| /* |
| * zfcp device driver |
| * |
| * Registration and callback for the s390 common I/O layer. |
| * |
| * Copyright IBM Corporation 2002, 2008 |
| */ |
| |
| #include "zfcp_ext.h" |
| |
| /** |
| * zfcp_ccw_probe - probe function of zfcp driver |
| * @ccw_device: pointer to belonging ccw device |
| * |
| * This function gets called by the common i/o layer and sets up the initial |
| * data structures for each fcp adapter, which was detected by the system. |
| * Also the sysfs files for this adapter will be created by this function. |
| * In addition the nameserver port will be added to the ports of the adapter |
| * and its sysfs representation will be created too. |
| */ |
| static int zfcp_ccw_probe(struct ccw_device *ccw_device) |
| { |
| int retval = 0; |
| |
| down(&zfcp_data.config_sema); |
| if (zfcp_adapter_enqueue(ccw_device)) { |
| dev_err(&ccw_device->dev, |
| "Setting up data structures for the " |
| "FCP adapter failed\n"); |
| retval = -EINVAL; |
| } |
| up(&zfcp_data.config_sema); |
| return retval; |
| } |
| |
| /** |
| * zfcp_ccw_remove - remove function of zfcp driver |
| * @ccw_device: pointer to belonging ccw device |
| * |
| * This function gets called by the common i/o layer and removes an adapter |
| * from the system. Task of this function is to get rid of all units and |
| * ports that belong to this adapter. And in addition all resources of this |
| * adapter will be freed too. |
| */ |
| static void zfcp_ccw_remove(struct ccw_device *ccw_device) |
| { |
| struct zfcp_adapter *adapter; |
| struct zfcp_port *port, *p; |
| struct zfcp_unit *unit, *u; |
| LIST_HEAD(unit_remove_lh); |
| LIST_HEAD(port_remove_lh); |
| |
| ccw_device_set_offline(ccw_device); |
| down(&zfcp_data.config_sema); |
| adapter = dev_get_drvdata(&ccw_device->dev); |
| |
| write_lock_irq(&zfcp_data.config_lock); |
| list_for_each_entry_safe(port, p, &adapter->port_list_head, list) { |
| list_for_each_entry_safe(unit, u, &port->unit_list_head, list) { |
| list_move(&unit->list, &unit_remove_lh); |
| atomic_set_mask(ZFCP_STATUS_COMMON_REMOVE, |
| &unit->status); |
| } |
| list_move(&port->list, &port_remove_lh); |
| atomic_set_mask(ZFCP_STATUS_COMMON_REMOVE, &port->status); |
| } |
| atomic_set_mask(ZFCP_STATUS_COMMON_REMOVE, &adapter->status); |
| write_unlock_irq(&zfcp_data.config_lock); |
| |
| list_for_each_entry_safe(port, p, &port_remove_lh, list) { |
| list_for_each_entry_safe(unit, u, &unit_remove_lh, list) { |
| if (atomic_read(&unit->status) & |
| ZFCP_STATUS_UNIT_REGISTERED) |
| scsi_remove_device(unit->device); |
| zfcp_unit_dequeue(unit); |
| } |
| zfcp_port_dequeue(port); |
| } |
| wait_event(adapter->remove_wq, atomic_read(&adapter->refcount) == 0); |
| zfcp_adapter_dequeue(adapter); |
| |
| up(&zfcp_data.config_sema); |
| } |
| |
| /** |
| * zfcp_ccw_set_online - set_online function of zfcp driver |
| * @ccw_device: pointer to belonging ccw device |
| * |
| * This function gets called by the common i/o layer and sets an adapter |
| * into state online. Setting an fcp device online means that it will be |
| * registered with the SCSI stack, that the QDIO queues will be set up |
| * and that the adapter will be opened (asynchronously). |
| */ |
| static int zfcp_ccw_set_online(struct ccw_device *ccw_device) |
| { |
| struct zfcp_adapter *adapter; |
| int retval; |
| |
| down(&zfcp_data.config_sema); |
| adapter = dev_get_drvdata(&ccw_device->dev); |
| |
| retval = zfcp_erp_thread_setup(adapter); |
| if (retval) |
| goto out; |
| |
| retval = zfcp_adapter_scsi_register(adapter); |
| if (retval) |
| goto out_scsi_register; |
| |
| /* initialize request counter */ |
| BUG_ON(!zfcp_reqlist_isempty(adapter)); |
| adapter->req_no = 0; |
| |
| zfcp_erp_modify_adapter_status(adapter, 10, NULL, |
| ZFCP_STATUS_COMMON_RUNNING, ZFCP_SET); |
| zfcp_erp_adapter_reopen(adapter, ZFCP_STATUS_COMMON_ERP_FAILED, 85, |
| NULL); |
| zfcp_erp_wait(adapter); |
| goto out; |
| |
| out_scsi_register: |
| zfcp_erp_thread_kill(adapter); |
| out: |
| up(&zfcp_data.config_sema); |
| return retval; |
| } |
| |
| /** |
| * zfcp_ccw_set_offline - set_offline function of zfcp driver |
| * @ccw_device: pointer to belonging ccw device |
| * |
| * This function gets called by the common i/o layer and sets an adapter |
| * into state offline. |
| */ |
| static int zfcp_ccw_set_offline(struct ccw_device *ccw_device) |
| { |
| struct zfcp_adapter *adapter; |
| |
| down(&zfcp_data.config_sema); |
| adapter = dev_get_drvdata(&ccw_device->dev); |
| zfcp_erp_adapter_shutdown(adapter, 0, 86, NULL); |
| zfcp_erp_wait(adapter); |
| zfcp_erp_thread_kill(adapter); |
| up(&zfcp_data.config_sema); |
| return 0; |
| } |
| |
| /** |
| * zfcp_ccw_notify - ccw notify function |
| * @ccw_device: pointer to belonging ccw device |
| * @event: indicates if adapter was detached or attached |
| * |
| * This function gets called by the common i/o layer if an adapter has gone |
| * or reappeared. |
| */ |
| static int zfcp_ccw_notify(struct ccw_device *ccw_device, int event) |
| { |
| struct zfcp_adapter *adapter = dev_get_drvdata(&ccw_device->dev); |
| |
| switch (event) { |
| case CIO_GONE: |
| dev_warn(&adapter->ccw_device->dev, |
| "The FCP device has been detached\n"); |
| zfcp_erp_adapter_shutdown(adapter, 0, 87, NULL); |
| break; |
| case CIO_NO_PATH: |
| dev_warn(&adapter->ccw_device->dev, |
| "The CHPID for the FCP device is offline\n"); |
| zfcp_erp_adapter_shutdown(adapter, 0, 88, NULL); |
| break; |
| case CIO_OPER: |
| dev_info(&adapter->ccw_device->dev, |
| "The FCP device is operational again\n"); |
| zfcp_erp_modify_adapter_status(adapter, 11, NULL, |
| ZFCP_STATUS_COMMON_RUNNING, |
| ZFCP_SET); |
| zfcp_erp_adapter_reopen(adapter, ZFCP_STATUS_COMMON_ERP_FAILED, |
| 89, NULL); |
| break; |
| } |
| return 1; |
| } |
| |
| /** |
| * zfcp_ccw_shutdown - handle shutdown from cio |
| * @cdev: device for adapter to shutdown. |
| */ |
| static void zfcp_ccw_shutdown(struct ccw_device *cdev) |
| { |
| struct zfcp_adapter *adapter; |
| |
| down(&zfcp_data.config_sema); |
| adapter = dev_get_drvdata(&cdev->dev); |
| zfcp_erp_adapter_shutdown(adapter, 0, 90, NULL); |
| zfcp_erp_wait(adapter); |
| up(&zfcp_data.config_sema); |
| } |
| |
| static struct ccw_device_id zfcp_ccw_device_id[] = { |
| { CCW_DEVICE_DEVTYPE(0x1731, 0x3, 0x1732, 0x3) }, |
| { CCW_DEVICE_DEVTYPE(0x1731, 0x3, 0x1732, 0x4) }, /* priv. */ |
| {}, |
| }; |
| |
| MODULE_DEVICE_TABLE(ccw, zfcp_ccw_device_id); |
| |
| static struct ccw_driver zfcp_ccw_driver = { |
| .owner = THIS_MODULE, |
| .name = "zfcp", |
| .ids = zfcp_ccw_device_id, |
| .probe = zfcp_ccw_probe, |
| .remove = zfcp_ccw_remove, |
| .set_online = zfcp_ccw_set_online, |
| .set_offline = zfcp_ccw_set_offline, |
| .notify = zfcp_ccw_notify, |
| .shutdown = zfcp_ccw_shutdown, |
| }; |
| |
| /** |
| * zfcp_ccw_register - ccw register function |
| * |
| * Registers the driver at the common i/o layer. This function will be called |
| * at module load time/system start. |
| */ |
| int __init zfcp_ccw_register(void) |
| { |
| return ccw_driver_register(&zfcp_ccw_driver); |
| } |
| |
| /** |
| * zfcp_get_adapter_by_busid - find zfcp_adapter struct |
| * @busid: bus id string of zfcp adapter to find |
| */ |
| struct zfcp_adapter *zfcp_get_adapter_by_busid(char *busid) |
| { |
| struct ccw_device *ccw_device; |
| struct zfcp_adapter *adapter = NULL; |
| |
| ccw_device = get_ccwdev_by_busid(&zfcp_ccw_driver, busid); |
| if (ccw_device) { |
| adapter = dev_get_drvdata(&ccw_device->dev); |
| put_device(&ccw_device->dev); |
| } |
| return adapter; |
| } |