| #ifndef ASM_X86__IO_64_H |
| #define ASM_X86__IO_64_H |
| |
| |
| /* |
| * This file contains the definitions for the x86 IO instructions |
| * inb/inw/inl/outb/outw/outl and the "string versions" of the same |
| * (insb/insw/insl/outsb/outsw/outsl). You can also use "pausing" |
| * versions of the single-IO instructions (inb_p/inw_p/..). |
| * |
| * This file is not meant to be obfuscating: it's just complicated |
| * to (a) handle it all in a way that makes gcc able to optimize it |
| * as well as possible and (b) trying to avoid writing the same thing |
| * over and over again with slight variations and possibly making a |
| * mistake somewhere. |
| */ |
| |
| /* |
| * Thanks to James van Artsdalen for a better timing-fix than |
| * the two short jumps: using outb's to a nonexistent port seems |
| * to guarantee better timings even on fast machines. |
| * |
| * On the other hand, I'd like to be sure of a non-existent port: |
| * I feel a bit unsafe about using 0x80 (should be safe, though) |
| * |
| * Linus |
| */ |
| |
| /* |
| * Bit simplified and optimized by Jan Hubicka |
| * Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999. |
| * |
| * isa_memset_io, isa_memcpy_fromio, isa_memcpy_toio added, |
| * isa_read[wl] and isa_write[wl] fixed |
| * - Arnaldo Carvalho de Melo <acme@conectiva.com.br> |
| */ |
| |
| extern void native_io_delay(void); |
| |
| extern int io_delay_type; |
| extern void io_delay_init(void); |
| |
| #if defined(CONFIG_PARAVIRT) |
| #include <asm/paravirt.h> |
| #else |
| |
| static inline void slow_down_io(void) |
| { |
| native_io_delay(); |
| #ifdef REALLY_SLOW_IO |
| native_io_delay(); |
| native_io_delay(); |
| native_io_delay(); |
| #endif |
| } |
| #endif |
| |
| /* |
| * Talk about misusing macros.. |
| */ |
| #define __OUT1(s, x) \ |
| static inline void out##s(unsigned x value, unsigned short port) { |
| |
| #define __OUT2(s, s1, s2) \ |
| asm volatile ("out" #s " %" s1 "0,%" s2 "1" |
| |
| #ifndef REALLY_SLOW_IO |
| #define REALLY_SLOW_IO |
| #define UNSET_REALLY_SLOW_IO |
| #endif |
| |
| #define __OUT(s, s1, x) \ |
| __OUT1(s, x) __OUT2(s, s1, "w") : : "a" (value), "Nd" (port)); \ |
| } \ |
| __OUT1(s##_p, x) __OUT2(s, s1, "w") : : "a" (value), "Nd" (port)); \ |
| slow_down_io(); \ |
| } |
| |
| #define __IN1(s) \ |
| static inline RETURN_TYPE in##s(unsigned short port) \ |
| { \ |
| RETURN_TYPE _v; |
| |
| #define __IN2(s, s1, s2) \ |
| asm volatile ("in" #s " %" s2 "1,%" s1 "0" |
| |
| #define __IN(s, s1, i...) \ |
| __IN1(s) __IN2(s, s1, "w") : "=a" (_v) : "Nd" (port), ##i); \ |
| return _v; \ |
| } \ |
| __IN1(s##_p) __IN2(s, s1, "w") : "=a" (_v) : "Nd" (port), ##i); \ |
| slow_down_io(); \ |
| return _v; } |
| |
| #ifdef UNSET_REALLY_SLOW_IO |
| #undef REALLY_SLOW_IO |
| #endif |
| |
| #define __INS(s) \ |
| static inline void ins##s(unsigned short port, void *addr, \ |
| unsigned long count) \ |
| { \ |
| asm volatile ("rep ; ins" #s \ |
| : "=D" (addr), "=c" (count) \ |
| : "d" (port), "0" (addr), "1" (count)); \ |
| } |
| |
| #define __OUTS(s) \ |
| static inline void outs##s(unsigned short port, const void *addr, \ |
| unsigned long count) \ |
| { \ |
| asm volatile ("rep ; outs" #s \ |
| : "=S" (addr), "=c" (count) \ |
| : "d" (port), "0" (addr), "1" (count)); \ |
| } |
| |
| #define RETURN_TYPE unsigned char |
| __IN(b, "") |
| #undef RETURN_TYPE |
| #define RETURN_TYPE unsigned short |
| __IN(w, "") |
| #undef RETURN_TYPE |
| #define RETURN_TYPE unsigned int |
| __IN(l, "") |
| #undef RETURN_TYPE |
| |
| __OUT(b, "b", char) |
| __OUT(w, "w", short) |
| __OUT(l, , int) |
| |
| __INS(b) |
| __INS(w) |
| __INS(l) |
| |
| __OUTS(b) |
| __OUTS(w) |
| __OUTS(l) |
| |
| #define IO_SPACE_LIMIT 0xffff |
| |
| #if defined(__KERNEL__) && defined(__x86_64__) |
| |
| #include <linux/vmalloc.h> |
| |
| #ifndef __i386__ |
| /* |
| * Change virtual addresses to physical addresses and vv. |
| * These are pretty trivial |
| */ |
| static inline unsigned long virt_to_phys(volatile void *address) |
| { |
| return __pa(address); |
| } |
| |
| static inline void *phys_to_virt(unsigned long address) |
| { |
| return __va(address); |
| } |
| #endif |
| |
| /* |
| * Change "struct page" to physical address. |
| */ |
| #define page_to_phys(page) ((dma_addr_t)page_to_pfn(page) << PAGE_SHIFT) |
| |
| #include <asm-generic/iomap.h> |
| |
| extern void *early_ioremap(unsigned long addr, unsigned long size); |
| extern void early_iounmap(void *addr, unsigned long size); |
| |
| /* |
| * This one maps high address device memory and turns off caching for that area. |
| * it's useful if some control registers are in such an area and write combining |
| * or read caching is not desirable: |
| */ |
| extern void __iomem *ioremap_nocache(resource_size_t offset, unsigned long size); |
| extern void __iomem *ioremap_cache(resource_size_t offset, unsigned long size); |
| |
| /* |
| * The default ioremap() behavior is non-cached: |
| */ |
| static inline void __iomem *ioremap(resource_size_t offset, unsigned long size) |
| { |
| return ioremap_nocache(offset, size); |
| } |
| |
| extern void iounmap(volatile void __iomem *addr); |
| |
| extern void __iomem *fix_ioremap(unsigned idx, unsigned long phys); |
| |
| /* |
| * ISA I/O bus memory addresses are 1:1 with the physical address. |
| */ |
| #define isa_virt_to_bus virt_to_phys |
| #define isa_page_to_bus page_to_phys |
| #define isa_bus_to_virt phys_to_virt |
| |
| /* |
| * However PCI ones are not necessarily 1:1 and therefore these interfaces |
| * are forbidden in portable PCI drivers. |
| * |
| * Allow them on x86 for legacy drivers, though. |
| */ |
| #define virt_to_bus virt_to_phys |
| #define bus_to_virt phys_to_virt |
| |
| void __memcpy_fromio(void *, unsigned long, unsigned); |
| void __memcpy_toio(unsigned long, const void *, unsigned); |
| |
| static inline void memcpy_fromio(void *to, const volatile void __iomem *from, |
| unsigned len) |
| { |
| __memcpy_fromio(to, (unsigned long)from, len); |
| } |
| |
| static inline void memcpy_toio(volatile void __iomem *to, const void *from, |
| unsigned len) |
| { |
| __memcpy_toio((unsigned long)to, from, len); |
| } |
| |
| void memset_io(volatile void __iomem *a, int b, size_t c); |
| |
| /* |
| * ISA space is 'always mapped' on a typical x86 system, no need to |
| * explicitly ioremap() it. The fact that the ISA IO space is mapped |
| * to PAGE_OFFSET is pure coincidence - it does not mean ISA values |
| * are physical addresses. The following constant pointer can be |
| * used as the IO-area pointer (it can be iounmapped as well, so the |
| * analogy with PCI is quite large): |
| */ |
| #define __ISA_IO_base ((char __iomem *)(PAGE_OFFSET)) |
| |
| #define flush_write_buffers() |
| |
| extern int iommu_bio_merge; |
| #define BIO_VMERGE_BOUNDARY iommu_bio_merge |
| |
| /* |
| * Convert a virtual cached pointer to an uncached pointer |
| */ |
| #define xlate_dev_kmem_ptr(p) p |
| |
| #endif /* __KERNEL__ */ |
| |
| #endif /* ASM_X86__IO_64_H */ |