| /* |
| * AD7303 Digital to analog converters driver |
| * |
| * Copyright 2013 Analog Devices Inc. |
| * |
| * Licensed under the GPL-2. |
| */ |
| |
| #include <linux/err.h> |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/spi/spi.h> |
| #include <linux/slab.h> |
| #include <linux/sysfs.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/of.h> |
| |
| #include <linux/iio/iio.h> |
| #include <linux/iio/sysfs.h> |
| |
| #include <linux/platform_data/ad7303.h> |
| |
| #define AD7303_CFG_EXTERNAL_VREF BIT(15) |
| #define AD7303_CFG_POWER_DOWN(ch) BIT(11 + (ch)) |
| #define AD7303_CFG_ADDR_OFFSET 10 |
| |
| #define AD7303_CMD_UPDATE_DAC (0x3 << 8) |
| |
| /** |
| * struct ad7303_state - driver instance specific data |
| * @spi: the device for this driver instance |
| * @config: cached config register value |
| * @dac_cache: current DAC raw value (chip does not support readback) |
| * @data: spi transfer buffer |
| */ |
| |
| struct ad7303_state { |
| struct spi_device *spi; |
| uint16_t config; |
| uint8_t dac_cache[2]; |
| |
| struct regulator *vdd_reg; |
| struct regulator *vref_reg; |
| |
| /* |
| * DMA (thus cache coherency maintenance) requires the |
| * transfer buffers to live in their own cache lines. |
| */ |
| __be16 data ____cacheline_aligned; |
| }; |
| |
| static int ad7303_write(struct ad7303_state *st, unsigned int chan, |
| uint8_t val) |
| { |
| st->data = cpu_to_be16(AD7303_CMD_UPDATE_DAC | |
| (chan << AD7303_CFG_ADDR_OFFSET) | |
| st->config | val); |
| |
| return spi_write(st->spi, &st->data, sizeof(st->data)); |
| } |
| |
| static ssize_t ad7303_read_dac_powerdown(struct iio_dev *indio_dev, |
| uintptr_t private, const struct iio_chan_spec *chan, char *buf) |
| { |
| struct ad7303_state *st = iio_priv(indio_dev); |
| |
| return sprintf(buf, "%d\n", (bool)(st->config & |
| AD7303_CFG_POWER_DOWN(chan->channel))); |
| } |
| |
| static ssize_t ad7303_write_dac_powerdown(struct iio_dev *indio_dev, |
| uintptr_t private, const struct iio_chan_spec *chan, const char *buf, |
| size_t len) |
| { |
| struct ad7303_state *st = iio_priv(indio_dev); |
| bool pwr_down; |
| int ret; |
| |
| ret = strtobool(buf, &pwr_down); |
| if (ret) |
| return ret; |
| |
| mutex_lock(&indio_dev->mlock); |
| |
| if (pwr_down) |
| st->config |= AD7303_CFG_POWER_DOWN(chan->channel); |
| else |
| st->config &= ~AD7303_CFG_POWER_DOWN(chan->channel); |
| |
| /* There is no noop cmd which allows us to only update the powerdown |
| * mode, so just write one of the DAC channels again */ |
| ad7303_write(st, chan->channel, st->dac_cache[chan->channel]); |
| |
| mutex_unlock(&indio_dev->mlock); |
| return ret ? ret : len; |
| } |
| |
| static int ad7303_get_vref(struct ad7303_state *st, |
| struct iio_chan_spec const *chan) |
| { |
| int ret; |
| |
| if (st->config & AD7303_CFG_EXTERNAL_VREF) |
| return regulator_get_voltage(st->vref_reg); |
| |
| ret = regulator_get_voltage(st->vdd_reg); |
| if (ret < 0) |
| return ret; |
| return ret / 2; |
| } |
| |
| static int ad7303_read_raw(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, int *val, int *val2, long info) |
| { |
| struct ad7303_state *st = iio_priv(indio_dev); |
| int vref_uv; |
| |
| switch (info) { |
| case IIO_CHAN_INFO_RAW: |
| *val = st->dac_cache[chan->channel]; |
| return IIO_VAL_INT; |
| case IIO_CHAN_INFO_SCALE: |
| vref_uv = ad7303_get_vref(st, chan); |
| if (vref_uv < 0) |
| return vref_uv; |
| |
| *val = 2 * vref_uv / 1000; |
| *val2 = chan->scan_type.realbits; |
| |
| return IIO_VAL_FRACTIONAL_LOG2; |
| default: |
| break; |
| } |
| return -EINVAL; |
| } |
| |
| static int ad7303_write_raw(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, int val, int val2, long mask) |
| { |
| struct ad7303_state *st = iio_priv(indio_dev); |
| int ret; |
| |
| switch (mask) { |
| case IIO_CHAN_INFO_RAW: |
| if (val >= (1 << chan->scan_type.realbits) || val < 0) |
| return -EINVAL; |
| |
| mutex_lock(&indio_dev->mlock); |
| ret = ad7303_write(st, chan->address, val); |
| if (ret == 0) |
| st->dac_cache[chan->channel] = val; |
| mutex_unlock(&indio_dev->mlock); |
| break; |
| default: |
| ret = -EINVAL; |
| } |
| |
| return ret; |
| } |
| |
| static const struct iio_info ad7303_info = { |
| .read_raw = ad7303_read_raw, |
| .write_raw = ad7303_write_raw, |
| .driver_module = THIS_MODULE, |
| }; |
| |
| static const struct iio_chan_spec_ext_info ad7303_ext_info[] = { |
| { |
| .name = "powerdown", |
| .read = ad7303_read_dac_powerdown, |
| .write = ad7303_write_dac_powerdown, |
| }, |
| { }, |
| }; |
| |
| #define AD7303_CHANNEL(chan) { \ |
| .type = IIO_VOLTAGE, \ |
| .indexed = 1, \ |
| .output = 1, \ |
| .channel = (chan), \ |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ |
| .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ |
| .address = (chan), \ |
| .scan_type = { \ |
| .sign = 'u', \ |
| .realbits = '8', \ |
| .storagebits = '8', \ |
| .shift = '0', \ |
| }, \ |
| .ext_info = ad7303_ext_info, \ |
| } |
| |
| static const struct iio_chan_spec ad7303_channels[] = { |
| AD7303_CHANNEL(0), |
| AD7303_CHANNEL(1), |
| }; |
| |
| static int ad7303_probe(struct spi_device *spi) |
| { |
| const struct spi_device_id *id = spi_get_device_id(spi); |
| struct iio_dev *indio_dev; |
| struct ad7303_state *st; |
| bool ext_ref; |
| int ret; |
| |
| indio_dev = iio_device_alloc(sizeof(*st)); |
| if (indio_dev == NULL) |
| return -ENOMEM; |
| |
| st = iio_priv(indio_dev); |
| spi_set_drvdata(spi, indio_dev); |
| |
| st->spi = spi; |
| |
| st->vdd_reg = regulator_get(&spi->dev, "Vdd"); |
| if (IS_ERR(st->vdd_reg)) { |
| ret = PTR_ERR(st->vdd_reg); |
| goto err_free; |
| } |
| |
| ret = regulator_enable(st->vdd_reg); |
| if (ret) |
| goto err_put_vdd_reg; |
| |
| if (spi->dev.of_node) { |
| ext_ref = of_property_read_bool(spi->dev.of_node, |
| "REF-supply"); |
| } else { |
| struct ad7303_platform_data *pdata = spi->dev.platform_data; |
| if (pdata && pdata->use_external_ref) |
| ext_ref = true; |
| else |
| ext_ref = false; |
| } |
| |
| if (ext_ref) { |
| st->vref_reg = regulator_get(&spi->dev, "REF"); |
| if (IS_ERR(st->vref_reg)) |
| goto err_disable_vdd_reg; |
| |
| ret = regulator_enable(st->vref_reg); |
| if (ret) |
| goto err_put_vref_reg; |
| |
| st->config |= AD7303_CFG_EXTERNAL_VREF; |
| } |
| |
| indio_dev->dev.parent = &spi->dev; |
| indio_dev->name = id->name; |
| indio_dev->info = &ad7303_info; |
| indio_dev->modes = INDIO_DIRECT_MODE; |
| indio_dev->channels = ad7303_channels; |
| indio_dev->num_channels = ARRAY_SIZE(ad7303_channels); |
| |
| ret = iio_device_register(indio_dev); |
| if (ret) |
| goto err_disable_vref_reg; |
| |
| return 0; |
| |
| err_disable_vref_reg: |
| if (st->vref_reg) |
| regulator_disable(st->vref_reg); |
| err_put_vref_reg: |
| if (st->vref_reg) |
| regulator_put(st->vref_reg); |
| err_disable_vdd_reg: |
| regulator_disable(st->vdd_reg); |
| err_put_vdd_reg: |
| regulator_put(st->vdd_reg); |
| err_free: |
| iio_device_free(indio_dev); |
| |
| return ret; |
| } |
| |
| static int ad7303_remove(struct spi_device *spi) |
| { |
| struct iio_dev *indio_dev = spi_get_drvdata(spi); |
| struct ad7303_state *st = iio_priv(indio_dev); |
| |
| iio_device_unregister(indio_dev); |
| |
| if (st->vref_reg) { |
| regulator_disable(st->vref_reg); |
| regulator_put(st->vref_reg); |
| } |
| regulator_disable(st->vdd_reg); |
| regulator_put(st->vdd_reg); |
| |
| iio_device_free(indio_dev); |
| |
| return 0; |
| } |
| |
| static const struct spi_device_id ad7303_spi_ids[] = { |
| { "ad7303", 0 }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(spi, ad7303_spi_ids); |
| |
| static struct spi_driver ad7303_driver = { |
| .driver = { |
| .name = "ad7303", |
| .owner = THIS_MODULE, |
| }, |
| .probe = ad7303_probe, |
| .remove = ad7303_remove, |
| .id_table = ad7303_spi_ids, |
| }; |
| module_spi_driver(ad7303_driver); |
| |
| MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>"); |
| MODULE_DESCRIPTION("Analog Devices AD7303 DAC driver"); |
| MODULE_LICENSE("GPL v2"); |