| # |
| # USB Miscellaneous driver configuration |
| # |
| comment "USB Miscellaneous drivers" |
| depends on USB |
| |
| config USB_EMI62 |
| tristate "EMI 6|2m USB Audio interface support" |
| depends on USB |
| ---help--- |
| This driver loads firmware to Emagic EMI 6|2m low latency USB |
| Audio and Midi interface. |
| |
| After firmware load the device is handled with standard linux |
| USB Audio driver. |
| |
| This code is also available as a module ( = code which can be |
| inserted in and removed from the running kernel whenever you want). |
| The module will be called audio. If you want to compile it as a |
| module, say M here and read <file:Documentation/kbuild/modules.txt>. |
| |
| config USB_EMI26 |
| tristate "EMI 2|6 USB Audio interface support" |
| depends on USB |
| ---help--- |
| This driver loads firmware to Emagic EMI 2|6 low latency USB |
| Audio interface. |
| |
| After firmware load the device is handled with standard linux |
| USB Audio driver. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called emi26. |
| |
| config USB_ADUTUX |
| tristate "ADU devices from Ontrak Control Systems" |
| depends on USB |
| help |
| Say Y if you want to use an ADU device from Ontrak Control |
| Systems. |
| |
| To compile this driver as a module, choose M here. The module |
| will be called adutux. |
| |
| config USB_AUERSWALD |
| tristate "USB Auerswald ISDN support" |
| depends on USB |
| help |
| Say Y here if you want to connect an Auerswald USB ISDN Device |
| to your computer's USB port. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called auerswald. |
| |
| config USB_RIO500 |
| tristate "USB Diamond Rio500 support" |
| depends on USB |
| help |
| Say Y here if you want to connect a USB Rio500 mp3 player to your |
| computer's USB port. Please read <file:Documentation/usb/rio.txt> |
| for more information. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called rio500. |
| |
| config USB_LEGOTOWER |
| tristate "USB Lego Infrared Tower support" |
| depends on USB |
| help |
| Say Y here if you want to connect a USB Lego Infrared Tower to your |
| computer's USB port. |
| |
| This code is also available as a module ( = code which can be |
| inserted in and removed from the running kernel whenever you want). |
| The module will be called legousbtower. If you want to compile it as |
| a module, say M here and read |
| <file:Documentation/kbuild/modules.txt>. |
| |
| config USB_LCD |
| tristate "USB LCD driver support" |
| depends on USB |
| help |
| Say Y here if you want to connect an USBLCD to your computer's |
| USB port. The USBLCD is a small USB interface board for |
| alphanumeric LCD modules. See <http://www.usblcd.de/> for more |
| information. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called usblcd. |
| |
| config USB_BERRY_CHARGE |
| tristate "USB BlackBerry recharge support" |
| depends on USB |
| help |
| Say Y here if you want to connect a BlackBerry device to your |
| computer's USB port and have it automatically switch to "recharge" |
| mode. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called berry_charge. |
| |
| config USB_LED |
| tristate "USB LED driver support" |
| depends on USB |
| help |
| Say Y here if you want to connect an USBLED device to your |
| computer's USB port. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called usbled. |
| |
| config USB_CYPRESS_CY7C63 |
| tristate "Cypress CY7C63xxx USB driver support" |
| depends on USB |
| help |
| Say Y here if you want to connect a Cypress CY7C63xxx |
| micro controller to your computer's USB port. Currently this |
| driver supports the pre-programmed devices (incl. firmware) |
| by AK Modul-Bus Computer GmbH. |
| |
| Please see: http://www.ak-modul-bus.de/stat/mikrocontroller.html |
| |
| To compile this driver as a module, choose M here: the |
| module will be called cypress_cy7c63. |
| |
| config USB_CYTHERM |
| tristate "Cypress USB thermometer driver support" |
| depends on USB |
| help |
| Say Y here if you want to connect a Cypress USB thermometer |
| device to your computer's USB port. This device is also known |
| as the Cypress USB Starter kit or demo board. The Elektor |
| magazine published a modified version of this device in issue |
| #291. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called cytherm. |
| |
| config USB_PHIDGET |
| tristate "USB Phidgets drivers" |
| depends on USB |
| help |
| Say Y here to enable the various drivers for devices from |
| Phidgets inc. |
| |
| config USB_PHIDGETKIT |
| tristate "USB PhidgetInterfaceKit support" |
| depends on USB_PHIDGET |
| help |
| Say Y here if you want to connect a PhidgetInterfaceKit USB device |
| from Phidgets Inc. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called phidgetkit. |
| |
| config USB_PHIDGETMOTORCONTROL |
| tristate "USB PhidgetMotorControl support" |
| depends on USB_PHIDGET |
| help |
| Say Y here if you want to connect a PhidgetMotorControl USB device |
| from Phidgets Inc. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called phidgetmotorcontrol. |
| |
| config USB_PHIDGETSERVO |
| tristate "USB PhidgetServo support" |
| depends on USB_PHIDGET |
| help |
| Say Y here if you want to connect an 1 or 4 Motor PhidgetServo |
| servo controller version 2.0 or 3.0. |
| |
| Phidgets Inc. has a web page at <http://www.phidgets.com/>. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called phidgetservo. |
| |
| config USB_IDMOUSE |
| tristate "Siemens ID USB Mouse Fingerprint sensor support" |
| depends on USB |
| help |
| Say Y here if you want to use the fingerprint sensor on |
| the Siemens ID Mouse. There is also a Siemens ID Mouse |
| _Professional_, which has not been tested with this driver, |
| but uses the same sensor and may therefore work. |
| |
| This driver creates an entry "/dev/idmouseX" or "/dev/usb/idmouseX", |
| which can be used by, e.g.,"cat /dev/idmouse0 > fingerprint.pnm". |
| |
| See also <http://www.fs.tum.de/~echtler/idmouse/>. |
| |
| config USB_FTDI_ELAN |
| tristate "Elan PCMCIA CardBus Adapter USB Client" |
| depends on USB |
| default M |
| help |
| ELAN's Uxxx series of adapters are USB to PCMCIA CardBus adapters. |
| Currently only the U132 adapter is available. |
| |
| The U132 is specifically designed for CardBus PC cards that contain |
| an OHCI host controller. Typical PC cards are the Orange Mobile 3G |
| Option GlobeTrotter Fusion card. The U132 adapter will *NOT* work |
| with PC cards that do not contain an OHCI controller. To use a U132 |
| adapter you will need this "ftdi-elan" module as well as the "u132-hcd" |
| module which is a USB host controller driver that talks to the OHCI |
| controller within CardBus card that are inserted in the U132 adapter. |
| |
| This driver has been tested with a CardBus OHCI USB adapter, and |
| worked with a USB PEN Drive inserted into the first USB port of |
| the PCCARD. A rather pointless thing to do, but useful for testing. |
| |
| See also the USB_U132_HCD entry "Elan U132 Adapter Host Controller" |
| |
| It is safe to say M here. |
| |
| config USB_APPLEDISPLAY |
| tristate "Apple Cinema Display support" |
| depends on USB |
| select BACKLIGHT_LCD_SUPPORT |
| select BACKLIGHT_CLASS_DEVICE |
| help |
| Say Y here if you want to control the backlight of Apple Cinema |
| Displays over USB. This driver provides a sysfs interface. |
| |
| source "drivers/usb/misc/sisusbvga/Kconfig" |
| |
| config USB_LD |
| tristate "USB LD driver" |
| depends on USB |
| help |
| This driver is for generic USB devices that use interrupt transfers, |
| like LD Didactic's USB devices. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called ldusb. |
| |
| config USB_TRANCEVIBRATOR |
| tristate "PlayStation 2 Trance Vibrator driver support" |
| depends on USB |
| help |
| Say Y here if you want to connect a PlayStation 2 Trance Vibrator |
| device to your computer's USB port. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called trancevibrator. |
| |
| config USB_IOWARRIOR |
| tristate "IO Warrior driver support" |
| depends on USB |
| help |
| Say Y here if you want to support the IO Warrior devices from Code |
| Mercenaries. This includes support for the following devices: |
| IO Warrior 40 |
| IO Warrior 24 |
| IO Warrior 56 |
| IO Warrior 24 Power Vampire |
| |
| To compile this driver as a module, choose M here: the |
| module will be called iowarrior. |
| |
| config USB_TEST |
| tristate "USB testing driver" |
| depends on USB && USB_DEVICEFS |
| help |
| This driver is for testing host controller software. It is used |
| with specialized device firmware for regression and stress testing, |
| to help prevent problems from cropping up with "real" drivers. |
| |
| See <http://www.linux-usb.org/usbtest/> for more information, |
| including sample test device firmware and "how to use it". |
| |
| config USB_ISIGHTFW |
| tristate "iSight firmware loading support" |
| depends on USB |
| help |
| This driver loads firmware for USB Apple iSight cameras, allowing |
| them to be driven by the USB video class driver available at |
| http://linux-uvc.berlios.de |
| |
| The firmware for this driver must be extracted from the MacOS |
| driver beforehand. Tools for doing so are available at |
| http://bersace03.free.fr |