arch/powerpc/platforms/powernv/eeh-powernv.c - LeafOS-Devices/android_kernel_samsung_gta4xl - Gitiles

 /*
  * The file intends to implement the platform dependent EEH operations on
  * powernv platform. Actually, the powernv was created in order to fully
  * hypervisor support.
  *
  * Copyright Benjamin Herrenschmidt & Gavin Shan, IBM Corporation 2013.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
  */

 #include <linux/atomic.h>
 #include <linux/delay.h>
 #include <linux/export.h>
 #include <linux/init.h>
 #include <linux/list.h>
 #include <linux/msi.h>
 #include <linux/of.h>
 #include <linux/pci.h>
 #include <linux/proc_fs.h>
 #include <linux/rbtree.h>
 #include <linux/sched.h>
 #include <linux/seq_file.h>
 #include <linux/spinlock.h>

 #include <asm/eeh.h>
 #include <asm/eeh_event.h>
 #include <asm/firmware.h>
 #include <asm/io.h>
 #include <asm/iommu.h>
 #include <asm/machdep.h>
 #include <asm/msi_bitmap.h>
 #include <asm/opal.h>
 #include <asm/ppc-pci.h>

 #include "powernv.h"
 #include "pci.h"

 /**
  * powernv_eeh_init - EEH platform dependent initialization
  *
  * EEH platform dependent initialization on powernv
  */
 static int powernv_eeh_init(void)
 {
 	/* We require OPALv3 */
 	if (!firmware_has_feature(FW_FEATURE_OPALv3)) {
 		pr_warning("%s: OPALv3 is required !\n", __func__);
 		return -EINVAL;
 	}

 	/* Set EEH probe mode */
 	eeh_probe_mode_set(EEH_PROBE_MODE_DEV);

 	return 0;
 }

 /**
  * powernv_eeh_post_init - EEH platform dependent post initialization
  *
  * EEH platform dependent post initialization on powernv. When
  * the function is called, the EEH PEs and devices should have
  * been built. If the I/O cache staff has been built, EEH is
  * ready to supply service.
  */
 static int powernv_eeh_post_init(void)
 {
 	struct pci_controller *hose;
 	struct pnv_phb *phb;
 	int ret = 0;

 	list_for_each_entry(hose, &hose_list, list_node) {
 		phb = hose->private_data;

 		if (phb->eeh_ops && phb->eeh_ops->post_init) {
 			ret = phb->eeh_ops->post_init(hose);
 			if (ret)
 				break;
 		}
 	}

 	return ret;
 }

 /**
  * powernv_eeh_dev_probe - Do probe on PCI device
  * @dev: PCI device
  * @flag: unused
  *
  * When EEH module is installed during system boot, all PCI devices
  * are checked one by one to see if it supports EEH. The function
  * is introduced for the purpose. By default, EEH has been enabled
  * on all PCI devices. That's to say, we only need do necessary
  * initialization on the corresponding eeh device and create PE
  * accordingly.
  *
  * It's notable that's unsafe to retrieve the EEH device through
  * the corresponding PCI device. During the PCI device hotplug, which
  * was possiblly triggered by EEH core, the binding between EEH device
  * and the PCI device isn't built yet.
  */
 static int powernv_eeh_dev_probe(struct pci_dev *dev, void *flag)
 {
 	struct pci_controller *hose = pci_bus_to_host(dev->bus);
 	struct pnv_phb *phb = hose->private_data;
 	struct device_node *dn = pci_device_to_OF_node(dev);
 	struct eeh_dev *edev = of_node_to_eeh_dev(dn);

 	/*
 	 * When probing the root bridge, which doesn't have any
 	 * subordinate PCI devices. We don't have OF node for
 	 * the root bridge. So it's not reasonable to continue
 	 * the probing.
 	 */
 	if (!dn || !edev)
 		return 0;

 	/* Skip for PCI-ISA bridge */
 	if ((dev->class >> 8) == PCI_CLASS_BRIDGE_ISA)
 		return 0;

 	/* Initialize eeh device */
 	edev->class_code	= dev->class;
 	edev->mode		= 0;
 	edev->config_addr	= ((dev->bus->number << 8) | dev->devfn);
 	edev->pe_config_addr	= phb->bdfn_to_pe(phb, dev->bus, dev->devfn & 0xff);

 	/* Create PE */
 	eeh_add_to_parent_pe(edev);

 	/*
 	 * Enable EEH explicitly so that we will do EEH check
 	 * while accessing I/O stuff
 	 *
 	 * FIXME: Enable that for PHB3 later
 	 */
 	if (phb->type == PNV_PHB_IODA1)
 		eeh_subsystem_enabled = 1;

 	/* Save memory bars */
 	eeh_save_bars(edev);

 	return 0;
 }

 /**
  * powernv_eeh_set_option - Initialize EEH or MMIO/DMA reenable
  * @pe: EEH PE
  * @option: operation to be issued
  *
  * The function is used to control the EEH functionality globally.
  * Currently, following options are support according to PAPR:
  * Enable EEH, Disable EEH, Enable MMIO and Enable DMA
  */
 static int powernv_eeh_set_option(struct eeh_pe *pe, int option)
 {
 	struct pci_controller *hose = pe->phb;
 	struct pnv_phb *phb = hose->private_data;
 	int ret = -EEXIST;

 	/*
 	 * What we need do is pass it down for hardware
 	 * implementation to handle it.
 	 */
 	if (phb->eeh_ops && phb->eeh_ops->set_option)
 		ret = phb->eeh_ops->set_option(pe, option);

 	return ret;
 }

 /**
  * powernv_eeh_get_pe_addr - Retrieve PE address
  * @pe: EEH PE
  *
  * Retrieve the PE address according to the given tranditional
  * PCI BDF (Bus/Device/Function) address.
  */
 static int powernv_eeh_get_pe_addr(struct eeh_pe *pe)
 {
 	return pe->addr;
 }

 /**
  * powernv_eeh_get_state - Retrieve PE state
  * @pe: EEH PE
  * @delay: delay while PE state is temporarily unavailable
  *
  * Retrieve the state of the specified PE. For IODA-compitable
  * platform, it should be retrieved from IODA table. Therefore,
  * we prefer passing down to hardware implementation to handle
  * it.
  */
 static int powernv_eeh_get_state(struct eeh_pe *pe, int *delay)
 {
 	struct pci_controller *hose = pe->phb;
 	struct pnv_phb *phb = hose->private_data;
 	int ret = EEH_STATE_NOT_SUPPORT;

 	if (phb->eeh_ops && phb->eeh_ops->get_state) {
 		ret = phb->eeh_ops->get_state(pe);

 		/*
 		 * If the PE state is temporarily unavailable,
 		 * to inform the EEH core delay for default
 		 * period (1 second)
 		 */
 		if (delay) {
 			*delay = 0;
 			if (ret & EEH_STATE_UNAVAILABLE)
 				*delay = 1000;
 		}
 	}

 	return ret;
 }

 /**
  * powernv_eeh_reset - Reset the specified PE
  * @pe: EEH PE
  * @option: reset option
  *
  * Reset the specified PE
  */
 static int powernv_eeh_reset(struct eeh_pe *pe, int option)
 {
 	struct pci_controller *hose = pe->phb;
 	struct pnv_phb *phb = hose->private_data;
 	int ret = -EEXIST;

 	if (phb->eeh_ops && phb->eeh_ops->reset)
 		ret = phb->eeh_ops->reset(pe, option);

 	return ret;
 }

 /**
  * powernv_eeh_wait_state - Wait for PE state
  * @pe: EEH PE
  * @max_wait: maximal period in microsecond
  *
  * Wait for the state of associated PE. It might take some time
  * to retrieve the PE's state.
  */
 static int powernv_eeh_wait_state(struct eeh_pe *pe, int max_wait)
 {
 	int ret;
 	int mwait;

 	while (1) {
 		ret = powernv_eeh_get_state(pe, &mwait);

 		/*
 		 * If the PE's state is temporarily unavailable,
 		 * we have to wait for the specified time. Otherwise,
 		 * the PE's state will be returned immediately.
 		 */
 		if (ret != EEH_STATE_UNAVAILABLE)
 			return ret;

 		max_wait -= mwait;
 		if (max_wait <= 0) {
 			pr_warning("%s: Timeout getting PE#%x's state (%d)\n",
 				   __func__, pe->addr, max_wait);
 			return EEH_STATE_NOT_SUPPORT;
 		}

 		msleep(mwait);
 	}

 	return EEH_STATE_NOT_SUPPORT;
 }

 /**
  * powernv_eeh_get_log - Retrieve error log
  * @pe: EEH PE
  * @severity: temporary or permanent error log
  * @drv_log: driver log to be combined with retrieved error log
  * @len: length of driver log
  *
  * Retrieve the temporary or permanent error from the PE.
  */
 static int powernv_eeh_get_log(struct eeh_pe *pe, int severity,
 			char *drv_log, unsigned long len)
 {
 	struct pci_controller *hose = pe->phb;
 	struct pnv_phb *phb = hose->private_data;
 	int ret = -EEXIST;

 	if (phb->eeh_ops && phb->eeh_ops->get_log)
 		ret = phb->eeh_ops->get_log(pe, severity, drv_log, len);

 	return ret;
 }

 /**
  * powernv_eeh_configure_bridge - Configure PCI bridges in the indicated PE
  * @pe: EEH PE
  *
  * The function will be called to reconfigure the bridges included
  * in the specified PE so that the mulfunctional PE would be recovered
  * again.
  */
 static int powernv_eeh_configure_bridge(struct eeh_pe *pe)
 {
 	struct pci_controller *hose = pe->phb;
 	struct pnv_phb *phb = hose->private_data;
 	int ret = 0;

 	if (phb->eeh_ops && phb->eeh_ops->configure_bridge)
 		ret = phb->eeh_ops->configure_bridge(pe);

 	return ret;
 }

 /**
  * powernv_eeh_next_error - Retrieve next EEH error to handle
  * @pe: Affected PE
  *
  * Using OPAL API, to retrieve next EEH error for EEH core to handle
  */
 static int powernv_eeh_next_error(struct eeh_pe **pe)
 {
 	struct pci_controller *hose;
 	struct pnv_phb *phb = NULL;

 	list_for_each_entry(hose, &hose_list, list_node) {
 		phb = hose->private_data;
 		break;
 	}

 	if (phb && phb->eeh_ops->next_error)
 		return phb->eeh_ops->next_error(pe);

 	return -EEXIST;
 }

 static struct eeh_ops powernv_eeh_ops = {
 	.name                   = "powernv",
 	.init                   = powernv_eeh_init,
 	.post_init              = powernv_eeh_post_init,
 	.of_probe               = NULL,
 	.dev_probe              = powernv_eeh_dev_probe,
 	.set_option             = powernv_eeh_set_option,
 	.get_pe_addr            = powernv_eeh_get_pe_addr,
 	.get_state              = powernv_eeh_get_state,
 	.reset                  = powernv_eeh_reset,
 	.wait_state             = powernv_eeh_wait_state,
 	.get_log                = powernv_eeh_get_log,
 	.configure_bridge       = powernv_eeh_configure_bridge,
 	.read_config            = pnv_pci_cfg_read,
 	.write_config           = pnv_pci_cfg_write,
 	.next_error		= powernv_eeh_next_error
 };

 /**
  * eeh_powernv_init - Register platform dependent EEH operations
  *
  * EEH initialization on powernv platform. This function should be
  * called before any EEH related functions.
  */
 static int __init eeh_powernv_init(void)
 {
 	int ret = -EINVAL;

 	if (!machine_is(powernv))
 		return ret;

 	ret = eeh_ops_register(&powernv_eeh_ops);
 	if (!ret)
 		pr_info("EEH: PowerNV platform initialized\n");
 	else
 		pr_info("EEH: Failed to initialize PowerNV platform (%d)\n", ret);

 	return ret;
 }

 early_initcall(eeh_powernv_init);
	/*
	* The file intends to implement the platform dependent EEH operations on
	* powernv platform. Actually, the powernv was created in order to fully
	* hypervisor support.
	*
	* Copyright Benjamin Herrenschmidt & Gavin Shan, IBM Corporation 2013.
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License as published by
	* the Free Software Foundation; either version 2 of the License, or
	* (at your option) any later version.
	*/

	#include <linux/atomic.h>
	#include <linux/delay.h>
	#include <linux/export.h>
	#include <linux/init.h>
	#include <linux/list.h>
	#include <linux/msi.h>
	#include <linux/of.h>
	#include <linux/pci.h>
	#include <linux/proc_fs.h>
	#include <linux/rbtree.h>
	#include <linux/sched.h>
	#include <linux/seq_file.h>
	#include <linux/spinlock.h>

	#include <asm/eeh.h>
	#include <asm/eeh_event.h>
	#include <asm/firmware.h>
	#include <asm/io.h>
	#include <asm/iommu.h>
	#include <asm/machdep.h>
	#include <asm/msi_bitmap.h>
	#include <asm/opal.h>
	#include <asm/ppc-pci.h>

	#include "powernv.h"
	#include "pci.h"

	/**
	* powernv_eeh_init - EEH platform dependent initialization
	*
	* EEH platform dependent initialization on powernv
	*/
	static int powernv_eeh_init(void)
	{
	/* We require OPALv3 */
	if (!firmware_has_feature(FW_FEATURE_OPALv3)) {
	pr_warning("%s: OPALv3 is required !\n", __func__);
	return -EINVAL;
	}

	/* Set EEH probe mode */
	eeh_probe_mode_set(EEH_PROBE_MODE_DEV);

	return 0;
	}

	/**
	* powernv_eeh_post_init - EEH platform dependent post initialization
	*
	* EEH platform dependent post initialization on powernv. When
	* the function is called, the EEH PEs and devices should have
	* been built. If the I/O cache staff has been built, EEH is
	* ready to supply service.
	*/
	static int powernv_eeh_post_init(void)
	{
	struct pci_controller *hose;
	struct pnv_phb *phb;
	int ret = 0;

	list_for_each_entry(hose, &hose_list, list_node) {
	phb = hose->private_data;

	if (phb->eeh_ops && phb->eeh_ops->post_init) {
	ret = phb->eeh_ops->post_init(hose);
	if (ret)
	break;
	}
	}

	return ret;
	}

	/**
	* powernv_eeh_dev_probe - Do probe on PCI device
	* @dev: PCI device
	* @flag: unused
	*
	* When EEH module is installed during system boot, all PCI devices
	* are checked one by one to see if it supports EEH. The function
	* is introduced for the purpose. By default, EEH has been enabled
	* on all PCI devices. That's to say, we only need do necessary
	* initialization on the corresponding eeh device and create PE
	* accordingly.
	*
	* It's notable that's unsafe to retrieve the EEH device through
	* the corresponding PCI device. During the PCI device hotplug, which
	* was possiblly triggered by EEH core, the binding between EEH device
	* and the PCI device isn't built yet.
	*/
	static int powernv_eeh_dev_probe(struct pci_dev dev, void flag)
	{
	struct pci_controller *hose = pci_bus_to_host(dev->bus);
	struct pnv_phb *phb = hose->private_data;
	struct device_node *dn = pci_device_to_OF_node(dev);
	struct eeh_dev *edev = of_node_to_eeh_dev(dn);

	/*
	* When probing the root bridge, which doesn't have any
	* subordinate PCI devices. We don't have OF node for
	* the root bridge. So it's not reasonable to continue
	* the probing.
	*/
	if (!dn \|\| !edev)
	return 0;

	/* Skip for PCI-ISA bridge */
	if ((dev->class >> 8) == PCI_CLASS_BRIDGE_ISA)
	return 0;

	/* Initialize eeh device */
	edev->class_code = dev->class;
	edev->mode = 0;
	edev->config_addr = ((dev->bus->number << 8) \| dev->devfn);
	edev->pe_config_addr = phb->bdfn_to_pe(phb, dev->bus, dev->devfn & 0xff);

	/* Create PE */
	eeh_add_to_parent_pe(edev);

	/*
	* Enable EEH explicitly so that we will do EEH check
	* while accessing I/O stuff
	*
	* FIXME: Enable that for PHB3 later
	*/
	if (phb->type == PNV_PHB_IODA1)
	eeh_subsystem_enabled = 1;

	/* Save memory bars */
	eeh_save_bars(edev);

	return 0;
	}

	/**
	* powernv_eeh_set_option - Initialize EEH or MMIO/DMA reenable
	* @pe: EEH PE
	* @option: operation to be issued
	*
	* The function is used to control the EEH functionality globally.
	* Currently, following options are support according to PAPR:
	* Enable EEH, Disable EEH, Enable MMIO and Enable DMA
	*/
	static int powernv_eeh_set_option(struct eeh_pe *pe, int option)
	{
	struct pci_controller *hose = pe->phb;
	struct pnv_phb *phb = hose->private_data;
	int ret = -EEXIST;

	/*
	* What we need do is pass it down for hardware
	* implementation to handle it.
	*/
	if (phb->eeh_ops && phb->eeh_ops->set_option)
	ret = phb->eeh_ops->set_option(pe, option);

	return ret;
	}

	/**
	* powernv_eeh_get_pe_addr - Retrieve PE address
	* @pe: EEH PE
	*
	* Retrieve the PE address according to the given tranditional
	* PCI BDF (Bus/Device/Function) address.
	*/
	static int powernv_eeh_get_pe_addr(struct eeh_pe *pe)
	{
	return pe->addr;
	}

	/**
	* powernv_eeh_get_state - Retrieve PE state
	* @pe: EEH PE
	* @delay: delay while PE state is temporarily unavailable
	*
	* Retrieve the state of the specified PE. For IODA-compitable
	* platform, it should be retrieved from IODA table. Therefore,
	* we prefer passing down to hardware implementation to handle
	* it.
	*/
	static int powernv_eeh_get_state(struct eeh_pe pe, int delay)
	{
	struct pci_controller *hose = pe->phb;
	struct pnv_phb *phb = hose->private_data;
	int ret = EEH_STATE_NOT_SUPPORT;

	if (phb->eeh_ops && phb->eeh_ops->get_state) {
	ret = phb->eeh_ops->get_state(pe);

	/*
	* If the PE state is temporarily unavailable,
	* to inform the EEH core delay for default
	* period (1 second)
	*/
	if (delay) {
	*delay = 0;
	if (ret & EEH_STATE_UNAVAILABLE)
	*delay = 1000;
	}
	}

	return ret;
	}

	/**
	* powernv_eeh_reset - Reset the specified PE
	* @pe: EEH PE
	* @option: reset option
	*
	* Reset the specified PE
	*/
	static int powernv_eeh_reset(struct eeh_pe *pe, int option)
	{
	struct pci_controller *hose = pe->phb;
	struct pnv_phb *phb = hose->private_data;
	int ret = -EEXIST;

	if (phb->eeh_ops && phb->eeh_ops->reset)
	ret = phb->eeh_ops->reset(pe, option);

	return ret;
	}

	/**
	* powernv_eeh_wait_state - Wait for PE state
	* @pe: EEH PE
	* @max_wait: maximal period in microsecond
	*
	* Wait for the state of associated PE. It might take some time
	* to retrieve the PE's state.
	*/
	static int powernv_eeh_wait_state(struct eeh_pe *pe, int max_wait)
	{
	int ret;
	int mwait;

	while (1) {
	ret = powernv_eeh_get_state(pe, &mwait);

	/*
	* If the PE's state is temporarily unavailable,
	* we have to wait for the specified time. Otherwise,
	* the PE's state will be returned immediately.
	*/
	if (ret != EEH_STATE_UNAVAILABLE)
	return ret;

	max_wait -= mwait;
	if (max_wait <= 0) {
	pr_warning("%s: Timeout getting PE#%x's state (%d)\n",
	__func__, pe->addr, max_wait);
	return EEH_STATE_NOT_SUPPORT;
	}

	msleep(mwait);
	}

	return EEH_STATE_NOT_SUPPORT;
	}

	/**
	* powernv_eeh_get_log - Retrieve error log
	* @pe: EEH PE
	* @severity: temporary or permanent error log
	* @drv_log: driver log to be combined with retrieved error log
	* @len: length of driver log
	*
	* Retrieve the temporary or permanent error from the PE.
	*/
	static int powernv_eeh_get_log(struct eeh_pe *pe, int severity,
	char *drv_log, unsigned long len)
	{
	struct pci_controller *hose = pe->phb;
	struct pnv_phb *phb = hose->private_data;
	int ret = -EEXIST;

	if (phb->eeh_ops && phb->eeh_ops->get_log)
	ret = phb->eeh_ops->get_log(pe, severity, drv_log, len);

	return ret;
	}

	/**
	* powernv_eeh_configure_bridge - Configure PCI bridges in the indicated PE
	* @pe: EEH PE
	*
	* The function will be called to reconfigure the bridges included
	* in the specified PE so that the mulfunctional PE would be recovered
	* again.
	*/
	static int powernv_eeh_configure_bridge(struct eeh_pe *pe)
	{
	struct pci_controller *hose = pe->phb;
	struct pnv_phb *phb = hose->private_data;
	int ret = 0;

	if (phb->eeh_ops && phb->eeh_ops->configure_bridge)
	ret = phb->eeh_ops->configure_bridge(pe);

	return ret;
	}

	/**
	* powernv_eeh_next_error - Retrieve next EEH error to handle
	* @pe: Affected PE
	*
	* Using OPAL API, to retrieve next EEH error for EEH core to handle
	*/
	static int powernv_eeh_next_error(struct eeh_pe **pe)
	{
	struct pci_controller *hose;
	struct pnv_phb *phb = NULL;

	list_for_each_entry(hose, &hose_list, list_node) {
	phb = hose->private_data;
	break;
	}

	if (phb && phb->eeh_ops->next_error)
	return phb->eeh_ops->next_error(pe);

	return -EEXIST;
	}

	static struct eeh_ops powernv_eeh_ops = {
	.name = "powernv",
	.init = powernv_eeh_init,
	.post_init = powernv_eeh_post_init,
	.of_probe = NULL,
	.dev_probe = powernv_eeh_dev_probe,
	.set_option = powernv_eeh_set_option,
	.get_pe_addr = powernv_eeh_get_pe_addr,
	.get_state = powernv_eeh_get_state,
	.reset = powernv_eeh_reset,
	.wait_state = powernv_eeh_wait_state,
	.get_log = powernv_eeh_get_log,
	.configure_bridge = powernv_eeh_configure_bridge,
	.read_config = pnv_pci_cfg_read,
	.write_config = pnv_pci_cfg_write,
	.next_error = powernv_eeh_next_error
	};

	/**
	* eeh_powernv_init - Register platform dependent EEH operations
	*
	* EEH initialization on powernv platform. This function should be
	* called before any EEH related functions.
	*/
	static int __init eeh_powernv_init(void)
	{
	int ret = -EINVAL;

	if (!machine_is(powernv))
	return ret;

	ret = eeh_ops_register(&powernv_eeh_ops);
	if (!ret)
	pr_info("EEH: PowerNV platform initialized\n");
	else
	pr_info("EEH: Failed to initialize PowerNV platform (%d)\n", ret);

	return ret;
	}

	early_initcall(eeh_powernv_init);