| /* |
| * exynos_adc.c - Support for ADC in EXYNOS SoCs |
| * |
| * 8 ~ 10 channel, 10/12-bit ADC |
| * |
| * Copyright (C) 2013 Naveen Krishna Chatradhi <ch.naveen@samsung.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/interrupt.h> |
| #include <linux/delay.h> |
| #include <linux/kernel.h> |
| #include <linux/slab.h> |
| #include <linux/io.h> |
| #include <linux/clk.h> |
| #include <linux/completion.h> |
| #include <linux/of.h> |
| #include <linux/of_irq.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/of_platform.h> |
| |
| #include <linux/iio/iio.h> |
| #include <linux/iio/machine.h> |
| #include <linux/iio/driver.h> |
| |
| enum adc_version { |
| ADC_V1, |
| ADC_V2 |
| }; |
| |
| /* EXYNOS4412/5250 ADC_V1 registers definitions */ |
| #define ADC_V1_CON(x) ((x) + 0x00) |
| #define ADC_V1_DLY(x) ((x) + 0x08) |
| #define ADC_V1_DATX(x) ((x) + 0x0C) |
| #define ADC_V1_INTCLR(x) ((x) + 0x18) |
| #define ADC_V1_MUX(x) ((x) + 0x1c) |
| |
| /* Future ADC_V2 registers definitions */ |
| #define ADC_V2_CON1(x) ((x) + 0x00) |
| #define ADC_V2_CON2(x) ((x) + 0x04) |
| #define ADC_V2_STAT(x) ((x) + 0x08) |
| #define ADC_V2_INT_EN(x) ((x) + 0x10) |
| #define ADC_V2_INT_ST(x) ((x) + 0x14) |
| #define ADC_V2_VER(x) ((x) + 0x20) |
| |
| /* Bit definitions for ADC_V1 */ |
| #define ADC_V1_CON_RES (1u << 16) |
| #define ADC_V1_CON_PRSCEN (1u << 14) |
| #define ADC_V1_CON_PRSCLV(x) (((x) & 0xFF) << 6) |
| #define ADC_V1_CON_STANDBY (1u << 2) |
| |
| /* Bit definitions for ADC_V2 */ |
| #define ADC_V2_CON1_SOFT_RESET (1u << 2) |
| |
| #define ADC_V2_CON2_OSEL (1u << 10) |
| #define ADC_V2_CON2_ESEL (1u << 9) |
| #define ADC_V2_CON2_HIGHF (1u << 8) |
| #define ADC_V2_CON2_C_TIME(x) (((x) & 7) << 4) |
| #define ADC_V2_CON2_ACH_SEL(x) (((x) & 0xF) << 0) |
| #define ADC_V2_CON2_ACH_MASK 0xF |
| |
| #define MAX_ADC_V2_CHANNELS 10 |
| #define MAX_ADC_V1_CHANNELS 8 |
| |
| /* Bit definitions common for ADC_V1 and ADC_V2 */ |
| #define ADC_CON_EN_START (1u << 0) |
| #define ADC_DATX_MASK 0xFFF |
| |
| #define EXYNOS_ADC_TIMEOUT (msecs_to_jiffies(1000)) |
| |
| struct exynos_adc { |
| void __iomem *regs; |
| void __iomem *enable_reg; |
| struct clk *clk; |
| unsigned int irq; |
| struct regulator *vdd; |
| |
| struct completion completion; |
| |
| u32 value; |
| unsigned int version; |
| }; |
| |
| static const struct of_device_id exynos_adc_match[] = { |
| { .compatible = "samsung,exynos-adc-v1", .data = (void *)ADC_V1 }, |
| { .compatible = "samsung,exynos-adc-v2", .data = (void *)ADC_V2 }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, exynos_adc_match); |
| |
| static inline unsigned int exynos_adc_get_version(struct platform_device *pdev) |
| { |
| const struct of_device_id *match; |
| |
| match = of_match_node(exynos_adc_match, pdev->dev.of_node); |
| return (unsigned int)match->data; |
| } |
| |
| static int exynos_read_raw(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, |
| int *val, |
| int *val2, |
| long mask) |
| { |
| struct exynos_adc *info = iio_priv(indio_dev); |
| unsigned long timeout; |
| u32 con1, con2; |
| |
| if (mask != IIO_CHAN_INFO_RAW) |
| return -EINVAL; |
| |
| mutex_lock(&indio_dev->mlock); |
| |
| /* Select the channel to be used and Trigger conversion */ |
| if (info->version == ADC_V2) { |
| con2 = readl(ADC_V2_CON2(info->regs)); |
| con2 &= ~ADC_V2_CON2_ACH_MASK; |
| con2 |= ADC_V2_CON2_ACH_SEL(chan->address); |
| writel(con2, ADC_V2_CON2(info->regs)); |
| |
| con1 = readl(ADC_V2_CON1(info->regs)); |
| writel(con1 | ADC_CON_EN_START, |
| ADC_V2_CON1(info->regs)); |
| } else { |
| writel(chan->address, ADC_V1_MUX(info->regs)); |
| |
| con1 = readl(ADC_V1_CON(info->regs)); |
| writel(con1 | ADC_CON_EN_START, |
| ADC_V1_CON(info->regs)); |
| } |
| |
| timeout = wait_for_completion_interruptible_timeout |
| (&info->completion, EXYNOS_ADC_TIMEOUT); |
| *val = info->value; |
| |
| mutex_unlock(&indio_dev->mlock); |
| |
| if (timeout == 0) |
| return -ETIMEDOUT; |
| |
| return IIO_VAL_INT; |
| } |
| |
| static irqreturn_t exynos_adc_isr(int irq, void *dev_id) |
| { |
| struct exynos_adc *info = (struct exynos_adc *)dev_id; |
| |
| /* Read value */ |
| info->value = readl(ADC_V1_DATX(info->regs)) & |
| ADC_DATX_MASK; |
| /* clear irq */ |
| if (info->version == ADC_V2) |
| writel(1, ADC_V2_INT_ST(info->regs)); |
| else |
| writel(1, ADC_V1_INTCLR(info->regs)); |
| |
| complete(&info->completion); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int exynos_adc_reg_access(struct iio_dev *indio_dev, |
| unsigned reg, unsigned writeval, |
| unsigned *readval) |
| { |
| struct exynos_adc *info = iio_priv(indio_dev); |
| |
| if (readval == NULL) |
| return -EINVAL; |
| |
| *readval = readl(info->regs + reg); |
| |
| return 0; |
| } |
| |
| static const struct iio_info exynos_adc_iio_info = { |
| .read_raw = &exynos_read_raw, |
| .debugfs_reg_access = &exynos_adc_reg_access, |
| .driver_module = THIS_MODULE, |
| }; |
| |
| #define ADC_CHANNEL(_index, _id) { \ |
| .type = IIO_VOLTAGE, \ |
| .indexed = 1, \ |
| .channel = _index, \ |
| .address = _index, \ |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ |
| .datasheet_name = _id, \ |
| } |
| |
| static const struct iio_chan_spec exynos_adc_iio_channels[] = { |
| ADC_CHANNEL(0, "adc0"), |
| ADC_CHANNEL(1, "adc1"), |
| ADC_CHANNEL(2, "adc2"), |
| ADC_CHANNEL(3, "adc3"), |
| ADC_CHANNEL(4, "adc4"), |
| ADC_CHANNEL(5, "adc5"), |
| ADC_CHANNEL(6, "adc6"), |
| ADC_CHANNEL(7, "adc7"), |
| ADC_CHANNEL(8, "adc8"), |
| ADC_CHANNEL(9, "adc9"), |
| }; |
| |
| static int exynos_adc_remove_devices(struct device *dev, void *c) |
| { |
| struct platform_device *pdev = to_platform_device(dev); |
| |
| platform_device_unregister(pdev); |
| |
| return 0; |
| } |
| |
| static void exynos_adc_hw_init(struct exynos_adc *info) |
| { |
| u32 con1, con2; |
| |
| if (info->version == ADC_V2) { |
| con1 = ADC_V2_CON1_SOFT_RESET; |
| writel(con1, ADC_V2_CON1(info->regs)); |
| |
| con2 = ADC_V2_CON2_OSEL | ADC_V2_CON2_ESEL | |
| ADC_V2_CON2_HIGHF | ADC_V2_CON2_C_TIME(0); |
| writel(con2, ADC_V2_CON2(info->regs)); |
| |
| /* Enable interrupts */ |
| writel(1, ADC_V2_INT_EN(info->regs)); |
| } else { |
| /* set default prescaler values and Enable prescaler */ |
| con1 = ADC_V1_CON_PRSCLV(49) | ADC_V1_CON_PRSCEN; |
| |
| /* Enable 12-bit ADC resolution */ |
| con1 |= ADC_V1_CON_RES; |
| writel(con1, ADC_V1_CON(info->regs)); |
| } |
| } |
| |
| static int exynos_adc_probe(struct platform_device *pdev) |
| { |
| struct exynos_adc *info = NULL; |
| struct device_node *np = pdev->dev.of_node; |
| struct iio_dev *indio_dev = NULL; |
| struct resource *mem; |
| int ret = -ENODEV; |
| int irq; |
| |
| if (!np) |
| return ret; |
| |
| indio_dev = iio_device_alloc(sizeof(struct exynos_adc)); |
| if (!indio_dev) { |
| dev_err(&pdev->dev, "failed allocating iio device\n"); |
| return -ENOMEM; |
| } |
| |
| info = iio_priv(indio_dev); |
| |
| mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| info->regs = devm_request_and_ioremap(&pdev->dev, mem); |
| if (!info->regs) { |
| ret = -ENOMEM; |
| goto err_iio; |
| } |
| |
| mem = platform_get_resource(pdev, IORESOURCE_MEM, 1); |
| info->enable_reg = devm_request_and_ioremap(&pdev->dev, mem); |
| if (!info->enable_reg) { |
| ret = -ENOMEM; |
| goto err_iio; |
| } |
| |
| irq = platform_get_irq(pdev, 0); |
| if (irq < 0) { |
| dev_err(&pdev->dev, "no irq resource?\n"); |
| ret = irq; |
| goto err_iio; |
| } |
| |
| info->irq = irq; |
| |
| init_completion(&info->completion); |
| |
| ret = request_irq(info->irq, exynos_adc_isr, |
| 0, dev_name(&pdev->dev), info); |
| if (ret < 0) { |
| dev_err(&pdev->dev, "failed requesting irq, irq = %d\n", |
| info->irq); |
| goto err_iio; |
| } |
| |
| writel(1, info->enable_reg); |
| |
| info->clk = devm_clk_get(&pdev->dev, "adc"); |
| if (IS_ERR(info->clk)) { |
| dev_err(&pdev->dev, "failed getting clock, err = %ld\n", |
| PTR_ERR(info->clk)); |
| ret = PTR_ERR(info->clk); |
| goto err_irq; |
| } |
| |
| info->vdd = devm_regulator_get(&pdev->dev, "vdd"); |
| if (IS_ERR(info->vdd)) { |
| dev_err(&pdev->dev, "failed getting regulator, err = %ld\n", |
| PTR_ERR(info->vdd)); |
| ret = PTR_ERR(info->vdd); |
| goto err_irq; |
| } |
| |
| info->version = exynos_adc_get_version(pdev); |
| |
| platform_set_drvdata(pdev, indio_dev); |
| |
| indio_dev->name = dev_name(&pdev->dev); |
| indio_dev->dev.parent = &pdev->dev; |
| indio_dev->dev.of_node = pdev->dev.of_node; |
| indio_dev->info = &exynos_adc_iio_info; |
| indio_dev->modes = INDIO_DIRECT_MODE; |
| indio_dev->channels = exynos_adc_iio_channels; |
| |
| if (info->version == ADC_V1) |
| indio_dev->num_channels = MAX_ADC_V1_CHANNELS; |
| else |
| indio_dev->num_channels = MAX_ADC_V2_CHANNELS; |
| |
| ret = iio_device_register(indio_dev); |
| if (ret) |
| goto err_irq; |
| |
| ret = regulator_enable(info->vdd); |
| if (ret) |
| goto err_iio_dev; |
| |
| clk_prepare_enable(info->clk); |
| |
| exynos_adc_hw_init(info); |
| |
| ret = of_platform_populate(np, exynos_adc_match, NULL, &pdev->dev); |
| if (ret < 0) { |
| dev_err(&pdev->dev, "failed adding child nodes\n"); |
| goto err_of_populate; |
| } |
| |
| return 0; |
| |
| err_of_populate: |
| device_for_each_child(&pdev->dev, NULL, |
| exynos_adc_remove_devices); |
| regulator_disable(info->vdd); |
| clk_disable_unprepare(info->clk); |
| err_iio_dev: |
| iio_device_unregister(indio_dev); |
| err_irq: |
| free_irq(info->irq, info); |
| err_iio: |
| iio_device_free(indio_dev); |
| return ret; |
| } |
| |
| static int exynos_adc_remove(struct platform_device *pdev) |
| { |
| struct iio_dev *indio_dev = platform_get_drvdata(pdev); |
| struct exynos_adc *info = iio_priv(indio_dev); |
| |
| device_for_each_child(&pdev->dev, NULL, |
| exynos_adc_remove_devices); |
| regulator_disable(info->vdd); |
| clk_disable_unprepare(info->clk); |
| writel(0, info->enable_reg); |
| iio_device_unregister(indio_dev); |
| free_irq(info->irq, info); |
| iio_device_free(indio_dev); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int exynos_adc_suspend(struct device *dev) |
| { |
| struct iio_dev *indio_dev = dev_get_drvdata(dev); |
| struct exynos_adc *info = iio_priv(indio_dev); |
| u32 con; |
| |
| if (info->version == ADC_V2) { |
| con = readl(ADC_V2_CON1(info->regs)); |
| con &= ~ADC_CON_EN_START; |
| writel(con, ADC_V2_CON1(info->regs)); |
| } else { |
| con = readl(ADC_V1_CON(info->regs)); |
| con |= ADC_V1_CON_STANDBY; |
| writel(con, ADC_V1_CON(info->regs)); |
| } |
| |
| clk_disable_unprepare(info->clk); |
| writel(0, info->enable_reg); |
| regulator_disable(info->vdd); |
| |
| return 0; |
| } |
| |
| static int exynos_adc_resume(struct device *dev) |
| { |
| struct iio_dev *indio_dev = dev_get_drvdata(dev); |
| struct exynos_adc *info = iio_priv(indio_dev); |
| int ret; |
| |
| ret = regulator_enable(info->vdd); |
| if (ret) |
| return ret; |
| |
| writel(1, info->enable_reg); |
| clk_prepare_enable(info->clk); |
| |
| exynos_adc_hw_init(info); |
| |
| return 0; |
| } |
| #endif |
| |
| static SIMPLE_DEV_PM_OPS(exynos_adc_pm_ops, |
| exynos_adc_suspend, |
| exynos_adc_resume); |
| |
| static struct platform_driver exynos_adc_driver = { |
| .probe = exynos_adc_probe, |
| .remove = exynos_adc_remove, |
| .driver = { |
| .name = "exynos-adc", |
| .owner = THIS_MODULE, |
| .of_match_table = exynos_adc_match, |
| .pm = &exynos_adc_pm_ops, |
| }, |
| }; |
| |
| module_platform_driver(exynos_adc_driver); |
| |
| MODULE_AUTHOR("Naveen Krishna Chatradhi <ch.naveen@samsung.com>"); |
| MODULE_DESCRIPTION("Samsung EXYNOS5 ADC driver"); |
| MODULE_LICENSE("GPL v2"); |