| /* |
| * i2c Support for Atmel's AT91 Two-Wire Interface (TWI) |
| * |
| * Copyright (C) 2011 Weinmann Medical GmbH |
| * Author: Nikolaus Voss <n.voss@weinmann.de> |
| * |
| * Evolved from original work by: |
| * Copyright (C) 2004 Rick Bronson |
| * Converted to 2.6 by Andrew Victor <andrew@sanpeople.com> |
| * |
| * Borrowed heavily from original work by: |
| * Copyright (C) 2000 Philip Edelbrock <phil@stimpy.netroedge.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/completion.h> |
| #include <linux/err.h> |
| #include <linux/i2c.h> |
| #include <linux/interrupt.h> |
| #include <linux/io.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/of_device.h> |
| #include <linux/of_i2c.h> |
| #include <linux/platform_device.h> |
| #include <linux/slab.h> |
| |
| #define TWI_CLK_HZ 100000 /* max 400 Kbits/s */ |
| #define AT91_I2C_TIMEOUT msecs_to_jiffies(100) /* transfer timeout */ |
| |
| /* AT91 TWI register definitions */ |
| #define AT91_TWI_CR 0x0000 /* Control Register */ |
| #define AT91_TWI_START 0x0001 /* Send a Start Condition */ |
| #define AT91_TWI_STOP 0x0002 /* Send a Stop Condition */ |
| #define AT91_TWI_MSEN 0x0004 /* Master Transfer Enable */ |
| #define AT91_TWI_SVDIS 0x0020 /* Slave Transfer Disable */ |
| #define AT91_TWI_QUICK 0x0040 /* SMBus quick command */ |
| #define AT91_TWI_SWRST 0x0080 /* Software Reset */ |
| |
| #define AT91_TWI_MMR 0x0004 /* Master Mode Register */ |
| #define AT91_TWI_IADRSZ_1 0x0100 /* Internal Device Address Size */ |
| #define AT91_TWI_MREAD 0x1000 /* Master Read Direction */ |
| |
| #define AT91_TWI_IADR 0x000c /* Internal Address Register */ |
| |
| #define AT91_TWI_CWGR 0x0010 /* Clock Waveform Generator Reg */ |
| |
| #define AT91_TWI_SR 0x0020 /* Status Register */ |
| #define AT91_TWI_TXCOMP 0x0001 /* Transmission Complete */ |
| #define AT91_TWI_RXRDY 0x0002 /* Receive Holding Register Ready */ |
| #define AT91_TWI_TXRDY 0x0004 /* Transmit Holding Register Ready */ |
| |
| #define AT91_TWI_OVRE 0x0040 /* Overrun Error */ |
| #define AT91_TWI_UNRE 0x0080 /* Underrun Error */ |
| #define AT91_TWI_NACK 0x0100 /* Not Acknowledged */ |
| |
| #define AT91_TWI_IER 0x0024 /* Interrupt Enable Register */ |
| #define AT91_TWI_IDR 0x0028 /* Interrupt Disable Register */ |
| #define AT91_TWI_IMR 0x002c /* Interrupt Mask Register */ |
| #define AT91_TWI_RHR 0x0030 /* Receive Holding Register */ |
| #define AT91_TWI_THR 0x0034 /* Transmit Holding Register */ |
| |
| struct at91_twi_pdata { |
| unsigned clk_max_div; |
| unsigned clk_offset; |
| bool has_unre_flag; |
| }; |
| |
| struct at91_twi_dev { |
| struct device *dev; |
| void __iomem *base; |
| struct completion cmd_complete; |
| struct clk *clk; |
| u8 *buf; |
| size_t buf_len; |
| struct i2c_msg *msg; |
| int irq; |
| unsigned transfer_status; |
| struct i2c_adapter adapter; |
| unsigned twi_cwgr_reg; |
| struct at91_twi_pdata *pdata; |
| }; |
| |
| static unsigned at91_twi_read(struct at91_twi_dev *dev, unsigned reg) |
| { |
| return readl_relaxed(dev->base + reg); |
| } |
| |
| static void at91_twi_write(struct at91_twi_dev *dev, unsigned reg, unsigned val) |
| { |
| writel_relaxed(val, dev->base + reg); |
| } |
| |
| static void at91_disable_twi_interrupts(struct at91_twi_dev *dev) |
| { |
| at91_twi_write(dev, AT91_TWI_IDR, |
| AT91_TWI_TXCOMP | AT91_TWI_RXRDY | AT91_TWI_TXRDY); |
| } |
| |
| static void at91_init_twi_bus(struct at91_twi_dev *dev) |
| { |
| at91_disable_twi_interrupts(dev); |
| at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_SWRST); |
| at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_MSEN); |
| at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_SVDIS); |
| at91_twi_write(dev, AT91_TWI_CWGR, dev->twi_cwgr_reg); |
| } |
| |
| /* |
| * Calculate symmetric clock as stated in datasheet: |
| * twi_clk = F_MAIN / (2 * (cdiv * (1 << ckdiv) + offset)) |
| */ |
| static void __devinit at91_calc_twi_clock(struct at91_twi_dev *dev, int twi_clk) |
| { |
| int ckdiv, cdiv, div; |
| struct at91_twi_pdata *pdata = dev->pdata; |
| int offset = pdata->clk_offset; |
| int max_ckdiv = pdata->clk_max_div; |
| |
| div = max(0, (int)DIV_ROUND_UP(clk_get_rate(dev->clk), |
| 2 * twi_clk) - offset); |
| ckdiv = fls(div >> 8); |
| cdiv = div >> ckdiv; |
| |
| if (ckdiv > max_ckdiv) { |
| dev_warn(dev->dev, "%d exceeds ckdiv max value which is %d.\n", |
| ckdiv, max_ckdiv); |
| ckdiv = max_ckdiv; |
| cdiv = 255; |
| } |
| |
| dev->twi_cwgr_reg = (ckdiv << 16) | (cdiv << 8) | cdiv; |
| dev_dbg(dev->dev, "cdiv %d ckdiv %d\n", cdiv, ckdiv); |
| } |
| |
| static void at91_twi_write_next_byte(struct at91_twi_dev *dev) |
| { |
| if (dev->buf_len <= 0) |
| return; |
| |
| at91_twi_write(dev, AT91_TWI_THR, *dev->buf); |
| |
| /* send stop when last byte has been written */ |
| if (--dev->buf_len == 0) |
| at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_STOP); |
| |
| dev_dbg(dev->dev, "wrote 0x%x, to go %d\n", *dev->buf, dev->buf_len); |
| |
| ++dev->buf; |
| } |
| |
| static void at91_twi_read_next_byte(struct at91_twi_dev *dev) |
| { |
| if (dev->buf_len <= 0) |
| return; |
| |
| *dev->buf = at91_twi_read(dev, AT91_TWI_RHR) & 0xff; |
| --dev->buf_len; |
| |
| /* handle I2C_SMBUS_BLOCK_DATA */ |
| if (unlikely(dev->msg->flags & I2C_M_RECV_LEN)) { |
| dev->msg->flags &= ~I2C_M_RECV_LEN; |
| dev->buf_len += *dev->buf; |
| dev->msg->len = dev->buf_len + 1; |
| dev_dbg(dev->dev, "received block length %d\n", dev->buf_len); |
| } |
| |
| /* send stop if second but last byte has been read */ |
| if (dev->buf_len == 1) |
| at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_STOP); |
| |
| dev_dbg(dev->dev, "read 0x%x, to go %d\n", *dev->buf, dev->buf_len); |
| |
| ++dev->buf; |
| } |
| |
| static irqreturn_t atmel_twi_interrupt(int irq, void *dev_id) |
| { |
| struct at91_twi_dev *dev = dev_id; |
| const unsigned status = at91_twi_read(dev, AT91_TWI_SR); |
| const unsigned irqstatus = status & at91_twi_read(dev, AT91_TWI_IMR); |
| |
| if (!irqstatus) |
| return IRQ_NONE; |
| else if (irqstatus & AT91_TWI_RXRDY) |
| at91_twi_read_next_byte(dev); |
| else if (irqstatus & AT91_TWI_TXRDY) |
| at91_twi_write_next_byte(dev); |
| |
| /* catch error flags */ |
| dev->transfer_status |= status; |
| |
| if (irqstatus & AT91_TWI_TXCOMP) { |
| at91_disable_twi_interrupts(dev); |
| complete(&dev->cmd_complete); |
| } |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int at91_do_twi_transfer(struct at91_twi_dev *dev) |
| { |
| int ret; |
| bool has_unre_flag = dev->pdata->has_unre_flag; |
| |
| dev_dbg(dev->dev, "transfer: %s %d bytes.\n", |
| (dev->msg->flags & I2C_M_RD) ? "read" : "write", dev->buf_len); |
| |
| INIT_COMPLETION(dev->cmd_complete); |
| dev->transfer_status = 0; |
| |
| if (!dev->buf_len) { |
| at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_QUICK); |
| at91_twi_write(dev, AT91_TWI_IER, AT91_TWI_TXCOMP); |
| } else if (dev->msg->flags & I2C_M_RD) { |
| unsigned start_flags = AT91_TWI_START; |
| |
| if (at91_twi_read(dev, AT91_TWI_SR) & AT91_TWI_RXRDY) { |
| dev_err(dev->dev, "RXRDY still set!"); |
| at91_twi_read(dev, AT91_TWI_RHR); |
| } |
| |
| /* if only one byte is to be read, immediately stop transfer */ |
| if (dev->buf_len <= 1 && !(dev->msg->flags & I2C_M_RECV_LEN)) |
| start_flags |= AT91_TWI_STOP; |
| at91_twi_write(dev, AT91_TWI_CR, start_flags); |
| at91_twi_write(dev, AT91_TWI_IER, |
| AT91_TWI_TXCOMP | AT91_TWI_RXRDY); |
| } else { |
| at91_twi_write_next_byte(dev); |
| at91_twi_write(dev, AT91_TWI_IER, |
| AT91_TWI_TXCOMP | AT91_TWI_TXRDY); |
| } |
| |
| ret = wait_for_completion_interruptible_timeout(&dev->cmd_complete, |
| dev->adapter.timeout); |
| if (ret == 0) { |
| dev_err(dev->dev, "controller timed out\n"); |
| at91_init_twi_bus(dev); |
| return -ETIMEDOUT; |
| } |
| if (dev->transfer_status & AT91_TWI_NACK) { |
| dev_dbg(dev->dev, "received nack\n"); |
| return -EREMOTEIO; |
| } |
| if (dev->transfer_status & AT91_TWI_OVRE) { |
| dev_err(dev->dev, "overrun while reading\n"); |
| return -EIO; |
| } |
| if (has_unre_flag && dev->transfer_status & AT91_TWI_UNRE) { |
| dev_err(dev->dev, "underrun while writing\n"); |
| return -EIO; |
| } |
| dev_dbg(dev->dev, "transfer complete\n"); |
| |
| return 0; |
| } |
| |
| static int at91_twi_xfer(struct i2c_adapter *adap, struct i2c_msg *msg, int num) |
| { |
| struct at91_twi_dev *dev = i2c_get_adapdata(adap); |
| int ret; |
| unsigned int_addr_flag = 0; |
| struct i2c_msg *m_start = msg; |
| |
| dev_dbg(&adap->dev, "at91_xfer: processing %d messages:\n", num); |
| |
| /* |
| * The hardware can handle at most two messages concatenated by a |
| * repeated start via it's internal address feature. |
| */ |
| if (num > 2) { |
| dev_err(dev->dev, |
| "cannot handle more than two concatenated messages.\n"); |
| return 0; |
| } else if (num == 2) { |
| int internal_address = 0; |
| int i; |
| |
| if (msg->flags & I2C_M_RD) { |
| dev_err(dev->dev, "first transfer must be write.\n"); |
| return -EINVAL; |
| } |
| if (msg->len > 3) { |
| dev_err(dev->dev, "first message size must be <= 3.\n"); |
| return -EINVAL; |
| } |
| |
| /* 1st msg is put into the internal address, start with 2nd */ |
| m_start = &msg[1]; |
| for (i = 0; i < msg->len; ++i) { |
| const unsigned addr = msg->buf[msg->len - 1 - i]; |
| |
| internal_address |= addr << (8 * i); |
| int_addr_flag += AT91_TWI_IADRSZ_1; |
| } |
| at91_twi_write(dev, AT91_TWI_IADR, internal_address); |
| } |
| |
| at91_twi_write(dev, AT91_TWI_MMR, (m_start->addr << 16) | int_addr_flag |
| | ((m_start->flags & I2C_M_RD) ? AT91_TWI_MREAD : 0)); |
| |
| dev->buf_len = m_start->len; |
| dev->buf = m_start->buf; |
| dev->msg = m_start; |
| |
| ret = at91_do_twi_transfer(dev); |
| |
| return (ret < 0) ? ret : num; |
| } |
| |
| static u32 at91_twi_func(struct i2c_adapter *adapter) |
| { |
| return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL |
| | I2C_FUNC_SMBUS_READ_BLOCK_DATA; |
| } |
| |
| static struct i2c_algorithm at91_twi_algorithm = { |
| .master_xfer = at91_twi_xfer, |
| .functionality = at91_twi_func, |
| }; |
| |
| static struct at91_twi_pdata at91rm9200_config = { |
| .clk_max_div = 5, |
| .clk_offset = 3, |
| .has_unre_flag = true, |
| }; |
| |
| static struct at91_twi_pdata at91sam9261_config = { |
| .clk_max_div = 5, |
| .clk_offset = 4, |
| .has_unre_flag = false, |
| }; |
| |
| static struct at91_twi_pdata at91sam9260_config = { |
| .clk_max_div = 7, |
| .clk_offset = 4, |
| .has_unre_flag = false, |
| }; |
| |
| static struct at91_twi_pdata at91sam9g20_config = { |
| .clk_max_div = 7, |
| .clk_offset = 4, |
| .has_unre_flag = false, |
| }; |
| |
| static struct at91_twi_pdata at91sam9g10_config = { |
| .clk_max_div = 7, |
| .clk_offset = 4, |
| .has_unre_flag = false, |
| }; |
| |
| static struct at91_twi_pdata at91sam9x5_config = { |
| .clk_max_div = 7, |
| .clk_offset = 4, |
| .has_unre_flag = false, |
| }; |
| |
| static const struct platform_device_id at91_twi_devtypes[] = { |
| { |
| .name = "i2c-at91rm9200", |
| .driver_data = (unsigned long) &at91rm9200_config, |
| }, { |
| .name = "i2c-at91sam9261", |
| .driver_data = (unsigned long) &at91sam9261_config, |
| }, { |
| .name = "i2c-at91sam9260", |
| .driver_data = (unsigned long) &at91sam9260_config, |
| }, { |
| .name = "i2c-at91sam9g20", |
| .driver_data = (unsigned long) &at91sam9g20_config, |
| }, { |
| .name = "i2c-at91sam9g10", |
| .driver_data = (unsigned long) &at91sam9g10_config, |
| }, { |
| /* sentinel */ |
| } |
| }; |
| |
| #if defined(CONFIG_OF) |
| static const struct of_device_id atmel_twi_dt_ids[] = { |
| { |
| .compatible = "atmel,at91sam9260-i2c", |
| .data = &at91sam9260_config, |
| } , { |
| .compatible = "atmel,at91sam9g20-i2c", |
| .data = &at91sam9g20_config, |
| } , { |
| .compatible = "atmel,at91sam9g10-i2c", |
| .data = &at91sam9g10_config, |
| }, { |
| .compatible = "atmel,at91sam9x5-i2c", |
| .data = &at91sam9x5_config, |
| }, { |
| /* sentinel */ |
| } |
| }; |
| MODULE_DEVICE_TABLE(of, atmel_twi_dt_ids); |
| #else |
| #define atmel_twi_dt_ids NULL |
| #endif |
| |
| static struct at91_twi_pdata * __devinit at91_twi_get_driver_data( |
| struct platform_device *pdev) |
| { |
| if (pdev->dev.of_node) { |
| const struct of_device_id *match; |
| match = of_match_node(atmel_twi_dt_ids, pdev->dev.of_node); |
| if (!match) |
| return NULL; |
| return match->data; |
| } |
| return (struct at91_twi_pdata *) platform_get_device_id(pdev)->driver_data; |
| } |
| |
| static int __devinit at91_twi_probe(struct platform_device *pdev) |
| { |
| struct at91_twi_dev *dev; |
| struct resource *mem; |
| int rc; |
| |
| dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL); |
| if (!dev) |
| return -ENOMEM; |
| init_completion(&dev->cmd_complete); |
| dev->dev = &pdev->dev; |
| |
| mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (!mem) |
| return -ENODEV; |
| |
| dev->pdata = at91_twi_get_driver_data(pdev); |
| if (!dev->pdata) |
| return -ENODEV; |
| |
| dev->base = devm_request_and_ioremap(&pdev->dev, mem); |
| if (!dev->base) |
| return -EBUSY; |
| |
| dev->irq = platform_get_irq(pdev, 0); |
| if (dev->irq < 0) |
| return dev->irq; |
| |
| rc = devm_request_irq(&pdev->dev, dev->irq, atmel_twi_interrupt, 0, |
| dev_name(dev->dev), dev); |
| if (rc) { |
| dev_err(dev->dev, "Cannot get irq %d: %d\n", dev->irq, rc); |
| return rc; |
| } |
| |
| platform_set_drvdata(pdev, dev); |
| |
| dev->clk = devm_clk_get(dev->dev, NULL); |
| if (IS_ERR(dev->clk)) { |
| dev_err(dev->dev, "no clock defined\n"); |
| return -ENODEV; |
| } |
| clk_prepare_enable(dev->clk); |
| |
| at91_calc_twi_clock(dev, TWI_CLK_HZ); |
| at91_init_twi_bus(dev); |
| |
| snprintf(dev->adapter.name, sizeof(dev->adapter.name), "AT91"); |
| i2c_set_adapdata(&dev->adapter, dev); |
| dev->adapter.owner = THIS_MODULE; |
| dev->adapter.class = I2C_CLASS_HWMON; |
| dev->adapter.algo = &at91_twi_algorithm; |
| dev->adapter.dev.parent = dev->dev; |
| dev->adapter.nr = pdev->id; |
| dev->adapter.timeout = AT91_I2C_TIMEOUT; |
| dev->adapter.dev.of_node = pdev->dev.of_node; |
| |
| rc = i2c_add_numbered_adapter(&dev->adapter); |
| if (rc) { |
| dev_err(dev->dev, "Adapter %s registration failed\n", |
| dev->adapter.name); |
| clk_disable_unprepare(dev->clk); |
| return rc; |
| } |
| |
| of_i2c_register_devices(&dev->adapter); |
| |
| dev_info(dev->dev, "AT91 i2c bus driver.\n"); |
| return 0; |
| } |
| |
| static int __devexit at91_twi_remove(struct platform_device *pdev) |
| { |
| struct at91_twi_dev *dev = platform_get_drvdata(pdev); |
| int rc; |
| |
| rc = i2c_del_adapter(&dev->adapter); |
| clk_disable_unprepare(dev->clk); |
| |
| return rc; |
| } |
| |
| #ifdef CONFIG_PM |
| |
| static int at91_twi_runtime_suspend(struct device *dev) |
| { |
| struct at91_twi_dev *twi_dev = dev_get_drvdata(dev); |
| |
| clk_disable(twi_dev->clk); |
| |
| return 0; |
| } |
| |
| static int at91_twi_runtime_resume(struct device *dev) |
| { |
| struct at91_twi_dev *twi_dev = dev_get_drvdata(dev); |
| |
| return clk_enable(twi_dev->clk); |
| } |
| |
| static const struct dev_pm_ops at91_twi_pm = { |
| .runtime_suspend = at91_twi_runtime_suspend, |
| .runtime_resume = at91_twi_runtime_resume, |
| }; |
| |
| #define at91_twi_pm_ops (&at91_twi_pm) |
| #else |
| #define at91_twi_pm_ops NULL |
| #endif |
| |
| static struct platform_driver at91_twi_driver = { |
| .probe = at91_twi_probe, |
| .remove = __devexit_p(at91_twi_remove), |
| .id_table = at91_twi_devtypes, |
| .driver = { |
| .name = "at91_i2c", |
| .owner = THIS_MODULE, |
| .of_match_table = atmel_twi_dt_ids, |
| .pm = at91_twi_pm_ops, |
| }, |
| }; |
| |
| static int __init at91_twi_init(void) |
| { |
| return platform_driver_register(&at91_twi_driver); |
| } |
| |
| static void __exit at91_twi_exit(void) |
| { |
| platform_driver_unregister(&at91_twi_driver); |
| } |
| |
| subsys_initcall(at91_twi_init); |
| module_exit(at91_twi_exit); |
| |
| MODULE_AUTHOR("Nikolaus Voss <n.voss@weinmann.de>"); |
| MODULE_DESCRIPTION("I2C (TWI) driver for Atmel AT91"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("platform:at91_i2c"); |