| /* |
| * This file contains the 64-bit "server" PowerPC variant |
| * of the low level exception handling including exception |
| * vectors, exception return, part of the slb and stab |
| * handling and other fixed offset specific things. |
| * |
| * This file is meant to be #included from head_64.S due to |
| * position dependant assembly. |
| * |
| * Most of this originates from head_64.S and thus has the same |
| * copyright history. |
| * |
| */ |
| |
| #include <asm/exception-64s.h> |
| |
| /* |
| * We layout physical memory as follows: |
| * 0x0000 - 0x00ff : Secondary processor spin code |
| * 0x0100 - 0x2fff : pSeries Interrupt prologs |
| * 0x3000 - 0x5fff : interrupt support, iSeries and common interrupt prologs |
| * 0x6000 - 0x6fff : Initial (CPU0) segment table |
| * 0x7000 - 0x7fff : FWNMI data area |
| * 0x8000 - : Early init and support code |
| */ |
| |
| /* |
| * This is the start of the interrupt handlers for pSeries |
| * This code runs with relocation off. |
| * Code from here to __end_interrupts gets copied down to real |
| * address 0x100 when we are running a relocatable kernel. |
| * Therefore any relative branches in this section must only |
| * branch to labels in this section. |
| */ |
| . = 0x100 |
| .globl __start_interrupts |
| __start_interrupts: |
| |
| STD_EXCEPTION_PSERIES(0x100, system_reset) |
| |
| . = 0x200 |
| _machine_check_pSeries: |
| HMT_MEDIUM |
| DO_KVM 0x200 |
| mtspr SPRN_SPRG_SCRATCH0,r13 /* save r13 */ |
| EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common) |
| |
| . = 0x300 |
| .globl data_access_pSeries |
| data_access_pSeries: |
| HMT_MEDIUM |
| DO_KVM 0x300 |
| mtspr SPRN_SPRG_SCRATCH0,r13 |
| BEGIN_FTR_SECTION |
| mfspr r13,SPRN_SPRG_PACA |
| std r9,PACA_EXSLB+EX_R9(r13) |
| std r10,PACA_EXSLB+EX_R10(r13) |
| mfspr r10,SPRN_DAR |
| mfspr r9,SPRN_DSISR |
| srdi r10,r10,60 |
| rlwimi r10,r9,16,0x20 |
| mfcr r9 |
| cmpwi r10,0x2c |
| beq do_stab_bolted_pSeries |
| ld r10,PACA_EXSLB+EX_R10(r13) |
| std r11,PACA_EXGEN+EX_R11(r13) |
| ld r11,PACA_EXSLB+EX_R9(r13) |
| std r12,PACA_EXGEN+EX_R12(r13) |
| mfspr r12,SPRN_SPRG_SCRATCH0 |
| std r10,PACA_EXGEN+EX_R10(r13) |
| std r11,PACA_EXGEN+EX_R9(r13) |
| std r12,PACA_EXGEN+EX_R13(r13) |
| EXCEPTION_PROLOG_PSERIES_1(data_access_common) |
| FTR_SECTION_ELSE |
| EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, data_access_common) |
| ALT_FTR_SECTION_END_IFCLR(CPU_FTR_SLB) |
| |
| . = 0x380 |
| .globl data_access_slb_pSeries |
| data_access_slb_pSeries: |
| HMT_MEDIUM |
| DO_KVM 0x380 |
| mtspr SPRN_SPRG_SCRATCH0,r13 |
| mfspr r13,SPRN_SPRG_PACA /* get paca address into r13 */ |
| std r3,PACA_EXSLB+EX_R3(r13) |
| mfspr r3,SPRN_DAR |
| std r9,PACA_EXSLB+EX_R9(r13) /* save r9 - r12 */ |
| mfcr r9 |
| #ifdef __DISABLED__ |
| /* Keep that around for when we re-implement dynamic VSIDs */ |
| cmpdi r3,0 |
| bge slb_miss_user_pseries |
| #endif /* __DISABLED__ */ |
| std r10,PACA_EXSLB+EX_R10(r13) |
| std r11,PACA_EXSLB+EX_R11(r13) |
| std r12,PACA_EXSLB+EX_R12(r13) |
| mfspr r10,SPRN_SPRG_SCRATCH0 |
| std r10,PACA_EXSLB+EX_R13(r13) |
| mfspr r12,SPRN_SRR1 /* and SRR1 */ |
| #ifndef CONFIG_RELOCATABLE |
| b .slb_miss_realmode |
| #else |
| /* |
| * We can't just use a direct branch to .slb_miss_realmode |
| * because the distance from here to there depends on where |
| * the kernel ends up being put. |
| */ |
| mfctr r11 |
| ld r10,PACAKBASE(r13) |
| LOAD_HANDLER(r10, .slb_miss_realmode) |
| mtctr r10 |
| bctr |
| #endif |
| |
| STD_EXCEPTION_PSERIES(0x400, instruction_access) |
| |
| . = 0x480 |
| .globl instruction_access_slb_pSeries |
| instruction_access_slb_pSeries: |
| HMT_MEDIUM |
| DO_KVM 0x480 |
| mtspr SPRN_SPRG_SCRATCH0,r13 |
| mfspr r13,SPRN_SPRG_PACA /* get paca address into r13 */ |
| std r3,PACA_EXSLB+EX_R3(r13) |
| mfspr r3,SPRN_SRR0 /* SRR0 is faulting address */ |
| std r9,PACA_EXSLB+EX_R9(r13) /* save r9 - r12 */ |
| mfcr r9 |
| #ifdef __DISABLED__ |
| /* Keep that around for when we re-implement dynamic VSIDs */ |
| cmpdi r3,0 |
| bge slb_miss_user_pseries |
| #endif /* __DISABLED__ */ |
| std r10,PACA_EXSLB+EX_R10(r13) |
| std r11,PACA_EXSLB+EX_R11(r13) |
| std r12,PACA_EXSLB+EX_R12(r13) |
| mfspr r10,SPRN_SPRG_SCRATCH0 |
| std r10,PACA_EXSLB+EX_R13(r13) |
| mfspr r12,SPRN_SRR1 /* and SRR1 */ |
| #ifndef CONFIG_RELOCATABLE |
| b .slb_miss_realmode |
| #else |
| mfctr r11 |
| ld r10,PACAKBASE(r13) |
| LOAD_HANDLER(r10, .slb_miss_realmode) |
| mtctr r10 |
| bctr |
| #endif |
| |
| MASKABLE_EXCEPTION_PSERIES(0x500, hardware_interrupt) |
| STD_EXCEPTION_PSERIES(0x600, alignment) |
| STD_EXCEPTION_PSERIES(0x700, program_check) |
| STD_EXCEPTION_PSERIES(0x800, fp_unavailable) |
| MASKABLE_EXCEPTION_PSERIES(0x900, decrementer) |
| STD_EXCEPTION_PSERIES(0xa00, trap_0a) |
| STD_EXCEPTION_PSERIES(0xb00, trap_0b) |
| |
| . = 0xc00 |
| .globl system_call_pSeries |
| system_call_pSeries: |
| HMT_MEDIUM |
| DO_KVM 0xc00 |
| BEGIN_FTR_SECTION |
| cmpdi r0,0x1ebe |
| beq- 1f |
| END_FTR_SECTION_IFSET(CPU_FTR_REAL_LE) |
| mr r9,r13 |
| mfspr r13,SPRN_SPRG_PACA |
| mfspr r11,SPRN_SRR0 |
| ld r12,PACAKBASE(r13) |
| ld r10,PACAKMSR(r13) |
| LOAD_HANDLER(r12, system_call_entry) |
| mtspr SPRN_SRR0,r12 |
| mfspr r12,SPRN_SRR1 |
| mtspr SPRN_SRR1,r10 |
| rfid |
| b . /* prevent speculative execution */ |
| |
| /* Fast LE/BE switch system call */ |
| 1: mfspr r12,SPRN_SRR1 |
| xori r12,r12,MSR_LE |
| mtspr SPRN_SRR1,r12 |
| rfid /* return to userspace */ |
| b . |
| |
| STD_EXCEPTION_PSERIES(0xd00, single_step) |
| STD_EXCEPTION_PSERIES(0xe00, trap_0e) |
| |
| /* We need to deal with the Altivec unavailable exception |
| * here which is at 0xf20, thus in the middle of the |
| * prolog code of the PerformanceMonitor one. A little |
| * trickery is thus necessary |
| */ |
| performance_monitor_pSeries_1: |
| . = 0xf00 |
| DO_KVM 0xf00 |
| b performance_monitor_pSeries |
| |
| altivec_unavailable_pSeries_1: |
| . = 0xf20 |
| DO_KVM 0xf20 |
| b altivec_unavailable_pSeries |
| |
| vsx_unavailable_pSeries_1: |
| . = 0xf40 |
| DO_KVM 0xf40 |
| b vsx_unavailable_pSeries |
| |
| #ifdef CONFIG_CBE_RAS |
| HSTD_EXCEPTION_PSERIES(0x1200, cbe_system_error) |
| #endif /* CONFIG_CBE_RAS */ |
| STD_EXCEPTION_PSERIES(0x1300, instruction_breakpoint) |
| #ifdef CONFIG_CBE_RAS |
| HSTD_EXCEPTION_PSERIES(0x1600, cbe_maintenance) |
| #endif /* CONFIG_CBE_RAS */ |
| STD_EXCEPTION_PSERIES(0x1700, altivec_assist) |
| #ifdef CONFIG_CBE_RAS |
| HSTD_EXCEPTION_PSERIES(0x1800, cbe_thermal) |
| #endif /* CONFIG_CBE_RAS */ |
| |
| . = 0x3000 |
| |
| /*** pSeries interrupt support ***/ |
| |
| /* moved from 0xf00 */ |
| STD_EXCEPTION_PSERIES(., performance_monitor) |
| STD_EXCEPTION_PSERIES(., altivec_unavailable) |
| STD_EXCEPTION_PSERIES(., vsx_unavailable) |
| |
| /* |
| * An interrupt came in while soft-disabled; clear EE in SRR1, |
| * clear paca->hard_enabled and return. |
| */ |
| masked_interrupt: |
| stb r10,PACAHARDIRQEN(r13) |
| mtcrf 0x80,r9 |
| ld r9,PACA_EXGEN+EX_R9(r13) |
| mfspr r10,SPRN_SRR1 |
| rldicl r10,r10,48,1 /* clear MSR_EE */ |
| rotldi r10,r10,16 |
| mtspr SPRN_SRR1,r10 |
| ld r10,PACA_EXGEN+EX_R10(r13) |
| mfspr r13,SPRN_SPRG_SCRATCH0 |
| rfid |
| b . |
| |
| .align 7 |
| do_stab_bolted_pSeries: |
| std r11,PACA_EXSLB+EX_R11(r13) |
| std r12,PACA_EXSLB+EX_R12(r13) |
| mfspr r10,SPRN_SPRG_SCRATCH0 |
| std r10,PACA_EXSLB+EX_R13(r13) |
| EXCEPTION_PROLOG_PSERIES_1(.do_stab_bolted) |
| |
| #ifdef CONFIG_PPC_PSERIES |
| /* |
| * Vectors for the FWNMI option. Share common code. |
| */ |
| .globl system_reset_fwnmi |
| .align 7 |
| system_reset_fwnmi: |
| HMT_MEDIUM |
| mtspr SPRN_SPRG_SCRATCH0,r13 /* save r13 */ |
| EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, system_reset_common) |
| |
| .globl machine_check_fwnmi |
| .align 7 |
| machine_check_fwnmi: |
| HMT_MEDIUM |
| mtspr SPRN_SPRG_SCRATCH0,r13 /* save r13 */ |
| EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common) |
| |
| #endif /* CONFIG_PPC_PSERIES */ |
| |
| #ifdef __DISABLED__ |
| /* |
| * This is used for when the SLB miss handler has to go virtual, |
| * which doesn't happen for now anymore but will once we re-implement |
| * dynamic VSIDs for shared page tables |
| */ |
| slb_miss_user_pseries: |
| std r10,PACA_EXGEN+EX_R10(r13) |
| std r11,PACA_EXGEN+EX_R11(r13) |
| std r12,PACA_EXGEN+EX_R12(r13) |
| mfspr r10,SPRG_SCRATCH0 |
| ld r11,PACA_EXSLB+EX_R9(r13) |
| ld r12,PACA_EXSLB+EX_R3(r13) |
| std r10,PACA_EXGEN+EX_R13(r13) |
| std r11,PACA_EXGEN+EX_R9(r13) |
| std r12,PACA_EXGEN+EX_R3(r13) |
| clrrdi r12,r13,32 |
| mfmsr r10 |
| mfspr r11,SRR0 /* save SRR0 */ |
| ori r12,r12,slb_miss_user_common@l /* virt addr of handler */ |
| ori r10,r10,MSR_IR|MSR_DR|MSR_RI |
| mtspr SRR0,r12 |
| mfspr r12,SRR1 /* and SRR1 */ |
| mtspr SRR1,r10 |
| rfid |
| b . /* prevent spec. execution */ |
| #endif /* __DISABLED__ */ |
| |
| .align 7 |
| .globl __end_interrupts |
| __end_interrupts: |
| |
| /* |
| * Code from here down to __end_handlers is invoked from the |
| * exception prologs above. Because the prologs assemble the |
| * addresses of these handlers using the LOAD_HANDLER macro, |
| * which uses an addi instruction, these handlers must be in |
| * the first 32k of the kernel image. |
| */ |
| |
| /*** Common interrupt handlers ***/ |
| |
| STD_EXCEPTION_COMMON(0x100, system_reset, .system_reset_exception) |
| |
| /* |
| * Machine check is different because we use a different |
| * save area: PACA_EXMC instead of PACA_EXGEN. |
| */ |
| .align 7 |
| .globl machine_check_common |
| machine_check_common: |
| EXCEPTION_PROLOG_COMMON(0x200, PACA_EXMC) |
| FINISH_NAP |
| DISABLE_INTS |
| bl .save_nvgprs |
| addi r3,r1,STACK_FRAME_OVERHEAD |
| bl .machine_check_exception |
| b .ret_from_except |
| |
| STD_EXCEPTION_COMMON_LITE(0x900, decrementer, .timer_interrupt) |
| STD_EXCEPTION_COMMON(0xa00, trap_0a, .unknown_exception) |
| STD_EXCEPTION_COMMON(0xb00, trap_0b, .unknown_exception) |
| STD_EXCEPTION_COMMON(0xd00, single_step, .single_step_exception) |
| STD_EXCEPTION_COMMON(0xe00, trap_0e, .unknown_exception) |
| STD_EXCEPTION_COMMON_IDLE(0xf00, performance_monitor, .performance_monitor_exception) |
| STD_EXCEPTION_COMMON(0x1300, instruction_breakpoint, .instruction_breakpoint_exception) |
| #ifdef CONFIG_ALTIVEC |
| STD_EXCEPTION_COMMON(0x1700, altivec_assist, .altivec_assist_exception) |
| #else |
| STD_EXCEPTION_COMMON(0x1700, altivec_assist, .unknown_exception) |
| #endif |
| #ifdef CONFIG_CBE_RAS |
| STD_EXCEPTION_COMMON(0x1200, cbe_system_error, .cbe_system_error_exception) |
| STD_EXCEPTION_COMMON(0x1600, cbe_maintenance, .cbe_maintenance_exception) |
| STD_EXCEPTION_COMMON(0x1800, cbe_thermal, .cbe_thermal_exception) |
| #endif /* CONFIG_CBE_RAS */ |
| |
| .align 7 |
| system_call_entry: |
| b system_call_common |
| |
| /* |
| * Here we have detected that the kernel stack pointer is bad. |
| * R9 contains the saved CR, r13 points to the paca, |
| * r10 contains the (bad) kernel stack pointer, |
| * r11 and r12 contain the saved SRR0 and SRR1. |
| * We switch to using an emergency stack, save the registers there, |
| * and call kernel_bad_stack(), which panics. |
| */ |
| bad_stack: |
| ld r1,PACAEMERGSP(r13) |
| subi r1,r1,64+INT_FRAME_SIZE |
| std r9,_CCR(r1) |
| std r10,GPR1(r1) |
| std r11,_NIP(r1) |
| std r12,_MSR(r1) |
| mfspr r11,SPRN_DAR |
| mfspr r12,SPRN_DSISR |
| std r11,_DAR(r1) |
| std r12,_DSISR(r1) |
| mflr r10 |
| mfctr r11 |
| mfxer r12 |
| std r10,_LINK(r1) |
| std r11,_CTR(r1) |
| std r12,_XER(r1) |
| SAVE_GPR(0,r1) |
| SAVE_GPR(2,r1) |
| SAVE_4GPRS(3,r1) |
| SAVE_2GPRS(7,r1) |
| SAVE_10GPRS(12,r1) |
| SAVE_10GPRS(22,r1) |
| lhz r12,PACA_TRAP_SAVE(r13) |
| std r12,_TRAP(r1) |
| addi r11,r1,INT_FRAME_SIZE |
| std r11,0(r1) |
| li r12,0 |
| std r12,0(r11) |
| ld r2,PACATOC(r13) |
| 1: addi r3,r1,STACK_FRAME_OVERHEAD |
| bl .kernel_bad_stack |
| b 1b |
| |
| /* |
| * Here r13 points to the paca, r9 contains the saved CR, |
| * SRR0 and SRR1 are saved in r11 and r12, |
| * r9 - r13 are saved in paca->exgen. |
| */ |
| .align 7 |
| .globl data_access_common |
| data_access_common: |
| mfspr r10,SPRN_DAR |
| std r10,PACA_EXGEN+EX_DAR(r13) |
| mfspr r10,SPRN_DSISR |
| stw r10,PACA_EXGEN+EX_DSISR(r13) |
| EXCEPTION_PROLOG_COMMON(0x300, PACA_EXGEN) |
| ld r3,PACA_EXGEN+EX_DAR(r13) |
| lwz r4,PACA_EXGEN+EX_DSISR(r13) |
| li r5,0x300 |
| b .do_hash_page /* Try to handle as hpte fault */ |
| |
| .align 7 |
| .globl instruction_access_common |
| instruction_access_common: |
| EXCEPTION_PROLOG_COMMON(0x400, PACA_EXGEN) |
| ld r3,_NIP(r1) |
| andis. r4,r12,0x5820 |
| li r5,0x400 |
| b .do_hash_page /* Try to handle as hpte fault */ |
| |
| /* |
| * Here is the common SLB miss user that is used when going to virtual |
| * mode for SLB misses, that is currently not used |
| */ |
| #ifdef __DISABLED__ |
| .align 7 |
| .globl slb_miss_user_common |
| slb_miss_user_common: |
| mflr r10 |
| std r3,PACA_EXGEN+EX_DAR(r13) |
| stw r9,PACA_EXGEN+EX_CCR(r13) |
| std r10,PACA_EXGEN+EX_LR(r13) |
| std r11,PACA_EXGEN+EX_SRR0(r13) |
| bl .slb_allocate_user |
| |
| ld r10,PACA_EXGEN+EX_LR(r13) |
| ld r3,PACA_EXGEN+EX_R3(r13) |
| lwz r9,PACA_EXGEN+EX_CCR(r13) |
| ld r11,PACA_EXGEN+EX_SRR0(r13) |
| mtlr r10 |
| beq- slb_miss_fault |
| |
| andi. r10,r12,MSR_RI /* check for unrecoverable exception */ |
| beq- unrecov_user_slb |
| mfmsr r10 |
| |
| .machine push |
| .machine "power4" |
| mtcrf 0x80,r9 |
| .machine pop |
| |
| clrrdi r10,r10,2 /* clear RI before setting SRR0/1 */ |
| mtmsrd r10,1 |
| |
| mtspr SRR0,r11 |
| mtspr SRR1,r12 |
| |
| ld r9,PACA_EXGEN+EX_R9(r13) |
| ld r10,PACA_EXGEN+EX_R10(r13) |
| ld r11,PACA_EXGEN+EX_R11(r13) |
| ld r12,PACA_EXGEN+EX_R12(r13) |
| ld r13,PACA_EXGEN+EX_R13(r13) |
| rfid |
| b . |
| |
| slb_miss_fault: |
| EXCEPTION_PROLOG_COMMON(0x380, PACA_EXGEN) |
| ld r4,PACA_EXGEN+EX_DAR(r13) |
| li r5,0 |
| std r4,_DAR(r1) |
| std r5,_DSISR(r1) |
| b handle_page_fault |
| |
| unrecov_user_slb: |
| EXCEPTION_PROLOG_COMMON(0x4200, PACA_EXGEN) |
| DISABLE_INTS |
| bl .save_nvgprs |
| 1: addi r3,r1,STACK_FRAME_OVERHEAD |
| bl .unrecoverable_exception |
| b 1b |
| |
| #endif /* __DISABLED__ */ |
| |
| |
| /* |
| * r13 points to the PACA, r9 contains the saved CR, |
| * r12 contain the saved SRR1, SRR0 is still ready for return |
| * r3 has the faulting address |
| * r9 - r13 are saved in paca->exslb. |
| * r3 is saved in paca->slb_r3 |
| * We assume we aren't going to take any exceptions during this procedure. |
| */ |
| _GLOBAL(slb_miss_realmode) |
| mflr r10 |
| #ifdef CONFIG_RELOCATABLE |
| mtctr r11 |
| #endif |
| |
| stw r9,PACA_EXSLB+EX_CCR(r13) /* save CR in exc. frame */ |
| std r10,PACA_EXSLB+EX_LR(r13) /* save LR */ |
| |
| bl .slb_allocate_realmode |
| |
| /* All done -- return from exception. */ |
| |
| ld r10,PACA_EXSLB+EX_LR(r13) |
| ld r3,PACA_EXSLB+EX_R3(r13) |
| lwz r9,PACA_EXSLB+EX_CCR(r13) /* get saved CR */ |
| #ifdef CONFIG_PPC_ISERIES |
| BEGIN_FW_FTR_SECTION |
| ld r11,PACALPPACAPTR(r13) |
| ld r11,LPPACASRR0(r11) /* get SRR0 value */ |
| END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) |
| #endif /* CONFIG_PPC_ISERIES */ |
| |
| mtlr r10 |
| |
| andi. r10,r12,MSR_RI /* check for unrecoverable exception */ |
| beq- 2f |
| |
| .machine push |
| .machine "power4" |
| mtcrf 0x80,r9 |
| mtcrf 0x01,r9 /* slb_allocate uses cr0 and cr7 */ |
| .machine pop |
| |
| #ifdef CONFIG_PPC_ISERIES |
| BEGIN_FW_FTR_SECTION |
| mtspr SPRN_SRR0,r11 |
| mtspr SPRN_SRR1,r12 |
| END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) |
| #endif /* CONFIG_PPC_ISERIES */ |
| ld r9,PACA_EXSLB+EX_R9(r13) |
| ld r10,PACA_EXSLB+EX_R10(r13) |
| ld r11,PACA_EXSLB+EX_R11(r13) |
| ld r12,PACA_EXSLB+EX_R12(r13) |
| ld r13,PACA_EXSLB+EX_R13(r13) |
| rfid |
| b . /* prevent speculative execution */ |
| |
| 2: |
| #ifdef CONFIG_PPC_ISERIES |
| BEGIN_FW_FTR_SECTION |
| b unrecov_slb |
| END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) |
| #endif /* CONFIG_PPC_ISERIES */ |
| mfspr r11,SPRN_SRR0 |
| ld r10,PACAKBASE(r13) |
| LOAD_HANDLER(r10,unrecov_slb) |
| mtspr SPRN_SRR0,r10 |
| ld r10,PACAKMSR(r13) |
| mtspr SPRN_SRR1,r10 |
| rfid |
| b . |
| |
| unrecov_slb: |
| EXCEPTION_PROLOG_COMMON(0x4100, PACA_EXSLB) |
| DISABLE_INTS |
| bl .save_nvgprs |
| 1: addi r3,r1,STACK_FRAME_OVERHEAD |
| bl .unrecoverable_exception |
| b 1b |
| |
| .align 7 |
| .globl hardware_interrupt_common |
| .globl hardware_interrupt_entry |
| hardware_interrupt_common: |
| EXCEPTION_PROLOG_COMMON(0x500, PACA_EXGEN) |
| FINISH_NAP |
| hardware_interrupt_entry: |
| DISABLE_INTS |
| BEGIN_FTR_SECTION |
| bl .ppc64_runlatch_on |
| END_FTR_SECTION_IFSET(CPU_FTR_CTRL) |
| addi r3,r1,STACK_FRAME_OVERHEAD |
| bl .do_IRQ |
| b .ret_from_except_lite |
| |
| #ifdef CONFIG_PPC_970_NAP |
| power4_fixup_nap: |
| andc r9,r9,r10 |
| std r9,TI_LOCAL_FLAGS(r11) |
| ld r10,_LINK(r1) /* make idle task do the */ |
| std r10,_NIP(r1) /* equivalent of a blr */ |
| blr |
| #endif |
| |
| .align 7 |
| .globl alignment_common |
| alignment_common: |
| mfspr r10,SPRN_DAR |
| std r10,PACA_EXGEN+EX_DAR(r13) |
| mfspr r10,SPRN_DSISR |
| stw r10,PACA_EXGEN+EX_DSISR(r13) |
| EXCEPTION_PROLOG_COMMON(0x600, PACA_EXGEN) |
| ld r3,PACA_EXGEN+EX_DAR(r13) |
| lwz r4,PACA_EXGEN+EX_DSISR(r13) |
| std r3,_DAR(r1) |
| std r4,_DSISR(r1) |
| bl .save_nvgprs |
| addi r3,r1,STACK_FRAME_OVERHEAD |
| ENABLE_INTS |
| bl .alignment_exception |
| b .ret_from_except |
| |
| .align 7 |
| .globl program_check_common |
| program_check_common: |
| EXCEPTION_PROLOG_COMMON(0x700, PACA_EXGEN) |
| bl .save_nvgprs |
| addi r3,r1,STACK_FRAME_OVERHEAD |
| ENABLE_INTS |
| bl .program_check_exception |
| b .ret_from_except |
| |
| .align 7 |
| .globl fp_unavailable_common |
| fp_unavailable_common: |
| EXCEPTION_PROLOG_COMMON(0x800, PACA_EXGEN) |
| bne 1f /* if from user, just load it up */ |
| bl .save_nvgprs |
| addi r3,r1,STACK_FRAME_OVERHEAD |
| ENABLE_INTS |
| bl .kernel_fp_unavailable_exception |
| BUG_OPCODE |
| 1: bl .load_up_fpu |
| b fast_exception_return |
| |
| .align 7 |
| .globl altivec_unavailable_common |
| altivec_unavailable_common: |
| EXCEPTION_PROLOG_COMMON(0xf20, PACA_EXGEN) |
| #ifdef CONFIG_ALTIVEC |
| BEGIN_FTR_SECTION |
| beq 1f |
| bl .load_up_altivec |
| b fast_exception_return |
| 1: |
| END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) |
| #endif |
| bl .save_nvgprs |
| addi r3,r1,STACK_FRAME_OVERHEAD |
| ENABLE_INTS |
| bl .altivec_unavailable_exception |
| b .ret_from_except |
| |
| .align 7 |
| .globl vsx_unavailable_common |
| vsx_unavailable_common: |
| EXCEPTION_PROLOG_COMMON(0xf40, PACA_EXGEN) |
| #ifdef CONFIG_VSX |
| BEGIN_FTR_SECTION |
| bne .load_up_vsx |
| 1: |
| END_FTR_SECTION_IFSET(CPU_FTR_VSX) |
| #endif |
| bl .save_nvgprs |
| addi r3,r1,STACK_FRAME_OVERHEAD |
| ENABLE_INTS |
| bl .vsx_unavailable_exception |
| b .ret_from_except |
| |
| .align 7 |
| .globl __end_handlers |
| __end_handlers: |
| |
| /* |
| * Return from an exception with minimal checks. |
| * The caller is assumed to have done EXCEPTION_PROLOG_COMMON. |
| * If interrupts have been enabled, or anything has been |
| * done that might have changed the scheduling status of |
| * any task or sent any task a signal, you should use |
| * ret_from_except or ret_from_except_lite instead of this. |
| */ |
| fast_exc_return_irq: /* restores irq state too */ |
| ld r3,SOFTE(r1) |
| TRACE_AND_RESTORE_IRQ(r3); |
| ld r12,_MSR(r1) |
| rldicl r4,r12,49,63 /* get MSR_EE to LSB */ |
| stb r4,PACAHARDIRQEN(r13) /* restore paca->hard_enabled */ |
| b 1f |
| |
| .globl fast_exception_return |
| fast_exception_return: |
| ld r12,_MSR(r1) |
| 1: ld r11,_NIP(r1) |
| andi. r3,r12,MSR_RI /* check if RI is set */ |
| beq- unrecov_fer |
| |
| #ifdef CONFIG_VIRT_CPU_ACCOUNTING |
| andi. r3,r12,MSR_PR |
| beq 2f |
| ACCOUNT_CPU_USER_EXIT(r3, r4) |
| 2: |
| #endif |
| |
| ld r3,_CCR(r1) |
| ld r4,_LINK(r1) |
| ld r5,_CTR(r1) |
| ld r6,_XER(r1) |
| mtcr r3 |
| mtlr r4 |
| mtctr r5 |
| mtxer r6 |
| REST_GPR(0, r1) |
| REST_8GPRS(2, r1) |
| |
| mfmsr r10 |
| rldicl r10,r10,48,1 /* clear EE */ |
| rldicr r10,r10,16,61 /* clear RI (LE is 0 already) */ |
| mtmsrd r10,1 |
| |
| mtspr SPRN_SRR1,r12 |
| mtspr SPRN_SRR0,r11 |
| REST_4GPRS(10, r1) |
| ld r1,GPR1(r1) |
| rfid |
| b . /* prevent speculative execution */ |
| |
| unrecov_fer: |
| bl .save_nvgprs |
| 1: addi r3,r1,STACK_FRAME_OVERHEAD |
| bl .unrecoverable_exception |
| b 1b |
| |
| |
| /* |
| * Hash table stuff |
| */ |
| .align 7 |
| _STATIC(do_hash_page) |
| std r3,_DAR(r1) |
| std r4,_DSISR(r1) |
| |
| andis. r0,r4,0xa450 /* weird error? */ |
| bne- handle_page_fault /* if not, try to insert a HPTE */ |
| BEGIN_FTR_SECTION |
| andis. r0,r4,0x0020 /* Is it a segment table fault? */ |
| bne- do_ste_alloc /* If so handle it */ |
| END_FTR_SECTION_IFCLR(CPU_FTR_SLB) |
| |
| clrrdi r11,r1,THREAD_SHIFT |
| lwz r0,TI_PREEMPT(r11) /* If we're in an "NMI" */ |
| andis. r0,r0,NMI_MASK@h /* (i.e. an irq when soft-disabled) */ |
| bne 77f /* then don't call hash_page now */ |
| |
| /* |
| * On iSeries, we soft-disable interrupts here, then |
| * hard-enable interrupts so that the hash_page code can spin on |
| * the hash_table_lock without problems on a shared processor. |
| */ |
| DISABLE_INTS |
| |
| /* |
| * Currently, trace_hardirqs_off() will be called by DISABLE_INTS |
| * and will clobber volatile registers when irq tracing is enabled |
| * so we need to reload them. It may be possible to be smarter here |
| * and move the irq tracing elsewhere but let's keep it simple for |
| * now |
| */ |
| #ifdef CONFIG_TRACE_IRQFLAGS |
| ld r3,_DAR(r1) |
| ld r4,_DSISR(r1) |
| ld r5,_TRAP(r1) |
| ld r12,_MSR(r1) |
| clrrdi r5,r5,4 |
| #endif /* CONFIG_TRACE_IRQFLAGS */ |
| /* |
| * We need to set the _PAGE_USER bit if MSR_PR is set or if we are |
| * accessing a userspace segment (even from the kernel). We assume |
| * kernel addresses always have the high bit set. |
| */ |
| rlwinm r4,r4,32-25+9,31-9,31-9 /* DSISR_STORE -> _PAGE_RW */ |
| rotldi r0,r3,15 /* Move high bit into MSR_PR posn */ |
| orc r0,r12,r0 /* MSR_PR | ~high_bit */ |
| rlwimi r4,r0,32-13,30,30 /* becomes _PAGE_USER access bit */ |
| ori r4,r4,1 /* add _PAGE_PRESENT */ |
| rlwimi r4,r5,22+2,31-2,31-2 /* Set _PAGE_EXEC if trap is 0x400 */ |
| |
| /* |
| * r3 contains the faulting address |
| * r4 contains the required access permissions |
| * r5 contains the trap number |
| * |
| * at return r3 = 0 for success |
| */ |
| bl .hash_page /* build HPTE if possible */ |
| cmpdi r3,0 /* see if hash_page succeeded */ |
| |
| BEGIN_FW_FTR_SECTION |
| /* |
| * If we had interrupts soft-enabled at the point where the |
| * DSI/ISI occurred, and an interrupt came in during hash_page, |
| * handle it now. |
| * We jump to ret_from_except_lite rather than fast_exception_return |
| * because ret_from_except_lite will check for and handle pending |
| * interrupts if necessary. |
| */ |
| beq 13f |
| END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) |
| |
| BEGIN_FW_FTR_SECTION |
| /* |
| * Here we have interrupts hard-disabled, so it is sufficient |
| * to restore paca->{soft,hard}_enable and get out. |
| */ |
| beq fast_exc_return_irq /* Return from exception on success */ |
| END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES) |
| |
| /* For a hash failure, we don't bother re-enabling interrupts */ |
| ble- 12f |
| |
| /* |
| * hash_page couldn't handle it, set soft interrupt enable back |
| * to what it was before the trap. Note that .raw_local_irq_restore |
| * handles any interrupts pending at this point. |
| */ |
| ld r3,SOFTE(r1) |
| TRACE_AND_RESTORE_IRQ_PARTIAL(r3, 11f) |
| bl .raw_local_irq_restore |
| b 11f |
| |
| /* Here we have a page fault that hash_page can't handle. */ |
| handle_page_fault: |
| ENABLE_INTS |
| 11: ld r4,_DAR(r1) |
| ld r5,_DSISR(r1) |
| addi r3,r1,STACK_FRAME_OVERHEAD |
| bl .do_page_fault |
| cmpdi r3,0 |
| beq+ 13f |
| bl .save_nvgprs |
| mr r5,r3 |
| addi r3,r1,STACK_FRAME_OVERHEAD |
| lwz r4,_DAR(r1) |
| bl .bad_page_fault |
| b .ret_from_except |
| |
| 13: b .ret_from_except_lite |
| |
| /* We have a page fault that hash_page could handle but HV refused |
| * the PTE insertion |
| */ |
| 12: bl .save_nvgprs |
| mr r5,r3 |
| addi r3,r1,STACK_FRAME_OVERHEAD |
| ld r4,_DAR(r1) |
| bl .low_hash_fault |
| b .ret_from_except |
| |
| /* |
| * We come here as a result of a DSI at a point where we don't want |
| * to call hash_page, such as when we are accessing memory (possibly |
| * user memory) inside a PMU interrupt that occurred while interrupts |
| * were soft-disabled. We want to invoke the exception handler for |
| * the access, or panic if there isn't a handler. |
| */ |
| 77: bl .save_nvgprs |
| mr r4,r3 |
| addi r3,r1,STACK_FRAME_OVERHEAD |
| li r5,SIGSEGV |
| bl .bad_page_fault |
| b .ret_from_except |
| |
| /* here we have a segment miss */ |
| do_ste_alloc: |
| bl .ste_allocate /* try to insert stab entry */ |
| cmpdi r3,0 |
| bne- handle_page_fault |
| b fast_exception_return |
| |
| /* |
| * r13 points to the PACA, r9 contains the saved CR, |
| * r11 and r12 contain the saved SRR0 and SRR1. |
| * r9 - r13 are saved in paca->exslb. |
| * We assume we aren't going to take any exceptions during this procedure. |
| * We assume (DAR >> 60) == 0xc. |
| */ |
| .align 7 |
| _GLOBAL(do_stab_bolted) |
| stw r9,PACA_EXSLB+EX_CCR(r13) /* save CR in exc. frame */ |
| std r11,PACA_EXSLB+EX_SRR0(r13) /* save SRR0 in exc. frame */ |
| |
| /* Hash to the primary group */ |
| ld r10,PACASTABVIRT(r13) |
| mfspr r11,SPRN_DAR |
| srdi r11,r11,28 |
| rldimi r10,r11,7,52 /* r10 = first ste of the group */ |
| |
| /* Calculate VSID */ |
| /* This is a kernel address, so protovsid = ESID */ |
| ASM_VSID_SCRAMBLE(r11, r9, 256M) |
| rldic r9,r11,12,16 /* r9 = vsid << 12 */ |
| |
| /* Search the primary group for a free entry */ |
| 1: ld r11,0(r10) /* Test valid bit of the current ste */ |
| andi. r11,r11,0x80 |
| beq 2f |
| addi r10,r10,16 |
| andi. r11,r10,0x70 |
| bne 1b |
| |
| /* Stick for only searching the primary group for now. */ |
| /* At least for now, we use a very simple random castout scheme */ |
| /* Use the TB as a random number ; OR in 1 to avoid entry 0 */ |
| mftb r11 |
| rldic r11,r11,4,57 /* r11 = (r11 << 4) & 0x70 */ |
| ori r11,r11,0x10 |
| |
| /* r10 currently points to an ste one past the group of interest */ |
| /* make it point to the randomly selected entry */ |
| subi r10,r10,128 |
| or r10,r10,r11 /* r10 is the entry to invalidate */ |
| |
| isync /* mark the entry invalid */ |
| ld r11,0(r10) |
| rldicl r11,r11,56,1 /* clear the valid bit */ |
| rotldi r11,r11,8 |
| std r11,0(r10) |
| sync |
| |
| clrrdi r11,r11,28 /* Get the esid part of the ste */ |
| slbie r11 |
| |
| 2: std r9,8(r10) /* Store the vsid part of the ste */ |
| eieio |
| |
| mfspr r11,SPRN_DAR /* Get the new esid */ |
| clrrdi r11,r11,28 /* Permits a full 32b of ESID */ |
| ori r11,r11,0x90 /* Turn on valid and kp */ |
| std r11,0(r10) /* Put new entry back into the stab */ |
| |
| sync |
| |
| /* All done -- return from exception. */ |
| lwz r9,PACA_EXSLB+EX_CCR(r13) /* get saved CR */ |
| ld r11,PACA_EXSLB+EX_SRR0(r13) /* get saved SRR0 */ |
| |
| andi. r10,r12,MSR_RI |
| beq- unrecov_slb |
| |
| mtcrf 0x80,r9 /* restore CR */ |
| |
| mfmsr r10 |
| clrrdi r10,r10,2 |
| mtmsrd r10,1 |
| |
| mtspr SPRN_SRR0,r11 |
| mtspr SPRN_SRR1,r12 |
| ld r9,PACA_EXSLB+EX_R9(r13) |
| ld r10,PACA_EXSLB+EX_R10(r13) |
| ld r11,PACA_EXSLB+EX_R11(r13) |
| ld r12,PACA_EXSLB+EX_R12(r13) |
| ld r13,PACA_EXSLB+EX_R13(r13) |
| rfid |
| b . /* prevent speculative execution */ |
| |
| /* |
| * Space for CPU0's segment table. |
| * |
| * On iSeries, the hypervisor must fill in at least one entry before |
| * we get control (with relocate on). The address is given to the hv |
| * as a page number (see xLparMap below), so this must be at a |
| * fixed address (the linker can't compute (u64)&initial_stab >> |
| * PAGE_SHIFT). |
| */ |
| . = STAB0_OFFSET /* 0x6000 */ |
| .globl initial_stab |
| initial_stab: |
| .space 4096 |
| |
| #ifdef CONFIG_PPC_PSERIES |
| /* |
| * Data area reserved for FWNMI option. |
| * This address (0x7000) is fixed by the RPA. |
| */ |
| .= 0x7000 |
| .globl fwnmi_data_area |
| fwnmi_data_area: |
| #endif /* CONFIG_PPC_PSERIES */ |
| |
| /* iSeries does not use the FWNMI stuff, so it is safe to put |
| * this here, even if we later allow kernels that will boot on |
| * both pSeries and iSeries */ |
| #ifdef CONFIG_PPC_ISERIES |
| . = LPARMAP_PHYS |
| .globl xLparMap |
| xLparMap: |
| .quad HvEsidsToMap /* xNumberEsids */ |
| .quad HvRangesToMap /* xNumberRanges */ |
| .quad STAB0_PAGE /* xSegmentTableOffs */ |
| .zero 40 /* xRsvd */ |
| /* xEsids (HvEsidsToMap entries of 2 quads) */ |
| .quad PAGE_OFFSET_ESID /* xKernelEsid */ |
| .quad PAGE_OFFSET_VSID /* xKernelVsid */ |
| .quad VMALLOC_START_ESID /* xKernelEsid */ |
| .quad VMALLOC_START_VSID /* xKernelVsid */ |
| /* xRanges (HvRangesToMap entries of 3 quads) */ |
| .quad HvPagesToMap /* xPages */ |
| .quad 0 /* xOffset */ |
| .quad PAGE_OFFSET_VSID << (SID_SHIFT - HW_PAGE_SHIFT) /* xVPN */ |
| |
| #endif /* CONFIG_PPC_ISERIES */ |
| |
| #ifdef CONFIG_PPC_PSERIES |
| . = 0x8000 |
| #endif /* CONFIG_PPC_PSERIES */ |