| /* |
| * s2255drv.c - a driver for the Sensoray 2255 USB video capture device |
| * |
| * Copyright (C) 2007-2010 by Sensoray Company Inc. |
| * Dean Anderson |
| * |
| * Some video buffer code based on vivi driver: |
| * |
| * Sensoray 2255 device supports 4 simultaneous channels. |
| * The channels are not "crossbar" inputs, they are physically |
| * attached to separate video decoders. |
| * |
| * Because of USB2.0 bandwidth limitations. There is only a |
| * certain amount of data which may be transferred at one time. |
| * |
| * Example maximum bandwidth utilization: |
| * |
| * -full size, color mode YUYV or YUV422P: 2 channels at once |
| * -full or half size Grey scale: all 4 channels at once |
| * -half size, color mode YUYV or YUV422P: all 4 channels at once |
| * -full size, color mode YUYV or YUV422P 1/2 frame rate: all 4 channels |
| * at once. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/firmware.h> |
| #include <linux/kernel.h> |
| #include <linux/mutex.h> |
| #include <linux/slab.h> |
| #include <linux/videodev2.h> |
| #include <linux/mm.h> |
| #include <linux/vmalloc.h> |
| #include <linux/usb.h> |
| #include <media/videobuf-vmalloc.h> |
| #include <media/v4l2-common.h> |
| #include <media/v4l2-device.h> |
| #include <media/v4l2-ioctl.h> |
| #include <media/v4l2-ctrls.h> |
| #include <media/v4l2-event.h> |
| |
| #define S2255_VERSION "1.22.1" |
| #define FIRMWARE_FILE_NAME "f2255usb.bin" |
| |
| /* default JPEG quality */ |
| #define S2255_DEF_JPEG_QUAL 50 |
| /* vendor request in */ |
| #define S2255_VR_IN 0 |
| /* vendor request out */ |
| #define S2255_VR_OUT 1 |
| /* firmware query */ |
| #define S2255_VR_FW 0x30 |
| /* USB endpoint number for configuring the device */ |
| #define S2255_CONFIG_EP 2 |
| /* maximum time for DSP to start responding after last FW word loaded(ms) */ |
| #define S2255_DSP_BOOTTIME 800 |
| /* maximum time to wait for firmware to load (ms) */ |
| #define S2255_LOAD_TIMEOUT (5000 + S2255_DSP_BOOTTIME) |
| #define S2255_DEF_BUFS 16 |
| #define S2255_SETMODE_TIMEOUT 500 |
| #define S2255_VIDSTATUS_TIMEOUT 350 |
| #define S2255_MARKER_FRAME cpu_to_le32(0x2255DA4AL) |
| #define S2255_MARKER_RESPONSE cpu_to_le32(0x2255ACACL) |
| #define S2255_RESPONSE_SETMODE cpu_to_le32(0x01) |
| #define S2255_RESPONSE_FW cpu_to_le32(0x10) |
| #define S2255_RESPONSE_STATUS cpu_to_le32(0x20) |
| #define S2255_USB_XFER_SIZE (16 * 1024) |
| #define MAX_CHANNELS 4 |
| #define SYS_FRAMES 4 |
| /* maximum size is PAL full size plus room for the marker header(s) */ |
| #define SYS_FRAMES_MAXSIZE (720*288*2*2 + 4096) |
| #define DEF_USB_BLOCK S2255_USB_XFER_SIZE |
| #define LINE_SZ_4CIFS_NTSC 640 |
| #define LINE_SZ_2CIFS_NTSC 640 |
| #define LINE_SZ_1CIFS_NTSC 320 |
| #define LINE_SZ_4CIFS_PAL 704 |
| #define LINE_SZ_2CIFS_PAL 704 |
| #define LINE_SZ_1CIFS_PAL 352 |
| #define NUM_LINES_4CIFS_NTSC 240 |
| #define NUM_LINES_2CIFS_NTSC 240 |
| #define NUM_LINES_1CIFS_NTSC 240 |
| #define NUM_LINES_4CIFS_PAL 288 |
| #define NUM_LINES_2CIFS_PAL 288 |
| #define NUM_LINES_1CIFS_PAL 288 |
| #define LINE_SZ_DEF 640 |
| #define NUM_LINES_DEF 240 |
| |
| |
| /* predefined settings */ |
| #define FORMAT_NTSC 1 |
| #define FORMAT_PAL 2 |
| |
| #define SCALE_4CIFS 1 /* 640x480(NTSC) or 704x576(PAL) */ |
| #define SCALE_2CIFS 2 /* 640x240(NTSC) or 704x288(PAL) */ |
| #define SCALE_1CIFS 3 /* 320x240(NTSC) or 352x288(PAL) */ |
| /* SCALE_4CIFSI is the 2 fields interpolated into one */ |
| #define SCALE_4CIFSI 4 /* 640x480(NTSC) or 704x576(PAL) high quality */ |
| |
| #define COLOR_YUVPL 1 /* YUV planar */ |
| #define COLOR_YUVPK 2 /* YUV packed */ |
| #define COLOR_Y8 4 /* monochrome */ |
| #define COLOR_JPG 5 /* JPEG */ |
| |
| #define MASK_COLOR 0x000000ff |
| #define MASK_JPG_QUALITY 0x0000ff00 |
| #define MASK_INPUT_TYPE 0x000f0000 |
| /* frame decimation. */ |
| #define FDEC_1 1 /* capture every frame. default */ |
| #define FDEC_2 2 /* capture every 2nd frame */ |
| #define FDEC_3 3 /* capture every 3rd frame */ |
| #define FDEC_5 5 /* capture every 5th frame */ |
| |
| /*------------------------------------------------------- |
| * Default mode parameters. |
| *-------------------------------------------------------*/ |
| #define DEF_SCALE SCALE_4CIFS |
| #define DEF_COLOR COLOR_YUVPL |
| #define DEF_FDEC FDEC_1 |
| #define DEF_BRIGHT 0 |
| #define DEF_CONTRAST 0x5c |
| #define DEF_SATURATION 0x80 |
| #define DEF_HUE 0 |
| |
| /* usb config commands */ |
| #define IN_DATA_TOKEN cpu_to_le32(0x2255c0de) |
| #define CMD_2255 0xc2255000 |
| #define CMD_SET_MODE cpu_to_le32((CMD_2255 | 0x10)) |
| #define CMD_START cpu_to_le32((CMD_2255 | 0x20)) |
| #define CMD_STOP cpu_to_le32((CMD_2255 | 0x30)) |
| #define CMD_STATUS cpu_to_le32((CMD_2255 | 0x40)) |
| |
| struct s2255_mode { |
| u32 format; /* input video format (NTSC, PAL) */ |
| u32 scale; /* output video scale */ |
| u32 color; /* output video color format */ |
| u32 fdec; /* frame decimation */ |
| u32 bright; /* brightness */ |
| u32 contrast; /* contrast */ |
| u32 saturation; /* saturation */ |
| u32 hue; /* hue (NTSC only)*/ |
| u32 single; /* capture 1 frame at a time (!=0), continuously (==0)*/ |
| u32 usb_block; /* block size. should be 4096 of DEF_USB_BLOCK */ |
| u32 restart; /* if DSP requires restart */ |
| }; |
| |
| |
| #define S2255_READ_IDLE 0 |
| #define S2255_READ_FRAME 1 |
| |
| /* frame structure */ |
| struct s2255_framei { |
| unsigned long size; |
| unsigned long ulState; /* ulState:S2255_READ_IDLE, S2255_READ_FRAME*/ |
| void *lpvbits; /* image data */ |
| unsigned long cur_size; /* current data copied to it */ |
| }; |
| |
| /* image buffer structure */ |
| struct s2255_bufferi { |
| unsigned long dwFrames; /* number of frames in buffer */ |
| struct s2255_framei frame[SYS_FRAMES]; /* array of FRAME structures */ |
| }; |
| |
| #define DEF_MODEI_NTSC_CONT {FORMAT_NTSC, DEF_SCALE, DEF_COLOR, \ |
| DEF_FDEC, DEF_BRIGHT, DEF_CONTRAST, DEF_SATURATION, \ |
| DEF_HUE, 0, DEF_USB_BLOCK, 0} |
| |
| struct s2255_dmaqueue { |
| struct list_head active; |
| struct s2255_dev *dev; |
| }; |
| |
| /* for firmware loading, fw_state */ |
| #define S2255_FW_NOTLOADED 0 |
| #define S2255_FW_LOADED_DSPWAIT 1 |
| #define S2255_FW_SUCCESS 2 |
| #define S2255_FW_FAILED 3 |
| #define S2255_FW_DISCONNECTING 4 |
| #define S2255_FW_MARKER cpu_to_le32(0x22552f2f) |
| /* 2255 read states */ |
| #define S2255_READ_IDLE 0 |
| #define S2255_READ_FRAME 1 |
| struct s2255_fw { |
| int fw_loaded; |
| int fw_size; |
| struct urb *fw_urb; |
| atomic_t fw_state; |
| void *pfw_data; |
| wait_queue_head_t wait_fw; |
| const struct firmware *fw; |
| }; |
| |
| struct s2255_pipeinfo { |
| u32 max_transfer_size; |
| u32 cur_transfer_size; |
| u8 *transfer_buffer; |
| u32 state; |
| void *stream_urb; |
| void *dev; /* back pointer to s2255_dev struct*/ |
| u32 err_count; |
| u32 idx; |
| }; |
| |
| struct s2255_fmt; /*forward declaration */ |
| struct s2255_dev; |
| |
| struct s2255_channel { |
| struct video_device vdev; |
| struct v4l2_ctrl_handler hdl; |
| struct v4l2_ctrl *jpegqual_ctrl; |
| int resources; |
| struct s2255_dmaqueue vidq; |
| struct s2255_bufferi buffer; |
| struct s2255_mode mode; |
| v4l2_std_id std; |
| /* jpeg compression */ |
| unsigned jpegqual; |
| /* capture parameters (for high quality mode full size) */ |
| struct v4l2_captureparm cap_parm; |
| int cur_frame; |
| int last_frame; |
| |
| int b_acquire; |
| /* allocated image size */ |
| unsigned long req_image_size; |
| /* received packet size */ |
| unsigned long pkt_size; |
| int bad_payload; |
| unsigned long frame_count; |
| /* if JPEG image */ |
| int jpg_size; |
| /* if channel configured to default state */ |
| int configured; |
| wait_queue_head_t wait_setmode; |
| int setmode_ready; |
| /* video status items */ |
| int vidstatus; |
| wait_queue_head_t wait_vidstatus; |
| int vidstatus_ready; |
| unsigned int width; |
| unsigned int height; |
| const struct s2255_fmt *fmt; |
| int idx; /* channel number on device, 0-3 */ |
| }; |
| |
| |
| struct s2255_dev { |
| struct s2255_channel channel[MAX_CHANNELS]; |
| struct v4l2_device v4l2_dev; |
| atomic_t num_channels; |
| int frames; |
| struct mutex lock; /* channels[].vdev.lock */ |
| struct usb_device *udev; |
| struct usb_interface *interface; |
| u8 read_endpoint; |
| struct timer_list timer; |
| struct s2255_fw *fw_data; |
| struct s2255_pipeinfo pipe; |
| u32 cc; /* current channel */ |
| int frame_ready; |
| int chn_ready; |
| spinlock_t slock; |
| /* dsp firmware version (f2255usb.bin) */ |
| int dsp_fw_ver; |
| u16 pid; /* product id */ |
| }; |
| |
| static inline struct s2255_dev *to_s2255_dev(struct v4l2_device *v4l2_dev) |
| { |
| return container_of(v4l2_dev, struct s2255_dev, v4l2_dev); |
| } |
| |
| struct s2255_fmt { |
| char *name; |
| u32 fourcc; |
| int depth; |
| }; |
| |
| /* buffer for one video frame */ |
| struct s2255_buffer { |
| /* common v4l buffer stuff -- must be first */ |
| struct videobuf_buffer vb; |
| const struct s2255_fmt *fmt; |
| }; |
| |
| struct s2255_fh { |
| /* this must be the first field in this struct */ |
| struct v4l2_fh fh; |
| struct s2255_dev *dev; |
| struct videobuf_queue vb_vidq; |
| enum v4l2_buf_type type; |
| struct s2255_channel *channel; |
| int resources; |
| }; |
| |
| /* current cypress EEPROM firmware version */ |
| #define S2255_CUR_USB_FWVER ((3 << 8) | 12) |
| /* current DSP FW version */ |
| #define S2255_CUR_DSP_FWVER 10104 |
| /* Need DSP version 5+ for video status feature */ |
| #define S2255_MIN_DSP_STATUS 5 |
| #define S2255_MIN_DSP_COLORFILTER 8 |
| #define S2255_NORMS (V4L2_STD_ALL) |
| |
| /* private V4L2 controls */ |
| |
| /* |
| * The following chart displays how COLORFILTER should be set |
| * ========================================================= |
| * = fourcc = COLORFILTER = |
| * = =============================== |
| * = = 0 = 1 = |
| * ========================================================= |
| * = V4L2_PIX_FMT_GREY(Y8) = monochrome from = monochrome= |
| * = = s-video or = composite = |
| * = = B/W camera = input = |
| * ========================================================= |
| * = other = color, svideo = color, = |
| * = = = composite = |
| * ========================================================= |
| * |
| * Notes: |
| * channels 0-3 on 2255 are composite |
| * channels 0-1 on 2257 are composite, 2-3 are s-video |
| * If COLORFILTER is 0 with a composite color camera connected, |
| * the output will appear monochrome but hatching |
| * will occur. |
| * COLORFILTER is different from "color killer" and "color effects" |
| * for reasons above. |
| */ |
| #define S2255_V4L2_YC_ON 1 |
| #define S2255_V4L2_YC_OFF 0 |
| #define V4L2_CID_S2255_COLORFILTER (V4L2_CID_USER_S2255_BASE + 0) |
| |
| /* frame prefix size (sent once every frame) */ |
| #define PREFIX_SIZE 512 |
| |
| /* Channels on box are in reverse order */ |
| static unsigned long G_chnmap[MAX_CHANNELS] = {3, 2, 1, 0}; |
| |
| static int debug; |
| static int *s2255_debug = &debug; |
| |
| static int s2255_start_readpipe(struct s2255_dev *dev); |
| static void s2255_stop_readpipe(struct s2255_dev *dev); |
| static int s2255_start_acquire(struct s2255_channel *channel); |
| static int s2255_stop_acquire(struct s2255_channel *channel); |
| static void s2255_fillbuff(struct s2255_channel *chn, struct s2255_buffer *buf, |
| int jpgsize); |
| static int s2255_set_mode(struct s2255_channel *chan, struct s2255_mode *mode); |
| static int s2255_board_shutdown(struct s2255_dev *dev); |
| static void s2255_fwload_start(struct s2255_dev *dev, int reset); |
| static void s2255_destroy(struct s2255_dev *dev); |
| static long s2255_vendor_req(struct s2255_dev *dev, unsigned char req, |
| u16 index, u16 value, void *buf, |
| s32 buf_len, int bOut); |
| |
| /* dev_err macro with driver name */ |
| #define S2255_DRIVER_NAME "s2255" |
| #define s2255_dev_err(dev, fmt, arg...) \ |
| dev_err(dev, S2255_DRIVER_NAME " - " fmt, ##arg) |
| |
| #define dprintk(level, fmt, arg...) \ |
| do { \ |
| if (*s2255_debug >= (level)) { \ |
| printk(KERN_DEBUG S2255_DRIVER_NAME \ |
| ": " fmt, ##arg); \ |
| } \ |
| } while (0) |
| |
| static struct usb_driver s2255_driver; |
| |
| /* Declare static vars that will be used as parameters */ |
| static unsigned int vid_limit = 16; /* Video memory limit, in Mb */ |
| |
| /* start video number */ |
| static int video_nr = -1; /* /dev/videoN, -1 for autodetect */ |
| |
| /* Enable jpeg capture. */ |
| static int jpeg_enable = 1; |
| |
| module_param(debug, int, 0644); |
| MODULE_PARM_DESC(debug, "Debug level(0-100) default 0"); |
| module_param(vid_limit, int, 0644); |
| MODULE_PARM_DESC(vid_limit, "video memory limit(Mb)"); |
| module_param(video_nr, int, 0644); |
| MODULE_PARM_DESC(video_nr, "start video minor(-1 default autodetect)"); |
| module_param(jpeg_enable, int, 0644); |
| MODULE_PARM_DESC(jpeg_enable, "Jpeg enable(1-on 0-off) default 1"); |
| |
| /* USB device table */ |
| #define USB_SENSORAY_VID 0x1943 |
| static struct usb_device_id s2255_table[] = { |
| {USB_DEVICE(USB_SENSORAY_VID, 0x2255)}, |
| {USB_DEVICE(USB_SENSORAY_VID, 0x2257)}, /*same family as 2255*/ |
| { } /* Terminating entry */ |
| }; |
| MODULE_DEVICE_TABLE(usb, s2255_table); |
| |
| #define BUFFER_TIMEOUT msecs_to_jiffies(400) |
| |
| /* image formats. */ |
| /* JPEG formats must be defined last to support jpeg_enable parameter */ |
| static const struct s2255_fmt formats[] = { |
| { |
| .name = "4:2:2, packed, YUYV", |
| .fourcc = V4L2_PIX_FMT_YUYV, |
| .depth = 16 |
| |
| }, { |
| .name = "4:2:2, packed, UYVY", |
| .fourcc = V4L2_PIX_FMT_UYVY, |
| .depth = 16 |
| }, { |
| .name = "4:2:2, planar, YUV422P", |
| .fourcc = V4L2_PIX_FMT_YUV422P, |
| .depth = 16 |
| |
| }, { |
| .name = "8bpp GREY", |
| .fourcc = V4L2_PIX_FMT_GREY, |
| .depth = 8 |
| }, { |
| .name = "JPG", |
| .fourcc = V4L2_PIX_FMT_JPEG, |
| .depth = 24 |
| }, { |
| .name = "MJPG", |
| .fourcc = V4L2_PIX_FMT_MJPEG, |
| .depth = 24 |
| } |
| }; |
| |
| static int norm_maxw(struct s2255_channel *channel) |
| { |
| return (channel->std & V4L2_STD_525_60) ? |
| LINE_SZ_4CIFS_NTSC : LINE_SZ_4CIFS_PAL; |
| } |
| |
| static int norm_maxh(struct s2255_channel *channel) |
| { |
| return (channel->std & V4L2_STD_525_60) ? |
| (NUM_LINES_1CIFS_NTSC * 2) : (NUM_LINES_1CIFS_PAL * 2); |
| } |
| |
| static int norm_minw(struct s2255_channel *channel) |
| { |
| return (channel->std & V4L2_STD_525_60) ? |
| LINE_SZ_1CIFS_NTSC : LINE_SZ_1CIFS_PAL; |
| } |
| |
| static int norm_minh(struct s2255_channel *channel) |
| { |
| return (channel->std & V4L2_STD_525_60) ? |
| (NUM_LINES_1CIFS_NTSC) : (NUM_LINES_1CIFS_PAL); |
| } |
| |
| |
| /* |
| * TODO: fixme: move YUV reordering to hardware |
| * converts 2255 planar format to yuyv or uyvy |
| */ |
| static void planar422p_to_yuv_packed(const unsigned char *in, |
| unsigned char *out, |
| int width, int height, |
| int fmt) |
| { |
| unsigned char *pY; |
| unsigned char *pCb; |
| unsigned char *pCr; |
| unsigned long size = height * width; |
| unsigned int i; |
| pY = (unsigned char *)in; |
| pCr = (unsigned char *)in + height * width; |
| pCb = (unsigned char *)in + height * width + (height * width / 2); |
| for (i = 0; i < size * 2; i += 4) { |
| out[i] = (fmt == V4L2_PIX_FMT_YUYV) ? *pY++ : *pCr++; |
| out[i + 1] = (fmt == V4L2_PIX_FMT_YUYV) ? *pCr++ : *pY++; |
| out[i + 2] = (fmt == V4L2_PIX_FMT_YUYV) ? *pY++ : *pCb++; |
| out[i + 3] = (fmt == V4L2_PIX_FMT_YUYV) ? *pCb++ : *pY++; |
| } |
| return; |
| } |
| |
| static void s2255_reset_dsppower(struct s2255_dev *dev) |
| { |
| s2255_vendor_req(dev, 0x40, 0x0000, 0x0001, NULL, 0, 1); |
| msleep(10); |
| s2255_vendor_req(dev, 0x50, 0x0000, 0x0000, NULL, 0, 1); |
| msleep(600); |
| s2255_vendor_req(dev, 0x10, 0x0000, 0x0000, NULL, 0, 1); |
| return; |
| } |
| |
| /* kickstarts the firmware loading. from probe |
| */ |
| static void s2255_timer(unsigned long user_data) |
| { |
| struct s2255_fw *data = (struct s2255_fw *)user_data; |
| dprintk(100, "%s\n", __func__); |
| if (usb_submit_urb(data->fw_urb, GFP_ATOMIC) < 0) { |
| printk(KERN_ERR "s2255: can't submit urb\n"); |
| atomic_set(&data->fw_state, S2255_FW_FAILED); |
| /* wake up anything waiting for the firmware */ |
| wake_up(&data->wait_fw); |
| return; |
| } |
| } |
| |
| |
| /* this loads the firmware asynchronously. |
| Originally this was done synchronously in probe. |
| But it is better to load it asynchronously here than block |
| inside the probe function. Blocking inside probe affects boot time. |
| FW loading is triggered by the timer in the probe function |
| */ |
| static void s2255_fwchunk_complete(struct urb *urb) |
| { |
| struct s2255_fw *data = urb->context; |
| struct usb_device *udev = urb->dev; |
| int len; |
| dprintk(100, "%s: udev %p urb %p", __func__, udev, urb); |
| if (urb->status) { |
| dev_err(&udev->dev, "URB failed with status %d\n", urb->status); |
| atomic_set(&data->fw_state, S2255_FW_FAILED); |
| /* wake up anything waiting for the firmware */ |
| wake_up(&data->wait_fw); |
| return; |
| } |
| if (data->fw_urb == NULL) { |
| s2255_dev_err(&udev->dev, "disconnected\n"); |
| atomic_set(&data->fw_state, S2255_FW_FAILED); |
| /* wake up anything waiting for the firmware */ |
| wake_up(&data->wait_fw); |
| return; |
| } |
| #define CHUNK_SIZE 512 |
| /* all USB transfers must be done with continuous kernel memory. |
| can't allocate more than 128k in current linux kernel, so |
| upload the firmware in chunks |
| */ |
| if (data->fw_loaded < data->fw_size) { |
| len = (data->fw_loaded + CHUNK_SIZE) > data->fw_size ? |
| data->fw_size % CHUNK_SIZE : CHUNK_SIZE; |
| |
| if (len < CHUNK_SIZE) |
| memset(data->pfw_data, 0, CHUNK_SIZE); |
| |
| dprintk(100, "completed len %d, loaded %d \n", len, |
| data->fw_loaded); |
| |
| memcpy(data->pfw_data, |
| (char *) data->fw->data + data->fw_loaded, len); |
| |
| usb_fill_bulk_urb(data->fw_urb, udev, usb_sndbulkpipe(udev, 2), |
| data->pfw_data, CHUNK_SIZE, |
| s2255_fwchunk_complete, data); |
| if (usb_submit_urb(data->fw_urb, GFP_ATOMIC) < 0) { |
| dev_err(&udev->dev, "failed submit URB\n"); |
| atomic_set(&data->fw_state, S2255_FW_FAILED); |
| /* wake up anything waiting for the firmware */ |
| wake_up(&data->wait_fw); |
| return; |
| } |
| data->fw_loaded += len; |
| } else { |
| atomic_set(&data->fw_state, S2255_FW_LOADED_DSPWAIT); |
| dprintk(100, "%s: firmware upload complete\n", __func__); |
| } |
| return; |
| |
| } |
| |
| static int s2255_got_frame(struct s2255_channel *channel, int jpgsize) |
| { |
| struct s2255_dmaqueue *dma_q = &channel->vidq; |
| struct s2255_buffer *buf; |
| struct s2255_dev *dev = to_s2255_dev(channel->vdev.v4l2_dev); |
| unsigned long flags = 0; |
| int rc = 0; |
| spin_lock_irqsave(&dev->slock, flags); |
| if (list_empty(&dma_q->active)) { |
| dprintk(1, "No active queue to serve\n"); |
| rc = -1; |
| goto unlock; |
| } |
| buf = list_entry(dma_q->active.next, |
| struct s2255_buffer, vb.queue); |
| list_del(&buf->vb.queue); |
| v4l2_get_timestamp(&buf->vb.ts); |
| s2255_fillbuff(channel, buf, jpgsize); |
| wake_up(&buf->vb.done); |
| dprintk(2, "%s: [buf/i] [%p/%d]\n", __func__, buf, buf->vb.i); |
| unlock: |
| spin_unlock_irqrestore(&dev->slock, flags); |
| return rc; |
| } |
| |
| static const struct s2255_fmt *format_by_fourcc(int fourcc) |
| { |
| unsigned int i; |
| for (i = 0; i < ARRAY_SIZE(formats); i++) { |
| if (-1 == formats[i].fourcc) |
| continue; |
| if (!jpeg_enable && ((formats[i].fourcc == V4L2_PIX_FMT_JPEG) || |
| (formats[i].fourcc == V4L2_PIX_FMT_MJPEG))) |
| continue; |
| if (formats[i].fourcc == fourcc) |
| return formats + i; |
| } |
| return NULL; |
| } |
| |
| /* video buffer vmalloc implementation based partly on VIVI driver which is |
| * Copyright (c) 2006 by |
| * Mauro Carvalho Chehab <mchehab--a.t--infradead.org> |
| * Ted Walther <ted--a.t--enumera.com> |
| * John Sokol <sokol--a.t--videotechnology.com> |
| * http://v4l.videotechnology.com/ |
| * |
| */ |
| static void s2255_fillbuff(struct s2255_channel *channel, |
| struct s2255_buffer *buf, int jpgsize) |
| { |
| int pos = 0; |
| const char *tmpbuf; |
| char *vbuf = videobuf_to_vmalloc(&buf->vb); |
| unsigned long last_frame; |
| |
| if (!vbuf) |
| return; |
| last_frame = channel->last_frame; |
| if (last_frame != -1) { |
| tmpbuf = |
| (const char *)channel->buffer.frame[last_frame].lpvbits; |
| switch (buf->fmt->fourcc) { |
| case V4L2_PIX_FMT_YUYV: |
| case V4L2_PIX_FMT_UYVY: |
| planar422p_to_yuv_packed((const unsigned char *)tmpbuf, |
| vbuf, buf->vb.width, |
| buf->vb.height, |
| buf->fmt->fourcc); |
| break; |
| case V4L2_PIX_FMT_GREY: |
| memcpy(vbuf, tmpbuf, buf->vb.width * buf->vb.height); |
| break; |
| case V4L2_PIX_FMT_JPEG: |
| case V4L2_PIX_FMT_MJPEG: |
| buf->vb.size = jpgsize; |
| memcpy(vbuf, tmpbuf, buf->vb.size); |
| break; |
| case V4L2_PIX_FMT_YUV422P: |
| memcpy(vbuf, tmpbuf, |
| buf->vb.width * buf->vb.height * 2); |
| break; |
| default: |
| printk(KERN_DEBUG "s2255: unknown format?\n"); |
| } |
| channel->last_frame = -1; |
| } else { |
| printk(KERN_ERR "s2255: =======no frame\n"); |
| return; |
| |
| } |
| dprintk(2, "s2255fill at : Buffer 0x%08lx size= %d\n", |
| (unsigned long)vbuf, pos); |
| /* tell v4l buffer was filled */ |
| |
| buf->vb.field_count = channel->frame_count * 2; |
| v4l2_get_timestamp(&buf->vb.ts); |
| buf->vb.state = VIDEOBUF_DONE; |
| } |
| |
| |
| /* ------------------------------------------------------------------ |
| Videobuf operations |
| ------------------------------------------------------------------*/ |
| |
| static int buffer_setup(struct videobuf_queue *vq, unsigned int *count, |
| unsigned int *size) |
| { |
| struct s2255_fh *fh = vq->priv_data; |
| struct s2255_channel *channel = fh->channel; |
| *size = channel->width * channel->height * (channel->fmt->depth >> 3); |
| |
| if (0 == *count) |
| *count = S2255_DEF_BUFS; |
| |
| if (*size * *count > vid_limit * 1024 * 1024) |
| *count = (vid_limit * 1024 * 1024) / *size; |
| |
| return 0; |
| } |
| |
| static void free_buffer(struct videobuf_queue *vq, struct s2255_buffer *buf) |
| { |
| dprintk(4, "%s\n", __func__); |
| |
| videobuf_vmalloc_free(&buf->vb); |
| buf->vb.state = VIDEOBUF_NEEDS_INIT; |
| } |
| |
| static int buffer_prepare(struct videobuf_queue *vq, struct videobuf_buffer *vb, |
| enum v4l2_field field) |
| { |
| struct s2255_fh *fh = vq->priv_data; |
| struct s2255_channel *channel = fh->channel; |
| struct s2255_buffer *buf = container_of(vb, struct s2255_buffer, vb); |
| int rc; |
| int w = channel->width; |
| int h = channel->height; |
| dprintk(4, "%s, field=%d\n", __func__, field); |
| if (channel->fmt == NULL) |
| return -EINVAL; |
| |
| if ((w < norm_minw(channel)) || |
| (w > norm_maxw(channel)) || |
| (h < norm_minh(channel)) || |
| (h > norm_maxh(channel))) { |
| dprintk(4, "invalid buffer prepare\n"); |
| return -EINVAL; |
| } |
| buf->vb.size = w * h * (channel->fmt->depth >> 3); |
| if (0 != buf->vb.baddr && buf->vb.bsize < buf->vb.size) { |
| dprintk(4, "invalid buffer prepare\n"); |
| return -EINVAL; |
| } |
| |
| buf->fmt = channel->fmt; |
| buf->vb.width = w; |
| buf->vb.height = h; |
| buf->vb.field = field; |
| |
| if (VIDEOBUF_NEEDS_INIT == buf->vb.state) { |
| rc = videobuf_iolock(vq, &buf->vb, NULL); |
| if (rc < 0) |
| goto fail; |
| } |
| |
| buf->vb.state = VIDEOBUF_PREPARED; |
| return 0; |
| fail: |
| free_buffer(vq, buf); |
| return rc; |
| } |
| |
| static void buffer_queue(struct videobuf_queue *vq, struct videobuf_buffer *vb) |
| { |
| struct s2255_buffer *buf = container_of(vb, struct s2255_buffer, vb); |
| struct s2255_fh *fh = vq->priv_data; |
| struct s2255_channel *channel = fh->channel; |
| struct s2255_dmaqueue *vidq = &channel->vidq; |
| dprintk(1, "%s\n", __func__); |
| buf->vb.state = VIDEOBUF_QUEUED; |
| list_add_tail(&buf->vb.queue, &vidq->active); |
| } |
| |
| static void buffer_release(struct videobuf_queue *vq, |
| struct videobuf_buffer *vb) |
| { |
| struct s2255_buffer *buf = container_of(vb, struct s2255_buffer, vb); |
| struct s2255_fh *fh = vq->priv_data; |
| dprintk(4, "%s %d\n", __func__, fh->channel->idx); |
| free_buffer(vq, buf); |
| } |
| |
| static struct videobuf_queue_ops s2255_video_qops = { |
| .buf_setup = buffer_setup, |
| .buf_prepare = buffer_prepare, |
| .buf_queue = buffer_queue, |
| .buf_release = buffer_release, |
| }; |
| |
| |
| static int res_get(struct s2255_fh *fh) |
| { |
| struct s2255_channel *channel = fh->channel; |
| /* is it free? */ |
| if (channel->resources) |
| return 0; /* no, someone else uses it */ |
| /* it's free, grab it */ |
| channel->resources = 1; |
| fh->resources = 1; |
| dprintk(1, "s2255: res: get\n"); |
| return 1; |
| } |
| |
| static int res_locked(struct s2255_fh *fh) |
| { |
| return fh->channel->resources; |
| } |
| |
| static int res_check(struct s2255_fh *fh) |
| { |
| return fh->resources; |
| } |
| |
| |
| static void res_free(struct s2255_fh *fh) |
| { |
| struct s2255_channel *channel = fh->channel; |
| channel->resources = 0; |
| fh->resources = 0; |
| dprintk(1, "res: put\n"); |
| } |
| |
| static int vidioc_querycap(struct file *file, void *priv, |
| struct v4l2_capability *cap) |
| { |
| struct s2255_fh *fh = file->private_data; |
| struct s2255_dev *dev = fh->dev; |
| |
| strlcpy(cap->driver, "s2255", sizeof(cap->driver)); |
| strlcpy(cap->card, "s2255", sizeof(cap->card)); |
| usb_make_path(dev->udev, cap->bus_info, sizeof(cap->bus_info)); |
| cap->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; |
| cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS; |
| return 0; |
| } |
| |
| static int vidioc_enum_fmt_vid_cap(struct file *file, void *priv, |
| struct v4l2_fmtdesc *f) |
| { |
| int index = f->index; |
| |
| if (index >= ARRAY_SIZE(formats)) |
| return -EINVAL; |
| if (!jpeg_enable && ((formats[index].fourcc == V4L2_PIX_FMT_JPEG) || |
| (formats[index].fourcc == V4L2_PIX_FMT_MJPEG))) |
| return -EINVAL; |
| dprintk(4, "name %s\n", formats[index].name); |
| strlcpy(f->description, formats[index].name, sizeof(f->description)); |
| f->pixelformat = formats[index].fourcc; |
| return 0; |
| } |
| |
| static int vidioc_g_fmt_vid_cap(struct file *file, void *priv, |
| struct v4l2_format *f) |
| { |
| struct s2255_fh *fh = priv; |
| struct s2255_channel *channel = fh->channel; |
| int is_ntsc = channel->std & V4L2_STD_525_60; |
| |
| f->fmt.pix.width = channel->width; |
| f->fmt.pix.height = channel->height; |
| if (f->fmt.pix.height >= |
| (is_ntsc ? NUM_LINES_1CIFS_NTSC : NUM_LINES_1CIFS_PAL) * 2) |
| f->fmt.pix.field = V4L2_FIELD_INTERLACED; |
| else |
| f->fmt.pix.field = V4L2_FIELD_TOP; |
| f->fmt.pix.pixelformat = channel->fmt->fourcc; |
| f->fmt.pix.bytesperline = f->fmt.pix.width * (channel->fmt->depth >> 3); |
| f->fmt.pix.sizeimage = f->fmt.pix.height * f->fmt.pix.bytesperline; |
| f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M; |
| f->fmt.pix.priv = 0; |
| return 0; |
| } |
| |
| static int vidioc_try_fmt_vid_cap(struct file *file, void *priv, |
| struct v4l2_format *f) |
| { |
| const struct s2255_fmt *fmt; |
| enum v4l2_field field; |
| struct s2255_fh *fh = priv; |
| struct s2255_channel *channel = fh->channel; |
| int is_ntsc = channel->std & V4L2_STD_525_60; |
| |
| fmt = format_by_fourcc(f->fmt.pix.pixelformat); |
| |
| if (fmt == NULL) |
| return -EINVAL; |
| |
| field = f->fmt.pix.field; |
| |
| dprintk(50, "%s NTSC: %d suggested width: %d, height: %d\n", |
| __func__, is_ntsc, f->fmt.pix.width, f->fmt.pix.height); |
| if (is_ntsc) { |
| /* NTSC */ |
| if (f->fmt.pix.height >= NUM_LINES_1CIFS_NTSC * 2) { |
| f->fmt.pix.height = NUM_LINES_1CIFS_NTSC * 2; |
| field = V4L2_FIELD_INTERLACED; |
| } else { |
| f->fmt.pix.height = NUM_LINES_1CIFS_NTSC; |
| field = V4L2_FIELD_TOP; |
| } |
| if (f->fmt.pix.width >= LINE_SZ_4CIFS_NTSC) |
| f->fmt.pix.width = LINE_SZ_4CIFS_NTSC; |
| else if (f->fmt.pix.width >= LINE_SZ_2CIFS_NTSC) |
| f->fmt.pix.width = LINE_SZ_2CIFS_NTSC; |
| else if (f->fmt.pix.width >= LINE_SZ_1CIFS_NTSC) |
| f->fmt.pix.width = LINE_SZ_1CIFS_NTSC; |
| else |
| f->fmt.pix.width = LINE_SZ_1CIFS_NTSC; |
| } else { |
| /* PAL */ |
| if (f->fmt.pix.height >= NUM_LINES_1CIFS_PAL * 2) { |
| f->fmt.pix.height = NUM_LINES_1CIFS_PAL * 2; |
| field = V4L2_FIELD_INTERLACED; |
| } else { |
| f->fmt.pix.height = NUM_LINES_1CIFS_PAL; |
| field = V4L2_FIELD_TOP; |
| } |
| if (f->fmt.pix.width >= LINE_SZ_4CIFS_PAL) |
| f->fmt.pix.width = LINE_SZ_4CIFS_PAL; |
| else if (f->fmt.pix.width >= LINE_SZ_2CIFS_PAL) |
| f->fmt.pix.width = LINE_SZ_2CIFS_PAL; |
| else if (f->fmt.pix.width >= LINE_SZ_1CIFS_PAL) |
| f->fmt.pix.width = LINE_SZ_1CIFS_PAL; |
| else |
| f->fmt.pix.width = LINE_SZ_1CIFS_PAL; |
| } |
| f->fmt.pix.field = field; |
| f->fmt.pix.bytesperline = (f->fmt.pix.width * fmt->depth) >> 3; |
| f->fmt.pix.sizeimage = f->fmt.pix.height * f->fmt.pix.bytesperline; |
| f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M; |
| f->fmt.pix.priv = 0; |
| dprintk(50, "%s: set width %d height %d field %d\n", __func__, |
| f->fmt.pix.width, f->fmt.pix.height, f->fmt.pix.field); |
| return 0; |
| } |
| |
| static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, |
| struct v4l2_format *f) |
| { |
| struct s2255_fh *fh = priv; |
| struct s2255_channel *channel = fh->channel; |
| const struct s2255_fmt *fmt; |
| struct videobuf_queue *q = &fh->vb_vidq; |
| struct s2255_mode mode; |
| int ret; |
| |
| ret = vidioc_try_fmt_vid_cap(file, fh, f); |
| |
| if (ret < 0) |
| return ret; |
| |
| fmt = format_by_fourcc(f->fmt.pix.pixelformat); |
| |
| if (fmt == NULL) |
| return -EINVAL; |
| |
| mutex_lock(&q->vb_lock); |
| |
| if (videobuf_queue_is_busy(&fh->vb_vidq)) { |
| dprintk(1, "queue busy\n"); |
| ret = -EBUSY; |
| goto out_s_fmt; |
| } |
| |
| if (res_locked(fh)) { |
| dprintk(1, "%s: channel busy\n", __func__); |
| ret = -EBUSY; |
| goto out_s_fmt; |
| } |
| mode = channel->mode; |
| channel->fmt = fmt; |
| channel->width = f->fmt.pix.width; |
| channel->height = f->fmt.pix.height; |
| fh->vb_vidq.field = f->fmt.pix.field; |
| fh->type = f->type; |
| if (channel->width > norm_minw(channel)) { |
| if (channel->height > norm_minh(channel)) { |
| if (channel->cap_parm.capturemode & |
| V4L2_MODE_HIGHQUALITY) |
| mode.scale = SCALE_4CIFSI; |
| else |
| mode.scale = SCALE_4CIFS; |
| } else |
| mode.scale = SCALE_2CIFS; |
| |
| } else { |
| mode.scale = SCALE_1CIFS; |
| } |
| /* color mode */ |
| switch (channel->fmt->fourcc) { |
| case V4L2_PIX_FMT_GREY: |
| mode.color &= ~MASK_COLOR; |
| mode.color |= COLOR_Y8; |
| break; |
| case V4L2_PIX_FMT_JPEG: |
| case V4L2_PIX_FMT_MJPEG: |
| mode.color &= ~MASK_COLOR; |
| mode.color |= COLOR_JPG; |
| mode.color |= (channel->jpegqual << 8); |
| break; |
| case V4L2_PIX_FMT_YUV422P: |
| mode.color &= ~MASK_COLOR; |
| mode.color |= COLOR_YUVPL; |
| break; |
| case V4L2_PIX_FMT_YUYV: |
| case V4L2_PIX_FMT_UYVY: |
| default: |
| mode.color &= ~MASK_COLOR; |
| mode.color |= COLOR_YUVPK; |
| break; |
| } |
| if ((mode.color & MASK_COLOR) != (channel->mode.color & MASK_COLOR)) |
| mode.restart = 1; |
| else if (mode.scale != channel->mode.scale) |
| mode.restart = 1; |
| else if (mode.format != channel->mode.format) |
| mode.restart = 1; |
| channel->mode = mode; |
| (void) s2255_set_mode(channel, &mode); |
| ret = 0; |
| out_s_fmt: |
| mutex_unlock(&q->vb_lock); |
| return ret; |
| } |
| |
| static int vidioc_reqbufs(struct file *file, void *priv, |
| struct v4l2_requestbuffers *p) |
| { |
| int rc; |
| struct s2255_fh *fh = priv; |
| rc = videobuf_reqbufs(&fh->vb_vidq, p); |
| return rc; |
| } |
| |
| static int vidioc_querybuf(struct file *file, void *priv, struct v4l2_buffer *p) |
| { |
| int rc; |
| struct s2255_fh *fh = priv; |
| rc = videobuf_querybuf(&fh->vb_vidq, p); |
| return rc; |
| } |
| |
| static int vidioc_qbuf(struct file *file, void *priv, struct v4l2_buffer *p) |
| { |
| int rc; |
| struct s2255_fh *fh = priv; |
| rc = videobuf_qbuf(&fh->vb_vidq, p); |
| return rc; |
| } |
| |
| static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *p) |
| { |
| int rc; |
| struct s2255_fh *fh = priv; |
| rc = videobuf_dqbuf(&fh->vb_vidq, p, file->f_flags & O_NONBLOCK); |
| return rc; |
| } |
| |
| /* write to the configuration pipe, synchronously */ |
| static int s2255_write_config(struct usb_device *udev, unsigned char *pbuf, |
| int size) |
| { |
| int pipe; |
| int done; |
| long retval = -1; |
| if (udev) { |
| pipe = usb_sndbulkpipe(udev, S2255_CONFIG_EP); |
| retval = usb_bulk_msg(udev, pipe, pbuf, size, &done, 500); |
| } |
| return retval; |
| } |
| |
| static u32 get_transfer_size(struct s2255_mode *mode) |
| { |
| int linesPerFrame = LINE_SZ_DEF; |
| int pixelsPerLine = NUM_LINES_DEF; |
| u32 outImageSize; |
| u32 usbInSize; |
| unsigned int mask_mult; |
| |
| if (mode == NULL) |
| return 0; |
| |
| if (mode->format == FORMAT_NTSC) { |
| switch (mode->scale) { |
| case SCALE_4CIFS: |
| case SCALE_4CIFSI: |
| linesPerFrame = NUM_LINES_4CIFS_NTSC * 2; |
| pixelsPerLine = LINE_SZ_4CIFS_NTSC; |
| break; |
| case SCALE_2CIFS: |
| linesPerFrame = NUM_LINES_2CIFS_NTSC; |
| pixelsPerLine = LINE_SZ_2CIFS_NTSC; |
| break; |
| case SCALE_1CIFS: |
| linesPerFrame = NUM_LINES_1CIFS_NTSC; |
| pixelsPerLine = LINE_SZ_1CIFS_NTSC; |
| break; |
| default: |
| break; |
| } |
| } else if (mode->format == FORMAT_PAL) { |
| switch (mode->scale) { |
| case SCALE_4CIFS: |
| case SCALE_4CIFSI: |
| linesPerFrame = NUM_LINES_4CIFS_PAL * 2; |
| pixelsPerLine = LINE_SZ_4CIFS_PAL; |
| break; |
| case SCALE_2CIFS: |
| linesPerFrame = NUM_LINES_2CIFS_PAL; |
| pixelsPerLine = LINE_SZ_2CIFS_PAL; |
| break; |
| case SCALE_1CIFS: |
| linesPerFrame = NUM_LINES_1CIFS_PAL; |
| pixelsPerLine = LINE_SZ_1CIFS_PAL; |
| break; |
| default: |
| break; |
| } |
| } |
| outImageSize = linesPerFrame * pixelsPerLine; |
| if ((mode->color & MASK_COLOR) != COLOR_Y8) { |
| /* 2 bytes/pixel if not monochrome */ |
| outImageSize *= 2; |
| } |
| |
| /* total bytes to send including prefix and 4K padding; |
| must be a multiple of USB_READ_SIZE */ |
| usbInSize = outImageSize + PREFIX_SIZE; /* always send prefix */ |
| mask_mult = 0xffffffffUL - DEF_USB_BLOCK + 1; |
| /* if size not a multiple of USB_READ_SIZE */ |
| if (usbInSize & ~mask_mult) |
| usbInSize = (usbInSize & mask_mult) + (DEF_USB_BLOCK); |
| return usbInSize; |
| } |
| |
| static void s2255_print_cfg(struct s2255_dev *sdev, struct s2255_mode *mode) |
| { |
| struct device *dev = &sdev->udev->dev; |
| dev_info(dev, "------------------------------------------------\n"); |
| dev_info(dev, "format: %d\nscale %d\n", mode->format, mode->scale); |
| dev_info(dev, "fdec: %d\ncolor %d\n", mode->fdec, mode->color); |
| dev_info(dev, "bright: 0x%x\n", mode->bright); |
| dev_info(dev, "------------------------------------------------\n"); |
| } |
| |
| /* |
| * set mode is the function which controls the DSP. |
| * the restart parameter in struct s2255_mode should be set whenever |
| * the image size could change via color format, video system or image |
| * size. |
| * When the restart parameter is set, we sleep for ONE frame to allow the |
| * DSP time to get the new frame |
| */ |
| static int s2255_set_mode(struct s2255_channel *channel, |
| struct s2255_mode *mode) |
| { |
| int res; |
| __le32 *buffer; |
| unsigned long chn_rev; |
| struct s2255_dev *dev = to_s2255_dev(channel->vdev.v4l2_dev); |
| int i; |
| |
| chn_rev = G_chnmap[channel->idx]; |
| dprintk(3, "%s channel: %d\n", __func__, channel->idx); |
| /* if JPEG, set the quality */ |
| if ((mode->color & MASK_COLOR) == COLOR_JPG) { |
| mode->color &= ~MASK_COLOR; |
| mode->color |= COLOR_JPG; |
| mode->color &= ~MASK_JPG_QUALITY; |
| mode->color |= (channel->jpegqual << 8); |
| } |
| /* save the mode */ |
| channel->mode = *mode; |
| channel->req_image_size = get_transfer_size(mode); |
| dprintk(1, "%s: reqsize %ld\n", __func__, channel->req_image_size); |
| buffer = kzalloc(512, GFP_KERNEL); |
| if (buffer == NULL) { |
| dev_err(&dev->udev->dev, "out of mem\n"); |
| return -ENOMEM; |
| } |
| /* set the mode */ |
| buffer[0] = IN_DATA_TOKEN; |
| buffer[1] = (__le32) cpu_to_le32(chn_rev); |
| buffer[2] = CMD_SET_MODE; |
| for (i = 0; i < sizeof(struct s2255_mode) / sizeof(u32); i++) |
| buffer[3 + i] = cpu_to_le32(((u32 *)&channel->mode)[i]); |
| channel->setmode_ready = 0; |
| res = s2255_write_config(dev->udev, (unsigned char *)buffer, 512); |
| if (debug) |
| s2255_print_cfg(dev, mode); |
| kfree(buffer); |
| /* wait at least 3 frames before continuing */ |
| if (mode->restart) { |
| wait_event_timeout(channel->wait_setmode, |
| (channel->setmode_ready != 0), |
| msecs_to_jiffies(S2255_SETMODE_TIMEOUT)); |
| if (channel->setmode_ready != 1) { |
| printk(KERN_DEBUG "s2255: no set mode response\n"); |
| res = -EFAULT; |
| } |
| } |
| /* clear the restart flag */ |
| channel->mode.restart = 0; |
| dprintk(1, "%s chn %d, result: %d\n", __func__, channel->idx, res); |
| return res; |
| } |
| |
| static int s2255_cmd_status(struct s2255_channel *channel, u32 *pstatus) |
| { |
| int res; |
| __le32 *buffer; |
| u32 chn_rev; |
| struct s2255_dev *dev = to_s2255_dev(channel->vdev.v4l2_dev); |
| chn_rev = G_chnmap[channel->idx]; |
| dprintk(4, "%s chan %d\n", __func__, channel->idx); |
| buffer = kzalloc(512, GFP_KERNEL); |
| if (buffer == NULL) { |
| dev_err(&dev->udev->dev, "out of mem\n"); |
| return -ENOMEM; |
| } |
| /* form the get vid status command */ |
| buffer[0] = IN_DATA_TOKEN; |
| buffer[1] = (__le32) cpu_to_le32(chn_rev); |
| buffer[2] = CMD_STATUS; |
| *pstatus = 0; |
| channel->vidstatus_ready = 0; |
| res = s2255_write_config(dev->udev, (unsigned char *)buffer, 512); |
| kfree(buffer); |
| wait_event_timeout(channel->wait_vidstatus, |
| (channel->vidstatus_ready != 0), |
| msecs_to_jiffies(S2255_VIDSTATUS_TIMEOUT)); |
| if (channel->vidstatus_ready != 1) { |
| printk(KERN_DEBUG "s2255: no vidstatus response\n"); |
| res = -EFAULT; |
| } |
| *pstatus = channel->vidstatus; |
| dprintk(4, "%s, vid status %d\n", __func__, *pstatus); |
| return res; |
| } |
| |
| static int vidioc_streamon(struct file *file, void *priv, enum v4l2_buf_type i) |
| { |
| int res; |
| struct s2255_fh *fh = priv; |
| struct s2255_dev *dev = fh->dev; |
| struct s2255_channel *channel = fh->channel; |
| int j; |
| dprintk(4, "%s\n", __func__); |
| if (fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) { |
| dev_err(&dev->udev->dev, "invalid fh type0\n"); |
| return -EINVAL; |
| } |
| if (i != fh->type) { |
| dev_err(&dev->udev->dev, "invalid fh type1\n"); |
| return -EINVAL; |
| } |
| |
| if (!res_get(fh)) { |
| s2255_dev_err(&dev->udev->dev, "stream busy\n"); |
| return -EBUSY; |
| } |
| channel->last_frame = -1; |
| channel->bad_payload = 0; |
| channel->cur_frame = 0; |
| channel->frame_count = 0; |
| for (j = 0; j < SYS_FRAMES; j++) { |
| channel->buffer.frame[j].ulState = S2255_READ_IDLE; |
| channel->buffer.frame[j].cur_size = 0; |
| } |
| res = videobuf_streamon(&fh->vb_vidq); |
| if (res == 0) { |
| s2255_start_acquire(channel); |
| channel->b_acquire = 1; |
| } else |
| res_free(fh); |
| |
| return res; |
| } |
| |
| static int vidioc_streamoff(struct file *file, void *priv, enum v4l2_buf_type i) |
| { |
| struct s2255_fh *fh = priv; |
| dprintk(4, "%s\n, channel: %d", __func__, fh->channel->idx); |
| if (fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) { |
| printk(KERN_ERR "invalid fh type0\n"); |
| return -EINVAL; |
| } |
| if (i != fh->type) { |
| printk(KERN_ERR "invalid type i\n"); |
| return -EINVAL; |
| } |
| s2255_stop_acquire(fh->channel); |
| videobuf_streamoff(&fh->vb_vidq); |
| res_free(fh); |
| return 0; |
| } |
| |
| static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id i) |
| { |
| struct s2255_fh *fh = priv; |
| struct s2255_mode mode; |
| struct videobuf_queue *q = &fh->vb_vidq; |
| struct s2255_channel *channel = fh->channel; |
| int ret = 0; |
| |
| mutex_lock(&q->vb_lock); |
| if (videobuf_queue_is_busy(q)) { |
| dprintk(1, "queue busy\n"); |
| ret = -EBUSY; |
| goto out_s_std; |
| } |
| if (res_locked(fh)) { |
| dprintk(1, "can't change standard after started\n"); |
| ret = -EBUSY; |
| goto out_s_std; |
| } |
| mode = fh->channel->mode; |
| if (i & V4L2_STD_525_60) { |
| dprintk(4, "%s 60 Hz\n", __func__); |
| /* if changing format, reset frame decimation/intervals */ |
| if (mode.format != FORMAT_NTSC) { |
| mode.restart = 1; |
| mode.format = FORMAT_NTSC; |
| mode.fdec = FDEC_1; |
| channel->width = LINE_SZ_4CIFS_NTSC; |
| channel->height = NUM_LINES_4CIFS_NTSC * 2; |
| } |
| } else if (i & V4L2_STD_625_50) { |
| dprintk(4, "%s 50 Hz\n", __func__); |
| if (mode.format != FORMAT_PAL) { |
| mode.restart = 1; |
| mode.format = FORMAT_PAL; |
| mode.fdec = FDEC_1; |
| channel->width = LINE_SZ_4CIFS_PAL; |
| channel->height = NUM_LINES_4CIFS_PAL * 2; |
| } |
| } else { |
| ret = -EINVAL; |
| goto out_s_std; |
| } |
| fh->channel->std = i; |
| if (mode.restart) |
| s2255_set_mode(fh->channel, &mode); |
| out_s_std: |
| mutex_unlock(&q->vb_lock); |
| return ret; |
| } |
| |
| static int vidioc_g_std(struct file *file, void *priv, v4l2_std_id *i) |
| { |
| struct s2255_fh *fh = priv; |
| |
| *i = fh->channel->std; |
| return 0; |
| } |
| |
| /* Sensoray 2255 is a multiple channel capture device. |
| It does not have a "crossbar" of inputs. |
| We use one V4L device per channel. The user must |
| be aware that certain combinations are not allowed. |
| For instance, you cannot do full FPS on more than 2 channels(2 videodevs) |
| at once in color(you can do full fps on 4 channels with greyscale. |
| */ |
| static int vidioc_enum_input(struct file *file, void *priv, |
| struct v4l2_input *inp) |
| { |
| struct s2255_fh *fh = priv; |
| struct s2255_dev *dev = fh->dev; |
| struct s2255_channel *channel = fh->channel; |
| u32 status = 0; |
| if (inp->index != 0) |
| return -EINVAL; |
| inp->type = V4L2_INPUT_TYPE_CAMERA; |
| inp->std = S2255_NORMS; |
| inp->status = 0; |
| if (dev->dsp_fw_ver >= S2255_MIN_DSP_STATUS) { |
| int rc; |
| rc = s2255_cmd_status(fh->channel, &status); |
| dprintk(4, "s2255_cmd_status rc: %d status %x\n", rc, status); |
| if (rc == 0) |
| inp->status = (status & 0x01) ? 0 |
| : V4L2_IN_ST_NO_SIGNAL; |
| } |
| switch (dev->pid) { |
| case 0x2255: |
| default: |
| strlcpy(inp->name, "Composite", sizeof(inp->name)); |
| break; |
| case 0x2257: |
| strlcpy(inp->name, (channel->idx < 2) ? "Composite" : "S-Video", |
| sizeof(inp->name)); |
| break; |
| } |
| return 0; |
| } |
| |
| static int vidioc_g_input(struct file *file, void *priv, unsigned int *i) |
| { |
| *i = 0; |
| return 0; |
| } |
| static int vidioc_s_input(struct file *file, void *priv, unsigned int i) |
| { |
| if (i > 0) |
| return -EINVAL; |
| return 0; |
| } |
| |
| static int s2255_s_ctrl(struct v4l2_ctrl *ctrl) |
| { |
| struct s2255_channel *channel = |
| container_of(ctrl->handler, struct s2255_channel, hdl); |
| struct s2255_mode mode; |
| |
| mode = channel->mode; |
| dprintk(4, "%s\n", __func__); |
| |
| /* update the mode to the corresponding value */ |
| switch (ctrl->id) { |
| case V4L2_CID_BRIGHTNESS: |
| mode.bright = ctrl->val; |
| break; |
| case V4L2_CID_CONTRAST: |
| mode.contrast = ctrl->val; |
| break; |
| case V4L2_CID_HUE: |
| mode.hue = ctrl->val; |
| break; |
| case V4L2_CID_SATURATION: |
| mode.saturation = ctrl->val; |
| break; |
| case V4L2_CID_S2255_COLORFILTER: |
| mode.color &= ~MASK_INPUT_TYPE; |
| mode.color |= !ctrl->val << 16; |
| break; |
| case V4L2_CID_JPEG_COMPRESSION_QUALITY: |
| channel->jpegqual = ctrl->val; |
| return 0; |
| default: |
| return -EINVAL; |
| } |
| mode.restart = 0; |
| /* set mode here. Note: stream does not need restarted. |
| some V4L programs restart stream unnecessarily |
| after a s_crtl. |
| */ |
| s2255_set_mode(channel, &mode); |
| return 0; |
| } |
| |
| static int vidioc_g_jpegcomp(struct file *file, void *priv, |
| struct v4l2_jpegcompression *jc) |
| { |
| struct s2255_fh *fh = priv; |
| struct s2255_channel *channel = fh->channel; |
| |
| memset(jc, 0, sizeof(*jc)); |
| jc->quality = channel->jpegqual; |
| dprintk(2, "%s: quality %d\n", __func__, jc->quality); |
| return 0; |
| } |
| |
| static int vidioc_s_jpegcomp(struct file *file, void *priv, |
| const struct v4l2_jpegcompression *jc) |
| { |
| struct s2255_fh *fh = priv; |
| struct s2255_channel *channel = fh->channel; |
| if (jc->quality < 0 || jc->quality > 100) |
| return -EINVAL; |
| v4l2_ctrl_s_ctrl(channel->jpegqual_ctrl, jc->quality); |
| dprintk(2, "%s: quality %d\n", __func__, jc->quality); |
| return 0; |
| } |
| |
| static int vidioc_g_parm(struct file *file, void *priv, |
| struct v4l2_streamparm *sp) |
| { |
| struct s2255_fh *fh = priv; |
| __u32 def_num, def_dem; |
| struct s2255_channel *channel = fh->channel; |
| if (sp->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) |
| return -EINVAL; |
| sp->parm.capture.capability = V4L2_CAP_TIMEPERFRAME; |
| sp->parm.capture.capturemode = channel->cap_parm.capturemode; |
| def_num = (channel->mode.format == FORMAT_NTSC) ? 1001 : 1000; |
| def_dem = (channel->mode.format == FORMAT_NTSC) ? 30000 : 25000; |
| sp->parm.capture.timeperframe.denominator = def_dem; |
| switch (channel->mode.fdec) { |
| default: |
| case FDEC_1: |
| sp->parm.capture.timeperframe.numerator = def_num; |
| break; |
| case FDEC_2: |
| sp->parm.capture.timeperframe.numerator = def_num * 2; |
| break; |
| case FDEC_3: |
| sp->parm.capture.timeperframe.numerator = def_num * 3; |
| break; |
| case FDEC_5: |
| sp->parm.capture.timeperframe.numerator = def_num * 5; |
| break; |
| } |
| dprintk(4, "%s capture mode, %d timeperframe %d/%d\n", __func__, |
| sp->parm.capture.capturemode, |
| sp->parm.capture.timeperframe.numerator, |
| sp->parm.capture.timeperframe.denominator); |
| return 0; |
| } |
| |
| static int vidioc_s_parm(struct file *file, void *priv, |
| struct v4l2_streamparm *sp) |
| { |
| struct s2255_fh *fh = priv; |
| struct s2255_channel *channel = fh->channel; |
| struct s2255_mode mode; |
| int fdec = FDEC_1; |
| __u32 def_num, def_dem; |
| if (sp->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) |
| return -EINVAL; |
| mode = channel->mode; |
| /* high quality capture mode requires a stream restart */ |
| if (channel->cap_parm.capturemode |
| != sp->parm.capture.capturemode && res_locked(fh)) |
| return -EBUSY; |
| def_num = (mode.format == FORMAT_NTSC) ? 1001 : 1000; |
| def_dem = (mode.format == FORMAT_NTSC) ? 30000 : 25000; |
| if (def_dem != sp->parm.capture.timeperframe.denominator) |
| sp->parm.capture.timeperframe.numerator = def_num; |
| else if (sp->parm.capture.timeperframe.numerator <= def_num) |
| sp->parm.capture.timeperframe.numerator = def_num; |
| else if (sp->parm.capture.timeperframe.numerator <= (def_num * 2)) { |
| sp->parm.capture.timeperframe.numerator = def_num * 2; |
| fdec = FDEC_2; |
| } else if (sp->parm.capture.timeperframe.numerator <= (def_num * 3)) { |
| sp->parm.capture.timeperframe.numerator = def_num * 3; |
| fdec = FDEC_3; |
| } else { |
| sp->parm.capture.timeperframe.numerator = def_num * 5; |
| fdec = FDEC_5; |
| } |
| mode.fdec = fdec; |
| sp->parm.capture.timeperframe.denominator = def_dem; |
| s2255_set_mode(channel, &mode); |
| dprintk(4, "%s capture mode, %d timeperframe %d/%d, fdec %d\n", |
| __func__, |
| sp->parm.capture.capturemode, |
| sp->parm.capture.timeperframe.numerator, |
| sp->parm.capture.timeperframe.denominator, fdec); |
| return 0; |
| } |
| |
| #define NUM_SIZE_ENUMS 3 |
| static const struct v4l2_frmsize_discrete ntsc_sizes[] = { |
| { 640, 480 }, |
| { 640, 240 }, |
| { 320, 240 }, |
| }; |
| static const struct v4l2_frmsize_discrete pal_sizes[] = { |
| { 704, 576 }, |
| { 704, 288 }, |
| { 352, 288 }, |
| }; |
| |
| static int vidioc_enum_framesizes(struct file *file, void *priv, |
| struct v4l2_frmsizeenum *fe) |
| { |
| struct s2255_fh *fh = priv; |
| struct s2255_channel *channel = fh->channel; |
| int is_ntsc = channel->std & V4L2_STD_525_60; |
| const struct s2255_fmt *fmt; |
| |
| if (fe->index >= NUM_SIZE_ENUMS) |
| return -EINVAL; |
| |
| fmt = format_by_fourcc(fe->pixel_format); |
| if (fmt == NULL) |
| return -EINVAL; |
| fe->type = V4L2_FRMSIZE_TYPE_DISCRETE; |
| fe->discrete = is_ntsc ? ntsc_sizes[fe->index] : pal_sizes[fe->index]; |
| return 0; |
| } |
| |
| static int vidioc_enum_frameintervals(struct file *file, void *priv, |
| struct v4l2_frmivalenum *fe) |
| { |
| struct s2255_fh *fh = priv; |
| struct s2255_channel *channel = fh->channel; |
| const struct s2255_fmt *fmt; |
| const struct v4l2_frmsize_discrete *sizes; |
| int is_ntsc = channel->std & V4L2_STD_525_60; |
| #define NUM_FRAME_ENUMS 4 |
| int frm_dec[NUM_FRAME_ENUMS] = {1, 2, 3, 5}; |
| int i; |
| |
| if (fe->index >= NUM_FRAME_ENUMS) |
| return -EINVAL; |
| |
| fmt = format_by_fourcc(fe->pixel_format); |
| if (fmt == NULL) |
| return -EINVAL; |
| |
| sizes = is_ntsc ? ntsc_sizes : pal_sizes; |
| for (i = 0; i < NUM_SIZE_ENUMS; i++, sizes++) |
| if (fe->width == sizes->width && |
| fe->height == sizes->height) |
| break; |
| if (i == NUM_SIZE_ENUMS) |
| return -EINVAL; |
| |
| fe->type = V4L2_FRMIVAL_TYPE_DISCRETE; |
| fe->discrete.denominator = is_ntsc ? 30000 : 25000; |
| fe->discrete.numerator = (is_ntsc ? 1001 : 1000) * frm_dec[fe->index]; |
| dprintk(4, "%s discrete %d/%d\n", __func__, fe->discrete.numerator, |
| fe->discrete.denominator); |
| return 0; |
| } |
| |
| static int __s2255_open(struct file *file) |
| { |
| struct video_device *vdev = video_devdata(file); |
| struct s2255_channel *channel = video_drvdata(file); |
| struct s2255_dev *dev = to_s2255_dev(vdev->v4l2_dev); |
| struct s2255_fh *fh; |
| enum v4l2_buf_type type = V4L2_BUF_TYPE_VIDEO_CAPTURE; |
| int state; |
| dprintk(1, "s2255: open called (dev=%s)\n", |
| video_device_node_name(vdev)); |
| state = atomic_read(&dev->fw_data->fw_state); |
| switch (state) { |
| case S2255_FW_DISCONNECTING: |
| return -ENODEV; |
| case S2255_FW_FAILED: |
| s2255_dev_err(&dev->udev->dev, |
| "firmware load failed. retrying.\n"); |
| s2255_fwload_start(dev, 1); |
| wait_event_timeout(dev->fw_data->wait_fw, |
| ((atomic_read(&dev->fw_data->fw_state) |
| == S2255_FW_SUCCESS) || |
| (atomic_read(&dev->fw_data->fw_state) |
| == S2255_FW_DISCONNECTING)), |
| msecs_to_jiffies(S2255_LOAD_TIMEOUT)); |
| /* state may have changed, re-read */ |
| state = atomic_read(&dev->fw_data->fw_state); |
| break; |
| case S2255_FW_NOTLOADED: |
| case S2255_FW_LOADED_DSPWAIT: |
| /* give S2255_LOAD_TIMEOUT time for firmware to load in case |
| driver loaded and then device immediately opened */ |
| printk(KERN_INFO "%s waiting for firmware load\n", __func__); |
| wait_event_timeout(dev->fw_data->wait_fw, |
| ((atomic_read(&dev->fw_data->fw_state) |
| == S2255_FW_SUCCESS) || |
| (atomic_read(&dev->fw_data->fw_state) |
| == S2255_FW_DISCONNECTING)), |
| msecs_to_jiffies(S2255_LOAD_TIMEOUT)); |
| /* state may have changed, re-read */ |
| state = atomic_read(&dev->fw_data->fw_state); |
| break; |
| case S2255_FW_SUCCESS: |
| default: |
| break; |
| } |
| /* state may have changed in above switch statement */ |
| switch (state) { |
| case S2255_FW_SUCCESS: |
| break; |
| case S2255_FW_FAILED: |
| printk(KERN_INFO "2255 firmware load failed.\n"); |
| return -ENODEV; |
| case S2255_FW_DISCONNECTING: |
| printk(KERN_INFO "%s: disconnecting\n", __func__); |
| return -ENODEV; |
| case S2255_FW_LOADED_DSPWAIT: |
| case S2255_FW_NOTLOADED: |
| printk(KERN_INFO "%s: firmware not loaded yet" |
| "please try again later\n", |
| __func__); |
| /* |
| * Timeout on firmware load means device unusable. |
| * Set firmware failure state. |
| * On next s2255_open the firmware will be reloaded. |
| */ |
| atomic_set(&dev->fw_data->fw_state, |
| S2255_FW_FAILED); |
| return -EAGAIN; |
| default: |
| printk(KERN_INFO "%s: unknown state\n", __func__); |
| return -EFAULT; |
| } |
| /* allocate + initialize per filehandle data */ |
| fh = kzalloc(sizeof(*fh), GFP_KERNEL); |
| if (NULL == fh) |
| return -ENOMEM; |
| v4l2_fh_init(&fh->fh, vdev); |
| v4l2_fh_add(&fh->fh); |
| file->private_data = &fh->fh; |
| fh->dev = dev; |
| fh->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; |
| fh->channel = channel; |
| if (!channel->configured) { |
| /* configure channel to default state */ |
| channel->fmt = &formats[0]; |
| s2255_set_mode(channel, &channel->mode); |
| channel->configured = 1; |
| } |
| dprintk(1, "%s: dev=%s type=%s\n", __func__, |
| video_device_node_name(vdev), v4l2_type_names[type]); |
| dprintk(2, "%s: fh=0x%08lx, dev=0x%08lx, vidq=0x%08lx\n", __func__, |
| (unsigned long)fh, (unsigned long)dev, |
| (unsigned long)&channel->vidq); |
| dprintk(4, "%s: list_empty active=%d\n", __func__, |
| list_empty(&channel->vidq.active)); |
| videobuf_queue_vmalloc_init(&fh->vb_vidq, &s2255_video_qops, |
| NULL, &dev->slock, |
| fh->type, |
| V4L2_FIELD_INTERLACED, |
| sizeof(struct s2255_buffer), |
| fh, vdev->lock); |
| return 0; |
| } |
| |
| static int s2255_open(struct file *file) |
| { |
| struct video_device *vdev = video_devdata(file); |
| int ret; |
| |
| if (mutex_lock_interruptible(vdev->lock)) |
| return -ERESTARTSYS; |
| ret = __s2255_open(file); |
| mutex_unlock(vdev->lock); |
| return ret; |
| } |
| |
| static unsigned int s2255_poll(struct file *file, |
| struct poll_table_struct *wait) |
| { |
| struct s2255_fh *fh = file->private_data; |
| struct s2255_dev *dev = fh->dev; |
| int rc = v4l2_ctrl_poll(file, wait); |
| |
| dprintk(100, "%s\n", __func__); |
| if (V4L2_BUF_TYPE_VIDEO_CAPTURE != fh->type) |
| return POLLERR; |
| mutex_lock(&dev->lock); |
| rc |= videobuf_poll_stream(file, &fh->vb_vidq, wait); |
| mutex_unlock(&dev->lock); |
| return rc; |
| } |
| |
| static void s2255_destroy(struct s2255_dev *dev) |
| { |
| /* board shutdown stops the read pipe if it is running */ |
| s2255_board_shutdown(dev); |
| /* make sure firmware still not trying to load */ |
| del_timer(&dev->timer); /* only started in .probe and .open */ |
| if (dev->fw_data->fw_urb) { |
| usb_kill_urb(dev->fw_data->fw_urb); |
| usb_free_urb(dev->fw_data->fw_urb); |
| dev->fw_data->fw_urb = NULL; |
| } |
| release_firmware(dev->fw_data->fw); |
| kfree(dev->fw_data->pfw_data); |
| kfree(dev->fw_data); |
| /* reset the DSP so firmware can be reloaded next time */ |
| s2255_reset_dsppower(dev); |
| mutex_destroy(&dev->lock); |
| usb_put_dev(dev->udev); |
| v4l2_device_unregister(&dev->v4l2_dev); |
| dprintk(1, "%s", __func__); |
| kfree(dev); |
| } |
| |
| static int s2255_release(struct file *file) |
| { |
| struct s2255_fh *fh = file->private_data; |
| struct s2255_dev *dev = fh->dev; |
| struct video_device *vdev = video_devdata(file); |
| struct s2255_channel *channel = fh->channel; |
| if (!dev) |
| return -ENODEV; |
| mutex_lock(&dev->lock); |
| /* turn off stream */ |
| if (res_check(fh)) { |
| if (channel->b_acquire) |
| s2255_stop_acquire(fh->channel); |
| videobuf_streamoff(&fh->vb_vidq); |
| res_free(fh); |
| } |
| videobuf_mmap_free(&fh->vb_vidq); |
| mutex_unlock(&dev->lock); |
| dprintk(1, "%s (dev=%s)\n", __func__, video_device_node_name(vdev)); |
| v4l2_fh_del(&fh->fh); |
| v4l2_fh_exit(&fh->fh); |
| kfree(fh); |
| return 0; |
| } |
| |
| static int s2255_mmap_v4l(struct file *file, struct vm_area_struct *vma) |
| { |
| struct s2255_fh *fh = file->private_data; |
| struct s2255_dev *dev; |
| int ret; |
| |
| if (!fh) |
| return -ENODEV; |
| dev = fh->dev; |
| dprintk(4, "%s, vma=0x%08lx\n", __func__, (unsigned long)vma); |
| if (mutex_lock_interruptible(&dev->lock)) |
| return -ERESTARTSYS; |
| ret = videobuf_mmap_mapper(&fh->vb_vidq, vma); |
| mutex_unlock(&dev->lock); |
| dprintk(4, "%s vma start=0x%08lx, size=%ld, ret=%d\n", __func__, |
| (unsigned long)vma->vm_start, |
| (unsigned long)vma->vm_end - (unsigned long)vma->vm_start, ret); |
| return ret; |
| } |
| |
| static const struct v4l2_file_operations s2255_fops_v4l = { |
| .owner = THIS_MODULE, |
| .open = s2255_open, |
| .release = s2255_release, |
| .poll = s2255_poll, |
| .unlocked_ioctl = video_ioctl2, /* V4L2 ioctl handler */ |
| .mmap = s2255_mmap_v4l, |
| }; |
| |
| static const struct v4l2_ioctl_ops s2255_ioctl_ops = { |
| .vidioc_querycap = vidioc_querycap, |
| .vidioc_enum_fmt_vid_cap = vidioc_enum_fmt_vid_cap, |
| .vidioc_g_fmt_vid_cap = vidioc_g_fmt_vid_cap, |
| .vidioc_try_fmt_vid_cap = vidioc_try_fmt_vid_cap, |
| .vidioc_s_fmt_vid_cap = vidioc_s_fmt_vid_cap, |
| .vidioc_reqbufs = vidioc_reqbufs, |
| .vidioc_querybuf = vidioc_querybuf, |
| .vidioc_qbuf = vidioc_qbuf, |
| .vidioc_dqbuf = vidioc_dqbuf, |
| .vidioc_s_std = vidioc_s_std, |
| .vidioc_g_std = vidioc_g_std, |
| .vidioc_enum_input = vidioc_enum_input, |
| .vidioc_g_input = vidioc_g_input, |
| .vidioc_s_input = vidioc_s_input, |
| .vidioc_streamon = vidioc_streamon, |
| .vidioc_streamoff = vidioc_streamoff, |
| .vidioc_s_jpegcomp = vidioc_s_jpegcomp, |
| .vidioc_g_jpegcomp = vidioc_g_jpegcomp, |
| .vidioc_s_parm = vidioc_s_parm, |
| .vidioc_g_parm = vidioc_g_parm, |
| .vidioc_enum_framesizes = vidioc_enum_framesizes, |
| .vidioc_enum_frameintervals = vidioc_enum_frameintervals, |
| .vidioc_log_status = v4l2_ctrl_log_status, |
| .vidioc_subscribe_event = v4l2_ctrl_subscribe_event, |
| .vidioc_unsubscribe_event = v4l2_event_unsubscribe, |
| }; |
| |
| static void s2255_video_device_release(struct video_device *vdev) |
| { |
| struct s2255_dev *dev = to_s2255_dev(vdev->v4l2_dev); |
| struct s2255_channel *channel = |
| container_of(vdev, struct s2255_channel, vdev); |
| |
| v4l2_ctrl_handler_free(&channel->hdl); |
| dprintk(4, "%s, chnls: %d\n", __func__, |
| atomic_read(&dev->num_channels)); |
| |
| if (atomic_dec_and_test(&dev->num_channels)) |
| s2255_destroy(dev); |
| return; |
| } |
| |
| static struct video_device template = { |
| .name = "s2255v", |
| .fops = &s2255_fops_v4l, |
| .ioctl_ops = &s2255_ioctl_ops, |
| .release = s2255_video_device_release, |
| .tvnorms = S2255_NORMS, |
| }; |
| |
| static const struct v4l2_ctrl_ops s2255_ctrl_ops = { |
| .s_ctrl = s2255_s_ctrl, |
| }; |
| |
| static const struct v4l2_ctrl_config color_filter_ctrl = { |
| .ops = &s2255_ctrl_ops, |
| .name = "Color Filter", |
| .id = V4L2_CID_S2255_COLORFILTER, |
| .type = V4L2_CTRL_TYPE_BOOLEAN, |
| .max = 1, |
| .step = 1, |
| .def = 1, |
| }; |
| |
| static int s2255_probe_v4l(struct s2255_dev *dev) |
| { |
| int ret; |
| int i; |
| int cur_nr = video_nr; |
| struct s2255_channel *channel; |
| ret = v4l2_device_register(&dev->interface->dev, &dev->v4l2_dev); |
| if (ret) |
| return ret; |
| /* initialize all video 4 linux */ |
| /* register 4 video devices */ |
| for (i = 0; i < MAX_CHANNELS; i++) { |
| channel = &dev->channel[i]; |
| INIT_LIST_HEAD(&channel->vidq.active); |
| |
| v4l2_ctrl_handler_init(&channel->hdl, 6); |
| v4l2_ctrl_new_std(&channel->hdl, &s2255_ctrl_ops, |
| V4L2_CID_BRIGHTNESS, -127, 127, 1, DEF_BRIGHT); |
| v4l2_ctrl_new_std(&channel->hdl, &s2255_ctrl_ops, |
| V4L2_CID_CONTRAST, 0, 255, 1, DEF_CONTRAST); |
| v4l2_ctrl_new_std(&channel->hdl, &s2255_ctrl_ops, |
| V4L2_CID_SATURATION, 0, 255, 1, DEF_SATURATION); |
| v4l2_ctrl_new_std(&channel->hdl, &s2255_ctrl_ops, |
| V4L2_CID_HUE, 0, 255, 1, DEF_HUE); |
| channel->jpegqual_ctrl = v4l2_ctrl_new_std(&channel->hdl, |
| &s2255_ctrl_ops, |
| V4L2_CID_JPEG_COMPRESSION_QUALITY, |
| 0, 100, 1, S2255_DEF_JPEG_QUAL); |
| if (dev->dsp_fw_ver >= S2255_MIN_DSP_COLORFILTER && |
| (dev->pid != 0x2257 || channel->idx <= 1)) |
| v4l2_ctrl_new_custom(&channel->hdl, &color_filter_ctrl, NULL); |
| if (channel->hdl.error) { |
| ret = channel->hdl.error; |
| v4l2_ctrl_handler_free(&channel->hdl); |
| dev_err(&dev->udev->dev, "couldn't register control\n"); |
| break; |
| } |
| channel->vidq.dev = dev; |
| /* register 4 video devices */ |
| channel->vdev = template; |
| channel->vdev.ctrl_handler = &channel->hdl; |
| channel->vdev.lock = &dev->lock; |
| channel->vdev.v4l2_dev = &dev->v4l2_dev; |
| set_bit(V4L2_FL_USE_FH_PRIO, &channel->vdev.flags); |
| video_set_drvdata(&channel->vdev, channel); |
| if (video_nr == -1) |
| ret = video_register_device(&channel->vdev, |
| VFL_TYPE_GRABBER, |
| video_nr); |
| else |
| ret = video_register_device(&channel->vdev, |
| VFL_TYPE_GRABBER, |
| cur_nr + i); |
| |
| if (ret) { |
| dev_err(&dev->udev->dev, |
| "failed to register video device!\n"); |
| break; |
| } |
| atomic_inc(&dev->num_channels); |
| v4l2_info(&dev->v4l2_dev, "V4L2 device registered as %s\n", |
| video_device_node_name(&channel->vdev)); |
| |
| } |
| printk(KERN_INFO "Sensoray 2255 V4L driver Revision: %s\n", |
| S2255_VERSION); |
| /* if no channels registered, return error and probe will fail*/ |
| if (atomic_read(&dev->num_channels) == 0) { |
| v4l2_device_unregister(&dev->v4l2_dev); |
| return ret; |
| } |
| if (atomic_read(&dev->num_channels) != MAX_CHANNELS) |
| printk(KERN_WARNING "s2255: Not all channels available.\n"); |
| return 0; |
| } |
| |
| /* this function moves the usb stream read pipe data |
| * into the system buffers. |
| * returns 0 on success, EAGAIN if more data to process( call this |
| * function again). |
| * |
| * Received frame structure: |
| * bytes 0-3: marker : 0x2255DA4AL (S2255_MARKER_FRAME) |
| * bytes 4-7: channel: 0-3 |
| * bytes 8-11: payload size: size of the frame |
| * bytes 12-payloadsize+12: frame data |
| */ |
| static int save_frame(struct s2255_dev *dev, struct s2255_pipeinfo *pipe_info) |
| { |
| char *pdest; |
| u32 offset = 0; |
| int bframe = 0; |
| char *psrc; |
| unsigned long copy_size; |
| unsigned long size; |
| s32 idx = -1; |
| struct s2255_framei *frm; |
| unsigned char *pdata; |
| struct s2255_channel *channel; |
| dprintk(100, "buffer to user\n"); |
| channel = &dev->channel[dev->cc]; |
| idx = channel->cur_frame; |
| frm = &channel->buffer.frame[idx]; |
| if (frm->ulState == S2255_READ_IDLE) { |
| int jj; |
| unsigned int cc; |
| __le32 *pdword; /*data from dsp is little endian */ |
| int payload; |
| /* search for marker codes */ |
| pdata = (unsigned char *)pipe_info->transfer_buffer; |
| pdword = (__le32 *)pdata; |
| for (jj = 0; jj < (pipe_info->cur_transfer_size - 12); jj++) { |
| switch (*pdword) { |
| case S2255_MARKER_FRAME: |
| dprintk(4, "found frame marker at offset:" |
| " %d [%x %x]\n", jj, pdata[0], |
| pdata[1]); |
| offset = jj + PREFIX_SIZE; |
| bframe = 1; |
| cc = le32_to_cpu(pdword[1]); |
| if (cc >= MAX_CHANNELS) { |
| printk(KERN_ERR |
| "bad channel\n"); |
| return -EINVAL; |
| } |
| /* reverse it */ |
| dev->cc = G_chnmap[cc]; |
| channel = &dev->channel[dev->cc]; |
| payload = le32_to_cpu(pdword[3]); |
| if (payload > channel->req_image_size) { |
| channel->bad_payload++; |
| /* discard the bad frame */ |
| return -EINVAL; |
| } |
| channel->pkt_size = payload; |
| channel->jpg_size = le32_to_cpu(pdword[4]); |
| break; |
| case S2255_MARKER_RESPONSE: |
| |
| pdata += DEF_USB_BLOCK; |
| jj += DEF_USB_BLOCK; |
| if (le32_to_cpu(pdword[1]) >= MAX_CHANNELS) |
| break; |
| cc = G_chnmap[le32_to_cpu(pdword[1])]; |
| if (cc >= MAX_CHANNELS) |
| break; |
| channel = &dev->channel[cc]; |
| switch (pdword[2]) { |
| case S2255_RESPONSE_SETMODE: |
| /* check if channel valid */ |
| /* set mode ready */ |
| channel->setmode_ready = 1; |
| wake_up(&channel->wait_setmode); |
| dprintk(5, "setmode ready %d\n", cc); |
| break; |
| case S2255_RESPONSE_FW: |
| dev->chn_ready |= (1 << cc); |
| if ((dev->chn_ready & 0x0f) != 0x0f) |
| break; |
| /* all channels ready */ |
| printk(KERN_INFO "s2255: fw loaded\n"); |
| atomic_set(&dev->fw_data->fw_state, |
| S2255_FW_SUCCESS); |
| wake_up(&dev->fw_data->wait_fw); |
| break; |
| case S2255_RESPONSE_STATUS: |
| channel->vidstatus = le32_to_cpu(pdword[3]); |
| channel->vidstatus_ready = 1; |
| wake_up(&channel->wait_vidstatus); |
| dprintk(5, "got vidstatus %x chan %d\n", |
| le32_to_cpu(pdword[3]), cc); |
| break; |
| default: |
| printk(KERN_INFO "s2255 unknown resp\n"); |
| } |
| default: |
| pdata++; |
| break; |
| } |
| if (bframe) |
| break; |
| } /* for */ |
| if (!bframe) |
| return -EINVAL; |
| } |
| channel = &dev->channel[dev->cc]; |
| idx = channel->cur_frame; |
| frm = &channel->buffer.frame[idx]; |
| /* search done. now find out if should be acquiring on this channel */ |
| if (!channel->b_acquire) { |
| /* we found a frame, but this channel is turned off */ |
| frm->ulState = S2255_READ_IDLE; |
| return -EINVAL; |
| } |
| |
| if (frm->ulState == S2255_READ_IDLE) { |
| frm->ulState = S2255_READ_FRAME; |
| frm->cur_size = 0; |
| } |
| |
| /* skip the marker 512 bytes (and offset if out of sync) */ |
| psrc = (u8 *)pipe_info->transfer_buffer + offset; |
| |
| |
| if (frm->lpvbits == NULL) { |
| dprintk(1, "s2255 frame buffer == NULL.%p %p %d %d", |
| frm, dev, dev->cc, idx); |
| return -ENOMEM; |
| } |
| |
| pdest = frm->lpvbits + frm->cur_size; |
| |
| copy_size = (pipe_info->cur_transfer_size - offset); |
| |
| size = channel->pkt_size - PREFIX_SIZE; |
| |
| /* sanity check on pdest */ |
| if ((copy_size + frm->cur_size) < channel->req_image_size) |
| memcpy(pdest, psrc, copy_size); |
| |
| frm->cur_size += copy_size; |
| dprintk(4, "cur_size size %lu size %lu \n", frm->cur_size, size); |
| |
| if (frm->cur_size >= size) { |
| dprintk(2, "****************[%d]Buffer[%d]full*************\n", |
| dev->cc, idx); |
| channel->last_frame = channel->cur_frame; |
| channel->cur_frame++; |
| /* end of system frame ring buffer, start at zero */ |
| if ((channel->cur_frame == SYS_FRAMES) || |
| (channel->cur_frame == channel->buffer.dwFrames)) |
| channel->cur_frame = 0; |
| /* frame ready */ |
| if (channel->b_acquire) |
| s2255_got_frame(channel, channel->jpg_size); |
| channel->frame_count++; |
| frm->ulState = S2255_READ_IDLE; |
| frm->cur_size = 0; |
| |
| } |
| /* done successfully */ |
| return 0; |
| } |
| |
| static void s2255_read_video_callback(struct s2255_dev *dev, |
| struct s2255_pipeinfo *pipe_info) |
| { |
| int res; |
| dprintk(50, "callback read video \n"); |
| |
| if (dev->cc >= MAX_CHANNELS) { |
| dev->cc = 0; |
| dev_err(&dev->udev->dev, "invalid channel\n"); |
| return; |
| } |
| /* otherwise copy to the system buffers */ |
| res = save_frame(dev, pipe_info); |
| if (res != 0) |
| dprintk(4, "s2255: read callback failed\n"); |
| |
| dprintk(50, "callback read video done\n"); |
| return; |
| } |
| |
| static long s2255_vendor_req(struct s2255_dev *dev, unsigned char Request, |
| u16 Index, u16 Value, void *TransferBuffer, |
| s32 TransferBufferLength, int bOut) |
| { |
| int r; |
| if (!bOut) { |
| r = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0), |
| Request, |
| USB_TYPE_VENDOR | USB_RECIP_DEVICE | |
| USB_DIR_IN, |
| Value, Index, TransferBuffer, |
| TransferBufferLength, HZ * 5); |
| } else { |
| r = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0), |
| Request, USB_TYPE_VENDOR | USB_RECIP_DEVICE, |
| Value, Index, TransferBuffer, |
| TransferBufferLength, HZ * 5); |
| } |
| return r; |
| } |
| |
| /* |
| * retrieve FX2 firmware version. future use. |
| * @param dev pointer to device extension |
| * @return -1 for fail, else returns firmware version as an int(16 bits) |
| */ |
| static int s2255_get_fx2fw(struct s2255_dev *dev) |
| { |
| int fw; |
| int ret; |
| unsigned char transBuffer[64]; |
| ret = s2255_vendor_req(dev, S2255_VR_FW, 0, 0, transBuffer, 2, |
| S2255_VR_IN); |
| if (ret < 0) |
| dprintk(2, "get fw error: %x\n", ret); |
| fw = transBuffer[0] + (transBuffer[1] << 8); |
| dprintk(2, "Get FW %x %x\n", transBuffer[0], transBuffer[1]); |
| return fw; |
| } |
| |
| /* |
| * Create the system ring buffer to copy frames into from the |
| * usb read pipe. |
| */ |
| static int s2255_create_sys_buffers(struct s2255_channel *channel) |
| { |
| unsigned long i; |
| unsigned long reqsize; |
| dprintk(1, "create sys buffers\n"); |
| channel->buffer.dwFrames = SYS_FRAMES; |
| /* always allocate maximum size(PAL) for system buffers */ |
| reqsize = SYS_FRAMES_MAXSIZE; |
| |
| if (reqsize > SYS_FRAMES_MAXSIZE) |
| reqsize = SYS_FRAMES_MAXSIZE; |
| |
| for (i = 0; i < SYS_FRAMES; i++) { |
| /* allocate the frames */ |
| channel->buffer.frame[i].lpvbits = vmalloc(reqsize); |
| dprintk(1, "valloc %p chan %d, idx %lu, pdata %p\n", |
| &channel->buffer.frame[i], channel->idx, i, |
| channel->buffer.frame[i].lpvbits); |
| channel->buffer.frame[i].size = reqsize; |
| if (channel->buffer.frame[i].lpvbits == NULL) { |
| printk(KERN_INFO "out of memory. using less frames\n"); |
| channel->buffer.dwFrames = i; |
| break; |
| } |
| } |
| |
| /* make sure internal states are set */ |
| for (i = 0; i < SYS_FRAMES; i++) { |
| channel->buffer.frame[i].ulState = 0; |
| channel->buffer.frame[i].cur_size = 0; |
| } |
| |
| channel->cur_frame = 0; |
| channel->last_frame = -1; |
| return 0; |
| } |
| |
| static int s2255_release_sys_buffers(struct s2255_channel *channel) |
| { |
| unsigned long i; |
| dprintk(1, "release sys buffers\n"); |
| for (i = 0; i < SYS_FRAMES; i++) { |
| if (channel->buffer.frame[i].lpvbits) { |
| dprintk(1, "vfree %p\n", |
| channel->buffer.frame[i].lpvbits); |
| vfree(channel->buffer.frame[i].lpvbits); |
| } |
| channel->buffer.frame[i].lpvbits = NULL; |
| } |
| return 0; |
| } |
| |
| static int s2255_board_init(struct s2255_dev *dev) |
| { |
| struct s2255_mode mode_def = DEF_MODEI_NTSC_CONT; |
| int fw_ver; |
| int j; |
| struct s2255_pipeinfo *pipe = &dev->pipe; |
| dprintk(4, "board init: %p", dev); |
| memset(pipe, 0, sizeof(*pipe)); |
| pipe->dev = dev; |
| pipe->cur_transfer_size = S2255_USB_XFER_SIZE; |
| pipe->max_transfer_size = S2255_USB_XFER_SIZE; |
| |
| pipe->transfer_buffer = kzalloc(pipe->max_transfer_size, |
| GFP_KERNEL); |
| if (pipe->transfer_buffer == NULL) { |
| dprintk(1, "out of memory!\n"); |
| return -ENOMEM; |
| } |
| /* query the firmware */ |
| fw_ver = s2255_get_fx2fw(dev); |
| |
| printk(KERN_INFO "s2255: usb firmware version %d.%d\n", |
| (fw_ver >> 8) & 0xff, |
| fw_ver & 0xff); |
| |
| if (fw_ver < S2255_CUR_USB_FWVER) |
| printk(KERN_INFO "s2255: newer USB firmware available\n"); |
| |
| for (j = 0; j < MAX_CHANNELS; j++) { |
| struct s2255_channel *channel = &dev->channel[j]; |
| channel->b_acquire = 0; |
| channel->mode = mode_def; |
| if (dev->pid == 0x2257 && j > 1) |
| channel->mode.color |= (1 << 16); |
| channel->jpegqual = S2255_DEF_JPEG_QUAL; |
| channel->width = LINE_SZ_4CIFS_NTSC; |
| channel->height = NUM_LINES_4CIFS_NTSC * 2; |
| channel->std = V4L2_STD_NTSC_M; |
| channel->fmt = &formats[0]; |
| channel->mode.restart = 1; |
| channel->req_image_size = get_transfer_size(&mode_def); |
| channel->frame_count = 0; |
| /* create the system buffers */ |
| s2255_create_sys_buffers(channel); |
| } |
| /* start read pipe */ |
| s2255_start_readpipe(dev); |
| dprintk(1, "%s: success\n", __func__); |
| return 0; |
| } |
| |
| static int s2255_board_shutdown(struct s2255_dev *dev) |
| { |
| u32 i; |
| dprintk(1, "%s: dev: %p", __func__, dev); |
| |
| for (i = 0; i < MAX_CHANNELS; i++) { |
| if (dev->channel[i].b_acquire) |
| s2255_stop_acquire(&dev->channel[i]); |
| } |
| s2255_stop_readpipe(dev); |
| for (i = 0; i < MAX_CHANNELS; i++) |
| s2255_release_sys_buffers(&dev->channel[i]); |
| /* release transfer buffer */ |
| kfree(dev->pipe.transfer_buffer); |
| return 0; |
| } |
| |
| static void read_pipe_completion(struct urb *purb) |
| { |
| struct s2255_pipeinfo *pipe_info; |
| struct s2255_dev *dev; |
| int status; |
| int pipe; |
| pipe_info = purb->context; |
| dprintk(100, "%s: urb:%p, status %d\n", __func__, purb, |
| purb->status); |
| if (pipe_info == NULL) { |
| dev_err(&purb->dev->dev, "no context!\n"); |
| return; |
| } |
| |
| dev = pipe_info->dev; |
| if (dev == NULL) { |
| dev_err(&purb->dev->dev, "no context!\n"); |
| return; |
| } |
| status = purb->status; |
| /* if shutting down, do not resubmit, exit immediately */ |
| if (status == -ESHUTDOWN) { |
| dprintk(2, "%s: err shutdown\n", __func__); |
| pipe_info->err_count++; |
| return; |
| } |
| |
| if (pipe_info->state == 0) { |
| dprintk(2, "%s: exiting USB pipe", __func__); |
| return; |
| } |
| |
| if (status == 0) |
| s2255_read_video_callback(dev, pipe_info); |
| else { |
| pipe_info->err_count++; |
| dprintk(1, "%s: failed URB %d\n", __func__, status); |
| } |
| |
| pipe = usb_rcvbulkpipe(dev->udev, dev->read_endpoint); |
| /* reuse urb */ |
| usb_fill_bulk_urb(pipe_info->stream_urb, dev->udev, |
| pipe, |
| pipe_info->transfer_buffer, |
| pipe_info->cur_transfer_size, |
| read_pipe_completion, pipe_info); |
| |
| if (pipe_info->state != 0) { |
| if (usb_submit_urb(pipe_info->stream_urb, GFP_ATOMIC)) { |
| dev_err(&dev->udev->dev, "error submitting urb\n"); |
| } |
| } else { |
| dprintk(2, "%s :complete state 0\n", __func__); |
| } |
| return; |
| } |
| |
| static int s2255_start_readpipe(struct s2255_dev *dev) |
| { |
| int pipe; |
| int retval; |
| struct s2255_pipeinfo *pipe_info = &dev->pipe; |
| pipe = usb_rcvbulkpipe(dev->udev, dev->read_endpoint); |
| dprintk(2, "%s: IN %d\n", __func__, dev->read_endpoint); |
| pipe_info->state = 1; |
| pipe_info->err_count = 0; |
| pipe_info->stream_urb = usb_alloc_urb(0, GFP_KERNEL); |
| if (!pipe_info->stream_urb) { |
| dev_err(&dev->udev->dev, |
| "ReadStream: Unable to alloc URB\n"); |
| return -ENOMEM; |
| } |
| /* transfer buffer allocated in board_init */ |
| usb_fill_bulk_urb(pipe_info->stream_urb, dev->udev, |
| pipe, |
| pipe_info->transfer_buffer, |
| pipe_info->cur_transfer_size, |
| read_pipe_completion, pipe_info); |
| retval = usb_submit_urb(pipe_info->stream_urb, GFP_KERNEL); |
| if (retval) { |
| printk(KERN_ERR "s2255: start read pipe failed\n"); |
| return retval; |
| } |
| return 0; |
| } |
| |
| /* starts acquisition process */ |
| static int s2255_start_acquire(struct s2255_channel *channel) |
| { |
| unsigned char *buffer; |
| int res; |
| unsigned long chn_rev; |
| int j; |
| struct s2255_dev *dev = to_s2255_dev(channel->vdev.v4l2_dev); |
| chn_rev = G_chnmap[channel->idx]; |
| buffer = kzalloc(512, GFP_KERNEL); |
| if (buffer == NULL) { |
| dev_err(&dev->udev->dev, "out of mem\n"); |
| return -ENOMEM; |
| } |
| |
| channel->last_frame = -1; |
| channel->bad_payload = 0; |
| channel->cur_frame = 0; |
| for (j = 0; j < SYS_FRAMES; j++) { |
| channel->buffer.frame[j].ulState = 0; |
| channel->buffer.frame[j].cur_size = 0; |
| } |
| |
| /* send the start command */ |
| *(__le32 *) buffer = IN_DATA_TOKEN; |
| *((__le32 *) buffer + 1) = (__le32) cpu_to_le32(chn_rev); |
| *((__le32 *) buffer + 2) = CMD_START; |
| res = s2255_write_config(dev->udev, (unsigned char *)buffer, 512); |
| if (res != 0) |
| dev_err(&dev->udev->dev, "CMD_START error\n"); |
| |
| dprintk(2, "start acquire exit[%d] %d \n", channel->idx, res); |
| kfree(buffer); |
| return 0; |
| } |
| |
| static int s2255_stop_acquire(struct s2255_channel *channel) |
| { |
| unsigned char *buffer; |
| int res; |
| unsigned long chn_rev; |
| struct s2255_dev *dev = to_s2255_dev(channel->vdev.v4l2_dev); |
| chn_rev = G_chnmap[channel->idx]; |
| buffer = kzalloc(512, GFP_KERNEL); |
| if (buffer == NULL) { |
| dev_err(&dev->udev->dev, "out of mem\n"); |
| return -ENOMEM; |
| } |
| /* send the stop command */ |
| *(__le32 *) buffer = IN_DATA_TOKEN; |
| *((__le32 *) buffer + 1) = (__le32) cpu_to_le32(chn_rev); |
| *((__le32 *) buffer + 2) = CMD_STOP; |
| res = s2255_write_config(dev->udev, (unsigned char *)buffer, 512); |
| if (res != 0) |
| dev_err(&dev->udev->dev, "CMD_STOP error\n"); |
| kfree(buffer); |
| channel->b_acquire = 0; |
| dprintk(4, "%s: chn %d, res %d\n", __func__, channel->idx, res); |
| return res; |
| } |
| |
| static void s2255_stop_readpipe(struct s2255_dev *dev) |
| { |
| struct s2255_pipeinfo *pipe = &dev->pipe; |
| |
| pipe->state = 0; |
| if (pipe->stream_urb) { |
| /* cancel urb */ |
| usb_kill_urb(pipe->stream_urb); |
| usb_free_urb(pipe->stream_urb); |
| pipe->stream_urb = NULL; |
| } |
| dprintk(4, "%s", __func__); |
| return; |
| } |
| |
| static void s2255_fwload_start(struct s2255_dev *dev, int reset) |
| { |
| if (reset) |
| s2255_reset_dsppower(dev); |
| dev->fw_data->fw_size = dev->fw_data->fw->size; |
| atomic_set(&dev->fw_data->fw_state, S2255_FW_NOTLOADED); |
| memcpy(dev->fw_data->pfw_data, |
| dev->fw_data->fw->data, CHUNK_SIZE); |
| dev->fw_data->fw_loaded = CHUNK_SIZE; |
| usb_fill_bulk_urb(dev->fw_data->fw_urb, dev->udev, |
| usb_sndbulkpipe(dev->udev, 2), |
| dev->fw_data->pfw_data, |
| CHUNK_SIZE, s2255_fwchunk_complete, |
| dev->fw_data); |
| mod_timer(&dev->timer, jiffies + HZ); |
| } |
| |
| /* standard usb probe function */ |
| static int s2255_probe(struct usb_interface *interface, |
| const struct usb_device_id *id) |
| { |
| struct s2255_dev *dev = NULL; |
| struct usb_host_interface *iface_desc; |
| struct usb_endpoint_descriptor *endpoint; |
| int i; |
| int retval = -ENOMEM; |
| __le32 *pdata; |
| int fw_size; |
| dprintk(2, "%s\n", __func__); |
| /* allocate memory for our device state and initialize it to zero */ |
| dev = kzalloc(sizeof(struct s2255_dev), GFP_KERNEL); |
| if (dev == NULL) { |
| s2255_dev_err(&interface->dev, "out of memory\n"); |
| return -ENOMEM; |
| } |
| atomic_set(&dev->num_channels, 0); |
| dev->pid = le16_to_cpu(id->idProduct); |
| dev->fw_data = kzalloc(sizeof(struct s2255_fw), GFP_KERNEL); |
| if (!dev->fw_data) |
| goto errorFWDATA1; |
| mutex_init(&dev->lock); |
| /* grab usb_device and save it */ |
| dev->udev = usb_get_dev(interface_to_usbdev(interface)); |
| if (dev->udev == NULL) { |
| dev_err(&interface->dev, "null usb device\n"); |
| retval = -ENODEV; |
| goto errorUDEV; |
| } |
| dprintk(1, "dev: %p, udev %p interface %p\n", dev, |
| dev->udev, interface); |
| dev->interface = interface; |
| /* set up the endpoint information */ |
| iface_desc = interface->cur_altsetting; |
| dprintk(1, "num endpoints %d\n", iface_desc->desc.bNumEndpoints); |
| for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { |
| endpoint = &iface_desc->endpoint[i].desc; |
| if (!dev->read_endpoint && usb_endpoint_is_bulk_in(endpoint)) { |
| /* we found the bulk in endpoint */ |
| dev->read_endpoint = endpoint->bEndpointAddress; |
| } |
| } |
| |
| if (!dev->read_endpoint) { |
| dev_err(&interface->dev, "Could not find bulk-in endpoint\n"); |
| goto errorEP; |
| } |
| init_timer(&dev->timer); |
| dev->timer.function = s2255_timer; |
| dev->timer.data = (unsigned long)dev->fw_data; |
| init_waitqueue_head(&dev->fw_data->wait_fw); |
| for (i = 0; i < MAX_CHANNELS; i++) { |
| struct s2255_channel *channel = &dev->channel[i]; |
| dev->channel[i].idx = i; |
| init_waitqueue_head(&channel->wait_setmode); |
| init_waitqueue_head(&channel->wait_vidstatus); |
| } |
| |
| dev->fw_data->fw_urb = usb_alloc_urb(0, GFP_KERNEL); |
| if (!dev->fw_data->fw_urb) { |
| dev_err(&interface->dev, "out of memory!\n"); |
| goto errorFWURB; |
| } |
| |
| dev->fw_data->pfw_data = kzalloc(CHUNK_SIZE, GFP_KERNEL); |
| if (!dev->fw_data->pfw_data) { |
| dev_err(&interface->dev, "out of memory!\n"); |
| goto errorFWDATA2; |
| } |
| /* load the first chunk */ |
| if (request_firmware(&dev->fw_data->fw, |
| FIRMWARE_FILE_NAME, &dev->udev->dev)) { |
| printk(KERN_ERR "sensoray 2255 failed to get firmware\n"); |
| goto errorREQFW; |
| } |
| /* check the firmware is valid */ |
| fw_size = dev->fw_data->fw->size; |
| pdata = (__le32 *) &dev->fw_data->fw->data[fw_size - 8]; |
| |
| if (*pdata != S2255_FW_MARKER) { |
| printk(KERN_INFO "Firmware invalid.\n"); |
| retval = -ENODEV; |
| goto errorFWMARKER; |
| } else { |
| /* make sure firmware is the latest */ |
| __le32 *pRel; |
| pRel = (__le32 *) &dev->fw_data->fw->data[fw_size - 4]; |
| printk(KERN_INFO "s2255 dsp fw version %x\n", le32_to_cpu(*pRel)); |
| dev->dsp_fw_ver = le32_to_cpu(*pRel); |
| if (dev->dsp_fw_ver < S2255_CUR_DSP_FWVER) |
| printk(KERN_INFO "s2255: f2255usb.bin out of date.\n"); |
| if (dev->pid == 0x2257 && |
| dev->dsp_fw_ver < S2255_MIN_DSP_COLORFILTER) |
| printk(KERN_WARNING "s2255: 2257 requires firmware %d" |
| " or above.\n", S2255_MIN_DSP_COLORFILTER); |
| } |
| usb_reset_device(dev->udev); |
| /* load 2255 board specific */ |
| retval = s2255_board_init(dev); |
| if (retval) |
| goto errorBOARDINIT; |
| spin_lock_init(&dev->slock); |
| s2255_fwload_start(dev, 0); |
| /* loads v4l specific */ |
| retval = s2255_probe_v4l(dev); |
| if (retval) |
| goto errorBOARDINIT; |
| dev_info(&interface->dev, "Sensoray 2255 detected\n"); |
| return 0; |
| errorBOARDINIT: |
| s2255_board_shutdown(dev); |
| errorFWMARKER: |
| release_firmware(dev->fw_data->fw); |
| errorREQFW: |
| kfree(dev->fw_data->pfw_data); |
| errorFWDATA2: |
| usb_free_urb(dev->fw_data->fw_urb); |
| errorFWURB: |
| del_timer(&dev->timer); |
| errorEP: |
| usb_put_dev(dev->udev); |
| errorUDEV: |
| kfree(dev->fw_data); |
| mutex_destroy(&dev->lock); |
| errorFWDATA1: |
| kfree(dev); |
| printk(KERN_WARNING "Sensoray 2255 driver load failed: 0x%x\n", retval); |
| return retval; |
| } |
| |
| /* disconnect routine. when board is removed physically or with rmmod */ |
| static void s2255_disconnect(struct usb_interface *interface) |
| { |
| struct s2255_dev *dev = to_s2255_dev(usb_get_intfdata(interface)); |
| int i; |
| int channels = atomic_read(&dev->num_channels); |
| mutex_lock(&dev->lock); |
| v4l2_device_disconnect(&dev->v4l2_dev); |
| mutex_unlock(&dev->lock); |
| /*see comments in the uvc_driver.c usb disconnect function */ |
| atomic_inc(&dev->num_channels); |
| /* unregister each video device. */ |
| for (i = 0; i < channels; i++) |
| video_unregister_device(&dev->channel[i].vdev); |
| /* wake up any of our timers */ |
| atomic_set(&dev->fw_data->fw_state, S2255_FW_DISCONNECTING); |
| wake_up(&dev->fw_data->wait_fw); |
| for (i = 0; i < MAX_CHANNELS; i++) { |
| dev->channel[i].setmode_ready = 1; |
| wake_up(&dev->channel[i].wait_setmode); |
| dev->channel[i].vidstatus_ready = 1; |
| wake_up(&dev->channel[i].wait_vidstatus); |
| } |
| if (atomic_dec_and_test(&dev->num_channels)) |
| s2255_destroy(dev); |
| dev_info(&interface->dev, "%s\n", __func__); |
| } |
| |
| static struct usb_driver s2255_driver = { |
| .name = S2255_DRIVER_NAME, |
| .probe = s2255_probe, |
| .disconnect = s2255_disconnect, |
| .id_table = s2255_table, |
| }; |
| |
| module_usb_driver(s2255_driver); |
| |
| MODULE_DESCRIPTION("Sensoray 2255 Video for Linux driver"); |
| MODULE_AUTHOR("Dean Anderson (Sensoray Company Inc.)"); |
| MODULE_LICENSE("GPL"); |
| MODULE_VERSION(S2255_VERSION); |
| MODULE_FIRMWARE(FIRMWARE_FILE_NAME); |