| /* SocketCAN driver for Microchip CAN BUS Analyzer Tool |
| * |
| * Copyright (C) 2017 Mobica Limited |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published |
| * by the Free Software Foundation; version 2 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program. |
| * |
| * This driver is inspired by the 4.6.2 version of net/can/usb/usb_8dev.c |
| */ |
| |
| #include <asm/unaligned.h> |
| #include <linux/can.h> |
| #include <linux/can/dev.h> |
| #include <linux/can/error.h> |
| #include <linux/can/led.h> |
| #include <linux/module.h> |
| #include <linux/netdevice.h> |
| #include <linux/signal.h> |
| #include <linux/slab.h> |
| #include <linux/usb.h> |
| |
| /* vendor and product id */ |
| #define MCBA_MODULE_NAME "mcba_usb" |
| #define MCBA_VENDOR_ID 0x04d8 |
| #define MCBA_PRODUCT_ID 0x0a30 |
| |
| /* driver constants */ |
| #define MCBA_MAX_RX_URBS 20 |
| #define MCBA_MAX_TX_URBS 20 |
| #define MCBA_CTX_FREE MCBA_MAX_TX_URBS |
| |
| /* RX buffer must be bigger than msg size since at the |
| * beggining USB messages are stacked. |
| */ |
| #define MCBA_USB_RX_BUFF_SIZE 64 |
| #define MCBA_USB_TX_BUFF_SIZE (sizeof(struct mcba_usb_msg)) |
| |
| /* Microchip command id */ |
| #define MBCA_CMD_RECEIVE_MESSAGE 0xE3 |
| #define MBCA_CMD_I_AM_ALIVE_FROM_CAN 0xF5 |
| #define MBCA_CMD_I_AM_ALIVE_FROM_USB 0xF7 |
| #define MBCA_CMD_CHANGE_BIT_RATE 0xA1 |
| #define MBCA_CMD_TRANSMIT_MESSAGE_EV 0xA3 |
| #define MBCA_CMD_SETUP_TERMINATION_RESISTANCE 0xA8 |
| #define MBCA_CMD_READ_FW_VERSION 0xA9 |
| #define MBCA_CMD_NOTHING_TO_SEND 0xFF |
| #define MBCA_CMD_TRANSMIT_MESSAGE_RSP 0xE2 |
| |
| #define MCBA_VER_REQ_USB 1 |
| #define MCBA_VER_REQ_CAN 2 |
| |
| /* Drive the CAN_RES signal LOW "0" to activate R24 and R25 */ |
| #define MCBA_VER_TERMINATION_ON 0 |
| #define MCBA_VER_TERMINATION_OFF 1 |
| |
| #define MCBA_SIDL_EXID_MASK 0x8 |
| #define MCBA_DLC_MASK 0xf |
| #define MCBA_DLC_RTR_MASK 0x40 |
| |
| #define MCBA_CAN_STATE_WRN_TH 95 |
| #define MCBA_CAN_STATE_ERR_PSV_TH 127 |
| |
| #define MCBA_TERMINATION_DISABLED CAN_TERMINATION_DISABLED |
| #define MCBA_TERMINATION_ENABLED 120 |
| |
| struct mcba_usb_ctx { |
| struct mcba_priv *priv; |
| u32 ndx; |
| u8 dlc; |
| bool can; |
| }; |
| |
| /* Structure to hold all of our device specific stuff */ |
| struct mcba_priv { |
| struct can_priv can; /* must be the first member */ |
| struct sk_buff *echo_skb[MCBA_MAX_TX_URBS]; |
| struct mcba_usb_ctx tx_context[MCBA_MAX_TX_URBS]; |
| struct usb_device *udev; |
| struct net_device *netdev; |
| struct usb_anchor tx_submitted; |
| struct usb_anchor rx_submitted; |
| struct can_berr_counter bec; |
| bool usb_ka_first_pass; |
| bool can_ka_first_pass; |
| bool can_speed_check; |
| atomic_t free_ctx_cnt; |
| void *rxbuf[MCBA_MAX_RX_URBS]; |
| dma_addr_t rxbuf_dma[MCBA_MAX_RX_URBS]; |
| int rx_pipe; |
| int tx_pipe; |
| }; |
| |
| /* CAN frame */ |
| struct __packed mcba_usb_msg_can { |
| u8 cmd_id; |
| __be16 eid; |
| __be16 sid; |
| u8 dlc; |
| u8 data[8]; |
| u8 timestamp[4]; |
| u8 checksum; |
| }; |
| |
| /* command frame */ |
| struct __packed mcba_usb_msg { |
| u8 cmd_id; |
| u8 unused[18]; |
| }; |
| |
| struct __packed mcba_usb_msg_ka_usb { |
| u8 cmd_id; |
| u8 termination_state; |
| u8 soft_ver_major; |
| u8 soft_ver_minor; |
| u8 unused[15]; |
| }; |
| |
| struct __packed mcba_usb_msg_ka_can { |
| u8 cmd_id; |
| u8 tx_err_cnt; |
| u8 rx_err_cnt; |
| u8 rx_buff_ovfl; |
| u8 tx_bus_off; |
| __be16 can_bitrate; |
| __le16 rx_lost; |
| u8 can_stat; |
| u8 soft_ver_major; |
| u8 soft_ver_minor; |
| u8 debug_mode; |
| u8 test_complete; |
| u8 test_result; |
| u8 unused[4]; |
| }; |
| |
| struct __packed mcba_usb_msg_change_bitrate { |
| u8 cmd_id; |
| __be16 bitrate; |
| u8 unused[16]; |
| }; |
| |
| struct __packed mcba_usb_msg_termination { |
| u8 cmd_id; |
| u8 termination; |
| u8 unused[17]; |
| }; |
| |
| struct __packed mcba_usb_msg_fw_ver { |
| u8 cmd_id; |
| u8 pic; |
| u8 unused[17]; |
| }; |
| |
| static const struct usb_device_id mcba_usb_table[] = { |
| { USB_DEVICE(MCBA_VENDOR_ID, MCBA_PRODUCT_ID) }, |
| {} /* Terminating entry */ |
| }; |
| |
| MODULE_DEVICE_TABLE(usb, mcba_usb_table); |
| |
| static const u16 mcba_termination[] = { MCBA_TERMINATION_DISABLED, |
| MCBA_TERMINATION_ENABLED }; |
| |
| static const u32 mcba_bitrate[] = { 20000, 33333, 50000, 80000, 83333, |
| 100000, 125000, 150000, 175000, 200000, |
| 225000, 250000, 275000, 300000, 500000, |
| 625000, 800000, 1000000 }; |
| |
| static inline void mcba_init_ctx(struct mcba_priv *priv) |
| { |
| int i = 0; |
| |
| for (i = 0; i < MCBA_MAX_TX_URBS; i++) { |
| priv->tx_context[i].ndx = MCBA_CTX_FREE; |
| priv->tx_context[i].priv = priv; |
| } |
| |
| atomic_set(&priv->free_ctx_cnt, ARRAY_SIZE(priv->tx_context)); |
| } |
| |
| static inline struct mcba_usb_ctx *mcba_usb_get_free_ctx(struct mcba_priv *priv, |
| struct can_frame *cf) |
| { |
| int i = 0; |
| struct mcba_usb_ctx *ctx = NULL; |
| |
| for (i = 0; i < MCBA_MAX_TX_URBS; i++) { |
| if (priv->tx_context[i].ndx == MCBA_CTX_FREE) { |
| ctx = &priv->tx_context[i]; |
| ctx->ndx = i; |
| |
| if (cf) { |
| ctx->can = true; |
| ctx->dlc = cf->can_dlc; |
| } else { |
| ctx->can = false; |
| ctx->dlc = 0; |
| } |
| |
| atomic_dec(&priv->free_ctx_cnt); |
| break; |
| } |
| } |
| |
| if (!atomic_read(&priv->free_ctx_cnt)) |
| /* That was the last free ctx. Slow down tx path */ |
| netif_stop_queue(priv->netdev); |
| |
| return ctx; |
| } |
| |
| /* mcba_usb_free_ctx and mcba_usb_get_free_ctx are executed by different |
| * threads. The order of execution in below function is important. |
| */ |
| static inline void mcba_usb_free_ctx(struct mcba_usb_ctx *ctx) |
| { |
| /* Increase number of free ctxs before freeing ctx */ |
| atomic_inc(&ctx->priv->free_ctx_cnt); |
| |
| ctx->ndx = MCBA_CTX_FREE; |
| |
| /* Wake up the queue once ctx is marked free */ |
| netif_wake_queue(ctx->priv->netdev); |
| } |
| |
| static void mcba_usb_write_bulk_callback(struct urb *urb) |
| { |
| struct mcba_usb_ctx *ctx = urb->context; |
| struct net_device *netdev; |
| |
| WARN_ON(!ctx); |
| |
| netdev = ctx->priv->netdev; |
| |
| /* free up our allocated buffer */ |
| usb_free_coherent(urb->dev, urb->transfer_buffer_length, |
| urb->transfer_buffer, urb->transfer_dma); |
| |
| if (ctx->can) { |
| if (!netif_device_present(netdev)) |
| return; |
| |
| netdev->stats.tx_packets++; |
| netdev->stats.tx_bytes += ctx->dlc; |
| |
| can_led_event(netdev, CAN_LED_EVENT_TX); |
| can_get_echo_skb(netdev, ctx->ndx); |
| } |
| |
| if (urb->status) |
| netdev_info(netdev, "Tx URB aborted (%d)\n", urb->status); |
| |
| /* Release the context */ |
| mcba_usb_free_ctx(ctx); |
| } |
| |
| /* Send data to device */ |
| static netdev_tx_t mcba_usb_xmit(struct mcba_priv *priv, |
| struct mcba_usb_msg *usb_msg, |
| struct mcba_usb_ctx *ctx) |
| { |
| struct urb *urb; |
| u8 *buf; |
| int err; |
| |
| /* create a URB, and a buffer for it, and copy the data to the URB */ |
| urb = usb_alloc_urb(0, GFP_ATOMIC); |
| if (!urb) |
| return -ENOMEM; |
| |
| buf = usb_alloc_coherent(priv->udev, MCBA_USB_TX_BUFF_SIZE, GFP_ATOMIC, |
| &urb->transfer_dma); |
| if (!buf) { |
| err = -ENOMEM; |
| goto nomembuf; |
| } |
| |
| memcpy(buf, usb_msg, MCBA_USB_TX_BUFF_SIZE); |
| |
| usb_fill_bulk_urb(urb, priv->udev, priv->tx_pipe, buf, MCBA_USB_TX_BUFF_SIZE, |
| mcba_usb_write_bulk_callback, ctx); |
| |
| urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; |
| usb_anchor_urb(urb, &priv->tx_submitted); |
| |
| err = usb_submit_urb(urb, GFP_ATOMIC); |
| if (unlikely(err)) |
| goto failed; |
| |
| /* Release our reference to this URB, the USB core will eventually free |
| * it entirely. |
| */ |
| usb_free_urb(urb); |
| |
| return 0; |
| |
| failed: |
| usb_unanchor_urb(urb); |
| usb_free_coherent(priv->udev, MCBA_USB_TX_BUFF_SIZE, buf, |
| urb->transfer_dma); |
| |
| if (err == -ENODEV) |
| netif_device_detach(priv->netdev); |
| else |
| netdev_warn(priv->netdev, "failed tx_urb %d\n", err); |
| |
| nomembuf: |
| usb_free_urb(urb); |
| |
| return err; |
| } |
| |
| /* Send data to device */ |
| static netdev_tx_t mcba_usb_start_xmit(struct sk_buff *skb, |
| struct net_device *netdev) |
| { |
| struct mcba_priv *priv = netdev_priv(netdev); |
| struct can_frame *cf = (struct can_frame *)skb->data; |
| struct mcba_usb_ctx *ctx = NULL; |
| struct net_device_stats *stats = &priv->netdev->stats; |
| u16 sid; |
| int err; |
| struct mcba_usb_msg_can usb_msg = { |
| .cmd_id = MBCA_CMD_TRANSMIT_MESSAGE_EV |
| }; |
| |
| if (can_dropped_invalid_skb(netdev, skb)) |
| return NETDEV_TX_OK; |
| |
| ctx = mcba_usb_get_free_ctx(priv, cf); |
| if (!ctx) |
| return NETDEV_TX_BUSY; |
| |
| if (cf->can_id & CAN_EFF_FLAG) { |
| /* SIDH | SIDL | EIDH | EIDL |
| * 28 - 21 | 20 19 18 x x x 17 16 | 15 - 8 | 7 - 0 |
| */ |
| sid = MCBA_SIDL_EXID_MASK; |
| /* store 28-18 bits */ |
| sid |= (cf->can_id & 0x1ffc0000) >> 13; |
| /* store 17-16 bits */ |
| sid |= (cf->can_id & 0x30000) >> 16; |
| put_unaligned_be16(sid, &usb_msg.sid); |
| |
| /* store 15-0 bits */ |
| put_unaligned_be16(cf->can_id & 0xffff, &usb_msg.eid); |
| } else { |
| /* SIDH | SIDL |
| * 10 - 3 | 2 1 0 x x x x x |
| */ |
| put_unaligned_be16((cf->can_id & CAN_SFF_MASK) << 5, |
| &usb_msg.sid); |
| usb_msg.eid = 0; |
| } |
| |
| usb_msg.dlc = cf->can_dlc; |
| |
| memcpy(usb_msg.data, cf->data, usb_msg.dlc); |
| |
| if (cf->can_id & CAN_RTR_FLAG) |
| usb_msg.dlc |= MCBA_DLC_RTR_MASK; |
| |
| can_put_echo_skb(skb, priv->netdev, ctx->ndx); |
| |
| err = mcba_usb_xmit(priv, (struct mcba_usb_msg *)&usb_msg, ctx); |
| if (err) |
| goto xmit_failed; |
| |
| return NETDEV_TX_OK; |
| |
| xmit_failed: |
| can_free_echo_skb(priv->netdev, ctx->ndx); |
| mcba_usb_free_ctx(ctx); |
| stats->tx_dropped++; |
| |
| return NETDEV_TX_OK; |
| } |
| |
| /* Send cmd to device */ |
| static void mcba_usb_xmit_cmd(struct mcba_priv *priv, |
| struct mcba_usb_msg *usb_msg) |
| { |
| struct mcba_usb_ctx *ctx = NULL; |
| int err; |
| |
| ctx = mcba_usb_get_free_ctx(priv, NULL); |
| if (!ctx) { |
| netdev_err(priv->netdev, |
| "Lack of free ctx. Sending (%d) cmd aborted", |
| usb_msg->cmd_id); |
| |
| return; |
| } |
| |
| err = mcba_usb_xmit(priv, usb_msg, ctx); |
| if (err) |
| netdev_err(priv->netdev, "Failed to send cmd (%d)", |
| usb_msg->cmd_id); |
| } |
| |
| static void mcba_usb_xmit_change_bitrate(struct mcba_priv *priv, u16 bitrate) |
| { |
| struct mcba_usb_msg_change_bitrate usb_msg = { |
| .cmd_id = MBCA_CMD_CHANGE_BIT_RATE |
| }; |
| |
| put_unaligned_be16(bitrate, &usb_msg.bitrate); |
| |
| mcba_usb_xmit_cmd(priv, (struct mcba_usb_msg *)&usb_msg); |
| } |
| |
| static void mcba_usb_xmit_read_fw_ver(struct mcba_priv *priv, u8 pic) |
| { |
| struct mcba_usb_msg_fw_ver usb_msg = { |
| .cmd_id = MBCA_CMD_READ_FW_VERSION, |
| .pic = pic |
| }; |
| |
| mcba_usb_xmit_cmd(priv, (struct mcba_usb_msg *)&usb_msg); |
| } |
| |
| static void mcba_usb_process_can(struct mcba_priv *priv, |
| struct mcba_usb_msg_can *msg) |
| { |
| struct can_frame *cf; |
| struct sk_buff *skb; |
| struct net_device_stats *stats = &priv->netdev->stats; |
| u16 sid; |
| |
| skb = alloc_can_skb(priv->netdev, &cf); |
| if (!skb) |
| return; |
| |
| sid = get_unaligned_be16(&msg->sid); |
| |
| if (sid & MCBA_SIDL_EXID_MASK) { |
| /* SIDH | SIDL | EIDH | EIDL |
| * 28 - 21 | 20 19 18 x x x 17 16 | 15 - 8 | 7 - 0 |
| */ |
| cf->can_id = CAN_EFF_FLAG; |
| |
| /* store 28-18 bits */ |
| cf->can_id |= (sid & 0xffe0) << 13; |
| /* store 17-16 bits */ |
| cf->can_id |= (sid & 3) << 16; |
| /* store 15-0 bits */ |
| cf->can_id |= get_unaligned_be16(&msg->eid); |
| } else { |
| /* SIDH | SIDL |
| * 10 - 3 | 2 1 0 x x x x x |
| */ |
| cf->can_id = (sid & 0xffe0) >> 5; |
| } |
| |
| if (msg->dlc & MCBA_DLC_RTR_MASK) |
| cf->can_id |= CAN_RTR_FLAG; |
| |
| cf->can_dlc = get_can_dlc(msg->dlc & MCBA_DLC_MASK); |
| |
| memcpy(cf->data, msg->data, cf->can_dlc); |
| |
| stats->rx_packets++; |
| stats->rx_bytes += cf->can_dlc; |
| |
| can_led_event(priv->netdev, CAN_LED_EVENT_RX); |
| netif_rx(skb); |
| } |
| |
| static void mcba_usb_process_ka_usb(struct mcba_priv *priv, |
| struct mcba_usb_msg_ka_usb *msg) |
| { |
| if (unlikely(priv->usb_ka_first_pass)) { |
| netdev_info(priv->netdev, "PIC USB version %hhu.%hhu\n", |
| msg->soft_ver_major, msg->soft_ver_minor); |
| |
| priv->usb_ka_first_pass = false; |
| } |
| |
| if (msg->termination_state == MCBA_VER_TERMINATION_ON) |
| priv->can.termination = MCBA_TERMINATION_ENABLED; |
| else |
| priv->can.termination = MCBA_TERMINATION_DISABLED; |
| } |
| |
| static u32 convert_can2host_bitrate(struct mcba_usb_msg_ka_can *msg) |
| { |
| const u32 bitrate = get_unaligned_be16(&msg->can_bitrate); |
| |
| if ((bitrate == 33) || (bitrate == 83)) |
| return bitrate * 1000 + 333; |
| else |
| return bitrate * 1000; |
| } |
| |
| static void mcba_usb_process_ka_can(struct mcba_priv *priv, |
| struct mcba_usb_msg_ka_can *msg) |
| { |
| if (unlikely(priv->can_ka_first_pass)) { |
| netdev_info(priv->netdev, "PIC CAN version %hhu.%hhu\n", |
| msg->soft_ver_major, msg->soft_ver_minor); |
| |
| priv->can_ka_first_pass = false; |
| } |
| |
| if (unlikely(priv->can_speed_check)) { |
| const u32 bitrate = convert_can2host_bitrate(msg); |
| |
| priv->can_speed_check = false; |
| |
| if (bitrate != priv->can.bittiming.bitrate) |
| netdev_err( |
| priv->netdev, |
| "Wrong bitrate reported by the device (%u). Expected %u", |
| bitrate, priv->can.bittiming.bitrate); |
| } |
| |
| priv->bec.txerr = msg->tx_err_cnt; |
| priv->bec.rxerr = msg->rx_err_cnt; |
| |
| if (msg->tx_bus_off) |
| priv->can.state = CAN_STATE_BUS_OFF; |
| |
| else if ((priv->bec.txerr > MCBA_CAN_STATE_ERR_PSV_TH) || |
| (priv->bec.rxerr > MCBA_CAN_STATE_ERR_PSV_TH)) |
| priv->can.state = CAN_STATE_ERROR_PASSIVE; |
| |
| else if ((priv->bec.txerr > MCBA_CAN_STATE_WRN_TH) || |
| (priv->bec.rxerr > MCBA_CAN_STATE_WRN_TH)) |
| priv->can.state = CAN_STATE_ERROR_WARNING; |
| } |
| |
| static void mcba_usb_process_rx(struct mcba_priv *priv, |
| struct mcba_usb_msg *msg) |
| { |
| switch (msg->cmd_id) { |
| case MBCA_CMD_I_AM_ALIVE_FROM_CAN: |
| mcba_usb_process_ka_can(priv, |
| (struct mcba_usb_msg_ka_can *)msg); |
| break; |
| |
| case MBCA_CMD_I_AM_ALIVE_FROM_USB: |
| mcba_usb_process_ka_usb(priv, |
| (struct mcba_usb_msg_ka_usb *)msg); |
| break; |
| |
| case MBCA_CMD_RECEIVE_MESSAGE: |
| mcba_usb_process_can(priv, (struct mcba_usb_msg_can *)msg); |
| break; |
| |
| case MBCA_CMD_NOTHING_TO_SEND: |
| /* Side effect of communication between PIC_USB and PIC_CAN. |
| * PIC_CAN is telling us that it has nothing to send |
| */ |
| break; |
| |
| case MBCA_CMD_TRANSMIT_MESSAGE_RSP: |
| /* Transmission response from the device containing timestamp */ |
| break; |
| |
| default: |
| netdev_warn(priv->netdev, "Unsupported msg (0x%hhX)", |
| msg->cmd_id); |
| break; |
| } |
| } |
| |
| /* Callback for reading data from device |
| * |
| * Check urb status, call read function and resubmit urb read operation. |
| */ |
| static void mcba_usb_read_bulk_callback(struct urb *urb) |
| { |
| struct mcba_priv *priv = urb->context; |
| struct net_device *netdev; |
| int retval; |
| int pos = 0; |
| |
| netdev = priv->netdev; |
| |
| if (!netif_device_present(netdev)) |
| return; |
| |
| switch (urb->status) { |
| case 0: /* success */ |
| break; |
| |
| case -ENOENT: |
| case -EPIPE: |
| case -EPROTO: |
| case -ESHUTDOWN: |
| return; |
| |
| default: |
| netdev_info(netdev, "Rx URB aborted (%d)\n", urb->status); |
| |
| goto resubmit_urb; |
| } |
| |
| while (pos < urb->actual_length) { |
| struct mcba_usb_msg *msg; |
| |
| if (pos + sizeof(struct mcba_usb_msg) > urb->actual_length) { |
| netdev_err(priv->netdev, "format error\n"); |
| break; |
| } |
| |
| msg = (struct mcba_usb_msg *)(urb->transfer_buffer + pos); |
| mcba_usb_process_rx(priv, msg); |
| |
| pos += sizeof(struct mcba_usb_msg); |
| } |
| |
| resubmit_urb: |
| |
| usb_fill_bulk_urb(urb, priv->udev, |
| priv->rx_pipe, |
| urb->transfer_buffer, MCBA_USB_RX_BUFF_SIZE, |
| mcba_usb_read_bulk_callback, priv); |
| |
| retval = usb_submit_urb(urb, GFP_ATOMIC); |
| |
| if (retval == -ENODEV) |
| netif_device_detach(netdev); |
| else if (retval) |
| netdev_err(netdev, "failed resubmitting read bulk urb: %d\n", |
| retval); |
| } |
| |
| /* Start USB device */ |
| static int mcba_usb_start(struct mcba_priv *priv) |
| { |
| struct net_device *netdev = priv->netdev; |
| int err, i; |
| |
| mcba_init_ctx(priv); |
| |
| for (i = 0; i < MCBA_MAX_RX_URBS; i++) { |
| struct urb *urb = NULL; |
| u8 *buf; |
| dma_addr_t buf_dma; |
| |
| /* create a URB, and a buffer for it */ |
| urb = usb_alloc_urb(0, GFP_KERNEL); |
| if (!urb) { |
| err = -ENOMEM; |
| break; |
| } |
| |
| buf = usb_alloc_coherent(priv->udev, MCBA_USB_RX_BUFF_SIZE, |
| GFP_KERNEL, &buf_dma); |
| if (!buf) { |
| netdev_err(netdev, "No memory left for USB buffer\n"); |
| usb_free_urb(urb); |
| err = -ENOMEM; |
| break; |
| } |
| |
| urb->transfer_dma = buf_dma; |
| |
| usb_fill_bulk_urb(urb, priv->udev, |
| priv->rx_pipe, |
| buf, MCBA_USB_RX_BUFF_SIZE, |
| mcba_usb_read_bulk_callback, priv); |
| urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; |
| usb_anchor_urb(urb, &priv->rx_submitted); |
| |
| err = usb_submit_urb(urb, GFP_KERNEL); |
| if (err) { |
| usb_unanchor_urb(urb); |
| usb_free_coherent(priv->udev, MCBA_USB_RX_BUFF_SIZE, |
| buf, buf_dma); |
| usb_free_urb(urb); |
| break; |
| } |
| |
| priv->rxbuf[i] = buf; |
| priv->rxbuf_dma[i] = buf_dma; |
| |
| /* Drop reference, USB core will take care of freeing it */ |
| usb_free_urb(urb); |
| } |
| |
| /* Did we submit any URBs */ |
| if (i == 0) { |
| netdev_warn(netdev, "couldn't setup read URBs\n"); |
| return err; |
| } |
| |
| /* Warn if we've couldn't transmit all the URBs */ |
| if (i < MCBA_MAX_RX_URBS) |
| netdev_warn(netdev, "rx performance may be slow\n"); |
| |
| mcba_usb_xmit_read_fw_ver(priv, MCBA_VER_REQ_USB); |
| mcba_usb_xmit_read_fw_ver(priv, MCBA_VER_REQ_CAN); |
| |
| return err; |
| } |
| |
| /* Open USB device */ |
| static int mcba_usb_open(struct net_device *netdev) |
| { |
| struct mcba_priv *priv = netdev_priv(netdev); |
| int err; |
| |
| /* common open */ |
| err = open_candev(netdev); |
| if (err) |
| return err; |
| |
| priv->can_speed_check = true; |
| priv->can.state = CAN_STATE_ERROR_ACTIVE; |
| |
| can_led_event(netdev, CAN_LED_EVENT_OPEN); |
| netif_start_queue(netdev); |
| |
| return 0; |
| } |
| |
| static void mcba_urb_unlink(struct mcba_priv *priv) |
| { |
| int i; |
| |
| usb_kill_anchored_urbs(&priv->rx_submitted); |
| |
| for (i = 0; i < MCBA_MAX_RX_URBS; ++i) |
| usb_free_coherent(priv->udev, MCBA_USB_RX_BUFF_SIZE, |
| priv->rxbuf[i], priv->rxbuf_dma[i]); |
| |
| usb_kill_anchored_urbs(&priv->tx_submitted); |
| } |
| |
| /* Close USB device */ |
| static int mcba_usb_close(struct net_device *netdev) |
| { |
| struct mcba_priv *priv = netdev_priv(netdev); |
| |
| priv->can.state = CAN_STATE_STOPPED; |
| |
| netif_stop_queue(netdev); |
| |
| /* Stop polling */ |
| mcba_urb_unlink(priv); |
| |
| close_candev(netdev); |
| can_led_event(netdev, CAN_LED_EVENT_STOP); |
| |
| return 0; |
| } |
| |
| /* Set network device mode |
| * |
| * Maybe we should leave this function empty, because the device |
| * set mode variable with open command. |
| */ |
| static int mcba_net_set_mode(struct net_device *netdev, enum can_mode mode) |
| { |
| return 0; |
| } |
| |
| static int mcba_net_get_berr_counter(const struct net_device *netdev, |
| struct can_berr_counter *bec) |
| { |
| struct mcba_priv *priv = netdev_priv(netdev); |
| |
| bec->txerr = priv->bec.txerr; |
| bec->rxerr = priv->bec.rxerr; |
| |
| return 0; |
| } |
| |
| static const struct net_device_ops mcba_netdev_ops = { |
| .ndo_open = mcba_usb_open, |
| .ndo_stop = mcba_usb_close, |
| .ndo_start_xmit = mcba_usb_start_xmit, |
| }; |
| |
| /* Microchip CANBUS has hardcoded bittiming values by default. |
| * This function sends request via USB to change the speed and align bittiming |
| * values for presentation purposes only |
| */ |
| static int mcba_net_set_bittiming(struct net_device *netdev) |
| { |
| struct mcba_priv *priv = netdev_priv(netdev); |
| const u16 bitrate_kbps = priv->can.bittiming.bitrate / 1000; |
| |
| mcba_usb_xmit_change_bitrate(priv, bitrate_kbps); |
| |
| return 0; |
| } |
| |
| static int mcba_set_termination(struct net_device *netdev, u16 term) |
| { |
| struct mcba_priv *priv = netdev_priv(netdev); |
| struct mcba_usb_msg_termination usb_msg = { |
| .cmd_id = MBCA_CMD_SETUP_TERMINATION_RESISTANCE |
| }; |
| |
| if (term == MCBA_TERMINATION_ENABLED) |
| usb_msg.termination = MCBA_VER_TERMINATION_ON; |
| else |
| usb_msg.termination = MCBA_VER_TERMINATION_OFF; |
| |
| mcba_usb_xmit_cmd(priv, (struct mcba_usb_msg *)&usb_msg); |
| |
| return 0; |
| } |
| |
| static int mcba_usb_probe(struct usb_interface *intf, |
| const struct usb_device_id *id) |
| { |
| struct net_device *netdev; |
| struct mcba_priv *priv; |
| int err = -ENOMEM; |
| struct usb_device *usbdev = interface_to_usbdev(intf); |
| struct usb_endpoint_descriptor *in, *out; |
| |
| err = usb_find_common_endpoints(intf->cur_altsetting, &in, &out, NULL, NULL); |
| if (err) { |
| dev_err(&intf->dev, "Can't find endpoints\n"); |
| return err; |
| } |
| |
| netdev = alloc_candev(sizeof(struct mcba_priv), MCBA_MAX_TX_URBS); |
| if (!netdev) { |
| dev_err(&intf->dev, "Couldn't alloc candev\n"); |
| return -ENOMEM; |
| } |
| |
| priv = netdev_priv(netdev); |
| |
| priv->udev = usbdev; |
| priv->netdev = netdev; |
| priv->usb_ka_first_pass = true; |
| priv->can_ka_first_pass = true; |
| priv->can_speed_check = false; |
| |
| init_usb_anchor(&priv->rx_submitted); |
| init_usb_anchor(&priv->tx_submitted); |
| |
| usb_set_intfdata(intf, priv); |
| |
| /* Init CAN device */ |
| priv->can.state = CAN_STATE_STOPPED; |
| priv->can.termination_const = mcba_termination; |
| priv->can.termination_const_cnt = ARRAY_SIZE(mcba_termination); |
| priv->can.bitrate_const = mcba_bitrate; |
| priv->can.bitrate_const_cnt = ARRAY_SIZE(mcba_bitrate); |
| |
| priv->can.do_set_termination = mcba_set_termination; |
| priv->can.do_set_mode = mcba_net_set_mode; |
| priv->can.do_get_berr_counter = mcba_net_get_berr_counter; |
| priv->can.do_set_bittiming = mcba_net_set_bittiming; |
| |
| netdev->netdev_ops = &mcba_netdev_ops; |
| |
| netdev->flags |= IFF_ECHO; /* we support local echo */ |
| |
| SET_NETDEV_DEV(netdev, &intf->dev); |
| |
| err = register_candev(netdev); |
| if (err) { |
| netdev_err(netdev, "couldn't register CAN device: %d\n", err); |
| |
| goto cleanup_free_candev; |
| } |
| |
| priv->rx_pipe = usb_rcvbulkpipe(priv->udev, in->bEndpointAddress); |
| priv->tx_pipe = usb_sndbulkpipe(priv->udev, out->bEndpointAddress); |
| |
| devm_can_led_init(netdev); |
| |
| /* Start USB dev only if we have successfully registered CAN device */ |
| err = mcba_usb_start(priv); |
| if (err) { |
| if (err == -ENODEV) |
| netif_device_detach(priv->netdev); |
| |
| netdev_warn(netdev, "couldn't start device: %d\n", err); |
| |
| goto cleanup_unregister_candev; |
| } |
| |
| dev_info(&intf->dev, "Microchip CAN BUS analizer connected\n"); |
| |
| return 0; |
| |
| cleanup_unregister_candev: |
| unregister_candev(priv->netdev); |
| |
| cleanup_free_candev: |
| free_candev(netdev); |
| |
| return err; |
| } |
| |
| /* Called by the usb core when driver is unloaded or device is removed */ |
| static void mcba_usb_disconnect(struct usb_interface *intf) |
| { |
| struct mcba_priv *priv = usb_get_intfdata(intf); |
| |
| usb_set_intfdata(intf, NULL); |
| |
| netdev_info(priv->netdev, "device disconnected\n"); |
| |
| unregister_candev(priv->netdev); |
| mcba_urb_unlink(priv); |
| free_candev(priv->netdev); |
| } |
| |
| static struct usb_driver mcba_usb_driver = { |
| .name = MCBA_MODULE_NAME, |
| .probe = mcba_usb_probe, |
| .disconnect = mcba_usb_disconnect, |
| .id_table = mcba_usb_table, |
| }; |
| |
| module_usb_driver(mcba_usb_driver); |
| |
| MODULE_AUTHOR("Remigiusz Kołłątaj <remigiusz.kollataj@mobica.com>"); |
| MODULE_DESCRIPTION("SocketCAN driver for Microchip CAN BUS Analyzer Tool"); |
| MODULE_LICENSE("GPL v2"); |