| /* |
| * June 2006 steve.glendinning@smsc.com |
| * |
| * Polaris-specific resource declaration |
| * |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/interrupt.h> |
| #include <linux/irq.h> |
| #include <linux/platform_device.h> |
| #include <linux/smsc911x.h> |
| #include <linux/io.h> |
| #include <asm/irq.h> |
| #include <asm/machvec.h> |
| #include <asm/heartbeat.h> |
| #include <cpu/gpio.h> |
| #include <mach-se/mach/se.h> |
| |
| #define BCR2 (0xFFFFFF62) |
| #define WCR2 (0xFFFFFF66) |
| #define AREA5_WAIT_CTRL (0x1C00) |
| #define WAIT_STATES_10 (0x7) |
| |
| static struct resource smsc911x_resources[] = { |
| [0] = { |
| .name = "smsc911x-memory", |
| .start = PA_EXT5, |
| .end = PA_EXT5 + 0x1fff, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .name = "smsc911x-irq", |
| .start = IRQ0_IRQ, |
| .end = IRQ0_IRQ, |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct smsc911x_platform_config smsc911x_config = { |
| .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, |
| .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, |
| .flags = SMSC911X_USE_32BIT, |
| .phy_interface = PHY_INTERFACE_MODE_MII, |
| }; |
| |
| static struct platform_device smsc911x_device = { |
| .name = "smsc911x", |
| .id = 0, |
| .num_resources = ARRAY_SIZE(smsc911x_resources), |
| .resource = smsc911x_resources, |
| .dev = { |
| .platform_data = &smsc911x_config, |
| }, |
| }; |
| |
| static unsigned char heartbeat_bit_pos[] = { 0, 1, 2, 3 }; |
| |
| static struct heartbeat_data heartbeat_data = { |
| .bit_pos = heartbeat_bit_pos, |
| .nr_bits = ARRAY_SIZE(heartbeat_bit_pos), |
| }; |
| |
| static struct resource heartbeat_resource = { |
| .start = PORT_PCDR, |
| .end = PORT_PCDR, |
| .flags = IORESOURCE_MEM | IORESOURCE_MEM_8BIT, |
| }; |
| |
| static struct platform_device heartbeat_device = { |
| .name = "heartbeat", |
| .id = -1, |
| .dev = { |
| .platform_data = &heartbeat_data, |
| }, |
| .num_resources = 1, |
| .resource = &heartbeat_resource, |
| }; |
| |
| static struct platform_device *polaris_devices[] __initdata = { |
| &smsc911x_device, |
| &heartbeat_device, |
| }; |
| |
| static int __init polaris_initialise(void) |
| { |
| u16 wcr, bcr_mask; |
| |
| printk(KERN_INFO "Configuring Polaris external bus\n"); |
| |
| /* Configure area 5 with 2 wait states */ |
| wcr = __raw_readw(WCR2); |
| wcr &= (~AREA5_WAIT_CTRL); |
| wcr |= (WAIT_STATES_10 << 10); |
| __raw_writew(wcr, WCR2); |
| |
| /* Configure area 5 for 32-bit access */ |
| bcr_mask = __raw_readw(BCR2); |
| bcr_mask |= 1 << 10; |
| __raw_writew(bcr_mask, BCR2); |
| |
| return platform_add_devices(polaris_devices, |
| ARRAY_SIZE(polaris_devices)); |
| } |
| arch_initcall(polaris_initialise); |
| |
| static struct ipr_data ipr_irq_table[] = { |
| /* External IRQs */ |
| { IRQ0_IRQ, 0, 0, 1, }, /* IRQ0 */ |
| { IRQ1_IRQ, 0, 4, 1, }, /* IRQ1 */ |
| }; |
| |
| static unsigned long ipr_offsets[] = { |
| INTC_IPRC |
| }; |
| |
| static struct ipr_desc ipr_irq_desc = { |
| .ipr_offsets = ipr_offsets, |
| .nr_offsets = ARRAY_SIZE(ipr_offsets), |
| |
| .ipr_data = ipr_irq_table, |
| .nr_irqs = ARRAY_SIZE(ipr_irq_table), |
| .chip = { |
| .name = "sh7709-ext", |
| }, |
| }; |
| |
| static void __init init_polaris_irq(void) |
| { |
| /* Disable all interrupts */ |
| __raw_writew(0, BCR_ILCRA); |
| __raw_writew(0, BCR_ILCRB); |
| __raw_writew(0, BCR_ILCRC); |
| __raw_writew(0, BCR_ILCRD); |
| __raw_writew(0, BCR_ILCRE); |
| __raw_writew(0, BCR_ILCRF); |
| __raw_writew(0, BCR_ILCRG); |
| |
| register_ipr_controller(&ipr_irq_desc); |
| } |
| |
| static struct sh_machine_vector mv_polaris __initmv = { |
| .mv_name = "Polaris", |
| .mv_init_irq = init_polaris_irq, |
| }; |