| config PARISC |
| def_bool y |
| select HAVE_IDE |
| select HAVE_OPROFILE |
| select HAVE_FUNCTION_TRACER if 64BIT |
| select HAVE_FUNCTION_GRAPH_TRACER if 64BIT |
| select HAVE_FUNCTION_TRACE_MCOUNT_TEST if 64BIT |
| select RTC_CLASS |
| select RTC_DRV_GENERIC |
| select INIT_ALL_POSSIBLE |
| select BUG |
| select HAVE_PERF_EVENTS |
| select GENERIC_ATOMIC64 if !64BIT |
| select HAVE_GENERIC_HARDIRQS |
| select BROKEN_RODATA |
| select GENERIC_IRQ_PROBE |
| select GENERIC_PCI_IOMAP |
| select IRQ_PER_CPU |
| select ARCH_HAVE_NMI_SAFE_CMPXCHG |
| select GENERIC_SMP_IDLE_THREAD |
| select GENERIC_STRNCPY_FROM_USER |
| select HAVE_MOD_ARCH_SPECIFIC |
| select MODULES_USE_ELF_RELA |
| |
| help |
| The PA-RISC microprocessor is designed by Hewlett-Packard and used |
| in many of their workstations & servers (HP9000 700 and 800 series, |
| and later HP3000 series). The PA-RISC Linux project home page is |
| at <http://www.parisc-linux.org/>. |
| |
| config MMU |
| def_bool y |
| |
| config STACK_GROWSUP |
| def_bool y |
| |
| config GENERIC_LOCKBREAK |
| bool |
| default y |
| depends on SMP && PREEMPT |
| |
| config RWSEM_GENERIC_SPINLOCK |
| def_bool y |
| |
| config RWSEM_XCHGADD_ALGORITHM |
| bool |
| |
| config ARCH_HAS_ILOG2_U32 |
| bool |
| default n |
| |
| config ARCH_HAS_ILOG2_U64 |
| bool |
| default n |
| |
| config GENERIC_BUG |
| bool |
| default y |
| depends on BUG |
| |
| config GENERIC_HWEIGHT |
| bool |
| default y |
| |
| config GENERIC_CALIBRATE_DELAY |
| bool |
| default y |
| |
| config TIME_LOW_RES |
| bool |
| depends on SMP |
| default y |
| |
| config HAVE_LATENCYTOP_SUPPORT |
| def_bool y |
| |
| # unless you want to implement ACPI on PA-RISC ... ;-) |
| config PM |
| bool |
| |
| config STACKTRACE_SUPPORT |
| def_bool y |
| |
| config NEED_DMA_MAP_STATE |
| def_bool y |
| |
| config NEED_SG_DMA_LENGTH |
| def_bool y |
| |
| config ISA_DMA_API |
| bool |
| |
| config ARCH_MAY_HAVE_PC_FDC |
| bool |
| depends on BROKEN |
| default y |
| |
| source "init/Kconfig" |
| |
| source "kernel/Kconfig.freezer" |
| |
| |
| menu "Processor type and features" |
| |
| choice |
| prompt "Processor type" |
| default PA7000 |
| |
| config PA7000 |
| bool "PA7000/PA7100" |
| ---help--- |
| This is the processor type of your CPU. This information is |
| used for optimizing purposes. In order to compile a kernel |
| that can run on all 32-bit PA CPUs (albeit not optimally fast), |
| you can specify "PA7000" here. |
| |
| Specifying "PA8000" here will allow you to select a 64-bit kernel |
| which is required on some machines. |
| |
| config PA7100LC |
| bool "PA7100LC" |
| help |
| Select this option for the PCX-L processor, as used in the |
| 712, 715/64, 715/80, 715/100, 715/100XC, 725/100, 743, 748, |
| D200, D210, D300, D310 and E-class |
| |
| config PA7200 |
| bool "PA7200" |
| help |
| Select this option for the PCX-T' processor, as used in the |
| C100, C110, J100, J110, J210XC, D250, D260, D350, D360, |
| K100, K200, K210, K220, K400, K410 and K420 |
| |
| config PA7300LC |
| bool "PA7300LC" |
| help |
| Select this option for the PCX-L2 processor, as used in the |
| 744, A180, B132L, B160L, B180L, C132L, C160L, C180L, |
| D220, D230, D320 and D330. |
| |
| config PA8X00 |
| bool "PA8000 and up" |
| help |
| Select this option for PCX-U to PCX-W2 processors. |
| |
| endchoice |
| |
| # Define implied options from the CPU selection here |
| |
| config PA20 |
| def_bool y |
| depends on PA8X00 |
| |
| config PA11 |
| def_bool y |
| depends on PA7000 || PA7100LC || PA7200 || PA7300LC |
| |
| config PREFETCH |
| def_bool y |
| depends on PA8X00 || PA7200 |
| |
| config 64BIT |
| bool "64-bit kernel" |
| depends on PA8X00 |
| help |
| Enable this if you want to support 64bit kernel on PA-RISC platform. |
| |
| At the moment, only people willing to use more than 2GB of RAM, |
| or having a 64bit-only capable PA-RISC machine should say Y here. |
| |
| Since there is no 64bit userland on PA-RISC, there is no point to |
| enable this option otherwise. The 64bit kernel is significantly bigger |
| and slower than the 32bit one. |
| |
| choice |
| prompt "Kernel page size" |
| default PARISC_PAGE_SIZE_4KB |
| |
| config PARISC_PAGE_SIZE_4KB |
| bool "4KB" |
| help |
| This lets you select the page size of the kernel. For best |
| performance, a page size of 16KB is recommended. For best |
| compatibility with 32bit applications, a page size of 4KB should be |
| selected (the vast majority of 32bit binaries work perfectly fine |
| with a larger page size). |
| |
| 4KB For best 32bit compatibility |
| 16KB For best performance |
| 64KB For best performance, might give more overhead. |
| |
| If you don't know what to do, choose 4KB. |
| |
| config PARISC_PAGE_SIZE_16KB |
| bool "16KB (EXPERIMENTAL)" |
| depends on PA8X00 && EXPERIMENTAL |
| |
| config PARISC_PAGE_SIZE_64KB |
| bool "64KB (EXPERIMENTAL)" |
| depends on PA8X00 && EXPERIMENTAL |
| |
| endchoice |
| |
| config SMP |
| bool "Symmetric multi-processing support" |
| select USE_GENERIC_SMP_HELPERS |
| ---help--- |
| This enables support for systems with more than one CPU. If you have |
| a system with only one CPU, like most personal computers, say N. If |
| you have a system with more than one CPU, say Y. |
| |
| If you say N here, the kernel will run on single and multiprocessor |
| machines, but will use only one CPU of a multiprocessor machine. If |
| you say Y here, the kernel will run on many, but not all, |
| singleprocessor machines. On a singleprocessor machine, the kernel |
| will run faster if you say N here. |
| |
| See also <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO |
| available at <http://www.tldp.org/docs.html#howto>. |
| |
| If you don't know what to do here, say N. |
| |
| config HOTPLUG_CPU |
| bool |
| default y if SMP |
| select HOTPLUG |
| |
| config ARCH_SELECT_MEMORY_MODEL |
| def_bool y |
| depends on 64BIT |
| |
| config ARCH_DISCONTIGMEM_ENABLE |
| def_bool y |
| depends on 64BIT |
| |
| config ARCH_FLATMEM_ENABLE |
| def_bool y |
| |
| config ARCH_DISCONTIGMEM_DEFAULT |
| def_bool y |
| depends on ARCH_DISCONTIGMEM_ENABLE |
| |
| config NODES_SHIFT |
| int |
| default "3" |
| depends on NEED_MULTIPLE_NODES |
| |
| source "kernel/Kconfig.preempt" |
| source "kernel/Kconfig.hz" |
| source "mm/Kconfig" |
| |
| config COMPAT |
| def_bool y |
| depends on 64BIT |
| |
| config HPUX |
| bool "Support for HP-UX binaries" |
| depends on !64BIT |
| |
| config NR_CPUS |
| int "Maximum number of CPUs (2-32)" |
| range 2 32 |
| depends on SMP |
| default "32" |
| |
| endmenu |
| |
| |
| source "drivers/parisc/Kconfig" |
| |
| |
| menu "Executable file formats" |
| |
| source "fs/Kconfig.binfmt" |
| |
| endmenu |
| |
| source "net/Kconfig" |
| |
| source "drivers/Kconfig" |
| |
| source "fs/Kconfig" |
| |
| source "arch/parisc/Kconfig.debug" |
| |
| source "security/Kconfig" |
| |
| source "crypto/Kconfig" |
| |
| source "lib/Kconfig" |