| /* |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| * |
| * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED |
| * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF |
| * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN |
| * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, |
| * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT |
| * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF |
| * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON |
| * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF |
| * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, write to the Free Software Foundation, Inc., |
| * 675 Mass Ave, Cambridge, MA 02139, USA. |
| * |
| * Copyright 2001 MontaVista Software Inc. |
| * Author: MontaVista Software, Inc. |
| * ahennessy@mvista.com |
| * |
| * Copyright (C) 2000-2001 Toshiba Corporation |
| * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org) |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/types.h> |
| #include <linux/ioport.h> |
| #include <linux/delay.h> |
| #include <linux/pm.h> |
| #include <linux/platform_device.h> |
| #include <linux/clk.h> |
| #include <linux/gpio.h> |
| #ifdef CONFIG_SERIAL_TXX9 |
| #include <linux/serial_core.h> |
| #endif |
| |
| #include <asm/txx9tmr.h> |
| #include <asm/txx9pio.h> |
| #include <asm/reboot.h> |
| #include <asm/txx9/pci.h> |
| #include <asm/txx9/jmr3927.h> |
| #include <asm/mipsregs.h> |
| |
| extern void puts(const char *cp); |
| |
| /* don't enable - see errata */ |
| static int jmr3927_ccfg_toeon; |
| |
| static inline void do_reset(void) |
| { |
| #if 1 /* Resetting PCI bus */ |
| jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR); |
| jmr3927_ioc_reg_out(JMR3927_IOC_RESET_PCI, JMR3927_IOC_RESET_ADDR); |
| (void)jmr3927_ioc_reg_in(JMR3927_IOC_RESET_ADDR); /* flush WB */ |
| mdelay(1); |
| jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR); |
| #endif |
| jmr3927_ioc_reg_out(JMR3927_IOC_RESET_CPU, JMR3927_IOC_RESET_ADDR); |
| } |
| |
| static void jmr3927_machine_restart(char *command) |
| { |
| local_irq_disable(); |
| puts("Rebooting..."); |
| do_reset(); |
| } |
| |
| static void jmr3927_machine_halt(void) |
| { |
| puts("JMR-TX3927 halted.\n"); |
| while (1); |
| } |
| |
| static void jmr3927_machine_power_off(void) |
| { |
| puts("JMR-TX3927 halted. Please turn off the power.\n"); |
| while (1); |
| } |
| |
| void __init plat_time_init(void) |
| { |
| txx9_clockevent_init(TX3927_TMR_REG(0), |
| TXX9_IRQ_BASE + JMR3927_IRQ_IRC_TMR(0), |
| JMR3927_IMCLK); |
| txx9_clocksource_init(TX3927_TMR_REG(1), JMR3927_IMCLK); |
| } |
| |
| #define DO_WRITE_THROUGH |
| #define DO_ENABLE_CACHE |
| |
| extern char * __init prom_getcmdline(void); |
| static void jmr3927_board_init(void); |
| |
| void __init plat_mem_setup(void) |
| { |
| char *argptr; |
| |
| set_io_port_base(JMR3927_PORT_BASE + JMR3927_PCIIO); |
| |
| _machine_restart = jmr3927_machine_restart; |
| _machine_halt = jmr3927_machine_halt; |
| pm_power_off = jmr3927_machine_power_off; |
| |
| /* |
| * IO/MEM resources. |
| */ |
| ioport_resource.start = 0; |
| ioport_resource.end = 0xffffffff; |
| iomem_resource.start = 0; |
| iomem_resource.end = 0xffffffff; |
| |
| /* Reboot on panic */ |
| panic_timeout = 180; |
| |
| /* cache setup */ |
| { |
| unsigned int conf; |
| #ifdef DO_ENABLE_CACHE |
| int mips_ic_disable = 0, mips_dc_disable = 0; |
| #else |
| int mips_ic_disable = 1, mips_dc_disable = 1; |
| #endif |
| #ifdef DO_WRITE_THROUGH |
| int mips_config_cwfon = 0; |
| int mips_config_wbon = 0; |
| #else |
| int mips_config_cwfon = 1; |
| int mips_config_wbon = 1; |
| #endif |
| |
| conf = read_c0_conf(); |
| conf &= ~(TX39_CONF_ICE | TX39_CONF_DCE | TX39_CONF_WBON | TX39_CONF_CWFON); |
| conf |= mips_ic_disable ? 0 : TX39_CONF_ICE; |
| conf |= mips_dc_disable ? 0 : TX39_CONF_DCE; |
| conf |= mips_config_wbon ? TX39_CONF_WBON : 0; |
| conf |= mips_config_cwfon ? TX39_CONF_CWFON : 0; |
| |
| write_c0_conf(conf); |
| write_c0_cache(0); |
| } |
| |
| /* initialize board */ |
| jmr3927_board_init(); |
| |
| argptr = prom_getcmdline(); |
| |
| if ((argptr = strstr(argptr, "toeon")) != NULL) |
| jmr3927_ccfg_toeon = 1; |
| argptr = prom_getcmdline(); |
| if ((argptr = strstr(argptr, "ip=")) == NULL) { |
| argptr = prom_getcmdline(); |
| strcat(argptr, " ip=bootp"); |
| } |
| |
| #ifdef CONFIG_SERIAL_TXX9 |
| { |
| extern int early_serial_txx9_setup(struct uart_port *port); |
| int i; |
| struct uart_port req; |
| for(i = 0; i < 2; i++) { |
| memset(&req, 0, sizeof(req)); |
| req.line = i; |
| req.iotype = UPIO_MEM; |
| req.membase = (unsigned char __iomem *)TX3927_SIO_REG(i); |
| req.mapbase = TX3927_SIO_REG(i); |
| req.irq = i == 0 ? |
| JMR3927_IRQ_IRC_SIO0 : JMR3927_IRQ_IRC_SIO1; |
| if (i == 0) |
| req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/; |
| req.uartclk = JMR3927_IMCLK; |
| early_serial_txx9_setup(&req); |
| } |
| } |
| #ifdef CONFIG_SERIAL_TXX9_CONSOLE |
| argptr = prom_getcmdline(); |
| if ((argptr = strstr(argptr, "console=")) == NULL) { |
| argptr = prom_getcmdline(); |
| strcat(argptr, " console=ttyS1,115200"); |
| } |
| #endif |
| #endif |
| } |
| |
| static void tx3927_setup(void); |
| |
| static void __init jmr3927_pci_setup(void) |
| { |
| #ifdef CONFIG_PCI |
| int extarb = !(tx3927_ccfgptr->ccfg & TX3927_CCFG_PCIXARB); |
| struct pci_controller *c; |
| |
| c = txx9_alloc_pci_controller(&txx9_primary_pcic, |
| JMR3927_PCIMEM, JMR3927_PCIMEM_SIZE, |
| JMR3927_PCIIO, JMR3927_PCIIO_SIZE); |
| register_pci_controller(c); |
| if (!extarb) { |
| /* Reset PCI Bus */ |
| jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR); |
| udelay(100); |
| jmr3927_ioc_reg_out(JMR3927_IOC_RESET_PCI, |
| JMR3927_IOC_RESET_ADDR); |
| udelay(100); |
| jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR); |
| } |
| tx3927_pcic_setup(c, JMR3927_SDRAM_SIZE, extarb); |
| #endif /* CONFIG_PCI */ |
| } |
| |
| static void __init jmr3927_board_init(void) |
| { |
| tx3927_setup(); |
| jmr3927_pci_setup(); |
| |
| /* SIO0 DTR on */ |
| jmr3927_ioc_reg_out(0, JMR3927_IOC_DTR_ADDR); |
| |
| jmr3927_led_set(0); |
| |
| printk("JMR-TX3927 (Rev %d) --- IOC(Rev %d) DIPSW:%d,%d,%d,%d\n", |
| jmr3927_ioc_reg_in(JMR3927_IOC_BREV_ADDR) & JMR3927_REV_MASK, |
| jmr3927_ioc_reg_in(JMR3927_IOC_REV_ADDR) & JMR3927_REV_MASK, |
| jmr3927_dipsw1(), jmr3927_dipsw2(), |
| jmr3927_dipsw3(), jmr3927_dipsw4()); |
| } |
| |
| static void __init tx3927_setup(void) |
| { |
| int i; |
| |
| /* SDRAMC are configured by PROM */ |
| |
| /* ROMC */ |
| tx3927_romcptr->cr[1] = JMR3927_ROMCE1 | 0x00030048; |
| tx3927_romcptr->cr[2] = JMR3927_ROMCE2 | 0x000064c8; |
| tx3927_romcptr->cr[3] = JMR3927_ROMCE3 | 0x0003f698; |
| tx3927_romcptr->cr[5] = JMR3927_ROMCE5 | 0x0000f218; |
| |
| /* CCFG */ |
| /* enable Timeout BusError */ |
| if (jmr3927_ccfg_toeon) |
| tx3927_ccfgptr->ccfg |= TX3927_CCFG_TOE; |
| |
| /* clear BusErrorOnWrite flag */ |
| tx3927_ccfgptr->ccfg &= ~TX3927_CCFG_BEOW; |
| /* Disable PCI snoop */ |
| tx3927_ccfgptr->ccfg &= ~TX3927_CCFG_PSNP; |
| /* do reset on watchdog */ |
| tx3927_ccfgptr->ccfg |= TX3927_CCFG_WR; |
| |
| #ifdef DO_WRITE_THROUGH |
| /* Enable PCI SNOOP - with write through only */ |
| tx3927_ccfgptr->ccfg |= TX3927_CCFG_PSNP; |
| #endif |
| |
| /* Pin selection */ |
| tx3927_ccfgptr->pcfg &= ~TX3927_PCFG_SELALL; |
| tx3927_ccfgptr->pcfg |= |
| TX3927_PCFG_SELSIOC(0) | TX3927_PCFG_SELSIO_ALL | |
| (TX3927_PCFG_SELDMA_ALL & ~TX3927_PCFG_SELDMA(1)); |
| |
| printk("TX3927 -- CRIR:%08lx CCFG:%08lx PCFG:%08lx\n", |
| tx3927_ccfgptr->crir, |
| tx3927_ccfgptr->ccfg, tx3927_ccfgptr->pcfg); |
| |
| /* TMR */ |
| for (i = 0; i < TX3927_NR_TMR; i++) |
| txx9_tmr_init(TX3927_TMR_REG(i)); |
| |
| /* DMA */ |
| tx3927_dmaptr->mcr = 0; |
| for (i = 0; i < ARRAY_SIZE(tx3927_dmaptr->ch); i++) { |
| /* reset channel */ |
| tx3927_dmaptr->ch[i].ccr = TX3927_DMA_CCR_CHRST; |
| tx3927_dmaptr->ch[i].ccr = 0; |
| } |
| /* enable DMA */ |
| #ifdef __BIG_ENDIAN |
| tx3927_dmaptr->mcr = TX3927_DMA_MCR_MSTEN; |
| #else |
| tx3927_dmaptr->mcr = TX3927_DMA_MCR_MSTEN | TX3927_DMA_MCR_LE; |
| #endif |
| |
| /* PIO */ |
| /* PIO[15:12] connected to LEDs */ |
| __raw_writel(0x0000f000, &tx3927_pioptr->dir); |
| __raw_writel(0, &tx3927_pioptr->maskcpu); |
| __raw_writel(0, &tx3927_pioptr->maskext); |
| txx9_gpio_init(TX3927_PIO_REG, 0, 16); |
| gpio_request(11, "dipsw1"); |
| gpio_request(10, "dipsw2"); |
| { |
| unsigned int conf; |
| |
| conf = read_c0_conf(); |
| if (!(conf & TX39_CONF_ICE)) |
| printk("TX3927 I-Cache disabled.\n"); |
| if (!(conf & TX39_CONF_DCE)) |
| printk("TX3927 D-Cache disabled.\n"); |
| else if (!(conf & TX39_CONF_WBON)) |
| printk("TX3927 D-Cache WriteThrough.\n"); |
| else if (!(conf & TX39_CONF_CWFON)) |
| printk("TX3927 D-Cache WriteBack.\n"); |
| else |
| printk("TX3927 D-Cache WriteBack (CWF) .\n"); |
| } |
| } |
| |
| /* This trick makes rtc-ds1742 driver usable as is. */ |
| unsigned long __swizzle_addr_b(unsigned long port) |
| { |
| if ((port & 0xffff0000) != JMR3927_IOC_NVRAMB_ADDR) |
| return port; |
| port = (port & 0xffff0000) | (port & 0x7fff << 1); |
| #ifdef __BIG_ENDIAN |
| return port; |
| #else |
| return port | 1; |
| #endif |
| } |
| EXPORT_SYMBOL(__swizzle_addr_b); |
| |
| static int __init jmr3927_rtc_init(void) |
| { |
| static struct resource __initdata res = { |
| .start = JMR3927_IOC_NVRAMB_ADDR - IO_BASE, |
| .end = JMR3927_IOC_NVRAMB_ADDR - IO_BASE + 0x800 - 1, |
| .flags = IORESOURCE_MEM, |
| }; |
| struct platform_device *dev; |
| dev = platform_device_register_simple("rtc-ds1742", -1, &res, 1); |
| return IS_ERR(dev) ? PTR_ERR(dev) : 0; |
| } |
| device_initcall(jmr3927_rtc_init); |
| |
| /* Watchdog support */ |
| |
| static int __init txx9_wdt_init(unsigned long base) |
| { |
| struct resource res = { |
| .start = base, |
| .end = base + 0x100 - 1, |
| .flags = IORESOURCE_MEM, |
| }; |
| struct platform_device *dev = |
| platform_device_register_simple("txx9wdt", -1, &res, 1); |
| return IS_ERR(dev) ? PTR_ERR(dev) : 0; |
| } |
| |
| static int __init jmr3927_wdt_init(void) |
| { |
| return txx9_wdt_init(TX3927_TMR_REG(2)); |
| } |
| device_initcall(jmr3927_wdt_init); |
| |
| /* Minimum CLK support */ |
| |
| struct clk *clk_get(struct device *dev, const char *id) |
| { |
| if (!strcmp(id, "imbus_clk")) |
| return (struct clk *)JMR3927_IMCLK; |
| return ERR_PTR(-ENOENT); |
| } |
| EXPORT_SYMBOL(clk_get); |
| |
| int clk_enable(struct clk *clk) |
| { |
| return 0; |
| } |
| EXPORT_SYMBOL(clk_enable); |
| |
| void clk_disable(struct clk *clk) |
| { |
| } |
| EXPORT_SYMBOL(clk_disable); |
| |
| unsigned long clk_get_rate(struct clk *clk) |
| { |
| return (unsigned long)clk; |
| } |
| EXPORT_SYMBOL(clk_get_rate); |
| |
| void clk_put(struct clk *clk) |
| { |
| } |
| EXPORT_SYMBOL(clk_put); |