| /* |
| * Copyright (C) 2012 Texas Instruments |
| * Author: Rob Clark <robdclark@gmail.com> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 as published by |
| * the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * You should have received a copy of the GNU General Public License along with |
| * this program. If not, see <http://www.gnu.org/licenses/>. |
| */ |
| |
| #include "drm_flip_work.h" |
| #include <drm/drm_plane_helper.h> |
| |
| #include "tilcdc_drv.h" |
| #include "tilcdc_regs.h" |
| |
| #define TILCDC_VBLANK_SAFETY_THRESHOLD_US 1000 |
| |
| struct tilcdc_crtc { |
| struct drm_crtc base; |
| |
| const struct tilcdc_panel_info *info; |
| struct drm_pending_vblank_event *event; |
| int dpms; |
| wait_queue_head_t frame_done_wq; |
| bool frame_done; |
| spinlock_t irq_lock; |
| |
| ktime_t last_vblank; |
| |
| struct drm_framebuffer *curr_fb; |
| struct drm_framebuffer *next_fb; |
| |
| /* for deferred fb unref's: */ |
| struct drm_flip_work unref_work; |
| |
| /* Only set if an external encoder is connected */ |
| bool simulate_vesa_sync; |
| |
| int sync_lost_count; |
| bool frame_intact; |
| }; |
| #define to_tilcdc_crtc(x) container_of(x, struct tilcdc_crtc, base) |
| |
| static void unref_worker(struct drm_flip_work *work, void *val) |
| { |
| struct tilcdc_crtc *tilcdc_crtc = |
| container_of(work, struct tilcdc_crtc, unref_work); |
| struct drm_device *dev = tilcdc_crtc->base.dev; |
| |
| mutex_lock(&dev->mode_config.mutex); |
| drm_framebuffer_unreference(val); |
| mutex_unlock(&dev->mode_config.mutex); |
| } |
| |
| static void set_scanout(struct drm_crtc *crtc, struct drm_framebuffer *fb) |
| { |
| struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc); |
| struct drm_device *dev = crtc->dev; |
| struct drm_gem_cma_object *gem; |
| unsigned int depth, bpp; |
| dma_addr_t start, end; |
| |
| drm_fb_get_bpp_depth(fb->pixel_format, &depth, &bpp); |
| gem = drm_fb_cma_get_gem_obj(fb, 0); |
| |
| start = gem->paddr + fb->offsets[0] + |
| crtc->y * fb->pitches[0] + |
| crtc->x * bpp / 8; |
| |
| end = start + (crtc->mode.vdisplay * fb->pitches[0]); |
| |
| tilcdc_write(dev, LCDC_DMA_FB_BASE_ADDR_0_REG, start); |
| tilcdc_write(dev, LCDC_DMA_FB_CEILING_ADDR_0_REG, end); |
| |
| if (tilcdc_crtc->curr_fb) |
| drm_flip_work_queue(&tilcdc_crtc->unref_work, |
| tilcdc_crtc->curr_fb); |
| |
| tilcdc_crtc->curr_fb = fb; |
| } |
| |
| static void reset(struct drm_crtc *crtc) |
| { |
| struct drm_device *dev = crtc->dev; |
| struct tilcdc_drm_private *priv = dev->dev_private; |
| |
| if (priv->rev != 2) |
| return; |
| |
| tilcdc_set(dev, LCDC_CLK_RESET_REG, LCDC_CLK_MAIN_RESET); |
| usleep_range(250, 1000); |
| tilcdc_clear(dev, LCDC_CLK_RESET_REG, LCDC_CLK_MAIN_RESET); |
| } |
| |
| static void start(struct drm_crtc *crtc) |
| { |
| struct drm_device *dev = crtc->dev; |
| |
| reset(crtc); |
| |
| tilcdc_clear(dev, LCDC_DMA_CTRL_REG, LCDC_DUAL_FRAME_BUFFER_ENABLE); |
| tilcdc_set(dev, LCDC_RASTER_CTRL_REG, LCDC_PALETTE_LOAD_MODE(DATA_ONLY)); |
| tilcdc_set(dev, LCDC_RASTER_CTRL_REG, LCDC_RASTER_ENABLE); |
| } |
| |
| static void stop(struct drm_crtc *crtc) |
| { |
| struct drm_device *dev = crtc->dev; |
| |
| tilcdc_clear(dev, LCDC_RASTER_CTRL_REG, LCDC_RASTER_ENABLE); |
| } |
| |
| static void tilcdc_crtc_destroy(struct drm_crtc *crtc) |
| { |
| struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc); |
| |
| tilcdc_crtc_dpms(crtc, DRM_MODE_DPMS_OFF); |
| |
| of_node_put(crtc->port); |
| drm_crtc_cleanup(crtc); |
| drm_flip_work_cleanup(&tilcdc_crtc->unref_work); |
| } |
| |
| static int tilcdc_verify_fb(struct drm_crtc *crtc, struct drm_framebuffer *fb) |
| { |
| struct drm_device *dev = crtc->dev; |
| unsigned int depth, bpp; |
| |
| drm_fb_get_bpp_depth(fb->pixel_format, &depth, &bpp); |
| |
| if (fb->pitches[0] != crtc->mode.hdisplay * bpp / 8) { |
| dev_err(dev->dev, |
| "Invalid pitch: fb and crtc widths must be the same"); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int tilcdc_crtc_page_flip(struct drm_crtc *crtc, |
| struct drm_framebuffer *fb, |
| struct drm_pending_vblank_event *event, |
| uint32_t page_flip_flags) |
| { |
| struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc); |
| struct drm_device *dev = crtc->dev; |
| int r; |
| unsigned long flags; |
| s64 tdiff; |
| ktime_t next_vblank; |
| |
| r = tilcdc_verify_fb(crtc, fb); |
| if (r) |
| return r; |
| |
| if (tilcdc_crtc->event) { |
| dev_err(dev->dev, "already pending page flip!\n"); |
| return -EBUSY; |
| } |
| |
| drm_framebuffer_reference(fb); |
| |
| crtc->primary->fb = fb; |
| |
| pm_runtime_get_sync(dev->dev); |
| |
| spin_lock_irqsave(&tilcdc_crtc->irq_lock, flags); |
| |
| next_vblank = ktime_add_us(tilcdc_crtc->last_vblank, |
| 1000000 / crtc->hwmode.vrefresh); |
| |
| tdiff = ktime_to_us(ktime_sub(next_vblank, ktime_get())); |
| |
| if (tdiff >= TILCDC_VBLANK_SAFETY_THRESHOLD_US) |
| set_scanout(crtc, fb); |
| else |
| tilcdc_crtc->next_fb = fb; |
| |
| tilcdc_crtc->event = event; |
| |
| spin_unlock_irqrestore(&tilcdc_crtc->irq_lock, flags); |
| |
| pm_runtime_put_sync(dev->dev); |
| |
| return 0; |
| } |
| |
| void tilcdc_crtc_dpms(struct drm_crtc *crtc, int mode) |
| { |
| struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc); |
| struct drm_device *dev = crtc->dev; |
| struct tilcdc_drm_private *priv = dev->dev_private; |
| |
| /* we really only care about on or off: */ |
| if (mode != DRM_MODE_DPMS_ON) |
| mode = DRM_MODE_DPMS_OFF; |
| |
| if (tilcdc_crtc->dpms == mode) |
| return; |
| |
| tilcdc_crtc->dpms = mode; |
| |
| if (mode == DRM_MODE_DPMS_ON) { |
| pm_runtime_get_sync(dev->dev); |
| start(crtc); |
| } else { |
| tilcdc_crtc->frame_done = false; |
| stop(crtc); |
| |
| /* |
| * if necessary wait for framedone irq which will still come |
| * before putting things to sleep.. |
| */ |
| if (priv->rev == 2) { |
| int ret = wait_event_timeout( |
| tilcdc_crtc->frame_done_wq, |
| tilcdc_crtc->frame_done, |
| msecs_to_jiffies(50)); |
| if (ret == 0) |
| dev_err(dev->dev, "timeout waiting for framedone\n"); |
| } |
| |
| pm_runtime_put_sync(dev->dev); |
| |
| if (tilcdc_crtc->next_fb) { |
| drm_flip_work_queue(&tilcdc_crtc->unref_work, |
| tilcdc_crtc->next_fb); |
| tilcdc_crtc->next_fb = NULL; |
| } |
| |
| if (tilcdc_crtc->curr_fb) { |
| drm_flip_work_queue(&tilcdc_crtc->unref_work, |
| tilcdc_crtc->curr_fb); |
| tilcdc_crtc->curr_fb = NULL; |
| } |
| |
| drm_flip_work_commit(&tilcdc_crtc->unref_work, priv->wq); |
| } |
| } |
| |
| static bool tilcdc_crtc_mode_fixup(struct drm_crtc *crtc, |
| const struct drm_display_mode *mode, |
| struct drm_display_mode *adjusted_mode) |
| { |
| struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc); |
| |
| if (!tilcdc_crtc->simulate_vesa_sync) |
| return true; |
| |
| /* |
| * tilcdc does not generate VESA-compliant sync but aligns |
| * VS on the second edge of HS instead of first edge. |
| * We use adjusted_mode, to fixup sync by aligning both rising |
| * edges and add HSKEW offset to fix the sync. |
| */ |
| adjusted_mode->hskew = mode->hsync_end - mode->hsync_start; |
| adjusted_mode->flags |= DRM_MODE_FLAG_HSKEW; |
| |
| if (mode->flags & DRM_MODE_FLAG_NHSYNC) { |
| adjusted_mode->flags |= DRM_MODE_FLAG_PHSYNC; |
| adjusted_mode->flags &= ~DRM_MODE_FLAG_NHSYNC; |
| } else { |
| adjusted_mode->flags |= DRM_MODE_FLAG_NHSYNC; |
| adjusted_mode->flags &= ~DRM_MODE_FLAG_PHSYNC; |
| } |
| |
| return true; |
| } |
| |
| static void tilcdc_crtc_prepare(struct drm_crtc *crtc) |
| { |
| tilcdc_crtc_dpms(crtc, DRM_MODE_DPMS_OFF); |
| } |
| |
| static void tilcdc_crtc_commit(struct drm_crtc *crtc) |
| { |
| tilcdc_crtc_dpms(crtc, DRM_MODE_DPMS_ON); |
| } |
| |
| static int tilcdc_crtc_mode_set(struct drm_crtc *crtc, |
| struct drm_display_mode *mode, |
| struct drm_display_mode *adjusted_mode, |
| int x, int y, |
| struct drm_framebuffer *old_fb) |
| { |
| struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc); |
| struct drm_device *dev = crtc->dev; |
| struct tilcdc_drm_private *priv = dev->dev_private; |
| const struct tilcdc_panel_info *info = tilcdc_crtc->info; |
| uint32_t reg, hbp, hfp, hsw, vbp, vfp, vsw; |
| int ret; |
| |
| ret = tilcdc_crtc_mode_valid(crtc, mode); |
| if (WARN_ON(ret)) |
| return ret; |
| |
| if (WARN_ON(!info)) |
| return -EINVAL; |
| |
| ret = tilcdc_verify_fb(crtc, crtc->primary->fb); |
| if (ret) |
| return ret; |
| |
| pm_runtime_get_sync(dev->dev); |
| |
| /* Configure the Burst Size and fifo threshold of DMA: */ |
| reg = tilcdc_read(dev, LCDC_DMA_CTRL_REG) & ~0x00000770; |
| switch (info->dma_burst_sz) { |
| case 1: |
| reg |= LCDC_DMA_BURST_SIZE(LCDC_DMA_BURST_1); |
| break; |
| case 2: |
| reg |= LCDC_DMA_BURST_SIZE(LCDC_DMA_BURST_2); |
| break; |
| case 4: |
| reg |= LCDC_DMA_BURST_SIZE(LCDC_DMA_BURST_4); |
| break; |
| case 8: |
| reg |= LCDC_DMA_BURST_SIZE(LCDC_DMA_BURST_8); |
| break; |
| case 16: |
| reg |= LCDC_DMA_BURST_SIZE(LCDC_DMA_BURST_16); |
| break; |
| default: |
| return -EINVAL; |
| } |
| reg |= (info->fifo_th << 8); |
| tilcdc_write(dev, LCDC_DMA_CTRL_REG, reg); |
| |
| /* Configure timings: */ |
| hbp = mode->htotal - mode->hsync_end; |
| hfp = mode->hsync_start - mode->hdisplay; |
| hsw = mode->hsync_end - mode->hsync_start; |
| vbp = mode->vtotal - mode->vsync_end; |
| vfp = mode->vsync_start - mode->vdisplay; |
| vsw = mode->vsync_end - mode->vsync_start; |
| |
| DBG("%dx%d, hbp=%u, hfp=%u, hsw=%u, vbp=%u, vfp=%u, vsw=%u", |
| mode->hdisplay, mode->vdisplay, hbp, hfp, hsw, vbp, vfp, vsw); |
| |
| /* Configure the AC Bias Period and Number of Transitions per Interrupt: */ |
| reg = tilcdc_read(dev, LCDC_RASTER_TIMING_2_REG) & ~0x000fff00; |
| reg |= LCDC_AC_BIAS_FREQUENCY(info->ac_bias) | |
| LCDC_AC_BIAS_TRANSITIONS_PER_INT(info->ac_bias_intrpt); |
| |
| /* |
| * subtract one from hfp, hbp, hsw because the hardware uses |
| * a value of 0 as 1 |
| */ |
| if (priv->rev == 2) { |
| /* clear bits we're going to set */ |
| reg &= ~0x78000033; |
| reg |= ((hfp-1) & 0x300) >> 8; |
| reg |= ((hbp-1) & 0x300) >> 4; |
| reg |= ((hsw-1) & 0x3c0) << 21; |
| } |
| tilcdc_write(dev, LCDC_RASTER_TIMING_2_REG, reg); |
| |
| reg = (((mode->hdisplay >> 4) - 1) << 4) | |
| (((hbp-1) & 0xff) << 24) | |
| (((hfp-1) & 0xff) << 16) | |
| (((hsw-1) & 0x3f) << 10); |
| if (priv->rev == 2) |
| reg |= (((mode->hdisplay >> 4) - 1) & 0x40) >> 3; |
| tilcdc_write(dev, LCDC_RASTER_TIMING_0_REG, reg); |
| |
| reg = ((mode->vdisplay - 1) & 0x3ff) | |
| ((vbp & 0xff) << 24) | |
| ((vfp & 0xff) << 16) | |
| (((vsw-1) & 0x3f) << 10); |
| tilcdc_write(dev, LCDC_RASTER_TIMING_1_REG, reg); |
| |
| /* |
| * be sure to set Bit 10 for the V2 LCDC controller, |
| * otherwise limited to 1024 pixels width, stopping |
| * 1920x1080 being suppoted. |
| */ |
| if (priv->rev == 2) { |
| if ((mode->vdisplay - 1) & 0x400) { |
| tilcdc_set(dev, LCDC_RASTER_TIMING_2_REG, |
| LCDC_LPP_B10); |
| } else { |
| tilcdc_clear(dev, LCDC_RASTER_TIMING_2_REG, |
| LCDC_LPP_B10); |
| } |
| } |
| |
| /* Configure display type: */ |
| reg = tilcdc_read(dev, LCDC_RASTER_CTRL_REG) & |
| ~(LCDC_TFT_MODE | LCDC_MONO_8BIT_MODE | LCDC_MONOCHROME_MODE | |
| LCDC_V2_TFT_24BPP_MODE | LCDC_V2_TFT_24BPP_UNPACK | 0x000ff000); |
| reg |= LCDC_TFT_MODE; /* no monochrome/passive support */ |
| if (info->tft_alt_mode) |
| reg |= LCDC_TFT_ALT_ENABLE; |
| if (priv->rev == 2) { |
| unsigned int depth, bpp; |
| |
| drm_fb_get_bpp_depth(crtc->primary->fb->pixel_format, &depth, &bpp); |
| switch (bpp) { |
| case 16: |
| break; |
| case 32: |
| reg |= LCDC_V2_TFT_24BPP_UNPACK; |
| /* fallthrough */ |
| case 24: |
| reg |= LCDC_V2_TFT_24BPP_MODE; |
| break; |
| default: |
| dev_err(dev->dev, "invalid pixel format\n"); |
| return -EINVAL; |
| } |
| } |
| reg |= info->fdd < 12; |
| tilcdc_write(dev, LCDC_RASTER_CTRL_REG, reg); |
| |
| if (info->invert_pxl_clk) |
| tilcdc_set(dev, LCDC_RASTER_TIMING_2_REG, LCDC_INVERT_PIXEL_CLOCK); |
| else |
| tilcdc_clear(dev, LCDC_RASTER_TIMING_2_REG, LCDC_INVERT_PIXEL_CLOCK); |
| |
| if (info->sync_ctrl) |
| tilcdc_set(dev, LCDC_RASTER_TIMING_2_REG, LCDC_SYNC_CTRL); |
| else |
| tilcdc_clear(dev, LCDC_RASTER_TIMING_2_REG, LCDC_SYNC_CTRL); |
| |
| if (info->sync_edge) |
| tilcdc_set(dev, LCDC_RASTER_TIMING_2_REG, LCDC_SYNC_EDGE); |
| else |
| tilcdc_clear(dev, LCDC_RASTER_TIMING_2_REG, LCDC_SYNC_EDGE); |
| |
| /* |
| * use value from adjusted_mode here as this might have been |
| * changed as part of the fixup for slave encoders to solve the |
| * issue where tilcdc timings are not VESA compliant |
| */ |
| if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC) |
| tilcdc_set(dev, LCDC_RASTER_TIMING_2_REG, LCDC_INVERT_HSYNC); |
| else |
| tilcdc_clear(dev, LCDC_RASTER_TIMING_2_REG, LCDC_INVERT_HSYNC); |
| |
| if (mode->flags & DRM_MODE_FLAG_NVSYNC) |
| tilcdc_set(dev, LCDC_RASTER_TIMING_2_REG, LCDC_INVERT_VSYNC); |
| else |
| tilcdc_clear(dev, LCDC_RASTER_TIMING_2_REG, LCDC_INVERT_VSYNC); |
| |
| if (info->raster_order) |
| tilcdc_set(dev, LCDC_RASTER_CTRL_REG, LCDC_RASTER_ORDER); |
| else |
| tilcdc_clear(dev, LCDC_RASTER_CTRL_REG, LCDC_RASTER_ORDER); |
| |
| drm_framebuffer_reference(crtc->primary->fb); |
| |
| set_scanout(crtc, crtc->primary->fb); |
| |
| tilcdc_crtc_update_clk(crtc); |
| |
| pm_runtime_put_sync(dev->dev); |
| |
| return 0; |
| } |
| |
| static int tilcdc_crtc_mode_set_base(struct drm_crtc *crtc, int x, int y, |
| struct drm_framebuffer *old_fb) |
| { |
| struct drm_device *dev = crtc->dev; |
| int r; |
| |
| r = tilcdc_verify_fb(crtc, crtc->primary->fb); |
| if (r) |
| return r; |
| |
| drm_framebuffer_reference(crtc->primary->fb); |
| |
| pm_runtime_get_sync(dev->dev); |
| |
| set_scanout(crtc, crtc->primary->fb); |
| |
| pm_runtime_put_sync(dev->dev); |
| |
| return 0; |
| } |
| |
| static const struct drm_crtc_funcs tilcdc_crtc_funcs = { |
| .destroy = tilcdc_crtc_destroy, |
| .set_config = drm_crtc_helper_set_config, |
| .page_flip = tilcdc_crtc_page_flip, |
| }; |
| |
| static const struct drm_crtc_helper_funcs tilcdc_crtc_helper_funcs = { |
| .dpms = tilcdc_crtc_dpms, |
| .mode_fixup = tilcdc_crtc_mode_fixup, |
| .prepare = tilcdc_crtc_prepare, |
| .commit = tilcdc_crtc_commit, |
| .mode_set = tilcdc_crtc_mode_set, |
| .mode_set_base = tilcdc_crtc_mode_set_base, |
| }; |
| |
| int tilcdc_crtc_max_width(struct drm_crtc *crtc) |
| { |
| struct drm_device *dev = crtc->dev; |
| struct tilcdc_drm_private *priv = dev->dev_private; |
| int max_width = 0; |
| |
| if (priv->rev == 1) |
| max_width = 1024; |
| else if (priv->rev == 2) |
| max_width = 2048; |
| |
| return max_width; |
| } |
| |
| int tilcdc_crtc_mode_valid(struct drm_crtc *crtc, struct drm_display_mode *mode) |
| { |
| struct tilcdc_drm_private *priv = crtc->dev->dev_private; |
| unsigned int bandwidth; |
| uint32_t hbp, hfp, hsw, vbp, vfp, vsw; |
| |
| /* |
| * check to see if the width is within the range that |
| * the LCD Controller physically supports |
| */ |
| if (mode->hdisplay > tilcdc_crtc_max_width(crtc)) |
| return MODE_VIRTUAL_X; |
| |
| /* width must be multiple of 16 */ |
| if (mode->hdisplay & 0xf) |
| return MODE_VIRTUAL_X; |
| |
| if (mode->vdisplay > 2048) |
| return MODE_VIRTUAL_Y; |
| |
| DBG("Processing mode %dx%d@%d with pixel clock %d", |
| mode->hdisplay, mode->vdisplay, |
| drm_mode_vrefresh(mode), mode->clock); |
| |
| hbp = mode->htotal - mode->hsync_end; |
| hfp = mode->hsync_start - mode->hdisplay; |
| hsw = mode->hsync_end - mode->hsync_start; |
| vbp = mode->vtotal - mode->vsync_end; |
| vfp = mode->vsync_start - mode->vdisplay; |
| vsw = mode->vsync_end - mode->vsync_start; |
| |
| if ((hbp-1) & ~0x3ff) { |
| DBG("Pruning mode: Horizontal Back Porch out of range"); |
| return MODE_HBLANK_WIDE; |
| } |
| |
| if ((hfp-1) & ~0x3ff) { |
| DBG("Pruning mode: Horizontal Front Porch out of range"); |
| return MODE_HBLANK_WIDE; |
| } |
| |
| if ((hsw-1) & ~0x3ff) { |
| DBG("Pruning mode: Horizontal Sync Width out of range"); |
| return MODE_HSYNC_WIDE; |
| } |
| |
| if (vbp & ~0xff) { |
| DBG("Pruning mode: Vertical Back Porch out of range"); |
| return MODE_VBLANK_WIDE; |
| } |
| |
| if (vfp & ~0xff) { |
| DBG("Pruning mode: Vertical Front Porch out of range"); |
| return MODE_VBLANK_WIDE; |
| } |
| |
| if ((vsw-1) & ~0x3f) { |
| DBG("Pruning mode: Vertical Sync Width out of range"); |
| return MODE_VSYNC_WIDE; |
| } |
| |
| /* |
| * some devices have a maximum allowed pixel clock |
| * configured from the DT |
| */ |
| if (mode->clock > priv->max_pixelclock) { |
| DBG("Pruning mode: pixel clock too high"); |
| return MODE_CLOCK_HIGH; |
| } |
| |
| /* |
| * some devices further limit the max horizontal resolution |
| * configured from the DT |
| */ |
| if (mode->hdisplay > priv->max_width) |
| return MODE_BAD_WIDTH; |
| |
| /* filter out modes that would require too much memory bandwidth: */ |
| bandwidth = mode->hdisplay * mode->vdisplay * |
| drm_mode_vrefresh(mode); |
| if (bandwidth > priv->max_bandwidth) { |
| DBG("Pruning mode: exceeds defined bandwidth limit"); |
| return MODE_BAD; |
| } |
| |
| return MODE_OK; |
| } |
| |
| void tilcdc_crtc_set_panel_info(struct drm_crtc *crtc, |
| const struct tilcdc_panel_info *info) |
| { |
| struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc); |
| tilcdc_crtc->info = info; |
| } |
| |
| void tilcdc_crtc_set_simulate_vesa_sync(struct drm_crtc *crtc, |
| bool simulate_vesa_sync) |
| { |
| struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc); |
| |
| tilcdc_crtc->simulate_vesa_sync = simulate_vesa_sync; |
| } |
| |
| void tilcdc_crtc_update_clk(struct drm_crtc *crtc) |
| { |
| struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc); |
| struct drm_device *dev = crtc->dev; |
| struct tilcdc_drm_private *priv = dev->dev_private; |
| int dpms = tilcdc_crtc->dpms; |
| unsigned long lcd_clk; |
| const unsigned clkdiv = 2; /* using a fixed divider of 2 */ |
| int ret; |
| |
| pm_runtime_get_sync(dev->dev); |
| |
| if (dpms == DRM_MODE_DPMS_ON) |
| tilcdc_crtc_dpms(crtc, DRM_MODE_DPMS_OFF); |
| |
| /* mode.clock is in KHz, set_rate wants parameter in Hz */ |
| ret = clk_set_rate(priv->clk, crtc->mode.clock * 1000 * clkdiv); |
| if (ret < 0) { |
| dev_err(dev->dev, "failed to set display clock rate to: %d\n", |
| crtc->mode.clock); |
| goto out; |
| } |
| |
| lcd_clk = clk_get_rate(priv->clk); |
| |
| DBG("lcd_clk=%lu, mode clock=%d, div=%u", |
| lcd_clk, crtc->mode.clock, clkdiv); |
| |
| /* Configure the LCD clock divisor. */ |
| tilcdc_write(dev, LCDC_CTRL_REG, LCDC_CLK_DIVISOR(clkdiv) | |
| LCDC_RASTER_MODE); |
| |
| if (priv->rev == 2) |
| tilcdc_set(dev, LCDC_CLK_ENABLE_REG, |
| LCDC_V2_DMA_CLK_EN | LCDC_V2_LIDD_CLK_EN | |
| LCDC_V2_CORE_CLK_EN); |
| |
| if (dpms == DRM_MODE_DPMS_ON) |
| tilcdc_crtc_dpms(crtc, DRM_MODE_DPMS_ON); |
| |
| out: |
| pm_runtime_put_sync(dev->dev); |
| } |
| |
| #define SYNC_LOST_COUNT_LIMIT 50 |
| |
| irqreturn_t tilcdc_crtc_irq(struct drm_crtc *crtc) |
| { |
| struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc); |
| struct drm_device *dev = crtc->dev; |
| struct tilcdc_drm_private *priv = dev->dev_private; |
| uint32_t stat; |
| |
| stat = tilcdc_read_irqstatus(dev); |
| tilcdc_clear_irqstatus(dev, stat); |
| |
| if (stat & LCDC_END_OF_FRAME0) { |
| unsigned long flags; |
| bool skip_event = false; |
| ktime_t now; |
| |
| now = ktime_get(); |
| |
| drm_flip_work_commit(&tilcdc_crtc->unref_work, priv->wq); |
| |
| spin_lock_irqsave(&tilcdc_crtc->irq_lock, flags); |
| |
| tilcdc_crtc->last_vblank = now; |
| |
| if (tilcdc_crtc->next_fb) { |
| set_scanout(crtc, tilcdc_crtc->next_fb); |
| tilcdc_crtc->next_fb = NULL; |
| skip_event = true; |
| } |
| |
| spin_unlock_irqrestore(&tilcdc_crtc->irq_lock, flags); |
| |
| drm_handle_vblank(dev, 0); |
| |
| if (!skip_event) { |
| struct drm_pending_vblank_event *event; |
| |
| spin_lock_irqsave(&dev->event_lock, flags); |
| |
| event = tilcdc_crtc->event; |
| tilcdc_crtc->event = NULL; |
| if (event) |
| drm_send_vblank_event(dev, 0, event); |
| |
| spin_unlock_irqrestore(&dev->event_lock, flags); |
| } |
| |
| if (tilcdc_crtc->frame_intact) |
| tilcdc_crtc->sync_lost_count = 0; |
| else |
| tilcdc_crtc->frame_intact = true; |
| } |
| |
| if (priv->rev == 2) { |
| if (stat & LCDC_FRAME_DONE) { |
| tilcdc_crtc->frame_done = true; |
| wake_up(&tilcdc_crtc->frame_done_wq); |
| } |
| tilcdc_write(dev, LCDC_END_OF_INT_IND_REG, 0); |
| } |
| |
| if (stat & LCDC_SYNC_LOST) { |
| dev_err_ratelimited(dev->dev, "%s(0x%08x): Sync lost", |
| __func__, stat); |
| tilcdc_crtc->frame_intact = false; |
| if (tilcdc_crtc->sync_lost_count++ > SYNC_LOST_COUNT_LIMIT) { |
| dev_err(dev->dev, |
| "%s(0x%08x): Sync lost flood detected, disabling the interrupt", |
| __func__, stat); |
| tilcdc_write(dev, LCDC_INT_ENABLE_CLR_REG, |
| LCDC_SYNC_LOST); |
| } |
| } |
| |
| if (stat & LCDC_FIFO_UNDERFLOW) |
| dev_err_ratelimited(dev->dev, "%s(0x%08x): FIFO underfow", |
| __func__, stat); |
| |
| return IRQ_HANDLED; |
| } |
| |
| struct drm_crtc *tilcdc_crtc_create(struct drm_device *dev) |
| { |
| struct tilcdc_drm_private *priv = dev->dev_private; |
| struct tilcdc_crtc *tilcdc_crtc; |
| struct drm_crtc *crtc; |
| int ret; |
| |
| tilcdc_crtc = devm_kzalloc(dev->dev, sizeof(*tilcdc_crtc), GFP_KERNEL); |
| if (!tilcdc_crtc) { |
| dev_err(dev->dev, "allocation failed\n"); |
| return NULL; |
| } |
| |
| crtc = &tilcdc_crtc->base; |
| |
| tilcdc_crtc->dpms = DRM_MODE_DPMS_OFF; |
| init_waitqueue_head(&tilcdc_crtc->frame_done_wq); |
| |
| drm_flip_work_init(&tilcdc_crtc->unref_work, |
| "unref", unref_worker); |
| |
| spin_lock_init(&tilcdc_crtc->irq_lock); |
| |
| ret = drm_crtc_init(dev, crtc, &tilcdc_crtc_funcs); |
| if (ret < 0) |
| goto fail; |
| |
| drm_crtc_helper_add(crtc, &tilcdc_crtc_helper_funcs); |
| |
| if (priv->is_componentized) { |
| struct device_node *ports = |
| of_get_child_by_name(dev->dev->of_node, "ports"); |
| |
| if (ports) { |
| crtc->port = of_get_child_by_name(ports, "port"); |
| of_node_put(ports); |
| } else { |
| crtc->port = |
| of_get_child_by_name(dev->dev->of_node, "port"); |
| } |
| if (!crtc->port) { /* This should never happen */ |
| dev_err(dev->dev, "Port node not found in %s\n", |
| dev->dev->of_node->full_name); |
| goto fail; |
| } |
| } |
| |
| return crtc; |
| |
| fail: |
| tilcdc_crtc_destroy(crtc); |
| return NULL; |
| } |