| menu "Processor selection" |
| |
| # |
| # Processor families |
| # |
| config CPU_SH2 |
| select SH_WRITETHROUGH if !CPU_SH2A |
| bool |
| |
| config CPU_SH2A |
| bool |
| select CPU_SH2 |
| |
| config CPU_SH3 |
| bool |
| select CPU_HAS_INTEVT |
| select CPU_HAS_SR_RB |
| |
| config CPU_SH4 |
| bool |
| select CPU_HAS_INTEVT |
| select CPU_HAS_SR_RB |
| select CPU_HAS_PTEA if (!CPU_SUBTYPE_ST40 && !CPU_SH4A) || CPU_SHX2 |
| |
| config CPU_SH4A |
| bool |
| select CPU_SH4 |
| |
| config CPU_SH4AL_DSP |
| bool |
| select CPU_SH4A |
| |
| config CPU_SUBTYPE_ST40 |
| bool |
| select CPU_SH4 |
| select CPU_HAS_INTC2_IRQ |
| |
| config CPU_SHX2 |
| bool |
| |
| # |
| # Processor subtypes |
| # |
| |
| comment "SH-2 Processor Support" |
| |
| config CPU_SUBTYPE_SH7604 |
| bool "Support SH7604 processor" |
| select CPU_SH2 |
| |
| config CPU_SUBTYPE_SH7619 |
| bool "Support SH7619 processor" |
| select CPU_SH2 |
| |
| comment "SH-2A Processor Support" |
| |
| config CPU_SUBTYPE_SH7206 |
| bool "Support SH7206 processor" |
| select CPU_SH2A |
| |
| comment "SH-3 Processor Support" |
| |
| config CPU_SUBTYPE_SH7300 |
| bool "Support SH7300 processor" |
| select CPU_SH3 |
| |
| config CPU_SUBTYPE_SH7705 |
| bool "Support SH7705 processor" |
| select CPU_SH3 |
| select CPU_HAS_IPR_IRQ |
| select CPU_HAS_PINT_IRQ |
| |
| config CPU_SUBTYPE_SH7706 |
| bool "Support SH7706 processor" |
| select CPU_SH3 |
| select CPU_HAS_IPR_IRQ |
| help |
| Select SH7706 if you have a 133 Mhz SH-3 HD6417706 CPU. |
| |
| config CPU_SUBTYPE_SH7707 |
| bool "Support SH7707 processor" |
| select CPU_SH3 |
| select CPU_HAS_PINT_IRQ |
| help |
| Select SH7707 if you have a 60 Mhz SH-3 HD6417707 CPU. |
| |
| config CPU_SUBTYPE_SH7708 |
| bool "Support SH7708 processor" |
| select CPU_SH3 |
| help |
| Select SH7708 if you have a 60 Mhz SH-3 HD6417708S or |
| if you have a 100 Mhz SH-3 HD6417708R CPU. |
| |
| config CPU_SUBTYPE_SH7709 |
| bool "Support SH7709 processor" |
| select CPU_SH3 |
| select CPU_HAS_IPR_IRQ |
| select CPU_HAS_PINT_IRQ |
| help |
| Select SH7709 if you have a 80 Mhz SH-3 HD6417709 CPU. |
| |
| config CPU_SUBTYPE_SH7710 |
| bool "Support SH7710 processor" |
| select CPU_SH3 |
| select CPU_HAS_IPR_IRQ |
| help |
| Select SH7710 if you have a SH3-DSP SH7710 CPU. |
| |
| config CPU_SUBTYPE_SH7712 |
| bool "Support SH7712 processor" |
| select CPU_SH3 |
| select CPU_HAS_IPR_IRQ |
| help |
| Select SH7712 if you have a SH3-DSP SH7712 CPU. |
| |
| comment "SH-4 Processor Support" |
| |
| config CPU_SUBTYPE_SH7750 |
| bool "Support SH7750 processor" |
| select CPU_SH4 |
| select CPU_HAS_IPR_IRQ |
| help |
| Select SH7750 if you have a 200 Mhz SH-4 HD6417750 CPU. |
| |
| config CPU_SUBTYPE_SH7091 |
| bool "Support SH7091 processor" |
| select CPU_SH4 |
| select CPU_SUBTYPE_SH7750 |
| help |
| Select SH7091 if you have an SH-4 based Sega device (such as |
| the Dreamcast, Naomi, and Naomi 2). |
| |
| config CPU_SUBTYPE_SH7750R |
| bool "Support SH7750R processor" |
| select CPU_SH4 |
| select CPU_SUBTYPE_SH7750 |
| select CPU_HAS_IPR_IRQ |
| |
| config CPU_SUBTYPE_SH7750S |
| bool "Support SH7750S processor" |
| select CPU_SH4 |
| select CPU_SUBTYPE_SH7750 |
| select CPU_HAS_IPR_IRQ |
| |
| config CPU_SUBTYPE_SH7751 |
| bool "Support SH7751 processor" |
| select CPU_SH4 |
| select CPU_HAS_IPR_IRQ |
| help |
| Select SH7751 if you have a 166 Mhz SH-4 HD6417751 CPU, |
| or if you have a HD6417751R CPU. |
| |
| config CPU_SUBTYPE_SH7751R |
| bool "Support SH7751R processor" |
| select CPU_SH4 |
| select CPU_SUBTYPE_SH7751 |
| select CPU_HAS_IPR_IRQ |
| |
| config CPU_SUBTYPE_SH7760 |
| bool "Support SH7760 processor" |
| select CPU_SH4 |
| select CPU_HAS_INTC2_IRQ |
| select CPU_HAS_IPR_IRQ |
| |
| config CPU_SUBTYPE_SH4_202 |
| bool "Support SH4-202 processor" |
| select CPU_SH4 |
| |
| comment "ST40 Processor Support" |
| |
| config CPU_SUBTYPE_ST40STB1 |
| bool "Support ST40STB1/ST40RA processors" |
| select CPU_SUBTYPE_ST40 |
| help |
| Select ST40STB1 if you have a ST40RA CPU. |
| This was previously called the ST40STB1, hence the option name. |
| |
| config CPU_SUBTYPE_ST40GX1 |
| bool "Support ST40GX1 processor" |
| select CPU_SUBTYPE_ST40 |
| help |
| Select ST40GX1 if you have a ST40GX1 CPU. |
| |
| comment "SH-4A Processor Support" |
| |
| config CPU_SUBTYPE_SH7770 |
| bool "Support SH7770 processor" |
| select CPU_SH4A |
| |
| config CPU_SUBTYPE_SH7780 |
| bool "Support SH7780 processor" |
| select CPU_SH4A |
| select CPU_HAS_INTC2_IRQ |
| |
| config CPU_SUBTYPE_SH7785 |
| bool "Support SH7785 processor" |
| select CPU_SH4A |
| select CPU_SHX2 |
| select CPU_HAS_INTC2_IRQ |
| |
| comment "SH4AL-DSP Processor Support" |
| |
| config CPU_SUBTYPE_SH73180 |
| bool "Support SH73180 processor" |
| select CPU_SH4AL_DSP |
| |
| config CPU_SUBTYPE_SH7343 |
| bool "Support SH7343 processor" |
| select CPU_SH4AL_DSP |
| |
| config CPU_SUBTYPE_SH7722 |
| bool "Support SH7722 processor" |
| select CPU_SH4AL_DSP |
| select CPU_SHX2 |
| select CPU_HAS_IPR_IRQ |
| |
| endmenu |
| |
| menu "Memory management options" |
| |
| config QUICKLIST |
| def_bool y |
| |
| config MMU |
| bool "Support for memory management hardware" |
| depends on !CPU_SH2 |
| default y |
| help |
| Some SH processors (such as SH-2/SH-2A) lack an MMU. In order to |
| boot on these systems, this option must not be set. |
| |
| On other systems (such as the SH-3 and 4) where an MMU exists, |
| turning this off will boot the kernel on these machines with the |
| MMU implicitly switched off. |
| |
| config PAGE_OFFSET |
| hex |
| default "0x80000000" if MMU |
| default "0x00000000" |
| |
| config MEMORY_START |
| hex "Physical memory start address" |
| default "0x08000000" |
| ---help--- |
| Computers built with Hitachi SuperH processors always |
| map the ROM starting at address zero. But the processor |
| does not specify the range that RAM takes. |
| |
| The physical memory (RAM) start address will be automatically |
| set to 08000000. Other platforms, such as the Solution Engine |
| boards typically map RAM at 0C000000. |
| |
| Tweak this only when porting to a new machine which does not |
| already have a defconfig. Changing it from the known correct |
| value on any of the known systems will only lead to disaster. |
| |
| config MEMORY_SIZE |
| hex "Physical memory size" |
| default "0x00400000" |
| help |
| This sets the default memory size assumed by your SH kernel. It can |
| be overridden as normal by the 'mem=' argument on the kernel command |
| line. If unsure, consult your board specifications or just leave it |
| as 0x00400000 which was the default value before this became |
| configurable. |
| |
| config 32BIT |
| bool "Support 32-bit physical addressing through PMB" |
| depends on CPU_SH4A && MMU && (!X2TLB || BROKEN) |
| default y |
| help |
| If you say Y here, physical addressing will be extended to |
| 32-bits through the SH-4A PMB. If this is not set, legacy |
| 29-bit physical addressing will be used. |
| |
| config X2TLB |
| bool "Enable extended TLB mode" |
| depends on CPU_SHX2 && MMU && EXPERIMENTAL |
| help |
| Selecting this option will enable the extended mode of the SH-X2 |
| TLB. For legacy SH-X behaviour and interoperability, say N. For |
| all of the fun new features and a willingless to submit bug reports, |
| say Y. |
| |
| config VSYSCALL |
| bool "Support vsyscall page" |
| depends on MMU |
| default y |
| help |
| This will enable support for the kernel mapping a vDSO page |
| in process space, and subsequently handing down the entry point |
| to the libc through the ELF auxiliary vector. |
| |
| From the kernel side this is used for the signal trampoline. |
| For systems with an MMU that can afford to give up a page, |
| (the default value) say Y. |
| |
| config NODES_SHIFT |
| int |
| default "1" |
| depends on NEED_MULTIPLE_NODES |
| |
| config ARCH_FLATMEM_ENABLE |
| def_bool y |
| |
| config MAX_ACTIVE_REGIONS |
| int |
| default "1" |
| |
| config ARCH_POPULATES_NODE_MAP |
| def_bool y |
| |
| choice |
| prompt "Kernel page size" |
| default PAGE_SIZE_4KB |
| |
| config PAGE_SIZE_4KB |
| bool "4kB" |
| help |
| This is the default page size used by all SuperH CPUs. |
| |
| config PAGE_SIZE_8KB |
| bool "8kB" |
| depends on EXPERIMENTAL && X2TLB |
| help |
| This enables 8kB pages as supported by SH-X2 and later MMUs. |
| |
| config PAGE_SIZE_64KB |
| bool "64kB" |
| depends on EXPERIMENTAL && CPU_SH4 |
| help |
| This enables support for 64kB pages, possible on all SH-4 |
| CPUs and later. Highly experimental, not recommended. |
| |
| endchoice |
| |
| choice |
| prompt "HugeTLB page size" |
| depends on HUGETLB_PAGE && CPU_SH4 && MMU |
| default HUGETLB_PAGE_SIZE_64K |
| |
| config HUGETLB_PAGE_SIZE_64K |
| bool "64kB" |
| |
| config HUGETLB_PAGE_SIZE_256K |
| bool "256kB" |
| depends on X2TLB |
| |
| config HUGETLB_PAGE_SIZE_1MB |
| bool "1MB" |
| |
| config HUGETLB_PAGE_SIZE_4MB |
| bool "4MB" |
| depends on X2TLB |
| |
| config HUGETLB_PAGE_SIZE_64MB |
| bool "64MB" |
| depends on X2TLB |
| |
| endchoice |
| |
| source "mm/Kconfig" |
| |
| endmenu |
| |
| menu "Cache configuration" |
| |
| config SH7705_CACHE_32KB |
| bool "Enable 32KB cache size for SH7705" |
| depends on CPU_SUBTYPE_SH7705 |
| default y |
| |
| config SH_DIRECT_MAPPED |
| bool "Use direct-mapped caching" |
| default n |
| help |
| Selecting this option will configure the caches to be direct-mapped, |
| even if the cache supports a 2 or 4-way mode. This is useful primarily |
| for debugging on platforms with 2 and 4-way caches (SH7750R/SH7751R, |
| SH4-202, SH4-501, etc.) |
| |
| Turn this option off for platforms that do not have a direct-mapped |
| cache, and you have no need to run the caches in such a configuration. |
| |
| config SH_WRITETHROUGH |
| bool "Use write-through caching" |
| help |
| Selecting this option will configure the caches in write-through |
| mode, as opposed to the default write-back configuration. |
| |
| Since there's sill some aliasing issues on SH-4, this option will |
| unfortunately still require the majority of flushing functions to |
| be implemented to deal with aliasing. |
| |
| If unsure, say N. |
| |
| config SH_OCRAM |
| bool "Operand Cache RAM (OCRAM) support" |
| help |
| Selecting this option will automatically tear down the number of |
| sets in the dcache by half, which in turn exposes a memory range. |
| |
| The addresses for the OC RAM base will vary according to the |
| processor version. Consult vendor documentation for specifics. |
| |
| If unsure, say N. |
| |
| endmenu |