| config MIPS |
| bool |
| default y |
| select HAVE_GENERIC_DMA_COHERENT |
| select HAVE_IDE |
| select HAVE_OPROFILE |
| select HAVE_PERF_EVENTS |
| select PERF_USE_VMALLOC |
| select HAVE_ARCH_KGDB |
| select ARCH_HAVE_CUSTOM_GPIO_H |
| select HAVE_FUNCTION_TRACER |
| select HAVE_FUNCTION_TRACE_MCOUNT_TEST |
| select HAVE_DYNAMIC_FTRACE |
| select HAVE_FTRACE_MCOUNT_RECORD |
| select HAVE_C_RECORDMCOUNT |
| select HAVE_FUNCTION_GRAPH_TRACER |
| select HAVE_KPROBES |
| select HAVE_KRETPROBES |
| select HAVE_DEBUG_KMEMLEAK |
| select ARCH_BINFMT_ELF_RANDOMIZE_PIE |
| select RTC_LIB if !MACH_LOONGSON |
| select GENERIC_ATOMIC64 if !64BIT |
| select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE |
| select HAVE_DMA_ATTRS |
| select HAVE_DMA_API_DEBUG |
| select HAVE_GENERIC_HARDIRQS |
| select GENERIC_IRQ_PROBE |
| select GENERIC_IRQ_SHOW |
| select HAVE_ARCH_JUMP_LABEL |
| select ARCH_WANT_IPC_PARSE_VERSION |
| select IRQ_FORCED_THREADING |
| select HAVE_MEMBLOCK |
| select HAVE_MEMBLOCK_NODE_MAP |
| select ARCH_DISCARD_MEMBLOCK |
| select GENERIC_SMP_IDLE_THREAD |
| select BUILDTIME_EXTABLE_SORT |
| select GENERIC_CLOCKEVENTS |
| select GENERIC_CMOS_UPDATE |
| select HAVE_MOD_ARCH_SPECIFIC |
| select MODULES_USE_ELF_REL |
| select MODULES_USE_ELF_RELA if 64BIT |
| |
| menu "Machine selection" |
| |
| config ZONE_DMA |
| bool |
| |
| choice |
| prompt "System type" |
| default SGI_IP22 |
| |
| config MIPS_ALCHEMY |
| bool "Alchemy processor based machines" |
| select 64BIT_PHYS_ADDR |
| select CEVT_R4K_LIB |
| select CSRC_R4K_LIB |
| select IRQ_CPU |
| select SYS_HAS_CPU_MIPS32_R1 |
| select SYS_SUPPORTS_32BIT_KERNEL |
| select SYS_SUPPORTS_APM_EMULATION |
| select GENERIC_GPIO |
| select ARCH_WANT_OPTIONAL_GPIOLIB |
| select SYS_SUPPORTS_ZBOOT |
| select USB_ARCH_HAS_OHCI |
| select USB_ARCH_HAS_EHCI |
| |
| config AR7 |
| bool "Texas Instruments AR7" |
| select BOOT_ELF32 |
| select DMA_NONCOHERENT |
| select CEVT_R4K |
| select CSRC_R4K |
| select IRQ_CPU |
| select NO_EXCEPT_FILL |
| select SWAP_IO_SPACE |
| select SYS_HAS_CPU_MIPS32_R1 |
| select SYS_HAS_EARLY_PRINTK |
| select SYS_SUPPORTS_32BIT_KERNEL |
| select SYS_SUPPORTS_LITTLE_ENDIAN |
| select SYS_SUPPORTS_ZBOOT_UART16550 |
| select ARCH_REQUIRE_GPIOLIB |
| select VLYNQ |
| select HAVE_CLK |
| help |
| Support for the Texas Instruments AR7 System-on-a-Chip |
| family: TNETD7100, 7200 and 7300. |
| |
| config ATH79 |
| bool "Atheros AR71XX/AR724X/AR913X based boards" |
| select ARCH_REQUIRE_GPIOLIB |
| select BOOT_RAW |
| select CEVT_R4K |
| select CSRC_R4K |
| select DMA_NONCOHERENT |
| select HAVE_CLK |
| select IRQ_CPU |
| select MIPS_MACHINE |
| select SYS_HAS_CPU_MIPS32_R2 |
| select SYS_HAS_EARLY_PRINTK |
| select SYS_SUPPORTS_32BIT_KERNEL |
| select SYS_SUPPORTS_BIG_ENDIAN |
| help |
| Support for the Atheros AR71XX/AR724X/AR913X SoCs. |
| |
| config BCM47XX |
| bool "Broadcom BCM47XX based boards" |
| select CEVT_R4K |
| select CSRC_R4K |
| select DMA_NONCOHERENT |
| select HW_HAS_PCI |
| select IRQ_CPU |
| select SYS_SUPPORTS_32BIT_KERNEL |
| select SYS_SUPPORTS_LITTLE_ENDIAN |
| select GENERIC_GPIO |
| select SYS_HAS_EARLY_PRINTK |
| select CFE |
| help |
| Support for BCM47XX based boards |
| |
| config BCM63XX |
| bool "Broadcom BCM63XX based boards" |
| select CEVT_R4K |
| select CSRC_R4K |
| select DMA_NONCOHERENT |
| select IRQ_CPU |
| select SYS_HAS_CPU_MIPS32_R1 |
| select SYS_SUPPORTS_32BIT_KERNEL |
| select SYS_SUPPORTS_BIG_ENDIAN |
| select SYS_HAS_EARLY_PRINTK |
| select SWAP_IO_SPACE |
| select ARCH_REQUIRE_GPIOLIB |
| select HAVE_CLK |
| help |
| Support for BCM63XX based boards |
| |
| config MIPS_COBALT |
| bool "Cobalt Server" |
| select CEVT_R4K |
| select CSRC_R4K |
| select CEVT_GT641XX |
| select DMA_NONCOHERENT |
| select HW_HAS_PCI |
| select I8253 |
| select I8259 |
| select IRQ_CPU |
| select IRQ_GT641XX |
| select PCI_GT64XXX_PCI0 |
| select PCI |
| select SYS_HAS_CPU_NEVADA |
| select SYS_HAS_EARLY_PRINTK |
| select SYS_SUPPORTS_32BIT_KERNEL |
| select SYS_SUPPORTS_64BIT_KERNEL |
| select SYS_SUPPORTS_LITTLE_ENDIAN |
| |
| config MACH_DECSTATION |
| bool "DECstations" |
| select BOOT_ELF32 |
| select CEVT_DS1287 |
| select CEVT_R4K |
| select CSRC_IOASIC |
| select CSRC_R4K |
| select CPU_DADDI_WORKAROUNDS if 64BIT |
| select CPU_R4000_WORKAROUNDS if 64BIT |
| select CPU_R4400_WORKAROUNDS if 64BIT |
| select DMA_NONCOHERENT |
| select NO_IOPORT |
| select IRQ_CPU |
| select SYS_HAS_CPU_R3000 |
| select SYS_HAS_CPU_R4X00 |
| select SYS_SUPPORTS_32BIT_KERNEL |
| select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL |
| select SYS_SUPPORTS_LITTLE_ENDIAN |
| select SYS_SUPPORTS_128HZ |
| select SYS_SUPPORTS_256HZ |
| select SYS_SUPPORTS_1024HZ |
| help |
| This enables support for DEC's MIPS based workstations. For details |
| see the Linux/MIPS FAQ on <http://www.linux-mips.org/> and the |
| DECstation porting pages on <http://decstation.unix-ag.org/>. |
| |
| If you have one of the following DECstation Models you definitely |
| want to choose R4xx0 for the CPU Type: |
| |
| DECstation 5000/50 |
| DECstation 5000/150 |
| DECstation 5000/260 |
| DECsystem 5900/260 |
| |
| otherwise choose R3000. |
| |
| config MACH_JAZZ |
| bool "Jazz family of machines" |
| select ARC |
| select ARC32 |
| select ARCH_MAY_HAVE_PC_FDC |
| select CEVT_R4K |
| select CSRC_R4K |
| select DEFAULT_SGI_PARTITION if CPU_BIG_ENDIAN |
| select GENERIC_ISA_DMA |
| select HAVE_PCSPKR_PLATFORM |
| select IRQ_CPU |
| select I8253 |
| select I8259 |
| select ISA |
| select SYS_HAS_CPU_R4X00 |
| select SYS_SUPPORTS_32BIT_KERNEL |
| select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL |
| select SYS_SUPPORTS_100HZ |
| help |
| This a family of machines based on the MIPS R4030 chipset which was |
| used by several vendors to build RISC/os and Windows NT workstations. |
| Members include the Acer PICA, MIPS Magnum 4000, MIPS Millennium and |
| Olivetti M700-10 workstations. |
| |
| config MACH_JZ4740 |
| bool "Ingenic JZ4740 based machines" |
| select SYS_HAS_CPU_MIPS32_R1 |
| select SYS_SUPPORTS_32BIT_KERNEL |
| select SYS_SUPPORTS_LITTLE_ENDIAN |
| select SYS_SUPPORTS_ZBOOT_UART16550 |
| select DMA_NONCOHERENT |
| select IRQ_CPU |
| select GENERIC_GPIO |
| select ARCH_REQUIRE_GPIOLIB |
| select SYS_HAS_EARLY_PRINTK |
| select HAVE_PWM |
| select HAVE_CLK |
| select GENERIC_IRQ_CHIP |
| |
| config LANTIQ |
| bool "Lantiq based platforms" |
| select DMA_NONCOHERENT |
| select IRQ_CPU |
| select CEVT_R4K |
| select CSRC_R4K |
| select SYS_HAS_CPU_MIPS32_R1 |
| select SYS_HAS_CPU_MIPS32_R2 |
| select SYS_SUPPORTS_BIG_ENDIAN |
| select SYS_SUPPORTS_32BIT_KERNEL |
| select SYS_SUPPORTS_MULTITHREADING |
| select SYS_HAS_EARLY_PRINTK |
| select ARCH_REQUIRE_GPIOLIB |
| select SWAP_IO_SPACE |
| select BOOT_RAW |
| select HAVE_MACH_CLKDEV |
| select CLKDEV_LOOKUP |
| select USE_OF |
| select PINCTRL |
| select PINCTRL_LANTIQ |
| |
| config LASAT |
| bool "LASAT Networks platforms" |
| select CEVT_R4K |
| select CSRC_R4K |
| select DMA_NONCOHERENT |
| select SYS_HAS_EARLY_PRINTK |
| select HW_HAS_PCI |
| select IRQ_CPU |
| select PCI_GT64XXX_PCI0 |
| select MIPS_NILE4 |
| select R5000_CPU_SCACHE |
| select SYS_HAS_CPU_R5000 |
| select SYS_SUPPORTS_32BIT_KERNEL |
| select SYS_SUPPORTS_64BIT_KERNEL if BROKEN |
| select SYS_SUPPORTS_LITTLE_ENDIAN |
| |
| config MACH_LOONGSON |
| bool "Loongson family of machines" |
| select SYS_SUPPORTS_ZBOOT |
| help |
| This enables the support of Loongson family of machines. |
| |
| Loongson is a family of general-purpose MIPS-compatible CPUs. |
| developed at Institute of Computing Technology (ICT), |
| Chinese Academy of Sciences (CAS) in the People's Republic |
| of China. The chief architect is Professor Weiwu Hu. |
| |
| config MACH_LOONGSON1 |
| bool "Loongson 1 family of machines" |
| select SYS_SUPPORTS_ZBOOT |
| help |
| This enables support for the Loongson 1 based machines. |
| |
| Loongson 1 is a family of 32-bit MIPS-compatible SoCs developed by |
| the ICT (Institute of Computing Technology) and the Chinese Academy |
| of Sciences. |
| |
| config MIPS_MALTA |
| bool "MIPS Malta board" |
| select ARCH_MAY_HAVE_PC_FDC |
| select BOOT_ELF32 |
| select BOOT_RAW |
| select CEVT_R4K |
| select CSRC_R4K |
| select DMA_NONCOHERENT |
| select GENERIC_ISA_DMA |
| select HAVE_PCSPKR_PLATFORM |
| select IRQ_CPU |
| select IRQ_GIC |
| select HW_HAS_PCI |
| select I8253 |
| select I8259 |
| select MIPS_BOARDS_GEN |
| select MIPS_BONITO64 |
| select MIPS_CPU_SCACHE |
| select PCI_GT64XXX_PCI0 |
| select MIPS_MSC |
| select SWAP_IO_SPACE |
| select SYS_HAS_CPU_MIPS32_R1 |
| select SYS_HAS_CPU_MIPS32_R2 |
| select SYS_HAS_CPU_MIPS64_R1 |
| select SYS_HAS_CPU_MIPS64_R2 |
| select SYS_HAS_CPU_NEVADA |
| select SYS_HAS_CPU_RM7000 |
| select SYS_HAS_EARLY_PRINTK |
| select SYS_SUPPORTS_32BIT_KERNEL |
| select SYS_SUPPORTS_64BIT_KERNEL |
| select SYS_SUPPORTS_BIG_ENDIAN |
| select SYS_SUPPORTS_LITTLE_ENDIAN |
| select SYS_SUPPORTS_MIPS_CMP |
| select SYS_SUPPORTS_MULTITHREADING |
| select SYS_SUPPORTS_SMARTMIPS |
| select SYS_SUPPORTS_ZBOOT |
| help |
| This enables support for the MIPS Technologies Malta evaluation |
| board. |
| |
| config MIPS_SEAD3 |
| bool "MIPS SEAD3 board" |
| select BOOT_ELF32 |
| select BOOT_RAW |
| select CEVT_R4K |
| select CSRC_R4K |
| select CPU_MIPSR2_IRQ_VI |
| select CPU_MIPSR2_IRQ_EI |
| select DMA_NONCOHERENT |
| select IRQ_CPU |
| select IRQ_GIC |
| select MIPS_BOARDS_GEN |
| select MIPS_CPU_SCACHE |
| select MIPS_MSC |
| select SYS_HAS_CPU_MIPS32_R1 |
| select SYS_HAS_CPU_MIPS32_R2 |
| select SYS_HAS_CPU_MIPS64_R1 |
| select SYS_HAS_EARLY_PRINTK |
| select SYS_SUPPORTS_32BIT_KERNEL |
| select SYS_SUPPORTS_64BIT_KERNEL |
| select SYS_SUPPORTS_BIG_ENDIAN |
| select SYS_SUPPORTS_LITTLE_ENDIAN |
| select SYS_SUPPORTS_SMARTMIPS |
| select USB_ARCH_HAS_EHCI |
| select USB_EHCI_BIG_ENDIAN_DESC |
| select USB_EHCI_BIG_ENDIAN_MMIO |
| help |
| This enables support for the MIPS Technologies SEAD3 evaluation |
| board. |
| |
| config NEC_MARKEINS |
| bool "NEC EMMA2RH Mark-eins board" |
| select SOC_EMMA2RH |
| select HW_HAS_PCI |
| help |
| This enables support for the NEC Electronics Mark-eins boards. |
| |
| config MACH_VR41XX |
| bool "NEC VR4100 series based machines" |
| select CEVT_R4K |
| select CSRC_R4K |
| select SYS_HAS_CPU_VR41XX |
| select ARCH_REQUIRE_GPIOLIB |
| |
| config NXP_STB220 |
| bool "NXP STB220 board" |
| select SOC_PNX833X |
| help |
| Support for NXP Semiconductors STB220 Development Board. |
| |
| config NXP_STB225 |
| bool "NXP 225 board" |
| select SOC_PNX833X |
| select SOC_PNX8335 |
| help |
| Support for NXP Semiconductors STB225 Development Board. |
| |
| config PNX8550_JBS |
| bool "NXP PNX8550 based JBS board" |
| select PNX8550 |
| select SYS_SUPPORTS_LITTLE_ENDIAN |
| |
| config PNX8550_STB810 |
| bool "NXP PNX8550 based STB810 board" |
| select PNX8550 |
| select SYS_SUPPORTS_LITTLE_ENDIAN |
| |
| config PMC_MSP |
| bool "PMC-Sierra MSP chipsets" |
| depends on EXPERIMENTAL |
| select CEVT_R4K |
| select CSRC_R4K |
| select DMA_NONCOHERENT |
| select SWAP_IO_SPACE |
| select NO_EXCEPT_FILL |
| select BOOT_RAW |
| select SYS_HAS_CPU_MIPS32_R1 |
| select SYS_HAS_CPU_MIPS32_R2 |
| select SYS_SUPPORTS_32BIT_KERNEL |
| select SYS_SUPPORTS_BIG_ENDIAN |
| select IRQ_CPU |
| select SERIAL_8250 |
| select SERIAL_8250_CONSOLE |
| help |
| This adds support for the PMC-Sierra family of Multi-Service |
| Processor System-On-A-Chips. These parts include a number |
| of integrated peripherals, interfaces and DSPs in addition to |
| a variety of MIPS cores. |
| |
| config PMC_YOSEMITE |
| bool "PMC-Sierra Yosemite eval board" |
| select CEVT_R4K |
| select CSRC_R4K |
| select DMA_COHERENT |
| select HW_HAS_PCI |
| select IRQ_CPU |
| select IRQ_CPU_RM7K |
| select IRQ_CPU_RM9K |
| select SWAP_IO_SPACE |
| select SYS_HAS_CPU_RM9000 |
| select SYS_HAS_EARLY_PRINTK |
| select SYS_SUPPORTS_32BIT_KERNEL |
| select SYS_SUPPORTS_64BIT_KERNEL |
| select SYS_SUPPORTS_BIG_ENDIAN |
| select SYS_SUPPORTS_HIGHMEM |
| select SYS_SUPPORTS_SMP |
| help |
| Yosemite is an evaluation board for the RM9000x2 processor |
| manufactured by PMC-Sierra. |
| |
| config POWERTV |
| bool "Cisco PowerTV" |
| select BOOT_ELF32 |
| select CEVT_R4K |
| select CPU_MIPSR2_IRQ_VI |
| select CPU_MIPSR2_IRQ_EI |
| select CSRC_POWERTV |
| select DMA_NONCOHERENT |
| select HW_HAS_PCI |
| select SYS_HAS_EARLY_PRINTK |
| select SYS_HAS_CPU_MIPS32_R2 |
| select SYS_SUPPORTS_32BIT_KERNEL |
| select SYS_SUPPORTS_BIG_ENDIAN |
| select SYS_SUPPORTS_HIGHMEM |
| select USB_OHCI_LITTLE_ENDIAN |
| help |
| This enables support for the Cisco PowerTV Platform. |
| |
| config SGI_IP22 |
| bool "SGI IP22 (Indy/Indigo2)" |
| select ARC |
| select ARC32 |
| select BOOT_ELF32 |
| select CEVT_R4K |
| select CSRC_R4K |
| select DEFAULT_SGI_PARTITION |
| select DMA_NONCOHERENT |
| select HW_HAS_EISA |
| select I8253 |
| select I8259 |
| select IP22_CPU_SCACHE |
| select IRQ_CPU |
| select GENERIC_ISA_DMA_SUPPORT_BROKEN |
| select SGI_HAS_I8042 |
| select SGI_HAS_INDYDOG |
| select SGI_HAS_HAL2 |
| select SGI_HAS_SEEQ |
| select SGI_HAS_WD93 |
| select SGI_HAS_ZILOG |
| select SWAP_IO_SPACE |
| select SYS_HAS_CPU_R4X00 |
| select SYS_HAS_CPU_R5000 |
| # |
| # Disable EARLY_PRINTK for now since it leads to overwritten prom |
| # memory during early boot on some machines. |
| # |
| # See http://www.linux-mips.org/cgi-bin/mesg.cgi?a=linux-mips&i=20091119164009.GA15038%40deprecation.cyrius.com |
| # for a more details discussion |
| # |
| # select SYS_HAS_EARLY_PRINTK |
| select SYS_SUPPORTS_32BIT_KERNEL |
| select SYS_SUPPORTS_64BIT_KERNEL |
| select SYS_SUPPORTS_BIG_ENDIAN |
| help |
| This are the SGI Indy, Challenge S and Indigo2, as well as certain |
| OEM variants like the Tandem CMN B006S. To compile a Linux kernel |
| that runs on these, say Y here. |
| |
| config SGI_IP27 |
| bool "SGI IP27 (Origin200/2000)" |
| select ARC |
| select ARC64 |
| select BOOT_ELF64 |
| select DEFAULT_SGI_PARTITION |
| select DMA_COHERENT |
| select SYS_HAS_EARLY_PRINTK |
| select HW_HAS_PCI |
| select NR_CPUS_DEFAULT_64 |
| select SYS_HAS_CPU_R10000 |
| select SYS_SUPPORTS_64BIT_KERNEL |
| select SYS_SUPPORTS_BIG_ENDIAN |
| select SYS_SUPPORTS_NUMA |
| select SYS_SUPPORTS_SMP |
| help |
| This are the SGI Origin 200, Origin 2000 and Onyx 2 Graphics |
| workstations. To compile a Linux kernel that runs on these, say Y |
| here. |
| |
| config SGI_IP28 |
| bool "SGI IP28 (Indigo2 R10k) (EXPERIMENTAL)" |
| depends on EXPERIMENTAL |
| select ARC |
| select ARC64 |
| select BOOT_ELF64 |
| select CEVT_R4K |
| select CSRC_R4K |
| select DEFAULT_SGI_PARTITION |
| select DMA_NONCOHERENT |
| select GENERIC_ISA_DMA_SUPPORT_BROKEN |
| select IRQ_CPU |
| select HW_HAS_EISA |
| select I8253 |
| select I8259 |
| select SGI_HAS_I8042 |
| select SGI_HAS_INDYDOG |
| select SGI_HAS_HAL2 |
| select SGI_HAS_SEEQ |
| select SGI_HAS_WD93 |
| select SGI_HAS_ZILOG |
| select SWAP_IO_SPACE |
| select SYS_HAS_CPU_R10000 |
| # |
| # Disable EARLY_PRINTK for now since it leads to overwritten prom |
| # memory during early boot on some machines. |
| # |
| # See http://www.linux-mips.org/cgi-bin/mesg.cgi?a=linux-mips&i=20091119164009.GA15038%40deprecation.cyrius.com |
| # for a more details discussion |
| # |
| # select SYS_HAS_EARLY_PRINTK |
| select SYS_SUPPORTS_64BIT_KERNEL |
| select SYS_SUPPORTS_BIG_ENDIAN |
| help |
| This is the SGI Indigo2 with R10000 processor. To compile a Linux |
| kernel that runs on these, say Y here. |
| |
| config SGI_IP32 |
| bool "SGI IP32 (O2)" |
| select ARC |
| select ARC32 |
| select BOOT_ELF32 |
| select CEVT_R4K |
| select CSRC_R4K |
| select DMA_NONCOHERENT |
| select HW_HAS_PCI |
| select IRQ_CPU |
| select R5000_CPU_SCACHE |
| select RM7000_CPU_SCACHE |
| select SYS_HAS_CPU_R5000 |
| select SYS_HAS_CPU_R10000 if BROKEN |
| select SYS_HAS_CPU_RM7000 |
| select SYS_HAS_CPU_NEVADA |
| select SYS_SUPPORTS_64BIT_KERNEL |
| select SYS_SUPPORTS_BIG_ENDIAN |
| help |
| If you want this kernel to run on SGI O2 workstation, say Y here. |
| |
| config SIBYTE_CRHINE |
| bool "Sibyte BCM91120C-CRhine" |
| depends on EXPERIMENTAL |
| select BOOT_ELF32 |
| select DMA_COHERENT |
| select SIBYTE_BCM1120 |
| select SWAP_IO_SPACE |
| select SYS_HAS_CPU_SB1 |
| select SYS_SUPPORTS_BIG_ENDIAN |
| select SYS_SUPPORTS_LITTLE_ENDIAN |
| |
| config SIBYTE_CARMEL |
| bool "Sibyte BCM91120x-Carmel" |
| depends on EXPERIMENTAL |
| select BOOT_ELF32 |
| select DMA_COHERENT |
| select SIBYTE_BCM1120 |
| select SWAP_IO_SPACE |
| select SYS_HAS_CPU_SB1 |
| select SYS_SUPPORTS_BIG_ENDIAN |
| select SYS_SUPPORTS_LITTLE_ENDIAN |
| |
| config SIBYTE_CRHONE |
| bool "Sibyte BCM91125C-CRhone" |
| depends on EXPERIMENTAL |
| select BOOT_ELF32 |
| select DMA_COHERENT |
| select SIBYTE_BCM1125 |
| select SWAP_IO_SPACE |
| select SYS_HAS_CPU_SB1 |
| select SYS_SUPPORTS_BIG_ENDIAN |
| select SYS_SUPPORTS_HIGHMEM |
| select SYS_SUPPORTS_LITTLE_ENDIAN |
| |
| config SIBYTE_RHONE |
| bool "Sibyte BCM91125E-Rhone" |
| depends on EXPERIMENTAL |
| select BOOT_ELF32 |
| select DMA_COHERENT |
| select SIBYTE_BCM1125H |
| select SWAP_IO_SPACE |
| select SYS_HAS_CPU_SB1 |
| select SYS_SUPPORTS_BIG_ENDIAN |
| select SYS_SUPPORTS_LITTLE_ENDIAN |
| |
| config SIBYTE_SWARM |
| bool "Sibyte BCM91250A-SWARM" |
| select BOOT_ELF32 |
| select DMA_COHERENT |
| select HAVE_PATA_PLATFORM |
| select NR_CPUS_DEFAULT_2 |
| select SIBYTE_SB1250 |
| select SWAP_IO_SPACE |
| select SYS_HAS_CPU_SB1 |
| select SYS_SUPPORTS_BIG_ENDIAN |
| select SYS_SUPPORTS_HIGHMEM |
| select SYS_SUPPORTS_LITTLE_ENDIAN |
| select ZONE_DMA32 if 64BIT |
| |
| config SIBYTE_LITTLESUR |
| bool "Sibyte BCM91250C2-LittleSur" |
| depends on EXPERIMENTAL |
| select BOOT_ELF32 |
| select DMA_COHERENT |
| select HAVE_PATA_PLATFORM |
| select NR_CPUS_DEFAULT_2 |
| select SIBYTE_SB1250 |
| select SWAP_IO_SPACE |
| select SYS_HAS_CPU_SB1 |
| select SYS_SUPPORTS_BIG_ENDIAN |
| select SYS_SUPPORTS_HIGHMEM |
| select SYS_SUPPORTS_LITTLE_ENDIAN |
| |
| config SIBYTE_SENTOSA |
| bool "Sibyte BCM91250E-Sentosa" |
| depends on EXPERIMENTAL |
| select BOOT_ELF32 |
| select DMA_COHERENT |
| select NR_CPUS_DEFAULT_2 |
| select SIBYTE_SB1250 |
| select SWAP_IO_SPACE |
| select SYS_HAS_CPU_SB1 |
| select SYS_SUPPORTS_BIG_ENDIAN |
| select SYS_SUPPORTS_LITTLE_ENDIAN |
| |
| config SIBYTE_BIGSUR |
| bool "Sibyte BCM91480B-BigSur" |
| select BOOT_ELF32 |
| select DMA_COHERENT |
| select NR_CPUS_DEFAULT_4 |
| select SIBYTE_BCM1x80 |
| select SWAP_IO_SPACE |
| select SYS_HAS_CPU_SB1 |
| select SYS_SUPPORTS_BIG_ENDIAN |
| select SYS_SUPPORTS_HIGHMEM |
| select SYS_SUPPORTS_LITTLE_ENDIAN |
| select ZONE_DMA32 if 64BIT |
| |
| config SNI_RM |
| bool "SNI RM200/300/400" |
| select ARC if CPU_LITTLE_ENDIAN |
| select ARC32 if CPU_LITTLE_ENDIAN |
| select SNIPROM if CPU_BIG_ENDIAN |
| select ARCH_MAY_HAVE_PC_FDC |
| select BOOT_ELF32 |
| select CEVT_R4K |
| select CSRC_R4K |
| select DEFAULT_SGI_PARTITION if CPU_BIG_ENDIAN |
| select DMA_NONCOHERENT |
| select GENERIC_ISA_DMA |
| select HAVE_PCSPKR_PLATFORM |
| select HW_HAS_EISA |
| select HW_HAS_PCI |
| select IRQ_CPU |
| select I8253 |
| select I8259 |
| select ISA |
| select SWAP_IO_SPACE if CPU_BIG_ENDIAN |
| select SYS_HAS_CPU_R4X00 |
| select SYS_HAS_CPU_R5000 |
| select SYS_HAS_CPU_R10000 |
| select R5000_CPU_SCACHE |
| select SYS_HAS_EARLY_PRINTK |
| select SYS_SUPPORTS_32BIT_KERNEL |
| select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL |
| select SYS_SUPPORTS_BIG_ENDIAN |
| select SYS_SUPPORTS_HIGHMEM |
| select SYS_SUPPORTS_LITTLE_ENDIAN |
| help |
| The SNI RM200/300/400 are MIPS-based machines manufactured by |
| Siemens Nixdorf Informationssysteme (SNI), parent company of Pyramid |
| Technology and now in turn merged with Fujitsu. Say Y here to |
| support this machine type. |
| |
| config MACH_TX39XX |
| bool "Toshiba TX39 series based machines" |
| |
| config MACH_TX49XX |
| bool "Toshiba TX49 series based machines" |
| |
| config MIKROTIK_RB532 |
| bool "Mikrotik RB532 boards" |
| select CEVT_R4K |
| select CSRC_R4K |
| select DMA_NONCOHERENT |
| select HW_HAS_PCI |
| select IRQ_CPU |
| select SYS_HAS_CPU_MIPS32_R1 |
| select SYS_SUPPORTS_32BIT_KERNEL |
| select SYS_SUPPORTS_LITTLE_ENDIAN |
| select SWAP_IO_SPACE |
| select BOOT_RAW |
| select ARCH_REQUIRE_GPIOLIB |
| help |
| Support the Mikrotik(tm) RouterBoard 532 series, |
| based on the IDT RC32434 SoC. |
| |
| config WR_PPMC |
| bool "Wind River PPMC board" |
| select CEVT_R4K |
| select CSRC_R4K |
| select IRQ_CPU |
| select BOOT_ELF32 |
| select DMA_NONCOHERENT |
| select HW_HAS_PCI |
| select PCI_GT64XXX_PCI0 |
| select SWAP_IO_SPACE |
| select SYS_HAS_CPU_MIPS32_R1 |
| select SYS_HAS_CPU_MIPS32_R2 |
| select SYS_HAS_CPU_MIPS64_R1 |
| select SYS_HAS_CPU_NEVADA |
| select SYS_HAS_CPU_RM7000 |
| select SYS_SUPPORTS_32BIT_KERNEL |
| select SYS_SUPPORTS_64BIT_KERNEL |
| select SYS_SUPPORTS_BIG_ENDIAN |
| select SYS_SUPPORTS_LITTLE_ENDIAN |
| help |
| This enables support for the Wind River MIPS32 4KC PPMC evaluation |
| board, which is based on GT64120 bridge chip. |
| |
| config CAVIUM_OCTEON_SIMULATOR |
| bool "Cavium Networks Octeon Simulator" |
| select CEVT_R4K |
| select 64BIT_PHYS_ADDR |
| select DMA_COHERENT |
| select SYS_SUPPORTS_64BIT_KERNEL |
| select SYS_SUPPORTS_BIG_ENDIAN |
| select SYS_SUPPORTS_HOTPLUG_CPU |
| select SYS_HAS_CPU_CAVIUM_OCTEON |
| select HOLES_IN_ZONE |
| help |
| The Octeon simulator is software performance model of the Cavium |
| Octeon Processor. It supports simulating Octeon processors on x86 |
| hardware. |
| |
| config CAVIUM_OCTEON_REFERENCE_BOARD |
| bool "Cavium Networks Octeon reference board" |
| select CEVT_R4K |
| select 64BIT_PHYS_ADDR |
| select DMA_COHERENT |
| select SYS_SUPPORTS_64BIT_KERNEL |
| select SYS_SUPPORTS_BIG_ENDIAN |
| select SYS_SUPPORTS_HOTPLUG_CPU |
| select SYS_HAS_EARLY_PRINTK |
| select SYS_HAS_CPU_CAVIUM_OCTEON |
| select SWAP_IO_SPACE |
| select HW_HAS_PCI |
| select ARCH_SUPPORTS_MSI |
| select ZONE_DMA32 |
| select USB_ARCH_HAS_OHCI |
| select USB_ARCH_HAS_EHCI |
| select HOLES_IN_ZONE |
| help |
| This option supports all of the Octeon reference boards from Cavium |
| Networks. It builds a kernel that dynamically determines the Octeon |
| CPU type and supports all known board reference implementations. |
| Some of the supported boards are: |
| EBT3000 |
| EBH3000 |
| EBH3100 |
| Thunder |
| Kodama |
| Hikari |
| Say Y here for most Octeon reference boards. |
| |
| config NLM_XLR_BOARD |
| bool "Netlogic XLR/XLS based systems" |
| depends on EXPERIMENTAL |
| select BOOT_ELF32 |
| select NLM_COMMON |
| select SYS_HAS_CPU_XLR |
| select SYS_SUPPORTS_SMP |
| select HW_HAS_PCI |
| select SWAP_IO_SPACE |
| select SYS_SUPPORTS_32BIT_KERNEL |
| select SYS_SUPPORTS_64BIT_KERNEL |
| select 64BIT_PHYS_ADDR |
| select SYS_SUPPORTS_BIG_ENDIAN |
| select SYS_SUPPORTS_HIGHMEM |
| select DMA_COHERENT |
| select NR_CPUS_DEFAULT_32 |
| select CEVT_R4K |
| select CSRC_R4K |
| select IRQ_CPU |
| select ARCH_SUPPORTS_MSI |
| select ZONE_DMA if 64BIT |
| select SYNC_R4K |
| select SYS_HAS_EARLY_PRINTK |
| select USB_ARCH_HAS_OHCI if USB_SUPPORT |
| select USB_ARCH_HAS_EHCI if USB_SUPPORT |
| help |
| Support for systems based on Netlogic XLR and XLS processors. |
| Say Y here if you have a XLR or XLS based board. |
| |
| config NLM_XLP_BOARD |
| bool "Netlogic XLP based systems" |
| depends on EXPERIMENTAL |
| select BOOT_ELF32 |
| select NLM_COMMON |
| select SYS_HAS_CPU_XLP |
| select SYS_SUPPORTS_SMP |
| select HW_HAS_PCI |
| select SYS_SUPPORTS_32BIT_KERNEL |
| select SYS_SUPPORTS_64BIT_KERNEL |
| select 64BIT_PHYS_ADDR |
| select SYS_SUPPORTS_BIG_ENDIAN |
| select SYS_SUPPORTS_LITTLE_ENDIAN |
| select SYS_SUPPORTS_HIGHMEM |
| select DMA_COHERENT |
| select NR_CPUS_DEFAULT_32 |
| select CEVT_R4K |
| select CSRC_R4K |
| select IRQ_CPU |
| select ZONE_DMA if 64BIT |
| select SYNC_R4K |
| select SYS_HAS_EARLY_PRINTK |
| select USE_OF |
| help |
| This board is based on Netlogic XLP Processor. |
| Say Y here if you have a XLP based board. |
| |
| endchoice |
| |
| source "arch/mips/alchemy/Kconfig" |
| source "arch/mips/ath79/Kconfig" |
| source "arch/mips/bcm47xx/Kconfig" |
| source "arch/mips/bcm63xx/Kconfig" |
| source "arch/mips/jazz/Kconfig" |
| source "arch/mips/jz4740/Kconfig" |
| source "arch/mips/lantiq/Kconfig" |
| source "arch/mips/lasat/Kconfig" |
| source "arch/mips/pmc-sierra/Kconfig" |
| source "arch/mips/powertv/Kconfig" |
| source "arch/mips/sgi-ip27/Kconfig" |
| source "arch/mips/sibyte/Kconfig" |
| source "arch/mips/txx9/Kconfig" |
| source "arch/mips/vr41xx/Kconfig" |
| source "arch/mips/cavium-octeon/Kconfig" |
| source "arch/mips/loongson/Kconfig" |
| source "arch/mips/loongson1/Kconfig" |
| source "arch/mips/netlogic/Kconfig" |
| |
| endmenu |
| |
| config RWSEM_GENERIC_SPINLOCK |
| bool |
| default y |
| |
| config RWSEM_XCHGADD_ALGORITHM |
| bool |
| |
| config ARCH_HAS_ILOG2_U32 |
| bool |
| default n |
| |
| config ARCH_HAS_ILOG2_U64 |
| bool |
| default n |
| |
| config GENERIC_HWEIGHT |
| bool |
| default y |
| |
| config GENERIC_CALIBRATE_DELAY |
| bool |
| default y |
| |
| config SCHED_OMIT_FRAME_POINTER |
| bool |
| default y |
| |
| # |
| # Select some configuration options automatically based on user selections. |
| # |
| config ARC |
| bool |
| |
| config ARCH_MAY_HAVE_PC_FDC |
| bool |
| |
| config BOOT_RAW |
| bool |
| |
| config CEVT_BCM1480 |
| bool |
| |
| config CEVT_DS1287 |
| bool |
| |
| config CEVT_GT641XX |
| bool |
| |
| config CEVT_R4K_LIB |
| bool |
| |
| config CEVT_R4K |
| select CEVT_R4K_LIB |
| bool |
| |
| config CEVT_SB1250 |
| bool |
| |
| config CEVT_TXX9 |
| bool |
| |
| config CSRC_BCM1480 |
| bool |
| |
| config CSRC_IOASIC |
| bool |
| |
| config CSRC_POWERTV |
| bool |
| |
| config CSRC_R4K_LIB |
| bool |
| |
| config CSRC_R4K |
| select CSRC_R4K_LIB |
| bool |
| |
| config CSRC_SB1250 |
| bool |
| |
| config GPIO_TXX9 |
| select GENERIC_GPIO |
| select ARCH_REQUIRE_GPIOLIB |
| bool |
| |
| config CFE |
| bool |
| |
| config ARCH_DMA_ADDR_T_64BIT |
| def_bool (HIGHMEM && 64BIT_PHYS_ADDR) || 64BIT |
| |
| config DMA_COHERENT |
| bool |
| |
| config DMA_NONCOHERENT |
| bool |
| select NEED_DMA_MAP_STATE |
| |
| config NEED_DMA_MAP_STATE |
| bool |
| |
| config SYS_HAS_EARLY_PRINTK |
| bool |
| |
| config HOTPLUG_CPU |
| bool "Support for hot-pluggable CPUs" |
| depends on SMP && HOTPLUG && SYS_SUPPORTS_HOTPLUG_CPU |
| help |
| Say Y here to allow turning CPUs off and on. CPUs can be |
| controlled through /sys/devices/system/cpu. |
| (Note: power management support will enable this option |
| automatically on SMP systems. ) |
| Say N if you want to disable CPU hotplug. |
| |
| config SYS_SUPPORTS_HOTPLUG_CPU |
| bool |
| |
| config I8259 |
| bool |
| |
| config MIPS_BONITO64 |
| bool |
| |
| config MIPS_MSC |
| bool |
| |
| config MIPS_NILE4 |
| bool |
| |
| config MIPS_DISABLE_OBSOLETE_IDE |
| bool |
| |
| config SYNC_R4K |
| bool |
| |
| config MIPS_MACHINE |
| def_bool n |
| |
| config NO_IOPORT |
| def_bool n |
| |
| config GENERIC_ISA_DMA |
| bool |
| select ZONE_DMA if GENERIC_ISA_DMA_SUPPORT_BROKEN=n |
| select ISA_DMA_API |
| |
| config GENERIC_ISA_DMA_SUPPORT_BROKEN |
| bool |
| select GENERIC_ISA_DMA |
| |
| config ISA_DMA_API |
| bool |
| |
| config GENERIC_GPIO |
| bool |
| |
| config HOLES_IN_ZONE |
| bool |
| |
| # |
| # Endianness selection. Sufficiently obscure so many users don't know what to |
| # answer,so we try hard to limit the available choices. Also the use of a |
| # choice statement should be more obvious to the user. |
| # |
| choice |
| prompt "Endianness selection" |
| help |
| Some MIPS machines can be configured for either little or big endian |
| byte order. These modes require different kernels and a different |
| Linux distribution. In general there is one preferred byteorder for a |
| particular system but some systems are just as commonly used in the |
| one or the other endianness. |
| |
| config CPU_BIG_ENDIAN |
| bool "Big endian" |
| depends on SYS_SUPPORTS_BIG_ENDIAN |
| |
| config CPU_LITTLE_ENDIAN |
| bool "Little endian" |
| depends on SYS_SUPPORTS_LITTLE_ENDIAN |
| help |
| |
| endchoice |
| |
| config EXPORT_UASM |
| bool |
| |
| config SYS_SUPPORTS_APM_EMULATION |
| bool |
| |
| config SYS_SUPPORTS_BIG_ENDIAN |
| bool |
| |
| config SYS_SUPPORTS_LITTLE_ENDIAN |
| bool |
| |
| config SYS_SUPPORTS_HUGETLBFS |
| bool |
| depends on CPU_SUPPORTS_HUGEPAGES && 64BIT |
| default y |
| |
| config IRQ_CPU |
| bool |
| |
| config IRQ_CPU_RM7K |
| bool |
| |
| config IRQ_CPU_RM9K |
| bool |
| |
| config IRQ_MSP_SLP |
| bool |
| |
| config IRQ_MSP_CIC |
| bool |
| |
| config IRQ_TXX9 |
| bool |
| |
| config IRQ_GT641XX |
| bool |
| |
| config IRQ_GIC |
| bool |
| |
| config MIPS_BOARDS_GEN |
| bool |
| |
| config PCI_GT64XXX_PCI0 |
| bool |
| |
| config NO_EXCEPT_FILL |
| bool |
| |
| config MIPS_RM9122 |
| bool |
| select SERIAL_RM9000 |
| |
| config SOC_EMMA2RH |
| bool |
| select CEVT_R4K |
| select CSRC_R4K |
| select DMA_NONCOHERENT |
| select IRQ_CPU |
| select SWAP_IO_SPACE |
| select SYS_HAS_CPU_R5500 |
| select SYS_SUPPORTS_32BIT_KERNEL |
| select SYS_SUPPORTS_64BIT_KERNEL |
| select SYS_SUPPORTS_BIG_ENDIAN |
| |
| config SOC_PNX833X |
| bool |
| select CEVT_R4K |
| select CSRC_R4K |
| select IRQ_CPU |
| select DMA_NONCOHERENT |
| select SYS_HAS_CPU_MIPS32_R2 |
| select SYS_SUPPORTS_32BIT_KERNEL |
| select SYS_SUPPORTS_LITTLE_ENDIAN |
| select SYS_SUPPORTS_BIG_ENDIAN |
| select GENERIC_GPIO |
| select CPU_MIPSR2_IRQ_VI |
| |
| config SOC_PNX8335 |
| bool |
| select SOC_PNX833X |
| |
| config PNX8550 |
| bool |
| select SOC_PNX8550 |
| |
| config SOC_PNX8550 |
| bool |
| select DMA_NONCOHERENT |
| select HW_HAS_PCI |
| select SYS_HAS_CPU_MIPS32_R1 |
| select SYS_HAS_EARLY_PRINTK |
| select SYS_SUPPORTS_32BIT_KERNEL |
| select GENERIC_GPIO |
| |
| config SWAP_IO_SPACE |
| bool |
| |
| config SERIAL_RM9000 |
| bool |
| |
| config SGI_HAS_INDYDOG |
| bool |
| |
| config SGI_HAS_HAL2 |
| bool |
| |
| config SGI_HAS_SEEQ |
| bool |
| |
| config SGI_HAS_WD93 |
| bool |
| |
| config SGI_HAS_ZILOG |
| bool |
| |
| config SGI_HAS_I8042 |
| bool |
| |
| config DEFAULT_SGI_PARTITION |
| bool |
| |
| config ARC32 |
| bool |
| |
| config SNIPROM |
| bool |
| |
| config BOOT_ELF32 |
| bool |
| |
| config MIPS_L1_CACHE_SHIFT |
| int |
| default "4" if MACH_DECSTATION || MIKROTIK_RB532 || PMC_MSP4200_EVAL |
| default "6" if MIPS_CPU_SCACHE |
| default "7" if SGI_IP22 || SGI_IP27 || SGI_IP28 || SNI_RM || CPU_CAVIUM_OCTEON |
| default "5" |
| |
| config HAVE_STD_PC_SERIAL_PORT |
| bool |
| |
| config ARC_CONSOLE |
| bool "ARC console support" |
| depends on SGI_IP22 || SGI_IP28 || (SNI_RM && CPU_LITTLE_ENDIAN) |
| |
| config ARC_MEMORY |
| bool |
| depends on MACH_JAZZ || SNI_RM || SGI_IP32 |
| default y |
| |
| config ARC_PROMLIB |
| bool |
| depends on MACH_JAZZ || SNI_RM || SGI_IP22 || SGI_IP28 || SGI_IP32 |
| default y |
| |
| config ARC64 |
| bool |
| |
| config BOOT_ELF64 |
| bool |
| |
| menu "CPU selection" |
| |
| choice |
| prompt "CPU type" |
| default CPU_R4X00 |
| |
| config CPU_LOONGSON2E |
| bool "Loongson 2E" |
| depends on SYS_HAS_CPU_LOONGSON2E |
| select CPU_LOONGSON2 |
| help |
| The Loongson 2E processor implements the MIPS III instruction set |
| with many extensions. |
| |
| It has an internal FPGA northbridge, which is compatible to |
| bonito64. |
| |
| config CPU_LOONGSON2F |
| bool "Loongson 2F" |
| depends on SYS_HAS_CPU_LOONGSON2F |
| select CPU_LOONGSON2 |
| select GENERIC_GPIO |
| select ARCH_REQUIRE_GPIOLIB |
| help |
| The Loongson 2F processor implements the MIPS III instruction set |
| with many extensions. |
| |
| Loongson2F have built-in DDR2 and PCIX controller. The PCIX controller |
| have a similar programming interface with FPGA northbridge used in |
| Loongson2E. |
| |
| config CPU_LOONGSON1B |
| bool "Loongson 1B" |
| depends on SYS_HAS_CPU_LOONGSON1B |
| select CPU_LOONGSON1 |
| help |
| The Loongson 1B is a 32-bit SoC, which implements the MIPS32 |
| release 2 instruction set. |
| |
| config CPU_MIPS32_R1 |
| bool "MIPS32 Release 1" |
| depends on SYS_HAS_CPU_MIPS32_R1 |
| select CPU_HAS_PREFETCH |
| select CPU_SUPPORTS_32BIT_KERNEL |
| select CPU_SUPPORTS_HIGHMEM |
| help |
| Choose this option to build a kernel for release 1 or later of the |
| MIPS32 architecture. Most modern embedded systems with a 32-bit |
| MIPS processor are based on a MIPS32 processor. If you know the |
| specific type of processor in your system, choose those that one |
| otherwise CPU_MIPS32_R1 is a safe bet for any MIPS32 system. |
| Release 2 of the MIPS32 architecture is available since several |
| years so chances are you even have a MIPS32 Release 2 processor |
| in which case you should choose CPU_MIPS32_R2 instead for better |
| performance. |
| |
| config CPU_MIPS32_R2 |
| bool "MIPS32 Release 2" |
| depends on SYS_HAS_CPU_MIPS32_R2 |
| select CPU_HAS_PREFETCH |
| select CPU_SUPPORTS_32BIT_KERNEL |
| select CPU_SUPPORTS_HIGHMEM |
| help |
| Choose this option to build a kernel for release 2 or later of the |
| MIPS32 architecture. Most modern embedded systems with a 32-bit |
| MIPS processor are based on a MIPS32 processor. If you know the |
| specific type of processor in your system, choose those that one |
| otherwise CPU_MIPS32_R1 is a safe bet for any MIPS32 system. |
| |
| config CPU_MIPS64_R1 |
| bool "MIPS64 Release 1" |
| depends on SYS_HAS_CPU_MIPS64_R1 |
| select CPU_HAS_PREFETCH |
| select CPU_SUPPORTS_32BIT_KERNEL |
| select CPU_SUPPORTS_64BIT_KERNEL |
| select CPU_SUPPORTS_HIGHMEM |
| select CPU_SUPPORTS_HUGEPAGES |
| help |
| Choose this option to build a kernel for release 1 or later of the |
| MIPS64 architecture. Many modern embedded systems with a 64-bit |
| MIPS processor are based on a MIPS64 processor. If you know the |
| specific type of processor in your system, choose those that one |
| otherwise CPU_MIPS64_R1 is a safe bet for any MIPS64 system. |
| Release 2 of the MIPS64 architecture is available since several |
| years so chances are you even have a MIPS64 Release 2 processor |
| in which case you should choose CPU_MIPS64_R2 instead for better |
| performance. |
| |
| config CPU_MIPS64_R2 |
| bool "MIPS64 Release 2" |
| depends on SYS_HAS_CPU_MIPS64_R2 |
| select CPU_HAS_PREFETCH |
| select CPU_SUPPORTS_32BIT_KERNEL |
| select CPU_SUPPORTS_64BIT_KERNEL |
| select CPU_SUPPORTS_HIGHMEM |
| select CPU_SUPPORTS_HUGEPAGES |
| help |
| Choose this option to build a kernel for release 2 or later of the |
| MIPS64 architecture. Many modern embedded systems with a 64-bit |
| MIPS processor are based on a MIPS64 processor. If you know the |
| specific type of processor in your system, choose those that one |
| otherwise CPU_MIPS64_R1 is a safe bet for any MIPS64 system. |
| |
| config CPU_R3000 |
| bool "R3000" |
| depends on SYS_HAS_CPU_R3000 |
| select CPU_HAS_WB |
| select CPU_SUPPORTS_32BIT_KERNEL |
| select CPU_SUPPORTS_HIGHMEM |
| help |
| Please make sure to pick the right CPU type. Linux/MIPS is not |
| designed to be generic, i.e. Kernels compiled for R3000 CPUs will |
| *not* work on R4000 machines and vice versa. However, since most |
| of the supported machines have an R4000 (or similar) CPU, R4x00 |
| might be a safe bet. If the resulting kernel does not work, |
| try to recompile with R3000. |
| |
| config CPU_TX39XX |
| bool "R39XX" |
| depends on SYS_HAS_CPU_TX39XX |
| select CPU_SUPPORTS_32BIT_KERNEL |
| |
| config CPU_VR41XX |
| bool "R41xx" |
| depends on SYS_HAS_CPU_VR41XX |
| select CPU_SUPPORTS_32BIT_KERNEL |
| select CPU_SUPPORTS_64BIT_KERNEL |
| help |
| The options selects support for the NEC VR4100 series of processors. |
| Only choose this option if you have one of these processors as a |
| kernel built with this option will not run on any other type of |
| processor or vice versa. |
| |
| config CPU_R4300 |
| bool "R4300" |
| depends on SYS_HAS_CPU_R4300 |
| select CPU_SUPPORTS_32BIT_KERNEL |
| select CPU_SUPPORTS_64BIT_KERNEL |
| help |
| MIPS Technologies R4300-series processors. |
| |
| config CPU_R4X00 |
| bool "R4x00" |
| depends on SYS_HAS_CPU_R4X00 |
| select CPU_SUPPORTS_32BIT_KERNEL |
| select CPU_SUPPORTS_64BIT_KERNEL |
| help |
| MIPS Technologies R4000-series processors other than 4300, including |
| the R4000, R4400, R4600, and 4700. |
| |
| config CPU_TX49XX |
| bool "R49XX" |
| depends on SYS_HAS_CPU_TX49XX |
| select CPU_HAS_PREFETCH |
| select CPU_SUPPORTS_32BIT_KERNEL |
| select CPU_SUPPORTS_64BIT_KERNEL |
| |
| config CPU_R5000 |
| bool "R5000" |
| depends on SYS_HAS_CPU_R5000 |
| select CPU_SUPPORTS_32BIT_KERNEL |
| select CPU_SUPPORTS_64BIT_KERNEL |
| help |
| MIPS Technologies R5000-series processors other than the Nevada. |
| |
| config CPU_R5432 |
| bool "R5432" |
| depends on SYS_HAS_CPU_R5432 |
| select CPU_SUPPORTS_32BIT_KERNEL |
| select CPU_SUPPORTS_64BIT_KERNEL |
| |
| config CPU_R5500 |
| bool "R5500" |
| depends on SYS_HAS_CPU_R5500 |
| select CPU_SUPPORTS_32BIT_KERNEL |
| select CPU_SUPPORTS_64BIT_KERNEL |
| select CPU_SUPPORTS_HUGEPAGES |
| help |
| NEC VR5500 and VR5500A series processors implement 64-bit MIPS IV |
| instruction set. |
| |
| config CPU_R6000 |
| bool "R6000" |
| depends on EXPERIMENTAL |
| depends on SYS_HAS_CPU_R6000 |
| select CPU_SUPPORTS_32BIT_KERNEL |
| help |
| MIPS Technologies R6000 and R6000A series processors. Note these |
| processors are extremely rare and the support for them is incomplete. |
| |
| config CPU_NEVADA |
| bool "RM52xx" |
| depends on SYS_HAS_CPU_NEVADA |
| select CPU_SUPPORTS_32BIT_KERNEL |
| select CPU_SUPPORTS_64BIT_KERNEL |
| help |
| QED / PMC-Sierra RM52xx-series ("Nevada") processors. |
| |
| config CPU_R8000 |
| bool "R8000" |
| depends on EXPERIMENTAL |
| depends on SYS_HAS_CPU_R8000 |
| select CPU_HAS_PREFETCH |
| select CPU_SUPPORTS_64BIT_KERNEL |
| help |
| MIPS Technologies R8000 processors. Note these processors are |
| uncommon and the support for them is incomplete. |
| |
| config CPU_R10000 |
| bool "R10000" |
| depends on SYS_HAS_CPU_R10000 |
| select CPU_HAS_PREFETCH |
| select CPU_SUPPORTS_32BIT_KERNEL |
| select CPU_SUPPORTS_64BIT_KERNEL |
| select CPU_SUPPORTS_HIGHMEM |
| help |
| MIPS Technologies R10000-series processors. |
| |
| config CPU_RM7000 |
| bool "RM7000" |
| depends on SYS_HAS_CPU_RM7000 |
| select CPU_HAS_PREFETCH |
| select CPU_SUPPORTS_32BIT_KERNEL |
| select CPU_SUPPORTS_64BIT_KERNEL |
| select CPU_SUPPORTS_HIGHMEM |
| |
| config CPU_RM9000 |
| bool "RM9000" |
| depends on SYS_HAS_CPU_RM9000 |
| select CPU_HAS_PREFETCH |
| select CPU_SUPPORTS_32BIT_KERNEL |
| select CPU_SUPPORTS_64BIT_KERNEL |
| select CPU_SUPPORTS_HIGHMEM |
| select WEAK_ORDERING |
| |
| config CPU_SB1 |
| bool "SB1" |
| depends on SYS_HAS_CPU_SB1 |
| select CPU_SUPPORTS_32BIT_KERNEL |
| select CPU_SUPPORTS_64BIT_KERNEL |
| select CPU_SUPPORTS_HIGHMEM |
| select WEAK_ORDERING |
| |
| config CPU_CAVIUM_OCTEON |
| bool "Cavium Octeon processor" |
| depends on SYS_HAS_CPU_CAVIUM_OCTEON |
| select ARCH_SPARSEMEM_ENABLE |
| select CPU_HAS_PREFETCH |
| select CPU_SUPPORTS_64BIT_KERNEL |
| select SYS_SUPPORTS_SMP |
| select NR_CPUS_DEFAULT_16 |
| select WEAK_ORDERING |
| select CPU_SUPPORTS_HIGHMEM |
| select CPU_SUPPORTS_HUGEPAGES |
| select LIBFDT |
| select USE_OF |
| help |
| The Cavium Octeon processor is a highly integrated chip containing |
| many ethernet hardware widgets for networking tasks. The processor |
| can have up to 16 Mips64v2 cores and 8 integrated gigabit ethernets. |
| Full details can be found at http://www.caviumnetworks.com. |
| |
| config CPU_BMIPS3300 |
| bool "BMIPS3300" |
| depends on SYS_HAS_CPU_BMIPS3300 |
| select CPU_BMIPS |
| help |
| Broadcom BMIPS3300 processors. |
| |
| config CPU_BMIPS4350 |
| bool "BMIPS4350" |
| depends on SYS_HAS_CPU_BMIPS4350 |
| select CPU_BMIPS |
| select SYS_SUPPORTS_SMP |
| select SYS_SUPPORTS_HOTPLUG_CPU |
| help |
| Broadcom BMIPS4350 ("VIPER") processors. |
| |
| config CPU_BMIPS4380 |
| bool "BMIPS4380" |
| depends on SYS_HAS_CPU_BMIPS4380 |
| select CPU_BMIPS |
| select SYS_SUPPORTS_SMP |
| select SYS_SUPPORTS_HOTPLUG_CPU |
| help |
| Broadcom BMIPS4380 processors. |
| |
| config CPU_BMIPS5000 |
| bool "BMIPS5000" |
| depends on SYS_HAS_CPU_BMIPS5000 |
| select CPU_BMIPS |
| select CPU_SUPPORTS_HIGHMEM |
| select MIPS_CPU_SCACHE |
| select SYS_SUPPORTS_SMP |
| select SYS_SUPPORTS_HOTPLUG_CPU |
| help |
| Broadcom BMIPS5000 processors. |
| |
| config CPU_XLR |
| bool "Netlogic XLR SoC" |
| depends on SYS_HAS_CPU_XLR |
| select CPU_SUPPORTS_32BIT_KERNEL |
| select CPU_SUPPORTS_64BIT_KERNEL |
| select CPU_SUPPORTS_HIGHMEM |
| select WEAK_ORDERING |
| select WEAK_REORDERING_BEYOND_LLSC |
| select CPU_SUPPORTS_HUGEPAGES |
| help |
| Netlogic Microsystems XLR/XLS processors. |
| |
| config CPU_XLP |
| bool "Netlogic XLP SoC" |
| depends on SYS_HAS_CPU_XLP |
| select CPU_SUPPORTS_32BIT_KERNEL |
| select CPU_SUPPORTS_64BIT_KERNEL |
| select CPU_SUPPORTS_HIGHMEM |
| select CPU_HAS_LLSC |
| select WEAK_ORDERING |
| select WEAK_REORDERING_BEYOND_LLSC |
| select CPU_HAS_PREFETCH |
| help |
| Netlogic Microsystems XLP processors. |
| endchoice |
| |
| if CPU_LOONGSON2F |
| config CPU_NOP_WORKAROUNDS |
| bool |
| |
| config CPU_JUMP_WORKAROUNDS |
| bool |
| |
| config CPU_LOONGSON2F_WORKAROUNDS |
| bool "Loongson 2F Workarounds" |
| default y |
| select CPU_NOP_WORKAROUNDS |
| select CPU_JUMP_WORKAROUNDS |
| help |
| Loongson 2F01 / 2F02 processors have the NOP & JUMP issues which |
| require workarounds. Without workarounds the system may hang |
| unexpectedly. For more information please refer to the gas |
| -mfix-loongson2f-nop and -mfix-loongson2f-jump options. |
| |
| Loongson 2F03 and later have fixed these issues and no workarounds |
| are needed. The workarounds have no significant side effect on them |
| but may decrease the performance of the system so this option should |
| be disabled unless the kernel is intended to be run on 2F01 or 2F02 |
| systems. |
| |
| If unsure, please say Y. |
| endif # CPU_LOONGSON2F |
| |
| config SYS_SUPPORTS_ZBOOT |
| bool |
| select HAVE_KERNEL_GZIP |
| select HAVE_KERNEL_BZIP2 |
| select HAVE_KERNEL_LZMA |
| select HAVE_KERNEL_LZO |
| |
| config SYS_SUPPORTS_ZBOOT_UART16550 |
| bool |
| select SYS_SUPPORTS_ZBOOT |
| |
| config CPU_LOONGSON2 |
| bool |
| select CPU_SUPPORTS_32BIT_KERNEL |
| select CPU_SUPPORTS_64BIT_KERNEL |
| select CPU_SUPPORTS_HIGHMEM |
| |
| config CPU_LOONGSON1 |
| bool |
| select CPU_MIPS32 |
| select CPU_MIPSR2 |
| select CPU_HAS_PREFETCH |
| select CPU_SUPPORTS_32BIT_KERNEL |
| select CPU_SUPPORTS_HIGHMEM |
| |
| config CPU_BMIPS |
| bool |
| select CPU_MIPS32 |
| select CPU_SUPPORTS_32BIT_KERNEL |
| select DMA_NONCOHERENT |
| select IRQ_CPU |
| select SWAP_IO_SPACE |
| select WEAK_ORDERING |
| |
| config SYS_HAS_CPU_LOONGSON2E |
| bool |
| |
| config SYS_HAS_CPU_LOONGSON2F |
| bool |
| select CPU_SUPPORTS_CPUFREQ |
| select CPU_SUPPORTS_ADDRWINCFG if 64BIT |
| select CPU_SUPPORTS_UNCACHED_ACCELERATED |
| |
| config SYS_HAS_CPU_LOONGSON1B |
| bool |
| |
| config SYS_HAS_CPU_MIPS32_R1 |
| bool |
| |
| config SYS_HAS_CPU_MIPS32_R2 |
| bool |
| |
| config SYS_HAS_CPU_MIPS64_R1 |
| bool |
| |
| config SYS_HAS_CPU_MIPS64_R2 |
| bool |
| |
| config SYS_HAS_CPU_R3000 |
| bool |
| |
| config SYS_HAS_CPU_TX39XX |
| bool |
| |
| config SYS_HAS_CPU_VR41XX |
| bool |
| |
| config SYS_HAS_CPU_R4300 |
| bool |
| |
| config SYS_HAS_CPU_R4X00 |
| bool |
| |
| config SYS_HAS_CPU_TX49XX |
| bool |
| |
| config SYS_HAS_CPU_R5000 |
| bool |
| |
| config SYS_HAS_CPU_R5432 |
| bool |
| |
| config SYS_HAS_CPU_R5500 |
| bool |
| |
| config SYS_HAS_CPU_R6000 |
| bool |
| |
| config SYS_HAS_CPU_NEVADA |
| bool |
| |
| config SYS_HAS_CPU_R8000 |
| bool |
| |
| config SYS_HAS_CPU_R10000 |
| bool |
| |
| config SYS_HAS_CPU_RM7000 |
| bool |
| |
| config SYS_HAS_CPU_RM9000 |
| bool |
| |
| config SYS_HAS_CPU_SB1 |
| bool |
| |
| config SYS_HAS_CPU_CAVIUM_OCTEON |
| bool |
| |
| config SYS_HAS_CPU_BMIPS3300 |
| bool |
| |
| config SYS_HAS_CPU_BMIPS4350 |
| bool |
| |
| config SYS_HAS_CPU_BMIPS4380 |
| bool |
| |
| config SYS_HAS_CPU_BMIPS5000 |
| bool |
| |
| config SYS_HAS_CPU_XLR |
| bool |
| |
| config SYS_HAS_CPU_XLP |
| bool |
| |
| # |
| # CPU may reorder R->R, R->W, W->R, W->W |
| # Reordering beyond LL and SC is handled in WEAK_REORDERING_BEYOND_LLSC |
| # |
| config WEAK_ORDERING |
| bool |
| |
| # |
| # CPU may reorder reads and writes beyond LL/SC |
| # CPU may reorder R->LL, R->LL, W->LL, W->LL, R->SC, R->SC, W->SC, W->SC |
| # |
| config WEAK_REORDERING_BEYOND_LLSC |
| bool |
| endmenu |
| |
| # |
| # These two indicate any level of the MIPS32 and MIPS64 architecture |
| # |
| config CPU_MIPS32 |
| bool |
| default y if CPU_MIPS32_R1 || CPU_MIPS32_R2 |
| |
| config CPU_MIPS64 |
| bool |
| default y if CPU_MIPS64_R1 || CPU_MIPS64_R2 |
| |
| # |
| # These two indicate the revision of the architecture, either Release 1 or Release 2 |
| # |
| config CPU_MIPSR1 |
| bool |
| default y if CPU_MIPS32_R1 || CPU_MIPS64_R1 |
| |
| config CPU_MIPSR2 |
| bool |
| default y if CPU_MIPS32_R2 || CPU_MIPS64_R2 || CPU_CAVIUM_OCTEON |
| |
| config SYS_SUPPORTS_32BIT_KERNEL |
| bool |
| config SYS_SUPPORTS_64BIT_KERNEL |
| bool |
| config CPU_SUPPORTS_32BIT_KERNEL |
| bool |
| config CPU_SUPPORTS_64BIT_KERNEL |
| bool |
| config CPU_SUPPORTS_CPUFREQ |
| bool |
| config CPU_SUPPORTS_ADDRWINCFG |
| bool |
| config CPU_SUPPORTS_HUGEPAGES |
| bool |
| config CPU_SUPPORTS_UNCACHED_ACCELERATED |
| bool |
| config MIPS_PGD_C0_CONTEXT |
| bool |
| default y if 64BIT && CPU_MIPSR2 |
| |
| # |
| # Set to y for ptrace access to watch registers. |
| # |
| config HARDWARE_WATCHPOINTS |
| bool |
| default y if CPU_MIPSR1 || CPU_MIPSR2 |
| |
| menu "Kernel type" |
| |
| choice |
| prompt "Kernel code model" |
| help |
| You should only select this option if you have a workload that |
| actually benefits from 64-bit processing or if your machine has |
| large memory. You will only be presented a single option in this |
| menu if your system does not support both 32-bit and 64-bit kernels. |
| |
| config 32BIT |
| bool "32-bit kernel" |
| depends on CPU_SUPPORTS_32BIT_KERNEL && SYS_SUPPORTS_32BIT_KERNEL |
| select TRAD_SIGNALS |
| help |
| Select this option if you want to build a 32-bit kernel. |
| config 64BIT |
| bool "64-bit kernel" |
| depends on CPU_SUPPORTS_64BIT_KERNEL && SYS_SUPPORTS_64BIT_KERNEL |
| select HAVE_SYSCALL_WRAPPERS |
| help |
| Select this option if you want to build a 64-bit kernel. |
| |
| endchoice |
| |
| choice |
| prompt "Kernel page size" |
| default PAGE_SIZE_4KB |
| |
| config PAGE_SIZE_4KB |
| bool "4kB" |
| depends on !CPU_LOONGSON2 |
| help |
| This option select the standard 4kB Linux page size. On some |
| R3000-family processors this is the only available page size. Using |
| 4kB page size will minimize memory consumption and is therefore |
| recommended for low memory systems. |
| |
| config PAGE_SIZE_8KB |
| bool "8kB" |
| depends on (EXPERIMENTAL && CPU_R8000) || CPU_CAVIUM_OCTEON |
| help |
| Using 8kB page size will result in higher performance kernel at |
| the price of higher memory consumption. This option is available |
| only on R8000 and cnMIPS processors. Note that you will need a |
| suitable Linux distribution to support this. |
| |
| config PAGE_SIZE_16KB |
| bool "16kB" |
| depends on !CPU_R3000 && !CPU_TX39XX |
| help |
| Using 16kB page size will result in higher performance kernel at |
| the price of higher memory consumption. This option is available on |
| all non-R3000 family processors. Note that you will need a suitable |
| Linux distribution to support this. |
| |
| config PAGE_SIZE_32KB |
| bool "32kB" |
| depends on CPU_CAVIUM_OCTEON |
| help |
| Using 32kB page size will result in higher performance kernel at |
| the price of higher memory consumption. This option is available |
| only on cnMIPS cores. Note that you will need a suitable Linux |
| distribution to support this. |
| |
| config PAGE_SIZE_64KB |
| bool "64kB" |
| depends on EXPERIMENTAL && !CPU_R3000 && !CPU_TX39XX |
| help |
| Using 64kB page size will result in higher performance kernel at |
| the price of higher memory consumption. This option is available on |
| all non-R3000 family processor. Not that at the time of this |
| writing this option is still high experimental. |
| |
| endchoice |
| |
| config FORCE_MAX_ZONEORDER |
| int "Maximum zone order" |
| range 14 64 if HUGETLB_PAGE && PAGE_SIZE_64KB |
| default "14" if HUGETLB_PAGE && PAGE_SIZE_64KB |
| range 13 64 if HUGETLB_PAGE && PAGE_SIZE_32KB |
| default "13" if HUGETLB_PAGE && PAGE_SIZE_32KB |
| range 12 64 if HUGETLB_PAGE && PAGE_SIZE_16KB |
| default "12" if HUGETLB_PAGE && PAGE_SIZE_16KB |
| range 11 64 |
| default "11" |
| help |
| The kernel memory allocator divides physically contiguous memory |
| blocks into "zones", where each zone is a power of two number of |
| pages. This option selects the largest power of two that the kernel |
| keeps in the memory allocator. If you need to allocate very large |
| blocks of physically contiguous memory, then you may need to |
| increase this value. |
| |
| This config option is actually maximum order plus one. For example, |
| a value of 11 means that the largest free memory block is 2^10 pages. |
| |
| The page size is not necessarily 4KB. Keep this in mind |
| when choosing a value for this option. |
| |
| config BOARD_SCACHE |
| bool |
| |
| config IP22_CPU_SCACHE |
| bool |
| select BOARD_SCACHE |
| |
| # |
| # Support for a MIPS32 / MIPS64 style S-caches |
| # |
| config MIPS_CPU_SCACHE |
| bool |
| select BOARD_SCACHE |
| |
| config R5000_CPU_SCACHE |
| bool |
| select BOARD_SCACHE |
| |
| config RM7000_CPU_SCACHE |
| bool |
| select BOARD_SCACHE |
| |
| config SIBYTE_DMA_PAGEOPS |
| bool "Use DMA to clear/copy pages" |
| depends on CPU_SB1 |
| help |
| Instead of using the CPU to zero and copy pages, use a Data Mover |
| channel. These DMA channels are otherwise unused by the standard |
| SiByte Linux port. Seems to give a small performance benefit. |
| |
| config CPU_HAS_PREFETCH |
| bool |
| |
| config CPU_GENERIC_DUMP_TLB |
| bool |
| default y if !(CPU_R3000 || CPU_R6000 || CPU_R8000 || CPU_TX39XX) |
| |
| config CPU_R4K_FPU |
| bool |
| default y if !(CPU_R3000 || CPU_R6000 || CPU_TX39XX || CPU_CAVIUM_OCTEON) |
| |
| config CPU_R4K_CACHE_TLB |
| bool |
| default y if !(CPU_R3000 || CPU_R8000 || CPU_SB1 || CPU_TX39XX || CPU_CAVIUM_OCTEON) |
| |
| choice |
| prompt "MIPS MT options" |
| |
| config MIPS_MT_DISABLED |
| bool "Disable multithreading support." |
| help |
| Use this option if your workload can't take advantage of |
| MIPS hardware multithreading support. On systems that don't have |
| the option of an MT-enabled processor this option will be the only |
| option in this menu. |
| |
| config MIPS_MT_SMP |
| bool "Use 1 TC on each available VPE for SMP" |
| depends on SYS_SUPPORTS_MULTITHREADING |
| select CPU_MIPSR2_IRQ_VI |
| select CPU_MIPSR2_IRQ_EI |
| select MIPS_MT |
| select NR_CPUS_DEFAULT_2 |
| select SMP |
| select SYS_SUPPORTS_SCHED_SMT if SMP |
| select SYS_SUPPORTS_SMP |
| select SMP_UP |
| select MIPS_PERF_SHARED_TC_COUNTERS |
| help |
| This is a kernel model which is known a VSMP but lately has been |
| marketesed into SMVP. |
| Virtual SMP uses the processor's VPEs to implement virtual |
| processors. In currently available configuration of the 34K processor |
| this allows for a dual processor. Both processors will share the same |
| primary caches; each will obtain the half of the TLB for it's own |
| exclusive use. For a layman this model can be described as similar to |
| what Intel calls Hyperthreading. |
| |
| For further information see http://www.linux-mips.org/wiki/34K#VSMP |
| |
| config MIPS_MT_SMTC |
| bool "SMTC: Use all TCs on all VPEs for SMP" |
| depends on CPU_MIPS32_R2 |
| #depends on CPU_MIPS64_R2 # once there is hardware ... |
| depends on SYS_SUPPORTS_MULTITHREADING |
| select CPU_MIPSR2_IRQ_VI |
| select CPU_MIPSR2_IRQ_EI |
| select MIPS_MT |
| select NR_CPUS_DEFAULT_8 |
| select SMP |
| select SYS_SUPPORTS_SMP |
| select SMP_UP |
| help |
| This is a kernel model which is known a SMTC or lately has been |
| marketesed into SMVP. |
| is presenting the available TC's of the core as processors to Linux. |
| On currently available 34K processors this means a Linux system will |
| see up to 5 processors. The implementation of the SMTC kernel differs |
| significantly from VSMP and cannot efficiently coexist in the same |
| kernel binary so the choice between VSMP and SMTC is a compile time |
| decision. |
| |
| For further information see http://www.linux-mips.org/wiki/34K#SMTC |
| |
| endchoice |
| |
| config MIPS_MT |
| bool |
| |
| config SCHED_SMT |
| bool "SMT (multithreading) scheduler support" |
| depends on SYS_SUPPORTS_SCHED_SMT |
| default n |
| help |
| SMT scheduler support improves the CPU scheduler's decision making |
| when dealing with MIPS MT enabled cores at a cost of slightly |
| increased overhead in some places. If unsure say N here. |
| |
| config SYS_SUPPORTS_SCHED_SMT |
| bool |
| |
| config SYS_SUPPORTS_MULTITHREADING |
| bool |
| |
| config MIPS_MT_FPAFF |
| bool "Dynamic FPU affinity for FP-intensive threads" |
| default y |
| depends on MIPS_MT_SMP || MIPS_MT_SMTC |
| |
| config MIPS_VPE_LOADER |
| bool "VPE loader support." |
| depends on SYS_SUPPORTS_MULTITHREADING |
| select CPU_MIPSR2_IRQ_VI |
| select CPU_MIPSR2_IRQ_EI |
| select MIPS_MT |
| help |
| Includes a loader for loading an elf relocatable object |
| onto another VPE and running it. |
| |
| config MIPS_MT_SMTC_IM_BACKSTOP |
| bool "Use per-TC register bits as backstop for inhibited IM bits" |
| depends on MIPS_MT_SMTC |
| default n |
| help |
| To support multiple TC microthreads acting as "CPUs" within |
| a VPE, VPE-wide interrupt mask bits must be specially manipulated |
| during interrupt handling. To support legacy drivers and interrupt |
| controller management code, SMTC has a "backstop" to track and |
| if necessary restore the interrupt mask. This has some performance |
| impact on interrupt service overhead. |
| |
| config MIPS_MT_SMTC_IRQAFF |
| bool "Support IRQ affinity API" |
| depends on MIPS_MT_SMTC |
| default n |
| help |
| Enables SMP IRQ affinity API (/proc/irq/*/smp_affinity, etc.) |
| for SMTC Linux kernel. Requires platform support, of which |
| an example can be found in the MIPS kernel i8259 and Malta |
| platform code. Adds some overhead to interrupt dispatch, and |
| should be used only if you know what you are doing. |
| |
| config MIPS_VPE_LOADER_TOM |
| bool "Load VPE program into memory hidden from linux" |
| depends on MIPS_VPE_LOADER |
| default y |
| help |
| The loader can use memory that is present but has been hidden from |
| Linux using the kernel command line option "mem=xxMB". It's up to |
| you to ensure the amount you put in the option and the space your |
| program requires is less or equal to the amount physically present. |
| |
| # this should possibly be in drivers/char, but it is rather cpu related. Hmmm |
| config MIPS_VPE_APSP_API |
| bool "Enable support for AP/SP API (RTLX)" |
| depends on MIPS_VPE_LOADER |
| help |
| |
| config MIPS_CMP |
| bool "MIPS CMP framework support" |
| depends on SYS_SUPPORTS_MIPS_CMP |
| select SYNC_R4K |
| select SYS_SUPPORTS_SMP |
| select SYS_SUPPORTS_SCHED_SMT if SMP |
| select WEAK_ORDERING |
| default n |
| help |
| This is a placeholder option for the GCMP work. It will need to |
| be handled differently... |
| |
| config SB1_PASS_1_WORKAROUNDS |
| bool |
| depends on CPU_SB1_PASS_1 |
| default y |
| |
| config SB1_PASS_2_WORKAROUNDS |
| bool |
| depends on CPU_SB1 && (CPU_SB1_PASS_2_2 || CPU_SB1_PASS_2) |
| default y |
| |
| config SB1_PASS_2_1_WORKAROUNDS |
| bool |
| depends on CPU_SB1 && CPU_SB1_PASS_2 |
| default y |
| |
| config 64BIT_PHYS_ADDR |
| bool |
| |
| config ARCH_PHYS_ADDR_T_64BIT |
| def_bool 64BIT_PHYS_ADDR |
| |
| config CPU_HAS_SMARTMIPS |
| depends on SYS_SUPPORTS_SMARTMIPS |
| bool "Support for the SmartMIPS ASE" |
| help |
| SmartMIPS is a extension of the MIPS32 architecture aimed at |
| increased security at both hardware and software level for |
| smartcards. Enabling this option will allow proper use of the |
| SmartMIPS instructions by Linux applications. However a kernel with |
| this option will not work on a MIPS core without SmartMIPS core. If |
| you don't know you probably don't have SmartMIPS and should say N |
| here. |
| |
| config CPU_HAS_WB |
| bool |
| |
| config XKS01 |
| bool |
| |
| # |
| # Vectored interrupt mode is an R2 feature |
| # |
| config CPU_MIPSR2_IRQ_VI |
| bool |
| |
| # |
| # Extended interrupt mode is an R2 feature |
| # |
| config CPU_MIPSR2_IRQ_EI |
| bool |
| |
| config CPU_HAS_SYNC |
| bool |
| depends on !CPU_R3000 |
| default y |
| |
| # |
| # CPU non-features |
| # |
| config CPU_DADDI_WORKAROUNDS |
| bool |
| |
| config CPU_R4000_WORKAROUNDS |
| bool |
| select CPU_R4400_WORKAROUNDS |
| |
| config CPU_R4400_WORKAROUNDS |
| bool |
| |
| # |
| # - Highmem only makes sense for the 32-bit kernel. |
| # - The current highmem code will only work properly on physically indexed |
| # caches such as R3000, SB1, R7000 or those that look like they're virtually |
| # indexed such as R4000/R4400 SC and MC versions or R10000. So for the |
| # moment we protect the user and offer the highmem option only on machines |
| # where it's known to be safe. This will not offer highmem on a few systems |
| # such as MIPS32 and MIPS64 CPUs which may have virtual and physically |
| # indexed CPUs but we're playing safe. |
| # - We use SYS_SUPPORTS_HIGHMEM to offer highmem only for systems where we |
| # know they might have memory configurations that could make use of highmem |
| # support. |
| # |
| config HIGHMEM |
| bool "High Memory Support" |
| depends on 32BIT && CPU_SUPPORTS_HIGHMEM && SYS_SUPPORTS_HIGHMEM |
| |
| config CPU_SUPPORTS_HIGHMEM |
| bool |
| |
| config SYS_SUPPORTS_HIGHMEM |
| bool |
| |
| config SYS_SUPPORTS_SMARTMIPS |
| bool |
| |
| config ARCH_FLATMEM_ENABLE |
| def_bool y |
| depends on !NUMA && !CPU_LOONGSON2 |
| |
| config ARCH_DISCONTIGMEM_ENABLE |
| bool |
| default y if SGI_IP27 |
| help |
| Say Y to support efficient handling of discontiguous physical memory, |
| for architectures which are either NUMA (Non-Uniform Memory Access) |
| or have huge holes in the physical address space for other reasons. |
| See <file:Documentation/vm/numa> for more. |
| |
| config ARCH_SPARSEMEM_ENABLE |
| bool |
| select SPARSEMEM_STATIC |
| |
| config NUMA |
| bool "NUMA Support" |
| depends on SYS_SUPPORTS_NUMA |
| help |
| Say Y to compile the kernel to support NUMA (Non-Uniform Memory |
| Access). This option improves performance on systems with more |
| than two nodes; on two node systems it is generally better to |
| leave it disabled; on single node systems disable this option |
| disabled. |
| |
| config SYS_SUPPORTS_NUMA |
| bool |
| |
| config NODES_SHIFT |
| int |
| default "6" |
| depends on NEED_MULTIPLE_NODES |
| |
| config HW_PERF_EVENTS |
| bool "Enable hardware performance counter support for perf events" |
| depends on PERF_EVENTS && !MIPS_MT_SMTC && OPROFILE=n && (CPU_MIPS32 || CPU_MIPS64 || CPU_R10000 || CPU_SB1 || CPU_CAVIUM_OCTEON) |
| default y |
| help |
| Enable hardware performance counter support for perf events. If |
| disabled, perf events will use software events only. |
| |
| source "mm/Kconfig" |
| |
| config SMP |
| bool "Multi-Processing support" |
| depends on SYS_SUPPORTS_SMP |
| select IRQ_PER_CPU |
| select USE_GENERIC_SMP_HELPERS |
| help |
| This enables support for systems with more than one CPU. If you have |
| a system with only one CPU, like most personal computers, say N. If |
| you have a system with more than one CPU, say Y. |
| |
| If you say N here, the kernel will run on single and multiprocessor |
| machines, but will use only one CPU of a multiprocessor machine. If |
| you say Y here, the kernel will run on many, but not all, |
| singleprocessor machines. On a singleprocessor machine, the kernel |
| will run faster if you say N here. |
| |
| People using multiprocessor machines who say Y here should also say |
| Y to "Enhanced Real Time Clock Support", below. |
| |
| See also the SMP-HOWTO available at |
| <http://www.tldp.org/docs.html#howto>. |
| |
| If you don't know what to do here, say N. |
| |
| config SMP_UP |
| bool |
| |
| config SYS_SUPPORTS_MIPS_CMP |
| bool |
| |
| config SYS_SUPPORTS_SMP |
| bool |
| |
| config NR_CPUS_DEFAULT_1 |
| bool |
| |
| config NR_CPUS_DEFAULT_2 |
| bool |
| |
| config NR_CPUS_DEFAULT_4 |
| bool |
| |
| config NR_CPUS_DEFAULT_8 |
| bool |
| |
| config NR_CPUS_DEFAULT_16 |
| bool |
| |
| config NR_CPUS_DEFAULT_32 |
| bool |
| |
| config NR_CPUS_DEFAULT_64 |
| bool |
| |
| config NR_CPUS |
| int "Maximum number of CPUs (2-64)" |
| range 1 64 if NR_CPUS_DEFAULT_1 |
| depends on SMP |
| default "1" if NR_CPUS_DEFAULT_1 |
| default "2" if NR_CPUS_DEFAULT_2 |
| default "4" if NR_CPUS_DEFAULT_4 |
| default "8" if NR_CPUS_DEFAULT_8 |
| default "16" if NR_CPUS_DEFAULT_16 |
| default "32" if NR_CPUS_DEFAULT_32 |
| default "64" if NR_CPUS_DEFAULT_64 |
| help |
| This allows you to specify the maximum number of CPUs which this |
| kernel will support. The maximum supported value is 32 for 32-bit |
| kernel and 64 for 64-bit kernels; the minimum value which makes |
| sense is 1 for Qemu (useful only for kernel debugging purposes) |
| and 2 for all others. |
| |
| This is purely to save memory - each supported CPU adds |
| approximately eight kilobytes to the kernel image. For best |
| performance should round up your number of processors to the next |
| power of two. |
| |
| config MIPS_PERF_SHARED_TC_COUNTERS |
| bool |
| |
| # |
| # Timer Interrupt Frequency Configuration |
| # |
| |
| choice |
| prompt "Timer frequency" |
| default HZ_250 |
| help |
| Allows the configuration of the timer frequency. |
| |
| config HZ_48 |
| bool "48 HZ" if SYS_SUPPORTS_48HZ || SYS_SUPPORTS_ARBIT_HZ |
| |
| config HZ_100 |
| bool "100 HZ" if SYS_SUPPORTS_100HZ || SYS_SUPPORTS_ARBIT_HZ |
| |
| config HZ_128 |
| bool "128 HZ" if SYS_SUPPORTS_128HZ || SYS_SUPPORTS_ARBIT_HZ |
| |
| config HZ_250 |
| bool "250 HZ" if SYS_SUPPORTS_250HZ || SYS_SUPPORTS_ARBIT_HZ |
| |
| config HZ_256 |
| bool "256 HZ" if SYS_SUPPORTS_256HZ || SYS_SUPPORTS_ARBIT_HZ |
| |
| config HZ_1000 |
| bool "1000 HZ" if SYS_SUPPORTS_1000HZ || SYS_SUPPORTS_ARBIT_HZ |
| |
| config HZ_1024 |
| bool "1024 HZ" if SYS_SUPPORTS_1024HZ || SYS_SUPPORTS_ARBIT_HZ |
| |
| endchoice |
| |
| config SYS_SUPPORTS_48HZ |
| bool |
| |
| config SYS_SUPPORTS_100HZ |
| bool |
| |
| config SYS_SUPPORTS_128HZ |
| bool |
| |
| config SYS_SUPPORTS_250HZ |
| bool |
| |
| config SYS_SUPPORTS_256HZ |
| bool |
| |
| config SYS_SUPPORTS_1000HZ |
| bool |
| |
| config SYS_SUPPORTS_1024HZ |
| bool |
| |
| config SYS_SUPPORTS_ARBIT_HZ |
| bool |
| default y if !SYS_SUPPORTS_48HZ && !SYS_SUPPORTS_100HZ && \ |
| !SYS_SUPPORTS_128HZ && !SYS_SUPPORTS_250HZ && \ |
| !SYS_SUPPORTS_256HZ && !SYS_SUPPORTS_1000HZ && \ |
| !SYS_SUPPORTS_1024HZ |
| |
| config HZ |
| int |
| default 48 if HZ_48 |
| default 100 if HZ_100 |
| default 128 if HZ_128 |
| default 250 if HZ_250 |
| default 256 if HZ_256 |
| default 1000 if HZ_1000 |
| default 1024 if HZ_1024 |
| |
| source "kernel/Kconfig.preempt" |
| |
| config KEXEC |
| bool "Kexec system call (EXPERIMENTAL)" |
| depends on EXPERIMENTAL |
| help |
| kexec is a system call that implements the ability to shutdown your |
| current kernel, and to start another kernel. It is like a reboot |
| but it is independent of the system firmware. And like a reboot |
| you can start any kernel with it, not just Linux. |
| |
| The name comes from the similarity to the exec system call. |
| |
| It is an ongoing process to be certain the hardware in a machine |
| is properly shutdown, so do not be surprised if this code does not |
| initially work for you. It may help to enable device hotplugging |
| support. As of this writing the exact hardware interface is |
| strongly in flux, so no good recommendation can be made. |
| |
| config SECCOMP |
| bool "Enable seccomp to safely compute untrusted bytecode" |
| depends on PROC_FS |
| default y |
| help |
| This kernel feature is useful for number crunching applications |
| that may need to compute untrusted bytecode during their |
| execution. By using pipes or other transports made available to |
| the process as file descriptors supporting the read/write |
| syscalls, it's possible to isolate those applications in |
| their own address space using seccomp. Once seccomp is |
| enabled via /proc/<pid>/seccomp, it cannot be disabled |
| and the task is only allowed to execute a few safe syscalls |
| defined by each seccomp mode. |
| |
| If unsure, say Y. Only embedded should say N here. |
| |
| config USE_OF |
| bool |
| select OF |
| select OF_EARLY_FLATTREE |
| select IRQ_DOMAIN |
| |
| endmenu |
| |
| config LOCKDEP_SUPPORT |
| bool |
| default y |
| |
| config STACKTRACE_SUPPORT |
| bool |
| default y |
| |
| source "init/Kconfig" |
| |
| source "kernel/Kconfig.freezer" |
| |
| menu "Bus options (PCI, PCMCIA, EISA, ISA, TC)" |
| |
| config HW_HAS_EISA |
| bool |
| config HW_HAS_PCI |
| bool |
| |
| config PCI |
| bool "Support for PCI controller" |
| depends on HW_HAS_PCI |
| select PCI_DOMAINS |
| select GENERIC_PCI_IOMAP |
| select NO_GENERIC_PCI_IOPORT_MAP |
| help |
| Find out whether you have a PCI motherboard. PCI is the name of a |
| bus system, i.e. the way the CPU talks to the other stuff inside |
| your box. Other bus systems are ISA, EISA, or VESA. If you have PCI, |
| say Y, otherwise N. |
| |
| config PCI_DOMAINS |
| bool |
| |
| source "drivers/pci/Kconfig" |
| |
| source "drivers/pci/pcie/Kconfig" |
| |
| # |
| # ISA support is now enabled via select. Too many systems still have the one |
| # or other ISA chip on the board that users don't know about so don't expect |
| # users to choose the right thing ... |
| # |
| config ISA |
| bool |
| |
| config EISA |
| bool "EISA support" |
| depends on HW_HAS_EISA |
| select ISA |
| select GENERIC_ISA_DMA |
| ---help--- |
| The Extended Industry Standard Architecture (EISA) bus was |
| developed as an open alternative to the IBM MicroChannel bus. |
| |
| The EISA bus provided some of the features of the IBM MicroChannel |
| bus while maintaining backward compatibility with cards made for |
| the older ISA bus. The EISA bus saw limited use between 1988 and |
| 1995 when it was made obsolete by the PCI bus. |
| |
| Say Y here if you are building a kernel for an EISA-based machine. |
| |
| Otherwise, say N. |
| |
| source "drivers/eisa/Kconfig" |
| |
| config TC |
| bool "TURBOchannel support" |
| depends on MACH_DECSTATION |
| help |
| TURBOchannel is a DEC (now Compaq (now HP)) bus for Alpha and MIPS |
| processors. TURBOchannel programming specifications are available |
| at: |
| <ftp://ftp.hp.com/pub/alphaserver/archive/triadd/> |
| and: |
| <http://www.computer-refuge.org/classiccmp/ftp.digital.com/pub/DEC/TriAdd/> |
| Linux driver support status is documented at: |
| <http://www.linux-mips.org/wiki/DECstation> |
| |
| config MMU |
| bool |
| default y |
| |
| config I8253 |
| bool |
| select CLKSRC_I8253 |
| select CLKEVT_I8253 |
| select MIPS_EXTERNAL_TIMER |
| |
| config ZONE_DMA32 |
| bool |
| |
| source "drivers/pcmcia/Kconfig" |
| |
| source "drivers/pci/hotplug/Kconfig" |
| |
| config RAPIDIO |
| bool "RapidIO support" |
| depends on PCI |
| default n |
| help |
| If you say Y here, the kernel will include drivers and |
| infrastructure code to support RapidIO interconnect devices. |
| |
| source "drivers/rapidio/Kconfig" |
| |
| endmenu |
| |
| menu "Executable file formats" |
| |
| source "fs/Kconfig.binfmt" |
| |
| config TRAD_SIGNALS |
| bool |
| |
| config MIPS32_COMPAT |
| bool "Kernel support for Linux/MIPS 32-bit binary compatibility" |
| depends on 64BIT |
| help |
| Select this option if you want Linux/MIPS 32-bit binary |
| compatibility. Since all software available for Linux/MIPS is |
| currently 32-bit you should say Y here. |
| |
| config COMPAT |
| bool |
| depends on MIPS32_COMPAT |
| select ARCH_WANT_OLD_COMPAT_IPC |
| default y |
| |
| config SYSVIPC_COMPAT |
| bool |
| depends on COMPAT && SYSVIPC |
| default y |
| |
| config MIPS32_O32 |
| bool "Kernel support for o32 binaries" |
| depends on MIPS32_COMPAT |
| help |
| Select this option if you want to run o32 binaries. These are pure |
| 32-bit binaries as used by the 32-bit Linux/MIPS port. Most of |
| existing binaries are in this format. |
| |
| If unsure, say Y. |
| |
| config MIPS32_N32 |
| bool "Kernel support for n32 binaries" |
| depends on MIPS32_COMPAT |
| help |
| Select this option if you want to run n32 binaries. These are |
| 64-bit binaries using 32-bit quantities for addressing and certain |
| data that would normally be 64-bit. They are used in special |
| cases. |
| |
| If unsure, say N. |
| |
| config BINFMT_ELF32 |
| bool |
| default y if MIPS32_O32 || MIPS32_N32 |
| |
| endmenu |
| |
| menu "Power management options" |
| |
| config ARCH_HIBERNATION_POSSIBLE |
| def_bool y |
| depends on SYS_SUPPORTS_HOTPLUG_CPU || !SMP |
| |
| config ARCH_SUSPEND_POSSIBLE |
| def_bool y |
| depends on SYS_SUPPORTS_HOTPLUG_CPU || !SMP |
| |
| source "kernel/power/Kconfig" |
| |
| endmenu |
| |
| source "arch/mips/kernel/cpufreq/Kconfig" |
| |
| source "net/Kconfig" |
| |
| source "drivers/Kconfig" |
| |
| source "fs/Kconfig" |
| |
| source "arch/mips/Kconfig.debug" |
| |
| source "security/Kconfig" |
| |
| source "crypto/Kconfig" |
| |
| source "lib/Kconfig" |