| /** |
| * This file contains the handling of RX in wlan driver. |
| */ |
| #include <linux/etherdevice.h> |
| #include <linux/types.h> |
| |
| #include "hostcmd.h" |
| #include "radiotap.h" |
| #include "decl.h" |
| #include "dev.h" |
| #include "wext.h" |
| |
| struct eth803hdr { |
| u8 dest_addr[6]; |
| u8 src_addr[6]; |
| u16 h803_len; |
| } __attribute__ ((packed)); |
| |
| struct rfc1042hdr { |
| u8 llc_dsap; |
| u8 llc_ssap; |
| u8 llc_ctrl; |
| u8 snap_oui[3]; |
| u16 snap_type; |
| } __attribute__ ((packed)); |
| |
| struct rxpackethdr { |
| struct rxpd rx_pd; |
| struct eth803hdr eth803_hdr; |
| struct rfc1042hdr rfc1042_hdr; |
| } __attribute__ ((packed)); |
| |
| struct rx80211packethdr { |
| struct rxpd rx_pd; |
| void *eth80211_hdr; |
| } __attribute__ ((packed)); |
| |
| static int process_rxed_802_11_packet(struct lbs_private *priv, |
| struct sk_buff *skb); |
| |
| /** |
| * @brief This function computes the avgSNR . |
| * |
| * @param priv A pointer to struct lbs_private structure |
| * @return avgSNR |
| */ |
| static u8 lbs_getavgsnr(struct lbs_private *priv) |
| { |
| u8 i; |
| u16 temp = 0; |
| if (priv->numSNRNF == 0) |
| return 0; |
| for (i = 0; i < priv->numSNRNF; i++) |
| temp += priv->rawSNR[i]; |
| return (u8) (temp / priv->numSNRNF); |
| |
| } |
| |
| /** |
| * @brief This function computes the AvgNF |
| * |
| * @param priv A pointer to struct lbs_private structure |
| * @return AvgNF |
| */ |
| static u8 lbs_getavgnf(struct lbs_private *priv) |
| { |
| u8 i; |
| u16 temp = 0; |
| if (priv->numSNRNF == 0) |
| return 0; |
| for (i = 0; i < priv->numSNRNF; i++) |
| temp += priv->rawNF[i]; |
| return (u8) (temp / priv->numSNRNF); |
| |
| } |
| |
| /** |
| * @brief This function save the raw SNR/NF to our internel buffer |
| * |
| * @param priv A pointer to struct lbs_private structure |
| * @param prxpd A pointer to rxpd structure of received packet |
| * @return n/a |
| */ |
| static void lbs_save_rawSNRNF(struct lbs_private *priv, struct rxpd *p_rx_pd) |
| { |
| if (priv->numSNRNF < DEFAULT_DATA_AVG_FACTOR) |
| priv->numSNRNF++; |
| priv->rawSNR[priv->nextSNRNF] = p_rx_pd->snr; |
| priv->rawNF[priv->nextSNRNF] = p_rx_pd->nf; |
| priv->nextSNRNF++; |
| if (priv->nextSNRNF >= DEFAULT_DATA_AVG_FACTOR) |
| priv->nextSNRNF = 0; |
| return; |
| } |
| |
| /** |
| * @brief This function computes the RSSI in received packet. |
| * |
| * @param priv A pointer to struct lbs_private structure |
| * @param prxpd A pointer to rxpd structure of received packet |
| * @return n/a |
| */ |
| static void lbs_compute_rssi(struct lbs_private *priv, struct rxpd *p_rx_pd) |
| { |
| |
| lbs_deb_enter(LBS_DEB_RX); |
| |
| lbs_deb_rx("rxpd: SNR %d, NF %d\n", p_rx_pd->snr, p_rx_pd->nf); |
| lbs_deb_rx("before computing SNR: SNR-avg = %d, NF-avg = %d\n", |
| priv->SNR[TYPE_RXPD][TYPE_AVG] / AVG_SCALE, |
| priv->NF[TYPE_RXPD][TYPE_AVG] / AVG_SCALE); |
| |
| priv->SNR[TYPE_RXPD][TYPE_NOAVG] = p_rx_pd->snr; |
| priv->NF[TYPE_RXPD][TYPE_NOAVG] = p_rx_pd->nf; |
| lbs_save_rawSNRNF(priv, p_rx_pd); |
| |
| priv->SNR[TYPE_RXPD][TYPE_AVG] = lbs_getavgsnr(priv) * AVG_SCALE; |
| priv->NF[TYPE_RXPD][TYPE_AVG] = lbs_getavgnf(priv) * AVG_SCALE; |
| lbs_deb_rx("after computing SNR: SNR-avg = %d, NF-avg = %d\n", |
| priv->SNR[TYPE_RXPD][TYPE_AVG] / AVG_SCALE, |
| priv->NF[TYPE_RXPD][TYPE_AVG] / AVG_SCALE); |
| |
| priv->RSSI[TYPE_RXPD][TYPE_NOAVG] = |
| CAL_RSSI(priv->SNR[TYPE_RXPD][TYPE_NOAVG], |
| priv->NF[TYPE_RXPD][TYPE_NOAVG]); |
| |
| priv->RSSI[TYPE_RXPD][TYPE_AVG] = |
| CAL_RSSI(priv->SNR[TYPE_RXPD][TYPE_AVG] / AVG_SCALE, |
| priv->NF[TYPE_RXPD][TYPE_AVG] / AVG_SCALE); |
| |
| lbs_deb_leave(LBS_DEB_RX); |
| } |
| |
| /** |
| * @brief This function processes received packet and forwards it |
| * to kernel/upper layer |
| * |
| * @param priv A pointer to struct lbs_private |
| * @param skb A pointer to skb which includes the received packet |
| * @return 0 or -1 |
| */ |
| int lbs_process_rxed_packet(struct lbs_private *priv, struct sk_buff *skb) |
| { |
| int ret = 0; |
| struct net_device *dev = priv->dev; |
| struct rxpackethdr *p_rx_pkt; |
| struct rxpd *p_rx_pd; |
| int hdrchop; |
| struct ethhdr *p_ethhdr; |
| const u8 rfc1042_eth_hdr[] = { 0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00 }; |
| |
| lbs_deb_enter(LBS_DEB_RX); |
| |
| BUG_ON(!skb); |
| |
| skb->ip_summed = CHECKSUM_NONE; |
| |
| if (priv->monitormode) |
| return process_rxed_802_11_packet(priv, skb); |
| |
| p_rx_pkt = (struct rxpackethdr *) skb->data; |
| p_rx_pd = &p_rx_pkt->rx_pd; |
| if (priv->mesh_dev && (p_rx_pd->rx_control & RxPD_MESH_FRAME)) |
| dev = priv->mesh_dev; |
| |
| lbs_deb_hex(LBS_DEB_RX, "RX Data: Before chop rxpd", skb->data, |
| min_t(unsigned int, skb->len, 100)); |
| |
| if (skb->len < (ETH_HLEN + 8 + sizeof(struct rxpd))) { |
| lbs_deb_rx("rx err: frame received with bad length\n"); |
| priv->stats.rx_length_errors++; |
| ret = 0; |
| goto done; |
| } |
| |
| /* |
| * Check rxpd status and update 802.3 stat, |
| */ |
| if (!(p_rx_pd->status & cpu_to_le16(MRVDRV_RXPD_STATUS_OK))) { |
| lbs_deb_rx("rx err: frame received with bad status\n"); |
| lbs_pr_alert("rxpd not ok\n"); |
| priv->stats.rx_errors++; |
| ret = 0; |
| goto done; |
| } |
| |
| lbs_deb_rx("rx data: skb->len-sizeof(RxPd) = %d-%zd = %zd\n", |
| skb->len, sizeof(struct rxpd), skb->len - sizeof(struct rxpd)); |
| |
| lbs_deb_hex(LBS_DEB_RX, "RX Data: Dest", p_rx_pkt->eth803_hdr.dest_addr, |
| sizeof(p_rx_pkt->eth803_hdr.dest_addr)); |
| lbs_deb_hex(LBS_DEB_RX, "RX Data: Src", p_rx_pkt->eth803_hdr.src_addr, |
| sizeof(p_rx_pkt->eth803_hdr.src_addr)); |
| |
| if (memcmp(&p_rx_pkt->rfc1042_hdr, |
| rfc1042_eth_hdr, sizeof(rfc1042_eth_hdr)) == 0) { |
| /* |
| * Replace the 803 header and rfc1042 header (llc/snap) with an |
| * EthernetII header, keep the src/dst and snap_type (ethertype) |
| * |
| * The firmware only passes up SNAP frames converting |
| * all RX Data from 802.11 to 802.2/LLC/SNAP frames. |
| * |
| * To create the Ethernet II, just move the src, dst address right |
| * before the snap_type. |
| */ |
| p_ethhdr = (struct ethhdr *) |
| ((u8 *) & p_rx_pkt->eth803_hdr |
| + sizeof(p_rx_pkt->eth803_hdr) + sizeof(p_rx_pkt->rfc1042_hdr) |
| - sizeof(p_rx_pkt->eth803_hdr.dest_addr) |
| - sizeof(p_rx_pkt->eth803_hdr.src_addr) |
| - sizeof(p_rx_pkt->rfc1042_hdr.snap_type)); |
| |
| memcpy(p_ethhdr->h_source, p_rx_pkt->eth803_hdr.src_addr, |
| sizeof(p_ethhdr->h_source)); |
| memcpy(p_ethhdr->h_dest, p_rx_pkt->eth803_hdr.dest_addr, |
| sizeof(p_ethhdr->h_dest)); |
| |
| /* Chop off the rxpd + the excess memory from the 802.2/llc/snap header |
| * that was removed |
| */ |
| hdrchop = (u8 *) p_ethhdr - (u8 *) p_rx_pkt; |
| } else { |
| lbs_deb_hex(LBS_DEB_RX, "RX Data: LLC/SNAP", |
| (u8 *) & p_rx_pkt->rfc1042_hdr, |
| sizeof(p_rx_pkt->rfc1042_hdr)); |
| |
| /* Chop off the rxpd */ |
| hdrchop = (u8 *) & p_rx_pkt->eth803_hdr - (u8 *) p_rx_pkt; |
| } |
| |
| /* Chop off the leading header bytes so the skb points to the start of |
| * either the reconstructed EthII frame or the 802.2/llc/snap frame |
| */ |
| skb_pull(skb, hdrchop); |
| |
| /* Take the data rate from the rxpd structure |
| * only if the rate is auto |
| */ |
| if (priv->enablehwauto) |
| priv->cur_rate = lbs_fw_index_to_data_rate(p_rx_pd->rx_rate); |
| |
| lbs_compute_rssi(priv, p_rx_pd); |
| |
| lbs_deb_rx("rx data: size of actual packet %d\n", skb->len); |
| priv->stats.rx_bytes += skb->len; |
| priv->stats.rx_packets++; |
| |
| skb->protocol = eth_type_trans(skb, dev); |
| if (in_interrupt()) |
| netif_rx(skb); |
| else |
| netif_rx_ni(skb); |
| |
| ret = 0; |
| done: |
| lbs_deb_leave_args(LBS_DEB_RX, "ret %d", ret); |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(lbs_process_rxed_packet); |
| |
| /** |
| * @brief This function converts Tx/Rx rates from the Marvell WLAN format |
| * (see Table 2 in Section 3.1) to IEEE80211_RADIOTAP_RATE units (500 Kb/s) |
| * |
| * @param rate Input rate |
| * @return Output Rate (0 if invalid) |
| */ |
| static u8 convert_mv_rate_to_radiotap(u8 rate) |
| { |
| switch (rate) { |
| case 0: /* 1 Mbps */ |
| return 2; |
| case 1: /* 2 Mbps */ |
| return 4; |
| case 2: /* 5.5 Mbps */ |
| return 11; |
| case 3: /* 11 Mbps */ |
| return 22; |
| /* case 4: reserved */ |
| case 5: /* 6 Mbps */ |
| return 12; |
| case 6: /* 9 Mbps */ |
| return 18; |
| case 7: /* 12 Mbps */ |
| return 24; |
| case 8: /* 18 Mbps */ |
| return 36; |
| case 9: /* 24 Mbps */ |
| return 48; |
| case 10: /* 36 Mbps */ |
| return 72; |
| case 11: /* 48 Mbps */ |
| return 96; |
| case 12: /* 54 Mbps */ |
| return 108; |
| } |
| lbs_pr_alert("Invalid Marvell WLAN rate %i\n", rate); |
| return 0; |
| } |
| |
| /** |
| * @brief This function processes a received 802.11 packet and forwards it |
| * to kernel/upper layer |
| * |
| * @param priv A pointer to struct lbs_private |
| * @param skb A pointer to skb which includes the received packet |
| * @return 0 or -1 |
| */ |
| static int process_rxed_802_11_packet(struct lbs_private *priv, |
| struct sk_buff *skb) |
| { |
| int ret = 0; |
| |
| struct rx80211packethdr *p_rx_pkt; |
| struct rxpd *prxpd; |
| struct rx_radiotap_hdr radiotap_hdr; |
| struct rx_radiotap_hdr *pradiotap_hdr; |
| |
| lbs_deb_enter(LBS_DEB_RX); |
| |
| p_rx_pkt = (struct rx80211packethdr *) skb->data; |
| prxpd = &p_rx_pkt->rx_pd; |
| |
| // lbs_deb_hex(LBS_DEB_RX, "RX Data: Before chop rxpd", skb->data, min(skb->len, 100)); |
| |
| if (skb->len < (ETH_HLEN + 8 + sizeof(struct rxpd))) { |
| lbs_deb_rx("rx err: frame received with bad length\n"); |
| priv->stats.rx_length_errors++; |
| ret = -EINVAL; |
| kfree_skb(skb); |
| goto done; |
| } |
| |
| /* |
| * Check rxpd status and update 802.3 stat, |
| */ |
| if (!(prxpd->status & cpu_to_le16(MRVDRV_RXPD_STATUS_OK))) { |
| //lbs_deb_rx("rx err: frame received with bad status\n"); |
| priv->stats.rx_errors++; |
| } |
| |
| lbs_deb_rx("rx data: skb->len-sizeof(RxPd) = %d-%zd = %zd\n", |
| skb->len, sizeof(struct rxpd), skb->len - sizeof(struct rxpd)); |
| |
| /* create the exported radio header */ |
| |
| /* radiotap header */ |
| radiotap_hdr.hdr.it_version = 0; |
| /* XXX must check this value for pad */ |
| radiotap_hdr.hdr.it_pad = 0; |
| radiotap_hdr.hdr.it_len = cpu_to_le16 (sizeof(struct rx_radiotap_hdr)); |
| radiotap_hdr.hdr.it_present = cpu_to_le32 (RX_RADIOTAP_PRESENT); |
| /* unknown values */ |
| radiotap_hdr.flags = 0; |
| radiotap_hdr.chan_freq = 0; |
| radiotap_hdr.chan_flags = 0; |
| radiotap_hdr.antenna = 0; |
| /* known values */ |
| radiotap_hdr.rate = convert_mv_rate_to_radiotap(prxpd->rx_rate); |
| /* XXX must check no carryout */ |
| radiotap_hdr.antsignal = prxpd->snr + prxpd->nf; |
| radiotap_hdr.rx_flags = 0; |
| if (!(prxpd->status & cpu_to_le16(MRVDRV_RXPD_STATUS_OK))) |
| radiotap_hdr.rx_flags |= IEEE80211_RADIOTAP_F_RX_BADFCS; |
| //memset(radiotap_hdr.pad, 0x11, IEEE80211_RADIOTAP_HDRLEN - 18); |
| |
| /* chop the rxpd */ |
| skb_pull(skb, sizeof(struct rxpd)); |
| |
| /* add space for the new radio header */ |
| if ((skb_headroom(skb) < sizeof(struct rx_radiotap_hdr)) && |
| pskb_expand_head(skb, sizeof(struct rx_radiotap_hdr), 0, GFP_ATOMIC)) { |
| lbs_pr_alert("%s: couldn't pskb_expand_head\n", __func__); |
| ret = -ENOMEM; |
| kfree_skb(skb); |
| goto done; |
| } |
| |
| pradiotap_hdr = (void *)skb_push(skb, sizeof(struct rx_radiotap_hdr)); |
| memcpy(pradiotap_hdr, &radiotap_hdr, sizeof(struct rx_radiotap_hdr)); |
| |
| /* Take the data rate from the rxpd structure |
| * only if the rate is auto |
| */ |
| if (priv->enablehwauto) |
| priv->cur_rate = lbs_fw_index_to_data_rate(prxpd->rx_rate); |
| |
| lbs_compute_rssi(priv, prxpd); |
| |
| lbs_deb_rx("rx data: size of actual packet %d\n", skb->len); |
| priv->stats.rx_bytes += skb->len; |
| priv->stats.rx_packets++; |
| |
| skb->protocol = eth_type_trans(skb, priv->rtap_net_dev); |
| netif_rx(skb); |
| |
| ret = 0; |
| |
| done: |
| lbs_deb_leave_args(LBS_DEB_RX, "ret %d", ret); |
| return ret; |
| } |