffff) != adapter->pdev->vendor) |
| return 1; |
| |
| data_written = (u32)0xa5a5a5a5; |
| |
| QLCWR32(adapter, CRB_SCRATCHPAD_TEST, data_written); |
| data_read = QLCRD32(adapter, CRB_SCRATCHPAD_TEST); |
| if (data_written != data_read) |
| return 1; |
| |
| return 0; |
| } |
| |
| static int qlcnic_get_sset_count(struct net_device *dev, int sset) |
| { |
| switch (sset) { |
| case ETH_SS_TEST: |
| return QLCNIC_TEST_LEN; |
| case ETH_SS_STATS: |
| return QLCNIC_STATS_LEN; |
| default: |
| return -EOPNOTSUPP; |
| } |
| } |
| |
| #define QLC_ILB_PKT_SIZE 64 |
| |
| static void qlcnic_create_loopback_buff(unsigned char *data) |
| { |
| unsigned char random_data[] = {0xa8, 0x06, 0x45, 0x00}; |
| memset(data, 0x4e, QLC_ILB_PKT_SIZE); |
| memset(data, 0xff, 12); |
| memcpy(data + 12, random_data, sizeof(random_data)); |
| } |
| |
| int qlcnic_check_loopback_buff(unsigned char *data) |
| { |
| unsigned char buff[QLC_ILB_PKT_SIZE]; |
| qlcnic_create_loopback_buff(buff); |
| return memcmp(data, buff, QLC_ILB_PKT_SIZE); |
| } |
| |
| static int qlcnic_do_ilb_test(struct qlcnic_adapter *adapter) |
| { |
| struct qlcnic_recv_context *recv_ctx = &adapter->recv_ctx; |
| struct qlcnic_host_sds_ring *sds_ring = &recv_ctx->sds_rings[0]; |
| struct sk_buff *skb; |
| int i; |
| |
| for (i = 0; i < 16; i++) { |
| skb = dev_alloc_skb(QLC_ILB_PKT_SIZE); |
| qlcnic_create_loopback_buff(skb->data); |
| skb_put(skb, QLC_ILB_PKT_SIZE); |
| |
| adapter->diag_cnt = 0; |
| |
| qlcnic_xmit_frame(skb, adapter->netdev); |
| |
| msleep(5); |
| |
| qlcnic_process_rcv_ring_diag(sds_ring); |
| |
| dev_kfree_skb_any(skb); |
| if (!adapter->diag_cnt) |
| return -1; |
| } |
| return 0; |
| } |
| |
| static int qlcnic_loopback_test(struct net_device *netdev) |
| { |
| struct qlcnic_adapter *adapter = netdev_priv(netdev); |
| int max_sds_rings = adapter->max_sds_rings; |
| int ret; |
| |
| if (test_and_set_bit(__QLCNIC_RESETTING, &adapter->state)) |
| return -EIO; |
| |
| ret = qlcnic_diag_alloc_res(netdev, QLCNIC_LOOPBACK_TEST); |
| if (ret) |
| goto clear_it; |
| |
| ret = qlcnic_set_ilb_mode(adapter); |
| if (ret) |
| goto done; |
| |
| ret = qlcnic_do_ilb_test(adapter); |
| |
| qlcnic_clear_ilb_mode(adapter); |
| |
| done: |
| qlcnic_diag_free_res(netdev, max_sds_rings); |
| |
| clear_it: |
| adapter->max_sds_rings = max_sds_rings; |
| clear_bit(__QLCNIC_RESETTING, &adapter->state); |
| return ret; |
| } |
| |
| static int qlcnic_irq_test(struct net_device *netdev) |
| { |
| struct qlcnic_adapter *adapter = netdev_priv(netdev); |
| int max_sds_rings = adapter->max_sds_rings; |
| int ret; |
| |
| if (test_and_set_bit(__QLCNIC_RESETTING, &adapter->state)) |
| return -EIO; |
| |
| ret = qlcnic_diag_alloc_res(netdev, QLCNIC_INTERRUPT_TEST); |
| if (ret) |
| goto clear_it; |
| |
| adapter->diag_cnt = 0; |
| ret = qlcnic_issue_cmd(adapter, adapter->ahw.pci_func, |
| QLCHAL_VERSION, adapter->portnum, 0, 0, 0x00000011); |
| if (ret) |
| goto done; |
| |
| msleep(10); |
| |
| ret = !adapter->diag_cnt; |
| |
| done: |
| qlcnic_diag_free_res(netdev, max_sds_rings); |
| |
| clear_it: |
| adapter->max_sds_rings = max_sds_rings; |
| clear_bit(__QLCNIC_RESETTING, &adapter->state); |
| return ret; |
| } |
| |
| static void |
| qlcnic_diag_test(struct net_device *dev, struct ethtool_test *eth_test, |
| u64 *data) |
| { |
| memset(data, 0, sizeof(u64) * QLCNIC_TEST_LEN); |
| |
| if (eth_test->flags == ETH_TEST_FL_OFFLINE) { |
| data[2] = qlcnic_irq_test(dev); |
| if (data[2]) |
| eth_test->flags |= ETH_TEST_FL_FAILED; |
| |
| data[3] = qlcnic_loopback_test(dev); |
| if (data[3]) |
| eth_test->flags |= ETH_TEST_FL_FAILED; |
| |
| } |
| |
| data[0] = qlcnic_reg_test(dev); |
| if (data[0]) |
| eth_test->flags |= ETH_TEST_FL_FAILED; |
| |
| /* link test */ |
| data[1] = (u64) qlcnic_test_link(dev); |
| if (data[1]) |
| eth_test->flags |= ETH_TEST_FL_FAILED; |
| } |
| |
| static void |
| qlcnic_get_strings(struct net_device *dev, u32 stringset, u8 * data) |
| { |
| int index; |
| |
| switch (stringset) { |
| case ETH_SS_TEST: |
| memcpy(data, *qlcnic_gstrings_test, |
| QLCNIC_TEST_LEN * ETH_GSTRING_LEN); |
| break; |
| case ETH_SS_STATS: |
| for (index = 0; index < QLCNIC_STATS_LEN; index++) { |
| memcpy(data + index * ETH_GSTRING_LEN, |
| qlcnic_gstrings_stats[index].stat_string, |
| ETH_GSTRING_LEN); |
| } |
| break; |
| } |
| } |
| |
| static void |
| qlcnic_get_ethtool_stats(struct net_device *dev, |
| struct ethtool_stats *stats, u64 * data) |
| { |
| struct qlcnic_adapter *adapter = netdev_priv(dev); |
| int index; |
| |
| for (index = 0; index < QLCNIC_STATS_LEN; index++) { |
| char *p = |
| (char *)adapter + |
| qlcnic_gstrings_stats[index].stat_offset; |
| data[index] = |
| (qlcnic_gstrings_stats[index].sizeof_stat == |
| sizeof(u64)) ? *(u64 *)p:(*(u32 *)p); |
| } |
| } |
| |
| static u32 qlcnic_get_rx_csum(struct net_device *dev) |
| { |
| struct qlcnic_adapter *adapter = netdev_priv(dev); |
| return adapter->rx_csum; |
| } |
| |
| static int qlcnic_set_rx_csum(struct net_device *dev, u32 data) |
| { |
| struct qlcnic_adapter *adapter = netdev_priv(dev); |
| adapter->rx_csum = !!data; |
| return 0; |
| } |
| |
| static u32 qlcnic_get_tso(struct net_device *dev) |
| { |
| return (dev->features & (NETIF_F_TSO | NETIF_F_TSO6)) != 0; |
| } |
| |
| static int qlcnic_set_tso(struct net_device *dev, u32 data) |
| { |
| if (data) |
| dev->features |= (NETIF_F_TSO | NETIF_F_TSO6); |
| else |
| dev->features &= ~(NETIF_F_TSO | NETIF_F_TSO6); |
| |
| return 0; |
| } |
| |
| static int qlcnic_blink_led(struct net_device *dev, u32 val) |
| { |
| struct qlcnic_adapter *adapter = netdev_priv(dev); |
| int ret; |
| |
| ret = qlcnic_config_led(adapter, 1, 0xf); |
| if (ret) { |
| dev_err(&adapter->pdev->dev, |
| "Failed to set LED blink state.\n"); |
| return ret; |
| } |
| |
| msleep_interruptible(val * 1000); |
| |
| ret = qlcnic_config_led(adapter, 0, 0xf); |
| if (ret) { |
| dev_err(&adapter->pdev->dev, |
| "Failed to reset LED blink state.\n"); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static void |
| qlcnic_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol) |
| { |
| struct qlcnic_adapter *adapter = netdev_priv(dev); |
| u32 wol_cfg; |
| |
| wol->supported = 0; |
| wol->wolopts = 0; |
| |
| wol_cfg = QLCRD32(adapter, QLCNIC_WOL_CONFIG_NV); |
| if (wol_cfg & (1UL << adapter->portnum)) |
| wol->supported |= WAKE_MAGIC; |
| |
| wol_cfg = QLCRD32(adapter, QLCNIC_WOL_CONFIG); |
| if (wol_cfg & (1UL << adapter->portnum)) |
| wol->wolopts |= WAKE_MAGIC; |
| } |
| |
| static int |
| qlcnic_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol) |
| { |
| struct qlcnic_adapter *adapter = netdev_priv(dev); |
| u32 wol_cfg; |
| |
| if (wol->wolopts & ~WAKE_MAGIC) |
| return -EOPNOTSUPP; |
| |
| wol_cfg = QLCRD32(adapter, QLCNIC_WOL_CONFIG_NV); |
| if (!(wol_cfg & (1 << adapter->portnum))) |
| return -EOPNOTSUPP; |
| |
| wol_cfg = QLCRD32(adapter, QLCNIC_WOL_CONFIG); |
| if (wol->wolopts & WAKE_MAGIC) |
| wol_cfg |= 1UL << adapter->portnum; |
| else |
| wol_cfg &= ~(1UL << adapter->portnum); |
| |
| QLCWR32(adapter, QLCNIC_WOL_CONFIG, wol_cfg); |
| |
| return 0; |
| } |
| |
| /* |
| * Set the coalescing parameters. Currently only normal is supported. |
| * If rx_coalesce_usecs == 0 or rx_max_coalesced_frames == 0 then set the |
| * firmware coalescing to default. |
| */ |
| static int qlcnic_set_intr_coalesce(struct net_device *netdev, |
| struct ethtool_coalesce *ethcoal) |
| { |
| struct qlcnic_adapter *adapter = netdev_priv(netdev); |
| |
| if (adapter->is_up != QLCNIC_ADAPTER_UP_MAGIC) |
| return -EINVAL; |
| |
| /* |
| * Return Error if unsupported values or |
| * unsupported parameters are set. |
| */ |
| if (ethcoal->rx_coalesce_usecs > 0xffff || |
| ethcoal->rx_max_coalesced_frames > 0xffff || |
| ethcoal->tx_coalesce_usecs > 0xffff || |
| ethcoal->tx_max_coalesced_frames > 0xffff || |
| ethcoal->rx_coalesce_usecs_irq || |
| ethcoal->rx_max_coalesced_frames_irq || |
| ethcoal->tx_coalesce_usecs_irq || |
| ethcoal->tx_max_coalesced_frames_irq || |
| ethcoal->stats_block_coalesce_usecs || |
| ethcoal->use_adaptive_rx_coalesce || |
| ethcoal->use_adaptive_tx_coalesce || |
| ethcoal->pkt_rate_low || |
| ethcoal->rx_coalesce_usecs_low || |
| ethcoal->rx_max_coalesced_frames_low || |
| ethcoal->tx_coalesce_usecs_low || |
| ethcoal->tx_max_coalesced_frames_low || |
| ethcoal->pkt_rate_high || |
| ethcoal->rx_coalesce_usecs_high || |
| ethcoal->rx_max_coalesced_frames_high || |
| ethcoal->tx_coalesce_usecs_high || |
| ethcoal->tx_max_coalesced_frames_high) |
| return -EINVAL; |
| |
| if (!ethcoal->rx_coalesce_usecs || |
| !ethcoal->rx_max_coalesced_frames) { |
| adapter->coal.flags = QLCNIC_INTR_DEFAULT; |
| adapter->coal.normal.data.rx_time_us = |
| QLCNIC_DEFAULT_INTR_COALESCE_RX_TIME_US; |
| adapter->coal.normal.data.rx_packets = |
| QLCNIC_DEFAULT_INTR_COALESCE_RX_PACKETS; |
| } else { |
| adapter->coal.flags = 0; |
| adapter->coal.normal.data.rx_time_us = |
| ethcoal->rx_coalesce_usecs; |
| adapter->coal.normal.data.rx_packets = |
| ethcoal->rx_max_coalesced_frames; |
| } |
| adapter->coal.normal.data.tx_time_us = ethcoal->tx_coalesce_usecs; |
| adapter->coal.normal.data.tx_packets = |
| ethcoal->tx_max_coalesced_frames; |
| |
| qlcnic_config_intr_coalesce(adapter); |
| |
| return 0; |
| } |
| |
| static int qlcnic_get_intr_coalesce(struct net_device *netdev, |
| struct ethtool_coalesce *ethcoal) |
| { |
| struct qlcnic_adapter *adapter = netdev_priv(netdev); |
| |
| if (adapter->is_up != QLCNIC_ADAPTER_UP_MAGIC) |
| return -EINVAL; |
| |
| ethcoal->rx_coalesce_usecs = adapter->coal.normal.data.rx_time_us; |
| ethcoal->tx_coalesce_usecs = adapter->coal.normal.data.tx_time_us; |
| ethcoal->rx_max_coalesced_frames = |
| adapter->coal.normal.data.rx_packets; |
| ethcoal->tx_max_coalesced_frames = |
| adapter->coal.normal.data.tx_packets; |
| |
| return 0; |
| } |
| |
| static int qlcnic_set_flags(struct net_device *netdev, u32 data) |
| { |
| struct qlcnic_adapter *adapter = netdev_priv(netdev); |
| int hw_lro; |
| |
| if (!(adapter->capabilities & QLCNIC_FW_CAPABILITY_HW_LRO)) |
| return -EINVAL; |
| |
| ethtool_op_set_flags(netdev, data); |
| |
| hw_lro = (data & ETH_FLAG_LRO) ? QLCNIC_LRO_ENABLED : 0; |
| |
| if (qlcnic_config_hw_lro(adapter, hw_lro)) |
| return -EIO; |
| |
| if ((hw_lro == 0) && qlcnic_send_lro_cleanup(adapter)) |
| return -EIO; |
| |
| |
| return 0; |
| } |
| |
| const struct ethtool_ops qlcnic_ethtool_ops = { |
| .get_settings = qlcnic_get_settings, |
| .set_settings = qlcnic_set_settings, |
| .get_drvinfo = qlcnic_get_drvinfo, |
| .get_regs_len = qlcnic_get_regs_len, |
| .get_regs = qlcnic_get_regs, |
| .get_link = ethtool_op_get_link, |
| .get_eeprom_len = qlcnic_get_eeprom_len, |
| .get_eeprom = qlcnic_get_eeprom, |
| .get_ringparam = qlcnic_get_ringparam, |
| .set_ringparam = qlcnic_set_ringparam, |
| .get_pauseparam = qlcnic_get_pauseparam, |
| .set_pauseparam = qlcnic_set_pauseparam, |
| .set_tx_csum = ethtool_op_set_tx_csum, |
| .set_sg = ethtool_op_set_sg, |
| .get_tso = qlcnic_get_tso, |
| .set_tso = qlcnic_set_tso, |
| .get_wol = qlcnic_get_wol, |
| .set_wol = qlcnic_set_wol, |
| .self_test = qlcnic_diag_test, |
| .get_strings = qlcnic_get_strings, |
| .get_ethtool_stats = qlcnic_get_ethtool_stats, |
| .get_sset_count = qlcnic_get_sset_count, |
| .get_rx_csum = qlcnic_get_rx_csum, |
| .set_rx_csum = qlcnic_set_rx_csum, |
| .get_coalesce = qlcnic_get_intr_coalesce, |
| .set_coalesce = qlcnic_set_intr_coalesce, |
| .get_flags = ethtool_op_get_flags, |
| .set_flags = qlcnic_set_flags, |
| .phys_id = qlcnic_blink_led, |
| }; |