| /* |
| * ALSA driver for the Aureal Vortex family of soundprocessors. |
| * Author: Manuel Jander (mjander@embedded.cl) |
| * |
| * This driver is the result of the OpenVortex Project from Savannah |
| * (savannah.nongnu.org/projects/openvortex). I would like to thank |
| * the developers of OpenVortex, Jeff Muizelaar and Kester Maddock, from |
| * whom i got plenty of help, and their codebase was invaluable. |
| * Thanks to the ALSA developers, they helped a lot working out |
| * the ALSA part. |
| * Thanks also to Sourceforge for maintaining the old binary drivers, |
| * and the forum, where developers could comunicate. |
| * |
| * Now at least i can play Legacy DOOM with MIDI music :-) |
| */ |
| |
| #include "au88x0.h" |
| #include <linux/init.h> |
| #include <linux/pci.h> |
| #include <linux/slab.h> |
| #include <linux/interrupt.h> |
| #include <linux/moduleparam.h> |
| #include <linux/dma-mapping.h> |
| #include <sound/initval.h> |
| |
| // module parameters (see "Module Parameters") |
| static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; |
| static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; |
| static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP; |
| static int pcifix[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS - 1)] = 255 }; |
| |
| module_param_array(index, int, NULL, 0444); |
| MODULE_PARM_DESC(index, "Index value for " CARD_NAME " soundcard."); |
| module_param_array(id, charp, NULL, 0444); |
| MODULE_PARM_DESC(id, "ID string for " CARD_NAME " soundcard."); |
| module_param_array(enable, bool, NULL, 0444); |
| MODULE_PARM_DESC(enable, "Enable " CARD_NAME " soundcard."); |
| module_param_array(pcifix, int, NULL, 0444); |
| MODULE_PARM_DESC(pcifix, "Enable VIA-workaround for " CARD_NAME " soundcard."); |
| |
| MODULE_DESCRIPTION("Aureal vortex"); |
| MODULE_LICENSE("GPL"); |
| MODULE_SUPPORTED_DEVICE("{{Aureal Semiconductor Inc., Aureal Vortex Sound Processor}}"); |
| |
| MODULE_DEVICE_TABLE(pci, snd_vortex_ids); |
| |
| static void vortex_fix_latency(struct pci_dev *vortex) |
| { |
| int rc; |
| if (!(rc = pci_write_config_byte(vortex, 0x40, 0xff))) { |
| printk(KERN_INFO CARD_NAME |
| ": vortex latency is 0xff\n"); |
| } else { |
| printk(KERN_WARNING CARD_NAME |
| ": could not set vortex latency: pci error 0x%x\n", rc); |
| } |
| } |
| |
| static void vortex_fix_agp_bridge(struct pci_dev *via) |
| { |
| int rc; |
| u8 value; |
| |
| /* |
| * only set the bit (Extend PCI#2 Internal Master for |
| * Efficient Handling of Dummy Requests) if the can |
| * read the config and it is not already set |
| */ |
| |
| if (!(rc = pci_read_config_byte(via, 0x42, &value)) |
| && ((value & 0x10) |
| || !(rc = pci_write_config_byte(via, 0x42, value | 0x10)))) { |
| printk(KERN_INFO CARD_NAME |
| ": bridge config is 0x%x\n", value | 0x10); |
| } else { |
| printk(KERN_WARNING CARD_NAME |
| ": could not set vortex latency: pci error 0x%x\n", rc); |
| } |
| } |
| |
| static void __devinit snd_vortex_workaround(struct pci_dev *vortex, int fix) |
| { |
| struct pci_dev *via = NULL; |
| |
| /* autodetect if workarounds are required */ |
| if (fix == 255) { |
| /* VIA KT133 */ |
| via = pci_get_device(PCI_VENDOR_ID_VIA, |
| PCI_DEVICE_ID_VIA_8365_1, NULL); |
| /* VIA Apollo */ |
| if (via == NULL) { |
| via = pci_get_device(PCI_VENDOR_ID_VIA, |
| PCI_DEVICE_ID_VIA_82C598_1, NULL); |
| /* AMD Irongate */ |
| if (via == NULL) |
| via = pci_get_device(PCI_VENDOR_ID_AMD, |
| PCI_DEVICE_ID_AMD_FE_GATE_7007, NULL); |
| } |
| if (via) { |
| printk(KERN_INFO CARD_NAME ": Activating latency workaround...\n"); |
| vortex_fix_latency(vortex); |
| vortex_fix_agp_bridge(via); |
| } |
| } else { |
| if (fix & 0x1) |
| vortex_fix_latency(vortex); |
| if ((fix & 0x2) && (via = pci_get_device(PCI_VENDOR_ID_VIA, |
| PCI_DEVICE_ID_VIA_8365_1, NULL))) |
| vortex_fix_agp_bridge(via); |
| if ((fix & 0x4) && (via = pci_get_device(PCI_VENDOR_ID_VIA, |
| PCI_DEVICE_ID_VIA_82C598_1, NULL))) |
| vortex_fix_agp_bridge(via); |
| if ((fix & 0x8) && (via = pci_get_device(PCI_VENDOR_ID_AMD, |
| PCI_DEVICE_ID_AMD_FE_GATE_7007, NULL))) |
| vortex_fix_agp_bridge(via); |
| } |
| pci_dev_put(via); |
| } |
| |
| // component-destructor |
| // (see "Management of Cards and Components") |
| static int snd_vortex_dev_free(struct snd_device *device) |
| { |
| vortex_t *vortex = device->device_data; |
| |
| vortex_gameport_unregister(vortex); |
| vortex_core_shutdown(vortex); |
| // Take down PCI interface. |
| synchronize_irq(vortex->irq); |
| free_irq(vortex->irq, vortex); |
| iounmap(vortex->mmio); |
| pci_release_regions(vortex->pci_dev); |
| pci_disable_device(vortex->pci_dev); |
| kfree(vortex); |
| |
| return 0; |
| } |
| |
| // chip-specific constructor |
| // (see "Management of Cards and Components") |
| static int __devinit |
| snd_vortex_create(struct snd_card *card, struct pci_dev *pci, vortex_t ** rchip) |
| { |
| vortex_t *chip; |
| int err; |
| static struct snd_device_ops ops = { |
| .dev_free = snd_vortex_dev_free, |
| }; |
| |
| *rchip = NULL; |
| |
| // check PCI availability (DMA). |
| if ((err = pci_enable_device(pci)) < 0) |
| return err; |
| if (pci_set_dma_mask(pci, DMA_32BIT_MASK) < 0 || |
| pci_set_consistent_dma_mask(pci, DMA_32BIT_MASK) < 0) { |
| printk(KERN_ERR "error to set DMA mask\n"); |
| pci_disable_device(pci); |
| return -ENXIO; |
| } |
| |
| chip = kzalloc(sizeof(*chip), GFP_KERNEL); |
| if (chip == NULL) { |
| pci_disable_device(pci); |
| return -ENOMEM; |
| } |
| |
| chip->card = card; |
| |
| // initialize the stuff |
| chip->pci_dev = pci; |
| chip->io = pci_resource_start(pci, 0); |
| chip->vendor = pci->vendor; |
| chip->device = pci->device; |
| chip->card = card; |
| chip->irq = -1; |
| |
| // (1) PCI resource allocation |
| // Get MMIO area |
| // |
| if ((err = pci_request_regions(pci, CARD_NAME_SHORT)) != 0) |
| goto regions_out; |
| |
| chip->mmio = ioremap_nocache(pci_resource_start(pci, 0), |
| pci_resource_len(pci, 0)); |
| if (!chip->mmio) { |
| printk(KERN_ERR "MMIO area remap failed.\n"); |
| err = -ENOMEM; |
| goto ioremap_out; |
| } |
| |
| /* Init audio core. |
| * This must be done before we do request_irq otherwise we can get spurious |
| * interupts that we do not handle properly and make a mess of things */ |
| if ((err = vortex_core_init(chip)) != 0) { |
| printk(KERN_ERR "hw core init failed\n"); |
| goto core_out; |
| } |
| |
| if ((err = request_irq(pci->irq, vortex_interrupt, |
| IRQF_SHARED, CARD_NAME_SHORT, |
| chip)) != 0) { |
| printk(KERN_ERR "cannot grab irq\n"); |
| goto irq_out; |
| } |
| chip->irq = pci->irq; |
| |
| pci_set_master(pci); |
| // End of PCI setup. |
| |
| // Register alsa root device. |
| if ((err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops)) < 0) { |
| goto alloc_out; |
| } |
| |
| snd_card_set_dev(card, &pci->dev); |
| |
| *rchip = chip; |
| |
| return 0; |
| |
| alloc_out: |
| synchronize_irq(chip->irq); |
| free_irq(chip->irq, chip); |
| irq_out: |
| vortex_core_shutdown(chip); |
| core_out: |
| iounmap(chip->mmio); |
| ioremap_out: |
| pci_release_regions(chip->pci_dev); |
| regions_out: |
| pci_disable_device(chip->pci_dev); |
| //FIXME: this not the right place to unregister the gameport |
| vortex_gameport_unregister(chip); |
| return err; |
| } |
| |
| // constructor -- see "Constructor" sub-section |
| static int __devinit |
| snd_vortex_probe(struct pci_dev *pci, const struct pci_device_id *pci_id) |
| { |
| static int dev; |
| struct snd_card *card; |
| vortex_t *chip; |
| int err; |
| |
| // (1) |
| if (dev >= SNDRV_CARDS) |
| return -ENODEV; |
| if (!enable[dev]) { |
| dev++; |
| return -ENOENT; |
| } |
| // (2) |
| card = snd_card_new(index[dev], id[dev], THIS_MODULE, 0); |
| if (card == NULL) |
| return -ENOMEM; |
| |
| // (3) |
| if ((err = snd_vortex_create(card, pci, &chip)) < 0) { |
| snd_card_free(card); |
| return err; |
| } |
| snd_vortex_workaround(pci, pcifix[dev]); |
| |
| // Card details needed in snd_vortex_midi |
| strcpy(card->driver, CARD_NAME_SHORT); |
| sprintf(card->shortname, "Aureal Vortex %s", CARD_NAME_SHORT); |
| sprintf(card->longname, "%s at 0x%lx irq %i", |
| card->shortname, chip->io, chip->irq); |
| |
| // (4) Alloc components. |
| // ADB pcm. |
| if ((err = snd_vortex_new_pcm(chip, VORTEX_PCM_ADB, NR_ADB)) < 0) { |
| snd_card_free(card); |
| return err; |
| } |
| #ifndef CHIP_AU8820 |
| // ADB SPDIF |
| if ((err = snd_vortex_new_pcm(chip, VORTEX_PCM_SPDIF, 1)) < 0) { |
| snd_card_free(card); |
| return err; |
| } |
| // A3D |
| if ((err = snd_vortex_new_pcm(chip, VORTEX_PCM_A3D, NR_A3D)) < 0) { |
| snd_card_free(card); |
| return err; |
| } |
| #endif |
| /* |
| // ADB I2S |
| if ((err = snd_vortex_new_pcm(chip, VORTEX_PCM_I2S, 1)) < 0) { |
| snd_card_free(card); |
| return err; |
| } |
| */ |
| #ifndef CHIP_AU8810 |
| // WT pcm. |
| if ((err = snd_vortex_new_pcm(chip, VORTEX_PCM_WT, NR_WT)) < 0) { |
| snd_card_free(card); |
| return err; |
| } |
| #endif |
| // snd_ac97_mixer and Vortex mixer. |
| if ((err = snd_vortex_mixer(chip)) < 0) { |
| snd_card_free(card); |
| return err; |
| } |
| if ((err = snd_vortex_midi(chip)) < 0) { |
| snd_card_free(card); |
| return err; |
| } |
| |
| vortex_gameport_register(chip); |
| |
| #if 0 |
| if (snd_seq_device_new(card, 1, SNDRV_SEQ_DEV_ID_VORTEX_SYNTH, |
| sizeof(snd_vortex_synth_arg_t), &wave) < 0 |
| || wave == NULL) { |
| snd_printk(KERN_ERR "Can't initialize Aureal wavetable synth\n"); |
| } else { |
| snd_vortex_synth_arg_t *arg; |
| |
| arg = SNDRV_SEQ_DEVICE_ARGPTR(wave); |
| strcpy(wave->name, "Aureal Synth"); |
| arg->hwptr = vortex; |
| arg->index = 1; |
| arg->seq_ports = seq_ports[dev]; |
| arg->max_voices = max_synth_voices[dev]; |
| } |
| #endif |
| |
| // (5) |
| if ((err = pci_read_config_word(pci, PCI_DEVICE_ID, |
| &(chip->device))) < 0) { |
| snd_card_free(card); |
| return err; |
| } |
| if ((err = pci_read_config_word(pci, PCI_VENDOR_ID, |
| &(chip->vendor))) < 0) { |
| snd_card_free(card); |
| return err; |
| } |
| chip->rev = pci->revision; |
| #ifdef CHIP_AU8830 |
| if ((chip->rev) != 0xfe && (chip->rev) != 0xfa) { |
| printk(KERN_ALERT |
| "vortex: The revision (%x) of your card has not been seen before.\n", |
| chip->rev); |
| printk(KERN_ALERT |
| "vortex: Please email the results of 'lspci -vv' to openvortex-dev@nongnu.org.\n"); |
| snd_card_free(card); |
| err = -ENODEV; |
| return err; |
| } |
| #endif |
| |
| // (6) |
| if ((err = snd_card_register(card)) < 0) { |
| snd_card_free(card); |
| return err; |
| } |
| // (7) |
| pci_set_drvdata(pci, card); |
| dev++; |
| vortex_connect_default(chip, 1); |
| vortex_enable_int(chip); |
| return 0; |
| } |
| |
| // destructor -- see "Destructor" sub-section |
| static void __devexit snd_vortex_remove(struct pci_dev *pci) |
| { |
| snd_card_free(pci_get_drvdata(pci)); |
| pci_set_drvdata(pci, NULL); |
| } |
| |
| // pci_driver definition |
| static struct pci_driver driver = { |
| .name = CARD_NAME_SHORT, |
| .id_table = snd_vortex_ids, |
| .probe = snd_vortex_probe, |
| .remove = __devexit_p(snd_vortex_remove), |
| }; |
| |
| // initialization of the module |
| static int __init alsa_card_vortex_init(void) |
| { |
| return pci_register_driver(&driver); |
| } |
| |
| // clean up the module |
| static void __exit alsa_card_vortex_exit(void) |
| { |
| pci_unregister_driver(&driver); |
| } |
| |
| module_init(alsa_card_vortex_init) |
| module_exit(alsa_card_vortex_exit) |