| /* |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file "COPYING" in the main directory of this archive |
| * for more details. |
| * |
| * Copyright (C) 2004-2008 Cavium Networks |
| */ |
| #ifndef __ASM_OCTEON_OCTEON_H |
| #define __ASM_OCTEON_OCTEON_H |
| |
| #include "cvmx.h" |
| |
| extern uint64_t octeon_bootmem_alloc_range_phys(uint64_t size, |
| uint64_t alignment, |
| uint64_t min_addr, |
| uint64_t max_addr, |
| int do_locking); |
| extern void *octeon_bootmem_alloc(uint64_t size, uint64_t alignment, |
| int do_locking); |
| extern void *octeon_bootmem_alloc_range(uint64_t size, uint64_t alignment, |
| uint64_t min_addr, uint64_t max_addr, |
| int do_locking); |
| extern void *octeon_bootmem_alloc_named(uint64_t size, uint64_t alignment, |
| char *name); |
| extern void *octeon_bootmem_alloc_named_range(uint64_t size, uint64_t min_addr, |
| uint64_t max_addr, uint64_t align, |
| char *name); |
| extern void *octeon_bootmem_alloc_named_address(uint64_t size, uint64_t address, |
| char *name); |
| extern int octeon_bootmem_free_named(char *name); |
| extern void octeon_bootmem_lock(void); |
| extern void octeon_bootmem_unlock(void); |
| |
| extern int octeon_is_simulation(void); |
| extern int octeon_is_pci_host(void); |
| extern int octeon_usb_is_ref_clk(void); |
| extern uint64_t octeon_get_clock_rate(void); |
| extern u64 octeon_get_io_clock_rate(void); |
| extern const char *octeon_board_type_string(void); |
| extern const char *octeon_get_pci_interrupts(void); |
| extern int octeon_get_southbridge_interrupt(void); |
| extern int octeon_get_boot_coremask(void); |
| extern int octeon_get_boot_num_arguments(void); |
| extern const char *octeon_get_boot_argument(int arg); |
| extern void octeon_hal_setup_reserved32(void); |
| extern void octeon_user_io_init(void); |
| struct octeon_cop2_state; |
| extern unsigned long octeon_crypto_enable(struct octeon_cop2_state *state); |
| extern void octeon_crypto_disable(struct octeon_cop2_state *state, |
| unsigned long flags); |
| extern asmlinkage void octeon_cop2_restore(struct octeon_cop2_state *task); |
| |
| extern void octeon_init_cvmcount(void); |
| extern void octeon_setup_delays(void); |
| |
| #define OCTEON_ARGV_MAX_ARGS 64 |
| #define OCTOEN_SERIAL_LEN 20 |
| |
| struct octeon_boot_descriptor { |
| /* Start of block referenced by assembly code - do not change! */ |
| uint32_t desc_version; |
| uint32_t desc_size; |
| uint64_t stack_top; |
| uint64_t heap_base; |
| uint64_t heap_end; |
| /* Only used by bootloader */ |
| uint64_t entry_point; |
| uint64_t desc_vaddr; |
| /* End of This block referenced by assembly code - do not change! */ |
| uint32_t exception_base_addr; |
| uint32_t stack_size; |
| uint32_t heap_size; |
| /* Argc count for application. */ |
| uint32_t argc; |
| uint32_t argv[OCTEON_ARGV_MAX_ARGS]; |
| |
| #define BOOT_FLAG_INIT_CORE (1 << 0) |
| #define OCTEON_BL_FLAG_DEBUG (1 << 1) |
| #define OCTEON_BL_FLAG_NO_MAGIC (1 << 2) |
| /* If set, use uart1 for console */ |
| #define OCTEON_BL_FLAG_CONSOLE_UART1 (1 << 3) |
| /* If set, use PCI console */ |
| #define OCTEON_BL_FLAG_CONSOLE_PCI (1 << 4) |
| /* Call exit on break on serial port */ |
| #define OCTEON_BL_FLAG_BREAK (1 << 5) |
| |
| uint32_t flags; |
| uint32_t core_mask; |
| /* DRAM size in megabyes. */ |
| uint32_t dram_size; |
| /* physical address of free memory descriptor block. */ |
| uint32_t phy_mem_desc_addr; |
| /* used to pass flags from app to debugger. */ |
| uint32_t debugger_flags_base_addr; |
| /* CPU clock speed, in hz. */ |
| uint32_t eclock_hz; |
| /* DRAM clock speed, in hz. */ |
| uint32_t dclock_hz; |
| /* SPI4 clock in hz. */ |
| uint32_t spi_clock_hz; |
| uint16_t board_type; |
| uint8_t board_rev_major; |
| uint8_t board_rev_minor; |
| uint16_t chip_type; |
| uint8_t chip_rev_major; |
| uint8_t chip_rev_minor; |
| char board_serial_number[OCTOEN_SERIAL_LEN]; |
| uint8_t mac_addr_base[6]; |
| uint8_t mac_addr_count; |
| uint64_t cvmx_desc_vaddr; |
| }; |
| |
| union octeon_cvmemctl { |
| uint64_t u64; |
| struct { |
| /* RO 1 = BIST fail, 0 = BIST pass */ |
| uint64_t tlbbist:1; |
| /* RO 1 = BIST fail, 0 = BIST pass */ |
| uint64_t l1cbist:1; |
| /* RO 1 = BIST fail, 0 = BIST pass */ |
| uint64_t l1dbist:1; |
| /* RO 1 = BIST fail, 0 = BIST pass */ |
| uint64_t dcmbist:1; |
| /* RO 1 = BIST fail, 0 = BIST pass */ |
| uint64_t ptgbist:1; |
| /* RO 1 = BIST fail, 0 = BIST pass */ |
| uint64_t wbfbist:1; |
| /* Reserved */ |
| uint64_t reserved:22; |
| /* R/W If set, marked write-buffer entries time out |
| * the same as as other entries; if clear, marked |
| * write-buffer entries use the maximum timeout. */ |
| uint64_t dismarkwblongto:1; |
| /* R/W If set, a merged store does not clear the |
| * write-buffer entry timeout state. */ |
| uint64_t dismrgclrwbto:1; |
| /* R/W Two bits that are the MSBs of the resultant |
| * CVMSEG LM word location for an IOBDMA. The other 8 |
| * bits come from the SCRADDR field of the IOBDMA. */ |
| uint64_t iobdmascrmsb:2; |
| /* R/W If set, SYNCWS and SYNCS only order marked |
| * stores; if clear, SYNCWS and SYNCS only order |
| * unmarked stores. SYNCWSMARKED has no effect when |
| * DISSYNCWS is set. */ |
| uint64_t syncwsmarked:1; |
| /* R/W If set, SYNCWS acts as SYNCW and SYNCS acts as |
| * SYNC. */ |
| uint64_t dissyncws:1; |
| /* R/W If set, no stall happens on write buffer |
| * full. */ |
| uint64_t diswbfst:1; |
| /* R/W If set (and SX set), supervisor-level |
| * loads/stores can use XKPHYS addresses with |
| * VA<48>==0 */ |
| uint64_t xkmemenas:1; |
| /* R/W If set (and UX set), user-level loads/stores |
| * can use XKPHYS addresses with VA<48>==0 */ |
| uint64_t xkmemenau:1; |
| /* R/W If set (and SX set), supervisor-level |
| * loads/stores can use XKPHYS addresses with |
| * VA<48>==1 */ |
| uint64_t xkioenas:1; |
| /* R/W If set (and UX set), user-level loads/stores |
| * can use XKPHYS addresses with VA<48>==1 */ |
| uint64_t xkioenau:1; |
| /* R/W If set, all stores act as SYNCW (NOMERGE must |
| * be set when this is set) RW, reset to 0. */ |
| uint64_t allsyncw:1; |
| /* R/W If set, no stores merge, and all stores reach |
| * the coherent bus in order. */ |
| uint64_t nomerge:1; |
| /* R/W Selects the bit in the counter used for DID |
| * time-outs 0 = 231, 1 = 230, 2 = 229, 3 = |
| * 214. Actual time-out is between 1x and 2x this |
| * interval. For example, with DIDTTO=3, expiration |
| * interval is between 16K and 32K. */ |
| uint64_t didtto:2; |
| /* R/W If set, the (mem) CSR clock never turns off. */ |
| uint64_t csrckalwys:1; |
| /* R/W If set, mclk never turns off. */ |
| uint64_t mclkalwys:1; |
| /* R/W Selects the bit in the counter used for write |
| * buffer flush time-outs (WBFLT+11) is the bit |
| * position in an internal counter used to determine |
| * expiration. The write buffer expires between 1x and |
| * 2x this interval. For example, with WBFLT = 0, a |
| * write buffer expires between 2K and 4K cycles after |
| * the write buffer entry is allocated. */ |
| uint64_t wbfltime:3; |
| /* R/W If set, do not put Istream in the L2 cache. */ |
| uint64_t istrnol2:1; |
| /* R/W The write buffer threshold. */ |
| uint64_t wbthresh:4; |
| /* Reserved */ |
| uint64_t reserved2:2; |
| /* R/W If set, CVMSEG is available for loads/stores in |
| * kernel/debug mode. */ |
| uint64_t cvmsegenak:1; |
| /* R/W If set, CVMSEG is available for loads/stores in |
| * supervisor mode. */ |
| uint64_t cvmsegenas:1; |
| /* R/W If set, CVMSEG is available for loads/stores in |
| * user mode. */ |
| uint64_t cvmsegenau:1; |
| /* R/W Size of local memory in cache blocks, 54 (6912 |
| * bytes) is max legal value. */ |
| uint64_t lmemsz:6; |
| } s; |
| }; |
| |
| struct octeon_cf_data { |
| unsigned long base_region_bias; |
| unsigned int base_region; /* The chip select region used by CF */ |
| int is16bit; /* 0 - 8bit, !0 - 16bit */ |
| int dma_engine; /* -1 for no DMA */ |
| }; |
| |
| extern void octeon_write_lcd(const char *s); |
| extern void octeon_check_cpu_bist(void); |
| extern int octeon_get_boot_debug_flag(void); |
| extern int octeon_get_boot_uart(void); |
| |
| struct uart_port; |
| extern unsigned int octeon_serial_in(struct uart_port *, int); |
| extern void octeon_serial_out(struct uart_port *, int, int); |
| |
| /** |
| * Write a 32bit value to the Octeon NPI register space |
| * |
| * @address: Address to write to |
| * @val: Value to write |
| */ |
| static inline void octeon_npi_write32(uint64_t address, uint32_t val) |
| { |
| cvmx_write64_uint32(address ^ 4, val); |
| cvmx_read64_uint32(address ^ 4); |
| } |
| |
| |
| /** |
| * Read a 32bit value from the Octeon NPI register space |
| * |
| * @address: Address to read |
| * Returns The result |
| */ |
| static inline uint32_t octeon_npi_read32(uint64_t address) |
| { |
| return cvmx_read64_uint32(address ^ 4); |
| } |
| |
| extern struct cvmx_bootinfo *octeon_bootinfo; |
| |
| extern uint64_t octeon_bootloader_entry_addr; |
| |
| extern void (*octeon_irq_setup_secondary)(void); |
| |
| #endif /* __ASM_OCTEON_OCTEON_H */ |