| /* |
| * Copyright (C) 2010 Google, Inc. |
| * |
| * Author: |
| * Erik Gilling <konkers@google.com> |
| * Benoit Goby <benoit@android.com> |
| * |
| * This software is licensed under the terms of the GNU General Public |
| * License version 2, as published by the Free Software Foundation, and |
| * may be copied, distributed, and modified under those terms. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| */ |
| |
| #include <linux/resource.h> |
| #include <linux/delay.h> |
| #include <linux/slab.h> |
| #include <linux/err.h> |
| #include <linux/export.h> |
| #include <linux/platform_device.h> |
| #include <linux/io.h> |
| #include <linux/gpio.h> |
| #include <linux/of_gpio.h> |
| #include <linux/usb/otg.h> |
| #include <linux/usb/ulpi.h> |
| #include <asm/mach-types.h> |
| #include <linux/usb/tegra_usb_phy.h> |
| #include <mach/iomap.h> |
| |
| #define ULPI_VIEWPORT 0x170 |
| |
| #define USB_PORTSC1 0x184 |
| #define USB_PORTSC1_PTS(x) (((x) & 0x3) << 30) |
| #define USB_PORTSC1_PSPD(x) (((x) & 0x3) << 26) |
| #define USB_PORTSC1_PHCD (1 << 23) |
| #define USB_PORTSC1_WKOC (1 << 22) |
| #define USB_PORTSC1_WKDS (1 << 21) |
| #define USB_PORTSC1_WKCN (1 << 20) |
| #define USB_PORTSC1_PTC(x) (((x) & 0xf) << 16) |
| #define USB_PORTSC1_PP (1 << 12) |
| #define USB_PORTSC1_SUSP (1 << 7) |
| #define USB_PORTSC1_PE (1 << 2) |
| #define USB_PORTSC1_CCS (1 << 0) |
| |
| #define USB_SUSP_CTRL 0x400 |
| #define USB_WAKE_ON_CNNT_EN_DEV (1 << 3) |
| #define USB_WAKE_ON_DISCON_EN_DEV (1 << 4) |
| #define USB_SUSP_CLR (1 << 5) |
| #define USB_PHY_CLK_VALID (1 << 7) |
| #define UTMIP_RESET (1 << 11) |
| #define UHSIC_RESET (1 << 11) |
| #define UTMIP_PHY_ENABLE (1 << 12) |
| #define ULPI_PHY_ENABLE (1 << 13) |
| #define USB_SUSP_SET (1 << 14) |
| #define USB_WAKEUP_DEBOUNCE_COUNT(x) (((x) & 0x7) << 16) |
| |
| #define USB1_LEGACY_CTRL 0x410 |
| #define USB1_NO_LEGACY_MODE (1 << 0) |
| #define USB1_VBUS_SENSE_CTL_MASK (3 << 1) |
| #define USB1_VBUS_SENSE_CTL_VBUS_WAKEUP (0 << 1) |
| #define USB1_VBUS_SENSE_CTL_AB_SESS_VLD_OR_VBUS_WAKEUP \ |
| (1 << 1) |
| #define USB1_VBUS_SENSE_CTL_AB_SESS_VLD (2 << 1) |
| #define USB1_VBUS_SENSE_CTL_A_SESS_VLD (3 << 1) |
| |
| #define ULPI_TIMING_CTRL_0 0x424 |
| #define ULPI_OUTPUT_PINMUX_BYP (1 << 10) |
| #define ULPI_CLKOUT_PINMUX_BYP (1 << 11) |
| |
| #define ULPI_TIMING_CTRL_1 0x428 |
| #define ULPI_DATA_TRIMMER_LOAD (1 << 0) |
| #define ULPI_DATA_TRIMMER_SEL(x) (((x) & 0x7) << 1) |
| #define ULPI_STPDIRNXT_TRIMMER_LOAD (1 << 16) |
| #define ULPI_STPDIRNXT_TRIMMER_SEL(x) (((x) & 0x7) << 17) |
| #define ULPI_DIR_TRIMMER_LOAD (1 << 24) |
| #define ULPI_DIR_TRIMMER_SEL(x) (((x) & 0x7) << 25) |
| |
| #define UTMIP_PLL_CFG1 0x804 |
| #define UTMIP_XTAL_FREQ_COUNT(x) (((x) & 0xfff) << 0) |
| #define UTMIP_PLLU_ENABLE_DLY_COUNT(x) (((x) & 0x1f) << 27) |
| |
| #define UTMIP_XCVR_CFG0 0x808 |
| #define UTMIP_XCVR_SETUP(x) (((x) & 0xf) << 0) |
| #define UTMIP_XCVR_LSRSLEW(x) (((x) & 0x3) << 8) |
| #define UTMIP_XCVR_LSFSLEW(x) (((x) & 0x3) << 10) |
| #define UTMIP_FORCE_PD_POWERDOWN (1 << 14) |
| #define UTMIP_FORCE_PD2_POWERDOWN (1 << 16) |
| #define UTMIP_FORCE_PDZI_POWERDOWN (1 << 18) |
| #define UTMIP_XCVR_HSSLEW_MSB(x) (((x) & 0x7f) << 25) |
| |
| #define UTMIP_BIAS_CFG0 0x80c |
| #define UTMIP_OTGPD (1 << 11) |
| #define UTMIP_BIASPD (1 << 10) |
| |
| #define UTMIP_HSRX_CFG0 0x810 |
| #define UTMIP_ELASTIC_LIMIT(x) (((x) & 0x1f) << 10) |
| #define UTMIP_IDLE_WAIT(x) (((x) & 0x1f) << 15) |
| |
| #define UTMIP_HSRX_CFG1 0x814 |
| #define UTMIP_HS_SYNC_START_DLY(x) (((x) & 0x1f) << 1) |
| |
| #define UTMIP_TX_CFG0 0x820 |
| #define UTMIP_FS_PREABMLE_J (1 << 19) |
| #define UTMIP_HS_DISCON_DISABLE (1 << 8) |
| |
| #define UTMIP_MISC_CFG0 0x824 |
| #define UTMIP_DPDM_OBSERVE (1 << 26) |
| #define UTMIP_DPDM_OBSERVE_SEL(x) (((x) & 0xf) << 27) |
| #define UTMIP_DPDM_OBSERVE_SEL_FS_J UTMIP_DPDM_OBSERVE_SEL(0xf) |
| #define UTMIP_DPDM_OBSERVE_SEL_FS_K UTMIP_DPDM_OBSERVE_SEL(0xe) |
| #define UTMIP_DPDM_OBSERVE_SEL_FS_SE1 UTMIP_DPDM_OBSERVE_SEL(0xd) |
| #define UTMIP_DPDM_OBSERVE_SEL_FS_SE0 UTMIP_DPDM_OBSERVE_SEL(0xc) |
| #define UTMIP_SUSPEND_EXIT_ON_EDGE (1 << 22) |
| |
| #define UTMIP_MISC_CFG1 0x828 |
| #define UTMIP_PLL_ACTIVE_DLY_COUNT(x) (((x) & 0x1f) << 18) |
| #define UTMIP_PLLU_STABLE_COUNT(x) (((x) & 0xfff) << 6) |
| |
| #define UTMIP_DEBOUNCE_CFG0 0x82c |
| #define UTMIP_BIAS_DEBOUNCE_A(x) (((x) & 0xffff) << 0) |
| |
| #define UTMIP_BAT_CHRG_CFG0 0x830 |
| #define UTMIP_PD_CHRG (1 << 0) |
| |
| #define UTMIP_SPARE_CFG0 0x834 |
| #define FUSE_SETUP_SEL (1 << 3) |
| |
| #define UTMIP_XCVR_CFG1 0x838 |
| #define UTMIP_FORCE_PDDISC_POWERDOWN (1 << 0) |
| #define UTMIP_FORCE_PDCHRP_POWERDOWN (1 << 2) |
| #define UTMIP_FORCE_PDDR_POWERDOWN (1 << 4) |
| #define UTMIP_XCVR_TERM_RANGE_ADJ(x) (((x) & 0xf) << 18) |
| |
| #define UTMIP_BIAS_CFG1 0x83c |
| #define UTMIP_BIAS_PDTRK_COUNT(x) (((x) & 0x1f) << 3) |
| |
| static DEFINE_SPINLOCK(utmip_pad_lock); |
| static int utmip_pad_count; |
| |
| struct tegra_xtal_freq { |
| int freq; |
| u8 enable_delay; |
| u8 stable_count; |
| u8 active_delay; |
| u8 xtal_freq_count; |
| u16 debounce; |
| }; |
| |
| static const struct tegra_xtal_freq tegra_freq_table[] = { |
| { |
| .freq = 12000000, |
| .enable_delay = 0x02, |
| .stable_count = 0x2F, |
| .active_delay = 0x04, |
| .xtal_freq_count = 0x76, |
| .debounce = 0x7530, |
| }, |
| { |
| .freq = 13000000, |
| .enable_delay = 0x02, |
| .stable_count = 0x33, |
| .active_delay = 0x05, |
| .xtal_freq_count = 0x7F, |
| .debounce = 0x7EF4, |
| }, |
| { |
| .freq = 19200000, |
| .enable_delay = 0x03, |
| .stable_count = 0x4B, |
| .active_delay = 0x06, |
| .xtal_freq_count = 0xBB, |
| .debounce = 0xBB80, |
| }, |
| { |
| .freq = 26000000, |
| .enable_delay = 0x04, |
| .stable_count = 0x66, |
| .active_delay = 0x09, |
| .xtal_freq_count = 0xFE, |
| .debounce = 0xFDE8, |
| }, |
| }; |
| |
| static struct tegra_utmip_config utmip_default[] = { |
| [0] = { |
| .hssync_start_delay = 9, |
| .idle_wait_delay = 17, |
| .elastic_limit = 16, |
| .term_range_adj = 6, |
| .xcvr_setup = 9, |
| .xcvr_lsfslew = 1, |
| .xcvr_lsrslew = 1, |
| }, |
| [2] = { |
| .hssync_start_delay = 9, |
| .idle_wait_delay = 17, |
| .elastic_limit = 16, |
| .term_range_adj = 6, |
| .xcvr_setup = 9, |
| .xcvr_lsfslew = 2, |
| .xcvr_lsrslew = 2, |
| }, |
| }; |
| |
| static inline bool phy_is_ulpi(struct tegra_usb_phy *phy) |
| { |
| return (phy->instance == 1); |
| } |
| |
| static int utmip_pad_open(struct tegra_usb_phy *phy) |
| { |
| phy->pad_clk = clk_get_sys("utmip-pad", NULL); |
| if (IS_ERR(phy->pad_clk)) { |
| pr_err("%s: can't get utmip pad clock\n", __func__); |
| return PTR_ERR(phy->pad_clk); |
| } |
| |
| if (phy->instance == 0) { |
| phy->pad_regs = phy->regs; |
| } else { |
| phy->pad_regs = ioremap(TEGRA_USB_BASE, TEGRA_USB_SIZE); |
| if (!phy->pad_regs) { |
| pr_err("%s: can't remap usb registers\n", __func__); |
| clk_put(phy->pad_clk); |
| return -ENOMEM; |
| } |
| } |
| return 0; |
| } |
| |
| static void utmip_pad_close(struct tegra_usb_phy *phy) |
| { |
| if (phy->instance != 0) |
| iounmap(phy->pad_regs); |
| clk_put(phy->pad_clk); |
| } |
| |
| static void utmip_pad_power_on(struct tegra_usb_phy *phy) |
| { |
| unsigned long val, flags; |
| void __iomem *base = phy->pad_regs; |
| |
| clk_prepare_enable(phy->pad_clk); |
| |
| spin_lock_irqsave(&utmip_pad_lock, flags); |
| |
| if (utmip_pad_count++ == 0) { |
| val = readl(base + UTMIP_BIAS_CFG0); |
| val &= ~(UTMIP_OTGPD | UTMIP_BIASPD); |
| writel(val, base + UTMIP_BIAS_CFG0); |
| } |
| |
| spin_unlock_irqrestore(&utmip_pad_lock, flags); |
| |
| clk_disable_unprepare(phy->pad_clk); |
| } |
| |
| static int utmip_pad_power_off(struct tegra_usb_phy *phy) |
| { |
| unsigned long val, flags; |
| void __iomem *base = phy->pad_regs; |
| |
| if (!utmip_pad_count) { |
| pr_err("%s: utmip pad already powered off\n", __func__); |
| return -EINVAL; |
| } |
| |
| clk_prepare_enable(phy->pad_clk); |
| |
| spin_lock_irqsave(&utmip_pad_lock, flags); |
| |
| if (--utmip_pad_count == 0) { |
| val = readl(base + UTMIP_BIAS_CFG0); |
| val |= UTMIP_OTGPD | UTMIP_BIASPD; |
| writel(val, base + UTMIP_BIAS_CFG0); |
| } |
| |
| spin_unlock_irqrestore(&utmip_pad_lock, flags); |
| |
| clk_disable_unprepare(phy->pad_clk); |
| |
| return 0; |
| } |
| |
| static int utmi_wait_register(void __iomem *reg, u32 mask, u32 result) |
| { |
| unsigned long timeout = 2000; |
| do { |
| if ((readl(reg) & mask) == result) |
| return 0; |
| udelay(1); |
| timeout--; |
| } while (timeout); |
| return -1; |
| } |
| |
| static void utmi_phy_clk_disable(struct tegra_usb_phy *phy) |
| { |
| unsigned long val; |
| void __iomem *base = phy->regs; |
| |
| if (phy->instance == 0) { |
| val = readl(base + USB_SUSP_CTRL); |
| val |= USB_SUSP_SET; |
| writel(val, base + USB_SUSP_CTRL); |
| |
| udelay(10); |
| |
| val = readl(base + USB_SUSP_CTRL); |
| val &= ~USB_SUSP_SET; |
| writel(val, base + USB_SUSP_CTRL); |
| } |
| |
| if (phy->instance == 2) { |
| val = readl(base + USB_PORTSC1); |
| val |= USB_PORTSC1_PHCD; |
| writel(val, base + USB_PORTSC1); |
| } |
| |
| if (utmi_wait_register(base + USB_SUSP_CTRL, USB_PHY_CLK_VALID, 0) < 0) |
| pr_err("%s: timeout waiting for phy to stabilize\n", __func__); |
| } |
| |
| static void utmi_phy_clk_enable(struct tegra_usb_phy *phy) |
| { |
| unsigned long val; |
| void __iomem *base = phy->regs; |
| |
| if (phy->instance == 0) { |
| val = readl(base + USB_SUSP_CTRL); |
| val |= USB_SUSP_CLR; |
| writel(val, base + USB_SUSP_CTRL); |
| |
| udelay(10); |
| |
| val = readl(base + USB_SUSP_CTRL); |
| val &= ~USB_SUSP_CLR; |
| writel(val, base + USB_SUSP_CTRL); |
| } |
| |
| if (phy->instance == 2) { |
| val = readl(base + USB_PORTSC1); |
| val &= ~USB_PORTSC1_PHCD; |
| writel(val, base + USB_PORTSC1); |
| } |
| |
| if (utmi_wait_register(base + USB_SUSP_CTRL, USB_PHY_CLK_VALID, |
| USB_PHY_CLK_VALID)) |
| pr_err("%s: timeout waiting for phy to stabilize\n", __func__); |
| } |
| |
| static int utmi_phy_power_on(struct tegra_usb_phy *phy) |
| { |
| unsigned long val; |
| void __iomem *base = phy->regs; |
| struct tegra_utmip_config *config = phy->config; |
| |
| val = readl(base + USB_SUSP_CTRL); |
| val |= UTMIP_RESET; |
| writel(val, base + USB_SUSP_CTRL); |
| |
| if (phy->instance == 0) { |
| val = readl(base + USB1_LEGACY_CTRL); |
| val |= USB1_NO_LEGACY_MODE; |
| writel(val, base + USB1_LEGACY_CTRL); |
| } |
| |
| val = readl(base + UTMIP_TX_CFG0); |
| val &= ~UTMIP_FS_PREABMLE_J; |
| writel(val, base + UTMIP_TX_CFG0); |
| |
| val = readl(base + UTMIP_HSRX_CFG0); |
| val &= ~(UTMIP_IDLE_WAIT(~0) | UTMIP_ELASTIC_LIMIT(~0)); |
| val |= UTMIP_IDLE_WAIT(config->idle_wait_delay); |
| val |= UTMIP_ELASTIC_LIMIT(config->elastic_limit); |
| writel(val, base + UTMIP_HSRX_CFG0); |
| |
| val = readl(base + UTMIP_HSRX_CFG1); |
| val &= ~UTMIP_HS_SYNC_START_DLY(~0); |
| val |= UTMIP_HS_SYNC_START_DLY(config->hssync_start_delay); |
| writel(val, base + UTMIP_HSRX_CFG1); |
| |
| val = readl(base + UTMIP_DEBOUNCE_CFG0); |
| val &= ~UTMIP_BIAS_DEBOUNCE_A(~0); |
| val |= UTMIP_BIAS_DEBOUNCE_A(phy->freq->debounce); |
| writel(val, base + UTMIP_DEBOUNCE_CFG0); |
| |
| val = readl(base + UTMIP_MISC_CFG0); |
| val &= ~UTMIP_SUSPEND_EXIT_ON_EDGE; |
| writel(val, base + UTMIP_MISC_CFG0); |
| |
| val = readl(base + UTMIP_MISC_CFG1); |
| val &= ~(UTMIP_PLL_ACTIVE_DLY_COUNT(~0) | UTMIP_PLLU_STABLE_COUNT(~0)); |
| val |= UTMIP_PLL_ACTIVE_DLY_COUNT(phy->freq->active_delay) | |
| UTMIP_PLLU_STABLE_COUNT(phy->freq->stable_count); |
| writel(val, base + UTMIP_MISC_CFG1); |
| |
| val = readl(base + UTMIP_PLL_CFG1); |
| val &= ~(UTMIP_XTAL_FREQ_COUNT(~0) | UTMIP_PLLU_ENABLE_DLY_COUNT(~0)); |
| val |= UTMIP_XTAL_FREQ_COUNT(phy->freq->xtal_freq_count) | |
| UTMIP_PLLU_ENABLE_DLY_COUNT(phy->freq->enable_delay); |
| writel(val, base + UTMIP_PLL_CFG1); |
| |
| if (phy->mode == TEGRA_USB_PHY_MODE_DEVICE) { |
| val = readl(base + USB_SUSP_CTRL); |
| val &= ~(USB_WAKE_ON_CNNT_EN_DEV | USB_WAKE_ON_DISCON_EN_DEV); |
| writel(val, base + USB_SUSP_CTRL); |
| } |
| |
| utmip_pad_power_on(phy); |
| |
| val = readl(base + UTMIP_XCVR_CFG0); |
| val &= ~(UTMIP_FORCE_PD_POWERDOWN | UTMIP_FORCE_PD2_POWERDOWN | |
| UTMIP_FORCE_PDZI_POWERDOWN | UTMIP_XCVR_SETUP(~0) | |
| UTMIP_XCVR_LSFSLEW(~0) | UTMIP_XCVR_LSRSLEW(~0) | |
| UTMIP_XCVR_HSSLEW_MSB(~0)); |
| val |= UTMIP_XCVR_SETUP(config->xcvr_setup); |
| val |= UTMIP_XCVR_LSFSLEW(config->xcvr_lsfslew); |
| val |= UTMIP_XCVR_LSRSLEW(config->xcvr_lsrslew); |
| writel(val, base + UTMIP_XCVR_CFG0); |
| |
| val = readl(base + UTMIP_XCVR_CFG1); |
| val &= ~(UTMIP_FORCE_PDDISC_POWERDOWN | UTMIP_FORCE_PDCHRP_POWERDOWN | |
| UTMIP_FORCE_PDDR_POWERDOWN | UTMIP_XCVR_TERM_RANGE_ADJ(~0)); |
| val |= UTMIP_XCVR_TERM_RANGE_ADJ(config->term_range_adj); |
| writel(val, base + UTMIP_XCVR_CFG1); |
| |
| val = readl(base + UTMIP_BAT_CHRG_CFG0); |
| val &= ~UTMIP_PD_CHRG; |
| writel(val, base + UTMIP_BAT_CHRG_CFG0); |
| |
| val = readl(base + UTMIP_BIAS_CFG1); |
| val &= ~UTMIP_BIAS_PDTRK_COUNT(~0); |
| val |= UTMIP_BIAS_PDTRK_COUNT(0x5); |
| writel(val, base + UTMIP_BIAS_CFG1); |
| |
| if (phy->instance == 0) { |
| val = readl(base + UTMIP_SPARE_CFG0); |
| if (phy->mode == TEGRA_USB_PHY_MODE_DEVICE) |
| val &= ~FUSE_SETUP_SEL; |
| else |
| val |= FUSE_SETUP_SEL; |
| writel(val, base + UTMIP_SPARE_CFG0); |
| } |
| |
| if (phy->instance == 2) { |
| val = readl(base + USB_SUSP_CTRL); |
| val |= UTMIP_PHY_ENABLE; |
| writel(val, base + USB_SUSP_CTRL); |
| } |
| |
| val = readl(base + USB_SUSP_CTRL); |
| val &= ~UTMIP_RESET; |
| writel(val, base + USB_SUSP_CTRL); |
| |
| if (phy->instance == 0) { |
| val = readl(base + USB1_LEGACY_CTRL); |
| val &= ~USB1_VBUS_SENSE_CTL_MASK; |
| val |= USB1_VBUS_SENSE_CTL_A_SESS_VLD; |
| writel(val, base + USB1_LEGACY_CTRL); |
| |
| val = readl(base + USB_SUSP_CTRL); |
| val &= ~USB_SUSP_SET; |
| writel(val, base + USB_SUSP_CTRL); |
| } |
| |
| utmi_phy_clk_enable(phy); |
| |
| if (phy->instance == 2) { |
| val = readl(base + USB_PORTSC1); |
| val &= ~USB_PORTSC1_PTS(~0); |
| writel(val, base + USB_PORTSC1); |
| } |
| |
| return 0; |
| } |
| |
| static int utmi_phy_power_off(struct tegra_usb_phy *phy) |
| { |
| unsigned long val; |
| void __iomem *base = phy->regs; |
| |
| utmi_phy_clk_disable(phy); |
| |
| if (phy->mode == TEGRA_USB_PHY_MODE_DEVICE) { |
| val = readl(base + USB_SUSP_CTRL); |
| val &= ~USB_WAKEUP_DEBOUNCE_COUNT(~0); |
| val |= USB_WAKE_ON_CNNT_EN_DEV | USB_WAKEUP_DEBOUNCE_COUNT(5); |
| writel(val, base + USB_SUSP_CTRL); |
| } |
| |
| val = readl(base + USB_SUSP_CTRL); |
| val |= UTMIP_RESET; |
| writel(val, base + USB_SUSP_CTRL); |
| |
| val = readl(base + UTMIP_BAT_CHRG_CFG0); |
| val |= UTMIP_PD_CHRG; |
| writel(val, base + UTMIP_BAT_CHRG_CFG0); |
| |
| val = readl(base + UTMIP_XCVR_CFG0); |
| val |= UTMIP_FORCE_PD_POWERDOWN | UTMIP_FORCE_PD2_POWERDOWN | |
| UTMIP_FORCE_PDZI_POWERDOWN; |
| writel(val, base + UTMIP_XCVR_CFG0); |
| |
| val = readl(base + UTMIP_XCVR_CFG1); |
| val |= UTMIP_FORCE_PDDISC_POWERDOWN | UTMIP_FORCE_PDCHRP_POWERDOWN | |
| UTMIP_FORCE_PDDR_POWERDOWN; |
| writel(val, base + UTMIP_XCVR_CFG1); |
| |
| return utmip_pad_power_off(phy); |
| } |
| |
| static void utmi_phy_preresume(struct tegra_usb_phy *phy) |
| { |
| unsigned long val; |
| void __iomem *base = phy->regs; |
| |
| val = readl(base + UTMIP_TX_CFG0); |
| val |= UTMIP_HS_DISCON_DISABLE; |
| writel(val, base + UTMIP_TX_CFG0); |
| } |
| |
| static void utmi_phy_postresume(struct tegra_usb_phy *phy) |
| { |
| unsigned long val; |
| void __iomem *base = phy->regs; |
| |
| val = readl(base + UTMIP_TX_CFG0); |
| val &= ~UTMIP_HS_DISCON_DISABLE; |
| writel(val, base + UTMIP_TX_CFG0); |
| } |
| |
| static void utmi_phy_restore_start(struct tegra_usb_phy *phy, |
| enum tegra_usb_phy_port_speed port_speed) |
| { |
| unsigned long val; |
| void __iomem *base = phy->regs; |
| |
| val = readl(base + UTMIP_MISC_CFG0); |
| val &= ~UTMIP_DPDM_OBSERVE_SEL(~0); |
| if (port_speed == TEGRA_USB_PHY_PORT_SPEED_LOW) |
| val |= UTMIP_DPDM_OBSERVE_SEL_FS_K; |
| else |
| val |= UTMIP_DPDM_OBSERVE_SEL_FS_J; |
| writel(val, base + UTMIP_MISC_CFG0); |
| udelay(1); |
| |
| val = readl(base + UTMIP_MISC_CFG0); |
| val |= UTMIP_DPDM_OBSERVE; |
| writel(val, base + UTMIP_MISC_CFG0); |
| udelay(10); |
| } |
| |
| static void utmi_phy_restore_end(struct tegra_usb_phy *phy) |
| { |
| unsigned long val; |
| void __iomem *base = phy->regs; |
| |
| val = readl(base + UTMIP_MISC_CFG0); |
| val &= ~UTMIP_DPDM_OBSERVE; |
| writel(val, base + UTMIP_MISC_CFG0); |
| udelay(10); |
| } |
| |
| static int ulpi_phy_power_on(struct tegra_usb_phy *phy) |
| { |
| int ret; |
| unsigned long val; |
| void __iomem *base = phy->regs; |
| struct tegra_ulpi_config *config = phy->config; |
| |
| gpio_direction_output(config->reset_gpio, 0); |
| msleep(5); |
| gpio_direction_output(config->reset_gpio, 1); |
| |
| clk_prepare_enable(phy->clk); |
| msleep(1); |
| |
| val = readl(base + USB_SUSP_CTRL); |
| val |= UHSIC_RESET; |
| writel(val, base + USB_SUSP_CTRL); |
| |
| val = readl(base + ULPI_TIMING_CTRL_0); |
| val |= ULPI_OUTPUT_PINMUX_BYP | ULPI_CLKOUT_PINMUX_BYP; |
| writel(val, base + ULPI_TIMING_CTRL_0); |
| |
| val = readl(base + USB_SUSP_CTRL); |
| val |= ULPI_PHY_ENABLE; |
| writel(val, base + USB_SUSP_CTRL); |
| |
| val = 0; |
| writel(val, base + ULPI_TIMING_CTRL_1); |
| |
| val |= ULPI_DATA_TRIMMER_SEL(4); |
| val |= ULPI_STPDIRNXT_TRIMMER_SEL(4); |
| val |= ULPI_DIR_TRIMMER_SEL(4); |
| writel(val, base + ULPI_TIMING_CTRL_1); |
| udelay(10); |
| |
| val |= ULPI_DATA_TRIMMER_LOAD; |
| val |= ULPI_STPDIRNXT_TRIMMER_LOAD; |
| val |= ULPI_DIR_TRIMMER_LOAD; |
| writel(val, base + ULPI_TIMING_CTRL_1); |
| |
| /* Fix VbusInvalid due to floating VBUS */ |
| ret = usb_phy_io_write(phy->ulpi, 0x40, 0x08); |
| if (ret) { |
| pr_err("%s: ulpi write failed\n", __func__); |
| return ret; |
| } |
| |
| ret = usb_phy_io_write(phy->ulpi, 0x80, 0x0B); |
| if (ret) { |
| pr_err("%s: ulpi write failed\n", __func__); |
| return ret; |
| } |
| |
| val = readl(base + USB_PORTSC1); |
| val |= USB_PORTSC1_WKOC | USB_PORTSC1_WKDS | USB_PORTSC1_WKCN; |
| writel(val, base + USB_PORTSC1); |
| |
| val = readl(base + USB_SUSP_CTRL); |
| val |= USB_SUSP_CLR; |
| writel(val, base + USB_SUSP_CTRL); |
| udelay(100); |
| |
| val = readl(base + USB_SUSP_CTRL); |
| val &= ~USB_SUSP_CLR; |
| writel(val, base + USB_SUSP_CTRL); |
| |
| return 0; |
| } |
| |
| static int ulpi_phy_power_off(struct tegra_usb_phy *phy) |
| { |
| unsigned long val; |
| void __iomem *base = phy->regs; |
| struct tegra_ulpi_config *config = phy->config; |
| |
| /* Clear WKCN/WKDS/WKOC wake-on events that can cause the USB |
| * Controller to immediately bring the ULPI PHY out of low power |
| */ |
| val = readl(base + USB_PORTSC1); |
| val &= ~(USB_PORTSC1_WKOC | USB_PORTSC1_WKDS | USB_PORTSC1_WKCN); |
| writel(val, base + USB_PORTSC1); |
| |
| clk_disable(phy->clk); |
| return gpio_direction_output(config->reset_gpio, 0); |
| } |
| |
| static int tegra_phy_init(struct usb_phy *x) |
| { |
| struct tegra_usb_phy *phy = container_of(x, struct tegra_usb_phy, u_phy); |
| struct tegra_ulpi_config *ulpi_config; |
| int err; |
| |
| if (phy_is_ulpi(phy)) { |
| ulpi_config = phy->config; |
| phy->clk = clk_get_sys(NULL, ulpi_config->clk); |
| if (IS_ERR(phy->clk)) { |
| pr_err("%s: can't get ulpi clock\n", __func__); |
| err = -ENXIO; |
| goto err1; |
| } |
| if (!gpio_is_valid(ulpi_config->reset_gpio)) |
| ulpi_config->reset_gpio = |
| of_get_named_gpio(phy->dev->of_node, |
| "nvidia,phy-reset-gpio", 0); |
| if (!gpio_is_valid(ulpi_config->reset_gpio)) { |
| pr_err("%s: invalid reset gpio: %d\n", __func__, |
| ulpi_config->reset_gpio); |
| err = -EINVAL; |
| goto err1; |
| } |
| gpio_request(ulpi_config->reset_gpio, "ulpi_phy_reset_b"); |
| gpio_direction_output(ulpi_config->reset_gpio, 0); |
| phy->ulpi = otg_ulpi_create(&ulpi_viewport_access_ops, 0); |
| phy->ulpi->io_priv = phy->regs + ULPI_VIEWPORT; |
| } else { |
| err = utmip_pad_open(phy); |
| if (err < 0) |
| goto err1; |
| } |
| return 0; |
| err1: |
| clk_disable_unprepare(phy->pll_u); |
| clk_put(phy->pll_u); |
| return err; |
| } |
| |
| static void tegra_usb_phy_close(struct usb_phy *x) |
| { |
| struct tegra_usb_phy *phy = container_of(x, struct tegra_usb_phy, u_phy); |
| |
| if (phy_is_ulpi(phy)) |
| clk_put(phy->clk); |
| else |
| utmip_pad_close(phy); |
| clk_disable_unprepare(phy->pll_u); |
| clk_put(phy->pll_u); |
| kfree(phy); |
| } |
| |
| static int tegra_usb_phy_power_on(struct tegra_usb_phy *phy) |
| { |
| if (phy_is_ulpi(phy)) |
| return ulpi_phy_power_on(phy); |
| else |
| return utmi_phy_power_on(phy); |
| } |
| |
| static int tegra_usb_phy_power_off(struct tegra_usb_phy *phy) |
| { |
| if (phy_is_ulpi(phy)) |
| return ulpi_phy_power_off(phy); |
| else |
| return utmi_phy_power_off(phy); |
| } |
| |
| static int tegra_usb_phy_suspend(struct usb_phy *x, int suspend) |
| { |
| struct tegra_usb_phy *phy = container_of(x, struct tegra_usb_phy, u_phy); |
| if (suspend) |
| return tegra_usb_phy_power_off(phy); |
| else |
| return tegra_usb_phy_power_on(phy); |
| } |
| |
| struct tegra_usb_phy *tegra_usb_phy_open(struct device *dev, int instance, |
| void __iomem *regs, void *config, enum tegra_usb_phy_mode phy_mode) |
| { |
| struct tegra_usb_phy *phy; |
| unsigned long parent_rate; |
| int i; |
| int err; |
| |
| phy = kmalloc(sizeof(struct tegra_usb_phy), GFP_KERNEL); |
| if (!phy) |
| return ERR_PTR(-ENOMEM); |
| |
| phy->instance = instance; |
| phy->regs = regs; |
| phy->config = config; |
| phy->mode = phy_mode; |
| phy->dev = dev; |
| |
| if (!phy->config) { |
| if (phy_is_ulpi(phy)) { |
| pr_err("%s: ulpi phy configuration missing", __func__); |
| err = -EINVAL; |
| goto err0; |
| } else { |
| phy->config = &utmip_default[instance]; |
| } |
| } |
| |
| phy->pll_u = clk_get_sys(NULL, "pll_u"); |
| if (IS_ERR(phy->pll_u)) { |
| pr_err("Can't get pll_u clock\n"); |
| err = PTR_ERR(phy->pll_u); |
| goto err0; |
| } |
| clk_prepare_enable(phy->pll_u); |
| |
| parent_rate = clk_get_rate(clk_get_parent(phy->pll_u)); |
| for (i = 0; i < ARRAY_SIZE(tegra_freq_table); i++) { |
| if (tegra_freq_table[i].freq == parent_rate) { |
| phy->freq = &tegra_freq_table[i]; |
| break; |
| } |
| } |
| if (!phy->freq) { |
| pr_err("invalid pll_u parent rate %ld\n", parent_rate); |
| err = -EINVAL; |
| goto err1; |
| } |
| |
| phy->u_phy.init = tegra_phy_init; |
| phy->u_phy.shutdown = tegra_usb_phy_close; |
| phy->u_phy.set_suspend = tegra_usb_phy_suspend; |
| |
| return phy; |
| |
| err1: |
| clk_disable_unprepare(phy->pll_u); |
| clk_put(phy->pll_u); |
| err0: |
| kfree(phy); |
| return ERR_PTR(err); |
| } |
| EXPORT_SYMBOL_GPL(tegra_usb_phy_open); |
| |
| void tegra_usb_phy_preresume(struct tegra_usb_phy *phy) |
| { |
| if (!phy_is_ulpi(phy)) |
| utmi_phy_preresume(phy); |
| } |
| EXPORT_SYMBOL_GPL(tegra_usb_phy_preresume); |
| |
| void tegra_usb_phy_postresume(struct tegra_usb_phy *phy) |
| { |
| if (!phy_is_ulpi(phy)) |
| utmi_phy_postresume(phy); |
| } |
| EXPORT_SYMBOL_GPL(tegra_usb_phy_postresume); |
| |
| void tegra_ehci_phy_restore_start(struct tegra_usb_phy *phy, |
| enum tegra_usb_phy_port_speed port_speed) |
| { |
| if (!phy_is_ulpi(phy)) |
| utmi_phy_restore_start(phy, port_speed); |
| } |
| EXPORT_SYMBOL_GPL(tegra_ehci_phy_restore_start); |
| |
| void tegra_ehci_phy_restore_end(struct tegra_usb_phy *phy) |
| { |
| if (!phy_is_ulpi(phy)) |
| utmi_phy_restore_end(phy); |
| } |
| EXPORT_SYMBOL_GPL(tegra_ehci_phy_restore_end); |
| |
| void tegra_usb_phy_clk_disable(struct tegra_usb_phy *phy) |
| { |
| if (!phy_is_ulpi(phy)) |
| utmi_phy_clk_disable(phy); |
| } |
| EXPORT_SYMBOL_GPL(tegra_usb_phy_clk_disable); |
| |
| void tegra_usb_phy_clk_enable(struct tegra_usb_phy *phy) |
| { |
| if (!phy_is_ulpi(phy)) |
| utmi_phy_clk_enable(phy); |
| } |
| EXPORT_SYMBOL_GPL(tegra_usb_phy_clk_enable); |