| /****************************************************************************** |
| * |
| * Copyright(c) 2007 - 2012 Intel Corporation. All rights reserved. |
| * |
| * Portions of this file are derived from the ipw3945 project, as well |
| * as portions of the ieee80211 subsystem header files. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of version 2 of the GNU General Public License as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * You should have received a copy of the GNU General Public License along with |
| * this program; if not, write to the Free Software Foundation, Inc., |
| * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA |
| * |
| * The full GNU General Public License is included in this distribution in the |
| * file called LICENSE. |
| * |
| * Contact Information: |
| * Intel Linux Wireless <ilw@linux.intel.com> |
| * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 |
| *****************************************************************************/ |
| |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| #include <linux/init.h> |
| |
| #include <net/mac80211.h> |
| |
| #include "iwl-eeprom.h" |
| #include "iwl-dev.h" |
| #include "iwl-agn.h" |
| #include "iwl-io.h" |
| #include "iwl-commands.h" |
| #include "iwl-debug.h" |
| #include "iwl-power.h" |
| #include "iwl-trans.h" |
| #include "iwl-modparams.h" |
| |
| /* |
| * Setting power level allows the card to go to sleep when not busy. |
| * |
| * We calculate a sleep command based on the required latency, which |
| * we get from mac80211. In order to handle thermal throttling, we can |
| * also use pre-defined power levels. |
| */ |
| |
| /* |
| * This defines the old power levels. They are still used by default |
| * (level 1) and for thermal throttle (levels 3 through 5) |
| */ |
| |
| struct iwl_power_vec_entry { |
| struct iwl_powertable_cmd cmd; |
| u8 no_dtim; /* number of skip dtim */ |
| }; |
| |
| #define IWL_DTIM_RANGE_0_MAX 2 |
| #define IWL_DTIM_RANGE_1_MAX 10 |
| |
| #define NOSLP cpu_to_le16(0), 0, 0 |
| #define SLP IWL_POWER_DRIVER_ALLOW_SLEEP_MSK, 0, 0 |
| #define ASLP (IWL_POWER_POWER_SAVE_ENA_MSK | \ |
| IWL_POWER_POWER_MANAGEMENT_ENA_MSK | \ |
| IWL_POWER_ADVANCE_PM_ENA_MSK) |
| #define ASLP_TOUT(T) cpu_to_le32(T) |
| #define TU_TO_USEC 1024 |
| #define SLP_TOUT(T) cpu_to_le32((T) * TU_TO_USEC) |
| #define SLP_VEC(X0, X1, X2, X3, X4) {cpu_to_le32(X0), \ |
| cpu_to_le32(X1), \ |
| cpu_to_le32(X2), \ |
| cpu_to_le32(X3), \ |
| cpu_to_le32(X4)} |
| /* default power management (not Tx power) table values */ |
| /* for DTIM period 0 through IWL_DTIM_RANGE_0_MAX */ |
| /* DTIM 0 - 2 */ |
| static const struct iwl_power_vec_entry range_0[IWL_POWER_NUM] = { |
| {{SLP, SLP_TOUT(200), SLP_TOUT(500), SLP_VEC(1, 1, 2, 2, 0xFF)}, 0}, |
| {{SLP, SLP_TOUT(200), SLP_TOUT(300), SLP_VEC(1, 2, 2, 2, 0xFF)}, 0}, |
| {{SLP, SLP_TOUT(50), SLP_TOUT(100), SLP_VEC(2, 2, 2, 2, 0xFF)}, 0}, |
| {{SLP, SLP_TOUT(50), SLP_TOUT(25), SLP_VEC(2, 2, 4, 4, 0xFF)}, 1}, |
| {{SLP, SLP_TOUT(25), SLP_TOUT(25), SLP_VEC(2, 2, 4, 6, 0xFF)}, 2} |
| }; |
| |
| |
| /* for DTIM period IWL_DTIM_RANGE_0_MAX + 1 through IWL_DTIM_RANGE_1_MAX */ |
| /* DTIM 3 - 10 */ |
| static const struct iwl_power_vec_entry range_1[IWL_POWER_NUM] = { |
| {{SLP, SLP_TOUT(200), SLP_TOUT(500), SLP_VEC(1, 2, 3, 4, 4)}, 0}, |
| {{SLP, SLP_TOUT(200), SLP_TOUT(300), SLP_VEC(1, 2, 3, 4, 7)}, 0}, |
| {{SLP, SLP_TOUT(50), SLP_TOUT(100), SLP_VEC(2, 4, 6, 7, 9)}, 0}, |
| {{SLP, SLP_TOUT(50), SLP_TOUT(25), SLP_VEC(2, 4, 6, 9, 10)}, 1}, |
| {{SLP, SLP_TOUT(25), SLP_TOUT(25), SLP_VEC(2, 4, 6, 10, 10)}, 2} |
| }; |
| |
| /* for DTIM period > IWL_DTIM_RANGE_1_MAX */ |
| /* DTIM 11 - */ |
| static const struct iwl_power_vec_entry range_2[IWL_POWER_NUM] = { |
| {{SLP, SLP_TOUT(200), SLP_TOUT(500), SLP_VEC(1, 2, 3, 4, 0xFF)}, 0}, |
| {{SLP, SLP_TOUT(200), SLP_TOUT(300), SLP_VEC(2, 4, 6, 7, 0xFF)}, 0}, |
| {{SLP, SLP_TOUT(50), SLP_TOUT(100), SLP_VEC(2, 7, 9, 9, 0xFF)}, 0}, |
| {{SLP, SLP_TOUT(50), SLP_TOUT(25), SLP_VEC(2, 7, 9, 9, 0xFF)}, 0}, |
| {{SLP, SLP_TOUT(25), SLP_TOUT(25), SLP_VEC(4, 7, 10, 10, 0xFF)}, 0} |
| }; |
| |
| /* advance power management */ |
| /* DTIM 0 - 2 */ |
| static const struct iwl_power_vec_entry apm_range_0[IWL_POWER_NUM] = { |
| {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50), |
| SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0}, |
| {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50), |
| SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0}, |
| {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50), |
| SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0}, |
| {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50), |
| SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0}, |
| {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50), |
| SLP_VEC(1, 2, 6, 8, 0xFF), ASLP_TOUT(2)}, 2} |
| }; |
| |
| |
| /* for DTIM period IWL_DTIM_RANGE_0_MAX + 1 through IWL_DTIM_RANGE_1_MAX */ |
| /* DTIM 3 - 10 */ |
| static const struct iwl_power_vec_entry apm_range_1[IWL_POWER_NUM] = { |
| {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50), |
| SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0}, |
| {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50), |
| SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0}, |
| {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50), |
| SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0}, |
| {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50), |
| SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0}, |
| {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50), |
| SLP_VEC(1, 2, 6, 8, 0xFF), 0}, 2} |
| }; |
| |
| /* for DTIM period > IWL_DTIM_RANGE_1_MAX */ |
| /* DTIM 11 - */ |
| static const struct iwl_power_vec_entry apm_range_2[IWL_POWER_NUM] = { |
| {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50), |
| SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0}, |
| {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50), |
| SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0}, |
| {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50), |
| SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0}, |
| {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50), |
| SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0}, |
| {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50), |
| SLP_VEC(1, 2, 6, 8, 0xFF), ASLP_TOUT(2)}, 2} |
| }; |
| |
| static void iwl_static_sleep_cmd(struct iwl_priv *priv, |
| struct iwl_powertable_cmd *cmd, |
| enum iwl_power_level lvl, int period) |
| { |
| const struct iwl_power_vec_entry *table; |
| int max_sleep[IWL_POWER_VEC_SIZE] = { 0 }; |
| int i; |
| u8 skip; |
| u32 slp_itrvl; |
| |
| if (priv->cfg->adv_pm) { |
| table = apm_range_2; |
| if (period <= IWL_DTIM_RANGE_1_MAX) |
| table = apm_range_1; |
| if (period <= IWL_DTIM_RANGE_0_MAX) |
| table = apm_range_0; |
| } else { |
| table = range_2; |
| if (period <= IWL_DTIM_RANGE_1_MAX) |
| table = range_1; |
| if (period <= IWL_DTIM_RANGE_0_MAX) |
| table = range_0; |
| } |
| |
| if (WARN_ON(lvl < 0 || lvl >= IWL_POWER_NUM)) |
| memset(cmd, 0, sizeof(*cmd)); |
| else |
| *cmd = table[lvl].cmd; |
| |
| if (period == 0) { |
| skip = 0; |
| period = 1; |
| for (i = 0; i < IWL_POWER_VEC_SIZE; i++) |
| max_sleep[i] = 1; |
| |
| } else { |
| skip = table[lvl].no_dtim; |
| for (i = 0; i < IWL_POWER_VEC_SIZE; i++) |
| max_sleep[i] = le32_to_cpu(cmd->sleep_interval[i]); |
| max_sleep[IWL_POWER_VEC_SIZE - 1] = skip + 1; |
| } |
| |
| slp_itrvl = le32_to_cpu(cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1]); |
| /* figure out the listen interval based on dtim period and skip */ |
| if (slp_itrvl == 0xFF) |
| cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1] = |
| cpu_to_le32(period * (skip + 1)); |
| |
| slp_itrvl = le32_to_cpu(cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1]); |
| if (slp_itrvl > period) |
| cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1] = |
| cpu_to_le32((slp_itrvl / period) * period); |
| |
| if (skip) |
| cmd->flags |= IWL_POWER_SLEEP_OVER_DTIM_MSK; |
| else |
| cmd->flags &= ~IWL_POWER_SLEEP_OVER_DTIM_MSK; |
| |
| if (priv->cfg->base_params->shadow_reg_enable) |
| cmd->flags |= IWL_POWER_SHADOW_REG_ENA; |
| else |
| cmd->flags &= ~IWL_POWER_SHADOW_REG_ENA; |
| |
| if (iwl_advanced_bt_coexist(priv)) { |
| if (!priv->cfg->bt_params->bt_sco_disable) |
| cmd->flags |= IWL_POWER_BT_SCO_ENA; |
| else |
| cmd->flags &= ~IWL_POWER_BT_SCO_ENA; |
| } |
| |
| |
| slp_itrvl = le32_to_cpu(cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1]); |
| if (slp_itrvl > IWL_CONN_MAX_LISTEN_INTERVAL) |
| cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1] = |
| cpu_to_le32(IWL_CONN_MAX_LISTEN_INTERVAL); |
| |
| /* enforce max sleep interval */ |
| for (i = IWL_POWER_VEC_SIZE - 1; i >= 0 ; i--) { |
| if (le32_to_cpu(cmd->sleep_interval[i]) > |
| (max_sleep[i] * period)) |
| cmd->sleep_interval[i] = |
| cpu_to_le32(max_sleep[i] * period); |
| if (i != (IWL_POWER_VEC_SIZE - 1)) { |
| if (le32_to_cpu(cmd->sleep_interval[i]) > |
| le32_to_cpu(cmd->sleep_interval[i+1])) |
| cmd->sleep_interval[i] = |
| cmd->sleep_interval[i+1]; |
| } |
| } |
| |
| if (priv->power_data.bus_pm) |
| cmd->flags |= IWL_POWER_PCI_PM_MSK; |
| else |
| cmd->flags &= ~IWL_POWER_PCI_PM_MSK; |
| |
| IWL_DEBUG_POWER(priv, "numSkipDtim = %u, dtimPeriod = %d\n", |
| skip, period); |
| /* The power level here is 0-4 (used as array index), but user expects |
| to see 1-5 (according to spec). */ |
| IWL_DEBUG_POWER(priv, "Sleep command for index %d\n", lvl + 1); |
| } |
| |
| static void iwl_power_sleep_cam_cmd(struct iwl_priv *priv, |
| struct iwl_powertable_cmd *cmd) |
| { |
| memset(cmd, 0, sizeof(*cmd)); |
| |
| if (priv->power_data.bus_pm) |
| cmd->flags |= IWL_POWER_PCI_PM_MSK; |
| |
| IWL_DEBUG_POWER(priv, "Sleep command for CAM\n"); |
| } |
| |
| static int iwl_set_power(struct iwl_priv *priv, struct iwl_powertable_cmd *cmd) |
| { |
| IWL_DEBUG_POWER(priv, "Sending power/sleep command\n"); |
| IWL_DEBUG_POWER(priv, "Flags value = 0x%08X\n", cmd->flags); |
| IWL_DEBUG_POWER(priv, "Tx timeout = %u\n", le32_to_cpu(cmd->tx_data_timeout)); |
| IWL_DEBUG_POWER(priv, "Rx timeout = %u\n", le32_to_cpu(cmd->rx_data_timeout)); |
| IWL_DEBUG_POWER(priv, "Sleep interval vector = { %d , %d , %d , %d , %d }\n", |
| le32_to_cpu(cmd->sleep_interval[0]), |
| le32_to_cpu(cmd->sleep_interval[1]), |
| le32_to_cpu(cmd->sleep_interval[2]), |
| le32_to_cpu(cmd->sleep_interval[3]), |
| le32_to_cpu(cmd->sleep_interval[4])); |
| |
| return iwl_dvm_send_cmd_pdu(priv, POWER_TABLE_CMD, CMD_SYNC, |
| sizeof(struct iwl_powertable_cmd), cmd); |
| } |
| |
| static void iwl_power_build_cmd(struct iwl_priv *priv, |
| struct iwl_powertable_cmd *cmd) |
| { |
| bool enabled = priv->hw->conf.flags & IEEE80211_CONF_PS; |
| int dtimper; |
| |
| dtimper = priv->hw->conf.ps_dtim_period ?: 1; |
| |
| if (priv->wowlan) |
| iwl_static_sleep_cmd(priv, cmd, IWL_POWER_INDEX_5, dtimper); |
| else if (!priv->cfg->base_params->no_idle_support && |
| priv->hw->conf.flags & IEEE80211_CONF_IDLE) |
| iwl_static_sleep_cmd(priv, cmd, IWL_POWER_INDEX_5, 20); |
| else if (iwl_tt_is_low_power_state(priv)) { |
| /* in thermal throttling low power state */ |
| iwl_static_sleep_cmd(priv, cmd, |
| iwl_tt_current_power_mode(priv), dtimper); |
| } else if (!enabled) |
| iwl_power_sleep_cam_cmd(priv, cmd); |
| else if (priv->power_data.debug_sleep_level_override >= 0) |
| iwl_static_sleep_cmd(priv, cmd, |
| priv->power_data.debug_sleep_level_override, |
| dtimper); |
| else { |
| /* Note that the user parameter is 1-5 (according to spec), |
| but we pass 0-4 because it acts as an array index. */ |
| if (iwlwifi_mod_params.power_level > IWL_POWER_INDEX_1 && |
| iwlwifi_mod_params.power_level <= IWL_POWER_NUM) |
| iwl_static_sleep_cmd(priv, cmd, |
| iwlwifi_mod_params.power_level - 1, dtimper); |
| else |
| iwl_static_sleep_cmd(priv, cmd, |
| IWL_POWER_INDEX_1, dtimper); |
| } |
| } |
| |
| int iwl_power_set_mode(struct iwl_priv *priv, struct iwl_powertable_cmd *cmd, |
| bool force) |
| { |
| int ret; |
| bool update_chains; |
| |
| lockdep_assert_held(&priv->mutex); |
| |
| /* Don't update the RX chain when chain noise calibration is running */ |
| update_chains = priv->chain_noise_data.state == IWL_CHAIN_NOISE_DONE || |
| priv->chain_noise_data.state == IWL_CHAIN_NOISE_ALIVE; |
| |
| if (!memcmp(&priv->power_data.sleep_cmd, cmd, sizeof(*cmd)) && !force) |
| return 0; |
| |
| if (!iwl_is_ready_rf(priv)) |
| return -EIO; |
| |
| /* scan complete use sleep_power_next, need to be updated */ |
| memcpy(&priv->power_data.sleep_cmd_next, cmd, sizeof(*cmd)); |
| if (test_bit(STATUS_SCANNING, &priv->status) && !force) { |
| IWL_DEBUG_INFO(priv, "Defer power set mode while scanning\n"); |
| return 0; |
| } |
| |
| if (cmd->flags & IWL_POWER_DRIVER_ALLOW_SLEEP_MSK) |
| iwl_dvm_set_pmi(priv, true); |
| |
| ret = iwl_set_power(priv, cmd); |
| if (!ret) { |
| if (!(cmd->flags & IWL_POWER_DRIVER_ALLOW_SLEEP_MSK)) |
| iwl_dvm_set_pmi(priv, false); |
| |
| if (update_chains) |
| iwl_update_chain_flags(priv); |
| else |
| IWL_DEBUG_POWER(priv, |
| "Cannot update the power, chain noise " |
| "calibration running: %d\n", |
| priv->chain_noise_data.state); |
| |
| memcpy(&priv->power_data.sleep_cmd, cmd, sizeof(*cmd)); |
| } else |
| IWL_ERR(priv, "set power fail, ret = %d", ret); |
| |
| return ret; |
| } |
| |
| int iwl_power_update_mode(struct iwl_priv *priv, bool force) |
| { |
| struct iwl_powertable_cmd cmd; |
| |
| iwl_power_build_cmd(priv, &cmd); |
| return iwl_power_set_mode(priv, &cmd, force); |
| } |
| |
| /* initialize to default */ |
| void iwl_power_initialize(struct iwl_priv *priv) |
| { |
| priv->power_data.bus_pm = priv->trans->pm_support; |
| |
| priv->power_data.debug_sleep_level_override = -1; |
| |
| memset(&priv->power_data.sleep_cmd, 0, |
| sizeof(priv->power_data.sleep_cmd)); |
| } |