| /* |
| * gpmc-nand.c |
| * |
| * Copyright (C) 2009 Texas Instruments |
| * Vimal Singh <vimalsingh@ti.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/platform_device.h> |
| #include <linux/io.h> |
| #include <linux/mtd/nand.h> |
| #include <linux/platform_data/mtd-nand-omap2.h> |
| |
| #include <asm/mach/flash.h> |
| |
| #include "gpmc.h" |
| #include "soc.h" |
| #include "gpmc-nand.h" |
| |
| /* minimum size for IO mapping */ |
| #define NAND_IO_SIZE 4 |
| |
| static struct resource gpmc_nand_resource[] = { |
| { |
| .flags = IORESOURCE_MEM, |
| }, |
| { |
| .flags = IORESOURCE_IRQ, |
| }, |
| { |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct platform_device gpmc_nand_device = { |
| .name = "omap2-nand", |
| .id = 0, |
| .num_resources = ARRAY_SIZE(gpmc_nand_resource), |
| .resource = gpmc_nand_resource, |
| }; |
| |
| static int omap2_nand_gpmc_retime( |
| struct omap_nand_platform_data *gpmc_nand_data, |
| struct gpmc_timings *gpmc_t) |
| { |
| struct gpmc_timings t; |
| int err; |
| |
| memset(&t, 0, sizeof(t)); |
| t.sync_clk = gpmc_t->sync_clk; |
| t.cs_on = gpmc_t->cs_on; |
| t.adv_on = gpmc_t->adv_on; |
| |
| /* Read */ |
| t.adv_rd_off = gpmc_t->adv_rd_off; |
| t.oe_on = t.adv_on; |
| t.access = gpmc_t->access; |
| t.oe_off = gpmc_t->oe_off; |
| t.cs_rd_off = gpmc_t->cs_rd_off; |
| t.rd_cycle = gpmc_t->rd_cycle; |
| |
| /* Write */ |
| t.adv_wr_off = gpmc_t->adv_wr_off; |
| t.we_on = t.oe_on; |
| if (cpu_is_omap34xx()) { |
| t.wr_data_mux_bus = gpmc_t->wr_data_mux_bus; |
| t.wr_access = gpmc_t->wr_access; |
| } |
| t.we_off = gpmc_t->we_off; |
| t.cs_wr_off = gpmc_t->cs_wr_off; |
| t.wr_cycle = gpmc_t->wr_cycle; |
| |
| err = gpmc_cs_set_timings(gpmc_nand_data->cs, &t); |
| if (err) |
| return err; |
| |
| return 0; |
| } |
| |
| static bool gpmc_hwecc_bch_capable(enum omap_ecc ecc_opt) |
| { |
| /* support only OMAP3 class */ |
| if (!cpu_is_omap34xx() && !soc_is_am33xx()) { |
| pr_err("BCH ecc is not supported on this CPU\n"); |
| return 0; |
| } |
| |
| /* |
| * For now, assume 4-bit mode is only supported on OMAP3630 ES1.x, x>=1 |
| * and AM33xx derivates. Other chips may be added if confirmed to work. |
| */ |
| if ((ecc_opt == OMAP_ECC_BCH4_CODE_HW) && |
| (!cpu_is_omap3630() || (GET_OMAP_REVISION() == 0)) && |
| (!soc_is_am33xx())) { |
| pr_err("BCH 4-bit mode is not supported on this CPU\n"); |
| return 0; |
| } |
| |
| return 1; |
| } |
| |
| int gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data, |
| struct gpmc_timings *gpmc_t) |
| { |
| int err = 0; |
| struct gpmc_settings s; |
| struct device *dev = &gpmc_nand_device.dev; |
| |
| memset(&s, 0, sizeof(struct gpmc_settings)); |
| |
| gpmc_nand_device.dev.platform_data = gpmc_nand_data; |
| |
| err = gpmc_cs_request(gpmc_nand_data->cs, NAND_IO_SIZE, |
| (unsigned long *)&gpmc_nand_resource[0].start); |
| if (err < 0) { |
| dev_err(dev, "Cannot request GPMC CS %d, error %d\n", |
| gpmc_nand_data->cs, err); |
| return err; |
| } |
| |
| gpmc_nand_resource[0].end = gpmc_nand_resource[0].start + |
| NAND_IO_SIZE - 1; |
| |
| gpmc_nand_resource[1].start = |
| gpmc_get_client_irq(GPMC_IRQ_FIFOEVENTENABLE); |
| gpmc_nand_resource[2].start = |
| gpmc_get_client_irq(GPMC_IRQ_COUNT_EVENT); |
| |
| if (gpmc_t) { |
| err = omap2_nand_gpmc_retime(gpmc_nand_data, gpmc_t); |
| if (err < 0) { |
| dev_err(dev, "Unable to set gpmc timings: %d\n", err); |
| return err; |
| } |
| |
| if (gpmc_nand_data->of_node) { |
| gpmc_read_settings_dt(gpmc_nand_data->of_node, &s); |
| } else { |
| s.device_nand = true; |
| |
| /* Enable RD PIN Monitoring Reg */ |
| if (gpmc_nand_data->dev_ready) { |
| s.wait_on_read = true; |
| s.wait_on_write = true; |
| } |
| } |
| |
| if (gpmc_nand_data->devsize == NAND_BUSWIDTH_16) |
| s.device_width = GPMC_DEVWIDTH_16BIT; |
| else |
| s.device_width = GPMC_DEVWIDTH_8BIT; |
| |
| err = gpmc_cs_program_settings(gpmc_nand_data->cs, &s); |
| if (err < 0) |
| goto out_free_cs; |
| |
| err = gpmc_configure(GPMC_CONFIG_WP, 0); |
| if (err < 0) |
| goto out_free_cs; |
| } |
| |
| gpmc_update_nand_reg(&gpmc_nand_data->reg, gpmc_nand_data->cs); |
| |
| if (!gpmc_hwecc_bch_capable(gpmc_nand_data->ecc_opt)) |
| return -EINVAL; |
| |
| err = platform_device_register(&gpmc_nand_device); |
| if (err < 0) { |
| dev_err(dev, "Unable to register NAND device\n"); |
| goto out_free_cs; |
| } |
| |
| return 0; |
| |
| out_free_cs: |
| gpmc_cs_free(gpmc_nand_data->cs); |
| |
| return err; |
| } |