| /* |
| * Copyright (c) 2012-2017 Qualcomm Atheros, Inc. |
| * |
| * Permission to use, copy, modify, and/or distribute this software for any |
| * purpose with or without fee is hereby granted, provided that the above |
| * copyright notice and this permission notice appear in all copies. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES |
| * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF |
| * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR |
| * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES |
| * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN |
| * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF |
| * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. |
| */ |
| |
| #include <linux/moduleparam.h> |
| #include <linux/etherdevice.h> |
| #include <linux/if_arp.h> |
| |
| #include "wil6210.h" |
| #include "txrx.h" |
| #include "wmi.h" |
| #include "trace.h" |
| |
| static uint max_assoc_sta = WIL6210_MAX_CID; |
| module_param(max_assoc_sta, uint, 0644); |
| MODULE_PARM_DESC(max_assoc_sta, " Max number of stations associated to the AP"); |
| |
| int agg_wsize; /* = 0; */ |
| module_param(agg_wsize, int, 0644); |
| MODULE_PARM_DESC(agg_wsize, " Window size for Tx Block Ack after connect;" |
| " 0 - use default; < 0 - don't auto-establish"); |
| |
| u8 led_id = WIL_LED_INVALID_ID; |
| module_param(led_id, byte, 0444); |
| MODULE_PARM_DESC(led_id, |
| " 60G device led enablement. Set the led ID (0-2) to enable"); |
| |
| #define WIL_WAIT_FOR_SUSPEND_RESUME_COMP 200 |
| |
| /** |
| * WMI event receiving - theory of operations |
| * |
| * When firmware about to report WMI event, it fills memory area |
| * in the mailbox and raises misc. IRQ. Thread interrupt handler invoked for |
| * the misc IRQ, function @wmi_recv_cmd called by thread IRQ handler. |
| * |
| * @wmi_recv_cmd reads event, allocates memory chunk and attaches it to the |
| * event list @wil->pending_wmi_ev. Then, work queue @wil->wmi_wq wakes up |
| * and handles events within the @wmi_event_worker. Every event get detached |
| * from list, processed and deleted. |
| * |
| * Purpose for this mechanism is to release IRQ thread; otherwise, |
| * if WMI event handling involves another WMI command flow, this 2-nd flow |
| * won't be completed because of blocked IRQ thread. |
| */ |
| |
| /** |
| * Addressing - theory of operations |
| * |
| * There are several buses present on the WIL6210 card. |
| * Same memory areas are visible at different address on |
| * the different busses. There are 3 main bus masters: |
| * - MAC CPU (ucode) |
| * - User CPU (firmware) |
| * - AHB (host) |
| * |
| * On the PCI bus, there is one BAR (BAR0) of 2Mb size, exposing |
| * AHB addresses starting from 0x880000 |
| * |
| * Internally, firmware uses addresses that allows faster access but |
| * are invisible from the host. To read from these addresses, alternative |
| * AHB address must be used. |
| * |
| * Memory mapping |
| * Linker address PCI/Host address |
| * 0x880000 .. 0xa80000 2Mb BAR0 |
| * 0x800000 .. 0x807000 0x900000 .. 0x907000 28k DCCM |
| * 0x840000 .. 0x857000 0x908000 .. 0x91f000 92k PERIPH |
| */ |
| |
| /** |
| * @fw_mapping provides memory remapping table |
| * |
| * array size should be in sync with the declaration in the wil6210.h |
| */ |
| const struct fw_map fw_mapping[] = { |
| /* FW code RAM 256k */ |
| {0x000000, 0x040000, 0x8c0000, "fw_code", true}, |
| /* FW data RAM 32k */ |
| {0x800000, 0x808000, 0x900000, "fw_data", true}, |
| /* periph data 128k */ |
| {0x840000, 0x860000, 0x908000, "fw_peri", true}, |
| /* various RGF 40k */ |
| {0x880000, 0x88a000, 0x880000, "rgf", true}, |
| /* AGC table 4k */ |
| {0x88a000, 0x88b000, 0x88a000, "AGC_tbl", true}, |
| /* Pcie_ext_rgf 4k */ |
| {0x88b000, 0x88c000, 0x88b000, "rgf_ext", true}, |
| /* mac_ext_rgf 512b */ |
| {0x88c000, 0x88c200, 0x88c000, "mac_rgf_ext", true}, |
| /* upper area 548k */ |
| {0x8c0000, 0x949000, 0x8c0000, "upper", true}, |
| /* UCODE areas - accessible by debugfs blobs but not by |
| * wmi_addr_remap. UCODE areas MUST be added AFTER FW areas! |
| */ |
| /* ucode code RAM 128k */ |
| {0x000000, 0x020000, 0x920000, "uc_code", false}, |
| /* ucode data RAM 16k */ |
| {0x800000, 0x804000, 0x940000, "uc_data", false}, |
| }; |
| |
| struct blink_on_off_time led_blink_time[] = { |
| {WIL_LED_BLINK_ON_SLOW_MS, WIL_LED_BLINK_OFF_SLOW_MS}, |
| {WIL_LED_BLINK_ON_MED_MS, WIL_LED_BLINK_OFF_MED_MS}, |
| {WIL_LED_BLINK_ON_FAST_MS, WIL_LED_BLINK_OFF_FAST_MS}, |
| }; |
| |
| u8 led_polarity = LED_POLARITY_LOW_ACTIVE; |
| |
| /** |
| * return AHB address for given firmware internal (linker) address |
| * @x - internal address |
| * If address have no valid AHB mapping, return 0 |
| */ |
| static u32 wmi_addr_remap(u32 x) |
| { |
| uint i; |
| |
| for (i = 0; i < ARRAY_SIZE(fw_mapping); i++) { |
| if (fw_mapping[i].fw && |
| ((x >= fw_mapping[i].from) && (x < fw_mapping[i].to))) |
| return x + fw_mapping[i].host - fw_mapping[i].from; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * Check address validity for WMI buffer; remap if needed |
| * @ptr - internal (linker) fw/ucode address |
| * @size - if non zero, validate the block does not |
| * exceed the device memory (bar) |
| * |
| * Valid buffer should be DWORD aligned |
| * |
| * return address for accessing buffer from the host; |
| * if buffer is not valid, return NULL. |
| */ |
| void __iomem *wmi_buffer_block(struct wil6210_priv *wil, __le32 ptr_, u32 size) |
| { |
| u32 off; |
| u32 ptr = le32_to_cpu(ptr_); |
| |
| if (ptr % 4) |
| return NULL; |
| |
| ptr = wmi_addr_remap(ptr); |
| if (ptr < WIL6210_FW_HOST_OFF) |
| return NULL; |
| |
| off = HOSTADDR(ptr); |
| if (off > wil->bar_size - 4) |
| return NULL; |
| if (size && ((off + size > wil->bar_size) || (off + size < off))) |
| return NULL; |
| |
| return wil->csr + off; |
| } |
| |
| void __iomem *wmi_buffer(struct wil6210_priv *wil, __le32 ptr_) |
| { |
| return wmi_buffer_block(wil, ptr_, 0); |
| } |
| |
| /** |
| * Check address validity |
| */ |
| void __iomem *wmi_addr(struct wil6210_priv *wil, u32 ptr) |
| { |
| u32 off; |
| |
| if (ptr % 4) |
| return NULL; |
| |
| if (ptr < WIL6210_FW_HOST_OFF) |
| return NULL; |
| |
| off = HOSTADDR(ptr); |
| if (off > wil->bar_size - 4) |
| return NULL; |
| |
| return wil->csr + off; |
| } |
| |
| int wmi_read_hdr(struct wil6210_priv *wil, __le32 ptr, |
| struct wil6210_mbox_hdr *hdr) |
| { |
| void __iomem *src = wmi_buffer(wil, ptr); |
| |
| if (!src) |
| return -EINVAL; |
| |
| wil_memcpy_fromio_32(hdr, src, sizeof(*hdr)); |
| |
| return 0; |
| } |
| |
| static int __wmi_send(struct wil6210_priv *wil, u16 cmdid, void *buf, u16 len) |
| { |
| struct { |
| struct wil6210_mbox_hdr hdr; |
| struct wmi_cmd_hdr wmi; |
| } __packed cmd = { |
| .hdr = { |
| .type = WIL_MBOX_HDR_TYPE_WMI, |
| .flags = 0, |
| .len = cpu_to_le16(sizeof(cmd.wmi) + len), |
| }, |
| .wmi = { |
| .mid = 0, |
| .command_id = cpu_to_le16(cmdid), |
| }, |
| }; |
| struct wil6210_mbox_ring *r = &wil->mbox_ctl.tx; |
| struct wil6210_mbox_ring_desc d_head; |
| u32 next_head; |
| void __iomem *dst; |
| void __iomem *head = wmi_addr(wil, r->head); |
| uint retry; |
| int rc = 0; |
| |
| if (len > r->entry_size - sizeof(cmd)) { |
| wil_err(wil, "WMI size too large: %d bytes, max is %d\n", |
| (int)(sizeof(cmd) + len), r->entry_size); |
| return -ERANGE; |
| } |
| |
| might_sleep(); |
| |
| if (!test_bit(wil_status_fwready, wil->status)) { |
| wil_err(wil, "WMI: cannot send command while FW not ready\n"); |
| return -EAGAIN; |
| } |
| |
| /* Allow sending only suspend / resume commands during susepnd flow */ |
| if ((test_bit(wil_status_suspending, wil->status) || |
| test_bit(wil_status_suspended, wil->status) || |
| test_bit(wil_status_resuming, wil->status)) && |
| ((cmdid != WMI_TRAFFIC_SUSPEND_CMDID) && |
| (cmdid != WMI_TRAFFIC_RESUME_CMDID))) { |
| wil_err(wil, "WMI: reject send_command during suspend\n"); |
| return -EINVAL; |
| } |
| |
| if (!head) { |
| wil_err(wil, "WMI head is garbage: 0x%08x\n", r->head); |
| return -EINVAL; |
| } |
| |
| wil_halp_vote(wil); |
| |
| /* read Tx head till it is not busy */ |
| for (retry = 5; retry > 0; retry--) { |
| wil_memcpy_fromio_32(&d_head, head, sizeof(d_head)); |
| if (d_head.sync == 0) |
| break; |
| msleep(20); |
| } |
| if (d_head.sync != 0) { |
| wil_err(wil, "WMI head busy\n"); |
| rc = -EBUSY; |
| goto out; |
| } |
| /* next head */ |
| next_head = r->base + ((r->head - r->base + sizeof(d_head)) % r->size); |
| wil_dbg_wmi(wil, "Head 0x%08x -> 0x%08x\n", r->head, next_head); |
| /* wait till FW finish with previous command */ |
| for (retry = 5; retry > 0; retry--) { |
| if (!test_bit(wil_status_fwready, wil->status)) { |
| wil_err(wil, "WMI: cannot send command while FW not ready\n"); |
| rc = -EAGAIN; |
| goto out; |
| } |
| r->tail = wil_r(wil, RGF_MBOX + |
| offsetof(struct wil6210_mbox_ctl, tx.tail)); |
| if (next_head != r->tail) |
| break; |
| msleep(20); |
| } |
| if (next_head == r->tail) { |
| wil_err(wil, "WMI ring full\n"); |
| rc = -EBUSY; |
| goto out; |
| } |
| dst = wmi_buffer(wil, d_head.addr); |
| if (!dst) { |
| wil_err(wil, "invalid WMI buffer: 0x%08x\n", |
| le32_to_cpu(d_head.addr)); |
| rc = -EAGAIN; |
| goto out; |
| } |
| cmd.hdr.seq = cpu_to_le16(++wil->wmi_seq); |
| /* set command */ |
| wil_dbg_wmi(wil, "WMI command 0x%04x [%d]\n", cmdid, len); |
| wil_hex_dump_wmi("Cmd ", DUMP_PREFIX_OFFSET, 16, 1, &cmd, |
| sizeof(cmd), true); |
| wil_hex_dump_wmi("cmd ", DUMP_PREFIX_OFFSET, 16, 1, buf, |
| len, true); |
| wil_memcpy_toio_32(dst, &cmd, sizeof(cmd)); |
| wil_memcpy_toio_32(dst + sizeof(cmd), buf, len); |
| /* mark entry as full */ |
| wil_w(wil, r->head + offsetof(struct wil6210_mbox_ring_desc, sync), 1); |
| /* advance next ptr */ |
| wil_w(wil, RGF_MBOX + offsetof(struct wil6210_mbox_ctl, tx.head), |
| r->head = next_head); |
| |
| trace_wil6210_wmi_cmd(&cmd.wmi, buf, len); |
| |
| /* interrupt to FW */ |
| wil_w(wil, RGF_USER_USER_ICR + offsetof(struct RGF_ICR, ICS), |
| SW_INT_MBOX); |
| |
| out: |
| wil_halp_unvote(wil); |
| return rc; |
| } |
| |
| int wmi_send(struct wil6210_priv *wil, u16 cmdid, void *buf, u16 len) |
| { |
| int rc; |
| |
| mutex_lock(&wil->wmi_mutex); |
| rc = __wmi_send(wil, cmdid, buf, len); |
| mutex_unlock(&wil->wmi_mutex); |
| |
| return rc; |
| } |
| |
| /*=== Event handlers ===*/ |
| static void wmi_evt_ready(struct wil6210_priv *wil, int id, void *d, int len) |
| { |
| struct wireless_dev *wdev = wil->wdev; |
| struct wmi_ready_event *evt = d; |
| |
| wil->n_mids = evt->numof_additional_mids; |
| |
| wil_info(wil, "FW ver. %s(SW %d); MAC %pM; %d MID's\n", |
| wil->fw_version, le32_to_cpu(evt->sw_version), |
| evt->mac, wil->n_mids); |
| /* ignore MAC address, we already have it from the boot loader */ |
| strlcpy(wdev->wiphy->fw_version, wil->fw_version, |
| sizeof(wdev->wiphy->fw_version)); |
| |
| if (len > offsetof(struct wmi_ready_event, rfc_read_calib_result)) { |
| wil_dbg_wmi(wil, "rfc calibration result %d\n", |
| evt->rfc_read_calib_result); |
| wil->fw_calib_result = evt->rfc_read_calib_result; |
| } |
| wil_set_recovery_state(wil, fw_recovery_idle); |
| set_bit(wil_status_fwready, wil->status); |
| /* let the reset sequence continue */ |
| complete(&wil->wmi_ready); |
| } |
| |
| static void wmi_evt_rx_mgmt(struct wil6210_priv *wil, int id, void *d, int len) |
| { |
| struct wmi_rx_mgmt_packet_event *data = d; |
| struct wiphy *wiphy = wil_to_wiphy(wil); |
| struct ieee80211_mgmt *rx_mgmt_frame = |
| (struct ieee80211_mgmt *)data->payload; |
| int flen = len - offsetof(struct wmi_rx_mgmt_packet_event, payload); |
| int ch_no; |
| u32 freq; |
| struct ieee80211_channel *channel; |
| s32 signal; |
| __le16 fc; |
| u32 d_len; |
| u16 d_status; |
| |
| if (flen < 0) { |
| wil_err(wil, "MGMT Rx: short event, len %d\n", len); |
| return; |
| } |
| |
| d_len = le32_to_cpu(data->info.len); |
| if (d_len != flen) { |
| wil_err(wil, |
| "MGMT Rx: length mismatch, d_len %d should be %d\n", |
| d_len, flen); |
| return; |
| } |
| |
| ch_no = data->info.channel + 1; |
| freq = ieee80211_channel_to_frequency(ch_no, NL80211_BAND_60GHZ); |
| channel = ieee80211_get_channel(wiphy, freq); |
| if (test_bit(WMI_FW_CAPABILITY_RSSI_REPORTING, wil->fw_capabilities)) |
| signal = 100 * data->info.rssi; |
| else |
| signal = data->info.sqi; |
| d_status = le16_to_cpu(data->info.status); |
| fc = rx_mgmt_frame->frame_control; |
| |
| wil_dbg_wmi(wil, "MGMT Rx: channel %d MCS %d RSSI %d SQI %d%%\n", |
| data->info.channel, data->info.mcs, data->info.rssi, |
| data->info.sqi); |
| wil_dbg_wmi(wil, "status 0x%04x len %d fc 0x%04x\n", d_status, d_len, |
| le16_to_cpu(fc)); |
| wil_dbg_wmi(wil, "qid %d mid %d cid %d\n", |
| data->info.qid, data->info.mid, data->info.cid); |
| wil_hex_dump_wmi("MGMT Rx ", DUMP_PREFIX_OFFSET, 16, 1, rx_mgmt_frame, |
| d_len, true); |
| |
| if (!channel) { |
| wil_err(wil, "Frame on unsupported channel\n"); |
| return; |
| } |
| |
| if (ieee80211_is_beacon(fc) || ieee80211_is_probe_resp(fc)) { |
| struct cfg80211_bss *bss; |
| u64 tsf = le64_to_cpu(rx_mgmt_frame->u.beacon.timestamp); |
| u16 cap = le16_to_cpu(rx_mgmt_frame->u.beacon.capab_info); |
| u16 bi = le16_to_cpu(rx_mgmt_frame->u.beacon.beacon_int); |
| const u8 *ie_buf = rx_mgmt_frame->u.beacon.variable; |
| size_t ie_len = d_len - offsetof(struct ieee80211_mgmt, |
| u.beacon.variable); |
| wil_dbg_wmi(wil, "Capability info : 0x%04x\n", cap); |
| wil_dbg_wmi(wil, "TSF : 0x%016llx\n", tsf); |
| wil_dbg_wmi(wil, "Beacon interval : %d\n", bi); |
| wil_hex_dump_wmi("IE ", DUMP_PREFIX_OFFSET, 16, 1, ie_buf, |
| ie_len, true); |
| |
| wil_dbg_wmi(wil, "Capability info : 0x%04x\n", cap); |
| |
| bss = cfg80211_inform_bss_frame(wiphy, channel, rx_mgmt_frame, |
| d_len, signal, GFP_KERNEL); |
| if (bss) { |
| wil_dbg_wmi(wil, "Added BSS %pM\n", |
| rx_mgmt_frame->bssid); |
| cfg80211_put_bss(wiphy, bss); |
| } else { |
| wil_err(wil, "cfg80211_inform_bss_frame() failed\n"); |
| } |
| } else { |
| mutex_lock(&wil->p2p_wdev_mutex); |
| cfg80211_rx_mgmt(wil->radio_wdev, freq, signal, |
| (void *)rx_mgmt_frame, d_len, 0); |
| mutex_unlock(&wil->p2p_wdev_mutex); |
| } |
| } |
| |
| static void wmi_evt_tx_mgmt(struct wil6210_priv *wil, int id, void *d, int len) |
| { |
| struct wmi_tx_mgmt_packet_event *data = d; |
| struct ieee80211_mgmt *mgmt_frame = |
| (struct ieee80211_mgmt *)data->payload; |
| int flen = len - offsetof(struct wmi_tx_mgmt_packet_event, payload); |
| |
| wil_hex_dump_wmi("MGMT Tx ", DUMP_PREFIX_OFFSET, 16, 1, mgmt_frame, |
| flen, true); |
| } |
| |
| static void wmi_evt_scan_complete(struct wil6210_priv *wil, int id, |
| void *d, int len) |
| { |
| mutex_lock(&wil->p2p_wdev_mutex); |
| if (wil->scan_request) { |
| struct wmi_scan_complete_event *data = d; |
| int status = le32_to_cpu(data->status); |
| struct cfg80211_scan_info info = { |
| .aborted = ((status != WMI_SCAN_SUCCESS) && |
| (status != WMI_SCAN_ABORT_REJECTED)), |
| }; |
| |
| wil_dbg_wmi(wil, "SCAN_COMPLETE(0x%08x)\n", status); |
| wil_dbg_misc(wil, "Complete scan_request 0x%p aborted %d\n", |
| wil->scan_request, info.aborted); |
| del_timer_sync(&wil->scan_timer); |
| cfg80211_scan_done(wil->scan_request, &info); |
| wil->radio_wdev = wil->wdev; |
| wil->scan_request = NULL; |
| wake_up_interruptible(&wil->wq); |
| if (wil->p2p.pending_listen_wdev) { |
| wil_dbg_misc(wil, "Scheduling delayed listen\n"); |
| schedule_work(&wil->p2p.delayed_listen_work); |
| } |
| } else { |
| wil_err(wil, "SCAN_COMPLETE while not scanning\n"); |
| } |
| mutex_unlock(&wil->p2p_wdev_mutex); |
| } |
| |
| static void wmi_evt_connect(struct wil6210_priv *wil, int id, void *d, int len) |
| { |
| struct net_device *ndev = wil_to_ndev(wil); |
| struct wireless_dev *wdev = wil->wdev; |
| struct wmi_connect_event *evt = d; |
| int ch; /* channel number */ |
| struct station_info sinfo; |
| u8 *assoc_req_ie, *assoc_resp_ie; |
| size_t assoc_req_ielen, assoc_resp_ielen; |
| /* capinfo(u16) + listen_interval(u16) + IEs */ |
| const size_t assoc_req_ie_offset = sizeof(u16) * 2; |
| /* capinfo(u16) + status_code(u16) + associd(u16) + IEs */ |
| const size_t assoc_resp_ie_offset = sizeof(u16) * 3; |
| int rc; |
| |
| if (len < sizeof(*evt)) { |
| wil_err(wil, "Connect event too short : %d bytes\n", len); |
| return; |
| } |
| if (len != sizeof(*evt) + evt->beacon_ie_len + evt->assoc_req_len + |
| evt->assoc_resp_len) { |
| wil_err(wil, |
| "Connect event corrupted : %d != %d + %d + %d + %d\n", |
| len, (int)sizeof(*evt), evt->beacon_ie_len, |
| evt->assoc_req_len, evt->assoc_resp_len); |
| return; |
| } |
| if (evt->cid >= WIL6210_MAX_CID) { |
| wil_err(wil, "Connect CID invalid : %d\n", evt->cid); |
| return; |
| } |
| |
| ch = evt->channel + 1; |
| wil_info(wil, "Connect %pM channel [%d] cid %d aid %d\n", |
| evt->bssid, ch, evt->cid, evt->aid); |
| wil_hex_dump_wmi("connect AI : ", DUMP_PREFIX_OFFSET, 16, 1, |
| evt->assoc_info, len - sizeof(*evt), true); |
| |
| /* figure out IE's */ |
| assoc_req_ie = &evt->assoc_info[evt->beacon_ie_len + |
| assoc_req_ie_offset]; |
| assoc_req_ielen = evt->assoc_req_len - assoc_req_ie_offset; |
| if (evt->assoc_req_len <= assoc_req_ie_offset) { |
| assoc_req_ie = NULL; |
| assoc_req_ielen = 0; |
| } |
| |
| assoc_resp_ie = &evt->assoc_info[evt->beacon_ie_len + |
| evt->assoc_req_len + |
| assoc_resp_ie_offset]; |
| assoc_resp_ielen = evt->assoc_resp_len - assoc_resp_ie_offset; |
| if (evt->assoc_resp_len <= assoc_resp_ie_offset) { |
| assoc_resp_ie = NULL; |
| assoc_resp_ielen = 0; |
| } |
| |
| if (test_bit(wil_status_resetting, wil->status) || |
| !test_bit(wil_status_fwready, wil->status)) { |
| wil_err(wil, "status_resetting, cancel connect event, CID %d\n", |
| evt->cid); |
| /* no need for cleanup, wil_reset will do that */ |
| return; |
| } |
| |
| mutex_lock(&wil->mutex); |
| |
| if ((wdev->iftype == NL80211_IFTYPE_STATION) || |
| (wdev->iftype == NL80211_IFTYPE_P2P_CLIENT)) { |
| if (!test_bit(wil_status_fwconnecting, wil->status)) { |
| wil_err(wil, "Not in connecting state\n"); |
| mutex_unlock(&wil->mutex); |
| return; |
| } |
| del_timer_sync(&wil->connect_timer); |
| } else if ((wdev->iftype == NL80211_IFTYPE_AP) || |
| (wdev->iftype == NL80211_IFTYPE_P2P_GO)) { |
| if (wil->sta[evt->cid].status != wil_sta_unused) { |
| wil_err(wil, "AP: Invalid status %d for CID %d\n", |
| wil->sta[evt->cid].status, evt->cid); |
| mutex_unlock(&wil->mutex); |
| return; |
| } |
| } |
| |
| /* FIXME FW can transmit only ucast frames to peer */ |
| /* FIXME real ring_id instead of hard coded 0 */ |
| ether_addr_copy(wil->sta[evt->cid].addr, evt->bssid); |
| wil->sta[evt->cid].status = wil_sta_conn_pending; |
| |
| rc = wil_tx_init(wil, evt->cid); |
| if (rc) { |
| wil_err(wil, "config tx vring failed for CID %d, rc (%d)\n", |
| evt->cid, rc); |
| wmi_disconnect_sta(wil, wil->sta[evt->cid].addr, |
| WLAN_REASON_UNSPECIFIED, false, false); |
| } else { |
| wil_info(wil, "successful connection to CID %d\n", evt->cid); |
| } |
| |
| if ((wdev->iftype == NL80211_IFTYPE_STATION) || |
| (wdev->iftype == NL80211_IFTYPE_P2P_CLIENT)) { |
| if (rc) { |
| netif_carrier_off(ndev); |
| wil6210_bus_request(wil, WIL_DEFAULT_BUS_REQUEST_KBPS); |
| wil_err(wil, "cfg80211_connect_result with failure\n"); |
| cfg80211_connect_result(ndev, evt->bssid, NULL, 0, |
| NULL, 0, |
| WLAN_STATUS_UNSPECIFIED_FAILURE, |
| GFP_KERNEL); |
| goto out; |
| } else { |
| struct wiphy *wiphy = wil_to_wiphy(wil); |
| |
| cfg80211_ref_bss(wiphy, wil->bss); |
| cfg80211_connect_bss(ndev, evt->bssid, wil->bss, |
| assoc_req_ie, assoc_req_ielen, |
| assoc_resp_ie, assoc_resp_ielen, |
| WLAN_STATUS_SUCCESS, GFP_KERNEL, |
| NL80211_TIMEOUT_UNSPECIFIED); |
| } |
| wil->bss = NULL; |
| } else if ((wdev->iftype == NL80211_IFTYPE_AP) || |
| (wdev->iftype == NL80211_IFTYPE_P2P_GO)) { |
| if (rc) { |
| if (disable_ap_sme) |
| /* notify new_sta has failed */ |
| cfg80211_del_sta(ndev, evt->bssid, GFP_KERNEL); |
| goto out; |
| } |
| |
| memset(&sinfo, 0, sizeof(sinfo)); |
| |
| sinfo.generation = wil->sinfo_gen++; |
| |
| if (assoc_req_ie) { |
| sinfo.assoc_req_ies = assoc_req_ie; |
| sinfo.assoc_req_ies_len = assoc_req_ielen; |
| } |
| |
| cfg80211_new_sta(ndev, evt->bssid, &sinfo, GFP_KERNEL); |
| } else { |
| wil_err(wil, "unhandled iftype %d for CID %d\n", wdev->iftype, |
| evt->cid); |
| goto out; |
| } |
| |
| wil->sta[evt->cid].status = wil_sta_connected; |
| wil->sta[evt->cid].aid = evt->aid; |
| set_bit(wil_status_fwconnected, wil->status); |
| wil_update_net_queues_bh(wil, NULL, false); |
| |
| out: |
| if (rc) |
| wil->sta[evt->cid].status = wil_sta_unused; |
| clear_bit(wil_status_fwconnecting, wil->status); |
| mutex_unlock(&wil->mutex); |
| } |
| |
| static void wmi_evt_disconnect(struct wil6210_priv *wil, int id, |
| void *d, int len) |
| { |
| struct wmi_disconnect_event *evt = d; |
| u16 reason_code = le16_to_cpu(evt->protocol_reason_status); |
| |
| wil_info(wil, "Disconnect %pM reason [proto %d wmi %d]\n", |
| evt->bssid, reason_code, evt->disconnect_reason); |
| |
| wil->sinfo_gen++; |
| |
| if (test_bit(wil_status_resetting, wil->status) || |
| !test_bit(wil_status_fwready, wil->status)) { |
| wil_err(wil, "status_resetting, cancel disconnect event\n"); |
| /* no need for cleanup, wil_reset will do that */ |
| return; |
| } |
| |
| mutex_lock(&wil->mutex); |
| wil6210_disconnect(wil, evt->bssid, reason_code, true); |
| mutex_unlock(&wil->mutex); |
| } |
| |
| /* |
| * Firmware reports EAPOL frame using WME event. |
| * Reconstruct Ethernet frame and deliver it via normal Rx |
| */ |
| static void wmi_evt_eapol_rx(struct wil6210_priv *wil, int id, |
| void *d, int len) |
| { |
| struct net_device *ndev = wil_to_ndev(wil); |
| struct wmi_eapol_rx_event *evt = d; |
| u16 eapol_len = le16_to_cpu(evt->eapol_len); |
| int sz = eapol_len + ETH_HLEN; |
| struct sk_buff *skb; |
| struct ethhdr *eth; |
| int cid; |
| struct wil_net_stats *stats = NULL; |
| |
| wil_dbg_wmi(wil, "EAPOL len %d from %pM\n", eapol_len, |
| evt->src_mac); |
| |
| cid = wil_find_cid(wil, evt->src_mac); |
| if (cid >= 0) |
| stats = &wil->sta[cid].stats; |
| |
| if (eapol_len > 196) { /* TODO: revisit size limit */ |
| wil_err(wil, "EAPOL too large\n"); |
| return; |
| } |
| |
| skb = alloc_skb(sz, GFP_KERNEL); |
| if (!skb) { |
| wil_err(wil, "Failed to allocate skb\n"); |
| return; |
| } |
| |
| eth = skb_put(skb, ETH_HLEN); |
| ether_addr_copy(eth->h_dest, ndev->dev_addr); |
| ether_addr_copy(eth->h_source, evt->src_mac); |
| eth->h_proto = cpu_to_be16(ETH_P_PAE); |
| skb_put_data(skb, evt->eapol, eapol_len); |
| skb->protocol = eth_type_trans(skb, ndev); |
| if (likely(netif_rx_ni(skb) == NET_RX_SUCCESS)) { |
| ndev->stats.rx_packets++; |
| ndev->stats.rx_bytes += sz; |
| if (stats) { |
| stats->rx_packets++; |
| stats->rx_bytes += sz; |
| } |
| } else { |
| ndev->stats.rx_dropped++; |
| if (stats) |
| stats->rx_dropped++; |
| } |
| } |
| |
| static void wmi_evt_vring_en(struct wil6210_priv *wil, int id, void *d, int len) |
| { |
| struct wmi_vring_en_event *evt = d; |
| u8 vri = evt->vring_index; |
| struct wireless_dev *wdev = wil_to_wdev(wil); |
| |
| wil_dbg_wmi(wil, "Enable vring %d\n", vri); |
| |
| if (vri >= ARRAY_SIZE(wil->vring_tx)) { |
| wil_err(wil, "Enable for invalid vring %d\n", vri); |
| return; |
| } |
| |
| if (wdev->iftype != NL80211_IFTYPE_AP || !disable_ap_sme) |
| /* in AP mode with disable_ap_sme, this is done by |
| * wil_cfg80211_change_station() |
| */ |
| wil->vring_tx_data[vri].dot1x_open = true; |
| if (vri == wil->bcast_vring) /* no BA for bcast */ |
| return; |
| if (agg_wsize >= 0) |
| wil_addba_tx_request(wil, vri, agg_wsize); |
| } |
| |
| static void wmi_evt_ba_status(struct wil6210_priv *wil, int id, void *d, |
| int len) |
| { |
| struct wmi_ba_status_event *evt = d; |
| struct vring_tx_data *txdata; |
| |
| wil_dbg_wmi(wil, "BACK[%d] %s {%d} timeout %d AMSDU%s\n", |
| evt->ringid, |
| evt->status == WMI_BA_AGREED ? "OK" : "N/A", |
| evt->agg_wsize, __le16_to_cpu(evt->ba_timeout), |
| evt->amsdu ? "+" : "-"); |
| |
| if (evt->ringid >= WIL6210_MAX_TX_RINGS) { |
| wil_err(wil, "invalid ring id %d\n", evt->ringid); |
| return; |
| } |
| |
| if (evt->status != WMI_BA_AGREED) { |
| evt->ba_timeout = 0; |
| evt->agg_wsize = 0; |
| evt->amsdu = 0; |
| } |
| |
| txdata = &wil->vring_tx_data[evt->ringid]; |
| |
| txdata->agg_timeout = le16_to_cpu(evt->ba_timeout); |
| txdata->agg_wsize = evt->agg_wsize; |
| txdata->agg_amsdu = evt->amsdu; |
| txdata->addba_in_progress = false; |
| } |
| |
| static void wmi_evt_addba_rx_req(struct wil6210_priv *wil, int id, void *d, |
| int len) |
| { |
| struct wmi_rcp_addba_req_event *evt = d; |
| |
| wil_addba_rx_request(wil, evt->cidxtid, evt->dialog_token, |
| evt->ba_param_set, evt->ba_timeout, |
| evt->ba_seq_ctrl); |
| } |
| |
| static void wmi_evt_delba(struct wil6210_priv *wil, int id, void *d, int len) |
| __acquires(&sta->tid_rx_lock) __releases(&sta->tid_rx_lock) |
| { |
| struct wmi_delba_event *evt = d; |
| u8 cid, tid; |
| u16 reason = __le16_to_cpu(evt->reason); |
| struct wil_sta_info *sta; |
| struct wil_tid_ampdu_rx *r; |
| |
| might_sleep(); |
| parse_cidxtid(evt->cidxtid, &cid, &tid); |
| wil_dbg_wmi(wil, "DELBA CID %d TID %d from %s reason %d\n", |
| cid, tid, |
| evt->from_initiator ? "originator" : "recipient", |
| reason); |
| if (!evt->from_initiator) { |
| int i; |
| /* find Tx vring it belongs to */ |
| for (i = 0; i < ARRAY_SIZE(wil->vring2cid_tid); i++) { |
| if ((wil->vring2cid_tid[i][0] == cid) && |
| (wil->vring2cid_tid[i][1] == tid)) { |
| struct vring_tx_data *txdata = |
| &wil->vring_tx_data[i]; |
| |
| wil_dbg_wmi(wil, "DELBA Tx vring %d\n", i); |
| txdata->agg_timeout = 0; |
| txdata->agg_wsize = 0; |
| txdata->addba_in_progress = false; |
| |
| break; /* max. 1 matching ring */ |
| } |
| } |
| if (i >= ARRAY_SIZE(wil->vring2cid_tid)) |
| wil_err(wil, "DELBA: unable to find Tx vring\n"); |
| return; |
| } |
| |
| sta = &wil->sta[cid]; |
| |
| spin_lock_bh(&sta->tid_rx_lock); |
| |
| r = sta->tid_rx[tid]; |
| sta->tid_rx[tid] = NULL; |
| wil_tid_ampdu_rx_free(wil, r); |
| |
| spin_unlock_bh(&sta->tid_rx_lock); |
| } |
| |
| /** |
| * Some events are ignored for purpose; and need not be interpreted as |
| * "unhandled events" |
| */ |
| static void wmi_evt_ignore(struct wil6210_priv *wil, int id, void *d, int len) |
| { |
| wil_dbg_wmi(wil, "Ignore event 0x%04x len %d\n", id, len); |
| } |
| |
| static const struct { |
| int eventid; |
| void (*handler)(struct wil6210_priv *wil, int eventid, |
| void *data, int data_len); |
| } wmi_evt_handlers[] = { |
| {WMI_READY_EVENTID, wmi_evt_ready}, |
| {WMI_FW_READY_EVENTID, wmi_evt_ignore}, |
| {WMI_RX_MGMT_PACKET_EVENTID, wmi_evt_rx_mgmt}, |
| {WMI_TX_MGMT_PACKET_EVENTID, wmi_evt_tx_mgmt}, |
| {WMI_SCAN_COMPLETE_EVENTID, wmi_evt_scan_complete}, |
| {WMI_CONNECT_EVENTID, wmi_evt_connect}, |
| {WMI_DISCONNECT_EVENTID, wmi_evt_disconnect}, |
| {WMI_EAPOL_RX_EVENTID, wmi_evt_eapol_rx}, |
| {WMI_BA_STATUS_EVENTID, wmi_evt_ba_status}, |
| {WMI_RCP_ADDBA_REQ_EVENTID, wmi_evt_addba_rx_req}, |
| {WMI_DELBA_EVENTID, wmi_evt_delba}, |
| {WMI_VRING_EN_EVENTID, wmi_evt_vring_en}, |
| {WMI_DATA_PORT_OPEN_EVENTID, wmi_evt_ignore}, |
| }; |
| |
| /* |
| * Run in IRQ context |
| * Extract WMI command from mailbox. Queue it to the @wil->pending_wmi_ev |
| * that will be eventually handled by the @wmi_event_worker in the thread |
| * context of thread "wil6210_wmi" |
| */ |
| void wmi_recv_cmd(struct wil6210_priv *wil) |
| { |
| struct wil6210_mbox_ring_desc d_tail; |
| struct wil6210_mbox_hdr hdr; |
| struct wil6210_mbox_ring *r = &wil->mbox_ctl.rx; |
| struct pending_wmi_event *evt; |
| u8 *cmd; |
| void __iomem *src; |
| ulong flags; |
| unsigned n; |
| unsigned int num_immed_reply = 0; |
| |
| if (!test_bit(wil_status_mbox_ready, wil->status)) { |
| wil_err(wil, "Reset in progress. Cannot handle WMI event\n"); |
| return; |
| } |
| |
| if (test_bit(wil_status_suspended, wil->status)) { |
| wil_err(wil, "suspended. cannot handle WMI event\n"); |
| return; |
| } |
| |
| for (n = 0;; n++) { |
| u16 len; |
| bool q; |
| bool immed_reply = false; |
| |
| r->head = wil_r(wil, RGF_MBOX + |
| offsetof(struct wil6210_mbox_ctl, rx.head)); |
| if (r->tail == r->head) |
| break; |
| |
| wil_dbg_wmi(wil, "Mbox head %08x tail %08x\n", |
| r->head, r->tail); |
| /* read cmd descriptor from tail */ |
| wil_memcpy_fromio_32(&d_tail, wil->csr + HOSTADDR(r->tail), |
| sizeof(struct wil6210_mbox_ring_desc)); |
| if (d_tail.sync == 0) { |
| wil_err(wil, "Mbox evt not owned by FW?\n"); |
| break; |
| } |
| |
| /* read cmd header from descriptor */ |
| if (0 != wmi_read_hdr(wil, d_tail.addr, &hdr)) { |
| wil_err(wil, "Mbox evt at 0x%08x?\n", |
| le32_to_cpu(d_tail.addr)); |
| break; |
| } |
| len = le16_to_cpu(hdr.len); |
| wil_dbg_wmi(wil, "Mbox evt %04x %04x %04x %02x\n", |
| le16_to_cpu(hdr.seq), len, le16_to_cpu(hdr.type), |
| hdr.flags); |
| |
| /* read cmd buffer from descriptor */ |
| src = wmi_buffer(wil, d_tail.addr) + |
| sizeof(struct wil6210_mbox_hdr); |
| evt = kmalloc(ALIGN(offsetof(struct pending_wmi_event, |
| event.wmi) + len, 4), |
| GFP_KERNEL); |
| if (!evt) |
| break; |
| |
| evt->event.hdr = hdr; |
| cmd = (void *)&evt->event.wmi; |
| wil_memcpy_fromio_32(cmd, src, len); |
| /* mark entry as empty */ |
| wil_w(wil, r->tail + |
| offsetof(struct wil6210_mbox_ring_desc, sync), 0); |
| /* indicate */ |
| if ((hdr.type == WIL_MBOX_HDR_TYPE_WMI) && |
| (len >= sizeof(struct wmi_cmd_hdr))) { |
| struct wmi_cmd_hdr *wmi = &evt->event.wmi; |
| u16 id = le16_to_cpu(wmi->command_id); |
| u32 tstamp = le32_to_cpu(wmi->fw_timestamp); |
| if (test_bit(wil_status_resuming, wil->status)) { |
| if (id == WMI_TRAFFIC_RESUME_EVENTID) |
| clear_bit(wil_status_resuming, |
| wil->status); |
| else |
| wil_err(wil, |
| "WMI evt %d while resuming\n", |
| id); |
| } |
| spin_lock_irqsave(&wil->wmi_ev_lock, flags); |
| if (wil->reply_id && wil->reply_id == id) { |
| if (wil->reply_buf) { |
| memcpy(wil->reply_buf, wmi, |
| min(len, wil->reply_size)); |
| immed_reply = true; |
| } |
| if (id == WMI_TRAFFIC_SUSPEND_EVENTID) { |
| wil_dbg_wmi(wil, |
| "set suspend_resp_rcvd\n"); |
| wil->suspend_resp_rcvd = true; |
| } |
| } |
| spin_unlock_irqrestore(&wil->wmi_ev_lock, flags); |
| |
| wil_dbg_wmi(wil, "WMI event 0x%04x MID %d @%d msec\n", |
| id, wmi->mid, tstamp); |
| trace_wil6210_wmi_event(wmi, &wmi[1], |
| len - sizeof(*wmi)); |
| } |
| wil_hex_dump_wmi("evt ", DUMP_PREFIX_OFFSET, 16, 1, |
| &evt->event.hdr, sizeof(hdr) + len, true); |
| |
| /* advance tail */ |
| r->tail = r->base + ((r->tail - r->base + |
| sizeof(struct wil6210_mbox_ring_desc)) % r->size); |
| wil_w(wil, RGF_MBOX + |
| offsetof(struct wil6210_mbox_ctl, rx.tail), r->tail); |
| |
| if (immed_reply) { |
| wil_dbg_wmi(wil, "recv_cmd: Complete WMI 0x%04x\n", |
| wil->reply_id); |
| kfree(evt); |
| num_immed_reply++; |
| complete(&wil->wmi_call); |
| } else { |
| /* add to the pending list */ |
| spin_lock_irqsave(&wil->wmi_ev_lock, flags); |
| list_add_tail(&evt->list, &wil->pending_wmi_ev); |
| spin_unlock_irqrestore(&wil->wmi_ev_lock, flags); |
| q = queue_work(wil->wmi_wq, &wil->wmi_event_worker); |
| wil_dbg_wmi(wil, "queue_work -> %d\n", q); |
| } |
| } |
| /* normally, 1 event per IRQ should be processed */ |
| wil_dbg_wmi(wil, "recv_cmd: -> %d events queued, %d completed\n", |
| n - num_immed_reply, num_immed_reply); |
| } |
| |
| int wmi_call(struct wil6210_priv *wil, u16 cmdid, void *buf, u16 len, |
| u16 reply_id, void *reply, u8 reply_size, int to_msec) |
| { |
| int rc; |
| unsigned long remain; |
| ulong flags; |
| |
| mutex_lock(&wil->wmi_mutex); |
| |
| spin_lock_irqsave(&wil->wmi_ev_lock, flags); |
| wil->reply_id = reply_id; |
| wil->reply_buf = reply; |
| wil->reply_size = reply_size; |
| reinit_completion(&wil->wmi_call); |
| spin_unlock_irqrestore(&wil->wmi_ev_lock, flags); |
| |
| rc = __wmi_send(wil, cmdid, buf, len); |
| if (rc) |
| goto out; |
| |
| remain = wait_for_completion_timeout(&wil->wmi_call, |
| msecs_to_jiffies(to_msec)); |
| if (0 == remain) { |
| wil_err(wil, "wmi_call(0x%04x->0x%04x) timeout %d msec\n", |
| cmdid, reply_id, to_msec); |
| rc = -ETIME; |
| } else { |
| wil_dbg_wmi(wil, |
| "wmi_call(0x%04x->0x%04x) completed in %d msec\n", |
| cmdid, reply_id, |
| to_msec - jiffies_to_msecs(remain)); |
| } |
| |
| out: |
| spin_lock_irqsave(&wil->wmi_ev_lock, flags); |
| wil->reply_id = 0; |
| wil->reply_buf = NULL; |
| wil->reply_size = 0; |
| spin_unlock_irqrestore(&wil->wmi_ev_lock, flags); |
| |
| mutex_unlock(&wil->wmi_mutex); |
| |
| return rc; |
| } |
| |
| int wmi_echo(struct wil6210_priv *wil) |
| { |
| struct wmi_echo_cmd cmd = { |
| .value = cpu_to_le32(0x12345678), |
| }; |
| |
| return wmi_call(wil, WMI_ECHO_CMDID, &cmd, sizeof(cmd), |
| WMI_ECHO_RSP_EVENTID, NULL, 0, 50); |
| } |
| |
| int wmi_set_mac_address(struct wil6210_priv *wil, void *addr) |
| { |
| struct wmi_set_mac_address_cmd cmd; |
| |
| ether_addr_copy(cmd.mac, addr); |
| |
| wil_dbg_wmi(wil, "Set MAC %pM\n", addr); |
| |
| return wmi_send(wil, WMI_SET_MAC_ADDRESS_CMDID, &cmd, sizeof(cmd)); |
| } |
| |
| int wmi_led_cfg(struct wil6210_priv *wil, bool enable) |
| { |
| int rc = 0; |
| struct wmi_led_cfg_cmd cmd = { |
| .led_mode = enable, |
| .id = led_id, |
| .slow_blink_cfg.blink_on = |
| cpu_to_le32(led_blink_time[WIL_LED_TIME_SLOW].on_ms), |
| .slow_blink_cfg.blink_off = |
| cpu_to_le32(led_blink_time[WIL_LED_TIME_SLOW].off_ms), |
| .medium_blink_cfg.blink_on = |
| cpu_to_le32(led_blink_time[WIL_LED_TIME_MED].on_ms), |
| .medium_blink_cfg.blink_off = |
| cpu_to_le32(led_blink_time[WIL_LED_TIME_MED].off_ms), |
| .fast_blink_cfg.blink_on = |
| cpu_to_le32(led_blink_time[WIL_LED_TIME_FAST].on_ms), |
| .fast_blink_cfg.blink_off = |
| cpu_to_le32(led_blink_time[WIL_LED_TIME_FAST].off_ms), |
| .led_polarity = led_polarity, |
| }; |
| struct { |
| struct wmi_cmd_hdr wmi; |
| struct wmi_led_cfg_done_event evt; |
| } __packed reply; |
| |
| if (led_id == WIL_LED_INVALID_ID) |
| goto out; |
| |
| if (led_id > WIL_LED_MAX_ID) { |
| wil_err(wil, "Invalid led id %d\n", led_id); |
| rc = -EINVAL; |
| goto out; |
| } |
| |
| wil_dbg_wmi(wil, |
| "%s led %d\n", |
| enable ? "enabling" : "disabling", led_id); |
| |
| rc = wmi_call(wil, WMI_LED_CFG_CMDID, &cmd, sizeof(cmd), |
| WMI_LED_CFG_DONE_EVENTID, &reply, sizeof(reply), |
| 100); |
| if (rc) |
| goto out; |
| |
| if (reply.evt.status) { |
| wil_err(wil, "led %d cfg failed with status %d\n", |
| led_id, le32_to_cpu(reply.evt.status)); |
| rc = -EINVAL; |
| } |
| |
| out: |
| return rc; |
| } |
| |
| int wmi_pcp_start(struct wil6210_priv *wil, int bi, u8 wmi_nettype, |
| u8 chan, u8 hidden_ssid, u8 is_go) |
| { |
| int rc; |
| |
| struct wmi_pcp_start_cmd cmd = { |
| .bcon_interval = cpu_to_le16(bi), |
| .network_type = wmi_nettype, |
| .disable_sec_offload = 1, |
| .channel = chan - 1, |
| .pcp_max_assoc_sta = max_assoc_sta, |
| .hidden_ssid = hidden_ssid, |
| .is_go = is_go, |
| .disable_ap_sme = disable_ap_sme, |
| .abft_len = wil->abft_len, |
| }; |
| struct { |
| struct wmi_cmd_hdr wmi; |
| struct wmi_pcp_started_event evt; |
| } __packed reply; |
| |
| if (!wil->privacy) |
| cmd.disable_sec = 1; |
| |
| if ((cmd.pcp_max_assoc_sta > WIL6210_MAX_CID) || |
| (cmd.pcp_max_assoc_sta <= 0)) { |
| wil_info(wil, |
| "Requested connection limit %u, valid values are 1 - %d. Setting to %d\n", |
| max_assoc_sta, WIL6210_MAX_CID, WIL6210_MAX_CID); |
| cmd.pcp_max_assoc_sta = WIL6210_MAX_CID; |
| } |
| |
| if (disable_ap_sme && |
| !test_bit(WMI_FW_CAPABILITY_DISABLE_AP_SME, |
| wil->fw_capabilities)) { |
| wil_err(wil, "disable_ap_sme not supported by FW\n"); |
| return -EOPNOTSUPP; |
| } |
| |
| /* |
| * Processing time may be huge, in case of secure AP it takes about |
| * 3500ms for FW to start AP |
| */ |
| rc = wmi_call(wil, WMI_PCP_START_CMDID, &cmd, sizeof(cmd), |
| WMI_PCP_STARTED_EVENTID, &reply, sizeof(reply), 5000); |
| if (rc) |
| return rc; |
| |
| if (reply.evt.status != WMI_FW_STATUS_SUCCESS) |
| rc = -EINVAL; |
| |
| if (wmi_nettype != WMI_NETTYPE_P2P) |
| /* Don't fail due to error in the led configuration */ |
| wmi_led_cfg(wil, true); |
| |
| return rc; |
| } |
| |
| int wmi_pcp_stop(struct wil6210_priv *wil) |
| { |
| int rc; |
| |
| rc = wmi_led_cfg(wil, false); |
| if (rc) |
| return rc; |
| |
| return wmi_call(wil, WMI_PCP_STOP_CMDID, NULL, 0, |
| WMI_PCP_STOPPED_EVENTID, NULL, 0, 20); |
| } |
| |
| int wmi_set_ssid(struct wil6210_priv *wil, u8 ssid_len, const void *ssid) |
| { |
| struct wmi_set_ssid_cmd cmd = { |
| .ssid_len = cpu_to_le32(ssid_len), |
| }; |
| |
| if (ssid_len > sizeof(cmd.ssid)) |
| return -EINVAL; |
| |
| memcpy(cmd.ssid, ssid, ssid_len); |
| |
| return wmi_send(wil, WMI_SET_SSID_CMDID, &cmd, sizeof(cmd)); |
| } |
| |
| int wmi_get_ssid(struct wil6210_priv *wil, u8 *ssid_len, void *ssid) |
| { |
| int rc; |
| struct { |
| struct wmi_cmd_hdr wmi; |
| struct wmi_set_ssid_cmd cmd; |
| } __packed reply; |
| int len; /* reply.cmd.ssid_len in CPU order */ |
| |
| rc = wmi_call(wil, WMI_GET_SSID_CMDID, NULL, 0, WMI_GET_SSID_EVENTID, |
| &reply, sizeof(reply), 20); |
| if (rc) |
| return rc; |
| |
| len = le32_to_cpu(reply.cmd.ssid_len); |
| if (len > sizeof(reply.cmd.ssid)) |
| return -EINVAL; |
| |
| *ssid_len = len; |
| memcpy(ssid, reply.cmd.ssid, len); |
| |
| return 0; |
| } |
| |
| int wmi_set_channel(struct wil6210_priv *wil, int channel) |
| { |
| struct wmi_set_pcp_channel_cmd cmd = { |
| .channel = channel - 1, |
| }; |
| |
| return wmi_send(wil, WMI_SET_PCP_CHANNEL_CMDID, &cmd, sizeof(cmd)); |
| } |
| |
| int wmi_get_channel(struct wil6210_priv *wil, int *channel) |
| { |
| int rc; |
| struct { |
| struct wmi_cmd_hdr wmi; |
| struct wmi_set_pcp_channel_cmd cmd; |
| } __packed reply; |
| |
| rc = wmi_call(wil, WMI_GET_PCP_CHANNEL_CMDID, NULL, 0, |
| WMI_GET_PCP_CHANNEL_EVENTID, &reply, sizeof(reply), 20); |
| if (rc) |
| return rc; |
| |
| if (reply.cmd.channel > 3) |
| return -EINVAL; |
| |
| *channel = reply.cmd.channel + 1; |
| |
| return 0; |
| } |
| |
| int wmi_p2p_cfg(struct wil6210_priv *wil, int channel, int bi) |
| { |
| int rc; |
| struct wmi_p2p_cfg_cmd cmd = { |
| .discovery_mode = WMI_DISCOVERY_MODE_PEER2PEER, |
| .bcon_interval = cpu_to_le16(bi), |
| .channel = channel - 1, |
| }; |
| struct { |
| struct wmi_cmd_hdr wmi; |
| struct wmi_p2p_cfg_done_event evt; |
| } __packed reply; |
| |
| wil_dbg_wmi(wil, "sending WMI_P2P_CFG_CMDID\n"); |
| |
| rc = wmi_call(wil, WMI_P2P_CFG_CMDID, &cmd, sizeof(cmd), |
| WMI_P2P_CFG_DONE_EVENTID, &reply, sizeof(reply), 300); |
| if (!rc && reply.evt.status != WMI_FW_STATUS_SUCCESS) { |
| wil_err(wil, "P2P_CFG failed. status %d\n", reply.evt.status); |
| rc = -EINVAL; |
| } |
| |
| return rc; |
| } |
| |
| int wmi_start_listen(struct wil6210_priv *wil) |
| { |
| int rc; |
| struct { |
| struct wmi_cmd_hdr wmi; |
| struct wmi_listen_started_event evt; |
| } __packed reply; |
| |
| wil_dbg_wmi(wil, "sending WMI_START_LISTEN_CMDID\n"); |
| |
| rc = wmi_call(wil, WMI_START_LISTEN_CMDID, NULL, 0, |
| WMI_LISTEN_STARTED_EVENTID, &reply, sizeof(reply), 300); |
| if (!rc && reply.evt.status != WMI_FW_STATUS_SUCCESS) { |
| wil_err(wil, "device failed to start listen. status %d\n", |
| reply.evt.status); |
| rc = -EINVAL; |
| } |
| |
| return rc; |
| } |
| |
| int wmi_start_search(struct wil6210_priv *wil) |
| { |
| int rc; |
| struct { |
| struct wmi_cmd_hdr wmi; |
| struct wmi_search_started_event evt; |
| } __packed reply; |
| |
| wil_dbg_wmi(wil, "sending WMI_START_SEARCH_CMDID\n"); |
| |
| rc = wmi_call(wil, WMI_START_SEARCH_CMDID, NULL, 0, |
| WMI_SEARCH_STARTED_EVENTID, &reply, sizeof(reply), 300); |
| if (!rc && reply.evt.status != WMI_FW_STATUS_SUCCESS) { |
| wil_err(wil, "device failed to start search. status %d\n", |
| reply.evt.status); |
| rc = -EINVAL; |
| } |
| |
| return rc; |
| } |
| |
| int wmi_stop_discovery(struct wil6210_priv *wil) |
| { |
| int rc; |
| |
| wil_dbg_wmi(wil, "sending WMI_DISCOVERY_STOP_CMDID\n"); |
| |
| rc = wmi_call(wil, WMI_DISCOVERY_STOP_CMDID, NULL, 0, |
| WMI_DISCOVERY_STOPPED_EVENTID, NULL, 0, 100); |
| |
| if (rc) |
| wil_err(wil, "Failed to stop discovery\n"); |
| |
| return rc; |
| } |
| |
| int wmi_del_cipher_key(struct wil6210_priv *wil, u8 key_index, |
| const void *mac_addr, int key_usage) |
| { |
| struct wmi_delete_cipher_key_cmd cmd = { |
| .key_index = key_index, |
| }; |
| |
| if (mac_addr) |
| memcpy(cmd.mac, mac_addr, WMI_MAC_LEN); |
| |
| return wmi_send(wil, WMI_DELETE_CIPHER_KEY_CMDID, &cmd, sizeof(cmd)); |
| } |
| |
| int wmi_add_cipher_key(struct wil6210_priv *wil, u8 key_index, |
| const void *mac_addr, int key_len, const void *key, |
| int key_usage) |
| { |
| struct wmi_add_cipher_key_cmd cmd = { |
| .key_index = key_index, |
| .key_usage = key_usage, |
| .key_len = key_len, |
| }; |
| |
| if (!key || (key_len > sizeof(cmd.key))) |
| return -EINVAL; |
| |
| memcpy(cmd.key, key, key_len); |
| if (mac_addr) |
| memcpy(cmd.mac, mac_addr, WMI_MAC_LEN); |
| |
| return wmi_send(wil, WMI_ADD_CIPHER_KEY_CMDID, &cmd, sizeof(cmd)); |
| } |
| |
| int wmi_set_ie(struct wil6210_priv *wil, u8 type, u16 ie_len, const void *ie) |
| { |
| static const char *const names[] = { |
| [WMI_FRAME_BEACON] = "BEACON", |
| [WMI_FRAME_PROBE_REQ] = "PROBE_REQ", |
| [WMI_FRAME_PROBE_RESP] = "WMI_FRAME_PROBE_RESP", |
| [WMI_FRAME_ASSOC_REQ] = "WMI_FRAME_ASSOC_REQ", |
| [WMI_FRAME_ASSOC_RESP] = "WMI_FRAME_ASSOC_RESP", |
| }; |
| int rc; |
| u16 len = sizeof(struct wmi_set_appie_cmd) + ie_len; |
| struct wmi_set_appie_cmd *cmd; |
| |
| if (len < ie_len) { |
| rc = -EINVAL; |
| goto out; |
| } |
| |
| cmd = kzalloc(len, GFP_KERNEL); |
| if (!cmd) { |
| rc = -ENOMEM; |
| goto out; |
| } |
| if (!ie) |
| ie_len = 0; |
| |
| cmd->mgmt_frm_type = type; |
| /* BUG: FW API define ieLen as u8. Will fix FW */ |
| cmd->ie_len = cpu_to_le16(ie_len); |
| memcpy(cmd->ie_info, ie, ie_len); |
| rc = wmi_send(wil, WMI_SET_APPIE_CMDID, cmd, len); |
| kfree(cmd); |
| out: |
| if (rc) { |
| const char *name = type < ARRAY_SIZE(names) ? |
| names[type] : "??"; |
| wil_err(wil, "set_ie(%d %s) failed : %d\n", type, name, rc); |
| } |
| |
| return rc; |
| } |
| |
| /** |
| * wmi_rxon - turn radio on/off |
| * @on: turn on if true, off otherwise |
| * |
| * Only switch radio. Channel should be set separately. |
| * No timeout for rxon - radio turned on forever unless some other call |
| * turns it off |
| */ |
| int wmi_rxon(struct wil6210_priv *wil, bool on) |
| { |
| int rc; |
| struct { |
| struct wmi_cmd_hdr wmi; |
| struct wmi_listen_started_event evt; |
| } __packed reply; |
| |
| wil_info(wil, "(%s)\n", on ? "on" : "off"); |
| |
| if (on) { |
| rc = wmi_call(wil, WMI_START_LISTEN_CMDID, NULL, 0, |
| WMI_LISTEN_STARTED_EVENTID, |
| &reply, sizeof(reply), 100); |
| if ((rc == 0) && (reply.evt.status != WMI_FW_STATUS_SUCCESS)) |
| rc = -EINVAL; |
| } else { |
| rc = wmi_call(wil, WMI_DISCOVERY_STOP_CMDID, NULL, 0, |
| WMI_DISCOVERY_STOPPED_EVENTID, NULL, 0, 20); |
| } |
| |
| return rc; |
| } |
| |
| int wmi_rx_chain_add(struct wil6210_priv *wil, struct vring *vring) |
| { |
| struct wireless_dev *wdev = wil->wdev; |
| struct net_device *ndev = wil_to_ndev(wil); |
| struct wmi_cfg_rx_chain_cmd cmd = { |
| .action = WMI_RX_CHAIN_ADD, |
| .rx_sw_ring = { |
| .max_mpdu_size = cpu_to_le16( |
| wil_mtu2macbuf(wil->rx_buf_len)), |
| .ring_mem_base = cpu_to_le64(vring->pa), |
| .ring_size = cpu_to_le16(vring->size), |
| }, |
| .mid = 0, /* TODO - what is it? */ |
| .decap_trans_type = WMI_DECAP_TYPE_802_3, |
| .reorder_type = WMI_RX_SW_REORDER, |
| .host_thrsh = cpu_to_le16(rx_ring_overflow_thrsh), |
| }; |
| struct { |
| struct wmi_cmd_hdr wmi; |
| struct wmi_cfg_rx_chain_done_event evt; |
| } __packed evt; |
| int rc; |
| |
| if (wdev->iftype == NL80211_IFTYPE_MONITOR) { |
| struct ieee80211_channel *ch = wdev->preset_chandef.chan; |
| |
| cmd.sniffer_cfg.mode = cpu_to_le32(WMI_SNIFFER_ON); |
| if (ch) |
| cmd.sniffer_cfg.channel = ch->hw_value - 1; |
| cmd.sniffer_cfg.phy_info_mode = |
| cpu_to_le32(ndev->type == ARPHRD_IEEE80211_RADIOTAP); |
| cmd.sniffer_cfg.phy_support = |
| cpu_to_le32((wil->monitor_flags & MONITOR_FLAG_CONTROL) |
| ? WMI_SNIFFER_CP : WMI_SNIFFER_BOTH_PHYS); |
| } else { |
| /* Initialize offload (in non-sniffer mode). |
| * Linux IP stack always calculates IP checksum |
| * HW always calculate TCP/UDP checksum |
| */ |
| cmd.l3_l4_ctrl |= (1 << L3_L4_CTRL_TCPIP_CHECKSUM_EN_POS); |
| } |
| |
| if (rx_align_2) |
| cmd.l2_802_3_offload_ctrl |= |
| L2_802_3_OFFLOAD_CTRL_SNAP_KEEP_MSK; |
| |
| /* typical time for secure PCP is 840ms */ |
| rc = wmi_call(wil, WMI_CFG_RX_CHAIN_CMDID, &cmd, sizeof(cmd), |
| WMI_CFG_RX_CHAIN_DONE_EVENTID, &evt, sizeof(evt), 2000); |
| if (rc) |
| return rc; |
| |
| vring->hwtail = le32_to_cpu(evt.evt.rx_ring_tail_ptr); |
| |
| wil_dbg_misc(wil, "Rx init: status %d tail 0x%08x\n", |
| le32_to_cpu(evt.evt.status), vring->hwtail); |
| |
| if (le32_to_cpu(evt.evt.status) != WMI_CFG_RX_CHAIN_SUCCESS) |
| rc = -EINVAL; |
| |
| return rc; |
| } |
| |
| int wmi_get_temperature(struct wil6210_priv *wil, u32 *t_bb, u32 *t_rf) |
| { |
| int rc; |
| struct wmi_temp_sense_cmd cmd = { |
| .measure_baseband_en = cpu_to_le32(!!t_bb), |
| .measure_rf_en = cpu_to_le32(!!t_rf), |
| .measure_mode = cpu_to_le32(TEMPERATURE_MEASURE_NOW), |
| }; |
| struct { |
| struct wmi_cmd_hdr wmi; |
| struct wmi_temp_sense_done_event evt; |
| } __packed reply; |
| |
| rc = wmi_call(wil, WMI_TEMP_SENSE_CMDID, &cmd, sizeof(cmd), |
| WMI_TEMP_SENSE_DONE_EVENTID, &reply, sizeof(reply), 100); |
| if (rc) |
| return rc; |
| |
| if (t_bb) |
| *t_bb = le32_to_cpu(reply.evt.baseband_t1000); |
| if (t_rf) |
| *t_rf = le32_to_cpu(reply.evt.rf_t1000); |
| |
| return 0; |
| } |
| |
| int wmi_disconnect_sta(struct wil6210_priv *wil, const u8 *mac, |
| u16 reason, bool full_disconnect, bool del_sta) |
| { |
| int rc; |
| u16 reason_code; |
| struct wmi_disconnect_sta_cmd disc_sta_cmd = { |
| .disconnect_reason = cpu_to_le16(reason), |
| }; |
| struct wmi_del_sta_cmd del_sta_cmd = { |
| .disconnect_reason = cpu_to_le16(reason), |
| }; |
| struct { |
| struct wmi_cmd_hdr wmi; |
| struct wmi_disconnect_event evt; |
| } __packed reply; |
| |
| wil_dbg_wmi(wil, "disconnect_sta: (%pM, reason %d)\n", mac, reason); |
| |
| wil->locally_generated_disc = true; |
| if (del_sta) { |
| ether_addr_copy(del_sta_cmd.dst_mac, mac); |
| rc = wmi_call(wil, WMI_DEL_STA_CMDID, &del_sta_cmd, |
| sizeof(del_sta_cmd), WMI_DISCONNECT_EVENTID, |
| &reply, sizeof(reply), 1000); |
| } else { |
| ether_addr_copy(disc_sta_cmd.dst_mac, mac); |
| rc = wmi_call(wil, WMI_DISCONNECT_STA_CMDID, &disc_sta_cmd, |
| sizeof(disc_sta_cmd), WMI_DISCONNECT_EVENTID, |
| &reply, sizeof(reply), 1000); |
| } |
| /* failure to disconnect in reasonable time treated as FW error */ |
| if (rc) { |
| wil_fw_error_recovery(wil); |
| return rc; |
| } |
| |
| if (full_disconnect) { |
| /* call event handler manually after processing wmi_call, |
| * to avoid deadlock - disconnect event handler acquires |
| * wil->mutex while it is already held here |
| */ |
| reason_code = le16_to_cpu(reply.evt.protocol_reason_status); |
| |
| wil_dbg_wmi(wil, "Disconnect %pM reason [proto %d wmi %d]\n", |
| reply.evt.bssid, reason_code, |
| reply.evt.disconnect_reason); |
| |
| wil->sinfo_gen++; |
| wil6210_disconnect(wil, reply.evt.bssid, reason_code, true); |
| } |
| return 0; |
| } |
| |
| int wmi_addba(struct wil6210_priv *wil, u8 ringid, u8 size, u16 timeout) |
| { |
| struct wmi_vring_ba_en_cmd cmd = { |
| .ringid = ringid, |
| .agg_max_wsize = size, |
| .ba_timeout = cpu_to_le16(timeout), |
| .amsdu = 0, |
| }; |
| |
| wil_dbg_wmi(wil, "addba: (ring %d size %d timeout %d)\n", ringid, size, |
| timeout); |
| |
| return wmi_send(wil, WMI_VRING_BA_EN_CMDID, &cmd, sizeof(cmd)); |
| } |
| |
| int wmi_delba_tx(struct wil6210_priv *wil, u8 ringid, u16 reason) |
| { |
| struct wmi_vring_ba_dis_cmd cmd = { |
| .ringid = ringid, |
| .reason = cpu_to_le16(reason), |
| }; |
| |
| wil_dbg_wmi(wil, "delba_tx: (ring %d reason %d)\n", ringid, reason); |
| |
| return wmi_send(wil, WMI_VRING_BA_DIS_CMDID, &cmd, sizeof(cmd)); |
| } |
| |
| int wmi_delba_rx(struct wil6210_priv *wil, u8 cidxtid, u16 reason) |
| { |
| struct wmi_rcp_delba_cmd cmd = { |
| .cidxtid = cidxtid, |
| .reason = cpu_to_le16(reason), |
| }; |
| |
| wil_dbg_wmi(wil, "delba_rx: (CID %d TID %d reason %d)\n", cidxtid & 0xf, |
| (cidxtid >> 4) & 0xf, reason); |
| |
| return wmi_send(wil, WMI_RCP_DELBA_CMDID, &cmd, sizeof(cmd)); |
| } |
| |
| int wmi_addba_rx_resp(struct wil6210_priv *wil, u8 cid, u8 tid, u8 token, |
| u16 status, bool amsdu, u16 agg_wsize, u16 timeout) |
| { |
| int rc; |
| struct wmi_rcp_addba_resp_cmd cmd = { |
| .cidxtid = mk_cidxtid(cid, tid), |
| .dialog_token = token, |
| .status_code = cpu_to_le16(status), |
| /* bit 0: A-MSDU supported |
| * bit 1: policy (should be 0 for us) |
| * bits 2..5: TID |
| * bits 6..15: buffer size |
| */ |
| .ba_param_set = cpu_to_le16((amsdu ? 1 : 0) | (tid << 2) | |
| (agg_wsize << 6)), |
| .ba_timeout = cpu_to_le16(timeout), |
| }; |
| struct { |
| struct wmi_cmd_hdr wmi; |
| struct wmi_rcp_addba_resp_sent_event evt; |
| } __packed reply; |
| |
| wil_dbg_wmi(wil, |
| "ADDBA response for CID %d TID %d size %d timeout %d status %d AMSDU%s\n", |
| cid, tid, agg_wsize, timeout, status, amsdu ? "+" : "-"); |
| |
| rc = wmi_call(wil, WMI_RCP_ADDBA_RESP_CMDID, &cmd, sizeof(cmd), |
| WMI_RCP_ADDBA_RESP_SENT_EVENTID, &reply, sizeof(reply), |
| 100); |
| if (rc) |
| return rc; |
| |
| if (reply.evt.status) { |
| wil_err(wil, "ADDBA response failed with status %d\n", |
| le16_to_cpu(reply.evt.status)); |
| rc = -EINVAL; |
| } |
| |
| return rc; |
| } |
| |
| int wmi_ps_dev_profile_cfg(struct wil6210_priv *wil, |
| enum wmi_ps_profile_type ps_profile) |
| { |
| int rc; |
| struct wmi_ps_dev_profile_cfg_cmd cmd = { |
| .ps_profile = ps_profile, |
| }; |
| struct { |
| struct wmi_cmd_hdr wmi; |
| struct wmi_ps_dev_profile_cfg_event evt; |
| } __packed reply; |
| u32 status; |
| |
| wil_dbg_wmi(wil, "Setting ps dev profile %d\n", ps_profile); |
| |
| reply.evt.status = cpu_to_le32(WMI_PS_CFG_CMD_STATUS_ERROR); |
| |
| rc = wmi_call(wil, WMI_PS_DEV_PROFILE_CFG_CMDID, &cmd, sizeof(cmd), |
| WMI_PS_DEV_PROFILE_CFG_EVENTID, &reply, sizeof(reply), |
| 100); |
| if (rc) |
| return rc; |
| |
| status = le32_to_cpu(reply.evt.status); |
| |
| if (status != WMI_PS_CFG_CMD_STATUS_SUCCESS) { |
| wil_err(wil, "ps dev profile cfg failed with status %d\n", |
| status); |
| rc = -EINVAL; |
| } |
| |
| return rc; |
| } |
| |
| int wmi_set_mgmt_retry(struct wil6210_priv *wil, u8 retry_short) |
| { |
| int rc; |
| struct wmi_set_mgmt_retry_limit_cmd cmd = { |
| .mgmt_retry_limit = retry_short, |
| }; |
| struct { |
| struct wmi_cmd_hdr wmi; |
| struct wmi_set_mgmt_retry_limit_event evt; |
| } __packed reply; |
| |
| wil_dbg_wmi(wil, "Setting mgmt retry short %d\n", retry_short); |
| |
| if (!test_bit(WMI_FW_CAPABILITY_MGMT_RETRY_LIMIT, wil->fw_capabilities)) |
| return -ENOTSUPP; |
| |
| reply.evt.status = WMI_FW_STATUS_FAILURE; |
| |
| rc = wmi_call(wil, WMI_SET_MGMT_RETRY_LIMIT_CMDID, &cmd, sizeof(cmd), |
| WMI_SET_MGMT_RETRY_LIMIT_EVENTID, &reply, sizeof(reply), |
| 100); |
| if (rc) |
| return rc; |
| |
| if (reply.evt.status != WMI_FW_STATUS_SUCCESS) { |
| wil_err(wil, "set mgmt retry limit failed with status %d\n", |
| reply.evt.status); |
| rc = -EINVAL; |
| } |
| |
| return rc; |
| } |
| |
| int wmi_get_mgmt_retry(struct wil6210_priv *wil, u8 *retry_short) |
| { |
| int rc; |
| struct { |
| struct wmi_cmd_hdr wmi; |
| struct wmi_get_mgmt_retry_limit_event evt; |
| } __packed reply; |
| |
| wil_dbg_wmi(wil, "getting mgmt retry short\n"); |
| |
| if (!test_bit(WMI_FW_CAPABILITY_MGMT_RETRY_LIMIT, wil->fw_capabilities)) |
| return -ENOTSUPP; |
| |
| reply.evt.mgmt_retry_limit = 0; |
| rc = wmi_call(wil, WMI_GET_MGMT_RETRY_LIMIT_CMDID, NULL, 0, |
| WMI_GET_MGMT_RETRY_LIMIT_EVENTID, &reply, sizeof(reply), |
| 100); |
| if (rc) |
| return rc; |
| |
| if (retry_short) |
| *retry_short = reply.evt.mgmt_retry_limit; |
| |
| return 0; |
| } |
| |
| int wmi_abort_scan(struct wil6210_priv *wil) |
| { |
| int rc; |
| |
| wil_dbg_wmi(wil, "sending WMI_ABORT_SCAN_CMDID\n"); |
| |
| rc = wmi_send(wil, WMI_ABORT_SCAN_CMDID, NULL, 0); |
| if (rc) |
| wil_err(wil, "Failed to abort scan (%d)\n", rc); |
| |
| return rc; |
| } |
| |
| int wmi_new_sta(struct wil6210_priv *wil, const u8 *mac, u8 aid) |
| { |
| int rc; |
| struct wmi_new_sta_cmd cmd = { |
| .aid = aid, |
| }; |
| |
| wil_dbg_wmi(wil, "new sta %pM, aid %d\n", mac, aid); |
| |
| ether_addr_copy(cmd.dst_mac, mac); |
| |
| rc = wmi_send(wil, WMI_NEW_STA_CMDID, &cmd, sizeof(cmd)); |
| if (rc) |
| wil_err(wil, "Failed to send new sta (%d)\n", rc); |
| |
| return rc; |
| } |
| |
| void wmi_event_flush(struct wil6210_priv *wil) |
| { |
| ulong flags; |
| struct pending_wmi_event *evt, *t; |
| |
| wil_dbg_wmi(wil, "event_flush\n"); |
| |
| spin_lock_irqsave(&wil->wmi_ev_lock, flags); |
| |
| list_for_each_entry_safe(evt, t, &wil->pending_wmi_ev, list) { |
| list_del(&evt->list); |
| kfree(evt); |
| } |
| |
| spin_unlock_irqrestore(&wil->wmi_ev_lock, flags); |
| } |
| |
| int wmi_suspend(struct wil6210_priv *wil) |
| { |
| int rc; |
| struct wmi_traffic_suspend_cmd cmd = { |
| .wakeup_trigger = wil->wakeup_trigger, |
| }; |
| struct { |
| struct wmi_cmd_hdr wmi; |
| struct wmi_traffic_suspend_event evt; |
| } __packed reply; |
| u32 suspend_to = WIL_WAIT_FOR_SUSPEND_RESUME_COMP; |
| |
| wil->suspend_resp_rcvd = false; |
| wil->suspend_resp_comp = false; |
| |
| reply.evt.status = WMI_TRAFFIC_SUSPEND_REJECTED; |
| |
| rc = wmi_call(wil, WMI_TRAFFIC_SUSPEND_CMDID, &cmd, sizeof(cmd), |
| WMI_TRAFFIC_SUSPEND_EVENTID, &reply, sizeof(reply), |
| suspend_to); |
| if (rc) { |
| wil_err(wil, "wmi_call for suspend req failed, rc=%d\n", rc); |
| if (rc == -ETIME) |
| /* wmi_call TO */ |
| wil->suspend_stats.rejected_by_device++; |
| else |
| wil->suspend_stats.rejected_by_host++; |
| goto out; |
| } |
| |
| wil_dbg_wmi(wil, "waiting for suspend_response_completed\n"); |
| |
| rc = wait_event_interruptible_timeout(wil->wq, |
| wil->suspend_resp_comp, |
| msecs_to_jiffies(suspend_to)); |
| if (rc == 0) { |
| wil_err(wil, "TO waiting for suspend_response_completed\n"); |
| if (wil->suspend_resp_rcvd) |
| /* Device responded but we TO due to another reason */ |
| wil->suspend_stats.rejected_by_host++; |
| else |
| wil->suspend_stats.rejected_by_device++; |
| rc = -EBUSY; |
| goto out; |
| } |
| |
| wil_dbg_wmi(wil, "suspend_response_completed rcvd\n"); |
| if (reply.evt.status == WMI_TRAFFIC_SUSPEND_REJECTED) { |
| wil_dbg_pm(wil, "device rejected the suspend\n"); |
| wil->suspend_stats.rejected_by_device++; |
| } |
| rc = reply.evt.status; |
| |
| out: |
| wil->suspend_resp_rcvd = false; |
| wil->suspend_resp_comp = false; |
| |
| return rc; |
| } |
| |
| int wmi_resume(struct wil6210_priv *wil) |
| { |
| int rc; |
| struct { |
| struct wmi_cmd_hdr wmi; |
| struct wmi_traffic_resume_event evt; |
| } __packed reply; |
| |
| reply.evt.status = WMI_TRAFFIC_RESUME_FAILED; |
| |
| rc = wmi_call(wil, WMI_TRAFFIC_RESUME_CMDID, NULL, 0, |
| WMI_TRAFFIC_RESUME_EVENTID, &reply, sizeof(reply), |
| WIL_WAIT_FOR_SUSPEND_RESUME_COMP); |
| if (rc) |
| return rc; |
| |
| return reply.evt.status; |
| } |
| |
| static bool wmi_evt_call_handler(struct wil6210_priv *wil, int id, |
| void *d, int len) |
| { |
| uint i; |
| |
| for (i = 0; i < ARRAY_SIZE(wmi_evt_handlers); i++) { |
| if (wmi_evt_handlers[i].eventid == id) { |
| wmi_evt_handlers[i].handler(wil, id, d, len); |
| return true; |
| } |
| } |
| |
| return false; |
| } |
| |
| static void wmi_event_handle(struct wil6210_priv *wil, |
| struct wil6210_mbox_hdr *hdr) |
| { |
| u16 len = le16_to_cpu(hdr->len); |
| |
| if ((hdr->type == WIL_MBOX_HDR_TYPE_WMI) && |
| (len >= sizeof(struct wmi_cmd_hdr))) { |
| struct wmi_cmd_hdr *wmi = (void *)(&hdr[1]); |
| void *evt_data = (void *)(&wmi[1]); |
| u16 id = le16_to_cpu(wmi->command_id); |
| |
| wil_dbg_wmi(wil, "Handle WMI 0x%04x (reply_id 0x%04x)\n", |
| id, wil->reply_id); |
| /* check if someone waits for this event */ |
| if (wil->reply_id && wil->reply_id == id) { |
| WARN_ON(wil->reply_buf); |
| wmi_evt_call_handler(wil, id, evt_data, |
| len - sizeof(*wmi)); |
| wil_dbg_wmi(wil, "event_handle: Complete WMI 0x%04x\n", |
| id); |
| complete(&wil->wmi_call); |
| return; |
| } |
| /* unsolicited event */ |
| /* search for handler */ |
| if (!wmi_evt_call_handler(wil, id, evt_data, |
| len - sizeof(*wmi))) { |
| wil_info(wil, "Unhandled event 0x%04x\n", id); |
| } |
| } else { |
| wil_err(wil, "Unknown event type\n"); |
| print_hex_dump(KERN_ERR, "evt?? ", DUMP_PREFIX_OFFSET, 16, 1, |
| hdr, sizeof(*hdr) + len, true); |
| } |
| } |
| |
| /* |
| * Retrieve next WMI event from the pending list |
| */ |
| static struct list_head *next_wmi_ev(struct wil6210_priv *wil) |
| { |
| ulong flags; |
| struct list_head *ret = NULL; |
| |
| spin_lock_irqsave(&wil->wmi_ev_lock, flags); |
| |
| if (!list_empty(&wil->pending_wmi_ev)) { |
| ret = wil->pending_wmi_ev.next; |
| list_del(ret); |
| } |
| |
| spin_unlock_irqrestore(&wil->wmi_ev_lock, flags); |
| |
| return ret; |
| } |
| |
| /* |
| * Handler for the WMI events |
| */ |
| void wmi_event_worker(struct work_struct *work) |
| { |
| struct wil6210_priv *wil = container_of(work, struct wil6210_priv, |
| wmi_event_worker); |
| struct pending_wmi_event *evt; |
| struct list_head *lh; |
| |
| wil_dbg_wmi(wil, "event_worker: Start\n"); |
| while ((lh = next_wmi_ev(wil)) != NULL) { |
| evt = list_entry(lh, struct pending_wmi_event, list); |
| wmi_event_handle(wil, &evt->event.hdr); |
| kfree(evt); |
| } |
| wil_dbg_wmi(wil, "event_worker: Finished\n"); |
| } |
| |
| bool wil_is_wmi_idle(struct wil6210_priv *wil) |
| { |
| ulong flags; |
| struct wil6210_mbox_ring *r = &wil->mbox_ctl.rx; |
| bool rc = false; |
| |
| spin_lock_irqsave(&wil->wmi_ev_lock, flags); |
| |
| /* Check if there are pending WMI events in the events queue */ |
| if (!list_empty(&wil->pending_wmi_ev)) { |
| wil_dbg_pm(wil, "Pending WMI events in queue\n"); |
| goto out; |
| } |
| |
| /* Check if there is a pending WMI call */ |
| if (wil->reply_id) { |
| wil_dbg_pm(wil, "Pending WMI call\n"); |
| goto out; |
| } |
| |
| /* Check if there are pending RX events in mbox */ |
| r->head = wil_r(wil, RGF_MBOX + |
| offsetof(struct wil6210_mbox_ctl, rx.head)); |
| if (r->tail != r->head) |
| wil_dbg_pm(wil, "Pending WMI mbox events\n"); |
| else |
| rc = true; |
| |
| out: |
| spin_unlock_irqrestore(&wil->wmi_ev_lock, flags); |
| return rc; |
| } |