| /* |
| * drivers/pci/setup-res.c |
| * |
| * Extruded from code written by |
| * Dave Rusling (david.rusling@reo.mts.dec.com) |
| * David Mosberger (davidm@cs.arizona.edu) |
| * David Miller (davem@redhat.com) |
| * |
| * Support routines for initializing a PCI subsystem. |
| */ |
| |
| /* fixed for multiple pci buses, 1999 Andrea Arcangeli <andrea@suse.de> */ |
| |
| /* |
| * Nov 2000, Ivan Kokshaysky <ink@jurassic.park.msu.ru> |
| * Resource sorting |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/export.h> |
| #include <linux/pci.h> |
| #include <linux/errno.h> |
| #include <linux/ioport.h> |
| #include <linux/cache.h> |
| #include <linux/slab.h> |
| #include "pci.h" |
| |
| |
| void pci_update_resource(struct pci_dev *dev, int resno) |
| { |
| struct pci_bus_region region; |
| u32 new, check, mask; |
| int reg; |
| enum pci_bar_type type; |
| struct resource *res = dev->resource + resno; |
| |
| /* |
| * Ignore resources for unimplemented BARs and unused resource slots |
| * for 64 bit BARs. |
| */ |
| if (!res->flags) |
| return; |
| |
| /* |
| * Ignore non-moveable resources. This might be legacy resources for |
| * which no functional BAR register exists or another important |
| * system resource we shouldn't move around. |
| */ |
| if (res->flags & IORESOURCE_PCI_FIXED) |
| return; |
| |
| pcibios_resource_to_bus(dev, ®ion, res); |
| |
| new = region.start | (res->flags & PCI_REGION_FLAG_MASK); |
| if (res->flags & IORESOURCE_IO) |
| mask = (u32)PCI_BASE_ADDRESS_IO_MASK; |
| else |
| mask = (u32)PCI_BASE_ADDRESS_MEM_MASK; |
| |
| reg = pci_resource_bar(dev, resno, &type); |
| if (!reg) |
| return; |
| if (type != pci_bar_unknown) { |
| if (!(res->flags & IORESOURCE_ROM_ENABLE)) |
| return; |
| new |= PCI_ROM_ADDRESS_ENABLE; |
| } |
| |
| pci_write_config_dword(dev, reg, new); |
| pci_read_config_dword(dev, reg, &check); |
| |
| if ((new ^ check) & mask) { |
| dev_err(&dev->dev, "BAR %d: error updating (%#08x != %#08x)\n", |
| resno, new, check); |
| } |
| |
| if (res->flags & IORESOURCE_MEM_64) { |
| new = region.start >> 16 >> 16; |
| pci_write_config_dword(dev, reg + 4, new); |
| pci_read_config_dword(dev, reg + 4, &check); |
| if (check != new) { |
| dev_err(&dev->dev, "BAR %d: error updating " |
| "(high %#08x != %#08x)\n", resno, new, check); |
| } |
| } |
| res->flags &= ~IORESOURCE_UNSET; |
| dev_dbg(&dev->dev, "BAR %d: set to %pR (PCI address [%#llx-%#llx])\n", |
| resno, res, (unsigned long long)region.start, |
| (unsigned long long)region.end); |
| } |
| |
| int pci_claim_resource(struct pci_dev *dev, int resource) |
| { |
| struct resource *res = &dev->resource[resource]; |
| struct resource *root, *conflict; |
| |
| root = pci_find_parent_resource(dev, res); |
| if (!root) { |
| dev_info(&dev->dev, "no compatible bridge window for %pR\n", |
| res); |
| return -EINVAL; |
| } |
| |
| conflict = request_resource_conflict(root, res); |
| if (conflict) { |
| dev_info(&dev->dev, |
| "address space collision: %pR conflicts with %s %pR\n", |
| res, conflict->name, conflict); |
| return -EBUSY; |
| } |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(pci_claim_resource); |
| |
| #ifdef CONFIG_PCI_QUIRKS |
| void pci_disable_bridge_window(struct pci_dev *dev) |
| { |
| dev_info(&dev->dev, "disabling bridge mem windows\n"); |
| |
| /* MMIO Base/Limit */ |
| pci_write_config_dword(dev, PCI_MEMORY_BASE, 0x0000fff0); |
| |
| /* Prefetchable MMIO Base/Limit */ |
| pci_write_config_dword(dev, PCI_PREF_LIMIT_UPPER32, 0); |
| pci_write_config_dword(dev, PCI_PREF_MEMORY_BASE, 0x0000fff0); |
| pci_write_config_dword(dev, PCI_PREF_BASE_UPPER32, 0xffffffff); |
| } |
| #endif /* CONFIG_PCI_QUIRKS */ |
| |
| |
| |
| static int __pci_assign_resource(struct pci_bus *bus, struct pci_dev *dev, |
| int resno, resource_size_t size, resource_size_t align) |
| { |
| struct resource *res = dev->resource + resno; |
| resource_size_t min; |
| int ret; |
| |
| min = (res->flags & IORESOURCE_IO) ? PCIBIOS_MIN_IO : PCIBIOS_MIN_MEM; |
| |
| /* First, try exact prefetching match.. */ |
| ret = pci_bus_alloc_resource(bus, res, size, align, min, |
| IORESOURCE_PREFETCH, |
| pcibios_align_resource, dev); |
| |
| if (ret < 0 && (res->flags & IORESOURCE_PREFETCH)) { |
| /* |
| * That failed. |
| * |
| * But a prefetching area can handle a non-prefetching |
| * window (it will just not perform as well). |
| */ |
| ret = pci_bus_alloc_resource(bus, res, size, align, min, 0, |
| pcibios_align_resource, dev); |
| } |
| return ret; |
| } |
| |
| /* |
| * Generic function that returns a value indicating that the device's |
| * original BIOS BAR address was not saved and so is not available for |
| * reinstatement. |
| * |
| * Can be over-ridden by architecture specific code that implements |
| * reinstatement functionality rather than leaving it disabled when |
| * normal allocation attempts fail. |
| */ |
| resource_size_t __weak pcibios_retrieve_fw_addr(struct pci_dev *dev, int idx) |
| { |
| return 0; |
| } |
| |
| static int pci_revert_fw_address(struct resource *res, struct pci_dev *dev, |
| int resno, resource_size_t size) |
| { |
| struct resource *root, *conflict; |
| resource_size_t fw_addr, start, end; |
| int ret = 0; |
| |
| fw_addr = pcibios_retrieve_fw_addr(dev, resno); |
| if (!fw_addr) |
| return 1; |
| |
| start = res->start; |
| end = res->end; |
| res->start = fw_addr; |
| res->end = res->start + size - 1; |
| |
| root = pci_find_parent_resource(dev, res); |
| if (!root) { |
| if (res->flags & IORESOURCE_IO) |
| root = &ioport_resource; |
| else |
| root = &iomem_resource; |
| } |
| |
| dev_info(&dev->dev, "BAR %d: trying firmware assignment %pR\n", |
| resno, res); |
| conflict = request_resource_conflict(root, res); |
| if (conflict) { |
| dev_info(&dev->dev, |
| "BAR %d: %pR conflicts with %s %pR\n", resno, |
| res, conflict->name, conflict); |
| res->start = start; |
| res->end = end; |
| ret = 1; |
| } |
| return ret; |
| } |
| |
| static int _pci_assign_resource(struct pci_dev *dev, int resno, int size, resource_size_t min_align) |
| { |
| struct resource *res = dev->resource + resno; |
| struct pci_bus *bus; |
| int ret; |
| char *type; |
| |
| bus = dev->bus; |
| while ((ret = __pci_assign_resource(bus, dev, resno, size, min_align))) { |
| if (!bus->parent || !bus->self->transparent) |
| break; |
| bus = bus->parent; |
| } |
| |
| if (ret) { |
| if (res->flags & IORESOURCE_MEM) |
| if (res->flags & IORESOURCE_PREFETCH) |
| type = "mem pref"; |
| else |
| type = "mem"; |
| else if (res->flags & IORESOURCE_IO) |
| type = "io"; |
| else |
| type = "unknown"; |
| dev_info(&dev->dev, |
| "BAR %d: can't assign %s (size %#llx)\n", |
| resno, type, (unsigned long long) resource_size(res)); |
| } |
| |
| return ret; |
| } |
| |
| int pci_reassign_resource(struct pci_dev *dev, int resno, resource_size_t addsize, |
| resource_size_t min_align) |
| { |
| struct resource *res = dev->resource + resno; |
| resource_size_t new_size; |
| int ret; |
| |
| if (!res->parent) { |
| dev_info(&dev->dev, "BAR %d: can't reassign an unassigned resource %pR " |
| "\n", resno, res); |
| return -EINVAL; |
| } |
| |
| /* already aligned with min_align */ |
| new_size = resource_size(res) + addsize; |
| ret = _pci_assign_resource(dev, resno, new_size, min_align); |
| if (!ret) { |
| res->flags &= ~IORESOURCE_STARTALIGN; |
| dev_info(&dev->dev, "BAR %d: reassigned %pR\n", resno, res); |
| if (resno < PCI_BRIDGE_RESOURCES) |
| pci_update_resource(dev, resno); |
| } |
| return ret; |
| } |
| |
| int pci_assign_resource(struct pci_dev *dev, int resno) |
| { |
| struct resource *res = dev->resource + resno; |
| resource_size_t align, size; |
| struct pci_bus *bus; |
| int ret; |
| |
| align = pci_resource_alignment(dev, res); |
| if (!align) { |
| dev_info(&dev->dev, "BAR %d: can't assign %pR " |
| "(bogus alignment)\n", resno, res); |
| return -EINVAL; |
| } |
| |
| bus = dev->bus; |
| size = resource_size(res); |
| ret = _pci_assign_resource(dev, resno, size, align); |
| |
| /* |
| * If we failed to assign anything, let's try the address |
| * where firmware left it. That at least has a chance of |
| * working, which is better than just leaving it disabled. |
| */ |
| if (ret < 0) |
| ret = pci_revert_fw_address(res, dev, resno, size); |
| |
| if (!ret) { |
| res->flags &= ~IORESOURCE_STARTALIGN; |
| dev_info(&dev->dev, "BAR %d: assigned %pR\n", resno, res); |
| if (resno < PCI_BRIDGE_RESOURCES) |
| pci_update_resource(dev, resno); |
| } |
| return ret; |
| } |
| |
| int pci_enable_resources(struct pci_dev *dev, int mask) |
| { |
| u16 cmd, old_cmd; |
| int i; |
| struct resource *r; |
| |
| pci_read_config_word(dev, PCI_COMMAND, &cmd); |
| old_cmd = cmd; |
| |
| for (i = 0; i < PCI_NUM_RESOURCES; i++) { |
| if (!(mask & (1 << i))) |
| continue; |
| |
| r = &dev->resource[i]; |
| |
| if (!(r->flags & (IORESOURCE_IO | IORESOURCE_MEM))) |
| continue; |
| if ((i == PCI_ROM_RESOURCE) && |
| (!(r->flags & IORESOURCE_ROM_ENABLE))) |
| continue; |
| |
| if (!r->parent) { |
| dev_err(&dev->dev, "device not available " |
| "(can't reserve %pR)\n", r); |
| return -EINVAL; |
| } |
| |
| if (r->flags & IORESOURCE_IO) |
| cmd |= PCI_COMMAND_IO; |
| if (r->flags & IORESOURCE_MEM) |
| cmd |= PCI_COMMAND_MEMORY; |
| } |
| |
| if (cmd != old_cmd) { |
| dev_info(&dev->dev, "enabling device (%04x -> %04x)\n", |
| old_cmd, cmd); |
| pci_write_config_word(dev, PCI_COMMAND, cmd); |
| } |
| return 0; |
| } |