| /* |
| |
| Broadcom BCM43xx wireless driver |
| |
| Copyright (c) 2005 Martin Langer <martin-langer@gmx.de>, |
| Stefano Brivio <st3@riseup.net> |
| Michael Buesch <mbuesch@freenet.de> |
| Danny van Dyk <kugelfang@gentoo.org> |
| Andreas Jaggi <andreas.jaggi@waterwave.ch> |
| |
| Some parts of the code in this file are derived from the ipw2200 |
| driver Copyright(c) 2003 - 2004 Intel Corporation. |
| |
| This program is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation; either version 2 of the License, or |
| (at your option) any later version. |
| |
| This program is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with this program; see the file COPYING. If not, write to |
| the Free Software Foundation, Inc., 51 Franklin Steet, Fifth Floor, |
| Boston, MA 02110-1301, USA. |
| |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/init.h> |
| #include <linux/moduleparam.h> |
| #include <linux/if_arp.h> |
| #include <linux/etherdevice.h> |
| #include <linux/version.h> |
| #include <linux/firmware.h> |
| #include <linux/wireless.h> |
| #include <linux/workqueue.h> |
| #include <linux/skbuff.h> |
| #include <linux/dma-mapping.h> |
| #include <net/iw_handler.h> |
| |
| #include "bcm43xx.h" |
| #include "bcm43xx_main.h" |
| #include "bcm43xx_debugfs.h" |
| #include "bcm43xx_radio.h" |
| #include "bcm43xx_phy.h" |
| #include "bcm43xx_dma.h" |
| #include "bcm43xx_pio.h" |
| #include "bcm43xx_power.h" |
| #include "bcm43xx_wx.h" |
| #include "bcm43xx_ethtool.h" |
| #include "bcm43xx_xmit.h" |
| #include "bcm43xx_sysfs.h" |
| |
| |
| MODULE_DESCRIPTION("Broadcom BCM43xx wireless driver"); |
| MODULE_AUTHOR("Martin Langer"); |
| MODULE_AUTHOR("Stefano Brivio"); |
| MODULE_AUTHOR("Michael Buesch"); |
| MODULE_LICENSE("GPL"); |
| |
| #if defined(CONFIG_BCM43XX_DMA) && defined(CONFIG_BCM43XX_PIO) |
| static int modparam_pio; |
| module_param_named(pio, modparam_pio, int, 0444); |
| MODULE_PARM_DESC(pio, "enable(1) / disable(0) PIO mode"); |
| #elif defined(CONFIG_BCM43XX_DMA) |
| # define modparam_pio 0 |
| #elif defined(CONFIG_BCM43XX_PIO) |
| # define modparam_pio 1 |
| #endif |
| |
| static int modparam_bad_frames_preempt; |
| module_param_named(bad_frames_preempt, modparam_bad_frames_preempt, int, 0444); |
| MODULE_PARM_DESC(bad_frames_preempt, "enable(1) / disable(0) Bad Frames Preemption"); |
| |
| static int modparam_short_retry = BCM43xx_DEFAULT_SHORT_RETRY_LIMIT; |
| module_param_named(short_retry, modparam_short_retry, int, 0444); |
| MODULE_PARM_DESC(short_retry, "Short-Retry-Limit (0 - 15)"); |
| |
| static int modparam_long_retry = BCM43xx_DEFAULT_LONG_RETRY_LIMIT; |
| module_param_named(long_retry, modparam_long_retry, int, 0444); |
| MODULE_PARM_DESC(long_retry, "Long-Retry-Limit (0 - 15)"); |
| |
| static int modparam_locale = -1; |
| module_param_named(locale, modparam_locale, int, 0444); |
| MODULE_PARM_DESC(country, "Select LocaleCode 0-11 (For travelers)"); |
| |
| static int modparam_noleds; |
| module_param_named(noleds, modparam_noleds, int, 0444); |
| MODULE_PARM_DESC(noleds, "Turn off all LED activity"); |
| |
| static char modparam_fwpostfix[64]; |
| module_param_string(fwpostfix, modparam_fwpostfix, 64, 0444); |
| MODULE_PARM_DESC(fwpostfix, "Postfix for .fw files. Useful for using multiple firmware image versions."); |
| |
| |
| /* If you want to debug with just a single device, enable this, |
| * where the string is the pci device ID (as given by the kernel's |
| * pci_name function) of the device to be used. |
| */ |
| //#define DEBUG_SINGLE_DEVICE_ONLY "0001:11:00.0" |
| |
| /* If you want to enable printing of each MMIO access, enable this. */ |
| //#define DEBUG_ENABLE_MMIO_PRINT |
| |
| /* If you want to enable printing of MMIO access within |
| * ucode/pcm upload, initvals write, enable this. |
| */ |
| //#define DEBUG_ENABLE_UCODE_MMIO_PRINT |
| |
| /* If you want to enable printing of PCI Config Space access, enable this */ |
| //#define DEBUG_ENABLE_PCILOG |
| |
| |
| /* Detailed list maintained at: |
| * http://openfacts.berlios.de/index-en.phtml?title=Bcm43xxDevices |
| */ |
| static struct pci_device_id bcm43xx_pci_tbl[] = { |
| /* Broadcom 4303 802.11b */ |
| { PCI_VENDOR_ID_BROADCOM, 0x4301, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, |
| /* Broadcom 4307 802.11b */ |
| { PCI_VENDOR_ID_BROADCOM, 0x4307, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, |
| /* Broadcom 4311 802.11(a)/b/g */ |
| { PCI_VENDOR_ID_BROADCOM, 0x4311, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, |
| /* Broadcom 4312 802.11a/b/g */ |
| { PCI_VENDOR_ID_BROADCOM, 0x4312, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, |
| /* Broadcom 4318 802.11b/g */ |
| { PCI_VENDOR_ID_BROADCOM, 0x4318, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, |
| /* Broadcom 4319 802.11a/b/g */ |
| { PCI_VENDOR_ID_BROADCOM, 0x4319, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, |
| /* Broadcom 4306 802.11b/g */ |
| { PCI_VENDOR_ID_BROADCOM, 0x4320, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, |
| /* Broadcom 4306 802.11a */ |
| // { PCI_VENDOR_ID_BROADCOM, 0x4321, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, |
| /* Broadcom 4309 802.11a/b/g */ |
| { PCI_VENDOR_ID_BROADCOM, 0x4324, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, |
| /* Broadcom 43XG 802.11b/g */ |
| { PCI_VENDOR_ID_BROADCOM, 0x4325, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, |
| { 0 }, |
| }; |
| MODULE_DEVICE_TABLE(pci, bcm43xx_pci_tbl); |
| |
| static void bcm43xx_ram_write(struct bcm43xx_private *bcm, u16 offset, u32 val) |
| { |
| u32 status; |
| |
| status = bcm43xx_read32(bcm, BCM43xx_MMIO_STATUS_BITFIELD); |
| if (!(status & BCM43xx_SBF_XFER_REG_BYTESWAP)) |
| val = swab32(val); |
| |
| bcm43xx_write32(bcm, BCM43xx_MMIO_RAM_CONTROL, offset); |
| mmiowb(); |
| bcm43xx_write32(bcm, BCM43xx_MMIO_RAM_DATA, val); |
| } |
| |
| static inline |
| void bcm43xx_shm_control_word(struct bcm43xx_private *bcm, |
| u16 routing, u16 offset) |
| { |
| u32 control; |
| |
| /* "offset" is the WORD offset. */ |
| |
| control = routing; |
| control <<= 16; |
| control |= offset; |
| bcm43xx_write32(bcm, BCM43xx_MMIO_SHM_CONTROL, control); |
| } |
| |
| u32 bcm43xx_shm_read32(struct bcm43xx_private *bcm, |
| u16 routing, u16 offset) |
| { |
| u32 ret; |
| |
| if (routing == BCM43xx_SHM_SHARED) { |
| if (offset & 0x0003) { |
| /* Unaligned access */ |
| bcm43xx_shm_control_word(bcm, routing, offset >> 2); |
| ret = bcm43xx_read16(bcm, BCM43xx_MMIO_SHM_DATA_UNALIGNED); |
| ret <<= 16; |
| bcm43xx_shm_control_word(bcm, routing, (offset >> 2) + 1); |
| ret |= bcm43xx_read16(bcm, BCM43xx_MMIO_SHM_DATA); |
| |
| return ret; |
| } |
| offset >>= 2; |
| } |
| bcm43xx_shm_control_word(bcm, routing, offset); |
| ret = bcm43xx_read32(bcm, BCM43xx_MMIO_SHM_DATA); |
| |
| return ret; |
| } |
| |
| u16 bcm43xx_shm_read16(struct bcm43xx_private *bcm, |
| u16 routing, u16 offset) |
| { |
| u16 ret; |
| |
| if (routing == BCM43xx_SHM_SHARED) { |
| if (offset & 0x0003) { |
| /* Unaligned access */ |
| bcm43xx_shm_control_word(bcm, routing, offset >> 2); |
| ret = bcm43xx_read16(bcm, BCM43xx_MMIO_SHM_DATA_UNALIGNED); |
| |
| return ret; |
| } |
| offset >>= 2; |
| } |
| bcm43xx_shm_control_word(bcm, routing, offset); |
| ret = bcm43xx_read16(bcm, BCM43xx_MMIO_SHM_DATA); |
| |
| return ret; |
| } |
| |
| void bcm43xx_shm_write32(struct bcm43xx_private *bcm, |
| u16 routing, u16 offset, |
| u32 value) |
| { |
| if (routing == BCM43xx_SHM_SHARED) { |
| if (offset & 0x0003) { |
| /* Unaligned access */ |
| bcm43xx_shm_control_word(bcm, routing, offset >> 2); |
| mmiowb(); |
| bcm43xx_write16(bcm, BCM43xx_MMIO_SHM_DATA_UNALIGNED, |
| (value >> 16) & 0xffff); |
| mmiowb(); |
| bcm43xx_shm_control_word(bcm, routing, (offset >> 2) + 1); |
| mmiowb(); |
| bcm43xx_write16(bcm, BCM43xx_MMIO_SHM_DATA, |
| value & 0xffff); |
| return; |
| } |
| offset >>= 2; |
| } |
| bcm43xx_shm_control_word(bcm, routing, offset); |
| mmiowb(); |
| bcm43xx_write32(bcm, BCM43xx_MMIO_SHM_DATA, value); |
| } |
| |
| void bcm43xx_shm_write16(struct bcm43xx_private *bcm, |
| u16 routing, u16 offset, |
| u16 value) |
| { |
| if (routing == BCM43xx_SHM_SHARED) { |
| if (offset & 0x0003) { |
| /* Unaligned access */ |
| bcm43xx_shm_control_word(bcm, routing, offset >> 2); |
| mmiowb(); |
| bcm43xx_write16(bcm, BCM43xx_MMIO_SHM_DATA_UNALIGNED, |
| value); |
| return; |
| } |
| offset >>= 2; |
| } |
| bcm43xx_shm_control_word(bcm, routing, offset); |
| mmiowb(); |
| bcm43xx_write16(bcm, BCM43xx_MMIO_SHM_DATA, value); |
| } |
| |
| void bcm43xx_tsf_read(struct bcm43xx_private *bcm, u64 *tsf) |
| { |
| /* We need to be careful. As we read the TSF from multiple |
| * registers, we should take care of register overflows. |
| * In theory, the whole tsf read process should be atomic. |
| * We try to be atomic here, by restaring the read process, |
| * if any of the high registers changed (overflew). |
| */ |
| if (bcm->current_core->rev >= 3) { |
| u32 low, high, high2; |
| |
| do { |
| high = bcm43xx_read32(bcm, BCM43xx_MMIO_REV3PLUS_TSF_HIGH); |
| low = bcm43xx_read32(bcm, BCM43xx_MMIO_REV3PLUS_TSF_LOW); |
| high2 = bcm43xx_read32(bcm, BCM43xx_MMIO_REV3PLUS_TSF_HIGH); |
| } while (unlikely(high != high2)); |
| |
| *tsf = high; |
| *tsf <<= 32; |
| *tsf |= low; |
| } else { |
| u64 tmp; |
| u16 v0, v1, v2, v3; |
| u16 test1, test2, test3; |
| |
| do { |
| v3 = bcm43xx_read16(bcm, BCM43xx_MMIO_TSF_3); |
| v2 = bcm43xx_read16(bcm, BCM43xx_MMIO_TSF_2); |
| v1 = bcm43xx_read16(bcm, BCM43xx_MMIO_TSF_1); |
| v0 = bcm43xx_read16(bcm, BCM43xx_MMIO_TSF_0); |
| |
| test3 = bcm43xx_read16(bcm, BCM43xx_MMIO_TSF_3); |
| test2 = bcm43xx_read16(bcm, BCM43xx_MMIO_TSF_2); |
| test1 = bcm43xx_read16(bcm, BCM43xx_MMIO_TSF_1); |
| } while (v3 != test3 || v2 != test2 || v1 != test1); |
| |
| *tsf = v3; |
| *tsf <<= 48; |
| tmp = v2; |
| tmp <<= 32; |
| *tsf |= tmp; |
| tmp = v1; |
| tmp <<= 16; |
| *tsf |= tmp; |
| *tsf |= v0; |
| } |
| } |
| |
| void bcm43xx_tsf_write(struct bcm43xx_private *bcm, u64 tsf) |
| { |
| u32 status; |
| |
| status = bcm43xx_read32(bcm, BCM43xx_MMIO_STATUS_BITFIELD); |
| status |= BCM43xx_SBF_TIME_UPDATE; |
| bcm43xx_write32(bcm, BCM43xx_MMIO_STATUS_BITFIELD, status); |
| mmiowb(); |
| |
| /* Be careful with the in-progress timer. |
| * First zero out the low register, so we have a full |
| * register-overflow duration to complete the operation. |
| */ |
| if (bcm->current_core->rev >= 3) { |
| u32 lo = (tsf & 0x00000000FFFFFFFFULL); |
| u32 hi = (tsf & 0xFFFFFFFF00000000ULL) >> 32; |
| |
| bcm43xx_write32(bcm, BCM43xx_MMIO_REV3PLUS_TSF_LOW, 0); |
| mmiowb(); |
| bcm43xx_write32(bcm, BCM43xx_MMIO_REV3PLUS_TSF_HIGH, hi); |
| mmiowb(); |
| bcm43xx_write32(bcm, BCM43xx_MMIO_REV3PLUS_TSF_LOW, lo); |
| } else { |
| u16 v0 = (tsf & 0x000000000000FFFFULL); |
| u16 v1 = (tsf & 0x00000000FFFF0000ULL) >> 16; |
| u16 v2 = (tsf & 0x0000FFFF00000000ULL) >> 32; |
| u16 v3 = (tsf & 0xFFFF000000000000ULL) >> 48; |
| |
| bcm43xx_write16(bcm, BCM43xx_MMIO_TSF_0, 0); |
| mmiowb(); |
| bcm43xx_write16(bcm, BCM43xx_MMIO_TSF_3, v3); |
| mmiowb(); |
| bcm43xx_write16(bcm, BCM43xx_MMIO_TSF_2, v2); |
| mmiowb(); |
| bcm43xx_write16(bcm, BCM43xx_MMIO_TSF_1, v1); |
| mmiowb(); |
| bcm43xx_write16(bcm, BCM43xx_MMIO_TSF_0, v0); |
| } |
| |
| status = bcm43xx_read32(bcm, BCM43xx_MMIO_STATUS_BITFIELD); |
| status &= ~BCM43xx_SBF_TIME_UPDATE; |
| bcm43xx_write32(bcm, BCM43xx_MMIO_STATUS_BITFIELD, status); |
| } |
| |
| static |
| void bcm43xx_macfilter_set(struct bcm43xx_private *bcm, |
| u16 offset, |
| const u8 *mac) |
| { |
| u16 data; |
| |
| offset |= 0x0020; |
| bcm43xx_write16(bcm, BCM43xx_MMIO_MACFILTER_CONTROL, offset); |
| |
| data = mac[0]; |
| data |= mac[1] << 8; |
| bcm43xx_write16(bcm, BCM43xx_MMIO_MACFILTER_DATA, data); |
| data = mac[2]; |
| data |= mac[3] << 8; |
| bcm43xx_write16(bcm, BCM43xx_MMIO_MACFILTER_DATA, data); |
| data = mac[4]; |
| data |= mac[5] << 8; |
| bcm43xx_write16(bcm, BCM43xx_MMIO_MACFILTER_DATA, data); |
| } |
| |
| static void bcm43xx_macfilter_clear(struct bcm43xx_private *bcm, |
| u16 offset) |
| { |
| const u8 zero_addr[ETH_ALEN] = { 0 }; |
| |
| bcm43xx_macfilter_set(bcm, offset, zero_addr); |
| } |
| |
| static void bcm43xx_write_mac_bssid_templates(struct bcm43xx_private *bcm) |
| { |
| const u8 *mac = (const u8 *)(bcm->net_dev->dev_addr); |
| const u8 *bssid = (const u8 *)(bcm->ieee->bssid); |
| u8 mac_bssid[ETH_ALEN * 2]; |
| int i; |
| |
| memcpy(mac_bssid, mac, ETH_ALEN); |
| memcpy(mac_bssid + ETH_ALEN, bssid, ETH_ALEN); |
| |
| /* Write our MAC address and BSSID to template ram */ |
| for (i = 0; i < ARRAY_SIZE(mac_bssid); i += sizeof(u32)) |
| bcm43xx_ram_write(bcm, 0x20 + i, *((u32 *)(mac_bssid + i))); |
| for (i = 0; i < ARRAY_SIZE(mac_bssid); i += sizeof(u32)) |
| bcm43xx_ram_write(bcm, 0x78 + i, *((u32 *)(mac_bssid + i))); |
| for (i = 0; i < ARRAY_SIZE(mac_bssid); i += sizeof(u32)) |
| bcm43xx_ram_write(bcm, 0x478 + i, *((u32 *)(mac_bssid + i))); |
| } |
| |
| //FIXME: Well, we should probably call them from somewhere. |
| #if 0 |
| static void bcm43xx_set_slot_time(struct bcm43xx_private *bcm, u16 slot_time) |
| { |
| /* slot_time is in usec. */ |
| if (bcm43xx_current_phy(bcm)->type != BCM43xx_PHYTYPE_G) |
| return; |
| bcm43xx_write16(bcm, 0x684, 510 + slot_time); |
| bcm43xx_shm_write16(bcm, BCM43xx_SHM_SHARED, 0x0010, slot_time); |
| } |
| |
| static void bcm43xx_short_slot_timing_enable(struct bcm43xx_private *bcm) |
| { |
| bcm43xx_set_slot_time(bcm, 9); |
| } |
| |
| static void bcm43xx_short_slot_timing_disable(struct bcm43xx_private *bcm) |
| { |
| bcm43xx_set_slot_time(bcm, 20); |
| } |
| #endif |
| |
| /* FIXME: To get the MAC-filter working, we need to implement the |
| * following functions (and rename them :) |
| */ |
| #if 0 |
| static void bcm43xx_disassociate(struct bcm43xx_private *bcm) |
| { |
| bcm43xx_mac_suspend(bcm); |
| bcm43xx_macfilter_clear(bcm, BCM43xx_MACFILTER_ASSOC); |
| |
| bcm43xx_ram_write(bcm, 0x0026, 0x0000); |
| bcm43xx_ram_write(bcm, 0x0028, 0x0000); |
| bcm43xx_ram_write(bcm, 0x007E, 0x0000); |
| bcm43xx_ram_write(bcm, 0x0080, 0x0000); |
| bcm43xx_ram_write(bcm, 0x047E, 0x0000); |
| bcm43xx_ram_write(bcm, 0x0480, 0x0000); |
| |
| if (bcm->current_core->rev < 3) { |
| bcm43xx_write16(bcm, 0x0610, 0x8000); |
| bcm43xx_write16(bcm, 0x060E, 0x0000); |
| } else |
| bcm43xx_write32(bcm, 0x0188, 0x80000000); |
| |
| bcm43xx_shm_write32(bcm, BCM43xx_SHM_WIRELESS, 0x0004, 0x000003ff); |
| |
| if (bcm43xx_current_phy(bcm)->type == BCM43xx_PHYTYPE_G && |
| ieee80211_is_ofdm_rate(bcm->softmac->txrates.default_rate)) |
| bcm43xx_short_slot_timing_enable(bcm); |
| |
| bcm43xx_mac_enable(bcm); |
| } |
| |
| static void bcm43xx_associate(struct bcm43xx_private *bcm, |
| const u8 *mac) |
| { |
| memcpy(bcm->ieee->bssid, mac, ETH_ALEN); |
| |
| bcm43xx_mac_suspend(bcm); |
| bcm43xx_macfilter_set(bcm, BCM43xx_MACFILTER_ASSOC, mac); |
| bcm43xx_write_mac_bssid_templates(bcm); |
| bcm43xx_mac_enable(bcm); |
| } |
| #endif |
| |
| /* Enable a Generic IRQ. "mask" is the mask of which IRQs to enable. |
| * Returns the _previously_ enabled IRQ mask. |
| */ |
| static inline u32 bcm43xx_interrupt_enable(struct bcm43xx_private *bcm, u32 mask) |
| { |
| u32 old_mask; |
| |
| old_mask = bcm43xx_read32(bcm, BCM43xx_MMIO_GEN_IRQ_MASK); |
| bcm43xx_write32(bcm, BCM43xx_MMIO_GEN_IRQ_MASK, old_mask | mask); |
| |
| return old_mask; |
| } |
| |
| /* Disable a Generic IRQ. "mask" is the mask of which IRQs to disable. |
| * Returns the _previously_ enabled IRQ mask. |
| */ |
| static inline u32 bcm43xx_interrupt_disable(struct bcm43xx_private *bcm, u32 mask) |
| { |
| u32 old_mask; |
| |
| old_mask = bcm43xx_read32(bcm, BCM43xx_MMIO_GEN_IRQ_MASK); |
| bcm43xx_write32(bcm, BCM43xx_MMIO_GEN_IRQ_MASK, old_mask & ~mask); |
| |
| return old_mask; |
| } |
| |
| /* Synchronize IRQ top- and bottom-half. |
| * IRQs must be masked before calling this. |
| * This must not be called with the irq_lock held. |
| */ |
| static void bcm43xx_synchronize_irq(struct bcm43xx_private *bcm) |
| { |
| synchronize_irq(bcm->irq); |
| tasklet_disable(&bcm->isr_tasklet); |
| } |
| |
| /* Make sure we don't receive more data from the device. */ |
| static int bcm43xx_disable_interrupts_sync(struct bcm43xx_private *bcm) |
| { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&bcm->irq_lock, flags); |
| if (unlikely(bcm43xx_status(bcm) != BCM43xx_STAT_INITIALIZED)) { |
| spin_unlock_irqrestore(&bcm->irq_lock, flags); |
| return -EBUSY; |
| } |
| bcm43xx_interrupt_disable(bcm, BCM43xx_IRQ_ALL); |
| bcm43xx_read32(bcm, BCM43xx_MMIO_GEN_IRQ_MASK); /* flush */ |
| spin_unlock_irqrestore(&bcm->irq_lock, flags); |
| bcm43xx_synchronize_irq(bcm); |
| |
| return 0; |
| } |
| |
| static int bcm43xx_read_radioinfo(struct bcm43xx_private *bcm) |
| { |
| struct bcm43xx_radioinfo *radio = bcm43xx_current_radio(bcm); |
| struct bcm43xx_phyinfo *phy = bcm43xx_current_phy(bcm); |
| u32 radio_id; |
| u16 manufact; |
| u16 version; |
| u8 revision; |
| |
| if (bcm->chip_id == 0x4317) { |
| if (bcm->chip_rev == 0x00) |
| radio_id = 0x3205017F; |
| else if (bcm->chip_rev == 0x01) |
| radio_id = 0x4205017F; |
| else |
| radio_id = 0x5205017F; |
| } else { |
| bcm43xx_write16(bcm, BCM43xx_MMIO_RADIO_CONTROL, BCM43xx_RADIOCTL_ID); |
| radio_id = bcm43xx_read16(bcm, BCM43xx_MMIO_RADIO_DATA_HIGH); |
| radio_id <<= 16; |
| bcm43xx_write16(bcm, BCM43xx_MMIO_RADIO_CONTROL, BCM43xx_RADIOCTL_ID); |
| radio_id |= bcm43xx_read16(bcm, BCM43xx_MMIO_RADIO_DATA_LOW); |
| } |
| |
| manufact = (radio_id & 0x00000FFF); |
| version = (radio_id & 0x0FFFF000) >> 12; |
| revision = (radio_id & 0xF0000000) >> 28; |
| |
| dprintk(KERN_INFO PFX "Detected Radio: ID: %x (Manuf: %x Ver: %x Rev: %x)\n", |
| radio_id, manufact, version, revision); |
| |
| switch (phy->type) { |
| case BCM43xx_PHYTYPE_A: |
| if ((version != 0x2060) || (revision != 1) || (manufact != 0x17f)) |
| goto err_unsupported_radio; |
| break; |
| case BCM43xx_PHYTYPE_B: |
| if ((version & 0xFFF0) != 0x2050) |
| goto err_unsupported_radio; |
| break; |
| case BCM43xx_PHYTYPE_G: |
| if (version != 0x2050) |
| goto err_unsupported_radio; |
| break; |
| } |
| |
| radio->manufact = manufact; |
| radio->version = version; |
| radio->revision = revision; |
| |
| if (phy->type == BCM43xx_PHYTYPE_A) |
| radio->txpower_desired = bcm->sprom.maxpower_aphy; |
| else |
| radio->txpower_desired = bcm->sprom.maxpower_bgphy; |
| |
| return 0; |
| |
| err_unsupported_radio: |
| printk(KERN_ERR PFX "Unsupported Radio connected to the PHY!\n"); |
| return -ENODEV; |
| } |
| |
| static const char * bcm43xx_locale_iso(u8 locale) |
| { |
| /* ISO 3166-1 country codes. |
| * Note that there aren't ISO 3166-1 codes for |
| * all or locales. (Not all locales are countries) |
| */ |
| switch (locale) { |
| case BCM43xx_LOCALE_WORLD: |
| case BCM43xx_LOCALE_ALL: |
| return "XX"; |
| case BCM43xx_LOCALE_THAILAND: |
| return "TH"; |
| case BCM43xx_LOCALE_ISRAEL: |
| return "IL"; |
| case BCM43xx_LOCALE_JORDAN: |
| return "JO"; |
| case BCM43xx_LOCALE_CHINA: |
| return "CN"; |
| case BCM43xx_LOCALE_JAPAN: |
| case BCM43xx_LOCALE_JAPAN_HIGH: |
| return "JP"; |
| case BCM43xx_LOCALE_USA_CANADA_ANZ: |
| case BCM43xx_LOCALE_USA_LOW: |
| return "US"; |
| case BCM43xx_LOCALE_EUROPE: |
| return "EU"; |
| case BCM43xx_LOCALE_NONE: |
| return " "; |
| } |
| assert(0); |
| return " "; |
| } |
| |
| static const char * bcm43xx_locale_string(u8 locale) |
| { |
| switch (locale) { |
| case BCM43xx_LOCALE_WORLD: |
| return "World"; |
| case BCM43xx_LOCALE_THAILAND: |
| return "Thailand"; |
| case BCM43xx_LOCALE_ISRAEL: |
| return "Israel"; |
| case BCM43xx_LOCALE_JORDAN: |
| return "Jordan"; |
| case BCM43xx_LOCALE_CHINA: |
| return "China"; |
| case BCM43xx_LOCALE_JAPAN: |
| return "Japan"; |
| case BCM43xx_LOCALE_USA_CANADA_ANZ: |
| return "USA/Canada/ANZ"; |
| case BCM43xx_LOCALE_EUROPE: |
| return "Europe"; |
| case BCM43xx_LOCALE_USA_LOW: |
| return "USAlow"; |
| case BCM43xx_LOCALE_JAPAN_HIGH: |
| return "JapanHigh"; |
| case BCM43xx_LOCALE_ALL: |
| return "All"; |
| case BCM43xx_LOCALE_NONE: |
| return "None"; |
| } |
| assert(0); |
| return ""; |
| } |
| |
| static inline u8 bcm43xx_crc8(u8 crc, u8 data) |
| { |
| static const u8 t[] = { |
| 0x00, 0xF7, 0xB9, 0x4E, 0x25, 0xD2, 0x9C, 0x6B, |
| 0x4A, 0xBD, 0xF3, 0x04, 0x6F, 0x98, 0xD6, 0x21, |
| 0x94, 0x63, 0x2D, 0xDA, 0xB1, 0x46, 0x08, 0xFF, |
| 0xDE, 0x29, 0x67, 0x90, 0xFB, 0x0C, 0x42, 0xB5, |
| 0x7F, 0x88, 0xC6, 0x31, 0x5A, 0xAD, 0xE3, 0x14, |
| 0x35, 0xC2, 0x8C, 0x7B, 0x10, 0xE7, 0xA9, 0x5E, |
| 0xEB, 0x1C, 0x52, 0xA5, 0xCE, 0x39, 0x77, 0x80, |
| 0xA1, 0x56, 0x18, 0xEF, 0x84, 0x73, 0x3D, 0xCA, |
| 0xFE, 0x09, 0x47, 0xB0, 0xDB, 0x2C, 0x62, 0x95, |
| 0xB4, 0x43, 0x0D, 0xFA, 0x91, 0x66, 0x28, 0xDF, |
| 0x6A, 0x9D, 0xD3, 0x24, 0x4F, 0xB8, 0xF6, 0x01, |
| 0x20, 0xD7, 0x99, 0x6E, 0x05, 0xF2, 0xBC, 0x4B, |
| 0x81, 0x76, 0x38, 0xCF, 0xA4, 0x53, 0x1D, 0xEA, |
| 0xCB, 0x3C, 0x72, 0x85, 0xEE, 0x19, 0x57, 0xA0, |
| 0x15, 0xE2, 0xAC, 0x5B, 0x30, 0xC7, 0x89, 0x7E, |
| 0x5F, 0xA8, 0xE6, 0x11, 0x7A, 0x8D, 0xC3, 0x34, |
| 0xAB, 0x5C, 0x12, 0xE5, 0x8E, 0x79, 0x37, 0xC0, |
| 0xE1, 0x16, 0x58, 0xAF, 0xC4, 0x33, 0x7D, 0x8A, |
| 0x3F, 0xC8, 0x86, 0x71, 0x1A, 0xED, 0xA3, 0x54, |
| 0x75, 0x82, 0xCC, 0x3B, 0x50, 0xA7, 0xE9, 0x1E, |
| 0xD4, 0x23, 0x6D, 0x9A, 0xF1, 0x06, 0x48, 0xBF, |
| 0x9E, 0x69, 0x27, 0xD0, 0xBB, 0x4C, 0x02, 0xF5, |
| 0x40, 0xB7, 0xF9, 0x0E, 0x65, 0x92, 0xDC, 0x2B, |
| 0x0A, 0xFD, 0xB3, 0x44, 0x2F, 0xD8, 0x96, 0x61, |
| 0x55, 0xA2, 0xEC, 0x1B, 0x70, 0x87, 0xC9, 0x3E, |
| 0x1F, 0xE8, 0xA6, 0x51, 0x3A, 0xCD, 0x83, 0x74, |
| 0xC1, 0x36, 0x78, 0x8F, 0xE4, 0x13, 0x5D, 0xAA, |
| 0x8B, 0x7C, 0x32, 0xC5, 0xAE, 0x59, 0x17, 0xE0, |
| 0x2A, 0xDD, 0x93, 0x64, 0x0F, 0xF8, 0xB6, 0x41, |
| 0x60, 0x97, 0xD9, 0x2E, 0x45, 0xB2, 0xFC, 0x0B, |
| 0xBE, 0x49, 0x07, 0xF0, 0x9B, 0x6C, 0x22, 0xD5, |
| 0xF4, 0x03, 0x4D, 0xBA, 0xD1, 0x26, 0x68, 0x9F, |
| }; |
| return t[crc ^ data]; |
| } |
| |
| static u8 bcm43xx_sprom_crc(const u16 *sprom) |
| { |
| int word; |
| u8 crc = 0xFF; |
| |
| for (word = 0; word < BCM43xx_SPROM_SIZE - 1; word++) { |
| crc = bcm43xx_crc8(crc, sprom[word] & 0x00FF); |
| crc = bcm43xx_crc8(crc, (sprom[word] & 0xFF00) >> 8); |
| } |
| crc = bcm43xx_crc8(crc, sprom[BCM43xx_SPROM_VERSION] & 0x00FF); |
| crc ^= 0xFF; |
| |
| return crc; |
| } |
| |
| int bcm43xx_sprom_read(struct bcm43xx_private *bcm, u16 *sprom) |
| { |
| int i; |
| u8 crc, expected_crc; |
| |
| for (i = 0; i < BCM43xx_SPROM_SIZE; i++) |
| sprom[i] = bcm43xx_read16(bcm, BCM43xx_SPROM_BASE + (i * 2)); |
| /* CRC-8 check. */ |
| crc = bcm43xx_sprom_crc(sprom); |
| expected_crc = (sprom[BCM43xx_SPROM_VERSION] & 0xFF00) >> 8; |
| if (crc != expected_crc) { |
| printk(KERN_WARNING PFX "WARNING: Invalid SPROM checksum " |
| "(0x%02X, expected: 0x%02X)\n", |
| crc, expected_crc); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| int bcm43xx_sprom_write(struct bcm43xx_private *bcm, const u16 *sprom) |
| { |
| int i, err; |
| u8 crc, expected_crc; |
| u32 spromctl; |
| |
| /* CRC-8 validation of the input data. */ |
| crc = bcm43xx_sprom_crc(sprom); |
| expected_crc = (sprom[BCM43xx_SPROM_VERSION] & 0xFF00) >> 8; |
| if (crc != expected_crc) { |
| printk(KERN_ERR PFX "SPROM input data: Invalid CRC\n"); |
| return -EINVAL; |
| } |
| |
| printk(KERN_INFO PFX "Writing SPROM. Do NOT turn off the power! Please stand by...\n"); |
| err = bcm43xx_pci_read_config32(bcm, BCM43xx_PCICFG_SPROMCTL, &spromctl); |
| if (err) |
| goto err_ctlreg; |
| spromctl |= 0x10; /* SPROM WRITE enable. */ |
| err = bcm43xx_pci_write_config32(bcm, BCM43xx_PCICFG_SPROMCTL, spromctl); |
| if (err) |
| goto err_ctlreg; |
| /* We must burn lots of CPU cycles here, but that does not |
| * really matter as one does not write the SPROM every other minute... |
| */ |
| printk(KERN_INFO PFX "[ 0%%"); |
| mdelay(500); |
| for (i = 0; i < BCM43xx_SPROM_SIZE; i++) { |
| if (i == 16) |
| printk("25%%"); |
| else if (i == 32) |
| printk("50%%"); |
| else if (i == 48) |
| printk("75%%"); |
| else if (i % 2) |
| printk("."); |
| bcm43xx_write16(bcm, BCM43xx_SPROM_BASE + (i * 2), sprom[i]); |
| mmiowb(); |
| mdelay(20); |
| } |
| spromctl &= ~0x10; /* SPROM WRITE enable. */ |
| err = bcm43xx_pci_write_config32(bcm, BCM43xx_PCICFG_SPROMCTL, spromctl); |
| if (err) |
| goto err_ctlreg; |
| mdelay(500); |
| printk("100%% ]\n"); |
| printk(KERN_INFO PFX "SPROM written.\n"); |
| bcm43xx_controller_restart(bcm, "SPROM update"); |
| |
| return 0; |
| err_ctlreg: |
| printk(KERN_ERR PFX "Could not access SPROM control register.\n"); |
| return -ENODEV; |
| } |
| |
| static int bcm43xx_sprom_extract(struct bcm43xx_private *bcm) |
| { |
| u16 value; |
| u16 *sprom; |
| |
| sprom = kzalloc(BCM43xx_SPROM_SIZE * sizeof(u16), |
| GFP_KERNEL); |
| if (!sprom) { |
| printk(KERN_ERR PFX "sprom_extract OOM\n"); |
| return -ENOMEM; |
| } |
| bcm43xx_sprom_read(bcm, sprom); |
| |
| /* boardflags2 */ |
| value = sprom[BCM43xx_SPROM_BOARDFLAGS2]; |
| bcm->sprom.boardflags2 = value; |
| |
| /* il0macaddr */ |
| value = sprom[BCM43xx_SPROM_IL0MACADDR + 0]; |
| *(((u16 *)bcm->sprom.il0macaddr) + 0) = cpu_to_be16(value); |
| value = sprom[BCM43xx_SPROM_IL0MACADDR + 1]; |
| *(((u16 *)bcm->sprom.il0macaddr) + 1) = cpu_to_be16(value); |
| value = sprom[BCM43xx_SPROM_IL0MACADDR + 2]; |
| *(((u16 *)bcm->sprom.il0macaddr) + 2) = cpu_to_be16(value); |
| |
| /* et0macaddr */ |
| value = sprom[BCM43xx_SPROM_ET0MACADDR + 0]; |
| *(((u16 *)bcm->sprom.et0macaddr) + 0) = cpu_to_be16(value); |
| value = sprom[BCM43xx_SPROM_ET0MACADDR + 1]; |
| *(((u16 *)bcm->sprom.et0macaddr) + 1) = cpu_to_be16(value); |
| value = sprom[BCM43xx_SPROM_ET0MACADDR + 2]; |
| *(((u16 *)bcm->sprom.et0macaddr) + 2) = cpu_to_be16(value); |
| |
| /* et1macaddr */ |
| value = sprom[BCM43xx_SPROM_ET1MACADDR + 0]; |
| *(((u16 *)bcm->sprom.et1macaddr) + 0) = cpu_to_be16(value); |
| value = sprom[BCM43xx_SPROM_ET1MACADDR + 1]; |
| *(((u16 *)bcm->sprom.et1macaddr) + 1) = cpu_to_be16(value); |
| value = sprom[BCM43xx_SPROM_ET1MACADDR + 2]; |
| *(((u16 *)bcm->sprom.et1macaddr) + 2) = cpu_to_be16(value); |
| |
| /* ethernet phy settings */ |
| value = sprom[BCM43xx_SPROM_ETHPHY]; |
| bcm->sprom.et0phyaddr = (value & 0x001F); |
| bcm->sprom.et1phyaddr = (value & 0x03E0) >> 5; |
| |
| /* boardrev, antennas, locale */ |
| value = sprom[BCM43xx_SPROM_BOARDREV]; |
| bcm->sprom.boardrev = (value & 0x00FF); |
| bcm->sprom.locale = (value & 0x0F00) >> 8; |
| bcm->sprom.antennas_aphy = (value & 0x3000) >> 12; |
| bcm->sprom.antennas_bgphy = (value & 0xC000) >> 14; |
| if (modparam_locale != -1) { |
| if (modparam_locale >= 0 && modparam_locale <= 11) { |
| bcm->sprom.locale = modparam_locale; |
| printk(KERN_WARNING PFX "Operating with modified " |
| "LocaleCode %u (%s)\n", |
| bcm->sprom.locale, |
| bcm43xx_locale_string(bcm->sprom.locale)); |
| } else { |
| printk(KERN_WARNING PFX "Module parameter \"locale\" " |
| "invalid value. (0 - 11)\n"); |
| } |
| } |
| |
| /* pa0b* */ |
| value = sprom[BCM43xx_SPROM_PA0B0]; |
| bcm->sprom.pa0b0 = value; |
| value = sprom[BCM43xx_SPROM_PA0B1]; |
| bcm->sprom.pa0b1 = value; |
| value = sprom[BCM43xx_SPROM_PA0B2]; |
| bcm->sprom.pa0b2 = value; |
| |
| /* wl0gpio* */ |
| value = sprom[BCM43xx_SPROM_WL0GPIO0]; |
| if (value == 0x0000) |
| value = 0xFFFF; |
| bcm->sprom.wl0gpio0 = value & 0x00FF; |
| bcm->sprom.wl0gpio1 = (value & 0xFF00) >> 8; |
| value = sprom[BCM43xx_SPROM_WL0GPIO2]; |
| if (value == 0x0000) |
| value = 0xFFFF; |
| bcm->sprom.wl0gpio2 = value & 0x00FF; |
| bcm->sprom.wl0gpio3 = (value & 0xFF00) >> 8; |
| |
| /* maxpower */ |
| value = sprom[BCM43xx_SPROM_MAXPWR]; |
| bcm->sprom.maxpower_aphy = (value & 0xFF00) >> 8; |
| bcm->sprom.maxpower_bgphy = value & 0x00FF; |
| |
| /* pa1b* */ |
| value = sprom[BCM43xx_SPROM_PA1B0]; |
| bcm->sprom.pa1b0 = value; |
| value = sprom[BCM43xx_SPROM_PA1B1]; |
| bcm->sprom.pa1b1 = value; |
| value = sprom[BCM43xx_SPROM_PA1B2]; |
| bcm->sprom.pa1b2 = value; |
| |
| /* idle tssi target */ |
| value = sprom[BCM43xx_SPROM_IDL_TSSI_TGT]; |
| bcm->sprom.idle_tssi_tgt_aphy = value & 0x00FF; |
| bcm->sprom.idle_tssi_tgt_bgphy = (value & 0xFF00) >> 8; |
| |
| /* boardflags */ |
| value = sprom[BCM43xx_SPROM_BOARDFLAGS]; |
| if (value == 0xFFFF) |
| value = 0x0000; |
| bcm->sprom.boardflags = value; |
| /* boardflags workarounds */ |
| if (bcm->board_vendor == PCI_VENDOR_ID_DELL && |
| bcm->chip_id == 0x4301 && |
| bcm->board_revision == 0x74) |
| bcm->sprom.boardflags |= BCM43xx_BFL_BTCOEXIST; |
| if (bcm->board_vendor == PCI_VENDOR_ID_APPLE && |
| bcm->board_type == 0x4E && |
| bcm->board_revision > 0x40) |
| bcm->sprom.boardflags |= BCM43xx_BFL_PACTRL; |
| |
| /* antenna gain */ |
| value = sprom[BCM43xx_SPROM_ANTENNA_GAIN]; |
| if (value == 0x0000 || value == 0xFFFF) |
| value = 0x0202; |
| /* convert values to Q5.2 */ |
| bcm->sprom.antennagain_aphy = ((value & 0xFF00) >> 8) * 4; |
| bcm->sprom.antennagain_bgphy = (value & 0x00FF) * 4; |
| |
| kfree(sprom); |
| |
| return 0; |
| } |
| |
| static int bcm43xx_geo_init(struct bcm43xx_private *bcm) |
| { |
| struct ieee80211_geo *geo; |
| struct ieee80211_channel *chan; |
| int have_a = 0, have_bg = 0; |
| int i; |
| u8 channel; |
| struct bcm43xx_phyinfo *phy; |
| const char *iso_country; |
| u8 max_bg_channel; |
| |
| geo = kzalloc(sizeof(*geo), GFP_KERNEL); |
| if (!geo) |
| return -ENOMEM; |
| |
| for (i = 0; i < bcm->nr_80211_available; i++) { |
| phy = &(bcm->core_80211_ext[i].phy); |
| switch (phy->type) { |
| case BCM43xx_PHYTYPE_B: |
| case BCM43xx_PHYTYPE_G: |
| have_bg = 1; |
| break; |
| case BCM43xx_PHYTYPE_A: |
| have_a = 1; |
| break; |
| default: |
| assert(0); |
| } |
| } |
| iso_country = bcm43xx_locale_iso(bcm->sprom.locale); |
| |
| /* set the maximum channel based on locale set in sprom or witle locale option */ |
| switch (bcm->sprom.locale) { |
| case BCM43xx_LOCALE_THAILAND: |
| case BCM43xx_LOCALE_ISRAEL: |
| case BCM43xx_LOCALE_JORDAN: |
| case BCM43xx_LOCALE_USA_CANADA_ANZ: |
| case BCM43xx_LOCALE_USA_LOW: |
| max_bg_channel = 11; |
| break; |
| case BCM43xx_LOCALE_JAPAN: |
| case BCM43xx_LOCALE_JAPAN_HIGH: |
| max_bg_channel = 14; |
| break; |
| default: |
| max_bg_channel = 13; |
| } |
| |
| if (have_a) { |
| for (i = 0, channel = IEEE80211_52GHZ_MIN_CHANNEL; |
| channel <= IEEE80211_52GHZ_MAX_CHANNEL; channel++) { |
| chan = &geo->a[i++]; |
| chan->freq = bcm43xx_channel_to_freq_a(channel); |
| chan->channel = channel; |
| } |
| geo->a_channels = i; |
| } |
| if (have_bg) { |
| for (i = 0, channel = IEEE80211_24GHZ_MIN_CHANNEL; |
| channel <= max_bg_channel; channel++) { |
| chan = &geo->bg[i++]; |
| chan->freq = bcm43xx_channel_to_freq_bg(channel); |
| chan->channel = channel; |
| } |
| geo->bg_channels = i; |
| } |
| memcpy(geo->name, iso_country, 2); |
| if (0 /*TODO: Outdoor use only */) |
| geo->name[2] = 'O'; |
| else if (0 /*TODO: Indoor use only */) |
| geo->name[2] = 'I'; |
| else |
| geo->name[2] = ' '; |
| geo->name[3] = '\0'; |
| |
| ieee80211_set_geo(bcm->ieee, geo); |
| kfree(geo); |
| |
| return 0; |
| } |
| |
| /* DummyTransmission function, as documented on |
| * http://bcm-specs.sipsolutions.net/DummyTransmission |
| */ |
| void bcm43xx_dummy_transmission(struct bcm43xx_private *bcm) |
| { |
| struct bcm43xx_phyinfo *phy = bcm43xx_current_phy(bcm); |
| struct bcm43xx_radioinfo *radio = bcm43xx_current_radio(bcm); |
| unsigned int i, max_loop; |
| u16 value = 0; |
| u32 buffer[5] = { |
| 0x00000000, |
| 0x0000D400, |
| 0x00000000, |
| 0x00000001, |
| 0x00000000, |
| }; |
| |
| switch (phy->type) { |
| case BCM43xx_PHYTYPE_A: |
| max_loop = 0x1E; |
| buffer[0] = 0xCC010200; |
| break; |
| case BCM43xx_PHYTYPE_B: |
| case BCM43xx_PHYTYPE_G: |
| max_loop = 0xFA; |
| buffer[0] = 0x6E840B00; |
| break; |
| default: |
| assert(0); |
| return; |
| } |
| |
| for (i = 0; i < 5; i++) |
| bcm43xx_ram_write(bcm, i * 4, buffer[i]); |
| |
| bcm43xx_read32(bcm, BCM43xx_MMIO_STATUS_BITFIELD); /* dummy read */ |
| |
| bcm43xx_write16(bcm, 0x0568, 0x0000); |
| bcm43xx_write16(bcm, 0x07C0, 0x0000); |
| bcm43xx_write16(bcm, 0x050C, ((phy->type == BCM43xx_PHYTYPE_A) ? 1 : 0)); |
| bcm43xx_write16(bcm, 0x0508, 0x0000); |
| bcm43xx_write16(bcm, 0x050A, 0x0000); |
| bcm43xx_write16(bcm, 0x054C, 0x0000); |
| bcm43xx_write16(bcm, 0x056A, 0x0014); |
| bcm43xx_write16(bcm, 0x0568, 0x0826); |
| bcm43xx_write16(bcm, 0x0500, 0x0000); |
| bcm43xx_write16(bcm, 0x0502, 0x0030); |
| |
| if (radio->version == 0x2050 && radio->revision <= 0x5) |
| bcm43xx_radio_write16(bcm, 0x0051, 0x0017); |
| for (i = 0x00; i < max_loop; i++) { |
| value = bcm43xx_read16(bcm, 0x050E); |
| if (value & 0x0080) |
| break; |
| udelay(10); |
| } |
| for (i = 0x00; i < 0x0A; i++) { |
| value = bcm43xx_read16(bcm, 0x050E); |
| if (value & 0x0400) |
| break; |
| udelay(10); |
| } |
| for (i = 0x00; i < 0x0A; i++) { |
| value = bcm43xx_read16(bcm, 0x0690); |
| if (!(value & 0x0100)) |
| break; |
| udelay(10); |
| } |
| if (radio->version == 0x2050 && radio->revision <= 0x5) |
| bcm43xx_radio_write16(bcm, 0x0051, 0x0037); |
| } |
| |
| static void key_write(struct bcm43xx_private *bcm, |
| u8 index, u8 algorithm, const u16 *key) |
| { |
| unsigned int i, basic_wep = 0; |
| u32 offset; |
| u16 value; |
| |
| /* Write associated key information */ |
| bcm43xx_shm_write16(bcm, BCM43xx_SHM_SHARED, 0x100 + (index * 2), |
| ((index << 4) | (algorithm & 0x0F))); |
| |
| /* The first 4 WEP keys need extra love */ |
| if (((algorithm == BCM43xx_SEC_ALGO_WEP) || |
| (algorithm == BCM43xx_SEC_ALGO_WEP104)) && (index < 4)) |
| basic_wep = 1; |
| |
| /* Write key payload, 8 little endian words */ |
| offset = bcm->security_offset + (index * BCM43xx_SEC_KEYSIZE); |
| for (i = 0; i < (BCM43xx_SEC_KEYSIZE / sizeof(u16)); i++) { |
| value = cpu_to_le16(key[i]); |
| bcm43xx_shm_write16(bcm, BCM43xx_SHM_SHARED, |
| offset + (i * 2), value); |
| |
| if (!basic_wep) |
| continue; |
| |
| bcm43xx_shm_write16(bcm, BCM43xx_SHM_SHARED, |
| offset + (i * 2) + 4 * BCM43xx_SEC_KEYSIZE, |
| value); |
| } |
| } |
| |
| static void keymac_write(struct bcm43xx_private *bcm, |
| u8 index, const u32 *addr) |
| { |
| /* for keys 0-3 there is no associated mac address */ |
| if (index < 4) |
| return; |
| |
| index -= 4; |
| if (bcm->current_core->rev >= 5) { |
| bcm43xx_shm_write32(bcm, |
| BCM43xx_SHM_HWMAC, |
| index * 2, |
| cpu_to_be32(*addr)); |
| bcm43xx_shm_write16(bcm, |
| BCM43xx_SHM_HWMAC, |
| (index * 2) + 1, |
| cpu_to_be16(*((u16 *)(addr + 1)))); |
| } else { |
| if (index < 8) { |
| TODO(); /* Put them in the macaddress filter */ |
| } else { |
| TODO(); |
| /* Put them BCM43xx_SHM_SHARED, stating index 0x0120. |
| Keep in mind to update the count of keymacs in 0x003E as well! */ |
| } |
| } |
| } |
| |
| static int bcm43xx_key_write(struct bcm43xx_private *bcm, |
| u8 index, u8 algorithm, |
| const u8 *_key, int key_len, |
| const u8 *mac_addr) |
| { |
| u8 key[BCM43xx_SEC_KEYSIZE] = { 0 }; |
| |
| if (index >= ARRAY_SIZE(bcm->key)) |
| return -EINVAL; |
| if (key_len > ARRAY_SIZE(key)) |
| return -EINVAL; |
| if (algorithm < 1 || algorithm > 5) |
| return -EINVAL; |
| |
| memcpy(key, _key, key_len); |
| key_write(bcm, index, algorithm, (const u16 *)key); |
| keymac_write(bcm, index, (const u32 *)mac_addr); |
| |
| bcm->key[index].algorithm = algorithm; |
| |
| return 0; |
| } |
| |
| static void bcm43xx_clear_keys(struct bcm43xx_private *bcm) |
| { |
| static const u32 zero_mac[2] = { 0 }; |
| unsigned int i,j, nr_keys = 54; |
| u16 offset; |
| |
| if (bcm->current_core->rev < 5) |
| nr_keys = 16; |
| assert(nr_keys <= ARRAY_SIZE(bcm->key)); |
| |
| for (i = 0; i < nr_keys; i++) { |
| bcm->key[i].enabled = 0; |
| /* returns for i < 4 immediately */ |
| keymac_write(bcm, i, zero_mac); |
| bcm43xx_shm_write16(bcm, BCM43xx_SHM_SHARED, |
| 0x100 + (i * 2), 0x0000); |
| for (j = 0; j < 8; j++) { |
| offset = bcm->security_offset + (j * 4) + (i * BCM43xx_SEC_KEYSIZE); |
| bcm43xx_shm_write16(bcm, BCM43xx_SHM_SHARED, |
| offset, 0x0000); |
| } |
| } |
| dprintk(KERN_INFO PFX "Keys cleared\n"); |
| } |
| |
| /* Lowlevel core-switch function. This is only to be used in |
| * bcm43xx_switch_core() and bcm43xx_probe_cores() |
| */ |
| static int _switch_core(struct bcm43xx_private *bcm, int core) |
| { |
| int err; |
| int attempts = 0; |
| u32 current_core; |
| |
| assert(core >= 0); |
| while (1) { |
| err = bcm43xx_pci_write_config32(bcm, BCM43xx_PCICFG_ACTIVE_CORE, |
| (core * 0x1000) + 0x18000000); |
| if (unlikely(err)) |
| goto error; |
| err = bcm43xx_pci_read_config32(bcm, BCM43xx_PCICFG_ACTIVE_CORE, |
| ¤t_core); |
| if (unlikely(err)) |
| goto error; |
| current_core = (current_core - 0x18000000) / 0x1000; |
| if (current_core == core) |
| break; |
| |
| if (unlikely(attempts++ > BCM43xx_SWITCH_CORE_MAX_RETRIES)) |
| goto error; |
| udelay(10); |
| } |
| |
| return 0; |
| error: |
| printk(KERN_ERR PFX "Failed to switch to core %d\n", core); |
| return -ENODEV; |
| } |
| |
| int bcm43xx_switch_core(struct bcm43xx_private *bcm, struct bcm43xx_coreinfo *new_core) |
| { |
| int err; |
| |
| if (unlikely(!new_core)) |
| return 0; |
| if (!new_core->available) |
| return -ENODEV; |
| if (bcm->current_core == new_core) |
| return 0; |
| err = _switch_core(bcm, new_core->index); |
| if (unlikely(err)) |
| goto out; |
| |
| bcm->current_core = new_core; |
| out: |
| return err; |
| } |
| |
| static int bcm43xx_core_enabled(struct bcm43xx_private *bcm) |
| { |
| u32 value; |
| |
| value = bcm43xx_read32(bcm, BCM43xx_CIR_SBTMSTATELOW); |
| value &= BCM43xx_SBTMSTATELOW_CLOCK | BCM43xx_SBTMSTATELOW_RESET |
| | BCM43xx_SBTMSTATELOW_REJECT; |
| |
| return (value == BCM43xx_SBTMSTATELOW_CLOCK); |
| } |
| |
| /* disable current core */ |
| static int bcm43xx_core_disable(struct bcm43xx_private *bcm, u32 core_flags) |
| { |
| u32 sbtmstatelow; |
| u32 sbtmstatehigh; |
| int i; |
| |
| /* fetch sbtmstatelow from core information registers */ |
| sbtmstatelow = bcm43xx_read32(bcm, BCM43xx_CIR_SBTMSTATELOW); |
| |
| /* core is already in reset */ |
| if (sbtmstatelow & BCM43xx_SBTMSTATELOW_RESET) |
| goto out; |
| |
| if (sbtmstatelow & BCM43xx_SBTMSTATELOW_CLOCK) { |
| sbtmstatelow = BCM43xx_SBTMSTATELOW_CLOCK | |
| BCM43xx_SBTMSTATELOW_REJECT; |
| bcm43xx_write32(bcm, BCM43xx_CIR_SBTMSTATELOW, sbtmstatelow); |
| |
| for (i = 0; i < 1000; i++) { |
| sbtmstatelow = bcm43xx_read32(bcm, BCM43xx_CIR_SBTMSTATELOW); |
| if (sbtmstatelow & BCM43xx_SBTMSTATELOW_REJECT) { |
| i = -1; |
| break; |
| } |
| udelay(10); |
| } |
| if (i != -1) { |
| printk(KERN_ERR PFX "Error: core_disable() REJECT timeout!\n"); |
| return -EBUSY; |
| } |
| |
| for (i = 0; i < 1000; i++) { |
| sbtmstatehigh = bcm43xx_read32(bcm, BCM43xx_CIR_SBTMSTATEHIGH); |
| if (!(sbtmstatehigh & BCM43xx_SBTMSTATEHIGH_BUSY)) { |
| i = -1; |
| break; |
| } |
| udelay(10); |
| } |
| if (i != -1) { |
| printk(KERN_ERR PFX "Error: core_disable() BUSY timeout!\n"); |
| return -EBUSY; |
| } |
| |
| sbtmstatelow = BCM43xx_SBTMSTATELOW_FORCE_GATE_CLOCK | |
| BCM43xx_SBTMSTATELOW_REJECT | |
| BCM43xx_SBTMSTATELOW_RESET | |
| BCM43xx_SBTMSTATELOW_CLOCK | |
| core_flags; |
| bcm43xx_write32(bcm, BCM43xx_CIR_SBTMSTATELOW, sbtmstatelow); |
| udelay(10); |
| } |
| |
| sbtmstatelow = BCM43xx_SBTMSTATELOW_RESET | |
| BCM43xx_SBTMSTATELOW_REJECT | |
| core_flags; |
| bcm43xx_write32(bcm, BCM43xx_CIR_SBTMSTATELOW, sbtmstatelow); |
| |
| out: |
| bcm->current_core->enabled = 0; |
| |
| return 0; |
| } |
| |
| /* enable (reset) current core */ |
| static int bcm43xx_core_enable(struct bcm43xx_private *bcm, u32 core_flags) |
| { |
| u32 sbtmstatelow; |
| u32 sbtmstatehigh; |
| u32 sbimstate; |
| int err; |
| |
| err = bcm43xx_core_disable(bcm, core_flags); |
| if (err) |
| goto out; |
| |
| sbtmstatelow = BCM43xx_SBTMSTATELOW_CLOCK | |
| BCM43xx_SBTMSTATELOW_RESET | |
| BCM43xx_SBTMSTATELOW_FORCE_GATE_CLOCK | |
| core_flags; |
| bcm43xx_write32(bcm, BCM43xx_CIR_SBTMSTATELOW, sbtmstatelow); |
| udelay(1); |
| |
| sbtmstatehigh = bcm43xx_read32(bcm, BCM43xx_CIR_SBTMSTATEHIGH); |
| if (sbtmstatehigh & BCM43xx_SBTMSTATEHIGH_SERROR) { |
| sbtmstatehigh = 0x00000000; |
| bcm43xx_write32(bcm, BCM43xx_CIR_SBTMSTATEHIGH, sbtmstatehigh); |
| } |
| |
| sbimstate = bcm43xx_read32(bcm, BCM43xx_CIR_SBIMSTATE); |
| if (sbimstate & (BCM43xx_SBIMSTATE_IB_ERROR | BCM43xx_SBIMSTATE_TIMEOUT)) { |
| sbimstate &= ~(BCM43xx_SBIMSTATE_IB_ERROR | BCM43xx_SBIMSTATE_TIMEOUT); |
| bcm43xx_write32(bcm, BCM43xx_CIR_SBIMSTATE, sbimstate); |
| } |
| |
| sbtmstatelow = BCM43xx_SBTMSTATELOW_CLOCK | |
| BCM43xx_SBTMSTATELOW_FORCE_GATE_CLOCK | |
| core_flags; |
| bcm43xx_write32(bcm, BCM43xx_CIR_SBTMSTATELOW, sbtmstatelow); |
| udelay(1); |
| |
| sbtmstatelow = BCM43xx_SBTMSTATELOW_CLOCK | core_flags; |
| bcm43xx_write32(bcm, BCM43xx_CIR_SBTMSTATELOW, sbtmstatelow); |
| udelay(1); |
| |
| bcm->current_core->enabled = 1; |
| assert(err == 0); |
| out: |
| return err; |
| } |
| |
| /* http://bcm-specs.sipsolutions.net/80211CoreReset */ |
| void bcm43xx_wireless_core_reset(struct bcm43xx_private *bcm, int connect_phy) |
| { |
| u32 flags = 0x00040000; |
| |
| if ((bcm43xx_core_enabled(bcm)) && |
| !bcm43xx_using_pio(bcm)) { |
| } |
| if (bcm43xx_status(bcm) == BCM43xx_STAT_SHUTTINGDOWN) { |
| bcm43xx_write32(bcm, BCM43xx_MMIO_STATUS_BITFIELD, |
| bcm43xx_read32(bcm, BCM43xx_MMIO_STATUS_BITFIELD) |
| & ~(BCM43xx_SBF_MAC_ENABLED | 0x00000002)); |
| } else { |
| if (connect_phy) |
| flags |= BCM43xx_SBTMSTATELOW_G_MODE_ENABLE; |
| bcm43xx_phy_connect(bcm, connect_phy); |
| bcm43xx_core_enable(bcm, flags); |
| bcm43xx_write16(bcm, 0x03E6, 0x0000); |
| bcm43xx_write32(bcm, BCM43xx_MMIO_STATUS_BITFIELD, |
| bcm43xx_read32(bcm, BCM43xx_MMIO_STATUS_BITFIELD) |
| | BCM43xx_SBF_400); |
| } |
| } |
| |
| static void bcm43xx_wireless_core_disable(struct bcm43xx_private *bcm) |
| { |
| bcm43xx_radio_turn_off(bcm); |
| bcm43xx_write16(bcm, 0x03E6, 0x00F4); |
| bcm43xx_core_disable(bcm, 0); |
| } |
| |
| /* Mark the current 80211 core inactive. */ |
| static void bcm43xx_wireless_core_mark_inactive(struct bcm43xx_private *bcm) |
| { |
| u32 sbtmstatelow; |
| |
| bcm43xx_interrupt_disable(bcm, BCM43xx_IRQ_ALL); |
| bcm43xx_radio_turn_off(bcm); |
| sbtmstatelow = bcm43xx_read32(bcm, BCM43xx_CIR_SBTMSTATELOW); |
| sbtmstatelow &= 0xDFF5FFFF; |
| sbtmstatelow |= 0x000A0000; |
| bcm43xx_write32(bcm, BCM43xx_CIR_SBTMSTATELOW, sbtmstatelow); |
| udelay(1); |
| sbtmstatelow = bcm43xx_read32(bcm, BCM43xx_CIR_SBTMSTATELOW); |
| sbtmstatelow &= 0xFFF5FFFF; |
| sbtmstatelow |= 0x00080000; |
| bcm43xx_write32(bcm, BCM43xx_CIR_SBTMSTATELOW, sbtmstatelow); |
| udelay(1); |
| } |
| |
| static void handle_irq_transmit_status(struct bcm43xx_private *bcm) |
| { |
| u32 v0, v1; |
| u16 tmp; |
| struct bcm43xx_xmitstatus stat; |
| |
| while (1) { |
| v0 = bcm43xx_read32(bcm, BCM43xx_MMIO_XMITSTAT_0); |
| if (!v0) |
| break; |
| v1 = bcm43xx_read32(bcm, BCM43xx_MMIO_XMITSTAT_1); |
| |
| stat.cookie = (v0 >> 16) & 0x0000FFFF; |
| tmp = (u16)((v0 & 0xFFF0) | ((v0 & 0xF) >> 1)); |
| stat.flags = tmp & 0xFF; |
| stat.cnt1 = (tmp & 0x0F00) >> 8; |
| stat.cnt2 = (tmp & 0xF000) >> 12; |
| stat.seq = (u16)(v1 & 0xFFFF); |
| stat.unknown = (u16)((v1 >> 16) & 0xFF); |
| |
| bcm43xx_debugfs_log_txstat(bcm, &stat); |
| |
| if (stat.flags & BCM43xx_TXSTAT_FLAG_AMPDU) |
| continue; |
| if (stat.flags & BCM43xx_TXSTAT_FLAG_INTER) |
| continue; |
| |
| if (bcm43xx_using_pio(bcm)) |
| bcm43xx_pio_handle_xmitstatus(bcm, &stat); |
| else |
| bcm43xx_dma_handle_xmitstatus(bcm, &stat); |
| } |
| } |
| |
| static void drain_txstatus_queue(struct bcm43xx_private *bcm) |
| { |
| u32 dummy; |
| |
| if (bcm->current_core->rev < 5) |
| return; |
| /* Read all entries from the microcode TXstatus FIFO |
| * and throw them away. |
| */ |
| while (1) { |
| dummy = bcm43xx_read32(bcm, BCM43xx_MMIO_XMITSTAT_0); |
| if (!dummy) |
| break; |
| dummy = bcm43xx_read32(bcm, BCM43xx_MMIO_XMITSTAT_1); |
| } |
| } |
| |
| static void bcm43xx_generate_noise_sample(struct bcm43xx_private *bcm) |
| { |
| bcm43xx_shm_write16(bcm, BCM43xx_SHM_SHARED, 0x408, 0x7F7F); |
| bcm43xx_shm_write16(bcm, BCM43xx_SHM_SHARED, 0x40A, 0x7F7F); |
| bcm43xx_write32(bcm, BCM43xx_MMIO_STATUS2_BITFIELD, |
| bcm43xx_read32(bcm, BCM43xx_MMIO_STATUS2_BITFIELD) | (1 << 4)); |
| assert(bcm->noisecalc.core_at_start == bcm->current_core); |
| assert(bcm->noisecalc.channel_at_start == bcm43xx_current_radio(bcm)->channel); |
| } |
| |
| static void bcm43xx_calculate_link_quality(struct bcm43xx_private *bcm) |
| { |
| /* Top half of Link Quality calculation. */ |
| |
| if (bcm->noisecalc.calculation_running) |
| return; |
| bcm->noisecalc.core_at_start = bcm->current_core; |
| bcm->noisecalc.channel_at_start = bcm43xx_current_radio(bcm)->channel; |
| bcm->noisecalc.calculation_running = 1; |
| bcm->noisecalc.nr_samples = 0; |
| |
| bcm43xx_generate_noise_sample(bcm); |
| } |
| |
| static void handle_irq_noise(struct bcm43xx_private *bcm) |
| { |
| struct bcm43xx_radioinfo *radio = bcm43xx_current_radio(bcm); |
| u16 tmp; |
| u8 noise[4]; |
| u8 i, j; |
| s32 average; |
| |
| /* Bottom half of Link Quality calculation. */ |
| |
| assert(bcm->noisecalc.calculation_running); |
| if (bcm->noisecalc.core_at_start != bcm->current_core || |
| bcm->noisecalc.channel_at_start != radio->channel) |
| goto drop_calculation; |
| tmp = bcm43xx_shm_read16(bcm, BCM43xx_SHM_SHARED, 0x408); |
| noise[0] = (tmp & 0x00FF); |
| noise[1] = (tmp & 0xFF00) >> 8; |
| tmp = bcm43xx_shm_read16(bcm, BCM43xx_SHM_SHARED, 0x40A); |
| noise[2] = (tmp & 0x00FF); |
| noise[3] = (tmp & 0xFF00) >> 8; |
| if (noise[0] == 0x7F || noise[1] == 0x7F || |
| noise[2] == 0x7F || noise[3] == 0x7F) |
| goto generate_new; |
| |
| /* Get the noise samples. */ |
| assert(bcm->noisecalc.nr_samples < 8); |
| i = bcm->noisecalc.nr_samples; |
| noise[0] = limit_value(noise[0], 0, ARRAY_SIZE(radio->nrssi_lt) - 1); |
| noise[1] = limit_value(noise[1], 0, ARRAY_SIZE(radio->nrssi_lt) - 1); |
| noise[2] = limit_value(noise[2], 0, ARRAY_SIZE(radio->nrssi_lt) - 1); |
| noise[3] = limit_value(noise[3], 0, ARRAY_SIZE(radio->nrssi_lt) - 1); |
| bcm->noisecalc.samples[i][0] = radio->nrssi_lt[noise[0]]; |
| bcm->noisecalc.samples[i][1] = radio->nrssi_lt[noise[1]]; |
| bcm->noisecalc.samples[i][2] = radio->nrssi_lt[noise[2]]; |
| bcm->noisecalc.samples[i][3] = radio->nrssi_lt[noise[3]]; |
| bcm->noisecalc.nr_samples++; |
| if (bcm->noisecalc.nr_samples == 8) { |
| /* Calculate the Link Quality by the noise samples. */ |
| average = 0; |
| for (i = 0; i < 8; i++) { |
| for (j = 0; j < 4; j++) |
| average += bcm->noisecalc.samples[i][j]; |
| } |
| average /= (8 * 4); |
| average *= 125; |
| average += 64; |
| average /= 128; |
| |
| tmp = bcm43xx_shm_read16(bcm, BCM43xx_SHM_SHARED, 0x40C); |
| tmp = (tmp / 128) & 0x1F; |
| if (tmp >= 8) |
| average += 2; |
| else |
| average -= 25; |
| if (tmp == 8) |
| average -= 72; |
| else |
| average -= 48; |
| |
| bcm->stats.noise = average; |
| drop_calculation: |
| bcm->noisecalc.calculation_running = 0; |
| return; |
| } |
| generate_new: |
| bcm43xx_generate_noise_sample(bcm); |
| } |
| |
| static void handle_irq_ps(struct bcm43xx_private *bcm) |
| { |
| if (bcm->ieee->iw_mode == IW_MODE_MASTER) { |
| ///TODO: PS TBTT |
| } else { |
| if (1/*FIXME: the last PSpoll frame was sent successfully */) |
| bcm43xx_power_saving_ctl_bits(bcm, -1, -1); |
| } |
| if (bcm->ieee->iw_mode == IW_MODE_ADHOC) |
| bcm->reg124_set_0x4 = 1; |
| //FIXME else set to false? |
| } |
| |
| static void handle_irq_reg124(struct bcm43xx_private *bcm) |
| { |
| if (!bcm->reg124_set_0x4) |
| return; |
| bcm43xx_write32(bcm, BCM43xx_MMIO_STATUS2_BITFIELD, |
| bcm43xx_read32(bcm, BCM43xx_MMIO_STATUS2_BITFIELD) |
| | 0x4); |
| //FIXME: reset reg124_set_0x4 to false? |
| } |
| |
| static void handle_irq_pmq(struct bcm43xx_private *bcm) |
| { |
| u32 tmp; |
| |
| //TODO: AP mode. |
| |
| while (1) { |
| tmp = bcm43xx_read32(bcm, BCM43xx_MMIO_PS_STATUS); |
| if (!(tmp & 0x00000008)) |
| break; |
| } |
| /* 16bit write is odd, but correct. */ |
| bcm43xx_write16(bcm, BCM43xx_MMIO_PS_STATUS, 0x0002); |
| } |
| |
| static void bcm43xx_generate_beacon_template(struct bcm43xx_private *bcm, |
| u16 ram_offset, u16 shm_size_offset) |
| { |
| u32 value; |
| u16 size = 0; |
| |
| /* Timestamp. */ |
| //FIXME: assumption: The chip sets the timestamp |
| value = 0; |
| bcm43xx_ram_write(bcm, ram_offset++, value); |
| bcm43xx_ram_write(bcm, ram_offset++, value); |
| size += 8; |
| |
| /* Beacon Interval / Capability Information */ |
| value = 0x0000;//FIXME: Which interval? |
| value |= (1 << 0) << 16; /* ESS */ |
| value |= (1 << 2) << 16; /* CF Pollable */ //FIXME? |
| value |= (1 << 3) << 16; /* CF Poll Request */ //FIXME? |
| if (!bcm->ieee->open_wep) |
| value |= (1 << 4) << 16; /* Privacy */ |
| bcm43xx_ram_write(bcm, ram_offset++, value); |
| size += 4; |
| |
| /* SSID */ |
| //TODO |
| |
| /* FH Parameter Set */ |
| //TODO |
| |
| /* DS Parameter Set */ |
| //TODO |
| |
| /* CF Parameter Set */ |
| //TODO |
| |
| /* TIM */ |
| //TODO |
| |
| bcm43xx_shm_write16(bcm, BCM43xx_SHM_SHARED, shm_size_offset, size); |
| } |
| |
| static void handle_irq_beacon(struct bcm43xx_private *bcm) |
| { |
| u32 status; |
| |
| bcm->irq_savedstate &= ~BCM43xx_IRQ_BEACON; |
| status = bcm43xx_read32(bcm, BCM43xx_MMIO_STATUS2_BITFIELD); |
| |
| if ((status & 0x1) && (status & 0x2)) { |
| /* ACK beacon IRQ. */ |
| bcm43xx_write32(bcm, BCM43xx_MMIO_GEN_IRQ_REASON, |
| BCM43xx_IRQ_BEACON); |
| bcm->irq_savedstate |= BCM43xx_IRQ_BEACON; |
| return; |
| } |
| if (!(status & 0x1)) { |
| bcm43xx_generate_beacon_template(bcm, 0x68, 0x18); |
| status |= 0x1; |
| bcm43xx_write32(bcm, BCM43xx_MMIO_STATUS2_BITFIELD, status); |
| } |
| if (!(status & 0x2)) { |
| bcm43xx_generate_beacon_template(bcm, 0x468, 0x1A); |
| status |= 0x2; |
| bcm43xx_write32(bcm, BCM43xx_MMIO_STATUS2_BITFIELD, status); |
| } |
| } |
| |
| /* Interrupt handler bottom-half */ |
| static void bcm43xx_interrupt_tasklet(struct bcm43xx_private *bcm) |
| { |
| u32 reason; |
| u32 dma_reason[6]; |
| u32 merged_dma_reason = 0; |
| int i, activity = 0; |
| unsigned long flags; |
| |
| #ifdef CONFIG_BCM43XX_DEBUG |
| u32 _handled = 0x00000000; |
| # define bcmirq_handled(irq) do { _handled |= (irq); } while (0) |
| #else |
| # define bcmirq_handled(irq) do { /* nothing */ } while (0) |
| #endif /* CONFIG_BCM43XX_DEBUG*/ |
| |
| spin_lock_irqsave(&bcm->irq_lock, flags); |
| reason = bcm->irq_reason; |
| for (i = 5; i >= 0; i--) { |
| dma_reason[i] = bcm->dma_reason[i]; |
| merged_dma_reason |= dma_reason[i]; |
| } |
| |
| if (unlikely(reason & BCM43xx_IRQ_XMIT_ERROR)) { |
| /* TX error. We get this when Template Ram is written in wrong endianess |
| * in dummy_tx(). We also get this if something is wrong with the TX header |
| * on DMA or PIO queues. |
| * Maybe we get this in other error conditions, too. |
| */ |
| printkl(KERN_ERR PFX "FATAL ERROR: BCM43xx_IRQ_XMIT_ERROR\n"); |
| bcmirq_handled(BCM43xx_IRQ_XMIT_ERROR); |
| } |
| if (unlikely(merged_dma_reason & BCM43xx_DMAIRQ_FATALMASK)) { |
| printkl(KERN_ERR PFX "FATAL ERROR: Fatal DMA error: " |
| "0x%08X, 0x%08X, 0x%08X, " |
| "0x%08X, 0x%08X, 0x%08X\n", |
| dma_reason[0], dma_reason[1], |
| dma_reason[2], dma_reason[3], |
| dma_reason[4], dma_reason[5]); |
| bcm43xx_controller_restart(bcm, "DMA error"); |
| mmiowb(); |
| spin_unlock_irqrestore(&bcm->irq_lock, flags); |
| return; |
| } |
| if (unlikely(merged_dma_reason & BCM43xx_DMAIRQ_NONFATALMASK)) { |
| printkl(KERN_ERR PFX "DMA error: " |
| "0x%08X, 0x%08X, 0x%08X, " |
| "0x%08X, 0x%08X, 0x%08X\n", |
| dma_reason[0], dma_reason[1], |
| dma_reason[2], dma_reason[3], |
| dma_reason[4], dma_reason[5]); |
| } |
| |
| if (reason & BCM43xx_IRQ_PS) { |
| handle_irq_ps(bcm); |
| bcmirq_handled(BCM43xx_IRQ_PS); |
| } |
| |
| if (reason & BCM43xx_IRQ_REG124) { |
| handle_irq_reg124(bcm); |
| bcmirq_handled(BCM43xx_IRQ_REG124); |
| } |
| |
| if (reason & BCM43xx_IRQ_BEACON) { |
| if (bcm->ieee->iw_mode == IW_MODE_MASTER) |
| handle_irq_beacon(bcm); |
| bcmirq_handled(BCM43xx_IRQ_BEACON); |
| } |
| |
| if (reason & BCM43xx_IRQ_PMQ) { |
| handle_irq_pmq(bcm); |
| bcmirq_handled(BCM43xx_IRQ_PMQ); |
| } |
| |
| if (reason & BCM43xx_IRQ_SCAN) { |
| /*TODO*/ |
| //bcmirq_handled(BCM43xx_IRQ_SCAN); |
| } |
| |
| if (reason & BCM43xx_IRQ_NOISE) { |
| handle_irq_noise(bcm); |
| bcmirq_handled(BCM43xx_IRQ_NOISE); |
| } |
| |
| /* Check the DMA reason registers for received data. */ |
| if (dma_reason[0] & BCM43xx_DMAIRQ_RX_DONE) { |
| if (bcm43xx_using_pio(bcm)) |
| bcm43xx_pio_rx(bcm43xx_current_pio(bcm)->queue0); |
| else |
| bcm43xx_dma_rx(bcm43xx_current_dma(bcm)->rx_ring0); |
| /* We intentionally don't set "activity" to 1, here. */ |
| } |
| assert(!(dma_reason[1] & BCM43xx_DMAIRQ_RX_DONE)); |
| assert(!(dma_reason[2] & BCM43xx_DMAIRQ_RX_DONE)); |
| if (dma_reason[3] & BCM43xx_DMAIRQ_RX_DONE) { |
| if (bcm43xx_using_pio(bcm)) |
| bcm43xx_pio_rx(bcm43xx_current_pio(bcm)->queue3); |
| else |
| bcm43xx_dma_rx(bcm43xx_current_dma(bcm)->rx_ring3); |
| activity = 1; |
| } |
| assert(!(dma_reason[4] & BCM43xx_DMAIRQ_RX_DONE)); |
| assert(!(dma_reason[5] & BCM43xx_DMAIRQ_RX_DONE)); |
| bcmirq_handled(BCM43xx_IRQ_RX); |
| |
| if (reason & BCM43xx_IRQ_XMIT_STATUS) { |
| handle_irq_transmit_status(bcm); |
| activity = 1; |
| //TODO: In AP mode, this also causes sending of powersave responses. |
| bcmirq_handled(BCM43xx_IRQ_XMIT_STATUS); |
| } |
| |
| /* IRQ_PIO_WORKAROUND is handled in the top-half. */ |
| bcmirq_handled(BCM43xx_IRQ_PIO_WORKAROUND); |
| #ifdef CONFIG_BCM43XX_DEBUG |
| if (unlikely(reason & ~_handled)) { |
| printkl(KERN_WARNING PFX |
| "Unhandled IRQ! Reason: 0x%08x, Unhandled: 0x%08x, " |
| "DMA: 0x%08x, 0x%08x, 0x%08x, 0x%08x\n", |
| reason, (reason & ~_handled), |
| dma_reason[0], dma_reason[1], |
| dma_reason[2], dma_reason[3]); |
| } |
| #endif |
| #undef bcmirq_handled |
| |
| if (!modparam_noleds) |
| bcm43xx_leds_update(bcm, activity); |
| bcm43xx_interrupt_enable(bcm, bcm->irq_savedstate); |
| mmiowb(); |
| spin_unlock_irqrestore(&bcm->irq_lock, flags); |
| } |
| |
| static void pio_irq_workaround(struct bcm43xx_private *bcm, |
| u16 base, int queueidx) |
| { |
| u16 rxctl; |
| |
| rxctl = bcm43xx_read16(bcm, base + BCM43xx_PIO_RXCTL); |
| if (rxctl & BCM43xx_PIO_RXCTL_DATAAVAILABLE) |
| bcm->dma_reason[queueidx] |= BCM43xx_DMAIRQ_RX_DONE; |
| else |
| bcm->dma_reason[queueidx] &= ~BCM43xx_DMAIRQ_RX_DONE; |
| } |
| |
| static void bcm43xx_interrupt_ack(struct bcm43xx_private *bcm, u32 reason) |
| { |
| if (bcm43xx_using_pio(bcm) && |
| (bcm->current_core->rev < 3) && |
| (!(reason & BCM43xx_IRQ_PIO_WORKAROUND))) { |
| /* Apply a PIO specific workaround to the dma_reasons */ |
| pio_irq_workaround(bcm, BCM43xx_MMIO_PIO1_BASE, 0); |
| pio_irq_workaround(bcm, BCM43xx_MMIO_PIO2_BASE, 1); |
| pio_irq_workaround(bcm, BCM43xx_MMIO_PIO3_BASE, 2); |
| pio_irq_workaround(bcm, BCM43xx_MMIO_PIO4_BASE, 3); |
| } |
| |
| bcm43xx_write32(bcm, BCM43xx_MMIO_GEN_IRQ_REASON, reason); |
| |
| bcm43xx_write32(bcm, BCM43xx_MMIO_DMA0_REASON, |
| bcm->dma_reason[0]); |
| bcm43xx_write32(bcm, BCM43xx_MMIO_DMA1_REASON, |
| bcm->dma_reason[1]); |
| bcm43xx_write32(bcm, BCM43xx_MMIO_DMA2_REASON, |
| bcm->dma_reason[2]); |
| bcm43xx_write32(bcm, BCM43xx_MMIO_DMA3_REASON, |
| bcm->dma_reason[3]); |
| bcm43xx_write32(bcm, BCM43xx_MMIO_DMA4_REASON, |
| bcm->dma_reason[4]); |
| bcm43xx_write32(bcm, BCM43xx_MMIO_DMA5_REASON, |
| bcm->dma_reason[5]); |
| } |
| |
| /* Interrupt handler top-half */ |
| static irqreturn_t bcm43xx_interrupt_handler(int irq, void *dev_id) |
| { |
| irqreturn_t ret = IRQ_HANDLED; |
| struct bcm43xx_private *bcm = dev_id; |
| u32 reason; |
| |
| if (!bcm) |
| return IRQ_NONE; |
| |
| spin_lock(&bcm->irq_lock); |
| |
| reason = bcm43xx_read32(bcm, BCM43xx_MMIO_GEN_IRQ_REASON); |
| if (reason == 0xffffffff) { |
| /* irq not for us (shared irq) */ |
| ret = IRQ_NONE; |
| goto out; |
| } |
| reason &= bcm43xx_read32(bcm, BCM43xx_MMIO_GEN_IRQ_MASK); |
| if (!reason) |
| goto out; |
| |
| assert(bcm43xx_status(bcm) == BCM43xx_STAT_INITIALIZED); |
| assert(bcm->current_core->id == BCM43xx_COREID_80211); |
| |
| bcm->dma_reason[0] = bcm43xx_read32(bcm, BCM43xx_MMIO_DMA0_REASON) |
| & 0x0001DC00; |
| bcm->dma_reason[1] = bcm43xx_read32(bcm, BCM43xx_MMIO_DMA1_REASON) |
| & 0x0000DC00; |
| bcm->dma_reason[2] = bcm43xx_read32(bcm, BCM43xx_MMIO_DMA2_REASON) |
| & 0x0000DC00; |
| bcm->dma_reason[3] = bcm43xx_read32(bcm, BCM43xx_MMIO_DMA3_REASON) |
| & 0x0001DC00; |
| bcm->dma_reason[4] = bcm43xx_read32(bcm, BCM43xx_MMIO_DMA4_REASON) |
| & 0x0000DC00; |
| bcm->dma_reason[5] = bcm43xx_read32(bcm, BCM43xx_MMIO_DMA5_REASON) |
| & 0x0000DC00; |
| |
| bcm43xx_interrupt_ack(bcm, reason); |
| |
| /* disable all IRQs. They are enabled again in the bottom half. */ |
| bcm->irq_savedstate = bcm43xx_interrupt_disable(bcm, BCM43xx_IRQ_ALL); |
| /* save the reason code and call our bottom half. */ |
| bcm->irq_reason = reason; |
| tasklet_schedule(&bcm->isr_tasklet); |
| |
| out: |
| mmiowb(); |
| spin_unlock(&bcm->irq_lock); |
| |
| return ret; |
| } |
| |
| static void bcm43xx_release_firmware(struct bcm43xx_private *bcm, int force) |
| { |
| struct bcm43xx_phyinfo *phy = bcm43xx_current_phy(bcm); |
| |
| if (bcm->firmware_norelease && !force) |
| return; /* Suspending or controller reset. */ |
| release_firmware(phy->ucode); |
| phy->ucode = NULL; |
| release_firmware(phy->pcm); |
| phy->pcm = NULL; |
| release_firmware(phy->initvals0); |
| phy->initvals0 = NULL; |
| release_firmware(phy->initvals1); |
| phy->initvals1 = NULL; |
| } |
| |
| static int bcm43xx_request_firmware(struct bcm43xx_private *bcm) |
| { |
| struct bcm43xx_phyinfo *phy = bcm43xx_current_phy(bcm); |
| u8 rev = bcm->current_core->rev; |
| int err = 0; |
| int nr; |
| char buf[22 + sizeof(modparam_fwpostfix) - 1] = { 0 }; |
| |
| if (!phy->ucode) { |
| snprintf(buf, ARRAY_SIZE(buf), "bcm43xx_microcode%d%s.fw", |
| (rev >= 5 ? 5 : rev), |
| modparam_fwpostfix); |
| err = request_firmware(&phy->ucode, buf, &bcm->pci_dev->dev); |
| if (err) { |
| printk(KERN_ERR PFX |
| "Error: Microcode \"%s\" not available or load failed.\n", |
| buf); |
| goto error; |
| } |
| } |
| |
| if (!phy->pcm) { |
| snprintf(buf, ARRAY_SIZE(buf), |
| "bcm43xx_pcm%d%s.fw", |
| (rev < 5 ? 4 : 5), |
| modparam_fwpostfix); |
| err = request_firmware(&phy->pcm, buf, &bcm->pci_dev->dev); |
| if (err) { |
| printk(KERN_ERR PFX |
| "Error: PCM \"%s\" not available or load failed.\n", |
| buf); |
| goto error; |
| } |
| } |
| |
| if (!phy->initvals0) { |
| if (rev == 2 || rev == 4) { |
| switch (phy->type) { |
| case BCM43xx_PHYTYPE_A: |
| nr = 3; |
| break; |
| case BCM43xx_PHYTYPE_B: |
| case BCM43xx_PHYTYPE_G: |
| nr = 1; |
| break; |
| default: |
| goto err_noinitval; |
| } |
| |
| } else if (rev >= 5) { |
| switch (phy->type) { |
| case BCM43xx_PHYTYPE_A: |
| nr = 7; |
| break; |
| case BCM43xx_PHYTYPE_B: |
| case BCM43xx_PHYTYPE_G: |
| nr = 5; |
| break; |
| default: |
| goto err_noinitval; |
| } |
| } else |
| goto err_noinitval; |
| snprintf(buf, ARRAY_SIZE(buf), "bcm43xx_initval%02d%s.fw", |
| nr, modparam_fwpostfix); |
| |
| err = request_firmware(&phy->initvals0, buf, &bcm->pci_dev->dev); |
| if (err) { |
| printk(KERN_ERR PFX |
| "Error: InitVals \"%s\" not available or load failed.\n", |
| buf); |
| goto error; |
| } |
| if (phy->initvals0->size % sizeof(struct bcm43xx_initval)) { |
| printk(KERN_ERR PFX "InitVals fileformat error.\n"); |
| goto error; |
| } |
| } |
| |
| if (!phy->initvals1) { |
| if (rev >= 5) { |
| u32 sbtmstatehigh; |
| |
| switch (phy->type) { |
| case BCM43xx_PHYTYPE_A: |
| sbtmstatehigh = bcm43xx_read32(bcm, BCM43xx_CIR_SBTMSTATEHIGH); |
| if (sbtmstatehigh & 0x00010000) |
| nr = 9; |
| else |
| nr = 10; |
| break; |
| case BCM43xx_PHYTYPE_B: |
| case BCM43xx_PHYTYPE_G: |
| nr = 6; |
| break; |
| default: |
| goto err_noinitval; |
| } |
| snprintf(buf, ARRAY_SIZE(buf), "bcm43xx_initval%02d%s.fw", |
| nr, modparam_fwpostfix); |
| |
| err = request_firmware(&phy->initvals1, buf, &bcm->pci_dev->dev); |
| if (err) { |
| printk(KERN_ERR PFX |
| "Error: InitVals \"%s\" not available or load failed.\n", |
| buf); |
| goto error; |
| } |
| if (phy->initvals1->size % sizeof(struct bcm43xx_initval)) { |
| printk(KERN_ERR PFX "InitVals fileformat error.\n"); |
| goto error; |
| } |
| } |
| } |
| |
| out: |
| return err; |
| error: |
| bcm43xx_release_firmware(bcm, 1); |
| goto out; |
| err_noinitval: |
| printk(KERN_ERR PFX "Error: No InitVals available!\n"); |
| err = -ENOENT; |
| goto error; |
| } |
| |
| static void bcm43xx_upload_microcode(struct bcm43xx_private *bcm) |
| { |
| struct bcm43xx_phyinfo *phy = bcm43xx_current_phy(bcm); |
| const u32 *data; |
| unsigned int i, len; |
| |
| /* Upload Microcode. */ |
| data = (u32 *)(phy->ucode->data); |
| len = phy->ucode->size / sizeof(u32); |
| bcm43xx_shm_control_word(bcm, BCM43xx_SHM_UCODE, 0x0000); |
| for (i = 0; i < len; i++) { |
| bcm43xx_write32(bcm, BCM43xx_MMIO_SHM_DATA, |
| be32_to_cpu(data[i])); |
| udelay(10); |
| } |
| |
| /* Upload PCM data. */ |
| data = (u32 *)(phy->pcm->data); |
| len = phy->pcm->size / sizeof(u32); |
| bcm43xx_shm_control_word(bcm, BCM43xx_SHM_PCM, 0x01ea); |
| bcm43xx_write32(bcm, BCM43xx_MMIO_SHM_DATA, 0x00004000); |
| bcm43xx_shm_control_word(bcm, BCM43xx_SHM_PCM, 0x01eb); |
| for (i = 0; i < len; i++) { |
| bcm43xx_write32(bcm, BCM43xx_MMIO_SHM_DATA, |
| be32_to_cpu(data[i])); |
| udelay(10); |
| } |
| } |
| |
| static int bcm43xx_write_initvals(struct bcm43xx_private *bcm, |
| const struct bcm43xx_initval *data, |
| const unsigned int len) |
| { |
| u16 offset, size; |
| u32 value; |
| unsigned int i; |
| |
| for (i = 0; i < len; i++) { |
| offset = be16_to_cpu(data[i].offset); |
| size = be16_to_cpu(data[i].size); |
| value = be32_to_cpu(data[i].value); |
| |
| if (unlikely(offset >= 0x1000)) |
| goto err_format; |
| if (size == 2) { |
| if (unlikely(value & 0xFFFF0000)) |
| goto err_format; |
| bcm43xx_write16(bcm, offset, (u16)value); |
| } else if (size == 4) { |
| bcm43xx_write32(bcm, offset, value); |
| } else |
| goto err_format; |
| } |
| |
| return 0; |
| |
| err_format: |
| printk(KERN_ERR PFX "InitVals (bcm43xx_initvalXX.fw) file-format error. " |
| "Please fix your bcm43xx firmware files.\n"); |
| return -EPROTO; |
| } |
| |
| static int bcm43xx_upload_initvals(struct bcm43xx_private *bcm) |
| { |
| struct bcm43xx_phyinfo *phy = bcm43xx_current_phy(bcm); |
| int err; |
| |
| err = bcm43xx_write_initvals(bcm, (struct bcm43xx_initval *)phy->initvals0->data, |
| phy->initvals0->size / sizeof(struct bcm43xx_initval)); |
| if (err) |
| goto out; |
| if (phy->initvals1) { |
| err = bcm43xx_write_initvals(bcm, (struct bcm43xx_initval *)phy->initvals1->data, |
| phy->initvals1->size / sizeof(struct bcm43xx_initval)); |
| if (err) |
| goto out; |
| } |
| out: |
| return err; |
| } |
| |
| static int bcm43xx_initialize_irq(struct bcm43xx_private *bcm) |
| { |
| int err; |
| |
| bcm->irq = bcm->pci_dev->irq; |
| err = request_irq(bcm->irq, bcm43xx_interrupt_handler, |
| IRQF_SHARED, KBUILD_MODNAME, bcm); |
| if (err) |
| printk(KERN_ERR PFX "Cannot register IRQ%d\n", bcm->irq); |
| |
| return err; |
| } |
| |
| /* Switch to the core used to write the GPIO register. |
| * This is either the ChipCommon, or the PCI core. |
| */ |
| static int switch_to_gpio_core(struct bcm43xx_private *bcm) |
| { |
| int err; |
| |
| /* Where to find the GPIO register depends on the chipset. |
| * If it has a ChipCommon, its register at offset 0x6c is the GPIO |
| * control register. Otherwise the register at offset 0x6c in the |
| * PCI core is the GPIO control register. |
| */ |
| err = bcm43xx_switch_core(bcm, &bcm->core_chipcommon); |
| if (err == -ENODEV) { |
| err = bcm43xx_switch_core(bcm, &bcm->core_pci); |
| if (unlikely(err == -ENODEV)) { |
| printk(KERN_ERR PFX "gpio error: " |
| "Neither ChipCommon nor PCI core available!\n"); |
| } |
| } |
| |
| return err; |
| } |
| |
| /* Initialize the GPIOs |
| * http://bcm-specs.sipsolutions.net/GPIO |
| */ |
| static int bcm43xx_gpio_init(struct bcm43xx_private *bcm) |
| { |
| struct bcm43xx_coreinfo *old_core; |
| int err; |
| u32 mask, set; |
| |
| bcm43xx_write32(bcm, BCM43xx_MMIO_STATUS_BITFIELD, |
| bcm43xx_read32(bcm, BCM43xx_MMIO_STATUS_BITFIELD) |
| & 0xFFFF3FFF); |
| |
| bcm43xx_leds_switch_all(bcm, 0); |
| bcm43xx_write16(bcm, BCM43xx_MMIO_GPIO_MASK, |
| bcm43xx_read16(bcm, BCM43xx_MMIO_GPIO_MASK) | 0x000F); |
| |
| mask = 0x0000001F; |
| set = 0x0000000F; |
| if (bcm->chip_id == 0x4301) { |
| mask |= 0x0060; |
| set |= 0x0060; |
| } |
| if (0 /* FIXME: conditional unknown */) { |
| bcm43xx_write16(bcm, BCM43xx_MMIO_GPIO_MASK, |
| bcm43xx_read16(bcm, BCM43xx_MMIO_GPIO_MASK) |
| | 0x0100); |
| mask |= 0x0180; |
| set |= 0x0180; |
| } |
| if (bcm->sprom.boardflags & BCM43xx_BFL_PACTRL) { |
| bcm43xx_write16(bcm, BCM43xx_MMIO_GPIO_MASK, |
| bcm43xx_read16(bcm, BCM43xx_MMIO_GPIO_MASK) |
| | 0x0200); |
| mask |= 0x0200; |
| set |= 0x0200; |
| } |
| if (bcm->current_core->rev >= 2) |
| mask |= 0x0010; /* FIXME: This is redundant. */ |
| |
| old_core = bcm->current_core; |
| err = switch_to_gpio_core(bcm); |
| if (err) |
| goto out; |
| bcm43xx_write32(bcm, BCM43xx_GPIO_CONTROL, |
| (bcm43xx_read32(bcm, BCM43xx_GPIO_CONTROL) & mask) | set); |
| err = bcm43xx_switch_core(bcm, old_core); |
| out: |
| return err; |
| } |
| |
| /* Turn off all GPIO stuff. Call this on module unload, for example. */ |
| static int bcm43xx_gpio_cleanup(struct bcm43xx_private *bcm) |
| { |
| struct bcm43xx_coreinfo *old_core; |
| int err; |
| |
| old_core = bcm->current_core; |
| err = switch_to_gpio_core(bcm); |
| if (err) |
| return err; |
| bcm43xx_write32(bcm, BCM43xx_GPIO_CONTROL, 0x00000000); |
| err = bcm43xx_switch_core(bcm, old_core); |
| assert(err == 0); |
| |
| return 0; |
| } |
| |
| /* http://bcm-specs.sipsolutions.net/EnableMac */ |
| void bcm43xx_mac_enable(struct bcm43xx_private *bcm) |
| { |
| bcm->mac_suspended--; |
| assert(bcm->mac_suspended >= 0); |
| if (bcm->mac_suspended == 0) { |
| bcm43xx_write32(bcm, BCM43xx_MMIO_STATUS_BITFIELD, |
| bcm43xx_read32(bcm, BCM43xx_MMIO_STATUS_BITFIELD) |
| | BCM43xx_SBF_MAC_ENABLED); |
| bcm43xx_write32(bcm, BCM43xx_MMIO_GEN_IRQ_REASON, BCM43xx_IRQ_READY); |
| bcm43xx_read32(bcm, BCM43xx_MMIO_STATUS_BITFIELD); /* dummy read */ |
| bcm43xx_read32(bcm, BCM43xx_MMIO_GEN_IRQ_REASON); /* dummy read */ |
| bcm43xx_power_saving_ctl_bits(bcm, -1, -1); |
| } |
| } |
| |
| /* http://bcm-specs.sipsolutions.net/SuspendMAC */ |
| void bcm43xx_mac_suspend(struct bcm43xx_private *bcm) |
| { |
| int i; |
| u32 tmp; |
| |
| assert(bcm->mac_suspended >= 0); |
| if (bcm->mac_suspended == 0) { |
| bcm43xx_power_saving_ctl_bits(bcm, -1, 1); |
| bcm43xx_write32(bcm, BCM43xx_MMIO_STATUS_BITFIELD, |
| bcm43xx_read32(bcm, BCM43xx_MMIO_STATUS_BITFIELD) |
| & ~BCM43xx_SBF_MAC_ENABLED); |
| bcm43xx_read32(bcm, BCM43xx_MMIO_GEN_IRQ_REASON); /* dummy read */ |
| for (i = 10000; i; i--) { |
| tmp = bcm43xx_read32(bcm, BCM43xx_MMIO_GEN_IRQ_REASON); |
| if (tmp & BCM43xx_IRQ_READY) |
| goto out; |
| udelay(1); |
| } |
| printkl(KERN_ERR PFX "MAC suspend failed\n"); |
| } |
| out: |
| bcm->mac_suspended++; |
| } |
| |
| void bcm43xx_set_iwmode(struct bcm43xx_private *bcm, |
| int iw_mode) |
| { |
| unsigned long flags; |
| struct net_device *net_dev = bcm->net_dev; |
| u32 status; |
| u16 value; |
| |
| spin_lock_irqsave(&bcm->ieee->lock, flags); |
| bcm->ieee->iw_mode = iw_mode; |
| spin_unlock_irqrestore(&bcm->ieee->lock, flags); |
| if (iw_mode == IW_MODE_MONITOR) |
| net_dev->type = ARPHRD_IEEE80211; |
| else |
| net_dev->type = ARPHRD_ETHER; |
| |
| status = bcm43xx_read32(bcm, BCM43xx_MMIO_STATUS_BITFIELD); |
| /* Reset status to infrastructured mode */ |
| status &= ~(BCM43xx_SBF_MODE_AP | BCM43xx_SBF_MODE_MONITOR); |
| status &= ~BCM43xx_SBF_MODE_PROMISC; |
| status |= BCM43xx_SBF_MODE_NOTADHOC; |
| |
| /* FIXME: Always enable promisc mode, until we get the MAC filters working correctly. */ |
| status |= BCM43xx_SBF_MODE_PROMISC; |
| |
| switch (iw_mode) { |
| case IW_MODE_MONITOR: |
| status |= BCM43xx_SBF_MODE_MONITOR; |
| status |= BCM43xx_SBF_MODE_PROMISC; |
| break; |
| case IW_MODE_ADHOC: |
| status &= ~BCM43xx_SBF_MODE_NOTADHOC; |
| break; |
| case IW_MODE_MASTER: |
| status |= BCM43xx_SBF_MODE_AP; |
| break; |
| case IW_MODE_SECOND: |
| case IW_MODE_REPEAT: |
| TODO(); /* TODO */ |
| break; |
| case IW_MODE_INFRA: |
| /* nothing to be done here... */ |
| break; |
| default: |
| dprintk(KERN_ERR PFX "Unknown mode in set_iwmode: %d\n", iw_mode); |
| } |
| if (net_dev->flags & IFF_PROMISC) |
| status |= BCM43xx_SBF_MODE_PROMISC; |
| bcm43xx_write32(bcm, BCM43xx_MMIO_STATUS_BITFIELD, status); |
| |
| value = 0x0002; |
| if (iw_mode != IW_MODE_ADHOC && iw_mode != IW_MODE_MASTER) { |
| if (bcm->chip_id == 0x4306 && bcm->chip_rev == 3) |
| value = 0x0064; |
| else |
| value = 0x0032; |
| } |
| bcm43xx_write16(bcm, 0x0612, value); |
| } |
| |
| /* This is the opposite of bcm43xx_chip_init() */ |
| static void bcm43xx_chip_cleanup(struct bcm43xx_private *bcm) |
| { |
| bcm43xx_radio_turn_off(bcm); |
| if (!modparam_noleds) |
| bcm43xx_leds_exit(bcm); |
| bcm43xx_gpio_cleanup(bcm); |
| bcm43xx_release_firmware(bcm, 0); |
| } |
| |
| /* Initialize the chip |
| * http://bcm-specs.sipsolutions.net/ChipInit |
| */ |
| static int bcm43xx_chip_init(struct bcm43xx_private *bcm) |
| { |
| struct bcm43xx_radioinfo *radio = bcm43xx_current_radio(bcm); |
| struct bcm43xx_phyinfo *phy = bcm43xx_current_phy(bcm); |
| int err; |
| int i, tmp; |
| u32 value32; |
| u16 value16; |
| |
| bcm43xx_write32(bcm, BCM43xx_MMIO_STATUS_BITFIELD, |
| BCM43xx_SBF_CORE_READY |
| | BCM43xx_SBF_400); |
| |
| err = bcm43xx_request_firmware(bcm); |
| if (err) |
| goto out; |
| bcm43xx_upload_microcode(bcm); |
| |
| bcm43xx_write32(bcm, BCM43xx_MMIO_GEN_IRQ_REASON, 0xFFFFFFFF); |
| bcm43xx_write32(bcm, BCM43xx_MMIO_STATUS_BITFIELD, 0x00020402); |
| i = 0; |
| while (1) { |
| value32 = bcm43xx_read32(bcm, BCM43xx_MMIO_GEN_IRQ_REASON); |
| if (value32 == BCM43xx_IRQ_READY) |
| break; |
| i++; |
| if (i >= BCM43xx_IRQWAIT_MAX_RETRIES) { |
| printk(KERN_ERR PFX "IRQ_READY timeout\n"); |
| err = -ENODEV; |
| goto err_release_fw; |
| } |
| udelay(10); |
| } |
| bcm43xx_read32(bcm, BCM43xx_MMIO_GEN_IRQ_REASON); /* dummy read */ |
| |
| value16 = bcm43xx_shm_read16(bcm, BCM43xx_SHM_SHARED, |
| BCM43xx_UCODE_REVISION); |
| |
| dprintk(KERN_INFO PFX "Microcode rev 0x%x, pl 0x%x " |
| "(20%.2i-%.2i-%.2i %.2i:%.2i:%.2i)\n", value16, |
| bcm43xx_shm_read16(bcm, BCM43xx_SHM_SHARED, |
| BCM43xx_UCODE_PATCHLEVEL), |
| (bcm43xx_shm_read16(bcm, BCM43xx_SHM_SHARED, |
| BCM43xx_UCODE_DATE) >> 12) & 0xf, |
| (bcm43xx_shm_read16(bcm, BCM43xx_SHM_SHARED, |
| BCM43xx_UCODE_DATE) >> 8) & 0xf, |
| bcm43xx_shm_read16(bcm, BCM43xx_SHM_SHARED, |
| BCM43xx_UCODE_DATE) & 0xff, |
| (bcm43xx_shm_read16(bcm, BCM43xx_SHM_SHARED, |
| BCM43xx_UCODE_TIME) >> 11) & 0x1f, |
| (bcm43xx_shm_read16(bcm, BCM43xx_SHM_SHARED, |
| BCM43xx_UCODE_TIME) >> 5) & 0x3f, |
| bcm43xx_shm_read16(bcm, BCM43xx_SHM_SHARED, |
| BCM43xx_UCODE_TIME) & 0x1f); |
| |
| if ( value16 > 0x128 ) { |
| printk(KERN_ERR PFX |
| "Firmware: no support for microcode extracted " |
| "from version 4.x binary drivers.\n"); |
| err = -EOPNOTSUPP; |
| goto err_release_fw; |
| } |
| |
| err = bcm43xx_gpio_init(bcm); |
| if (err) |
| goto err_release_fw; |
| |
| err = bcm43xx_upload_initvals(bcm); |
| if (err) |
| goto err_gpio_cleanup; |
| bcm43xx_radio_turn_on(bcm); |
| bcm->radio_hw_enable = bcm43xx_is_hw_radio_enabled(bcm); |
| printk(KERN_INFO PFX "Radio %s by hardware\n", |
| (bcm->radio_hw_enable == 0) ? "disabled" : "enabled"); |
| |
| bcm43xx_write16(bcm, 0x03E6, 0x0000); |
| err = bcm43xx_phy_init(bcm); |
| if (err) |
| goto err_radio_off; |
| |
| /* Select initial Interference Mitigation. */ |
| tmp = radio->interfmode; |
| radio->interfmode = BCM43xx_RADIO_INTERFMODE_NONE; |
| bcm43xx_radio_set_interference_mitigation(bcm, tmp); |
| |
| bcm43xx_phy_set_antenna_diversity(bcm); |
| bcm43xx_radio_set_txantenna(bcm, BCM43xx_RADIO_TXANTENNA_DEFAULT); |
| if (phy->type == BCM43xx_PHYTYPE_B) { |
| value16 = bcm43xx_read16(bcm, 0x005E); |
| value16 |= 0x0004; |
| bcm43xx_write16(bcm, 0x005E, value16); |
| } |
| bcm43xx_write32(bcm, 0x0100, 0x01000000); |
| if (bcm->current_core->rev < 5) |
| bcm43xx_write32(bcm, 0x010C, 0x01000000); |
| |
| value32 = bcm43xx_read32(bcm, BCM43xx_MMIO_STATUS_BITFIELD); |
| value32 &= ~ BCM43xx_SBF_MODE_NOTADHOC; |
| bcm43xx_write32(bcm, BCM43xx_MMIO_STATUS_BITFIELD, value32); |
| value32 = bcm43xx_read32(bcm, BCM43xx_MMIO_STATUS_BITFIELD); |
| value32 |= BCM43xx_SBF_MODE_NOTADHOC; |
| bcm43xx_write32(bcm, BCM43xx_MMIO_STATUS_BITFIELD, value32); |
| |
| value32 = bcm43xx_read32(bcm, BCM43xx_MMIO_STATUS_BITFIELD); |
| value32 |= 0x100000; |
| bcm43xx_write32(bcm, BCM43xx_MMIO_STATUS_BITFIELD, value32); |
| |
| if (bcm43xx_using_pio(bcm)) { |
| bcm43xx_write32(bcm, 0x0210, 0x00000100); |
| bcm43xx_write32(bcm, 0x0230, 0x00000100); |
| bcm43xx_write32(bcm, 0x0250, 0x00000100); |
| bcm43xx_write32(bcm, 0x0270, 0x00000100); |
| bcm43xx_shm_write16(bcm, BCM43xx_SHM_SHARED, 0x0034, 0x0000); |
| } |
| |
| /* Probe Response Timeout value */ |
| /* FIXME: Default to 0, has to be set by ioctl probably... :-/ */ |
| bcm43xx_shm_write16(bcm, BCM43xx_SHM_SHARED, 0x0074, 0x0000); |
| |
| /* Initially set the wireless operation mode. */ |
| bcm43xx_set_iwmode(bcm, bcm->ieee->iw_mode); |
| |
| if (bcm->current_core->rev < 3) { |
| bcm43xx_write16(bcm, 0x060E, 0x0000); |
| bcm43xx_write16(bcm, 0x0610, 0x8000); |
| bcm43xx_write16(bcm, 0x0604, 0x0000); |
| bcm43xx_write16(bcm, 0x0606, 0x0200); |
| } else { |
| bcm43xx_write32(bcm, 0x0188, 0x80000000); |
| bcm43xx_write32(bcm, 0x018C, 0x02000000); |
| } |
| bcm43xx_write32(bcm, BCM43xx_MMIO_GEN_IRQ_REASON, 0x00004000); |
| bcm43xx_write32(bcm, BCM43xx_MMIO_DMA0_IRQ_MASK, 0x0001DC00); |
| bcm43xx_write32(bcm, BCM43xx_MMIO_DMA1_IRQ_MASK, 0x0000DC00); |
| bcm43xx_write32(bcm, BCM43xx_MMIO_DMA2_IRQ_MASK, 0x0000DC00); |
| bcm43xx_write32(bcm, BCM43xx_MMIO_DMA3_IRQ_MASK, 0x0001DC00); |
| bcm43xx_write32(bcm, BCM43xx_MMIO_DMA4_IRQ_MASK, 0x0000DC00); |
| bcm43xx_write32(bcm, BCM43xx_MMIO_DMA5_IRQ_MASK, 0x0000DC00); |
| |
| value32 = bcm43xx_read32(bcm, BCM43xx_CIR_SBTMSTATELOW); |
| value32 |= 0x00100000; |
| bcm43xx_write32(bcm, BCM43xx_CIR_SBTMSTATELOW, value32); |
| |
| bcm43xx_write16(bcm, BCM43xx_MMIO_POWERUP_DELAY, bcm43xx_pctl_powerup_delay(bcm)); |
| |
| assert(err == 0); |
| dprintk(KERN_INFO PFX "Chip initialized\n"); |
| out: |
| return err; |
| |
| err_radio_off: |
| bcm43xx_radio_turn_off(bcm); |
| err_gpio_cleanup: |
| bcm43xx_gpio_cleanup(bcm); |
| err_release_fw: |
| bcm43xx_release_firmware(bcm, 1); |
| goto out; |
| } |
| |
| /* Validate chip access |
| * http://bcm-specs.sipsolutions.net/ValidateChipAccess */ |
| static int bcm43xx_validate_chip(struct bcm43xx_private *bcm) |
| { |
| u32 value; |
| u32 shm_backup; |
| |
| shm_backup = bcm43xx_shm_read32(bcm, BCM43xx_SHM_SHARED, 0x0000); |
| bcm43xx_shm_write32(bcm, BCM43xx_SHM_SHARED, 0x0000, 0xAA5555AA); |
| if (bcm43xx_shm_read32(bcm, BCM43xx_SHM_SHARED, 0x0000) != 0xAA5555AA) |
| goto error; |
| bcm43xx_shm_write32(bcm, BCM43xx_SHM_SHARED, 0x0000, 0x55AAAA55); |
| if (bcm43xx_shm_read32(bcm, BCM43xx_SHM_SHARED, 0x0000) != 0x55AAAA55) |
| goto error; |
| bcm43xx_shm_write32(bcm, BCM43xx_SHM_SHARED, 0x0000, shm_backup); |
| |
| value = bcm43xx_read32(bcm, BCM43xx_MMIO_STATUS_BITFIELD); |
| if ((value | 0x80000000) != 0x80000400) |
| goto error; |
| |
| value = bcm43xx_read32(bcm, BCM43xx_MMIO_GEN_IRQ_REASON); |
| if (value != 0x00000000) |
| goto error; |
| |
| return 0; |
| error: |
| printk(KERN_ERR PFX "Failed to validate the chipaccess\n"); |
| return -ENODEV; |
| } |
| |
| static void bcm43xx_init_struct_phyinfo(struct bcm43xx_phyinfo *phy) |
| { |
| /* Initialize a "phyinfo" structure. The structure is already |
| * zeroed out. |
| * This is called on insmod time to initialize members. |
| */ |
| phy->savedpctlreg = 0xFFFF; |
| spin_lock_init(&phy->lock); |
| } |
| |
| static void bcm43xx_init_struct_radioinfo(struct bcm43xx_radioinfo *radio) |
| { |
| /* Initialize a "radioinfo" structure. The structure is already |
| * zeroed out. |
| * This is called on insmod time to initialize members. |
| */ |
| radio->interfmode = BCM43xx_RADIO_INTERFMODE_NONE; |
| radio->channel = 0xFF; |
| radio->initial_channel = 0xFF; |
| } |
| |
| static int bcm43xx_probe_cores(struct bcm43xx_private *bcm) |
| { |
| int err, i; |
| int current_core; |
| u32 core_vendor, core_id, core_rev; |
| u32 sb_id_hi, chip_id_32 = 0; |
| u16 pci_device, chip_id_16; |
| u8 core_count; |
| |
| memset(&bcm->core_chipcommon, 0, sizeof(struct bcm43xx_coreinfo)); |
| memset(&bcm->core_pci, 0, sizeof(struct bcm43xx_coreinfo)); |
| memset(&bcm->core_80211, 0, sizeof(struct bcm43xx_coreinfo) |
| * BCM43xx_MAX_80211_CORES); |
| memset(&bcm->core_80211_ext, 0, sizeof(struct bcm43xx_coreinfo_80211) |
| * BCM43xx_MAX_80211_CORES); |
| bcm->nr_80211_available = 0; |
| bcm->current_core = NULL; |
| bcm->active_80211_core = NULL; |
| |
| /* map core 0 */ |
| err = _switch_core(bcm, 0); |
| if (err) |
| goto out; |
| |
| /* fetch sb_id_hi from core information registers */ |
| sb_id_hi = bcm43xx_read32(bcm, BCM43xx_CIR_SB_ID_HI); |
| |
| core_id = (sb_id_hi & 0x8FF0) >> 4; |
| core_rev = (sb_id_hi & 0x7000) >> 8; |
| core_rev |= (sb_id_hi & 0xF); |
| core_vendor = (sb_id_hi & 0xFFFF0000) >> 16; |
| |
| /* if present, chipcommon is always core 0; read the chipid from it */ |
| if (core_id == BCM43xx_COREID_CHIPCOMMON) { |
| chip_id_32 = bcm43xx_read32(bcm, 0); |
| chip_id_16 = chip_id_32 & 0xFFFF; |
| bcm->core_chipcommon.available = 1; |
| bcm->core_chipcommon.id = core_id; |
| bcm->core_chipcommon.rev = core_rev; |
| bcm->core_chipcommon.index = 0; |
| /* While we are at it, also read the capabilities. */ |
| bcm->chipcommon_capabilities = bcm43xx_read32(bcm, BCM43xx_CHIPCOMMON_CAPABILITIES); |
| } else { |
| /* without a chipCommon, use a hard coded table. */ |
| pci_device = bcm->pci_dev->device; |
| if (pci_device == 0x4301) |
| chip_id_16 = 0x4301; |
| else if ((pci_device >= 0x4305) && (pci_device <= 0x4307)) |
| chip_id_16 = 0x4307; |
| else if ((pci_device >= 0x4402) && (pci_device <= 0x4403)) |
| chip_id_16 = 0x4402; |
| else if ((pci_device >= 0x4610) && (pci_device <= 0x4615)) |
| chip_id_16 = 0x4610; |
| else if ((pci_device >= 0x4710) && (pci_device <= 0x4715)) |
| chip_id_16 = 0x4710; |
| else { |
| printk(KERN_ERR PFX "Could not determine Chip ID\n"); |
| return -ENODEV; |
| } |
| } |
| |
| /* ChipCommon with Core Rev >=4 encodes number of cores, |
| * otherwise consult hardcoded table */ |
| if ((core_id == BCM43xx_COREID_CHIPCOMMON) && (core_rev >= 4)) { |
| core_count = (chip_id_32 & 0x0F000000) >> 24; |
| } else { |
| switch (chip_id_16) { |
| case 0x4610: |
| case 0x4704: |
| case 0x4710: |
| core_count = 9; |
| break; |
| case 0x4310: |
| core_count = 8; |
| break; |
| case 0x5365: |
| core_count = 7; |
| break; |
| case 0x4306: |
| core_count = 6; |
| break; |
| case 0x4301: |
| case 0x4307: |
| core_count = 5; |
| break; |
| case 0x4402: |
| core_count = 3; |
| break; |
| default: |
| /* SOL if we get here */ |
| assert(0); |
| core_count = 1; |
| } |
| } |
| |
| bcm->chip_id = chip_id_16; |
| bcm->chip_rev = (chip_id_32 & 0x000F0000) >> 16; |
| bcm->chip_package = (chip_id_32 & 0x00F00000) >> 20; |
| |
| dprintk(KERN_INFO PFX "Chip ID 0x%x, rev 0x%x\n", |
| bcm->chip_id, bcm->chip_rev); |
| dprintk(KERN_INFO PFX "Number of cores: %d\n", core_count); |
| if (bcm->core_chipcommon.available) { |
| dprintk(KERN_INFO PFX "Core 0: ID 0x%x, rev 0x%x, vendor 0x%x\n", |
| core_id, core_rev, core_vendor); |
| current_core = 1; |
| } else |
| current_core = 0; |
| for ( ; current_core < core_count; current_core++) { |
| struct bcm43xx_coreinfo *core; |
| struct bcm43xx_coreinfo_80211 *ext_80211; |
| |
| err = _switch_core(bcm, current_core); |
| if (err) |
| goto out; |
| /* Gather information */ |
| /* fetch sb_id_hi from core information registers */ |
| sb_id_hi = bcm43xx_read32(bcm, BCM43xx_CIR_SB_ID_HI); |
| |
| /* extract core_id, core_rev, core_vendor */ |
| core_id = (sb_id_hi & 0x8FF0) >> 4; |
| core_rev = ((sb_id_hi & 0xF) | ((sb_id_hi & 0x7000) >> 8)); |
| core_vendor = (sb_id_hi & 0xFFFF0000) >> 16; |
| |
| dprintk(KERN_INFO PFX "Core %d: ID 0x%x, rev 0x%x, vendor 0x%x\n", |
| current_core, core_id, core_rev, core_vendor); |
| |
| core = NULL; |
| switch (core_id) { |
| case BCM43xx_COREID_PCI: |
| case BCM43xx_COREID_PCIE: |
| core = &bcm->core_pci; |
| if (core->available) { |
| printk(KERN_WARNING PFX "Multiple PCI cores found.\n"); |
| continue; |
| } |
| break; |
| case BCM43xx_COREID_80211: |
| for (i = 0; i < BCM43xx_MAX_80211_CORES; i++) { |
| core = &(bcm->core_80211[i]); |
| ext_80211 = &(bcm->core_80211_ext[i]); |
| if (!core->available) |
| break; |
| core = NULL; |
| } |
| if (!core) { |
| printk(KERN_WARNING PFX "More than %d cores of type 802.11 found.\n", |
| BCM43xx_MAX_80211_CORES); |
| continue; |
| } |
| if (i != 0) { |
| /* More than one 80211 core is only supported |
| * by special chips. |
| * There are chips with two 80211 cores, but with |
| * dangling pins on the second core. Be careful |
| * and ignore these cores here. |
| */ |
| if (1 /*bcm->pci_dev->device != 0x4324*/ ) { |
| /* TODO: A PHY */ |
| dprintk(KERN_INFO PFX "Ignoring additional 802.11a core.\n"); |
| continue; |
| } |
| } |
| switch (core_rev) { |
| case 2: |
| case 4: |
| case 5: |
| case 6: |
| case 7: |
| case 9: |
| case 10: |
| break; |
| default: |
| printk(KERN_WARNING PFX |
| "Unsupported 80211 core revision %u\n", |
| core_rev); |
| } |
| bcm->nr_80211_available++; |
| core->priv = ext_80211; |
| bcm43xx_init_struct_phyinfo(&ext_80211->phy); |
| bcm43xx_init_struct_radioinfo(&ext_80211->radio); |
| break; |
| case BCM43xx_COREID_CHIPCOMMON: |
| printk(KERN_WARNING PFX "Multiple CHIPCOMMON cores found.\n"); |
| break; |
| } |
| if (core) { |
| core->available = 1; |
| core->id = core_id; |
| core->rev = core_rev; |
| core->index = current_core; |
| } |
| } |
| |
| if (!bcm->core_80211[0].available) { |
| printk(KERN_ERR PFX "Error: No 80211 core found!\n"); |
| err = -ENODEV; |
| goto out; |
| } |
| |
| err = bcm43xx_switch_core(bcm, &bcm->core_80211[0]); |
| |
| assert(err == 0); |
| out: |
| return err; |
| } |
| |
| static void bcm43xx_gen_bssid(struct bcm43xx_private *bcm) |
| { |
| const u8 *mac = (const u8*)(bcm->net_dev->dev_addr); |
| u8 *bssid = bcm->ieee->bssid; |
| |
| switch (bcm->ieee->iw_mode) { |
| case IW_MODE_ADHOC: |
| random_ether_addr(bssid); |
| break; |
| case IW_MODE_MASTER: |
| case IW_MODE_INFRA: |
| case IW_MODE_REPEAT: |
| case IW_MODE_SECOND: |
| case IW_MODE_MONITOR: |
| memcpy(bssid, mac, ETH_ALEN); |
| break; |
| default: |
| assert(0); |
| } |
| } |
| |
| static void bcm43xx_rate_memory_write(struct bcm43xx_private *bcm, |
| u16 rate, |
| int is_ofdm) |
| { |
| u16 offset; |
| |
| if (is_ofdm) { |
| offset = 0x480; |
| offset += (bcm43xx_plcp_get_ratecode_ofdm(rate) & 0x000F) * 2; |
| } |
| else { |
| offset = 0x4C0; |
| offset += (bcm43xx_plcp_get_ratecode_cck(rate) & 0x000F) * 2; |
| } |
| bcm43xx_shm_write16(bcm, BCM43xx_SHM_SHARED, offset + 0x20, |
| bcm43xx_shm_read16(bcm, BCM43xx_SHM_SHARED, offset)); |
| } |
| |
| static void bcm43xx_rate_memory_init(struct bcm43xx_private *bcm) |
| { |
| switch (bcm43xx_current_phy(bcm)->type) { |
| case BCM43xx_PHYTYPE_A: |
| case BCM43xx_PHYTYPE_G: |
| bcm43xx_rate_memory_write(bcm, IEEE80211_OFDM_RATE_6MB, 1); |
| bcm43xx_rate_memory_write(bcm, IEEE80211_OFDM_RATE_12MB, 1); |
| bcm43xx_rate_memory_write(bcm, IEEE80211_OFDM_RATE_18MB, 1); |
| bcm43xx_rate_memory_write(bcm, IEEE80211_OFDM_RATE_24MB, 1); |
| bcm43xx_rate_memory_write(bcm, IEEE80211_OFDM_RATE_36MB, 1); |
| bcm43xx_rate_memory_write(bcm, IEEE80211_OFDM_RATE_48MB, 1); |
| bcm43xx_rate_memory_write(bcm, IEEE80211_OFDM_RATE_54MB, 1); |
| case BCM43xx_PHYTYPE_B: |
| bcm43xx_rate_memory_write(bcm, IEEE80211_CCK_RATE_1MB, 0); |
| bcm43xx_rate_memory_write(bcm, IEEE80211_CCK_RATE_2MB, 0); |
| bcm43xx_rate_memory_write(bcm, IEEE80211_CCK_RATE_5MB, 0); |
| bcm43xx_rate_memory_write(bcm, IEEE80211_CCK_RATE_11MB, 0); |
| break; |
| default: |
| assert(0); |
| } |
| } |
| |
| static void bcm43xx_wireless_core_cleanup(struct bcm43xx_private *bcm) |
| { |
| bcm43xx_chip_cleanup(bcm); |
| bcm43xx_pio_free(bcm); |
| bcm43xx_dma_free(bcm); |
| |
| bcm->current_core->initialized = 0; |
| } |
| |
| /* http://bcm-specs.sipsolutions.net/80211Init */ |
| static int bcm43xx_wireless_core_init(struct bcm43xx_private *bcm, |
| int active_wlcore) |
| { |
| struct bcm43xx_phyinfo *phy = bcm43xx_current_phy(bcm); |
| struct bcm43xx_radioinfo *radio = bcm43xx_current_radio(bcm); |
| u32 ucodeflags; |
| int err; |
| u32 sbimconfiglow; |
| u8 limit; |
| |
| if (bcm->core_pci.rev <= 5 && bcm->core_pci.id != BCM43xx_COREID_PCIE) { |
| sbimconfiglow = bcm43xx_read32(bcm, BCM43xx_CIR_SBIMCONFIGLOW); |
| sbimconfiglow &= ~ BCM43xx_SBIMCONFIGLOW_REQUEST_TOUT_MASK; |
| sbimconfiglow &= ~ BCM43xx_SBIMCONFIGLOW_SERVICE_TOUT_MASK; |
| if (bcm->bustype == BCM43xx_BUSTYPE_PCI) |
| sbimconfiglow |= 0x32; |
| else |
| sbimconfiglow |= 0x53; |
| bcm43xx_write32(bcm, BCM43xx_CIR_SBIMCONFIGLOW, sbimconfiglow); |
| } |
| |
| bcm43xx_phy_calibrate(bcm); |
| err = bcm43xx_chip_init(bcm); |
| if (err) |
| goto out; |
| |
| bcm43xx_shm_write16(bcm, BCM43xx_SHM_SHARED, 0x0016, bcm->current_core->rev); |
| ucodeflags = bcm43xx_shm_read32(bcm, BCM43xx_SHM_SHARED, BCM43xx_UCODEFLAGS_OFFSET); |
| |
| if (0 /*FIXME: which condition has to be used here? */) |
| ucodeflags |= 0x00000010; |
| |
| /* HW decryption needs to be set now */ |
| ucodeflags |= 0x40000000; |
| |
| if (phy->type == BCM43xx_PHYTYPE_G) { |
| ucodeflags |= BCM43xx_UCODEFLAG_UNKBGPHY; |
| if (phy->rev == 1) |
| ucodeflags |= BCM43xx_UCODEFLAG_UNKGPHY; |
| if (bcm->sprom.boardflags & BCM43xx_BFL_PACTRL) |
| ucodeflags |= BCM43xx_UCODEFLAG_UNKPACTRL; |
| } else if (phy->type == BCM43xx_PHYTYPE_B) { |
| ucodeflags |= BCM43xx_UCODEFLAG_UNKBGPHY; |
| if (phy->rev >= 2 && radio->version == 0x2050) |
| ucodeflags &= ~BCM43xx_UCODEFLAG_UNKGPHY; |
| } |
| |
| if (ucodeflags != bcm43xx_shm_read32(bcm, BCM43xx_SHM_SHARED, |
| BCM43xx_UCODEFLAGS_OFFSET)) { |
| bcm43xx_shm_write32(bcm, BCM43xx_SHM_SHARED, |
| BCM43xx_UCODEFLAGS_OFFSET, ucodeflags); |
| } |
| |
| /* Short/Long Retry Limit. |
| * The retry-limit is a 4-bit counter. Enforce this to avoid overflowing |
| * the chip-internal counter. |
| */ |
| limit = limit_value(modparam_short_retry, 0, 0xF); |
| bcm43xx_shm_write32(bcm, BCM43xx_SHM_WIRELESS, 0x0006, limit); |
| limit = limit_value(modparam_long_retry, 0, 0xF); |
| bcm43xx_shm_write32(bcm, BCM43xx_SHM_WIRELESS, 0x0007, limit); |
| |
| bcm43xx_shm_write16(bcm, BCM43xx_SHM_SHARED, 0x0044, 3); |
| bcm43xx_shm_write16(bcm, BCM43xx_SHM_SHARED, 0x0046, 2); |
| |
| bcm43xx_rate_memory_init(bcm); |
| |
| /* Minimum Contention Window */ |
| if (phy->type == BCM43xx_PHYTYPE_B) |
| bcm43xx_shm_write32(bcm, BCM43xx_SHM_WIRELESS, 0x0003, 0x0000001f); |
| else |
| bcm43xx_shm_write32(bcm, BCM43xx_SHM_WIRELESS, 0x0003, 0x0000000f); |
| /* Maximum Contention Window */ |
| bcm43xx_shm_write32(bcm, BCM43xx_SHM_WIRELESS, 0x0004, 0x000003ff); |
| |
| bcm43xx_gen_bssid(bcm); |
| bcm43xx_write_mac_bssid_templates(bcm); |
| |
| if (bcm->current_core->rev >= 5) |
| bcm43xx_write16(bcm, 0x043C, 0x000C); |
| |
| if (active_wlcore) { |
| if (bcm43xx_using_pio(bcm)) { |
| err = bcm43xx_pio_init(bcm); |
| } else { |
| err = bcm43xx_dma_init(bcm); |
| if (err == -ENOSYS) |
| err = bcm43xx_pio_init(bcm); |
| } |
| if (err) |
| goto err_chip_cleanup; |
| } |
| bcm43xx_write16(bcm, 0x0612, 0x0050); |
| bcm43xx_shm_write16(bcm, BCM43xx_SHM_SHARED, 0x0416, 0x0050); |
| bcm43xx_shm_write16(bcm, BCM43xx_SHM_SHARED, 0x0414, 0x01F4); |
| |
| if (active_wlcore) { |
| if (radio->initial_channel != 0xFF) |
| bcm43xx_radio_selectchannel(bcm, radio->initial_channel, 0); |
| } |
| |
| /* Don't enable MAC/IRQ here, as it will race with the IRQ handler. |
| * We enable it later. |
| */ |
| bcm->current_core->initialized = 1; |
| out: |
| return err; |
| |
| err_chip_cleanup: |
| bcm43xx_chip_cleanup(bcm); |
| goto out; |
| } |
| |
| static int bcm43xx_chipset_attach(struct bcm43xx_private *bcm) |
| { |
| int err; |
| u16 pci_status; |
| |
| err = bcm43xx_pctl_set_crystal(bcm, 1); |
| if (err) |
| goto out; |
| err = bcm43xx_pci_read_config16(bcm, PCI_STATUS, &pci_status); |
| if (err) |
| goto out; |
| err = bcm43xx_pci_write_config16(bcm, PCI_STATUS, pci_status & ~PCI_STATUS_SIG_TARGET_ABORT); |
| |
| out: |
| return err; |
| } |
| |
| static void bcm43xx_chipset_detach(struct bcm43xx_private *bcm) |
| { |
| bcm43xx_pctl_set_clock(bcm, BCM43xx_PCTL_CLK_SLOW); |
| bcm43xx_pctl_set_crystal(bcm, 0); |
| } |
| |
| static void bcm43xx_pcicore_broadcast_value(struct bcm43xx_private *bcm, |
| u32 address, |
| u32 data) |
| { |
| bcm43xx_write32(bcm, BCM43xx_PCICORE_BCAST_ADDR, address); |
| bcm43xx_write32(bcm, BCM43xx_PCICORE_BCAST_DATA, data); |
| } |
| |
| static int bcm43xx_pcicore_commit_settings(struct bcm43xx_private *bcm) |
| { |
| int err = 0; |
| |
| bcm->irq_savedstate = bcm43xx_interrupt_disable(bcm, BCM43xx_IRQ_ALL); |
| |
| if (bcm->core_chipcommon.available) { |
| err = bcm43xx_switch_core(bcm, &bcm->core_chipcommon); |
| if (err) |
| goto out; |
| |
| bcm43xx_pcicore_broadcast_value(bcm, 0xfd8, 0x00000000); |
| |
| /* this function is always called when a PCI core is mapped */ |
| err = bcm43xx_switch_core(bcm, &bcm->core_pci); |
| if (err) |
| goto out; |
| } else |
| bcm43xx_pcicore_broadcast_value(bcm, 0xfd8, 0x00000000); |
| |
| bcm43xx_interrupt_enable(bcm, bcm->irq_savedstate); |
| |
| out: |
| return err; |
| } |
| |
| static u32 bcm43xx_pcie_reg_read(struct bcm43xx_private *bcm, u32 address) |
| { |
| bcm43xx_write32(bcm, BCM43xx_PCIECORE_REG_ADDR, address); |
| return bcm43xx_read32(bcm, BCM43xx_PCIECORE_REG_DATA); |
| } |
| |
| static void bcm43xx_pcie_reg_write(struct bcm43xx_private *bcm, u32 address, |
| u32 data) |
| { |
| bcm43xx_write32(bcm, BCM43xx_PCIECORE_REG_ADDR, address); |
| bcm43xx_write32(bcm, BCM43xx_PCIECORE_REG_DATA, data); |
| } |
| |
| static void bcm43xx_pcie_mdio_write(struct bcm43xx_private *bcm, u8 dev, u8 reg, |
| u16 data) |
| { |
| int i; |
| |
| bcm43xx_write32(bcm, BCM43xx_PCIECORE_MDIO_CTL, 0x0082); |
| bcm43xx_write32(bcm, BCM43xx_PCIECORE_MDIO_DATA, BCM43xx_PCIE_MDIO_ST | |
| BCM43xx_PCIE_MDIO_WT | (dev << BCM43xx_PCIE_MDIO_DEV) | |
| (reg << BCM43xx_PCIE_MDIO_REG) | BCM43xx_PCIE_MDIO_TA | |
| data); |
| udelay(10); |
| |
| for (i = 0; i < 10; i++) { |
| if (bcm43xx_read32(bcm, BCM43xx_PCIECORE_MDIO_CTL) & |
| BCM43xx_PCIE_MDIO_TC) |
| break; |
| msleep(1); |
| } |
| bcm43xx_write32(bcm, BCM43xx_PCIECORE_MDIO_CTL, 0); |
| } |
| |
| /* Make an I/O Core usable. "core_mask" is the bitmask of the cores to enable. |
| * To enable core 0, pass a core_mask of 1<<0 |
| */ |
| static int bcm43xx_setup_backplane_pci_connection(struct bcm43xx_private *bcm, |
| u32 core_mask) |
| { |
| u32 backplane_flag_nr; |
| u32 value; |
| struct bcm43xx_coreinfo *old_core; |
| int err = 0; |
| |
| value = bcm43xx_read32(bcm, BCM43xx_CIR_SBTPSFLAG); |
| backplane_flag_nr = value & BCM43xx_BACKPLANE_FLAG_NR_MASK; |
| |
| old_core = bcm->current_core; |
| err = bcm43xx_switch_core(bcm, &bcm->core_pci); |
| if (err) |
| goto out; |
| |
| if (bcm->current_core->rev < 6 && |
| bcm->current_core->id == BCM43xx_COREID_PCI) { |
| value = bcm43xx_read32(bcm, BCM43xx_CIR_SBINTVEC); |
| value |= (1 << backplane_flag_nr); |
| bcm43xx_write32(bcm, BCM43xx_CIR_SBINTVEC, value); |
| } else { |
| err = bcm43xx_pci_read_config32(bcm, BCM43xx_PCICFG_ICR, &value); |
| if (err) { |
| printk(KERN_ERR PFX "Error: ICR setup failure!\n"); |
| goto out_switch_back; |
| } |
| value |= core_mask << 8; |
| err = bcm43xx_pci_write_config32(bcm, BCM43xx_PCICFG_ICR, value); |
| if (err) { |
| printk(KERN_ERR PFX "Error: ICR setup failure!\n"); |
| goto out_switch_back; |
| } |
| } |
| |
| if (bcm->current_core->id == BCM43xx_COREID_PCI) { |
| value = bcm43xx_read32(bcm, BCM43xx_PCICORE_SBTOPCI2); |
| value |= BCM43xx_SBTOPCI2_PREFETCH | BCM43xx_SBTOPCI2_BURST; |
| bcm43xx_write32(bcm, BCM43xx_PCICORE_SBTOPCI2, value); |
| |
| if (bcm->current_core->rev < 5) { |
| value = bcm43xx_read32(bcm, BCM43xx_CIR_SBIMCONFIGLOW); |
| value |= (2 << BCM43xx_SBIMCONFIGLOW_SERVICE_TOUT_SHIFT) |
| & BCM43xx_SBIMCONFIGLOW_SERVICE_TOUT_MASK; |
| value |= (3 << BCM43xx_SBIMCONFIGLOW_REQUEST_TOUT_SHIFT) |
| & BCM43xx_SBIMCONFIGLOW_REQUEST_TOUT_MASK; |
| bcm43xx_write32(bcm, BCM43xx_CIR_SBIMCONFIGLOW, value); |
| err = bcm43xx_pcicore_commit_settings(bcm); |
| assert(err == 0); |
| } else if (bcm->current_core->rev >= 11) { |
| value = bcm43xx_read32(bcm, BCM43xx_PCICORE_SBTOPCI2); |
| value |= BCM43xx_SBTOPCI2_MEMREAD_MULTI; |
| bcm43xx_write32(bcm, BCM43xx_PCICORE_SBTOPCI2, value); |
| } |
| } else { |
| if (bcm->current_core->rev == 0 || bcm->current_core->rev == 1) { |
| value = bcm43xx_pcie_reg_read(bcm, BCM43xx_PCIE_TLP_WORKAROUND); |
| value |= 0x8; |
| bcm43xx_pcie_reg_write(bcm, BCM43xx_PCIE_TLP_WORKAROUND, |
| value); |
| } |
| if (bcm->current_core->rev == 0) { |
| bcm43xx_pcie_mdio_write(bcm, BCM43xx_MDIO_SERDES_RX, |
| BCM43xx_SERDES_RXTIMER, 0x8128); |
| bcm43xx_pcie_mdio_write(bcm, BCM43xx_MDIO_SERDES_RX, |
| BCM43xx_SERDES_CDR, 0x0100); |
| bcm43xx_pcie_mdio_write(bcm, BCM43xx_MDIO_SERDES_RX, |
| BCM43xx_SERDES_CDR_BW, 0x1466); |
| } else if (bcm->current_core->rev == 1) { |
| value = bcm43xx_pcie_reg_read(bcm, BCM43xx_PCIE_DLLP_LINKCTL); |
| value |= 0x40; |
| bcm43xx_pcie_reg_write(bcm, BCM43xx_PCIE_DLLP_LINKCTL, |
| value); |
| } |
| } |
| out_switch_back: |
| err = bcm43xx_switch_core(bcm, old_core); |
| out: |
| return err; |
| } |
| |
| static void bcm43xx_periodic_every120sec(struct bcm43xx_private *bcm) |
| { |
| struct bcm43xx_phyinfo *phy = bcm43xx_current_phy(bcm); |
| |
| if (phy->type != BCM43xx_PHYTYPE_G || phy->rev < 2) |
| return; |
| |
| bcm43xx_mac_suspend(bcm); |
| bcm43xx_phy_lo_g_measure(bcm); |
| bcm43xx_mac_enable(bcm); |
| } |
| |
| static void bcm43xx_periodic_every60sec(struct bcm43xx_private *bcm) |
| { |
| bcm43xx_phy_lo_mark_all_unused(bcm); |
| if (bcm->sprom.boardflags & BCM43xx_BFL_RSSI) { |
| bcm43xx_mac_suspend(bcm); |
| bcm43xx_calc_nrssi_slope(bcm); |
| bcm43xx_mac_enable(bcm); |
| } |
| } |
| |
| static void bcm43xx_periodic_every30sec(struct bcm43xx_private *bcm) |
| { |
| /* Update device statistics. */ |
| bcm43xx_calculate_link_quality(bcm); |
| } |
| |
| static void bcm43xx_periodic_every15sec(struct bcm43xx_private *bcm) |
| { |
| bcm43xx_phy_xmitpower(bcm); //FIXME: unless scanning? |
| //TODO for APHY (temperature?) |
| } |
| |
| static void bcm43xx_periodic_every1sec(struct bcm43xx_private *bcm) |
| { |
| struct bcm43xx_phyinfo *phy = bcm43xx_current_phy(bcm); |
| struct bcm43xx_radioinfo *radio = bcm43xx_current_radio(bcm); |
| int radio_hw_enable; |
| |
| /* check if radio hardware enabled status changed */ |
| radio_hw_enable = bcm43xx_is_hw_radio_enabled(bcm); |
| if (unlikely(bcm->radio_hw_enable != radio_hw_enable)) { |
| bcm->radio_hw_enable = radio_hw_enable; |
| printk(KERN_INFO PFX "Radio hardware status changed to %s\n", |
| (radio_hw_enable == 0) ? "disabled" : "enabled"); |
| bcm43xx_leds_update(bcm, 0); |
| } |
| if (phy->type == BCM43xx_PHYTYPE_G) { |
| //TODO: update_aci_moving_average |
| if (radio->aci_enable && radio->aci_wlan_automatic) { |
| bcm43xx_mac_suspend(bcm); |
| if (!radio->aci_enable && 1 /*TODO: not scanning? */) { |
| if (0 /*TODO: bunch of conditions*/) { |
| bcm43xx_radio_set_interference_mitigation(bcm, |
| BCM43xx_RADIO_INTERFMODE_MANUALWLAN); |
| } |
| } else if (1/*TODO*/) { |
| /* |
| if ((aci_average > 1000) && !(bcm43xx_radio_aci_scan(bcm))) { |
| bcm43xx_radio_set_interference_mitigation(bcm, |
| BCM43xx_RADIO_INTERFMODE_NONE); |
| } |
| */ |
| } |
| bcm43xx_mac_enable(bcm); |
| } else if (radio->interfmode == BCM43xx_RADIO_INTERFMODE_NONWLAN && |
| phy->rev == 1) { |
| //TODO: implement rev1 workaround |
| } |
| } |
| } |
| |
| static void do_periodic_work(struct bcm43xx_private *bcm) |
| { |
| if (bcm->periodic_state % 120 == 0) |
| bcm43xx_periodic_every120sec(bcm); |
| if (bcm->periodic_state % 60 == 0) |
| bcm43xx_periodic_every60sec(bcm); |
| if (bcm->periodic_state % 30 == 0) |
| bcm43xx_periodic_every30sec(bcm); |
| if (bcm->periodic_state % 15 == 0) |
| bcm43xx_periodic_every15sec(bcm); |
| bcm43xx_periodic_every1sec(bcm); |
| |
| schedule_delayed_work(&bcm->periodic_work, HZ); |
| } |
| |
| static void bcm43xx_periodic_work_handler(struct work_struct *work) |
| { |
| struct bcm43xx_private *bcm = |
| container_of(work, struct bcm43xx_private, periodic_work.work); |
| struct net_device *net_dev = bcm->net_dev; |
| unsigned long flags; |
| u32 savedirqs = 0; |
| unsigned long orig_trans_start = 0; |
| |
| mutex_lock(&bcm->mutex); |
| /* keep from doing and rearming periodic work if shutting down */ |
| if (bcm43xx_status(bcm) == BCM43xx_STAT_UNINIT) |
| goto unlock_mutex; |
| if (unlikely(bcm->periodic_state % 60 == 0)) { |
| /* Periodic work will take a long time, so we want it to |
| * be preemtible. |
| */ |
| |
| netif_tx_lock_bh(net_dev); |
| /* We must fake a started transmission here, as we are going to |
| * disable TX. If we wouldn't fake a TX, it would be possible to |
| * trigger the netdev watchdog, if the last real TX is already |
| * some time on the past (slightly less than 5secs) |
| */ |
| orig_trans_start = net_dev->trans_start; |
| net_dev->trans_start = jiffies; |
| netif_stop_queue(net_dev); |
| netif_tx_unlock_bh(net_dev); |
| |
| spin_lock_irqsave(&bcm->irq_lock, flags); |
| bcm43xx_mac_suspend(bcm); |
| if (bcm43xx_using_pio(bcm)) |
| bcm43xx_pio_freeze_txqueues(bcm); |
| savedirqs = bcm43xx_interrupt_disable(bcm, BCM43xx_IRQ_ALL); |
| spin_unlock_irqrestore(&bcm->irq_lock, flags); |
| bcm43xx_synchronize_irq(bcm); |
| } else { |
| /* Periodic work should take short time, so we want low |
| * locking overhead. |
| */ |
| spin_lock_irqsave(&bcm->irq_lock, flags); |
| } |
| |
| do_periodic_work(bcm); |
| |
| if (unlikely(bcm->periodic_state % 60 == 0)) { |
| spin_lock_irqsave(&bcm->irq_lock, flags); |
| tasklet_enable(&bcm->isr_tasklet); |
| bcm43xx_interrupt_enable(bcm, savedirqs); |
| if (bcm43xx_using_pio(bcm)) |
| bcm43xx_pio_thaw_txqueues(bcm); |
| bcm43xx_mac_enable(bcm); |
| netif_wake_queue(bcm->net_dev); |
| net_dev->trans_start = orig_trans_start; |
| } |
| mmiowb(); |
| bcm->periodic_state++; |
| spin_unlock_irqrestore(&bcm->irq_lock, flags); |
| unlock_mutex: |
| mutex_unlock(&bcm->mutex); |
| } |
| |
| void bcm43xx_periodic_tasks_setup(struct bcm43xx_private *bcm) |
| { |
| struct delayed_work *work = &bcm->periodic_work; |
| |
| assert(bcm43xx_status(bcm) == BCM43xx_STAT_INITIALIZED); |
| INIT_DELAYED_WORK(work, bcm43xx_periodic_work_handler); |
| schedule_delayed_work(work, 0); |
| } |
| |
| static void bcm43xx_security_init(struct bcm43xx_private *bcm) |
| { |
| bcm->security_offset = bcm43xx_shm_read16(bcm, BCM43xx_SHM_SHARED, |
| 0x0056) * 2; |
| bcm43xx_clear_keys(bcm); |
| } |
| |
| static int bcm43xx_rng_read(struct hwrng *rng, u32 *data) |
| { |
| struct bcm43xx_private *bcm = (struct bcm43xx_private *)rng->priv; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&(bcm)->irq_lock, flags); |
| *data = bcm43xx_read16(bcm, BCM43xx_MMIO_RNG); |
| spin_unlock_irqrestore(&(bcm)->irq_lock, flags); |
| |
| return (sizeof(u16)); |
| } |
| |
| static void bcm43xx_rng_exit(struct bcm43xx_private *bcm) |
| { |
| hwrng_unregister(&bcm->rng); |
| } |
| |
| static int bcm43xx_rng_init(struct bcm43xx_private *bcm) |
| { |
| int err; |
| |
| snprintf(bcm->rng_name, ARRAY_SIZE(bcm->rng_name), |
| "%s_%s", KBUILD_MODNAME, bcm->net_dev->name); |
| bcm->rng.name = bcm->rng_name; |
| bcm->rng.data_read = bcm43xx_rng_read; |
| bcm->rng.priv = (unsigned long)bcm; |
| err = hwrng_register(&bcm->rng); |
| if (err) |
| printk(KERN_ERR PFX "RNG init failed (%d)\n", err); |
| |
| return err; |
| } |
| |
| void bcm43xx_cancel_work(struct bcm43xx_private *bcm) |
| { |
| /* The system must be unlocked when this routine is entered. |
| * If not, the next 2 steps may deadlock */ |
| cancel_work_sync(&bcm->restart_work); |
| cancel_delayed_work_sync(&bcm->periodic_work); |
| } |
| |
| static int bcm43xx_shutdown_all_wireless_cores(struct bcm43xx_private *bcm) |
| { |
| int ret = 0; |
| int i, err; |
| struct bcm43xx_coreinfo *core; |
| |
| bcm43xx_set_status(bcm, BCM43xx_STAT_SHUTTINGDOWN); |
| for (i = 0; i < bcm->nr_80211_available; i++) { |
| core = &(bcm->core_80211[i]); |
| assert(core->available); |
| if (!core->initialized) |
| continue; |
| err = bcm43xx_switch_core(bcm, core); |
| if (err) { |
| dprintk(KERN_ERR PFX "shutdown_all_wireless_cores " |
| "switch_core failed (%d)\n", err); |
| ret = err; |
| continue; |
| } |
| bcm43xx_interrupt_disable(bcm, BCM43xx_IRQ_ALL); |
| bcm43xx_read32(bcm, BCM43xx_MMIO_GEN_IRQ_REASON); /* dummy read */ |
| bcm43xx_wireless_core_cleanup(bcm); |
| if (core == bcm->active_80211_core) |
| bcm->active_80211_core = NULL; |
| } |
| free_irq(bcm->irq, bcm); |
| bcm43xx_set_status(bcm, BCM43xx_STAT_UNINIT); |
| |
| return ret; |
| } |
| |
| /* This is the opposite of bcm43xx_init_board() */ |
| static void bcm43xx_free_board(struct bcm43xx_private *bcm) |
| { |
| bcm43xx_rng_exit(bcm); |
| bcm43xx_sysfs_unregister(bcm); |
| |
| mutex_lock(&(bcm)->mutex); |
| bcm43xx_set_status(bcm, BCM43xx_STAT_UNINIT); |
| mutex_unlock(&(bcm)->mutex); |
| |
| bcm43xx_cancel_work(bcm); |
| |
| mutex_lock(&(bcm)->mutex); |
| bcm43xx_shutdown_all_wireless_cores(bcm); |
| bcm43xx_pctl_set_crystal(bcm, 0); |
| mutex_unlock(&(bcm)->mutex); |
| } |
| |
| static void prepare_phydata_for_init(struct bcm43xx_phyinfo *phy) |
| { |
| phy->antenna_diversity = 0xFFFF; |
| memset(phy->minlowsig, 0xFF, sizeof(phy->minlowsig)); |
| memset(phy->minlowsigpos, 0, sizeof(phy->minlowsigpos)); |
| |
| /* Flags */ |
| phy->calibrated = 0; |
| phy->is_locked = 0; |
| |
| if (phy->_lo_pairs) { |
| memset(phy->_lo_pairs, 0, |
| sizeof(struct bcm43xx_lopair) * BCM43xx_LO_COUNT); |
| } |
| memset(phy->loopback_gain, 0, sizeof(phy->loopback_gain)); |
| } |
| |
| static void prepare_radiodata_for_init(struct bcm43xx_private *bcm, |
| struct bcm43xx_radioinfo *radio) |
| { |
| int i; |
| |
| /* Set default attenuation values. */ |
| radio->baseband_atten = bcm43xx_default_baseband_attenuation(bcm); |
| radio->radio_atten = bcm43xx_default_radio_attenuation(bcm); |
| radio->txctl1 = bcm43xx_default_txctl1(bcm); |
| radio->txctl2 = 0xFFFF; |
| radio->txpwr_offset = 0; |
| |
| /* NRSSI */ |
| radio->nrssislope = 0; |
| for (i = 0; i < ARRAY_SIZE(radio->nrssi); i++) |
| radio->nrssi[i] = -1000; |
| for (i = 0; i < ARRAY_SIZE(radio->nrssi_lt); i++) |
| radio->nrssi_lt[i] = i; |
| |
| radio->lofcal = 0xFFFF; |
| radio->initval = 0xFFFF; |
| |
| radio->aci_enable = 0; |
| radio->aci_wlan_automatic = 0; |
| radio->aci_hw_rssi = 0; |
| } |
| |
| static void prepare_priv_for_init(struct bcm43xx_private *bcm) |
| { |
| int i; |
| struct bcm43xx_coreinfo *core; |
| struct bcm43xx_coreinfo_80211 *wlext; |
| |
| assert(!bcm->active_80211_core); |
| |
| bcm43xx_set_status(bcm, BCM43xx_STAT_INITIALIZING); |
| |
| /* Flags */ |
| bcm->was_initialized = 0; |
| bcm->reg124_set_0x4 = 0; |
| |
| /* Stats */ |
| memset(&bcm->stats, 0, sizeof(bcm->stats)); |
| |
| /* Wireless core data */ |
| for (i = 0; i < BCM43xx_MAX_80211_CORES; i++) { |
| core = &(bcm->core_80211[i]); |
| wlext = core->priv; |
| |
| if (!core->available) |
| continue; |
| assert(wlext == &(bcm->core_80211_ext[i])); |
| |
| prepare_phydata_for_init(&wlext->phy); |
| prepare_radiodata_for_init(bcm, &wlext->radio); |
| } |
| |
| /* IRQ related flags */ |
| bcm->irq_reason = 0; |
| memset(bcm->dma_reason, 0, sizeof(bcm->dma_reason)); |
| bcm->irq_savedstate = BCM43xx_IRQ_INITIAL; |
| |
| bcm->mac_suspended = 1; |
| |
| /* Noise calculation context */ |
| memset(&bcm->noisecalc, 0, sizeof(bcm->noisecalc)); |
| |
| /* Periodic work context */ |
| bcm->periodic_state = 0; |
| } |
| |
| static int wireless_core_up(struct bcm43xx_private *bcm, |
| int active_wlcore) |
| { |
| int err; |
| |
| if (!bcm43xx_core_enabled(bcm)) |
| bcm43xx_wireless_core_reset(bcm, 1); |
| if (!active_wlcore) |
| bcm43xx_wireless_core_mark_inactive(bcm); |
| err = bcm43xx_wireless_core_init(bcm, active_wlcore); |
| if (err) |
| goto out; |
| if (!active_wlcore) |
| bcm43xx_radio_turn_off(bcm); |
| out: |
| return err; |
| } |
| |
| /* Select and enable the "to be used" wireless core. |
| * Locking: bcm->mutex must be aquired before calling this. |
| * bcm->irq_lock must not be aquired. |
| */ |
| int bcm43xx_select_wireless_core(struct bcm43xx_private *bcm, |
| int phytype) |
| { |
| int i, err; |
| struct bcm43xx_coreinfo *active_core = NULL; |
| struct bcm43xx_coreinfo_80211 *active_wlext = NULL; |
| struct bcm43xx_coreinfo *core; |
| struct bcm43xx_coreinfo_80211 *wlext; |
| int adjust_active_sbtmstatelow = 0; |
| |
| might_sleep(); |
| |
| if (phytype < 0) { |
| /* If no phytype is requested, select the first core. */ |
| assert(bcm->core_80211[0].available); |
| wlext = bcm->core_80211[0].priv; |
| phytype = wlext->phy.type; |
| } |
| /* Find the requested core. */ |
| for (i = 0; i < bcm->nr_80211_available; i++) { |
| core = &(bcm->core_80211[i]); |
| wlext = core->priv; |
| if (wlext->phy.type == phytype) { |
| active_core = core; |
| active_wlext = wlext; |
| break; |
| } |
| } |
| if (!active_core) |
| return -ESRCH; /* No such PHYTYPE on this board. */ |
| |
| if (bcm->active_80211_core) { |
| /* We already selected a wl core in the past. |
| * So first clean up everything. |
| */ |
| dprintk(KERN_INFO PFX "select_wireless_core: cleanup\n"); |
| ieee80211softmac_stop(bcm->net_dev); |
| bcm43xx_set_status(bcm, BCM43xx_STAT_INITIALIZED); |
| err = bcm43xx_disable_interrupts_sync(bcm); |
| assert(!err); |
| tasklet_enable(&bcm->isr_tasklet); |
| err = bcm43xx_shutdown_all_wireless_cores(bcm); |
| if (err) |
| goto error; |
| /* Ok, everything down, continue to re-initialize. */ |
| bcm43xx_set_status(bcm, BCM43xx_STAT_INITIALIZING); |
| } |
| |
| /* Reset all data structures. */ |
| prepare_priv_for_init(bcm); |
| |
| err = bcm43xx_pctl_set_clock(bcm, BCM43xx_PCTL_CLK_FAST); |
| if (err) |
| goto error; |
| |
| /* Mark all unused cores "inactive". */ |
| for (i = 0; i < bcm->nr_80211_available; i++) { |
| core = &(bcm->core_80211[i]); |
| wlext = core->priv; |
| |
| if (core == active_core) |
| continue; |
| err = bcm43xx_switch_core(bcm, core); |
| if (err) { |
| dprintk(KERN_ERR PFX "Could not switch to inactive " |
| "802.11 core (%d)\n", err); |
| goto error; |
| } |
| err = wireless_core_up(bcm, 0); |
| if (err) { |
| dprintk(KERN_ERR PFX "core_up for inactive 802.11 core " |
| "failed (%d)\n", err); |
| goto error; |
| } |
| adjust_active_sbtmstatelow = 1; |
| } |
| |
| /* Now initialize the active 802.11 core. */ |
| err = bcm43xx_switch_core(bcm, active_core); |
| if (err) { |
| dprintk(KERN_ERR PFX "Could not switch to active " |
| "802.11 core (%d)\n", err); |
| goto error; |
| } |
| if (adjust_active_sbtmstatelow && |
| active_wlext->phy.type == BCM43xx_PHYTYPE_G) { |
| u32 sbtmstatelow; |
| |
| sbtmstatelow = bcm43xx_read32(bcm, BCM43xx_CIR_SBTMSTATELOW); |
| sbtmstatelow |= BCM43xx_SBTMSTATELOW_G_MODE_ENABLE; |
| bcm43xx_write32(bcm, BCM43xx_CIR_SBTMSTATELOW, sbtmstatelow); |
| } |
| err = wireless_core_up(bcm, 1); |
| if (err) { |
| dprintk(KERN_ERR PFX "core_up for active 802.11 core " |
| "failed (%d)\n", err); |
| goto error; |
| } |
| err = bcm43xx_pctl_set_clock(bcm, BCM43xx_PCTL_CLK_DYNAMIC); |
| if (err) |
| goto error; |
| bcm->active_80211_core = active_core; |
| |
| bcm43xx_macfilter_clear(bcm, BCM43xx_MACFILTER_ASSOC); |
| bcm43xx_macfilter_set(bcm, BCM43xx_MACFILTER_SELF, (u8 *)(bcm->net_dev->dev_addr)); |
| bcm43xx_security_init(bcm); |
| drain_txstatus_queue(bcm); |
| ieee80211softmac_start(bcm->net_dev); |
| |
| /* Let's go! Be careful after enabling the IRQs. |
| * Don't switch cores, for example. |
| */ |
| bcm43xx_mac_enable(bcm); |
| bcm43xx_set_status(bcm, BCM43xx_STAT_INITIALIZED); |
| err = bcm43xx_initialize_irq(bcm); |
| if (err) |
| goto error; |
| bcm43xx_interrupt_enable(bcm, bcm->irq_savedstate); |
| |
| dprintk(KERN_INFO PFX "Selected 802.11 core (phytype %d)\n", |
| active_wlext->phy.type); |
| |
| return 0; |
| |
| error: |
| bcm43xx_set_status(bcm, BCM43xx_STAT_UNINIT); |
| bcm43xx_pctl_set_clock(bcm, BCM43xx_PCTL_CLK_SLOW); |
| return err; |
| } |
| |
| static int bcm43xx_init_board(struct bcm43xx_private *bcm) |
| { |
| int err; |
| |
| mutex_lock(&(bcm)->mutex); |
| |
| tasklet_enable(&bcm->isr_tasklet); |
| err = bcm43xx_pctl_set_crystal(bcm, 1); |
| if (err) |
| goto err_tasklet; |
| err = bcm43xx_pctl_init(bcm); |
| if (err) |
| goto err_crystal_off; |
| err = bcm43xx_select_wireless_core(bcm, -1); |
| if (err) |
| goto err_crystal_off; |
| err = bcm43xx_sysfs_register(bcm); |
| if (err) |
| goto err_wlshutdown; |
| err = bcm43xx_rng_init(bcm); |
| if (err) |
| goto err_sysfs_unreg; |
| bcm43xx_periodic_tasks_setup(bcm); |
| |
| /*FIXME: This should be handled by softmac instead. */ |
| schedule_delayed_work(&bcm->softmac->associnfo.work, 0); |
| |
| out: |
| mutex_unlock(&(bcm)->mutex); |
| |
| return err; |
| |
| err_sysfs_unreg: |
| bcm43xx_sysfs_unregister(bcm); |
| err_wlshutdown: |
| bcm43xx_shutdown_all_wireless_cores(bcm); |
| err_crystal_off: |
| bcm43xx_pctl_set_crystal(bcm, 0); |
| err_tasklet: |
| tasklet_disable(&bcm->isr_tasklet); |
| goto out; |
| } |
| |
| static void bcm43xx_detach_board(struct bcm43xx_private *bcm) |
| { |
| struct pci_dev *pci_dev = bcm->pci_dev; |
| int i; |
| |
| bcm43xx_chipset_detach(bcm); |
| /* Do _not_ access the chip, after it is detached. */ |
| pci_iounmap(pci_dev, bcm->mmio_addr); |
| pci_release_regions(pci_dev); |
| pci_disable_device(pci_dev); |
| |
| /* Free allocated structures/fields */ |
| for (i = 0; i < BCM43xx_MAX_80211_CORES; i++) { |
| kfree(bcm->core_80211_ext[i].phy._lo_pairs); |
| if (bcm->core_80211_ext[i].phy.dyn_tssi_tbl) |
| kfree(bcm->core_80211_ext[i].phy.tssi2dbm); |
| } |
| } |
| |
| static int bcm43xx_read_phyinfo(struct bcm43xx_private *bcm) |
| { |
| struct bcm43xx_phyinfo *phy = bcm43xx_current_phy(bcm); |
| u16 value; |
| u8 phy_analog; |
| u8 phy_type; |
| u8 phy_rev; |
| int phy_rev_ok = 1; |
| void *p; |
| |
| value = bcm43xx_read16(bcm, BCM43xx_MMIO_PHY_VER); |
| |
| phy_analog = (value & 0xF000) >> 12; |
| phy_type = (value & 0x0F00) >> 8; |
| phy_rev = (value & 0x000F); |
| |
| dprintk(KERN_INFO PFX "Detected PHY: Analog: %x, Type %x, Revision %x\n", |
| phy_analog, phy_type, phy_rev); |
| |
| switch (phy_type) { |
| case BCM43xx_PHYTYPE_A: |
| if (phy_rev >= 4) |
| phy_rev_ok = 0; |
| /*FIXME: We need to switch the ieee->modulation, etc.. flags, |
| * if we switch 80211 cores after init is done. |
| * As we do not implement on the fly switching between |
| * wireless cores, I will leave this as a future task. |
| */ |
| bcm->ieee->modulation = IEEE80211_OFDM_MODULATION; |
| bcm->ieee->mode = IEEE_A; |
| bcm->ieee->freq_band = IEEE80211_52GHZ_BAND | |
| IEEE80211_24GHZ_BAND; |
| break; |
| case BCM43xx_PHYTYPE_B: |
| if (phy_rev != 2 && phy_rev != 4 && phy_rev != 6 && phy_rev != 7) |
| phy_rev_ok = 0; |
| bcm->ieee->modulation = IEEE80211_CCK_MODULATION; |
| bcm->ieee->mode = IEEE_B; |
| bcm->ieee->freq_band = IEEE80211_24GHZ_BAND; |
| break; |
| case BCM43xx_PHYTYPE_G: |
| if (phy_rev > 8) |
| phy_rev_ok = 0; |
| bcm->ieee->modulation = IEEE80211_OFDM_MODULATION | |
| IEEE80211_CCK_MODULATION; |
| bcm->ieee->mode = IEEE_G; |
| bcm->ieee->freq_band = IEEE80211_24GHZ_BAND; |
| break; |
| default: |
| printk(KERN_ERR PFX "Error: Unknown PHY Type %x\n", |
| phy_type); |
| return -ENODEV; |
| }; |
| bcm->ieee->perfect_rssi = RX_RSSI_MAX; |
| bcm->ieee->worst_rssi = 0; |
| if (!phy_rev_ok) { |
| printk(KERN_WARNING PFX "Invalid PHY Revision %x\n", |
| phy_rev); |
| } |
| |
| phy->analog = phy_analog; |
| phy->type = phy_type; |
| phy->rev = phy_rev; |
| if ((phy_type == BCM43xx_PHYTYPE_B) || (phy_type == BCM43xx_PHYTYPE_G)) { |
| p = kzalloc(sizeof(struct bcm43xx_lopair) * BCM43xx_LO_COUNT, |
| GFP_KERNEL); |
| if (!p) |
| return -ENOMEM; |
| phy->_lo_pairs = p; |
| } |
| |
| return 0; |
| } |
| |
| static int bcm43xx_attach_board(struct bcm43xx_private *bcm) |
| { |
| struct pci_dev *pci_dev = bcm->pci_dev; |
| struct net_device *net_dev = bcm->net_dev; |
| int err; |
| int i; |
| u32 coremask; |
| |
| err = pci_enable_device(pci_dev); |
| if (err) { |
| printk(KERN_ERR PFX "pci_enable_device() failed\n"); |
| goto out; |
| } |
| err = pci_request_regions(pci_dev, KBUILD_MODNAME); |
| if (err) { |
| printk(KERN_ERR PFX "pci_request_regions() failed\n"); |
| goto err_pci_disable; |
| } |
| /* enable PCI bus-mastering */ |
| pci_set_master(pci_dev); |
| bcm->mmio_addr = pci_iomap(pci_dev, 0, ~0UL); |
| if (!bcm->mmio_addr) { |
| printk(KERN_ERR PFX "pci_iomap() failed\n"); |
| err = -EIO; |
| goto err_pci_release; |
| } |
| net_dev->base_addr = (unsigned long)bcm->mmio_addr; |
| |
| err = bcm43xx_pci_read_config16(bcm, PCI_SUBSYSTEM_VENDOR_ID, |
| &bcm->board_vendor); |
| if (err) |
| goto err_iounmap; |
| err = bcm43xx_pci_read_config16(bcm, PCI_SUBSYSTEM_ID, |
| &bcm->board_type); |
| if (err) |
| goto err_iounmap; |
| |
| bcm->board_revision = bcm->pci_dev->revision; |
| |
| err = bcm43xx_chipset_attach(bcm); |
| if (err) |
| goto err_iounmap; |
| err = bcm43xx_pctl_init(bcm); |
| if (err) |
| goto err_chipset_detach; |
| err = bcm43xx_probe_cores(bcm); |
| if (err) |
| goto err_chipset_detach; |
| |
| /* Attach all IO cores to the backplane. */ |
| coremask = 0; |
| for (i = 0; i < bcm->nr_80211_available; i++) |
| coremask |= (1 << bcm->core_80211[i].index); |
| //FIXME: Also attach some non80211 cores? |
| err = bcm43xx_setup_backplane_pci_connection(bcm, coremask); |
| if (err) { |
| printk(KERN_ERR PFX "Backplane->PCI connection failed!\n"); |
| goto err_chipset_detach; |
| } |
| |
| err = bcm43xx_sprom_extract(bcm); |
| if (err) |
| goto err_chipset_detach; |
| err = bcm43xx_leds_init(bcm); |
| if (err) |
| goto err_chipset_detach; |
| |
| for (i = 0; i < bcm->nr_80211_available; i++) { |
| err = bcm43xx_switch_core(bcm, &bcm->core_80211[i]); |
| assert(err != -ENODEV); |
| if (err) |
| goto err_80211_unwind; |
| |
| /* Enable the selected wireless core. |
| * Connect PHY only on the first core. |
| */ |
| bcm43xx_wireless_core_reset(bcm, (i == 0)); |
| |
| err = bcm43xx_read_phyinfo(bcm); |
| if (err && (i == 0)) |
| goto err_80211_unwind; |
| |
| err = bcm43xx_read_radioinfo(bcm); |
| if (err && (i == 0)) |
| goto err_80211_unwind; |
| |
| err = bcm43xx_validate_chip(bcm); |
| if (err && (i == 0)) |
| goto err_80211_unwind; |
| |
| bcm43xx_radio_turn_off(bcm); |
| err = bcm43xx_phy_init_tssi2dbm_table(bcm); |
| if (err) |
| goto err_80211_unwind; |
| bcm43xx_wireless_core_disable(bcm); |
| } |
| err = bcm43xx_geo_init(bcm); |
| if (err) |
| goto err_80211_unwind; |
| bcm43xx_pctl_set_crystal(bcm, 0); |
| |
| /* Set the MAC address in the networking subsystem */ |
| if (is_valid_ether_addr(bcm->sprom.et1macaddr)) |
| memcpy(bcm->net_dev->dev_addr, bcm->sprom.et1macaddr, 6); |
| else |
| memcpy(bcm->net_dev->dev_addr, bcm->sprom.il0macaddr, 6); |
| |
| snprintf(bcm->nick, IW_ESSID_MAX_SIZE, |
| "Broadcom %04X", bcm->chip_id); |
| |
| assert(err == 0); |
| out: |
| return err; |
| |
| err_80211_unwind: |
| for (i = 0; i < BCM43xx_MAX_80211_CORES; i++) { |
| kfree(bcm->core_80211_ext[i].phy._lo_pairs); |
| if (bcm->core_80211_ext[i].phy.dyn_tssi_tbl) |
| kfree(bcm->core_80211_ext[i].phy.tssi2dbm); |
| } |
| err_chipset_detach: |
| bcm43xx_chipset_detach(bcm); |
| err_iounmap: |
| pci_iounmap(pci_dev, bcm->mmio_addr); |
| err_pci_release: |
| pci_release_regions(pci_dev); |
| err_pci_disable: |
| pci_disable_device(pci_dev); |
| printk(KERN_ERR PFX "Unable to attach board\n"); |
| goto out; |
| } |
| |
| /* Do the Hardware IO operations to send the txb */ |
| static inline int bcm43xx_tx(struct bcm43xx_private *bcm, |
| struct ieee80211_txb *txb) |
| { |
| int err = -ENODEV; |
| |
| if (bcm43xx_using_pio(bcm)) |
| err = bcm43xx_pio_tx(bcm, txb); |
| else |
| err = bcm43xx_dma_tx(bcm, txb); |
| bcm->net_dev->trans_start = jiffies; |
| |
| return err; |
| } |
| |
| static void bcm43xx_ieee80211_set_chan(struct net_device *net_dev, |
| u8 channel) |
| { |
| struct bcm43xx_private *bcm = bcm43xx_priv(net_dev); |
| struct bcm43xx_radioinfo *radio; |
| unsigned long flags; |
| |
| mutex_lock(&bcm->mutex); |
| spin_lock_irqsave(&bcm->irq_lock, flags); |
| if (bcm43xx_status(bcm) == BCM43xx_STAT_INITIALIZED) { |
| bcm43xx_mac_suspend(bcm); |
| bcm43xx_radio_selectchannel(bcm, channel, 0); |
| bcm43xx_mac_enable(bcm); |
| } else { |
| radio = bcm43xx_current_radio(bcm); |
| radio->initial_channel = channel; |
| } |
| spin_unlock_irqrestore(&bcm->irq_lock, flags); |
| mutex_unlock(&bcm->mutex); |
| } |
| |
| /* set_security() callback in struct ieee80211_device */ |
| static void bcm43xx_ieee80211_set_security(struct net_device *net_dev, |
| struct ieee80211_security *sec) |
| { |
| struct bcm43xx_private *bcm = bcm43xx_priv(net_dev); |
| struct ieee80211_security *secinfo = &bcm->ieee->sec; |
| unsigned long flags; |
| int keyidx; |
| |
| dprintk(KERN_INFO PFX "set security called"); |
| |
| mutex_lock(&bcm->mutex); |
| spin_lock_irqsave(&bcm->irq_lock, flags); |
| |
| for (keyidx = 0; keyidx<WEP_KEYS; keyidx++) |
| if (sec->flags & (1<<keyidx)) { |
| secinfo->encode_alg[keyidx] = sec->encode_alg[keyidx]; |
| secinfo->key_sizes[keyidx] = sec->key_sizes[keyidx]; |
| memcpy(secinfo->keys[keyidx], sec->keys[keyidx], SCM_KEY_LEN); |
| } |
| |
| if (sec->flags & SEC_ACTIVE_KEY) { |
| secinfo->active_key = sec->active_key; |
| dprintk(", .active_key = %d", sec->active_key); |
| } |
| if (sec->flags & SEC_UNICAST_GROUP) { |
| secinfo->unicast_uses_group = sec->unicast_uses_group; |
| dprintk(", .unicast_uses_group = %d", sec->unicast_uses_group); |
| } |
| if (sec->flags & SEC_LEVEL) { |
| secinfo->level = sec->level; |
| dprintk(", .level = %d", sec->level); |
| } |
| if (sec->flags & SEC_ENABLED) { |
| secinfo->enabled = sec->enabled; |
| dprintk(", .enabled = %d", sec->enabled); |
| } |
| if (sec->flags & SEC_ENCRYPT) { |
| secinfo->encrypt = sec->encrypt; |
| dprintk(", .encrypt = %d", sec->encrypt); |
| } |
| if (sec->flags & SEC_AUTH_MODE) { |
| secinfo->auth_mode = sec->auth_mode; |
| dprintk(", .auth_mode = %d", sec->auth_mode); |
| } |
| dprintk("\n"); |
| if (bcm43xx_status(bcm) == BCM43xx_STAT_INITIALIZED && |
| !bcm->ieee->host_encrypt) { |
| if (secinfo->enabled) { |
| /* upload WEP keys to hardware */ |
| char null_address[6] = { 0 }; |
| u8 algorithm = 0; |
| for (keyidx = 0; keyidx<WEP_KEYS; keyidx++) { |
| if (!(sec->flags & (1<<keyidx))) |
| continue; |
| switch (sec->encode_alg[keyidx]) { |
| case SEC_ALG_NONE: algorithm = BCM43xx_SEC_ALGO_NONE; break; |
| case SEC_ALG_WEP: |
| algorithm = BCM43xx_SEC_ALGO_WEP; |
| if (secinfo->key_sizes[keyidx] == 13) |
| algorithm = BCM43xx_SEC_ALGO_WEP104; |
| break; |
| case SEC_ALG_TKIP: |
| FIXME(); |
| algorithm = BCM43xx_SEC_ALGO_TKIP; |
| break; |
| case SEC_ALG_CCMP: |
| FIXME(); |
| algorithm = BCM43xx_SEC_ALGO_AES; |
| break; |
| default: |
| assert(0); |
| break; |
| } |
| bcm43xx_key_write(bcm, keyidx, algorithm, sec->keys[keyidx], secinfo->key_sizes[keyidx], &null_address[0]); |
| bcm->key[keyidx].enabled = 1; |
| bcm->key[keyidx].algorithm = algorithm; |
| } |
| } else |
| bcm43xx_clear_keys(bcm); |
| } |
| spin_unlock_irqrestore(&bcm->irq_lock, flags); |
| mutex_unlock(&bcm->mutex); |
| } |
| |
| /* hard_start_xmit() callback in struct ieee80211_device */ |
| static int bcm43xx_ieee80211_hard_start_xmit(struct ieee80211_txb *txb, |
| struct net_device *net_dev, |
| int pri) |
| { |
| struct bcm43xx_private *bcm = bcm43xx_priv(net_dev); |
| int err = -ENODEV; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&bcm->irq_lock, flags); |
| if (likely(bcm43xx_status(bcm) == BCM43xx_STAT_INITIALIZED)) |
| err = bcm43xx_tx(bcm, txb); |
| spin_unlock_irqrestore(&bcm->irq_lock, flags); |
| |
| if (unlikely(err)) |
| return NETDEV_TX_BUSY; |
| return NETDEV_TX_OK; |
| } |
| |
| static void bcm43xx_net_tx_timeout(struct net_device *net_dev) |
| { |
| struct bcm43xx_private *bcm = bcm43xx_priv(net_dev); |
| unsigned long flags; |
| |
| spin_lock_irqsave(&bcm->irq_lock, flags); |
| bcm43xx_controller_restart(bcm, "TX timeout"); |
| spin_unlock_irqrestore(&bcm->irq_lock, flags); |
| } |
| |
| #ifdef CONFIG_NET_POLL_CONTROLLER |
| static void bcm43xx_net_poll_controller(struct net_device *net_dev) |
| { |
| struct bcm43xx_private *bcm = bcm43xx_priv(net_dev); |
| unsigned long flags; |
| |
| local_irq_save(flags); |
| if (bcm43xx_status(bcm) == BCM43xx_STAT_INITIALIZED) |
| bcm43xx_interrupt_handler(bcm->irq, bcm); |
| local_irq_restore(flags); |
| } |
| #endif /* CONFIG_NET_POLL_CONTROLLER */ |
| |
| static int bcm43xx_net_open(struct net_device *net_dev) |
| { |
| struct bcm43xx_private *bcm = bcm43xx_priv(net_dev); |
| |
| return bcm43xx_init_board(bcm); |
| } |
| |
| static int bcm43xx_net_stop(struct net_device *net_dev) |
| { |
| struct bcm43xx_private *bcm = bcm43xx_priv(net_dev); |
| int err; |
| |
| ieee80211softmac_stop(net_dev); |
| err = bcm43xx_disable_interrupts_sync(bcm); |
| assert(!err); |
| bcm43xx_free_board(bcm); |
| bcm43xx_cancel_work(bcm); |
| |
| return 0; |
| } |
| |
| static int bcm43xx_init_private(struct bcm43xx_private *bcm, |
| struct net_device *net_dev, |
| struct pci_dev *pci_dev) |
| { |
| bcm43xx_set_status(bcm, BCM43xx_STAT_UNINIT); |
| bcm->ieee = netdev_priv(net_dev); |
| bcm->softmac = ieee80211_priv(net_dev); |
| bcm->softmac->set_channel = bcm43xx_ieee80211_set_chan; |
| |
| bcm->irq_savedstate = BCM43xx_IRQ_INITIAL; |
| bcm->mac_suspended = 1; |
| bcm->pci_dev = pci_dev; |
| bcm->net_dev = net_dev; |
| bcm->bad_frames_preempt = modparam_bad_frames_preempt; |
| spin_lock_init(&bcm->irq_lock); |
| spin_lock_init(&bcm->leds_lock); |
| mutex_init(&bcm->mutex); |
| tasklet_init(&bcm->isr_tasklet, |
| (void (*)(unsigned long))bcm43xx_interrupt_tasklet, |
| (unsigned long)bcm); |
| tasklet_disable_nosync(&bcm->isr_tasklet); |
| if (modparam_pio) |
| bcm->__using_pio = 1; |
| bcm->rts_threshold = BCM43xx_DEFAULT_RTS_THRESHOLD; |
| |
| /* default to sw encryption for now */ |
| bcm->ieee->host_build_iv = 0; |
| bcm->ieee->host_encrypt = 1; |
| bcm->ieee->host_decrypt = 1; |
| |
| bcm->ieee->iw_mode = BCM43xx_INITIAL_IWMODE; |
| bcm->ieee->tx_headroom = sizeof(struct bcm43xx_txhdr); |
| bcm->ieee->set_security = bcm43xx_ieee80211_set_security; |
| bcm->ieee->hard_start_xmit = bcm43xx_ieee80211_hard_start_xmit; |
| |
| return 0; |
| } |
| |
| static int __devinit bcm43xx_init_one(struct pci_dev *pdev, |
| const struct pci_device_id *ent) |
| { |
| struct net_device *net_dev; |
| struct bcm43xx_private *bcm; |
| int err; |
| |
| #ifdef DEBUG_SINGLE_DEVICE_ONLY |
| if (strcmp(pci_name(pdev), DEBUG_SINGLE_DEVICE_ONLY)) |
| return -ENODEV; |
| #endif |
| |
| net_dev = alloc_ieee80211softmac(sizeof(*bcm)); |
| if (!net_dev) { |
| printk(KERN_ERR PFX |
| "could not allocate ieee80211 device %s\n", |
| pci_name(pdev)); |
| err = -ENOMEM; |
| goto out; |
| } |
| /* initialize the net_device struct */ |
| SET_NETDEV_DEV(net_dev, &pdev->dev); |
| |
| net_dev->open = bcm43xx_net_open; |
| net_dev->stop = bcm43xx_net_stop; |
| net_dev->tx_timeout = bcm43xx_net_tx_timeout; |
| #ifdef CONFIG_NET_POLL_CONTROLLER |
| net_dev->poll_controller = bcm43xx_net_poll_controller; |
| #endif |
| net_dev->wireless_handlers = &bcm43xx_wx_handlers_def; |
| net_dev->irq = pdev->irq; |
| SET_ETHTOOL_OPS(net_dev, &bcm43xx_ethtool_ops); |
| |
| /* initialize the bcm43xx_private struct */ |
| bcm = bcm43xx_priv(net_dev); |
| memset(bcm, 0, sizeof(*bcm)); |
| err = bcm43xx_init_private(bcm, net_dev, pdev); |
| if (err) |
| goto err_free_netdev; |
| |
| pci_set_drvdata(pdev, net_dev); |
| |
| err = bcm43xx_attach_board(bcm); |
| if (err) |
| goto err_free_netdev; |
| |
| err = register_netdev(net_dev); |
| if (err) { |
| printk(KERN_ERR PFX "Cannot register net device, " |
| "aborting.\n"); |
| err = -ENOMEM; |
| goto err_detach_board; |
| } |
| |
| bcm43xx_debugfs_add_device(bcm); |
| |
| assert(err == 0); |
| out: |
| return err; |
| |
| err_detach_board: |
| bcm43xx_detach_board(bcm); |
| err_free_netdev: |
| free_ieee80211softmac(net_dev); |
| goto out; |
| } |
| |
| static void __devexit bcm43xx_remove_one(struct pci_dev *pdev) |
| { |
| struct net_device *net_dev = pci_get_drvdata(pdev); |
| struct bcm43xx_private *bcm = bcm43xx_priv(net_dev); |
| |
| bcm43xx_debugfs_remove_device(bcm); |
| unregister_netdev(net_dev); |
| bcm43xx_detach_board(bcm); |
| free_ieee80211softmac(net_dev); |
| } |
| |
| /* Hard-reset the chip. Do not call this directly. |
| * Use bcm43xx_controller_restart() |
| */ |
| static void bcm43xx_chip_reset(struct work_struct *work) |
| { |
| struct bcm43xx_private *bcm = |
| container_of(work, struct bcm43xx_private, restart_work); |
| struct bcm43xx_phyinfo *phy; |
| int err = -ENODEV; |
| |
| bcm43xx_cancel_work(bcm); |
| mutex_lock(&(bcm)->mutex); |
| if (bcm43xx_status(bcm) == BCM43xx_STAT_INITIALIZED) { |
| phy = bcm43xx_current_phy(bcm); |
| err = bcm43xx_select_wireless_core(bcm, phy->type); |
| if (!err) |
| bcm43xx_periodic_tasks_setup(bcm); |
| } |
| mutex_unlock(&(bcm)->mutex); |
| |
| printk(KERN_ERR PFX "Controller restart%s\n", |
| (err == 0) ? "ed" : " failed"); |
| } |
| |
| /* Hard-reset the chip. |
| * This can be called from interrupt or process context. |
| * bcm->irq_lock must be locked. |
| */ |
| void bcm43xx_controller_restart(struct bcm43xx_private *bcm, const char *reason) |
| { |
| if (bcm43xx_status(bcm) != BCM43xx_STAT_INITIALIZED) |
| return; |
| printk(KERN_ERR PFX "Controller RESET (%s) ...\n", reason); |
| INIT_WORK(&bcm->restart_work, bcm43xx_chip_reset); |
| schedule_work(&bcm->restart_work); |
| } |
| |
| #ifdef CONFIG_PM |
| |
| static int bcm43xx_suspend(struct pci_dev *pdev, pm_message_t state) |
| { |
| struct net_device *net_dev = pci_get_drvdata(pdev); |
| struct bcm43xx_private *bcm = bcm43xx_priv(net_dev); |
| int err; |
| |
| dprintk(KERN_INFO PFX "Suspending...\n"); |
| |
| netif_device_detach(net_dev); |
| bcm->was_initialized = 0; |
| if (bcm43xx_status(bcm) == BCM43xx_STAT_INITIALIZED) { |
| bcm->was_initialized = 1; |
| ieee80211softmac_stop(net_dev); |
| err = bcm43xx_disable_interrupts_sync(bcm); |
| if (unlikely(err)) { |
| dprintk(KERN_ERR PFX "Suspend failed.\n"); |
| return -EAGAIN; |
| } |
| bcm->firmware_norelease = 1; |
| bcm43xx_free_board(bcm); |
| bcm->firmware_norelease = 0; |
| } |
| bcm43xx_chipset_detach(bcm); |
| |
| pci_save_state(pdev); |
| pci_disable_device(pdev); |
| pci_set_power_state(pdev, pci_choose_state(pdev, state)); |
| |
| dprintk(KERN_INFO PFX "Device suspended.\n"); |
| |
| return 0; |
| } |
| |
| static int bcm43xx_resume(struct pci_dev *pdev) |
| { |
| struct net_device *net_dev = pci_get_drvdata(pdev); |
| struct bcm43xx_private *bcm = bcm43xx_priv(net_dev); |
| int err = 0; |
| |
| dprintk(KERN_INFO PFX "Resuming...\n"); |
| |
| pci_set_power_state(pdev, 0); |
| err = pci_enable_device(pdev); |
| if (err) { |
| printk(KERN_ERR PFX "Failure with pci_enable_device!\n"); |
| return err; |
| } |
| pci_restore_state(pdev); |
| |
| bcm43xx_chipset_attach(bcm); |
| if (bcm->was_initialized) |
| err = bcm43xx_init_board(bcm); |
| if (err) { |
| printk(KERN_ERR PFX "Resume failed!\n"); |
| return err; |
| } |
| netif_device_attach(net_dev); |
| |
| dprintk(KERN_INFO PFX "Device resumed.\n"); |
| |
| return 0; |
| } |
| |
| #endif /* CONFIG_PM */ |
| |
| static struct pci_driver bcm43xx_pci_driver = { |
| .name = KBUILD_MODNAME, |
| .id_table = bcm43xx_pci_tbl, |
| .probe = bcm43xx_init_one, |
| .remove = __devexit_p(bcm43xx_remove_one), |
| #ifdef CONFIG_PM |
| .suspend = bcm43xx_suspend, |
| .resume = bcm43xx_resume, |
| #endif /* CONFIG_PM */ |
| }; |
| |
| static int __init bcm43xx_init(void) |
| { |
| printk(KERN_INFO KBUILD_MODNAME " driver\n"); |
| bcm43xx_debugfs_init(); |
| return pci_register_driver(&bcm43xx_pci_driver); |
| } |
| |
| static void __exit bcm43xx_exit(void) |
| { |
| pci_unregister_driver(&bcm43xx_pci_driver); |
| bcm43xx_debugfs_exit(); |
| } |
| |
| module_init(bcm43xx_init) |
| module_exit(bcm43xx_exit) |