| /***************************************************************************/ |
| |
| /* |
| * linux/arch/m68knommu/platform/520x/config.c |
| * |
| * Copyright (C) 2005, Freescale (www.freescale.com) |
| * Copyright (C) 2005, Intec Automation (mike@steroidmicros.com) |
| * Copyright (C) 1999-2007, Greg Ungerer (gerg@snapgear.com) |
| * Copyright (C) 2001-2003, SnapGear Inc. (www.snapgear.com) |
| */ |
| |
| /***************************************************************************/ |
| |
| #include <linux/kernel.h> |
| #include <linux/param.h> |
| #include <linux/init.h> |
| #include <linux/io.h> |
| #include <asm/machdep.h> |
| #include <asm/coldfire.h> |
| #include <asm/mcfsim.h> |
| #include <asm/mcfuart.h> |
| |
| /***************************************************************************/ |
| |
| #ifdef CONFIG_SPI_COLDFIRE_QSPI |
| |
| static void __init m520x_qspi_init(void) |
| { |
| u16 par; |
| /* setup Port QS for QSPI with gpio CS control */ |
| writeb(0x3f, MCF_GPIO_PAR_QSPI); |
| /* make U1CTS and U2RTS gpio for cs_control */ |
| par = readw(MCF_GPIO_PAR_UART); |
| par &= 0x00ff; |
| writew(par, MCF_GPIO_PAR_UART); |
| } |
| |
| #endif /* CONFIG_SPI_COLDFIRE_QSPI */ |
| |
| /***************************************************************************/ |
| |
| static void __init m520x_uarts_init(void) |
| { |
| u16 par; |
| u8 par2; |
| |
| /* UART0 and UART1 GPIO pin setup */ |
| par = readw(MCF_GPIO_PAR_UART); |
| par |= MCF_GPIO_PAR_UART_PAR_UTXD0 | MCF_GPIO_PAR_UART_PAR_URXD0; |
| par |= MCF_GPIO_PAR_UART_PAR_UTXD1 | MCF_GPIO_PAR_UART_PAR_URXD1; |
| writew(par, MCF_GPIO_PAR_UART); |
| |
| /* UART1 GPIO pin setup */ |
| par2 = readb(MCF_GPIO_PAR_FECI2C); |
| par2 &= ~0x0F; |
| par2 |= MCF_GPIO_PAR_FECI2C_PAR_SCL_UTXD2 | |
| MCF_GPIO_PAR_FECI2C_PAR_SDA_URXD2; |
| writeb(par2, MCF_GPIO_PAR_FECI2C); |
| } |
| |
| /***************************************************************************/ |
| |
| static void __init m520x_fec_init(void) |
| { |
| u8 v; |
| |
| /* Set multi-function pins to ethernet mode */ |
| v = readb(MCF_GPIO_PAR_FEC); |
| writeb(v | 0xf0, MCF_GPIO_PAR_FEC); |
| |
| v = readb(MCF_GPIO_PAR_FECI2C); |
| writeb(v | 0x0f, MCF_GPIO_PAR_FECI2C); |
| } |
| |
| /***************************************************************************/ |
| |
| void __init config_BSP(char *commandp, int size) |
| { |
| mach_sched_init = hw_timer_init; |
| m520x_uarts_init(); |
| m520x_fec_init(); |
| #ifdef CONFIG_SPI_COLDFIRE_QSPI |
| m520x_qspi_init(); |
| #endif |
| } |
| |
| /***************************************************************************/ |