| The Definitive KVM (Kernel-based Virtual Machine) API Documentation |
| =================================================================== |
| |
| 1. General description |
| |
| The kvm API is a set of ioctls that are issued to control various aspects |
| of a virtual machine. The ioctls belong to three classes |
| |
| - System ioctls: These query and set global attributes which affect the |
| whole kvm subsystem. In addition a system ioctl is used to create |
| virtual machines |
| |
| - VM ioctls: These query and set attributes that affect an entire virtual |
| machine, for example memory layout. In addition a VM ioctl is used to |
| create virtual cpus (vcpus). |
| |
| Only run VM ioctls from the same process (address space) that was used |
| to create the VM. |
| |
| - vcpu ioctls: These query and set attributes that control the operation |
| of a single virtual cpu. |
| |
| Only run vcpu ioctls from the same thread that was used to create the |
| vcpu. |
| |
| 2. File descritpors |
| |
| The kvm API is centered around file descriptors. An initial |
| open("/dev/kvm") obtains a handle to the kvm subsystem; this handle |
| can be used to issue system ioctls. A KVM_CREATE_VM ioctl on this |
| handle will create a VM file descripror which can be used to issue VM |
| ioctls. A KVM_CREATE_VCPU ioctl on a VM fd will create a virtual cpu |
| and return a file descriptor pointing to it. Finally, ioctls on a vcpu |
| fd can be used to control the vcpu, including the important task of |
| actually running guest code. |
| |
| In general file descriptors can be migrated among processes by means |
| of fork() and the SCM_RIGHTS facility of unix domain socket. These |
| kinds of tricks are explicitly not supported by kvm. While they will |
| not cause harm to the host, their actual behavior is not guaranteed by |
| the API. The only supported use is one virtual machine per process, |
| and one vcpu per thread. |
| |
| 3. Extensions |
| |
| As of Linux 2.6.22, the KVM ABI has been stabilized: no backward |
| incompatible change are allowed. However, there is an extension |
| facility that allows backward-compatible extensions to the API to be |
| queried and used. |
| |
| The extension mechanism is not based on on the Linux version number. |
| Instead, kvm defines extension identifiers and a facility to query |
| whether a particular extension identifier is available. If it is, a |
| set of ioctls is available for application use. |
| |
| 4. API description |
| |
| This section describes ioctls that can be used to control kvm guests. |
| For each ioctl, the following information is provided along with a |
| description: |
| |
| Capability: which KVM extension provides this ioctl. Can be 'basic', |
| which means that is will be provided by any kernel that supports |
| API version 12 (see section 4.1), or a KVM_CAP_xyz constant, which |
| means availability needs to be checked with KVM_CHECK_EXTENSION |
| (see section 4.4). |
| |
| Architectures: which instruction set architectures provide this ioctl. |
| x86 includes both i386 and x86_64. |
| |
| Type: system, vm, or vcpu. |
| |
| Parameters: what parameters are accepted by the ioctl. |
| |
| Returns: the return value. General error numbers (EBADF, ENOMEM, EINVAL) |
| are not detailed, but errors with specific meanings are. |
| |
| 4.1 KVM_GET_API_VERSION |
| |
| Capability: basic |
| Architectures: all |
| Type: system ioctl |
| Parameters: none |
| Returns: the constant KVM_API_VERSION (=12) |
| |
| This identifies the API version as the stable kvm API. It is not |
| expected that this number will change. However, Linux 2.6.20 and |
| 2.6.21 report earlier versions; these are not documented and not |
| supported. Applications should refuse to run if KVM_GET_API_VERSION |
| returns a value other than 12. If this check passes, all ioctls |
| described as 'basic' will be available. |
| |
| 4.2 KVM_CREATE_VM |
| |
| Capability: basic |
| Architectures: all |
| Type: system ioctl |
| Parameters: none |
| Returns: a VM fd that can be used to control the new virtual machine. |
| |
| The new VM has no virtual cpus and no memory. An mmap() of a VM fd |
| will access the virtual machine's physical address space; offset zero |
| corresponds to guest physical address zero. Use of mmap() on a VM fd |
| is discouraged if userspace memory allocation (KVM_CAP_USER_MEMORY) is |
| available. |
| |
| 4.3 KVM_GET_MSR_INDEX_LIST |
| |
| Capability: basic |
| Architectures: x86 |
| Type: system |
| Parameters: struct kvm_msr_list (in/out) |
| Returns: 0 on success; -1 on error |
| Errors: |
| E2BIG: the msr index list is to be to fit in the array specified by |
| the user. |
| |
| struct kvm_msr_list { |
| __u32 nmsrs; /* number of msrs in entries */ |
| __u32 indices[0]; |
| }; |
| |
| This ioctl returns the guest msrs that are supported. The list varies |
| by kvm version and host processor, but does not change otherwise. The |
| user fills in the size of the indices array in nmsrs, and in return |
| kvm adjusts nmsrs to reflect the actual number of msrs and fills in |
| the indices array with their numbers. |
| |
| 4.4 KVM_CHECK_EXTENSION |
| |
| Capability: basic |
| Architectures: all |
| Type: system ioctl |
| Parameters: extension identifier (KVM_CAP_*) |
| Returns: 0 if unsupported; 1 (or some other positive integer) if supported |
| |
| The API allows the application to query about extensions to the core |
| kvm API. Userspace passes an extension identifier (an integer) and |
| receives an integer that describes the extension availability. |
| Generally 0 means no and 1 means yes, but some extensions may report |
| additional information in the integer return value. |
| |
| 4.5 KVM_GET_VCPU_MMAP_SIZE |
| |
| Capability: basic |
| Architectures: all |
| Type: system ioctl |
| Parameters: none |
| Returns: size of vcpu mmap area, in bytes |
| |
| The KVM_RUN ioctl (cf.) communicates with userspace via a shared |
| memory region. This ioctl returns the size of that region. See the |
| KVM_RUN documentation for details. |
| |
| 4.6 KVM_SET_MEMORY_REGION |
| |
| Capability: basic |
| Architectures: all |
| Type: vm ioctl |
| Parameters: struct kvm_memory_region (in) |
| Returns: 0 on success, -1 on error |
| |
| struct kvm_memory_region { |
| __u32 slot; |
| __u32 flags; |
| __u64 guest_phys_addr; |
| __u64 memory_size; /* bytes */ |
| }; |
| |
| /* for kvm_memory_region::flags */ |
| #define KVM_MEM_LOG_DIRTY_PAGES 1UL |
| |
| This ioctl allows the user to create or modify a guest physical memory |
| slot. When changing an existing slot, it may be moved in the guest |
| physical memory space, or its flags may be modified. It may not be |
| resized. Slots may not overlap. |
| |
| The flags field supports just one flag, KVM_MEM_LOG_DIRTY_PAGES, which |
| instructs kvm to keep track of writes to memory within the slot. See |
| the KVM_GET_DIRTY_LOG ioctl. |
| |
| It is recommended to use the KVM_SET_USER_MEMORY_REGION ioctl instead |
| of this API, if available. This newer API allows placing guest memory |
| at specified locations in the host address space, yielding better |
| control and easy access. |
| |
| 4.6 KVM_CREATE_VCPU |
| |
| Capability: basic |
| Architectures: all |
| Type: vm ioctl |
| Parameters: vcpu id (apic id on x86) |
| Returns: vcpu fd on success, -1 on error |
| |
| This API adds a vcpu to a virtual machine. The vcpu id is a small integer |
| in the range [0, max_vcpus). |
| |
| 4.7 KVM_GET_DIRTY_LOG (vm ioctl) |
| |
| Capability: basic |
| Architectures: x86 |
| Type: vm ioctl |
| Parameters: struct kvm_dirty_log (in/out) |
| Returns: 0 on success, -1 on error |
| |
| /* for KVM_GET_DIRTY_LOG */ |
| struct kvm_dirty_log { |
| __u32 slot; |
| __u32 padding; |
| union { |
| void __user *dirty_bitmap; /* one bit per page */ |
| __u64 padding; |
| }; |
| }; |
| |
| Given a memory slot, return a bitmap containing any pages dirtied |
| since the last call to this ioctl. Bit 0 is the first page in the |
| memory slot. Ensure the entire structure is cleared to avoid padding |
| issues. |
| |
| 4.8 KVM_SET_MEMORY_ALIAS |
| |
| Capability: basic |
| Architectures: x86 |
| Type: vm ioctl |
| Parameters: struct kvm_memory_alias (in) |
| Returns: 0 (success), -1 (error) |
| |
| struct kvm_memory_alias { |
| __u32 slot; /* this has a different namespace than memory slots */ |
| __u32 flags; |
| __u64 guest_phys_addr; |
| __u64 memory_size; |
| __u64 target_phys_addr; |
| }; |
| |
| Defines a guest physical address space region as an alias to another |
| region. Useful for aliased address, for example the VGA low memory |
| window. Should not be used with userspace memory. |
| |
| 4.9 KVM_RUN |
| |
| Capability: basic |
| Architectures: all |
| Type: vcpu ioctl |
| Parameters: none |
| Returns: 0 on success, -1 on error |
| Errors: |
| EINTR: an unmasked signal is pending |
| |
| This ioctl is used to run a guest virtual cpu. While there are no |
| explicit parameters, there is an implicit parameter block that can be |
| obtained by mmap()ing the vcpu fd at offset 0, with the size given by |
| KVM_GET_VCPU_MMAP_SIZE. The parameter block is formatted as a 'struct |
| kvm_run' (see below). |
| |
| 4.10 KVM_GET_REGS |
| |
| Capability: basic |
| Architectures: all |
| Type: vcpu ioctl |
| Parameters: struct kvm_regs (out) |
| Returns: 0 on success, -1 on error |
| |
| Reads the general purpose registers from the vcpu. |
| |
| /* x86 */ |
| struct kvm_regs { |
| /* out (KVM_GET_REGS) / in (KVM_SET_REGS) */ |
| __u64 rax, rbx, rcx, rdx; |
| __u64 rsi, rdi, rsp, rbp; |
| __u64 r8, r9, r10, r11; |
| __u64 r12, r13, r14, r15; |
| __u64 rip, rflags; |
| }; |
| |
| 4.11 KVM_SET_REGS |
| |
| Capability: basic |
| Architectures: all |
| Type: vcpu ioctl |
| Parameters: struct kvm_regs (in) |
| Returns: 0 on success, -1 on error |
| |
| Writes the general purpose registers into the vcpu. |
| |
| See KVM_GET_REGS for the data structure. |
| |
| 4.12 KVM_GET_SREGS |
| |
| Capability: basic |
| Architectures: x86 |
| Type: vcpu ioctl |
| Parameters: struct kvm_sregs (out) |
| Returns: 0 on success, -1 on error |
| |
| Reads special registers from the vcpu. |
| |
| /* x86 */ |
| struct kvm_sregs { |
| struct kvm_segment cs, ds, es, fs, gs, ss; |
| struct kvm_segment tr, ldt; |
| struct kvm_dtable gdt, idt; |
| __u64 cr0, cr2, cr3, cr4, cr8; |
| __u64 efer; |
| __u64 apic_base; |
| __u64 interrupt_bitmap[(KVM_NR_INTERRUPTS + 63) / 64]; |
| }; |
| |
| interrupt_bitmap is a bitmap of pending external interrupts. At most |
| one bit may be set. This interrupt has been acknowledged by the APIC |
| but not yet injected into the cpu core. |
| |
| 4.13 KVM_SET_SREGS |
| |
| Capability: basic |
| Architectures: x86 |
| Type: vcpu ioctl |
| Parameters: struct kvm_sregs (in) |
| Returns: 0 on success, -1 on error |
| |
| Writes special registers into the vcpu. See KVM_GET_SREGS for the |
| data structures. |
| |
| 4.14 KVM_TRANSLATE |
| |
| Capability: basic |
| Architectures: x86 |
| Type: vcpu ioctl |
| Parameters: struct kvm_translation (in/out) |
| Returns: 0 on success, -1 on error |
| |
| Translates a virtual address according to the vcpu's current address |
| translation mode. |
| |
| struct kvm_translation { |
| /* in */ |
| __u64 linear_address; |
| |
| /* out */ |
| __u64 physical_address; |
| __u8 valid; |
| __u8 writeable; |
| __u8 usermode; |
| __u8 pad[5]; |
| }; |
| |
| 4.15 KVM_INTERRUPT |
| |
| Capability: basic |
| Architectures: x86 |
| Type: vcpu ioctl |
| Parameters: struct kvm_interrupt (in) |
| Returns: 0 on success, -1 on error |
| |
| Queues a hardware interrupt vector to be injected. This is only |
| useful if in-kernel local APIC is not used. |
| |
| /* for KVM_INTERRUPT */ |
| struct kvm_interrupt { |
| /* in */ |
| __u32 irq; |
| }; |
| |
| Note 'irq' is an interrupt vector, not an interrupt pin or line. |
| |
| 4.16 KVM_DEBUG_GUEST |
| |
| Capability: basic |
| Architectures: none |
| Type: vcpu ioctl |
| Parameters: none) |
| Returns: -1 on error |
| |
| Support for this has been removed. Use KVM_SET_GUEST_DEBUG instead. |
| |
| 4.17 KVM_GET_MSRS |
| |
| Capability: basic |
| Architectures: x86 |
| Type: vcpu ioctl |
| Parameters: struct kvm_msrs (in/out) |
| Returns: 0 on success, -1 on error |
| |
| Reads model-specific registers from the vcpu. Supported msr indices can |
| be obtained using KVM_GET_MSR_INDEX_LIST. |
| |
| struct kvm_msrs { |
| __u32 nmsrs; /* number of msrs in entries */ |
| __u32 pad; |
| |
| struct kvm_msr_entry entries[0]; |
| }; |
| |
| struct kvm_msr_entry { |
| __u32 index; |
| __u32 reserved; |
| __u64 data; |
| }; |
| |
| Application code should set the 'nmsrs' member (which indicates the |
| size of the entries array) and the 'index' member of each array entry. |
| kvm will fill in the 'data' member. |
| |
| 4.18 KVM_SET_MSRS |
| |
| Capability: basic |
| Architectures: x86 |
| Type: vcpu ioctl |
| Parameters: struct kvm_msrs (in) |
| Returns: 0 on success, -1 on error |
| |
| Writes model-specific registers to the vcpu. See KVM_GET_MSRS for the |
| data structures. |
| |
| Application code should set the 'nmsrs' member (which indicates the |
| size of the entries array), and the 'index' and 'data' members of each |
| array entry. |
| |
| 4.19 KVM_SET_CPUID |
| |
| Capability: basic |
| Architectures: x86 |
| Type: vcpu ioctl |
| Parameters: struct kvm_cpuid (in) |
| Returns: 0 on success, -1 on error |
| |
| Defines the vcpu responses to the cpuid instruction. Applications |
| should use the KVM_SET_CPUID2 ioctl if available. |
| |
| |
| struct kvm_cpuid_entry { |
| __u32 function; |
| __u32 eax; |
| __u32 ebx; |
| __u32 ecx; |
| __u32 edx; |
| __u32 padding; |
| }; |
| |
| /* for KVM_SET_CPUID */ |
| struct kvm_cpuid { |
| __u32 nent; |
| __u32 padding; |
| struct kvm_cpuid_entry entries[0]; |
| }; |
| |
| 4.20 KVM_SET_SIGNAL_MASK |
| |
| Capability: basic |
| Architectures: x86 |
| Type: vcpu ioctl |
| Parameters: struct kvm_signal_mask (in) |
| Returns: 0 on success, -1 on error |
| |
| Defines which signals are blocked during execution of KVM_RUN. This |
| signal mask temporarily overrides the threads signal mask. Any |
| unblocked signal received (except SIGKILL and SIGSTOP, which retain |
| their traditional behaviour) will cause KVM_RUN to return with -EINTR. |
| |
| Note the signal will only be delivered if not blocked by the original |
| signal mask. |
| |
| /* for KVM_SET_SIGNAL_MASK */ |
| struct kvm_signal_mask { |
| __u32 len; |
| __u8 sigset[0]; |
| }; |
| |
| 4.21 KVM_GET_FPU |
| |
| Capability: basic |
| Architectures: x86 |
| Type: vcpu ioctl |
| Parameters: struct kvm_fpu (out) |
| Returns: 0 on success, -1 on error |
| |
| Reads the floating point state from the vcpu. |
| |
| /* for KVM_GET_FPU and KVM_SET_FPU */ |
| struct kvm_fpu { |
| __u8 fpr[8][16]; |
| __u16 fcw; |
| __u16 fsw; |
| __u8 ftwx; /* in fxsave format */ |
| __u8 pad1; |
| __u16 last_opcode; |
| __u64 last_ip; |
| __u64 last_dp; |
| __u8 xmm[16][16]; |
| __u32 mxcsr; |
| __u32 pad2; |
| }; |
| |
| 4.22 KVM_SET_FPU |
| |
| Capability: basic |
| Architectures: x86 |
| Type: vcpu ioctl |
| Parameters: struct kvm_fpu (in) |
| Returns: 0 on success, -1 on error |
| |
| Writes the floating point state to the vcpu. |
| |
| /* for KVM_GET_FPU and KVM_SET_FPU */ |
| struct kvm_fpu { |
| __u8 fpr[8][16]; |
| __u16 fcw; |
| __u16 fsw; |
| __u8 ftwx; /* in fxsave format */ |
| __u8 pad1; |
| __u16 last_opcode; |
| __u64 last_ip; |
| __u64 last_dp; |
| __u8 xmm[16][16]; |
| __u32 mxcsr; |
| __u32 pad2; |
| }; |
| |
| 4.23 KVM_CREATE_IRQCHIP |
| |
| Capability: KVM_CAP_IRQCHIP |
| Architectures: x86, ia64 |
| Type: vm ioctl |
| Parameters: none |
| Returns: 0 on success, -1 on error |
| |
| Creates an interrupt controller model in the kernel. On x86, creates a virtual |
| ioapic, a virtual PIC (two PICs, nested), and sets up future vcpus to have a |
| local APIC. IRQ routing for GSIs 0-15 is set to both PIC and IOAPIC; GSI 16-23 |
| only go to the IOAPIC. On ia64, a IOSAPIC is created. |
| |
| 4.24 KVM_IRQ_LINE |
| |
| Capability: KVM_CAP_IRQCHIP |
| Architectures: x86, ia64 |
| Type: vm ioctl |
| Parameters: struct kvm_irq_level |
| Returns: 0 on success, -1 on error |
| |
| Sets the level of a GSI input to the interrupt controller model in the kernel. |
| Requires that an interrupt controller model has been previously created with |
| KVM_CREATE_IRQCHIP. Note that edge-triggered interrupts require the level |
| to be set to 1 and then back to 0. |
| |
| struct kvm_irq_level { |
| union { |
| __u32 irq; /* GSI */ |
| __s32 status; /* not used for KVM_IRQ_LEVEL */ |
| }; |
| __u32 level; /* 0 or 1 */ |
| }; |
| |
| 4.25 KVM_GET_IRQCHIP |
| |
| Capability: KVM_CAP_IRQCHIP |
| Architectures: x86, ia64 |
| Type: vm ioctl |
| Parameters: struct kvm_irqchip (in/out) |
| Returns: 0 on success, -1 on error |
| |
| Reads the state of a kernel interrupt controller created with |
| KVM_CREATE_IRQCHIP into a buffer provided by the caller. |
| |
| struct kvm_irqchip { |
| __u32 chip_id; /* 0 = PIC1, 1 = PIC2, 2 = IOAPIC */ |
| __u32 pad; |
| union { |
| char dummy[512]; /* reserving space */ |
| struct kvm_pic_state pic; |
| struct kvm_ioapic_state ioapic; |
| } chip; |
| }; |
| |
| 4.26 KVM_SET_IRQCHIP |
| |
| Capability: KVM_CAP_IRQCHIP |
| Architectures: x86, ia64 |
| Type: vm ioctl |
| Parameters: struct kvm_irqchip (in) |
| Returns: 0 on success, -1 on error |
| |
| Sets the state of a kernel interrupt controller created with |
| KVM_CREATE_IRQCHIP from a buffer provided by the caller. |
| |
| struct kvm_irqchip { |
| __u32 chip_id; /* 0 = PIC1, 1 = PIC2, 2 = IOAPIC */ |
| __u32 pad; |
| union { |
| char dummy[512]; /* reserving space */ |
| struct kvm_pic_state pic; |
| struct kvm_ioapic_state ioapic; |
| } chip; |
| }; |
| |
| 4.27 KVM_XEN_HVM_CONFIG |
| |
| Capability: KVM_CAP_XEN_HVM |
| Architectures: x86 |
| Type: vm ioctl |
| Parameters: struct kvm_xen_hvm_config (in) |
| Returns: 0 on success, -1 on error |
| |
| Sets the MSR that the Xen HVM guest uses to initialize its hypercall |
| page, and provides the starting address and size of the hypercall |
| blobs in userspace. When the guest writes the MSR, kvm copies one |
| page of a blob (32- or 64-bit, depending on the vcpu mode) to guest |
| memory. |
| |
| struct kvm_xen_hvm_config { |
| __u32 flags; |
| __u32 msr; |
| __u64 blob_addr_32; |
| __u64 blob_addr_64; |
| __u8 blob_size_32; |
| __u8 blob_size_64; |
| __u8 pad2[30]; |
| }; |
| |
| 4.27 KVM_GET_CLOCK |
| |
| Capability: KVM_CAP_ADJUST_CLOCK |
| Architectures: x86 |
| Type: vm ioctl |
| Parameters: struct kvm_clock_data (out) |
| Returns: 0 on success, -1 on error |
| |
| Gets the current timestamp of kvmclock as seen by the current guest. In |
| conjunction with KVM_SET_CLOCK, it is used to ensure monotonicity on scenarios |
| such as migration. |
| |
| struct kvm_clock_data { |
| __u64 clock; /* kvmclock current value */ |
| __u32 flags; |
| __u32 pad[9]; |
| }; |
| |
| 4.28 KVM_SET_CLOCK |
| |
| Capability: KVM_CAP_ADJUST_CLOCK |
| Architectures: x86 |
| Type: vm ioctl |
| Parameters: struct kvm_clock_data (in) |
| Returns: 0 on success, -1 on error |
| |
| Sets the current timestamp of kvmclock to the valued specific in its parameter. |
| In conjunction with KVM_GET_CLOCK, it is used to ensure monotonicity on scenarios |
| such as migration. |
| |
| struct kvm_clock_data { |
| __u64 clock; /* kvmclock current value */ |
| __u32 flags; |
| __u32 pad[9]; |
| }; |
| |
| 5. The kvm_run structure |
| |
| Application code obtains a pointer to the kvm_run structure by |
| mmap()ing a vcpu fd. From that point, application code can control |
| execution by changing fields in kvm_run prior to calling the KVM_RUN |
| ioctl, and obtain information about the reason KVM_RUN returned by |
| looking up structure members. |
| |
| struct kvm_run { |
| /* in */ |
| __u8 request_interrupt_window; |
| |
| Request that KVM_RUN return when it becomes possible to inject external |
| interrupts into the guest. Useful in conjunction with KVM_INTERRUPT. |
| |
| __u8 padding1[7]; |
| |
| /* out */ |
| __u32 exit_reason; |
| |
| When KVM_RUN has returned successfully (return value 0), this informs |
| application code why KVM_RUN has returned. Allowable values for this |
| field are detailed below. |
| |
| __u8 ready_for_interrupt_injection; |
| |
| If request_interrupt_window has been specified, this field indicates |
| an interrupt can be injected now with KVM_INTERRUPT. |
| |
| __u8 if_flag; |
| |
| The value of the current interrupt flag. Only valid if in-kernel |
| local APIC is not used. |
| |
| __u8 padding2[2]; |
| |
| /* in (pre_kvm_run), out (post_kvm_run) */ |
| __u64 cr8; |
| |
| The value of the cr8 register. Only valid if in-kernel local APIC is |
| not used. Both input and output. |
| |
| __u64 apic_base; |
| |
| The value of the APIC BASE msr. Only valid if in-kernel local |
| APIC is not used. Both input and output. |
| |
| union { |
| /* KVM_EXIT_UNKNOWN */ |
| struct { |
| __u64 hardware_exit_reason; |
| } hw; |
| |
| If exit_reason is KVM_EXIT_UNKNOWN, the vcpu has exited due to unknown |
| reasons. Further architecture-specific information is available in |
| hardware_exit_reason. |
| |
| /* KVM_EXIT_FAIL_ENTRY */ |
| struct { |
| __u64 hardware_entry_failure_reason; |
| } fail_entry; |
| |
| If exit_reason is KVM_EXIT_FAIL_ENTRY, the vcpu could not be run due |
| to unknown reasons. Further architecture-specific information is |
| available in hardware_entry_failure_reason. |
| |
| /* KVM_EXIT_EXCEPTION */ |
| struct { |
| __u32 exception; |
| __u32 error_code; |
| } ex; |
| |
| Unused. |
| |
| /* KVM_EXIT_IO */ |
| struct { |
| #define KVM_EXIT_IO_IN 0 |
| #define KVM_EXIT_IO_OUT 1 |
| __u8 direction; |
| __u8 size; /* bytes */ |
| __u16 port; |
| __u32 count; |
| __u64 data_offset; /* relative to kvm_run start */ |
| } io; |
| |
| If exit_reason is KVM_EXIT_IO_IN or KVM_EXIT_IO_OUT, then the vcpu has |
| executed a port I/O instruction which could not be satisfied by kvm. |
| data_offset describes where the data is located (KVM_EXIT_IO_OUT) or |
| where kvm expects application code to place the data for the next |
| KVM_RUN invocation (KVM_EXIT_IO_IN). Data format is a patcked array. |
| |
| struct { |
| struct kvm_debug_exit_arch arch; |
| } debug; |
| |
| Unused. |
| |
| /* KVM_EXIT_MMIO */ |
| struct { |
| __u64 phys_addr; |
| __u8 data[8]; |
| __u32 len; |
| __u8 is_write; |
| } mmio; |
| |
| If exit_reason is KVM_EXIT_MMIO or KVM_EXIT_IO_OUT, then the vcpu has |
| executed a memory-mapped I/O instruction which could not be satisfied |
| by kvm. The 'data' member contains the written data if 'is_write' is |
| true, and should be filled by application code otherwise. |
| |
| /* KVM_EXIT_HYPERCALL */ |
| struct { |
| __u64 nr; |
| __u64 args[6]; |
| __u64 ret; |
| __u32 longmode; |
| __u32 pad; |
| } hypercall; |
| |
| Unused. |
| |
| /* KVM_EXIT_TPR_ACCESS */ |
| struct { |
| __u64 rip; |
| __u32 is_write; |
| __u32 pad; |
| } tpr_access; |
| |
| To be documented (KVM_TPR_ACCESS_REPORTING). |
| |
| /* KVM_EXIT_S390_SIEIC */ |
| struct { |
| __u8 icptcode; |
| __u64 mask; /* psw upper half */ |
| __u64 addr; /* psw lower half */ |
| __u16 ipa; |
| __u32 ipb; |
| } s390_sieic; |
| |
| s390 specific. |
| |
| /* KVM_EXIT_S390_RESET */ |
| #define KVM_S390_RESET_POR 1 |
| #define KVM_S390_RESET_CLEAR 2 |
| #define KVM_S390_RESET_SUBSYSTEM 4 |
| #define KVM_S390_RESET_CPU_INIT 8 |
| #define KVM_S390_RESET_IPL 16 |
| __u64 s390_reset_flags; |
| |
| s390 specific. |
| |
| /* KVM_EXIT_DCR */ |
| struct { |
| __u32 dcrn; |
| __u32 data; |
| __u8 is_write; |
| } dcr; |
| |
| powerpc specific. |
| |
| /* Fix the size of the union. */ |
| char padding[256]; |
| }; |
| }; |