| /* |
| * USB device controllers have lots of quirks. Use these macros in |
| * gadget drivers or other code that needs to deal with them, and which |
| * autoconfigures instead of using early binding to the hardware. |
| * |
| * This SHOULD eventually work like the ARM mach_is_*() stuff, driven by |
| * some config file that gets updated as new hardware is supported. |
| * (And avoiding all runtime comparisons in typical one-choice configs!) |
| * |
| * NOTE: some of these controller drivers may not be available yet. |
| * Some are available on 2.4 kernels; several are available, but not |
| * yet pushed in the 2.6 mainline tree. |
| */ |
| |
| #ifndef __GADGET_CHIPS_H |
| #define __GADGET_CHIPS_H |
| |
| #ifdef CONFIG_USB_GADGET_NET2280 |
| #define gadget_is_net2280(g) !strcmp("net2280", (g)->name) |
| #else |
| #define gadget_is_net2280(g) 0 |
| #endif |
| |
| #ifdef CONFIG_USB_GADGET_AMD5536UDC |
| #define gadget_is_amd5536udc(g) !strcmp("amd5536udc", (g)->name) |
| #else |
| #define gadget_is_amd5536udc(g) 0 |
| #endif |
| |
| #ifdef CONFIG_USB_GADGET_DUMMY_HCD |
| #define gadget_is_dummy(g) !strcmp("dummy_udc", (g)->name) |
| #else |
| #define gadget_is_dummy(g) 0 |
| #endif |
| |
| #ifdef CONFIG_USB_GADGET_PXA25X |
| #define gadget_is_pxa(g) !strcmp("pxa25x_udc", (g)->name) |
| #else |
| #define gadget_is_pxa(g) 0 |
| #endif |
| |
| #ifdef CONFIG_USB_GADGET_GOKU |
| #define gadget_is_goku(g) !strcmp("goku_udc", (g)->name) |
| #else |
| #define gadget_is_goku(g) 0 |
| #endif |
| |
| #ifdef CONFIG_USB_GADGET_OMAP |
| #define gadget_is_omap(g) !strcmp("omap_udc", (g)->name) |
| #else |
| #define gadget_is_omap(g) 0 |
| #endif |
| |
| /* various unstable versions available */ |
| #ifdef CONFIG_USB_GADGET_PXA27X |
| #define gadget_is_pxa27x(g) !strcmp("pxa27x_udc", (g)->name) |
| #else |
| #define gadget_is_pxa27x(g) 0 |
| #endif |
| |
| #ifdef CONFIG_USB_GADGET_ATMEL_USBA |
| #define gadget_is_atmel_usba(g) !strcmp("atmel_usba_udc", (g)->name) |
| #else |
| #define gadget_is_atmel_usba(g) 0 |
| #endif |
| |
| #ifdef CONFIG_USB_GADGET_S3C2410 |
| #define gadget_is_s3c2410(g) !strcmp("s3c2410_udc", (g)->name) |
| #else |
| #define gadget_is_s3c2410(g) 0 |
| #endif |
| |
| #ifdef CONFIG_USB_GADGET_AT91 |
| #define gadget_is_at91(g) !strcmp("at91_udc", (g)->name) |
| #else |
| #define gadget_is_at91(g) 0 |
| #endif |
| |
| #ifdef CONFIG_USB_GADGET_IMX |
| #define gadget_is_imx(g) !strcmp("imx_udc", (g)->name) |
| #else |
| #define gadget_is_imx(g) 0 |
| #endif |
| |
| #ifdef CONFIG_USB_GADGET_FSL_USB2 |
| #define gadget_is_fsl_usb2(g) !strcmp("fsl-usb2-udc", (g)->name) |
| #else |
| #define gadget_is_fsl_usb2(g) 0 |
| #endif |
| |
| /* Mentor high speed "dual role" controller, in peripheral role */ |
| #ifdef CONFIG_USB_GADGET_MUSB_HDRC |
| #define gadget_is_musbhdrc(g) !strcmp("musb-hdrc", (g)->name) |
| #else |
| #define gadget_is_musbhdrc(g) 0 |
| #endif |
| |
| #ifdef CONFIG_USB_GADGET_LANGWELL |
| #define gadget_is_langwell(g) (!strcmp("langwell_udc", (g)->name)) |
| #else |
| #define gadget_is_langwell(g) 0 |
| #endif |
| |
| #ifdef CONFIG_USB_GADGET_M66592 |
| #define gadget_is_m66592(g) !strcmp("m66592_udc", (g)->name) |
| #else |
| #define gadget_is_m66592(g) 0 |
| #endif |
| |
| /* Freescale CPM/QE UDC SUPPORT */ |
| #ifdef CONFIG_USB_GADGET_FSL_QE |
| #define gadget_is_fsl_qe(g) !strcmp("fsl_qe_udc", (g)->name) |
| #else |
| #define gadget_is_fsl_qe(g) 0 |
| #endif |
| |
| #ifdef CONFIG_USB_GADGET_CI13XXX_PCI |
| #define gadget_is_ci13xxx_pci(g) (!strcmp("ci13xxx_pci", (g)->name)) |
| #else |
| #define gadget_is_ci13xxx_pci(g) 0 |
| #endif |
| |
| // CONFIG_USB_GADGET_SX2 |
| // CONFIG_USB_GADGET_AU1X00 |
| // ... |
| |
| #ifdef CONFIG_USB_GADGET_R8A66597 |
| #define gadget_is_r8a66597(g) !strcmp("r8a66597_udc", (g)->name) |
| #else |
| #define gadget_is_r8a66597(g) 0 |
| #endif |
| |
| #ifdef CONFIG_USB_S3C_HSOTG |
| #define gadget_is_s3c_hsotg(g) (!strcmp("s3c-hsotg", (g)->name)) |
| #else |
| #define gadget_is_s3c_hsotg(g) 0 |
| #endif |
| |
| #ifdef CONFIG_USB_GADGET_EG20T |
| #define gadget_is_pch(g) (!strcmp("pch_udc", (g)->name)) |
| #else |
| #define gadget_is_pch(g) 0 |
| #endif |
| |
| #ifdef CONFIG_USB_GADGET_CI13XXX_MSM |
| #define gadget_is_ci13xxx_msm(g) (!strcmp("ci13xxx_msm", (g)->name)) |
| #else |
| #define gadget_is_ci13xxx_msm(g) 0 |
| #endif |
| |
| /** |
| * usb_gadget_controller_number - support bcdDevice id convention |
| * @gadget: the controller being driven |
| * |
| * Return a 2-digit BCD value associated with the peripheral controller, |
| * suitable for use as part of a bcdDevice value, or a negative error code. |
| * |
| * NOTE: this convention is purely optional, and has no meaning in terms of |
| * any USB specification. If you want to use a different convention in your |
| * gadget driver firmware -- maybe a more formal revision ID -- feel free. |
| * |
| * Hosts see these bcdDevice numbers, and are allowed (but not encouraged!) |
| * to change their behavior accordingly. For example it might help avoiding |
| * some chip bug. |
| */ |
| static inline int usb_gadget_controller_number(struct usb_gadget *gadget) |
| { |
| if (gadget_is_net2280(gadget)) |
| return 0x01; |
| else if (gadget_is_dummy(gadget)) |
| return 0x02; |
| else if (gadget_is_pxa(gadget)) |
| return 0x03; |
| else if (gadget_is_goku(gadget)) |
| return 0x06; |
| else if (gadget_is_omap(gadget)) |
| return 0x08; |
| else if (gadget_is_pxa27x(gadget)) |
| return 0x11; |
| else if (gadget_is_s3c2410(gadget)) |
| return 0x12; |
| else if (gadget_is_at91(gadget)) |
| return 0x13; |
| else if (gadget_is_imx(gadget)) |
| return 0x14; |
| else if (gadget_is_musbhdrc(gadget)) |
| return 0x16; |
| else if (gadget_is_atmel_usba(gadget)) |
| return 0x18; |
| else if (gadget_is_fsl_usb2(gadget)) |
| return 0x19; |
| else if (gadget_is_amd5536udc(gadget)) |
| return 0x20; |
| else if (gadget_is_m66592(gadget)) |
| return 0x21; |
| else if (gadget_is_fsl_qe(gadget)) |
| return 0x22; |
| else if (gadget_is_ci13xxx_pci(gadget)) |
| return 0x23; |
| else if (gadget_is_langwell(gadget)) |
| return 0x24; |
| else if (gadget_is_r8a66597(gadget)) |
| return 0x25; |
| else if (gadget_is_s3c_hsotg(gadget)) |
| return 0x26; |
| else if (gadget_is_pch(gadget)) |
| return 0x27; |
| else if (gadget_is_ci13xxx_msm(gadget)) |
| return 0x28; |
| return -ENOENT; |
| } |
| |
| |
| /** |
| * gadget_supports_altsettings - return true if altsettings work |
| * @gadget: the gadget in question |
| */ |
| static inline bool gadget_supports_altsettings(struct usb_gadget *gadget) |
| { |
| /* PXA 21x/25x/26x has no altsettings at all */ |
| if (gadget_is_pxa(gadget)) |
| return false; |
| |
| /* PXA 27x and 3xx have *broken* altsetting support */ |
| if (gadget_is_pxa27x(gadget)) |
| return false; |
| |
| /* Everything else is *presumably* fine ... */ |
| return true; |
| } |
| |
| #endif /* __GADGET_CHIPS_H */ |