| /* |
| * Copyright (C) 2004 Jeff Dike (jdike@addtoit.com) |
| * Licensed under the GPL |
| */ |
| |
| #include <stdlib.h> |
| #include <unistd.h> |
| #include <signal.h> |
| #include <errno.h> |
| #include <sched.h> |
| #include <sys/syscall.h> |
| #include "os.h" |
| #include "aio.h" |
| #include "init.h" |
| #include "user.h" |
| #include "mode.h" |
| |
| struct aio_thread_req { |
| enum aio_type type; |
| int io_fd; |
| unsigned long long offset; |
| char *buf; |
| int len; |
| struct aio_context *aio; |
| }; |
| |
| static int aio_req_fd_r = -1; |
| static int aio_req_fd_w = -1; |
| |
| #if defined(HAVE_AIO_ABI) |
| #include <linux/aio_abi.h> |
| |
| /* If we have the headers, we are going to build with AIO enabled. |
| * If we don't have aio in libc, we define the necessary stubs here. |
| */ |
| |
| #if !defined(HAVE_AIO_LIBC) |
| |
| static long io_setup(int n, aio_context_t *ctxp) |
| { |
| return syscall(__NR_io_setup, n, ctxp); |
| } |
| |
| static long io_submit(aio_context_t ctx, long nr, struct iocb **iocbpp) |
| { |
| return syscall(__NR_io_submit, ctx, nr, iocbpp); |
| } |
| |
| static long io_getevents(aio_context_t ctx_id, long min_nr, long nr, |
| struct io_event *events, struct timespec *timeout) |
| { |
| return syscall(__NR_io_getevents, ctx_id, min_nr, nr, events, timeout); |
| } |
| |
| #endif |
| |
| /* The AIO_MMAP cases force the mmapped page into memory here |
| * rather than in whatever place first touches the data. I used |
| * to do this by touching the page, but that's delicate because |
| * gcc is prone to optimizing that away. So, what's done here |
| * is we read from the descriptor from which the page was |
| * mapped. The caller is required to pass an offset which is |
| * inside the page that was mapped. Thus, when the read |
| * returns, we know that the page is in the page cache, and |
| * that it now backs the mmapped area. |
| */ |
| |
| static int do_aio(aio_context_t ctx, enum aio_type type, int fd, char *buf, |
| int len, unsigned long long offset, struct aio_context *aio) |
| { |
| struct iocb iocb, *iocbp = &iocb; |
| char c; |
| int err; |
| |
| iocb = ((struct iocb) { .aio_data = (unsigned long) aio, |
| .aio_reqprio = 0, |
| .aio_fildes = fd, |
| .aio_buf = (unsigned long) buf, |
| .aio_nbytes = len, |
| .aio_offset = offset, |
| .aio_reserved1 = 0, |
| .aio_reserved2 = 0, |
| .aio_reserved3 = 0 }); |
| |
| switch(type){ |
| case AIO_READ: |
| iocb.aio_lio_opcode = IOCB_CMD_PREAD; |
| err = io_submit(ctx, 1, &iocbp); |
| break; |
| case AIO_WRITE: |
| iocb.aio_lio_opcode = IOCB_CMD_PWRITE; |
| err = io_submit(ctx, 1, &iocbp); |
| break; |
| case AIO_MMAP: |
| iocb.aio_lio_opcode = IOCB_CMD_PREAD; |
| iocb.aio_buf = (unsigned long) &c; |
| iocb.aio_nbytes = sizeof(c); |
| err = io_submit(ctx, 1, &iocbp); |
| break; |
| default: |
| printk("Bogus op in do_aio - %d\n", type); |
| err = -EINVAL; |
| break; |
| } |
| |
| if(err > 0) |
| err = 0; |
| else |
| err = -errno; |
| |
| return err; |
| } |
| |
| static aio_context_t ctx = 0; |
| |
| static int aio_thread(void *arg) |
| { |
| struct aio_thread_reply reply; |
| struct io_event event; |
| int err, n, reply_fd; |
| |
| signal(SIGWINCH, SIG_IGN); |
| |
| while(1){ |
| n = io_getevents(ctx, 1, 1, &event, NULL); |
| if(n < 0){ |
| if(errno == EINTR) |
| continue; |
| printk("aio_thread - io_getevents failed, " |
| "errno = %d\n", errno); |
| } |
| else { |
| reply = ((struct aio_thread_reply) |
| { .data = (void *) (long) event.data, |
| .err = event.res }); |
| reply_fd = ((struct aio_context *) reply.data)->reply_fd; |
| err = os_write_file(reply_fd, &reply, sizeof(reply)); |
| if(err != sizeof(reply)) |
| printk("aio_thread - write failed, fd = %d, " |
| "err = %d\n", aio_req_fd_r, -err); |
| } |
| } |
| return 0; |
| } |
| |
| #endif |
| |
| static int do_not_aio(struct aio_thread_req *req) |
| { |
| char c; |
| int err; |
| |
| switch(req->type){ |
| case AIO_READ: |
| err = os_seek_file(req->io_fd, req->offset); |
| if(err) |
| goto out; |
| |
| err = os_read_file(req->io_fd, req->buf, req->len); |
| break; |
| case AIO_WRITE: |
| err = os_seek_file(req->io_fd, req->offset); |
| if(err) |
| goto out; |
| |
| err = os_write_file(req->io_fd, req->buf, req->len); |
| break; |
| case AIO_MMAP: |
| err = os_seek_file(req->io_fd, req->offset); |
| if(err) |
| goto out; |
| |
| err = os_read_file(req->io_fd, &c, sizeof(c)); |
| break; |
| default: |
| printk("do_not_aio - bad request type : %d\n", req->type); |
| err = -EINVAL; |
| break; |
| } |
| |
| out: |
| return err; |
| } |
| |
| static int not_aio_thread(void *arg) |
| { |
| struct aio_thread_req req; |
| struct aio_thread_reply reply; |
| int err; |
| |
| signal(SIGWINCH, SIG_IGN); |
| while(1){ |
| err = os_read_file(aio_req_fd_r, &req, sizeof(req)); |
| if(err != sizeof(req)){ |
| if(err < 0) |
| printk("not_aio_thread - read failed, " |
| "fd = %d, err = %d\n", aio_req_fd_r, |
| -err); |
| else { |
| printk("not_aio_thread - short read, fd = %d, " |
| "length = %d\n", aio_req_fd_r, err); |
| } |
| continue; |
| } |
| err = do_not_aio(&req); |
| reply = ((struct aio_thread_reply) { .data = req.aio, |
| .err = err }); |
| err = os_write_file(req.aio->reply_fd, &reply, sizeof(reply)); |
| if(err != sizeof(reply)) |
| printk("not_aio_thread - write failed, fd = %d, " |
| "err = %d\n", aio_req_fd_r, -err); |
| } |
| } |
| |
| static int aio_pid = -1; |
| |
| static int init_aio_24(void) |
| { |
| unsigned long stack; |
| int fds[2], err; |
| |
| err = os_pipe(fds, 1, 1); |
| if(err) |
| goto out; |
| |
| aio_req_fd_w = fds[0]; |
| aio_req_fd_r = fds[1]; |
| err = run_helper_thread(not_aio_thread, NULL, |
| CLONE_FILES | CLONE_VM | SIGCHLD, &stack, 0); |
| if(err < 0) |
| goto out_close_pipe; |
| |
| aio_pid = err; |
| goto out; |
| |
| out_close_pipe: |
| os_close_file(fds[0]); |
| os_close_file(fds[1]); |
| aio_req_fd_w = -1; |
| aio_req_fd_r = -1; |
| out: |
| #ifndef HAVE_AIO_ABI |
| printk("/usr/include/linux/aio_abi.h not present during build\n"); |
| #endif |
| printk("2.6 host AIO support not used - falling back to I/O " |
| "thread\n"); |
| return 0; |
| } |
| |
| #ifdef HAVE_AIO_ABI |
| #define DEFAULT_24_AIO 0 |
| static int init_aio_26(void) |
| { |
| unsigned long stack; |
| int err; |
| |
| if(io_setup(256, &ctx)){ |
| err = -errno; |
| printk("aio_thread failed to initialize context, err = %d\n", |
| errno); |
| return err; |
| } |
| |
| err = run_helper_thread(aio_thread, NULL, |
| CLONE_FILES | CLONE_VM | SIGCHLD, &stack, 0); |
| if(err < 0) |
| return err; |
| |
| aio_pid = err; |
| |
| printk("Using 2.6 host AIO\n"); |
| return 0; |
| } |
| |
| static int submit_aio_26(enum aio_type type, int io_fd, char *buf, int len, |
| unsigned long long offset, struct aio_context *aio) |
| { |
| struct aio_thread_reply reply; |
| int err; |
| |
| err = do_aio(ctx, type, io_fd, buf, len, offset, aio); |
| if(err){ |
| reply = ((struct aio_thread_reply) { .data = aio, |
| .err = err }); |
| err = os_write_file(aio->reply_fd, &reply, sizeof(reply)); |
| if(err != sizeof(reply)) |
| printk("submit_aio_26 - write failed, " |
| "fd = %d, err = %d\n", aio->reply_fd, -err); |
| else err = 0; |
| } |
| |
| return err; |
| } |
| |
| #else |
| #define DEFAULT_24_AIO 1 |
| static int init_aio_26(void) |
| { |
| return -ENOSYS; |
| } |
| |
| static int submit_aio_26(enum aio_type type, int io_fd, char *buf, int len, |
| unsigned long long offset, struct aio_context *aio) |
| { |
| return -ENOSYS; |
| } |
| #endif |
| |
| static int aio_24 = DEFAULT_24_AIO; |
| |
| static int __init set_aio_24(char *name, int *add) |
| { |
| aio_24 = 1; |
| return 0; |
| } |
| |
| __uml_setup("aio=2.4", set_aio_24, |
| "aio=2.4\n" |
| " This is used to force UML to use 2.4-style AIO even when 2.6 AIO is\n" |
| " available. 2.4 AIO is a single thread that handles one request at a\n" |
| " time, synchronously. 2.6 AIO is a thread which uses the 2.6 AIO \n" |
| " interface to handle an arbitrary number of pending requests. 2.6 AIO \n" |
| " is not available in tt mode, on 2.4 hosts, or when UML is built with\n" |
| " /usr/include/linux/aio_abi.h not available. Many distributions don't\n" |
| " include aio_abi.h, so you will need to copy it from a kernel tree to\n" |
| " your /usr/include/linux in order to build an AIO-capable UML\n\n" |
| ); |
| |
| static int init_aio(void) |
| { |
| int err; |
| |
| CHOOSE_MODE(({ |
| if(!aio_24){ |
| printk("Disabling 2.6 AIO in tt mode\n"); |
| aio_24 = 1; |
| } }), (void) 0); |
| |
| if(!aio_24){ |
| err = init_aio_26(); |
| if(err && (errno == ENOSYS)){ |
| printk("2.6 AIO not supported on the host - " |
| "reverting to 2.4 AIO\n"); |
| aio_24 = 1; |
| } |
| else return err; |
| } |
| |
| if(aio_24) |
| return init_aio_24(); |
| |
| return 0; |
| } |
| |
| /* The reason for the __initcall/__uml_exitcall asymmetry is that init_aio |
| * needs to be called when the kernel is running because it calls run_helper, |
| * which needs get_free_page. exit_aio is a __uml_exitcall because the generic |
| * kernel does not run __exitcalls on shutdown, and can't because many of them |
| * break when called outside of module unloading. |
| */ |
| __initcall(init_aio); |
| |
| static void exit_aio(void) |
| { |
| if(aio_pid != -1) |
| os_kill_process(aio_pid, 1); |
| } |
| |
| __uml_exitcall(exit_aio); |
| |
| static int submit_aio_24(enum aio_type type, int io_fd, char *buf, int len, |
| unsigned long long offset, struct aio_context *aio) |
| { |
| struct aio_thread_req req = { .type = type, |
| .io_fd = io_fd, |
| .offset = offset, |
| .buf = buf, |
| .len = len, |
| .aio = aio, |
| }; |
| int err; |
| |
| err = os_write_file(aio_req_fd_w, &req, sizeof(req)); |
| if(err == sizeof(req)) |
| err = 0; |
| |
| return err; |
| } |
| |
| int submit_aio(enum aio_type type, int io_fd, char *buf, int len, |
| unsigned long long offset, int reply_fd, |
| struct aio_context *aio) |
| { |
| aio->reply_fd = reply_fd; |
| if(aio_24) |
| return submit_aio_24(type, io_fd, buf, len, offset, aio); |
| else { |
| return submit_aio_26(type, io_fd, buf, len, offset, aio); |
| } |
| } |