Merge branch 'akpm' (Andrew's patchbomb)
Merge misc updates from Andrew Morton:
"About half of most of MM. Going very early this time due to
uncertainty over the coreautounifiednumasched things. I'll send the
other half of most of MM tomorrow. The rest of MM awaits a slab merge
from Pekka."
* emailed patches from Andrew Morton: (71 commits)
memory_hotplug: ensure every online node has NORMAL memory
memory_hotplug: handle empty zone when online_movable/online_kernel
mm, memory-hotplug: dynamic configure movable memory and portion memory
drivers/base/node.c: cleanup node_state_attr[]
bootmem: fix wrong call parameter for free_bootmem()
avr32, kconfig: remove HAVE_ARCH_BOOTMEM
mm: cma: remove watermark hacks
mm: cma: skip watermarks check for already isolated blocks in split_free_page()
mm, oom: fix race when specifying a thread as the oom origin
mm, oom: change type of oom_score_adj to short
mm: cleanup register_node()
mm, mempolicy: remove duplicate code
mm/vmscan.c: try_to_freeze() returns boolean
mm: introduce putback_movable_pages()
virtio_balloon: introduce migration primitives to balloon pages
mm: introduce compaction and migration for ballooned pages
mm: introduce a common interface for balloon pages mobility
mm: redefine address_space.assoc_mapping
mm: adjust address_space_operations.migratepage() return code
arch/sparc/kernel/sys_sparc_64.c: s/COLOUR/COLOR/
...
diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio
index 2f06d40..2e33dc6 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio
+++ b/Documentation/ABI/testing/sysfs-bus-iio
@@ -189,6 +189,14 @@
A computed peak value based on the sum squared magnitude of
the underlying value in the specified directions.
+What: /sys/bus/iio/devices/iio:deviceX/in_pressureY_raw
+What: /sys/bus/iio/devices/iio:deviceX/in_pressure_raw
+KernelVersion: 3.8
+Contact: linux-iio@vger.kernel.org
+Description:
+ Raw pressure measurement from channel Y. Units after
+ application of scale and offset are kilopascal.
+
What: /sys/bus/iio/devices/iio:deviceX/in_accel_offset
What: /sys/bus/iio/devices/iio:deviceX/in_accel_x_offset
What: /sys/bus/iio/devices/iio:deviceX/in_accel_y_offset
@@ -197,6 +205,8 @@
What: /sys/bus/iio/devices/iio:deviceX/in_voltage_offset
What: /sys/bus/iio/devices/iio:deviceX/in_tempY_offset
What: /sys/bus/iio/devices/iio:deviceX/in_temp_offset
+What: /sys/bus/iio/devices/iio:deviceX/in_pressureY_offset
+What: /sys/bus/iio/devices/iio:deviceX/in_pressure_offset
KernelVersion: 2.6.35
Contact: linux-iio@vger.kernel.org
Description:
@@ -226,6 +236,8 @@
What: /sys/bus/iio/devices/iio:deviceX/in_magn_x_scale
What: /sys/bus/iio/devices/iio:deviceX/in_magn_y_scale
What: /sys/bus/iio/devices/iio:deviceX/in_magn_z_scale
+What: /sys/bus/iio/devices/iio:deviceX/in_pressureY_scale
+What: /sys/bus/iio/devices/iio:deviceX/in_pressure_scale
KernelVersion: 2.6.35
Contact: linux-iio@vger.kernel.org
Description:
@@ -245,6 +257,8 @@
What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_z_calibbias
What: /sys/bus/iio/devices/iio:deviceX/in_illuminance0_calibbias
What: /sys/bus/iio/devices/iio:deviceX/in_proximity0_calibbias
+What: /sys/bus/iio/devices/iio:deviceX/in_pressureY_calibbias
+What: /sys/bus/iio/devices/iio:deviceX/in_pressure_calibbias
KernelVersion: 2.6.35
Contact: linux-iio@vger.kernel.org
Description:
@@ -262,6 +276,8 @@
What /sys/bus/iio/devices/iio:deviceX/in_anglvel_z_calibscale
what /sys/bus/iio/devices/iio:deviceX/in_illuminance0_calibscale
what /sys/bus/iio/devices/iio:deviceX/in_proximity0_calibscale
+What: /sys/bus/iio/devices/iio:deviceX/in_pressureY_calibscale
+What: /sys/bus/iio/devices/iio:deviceX/in_pressure_calibscale
KernelVersion: 2.6.35
Contact: linux-iio@vger.kernel.org
Description:
@@ -275,6 +291,8 @@
What: /sys/.../iio:deviceX/out_voltageX_scale_available
What: /sys/.../iio:deviceX/out_altvoltageX_scale_available
What: /sys/.../iio:deviceX/in_capacitance_scale_available
+What: /sys/.../iio:deviceX/in_pressure_scale_available
+What: /sys/.../iio:deviceX/in_pressureY_scale_available
KernelVersion: 2.6.35
Contact: linux-iio@vger.kernel.org
Description:
@@ -694,6 +712,8 @@
What: /sys/.../buffer/scan_elements/in_voltageY-voltageZ_en
What: /sys/.../buffer/scan_elements/in_incli_x_en
What: /sys/.../buffer/scan_elements/in_incli_y_en
+What: /sys/.../buffer/scan_elements/in_pressureY_en
+What: /sys/.../buffer/scan_elements/in_pressure_en
KernelVersion: 2.6.37
Contact: linux-iio@vger.kernel.org
Description:
@@ -707,6 +727,8 @@
What: /sys/.../buffer/scan_elements/in_voltage_type
What: /sys/.../buffer/scan_elements/in_voltageY_supply_type
What: /sys/.../buffer/scan_elements/in_timestamp_type
+What: /sys/.../buffer/scan_elements/in_pressureY_type
+What: /sys/.../buffer/scan_elements/in_pressure_type
KernelVersion: 2.6.37
Contact: linux-iio@vger.kernel.org
Description:
@@ -751,6 +773,8 @@
What: /sys/.../buffer/scan_elements/in_incli_x_index
What: /sys/.../buffer/scan_elements/in_incli_y_index
What: /sys/.../buffer/scan_elements/in_timestamp_index
+What: /sys/.../buffer/scan_elements/in_pressureY_index
+What: /sys/.../buffer/scan_elements/in_pressure_index
KernelVersion: 2.6.37
Contact: linux-iio@vger.kernel.org
Description:
diff --git a/Documentation/ABI/testing/sysfs-class-devfreq b/Documentation/ABI/testing/sysfs-class-devfreq
index 23d78b5..0ba6ea2 100644
--- a/Documentation/ABI/testing/sysfs-class-devfreq
+++ b/Documentation/ABI/testing/sysfs-class-devfreq
@@ -11,7 +11,7 @@
Date: September 2011
Contact: MyungJoo Ham <myungjoo.ham@samsung.com>
Description:
- The /sys/class/devfreq/.../governor shows the name of the
+ The /sys/class/devfreq/.../governor show or set the name of the
governor used by the corresponding devfreq object.
What: /sys/class/devfreq/.../cur_freq
@@ -19,15 +19,16 @@
Contact: MyungJoo Ham <myungjoo.ham@samsung.com>
Description:
The /sys/class/devfreq/.../cur_freq shows the current
- frequency of the corresponding devfreq object.
+ frequency of the corresponding devfreq object. Same as
+ target_freq when get_cur_freq() is not implemented by
+ devfreq driver.
-What: /sys/class/devfreq/.../central_polling
-Date: September 2011
-Contact: MyungJoo Ham <myungjoo.ham@samsung.com>
+What: /sys/class/devfreq/.../target_freq
+Date: September 2012
+Contact: Rajagopal Venkat <rajagopal.venkat@linaro.org>
Description:
- The /sys/class/devfreq/.../central_polling shows whether
- the devfreq ojbect is using devfreq-provided central
- polling mechanism or not.
+ The /sys/class/devfreq/.../target_freq shows the next governor
+ predicted target frequency of the corresponding devfreq object.
What: /sys/class/devfreq/.../polling_interval
Date: September 2011
@@ -43,6 +44,17 @@
(/sys/class/devfreq/.../central_polling is 0), this value
may be useless.
+What: /sys/class/devfreq/.../trans_stat
+Date: October 2012
+Contact: MyungJoo Ham <myungjoo.ham@samsung.com>
+Descrtiption:
+ This ABI shows the statistics of devfreq behavior on a
+ specific device. It shows the time spent in each state and
+ the number of transitions between states.
+ In order to activate this ABI, the devfreq target device
+ driver should provide the list of available frequencies
+ with its profile.
+
What: /sys/class/devfreq/.../userspace/set_freq
Date: September 2011
Contact: MyungJoo Ham <myungjoo.ham@samsung.com>
@@ -50,3 +62,19 @@
The /sys/class/devfreq/.../userspace/set_freq shows and
sets the requested frequency for the devfreq object if
userspace governor is in effect.
+
+What: /sys/class/devfreq/.../available_frequencies
+Date: October 2012
+Contact: Nishanth Menon <nm@ti.com>
+Description:
+ The /sys/class/devfreq/.../available_frequencies shows
+ the available frequencies of the corresponding devfreq object.
+ This is a snapshot of available frequencies and not limited
+ by the min/max frequency restrictions.
+
+What: /sys/class/devfreq/.../available_governors
+Date: October 2012
+Contact: Nishanth Menon <nm@ti.com>
+Description:
+ The /sys/class/devfreq/.../available_governors shows
+ currently available governors in the system.
diff --git a/Documentation/ABI/testing/sysfs-devices-power b/Documentation/ABI/testing/sysfs-devices-power
index 45000f0..7fc2997 100644
--- a/Documentation/ABI/testing/sysfs-devices-power
+++ b/Documentation/ABI/testing/sysfs-devices-power
@@ -204,3 +204,34 @@
This attribute has no effect on system-wide suspend/resume and
hibernation.
+
+What: /sys/devices/.../power/pm_qos_no_power_off
+Date: September 2012
+Contact: Rafael J. Wysocki <rjw@sisk.pl>
+Description:
+ The /sys/devices/.../power/pm_qos_no_power_off attribute
+ is used for manipulating the PM QoS "no power off" flag. If
+ set, this flag indicates to the kernel that power should not
+ be removed entirely from the device.
+
+ Not all drivers support this attribute. If it isn't supported,
+ it is not present.
+
+ This attribute has no effect on system-wide suspend/resume and
+ hibernation.
+
+What: /sys/devices/.../power/pm_qos_remote_wakeup
+Date: September 2012
+Contact: Rafael J. Wysocki <rjw@sisk.pl>
+Description:
+ The /sys/devices/.../power/pm_qos_remote_wakeup attribute
+ is used for manipulating the PM QoS "remote wakeup required"
+ flag. If set, this flag indicates to the kernel that the
+ device is a source of user events that have to be signaled from
+ its low-power states.
+
+ Not all drivers support this attribute. If it isn't supported,
+ it is not present.
+
+ This attribute has no effect on system-wide suspend/resume and
+ hibernation.
diff --git a/Documentation/ABI/testing/sysfs-devices-sun b/Documentation/ABI/testing/sysfs-devices-sun
new file mode 100644
index 0000000..86be984
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-devices-sun
@@ -0,0 +1,14 @@
+Whatt: /sys/devices/.../sun
+Date: October 2012
+Contact: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
+Description:
+ The file contains a Slot-unique ID which provided by the _SUN
+ method in the ACPI namespace. The value is written in Advanced
+ Configuration and Power Interface Specification as follows:
+
+ "The _SUN value is required to be unique among the slots of
+ the same type. It is also recommended that this number match
+ the slot number printed on the physical slot whenever possible."
+
+ So reading the sysfs file, we can identify a physical position
+ of the slot in the system.
diff --git a/Documentation/ABI/testing/sysfs-tty b/Documentation/ABI/testing/sysfs-tty
index 0c43015..ad22fb0 100644
--- a/Documentation/ABI/testing/sysfs-tty
+++ b/Documentation/ABI/testing/sysfs-tty
@@ -26,3 +26,115 @@
UART port in serial_core, that is bound to TTY like ttyS0.
uartclk = 16 * baud_base
+ These sysfs values expose the TIOCGSERIAL interface via
+ sysfs rather than via ioctls.
+
+What: /sys/class/tty/ttyS0/type
+Date: October 2012
+Contact: Alan Cox <alan@linux.intel.com>
+Description:
+ Shows the current tty type for this port.
+
+ These sysfs values expose the TIOCGSERIAL interface via
+ sysfs rather than via ioctls.
+
+What: /sys/class/tty/ttyS0/line
+Date: October 2012
+Contact: Alan Cox <alan@linux.intel.com>
+Description:
+ Shows the current tty line number for this port.
+
+ These sysfs values expose the TIOCGSERIAL interface via
+ sysfs rather than via ioctls.
+
+What: /sys/class/tty/ttyS0/port
+Date: October 2012
+Contact: Alan Cox <alan@linux.intel.com>
+Description:
+ Shows the current tty port I/O address for this port.
+
+ These sysfs values expose the TIOCGSERIAL interface via
+ sysfs rather than via ioctls.
+
+What: /sys/class/tty/ttyS0/irq
+Date: October 2012
+Contact: Alan Cox <alan@linux.intel.com>
+Description:
+ Shows the current primary interrupt for this port.
+
+ These sysfs values expose the TIOCGSERIAL interface via
+ sysfs rather than via ioctls.
+
+What: /sys/class/tty/ttyS0/flags
+Date: October 2012
+Contact: Alan Cox <alan@linux.intel.com>
+Description:
+ Show the tty port status flags for this port.
+
+ These sysfs values expose the TIOCGSERIAL interface via
+ sysfs rather than via ioctls.
+
+What: /sys/class/tty/ttyS0/xmit_fifo_size
+Date: October 2012
+Contact: Alan Cox <alan@linux.intel.com>
+Description:
+ Show the transmit FIFO size for this port.
+
+ These sysfs values expose the TIOCGSERIAL interface via
+ sysfs rather than via ioctls.
+
+What: /sys/class/tty/ttyS0/close_delay
+Date: October 2012
+Contact: Alan Cox <alan@linux.intel.com>
+Description:
+ Show the closing delay time for this port in ms.
+
+ These sysfs values expose the TIOCGSERIAL interface via
+ sysfs rather than via ioctls.
+
+What: /sys/class/tty/ttyS0/closing_wait
+Date: October 2012
+Contact: Alan Cox <alan@linux.intel.com>
+Description:
+ Show the close wait time for this port in ms.
+
+ These sysfs values expose the TIOCGSERIAL interface via
+ sysfs rather than via ioctls.
+
+What: /sys/class/tty/ttyS0/custom_divisor
+Date: October 2012
+Contact: Alan Cox <alan@linux.intel.com>
+Description:
+ Show the custom divisor if any that is set on this port.
+
+ These sysfs values expose the TIOCGSERIAL interface via
+ sysfs rather than via ioctls.
+
+What: /sys/class/tty/ttyS0/io_type
+Date: October 2012
+Contact: Alan Cox <alan@linux.intel.com>
+Description:
+ Show the I/O type that is to be used with the iomem base
+ address.
+
+ These sysfs values expose the TIOCGSERIAL interface via
+ sysfs rather than via ioctls.
+
+What: /sys/class/tty/ttyS0/iomem_base
+Date: October 2012
+Contact: Alan Cox <alan@linux.intel.com>
+Description:
+ The I/O memory base for this port.
+
+ These sysfs values expose the TIOCGSERIAL interface via
+ sysfs rather than via ioctls.
+
+What: /sys/class/tty/ttyS0/iomem_reg_shift
+Date: October 2012
+Contact: Alan Cox <alan@linux.intel.com>
+Description:
+ Show the register shift indicating the spacing to be used
+ for accesses on this iomem address.
+
+ These sysfs values expose the TIOCGSERIAL interface via
+ sysfs rather than via ioctls.
diff --git a/Documentation/DocBook/gadget.tmpl b/Documentation/DocBook/gadget.tmpl
index 6ef2f00..4017f14 100644
--- a/Documentation/DocBook/gadget.tmpl
+++ b/Documentation/DocBook/gadget.tmpl
@@ -671,7 +671,7 @@
<para>There's a USB Mass Storage class driver, which provides
a different solution for interoperability with systems such
as MS-Windows and MacOS.
-That <emphasis>File-backed Storage</emphasis> driver uses a
+That <emphasis>Mass Storage</emphasis> driver uses a
file or block device as backing store for a drive,
like the <filename>loop</filename> driver.
The USB host uses the BBB, CB, or CBI versions of the mass
diff --git a/Documentation/DocBook/uio-howto.tmpl b/Documentation/DocBook/uio-howto.tmpl
index ac3d001..ddb05e9 100644
--- a/Documentation/DocBook/uio-howto.tmpl
+++ b/Documentation/DocBook/uio-howto.tmpl
@@ -719,6 +719,62 @@
</para>
</sect1>
+<sect1 id="using uio_dmem_genirq">
+<title>Using uio_dmem_genirq for platform devices</title>
+ <para>
+ In addition to statically allocated memory ranges, they may also be
+ a desire to use dynamically allocated regions in a user space driver.
+ In particular, being able to access memory made available through the
+ dma-mapping API, may be particularly useful. The
+ <varname>uio_dmem_genirq</varname> driver provides a way to accomplish
+ this.
+ </para>
+ <para>
+ This driver is used in a similar manner to the
+ <varname>"uio_pdrv_genirq"</varname> driver with respect to interrupt
+ configuration and handling.
+ </para>
+ <para>
+ Set the <varname>.name</varname> element of
+ <varname>struct platform_device</varname> to
+ <varname>"uio_dmem_genirq"</varname> to use this driver.
+ </para>
+ <para>
+ When using this driver, fill in the <varname>.platform_data</varname>
+ element of <varname>struct platform_device</varname>, which is of type
+ <varname>struct uio_dmem_genirq_pdata</varname> and which contains the
+ following elements:
+ </para>
+ <itemizedlist>
+ <listitem><varname>struct uio_info uioinfo</varname>: The same
+ structure used as the <varname>uio_pdrv_genirq</varname> platform
+ data</listitem>
+ <listitem><varname>unsigned int *dynamic_region_sizes</varname>:
+ Pointer to list of sizes of dynamic memory regions to be mapped into
+ user space.
+ </listitem>
+ <listitem><varname>unsigned int num_dynamic_regions</varname>:
+ Number of elements in <varname>dynamic_region_sizes</varname> array.
+ </listitem>
+ </itemizedlist>
+ <para>
+ The dynamic regions defined in the platform data will be appended to
+ the <varname> mem[] </varname> array after the platform device
+ resources, which implies that the total number of static and dynamic
+ memory regions cannot exceed <varname>MAX_UIO_MAPS</varname>.
+ </para>
+ <para>
+ The dynamic memory regions will be allocated when the UIO device file,
+ <varname>/dev/uioX</varname> is opened.
+ Simiar to static memory resources, the memory region information for
+ dynamic regions is then visible via sysfs at
+ <varname>/sys/class/uio/uioX/maps/mapY/*</varname>.
+ The dynmaic memory regions will be freed when the UIO device file is
+ closed. When no processes are holding the device file open, the address
+ returned to userspace is ~0.
+ </para>
+</sect1>
+
</chapter>
<chapter id="userspace_driver" xreflabel="Writing a driver in user space">
diff --git a/Documentation/acpi/enumeration.txt b/Documentation/acpi/enumeration.txt
new file mode 100644
index 0000000..4f27785
--- /dev/null
+++ b/Documentation/acpi/enumeration.txt
@@ -0,0 +1,227 @@
+ACPI based device enumeration
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ACPI 5 introduced a set of new resources (UartTSerialBus, I2cSerialBus,
+SpiSerialBus, GpioIo and GpioInt) which can be used in enumerating slave
+devices behind serial bus controllers.
+
+In addition we are starting to see peripherals integrated in the
+SoC/Chipset to appear only in ACPI namespace. These are typically devices
+that are accessed through memory-mapped registers.
+
+In order to support this and re-use the existing drivers as much as
+possible we decided to do following:
+
+ o Devices that have no bus connector resource are represented as
+ platform devices.
+
+ o Devices behind real busses where there is a connector resource
+ are represented as struct spi_device or struct i2c_device
+ (standard UARTs are not busses so there is no struct uart_device).
+
+As both ACPI and Device Tree represent a tree of devices (and their
+resources) this implementation follows the Device Tree way as much as
+possible.
+
+The ACPI implementation enumerates devices behind busses (platform, SPI and
+I2C), creates the physical devices and binds them to their ACPI handle in
+the ACPI namespace.
+
+This means that when ACPI_HANDLE(dev) returns non-NULL the device was
+enumerated from ACPI namespace. This handle can be used to extract other
+device-specific configuration. There is an example of this below.
+
+Platform bus support
+~~~~~~~~~~~~~~~~~~~~
+Since we are using platform devices to represent devices that are not
+connected to any physical bus we only need to implement a platform driver
+for the device and add supported ACPI IDs. If this same IP-block is used on
+some other non-ACPI platform, the driver might work out of the box or needs
+some minor changes.
+
+Adding ACPI support for an existing driver should be pretty
+straightforward. Here is the simplest example:
+
+ #ifdef CONFIG_ACPI
+ static struct acpi_device_id mydrv_acpi_match[] = {
+ /* ACPI IDs here */
+ { }
+ };
+ MODULE_DEVICE_TABLE(acpi, mydrv_acpi_match);
+ #endif
+
+ static struct platform_driver my_driver = {
+ ...
+ .driver = {
+ .acpi_match_table = ACPI_PTR(mydrv_acpi_match),
+ },
+ };
+
+If the driver needs to perform more complex initialization like getting and
+configuring GPIOs it can get its ACPI handle and extract this information
+from ACPI tables.
+
+Currently the kernel is not able to automatically determine from which ACPI
+device it should make the corresponding platform device so we need to add
+the ACPI device explicitly to acpi_platform_device_ids list defined in
+drivers/acpi/scan.c. This limitation is only for the platform devices, SPI
+and I2C devices are created automatically as described below.
+
+SPI serial bus support
+~~~~~~~~~~~~~~~~~~~~~~
+Slave devices behind SPI bus have SpiSerialBus resource attached to them.
+This is extracted automatically by the SPI core and the slave devices are
+enumerated once spi_register_master() is called by the bus driver.
+
+Here is what the ACPI namespace for a SPI slave might look like:
+
+ Device (EEP0)
+ {
+ Name (_ADR, 1)
+ Name (_CID, Package() {
+ "ATML0025",
+ "AT25",
+ })
+ ...
+ Method (_CRS, 0, NotSerialized)
+ {
+ SPISerialBus(1, PolarityLow, FourWireMode, 8,
+ ControllerInitiated, 1000000, ClockPolarityLow,
+ ClockPhaseFirst, "\\_SB.PCI0.SPI1",)
+ }
+ ...
+
+The SPI device drivers only need to add ACPI IDs in a similar way than with
+the platform device drivers. Below is an example where we add ACPI support
+to at25 SPI eeprom driver (this is meant for the above ACPI snippet):
+
+ #ifdef CONFIG_ACPI
+ static struct acpi_device_id at25_acpi_match[] = {
+ { "AT25", 0 },
+ { },
+ };
+ MODULE_DEVICE_TABLE(acpi, at25_acpi_match);
+ #endif
+
+ static struct spi_driver at25_driver = {
+ .driver = {
+ ...
+ .acpi_match_table = ACPI_PTR(at25_acpi_match),
+ },
+ };
+
+Note that this driver actually needs more information like page size of the
+eeprom etc. but at the time writing this there is no standard way of
+passing those. One idea is to return this in _DSM method like:
+
+ Device (EEP0)
+ {
+ ...
+ Method (_DSM, 4, NotSerialized)
+ {
+ Store (Package (6)
+ {
+ "byte-len", 1024,
+ "addr-mode", 2,
+ "page-size, 32
+ }, Local0)
+
+ // Check UUIDs etc.
+
+ Return (Local0)
+ }
+
+Then the at25 SPI driver can get this configation by calling _DSM on its
+ACPI handle like:
+
+ struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL };
+ struct acpi_object_list input;
+ acpi_status status;
+
+ /* Fill in the input buffer */
+
+ status = acpi_evaluate_object(ACPI_HANDLE(&spi->dev), "_DSM",
+ &input, &output);
+ if (ACPI_FAILURE(status))
+ /* Handle the error */
+
+ /* Extract the data here */
+
+ kfree(output.pointer);
+
+I2C serial bus support
+~~~~~~~~~~~~~~~~~~~~~~
+The slaves behind I2C bus controller only need to add the ACPI IDs like
+with the platform and SPI drivers. However the I2C bus controller driver
+needs to call acpi_i2c_register_devices() after it has added the adapter.
+
+An I2C bus (controller) driver does:
+
+ ...
+ ret = i2c_add_numbered_adapter(adapter);
+ if (ret)
+ /* handle error */
+
+ of_i2c_register_devices(adapter);
+ /* Enumerate the slave devices behind this bus via ACPI */
+ acpi_i2c_register_devices(adapter);
+
+Below is an example of how to add ACPI support to the existing mpu3050
+input driver:
+
+ #ifdef CONFIG_ACPI
+ static struct acpi_device_id mpu3050_acpi_match[] = {
+ { "MPU3050", 0 },
+ { },
+ };
+ MODULE_DEVICE_TABLE(acpi, mpu3050_acpi_match);
+ #endif
+
+ static struct i2c_driver mpu3050_i2c_driver = {
+ .driver = {
+ .name = "mpu3050",
+ .owner = THIS_MODULE,
+ .pm = &mpu3050_pm,
+ .of_match_table = mpu3050_of_match,
+ .acpi_match_table ACPI_PTR(mpu3050_acpi_match),
+ },
+ .probe = mpu3050_probe,
+ .remove = __devexit_p(mpu3050_remove),
+ .id_table = mpu3050_ids,
+ };
+
+GPIO support
+~~~~~~~~~~~~
+ACPI 5 introduced two new resources to describe GPIO connections: GpioIo
+and GpioInt. These resources are used be used to pass GPIO numbers used by
+the device to the driver. For example:
+
+ Method (_CRS, 0, NotSerialized)
+ {
+ Name (SBUF, ResourceTemplate()
+ {
+ GpioIo (Exclusive, PullDefault, 0x0000, 0x0000,
+ IoRestrictionOutputOnly, "\\_SB.PCI0.GPI0",
+ 0x00, ResourceConsumer,,)
+ {
+ // Pin List
+ 0x0055
+ }
+ ...
+
+ Return (SBUF)
+ }
+ }
+
+These GPIO numbers are controller relative and path "\\_SB.PCI0.GPI0"
+specifies the path to the controller. In order to use these GPIOs in Linux
+we need to translate them to the Linux GPIO numbers.
+
+The driver can do this by including <linux/acpi_gpio.h> and then calling
+acpi_get_gpio(path, gpio). This will return the Linux GPIO number or
+negative errno if there was no translation found.
+
+Other GpioIo parameters must be converted first by the driver to be
+suitable to the gpiolib before passing them.
+
+In case of GpioInt resource an additional call to gpio_to_irq() must be
+done before calling request_irq().
diff --git a/Documentation/devices.txt b/Documentation/devices.txt
index b6251cc..08f01e7 100644
--- a/Documentation/devices.txt
+++ b/Documentation/devices.txt
@@ -2561,9 +2561,6 @@
192 = /dev/usb/yurex1 First USB Yurex device
...
209 = /dev/usb/yurex16 16th USB Yurex device
- 240 = /dev/usb/dabusb0 First daubusb device
- ...
- 243 = /dev/usb/dabusb3 Fourth dabusb device
180 block USB block devices
0 = /dev/uba First USB block device
diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-spear.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-spear.txt
new file mode 100644
index 0000000..f3d44984
--- /dev/null
+++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-spear.txt
@@ -0,0 +1,42 @@
+SPEAr cpufreq driver
+-------------------
+
+SPEAr SoC cpufreq driver for CPU frequency scaling.
+It supports both uniprocessor (UP) and symmetric multiprocessor (SMP) systems
+which share clock across all CPUs.
+
+Required properties:
+- cpufreq_tbl: Table of frequencies CPU could be transitioned into, in the
+ increasing order.
+
+Optional properties:
+- clock-latency: Specify the possible maximum transition latency for clock, in
+ unit of nanoseconds.
+
+Both required and optional properties listed above must be defined under node
+/cpus/cpu@0.
+
+Examples:
+--------
+cpus {
+
+ <...>
+
+ cpu@0 {
+ compatible = "arm,cortex-a9";
+ reg = <0>;
+
+ <...>
+
+ cpufreq_tbl = < 166000
+ 200000
+ 250000
+ 300000
+ 400000
+ 500000
+ 600000 >;
+ };
+
+ <...>
+
+};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-stmpe.txt b/Documentation/devicetree/bindings/gpio/gpio-stmpe.txt
new file mode 100644
index 0000000..a0e4cf8
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-stmpe.txt
@@ -0,0 +1,18 @@
+STMPE gpio
+----------
+
+Required properties:
+ - compatible: "st,stmpe-gpio"
+
+Optional properties:
+ - st,norequest-mask: bitmask specifying which GPIOs should _not_ be requestable
+ due to different usage (e.g. touch, keypad)
+
+Node name must be stmpe_gpio and should be child node of stmpe node to which it
+belongs.
+
+Example:
+ stmpe_gpio {
+ compatible = "st,stmpe-gpio";
+ st,norequest-mask = <0x20>; //gpio 5 can't be used
+ };
diff --git a/Documentation/devicetree/bindings/gpio/spear_spics.txt b/Documentation/devicetree/bindings/gpio/spear_spics.txt
new file mode 100644
index 0000000..96c37eb
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/spear_spics.txt
@@ -0,0 +1,50 @@
+=== ST Microelectronics SPEAr SPI CS Driver ===
+
+SPEAr platform provides a provision to control chipselects of ARM PL022 Prime
+Cell spi controller through its system registers, which otherwise remains under
+PL022 control. If chipselect remain under PL022 control then they would be
+released as soon as transfer is over and TxFIFO becomes empty. This is not
+desired by some of the device protocols above spi which expect (multiple)
+transfers without releasing their chipselects.
+
+Chipselects can be controlled by software by turning them as GPIOs. SPEAr
+provides another interface through system registers through which software can
+directly control each PL022 chipselect. Hence, it is natural for SPEAr to export
+the control of this interface as gpio.
+
+Required properties:
+
+ * compatible: should be defined as "st,spear-spics-gpio"
+ * reg: mentioning address range of spics controller
+ * st-spics,peripcfg-reg: peripheral configuration register offset
+ * st-spics,sw-enable-bit: bit offset to enable sw control
+ * st-spics,cs-value-bit: bit offset to drive chipselect low or high
+ * st-spics,cs-enable-mask: chip select number bit mask
+ * st-spics,cs-enable-shift: chip select number program offset
+ * gpio-controller: Marks the device node as gpio controller
+ * #gpio-cells: should be 1 and will mention chip select number
+
+All the above bit offsets are within peripcfg register.
+
+Example:
+-------
+spics: spics@e0700000{
+ compatible = "st,spear-spics-gpio";
+ reg = <0xe0700000 0x1000>;
+ st-spics,peripcfg-reg = <0x3b0>;
+ st-spics,sw-enable-bit = <12>;
+ st-spics,cs-value-bit = <11>;
+ st-spics,cs-enable-mask = <3>;
+ st-spics,cs-enable-shift = <8>;
+ gpio-controller;
+ #gpio-cells = <2>;
+};
+
+
+spi0: spi@e0100000 {
+ status = "okay";
+ num-cs = <3>;
+ cs-gpios = <&gpio1 7 0>, <&spics 0>,
+ <&spics 1>;
+ ...
+}
diff --git a/Documentation/devicetree/bindings/tty/serial/fsl-mxs-auart.txt b/Documentation/devicetree/bindings/tty/serial/fsl-mxs-auart.txt
index 2ee903f..273a8d5 100644
--- a/Documentation/devicetree/bindings/tty/serial/fsl-mxs-auart.txt
+++ b/Documentation/devicetree/bindings/tty/serial/fsl-mxs-auart.txt
@@ -6,11 +6,19 @@
- reg : Address and length of the register set for the device
- interrupts : Should contain the auart interrupt numbers
+Optional properties:
+- fsl,auart-dma-channel : The DMA channels, the first is for RX, the other
+ is for TX. If you add this property, it also means that you
+ will enable the DMA support for the auart.
+ Note: due to the hardware bug in imx23(see errata : 2836),
+ only the imx28 can enable the DMA support for the auart.
+
Example:
auart0: serial@8006a000 {
compatible = "fsl,imx28-auart", "fsl,imx23-auart";
reg = <0x8006a000 0x2000>;
interrupts = <112 70 71>;
+ fsl,auart-dma-channel = <8 9>;
};
Note: Each auart port should have an alias correctly numbered in "aliases"
diff --git a/Documentation/devicetree/bindings/tty/serial/of-serial.txt b/Documentation/devicetree/bindings/tty/serial/of-serial.txt
index ba385f2..1e1145ca 100644
--- a/Documentation/devicetree/bindings/tty/serial/of-serial.txt
+++ b/Documentation/devicetree/bindings/tty/serial/of-serial.txt
@@ -14,7 +14,10 @@
- "serial" if the port type is unknown.
- reg : offset and length of the register set for the device.
- interrupts : should contain uart interrupt.
-- clock-frequency : the input clock frequency for the UART.
+- clock-frequency : the input clock frequency for the UART
+ or
+ clocks phandle to refer to the clk used as per Documentation/devicetree
+ /bindings/clock/clock-bindings.txt
Optional properties:
- current-speed : the current active speed of the UART.
diff --git a/Documentation/devicetree/bindings/usb/am33xx-usb.txt b/Documentation/devicetree/bindings/usb/am33xx-usb.txt
index ca8fa56..a922505 100644
--- a/Documentation/devicetree/bindings/usb/am33xx-usb.txt
+++ b/Documentation/devicetree/bindings/usb/am33xx-usb.txt
@@ -3,12 +3,12 @@
- ti,hwmods : must be "usb_otg_hs"
- multipoint : Should be "1" indicating the musb controller supports
multipoint. This is a MUSB configuration-specific setting.
- - num_eps : Specifies the number of endpoints. This is also a
+ - num-eps : Specifies the number of endpoints. This is also a
MUSB configuration-specific setting. Should be set to "16"
- - ram_bits : Specifies the ram address size. Should be set to "12"
- - port0_mode : Should be "3" to represent OTG. "1" signifies HOST and "2"
+ - ram-bits : Specifies the ram address size. Should be set to "12"
+ - port0-mode : Should be "3" to represent OTG. "1" signifies HOST and "2"
represents PERIPHERAL.
- - port1_mode : Should be "1" to represent HOST. "3" signifies OTG and "2"
+ - port1-mode : Should be "1" to represent HOST. "3" signifies OTG and "2"
represents PERIPHERAL.
- power : Should be "250". This signifies the controller can supply upto
500mA when operating in host mode.
diff --git a/Documentation/firmware_class/README b/Documentation/firmware_class/README
index 815b711..43fada9 100644
--- a/Documentation/firmware_class/README
+++ b/Documentation/firmware_class/README
@@ -22,12 +22,17 @@
- calls request_firmware(&fw_entry, $FIRMWARE, device)
- kernel searchs the fimware image with name $FIRMWARE directly
in the below search path of root filesystem:
+ User customized search path by module parameter 'path'[1]
"/lib/firmware/updates/" UTS_RELEASE,
"/lib/firmware/updates",
"/lib/firmware/" UTS_RELEASE,
"/lib/firmware"
- If found, goto 7), else goto 2)
+ [1], the 'path' is a string parameter which length should be less
+ than 256, user should pass 'firmware_class.path=$CUSTOMIZED_PATH'
+ if firmware_class is built in kernel(the general situation)
+
2), userspace:
- /sys/class/firmware/xxx/{loading,data} appear.
- hotplug gets called with a firmware identifier in $FIRMWARE
@@ -114,3 +119,10 @@
on the setup, so I think that the choice on what firmware to make
persistent should be left to userspace.
+ about firmware cache:
+ --------------------
+ After firmware cache mechanism is introduced during system sleep,
+ request_firmware can be called safely inside device's suspend and
+ resume callback, and callers need't cache the firmware by
+ themselves any more for dealing with firmware loss during system
+ resume.
diff --git a/Documentation/power/pm_qos_interface.txt b/Documentation/power/pm_qos_interface.txt
index 17e130a..79a2a58 100644
--- a/Documentation/power/pm_qos_interface.txt
+++ b/Documentation/power/pm_qos_interface.txt
@@ -99,7 +99,7 @@
From kernel mode the use of this interface is the following:
-int dev_pm_qos_add_request(device, handle, value):
+int dev_pm_qos_add_request(device, handle, type, value):
Will insert an element into the list for that identified device with the
target value. Upon change to this list the new target is recomputed and any
registered notifiers are called only if the target value is now different.
diff --git a/Documentation/telephony/00-INDEX b/Documentation/telephony/00-INDEX
deleted file mode 100644
index 4ffe0ed..0000000
--- a/Documentation/telephony/00-INDEX
+++ /dev/null
@@ -1,4 +0,0 @@
-00-INDEX
- - this file.
-ixj.txt
- - document describing the Quicknet drivers.
diff --git a/Documentation/telephony/ixj.txt b/Documentation/telephony/ixj.txt
deleted file mode 100644
index db94fb6..0000000
--- a/Documentation/telephony/ixj.txt
+++ /dev/null
@@ -1,394 +0,0 @@
-Linux Quicknet-Drivers-Howto
-Quicknet Technologies, Inc. (www.quicknet.net)
-Version 0.3.4 December 18, 1999
-
-1.0 Introduction
-
-This document describes the first GPL release version of the Linux
-driver for the Quicknet Internet PhoneJACK and Internet LineJACK
-cards. More information about these cards is available at
-www.quicknet.net. The driver version discussed in this document is
-0.3.4.
-
-These cards offer nice telco style interfaces to use your standard
-telephone/key system/PBX as the user interface for VoIP applications.
-The Internet LineJACK also offers PSTN connectivity for a single line
-Internet to PSTN gateway. Of course, you can add more than one card
-to a system to obtain multi-line functionality. At this time, the
-driver supports the POTS port on both the Internet PhoneJACK and the
-Internet LineJACK, but the PSTN port on the latter card is not yet
-supported.
-
-This document, and the drivers for the cards, are intended for a
-limited audience that includes technically capable programmers who
-would like to experiment with Quicknet cards. The drivers are
-considered in ALPHA status and are not yet considered stable enough
-for general, widespread use in an unlimited audience.
-
-That's worth saying again:
-
-THE LINUX DRIVERS FOR QUICKNET CARDS ARE PRESENTLY IN A ALPHA STATE
-AND SHOULD NOT BE CONSIDERED AS READY FOR NORMAL WIDESPREAD USE.
-
-They are released early in the spirit of Internet development and to
-make this technology available to innovators who would benefit from
-early exposure.
-
-When we promote the device driver to "beta" level it will be
-considered ready for non-programmer, non-technical users. Until then,
-please be aware that these drivers may not be stable and may affect
-the performance of your system.
-
-
-1.1 Latest Additions/Improvements
-
-The 0.3.4 version of the driver is the first GPL release. Several
-features had to be removed from the prior binary only module, mostly
-for reasons of Intellectual Property rights. We can't release
-information that is not ours - so certain aspects of the driver had to
-be removed to protect the rights of others.
-
-Specifically, very old Internet PhoneJACK cards have non-standard
-G.723.1 codecs (due to the early nature of the DSPs in those days).
-The auto-conversion code to bring those cards into compliance with
-today's standards is available as a binary only module to those people
-needing it. If you bought your card after 1997 or so, you are OK -
-it's only the very old cards that are affected.
-
-Also, the code to download G.728/G.729/G.729a codecs to the DSP is
-available as a binary only module as well. This IP is not ours to
-release.
-
-Hooks are built into the GPL driver to allow it to work with other
-companion modules that are completely separate from this module.
-
-1.2 Copyright, Trademarks, Disclaimer, & Credits
-
-Copyright
-
-Copyright (c) 1999 Quicknet Technologies, Inc. Permission is granted
-to freely copy and distribute this document provided you preserve it
-in its original form. For corrections and minor changes contact the
-maintainer at linux@quicknet.net.
-
-Trademarks
-
-Internet PhoneJACK and Internet LineJACK are registered trademarks of
-Quicknet Technologies, Inc.
-
-Disclaimer
-
-Much of the info in this HOWTO is early information released by
-Quicknet Technologies, Inc. for the express purpose of allowing early
-testing and use of the Linux drivers developed for their products.
-While every attempt has been made to be thorough, complete and
-accurate, the information contained here may be unreliable and there
-are likely a number of errors in this document. Please let the
-maintainer know about them. Since this is free documentation, it
-should be obvious that neither I nor previous authors can be held
-legally responsible for any errors.
-
-Credits
-
-This HOWTO was written by:
-
- Greg Herlein <gherlein@quicknet.net>
- Ed Okerson <eokerson@quicknet.net>
-
-1.3 Future Plans: You Can Help
-
-Please let the maintainer know of any errors in facts, opinions,
-logic, spelling, grammar, clarity, links, etc. But first, if the date
-is over a month old, check to see that you have the latest
-version. Please send any info that you think belongs in this document.
-
-You can also contribute code and/or bug-fixes for the sample
-applications.
-
-
-1.4 Where to get things
-
-Info on latest versions of the driver are here:
-
-http://web.archive.org/web/*/http://www.quicknet.net/develop.htm
-
-1.5 Mailing List
-
-Quicknet operates a mailing list to provide a public forum on using
-these drivers.
-
-To subscribe to the linux-sdk mailing list, send an email to:
-
- majordomo@linux.quicknet.net
-
-In the body of the email, type:
-
- subscribe linux-sdk <your-email-address>
-
-Please delete any signature block that you would normally add to the
-bottom of your email - it tends to confuse majordomo.
-
-To send mail to the list, address your mail to
-
- linux-sdk@linux.quicknet.net
-
-Your message will go out to everyone on the list.
-
-To unsubscribe to the linux-sdk mailing list, send an email to:
-
- majordomo@linux.quicknet.net
-
-In the body of the email, type:
-
- unsubscribe linux-sdk <your-email-address>
-
-
-
-2.0 Requirements
-
-2.1 Quicknet Card(s)
-
-You will need at least one Internet PhoneJACK or Internet LineJACK
-cards. These are ISA or PCI bus devices that use Plug-n-Play for
-configuration, and use no IRQs. The driver will support up to 16
-cards in any one system, of any mix between the two types.
-
-Note that you will need two cards to do any useful testing alone, since
-you will need a card on both ends of the connection. Of course, if
-you are doing collaborative work, perhaps your friends or coworkers
-have cards too. If not, we'll gladly sell them some!
-
-
-2.2 ISAPNP
-
-Since the Quicknet cards are Plug-n-Play devices, you will need the
-isapnp tools package to configure the cards, or you can use the isapnp
-module to autoconfigure them. The former package probably came with
-your Linux distribution. Documentation on this package is available
-online at:
-
-http://mailer.wiwi.uni-marburg.de/linux/LDP/HOWTO/Plug-and-Play-HOWTO.html
-
-The isapnp autoconfiguration is available on the Quicknet website at:
-
- http://www.quicknet.net/develop.htm
-
-though it may be in the kernel by the time you read this.
-
-
-3.0 Card Configuration
-
-If you did not get your drivers as part of the linux kernel, do the
-following to install them:
-
- a. untar the distribution file. We use the following command:
- tar -xvzf ixj-0.x.x.tgz
-
-This creates a subdirectory holding all the necessary files. Go to that
-subdirectory.
-
- b. run the "ixj_dev_create" script to remove any stray device
-files left in the /dev directory, and to create the new officially
-designated device files. Note that the old devices were called
-/dev/ixj, and the new method uses /dev/phone.
-
- c. type "make;make install" - this will compile and install the
-module.
-
- d. type "depmod -av" to rebuild all your kernel version dependencies.
-
- e. if you are using the isapnp module to configure the cards
- automatically, then skip to step f. Otherwise, ensure that you
- have run the isapnp configuration utility to properly configure
- the cards.
-
- e1. The Internet PhoneJACK has one configuration register that
- requires 16 IO ports. The Internet LineJACK card has two
- configuration registers and isapnp reports that IO 0
- requires 16 IO ports and IO 1 requires 8. The Quicknet
- driver assumes that these registers are configured to be
- contiguous, i.e. if IO 0 is set to 0x340 then IO 1 should
- be set to 0x350.
-
- Make sure that none of the cards overlap if you have
- multiple cards in the system.
-
- If you are new to the isapnp tools, you can jumpstart
- yourself by doing the following:
-
- e2. go to the /etc directory and run pnpdump to get a blank
- isapnp.conf file.
-
- pnpdump > /etc/isapnp.conf
-
- e3. edit the /etc/isapnp.conf file to set the IO warnings and
- the register IO addresses. The IO warnings means that you
- should find the line in the file that looks like this:
-
- (CONFLICT (IO FATAL)(IRQ FATAL)(DMA FATAL)(MEM FATAL)) # or WARNING
-
- and you should edit the line to look like this:
-
- (CONFLICT (IO WARNING)(IRQ FATAL)(DMA FATAL)(MEM FATAL)) #
- or WARNING
-
- The next step is to set the IO port addresses. The issue
- here is that isapnp does not identify all of the ports out
- there. Specifically any device that does not have a driver
- or module loaded by Linux will not be registered. This
- includes older sound cards and network cards. We have
- found that the IO port 0x300 is often used even though
- isapnp claims that no-one is using those ports. We
- recommend that for a single card installation that port
- 0x340 (and 0x350) be used. The IO port line should change
- from this:
-
- (IO 0 (SIZE 16) (BASE 0x0300) (CHECK))
-
- to this:
-
- (IO 0 (SIZE 16) (BASE 0x0340) )
-
- e4. if you have multiple Quicknet cards, make sure that you do
- not have any overlaps. Be especially careful if you are
- mixing Internet PhoneJACK and Internet LineJACK cards in
- the same system. In these cases we recommend moving the
- IO port addresses to the 0x400 block. Please note that on
- a few machines the 0x400 series are used. Feel free to
- experiment with other addresses. Our cards have been
- proven to work using IO addresses of up to 0xFF0.
-
- e5. the last step is to uncomment the activation line so the
- drivers will be associated with the port. This means the
- line (immediately below) the IO line should go from this:
-
- # (ACT Y)
-
- to this:
-
- (ACT Y)
-
- Once you have finished editing the isapnp.conf file you
- must submit it into the pnp driverconfigure the cards.
- This is done using the following command:
-
- isapnp isapnp.conf
-
- If this works you should see a line that identifies the
- Quicknet device, the IO port(s) chosen, and a message
- "Enabled OK".
-
- f. if you are loading the module by hand, use insmod. An example
-of this would look like this:
-
- insmod phonedev
- insmod ixj dspio=0x320,0x310 xio=0,0x330
-
-Then verify the module loaded by running lsmod. If you are not using a
-module that matches your kernel version, you may need to "force" the
-load using the -f option in the insmod command.
-
- insmod phonedev
- insmod -f ixj dspio=0x320,0x310 xio=0,0x330
-
-
-If you are using isapnp to autoconfigure your card, then you do NOT
-need any of the above, though you need to use depmod to load the
-driver, like this:
-
- depmod ixj
-
-which will result in the needed drivers getting loaded automatically.
-
- g. if you are planning on having the kernel automatically request
-the module for you, then you need to edit /etc/conf.modules and add the
-following lines:
-
- options ixj dspio=0x340 xio=0x330 ixjdebug=0
-
-If you do this, then when you execute an application that uses the
-module the kernel will request that it is loaded.
-
- h. if you want non-root users to be able to read and write to the
-ixj devices (this is a good idea!) you should do the following:
-
- - decide upon a group name to use and create that group if
- needed. Add the user names to that group that you wish to
- have access to the device. For example, we typically will
- create a group named "ixj" in /etc/group and add all users
- to that group that we want to run software that can use the
- ixjX devices.
-
- - change the permissions on the device files, like this:
-
- chgrp ixj /dev/ixj*
- chmod 660 /dev/ixj*
-
-Once this is done, then non-root users should be able to use the
-devices. If you have enabled autoloading of modules, then the user
-should be able to open the device and have the module loaded
-automatically for them.
-
-
-4.0 Driver Installation problems.
-
-We have tested these drivers on the 2.2.9, 2.2.10, 2.2.12, and 2.2.13 kernels
-and in all cases have eventually been able to get the drivers to load and
-run. We have found four types of problems that prevent this from happening.
-The problems and solutions are:
-
- a. A step was missed in the installation. Go back and use section 3
-as a checklist. Many people miss running the ixj_dev_create script and thus
-never load the device names into the filesystem.
-
- b. The kernel is inconsistently linked. We have found this problem in
-the Out Of the Box installation of several distributions. The symptoms
-are that neither driver will load, and that the unknown symbols include "jiffy"
-and "kmalloc". The solution is to recompile both the kernel and the
-modules. The command string for the final compile looks like this:
-
- In the kernel directory:
- 1. cp .config /tmp
- 2. make mrproper
- 3. cp /tmp/.config .
- 4. make clean;make bzImage;make modules;make modules_install
-
-This rebuilds both the kernel and all the modules and makes sure they all
-have the same linkages. This generally solves the problem once the new
-kernel is installed and the system rebooted.
-
- c. The kernel has been patched, then unpatched. This happens when
-someone decides to use an earlier kernel after they load a later kernel.
-The symptoms are proceeding through all three above steps and still not
-being able to load the driver. What has happened is that the generated
-header files are out of sync with the kernel itself. The solution is
-to recompile (again) using "make mrproper". This will remove and then
-regenerate all the necessary header files. Once this is done, then you
-need to install and reboot the kernel. We have not seen any problem
-loading one of our drivers after this treatment.
-
-5.0 Known Limitations
-
-We cannot currently play "dial-tone" and listen for DTMF digits at the
-same time using the ISA PhoneJACK. This is a bug in the 8020 DSP chip
-used on that product. All other Quicknet products function normally
-in this regard. We have a work-around, but it's not done yet. Until
-then, if you want dial-tone, you can always play a recorded dial-tone
-sound into the audio until you have gathered the DTMF digits.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
diff --git a/Documentation/usb/error-codes.txt b/Documentation/usb/error-codes.txt
index b3f606b..9c3eb84 100644
--- a/Documentation/usb/error-codes.txt
+++ b/Documentation/usb/error-codes.txt
@@ -21,6 +21,8 @@
USB-specific:
+-EBUSY The URB is already active.
+
-ENODEV specified USB-device or bus doesn't exist
-ENOENT specified interface or endpoint does not exist or
@@ -35,9 +37,8 @@
d) ISO: number_of_packets is < 0
e) various other cases
--EAGAIN a) specified ISO start frame too early
- b) (using ISO-ASAP) too much scheduled for the future
- wait some time and try again.
+-EXDEV ISO: URB_ISO_ASAP wasn't specified and all the frames
+ the URB would be scheduled in have already expired.
-EFBIG Host controller driver can't schedule that many ISO frames.
diff --git a/Documentation/usb/mass-storage.txt b/Documentation/usb/mass-storage.txt
index e9b9334..59063ad 100644
--- a/Documentation/usb/mass-storage.txt
+++ b/Documentation/usb/mass-storage.txt
@@ -20,9 +20,9 @@
This document describes how to use the gadget from user space, its
relation to mass storage function (or MSF) and different gadgets
- using it, and how it differs from File Storage Gadget (or FSG). It
- will talk only briefly about how to use MSF within composite
- gadgets.
+ using it, and how it differs from File Storage Gadget (or FSG)
+ (which is no longer included in Linux). It will talk only briefly
+ about how to use MSF within composite gadgets.
* Module parameters
@@ -198,16 +198,15 @@
The Mass Storage Function and thus the Mass Storage Gadget has been
based on the File Storage Gadget. The difference between the two is
that MSG is a composite gadget (ie. uses the composite framework)
- while file storage gadget is a traditional gadget. From userspace
+ while file storage gadget was a traditional gadget. From userspace
point of view this distinction does not really matter, but from
kernel hacker's point of view, this means that (i) MSG does not
duplicate code needed for handling basic USB protocol commands and
(ii) MSF can be used in any other composite gadget.
- Because of that, File Storage Gadget has been deprecated and
- scheduled to be removed in Linux 3.8. All users need to transition
- to the Mass Storage Gadget by that time. The two gadgets behave
- mostly the same from the outside except:
+ Because of that, File Storage Gadget has been removed in Linux 3.8.
+ All users need to transition to the Mass Storage Gadget. The two
+ gadgets behave mostly the same from the outside except:
1. In FSG the “removable” and “cdrom” module parameters set the flag
for all logical units whereas in MSG they accept a list of y/n
diff --git a/Documentation/zh_CN/arm/kernel_user_helpers.txt b/Documentation/zh_CN/arm/kernel_user_helpers.txt
new file mode 100644
index 0000000..cd7fc8f
--- /dev/null
+++ b/Documentation/zh_CN/arm/kernel_user_helpers.txt
@@ -0,0 +1,284 @@
+Chinese translated version of Documentation/arm/kernel_user_helpers.txt
+
+If you have any comment or update to the content, please contact the
+original document maintainer directly. However, if you have a problem
+communicating in English you can also ask the Chinese maintainer for
+help. Contact the Chinese maintainer if this translation is outdated
+or if there is a problem with the translation.
+
+Maintainer: Nicolas Pitre <nicolas.pitre@linaro.org>
+ Dave Martin <dave.martin@linaro.org>
+Chinese maintainer: Fu Wei <tekkamanninja@gmail.com>
+---------------------------------------------------------------------
+Documentation/arm/kernel_user_helpers.txt 的中文翻译
+
+如果想评论或更新本文的内容，请直接联系原文档的维护者。如果你使用英文
+交流有困难的话，也可以向中文版维护者求助。如果本翻译更新不及时或者翻
+译存在问题，请联系中文版维护者。
+英文版维护者： Nicolas Pitre <nicolas.pitre@linaro.org>
+ Dave Martin <dave.martin@linaro.org>
+中文版维护者： 傅炜 Fu Wei <tekkamanninja@gmail.com>
+中文版翻译者： 傅炜 Fu Wei <tekkamanninja@gmail.com>
+中文版校译者： 宋冬生 Dongsheng Song <dongshneg.song@gmail.com>
+ 傅炜 Fu Wei <tekkamanninja@gmail.com>
+
+
+以下为正文
+---------------------------------------------------------------------
+内核提供的用户空间辅助代码
+=========================
+
+在内核内存空间的固定地址处，有一个由内核提供并可从用户空间访问的代码
+段。它用于向用户空间提供因在许多 ARM CPU 中未实现的特性和/或指令而需
+内核提供帮助的某些操作。这些代码直接在用户模式下执行的想法是为了获得
+最佳效率，但那些与内核计数器联系过于紧密的部分，则被留给了用户库实现。
+事实上，此代码甚至可能因不同的 CPU 而异，这取决于其可用的指令集或它
+是否为 SMP 系统。换句话说，内核保留在不作出警告的情况下根据需要更改
+这些代码的权利。只有本文档描述的入口及其结果是保证稳定的。
+
+这与完全成熟的 VDSO 实现不同（但两者并不冲突），尽管如此，VDSO 可阻止
+某些通过常量高效跳转到那些代码段的汇编技巧。且由于那些代码段在返回用户
+代码前仅使用少量的代码周期，则一个 VDSO 间接远程调用将会在这些简单的
+操作上增加一个可测量的开销。
+
+在对那些拥有原生支持的新型处理器进行代码优化时，仅在已为其他操作使用
+了类似的新增指令，而导致二进制结果已与早期 ARM 处理器不兼容的情况下，
+用户空间才应绕过这些辅助代码，并在内联函数中实现这些操作（无论是通过
+编译器在代码中直接放置，还是作为库函数调用实现的一部分）。也就是说，
+如果你编译的代码不会为了其他目的使用新指令，则不要仅为了避免使用这些
+内核辅助代码，导致二进制程序无法在早期处理器上运行。
+
+新的辅助代码可能随着时间的推移而增加，所以新内核中的某些辅助代码在旧
+内核中可能不存在。因此，程序必须在对任何辅助代码调用假设是安全之前，
+检测 __kuser_helper_version 的值（见下文）。理想情况下，这种检测应该
+只在进程启动时执行一次；如果内核版本不支持所需辅助代码，则该进程可尽早
+中止执行。
+
+kuser_helper_version
+--------------------
+
+位置: 0xffff0ffc
+
+参考声明:
+
+ extern int32_t __kuser_helper_version;
+
+定义:
+
+ 这个区域包含了当前运行内核实现的辅助代码版本号。用户空间可以通过读
+ 取此版本号以确定特定的辅助代码是否存在。
+
+使用范例:
+
+#define __kuser_helper_version (*(int32_t *)0xffff0ffc)
+
+void check_kuser_version(void)
+{
+ if (__kuser_helper_version < 2) {
+ fprintf(stderr, "can't do atomic operations, kernel too old\n");
+ abort();
+ }
+}
+
+注意:
+
+ 用户空间可以假设这个域的值不会在任何单个进程的生存期内改变。也就
+ 是说，这个域可以仅在库的初始化阶段或进程启动阶段读取一次。
+
+kuser_get_tls
+-------------
+
+位置: 0xffff0fe0
+
+参考原型:
+
+ void * __kuser_get_tls(void);
+
+输入:
+
+ lr = 返回地址
+
+输出:
+
+ r0 = TLS 值
+
+被篡改的寄存器:
+
+ 无
+
+定义:
+
+ 获取之前通过 __ARM_NR_set_tls 系统调用设置的 TLS 值。
+
+使用范例:
+
+typedef void * (__kuser_get_tls_t)(void);
+#define __kuser_get_tls (*(__kuser_get_tls_t *)0xffff0fe0)
+
+void foo()
+{
+ void *tls = __kuser_get_tls();
+ printf("TLS = %p\n", tls);
+}
+
+注意:
+
+ - 仅在 __kuser_helper_version >= 1 时，此辅助代码存在
+ （从内核版本 2.6.12 开始）。
+
+kuser_cmpxchg
+-------------
+
+位置: 0xffff0fc0
+
+参考原型:
+
+ int __kuser_cmpxchg(int32_t oldval, int32_t newval, volatile int32_t *ptr);
+
+输入:
+
+ r0 = oldval
+ r1 = newval
+ r2 = ptr
+ lr = 返回地址
+
+输出:
+
+ r0 = 成功代码 (零或非零)
+ C flag = 如果 r0 == 0 则置 1，如果 r0 != 0 则清零。
+
+被篡改的寄存器:
+
+ r3, ip, flags
+
+定义:
+
+ 仅在 *ptr 为 oldval 时原子保存 newval 于 *ptr 中。
+ 如果 *ptr 被改变，则返回值为零，否则为非零值。
+ 如果 *ptr 被改变，则 C flag 也会被置 1，以实现调用代码中的汇编
+ 优化。
+
+使用范例:
+
+typedef int (__kuser_cmpxchg_t)(int oldval, int newval, volatile int *ptr);
+#define __kuser_cmpxchg (*(__kuser_cmpxchg_t *)0xffff0fc0)
+
+int atomic_add(volatile int *ptr, int val)
+{
+ int old, new;
+
+ do {
+ old = *ptr;
+ new = old + val;
+ } while(__kuser_cmpxchg(old, new, ptr));
+
+ return new;
+}
+
+注意:
+
+ - 这个例程已根据需要包含了内存屏障。
+
+ - 仅在 __kuser_helper_version >= 2 时，此辅助代码存在
+ （从内核版本 2.6.12 开始）。
+
+kuser_memory_barrier
+--------------------
+
+位置: 0xffff0fa0
+
+参考原型:
+
+ void __kuser_memory_barrier(void);
+
+输入:
+
+ lr = 返回地址
+
+输出:
+
+ 无
+
+被篡改的寄存器:
+
+ 无
+
+定义:
+
+ 应用于任何需要内存屏障以防止手动数据修改带来的一致性问题，以及
+ __kuser_cmpxchg 中。
+
+使用范例:
+
+typedef void (__kuser_dmb_t)(void);
+#define __kuser_dmb (*(__kuser_dmb_t *)0xffff0fa0)
+
+注意:
+
+ - 仅在 __kuser_helper_version >= 3 时，此辅助代码存在
+ （从内核版本 2.6.15 开始）。
+
+kuser_cmpxchg64
+---------------
+
+位置: 0xffff0f60
+
+参考原型:
+
+ int __kuser_cmpxchg64(const int64_t *oldval,
+ const int64_t *newval,
+ volatile int64_t *ptr);
+
+输入:
+
+ r0 = 指向 oldval
+ r1 = 指向 newval
+ r2 = 指向目标值
+ lr = 返回地址
+
+输出:
+
+ r0 = 成功代码 (零或非零)
+ C flag = 如果 r0 == 0 则置 1，如果 r0 != 0 则清零。
+
+被篡改的寄存器:
+
+ r3, lr, flags
+
+定义:
+
+ 仅在 *ptr 等于 *oldval 指向的 64 位值时，原子保存 *newval
+ 指向的 64 位值于 *ptr 中。如果 *ptr 被改变，则返回值为零，
+ 否则为非零值。
+
+ 如果 *ptr 被改变，则 C flag 也会被置 1，以实现调用代码中的汇编
+ 优化。
+
+使用范例:
+
+typedef int (__kuser_cmpxchg64_t)(const int64_t *oldval,
+ const int64_t *newval,
+ volatile int64_t *ptr);
+#define __kuser_cmpxchg64 (*(__kuser_cmpxchg64_t *)0xffff0f60)
+
+int64_t atomic_add64(volatile int64_t *ptr, int64_t val)
+{
+ int64_t old, new;
+
+ do {
+ old = *ptr;
+ new = old + val;
+ } while(__kuser_cmpxchg64(&old, &new, ptr));
+
+ return new;
+}
+
+注意:
+
+ - 这个例程已根据需要包含了内存屏障。
+
+ - 由于这个过程的代码长度（此辅助代码跨越 2 个常规的 kuser “槽”），
+ 因此 0xffff0f80 不被作为有效的入口点。
+
+ - 仅在 __kuser_helper_version >= 5 时，此辅助代码存在
+ （从内核版本 3.1 开始）。
diff --git a/Documentation/zh_CN/arm64/memory.txt b/Documentation/zh_CN/arm64/memory.txt
index 83b5193..a5f6283 100644
--- a/Documentation/zh_CN/arm64/memory.txt
+++ b/Documentation/zh_CN/arm64/memory.txt
@@ -47,21 +47,21 @@
-----------------------------------------------------------------------
0000000000000000 0000007fffffffff 512GB 用户空间
-ffffff8000000000 ffffffbbfffcffff ~240GB vmalloc
+ffffff8000000000 ffffffbbfffeffff ~240GB vmalloc
-ffffffbbfffd0000 ffffffbcfffdffff 64KB [防护页]
-
-ffffffbbfffe0000 ffffffbcfffeffff 64KB PCI I/O 空间
-
-ffffffbbffff0000 ffffffbcffffffff 64KB [防护页]
+ffffffbbffff0000 ffffffbbffffffff 64KB [防护页]
ffffffbc00000000 ffffffbdffffffff 8GB vmemmap
-ffffffbe00000000 ffffffbffbffffff ~8GB [防护页，未来用于 vmmemap]
+ffffffbe00000000 ffffffbffbbfffff ~8GB [防护页，未来用于 vmmemap]
+
+ffffffbffbe00000 ffffffbffbe0ffff 64KB PCI I/O 空间
+
+ffffffbbffff0000 ffffffbcffffffff ~2MB [防护页]
ffffffbffc000000 ffffffbfffffffff 64MB 模块
-ffffffc000000000 ffffffffffffffff 256GB 内存空间
+ffffffc000000000 ffffffffffffffff 256GB 内核逻辑内存映射
4KB 页大小的转换表查找：
diff --git a/MAINTAINERS b/MAINTAINERS
index cf7ff78..23b9584 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3596,7 +3596,6 @@
F: drivers/hv/
F: drivers/hid/hid-hyperv.c
F: drivers/net/hyperv/
-F: drivers/staging/hv/
I2C OVER PARALLEL PORT
M: Jean Delvare <khali@linux-fr.org>
@@ -3789,6 +3788,15 @@
S: Maintained
F: drivers/usb/atm/ueagle-atm.c
+INDUSTRY PACK SUBSYSTEM (IPACK)
+M: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
+M: Jens Taprogge <jens.taprogge@taprogge.org>
+M: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+L: industrypack-devel@lists.sourceforge.net
+W: http://industrypack.sourceforge.net
+S: Maintained
+F: drivers/ipack/
+
INTEGRITY MEASUREMENT ARCHITECTURE (IMA)
M: Mimi Zohar <zohar@us.ibm.com>
S: Supported
@@ -7422,6 +7430,7 @@
TTY LAYER
M: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+M: Jiri Slaby <jslaby@suse.cz>
S: Supported
T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git
F: drivers/tty/
@@ -7578,12 +7587,6 @@
S: Supported
F: drivers/usb/storage/uas.c
-USB BLOCK DRIVER (UB ub)
-M: Pete Zaitcev <zaitcev@redhat.com>
-L: linux-usb@vger.kernel.org
-S: Supported
-F: drivers/block/ub.c
-
USB CDC ETHERNET DRIVER
M: Oliver Neukum <oliver@neukum.org>
L: linux-usb@vger.kernel.org
diff --git a/arch/alpha/include/asm/ioctls.h b/arch/alpha/include/asm/ioctls.h
index 80e1cee..92c557b 100644
--- a/arch/alpha/include/asm/ioctls.h
+++ b/arch/alpha/include/asm/ioctls.h
@@ -95,6 +95,9 @@
#define TIOCGDEV _IOR('T',0x32, unsigned int) /* Get primary device node of /dev/console */
#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */
#define TIOCVHANGUP 0x5437
+#define TIOCGPKT _IOR('T', 0x38, int) /* Get packet mode state */
+#define TIOCGPTLCK _IOR('T', 0x39, int) /* Get Pty lock state */
+#define TIOCGEXCL _IOR('T', 0x40, int) /* Get exclusive mode state */
#define TIOCSERCONFIG 0x5453
#define TIOCSERGWILD 0x5454
diff --git a/arch/alpha/kernel/srmcons.c b/arch/alpha/kernel/srmcons.c
index 5d58652..59b7bba 100644
--- a/arch/alpha/kernel/srmcons.c
+++ b/arch/alpha/kernel/srmcons.c
@@ -205,7 +205,6 @@
static int __init
srmcons_init(void)
{
- tty_port_init(&srmcons_singleton.port);
setup_timer(&srmcons_singleton.timer, srmcons_receive_chars,
(unsigned long)&srmcons_singleton);
if (srm_is_registered_console) {
@@ -215,6 +214,9 @@
driver = alloc_tty_driver(MAX_SRM_CONSOLE_DEVICES);
if (!driver)
return -ENOMEM;
+
+ tty_port_init(&srmcons_singleton.port);
+
driver->driver_name = "srm";
driver->name = "srm";
driver->major = 0; /* dynamic */
@@ -227,6 +229,7 @@
err = tty_register_driver(driver);
if (err) {
put_tty_driver(driver);
+ tty_port_destroy(&srmcons_singleton.port);
return err;
}
srmcons_driver = driver;
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 67f1fdb..8a027f9 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -366,6 +366,7 @@
config ARCH_CLPS711X
bool "Cirrus Logic CLPS711x/EP721x/EP731x-based"
+ select ARCH_REQUIRE_GPIOLIB
select ARCH_USES_GETTIMEOFFSET
select CLKDEV_LOOKUP
select COMMON_CLK
@@ -908,6 +909,7 @@
config PLAT_SPEAR
bool "ST SPEAr"
+ select ARCH_HAS_CPUFREQ
select ARCH_REQUIRE_GPIOLIB
select ARM_AMBA
select CLKDEV_LOOKUP
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index 55c57ea..b4587b2 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -799,6 +799,7 @@
compatible = "fsl,imx28-auart", "fsl,imx23-auart";
reg = <0x8006a000 0x2000>;
interrupts = <112 70 71>;
+ fsl,auart-dma-channel = <8 9>;
clocks = <&clks 45>;
status = "disabled";
};
diff --git a/arch/arm/configs/afeb9260_defconfig b/arch/arm/configs/afeb9260_defconfig
index c285a9d..a8dbc1e 100644
--- a/arch/arm/configs/afeb9260_defconfig
+++ b/arch/arm/configs/afeb9260_defconfig
@@ -79,7 +79,7 @@
CONFIG_USB_GADGET=y
CONFIG_USB_ZERO=m
CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
+CONFIG_USB_MASS_STORAGE=m
CONFIG_USB_G_SERIAL=m
CONFIG_RTC_CLASS=y
CONFIG_RTC_DEBUG=y
diff --git a/arch/arm/configs/at91sam9260_defconfig b/arch/arm/configs/at91sam9260_defconfig
index 505b376..0ea5d2c 100644
--- a/arch/arm/configs/at91sam9260_defconfig
+++ b/arch/arm/configs/at91sam9260_defconfig
@@ -75,7 +75,7 @@
CONFIG_USB_GADGET=y
CONFIG_USB_ZERO=m
CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
+CONFIG_USB_MASS_STORAGE=m
CONFIG_USB_G_SERIAL=m
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_AT91SAM9=y
diff --git a/arch/arm/configs/at91sam9261_defconfig b/arch/arm/configs/at91sam9261_defconfig
index 1e8712e..c87beb9 100644
--- a/arch/arm/configs/at91sam9261_defconfig
+++ b/arch/arm/configs/at91sam9261_defconfig
@@ -125,7 +125,7 @@
CONFIG_USB_ZERO=m
CONFIG_USB_ETH=m
CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
+CONFIG_USB_MASS_STORAGE=m
CONFIG_USB_G_SERIAL=m
CONFIG_MMC=y
CONFIG_MMC_ATMELMCI=m
diff --git a/arch/arm/configs/at91sam9263_defconfig b/arch/arm/configs/at91sam9263_defconfig
index d2050ca..c5212f4 100644
--- a/arch/arm/configs/at91sam9263_defconfig
+++ b/arch/arm/configs/at91sam9263_defconfig
@@ -133,7 +133,7 @@
CONFIG_USB_ZERO=m
CONFIG_USB_ETH=m
CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
+CONFIG_USB_MASS_STORAGE=m
CONFIG_USB_G_SERIAL=m
CONFIG_MMC=y
CONFIG_SDIO_UART=m
diff --git a/arch/arm/configs/at91sam9g20_defconfig b/arch/arm/configs/at91sam9g20_defconfig
index e1b0e80..3b18810 100644
--- a/arch/arm/configs/at91sam9g20_defconfig
+++ b/arch/arm/configs/at91sam9g20_defconfig
@@ -96,7 +96,7 @@
CONFIG_USB_GADGET=y
CONFIG_USB_ZERO=m
CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
+CONFIG_USB_MASS_STORAGE=m
CONFIG_USB_G_SERIAL=m
CONFIG_MMC=y
CONFIG_MMC_ATMELMCI=m
diff --git a/arch/arm/configs/corgi_defconfig b/arch/arm/configs/corgi_defconfig
index 4b8a25d..1fd1d1d 100644
--- a/arch/arm/configs/corgi_defconfig
+++ b/arch/arm/configs/corgi_defconfig
@@ -218,7 +218,7 @@
CONFIG_USB_ZERO=m
CONFIG_USB_ETH=m
CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
+CONFIG_USB_MASS_STORAGE=m
CONFIG_USB_G_SERIAL=m
CONFIG_MMC=y
CONFIG_MMC_PXA=y
diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig
index 67b5abb6..4ea7c95 100644
--- a/arch/arm/configs/davinci_all_defconfig
+++ b/arch/arm/configs/davinci_all_defconfig
@@ -144,7 +144,7 @@
CONFIG_USB_ZERO=m
CONFIG_USB_ETH=m
CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
+CONFIG_USB_MASS_STORAGE=m
CONFIG_USB_G_SERIAL=m
CONFIG_USB_G_PRINTER=m
CONFIG_USB_CDC_COMPOSITE=m
diff --git a/arch/arm/configs/h7202_defconfig b/arch/arm/configs/h7202_defconfig
index 69405a7..e16d3f3 100644
--- a/arch/arm/configs/h7202_defconfig
+++ b/arch/arm/configs/h7202_defconfig
@@ -34,8 +34,7 @@
CONFIG_USB_GADGET=m
CONFIG_USB_ZERO=m
CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
-CONFIG_USB_FILE_STORAGE_TEST=y
+CONFIG_USB_MASS_STORAGE=m
CONFIG_USB_G_SERIAL=m
CONFIG_EXT2_FS=y
CONFIG_TMPFS=y
diff --git a/arch/arm/configs/magician_defconfig b/arch/arm/configs/magician_defconfig
index a691ef4..557dd29 100644
--- a/arch/arm/configs/magician_defconfig
+++ b/arch/arm/configs/magician_defconfig
@@ -136,7 +136,7 @@
CONFIG_USB_ETH=m
# CONFIG_USB_ETH_RNDIS is not set
CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
+CONFIG_USB_MASS_STORAGE=m
CONFIG_USB_G_SERIAL=m
CONFIG_USB_CDC_COMPOSITE=m
CONFIG_USB_GPIO_VBUS=y
diff --git a/arch/arm/configs/mini2440_defconfig b/arch/arm/configs/mini2440_defconfig
index 00630e6..a07948a 100644
--- a/arch/arm/configs/mini2440_defconfig
+++ b/arch/arm/configs/mini2440_defconfig
@@ -240,7 +240,7 @@
CONFIG_USB_ZERO=m
CONFIG_USB_ETH=m
CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
+CONFIG_USB_MASS_STORAGE=m
CONFIG_USB_G_SERIAL=m
CONFIG_USB_CDC_COMPOSITE=m
CONFIG_MMC=y
diff --git a/arch/arm/configs/omap1_defconfig b/arch/arm/configs/omap1_defconfig
index dde2a1a..42eab9a 100644
--- a/arch/arm/configs/omap1_defconfig
+++ b/arch/arm/configs/omap1_defconfig
@@ -214,8 +214,7 @@
CONFIG_USB_GADGET=y
CONFIG_USB_ETH=m
# CONFIG_USB_ETH_RNDIS is not set
-CONFIG_USB_FILE_STORAGE=m
-CONFIG_USB_FILE_STORAGE_TEST=y
+CONFIG_USB_MASS_STORAGE=m
CONFIG_MMC=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
diff --git a/arch/arm/configs/prima2_defconfig b/arch/arm/configs/prima2_defconfig
index 807d4e2..6a936c7 100644
--- a/arch/arm/configs/prima2_defconfig
+++ b/arch/arm/configs/prima2_defconfig
@@ -37,7 +37,6 @@
CONFIG_SPI_SPIDEV=y
# CONFIG_HWMON is not set
CONFIG_USB_GADGET=y
-CONFIG_USB_FILE_STORAGE=m
CONFIG_USB_MASS_STORAGE=m
CONFIG_MMC=y
CONFIG_MMC_SDHCI=y
diff --git a/arch/arm/configs/spitz_defconfig b/arch/arm/configs/spitz_defconfig
index df77931..2e0419d 100644
--- a/arch/arm/configs/spitz_defconfig
+++ b/arch/arm/configs/spitz_defconfig
@@ -214,7 +214,7 @@
CONFIG_USB_ZERO=m
CONFIG_USB_ETH=m
CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
+CONFIG_USB_MASS_STORAGE=m
CONFIG_USB_G_SERIAL=m
CONFIG_MMC=y
CONFIG_MMC_PXA=y
diff --git a/arch/arm/configs/stamp9g20_defconfig b/arch/arm/configs/stamp9g20_defconfig
index 52f1488..b845f55 100644
--- a/arch/arm/configs/stamp9g20_defconfig
+++ b/arch/arm/configs/stamp9g20_defconfig
@@ -97,7 +97,7 @@
CONFIG_USB_GADGET=m
CONFIG_USB_ZERO=m
CONFIG_USB_ETH=m
-CONFIG_USB_FILE_STORAGE=m
+CONFIG_USB_MASS_STORAGE=m
CONFIG_USB_G_SERIAL=m
CONFIG_MMC=y
CONFIG_MMC_ATMELMCI=y
diff --git a/arch/arm/configs/viper_defconfig b/arch/arm/configs/viper_defconfig
index 1d01ddd..d36e0d3 100644
--- a/arch/arm/configs/viper_defconfig
+++ b/arch/arm/configs/viper_defconfig
@@ -139,7 +139,7 @@
CONFIG_USB_GADGET=m
CONFIG_USB_ETH=m
CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
+CONFIG_USB_MASS_STORAGE=m
CONFIG_USB_G_SERIAL=m
CONFIG_USB_G_PRINTER=m
CONFIG_RTC_CLASS=y
diff --git a/arch/arm/configs/zeus_defconfig b/arch/arm/configs/zeus_defconfig
index 547a3c1..731d4f9 100644
--- a/arch/arm/configs/zeus_defconfig
+++ b/arch/arm/configs/zeus_defconfig
@@ -143,7 +143,7 @@
CONFIG_USB_PXA27X=y
CONFIG_USB_ETH=m
CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
+CONFIG_USB_MASS_STORAGE=m
CONFIG_USB_G_SERIAL=m
CONFIG_USB_G_PRINTER=m
CONFIG_MMC=y
diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h
index 42f042e..652b560 100644
--- a/arch/arm/include/asm/io.h
+++ b/arch/arm/include/asm/io.h
@@ -374,7 +374,7 @@
#ifdef CONFIG_MMU
#define ARCH_HAS_VALID_PHYS_ADDR_RANGE
-extern int valid_phys_addr_range(unsigned long addr, size_t size);
+extern int valid_phys_addr_range(phys_addr_t addr, size_t size);
extern int valid_mmap_phys_addr_range(unsigned long pfn, size_t size);
extern int devmem_is_allowed(unsigned long pfn);
#endif
diff --git a/arch/arm/mach-cns3xxx/cns3420vb.c b/arch/arm/mach-cns3xxx/cns3420vb.c
index 2c5fb4c..ae30539 100644
--- a/arch/arm/mach-cns3xxx/cns3420vb.c
+++ b/arch/arm/mach-cns3xxx/cns3420vb.c
@@ -24,6 +24,8 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/physmap.h>
#include <linux/mtd/partitions.h>
+#include <linux/usb/ehci_pdriver.h>
+#include <linux/usb/ohci_pdriver.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/hardware/gic.h>
@@ -32,6 +34,7 @@
#include <asm/mach/time.h>
#include <mach/cns3xxx.h>
#include <mach/irqs.h>
+#include <mach/pm.h>
#include "core.h"
#include "devices.h"
@@ -125,13 +128,52 @@
static u64 cns3xxx_usb_ehci_dma_mask = DMA_BIT_MASK(32);
+static int csn3xxx_usb_power_on(struct platform_device *pdev)
+{
+ /*
+ * EHCI and OHCI share the same clock and power,
+ * resetting twice would cause the 1st controller been reset.
+ * Therefore only do power up at the first up device, and
+ * power down at the last down device.
+ *
+ * Set USB AHB INCR length to 16
+ */
+ if (atomic_inc_return(&usb_pwr_ref) == 1) {
+ cns3xxx_pwr_power_up(1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_USB);
+ cns3xxx_pwr_clk_en(1 << PM_CLK_GATE_REG_OFFSET_USB_HOST);
+ cns3xxx_pwr_soft_rst(1 << PM_SOFT_RST_REG_OFFST_USB_HOST);
+ __raw_writel((__raw_readl(MISC_CHIP_CONFIG_REG) | (0X2 << 24)),
+ MISC_CHIP_CONFIG_REG);
+ }
+
+ return 0;
+}
+
+static void csn3xxx_usb_power_off(struct platform_device *pdev)
+{
+ /*
+ * EHCI and OHCI share the same clock and power,
+ * resetting twice would cause the 1st controller been reset.
+ * Therefore only do power up at the first up device, and
+ * power down at the last down device.
+ */
+ if (atomic_dec_return(&usb_pwr_ref) == 0)
+ cns3xxx_pwr_clk_dis(1 << PM_CLK_GATE_REG_OFFSET_USB_HOST);
+}
+
+static struct usb_ehci_pdata cns3xxx_usb_ehci_pdata = {
+ .power_on = csn3xxx_usb_power_on,
+ .power_off = csn3xxx_usb_power_off,
+};
+
static struct platform_device cns3xxx_usb_ehci_device = {
- .name = "cns3xxx-ehci",
+ .name = "ehci-platform",
.num_resources = ARRAY_SIZE(cns3xxx_usb_ehci_resources),
.resource = cns3xxx_usb_ehci_resources,
.dev = {
.dma_mask = &cns3xxx_usb_ehci_dma_mask,
.coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &cns3xxx_usb_ehci_pdata,
},
};
@@ -149,13 +191,20 @@
static u64 cns3xxx_usb_ohci_dma_mask = DMA_BIT_MASK(32);
+static struct usb_ohci_pdata cns3xxx_usb_ohci_pdata = {
+ .num_ports = 1,
+ .power_on = csn3xxx_usb_power_on,
+ .power_off = csn3xxx_usb_power_off,
+};
+
static struct platform_device cns3xxx_usb_ohci_device = {
- .name = "cns3xxx-ohci",
+ .name = "ohci-platform",
.num_resources = ARRAY_SIZE(cns3xxx_usb_ohci_resources),
.resource = cns3xxx_usb_ohci_resources,
.dev = {
.dma_mask = &cns3xxx_usb_ohci_dma_mask,
.coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &cns3xxx_usb_ohci_pdata,
},
};
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index b700685..56277a0 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -45,7 +45,6 @@
#include <asm/mach/flash.h>
#include <asm/mach/map.h>
-#include "common.h"
#include <video/omapdss.h>
#include <video/omap-panel-generic-dpi.h>
#include <video/omap-panel-tfp410.h>
diff --git a/arch/arm/mach-omap2/drm.c b/arch/arm/mach-omap2/drm.c
index 72e0f01b..49a7ffb 100644
--- a/arch/arm/mach-omap2/drm.c
+++ b/arch/arm/mach-omap2/drm.c
@@ -23,15 +23,20 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
+#include <linux/platform_data/omap_drm.h>
#include <plat/omap_device.h>
#include <plat/omap_hwmod.h>
+#include <plat/cpu.h>
#if defined(CONFIG_DRM_OMAP) || (CONFIG_DRM_OMAP_MODULE)
+static struct omap_drm_platform_data platform_data;
+
static struct platform_device omap_drm_device = {
.dev = {
.coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &platform_data,
},
.name = "omapdrm",
.id = 0,
@@ -52,6 +57,8 @@
oh->name);
}
+ platform_data.omaprev = GET_OMAP_REVISION();
+
return platform_device_register(&omap_drm_device);
}
diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c
index 0a43f31..7a05de7 100644
--- a/arch/arm/mach-shmobile/board-kzm9g.c
+++ b/arch/arm/mach-shmobile/board-kzm9g.c
@@ -548,7 +548,6 @@
/* I2C */
static struct pcf857x_platform_data pcf8575_pdata = {
.gpio_base = GPIO_PCF8575_BASE,
- .irq = intcs_evt2irq(0x3260), /* IRQ19 */
};
static struct i2c_board_info i2c0_devices[] = {
@@ -570,6 +569,7 @@
static struct i2c_board_info i2c3_devices[] = {
{
I2C_BOARD_INFO("pcf8575", 0x20),
+ .irq = intcs_evt2irq(0x3260), /* IRQ19 */
.platform_data = &pcf8575_pdata,
},
};
diff --git a/arch/arm/mm/mmap.c b/arch/arm/mm/mmap.c
index 2065b60..10062ce 100644
--- a/arch/arm/mm/mmap.c
+++ b/arch/arm/mm/mmap.c
@@ -193,7 +193,7 @@
* You really shouldn't be using read() or write() on /dev/mem. This
* might go away in the future.
*/
-int valid_phys_addr_range(unsigned long addr, size_t size)
+int valid_phys_addr_range(phys_addr_t addr, size_t size)
{
if (addr < PHYS_OFFSET)
return 0;
diff --git a/arch/arm/plat-omap/include/plat/serial.h b/arch/arm/plat-omap/include/plat/serial.h
index 65fce44..b780470 100644
--- a/arch/arm/plat-omap/include/plat/serial.h
+++ b/arch/arm/plat-omap/include/plat/serial.h
@@ -109,15 +109,6 @@
#define OMAP5UART4 OMAP4UART4
#define ZOOM_UART 95 /* Only on zoom2/3 */
-/* This is only used by 8250.c for omap1510 */
-#define is_omap_port(pt) ({int __ret = 0; \
- if ((pt)->port.mapbase == OMAP1_UART1_BASE || \
- (pt)->port.mapbase == OMAP1_UART2_BASE || \
- (pt)->port.mapbase == OMAP1_UART3_BASE) \
- __ret = 1; \
- __ret; \
- })
-
#ifndef __ASSEMBLER__
struct omap_board_data;
diff --git a/arch/arm/plat-spear/Kconfig b/arch/arm/plat-spear/Kconfig
index f8db7b2..87dbd81 100644
--- a/arch/arm/plat-spear/Kconfig
+++ b/arch/arm/plat-spear/Kconfig
@@ -12,6 +12,7 @@
bool "ST SPEAr13xx with Device Tree"
select ARM_GIC
select CPU_V7
+ select GPIO_SPEAR_SPICS
select HAVE_SMP
select MIGHT_HAVE_CACHE_L2X0
select PINCTRL
diff --git a/arch/avr32/configs/atngw100_defconfig b/arch/avr32/configs/atngw100_defconfig
index a06bfcc..f4025db 100644
--- a/arch/avr32/configs/atngw100_defconfig
+++ b/arch/avr32/configs/atngw100_defconfig
@@ -109,7 +109,7 @@
CONFIG_USB_ZERO=m
CONFIG_USB_ETH=m
CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
+CONFIG_USB_MASS_STORAGE=m
CONFIG_USB_G_SERIAL=m
CONFIG_USB_CDC_COMPOSITE=m
CONFIG_MMC=y
diff --git a/arch/avr32/configs/atngw100_evklcd100_defconfig b/arch/avr32/configs/atngw100_evklcd100_defconfig
index d8f1fe8..c76a49b 100644
--- a/arch/avr32/configs/atngw100_evklcd100_defconfig
+++ b/arch/avr32/configs/atngw100_evklcd100_defconfig
@@ -125,7 +125,7 @@
CONFIG_USB_ZERO=m
CONFIG_USB_ETH=m
CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
+CONFIG_USB_MASS_STORAGE=m
CONFIG_USB_G_SERIAL=m
CONFIG_USB_CDC_COMPOSITE=m
CONFIG_MMC=y
diff --git a/arch/avr32/configs/atngw100_evklcd101_defconfig b/arch/avr32/configs/atngw100_evklcd101_defconfig
index d4c5b19..2d8ab08 100644
--- a/arch/avr32/configs/atngw100_evklcd101_defconfig
+++ b/arch/avr32/configs/atngw100_evklcd101_defconfig
@@ -124,7 +124,7 @@
CONFIG_USB_ZERO=m
CONFIG_USB_ETH=m
CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
+CONFIG_USB_MASS_STORAGE=m
CONFIG_USB_G_SERIAL=m
CONFIG_USB_CDC_COMPOSITE=m
CONFIG_MMC=y
diff --git a/arch/avr32/configs/atngw100_mrmt_defconfig b/arch/avr32/configs/atngw100_mrmt_defconfig
index 77ca4f9..b189e0c 100644
--- a/arch/avr32/configs/atngw100_mrmt_defconfig
+++ b/arch/avr32/configs/atngw100_mrmt_defconfig
@@ -99,7 +99,7 @@
# CONFIG_SND_SPI is not set
CONFIG_USB_GADGET=m
CONFIG_USB_GADGET_DEBUG_FILES=y
-CONFIG_USB_FILE_STORAGE=m
+CONFIG_USB_MASS_STORAGE=m
CONFIG_USB_G_SERIAL=m
CONFIG_MMC=y
CONFIG_MMC_ATMELMCI=y
diff --git a/arch/avr32/configs/atngw100mkii_defconfig b/arch/avr32/configs/atngw100mkii_defconfig
index 6e0dca4..2e4de42 100644
--- a/arch/avr32/configs/atngw100mkii_defconfig
+++ b/arch/avr32/configs/atngw100mkii_defconfig
@@ -111,7 +111,7 @@
CONFIG_USB_ZERO=m
CONFIG_USB_ETH=m
CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
+CONFIG_USB_MASS_STORAGE=m
CONFIG_USB_G_SERIAL=m
CONFIG_USB_CDC_COMPOSITE=m
CONFIG_MMC=y
diff --git a/arch/avr32/configs/atngw100mkii_evklcd100_defconfig b/arch/avr32/configs/atngw100mkii_evklcd100_defconfig
index 7f2a344..fad3cd2 100644
--- a/arch/avr32/configs/atngw100mkii_evklcd100_defconfig
+++ b/arch/avr32/configs/atngw100mkii_evklcd100_defconfig
@@ -128,7 +128,7 @@
CONFIG_USB_ZERO=m
CONFIG_USB_ETH=m
CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
+CONFIG_USB_MASS_STORAGE=m
CONFIG_USB_G_SERIAL=m
CONFIG_USB_CDC_COMPOSITE=m
CONFIG_MMC=y
diff --git a/arch/avr32/configs/atngw100mkii_evklcd101_defconfig b/arch/avr32/configs/atngw100mkii_evklcd101_defconfig
index 085eeba..2998623 100644
--- a/arch/avr32/configs/atngw100mkii_evklcd101_defconfig
+++ b/arch/avr32/configs/atngw100mkii_evklcd101_defconfig
@@ -127,7 +127,7 @@
CONFIG_USB_ZERO=m
CONFIG_USB_ETH=m
CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
+CONFIG_USB_MASS_STORAGE=m
CONFIG_USB_G_SERIAL=m
CONFIG_USB_CDC_COMPOSITE=m
CONFIG_MMC=y
diff --git a/arch/avr32/configs/atstk1002_defconfig b/arch/avr32/configs/atstk1002_defconfig
index d1a887e..a582465 100644
--- a/arch/avr32/configs/atstk1002_defconfig
+++ b/arch/avr32/configs/atstk1002_defconfig
@@ -126,7 +126,7 @@
CONFIG_USB_ZERO=m
CONFIG_USB_ETH=m
CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
+CONFIG_USB_MASS_STORAGE=m
CONFIG_USB_G_SERIAL=m
CONFIG_USB_CDC_COMPOSITE=m
CONFIG_MMC=y
diff --git a/arch/avr32/configs/atstk1003_defconfig b/arch/avr32/configs/atstk1003_defconfig
index 956f281..57a79df 100644
--- a/arch/avr32/configs/atstk1003_defconfig
+++ b/arch/avr32/configs/atstk1003_defconfig
@@ -105,7 +105,7 @@
CONFIG_USB_ZERO=m
CONFIG_USB_ETH=m
CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
+CONFIG_USB_MASS_STORAGE=m
CONFIG_USB_G_SERIAL=m
CONFIG_USB_CDC_COMPOSITE=m
CONFIG_MMC=y
diff --git a/arch/avr32/configs/atstk1004_defconfig b/arch/avr32/configs/atstk1004_defconfig
index 40c69f3..1a49bd8 100644
--- a/arch/avr32/configs/atstk1004_defconfig
+++ b/arch/avr32/configs/atstk1004_defconfig
@@ -104,7 +104,7 @@
CONFIG_USB_ZERO=m
CONFIG_USB_ETH=m
CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
+CONFIG_USB_MASS_STORAGE=m
CONFIG_USB_G_SERIAL=m
CONFIG_USB_CDC_COMPOSITE=m
CONFIG_MMC=y
diff --git a/arch/avr32/configs/atstk1006_defconfig b/arch/avr32/configs/atstk1006_defconfig
index 511eb8a..206a1b6 100644
--- a/arch/avr32/configs/atstk1006_defconfig
+++ b/arch/avr32/configs/atstk1006_defconfig
@@ -129,7 +129,7 @@
CONFIG_USB_ZERO=m
CONFIG_USB_ETH=m
CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
+CONFIG_USB_MASS_STORAGE=m
CONFIG_USB_G_SERIAL=m
CONFIG_USB_CDC_COMPOSITE=m
CONFIG_MMC=y
diff --git a/arch/avr32/configs/favr-32_defconfig b/arch/avr32/configs/favr-32_defconfig
index 19973b0..0421498 100644
--- a/arch/avr32/configs/favr-32_defconfig
+++ b/arch/avr32/configs/favr-32_defconfig
@@ -117,7 +117,7 @@
CONFIG_USB_ZERO=m
CONFIG_USB_ETH=m
CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
+CONFIG_USB_MASS_STORAGE=m
CONFIG_USB_G_SERIAL=m
CONFIG_USB_CDC_COMPOSITE=m
CONFIG_MMC=y
diff --git a/arch/avr32/configs/hammerhead_defconfig b/arch/avr32/configs/hammerhead_defconfig
index 6f45681..82f24eb 100644
--- a/arch/avr32/configs/hammerhead_defconfig
+++ b/arch/avr32/configs/hammerhead_defconfig
@@ -127,7 +127,7 @@
CONFIG_USB_ZERO=m
CONFIG_USB_ETH=m
CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
+CONFIG_USB_MASS_STORAGE=m
CONFIG_USB_G_SERIAL=m
CONFIG_MMC=m
CONFIG_MMC_ATMELMCI=m
diff --git a/arch/blackfin/configs/CM-BF527_defconfig b/arch/blackfin/configs/CM-BF527_defconfig
index c280a50..f59c80e 100644
--- a/arch/blackfin/configs/CM-BF527_defconfig
+++ b/arch/blackfin/configs/CM-BF527_defconfig
@@ -106,7 +106,7 @@
CONFIG_USB_STORAGE=m
CONFIG_USB_GADGET=m
CONFIG_USB_ETH=m
-CONFIG_USB_FILE_STORAGE=m
+CONFIG_USB_MASS_STORAGE=m
CONFIG_USB_G_SERIAL=m
CONFIG_USB_G_PRINTER=m
CONFIG_RTC_CLASS=y
diff --git a/arch/blackfin/configs/CM-BF548_defconfig b/arch/blackfin/configs/CM-BF548_defconfig
index 349922b..e961483 100644
--- a/arch/blackfin/configs/CM-BF548_defconfig
+++ b/arch/blackfin/configs/CM-BF548_defconfig
@@ -107,7 +107,7 @@
CONFIG_USB_ETH=m
# CONFIG_USB_ETH_RNDIS is not set
CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
+CONFIG_USB_MASS_STORAGE=m
CONFIG_USB_G_SERIAL=m
CONFIG_USB_G_PRINTER=m
CONFIG_MMC=m
diff --git a/arch/blackfin/configs/CM-BF561_defconfig b/arch/blackfin/configs/CM-BF561_defconfig
index 0456dea..24936b9 100644
--- a/arch/blackfin/configs/CM-BF561_defconfig
+++ b/arch/blackfin/configs/CM-BF561_defconfig
@@ -83,7 +83,7 @@
CONFIG_GPIO_SYSFS=y
CONFIG_USB_GADGET=m
CONFIG_USB_ETH=m
-CONFIG_USB_FILE_STORAGE=m
+CONFIG_USB_MASS_STORAGE=m
CONFIG_USB_G_SERIAL=m
CONFIG_USB_G_PRINTER=m
CONFIG_MMC=y
diff --git a/arch/ia64/hp/sim/simserial.c b/arch/ia64/hp/sim/simserial.c
index ec536e4..fc3924d 100644
--- a/arch/ia64/hp/sim/simserial.c
+++ b/arch/ia64/hp/sim/simserial.c
@@ -555,6 +555,7 @@
return 0;
err_free_tty:
put_tty_driver(hp_simserial_driver);
+ tty_port_destroy(&state->port);
return retval;
}
diff --git a/arch/ia64/include/asm/device.h b/arch/ia64/include/asm/device.h
index d05e78f..f69c32f 100644
--- a/arch/ia64/include/asm/device.h
+++ b/arch/ia64/include/asm/device.h
@@ -7,9 +7,6 @@
#define _ASM_IA64_DEVICE_H
struct dev_archdata {
-#ifdef CONFIG_ACPI
- void *acpi_handle;
-#endif
#ifdef CONFIG_INTEL_IOMMU
void *iommu; /* hook for IOMMU specific extension */
#endif
diff --git a/arch/ia64/include/asm/io.h b/arch/ia64/include/asm/io.h
index 2c26321..74a7cc3 100644
--- a/arch/ia64/include/asm/io.h
+++ b/arch/ia64/include/asm/io.h
@@ -90,7 +90,7 @@
#define ARCH_HAS_VALID_PHYS_ADDR_RANGE
extern u64 kern_mem_attribute (unsigned long phys_addr, unsigned long size);
-extern int valid_phys_addr_range (unsigned long addr, size_t count); /* efi.c */
+extern int valid_phys_addr_range (phys_addr_t addr, size_t count); /* efi.c */
extern int valid_mmap_phys_addr_range (unsigned long pfn, size_t count);
/*
diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c
index 44057885..e9682f5 100644
--- a/arch/ia64/kernel/acpi.c
+++ b/arch/ia64/kernel/acpi.c
@@ -633,6 +633,7 @@
ACPI_EDGE_SENSITIVE) ? IOSAPIC_EDGE :
IOSAPIC_LEVEL);
}
+EXPORT_SYMBOL_GPL(acpi_register_gsi);
void acpi_unregister_gsi(u32 gsi)
{
@@ -644,6 +645,7 @@
iosapic_unregister_intr(gsi);
}
+EXPORT_SYMBOL_GPL(acpi_unregister_gsi);
static int __init acpi_parse_fadt(struct acpi_table_header *table)
{
diff --git a/arch/ia64/kernel/efi.c b/arch/ia64/kernel/efi.c
index d37bbd4..f034563 100644
--- a/arch/ia64/kernel/efi.c
+++ b/arch/ia64/kernel/efi.c
@@ -870,7 +870,7 @@
EXPORT_SYMBOL(kern_mem_attribute);
int
-valid_phys_addr_range (unsigned long phys_addr, unsigned long size)
+valid_phys_addr_range (phys_addr_t phys_addr, unsigned long size)
{
u64 attr;
diff --git a/arch/m68k/emu/nfcon.c b/arch/m68k/emu/nfcon.c
index 16d170f..6685bf4 100644
--- a/arch/m68k/emu/nfcon.c
+++ b/arch/m68k/emu/nfcon.c
@@ -120,8 +120,6 @@
{
int res;
- tty_port_init(&nfcon_tty_port);
-
stderr_id = nf_get_id("NF_STDERR");
if (!stderr_id)
return -ENODEV;
@@ -130,6 +128,8 @@
if (!nfcon_tty_driver)
return -ENOMEM;
+ tty_port_init(&nfcon_tty_port);
+
nfcon_tty_driver->driver_name = "nfcon";
nfcon_tty_driver->name = "nfcon";
nfcon_tty_driver->type = TTY_DRIVER_TYPE_SYSTEM;
@@ -143,6 +143,7 @@
if (res) {
pr_err("failed to register nfcon tty driver\n");
put_tty_driver(nfcon_tty_driver);
+ tty_port_destroy(&nfcon_tty_port);
return res;
}
@@ -157,6 +158,7 @@
unregister_console(&nf_console);
tty_unregister_driver(nfcon_tty_driver);
put_tty_driver(nfcon_tty_driver);
+ tty_port_destroy(&nfcon_tty_port);
}
module_init(nfcon_init);
diff --git a/arch/microblaze/pci/pci-common.c b/arch/microblaze/pci/pci-common.c
index 4dbb505..a1c5b99 100644
--- a/arch/microblaze/pci/pci-common.c
+++ b/arch/microblaze/pci/pci-common.c
@@ -1346,8 +1346,6 @@
pci_assign_unassigned_resources();
}
-#ifdef CONFIG_HOTPLUG
-
/* This is used by the PCI hotplug driver to allocate resource
* of newly plugged busses. We can try to consolidate with the
* rest of the code later, for now, keep it as-is as our main
@@ -1407,8 +1405,6 @@
}
EXPORT_SYMBOL_GPL(pcibios_finish_adding_to_bus);
-#endif /* CONFIG_HOTPLUG */
-
int pcibios_enable_device(struct pci_dev *dev, int mask)
{
return pci_enable_resources(dev, mask);
diff --git a/arch/mips/alchemy/common/Makefile b/arch/mips/alchemy/common/Makefile
index 407ebc0..cb83d8d 100644
--- a/arch/mips/alchemy/common/Makefile
+++ b/arch/mips/alchemy/common/Makefile
@@ -6,7 +6,7 @@
#
obj-y += prom.o time.o clocks.o platform.o power.o setup.o \
- sleeper.o dma.o dbdma.o vss.o irq.o
+ sleeper.o dma.o dbdma.o vss.o irq.o usb.o
# optional gpiolib support
ifeq ($(CONFIG_ALCHEMY_GPIO_INDIRECT),)
diff --git a/arch/mips/alchemy/common/platform.c b/arch/mips/alchemy/common/platform.c
index c0f3ce6..7af941d 100644
--- a/arch/mips/alchemy/common/platform.c
+++ b/arch/mips/alchemy/common/platform.c
@@ -17,6 +17,8 @@
#include <linux/platform_device.h>
#include <linux/serial_8250.h>
#include <linux/slab.h>
+#include <linux/usb/ehci_pdriver.h>
+#include <linux/usb/ohci_pdriver.h>
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-au1x00/au1xxx_dbdma.h>
@@ -122,6 +124,53 @@
static u64 alchemy_ohci_dmamask = DMA_BIT_MASK(32);
static u64 __maybe_unused alchemy_ehci_dmamask = DMA_BIT_MASK(32);
+/* Power on callback for the ehci platform driver */
+static int alchemy_ehci_power_on(struct platform_device *pdev)
+{
+ return alchemy_usb_control(ALCHEMY_USB_EHCI0, 1);
+}
+
+/* Power off/suspend callback for the ehci platform driver */
+static void alchemy_ehci_power_off(struct platform_device *pdev)
+{
+ alchemy_usb_control(ALCHEMY_USB_EHCI0, 0);
+}
+
+static struct usb_ehci_pdata alchemy_ehci_pdata = {
+ .no_io_watchdog = 1,
+ .power_on = alchemy_ehci_power_on,
+ .power_off = alchemy_ehci_power_off,
+ .power_suspend = alchemy_ehci_power_off,
+};
+
+/* Power on callback for the ohci platform driver */
+static int alchemy_ohci_power_on(struct platform_device *pdev)
+{
+ int unit;
+
+ unit = (pdev->id == 1) ?
+ ALCHEMY_USB_OHCI1 : ALCHEMY_USB_OHCI0;
+
+ return alchemy_usb_control(unit, 1);
+}
+
+/* Power off/suspend callback for the ohci platform driver */
+static void alchemy_ohci_power_off(struct platform_device *pdev)
+{
+ int unit;
+
+ unit = (pdev->id == 1) ?
+ ALCHEMY_USB_OHCI1 : ALCHEMY_USB_OHCI0;
+
+ alchemy_usb_control(unit, 0);
+}
+
+static struct usb_ohci_pdata alchemy_ohci_pdata = {
+ .power_on = alchemy_ohci_power_on,
+ .power_off = alchemy_ohci_power_off,
+ .power_suspend = alchemy_ohci_power_off,
+};
+
static unsigned long alchemy_ohci_data[][2] __initdata = {
[ALCHEMY_CPU_AU1000] = { AU1000_USB_OHCI_PHYS_ADDR, AU1000_USB_HOST_INT },
[ALCHEMY_CPU_AU1500] = { AU1000_USB_OHCI_PHYS_ADDR, AU1500_USB_HOST_INT },
@@ -169,9 +218,10 @@
res[1].start = alchemy_ohci_data[ctype][1];
res[1].end = res[1].start;
res[1].flags = IORESOURCE_IRQ;
- pdev->name = "au1xxx-ohci";
+ pdev->name = "ohci-platform";
pdev->id = 0;
pdev->dev.dma_mask = &alchemy_ohci_dmamask;
+ pdev->dev.platform_data = &alchemy_ohci_pdata;
if (platform_device_register(pdev))
printk(KERN_INFO "Alchemy USB: cannot add OHCI0\n");
@@ -188,9 +238,10 @@
res[1].start = alchemy_ehci_data[ctype][1];
res[1].end = res[1].start;
res[1].flags = IORESOURCE_IRQ;
- pdev->name = "au1xxx-ehci";
+ pdev->name = "ehci-platform";
pdev->id = 0;
pdev->dev.dma_mask = &alchemy_ehci_dmamask;
+ pdev->dev.platform_data = &alchemy_ehci_pdata;
if (platform_device_register(pdev))
printk(KERN_INFO "Alchemy USB: cannot add EHCI0\n");
@@ -207,9 +258,10 @@
res[1].start = AU1300_USB_INT;
res[1].end = res[1].start;
res[1].flags = IORESOURCE_IRQ;
- pdev->name = "au1xxx-ohci";
+ pdev->name = "ohci-platform";
pdev->id = 1;
pdev->dev.dma_mask = &alchemy_ohci_dmamask;
+ pdev->dev.platform_data = &alchemy_ohci_pdata;
if (platform_device_register(pdev))
printk(KERN_INFO "Alchemy USB: cannot add OHCI1\n");
diff --git a/drivers/usb/host/alchemy-common.c b/arch/mips/alchemy/common/usb.c
similarity index 100%
rename from drivers/usb/host/alchemy-common.c
rename to arch/mips/alchemy/common/usb.c
diff --git a/arch/mips/ath79/dev-usb.c b/arch/mips/ath79/dev-usb.c
index 072bb9b..bd2bc10 100644
--- a/arch/mips/ath79/dev-usb.c
+++ b/arch/mips/ath79/dev-usb.c
@@ -50,13 +50,11 @@
static struct usb_ehci_pdata ath79_ehci_pdata_v1 = {
.has_synopsys_hc_bug = 1,
- .port_power_off = 1,
};
static struct usb_ehci_pdata ath79_ehci_pdata_v2 = {
.caps_offset = 0x100,
.has_tt = 1,
- .port_power_off = 1,
};
static struct platform_device ath79_ehci_device = {
diff --git a/arch/mips/configs/bcm47xx_defconfig b/arch/mips/configs/bcm47xx_defconfig
index b6fde2b..4ca8e5c 100644
--- a/arch/mips/configs/bcm47xx_defconfig
+++ b/arch/mips/configs/bcm47xx_defconfig
@@ -473,7 +473,7 @@
CONFIG_USB_ZERO=m
CONFIG_USB_ETH=m
CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
+CONFIG_USB_MASS_STORAGE=m
CONFIG_USB_G_SERIAL=m
CONFIG_USB_MIDI_GADGET=m
CONFIG_LEDS_CLASS=y
diff --git a/arch/mips/configs/db1000_defconfig b/arch/mips/configs/db1000_defconfig
index 17a36c1..face9d2 100644
--- a/arch/mips/configs/db1000_defconfig
+++ b/arch/mips/configs/db1000_defconfig
@@ -233,6 +233,7 @@
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PLATFORM=y
CONFIG_USB_UHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_NEW_LEDS=y
diff --git a/arch/mips/configs/db1235_defconfig b/arch/mips/configs/db1235_defconfig
index c48998f..14752dd 100644
--- a/arch/mips/configs/db1235_defconfig
+++ b/arch/mips/configs/db1235_defconfig
@@ -346,8 +346,10 @@
CONFIG_USB_DYNAMIC_MINORS=y
CONFIG_USB_SUSPEND=y
CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_HCD_PLATFORM=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PLATFORM=y
CONFIG_USB_STORAGE=y
CONFIG_MMC=y
CONFIG_MMC_CLKGATE=y
diff --git a/arch/mips/configs/gpr_defconfig b/arch/mips/configs/gpr_defconfig
index 48a40ae..fb64589 100644
--- a/arch/mips/configs/gpr_defconfig
+++ b/arch/mips/configs/gpr_defconfig
@@ -291,6 +291,7 @@
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PLATFORM=y
CONFIG_USB_STORAGE=m
CONFIG_USB_LIBUSUAL=y
CONFIG_USB_SERIAL=y
diff --git a/arch/mips/configs/ls1b_defconfig b/arch/mips/configs/ls1b_defconfig
index 80cff8b..7eb7554 100644
--- a/arch/mips/configs/ls1b_defconfig
+++ b/arch/mips/configs/ls1b_defconfig
@@ -76,6 +76,7 @@
CONFIG_USB=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_HCD_PLATFORM=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_STORAGE=m
CONFIG_USB_SERIAL=m
diff --git a/arch/mips/configs/mtx1_defconfig b/arch/mips/configs/mtx1_defconfig
index 46c61edc..9fa8f16 100644
--- a/arch/mips/configs/mtx1_defconfig
+++ b/arch/mips/configs/mtx1_defconfig
@@ -581,6 +581,7 @@
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_OHCI_HCD=m
+CONFIG_USB_OHCI_HCD_PLATFORM=y
CONFIG_USB_UHCI_HCD=m
CONFIG_USB_U132_HCD=m
CONFIG_USB_SL811_HCD=m
@@ -661,7 +662,7 @@
CONFIG_USB_ZERO=m
CONFIG_USB_ETH=m
CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
+CONFIG_USB_MASS_STORAGE=m
CONFIG_USB_G_SERIAL=m
CONFIG_USB_MIDI_GADGET=m
CONFIG_MMC=m
diff --git a/arch/mips/include/uapi/asm/ioctls.h b/arch/mips/include/uapi/asm/ioctls.h
index 92403c3..addd56b 100644
--- a/arch/mips/include/uapi/asm/ioctls.h
+++ b/arch/mips/include/uapi/asm/ioctls.h
@@ -86,6 +86,9 @@
#define TIOCGDEV _IOR('T', 0x32, unsigned int) /* Get primary device node of /dev/console */
#define TIOCSIG _IOW('T', 0x36, int) /* Generate signal on Pty slave */
#define TIOCVHANGUP 0x5437
+#define TIOCGPKT _IOR('T', 0x38, int) /* Get packet mode state */
+#define TIOCGPTLCK _IOR('T', 0x39, int) /* Get Pty lock state */
+#define TIOCGEXCL _IOR('T', 0x40, int) /* Get exclusive mode state */
/* I hope the range from 0x5480 on is free ... */
#define TIOCSCTTY 0x5480 /* become controlling tty */
diff --git a/arch/mips/loongson1/common/platform.c b/arch/mips/loongson1/common/platform.c
index e92d59c..0412ad6 100644
--- a/arch/mips/loongson1/common/platform.c
+++ b/arch/mips/loongson1/common/platform.c
@@ -13,6 +13,7 @@
#include <linux/phy.h>
#include <linux/serial_8250.h>
#include <linux/stmmac.h>
+#include <linux/usb/ehci_pdriver.h>
#include <asm-generic/sizes.h>
#include <loongson1.h>
@@ -107,13 +108,17 @@
},
};
+static struct usb_ehci_pdata ls1x_ehci_pdata = {
+};
+
struct platform_device ls1x_ehci_device = {
- .name = "ls1x-ehci",
+ .name = "ehci-platform",
.id = -1,
.num_resources = ARRAY_SIZE(ls1x_ehci_resources),
.resource = ls1x_ehci_resources,
.dev = {
.dma_mask = &ls1x_ehci_dmamask,
+ .platform_data = &ls1x_ehci_pdata,
},
};
diff --git a/arch/mips/netlogic/xlr/platform.c b/arch/mips/netlogic/xlr/platform.c
index 71b44d8..507230e 100644
--- a/arch/mips/netlogic/xlr/platform.c
+++ b/arch/mips/netlogic/xlr/platform.c
@@ -15,6 +15,8 @@
#include <linux/serial_8250.h>
#include <linux/serial_reg.h>
#include <linux/i2c.h>
+#include <linux/usb/ehci_pdriver.h>
+#include <linux/usb/ohci_pdriver.h>
#include <asm/netlogic/haldefs.h>
#include <asm/netlogic/xlr/iomap.h>
@@ -123,12 +125,18 @@
}, \
}
+static struct usb_ehci_pdata xls_usb_ehci_pdata = {
+ .caps_offset = 0,
+};
+
+static struct usb_ohci_pdata xls_usb_ohci_pdata;
+
static struct platform_device xls_usb_ehci_device =
- USB_PLATFORM_DEV("ehci-xls", 0, PIC_USB_IRQ);
+ USB_PLATFORM_DEV("ehci-platform", 0, PIC_USB_IRQ);
static struct platform_device xls_usb_ohci_device_0 =
- USB_PLATFORM_DEV("ohci-xls-0", 1, PIC_USB_IRQ);
+ USB_PLATFORM_DEV("ohci-platform", 1, PIC_USB_IRQ);
static struct platform_device xls_usb_ohci_device_1 =
- USB_PLATFORM_DEV("ohci-xls-1", 2, PIC_USB_IRQ);
+ USB_PLATFORM_DEV("ohci-platform", 2, PIC_USB_IRQ);
static struct platform_device *xls_platform_devices[] = {
&xls_usb_ehci_device,
@@ -172,14 +180,17 @@
memres = CPHYSADDR((unsigned long)usb_mmio);
xls_usb_ehci_device.resource[0].start = memres;
xls_usb_ehci_device.resource[0].end = memres + 0x400 - 1;
+ xls_usb_ehci_device.dev.platform_data = &xls_usb_ehci_pdata;
memres += 0x400;
xls_usb_ohci_device_0.resource[0].start = memres;
xls_usb_ohci_device_0.resource[0].end = memres + 0x400 - 1;
+ xls_usb_ohci_device_0.dev.platform_data = &xls_usb_ohci_pdata;
memres += 0x400;
xls_usb_ohci_device_1.resource[0].start = memres;
xls_usb_ohci_device_1.resource[0].end = memres + 0x400 - 1;
+ xls_usb_ohci_device_1.dev.platform_data = &xls_usb_ohci_pdata;
return platform_add_devices(xls_platform_devices,
ARRAY_SIZE(xls_platform_devices));
diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c
index 04e35bc..4040416 100644
--- a/arch/mips/pci/pci.c
+++ b/arch/mips/pci/pci.c
@@ -313,10 +313,8 @@
}
}
-#ifdef CONFIG_HOTPLUG
EXPORT_SYMBOL(PCIBIOS_MIN_IO);
EXPORT_SYMBOL(PCIBIOS_MIN_MEM);
-#endif
int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
enum pci_mmap_state mmap_state, int write_combine)
diff --git a/arch/mips/pnx8550/common/platform.c b/arch/mips/pnx8550/common/platform.c
index 5264cc0..0a8faea 100644
--- a/arch/mips/pnx8550/common/platform.c
+++ b/arch/mips/pnx8550/common/platform.c
@@ -20,6 +20,7 @@
#include <linux/serial.h>
#include <linux/serial_pnx8xxx.h>
#include <linux/platform_device.h>
+#include <linux/usb/ohci_pdriver.h>
#include <int.h>
#include <usb.h>
@@ -96,12 +97,40 @@
static u64 uart_dmamask = DMA_BIT_MASK(32);
+static int pnx8550_usb_ohci_power_on(struct platform_device *pdev)
+{
+ /*
+ * Set register CLK48CTL to enable and 48MHz
+ */
+ outl(0x00000003, PCI_BASE | 0x0004770c);
+
+ /*
+ * Set register CLK12CTL to enable and 48MHz
+ */
+ outl(0x00000003, PCI_BASE | 0x00047710);
+
+ udelay(100);
+
+ return 0;
+}
+
+static void pnx8550_usb_ohci_power_off(struct platform_device *pdev)
+{
+ udelay(10);
+}
+
+static struct usb_ohci_pdata pnx8550_usb_ohci_pdata = {
+ .power_on = pnx8550_usb_ohci_power_on,
+ .power_off = pnx8550_usb_ohci_power_off,
+};
+
static struct platform_device pnx8550_usb_ohci_device = {
- .name = "pnx8550-ohci",
+ .name = "ohci-platform",
.id = -1,
.dev = {
.dma_mask = &ohci_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &pnx8550_usb_ohci_pdata,
},
.num_resources = ARRAY_SIZE(pnx8550_usb_ohci_resources),
.resource = pnx8550_usb_ohci_resources,
diff --git a/arch/parisc/include/uapi/asm/ioctls.h b/arch/parisc/include/uapi/asm/ioctls.h
index 054ec06..66719c3 100644
--- a/arch/parisc/include/uapi/asm/ioctls.h
+++ b/arch/parisc/include/uapi/asm/ioctls.h
@@ -55,6 +55,9 @@
#define TIOCGDEV _IOR('T',0x32, int) /* Get primary device node of /dev/console */
#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */
#define TIOCVHANGUP 0x5437
+#define TIOCGPKT _IOR('T', 0x38, int) /* Get packet mode state */
+#define TIOCGPTLCK _IOR('T', 0x39, int) /* Get Pty lock state */
+#define TIOCGEXCL _IOR('T', 0x40, int) /* Get exclusive mode state */
#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */
#define FIOCLEX 0x5451
diff --git a/arch/parisc/kernel/pdc_cons.c b/arch/parisc/kernel/pdc_cons.c
index 8823863..efc5e7d 100644
--- a/arch/parisc/kernel/pdc_cons.c
+++ b/arch/parisc/kernel/pdc_cons.c
@@ -186,13 +186,13 @@
printk(KERN_INFO "The PDC console driver is still registered, removing CON_BOOT flag\n");
pdc_cons.flags &= ~CON_BOOT;
- tty_port_init(&tty_port);
-
pdc_console_tty_driver = alloc_tty_driver(1);
if (!pdc_console_tty_driver)
return -ENOMEM;
+ tty_port_init(&tty_port);
+
pdc_console_tty_driver->driver_name = "pdc_cons";
pdc_console_tty_driver->name = "ttyB";
pdc_console_tty_driver->major = MUX_MAJOR;
@@ -207,6 +207,7 @@
err = tty_register_driver(pdc_console_tty_driver);
if (err) {
printk(KERN_ERR "Unable to register the PDC console TTY driver\n");
+ tty_port_destroy(&tty_port);
return err;
}
diff --git a/arch/powerpc/include/uapi/asm/ioctls.h b/arch/powerpc/include/uapi/asm/ioctls.h
index e9b7887..49a2579 100644
--- a/arch/powerpc/include/uapi/asm/ioctls.h
+++ b/arch/powerpc/include/uapi/asm/ioctls.h
@@ -97,6 +97,9 @@
#define TIOCGDEV _IOR('T',0x32, unsigned int) /* Get primary device node of /dev/console */
#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */
#define TIOCVHANGUP 0x5437
+#define TIOCGPKT _IOR('T', 0x38, int) /* Get packet mode state */
+#define TIOCGPTLCK _IOR('T', 0x39, int) /* Get Pty lock state */
+#define TIOCGEXCL _IOR('T', 0x40, int) /* Get exclusive mode state */
#define TIOCSERCONFIG 0x5453
#define TIOCSERGWILD 0x5454
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index 7f94f76..abc0d08 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -1428,8 +1428,6 @@
ppc_md.pcibios_fixup();
}
-#ifdef CONFIG_HOTPLUG
-
/* This is used by the PCI hotplug driver to allocate resource
* of newly plugged busses. We can try to consolidate with the
* rest of the code later, for now, keep it as-is as our main
@@ -1488,8 +1486,6 @@
}
EXPORT_SYMBOL_GPL(pcibios_finish_adding_to_bus);
-#endif /* CONFIG_HOTPLUG */
-
int pcibios_enable_device(struct pci_dev *dev, int mask)
{
if (ppc_md.pcibios_enable_device_hook)
diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c
index 4ff190f..2cbe676 100644
--- a/arch/powerpc/kernel/pci_64.c
+++ b/arch/powerpc/kernel/pci_64.c
@@ -74,8 +74,6 @@
subsys_initcall(pcibios_init);
-#ifdef CONFIG_HOTPLUG
-
int pcibios_unmap_io_space(struct pci_bus *bus)
{
struct pci_controller *hose;
@@ -124,8 +122,6 @@
}
EXPORT_SYMBOL_GPL(pcibios_unmap_io_space);
-#endif /* CONFIG_HOTPLUG */
-
static int __devinit pcibios_map_phb_io_space(struct pci_controller *hose)
{
struct vm_struct *area;
diff --git a/arch/powerpc/platforms/pseries/processor_idle.c b/arch/powerpc/platforms/pseries/processor_idle.c
index 45d00e5..4d806b4 100644
--- a/arch/powerpc/platforms/pseries/processor_idle.c
+++ b/arch/powerpc/platforms/pseries/processor_idle.c
@@ -36,7 +36,7 @@
static inline void idle_loop_prolog(unsigned long *in_purr, ktime_t *kt_before)
{
- *kt_before = ktime_get_real();
+ *kt_before = ktime_get();
*in_purr = mfspr(SPRN_PURR);
/*
* Indicate to the HV that we are idle. Now would be
@@ -50,7 +50,7 @@
get_lppaca()->wait_state_cycles += mfspr(SPRN_PURR) - in_purr;
get_lppaca()->idle = 0;
- return ktime_to_us(ktime_sub(ktime_get_real(), kt_before));
+ return ktime_to_us(ktime_sub(ktime_get(), kt_before));
}
static int snooze_loop(struct cpuidle_device *dev,
diff --git a/arch/sh/configs/ecovec24_defconfig b/arch/sh/configs/ecovec24_defconfig
index 911e30c9..c6c2bec 100644
--- a/arch/sh/configs/ecovec24_defconfig
+++ b/arch/sh/configs/ecovec24_defconfig
@@ -112,7 +112,7 @@
CONFIG_USB_R8A66597_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
-CONFIG_USB_FILE_STORAGE=m
+CONFIG_USB_MASS_STORAGE=m
CONFIG_MMC=y
CONFIG_MMC_SPI=y
CONFIG_MMC_SDHI=y
diff --git a/arch/sh/configs/se7724_defconfig b/arch/sh/configs/se7724_defconfig
index ed35093..1faa788 100644
--- a/arch/sh/configs/se7724_defconfig
+++ b/arch/sh/configs/se7724_defconfig
@@ -109,7 +109,7 @@
CONFIG_USB_GADGET=y
CONFIG_USB_ETH=m
CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
+CONFIG_USB_MASS_STORAGE=m
CONFIG_USB_G_SERIAL=m
CONFIG_MMC=y
CONFIG_MMC_SPI=y
diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c
index a7e078f..81e5daf 100644
--- a/arch/sh/drivers/pci/pci.c
+++ b/arch/sh/drivers/pci/pci.c
@@ -319,7 +319,5 @@
#endif /* CONFIG_GENERIC_IOMAP */
-#ifdef CONFIG_HOTPLUG
EXPORT_SYMBOL(PCIBIOS_MIN_IO);
EXPORT_SYMBOL(PCIBIOS_MIN_MEM);
-#endif
diff --git a/arch/sh/include/asm/io.h b/arch/sh/include/asm/io.h
index 73a23f4..629db2a 100644
--- a/arch/sh/include/asm/io.h
+++ b/arch/sh/include/asm/io.h
@@ -382,7 +382,7 @@
#define xlate_dev_kmem_ptr(p) p
#define ARCH_HAS_VALID_PHYS_ADDR_RANGE
-int valid_phys_addr_range(unsigned long addr, size_t size);
+int valid_phys_addr_range(phys_addr_t addr, size_t size);
int valid_mmap_phys_addr_range(unsigned long pfn, size_t size);
#endif /* __KERNEL__ */
diff --git a/arch/sh/include/uapi/asm/ioctls.h b/arch/sh/include/uapi/asm/ioctls.h
index a6769f3..3422410 100644
--- a/arch/sh/include/uapi/asm/ioctls.h
+++ b/arch/sh/include/uapi/asm/ioctls.h
@@ -88,6 +88,9 @@
#define TIOCGDEV _IOR('T',0x32, unsigned int) /* Get primary device node of /dev/console */
#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */
#define TIOCVHANGUP _IO('T', 0x37)
+#define TIOCGPKT _IOR('T', 0x38, int) /* Get packet mode state */
+#define TIOCGPTLCK _IOR('T', 0x39, int) /* Get Pty lock state */
+#define TIOCGEXCL _IOR('T', 0x40, int) /* Get exclusive mode state */
#define TIOCSERCONFIG _IO('T', 83) /* 0x5453 */
#define TIOCSERGWILD _IOR('T', 84, int) /* 0x5454 */
diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7720.c b/arch/sh/kernel/cpu/sh3/setup-sh7720.c
index 0c2f1b2..42d991f 100644
--- a/arch/sh/kernel/cpu/sh3/setup-sh7720.c
+++ b/arch/sh/kernel/cpu/sh3/setup-sh7720.c
@@ -20,6 +20,7 @@
#include <linux/serial_sci.h>
#include <linux/sh_timer.h>
#include <linux/sh_intc.h>
+#include <linux/usb/ohci_pdriver.h>
#include <asm/rtc.h>
#include <cpu/serial.h>
@@ -103,12 +104,15 @@
static u64 usb_ohci_dma_mask = 0xffffffffUL;
+static struct usb_ohci_pdata usb_ohci_pdata;
+
static struct platform_device usb_ohci_device = {
- .name = "sh_ohci",
+ .name = "ohci-platform",
.id = -1,
.dev = {
.dma_mask = &usb_ohci_dma_mask,
.coherent_dma_mask = 0xffffffff,
+ .platform_data = &usb_ohci_pdata,
},
.num_resources = ARRAY_SIZE(usb_ohci_resources),
.resource = usb_ohci_resources,
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7757.c b/arch/sh/kernel/cpu/sh4a/setup-sh7757.c
index 4a2f357..9079a0f 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7757.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7757.c
@@ -19,6 +19,7 @@
#include <linux/sh_timer.h>
#include <linux/sh_dma.h>
#include <linux/sh_intc.h>
+#include <linux/usb/ohci_pdriver.h>
#include <cpu/dma-register.h>
#include <cpu/sh7757.h>
@@ -750,12 +751,15 @@
},
};
+static struct usb_ohci_pdata usb_ohci_pdata;
+
static struct platform_device usb_ohci_device = {
- .name = "sh_ohci",
+ .name = "ohci-platform",
.id = -1,
.dev = {
.dma_mask = &usb_ohci_device.dev.coherent_dma_mask,
.coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &usb_ohci_pdata,
},
.num_resources = ARRAY_SIZE(usb_ohci_resources),
.resource = usb_ohci_resources,
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c
index bd0a8fb..1686aca 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c
@@ -16,6 +16,7 @@
#include <linux/sh_intc.h>
#include <linux/io.h>
#include <linux/serial_sci.h>
+#include <linux/usb/ohci_pdriver.h>
static struct plat_sci_port scif0_platform_data = {
.mapbase = 0xffe00000,
@@ -106,12 +107,15 @@
static u64 usb_ohci_dma_mask = 0xffffffffUL;
+static struct usb_ohci_pdata usb_ohci_pdata;
+
static struct platform_device usb_ohci_device = {
- .name = "sh_ohci",
+ .name = "ohci-platform",
.id = -1,
.dev = {
.dma_mask = &usb_ohci_dma_mask,
.coherent_dma_mask = 0xffffffff,
+ .platform_data = &usb_ohci_pdata,
},
.num_resources = ARRAY_SIZE(usb_ohci_resources),
.resource = usb_ohci_resources,
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7786.c b/arch/sh/kernel/cpu/sh4a/setup-sh7786.c
index 2e6952f..ab52d4d4 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7786.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7786.c
@@ -23,6 +23,7 @@
#include <linux/sh_timer.h>
#include <linux/sh_dma.h>
#include <linux/sh_intc.h>
+#include <linux/usb/ohci_pdriver.h>
#include <cpu/dma-register.h>
#include <asm/mmzone.h>
@@ -583,12 +584,15 @@
},
};
+static struct usb_ohci_pdata usb_ohci_pdata;
+
static struct platform_device usb_ohci_device = {
- .name = "sh_ohci",
+ .name = "ohci-platform",
.id = -1,
.dev = {
.dma_mask = &usb_ohci_device.dev.coherent_dma_mask,
.coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &usb_ohci_pdata,
},
.num_resources = ARRAY_SIZE(usb_ohci_resources),
.resource = usb_ohci_resources,
diff --git a/arch/sh/mm/mmap.c b/arch/sh/mm/mmap.c
index c71814e..6777177 100644
--- a/arch/sh/mm/mmap.c
+++ b/arch/sh/mm/mmap.c
@@ -147,7 +147,7 @@
* You really shouldn't be using read() or write() on /dev/mem. This
* might go away in the future.
*/
-int valid_phys_addr_range(unsigned long addr, size_t count)
+int valid_phys_addr_range(phys_addr_t addr, size_t count)
{
if (addr < __MEMORY_START)
return 0;
diff --git a/arch/sparc/include/uapi/asm/ioctls.h b/arch/sparc/include/uapi/asm/ioctls.h
index 9155f70..897d172 100644
--- a/arch/sparc/include/uapi/asm/ioctls.h
+++ b/arch/sparc/include/uapi/asm/ioctls.h
@@ -21,6 +21,9 @@
#define TCSETSF2 _IOW('T', 15, struct termios2)
#define TIOCGDEV _IOR('T',0x32, unsigned int) /* Get primary device node of /dev/console */
#define TIOCVHANGUP _IO('T', 0x37)
+#define TIOCGPKT _IOR('T', 0x38, int) /* Get packet mode state */
+#define TIOCGPTLCK _IOR('T', 0x39, int) /* Get Pty lock state */
+#define TIOCGEXCL _IOR('T', 0x40, int) /* Get exclusive mode state */
/* Note that all the ioctls that are not available in Linux have a
* double underscore on the front to: a) avoid some programs to
diff --git a/arch/um/drivers/chan_kern.c b/arch/um/drivers/chan_kern.c
index c3bba73..e9a0abc 100644
--- a/arch/um/drivers/chan_kern.c
+++ b/arch/um/drivers/chan_kern.c
@@ -83,21 +83,8 @@
static void tty_receive_char(struct tty_struct *tty, char ch)
{
- if (tty == NULL)
- return;
-
- if (I_IXON(tty) && !I_IXOFF(tty) && !tty->raw) {
- if (ch == STOP_CHAR(tty)) {
- stop_tty(tty);
- return;
- }
- else if (ch == START_CHAR(tty)) {
- start_tty(tty);
- return;
- }
- }
-
- tty_insert_flip_char(tty, ch, TTY_NORMAL);
+ if (tty)
+ tty_insert_flip_char(tty, ch, TTY_NORMAL);
}
static int open_one_chan(struct chan *chan)
diff --git a/arch/um/drivers/line.c b/arch/um/drivers/line.c
index fd9a15b..9ffc28b 100644
--- a/arch/um/drivers/line.c
+++ b/arch/um/drivers/line.c
@@ -584,6 +584,8 @@
printk(KERN_ERR "register_lines : can't register %s driver\n",
line_driver->name);
put_tty_driver(driver);
+ for (i = 0; i < nlines; i++)
+ tty_port_destroy(&lines[i].port);
return err;
}
diff --git a/arch/unicore32/kernel/pci.c b/arch/unicore32/kernel/pci.c
index b0056f6..7c43592 100644
--- a/arch/unicore32/kernel/pci.c
+++ b/arch/unicore32/kernel/pci.c
@@ -250,9 +250,7 @@
printk(KERN_INFO "PCI: bus%d: Fast back to back transfers %sabled\n",
bus->number, (features & PCI_COMMAND_FAST_BACK) ? "en" : "dis");
}
-#ifdef CONFIG_HOTPLUG
EXPORT_SYMBOL(pcibios_fixup_bus);
-#endif
static int __init pci_common_init(void)
{
diff --git a/arch/x86/include/asm/device.h b/arch/x86/include/asm/device.h
index 93e1c55..03dd729 100644
--- a/arch/x86/include/asm/device.h
+++ b/arch/x86/include/asm/device.h
@@ -2,9 +2,6 @@
#define _ASM_X86_DEVICE_H
struct dev_archdata {
-#ifdef CONFIG_ACPI
- void *acpi_handle;
-#endif
#ifdef CONFIG_X86_DEV_DMA_OPS
struct dma_map_ops *dma_ops;
#endif
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index e651f7a..e48cafc 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -574,6 +574,12 @@
return irq;
}
+EXPORT_SYMBOL_GPL(acpi_register_gsi);
+
+void acpi_unregister_gsi(u32 gsi)
+{
+}
+EXPORT_SYMBOL_GPL(acpi_unregister_gsi);
void __init acpi_set_irq_model_pic(void)
{
diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c
index 11676cf..d5e0d71 100644
--- a/arch/x86/kernel/acpi/sleep.c
+++ b/arch/x86/kernel/acpi/sleep.c
@@ -101,6 +101,8 @@
#endif
if (strncmp(str, "nonvs", 5) == 0)
acpi_nvs_nosave();
+ if (strncmp(str, "nonvs_s3", 8) == 0)
+ acpi_nvs_nosave_s3();
if (strncmp(str, "old_ordering", 12) == 0)
acpi_old_suspend_ordering();
str = strchr(str, ',');
diff --git a/arch/x86/platform/ce4100/ce4100.c b/arch/x86/platform/ce4100/ce4100.c
index 92525cb..f8ab494 100644
--- a/arch/x86/platform/ce4100/ce4100.c
+++ b/arch/x86/platform/ce4100/ce4100.c
@@ -105,8 +105,11 @@
up->membase =
(void __iomem *)__fix_to_virt(FIX_EARLYCON_MEM_BASE);
up->membase += up->mapbase & ~PAGE_MASK;
+ up->mapbase += port * 0x100;
+ up->membase += port * 0x100;
up->iotype = UPIO_MEM32;
up->regshift = 2;
+ up->irq = 4;
}
#endif
up->iobase = 0;
diff --git a/arch/xtensa/include/uapi/asm/ioctls.h b/arch/xtensa/include/uapi/asm/ioctls.h
index 2aa4cd9..b4cb110 100644
--- a/arch/xtensa/include/uapi/asm/ioctls.h
+++ b/arch/xtensa/include/uapi/asm/ioctls.h
@@ -101,6 +101,9 @@
#define TIOCGDEV _IOR('T',0x32, unsigned int) /* Get primary device node of /dev/console */
#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */
#define TIOCVHANGUP _IO('T', 0x37)
+#define TIOCGPKT _IOR('T', 0x38, int) /* Get packet mode state */
+#define TIOCGPTLCK _IOR('T', 0x39, int) /* Get Pty lock state */
+#define TIOCGEXCL _IOR('T', 0x40, int) /* Get exclusive mode state */
#define TIOCSERCONFIG _IO('T', 83)
#define TIOCSERGWILD _IOR('T', 84, int)
diff --git a/arch/xtensa/platforms/iss/console.c b/arch/xtensa/platforms/iss/console.c
index 7e74895..8207a11 100644
--- a/arch/xtensa/platforms/iss/console.c
+++ b/arch/xtensa/platforms/iss/console.c
@@ -221,6 +221,7 @@
printk("ISS_SERIAL: failed to unregister serial driver (%d)\n",
error);
put_tty_driver(serial_driver);
+ tty_port_destroy(&serial_port);
}
diff --git a/drivers/Kconfig b/drivers/Kconfig
index dbdefa3f..f5fb072 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -156,4 +156,6 @@
source "drivers/irqchip/Kconfig"
+source "drivers/ipack/Kconfig"
+
endmenu
diff --git a/drivers/Makefile b/drivers/Makefile
index a16a8d0..7863b9f 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -145,3 +145,4 @@
obj-$(CONFIG_MEMORY) += memory/
obj-$(CONFIG_IIO) += iio/
obj-$(CONFIG_VME_BUS) += vme/
+obj-$(CONFIG_IPACK_BUS) += ipack/
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index 119d58d..0300bf6 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -181,6 +181,12 @@
This driver supports ACPI-controlled docking stations and removable
drive bays such as the IBM Ultrabay and the Dell Module Bay.
+config ACPI_I2C
+ def_tristate I2C
+ depends on I2C
+ help
+ ACPI I2C enumeration support.
+
config ACPI_PROCESSOR
tristate "Processor"
select THERMAL
diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
index 82422fe..2a4502b 100644
--- a/drivers/acpi/Makefile
+++ b/drivers/acpi/Makefile
@@ -21,9 +21,10 @@
acpi-y += osl.o utils.o reboot.o
acpi-y += nvs.o
-# sleep related files
+# Power management related files
acpi-y += wakeup.o
acpi-y += sleep.o
+acpi-$(CONFIG_PM) += device_pm.o
acpi-$(CONFIG_ACPI_SLEEP) += proc.o
@@ -32,10 +33,12 @@
#
acpi-y += bus.o glue.o
acpi-y += scan.o
+acpi-y += resource.o
acpi-y += processor_core.o
acpi-y += ec.o
acpi-$(CONFIG_ACPI_DOCK) += dock.o
acpi-y += pci_root.o pci_link.o pci_irq.o pci_bind.o
+acpi-y += acpi_platform.o
acpi-y += power.o
acpi-y += event.o
acpi-y += sysfs.o
@@ -67,6 +70,7 @@
obj-$(CONFIG_ACPI_EC_DEBUGFS) += ec_sys.o
obj-$(CONFIG_ACPI_CUSTOM_METHOD)+= custom_method.o
obj-$(CONFIG_ACPI_BGRT) += bgrt.o
+obj-$(CONFIG_ACPI_I2C) += acpi_i2c.o
# processor has its own "processor." module_param namespace
processor-y := processor_driver.o processor_throttling.o
diff --git a/drivers/acpi/acpi_i2c.c b/drivers/acpi/acpi_i2c.c
new file mode 100644
index 0000000..82045e3
--- /dev/null
+++ b/drivers/acpi/acpi_i2c.c
@@ -0,0 +1,103 @@
+/*
+ * ACPI I2C enumeration support
+ *
+ * Copyright (C) 2012, Intel Corporation
+ * Author: Mika Westerberg <mika.westerberg@linux.intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/acpi.h>
+#include <linux/device.h>
+#include <linux/export.h>
+#include <linux/i2c.h>
+#include <linux/ioport.h>
+
+ACPI_MODULE_NAME("i2c");
+
+static int acpi_i2c_add_resource(struct acpi_resource *ares, void *data)
+{
+ struct i2c_board_info *info = data;
+
+ if (ares->type == ACPI_RESOURCE_TYPE_SERIAL_BUS) {
+ struct acpi_resource_i2c_serialbus *sb;
+
+ sb = &ares->data.i2c_serial_bus;
+ if (sb->type == ACPI_RESOURCE_SERIAL_TYPE_I2C) {
+ info->addr = sb->slave_address;
+ if (sb->access_mode == ACPI_I2C_10BIT_MODE)
+ info->flags |= I2C_CLIENT_TEN;
+ }
+ } else if (info->irq < 0) {
+ struct resource r;
+
+ if (acpi_dev_resource_interrupt(ares, 0, &r))
+ info->irq = r.start;
+ }
+
+ /* Tell the ACPI core to skip this resource */
+ return 1;
+}
+
+static acpi_status acpi_i2c_add_device(acpi_handle handle, u32 level,
+ void *data, void **return_value)
+{
+ struct i2c_adapter *adapter = data;
+ struct list_head resource_list;
+ struct i2c_board_info info;
+ struct acpi_device *adev;
+ int ret;
+
+ if (acpi_bus_get_device(handle, &adev))
+ return AE_OK;
+ if (acpi_bus_get_status(adev) || !adev->status.present)
+ return AE_OK;
+
+ memset(&info, 0, sizeof(info));
+ info.acpi_node.handle = handle;
+ info.irq = -1;
+
+ INIT_LIST_HEAD(&resource_list);
+ ret = acpi_dev_get_resources(adev, &resource_list,
+ acpi_i2c_add_resource, &info);
+ acpi_dev_free_resource_list(&resource_list);
+
+ if (ret < 0 || !info.addr)
+ return AE_OK;
+
+ strlcpy(info.type, dev_name(&adev->dev), sizeof(info.type));
+ if (!i2c_new_device(adapter, &info)) {
+ dev_err(&adapter->dev,
+ "failed to add I2C device %s from ACPI\n",
+ dev_name(&adev->dev));
+ }
+
+ return AE_OK;
+}
+
+/**
+ * acpi_i2c_register_devices - enumerate I2C slave devices behind adapter
+ * @adapter: pointer to adapter
+ *
+ * Enumerate all I2C slave devices behind this adapter by walking the ACPI
+ * namespace. When a device is found it will be added to the Linux device
+ * model and bound to the corresponding ACPI handle.
+ */
+void acpi_i2c_register_devices(struct i2c_adapter *adapter)
+{
+ acpi_handle handle;
+ acpi_status status;
+
+ handle = ACPI_HANDLE(&adapter->dev);
+ if (!handle)
+ return;
+
+ status = acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, 1,
+ acpi_i2c_add_device, NULL,
+ adapter, NULL);
+ if (ACPI_FAILURE(status))
+ dev_warn(&adapter->dev, "failed to enumerate I2C slaves\n");
+}
+EXPORT_SYMBOL_GPL(acpi_i2c_register_devices);
diff --git a/drivers/acpi/acpi_memhotplug.c b/drivers/acpi/acpi_memhotplug.c
index 24c807f..eb30e5a 100644
--- a/drivers/acpi/acpi_memhotplug.c
+++ b/drivers/acpi/acpi_memhotplug.c
@@ -31,6 +31,7 @@
#include <linux/types.h>
#include <linux/memory_hotplug.h>
#include <linux/slab.h>
+#include <linux/acpi.h>
#include <acpi/acpi_drivers.h>
#define ACPI_MEMORY_DEVICE_CLASS "memory"
@@ -78,6 +79,7 @@
unsigned short caching; /* memory cache attribute */
unsigned short write_protect; /* memory read/write attribute */
unsigned int enabled:1;
+ unsigned int failed:1;
};
struct acpi_memory_device {
@@ -86,8 +88,6 @@
struct list_head res_list;
};
-static int acpi_hotmem_initialized;
-
static acpi_status
acpi_memory_get_resource(struct acpi_resource *resource, void *context)
{
@@ -125,12 +125,20 @@
return AE_OK;
}
+static void
+acpi_memory_free_device_resources(struct acpi_memory_device *mem_device)
+{
+ struct acpi_memory_info *info, *n;
+
+ list_for_each_entry_safe(info, n, &mem_device->res_list, list)
+ kfree(info);
+ INIT_LIST_HEAD(&mem_device->res_list);
+}
+
static int
acpi_memory_get_device_resources(struct acpi_memory_device *mem_device)
{
acpi_status status;
- struct acpi_memory_info *info, *n;
-
if (!list_empty(&mem_device->res_list))
return 0;
@@ -138,9 +146,7 @@
status = acpi_walk_resources(mem_device->device->handle, METHOD_NAME__CRS,
acpi_memory_get_resource, mem_device);
if (ACPI_FAILURE(status)) {
- list_for_each_entry_safe(info, n, &mem_device->res_list, list)
- kfree(info);
- INIT_LIST_HEAD(&mem_device->res_list);
+ acpi_memory_free_device_resources(mem_device);
return -EINVAL;
}
@@ -170,7 +176,7 @@
/* Get the parent device */
result = acpi_bus_get_device(phandle, &pdevice);
if (result) {
- printk(KERN_WARNING PREFIX "Cannot get acpi bus device");
+ acpi_handle_warn(phandle, "Cannot get acpi bus device\n");
return -EINVAL;
}
@@ -180,14 +186,14 @@
*/
result = acpi_bus_add(&device, pdevice, handle, ACPI_BUS_TYPE_DEVICE);
if (result) {
- printk(KERN_WARNING PREFIX "Cannot add acpi bus");
+ acpi_handle_warn(handle, "Cannot add acpi bus\n");
return -EINVAL;
}
end:
*mem_device = acpi_driver_data(device);
if (!(*mem_device)) {
- printk(KERN_ERR "\n driver data not found");
+ dev_err(&device->dev, "driver data not found\n");
return -ENODEV;
}
@@ -224,7 +230,8 @@
/* Get the range from the _CRS */
result = acpi_memory_get_device_resources(mem_device);
if (result) {
- printk(KERN_ERR PREFIX "get_device_resources failed\n");
+ dev_err(&mem_device->device->dev,
+ "get_device_resources failed\n");
mem_device->state = MEMORY_INVALID_STATE;
return result;
}
@@ -251,13 +258,27 @@
node = memory_add_physaddr_to_nid(info->start_addr);
result = add_memory(node, info->start_addr, info->length);
- if (result)
+
+ /*
+ * If the memory block has been used by the kernel, add_memory()
+ * returns -EEXIST. If add_memory() returns the other error, it
+ * means that this memory block is not used by the kernel.
+ */
+ if (result && result != -EEXIST) {
+ info->failed = 1;
continue;
- info->enabled = 1;
+ }
+
+ if (!result)
+ info->enabled = 1;
+ /*
+ * Add num_enable even if add_memory() returns -EEXIST, so the
+ * device is bound to this driver.
+ */
num_enabled++;
}
if (!num_enabled) {
- printk(KERN_ERR PREFIX "add_memory failed\n");
+ dev_err(&mem_device->device->dev, "add_memory failed\n");
mem_device->state = MEMORY_INVALID_STATE;
return -EINVAL;
}
@@ -272,68 +293,31 @@
return 0;
}
-static int acpi_memory_powerdown_device(struct acpi_memory_device *mem_device)
+static int acpi_memory_remove_memory(struct acpi_memory_device *mem_device)
{
- acpi_status status;
- struct acpi_object_list arg_list;
- union acpi_object arg;
- unsigned long long current_status;
-
-
- /* Issue the _EJ0 command */
- arg_list.count = 1;
- arg_list.pointer = &arg;
- arg.type = ACPI_TYPE_INTEGER;
- arg.integer.value = 1;
- status = acpi_evaluate_object(mem_device->device->handle,
- "_EJ0", &arg_list, NULL);
- /* Return on _EJ0 failure */
- if (ACPI_FAILURE(status)) {
- ACPI_EXCEPTION((AE_INFO, status, "_EJ0 failed"));
- return -ENODEV;
- }
-
- /* Evalute _STA to check if the device is disabled */
- status = acpi_evaluate_integer(mem_device->device->handle, "_STA",
- NULL, ¤t_status);
- if (ACPI_FAILURE(status))
- return -ENODEV;
-
- /* Check for device status. Device should be disabled */
- if (current_status & ACPI_STA_DEVICE_ENABLED)
- return -EINVAL;
-
- return 0;
-}
-
-static int acpi_memory_disable_device(struct acpi_memory_device *mem_device)
-{
- int result;
+ int result = 0;
struct acpi_memory_info *info, *n;
-
- /*
- * Ask the VM to offline this memory range.
- * Note: Assume that this function returns zero on success
- */
list_for_each_entry_safe(info, n, &mem_device->res_list, list) {
- if (info->enabled) {
- result = remove_memory(info->start_addr, info->length);
- if (result)
- return result;
- }
+ if (info->failed)
+ /* The kernel does not use this memory block */
+ continue;
+
+ if (!info->enabled)
+ /*
+ * The kernel uses this memory block, but it may be not
+ * managed by us.
+ */
+ return -EBUSY;
+
+ result = remove_memory(info->start_addr, info->length);
+ if (result)
+ return result;
+
+ list_del(&info->list);
kfree(info);
}
- /* Power-off and eject the device */
- result = acpi_memory_powerdown_device(mem_device);
- if (result) {
- /* Set the status of the device to invalid */
- mem_device->state = MEMORY_INVALID_STATE;
- return result;
- }
-
- mem_device->state = MEMORY_POWER_OFF_STATE;
return result;
}
@@ -341,6 +325,7 @@
{
struct acpi_memory_device *mem_device;
struct acpi_device *device;
+ struct acpi_eject_event *ej_event = NULL;
u32 ost_code = ACPI_OST_SC_NON_SPECIFIC_FAILURE; /* default */
switch (event) {
@@ -353,7 +338,7 @@
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"\nReceived DEVICE CHECK notification for device\n"));
if (acpi_memory_get_device(handle, &mem_device)) {
- printk(KERN_ERR PREFIX "Cannot find driver data\n");
+ acpi_handle_err(handle, "Cannot find driver data\n");
break;
}
@@ -361,7 +346,7 @@
break;
if (acpi_memory_enable_device(mem_device)) {
- printk(KERN_ERR PREFIX "Cannot enable memory device\n");
+ acpi_handle_err(handle,"Cannot enable memory device\n");
break;
}
@@ -373,40 +358,28 @@
"\nReceived EJECT REQUEST notification for device\n"));
if (acpi_bus_get_device(handle, &device)) {
- printk(KERN_ERR PREFIX "Device doesn't exist\n");
+ acpi_handle_err(handle, "Device doesn't exist\n");
break;
}
mem_device = acpi_driver_data(device);
if (!mem_device) {
- printk(KERN_ERR PREFIX "Driver Data is NULL\n");
+ acpi_handle_err(handle, "Driver Data is NULL\n");
break;
}
- /*
- * Currently disabling memory device from kernel mode
- * TBD: Can also be disabled from user mode scripts
- * TBD: Can also be disabled by Callback registration
- * with generic sysfs driver
- */
- if (acpi_memory_disable_device(mem_device)) {
- printk(KERN_ERR PREFIX "Disable memory device\n");
- /*
- * If _EJ0 was called but failed, _OST is not
- * necessary.
- */
- if (mem_device->state == MEMORY_INVALID_STATE)
- return;
-
+ ej_event = kmalloc(sizeof(*ej_event), GFP_KERNEL);
+ if (!ej_event) {
+ pr_err(PREFIX "No memory, dropping EJECT\n");
break;
}
- /*
- * TBD: Invoke acpi_bus_remove to cleanup data structures
- */
+ ej_event->handle = handle;
+ ej_event->event = ACPI_NOTIFY_EJECT_REQUEST;
+ acpi_os_hotplug_execute(acpi_bus_hot_remove_device,
+ (void *)ej_event);
- /* _EJ0 succeeded; _OST is not necessary */
+ /* eject is performed asynchronously */
return;
-
default:
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"Unsupported event [0x%x]\n", event));
@@ -420,6 +393,15 @@
return;
}
+static void acpi_memory_device_free(struct acpi_memory_device *mem_device)
+{
+ if (!mem_device)
+ return;
+
+ acpi_memory_free_device_resources(mem_device);
+ kfree(mem_device);
+}
+
static int acpi_memory_device_add(struct acpi_device *device)
{
int result;
@@ -449,23 +431,16 @@
/* Set the device state */
mem_device->state = MEMORY_POWER_ON_STATE;
- printk(KERN_DEBUG "%s \n", acpi_device_name(device));
-
- /*
- * Early boot code has recognized memory area by EFI/E820.
- * If DSDT shows these memory devices on boot, hotplug is not necessary
- * for them. So, it just returns until completion of this driver's
- * start up.
- */
- if (!acpi_hotmem_initialized)
- return 0;
+ pr_debug("%s\n", acpi_device_name(device));
if (!acpi_memory_check_device(mem_device)) {
/* call add_memory func */
result = acpi_memory_enable_device(mem_device);
- if (result)
- printk(KERN_ERR PREFIX
+ if (result) {
+ dev_err(&device->dev,
"Error in acpi_memory_enable_device\n");
+ acpi_memory_device_free(mem_device);
+ }
}
return result;
}
@@ -473,13 +448,18 @@
static int acpi_memory_device_remove(struct acpi_device *device, int type)
{
struct acpi_memory_device *mem_device = NULL;
-
+ int result;
if (!device || !acpi_driver_data(device))
return -EINVAL;
mem_device = acpi_driver_data(device);
- kfree(mem_device);
+
+ result = acpi_memory_remove_memory(mem_device);
+ if (result)
+ return result;
+
+ acpi_memory_device_free(mem_device);
return 0;
}
@@ -568,7 +548,6 @@
return -ENODEV;
}
- acpi_hotmem_initialized = 1;
return 0;
}
diff --git a/drivers/acpi/acpi_pad.c b/drivers/acpi/acpi_pad.c
index af4aad6..16fa979 100644
--- a/drivers/acpi/acpi_pad.c
+++ b/drivers/acpi/acpi_pad.c
@@ -286,7 +286,7 @@
struct device_attribute *attr, const char *buf, size_t count)
{
unsigned long num;
- if (strict_strtoul(buf, 0, &num))
+ if (kstrtoul(buf, 0, &num))
return -EINVAL;
if (num < 1 || num >= 100)
return -EINVAL;
@@ -309,7 +309,7 @@
struct device_attribute *attr, const char *buf, size_t count)
{
unsigned long num;
- if (strict_strtoul(buf, 0, &num))
+ if (kstrtoul(buf, 0, &num))
return -EINVAL;
if (num < 1 || num >= 100)
return -EINVAL;
@@ -332,7 +332,7 @@
struct device_attribute *attr, const char *buf, size_t count)
{
unsigned long num;
- if (strict_strtoul(buf, 0, &num))
+ if (kstrtoul(buf, 0, &num))
return -EINVAL;
mutex_lock(&isolated_cpus_lock);
acpi_pad_idle_cpus(num);
@@ -457,7 +457,7 @@
dev_name(&device->dev), event, 0);
break;
default:
- printk(KERN_WARNING "Unsupported event [0x%x]\n", event);
+ pr_warn("Unsupported event [0x%x]\n", event);
break;
}
}
diff --git a/drivers/acpi/acpi_platform.c b/drivers/acpi/acpi_platform.c
new file mode 100644
index 0000000..db129b9
--- /dev/null
+++ b/drivers/acpi/acpi_platform.c
@@ -0,0 +1,104 @@
+/*
+ * ACPI support for platform bus type.
+ *
+ * Copyright (C) 2012, Intel Corporation
+ * Authors: Mika Westerberg <mika.westerberg@linux.intel.com>
+ * Mathias Nyman <mathias.nyman@linux.intel.com>
+ * Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/acpi.h>
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include "internal.h"
+
+ACPI_MODULE_NAME("platform");
+
+/**
+ * acpi_create_platform_device - Create platform device for ACPI device node
+ * @adev: ACPI device node to create a platform device for.
+ *
+ * Check if the given @adev can be represented as a platform device and, if
+ * that's the case, create and register a platform device, populate its common
+ * resources and returns a pointer to it. Otherwise, return %NULL.
+ *
+ * The platform device's name will be taken from the @adev's _HID and _UID.
+ */
+struct platform_device *acpi_create_platform_device(struct acpi_device *adev)
+{
+ struct platform_device *pdev = NULL;
+ struct acpi_device *acpi_parent;
+ struct platform_device_info pdevinfo;
+ struct resource_list_entry *rentry;
+ struct list_head resource_list;
+ struct resource *resources;
+ int count;
+
+ /* If the ACPI node already has a physical device attached, skip it. */
+ if (adev->physical_node_count)
+ return NULL;
+
+ INIT_LIST_HEAD(&resource_list);
+ count = acpi_dev_get_resources(adev, &resource_list, NULL, NULL);
+ if (count <= 0)
+ return NULL;
+
+ resources = kmalloc(count * sizeof(struct resource), GFP_KERNEL);
+ if (!resources) {
+ dev_err(&adev->dev, "No memory for resources\n");
+ acpi_dev_free_resource_list(&resource_list);
+ return NULL;
+ }
+ count = 0;
+ list_for_each_entry(rentry, &resource_list, node)
+ resources[count++] = rentry->res;
+
+ acpi_dev_free_resource_list(&resource_list);
+
+ memset(&pdevinfo, 0, sizeof(pdevinfo));
+ /*
+ * If the ACPI node has a parent and that parent has a physical device
+ * attached to it, that physical device should be the parent of the
+ * platform device we are about to create.
+ */
+ pdevinfo.parent = NULL;
+ acpi_parent = adev->parent;
+ if (acpi_parent) {
+ struct acpi_device_physical_node *entry;
+ struct list_head *list;
+
+ mutex_lock(&acpi_parent->physical_node_lock);
+ list = &acpi_parent->physical_node_list;
+ if (!list_empty(list)) {
+ entry = list_first_entry(list,
+ struct acpi_device_physical_node,
+ node);
+ pdevinfo.parent = entry->dev;
+ }
+ mutex_unlock(&acpi_parent->physical_node_lock);
+ }
+ pdevinfo.name = dev_name(&adev->dev);
+ pdevinfo.id = -1;
+ pdevinfo.res = resources;
+ pdevinfo.num_res = count;
+ pdevinfo.acpi_node.handle = adev->handle;
+ pdev = platform_device_register_full(&pdevinfo);
+ if (IS_ERR(pdev)) {
+ dev_err(&adev->dev, "platform device creation failed: %ld\n",
+ PTR_ERR(pdev));
+ pdev = NULL;
+ } else {
+ dev_dbg(&adev->dev, "created platform device %s\n",
+ dev_name(&pdev->dev));
+ }
+
+ kfree(resources);
+ return pdev;
+}
diff --git a/drivers/acpi/acpica/Makefile b/drivers/acpi/acpica/Makefile
index 7f1d407..c8bc24b 100644
--- a/drivers/acpi/acpica/Makefile
+++ b/drivers/acpi/acpica/Makefile
@@ -161,3 +161,6 @@
utxfinit.o \
utxferror.o \
utxfmutex.o
+
+acpi-$(ACPI_FUTURE_USAGE) += uttrack.o utcache.o utclib.o
+
diff --git a/drivers/acpi/acpica/acdebug.h b/drivers/acpi/acpica/acdebug.h
index 5e8abb0..432a318 100644
--- a/drivers/acpi/acpica/acdebug.h
+++ b/drivers/acpi/acpica/acdebug.h
@@ -44,17 +44,28 @@
#ifndef __ACDEBUG_H__
#define __ACDEBUG_H__
-#define ACPI_DEBUG_BUFFER_SIZE 4196
+#define ACPI_DEBUG_BUFFER_SIZE 0x4000 /* 16K buffer for return objects */
-struct command_info {
+struct acpi_db_command_info {
char *name; /* Command Name */
u8 min_args; /* Minimum arguments required */
};
-struct argument_info {
+struct acpi_db_command_help {
+ u8 line_count; /* Number of help lines */
+ char *invocation; /* Command Invocation */
+ char *description; /* Command Description */
+};
+
+struct acpi_db_argument_info {
char *name; /* Argument Name */
};
+struct acpi_db_execute_walk {
+ u32 count;
+ u32 max_count;
+};
+
#define PARAM_LIST(pl) pl
#define DBTEST_OUTPUT_LEVEL(lvl) if (acpi_gbl_db_opt_verbose)
#define VERBOSE_PRINT(fp) DBTEST_OUTPUT_LEVEL(lvl) {\
@@ -77,43 +88,19 @@
/*
* dbcmds - debug commands and output routines
*/
-acpi_status acpi_db_disassemble_method(char *name);
+struct acpi_namespace_node *acpi_db_convert_to_node(char *in_string);
void acpi_db_display_table_info(char *table_arg);
-void acpi_db_unload_acpi_table(char *table_arg, char *instance_arg);
+void acpi_db_display_template(char *buffer_arg);
-void
-acpi_db_set_method_breakpoint(char *location,
- struct acpi_walk_state *walk_state,
- union acpi_parse_object *op);
-
-void acpi_db_set_method_call_breakpoint(union acpi_parse_object *op);
-
-void acpi_db_get_bus_info(void);
-
-void acpi_db_disassemble_aml(char *statements, union acpi_parse_object *op);
-
-void acpi_db_dump_namespace(char *start_arg, char *depth_arg);
-
-void acpi_db_dump_namespace_by_owner(char *owner_arg, char *depth_arg);
+void acpi_db_unload_acpi_table(char *name);
void acpi_db_send_notify(char *name, u32 value);
-void acpi_db_set_method_data(char *type_arg, char *index_arg, char *value_arg);
-
-acpi_status
-acpi_db_display_objects(char *obj_type_arg, char *display_count_arg);
-
void acpi_db_display_interfaces(char *action_arg, char *interface_name_arg);
-acpi_status acpi_db_find_name_in_namespace(char *name_arg);
-
-void acpi_db_set_scope(char *name);
-
-ACPI_HW_DEPENDENT_RETURN_OK(acpi_status acpi_db_sleep(char *object_arg))
-
-void acpi_db_find_references(char *object_arg);
+acpi_status acpi_db_sleep(char *object_arg);
void acpi_db_display_locks(void);
@@ -121,15 +108,51 @@
ACPI_HW_DEPENDENT_RETURN_VOID(void acpi_db_display_gpes(void))
-void acpi_db_check_integrity(void);
+void acpi_db_display_handlers(void);
ACPI_HW_DEPENDENT_RETURN_VOID(void
acpi_db_generate_gpe(char *gpe_arg,
char *block_arg))
+/*
+ * dbmethod - control method commands
+ */
+void
+acpi_db_set_method_breakpoint(char *location,
+ struct acpi_walk_state *walk_state,
+ union acpi_parse_object *op);
+
+void acpi_db_set_method_call_breakpoint(union acpi_parse_object *op);
+
+void acpi_db_set_method_data(char *type_arg, char *index_arg, char *value_arg);
+
+acpi_status acpi_db_disassemble_method(char *name);
+
+void acpi_db_disassemble_aml(char *statements, union acpi_parse_object *op);
+
+void acpi_db_batch_execute(char *count_arg);
+
+/*
+ * dbnames - namespace commands
+ */
+void acpi_db_set_scope(char *name);
+
+void acpi_db_dump_namespace(char *start_arg, char *depth_arg);
+
+void acpi_db_dump_namespace_by_owner(char *owner_arg, char *depth_arg);
+
+acpi_status acpi_db_find_name_in_namespace(char *name_arg);
+
void acpi_db_check_predefined_names(void);
-void acpi_db_batch_execute(void);
+acpi_status
+acpi_db_display_objects(char *obj_type_arg, char *display_count_arg);
+
+void acpi_db_check_integrity(void);
+
+void acpi_db_find_references(char *object_arg);
+
+void acpi_db_get_bus_info(void);
/*
* dbdisply - debug display commands
@@ -161,7 +184,8 @@
/*
* dbexec - debugger control method execution
*/
-void acpi_db_execute(char *name, char **args, u32 flags);
+void
+acpi_db_execute(char *name, char **args, acpi_object_type * types, u32 flags);
void
acpi_db_create_execution_threads(char *num_threads_arg,
@@ -175,7 +199,8 @@
* dbfileio - Debugger file I/O commands
*/
acpi_object_type
-acpi_db_match_argument(char *user_argument, struct argument_info *arguments);
+acpi_db_match_argument(char *user_argument,
+ struct acpi_db_argument_info *arguments);
void acpi_db_close_debug_file(void);
@@ -208,6 +233,11 @@
void ACPI_SYSTEM_XFACE acpi_db_execute_thread(void *context);
+acpi_status acpi_db_user_commands(char prompt, union acpi_parse_object *op);
+
+char *acpi_db_get_next_token(char *string,
+ char **next, acpi_object_type * return_type);
+
/*
* dbstats - Generation and display of ACPI table statistics
*/
diff --git a/drivers/acpi/acpica/acdispat.h b/drivers/acpi/acpica/acdispat.h
index 5935ba6..ed33ebc 100644
--- a/drivers/acpi/acpica/acdispat.h
+++ b/drivers/acpi/acpica/acdispat.h
@@ -309,10 +309,13 @@
acpi_status
acpi_ds_obj_stack_pop(u32 pop_count, struct acpi_walk_state *walk_state);
-struct acpi_walk_state *acpi_ds_create_walk_state(acpi_owner_id owner_id, union acpi_parse_object
- *origin, union acpi_operand_object
- *mth_desc, struct acpi_thread_state
- *thread);
+struct acpi_walk_state * acpi_ds_create_walk_state(acpi_owner_id owner_id,
+ union acpi_parse_object
+ *origin,
+ union acpi_operand_object
+ *mth_desc,
+ struct acpi_thread_state
+ *thread);
acpi_status
acpi_ds_init_aml_walk(struct acpi_walk_state *walk_state,
diff --git a/drivers/acpi/acpica/acevents.h b/drivers/acpi/acpica/acevents.h
index c0a43b3..e975c67 100644
--- a/drivers/acpi/acpica/acevents.h
+++ b/drivers/acpi/acpica/acevents.h
@@ -84,9 +84,11 @@
acpi_status acpi_ev_enable_gpe(struct acpi_gpe_event_info *gpe_event_info);
-acpi_status acpi_ev_add_gpe_reference(struct acpi_gpe_event_info *gpe_event_info);
+acpi_status
+acpi_ev_add_gpe_reference(struct acpi_gpe_event_info *gpe_event_info);
-acpi_status acpi_ev_remove_gpe_reference(struct acpi_gpe_event_info *gpe_event_info);
+acpi_status
+acpi_ev_remove_gpe_reference(struct acpi_gpe_event_info *gpe_event_info);
struct acpi_gpe_event_info *acpi_ev_get_gpe_event_info(acpi_handle gpe_device,
u32 gpe_number);
diff --git a/drivers/acpi/acpica/acglobal.h b/drivers/acpi/acpica/acglobal.h
index ce79100..64472e4 100644
--- a/drivers/acpi/acpica/acglobal.h
+++ b/drivers/acpi/acpica/acglobal.h
@@ -70,7 +70,7 @@
/*
* Enable "slack" in the AML interpreter? Default is FALSE, and the
- * interpreter strictly follows the ACPI specification. Setting to TRUE
+ * interpreter strictly follows the ACPI specification. Setting to TRUE
* allows the interpreter to ignore certain errors and/or bad AML constructs.
*
* Currently, these features are enabled by this flag:
@@ -155,26 +155,6 @@
/*****************************************************************************
*
- * Debug support
- *
- ****************************************************************************/
-
-/* Procedure nesting level for debug output */
-
-extern u32 acpi_gbl_nesting_level;
-
-ACPI_EXTERN u32 acpi_gpe_count;
-ACPI_EXTERN u32 acpi_fixed_event_count[ACPI_NUM_FIXED_EVENTS];
-
-/* Support for dynamic control method tracing mechanism */
-
-ACPI_EXTERN u32 acpi_gbl_original_dbg_level;
-ACPI_EXTERN u32 acpi_gbl_original_dbg_layer;
-ACPI_EXTERN u32 acpi_gbl_trace_dbg_level;
-ACPI_EXTERN u32 acpi_gbl_trace_dbg_layer;
-
-/*****************************************************************************
- *
* ACPI Table globals
*
****************************************************************************/
@@ -259,15 +239,6 @@
*
****************************************************************************/
-#ifdef ACPI_DBG_TRACK_ALLOCATIONS
-
-/* Lists for tracking memory allocations */
-
-ACPI_EXTERN struct acpi_memory_list *acpi_gbl_global_list;
-ACPI_EXTERN struct acpi_memory_list *acpi_gbl_ns_node_list;
-ACPI_EXTERN u8 acpi_gbl_display_final_mem_stats;
-#endif
-
/* Object caches */
ACPI_EXTERN acpi_cache_t *acpi_gbl_namespace_cache;
@@ -326,6 +297,15 @@
#endif
+#ifdef ACPI_DBG_TRACK_ALLOCATIONS
+
+/* Lists for tracking memory allocations */
+
+ACPI_EXTERN struct acpi_memory_list *acpi_gbl_global_list;
+ACPI_EXTERN struct acpi_memory_list *acpi_gbl_ns_node_list;
+ACPI_EXTERN u8 acpi_gbl_display_final_mem_stats;
+#endif
+
/*****************************************************************************
*
* Namespace globals
@@ -396,13 +376,35 @@
#if (!ACPI_REDUCED_HARDWARE)
ACPI_EXTERN u8 acpi_gbl_all_gpes_initialized;
-ACPI_EXTERN ACPI_GBL_EVENT_HANDLER acpi_gbl_global_event_handler;
+ACPI_EXTERN acpi_gbl_event_handler acpi_gbl_global_event_handler;
ACPI_EXTERN void *acpi_gbl_global_event_handler_context;
#endif /* !ACPI_REDUCED_HARDWARE */
/*****************************************************************************
*
+ * Debug support
+ *
+ ****************************************************************************/
+
+/* Procedure nesting level for debug output */
+
+extern u32 acpi_gbl_nesting_level;
+
+/* Event counters */
+
+ACPI_EXTERN u32 acpi_gpe_count;
+ACPI_EXTERN u32 acpi_fixed_event_count[ACPI_NUM_FIXED_EVENTS];
+
+/* Support for dynamic control method tracing mechanism */
+
+ACPI_EXTERN u32 acpi_gbl_original_dbg_level;
+ACPI_EXTERN u32 acpi_gbl_original_dbg_layer;
+ACPI_EXTERN u32 acpi_gbl_trace_dbg_level;
+ACPI_EXTERN u32 acpi_gbl_trace_dbg_layer;
+
+/*****************************************************************************
+ *
* Debugger globals
*
****************************************************************************/
@@ -426,10 +428,11 @@
ACPI_EXTERN u8 acpi_gbl_db_opt_ini_methods;
ACPI_EXTERN char *acpi_gbl_db_args[ACPI_DEBUGGER_MAX_ARGS];
-ACPI_EXTERN char acpi_gbl_db_line_buf[80];
-ACPI_EXTERN char acpi_gbl_db_parsed_buf[80];
-ACPI_EXTERN char acpi_gbl_db_scope_buf[40];
-ACPI_EXTERN char acpi_gbl_db_debug_filename[40];
+ACPI_EXTERN acpi_object_type acpi_gbl_db_arg_types[ACPI_DEBUGGER_MAX_ARGS];
+ACPI_EXTERN char acpi_gbl_db_line_buf[ACPI_DB_LINE_BUFFER_SIZE];
+ACPI_EXTERN char acpi_gbl_db_parsed_buf[ACPI_DB_LINE_BUFFER_SIZE];
+ACPI_EXTERN char acpi_gbl_db_scope_buf[80];
+ACPI_EXTERN char acpi_gbl_db_debug_filename[80];
ACPI_EXTERN u8 acpi_gbl_db_output_to_file;
ACPI_EXTERN char *acpi_gbl_db_buffer;
ACPI_EXTERN char *acpi_gbl_db_filename;
diff --git a/drivers/acpi/acpica/aclocal.h b/drivers/acpi/acpica/aclocal.h
index c816ee6..ff8bd00 100644
--- a/drivers/acpi/acpica/aclocal.h
+++ b/drivers/acpi/acpica/aclocal.h
@@ -262,10 +262,10 @@
};
typedef
-acpi_status(*ACPI_INTERNAL_METHOD) (struct acpi_walk_state * walk_state);
+acpi_status(*acpi_internal_method) (struct acpi_walk_state * walk_state);
/*
- * Bitmapped ACPI types. Used internally only
+ * Bitmapped ACPI types. Used internally only
*/
#define ACPI_BTYPE_ANY 0x00000000
#define ACPI_BTYPE_INTEGER 0x00000001
@@ -486,8 +486,10 @@
struct acpi_namespace_node *gpe_device;
};
-typedef acpi_status(*acpi_gpe_callback) (struct acpi_gpe_xrupt_info *gpe_xrupt_info,
- struct acpi_gpe_block_info *gpe_block, void *context);
+typedef acpi_status(*acpi_gpe_callback) (struct acpi_gpe_xrupt_info *
+ gpe_xrupt_info,
+ struct acpi_gpe_block_info *gpe_block,
+ void *context);
/* Information about each particular fixed event */
@@ -582,7 +584,7 @@
};
/*
- * Thread state - one per thread across multiple walk states. Multiple walk
+ * Thread state - one per thread across multiple walk states. Multiple walk
* states are created when there are nested control methods executing.
*/
struct acpi_thread_state {
@@ -645,7 +647,7 @@
*
****************************************************************************/
-typedef acpi_status(*ACPI_EXECUTE_OP) (struct acpi_walk_state * walk_state);
+typedef acpi_status(*acpi_execute_op) (struct acpi_walk_state * walk_state);
/* Address Range info block */
@@ -1031,6 +1033,7 @@
acpi_handle method;
acpi_handle main_thread_gate;
acpi_handle thread_complete_gate;
+ acpi_handle info_gate;
acpi_thread_id *threads;
u32 num_threads;
u32 num_created;
@@ -1041,6 +1044,7 @@
u32 num_loops;
char pathname[128];
char **args;
+ acpi_object_type *types;
/*
* Arguments to be passed to method for the command
diff --git a/drivers/acpi/acpica/acmacros.h b/drivers/acpi/acpica/acmacros.h
index a7f68c4..5efad99 100644
--- a/drivers/acpi/acpica/acmacros.h
+++ b/drivers/acpi/acpica/acmacros.h
@@ -84,29 +84,29 @@
/* These macros reverse the bytes during the move, converting little-endian to big endian */
- /* Big Endian <== Little Endian */
- /* Hi...Lo Lo...Hi */
+ /* Big Endian <== Little Endian */
+ /* Hi...Lo Lo...Hi */
/* 16-bit source, 16/32/64 destination */
#define ACPI_MOVE_16_TO_16(d, s) {(( u8 *)(void *)(d))[0] = ((u8 *)(void *)(s))[1];\
- (( u8 *)(void *)(d))[1] = ((u8 *)(void *)(s))[0];}
+ (( u8 *)(void *)(d))[1] = ((u8 *)(void *)(s))[0];}
#define ACPI_MOVE_16_TO_32(d, s) {(*(u32 *)(void *)(d))=0;\
- ((u8 *)(void *)(d))[2] = ((u8 *)(void *)(s))[1];\
- ((u8 *)(void *)(d))[3] = ((u8 *)(void *)(s))[0];}
+ ((u8 *)(void *)(d))[2] = ((u8 *)(void *)(s))[1];\
+ ((u8 *)(void *)(d))[3] = ((u8 *)(void *)(s))[0];}
#define ACPI_MOVE_16_TO_64(d, s) {(*(u64 *)(void *)(d))=0;\
- ((u8 *)(void *)(d))[6] = ((u8 *)(void *)(s))[1];\
- ((u8 *)(void *)(d))[7] = ((u8 *)(void *)(s))[0];}
+ ((u8 *)(void *)(d))[6] = ((u8 *)(void *)(s))[1];\
+ ((u8 *)(void *)(d))[7] = ((u8 *)(void *)(s))[0];}
/* 32-bit source, 16/32/64 destination */
#define ACPI_MOVE_32_TO_16(d, s) ACPI_MOVE_16_TO_16(d, s) /* Truncate to 16 */
#define ACPI_MOVE_32_TO_32(d, s) {(( u8 *)(void *)(d))[0] = ((u8 *)(void *)(s))[3];\
- (( u8 *)(void *)(d))[1] = ((u8 *)(void *)(s))[2];\
- (( u8 *)(void *)(d))[2] = ((u8 *)(void *)(s))[1];\
- (( u8 *)(void *)(d))[3] = ((u8 *)(void *)(s))[0];}
+ (( u8 *)(void *)(d))[1] = ((u8 *)(void *)(s))[2];\
+ (( u8 *)(void *)(d))[2] = ((u8 *)(void *)(s))[1];\
+ (( u8 *)(void *)(d))[3] = ((u8 *)(void *)(s))[0];}
#define ACPI_MOVE_32_TO_64(d, s) {(*(u64 *)(void *)(d))=0;\
((u8 *)(void *)(d))[4] = ((u8 *)(void *)(s))[3];\
@@ -196,24 +196,12 @@
#endif
#endif
-/* Macros based on machine integer width */
-
-#if ACPI_MACHINE_WIDTH == 32
-#define ACPI_MOVE_SIZE_TO_16(d, s) ACPI_MOVE_32_TO_16(d, s)
-
-#elif ACPI_MACHINE_WIDTH == 64
-#define ACPI_MOVE_SIZE_TO_16(d, s) ACPI_MOVE_64_TO_16(d, s)
-
-#else
-#error unknown ACPI_MACHINE_WIDTH
-#endif
-
/*
* Fast power-of-two math macros for non-optimized compilers
*/
-#define _ACPI_DIV(value, power_of2) ((u32) ((value) >> (power_of2)))
-#define _ACPI_MUL(value, power_of2) ((u32) ((value) << (power_of2)))
-#define _ACPI_MOD(value, divisor) ((u32) ((value) & ((divisor) -1)))
+#define _ACPI_DIV(value, power_of2) ((u32) ((value) >> (power_of2)))
+#define _ACPI_MUL(value, power_of2) ((u32) ((value) << (power_of2)))
+#define _ACPI_MOD(value, divisor) ((u32) ((value) & ((divisor) -1)))
#define ACPI_DIV_2(a) _ACPI_DIV(a, 1)
#define ACPI_MUL_2(a) _ACPI_MUL(a, 1)
@@ -238,12 +226,12 @@
/*
* Rounding macros (Power of two boundaries only)
*/
-#define ACPI_ROUND_DOWN(value, boundary) (((acpi_size)(value)) & \
- (~(((acpi_size) boundary)-1)))
+#define ACPI_ROUND_DOWN(value, boundary) (((acpi_size)(value)) & \
+ (~(((acpi_size) boundary)-1)))
-#define ACPI_ROUND_UP(value, boundary) ((((acpi_size)(value)) + \
- (((acpi_size) boundary)-1)) & \
- (~(((acpi_size) boundary)-1)))
+#define ACPI_ROUND_UP(value, boundary) ((((acpi_size)(value)) + \
+ (((acpi_size) boundary)-1)) & \
+ (~(((acpi_size) boundary)-1)))
/* Note: sizeof(acpi_size) evaluates to either 4 or 8 (32- vs 64-bit mode) */
@@ -264,7 +252,7 @@
#define ACPI_ROUND_UP_TO(value, boundary) (((value) + ((boundary)-1)) / (boundary))
-#define ACPI_IS_MISALIGNED(value) (((acpi_size) value) & (sizeof(acpi_size)-1))
+#define ACPI_IS_MISALIGNED(value) (((acpi_size) value) & (sizeof(acpi_size)-1))
/*
* Bitmask creation
@@ -355,7 +343,6 @@
* Ascii error messages can be configured out
*/
#ifndef ACPI_NO_ERROR_MESSAGES
-
/*
* Error reporting. Callers module and line number are inserted by AE_INFO,
* the plist contains a set of parens to allow variable-length lists.
@@ -375,18 +362,15 @@
#define ACPI_WARN_PREDEFINED(plist)
#define ACPI_INFO_PREDEFINED(plist)
-#endif /* ACPI_NO_ERROR_MESSAGES */
+#endif /* ACPI_NO_ERROR_MESSAGES */
/*
* Debug macros that are conditionally compiled
*/
#ifdef ACPI_DEBUG_OUTPUT
-
/*
* Function entry tracing
*/
-#ifdef CONFIG_ACPI_DEBUG_FUNC_TRACE
-
#define ACPI_FUNCTION_TRACE(a) ACPI_FUNCTION_NAME(a) \
acpi_ut_trace(ACPI_DEBUG_PARAMETERS)
#define ACPI_FUNCTION_TRACE_PTR(a, b) ACPI_FUNCTION_NAME(a) \
@@ -464,45 +448,19 @@
#endif /* ACPI_SIMPLE_RETURN_MACROS */
-#else /* !CONFIG_ACPI_DEBUG_FUNC_TRACE */
-
-#define ACPI_FUNCTION_TRACE(a)
-#define ACPI_FUNCTION_TRACE_PTR(a,b)
-#define ACPI_FUNCTION_TRACE_U32(a,b)
-#define ACPI_FUNCTION_TRACE_STR(a,b)
-#define ACPI_FUNCTION_EXIT
-#define ACPI_FUNCTION_STATUS_EXIT(s)
-#define ACPI_FUNCTION_VALUE_EXIT(s)
-#define ACPI_FUNCTION_TRACE(a)
-#define ACPI_FUNCTION_ENTRY()
-
-#define return_VOID return
-#define return_ACPI_STATUS(s) return(s)
-#define return_VALUE(s) return(s)
-#define return_UINT8(s) return(s)
-#define return_UINT32(s) return(s)
-#define return_PTR(s) return(s)
-
-#endif /* CONFIG_ACPI_DEBUG_FUNC_TRACE */
-
/* Conditional execution */
#define ACPI_DEBUG_EXEC(a) a
-#define ACPI_NORMAL_EXEC(a)
-
-#define ACPI_DEBUG_DEFINE(a) a;
#define ACPI_DEBUG_ONLY_MEMBERS(a) a;
#define _VERBOSE_STRUCTURES
-/* Stack and buffer dumping */
+/* Various object display routines for debug */
#define ACPI_DUMP_STACK_ENTRY(a) acpi_ex_dump_operand((a), 0)
-#define ACPI_DUMP_OPERANDS(a, b, c) acpi_ex_dump_operands(a, b, c)
-
+#define ACPI_DUMP_OPERANDS(a, b ,c) acpi_ex_dump_operands(a, b, c)
#define ACPI_DUMP_ENTRY(a, b) acpi_ns_dump_entry (a, b)
#define ACPI_DUMP_PATHNAME(a, b, c, d) acpi_ns_dump_pathname(a, b, c, d)
-#define ACPI_DUMP_RESOURCE_LIST(a) acpi_rs_dump_resource_list(a)
-#define ACPI_DUMP_BUFFER(a, b) acpi_ut_dump_buffer((u8 *) a, b, DB_BYTE_DISPLAY, _COMPONENT)
+#define ACPI_DUMP_BUFFER(a, b) acpi_ut_debug_dump_buffer((u8 *) a, b, DB_BYTE_DISPLAY, _COMPONENT)
#else
/*
@@ -510,25 +468,23 @@
* leaving no executable debug code!
*/
#define ACPI_DEBUG_EXEC(a)
-#define ACPI_NORMAL_EXEC(a) a;
-
-#define ACPI_DEBUG_DEFINE(a) do { } while(0)
-#define ACPI_DEBUG_ONLY_MEMBERS(a) do { } while(0)
-#define ACPI_FUNCTION_TRACE(a) do { } while(0)
-#define ACPI_FUNCTION_TRACE_PTR(a, b) do { } while(0)
-#define ACPI_FUNCTION_TRACE_U32(a, b) do { } while(0)
-#define ACPI_FUNCTION_TRACE_STR(a, b) do { } while(0)
-#define ACPI_FUNCTION_EXIT do { } while(0)
-#define ACPI_FUNCTION_STATUS_EXIT(s) do { } while(0)
-#define ACPI_FUNCTION_VALUE_EXIT(s) do { } while(0)
-#define ACPI_FUNCTION_ENTRY() do { } while(0)
-#define ACPI_DUMP_STACK_ENTRY(a) do { } while(0)
-#define ACPI_DUMP_OPERANDS(a, b, c) do { } while(0)
-#define ACPI_DUMP_ENTRY(a, b) do { } while(0)
-#define ACPI_DUMP_TABLES(a, b) do { } while(0)
-#define ACPI_DUMP_PATHNAME(a, b, c, d) do { } while(0)
-#define ACPI_DUMP_RESOURCE_LIST(a) do { } while(0)
-#define ACPI_DUMP_BUFFER(a, b) do { } while(0)
+#define ACPI_DEBUG_ONLY_MEMBERS(a)
+#define ACPI_FUNCTION_TRACE(a)
+#define ACPI_FUNCTION_TRACE_PTR(a, b)
+#define ACPI_FUNCTION_TRACE_U32(a, b)
+#define ACPI_FUNCTION_TRACE_STR(a, b)
+#define ACPI_FUNCTION_EXIT
+#define ACPI_FUNCTION_STATUS_EXIT(s)
+#define ACPI_FUNCTION_VALUE_EXIT(s)
+#define ACPI_FUNCTION_ENTRY()
+#define ACPI_DUMP_STACK_ENTRY(a)
+#define ACPI_DUMP_OPERANDS(a, b, c)
+#define ACPI_DUMP_ENTRY(a, b)
+#define ACPI_DUMP_TABLES(a, b)
+#define ACPI_DUMP_PATHNAME(a, b, c, d)
+#define ACPI_DUMP_BUFFER(a, b)
+#define ACPI_DEBUG_PRINT(pl)
+#define ACPI_DEBUG_PRINT_RAW(pl)
#define return_VOID return
#define return_ACPI_STATUS(s) return(s)
@@ -556,18 +512,6 @@
#define ACPI_DEBUGGER_EXEC(a)
#endif
-#ifdef ACPI_DEBUG_OUTPUT
-/*
- * 1) Set name to blanks
- * 2) Copy the object name
- */
-#define ACPI_ADD_OBJECT_NAME(a,b) ACPI_MEMSET (a->common.name, ' ', sizeof (a->common.name));\
- ACPI_STRNCPY (a->common.name, acpi_gbl_ns_type_names[b], sizeof (a->common.name))
-#else
-
-#define ACPI_ADD_OBJECT_NAME(a,b)
-#endif
-
/*
* Memory allocation tracking (DEBUG ONLY)
*/
@@ -578,13 +522,13 @@
/* Memory allocation */
#ifndef ACPI_ALLOCATE
-#define ACPI_ALLOCATE(a) acpi_ut_allocate((acpi_size)(a), ACPI_MEM_PARAMETERS)
+#define ACPI_ALLOCATE(a) acpi_ut_allocate((acpi_size) (a), ACPI_MEM_PARAMETERS)
#endif
#ifndef ACPI_ALLOCATE_ZEROED
-#define ACPI_ALLOCATE_ZEROED(a) acpi_ut_allocate_zeroed((acpi_size)(a), ACPI_MEM_PARAMETERS)
+#define ACPI_ALLOCATE_ZEROED(a) acpi_ut_allocate_zeroed((acpi_size) (a), ACPI_MEM_PARAMETERS)
#endif
#ifndef ACPI_FREE
-#define ACPI_FREE(a) acpio_os_free(a)
+#define ACPI_FREE(a) acpi_os_free(a)
#endif
#define ACPI_MEM_TRACKING(a)
@@ -592,16 +536,25 @@
/* Memory allocation */
-#define ACPI_ALLOCATE(a) acpi_ut_allocate_and_track((acpi_size)(a), ACPI_MEM_PARAMETERS)
-#define ACPI_ALLOCATE_ZEROED(a) acpi_ut_allocate_zeroed_and_track((acpi_size)(a), ACPI_MEM_PARAMETERS)
+#define ACPI_ALLOCATE(a) acpi_ut_allocate_and_track((acpi_size) (a), ACPI_MEM_PARAMETERS)
+#define ACPI_ALLOCATE_ZEROED(a) acpi_ut_allocate_zeroed_and_track((acpi_size) (a), ACPI_MEM_PARAMETERS)
#define ACPI_FREE(a) acpi_ut_free_and_track(a, ACPI_MEM_PARAMETERS)
#define ACPI_MEM_TRACKING(a) a
#endif /* ACPI_DBG_TRACK_ALLOCATIONS */
-/* Preemption point */
-#ifndef ACPI_PREEMPTION_POINT
-#define ACPI_PREEMPTION_POINT() /* no preemption */
-#endif
+/*
+ * Macros used for ACPICA utilities only
+ */
+
+/* Generate a UUID */
+
+#define ACPI_INIT_UUID(a, b, c, d0, d1, d2, d3, d4, d5, d6, d7) \
+ (a) & 0xFF, ((a) >> 8) & 0xFF, ((a) >> 16) & 0xFF, ((a) >> 24) & 0xFF, \
+ (b) & 0xFF, ((b) >> 8) & 0xFF, \
+ (c) & 0xFF, ((c) >> 8) & 0xFF, \
+ (d0), (d1), (d2), (d3), (d4), (d5), (d6), (d7)
+
+#define ACPI_IS_OCTAL_DIGIT(d) (((char)(d) >= '0') && ((char)(d) <= '7'))
#endif /* ACMACROS_H */
diff --git a/drivers/acpi/acpica/acobject.h b/drivers/acpi/acpica/acobject.h
index 364a130..24eb9ea 100644
--- a/drivers/acpi/acpica/acobject.h
+++ b/drivers/acpi/acpica/acobject.h
@@ -1,4 +1,3 @@
-
/******************************************************************************
*
* Name: acobject.h - Definition of union acpi_operand_object (Internal object only)
@@ -179,7 +178,7 @@
union acpi_operand_object *mutex;
u8 *aml_start;
union {
- ACPI_INTERNAL_METHOD implementation;
+ acpi_internal_method implementation;
union acpi_operand_object *handler;
} dispatch;
@@ -198,7 +197,7 @@
/******************************************************************************
*
- * Objects that can be notified. All share a common notify_info area.
+ * Objects that can be notified. All share a common notify_info area.
*
*****************************************************************************/
@@ -235,7 +234,7 @@
/******************************************************************************
*
- * Fields. All share a common header/info field.
+ * Fields. All share a common header/info field.
*
*****************************************************************************/
diff --git a/drivers/acpi/acpica/acopcode.h b/drivers/acpi/acpica/acopcode.h
index 9440d05..d786a51 100644
--- a/drivers/acpi/acpica/acopcode.h
+++ b/drivers/acpi/acpica/acopcode.h
@@ -54,7 +54,7 @@
#define _UNK 0x6B
/*
- * Reserved ASCII characters. Do not use any of these for
+ * Reserved ASCII characters. Do not use any of these for
* internal opcodes, since they are used to differentiate
* name strings from AML opcodes
*/
@@ -63,7 +63,7 @@
#define _PFX 0x6D
/*
- * All AML opcodes and the parse-time arguments for each. Used by the AML
+ * All AML opcodes and the parse-time arguments for each. Used by the AML
* parser Each list is compressed into a 32-bit number and stored in the
* master opcode table (in psopcode.c).
*/
@@ -193,7 +193,7 @@
#define ARGP_ZERO_OP ARG_NONE
/*
- * All AML opcodes and the runtime arguments for each. Used by the AML
+ * All AML opcodes and the runtime arguments for each. Used by the AML
* interpreter Each list is compressed into a 32-bit number and stored
* in the master opcode table (in psopcode.c).
*
diff --git a/drivers/acpi/acpica/acparser.h b/drivers/acpi/acpica/acparser.h
index b725d78..eefcf47 100644
--- a/drivers/acpi/acpica/acparser.h
+++ b/drivers/acpi/acpica/acparser.h
@@ -150,8 +150,7 @@
void
acpi_ps_pop_scope(struct acpi_parse_state *parser_state,
- union acpi_parse_object **op,
- u32 * arg_list, u32 * arg_count);
+ union acpi_parse_object **op, u32 *arg_list, u32 *arg_count);
acpi_status
acpi_ps_push_scope(struct acpi_parse_state *parser_state,
diff --git a/drivers/acpi/acpica/acpredef.h b/drivers/acpi/acpica/acpredef.h
index 3080c01..9dfa1c8 100644
--- a/drivers/acpi/acpica/acpredef.h
+++ b/drivers/acpi/acpica/acpredef.h
@@ -150,8 +150,7 @@
* is saved here (rather than in a separate table) in order to minimize the
* overall size of the stored data.
*/
-static const union acpi_predefined_info predefined_names[] =
-{
+static const union acpi_predefined_info predefined_names[] = {
{{"_AC0", 0, ACPI_RTYPE_INTEGER}},
{{"_AC1", 0, ACPI_RTYPE_INTEGER}},
{{"_AC2", 0, ACPI_RTYPE_INTEGER}},
@@ -538,7 +537,8 @@
/* Acpi 1.0 defined _WAK with no return value. Later, it was changed to return a package */
- {{"_WAK", 1, ACPI_RTYPE_NONE | ACPI_RTYPE_INTEGER | ACPI_RTYPE_PACKAGE}},
+ {{"_WAK", 1,
+ ACPI_RTYPE_NONE | ACPI_RTYPE_INTEGER | ACPI_RTYPE_PACKAGE}},
{{{ACPI_PTYPE1_FIXED, ACPI_RTYPE_INTEGER, 2,0}, 0,0}}, /* Fixed-length (2 Int), but is optional */
/* _WDG/_WED are MS extensions defined by "Windows Instrumentation" */
@@ -551,11 +551,12 @@
};
#if 0
+
/* This is an internally implemented control method, no need to check */
- {{"_OSI", 1, ACPI_RTYPE_INTEGER}},
+{ {
+"_OSI", 1, ACPI_RTYPE_INTEGER}},
/* TBD: */
-
_PRT - currently ignore reversed entries. attempt to fix here?
think about possibly fixing package elements like _BIF, etc.
#endif
diff --git a/drivers/acpi/acpica/acstruct.h b/drivers/acpi/acpica/acstruct.h
index f196e2c..937e66c 100644
--- a/drivers/acpi/acpica/acstruct.h
+++ b/drivers/acpi/acpica/acstruct.h
@@ -53,7 +53,7 @@
****************************************************************************/
/*
- * Walk state - current state of a parse tree walk. Used for both a leisurely
+ * Walk state - current state of a parse tree walk. Used for both a leisurely
* stroll through the tree (for whatever reason), and for control method
* execution.
*/
diff --git a/drivers/acpi/acpica/acutils.h b/drivers/acpi/acpica/acutils.h
index 5035327..b0f5f92 100644
--- a/drivers/acpi/acpica/acutils.h
+++ b/drivers/acpi/acpica/acutils.h
@@ -69,6 +69,22 @@
extern const char *acpi_gbl_trs_decode[];
extern const char *acpi_gbl_ttp_decode[];
extern const char *acpi_gbl_typ_decode[];
+extern const char *acpi_gbl_ppc_decode[];
+extern const char *acpi_gbl_ior_decode[];
+extern const char *acpi_gbl_dts_decode[];
+extern const char *acpi_gbl_ct_decode[];
+extern const char *acpi_gbl_sbt_decode[];
+extern const char *acpi_gbl_am_decode[];
+extern const char *acpi_gbl_sm_decode[];
+extern const char *acpi_gbl_wm_decode[];
+extern const char *acpi_gbl_cph_decode[];
+extern const char *acpi_gbl_cpo_decode[];
+extern const char *acpi_gbl_dp_decode[];
+extern const char *acpi_gbl_ed_decode[];
+extern const char *acpi_gbl_bpb_decode[];
+extern const char *acpi_gbl_sb_decode[];
+extern const char *acpi_gbl_fc_decode[];
+extern const char *acpi_gbl_pt_decode[];
#endif
/* Types for Resource descriptor entries */
@@ -79,14 +95,14 @@
#define ACPI_SMALL_VARIABLE_LENGTH 3
typedef
-acpi_status(*acpi_walk_aml_callback) (u8 * aml,
+acpi_status(*acpi_walk_aml_callback) (u8 *aml,
u32 length,
u32 offset,
u8 resource_index, void **context);
typedef
acpi_status(*acpi_pkg_callback) (u8 object_type,
- union acpi_operand_object * source_object,
+ union acpi_operand_object *source_object,
union acpi_generic_state * state,
void *context);
@@ -202,7 +218,9 @@
#define ACPI_IS_PRINT(c) (_acpi_ctype[(unsigned char)(c)] & (_ACPI_LO | _ACPI_UP | _ACPI_DI | _ACPI_SP | _ACPI_PU))
#define ACPI_IS_ALPHA(c) (_acpi_ctype[(unsigned char)(c)] & (_ACPI_LO | _ACPI_UP))
-#endif /* ACPI_USE_SYSTEM_CLIBRARY */
+#endif /* !ACPI_USE_SYSTEM_CLIBRARY */
+
+#define ACPI_IS_ASCII(c) ((c) < 0x80)
/*
* utcopy - Object construction and conversion interfaces
@@ -210,11 +228,11 @@
acpi_status
acpi_ut_build_simple_object(union acpi_operand_object *obj,
union acpi_object *user_obj,
- u8 * data_space, u32 * buffer_space_used);
+ u8 *data_space, u32 *buffer_space_used);
acpi_status
acpi_ut_build_package_object(union acpi_operand_object *obj,
- u8 * buffer, u32 * space_used);
+ u8 *buffer, u32 *space_used);
acpi_status
acpi_ut_copy_iobject_to_eobject(union acpi_operand_object *obj,
@@ -287,9 +305,10 @@
const char *function_name,
const char *module_name, u32 component_id, u8 *ptr);
-void acpi_ut_dump_buffer(u8 * buffer, u32 count, u32 display, u32 component_id);
+void
+acpi_ut_debug_dump_buffer(u8 *buffer, u32 count, u32 display, u32 component_id);
-void acpi_ut_dump_buffer2(u8 * buffer, u32 count, u32 display);
+void acpi_ut_dump_buffer(u8 *buffer, u32 count, u32 display, u32 offset);
void acpi_ut_report_error(char *module_name, u32 line_number);
@@ -337,15 +356,19 @@
*/
acpi_status
acpi_ut_execute_HID(struct acpi_namespace_node *device_node,
- struct acpica_device_id **return_id);
+ struct acpi_pnp_device_id ** return_id);
acpi_status
acpi_ut_execute_UID(struct acpi_namespace_node *device_node,
- struct acpica_device_id **return_id);
+ struct acpi_pnp_device_id ** return_id);
+
+acpi_status
+acpi_ut_execute_SUB(struct acpi_namespace_node *device_node,
+ struct acpi_pnp_device_id **return_id);
acpi_status
acpi_ut_execute_CID(struct acpi_namespace_node *device_node,
- struct acpica_device_id_list **return_cid_list);
+ struct acpi_pnp_device_id_list ** return_cid_list);
/*
* utlock - reader/writer locks
@@ -479,15 +502,19 @@
void acpi_ut_strupr(char *src_string);
+void acpi_ut_strlwr(char *src_string);
+
+int acpi_ut_stricmp(char *string1, char *string2);
+
void acpi_ut_print_string(char *string, u8 max_length);
u8 acpi_ut_valid_acpi_name(u32 name);
-acpi_name acpi_ut_repair_name(char *name);
+void acpi_ut_repair_name(char *name);
u8 acpi_ut_valid_acpi_char(char character, u32 position);
-acpi_status acpi_ut_strtoul64(char *string, u32 base, u64 * ret_integer);
+acpi_status acpi_ut_strtoul64(char *string, u32 base, u64 *ret_integer);
/* Values for Base above (16=Hex, 10=Decimal) */
@@ -508,12 +535,12 @@
* utresrc
*/
acpi_status
-acpi_ut_walk_aml_resources(u8 * aml,
+acpi_ut_walk_aml_resources(u8 *aml,
acpi_size aml_length,
acpi_walk_aml_callback user_function,
void **context);
-acpi_status acpi_ut_validate_resource(void *aml, u8 * return_index);
+acpi_status acpi_ut_validate_resource(void *aml, u8 *return_index);
u32 acpi_ut_get_descriptor_length(void *aml);
@@ -524,8 +551,7 @@
u8 acpi_ut_get_resource_type(void *aml);
acpi_status
-acpi_ut_get_resource_end_tag(union acpi_operand_object *obj_desc,
- u8 ** end_tag);
+acpi_ut_get_resource_end_tag(union acpi_operand_object *obj_desc, u8 **end_tag);
/*
* utmutex - mutex support
diff --git a/drivers/acpi/acpica/amlresrc.h b/drivers/acpi/acpica/amlresrc.h
index af49479..9684496 100644
--- a/drivers/acpi/acpica/amlresrc.h
+++ b/drivers/acpi/acpica/amlresrc.h
@@ -1,4 +1,3 @@
-
/******************************************************************************
*
* Module Name: amlresrc.h - AML resource descriptors
diff --git a/drivers/acpi/acpica/dscontrol.c b/drivers/acpi/acpica/dscontrol.c
index 465f021..57895db 100644
--- a/drivers/acpi/acpica/dscontrol.c
+++ b/drivers/acpi/acpica/dscontrol.c
@@ -280,7 +280,7 @@
/*
* Get the return value and save as the last result
- * value. This is the only place where walk_state->return_desc
+ * value. This is the only place where walk_state->return_desc
* is set to anything other than zero!
*/
walk_state->return_desc = walk_state->operands[0];
diff --git a/drivers/acpi/acpica/dsfield.c b/drivers/acpi/acpica/dsfield.c
index 3da6fd8..b5b904e 100644
--- a/drivers/acpi/acpica/dsfield.c
+++ b/drivers/acpi/acpica/dsfield.c
@@ -277,7 +277,7 @@
*
* RETURN: Status
*
- * DESCRIPTION: Process all named fields in a field declaration. Names are
+ * DESCRIPTION: Process all named fields in a field declaration. Names are
* entered into the namespace.
*
******************************************************************************/
diff --git a/drivers/acpi/acpica/dsmethod.c b/drivers/acpi/acpica/dsmethod.c
index aa9a5d4..52eb4e0 100644
--- a/drivers/acpi/acpica/dsmethod.c
+++ b/drivers/acpi/acpica/dsmethod.c
@@ -170,7 +170,7 @@
*
* RETURN: Status
*
- * DESCRIPTION: Prepare a method for execution. Parses the method if necessary,
+ * DESCRIPTION: Prepare a method for execution. Parses the method if necessary,
* increments the thread count, and waits at the method semaphore
* for clearance to execute.
*
@@ -444,7 +444,7 @@
* RETURN: Status
*
* DESCRIPTION: Restart a method that was preempted by another (nested) method
- * invocation. Handle the return value (if any) from the callee.
+ * invocation. Handle the return value (if any) from the callee.
*
******************************************************************************/
@@ -530,7 +530,7 @@
*
* RETURN: None
*
- * DESCRIPTION: Terminate a control method. Delete everything that the method
+ * DESCRIPTION: Terminate a control method. Delete everything that the method
* created, delete all locals and arguments, and delete the parse
* tree if requested.
*
diff --git a/drivers/acpi/acpica/dsmthdat.c b/drivers/acpi/acpica/dsmthdat.c
index 8d55ceb..9a83b7e 100644
--- a/drivers/acpi/acpica/dsmthdat.c
+++ b/drivers/acpi/acpica/dsmthdat.c
@@ -76,7 +76,7 @@
* RETURN: Status
*
* DESCRIPTION: Initialize the data structures that hold the method's arguments
- * and locals. The data struct is an array of namespace nodes for
+ * and locals. The data struct is an array of namespace nodes for
* each - this allows ref_of and de_ref_of to work properly for these
* special data types.
*
@@ -129,7 +129,7 @@
*
* RETURN: None
*
- * DESCRIPTION: Delete method locals and arguments. Arguments are only
+ * DESCRIPTION: Delete method locals and arguments. Arguments are only
* deleted if this method was called from another method.
*
******************************************************************************/
@@ -183,7 +183,7 @@
*
* RETURN: Status
*
- * DESCRIPTION: Initialize arguments for a method. The parameter list is a list
+ * DESCRIPTION: Initialize arguments for a method. The parameter list is a list
* of ACPI operand objects, either null terminated or whose length
* is defined by max_param_count.
*
@@ -401,7 +401,7 @@
* This means that either 1) The expected argument was
* not passed to the method, or 2) A local variable
* was referenced by the method (via the ASL)
- * before it was initialized. Either case is an error.
+ * before it was initialized. Either case is an error.
*/
/* If slack enabled, init the local_x/arg_x to an Integer of value zero */
@@ -465,7 +465,7 @@
*
* RETURN: None
*
- * DESCRIPTION: Delete the entry at Opcode:Index. Inserts
+ * DESCRIPTION: Delete the entry at Opcode:Index. Inserts
* a null into the stack slot after the object is deleted.
*
******************************************************************************/
@@ -523,7 +523,7 @@
*
* RETURN: Status
*
- * DESCRIPTION: Store a value in an Arg or Local. The obj_desc is installed
+ * DESCRIPTION: Store a value in an Arg or Local. The obj_desc is installed
* as the new value for the Arg or Local and the reference count
* for obj_desc is incremented.
*
@@ -566,7 +566,7 @@
/*
* If the reference count on the object is more than one, we must
- * take a copy of the object before we store. A reference count
+ * take a copy of the object before we store. A reference count
* of exactly 1 means that the object was just created during the
* evaluation of an expression, and we can safely use it since it
* is not used anywhere else.
diff --git a/drivers/acpi/acpica/dsobject.c b/drivers/acpi/acpica/dsobject.c
index 68592dd..c9f15d3 100644
--- a/drivers/acpi/acpica/dsobject.c
+++ b/drivers/acpi/acpica/dsobject.c
@@ -293,7 +293,7 @@
/*
* Second arg is the buffer data (optional) byte_list can be either
- * individual bytes or a string initializer. In either case, a
+ * individual bytes or a string initializer. In either case, a
* byte_list appears in the AML.
*/
arg = op->common.value.arg; /* skip first arg */
@@ -568,7 +568,7 @@
/*
* Because of the execution pass through the non-control-method
- * parts of the table, we can arrive here twice. Only init
+ * parts of the table, we can arrive here twice. Only init
* the named object node the first time through
*/
if (acpi_ns_get_attached_object(node)) {
@@ -618,7 +618,7 @@
* RETURN: Status
*
* DESCRIPTION: Initialize a namespace object from a parser Op and its
- * associated arguments. The namespace object is a more compact
+ * associated arguments. The namespace object is a more compact
* representation of the Op and its arguments.
*
******************************************************************************/
diff --git a/drivers/acpi/acpica/dsopcode.c b/drivers/acpi/acpica/dsopcode.c
index aa34d89..0df024e 100644
--- a/drivers/acpi/acpica/dsopcode.c
+++ b/drivers/acpi/acpica/dsopcode.c
@@ -649,7 +649,8 @@
((op->common.parent->common.aml_opcode != AML_PACKAGE_OP) &&
(op->common.parent->common.aml_opcode !=
AML_VAR_PACKAGE_OP)
- && (op->common.parent->common.aml_opcode != AML_NAME_OP))) {
+ && (op->common.parent->common.aml_opcode !=
+ AML_NAME_OP))) {
walk_state->result_obj = obj_desc;
}
}
diff --git a/drivers/acpi/acpica/dsutils.c b/drivers/acpi/acpica/dsutils.c
index 73a5447..afeb99f 100644
--- a/drivers/acpi/acpica/dsutils.c
+++ b/drivers/acpi/acpica/dsutils.c
@@ -61,7 +61,7 @@
*
* RETURN: None.
*
- * DESCRIPTION: Clear and remove a reference on an implicit return value. Used
+ * DESCRIPTION: Clear and remove a reference on an implicit return value. Used
* to delete "stale" return values (if enabled, the return value
* from every operator is saved at least momentarily, in case the
* parent method exits.)
@@ -107,7 +107,7 @@
*
* DESCRIPTION: Implements the optional "implicit return". We save the result
* of every ASL operator and control method invocation in case the
- * parent method exit. Before storing a new return value, we
+ * parent method exit. Before storing a new return value, we
* delete the previous return value.
*
******************************************************************************/
@@ -198,7 +198,7 @@
*
* If there is no parent, or the parent is a scope_op, we are executing
* at the method level. An executing method typically has no parent,
- * since each method is parsed separately. A method invoked externally
+ * since each method is parsed separately. A method invoked externally
* via execute_control_method has a scope_op as the parent.
*/
if ((!op->common.parent) ||
@@ -223,7 +223,7 @@
}
/*
- * Decide what to do with the result based on the parent. If
+ * Decide what to do with the result based on the parent. If
* the parent opcode will not use the result, delete the object.
* Otherwise leave it as is, it will be deleted when it is used
* as an operand later.
@@ -266,7 +266,7 @@
/*
* These opcodes allow term_arg(s) as operands and therefore
- * the operands can be method calls. The result is used.
+ * the operands can be method calls. The result is used.
*/
goto result_used;
@@ -284,7 +284,7 @@
AML_BANK_FIELD_OP)) {
/*
* These opcodes allow term_arg(s) as operands and therefore
- * the operands can be method calls. The result is used.
+ * the operands can be method calls. The result is used.
*/
goto result_used;
}
@@ -329,9 +329,9 @@
*
* RETURN: Status
*
- * DESCRIPTION: Used after interpretation of an opcode. If there is an internal
+ * DESCRIPTION: Used after interpretation of an opcode. If there is an internal
* result descriptor, check if the parent opcode will actually use
- * this result. If not, delete the result now so that it will
+ * this result. If not, delete the result now so that it will
* not become orphaned.
*
******************************************************************************/
@@ -376,7 +376,7 @@
*
* RETURN: Status
*
- * DESCRIPTION: Resolve all operands to their values. Used to prepare
+ * DESCRIPTION: Resolve all operands to their values. Used to prepare
* arguments to a control method invocation (a call from one
* method to another.)
*
@@ -391,7 +391,7 @@
/*
* Attempt to resolve each of the valid operands
- * Method arguments are passed by reference, not by value. This means
+ * Method arguments are passed by reference, not by value. This means
* that the actual objects are passed, not copies of the objects.
*/
for (i = 0; i < walk_state->num_operands; i++) {
@@ -451,7 +451,7 @@
* RETURN: Status
*
* DESCRIPTION: Translate a parse tree object that is an argument to an AML
- * opcode to the equivalent interpreter object. This may include
+ * opcode to the equivalent interpreter object. This may include
* looking up a name or entering a new name into the internal
* namespace.
*
@@ -496,9 +496,9 @@
/*
* Special handling for buffer_field declarations. This is a deferred
* opcode that unfortunately defines the field name as the last
- * parameter instead of the first. We get here when we are performing
+ * parameter instead of the first. We get here when we are performing
* the deferred execution, so the actual name of the field is already
- * in the namespace. We don't want to attempt to look it up again
+ * in the namespace. We don't want to attempt to look it up again
* because we may be executing in a different scope than where the
* actual opcode exists.
*/
@@ -560,7 +560,8 @@
* indicate this to the interpreter, set the
* object to the root
*/
- obj_desc = ACPI_CAST_PTR(union
+ obj_desc =
+ ACPI_CAST_PTR(union
acpi_operand_object,
acpi_gbl_root_node);
status = AE_OK;
@@ -604,8 +605,8 @@
/*
* If the name is null, this means that this is an
* optional result parameter that was not specified
- * in the original ASL. Create a Zero Constant for a
- * placeholder. (Store to a constant is a Noop.)
+ * in the original ASL. Create a Zero Constant for a
+ * placeholder. (Store to a constant is a Noop.)
*/
opcode = AML_ZERO_OP; /* Has no arguments! */
diff --git a/drivers/acpi/acpica/dswexec.c b/drivers/acpi/acpica/dswexec.c
index 642f3c0..5859393 100644
--- a/drivers/acpi/acpica/dswexec.c
+++ b/drivers/acpi/acpica/dswexec.c
@@ -57,7 +57,7 @@
/*
* Dispatch table for opcode classes
*/
-static ACPI_EXECUTE_OP acpi_gbl_op_type_dispatch[] = {
+static acpi_execute_op acpi_gbl_op_type_dispatch[] = {
acpi_ex_opcode_0A_0T_1R,
acpi_ex_opcode_1A_0T_0R,
acpi_ex_opcode_1A_0T_1R,
@@ -204,7 +204,7 @@
* RETURN: Status
*
* DESCRIPTION: Descending callback used during the execution of control
- * methods. This is where most operators and operands are
+ * methods. This is where most operators and operands are
* dispatched to the interpreter.
*
****************************************************************************/
@@ -297,7 +297,7 @@
if (walk_state->walk_type & ACPI_WALK_METHOD) {
/*
* Found a named object declaration during method execution;
- * we must enter this object into the namespace. The created
+ * we must enter this object into the namespace. The created
* object is temporary and will be deleted upon completion of
* the execution of this method.
*
@@ -348,7 +348,7 @@
* RETURN: Status
*
* DESCRIPTION: Ascending callback used during the execution of control
- * methods. The only thing we really need to do here is to
+ * methods. The only thing we really need to do here is to
* notice the beginning of IF, ELSE, and WHILE blocks.
*
****************************************************************************/
@@ -432,7 +432,7 @@
if (ACPI_SUCCESS(status)) {
/*
* Dispatch the request to the appropriate interpreter handler
- * routine. There is one routine per opcode "type" based upon the
+ * routine. There is one routine per opcode "type" based upon the
* number of opcode arguments and return type.
*/
status =
diff --git a/drivers/acpi/acpica/dswload2.c b/drivers/acpi/acpica/dswload2.c
index 89c0114..3798357 100644
--- a/drivers/acpi/acpica/dswload2.c
+++ b/drivers/acpi/acpica/dswload2.c
@@ -254,7 +254,7 @@
acpi_ut_get_type_name(node->type),
acpi_ut_get_node_name(node)));
- return (AE_AML_OPERAND_TYPE);
+ return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
}
break;
@@ -602,7 +602,7 @@
region_space,
walk_state);
if (ACPI_FAILURE(status)) {
- return (status);
+ return_ACPI_STATUS(status);
}
acpi_ex_exit_interpreter();
diff --git a/drivers/acpi/acpica/dswstate.c b/drivers/acpi/acpica/dswstate.c
index d0e6555..3e65a15 100644
--- a/drivers/acpi/acpica/dswstate.c
+++ b/drivers/acpi/acpica/dswstate.c
@@ -51,8 +51,9 @@
ACPI_MODULE_NAME("dswstate")
/* Local prototypes */
-static acpi_status acpi_ds_result_stack_push(struct acpi_walk_state *ws);
-static acpi_status acpi_ds_result_stack_pop(struct acpi_walk_state *ws);
+static acpi_status
+acpi_ds_result_stack_push(struct acpi_walk_state *walk_state);
+static acpi_status acpi_ds_result_stack_pop(struct acpi_walk_state *walk_state);
/*******************************************************************************
*
@@ -347,7 +348,7 @@
*
* RETURN: Status
*
- * DESCRIPTION: Pop this walk's object stack. Objects on the stack are NOT
+ * DESCRIPTION: Pop this walk's object stack. Objects on the stack are NOT
* deleted by this routine.
*
******************************************************************************/
@@ -491,7 +492,7 @@
* RETURN: A walk_state object popped from the thread's stack
*
* DESCRIPTION: Remove and return the walkstate object that is at the head of
- * the walk stack for the given walk list. NULL indicates that
+ * the walk stack for the given walk list. NULL indicates that
* the list is empty.
*
******************************************************************************/
@@ -531,14 +532,17 @@
*
* RETURN: Pointer to the new walk state.
*
- * DESCRIPTION: Allocate and initialize a new walk state. The current walk
+ * DESCRIPTION: Allocate and initialize a new walk state. The current walk
* state is set to this new state.
*
******************************************************************************/
-struct acpi_walk_state *acpi_ds_create_walk_state(acpi_owner_id owner_id, union acpi_parse_object
- *origin, union acpi_operand_object
- *method_desc, struct acpi_thread_state
+struct acpi_walk_state *acpi_ds_create_walk_state(acpi_owner_id owner_id,
+ union acpi_parse_object
+ *origin,
+ union acpi_operand_object
+ *method_desc,
+ struct acpi_thread_state
*thread)
{
struct acpi_walk_state *walk_state;
@@ -653,7 +657,7 @@
/*
* Setup the current scope.
* Find a Named Op that has a namespace node associated with it.
- * search upwards from this Op. Current scope is the first
+ * search upwards from this Op. Current scope is the first
* Op with a namespace node.
*/
extra_op = parser_state->start_op;
@@ -704,13 +708,13 @@
ACPI_FUNCTION_TRACE_PTR(ds_delete_walk_state, walk_state);
if (!walk_state) {
- return;
+ return_VOID;
}
if (walk_state->descriptor_type != ACPI_DESC_TYPE_WALK) {
ACPI_ERROR((AE_INFO, "%p is not a valid walk state",
walk_state));
- return;
+ return_VOID;
}
/* There should not be any open scopes */
diff --git a/drivers/acpi/acpica/evgpe.c b/drivers/acpi/acpica/evgpe.c
index ef0193d..36d1205 100644
--- a/drivers/acpi/acpica/evgpe.c
+++ b/drivers/acpi/acpica/evgpe.c
@@ -89,7 +89,8 @@
/* Set the mask bit only if there are references to this GPE */
if (gpe_event_info->runtime_count) {
- ACPI_SET_BIT(gpe_register_info->enable_for_run, (u8)register_bit);
+ ACPI_SET_BIT(gpe_register_info->enable_for_run,
+ (u8)register_bit);
}
return_ACPI_STATUS(AE_OK);
@@ -106,8 +107,7 @@
* DESCRIPTION: Clear a GPE of stale events and enable it.
*
******************************************************************************/
-acpi_status
-acpi_ev_enable_gpe(struct acpi_gpe_event_info *gpe_event_info)
+acpi_status acpi_ev_enable_gpe(struct acpi_gpe_event_info *gpe_event_info)
{
acpi_status status;
@@ -131,8 +131,8 @@
}
/* Enable the requested GPE */
- status = acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_ENABLE);
+ status = acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_ENABLE);
return_ACPI_STATUS(status);
}
@@ -150,7 +150,8 @@
*
******************************************************************************/
-acpi_status acpi_ev_add_gpe_reference(struct acpi_gpe_event_info *gpe_event_info)
+acpi_status
+acpi_ev_add_gpe_reference(struct acpi_gpe_event_info *gpe_event_info)
{
acpi_status status = AE_OK;
@@ -191,7 +192,8 @@
*
******************************************************************************/
-acpi_status acpi_ev_remove_gpe_reference(struct acpi_gpe_event_info *gpe_event_info)
+acpi_status
+acpi_ev_remove_gpe_reference(struct acpi_gpe_event_info *gpe_event_info)
{
acpi_status status = AE_OK;
@@ -208,7 +210,8 @@
status = acpi_ev_update_gpe_enable_mask(gpe_event_info);
if (ACPI_SUCCESS(status)) {
- status = acpi_hw_low_set_gpe(gpe_event_info,
+ status =
+ acpi_hw_low_set_gpe(gpe_event_info,
ACPI_GPE_DISABLE);
}
@@ -306,7 +309,8 @@
/* A Non-NULL gpe_device means this is a GPE Block Device */
- obj_desc = acpi_ns_get_attached_object((struct acpi_namespace_node *)
+ obj_desc =
+ acpi_ns_get_attached_object((struct acpi_namespace_node *)
gpe_device);
if (!obj_desc || !obj_desc->device.gpe_block) {
return (NULL);
diff --git a/drivers/acpi/acpica/evgpeblk.c b/drivers/acpi/acpica/evgpeblk.c
index 8cf4c10..1571a61 100644
--- a/drivers/acpi/acpica/evgpeblk.c
+++ b/drivers/acpi/acpica/evgpeblk.c
@@ -486,7 +486,8 @@
if (ACPI_FAILURE(status)) {
ACPI_EXCEPTION((AE_INFO, status,
"Could not enable GPE 0x%02X",
- gpe_index + gpe_block->block_base_number));
+ gpe_index +
+ gpe_block->block_base_number));
continue;
}
diff --git a/drivers/acpi/acpica/evgpeutil.c b/drivers/acpi/acpica/evgpeutil.c
index cb50dd9..228a0c3 100644
--- a/drivers/acpi/acpica/evgpeutil.c
+++ b/drivers/acpi/acpica/evgpeutil.c
@@ -374,7 +374,8 @@
gpe_event_info->dispatch.handler = NULL;
gpe_event_info->flags &=
~ACPI_GPE_DISPATCH_MASK;
- } else if ((gpe_event_info->
+ } else
+ if ((gpe_event_info->
flags & ACPI_GPE_DISPATCH_MASK) ==
ACPI_GPE_DISPATCH_NOTIFY) {
diff --git a/drivers/acpi/acpica/evrgnini.c b/drivers/acpi/acpica/evrgnini.c
index 4c1c826..1474241 100644
--- a/drivers/acpi/acpica/evrgnini.c
+++ b/drivers/acpi/acpica/evrgnini.c
@@ -227,8 +227,7 @@
/* Install a handler for this PCI root bridge */
- status =
- acpi_install_address_space_handler((acpi_handle) pci_root_node, ACPI_ADR_SPACE_PCI_CONFIG, ACPI_DEFAULT_HANDLER, NULL, NULL);
+ status = acpi_install_address_space_handler((acpi_handle) pci_root_node, ACPI_ADR_SPACE_PCI_CONFIG, ACPI_DEFAULT_HANDLER, NULL, NULL);
if (ACPI_FAILURE(status)) {
if (status == AE_SAME_HANDLER) {
/*
@@ -350,8 +349,8 @@
static u8 acpi_ev_is_pci_root_bridge(struct acpi_namespace_node *node)
{
acpi_status status;
- struct acpica_device_id *hid;
- struct acpica_device_id_list *cid;
+ struct acpi_pnp_device_id *hid;
+ struct acpi_pnp_device_id_list *cid;
u32 i;
u8 match;
diff --git a/drivers/acpi/acpica/evxface.c b/drivers/acpi/acpica/evxface.c
index 7587eb6..ae668f3 100644
--- a/drivers/acpi/acpica/evxface.c
+++ b/drivers/acpi/acpica/evxface.c
@@ -398,7 +398,7 @@
*
******************************************************************************/
acpi_status
-acpi_install_global_event_handler(ACPI_GBL_EVENT_HANDLER handler, void *context)
+acpi_install_global_event_handler(acpi_gbl_event_handler handler, void *context)
{
acpi_status status;
diff --git a/drivers/acpi/acpica/evxfgpe.c b/drivers/acpi/acpica/evxfgpe.c
index 87c5f23..3f30e75 100644
--- a/drivers/acpi/acpica/evxfgpe.c
+++ b/drivers/acpi/acpica/evxfgpe.c
@@ -221,7 +221,8 @@
if (wake_device == ACPI_ROOT_OBJECT) {
device_node = acpi_gbl_root_node;
} else {
- device_node = ACPI_CAST_PTR(struct acpi_namespace_node, wake_device);
+ device_node =
+ ACPI_CAST_PTR(struct acpi_namespace_node, wake_device);
}
/* Validate WakeDevice is of type Device */
@@ -324,7 +325,8 @@
*
******************************************************************************/
-acpi_status acpi_set_gpe_wake_mask(acpi_handle gpe_device, u32 gpe_number, u8 action)
+acpi_status
+acpi_set_gpe_wake_mask(acpi_handle gpe_device, u32 gpe_number, u8 action)
{
acpi_status status = AE_OK;
struct acpi_gpe_event_info *gpe_event_info;
@@ -567,7 +569,7 @@
status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
if (ACPI_FAILURE(status)) {
- return (status);
+ return_ACPI_STATUS(status);
}
node = acpi_ns_validate_handle(gpe_device);
@@ -650,7 +652,7 @@
status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
if (ACPI_FAILURE(status)) {
- return (status);
+ return_ACPI_STATUS(status);
}
node = acpi_ns_validate_handle(gpe_device);
@@ -694,8 +696,7 @@
* the FADT-defined gpe blocks. Otherwise, the GPE block device.
*
******************************************************************************/
-acpi_status
-acpi_get_gpe_device(u32 index, acpi_handle *gpe_device)
+acpi_status acpi_get_gpe_device(u32 index, acpi_handle * gpe_device)
{
struct acpi_gpe_device_info info;
acpi_status status;
diff --git a/drivers/acpi/acpica/exconvrt.c b/drivers/acpi/acpica/exconvrt.c
index bfb062e..4492a4e 100644
--- a/drivers/acpi/acpica/exconvrt.c
+++ b/drivers/acpi/acpica/exconvrt.c
@@ -516,8 +516,8 @@
string_length--;
}
- return_desc = acpi_ut_create_string_object((acpi_size)
- string_length);
+ return_desc =
+ acpi_ut_create_string_object((acpi_size) string_length);
if (!return_desc) {
return_ACPI_STATUS(AE_NO_MEMORY);
}
diff --git a/drivers/acpi/acpica/excreate.c b/drivers/acpi/acpica/excreate.c
index 691d476..66554bc 100644
--- a/drivers/acpi/acpica/excreate.c
+++ b/drivers/acpi/acpica/excreate.c
@@ -78,7 +78,7 @@
(target_node->type == ACPI_TYPE_LOCAL_METHOD_ALIAS)) {
/*
* Dereference an existing alias so that we don't create a chain
- * of aliases. With this code, we guarantee that an alias is
+ * of aliases. With this code, we guarantee that an alias is
* always exactly one level of indirection away from the
* actual aliased name.
*/
@@ -90,7 +90,7 @@
/*
* For objects that can never change (i.e., the NS node will
* permanently point to the same object), we can simply attach
- * the object to the new NS node. For other objects (such as
+ * the object to the new NS node. For other objects (such as
* Integers, buffers, etc.), we have to point the Alias node
* to the original Node.
*/
@@ -139,7 +139,7 @@
/*
* The new alias assumes the type of the target, and it points
- * to the same object. The reference count of the object has an
+ * to the same object. The reference count of the object has an
* additional reference to prevent deletion out from under either the
* target node or the alias Node
*/
@@ -243,8 +243,7 @@
/* Init object and attach to NS node */
- obj_desc->mutex.sync_level =
- (u8) walk_state->operands[1]->integer.value;
+ obj_desc->mutex.sync_level = (u8)walk_state->operands[1]->integer.value;
obj_desc->mutex.node =
(struct acpi_namespace_node *)walk_state->operands[0];
diff --git a/drivers/acpi/acpica/exdebug.c b/drivers/acpi/acpica/exdebug.c
index bc5b9a6a..d7c9f51 100644
--- a/drivers/acpi/acpica/exdebug.c
+++ b/drivers/acpi/acpica/exdebug.c
@@ -145,10 +145,10 @@
case ACPI_TYPE_BUFFER:
acpi_os_printf("[0x%.2X]\n", (u32)source_desc->buffer.length);
- acpi_ut_dump_buffer2(source_desc->buffer.pointer,
- (source_desc->buffer.length < 256) ?
- source_desc->buffer.length : 256,
- DB_BYTE_DISPLAY);
+ acpi_ut_dump_buffer(source_desc->buffer.pointer,
+ (source_desc->buffer.length < 256) ?
+ source_desc->buffer.length : 256,
+ DB_BYTE_DISPLAY, 0);
break;
case ACPI_TYPE_STRING:
@@ -190,7 +190,7 @@
acpi_os_printf("Table Index 0x%X\n",
source_desc->reference.value);
- return;
+ return_VOID;
default:
break;
diff --git a/drivers/acpi/acpica/exdump.c b/drivers/acpi/acpica/exdump.c
index 213c081..858b43a 100644
--- a/drivers/acpi/acpica/exdump.c
+++ b/drivers/acpi/acpica/exdump.c
@@ -464,7 +464,8 @@
ACPI_FUNCTION_NAME(ex_dump_operand)
- if (!((ACPI_LV_EXEC & acpi_dbg_level)
+ if (!
+ ((ACPI_LV_EXEC & acpi_dbg_level)
&& (_COMPONENT & acpi_dbg_layer))) {
return;
}
@@ -777,7 +778,7 @@
* PARAMETERS: title - Descriptive text
* value - Value to be displayed
*
- * DESCRIPTION: Object dump output formatting functions. These functions
+ * DESCRIPTION: Object dump output formatting functions. These functions
* reduce the number of format strings required and keeps them
* all in one place for easy modification.
*
@@ -810,7 +811,8 @@
ACPI_FUNCTION_ENTRY();
if (!flags) {
- if (!((ACPI_LV_OBJECTS & acpi_dbg_level)
+ if (!
+ ((ACPI_LV_OBJECTS & acpi_dbg_level)
&& (_COMPONENT & acpi_dbg_layer))) {
return;
}
@@ -940,10 +942,11 @@
acpi_os_printf("[Buffer] Length %.2X = ",
obj_desc->buffer.length);
if (obj_desc->buffer.length) {
- acpi_ut_dump_buffer(ACPI_CAST_PTR
- (u8, obj_desc->buffer.pointer),
- obj_desc->buffer.length,
- DB_DWORD_DISPLAY, _COMPONENT);
+ acpi_ut_debug_dump_buffer(ACPI_CAST_PTR
+ (u8,
+ obj_desc->buffer.pointer),
+ obj_desc->buffer.length,
+ DB_DWORD_DISPLAY, _COMPONENT);
} else {
acpi_os_printf("\n");
}
@@ -996,7 +999,8 @@
}
if (!flags) {
- if (!((ACPI_LV_OBJECTS & acpi_dbg_level)
+ if (!
+ ((ACPI_LV_OBJECTS & acpi_dbg_level)
&& (_COMPONENT & acpi_dbg_layer))) {
return_VOID;
}
diff --git a/drivers/acpi/acpica/exfield.c b/drivers/acpi/acpica/exfield.c
index dc092f5..ebc55fb 100644
--- a/drivers/acpi/acpica/exfield.c
+++ b/drivers/acpi/acpica/exfield.c
@@ -59,7 +59,7 @@
*
* RETURN: Status
*
- * DESCRIPTION: Read from a named field. Returns either an Integer or a
+ * DESCRIPTION: Read from a named field. Returns either an Integer or a
* Buffer, depending on the size of the field.
*
******************************************************************************/
@@ -149,7 +149,7 @@
* Allocate a buffer for the contents of the field.
*
* If the field is larger than the current integer width, create
- * a BUFFER to hold it. Otherwise, use an INTEGER. This allows
+ * a BUFFER to hold it. Otherwise, use an INTEGER. This allows
* the use of arithmetic operators on the returned value if the
* field size is equal or smaller than an Integer.
*
diff --git a/drivers/acpi/acpica/exfldio.c b/drivers/acpi/acpica/exfldio.c
index a778415..aa2ccfb 100644
--- a/drivers/acpi/acpica/exfldio.c
+++ b/drivers/acpi/acpica/exfldio.c
@@ -54,8 +54,7 @@
/* Local prototypes */
static acpi_status
acpi_ex_field_datum_io(union acpi_operand_object *obj_desc,
- u32 field_datum_byte_offset,
- u64 *value, u32 read_write);
+ u32 field_datum_byte_offset, u64 *value, u32 read_write);
static u8
acpi_ex_register_overflow(union acpi_operand_object *obj_desc, u64 value);
@@ -155,7 +154,7 @@
#endif
/*
- * Validate the request. The entire request from the byte offset for a
+ * Validate the request. The entire request from the byte offset for a
* length of one field datum (access width) must fit within the region.
* (Region length is specified in bytes)
*/
@@ -183,7 +182,7 @@
obj_desc->common_field.access_byte_width) {
/*
* This is the case where the access_type (acc_word, etc.) is wider
- * than the region itself. For example, a region of length one
+ * than the region itself. For example, a region of length one
* byte, and a field with Dword access specified.
*/
ACPI_ERROR((AE_INFO,
@@ -321,7 +320,7 @@
*
* DESCRIPTION: Check if a value is out of range of the field being written.
* Used to check if the values written to Index and Bank registers
- * are out of range. Normally, the value is simply truncated
+ * are out of range. Normally, the value is simply truncated
* to fit the field, but this case is most likely a serious
* coding error in the ASL.
*
@@ -370,7 +369,7 @@
*
* RETURN: Status
*
- * DESCRIPTION: Read or Write a single datum of a field. The field_type is
+ * DESCRIPTION: Read or Write a single datum of a field. The field_type is
* demultiplexed here to handle the different types of fields
* (buffer_field, region_field, index_field, bank_field)
*
@@ -860,7 +859,7 @@
ACPI_ROUND_BITS_UP_TO_BYTES(obj_desc->common_field.bit_length);
/*
* We must have a buffer that is at least as long as the field
- * we are writing to. This is because individual fields are
+ * we are writing to. This is because individual fields are
* indivisible and partial writes are not supported -- as per
* the ACPI specification.
*/
@@ -875,7 +874,7 @@
/*
* Copy the original data to the new buffer, starting
- * at Byte zero. All unused (upper) bytes of the
+ * at Byte zero. All unused (upper) bytes of the
* buffer will be 0.
*/
ACPI_MEMCPY((char *)new_buffer, (char *)buffer, buffer_length);
diff --git a/drivers/acpi/acpica/exmisc.c b/drivers/acpi/acpica/exmisc.c
index 271c0c5..8405870 100644
--- a/drivers/acpi/acpica/exmisc.c
+++ b/drivers/acpi/acpica/exmisc.c
@@ -1,4 +1,3 @@
-
/******************************************************************************
*
* Module Name: exmisc - ACPI AML (p-code) execution - specific opcodes
@@ -254,7 +253,7 @@
ACPI_FUNCTION_TRACE(ex_do_concatenate);
/*
- * Convert the second operand if necessary. The first operand
+ * Convert the second operand if necessary. The first operand
* determines the type of the second operand, (See the Data Types
* section of the ACPI specification.) Both object types are
* guaranteed to be either Integer/String/Buffer by the operand
@@ -573,7 +572,7 @@
ACPI_FUNCTION_TRACE(ex_do_logical_op);
/*
- * Convert the second operand if necessary. The first operand
+ * Convert the second operand if necessary. The first operand
* determines the type of the second operand, (See the Data Types
* section of the ACPI 3.0+ specification.) Both object types are
* guaranteed to be either Integer/String/Buffer by the operand
diff --git a/drivers/acpi/acpica/exmutex.c b/drivers/acpi/acpica/exmutex.c
index bcceda5..d1f449d 100644
--- a/drivers/acpi/acpica/exmutex.c
+++ b/drivers/acpi/acpica/exmutex.c
@@ -1,4 +1,3 @@
-
/******************************************************************************
*
* Module Name: exmutex - ASL Mutex Acquire/Release functions
@@ -305,7 +304,7 @@
ACPI_FUNCTION_TRACE(ex_release_mutex_object);
if (obj_desc->mutex.acquisition_depth == 0) {
- return (AE_NOT_ACQUIRED);
+ return_ACPI_STATUS(AE_NOT_ACQUIRED);
}
/* Match multiple Acquires with multiple Releases */
@@ -462,7 +461,7 @@
union acpi_operand_object *next = thread->acquired_mutex_list;
union acpi_operand_object *obj_desc;
- ACPI_FUNCTION_ENTRY();
+ ACPI_FUNCTION_NAME(ex_release_all_mutexes);
/* Traverse the list of owned mutexes, releasing each one */
@@ -474,6 +473,10 @@
obj_desc->mutex.next = NULL;
obj_desc->mutex.acquisition_depth = 0;
+ ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
+ "Force-releasing held mutex: %p\n",
+ obj_desc));
+
/* Release the mutex, special case for Global Lock */
if (obj_desc == acpi_gbl_global_lock_mutex) {
diff --git a/drivers/acpi/acpica/exnames.c b/drivers/acpi/acpica/exnames.c
index fcc75fa..2ff578a 100644
--- a/drivers/acpi/acpica/exnames.c
+++ b/drivers/acpi/acpica/exnames.c
@@ -1,4 +1,3 @@
-
/******************************************************************************
*
* Module Name: exnames - interpreter/scanner name load/execute
@@ -53,8 +52,7 @@
/* Local prototypes */
static char *acpi_ex_allocate_name_string(u32 prefix_count, u32 num_name_segs);
-static acpi_status
-acpi_ex_name_segment(u8 ** in_aml_address, char *name_string);
+static acpi_status acpi_ex_name_segment(u8 **in_aml_address, char *name_string);
/*******************************************************************************
*
@@ -64,7 +62,7 @@
* (-1)==root, 0==none
* num_name_segs - count of 4-character name segments
*
- * RETURN: A pointer to the allocated string segment. This segment must
+ * RETURN: A pointer to the allocated string segment. This segment must
* be deleted by the caller.
*
* DESCRIPTION: Allocate a buffer for a name string. Ensure allocated name
@@ -178,7 +176,8 @@
ACPI_DEBUG_PRINT((ACPI_DB_LOAD, "Bytes from stream:\n"));
- for (index = 0; (index < ACPI_NAME_SIZE)
+ for (index = 0;
+ (index < ACPI_NAME_SIZE)
&& (acpi_ut_valid_acpi_char(*aml_address, 0)); index++) {
char_buf[index] = *aml_address++;
ACPI_DEBUG_PRINT((ACPI_DB_LOAD, "%c\n", char_buf[index]));
diff --git a/drivers/acpi/acpica/exoparg1.c b/drivers/acpi/acpica/exoparg1.c
index 9ba8c73..bbf01e9 100644
--- a/drivers/acpi/acpica/exoparg1.c
+++ b/drivers/acpi/acpica/exoparg1.c
@@ -1,4 +1,3 @@
-
/******************************************************************************
*
* Module Name: exoparg1 - AML execution - opcodes with 1 argument
@@ -606,7 +605,7 @@
}
/*
- * Set result to ONES (TRUE) if Value == 0. Note:
+ * Set result to ONES (TRUE) if Value == 0. Note:
* return_desc->Integer.Value is initially == 0 (FALSE) from above.
*/
if (!operand[0]->integer.value) {
@@ -618,7 +617,7 @@
case AML_INCREMENT_OP: /* Increment (Operand) */
/*
- * Create a new integer. Can't just get the base integer and
+ * Create a new integer. Can't just get the base integer and
* increment it because it may be an Arg or Field.
*/
return_desc = acpi_ut_create_internal_object(ACPI_TYPE_INTEGER);
@@ -686,7 +685,7 @@
/*
* Note: The operand is not resolved at this point because we want to
- * get the associated object, not its value. For example, we don't
+ * get the associated object, not its value. For example, we don't
* want to resolve a field_unit to its value, we want the actual
* field_unit object.
*/
@@ -727,7 +726,7 @@
/*
* The type of the base object must be integer, buffer, string, or
- * package. All others are not supported.
+ * package. All others are not supported.
*
* NOTE: Integer is not specifically supported by the ACPI spec,
* but is supported implicitly via implicit operand conversion.
@@ -965,7 +964,7 @@
case ACPI_TYPE_PACKAGE:
/*
- * Return the referenced element of the package. We must
+ * Return the referenced element of the package. We must
* add another reference to the referenced object, however.
*/
return_desc =
diff --git a/drivers/acpi/acpica/exoparg2.c b/drivers/acpi/acpica/exoparg2.c
index 879e8a2..ee5634a 100644
--- a/drivers/acpi/acpica/exoparg2.c
+++ b/drivers/acpi/acpica/exoparg2.c
@@ -123,7 +123,7 @@
/*
* Dispatch the notify to the appropriate handler
* NOTE: the request is queued for execution after this method
- * completes. The notify handlers are NOT invoked synchronously
+ * completes. The notify handlers are NOT invoked synchronously
* from this thread -- because handlers may in turn run other
* control methods.
*/
diff --git a/drivers/acpi/acpica/exoparg3.c b/drivers/acpi/acpica/exoparg3.c
index 71fcc65..2c89b46 100644
--- a/drivers/acpi/acpica/exoparg3.c
+++ b/drivers/acpi/acpica/exoparg3.c
@@ -1,4 +1,3 @@
-
/******************************************************************************
*
* Module Name: exoparg3 - AML execution - opcodes with 3 arguments
@@ -158,7 +157,7 @@
case AML_MID_OP: /* Mid (Source[0], Index[1], Length[2], Result[3]) */
/*
- * Create the return object. The Source operand is guaranteed to be
+ * Create the return object. The Source operand is guaranteed to be
* either a String or a Buffer, so just use its type.
*/
return_desc = acpi_ut_create_internal_object((operand[0])->
diff --git a/drivers/acpi/acpica/exoparg6.c b/drivers/acpi/acpica/exoparg6.c
index 0786b86..3e08695 100644
--- a/drivers/acpi/acpica/exoparg6.c
+++ b/drivers/acpi/acpica/exoparg6.c
@@ -1,4 +1,3 @@
-
/******************************************************************************
*
* Module Name: exoparg6 - AML execution - opcodes with 6 arguments
@@ -198,7 +197,7 @@
return (FALSE);
}
- return logical_result;
+ return (logical_result);
}
/*******************************************************************************
@@ -269,7 +268,7 @@
* and the next should be examined.
*
* Upon finding a match, the loop will terminate via "break" at
- * the bottom. If it terminates "normally", match_value will be
+ * the bottom. If it terminates "normally", match_value will be
* ACPI_UINT64_MAX (Ones) (its initial value) indicating that no
* match was found.
*/
diff --git a/drivers/acpi/acpica/exprep.c b/drivers/acpi/acpica/exprep.c
index 81eca60..ba9db4d 100644
--- a/drivers/acpi/acpica/exprep.c
+++ b/drivers/acpi/acpica/exprep.c
@@ -1,4 +1,3 @@
-
/******************************************************************************
*
* Module Name: exprep - ACPI AML (p-code) execution - field prep utilities
@@ -78,8 +77,8 @@
* any_acc keyword.
*
* NOTE: Need to have the region_length in order to check for boundary
- * conditions (end-of-region). However, the region_length is a deferred
- * operation. Therefore, to complete this implementation, the generation
+ * conditions (end-of-region). However, the region_length is a deferred
+ * operation. Therefore, to complete this implementation, the generation
* of this access width must be deferred until the region length has
* been evaluated.
*
@@ -308,7 +307,7 @@
* RETURN: Status
*
* DESCRIPTION: Initialize the areas of the field object that are common
- * to the various types of fields. Note: This is very "sensitive"
+ * to the various types of fields. Note: This is very "sensitive"
* code because we are solving the general case for field
* alignment.
*
@@ -336,13 +335,13 @@
obj_desc->common_field.bit_length = field_bit_length;
/*
- * Decode the access type so we can compute offsets. The access type gives
+ * Decode the access type so we can compute offsets. The access type gives
* two pieces of information - the width of each field access and the
* necessary byte_alignment (address granularity) of the access.
*
* For any_acc, the access_bit_width is the largest width that is both
* necessary and possible in an attempt to access the whole field in one
- * I/O operation. However, for any_acc, the byte_alignment is always one
+ * I/O operation. However, for any_acc, the byte_alignment is always one
* byte.
*
* For all Buffer Fields, the byte_alignment is always one byte.
@@ -363,7 +362,7 @@
/*
* base_byte_offset is the address of the start of the field within the
- * region. It is the byte address of the first *datum* (field-width data
+ * region. It is the byte address of the first *datum* (field-width data
* unit) of the field. (i.e., the first datum that contains at least the
* first *bit* of the field.)
*
diff --git a/drivers/acpi/acpica/exregion.c b/drivers/acpi/acpica/exregion.c
index 1f1ce0c..1db2c0b 100644
--- a/drivers/acpi/acpica/exregion.c
+++ b/drivers/acpi/acpica/exregion.c
@@ -1,4 +1,3 @@
-
/******************************************************************************
*
* Module Name: exregion - ACPI default op_region (address space) handlers
@@ -202,7 +201,7 @@
* Perform the memory read or write
*
* Note: For machines that do not support non-aligned transfers, the target
- * address was checked for alignment above. We do not attempt to break the
+ * address was checked for alignment above. We do not attempt to break the
* transfer up into smaller (byte-size) chunks because the AML specifically
* asked for a transfer width that the hardware may require.
*/
diff --git a/drivers/acpi/acpica/exresnte.c b/drivers/acpi/acpica/exresnte.c
index fa50e77..6239956 100644
--- a/drivers/acpi/acpica/exresnte.c
+++ b/drivers/acpi/acpica/exresnte.c
@@ -1,4 +1,3 @@
-
/******************************************************************************
*
* Module Name: exresnte - AML Interpreter object resolution
@@ -58,8 +57,8 @@
* PARAMETERS: object_ptr - Pointer to a location that contains
* a pointer to a NS node, and will receive a
* pointer to the resolved object.
- * walk_state - Current state. Valid only if executing AML
- * code. NULL if simply resolving an object
+ * walk_state - Current state. Valid only if executing AML
+ * code. NULL if simply resolving an object
*
* RETURN: Status
*
@@ -67,7 +66,7 @@
*
* Note: for some of the data types, the pointer attached to the Node
* can be either a pointer to an actual internal object or a pointer into the
- * AML stream itself. These types are currently:
+ * AML stream itself. These types are currently:
*
* ACPI_TYPE_INTEGER
* ACPI_TYPE_STRING
@@ -89,7 +88,7 @@
ACPI_FUNCTION_TRACE(ex_resolve_node_to_value);
/*
- * The stack pointer points to a struct acpi_namespace_node (Node). Get the
+ * The stack pointer points to a struct acpi_namespace_node (Node). Get the
* object that is attached to the Node.
*/
node = *object_ptr;
diff --git a/drivers/acpi/acpica/exresolv.c b/drivers/acpi/acpica/exresolv.c
index bbf40ac..cc176b2 100644
--- a/drivers/acpi/acpica/exresolv.c
+++ b/drivers/acpi/acpica/exresolv.c
@@ -1,4 +1,3 @@
-
/******************************************************************************
*
* Module Name: exresolv - AML Interpreter object resolution
@@ -327,7 +326,7 @@
*
* RETURN: Status
*
- * DESCRIPTION: Return the base object and type. Traverse a reference list if
+ * DESCRIPTION: Return the base object and type. Traverse a reference list if
* necessary to get to the base object.
*
******************************************************************************/
diff --git a/drivers/acpi/acpica/exresop.c b/drivers/acpi/acpica/exresop.c
index f232fba..b9ebff2 100644
--- a/drivers/acpi/acpica/exresop.c
+++ b/drivers/acpi/acpica/exresop.c
@@ -1,4 +1,3 @@
-
/******************************************************************************
*
* Module Name: exresop - AML Interpreter operand/object resolution
@@ -87,7 +86,7 @@
if (type_needed == ACPI_TYPE_LOCAL_REFERENCE) {
/*
* Allow the AML "Constant" opcodes (Zero, One, etc.) to be reference
- * objects and thus allow them to be targets. (As per the ACPI
+ * objects and thus allow them to be targets. (As per the ACPI
* specification, a store to a constant is a noop.)
*/
if ((this_type == ACPI_TYPE_INTEGER) &&
@@ -337,7 +336,8 @@
if ((opcode == AML_STORE_OP) &&
((*stack_ptr)->common.type ==
ACPI_TYPE_LOCAL_REFERENCE)
- && ((*stack_ptr)->reference.class == ACPI_REFCLASS_INDEX)) {
+ && ((*stack_ptr)->reference.class ==
+ ACPI_REFCLASS_INDEX)) {
goto next_operand;
}
break;
@@ -638,7 +638,7 @@
if (acpi_gbl_enable_interpreter_slack) {
/*
* Enable original behavior of Store(), allowing any and all
- * objects as the source operand. The ACPI spec does not
+ * objects as the source operand. The ACPI spec does not
* allow this, however.
*/
break;
diff --git a/drivers/acpi/acpica/exstore.c b/drivers/acpi/acpica/exstore.c
index 5fffe7a..90431f1 100644
--- a/drivers/acpi/acpica/exstore.c
+++ b/drivers/acpi/acpica/exstore.c
@@ -374,7 +374,7 @@
* with the input value.
*
* When storing into an object the data is converted to the
- * target object type then stored in the object. This means
+ * target object type then stored in the object. This means
* that the target object type (for an initialized target) will
* not be changed by a store operation.
*
@@ -491,7 +491,7 @@
acpi_ut_get_object_type_name(source_desc),
source_desc, node));
- /* No conversions for all other types. Just attach the source object */
+ /* No conversions for all other types. Just attach the source object */
status = acpi_ns_attach_object(node, source_desc,
source_desc->common.type);
diff --git a/drivers/acpi/acpica/exstoren.c b/drivers/acpi/acpica/exstoren.c
index b35bed5..87153bb 100644
--- a/drivers/acpi/acpica/exstoren.c
+++ b/drivers/acpi/acpica/exstoren.c
@@ -1,4 +1,3 @@
-
/******************************************************************************
*
* Module Name: exstoren - AML Interpreter object store support,
@@ -61,7 +60,7 @@
*
* RETURN: Status, resolved object in source_desc_ptr.
*
- * DESCRIPTION: Resolve an object. If the object is a reference, dereference
+ * DESCRIPTION: Resolve an object. If the object is a reference, dereference
* it and return the actual object in the source_desc_ptr.
*
******************************************************************************/
@@ -93,7 +92,7 @@
/*
* Stores into a Field/Region or into a Integer/Buffer/String
- * are all essentially the same. This case handles the
+ * are all essentially the same. This case handles the
* "interchangeable" types Integer, String, and Buffer.
*/
if (source_desc->common.type == ACPI_TYPE_LOCAL_REFERENCE) {
@@ -167,7 +166,7 @@
*
* RETURN: Status
*
- * DESCRIPTION: "Store" an object to another object. This may include
+ * DESCRIPTION: "Store" an object to another object. This may include
* converting the source type to the target type (implicit
* conversion), and a copy of the value of the source to
* the target.
@@ -178,14 +177,14 @@
* with the input value.
*
* When storing into an object the data is converted to the
- * target object type then stored in the object. This means
+ * target object type then stored in the object. This means
* that the target object type (for an initialized target) will
* not be changed by a store operation.
*
* This module allows destination types of Number, String,
* Buffer, and Package.
*
- * Assumes parameters are already validated. NOTE: source_desc
+ * Assumes parameters are already validated. NOTE: source_desc
* resolution (from a reference object) must be performed by
* the caller if necessary.
*
diff --git a/drivers/acpi/acpica/exstorob.c b/drivers/acpi/acpica/exstorob.c
index 53c2484..b5f339c 100644
--- a/drivers/acpi/acpica/exstorob.c
+++ b/drivers/acpi/acpica/exstorob.c
@@ -1,4 +1,3 @@
-
/******************************************************************************
*
* Module Name: exstorob - AML Interpreter object store support, store to object
@@ -108,7 +107,7 @@
#ifdef ACPI_OBSOLETE_BEHAVIOR
/*
* NOTE: ACPI versions up to 3.0 specified that the buffer must be
- * truncated if the string is smaller than the buffer. However, "other"
+ * truncated if the string is smaller than the buffer. However, "other"
* implementations of ACPI never did this and thus became the defacto
* standard. ACPI 3.0A changes this behavior such that the buffer
* is no longer truncated.
@@ -117,7 +116,7 @@
/*
* OBSOLETE BEHAVIOR:
* If the original source was a string, we must truncate the buffer,
- * according to the ACPI spec. Integer-to-Buffer and Buffer-to-Buffer
+ * according to the ACPI spec. Integer-to-Buffer and Buffer-to-Buffer
* copy must not truncate the original buffer.
*/
if (original_src_type == ACPI_TYPE_STRING) {
diff --git a/drivers/acpi/acpica/exsystem.c b/drivers/acpi/acpica/exsystem.c
index b760641..c8a0ad5 100644
--- a/drivers/acpi/acpica/exsystem.c
+++ b/drivers/acpi/acpica/exsystem.c
@@ -1,4 +1,3 @@
-
/******************************************************************************
*
* Module Name: exsystem - Interface to OS services
@@ -59,7 +58,7 @@
* RETURN: Status
*
* DESCRIPTION: Implements a semaphore wait with a check to see if the
- * semaphore is available immediately. If it is not, the
+ * semaphore is available immediately. If it is not, the
* interpreter is released before waiting.
*
******************************************************************************/
@@ -104,7 +103,7 @@
* RETURN: Status
*
* DESCRIPTION: Implements a mutex wait with a check to see if the
- * mutex is available immediately. If it is not, the
+ * mutex is available immediately. If it is not, the
* interpreter is released before waiting.
*
******************************************************************************/
@@ -152,7 +151,7 @@
* DESCRIPTION: Suspend running thread for specified amount of time.
* Note: ACPI specification requires that Stall() does not
* relinquish the processor, and delays longer than 100 usec
- * should use Sleep() instead. We allow stalls up to 255 usec
+ * should use Sleep() instead. We allow stalls up to 255 usec
* for compatibility with other interpreters and existing BIOSs.
*
******************************************************************************/
@@ -254,7 +253,7 @@
* RETURN: Status
*
* DESCRIPTION: Provides an access point to perform synchronization operations
- * within the AML. This operation is a request to wait for an
+ * within the AML. This operation is a request to wait for an
* event.
*
******************************************************************************/
diff --git a/drivers/acpi/acpica/exutils.c b/drivers/acpi/acpica/exutils.c
index d1ab791..264d22d 100644
--- a/drivers/acpi/acpica/exutils.c
+++ b/drivers/acpi/acpica/exutils.c
@@ -1,4 +1,3 @@
-
/******************************************************************************
*
* Module Name: exutils - interpreter/scanner utilities
@@ -45,12 +44,12 @@
/*
* DEFINE_AML_GLOBALS is tested in amlcode.h
* to determine whether certain global names should be "defined" or only
- * "declared" in the current compilation. This enhances maintainability
+ * "declared" in the current compilation. This enhances maintainability
* by enabling a single header file to embody all knowledge of the names
* in question.
*
* Exactly one module of any executable should #define DEFINE_GLOBALS
- * before #including the header files which use this convention. The
+ * before #including the header files which use this convention. The
* names in question will be defined and initialized in that module,
* and declared as extern in all other modules which #include those
* header files.
diff --git a/drivers/acpi/acpica/hwacpi.c b/drivers/acpi/acpica/hwacpi.c
index a1e71d0..90a9aea 100644
--- a/drivers/acpi/acpica/hwacpi.c
+++ b/drivers/acpi/acpica/hwacpi.c
@@ -1,4 +1,3 @@
-
/******************************************************************************
*
* Module Name: hwacpi - ACPI Hardware Initialization/Mode Interface
@@ -136,7 +135,7 @@
*
* RETURN: SYS_MODE_ACPI or SYS_MODE_LEGACY
*
- * DESCRIPTION: Return current operating state of system. Determined by
+ * DESCRIPTION: Return current operating state of system. Determined by
* querying the SCI_EN bit.
*
******************************************************************************/
diff --git a/drivers/acpi/acpica/hwgpe.c b/drivers/acpi/acpica/hwgpe.c
index db40765..6456004 100644
--- a/drivers/acpi/acpica/hwgpe.c
+++ b/drivers/acpi/acpica/hwgpe.c
@@ -1,4 +1,3 @@
-
/******************************************************************************
*
* Module Name: hwgpe - Low level GPE enable/disable/clear functions
@@ -339,7 +338,8 @@
acpi_status
acpi_hw_enable_runtime_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info,
- struct acpi_gpe_block_info *gpe_block, void *context)
+ struct acpi_gpe_block_info * gpe_block,
+ void *context)
{
u32 i;
acpi_status status;
diff --git a/drivers/acpi/acpica/hwpci.c b/drivers/acpi/acpica/hwpci.c
index 1455ddc..65bc345 100644
--- a/drivers/acpi/acpica/hwpci.c
+++ b/drivers/acpi/acpica/hwpci.c
@@ -259,7 +259,7 @@
status = acpi_hw_get_pci_device_info(pci_id, info->device,
&bus_number, &is_bridge);
if (ACPI_FAILURE(status)) {
- return_ACPI_STATUS(status);
+ return (status);
}
info = info->next;
@@ -271,7 +271,7 @@
pci_id->segment, pci_id->bus, pci_id->device,
pci_id->function, status, bus_number, is_bridge));
- return_ACPI_STATUS(AE_OK);
+ return (AE_OK);
}
/*******************************************************************************
diff --git a/drivers/acpi/acpica/hwregs.c b/drivers/acpi/acpica/hwregs.c
index 4af6d20..f4e5750 100644
--- a/drivers/acpi/acpica/hwregs.c
+++ b/drivers/acpi/acpica/hwregs.c
@@ -1,4 +1,3 @@
-
/*******************************************************************************
*
* Module Name: hwregs - Read/write access functions for the various ACPI
diff --git a/drivers/acpi/acpica/hwtimer.c b/drivers/acpi/acpica/hwtimer.c
index b6411f1..bfdce22 100644
--- a/drivers/acpi/acpica/hwtimer.c
+++ b/drivers/acpi/acpica/hwtimer.c
@@ -1,4 +1,3 @@
-
/******************************************************************************
*
* Name: hwtimer.c - ACPI Power Management Timer Interface
@@ -101,8 +100,7 @@
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
- status =
- acpi_hw_read(ticks, &acpi_gbl_FADT.xpm_timer_block);
+ status = acpi_hw_read(ticks, &acpi_gbl_FADT.xpm_timer_block);
return_ACPI_STATUS(status);
}
@@ -129,7 +127,7 @@
* a versatile and accurate timer.
*
* Note that this function accommodates only a single timer
- * rollover. Thus for 24-bit timers, this function should only
+ * rollover. Thus for 24-bit timers, this function should only
* be used for calculating durations less than ~4.6 seconds
* (~20 minutes for 32-bit timers) -- calculations below:
*
diff --git a/drivers/acpi/acpica/hwvalid.c b/drivers/acpi/acpica/hwvalid.c
index c99d546..b6aae58 100644
--- a/drivers/acpi/acpica/hwvalid.c
+++ b/drivers/acpi/acpica/hwvalid.c
@@ -1,4 +1,3 @@
-
/******************************************************************************
*
* Module Name: hwvalid - I/O request validation
diff --git a/drivers/acpi/acpica/hwxface.c b/drivers/acpi/acpica/hwxface.c
index 7bfd649..05a154c 100644
--- a/drivers/acpi/acpica/hwxface.c
+++ b/drivers/acpi/acpica/hwxface.c
@@ -1,4 +1,3 @@
-
/******************************************************************************
*
* Module Name: hwxface - Public ACPICA hardware interfaces
diff --git a/drivers/acpi/acpica/hwxfsleep.c b/drivers/acpi/acpica/hwxfsleep.c
index 0ff1ece..ae443fe2 100644
--- a/drivers/acpi/acpica/hwxfsleep.c
+++ b/drivers/acpi/acpica/hwxfsleep.c
@@ -49,8 +49,7 @@
ACPI_MODULE_NAME("hwxfsleep")
/* Local prototypes */
-static acpi_status
-acpi_hw_sleep_dispatch(u8 sleep_state, u32 function_id);
+static acpi_status acpi_hw_sleep_dispatch(u8 sleep_state, u32 function_id);
/*
* Dispatch table used to efficiently branch to the various sleep
@@ -234,8 +233,7 @@
* function.
*
******************************************************************************/
-static acpi_status
-acpi_hw_sleep_dispatch(u8 sleep_state, u32 function_id)
+static acpi_status acpi_hw_sleep_dispatch(u8 sleep_state, u32 function_id)
{
acpi_status status;
struct acpi_sleep_functions *sleep_functions =
@@ -369,8 +367,7 @@
return_ACPI_STATUS(AE_AML_OPERAND_VALUE);
}
- status =
- acpi_hw_sleep_dispatch(sleep_state, ACPI_SLEEP_FUNCTION_ID);
+ status = acpi_hw_sleep_dispatch(sleep_state, ACPI_SLEEP_FUNCTION_ID);
return_ACPI_STATUS(status);
}
@@ -396,8 +393,7 @@
ACPI_FUNCTION_TRACE(acpi_leave_sleep_state_prep);
status =
- acpi_hw_sleep_dispatch(sleep_state,
- ACPI_WAKE_PREP_FUNCTION_ID);
+ acpi_hw_sleep_dispatch(sleep_state, ACPI_WAKE_PREP_FUNCTION_ID);
return_ACPI_STATUS(status);
}
diff --git a/drivers/acpi/acpica/nsaccess.c b/drivers/acpi/acpica/nsaccess.c
index 23db53c..d70eaf3 100644
--- a/drivers/acpi/acpica/nsaccess.c
+++ b/drivers/acpi/acpica/nsaccess.c
@@ -110,11 +110,11 @@
status = acpi_ns_lookup(NULL, init_val->name, init_val->type,
ACPI_IMODE_LOAD_PASS2,
ACPI_NS_NO_UPSEARCH, NULL, &new_node);
-
- if (ACPI_FAILURE(status) || (!new_node)) { /* Must be on same line for code converter */
+ if (ACPI_FAILURE(status)) {
ACPI_EXCEPTION((AE_INFO, status,
"Could not create predefined name %s",
init_val->name));
+ continue;
}
/*
@@ -179,8 +179,7 @@
/* Build an object around the static string */
- obj_desc->string.length =
- (u32) ACPI_STRLEN(val);
+ obj_desc->string.length = (u32)ACPI_STRLEN(val);
obj_desc->string.pointer = val;
obj_desc->common.flags |= AOPOBJ_STATIC_POINTER;
break;
diff --git a/drivers/acpi/acpica/nsalloc.c b/drivers/acpi/acpica/nsalloc.c
index ac389e5..15143c4 100644
--- a/drivers/acpi/acpica/nsalloc.c
+++ b/drivers/acpi/acpica/nsalloc.c
@@ -332,7 +332,7 @@
*
* RETURN: None.
*
- * DESCRIPTION: Delete a subtree of the namespace. This includes all objects
+ * DESCRIPTION: Delete a subtree of the namespace. This includes all objects
* stored within the subtree.
*
******************************************************************************/
@@ -418,7 +418,7 @@
* RETURN: Status
*
* DESCRIPTION: Delete entries within the namespace that are owned by a
- * specific ID. Used to delete entire ACPI tables. All
+ * specific ID. Used to delete entire ACPI tables. All
* reference counts are updated.
*
* MUTEX: Locks namespace during deletion walk.
diff --git a/drivers/acpi/acpica/nsdump.c b/drivers/acpi/acpica/nsdump.c
index 2526aaf..924b3c7 100644
--- a/drivers/acpi/acpica/nsdump.c
+++ b/drivers/acpi/acpica/nsdump.c
@@ -209,14 +209,6 @@
"Invalid ACPI Object Type 0x%08X", type));
}
- if (!acpi_ut_valid_acpi_name(this_node->name.integer)) {
- this_node->name.integer =
- acpi_ut_repair_name(this_node->name.ascii);
-
- ACPI_WARNING((AE_INFO, "Invalid ACPI Name %08X",
- this_node->name.integer));
- }
-
acpi_os_printf("%4.4s", acpi_ut_get_node_name(this_node));
}
@@ -700,7 +692,7 @@
*
* PARAMETERS: search_base - Root of subtree to be dumped, or
* NS_ALL to dump the entire namespace
- * max_depth - Maximum depth of dump. Use INT_MAX
+ * max_depth - Maximum depth of dump. Use INT_MAX
* for an effectively unlimited depth.
*
* RETURN: None
diff --git a/drivers/acpi/acpica/nsinit.c b/drivers/acpi/acpica/nsinit.c
index 95ffe8d..4328e2a 100644
--- a/drivers/acpi/acpica/nsinit.c
+++ b/drivers/acpi/acpica/nsinit.c
@@ -96,8 +96,8 @@
/* Walk entire namespace from the supplied root */
status = acpi_walk_namespace(ACPI_TYPE_ANY, ACPI_ROOT_OBJECT,
- ACPI_UINT32_MAX, acpi_ns_init_one_object, NULL,
- &info, NULL);
+ ACPI_UINT32_MAX, acpi_ns_init_one_object,
+ NULL, &info, NULL);
if (ACPI_FAILURE(status)) {
ACPI_EXCEPTION((AE_INFO, status, "During WalkNamespace"));
}
diff --git a/drivers/acpi/acpica/nsload.c b/drivers/acpi/acpica/nsload.c
index 76935ff..911f991 100644
--- a/drivers/acpi/acpica/nsload.c
+++ b/drivers/acpi/acpica/nsload.c
@@ -80,8 +80,8 @@
/*
* Parse the table and load the namespace with all named
- * objects found within. Control methods are NOT parsed
- * at this time. In fact, the control methods cannot be
+ * objects found within. Control methods are NOT parsed
+ * at this time. In fact, the control methods cannot be
* parsed until the entire namespace is loaded, because
* if a control method makes a forward reference (call)
* to another control method, we can't continue parsing
@@ -122,7 +122,7 @@
}
/*
- * Now we can parse the control methods. We always parse
+ * Now we can parse the control methods. We always parse
* them here for a sanity check, and if configured for
* just-in-time parsing, we delete the control method
* parse trees.
@@ -166,7 +166,7 @@
}
/*
- * Load the namespace. The DSDT is required,
+ * Load the namespace. The DSDT is required,
* but the SSDT and PSDT tables are optional.
*/
status = acpi_ns_load_table_by_type(ACPI_TABLE_ID_DSDT);
@@ -283,7 +283,7 @@
* RETURN: Status
*
* DESCRIPTION: Shrinks the namespace, typically in response to an undocking
- * event. Deletes an entire subtree starting from (and
+ * event. Deletes an entire subtree starting from (and
* including) the given handle.
*
******************************************************************************/
diff --git a/drivers/acpi/acpica/nsnames.c b/drivers/acpi/acpica/nsnames.c
index 96e0eb6..55a175e 100644
--- a/drivers/acpi/acpica/nsnames.c
+++ b/drivers/acpi/acpica/nsnames.c
@@ -195,7 +195,7 @@
ACPI_ERROR((AE_INFO,
"Invalid Namespace Node (%p) while traversing namespace",
next_node));
- return 0;
+ return (0);
}
size += ACPI_PATH_SEGMENT_LENGTH;
next_node = next_node->parent;
diff --git a/drivers/acpi/acpica/nsobject.c b/drivers/acpi/acpica/nsobject.c
index d6c9a3c..e69f7fa 100644
--- a/drivers/acpi/acpica/nsobject.c
+++ b/drivers/acpi/acpica/nsobject.c
@@ -61,7 +61,7 @@
* RETURN: Status
*
* DESCRIPTION: Record the given object as the value associated with the
- * name whose acpi_handle is passed. If Object is NULL
+ * name whose acpi_handle is passed. If Object is NULL
* and Type is ACPI_TYPE_ANY, set the name as having no value.
* Note: Future may require that the Node->Flags field be passed
* as a parameter.
@@ -133,7 +133,7 @@
((struct acpi_namespace_node *)object)->object) {
/*
* Value passed is a name handle and that name has a
- * non-null value. Use that name's value and type.
+ * non-null value. Use that name's value and type.
*/
obj_desc = ((struct acpi_namespace_node *)object)->object;
object_type = ((struct acpi_namespace_node *)object)->type;
@@ -321,7 +321,7 @@
*
* RETURN: Status
*
- * DESCRIPTION: Low-level attach data. Create and attach a Data object.
+ * DESCRIPTION: Low-level attach data. Create and attach a Data object.
*
******************************************************************************/
@@ -377,7 +377,7 @@
*
* RETURN: Status
*
- * DESCRIPTION: Low-level detach data. Delete the data node, but the caller
+ * DESCRIPTION: Low-level detach data. Delete the data node, but the caller
* is responsible for the actual data.
*
******************************************************************************/
diff --git a/drivers/acpi/acpica/nsparse.c b/drivers/acpi/acpica/nsparse.c
index ec7ba2d..233f756 100644
--- a/drivers/acpi/acpica/nsparse.c
+++ b/drivers/acpi/acpica/nsparse.c
@@ -168,11 +168,11 @@
/*
* AML Parse, pass 1
*
- * In this pass, we load most of the namespace. Control methods
- * are not parsed until later. A parse tree is not created. Instead,
- * each Parser Op subtree is deleted when it is finished. This saves
+ * In this pass, we load most of the namespace. Control methods
+ * are not parsed until later. A parse tree is not created. Instead,
+ * each Parser Op subtree is deleted when it is finished. This saves
* a great deal of memory, and allows a small cache of parse objects
- * to service the entire parse. The second pass of the parse then
+ * to service the entire parse. The second pass of the parse then
* performs another complete parse of the AML.
*/
ACPI_DEBUG_PRINT((ACPI_DB_PARSE, "**** Start pass 1\n"));
diff --git a/drivers/acpi/acpica/nssearch.c b/drivers/acpi/acpica/nssearch.c
index 456cc85..1d2d8ff 100644
--- a/drivers/acpi/acpica/nssearch.c
+++ b/drivers/acpi/acpica/nssearch.c
@@ -314,22 +314,7 @@
* this problem, and we want to be able to enable ACPI support for them,
* even though there are a few bad names.
*/
- if (!acpi_ut_valid_acpi_name(target_name)) {
- target_name =
- acpi_ut_repair_name(ACPI_CAST_PTR(char, &target_name));
-
- /* Report warning only if in strict mode or debug mode */
-
- if (!acpi_gbl_enable_interpreter_slack) {
- ACPI_WARNING((AE_INFO,
- "Found bad character(s) in name, repaired: [%4.4s]\n",
- ACPI_CAST_PTR(char, &target_name)));
- } else {
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Found bad character(s) in name, repaired: [%4.4s]\n",
- ACPI_CAST_PTR(char, &target_name)));
- }
- }
+ acpi_ut_repair_name(ACPI_CAST_PTR(char, &target_name));
/* Try to find the name in the namespace level specified by the caller */
diff --git a/drivers/acpi/acpica/nsutils.c b/drivers/acpi/acpica/nsutils.c
index ef753a4..b5b4cb7 100644
--- a/drivers/acpi/acpica/nsutils.c
+++ b/drivers/acpi/acpica/nsutils.c
@@ -530,7 +530,7 @@
((num_segments > 0) ? (num_segments - 1) : 0) + 1;
/*
- * Check to see if we're still in bounds. If not, there's a problem
+ * Check to see if we're still in bounds. If not, there's a problem
* with internal_name (invalid format).
*/
if (required_length > internal_name_length) {
@@ -557,10 +557,14 @@
(*converted_name)[j++] = '.';
}
- (*converted_name)[j++] = internal_name[names_index++];
- (*converted_name)[j++] = internal_name[names_index++];
- (*converted_name)[j++] = internal_name[names_index++];
- (*converted_name)[j++] = internal_name[names_index++];
+ /* Copy and validate the 4-char name segment */
+
+ ACPI_MOVE_NAME(&(*converted_name)[j],
+ &internal_name[names_index]);
+ acpi_ut_repair_name(&(*converted_name)[j]);
+
+ j += ACPI_NAME_SIZE;
+ names_index += ACPI_NAME_SIZE;
}
}
@@ -681,7 +685,7 @@
* \ (backslash) and ^ (carat) prefixes, and the
* . (period) to separate segments are supported.
* prefix_node - Root of subtree to be searched, or NS_ALL for the
- * root of the name space. If Name is fully
+ * root of the name space. If Name is fully
* qualified (first s8 is '\'), the passed value
* of Scope will not be accessed.
* flags - Used to indicate whether to perform upsearch or
@@ -689,7 +693,7 @@
* return_node - Where the Node is returned
*
* DESCRIPTION: Look up a name relative to a given scope and return the
- * corresponding Node. NOTE: Scope can be null.
+ * corresponding Node. NOTE: Scope can be null.
*
* MUTEX: Locks namespace
*
diff --git a/drivers/acpi/acpica/nswalk.c b/drivers/acpi/acpica/nswalk.c
index 730bccc..0483877 100644
--- a/drivers/acpi/acpica/nswalk.c
+++ b/drivers/acpi/acpica/nswalk.c
@@ -60,8 +60,8 @@
* RETURN: struct acpi_namespace_node - Pointer to the NEXT child or NULL if
* none is found.
*
- * DESCRIPTION: Return the next peer node within the namespace. If Handle
- * is valid, Scope is ignored. Otherwise, the first node
+ * DESCRIPTION: Return the next peer node within the namespace. If Handle
+ * is valid, Scope is ignored. Otherwise, the first node
* within Scope is returned.
*
******************************************************************************/
@@ -97,8 +97,8 @@
* RETURN: struct acpi_namespace_node - Pointer to the NEXT child or NULL if
* none is found.
*
- * DESCRIPTION: Return the next peer node within the namespace. If Handle
- * is valid, Scope is ignored. Otherwise, the first node
+ * DESCRIPTION: Return the next peer node within the namespace. If Handle
+ * is valid, Scope is ignored. Otherwise, the first node
* within Scope is returned.
*
******************************************************************************/
@@ -305,7 +305,7 @@
/*
* Depth first search: Attempt to go down another level in the
- * namespace if we are allowed to. Don't go any further if we have
+ * namespace if we are allowed to. Don't go any further if we have
* reached the caller specified maximum depth or if the user
* function has specified that the maximum depth has been reached.
*/
diff --git a/drivers/acpi/acpica/nsxfeval.c b/drivers/acpi/acpica/nsxfeval.c
index 9692e67..d6a9f77 100644
--- a/drivers/acpi/acpica/nsxfeval.c
+++ b/drivers/acpi/acpica/nsxfeval.c
@@ -61,16 +61,16 @@
* PARAMETERS: handle - Object handle (optional)
* pathname - Object pathname (optional)
* external_params - List of parameters to pass to method,
- * terminated by NULL. May be NULL
+ * terminated by NULL. May be NULL
* if no parameters are being passed.
* return_buffer - Where to put method's return value (if
- * any). If NULL, no value is returned.
+ * any). If NULL, no value is returned.
* return_type - Expected type of return object
*
* RETURN: Status
*
* DESCRIPTION: Find and evaluate the given object, passing the given
- * parameters if necessary. One of "Handle" or "Pathname" must
+ * parameters if necessary. One of "Handle" or "Pathname" must
* be valid (non-null)
*
******************************************************************************/
@@ -155,15 +155,15 @@
* PARAMETERS: handle - Object handle (optional)
* pathname - Object pathname (optional)
* external_params - List of parameters to pass to method,
- * terminated by NULL. May be NULL
+ * terminated by NULL. May be NULL
* if no parameters are being passed.
* return_buffer - Where to put method's return value (if
- * any). If NULL, no value is returned.
+ * any). If NULL, no value is returned.
*
* RETURN: Status
*
* DESCRIPTION: Find and evaluate the given object, passing the given
- * parameters if necessary. One of "Handle" or "Pathname" must
+ * parameters if necessary. One of "Handle" or "Pathname" must
* be valid (non-null)
*
******************************************************************************/
@@ -542,15 +542,15 @@
acpi_status status;
struct acpi_namespace_node *node;
u32 flags;
- struct acpica_device_id *hid;
- struct acpica_device_id_list *cid;
+ struct acpi_pnp_device_id *hid;
+ struct acpi_pnp_device_id_list *cid;
u32 i;
u8 found;
int no_match;
status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
if (ACPI_FAILURE(status)) {
- return (status);
+ return_ACPI_STATUS(status);
}
node = acpi_ns_validate_handle(obj_handle);
@@ -656,7 +656,7 @@
* DESCRIPTION: Performs a modified depth-first walk of the namespace tree,
* starting (and ending) at the object specified by start_handle.
* The user_function is called whenever an object of type
- * Device is found. If the user function returns
+ * Device is found. If the user function returns
* a non-zero value, the search is terminated immediately and this
* value is returned to the caller.
*
diff --git a/drivers/acpi/acpica/nsxfname.c b/drivers/acpi/acpica/nsxfname.c
index 08e9610..811c6f1 100644
--- a/drivers/acpi/acpica/nsxfname.c
+++ b/drivers/acpi/acpica/nsxfname.c
@@ -53,8 +53,8 @@
ACPI_MODULE_NAME("nsxfname")
/* Local prototypes */
-static char *acpi_ns_copy_device_id(struct acpica_device_id *dest,
- struct acpica_device_id *source,
+static char *acpi_ns_copy_device_id(struct acpi_pnp_device_id *dest,
+ struct acpi_pnp_device_id *source,
char *string_area);
/******************************************************************************
@@ -69,8 +69,8 @@
* RETURN: Status
*
* DESCRIPTION: This routine will search for a caller specified name in the
- * name space. The caller can restrict the search region by
- * specifying a non NULL parent. The parent value is itself a
+ * name space. The caller can restrict the search region by
+ * specifying a non NULL parent. The parent value is itself a
* namespace handle.
*
******************************************************************************/
@@ -149,7 +149,7 @@
* RETURN: Pointer to a string containing the fully qualified Name.
*
* DESCRIPTION: This routine returns the fully qualified name associated with
- * the Handle parameter. This and the acpi_pathname_to_handle are
+ * the Handle parameter. This and the acpi_pathname_to_handle are
* complementary functions.
*
******************************************************************************/
@@ -202,8 +202,7 @@
/* Just copy the ACPI name from the Node and zero terminate it */
- ACPI_STRNCPY(buffer->pointer, acpi_ut_get_node_name(node),
- ACPI_NAME_SIZE);
+ ACPI_MOVE_NAME(buffer->pointer, acpi_ut_get_node_name(node));
((char *)buffer->pointer)[ACPI_NAME_SIZE] = 0;
status = AE_OK;
@@ -219,20 +218,21 @@
*
* FUNCTION: acpi_ns_copy_device_id
*
- * PARAMETERS: dest - Pointer to the destination DEVICE_ID
- * source - Pointer to the source DEVICE_ID
+ * PARAMETERS: dest - Pointer to the destination PNP_DEVICE_ID
+ * source - Pointer to the source PNP_DEVICE_ID
* string_area - Pointer to where to copy the dest string
*
* RETURN: Pointer to the next string area
*
- * DESCRIPTION: Copy a single DEVICE_ID, including the string data.
+ * DESCRIPTION: Copy a single PNP_DEVICE_ID, including the string data.
*
******************************************************************************/
-static char *acpi_ns_copy_device_id(struct acpica_device_id *dest,
- struct acpica_device_id *source,
+static char *acpi_ns_copy_device_id(struct acpi_pnp_device_id *dest,
+ struct acpi_pnp_device_id *source,
char *string_area)
{
- /* Create the destination DEVICE_ID */
+
+ /* Create the destination PNP_DEVICE_ID */
dest->string = string_area;
dest->length = source->length;
@@ -256,8 +256,8 @@
* namespace node and possibly by running several standard
* control methods (Such as in the case of a device.)
*
- * For Device and Processor objects, run the Device _HID, _UID, _CID, _STA,
- * _ADR, _sx_w, and _sx_d methods.
+ * For Device and Processor objects, run the Device _HID, _UID, _CID, _SUB,
+ * _STA, _ADR, _sx_w, and _sx_d methods.
*
* Note: Allocates the return buffer, must be freed by the caller.
*
@@ -269,9 +269,10 @@
{
struct acpi_namespace_node *node;
struct acpi_device_info *info;
- struct acpica_device_id_list *cid_list = NULL;
- struct acpica_device_id *hid = NULL;
- struct acpica_device_id *uid = NULL;
+ struct acpi_pnp_device_id_list *cid_list = NULL;
+ struct acpi_pnp_device_id *hid = NULL;
+ struct acpi_pnp_device_id *uid = NULL;
+ struct acpi_pnp_device_id *sub = NULL;
char *next_id_string;
acpi_object_type type;
acpi_name name;
@@ -316,7 +317,7 @@
if ((type == ACPI_TYPE_DEVICE) || (type == ACPI_TYPE_PROCESSOR)) {
/*
* Get extra info for ACPI Device/Processor objects only:
- * Run the Device _HID, _UID, and _CID methods.
+ * Run the Device _HID, _UID, _SUB, and _CID methods.
*
* Note: none of these methods are required, so they may or may
* not be present for this device. The Info->Valid bitfield is used
@@ -339,6 +340,14 @@
valid |= ACPI_VALID_UID;
}
+ /* Execute the Device._SUB method */
+
+ status = acpi_ut_execute_SUB(node, &sub);
+ if (ACPI_SUCCESS(status)) {
+ info_size += sub->length;
+ valid |= ACPI_VALID_SUB;
+ }
+
/* Execute the Device._CID method */
status = acpi_ut_execute_CID(node, &cid_list);
@@ -348,7 +357,7 @@
info_size +=
(cid_list->list_size -
- sizeof(struct acpica_device_id_list));
+ sizeof(struct acpi_pnp_device_id_list));
valid |= ACPI_VALID_CID;
}
}
@@ -418,16 +427,17 @@
next_id_string = ACPI_CAST_PTR(char, info->compatible_id_list.ids);
if (cid_list) {
- /* Point past the CID DEVICE_ID array */
+ /* Point past the CID PNP_DEVICE_ID array */
next_id_string +=
((acpi_size) cid_list->count *
- sizeof(struct acpica_device_id));
+ sizeof(struct acpi_pnp_device_id));
}
/*
- * Copy the HID, UID, and CIDs to the return buffer. The variable-length
- * strings are copied to the reserved area at the end of the buffer.
+ * Copy the HID, UID, SUB, and CIDs to the return buffer.
+ * The variable-length strings are copied to the reserved area
+ * at the end of the buffer.
*
* For HID and CID, check if the ID is a PCI Root Bridge.
*/
@@ -445,6 +455,11 @@
uid, next_id_string);
}
+ if (sub) {
+ next_id_string = acpi_ns_copy_device_id(&info->subsystem_id,
+ sub, next_id_string);
+ }
+
if (cid_list) {
info->compatible_id_list.count = cid_list->count;
info->compatible_id_list.list_size = cid_list->list_size;
@@ -481,6 +496,9 @@
if (uid) {
ACPI_FREE(uid);
}
+ if (sub) {
+ ACPI_FREE(sub);
+ }
if (cid_list) {
ACPI_FREE(cid_list);
}
diff --git a/drivers/acpi/acpica/nsxfobj.c b/drivers/acpi/acpica/nsxfobj.c
index 6766fc4..9d029da 100644
--- a/drivers/acpi/acpica/nsxfobj.c
+++ b/drivers/acpi/acpica/nsxfobj.c
@@ -220,8 +220,8 @@
*
* RETURN: Status
*
- * DESCRIPTION: Return the next peer object within the namespace. If Handle is
- * valid, Scope is ignored. Otherwise, the first object within
+ * DESCRIPTION: Return the next peer object within the namespace. If Handle is
+ * valid, Scope is ignored. Otherwise, the first object within
* Scope is returned.
*
******************************************************************************/
diff --git a/drivers/acpi/acpica/psargs.c b/drivers/acpi/acpica/psargs.c
index 844464c..cb79e2d 100644
--- a/drivers/acpi/acpica/psargs.c
+++ b/drivers/acpi/acpica/psargs.c
@@ -120,7 +120,7 @@
* RETURN: Pointer to end-of-package +1
*
* DESCRIPTION: Get next package length and return a pointer past the end of
- * the package. Consumes the package length field
+ * the package. Consumes the package length field
*
******************************************************************************/
@@ -147,8 +147,8 @@
* RETURN: Pointer to the start of the name string (pointer points into
* the AML.
*
- * DESCRIPTION: Get next raw namestring within the AML stream. Handles all name
- * prefix characters. Set parser state to point past the string.
+ * DESCRIPTION: Get next raw namestring within the AML stream. Handles all name
+ * prefix characters. Set parser state to point past the string.
* (Name is consumed from the AML.)
*
******************************************************************************/
@@ -220,7 +220,7 @@
*
* DESCRIPTION: Get next name (if method call, return # of required args).
* Names are looked up in the internal namespace to determine
- * if the name represents a control method. If a method
+ * if the name represents a control method. If a method
* is found, the number of arguments to the method is returned.
* This information is critical for parsing to continue correctly.
*
diff --git a/drivers/acpi/acpica/psloop.c b/drivers/acpi/acpica/psloop.c
index 799162c..5607805 100644
--- a/drivers/acpi/acpica/psloop.c
+++ b/drivers/acpi/acpica/psloop.c
@@ -133,18 +133,46 @@
case AML_CLASS_UNKNOWN:
- /* The opcode is unrecognized. Just skip unknown opcodes */
+ /* The opcode is unrecognized. Complain and skip unknown opcodes */
- ACPI_ERROR((AE_INFO,
- "Found unknown opcode 0x%X at AML address %p offset 0x%X, ignoring",
- walk_state->opcode, walk_state->parser_state.aml,
- walk_state->aml_offset));
+ if (walk_state->pass_number == 2) {
+ ACPI_ERROR((AE_INFO,
+ "Unknown opcode 0x%.2X at table offset 0x%.4X, ignoring",
+ walk_state->opcode,
+ (u32)(walk_state->aml_offset +
+ sizeof(struct acpi_table_header))));
- ACPI_DUMP_BUFFER(walk_state->parser_state.aml, 128);
+ ACPI_DUMP_BUFFER(walk_state->parser_state.aml - 16, 48);
- /* Assume one-byte bad opcode */
+#ifdef ACPI_ASL_COMPILER
+ /*
+ * This is executed for the disassembler only. Output goes
+ * to the disassembled ASL output file.
+ */
+ acpi_os_printf
+ ("/*\nError: Unknown opcode 0x%.2X at table offset 0x%.4X, context:\n",
+ walk_state->opcode,
+ (u32)(walk_state->aml_offset +
+ sizeof(struct acpi_table_header)));
+
+ /* Dump the context surrounding the invalid opcode */
+
+ acpi_ut_dump_buffer(((u8 *)walk_state->parser_state.
+ aml - 16), 48, DB_BYTE_DISPLAY,
+ walk_state->aml_offset +
+ sizeof(struct acpi_table_header) -
+ 16);
+ acpi_os_printf(" */\n");
+#endif
+ }
+
+ /* Increment past one-byte or two-byte opcode */
walk_state->parser_state.aml++;
+ if (walk_state->opcode > 0xFF) { /* Can only happen if first byte is 0x5B */
+ walk_state->parser_state.aml++;
+ }
+
return_ACPI_STATUS(AE_CTRL_PARSE_CONTINUE);
default:
@@ -519,11 +547,18 @@
if ((op_info->class ==
AML_CLASS_EXECUTE) && (!arg)) {
ACPI_WARNING((AE_INFO,
- "Detected an unsupported executable opcode "
- "at module-level: [0x%.4X] at table offset 0x%.4X",
- op->common.aml_opcode,
- (u32)((aml_op_start - walk_state->parser_state.aml_start)
- + sizeof(struct acpi_table_header))));
+ "Unsupported module-level executable opcode "
+ "0x%.2X at table offset 0x%.4X",
+ op->common.
+ aml_opcode,
+ (u32)
+ (ACPI_PTR_DIFF
+ (aml_op_start,
+ walk_state->
+ parser_state.
+ aml_start) +
+ sizeof(struct
+ acpi_table_header))));
}
}
break;
@@ -843,8 +878,6 @@
*op = NULL;
}
- ACPI_PREEMPTION_POINT();
-
return_ACPI_STATUS(AE_OK);
}
diff --git a/drivers/acpi/acpica/psopcode.c b/drivers/acpi/acpica/psopcode.c
index ed1d457..1793d93 100644
--- a/drivers/acpi/acpica/psopcode.c
+++ b/drivers/acpi/acpica/psopcode.c
@@ -59,7 +59,7 @@
*
* DESCRIPTION: Opcode table. Each entry contains <opcode, type, name, operands>
* The name is a simple ascii string, the operand specifier is an
- * ascii string with one letter per operand. The letter specifies
+ * ascii string with one letter per operand. The letter specifies
* the operand type.
*
******************************************************************************/
@@ -183,7 +183,7 @@
******************************************************************************/
/*
- * Master Opcode information table. A summary of everything we know about each
+ * Master Opcode information table. A summary of everything we know about each
* opcode, all in one place.
*/
const struct acpi_opcode_info acpi_gbl_aml_op_info[AML_NUM_OPCODES] = {
@@ -392,10 +392,12 @@
AML_FLAGS_EXEC_1A_0T_1R | AML_NO_OPERAND_RESOLVE),
/* 38 */ ACPI_OP("LAnd", ARGP_LAND_OP, ARGI_LAND_OP, ACPI_TYPE_ANY,
AML_CLASS_EXECUTE, AML_TYPE_EXEC_2A_0T_1R,
- AML_FLAGS_EXEC_2A_0T_1R | AML_LOGICAL_NUMERIC | AML_CONSTANT),
+ AML_FLAGS_EXEC_2A_0T_1R | AML_LOGICAL_NUMERIC |
+ AML_CONSTANT),
/* 39 */ ACPI_OP("LOr", ARGP_LOR_OP, ARGI_LOR_OP, ACPI_TYPE_ANY,
AML_CLASS_EXECUTE, AML_TYPE_EXEC_2A_0T_1R,
- AML_FLAGS_EXEC_2A_0T_1R | AML_LOGICAL_NUMERIC | AML_CONSTANT),
+ AML_FLAGS_EXEC_2A_0T_1R | AML_LOGICAL_NUMERIC |
+ AML_CONSTANT),
/* 3A */ ACPI_OP("LNot", ARGP_LNOT_OP, ARGI_LNOT_OP, ACPI_TYPE_ANY,
AML_CLASS_EXECUTE, AML_TYPE_EXEC_1A_0T_1R,
AML_FLAGS_EXEC_1A_0T_1R | AML_CONSTANT),
@@ -495,7 +497,8 @@
AML_NSNODE | AML_NAMED | AML_DEFER),
/* 59 */ ACPI_OP("Field", ARGP_FIELD_OP, ARGI_FIELD_OP, ACPI_TYPE_ANY,
AML_CLASS_NAMED_OBJECT, AML_TYPE_NAMED_FIELD,
- AML_HAS_ARGS | AML_NSOBJECT | AML_NSOPCODE | AML_FIELD),
+ AML_HAS_ARGS | AML_NSOBJECT | AML_NSOPCODE |
+ AML_FIELD),
/* 5A */ ACPI_OP("Device", ARGP_DEVICE_OP, ARGI_DEVICE_OP,
ACPI_TYPE_DEVICE, AML_CLASS_NAMED_OBJECT,
AML_TYPE_NAMED_NO_OBJ,
@@ -519,12 +522,13 @@
/* 5E */ ACPI_OP("IndexField", ARGP_INDEX_FIELD_OP, ARGI_INDEX_FIELD_OP,
ACPI_TYPE_ANY, AML_CLASS_NAMED_OBJECT,
AML_TYPE_NAMED_FIELD,
- AML_HAS_ARGS | AML_NSOBJECT | AML_NSOPCODE | AML_FIELD),
+ AML_HAS_ARGS | AML_NSOBJECT | AML_NSOPCODE |
+ AML_FIELD),
/* 5F */ ACPI_OP("BankField", ARGP_BANK_FIELD_OP, ARGI_BANK_FIELD_OP,
- ACPI_TYPE_LOCAL_BANK_FIELD, AML_CLASS_NAMED_OBJECT,
- AML_TYPE_NAMED_FIELD,
- AML_HAS_ARGS | AML_NSOBJECT | AML_NSOPCODE | AML_FIELD |
- AML_DEFER),
+ ACPI_TYPE_LOCAL_BANK_FIELD,
+ AML_CLASS_NAMED_OBJECT, AML_TYPE_NAMED_FIELD,
+ AML_HAS_ARGS | AML_NSOBJECT | AML_NSOPCODE |
+ AML_FIELD | AML_DEFER),
/* Internal opcodes that map to invalid AML opcodes */
@@ -632,7 +636,8 @@
/* 7D */ ACPI_OP("[EvalSubTree]", ARGP_SCOPE_OP, ARGI_SCOPE_OP,
ACPI_TYPE_ANY, AML_CLASS_NAMED_OBJECT,
AML_TYPE_NAMED_NO_OBJ,
- AML_HAS_ARGS | AML_NSOBJECT | AML_NSOPCODE | AML_NSNODE),
+ AML_HAS_ARGS | AML_NSOBJECT | AML_NSOPCODE |
+ AML_NSNODE),
/* ACPI 3.0 opcodes */
@@ -695,7 +700,7 @@
/*
* This table is indexed by the second opcode of the extended opcode
- * pair. It returns an index into the opcode table (acpi_gbl_aml_op_info)
+ * pair. It returns an index into the opcode table (acpi_gbl_aml_op_info)
*/
static const u8 acpi_gbl_long_op_index[NUM_EXTENDED_OPCODE] = {
/* 0 1 2 3 4 5 6 7 */
diff --git a/drivers/acpi/acpica/psparse.c b/drivers/acpi/acpica/psparse.c
index 0198570..2494caf 100644
--- a/drivers/acpi/acpica/psparse.c
+++ b/drivers/acpi/acpica/psparse.c
@@ -43,9 +43,9 @@
/*
* Parse the AML and build an operation tree as most interpreters,
- * like Perl, do. Parsing is done by hand rather than with a YACC
+ * like Perl, do. Parsing is done by hand rather than with a YACC
* generated parser to tightly constrain stack and dynamic memory
- * usage. At the same time, parsing is kept flexible and the code
+ * usage. At the same time, parsing is kept flexible and the code
* fairly compact by parsing based on a list of AML opcode
* templates in aml_op_info[]
*/
@@ -379,7 +379,7 @@
case AE_CTRL_FALSE:
/*
* Either an IF/WHILE Predicate was false or we encountered a BREAK
- * opcode. In both cases, we do not execute the rest of the
+ * opcode. In both cases, we do not execute the rest of the
* package; We simply close out the parent (finishing the walk of
* this branch of the tree) and continue execution at the parent
* level.
@@ -459,8 +459,9 @@
/* Executing a control method - additional cleanup */
- acpi_ds_terminate_control_method(
- walk_state->method_desc, walk_state);
+ acpi_ds_terminate_control_method(walk_state->
+ method_desc,
+ walk_state);
}
acpi_ds_delete_walk_state(walk_state);
@@ -487,7 +488,7 @@
acpi_gbl_current_walk_list = thread;
/*
- * Execute the walk loop as long as there is a valid Walk State. This
+ * Execute the walk loop as long as there is a valid Walk State. This
* handles nested control method invocations without recursion.
*/
ACPI_DEBUG_PRINT((ACPI_DB_PARSE, "State=%p\n", walk_state));
diff --git a/drivers/acpi/acpica/psutils.c b/drivers/acpi/acpica/psutils.c
index 8736ad5..4137dcb 100644
--- a/drivers/acpi/acpica/psutils.c
+++ b/drivers/acpi/acpica/psutils.c
@@ -108,7 +108,7 @@
* RETURN: Pointer to the new Op, null on failure
*
* DESCRIPTION: Allocate an acpi_op, choose op type (and thus size) based on
- * opcode. A cache of opcodes is available for the pure
+ * opcode. A cache of opcodes is available for the pure
* GENERIC_OP, since this is by far the most commonly used.
*
******************************************************************************/
@@ -164,7 +164,7 @@
*
* RETURN: None.
*
- * DESCRIPTION: Free an Op object. Either put it on the GENERIC_OP cache list
+ * DESCRIPTION: Free an Op object. Either put it on the GENERIC_OP cache list
* or actually free it.
*
******************************************************************************/
diff --git a/drivers/acpi/acpica/rscalc.c b/drivers/acpi/acpica/rscalc.c
index de12469..147feb6 100644
--- a/drivers/acpi/acpica/rscalc.c
+++ b/drivers/acpi/acpica/rscalc.c
@@ -457,6 +457,15 @@
* Get the number of vendor data bytes
*/
extra_struct_bytes = resource_length;
+
+ /*
+ * There is already one byte included in the minimum
+ * descriptor size. If there are extra struct bytes,
+ * subtract one from the count.
+ */
+ if (extra_struct_bytes) {
+ extra_struct_bytes--;
+ }
break;
case ACPI_RESOURCE_NAME_END_TAG:
@@ -601,7 +610,7 @@
/*
* Calculate the size of the return buffer.
* The base size is the number of elements * the sizes of the
- * structures. Additional space for the strings is added below.
+ * structures. Additional space for the strings is added below.
* The minus one is to subtract the size of the u8 Source[1]
* member because it is added below.
*
@@ -664,8 +673,7 @@
(*sub_object_list)->string.
length + 1);
} else {
- temp_size_needed +=
- acpi_ns_get_pathname_length((*sub_object_list)->reference.node);
+ temp_size_needed += acpi_ns_get_pathname_length((*sub_object_list)->reference.node);
}
} else {
/*
diff --git a/drivers/acpi/acpica/rslist.c b/drivers/acpi/acpica/rslist.c
index 46b5324..8b64db9 100644
--- a/drivers/acpi/acpica/rslist.c
+++ b/drivers/acpi/acpica/rslist.c
@@ -109,7 +109,7 @@
ACPI_ERROR((AE_INFO,
"Invalid/unsupported resource descriptor: Type 0x%2.2X",
resource_index));
- return (AE_AML_INVALID_RESOURCE_TYPE);
+ return_ACPI_STATUS(AE_AML_INVALID_RESOURCE_TYPE);
}
/* Convert the AML byte stream resource to a local resource struct */
@@ -200,7 +200,7 @@
ACPI_ERROR((AE_INFO,
"Invalid/unsupported resource descriptor: Type 0x%2.2X",
resource->type));
- return (AE_AML_INVALID_RESOURCE_TYPE);
+ return_ACPI_STATUS(AE_AML_INVALID_RESOURCE_TYPE);
}
status = acpi_rs_convert_resource_to_aml(resource,
diff --git a/drivers/acpi/acpica/tbfind.c b/drivers/acpi/acpica/tbfind.c
index 57deae1..77d1db2 100644
--- a/drivers/acpi/acpica/tbfind.c
+++ b/drivers/acpi/acpica/tbfind.c
@@ -77,7 +77,7 @@
/* Normalize the input strings */
ACPI_MEMSET(&header, 0, sizeof(struct acpi_table_header));
- ACPI_STRNCPY(header.signature, signature, ACPI_NAME_SIZE);
+ ACPI_MOVE_NAME(header.signature, signature);
ACPI_STRNCPY(header.oem_id, oem_id, ACPI_OEM_ID_SIZE);
ACPI_STRNCPY(header.oem_table_id, oem_table_id, ACPI_OEM_TABLE_ID_SIZE);
diff --git a/drivers/acpi/acpica/tbinstal.c b/drivers/acpi/acpica/tbinstal.c
index 70f9d78..f540ae4 100644
--- a/drivers/acpi/acpica/tbinstal.c
+++ b/drivers/acpi/acpica/tbinstal.c
@@ -526,6 +526,8 @@
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "ACPI Tables freed\n"));
(void)acpi_ut_release_mutex(ACPI_MTX_TABLES);
+
+ return_VOID;
}
/*******************************************************************************
diff --git a/drivers/acpi/acpica/tbutils.c b/drivers/acpi/acpica/tbutils.c
index b6cea30..285e24b 100644
--- a/drivers/acpi/acpica/tbutils.c
+++ b/drivers/acpi/acpica/tbutils.c
@@ -354,7 +354,7 @@
sum = (u8) (sum + *(buffer++));
}
- return sum;
+ return (sum);
}
/*******************************************************************************
diff --git a/drivers/acpi/acpica/tbxface.c b/drivers/acpi/acpica/tbxface.c
index 2110126..f5632780 100644
--- a/drivers/acpi/acpica/tbxface.c
+++ b/drivers/acpi/acpica/tbxface.c
@@ -236,7 +236,7 @@
sizeof(struct
acpi_table_header));
if (!header) {
- return AE_NO_MEMORY;
+ return (AE_NO_MEMORY);
}
ACPI_MEMCPY(out_table_header, header,
sizeof(struct acpi_table_header));
@@ -244,7 +244,7 @@
sizeof(struct
acpi_table_header));
} else {
- return AE_NOT_FOUND;
+ return (AE_NOT_FOUND);
}
} else {
ACPI_MEMCPY(out_table_header,
diff --git a/drivers/acpi/acpica/tbxfload.c b/drivers/acpi/acpica/tbxfload.c
index f87cc63..a5e1e4e 100644
--- a/drivers/acpi/acpica/tbxfload.c
+++ b/drivers/acpi/acpica/tbxfload.c
@@ -211,7 +211,7 @@
* DESCRIPTION: Dynamically load an ACPI table from the caller's buffer. Must
* be a valid ACPI table with a valid ACPI table header.
* Note1: Mainly intended to support hotplug addition of SSDTs.
- * Note2: Does not copy the incoming table. User is reponsible
+ * Note2: Does not copy the incoming table. User is responsible
* to ensure that the table is not deleted or unmapped.
*
******************************************************************************/
diff --git a/drivers/acpi/acpica/tbxfroot.c b/drivers/acpi/acpica/tbxfroot.c
index 74e7208..28f3302 100644
--- a/drivers/acpi/acpica/tbxfroot.c
+++ b/drivers/acpi/acpica/tbxfroot.c
@@ -67,7 +67,6 @@
static acpi_status acpi_tb_validate_rsdp(struct acpi_table_rsdp *rsdp)
{
- ACPI_FUNCTION_ENTRY();
/*
* The signature and checksum must both be correct
@@ -108,7 +107,7 @@
* RETURN: Status, RSDP physical address
*
* DESCRIPTION: Search lower 1Mbyte of memory for the root system descriptor
- * pointer structure. If it is found, set *RSDP to point to it.
+ * pointer structure. If it is found, set *RSDP to point to it.
*
* NOTE1: The RSDP must be either in the first 1K of the Extended
* BIOS Data Area or between E0000 and FFFFF (From ACPI Spec.)
diff --git a/drivers/acpi/acpica/utcache.c b/drivers/acpi/acpica/utcache.c
new file mode 100644
index 0000000..e1d40ed
--- /dev/null
+++ b/drivers/acpi/acpica/utcache.c
@@ -0,0 +1,323 @@
+/******************************************************************************
+ *
+ * Module Name: utcache - local cache allocation routines
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2012, Intel Corp.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * substantially similar to the "NO WARRANTY" disclaimer below
+ * ("Disclaimer") and any redistribution must be conditioned upon
+ * including a substantially similar Disclaimer requirement for further
+ * binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ * of any contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#include <acpi/acpi.h>
+#include "accommon.h"
+
+#define _COMPONENT ACPI_UTILITIES
+ACPI_MODULE_NAME("utcache")
+
+#ifdef ACPI_USE_LOCAL_CACHE
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_os_create_cache
+ *
+ * PARAMETERS: cache_name - Ascii name for the cache
+ * object_size - Size of each cached object
+ * max_depth - Maximum depth of the cache (in objects)
+ * return_cache - Where the new cache object is returned
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Create a cache object
+ *
+ ******************************************************************************/
+acpi_status
+acpi_os_create_cache(char *cache_name,
+ u16 object_size,
+ u16 max_depth, struct acpi_memory_list ** return_cache)
+{
+ struct acpi_memory_list *cache;
+
+ ACPI_FUNCTION_ENTRY();
+
+ if (!cache_name || !return_cache || (object_size < 16)) {
+ return (AE_BAD_PARAMETER);
+ }
+
+ /* Create the cache object */
+
+ cache = acpi_os_allocate(sizeof(struct acpi_memory_list));
+ if (!cache) {
+ return (AE_NO_MEMORY);
+ }
+
+ /* Populate the cache object and return it */
+
+ ACPI_MEMSET(cache, 0, sizeof(struct acpi_memory_list));
+ cache->link_offset = 8;
+ cache->list_name = cache_name;
+ cache->object_size = object_size;
+ cache->max_depth = max_depth;
+
+ *return_cache = cache;
+ return (AE_OK);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_os_purge_cache
+ *
+ * PARAMETERS: cache - Handle to cache object
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Free all objects within the requested cache.
+ *
+ ******************************************************************************/
+
+acpi_status acpi_os_purge_cache(struct acpi_memory_list * cache)
+{
+ char *next;
+ acpi_status status;
+
+ ACPI_FUNCTION_ENTRY();
+
+ if (!cache) {
+ return (AE_BAD_PARAMETER);
+ }
+
+ status = acpi_ut_acquire_mutex(ACPI_MTX_CACHES);
+ if (ACPI_FAILURE(status)) {
+ return (status);
+ }
+
+ /* Walk the list of objects in this cache */
+
+ while (cache->list_head) {
+
+ /* Delete and unlink one cached state object */
+
+ next = *(ACPI_CAST_INDIRECT_PTR(char,
+ &(((char *)cache->
+ list_head)[cache->
+ link_offset])));
+ ACPI_FREE(cache->list_head);
+
+ cache->list_head = next;
+ cache->current_depth--;
+ }
+
+ (void)acpi_ut_release_mutex(ACPI_MTX_CACHES);
+ return (AE_OK);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_os_delete_cache
+ *
+ * PARAMETERS: cache - Handle to cache object
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Free all objects within the requested cache and delete the
+ * cache object.
+ *
+ ******************************************************************************/
+
+acpi_status acpi_os_delete_cache(struct acpi_memory_list * cache)
+{
+ acpi_status status;
+
+ ACPI_FUNCTION_ENTRY();
+
+ /* Purge all objects in the cache */
+
+ status = acpi_os_purge_cache(cache);
+ if (ACPI_FAILURE(status)) {
+ return (status);
+ }
+
+ /* Now we can delete the cache object */
+
+ acpi_os_free(cache);
+ return (AE_OK);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_os_release_object
+ *
+ * PARAMETERS: cache - Handle to cache object
+ * object - The object to be released
+ *
+ * RETURN: None
+ *
+ * DESCRIPTION: Release an object to the specified cache. If cache is full,
+ * the object is deleted.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_os_release_object(struct acpi_memory_list * cache, void *object)
+{
+ acpi_status status;
+
+ ACPI_FUNCTION_ENTRY();
+
+ if (!cache || !object) {
+ return (AE_BAD_PARAMETER);
+ }
+
+ /* If cache is full, just free this object */
+
+ if (cache->current_depth >= cache->max_depth) {
+ ACPI_FREE(object);
+ ACPI_MEM_TRACKING(cache->total_freed++);
+ }
+
+ /* Otherwise put this object back into the cache */
+
+ else {
+ status = acpi_ut_acquire_mutex(ACPI_MTX_CACHES);
+ if (ACPI_FAILURE(status)) {
+ return (status);
+ }
+
+ /* Mark the object as cached */
+
+ ACPI_MEMSET(object, 0xCA, cache->object_size);
+ ACPI_SET_DESCRIPTOR_TYPE(object, ACPI_DESC_TYPE_CACHED);
+
+ /* Put the object at the head of the cache list */
+
+ *(ACPI_CAST_INDIRECT_PTR(char,
+ &(((char *)object)[cache->
+ link_offset]))) =
+ cache->list_head;
+ cache->list_head = object;
+ cache->current_depth++;
+
+ (void)acpi_ut_release_mutex(ACPI_MTX_CACHES);
+ }
+
+ return (AE_OK);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_os_acquire_object
+ *
+ * PARAMETERS: cache - Handle to cache object
+ *
+ * RETURN: the acquired object. NULL on error
+ *
+ * DESCRIPTION: Get an object from the specified cache. If cache is empty,
+ * the object is allocated.
+ *
+ ******************************************************************************/
+
+void *acpi_os_acquire_object(struct acpi_memory_list *cache)
+{
+ acpi_status status;
+ void *object;
+
+ ACPI_FUNCTION_NAME(os_acquire_object);
+
+ if (!cache) {
+ return (NULL);
+ }
+
+ status = acpi_ut_acquire_mutex(ACPI_MTX_CACHES);
+ if (ACPI_FAILURE(status)) {
+ return (NULL);
+ }
+
+ ACPI_MEM_TRACKING(cache->requests++);
+
+ /* Check the cache first */
+
+ if (cache->list_head) {
+
+ /* There is an object available, use it */
+
+ object = cache->list_head;
+ cache->list_head = *(ACPI_CAST_INDIRECT_PTR(char,
+ &(((char *)
+ object)[cache->
+ link_offset])));
+
+ cache->current_depth--;
+
+ ACPI_MEM_TRACKING(cache->hits++);
+ ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
+ "Object %p from %s cache\n", object,
+ cache->list_name));
+
+ status = acpi_ut_release_mutex(ACPI_MTX_CACHES);
+ if (ACPI_FAILURE(status)) {
+ return (NULL);
+ }
+
+ /* Clear (zero) the previously used Object */
+
+ ACPI_MEMSET(object, 0, cache->object_size);
+ } else {
+ /* The cache is empty, create a new object */
+
+ ACPI_MEM_TRACKING(cache->total_allocated++);
+
+#ifdef ACPI_DBG_TRACK_ALLOCATIONS
+ if ((cache->total_allocated - cache->total_freed) >
+ cache->max_occupied) {
+ cache->max_occupied =
+ cache->total_allocated - cache->total_freed;
+ }
+#endif
+
+ /* Avoid deadlock with ACPI_ALLOCATE_ZEROED */
+
+ status = acpi_ut_release_mutex(ACPI_MTX_CACHES);
+ if (ACPI_FAILURE(status)) {
+ return (NULL);
+ }
+
+ object = ACPI_ALLOCATE_ZEROED(cache->object_size);
+ if (!object) {
+ return (NULL);
+ }
+ }
+
+ return (object);
+}
+#endif /* ACPI_USE_LOCAL_CACHE */
diff --git a/drivers/acpi/acpica/utclib.c b/drivers/acpi/acpica/utclib.c
new file mode 100644
index 0000000..19ea4755
--- /dev/null
+++ b/drivers/acpi/acpica/utclib.c
@@ -0,0 +1,749 @@
+/******************************************************************************
+ *
+ * Module Name: cmclib - Local implementation of C library functions
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2012, Intel Corp.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * substantially similar to the "NO WARRANTY" disclaimer below
+ * ("Disclaimer") and any redistribution must be conditioned upon
+ * including a substantially similar Disclaimer requirement for further
+ * binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ * of any contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#include <acpi/acpi.h>
+#include "accommon.h"
+
+/*
+ * These implementations of standard C Library routines can optionally be
+ * used if a C library is not available. In general, they are less efficient
+ * than an inline or assembly implementation
+ */
+
+#define _COMPONENT ACPI_UTILITIES
+ACPI_MODULE_NAME("cmclib")
+
+#ifndef ACPI_USE_SYSTEM_CLIBRARY
+#define NEGATIVE 1
+#define POSITIVE 0
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_memcmp (memcmp)
+ *
+ * PARAMETERS: buffer1 - First Buffer
+ * buffer2 - Second Buffer
+ * count - Maximum # of bytes to compare
+ *
+ * RETURN: Index where Buffers mismatched, or 0 if Buffers matched
+ *
+ * DESCRIPTION: Compare two Buffers, with a maximum length
+ *
+ ******************************************************************************/
+int acpi_ut_memcmp(const char *buffer1, const char *buffer2, acpi_size count)
+{
+
+ return ((count == ACPI_SIZE_MAX) ? 0 : ((unsigned char)*buffer1 -
+ (unsigned char)*buffer2));
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_memcpy (memcpy)
+ *
+ * PARAMETERS: dest - Target of the copy
+ * src - Source buffer to copy
+ * count - Number of bytes to copy
+ *
+ * RETURN: Dest
+ *
+ * DESCRIPTION: Copy arbitrary bytes of memory
+ *
+ ******************************************************************************/
+
+void *acpi_ut_memcpy(void *dest, const void *src, acpi_size count)
+{
+ char *new = (char *)dest;
+ char *old = (char *)src;
+
+ while (count) {
+ *new = *old;
+ new++;
+ old++;
+ count--;
+ }
+
+ return (dest);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_memset (memset)
+ *
+ * PARAMETERS: dest - Buffer to set
+ * value - Value to set each byte of memory
+ * count - Number of bytes to set
+ *
+ * RETURN: Dest
+ *
+ * DESCRIPTION: Initialize a buffer to a known value.
+ *
+ ******************************************************************************/
+
+void *acpi_ut_memset(void *dest, u8 value, acpi_size count)
+{
+ char *new = (char *)dest;
+
+ while (count) {
+ *new = (char)value;
+ new++;
+ count--;
+ }
+
+ return (dest);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_strlen (strlen)
+ *
+ * PARAMETERS: string - Null terminated string
+ *
+ * RETURN: Length
+ *
+ * DESCRIPTION: Returns the length of the input string
+ *
+ ******************************************************************************/
+
+acpi_size acpi_ut_strlen(const char *string)
+{
+ u32 length = 0;
+
+ /* Count the string until a null is encountered */
+
+ while (*string) {
+ length++;
+ string++;
+ }
+
+ return (length);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_strcpy (strcpy)
+ *
+ * PARAMETERS: dst_string - Target of the copy
+ * src_string - The source string to copy
+ *
+ * RETURN: dst_string
+ *
+ * DESCRIPTION: Copy a null terminated string
+ *
+ ******************************************************************************/
+
+char *acpi_ut_strcpy(char *dst_string, const char *src_string)
+{
+ char *string = dst_string;
+
+ /* Move bytes brute force */
+
+ while (*src_string) {
+ *string = *src_string;
+
+ string++;
+ src_string++;
+ }
+
+ /* Null terminate */
+
+ *string = 0;
+ return (dst_string);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_strncpy (strncpy)
+ *
+ * PARAMETERS: dst_string - Target of the copy
+ * src_string - The source string to copy
+ * count - Maximum # of bytes to copy
+ *
+ * RETURN: dst_string
+ *
+ * DESCRIPTION: Copy a null terminated string, with a maximum length
+ *
+ ******************************************************************************/
+
+char *acpi_ut_strncpy(char *dst_string, const char *src_string, acpi_size count)
+{
+ char *string = dst_string;
+
+ /* Copy the string */
+
+ for (string = dst_string;
+ count && (count--, (*string++ = *src_string++));) {;
+ }
+
+ /* Pad with nulls if necessary */
+
+ while (count--) {
+ *string = 0;
+ string++;
+ }
+
+ /* Return original pointer */
+
+ return (dst_string);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_strcmp (strcmp)
+ *
+ * PARAMETERS: string1 - First string
+ * string2 - Second string
+ *
+ * RETURN: Index where strings mismatched, or 0 if strings matched
+ *
+ * DESCRIPTION: Compare two null terminated strings
+ *
+ ******************************************************************************/
+
+int acpi_ut_strcmp(const char *string1, const char *string2)
+{
+
+ for (; (*string1 == *string2); string2++) {
+ if (!*string1++) {
+ return (0);
+ }
+ }
+
+ return ((unsigned char)*string1 - (unsigned char)*string2);
+}
+
+#ifdef ACPI_FUTURE_IMPLEMENTATION
+/* Not used at this time */
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_strchr (strchr)
+ *
+ * PARAMETERS: string - Search string
+ * ch - character to search for
+ *
+ * RETURN: Ptr to char or NULL if not found
+ *
+ * DESCRIPTION: Search a string for a character
+ *
+ ******************************************************************************/
+
+char *acpi_ut_strchr(const char *string, int ch)
+{
+
+ for (; (*string); string++) {
+ if ((*string) == (char)ch) {
+ return ((char *)string);
+ }
+ }
+
+ return (NULL);
+}
+#endif
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_strncmp (strncmp)
+ *
+ * PARAMETERS: string1 - First string
+ * string2 - Second string
+ * count - Maximum # of bytes to compare
+ *
+ * RETURN: Index where strings mismatched, or 0 if strings matched
+ *
+ * DESCRIPTION: Compare two null terminated strings, with a maximum length
+ *
+ ******************************************************************************/
+
+int acpi_ut_strncmp(const char *string1, const char *string2, acpi_size count)
+{
+
+ for (; count-- && (*string1 == *string2); string2++) {
+ if (!*string1++) {
+ return (0);
+ }
+ }
+
+ return ((count == ACPI_SIZE_MAX) ? 0 : ((unsigned char)*string1 -
+ (unsigned char)*string2));
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_strcat (Strcat)
+ *
+ * PARAMETERS: dst_string - Target of the copy
+ * src_string - The source string to copy
+ *
+ * RETURN: dst_string
+ *
+ * DESCRIPTION: Append a null terminated string to a null terminated string
+ *
+ ******************************************************************************/
+
+char *acpi_ut_strcat(char *dst_string, const char *src_string)
+{
+ char *string;
+
+ /* Find end of the destination string */
+
+ for (string = dst_string; *string++;) {;
+ }
+
+ /* Concatenate the string */
+
+ for (--string; (*string++ = *src_string++);) {;
+ }
+
+ return (dst_string);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_strncat (strncat)
+ *
+ * PARAMETERS: dst_string - Target of the copy
+ * src_string - The source string to copy
+ * count - Maximum # of bytes to copy
+ *
+ * RETURN: dst_string
+ *
+ * DESCRIPTION: Append a null terminated string to a null terminated string,
+ * with a maximum count.
+ *
+ ******************************************************************************/
+
+char *acpi_ut_strncat(char *dst_string, const char *src_string, acpi_size count)
+{
+ char *string;
+
+ if (count) {
+
+ /* Find end of the destination string */
+
+ for (string = dst_string; *string++;) {;
+ }
+
+ /* Concatenate the string */
+
+ for (--string; (*string++ = *src_string++) && --count;) {;
+ }
+
+ /* Null terminate if necessary */
+
+ if (!count) {
+ *string = 0;
+ }
+ }
+
+ return (dst_string);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_strstr (strstr)
+ *
+ * PARAMETERS: string1 - Target string
+ * string2 - Substring to search for
+ *
+ * RETURN: Where substring match starts, Null if no match found
+ *
+ * DESCRIPTION: Checks if String2 occurs in String1. This is not really a
+ * full implementation of strstr, only sufficient for command
+ * matching
+ *
+ ******************************************************************************/
+
+char *acpi_ut_strstr(char *string1, char *string2)
+{
+ char *string;
+
+ if (acpi_ut_strlen(string2) > acpi_ut_strlen(string1)) {
+ return (NULL);
+ }
+
+ /* Walk entire string, comparing the letters */
+
+ for (string = string1; *string2;) {
+ if (*string2 != *string) {
+ return (NULL);
+ }
+
+ string2++;
+ string++;
+ }
+
+ return (string1);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_strtoul (strtoul)
+ *
+ * PARAMETERS: string - Null terminated string
+ * terminater - Where a pointer to the terminating byte is
+ * returned
+ * base - Radix of the string
+ *
+ * RETURN: Converted value
+ *
+ * DESCRIPTION: Convert a string into a 32-bit unsigned value.
+ * Note: use acpi_ut_strtoul64 for 64-bit integers.
+ *
+ ******************************************************************************/
+
+u32 acpi_ut_strtoul(const char *string, char **terminator, u32 base)
+{
+ u32 converted = 0;
+ u32 index;
+ u32 sign;
+ const char *string_start;
+ u32 return_value = 0;
+ acpi_status status = AE_OK;
+
+ /*
+ * Save the value of the pointer to the buffer's first
+ * character, save the current errno value, and then
+ * skip over any white space in the buffer:
+ */
+ string_start = string;
+ while (ACPI_IS_SPACE(*string) || *string == '\t') {
+ ++string;
+ }
+
+ /*
+ * The buffer may contain an optional plus or minus sign.
+ * If it does, then skip over it but remember what is was:
+ */
+ if (*string == '-') {
+ sign = NEGATIVE;
+ ++string;
+ } else if (*string == '+') {
+ ++string;
+ sign = POSITIVE;
+ } else {
+ sign = POSITIVE;
+ }
+
+ /*
+ * If the input parameter Base is zero, then we need to
+ * determine if it is octal, decimal, or hexadecimal:
+ */
+ if (base == 0) {
+ if (*string == '0') {
+ if (acpi_ut_to_lower(*(++string)) == 'x') {
+ base = 16;
+ ++string;
+ } else {
+ base = 8;
+ }
+ } else {
+ base = 10;
+ }
+ } else if (base < 2 || base > 36) {
+ /*
+ * The specified Base parameter is not in the domain of
+ * this function:
+ */
+ goto done;
+ }
+
+ /*
+ * For octal and hexadecimal bases, skip over the leading
+ * 0 or 0x, if they are present.
+ */
+ if (base == 8 && *string == '0') {
+ string++;
+ }
+
+ if (base == 16 &&
+ *string == '0' && acpi_ut_to_lower(*(++string)) == 'x') {
+ string++;
+ }
+
+ /*
+ * Main loop: convert the string to an unsigned long:
+ */
+ while (*string) {
+ if (ACPI_IS_DIGIT(*string)) {
+ index = (u32)((u8)*string - '0');
+ } else {
+ index = (u32)acpi_ut_to_upper(*string);
+ if (ACPI_IS_UPPER(index)) {
+ index = index - 'A' + 10;
+ } else {
+ goto done;
+ }
+ }
+
+ if (index >= base) {
+ goto done;
+ }
+
+ /*
+ * Check to see if value is out of range:
+ */
+
+ if (return_value > ((ACPI_UINT32_MAX - (u32)index) / (u32)base)) {
+ status = AE_ERROR;
+ return_value = 0; /* reset */
+ } else {
+ return_value *= base;
+ return_value += index;
+ converted = 1;
+ }
+
+ ++string;
+ }
+
+ done:
+ /*
+ * If appropriate, update the caller's pointer to the next
+ * unconverted character in the buffer.
+ */
+ if (terminator) {
+ if (converted == 0 && return_value == 0 && string != NULL) {
+ *terminator = (char *)string_start;
+ } else {
+ *terminator = (char *)string;
+ }
+ }
+
+ if (status == AE_ERROR) {
+ return_value = ACPI_UINT32_MAX;
+ }
+
+ /*
+ * If a minus sign was present, then "the conversion is negated":
+ */
+ if (sign == NEGATIVE) {
+ return_value = (ACPI_UINT32_MAX - return_value) + 1;
+ }
+
+ return (return_value);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_to_upper (TOUPPER)
+ *
+ * PARAMETERS: c - Character to convert
+ *
+ * RETURN: Converted character as an int
+ *
+ * DESCRIPTION: Convert character to uppercase
+ *
+ ******************************************************************************/
+
+int acpi_ut_to_upper(int c)
+{
+
+ return (ACPI_IS_LOWER(c) ? ((c) - 0x20) : (c));
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_to_lower (TOLOWER)
+ *
+ * PARAMETERS: c - Character to convert
+ *
+ * RETURN: Converted character as an int
+ *
+ * DESCRIPTION: Convert character to lowercase
+ *
+ ******************************************************************************/
+
+int acpi_ut_to_lower(int c)
+{
+
+ return (ACPI_IS_UPPER(c) ? ((c) + 0x20) : (c));
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: is* functions
+ *
+ * DESCRIPTION: is* functions use the ctype table below
+ *
+ ******************************************************************************/
+
+const u8 _acpi_ctype[257] = {
+ _ACPI_CN, /* 0x00 0 NUL */
+ _ACPI_CN, /* 0x01 1 SOH */
+ _ACPI_CN, /* 0x02 2 STX */
+ _ACPI_CN, /* 0x03 3 ETX */
+ _ACPI_CN, /* 0x04 4 EOT */
+ _ACPI_CN, /* 0x05 5 ENQ */
+ _ACPI_CN, /* 0x06 6 ACK */
+ _ACPI_CN, /* 0x07 7 BEL */
+ _ACPI_CN, /* 0x08 8 BS */
+ _ACPI_CN | _ACPI_SP, /* 0x09 9 TAB */
+ _ACPI_CN | _ACPI_SP, /* 0x0A 10 LF */
+ _ACPI_CN | _ACPI_SP, /* 0x0B 11 VT */
+ _ACPI_CN | _ACPI_SP, /* 0x0C 12 FF */
+ _ACPI_CN | _ACPI_SP, /* 0x0D 13 CR */
+ _ACPI_CN, /* 0x0E 14 SO */
+ _ACPI_CN, /* 0x0F 15 SI */
+ _ACPI_CN, /* 0x10 16 DLE */
+ _ACPI_CN, /* 0x11 17 DC1 */
+ _ACPI_CN, /* 0x12 18 DC2 */
+ _ACPI_CN, /* 0x13 19 DC3 */
+ _ACPI_CN, /* 0x14 20 DC4 */
+ _ACPI_CN, /* 0x15 21 NAK */
+ _ACPI_CN, /* 0x16 22 SYN */
+ _ACPI_CN, /* 0x17 23 ETB */
+ _ACPI_CN, /* 0x18 24 CAN */
+ _ACPI_CN, /* 0x19 25 EM */
+ _ACPI_CN, /* 0x1A 26 SUB */
+ _ACPI_CN, /* 0x1B 27 ESC */
+ _ACPI_CN, /* 0x1C 28 FS */
+ _ACPI_CN, /* 0x1D 29 GS */
+ _ACPI_CN, /* 0x1E 30 RS */
+ _ACPI_CN, /* 0x1F 31 US */
+ _ACPI_XS | _ACPI_SP, /* 0x20 32 ' ' */
+ _ACPI_PU, /* 0x21 33 '!' */
+ _ACPI_PU, /* 0x22 34 '"' */
+ _ACPI_PU, /* 0x23 35 '#' */
+ _ACPI_PU, /* 0x24 36 '$' */
+ _ACPI_PU, /* 0x25 37 '%' */
+ _ACPI_PU, /* 0x26 38 '&' */
+ _ACPI_PU, /* 0x27 39 ''' */
+ _ACPI_PU, /* 0x28 40 '(' */
+ _ACPI_PU, /* 0x29 41 ')' */
+ _ACPI_PU, /* 0x2A 42 '*' */
+ _ACPI_PU, /* 0x2B 43 '+' */
+ _ACPI_PU, /* 0x2C 44 ',' */
+ _ACPI_PU, /* 0x2D 45 '-' */
+ _ACPI_PU, /* 0x2E 46 '.' */
+ _ACPI_PU, /* 0x2F 47 '/' */
+ _ACPI_XD | _ACPI_DI, /* 0x30 48 '0' */
+ _ACPI_XD | _ACPI_DI, /* 0x31 49 '1' */
+ _ACPI_XD | _ACPI_DI, /* 0x32 50 '2' */
+ _ACPI_XD | _ACPI_DI, /* 0x33 51 '3' */
+ _ACPI_XD | _ACPI_DI, /* 0x34 52 '4' */
+ _ACPI_XD | _ACPI_DI, /* 0x35 53 '5' */
+ _ACPI_XD | _ACPI_DI, /* 0x36 54 '6' */
+ _ACPI_XD | _ACPI_DI, /* 0x37 55 '7' */
+ _ACPI_XD | _ACPI_DI, /* 0x38 56 '8' */
+ _ACPI_XD | _ACPI_DI, /* 0x39 57 '9' */
+ _ACPI_PU, /* 0x3A 58 ':' */
+ _ACPI_PU, /* 0x3B 59 ';' */
+ _ACPI_PU, /* 0x3C 60 '<' */
+ _ACPI_PU, /* 0x3D 61 '=' */
+ _ACPI_PU, /* 0x3E 62 '>' */
+ _ACPI_PU, /* 0x3F 63 '?' */
+ _ACPI_PU, /* 0x40 64 '@' */
+ _ACPI_XD | _ACPI_UP, /* 0x41 65 'A' */
+ _ACPI_XD | _ACPI_UP, /* 0x42 66 'B' */
+ _ACPI_XD | _ACPI_UP, /* 0x43 67 'C' */
+ _ACPI_XD | _ACPI_UP, /* 0x44 68 'D' */
+ _ACPI_XD | _ACPI_UP, /* 0x45 69 'E' */
+ _ACPI_XD | _ACPI_UP, /* 0x46 70 'F' */
+ _ACPI_UP, /* 0x47 71 'G' */
+ _ACPI_UP, /* 0x48 72 'H' */
+ _ACPI_UP, /* 0x49 73 'I' */
+ _ACPI_UP, /* 0x4A 74 'J' */
+ _ACPI_UP, /* 0x4B 75 'K' */
+ _ACPI_UP, /* 0x4C 76 'L' */
+ _ACPI_UP, /* 0x4D 77 'M' */
+ _ACPI_UP, /* 0x4E 78 'N' */
+ _ACPI_UP, /* 0x4F 79 'O' */
+ _ACPI_UP, /* 0x50 80 'P' */
+ _ACPI_UP, /* 0x51 81 'Q' */
+ _ACPI_UP, /* 0x52 82 'R' */
+ _ACPI_UP, /* 0x53 83 'S' */
+ _ACPI_UP, /* 0x54 84 'T' */
+ _ACPI_UP, /* 0x55 85 'U' */
+ _ACPI_UP, /* 0x56 86 'V' */
+ _ACPI_UP, /* 0x57 87 'W' */
+ _ACPI_UP, /* 0x58 88 'X' */
+ _ACPI_UP, /* 0x59 89 'Y' */
+ _ACPI_UP, /* 0x5A 90 'Z' */
+ _ACPI_PU, /* 0x5B 91 '[' */
+ _ACPI_PU, /* 0x5C 92 '\' */
+ _ACPI_PU, /* 0x5D 93 ']' */
+ _ACPI_PU, /* 0x5E 94 '^' */
+ _ACPI_PU, /* 0x5F 95 '_' */
+ _ACPI_PU, /* 0x60 96 '`' */
+ _ACPI_XD | _ACPI_LO, /* 0x61 97 'a' */
+ _ACPI_XD | _ACPI_LO, /* 0x62 98 'b' */
+ _ACPI_XD | _ACPI_LO, /* 0x63 99 'c' */
+ _ACPI_XD | _ACPI_LO, /* 0x64 100 'd' */
+ _ACPI_XD | _ACPI_LO, /* 0x65 101 'e' */
+ _ACPI_XD | _ACPI_LO, /* 0x66 102 'f' */
+ _ACPI_LO, /* 0x67 103 'g' */
+ _ACPI_LO, /* 0x68 104 'h' */
+ _ACPI_LO, /* 0x69 105 'i' */
+ _ACPI_LO, /* 0x6A 106 'j' */
+ _ACPI_LO, /* 0x6B 107 'k' */
+ _ACPI_LO, /* 0x6C 108 'l' */
+ _ACPI_LO, /* 0x6D 109 'm' */
+ _ACPI_LO, /* 0x6E 110 'n' */
+ _ACPI_LO, /* 0x6F 111 'o' */
+ _ACPI_LO, /* 0x70 112 'p' */
+ _ACPI_LO, /* 0x71 113 'q' */
+ _ACPI_LO, /* 0x72 114 'r' */
+ _ACPI_LO, /* 0x73 115 's' */
+ _ACPI_LO, /* 0x74 116 't' */
+ _ACPI_LO, /* 0x75 117 'u' */
+ _ACPI_LO, /* 0x76 118 'v' */
+ _ACPI_LO, /* 0x77 119 'w' */
+ _ACPI_LO, /* 0x78 120 'x' */
+ _ACPI_LO, /* 0x79 121 'y' */
+ _ACPI_LO, /* 0x7A 122 'z' */
+ _ACPI_PU, /* 0x7B 123 '{' */
+ _ACPI_PU, /* 0x7C 124 '|' */
+ _ACPI_PU, /* 0x7D 125 '}' */
+ _ACPI_PU, /* 0x7E 126 '~' */
+ _ACPI_CN, /* 0x7F 127 DEL */
+
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 0x80 to 0x8F */
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 0x90 to 0x9F */
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 0xA0 to 0xAF */
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 0xB0 to 0xBF */
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 0xC0 to 0xCF */
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 0xD0 to 0xDF */
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 0xE0 to 0xEF */
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 0xF0 to 0xFF */
+ 0 /* 0x100 */
+};
+
+#endif /* ACPI_USE_SYSTEM_CLIBRARY */
diff --git a/drivers/acpi/acpica/utdebug.c b/drivers/acpi/acpica/utdebug.c
index e810894..5d95166 100644
--- a/drivers/acpi/acpica/utdebug.c
+++ b/drivers/acpi/acpica/utdebug.c
@@ -47,8 +47,9 @@
#define _COMPONENT ACPI_UTILITIES
ACPI_MODULE_NAME("utdebug")
+
#ifdef ACPI_DEBUG_OUTPUT
-static acpi_thread_id acpi_gbl_prev_thread_id;
+static acpi_thread_id acpi_gbl_prev_thread_id = (acpi_thread_id) 0xFFFFFFFF;
static char *acpi_gbl_fn_entry_str = "----Entry";
static char *acpi_gbl_fn_exit_str = "----Exit-";
@@ -109,7 +110,7 @@
* RETURN: Updated pointer to the function name
*
* DESCRIPTION: Remove the "Acpi" prefix from the function name, if present.
- * This allows compiler macros such as __func__ to be used
+ * This allows compiler macros such as __FUNCTION__ to be used
* with no change to the debug output.
*
******************************************************************************/
@@ -222,7 +223,7 @@
*
* RETURN: None
*
- * DESCRIPTION: Print message with no headers. Has same interface as
+ * DESCRIPTION: Print message with no headers. Has same interface as
* debug_print so that the same macros can be used.
*
******************************************************************************/
@@ -258,7 +259,7 @@
*
* RETURN: None
*
- * DESCRIPTION: Function entry trace. Prints only if TRACE_FUNCTIONS bit is
+ * DESCRIPTION: Function entry trace. Prints only if TRACE_FUNCTIONS bit is
* set in debug_level
*
******************************************************************************/
@@ -290,7 +291,7 @@
*
* RETURN: None
*
- * DESCRIPTION: Function entry trace. Prints only if TRACE_FUNCTIONS bit is
+ * DESCRIPTION: Function entry trace. Prints only if TRACE_FUNCTIONS bit is
* set in debug_level
*
******************************************************************************/
@@ -299,6 +300,7 @@
const char *function_name,
const char *module_name, u32 component_id, void *pointer)
{
+
acpi_gbl_nesting_level++;
acpi_ut_track_stack_ptr();
@@ -319,7 +321,7 @@
*
* RETURN: None
*
- * DESCRIPTION: Function entry trace. Prints only if TRACE_FUNCTIONS bit is
+ * DESCRIPTION: Function entry trace. Prints only if TRACE_FUNCTIONS bit is
* set in debug_level
*
******************************************************************************/
@@ -350,7 +352,7 @@
*
* RETURN: None
*
- * DESCRIPTION: Function entry trace. Prints only if TRACE_FUNCTIONS bit is
+ * DESCRIPTION: Function entry trace. Prints only if TRACE_FUNCTIONS bit is
* set in debug_level
*
******************************************************************************/
@@ -380,7 +382,7 @@
*
* RETURN: None
*
- * DESCRIPTION: Function exit trace. Prints only if TRACE_FUNCTIONS bit is
+ * DESCRIPTION: Function exit trace. Prints only if TRACE_FUNCTIONS bit is
* set in debug_level
*
******************************************************************************/
@@ -412,7 +414,7 @@
*
* RETURN: None
*
- * DESCRIPTION: Function exit trace. Prints only if TRACE_FUNCTIONS bit is
+ * DESCRIPTION: Function exit trace. Prints only if TRACE_FUNCTIONS bit is
* set in debug_level. Prints exit status also.
*
******************************************************************************/
@@ -453,7 +455,7 @@
*
* RETURN: None
*
- * DESCRIPTION: Function exit trace. Prints only if TRACE_FUNCTIONS bit is
+ * DESCRIPTION: Function exit trace. Prints only if TRACE_FUNCTIONS bit is
* set in debug_level. Prints exit value also.
*
******************************************************************************/
@@ -485,7 +487,7 @@
*
* RETURN: None
*
- * DESCRIPTION: Function exit trace. Prints only if TRACE_FUNCTIONS bit is
+ * DESCRIPTION: Function exit trace. Prints only if TRACE_FUNCTIONS bit is
* set in debug_level. Prints exit value also.
*
******************************************************************************/
@@ -511,7 +513,7 @@
* PARAMETERS: buffer - Buffer to dump
* count - Amount to dump, in bytes
* display - BYTE, WORD, DWORD, or QWORD display
- * component_ID - Caller's component ID
+ * offset - Beginning buffer offset (display only)
*
* RETURN: None
*
@@ -519,7 +521,7 @@
*
******************************************************************************/
-void acpi_ut_dump_buffer2(u8 * buffer, u32 count, u32 display)
+void acpi_ut_dump_buffer(u8 *buffer, u32 count, u32 display, u32 base_offset)
{
u32 i = 0;
u32 j;
@@ -541,7 +543,7 @@
/* Print current offset */
- acpi_os_printf("%6.4X: ", i);
+ acpi_os_printf("%6.4X: ", (base_offset + i));
/* Print 16 hex chars */
@@ -623,7 +625,7 @@
/*******************************************************************************
*
- * FUNCTION: acpi_ut_dump_buffer
+ * FUNCTION: acpi_ut_debug_dump_buffer
*
* PARAMETERS: buffer - Buffer to dump
* count - Amount to dump, in bytes
@@ -636,7 +638,8 @@
*
******************************************************************************/
-void acpi_ut_dump_buffer(u8 * buffer, u32 count, u32 display, u32 component_id)
+void
+acpi_ut_debug_dump_buffer(u8 *buffer, u32 count, u32 display, u32 component_id)
{
/* Only dump the buffer if tracing is enabled */
@@ -646,5 +649,5 @@
return;
}
- acpi_ut_dump_buffer2(buffer, count, display);
+ acpi_ut_dump_buffer(buffer, count, display, 0);
}
diff --git a/drivers/acpi/acpica/utids.c b/drivers/acpi/acpica/utids.c
index 5d84e19..774c3ae 100644
--- a/drivers/acpi/acpica/utids.c
+++ b/drivers/acpi/acpica/utids.c
@@ -67,10 +67,10 @@
******************************************************************************/
acpi_status
acpi_ut_execute_HID(struct acpi_namespace_node *device_node,
- struct acpica_device_id **return_id)
+ struct acpi_pnp_device_id **return_id)
{
union acpi_operand_object *obj_desc;
- struct acpica_device_id *hid;
+ struct acpi_pnp_device_id *hid;
u32 length;
acpi_status status;
@@ -94,16 +94,17 @@
/* Allocate a buffer for the HID */
hid =
- ACPI_ALLOCATE_ZEROED(sizeof(struct acpica_device_id) +
+ ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_pnp_device_id) +
(acpi_size) length);
if (!hid) {
status = AE_NO_MEMORY;
goto cleanup;
}
- /* Area for the string starts after DEVICE_ID struct */
+ /* Area for the string starts after PNP_DEVICE_ID struct */
- hid->string = ACPI_ADD_PTR(char, hid, sizeof(struct acpica_device_id));
+ hid->string =
+ ACPI_ADD_PTR(char, hid, sizeof(struct acpi_pnp_device_id));
/* Convert EISAID to a string or simply copy existing string */
@@ -126,6 +127,73 @@
/*******************************************************************************
*
+ * FUNCTION: acpi_ut_execute_SUB
+ *
+ * PARAMETERS: device_node - Node for the device
+ * return_id - Where the _SUB is returned
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Executes the _SUB control method that returns the subsystem
+ * ID of the device. The _SUB value is always a string containing
+ * either a valid PNP or ACPI ID.
+ *
+ * NOTE: Internal function, no parameter validation
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ut_execute_SUB(struct acpi_namespace_node *device_node,
+ struct acpi_pnp_device_id **return_id)
+{
+ union acpi_operand_object *obj_desc;
+ struct acpi_pnp_device_id *sub;
+ u32 length;
+ acpi_status status;
+
+ ACPI_FUNCTION_TRACE(ut_execute_SUB);
+
+ status = acpi_ut_evaluate_object(device_node, METHOD_NAME__SUB,
+ ACPI_BTYPE_STRING, &obj_desc);
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+
+ /* Get the size of the String to be returned, includes null terminator */
+
+ length = obj_desc->string.length + 1;
+
+ /* Allocate a buffer for the SUB */
+
+ sub =
+ ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_pnp_device_id) +
+ (acpi_size) length);
+ if (!sub) {
+ status = AE_NO_MEMORY;
+ goto cleanup;
+ }
+
+ /* Area for the string starts after PNP_DEVICE_ID struct */
+
+ sub->string =
+ ACPI_ADD_PTR(char, sub, sizeof(struct acpi_pnp_device_id));
+
+ /* Simply copy existing string */
+
+ ACPI_STRCPY(sub->string, obj_desc->string.pointer);
+ sub->length = length;
+ *return_id = sub;
+
+ cleanup:
+
+ /* On exit, we must delete the return object */
+
+ acpi_ut_remove_reference(obj_desc);
+ return_ACPI_STATUS(status);
+}
+
+/*******************************************************************************
+ *
* FUNCTION: acpi_ut_execute_UID
*
* PARAMETERS: device_node - Node for the device
@@ -144,10 +212,10 @@
acpi_status
acpi_ut_execute_UID(struct acpi_namespace_node *device_node,
- struct acpica_device_id **return_id)
+ struct acpi_pnp_device_id **return_id)
{
union acpi_operand_object *obj_desc;
- struct acpica_device_id *uid;
+ struct acpi_pnp_device_id *uid;
u32 length;
acpi_status status;
@@ -171,16 +239,17 @@
/* Allocate a buffer for the UID */
uid =
- ACPI_ALLOCATE_ZEROED(sizeof(struct acpica_device_id) +
+ ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_pnp_device_id) +
(acpi_size) length);
if (!uid) {
status = AE_NO_MEMORY;
goto cleanup;
}
- /* Area for the string starts after DEVICE_ID struct */
+ /* Area for the string starts after PNP_DEVICE_ID struct */
- uid->string = ACPI_ADD_PTR(char, uid, sizeof(struct acpica_device_id));
+ uid->string =
+ ACPI_ADD_PTR(char, uid, sizeof(struct acpi_pnp_device_id));
/* Convert an Integer to string, or just copy an existing string */
@@ -226,11 +295,11 @@
acpi_status
acpi_ut_execute_CID(struct acpi_namespace_node *device_node,
- struct acpica_device_id_list **return_cid_list)
+ struct acpi_pnp_device_id_list **return_cid_list)
{
union acpi_operand_object **cid_objects;
union acpi_operand_object *obj_desc;
- struct acpica_device_id_list *cid_list;
+ struct acpi_pnp_device_id_list *cid_list;
char *next_id_string;
u32 string_area_size;
u32 length;
@@ -288,11 +357,12 @@
/*
* Now that we know the length of the CIDs, allocate return buffer:
* 1) Size of the base structure +
- * 2) Size of the CID DEVICE_ID array +
+ * 2) Size of the CID PNP_DEVICE_ID array +
* 3) Size of the actual CID strings
*/
- cid_list_size = sizeof(struct acpica_device_id_list) +
- ((count - 1) * sizeof(struct acpica_device_id)) + string_area_size;
+ cid_list_size = sizeof(struct acpi_pnp_device_id_list) +
+ ((count - 1) * sizeof(struct acpi_pnp_device_id)) +
+ string_area_size;
cid_list = ACPI_ALLOCATE_ZEROED(cid_list_size);
if (!cid_list) {
@@ -300,10 +370,10 @@
goto cleanup;
}
- /* Area for CID strings starts after the CID DEVICE_ID array */
+ /* Area for CID strings starts after the CID PNP_DEVICE_ID array */
next_id_string = ACPI_CAST_PTR(char, cid_list->ids) +
- ((acpi_size) count * sizeof(struct acpica_device_id));
+ ((acpi_size) count * sizeof(struct acpi_pnp_device_id));
/* Copy/convert the CIDs to the return buffer */
diff --git a/drivers/acpi/acpica/utmath.c b/drivers/acpi/acpica/utmath.c
index d88a8aa..4956367 100644
--- a/drivers/acpi/acpica/utmath.c
+++ b/drivers/acpi/acpica/utmath.c
@@ -81,7 +81,7 @@
* RETURN: Status (Checks for divide-by-zero)
*
* DESCRIPTION: Perform a short (maximum 64 bits divided by 32 bits)
- * divide and modulo. The result is a 64-bit quotient and a
+ * divide and modulo. The result is a 64-bit quotient and a
* 32-bit remainder.
*
******************************************************************************/
diff --git a/drivers/acpi/acpica/utmisc.c b/drivers/acpi/acpica/utmisc.c
index 33c6cf7..9286a69 100644
--- a/drivers/acpi/acpica/utmisc.c
+++ b/drivers/acpi/acpica/utmisc.c
@@ -41,8 +41,6 @@
* POSSIBILITY OF SUCH DAMAGES.
*/
-#include <linux/module.h>
-
#include <acpi/acpi.h>
#include "accommon.h"
#include "acnamesp.h"
@@ -201,8 +199,8 @@
*/
acpi_gbl_owner_id_mask[j] |= (1 << k);
- acpi_gbl_last_owner_id_index = (u8) j;
- acpi_gbl_next_owner_id_offset = (u8) (k + 1);
+ acpi_gbl_last_owner_id_index = (u8)j;
+ acpi_gbl_next_owner_id_offset = (u8)(k + 1);
/*
* Construct encoded ID from the index and bit position
@@ -252,7 +250,7 @@
* control method or unloading a table. Either way, we would
* ignore any error anyway.
*
- * DESCRIPTION: Release a table or method owner ID. Valid IDs are 1 - 255
+ * DESCRIPTION: Release a table or method owner ID. Valid IDs are 1 - 255
*
******************************************************************************/
@@ -339,6 +337,73 @@
return;
}
+#ifdef ACPI_ASL_COMPILER
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_strlwr (strlwr)
+ *
+ * PARAMETERS: src_string - The source string to convert
+ *
+ * RETURN: None
+ *
+ * DESCRIPTION: Convert string to lowercase
+ *
+ * NOTE: This is not a POSIX function, so it appears here, not in utclib.c
+ *
+ ******************************************************************************/
+
+void acpi_ut_strlwr(char *src_string)
+{
+ char *string;
+
+ ACPI_FUNCTION_ENTRY();
+
+ if (!src_string) {
+ return;
+ }
+
+ /* Walk entire string, lowercasing the letters */
+
+ for (string = src_string; *string; string++) {
+ *string = (char)ACPI_TOLOWER(*string);
+ }
+
+ return;
+}
+
+/******************************************************************************
+ *
+ * FUNCTION: acpi_ut_stricmp
+ *
+ * PARAMETERS: string1 - first string to compare
+ * string2 - second string to compare
+ *
+ * RETURN: int that signifies string relationship. Zero means strings
+ * are equal.
+ *
+ * DESCRIPTION: Implementation of the non-ANSI stricmp function (compare
+ * strings with no case sensitivity)
+ *
+ ******************************************************************************/
+
+int acpi_ut_stricmp(char *string1, char *string2)
+{
+ int c1;
+ int c2;
+
+ do {
+ c1 = tolower((int)*string1);
+ c2 = tolower((int)*string2);
+
+ string1++;
+ string2++;
+ }
+ while ((c1 == c2) && (c1));
+
+ return (c1 - c2);
+}
+#endif
+
/*******************************************************************************
*
* FUNCTION: acpi_ut_print_string
@@ -469,8 +534,8 @@
* RETURN: None
*
* DESCRIPTION: Set the global integer bit width based upon the revision
- * of the DSDT. For Revision 1 and 0, Integers are 32 bits.
- * For Revision 2 and above, Integers are 64 bits. Yes, this
+ * of the DSDT. For Revision 1 and 0, Integers are 32 bits.
+ * For Revision 2 and above, Integers are 64 bits. Yes, this
* makes a difference.
*
******************************************************************************/
@@ -606,7 +671,7 @@
*
* RETURN: TRUE if the name is valid, FALSE otherwise
*
- * DESCRIPTION: Check for a valid ACPI name. Each character must be one of:
+ * DESCRIPTION: Check for a valid ACPI name. Each character must be one of:
* 1) Upper case alpha
* 2) numeric
* 3) underscore
@@ -638,29 +703,59 @@
* RETURN: Repaired version of the name
*
* DESCRIPTION: Repair an ACPI name: Change invalid characters to '*' and
- * return the new name.
+ * return the new name. NOTE: the Name parameter must reside in
+ * read/write memory, cannot be a const.
+ *
+ * An ACPI Name must consist of valid ACPI characters. We will repair the name
+ * if necessary because we don't want to abort because of this, but we want
+ * all namespace names to be printable. A warning message is appropriate.
+ *
+ * This issue came up because there are in fact machines that exhibit
+ * this problem, and we want to be able to enable ACPI support for them,
+ * even though there are a few bad names.
*
******************************************************************************/
-acpi_name acpi_ut_repair_name(char *name)
+void acpi_ut_repair_name(char *name)
{
- u32 i;
- char new_name[ACPI_NAME_SIZE];
+ u32 i;
+ u8 found_bad_char = FALSE;
+ u32 original_name;
+
+ ACPI_FUNCTION_NAME(ut_repair_name);
+
+ ACPI_MOVE_NAME(&original_name, name);
+
+ /* Check each character in the name */
for (i = 0; i < ACPI_NAME_SIZE; i++) {
- new_name[i] = name[i];
+ if (acpi_ut_valid_acpi_char(name[i], i)) {
+ continue;
+ }
/*
* Replace a bad character with something printable, yet technically
* still invalid. This prevents any collisions with existing "good"
* names in the namespace.
*/
- if (!acpi_ut_valid_acpi_char(name[i], i)) {
- new_name[i] = '*';
- }
+ name[i] = '*';
+ found_bad_char = TRUE;
}
- return (*(u32 *) new_name);
+ if (found_bad_char) {
+
+ /* Report warning only if in strict mode or debug mode */
+
+ if (!acpi_gbl_enable_interpreter_slack) {
+ ACPI_WARNING((AE_INFO,
+ "Found bad character(s) in name, repaired: [%4.4s]\n",
+ name));
+ } else {
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+ "Found bad character(s) in name, repaired: [%4.4s]\n",
+ name));
+ }
+ }
}
/*******************************************************************************
@@ -681,7 +776,7 @@
*
******************************************************************************/
-acpi_status acpi_ut_strtoul64(char *string, u32 base, u64 * ret_integer)
+acpi_status acpi_ut_strtoul64(char *string, u32 base, u64 *ret_integer)
{
u32 this_digit = 0;
u64 return_value = 0;
@@ -754,14 +849,14 @@
/* Convert ASCII 0-9 to Decimal value */
- this_digit = ((u8) * string) - '0';
+ this_digit = ((u8)*string) - '0';
} else if (base == 10) {
/* Digit is out of range; possible in to_integer case only */
term = 1;
} else {
- this_digit = (u8) ACPI_TOUPPER(*string);
+ this_digit = (u8)ACPI_TOUPPER(*string);
if (ACPI_IS_XDIGIT((char)this_digit)) {
/* Convert ASCII Hex char to value */
@@ -788,8 +883,9 @@
valid_digits++;
- if (sign_of0x && ((valid_digits > 16)
- || ((valid_digits > 8) && mode32))) {
+ if (sign_of0x
+ && ((valid_digits > 16)
+ || ((valid_digits > 8) && mode32))) {
/*
* This is to_integer operation case.
* No any restrictions for string-to-integer conversion,
@@ -800,7 +896,7 @@
/* Divide the digit into the correct position */
- (void)acpi_ut_short_divide((dividend - (u64) this_digit),
+ (void)acpi_ut_short_divide((dividend - (u64)this_digit),
base, "ient, NULL);
if (return_value > quotient) {
@@ -890,7 +986,7 @@
******************************************************************************/
acpi_status
-acpi_ut_walk_package_tree(union acpi_operand_object * source_object,
+acpi_ut_walk_package_tree(union acpi_operand_object *source_object,
void *target_object,
acpi_pkg_callback walk_callback, void *context)
{
@@ -917,10 +1013,10 @@
/*
* Check for:
- * 1) An uninitialized package element. It is completely
+ * 1) An uninitialized package element. It is completely
* legal to declare a package and leave it uninitialized
* 2) Not an internal object - can be a namespace node instead
- * 3) Any type other than a package. Packages are handled in else
+ * 3) Any type other than a package. Packages are handled in else
* case below.
*/
if ((!this_source_obj) ||
@@ -939,7 +1035,7 @@
state->pkg.source_object->package.count) {
/*
* We've handled all of the objects at this level, This means
- * that we have just completed a package. That package may
+ * that we have just completed a package. That package may
* have contained one or more packages itself.
*
* Delete this state and pop the previous state (package).
diff --git a/drivers/acpi/acpica/utmutex.c b/drivers/acpi/acpica/utmutex.c
index 296baa6..5ccf57c 100644
--- a/drivers/acpi/acpica/utmutex.c
+++ b/drivers/acpi/acpica/utmutex.c
@@ -193,6 +193,8 @@
acpi_gbl_mutex_info[mutex_id].mutex = NULL;
acpi_gbl_mutex_info[mutex_id].thread_id = ACPI_MUTEX_NOT_ACQUIRED;
+
+ return_VOID;
}
/*******************************************************************************
@@ -226,9 +228,9 @@
/*
* Mutex debug code, for internal debugging only.
*
- * Deadlock prevention. Check if this thread owns any mutexes of value
- * greater than or equal to this one. If so, the thread has violated
- * the mutex ordering rule. This indicates a coding error somewhere in
+ * Deadlock prevention. Check if this thread owns any mutexes of value
+ * greater than or equal to this one. If so, the thread has violated
+ * the mutex ordering rule. This indicates a coding error somewhere in
* the ACPI subsystem code.
*/
for (i = mutex_id; i < ACPI_NUM_MUTEX; i++) {
@@ -319,9 +321,9 @@
/*
* Mutex debug code, for internal debugging only.
*
- * Deadlock prevention. Check if this thread owns any mutexes of value
- * greater than this one. If so, the thread has violated the mutex
- * ordering rule. This indicates a coding error somewhere in
+ * Deadlock prevention. Check if this thread owns any mutexes of value
+ * greater than this one. If so, the thread has violated the mutex
+ * ordering rule. This indicates a coding error somewhere in
* the ACPI subsystem code.
*/
for (i = mutex_id; i < ACPI_NUM_MUTEX; i++) {
diff --git a/drivers/acpi/acpica/utobject.c b/drivers/acpi/acpica/utobject.c
index 655f079..5c52ca7 100644
--- a/drivers/acpi/acpica/utobject.c
+++ b/drivers/acpi/acpica/utobject.c
@@ -77,7 +77,7 @@
*
* NOTE: We always allocate the worst-case object descriptor because
* these objects are cached, and we want them to be
- * one-size-satisifies-any-request. This in itself may not be
+ * one-size-satisifies-any-request. This in itself may not be
* the most memory efficient, but the efficiency of the object
* cache should more than make up for this!
*
@@ -370,9 +370,9 @@
* line_number - Caller's line number (for error output)
* component_id - Caller's component ID (for error output)
*
- * RETURN: Pointer to newly allocated object descriptor. Null on error
+ * RETURN: Pointer to newly allocated object descriptor. Null on error
*
- * DESCRIPTION: Allocate a new object descriptor. Gracefully handle
+ * DESCRIPTION: Allocate a new object descriptor. Gracefully handle
* error conditions.
*
******************************************************************************/
@@ -554,7 +554,7 @@
/*
* Account for the space required by the object rounded up to the next
- * multiple of the machine word size. This keeps each object aligned
+ * multiple of the machine word size. This keeps each object aligned
* on a machine word boundary. (preventing alignment faults on some
* machines.)
*/
diff --git a/drivers/acpi/acpica/utstate.c b/drivers/acpi/acpica/utstate.c
index a1c9882..cee0473 100644
--- a/drivers/acpi/acpica/utstate.c
+++ b/drivers/acpi/acpica/utstate.c
@@ -147,7 +147,7 @@
*
* RETURN: The new state object. NULL on failure.
*
- * DESCRIPTION: Create a generic state object. Attempt to obtain one from
+ * DESCRIPTION: Create a generic state object. Attempt to obtain one from
* the global state cache; If none available, create a new one.
*
******************************************************************************/
diff --git a/drivers/acpi/acpica/uttrack.c b/drivers/acpi/acpica/uttrack.c
new file mode 100644
index 0000000..a424a9e
--- /dev/null
+++ b/drivers/acpi/acpica/uttrack.c
@@ -0,0 +1,692 @@
+/******************************************************************************
+ *
+ * Module Name: uttrack - Memory allocation tracking routines (debug only)
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2012, Intel Corp.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * substantially similar to the "NO WARRANTY" disclaimer below
+ * ("Disclaimer") and any redistribution must be conditioned upon
+ * including a substantially similar Disclaimer requirement for further
+ * binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ * of any contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+/*
+ * These procedures are used for tracking memory leaks in the subsystem, and
+ * they get compiled out when the ACPI_DBG_TRACK_ALLOCATIONS is not set.
+ *
+ * Each memory allocation is tracked via a doubly linked list. Each
+ * element contains the caller's component, module name, function name, and
+ * line number. acpi_ut_allocate and acpi_ut_allocate_zeroed call
+ * acpi_ut_track_allocation to add an element to the list; deletion
+ * occurs in the body of acpi_ut_free.
+ */
+
+#include <acpi/acpi.h>
+#include "accommon.h"
+
+#ifdef ACPI_DBG_TRACK_ALLOCATIONS
+
+#define _COMPONENT ACPI_UTILITIES
+ACPI_MODULE_NAME("uttrack")
+
+/* Local prototypes */
+static struct acpi_debug_mem_block *acpi_ut_find_allocation(struct
+ acpi_debug_mem_block
+ *allocation);
+
+static acpi_status
+acpi_ut_track_allocation(struct acpi_debug_mem_block *address,
+ acpi_size size,
+ u8 alloc_type,
+ u32 component, const char *module, u32 line);
+
+static acpi_status
+acpi_ut_remove_allocation(struct acpi_debug_mem_block *address,
+ u32 component, const char *module, u32 line);
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_create_list
+ *
+ * PARAMETERS: cache_name - Ascii name for the cache
+ * object_size - Size of each cached object
+ * return_cache - Where the new cache object is returned
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Create a local memory list for tracking purposed
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ut_create_list(char *list_name,
+ u16 object_size, struct acpi_memory_list **return_cache)
+{
+ struct acpi_memory_list *cache;
+
+ cache = acpi_os_allocate(sizeof(struct acpi_memory_list));
+ if (!cache) {
+ return (AE_NO_MEMORY);
+ }
+
+ ACPI_MEMSET(cache, 0, sizeof(struct acpi_memory_list));
+
+ cache->list_name = list_name;
+ cache->object_size = object_size;
+
+ *return_cache = cache;
+ return (AE_OK);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_allocate_and_track
+ *
+ * PARAMETERS: size - Size of the allocation
+ * component - Component type of caller
+ * module - Source file name of caller
+ * line - Line number of caller
+ *
+ * RETURN: Address of the allocated memory on success, NULL on failure.
+ *
+ * DESCRIPTION: The subsystem's equivalent of malloc.
+ *
+ ******************************************************************************/
+
+void *acpi_ut_allocate_and_track(acpi_size size,
+ u32 component, const char *module, u32 line)
+{
+ struct acpi_debug_mem_block *allocation;
+ acpi_status status;
+
+ allocation =
+ acpi_ut_allocate(size + sizeof(struct acpi_debug_mem_header),
+ component, module, line);
+ if (!allocation) {
+ return (NULL);
+ }
+
+ status = acpi_ut_track_allocation(allocation, size,
+ ACPI_MEM_MALLOC, component, module,
+ line);
+ if (ACPI_FAILURE(status)) {
+ acpi_os_free(allocation);
+ return (NULL);
+ }
+
+ acpi_gbl_global_list->total_allocated++;
+ acpi_gbl_global_list->total_size += (u32)size;
+ acpi_gbl_global_list->current_total_size += (u32)size;
+ if (acpi_gbl_global_list->current_total_size >
+ acpi_gbl_global_list->max_occupied) {
+ acpi_gbl_global_list->max_occupied =
+ acpi_gbl_global_list->current_total_size;
+ }
+
+ return ((void *)&allocation->user_space);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_allocate_zeroed_and_track
+ *
+ * PARAMETERS: size - Size of the allocation
+ * component - Component type of caller
+ * module - Source file name of caller
+ * line - Line number of caller
+ *
+ * RETURN: Address of the allocated memory on success, NULL on failure.
+ *
+ * DESCRIPTION: Subsystem equivalent of calloc.
+ *
+ ******************************************************************************/
+
+void *acpi_ut_allocate_zeroed_and_track(acpi_size size,
+ u32 component,
+ const char *module, u32 line)
+{
+ struct acpi_debug_mem_block *allocation;
+ acpi_status status;
+
+ allocation =
+ acpi_ut_allocate_zeroed(size + sizeof(struct acpi_debug_mem_header),
+ component, module, line);
+ if (!allocation) {
+
+ /* Report allocation error */
+
+ ACPI_ERROR((module, line,
+ "Could not allocate size %u", (u32)size));
+ return (NULL);
+ }
+
+ status = acpi_ut_track_allocation(allocation, size,
+ ACPI_MEM_CALLOC, component, module,
+ line);
+ if (ACPI_FAILURE(status)) {
+ acpi_os_free(allocation);
+ return (NULL);
+ }
+
+ acpi_gbl_global_list->total_allocated++;
+ acpi_gbl_global_list->total_size += (u32)size;
+ acpi_gbl_global_list->current_total_size += (u32)size;
+ if (acpi_gbl_global_list->current_total_size >
+ acpi_gbl_global_list->max_occupied) {
+ acpi_gbl_global_list->max_occupied =
+ acpi_gbl_global_list->current_total_size;
+ }
+
+ return ((void *)&allocation->user_space);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_free_and_track
+ *
+ * PARAMETERS: allocation - Address of the memory to deallocate
+ * component - Component type of caller
+ * module - Source file name of caller
+ * line - Line number of caller
+ *
+ * RETURN: None
+ *
+ * DESCRIPTION: Frees the memory at Allocation
+ *
+ ******************************************************************************/
+
+void
+acpi_ut_free_and_track(void *allocation,
+ u32 component, const char *module, u32 line)
+{
+ struct acpi_debug_mem_block *debug_block;
+ acpi_status status;
+
+ ACPI_FUNCTION_TRACE_PTR(ut_free, allocation);
+
+ if (NULL == allocation) {
+ ACPI_ERROR((module, line, "Attempt to delete a NULL address"));
+
+ return_VOID;
+ }
+
+ debug_block = ACPI_CAST_PTR(struct acpi_debug_mem_block,
+ (((char *)allocation) -
+ sizeof(struct acpi_debug_mem_header)));
+
+ acpi_gbl_global_list->total_freed++;
+ acpi_gbl_global_list->current_total_size -= debug_block->size;
+
+ status = acpi_ut_remove_allocation(debug_block,
+ component, module, line);
+ if (ACPI_FAILURE(status)) {
+ ACPI_EXCEPTION((AE_INFO, status, "Could not free memory"));
+ }
+
+ acpi_os_free(debug_block);
+ ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS, "%p freed\n", allocation));
+ return_VOID;
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_find_allocation
+ *
+ * PARAMETERS: allocation - Address of allocated memory
+ *
+ * RETURN: Three cases:
+ * 1) List is empty, NULL is returned.
+ * 2) Element was found. Returns Allocation parameter.
+ * 3) Element was not found. Returns position where it should be
+ * inserted into the list.
+ *
+ * DESCRIPTION: Searches for an element in the global allocation tracking list.
+ * If the element is not found, returns the location within the
+ * list where the element should be inserted.
+ *
+ * Note: The list is ordered by larger-to-smaller addresses.
+ *
+ * This global list is used to detect memory leaks in ACPICA as
+ * well as other issues such as an attempt to release the same
+ * internal object more than once. Although expensive as far
+ * as cpu time, this list is much more helpful for finding these
+ * types of issues than using memory leak detectors outside of
+ * the ACPICA code.
+ *
+ ******************************************************************************/
+
+static struct acpi_debug_mem_block *acpi_ut_find_allocation(struct
+ acpi_debug_mem_block
+ *allocation)
+{
+ struct acpi_debug_mem_block *element;
+
+ element = acpi_gbl_global_list->list_head;
+ if (!element) {
+ return (NULL);
+ }
+
+ /*
+ * Search for the address.
+ *
+ * Note: List is ordered by larger-to-smaller addresses, on the
+ * assumption that a new allocation usually has a larger address
+ * than previous allocations.
+ */
+ while (element > allocation) {
+
+ /* Check for end-of-list */
+
+ if (!element->next) {
+ return (element);
+ }
+
+ element = element->next;
+ }
+
+ if (element == allocation) {
+ return (element);
+ }
+
+ return (element->previous);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_track_allocation
+ *
+ * PARAMETERS: allocation - Address of allocated memory
+ * size - Size of the allocation
+ * alloc_type - MEM_MALLOC or MEM_CALLOC
+ * component - Component type of caller
+ * module - Source file name of caller
+ * line - Line number of caller
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Inserts an element into the global allocation tracking list.
+ *
+ ******************************************************************************/
+
+static acpi_status
+acpi_ut_track_allocation(struct acpi_debug_mem_block *allocation,
+ acpi_size size,
+ u8 alloc_type,
+ u32 component, const char *module, u32 line)
+{
+ struct acpi_memory_list *mem_list;
+ struct acpi_debug_mem_block *element;
+ acpi_status status = AE_OK;
+
+ ACPI_FUNCTION_TRACE_PTR(ut_track_allocation, allocation);
+
+ if (acpi_gbl_disable_mem_tracking) {
+ return_ACPI_STATUS(AE_OK);
+ }
+
+ mem_list = acpi_gbl_global_list;
+ status = acpi_ut_acquire_mutex(ACPI_MTX_MEMORY);
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+
+ /*
+ * Search the global list for this address to make sure it is not
+ * already present. This will catch several kinds of problems.
+ */
+ element = acpi_ut_find_allocation(allocation);
+ if (element == allocation) {
+ ACPI_ERROR((AE_INFO,
+ "UtTrackAllocation: Allocation (%p) already present in global list!",
+ allocation));
+ goto unlock_and_exit;
+ }
+
+ /* Fill in the instance data */
+
+ allocation->size = (u32)size;
+ allocation->alloc_type = alloc_type;
+ allocation->component = component;
+ allocation->line = line;
+
+ ACPI_STRNCPY(allocation->module, module, ACPI_MAX_MODULE_NAME);
+ allocation->module[ACPI_MAX_MODULE_NAME - 1] = 0;
+
+ if (!element) {
+
+ /* Insert at list head */
+
+ if (mem_list->list_head) {
+ ((struct acpi_debug_mem_block *)(mem_list->list_head))->
+ previous = allocation;
+ }
+
+ allocation->next = mem_list->list_head;
+ allocation->previous = NULL;
+
+ mem_list->list_head = allocation;
+ } else {
+ /* Insert after element */
+
+ allocation->next = element->next;
+ allocation->previous = element;
+
+ if (element->next) {
+ (element->next)->previous = allocation;
+ }
+
+ element->next = allocation;
+ }
+
+ unlock_and_exit:
+ status = acpi_ut_release_mutex(ACPI_MTX_MEMORY);
+ return_ACPI_STATUS(status);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_remove_allocation
+ *
+ * PARAMETERS: allocation - Address of allocated memory
+ * component - Component type of caller
+ * module - Source file name of caller
+ * line - Line number of caller
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Deletes an element from the global allocation tracking list.
+ *
+ ******************************************************************************/
+
+static acpi_status
+acpi_ut_remove_allocation(struct acpi_debug_mem_block *allocation,
+ u32 component, const char *module, u32 line)
+{
+ struct acpi_memory_list *mem_list;
+ acpi_status status;
+
+ ACPI_FUNCTION_TRACE(ut_remove_allocation);
+
+ if (acpi_gbl_disable_mem_tracking) {
+ return_ACPI_STATUS(AE_OK);
+ }
+
+ mem_list = acpi_gbl_global_list;
+ if (NULL == mem_list->list_head) {
+
+ /* No allocations! */
+
+ ACPI_ERROR((module, line,
+ "Empty allocation list, nothing to free!"));
+
+ return_ACPI_STATUS(AE_OK);
+ }
+
+ status = acpi_ut_acquire_mutex(ACPI_MTX_MEMORY);
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+
+ /* Unlink */
+
+ if (allocation->previous) {
+ (allocation->previous)->next = allocation->next;
+ } else {
+ mem_list->list_head = allocation->next;
+ }
+
+ if (allocation->next) {
+ (allocation->next)->previous = allocation->previous;
+ }
+
+ /* Mark the segment as deleted */
+
+ ACPI_MEMSET(&allocation->user_space, 0xEA, allocation->size);
+
+ ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS, "Freeing size 0%X\n",
+ allocation->size));
+
+ status = acpi_ut_release_mutex(ACPI_MTX_MEMORY);
+ return_ACPI_STATUS(status);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_dump_allocation_info
+ *
+ * PARAMETERS: None
+ *
+ * RETURN: None
+ *
+ * DESCRIPTION: Print some info about the outstanding allocations.
+ *
+ ******************************************************************************/
+
+void acpi_ut_dump_allocation_info(void)
+{
+/*
+ struct acpi_memory_list *mem_list;
+*/
+
+ ACPI_FUNCTION_TRACE(ut_dump_allocation_info);
+
+/*
+ ACPI_DEBUG_PRINT (TRACE_ALLOCATIONS | TRACE_TABLES,
+ ("%30s: %4d (%3d Kb)\n", "Current allocations",
+ mem_list->current_count,
+ ROUND_UP_TO_1K (mem_list->current_size)));
+
+ ACPI_DEBUG_PRINT (TRACE_ALLOCATIONS | TRACE_TABLES,
+ ("%30s: %4d (%3d Kb)\n", "Max concurrent allocations",
+ mem_list->max_concurrent_count,
+ ROUND_UP_TO_1K (mem_list->max_concurrent_size)));
+
+ ACPI_DEBUG_PRINT (TRACE_ALLOCATIONS | TRACE_TABLES,
+ ("%30s: %4d (%3d Kb)\n", "Total (all) internal objects",
+ running_object_count,
+ ROUND_UP_TO_1K (running_object_size)));
+
+ ACPI_DEBUG_PRINT (TRACE_ALLOCATIONS | TRACE_TABLES,
+ ("%30s: %4d (%3d Kb)\n", "Total (all) allocations",
+ running_alloc_count,
+ ROUND_UP_TO_1K (running_alloc_size)));
+
+ ACPI_DEBUG_PRINT (TRACE_ALLOCATIONS | TRACE_TABLES,
+ ("%30s: %4d (%3d Kb)\n", "Current Nodes",
+ acpi_gbl_current_node_count,
+ ROUND_UP_TO_1K (acpi_gbl_current_node_size)));
+
+ ACPI_DEBUG_PRINT (TRACE_ALLOCATIONS | TRACE_TABLES,
+ ("%30s: %4d (%3d Kb)\n", "Max Nodes",
+ acpi_gbl_max_concurrent_node_count,
+ ROUND_UP_TO_1K ((acpi_gbl_max_concurrent_node_count *
+ sizeof (struct acpi_namespace_node)))));
+*/
+ return_VOID;
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_dump_allocations
+ *
+ * PARAMETERS: component - Component(s) to dump info for.
+ * module - Module to dump info for. NULL means all.
+ *
+ * RETURN: None
+ *
+ * DESCRIPTION: Print a list of all outstanding allocations.
+ *
+ ******************************************************************************/
+
+void acpi_ut_dump_allocations(u32 component, const char *module)
+{
+ struct acpi_debug_mem_block *element;
+ union acpi_descriptor *descriptor;
+ u32 num_outstanding = 0;
+ u8 descriptor_type;
+
+ ACPI_FUNCTION_TRACE(ut_dump_allocations);
+
+ if (acpi_gbl_disable_mem_tracking) {
+ return_VOID;
+ }
+
+ /*
+ * Walk the allocation list.
+ */
+ if (ACPI_FAILURE(acpi_ut_acquire_mutex(ACPI_MTX_MEMORY))) {
+ return_VOID;
+ }
+
+ element = acpi_gbl_global_list->list_head;
+ while (element) {
+ if ((element->component & component) &&
+ ((module == NULL)
+ || (0 == ACPI_STRCMP(module, element->module)))) {
+ descriptor =
+ ACPI_CAST_PTR(union acpi_descriptor,
+ &element->user_space);
+
+ if (element->size <
+ sizeof(struct acpi_common_descriptor)) {
+ acpi_os_printf("%p Length 0x%04X %9.9s-%u "
+ "[Not a Descriptor - too small]\n",
+ descriptor, element->size,
+ element->module, element->line);
+ } else {
+ /* Ignore allocated objects that are in a cache */
+
+ if (ACPI_GET_DESCRIPTOR_TYPE(descriptor) !=
+ ACPI_DESC_TYPE_CACHED) {
+ acpi_os_printf
+ ("%p Length 0x%04X %9.9s-%u [%s] ",
+ descriptor, element->size,
+ element->module, element->line,
+ acpi_ut_get_descriptor_name
+ (descriptor));
+
+ /* Validate the descriptor type using Type field and length */
+
+ descriptor_type = 0; /* Not a valid descriptor type */
+
+ switch (ACPI_GET_DESCRIPTOR_TYPE
+ (descriptor)) {
+ case ACPI_DESC_TYPE_OPERAND:
+ if (element->size ==
+ sizeof(union
+ acpi_operand_object))
+ {
+ descriptor_type =
+ ACPI_DESC_TYPE_OPERAND;
+ }
+ break;
+
+ case ACPI_DESC_TYPE_PARSER:
+ if (element->size ==
+ sizeof(union
+ acpi_parse_object)) {
+ descriptor_type =
+ ACPI_DESC_TYPE_PARSER;
+ }
+ break;
+
+ case ACPI_DESC_TYPE_NAMED:
+ if (element->size ==
+ sizeof(struct
+ acpi_namespace_node))
+ {
+ descriptor_type =
+ ACPI_DESC_TYPE_NAMED;
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Display additional info for the major descriptor types */
+
+ switch (descriptor_type) {
+ case ACPI_DESC_TYPE_OPERAND:
+ acpi_os_printf
+ ("%12.12s RefCount 0x%04X\n",
+ acpi_ut_get_type_name
+ (descriptor->object.common.
+ type),
+ descriptor->object.common.
+ reference_count);
+ break;
+
+ case ACPI_DESC_TYPE_PARSER:
+ acpi_os_printf
+ ("AmlOpcode 0x%04hX\n",
+ descriptor->op.asl.
+ aml_opcode);
+ break;
+
+ case ACPI_DESC_TYPE_NAMED:
+ acpi_os_printf("%4.4s\n",
+ acpi_ut_get_node_name
+ (&descriptor->
+ node));
+ break;
+
+ default:
+ acpi_os_printf("\n");
+ break;
+ }
+ }
+ }
+
+ num_outstanding++;
+ }
+
+ element = element->next;
+ }
+
+ (void)acpi_ut_release_mutex(ACPI_MTX_MEMORY);
+
+ /* Print summary */
+
+ if (!num_outstanding) {
+ ACPI_INFO((AE_INFO, "No outstanding allocations"));
+ } else {
+ ACPI_ERROR((AE_INFO, "%u(0x%X) Outstanding allocations",
+ num_outstanding, num_outstanding));
+ }
+
+ return_VOID;
+}
+
+#endif /* ACPI_DBG_TRACK_ALLOCATIONS */
diff --git a/drivers/acpi/acpica/utxface.c b/drivers/acpi/acpica/utxface.c
index b09632b..390db0c 100644
--- a/drivers/acpi/acpica/utxface.c
+++ b/drivers/acpi/acpica/utxface.c
@@ -147,7 +147,7 @@
* RETURN: status - the status of the call
*
* DESCRIPTION: This function is called to get information about the current
- * state of the ACPI subsystem. It will return system information
+ * state of the ACPI subsystem. It will return system information
* in the out_buffer.
*
* If the function fails an appropriate status will be returned
@@ -238,7 +238,7 @@
}
acpi_gbl_init_handler = handler;
- return AE_OK;
+ return (AE_OK);
}
ACPI_EXPORT_SYMBOL(acpi_install_initialization_handler)
@@ -263,6 +263,7 @@
(void)acpi_os_purge_cache(acpi_gbl_operand_cache);
(void)acpi_os_purge_cache(acpi_gbl_ps_node_cache);
(void)acpi_os_purge_cache(acpi_gbl_ps_node_ext_cache);
+
return_ACPI_STATUS(AE_OK);
}
diff --git a/drivers/acpi/acpica/utxferror.c b/drivers/acpi/acpica/utxferror.c
index 6d63cc3..d4d3826 100644
--- a/drivers/acpi/acpica/utxferror.c
+++ b/drivers/acpi/acpica/utxferror.c
@@ -408,7 +408,7 @@
ACPI_MOVE_32_TO_32(&bad_name,
ACPI_CAST_PTR(u32, internal_name));
- acpi_os_printf("[0x%4.4X] (NON-ASCII)", bad_name);
+ acpi_os_printf("[0x%.8X] (NON-ASCII)", bad_name);
} else {
/* Convert path to external format */
diff --git a/drivers/acpi/apei/ghes.c b/drivers/acpi/apei/ghes.c
index 1599566..7ae2750 100644
--- a/drivers/acpi/apei/ghes.c
+++ b/drivers/acpi/apei/ghes.c
@@ -901,7 +901,7 @@
return prealloc_size;
}
-static int __devinit ghes_probe(struct platform_device *ghes_dev)
+static int ghes_probe(struct platform_device *ghes_dev)
{
struct acpi_hest_generic *generic;
struct ghes *ghes = NULL;
@@ -994,7 +994,7 @@
return rc;
}
-static int __devexit ghes_remove(struct platform_device *ghes_dev)
+static int ghes_remove(struct platform_device *ghes_dev)
{
struct ghes *ghes;
struct acpi_hest_generic *generic;
diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c
index 45e3e17..7efaeaa 100644
--- a/drivers/acpi/battery.c
+++ b/drivers/acpi/battery.c
@@ -34,6 +34,7 @@
#include <linux/dmi.h>
#include <linux/slab.h>
#include <linux/suspend.h>
+#include <asm/unaligned.h>
#ifdef CONFIG_ACPI_PROCFS_POWER
#include <linux/proc_fs.h>
@@ -95,6 +96,18 @@
ACPI_BATTERY_ALARM_PRESENT,
ACPI_BATTERY_XINFO_PRESENT,
ACPI_BATTERY_QUIRK_PERCENTAGE_CAPACITY,
+ /* On Lenovo Thinkpad models from 2010 and 2011, the power unit
+ switches between mWh and mAh depending on whether the system
+ is running on battery or not. When mAh is the unit, most
+ reported values are incorrect and need to be adjusted by
+ 10000/design_voltage. Verified on x201, t410, t410s, and x220.
+ Pre-2010 and 2012 models appear to always report in mWh and
+ are thus unaffected (tested with t42, t61, t500, x200, x300,
+ and x230). Also, in mid-2012 Lenovo issued a BIOS update for
+ the 2011 models that fixes the issue (tested on x220 with a
+ post-1.29 BIOS), but as of Nov. 2012, no such update is
+ available for the 2010 models. */
+ ACPI_BATTERY_QUIRK_THINKPAD_MAH,
};
struct acpi_battery {
@@ -438,6 +451,21 @@
kfree(buffer.pointer);
if (test_bit(ACPI_BATTERY_QUIRK_PERCENTAGE_CAPACITY, &battery->flags))
battery->full_charge_capacity = battery->design_capacity;
+ if (test_bit(ACPI_BATTERY_QUIRK_THINKPAD_MAH, &battery->flags) &&
+ battery->power_unit && battery->design_voltage) {
+ battery->design_capacity = battery->design_capacity *
+ 10000 / battery->design_voltage;
+ battery->full_charge_capacity = battery->full_charge_capacity *
+ 10000 / battery->design_voltage;
+ battery->design_capacity_warning =
+ battery->design_capacity_warning *
+ 10000 / battery->design_voltage;
+ /* Curiously, design_capacity_low, unlike the rest of them,
+ is correct. */
+ /* capacity_granularity_* equal 1 on the systems tested, so
+ it's impossible to tell if they would need an adjustment
+ or not if their values were higher. */
+ }
return result;
}
@@ -486,6 +514,11 @@
&& battery->capacity_now >= 0 && battery->capacity_now <= 100)
battery->capacity_now = (battery->capacity_now *
battery->full_charge_capacity) / 100;
+ if (test_bit(ACPI_BATTERY_QUIRK_THINKPAD_MAH, &battery->flags) &&
+ battery->power_unit && battery->design_voltage) {
+ battery->capacity_now = battery->capacity_now *
+ 10000 / battery->design_voltage;
+ }
return result;
}
@@ -595,6 +628,24 @@
mutex_unlock(&battery->sysfs_lock);
}
+static void find_battery(const struct dmi_header *dm, void *private)
+{
+ struct acpi_battery *battery = (struct acpi_battery *)private;
+ /* Note: the hardcoded offsets below have been extracted from
+ the source code of dmidecode. */
+ if (dm->type == DMI_ENTRY_PORTABLE_BATTERY && dm->length >= 8) {
+ const u8 *dmi_data = (const u8 *)(dm + 1);
+ int dmi_capacity = get_unaligned((const u16 *)(dmi_data + 6));
+ if (dm->length >= 18)
+ dmi_capacity *= dmi_data[17];
+ if (battery->design_capacity * battery->design_voltage / 1000
+ != dmi_capacity &&
+ battery->design_capacity * 10 == dmi_capacity)
+ set_bit(ACPI_BATTERY_QUIRK_THINKPAD_MAH,
+ &battery->flags);
+ }
+}
+
/*
* According to the ACPI spec, some kinds of primary batteries can
* report percentage battery remaining capacity directly to OS.
@@ -620,6 +671,32 @@
battery->capacity_now = (battery->capacity_now *
battery->full_charge_capacity) / 100;
}
+
+ if (test_bit(ACPI_BATTERY_QUIRK_THINKPAD_MAH, &battery->flags))
+ return ;
+
+ if (battery->power_unit && dmi_name_in_vendors("LENOVO")) {
+ const char *s;
+ s = dmi_get_system_info(DMI_PRODUCT_VERSION);
+ if (s && !strnicmp(s, "ThinkPad", 8)) {
+ dmi_walk(find_battery, battery);
+ if (test_bit(ACPI_BATTERY_QUIRK_THINKPAD_MAH,
+ &battery->flags) &&
+ battery->design_voltage) {
+ battery->design_capacity =
+ battery->design_capacity *
+ 10000 / battery->design_voltage;
+ battery->full_charge_capacity =
+ battery->full_charge_capacity *
+ 10000 / battery->design_voltage;
+ battery->design_capacity_warning =
+ battery->design_capacity_warning *
+ 10000 / battery->design_voltage;
+ battery->capacity_now = battery->capacity_now *
+ 10000 / battery->design_voltage;
+ }
+ }
+ }
}
static int acpi_battery_update(struct acpi_battery *battery)
diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c
index d59175e..1f0d457 100644
--- a/drivers/acpi/bus.c
+++ b/drivers/acpi/bus.c
@@ -257,7 +257,15 @@
}
-static int __acpi_bus_set_power(struct acpi_device *device, int state)
+/**
+ * acpi_device_set_power - Set power state of an ACPI device.
+ * @device: Device to set the power state of.
+ * @state: New power state to set.
+ *
+ * Callers must ensure that the device is power manageable before using this
+ * function.
+ */
+int acpi_device_set_power(struct acpi_device *device, int state)
{
int result = 0;
acpi_status status = AE_OK;
@@ -298,6 +306,12 @@
* a lower-powered state.
*/
if (state < device->power.state) {
+ if (device->power.state >= ACPI_STATE_D3_HOT &&
+ state != ACPI_STATE_D0) {
+ printk(KERN_WARNING PREFIX
+ "Cannot transition to non-D0 state from D3\n");
+ return -ENODEV;
+ }
if (device->power.flags.power_resources) {
result = acpi_power_transition(device, state);
if (result)
@@ -341,6 +355,7 @@
return result;
}
+EXPORT_SYMBOL(acpi_device_set_power);
int acpi_bus_set_power(acpi_handle handle, int state)
@@ -359,7 +374,7 @@
return -ENODEV;
}
- return __acpi_bus_set_power(device, state);
+ return acpi_device_set_power(device, state);
}
EXPORT_SYMBOL(acpi_bus_set_power);
@@ -402,7 +417,7 @@
if (result)
return result;
- result = __acpi_bus_set_power(device, state);
+ result = acpi_device_set_power(device, state);
if (!result && state_p)
*state_p = state;
diff --git a/drivers/acpi/container.c b/drivers/acpi/container.c
index 1f9f7d7..811910b 100644
--- a/drivers/acpi/container.c
+++ b/drivers/acpi/container.c
@@ -92,17 +92,24 @@
return ((sta & ACPI_STA_DEVICE_PRESENT) == ACPI_STA_DEVICE_PRESENT);
}
+static bool is_container_device(const char *hid)
+{
+ const struct acpi_device_id *container_id;
+
+ for (container_id = container_device_ids;
+ container_id->id[0]; container_id++) {
+ if (!strcmp((char *)container_id->id, hid))
+ return true;
+ }
+
+ return false;
+}
+
/*******************************************************************/
static int acpi_container_add(struct acpi_device *device)
{
struct acpi_container *container;
-
- if (!device) {
- printk(KERN_ERR PREFIX "device is NULL\n");
- return -EINVAL;
- }
-
container = kzalloc(sizeof(struct acpi_container), GFP_KERNEL);
if (!container)
return -ENOMEM;
@@ -164,7 +171,7 @@
case ACPI_NOTIFY_BUS_CHECK:
/* Fall through */
case ACPI_NOTIFY_DEVICE_CHECK:
- printk(KERN_WARNING "Container driver received %s event\n",
+ pr_debug("Container driver received %s event\n",
(type == ACPI_NOTIFY_BUS_CHECK) ?
"ACPI_NOTIFY_BUS_CHECK" : "ACPI_NOTIFY_DEVICE_CHECK");
@@ -185,7 +192,7 @@
result = container_device_add(&device, handle);
if (result) {
- printk(KERN_WARNING "Failed to add container\n");
+ acpi_handle_warn(handle, "Failed to add container\n");
break;
}
@@ -232,10 +239,8 @@
goto end;
}
- if (strcmp(hid, "ACPI0004") && strcmp(hid, "PNP0A05") &&
- strcmp(hid, "PNP0A06")) {
+ if (!is_container_device(hid))
goto end;
- }
switch (*action) {
case INSTALL_NOTIFY_HANDLER:
diff --git a/drivers/acpi/device_pm.c b/drivers/acpi/device_pm.c
new file mode 100644
index 0000000..f09dc98
--- /dev/null
+++ b/drivers/acpi/device_pm.c
@@ -0,0 +1,668 @@
+/*
+ * drivers/acpi/device_pm.c - ACPI device power management routines.
+ *
+ * Copyright (C) 2012, Intel Corp.
+ * Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ */
+
+#include <linux/device.h>
+#include <linux/export.h>
+#include <linux/mutex.h>
+#include <linux/pm_qos.h>
+#include <linux/pm_runtime.h>
+
+#include <acpi/acpi.h>
+#include <acpi/acpi_bus.h>
+
+static DEFINE_MUTEX(acpi_pm_notifier_lock);
+
+/**
+ * acpi_add_pm_notifier - Register PM notifier for given ACPI device.
+ * @adev: ACPI device to add the notifier for.
+ * @context: Context information to pass to the notifier routine.
+ *
+ * NOTE: @adev need not be a run-wake or wakeup device to be a valid source of
+ * PM wakeup events. For example, wakeup events may be generated for bridges
+ * if one of the devices below the bridge is signaling wakeup, even if the
+ * bridge itself doesn't have a wakeup GPE associated with it.
+ */
+acpi_status acpi_add_pm_notifier(struct acpi_device *adev,
+ acpi_notify_handler handler, void *context)
+{
+ acpi_status status = AE_ALREADY_EXISTS;
+
+ mutex_lock(&acpi_pm_notifier_lock);
+
+ if (adev->wakeup.flags.notifier_present)
+ goto out;
+
+ status = acpi_install_notify_handler(adev->handle,
+ ACPI_SYSTEM_NOTIFY,
+ handler, context);
+ if (ACPI_FAILURE(status))
+ goto out;
+
+ adev->wakeup.flags.notifier_present = true;
+
+ out:
+ mutex_unlock(&acpi_pm_notifier_lock);
+ return status;
+}
+
+/**
+ * acpi_remove_pm_notifier - Unregister PM notifier from given ACPI device.
+ * @adev: ACPI device to remove the notifier from.
+ */
+acpi_status acpi_remove_pm_notifier(struct acpi_device *adev,
+ acpi_notify_handler handler)
+{
+ acpi_status status = AE_BAD_PARAMETER;
+
+ mutex_lock(&acpi_pm_notifier_lock);
+
+ if (!adev->wakeup.flags.notifier_present)
+ goto out;
+
+ status = acpi_remove_notify_handler(adev->handle,
+ ACPI_SYSTEM_NOTIFY,
+ handler);
+ if (ACPI_FAILURE(status))
+ goto out;
+
+ adev->wakeup.flags.notifier_present = false;
+
+ out:
+ mutex_unlock(&acpi_pm_notifier_lock);
+ return status;
+}
+
+/**
+ * acpi_device_power_state - Get preferred power state of ACPI device.
+ * @dev: Device whose preferred target power state to return.
+ * @adev: ACPI device node corresponding to @dev.
+ * @target_state: System state to match the resultant device state.
+ * @d_max_in: Deepest low-power state to take into consideration.
+ * @d_min_p: Location to store the upper limit of the allowed states range.
+ * Return value: Preferred power state of the device on success, -ENODEV
+ * (if there's no 'struct acpi_device' for @dev) or -EINVAL on failure
+ *
+ * Find the lowest power (highest number) ACPI device power state that the
+ * device can be in while the system is in the state represented by
+ * @target_state. If @d_min_p is set, the highest power (lowest number) device
+ * power state that @dev can be in for the given system sleep state is stored
+ * at the location pointed to by it.
+ *
+ * Callers must ensure that @dev and @adev are valid pointers and that @adev
+ * actually corresponds to @dev before using this function.
+ */
+int acpi_device_power_state(struct device *dev, struct acpi_device *adev,
+ u32 target_state, int d_max_in, int *d_min_p)
+{
+ char acpi_method[] = "_SxD";
+ unsigned long long d_min, d_max;
+ bool wakeup = false;
+
+ if (d_max_in < ACPI_STATE_D0 || d_max_in > ACPI_STATE_D3)
+ return -EINVAL;
+
+ if (d_max_in > ACPI_STATE_D3_HOT) {
+ enum pm_qos_flags_status stat;
+
+ stat = dev_pm_qos_flags(dev, PM_QOS_FLAG_NO_POWER_OFF);
+ if (stat == PM_QOS_FLAGS_ALL)
+ d_max_in = ACPI_STATE_D3_HOT;
+ }
+
+ acpi_method[2] = '0' + target_state;
+ /*
+ * If the sleep state is S0, the lowest limit from ACPI is D3,
+ * but if the device has _S0W, we will use the value from _S0W
+ * as the lowest limit from ACPI. Finally, we will constrain
+ * the lowest limit with the specified one.
+ */
+ d_min = ACPI_STATE_D0;
+ d_max = ACPI_STATE_D3;
+
+ /*
+ * If present, _SxD methods return the minimum D-state (highest power
+ * state) we can use for the corresponding S-states. Otherwise, the
+ * minimum D-state is D0 (ACPI 3.x).
+ *
+ * NOTE: We rely on acpi_evaluate_integer() not clobbering the integer
+ * provided -- that's our fault recovery, we ignore retval.
+ */
+ if (target_state > ACPI_STATE_S0) {
+ acpi_evaluate_integer(adev->handle, acpi_method, NULL, &d_min);
+ wakeup = device_may_wakeup(dev) && adev->wakeup.flags.valid
+ && adev->wakeup.sleep_state >= target_state;
+ } else if (dev_pm_qos_flags(dev, PM_QOS_FLAG_REMOTE_WAKEUP) !=
+ PM_QOS_FLAGS_NONE) {
+ wakeup = adev->wakeup.flags.valid;
+ }
+
+ /*
+ * If _PRW says we can wake up the system from the target sleep state,
+ * the D-state returned by _SxD is sufficient for that (we assume a
+ * wakeup-aware driver if wake is set). Still, if _SxW exists
+ * (ACPI 3.x), it should return the maximum (lowest power) D-state that
+ * can wake the system. _S0W may be valid, too.
+ */
+ if (wakeup) {
+ acpi_status status;
+
+ acpi_method[3] = 'W';
+ status = acpi_evaluate_integer(adev->handle, acpi_method, NULL,
+ &d_max);
+ if (ACPI_FAILURE(status)) {
+ if (target_state != ACPI_STATE_S0 ||
+ status != AE_NOT_FOUND)
+ d_max = d_min;
+ } else if (d_max < d_min) {
+ /* Warn the user of the broken DSDT */
+ printk(KERN_WARNING "ACPI: Wrong value from %s\n",
+ acpi_method);
+ /* Sanitize it */
+ d_min = d_max;
+ }
+ }
+
+ if (d_max_in < d_min)
+ return -EINVAL;
+ if (d_min_p)
+ *d_min_p = d_min;
+ /* constrain d_max with specified lowest limit (max number) */
+ if (d_max > d_max_in) {
+ for (d_max = d_max_in; d_max > d_min; d_max--) {
+ if (adev->power.states[d_max].flags.valid)
+ break;
+ }
+ }
+ return d_max;
+}
+EXPORT_SYMBOL_GPL(acpi_device_power_state);
+
+/**
+ * acpi_pm_device_sleep_state - Get preferred power state of ACPI device.
+ * @dev: Device whose preferred target power state to return.
+ * @d_min_p: Location to store the upper limit of the allowed states range.
+ * @d_max_in: Deepest low-power state to take into consideration.
+ * Return value: Preferred power state of the device on success, -ENODEV
+ * (if there's no 'struct acpi_device' for @dev) or -EINVAL on failure
+ *
+ * The caller must ensure that @dev is valid before using this function.
+ */
+int acpi_pm_device_sleep_state(struct device *dev, int *d_min_p, int d_max_in)
+{
+ acpi_handle handle = DEVICE_ACPI_HANDLE(dev);
+ struct acpi_device *adev;
+
+ if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &adev))) {
+ dev_dbg(dev, "ACPI handle without context in %s!\n", __func__);
+ return -ENODEV;
+ }
+
+ return acpi_device_power_state(dev, adev, acpi_target_system_state(),
+ d_max_in, d_min_p);
+}
+EXPORT_SYMBOL(acpi_pm_device_sleep_state);
+
+#ifdef CONFIG_PM_RUNTIME
+/**
+ * acpi_wakeup_device - Wakeup notification handler for ACPI devices.
+ * @handle: ACPI handle of the device the notification is for.
+ * @event: Type of the signaled event.
+ * @context: Device corresponding to @handle.
+ */
+static void acpi_wakeup_device(acpi_handle handle, u32 event, void *context)
+{
+ struct device *dev = context;
+
+ if (event == ACPI_NOTIFY_DEVICE_WAKE && dev) {
+ pm_wakeup_event(dev, 0);
+ pm_runtime_resume(dev);
+ }
+}
+
+/**
+ * __acpi_device_run_wake - Enable/disable runtime remote wakeup for device.
+ * @adev: ACPI device to enable/disable the remote wakeup for.
+ * @enable: Whether to enable or disable the wakeup functionality.
+ *
+ * Enable/disable the GPE associated with @adev so that it can generate
+ * wakeup signals for the device in response to external (remote) events and
+ * enable/disable device wakeup power.
+ *
+ * Callers must ensure that @adev is a valid ACPI device node before executing
+ * this function.
+ */
+int __acpi_device_run_wake(struct acpi_device *adev, bool enable)
+{
+ struct acpi_device_wakeup *wakeup = &adev->wakeup;
+
+ if (enable) {
+ acpi_status res;
+ int error;
+
+ error = acpi_enable_wakeup_device_power(adev, ACPI_STATE_S0);
+ if (error)
+ return error;
+
+ res = acpi_enable_gpe(wakeup->gpe_device, wakeup->gpe_number);
+ if (ACPI_FAILURE(res)) {
+ acpi_disable_wakeup_device_power(adev);
+ return -EIO;
+ }
+ } else {
+ acpi_disable_gpe(wakeup->gpe_device, wakeup->gpe_number);
+ acpi_disable_wakeup_device_power(adev);
+ }
+ return 0;
+}
+
+/**
+ * acpi_pm_device_run_wake - Enable/disable remote wakeup for given device.
+ * @dev: Device to enable/disable the platform to wake up.
+ * @enable: Whether to enable or disable the wakeup functionality.
+ */
+int acpi_pm_device_run_wake(struct device *phys_dev, bool enable)
+{
+ struct acpi_device *adev;
+ acpi_handle handle;
+
+ if (!device_run_wake(phys_dev))
+ return -EINVAL;
+
+ handle = DEVICE_ACPI_HANDLE(phys_dev);
+ if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &adev))) {
+ dev_dbg(phys_dev, "ACPI handle without context in %s!\n",
+ __func__);
+ return -ENODEV;
+ }
+
+ return __acpi_device_run_wake(adev, enable);
+}
+EXPORT_SYMBOL(acpi_pm_device_run_wake);
+#else
+static inline void acpi_wakeup_device(acpi_handle handle, u32 event,
+ void *context) {}
+#endif /* CONFIG_PM_RUNTIME */
+
+ #ifdef CONFIG_PM_SLEEP
+/**
+ * __acpi_device_sleep_wake - Enable or disable device to wake up the system.
+ * @dev: Device to enable/desible to wake up the system.
+ * @target_state: System state the device is supposed to wake up from.
+ * @enable: Whether to enable or disable @dev to wake up the system.
+ */
+int __acpi_device_sleep_wake(struct acpi_device *adev, u32 target_state,
+ bool enable)
+{
+ return enable ?
+ acpi_enable_wakeup_device_power(adev, target_state) :
+ acpi_disable_wakeup_device_power(adev);
+}
+
+/**
+ * acpi_pm_device_sleep_wake - Enable or disable device to wake up the system.
+ * @dev: Device to enable/desible to wake up the system from sleep states.
+ * @enable: Whether to enable or disable @dev to wake up the system.
+ */
+int acpi_pm_device_sleep_wake(struct device *dev, bool enable)
+{
+ acpi_handle handle;
+ struct acpi_device *adev;
+ int error;
+
+ if (!device_can_wakeup(dev))
+ return -EINVAL;
+
+ handle = DEVICE_ACPI_HANDLE(dev);
+ if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &adev))) {
+ dev_dbg(dev, "ACPI handle without context in %s!\n", __func__);
+ return -ENODEV;
+ }
+
+ error = __acpi_device_sleep_wake(adev, acpi_target_system_state(),
+ enable);
+ if (!error)
+ dev_info(dev, "System wakeup %s by ACPI\n",
+ enable ? "enabled" : "disabled");
+
+ return error;
+}
+#endif /* CONFIG_PM_SLEEP */
+
+/**
+ * acpi_dev_pm_get_node - Get ACPI device node for the given physical device.
+ * @dev: Device to get the ACPI node for.
+ */
+static struct acpi_device *acpi_dev_pm_get_node(struct device *dev)
+{
+ acpi_handle handle = DEVICE_ACPI_HANDLE(dev);
+ struct acpi_device *adev;
+
+ return handle && ACPI_SUCCESS(acpi_bus_get_device(handle, &adev)) ?
+ adev : NULL;
+}
+
+/**
+ * acpi_dev_pm_low_power - Put ACPI device into a low-power state.
+ * @dev: Device to put into a low-power state.
+ * @adev: ACPI device node corresponding to @dev.
+ * @system_state: System state to choose the device state for.
+ */
+static int acpi_dev_pm_low_power(struct device *dev, struct acpi_device *adev,
+ u32 system_state)
+{
+ int power_state;
+
+ if (!acpi_device_power_manageable(adev))
+ return 0;
+
+ power_state = acpi_device_power_state(dev, adev, system_state,
+ ACPI_STATE_D3, NULL);
+ if (power_state < ACPI_STATE_D0 || power_state > ACPI_STATE_D3)
+ return -EIO;
+
+ return acpi_device_set_power(adev, power_state);
+}
+
+/**
+ * acpi_dev_pm_full_power - Put ACPI device into the full-power state.
+ * @adev: ACPI device node to put into the full-power state.
+ */
+static int acpi_dev_pm_full_power(struct acpi_device *adev)
+{
+ return acpi_device_power_manageable(adev) ?
+ acpi_device_set_power(adev, ACPI_STATE_D0) : 0;
+}
+
+#ifdef CONFIG_PM_RUNTIME
+/**
+ * acpi_dev_runtime_suspend - Put device into a low-power state using ACPI.
+ * @dev: Device to put into a low-power state.
+ *
+ * Put the given device into a runtime low-power state using the standard ACPI
+ * mechanism. Set up remote wakeup if desired, choose the state to put the
+ * device into (this checks if remote wakeup is expected to work too), and set
+ * the power state of the device.
+ */
+int acpi_dev_runtime_suspend(struct device *dev)
+{
+ struct acpi_device *adev = acpi_dev_pm_get_node(dev);
+ bool remote_wakeup;
+ int error;
+
+ if (!adev)
+ return 0;
+
+ remote_wakeup = dev_pm_qos_flags(dev, PM_QOS_FLAG_REMOTE_WAKEUP) >
+ PM_QOS_FLAGS_NONE;
+ error = __acpi_device_run_wake(adev, remote_wakeup);
+ if (remote_wakeup && error)
+ return -EAGAIN;
+
+ error = acpi_dev_pm_low_power(dev, adev, ACPI_STATE_S0);
+ if (error)
+ __acpi_device_run_wake(adev, false);
+
+ return error;
+}
+EXPORT_SYMBOL_GPL(acpi_dev_runtime_suspend);
+
+/**
+ * acpi_dev_runtime_resume - Put device into the full-power state using ACPI.
+ * @dev: Device to put into the full-power state.
+ *
+ * Put the given device into the full-power state using the standard ACPI
+ * mechanism at run time. Set the power state of the device to ACPI D0 and
+ * disable remote wakeup.
+ */
+int acpi_dev_runtime_resume(struct device *dev)
+{
+ struct acpi_device *adev = acpi_dev_pm_get_node(dev);
+ int error;
+
+ if (!adev)
+ return 0;
+
+ error = acpi_dev_pm_full_power(adev);
+ __acpi_device_run_wake(adev, false);
+ return error;
+}
+EXPORT_SYMBOL_GPL(acpi_dev_runtime_resume);
+
+/**
+ * acpi_subsys_runtime_suspend - Suspend device using ACPI.
+ * @dev: Device to suspend.
+ *
+ * Carry out the generic runtime suspend procedure for @dev and use ACPI to put
+ * it into a runtime low-power state.
+ */
+int acpi_subsys_runtime_suspend(struct device *dev)
+{
+ int ret = pm_generic_runtime_suspend(dev);
+ return ret ? ret : acpi_dev_runtime_suspend(dev);
+}
+EXPORT_SYMBOL_GPL(acpi_subsys_runtime_suspend);
+
+/**
+ * acpi_subsys_runtime_resume - Resume device using ACPI.
+ * @dev: Device to Resume.
+ *
+ * Use ACPI to put the given device into the full-power state and carry out the
+ * generic runtime resume procedure for it.
+ */
+int acpi_subsys_runtime_resume(struct device *dev)
+{
+ int ret = acpi_dev_runtime_resume(dev);
+ return ret ? ret : pm_generic_runtime_resume(dev);
+}
+EXPORT_SYMBOL_GPL(acpi_subsys_runtime_resume);
+#endif /* CONFIG_PM_RUNTIME */
+
+#ifdef CONFIG_PM_SLEEP
+/**
+ * acpi_dev_suspend_late - Put device into a low-power state using ACPI.
+ * @dev: Device to put into a low-power state.
+ *
+ * Put the given device into a low-power state during system transition to a
+ * sleep state using the standard ACPI mechanism. Set up system wakeup if
+ * desired, choose the state to put the device into (this checks if system
+ * wakeup is expected to work too), and set the power state of the device.
+ */
+int acpi_dev_suspend_late(struct device *dev)
+{
+ struct acpi_device *adev = acpi_dev_pm_get_node(dev);
+ u32 target_state;
+ bool wakeup;
+ int error;
+
+ if (!adev)
+ return 0;
+
+ target_state = acpi_target_system_state();
+ wakeup = device_may_wakeup(dev);
+ error = __acpi_device_sleep_wake(adev, target_state, wakeup);
+ if (wakeup && error)
+ return error;
+
+ error = acpi_dev_pm_low_power(dev, adev, target_state);
+ if (error)
+ __acpi_device_sleep_wake(adev, ACPI_STATE_UNKNOWN, false);
+
+ return error;
+}
+EXPORT_SYMBOL_GPL(acpi_dev_suspend_late);
+
+/**
+ * acpi_dev_resume_early - Put device into the full-power state using ACPI.
+ * @dev: Device to put into the full-power state.
+ *
+ * Put the given device into the full-power state using the standard ACPI
+ * mechanism during system transition to the working state. Set the power
+ * state of the device to ACPI D0 and disable remote wakeup.
+ */
+int acpi_dev_resume_early(struct device *dev)
+{
+ struct acpi_device *adev = acpi_dev_pm_get_node(dev);
+ int error;
+
+ if (!adev)
+ return 0;
+
+ error = acpi_dev_pm_full_power(adev);
+ __acpi_device_sleep_wake(adev, ACPI_STATE_UNKNOWN, false);
+ return error;
+}
+EXPORT_SYMBOL_GPL(acpi_dev_resume_early);
+
+/**
+ * acpi_subsys_prepare - Prepare device for system transition to a sleep state.
+ * @dev: Device to prepare.
+ */
+int acpi_subsys_prepare(struct device *dev)
+{
+ /*
+ * Follow PCI and resume devices suspended at run time before running
+ * their system suspend callbacks.
+ */
+ pm_runtime_resume(dev);
+ return pm_generic_prepare(dev);
+}
+EXPORT_SYMBOL_GPL(acpi_subsys_prepare);
+
+/**
+ * acpi_subsys_suspend_late - Suspend device using ACPI.
+ * @dev: Device to suspend.
+ *
+ * Carry out the generic late suspend procedure for @dev and use ACPI to put
+ * it into a low-power state during system transition into a sleep state.
+ */
+int acpi_subsys_suspend_late(struct device *dev)
+{
+ int ret = pm_generic_suspend_late(dev);
+ return ret ? ret : acpi_dev_suspend_late(dev);
+}
+EXPORT_SYMBOL_GPL(acpi_subsys_suspend_late);
+
+/**
+ * acpi_subsys_resume_early - Resume device using ACPI.
+ * @dev: Device to Resume.
+ *
+ * Use ACPI to put the given device into the full-power state and carry out the
+ * generic early resume procedure for it during system transition into the
+ * working state.
+ */
+int acpi_subsys_resume_early(struct device *dev)
+{
+ int ret = acpi_dev_resume_early(dev);
+ return ret ? ret : pm_generic_resume_early(dev);
+}
+EXPORT_SYMBOL_GPL(acpi_subsys_resume_early);
+#endif /* CONFIG_PM_SLEEP */
+
+static struct dev_pm_domain acpi_general_pm_domain = {
+ .ops = {
+#ifdef CONFIG_PM_RUNTIME
+ .runtime_suspend = acpi_subsys_runtime_suspend,
+ .runtime_resume = acpi_subsys_runtime_resume,
+ .runtime_idle = pm_generic_runtime_idle,
+#endif
+#ifdef CONFIG_PM_SLEEP
+ .prepare = acpi_subsys_prepare,
+ .suspend_late = acpi_subsys_suspend_late,
+ .resume_early = acpi_subsys_resume_early,
+ .poweroff_late = acpi_subsys_suspend_late,
+ .restore_early = acpi_subsys_resume_early,
+#endif
+ },
+};
+
+/**
+ * acpi_dev_pm_attach - Prepare device for ACPI power management.
+ * @dev: Device to prepare.
+ * @power_on: Whether or not to power on the device.
+ *
+ * If @dev has a valid ACPI handle that has a valid struct acpi_device object
+ * attached to it, install a wakeup notification handler for the device and
+ * add it to the general ACPI PM domain. If @power_on is set, the device will
+ * be put into the ACPI D0 state before the function returns.
+ *
+ * This assumes that the @dev's bus type uses generic power management callbacks
+ * (or doesn't use any power management callbacks at all).
+ *
+ * Callers must ensure proper synchronization of this function with power
+ * management callbacks.
+ */
+int acpi_dev_pm_attach(struct device *dev, bool power_on)
+{
+ struct acpi_device *adev = acpi_dev_pm_get_node(dev);
+
+ if (!adev)
+ return -ENODEV;
+
+ if (dev->pm_domain)
+ return -EEXIST;
+
+ acpi_add_pm_notifier(adev, acpi_wakeup_device, dev);
+ dev->pm_domain = &acpi_general_pm_domain;
+ if (power_on) {
+ acpi_dev_pm_full_power(adev);
+ __acpi_device_run_wake(adev, false);
+ }
+ return 0;
+}
+EXPORT_SYMBOL_GPL(acpi_dev_pm_attach);
+
+/**
+ * acpi_dev_pm_detach - Remove ACPI power management from the device.
+ * @dev: Device to take care of.
+ * @power_off: Whether or not to try to remove power from the device.
+ *
+ * Remove the device from the general ACPI PM domain and remove its wakeup
+ * notifier. If @power_off is set, additionally remove power from the device if
+ * possible.
+ *
+ * Callers must ensure proper synchronization of this function with power
+ * management callbacks.
+ */
+void acpi_dev_pm_detach(struct device *dev, bool power_off)
+{
+ struct acpi_device *adev = acpi_dev_pm_get_node(dev);
+
+ if (adev && dev->pm_domain == &acpi_general_pm_domain) {
+ dev->pm_domain = NULL;
+ acpi_remove_pm_notifier(adev, acpi_wakeup_device);
+ if (power_off) {
+ /*
+ * If the device's PM QoS resume latency limit or flags
+ * have been exposed to user space, they have to be
+ * hidden at this point, so that they don't affect the
+ * choice of the low-power state to put the device into.
+ */
+ dev_pm_qos_hide_latency_limit(dev);
+ dev_pm_qos_hide_flags(dev);
+ __acpi_device_run_wake(adev, false);
+ acpi_dev_pm_low_power(dev, adev, ACPI_STATE_S0);
+ }
+ }
+}
+EXPORT_SYMBOL_GPL(acpi_dev_pm_detach);
diff --git a/drivers/acpi/dock.c b/drivers/acpi/dock.c
index 88eb143..f32bd47 100644
--- a/drivers/acpi/dock.c
+++ b/drivers/acpi/dock.c
@@ -31,6 +31,7 @@
#include <linux/platform_device.h>
#include <linux/jiffies.h>
#include <linux/stddef.h>
+#include <linux/acpi.h>
#include <acpi/acpi_bus.h>
#include <acpi/acpi_drivers.h>
@@ -460,12 +461,8 @@
struct acpi_object_list arg_list;
union acpi_object arg;
struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
- struct acpi_buffer name_buffer = { ACPI_ALLOCATE_BUFFER, NULL };
- acpi_get_name(ds->handle, ACPI_FULL_PATHNAME, &name_buffer);
-
- printk(KERN_INFO PREFIX "%s - %s\n",
- (char *)name_buffer.pointer, dock ? "docking" : "undocking");
+ acpi_handle_info(ds->handle, "%s\n", dock ? "docking" : "undocking");
/* _DCK method has one argument */
arg_list.count = 1;
@@ -474,11 +471,10 @@
arg.integer.value = dock;
status = acpi_evaluate_object(ds->handle, "_DCK", &arg_list, &buffer);
if (ACPI_FAILURE(status) && status != AE_NOT_FOUND)
- ACPI_EXCEPTION((AE_INFO, status, "%s - failed to execute"
- " _DCK\n", (char *)name_buffer.pointer));
+ acpi_handle_err(ds->handle, "Failed to execute _DCK (0x%x)\n",
+ status);
kfree(buffer.pointer);
- kfree(name_buffer.pointer);
}
static inline void dock(struct dock_station *ds)
@@ -525,9 +521,11 @@
status = acpi_evaluate_object(ds->handle, "_LCK", &arg_list, NULL);
if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
if (lock)
- printk(KERN_WARNING PREFIX "Locking device failed\n");
+ acpi_handle_warn(ds->handle,
+ "Locking device failed (0x%x)\n", status);
else
- printk(KERN_WARNING PREFIX "Unlocking device failed\n");
+ acpi_handle_warn(ds->handle,
+ "Unlocking device failed (0x%x)\n", status);
}
}
@@ -667,7 +665,7 @@
dock_lock(ds, 0);
eject_dock(ds);
if (dock_present(ds)) {
- printk(KERN_ERR PREFIX "Unable to undock!\n");
+ acpi_handle_err(ds->handle, "Unable to undock!\n");
return -EBUSY;
}
complete_undock(ds);
@@ -715,7 +713,7 @@
begin_dock(ds);
dock(ds);
if (!dock_present(ds)) {
- printk(KERN_ERR PREFIX "Unable to dock!\n");
+ acpi_handle_err(handle, "Unable to dock!\n");
complete_dock(ds);
break;
}
@@ -743,7 +741,7 @@
dock_event(ds, event, UNDOCK_EVENT);
break;
default:
- printk(KERN_ERR PREFIX "Unknown dock event %d\n", event);
+ acpi_handle_err(handle, "Unknown dock event %d\n", event);
}
}
@@ -987,7 +985,7 @@
sysfs_remove_group(&dd->dev.kobj, &dock_attribute_group);
err_unregister:
platform_device_unregister(dd);
- printk(KERN_ERR "%s encountered error %d\n", __func__, ret);
+ acpi_handle_err(handle, "%s encountered error %d\n", __func__, ret);
return ret;
}
@@ -1016,51 +1014,39 @@
}
/**
- * find_dock - look for a dock station
+ * find_dock_and_bay - look for dock stations and bays
* @handle: acpi handle of a device
* @lvl: unused
- * @context: counter of dock stations found
+ * @context: unused
* @rv: unused
*
- * This is called by acpi_walk_namespace to look for dock stations.
+ * This is called by acpi_walk_namespace to look for dock stations and bays.
*/
static __init acpi_status
-find_dock(acpi_handle handle, u32 lvl, void *context, void **rv)
+find_dock_and_bay(acpi_handle handle, u32 lvl, void *context, void **rv)
{
- if (is_dock(handle))
+ if (is_dock(handle) || is_ejectable_bay(handle))
dock_add(handle);
return AE_OK;
}
-static __init acpi_status
-find_bay(acpi_handle handle, u32 lvl, void *context, void **rv)
-{
- /* If bay is a dock, it's already handled */
- if (is_ejectable_bay(handle) && !is_dock(handle))
- dock_add(handle);
- return AE_OK;
-}
-
static int __init dock_init(void)
{
if (acpi_disabled)
return 0;
- /* look for a dock station */
+ /* look for dock stations and bays */
acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
- ACPI_UINT32_MAX, find_dock, NULL, NULL, NULL);
+ ACPI_UINT32_MAX, find_dock_and_bay, NULL, NULL, NULL);
- /* look for bay */
- acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
- ACPI_UINT32_MAX, find_bay, NULL, NULL, NULL);
if (!dock_station_count) {
- printk(KERN_INFO PREFIX "No dock devices found.\n");
+ pr_info(PREFIX "No dock devices found.\n");
return 0;
}
register_acpi_bus_notifier(&dock_acpi_notifier);
- printk(KERN_INFO PREFIX "%s: %d docks/bays found\n",
+ pr_info(PREFIX "%s: %d docks/bays found\n",
ACPI_DOCK_DRIVER_DESCRIPTION, dock_station_count);
return 0;
}
diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
index a51df96..354007d 100644
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -158,10 +158,10 @@
{
unsigned long flags;
int ret = 0;
- spin_lock_irqsave(&ec->curr_lock, flags);
+ spin_lock_irqsave(&ec->lock, flags);
if (!ec->curr || ec->curr->done)
ret = 1;
- spin_unlock_irqrestore(&ec->curr_lock, flags);
+ spin_unlock_irqrestore(&ec->lock, flags);
return ret;
}
@@ -175,32 +175,38 @@
static void advance_transaction(struct acpi_ec *ec, u8 status)
{
unsigned long flags;
- spin_lock_irqsave(&ec->curr_lock, flags);
- if (!ec->curr)
+ struct transaction *t = ec->curr;
+
+ spin_lock_irqsave(&ec->lock, flags);
+ if (!t)
goto unlock;
- if (ec->curr->wlen > ec->curr->wi) {
+ if (t->wlen > t->wi) {
if ((status & ACPI_EC_FLAG_IBF) == 0)
acpi_ec_write_data(ec,
- ec->curr->wdata[ec->curr->wi++]);
+ t->wdata[t->wi++]);
else
goto err;
- } else if (ec->curr->rlen > ec->curr->ri) {
+ } else if (t->rlen > t->ri) {
if ((status & ACPI_EC_FLAG_OBF) == 1) {
- ec->curr->rdata[ec->curr->ri++] = acpi_ec_read_data(ec);
- if (ec->curr->rlen == ec->curr->ri)
- ec->curr->done = true;
+ t->rdata[t->ri++] = acpi_ec_read_data(ec);
+ if (t->rlen == t->ri)
+ t->done = true;
} else
goto err;
- } else if (ec->curr->wlen == ec->curr->wi &&
+ } else if (t->wlen == t->wi &&
(status & ACPI_EC_FLAG_IBF) == 0)
- ec->curr->done = true;
+ t->done = true;
goto unlock;
err:
- /* false interrupt, state didn't change */
- if (in_interrupt())
- ++ec->curr->irq_count;
+ /*
+ * If SCI bit is set, then don't think it's a false IRQ
+ * otherwise will take a not handled IRQ as a false one.
+ */
+ if (in_interrupt() && !(status & ACPI_EC_FLAG_SCI))
+ ++t->irq_count;
+
unlock:
- spin_unlock_irqrestore(&ec->curr_lock, flags);
+ spin_unlock_irqrestore(&ec->lock, flags);
}
static int acpi_ec_sync_query(struct acpi_ec *ec);
@@ -238,9 +244,9 @@
if (acpi_ec_read_status(ec) & ACPI_EC_FLAG_IBF)
break;
pr_debug(PREFIX "controller reset, restart transaction\n");
- spin_lock_irqsave(&ec->curr_lock, flags);
+ spin_lock_irqsave(&ec->lock, flags);
start_transaction(ec);
- spin_unlock_irqrestore(&ec->curr_lock, flags);
+ spin_unlock_irqrestore(&ec->lock, flags);
}
return -ETIME;
}
@@ -253,17 +259,17 @@
if (EC_FLAGS_MSI)
udelay(ACPI_EC_MSI_UDELAY);
/* start transaction */
- spin_lock_irqsave(&ec->curr_lock, tmp);
+ spin_lock_irqsave(&ec->lock, tmp);
/* following two actions should be kept atomic */
ec->curr = t;
start_transaction(ec);
if (ec->curr->command == ACPI_EC_COMMAND_QUERY)
clear_bit(EC_FLAGS_QUERY_PENDING, &ec->flags);
- spin_unlock_irqrestore(&ec->curr_lock, tmp);
+ spin_unlock_irqrestore(&ec->lock, tmp);
ret = ec_poll(ec);
- spin_lock_irqsave(&ec->curr_lock, tmp);
+ spin_lock_irqsave(&ec->lock, tmp);
ec->curr = NULL;
- spin_unlock_irqrestore(&ec->curr_lock, tmp);
+ spin_unlock_irqrestore(&ec->lock, tmp);
return ret;
}
@@ -292,7 +298,7 @@
return -EINVAL;
if (t->rdata)
memset(t->rdata, 0, t->rlen);
- mutex_lock(&ec->lock);
+ mutex_lock(&ec->mutex);
if (test_bit(EC_FLAGS_BLOCKED, &ec->flags)) {
status = -EINVAL;
goto unlock;
@@ -310,7 +316,8 @@
status = -ETIME;
goto end;
}
- pr_debug(PREFIX "transaction start\n");
+ pr_debug(PREFIX "transaction start (cmd=0x%02x, addr=0x%02x)\n",
+ t->command, t->wdata ? t->wdata[0] : 0);
/* disable GPE during transaction if storm is detected */
if (test_bit(EC_FLAGS_GPE_STORM, &ec->flags)) {
/* It has to be disabled, so that it doesn't trigger. */
@@ -326,8 +333,9 @@
/* It is safe to enable the GPE outside of the transaction. */
acpi_enable_gpe(NULL, ec->gpe);
} else if (t->irq_count > ec_storm_threshold) {
- pr_info(PREFIX "GPE storm detected, "
- "transactions will use polling mode\n");
+ pr_info(PREFIX "GPE storm detected(%d GPEs), "
+ "transactions will use polling mode\n",
+ t->irq_count);
set_bit(EC_FLAGS_GPE_STORM, &ec->flags);
}
pr_debug(PREFIX "transaction end\n");
@@ -335,7 +343,7 @@
if (ec->global_lock)
acpi_release_global_lock(glk);
unlock:
- mutex_unlock(&ec->lock);
+ mutex_unlock(&ec->mutex);
return status;
}
@@ -403,7 +411,7 @@
EXPORT_SYMBOL(ec_burst_disable);
-int ec_read(u8 addr, u8 * val)
+int ec_read(u8 addr, u8 *val)
{
int err;
u8 temp_data;
@@ -468,10 +476,10 @@
if (!ec)
return;
- mutex_lock(&ec->lock);
+ mutex_lock(&ec->mutex);
/* Prevent transactions from being carried out */
set_bit(EC_FLAGS_BLOCKED, &ec->flags);
- mutex_unlock(&ec->lock);
+ mutex_unlock(&ec->mutex);
}
void acpi_ec_unblock_transactions(void)
@@ -481,10 +489,10 @@
if (!ec)
return;
- mutex_lock(&ec->lock);
+ mutex_lock(&ec->mutex);
/* Allow transactions to be carried out again */
clear_bit(EC_FLAGS_BLOCKED, &ec->flags);
- mutex_unlock(&ec->lock);
+ mutex_unlock(&ec->mutex);
}
void acpi_ec_unblock_transactions_early(void)
@@ -536,9 +544,9 @@
handler->handle = handle;
handler->func = func;
handler->data = data;
- mutex_lock(&ec->lock);
+ mutex_lock(&ec->mutex);
list_add(&handler->node, &ec->list);
- mutex_unlock(&ec->lock);
+ mutex_unlock(&ec->mutex);
return 0;
}
@@ -547,14 +555,14 @@
void acpi_ec_remove_query_handler(struct acpi_ec *ec, u8 query_bit)
{
struct acpi_ec_query_handler *handler, *tmp;
- mutex_lock(&ec->lock);
+ mutex_lock(&ec->mutex);
list_for_each_entry_safe(handler, tmp, &ec->list, node) {
if (query_bit == handler->query_bit) {
list_del(&handler->node);
kfree(handler);
}
}
- mutex_unlock(&ec->lock);
+ mutex_unlock(&ec->mutex);
}
EXPORT_SYMBOL_GPL(acpi_ec_remove_query_handler);
@@ -601,9 +609,9 @@
struct acpi_ec *ec = ec_cxt;
if (!ec)
return;
- mutex_lock(&ec->lock);
+ mutex_lock(&ec->mutex);
acpi_ec_sync_query(ec);
- mutex_unlock(&ec->lock);
+ mutex_unlock(&ec->mutex);
}
static int ec_check_sci(struct acpi_ec *ec, u8 state)
@@ -622,10 +630,11 @@
u32 gpe_number, void *data)
{
struct acpi_ec *ec = data;
+ u8 status = acpi_ec_read_status(ec);
- pr_debug(PREFIX "~~~> interrupt\n");
+ pr_debug(PREFIX "~~~> interrupt, status:0x%02x\n", status);
- advance_transaction(ec, acpi_ec_read_status(ec));
+ advance_transaction(ec, status);
if (ec_transaction_done(ec) &&
(acpi_ec_read_status(ec) & ACPI_EC_FLAG_IBF) == 0) {
wake_up(&ec->wait);
@@ -691,10 +700,10 @@
if (!ec)
return NULL;
ec->flags = 1 << EC_FLAGS_QUERY_PENDING;
- mutex_init(&ec->lock);
+ mutex_init(&ec->mutex);
init_waitqueue_head(&ec->wait);
INIT_LIST_HEAD(&ec->list);
- spin_lock_init(&ec->curr_lock);
+ spin_lock_init(&ec->lock);
return ec;
}
@@ -853,12 +862,12 @@
ec = acpi_driver_data(device);
ec_remove_handlers(ec);
- mutex_lock(&ec->lock);
+ mutex_lock(&ec->mutex);
list_for_each_entry_safe(handler, tmp, &ec->list, node) {
list_del(&handler->node);
kfree(handler);
}
- mutex_unlock(&ec->lock);
+ mutex_unlock(&ec->mutex);
release_region(ec->data_addr, 1);
release_region(ec->command_addr, 1);
device->driver_data = NULL;
diff --git a/drivers/acpi/glue.c b/drivers/acpi/glue.c
index 0837308..0155184 100644
--- a/drivers/acpi/glue.c
+++ b/drivers/acpi/glue.c
@@ -130,46 +130,59 @@
{
struct acpi_device *acpi_dev;
acpi_status status;
- struct acpi_device_physical_node *physical_node;
+ struct acpi_device_physical_node *physical_node, *pn;
char physical_node_name[sizeof(PHYSICAL_NODE_STRING) + 2];
int retval = -EINVAL;
- if (dev->archdata.acpi_handle) {
- dev_warn(dev, "Drivers changed 'acpi_handle'\n");
- return -EINVAL;
+ if (ACPI_HANDLE(dev)) {
+ if (handle) {
+ dev_warn(dev, "ACPI handle is already set\n");
+ return -EINVAL;
+ } else {
+ handle = ACPI_HANDLE(dev);
+ }
}
+ if (!handle)
+ return -EINVAL;
get_device(dev);
status = acpi_bus_get_device(handle, &acpi_dev);
if (ACPI_FAILURE(status))
goto err;
- physical_node = kzalloc(sizeof(struct acpi_device_physical_node),
- GFP_KERNEL);
+ physical_node = kzalloc(sizeof(*physical_node), GFP_KERNEL);
if (!physical_node) {
retval = -ENOMEM;
goto err;
}
mutex_lock(&acpi_dev->physical_node_lock);
+
+ /* Sanity check. */
+ list_for_each_entry(pn, &acpi_dev->physical_node_list, node)
+ if (pn->dev == dev) {
+ dev_warn(dev, "Already associated with ACPI node\n");
+ goto err_free;
+ }
+
/* allocate physical node id according to physical_node_id_bitmap */
physical_node->node_id =
find_first_zero_bit(acpi_dev->physical_node_id_bitmap,
ACPI_MAX_PHYSICAL_NODE);
if (physical_node->node_id >= ACPI_MAX_PHYSICAL_NODE) {
retval = -ENOSPC;
- mutex_unlock(&acpi_dev->physical_node_lock);
- kfree(physical_node);
- goto err;
+ goto err_free;
}
set_bit(physical_node->node_id, acpi_dev->physical_node_id_bitmap);
physical_node->dev = dev;
list_add_tail(&physical_node->node, &acpi_dev->physical_node_list);
acpi_dev->physical_node_count++;
+
mutex_unlock(&acpi_dev->physical_node_lock);
- dev->archdata.acpi_handle = handle;
+ if (!ACPI_HANDLE(dev))
+ ACPI_HANDLE_SET(dev, acpi_dev->handle);
if (!physical_node->node_id)
strcpy(physical_node_name, PHYSICAL_NODE_STRING);
@@ -187,8 +200,14 @@
return 0;
err:
+ ACPI_HANDLE_SET(dev, NULL);
put_device(dev);
return retval;
+
+ err_free:
+ mutex_unlock(&acpi_dev->physical_node_lock);
+ kfree(physical_node);
+ goto err;
}
static int acpi_unbind_one(struct device *dev)
@@ -198,11 +217,10 @@
acpi_status status;
struct list_head *node, *next;
- if (!dev->archdata.acpi_handle)
+ if (!ACPI_HANDLE(dev))
return 0;
- status = acpi_bus_get_device(dev->archdata.acpi_handle,
- &acpi_dev);
+ status = acpi_bus_get_device(ACPI_HANDLE(dev), &acpi_dev);
if (ACPI_FAILURE(status))
goto err;
@@ -228,7 +246,7 @@
sysfs_remove_link(&acpi_dev->dev.kobj, physical_node_name);
sysfs_remove_link(&dev->kobj, "firmware_node");
- dev->archdata.acpi_handle = NULL;
+ ACPI_HANDLE_SET(dev, NULL);
/* acpi_bind_one increase refcnt by one */
put_device(dev);
kfree(entry);
@@ -248,6 +266,10 @@
acpi_handle handle;
int ret = -EINVAL;
+ ret = acpi_bind_one(dev, NULL);
+ if (!ret)
+ goto out;
+
if (!dev->bus || !dev->parent) {
/* bridge devices genernally haven't bus or parent */
ret = acpi_find_bridge_device(dev, &handle);
@@ -261,16 +283,16 @@
}
if ((ret = type->find_device(dev, &handle)) != 0)
DBG("Can't get handler for %s\n", dev_name(dev));
- end:
+ end:
if (!ret)
acpi_bind_one(dev, handle);
+ out:
#if ACPI_GLUE_DEBUG
if (!ret) {
struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
- acpi_get_name(dev->archdata.acpi_handle,
- ACPI_FULL_PATHNAME, &buffer);
+ acpi_get_name(dev->acpi_handle, ACPI_FULL_PATHNAME, &buffer);
DBG("Device %s -> %s\n", dev_name(dev), (char *)buffer.pointer);
kfree(buffer.pointer);
} else
diff --git a/drivers/acpi/hed.c b/drivers/acpi/hed.c
index 20a0f2c..a0cc796 100644
--- a/drivers/acpi/hed.c
+++ b/drivers/acpi/hed.c
@@ -61,7 +61,7 @@
blocking_notifier_call_chain(&acpi_hed_notify_list, 0, NULL);
}
-static int __devinit acpi_hed_add(struct acpi_device *device)
+static int acpi_hed_add(struct acpi_device *device)
{
/* Only one hardware error device */
if (hed_handle)
@@ -70,7 +70,7 @@
return 0;
}
-static int __devexit acpi_hed_remove(struct acpi_device *device, int type)
+static int acpi_hed_remove(struct acpi_device *device, int type)
{
hed_handle = NULL;
return 0;
diff --git a/drivers/acpi/internal.h b/drivers/acpi/internal.h
index ca75b9c..3c407cd 100644
--- a/drivers/acpi/internal.h
+++ b/drivers/acpi/internal.h
@@ -58,11 +58,11 @@
unsigned long data_addr;
unsigned long global_lock;
unsigned long flags;
- struct mutex lock;
+ struct mutex mutex;
wait_queue_head_t wait;
struct list_head list;
struct transaction *curr;
- spinlock_t curr_lock;
+ spinlock_t lock;
};
extern struct acpi_ec *first_ec;
@@ -93,4 +93,11 @@
static inline void suspend_nvs_restore(void) {}
#endif
+/*--------------------------------------------------------------------------
+ Platform bus support
+ -------------------------------------------------------------------------- */
+struct platform_device;
+
+struct platform_device *acpi_create_platform_device(struct acpi_device *adev);
+
#endif /* _ACPI_INTERNAL_H_ */
diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c
index 9eaf708..6dc4a2b 100644
--- a/drivers/acpi/osl.c
+++ b/drivers/acpi/osl.c
@@ -932,7 +932,7 @@
* having a static work_struct.
*/
- dpc = kmalloc(sizeof(struct acpi_os_dpc), GFP_ATOMIC);
+ dpc = kzalloc(sizeof(struct acpi_os_dpc), GFP_ATOMIC);
if (!dpc)
return AE_NO_MEMORY;
@@ -944,17 +944,22 @@
* because the hotplug code may call driver .remove() functions,
* which invoke flush_scheduled_work/acpi_os_wait_events_complete
* to flush these workqueues.
+ *
+ * To prevent lockdep from complaining unnecessarily, make sure that
+ * there is a different static lockdep key for each workqueue by using
+ * INIT_WORK() for each of them separately.
*/
- queue = hp ? kacpi_hotplug_wq :
- (type == OSL_NOTIFY_HANDLER ? kacpi_notify_wq : kacpid_wq);
- dpc->wait = hp ? 1 : 0;
-
- if (queue == kacpi_hotplug_wq)
+ if (hp) {
+ queue = kacpi_hotplug_wq;
+ dpc->wait = 1;
INIT_WORK(&dpc->work, acpi_os_execute_deferred);
- else if (queue == kacpi_notify_wq)
+ } else if (type == OSL_NOTIFY_HANDLER) {
+ queue = kacpi_notify_wq;
INIT_WORK(&dpc->work, acpi_os_execute_deferred);
- else
+ } else {
+ queue = kacpid_wq;
INIT_WORK(&dpc->work, acpi_os_execute_deferred);
+ }
/*
* On some machines, a software-initiated SMI causes corruption unless
@@ -986,6 +991,7 @@
{
return __acpi_os_execute(0, function, context, 1);
}
+EXPORT_SYMBOL(acpi_os_hotplug_execute);
void acpi_os_wait_events_complete(void)
{
diff --git a/drivers/acpi/pci_irq.c b/drivers/acpi/pci_irq.c
index 0eefa12..23a0324 100644
--- a/drivers/acpi/pci_irq.c
+++ b/drivers/acpi/pci_irq.c
@@ -459,19 +459,19 @@
*/
if (gsi < 0) {
u32 dev_gsi;
- dev_warn(&dev->dev, "PCI INT %c: no GSI", pin_name(pin));
/* Interrupt Line values above 0xF are forbidden */
if (dev->irq > 0 && (dev->irq <= 0xF) &&
(acpi_isa_irq_to_gsi(dev->irq, &dev_gsi) == 0)) {
- printk(" - using ISA IRQ %d\n", dev->irq);
+ dev_warn(&dev->dev, "PCI INT %c: no GSI - using ISA IRQ %d\n",
+ pin_name(pin), dev->irq);
acpi_register_gsi(&dev->dev, dev_gsi,
ACPI_LEVEL_SENSITIVE,
ACPI_ACTIVE_LOW);
- return 0;
} else {
- printk("\n");
- return 0;
+ dev_warn(&dev->dev, "PCI INT %c: no GSI\n",
+ pin_name(pin));
}
+ return 0;
}
rc = acpi_register_gsi(&dev->dev, gsi, triggering, polarity);
@@ -495,11 +495,6 @@
return 0;
}
-/* FIXME: implement x86/x86_64 version */
-void __attribute__ ((weak)) acpi_unregister_gsi(u32 i)
-{
-}
-
void acpi_pci_irq_disable(struct pci_dev *dev)
{
struct acpi_prt_entry *entry;
diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c
index bce469c..f70b9e5 100644
--- a/drivers/acpi/pci_root.c
+++ b/drivers/acpi/pci_root.c
@@ -445,7 +445,7 @@
}
EXPORT_SYMBOL(acpi_pci_osc_control_set);
-static int __devinit acpi_pci_root_add(struct acpi_device *device)
+static int acpi_pci_root_add(struct acpi_device *device)
{
unsigned long long segment, bus;
acpi_status status;
diff --git a/drivers/acpi/power.c b/drivers/acpi/power.c
index 40e38a0..7db61b8 100644
--- a/drivers/acpi/power.c
+++ b/drivers/acpi/power.c
@@ -473,7 +473,7 @@
return ret;
no_power_resource:
- printk(KERN_DEBUG PREFIX "Invalid Power Resource to register!");
+ printk(KERN_DEBUG PREFIX "Invalid Power Resource to register!\n");
return -ENODEV;
}
EXPORT_SYMBOL_GPL(acpi_power_resource_register_device);
diff --git a/drivers/acpi/proc.c b/drivers/acpi/proc.c
index 27adb09..ef98796 100644
--- a/drivers/acpi/proc.c
+++ b/drivers/acpi/proc.c
@@ -362,16 +362,13 @@
struct list_head *node, *next;
char strbuf[5];
char str[5] = "";
- unsigned int len = count;
- if (len > 4)
- len = 4;
- if (len < 0)
- return -EFAULT;
+ if (count > 4)
+ count = 4;
- if (copy_from_user(strbuf, buffer, len))
+ if (copy_from_user(strbuf, buffer, count))
return -EFAULT;
- strbuf[len] = '\0';
+ strbuf[count] = '\0';
sscanf(strbuf, "%s", str);
mutex_lock(&acpi_device_lock);
diff --git a/drivers/acpi/processor_driver.c b/drivers/acpi/processor_driver.c
index bd4e5dc..e83311b 100644
--- a/drivers/acpi/processor_driver.c
+++ b/drivers/acpi/processor_driver.c
@@ -44,6 +44,7 @@
#include <linux/moduleparam.h>
#include <linux/cpuidle.h>
#include <linux/slab.h>
+#include <linux/acpi.h>
#include <asm/io.h>
#include <asm/cpu.h>
@@ -282,7 +283,9 @@
/* Declared with "Processor" statement; match ProcessorID */
status = acpi_evaluate_object(pr->handle, NULL, NULL, &buffer);
if (ACPI_FAILURE(status)) {
- printk(KERN_ERR PREFIX "Evaluating processor object\n");
+ dev_err(&device->dev,
+ "Failed to evaluate processor object (0x%x)\n",
+ status);
return -ENODEV;
}
@@ -301,8 +304,9 @@
status = acpi_evaluate_integer(pr->handle, METHOD_NAME__UID,
NULL, &value);
if (ACPI_FAILURE(status)) {
- printk(KERN_ERR PREFIX
- "Evaluating processor _UID [%#x]\n", status);
+ dev_err(&device->dev,
+ "Failed to evaluate processor _UID (0x%x)\n",
+ status);
return -ENODEV;
}
device_declaration = 1;
@@ -345,7 +349,7 @@
if (!object.processor.pblk_address)
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No PBLK (NULL address)\n"));
else if (object.processor.pblk_length != 6)
- printk(KERN_ERR PREFIX "Invalid PBLK length [%d]\n",
+ dev_err(&device->dev, "Invalid PBLK length [%d]\n",
object.processor.pblk_length);
else {
pr->throttling.address = object.processor.pblk_address;
@@ -430,8 +434,8 @@
* Initialize missing things
*/
if (pr->flags.need_hotplug_init) {
- printk(KERN_INFO "Will online and init hotplugged "
- "CPU: %d\n", pr->id);
+ pr_info("Will online and init hotplugged CPU: %d\n",
+ pr->id);
WARN(acpi_processor_start(pr), "Failed to start CPU:"
" %d\n", pr->id);
pr->flags.need_hotplug_init = 0;
@@ -492,14 +496,16 @@
&pr->cdev->device.kobj,
"thermal_cooling");
if (result) {
- printk(KERN_ERR PREFIX "Create sysfs link\n");
+ dev_err(&device->dev,
+ "Failed to create sysfs link 'thermal_cooling'\n");
goto err_thermal_unregister;
}
result = sysfs_create_link(&pr->cdev->device.kobj,
&device->dev.kobj,
"device");
if (result) {
- printk(KERN_ERR PREFIX "Create sysfs link\n");
+ dev_err(&pr->cdev->device,
+ "Failed to create sysfs link 'device'\n");
goto err_remove_sysfs_thermal;
}
@@ -561,8 +567,9 @@
*/
if (per_cpu(processor_device_array, pr->id) != NULL &&
per_cpu(processor_device_array, pr->id) != device) {
- printk(KERN_WARNING "BIOS reported wrong ACPI id "
- "for the processor\n");
+ dev_warn(&device->dev,
+ "BIOS reported wrong ACPI id %d for the processor\n",
+ pr->id);
result = -ENODEV;
goto err_free_cpumask;
}
@@ -695,8 +702,8 @@
static void acpi_processor_hotplug_notify(acpi_handle handle,
u32 event, void *data)
{
- struct acpi_processor *pr;
struct acpi_device *device = NULL;
+ struct acpi_eject_event *ej_event = NULL;
u32 ost_code = ACPI_OST_SC_NON_SPECIFIC_FAILURE; /* default */
int result;
@@ -716,7 +723,7 @@
result = acpi_processor_device_add(handle, &device);
if (result) {
- printk(KERN_ERR PREFIX "Unable to add the device\n");
+ acpi_handle_err(handle, "Unable to add the device\n");
break;
}
@@ -728,20 +735,29 @@
"received ACPI_NOTIFY_EJECT_REQUEST\n"));
if (acpi_bus_get_device(handle, &device)) {
- printk(KERN_ERR PREFIX
- "Device don't exist, dropping EJECT\n");
+ acpi_handle_err(handle,
+ "Device don't exist, dropping EJECT\n");
break;
}
- pr = acpi_driver_data(device);
- if (!pr) {
- printk(KERN_ERR PREFIX
- "Driver data is NULL, dropping EJECT\n");
+ if (!acpi_driver_data(device)) {
+ acpi_handle_err(handle,
+ "Driver data is NULL, dropping EJECT\n");
break;
}
- /* REVISIT: update when eject is supported */
- ost_code = ACPI_OST_SC_EJECT_NOT_SUPPORTED;
- break;
+ ej_event = kmalloc(sizeof(*ej_event), GFP_KERNEL);
+ if (!ej_event) {
+ acpi_handle_err(handle, "No memory, dropping EJECT\n");
+ break;
+ }
+
+ ej_event->handle = handle;
+ ej_event->event = ACPI_NOTIFY_EJECT_REQUEST;
+ acpi_os_hotplug_execute(acpi_bus_hot_remove_device,
+ (void *)ej_event);
+
+ /* eject is performed asynchronously */
+ return;
default:
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
@@ -841,7 +857,7 @@
* and do it when the CPU gets online the first time
* TBD: Cleanup above functions and try to do this more elegant.
*/
- printk(KERN_INFO "CPU %d got hotplugged\n", pr->id);
+ pr_info("CPU %d got hotplugged\n", pr->id);
pr->flags.need_hotplug_init = 1;
return AE_OK;
@@ -852,8 +868,22 @@
if (cpu_online(pr->id))
cpu_down(pr->id);
+ get_online_cpus();
+ /*
+ * The cpu might become online again at this point. So we check whether
+ * the cpu has been onlined or not. If the cpu became online, it means
+ * that someone wants to use the cpu. So acpi_processor_handle_eject()
+ * returns -EAGAIN.
+ */
+ if (unlikely(cpu_online(pr->id))) {
+ put_online_cpus();
+ pr_warn("Failed to remove CPU %d, because other task "
+ "brought the CPU back online\n", pr->id);
+ return -EAGAIN;
+ }
arch_unregister_cpu(pr->id);
acpi_unmap_lsapic(pr->id);
+ put_online_cpus();
return (0);
}
#else
diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index e8086c7..f1a5da4 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -735,31 +735,18 @@
static int acpi_idle_enter_c1(struct cpuidle_device *dev,
struct cpuidle_driver *drv, int index)
{
- ktime_t kt1, kt2;
- s64 idle_time;
struct acpi_processor *pr;
struct cpuidle_state_usage *state_usage = &dev->states_usage[index];
struct acpi_processor_cx *cx = cpuidle_get_statedata(state_usage);
pr = __this_cpu_read(processors);
- dev->last_residency = 0;
if (unlikely(!pr))
return -EINVAL;
- local_irq_disable();
-
-
lapic_timer_state_broadcast(pr, cx, 1);
- kt1 = ktime_get_real();
acpi_idle_do_entry(cx);
- kt2 = ktime_get_real();
- idle_time = ktime_to_us(ktime_sub(kt2, kt1));
- /* Update device last_residency*/
- dev->last_residency = (int)idle_time;
-
- local_irq_enable();
lapic_timer_state_broadcast(pr, cx, 0);
return index;
@@ -806,19 +793,12 @@
struct acpi_processor *pr;
struct cpuidle_state_usage *state_usage = &dev->states_usage[index];
struct acpi_processor_cx *cx = cpuidle_get_statedata(state_usage);
- ktime_t kt1, kt2;
- s64 idle_time_ns;
- s64 idle_time;
pr = __this_cpu_read(processors);
- dev->last_residency = 0;
if (unlikely(!pr))
return -EINVAL;
- local_irq_disable();
-
-
if (cx->entry_method != ACPI_CSTATE_FFH) {
current_thread_info()->status &= ~TS_POLLING;
/*
@@ -829,7 +809,6 @@
if (unlikely(need_resched())) {
current_thread_info()->status |= TS_POLLING;
- local_irq_enable();
return -EINVAL;
}
}
@@ -843,22 +822,12 @@
if (cx->type == ACPI_STATE_C3)
ACPI_FLUSH_CPU_CACHE();
- kt1 = ktime_get_real();
/* Tell the scheduler that we are going deep-idle: */
sched_clock_idle_sleep_event();
acpi_idle_do_entry(cx);
- kt2 = ktime_get_real();
- idle_time_ns = ktime_to_ns(ktime_sub(kt2, kt1));
- idle_time = idle_time_ns;
- do_div(idle_time, NSEC_PER_USEC);
- /* Update device last_residency*/
- dev->last_residency = (int)idle_time;
+ sched_clock_idle_wakeup_event(0);
- /* Tell the scheduler how much we idled: */
- sched_clock_idle_wakeup_event(idle_time_ns);
-
- local_irq_enable();
if (cx->entry_method != ACPI_CSTATE_FFH)
current_thread_info()->status |= TS_POLLING;
@@ -883,13 +852,8 @@
struct acpi_processor *pr;
struct cpuidle_state_usage *state_usage = &dev->states_usage[index];
struct acpi_processor_cx *cx = cpuidle_get_statedata(state_usage);
- ktime_t kt1, kt2;
- s64 idle_time_ns;
- s64 idle_time;
-
pr = __this_cpu_read(processors);
- dev->last_residency = 0;
if (unlikely(!pr))
return -EINVAL;
@@ -899,16 +863,11 @@
return drv->states[drv->safe_state_index].enter(dev,
drv, drv->safe_state_index);
} else {
- local_irq_disable();
acpi_safe_halt();
- local_irq_enable();
return -EBUSY;
}
}
- local_irq_disable();
-
-
if (cx->entry_method != ACPI_CSTATE_FFH) {
current_thread_info()->status &= ~TS_POLLING;
/*
@@ -919,7 +878,6 @@
if (unlikely(need_resched())) {
current_thread_info()->status |= TS_POLLING;
- local_irq_enable();
return -EINVAL;
}
}
@@ -934,7 +892,6 @@
*/
lapic_timer_state_broadcast(pr, cx, 1);
- kt1 = ktime_get_real();
/*
* disable bus master
* bm_check implies we need ARB_DIS
@@ -965,18 +922,9 @@
c3_cpu_count--;
raw_spin_unlock(&c3_lock);
}
- kt2 = ktime_get_real();
- idle_time_ns = ktime_to_ns(ktime_sub(kt2, kt1));
- idle_time = idle_time_ns;
- do_div(idle_time, NSEC_PER_USEC);
- /* Update device last_residency*/
- dev->last_residency = (int)idle_time;
+ sched_clock_idle_wakeup_event(0);
- /* Tell the scheduler how much we idled: */
- sched_clock_idle_wakeup_event(idle_time_ns);
-
- local_irq_enable();
if (cx->entry_method != ACPI_CSTATE_FFH)
current_thread_info()->status |= TS_POLLING;
@@ -987,6 +935,7 @@
struct cpuidle_driver acpi_idle_driver = {
.name = "acpi_idle",
.owner = THIS_MODULE,
+ .en_core_tk_irqen = 1,
};
/**
diff --git a/drivers/acpi/resource.c b/drivers/acpi/resource.c
new file mode 100644
index 0000000..a3868f6
--- /dev/null
+++ b/drivers/acpi/resource.c
@@ -0,0 +1,526 @@
+/*
+ * drivers/acpi/resource.c - ACPI device resources interpretation.
+ *
+ * Copyright (C) 2012, Intel Corp.
+ * Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ */
+
+#include <linux/acpi.h>
+#include <linux/device.h>
+#include <linux/export.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+
+#ifdef CONFIG_X86
+#define valid_IRQ(i) (((i) != 0) && ((i) != 2))
+#else
+#define valid_IRQ(i) (true)
+#endif
+
+static unsigned long acpi_dev_memresource_flags(u64 len, u8 write_protect,
+ bool window)
+{
+ unsigned long flags = IORESOURCE_MEM;
+
+ if (len == 0)
+ flags |= IORESOURCE_DISABLED;
+
+ if (write_protect == ACPI_READ_WRITE_MEMORY)
+ flags |= IORESOURCE_MEM_WRITEABLE;
+
+ if (window)
+ flags |= IORESOURCE_WINDOW;
+
+ return flags;
+}
+
+static void acpi_dev_get_memresource(struct resource *res, u64 start, u64 len,
+ u8 write_protect)
+{
+ res->start = start;
+ res->end = start + len - 1;
+ res->flags = acpi_dev_memresource_flags(len, write_protect, false);
+}
+
+/**
+ * acpi_dev_resource_memory - Extract ACPI memory resource information.
+ * @ares: Input ACPI resource object.
+ * @res: Output generic resource object.
+ *
+ * Check if the given ACPI resource object represents a memory resource and
+ * if that's the case, use the information in it to populate the generic
+ * resource object pointed to by @res.
+ */
+bool acpi_dev_resource_memory(struct acpi_resource *ares, struct resource *res)
+{
+ struct acpi_resource_memory24 *memory24;
+ struct acpi_resource_memory32 *memory32;
+ struct acpi_resource_fixed_memory32 *fixed_memory32;
+
+ switch (ares->type) {
+ case ACPI_RESOURCE_TYPE_MEMORY24:
+ memory24 = &ares->data.memory24;
+ acpi_dev_get_memresource(res, memory24->minimum,
+ memory24->address_length,
+ memory24->write_protect);
+ break;
+ case ACPI_RESOURCE_TYPE_MEMORY32:
+ memory32 = &ares->data.memory32;
+ acpi_dev_get_memresource(res, memory32->minimum,
+ memory32->address_length,
+ memory32->write_protect);
+ break;
+ case ACPI_RESOURCE_TYPE_FIXED_MEMORY32:
+ fixed_memory32 = &ares->data.fixed_memory32;
+ acpi_dev_get_memresource(res, fixed_memory32->address,
+ fixed_memory32->address_length,
+ fixed_memory32->write_protect);
+ break;
+ default:
+ return false;
+ }
+ return true;
+}
+EXPORT_SYMBOL_GPL(acpi_dev_resource_memory);
+
+static unsigned int acpi_dev_ioresource_flags(u64 start, u64 end, u8 io_decode,
+ bool window)
+{
+ int flags = IORESOURCE_IO;
+
+ if (io_decode == ACPI_DECODE_16)
+ flags |= IORESOURCE_IO_16BIT_ADDR;
+
+ if (start > end || end >= 0x10003)
+ flags |= IORESOURCE_DISABLED;
+
+ if (window)
+ flags |= IORESOURCE_WINDOW;
+
+ return flags;
+}
+
+static void acpi_dev_get_ioresource(struct resource *res, u64 start, u64 len,
+ u8 io_decode)
+{
+ u64 end = start + len - 1;
+
+ res->start = start;
+ res->end = end;
+ res->flags = acpi_dev_ioresource_flags(start, end, io_decode, false);
+}
+
+/**
+ * acpi_dev_resource_io - Extract ACPI I/O resource information.
+ * @ares: Input ACPI resource object.
+ * @res: Output generic resource object.
+ *
+ * Check if the given ACPI resource object represents an I/O resource and
+ * if that's the case, use the information in it to populate the generic
+ * resource object pointed to by @res.
+ */
+bool acpi_dev_resource_io(struct acpi_resource *ares, struct resource *res)
+{
+ struct acpi_resource_io *io;
+ struct acpi_resource_fixed_io *fixed_io;
+
+ switch (ares->type) {
+ case ACPI_RESOURCE_TYPE_IO:
+ io = &ares->data.io;
+ acpi_dev_get_ioresource(res, io->minimum,
+ io->address_length,
+ io->io_decode);
+ break;
+ case ACPI_RESOURCE_TYPE_FIXED_IO:
+ fixed_io = &ares->data.fixed_io;
+ acpi_dev_get_ioresource(res, fixed_io->address,
+ fixed_io->address_length,
+ ACPI_DECODE_10);
+ break;
+ default:
+ return false;
+ }
+ return true;
+}
+EXPORT_SYMBOL_GPL(acpi_dev_resource_io);
+
+/**
+ * acpi_dev_resource_address_space - Extract ACPI address space information.
+ * @ares: Input ACPI resource object.
+ * @res: Output generic resource object.
+ *
+ * Check if the given ACPI resource object represents an address space resource
+ * and if that's the case, use the information in it to populate the generic
+ * resource object pointed to by @res.
+ */
+bool acpi_dev_resource_address_space(struct acpi_resource *ares,
+ struct resource *res)
+{
+ acpi_status status;
+ struct acpi_resource_address64 addr;
+ bool window;
+ u64 len;
+ u8 io_decode;
+
+ switch (ares->type) {
+ case ACPI_RESOURCE_TYPE_ADDRESS16:
+ case ACPI_RESOURCE_TYPE_ADDRESS32:
+ case ACPI_RESOURCE_TYPE_ADDRESS64:
+ break;
+ default:
+ return false;
+ }
+
+ status = acpi_resource_to_address64(ares, &addr);
+ if (ACPI_FAILURE(status))
+ return true;
+
+ res->start = addr.minimum;
+ res->end = addr.maximum;
+ window = addr.producer_consumer == ACPI_PRODUCER;
+
+ switch(addr.resource_type) {
+ case ACPI_MEMORY_RANGE:
+ len = addr.maximum - addr.minimum + 1;
+ res->flags = acpi_dev_memresource_flags(len,
+ addr.info.mem.write_protect,
+ window);
+ break;
+ case ACPI_IO_RANGE:
+ io_decode = addr.granularity == 0xfff ?
+ ACPI_DECODE_10 : ACPI_DECODE_16;
+ res->flags = acpi_dev_ioresource_flags(addr.minimum,
+ addr.maximum,
+ io_decode, window);
+ break;
+ case ACPI_BUS_NUMBER_RANGE:
+ res->flags = IORESOURCE_BUS;
+ break;
+ default:
+ res->flags = 0;
+ }
+
+ return true;
+}
+EXPORT_SYMBOL_GPL(acpi_dev_resource_address_space);
+
+/**
+ * acpi_dev_resource_ext_address_space - Extract ACPI address space information.
+ * @ares: Input ACPI resource object.
+ * @res: Output generic resource object.
+ *
+ * Check if the given ACPI resource object represents an extended address space
+ * resource and if that's the case, use the information in it to populate the
+ * generic resource object pointed to by @res.
+ */
+bool acpi_dev_resource_ext_address_space(struct acpi_resource *ares,
+ struct resource *res)
+{
+ struct acpi_resource_extended_address64 *ext_addr;
+ bool window;
+ u64 len;
+ u8 io_decode;
+
+ if (ares->type != ACPI_RESOURCE_TYPE_EXTENDED_ADDRESS64)
+ return false;
+
+ ext_addr = &ares->data.ext_address64;
+
+ res->start = ext_addr->minimum;
+ res->end = ext_addr->maximum;
+ window = ext_addr->producer_consumer == ACPI_PRODUCER;
+
+ switch(ext_addr->resource_type) {
+ case ACPI_MEMORY_RANGE:
+ len = ext_addr->maximum - ext_addr->minimum + 1;
+ res->flags = acpi_dev_memresource_flags(len,
+ ext_addr->info.mem.write_protect,
+ window);
+ break;
+ case ACPI_IO_RANGE:
+ io_decode = ext_addr->granularity == 0xfff ?
+ ACPI_DECODE_10 : ACPI_DECODE_16;
+ res->flags = acpi_dev_ioresource_flags(ext_addr->minimum,
+ ext_addr->maximum,
+ io_decode, window);
+ break;
+ case ACPI_BUS_NUMBER_RANGE:
+ res->flags = IORESOURCE_BUS;
+ break;
+ default:
+ res->flags = 0;
+ }
+
+ return true;
+}
+EXPORT_SYMBOL_GPL(acpi_dev_resource_ext_address_space);
+
+/**
+ * acpi_dev_irq_flags - Determine IRQ resource flags.
+ * @triggering: Triggering type as provided by ACPI.
+ * @polarity: Interrupt polarity as provided by ACPI.
+ * @shareable: Whether or not the interrupt is shareable.
+ */
+unsigned long acpi_dev_irq_flags(u8 triggering, u8 polarity, u8 shareable)
+{
+ unsigned long flags;
+
+ if (triggering == ACPI_LEVEL_SENSITIVE)
+ flags = polarity == ACPI_ACTIVE_LOW ?
+ IORESOURCE_IRQ_LOWLEVEL : IORESOURCE_IRQ_HIGHLEVEL;
+ else
+ flags = polarity == ACPI_ACTIVE_LOW ?
+ IORESOURCE_IRQ_LOWEDGE : IORESOURCE_IRQ_HIGHEDGE;
+
+ if (shareable == ACPI_SHARED)
+ flags |= IORESOURCE_IRQ_SHAREABLE;
+
+ return flags | IORESOURCE_IRQ;
+}
+EXPORT_SYMBOL_GPL(acpi_dev_irq_flags);
+
+static void acpi_dev_irqresource_disabled(struct resource *res, u32 gsi)
+{
+ res->start = gsi;
+ res->end = gsi;
+ res->flags = IORESOURCE_IRQ | IORESOURCE_DISABLED;
+}
+
+static void acpi_dev_get_irqresource(struct resource *res, u32 gsi,
+ u8 triggering, u8 polarity, u8 shareable)
+{
+ int irq, p, t;
+
+ if (!valid_IRQ(gsi)) {
+ acpi_dev_irqresource_disabled(res, gsi);
+ return;
+ }
+
+ /*
+ * In IO-APIC mode, use overrided attribute. Two reasons:
+ * 1. BIOS bug in DSDT
+ * 2. BIOS uses IO-APIC mode Interrupt Source Override
+ */
+ if (!acpi_get_override_irq(gsi, &t, &p)) {
+ u8 trig = t ? ACPI_LEVEL_SENSITIVE : ACPI_EDGE_SENSITIVE;
+ u8 pol = p ? ACPI_ACTIVE_LOW : ACPI_ACTIVE_HIGH;
+
+ if (triggering != trig || polarity != pol) {
+ pr_warning("ACPI: IRQ %d override to %s, %s\n", gsi,
+ t ? "edge" : "level", p ? "low" : "high");
+ triggering = trig;
+ polarity = pol;
+ }
+ }
+
+ res->flags = acpi_dev_irq_flags(triggering, polarity, shareable);
+ irq = acpi_register_gsi(NULL, gsi, triggering, polarity);
+ if (irq >= 0) {
+ res->start = irq;
+ res->end = irq;
+ } else {
+ acpi_dev_irqresource_disabled(res, gsi);
+ }
+}
+
+/**
+ * acpi_dev_resource_interrupt - Extract ACPI interrupt resource information.
+ * @ares: Input ACPI resource object.
+ * @index: Index into the array of GSIs represented by the resource.
+ * @res: Output generic resource object.
+ *
+ * Check if the given ACPI resource object represents an interrupt resource
+ * and @index does not exceed the resource's interrupt count (true is returned
+ * in that case regardless of the results of the other checks)). If that's the
+ * case, register the GSI corresponding to @index from the array of interrupts
+ * represented by the resource and populate the generic resource object pointed
+ * to by @res accordingly. If the registration of the GSI is not successful,
+ * IORESOURCE_DISABLED will be set it that object's flags.
+ */
+bool acpi_dev_resource_interrupt(struct acpi_resource *ares, int index,
+ struct resource *res)
+{
+ struct acpi_resource_irq *irq;
+ struct acpi_resource_extended_irq *ext_irq;
+
+ switch (ares->type) {
+ case ACPI_RESOURCE_TYPE_IRQ:
+ /*
+ * Per spec, only one interrupt per descriptor is allowed in
+ * _CRS, but some firmware violates this, so parse them all.
+ */
+ irq = &ares->data.irq;
+ if (index >= irq->interrupt_count) {
+ acpi_dev_irqresource_disabled(res, 0);
+ return false;
+ }
+ acpi_dev_get_irqresource(res, irq->interrupts[index],
+ irq->triggering, irq->polarity,
+ irq->sharable);
+ break;
+ case ACPI_RESOURCE_TYPE_EXTENDED_IRQ:
+ ext_irq = &ares->data.extended_irq;
+ if (index >= ext_irq->interrupt_count) {
+ acpi_dev_irqresource_disabled(res, 0);
+ return false;
+ }
+ acpi_dev_get_irqresource(res, ext_irq->interrupts[index],
+ ext_irq->triggering, ext_irq->polarity,
+ ext_irq->sharable);
+ break;
+ default:
+ return false;
+ }
+
+ return true;
+}
+EXPORT_SYMBOL_GPL(acpi_dev_resource_interrupt);
+
+/**
+ * acpi_dev_free_resource_list - Free resource from %acpi_dev_get_resources().
+ * @list: The head of the resource list to free.
+ */
+void acpi_dev_free_resource_list(struct list_head *list)
+{
+ struct resource_list_entry *rentry, *re;
+
+ list_for_each_entry_safe(rentry, re, list, node) {
+ list_del(&rentry->node);
+ kfree(rentry);
+ }
+}
+EXPORT_SYMBOL_GPL(acpi_dev_free_resource_list);
+
+struct res_proc_context {
+ struct list_head *list;
+ int (*preproc)(struct acpi_resource *, void *);
+ void *preproc_data;
+ int count;
+ int error;
+};
+
+static acpi_status acpi_dev_new_resource_entry(struct resource *r,
+ struct res_proc_context *c)
+{
+ struct resource_list_entry *rentry;
+
+ rentry = kmalloc(sizeof(*rentry), GFP_KERNEL);
+ if (!rentry) {
+ c->error = -ENOMEM;
+ return AE_NO_MEMORY;
+ }
+ rentry->res = *r;
+ list_add_tail(&rentry->node, c->list);
+ c->count++;
+ return AE_OK;
+}
+
+static acpi_status acpi_dev_process_resource(struct acpi_resource *ares,
+ void *context)
+{
+ struct res_proc_context *c = context;
+ struct resource r;
+ int i;
+
+ if (c->preproc) {
+ int ret;
+
+ ret = c->preproc(ares, c->preproc_data);
+ if (ret < 0) {
+ c->error = ret;
+ return AE_CTRL_TERMINATE;
+ } else if (ret > 0) {
+ return AE_OK;
+ }
+ }
+
+ memset(&r, 0, sizeof(r));
+
+ if (acpi_dev_resource_memory(ares, &r)
+ || acpi_dev_resource_io(ares, &r)
+ || acpi_dev_resource_address_space(ares, &r)
+ || acpi_dev_resource_ext_address_space(ares, &r))
+ return acpi_dev_new_resource_entry(&r, c);
+
+ for (i = 0; acpi_dev_resource_interrupt(ares, i, &r); i++) {
+ acpi_status status;
+
+ status = acpi_dev_new_resource_entry(&r, c);
+ if (ACPI_FAILURE(status))
+ return status;
+ }
+
+ return AE_OK;
+}
+
+/**
+ * acpi_dev_get_resources - Get current resources of a device.
+ * @adev: ACPI device node to get the resources for.
+ * @list: Head of the resultant list of resources (must be empty).
+ * @preproc: The caller's preprocessing routine.
+ * @preproc_data: Pointer passed to the caller's preprocessing routine.
+ *
+ * Evaluate the _CRS method for the given device node and process its output by
+ * (1) executing the @preproc() rountine provided by the caller, passing the
+ * resource pointer and @preproc_data to it as arguments, for each ACPI resource
+ * returned and (2) converting all of the returned ACPI resources into struct
+ * resource objects if possible. If the return value of @preproc() in step (1)
+ * is different from 0, step (2) is not applied to the given ACPI resource and
+ * if that value is negative, the whole processing is aborted and that value is
+ * returned as the final error code.
+ *
+ * The resultant struct resource objects are put on the list pointed to by
+ * @list, that must be empty initially, as members of struct resource_list_entry
+ * objects. Callers of this routine should use %acpi_dev_free_resource_list() to
+ * free that list.
+ *
+ * The number of resources in the output list is returned on success, an error
+ * code reflecting the error condition is returned otherwise.
+ */
+int acpi_dev_get_resources(struct acpi_device *adev, struct list_head *list,
+ int (*preproc)(struct acpi_resource *, void *),
+ void *preproc_data)
+{
+ struct res_proc_context c;
+ acpi_handle not_used;
+ acpi_status status;
+
+ if (!adev || !adev->handle || !list_empty(list))
+ return -EINVAL;
+
+ status = acpi_get_handle(adev->handle, METHOD_NAME__CRS, ¬_used);
+ if (ACPI_FAILURE(status))
+ return 0;
+
+ c.list = list;
+ c.preproc = preproc;
+ c.preproc_data = preproc_data;
+ c.count = 0;
+ c.error = 0;
+ status = acpi_walk_resources(adev->handle, METHOD_NAME__CRS,
+ acpi_dev_process_resource, &c);
+ if (ACPI_FAILURE(status)) {
+ acpi_dev_free_resource_list(list);
+ return c.error ? c.error : -EIO;
+ }
+
+ return c.count;
+}
+EXPORT_SYMBOL_GPL(acpi_dev_get_resources);
diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index 1fcb867..53502d1 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -29,6 +29,27 @@
static const char *dummy_hid = "device";
+/*
+ * The following ACPI IDs are known to be suitable for representing as
+ * platform devices.
+ */
+static const struct acpi_device_id acpi_platform_device_ids[] = {
+
+ { "PNP0D40" },
+
+ /* Haswell LPSS devices */
+ { "INT33C0", 0 },
+ { "INT33C1", 0 },
+ { "INT33C2", 0 },
+ { "INT33C3", 0 },
+ { "INT33C4", 0 },
+ { "INT33C5", 0 },
+ { "INT33C6", 0 },
+ { "INT33C7", 0 },
+
+ { }
+};
+
static LIST_HEAD(acpi_device_list);
static LIST_HEAD(acpi_bus_id_list);
DEFINE_MUTEX(acpi_device_lock);
@@ -97,6 +118,7 @@
struct acpi_eject_event *ej_event = (struct acpi_eject_event *) context;
struct acpi_device *device;
acpi_handle handle = ej_event->handle;
+ acpi_handle temp;
struct acpi_object_list arg_list;
union acpi_object arg;
acpi_status status = AE_OK;
@@ -117,13 +139,16 @@
goto err_out;
}
+ /* device has been freed */
+ device = NULL;
+
/* power off device */
status = acpi_evaluate_object(handle, "_PS3", NULL, NULL);
if (ACPI_FAILURE(status) && status != AE_NOT_FOUND)
printk(KERN_WARNING PREFIX
"Power-off device failed\n");
- if (device->flags.lockable) {
+ if (ACPI_SUCCESS(acpi_get_handle(handle, "_LCK", &temp))) {
arg_list.count = 1;
arg_list.pointer = &arg;
arg.type = ACPI_TYPE_INTEGER;
@@ -157,6 +182,7 @@
kfree(context);
return;
}
+EXPORT_SYMBOL(acpi_bus_hot_remove_device);
static ssize_t
acpi_eject_store(struct device *d, struct device_attribute *attr,
@@ -216,6 +242,25 @@
}
static DEVICE_ATTR(hid, 0444, acpi_device_hid_show, NULL);
+static ssize_t acpi_device_uid_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct acpi_device *acpi_dev = to_acpi_device(dev);
+
+ return sprintf(buf, "%s\n", acpi_dev->pnp.unique_id);
+}
+static DEVICE_ATTR(uid, 0444, acpi_device_uid_show, NULL);
+
+static ssize_t acpi_device_adr_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct acpi_device *acpi_dev = to_acpi_device(dev);
+
+ return sprintf(buf, "0x%08x\n",
+ (unsigned int)(acpi_dev->pnp.bus_address));
+}
+static DEVICE_ATTR(adr, 0444, acpi_device_adr_show, NULL);
+
static ssize_t
acpi_device_path_show(struct device *dev, struct device_attribute *attr, char *buf) {
struct acpi_device *acpi_dev = to_acpi_device(dev);
@@ -259,11 +304,21 @@
}
static DEVICE_ATTR(description, 0444, description_show, NULL);
+static ssize_t
+acpi_device_sun_show(struct device *dev, struct device_attribute *attr,
+ char *buf) {
+ struct acpi_device *acpi_dev = to_acpi_device(dev);
+
+ return sprintf(buf, "%lu\n", acpi_dev->pnp.sun);
+}
+static DEVICE_ATTR(sun, 0444, acpi_device_sun_show, NULL);
+
static int acpi_device_setup_files(struct acpi_device *dev)
{
struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL};
acpi_status status;
acpi_handle temp;
+ unsigned long long sun;
int result = 0;
/*
@@ -300,6 +355,21 @@
goto end;
}
+ if (dev->flags.bus_address)
+ result = device_create_file(&dev->dev, &dev_attr_adr);
+ if (dev->pnp.unique_id)
+ result = device_create_file(&dev->dev, &dev_attr_uid);
+
+ status = acpi_evaluate_integer(dev->handle, "_SUN", NULL, &sun);
+ if (ACPI_SUCCESS(status)) {
+ dev->pnp.sun = (unsigned long)sun;
+ result = device_create_file(&dev->dev, &dev_attr_sun);
+ if (result)
+ goto end;
+ } else {
+ dev->pnp.sun = (unsigned long)-1;
+ }
+
/*
* If device has _EJ0, 'eject' file is created that is used to trigger
* hot-removal function from userland.
@@ -331,6 +401,14 @@
if (ACPI_SUCCESS(status))
device_remove_file(&dev->dev, &dev_attr_eject);
+ status = acpi_get_handle(dev->handle, "_SUN", &temp);
+ if (ACPI_SUCCESS(status))
+ device_remove_file(&dev->dev, &dev_attr_sun);
+
+ if (dev->pnp.unique_id)
+ device_remove_file(&dev->dev, &dev_attr_uid);
+ if (dev->flags.bus_address)
+ device_remove_file(&dev->dev, &dev_attr_adr);
device_remove_file(&dev->dev, &dev_attr_modalias);
device_remove_file(&dev->dev, &dev_attr_hid);
if (dev->handle)
@@ -340,8 +418,8 @@
ACPI Bus operations
-------------------------------------------------------------------------- */
-int acpi_match_device_ids(struct acpi_device *device,
- const struct acpi_device_id *ids)
+static const struct acpi_device_id *__acpi_match_device(
+ struct acpi_device *device, const struct acpi_device_id *ids)
{
const struct acpi_device_id *id;
struct acpi_hardware_id *hwid;
@@ -351,14 +429,44 @@
* driver for it.
*/
if (!device->status.present)
- return -ENODEV;
+ return NULL;
for (id = ids; id->id[0]; id++)
list_for_each_entry(hwid, &device->pnp.ids, list)
if (!strcmp((char *) id->id, hwid->id))
- return 0;
+ return id;
- return -ENOENT;
+ return NULL;
+}
+
+/**
+ * acpi_match_device - Match a struct device against a given list of ACPI IDs
+ * @ids: Array of struct acpi_device_id object to match against.
+ * @dev: The device structure to match.
+ *
+ * Check if @dev has a valid ACPI handle and if there is a struct acpi_device
+ * object for that handle and use that object to match against a given list of
+ * device IDs.
+ *
+ * Return a pointer to the first matching ID on success or %NULL on failure.
+ */
+const struct acpi_device_id *acpi_match_device(const struct acpi_device_id *ids,
+ const struct device *dev)
+{
+ struct acpi_device *adev;
+
+ if (!ids || !ACPI_HANDLE(dev)
+ || ACPI_FAILURE(acpi_bus_get_device(ACPI_HANDLE(dev), &adev)))
+ return NULL;
+
+ return __acpi_match_device(adev, ids);
+}
+EXPORT_SYMBOL_GPL(acpi_match_device);
+
+int acpi_match_device_ids(struct acpi_device *device,
+ const struct acpi_device_id *ids)
+{
+ return __acpi_match_device(device, ids) ? 0 : -ENOENT;
}
EXPORT_SYMBOL(acpi_match_device_ids);
@@ -377,6 +485,7 @@
struct acpi_device *acpi_dev = to_acpi_device(dev);
acpi_free_ids(acpi_dev);
+ kfree(acpi_dev->pnp.unique_id);
kfree(acpi_dev);
}
@@ -859,8 +968,8 @@
static void acpi_bus_set_run_wake_flags(struct acpi_device *device)
{
struct acpi_device_id button_device_ids[] = {
- {"PNP0C0D", 0},
{"PNP0C0C", 0},
+ {"PNP0C0D", 0},
{"PNP0C0E", 0},
{"", 0},
};
@@ -872,6 +981,11 @@
/* Power button, Lid switch always enable wakeup */
if (!acpi_match_device_ids(device, button_device_ids)) {
device->wakeup.flags.run_wake = 1;
+ if (!acpi_match_device_ids(device, &button_device_ids[1])) {
+ /* Do not use Lid/sleep button for S5 wakeup */
+ if (device->wakeup.sleep_state == ACPI_STATE_S5)
+ device->wakeup.sleep_state = ACPI_STATE_S4;
+ }
device_set_wakeup_capable(&device->dev, true);
return;
}
@@ -965,8 +1079,10 @@
* D3hot is only valid if _PR3 present.
*/
if (ps->resources.count ||
- (ps->flags.explicit_set && i < ACPI_STATE_D3_HOT))
+ (ps->flags.explicit_set && i < ACPI_STATE_D3_HOT)) {
ps->flags.valid = 1;
+ ps->flags.os_accessible = 1;
+ }
ps->power = -1; /* Unknown - driver assigned */
ps->latency = -1; /* Unknown - driver assigned */
@@ -982,6 +1098,11 @@
if (device->power.states[ACPI_STATE_D3_HOT].flags.explicit_set)
device->power.states[ACPI_STATE_D3_COLD].flags.explicit_set = 1;
+ /* Presence of _PS3 or _PRx means we can put the device into D3 cold */
+ if (device->power.states[ACPI_STATE_D3_HOT].flags.explicit_set ||
+ device->power.flags.power_resources)
+ device->power.states[ACPI_STATE_D3_COLD].flags.os_accessible = 1;
+
acpi_bus_init_power(device);
return 0;
@@ -1013,11 +1134,6 @@
device->flags.ejectable = 1;
}
- /* Presence of _LCK indicates 'lockable' */
- status = acpi_get_handle(device->handle, "_LCK", &temp);
- if (ACPI_SUCCESS(status))
- device->flags.lockable = 1;
-
/* Power resources cannot be power manageable. */
if (device->device_type == ACPI_BUS_TYPE_POWER)
return 0;
@@ -1185,7 +1301,7 @@
{
acpi_status status;
struct acpi_device_info *info;
- struct acpica_device_id_list *cid_list;
+ struct acpi_pnp_device_id_list *cid_list;
int i;
switch (device->device_type) {
@@ -1212,6 +1328,9 @@
device->pnp.bus_address = info->address;
device->flags.bus_address = 1;
}
+ if (info->valid & ACPI_VALID_UID)
+ device->pnp.unique_id = kstrdup(info->unique_id.string,
+ GFP_KERNEL);
kfree(info);
@@ -1483,8 +1602,13 @@
*/
device = NULL;
acpi_bus_get_device(handle, &device);
- if (ops->acpi_op_add && !device)
+ if (ops->acpi_op_add && !device) {
acpi_add_single_object(&device, handle, type, sta, ops);
+ /* Is the device a known good platform device? */
+ if (device
+ && !acpi_match_device_ids(device, acpi_platform_device_ids))
+ acpi_create_platform_device(device);
+ }
if (!device)
return AE_CTRL_DEPTH;
diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c
index fdcdbb6..2fcc67d 100644
--- a/drivers/acpi/sleep.c
+++ b/drivers/acpi/sleep.c
@@ -18,7 +18,6 @@
#include <linux/reboot.h>
#include <linux/acpi.h>
#include <linux/module.h>
-#include <linux/pm_runtime.h>
#include <asm/io.h>
@@ -81,6 +80,12 @@
#ifdef CONFIG_ACPI_SLEEP
static u32 acpi_target_sleep_state = ACPI_STATE_S0;
+
+u32 acpi_target_system_state(void)
+{
+ return acpi_target_sleep_state;
+}
+
static bool pwr_btn_event_pending;
/*
@@ -98,6 +103,21 @@
}
/*
+ * The ACPI specification wants us to save NVS memory regions during hibernation
+ * but says nothing about saving NVS during S3. Not all versions of Windows
+ * save NVS on S3 suspend either, and it is clear that not all systems need
+ * NVS to be saved at S3 time. To improve suspend/resume time, allow the
+ * user to disable saving NVS on S3 if their system does not require it, but
+ * continue to save/restore NVS for S4 as specified.
+ */
+static bool nvs_nosave_s3;
+
+void __init acpi_nvs_nosave_s3(void)
+{
+ nvs_nosave_s3 = true;
+}
+
+/*
* ACPI 1.0 wants us to execute _PTS before suspending devices, so we allow the
* user to request that behavior by using the 'acpi_old_suspend_ordering'
* kernel command line option that causes the following variable to be set.
@@ -109,6 +129,180 @@
old_suspend_ordering = true;
}
+static int __init init_old_suspend_ordering(const struct dmi_system_id *d)
+{
+ acpi_old_suspend_ordering();
+ return 0;
+}
+
+static int __init init_nvs_nosave(const struct dmi_system_id *d)
+{
+ acpi_nvs_nosave();
+ return 0;
+}
+
+static struct dmi_system_id __initdata acpisleep_dmi_table[] = {
+ {
+ .callback = init_old_suspend_ordering,
+ .ident = "Abit KN9 (nForce4 variant)",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "http://www.abit.com.tw/"),
+ DMI_MATCH(DMI_BOARD_NAME, "KN9 Series(NF-CK804)"),
+ },
+ },
+ {
+ .callback = init_old_suspend_ordering,
+ .ident = "HP xw4600 Workstation",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "HP xw4600 Workstation"),
+ },
+ },
+ {
+ .callback = init_old_suspend_ordering,
+ .ident = "Asus Pundit P1-AH2 (M2N8L motherboard)",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTek Computer INC."),
+ DMI_MATCH(DMI_BOARD_NAME, "M2N8L"),
+ },
+ },
+ {
+ .callback = init_old_suspend_ordering,
+ .ident = "Panasonic CF51-2L",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR,
+ "Matsushita Electric Industrial Co.,Ltd."),
+ DMI_MATCH(DMI_BOARD_NAME, "CF51-2L"),
+ },
+ },
+ {
+ .callback = init_nvs_nosave,
+ .ident = "Sony Vaio VGN-FW21E",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FW21E"),
+ },
+ },
+ {
+ .callback = init_nvs_nosave,
+ .ident = "Sony Vaio VPCEB17FX",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "VPCEB17FX"),
+ },
+ },
+ {
+ .callback = init_nvs_nosave,
+ .ident = "Sony Vaio VGN-SR11M",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SR11M"),
+ },
+ },
+ {
+ .callback = init_nvs_nosave,
+ .ident = "Everex StepNote Series",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Everex Systems, Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Everex StepNote Series"),
+ },
+ },
+ {
+ .callback = init_nvs_nosave,
+ .ident = "Sony Vaio VPCEB1Z1E",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "VPCEB1Z1E"),
+ },
+ },
+ {
+ .callback = init_nvs_nosave,
+ .ident = "Sony Vaio VGN-NW130D",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "VGN-NW130D"),
+ },
+ },
+ {
+ .callback = init_nvs_nosave,
+ .ident = "Sony Vaio VPCCW29FX",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "VPCCW29FX"),
+ },
+ },
+ {
+ .callback = init_nvs_nosave,
+ .ident = "Averatec AV1020-ED2",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "AVERATEC"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "1000 Series"),
+ },
+ },
+ {
+ .callback = init_old_suspend_ordering,
+ .ident = "Asus A8N-SLI DELUXE",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+ DMI_MATCH(DMI_BOARD_NAME, "A8N-SLI DELUXE"),
+ },
+ },
+ {
+ .callback = init_old_suspend_ordering,
+ .ident = "Asus A8N-SLI Premium",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+ DMI_MATCH(DMI_BOARD_NAME, "A8N-SLI Premium"),
+ },
+ },
+ {
+ .callback = init_nvs_nosave,
+ .ident = "Sony Vaio VGN-SR26GN_P",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SR26GN_P"),
+ },
+ },
+ {
+ .callback = init_nvs_nosave,
+ .ident = "Sony Vaio VPCEB1S1E",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "VPCEB1S1E"),
+ },
+ },
+ {
+ .callback = init_nvs_nosave,
+ .ident = "Sony Vaio VGN-FW520F",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FW520F"),
+ },
+ },
+ {
+ .callback = init_nvs_nosave,
+ .ident = "Asus K54C",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "K54C"),
+ },
+ },
+ {
+ .callback = init_nvs_nosave,
+ .ident = "Asus K54HR",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "K54HR"),
+ },
+ },
+ {},
+};
+
+static void acpi_sleep_dmi_check(void)
+{
+ dmi_check_system(acpisleep_dmi_table);
+}
+
/**
* acpi_pm_freeze - Disable the GPEs and suspend EC transactions.
*/
@@ -224,6 +418,7 @@
}
#else /* !CONFIG_ACPI_SLEEP */
#define acpi_target_sleep_state ACPI_STATE_S0
+static inline void acpi_sleep_dmi_check(void) {}
#endif /* CONFIG_ACPI_SLEEP */
#ifdef CONFIG_SUSPEND
@@ -243,7 +438,7 @@
u32 acpi_state = acpi_suspend_states[pm_state];
int error = 0;
- error = nvs_nosave ? 0 : suspend_nvs_alloc();
+ error = (nvs_nosave || nvs_nosave_s3) ? 0 : suspend_nvs_alloc();
if (error)
return error;
@@ -382,167 +577,6 @@
.end = acpi_pm_end,
.recover = acpi_pm_finish,
};
-
-static int __init init_old_suspend_ordering(const struct dmi_system_id *d)
-{
- old_suspend_ordering = true;
- return 0;
-}
-
-static int __init init_nvs_nosave(const struct dmi_system_id *d)
-{
- acpi_nvs_nosave();
- return 0;
-}
-
-static struct dmi_system_id __initdata acpisleep_dmi_table[] = {
- {
- .callback = init_old_suspend_ordering,
- .ident = "Abit KN9 (nForce4 variant)",
- .matches = {
- DMI_MATCH(DMI_BOARD_VENDOR, "http://www.abit.com.tw/"),
- DMI_MATCH(DMI_BOARD_NAME, "KN9 Series(NF-CK804)"),
- },
- },
- {
- .callback = init_old_suspend_ordering,
- .ident = "HP xw4600 Workstation",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
- DMI_MATCH(DMI_PRODUCT_NAME, "HP xw4600 Workstation"),
- },
- },
- {
- .callback = init_old_suspend_ordering,
- .ident = "Asus Pundit P1-AH2 (M2N8L motherboard)",
- .matches = {
- DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTek Computer INC."),
- DMI_MATCH(DMI_BOARD_NAME, "M2N8L"),
- },
- },
- {
- .callback = init_old_suspend_ordering,
- .ident = "Panasonic CF51-2L",
- .matches = {
- DMI_MATCH(DMI_BOARD_VENDOR,
- "Matsushita Electric Industrial Co.,Ltd."),
- DMI_MATCH(DMI_BOARD_NAME, "CF51-2L"),
- },
- },
- {
- .callback = init_nvs_nosave,
- .ident = "Sony Vaio VGN-FW21E",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
- DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FW21E"),
- },
- },
- {
- .callback = init_nvs_nosave,
- .ident = "Sony Vaio VPCEB17FX",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
- DMI_MATCH(DMI_PRODUCT_NAME, "VPCEB17FX"),
- },
- },
- {
- .callback = init_nvs_nosave,
- .ident = "Sony Vaio VGN-SR11M",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
- DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SR11M"),
- },
- },
- {
- .callback = init_nvs_nosave,
- .ident = "Everex StepNote Series",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Everex Systems, Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "Everex StepNote Series"),
- },
- },
- {
- .callback = init_nvs_nosave,
- .ident = "Sony Vaio VPCEB1Z1E",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
- DMI_MATCH(DMI_PRODUCT_NAME, "VPCEB1Z1E"),
- },
- },
- {
- .callback = init_nvs_nosave,
- .ident = "Sony Vaio VGN-NW130D",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
- DMI_MATCH(DMI_PRODUCT_NAME, "VGN-NW130D"),
- },
- },
- {
- .callback = init_nvs_nosave,
- .ident = "Sony Vaio VPCCW29FX",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
- DMI_MATCH(DMI_PRODUCT_NAME, "VPCCW29FX"),
- },
- },
- {
- .callback = init_nvs_nosave,
- .ident = "Averatec AV1020-ED2",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "AVERATEC"),
- DMI_MATCH(DMI_PRODUCT_NAME, "1000 Series"),
- },
- },
- {
- .callback = init_old_suspend_ordering,
- .ident = "Asus A8N-SLI DELUXE",
- .matches = {
- DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
- DMI_MATCH(DMI_BOARD_NAME, "A8N-SLI DELUXE"),
- },
- },
- {
- .callback = init_old_suspend_ordering,
- .ident = "Asus A8N-SLI Premium",
- .matches = {
- DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
- DMI_MATCH(DMI_BOARD_NAME, "A8N-SLI Premium"),
- },
- },
- {
- .callback = init_nvs_nosave,
- .ident = "Sony Vaio VGN-SR26GN_P",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
- DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SR26GN_P"),
- },
- },
- {
- .callback = init_nvs_nosave,
- .ident = "Sony Vaio VGN-FW520F",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
- DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FW520F"),
- },
- },
- {
- .callback = init_nvs_nosave,
- .ident = "Asus K54C",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "K54C"),
- },
- },
- {
- .callback = init_nvs_nosave,
- .ident = "Asus K54HR",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "K54HR"),
- },
- },
- {},
-};
#endif /* CONFIG_SUSPEND */
#ifdef CONFIG_HIBERNATION
@@ -681,177 +715,6 @@
return -EINVAL;
}
-#ifdef CONFIG_PM
-/**
- * acpi_pm_device_sleep_state - return preferred power state of ACPI device
- * in the system sleep state given by %acpi_target_sleep_state
- * @dev: device to examine; its driver model wakeup flags control
- * whether it should be able to wake up the system
- * @d_min_p: used to store the upper limit of allowed states range
- * @d_max_in: specify the lowest allowed states
- * Return value: preferred power state of the device on success, -ENODEV
- * (ie. if there's no 'struct acpi_device' for @dev) or -EINVAL on failure
- *
- * Find the lowest power (highest number) ACPI device power state that
- * device @dev can be in while the system is in the sleep state represented
- * by %acpi_target_sleep_state. If @wake is nonzero, the device should be
- * able to wake up the system from this sleep state. If @d_min_p is set,
- * the highest power (lowest number) device power state of @dev allowed
- * in this system sleep state is stored at the location pointed to by it.
- *
- * The caller must ensure that @dev is valid before using this function.
- * The caller is also responsible for figuring out if the device is
- * supposed to be able to wake up the system and passing this information
- * via @wake.
- */
-
-int acpi_pm_device_sleep_state(struct device *dev, int *d_min_p, int d_max_in)
-{
- acpi_handle handle = DEVICE_ACPI_HANDLE(dev);
- struct acpi_device *adev;
- char acpi_method[] = "_SxD";
- unsigned long long d_min, d_max;
-
- if (d_max_in < ACPI_STATE_D0 || d_max_in > ACPI_STATE_D3)
- return -EINVAL;
- if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &adev))) {
- printk(KERN_DEBUG "ACPI handle has no context!\n");
- return -ENODEV;
- }
-
- acpi_method[2] = '0' + acpi_target_sleep_state;
- /*
- * If the sleep state is S0, the lowest limit from ACPI is D3,
- * but if the device has _S0W, we will use the value from _S0W
- * as the lowest limit from ACPI. Finally, we will constrain
- * the lowest limit with the specified one.
- */
- d_min = ACPI_STATE_D0;
- d_max = ACPI_STATE_D3;
-
- /*
- * If present, _SxD methods return the minimum D-state (highest power
- * state) we can use for the corresponding S-states. Otherwise, the
- * minimum D-state is D0 (ACPI 3.x).
- *
- * NOTE: We rely on acpi_evaluate_integer() not clobbering the integer
- * provided -- that's our fault recovery, we ignore retval.
- */
- if (acpi_target_sleep_state > ACPI_STATE_S0)
- acpi_evaluate_integer(handle, acpi_method, NULL, &d_min);
-
- /*
- * If _PRW says we can wake up the system from the target sleep state,
- * the D-state returned by _SxD is sufficient for that (we assume a
- * wakeup-aware driver if wake is set). Still, if _SxW exists
- * (ACPI 3.x), it should return the maximum (lowest power) D-state that
- * can wake the system. _S0W may be valid, too.
- */
- if (acpi_target_sleep_state == ACPI_STATE_S0 ||
- (device_may_wakeup(dev) && adev->wakeup.flags.valid &&
- adev->wakeup.sleep_state >= acpi_target_sleep_state)) {
- acpi_status status;
-
- acpi_method[3] = 'W';
- status = acpi_evaluate_integer(handle, acpi_method, NULL,
- &d_max);
- if (ACPI_FAILURE(status)) {
- if (acpi_target_sleep_state != ACPI_STATE_S0 ||
- status != AE_NOT_FOUND)
- d_max = d_min;
- } else if (d_max < d_min) {
- /* Warn the user of the broken DSDT */
- printk(KERN_WARNING "ACPI: Wrong value from %s\n",
- acpi_method);
- /* Sanitize it */
- d_min = d_max;
- }
- }
-
- if (d_max_in < d_min)
- return -EINVAL;
- if (d_min_p)
- *d_min_p = d_min;
- /* constrain d_max with specified lowest limit (max number) */
- if (d_max > d_max_in) {
- for (d_max = d_max_in; d_max > d_min; d_max--) {
- if (adev->power.states[d_max].flags.valid)
- break;
- }
- }
- return d_max;
-}
-EXPORT_SYMBOL(acpi_pm_device_sleep_state);
-#endif /* CONFIG_PM */
-
-#ifdef CONFIG_PM_SLEEP
-/**
- * acpi_pm_device_run_wake - Enable/disable wake-up for given device.
- * @phys_dev: Device to enable/disable the platform to wake-up the system for.
- * @enable: Whether enable or disable the wake-up functionality.
- *
- * Find the ACPI device object corresponding to @pci_dev and try to
- * enable/disable the GPE associated with it.
- */
-int acpi_pm_device_run_wake(struct device *phys_dev, bool enable)
-{
- struct acpi_device *dev;
- acpi_handle handle;
-
- if (!device_run_wake(phys_dev))
- return -EINVAL;
-
- handle = DEVICE_ACPI_HANDLE(phys_dev);
- if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &dev))) {
- dev_dbg(phys_dev, "ACPI handle has no context in %s!\n",
- __func__);
- return -ENODEV;
- }
-
- if (enable) {
- acpi_enable_wakeup_device_power(dev, ACPI_STATE_S0);
- acpi_enable_gpe(dev->wakeup.gpe_device, dev->wakeup.gpe_number);
- } else {
- acpi_disable_gpe(dev->wakeup.gpe_device, dev->wakeup.gpe_number);
- acpi_disable_wakeup_device_power(dev);
- }
-
- return 0;
-}
-EXPORT_SYMBOL(acpi_pm_device_run_wake);
-
-/**
- * acpi_pm_device_sleep_wake - enable or disable the system wake-up
- * capability of given device
- * @dev: device to handle
- * @enable: 'true' - enable, 'false' - disable the wake-up capability
- */
-int acpi_pm_device_sleep_wake(struct device *dev, bool enable)
-{
- acpi_handle handle;
- struct acpi_device *adev;
- int error;
-
- if (!device_can_wakeup(dev))
- return -EINVAL;
-
- handle = DEVICE_ACPI_HANDLE(dev);
- if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &adev))) {
- dev_dbg(dev, "ACPI handle has no context in %s!\n", __func__);
- return -ENODEV;
- }
-
- error = enable ?
- acpi_enable_wakeup_device_power(adev, acpi_target_sleep_state) :
- acpi_disable_wakeup_device_power(adev);
- if (!error)
- dev_info(dev, "wake-up capability %s by ACPI\n",
- enable ? "enabled" : "disabled");
-
- return error;
-}
-#endif /* CONFIG_PM_SLEEP */
-
static void acpi_power_off_prepare(void)
{
/* Prepare to power off the system */
@@ -873,13 +736,13 @@
u8 type_a, type_b;
#ifdef CONFIG_SUSPEND
int i = 0;
-
- dmi_check_system(acpisleep_dmi_table);
#endif
if (acpi_disabled)
return 0;
+ acpi_sleep_dmi_check();
+
sleep_states[ACPI_STATE_S0] = 1;
printk(KERN_INFO PREFIX "(supports S0");
diff --git a/drivers/acpi/sysfs.c b/drivers/acpi/sysfs.c
index 7c3f98b..ea61ca9 100644
--- a/drivers/acpi/sysfs.c
+++ b/drivers/acpi/sysfs.c
@@ -476,7 +476,7 @@
return;
}
-static void acpi_gbl_event_handler(u32 event_type, acpi_handle device,
+static void acpi_global_event_handler(u32 event_type, acpi_handle device,
u32 event_number, void *context)
{
if (event_type == ACPI_EVENT_TYPE_GPE)
@@ -638,7 +638,7 @@
if (all_counters == NULL)
goto fail;
- status = acpi_install_global_event_handler(acpi_gbl_event_handler, NULL);
+ status = acpi_install_global_event_handler(acpi_global_event_handler, NULL);
if (ACPI_FAILURE(status))
goto fail;
diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c
index 804204d..6e8cc16 100644
--- a/drivers/acpi/thermal.c
+++ b/drivers/acpi/thermal.c
@@ -984,6 +984,38 @@
}
}
+/*
+ * On some platforms, the AML code has dependency about
+ * the evaluating order of _TMP and _CRT/_HOT/_PSV/_ACx.
+ * 1. On HP Pavilion G4-1016tx, _TMP must be invoked after
+ * /_CRT/_HOT/_PSV/_ACx, or else system will be power off.
+ * 2. On HP Compaq 6715b/6715s, the return value of _PSV is 0
+ * if _TMP has never been evaluated.
+ *
+ * As this dependency is totally transparent to OS, evaluate
+ * all of them once, in the order of _CRT/_HOT/_PSV/_ACx,
+ * _TMP, before they are actually used.
+ */
+static void acpi_thermal_aml_dependency_fix(struct acpi_thermal *tz)
+{
+ acpi_handle handle = tz->device->handle;
+ unsigned long long value;
+ int i;
+
+ acpi_evaluate_integer(handle, "_CRT", NULL, &value);
+ acpi_evaluate_integer(handle, "_HOT", NULL, &value);
+ acpi_evaluate_integer(handle, "_PSV", NULL, &value);
+ for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++) {
+ char name[5] = { '_', 'A', 'C', ('0' + i), '\0' };
+ acpi_status status;
+
+ status = acpi_evaluate_integer(handle, name, NULL, &value);
+ if (status == AE_NOT_FOUND)
+ break;
+ }
+ acpi_evaluate_integer(handle, "_TMP", NULL, &value);
+}
+
static int acpi_thermal_get_info(struct acpi_thermal *tz)
{
int result = 0;
@@ -992,6 +1024,8 @@
if (!tz)
return -EINVAL;
+ acpi_thermal_aml_dependency_fix(tz);
+
/* Get trip points [_CRT, _PSV, etc.] (required) */
result = acpi_thermal_get_trip_points(tz);
if (result)
diff --git a/drivers/acpi/utils.c b/drivers/acpi/utils.c
index 462f7e3..74437130 100644
--- a/drivers/acpi/utils.c
+++ b/drivers/acpi/utils.c
@@ -28,6 +28,8 @@
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/types.h>
+#include <linux/hardirq.h>
+#include <linux/acpi.h>
#include <acpi/acpi_bus.h>
#include <acpi/acpi_drivers.h>
@@ -457,3 +459,39 @@
#endif
}
EXPORT_SYMBOL(acpi_evaluate_hotplug_ost);
+
+/**
+ * acpi_handle_printk: Print message with ACPI prefix and object path
+ *
+ * This function is called through acpi_handle_<level> macros and prints
+ * a message with ACPI prefix and object path. This function acquires
+ * the global namespace mutex to obtain an object path. In interrupt
+ * context, it shows the object path as <n/a>.
+ */
+void
+acpi_handle_printk(const char *level, acpi_handle handle, const char *fmt, ...)
+{
+ struct va_format vaf;
+ va_list args;
+ struct acpi_buffer buffer = {
+ .length = ACPI_ALLOCATE_BUFFER,
+ .pointer = NULL
+ };
+ const char *path;
+
+ va_start(args, fmt);
+ vaf.fmt = fmt;
+ vaf.va = &args;
+
+ if (in_interrupt() ||
+ acpi_get_name(handle, ACPI_FULL_PATHNAME, &buffer) != AE_OK)
+ path = "<n/a>";
+ else
+ path = buffer.pointer;
+
+ printk("%sACPI: %s: %pV", level, path, &vaf);
+
+ va_end(args);
+ kfree(buffer.pointer);
+}
+EXPORT_SYMBOL(acpi_handle_printk);
diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
index 0230cb6..ac9a69c 100644
--- a/drivers/acpi/video.c
+++ b/drivers/acpi/video.c
@@ -389,6 +389,12 @@
return 0;
}
+static int video_ignore_initial_backlight(const struct dmi_system_id *d)
+{
+ use_bios_initial_backlight = 0;
+ return 0;
+}
+
static struct dmi_system_id video_dmi_table[] __initdata = {
/*
* Broken _BQC workaround http://bugzilla.kernel.org/show_bug.cgi?id=13121
@@ -433,6 +439,14 @@
DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 7720"),
},
},
+ {
+ .callback = video_ignore_initial_backlight,
+ .ident = "HP Folio 13-2000",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "HP Folio 13 - 2000 Notebook PC"),
+ },
+ },
{}
};
diff --git a/drivers/acpi/video_detect.c b/drivers/acpi/video_detect.c
index b728880..4ac2593 100644
--- a/drivers/acpi/video_detect.c
+++ b/drivers/acpi/video_detect.c
@@ -156,6 +156,14 @@
DMI_MATCH(DMI_BOARD_NAME, "X360"),
},
},
+ {
+ .callback = video_detect_force_vendor,
+ .ident = "Asus UL30VT",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "UL30VT"),
+ },
+ },
{ },
};
diff --git a/drivers/base/Kconfig b/drivers/base/Kconfig
index b34b5cd..c8b4539 100644
--- a/drivers/base/Kconfig
+++ b/drivers/base/Kconfig
@@ -57,7 +57,7 @@
on the rootfs is completely empty.
config STANDALONE
- bool "Select only drivers that don't need compile-time external firmware" if EXPERIMENTAL
+ bool "Select only drivers that don't need compile-time external firmware"
default y
help
Select this option if you don't have magic firmware for drivers that
@@ -185,7 +185,6 @@
bool
default n
select ANON_INODES
- depends on EXPERIMENTAL
help
This option enables the framework for buffer-sharing between
multiple drivers. A buffer is associated with a file using driver
@@ -193,8 +192,8 @@
driver.
config CMA
- bool "Contiguous Memory Allocator (EXPERIMENTAL)"
- depends on HAVE_DMA_CONTIGUOUS && HAVE_MEMBLOCK && EXPERIMENTAL
+ bool "Contiguous Memory Allocator"
+ depends on HAVE_DMA_CONTIGUOUS && HAVE_MEMBLOCK
select MIGRATION
select MEMORY_ISOLATION
help
diff --git a/drivers/base/attribute_container.c b/drivers/base/attribute_container.c
index 8fc200b2..d78b204 100644
--- a/drivers/base/attribute_container.c
+++ b/drivers/base/attribute_container.c
@@ -158,7 +158,7 @@
ic = kzalloc(sizeof(*ic), GFP_KERNEL);
if (!ic) {
- dev_printk(KERN_ERR, dev, "failed to allocate class container\n");
+ dev_err(dev, "failed to allocate class container\n");
continue;
}
diff --git a/drivers/base/bus.c b/drivers/base/bus.c
index 181ed26..24eb078 100644
--- a/drivers/base/bus.c
+++ b/drivers/base/bus.c
@@ -164,8 +164,6 @@
static struct kset *bus_kset;
-
-#ifdef CONFIG_HOTPLUG
/* Manually detach a device from its associated driver. */
static ssize_t driver_unbind(struct device_driver *drv,
const char *buf, size_t count)
@@ -252,7 +250,6 @@
return -EINVAL;
return count;
}
-#endif
static struct device *next_device(struct klist_iter *i)
{
@@ -618,11 +615,6 @@
}
}
-#ifdef CONFIG_HOTPLUG
-/*
- * Thanks to drivers making their tables __devinit, we can't allow manual
- * bind and unbind from userspace unless CONFIG_HOTPLUG is enabled.
- */
static int __must_check add_bind_files(struct device_driver *drv)
{
int ret;
@@ -666,12 +658,6 @@
bus_remove_file(bus, &bus_attr_drivers_autoprobe);
bus_remove_file(bus, &bus_attr_drivers_probe);
}
-#else
-static inline int add_bind_files(struct device_driver *drv) { return 0; }
-static inline void remove_bind_files(struct device_driver *drv) {}
-static inline int add_probe_files(struct bus_type *bus) { return 0; }
-static inline void remove_probe_files(struct bus_type *bus) {}
-#endif
static ssize_t driver_uevent_store(struct device_driver *drv,
const char *buf, size_t count)
diff --git a/drivers/base/core.c b/drivers/base/core.c
index abea76c..4179139 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -1180,7 +1180,6 @@
if (dev->bus)
blocking_notifier_call_chain(&dev->bus->p->bus_notifier,
BUS_NOTIFY_DEL_DEVICE, dev);
- device_pm_remove(dev);
dpm_sysfs_remove(dev);
if (parent)
klist_del(&dev->p->knode_parent);
@@ -1205,6 +1204,7 @@
device_remove_file(dev, &uevent_attr);
device_remove_attrs(dev);
bus_remove_device(dev);
+ device_pm_remove(dev);
driver_deferred_probe_del(dev);
/* Notify the platform of the removal, in case they
@@ -1399,7 +1399,7 @@
struct module *owner;
};
-inline struct root_device *to_root_device(struct device *d)
+static inline struct root_device *to_root_device(struct device *d)
{
return container_of(d, struct root_device, dev);
}
@@ -1840,10 +1840,12 @@
pm_runtime_barrier(dev);
if (dev->bus && dev->bus->shutdown) {
- dev_dbg(dev, "shutdown\n");
+ if (initcall_debug)
+ dev_info(dev, "shutdown\n");
dev->bus->shutdown(dev);
} else if (dev->driver && dev->driver->shutdown) {
- dev_dbg(dev, "shutdown\n");
+ if (initcall_debug)
+ dev_info(dev, "shutdown\n");
dev->driver->shutdown(dev);
}
diff --git a/drivers/base/devres.c b/drivers/base/devres.c
index 8731979..6683906 100644
--- a/drivers/base/devres.c
+++ b/drivers/base/devres.c
@@ -50,8 +50,8 @@
const char *op)
{
if (unlikely(log_devres))
- dev_printk(KERN_ERR, dev, "DEVRES %3s %p %s (%lu bytes)\n",
- op, node, node->name, (unsigned long)node->size);
+ dev_err(dev, "DEVRES %3s %p %s (%lu bytes)\n",
+ op, node, node->name, (unsigned long)node->size);
}
#else /* CONFIG_DEBUG_DEVRES */
#define set_node_dbginfo(node, n, s) do {} while (0)
diff --git a/drivers/base/firmware_class.c b/drivers/base/firmware_class.c
index 8945f4e..d814603 100644
--- a/drivers/base/firmware_class.c
+++ b/drivers/base/firmware_class.c
@@ -143,7 +143,7 @@
};
struct firmware_priv {
- struct timer_list timeout;
+ struct delayed_work timeout_work;
bool nowait;
struct device dev;
struct firmware_buf *buf;
@@ -246,7 +246,6 @@
__func__, buf->fw_id, buf, buf->data,
(unsigned int)buf->size);
- spin_lock(&fwc->lock);
list_del(&buf->list);
spin_unlock(&fwc->lock);
@@ -263,19 +262,32 @@
static void fw_free_buf(struct firmware_buf *buf)
{
- kref_put(&buf->ref, __fw_free_buf);
+ struct firmware_cache *fwc = buf->fwc;
+ spin_lock(&fwc->lock);
+ if (!kref_put(&buf->ref, __fw_free_buf))
+ spin_unlock(&fwc->lock);
}
/* direct firmware loading support */
-static const char *fw_path[] = {
+static char fw_path_para[256];
+static const char * const fw_path[] = {
+ fw_path_para,
"/lib/firmware/updates/" UTS_RELEASE,
"/lib/firmware/updates",
"/lib/firmware/" UTS_RELEASE,
"/lib/firmware"
};
+/*
+ * Typical usage is that passing 'firmware_class.path=$CUSTOMIZED_PATH'
+ * from kernel command line because firmware_class is generally built in
+ * kernel instead of module.
+ */
+module_param_string(path, fw_path_para, sizeof(fw_path_para), 0644);
+MODULE_PARM_DESC(path, "customized firmware image search path with a higher priority than default path");
+
/* Don't inline this: 'struct kstat' is biggish */
-static noinline long fw_file_size(struct file *file)
+static noinline_for_stack long fw_file_size(struct file *file)
{
struct kstat st;
if (vfs_getattr(file->f_path.mnt, file->f_path.dentry, &st))
@@ -315,6 +327,11 @@
for (i = 0; i < ARRAY_SIZE(fw_path); i++) {
struct file *file;
+
+ /* skip the unset customized path */
+ if (!fw_path[i][0])
+ continue;
+
snprintf(path, PATH_MAX, "%s/%s", fw_path[i], buf->fw_id);
file = filp_open(path, O_RDONLY, 0);
@@ -667,11 +684,18 @@
.write = firmware_data_write,
};
-static void firmware_class_timeout(u_long data)
+static void firmware_class_timeout_work(struct work_struct *work)
{
- struct firmware_priv *fw_priv = (struct firmware_priv *) data;
+ struct firmware_priv *fw_priv = container_of(work,
+ struct firmware_priv, timeout_work.work);
+ mutex_lock(&fw_lock);
+ if (test_bit(FW_STATUS_DONE, &(fw_priv->buf->status))) {
+ mutex_unlock(&fw_lock);
+ return;
+ }
fw_load_abort(fw_priv);
+ mutex_unlock(&fw_lock);
}
static struct firmware_priv *
@@ -690,8 +714,8 @@
fw_priv->nowait = nowait;
fw_priv->fw = firmware;
- setup_timer(&fw_priv->timeout,
- firmware_class_timeout, (u_long) fw_priv);
+ INIT_DELAYED_WORK(&fw_priv->timeout_work,
+ firmware_class_timeout_work);
f_dev = &fw_priv->dev;
@@ -858,7 +882,9 @@
dev_dbg(f_dev->parent, "firmware: direct-loading"
" firmware %s\n", buf->fw_id);
+ mutex_lock(&fw_lock);
set_bit(FW_STATUS_DONE, &buf->status);
+ mutex_unlock(&fw_lock);
complete_all(&buf->completion);
direct_load = 1;
goto handle_fw;
@@ -894,15 +920,14 @@
dev_set_uevent_suppress(f_dev, false);
dev_dbg(f_dev, "firmware: requesting %s\n", buf->fw_id);
if (timeout != MAX_SCHEDULE_TIMEOUT)
- mod_timer(&fw_priv->timeout,
- round_jiffies_up(jiffies + timeout));
+ schedule_delayed_work(&fw_priv->timeout_work, timeout);
kobject_uevent(&fw_priv->dev.kobj, KOBJ_ADD);
}
wait_for_completion(&buf->completion);
- del_timer_sync(&fw_priv->timeout);
+ cancel_delayed_work_sync(&fw_priv->timeout_work);
handle_fw:
mutex_lock(&fw_lock);
@@ -963,6 +988,9 @@
* firmware image for this or any other device.
*
* Caller must hold the reference count of @device.
+ *
+ * The function can be called safely inside device's suspend and
+ * resume callback.
**/
int
request_firmware(const struct firmware **firmware_p, const char *name,
diff --git a/drivers/base/platform.c b/drivers/base/platform.c
index 72c776f..c0b8df3 100644
--- a/drivers/base/platform.c
+++ b/drivers/base/platform.c
@@ -21,6 +21,7 @@
#include <linux/slab.h>
#include <linux/pm_runtime.h>
#include <linux/idr.h>
+#include <linux/acpi.h>
#include "base.h"
#include "power/power.h"
@@ -44,7 +45,7 @@
* be setup before the platform_notifier is called. So if a user needs to
* manipulate any relevant information in the pdev_archdata they can do:
*
- * platform_devic_alloc()
+ * platform_device_alloc()
* ... manipulate ...
* platform_device_add()
*
@@ -122,7 +123,7 @@
EXPORT_SYMBOL_GPL(platform_get_resource_byname);
/**
- * platform_get_irq - get an IRQ for a device
+ * platform_get_irq_byname - get an IRQ for a device by name
* @dev: platform device
* @name: IRQ name
*/
@@ -436,6 +437,7 @@
goto err_alloc;
pdev->dev.parent = pdevinfo->parent;
+ ACPI_HANDLE_SET(&pdev->dev, pdevinfo->acpi_node.handle);
if (pdevinfo->dma_mask) {
/*
@@ -466,6 +468,7 @@
ret = platform_device_add(pdev);
if (ret) {
err:
+ ACPI_HANDLE_SET(&pdev->dev, NULL);
kfree(pdev->dev.dma_mask);
err_alloc:
@@ -481,8 +484,16 @@
{
struct platform_driver *drv = to_platform_driver(_dev->driver);
struct platform_device *dev = to_platform_device(_dev);
+ int ret;
- return drv->probe(dev);
+ if (ACPI_HANDLE(_dev))
+ acpi_dev_pm_attach(_dev, true);
+
+ ret = drv->probe(dev);
+ if (ret && ACPI_HANDLE(_dev))
+ acpi_dev_pm_detach(_dev, true);
+
+ return ret;
}
static int platform_drv_probe_fail(struct device *_dev)
@@ -494,8 +505,13 @@
{
struct platform_driver *drv = to_platform_driver(_dev->driver);
struct platform_device *dev = to_platform_device(_dev);
+ int ret;
- return drv->remove(dev);
+ ret = drv->remove(dev);
+ if (ACPI_HANDLE(_dev))
+ acpi_dev_pm_detach(_dev, true);
+
+ return ret;
}
static void platform_drv_shutdown(struct device *_dev)
@@ -504,6 +520,8 @@
struct platform_device *dev = to_platform_device(_dev);
drv->shutdown(dev);
+ if (ACPI_HANDLE(_dev))
+ acpi_dev_pm_detach(_dev, true);
}
/**
@@ -709,6 +727,10 @@
if (of_driver_match_device(dev, drv))
return 1;
+ /* Then try ACPI style match */
+ if (acpi_driver_match_device(dev, drv))
+ return 1;
+
/* Then try to match against the id table */
if (pdrv->id_table)
return platform_match_id(pdrv->id_table, pdev) != NULL;
diff --git a/drivers/base/power/clock_ops.c b/drivers/base/power/clock_ops.c
index eb78e96..9d8fde7 100644
--- a/drivers/base/power/clock_ops.c
+++ b/drivers/base/power/clock_ops.c
@@ -99,7 +99,7 @@
if (ce->status < PCE_STATUS_ERROR) {
if (ce->status == PCE_STATUS_ENABLED)
- clk_disable(ce->clk);
+ clk_disable_unprepare(ce->clk);
if (ce->status >= PCE_STATUS_ACQUIRED)
clk_put(ce->clk);
@@ -396,7 +396,7 @@
clk = clk_get(dev, con_id);
if (!IS_ERR(clk)) {
- clk_enable(clk);
+ clk_prepare_enable(clk);
clk_put(clk);
dev_info(dev, "Runtime PM disabled, clock forced on.\n");
}
@@ -413,7 +413,7 @@
clk = clk_get(dev, con_id);
if (!IS_ERR(clk)) {
- clk_disable(clk);
+ clk_disable_unprepare(clk);
clk_put(clk);
dev_info(dev, "Runtime PM disabled, clock forced off.\n");
}
diff --git a/drivers/base/power/domain.c b/drivers/base/power/domain.c
index 96b71b6..acc3a8d 100644
--- a/drivers/base/power/domain.c
+++ b/drivers/base/power/domain.c
@@ -470,10 +470,19 @@
return -EBUSY;
not_suspended = 0;
- list_for_each_entry(pdd, &genpd->dev_list, list_node)
+ list_for_each_entry(pdd, &genpd->dev_list, list_node) {
+ enum pm_qos_flags_status stat;
+
+ stat = dev_pm_qos_flags(pdd->dev,
+ PM_QOS_FLAG_NO_POWER_OFF
+ | PM_QOS_FLAG_REMOTE_WAKEUP);
+ if (stat > PM_QOS_FLAGS_NONE)
+ return -EBUSY;
+
if (pdd->dev->driver && (!pm_runtime_suspended(pdd->dev)
|| pdd->dev->power.irq_safe))
not_suspended++;
+ }
if (not_suspended > genpd->in_progress)
return -EBUSY;
diff --git a/drivers/base/power/opp.c b/drivers/base/power/opp.c
index d946864..50b2831 100644
--- a/drivers/base/power/opp.c
+++ b/drivers/base/power/opp.c
@@ -23,6 +23,7 @@
#include <linux/rcupdate.h>
#include <linux/opp.h>
#include <linux/of.h>
+#include <linux/export.h>
/*
* Internal data structure organization with the OPP layer library is as
@@ -65,6 +66,7 @@
unsigned long u_volt;
struct device_opp *dev_opp;
+ struct rcu_head head;
};
/**
@@ -160,6 +162,7 @@
return v;
}
+EXPORT_SYMBOL(opp_get_voltage);
/**
* opp_get_freq() - Gets the frequency corresponding to an available opp
@@ -189,6 +192,7 @@
return f;
}
+EXPORT_SYMBOL(opp_get_freq);
/**
* opp_get_opp_count() - Get number of opps available in the opp list
@@ -221,6 +225,7 @@
return count;
}
+EXPORT_SYMBOL(opp_get_opp_count);
/**
* opp_find_freq_exact() - search for an exact frequency
@@ -230,7 +235,10 @@
*
* Searches for exact match in the opp list and returns pointer to the matching
* opp if found, else returns ERR_PTR in case of error and should be handled
- * using IS_ERR.
+ * using IS_ERR. Error return values can be:
+ * EINVAL: for bad pointer
+ * ERANGE: no match found for search
+ * ENODEV: if device not found in list of registered devices
*
* Note: available is a modifier for the search. if available=true, then the
* match is for exact matching frequency and is available in the stored OPP
@@ -249,7 +257,7 @@
bool available)
{
struct device_opp *dev_opp;
- struct opp *temp_opp, *opp = ERR_PTR(-ENODEV);
+ struct opp *temp_opp, *opp = ERR_PTR(-ERANGE);
dev_opp = find_device_opp(dev);
if (IS_ERR(dev_opp)) {
@@ -268,6 +276,7 @@
return opp;
}
+EXPORT_SYMBOL(opp_find_freq_exact);
/**
* opp_find_freq_ceil() - Search for an rounded ceil freq
@@ -278,7 +287,11 @@
* for a device.
*
* Returns matching *opp and refreshes *freq accordingly, else returns
- * ERR_PTR in case of error and should be handled using IS_ERR.
+ * ERR_PTR in case of error and should be handled using IS_ERR. Error return
+ * values can be:
+ * EINVAL: for bad pointer
+ * ERANGE: no match found for search
+ * ENODEV: if device not found in list of registered devices
*
* Locking: This function must be called under rcu_read_lock(). opp is a rcu
* protected pointer. The reason for the same is that the opp pointer which is
@@ -289,7 +302,7 @@
struct opp *opp_find_freq_ceil(struct device *dev, unsigned long *freq)
{
struct device_opp *dev_opp;
- struct opp *temp_opp, *opp = ERR_PTR(-ENODEV);
+ struct opp *temp_opp, *opp = ERR_PTR(-ERANGE);
if (!dev || !freq) {
dev_err(dev, "%s: Invalid argument freq=%p\n", __func__, freq);
@@ -298,7 +311,7 @@
dev_opp = find_device_opp(dev);
if (IS_ERR(dev_opp))
- return opp;
+ return ERR_CAST(dev_opp);
list_for_each_entry_rcu(temp_opp, &dev_opp->opp_list, node) {
if (temp_opp->available && temp_opp->rate >= *freq) {
@@ -310,6 +323,7 @@
return opp;
}
+EXPORT_SYMBOL(opp_find_freq_ceil);
/**
* opp_find_freq_floor() - Search for a rounded floor freq
@@ -320,7 +334,11 @@
* for a device.
*
* Returns matching *opp and refreshes *freq accordingly, else returns
- * ERR_PTR in case of error and should be handled using IS_ERR.
+ * ERR_PTR in case of error and should be handled using IS_ERR. Error return
+ * values can be:
+ * EINVAL: for bad pointer
+ * ERANGE: no match found for search
+ * ENODEV: if device not found in list of registered devices
*
* Locking: This function must be called under rcu_read_lock(). opp is a rcu
* protected pointer. The reason for the same is that the opp pointer which is
@@ -331,7 +349,7 @@
struct opp *opp_find_freq_floor(struct device *dev, unsigned long *freq)
{
struct device_opp *dev_opp;
- struct opp *temp_opp, *opp = ERR_PTR(-ENODEV);
+ struct opp *temp_opp, *opp = ERR_PTR(-ERANGE);
if (!dev || !freq) {
dev_err(dev, "%s: Invalid argument freq=%p\n", __func__, freq);
@@ -340,7 +358,7 @@
dev_opp = find_device_opp(dev);
if (IS_ERR(dev_opp))
- return opp;
+ return ERR_CAST(dev_opp);
list_for_each_entry_rcu(temp_opp, &dev_opp->opp_list, node) {
if (temp_opp->available) {
@@ -356,6 +374,7 @@
return opp;
}
+EXPORT_SYMBOL(opp_find_freq_floor);
/**
* opp_add() - Add an OPP table from a table definitions
@@ -512,7 +531,7 @@
list_replace_rcu(&opp->node, &new_opp->node);
mutex_unlock(&dev_opp_list_lock);
- synchronize_rcu();
+ kfree_rcu(opp, head);
/* Notify the change of the OPP availability */
if (availability_req)
@@ -522,13 +541,10 @@
srcu_notifier_call_chain(&dev_opp->head, OPP_EVENT_DISABLE,
new_opp);
- /* clean up old opp */
- new_opp = opp;
- goto out;
+ return 0;
unlock:
mutex_unlock(&dev_opp_list_lock);
-out:
kfree(new_opp);
return r;
}
@@ -552,6 +568,7 @@
{
return opp_set_availability(dev, freq, true);
}
+EXPORT_SYMBOL(opp_enable);
/**
* opp_disable() - Disable a specific OPP
@@ -573,6 +590,7 @@
{
return opp_set_availability(dev, freq, false);
}
+EXPORT_SYMBOL(opp_disable);
#ifdef CONFIG_CPU_FREQ
/**
diff --git a/drivers/base/power/power.h b/drivers/base/power/power.h
index 0dbfdf4..b16686a 100644
--- a/drivers/base/power/power.h
+++ b/drivers/base/power/power.h
@@ -93,8 +93,10 @@
extern void rpm_sysfs_remove(struct device *dev);
extern int wakeup_sysfs_add(struct device *dev);
extern void wakeup_sysfs_remove(struct device *dev);
-extern int pm_qos_sysfs_add(struct device *dev);
-extern void pm_qos_sysfs_remove(struct device *dev);
+extern int pm_qos_sysfs_add_latency(struct device *dev);
+extern void pm_qos_sysfs_remove_latency(struct device *dev);
+extern int pm_qos_sysfs_add_flags(struct device *dev);
+extern void pm_qos_sysfs_remove_flags(struct device *dev);
#else /* CONFIG_PM */
diff --git a/drivers/base/power/qos.c b/drivers/base/power/qos.c
index fbbd4ed..ff46387 100644
--- a/drivers/base/power/qos.c
+++ b/drivers/base/power/qos.c
@@ -40,6 +40,7 @@
#include <linux/device.h>
#include <linux/mutex.h>
#include <linux/export.h>
+#include <linux/pm_runtime.h>
#include "power.h"
@@ -48,6 +49,50 @@
static BLOCKING_NOTIFIER_HEAD(dev_pm_notifiers);
/**
+ * __dev_pm_qos_flags - Check PM QoS flags for a given device.
+ * @dev: Device to check the PM QoS flags for.
+ * @mask: Flags to check against.
+ *
+ * This routine must be called with dev->power.lock held.
+ */
+enum pm_qos_flags_status __dev_pm_qos_flags(struct device *dev, s32 mask)
+{
+ struct dev_pm_qos *qos = dev->power.qos;
+ struct pm_qos_flags *pqf;
+ s32 val;
+
+ if (!qos)
+ return PM_QOS_FLAGS_UNDEFINED;
+
+ pqf = &qos->flags;
+ if (list_empty(&pqf->list))
+ return PM_QOS_FLAGS_UNDEFINED;
+
+ val = pqf->effective_flags & mask;
+ if (val)
+ return (val == mask) ? PM_QOS_FLAGS_ALL : PM_QOS_FLAGS_SOME;
+
+ return PM_QOS_FLAGS_NONE;
+}
+
+/**
+ * dev_pm_qos_flags - Check PM QoS flags for a given device (locked).
+ * @dev: Device to check the PM QoS flags for.
+ * @mask: Flags to check against.
+ */
+enum pm_qos_flags_status dev_pm_qos_flags(struct device *dev, s32 mask)
+{
+ unsigned long irqflags;
+ enum pm_qos_flags_status ret;
+
+ spin_lock_irqsave(&dev->power.lock, irqflags);
+ ret = __dev_pm_qos_flags(dev, mask);
+ spin_unlock_irqrestore(&dev->power.lock, irqflags);
+
+ return ret;
+}
+
+/**
* __dev_pm_qos_read_value - Get PM QoS constraint for a given device.
* @dev: Device to get the PM QoS constraint value for.
*
@@ -55,9 +100,7 @@
*/
s32 __dev_pm_qos_read_value(struct device *dev)
{
- struct pm_qos_constraints *c = dev->power.constraints;
-
- return c ? pm_qos_read_value(c) : 0;
+ return dev->power.qos ? pm_qos_read_value(&dev->power.qos->latency) : 0;
}
/**
@@ -76,30 +119,39 @@
return ret;
}
-/*
- * apply_constraint
- * @req: constraint request to apply
- * @action: action to perform add/update/remove, of type enum pm_qos_req_action
- * @value: defines the qos request
+/**
+ * apply_constraint - Add/modify/remove device PM QoS request.
+ * @req: Constraint request to apply
+ * @action: Action to perform (add/update/remove).
+ * @value: Value to assign to the QoS request.
*
* Internal function to update the constraints list using the PM QoS core
* code and if needed call the per-device and the global notification
* callbacks
*/
static int apply_constraint(struct dev_pm_qos_request *req,
- enum pm_qos_req_action action, int value)
+ enum pm_qos_req_action action, s32 value)
{
- int ret, curr_value;
+ struct dev_pm_qos *qos = req->dev->power.qos;
+ int ret;
- ret = pm_qos_update_target(req->dev->power.constraints,
- &req->node, action, value);
-
- if (ret) {
- /* Call the global callbacks if needed */
- curr_value = pm_qos_read_value(req->dev->power.constraints);
- blocking_notifier_call_chain(&dev_pm_notifiers,
- (unsigned long)curr_value,
- req);
+ switch(req->type) {
+ case DEV_PM_QOS_LATENCY:
+ ret = pm_qos_update_target(&qos->latency, &req->data.pnode,
+ action, value);
+ if (ret) {
+ value = pm_qos_read_value(&qos->latency);
+ blocking_notifier_call_chain(&dev_pm_notifiers,
+ (unsigned long)value,
+ req);
+ }
+ break;
+ case DEV_PM_QOS_FLAGS:
+ ret = pm_qos_update_flags(&qos->flags, &req->data.flr,
+ action, value);
+ break;
+ default:
+ ret = -EINVAL;
}
return ret;
@@ -114,28 +166,32 @@
*/
static int dev_pm_qos_constraints_allocate(struct device *dev)
{
+ struct dev_pm_qos *qos;
struct pm_qos_constraints *c;
struct blocking_notifier_head *n;
- c = kzalloc(sizeof(*c), GFP_KERNEL);
- if (!c)
+ qos = kzalloc(sizeof(*qos), GFP_KERNEL);
+ if (!qos)
return -ENOMEM;
n = kzalloc(sizeof(*n), GFP_KERNEL);
if (!n) {
- kfree(c);
+ kfree(qos);
return -ENOMEM;
}
BLOCKING_INIT_NOTIFIER_HEAD(n);
+ c = &qos->latency;
plist_head_init(&c->list);
c->target_value = PM_QOS_DEV_LAT_DEFAULT_VALUE;
c->default_value = PM_QOS_DEV_LAT_DEFAULT_VALUE;
c->type = PM_QOS_MIN;
c->notifiers = n;
+ INIT_LIST_HEAD(&qos->flags.list);
+
spin_lock_irq(&dev->power.lock);
- dev->power.constraints = c;
+ dev->power.qos = qos;
spin_unlock_irq(&dev->power.lock);
return 0;
@@ -151,7 +207,7 @@
void dev_pm_qos_constraints_init(struct device *dev)
{
mutex_lock(&dev_pm_qos_mtx);
- dev->power.constraints = NULL;
+ dev->power.qos = NULL;
dev->power.power_state = PMSG_ON;
mutex_unlock(&dev_pm_qos_mtx);
}
@@ -164,24 +220,28 @@
*/
void dev_pm_qos_constraints_destroy(struct device *dev)
{
+ struct dev_pm_qos *qos;
struct dev_pm_qos_request *req, *tmp;
struct pm_qos_constraints *c;
+ struct pm_qos_flags *f;
/*
- * If the device's PM QoS resume latency limit has been exposed to user
- * space, it has to be hidden at this point.
+ * If the device's PM QoS resume latency limit or PM QoS flags have been
+ * exposed to user space, they have to be hidden at this point.
*/
dev_pm_qos_hide_latency_limit(dev);
+ dev_pm_qos_hide_flags(dev);
mutex_lock(&dev_pm_qos_mtx);
dev->power.power_state = PMSG_INVALID;
- c = dev->power.constraints;
- if (!c)
+ qos = dev->power.qos;
+ if (!qos)
goto out;
- /* Flush the constraints list for the device */
- plist_for_each_entry_safe(req, tmp, &c->list, node) {
+ /* Flush the constraints lists for the device. */
+ c = &qos->latency;
+ plist_for_each_entry_safe(req, tmp, &c->list, data.pnode) {
/*
* Update constraints list and call the notification
* callbacks if needed
@@ -189,13 +249,18 @@
apply_constraint(req, PM_QOS_REMOVE_REQ, PM_QOS_DEFAULT_VALUE);
memset(req, 0, sizeof(*req));
}
+ f = &qos->flags;
+ list_for_each_entry_safe(req, tmp, &f->list, data.flr.node) {
+ apply_constraint(req, PM_QOS_REMOVE_REQ, PM_QOS_DEFAULT_VALUE);
+ memset(req, 0, sizeof(*req));
+ }
spin_lock_irq(&dev->power.lock);
- dev->power.constraints = NULL;
+ dev->power.qos = NULL;
spin_unlock_irq(&dev->power.lock);
kfree(c->notifiers);
- kfree(c);
+ kfree(qos);
out:
mutex_unlock(&dev_pm_qos_mtx);
@@ -205,6 +270,7 @@
* dev_pm_qos_add_request - inserts new qos request into the list
* @dev: target device for the constraint
* @req: pointer to a preallocated handle
+ * @type: type of the request
* @value: defines the qos request
*
* This function inserts a new entry in the device constraints list of
@@ -218,9 +284,12 @@
* -EINVAL in case of wrong parameters, -ENOMEM if there's not enough memory
* to allocate for data structures, -ENODEV if the device has just been removed
* from the system.
+ *
+ * Callers should ensure that the target device is not RPM_SUSPENDED before
+ * using this function for requests of type DEV_PM_QOS_FLAGS.
*/
int dev_pm_qos_add_request(struct device *dev, struct dev_pm_qos_request *req,
- s32 value)
+ enum dev_pm_qos_req_type type, s32 value)
{
int ret = 0;
@@ -235,7 +304,7 @@
mutex_lock(&dev_pm_qos_mtx);
- if (!dev->power.constraints) {
+ if (!dev->power.qos) {
if (dev->power.power_state.event == PM_EVENT_INVALID) {
/* The device has been removed from the system. */
req->dev = NULL;
@@ -251,8 +320,10 @@
}
}
- if (!ret)
+ if (!ret) {
+ req->type = type;
ret = apply_constraint(req, PM_QOS_ADD_REQ, value);
+ }
out:
mutex_unlock(&dev_pm_qos_mtx);
@@ -262,6 +333,37 @@
EXPORT_SYMBOL_GPL(dev_pm_qos_add_request);
/**
+ * __dev_pm_qos_update_request - Modify an existing device PM QoS request.
+ * @req : PM QoS request to modify.
+ * @new_value: New value to request.
+ */
+static int __dev_pm_qos_update_request(struct dev_pm_qos_request *req,
+ s32 new_value)
+{
+ s32 curr_value;
+ int ret = 0;
+
+ if (!req->dev->power.qos)
+ return -ENODEV;
+
+ switch(req->type) {
+ case DEV_PM_QOS_LATENCY:
+ curr_value = req->data.pnode.prio;
+ break;
+ case DEV_PM_QOS_FLAGS:
+ curr_value = req->data.flr.flags;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if (curr_value != new_value)
+ ret = apply_constraint(req, PM_QOS_UPDATE_REQ, new_value);
+
+ return ret;
+}
+
+/**
* dev_pm_qos_update_request - modifies an existing qos request
* @req : handle to list element holding a dev_pm_qos request to use
* @new_value: defines the qos request
@@ -275,11 +377,13 @@
* 0 if the aggregated constraint value has not changed,
* -EINVAL in case of wrong parameters, -ENODEV if the device has been
* removed from the system
+ *
+ * Callers should ensure that the target device is not RPM_SUSPENDED before
+ * using this function for requests of type DEV_PM_QOS_FLAGS.
*/
-int dev_pm_qos_update_request(struct dev_pm_qos_request *req,
- s32 new_value)
+int dev_pm_qos_update_request(struct dev_pm_qos_request *req, s32 new_value)
{
- int ret = 0;
+ int ret;
if (!req) /*guard against callers passing in null */
return -EINVAL;
@@ -289,17 +393,9 @@
return -EINVAL;
mutex_lock(&dev_pm_qos_mtx);
-
- if (req->dev->power.constraints) {
- if (new_value != req->node.prio)
- ret = apply_constraint(req, PM_QOS_UPDATE_REQ,
- new_value);
- } else {
- /* Return if the device has been removed */
- ret = -ENODEV;
- }
-
+ ret = __dev_pm_qos_update_request(req, new_value);
mutex_unlock(&dev_pm_qos_mtx);
+
return ret;
}
EXPORT_SYMBOL_GPL(dev_pm_qos_update_request);
@@ -315,6 +411,9 @@
* 0 if the aggregated constraint value has not changed,
* -EINVAL in case of wrong parameters, -ENODEV if the device has been
* removed from the system
+ *
+ * Callers should ensure that the target device is not RPM_SUSPENDED before
+ * using this function for requests of type DEV_PM_QOS_FLAGS.
*/
int dev_pm_qos_remove_request(struct dev_pm_qos_request *req)
{
@@ -329,7 +428,7 @@
mutex_lock(&dev_pm_qos_mtx);
- if (req->dev->power.constraints) {
+ if (req->dev->power.qos) {
ret = apply_constraint(req, PM_QOS_REMOVE_REQ,
PM_QOS_DEFAULT_VALUE);
memset(req, 0, sizeof(*req));
@@ -362,13 +461,13 @@
mutex_lock(&dev_pm_qos_mtx);
- if (!dev->power.constraints)
+ if (!dev->power.qos)
ret = dev->power.power_state.event != PM_EVENT_INVALID ?
dev_pm_qos_constraints_allocate(dev) : -ENODEV;
if (!ret)
ret = blocking_notifier_chain_register(
- dev->power.constraints->notifiers, notifier);
+ dev->power.qos->latency.notifiers, notifier);
mutex_unlock(&dev_pm_qos_mtx);
return ret;
@@ -393,9 +492,9 @@
mutex_lock(&dev_pm_qos_mtx);
/* Silently return if the constraints object is not present. */
- if (dev->power.constraints)
+ if (dev->power.qos)
retval = blocking_notifier_chain_unregister(
- dev->power.constraints->notifiers,
+ dev->power.qos->latency.notifiers,
notifier);
mutex_unlock(&dev_pm_qos_mtx);
@@ -449,7 +548,8 @@
ancestor = ancestor->parent;
if (ancestor)
- error = dev_pm_qos_add_request(ancestor, req, value);
+ error = dev_pm_qos_add_request(ancestor, req,
+ DEV_PM_QOS_LATENCY, value);
if (error < 0)
req->dev = NULL;
@@ -459,10 +559,19 @@
EXPORT_SYMBOL_GPL(dev_pm_qos_add_ancestor_request);
#ifdef CONFIG_PM_RUNTIME
-static void __dev_pm_qos_drop_user_request(struct device *dev)
+static void __dev_pm_qos_drop_user_request(struct device *dev,
+ enum dev_pm_qos_req_type type)
{
- dev_pm_qos_remove_request(dev->power.pq_req);
- dev->power.pq_req = NULL;
+ switch(type) {
+ case DEV_PM_QOS_LATENCY:
+ dev_pm_qos_remove_request(dev->power.qos->latency_req);
+ dev->power.qos->latency_req = NULL;
+ break;
+ case DEV_PM_QOS_FLAGS:
+ dev_pm_qos_remove_request(dev->power.qos->flags_req);
+ dev->power.qos->flags_req = NULL;
+ break;
+ }
}
/**
@@ -478,21 +587,21 @@
if (!device_is_registered(dev) || value < 0)
return -EINVAL;
- if (dev->power.pq_req)
+ if (dev->power.qos && dev->power.qos->latency_req)
return -EEXIST;
req = kzalloc(sizeof(*req), GFP_KERNEL);
if (!req)
return -ENOMEM;
- ret = dev_pm_qos_add_request(dev, req, value);
+ ret = dev_pm_qos_add_request(dev, req, DEV_PM_QOS_LATENCY, value);
if (ret < 0)
return ret;
- dev->power.pq_req = req;
- ret = pm_qos_sysfs_add(dev);
+ dev->power.qos->latency_req = req;
+ ret = pm_qos_sysfs_add_latency(dev);
if (ret)
- __dev_pm_qos_drop_user_request(dev);
+ __dev_pm_qos_drop_user_request(dev, DEV_PM_QOS_LATENCY);
return ret;
}
@@ -504,10 +613,92 @@
*/
void dev_pm_qos_hide_latency_limit(struct device *dev)
{
- if (dev->power.pq_req) {
- pm_qos_sysfs_remove(dev);
- __dev_pm_qos_drop_user_request(dev);
+ if (dev->power.qos && dev->power.qos->latency_req) {
+ pm_qos_sysfs_remove_latency(dev);
+ __dev_pm_qos_drop_user_request(dev, DEV_PM_QOS_LATENCY);
}
}
EXPORT_SYMBOL_GPL(dev_pm_qos_hide_latency_limit);
+
+/**
+ * dev_pm_qos_expose_flags - Expose PM QoS flags of a device to user space.
+ * @dev: Device whose PM QoS flags are to be exposed to user space.
+ * @val: Initial values of the flags.
+ */
+int dev_pm_qos_expose_flags(struct device *dev, s32 val)
+{
+ struct dev_pm_qos_request *req;
+ int ret;
+
+ if (!device_is_registered(dev))
+ return -EINVAL;
+
+ if (dev->power.qos && dev->power.qos->flags_req)
+ return -EEXIST;
+
+ req = kzalloc(sizeof(*req), GFP_KERNEL);
+ if (!req)
+ return -ENOMEM;
+
+ pm_runtime_get_sync(dev);
+ ret = dev_pm_qos_add_request(dev, req, DEV_PM_QOS_FLAGS, val);
+ if (ret < 0)
+ goto fail;
+
+ dev->power.qos->flags_req = req;
+ ret = pm_qos_sysfs_add_flags(dev);
+ if (ret)
+ __dev_pm_qos_drop_user_request(dev, DEV_PM_QOS_FLAGS);
+
+fail:
+ pm_runtime_put(dev);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(dev_pm_qos_expose_flags);
+
+/**
+ * dev_pm_qos_hide_flags - Hide PM QoS flags of a device from user space.
+ * @dev: Device whose PM QoS flags are to be hidden from user space.
+ */
+void dev_pm_qos_hide_flags(struct device *dev)
+{
+ if (dev->power.qos && dev->power.qos->flags_req) {
+ pm_qos_sysfs_remove_flags(dev);
+ pm_runtime_get_sync(dev);
+ __dev_pm_qos_drop_user_request(dev, DEV_PM_QOS_FLAGS);
+ pm_runtime_put(dev);
+ }
+}
+EXPORT_SYMBOL_GPL(dev_pm_qos_hide_flags);
+
+/**
+ * dev_pm_qos_update_flags - Update PM QoS flags request owned by user space.
+ * @dev: Device to update the PM QoS flags request for.
+ * @mask: Flags to set/clear.
+ * @set: Whether to set or clear the flags (true means set).
+ */
+int dev_pm_qos_update_flags(struct device *dev, s32 mask, bool set)
+{
+ s32 value;
+ int ret;
+
+ if (!dev->power.qos || !dev->power.qos->flags_req)
+ return -EINVAL;
+
+ pm_runtime_get_sync(dev);
+ mutex_lock(&dev_pm_qos_mtx);
+
+ value = dev_pm_qos_requested_flags(dev);
+ if (set)
+ value |= mask;
+ else
+ value &= ~mask;
+
+ ret = __dev_pm_qos_update_request(dev->power.qos->flags_req, value);
+
+ mutex_unlock(&dev_pm_qos_mtx);
+ pm_runtime_put(dev);
+
+ return ret;
+}
#endif /* CONFIG_PM_RUNTIME */
diff --git a/drivers/base/power/sysfs.c b/drivers/base/power/sysfs.c
index b91dc6f..50d16e3 100644
--- a/drivers/base/power/sysfs.c
+++ b/drivers/base/power/sysfs.c
@@ -221,7 +221,7 @@
static ssize_t pm_qos_latency_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
- return sprintf(buf, "%d\n", dev->power.pq_req->node.prio);
+ return sprintf(buf, "%d\n", dev_pm_qos_requested_latency(dev));
}
static ssize_t pm_qos_latency_store(struct device *dev,
@@ -237,12 +237,66 @@
if (value < 0)
return -EINVAL;
- ret = dev_pm_qos_update_request(dev->power.pq_req, value);
+ ret = dev_pm_qos_update_request(dev->power.qos->latency_req, value);
return ret < 0 ? ret : n;
}
static DEVICE_ATTR(pm_qos_resume_latency_us, 0644,
pm_qos_latency_show, pm_qos_latency_store);
+
+static ssize_t pm_qos_no_power_off_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ return sprintf(buf, "%d\n", !!(dev_pm_qos_requested_flags(dev)
+ & PM_QOS_FLAG_NO_POWER_OFF));
+}
+
+static ssize_t pm_qos_no_power_off_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t n)
+{
+ int ret;
+
+ if (kstrtoint(buf, 0, &ret))
+ return -EINVAL;
+
+ if (ret != 0 && ret != 1)
+ return -EINVAL;
+
+ ret = dev_pm_qos_update_flags(dev, PM_QOS_FLAG_NO_POWER_OFF, ret);
+ return ret < 0 ? ret : n;
+}
+
+static DEVICE_ATTR(pm_qos_no_power_off, 0644,
+ pm_qos_no_power_off_show, pm_qos_no_power_off_store);
+
+static ssize_t pm_qos_remote_wakeup_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ return sprintf(buf, "%d\n", !!(dev_pm_qos_requested_flags(dev)
+ & PM_QOS_FLAG_REMOTE_WAKEUP));
+}
+
+static ssize_t pm_qos_remote_wakeup_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t n)
+{
+ int ret;
+
+ if (kstrtoint(buf, 0, &ret))
+ return -EINVAL;
+
+ if (ret != 0 && ret != 1)
+ return -EINVAL;
+
+ ret = dev_pm_qos_update_flags(dev, PM_QOS_FLAG_REMOTE_WAKEUP, ret);
+ return ret < 0 ? ret : n;
+}
+
+static DEVICE_ATTR(pm_qos_remote_wakeup, 0644,
+ pm_qos_remote_wakeup_show, pm_qos_remote_wakeup_store);
#endif /* CONFIG_PM_RUNTIME */
#ifdef CONFIG_PM_SLEEP
@@ -564,15 +618,27 @@
.attrs = runtime_attrs,
};
-static struct attribute *pm_qos_attrs[] = {
+static struct attribute *pm_qos_latency_attrs[] = {
#ifdef CONFIG_PM_RUNTIME
&dev_attr_pm_qos_resume_latency_us.attr,
#endif /* CONFIG_PM_RUNTIME */
NULL,
};
-static struct attribute_group pm_qos_attr_group = {
+static struct attribute_group pm_qos_latency_attr_group = {
.name = power_group_name,
- .attrs = pm_qos_attrs,
+ .attrs = pm_qos_latency_attrs,
+};
+
+static struct attribute *pm_qos_flags_attrs[] = {
+#ifdef CONFIG_PM_RUNTIME
+ &dev_attr_pm_qos_no_power_off.attr,
+ &dev_attr_pm_qos_remote_wakeup.attr,
+#endif /* CONFIG_PM_RUNTIME */
+ NULL,
+};
+static struct attribute_group pm_qos_flags_attr_group = {
+ .name = power_group_name,
+ .attrs = pm_qos_flags_attrs,
};
int dpm_sysfs_add(struct device *dev)
@@ -615,14 +681,24 @@
sysfs_unmerge_group(&dev->kobj, &pm_wakeup_attr_group);
}
-int pm_qos_sysfs_add(struct device *dev)
+int pm_qos_sysfs_add_latency(struct device *dev)
{
- return sysfs_merge_group(&dev->kobj, &pm_qos_attr_group);
+ return sysfs_merge_group(&dev->kobj, &pm_qos_latency_attr_group);
}
-void pm_qos_sysfs_remove(struct device *dev)
+void pm_qos_sysfs_remove_latency(struct device *dev)
{
- sysfs_unmerge_group(&dev->kobj, &pm_qos_attr_group);
+ sysfs_unmerge_group(&dev->kobj, &pm_qos_latency_attr_group);
+}
+
+int pm_qos_sysfs_add_flags(struct device *dev)
+{
+ return sysfs_merge_group(&dev->kobj, &pm_qos_flags_attr_group);
+}
+
+void pm_qos_sysfs_remove_flags(struct device *dev)
+{
+ sysfs_unmerge_group(&dev->kobj, &pm_qos_flags_attr_group);
}
void rpm_sysfs_remove(struct device *dev)
diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c
index c8abce3..ed0fade 100644
--- a/drivers/bluetooth/hci_ldisc.c
+++ b/drivers/bluetooth/hci_ldisc.c
@@ -270,15 +270,10 @@
*/
static int hci_uart_tty_open(struct tty_struct *tty)
{
- struct hci_uart *hu = (void *) tty->disc_data;
+ struct hci_uart *hu;
BT_DBG("tty %p", tty);
- /* FIXME: This btw is bogus, nothing requires the old ldisc to clear
- the pointer */
- if (hu)
- return -EEXIST;
-
/* Error if the tty has no write op instead of leaving an exploitable
hole */
if (tty->ops->write == NULL)
diff --git a/drivers/char/agp/ali-agp.c b/drivers/char/agp/ali-agp.c
index fd79351..4784935 100644
--- a/drivers/char/agp/ali-agp.c
+++ b/drivers/char/agp/ali-agp.c
@@ -249,7 +249,7 @@
};
-static struct agp_device_ids ali_agp_device_ids[] __devinitdata =
+static struct agp_device_ids ali_agp_device_ids[] =
{
{
.device_id = PCI_DEVICE_ID_AL_M1541,
@@ -374,7 +374,7 @@
return agp_add_bridge(bridge);
}
-static void __devexit agp_ali_remove(struct pci_dev *pdev)
+static void agp_ali_remove(struct pci_dev *pdev)
{
struct agp_bridge_data *bridge = pci_get_drvdata(pdev);
diff --git a/drivers/char/agp/amd-k7-agp.c b/drivers/char/agp/amd-k7-agp.c
index f7e8878..1b21011 100644
--- a/drivers/char/agp/amd-k7-agp.c
+++ b/drivers/char/agp/amd-k7-agp.c
@@ -388,7 +388,7 @@
.agp_type_to_mask_type = agp_generic_type_to_mask_type,
};
-static struct agp_device_ids amd_agp_device_ids[] __devinitdata =
+static struct agp_device_ids amd_agp_device_ids[] =
{
{
.device_id = PCI_DEVICE_ID_AMD_FE_GATE_7006,
@@ -480,7 +480,7 @@
return agp_add_bridge(bridge);
}
-static void __devexit agp_amdk7_remove(struct pci_dev *pdev)
+static void agp_amdk7_remove(struct pci_dev *pdev)
{
struct agp_bridge_data *bridge = pci_get_drvdata(pdev);
diff --git a/drivers/char/agp/amd64-agp.c b/drivers/char/agp/amd64-agp.c
index 444f8b6..061d462 100644
--- a/drivers/char/agp/amd64-agp.c
+++ b/drivers/char/agp/amd64-agp.c
@@ -579,7 +579,7 @@
return 0;
}
-static void __devexit agp_amd64_remove(struct pci_dev *pdev)
+static void agp_amd64_remove(struct pci_dev *pdev)
{
struct agp_bridge_data *bridge = pci_get_drvdata(pdev);
diff --git a/drivers/char/agp/ati-agp.c b/drivers/char/agp/ati-agp.c
index dc30e22..ed04335 100644
--- a/drivers/char/agp/ati-agp.c
+++ b/drivers/char/agp/ati-agp.c
@@ -445,7 +445,7 @@
};
-static struct agp_device_ids ati_agp_device_ids[] __devinitdata =
+static struct agp_device_ids ati_agp_device_ids[] =
{
{
.device_id = PCI_DEVICE_ID_ATI_RS100,
@@ -533,7 +533,7 @@
return agp_add_bridge(bridge);
}
-static void __devexit agp_ati_remove(struct pci_dev *pdev)
+static void agp_ati_remove(struct pci_dev *pdev)
{
struct agp_bridge_data *bridge = pci_get_drvdata(pdev);
diff --git a/drivers/char/agp/efficeon-agp.c b/drivers/char/agp/efficeon-agp.c
index d607f53..55f3e33 100644
--- a/drivers/char/agp/efficeon-agp.c
+++ b/drivers/char/agp/efficeon-agp.c
@@ -407,7 +407,7 @@
return agp_add_bridge(bridge);
}
-static void __devexit agp_efficeon_remove(struct pci_dev *pdev)
+static void agp_efficeon_remove(struct pci_dev *pdev)
{
struct agp_bridge_data *bridge = pci_get_drvdata(pdev);
diff --git a/drivers/char/agp/i460-agp.c b/drivers/char/agp/i460-agp.c
index 75b763c..d328b66 100644
--- a/drivers/char/agp/i460-agp.c
+++ b/drivers/char/agp/i460-agp.c
@@ -611,7 +611,7 @@
return agp_add_bridge(bridge);
}
-static void __devexit agp_intel_i460_remove(struct pci_dev *pdev)
+static void agp_intel_i460_remove(struct pci_dev *pdev)
{
struct agp_bridge_data *bridge = pci_get_drvdata(pdev);
diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c
index b130df0..f3a8f52 100644
--- a/drivers/char/agp/intel-agp.c
+++ b/drivers/char/agp/intel-agp.c
@@ -819,7 +819,7 @@
return err;
}
-static void __devexit agp_intel_remove(struct pci_dev *pdev)
+static void agp_intel_remove(struct pci_dev *pdev)
{
struct agp_bridge_data *bridge = pci_get_drvdata(pdev);
diff --git a/drivers/char/agp/nvidia-agp.c b/drivers/char/agp/nvidia-agp.c
index b9734a9..66e0868 100644
--- a/drivers/char/agp/nvidia-agp.c
+++ b/drivers/char/agp/nvidia-agp.c
@@ -388,7 +388,7 @@
return agp_add_bridge(bridge);
}
-static void __devexit agp_nvidia_remove(struct pci_dev *pdev)
+static void agp_nvidia_remove(struct pci_dev *pdev)
{
struct agp_bridge_data *bridge = pci_get_drvdata(pdev);
diff --git a/drivers/char/agp/sgi-agp.c b/drivers/char/agp/sgi-agp.c
index 3a5af2f..a18791d 100644
--- a/drivers/char/agp/sgi-agp.c
+++ b/drivers/char/agp/sgi-agp.c
@@ -327,7 +327,7 @@
return 0;
}
-static void __devexit agp_sgi_cleanup(void)
+static void agp_sgi_cleanup(void)
{
kfree(sgi_tioca_agp_bridges);
sgi_tioca_agp_bridges = NULL;
diff --git a/drivers/char/agp/sis-agp.c b/drivers/char/agp/sis-agp.c
index 08704ae..93d1d31 100644
--- a/drivers/char/agp/sis-agp.c
+++ b/drivers/char/agp/sis-agp.c
@@ -17,8 +17,8 @@
#define PCI_DEVICE_ID_SI_662 0x0662
#define PCI_DEVICE_ID_SI_671 0x0671
-static bool __devinitdata agp_sis_force_delay = 0;
-static int __devinitdata agp_sis_agp_spec = -1;
+static bool agp_sis_force_delay = 0;
+static int agp_sis_agp_spec = -1;
static int sis_fetch_size(void)
{
@@ -148,7 +148,7 @@
};
// chipsets that require the 'delay hack'
-static int sis_broken_chipsets[] __devinitdata = {
+static int sis_broken_chipsets[] = {
PCI_DEVICE_ID_SI_648,
PCI_DEVICE_ID_SI_746,
0 // terminator
@@ -211,7 +211,7 @@
return agp_add_bridge(bridge);
}
-static void __devexit agp_sis_remove(struct pci_dev *pdev)
+static void agp_sis_remove(struct pci_dev *pdev)
{
struct agp_bridge_data *bridge = pci_get_drvdata(pdev);
diff --git a/drivers/char/agp/sworks-agp.c b/drivers/char/agp/sworks-agp.c
index f02f9b0..26020fb 100644
--- a/drivers/char/agp/sworks-agp.c
+++ b/drivers/char/agp/sworks-agp.c
@@ -518,7 +518,7 @@
return agp_add_bridge(bridge);
}
-static void __devexit agp_serverworks_remove(struct pci_dev *pdev)
+static void agp_serverworks_remove(struct pci_dev *pdev)
{
struct agp_bridge_data *bridge = pci_get_drvdata(pdev);
diff --git a/drivers/char/agp/uninorth-agp.c b/drivers/char/agp/uninorth-agp.c
index a32c492..011967a 100644
--- a/drivers/char/agp/uninorth-agp.c
+++ b/drivers/char/agp/uninorth-agp.c
@@ -557,7 +557,7 @@
.needs_scratch_page = true,
};
-static struct agp_device_ids uninorth_agp_device_ids[] __devinitdata = {
+static struct agp_device_ids uninorth_agp_device_ids[] = {
{
.device_id = PCI_DEVICE_ID_APPLE_UNI_N_AGP,
.chipset_name = "UniNorth",
@@ -663,7 +663,7 @@
return agp_add_bridge(bridge);
}
-static void __devexit agp_uninorth_remove(struct pci_dev *pdev)
+static void agp_uninorth_remove(struct pci_dev *pdev)
{
struct agp_bridge_data *bridge = pci_get_drvdata(pdev);
diff --git a/drivers/char/agp/via-agp.c b/drivers/char/agp/via-agp.c
index 8bc3849..6818595 100644
--- a/drivers/char/agp/via-agp.c
+++ b/drivers/char/agp/via-agp.c
@@ -224,7 +224,7 @@
.agp_type_to_mask_type = agp_generic_type_to_mask_type,
};
-static struct agp_device_ids via_agp_device_ids[] __devinitdata =
+static struct agp_device_ids via_agp_device_ids[] =
{
{
.device_id = PCI_DEVICE_ID_VIA_82C597_0,
@@ -485,7 +485,7 @@
return agp_add_bridge(bridge);
}
-static void __devexit agp_via_remove(struct pci_dev *pdev)
+static void agp_via_remove(struct pci_dev *pdev)
{
struct agp_bridge_data *bridge = pci_get_drvdata(pdev);
diff --git a/drivers/char/hpet.c b/drivers/char/hpet.c
index dfd7876..fe6d4be 100644
--- a/drivers/char/hpet.c
+++ b/drivers/char/hpet.c
@@ -816,7 +816,7 @@
static unsigned long hpet_calibrate(struct hpets *hpetp)
{
- unsigned long ret = -1;
+ unsigned long ret = ~0UL;
unsigned long tmp;
/*
@@ -1001,6 +1001,9 @@
irqp = &res->data.extended_irq;
for (i = 0; i < irqp->interrupt_count; i++) {
+ if (hdp->hd_nirqs >= HPET_MAX_TIMERS)
+ break;
+
irq = acpi_register_gsi(NULL, irqp->interrupts[i],
irqp->triggering, irqp->polarity);
if (irq < 0)
diff --git a/drivers/char/hw_random/atmel-rng.c b/drivers/char/hw_random/atmel-rng.c
index 731c904..5a4a6e7 100644
--- a/drivers/char/hw_random/atmel-rng.c
+++ b/drivers/char/hw_random/atmel-rng.c
@@ -98,7 +98,7 @@
return ret;
}
-static int __devexit atmel_trng_remove(struct platform_device *pdev)
+static int atmel_trng_remove(struct platform_device *pdev)
{
struct atmel_trng *trng = platform_get_drvdata(pdev);
diff --git a/drivers/char/hw_random/bcm63xx-rng.c b/drivers/char/hw_random/bcm63xx-rng.c
index aec6a42..ae95bcb 100644
--- a/drivers/char/hw_random/bcm63xx-rng.c
+++ b/drivers/char/hw_random/bcm63xx-rng.c
@@ -145,7 +145,7 @@
return ret;
}
-static int __devexit bcm63xx_rng_remove(struct platform_device *pdev)
+static int bcm63xx_rng_remove(struct platform_device *pdev)
{
struct hwrng *rng = platform_get_drvdata(pdev);
struct bcm63xx_rng_priv *priv = to_rng_priv(rng);
diff --git a/drivers/char/hw_random/exynos-rng.c b/drivers/char/hw_random/exynos-rng.c
index 232ba9c..bdc852e 100644
--- a/drivers/char/hw_random/exynos-rng.c
+++ b/drivers/char/hw_random/exynos-rng.c
@@ -134,7 +134,7 @@
return hwrng_register(&exynos_rng->rng);
}
-static int __devexit exynos_rng_remove(struct platform_device *pdev)
+static int exynos_rng_remove(struct platform_device *pdev)
{
struct exynos_rng *exynos_rng = platform_get_drvdata(pdev);
diff --git a/drivers/char/hw_random/n2-drv.c b/drivers/char/hw_random/n2-drv.c
index ebd48f0..d68a72a 100644
--- a/drivers/char/hw_random/n2-drv.c
+++ b/drivers/char/hw_random/n2-drv.c
@@ -25,7 +25,7 @@
#define DRV_MODULE_VERSION "0.2"
#define DRV_MODULE_RELDATE "July 27, 2011"
-static char version[] __devinitdata =
+static char version[] =
DRV_MODULE_NAME ".c:v" DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n";
MODULE_AUTHOR("David S. Miller (davem@davemloft.net)");
@@ -719,7 +719,7 @@
return err;
}
-static int __devexit n2rng_remove(struct platform_device *op)
+static int n2rng_remove(struct platform_device *op)
{
struct n2rng *np = dev_get_drvdata(&op->dev);
diff --git a/drivers/char/hw_random/pasemi-rng.c b/drivers/char/hw_random/pasemi-rng.c
index 3a63267..a1f7040 100644
--- a/drivers/char/hw_random/pasemi-rng.c
+++ b/drivers/char/hw_random/pasemi-rng.c
@@ -122,7 +122,7 @@
return err;
}
-static int __devexit rng_remove(struct platform_device *dev)
+static int rng_remove(struct platform_device *dev)
{
void __iomem *rng_regs = (void __iomem *)pasemi_rng.priv;
diff --git a/drivers/char/hw_random/picoxcell-rng.c b/drivers/char/hw_random/picoxcell-rng.c
index 97bd891..d4b24c1 100644
--- a/drivers/char/hw_random/picoxcell-rng.c
+++ b/drivers/char/hw_random/picoxcell-rng.c
@@ -151,7 +151,7 @@
return ret;
}
-static int __devexit picoxcell_trng_remove(struct platform_device *pdev)
+static int picoxcell_trng_remove(struct platform_device *pdev)
{
hwrng_unregister(&picoxcell_trng);
clk_disable(rng_clk);
diff --git a/drivers/char/hw_random/ppc4xx-rng.c b/drivers/char/hw_random/ppc4xx-rng.c
index c51762c..af6506a 100644
--- a/drivers/char/hw_random/ppc4xx-rng.c
+++ b/drivers/char/hw_random/ppc4xx-rng.c
@@ -111,7 +111,7 @@
return err;
}
-static int __devexit ppc4xx_rng_remove(struct platform_device *dev)
+static int ppc4xx_rng_remove(struct platform_device *dev)
{
void __iomem *rng_regs = (void __iomem *) ppc4xx_rng.priv;
diff --git a/drivers/char/hw_random/timeriomem-rng.c b/drivers/char/hw_random/timeriomem-rng.c
index f1a1618..3a1abc9 100644
--- a/drivers/char/hw_random/timeriomem-rng.c
+++ b/drivers/char/hw_random/timeriomem-rng.c
@@ -130,7 +130,7 @@
return ret;
}
-static int __devexit timeriomem_rng_remove(struct platform_device *pdev)
+static int timeriomem_rng_remove(struct platform_device *pdev)
{
del_timer_sync(&timeriomem_rng_timer);
hwrng_unregister(&timeriomem_rng_ops);
diff --git a/drivers/char/hw_random/virtio-rng.c b/drivers/char/hw_random/virtio-rng.c
index 5708299..621f595 100644
--- a/drivers/char/hw_random/virtio-rng.c
+++ b/drivers/char/hw_random/virtio-rng.c
@@ -119,7 +119,7 @@
return probe_common(vdev);
}
-static void __devexit virtrng_remove(struct virtio_device *vdev)
+static void virtrng_remove(struct virtio_device *vdev)
{
remove_common(vdev);
}
diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
index 32a6c7e..20ab5b3 100644
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -1836,7 +1836,7 @@
return rv;
}
-static int __devinit hardcode_find_bmc(void)
+static int hardcode_find_bmc(void)
{
int ret = -ENODEV;
int i;
@@ -2023,7 +2023,7 @@
s8 spmi_id[1]; /* A '\0' terminated array starts here. */
};
-static int __devinit try_init_spmi(struct SPMITable *spmi)
+static int try_init_spmi(struct SPMITable *spmi)
{
struct smi_info *info;
@@ -2106,7 +2106,7 @@
return 0;
}
-static void __devinit spmi_find_bmc(void)
+static void spmi_find_bmc(void)
{
acpi_status status;
struct SPMITable *spmi;
@@ -2128,7 +2128,7 @@
}
}
-static int __devinit ipmi_pnp_probe(struct pnp_dev *dev,
+static int ipmi_pnp_probe(struct pnp_dev *dev,
const struct pnp_device_id *dev_id)
{
struct acpi_device *acpi_dev;
@@ -2228,7 +2228,7 @@
return -EINVAL;
}
-static void __devexit ipmi_pnp_remove(struct pnp_dev *dev)
+static void ipmi_pnp_remove(struct pnp_dev *dev)
{
struct smi_info *info = pnp_get_drvdata(dev);
@@ -2258,7 +2258,7 @@
u8 slave_addr;
};
-static int __devinit decode_dmi(const struct dmi_header *dm,
+static int decode_dmi(const struct dmi_header *dm,
struct dmi_ipmi_data *dmi)
{
const u8 *data = (const u8 *)dm;
@@ -2320,7 +2320,7 @@
return 0;
}
-static void __devinit try_init_dmi(struct dmi_ipmi_data *ipmi_data)
+static void try_init_dmi(struct dmi_ipmi_data *ipmi_data)
{
struct smi_info *info;
@@ -2388,7 +2388,7 @@
kfree(info);
}
-static void __devinit dmi_find_bmc(void)
+static void dmi_find_bmc(void)
{
const struct dmi_device *dev = NULL;
struct dmi_ipmi_data data;
@@ -2424,7 +2424,7 @@
pci_disable_device(pdev);
}
-static int __devinit ipmi_pci_probe_regspacing(struct smi_info *info)
+static int ipmi_pci_probe_regspacing(struct smi_info *info)
{
if (info->si_type == SI_KCS) {
unsigned char status;
@@ -2456,7 +2456,7 @@
return DEFAULT_REGSPACING;
}
-static int __devinit ipmi_pci_probe(struct pci_dev *pdev,
+static int ipmi_pci_probe(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
int rv;
@@ -2529,7 +2529,7 @@
return 0;
}
-static void __devexit ipmi_pci_remove(struct pci_dev *pdev)
+static void ipmi_pci_remove(struct pci_dev *pdev)
{
struct smi_info *info = pci_get_drvdata(pdev);
cleanup_one_si(info);
@@ -2551,7 +2551,7 @@
#endif /* CONFIG_PCI */
static struct of_device_id ipmi_match[];
-static int __devinit ipmi_probe(struct platform_device *dev)
+static int ipmi_probe(struct platform_device *dev)
{
#ifdef CONFIG_OF
const struct of_device_id *match;
@@ -2635,7 +2635,7 @@
return 0;
}
-static int __devexit ipmi_remove(struct platform_device *dev)
+static int ipmi_remove(struct platform_device *dev)
{
#ifdef CONFIG_OF
cleanup_one_si(dev_get_drvdata(&dev->dev));
@@ -3047,7 +3047,7 @@
}
}
-static __devinitdata struct ipmi_default_vals
+static struct ipmi_default_vals
{
int type;
int port;
@@ -3059,7 +3059,7 @@
{ .port = 0 }
};
-static void __devinit default_find_bmc(void)
+static void default_find_bmc(void)
{
struct smi_info *info;
int i;
@@ -3359,7 +3359,7 @@
return rv;
}
-static int __devinit init_ipmi_si(void)
+static int init_ipmi_si(void)
{
int i;
char *str;
diff --git a/drivers/char/mbcs.c b/drivers/char/mbcs.c
index f74e892..e5d3e3f 100644
--- a/drivers/char/mbcs.c
+++ b/drivers/char/mbcs.c
@@ -799,7 +799,7 @@
return 0;
}
-static const struct cx_device_id __devinitconst mbcs_id_table[] = {
+static const struct cx_device_id mbcs_id_table[] = {
{
.part_num = MBCS_PART_NUM,
.mfg_num = MBCS_MFG_NUM,
diff --git a/drivers/char/mem.c b/drivers/char/mem.c
index 0537903..c6fa3bc 100644
--- a/drivers/char/mem.c
+++ b/drivers/char/mem.c
@@ -48,7 +48,7 @@
}
#ifndef ARCH_HAS_VALID_PHYS_ADDR_RANGE
-static inline int valid_phys_addr_range(unsigned long addr, size_t count)
+static inline int valid_phys_addr_range(phys_addr_t addr, size_t count)
{
return addr + count <= __pa(high_memory);
}
@@ -96,7 +96,7 @@
static ssize_t read_mem(struct file *file, char __user *buf,
size_t count, loff_t *ppos)
{
- unsigned long p = *ppos;
+ phys_addr_t p = *ppos;
ssize_t read, sz;
char *ptr;
@@ -153,7 +153,7 @@
static ssize_t write_mem(struct file *file, const char __user *buf,
size_t count, loff_t *ppos)
{
- unsigned long p = *ppos;
+ phys_addr_t p = *ppos;
ssize_t written, sz;
unsigned long copied;
void *ptr;
@@ -226,7 +226,7 @@
*
*/
#ifdef pgprot_noncached
-static int uncached_access(struct file *file, unsigned long addr)
+static int uncached_access(struct file *file, phys_addr_t addr)
{
#if defined(CONFIG_IA64)
/*
@@ -258,7 +258,7 @@
unsigned long size, pgprot_t vma_prot)
{
#ifdef pgprot_noncached
- unsigned long offset = pfn << PAGE_SHIFT;
+ phys_addr_t offset = pfn << PAGE_SHIFT;
if (uncached_access(file, offset))
return pgprot_noncached(vma_prot);
diff --git a/drivers/char/pc8736x_gpio.c b/drivers/char/pc8736x_gpio.c
index b304ec0..3f79a9f 100644
--- a/drivers/char/pc8736x_gpio.c
+++ b/drivers/char/pc8736x_gpio.c
@@ -345,8 +345,7 @@
unregister_chrdev_region(MKDEV(major,0), PC8736X_GPIO_CT);
release_region(pc8736x_gpio_base, PC8736X_GPIO_RANGE);
- platform_device_del(pdev);
- platform_device_put(pdev);
+ platform_device_unregister(pdev);
}
module_init(pc8736x_gpio_init);
diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c
index 21721d2..b66eaa0 100644
--- a/drivers/char/pcmcia/synclink_cs.c
+++ b/drivers/char/pcmcia/synclink_cs.c
@@ -549,8 +549,10 @@
/* Initialize the struct pcmcia_device structure */
ret = mgslpc_config(link);
- if (ret)
+ if (ret) {
+ tty_port_destroy(&info->port);
return ret;
+ }
mgslpc_add_device(info);
@@ -2757,6 +2759,7 @@
hdlcdev_exit(info);
#endif
release_resources(info);
+ tty_port_destroy(&info->port);
kfree(info);
mgslpc_device_count--;
return;
diff --git a/drivers/char/ps3flash.c b/drivers/char/ps3flash.c
index 6abdde4..588063ac 100644
--- a/drivers/char/ps3flash.c
+++ b/drivers/char/ps3flash.c
@@ -363,7 +363,7 @@
.fops = &ps3flash_fops,
};
-static int __devinit ps3flash_probe(struct ps3_system_bus_device *_dev)
+static int ps3flash_probe(struct ps3_system_bus_device *_dev)
{
struct ps3_storage_device *dev = to_ps3_storage_device(&_dev->core);
struct ps3flash_private *priv;
diff --git a/drivers/char/sonypi.c b/drivers/char/sonypi.c
index 9b4f011..d780295 100644
--- a/drivers/char/sonypi.c
+++ b/drivers/char/sonypi.c
@@ -1164,7 +1164,7 @@
};
#endif
-static int __devinit sonypi_create_input_devices(struct platform_device *pdev)
+static int sonypi_create_input_devices(struct platform_device *pdev)
{
struct input_dev *jog_dev;
struct input_dev *key_dev;
@@ -1225,7 +1225,7 @@
return error;
}
-static int __devinit sonypi_setup_ioports(struct sonypi_device *dev,
+static int sonypi_setup_ioports(struct sonypi_device *dev,
const struct sonypi_ioport_list *ioport_list)
{
/* try to detect if sony-laptop is being used and thus
@@ -1265,7 +1265,7 @@
return -EBUSY;
}
-static int __devinit sonypi_setup_irq(struct sonypi_device *dev,
+static int sonypi_setup_irq(struct sonypi_device *dev,
const struct sonypi_irq_list *irq_list)
{
while (irq_list->irq) {
@@ -1282,7 +1282,7 @@
return -EBUSY;
}
-static void __devinit sonypi_display_info(void)
+static void sonypi_display_info(void)
{
printk(KERN_INFO "sonypi: detected type%d model, "
"verbose = %d, fnkeyinit = %s, camera = %s, "
@@ -1304,7 +1304,7 @@
sonypi_misc_device.minor);
}
-static int __devinit sonypi_probe(struct platform_device *dev)
+static int sonypi_probe(struct platform_device *dev)
{
const struct sonypi_ioport_list *ioport_list;
const struct sonypi_irq_list *irq_list;
@@ -1428,7 +1428,7 @@
return error;
}
-static int __devexit sonypi_remove(struct platform_device *dev)
+static int sonypi_remove(struct platform_device *dev)
{
sonypi_disable();
@@ -1491,7 +1491,7 @@
.pm = SONYPI_PM,
},
.probe = sonypi_probe,
- .remove = __devexit_p(sonypi_remove),
+ .remove = sonypi_remove,
.shutdown = sonypi_shutdown,
};
diff --git a/drivers/char/tb0219.c b/drivers/char/tb0219.c
index ad26418..34c63f8 100644
--- a/drivers/char/tb0219.c
+++ b/drivers/char/tb0219.c
@@ -284,7 +284,7 @@
vr41xx_set_irq_level(TB0219_PCI_SLOT3_PIN, IRQ_LEVEL_LOW);
}
-static int __devinit tb0219_probe(struct platform_device *dev)
+static int tb0219_probe(struct platform_device *dev)
{
int retval;
@@ -318,7 +318,7 @@
return 0;
}
-static int __devexit tb0219_remove(struct platform_device *dev)
+static int tb0219_remove(struct platform_device *dev)
{
_machine_restart = old_machine_restart;
@@ -334,7 +334,7 @@
static struct platform_driver tb0219_device_driver = {
.probe = tb0219_probe,
- .remove = __devexit_p(tb0219_remove),
+ .remove = tb0219_remove,
.driver = {
.name = "TB0219",
.owner = THIS_MODULE,
diff --git a/drivers/char/tpm/tpm_i2c_infineon.c b/drivers/char/tpm/tpm_i2c_infineon.c
index 5a831ae..fb447bd 100644
--- a/drivers/char/tpm/tpm_i2c_infineon.c
+++ b/drivers/char/tpm/tpm_i2c_infineon.c
@@ -555,7 +555,7 @@
.miscdev.fops = &tis_ops,
};
-static int __devinit tpm_tis_i2c_init(struct device *dev)
+static int tpm_tis_i2c_init(struct device *dev)
{
u32 vendor;
int rc = 0;
@@ -632,7 +632,7 @@
MODULE_DEVICE_TABLE(i2c, tpm_tis_i2c_table);
static SIMPLE_DEV_PM_OPS(tpm_tis_i2c_ops, tpm_pm_suspend, tpm_pm_resume);
-static int __devinit tpm_tis_i2c_probe(struct i2c_client *client,
+static int tpm_tis_i2c_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
int rc;
@@ -656,7 +656,7 @@
return rc;
}
-static int __devexit tpm_tis_i2c_remove(struct i2c_client *client)
+static int tpm_tis_i2c_remove(struct i2c_client *client)
{
struct tpm_chip *chip = tpm_dev.chip;
release_locality(chip, chip->vendor.locality, 1);
diff --git a/drivers/char/tpm/tpm_ibmvtpm.c b/drivers/char/tpm/tpm_ibmvtpm.c
index efc4ab3..7da840d 100644
--- a/drivers/char/tpm/tpm_ibmvtpm.c
+++ b/drivers/char/tpm/tpm_ibmvtpm.c
@@ -32,7 +32,7 @@
static const char tpm_ibmvtpm_driver_name[] = "tpm_ibmvtpm";
-static struct vio_device_id tpm_ibmvtpm_device_table[] __devinitdata = {
+static struct vio_device_id tpm_ibmvtpm_device_table[] = {
{ "IBM,vtpm", "IBM,vtpm"},
{ "", "" }
};
@@ -267,7 +267,7 @@
* Return value:
* 0
*/
-static int __devexit tpm_ibmvtpm_remove(struct vio_dev *vdev)
+static int tpm_ibmvtpm_remove(struct vio_dev *vdev)
{
struct ibmvtpm_dev *ibmvtpm = ibmvtpm_get_data(&vdev->dev);
int rc = 0;
@@ -602,7 +602,7 @@
* 0 - Success
* Non-zero - Failure
*/
-static int __devinit tpm_ibmvtpm_probe(struct vio_dev *vio_dev,
+static int tpm_ibmvtpm_probe(struct vio_dev *vio_dev,
const struct vio_device_id *id)
{
struct ibmvtpm_dev *ibmvtpm;
diff --git a/drivers/char/tpm/tpm_infineon.c b/drivers/char/tpm/tpm_infineon.c
index 3251a44..2b480c2 100644
--- a/drivers/char/tpm/tpm_infineon.c
+++ b/drivers/char/tpm/tpm_infineon.c
@@ -415,7 +415,7 @@
MODULE_DEVICE_TABLE(pnp, tpm_inf_pnp_tbl);
-static int __devinit tpm_inf_pnp_probe(struct pnp_dev *dev,
+static int tpm_inf_pnp_probe(struct pnp_dev *dev,
const struct pnp_device_id *dev_id)
{
int rc = 0;
@@ -594,7 +594,7 @@
return rc;
}
-static __devexit void tpm_inf_pnp_remove(struct pnp_dev *dev)
+static void tpm_inf_pnp_remove(struct pnp_dev *dev)
{
struct tpm_chip *chip = pnp_get_drvdata(dev);
@@ -655,7 +655,7 @@
.probe = tpm_inf_pnp_probe,
.suspend = tpm_inf_pnp_suspend,
.resume = tpm_inf_pnp_resume,
- .remove = __devexit_p(tpm_inf_pnp_remove)
+ .remove = tpm_inf_pnp_remove
};
static int __init init_inf(void)
diff --git a/drivers/char/tpm/tpm_tis.c b/drivers/char/tpm/tpm_tis.c
index 6bdf267..ea31daf 100644
--- a/drivers/char/tpm/tpm_tis.c
+++ b/drivers/char/tpm/tpm_tis.c
@@ -729,7 +729,7 @@
#endif
#ifdef CONFIG_PNP
-static int __devinit tpm_tis_pnp_init(struct pnp_dev *pnp_dev,
+static int tpm_tis_pnp_init(struct pnp_dev *pnp_dev,
const struct pnp_device_id *pnp_id)
{
resource_size_t start, len;
@@ -769,7 +769,7 @@
return ret;
}
-static struct pnp_device_id tpm_pnp_tbl[] __devinitdata = {
+static struct pnp_device_id tpm_pnp_tbl[] = {
{"PNP0C31", 0}, /* TPM */
{"ATM1200", 0}, /* Atmel */
{"IFX0102", 0}, /* Infineon */
@@ -783,7 +783,7 @@
};
MODULE_DEVICE_TABLE(pnp, tpm_pnp_tbl);
-static __devexit void tpm_tis_pnp_remove(struct pnp_dev *dev)
+static void tpm_tis_pnp_remove(struct pnp_dev *dev)
{
struct tpm_chip *chip = pnp_get_drvdata(dev);
diff --git a/drivers/char/ttyprintk.c b/drivers/char/ttyprintk.c
index af98f6d..4945bd3 100644
--- a/drivers/char/ttyprintk.c
+++ b/drivers/char/ttyprintk.c
@@ -179,7 +179,6 @@
{
int ret = -ENOMEM;
- tty_port_init(&tpk_port.port);
tpk_port.port.ops = &null_ops;
mutex_init(&tpk_port.port_write_mutex);
@@ -190,6 +189,8 @@
if (IS_ERR(ttyprintk_driver))
return PTR_ERR(ttyprintk_driver);
+ tty_port_init(&tpk_port.port);
+
ttyprintk_driver->driver_name = "ttyprintk";
ttyprintk_driver->name = "ttyprintk";
ttyprintk_driver->major = TTYAUX_MAJOR;
@@ -211,6 +212,7 @@
error:
tty_unregister_driver(ttyprintk_driver);
put_tty_driver(ttyprintk_driver);
+ tty_port_destroy(&tpk_port.port);
ttyprintk_driver = NULL;
return ret;
}
diff --git a/drivers/char/virtio_console.c b/drivers/char/virtio_console.c
index 8ab9c3d..90493d4 100644
--- a/drivers/char/virtio_console.c
+++ b/drivers/char/virtio_console.c
@@ -1846,7 +1846,7 @@
* config space to see how many ports the host has spawned. We
* initialize each port found.
*/
-static int __devinit virtcons_probe(struct virtio_device *vdev)
+static int virtcons_probe(struct virtio_device *vdev)
{
struct ports_device *portdev;
int err;
diff --git a/drivers/char/xilinx_hwicap/xilinx_hwicap.c b/drivers/char/xilinx_hwicap/xilinx_hwicap.c
index 2c5d15b..5224da5 100644
--- a/drivers/char/xilinx_hwicap/xilinx_hwicap.c
+++ b/drivers/char/xilinx_hwicap/xilinx_hwicap.c
@@ -595,7 +595,7 @@
.llseek = noop_llseek,
};
-static int __devinit hwicap_setup(struct device *dev, int id,
+static int hwicap_setup(struct device *dev, int id,
const struct resource *regs_res,
const struct hwicap_driver_config *config,
const struct config_registers *config_regs)
@@ -717,7 +717,7 @@
.reset = fifo_icap_reset,
};
-static int __devexit hwicap_remove(struct device *dev)
+static int hwicap_remove(struct device *dev)
{
struct hwicap_drvdata *drvdata;
@@ -740,7 +740,7 @@
}
#ifdef CONFIG_OF
-static int __devinit hwicap_of_probe(struct platform_device *op,
+static int hwicap_of_probe(struct platform_device *op,
const struct hwicap_driver_config *config)
{
struct resource res;
@@ -785,8 +785,8 @@
}
#endif /* CONFIG_OF */
-static const struct of_device_id __devinitconst hwicap_of_match[];
-static int __devinit hwicap_drv_probe(struct platform_device *pdev)
+static const struct of_device_id hwicap_of_match[];
+static int hwicap_drv_probe(struct platform_device *pdev)
{
const struct of_device_id *match;
struct resource *res;
@@ -822,14 +822,14 @@
&buffer_icap_config, regs);
}
-static int __devexit hwicap_drv_remove(struct platform_device *pdev)
+static int hwicap_drv_remove(struct platform_device *pdev)
{
return hwicap_remove(&pdev->dev);
}
#ifdef CONFIG_OF
/* Match table for device tree binding */
-static const struct of_device_id __devinitconst hwicap_of_match[] = {
+static const struct of_device_id hwicap_of_match[] = {
{ .compatible = "xlnx,opb-hwicap-1.00.b", .data = &buffer_icap_config},
{ .compatible = "xlnx,xps-hwicap-1.00.a", .data = &fifo_icap_config},
{},
diff --git a/drivers/clk/clk-max77686.c b/drivers/clk/clk-max77686.c
index ac5f543..d098f72 100644
--- a/drivers/clk/clk-max77686.c
+++ b/drivers/clk/clk-max77686.c
@@ -143,7 +143,7 @@
return 0;
}
-static __devinit int max77686_clk_probe(struct platform_device *pdev)
+static int max77686_clk_probe(struct platform_device *pdev)
{
struct max77686_dev *iodev = dev_get_drvdata(pdev->dev.parent);
struct max77686_clk **max77686_clks;
@@ -199,7 +199,7 @@
return ret;
}
-static int __devexit max77686_clk_remove(struct platform_device *pdev)
+static int max77686_clk_remove(struct platform_device *pdev)
{
struct max77686_clk **max77686_clks = platform_get_drvdata(pdev);
int i;
@@ -223,7 +223,7 @@
.owner = THIS_MODULE,
},
.probe = max77686_clk_probe,
- .remove = __devexit_p(max77686_clk_remove),
+ .remove = max77686_clk_remove,
.id_table = max77686_clk_id,
};
diff --git a/drivers/clk/clk-wm831x.c b/drivers/clk/clk-wm831x.c
index db4fbf2..16ed068 100644
--- a/drivers/clk/clk-wm831x.c
+++ b/drivers/clk/clk-wm831x.c
@@ -350,7 +350,7 @@
.flags = CLK_SET_RATE_PARENT,
};
-static __devinit int wm831x_clk_probe(struct platform_device *pdev)
+static int wm831x_clk_probe(struct platform_device *pdev)
{
struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
struct wm831x_clk *clkdata;
@@ -389,14 +389,14 @@
return 0;
}
-static int __devexit wm831x_clk_remove(struct platform_device *pdev)
+static int wm831x_clk_remove(struct platform_device *pdev)
{
return 0;
}
static struct platform_driver wm831x_clk_driver = {
.probe = wm831x_clk_probe,
- .remove = __devexit_p(wm831x_clk_remove),
+ .remove = wm831x_clk_remove,
.driver = {
.name = "wm831x-clk",
.owner = THIS_MODULE,
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index 5961e64..a0b3661 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -76,3 +76,10 @@
help
This adds the CPUFreq driver for Samsung EXYNOS5250
SoC.
+
+config ARM_SPEAR_CPUFREQ
+ bool "SPEAr CPUFreq support"
+ depends on PLAT_SPEAR
+ default y
+ help
+ This adds the CPUFreq driver support for SPEAr SOCs.
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index 1bc90e1..1f254ec0 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -7,8 +7,8 @@
obj-$(CONFIG_CPU_FREQ_GOV_PERFORMANCE) += cpufreq_performance.o
obj-$(CONFIG_CPU_FREQ_GOV_POWERSAVE) += cpufreq_powersave.o
obj-$(CONFIG_CPU_FREQ_GOV_USERSPACE) += cpufreq_userspace.o
-obj-$(CONFIG_CPU_FREQ_GOV_ONDEMAND) += cpufreq_ondemand.o
-obj-$(CONFIG_CPU_FREQ_GOV_CONSERVATIVE) += cpufreq_conservative.o
+obj-$(CONFIG_CPU_FREQ_GOV_ONDEMAND) += cpufreq_ondemand.o cpufreq_governor.o
+obj-$(CONFIG_CPU_FREQ_GOV_CONSERVATIVE) += cpufreq_conservative.o cpufreq_governor.o
# CPUfreq cross-arch helpers
obj-$(CONFIG_CPU_FREQ_TABLE) += freq_table.o
@@ -50,6 +50,7 @@
obj-$(CONFIG_ARM_EXYNOS4X12_CPUFREQ) += exynos4x12-cpufreq.o
obj-$(CONFIG_ARM_EXYNOS5250_CPUFREQ) += exynos5250-cpufreq.o
obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ) += omap-cpufreq.o
+obj-$(CONFIG_ARM_SPEAR_CPUFREQ) += spear-cpufreq.o
##################################################################################
# PowerPC platform drivers
diff --git a/drivers/cpufreq/cpufreq-cpu0.c b/drivers/cpufreq/cpufreq-cpu0.c
index e915827..52bf36d 100644
--- a/drivers/cpufreq/cpufreq-cpu0.c
+++ b/drivers/cpufreq/cpufreq-cpu0.c
@@ -174,7 +174,7 @@
.attr = cpu0_cpufreq_attr,
};
-static int __devinit cpu0_cpufreq_driver_init(void)
+static int cpu0_cpufreq_driver_init(void)
{
struct device_node *np;
int ret;
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index fb8a527..1f93dbd 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -15,6 +15,8 @@
*
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
@@ -127,7 +129,7 @@
pure_initcall(init_cpufreq_transition_notifier_list);
static int off __read_mostly;
-int cpufreq_disabled(void)
+static int cpufreq_disabled(void)
{
return off;
}
@@ -402,7 +404,7 @@
static ssize_t store_##file_name \
(struct cpufreq_policy *policy, const char *buf, size_t count) \
{ \
- unsigned int ret = -EINVAL; \
+ unsigned int ret; \
struct cpufreq_policy new_policy; \
\
ret = cpufreq_get_policy(&new_policy, policy->cpu); \
@@ -445,7 +447,7 @@
else if (policy->policy == CPUFREQ_POLICY_PERFORMANCE)
return sprintf(buf, "performance\n");
else if (policy->governor)
- return scnprintf(buf, CPUFREQ_NAME_LEN, "%s\n",
+ return scnprintf(buf, CPUFREQ_NAME_PLEN, "%s\n",
policy->governor->name);
return -EINVAL;
}
@@ -457,7 +459,7 @@
static ssize_t store_scaling_governor(struct cpufreq_policy *policy,
const char *buf, size_t count)
{
- unsigned int ret = -EINVAL;
+ unsigned int ret;
char str_governor[16];
struct cpufreq_policy new_policy;
@@ -491,7 +493,7 @@
*/
static ssize_t show_scaling_driver(struct cpufreq_policy *policy, char *buf)
{
- return scnprintf(buf, CPUFREQ_NAME_LEN, "%s\n", cpufreq_driver->name);
+ return scnprintf(buf, CPUFREQ_NAME_PLEN, "%s\n", cpufreq_driver->name);
}
/**
@@ -512,7 +514,7 @@
if (i >= (ssize_t) ((PAGE_SIZE / sizeof(char))
- (CPUFREQ_NAME_LEN + 2)))
goto out;
- i += scnprintf(&buf[i], CPUFREQ_NAME_LEN, "%s ", t->name);
+ i += scnprintf(&buf[i], CPUFREQ_NAME_PLEN, "%s ", t->name);
}
out:
i += sprintf(&buf[i], "\n");
@@ -581,7 +583,7 @@
}
/**
- * show_scaling_driver - show the current cpufreq HW/BIOS limitation
+ * show_bios_limit - show the current cpufreq HW/BIOS limitation
*/
static ssize_t show_bios_limit(struct cpufreq_policy *policy, char *buf)
{
@@ -1468,12 +1470,23 @@
unsigned int relation)
{
int retval = -EINVAL;
+ unsigned int old_target_freq = target_freq;
if (cpufreq_disabled())
return -ENODEV;
- pr_debug("target for CPU %u: %u kHz, relation %u\n", policy->cpu,
- target_freq, relation);
+ /* Make sure that target_freq is within supported range */
+ if (target_freq > policy->max)
+ target_freq = policy->max;
+ if (target_freq < policy->min)
+ target_freq = policy->min;
+
+ pr_debug("target for CPU %u: %u kHz, relation %u, requested %u kHz\n",
+ policy->cpu, target_freq, relation, old_target_freq);
+
+ if (target_freq == policy->cur)
+ return 0;
+
if (cpu_online(policy->cpu) && cpufreq_driver->target)
retval = cpufreq_driver->target(policy, target_freq, relation);
@@ -1509,12 +1522,14 @@
{
int ret = 0;
+ if (!(cpu_online(cpu) && cpufreq_driver->getavg))
+ return 0;
+
policy = cpufreq_cpu_get(policy->cpu);
if (!policy)
return -EINVAL;
- if (cpu_online(cpu) && cpufreq_driver->getavg)
- ret = cpufreq_driver->getavg(policy, cpu);
+ ret = cpufreq_driver->getavg(policy, cpu);
cpufreq_cpu_put(policy);
return ret;
diff --git a/drivers/cpufreq/cpufreq_conservative.c b/drivers/cpufreq/cpufreq_conservative.c
index a152af7..64ef737 100644
--- a/drivers/cpufreq/cpufreq_conservative.c
+++ b/drivers/cpufreq/cpufreq_conservative.c
@@ -11,83 +11,30 @@
* published by the Free Software Foundation.
*/
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
#include <linux/cpufreq.h>
-#include <linux/cpu.h>
-#include <linux/jiffies.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
#include <linux/kernel_stat.h>
+#include <linux/kobject.h>
+#include <linux/module.h>
#include <linux/mutex.h>
-#include <linux/hrtimer.h>
-#include <linux/tick.h>
-#include <linux/ktime.h>
-#include <linux/sched.h>
+#include <linux/notifier.h>
+#include <linux/percpu-defs.h>
+#include <linux/sysfs.h>
+#include <linux/types.h>
-/*
- * dbs is used in this file as a shortform for demandbased switching
- * It helps to keep variable names smaller, simpler
- */
+#include "cpufreq_governor.h"
+/* Conservative governor macors */
#define DEF_FREQUENCY_UP_THRESHOLD (80)
#define DEF_FREQUENCY_DOWN_THRESHOLD (20)
-
-/*
- * The polling frequency of this governor depends on the capability of
- * the processor. Default polling frequency is 1000 times the transition
- * latency of the processor. The governor will work on any processor with
- * transition latency <= 10mS, using appropriate sampling
- * rate.
- * For CPUs with transition latency > 10mS (mostly drivers with CPUFREQ_ETERNAL)
- * this governor will not work.
- * All times here are in uS.
- */
-#define MIN_SAMPLING_RATE_RATIO (2)
-
-static unsigned int min_sampling_rate;
-
-#define LATENCY_MULTIPLIER (1000)
-#define MIN_LATENCY_MULTIPLIER (100)
#define DEF_SAMPLING_DOWN_FACTOR (1)
#define MAX_SAMPLING_DOWN_FACTOR (10)
-#define TRANSITION_LATENCY_LIMIT (10 * 1000 * 1000)
-static void do_dbs_timer(struct work_struct *work);
+static struct dbs_data cs_dbs_data;
+static DEFINE_PER_CPU(struct cs_cpu_dbs_info_s, cs_cpu_dbs_info);
-struct cpu_dbs_info_s {
- cputime64_t prev_cpu_idle;
- cputime64_t prev_cpu_wall;
- cputime64_t prev_cpu_nice;
- struct cpufreq_policy *cur_policy;
- struct delayed_work work;
- unsigned int down_skip;
- unsigned int requested_freq;
- int cpu;
- unsigned int enable:1;
- /*
- * percpu mutex that serializes governor limit change with
- * do_dbs_timer invocation. We do not want do_dbs_timer to run
- * when user is changing the governor or limits.
- */
- struct mutex timer_mutex;
-};
-static DEFINE_PER_CPU(struct cpu_dbs_info_s, cs_cpu_dbs_info);
-
-static unsigned int dbs_enable; /* number of CPUs using this policy */
-
-/*
- * dbs_mutex protects dbs_enable in governor start/stop.
- */
-static DEFINE_MUTEX(dbs_mutex);
-
-static struct dbs_tuners {
- unsigned int sampling_rate;
- unsigned int sampling_down_factor;
- unsigned int up_threshold;
- unsigned int down_threshold;
- unsigned int ignore_nice;
- unsigned int freq_step;
-} dbs_tuners_ins = {
+static struct cs_dbs_tuners cs_tuners = {
.up_threshold = DEF_FREQUENCY_UP_THRESHOLD,
.down_threshold = DEF_FREQUENCY_DOWN_THRESHOLD,
.sampling_down_factor = DEF_SAMPLING_DOWN_FACTOR,
@@ -95,95 +42,121 @@
.freq_step = 5,
};
-static inline u64 get_cpu_idle_time_jiffy(unsigned int cpu, u64 *wall)
+/*
+ * Every sampling_rate, we check, if current idle time is less than 20%
+ * (default), then we try to increase frequency Every sampling_rate *
+ * sampling_down_factor, we check, if current idle time is more than 80%, then
+ * we try to decrease frequency
+ *
+ * Any frequency increase takes it to the maximum frequency. Frequency reduction
+ * happens at minimum steps of 5% (default) of maximum frequency
+ */
+static void cs_check_cpu(int cpu, unsigned int load)
{
- u64 idle_time;
- u64 cur_wall_time;
- u64 busy_time;
-
- cur_wall_time = jiffies64_to_cputime64(get_jiffies_64());
-
- busy_time = kcpustat_cpu(cpu).cpustat[CPUTIME_USER];
- busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_SYSTEM];
- busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_IRQ];
- busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_SOFTIRQ];
- busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_STEAL];
- busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_NICE];
-
- idle_time = cur_wall_time - busy_time;
- if (wall)
- *wall = jiffies_to_usecs(cur_wall_time);
-
- return jiffies_to_usecs(idle_time);
-}
-
-static inline cputime64_t get_cpu_idle_time(unsigned int cpu, cputime64_t *wall)
-{
- u64 idle_time = get_cpu_idle_time_us(cpu, NULL);
-
- if (idle_time == -1ULL)
- return get_cpu_idle_time_jiffy(cpu, wall);
- else
- idle_time += get_cpu_iowait_time_us(cpu, wall);
-
- return idle_time;
-}
-
-/* keep track of frequency transitions */
-static int
-dbs_cpufreq_notifier(struct notifier_block *nb, unsigned long val,
- void *data)
-{
- struct cpufreq_freqs *freq = data;
- struct cpu_dbs_info_s *this_dbs_info = &per_cpu(cs_cpu_dbs_info,
- freq->cpu);
-
- struct cpufreq_policy *policy;
-
- if (!this_dbs_info->enable)
- return 0;
-
- policy = this_dbs_info->cur_policy;
+ struct cs_cpu_dbs_info_s *dbs_info = &per_cpu(cs_cpu_dbs_info, cpu);
+ struct cpufreq_policy *policy = dbs_info->cdbs.cur_policy;
+ unsigned int freq_target;
/*
- * we only care if our internally tracked freq moves outside
- * the 'valid' ranges of freqency available to us otherwise
- * we do not change it
+ * break out if we 'cannot' reduce the speed as the user might
+ * want freq_step to be zero
+ */
+ if (cs_tuners.freq_step == 0)
+ return;
+
+ /* Check for frequency increase */
+ if (load > cs_tuners.up_threshold) {
+ dbs_info->down_skip = 0;
+
+ /* if we are already at full speed then break out early */
+ if (dbs_info->requested_freq == policy->max)
+ return;
+
+ freq_target = (cs_tuners.freq_step * policy->max) / 100;
+
+ /* max freq cannot be less than 100. But who knows.... */
+ if (unlikely(freq_target == 0))
+ freq_target = 5;
+
+ dbs_info->requested_freq += freq_target;
+ if (dbs_info->requested_freq > policy->max)
+ dbs_info->requested_freq = policy->max;
+
+ __cpufreq_driver_target(policy, dbs_info->requested_freq,
+ CPUFREQ_RELATION_H);
+ return;
+ }
+
+ /*
+ * The optimal frequency is the frequency that is the lowest that can
+ * support the current CPU usage without triggering the up policy. To be
+ * safe, we focus 10 points under the threshold.
+ */
+ if (load < (cs_tuners.down_threshold - 10)) {
+ freq_target = (cs_tuners.freq_step * policy->max) / 100;
+
+ dbs_info->requested_freq -= freq_target;
+ if (dbs_info->requested_freq < policy->min)
+ dbs_info->requested_freq = policy->min;
+
+ /*
+ * if we cannot reduce the frequency anymore, break out early
+ */
+ if (policy->cur == policy->min)
+ return;
+
+ __cpufreq_driver_target(policy, dbs_info->requested_freq,
+ CPUFREQ_RELATION_H);
+ return;
+ }
+}
+
+static void cs_dbs_timer(struct work_struct *work)
+{
+ struct cs_cpu_dbs_info_s *dbs_info = container_of(work,
+ struct cs_cpu_dbs_info_s, cdbs.work.work);
+ unsigned int cpu = dbs_info->cdbs.cpu;
+ int delay = delay_for_sampling_rate(cs_tuners.sampling_rate);
+
+ mutex_lock(&dbs_info->cdbs.timer_mutex);
+
+ dbs_check_cpu(&cs_dbs_data, cpu);
+
+ schedule_delayed_work_on(cpu, &dbs_info->cdbs.work, delay);
+ mutex_unlock(&dbs_info->cdbs.timer_mutex);
+}
+
+static int dbs_cpufreq_notifier(struct notifier_block *nb, unsigned long val,
+ void *data)
+{
+ struct cpufreq_freqs *freq = data;
+ struct cs_cpu_dbs_info_s *dbs_info =
+ &per_cpu(cs_cpu_dbs_info, freq->cpu);
+ struct cpufreq_policy *policy;
+
+ if (!dbs_info->enable)
+ return 0;
+
+ policy = dbs_info->cdbs.cur_policy;
+
+ /*
+ * we only care if our internally tracked freq moves outside the 'valid'
+ * ranges of freqency available to us otherwise we do not change it
*/
- if (this_dbs_info->requested_freq > policy->max
- || this_dbs_info->requested_freq < policy->min)
- this_dbs_info->requested_freq = freq->new;
+ if (dbs_info->requested_freq > policy->max
+ || dbs_info->requested_freq < policy->min)
+ dbs_info->requested_freq = freq->new;
return 0;
}
-static struct notifier_block dbs_cpufreq_notifier_block = {
- .notifier_call = dbs_cpufreq_notifier
-};
-
/************************** sysfs interface ************************/
static ssize_t show_sampling_rate_min(struct kobject *kobj,
struct attribute *attr, char *buf)
{
- return sprintf(buf, "%u\n", min_sampling_rate);
+ return sprintf(buf, "%u\n", cs_dbs_data.min_sampling_rate);
}
-define_one_global_ro(sampling_rate_min);
-
-/* cpufreq_conservative Governor Tunables */
-#define show_one(file_name, object) \
-static ssize_t show_##file_name \
-(struct kobject *kobj, struct attribute *attr, char *buf) \
-{ \
- return sprintf(buf, "%u\n", dbs_tuners_ins.object); \
-}
-show_one(sampling_rate, sampling_rate);
-show_one(sampling_down_factor, sampling_down_factor);
-show_one(up_threshold, up_threshold);
-show_one(down_threshold, down_threshold);
-show_one(ignore_nice_load, ignore_nice);
-show_one(freq_step, freq_step);
-
static ssize_t store_sampling_down_factor(struct kobject *a,
struct attribute *b,
const char *buf, size_t count)
@@ -195,7 +168,7 @@
if (ret != 1 || input > MAX_SAMPLING_DOWN_FACTOR || input < 1)
return -EINVAL;
- dbs_tuners_ins.sampling_down_factor = input;
+ cs_tuners.sampling_down_factor = input;
return count;
}
@@ -209,7 +182,7 @@
if (ret != 1)
return -EINVAL;
- dbs_tuners_ins.sampling_rate = max(input, min_sampling_rate);
+ cs_tuners.sampling_rate = max(input, cs_dbs_data.min_sampling_rate);
return count;
}
@@ -220,11 +193,10 @@
int ret;
ret = sscanf(buf, "%u", &input);
- if (ret != 1 || input > 100 ||
- input <= dbs_tuners_ins.down_threshold)
+ if (ret != 1 || input > 100 || input <= cs_tuners.down_threshold)
return -EINVAL;
- dbs_tuners_ins.up_threshold = input;
+ cs_tuners.up_threshold = input;
return count;
}
@@ -237,21 +209,19 @@
/* cannot be lower than 11 otherwise freq will not fall */
if (ret != 1 || input < 11 || input > 100 ||
- input >= dbs_tuners_ins.up_threshold)
+ input >= cs_tuners.up_threshold)
return -EINVAL;
- dbs_tuners_ins.down_threshold = input;
+ cs_tuners.down_threshold = input;
return count;
}
static ssize_t store_ignore_nice_load(struct kobject *a, struct attribute *b,
const char *buf, size_t count)
{
- unsigned int input;
+ unsigned int input, j;
int ret;
- unsigned int j;
-
ret = sscanf(buf, "%u", &input);
if (ret != 1)
return -EINVAL;
@@ -259,19 +229,20 @@
if (input > 1)
input = 1;
- if (input == dbs_tuners_ins.ignore_nice) /* nothing to do */
+ if (input == cs_tuners.ignore_nice) /* nothing to do */
return count;
- dbs_tuners_ins.ignore_nice = input;
+ cs_tuners.ignore_nice = input;
/* we need to re-evaluate prev_cpu_idle */
for_each_online_cpu(j) {
- struct cpu_dbs_info_s *dbs_info;
+ struct cs_cpu_dbs_info_s *dbs_info;
dbs_info = &per_cpu(cs_cpu_dbs_info, j);
- dbs_info->prev_cpu_idle = get_cpu_idle_time(j,
- &dbs_info->prev_cpu_wall);
- if (dbs_tuners_ins.ignore_nice)
- dbs_info->prev_cpu_nice = kcpustat_cpu(j).cpustat[CPUTIME_NICE];
+ dbs_info->cdbs.prev_cpu_idle = get_cpu_idle_time(j,
+ &dbs_info->cdbs.prev_cpu_wall);
+ if (cs_tuners.ignore_nice)
+ dbs_info->cdbs.prev_cpu_nice =
+ kcpustat_cpu(j).cpustat[CPUTIME_NICE];
}
return count;
}
@@ -289,18 +260,28 @@
if (input > 100)
input = 100;
- /* no need to test here if freq_step is zero as the user might actually
- * want this, they would be crazy though :) */
- dbs_tuners_ins.freq_step = input;
+ /*
+ * no need to test here if freq_step is zero as the user might actually
+ * want this, they would be crazy though :)
+ */
+ cs_tuners.freq_step = input;
return count;
}
+show_one(cs, sampling_rate, sampling_rate);
+show_one(cs, sampling_down_factor, sampling_down_factor);
+show_one(cs, up_threshold, up_threshold);
+show_one(cs, down_threshold, down_threshold);
+show_one(cs, ignore_nice_load, ignore_nice);
+show_one(cs, freq_step, freq_step);
+
define_one_global_rw(sampling_rate);
define_one_global_rw(sampling_down_factor);
define_one_global_rw(up_threshold);
define_one_global_rw(down_threshold);
define_one_global_rw(ignore_nice_load);
define_one_global_rw(freq_step);
+define_one_global_ro(sampling_rate_min);
static struct attribute *dbs_attributes[] = {
&sampling_rate_min.attr,
@@ -313,283 +294,38 @@
NULL
};
-static struct attribute_group dbs_attr_group = {
+static struct attribute_group cs_attr_group = {
.attrs = dbs_attributes,
.name = "conservative",
};
/************************** sysfs end ************************/
-static void dbs_check_cpu(struct cpu_dbs_info_s *this_dbs_info)
-{
- unsigned int load = 0;
- unsigned int max_load = 0;
- unsigned int freq_target;
+define_get_cpu_dbs_routines(cs_cpu_dbs_info);
- struct cpufreq_policy *policy;
- unsigned int j;
+static struct notifier_block cs_cpufreq_notifier_block = {
+ .notifier_call = dbs_cpufreq_notifier,
+};
- policy = this_dbs_info->cur_policy;
+static struct cs_ops cs_ops = {
+ .notifier_block = &cs_cpufreq_notifier_block,
+};
- /*
- * Every sampling_rate, we check, if current idle time is less
- * than 20% (default), then we try to increase frequency
- * Every sampling_rate*sampling_down_factor, we check, if current
- * idle time is more than 80%, then we try to decrease frequency
- *
- * Any frequency increase takes it to the maximum frequency.
- * Frequency reduction happens at minimum steps of
- * 5% (default) of maximum frequency
- */
+static struct dbs_data cs_dbs_data = {
+ .governor = GOV_CONSERVATIVE,
+ .attr_group = &cs_attr_group,
+ .tuners = &cs_tuners,
+ .get_cpu_cdbs = get_cpu_cdbs,
+ .get_cpu_dbs_info_s = get_cpu_dbs_info_s,
+ .gov_dbs_timer = cs_dbs_timer,
+ .gov_check_cpu = cs_check_cpu,
+ .gov_ops = &cs_ops,
+};
- /* Get Absolute Load */
- for_each_cpu(j, policy->cpus) {
- struct cpu_dbs_info_s *j_dbs_info;
- cputime64_t cur_wall_time, cur_idle_time;
- unsigned int idle_time, wall_time;
-
- j_dbs_info = &per_cpu(cs_cpu_dbs_info, j);
-
- cur_idle_time = get_cpu_idle_time(j, &cur_wall_time);
-
- wall_time = (unsigned int)
- (cur_wall_time - j_dbs_info->prev_cpu_wall);
- j_dbs_info->prev_cpu_wall = cur_wall_time;
-
- idle_time = (unsigned int)
- (cur_idle_time - j_dbs_info->prev_cpu_idle);
- j_dbs_info->prev_cpu_idle = cur_idle_time;
-
- if (dbs_tuners_ins.ignore_nice) {
- u64 cur_nice;
- unsigned long cur_nice_jiffies;
-
- cur_nice = kcpustat_cpu(j).cpustat[CPUTIME_NICE] -
- j_dbs_info->prev_cpu_nice;
- /*
- * Assumption: nice time between sampling periods will
- * be less than 2^32 jiffies for 32 bit sys
- */
- cur_nice_jiffies = (unsigned long)
- cputime64_to_jiffies64(cur_nice);
-
- j_dbs_info->prev_cpu_nice = kcpustat_cpu(j).cpustat[CPUTIME_NICE];
- idle_time += jiffies_to_usecs(cur_nice_jiffies);
- }
-
- if (unlikely(!wall_time || wall_time < idle_time))
- continue;
-
- load = 100 * (wall_time - idle_time) / wall_time;
-
- if (load > max_load)
- max_load = load;
- }
-
- /*
- * break out if we 'cannot' reduce the speed as the user might
- * want freq_step to be zero
- */
- if (dbs_tuners_ins.freq_step == 0)
- return;
-
- /* Check for frequency increase */
- if (max_load > dbs_tuners_ins.up_threshold) {
- this_dbs_info->down_skip = 0;
-
- /* if we are already at full speed then break out early */
- if (this_dbs_info->requested_freq == policy->max)
- return;
-
- freq_target = (dbs_tuners_ins.freq_step * policy->max) / 100;
-
- /* max freq cannot be less than 100. But who knows.... */
- if (unlikely(freq_target == 0))
- freq_target = 5;
-
- this_dbs_info->requested_freq += freq_target;
- if (this_dbs_info->requested_freq > policy->max)
- this_dbs_info->requested_freq = policy->max;
-
- __cpufreq_driver_target(policy, this_dbs_info->requested_freq,
- CPUFREQ_RELATION_H);
- return;
- }
-
- /*
- * The optimal frequency is the frequency that is the lowest that
- * can support the current CPU usage without triggering the up
- * policy. To be safe, we focus 10 points under the threshold.
- */
- if (max_load < (dbs_tuners_ins.down_threshold - 10)) {
- freq_target = (dbs_tuners_ins.freq_step * policy->max) / 100;
-
- this_dbs_info->requested_freq -= freq_target;
- if (this_dbs_info->requested_freq < policy->min)
- this_dbs_info->requested_freq = policy->min;
-
- /*
- * if we cannot reduce the frequency anymore, break out early
- */
- if (policy->cur == policy->min)
- return;
-
- __cpufreq_driver_target(policy, this_dbs_info->requested_freq,
- CPUFREQ_RELATION_H);
- return;
- }
-}
-
-static void do_dbs_timer(struct work_struct *work)
-{
- struct cpu_dbs_info_s *dbs_info =
- container_of(work, struct cpu_dbs_info_s, work.work);
- unsigned int cpu = dbs_info->cpu;
-
- /* We want all CPUs to do sampling nearly on same jiffy */
- int delay = usecs_to_jiffies(dbs_tuners_ins.sampling_rate);
-
- delay -= jiffies % delay;
-
- mutex_lock(&dbs_info->timer_mutex);
-
- dbs_check_cpu(dbs_info);
-
- schedule_delayed_work_on(cpu, &dbs_info->work, delay);
- mutex_unlock(&dbs_info->timer_mutex);
-}
-
-static inline void dbs_timer_init(struct cpu_dbs_info_s *dbs_info)
-{
- /* We want all CPUs to do sampling nearly on same jiffy */
- int delay = usecs_to_jiffies(dbs_tuners_ins.sampling_rate);
- delay -= jiffies % delay;
-
- dbs_info->enable = 1;
- INIT_DEFERRABLE_WORK(&dbs_info->work, do_dbs_timer);
- schedule_delayed_work_on(dbs_info->cpu, &dbs_info->work, delay);
-}
-
-static inline void dbs_timer_exit(struct cpu_dbs_info_s *dbs_info)
-{
- dbs_info->enable = 0;
- cancel_delayed_work_sync(&dbs_info->work);
-}
-
-static int cpufreq_governor_dbs(struct cpufreq_policy *policy,
+static int cs_cpufreq_governor_dbs(struct cpufreq_policy *policy,
unsigned int event)
{
- unsigned int cpu = policy->cpu;
- struct cpu_dbs_info_s *this_dbs_info;
- unsigned int j;
- int rc;
-
- this_dbs_info = &per_cpu(cs_cpu_dbs_info, cpu);
-
- switch (event) {
- case CPUFREQ_GOV_START:
- if ((!cpu_online(cpu)) || (!policy->cur))
- return -EINVAL;
-
- mutex_lock(&dbs_mutex);
-
- for_each_cpu(j, policy->cpus) {
- struct cpu_dbs_info_s *j_dbs_info;
- j_dbs_info = &per_cpu(cs_cpu_dbs_info, j);
- j_dbs_info->cur_policy = policy;
-
- j_dbs_info->prev_cpu_idle = get_cpu_idle_time(j,
- &j_dbs_info->prev_cpu_wall);
- if (dbs_tuners_ins.ignore_nice)
- j_dbs_info->prev_cpu_nice =
- kcpustat_cpu(j).cpustat[CPUTIME_NICE];
- }
- this_dbs_info->cpu = cpu;
- this_dbs_info->down_skip = 0;
- this_dbs_info->requested_freq = policy->cur;
-
- mutex_init(&this_dbs_info->timer_mutex);
- dbs_enable++;
- /*
- * Start the timerschedule work, when this governor
- * is used for first time
- */
- if (dbs_enable == 1) {
- unsigned int latency;
- /* policy latency is in nS. Convert it to uS first */
- latency = policy->cpuinfo.transition_latency / 1000;
- if (latency == 0)
- latency = 1;
-
- rc = sysfs_create_group(cpufreq_global_kobject,
- &dbs_attr_group);
- if (rc) {
- mutex_unlock(&dbs_mutex);
- return rc;
- }
-
- /*
- * conservative does not implement micro like ondemand
- * governor, thus we are bound to jiffes/HZ
- */
- min_sampling_rate =
- MIN_SAMPLING_RATE_RATIO * jiffies_to_usecs(10);
- /* Bring kernel and HW constraints together */
- min_sampling_rate = max(min_sampling_rate,
- MIN_LATENCY_MULTIPLIER * latency);
- dbs_tuners_ins.sampling_rate =
- max(min_sampling_rate,
- latency * LATENCY_MULTIPLIER);
-
- cpufreq_register_notifier(
- &dbs_cpufreq_notifier_block,
- CPUFREQ_TRANSITION_NOTIFIER);
- }
- mutex_unlock(&dbs_mutex);
-
- dbs_timer_init(this_dbs_info);
-
- break;
-
- case CPUFREQ_GOV_STOP:
- dbs_timer_exit(this_dbs_info);
-
- mutex_lock(&dbs_mutex);
- dbs_enable--;
- mutex_destroy(&this_dbs_info->timer_mutex);
-
- /*
- * Stop the timerschedule work, when this governor
- * is used for first time
- */
- if (dbs_enable == 0)
- cpufreq_unregister_notifier(
- &dbs_cpufreq_notifier_block,
- CPUFREQ_TRANSITION_NOTIFIER);
-
- mutex_unlock(&dbs_mutex);
- if (!dbs_enable)
- sysfs_remove_group(cpufreq_global_kobject,
- &dbs_attr_group);
-
- break;
-
- case CPUFREQ_GOV_LIMITS:
- mutex_lock(&this_dbs_info->timer_mutex);
- if (policy->max < this_dbs_info->cur_policy->cur)
- __cpufreq_driver_target(
- this_dbs_info->cur_policy,
- policy->max, CPUFREQ_RELATION_H);
- else if (policy->min > this_dbs_info->cur_policy->cur)
- __cpufreq_driver_target(
- this_dbs_info->cur_policy,
- policy->min, CPUFREQ_RELATION_L);
- dbs_check_cpu(this_dbs_info);
- mutex_unlock(&this_dbs_info->timer_mutex);
-
- break;
- }
- return 0;
+ return cpufreq_governor_dbs(&cs_dbs_data, policy, event);
}
#ifndef CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE
@@ -597,13 +333,14 @@
#endif
struct cpufreq_governor cpufreq_gov_conservative = {
.name = "conservative",
- .governor = cpufreq_governor_dbs,
+ .governor = cs_cpufreq_governor_dbs,
.max_transition_latency = TRANSITION_LATENCY_LIMIT,
.owner = THIS_MODULE,
};
static int __init cpufreq_gov_dbs_init(void)
{
+ mutex_init(&cs_dbs_data.mutex);
return cpufreq_register_governor(&cpufreq_gov_conservative);
}
@@ -612,7 +349,6 @@
cpufreq_unregister_governor(&cpufreq_gov_conservative);
}
-
MODULE_AUTHOR("Alexander Clouter <alex@digriz.org.uk>");
MODULE_DESCRIPTION("'cpufreq_conservative' - A dynamic cpufreq governor for "
"Low Latency Frequency Transition capable processors "
diff --git a/drivers/cpufreq/cpufreq_governor.c b/drivers/cpufreq/cpufreq_governor.c
new file mode 100644
index 0000000..6c5f1d3
--- /dev/null
+++ b/drivers/cpufreq/cpufreq_governor.c
@@ -0,0 +1,318 @@
+/*
+ * drivers/cpufreq/cpufreq_governor.c
+ *
+ * CPUFREQ governors common code
+ *
+ * Copyright (C) 2001 Russell King
+ * (C) 2003 Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>.
+ * (C) 2003 Jun Nakajima <jun.nakajima@intel.com>
+ * (C) 2009 Alexander Clouter <alex@digriz.org.uk>
+ * (c) 2012 Viresh Kumar <viresh.kumar@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <asm/cputime.h>
+#include <linux/cpufreq.h>
+#include <linux/cpumask.h>
+#include <linux/export.h>
+#include <linux/kernel_stat.h>
+#include <linux/mutex.h>
+#include <linux/tick.h>
+#include <linux/types.h>
+#include <linux/workqueue.h>
+
+#include "cpufreq_governor.h"
+
+static inline u64 get_cpu_idle_time_jiffy(unsigned int cpu, u64 *wall)
+{
+ u64 idle_time;
+ u64 cur_wall_time;
+ u64 busy_time;
+
+ cur_wall_time = jiffies64_to_cputime64(get_jiffies_64());
+
+ busy_time = kcpustat_cpu(cpu).cpustat[CPUTIME_USER];
+ busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_SYSTEM];
+ busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_IRQ];
+ busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_SOFTIRQ];
+ busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_STEAL];
+ busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_NICE];
+
+ idle_time = cur_wall_time - busy_time;
+ if (wall)
+ *wall = cputime_to_usecs(cur_wall_time);
+
+ return cputime_to_usecs(idle_time);
+}
+
+u64 get_cpu_idle_time(unsigned int cpu, u64 *wall)
+{
+ u64 idle_time = get_cpu_idle_time_us(cpu, NULL);
+
+ if (idle_time == -1ULL)
+ return get_cpu_idle_time_jiffy(cpu, wall);
+ else
+ idle_time += get_cpu_iowait_time_us(cpu, wall);
+
+ return idle_time;
+}
+EXPORT_SYMBOL_GPL(get_cpu_idle_time);
+
+void dbs_check_cpu(struct dbs_data *dbs_data, int cpu)
+{
+ struct cpu_dbs_common_info *cdbs = dbs_data->get_cpu_cdbs(cpu);
+ struct od_dbs_tuners *od_tuners = dbs_data->tuners;
+ struct cs_dbs_tuners *cs_tuners = dbs_data->tuners;
+ struct cpufreq_policy *policy;
+ unsigned int max_load = 0;
+ unsigned int ignore_nice;
+ unsigned int j;
+
+ if (dbs_data->governor == GOV_ONDEMAND)
+ ignore_nice = od_tuners->ignore_nice;
+ else
+ ignore_nice = cs_tuners->ignore_nice;
+
+ policy = cdbs->cur_policy;
+
+ /* Get Absolute Load (in terms of freq for ondemand gov) */
+ for_each_cpu(j, policy->cpus) {
+ struct cpu_dbs_common_info *j_cdbs;
+ u64 cur_wall_time, cur_idle_time, cur_iowait_time;
+ unsigned int idle_time, wall_time, iowait_time;
+ unsigned int load;
+
+ j_cdbs = dbs_data->get_cpu_cdbs(j);
+
+ cur_idle_time = get_cpu_idle_time(j, &cur_wall_time);
+
+ wall_time = (unsigned int)
+ (cur_wall_time - j_cdbs->prev_cpu_wall);
+ j_cdbs->prev_cpu_wall = cur_wall_time;
+
+ idle_time = (unsigned int)
+ (cur_idle_time - j_cdbs->prev_cpu_idle);
+ j_cdbs->prev_cpu_idle = cur_idle_time;
+
+ if (ignore_nice) {
+ u64 cur_nice;
+ unsigned long cur_nice_jiffies;
+
+ cur_nice = kcpustat_cpu(j).cpustat[CPUTIME_NICE] -
+ cdbs->prev_cpu_nice;
+ /*
+ * Assumption: nice time between sampling periods will
+ * be less than 2^32 jiffies for 32 bit sys
+ */
+ cur_nice_jiffies = (unsigned long)
+ cputime64_to_jiffies64(cur_nice);
+
+ cdbs->prev_cpu_nice =
+ kcpustat_cpu(j).cpustat[CPUTIME_NICE];
+ idle_time += jiffies_to_usecs(cur_nice_jiffies);
+ }
+
+ if (dbs_data->governor == GOV_ONDEMAND) {
+ struct od_cpu_dbs_info_s *od_j_dbs_info =
+ dbs_data->get_cpu_dbs_info_s(cpu);
+
+ cur_iowait_time = get_cpu_iowait_time_us(j,
+ &cur_wall_time);
+ if (cur_iowait_time == -1ULL)
+ cur_iowait_time = 0;
+
+ iowait_time = (unsigned int) (cur_iowait_time -
+ od_j_dbs_info->prev_cpu_iowait);
+ od_j_dbs_info->prev_cpu_iowait = cur_iowait_time;
+
+ /*
+ * For the purpose of ondemand, waiting for disk IO is
+ * an indication that you're performance critical, and
+ * not that the system is actually idle. So subtract the
+ * iowait time from the cpu idle time.
+ */
+ if (od_tuners->io_is_busy && idle_time >= iowait_time)
+ idle_time -= iowait_time;
+ }
+
+ if (unlikely(!wall_time || wall_time < idle_time))
+ continue;
+
+ load = 100 * (wall_time - idle_time) / wall_time;
+
+ if (dbs_data->governor == GOV_ONDEMAND) {
+ int freq_avg = __cpufreq_driver_getavg(policy, j);
+ if (freq_avg <= 0)
+ freq_avg = policy->cur;
+
+ load *= freq_avg;
+ }
+
+ if (load > max_load)
+ max_load = load;
+ }
+
+ dbs_data->gov_check_cpu(cpu, max_load);
+}
+EXPORT_SYMBOL_GPL(dbs_check_cpu);
+
+static inline void dbs_timer_init(struct dbs_data *dbs_data,
+ struct cpu_dbs_common_info *cdbs, unsigned int sampling_rate)
+{
+ int delay = delay_for_sampling_rate(sampling_rate);
+
+ INIT_DEFERRABLE_WORK(&cdbs->work, dbs_data->gov_dbs_timer);
+ schedule_delayed_work_on(cdbs->cpu, &cdbs->work, delay);
+}
+
+static inline void dbs_timer_exit(struct cpu_dbs_common_info *cdbs)
+{
+ cancel_delayed_work_sync(&cdbs->work);
+}
+
+int cpufreq_governor_dbs(struct dbs_data *dbs_data,
+ struct cpufreq_policy *policy, unsigned int event)
+{
+ struct od_cpu_dbs_info_s *od_dbs_info = NULL;
+ struct cs_cpu_dbs_info_s *cs_dbs_info = NULL;
+ struct od_dbs_tuners *od_tuners = dbs_data->tuners;
+ struct cs_dbs_tuners *cs_tuners = dbs_data->tuners;
+ struct cpu_dbs_common_info *cpu_cdbs;
+ unsigned int *sampling_rate, latency, ignore_nice, j, cpu = policy->cpu;
+ int rc;
+
+ cpu_cdbs = dbs_data->get_cpu_cdbs(cpu);
+
+ if (dbs_data->governor == GOV_CONSERVATIVE) {
+ cs_dbs_info = dbs_data->get_cpu_dbs_info_s(cpu);
+ sampling_rate = &cs_tuners->sampling_rate;
+ ignore_nice = cs_tuners->ignore_nice;
+ } else {
+ od_dbs_info = dbs_data->get_cpu_dbs_info_s(cpu);
+ sampling_rate = &od_tuners->sampling_rate;
+ ignore_nice = od_tuners->ignore_nice;
+ }
+
+ switch (event) {
+ case CPUFREQ_GOV_START:
+ if ((!cpu_online(cpu)) || (!policy->cur))
+ return -EINVAL;
+
+ mutex_lock(&dbs_data->mutex);
+
+ dbs_data->enable++;
+ cpu_cdbs->cpu = cpu;
+ for_each_cpu(j, policy->cpus) {
+ struct cpu_dbs_common_info *j_cdbs;
+ j_cdbs = dbs_data->get_cpu_cdbs(j);
+
+ j_cdbs->cur_policy = policy;
+ j_cdbs->prev_cpu_idle = get_cpu_idle_time(j,
+ &j_cdbs->prev_cpu_wall);
+ if (ignore_nice)
+ j_cdbs->prev_cpu_nice =
+ kcpustat_cpu(j).cpustat[CPUTIME_NICE];
+ }
+
+ /*
+ * Start the timerschedule work, when this governor is used for
+ * first time
+ */
+ if (dbs_data->enable != 1)
+ goto second_time;
+
+ rc = sysfs_create_group(cpufreq_global_kobject,
+ dbs_data->attr_group);
+ if (rc) {
+ mutex_unlock(&dbs_data->mutex);
+ return rc;
+ }
+
+ /* policy latency is in nS. Convert it to uS first */
+ latency = policy->cpuinfo.transition_latency / 1000;
+ if (latency == 0)
+ latency = 1;
+
+ /*
+ * conservative does not implement micro like ondemand
+ * governor, thus we are bound to jiffes/HZ
+ */
+ if (dbs_data->governor == GOV_CONSERVATIVE) {
+ struct cs_ops *ops = dbs_data->gov_ops;
+
+ cpufreq_register_notifier(ops->notifier_block,
+ CPUFREQ_TRANSITION_NOTIFIER);
+
+ dbs_data->min_sampling_rate = MIN_SAMPLING_RATE_RATIO *
+ jiffies_to_usecs(10);
+ } else {
+ struct od_ops *ops = dbs_data->gov_ops;
+
+ od_tuners->io_is_busy = ops->io_busy();
+ }
+
+ /* Bring kernel and HW constraints together */
+ dbs_data->min_sampling_rate = max(dbs_data->min_sampling_rate,
+ MIN_LATENCY_MULTIPLIER * latency);
+ *sampling_rate = max(dbs_data->min_sampling_rate, latency *
+ LATENCY_MULTIPLIER);
+
+second_time:
+ if (dbs_data->governor == GOV_CONSERVATIVE) {
+ cs_dbs_info->down_skip = 0;
+ cs_dbs_info->enable = 1;
+ cs_dbs_info->requested_freq = policy->cur;
+ } else {
+ struct od_ops *ops = dbs_data->gov_ops;
+ od_dbs_info->rate_mult = 1;
+ od_dbs_info->sample_type = OD_NORMAL_SAMPLE;
+ ops->powersave_bias_init_cpu(cpu);
+ }
+ mutex_unlock(&dbs_data->mutex);
+
+ mutex_init(&cpu_cdbs->timer_mutex);
+ dbs_timer_init(dbs_data, cpu_cdbs, *sampling_rate);
+ break;
+
+ case CPUFREQ_GOV_STOP:
+ if (dbs_data->governor == GOV_CONSERVATIVE)
+ cs_dbs_info->enable = 0;
+
+ dbs_timer_exit(cpu_cdbs);
+
+ mutex_lock(&dbs_data->mutex);
+ mutex_destroy(&cpu_cdbs->timer_mutex);
+ dbs_data->enable--;
+ if (!dbs_data->enable) {
+ struct cs_ops *ops = dbs_data->gov_ops;
+
+ sysfs_remove_group(cpufreq_global_kobject,
+ dbs_data->attr_group);
+ if (dbs_data->governor == GOV_CONSERVATIVE)
+ cpufreq_unregister_notifier(ops->notifier_block,
+ CPUFREQ_TRANSITION_NOTIFIER);
+ }
+ mutex_unlock(&dbs_data->mutex);
+
+ break;
+
+ case CPUFREQ_GOV_LIMITS:
+ mutex_lock(&cpu_cdbs->timer_mutex);
+ if (policy->max < cpu_cdbs->cur_policy->cur)
+ __cpufreq_driver_target(cpu_cdbs->cur_policy,
+ policy->max, CPUFREQ_RELATION_H);
+ else if (policy->min > cpu_cdbs->cur_policy->cur)
+ __cpufreq_driver_target(cpu_cdbs->cur_policy,
+ policy->min, CPUFREQ_RELATION_L);
+ dbs_check_cpu(dbs_data, cpu);
+ mutex_unlock(&cpu_cdbs->timer_mutex);
+ break;
+ }
+ return 0;
+}
+EXPORT_SYMBOL_GPL(cpufreq_governor_dbs);
diff --git a/drivers/cpufreq/cpufreq_governor.h b/drivers/cpufreq/cpufreq_governor.h
new file mode 100644
index 0000000..f661654
--- /dev/null
+++ b/drivers/cpufreq/cpufreq_governor.h
@@ -0,0 +1,176 @@
+/*
+ * drivers/cpufreq/cpufreq_governor.h
+ *
+ * Header file for CPUFreq governors common code
+ *
+ * Copyright (C) 2001 Russell King
+ * (C) 2003 Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>.
+ * (C) 2003 Jun Nakajima <jun.nakajima@intel.com>
+ * (C) 2009 Alexander Clouter <alex@digriz.org.uk>
+ * (c) 2012 Viresh Kumar <viresh.kumar@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _CPUFREQ_GOVERNER_H
+#define _CPUFREQ_GOVERNER_H
+
+#include <linux/cpufreq.h>
+#include <linux/kobject.h>
+#include <linux/mutex.h>
+#include <linux/workqueue.h>
+#include <linux/sysfs.h>
+
+/*
+ * The polling frequency depends on the capability of the processor. Default
+ * polling frequency is 1000 times the transition latency of the processor. The
+ * governor will work on any processor with transition latency <= 10mS, using
+ * appropriate sampling rate.
+ *
+ * For CPUs with transition latency > 10mS (mostly drivers with CPUFREQ_ETERNAL)
+ * this governor will not work. All times here are in uS.
+ */
+#define MIN_SAMPLING_RATE_RATIO (2)
+#define LATENCY_MULTIPLIER (1000)
+#define MIN_LATENCY_MULTIPLIER (100)
+#define TRANSITION_LATENCY_LIMIT (10 * 1000 * 1000)
+
+/* Ondemand Sampling types */
+enum {OD_NORMAL_SAMPLE, OD_SUB_SAMPLE};
+
+/* Macro creating sysfs show routines */
+#define show_one(_gov, file_name, object) \
+static ssize_t show_##file_name \
+(struct kobject *kobj, struct attribute *attr, char *buf) \
+{ \
+ return sprintf(buf, "%u\n", _gov##_tuners.object); \
+}
+
+#define define_get_cpu_dbs_routines(_dbs_info) \
+static struct cpu_dbs_common_info *get_cpu_cdbs(int cpu) \
+{ \
+ return &per_cpu(_dbs_info, cpu).cdbs; \
+} \
+ \
+static void *get_cpu_dbs_info_s(int cpu) \
+{ \
+ return &per_cpu(_dbs_info, cpu); \
+}
+
+/*
+ * Abbreviations:
+ * dbs: used as a shortform for demand based switching It helps to keep variable
+ * names smaller, simpler
+ * cdbs: common dbs
+ * on_*: On-demand governor
+ * cs_*: Conservative governor
+ */
+
+/* Per cpu structures */
+struct cpu_dbs_common_info {
+ int cpu;
+ u64 prev_cpu_idle;
+ u64 prev_cpu_wall;
+ u64 prev_cpu_nice;
+ struct cpufreq_policy *cur_policy;
+ struct delayed_work work;
+ /*
+ * percpu mutex that serializes governor limit change with gov_dbs_timer
+ * invocation. We do not want gov_dbs_timer to run when user is changing
+ * the governor or limits.
+ */
+ struct mutex timer_mutex;
+};
+
+struct od_cpu_dbs_info_s {
+ struct cpu_dbs_common_info cdbs;
+ u64 prev_cpu_iowait;
+ struct cpufreq_frequency_table *freq_table;
+ unsigned int freq_lo;
+ unsigned int freq_lo_jiffies;
+ unsigned int freq_hi_jiffies;
+ unsigned int rate_mult;
+ unsigned int sample_type:1;
+};
+
+struct cs_cpu_dbs_info_s {
+ struct cpu_dbs_common_info cdbs;
+ unsigned int down_skip;
+ unsigned int requested_freq;
+ unsigned int enable:1;
+};
+
+/* Governers sysfs tunables */
+struct od_dbs_tuners {
+ unsigned int ignore_nice;
+ unsigned int sampling_rate;
+ unsigned int sampling_down_factor;
+ unsigned int up_threshold;
+ unsigned int down_differential;
+ unsigned int powersave_bias;
+ unsigned int io_is_busy;
+};
+
+struct cs_dbs_tuners {
+ unsigned int ignore_nice;
+ unsigned int sampling_rate;
+ unsigned int sampling_down_factor;
+ unsigned int up_threshold;
+ unsigned int down_threshold;
+ unsigned int freq_step;
+};
+
+/* Per Governer data */
+struct dbs_data {
+ /* Common across governors */
+ #define GOV_ONDEMAND 0
+ #define GOV_CONSERVATIVE 1
+ int governor;
+ unsigned int min_sampling_rate;
+ unsigned int enable; /* number of CPUs using this policy */
+ struct attribute_group *attr_group;
+ void *tuners;
+
+ /* dbs_mutex protects dbs_enable in governor start/stop */
+ struct mutex mutex;
+
+ struct cpu_dbs_common_info *(*get_cpu_cdbs)(int cpu);
+ void *(*get_cpu_dbs_info_s)(int cpu);
+ void (*gov_dbs_timer)(struct work_struct *work);
+ void (*gov_check_cpu)(int cpu, unsigned int load);
+
+ /* Governor specific ops, see below */
+ void *gov_ops;
+};
+
+/* Governor specific ops, will be passed to dbs_data->gov_ops */
+struct od_ops {
+ int (*io_busy)(void);
+ void (*powersave_bias_init_cpu)(int cpu);
+ unsigned int (*powersave_bias_target)(struct cpufreq_policy *policy,
+ unsigned int freq_next, unsigned int relation);
+ void (*freq_increase)(struct cpufreq_policy *p, unsigned int freq);
+};
+
+struct cs_ops {
+ struct notifier_block *notifier_block;
+};
+
+static inline int delay_for_sampling_rate(unsigned int sampling_rate)
+{
+ int delay = usecs_to_jiffies(sampling_rate);
+
+ /* We want all CPUs to do sampling nearly on same jiffy */
+ if (num_online_cpus() > 1)
+ delay -= jiffies % delay;
+
+ return delay;
+}
+
+u64 get_cpu_idle_time(unsigned int cpu, u64 *wall);
+void dbs_check_cpu(struct dbs_data *dbs_data, int cpu);
+int cpufreq_governor_dbs(struct dbs_data *dbs_data,
+ struct cpufreq_policy *policy, unsigned int event);
+#endif /* _CPUFREQ_GOVERNER_H */
diff --git a/drivers/cpufreq/cpufreq_ondemand.c b/drivers/cpufreq/cpufreq_ondemand.c
index 396322f..7731f7c 100644
--- a/drivers/cpufreq/cpufreq_ondemand.c
+++ b/drivers/cpufreq/cpufreq_ondemand.c
@@ -10,24 +10,23 @@
* published by the Free Software Foundation.
*/
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/cpufreq.h>
-#include <linux/cpu.h>
-#include <linux/jiffies.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
#include <linux/kernel_stat.h>
+#include <linux/kobject.h>
+#include <linux/module.h>
#include <linux/mutex.h>
-#include <linux/hrtimer.h>
+#include <linux/percpu-defs.h>
+#include <linux/sysfs.h>
#include <linux/tick.h>
-#include <linux/ktime.h>
-#include <linux/sched.h>
+#include <linux/types.h>
-/*
- * dbs is used in this file as a shortform for demandbased switching
- * It helps to keep variable names smaller, simpler
- */
+#include "cpufreq_governor.h"
+/* On-demand governor macors */
#define DEF_FREQUENCY_DOWN_DIFFERENTIAL (10)
#define DEF_FREQUENCY_UP_THRESHOLD (80)
#define DEF_SAMPLING_DOWN_FACTOR (1)
@@ -38,80 +37,14 @@
#define MIN_FREQUENCY_UP_THRESHOLD (11)
#define MAX_FREQUENCY_UP_THRESHOLD (100)
-/*
- * The polling frequency of this governor depends on the capability of
- * the processor. Default polling frequency is 1000 times the transition
- * latency of the processor. The governor will work on any processor with
- * transition latency <= 10mS, using appropriate sampling
- * rate.
- * For CPUs with transition latency > 10mS (mostly drivers with CPUFREQ_ETERNAL)
- * this governor will not work.
- * All times here are in uS.
- */
-#define MIN_SAMPLING_RATE_RATIO (2)
-
-static unsigned int min_sampling_rate;
-
-#define LATENCY_MULTIPLIER (1000)
-#define MIN_LATENCY_MULTIPLIER (100)
-#define TRANSITION_LATENCY_LIMIT (10 * 1000 * 1000)
-
-static void do_dbs_timer(struct work_struct *work);
-static int cpufreq_governor_dbs(struct cpufreq_policy *policy,
- unsigned int event);
+static struct dbs_data od_dbs_data;
+static DEFINE_PER_CPU(struct od_cpu_dbs_info_s, od_cpu_dbs_info);
#ifndef CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND
-static
+static struct cpufreq_governor cpufreq_gov_ondemand;
#endif
-struct cpufreq_governor cpufreq_gov_ondemand = {
- .name = "ondemand",
- .governor = cpufreq_governor_dbs,
- .max_transition_latency = TRANSITION_LATENCY_LIMIT,
- .owner = THIS_MODULE,
-};
-/* Sampling types */
-enum {DBS_NORMAL_SAMPLE, DBS_SUB_SAMPLE};
-
-struct cpu_dbs_info_s {
- cputime64_t prev_cpu_idle;
- cputime64_t prev_cpu_iowait;
- cputime64_t prev_cpu_wall;
- cputime64_t prev_cpu_nice;
- struct cpufreq_policy *cur_policy;
- struct delayed_work work;
- struct cpufreq_frequency_table *freq_table;
- unsigned int freq_lo;
- unsigned int freq_lo_jiffies;
- unsigned int freq_hi_jiffies;
- unsigned int rate_mult;
- int cpu;
- unsigned int sample_type:1;
- /*
- * percpu mutex that serializes governor limit change with
- * do_dbs_timer invocation. We do not want do_dbs_timer to run
- * when user is changing the governor or limits.
- */
- struct mutex timer_mutex;
-};
-static DEFINE_PER_CPU(struct cpu_dbs_info_s, od_cpu_dbs_info);
-
-static unsigned int dbs_enable; /* number of CPUs using this policy */
-
-/*
- * dbs_mutex protects dbs_enable in governor start/stop.
- */
-static DEFINE_MUTEX(dbs_mutex);
-
-static struct dbs_tuners {
- unsigned int sampling_rate;
- unsigned int up_threshold;
- unsigned int down_differential;
- unsigned int ignore_nice;
- unsigned int sampling_down_factor;
- unsigned int powersave_bias;
- unsigned int io_is_busy;
-} dbs_tuners_ins = {
+static struct od_dbs_tuners od_tuners = {
.up_threshold = DEF_FREQUENCY_UP_THRESHOLD,
.sampling_down_factor = DEF_SAMPLING_DOWN_FACTOR,
.down_differential = DEF_FREQUENCY_DOWN_DIFFERENTIAL,
@@ -119,48 +52,35 @@
.powersave_bias = 0,
};
-static inline u64 get_cpu_idle_time_jiffy(unsigned int cpu, u64 *wall)
+static void ondemand_powersave_bias_init_cpu(int cpu)
{
- u64 idle_time;
- u64 cur_wall_time;
- u64 busy_time;
+ struct od_cpu_dbs_info_s *dbs_info = &per_cpu(od_cpu_dbs_info, cpu);
- cur_wall_time = jiffies64_to_cputime64(get_jiffies_64());
-
- busy_time = kcpustat_cpu(cpu).cpustat[CPUTIME_USER];
- busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_SYSTEM];
- busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_IRQ];
- busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_SOFTIRQ];
- busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_STEAL];
- busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_NICE];
-
- idle_time = cur_wall_time - busy_time;
- if (wall)
- *wall = jiffies_to_usecs(cur_wall_time);
-
- return jiffies_to_usecs(idle_time);
+ dbs_info->freq_table = cpufreq_frequency_get_table(cpu);
+ dbs_info->freq_lo = 0;
}
-static inline cputime64_t get_cpu_idle_time(unsigned int cpu, cputime64_t *wall)
+/*
+ * Not all CPUs want IO time to be accounted as busy; this depends on how
+ * efficient idling at a higher frequency/voltage is.
+ * Pavel Machek says this is not so for various generations of AMD and old
+ * Intel systems.
+ * Mike Chan (androidlcom) calis this is also not true for ARM.
+ * Because of this, whitelist specific known (series) of CPUs by default, and
+ * leave all others up to the user.
+ */
+static int should_io_be_busy(void)
{
- u64 idle_time = get_cpu_idle_time_us(cpu, NULL);
-
- if (idle_time == -1ULL)
- return get_cpu_idle_time_jiffy(cpu, wall);
- else
- idle_time += get_cpu_iowait_time_us(cpu, wall);
-
- return idle_time;
-}
-
-static inline cputime64_t get_cpu_iowait_time(unsigned int cpu, cputime64_t *wall)
-{
- u64 iowait_time = get_cpu_iowait_time_us(cpu, wall);
-
- if (iowait_time == -1ULL)
- return 0;
-
- return iowait_time;
+#if defined(CONFIG_X86)
+ /*
+ * For Intel, Core 2 (model 15) andl later have an efficient idle.
+ */
+ if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL &&
+ boot_cpu_data.x86 == 6 &&
+ boot_cpu_data.x86_model >= 15)
+ return 1;
+#endif
+ return 0;
}
/*
@@ -169,14 +89,13 @@
* freq_lo, and freq_lo_jiffies in percpu area for averaging freqs.
*/
static unsigned int powersave_bias_target(struct cpufreq_policy *policy,
- unsigned int freq_next,
- unsigned int relation)
+ unsigned int freq_next, unsigned int relation)
{
unsigned int freq_req, freq_reduc, freq_avg;
unsigned int freq_hi, freq_lo;
unsigned int index = 0;
unsigned int jiffies_total, jiffies_hi, jiffies_lo;
- struct cpu_dbs_info_s *dbs_info = &per_cpu(od_cpu_dbs_info,
+ struct od_cpu_dbs_info_s *dbs_info = &per_cpu(od_cpu_dbs_info,
policy->cpu);
if (!dbs_info->freq_table) {
@@ -188,7 +107,7 @@
cpufreq_frequency_table_target(policy, dbs_info->freq_table, freq_next,
relation, &index);
freq_req = dbs_info->freq_table[index].frequency;
- freq_reduc = freq_req * dbs_tuners_ins.powersave_bias / 1000;
+ freq_reduc = freq_req * od_tuners.powersave_bias / 1000;
freq_avg = freq_req - freq_reduc;
/* Find freq bounds for freq_avg in freq_table */
@@ -207,7 +126,7 @@
dbs_info->freq_lo_jiffies = 0;
return freq_lo;
}
- jiffies_total = usecs_to_jiffies(dbs_tuners_ins.sampling_rate);
+ jiffies_total = usecs_to_jiffies(od_tuners.sampling_rate);
jiffies_hi = (freq_avg - freq_lo) * jiffies_total;
jiffies_hi += ((freq_hi - freq_lo) / 2);
jiffies_hi /= (freq_hi - freq_lo);
@@ -218,13 +137,6 @@
return freq_hi;
}
-static void ondemand_powersave_bias_init_cpu(int cpu)
-{
- struct cpu_dbs_info_s *dbs_info = &per_cpu(od_cpu_dbs_info, cpu);
- dbs_info->freq_table = cpufreq_frequency_get_table(cpu);
- dbs_info->freq_lo = 0;
-}
-
static void ondemand_powersave_bias_init(void)
{
int i;
@@ -233,83 +145,173 @@
}
}
+static void dbs_freq_increase(struct cpufreq_policy *p, unsigned int freq)
+{
+ if (od_tuners.powersave_bias)
+ freq = powersave_bias_target(p, freq, CPUFREQ_RELATION_H);
+ else if (p->cur == p->max)
+ return;
+
+ __cpufreq_driver_target(p, freq, od_tuners.powersave_bias ?
+ CPUFREQ_RELATION_L : CPUFREQ_RELATION_H);
+}
+
+/*
+ * Every sampling_rate, we check, if current idle time is less than 20%
+ * (default), then we try to increase frequency Every sampling_rate, we look for
+ * a the lowest frequency which can sustain the load while keeping idle time
+ * over 30%. If such a frequency exist, we try to decrease to this frequency.
+ *
+ * Any frequency increase takes it to the maximum frequency. Frequency reduction
+ * happens at minimum steps of 5% (default) of current frequency
+ */
+static void od_check_cpu(int cpu, unsigned int load_freq)
+{
+ struct od_cpu_dbs_info_s *dbs_info = &per_cpu(od_cpu_dbs_info, cpu);
+ struct cpufreq_policy *policy = dbs_info->cdbs.cur_policy;
+
+ dbs_info->freq_lo = 0;
+
+ /* Check for frequency increase */
+ if (load_freq > od_tuners.up_threshold * policy->cur) {
+ /* If switching to max speed, apply sampling_down_factor */
+ if (policy->cur < policy->max)
+ dbs_info->rate_mult =
+ od_tuners.sampling_down_factor;
+ dbs_freq_increase(policy, policy->max);
+ return;
+ }
+
+ /* Check for frequency decrease */
+ /* if we cannot reduce the frequency anymore, break out early */
+ if (policy->cur == policy->min)
+ return;
+
+ /*
+ * The optimal frequency is the frequency that is the lowest that can
+ * support the current CPU usage without triggering the up policy. To be
+ * safe, we focus 10 points under the threshold.
+ */
+ if (load_freq < (od_tuners.up_threshold - od_tuners.down_differential) *
+ policy->cur) {
+ unsigned int freq_next;
+ freq_next = load_freq / (od_tuners.up_threshold -
+ od_tuners.down_differential);
+
+ /* No longer fully busy, reset rate_mult */
+ dbs_info->rate_mult = 1;
+
+ if (freq_next < policy->min)
+ freq_next = policy->min;
+
+ if (!od_tuners.powersave_bias) {
+ __cpufreq_driver_target(policy, freq_next,
+ CPUFREQ_RELATION_L);
+ } else {
+ int freq = powersave_bias_target(policy, freq_next,
+ CPUFREQ_RELATION_L);
+ __cpufreq_driver_target(policy, freq,
+ CPUFREQ_RELATION_L);
+ }
+ }
+}
+
+static void od_dbs_timer(struct work_struct *work)
+{
+ struct od_cpu_dbs_info_s *dbs_info =
+ container_of(work, struct od_cpu_dbs_info_s, cdbs.work.work);
+ unsigned int cpu = dbs_info->cdbs.cpu;
+ int delay, sample_type = dbs_info->sample_type;
+
+ mutex_lock(&dbs_info->cdbs.timer_mutex);
+
+ /* Common NORMAL_SAMPLE setup */
+ dbs_info->sample_type = OD_NORMAL_SAMPLE;
+ if (sample_type == OD_SUB_SAMPLE) {
+ delay = dbs_info->freq_lo_jiffies;
+ __cpufreq_driver_target(dbs_info->cdbs.cur_policy,
+ dbs_info->freq_lo, CPUFREQ_RELATION_H);
+ } else {
+ dbs_check_cpu(&od_dbs_data, cpu);
+ if (dbs_info->freq_lo) {
+ /* Setup timer for SUB_SAMPLE */
+ dbs_info->sample_type = OD_SUB_SAMPLE;
+ delay = dbs_info->freq_hi_jiffies;
+ } else {
+ delay = delay_for_sampling_rate(od_tuners.sampling_rate
+ * dbs_info->rate_mult);
+ }
+ }
+
+ schedule_delayed_work_on(cpu, &dbs_info->cdbs.work, delay);
+ mutex_unlock(&dbs_info->cdbs.timer_mutex);
+}
+
/************************** sysfs interface ************************/
static ssize_t show_sampling_rate_min(struct kobject *kobj,
struct attribute *attr, char *buf)
{
- return sprintf(buf, "%u\n", min_sampling_rate);
+ return sprintf(buf, "%u\n", od_dbs_data.min_sampling_rate);
}
-define_one_global_ro(sampling_rate_min);
-
-/* cpufreq_ondemand Governor Tunables */
-#define show_one(file_name, object) \
-static ssize_t show_##file_name \
-(struct kobject *kobj, struct attribute *attr, char *buf) \
-{ \
- return sprintf(buf, "%u\n", dbs_tuners_ins.object); \
-}
-show_one(sampling_rate, sampling_rate);
-show_one(io_is_busy, io_is_busy);
-show_one(up_threshold, up_threshold);
-show_one(sampling_down_factor, sampling_down_factor);
-show_one(ignore_nice_load, ignore_nice);
-show_one(powersave_bias, powersave_bias);
-
/**
* update_sampling_rate - update sampling rate effective immediately if needed.
* @new_rate: new sampling rate
*
* If new rate is smaller than the old, simply updaing
- * dbs_tuners_int.sampling_rate might not be appropriate. For example,
- * if the original sampling_rate was 1 second and the requested new sampling
- * rate is 10 ms because the user needs immediate reaction from ondemand
- * governor, but not sure if higher frequency will be required or not,
- * then, the governor may change the sampling rate too late; up to 1 second
- * later. Thus, if we are reducing the sampling rate, we need to make the
- * new value effective immediately.
+ * dbs_tuners_int.sampling_rate might not be appropriate. For example, if the
+ * original sampling_rate was 1 second and the requested new sampling rate is 10
+ * ms because the user needs immediate reaction from ondemand governor, but not
+ * sure if higher frequency will be required or not, then, the governor may
+ * change the sampling rate too late; up to 1 second later. Thus, if we are
+ * reducing the sampling rate, we need to make the new value effective
+ * immediately.
*/
static void update_sampling_rate(unsigned int new_rate)
{
int cpu;
- dbs_tuners_ins.sampling_rate = new_rate
- = max(new_rate, min_sampling_rate);
+ od_tuners.sampling_rate = new_rate = max(new_rate,
+ od_dbs_data.min_sampling_rate);
for_each_online_cpu(cpu) {
struct cpufreq_policy *policy;
- struct cpu_dbs_info_s *dbs_info;
+ struct od_cpu_dbs_info_s *dbs_info;
unsigned long next_sampling, appointed_at;
policy = cpufreq_cpu_get(cpu);
if (!policy)
continue;
+ if (policy->governor != &cpufreq_gov_ondemand) {
+ cpufreq_cpu_put(policy);
+ continue;
+ }
dbs_info = &per_cpu(od_cpu_dbs_info, policy->cpu);
cpufreq_cpu_put(policy);
- mutex_lock(&dbs_info->timer_mutex);
+ mutex_lock(&dbs_info->cdbs.timer_mutex);
- if (!delayed_work_pending(&dbs_info->work)) {
- mutex_unlock(&dbs_info->timer_mutex);
+ if (!delayed_work_pending(&dbs_info->cdbs.work)) {
+ mutex_unlock(&dbs_info->cdbs.timer_mutex);
continue;
}
- next_sampling = jiffies + usecs_to_jiffies(new_rate);
- appointed_at = dbs_info->work.timer.expires;
-
+ next_sampling = jiffies + usecs_to_jiffies(new_rate);
+ appointed_at = dbs_info->cdbs.work.timer.expires;
if (time_before(next_sampling, appointed_at)) {
- mutex_unlock(&dbs_info->timer_mutex);
- cancel_delayed_work_sync(&dbs_info->work);
- mutex_lock(&dbs_info->timer_mutex);
+ mutex_unlock(&dbs_info->cdbs.timer_mutex);
+ cancel_delayed_work_sync(&dbs_info->cdbs.work);
+ mutex_lock(&dbs_info->cdbs.timer_mutex);
- schedule_delayed_work_on(dbs_info->cpu, &dbs_info->work,
- usecs_to_jiffies(new_rate));
+ schedule_delayed_work_on(dbs_info->cdbs.cpu,
+ &dbs_info->cdbs.work,
+ usecs_to_jiffies(new_rate));
}
- mutex_unlock(&dbs_info->timer_mutex);
+ mutex_unlock(&dbs_info->cdbs.timer_mutex);
}
}
@@ -334,7 +336,7 @@
ret = sscanf(buf, "%u", &input);
if (ret != 1)
return -EINVAL;
- dbs_tuners_ins.io_is_busy = !!input;
+ od_tuners.io_is_busy = !!input;
return count;
}
@@ -349,7 +351,7 @@
input < MIN_FREQUENCY_UP_THRESHOLD) {
return -EINVAL;
}
- dbs_tuners_ins.up_threshold = input;
+ od_tuners.up_threshold = input;
return count;
}
@@ -362,12 +364,12 @@
if (ret != 1 || input > MAX_SAMPLING_DOWN_FACTOR || input < 1)
return -EINVAL;
- dbs_tuners_ins.sampling_down_factor = input;
+ od_tuners.sampling_down_factor = input;
/* Reset down sampling multiplier in case it was active */
for_each_online_cpu(j) {
- struct cpu_dbs_info_s *dbs_info;
- dbs_info = &per_cpu(od_cpu_dbs_info, j);
+ struct od_cpu_dbs_info_s *dbs_info = &per_cpu(od_cpu_dbs_info,
+ j);
dbs_info->rate_mult = 1;
}
return count;
@@ -388,19 +390,20 @@
if (input > 1)
input = 1;
- if (input == dbs_tuners_ins.ignore_nice) { /* nothing to do */
+ if (input == od_tuners.ignore_nice) { /* nothing to do */
return count;
}
- dbs_tuners_ins.ignore_nice = input;
+ od_tuners.ignore_nice = input;
/* we need to re-evaluate prev_cpu_idle */
for_each_online_cpu(j) {
- struct cpu_dbs_info_s *dbs_info;
+ struct od_cpu_dbs_info_s *dbs_info;
dbs_info = &per_cpu(od_cpu_dbs_info, j);
- dbs_info->prev_cpu_idle = get_cpu_idle_time(j,
- &dbs_info->prev_cpu_wall);
- if (dbs_tuners_ins.ignore_nice)
- dbs_info->prev_cpu_nice = kcpustat_cpu(j).cpustat[CPUTIME_NICE];
+ dbs_info->cdbs.prev_cpu_idle = get_cpu_idle_time(j,
+ &dbs_info->cdbs.prev_cpu_wall);
+ if (od_tuners.ignore_nice)
+ dbs_info->cdbs.prev_cpu_nice =
+ kcpustat_cpu(j).cpustat[CPUTIME_NICE];
}
return count;
@@ -419,17 +422,25 @@
if (input > 1000)
input = 1000;
- dbs_tuners_ins.powersave_bias = input;
+ od_tuners.powersave_bias = input;
ondemand_powersave_bias_init();
return count;
}
+show_one(od, sampling_rate, sampling_rate);
+show_one(od, io_is_busy, io_is_busy);
+show_one(od, up_threshold, up_threshold);
+show_one(od, sampling_down_factor, sampling_down_factor);
+show_one(od, ignore_nice_load, ignore_nice);
+show_one(od, powersave_bias, powersave_bias);
+
define_one_global_rw(sampling_rate);
define_one_global_rw(io_is_busy);
define_one_global_rw(up_threshold);
define_one_global_rw(sampling_down_factor);
define_one_global_rw(ignore_nice_load);
define_one_global_rw(powersave_bias);
+define_one_global_ro(sampling_rate_min);
static struct attribute *dbs_attributes[] = {
&sampling_rate_min.attr,
@@ -442,354 +453,71 @@
NULL
};
-static struct attribute_group dbs_attr_group = {
+static struct attribute_group od_attr_group = {
.attrs = dbs_attributes,
.name = "ondemand",
};
/************************** sysfs end ************************/
-static void dbs_freq_increase(struct cpufreq_policy *p, unsigned int freq)
-{
- if (dbs_tuners_ins.powersave_bias)
- freq = powersave_bias_target(p, freq, CPUFREQ_RELATION_H);
- else if (p->cur == p->max)
- return;
+define_get_cpu_dbs_routines(od_cpu_dbs_info);
- __cpufreq_driver_target(p, freq, dbs_tuners_ins.powersave_bias ?
- CPUFREQ_RELATION_L : CPUFREQ_RELATION_H);
+static struct od_ops od_ops = {
+ .io_busy = should_io_be_busy,
+ .powersave_bias_init_cpu = ondemand_powersave_bias_init_cpu,
+ .powersave_bias_target = powersave_bias_target,
+ .freq_increase = dbs_freq_increase,
+};
+
+static struct dbs_data od_dbs_data = {
+ .governor = GOV_ONDEMAND,
+ .attr_group = &od_attr_group,
+ .tuners = &od_tuners,
+ .get_cpu_cdbs = get_cpu_cdbs,
+ .get_cpu_dbs_info_s = get_cpu_dbs_info_s,
+ .gov_dbs_timer = od_dbs_timer,
+ .gov_check_cpu = od_check_cpu,
+ .gov_ops = &od_ops,
+};
+
+static int od_cpufreq_governor_dbs(struct cpufreq_policy *policy,
+ unsigned int event)
+{
+ return cpufreq_governor_dbs(&od_dbs_data, policy, event);
}
-static void dbs_check_cpu(struct cpu_dbs_info_s *this_dbs_info)
-{
- unsigned int max_load_freq;
-
- struct cpufreq_policy *policy;
- unsigned int j;
-
- this_dbs_info->freq_lo = 0;
- policy = this_dbs_info->cur_policy;
-
- /*
- * Every sampling_rate, we check, if current idle time is less
- * than 20% (default), then we try to increase frequency
- * Every sampling_rate, we look for a the lowest
- * frequency which can sustain the load while keeping idle time over
- * 30%. If such a frequency exist, we try to decrease to this frequency.
- *
- * Any frequency increase takes it to the maximum frequency.
- * Frequency reduction happens at minimum steps of
- * 5% (default) of current frequency
- */
-
- /* Get Absolute Load - in terms of freq */
- max_load_freq = 0;
-
- for_each_cpu(j, policy->cpus) {
- struct cpu_dbs_info_s *j_dbs_info;
- cputime64_t cur_wall_time, cur_idle_time, cur_iowait_time;
- unsigned int idle_time, wall_time, iowait_time;
- unsigned int load, load_freq;
- int freq_avg;
-
- j_dbs_info = &per_cpu(od_cpu_dbs_info, j);
-
- cur_idle_time = get_cpu_idle_time(j, &cur_wall_time);
- cur_iowait_time = get_cpu_iowait_time(j, &cur_wall_time);
-
- wall_time = (unsigned int)
- (cur_wall_time - j_dbs_info->prev_cpu_wall);
- j_dbs_info->prev_cpu_wall = cur_wall_time;
-
- idle_time = (unsigned int)
- (cur_idle_time - j_dbs_info->prev_cpu_idle);
- j_dbs_info->prev_cpu_idle = cur_idle_time;
-
- iowait_time = (unsigned int)
- (cur_iowait_time - j_dbs_info->prev_cpu_iowait);
- j_dbs_info->prev_cpu_iowait = cur_iowait_time;
-
- if (dbs_tuners_ins.ignore_nice) {
- u64 cur_nice;
- unsigned long cur_nice_jiffies;
-
- cur_nice = kcpustat_cpu(j).cpustat[CPUTIME_NICE] -
- j_dbs_info->prev_cpu_nice;
- /*
- * Assumption: nice time between sampling periods will
- * be less than 2^32 jiffies for 32 bit sys
- */
- cur_nice_jiffies = (unsigned long)
- cputime64_to_jiffies64(cur_nice);
-
- j_dbs_info->prev_cpu_nice = kcpustat_cpu(j).cpustat[CPUTIME_NICE];
- idle_time += jiffies_to_usecs(cur_nice_jiffies);
- }
-
- /*
- * For the purpose of ondemand, waiting for disk IO is an
- * indication that you're performance critical, and not that
- * the system is actually idle. So subtract the iowait time
- * from the cpu idle time.
- */
-
- if (dbs_tuners_ins.io_is_busy && idle_time >= iowait_time)
- idle_time -= iowait_time;
-
- if (unlikely(!wall_time || wall_time < idle_time))
- continue;
-
- load = 100 * (wall_time - idle_time) / wall_time;
-
- freq_avg = __cpufreq_driver_getavg(policy, j);
- if (freq_avg <= 0)
- freq_avg = policy->cur;
-
- load_freq = load * freq_avg;
- if (load_freq > max_load_freq)
- max_load_freq = load_freq;
- }
-
- /* Check for frequency increase */
- if (max_load_freq > dbs_tuners_ins.up_threshold * policy->cur) {
- /* If switching to max speed, apply sampling_down_factor */
- if (policy->cur < policy->max)
- this_dbs_info->rate_mult =
- dbs_tuners_ins.sampling_down_factor;
- dbs_freq_increase(policy, policy->max);
- return;
- }
-
- /* Check for frequency decrease */
- /* if we cannot reduce the frequency anymore, break out early */
- if (policy->cur == policy->min)
- return;
-
- /*
- * The optimal frequency is the frequency that is the lowest that
- * can support the current CPU usage without triggering the up
- * policy. To be safe, we focus 10 points under the threshold.
- */
- if (max_load_freq <
- (dbs_tuners_ins.up_threshold - dbs_tuners_ins.down_differential) *
- policy->cur) {
- unsigned int freq_next;
- freq_next = max_load_freq /
- (dbs_tuners_ins.up_threshold -
- dbs_tuners_ins.down_differential);
-
- /* No longer fully busy, reset rate_mult */
- this_dbs_info->rate_mult = 1;
-
- if (freq_next < policy->min)
- freq_next = policy->min;
-
- if (!dbs_tuners_ins.powersave_bias) {
- __cpufreq_driver_target(policy, freq_next,
- CPUFREQ_RELATION_L);
- } else {
- int freq = powersave_bias_target(policy, freq_next,
- CPUFREQ_RELATION_L);
- __cpufreq_driver_target(policy, freq,
- CPUFREQ_RELATION_L);
- }
- }
-}
-
-static void do_dbs_timer(struct work_struct *work)
-{
- struct cpu_dbs_info_s *dbs_info =
- container_of(work, struct cpu_dbs_info_s, work.work);
- unsigned int cpu = dbs_info->cpu;
- int sample_type = dbs_info->sample_type;
-
- int delay;
-
- mutex_lock(&dbs_info->timer_mutex);
-
- /* Common NORMAL_SAMPLE setup */
- dbs_info->sample_type = DBS_NORMAL_SAMPLE;
- if (!dbs_tuners_ins.powersave_bias ||
- sample_type == DBS_NORMAL_SAMPLE) {
- dbs_check_cpu(dbs_info);
- if (dbs_info->freq_lo) {
- /* Setup timer for SUB_SAMPLE */
- dbs_info->sample_type = DBS_SUB_SAMPLE;
- delay = dbs_info->freq_hi_jiffies;
- } else {
- /* We want all CPUs to do sampling nearly on
- * same jiffy
- */
- delay = usecs_to_jiffies(dbs_tuners_ins.sampling_rate
- * dbs_info->rate_mult);
-
- if (num_online_cpus() > 1)
- delay -= jiffies % delay;
- }
- } else {
- __cpufreq_driver_target(dbs_info->cur_policy,
- dbs_info->freq_lo, CPUFREQ_RELATION_H);
- delay = dbs_info->freq_lo_jiffies;
- }
- schedule_delayed_work_on(cpu, &dbs_info->work, delay);
- mutex_unlock(&dbs_info->timer_mutex);
-}
-
-static inline void dbs_timer_init(struct cpu_dbs_info_s *dbs_info)
-{
- /* We want all CPUs to do sampling nearly on same jiffy */
- int delay = usecs_to_jiffies(dbs_tuners_ins.sampling_rate);
-
- if (num_online_cpus() > 1)
- delay -= jiffies % delay;
-
- dbs_info->sample_type = DBS_NORMAL_SAMPLE;
- INIT_DEFERRABLE_WORK(&dbs_info->work, do_dbs_timer);
- schedule_delayed_work_on(dbs_info->cpu, &dbs_info->work, delay);
-}
-
-static inline void dbs_timer_exit(struct cpu_dbs_info_s *dbs_info)
-{
- cancel_delayed_work_sync(&dbs_info->work);
-}
-
-/*
- * Not all CPUs want IO time to be accounted as busy; this dependson how
- * efficient idling at a higher frequency/voltage is.
- * Pavel Machek says this is not so for various generations of AMD and old
- * Intel systems.
- * Mike Chan (androidlcom) calis this is also not true for ARM.
- * Because of this, whitelist specific known (series) of CPUs by default, and
- * leave all others up to the user.
- */
-static int should_io_be_busy(void)
-{
-#if defined(CONFIG_X86)
- /*
- * For Intel, Core 2 (model 15) andl later have an efficient idle.
- */
- if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL &&
- boot_cpu_data.x86 == 6 &&
- boot_cpu_data.x86_model >= 15)
- return 1;
+#ifndef CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND
+static
#endif
- return 0;
-}
-
-static int cpufreq_governor_dbs(struct cpufreq_policy *policy,
- unsigned int event)
-{
- unsigned int cpu = policy->cpu;
- struct cpu_dbs_info_s *this_dbs_info;
- unsigned int j;
- int rc;
-
- this_dbs_info = &per_cpu(od_cpu_dbs_info, cpu);
-
- switch (event) {
- case CPUFREQ_GOV_START:
- if ((!cpu_online(cpu)) || (!policy->cur))
- return -EINVAL;
-
- mutex_lock(&dbs_mutex);
-
- dbs_enable++;
- for_each_cpu(j, policy->cpus) {
- struct cpu_dbs_info_s *j_dbs_info;
- j_dbs_info = &per_cpu(od_cpu_dbs_info, j);
- j_dbs_info->cur_policy = policy;
-
- j_dbs_info->prev_cpu_idle = get_cpu_idle_time(j,
- &j_dbs_info->prev_cpu_wall);
- if (dbs_tuners_ins.ignore_nice)
- j_dbs_info->prev_cpu_nice =
- kcpustat_cpu(j).cpustat[CPUTIME_NICE];
- }
- this_dbs_info->cpu = cpu;
- this_dbs_info->rate_mult = 1;
- ondemand_powersave_bias_init_cpu(cpu);
- /*
- * Start the timerschedule work, when this governor
- * is used for first time
- */
- if (dbs_enable == 1) {
- unsigned int latency;
-
- rc = sysfs_create_group(cpufreq_global_kobject,
- &dbs_attr_group);
- if (rc) {
- mutex_unlock(&dbs_mutex);
- return rc;
- }
-
- /* policy latency is in nS. Convert it to uS first */
- latency = policy->cpuinfo.transition_latency / 1000;
- if (latency == 0)
- latency = 1;
- /* Bring kernel and HW constraints together */
- min_sampling_rate = max(min_sampling_rate,
- MIN_LATENCY_MULTIPLIER * latency);
- dbs_tuners_ins.sampling_rate =
- max(min_sampling_rate,
- latency * LATENCY_MULTIPLIER);
- dbs_tuners_ins.io_is_busy = should_io_be_busy();
- }
- mutex_unlock(&dbs_mutex);
-
- mutex_init(&this_dbs_info->timer_mutex);
- dbs_timer_init(this_dbs_info);
- break;
-
- case CPUFREQ_GOV_STOP:
- dbs_timer_exit(this_dbs_info);
-
- mutex_lock(&dbs_mutex);
- mutex_destroy(&this_dbs_info->timer_mutex);
- dbs_enable--;
- mutex_unlock(&dbs_mutex);
- if (!dbs_enable)
- sysfs_remove_group(cpufreq_global_kobject,
- &dbs_attr_group);
-
- break;
-
- case CPUFREQ_GOV_LIMITS:
- mutex_lock(&this_dbs_info->timer_mutex);
- if (policy->max < this_dbs_info->cur_policy->cur)
- __cpufreq_driver_target(this_dbs_info->cur_policy,
- policy->max, CPUFREQ_RELATION_H);
- else if (policy->min > this_dbs_info->cur_policy->cur)
- __cpufreq_driver_target(this_dbs_info->cur_policy,
- policy->min, CPUFREQ_RELATION_L);
- dbs_check_cpu(this_dbs_info);
- mutex_unlock(&this_dbs_info->timer_mutex);
- break;
- }
- return 0;
-}
+struct cpufreq_governor cpufreq_gov_ondemand = {
+ .name = "ondemand",
+ .governor = od_cpufreq_governor_dbs,
+ .max_transition_latency = TRANSITION_LATENCY_LIMIT,
+ .owner = THIS_MODULE,
+};
static int __init cpufreq_gov_dbs_init(void)
{
u64 idle_time;
int cpu = get_cpu();
+ mutex_init(&od_dbs_data.mutex);
idle_time = get_cpu_idle_time_us(cpu, NULL);
put_cpu();
if (idle_time != -1ULL) {
/* Idle micro accounting is supported. Use finer thresholds */
- dbs_tuners_ins.up_threshold = MICRO_FREQUENCY_UP_THRESHOLD;
- dbs_tuners_ins.down_differential =
- MICRO_FREQUENCY_DOWN_DIFFERENTIAL;
+ od_tuners.up_threshold = MICRO_FREQUENCY_UP_THRESHOLD;
+ od_tuners.down_differential = MICRO_FREQUENCY_DOWN_DIFFERENTIAL;
/*
* In nohz/micro accounting case we set the minimum frequency
* not depending on HZ, but fixed (very low). The deferred
* timer might skip some samples if idle/sleeping as needed.
*/
- min_sampling_rate = MICRO_FREQUENCY_MIN_SAMPLE_RATE;
+ od_dbs_data.min_sampling_rate = MICRO_FREQUENCY_MIN_SAMPLE_RATE;
} else {
/* For correct statistics, we need 10 ticks for each measure */
- min_sampling_rate =
- MIN_SAMPLING_RATE_RATIO * jiffies_to_usecs(10);
+ od_dbs_data.min_sampling_rate = MIN_SAMPLING_RATE_RATIO *
+ jiffies_to_usecs(10);
}
return cpufreq_register_governor(&cpufreq_gov_ondemand);
@@ -800,7 +528,6 @@
cpufreq_unregister_governor(&cpufreq_gov_ondemand);
}
-
MODULE_AUTHOR("Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>");
MODULE_AUTHOR("Alexey Starikovskiy <alexey.y.starikovskiy@intel.com>");
MODULE_DESCRIPTION("'cpufreq_ondemand' - A dynamic cpufreq governor for "
diff --git a/drivers/cpufreq/cpufreq_performance.c b/drivers/cpufreq/cpufreq_performance.c
index f13a8a9..ceee068 100644
--- a/drivers/cpufreq/cpufreq_performance.c
+++ b/drivers/cpufreq/cpufreq_performance.c
@@ -10,6 +10,8 @@
*
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/cpufreq.h>
diff --git a/drivers/cpufreq/cpufreq_powersave.c b/drivers/cpufreq/cpufreq_powersave.c
index 4c2eb51..2d948a1 100644
--- a/drivers/cpufreq/cpufreq_powersave.c
+++ b/drivers/cpufreq/cpufreq_powersave.c
@@ -10,6 +10,8 @@
*
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/cpufreq.h>
diff --git a/drivers/cpufreq/cpufreq_stats.c b/drivers/cpufreq/cpufreq_stats.c
index 3998316..e40e508 100644
--- a/drivers/cpufreq/cpufreq_stats.c
+++ b/drivers/cpufreq/cpufreq_stats.c
@@ -37,7 +37,7 @@
unsigned int max_state;
unsigned int state_num;
unsigned int last_index;
- cputime64_t *time_in_state;
+ u64 *time_in_state;
unsigned int *freq_table;
#ifdef CONFIG_CPU_FREQ_STAT_DETAILS
unsigned int *trans_table;
@@ -223,7 +223,7 @@
count++;
}
- alloc_size = count * sizeof(int) + count * sizeof(cputime64_t);
+ alloc_size = count * sizeof(int) + count * sizeof(u64);
#ifdef CONFIG_CPU_FREQ_STAT_DETAILS
alloc_size += count * count * sizeof(int);
diff --git a/drivers/cpufreq/cpufreq_userspace.c b/drivers/cpufreq/cpufreq_userspace.c
index bedac1a..c8c3d29 100644
--- a/drivers/cpufreq/cpufreq_userspace.c
+++ b/drivers/cpufreq/cpufreq_userspace.c
@@ -11,6 +11,8 @@
*
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/smp.h>
diff --git a/drivers/cpufreq/exynos-cpufreq.c b/drivers/cpufreq/exynos-cpufreq.c
index af2d81e..7012ea8 100644
--- a/drivers/cpufreq/exynos-cpufreq.c
+++ b/drivers/cpufreq/exynos-cpufreq.c
@@ -31,13 +31,13 @@
static bool frequency_locked;
static DEFINE_MUTEX(cpufreq_lock);
-int exynos_verify_speed(struct cpufreq_policy *policy)
+static int exynos_verify_speed(struct cpufreq_policy *policy)
{
return cpufreq_frequency_table_verify(policy,
exynos_info->freq_table);
}
-unsigned int exynos_getspeed(unsigned int cpu)
+static unsigned int exynos_getspeed(unsigned int cpu)
{
return clk_get_rate(exynos_info->cpu_clk) / 1000;
}
@@ -100,7 +100,8 @@
}
arm_volt = volt_table[index];
- cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+ for_each_cpu(freqs.cpu, policy->cpus)
+ cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
/* When the new frequency is higher than current frequency */
if ((freqs.new > freqs.old) && !safe_arm_volt) {
@@ -115,7 +116,8 @@
if (freqs.new != freqs.old)
exynos_info->set_freq(old_index, index);
- cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+ for_each_cpu(freqs.cpu, policy->cpus)
+ cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
/* When the new frequency is lower than current frequency */
if ((freqs.new < freqs.old) ||
@@ -235,6 +237,7 @@
cpumask_copy(policy->related_cpus, cpu_possible_mask);
cpumask_copy(policy->cpus, cpu_online_mask);
} else {
+ policy->shared_type = CPUFREQ_SHARED_TYPE_ANY;
cpumask_setall(policy->cpus);
}
diff --git a/drivers/cpufreq/freq_table.c b/drivers/cpufreq/freq_table.c
index 90431cb..49cda25 100644
--- a/drivers/cpufreq/freq_table.c
+++ b/drivers/cpufreq/freq_table.c
@@ -9,6 +9,8 @@
*
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
diff --git a/drivers/cpufreq/longhaul.c b/drivers/cpufreq/longhaul.c
index 53ddbc7..f1fa500 100644
--- a/drivers/cpufreq/longhaul.c
+++ b/drivers/cpufreq/longhaul.c
@@ -930,7 +930,7 @@
return 0;
}
-static int __devexit longhaul_cpu_exit(struct cpufreq_policy *policy)
+static int longhaul_cpu_exit(struct cpufreq_policy *policy)
{
cpufreq_frequency_table_put_attr(policy->cpu);
return 0;
@@ -946,7 +946,7 @@
.target = longhaul_target,
.get = longhaul_get,
.init = longhaul_cpu_init,
- .exit = __devexit_p(longhaul_cpu_exit),
+ .exit = longhaul_cpu_exit,
.name = "longhaul",
.owner = THIS_MODULE,
.attr = longhaul_attr,
diff --git a/drivers/cpufreq/powernow-k8.c b/drivers/cpufreq/powernow-k8.c
index e3ebb4f..056faf6 100644
--- a/drivers/cpufreq/powernow-k8.c
+++ b/drivers/cpufreq/powernow-k8.c
@@ -1186,7 +1186,7 @@
return -ENODEV;
}
-static int __devexit powernowk8_cpu_exit(struct cpufreq_policy *pol)
+static int powernowk8_cpu_exit(struct cpufreq_policy *pol)
{
struct powernow_k8_data *data = per_cpu(powernow_data, pol->cpu);
@@ -1242,7 +1242,7 @@
.target = powernowk8_target,
.bios_limit = acpi_processor_get_bios_limit,
.init = powernowk8_cpu_init,
- .exit = __devexit_p(powernowk8_cpu_exit),
+ .exit = powernowk8_cpu_exit,
.get = powernowk8_get,
.name = "powernow-k8",
.owner = THIS_MODULE,
diff --git a/drivers/cpufreq/spear-cpufreq.c b/drivers/cpufreq/spear-cpufreq.c
new file mode 100644
index 0000000..4575cfe
--- /dev/null
+++ b/drivers/cpufreq/spear-cpufreq.c
@@ -0,0 +1,291 @@
+/*
+ * drivers/cpufreq/spear-cpufreq.c
+ *
+ * CPU Frequency Scaling for SPEAr platform
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Deepak Sikri <deepak.sikri@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/clk.h>
+#include <linux/cpufreq.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+
+/* SPEAr CPUFreq driver data structure */
+static struct {
+ struct clk *clk;
+ unsigned int transition_latency;
+ struct cpufreq_frequency_table *freq_tbl;
+ u32 cnt;
+} spear_cpufreq;
+
+int spear_cpufreq_verify(struct cpufreq_policy *policy)
+{
+ return cpufreq_frequency_table_verify(policy, spear_cpufreq.freq_tbl);
+}
+
+static unsigned int spear_cpufreq_get(unsigned int cpu)
+{
+ return clk_get_rate(spear_cpufreq.clk) / 1000;
+}
+
+static struct clk *spear1340_cpu_get_possible_parent(unsigned long newfreq)
+{
+ struct clk *sys_pclk;
+ int pclk;
+ /*
+ * In SPEAr1340, cpu clk's parent sys clk can take input from
+ * following sources
+ */
+ const char *sys_clk_src[] = {
+ "sys_syn_clk",
+ "pll1_clk",
+ "pll2_clk",
+ "pll3_clk",
+ };
+
+ /*
+ * As sys clk can have multiple source with their own range
+ * limitation so we choose possible sources accordingly
+ */
+ if (newfreq <= 300000000)
+ pclk = 0; /* src is sys_syn_clk */
+ else if (newfreq > 300000000 && newfreq <= 500000000)
+ pclk = 3; /* src is pll3_clk */
+ else if (newfreq == 600000000)
+ pclk = 1; /* src is pll1_clk */
+ else
+ return ERR_PTR(-EINVAL);
+
+ /* Get parent to sys clock */
+ sys_pclk = clk_get(NULL, sys_clk_src[pclk]);
+ if (IS_ERR(sys_pclk))
+ pr_err("Failed to get %s clock\n", sys_clk_src[pclk]);
+
+ return sys_pclk;
+}
+
+/*
+ * In SPEAr1340, we cannot use newfreq directly because we need to actually
+ * access a source clock (clk) which might not be ancestor of cpu at present.
+ * Hence in SPEAr1340 we would operate on source clock directly before switching
+ * cpu clock to it.
+ */
+static int spear1340_set_cpu_rate(struct clk *sys_pclk, unsigned long newfreq)
+{
+ struct clk *sys_clk;
+ int ret = 0;
+
+ sys_clk = clk_get_parent(spear_cpufreq.clk);
+ if (IS_ERR(sys_clk)) {
+ pr_err("failed to get cpu's parent (sys) clock\n");
+ return PTR_ERR(sys_clk);
+ }
+
+ /* Set the rate of the source clock before changing the parent */
+ ret = clk_set_rate(sys_pclk, newfreq);
+ if (ret) {
+ pr_err("Failed to set sys clk rate to %lu\n", newfreq);
+ return ret;
+ }
+
+ ret = clk_set_parent(sys_clk, sys_pclk);
+ if (ret) {
+ pr_err("Failed to set sys clk parent\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static int spear_cpufreq_target(struct cpufreq_policy *policy,
+ unsigned int target_freq, unsigned int relation)
+{
+ struct cpufreq_freqs freqs;
+ unsigned long newfreq;
+ struct clk *srcclk;
+ int index, ret, mult = 1;
+
+ if (cpufreq_frequency_table_target(policy, spear_cpufreq.freq_tbl,
+ target_freq, relation, &index))
+ return -EINVAL;
+
+ freqs.cpu = policy->cpu;
+ freqs.old = spear_cpufreq_get(0);
+
+ newfreq = spear_cpufreq.freq_tbl[index].frequency * 1000;
+ if (of_machine_is_compatible("st,spear1340")) {
+ /*
+ * SPEAr1340 is special in the sense that due to the possibility
+ * of multiple clock sources for cpu clk's parent we can have
+ * different clock source for different frequency of cpu clk.
+ * Hence we need to choose one from amongst these possible clock
+ * sources.
+ */
+ srcclk = spear1340_cpu_get_possible_parent(newfreq);
+ if (IS_ERR(srcclk)) {
+ pr_err("Failed to get src clk\n");
+ return PTR_ERR(srcclk);
+ }
+
+ /* SPEAr1340: src clk is always 2 * intended cpu clk */
+ mult = 2;
+ } else {
+ /*
+ * src clock to be altered is ancestor of cpu clock. Hence we
+ * can directly work on cpu clk
+ */
+ srcclk = spear_cpufreq.clk;
+ }
+
+ newfreq = clk_round_rate(srcclk, newfreq * mult);
+ if (newfreq < 0) {
+ pr_err("clk_round_rate failed for cpu src clock\n");
+ return newfreq;
+ }
+
+ freqs.new = newfreq / 1000;
+ freqs.new /= mult;
+ cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+ if (mult == 2)
+ ret = spear1340_set_cpu_rate(srcclk, newfreq);
+ else
+ ret = clk_set_rate(spear_cpufreq.clk, newfreq);
+
+ /* Get current rate after clk_set_rate, in case of failure */
+ if (ret) {
+ pr_err("CPU Freq: cpu clk_set_rate failed: %d\n", ret);
+ freqs.new = clk_get_rate(spear_cpufreq.clk) / 1000;
+ }
+
+ cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+ return ret;
+}
+
+static int spear_cpufreq_init(struct cpufreq_policy *policy)
+{
+ int ret;
+
+ ret = cpufreq_frequency_table_cpuinfo(policy, spear_cpufreq.freq_tbl);
+ if (ret) {
+ pr_err("cpufreq_frequency_table_cpuinfo() failed");
+ return ret;
+ }
+
+ cpufreq_frequency_table_get_attr(spear_cpufreq.freq_tbl, policy->cpu);
+ policy->cpuinfo.transition_latency = spear_cpufreq.transition_latency;
+ policy->cur = spear_cpufreq_get(0);
+
+ cpumask_copy(policy->cpus, topology_core_cpumask(policy->cpu));
+ cpumask_copy(policy->related_cpus, policy->cpus);
+
+ return 0;
+}
+
+static int spear_cpufreq_exit(struct cpufreq_policy *policy)
+{
+ cpufreq_frequency_table_put_attr(policy->cpu);
+ return 0;
+}
+
+static struct freq_attr *spear_cpufreq_attr[] = {
+ &cpufreq_freq_attr_scaling_available_freqs,
+ NULL,
+};
+
+static struct cpufreq_driver spear_cpufreq_driver = {
+ .name = "cpufreq-spear",
+ .flags = CPUFREQ_STICKY,
+ .verify = spear_cpufreq_verify,
+ .target = spear_cpufreq_target,
+ .get = spear_cpufreq_get,
+ .init = spear_cpufreq_init,
+ .exit = spear_cpufreq_exit,
+ .attr = spear_cpufreq_attr,
+};
+
+static int spear_cpufreq_driver_init(void)
+{
+ struct device_node *np;
+ const struct property *prop;
+ struct cpufreq_frequency_table *freq_tbl;
+ const __be32 *val;
+ int cnt, i, ret;
+
+ np = of_find_node_by_path("/cpus/cpu@0");
+ if (!np) {
+ pr_err("No cpu node found");
+ return -ENODEV;
+ }
+
+ if (of_property_read_u32(np, "clock-latency",
+ &spear_cpufreq.transition_latency))
+ spear_cpufreq.transition_latency = CPUFREQ_ETERNAL;
+
+ prop = of_find_property(np, "cpufreq_tbl", NULL);
+ if (!prop || !prop->value) {
+ pr_err("Invalid cpufreq_tbl");
+ ret = -ENODEV;
+ goto out_put_node;
+ }
+
+ cnt = prop->length / sizeof(u32);
+ val = prop->value;
+
+ freq_tbl = kmalloc(sizeof(*freq_tbl) * (cnt + 1), GFP_KERNEL);
+ if (!freq_tbl) {
+ ret = -ENOMEM;
+ goto out_put_node;
+ }
+
+ for (i = 0; i < cnt; i++) {
+ freq_tbl[i].index = i;
+ freq_tbl[i].frequency = be32_to_cpup(val++);
+ }
+
+ freq_tbl[i].index = i;
+ freq_tbl[i].frequency = CPUFREQ_TABLE_END;
+
+ spear_cpufreq.freq_tbl = freq_tbl;
+
+ of_node_put(np);
+
+ spear_cpufreq.clk = clk_get(NULL, "cpu_clk");
+ if (IS_ERR(spear_cpufreq.clk)) {
+ pr_err("Unable to get CPU clock\n");
+ ret = PTR_ERR(spear_cpufreq.clk);
+ goto out_put_mem;
+ }
+
+ ret = cpufreq_register_driver(&spear_cpufreq_driver);
+ if (!ret)
+ return 0;
+
+ pr_err("failed register driver: %d\n", ret);
+ clk_put(spear_cpufreq.clk);
+
+out_put_mem:
+ kfree(freq_tbl);
+ return ret;
+
+out_put_node:
+ of_node_put(np);
+ return ret;
+}
+late_initcall(spear_cpufreq_driver_init);
+
+MODULE_AUTHOR("Deepak Sikri <deepak.sikri@st.com>");
+MODULE_DESCRIPTION("SPEAr CPUFreq driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/cpuidle/Kconfig b/drivers/cpuidle/Kconfig
index a76b689..234ae65 100644
--- a/drivers/cpuidle/Kconfig
+++ b/drivers/cpuidle/Kconfig
@@ -9,6 +9,15 @@
If you're using an ACPI-enabled platform, you should say Y here.
+config CPU_IDLE_MULTIPLE_DRIVERS
+ bool "Support multiple cpuidle drivers"
+ depends on CPU_IDLE
+ default n
+ help
+ Allows the cpuidle framework to use different drivers for each CPU.
+ This is useful if you have a system with different CPU latencies and
+ states. If unsure say N.
+
config CPU_IDLE_GOV_LADDER
bool
depends on CPU_IDLE
diff --git a/drivers/cpuidle/cpuidle.c b/drivers/cpuidle/cpuidle.c
index 7f15b85..8df53dd 100644
--- a/drivers/cpuidle/cpuidle.c
+++ b/drivers/cpuidle/cpuidle.c
@@ -68,7 +68,7 @@
int cpuidle_play_dead(void)
{
struct cpuidle_device *dev = __this_cpu_read(cpuidle_devices);
- struct cpuidle_driver *drv = cpuidle_get_driver();
+ struct cpuidle_driver *drv = cpuidle_get_cpu_driver(dev);
int i, dead_state = -1;
int power_usage = -1;
@@ -109,8 +109,7 @@
/* This can be moved to within driver enter routine
* but that results in multiple copies of same code.
*/
- dev->states_usage[entered_state].time +=
- (unsigned long long)dev->last_residency;
+ dev->states_usage[entered_state].time += dev->last_residency;
dev->states_usage[entered_state].usage++;
} else {
dev->last_residency = 0;
@@ -128,7 +127,7 @@
int cpuidle_idle_call(void)
{
struct cpuidle_device *dev = __this_cpu_read(cpuidle_devices);
- struct cpuidle_driver *drv = cpuidle_get_driver();
+ struct cpuidle_driver *drv;
int next_state, entered_state;
if (off)
@@ -141,9 +140,15 @@
if (!dev || !dev->enabled)
return -EBUSY;
+ drv = cpuidle_get_cpu_driver(dev);
+
/* ask the governor for the next state */
next_state = cpuidle_curr_governor->select(drv, dev);
if (need_resched()) {
+ dev->last_residency = 0;
+ /* give the governor an opportunity to reflect on the outcome */
+ if (cpuidle_curr_governor->reflect)
+ cpuidle_curr_governor->reflect(dev, next_state);
local_irq_enable();
return 0;
}
@@ -308,15 +313,19 @@
int cpuidle_enable_device(struct cpuidle_device *dev)
{
int ret, i;
- struct cpuidle_driver *drv = cpuidle_get_driver();
+ struct cpuidle_driver *drv;
if (!dev)
return -EINVAL;
if (dev->enabled)
return 0;
+
+ drv = cpuidle_get_cpu_driver(dev);
+
if (!drv || !cpuidle_curr_governor)
return -EIO;
+
if (!dev->state_count)
dev->state_count = drv->state_count;
@@ -331,7 +340,8 @@
poll_idle_init(drv);
- if ((ret = cpuidle_add_state_sysfs(dev)))
+ ret = cpuidle_add_device_sysfs(dev);
+ if (ret)
return ret;
if (cpuidle_curr_governor->enable &&
@@ -352,7 +362,7 @@
return 0;
fail_sysfs:
- cpuidle_remove_state_sysfs(dev);
+ cpuidle_remove_device_sysfs(dev);
return ret;
}
@@ -368,17 +378,20 @@
*/
void cpuidle_disable_device(struct cpuidle_device *dev)
{
+ struct cpuidle_driver *drv = cpuidle_get_cpu_driver(dev);
+
if (!dev || !dev->enabled)
return;
- if (!cpuidle_get_driver() || !cpuidle_curr_governor)
+
+ if (!drv || !cpuidle_curr_governor)
return;
dev->enabled = 0;
if (cpuidle_curr_governor->disable)
- cpuidle_curr_governor->disable(cpuidle_get_driver(), dev);
+ cpuidle_curr_governor->disable(drv, dev);
- cpuidle_remove_state_sysfs(dev);
+ cpuidle_remove_device_sysfs(dev);
enabled_devices--;
}
@@ -394,17 +407,14 @@
static int __cpuidle_register_device(struct cpuidle_device *dev)
{
int ret;
- struct device *cpu_dev = get_cpu_device((unsigned long)dev->cpu);
- struct cpuidle_driver *cpuidle_driver = cpuidle_get_driver();
+ struct cpuidle_driver *drv = cpuidle_get_cpu_driver(dev);
- if (!try_module_get(cpuidle_driver->owner))
+ if (!try_module_get(drv->owner))
return -EINVAL;
- init_completion(&dev->kobj_unregister);
-
per_cpu(cpuidle_devices, dev->cpu) = dev;
list_add(&dev->device_list, &cpuidle_detected_devices);
- ret = cpuidle_add_sysfs(cpu_dev);
+ ret = cpuidle_add_sysfs(dev);
if (ret)
goto err_sysfs;
@@ -416,12 +426,11 @@
return 0;
err_coupled:
- cpuidle_remove_sysfs(cpu_dev);
- wait_for_completion(&dev->kobj_unregister);
+ cpuidle_remove_sysfs(dev);
err_sysfs:
list_del(&dev->device_list);
per_cpu(cpuidle_devices, dev->cpu) = NULL;
- module_put(cpuidle_driver->owner);
+ module_put(drv->owner);
return ret;
}
@@ -460,8 +469,7 @@
*/
void cpuidle_unregister_device(struct cpuidle_device *dev)
{
- struct device *cpu_dev = get_cpu_device((unsigned long)dev->cpu);
- struct cpuidle_driver *cpuidle_driver = cpuidle_get_driver();
+ struct cpuidle_driver *drv = cpuidle_get_cpu_driver(dev);
if (dev->registered == 0)
return;
@@ -470,16 +478,15 @@
cpuidle_disable_device(dev);
- cpuidle_remove_sysfs(cpu_dev);
+ cpuidle_remove_sysfs(dev);
list_del(&dev->device_list);
- wait_for_completion(&dev->kobj_unregister);
per_cpu(cpuidle_devices, dev->cpu) = NULL;
cpuidle_coupled_unregister_device(dev);
cpuidle_resume_and_unlock();
- module_put(cpuidle_driver->owner);
+ module_put(drv->owner);
}
EXPORT_SYMBOL_GPL(cpuidle_unregister_device);
diff --git a/drivers/cpuidle/cpuidle.h b/drivers/cpuidle/cpuidle.h
index 76e7f69..ee97e96 100644
--- a/drivers/cpuidle/cpuidle.h
+++ b/drivers/cpuidle/cpuidle.h
@@ -5,8 +5,6 @@
#ifndef __DRIVER_CPUIDLE_H
#define __DRIVER_CPUIDLE_H
-#include <linux/device.h>
-
/* For internal use only */
extern struct cpuidle_governor *cpuidle_curr_governor;
extern struct list_head cpuidle_governors;
@@ -25,12 +23,15 @@
extern int cpuidle_switch_governor(struct cpuidle_governor *gov);
/* sysfs */
+
+struct device;
+
extern int cpuidle_add_interface(struct device *dev);
extern void cpuidle_remove_interface(struct device *dev);
-extern int cpuidle_add_state_sysfs(struct cpuidle_device *device);
-extern void cpuidle_remove_state_sysfs(struct cpuidle_device *device);
-extern int cpuidle_add_sysfs(struct device *dev);
-extern void cpuidle_remove_sysfs(struct device *dev);
+extern int cpuidle_add_device_sysfs(struct cpuidle_device *device);
+extern void cpuidle_remove_device_sysfs(struct cpuidle_device *device);
+extern int cpuidle_add_sysfs(struct cpuidle_device *dev);
+extern void cpuidle_remove_sysfs(struct cpuidle_device *dev);
#ifdef CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED
bool cpuidle_state_is_coupled(struct cpuidle_device *dev,
diff --git a/drivers/cpuidle/driver.c b/drivers/cpuidle/driver.c
index 87db387..3af841f 100644
--- a/drivers/cpuidle/driver.c
+++ b/drivers/cpuidle/driver.c
@@ -14,9 +14,10 @@
#include "cpuidle.h"
-static struct cpuidle_driver *cpuidle_curr_driver;
DEFINE_SPINLOCK(cpuidle_driver_lock);
-int cpuidle_driver_refcount;
+
+static void __cpuidle_set_cpu_driver(struct cpuidle_driver *drv, int cpu);
+static struct cpuidle_driver * __cpuidle_get_cpu_driver(int cpu);
static void set_power_states(struct cpuidle_driver *drv)
{
@@ -40,11 +41,15 @@
drv->states[i].power_usage = -1 - i;
}
-/**
- * cpuidle_register_driver - registers a driver
- * @drv: the driver
- */
-int cpuidle_register_driver(struct cpuidle_driver *drv)
+static void __cpuidle_driver_init(struct cpuidle_driver *drv)
+{
+ drv->refcnt = 0;
+
+ if (!drv->power_specified)
+ set_power_states(drv);
+}
+
+static int __cpuidle_register_driver(struct cpuidle_driver *drv, int cpu)
{
if (!drv || !drv->state_count)
return -EINVAL;
@@ -52,31 +57,101 @@
if (cpuidle_disabled())
return -ENODEV;
- spin_lock(&cpuidle_driver_lock);
- if (cpuidle_curr_driver) {
- spin_unlock(&cpuidle_driver_lock);
+ if (__cpuidle_get_cpu_driver(cpu))
return -EBUSY;
- }
- if (!drv->power_specified)
- set_power_states(drv);
+ __cpuidle_driver_init(drv);
- cpuidle_curr_driver = drv;
-
- spin_unlock(&cpuidle_driver_lock);
+ __cpuidle_set_cpu_driver(drv, cpu);
return 0;
}
-EXPORT_SYMBOL_GPL(cpuidle_register_driver);
+
+static void __cpuidle_unregister_driver(struct cpuidle_driver *drv, int cpu)
+{
+ if (drv != __cpuidle_get_cpu_driver(cpu))
+ return;
+
+ if (!WARN_ON(drv->refcnt > 0))
+ __cpuidle_set_cpu_driver(NULL, cpu);
+}
+
+#ifdef CONFIG_CPU_IDLE_MULTIPLE_DRIVERS
+
+static DEFINE_PER_CPU(struct cpuidle_driver *, cpuidle_drivers);
+
+static void __cpuidle_set_cpu_driver(struct cpuidle_driver *drv, int cpu)
+{
+ per_cpu(cpuidle_drivers, cpu) = drv;
+}
+
+static struct cpuidle_driver *__cpuidle_get_cpu_driver(int cpu)
+{
+ return per_cpu(cpuidle_drivers, cpu);
+}
+
+static void __cpuidle_unregister_all_cpu_driver(struct cpuidle_driver *drv)
+{
+ int cpu;
+ for_each_present_cpu(cpu)
+ __cpuidle_unregister_driver(drv, cpu);
+}
+
+static int __cpuidle_register_all_cpu_driver(struct cpuidle_driver *drv)
+{
+ int ret = 0;
+ int i, cpu;
+
+ for_each_present_cpu(cpu) {
+ ret = __cpuidle_register_driver(drv, cpu);
+ if (ret)
+ break;
+ }
+
+ if (ret)
+ for_each_present_cpu(i) {
+ if (i == cpu)
+ break;
+ __cpuidle_unregister_driver(drv, i);
+ }
+
+
+ return ret;
+}
+
+int cpuidle_register_cpu_driver(struct cpuidle_driver *drv, int cpu)
+{
+ int ret;
+
+ spin_lock(&cpuidle_driver_lock);
+ ret = __cpuidle_register_driver(drv, cpu);
+ spin_unlock(&cpuidle_driver_lock);
+
+ return ret;
+}
+
+void cpuidle_unregister_cpu_driver(struct cpuidle_driver *drv, int cpu)
+{
+ spin_lock(&cpuidle_driver_lock);
+ __cpuidle_unregister_driver(drv, cpu);
+ spin_unlock(&cpuidle_driver_lock);
+}
/**
- * cpuidle_get_driver - return the current driver
+ * cpuidle_register_driver - registers a driver
+ * @drv: the driver
*/
-struct cpuidle_driver *cpuidle_get_driver(void)
+int cpuidle_register_driver(struct cpuidle_driver *drv)
{
- return cpuidle_curr_driver;
+ int ret;
+
+ spin_lock(&cpuidle_driver_lock);
+ ret = __cpuidle_register_all_cpu_driver(drv);
+ spin_unlock(&cpuidle_driver_lock);
+
+ return ret;
}
-EXPORT_SYMBOL_GPL(cpuidle_get_driver);
+EXPORT_SYMBOL_GPL(cpuidle_register_driver);
/**
* cpuidle_unregister_driver - unregisters a driver
@@ -84,29 +159,103 @@
*/
void cpuidle_unregister_driver(struct cpuidle_driver *drv)
{
- if (drv != cpuidle_curr_driver) {
- WARN(1, "invalid cpuidle_unregister_driver(%s)\n",
- drv->name);
- return;
- }
-
spin_lock(&cpuidle_driver_lock);
-
- if (!WARN_ON(cpuidle_driver_refcount > 0))
- cpuidle_curr_driver = NULL;
-
+ __cpuidle_unregister_all_cpu_driver(drv);
spin_unlock(&cpuidle_driver_lock);
}
EXPORT_SYMBOL_GPL(cpuidle_unregister_driver);
+#else
+
+static struct cpuidle_driver *cpuidle_curr_driver;
+
+static inline void __cpuidle_set_cpu_driver(struct cpuidle_driver *drv, int cpu)
+{
+ cpuidle_curr_driver = drv;
+}
+
+static inline struct cpuidle_driver *__cpuidle_get_cpu_driver(int cpu)
+{
+ return cpuidle_curr_driver;
+}
+
+/**
+ * cpuidle_register_driver - registers a driver
+ * @drv: the driver
+ */
+int cpuidle_register_driver(struct cpuidle_driver *drv)
+{
+ int ret, cpu;
+
+ cpu = get_cpu();
+ spin_lock(&cpuidle_driver_lock);
+ ret = __cpuidle_register_driver(drv, cpu);
+ spin_unlock(&cpuidle_driver_lock);
+ put_cpu();
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(cpuidle_register_driver);
+
+/**
+ * cpuidle_unregister_driver - unregisters a driver
+ * @drv: the driver
+ */
+void cpuidle_unregister_driver(struct cpuidle_driver *drv)
+{
+ int cpu;
+
+ cpu = get_cpu();
+ spin_lock(&cpuidle_driver_lock);
+ __cpuidle_unregister_driver(drv, cpu);
+ spin_unlock(&cpuidle_driver_lock);
+ put_cpu();
+}
+EXPORT_SYMBOL_GPL(cpuidle_unregister_driver);
+#endif
+
+/**
+ * cpuidle_get_driver - return the current driver
+ */
+struct cpuidle_driver *cpuidle_get_driver(void)
+{
+ struct cpuidle_driver *drv;
+ int cpu;
+
+ cpu = get_cpu();
+ drv = __cpuidle_get_cpu_driver(cpu);
+ put_cpu();
+
+ return drv;
+}
+EXPORT_SYMBOL_GPL(cpuidle_get_driver);
+
+/**
+ * cpuidle_get_cpu_driver - return the driver tied with a cpu
+ */
+struct cpuidle_driver *cpuidle_get_cpu_driver(struct cpuidle_device *dev)
+{
+ struct cpuidle_driver *drv;
+
+ if (!dev)
+ return NULL;
+
+ spin_lock(&cpuidle_driver_lock);
+ drv = __cpuidle_get_cpu_driver(dev->cpu);
+ spin_unlock(&cpuidle_driver_lock);
+
+ return drv;
+}
+EXPORT_SYMBOL_GPL(cpuidle_get_cpu_driver);
+
struct cpuidle_driver *cpuidle_driver_ref(void)
{
struct cpuidle_driver *drv;
spin_lock(&cpuidle_driver_lock);
- drv = cpuidle_curr_driver;
- cpuidle_driver_refcount++;
+ drv = cpuidle_get_driver();
+ drv->refcnt++;
spin_unlock(&cpuidle_driver_lock);
return drv;
@@ -114,10 +263,12 @@
void cpuidle_driver_unref(void)
{
+ struct cpuidle_driver *drv = cpuidle_get_driver();
+
spin_lock(&cpuidle_driver_lock);
- if (!WARN_ON(cpuidle_driver_refcount <= 0))
- cpuidle_driver_refcount--;
+ if (drv && !WARN_ON(drv->refcnt <= 0))
+ drv->refcnt--;
spin_unlock(&cpuidle_driver_lock);
}
diff --git a/drivers/cpuidle/governors/menu.c b/drivers/cpuidle/governors/menu.c
index 5b1f2c3..bd40b94 100644
--- a/drivers/cpuidle/governors/menu.c
+++ b/drivers/cpuidle/governors/menu.c
@@ -28,6 +28,13 @@
#define MAX_INTERESTING 50000
#define STDDEV_THRESH 400
+/* 60 * 60 > STDDEV_THRESH * INTERVALS = 400 * 8 */
+#define MAX_DEVIATION 60
+
+static DEFINE_PER_CPU(struct hrtimer, menu_hrtimer);
+static DEFINE_PER_CPU(int, hrtimer_status);
+/* menu hrtimer mode */
+enum {MENU_HRTIMER_STOP, MENU_HRTIMER_REPEAT, MENU_HRTIMER_GENERAL};
/*
* Concepts and ideas behind the menu governor
@@ -109,6 +116,13 @@
*
*/
+/*
+ * The C-state residency is so long that is is worthwhile to exit
+ * from the shallow C-state and re-enter into a deeper C-state.
+ */
+static unsigned int perfect_cstate_ms __read_mostly = 30;
+module_param(perfect_cstate_ms, uint, 0000);
+
struct menu_device {
int last_state_idx;
int needs_update;
@@ -191,40 +205,102 @@
return div_u64(dividend + (divisor / 2), divisor);
}
+/* Cancel the hrtimer if it is not triggered yet */
+void menu_hrtimer_cancel(void)
+{
+ int cpu = smp_processor_id();
+ struct hrtimer *hrtmr = &per_cpu(menu_hrtimer, cpu);
+
+ /* The timer is still not time out*/
+ if (per_cpu(hrtimer_status, cpu)) {
+ hrtimer_cancel(hrtmr);
+ per_cpu(hrtimer_status, cpu) = MENU_HRTIMER_STOP;
+ }
+}
+EXPORT_SYMBOL_GPL(menu_hrtimer_cancel);
+
+/* Call back for hrtimer is triggered */
+static enum hrtimer_restart menu_hrtimer_notify(struct hrtimer *hrtimer)
+{
+ int cpu = smp_processor_id();
+ struct menu_device *data = &per_cpu(menu_devices, cpu);
+
+ /* In general case, the expected residency is much larger than
+ * deepest C-state target residency, but prediction logic still
+ * predicts a small predicted residency, so the prediction
+ * history is totally broken if the timer is triggered.
+ * So reset the correction factor.
+ */
+ if (per_cpu(hrtimer_status, cpu) == MENU_HRTIMER_GENERAL)
+ data->correction_factor[data->bucket] = RESOLUTION * DECAY;
+
+ per_cpu(hrtimer_status, cpu) = MENU_HRTIMER_STOP;
+
+ return HRTIMER_NORESTART;
+}
+
/*
* Try detecting repeating patterns by keeping track of the last 8
* intervals, and checking if the standard deviation of that set
* of points is below a threshold. If it is... then use the
* average of these 8 points as the estimated value.
*/
-static void detect_repeating_patterns(struct menu_device *data)
+static u32 get_typical_interval(struct menu_device *data)
{
- int i;
- uint64_t avg = 0;
- uint64_t stddev = 0; /* contains the square of the std deviation */
+ int i = 0, divisor = 0;
+ uint64_t max = 0, avg = 0, stddev = 0;
+ int64_t thresh = LLONG_MAX; /* Discard outliers above this value. */
+ unsigned int ret = 0;
+
+again:
/* first calculate average and standard deviation of the past */
- for (i = 0; i < INTERVALS; i++)
- avg += data->intervals[i];
- avg = avg / INTERVALS;
+ max = avg = divisor = stddev = 0;
+ for (i = 0; i < INTERVALS; i++) {
+ int64_t value = data->intervals[i];
+ if (value <= thresh) {
+ avg += value;
+ divisor++;
+ if (value > max)
+ max = value;
+ }
+ }
+ do_div(avg, divisor);
- /* if the avg is beyond the known next tick, it's worthless */
- if (avg > data->expected_us)
- return;
-
- for (i = 0; i < INTERVALS; i++)
- stddev += (data->intervals[i] - avg) *
- (data->intervals[i] - avg);
-
- stddev = stddev / INTERVALS;
-
+ for (i = 0; i < INTERVALS; i++) {
+ int64_t value = data->intervals[i];
+ if (value <= thresh) {
+ int64_t diff = value - avg;
+ stddev += diff * diff;
+ }
+ }
+ do_div(stddev, divisor);
+ stddev = int_sqrt(stddev);
/*
- * now.. if stddev is small.. then assume we have a
- * repeating pattern and predict we keep doing this.
+ * If we have outliers to the upside in our distribution, discard
+ * those by setting the threshold to exclude these outliers, then
+ * calculate the average and standard deviation again. Once we get
+ * down to the bottom 3/4 of our samples, stop excluding samples.
+ *
+ * This can deal with workloads that have long pauses interspersed
+ * with sporadic activity with a bunch of short pauses.
+ *
+ * The typical interval is obtained when standard deviation is small
+ * or standard deviation is small compared to the average interval.
*/
-
- if (avg && stddev < STDDEV_THRESH)
+ if (((avg > stddev * 6) && (divisor * 4 >= INTERVALS * 3))
+ || stddev <= 20) {
data->predicted_us = avg;
+ ret = 1;
+ return ret;
+
+ } else if ((divisor * 4) > INTERVALS * 3) {
+ /* Exclude the max interval */
+ thresh = max - 1;
+ goto again;
+ }
+
+ return ret;
}
/**
@@ -240,6 +316,9 @@
int i;
int multiplier;
struct timespec t;
+ int repeat = 0, low_predicted = 0;
+ int cpu = smp_processor_id();
+ struct hrtimer *hrtmr = &per_cpu(menu_hrtimer, cpu);
if (data->needs_update) {
menu_update(drv, dev);
@@ -274,7 +353,7 @@
data->predicted_us = div_round64(data->expected_us * data->correction_factor[data->bucket],
RESOLUTION * DECAY);
- detect_repeating_patterns(data);
+ repeat = get_typical_interval(data);
/*
* We want to default to C1 (hlt), not to busy polling
@@ -295,8 +374,10 @@
if (s->disabled || su->disable)
continue;
- if (s->target_residency > data->predicted_us)
+ if (s->target_residency > data->predicted_us) {
+ low_predicted = 1;
continue;
+ }
if (s->exit_latency > latency_req)
continue;
if (s->exit_latency * multiplier > data->predicted_us)
@@ -309,6 +390,44 @@
}
}
+ /* not deepest C-state chosen for low predicted residency */
+ if (low_predicted) {
+ unsigned int timer_us = 0;
+ unsigned int perfect_us = 0;
+
+ /*
+ * Set a timer to detect whether this sleep is much
+ * longer than repeat mode predicted. If the timer
+ * triggers, the code will evaluate whether to put
+ * the CPU into a deeper C-state.
+ * The timer is cancelled on CPU wakeup.
+ */
+ timer_us = 2 * (data->predicted_us + MAX_DEVIATION);
+
+ perfect_us = perfect_cstate_ms * 1000;
+
+ if (repeat && (4 * timer_us < data->expected_us)) {
+ RCU_NONIDLE(hrtimer_start(hrtmr,
+ ns_to_ktime(1000 * timer_us),
+ HRTIMER_MODE_REL_PINNED));
+ /* In repeat case, menu hrtimer is started */
+ per_cpu(hrtimer_status, cpu) = MENU_HRTIMER_REPEAT;
+ } else if (perfect_us < data->expected_us) {
+ /*
+ * The next timer is long. This could be because
+ * we did not make a useful prediction.
+ * In that case, it makes sense to re-enter
+ * into a deeper C-state after some time.
+ */
+ RCU_NONIDLE(hrtimer_start(hrtmr,
+ ns_to_ktime(1000 * timer_us),
+ HRTIMER_MODE_REL_PINNED));
+ /* In general case, menu hrtimer is started */
+ per_cpu(hrtimer_status, cpu) = MENU_HRTIMER_GENERAL;
+ }
+
+ }
+
return data->last_state_idx;
}
@@ -399,6 +518,9 @@
struct cpuidle_device *dev)
{
struct menu_device *data = &per_cpu(menu_devices, dev->cpu);
+ struct hrtimer *t = &per_cpu(menu_hrtimer, dev->cpu);
+ hrtimer_init(t, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
+ t->function = menu_hrtimer_notify;
memset(data, 0, sizeof(struct menu_device));
diff --git a/drivers/cpuidle/sysfs.c b/drivers/cpuidle/sysfs.c
index 5f809e3..3409429 100644
--- a/drivers/cpuidle/sysfs.c
+++ b/drivers/cpuidle/sysfs.c
@@ -12,6 +12,7 @@
#include <linux/slab.h>
#include <linux/cpu.h>
#include <linux/capability.h>
+#include <linux/device.h>
#include "cpuidle.h"
@@ -297,6 +298,13 @@
NULL
};
+struct cpuidle_state_kobj {
+ struct cpuidle_state *state;
+ struct cpuidle_state_usage *state_usage;
+ struct completion kobj_unregister;
+ struct kobject kobj;
+};
+
#define kobj_to_state_obj(k) container_of(k, struct cpuidle_state_kobj, kobj)
#define kobj_to_state(k) (kobj_to_state_obj(k)->state)
#define kobj_to_state_usage(k) (kobj_to_state_obj(k)->state_usage)
@@ -356,17 +364,17 @@
}
/**
- * cpuidle_add_driver_sysfs - adds driver-specific sysfs attributes
+ * cpuidle_add_state_sysfs - adds cpuidle states sysfs attributes
* @device: the target device
*/
-int cpuidle_add_state_sysfs(struct cpuidle_device *device)
+static int cpuidle_add_state_sysfs(struct cpuidle_device *device)
{
int i, ret = -ENOMEM;
struct cpuidle_state_kobj *kobj;
- struct cpuidle_driver *drv = cpuidle_get_driver();
+ struct cpuidle_driver *drv = cpuidle_get_cpu_driver(device);
/* state statistics */
- for (i = 0; i < device->state_count; i++) {
+ for (i = 0; i < drv->state_count; i++) {
kobj = kzalloc(sizeof(struct cpuidle_state_kobj), GFP_KERNEL);
if (!kobj)
goto error_state;
@@ -374,8 +382,8 @@
kobj->state_usage = &device->states_usage[i];
init_completion(&kobj->kobj_unregister);
- ret = kobject_init_and_add(&kobj->kobj, &ktype_state_cpuidle, &device->kobj,
- "state%d", i);
+ ret = kobject_init_and_add(&kobj->kobj, &ktype_state_cpuidle,
+ &device->kobj, "state%d", i);
if (ret) {
kfree(kobj);
goto error_state;
@@ -393,10 +401,10 @@
}
/**
- * cpuidle_remove_driver_sysfs - removes driver-specific sysfs attributes
+ * cpuidle_remove_driver_sysfs - removes the cpuidle states sysfs attributes
* @device: the target device
*/
-void cpuidle_remove_state_sysfs(struct cpuidle_device *device)
+static void cpuidle_remove_state_sysfs(struct cpuidle_device *device)
{
int i;
@@ -404,17 +412,179 @@
cpuidle_free_state_kobj(device, i);
}
+#ifdef CONFIG_CPU_IDLE_MULTIPLE_DRIVERS
+#define kobj_to_driver_kobj(k) container_of(k, struct cpuidle_driver_kobj, kobj)
+#define attr_to_driver_attr(a) container_of(a, struct cpuidle_driver_attr, attr)
+
+#define define_one_driver_ro(_name, show) \
+ static struct cpuidle_driver_attr attr_driver_##_name = \
+ __ATTR(_name, 0644, show, NULL)
+
+struct cpuidle_driver_kobj {
+ struct cpuidle_driver *drv;
+ struct completion kobj_unregister;
+ struct kobject kobj;
+};
+
+struct cpuidle_driver_attr {
+ struct attribute attr;
+ ssize_t (*show)(struct cpuidle_driver *, char *);
+ ssize_t (*store)(struct cpuidle_driver *, const char *, size_t);
+};
+
+static ssize_t show_driver_name(struct cpuidle_driver *drv, char *buf)
+{
+ ssize_t ret;
+
+ spin_lock(&cpuidle_driver_lock);
+ ret = sprintf(buf, "%s\n", drv ? drv->name : "none");
+ spin_unlock(&cpuidle_driver_lock);
+
+ return ret;
+}
+
+static void cpuidle_driver_sysfs_release(struct kobject *kobj)
+{
+ struct cpuidle_driver_kobj *driver_kobj = kobj_to_driver_kobj(kobj);
+ complete(&driver_kobj->kobj_unregister);
+}
+
+static ssize_t cpuidle_driver_show(struct kobject *kobj, struct attribute * attr,
+ char * buf)
+{
+ int ret = -EIO;
+ struct cpuidle_driver_kobj *driver_kobj = kobj_to_driver_kobj(kobj);
+ struct cpuidle_driver_attr *dattr = attr_to_driver_attr(attr);
+
+ if (dattr->show)
+ ret = dattr->show(driver_kobj->drv, buf);
+
+ return ret;
+}
+
+static ssize_t cpuidle_driver_store(struct kobject *kobj, struct attribute *attr,
+ const char *buf, size_t size)
+{
+ int ret = -EIO;
+ struct cpuidle_driver_kobj *driver_kobj = kobj_to_driver_kobj(kobj);
+ struct cpuidle_driver_attr *dattr = attr_to_driver_attr(attr);
+
+ if (dattr->store)
+ ret = dattr->store(driver_kobj->drv, buf, size);
+
+ return ret;
+}
+
+define_one_driver_ro(name, show_driver_name);
+
+static const struct sysfs_ops cpuidle_driver_sysfs_ops = {
+ .show = cpuidle_driver_show,
+ .store = cpuidle_driver_store,
+};
+
+static struct attribute *cpuidle_driver_default_attrs[] = {
+ &attr_driver_name.attr,
+ NULL
+};
+
+static struct kobj_type ktype_driver_cpuidle = {
+ .sysfs_ops = &cpuidle_driver_sysfs_ops,
+ .default_attrs = cpuidle_driver_default_attrs,
+ .release = cpuidle_driver_sysfs_release,
+};
+
+/**
+ * cpuidle_add_driver_sysfs - adds the driver name sysfs attribute
+ * @device: the target device
+ */
+static int cpuidle_add_driver_sysfs(struct cpuidle_device *dev)
+{
+ struct cpuidle_driver_kobj *kdrv;
+ struct cpuidle_driver *drv = cpuidle_get_cpu_driver(dev);
+ int ret;
+
+ kdrv = kzalloc(sizeof(*kdrv), GFP_KERNEL);
+ if (!kdrv)
+ return -ENOMEM;
+
+ kdrv->drv = drv;
+ init_completion(&kdrv->kobj_unregister);
+
+ ret = kobject_init_and_add(&kdrv->kobj, &ktype_driver_cpuidle,
+ &dev->kobj, "driver");
+ if (ret) {
+ kfree(kdrv);
+ return ret;
+ }
+
+ kobject_uevent(&kdrv->kobj, KOBJ_ADD);
+ dev->kobj_driver = kdrv;
+
+ return ret;
+}
+
+/**
+ * cpuidle_remove_driver_sysfs - removes the driver name sysfs attribute
+ * @device: the target device
+ */
+static void cpuidle_remove_driver_sysfs(struct cpuidle_device *dev)
+{
+ struct cpuidle_driver_kobj *kdrv = dev->kobj_driver;
+ kobject_put(&kdrv->kobj);
+ wait_for_completion(&kdrv->kobj_unregister);
+ kfree(kdrv);
+}
+#else
+static inline int cpuidle_add_driver_sysfs(struct cpuidle_device *dev)
+{
+ return 0;
+}
+
+static inline void cpuidle_remove_driver_sysfs(struct cpuidle_device *dev)
+{
+ ;
+}
+#endif
+
+/**
+ * cpuidle_add_device_sysfs - adds device specific sysfs attributes
+ * @device: the target device
+ */
+int cpuidle_add_device_sysfs(struct cpuidle_device *device)
+{
+ int ret;
+
+ ret = cpuidle_add_state_sysfs(device);
+ if (ret)
+ return ret;
+
+ ret = cpuidle_add_driver_sysfs(device);
+ if (ret)
+ cpuidle_remove_state_sysfs(device);
+ return ret;
+}
+
+/**
+ * cpuidle_remove_device_sysfs : removes device specific sysfs attributes
+ * @device : the target device
+ */
+void cpuidle_remove_device_sysfs(struct cpuidle_device *device)
+{
+ cpuidle_remove_driver_sysfs(device);
+ cpuidle_remove_state_sysfs(device);
+}
+
/**
* cpuidle_add_sysfs - creates a sysfs instance for the target device
* @dev: the target device
*/
-int cpuidle_add_sysfs(struct device *cpu_dev)
+int cpuidle_add_sysfs(struct cpuidle_device *dev)
{
- int cpu = cpu_dev->id;
- struct cpuidle_device *dev;
+ struct device *cpu_dev = get_cpu_device((unsigned long)dev->cpu);
int error;
- dev = per_cpu(cpuidle_devices, cpu);
+ init_completion(&dev->kobj_unregister);
+
error = kobject_init_and_add(&dev->kobj, &ktype_cpuidle, &cpu_dev->kobj,
"cpuidle");
if (!error)
@@ -426,11 +596,8 @@
* cpuidle_remove_sysfs - deletes a sysfs instance on the target device
* @dev: the target device
*/
-void cpuidle_remove_sysfs(struct device *cpu_dev)
+void cpuidle_remove_sysfs(struct cpuidle_device *dev)
{
- int cpu = cpu_dev->id;
- struct cpuidle_device *dev;
-
- dev = per_cpu(cpuidle_devices, cpu);
kobject_put(&dev->kobj);
+ wait_for_completion(&dev->kobj_unregister);
}
diff --git a/drivers/devfreq/Kconfig b/drivers/devfreq/Kconfig
index f6b0a6e2..0f079be 100644
--- a/drivers/devfreq/Kconfig
+++ b/drivers/devfreq/Kconfig
@@ -30,7 +30,7 @@
comment "DEVFREQ Governors"
config DEVFREQ_GOV_SIMPLE_ONDEMAND
- bool "Simple Ondemand"
+ tristate "Simple Ondemand"
help
Chooses frequency based on the recent load on the device. Works
similar as ONDEMAND governor of CPUFREQ does. A device with
@@ -39,7 +39,7 @@
values to the governor with data field at devfreq_add_device().
config DEVFREQ_GOV_PERFORMANCE
- bool "Performance"
+ tristate "Performance"
help
Sets the frequency at the maximum available frequency.
This governor always returns UINT_MAX as frequency so that
@@ -47,7 +47,7 @@
at any time.
config DEVFREQ_GOV_POWERSAVE
- bool "Powersave"
+ tristate "Powersave"
help
Sets the frequency at the minimum available frequency.
This governor always returns 0 as frequency so that
@@ -55,7 +55,7 @@
at any time.
config DEVFREQ_GOV_USERSPACE
- bool "Userspace"
+ tristate "Userspace"
help
Sets the frequency at the user specified one.
This governor returns the user configured frequency if there
diff --git a/drivers/devfreq/devfreq.c b/drivers/devfreq/devfreq.c
index b146d76..53766f3 100644
--- a/drivers/devfreq/devfreq.c
+++ b/drivers/devfreq/devfreq.c
@@ -27,21 +27,17 @@
#include <linux/hrtimer.h>
#include "governor.h"
-struct class *devfreq_class;
+static struct class *devfreq_class;
/*
- * devfreq_work periodically monitors every registered device.
- * The minimum polling interval is one jiffy. The polling interval is
- * determined by the minimum polling period among all polling devfreq
- * devices. The resolution of polling interval is one jiffy.
+ * devfreq core provides delayed work based load monitoring helper
+ * functions. Governors can use these or can implement their own
+ * monitoring mechanism.
*/
-static bool polling;
static struct workqueue_struct *devfreq_wq;
-static struct delayed_work devfreq_work;
-/* wait removing if this is to be removed */
-static struct devfreq *wait_remove_device;
-
+/* The list of all device-devfreq governors */
+static LIST_HEAD(devfreq_governor_list);
/* The list of all device-devfreq */
static LIST_HEAD(devfreq_list);
static DEFINE_MUTEX(devfreq_list_lock);
@@ -73,6 +69,79 @@
}
/**
+ * devfreq_get_freq_level() - Lookup freq_table for the frequency
+ * @devfreq: the devfreq instance
+ * @freq: the target frequency
+ */
+static int devfreq_get_freq_level(struct devfreq *devfreq, unsigned long freq)
+{
+ int lev;
+
+ for (lev = 0; lev < devfreq->profile->max_state; lev++)
+ if (freq == devfreq->profile->freq_table[lev])
+ return lev;
+
+ return -EINVAL;
+}
+
+/**
+ * devfreq_update_status() - Update statistics of devfreq behavior
+ * @devfreq: the devfreq instance
+ * @freq: the update target frequency
+ */
+static int devfreq_update_status(struct devfreq *devfreq, unsigned long freq)
+{
+ int lev, prev_lev;
+ unsigned long cur_time;
+
+ lev = devfreq_get_freq_level(devfreq, freq);
+ if (lev < 0)
+ return lev;
+
+ cur_time = jiffies;
+ devfreq->time_in_state[lev] +=
+ cur_time - devfreq->last_stat_updated;
+ if (freq != devfreq->previous_freq) {
+ prev_lev = devfreq_get_freq_level(devfreq,
+ devfreq->previous_freq);
+ devfreq->trans_table[(prev_lev *
+ devfreq->profile->max_state) + lev]++;
+ devfreq->total_trans++;
+ }
+ devfreq->last_stat_updated = cur_time;
+
+ return 0;
+}
+
+/**
+ * find_devfreq_governor() - find devfreq governor from name
+ * @name: name of the governor
+ *
+ * Search the list of devfreq governors and return the matched
+ * governor's pointer. devfreq_list_lock should be held by the caller.
+ */
+static struct devfreq_governor *find_devfreq_governor(const char *name)
+{
+ struct devfreq_governor *tmp_governor;
+
+ if (unlikely(IS_ERR_OR_NULL(name))) {
+ pr_err("DEVFREQ: %s: Invalid parameters\n", __func__);
+ return ERR_PTR(-EINVAL);
+ }
+ WARN(!mutex_is_locked(&devfreq_list_lock),
+ "devfreq_list_lock must be locked.");
+
+ list_for_each_entry(tmp_governor, &devfreq_governor_list, node) {
+ if (!strncmp(tmp_governor->name, name, DEVFREQ_NAME_LEN))
+ return tmp_governor;
+ }
+
+ return ERR_PTR(-ENODEV);
+}
+
+/* Load monitoring helper functions for governors use */
+
+/**
* update_devfreq() - Reevaluate the device and configure frequency.
* @devfreq: the devfreq instance.
*
@@ -90,6 +159,9 @@
return -EINVAL;
}
+ if (!devfreq->governor)
+ return -EINVAL;
+
/* Reevaluate the proper frequency */
err = devfreq->governor->get_target_freq(devfreq, &freq);
if (err)
@@ -116,16 +188,173 @@
if (err)
return err;
+ if (devfreq->profile->freq_table)
+ if (devfreq_update_status(devfreq, freq))
+ dev_err(&devfreq->dev,
+ "Couldn't update frequency transition information.\n");
+
devfreq->previous_freq = freq;
return err;
}
+EXPORT_SYMBOL(update_devfreq);
+
+/**
+ * devfreq_monitor() - Periodically poll devfreq objects.
+ * @work: the work struct used to run devfreq_monitor periodically.
+ *
+ */
+static void devfreq_monitor(struct work_struct *work)
+{
+ int err;
+ struct devfreq *devfreq = container_of(work,
+ struct devfreq, work.work);
+
+ mutex_lock(&devfreq->lock);
+ err = update_devfreq(devfreq);
+ if (err)
+ dev_err(&devfreq->dev, "dvfs failed with (%d) error\n", err);
+
+ queue_delayed_work(devfreq_wq, &devfreq->work,
+ msecs_to_jiffies(devfreq->profile->polling_ms));
+ mutex_unlock(&devfreq->lock);
+}
+
+/**
+ * devfreq_monitor_start() - Start load monitoring of devfreq instance
+ * @devfreq: the devfreq instance.
+ *
+ * Helper function for starting devfreq device load monitoing. By
+ * default delayed work based monitoring is supported. Function
+ * to be called from governor in response to DEVFREQ_GOV_START
+ * event when device is added to devfreq framework.
+ */
+void devfreq_monitor_start(struct devfreq *devfreq)
+{
+ INIT_DEFERRABLE_WORK(&devfreq->work, devfreq_monitor);
+ if (devfreq->profile->polling_ms)
+ queue_delayed_work(devfreq_wq, &devfreq->work,
+ msecs_to_jiffies(devfreq->profile->polling_ms));
+}
+EXPORT_SYMBOL(devfreq_monitor_start);
+
+/**
+ * devfreq_monitor_stop() - Stop load monitoring of a devfreq instance
+ * @devfreq: the devfreq instance.
+ *
+ * Helper function to stop devfreq device load monitoing. Function
+ * to be called from governor in response to DEVFREQ_GOV_STOP
+ * event when device is removed from devfreq framework.
+ */
+void devfreq_monitor_stop(struct devfreq *devfreq)
+{
+ cancel_delayed_work_sync(&devfreq->work);
+}
+EXPORT_SYMBOL(devfreq_monitor_stop);
+
+/**
+ * devfreq_monitor_suspend() - Suspend load monitoring of a devfreq instance
+ * @devfreq: the devfreq instance.
+ *
+ * Helper function to suspend devfreq device load monitoing. Function
+ * to be called from governor in response to DEVFREQ_GOV_SUSPEND
+ * event or when polling interval is set to zero.
+ *
+ * Note: Though this function is same as devfreq_monitor_stop(),
+ * intentionally kept separate to provide hooks for collecting
+ * transition statistics.
+ */
+void devfreq_monitor_suspend(struct devfreq *devfreq)
+{
+ mutex_lock(&devfreq->lock);
+ if (devfreq->stop_polling) {
+ mutex_unlock(&devfreq->lock);
+ return;
+ }
+
+ devfreq->stop_polling = true;
+ mutex_unlock(&devfreq->lock);
+ cancel_delayed_work_sync(&devfreq->work);
+}
+EXPORT_SYMBOL(devfreq_monitor_suspend);
+
+/**
+ * devfreq_monitor_resume() - Resume load monitoring of a devfreq instance
+ * @devfreq: the devfreq instance.
+ *
+ * Helper function to resume devfreq device load monitoing. Function
+ * to be called from governor in response to DEVFREQ_GOV_RESUME
+ * event or when polling interval is set to non-zero.
+ */
+void devfreq_monitor_resume(struct devfreq *devfreq)
+{
+ mutex_lock(&devfreq->lock);
+ if (!devfreq->stop_polling)
+ goto out;
+
+ if (!delayed_work_pending(&devfreq->work) &&
+ devfreq->profile->polling_ms)
+ queue_delayed_work(devfreq_wq, &devfreq->work,
+ msecs_to_jiffies(devfreq->profile->polling_ms));
+ devfreq->stop_polling = false;
+
+out:
+ mutex_unlock(&devfreq->lock);
+}
+EXPORT_SYMBOL(devfreq_monitor_resume);
+
+/**
+ * devfreq_interval_update() - Update device devfreq monitoring interval
+ * @devfreq: the devfreq instance.
+ * @delay: new polling interval to be set.
+ *
+ * Helper function to set new load monitoring polling interval. Function
+ * to be called from governor in response to DEVFREQ_GOV_INTERVAL event.
+ */
+void devfreq_interval_update(struct devfreq *devfreq, unsigned int *delay)
+{
+ unsigned int cur_delay = devfreq->profile->polling_ms;
+ unsigned int new_delay = *delay;
+
+ mutex_lock(&devfreq->lock);
+ devfreq->profile->polling_ms = new_delay;
+
+ if (devfreq->stop_polling)
+ goto out;
+
+ /* if new delay is zero, stop polling */
+ if (!new_delay) {
+ mutex_unlock(&devfreq->lock);
+ cancel_delayed_work_sync(&devfreq->work);
+ return;
+ }
+
+ /* if current delay is zero, start polling with new delay */
+ if (!cur_delay) {
+ queue_delayed_work(devfreq_wq, &devfreq->work,
+ msecs_to_jiffies(devfreq->profile->polling_ms));
+ goto out;
+ }
+
+ /* if current delay is greater than new delay, restart polling */
+ if (cur_delay > new_delay) {
+ mutex_unlock(&devfreq->lock);
+ cancel_delayed_work_sync(&devfreq->work);
+ mutex_lock(&devfreq->lock);
+ if (!devfreq->stop_polling)
+ queue_delayed_work(devfreq_wq, &devfreq->work,
+ msecs_to_jiffies(devfreq->profile->polling_ms));
+ }
+out:
+ mutex_unlock(&devfreq->lock);
+}
+EXPORT_SYMBOL(devfreq_interval_update);
/**
* devfreq_notifier_call() - Notify that the device frequency requirements
* has been changed out of devfreq framework.
- * @nb the notifier_block (supposed to be devfreq->nb)
- * @type not used
- * @devp not used
+ * @nb: the notifier_block (supposed to be devfreq->nb)
+ * @type: not used
+ * @devp: not used
*
* Called by a notifier that uses devfreq->nb.
*/
@@ -143,59 +372,34 @@
}
/**
- * _remove_devfreq() - Remove devfreq from the device.
+ * _remove_devfreq() - Remove devfreq from the list and release its resources.
* @devfreq: the devfreq struct
* @skip: skip calling device_unregister().
- *
- * Note that the caller should lock devfreq->lock before calling
- * this. _remove_devfreq() will unlock it and free devfreq
- * internally. devfreq_list_lock should be locked by the caller
- * as well (not relased at return)
- *
- * Lock usage:
- * devfreq->lock: locked before call.
- * unlocked at return (and freed)
- * devfreq_list_lock: locked before call.
- * kept locked at return.
- * if devfreq is centrally polled.
- *
- * Freed memory:
- * devfreq
*/
static void _remove_devfreq(struct devfreq *devfreq, bool skip)
{
- if (!mutex_is_locked(&devfreq->lock)) {
- WARN(true, "devfreq->lock must be locked by the caller.\n");
+ mutex_lock(&devfreq_list_lock);
+ if (IS_ERR(find_device_devfreq(devfreq->dev.parent))) {
+ mutex_unlock(&devfreq_list_lock);
+ dev_warn(&devfreq->dev, "releasing devfreq which doesn't exist\n");
return;
}
- if (!devfreq->governor->no_central_polling &&
- !mutex_is_locked(&devfreq_list_lock)) {
- WARN(true, "devfreq_list_lock must be locked by the caller.\n");
- return;
- }
+ list_del(&devfreq->node);
+ mutex_unlock(&devfreq_list_lock);
- if (devfreq->being_removed)
- return;
-
- devfreq->being_removed = true;
+ if (devfreq->governor)
+ devfreq->governor->event_handler(devfreq,
+ DEVFREQ_GOV_STOP, NULL);
if (devfreq->profile->exit)
devfreq->profile->exit(devfreq->dev.parent);
- if (devfreq->governor->exit)
- devfreq->governor->exit(devfreq);
-
if (!skip && get_device(&devfreq->dev)) {
device_unregister(&devfreq->dev);
put_device(&devfreq->dev);
}
- if (!devfreq->governor->no_central_polling)
- list_del(&devfreq->node);
-
- mutex_unlock(&devfreq->lock);
mutex_destroy(&devfreq->lock);
-
kfree(devfreq);
}
@@ -210,163 +414,39 @@
static void devfreq_dev_release(struct device *dev)
{
struct devfreq *devfreq = to_devfreq(dev);
- bool central_polling = !devfreq->governor->no_central_polling;
- /*
- * If devfreq_dev_release() was called by device_unregister() of
- * _remove_devfreq(), we cannot mutex_lock(&devfreq->lock) and
- * being_removed is already set. This also partially checks the case
- * where devfreq_dev_release() is called from a thread other than
- * the one called _remove_devfreq(); however, this case is
- * dealt completely with another following being_removed check.
- *
- * Because being_removed is never being
- * unset, we do not need to worry about race conditions on
- * being_removed.
- */
- if (devfreq->being_removed)
- return;
-
- if (central_polling)
- mutex_lock(&devfreq_list_lock);
-
- mutex_lock(&devfreq->lock);
-
- /*
- * Check being_removed flag again for the case where
- * devfreq_dev_release() was called in a thread other than the one
- * possibly called _remove_devfreq().
- */
- if (devfreq->being_removed) {
- mutex_unlock(&devfreq->lock);
- goto out;
- }
-
- /* devfreq->lock is unlocked and removed in _removed_devfreq() */
_remove_devfreq(devfreq, true);
-
-out:
- if (central_polling)
- mutex_unlock(&devfreq_list_lock);
-}
-
-/**
- * devfreq_monitor() - Periodically poll devfreq objects.
- * @work: the work struct used to run devfreq_monitor periodically.
- *
- */
-static void devfreq_monitor(struct work_struct *work)
-{
- static unsigned long last_polled_at;
- struct devfreq *devfreq, *tmp;
- int error;
- unsigned long jiffies_passed;
- unsigned long next_jiffies = ULONG_MAX, now = jiffies;
- struct device *dev;
-
- /* Initially last_polled_at = 0, polling every device at bootup */
- jiffies_passed = now - last_polled_at;
- last_polled_at = now;
- if (jiffies_passed == 0)
- jiffies_passed = 1;
-
- mutex_lock(&devfreq_list_lock);
- list_for_each_entry_safe(devfreq, tmp, &devfreq_list, node) {
- mutex_lock(&devfreq->lock);
- dev = devfreq->dev.parent;
-
- /* Do not remove tmp for a while */
- wait_remove_device = tmp;
-
- if (devfreq->governor->no_central_polling ||
- devfreq->next_polling == 0) {
- mutex_unlock(&devfreq->lock);
- continue;
- }
- mutex_unlock(&devfreq_list_lock);
-
- /*
- * Reduce more next_polling if devfreq_wq took an extra
- * delay. (i.e., CPU has been idled.)
- */
- if (devfreq->next_polling <= jiffies_passed) {
- error = update_devfreq(devfreq);
-
- /* Remove a devfreq with an error. */
- if (error && error != -EAGAIN) {
-
- dev_err(dev, "Due to update_devfreq error(%d), devfreq(%s) is removed from the device\n",
- error, devfreq->governor->name);
-
- /*
- * Unlock devfreq before locking the list
- * in order to avoid deadlock with
- * find_device_devfreq or others
- */
- mutex_unlock(&devfreq->lock);
- mutex_lock(&devfreq_list_lock);
- /* Check if devfreq is already removed */
- if (IS_ERR(find_device_devfreq(dev)))
- continue;
- mutex_lock(&devfreq->lock);
- /* This unlocks devfreq->lock and free it */
- _remove_devfreq(devfreq, false);
- continue;
- }
- devfreq->next_polling = devfreq->polling_jiffies;
- } else {
- devfreq->next_polling -= jiffies_passed;
- }
-
- if (devfreq->next_polling)
- next_jiffies = (next_jiffies > devfreq->next_polling) ?
- devfreq->next_polling : next_jiffies;
-
- mutex_unlock(&devfreq->lock);
- mutex_lock(&devfreq_list_lock);
- }
- wait_remove_device = NULL;
- mutex_unlock(&devfreq_list_lock);
-
- if (next_jiffies > 0 && next_jiffies < ULONG_MAX) {
- polling = true;
- queue_delayed_work(devfreq_wq, &devfreq_work, next_jiffies);
- } else {
- polling = false;
- }
}
/**
* devfreq_add_device() - Add devfreq feature to the device
* @dev: the device to add devfreq feature.
* @profile: device-specific profile to run devfreq.
- * @governor: the policy to choose frequency.
+ * @governor_name: name of the policy to choose frequency.
* @data: private data for the governor. The devfreq framework does not
* touch this value.
*/
struct devfreq *devfreq_add_device(struct device *dev,
struct devfreq_dev_profile *profile,
- const struct devfreq_governor *governor,
+ const char *governor_name,
void *data)
{
struct devfreq *devfreq;
+ struct devfreq_governor *governor;
int err = 0;
- if (!dev || !profile || !governor) {
+ if (!dev || !profile || !governor_name) {
dev_err(dev, "%s: Invalid parameters.\n", __func__);
return ERR_PTR(-EINVAL);
}
-
- if (!governor->no_central_polling) {
- mutex_lock(&devfreq_list_lock);
- devfreq = find_device_devfreq(dev);
- mutex_unlock(&devfreq_list_lock);
- if (!IS_ERR(devfreq)) {
- dev_err(dev, "%s: Unable to create devfreq for the device. It already has one.\n", __func__);
- err = -EINVAL;
- goto err_out;
- }
+ mutex_lock(&devfreq_list_lock);
+ devfreq = find_device_devfreq(dev);
+ mutex_unlock(&devfreq_list_lock);
+ if (!IS_ERR(devfreq)) {
+ dev_err(dev, "%s: Unable to create devfreq for the device. It already has one.\n", __func__);
+ err = -EINVAL;
+ goto err_out;
}
devfreq = kzalloc(sizeof(struct devfreq), GFP_KERNEL);
@@ -383,92 +463,316 @@
devfreq->dev.class = devfreq_class;
devfreq->dev.release = devfreq_dev_release;
devfreq->profile = profile;
- devfreq->governor = governor;
+ strncpy(devfreq->governor_name, governor_name, DEVFREQ_NAME_LEN);
devfreq->previous_freq = profile->initial_freq;
devfreq->data = data;
- devfreq->next_polling = devfreq->polling_jiffies
- = msecs_to_jiffies(devfreq->profile->polling_ms);
devfreq->nb.notifier_call = devfreq_notifier_call;
+ devfreq->trans_table = devm_kzalloc(dev, sizeof(unsigned int) *
+ devfreq->profile->max_state *
+ devfreq->profile->max_state,
+ GFP_KERNEL);
+ devfreq->time_in_state = devm_kzalloc(dev, sizeof(unsigned int) *
+ devfreq->profile->max_state,
+ GFP_KERNEL);
+ devfreq->last_stat_updated = jiffies;
+
dev_set_name(&devfreq->dev, dev_name(dev));
err = device_register(&devfreq->dev);
if (err) {
put_device(&devfreq->dev);
+ mutex_unlock(&devfreq->lock);
goto err_dev;
}
- if (governor->init)
- err = governor->init(devfreq);
- if (err)
- goto err_init;
-
mutex_unlock(&devfreq->lock);
- if (governor->no_central_polling)
- goto out;
-
mutex_lock(&devfreq_list_lock);
-
list_add(&devfreq->node, &devfreq_list);
- if (devfreq_wq && devfreq->next_polling && !polling) {
- polling = true;
- queue_delayed_work(devfreq_wq, &devfreq_work,
- devfreq->next_polling);
- }
+ governor = find_devfreq_governor(devfreq->governor_name);
+ if (!IS_ERR(governor))
+ devfreq->governor = governor;
+ if (devfreq->governor)
+ err = devfreq->governor->event_handler(devfreq,
+ DEVFREQ_GOV_START, NULL);
mutex_unlock(&devfreq_list_lock);
-out:
+ if (err) {
+ dev_err(dev, "%s: Unable to start governor for the device\n",
+ __func__);
+ goto err_init;
+ }
+
return devfreq;
err_init:
+ list_del(&devfreq->node);
device_unregister(&devfreq->dev);
err_dev:
- mutex_unlock(&devfreq->lock);
kfree(devfreq);
err_out:
return ERR_PTR(err);
}
+EXPORT_SYMBOL(devfreq_add_device);
/**
* devfreq_remove_device() - Remove devfreq feature from a device.
- * @devfreq the devfreq instance to be removed
+ * @devfreq: the devfreq instance to be removed
*/
int devfreq_remove_device(struct devfreq *devfreq)
{
- bool central_polling;
-
if (!devfreq)
return -EINVAL;
- central_polling = !devfreq->governor->no_central_polling;
-
- if (central_polling) {
- mutex_lock(&devfreq_list_lock);
- while (wait_remove_device == devfreq) {
- mutex_unlock(&devfreq_list_lock);
- schedule();
- mutex_lock(&devfreq_list_lock);
- }
- }
-
- mutex_lock(&devfreq->lock);
- _remove_devfreq(devfreq, false); /* it unlocks devfreq->lock */
-
- if (central_polling)
- mutex_unlock(&devfreq_list_lock);
+ _remove_devfreq(devfreq, false);
return 0;
}
+EXPORT_SYMBOL(devfreq_remove_device);
+
+/**
+ * devfreq_suspend_device() - Suspend devfreq of a device.
+ * @devfreq: the devfreq instance to be suspended
+ */
+int devfreq_suspend_device(struct devfreq *devfreq)
+{
+ if (!devfreq)
+ return -EINVAL;
+
+ if (!devfreq->governor)
+ return 0;
+
+ return devfreq->governor->event_handler(devfreq,
+ DEVFREQ_GOV_SUSPEND, NULL);
+}
+EXPORT_SYMBOL(devfreq_suspend_device);
+
+/**
+ * devfreq_resume_device() - Resume devfreq of a device.
+ * @devfreq: the devfreq instance to be resumed
+ */
+int devfreq_resume_device(struct devfreq *devfreq)
+{
+ if (!devfreq)
+ return -EINVAL;
+
+ if (!devfreq->governor)
+ return 0;
+
+ return devfreq->governor->event_handler(devfreq,
+ DEVFREQ_GOV_RESUME, NULL);
+}
+EXPORT_SYMBOL(devfreq_resume_device);
+
+/**
+ * devfreq_add_governor() - Add devfreq governor
+ * @governor: the devfreq governor to be added
+ */
+int devfreq_add_governor(struct devfreq_governor *governor)
+{
+ struct devfreq_governor *g;
+ struct devfreq *devfreq;
+ int err = 0;
+
+ if (!governor) {
+ pr_err("%s: Invalid parameters.\n", __func__);
+ return -EINVAL;
+ }
+
+ mutex_lock(&devfreq_list_lock);
+ g = find_devfreq_governor(governor->name);
+ if (!IS_ERR(g)) {
+ pr_err("%s: governor %s already registered\n", __func__,
+ g->name);
+ err = -EINVAL;
+ goto err_out;
+ }
+
+ list_add(&governor->node, &devfreq_governor_list);
+
+ list_for_each_entry(devfreq, &devfreq_list, node) {
+ int ret = 0;
+ struct device *dev = devfreq->dev.parent;
+
+ if (!strncmp(devfreq->governor_name, governor->name,
+ DEVFREQ_NAME_LEN)) {
+ /* The following should never occur */
+ if (devfreq->governor) {
+ dev_warn(dev,
+ "%s: Governor %s already present\n",
+ __func__, devfreq->governor->name);
+ ret = devfreq->governor->event_handler(devfreq,
+ DEVFREQ_GOV_STOP, NULL);
+ if (ret) {
+ dev_warn(dev,
+ "%s: Governor %s stop = %d\n",
+ __func__,
+ devfreq->governor->name, ret);
+ }
+ /* Fall through */
+ }
+ devfreq->governor = governor;
+ ret = devfreq->governor->event_handler(devfreq,
+ DEVFREQ_GOV_START, NULL);
+ if (ret) {
+ dev_warn(dev, "%s: Governor %s start=%d\n",
+ __func__, devfreq->governor->name,
+ ret);
+ }
+ }
+ }
+
+err_out:
+ mutex_unlock(&devfreq_list_lock);
+
+ return err;
+}
+EXPORT_SYMBOL(devfreq_add_governor);
+
+/**
+ * devfreq_remove_device() - Remove devfreq feature from a device.
+ * @governor: the devfreq governor to be removed
+ */
+int devfreq_remove_governor(struct devfreq_governor *governor)
+{
+ struct devfreq_governor *g;
+ struct devfreq *devfreq;
+ int err = 0;
+
+ if (!governor) {
+ pr_err("%s: Invalid parameters.\n", __func__);
+ return -EINVAL;
+ }
+
+ mutex_lock(&devfreq_list_lock);
+ g = find_devfreq_governor(governor->name);
+ if (IS_ERR(g)) {
+ pr_err("%s: governor %s not registered\n", __func__,
+ governor->name);
+ err = PTR_ERR(g);
+ goto err_out;
+ }
+ list_for_each_entry(devfreq, &devfreq_list, node) {
+ int ret;
+ struct device *dev = devfreq->dev.parent;
+
+ if (!strncmp(devfreq->governor_name, governor->name,
+ DEVFREQ_NAME_LEN)) {
+ /* we should have a devfreq governor! */
+ if (!devfreq->governor) {
+ dev_warn(dev, "%s: Governor %s NOT present\n",
+ __func__, governor->name);
+ continue;
+ /* Fall through */
+ }
+ ret = devfreq->governor->event_handler(devfreq,
+ DEVFREQ_GOV_STOP, NULL);
+ if (ret) {
+ dev_warn(dev, "%s: Governor %s stop=%d\n",
+ __func__, devfreq->governor->name,
+ ret);
+ }
+ devfreq->governor = NULL;
+ }
+ }
+
+ list_del(&governor->node);
+err_out:
+ mutex_unlock(&devfreq_list_lock);
+
+ return err;
+}
+EXPORT_SYMBOL(devfreq_remove_governor);
static ssize_t show_governor(struct device *dev,
struct device_attribute *attr, char *buf)
{
+ if (!to_devfreq(dev)->governor)
+ return -EINVAL;
+
return sprintf(buf, "%s\n", to_devfreq(dev)->governor->name);
}
+static ssize_t store_governor(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct devfreq *df = to_devfreq(dev);
+ int ret;
+ char str_governor[DEVFREQ_NAME_LEN + 1];
+ struct devfreq_governor *governor;
+
+ ret = sscanf(buf, "%" __stringify(DEVFREQ_NAME_LEN) "s", str_governor);
+ if (ret != 1)
+ return -EINVAL;
+
+ mutex_lock(&devfreq_list_lock);
+ governor = find_devfreq_governor(str_governor);
+ if (IS_ERR(governor)) {
+ ret = PTR_ERR(governor);
+ goto out;
+ }
+ if (df->governor == governor)
+ goto out;
+
+ if (df->governor) {
+ ret = df->governor->event_handler(df, DEVFREQ_GOV_STOP, NULL);
+ if (ret) {
+ dev_warn(dev, "%s: Governor %s not stopped(%d)\n",
+ __func__, df->governor->name, ret);
+ goto out;
+ }
+ }
+ df->governor = governor;
+ strncpy(df->governor_name, governor->name, DEVFREQ_NAME_LEN);
+ ret = df->governor->event_handler(df, DEVFREQ_GOV_START, NULL);
+ if (ret)
+ dev_warn(dev, "%s: Governor %s not started(%d)\n",
+ __func__, df->governor->name, ret);
+out:
+ mutex_unlock(&devfreq_list_lock);
+
+ if (!ret)
+ ret = count;
+ return ret;
+}
+static ssize_t show_available_governors(struct device *d,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct devfreq_governor *tmp_governor;
+ ssize_t count = 0;
+
+ mutex_lock(&devfreq_list_lock);
+ list_for_each_entry(tmp_governor, &devfreq_governor_list, node)
+ count += scnprintf(&buf[count], (PAGE_SIZE - count - 2),
+ "%s ", tmp_governor->name);
+ mutex_unlock(&devfreq_list_lock);
+
+ /* Truncate the trailing space */
+ if (count)
+ count--;
+
+ count += sprintf(&buf[count], "\n");
+
+ return count;
+}
+
static ssize_t show_freq(struct device *dev,
struct device_attribute *attr, char *buf)
{
+ unsigned long freq;
+ struct devfreq *devfreq = to_devfreq(dev);
+
+ if (devfreq->profile->get_cur_freq &&
+ !devfreq->profile->get_cur_freq(devfreq->dev.parent, &freq))
+ return sprintf(buf, "%lu\n", freq);
+
+ return sprintf(buf, "%lu\n", devfreq->previous_freq);
+}
+
+static ssize_t show_target_freq(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
return sprintf(buf, "%lu\n", to_devfreq(dev)->previous_freq);
}
@@ -486,39 +790,19 @@
unsigned int value;
int ret;
+ if (!df->governor)
+ return -EINVAL;
+
ret = sscanf(buf, "%u", &value);
if (ret != 1)
- goto out;
+ return -EINVAL;
- mutex_lock(&df->lock);
- df->profile->polling_ms = value;
- df->next_polling = df->polling_jiffies
- = msecs_to_jiffies(value);
- mutex_unlock(&df->lock);
-
+ df->governor->event_handler(df, DEVFREQ_GOV_INTERVAL, &value);
ret = count;
- if (df->governor->no_central_polling)
- goto out;
-
- mutex_lock(&devfreq_list_lock);
- if (df->next_polling > 0 && !polling) {
- polling = true;
- queue_delayed_work(devfreq_wq, &devfreq_work,
- df->next_polling);
- }
- mutex_unlock(&devfreq_list_lock);
-out:
return ret;
}
-static ssize_t show_central_polling(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- return sprintf(buf, "%d\n",
- !to_devfreq(dev)->governor->no_central_polling);
-}
-
static ssize_t store_min_freq(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
@@ -529,7 +813,7 @@
ret = sscanf(buf, "%lu", &value);
if (ret != 1)
- goto out;
+ return -EINVAL;
mutex_lock(&df->lock);
max = df->max_freq;
@@ -543,7 +827,6 @@
ret = count;
unlock:
mutex_unlock(&df->lock);
-out:
return ret;
}
@@ -563,7 +846,7 @@
ret = sscanf(buf, "%lu", &value);
if (ret != 1)
- goto out;
+ return -EINVAL;
mutex_lock(&df->lock);
min = df->min_freq;
@@ -577,7 +860,6 @@
ret = count;
unlock:
mutex_unlock(&df->lock);
-out:
return ret;
}
@@ -587,34 +869,92 @@
return sprintf(buf, "%lu\n", to_devfreq(dev)->max_freq);
}
+static ssize_t show_available_freqs(struct device *d,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct devfreq *df = to_devfreq(d);
+ struct device *dev = df->dev.parent;
+ struct opp *opp;
+ ssize_t count = 0;
+ unsigned long freq = 0;
+
+ rcu_read_lock();
+ do {
+ opp = opp_find_freq_ceil(dev, &freq);
+ if (IS_ERR(opp))
+ break;
+
+ count += scnprintf(&buf[count], (PAGE_SIZE - count - 2),
+ "%lu ", freq);
+ freq++;
+ } while (1);
+ rcu_read_unlock();
+
+ /* Truncate the trailing space */
+ if (count)
+ count--;
+
+ count += sprintf(&buf[count], "\n");
+
+ return count;
+}
+
+static ssize_t show_trans_table(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct devfreq *devfreq = to_devfreq(dev);
+ ssize_t len;
+ int i, j, err;
+ unsigned int max_state = devfreq->profile->max_state;
+
+ err = devfreq_update_status(devfreq, devfreq->previous_freq);
+ if (err)
+ return 0;
+
+ len = sprintf(buf, " From : To\n");
+ len += sprintf(buf + len, " :");
+ for (i = 0; i < max_state; i++)
+ len += sprintf(buf + len, "%8u",
+ devfreq->profile->freq_table[i]);
+
+ len += sprintf(buf + len, " time(ms)\n");
+
+ for (i = 0; i < max_state; i++) {
+ if (devfreq->profile->freq_table[i]
+ == devfreq->previous_freq) {
+ len += sprintf(buf + len, "*");
+ } else {
+ len += sprintf(buf + len, " ");
+ }
+ len += sprintf(buf + len, "%8u:",
+ devfreq->profile->freq_table[i]);
+ for (j = 0; j < max_state; j++)
+ len += sprintf(buf + len, "%8u",
+ devfreq->trans_table[(i * max_state) + j]);
+ len += sprintf(buf + len, "%10u\n",
+ jiffies_to_msecs(devfreq->time_in_state[i]));
+ }
+
+ len += sprintf(buf + len, "Total transition : %u\n",
+ devfreq->total_trans);
+ return len;
+}
+
static struct device_attribute devfreq_attrs[] = {
- __ATTR(governor, S_IRUGO, show_governor, NULL),
+ __ATTR(governor, S_IRUGO | S_IWUSR, show_governor, store_governor),
+ __ATTR(available_governors, S_IRUGO, show_available_governors, NULL),
__ATTR(cur_freq, S_IRUGO, show_freq, NULL),
- __ATTR(central_polling, S_IRUGO, show_central_polling, NULL),
+ __ATTR(available_frequencies, S_IRUGO, show_available_freqs, NULL),
+ __ATTR(target_freq, S_IRUGO, show_target_freq, NULL),
__ATTR(polling_interval, S_IRUGO | S_IWUSR, show_polling_interval,
store_polling_interval),
__ATTR(min_freq, S_IRUGO | S_IWUSR, show_min_freq, store_min_freq),
__ATTR(max_freq, S_IRUGO | S_IWUSR, show_max_freq, store_max_freq),
+ __ATTR(trans_stat, S_IRUGO, show_trans_table, NULL),
{ },
};
-/**
- * devfreq_start_polling() - Initialize data structure for devfreq framework and
- * start polling registered devfreq devices.
- */
-static int __init devfreq_start_polling(void)
-{
- mutex_lock(&devfreq_list_lock);
- polling = false;
- devfreq_wq = create_freezable_workqueue("devfreq_wq");
- INIT_DEFERRABLE_WORK(&devfreq_work, devfreq_monitor);
- mutex_unlock(&devfreq_list_lock);
-
- devfreq_monitor(&devfreq_work.work);
- return 0;
-}
-late_initcall(devfreq_start_polling);
-
static int __init devfreq_init(void)
{
devfreq_class = class_create(THIS_MODULE, "devfreq");
@@ -622,7 +962,15 @@
pr_err("%s: couldn't create class\n", __FILE__);
return PTR_ERR(devfreq_class);
}
+
+ devfreq_wq = create_freezable_workqueue("devfreq_wq");
+ if (IS_ERR(devfreq_wq)) {
+ class_destroy(devfreq_class);
+ pr_err("%s: couldn't create workqueue\n", __FILE__);
+ return PTR_ERR(devfreq_wq);
+ }
devfreq_class->dev_attrs = devfreq_attrs;
+
return 0;
}
subsys_initcall(devfreq_init);
@@ -630,6 +978,7 @@
static void __exit devfreq_exit(void)
{
class_destroy(devfreq_class);
+ destroy_workqueue(devfreq_wq);
}
module_exit(devfreq_exit);
@@ -641,9 +990,9 @@
/**
* devfreq_recommended_opp() - Helper function to get proper OPP for the
* freq value given to target callback.
- * @dev The devfreq user device. (parent of devfreq)
- * @freq The frequency given to target function
- * @flags Flags handed from devfreq framework.
+ * @dev: The devfreq user device. (parent of devfreq)
+ * @freq: The frequency given to target function
+ * @flags: Flags handed from devfreq framework.
*
*/
struct opp *devfreq_recommended_opp(struct device *dev, unsigned long *freq,
@@ -656,14 +1005,14 @@
opp = opp_find_freq_floor(dev, freq);
/* If not available, use the closest opp */
- if (opp == ERR_PTR(-ENODEV))
+ if (opp == ERR_PTR(-ERANGE))
opp = opp_find_freq_ceil(dev, freq);
} else {
/* The freq is an lower bound. opp should be higher */
opp = opp_find_freq_ceil(dev, freq);
/* If not available, use the closest opp */
- if (opp == ERR_PTR(-ENODEV))
+ if (opp == ERR_PTR(-ERANGE))
opp = opp_find_freq_floor(dev, freq);
}
@@ -674,35 +1023,49 @@
* devfreq_register_opp_notifier() - Helper function to get devfreq notified
* for any changes in the OPP availability
* changes
- * @dev The devfreq user device. (parent of devfreq)
- * @devfreq The devfreq object.
+ * @dev: The devfreq user device. (parent of devfreq)
+ * @devfreq: The devfreq object.
*/
int devfreq_register_opp_notifier(struct device *dev, struct devfreq *devfreq)
{
- struct srcu_notifier_head *nh = opp_get_notifier(dev);
+ struct srcu_notifier_head *nh;
+ int ret = 0;
+ rcu_read_lock();
+ nh = opp_get_notifier(dev);
if (IS_ERR(nh))
- return PTR_ERR(nh);
- return srcu_notifier_chain_register(nh, &devfreq->nb);
+ ret = PTR_ERR(nh);
+ rcu_read_unlock();
+ if (!ret)
+ ret = srcu_notifier_chain_register(nh, &devfreq->nb);
+
+ return ret;
}
/**
* devfreq_unregister_opp_notifier() - Helper function to stop getting devfreq
* notified for any changes in the OPP
* availability changes anymore.
- * @dev The devfreq user device. (parent of devfreq)
- * @devfreq The devfreq object.
+ * @dev: The devfreq user device. (parent of devfreq)
+ * @devfreq: The devfreq object.
*
* At exit() callback of devfreq_dev_profile, this must be included if
* devfreq_recommended_opp is used.
*/
int devfreq_unregister_opp_notifier(struct device *dev, struct devfreq *devfreq)
{
- struct srcu_notifier_head *nh = opp_get_notifier(dev);
+ struct srcu_notifier_head *nh;
+ int ret = 0;
+ rcu_read_lock();
+ nh = opp_get_notifier(dev);
if (IS_ERR(nh))
- return PTR_ERR(nh);
- return srcu_notifier_chain_unregister(nh, &devfreq->nb);
+ ret = PTR_ERR(nh);
+ rcu_read_unlock();
+ if (!ret)
+ ret = srcu_notifier_chain_unregister(nh, &devfreq->nb);
+
+ return ret;
}
MODULE_AUTHOR("MyungJoo Ham <myungjoo.ham@samsung.com>");
diff --git a/drivers/devfreq/exynos4_bus.c b/drivers/devfreq/exynos4_bus.c
index 88ddc77..7418372 100644
--- a/drivers/devfreq/exynos4_bus.c
+++ b/drivers/devfreq/exynos4_bus.c
@@ -987,7 +987,7 @@
struct device *dev = &pdev->dev;
int err = 0;
- data = kzalloc(sizeof(struct busfreq_data), GFP_KERNEL);
+ data = devm_kzalloc(&pdev->dev, sizeof(struct busfreq_data), GFP_KERNEL);
if (data == NULL) {
dev_err(dev, "Cannot allocate memory.\n");
return -ENOMEM;
@@ -1012,31 +1012,26 @@
err = -EINVAL;
}
if (err)
- goto err_regulator;
+ return err;
- data->vdd_int = regulator_get(dev, "vdd_int");
+ data->vdd_int = devm_regulator_get(dev, "vdd_int");
if (IS_ERR(data->vdd_int)) {
dev_err(dev, "Cannot get the regulator \"vdd_int\"\n");
- err = PTR_ERR(data->vdd_int);
- goto err_regulator;
+ return PTR_ERR(data->vdd_int);
}
if (data->type == TYPE_BUSF_EXYNOS4x12) {
- data->vdd_mif = regulator_get(dev, "vdd_mif");
+ data->vdd_mif = devm_regulator_get(dev, "vdd_mif");
if (IS_ERR(data->vdd_mif)) {
dev_err(dev, "Cannot get the regulator \"vdd_mif\"\n");
- err = PTR_ERR(data->vdd_mif);
- regulator_put(data->vdd_int);
- goto err_regulator;
-
+ return PTR_ERR(data->vdd_mif);
}
}
opp = opp_find_freq_floor(dev, &exynos4_devfreq_profile.initial_freq);
if (IS_ERR(opp)) {
dev_err(dev, "Invalid initial frequency %lu kHz.\n",
- exynos4_devfreq_profile.initial_freq);
- err = PTR_ERR(opp);
- goto err_opp_add;
+ exynos4_devfreq_profile.initial_freq);
+ return PTR_ERR(opp);
}
data->curr_opp = opp;
@@ -1045,30 +1040,20 @@
busfreq_mon_reset(data);
data->devfreq = devfreq_add_device(dev, &exynos4_devfreq_profile,
- &devfreq_simple_ondemand, NULL);
- if (IS_ERR(data->devfreq)) {
- err = PTR_ERR(data->devfreq);
- goto err_opp_add;
- }
+ "simple_ondemand", NULL);
+ if (IS_ERR(data->devfreq))
+ return PTR_ERR(data->devfreq);
devfreq_register_opp_notifier(dev, data->devfreq);
err = register_pm_notifier(&data->pm_notifier);
if (err) {
dev_err(dev, "Failed to setup pm notifier\n");
- goto err_devfreq_add;
+ devfreq_remove_device(data->devfreq);
+ return err;
}
return 0;
-err_devfreq_add:
- devfreq_remove_device(data->devfreq);
-err_opp_add:
- if (data->vdd_mif)
- regulator_put(data->vdd_mif);
- regulator_put(data->vdd_int);
-err_regulator:
- kfree(data);
- return err;
}
static __devexit int exynos4_busfreq_remove(struct platform_device *pdev)
@@ -1077,10 +1062,6 @@
unregister_pm_notifier(&data->pm_notifier);
devfreq_remove_device(data->devfreq);
- regulator_put(data->vdd_int);
- if (data->vdd_mif)
- regulator_put(data->vdd_mif);
- kfree(data);
return 0;
}
diff --git a/drivers/devfreq/governor.h b/drivers/devfreq/governor.h
index ea7f13c..fad7d63 100644
--- a/drivers/devfreq/governor.h
+++ b/drivers/devfreq/governor.h
@@ -18,7 +18,24 @@
#define to_devfreq(DEV) container_of((DEV), struct devfreq, dev)
+/* Devfreq events */
+#define DEVFREQ_GOV_START 0x1
+#define DEVFREQ_GOV_STOP 0x2
+#define DEVFREQ_GOV_INTERVAL 0x3
+#define DEVFREQ_GOV_SUSPEND 0x4
+#define DEVFREQ_GOV_RESUME 0x5
+
/* Caution: devfreq->lock must be locked before calling update_devfreq */
extern int update_devfreq(struct devfreq *devfreq);
+extern void devfreq_monitor_start(struct devfreq *devfreq);
+extern void devfreq_monitor_stop(struct devfreq *devfreq);
+extern void devfreq_monitor_suspend(struct devfreq *devfreq);
+extern void devfreq_monitor_resume(struct devfreq *devfreq);
+extern void devfreq_interval_update(struct devfreq *devfreq,
+ unsigned int *delay);
+
+extern int devfreq_add_governor(struct devfreq_governor *governor);
+extern int devfreq_remove_governor(struct devfreq_governor *governor);
+
#endif /* _GOVERNOR_H */
diff --git a/drivers/devfreq/governor_performance.c b/drivers/devfreq/governor_performance.c
index af75ddd..c72f942 100644
--- a/drivers/devfreq/governor_performance.c
+++ b/drivers/devfreq/governor_performance.c
@@ -10,6 +10,7 @@
*/
#include <linux/devfreq.h>
+#include <linux/module.h>
#include "governor.h"
static int devfreq_performance_func(struct devfreq *df,
@@ -26,14 +27,41 @@
return 0;
}
-static int performance_init(struct devfreq *devfreq)
+static int devfreq_performance_handler(struct devfreq *devfreq,
+ unsigned int event, void *data)
{
- return update_devfreq(devfreq);
+ int ret = 0;
+
+ if (event == DEVFREQ_GOV_START) {
+ mutex_lock(&devfreq->lock);
+ ret = update_devfreq(devfreq);
+ mutex_unlock(&devfreq->lock);
+ }
+
+ return ret;
}
-const struct devfreq_governor devfreq_performance = {
+static struct devfreq_governor devfreq_performance = {
.name = "performance",
- .init = performance_init,
.get_target_freq = devfreq_performance_func,
- .no_central_polling = true,
+ .event_handler = devfreq_performance_handler,
};
+
+static int __init devfreq_performance_init(void)
+{
+ return devfreq_add_governor(&devfreq_performance);
+}
+subsys_initcall(devfreq_performance_init);
+
+static void __exit devfreq_performance_exit(void)
+{
+ int ret;
+
+ ret = devfreq_remove_governor(&devfreq_performance);
+ if (ret)
+ pr_err("%s: failed remove governor %d\n", __func__, ret);
+
+ return;
+}
+module_exit(devfreq_performance_exit);
+MODULE_LICENSE("GPL");
diff --git a/drivers/devfreq/governor_powersave.c b/drivers/devfreq/governor_powersave.c
index fec0cdb..0c6bed5 100644
--- a/drivers/devfreq/governor_powersave.c
+++ b/drivers/devfreq/governor_powersave.c
@@ -10,6 +10,7 @@
*/
#include <linux/devfreq.h>
+#include <linux/module.h>
#include "governor.h"
static int devfreq_powersave_func(struct devfreq *df,
@@ -23,14 +24,41 @@
return 0;
}
-static int powersave_init(struct devfreq *devfreq)
+static int devfreq_powersave_handler(struct devfreq *devfreq,
+ unsigned int event, void *data)
{
- return update_devfreq(devfreq);
+ int ret = 0;
+
+ if (event == DEVFREQ_GOV_START) {
+ mutex_lock(&devfreq->lock);
+ ret = update_devfreq(devfreq);
+ mutex_unlock(&devfreq->lock);
+ }
+
+ return ret;
}
-const struct devfreq_governor devfreq_powersave = {
+static struct devfreq_governor devfreq_powersave = {
.name = "powersave",
- .init = powersave_init,
.get_target_freq = devfreq_powersave_func,
- .no_central_polling = true,
+ .event_handler = devfreq_powersave_handler,
};
+
+static int __init devfreq_powersave_init(void)
+{
+ return devfreq_add_governor(&devfreq_powersave);
+}
+subsys_initcall(devfreq_powersave_init);
+
+static void __exit devfreq_powersave_exit(void)
+{
+ int ret;
+
+ ret = devfreq_remove_governor(&devfreq_powersave);
+ if (ret)
+ pr_err("%s: failed remove governor %d\n", __func__, ret);
+
+ return;
+}
+module_exit(devfreq_powersave_exit);
+MODULE_LICENSE("GPL");
diff --git a/drivers/devfreq/governor_simpleondemand.c b/drivers/devfreq/governor_simpleondemand.c
index a2e3eae..0720ba8 100644
--- a/drivers/devfreq/governor_simpleondemand.c
+++ b/drivers/devfreq/governor_simpleondemand.c
@@ -10,8 +10,10 @@
*/
#include <linux/errno.h>
+#include <linux/module.h>
#include <linux/devfreq.h>
#include <linux/math64.h>
+#include "governor.h"
/* Default constants for DevFreq-Simple-Ondemand (DFSO) */
#define DFSO_UPTHRESHOLD (90)
@@ -88,7 +90,58 @@
return 0;
}
-const struct devfreq_governor devfreq_simple_ondemand = {
+static int devfreq_simple_ondemand_handler(struct devfreq *devfreq,
+ unsigned int event, void *data)
+{
+ switch (event) {
+ case DEVFREQ_GOV_START:
+ devfreq_monitor_start(devfreq);
+ break;
+
+ case DEVFREQ_GOV_STOP:
+ devfreq_monitor_stop(devfreq);
+ break;
+
+ case DEVFREQ_GOV_INTERVAL:
+ devfreq_interval_update(devfreq, (unsigned int *)data);
+ break;
+
+ case DEVFREQ_GOV_SUSPEND:
+ devfreq_monitor_suspend(devfreq);
+ break;
+
+ case DEVFREQ_GOV_RESUME:
+ devfreq_monitor_resume(devfreq);
+ break;
+
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+static struct devfreq_governor devfreq_simple_ondemand = {
.name = "simple_ondemand",
.get_target_freq = devfreq_simple_ondemand_func,
+ .event_handler = devfreq_simple_ondemand_handler,
};
+
+static int __init devfreq_simple_ondemand_init(void)
+{
+ return devfreq_add_governor(&devfreq_simple_ondemand);
+}
+subsys_initcall(devfreq_simple_ondemand_init);
+
+static void __exit devfreq_simple_ondemand_exit(void)
+{
+ int ret;
+
+ ret = devfreq_remove_governor(&devfreq_simple_ondemand);
+ if (ret)
+ pr_err("%s: failed remove governor %d\n", __func__, ret);
+
+ return;
+}
+module_exit(devfreq_simple_ondemand_exit);
+MODULE_LICENSE("GPL");
diff --git a/drivers/devfreq/governor_userspace.c b/drivers/devfreq/governor_userspace.c
index 0681246..35de6e8 100644
--- a/drivers/devfreq/governor_userspace.c
+++ b/drivers/devfreq/governor_userspace.c
@@ -14,6 +14,7 @@
#include <linux/devfreq.h>
#include <linux/pm.h>
#include <linux/mutex.h>
+#include <linux/module.h>
#include "governor.h"
struct userspace_data {
@@ -116,10 +117,46 @@
devfreq->data = NULL;
}
-const struct devfreq_governor devfreq_userspace = {
+static int devfreq_userspace_handler(struct devfreq *devfreq,
+ unsigned int event, void *data)
+{
+ int ret = 0;
+
+ switch (event) {
+ case DEVFREQ_GOV_START:
+ ret = userspace_init(devfreq);
+ break;
+ case DEVFREQ_GOV_STOP:
+ userspace_exit(devfreq);
+ break;
+ default:
+ break;
+ }
+
+ return ret;
+}
+
+static struct devfreq_governor devfreq_userspace = {
.name = "userspace",
.get_target_freq = devfreq_userspace_func,
- .init = userspace_init,
- .exit = userspace_exit,
- .no_central_polling = true,
+ .event_handler = devfreq_userspace_handler,
};
+
+static int __init devfreq_userspace_init(void)
+{
+ return devfreq_add_governor(&devfreq_userspace);
+}
+subsys_initcall(devfreq_userspace_init);
+
+static void __exit devfreq_userspace_exit(void)
+{
+ int ret;
+
+ ret = devfreq_remove_governor(&devfreq_userspace);
+ if (ret)
+ pr_err("%s: failed remove governor %d\n", __func__, ret);
+
+ return;
+}
+module_exit(devfreq_userspace_exit);
+MODULE_LICENSE("GPL");
diff --git a/drivers/dma/dw_dmac.c b/drivers/dma/dw_dmac.c
index c4b0eb3c..8f0b111 100644
--- a/drivers/dma/dw_dmac.c
+++ b/drivers/dma/dw_dmac.c
@@ -1462,7 +1462,7 @@
dw->chan[i].initialized = false;
}
-static int __devinit dw_probe(struct platform_device *pdev)
+static int dw_probe(struct platform_device *pdev)
{
struct dw_dma_platform_data *pdata;
struct resource *io;
@@ -1700,7 +1700,7 @@
#endif
static struct platform_driver dw_driver = {
- .remove = __devexit_p(dw_remove),
+ .remove = dw_remove,
.shutdown = dw_shutdown,
.driver = {
.name = "dw_dmac",
diff --git a/drivers/dma/edma.c b/drivers/dma/edma.c
index 05aea3c..232b458 100644
--- a/drivers/dma/edma.c
+++ b/drivers/dma/edma.c
@@ -545,7 +545,7 @@
INIT_LIST_HEAD(&dma->channels);
}
-static int __devinit edma_probe(struct platform_device *pdev)
+static int edma_probe(struct platform_device *pdev)
{
struct edma_cc *ecc;
int ret;
@@ -598,7 +598,7 @@
static struct platform_driver edma_driver = {
.probe = edma_probe,
- .remove = __devexit_p(edma_remove),
+ .remove = edma_remove,
.driver = {
.name = "edma-dma-engine",
.owner = THIS_MODULE,
diff --git a/drivers/dma/fsldma.c b/drivers/dma/fsldma.c
index 094437b..4fc2980 100644
--- a/drivers/dma/fsldma.c
+++ b/drivers/dma/fsldma.c
@@ -1221,7 +1221,7 @@
/* OpenFirmware Subsystem */
/*----------------------------------------------------------------------------*/
-static int __devinit fsl_dma_chan_probe(struct fsldma_device *fdev,
+static int fsl_dma_chan_probe(struct fsldma_device *fdev,
struct device_node *node, u32 feature, const char *compatible)
{
struct fsldma_chan *chan;
@@ -1324,7 +1324,7 @@
kfree(chan);
}
-static int __devinit fsldma_of_probe(struct platform_device *op)
+static int fsldma_of_probe(struct platform_device *op)
{
struct fsldma_device *fdev;
struct device_node *child;
diff --git a/drivers/dma/intel_mid_dma.c b/drivers/dma/intel_mid_dma.c
index 02b21d7..bc764af 100644
--- a/drivers/dma/intel_mid_dma.c
+++ b/drivers/dma/intel_mid_dma.c
@@ -1225,7 +1225,7 @@
* Initialize the PCI device, map BARs, query driver data.
* Call setup_dma to complete contoller and chan initilzation
*/
-static int __devinit intel_mid_dma_probe(struct pci_dev *pdev,
+static int intel_mid_dma_probe(struct pci_dev *pdev,
const struct pci_device_id *id)
{
struct middma_device *device;
@@ -1432,7 +1432,7 @@
.name = "Intel MID DMA",
.id_table = intel_mid_dma_ids,
.probe = intel_mid_dma_probe,
- .remove = __devexit_p(intel_mid_dma_remove),
+ .remove = intel_mid_dma_remove,
#ifdef CONFIG_PM
.driver = {
.pm = &intel_mid_dma_pm,
diff --git a/drivers/dma/ioat/pci.c b/drivers/dma/ioat/pci.c
index c057306..bfa9a35 100644
--- a/drivers/dma/ioat/pci.c
+++ b/drivers/dma/ioat/pci.c
@@ -125,7 +125,7 @@
.name = DRV_NAME,
.id_table = ioat_pci_tbl,
.probe = ioat_pci_probe,
- .remove = __devexit_p(ioat_remove),
+ .remove = ioat_remove,
};
static struct ioatdma_device *
diff --git a/drivers/dma/iop-adma.c b/drivers/dma/iop-adma.c
index 79e3eba..9072e17 100644
--- a/drivers/dma/iop-adma.c
+++ b/drivers/dma/iop-adma.c
@@ -968,7 +968,7 @@
*/
#define IOP_ADMA_TEST_SIZE 2000
-static int __devinit iop_adma_memcpy_self_test(struct iop_adma_device *device)
+static int iop_adma_memcpy_self_test(struct iop_adma_device *device)
{
int i;
void *src, *dest;
@@ -1042,7 +1042,7 @@
}
#define IOP_ADMA_NUM_SRC_TEST 4 /* must be <= 15 */
-static int __devinit
+static int
iop_adma_xor_val_self_test(struct iop_adma_device *device)
{
int i, src_idx;
@@ -1243,7 +1243,7 @@
}
#ifdef CONFIG_RAID6_PQ
-static int __devinit
+static int
iop_adma_pq_zero_sum_self_test(struct iop_adma_device *device)
{
/* combined sources, software pq results, and extra hw pq results */
@@ -1429,7 +1429,7 @@
return 0;
}
-static int __devinit iop_adma_probe(struct platform_device *pdev)
+static int iop_adma_probe(struct platform_device *pdev)
{
struct resource *res;
int ret = 0, i;
@@ -1711,7 +1711,7 @@
static struct platform_driver iop_adma_driver = {
.probe = iop_adma_probe,
- .remove = __devexit_p(iop_adma_remove),
+ .remove = iop_adma_remove,
.driver = {
.owner = THIS_MODULE,
.name = "iop-adma",
diff --git a/drivers/dma/mmp_pdma.c b/drivers/dma/mmp_pdma.c
index 14da1f4..13bdf4a 100644
--- a/drivers/dma/mmp_pdma.c
+++ b/drivers/dma/mmp_pdma.c
@@ -720,7 +720,7 @@
return 0;
}
-static int __devinit mmp_pdma_chan_init(struct mmp_pdma_device *pdev,
+static int mmp_pdma_chan_init(struct mmp_pdma_device *pdev,
int idx, int irq)
{
struct mmp_pdma_phy *phy = &pdev->phy[idx];
@@ -764,7 +764,7 @@
};
MODULE_DEVICE_TABLE(of, mmp_pdma_dt_ids);
-static int __devinit mmp_pdma_probe(struct platform_device *op)
+static int mmp_pdma_probe(struct platform_device *op)
{
struct mmp_pdma_device *pdev;
const struct of_device_id *of_id;
@@ -865,7 +865,7 @@
},
.id_table = mmp_pdma_id_table,
.probe = mmp_pdma_probe,
- .remove = __devexit_p(mmp_pdma_remove),
+ .remove = mmp_pdma_remove,
};
module_platform_driver(mmp_pdma_driver);
diff --git a/drivers/dma/mmp_tdma.c b/drivers/dma/mmp_tdma.c
index f3e8d71..323821c 100644
--- a/drivers/dma/mmp_tdma.c
+++ b/drivers/dma/mmp_tdma.c
@@ -475,7 +475,7 @@
return 0;
}
-static int __devinit mmp_tdma_chan_init(struct mmp_tdma_device *tdev,
+static int mmp_tdma_chan_init(struct mmp_tdma_device *tdev,
int idx, int irq, int type)
{
struct mmp_tdma_chan *tdmac;
@@ -515,7 +515,7 @@
};
MODULE_DEVICE_TABLE(of, mmp_tdma_dt_ids);
-static int __devinit mmp_tdma_probe(struct platform_device *pdev)
+static int mmp_tdma_probe(struct platform_device *pdev)
{
enum mmp_tdma_type type;
const struct of_device_id *of_id;
@@ -609,7 +609,7 @@
},
.id_table = mmp_tdma_id_table,
.probe = mmp_tdma_probe,
- .remove = __devexit_p(mmp_tdma_remove),
+ .remove = mmp_tdma_remove,
};
module_platform_driver(mmp_tdma_driver);
diff --git a/drivers/dma/mpc512x_dma.c b/drivers/dma/mpc512x_dma.c
index 2ab0a3d..2cd024a 100644
--- a/drivers/dma/mpc512x_dma.c
+++ b/drivers/dma/mpc512x_dma.c
@@ -641,7 +641,7 @@
return &mdesc->desc;
}
-static int __devinit mpc_dma_probe(struct platform_device *op)
+static int mpc_dma_probe(struct platform_device *op)
{
struct device_node *dn = op->dev.of_node;
struct device *dev = &op->dev;
@@ -818,7 +818,7 @@
static struct platform_driver mpc_dma_driver = {
.probe = mpc_dma_probe,
- .remove = __devexit_p(mpc_dma_remove),
+ .remove = mpc_dma_remove,
.driver = {
.name = DRV_NAME,
.owner = THIS_MODULE,
diff --git a/drivers/dma/mv_xor.c b/drivers/dma/mv_xor.c
index e362e2b..d12ad00 100644
--- a/drivers/dma/mv_xor.c
+++ b/drivers/dma/mv_xor.c
@@ -901,7 +901,7 @@
*/
#define MV_XOR_TEST_SIZE 2000
-static int __devinit mv_xor_memcpy_self_test(struct mv_xor_device *device)
+static int mv_xor_memcpy_self_test(struct mv_xor_device *device)
{
int i;
void *src, *dest;
@@ -975,7 +975,7 @@
}
#define MV_XOR_NUM_SRC_TEST 4 /* must be <= 15 */
-static int __devinit
+static int
mv_xor_xor_self_test(struct mv_xor_device *device)
{
int i, src_idx;
@@ -1100,7 +1100,7 @@
return 0;
}
-static int __devinit mv_xor_probe(struct platform_device *pdev)
+static int mv_xor_probe(struct platform_device *pdev)
{
int ret = 0;
int irq;
@@ -1262,7 +1262,7 @@
static struct platform_driver mv_xor_driver = {
.probe = mv_xor_probe,
- .remove = __devexit_p(mv_xor_remove),
+ .remove = mv_xor_remove,
.driver = {
.owner = THIS_MODULE,
.name = MV_XOR_NAME,
diff --git a/drivers/dma/pch_dma.c b/drivers/dma/pch_dma.c
index 987ab5c..eca1c4d 100644
--- a/drivers/dma/pch_dma.c
+++ b/drivers/dma/pch_dma.c
@@ -843,7 +843,7 @@
}
#endif
-static int __devinit pch_dma_probe(struct pci_dev *pdev,
+static int pch_dma_probe(struct pci_dev *pdev,
const struct pci_device_id *id)
{
struct pch_dma *pd;
@@ -1022,7 +1022,7 @@
.name = DRV_NAME,
.id_table = pch_dma_id_table,
.probe = pch_dma_probe,
- .remove = __devexit_p(pch_dma_remove),
+ .remove = pch_dma_remove,
#ifdef CONFIG_PM
.suspend = pch_dma_suspend,
.resume = pch_dma_resume,
diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c
index 665668b..95555f3 100644
--- a/drivers/dma/pl330.c
+++ b/drivers/dma/pl330.c
@@ -2851,7 +2851,7 @@
return IRQ_NONE;
}
-static int __devinit
+static int
pl330_probe(struct amba_device *adev, const struct amba_id *id)
{
struct dma_pl330_platdata *pdat;
diff --git a/drivers/dma/ppc4xx/adma.c b/drivers/dma/ppc4xx/adma.c
index f72348d..b94afc3 100644
--- a/drivers/dma/ppc4xx/adma.c
+++ b/drivers/dma/ppc4xx/adma.c
@@ -4361,7 +4361,7 @@
/**
* ppc440spe_adma_probe - probe the asynch device
*/
-static int __devinit ppc440spe_adma_probe(struct platform_device *ofdev)
+static int ppc440spe_adma_probe(struct platform_device *ofdev)
{
struct device_node *np = ofdev->dev.of_node;
struct resource res;
@@ -4914,7 +4914,7 @@
static struct platform_driver ppc440spe_adma_driver = {
.probe = ppc440spe_adma_probe,
- .remove = __devexit_p(ppc440spe_adma_remove),
+ .remove = ppc440spe_adma_remove,
.driver = {
.name = "PPC440SP(E)-ADMA",
.owner = THIS_MODULE,
diff --git a/drivers/dma/sa11x0-dma.c b/drivers/dma/sa11x0-dma.c
index b893159..2ad628d 100644
--- a/drivers/dma/sa11x0-dma.c
+++ b/drivers/dma/sa11x0-dma.c
@@ -826,7 +826,7 @@
CD(Ser4SSPRc, DDAR_RW),
};
-static int __devinit sa11x0_dma_init_dmadev(struct dma_device *dmadev,
+static int sa11x0_dma_init_dmadev(struct dma_device *dmadev,
struct device *dev)
{
unsigned i;
@@ -891,7 +891,7 @@
}
}
-static int __devinit sa11x0_dma_probe(struct platform_device *pdev)
+static int sa11x0_dma_probe(struct platform_device *pdev)
{
struct sa11x0_dma_dev *d;
struct resource *res;
@@ -1072,7 +1072,7 @@
.pm = &sa11x0_dma_pm_ops,
},
.probe = sa11x0_dma_probe,
- .remove = __devexit_p(sa11x0_dma_remove),
+ .remove = sa11x0_dma_remove,
};
bool sa11x0_dma_filter_fn(struct dma_chan *chan, void *param)
diff --git a/drivers/dma/sh/shdma.c b/drivers/dma/sh/shdma.c
index f41bcc5..8201bb4 100644
--- a/drivers/dma/sh/shdma.c
+++ b/drivers/dma/sh/shdma.c
@@ -483,7 +483,7 @@
.priority = 1,
};
-static int __devinit sh_dmae_chan_probe(struct sh_dmae_device *shdev, int id,
+static int sh_dmae_chan_probe(struct sh_dmae_device *shdev, int id,
int irq, unsigned long flags)
{
const struct sh_dmae_channel *chan_pdata = &shdev->pdata->channel[id];
@@ -646,7 +646,7 @@
.get_partial = sh_dmae_get_partial,
};
-static int __devinit sh_dmae_probe(struct platform_device *pdev)
+static int sh_dmae_probe(struct platform_device *pdev)
{
struct sh_dmae_pdata *pdata = pdev->dev.platform_data;
unsigned long irqflags = IRQF_DISABLED,
@@ -926,7 +926,7 @@
.pm = &sh_dmae_pm,
.name = SH_DMAE_DRV_NAME,
},
- .remove = __devexit_p(sh_dmae_remove),
+ .remove = sh_dmae_remove,
.shutdown = sh_dmae_shutdown,
};
diff --git a/drivers/dma/sirf-dma.c b/drivers/dma/sirf-dma.c
index d451caa..c3de6ed 100644
--- a/drivers/dma/sirf-dma.c
+++ b/drivers/dma/sirf-dma.c
@@ -550,7 +550,7 @@
}
EXPORT_SYMBOL(sirfsoc_dma_filter_id);
-static int __devinit sirfsoc_dma_probe(struct platform_device *op)
+static int sirfsoc_dma_probe(struct platform_device *op)
{
struct device_node *dn = op->dev.of_node;
struct device *dev = &op->dev;
@@ -673,7 +673,7 @@
static struct platform_driver sirfsoc_dma_driver = {
.probe = sirfsoc_dma_probe,
- .remove = __devexit_p(sirfsoc_dma_remove),
+ .remove = sirfsoc_dma_remove,
.driver = {
.name = DRV_NAME,
.owner = THIS_MODULE,
diff --git a/drivers/dma/tegra20-apb-dma.c b/drivers/dma/tegra20-apb-dma.c
index 528c62d..efdfffa 100644
--- a/drivers/dma/tegra20-apb-dma.c
+++ b/drivers/dma/tegra20-apb-dma.c
@@ -1197,7 +1197,7 @@
MODULE_DEVICE_TABLE(of, tegra_dma_of_match);
#endif
-static int __devinit tegra_dma_probe(struct platform_device *pdev)
+static int tegra_dma_probe(struct platform_device *pdev)
{
struct resource *res;
struct tegra_dma *tdma;
@@ -1418,7 +1418,7 @@
.of_match_table = of_match_ptr(tegra_dma_of_match),
},
.probe = tegra_dma_probe,
- .remove = __devexit_p(tegra_dma_remove),
+ .remove = tegra_dma_remove,
};
module_platform_driver(tegra_dmac_driver);
diff --git a/drivers/dma/timb_dma.c b/drivers/dma/timb_dma.c
index 4e0dff5..98cf51e 100644
--- a/drivers/dma/timb_dma.c
+++ b/drivers/dma/timb_dma.c
@@ -667,7 +667,7 @@
}
-static int __devinit td_probe(struct platform_device *pdev)
+static int td_probe(struct platform_device *pdev)
{
struct timb_dma_platform_data *pdata = pdev->dev.platform_data;
struct timb_dma *td;
diff --git a/drivers/extcon/extcon-adc-jack.c b/drivers/extcon/extcon-adc-jack.c
index e87196f..eda2a1aa 100644
--- a/drivers/extcon/extcon-adc-jack.c
+++ b/drivers/extcon/extcon-adc-jack.c
@@ -91,7 +91,7 @@
return IRQ_HANDLED;
}
-static int __devinit adc_jack_probe(struct platform_device *pdev)
+static int adc_jack_probe(struct platform_device *pdev)
{
struct adc_jack_data *data;
struct adc_jack_pdata *pdata = pdev->dev.platform_data;
@@ -175,7 +175,7 @@
return err;
}
-static int __devexit adc_jack_remove(struct platform_device *pdev)
+static int adc_jack_remove(struct platform_device *pdev)
{
struct adc_jack_data *data = platform_get_drvdata(pdev);
@@ -188,7 +188,7 @@
static struct platform_driver adc_jack_driver = {
.probe = adc_jack_probe,
- .remove = __devexit_p(adc_jack_remove),
+ .remove = adc_jack_remove,
.driver = {
.name = "adc-jack",
.owner = THIS_MODULE,
diff --git a/drivers/extcon/extcon-arizona.c b/drivers/extcon/extcon-arizona.c
index cdab9e5..f10f05d 100644
--- a/drivers/extcon/extcon-arizona.c
+++ b/drivers/extcon/extcon-arizona.c
@@ -337,7 +337,7 @@
return IRQ_HANDLED;
}
-static int __devinit arizona_extcon_probe(struct platform_device *pdev)
+static int arizona_extcon_probe(struct platform_device *pdev)
{
struct arizona *arizona = dev_get_drvdata(pdev->dev.parent);
struct arizona_pdata *pdata;
@@ -517,7 +517,7 @@
return ret;
}
-static int __devexit arizona_extcon_remove(struct platform_device *pdev)
+static int arizona_extcon_remove(struct platform_device *pdev)
{
struct arizona_extcon_info *info = platform_get_drvdata(pdev);
struct arizona *arizona = info->arizona;
@@ -544,7 +544,7 @@
.owner = THIS_MODULE,
},
.probe = arizona_extcon_probe,
- .remove = __devexit_p(arizona_extcon_remove),
+ .remove = arizona_extcon_remove,
};
module_platform_driver(arizona_extcon_driver);
diff --git a/drivers/extcon/extcon-gpio.c b/drivers/extcon/extcon-gpio.c
index 71d3ab7..1b14bfc 100644
--- a/drivers/extcon/extcon-gpio.c
+++ b/drivers/extcon/extcon-gpio.c
@@ -76,7 +76,7 @@
return -EINVAL;
}
-static int __devinit gpio_extcon_probe(struct platform_device *pdev)
+static int gpio_extcon_probe(struct platform_device *pdev)
{
struct gpio_extcon_platform_data *pdata = pdev->dev.platform_data;
struct gpio_extcon_data *extcon_data;
@@ -137,7 +137,7 @@
return ret;
}
-static int __devexit gpio_extcon_remove(struct platform_device *pdev)
+static int gpio_extcon_remove(struct platform_device *pdev)
{
struct gpio_extcon_data *extcon_data = platform_get_drvdata(pdev);
@@ -150,7 +150,7 @@
static struct platform_driver gpio_extcon_driver = {
.probe = gpio_extcon_probe,
- .remove = __devexit_p(gpio_extcon_remove),
+ .remove = gpio_extcon_remove,
.driver = {
.name = "extcon-gpio",
.owner = THIS_MODULE,
diff --git a/drivers/extcon/extcon-max77693.c b/drivers/extcon/extcon-max77693.c
index a17d0d9..b656dfa 100644
--- a/drivers/extcon/extcon-max77693.c
+++ b/drivers/extcon/extcon-max77693.c
@@ -648,7 +648,7 @@
return ret;
}
-static int __devinit max77693_muic_probe(struct platform_device *pdev)
+static int max77693_muic_probe(struct platform_device *pdev)
{
struct max77693_dev *max77693 = dev_get_drvdata(pdev->dev.parent);
struct max77693_platform_data *pdata = dev_get_platdata(max77693->dev);
@@ -774,7 +774,7 @@
return ret;
}
-static int __devexit max77693_muic_remove(struct platform_device *pdev)
+static int max77693_muic_remove(struct platform_device *pdev)
{
struct max77693_muic_info *info = platform_get_drvdata(pdev);
int i;
@@ -795,7 +795,7 @@
.owner = THIS_MODULE,
},
.probe = max77693_muic_probe,
- .remove = __devexit_p(max77693_muic_remove),
+ .remove = max77693_muic_remove,
};
module_platform_driver(max77693_muic_driver);
diff --git a/drivers/extcon/extcon-max8997.c b/drivers/extcon/extcon-max8997.c
index 77b66b0..bad76f5 100644
--- a/drivers/extcon/extcon-max8997.c
+++ b/drivers/extcon/extcon-max8997.c
@@ -426,7 +426,7 @@
max8997_muic_handle_charger_type(info, chg_type);
}
-static int __devinit max8997_muic_probe(struct platform_device *pdev)
+static int max8997_muic_probe(struct platform_device *pdev)
{
struct max8997_dev *max8997 = dev_get_drvdata(pdev->dev.parent);
struct max8997_platform_data *pdata = dev_get_platdata(max8997->dev);
@@ -508,7 +508,7 @@
return ret;
}
-static int __devexit max8997_muic_remove(struct platform_device *pdev)
+static int max8997_muic_remove(struct platform_device *pdev)
{
struct max8997_muic_info *info = platform_get_drvdata(pdev);
int i;
@@ -531,7 +531,7 @@
.owner = THIS_MODULE,
},
.probe = max8997_muic_probe,
- .remove = __devexit_p(max8997_muic_remove),
+ .remove = max8997_muic_remove,
};
module_platform_driver(max8997_muic_driver);
diff --git a/drivers/firewire/nosy.c b/drivers/firewire/nosy.c
index 4ebfb22..76b2d39 100644
--- a/drivers/firewire/nosy.c
+++ b/drivers/firewire/nosy.c
@@ -529,7 +529,7 @@
#define RCV_BUFFER_SIZE (16 * 1024)
-static int __devinit
+static int
add_card(struct pci_dev *dev, const struct pci_device_id *unused)
{
struct pcilynx *lynx;
@@ -683,7 +683,7 @@
return ret;
}
-static struct pci_device_id pci_table[] __devinitdata = {
+static struct pci_device_id pci_table[] = {
{
.vendor = PCI_VENDOR_ID_TI,
.device = PCI_DEVICE_ID_TI_PCILYNX,
diff --git a/drivers/firewire/ohci.c b/drivers/firewire/ohci.c
index 834e71d..f25610b 100644
--- a/drivers/firewire/ohci.c
+++ b/drivers/firewire/ohci.c
@@ -3537,7 +3537,7 @@
static inline void pmac_ohci_off(struct pci_dev *dev) {}
#endif /* CONFIG_PPC_PMAC */
-static int __devinit pci_probe(struct pci_dev *dev,
+static int pci_probe(struct pci_dev *dev,
const struct pci_device_id *ent)
{
struct fw_ohci *ohci;
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 47150f5..14a6c29 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -49,6 +49,10 @@
def_bool y
depends on OF
+config GPIO_ACPI
+ def_bool y
+ depends on ACPI
+
config DEBUG_GPIO
bool "Debug GPIO calls"
depends on DEBUG_KERNEL
@@ -86,11 +90,26 @@
help
Say yes here to enable the GPIO driver for the DA9052 chip.
+config GPIO_DA9055
+ tristate "Dialog Semiconductor DA9055 GPIO"
+ depends on MFD_DA9055
+ help
+ Say yes here to enable the GPIO driver for the DA9055 chip.
+
+ The Dialog DA9055 PMIC chip has 3 GPIO pins that can be
+ be controller by this driver.
+
+ If driver is built as a module it will be called gpio-da9055.
+
config GPIO_MAX730X
tristate
comment "Memory mapped GPIO drivers:"
+config GPIO_CLPS711X
+ def_bool y
+ depends on ARCH_CLPS711X
+
config GPIO_GENERIC_PLATFORM
tristate "Generic memory-mapped GPIO controller support (MMIO platform device)"
select GPIO_GENERIC
@@ -170,7 +189,7 @@
config GPIO_PL061
bool "PrimeCell PL061 GPIO support"
- depends on ARM_AMBA
+ depends on ARM && ARM_AMBA
select GENERIC_IRQ_CHIP
help
Say yes here to support the PrimeCell PL061 GPIO device
@@ -181,6 +200,13 @@
help
Say yes here to support the PXA GPIO device
+config GPIO_SPEAR_SPICS
+ bool "ST SPEAr13xx SPI Chip Select as GPIO support"
+ depends on PLAT_SPEAR
+ select GENERIC_IRQ_CHIP
+ help
+ Say yes here to support ST SPEAr SPI Chip Select as GPIO device
+
config GPIO_STA2X11
bool "STA2x11/ConneXt GPIO support"
depends on MFD_STA2X11
@@ -189,6 +215,14 @@
Say yes here to support the STA2x11/ConneXt GPIO device.
The GPIO module has 128 GPIO pins with alternate functions.
+config GPIO_TS5500
+ tristate "TS-5500 DIO blocks and compatibles"
+ help
+ This driver supports Digital I/O exposed by pin blocks found on some
+ Technologic Systems platforms. It includes, but is not limited to, 3
+ blocks of the TS-5500: DIO1, DIO2 and the LCD port, and the TS-5600
+ LCD port.
+
config GPIO_VT8500
bool "VIA/Wondermedia SoC GPIO Support"
depends on ARCH_VT8500
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 9aeed67..76b3446 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -4,6 +4,7 @@
obj-$(CONFIG_GPIOLIB) += gpiolib.o devres.o
obj-$(CONFIG_OF_GPIO) += gpiolib-of.o
+obj-$(CONFIG_GPIO_ACPI) += gpiolib-acpi.o
# Device drivers. Generally keep list sorted alphabetically
obj-$(CONFIG_GPIO_GENERIC) += gpio-generic.o
@@ -16,8 +17,10 @@
obj-$(CONFIG_GPIO_AMD8111) += gpio-amd8111.o
obj-$(CONFIG_GPIO_ARIZONA) += gpio-arizona.o
obj-$(CONFIG_GPIO_BT8XX) += gpio-bt8xx.o
+obj-$(CONFIG_GPIO_CLPS711X) += gpio-clps711x.o
obj-$(CONFIG_GPIO_CS5535) += gpio-cs5535.o
obj-$(CONFIG_GPIO_DA9052) += gpio-da9052.o
+obj-$(CONFIG_GPIO_DA9055) += gpio-da9055.o
obj-$(CONFIG_ARCH_DAVINCI) += gpio-davinci.o
obj-$(CONFIG_GPIO_EM) += gpio-em.o
obj-$(CONFIG_GPIO_EP93XX) += gpio-ep93xx.o
@@ -57,6 +60,7 @@
obj-$(CONFIG_ARCH_SA1100) += gpio-sa1100.o
obj-$(CONFIG_GPIO_SCH) += gpio-sch.o
obj-$(CONFIG_GPIO_SODAVILLE) += gpio-sodaville.o
+obj-$(CONFIG_GPIO_SPEAR_SPICS) += gpio-spear-spics.o
obj-$(CONFIG_GPIO_STA2X11) += gpio-sta2x11.o
obj-$(CONFIG_GPIO_STMPE) += gpio-stmpe.o
obj-$(CONFIG_GPIO_STP_XWAY) += gpio-stp-xway.o
@@ -68,6 +72,7 @@
obj-$(CONFIG_GPIO_TPS6586X) += gpio-tps6586x.o
obj-$(CONFIG_GPIO_TPS65910) += gpio-tps65910.o
obj-$(CONFIG_GPIO_TPS65912) += gpio-tps65912.o
+obj-$(CONFIG_GPIO_TS5500) += gpio-ts5500.o
obj-$(CONFIG_GPIO_TWL4030) += gpio-twl4030.o
obj-$(CONFIG_GPIO_TWL6040) += gpio-twl6040.o
obj-$(CONFIG_GPIO_UCB1400) += gpio-ucb1400.o
diff --git a/drivers/gpio/gpio-74x164.c b/drivers/gpio/gpio-74x164.c
index f05e542..464be96 100644
--- a/drivers/gpio/gpio-74x164.c
+++ b/drivers/gpio/gpio-74x164.c
@@ -105,7 +105,7 @@
return 0;
}
-static int __devinit gen_74x164_probe(struct spi_device *spi)
+static int gen_74x164_probe(struct spi_device *spi)
{
struct gen_74x164_chip *chip;
struct gen_74x164_chip_platform_data *pdata;
@@ -181,7 +181,7 @@
return ret;
}
-static int __devexit gen_74x164_remove(struct spi_device *spi)
+static int gen_74x164_remove(struct spi_device *spi)
{
struct gen_74x164_chip *chip;
int ret;
@@ -215,7 +215,7 @@
.of_match_table = of_match_ptr(gen_74x164_dt_ids),
},
.probe = gen_74x164_probe,
- .remove = __devexit_p(gen_74x164_remove),
+ .remove = gen_74x164_remove,
};
module_spi_driver(gen_74x164_driver);
diff --git a/drivers/gpio/gpio-ab8500.c b/drivers/gpio/gpio-ab8500.c
index 050c05d..983ad42 100644
--- a/drivers/gpio/gpio-ab8500.c
+++ b/drivers/gpio/gpio-ab8500.c
@@ -402,7 +402,7 @@
}
}
-static int __devinit ab8500_gpio_probe(struct platform_device *pdev)
+static int ab8500_gpio_probe(struct platform_device *pdev)
{
struct ab8500_platform_data *ab8500_pdata =
dev_get_platdata(pdev->dev.parent);
@@ -474,7 +474,7 @@
* ab8500_gpio_remove() - remove Ab8500-gpio driver
* @pdev : Platform device registered
*/
-static int __devexit ab8500_gpio_remove(struct platform_device *pdev)
+static int ab8500_gpio_remove(struct platform_device *pdev)
{
struct ab8500_gpio *ab8500_gpio = platform_get_drvdata(pdev);
int ret;
@@ -499,7 +499,7 @@
.owner = THIS_MODULE,
},
.probe = ab8500_gpio_probe,
- .remove = __devexit_p(ab8500_gpio_remove),
+ .remove = ab8500_gpio_remove,
};
static int __init ab8500_gpio_init(void)
diff --git a/drivers/gpio/gpio-adnp.c b/drivers/gpio/gpio-adnp.c
index 3df8833..e60567f 100644
--- a/drivers/gpio/gpio-adnp.c
+++ b/drivers/gpio/gpio-adnp.c
@@ -516,7 +516,7 @@
irq_domain_remove(adnp->domain);
}
-static __devinit int adnp_i2c_probe(struct i2c_client *client,
+static int adnp_i2c_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct device_node *np = client->dev.of_node;
@@ -563,7 +563,7 @@
return err;
}
-static __devexit int adnp_i2c_remove(struct i2c_client *client)
+static int adnp_i2c_remove(struct i2c_client *client)
{
struct adnp *adnp = i2c_get_clientdata(client);
struct device_node *np = client->dev.of_node;
@@ -582,13 +582,13 @@
return 0;
}
-static const struct i2c_device_id adnp_i2c_id[] __devinitconst = {
+static const struct i2c_device_id adnp_i2c_id[] = {
{ "gpio-adnp" },
{ },
};
MODULE_DEVICE_TABLE(i2c, adnp_i2c_id);
-static const struct of_device_id adnp_of_match[] __devinitconst = {
+static const struct of_device_id adnp_of_match[] = {
{ .compatible = "ad,gpio-adnp", },
{ },
};
@@ -601,7 +601,7 @@
.of_match_table = of_match_ptr(adnp_of_match),
},
.probe = adnp_i2c_probe,
- .remove = __devexit_p(adnp_i2c_remove),
+ .remove = adnp_i2c_remove,
.id_table = adnp_i2c_id,
};
module_i2c_driver(adnp_i2c_driver);
diff --git a/drivers/gpio/gpio-adp5520.c b/drivers/gpio/gpio-adp5520.c
index 2f263cc..8afa95f 100644
--- a/drivers/gpio/gpio-adp5520.c
+++ b/drivers/gpio/gpio-adp5520.c
@@ -87,7 +87,7 @@
return ret;
}
-static int __devinit adp5520_gpio_probe(struct platform_device *pdev)
+static int adp5520_gpio_probe(struct platform_device *pdev)
{
struct adp5520_gpio_platform_data *pdata = pdev->dev.platform_data;
struct adp5520_gpio *dev;
@@ -167,7 +167,7 @@
return ret;
}
-static int __devexit adp5520_gpio_remove(struct platform_device *pdev)
+static int adp5520_gpio_remove(struct platform_device *pdev)
{
struct adp5520_gpio *dev;
int ret;
@@ -190,7 +190,7 @@
.owner = THIS_MODULE,
},
.probe = adp5520_gpio_probe,
- .remove = __devexit_p(adp5520_gpio_remove),
+ .remove = adp5520_gpio_remove,
};
module_platform_driver(adp5520_gpio_driver);
diff --git a/drivers/gpio/gpio-adp5588.c b/drivers/gpio/gpio-adp5588.c
index eeedad4..2ba5698 100644
--- a/drivers/gpio/gpio-adp5588.c
+++ b/drivers/gpio/gpio-adp5588.c
@@ -346,7 +346,7 @@
}
#endif /* CONFIG_GPIO_ADP5588_IRQ */
-static int __devinit adp5588_gpio_probe(struct i2c_client *client,
+static int adp5588_gpio_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct adp5588_gpio_platform_data *pdata = client->dev.platform_data;
@@ -438,7 +438,7 @@
return ret;
}
-static int __devexit adp5588_gpio_remove(struct i2c_client *client)
+static int adp5588_gpio_remove(struct i2c_client *client)
{
struct adp5588_gpio_platform_data *pdata = client->dev.platform_data;
struct adp5588_gpio *dev = i2c_get_clientdata(client);
@@ -479,7 +479,7 @@
.name = DRV_NAME,
},
.probe = adp5588_gpio_probe,
- .remove = __devexit_p(adp5588_gpio_remove),
+ .remove = adp5588_gpio_remove,
.id_table = adp5588_gpio_id,
};
diff --git a/drivers/gpio/gpio-arizona.c b/drivers/gpio/gpio-arizona.c
index 8740d2e..0ea853f 100644
--- a/drivers/gpio/gpio-arizona.c
+++ b/drivers/gpio/gpio-arizona.c
@@ -94,7 +94,7 @@
.can_sleep = 1,
};
-static int __devinit arizona_gpio_probe(struct platform_device *pdev)
+static int arizona_gpio_probe(struct platform_device *pdev)
{
struct arizona *arizona = dev_get_drvdata(pdev->dev.parent);
struct arizona_pdata *pdata = arizona->dev->platform_data;
@@ -141,7 +141,7 @@
return ret;
}
-static int __devexit arizona_gpio_remove(struct platform_device *pdev)
+static int arizona_gpio_remove(struct platform_device *pdev)
{
struct arizona_gpio *arizona_gpio = platform_get_drvdata(pdev);
@@ -152,7 +152,7 @@
.driver.name = "arizona-gpio",
.driver.owner = THIS_MODULE,
.probe = arizona_gpio_probe,
- .remove = __devexit_p(arizona_gpio_remove),
+ .remove = arizona_gpio_remove,
};
module_platform_driver(arizona_gpio_driver);
diff --git a/drivers/gpio/gpio-clps711x.c b/drivers/gpio/gpio-clps711x.c
new file mode 100644
index 0000000..ce63b75
--- /dev/null
+++ b/drivers/gpio/gpio-clps711x.c
@@ -0,0 +1,199 @@
+/*
+ * CLPS711X GPIO driver
+ *
+ * Copyright (C) 2012 Alexander Shiyan <shc_work@mail.ru>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/gpio.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/platform_device.h>
+
+#include <mach/hardware.h>
+
+#define CLPS711X_GPIO_PORTS 5
+#define CLPS711X_GPIO_NAME "gpio-clps711x"
+
+struct clps711x_gpio {
+ struct gpio_chip chip[CLPS711X_GPIO_PORTS];
+ spinlock_t lock;
+};
+
+static void __iomem *clps711x_ports[] = {
+ CLPS711X_VIRT_BASE + PADR,
+ CLPS711X_VIRT_BASE + PBDR,
+ CLPS711X_VIRT_BASE + PCDR,
+ CLPS711X_VIRT_BASE + PDDR,
+ CLPS711X_VIRT_BASE + PEDR,
+};
+
+static void __iomem *clps711x_pdirs[] = {
+ CLPS711X_VIRT_BASE + PADDR,
+ CLPS711X_VIRT_BASE + PBDDR,
+ CLPS711X_VIRT_BASE + PCDDR,
+ CLPS711X_VIRT_BASE + PDDDR,
+ CLPS711X_VIRT_BASE + PEDDR,
+};
+
+#define clps711x_port(x) clps711x_ports[x->base / 8]
+#define clps711x_pdir(x) clps711x_pdirs[x->base / 8]
+
+static int gpio_clps711x_get(struct gpio_chip *chip, unsigned offset)
+{
+ return !!(readb(clps711x_port(chip)) & (1 << offset));
+}
+
+static void gpio_clps711x_set(struct gpio_chip *chip, unsigned offset,
+ int value)
+{
+ int tmp;
+ unsigned long flags;
+ struct clps711x_gpio *gpio = dev_get_drvdata(chip->dev);
+
+ spin_lock_irqsave(&gpio->lock, flags);
+ tmp = readb(clps711x_port(chip)) & ~(1 << offset);
+ if (value)
+ tmp |= 1 << offset;
+ writeb(tmp, clps711x_port(chip));
+ spin_unlock_irqrestore(&gpio->lock, flags);
+}
+
+static int gpio_clps711x_dir_in(struct gpio_chip *chip, unsigned offset)
+{
+ int tmp;
+ unsigned long flags;
+ struct clps711x_gpio *gpio = dev_get_drvdata(chip->dev);
+
+ spin_lock_irqsave(&gpio->lock, flags);
+ tmp = readb(clps711x_pdir(chip)) & ~(1 << offset);
+ writeb(tmp, clps711x_pdir(chip));
+ spin_unlock_irqrestore(&gpio->lock, flags);
+
+ return 0;
+}
+
+static int gpio_clps711x_dir_out(struct gpio_chip *chip, unsigned offset,
+ int value)
+{
+ int tmp;
+ unsigned long flags;
+ struct clps711x_gpio *gpio = dev_get_drvdata(chip->dev);
+
+ spin_lock_irqsave(&gpio->lock, flags);
+ tmp = readb(clps711x_pdir(chip)) | (1 << offset);
+ writeb(tmp, clps711x_pdir(chip));
+ tmp = readb(clps711x_port(chip)) & ~(1 << offset);
+ if (value)
+ tmp |= 1 << offset;
+ writeb(tmp, clps711x_port(chip));
+ spin_unlock_irqrestore(&gpio->lock, flags);
+
+ return 0;
+}
+
+static int gpio_clps711x_dir_in_inv(struct gpio_chip *chip, unsigned offset)
+{
+ int tmp;
+ unsigned long flags;
+ struct clps711x_gpio *gpio = dev_get_drvdata(chip->dev);
+
+ spin_lock_irqsave(&gpio->lock, flags);
+ tmp = readb(clps711x_pdir(chip)) | (1 << offset);
+ writeb(tmp, clps711x_pdir(chip));
+ spin_unlock_irqrestore(&gpio->lock, flags);
+
+ return 0;
+}
+
+static int gpio_clps711x_dir_out_inv(struct gpio_chip *chip, unsigned offset,
+ int value)
+{
+ int tmp;
+ unsigned long flags;
+ struct clps711x_gpio *gpio = dev_get_drvdata(chip->dev);
+
+ spin_lock_irqsave(&gpio->lock, flags);
+ tmp = readb(clps711x_pdir(chip)) & ~(1 << offset);
+ writeb(tmp, clps711x_pdir(chip));
+ tmp = readb(clps711x_port(chip)) & ~(1 << offset);
+ if (value)
+ tmp |= 1 << offset;
+ writeb(tmp, clps711x_port(chip));
+ spin_unlock_irqrestore(&gpio->lock, flags);
+
+ return 0;
+}
+
+static struct {
+ char *name;
+ int nr;
+ int inv_dir;
+} clps711x_gpio_ports[] __initconst = {
+ { "PORTA", 8, 0, },
+ { "PORTB", 8, 0, },
+ { "PORTC", 8, 0, },
+ { "PORTD", 8, 1, },
+ { "PORTE", 3, 0, },
+};
+
+static int __init gpio_clps711x_init(void)
+{
+ int i;
+ struct platform_device *pdev;
+ struct clps711x_gpio *gpio;
+
+ pdev = platform_device_alloc(CLPS711X_GPIO_NAME, 0);
+ if (!pdev) {
+ pr_err("Cannot create platform device: %s\n",
+ CLPS711X_GPIO_NAME);
+ return -ENOMEM;
+ }
+
+ platform_device_add(pdev);
+
+ gpio = devm_kzalloc(&pdev->dev, sizeof(struct clps711x_gpio),
+ GFP_KERNEL);
+ if (!gpio) {
+ dev_err(&pdev->dev, "GPIO allocating memory error\n");
+ platform_device_unregister(pdev);
+ return -ENOMEM;
+ }
+
+ platform_set_drvdata(pdev, gpio);
+
+ spin_lock_init(&gpio->lock);
+
+ for (i = 0; i < CLPS711X_GPIO_PORTS; i++) {
+ gpio->chip[i].owner = THIS_MODULE;
+ gpio->chip[i].dev = &pdev->dev;
+ gpio->chip[i].label = clps711x_gpio_ports[i].name;
+ gpio->chip[i].base = i * 8;
+ gpio->chip[i].ngpio = clps711x_gpio_ports[i].nr;
+ gpio->chip[i].get = gpio_clps711x_get;
+ gpio->chip[i].set = gpio_clps711x_set;
+ if (!clps711x_gpio_ports[i].inv_dir) {
+ gpio->chip[i].direction_input = gpio_clps711x_dir_in;
+ gpio->chip[i].direction_output = gpio_clps711x_dir_out;
+ } else {
+ gpio->chip[i].direction_input = gpio_clps711x_dir_in_inv;
+ gpio->chip[i].direction_output = gpio_clps711x_dir_out_inv;
+ }
+ WARN_ON(gpiochip_add(&gpio->chip[i]));
+ }
+
+ dev_info(&pdev->dev, "GPIO driver initialized\n");
+
+ return 0;
+}
+arch_initcall(gpio_clps711x_init);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Alexander Shiyan <shc_work@mail.ru>");
+MODULE_DESCRIPTION("CLPS711X GPIO driver");
diff --git a/drivers/gpio/gpio-cs5535.c b/drivers/gpio/gpio-cs5535.c
index 19eda1b..c0a3aeb 100644
--- a/drivers/gpio/gpio-cs5535.c
+++ b/drivers/gpio/gpio-cs5535.c
@@ -300,7 +300,7 @@
},
};
-static int __devinit cs5535_gpio_probe(struct platform_device *pdev)
+static int cs5535_gpio_probe(struct platform_device *pdev)
{
struct resource *res;
int err = -EIO;
@@ -355,7 +355,7 @@
return err;
}
-static int __devexit cs5535_gpio_remove(struct platform_device *pdev)
+static int cs5535_gpio_remove(struct platform_device *pdev)
{
struct resource *r;
int err;
@@ -378,7 +378,7 @@
.owner = THIS_MODULE,
},
.probe = cs5535_gpio_probe,
- .remove = __devexit_p(cs5535_gpio_remove),
+ .remove = cs5535_gpio_remove,
};
module_platform_driver(cs5535_gpio_driver);
diff --git a/drivers/gpio/gpio-da9052.c b/drivers/gpio/gpio-da9052.c
index 24b8c29..a05aacd 100644
--- a/drivers/gpio/gpio-da9052.c
+++ b/drivers/gpio/gpio-da9052.c
@@ -188,7 +188,7 @@
return da9052->irq_base + DA9052_IRQ_GPI0 + offset;
}
-static struct gpio_chip reference_gp __devinitdata = {
+static struct gpio_chip reference_gp = {
.label = "da9052-gpio",
.owner = THIS_MODULE,
.get = da9052_gpio_get,
@@ -201,7 +201,7 @@
.base = -1,
};
-static int __devinit da9052_gpio_probe(struct platform_device *pdev)
+static int da9052_gpio_probe(struct platform_device *pdev)
{
struct da9052_gpio *gpio;
struct da9052_pdata *pdata;
@@ -229,7 +229,7 @@
return 0;
}
-static int __devexit da9052_gpio_remove(struct platform_device *pdev)
+static int da9052_gpio_remove(struct platform_device *pdev)
{
struct da9052_gpio *gpio = platform_get_drvdata(pdev);
@@ -238,7 +238,7 @@
static struct platform_driver da9052_gpio_driver = {
.probe = da9052_gpio_probe,
- .remove = __devexit_p(da9052_gpio_remove),
+ .remove = da9052_gpio_remove,
.driver = {
.name = "da9052-gpio",
.owner = THIS_MODULE,
diff --git a/drivers/gpio/gpio-da9055.c b/drivers/gpio/gpio-da9055.c
new file mode 100644
index 0000000..55d83c7
--- /dev/null
+++ b/drivers/gpio/gpio-da9055.c
@@ -0,0 +1,204 @@
+/*
+ * GPIO Driver for Dialog DA9055 PMICs.
+ *
+ * Copyright(c) 2012 Dialog Semiconductor Ltd.
+ *
+ * Author: David Dajun Chen <dchen@diasemi.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+#include <linux/mfd/da9055/core.h>
+#include <linux/mfd/da9055/reg.h>
+#include <linux/mfd/da9055/pdata.h>
+
+#define DA9055_VDD_IO 0x0
+#define DA9055_PUSH_PULL 0x3
+#define DA9055_ACT_LOW 0x0
+#define DA9055_GPI 0x1
+#define DA9055_PORT_MASK 0x3
+#define DA9055_PORT_SHIFT(offset) (4 * (offset % 2))
+
+#define DA9055_INPUT DA9055_GPI
+#define DA9055_OUTPUT DA9055_PUSH_PULL
+#define DA9055_IRQ_GPI0 3
+
+struct da9055_gpio {
+ struct da9055 *da9055;
+ struct gpio_chip gp;
+};
+
+static inline struct da9055_gpio *to_da9055_gpio(struct gpio_chip *chip)
+{
+ return container_of(chip, struct da9055_gpio, gp);
+}
+
+static int da9055_gpio_get(struct gpio_chip *gc, unsigned offset)
+{
+ struct da9055_gpio *gpio = to_da9055_gpio(gc);
+ int gpio_direction = 0;
+ int ret;
+
+ /* Get GPIO direction */
+ ret = da9055_reg_read(gpio->da9055, (offset >> 1) + DA9055_REG_GPIO0_1);
+ if (ret < 0)
+ return ret;
+
+ gpio_direction = ret & (DA9055_PORT_MASK) << DA9055_PORT_SHIFT(offset);
+ gpio_direction >>= DA9055_PORT_SHIFT(offset);
+ switch (gpio_direction) {
+ case DA9055_INPUT:
+ ret = da9055_reg_read(gpio->da9055, DA9055_REG_STATUS_B);
+ if (ret < 0)
+ return ret;
+ break;
+ case DA9055_OUTPUT:
+ ret = da9055_reg_read(gpio->da9055, DA9055_REG_GPIO_MODE0_2);
+ if (ret < 0)
+ return ret;
+ }
+
+ return ret & (1 << offset);
+
+}
+
+static void da9055_gpio_set(struct gpio_chip *gc, unsigned offset, int value)
+{
+ struct da9055_gpio *gpio = to_da9055_gpio(gc);
+
+ da9055_reg_update(gpio->da9055,
+ DA9055_REG_GPIO_MODE0_2,
+ 1 << offset,
+ value << offset);
+}
+
+static int da9055_gpio_direction_input(struct gpio_chip *gc, unsigned offset)
+{
+ struct da9055_gpio *gpio = to_da9055_gpio(gc);
+ unsigned char reg_byte;
+
+ reg_byte = (DA9055_ACT_LOW | DA9055_GPI)
+ << DA9055_PORT_SHIFT(offset);
+
+ return da9055_reg_update(gpio->da9055, (offset >> 1) +
+ DA9055_REG_GPIO0_1,
+ DA9055_PORT_MASK <<
+ DA9055_PORT_SHIFT(offset),
+ reg_byte);
+}
+
+static int da9055_gpio_direction_output(struct gpio_chip *gc,
+ unsigned offset, int value)
+{
+ struct da9055_gpio *gpio = to_da9055_gpio(gc);
+ unsigned char reg_byte;
+ int ret;
+
+ reg_byte = (DA9055_VDD_IO | DA9055_PUSH_PULL)
+ << DA9055_PORT_SHIFT(offset);
+
+ ret = da9055_reg_update(gpio->da9055, (offset >> 1) +
+ DA9055_REG_GPIO0_1,
+ DA9055_PORT_MASK <<
+ DA9055_PORT_SHIFT(offset),
+ reg_byte);
+ if (ret < 0)
+ return ret;
+
+ da9055_gpio_set(gc, offset, value);
+
+ return 0;
+}
+
+static int da9055_gpio_to_irq(struct gpio_chip *gc, u32 offset)
+{
+ struct da9055_gpio *gpio = to_da9055_gpio(gc);
+ struct da9055 *da9055 = gpio->da9055;
+
+ return regmap_irq_get_virq(da9055->irq_data,
+ DA9055_IRQ_GPI0 + offset);
+}
+
+static struct gpio_chip reference_gp __devinitdata = {
+ .label = "da9055-gpio",
+ .owner = THIS_MODULE,
+ .get = da9055_gpio_get,
+ .set = da9055_gpio_set,
+ .direction_input = da9055_gpio_direction_input,
+ .direction_output = da9055_gpio_direction_output,
+ .to_irq = da9055_gpio_to_irq,
+ .can_sleep = 1,
+ .ngpio = 3,
+ .base = -1,
+};
+
+static int __devinit da9055_gpio_probe(struct platform_device *pdev)
+{
+ struct da9055_gpio *gpio;
+ struct da9055_pdata *pdata;
+ int ret;
+
+ gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL);
+ if (gpio == NULL)
+ return -ENOMEM;
+
+ gpio->da9055 = dev_get_drvdata(pdev->dev.parent);
+ pdata = gpio->da9055->dev->platform_data;
+
+ gpio->gp = reference_gp;
+ if (pdata && pdata->gpio_base)
+ gpio->gp.base = pdata->gpio_base;
+
+ ret = gpiochip_add(&gpio->gp);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Could not register gpiochip, %d\n", ret);
+ goto err_mem;
+ }
+
+ platform_set_drvdata(pdev, gpio);
+
+ return 0;
+
+err_mem:
+ return ret;
+}
+
+static int __devexit da9055_gpio_remove(struct platform_device *pdev)
+{
+ struct da9055_gpio *gpio = platform_get_drvdata(pdev);
+
+ return gpiochip_remove(&gpio->gp);
+}
+
+static struct platform_driver da9055_gpio_driver = {
+ .probe = da9055_gpio_probe,
+ .remove = __devexit_p(da9055_gpio_remove),
+ .driver = {
+ .name = "da9055-gpio",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init da9055_gpio_init(void)
+{
+ return platform_driver_register(&da9055_gpio_driver);
+}
+subsys_initcall(da9055_gpio_init);
+
+static void __exit da9055_gpio_exit(void)
+{
+ platform_driver_unregister(&da9055_gpio_driver);
+}
+module_exit(da9055_gpio_exit);
+
+MODULE_AUTHOR("David Dajun Chen <dchen@diasemi.com>");
+MODULE_DESCRIPTION("DA9055 GPIO Device Driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:da9055-gpio");
diff --git a/drivers/gpio/gpio-em.c b/drivers/gpio/gpio-em.c
index efb4c2d..bdc8302 100644
--- a/drivers/gpio/gpio-em.c
+++ b/drivers/gpio/gpio-em.c
@@ -35,7 +35,6 @@
struct em_gio_priv {
void __iomem *base0;
void __iomem *base1;
- unsigned int irq_base;
spinlock_t sense_lock;
struct platform_device *pdev;
struct gpio_chip gpio_chip;
@@ -214,7 +213,7 @@
static int em_gio_to_irq(struct gpio_chip *chip, unsigned offset)
{
- return irq_find_mapping(gpio_to_priv(chip)->irq_domain, offset);
+ return irq_create_mapping(gpio_to_priv(chip)->irq_domain, offset);
}
static int em_gio_irq_domain_map(struct irq_domain *h, unsigned int virq,
@@ -234,41 +233,7 @@
.map = em_gio_irq_domain_map,
};
-static int __devinit em_gio_irq_domain_init(struct em_gio_priv *p)
-{
- struct platform_device *pdev = p->pdev;
- struct gpio_em_config *pdata = pdev->dev.platform_data;
-
- p->irq_base = irq_alloc_descs(pdata->irq_base, 0,
- pdata->number_of_pins, numa_node_id());
- if (p->irq_base < 0) {
- dev_err(&pdev->dev, "cannot get irq_desc\n");
- return p->irq_base;
- }
- pr_debug("gio: hw base = %d, nr = %d, sw base = %d\n",
- pdata->gpio_base, pdata->number_of_pins, p->irq_base);
-
- p->irq_domain = irq_domain_add_legacy(pdev->dev.of_node,
- pdata->number_of_pins,
- p->irq_base, 0,
- &em_gio_irq_domain_ops, p);
- if (!p->irq_domain) {
- irq_free_descs(p->irq_base, pdata->number_of_pins);
- return -ENXIO;
- }
-
- return 0;
-}
-
-static void em_gio_irq_domain_cleanup(struct em_gio_priv *p)
-{
- struct gpio_em_config *pdata = p->pdev->dev.platform_data;
-
- irq_free_descs(p->irq_base, pdata->number_of_pins);
- /* FIXME: irq domain wants to be freed! */
-}
-
-static int __devinit em_gio_probe(struct platform_device *pdev)
+static int em_gio_probe(struct platform_device *pdev)
{
struct gpio_em_config *pdata = pdev->dev.platform_data;
struct em_gio_priv *p;
@@ -334,8 +299,11 @@
irq_chip->irq_set_type = em_gio_irq_set_type;
irq_chip->flags = IRQCHIP_SKIP_SET_WAKE;
- ret = em_gio_irq_domain_init(p);
- if (ret) {
+ p->irq_domain = irq_domain_add_linear(pdev->dev.of_node,
+ pdata->number_of_pins,
+ &em_gio_irq_domain_ops, p);
+ if (!p->irq_domain) {
+ ret = -ENXIO;
dev_err(&pdev->dev, "cannot initialize irq domain\n");
goto err3;
}
@@ -364,7 +332,7 @@
err5:
free_irq(irq[0]->start, pdev);
err4:
- em_gio_irq_domain_cleanup(p);
+ irq_domain_remove(p->irq_domain);
err3:
iounmap(p->base1);
err2:
@@ -375,7 +343,7 @@
return ret;
}
-static int __devexit em_gio_remove(struct platform_device *pdev)
+static int em_gio_remove(struct platform_device *pdev)
{
struct em_gio_priv *p = platform_get_drvdata(pdev);
struct resource *irq[2];
@@ -390,7 +358,7 @@
free_irq(irq[1]->start, pdev);
free_irq(irq[0]->start, pdev);
- em_gio_irq_domain_cleanup(p);
+ irq_domain_remove(p->irq_domain);
iounmap(p->base1);
iounmap(p->base0);
kfree(p);
@@ -399,7 +367,7 @@
static struct platform_driver em_gio_device_driver = {
.probe = em_gio_probe,
- .remove = __devexit_p(em_gio_remove),
+ .remove = em_gio_remove,
.driver = {
.name = "em_gio",
}
diff --git a/drivers/gpio/gpio-ep93xx.c b/drivers/gpio/gpio-ep93xx.c
index 9fe5b8fe..56b98ee 100644
--- a/drivers/gpio/gpio-ep93xx.c
+++ b/drivers/gpio/gpio-ep93xx.c
@@ -340,7 +340,7 @@
return gpiochip_add(&bgc->gc);
}
-static int __devinit ep93xx_gpio_probe(struct platform_device *pdev)
+static int ep93xx_gpio_probe(struct platform_device *pdev)
{
struct ep93xx_gpio *ep93xx_gpio;
struct resource *res;
diff --git a/drivers/gpio/gpio-generic.c b/drivers/gpio/gpio-generic.c
index 82e2e4f..05fcc0f 100644
--- a/drivers/gpio/gpio-generic.c
+++ b/drivers/gpio/gpio-generic.c
@@ -444,7 +444,7 @@
return ret;
}
-static int __devinit bgpio_pdev_probe(struct platform_device *pdev)
+static int bgpio_pdev_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct resource *r;
@@ -507,7 +507,7 @@
return gpiochip_add(&bgc->gc);
}
-static int __devexit bgpio_pdev_remove(struct platform_device *pdev)
+static int bgpio_pdev_remove(struct platform_device *pdev)
{
struct bgpio_chip *bgc = platform_get_drvdata(pdev);
@@ -527,7 +527,7 @@
},
.id_table = bgpio_id_table,
.probe = bgpio_pdev_probe,
- .remove = __devexit_p(bgpio_pdev_remove),
+ .remove = bgpio_pdev_remove,
};
module_platform_driver(bgpio_driver);
diff --git a/drivers/gpio/gpio-ich.c b/drivers/gpio/gpio-ich.c
index d4d6179..6cc87ac 100644
--- a/drivers/gpio/gpio-ich.c
+++ b/drivers/gpio/gpio-ich.c
@@ -238,7 +238,7 @@
ichx_write_bit(GPIO_LVL, nr, val, 0);
}
-static void __devinit ichx_gpiolib_setup(struct gpio_chip *chip)
+static void ichx_gpiolib_setup(struct gpio_chip *chip)
{
chip->owner = THIS_MODULE;
chip->label = DRV_NAME;
@@ -313,7 +313,7 @@
.ngpio = 76,
};
-static int __devinit ichx_gpio_request_regions(struct resource *res_base,
+static int ichx_gpio_request_regions(struct resource *res_base,
const char *name, u8 use_gpio)
{
int i;
@@ -353,7 +353,7 @@
}
}
-static int __devinit ichx_gpio_probe(struct platform_device *pdev)
+static int ichx_gpio_probe(struct platform_device *pdev)
{
struct resource *res_base, *res_pm;
int err;
@@ -442,7 +442,7 @@
return err;
}
-static int __devexit ichx_gpio_remove(struct platform_device *pdev)
+static int ichx_gpio_remove(struct platform_device *pdev)
{
int err;
@@ -467,7 +467,7 @@
.name = DRV_NAME,
},
.probe = ichx_gpio_probe,
- .remove = __devexit_p(ichx_gpio_remove),
+ .remove = ichx_gpio_remove,
};
module_platform_driver(ichx_gpio_driver);
diff --git a/drivers/gpio/gpio-janz-ttl.c b/drivers/gpio/gpio-janz-ttl.c
index f2f000d..7d0a041 100644
--- a/drivers/gpio/gpio-janz-ttl.c
+++ b/drivers/gpio/gpio-janz-ttl.c
@@ -108,13 +108,13 @@
spin_unlock(&mod->lock);
}
-static void __devinit ttl_write_reg(struct ttl_module *mod, u8 reg, u16 val)
+static void ttl_write_reg(struct ttl_module *mod, u8 reg, u16 val)
{
iowrite16be(reg, &mod->regs->control);
iowrite16be(val, &mod->regs->control);
}
-static void __devinit ttl_setup_device(struct ttl_module *mod)
+static void ttl_setup_device(struct ttl_module *mod)
{
/* reset the device to a known state */
iowrite16be(0x0000, &mod->regs->control);
@@ -140,7 +140,7 @@
ttl_write_reg(mod, MASTER_CONF_CTL, CONF_PAE | CONF_PBE | CONF_PCE);
}
-static int __devinit ttl_probe(struct platform_device *pdev)
+static int ttl_probe(struct platform_device *pdev)
{
struct janz_platform_data *pdata;
struct device *dev = &pdev->dev;
@@ -211,7 +211,7 @@
return ret;
}
-static int __devexit ttl_remove(struct platform_device *pdev)
+static int ttl_remove(struct platform_device *pdev)
{
struct ttl_module *mod = platform_get_drvdata(pdev);
struct device *dev = &pdev->dev;
@@ -234,7 +234,7 @@
.owner = THIS_MODULE,
},
.probe = ttl_probe,
- .remove = __devexit_p(ttl_remove),
+ .remove = ttl_remove,
};
module_platform_driver(ttl_driver);
diff --git a/drivers/gpio/gpio-langwell.c b/drivers/gpio/gpio-langwell.c
index 202a992..e77b2b3 100644
--- a/drivers/gpio/gpio-langwell.c
+++ b/drivers/gpio/gpio-langwell.c
@@ -332,7 +332,7 @@
.runtime_idle = lnw_gpio_runtime_idle,
};
-static int __devinit lnw_gpio_probe(struct pci_dev *pdev,
+static int lnw_gpio_probe(struct pci_dev *pdev,
const struct pci_device_id *id)
{
void *base;
@@ -435,7 +435,7 @@
};
-static int __devinit wp_gpio_probe(struct platform_device *pdev)
+static int wp_gpio_probe(struct platform_device *pdev)
{
struct lnw_gpio *lnw;
struct gpio_chip *gc;
@@ -484,7 +484,7 @@
return retval;
}
-static int __devexit wp_gpio_remove(struct platform_device *pdev)
+static int wp_gpio_remove(struct platform_device *pdev)
{
struct lnw_gpio *lnw = platform_get_drvdata(pdev);
int err;
@@ -499,7 +499,7 @@
static struct platform_driver wp_gpio_driver = {
.probe = wp_gpio_probe,
- .remove = __devexit_p(wp_gpio_remove),
+ .remove = wp_gpio_remove,
.driver = {
.name = "wp_gpio",
.owner = THIS_MODULE,
diff --git a/drivers/gpio/gpio-lpc32xx.c b/drivers/gpio/gpio-lpc32xx.c
index 3644e0d..36d7dee 100644
--- a/drivers/gpio/gpio-lpc32xx.c
+++ b/drivers/gpio/gpio-lpc32xx.c
@@ -542,7 +542,7 @@
return gpiospec->args[1];
}
-static int __devinit lpc32xx_gpio_probe(struct platform_device *pdev)
+static int lpc32xx_gpio_probe(struct platform_device *pdev)
{
int i;
@@ -559,7 +559,7 @@
}
#ifdef CONFIG_OF
-static struct of_device_id lpc32xx_gpio_of_match[] __devinitdata = {
+static struct of_device_id lpc32xx_gpio_of_match[] = {
{ .compatible = "nxp,lpc3220-gpio", },
{ },
};
diff --git a/drivers/gpio/gpio-max7300.c b/drivers/gpio/gpio-max7300.c
index a5ca0ab..4b6b9a0 100644
--- a/drivers/gpio/gpio-max7300.c
+++ b/drivers/gpio/gpio-max7300.c
@@ -31,7 +31,7 @@
return i2c_smbus_read_byte_data(client, reg);
}
-static int __devinit max7300_probe(struct i2c_client *client,
+static int max7300_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct max7301 *ts;
@@ -55,7 +55,7 @@
return ret;
}
-static int __devexit max7300_remove(struct i2c_client *client)
+static int max7300_remove(struct i2c_client *client)
{
return __max730x_remove(&client->dev);
}
@@ -72,7 +72,7 @@
.owner = THIS_MODULE,
},
.probe = max7300_probe,
- .remove = __devexit_p(max7300_remove),
+ .remove = max7300_remove,
.id_table = max7300_id,
};
diff --git a/drivers/gpio/gpio-max7301.c b/drivers/gpio/gpio-max7301.c
index 741acfc..c6c535c 100644
--- a/drivers/gpio/gpio-max7301.c
+++ b/drivers/gpio/gpio-max7301.c
@@ -50,7 +50,7 @@
return word & 0xff;
}
-static int __devinit max7301_probe(struct spi_device *spi)
+static int max7301_probe(struct spi_device *spi)
{
struct max7301 *ts;
int ret;
@@ -75,7 +75,7 @@
return ret;
}
-static int __devexit max7301_remove(struct spi_device *spi)
+static int max7301_remove(struct spi_device *spi)
{
return __max730x_remove(&spi->dev);
}
@@ -92,7 +92,7 @@
.owner = THIS_MODULE,
},
.probe = max7301_probe,
- .remove = __devexit_p(max7301_remove),
+ .remove = max7301_remove,
.id_table = max7301_id,
};
diff --git a/drivers/gpio/gpio-max730x.c b/drivers/gpio/gpio-max730x.c
index 05e2dac..0009234 100644
--- a/drivers/gpio/gpio-max730x.c
+++ b/drivers/gpio/gpio-max730x.c
@@ -160,17 +160,13 @@
mutex_unlock(&ts->lock);
}
-int __devinit __max730x_probe(struct max7301 *ts)
+int __max730x_probe(struct max7301 *ts)
{
struct device *dev = ts->dev;
struct max7301_platform_data *pdata;
int i, ret;
pdata = dev->platform_data;
- if (!pdata || !pdata->base) {
- dev_err(dev, "incorrect or missing platform data\n");
- return -EINVAL;
- }
mutex_init(&ts->lock);
dev_set_drvdata(dev, ts);
@@ -178,7 +174,12 @@
/* Power up the chip and disable IRQ output */
ts->write(dev, 0x04, 0x01);
- ts->input_pullup_active = pdata->input_pullup_active;
+ if (pdata) {
+ ts->input_pullup_active = pdata->input_pullup_active;
+ ts->chip.base = pdata->base;
+ } else {
+ ts->chip.base = -1;
+ }
ts->chip.label = dev->driver->name;
ts->chip.direction_input = max7301_direction_input;
@@ -186,7 +187,6 @@
ts->chip.direction_output = max7301_direction_output;
ts->chip.set = max7301_set;
- ts->chip.base = pdata->base;
ts->chip.ngpio = PIN_NUMBER;
ts->chip.can_sleep = 1;
ts->chip.dev = dev;
@@ -226,7 +226,7 @@
}
EXPORT_SYMBOL_GPL(__max730x_probe);
-int __devexit __max730x_remove(struct device *dev)
+int __max730x_remove(struct device *dev)
{
struct max7301 *ts = dev_get_drvdata(dev);
int ret;
diff --git a/drivers/gpio/gpio-max732x.c b/drivers/gpio/gpio-max732x.c
index 9504120..1e0467c 100644
--- a/drivers/gpio/gpio-max732x.c
+++ b/drivers/gpio/gpio-max732x.c
@@ -526,7 +526,7 @@
}
#endif
-static int __devinit max732x_setup_gpio(struct max732x_chip *chip,
+static int max732x_setup_gpio(struct max732x_chip *chip,
const struct i2c_device_id *id,
unsigned gpio_start)
{
@@ -574,7 +574,7 @@
return port;
}
-static int __devinit max732x_probe(struct i2c_client *client,
+static int max732x_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct max732x_platform_data *pdata;
@@ -651,7 +651,7 @@
return ret;
}
-static int __devexit max732x_remove(struct i2c_client *client)
+static int max732x_remove(struct i2c_client *client)
{
struct max732x_platform_data *pdata = client->dev.platform_data;
struct max732x_chip *chip = i2c_get_clientdata(client);
@@ -690,7 +690,7 @@
.owner = THIS_MODULE,
},
.probe = max732x_probe,
- .remove = __devexit_p(max732x_remove),
+ .remove = max732x_remove,
.id_table = max732x_id,
};
diff --git a/drivers/gpio/gpio-mc33880.c b/drivers/gpio/gpio-mc33880.c
index 2de57ce..6a8fdc2 100644
--- a/drivers/gpio/gpio-mc33880.c
+++ b/drivers/gpio/gpio-mc33880.c
@@ -80,7 +80,7 @@
mutex_unlock(&mc->lock);
}
-static int __devinit mc33880_probe(struct spi_device *spi)
+static int mc33880_probe(struct spi_device *spi)
{
struct mc33880 *mc;
struct mc33880_platform_data *pdata;
@@ -147,7 +147,7 @@
return ret;
}
-static int __devexit mc33880_remove(struct spi_device *spi)
+static int mc33880_remove(struct spi_device *spi)
{
struct mc33880 *mc;
int ret;
@@ -175,7 +175,7 @@
.owner = THIS_MODULE,
},
.probe = mc33880_probe,
- .remove = __devexit_p(mc33880_remove),
+ .remove = mc33880_remove,
};
static int __init mc33880_init(void)
diff --git a/drivers/gpio/gpio-mcp23s08.c b/drivers/gpio/gpio-mcp23s08.c
index ce1c847..3cea0ea 100644
--- a/drivers/gpio/gpio-mcp23s08.c
+++ b/drivers/gpio/gpio-mcp23s08.c
@@ -475,7 +475,7 @@
#if IS_ENABLED(CONFIG_I2C)
-static int __devinit mcp230xx_probe(struct i2c_client *client,
+static int mcp230xx_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct mcp23s08_platform_data *pdata;
@@ -508,7 +508,7 @@
return status;
}
-static int __devexit mcp230xx_remove(struct i2c_client *client)
+static int mcp230xx_remove(struct i2c_client *client)
{
struct mcp23s08 *mcp = i2c_get_clientdata(client);
int status;
@@ -533,7 +533,7 @@
.owner = THIS_MODULE,
},
.probe = mcp230xx_probe,
- .remove = __devexit_p(mcp230xx_remove),
+ .remove = mcp230xx_remove,
.id_table = mcp230xx_id,
};
diff --git a/drivers/gpio/gpio-ml-ioh.c b/drivers/gpio/gpio-ml-ioh.c
index 6a29ee1..b733665 100644
--- a/drivers/gpio/gpio-ml-ioh.c
+++ b/drivers/gpio/gpio-ml-ioh.c
@@ -385,7 +385,7 @@
return ret;
}
-static __devinit void ioh_gpio_alloc_generic_chip(struct ioh_gpio *chip,
+static void ioh_gpio_alloc_generic_chip(struct ioh_gpio *chip,
unsigned int irq_start, unsigned int num)
{
struct irq_chip_generic *gc;
@@ -406,7 +406,7 @@
IRQ_NOREQUEST | IRQ_NOPROBE, 0);
}
-static int __devinit ioh_gpio_probe(struct pci_dev *pdev,
+static int ioh_gpio_probe(struct pci_dev *pdev,
const struct pci_device_id *id)
{
int ret;
@@ -517,7 +517,7 @@
return ret;
}
-static void __devexit ioh_gpio_remove(struct pci_dev *pdev)
+static void ioh_gpio_remove(struct pci_dev *pdev)
{
int err;
int i;
@@ -606,7 +606,7 @@
.name = "ml_ioh_gpio",
.id_table = ioh_gpio_pcidev_id,
.probe = ioh_gpio_probe,
- .remove = __devexit_p(ioh_gpio_remove),
+ .remove = ioh_gpio_remove,
.suspend = ioh_gpio_suspend,
.resume = ioh_gpio_resume
};
diff --git a/drivers/gpio/gpio-mpc5200.c b/drivers/gpio/gpio-mpc5200.c
index 2c7cef3..42647f2 100644
--- a/drivers/gpio/gpio-mpc5200.c
+++ b/drivers/gpio/gpio-mpc5200.c
@@ -148,7 +148,7 @@
return 0;
}
-static int __devinit mpc52xx_wkup_gpiochip_probe(struct platform_device *ofdev)
+static int mpc52xx_wkup_gpiochip_probe(struct platform_device *ofdev)
{
struct mpc52xx_gpiochip *chip;
struct mpc52xx_gpio_wkup __iomem *regs;
@@ -308,7 +308,7 @@
return 0;
}
-static int __devinit mpc52xx_simple_gpiochip_probe(struct platform_device *ofdev)
+static int mpc52xx_simple_gpiochip_probe(struct platform_device *ofdev)
{
struct mpc52xx_gpiochip *chip;
struct gpio_chip *gc;
diff --git a/drivers/gpio/gpio-msic.c b/drivers/gpio/gpio-msic.c
index b389862..27ea7b9 100644
--- a/drivers/gpio/gpio-msic.c
+++ b/drivers/gpio/gpio-msic.c
@@ -256,7 +256,7 @@
chip->irq_eoi(data);
}
-static int __devinit platform_msic_gpio_probe(struct platform_device *pdev)
+static int platform_msic_gpio_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct intel_msic_gpio_pdata *pdata = dev->platform_data;
diff --git a/drivers/gpio/gpio-msm-v2.c b/drivers/gpio/gpio-msm-v2.c
index 38305be..55a7e77 100644
--- a/drivers/gpio/gpio-msm-v2.c
+++ b/drivers/gpio/gpio-msm-v2.c
@@ -352,7 +352,7 @@
.irq_set_wake = msm_gpio_irq_set_wake,
};
-static int __devinit msm_gpio_probe(struct platform_device *dev)
+static int msm_gpio_probe(struct platform_device *dev)
{
int i, irq, ret;
@@ -376,7 +376,7 @@
return 0;
}
-static int __devexit msm_gpio_remove(struct platform_device *dev)
+static int msm_gpio_remove(struct platform_device *dev)
{
int ret = gpiochip_remove(&msm_gpio.gpio_chip);
@@ -390,7 +390,7 @@
static struct platform_driver msm_gpio_driver = {
.probe = msm_gpio_probe,
- .remove = __devexit_p(msm_gpio_remove),
+ .remove = msm_gpio_remove,
.driver = {
.name = "msmgpio",
.owner = THIS_MODULE,
diff --git a/drivers/gpio/gpio-mvebu.c b/drivers/gpio/gpio-mvebu.c
index be65c04..d767b53 100644
--- a/drivers/gpio/gpio-mvebu.c
+++ b/drivers/gpio/gpio-mvebu.c
@@ -168,12 +168,12 @@
* Functions implementing the gpio_chip methods
*/
-int mvebu_gpio_request(struct gpio_chip *chip, unsigned pin)
+static int mvebu_gpio_request(struct gpio_chip *chip, unsigned pin)
{
return pinctrl_request_gpio(chip->base + pin);
}
-void mvebu_gpio_free(struct gpio_chip *chip, unsigned pin)
+static void mvebu_gpio_free(struct gpio_chip *chip, unsigned pin)
{
pinctrl_free_gpio(chip->base + pin);
}
@@ -482,7 +482,7 @@
};
MODULE_DEVICE_TABLE(platform, mvebu_gpio_ids);
-static struct of_device_id mvebu_gpio_of_match[] __devinitdata = {
+static struct of_device_id mvebu_gpio_of_match[] = {
{
.compatible = "marvell,orion-gpio",
.data = (void*) MVEBU_GPIO_SOC_VARIANT_ORION,
@@ -501,7 +501,7 @@
};
MODULE_DEVICE_TABLE(of, mvebu_gpio_of_match);
-static int __devinit mvebu_gpio_probe(struct platform_device *pdev)
+static int mvebu_gpio_probe(struct platform_device *pdev)
{
struct mvebu_gpio_chip *mvchip;
const struct of_device_id *match;
@@ -546,6 +546,7 @@
mvchip->chip.label = dev_name(&pdev->dev);
mvchip->chip.dev = &pdev->dev;
mvchip->chip.request = mvebu_gpio_request;
+ mvchip->chip.free = mvebu_gpio_free;
mvchip->chip.direction_input = mvebu_gpio_direction_input;
mvchip->chip.get = mvebu_gpio_get;
mvchip->chip.direction_output = mvebu_gpio_direction_output;
@@ -673,8 +674,8 @@
IRQ_NOREQUEST, IRQ_LEVEL | IRQ_NOPROBE);
/* Setup irq domain on top of the generic chip. */
- mvchip->domain = irq_domain_add_legacy(np, mvchip->chip.ngpio,
- mvchip->irqbase, 0,
+ mvchip->domain = irq_domain_add_simple(np, mvchip->chip.ngpio,
+ mvchip->irqbase,
&irq_domain_simple_ops,
mvchip);
if (!mvchip->domain) {
diff --git a/drivers/gpio/gpio-mxc.c b/drivers/gpio/gpio-mxc.c
index 80f44bb..7877335 100644
--- a/drivers/gpio/gpio-mxc.c
+++ b/drivers/gpio/gpio-mxc.c
@@ -356,7 +356,7 @@
IRQ_NOREQUEST, 0);
}
-static void __devinit mxc_gpio_get_hw(struct platform_device *pdev)
+static void mxc_gpio_get_hw(struct platform_device *pdev)
{
const struct of_device_id *of_id =
of_match_device(mxc_gpio_dt_ids, &pdev->dev);
@@ -395,7 +395,7 @@
return irq_find_mapping(port->domain, offset);
}
-static int __devinit mxc_gpio_probe(struct platform_device *pdev)
+static int mxc_gpio_probe(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
struct mxc_gpio_port *port;
diff --git a/drivers/gpio/gpio-mxs.c b/drivers/gpio/gpio-mxs.c
index 796fb13..fa2a63c 100644
--- a/drivers/gpio/gpio-mxs.c
+++ b/drivers/gpio/gpio-mxs.c
@@ -214,7 +214,7 @@
};
MODULE_DEVICE_TABLE(of, mxs_gpio_dt_ids);
-static int __devinit mxs_gpio_probe(struct platform_device *pdev)
+static int mxs_gpio_probe(struct platform_device *pdev)
{
const struct of_device_id *of_id =
of_match_device(mxs_gpio_dt_ids, &pdev->dev);
diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index d335af1..f1fbedb2 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -1012,7 +1012,7 @@
dev_err(bank->dev, "Could not get gpio dbck\n");
}
-static __devinit void
+static void
omap_mpuio_alloc_gc(struct gpio_bank *bank, unsigned int irq_start,
unsigned int num)
{
@@ -1041,7 +1041,7 @@
IRQ_NOREQUEST | IRQ_NOPROBE, 0);
}
-static void __devinit omap_gpio_chip_init(struct gpio_bank *bank)
+static void omap_gpio_chip_init(struct gpio_bank *bank)
{
int j;
static int gpio;
@@ -1089,7 +1089,7 @@
static const struct of_device_id omap_gpio_match[];
-static int __devinit omap_gpio_probe(struct platform_device *pdev)
+static int omap_gpio_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct device_node *node = dev->of_node;
@@ -1105,7 +1105,7 @@
if (!pdata)
return -EINVAL;
- bank = devm_kzalloc(&pdev->dev, sizeof(struct gpio_bank), GFP_KERNEL);
+ bank = devm_kzalloc(dev, sizeof(struct gpio_bank), GFP_KERNEL);
if (!bank) {
dev_err(dev, "Memory alloc failed\n");
return -ENOMEM;
diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c
index 9c693ae..cc102d2 100644
--- a/drivers/gpio/gpio-pca953x.c
+++ b/drivers/gpio/gpio-pca953x.c
@@ -16,6 +16,7 @@
#include <linux/gpio.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
+#include <linux/irqdomain.h>
#include <linux/i2c.h>
#include <linux/i2c/pca953x.h>
#include <linux/slab.h>
@@ -83,6 +84,7 @@
u32 irq_trig_raise;
u32 irq_trig_fall;
int irq_base;
+ struct irq_domain *domain;
#endif
struct i2c_client *client;
@@ -333,14 +335,14 @@
{
struct pca953x_chip *chip = irq_data_get_irq_chip_data(d);
- chip->irq_mask &= ~(1 << (d->irq - chip->irq_base));
+ chip->irq_mask &= ~(1 << d->hwirq);
}
static void pca953x_irq_unmask(struct irq_data *d)
{
struct pca953x_chip *chip = irq_data_get_irq_chip_data(d);
- chip->irq_mask |= 1 << (d->irq - chip->irq_base);
+ chip->irq_mask |= 1 << d->hwirq;
}
static void pca953x_irq_bus_lock(struct irq_data *d)
@@ -372,8 +374,7 @@
static int pca953x_irq_set_type(struct irq_data *d, unsigned int type)
{
struct pca953x_chip *chip = irq_data_get_irq_chip_data(d);
- u32 level = d->irq - chip->irq_base;
- u32 mask = 1 << level;
+ u32 mask = 1 << d->hwirq;
if (!(type & IRQ_TYPE_EDGE_BOTH)) {
dev_err(&chip->client->dev, "irq %d: unsupported type %d\n",
@@ -454,7 +455,7 @@
do {
level = __ffs(pending);
- handle_nested_irq(level + chip->irq_base);
+ handle_nested_irq(irq_find_mapping(chip->domain, level));
pending &= ~(1 << level);
} while (pending);
@@ -499,6 +500,17 @@
if (chip->irq_base < 0)
goto out_failed;
+ chip->domain = irq_domain_add_legacy(client->dev.of_node,
+ chip->gpio_chip.ngpio,
+ chip->irq_base,
+ 0,
+ &irq_domain_simple_ops,
+ NULL);
+ if (!chip->domain) {
+ ret = -ENODEV;
+ goto out_irqdesc_free;
+ }
+
for (lvl = 0; lvl < chip->gpio_chip.ngpio; lvl++) {
int irq = lvl + chip->irq_base;
@@ -521,7 +533,7 @@
if (ret) {
dev_err(&client->dev, "failed to request irq %d\n",
client->irq);
- goto out_failed;
+ goto out_irqdesc_free;
}
chip->gpio_chip.to_irq = pca953x_gpio_to_irq;
@@ -529,6 +541,8 @@
return 0;
+out_irqdesc_free:
+ irq_free_descs(chip->irq_base, chip->gpio_chip.ngpio);
out_failed:
chip->irq_base = -1;
return ret;
@@ -602,7 +616,7 @@
}
#endif
-static int __devinit device_pca953x_init(struct pca953x_chip *chip, u32 invert)
+static int device_pca953x_init(struct pca953x_chip *chip, u32 invert)
{
int ret;
@@ -621,7 +635,7 @@
return ret;
}
-static int __devinit device_pca957x_init(struct pca953x_chip *chip, u32 invert)
+static int device_pca957x_init(struct pca953x_chip *chip, u32 invert)
{
int ret;
u32 val = 0;
@@ -652,7 +666,7 @@
return ret;
}
-static int __devinit pca953x_probe(struct i2c_client *client,
+static int pca953x_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct pca953x_platform_data *pdata;
@@ -751,9 +765,38 @@
return 0;
}
+static const struct of_device_id pca953x_dt_ids[] = {
+ { .compatible = "nxp,pca9534", },
+ { .compatible = "nxp,pca9535", },
+ { .compatible = "nxp,pca9536", },
+ { .compatible = "nxp,pca9537", },
+ { .compatible = "nxp,pca9538", },
+ { .compatible = "nxp,pca9539", },
+ { .compatible = "nxp,pca9554", },
+ { .compatible = "nxp,pca9555", },
+ { .compatible = "nxp,pca9556", },
+ { .compatible = "nxp,pca9557", },
+ { .compatible = "nxp,pca9574", },
+ { .compatible = "nxp,pca9575", },
+
+ { .compatible = "maxim,max7310", },
+ { .compatible = "maxim,max7312", },
+ { .compatible = "maxim,max7313", },
+ { .compatible = "maxim,max7315", },
+
+ { .compatible = "ti,pca6107", },
+ { .compatible = "ti,tca6408", },
+ { .compatible = "ti,tca6416", },
+ { .compatible = "ti,tca6424", },
+ { }
+};
+
+MODULE_DEVICE_TABLE(of, pca953x_dt_ids);
+
static struct i2c_driver pca953x_driver = {
.driver = {
.name = "pca953x",
+ .of_match_table = pca953x_dt_ids,
},
.probe = pca953x_probe,
.remove = pca953x_remove,
diff --git a/drivers/gpio/gpio-pcf857x.c b/drivers/gpio/gpio-pcf857x.c
index 16af35c..a19b745 100644
--- a/drivers/gpio/gpio-pcf857x.c
+++ b/drivers/gpio/gpio-pcf857x.c
@@ -223,11 +223,11 @@
static int pcf857x_irq_domain_init(struct pcf857x *gpio,
struct pcf857x_platform_data *pdata,
- struct device *dev)
+ struct i2c_client *client)
{
int status;
- gpio->irq_domain = irq_domain_add_linear(dev->of_node,
+ gpio->irq_domain = irq_domain_add_linear(client->dev.of_node,
gpio->chip.ngpio,
&pcf857x_irq_domain_ops,
NULL);
@@ -235,15 +235,15 @@
goto fail;
/* enable real irq */
- status = request_irq(pdata->irq, pcf857x_irq_demux, 0,
- dev_name(dev), gpio);
+ status = request_irq(client->irq, pcf857x_irq_demux, 0,
+ dev_name(&client->dev), gpio);
if (status)
goto fail;
/* enable gpio_to_irq() */
INIT_WORK(&gpio->work, pcf857x_irq_demux_work);
gpio->chip.to_irq = pcf857x_to_irq;
- gpio->irq = pdata->irq;
+ gpio->irq = client->irq;
return 0;
@@ -285,8 +285,8 @@
gpio->chip.ngpio = id->driver_data;
/* enable gpio_to_irq() if platform has settings */
- if (pdata && pdata->irq) {
- status = pcf857x_irq_domain_init(gpio, pdata, &client->dev);
+ if (pdata && client->irq) {
+ status = pcf857x_irq_domain_init(gpio, pdata, client);
if (status < 0) {
dev_err(&client->dev, "irq_domain init failed\n");
goto fail;
@@ -368,15 +368,6 @@
if (status < 0)
goto fail;
- /* NOTE: these chips can issue "some pin-changed" IRQs, which we
- * don't yet even try to use. Among other issues, the relevant
- * genirq state isn't available to modular drivers; and most irq
- * methods can't be called from sleeping contexts.
- */
-
- dev_info(&client->dev, "%s\n",
- client->irq ? " (irq ignored)" : "");
-
/* Let platform code set up the GPIOs and their users.
* Now is the first time anyone could use them.
*/
@@ -388,13 +379,15 @@
dev_warn(&client->dev, "setup --> %d\n", status);
}
+ dev_info(&client->dev, "probed\n");
+
return 0;
fail:
dev_dbg(&client->dev, "probe error %d for '%s'\n",
status, client->name);
- if (pdata && pdata->irq)
+ if (pdata && client->irq)
pcf857x_irq_domain_cleanup(gpio);
kfree(gpio);
@@ -418,7 +411,7 @@
}
}
- if (pdata && pdata->irq)
+ if (pdata && client->irq)
pcf857x_irq_domain_cleanup(gpio);
status = gpiochip_remove(&gpio->chip);
diff --git a/drivers/gpio/gpio-pch.c b/drivers/gpio/gpio-pch.c
index 4ad0c4f..cdf5996 100644
--- a/drivers/gpio/gpio-pch.c
+++ b/drivers/gpio/gpio-pch.c
@@ -215,6 +215,7 @@
struct gpio_chip *gpio = &chip->gpio;
gpio->label = dev_name(chip->dev);
+ gpio->dev = chip->dev;
gpio->owner = THIS_MODULE;
gpio->direction_input = pch_gpio_direction_input;
gpio->get = pch_gpio_get;
@@ -325,7 +326,7 @@
return ret;
}
-static __devinit void pch_gpio_alloc_generic_chip(struct pch_gpio *chip,
+static void pch_gpio_alloc_generic_chip(struct pch_gpio *chip,
unsigned int irq_start, unsigned int num)
{
struct irq_chip_generic *gc;
@@ -345,7 +346,7 @@
IRQ_NOREQUEST | IRQ_NOPROBE, 0);
}
-static int __devinit pch_gpio_probe(struct pci_dev *pdev,
+static int pch_gpio_probe(struct pci_dev *pdev,
const struct pci_device_id *id)
{
s32 ret;
@@ -442,7 +443,7 @@
return ret;
}
-static void __devexit pch_gpio_remove(struct pci_dev *pdev)
+static void pch_gpio_remove(struct pci_dev *pdev)
{
int err;
struct pch_gpio *chip = pci_get_drvdata(pdev);
@@ -531,7 +532,7 @@
.name = "pch_gpio",
.id_table = pch_gpio_pcidev_id,
.probe = pch_gpio_probe,
- .remove = __devexit_p(pch_gpio_remove),
+ .remove = pch_gpio_remove,
.suspend = pch_gpio_suspend,
.resume = pch_gpio_resume
};
diff --git a/drivers/gpio/gpio-pl061.c b/drivers/gpio/gpio-pl061.c
index b4b5da4..c1720de 100644
--- a/drivers/gpio/gpio-pl061.c
+++ b/drivers/gpio/gpio-pl061.c
@@ -48,12 +48,7 @@
#endif
struct pl061_gpio {
- /* Each of the two spinlocks protects a different set of hardware
- * regiters and data structurs. This decouples the code of the IRQ from
- * the GPIO code. This also makes the case of a GPIO routine call from
- * the IRQ code simpler.
- */
- spinlock_t lock; /* GPIO registers */
+ spinlock_t lock;
void __iomem *base;
int irq_base;
@@ -216,39 +211,34 @@
IRQ_GC_INIT_NESTED_LOCK, IRQ_NOREQUEST, 0);
}
-static int pl061_probe(struct amba_device *dev, const struct amba_id *id)
+static int pl061_probe(struct amba_device *adev, const struct amba_id *id)
{
- struct pl061_platform_data *pdata;
+ struct device *dev = &adev->dev;
+ struct pl061_platform_data *pdata = dev->platform_data;
struct pl061_gpio *chip;
int ret, irq, i;
- chip = kzalloc(sizeof(*chip), GFP_KERNEL);
+ chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL);
if (chip == NULL)
return -ENOMEM;
- pdata = dev->dev.platform_data;
if (pdata) {
chip->gc.base = pdata->gpio_base;
chip->irq_base = pdata->irq_base;
- } else if (dev->dev.of_node) {
+ } else if (adev->dev.of_node) {
chip->gc.base = -1;
chip->irq_base = 0;
- } else {
- ret = -ENODEV;
- goto free_mem;
- }
+ } else
+ return -ENODEV;
- if (!request_mem_region(dev->res.start,
- resource_size(&dev->res), "pl061")) {
- ret = -EBUSY;
- goto free_mem;
- }
+ if (!devm_request_mem_region(dev, adev->res.start,
+ resource_size(&adev->res), "pl061"))
+ return -EBUSY;
- chip->base = ioremap(dev->res.start, resource_size(&dev->res));
- if (chip->base == NULL) {
- ret = -ENOMEM;
- goto release_region;
- }
+ chip->base = devm_ioremap(dev, adev->res.start,
+ resource_size(&adev->res));
+ if (chip->base == NULL)
+ return -ENOMEM;
spin_lock_init(&chip->lock);
@@ -258,13 +248,13 @@
chip->gc.set = pl061_set_value;
chip->gc.to_irq = pl061_to_irq;
chip->gc.ngpio = PL061_GPIO_NR;
- chip->gc.label = dev_name(&dev->dev);
- chip->gc.dev = &dev->dev;
+ chip->gc.label = dev_name(dev);
+ chip->gc.dev = dev;
chip->gc.owner = THIS_MODULE;
ret = gpiochip_add(&chip->gc);
if (ret)
- goto iounmap;
+ return ret;
/*
* irq_chip support
@@ -276,11 +266,10 @@
pl061_init_gc(chip, chip->irq_base);
writeb(0, chip->base + GPIOIE); /* disable irqs */
- irq = dev->irq[0];
- if (irq < 0) {
- ret = -ENODEV;
- goto iounmap;
- }
+ irq = adev->irq[0];
+ if (irq < 0)
+ return -ENODEV;
+
irq_set_chained_handler(irq, pl061_irq_handler);
irq_set_handler_data(irq, chip);
@@ -294,18 +283,9 @@
}
}
- amba_set_drvdata(dev, chip);
+ amba_set_drvdata(adev, chip);
return 0;
-
-iounmap:
- iounmap(chip->base);
-release_region:
- release_mem_region(dev->res.start, resource_size(&dev->res));
-free_mem:
- kfree(chip);
-
- return ret;
}
#ifdef CONFIG_PM
diff --git a/drivers/gpio/gpio-pxa.c b/drivers/gpio/gpio-pxa.c
index 98d52cb..3e35243 100644
--- a/drivers/gpio/gpio-pxa.c
+++ b/drivers/gpio/gpio-pxa.c
@@ -250,7 +250,7 @@
}
#endif
-static int __devinit pxa_init_gpio_chip(int gpio_end,
+static int pxa_init_gpio_chip(int gpio_end,
int (*set_wake)(unsigned int, unsigned int))
{
int i, gpio, nbanks = gpio_to_bank(gpio_end) + 1;
@@ -490,7 +490,7 @@
.xlate = irq_domain_xlate_twocell,
};
-static int __devinit pxa_gpio_probe_dt(struct platform_device *pdev)
+static int pxa_gpio_probe_dt(struct platform_device *pdev)
{
int ret, nr_banks, nr_gpios;
struct device_node *prev, *next, *np = pdev->dev.of_node;
@@ -537,7 +537,7 @@
#define pxa_gpio_probe_dt(pdev) (-1)
#endif
-static int __devinit pxa_gpio_probe(struct platform_device *pdev)
+static int pxa_gpio_probe(struct platform_device *pdev)
{
struct pxa_gpio_chip *c;
struct resource *res;
diff --git a/drivers/gpio/gpio-rc5t583.c b/drivers/gpio/gpio-rc5t583.c
index 08428bf..e63d6a3 100644
--- a/drivers/gpio/gpio-rc5t583.c
+++ b/drivers/gpio/gpio-rc5t583.c
@@ -111,7 +111,7 @@
rc5t583_set_bits(parent, RC5T583_GPIO_PGSEL, BIT(offset));
}
-static int __devinit rc5t583_gpio_probe(struct platform_device *pdev)
+static int rc5t583_gpio_probe(struct platform_device *pdev)
{
struct rc5t583 *rc5t583 = dev_get_drvdata(pdev->dev.parent);
struct rc5t583_platform_data *pdata = dev_get_platdata(rc5t583->dev);
@@ -146,7 +146,7 @@
return gpiochip_add(&rc5t583_gpio->gpio_chip);
}
-static int __devexit rc5t583_gpio_remove(struct platform_device *pdev)
+static int rc5t583_gpio_remove(struct platform_device *pdev)
{
struct rc5t583_gpio *rc5t583_gpio = platform_get_drvdata(pdev);
@@ -159,7 +159,7 @@
.owner = THIS_MODULE,
},
.probe = rc5t583_gpio_probe,
- .remove = __devexit_p(rc5t583_gpio_remove),
+ .remove = rc5t583_gpio_remove,
};
static int __init rc5t583_gpio_init(void)
diff --git a/drivers/gpio/gpio-rdc321x.c b/drivers/gpio/gpio-rdc321x.c
index b62d443..1bf55f6 100644
--- a/drivers/gpio/gpio-rdc321x.c
+++ b/drivers/gpio/gpio-rdc321x.c
@@ -128,7 +128,7 @@
/*
* Cache the initial value of both GPIO data registers
*/
-static int __devinit rdc321x_gpio_probe(struct platform_device *pdev)
+static int rdc321x_gpio_probe(struct platform_device *pdev)
{
int err;
struct resource *r;
@@ -206,7 +206,7 @@
return err;
}
-static int __devexit rdc321x_gpio_remove(struct platform_device *pdev)
+static int rdc321x_gpio_remove(struct platform_device *pdev)
{
int ret;
struct rdc321x_gpio *rdc321x_gpio_dev = platform_get_drvdata(pdev);
@@ -225,7 +225,7 @@
.driver.name = "rdc321x-gpio",
.driver.owner = THIS_MODULE,
.probe = rdc321x_gpio_probe,
- .remove = __devexit_p(rdc321x_gpio_remove),
+ .remove = rdc321x_gpio_remove,
};
module_platform_driver(rdc321x_gpio_driver);
diff --git a/drivers/gpio/gpio-sch.c b/drivers/gpio/gpio-sch.c
index 8707d45..edae963 100644
--- a/drivers/gpio/gpio-sch.c
+++ b/drivers/gpio/gpio-sch.c
@@ -185,7 +185,7 @@
.set = sch_gpio_resume_set,
};
-static int __devinit sch_gpio_probe(struct platform_device *pdev)
+static int sch_gpio_probe(struct platform_device *pdev)
{
struct resource *res;
int err, id;
@@ -271,7 +271,7 @@
return err;
}
-static int __devexit sch_gpio_remove(struct platform_device *pdev)
+static int sch_gpio_remove(struct platform_device *pdev)
{
struct resource *res;
if (gpio_ba) {
@@ -303,7 +303,7 @@
.owner = THIS_MODULE,
},
.probe = sch_gpio_probe,
- .remove = __devexit_p(sch_gpio_remove),
+ .remove = sch_gpio_remove,
};
module_platform_driver(sch_gpio_driver);
diff --git a/drivers/gpio/gpio-sodaville.c b/drivers/gpio/gpio-sodaville.c
index e25f731..88f374a 100644
--- a/drivers/gpio/gpio-sodaville.c
+++ b/drivers/gpio/gpio-sodaville.c
@@ -129,7 +129,7 @@
.xlate = sdv_xlate,
};
-static __devinit int sdv_register_irqsupport(struct sdv_gpio_chip_data *sd,
+static int sdv_register_irqsupport(struct sdv_gpio_chip_data *sd,
struct pci_dev *pdev)
{
struct irq_chip_type *ct;
@@ -186,7 +186,7 @@
return ret;
}
-static int __devinit sdv_gpio_probe(struct pci_dev *pdev,
+static int sdv_gpio_probe(struct pci_dev *pdev,
const struct pci_device_id *pci_id)
{
struct sdv_gpio_chip_data *sd;
diff --git a/drivers/gpio/gpio-spear-spics.c b/drivers/gpio/gpio-spear-spics.c
new file mode 100644
index 0000000..5f45fc4
--- /dev/null
+++ b/drivers/gpio/gpio-spear-spics.c
@@ -0,0 +1,217 @@
+/*
+ * SPEAr platform SPI chipselect abstraction over gpiolib
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Shiraz Hashim <shiraz.hashim@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+
+/* maximum chipselects */
+#define NUM_OF_GPIO 4
+
+/*
+ * Provision is available on some SPEAr SoCs to control ARM PL022 spi cs
+ * through system registers. This register lies outside spi (pl022)
+ * address space into system registers.
+ *
+ * It provides control for spi chip select lines so that any chipselect
+ * (out of 4 possible chipselects in pl022) can be made low to select
+ * the particular slave.
+ */
+
+/**
+ * struct spear_spics - represents spi chip select control
+ * @base: base address
+ * @perip_cfg: configuration register
+ * @sw_enable_bit: bit to enable s/w control over chipselects
+ * @cs_value_bit: bit to program high or low chipselect
+ * @cs_enable_mask: mask to select bits required to select chipselect
+ * @cs_enable_shift: bit pos of cs_enable_mask
+ * @use_count: use count of a spi controller cs lines
+ * @last_off: stores last offset caller of set_value()
+ * @chip: gpio_chip abstraction
+ */
+struct spear_spics {
+ void __iomem *base;
+ u32 perip_cfg;
+ u32 sw_enable_bit;
+ u32 cs_value_bit;
+ u32 cs_enable_mask;
+ u32 cs_enable_shift;
+ unsigned long use_count;
+ int last_off;
+ struct gpio_chip chip;
+};
+
+/* gpio framework specific routines */
+static int spics_get_value(struct gpio_chip *chip, unsigned offset)
+{
+ return -ENXIO;
+}
+
+static void spics_set_value(struct gpio_chip *chip, unsigned offset, int value)
+{
+ struct spear_spics *spics = container_of(chip, struct spear_spics,
+ chip);
+ u32 tmp;
+
+ /* select chip select from register */
+ tmp = readl_relaxed(spics->base + spics->perip_cfg);
+ if (spics->last_off != offset) {
+ spics->last_off = offset;
+ tmp &= ~(spics->cs_enable_mask << spics->cs_enable_shift);
+ tmp |= offset << spics->cs_enable_shift;
+ }
+
+ /* toggle chip select line */
+ tmp &= ~(0x1 << spics->cs_value_bit);
+ tmp |= value << spics->cs_value_bit;
+ writel_relaxed(tmp, spics->base + spics->perip_cfg);
+}
+
+static int spics_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+ return -ENXIO;
+}
+
+static int spics_direction_output(struct gpio_chip *chip, unsigned offset,
+ int value)
+{
+ spics_set_value(chip, offset, value);
+ return 0;
+}
+
+static int spics_request(struct gpio_chip *chip, unsigned offset)
+{
+ struct spear_spics *spics = container_of(chip, struct spear_spics,
+ chip);
+ u32 tmp;
+
+ if (!spics->use_count++) {
+ tmp = readl_relaxed(spics->base + spics->perip_cfg);
+ tmp |= 0x1 << spics->sw_enable_bit;
+ tmp |= 0x1 << spics->cs_value_bit;
+ writel_relaxed(tmp, spics->base + spics->perip_cfg);
+ }
+
+ return 0;
+}
+
+static void spics_free(struct gpio_chip *chip, unsigned offset)
+{
+ struct spear_spics *spics = container_of(chip, struct spear_spics,
+ chip);
+ u32 tmp;
+
+ if (!--spics->use_count) {
+ tmp = readl_relaxed(spics->base + spics->perip_cfg);
+ tmp &= ~(0x1 << spics->sw_enable_bit);
+ writel_relaxed(tmp, spics->base + spics->perip_cfg);
+ }
+}
+
+static int spics_gpio_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct spear_spics *spics;
+ struct resource *res;
+ int ret;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "invalid IORESOURCE_MEM\n");
+ return -EBUSY;
+ }
+
+ spics = devm_kzalloc(&pdev->dev, sizeof(*spics), GFP_KERNEL);
+ if (!spics) {
+ dev_err(&pdev->dev, "memory allocation fail\n");
+ return -ENOMEM;
+ }
+
+ spics->base = devm_request_and_ioremap(&pdev->dev, res);
+ if (!spics->base) {
+ dev_err(&pdev->dev, "request and ioremap fail\n");
+ return -ENOMEM;
+ }
+
+ if (of_property_read_u32(np, "st-spics,peripcfg-reg",
+ &spics->perip_cfg))
+ goto err_dt_data;
+ if (of_property_read_u32(np, "st-spics,sw-enable-bit",
+ &spics->sw_enable_bit))
+ goto err_dt_data;
+ if (of_property_read_u32(np, "st-spics,cs-value-bit",
+ &spics->cs_value_bit))
+ goto err_dt_data;
+ if (of_property_read_u32(np, "st-spics,cs-enable-mask",
+ &spics->cs_enable_mask))
+ goto err_dt_data;
+ if (of_property_read_u32(np, "st-spics,cs-enable-shift",
+ &spics->cs_enable_shift))
+ goto err_dt_data;
+
+ platform_set_drvdata(pdev, spics);
+
+ spics->chip.ngpio = NUM_OF_GPIO;
+ spics->chip.base = -1;
+ spics->chip.request = spics_request;
+ spics->chip.free = spics_free;
+ spics->chip.direction_input = spics_direction_input;
+ spics->chip.direction_output = spics_direction_output;
+ spics->chip.get = spics_get_value;
+ spics->chip.set = spics_set_value;
+ spics->chip.label = dev_name(&pdev->dev);
+ spics->chip.dev = &pdev->dev;
+ spics->chip.owner = THIS_MODULE;
+ spics->last_off = -1;
+
+ ret = gpiochip_add(&spics->chip);
+ if (ret) {
+ dev_err(&pdev->dev, "unable to add gpio chip\n");
+ return ret;
+ }
+
+ dev_info(&pdev->dev, "spear spics registered\n");
+ return 0;
+
+err_dt_data:
+ dev_err(&pdev->dev, "DT probe failed\n");
+ return -EINVAL;
+}
+
+static const struct of_device_id spics_gpio_of_match[] = {
+ { .compatible = "st,spear-spics-gpio" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, spics_gpio_of_match);
+
+static struct platform_driver spics_gpio_driver = {
+ .probe = spics_gpio_probe,
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "spear-spics-gpio",
+ .of_match_table = spics_gpio_of_match,
+ },
+};
+
+static int __init spics_gpio_init(void)
+{
+ return platform_driver_register(&spics_gpio_driver);
+}
+subsys_initcall(spics_gpio_init);
+
+MODULE_AUTHOR("Shiraz Hashim <shiraz.hashim@st.com>");
+MODULE_DESCRIPTION("ST Microlectronics SPEAr SPI Chip Select Abstraction");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpio/gpio-sta2x11.c b/drivers/gpio/gpio-sta2x11.c
index 6064fb3..5585425 100644
--- a/drivers/gpio/gpio-sta2x11.c
+++ b/drivers/gpio/gpio-sta2x11.c
@@ -320,7 +320,7 @@
return ret;
}
-static __devinit void gsta_alloc_irq_chip(struct gsta_gpio *chip)
+static void gsta_alloc_irq_chip(struct gsta_gpio *chip)
{
struct irq_chip_generic *gc;
struct irq_chip_type *ct;
@@ -353,7 +353,7 @@
}
/* The platform device used here is instantiated by the MFD device */
-static int __devinit gsta_probe(struct platform_device *dev)
+static int gsta_probe(struct platform_device *dev)
{
int i, err;
struct pci_dev *pdev;
diff --git a/drivers/gpio/gpio-stmpe.c b/drivers/gpio/gpio-stmpe.c
index dce3472..770476a 100644
--- a/drivers/gpio/gpio-stmpe.c
+++ b/drivers/gpio/gpio-stmpe.c
@@ -11,7 +11,9 @@
#include <linux/slab.h>
#include <linux/gpio.h>
#include <linux/irq.h>
+#include <linux/irqdomain.h>
#include <linux/interrupt.h>
+#include <linux/of.h>
#include <linux/mfd/stmpe.h>
/*
@@ -28,6 +30,7 @@
struct stmpe *stmpe;
struct device *dev;
struct mutex irq_lock;
+ struct irq_domain *domain;
int irq_base;
unsigned norequest_mask;
@@ -103,7 +106,7 @@
{
struct stmpe_gpio *stmpe_gpio = to_stmpe_gpio(chip);
- return stmpe_gpio->irq_base + offset;
+ return irq_create_mapping(stmpe_gpio->domain, offset);
}
static int stmpe_gpio_request(struct gpio_chip *chip, unsigned offset)
@@ -132,7 +135,7 @@
static int stmpe_gpio_irq_set_type(struct irq_data *d, unsigned int type)
{
struct stmpe_gpio *stmpe_gpio = irq_data_get_irq_chip_data(d);
- int offset = d->irq - stmpe_gpio->irq_base;
+ int offset = d->hwirq;
int regoffset = offset / 8;
int mask = 1 << (offset % 8);
@@ -199,7 +202,7 @@
static void stmpe_gpio_irq_mask(struct irq_data *d)
{
struct stmpe_gpio *stmpe_gpio = irq_data_get_irq_chip_data(d);
- int offset = d->irq - stmpe_gpio->irq_base;
+ int offset = d->hwirq;
int regoffset = offset / 8;
int mask = 1 << (offset % 8);
@@ -209,7 +212,7 @@
static void stmpe_gpio_irq_unmask(struct irq_data *d)
{
struct stmpe_gpio *stmpe_gpio = irq_data_get_irq_chip_data(d);
- int offset = d->irq - stmpe_gpio->irq_base;
+ int offset = d->hwirq;
int regoffset = offset / 8;
int mask = 1 << (offset % 8);
@@ -251,8 +254,9 @@
while (stat) {
int bit = __ffs(stat);
int line = bank * 8 + bit;
+ int virq = irq_find_mapping(stmpe_gpio->domain, line);
- handle_nested_irq(stmpe_gpio->irq_base + line);
+ handle_nested_irq(virq);
stat &= ~(1 << bit);
}
@@ -267,43 +271,61 @@
return IRQ_HANDLED;
}
-static int __devinit stmpe_gpio_irq_init(struct stmpe_gpio *stmpe_gpio)
+int stmpe_gpio_irq_map(struct irq_domain *d, unsigned int virq,
+ irq_hw_number_t hwirq)
+{
+ struct stmpe_gpio *stmpe_gpio = d->host_data;
+
+ if (!stmpe_gpio)
+ return -EINVAL;
+
+ irq_set_chip_data(hwirq, stmpe_gpio);
+ irq_set_chip_and_handler(hwirq, &stmpe_gpio_irq_chip,
+ handle_simple_irq);
+ irq_set_nested_thread(hwirq, 1);
+#ifdef CONFIG_ARM
+ set_irq_flags(hwirq, IRQF_VALID);
+#else
+ irq_set_noprobe(hwirq);
+#endif
+
+ return 0;
+}
+
+void stmpe_gpio_irq_unmap(struct irq_domain *d, unsigned int virq)
+{
+#ifdef CONFIG_ARM
+ set_irq_flags(virq, 0);
+#endif
+ irq_set_chip_and_handler(virq, NULL, NULL);
+ irq_set_chip_data(virq, NULL);
+}
+
+static const struct irq_domain_ops stmpe_gpio_irq_simple_ops = {
+ .unmap = stmpe_gpio_irq_unmap,
+ .map = stmpe_gpio_irq_map,
+ .xlate = irq_domain_xlate_twocell,
+};
+
+static int stmpe_gpio_irq_init(struct stmpe_gpio *stmpe_gpio)
{
int base = stmpe_gpio->irq_base;
- int irq;
- for (irq = base; irq < base + stmpe_gpio->chip.ngpio; irq++) {
- irq_set_chip_data(irq, stmpe_gpio);
- irq_set_chip_and_handler(irq, &stmpe_gpio_irq_chip,
- handle_simple_irq);
- irq_set_nested_thread(irq, 1);
-#ifdef CONFIG_ARM
- set_irq_flags(irq, IRQF_VALID);
-#else
- irq_set_noprobe(irq);
-#endif
+ stmpe_gpio->domain = irq_domain_add_simple(NULL,
+ stmpe_gpio->chip.ngpio, base,
+ &stmpe_gpio_irq_simple_ops, stmpe_gpio);
+ if (!stmpe_gpio->domain) {
+ dev_err(stmpe_gpio->dev, "failed to create irqdomain\n");
+ return -ENOSYS;
}
return 0;
}
-static void stmpe_gpio_irq_remove(struct stmpe_gpio *stmpe_gpio)
-{
- int base = stmpe_gpio->irq_base;
- int irq;
-
- for (irq = base; irq < base + stmpe_gpio->chip.ngpio; irq++) {
-#ifdef CONFIG_ARM
- set_irq_flags(irq, 0);
-#endif
- irq_set_chip_and_handler(irq, NULL, NULL);
- irq_set_chip_data(irq, NULL);
- }
-}
-
-static int __devinit stmpe_gpio_probe(struct platform_device *pdev)
+static int stmpe_gpio_probe(struct platform_device *pdev)
{
struct stmpe *stmpe = dev_get_drvdata(pdev->dev.parent);
+ struct device_node *np = pdev->dev.of_node;
struct stmpe_gpio_platform_data *pdata;
struct stmpe_gpio *stmpe_gpio;
int ret;
@@ -321,13 +343,17 @@
stmpe_gpio->dev = &pdev->dev;
stmpe_gpio->stmpe = stmpe;
- stmpe_gpio->norequest_mask = pdata ? pdata->norequest_mask : 0;
-
stmpe_gpio->chip = template_chip;
stmpe_gpio->chip.ngpio = stmpe->num_gpios;
stmpe_gpio->chip.dev = &pdev->dev;
stmpe_gpio->chip.base = pdata ? pdata->gpio_base : -1;
+ if (pdata)
+ stmpe_gpio->norequest_mask = pdata->norequest_mask;
+ else if (np)
+ of_property_read_u32(np, "st,norequest-mask",
+ &stmpe_gpio->norequest_mask);
+
if (irq >= 0)
stmpe_gpio->irq_base = stmpe->irq_base + STMPE_INT_GPIO(0);
else
@@ -348,7 +374,7 @@
IRQF_ONESHOT, "stmpe-gpio", stmpe_gpio);
if (ret) {
dev_err(&pdev->dev, "unable to get irq: %d\n", ret);
- goto out_removeirq;
+ goto out_disable;
}
}
@@ -368,9 +394,6 @@
out_freeirq:
if (irq >= 0)
free_irq(irq, stmpe_gpio);
-out_removeirq:
- if (irq >= 0)
- stmpe_gpio_irq_remove(stmpe_gpio);
out_disable:
stmpe_disable(stmpe, STMPE_BLOCK_GPIO);
out_free:
@@ -378,7 +401,7 @@
return ret;
}
-static int __devexit stmpe_gpio_remove(struct platform_device *pdev)
+static int stmpe_gpio_remove(struct platform_device *pdev)
{
struct stmpe_gpio *stmpe_gpio = platform_get_drvdata(pdev);
struct stmpe *stmpe = stmpe_gpio->stmpe;
@@ -398,10 +421,9 @@
stmpe_disable(stmpe, STMPE_BLOCK_GPIO);
- if (irq >= 0) {
+ if (irq >= 0)
free_irq(irq, stmpe_gpio);
- stmpe_gpio_irq_remove(stmpe_gpio);
- }
+
platform_set_drvdata(pdev, NULL);
kfree(stmpe_gpio);
@@ -412,7 +434,7 @@
.driver.name = "stmpe-gpio",
.driver.owner = THIS_MODULE,
.probe = stmpe_gpio_probe,
- .remove = __devexit_p(stmpe_gpio_remove),
+ .remove = stmpe_gpio_remove,
};
static int __init stmpe_gpio_init(void)
diff --git a/drivers/gpio/gpio-stp-xway.c b/drivers/gpio/gpio-stp-xway.c
index 8bead0b..85841ee7 100644
--- a/drivers/gpio/gpio-stp-xway.c
+++ b/drivers/gpio/gpio-stp-xway.c
@@ -197,7 +197,7 @@
return 0;
}
-static int __devinit xway_stp_probe(struct platform_device *pdev)
+static int xway_stp_probe(struct platform_device *pdev)
{
struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
const __be32 *shadow, *groups, *dsl, *phy;
diff --git a/drivers/gpio/gpio-sx150x.c b/drivers/gpio/gpio-sx150x.c
index eb3e215..796b6c4 100644
--- a/drivers/gpio/gpio-sx150x.c
+++ b/drivers/gpio/gpio-sx150x.c
@@ -575,7 +575,7 @@
}
}
-static int __devinit sx150x_probe(struct i2c_client *client,
+static int sx150x_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
static const u32 i2c_funcs = I2C_FUNC_SMBUS_BYTE_DATA |
@@ -622,7 +622,7 @@
return rc;
}
-static int __devexit sx150x_remove(struct i2c_client *client)
+static int sx150x_remove(struct i2c_client *client)
{
struct sx150x_chip *chip;
int rc;
@@ -646,7 +646,7 @@
.owner = THIS_MODULE
},
.probe = sx150x_probe,
- .remove = __devexit_p(sx150x_remove),
+ .remove = sx150x_remove,
.id_table = sx150x_id,
};
diff --git a/drivers/gpio/gpio-tc3589x.c b/drivers/gpio/gpio-tc3589x.c
index 1e48317..c0595bb 100644
--- a/drivers/gpio/gpio-tc3589x.c
+++ b/drivers/gpio/gpio-tc3589x.c
@@ -292,17 +292,15 @@
{
int base = tc3589x_gpio->irq_base;
- if (base) {
- tc3589x_gpio->domain = irq_domain_add_legacy(
- NULL, tc3589x_gpio->chip.ngpio, base,
- 0, &tc3589x_irq_ops, tc3589x_gpio);
- }
- else {
- tc3589x_gpio->domain = irq_domain_add_linear(
- np, tc3589x_gpio->chip.ngpio,
- &tc3589x_irq_ops, tc3589x_gpio);
- }
-
+ /*
+ * If this results in a linear domain, irq_create_mapping() will
+ * take care of allocating IRQ descriptors at runtime. When a base
+ * is provided, the IRQ descriptors will be allocated when the
+ * domain is instantiated.
+ */
+ tc3589x_gpio->domain = irq_domain_add_simple(np,
+ tc3589x_gpio->chip.ngpio, base, &tc3589x_irq_ops,
+ tc3589x_gpio);
if (!tc3589x_gpio->domain) {
dev_err(tc3589x_gpio->dev, "Failed to create irqdomain\n");
return -ENOSYS;
@@ -311,7 +309,7 @@
return 0;
}
-static int __devinit tc3589x_gpio_probe(struct platform_device *pdev)
+static int tc3589x_gpio_probe(struct platform_device *pdev)
{
struct tc3589x *tc3589x = dev_get_drvdata(pdev->dev.parent);
struct tc3589x_gpio_platform_data *pdata;
@@ -389,7 +387,7 @@
return ret;
}
-static int __devexit tc3589x_gpio_remove(struct platform_device *pdev)
+static int tc3589x_gpio_remove(struct platform_device *pdev)
{
struct tc3589x_gpio *tc3589x_gpio = platform_get_drvdata(pdev);
struct tc3589x *tc3589x = tc3589x_gpio->tc3589x;
@@ -419,7 +417,7 @@
.driver.name = "tc3589x-gpio",
.driver.owner = THIS_MODULE,
.probe = tc3589x_gpio_probe,
- .remove = __devexit_p(tc3589x_gpio_remove),
+ .remove = tc3589x_gpio_remove,
};
static int __init tc3589x_gpio_init(void)
diff --git a/drivers/gpio/gpio-tegra.c b/drivers/gpio/gpio-tegra.c
index d982593..63cb643 100644
--- a/drivers/gpio/gpio-tegra.c
+++ b/drivers/gpio/gpio-tegra.c
@@ -27,6 +27,7 @@
#include <linux/module.h>
#include <linux/irqdomain.h>
#include <linux/pinctrl/consumer.h>
+#include <linux/pm.h>
#include <asm/mach/irq.h>
@@ -64,7 +65,7 @@
int bank;
int irq;
spinlock_t lvl_lock[4];
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
u32 cnf[4];
u32 out[4];
u32 oe[4];
@@ -109,20 +110,18 @@
{
tegra_gpio_mask_write(GPIO_MSK_CNF(gpio), gpio, 1);
}
-EXPORT_SYMBOL_GPL(tegra_gpio_enable);
static void tegra_gpio_disable(int gpio)
{
tegra_gpio_mask_write(GPIO_MSK_CNF(gpio), gpio, 0);
}
-EXPORT_SYMBOL_GPL(tegra_gpio_disable);
-int tegra_gpio_request(struct gpio_chip *chip, unsigned offset)
+static int tegra_gpio_request(struct gpio_chip *chip, unsigned offset)
{
return pinctrl_request_gpio(offset);
}
-void tegra_gpio_free(struct gpio_chip *chip, unsigned offset)
+static void tegra_gpio_free(struct gpio_chip *chip, unsigned offset)
{
pinctrl_free_gpio(offset);
tegra_gpio_disable(offset);
@@ -135,6 +134,11 @@
static int tegra_gpio_get(struct gpio_chip *chip, unsigned offset)
{
+ /* If gpio is in output mode then read from the out value */
+ if ((tegra_gpio_readl(GPIO_OE(offset)) >> GPIO_BIT(offset)) & 1)
+ return (tegra_gpio_readl(GPIO_OUT(offset)) >>
+ GPIO_BIT(offset)) & 0x1;
+
return (tegra_gpio_readl(GPIO_IN(offset)) >> GPIO_BIT(offset)) & 0x1;
}
@@ -285,8 +289,8 @@
}
-#ifdef CONFIG_PM
-void tegra_gpio_resume(void)
+#ifdef CONFIG_PM_SLEEP
+static int tegra_gpio_resume(struct device *dev)
{
unsigned long flags;
int b;
@@ -308,9 +312,10 @@
}
local_irq_restore(flags);
+ return 0;
}
-void tegra_gpio_suspend(void)
+static int tegra_gpio_suspend(struct device *dev)
{
unsigned long flags;
int b;
@@ -330,6 +335,7 @@
}
}
local_irq_restore(flags);
+ return 0;
}
static int tegra_gpio_wake_enable(struct irq_data *d, unsigned int enable)
@@ -345,11 +351,15 @@
.irq_mask = tegra_gpio_irq_mask,
.irq_unmask = tegra_gpio_irq_unmask,
.irq_set_type = tegra_gpio_irq_set_type,
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
.irq_set_wake = tegra_gpio_wake_enable,
#endif
};
+static const struct dev_pm_ops tegra_gpio_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(tegra_gpio_suspend, tegra_gpio_resume)
+};
+
struct tegra_gpio_soc_config {
u32 bank_stride;
u32 upper_offset;
@@ -365,7 +375,7 @@
.upper_offset = 0x80,
};
-static struct of_device_id tegra_gpio_of_match[] __devinitdata = {
+static struct of_device_id tegra_gpio_of_match[] = {
{ .compatible = "nvidia,tegra30-gpio", .data = &tegra30_gpio_config },
{ .compatible = "nvidia,tegra20-gpio", .data = &tegra20_gpio_config },
{ },
@@ -376,11 +386,10 @@
*/
static struct lock_class_key gpio_lock_class;
-static int __devinit tegra_gpio_probe(struct platform_device *pdev)
+static int tegra_gpio_probe(struct platform_device *pdev)
{
const struct of_device_id *match;
struct tegra_gpio_soc_config *config;
- int irq_base;
struct resource *res;
struct tegra_gpio_bank *bank;
int gpio;
@@ -417,14 +426,11 @@
return -ENODEV;
}
- irq_base = irq_alloc_descs(-1, 0, tegra_gpio_chip.ngpio, 0);
- if (irq_base < 0) {
- dev_err(&pdev->dev, "Couldn't allocate IRQ numbers\n");
- return -ENODEV;
- }
- irq_domain = irq_domain_add_legacy(pdev->dev.of_node,
- tegra_gpio_chip.ngpio, irq_base, 0,
+ irq_domain = irq_domain_add_linear(pdev->dev.of_node,
+ tegra_gpio_chip.ngpio,
&irq_domain_simple_ops, NULL);
+ if (!irq_domain)
+ return -ENODEV;
for (i = 0; i < tegra_gpio_bank_count; i++) {
res = platform_get_resource(pdev, IORESOURCE_IRQ, i);
@@ -464,7 +470,7 @@
gpiochip_add(&tegra_gpio_chip);
for (gpio = 0; gpio < tegra_gpio_chip.ngpio; gpio++) {
- int irq = irq_find_mapping(irq_domain, gpio);
+ int irq = irq_create_mapping(irq_domain, gpio);
/* No validity check; all Tegra GPIOs are valid IRQs */
bank = &tegra_gpio_banks[GPIO_BANK(gpio)];
@@ -493,6 +499,7 @@
.driver = {
.name = "tegra-gpio",
.owner = THIS_MODULE,
+ .pm = &tegra_gpio_pm_ops,
.of_match_table = tegra_gpio_of_match,
},
.probe = tegra_gpio_probe,
diff --git a/drivers/gpio/gpio-timberdale.c b/drivers/gpio/gpio-timberdale.c
index 1a3e2b9..702cca9 100644
--- a/drivers/gpio/gpio-timberdale.c
+++ b/drivers/gpio/gpio-timberdale.c
@@ -222,7 +222,7 @@
.irq_set_type = timbgpio_irq_type,
};
-static int __devinit timbgpio_probe(struct platform_device *pdev)
+static int timbgpio_probe(struct platform_device *pdev)
{
int err, i;
struct gpio_chip *gc;
@@ -316,7 +316,7 @@
return err;
}
-static int __devexit timbgpio_remove(struct platform_device *pdev)
+static int timbgpio_remove(struct platform_device *pdev)
{
int err;
struct timbgpio_platform_data *pdata = pdev->dev.platform_data;
diff --git a/drivers/gpio/gpio-tps6586x.c b/drivers/gpio/gpio-tps6586x.c
index 2526b3b..c1b82da 100644
--- a/drivers/gpio/gpio-tps6586x.c
+++ b/drivers/gpio/gpio-tps6586x.c
@@ -80,7 +80,7 @@
val, mask);
}
-static int __devinit tps6586x_gpio_probe(struct platform_device *pdev)
+static int tps6586x_gpio_probe(struct platform_device *pdev)
{
struct tps6586x_platform_data *pdata;
struct tps6586x_gpio *tps6586x_gpio;
@@ -126,7 +126,7 @@
return ret;
}
-static int __devexit tps6586x_gpio_remove(struct platform_device *pdev)
+static int tps6586x_gpio_remove(struct platform_device *pdev)
{
struct tps6586x_gpio *tps6586x_gpio = platform_get_drvdata(pdev);
@@ -137,7 +137,7 @@
.driver.name = "tps6586x-gpio",
.driver.owner = THIS_MODULE,
.probe = tps6586x_gpio_probe,
- .remove = __devexit_p(tps6586x_gpio_remove),
+ .remove = tps6586x_gpio_remove,
};
static int __init tps6586x_gpio_init(void)
diff --git a/drivers/gpio/gpio-tps65910.c b/drivers/gpio/gpio-tps65910.c
index 11f29c8..5083825 100644
--- a/drivers/gpio/gpio-tps65910.c
+++ b/drivers/gpio/gpio-tps65910.c
@@ -113,7 +113,7 @@
}
#endif
-static int __devinit tps65910_gpio_probe(struct platform_device *pdev)
+static int tps65910_gpio_probe(struct platform_device *pdev)
{
struct tps65910 *tps65910 = dev_get_drvdata(pdev->dev.parent);
struct tps65910_board *pdata = dev_get_platdata(tps65910->dev);
@@ -188,7 +188,7 @@
return ret;
}
-static int __devexit tps65910_gpio_remove(struct platform_device *pdev)
+static int tps65910_gpio_remove(struct platform_device *pdev)
{
struct tps65910_gpio *tps65910_gpio = platform_get_drvdata(pdev);
@@ -199,7 +199,7 @@
.driver.name = "tps65910-gpio",
.driver.owner = THIS_MODULE,
.probe = tps65910_gpio_probe,
- .remove = __devexit_p(tps65910_gpio_remove),
+ .remove = tps65910_gpio_remove,
};
static int __init tps65910_gpio_init(void)
diff --git a/drivers/gpio/gpio-tps65912.c b/drivers/gpio/gpio-tps65912.c
index 99106d1..30a5844 100644
--- a/drivers/gpio/gpio-tps65912.c
+++ b/drivers/gpio/gpio-tps65912.c
@@ -84,7 +84,7 @@
.base = -1,
};
-static int __devinit tps65912_gpio_probe(struct platform_device *pdev)
+static int tps65912_gpio_probe(struct platform_device *pdev)
{
struct tps65912 *tps65912 = dev_get_drvdata(pdev->dev.parent);
struct tps65912_board *pdata = tps65912->dev->platform_data;
@@ -113,7 +113,7 @@
return ret;
}
-static int __devexit tps65912_gpio_remove(struct platform_device *pdev)
+static int tps65912_gpio_remove(struct platform_device *pdev)
{
struct tps65912_gpio_data *tps65912_gpio = platform_get_drvdata(pdev);
@@ -126,7 +126,7 @@
.owner = THIS_MODULE,
},
.probe = tps65912_gpio_probe,
- .remove = __devexit_p(tps65912_gpio_remove),
+ .remove = tps65912_gpio_remove,
};
static int __init tps65912_gpio_init(void)
diff --git a/drivers/gpio/gpio-ts5500.c b/drivers/gpio/gpio-ts5500.c
new file mode 100644
index 0000000..0634cee
--- /dev/null
+++ b/drivers/gpio/gpio-ts5500.c
@@ -0,0 +1,466 @@
+/*
+ * Digital I/O driver for Technologic Systems TS-5500
+ *
+ * Copyright (c) 2012 Savoir-faire Linux Inc.
+ * Vivien Didelot <vivien.didelot@savoirfairelinux.com>
+ *
+ * Technologic Systems platforms have pin blocks, exposing several Digital
+ * Input/Output lines (DIO). This driver aims to support single pin blocks.
+ * In that sense, the support is not limited to the TS-5500 blocks.
+ * Actually, the following platforms have DIO support:
+ *
+ * TS-5500:
+ * Documentation: http://wiki.embeddedarm.com/wiki/TS-5500
+ * Blocks: DIO1, DIO2 and LCD port.
+ *
+ * TS-5600:
+ * Documentation: http://wiki.embeddedarm.com/wiki/TS-5600
+ * Blocks: LCD port (identical to TS-5500 LCD).
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/bitops.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_data/gpio-ts5500.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+/* List of supported Technologic Systems platforms DIO blocks */
+enum ts5500_blocks { TS5500_DIO1, TS5500_DIO2, TS5500_LCD, TS5600_LCD };
+
+struct ts5500_priv {
+ const struct ts5500_dio *pinout;
+ struct gpio_chip gpio_chip;
+ spinlock_t lock;
+ bool strap;
+ u8 hwirq;
+};
+
+/*
+ * Hex 7D is used to control several blocks (e.g. DIO2 and LCD port).
+ * This flag ensures that the region has been requested by this driver.
+ */
+static bool hex7d_reserved;
+
+/*
+ * This structure is used to describe capabilities of DIO lines,
+ * such as available directions and connected interrupt (if any).
+ */
+struct ts5500_dio {
+ const u8 value_addr;
+ const u8 value_mask;
+ const u8 control_addr;
+ const u8 control_mask;
+ const bool no_input;
+ const bool no_output;
+ const u8 irq;
+};
+
+#define TS5500_DIO_IN_OUT(vaddr, vbit, caddr, cbit) \
+ { \
+ .value_addr = vaddr, \
+ .value_mask = BIT(vbit), \
+ .control_addr = caddr, \
+ .control_mask = BIT(cbit), \
+ }
+
+#define TS5500_DIO_IN(addr, bit) \
+ { \
+ .value_addr = addr, \
+ .value_mask = BIT(bit), \
+ .no_output = true, \
+ }
+
+#define TS5500_DIO_IN_IRQ(addr, bit, _irq) \
+ { \
+ .value_addr = addr, \
+ .value_mask = BIT(bit), \
+ .no_output = true, \
+ .irq = _irq, \
+ }
+
+#define TS5500_DIO_OUT(addr, bit) \
+ { \
+ .value_addr = addr, \
+ .value_mask = BIT(bit), \
+ .no_input = true, \
+ }
+
+/*
+ * Input/Output DIO lines are programmed in groups of 4. Their values are
+ * available through 4 consecutive bits in a value port, whereas the direction
+ * of these 4 lines is driven by only 1 bit in a control port.
+ */
+#define TS5500_DIO_GROUP(vaddr, vbitfrom, caddr, cbit) \
+ TS5500_DIO_IN_OUT(vaddr, vbitfrom + 0, caddr, cbit), \
+ TS5500_DIO_IN_OUT(vaddr, vbitfrom + 1, caddr, cbit), \
+ TS5500_DIO_IN_OUT(vaddr, vbitfrom + 2, caddr, cbit), \
+ TS5500_DIO_IN_OUT(vaddr, vbitfrom + 3, caddr, cbit)
+
+/*
+ * TS-5500 DIO1 block
+ *
+ * value control dir hw
+ * addr bit addr bit in out irq name pin offset
+ *
+ * 0x7b 0 0x7a 0 x x DIO1_0 1 0
+ * 0x7b 1 0x7a 0 x x DIO1_1 3 1
+ * 0x7b 2 0x7a 0 x x DIO1_2 5 2
+ * 0x7b 3 0x7a 0 x x DIO1_3 7 3
+ * 0x7b 4 0x7a 1 x x DIO1_4 9 4
+ * 0x7b 5 0x7a 1 x x DIO1_5 11 5
+ * 0x7b 6 0x7a 1 x x DIO1_6 13 6
+ * 0x7b 7 0x7a 1 x x DIO1_7 15 7
+ * 0x7c 0 0x7a 5 x x DIO1_8 4 8
+ * 0x7c 1 0x7a 5 x x DIO1_9 6 9
+ * 0x7c 2 0x7a 5 x x DIO1_10 8 10
+ * 0x7c 3 0x7a 5 x x DIO1_11 10 11
+ * 0x7c 4 x DIO1_12 12 12
+ * 0x7c 5 x 7 DIO1_13 14 13
+ */
+static const struct ts5500_dio ts5500_dio1[] = {
+ TS5500_DIO_GROUP(0x7b, 0, 0x7a, 0),
+ TS5500_DIO_GROUP(0x7b, 4, 0x7a, 1),
+ TS5500_DIO_GROUP(0x7c, 0, 0x7a, 5),
+ TS5500_DIO_IN(0x7c, 4),
+ TS5500_DIO_IN_IRQ(0x7c, 5, 7),
+};
+
+/*
+ * TS-5500 DIO2 block
+ *
+ * value control dir hw
+ * addr bit addr bit in out irq name pin offset
+ *
+ * 0x7e 0 0x7d 0 x x DIO2_0 1 0
+ * 0x7e 1 0x7d 0 x x DIO2_1 3 1
+ * 0x7e 2 0x7d 0 x x DIO2_2 5 2
+ * 0x7e 3 0x7d 0 x x DIO2_3 7 3
+ * 0x7e 4 0x7d 1 x x DIO2_4 9 4
+ * 0x7e 5 0x7d 1 x x DIO2_5 11 5
+ * 0x7e 6 0x7d 1 x x DIO2_6 13 6
+ * 0x7e 7 0x7d 1 x x DIO2_7 15 7
+ * 0x7f 0 0x7d 5 x x DIO2_8 4 8
+ * 0x7f 1 0x7d 5 x x DIO2_9 6 9
+ * 0x7f 2 0x7d 5 x x DIO2_10 8 10
+ * 0x7f 3 0x7d 5 x x DIO2_11 10 11
+ * 0x7f 4 x 6 DIO2_13 14 12
+ */
+static const struct ts5500_dio ts5500_dio2[] = {
+ TS5500_DIO_GROUP(0x7e, 0, 0x7d, 0),
+ TS5500_DIO_GROUP(0x7e, 4, 0x7d, 1),
+ TS5500_DIO_GROUP(0x7f, 0, 0x7d, 5),
+ TS5500_DIO_IN_IRQ(0x7f, 4, 6),
+};
+
+/*
+ * TS-5500 LCD port used as DIO block
+ * TS-5600 LCD port is identical
+ *
+ * value control dir hw
+ * addr bit addr bit in out irq name pin offset
+ *
+ * 0x72 0 0x7d 2 x x LCD_0 8 0
+ * 0x72 1 0x7d 2 x x LCD_1 7 1
+ * 0x72 2 0x7d 2 x x LCD_2 10 2
+ * 0x72 3 0x7d 2 x x LCD_3 9 3
+ * 0x72 4 0x7d 3 x x LCD_4 12 4
+ * 0x72 5 0x7d 3 x x LCD_5 11 5
+ * 0x72 6 0x7d 3 x x LCD_6 14 6
+ * 0x72 7 0x7d 3 x x LCD_7 13 7
+ * 0x73 0 x LCD_EN 5 8
+ * 0x73 6 x LCD_WR 6 9
+ * 0x73 7 x 1 LCD_RS 3 10
+ */
+static const struct ts5500_dio ts5500_lcd[] = {
+ TS5500_DIO_GROUP(0x72, 0, 0x7d, 2),
+ TS5500_DIO_GROUP(0x72, 4, 0x7d, 3),
+ TS5500_DIO_OUT(0x73, 0),
+ TS5500_DIO_IN(0x73, 6),
+ TS5500_DIO_IN_IRQ(0x73, 7, 1),
+};
+
+static inline struct ts5500_priv *ts5500_gc_to_priv(struct gpio_chip *chip)
+{
+ return container_of(chip, struct ts5500_priv, gpio_chip);
+}
+
+static inline void ts5500_set_mask(u8 mask, u8 addr)
+{
+ u8 val = inb(addr);
+ val |= mask;
+ outb(val, addr);
+}
+
+static inline void ts5500_clear_mask(u8 mask, u8 addr)
+{
+ u8 val = inb(addr);
+ val &= ~mask;
+ outb(val, addr);
+}
+
+static int ts5500_gpio_input(struct gpio_chip *chip, unsigned offset)
+{
+ struct ts5500_priv *priv = ts5500_gc_to_priv(chip);
+ const struct ts5500_dio line = priv->pinout[offset];
+ unsigned long flags;
+
+ if (line.no_input)
+ return -ENXIO;
+
+ if (line.no_output)
+ return 0;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ ts5500_clear_mask(line.control_mask, line.control_addr);
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ return 0;
+}
+
+static int ts5500_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+ struct ts5500_priv *priv = ts5500_gc_to_priv(chip);
+ const struct ts5500_dio line = priv->pinout[offset];
+
+ return !!(inb(line.value_addr) & line.value_mask);
+}
+
+static int ts5500_gpio_output(struct gpio_chip *chip, unsigned offset, int val)
+{
+ struct ts5500_priv *priv = ts5500_gc_to_priv(chip);
+ const struct ts5500_dio line = priv->pinout[offset];
+ unsigned long flags;
+
+ if (line.no_output)
+ return -ENXIO;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ if (!line.no_input)
+ ts5500_set_mask(line.control_mask, line.control_addr);
+
+ if (val)
+ ts5500_set_mask(line.value_mask, line.value_addr);
+ else
+ ts5500_clear_mask(line.value_mask, line.value_addr);
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ return 0;
+}
+
+static void ts5500_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
+{
+ struct ts5500_priv *priv = ts5500_gc_to_priv(chip);
+ const struct ts5500_dio line = priv->pinout[offset];
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ if (val)
+ ts5500_set_mask(line.value_mask, line.value_addr);
+ else
+ ts5500_clear_mask(line.value_mask, line.value_addr);
+ spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+static int ts5500_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+ struct ts5500_priv *priv = ts5500_gc_to_priv(chip);
+ const struct ts5500_dio *block = priv->pinout;
+ const struct ts5500_dio line = block[offset];
+
+ /* Only one pin is connected to an interrupt */
+ if (line.irq)
+ return line.irq;
+
+ /* As this pin is input-only, we may strap it to another in/out pin */
+ if (priv->strap)
+ return priv->hwirq;
+
+ return -ENXIO;
+}
+
+static int ts5500_enable_irq(struct ts5500_priv *priv)
+{
+ int ret = 0;
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ if (priv->hwirq == 7)
+ ts5500_set_mask(BIT(7), 0x7a); /* DIO1_13 on IRQ7 */
+ else if (priv->hwirq == 6)
+ ts5500_set_mask(BIT(7), 0x7d); /* DIO2_13 on IRQ6 */
+ else if (priv->hwirq == 1)
+ ts5500_set_mask(BIT(6), 0x7d); /* LCD_RS on IRQ1 */
+ else
+ ret = -EINVAL;
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ return ret;
+}
+
+static void ts5500_disable_irq(struct ts5500_priv *priv)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ if (priv->hwirq == 7)
+ ts5500_clear_mask(BIT(7), 0x7a); /* DIO1_13 on IRQ7 */
+ else if (priv->hwirq == 6)
+ ts5500_clear_mask(BIT(7), 0x7d); /* DIO2_13 on IRQ6 */
+ else if (priv->hwirq == 1)
+ ts5500_clear_mask(BIT(6), 0x7d); /* LCD_RS on IRQ1 */
+ else
+ dev_err(priv->gpio_chip.dev, "invalid hwirq %d\n", priv->hwirq);
+ spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+static int __devinit ts5500_dio_probe(struct platform_device *pdev)
+{
+ enum ts5500_blocks block = platform_get_device_id(pdev)->driver_data;
+ struct ts5500_dio_platform_data *pdata = pdev->dev.platform_data;
+ struct device *dev = &pdev->dev;
+ const char *name = dev_name(dev);
+ struct ts5500_priv *priv;
+ struct resource *res;
+ unsigned long flags;
+ int ret;
+
+ res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (!res) {
+ dev_err(dev, "missing IRQ resource\n");
+ return -EINVAL;
+ }
+
+ priv = devm_kzalloc(dev, sizeof(struct ts5500_priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, priv);
+ priv->hwirq = res->start;
+ spin_lock_init(&priv->lock);
+
+ priv->gpio_chip.owner = THIS_MODULE;
+ priv->gpio_chip.label = name;
+ priv->gpio_chip.dev = dev;
+ priv->gpio_chip.direction_input = ts5500_gpio_input;
+ priv->gpio_chip.direction_output = ts5500_gpio_output;
+ priv->gpio_chip.get = ts5500_gpio_get;
+ priv->gpio_chip.set = ts5500_gpio_set;
+ priv->gpio_chip.to_irq = ts5500_gpio_to_irq;
+ priv->gpio_chip.base = -1;
+ if (pdata) {
+ priv->gpio_chip.base = pdata->base;
+ priv->strap = pdata->strap;
+ }
+
+ switch (block) {
+ case TS5500_DIO1:
+ priv->pinout = ts5500_dio1;
+ priv->gpio_chip.ngpio = ARRAY_SIZE(ts5500_dio1);
+
+ if (!devm_request_region(dev, 0x7a, 3, name)) {
+ dev_err(dev, "failed to request %s ports\n", name);
+ return -EBUSY;
+ }
+ break;
+ case TS5500_DIO2:
+ priv->pinout = ts5500_dio2;
+ priv->gpio_chip.ngpio = ARRAY_SIZE(ts5500_dio2);
+
+ if (!devm_request_region(dev, 0x7e, 2, name)) {
+ dev_err(dev, "failed to request %s ports\n", name);
+ return -EBUSY;
+ }
+
+ if (hex7d_reserved)
+ break;
+
+ if (!devm_request_region(dev, 0x7d, 1, name)) {
+ dev_err(dev, "failed to request %s 7D\n", name);
+ return -EBUSY;
+ }
+
+ hex7d_reserved = true;
+ break;
+ case TS5500_LCD:
+ case TS5600_LCD:
+ priv->pinout = ts5500_lcd;
+ priv->gpio_chip.ngpio = ARRAY_SIZE(ts5500_lcd);
+
+ if (!devm_request_region(dev, 0x72, 2, name)) {
+ dev_err(dev, "failed to request %s ports\n", name);
+ return -EBUSY;
+ }
+
+ if (!hex7d_reserved) {
+ if (!devm_request_region(dev, 0x7d, 1, name)) {
+ dev_err(dev, "failed to request %s 7D\n", name);
+ return -EBUSY;
+ }
+
+ hex7d_reserved = true;
+ }
+
+ /* Ensure usage of LCD port as DIO */
+ spin_lock_irqsave(&priv->lock, flags);
+ ts5500_clear_mask(BIT(4), 0x7d);
+ spin_unlock_irqrestore(&priv->lock, flags);
+ break;
+ }
+
+ ret = gpiochip_add(&priv->gpio_chip);
+ if (ret) {
+ dev_err(dev, "failed to register the gpio chip\n");
+ return ret;
+ }
+
+ ret = ts5500_enable_irq(priv);
+ if (ret) {
+ dev_err(dev, "invalid interrupt %d\n", priv->hwirq);
+ goto cleanup;
+ }
+
+ return 0;
+cleanup:
+ if (gpiochip_remove(&priv->gpio_chip))
+ dev_err(dev, "failed to remove gpio chip\n");
+ return ret;
+}
+
+static int __devexit ts5500_dio_remove(struct platform_device *pdev)
+{
+ struct ts5500_priv *priv = platform_get_drvdata(pdev);
+
+ ts5500_disable_irq(priv);
+ return gpiochip_remove(&priv->gpio_chip);
+}
+
+static struct platform_device_id ts5500_dio_ids[] = {
+ { "ts5500-dio1", TS5500_DIO1 },
+ { "ts5500-dio2", TS5500_DIO2 },
+ { "ts5500-dio-lcd", TS5500_LCD },
+ { "ts5600-dio-lcd", TS5600_LCD },
+ { }
+};
+MODULE_DEVICE_TABLE(platform, ts5500_dio_ids);
+
+static struct platform_driver ts5500_dio_driver = {
+ .driver = {
+ .name = "ts5500-dio",
+ .owner = THIS_MODULE,
+ },
+ .probe = ts5500_dio_probe,
+ .remove = __devexit_p(ts5500_dio_remove),
+ .id_table = ts5500_dio_ids,
+};
+
+module_platform_driver(ts5500_dio_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Savoir-faire Linux Inc. <kernel@savoirfairelinux.com>");
+MODULE_DESCRIPTION("Technologic Systems TS-5500 Digital I/O driver");
diff --git a/drivers/gpio/gpio-twl4030.c b/drivers/gpio/gpio-twl4030.c
index c5f8ca2..00329f2 100644
--- a/drivers/gpio/gpio-twl4030.c
+++ b/drivers/gpio/gpio-twl4030.c
@@ -88,11 +88,15 @@
/*----------------------------------------------------------------------*/
/*
- * LED register offsets (use TWL4030_MODULE_{LED,PWMA,PWMB}))
+ * LED register offsets from TWL_MODULE_LED base
* PWMs A and B are dedicated to LEDs A and B, respectively.
*/
-#define TWL4030_LED_LEDEN 0x0
+#define TWL4030_LED_LEDEN_REG 0x00
+#define TWL4030_PWMAON_REG 0x01
+#define TWL4030_PWMAOFF_REG 0x02
+#define TWL4030_PWMBON_REG 0x03
+#define TWL4030_PWMBOFF_REG 0x04
/* LEDEN bits */
#define LEDEN_LEDAON BIT(0)
@@ -104,9 +108,6 @@
#define LEDEN_PWM_LENGTHA BIT(6)
#define LEDEN_PWM_LENGTHB BIT(7)
-#define TWL4030_PWMx_PWMxON 0x0
-#define TWL4030_PWMx_PWMxOFF 0x1
-
#define PWMxON_LENGTH BIT(7)
/*----------------------------------------------------------------------*/
@@ -145,7 +146,7 @@
else
cached_leden |= mask;
status = twl_i2c_write_u8(TWL4030_MODULE_LED, cached_leden,
- TWL4030_LED_LEDEN);
+ TWL4030_LED_LEDEN_REG);
mutex_unlock(&gpio_lock);
}
@@ -216,33 +217,33 @@
if (offset >= TWL4030_GPIO_MAX) {
u8 ledclr_mask = LEDEN_LEDAON | LEDEN_LEDAEXT
| LEDEN_LEDAPWM | LEDEN_PWM_LENGTHA;
- u8 module = TWL4030_MODULE_PWMA;
+ u8 reg = TWL4030_PWMAON_REG;
offset -= TWL4030_GPIO_MAX;
if (offset) {
ledclr_mask <<= 1;
- module = TWL4030_MODULE_PWMB;
+ reg = TWL4030_PWMBON_REG;
}
/* initialize PWM to always-drive */
- status = twl_i2c_write_u8(module, 0x7f,
- TWL4030_PWMx_PWMxOFF);
+ /* Configure PWM OFF register first */
+ status = twl_i2c_write_u8(TWL4030_MODULE_LED, 0x7f, reg + 1);
if (status < 0)
goto done;
- status = twl_i2c_write_u8(module, 0x7f,
- TWL4030_PWMx_PWMxON);
+
+ /* Followed by PWM ON register */
+ status = twl_i2c_write_u8(TWL4030_MODULE_LED, 0x7f, reg);
if (status < 0)
goto done;
/* init LED to not-driven (high) */
- module = TWL4030_MODULE_LED;
- status = twl_i2c_read_u8(module, &cached_leden,
- TWL4030_LED_LEDEN);
+ status = twl_i2c_read_u8(TWL4030_MODULE_LED, &cached_leden,
+ TWL4030_LED_LEDEN_REG);
if (status < 0)
goto done;
cached_leden &= ~ledclr_mask;
- status = twl_i2c_write_u8(module, cached_leden,
- TWL4030_LED_LEDEN);
+ status = twl_i2c_write_u8(TWL4030_MODULE_LED, cached_leden,
+ TWL4030_LED_LEDEN_REG);
if (status < 0)
goto done;
@@ -352,7 +353,7 @@
/*----------------------------------------------------------------------*/
-static int __devinit gpio_twl4030_pulls(u32 ups, u32 downs)
+static int gpio_twl4030_pulls(u32 ups, u32 downs)
{
u8 message[6];
unsigned i, gpio_bit;
@@ -377,7 +378,7 @@
REG_GPIOPUPDCTR1, 5);
}
-static int __devinit gpio_twl4030_debounce(u32 debounce, u8 mmc_cd)
+static int gpio_twl4030_debounce(u32 debounce, u8 mmc_cd)
{
u8 message[4];
@@ -419,7 +420,7 @@
return omap_twl_info;
}
-static int __devinit gpio_twl4030_probe(struct platform_device *pdev)
+static int gpio_twl4030_probe(struct platform_device *pdev)
{
struct twl4030_gpio_platform_data *pdata = pdev->dev.platform_data;
struct device_node *node = pdev->dev.of_node;
@@ -505,7 +506,7 @@
return ret;
}
-/* Cannot use __devexit as gpio_twl4030_probe() calls us */
+/* Cannot use as gpio_twl4030_probe() calls us */
static int gpio_twl4030_remove(struct platform_device *pdev)
{
struct twl4030_gpio_platform_data *pdata = pdev->dev.platform_data;
diff --git a/drivers/gpio/gpio-twl6040.c b/drivers/gpio/gpio-twl6040.c
index dd58e8b..0be82c6 100644
--- a/drivers/gpio/gpio-twl6040.c
+++ b/drivers/gpio/gpio-twl6040.c
@@ -82,7 +82,7 @@
/*----------------------------------------------------------------------*/
-static int __devinit gpo_twl6040_probe(struct platform_device *pdev)
+static int gpo_twl6040_probe(struct platform_device *pdev)
{
struct twl6040_gpo_data *pdata = pdev->dev.platform_data;
struct device *twl6040_core_dev = pdev->dev.parent;
@@ -113,7 +113,7 @@
return ret;
}
-static int __devexit gpo_twl6040_remove(struct platform_device *pdev)
+static int gpo_twl6040_remove(struct platform_device *pdev)
{
return gpiochip_remove(&twl6040gpo_chip);
}
diff --git a/drivers/gpio/gpio-vr41xx.c b/drivers/gpio/gpio-vr41xx.c
index 82d5c20..9902732 100644
--- a/drivers/gpio/gpio-vr41xx.c
+++ b/drivers/gpio/gpio-vr41xx.c
@@ -490,7 +490,7 @@
.to_irq = vr41xx_gpio_to_irq,
};
-static int __devinit giu_probe(struct platform_device *pdev)
+static int giu_probe(struct platform_device *pdev)
{
struct resource *res;
unsigned int trigger, i, pin;
@@ -552,7 +552,7 @@
return cascade_irq(irq, giu_get_irq);
}
-static int __devexit giu_remove(struct platform_device *pdev)
+static int giu_remove(struct platform_device *pdev)
{
if (giu_base) {
iounmap(giu_base);
@@ -564,7 +564,7 @@
static struct platform_driver giu_device_driver = {
.probe = giu_probe,
- .remove = __devexit_p(giu_remove),
+ .remove = giu_remove,
.driver = {
.name = "GIU",
.owner = THIS_MODULE,
diff --git a/drivers/gpio/gpio-vt8500.c b/drivers/gpio/gpio-vt8500.c
index bcd8e4a..b53320a 100644
--- a/drivers/gpio/gpio-vt8500.c
+++ b/drivers/gpio/gpio-vt8500.c
@@ -96,6 +96,7 @@
VT8500_BANK(0x5C, 0x84, 0xAC, 0xD4, 12),
VT8500_BANK(0x60, 0x88, 0xB0, 0xD8, 16),
VT8500_BANK(0x64, 0x8C, 0xB4, 0xDC, 22),
+ VT8500_BANK(0x500, 0x504, 0x508, 0x50C, 6),
},
};
@@ -115,6 +116,7 @@
VT8500_BANK(0x58, 0x98, 0xD8, 0x18, 32),
VT8500_BANK(0x5C, 0x9C, 0xDC, 0x1C, 32),
VT8500_BANK(0x7C, 0xBC, 0xFC, 0x3C, 32),
+ VT8500_BANK(0x500, 0x504, 0x508, 0x50C, 6),
},
};
@@ -269,7 +271,7 @@
{ /* Sentinel */ },
};
-static int __devinit vt8500_gpio_probe(struct platform_device *pdev)
+static int vt8500_gpio_probe(struct platform_device *pdev)
{
void __iomem *gpio_base;
struct device_node *np;
diff --git a/drivers/gpio/gpio-vx855.c b/drivers/gpio/gpio-vx855.c
index 76ebfe5..2b7252c 100644
--- a/drivers/gpio/gpio-vx855.c
+++ b/drivers/gpio/gpio-vx855.c
@@ -219,7 +219,7 @@
}
/* This platform device is ordinarily registered by the vx855 mfd driver */
-static __devinit int vx855gpio_probe(struct platform_device *pdev)
+static int vx855gpio_probe(struct platform_device *pdev)
{
struct resource *res_gpi;
struct resource *res_gpo;
@@ -284,7 +284,7 @@
return ret;
}
-static int __devexit vx855gpio_remove(struct platform_device *pdev)
+static int vx855gpio_remove(struct platform_device *pdev)
{
struct vx855_gpio *vg = platform_get_drvdata(pdev);
struct resource *res;
@@ -312,7 +312,7 @@
.owner = THIS_MODULE,
},
.probe = vx855gpio_probe,
- .remove = __devexit_p(vx855gpio_remove),
+ .remove = vx855gpio_remove,
};
module_platform_driver(vx855gpio_driver);
diff --git a/drivers/gpio/gpio-wm831x.c b/drivers/gpio/gpio-wm831x.c
index b6eda35..2a743e1 100644
--- a/drivers/gpio/gpio-wm831x.c
+++ b/drivers/gpio/gpio-wm831x.c
@@ -243,7 +243,7 @@
.can_sleep = 1,
};
-static int __devinit wm831x_gpio_probe(struct platform_device *pdev)
+static int wm831x_gpio_probe(struct platform_device *pdev)
{
struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
struct wm831x_pdata *pdata = wm831x->dev->platform_data;
@@ -275,7 +275,7 @@
return ret;
}
-static int __devexit wm831x_gpio_remove(struct platform_device *pdev)
+static int wm831x_gpio_remove(struct platform_device *pdev)
{
struct wm831x_gpio *wm831x_gpio = platform_get_drvdata(pdev);
@@ -286,7 +286,7 @@
.driver.name = "wm831x-gpio",
.driver.owner = THIS_MODULE,
.probe = wm831x_gpio_probe,
- .remove = __devexit_p(wm831x_gpio_remove),
+ .remove = wm831x_gpio_remove,
};
static int __init wm831x_gpio_init(void)
diff --git a/drivers/gpio/gpio-wm8350.c b/drivers/gpio/gpio-wm8350.c
index fb42938..0b598cf 100644
--- a/drivers/gpio/gpio-wm8350.c
+++ b/drivers/gpio/gpio-wm8350.c
@@ -109,7 +109,7 @@
.can_sleep = 1,
};
-static int __devinit wm8350_gpio_probe(struct platform_device *pdev)
+static int wm8350_gpio_probe(struct platform_device *pdev)
{
struct wm8350 *wm8350 = dev_get_drvdata(pdev->dev.parent);
struct wm8350_platform_data *pdata = wm8350->dev->platform_data;
@@ -141,7 +141,7 @@
return ret;
}
-static int __devexit wm8350_gpio_remove(struct platform_device *pdev)
+static int wm8350_gpio_remove(struct platform_device *pdev)
{
struct wm8350_gpio_data *wm8350_gpio = platform_get_drvdata(pdev);
@@ -152,7 +152,7 @@
.driver.name = "wm8350-gpio",
.driver.owner = THIS_MODULE,
.probe = wm8350_gpio_probe,
- .remove = __devexit_p(wm8350_gpio_remove),
+ .remove = wm8350_gpio_remove,
};
static int __init wm8350_gpio_init(void)
diff --git a/drivers/gpio/gpio-wm8994.c b/drivers/gpio/gpio-wm8994.c
index 1c764e7..ae409fd 100644
--- a/drivers/gpio/gpio-wm8994.c
+++ b/drivers/gpio/gpio-wm8994.c
@@ -245,7 +245,7 @@
.can_sleep = 1,
};
-static int __devinit wm8994_gpio_probe(struct platform_device *pdev)
+static int wm8994_gpio_probe(struct platform_device *pdev)
{
struct wm8994 *wm8994 = dev_get_drvdata(pdev->dev.parent);
struct wm8994_pdata *pdata = wm8994->dev->platform_data;
@@ -281,7 +281,7 @@
return ret;
}
-static int __devexit wm8994_gpio_remove(struct platform_device *pdev)
+static int wm8994_gpio_remove(struct platform_device *pdev)
{
struct wm8994_gpio *wm8994_gpio = platform_get_drvdata(pdev);
@@ -292,7 +292,7 @@
.driver.name = "wm8994-gpio",
.driver.owner = THIS_MODULE,
.probe = wm8994_gpio_probe,
- .remove = __devexit_p(wm8994_gpio_remove),
+ .remove = wm8994_gpio_remove,
};
static int __init wm8994_gpio_init(void)
diff --git a/drivers/gpio/gpio-xilinx.c b/drivers/gpio/gpio-xilinx.c
index 79b0fe8..9ae7aa8 100644
--- a/drivers/gpio/gpio-xilinx.c
+++ b/drivers/gpio/gpio-xilinx.c
@@ -159,7 +159,7 @@
* driver data structure. It returns 0, if the driver is bound to the GPIO
* device, or a negative value if there is an error.
*/
-static int __devinit xgpio_of_probe(struct device_node *np)
+static int xgpio_of_probe(struct device_node *np)
{
struct xgpio_instance *chip;
int status = 0;
@@ -209,7 +209,7 @@
return 0;
}
-static struct of_device_id xgpio_of_match[] __devinitdata = {
+static struct of_device_id xgpio_of_match[] = {
{ .compatible = "xlnx,xps-gpio-1.00.a", },
{ /* end of list */ },
};
diff --git a/drivers/gpio/gpiolib-acpi.c b/drivers/gpio/gpiolib-acpi.c
new file mode 100644
index 0000000..cbad6e9
--- /dev/null
+++ b/drivers/gpio/gpiolib-acpi.c
@@ -0,0 +1,54 @@
+/*
+ * ACPI helpers for GPIO API
+ *
+ * Copyright (C) 2012, Intel Corporation
+ * Authors: Mathias Nyman <mathias.nyman@linux.intel.com>
+ * Mika Westerberg <mika.westerberg@linux.intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/errno.h>
+#include <linux/gpio.h>
+#include <linux/export.h>
+#include <linux/acpi_gpio.h>
+#include <linux/acpi.h>
+
+static int acpi_gpiochip_find(struct gpio_chip *gc, void *data)
+{
+ if (!gc->dev)
+ return false;
+
+ return ACPI_HANDLE(gc->dev) == data;
+}
+
+/**
+ * acpi_get_gpio() - Translate ACPI GPIO pin to GPIO number usable with GPIO API
+ * @path: ACPI GPIO controller full path name, (e.g. "\\_SB.GPO1")
+ * @pin: ACPI GPIO pin number (0-based, controller-relative)
+ *
+ * Returns GPIO number to use with Linux generic GPIO API, or errno error value
+ */
+
+int acpi_get_gpio(char *path, int pin)
+{
+ struct gpio_chip *chip;
+ acpi_handle handle;
+ acpi_status status;
+
+ status = acpi_get_handle(NULL, path, &handle);
+ if (ACPI_FAILURE(status))
+ return -ENODEV;
+
+ chip = gpiochip_find(handle, acpi_gpiochip_find);
+ if (!chip)
+ return -ENODEV;
+
+ if (!gpio_is_valid(chip->base + pin))
+ return -EINVAL;
+
+ return chip->base + pin;
+}
+EXPORT_SYMBOL_GPL(acpi_get_gpio);
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index 58b9838..199fca1 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -191,6 +191,32 @@
return ret;
}
+/* caller ensures gpio is valid and requested, chip->get_direction may sleep */
+static int gpio_get_direction(unsigned gpio)
+{
+ struct gpio_chip *chip;
+ struct gpio_desc *desc = &gpio_desc[gpio];
+ int status = -EINVAL;
+
+ chip = gpio_to_chip(gpio);
+ gpio -= chip->base;
+
+ if (!chip->get_direction)
+ return status;
+
+ status = chip->get_direction(chip, gpio);
+ if (status > 0) {
+ /* GPIOF_DIR_IN, or other positive */
+ status = 1;
+ clear_bit(FLAG_IS_OUT, &desc->flags);
+ }
+ if (status == 0) {
+ /* GPIOF_DIR_OUT */
+ set_bit(FLAG_IS_OUT, &desc->flags);
+ }
+ return status;
+}
+
#ifdef CONFIG_GPIO_SYSFS
/* lock protects against unexport_gpio() being called while
@@ -223,6 +249,7 @@
struct device_attribute *attr, char *buf)
{
const struct gpio_desc *desc = dev_get_drvdata(dev);
+ unsigned gpio = desc - gpio_desc;
ssize_t status;
mutex_lock(&sysfs_lock);
@@ -230,6 +257,7 @@
if (!test_bit(FLAG_EXPORT, &desc->flags))
status = -EIO;
else
+ gpio_get_direction(gpio);
status = sprintf(buf, "%s\n",
test_bit(FLAG_IS_OUT, &desc->flags)
? "out" : "in");
@@ -704,8 +732,9 @@
{
unsigned long flags;
struct gpio_desc *desc;
- int status = -EINVAL;
+ int status;
const char *ioname = NULL;
+ struct device *dev;
/* can't export until sysfs is available ... */
if (!gpio_class.p) {
@@ -713,59 +742,66 @@
return -ENOENT;
}
- if (!gpio_is_valid(gpio))
- goto done;
+ if (!gpio_is_valid(gpio)) {
+ pr_debug("%s: gpio %d is not valid\n", __func__, gpio);
+ return -EINVAL;
+ }
mutex_lock(&sysfs_lock);
spin_lock_irqsave(&gpio_lock, flags);
desc = &gpio_desc[gpio];
- if (test_bit(FLAG_REQUESTED, &desc->flags)
- && !test_bit(FLAG_EXPORT, &desc->flags)) {
- status = 0;
- if (!desc->chip->direction_input
- || !desc->chip->direction_output)
- direction_may_change = false;
+ if (!test_bit(FLAG_REQUESTED, &desc->flags) ||
+ test_bit(FLAG_EXPORT, &desc->flags)) {
+ spin_unlock_irqrestore(&gpio_lock, flags);
+ pr_debug("%s: gpio %d unavailable (requested=%d, exported=%d)\n",
+ __func__, gpio,
+ test_bit(FLAG_REQUESTED, &desc->flags),
+ test_bit(FLAG_EXPORT, &desc->flags));
+ status = -EPERM;
+ goto fail_unlock;
}
+
+ if (!desc->chip->direction_input || !desc->chip->direction_output)
+ direction_may_change = false;
spin_unlock_irqrestore(&gpio_lock, flags);
if (desc->chip->names && desc->chip->names[gpio - desc->chip->base])
ioname = desc->chip->names[gpio - desc->chip->base];
- if (status == 0) {
- struct device *dev;
-
- dev = device_create(&gpio_class, desc->chip->dev, MKDEV(0, 0),
- desc, ioname ? ioname : "gpio%u", gpio);
- if (!IS_ERR(dev)) {
- status = sysfs_create_group(&dev->kobj,
- &gpio_attr_group);
-
- if (!status && direction_may_change)
- status = device_create_file(dev,
- &dev_attr_direction);
-
- if (!status && gpio_to_irq(gpio) >= 0
- && (direction_may_change
- || !test_bit(FLAG_IS_OUT,
- &desc->flags)))
- status = device_create_file(dev,
- &dev_attr_edge);
-
- if (status != 0)
- device_unregister(dev);
- } else
- status = PTR_ERR(dev);
- if (status == 0)
- set_bit(FLAG_EXPORT, &desc->flags);
+ dev = device_create(&gpio_class, desc->chip->dev, MKDEV(0, 0),
+ desc, ioname ? ioname : "gpio%u", gpio);
+ if (IS_ERR(dev)) {
+ status = PTR_ERR(dev);
+ goto fail_unlock;
}
- mutex_unlock(&sysfs_lock);
-
-done:
+ status = sysfs_create_group(&dev->kobj, &gpio_attr_group);
if (status)
- pr_debug("%s: gpio%d status %d\n", __func__, gpio, status);
+ goto fail_unregister_device;
+ if (direction_may_change) {
+ status = device_create_file(dev, &dev_attr_direction);
+ if (status)
+ goto fail_unregister_device;
+ }
+
+ if (gpio_to_irq(gpio) >= 0 && (direction_may_change ||
+ !test_bit(FLAG_IS_OUT, &desc->flags))) {
+ status = device_create_file(dev, &dev_attr_edge);
+ if (status)
+ goto fail_unregister_device;
+ }
+
+ set_bit(FLAG_EXPORT, &desc->flags);
+ mutex_unlock(&sysfs_lock);
+ return 0;
+
+fail_unregister_device:
+ device_unregister(dev);
+fail_unlock:
+ mutex_unlock(&sysfs_lock);
+ pr_debug("%s: gpio%d status %d\n", __func__, gpio, status);
return status;
}
EXPORT_SYMBOL_GPL(gpio_export);
@@ -1075,6 +1111,7 @@
* inputs (often with pullups enabled) so power
* usage is minimized. Linux code should set the
* gpio direction first thing; but until it does,
+ * and in case chip->get_direction is not set,
* we may expose the wrong direction in sysfs.
*/
gpio_desc[id].flags = !chip->direction_input
@@ -1304,9 +1341,15 @@
desc_set_label(desc, NULL);
module_put(chip->owner);
clear_bit(FLAG_REQUESTED, &desc->flags);
+ goto done;
}
}
-
+ if (chip->get_direction) {
+ /* chip->get_direction may sleep */
+ spin_unlock_irqrestore(&gpio_lock, flags);
+ gpio_get_direction(gpio);
+ spin_lock_irqsave(&gpio_lock, flags);
+ }
done:
if (status)
pr_debug("gpio_request: gpio-%d (%s) status %d\n",
@@ -1842,6 +1885,7 @@
if (!test_bit(FLAG_REQUESTED, &gdesc->flags))
continue;
+ gpio_get_direction(gpio);
is_out = test_bit(FLAG_IS_OUT, &gdesc->flags);
seq_printf(s, " gpio-%-3d (%-20.20s) %s %s",
gpio, gdesc->label,
diff --git a/drivers/hv/Kconfig b/drivers/hv/Kconfig
index 70f5dde..b38ef6d 100644
--- a/drivers/hv/Kconfig
+++ b/drivers/hv/Kconfig
@@ -13,4 +13,10 @@
help
Select this option to enable the Hyper-V Utilities.
+config HYPERV_BALLOON
+ tristate "Microsoft Hyper-V Balloon driver"
+ depends on HYPERV
+ help
+ Select this option to enable Hyper-V Balloon driver.
+
endmenu
diff --git a/drivers/hv/Makefile b/drivers/hv/Makefile
index a23938b..e6abfa0 100644
--- a/drivers/hv/Makefile
+++ b/drivers/hv/Makefile
@@ -1,5 +1,6 @@
obj-$(CONFIG_HYPERV) += hv_vmbus.o
obj-$(CONFIG_HYPERV_UTILS) += hv_utils.o
+obj-$(CONFIG_HYPERV_BALLOON) += hv_balloon.o
hv_vmbus-y := vmbus_drv.o \
hv.o connection.o channel.o \
diff --git a/drivers/hv/channel.c b/drivers/hv/channel.c
index f4c3d28..773a2f2 100644
--- a/drivers/hv/channel.c
+++ b/drivers/hv/channel.c
@@ -33,14 +33,6 @@
#define NUM_PAGES_SPANNED(addr, len) \
((PAGE_ALIGN(addr + len) >> PAGE_SHIFT) - (addr >> PAGE_SHIFT))
-/* Internal routines */
-static int create_gpadl_header(
- void *kbuffer, /* must be phys and virt contiguous */
- u32 size, /* page-size multiple */
- struct vmbus_channel_msginfo **msginfo,
- u32 *messagecount);
-static void vmbus_setevent(struct vmbus_channel *channel);
-
/*
* vmbus_setevent- Trigger an event notification on the specified
* channel.
diff --git a/drivers/hv/channel_mgmt.c b/drivers/hv/channel_mgmt.c
index 2b8b8d4..2f84c5c 100644
--- a/drivers/hv/channel_mgmt.c
+++ b/drivers/hv/channel_mgmt.c
@@ -265,14 +265,9 @@
{
struct vmbus_channel_offer_channel *offer;
struct vmbus_channel *newchannel;
- uuid_le *guidtype;
- uuid_le *guidinstance;
offer = (struct vmbus_channel_offer_channel *)hdr;
- guidtype = &offer->offer.if_type;
- guidinstance = &offer->offer.if_instance;
-
/* Allocate the channel object and save this offer. */
newchannel = alloc_channel();
if (!newchannel) {
@@ -470,7 +465,6 @@
{
struct vmbus_channel_msginfo *msginfo;
struct vmbus_channel_message_header *requestheader;
- struct vmbus_channel_initiate_contact *initiate;
struct vmbus_channel_version_response *version_response;
unsigned long flags;
@@ -484,8 +478,6 @@
if (requestheader->msgtype ==
CHANNELMSG_INITIATE_CONTACT) {
- initiate =
- (struct vmbus_channel_initiate_contact *)requestheader;
memcpy(&msginfo->response.version_response,
version_response,
sizeof(struct vmbus_channel_version_response));
diff --git a/drivers/hv/hv_balloon.c b/drivers/hv/hv_balloon.c
new file mode 100644
index 0000000..f6c0011
--- /dev/null
+++ b/drivers/hv/hv_balloon.c
@@ -0,0 +1,1041 @@
+/*
+ * Copyright (c) 2012, Microsoft Corporation.
+ *
+ * Author:
+ * K. Y. Srinivasan <kys@microsoft.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for more
+ * details.
+ *
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/mman.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/kthread.h>
+#include <linux/completion.h>
+#include <linux/memory_hotplug.h>
+#include <linux/memory.h>
+#include <linux/notifier.h>
+#include <linux/mman.h>
+#include <linux/percpu_counter.h>
+
+#include <linux/hyperv.h>
+
+/*
+ * We begin with definitions supporting the Dynamic Memory protocol
+ * with the host.
+ *
+ * Begin protocol definitions.
+ */
+
+
+
+/*
+ * Protocol versions. The low word is the minor version, the high word the major
+ * version.
+ *
+ * History:
+ * Initial version 1.0
+ * Changed to 0.1 on 2009/03/25
+ * Changes to 0.2 on 2009/05/14
+ * Changes to 0.3 on 2009/12/03
+ * Changed to 1.0 on 2011/04/05
+ */
+
+#define DYNMEM_MAKE_VERSION(Major, Minor) ((__u32)(((Major) << 16) | (Minor)))
+#define DYNMEM_MAJOR_VERSION(Version) ((__u32)(Version) >> 16)
+#define DYNMEM_MINOR_VERSION(Version) ((__u32)(Version) & 0xff)
+
+enum {
+ DYNMEM_PROTOCOL_VERSION_1 = DYNMEM_MAKE_VERSION(0, 3),
+ DYNMEM_PROTOCOL_VERSION_2 = DYNMEM_MAKE_VERSION(1, 0),
+
+ DYNMEM_PROTOCOL_VERSION_WIN7 = DYNMEM_PROTOCOL_VERSION_1,
+ DYNMEM_PROTOCOL_VERSION_WIN8 = DYNMEM_PROTOCOL_VERSION_2,
+
+ DYNMEM_PROTOCOL_VERSION_CURRENT = DYNMEM_PROTOCOL_VERSION_WIN8
+};
+
+
+
+/*
+ * Message Types
+ */
+
+enum dm_message_type {
+ /*
+ * Version 0.3
+ */
+ DM_ERROR = 0,
+ DM_VERSION_REQUEST = 1,
+ DM_VERSION_RESPONSE = 2,
+ DM_CAPABILITIES_REPORT = 3,
+ DM_CAPABILITIES_RESPONSE = 4,
+ DM_STATUS_REPORT = 5,
+ DM_BALLOON_REQUEST = 6,
+ DM_BALLOON_RESPONSE = 7,
+ DM_UNBALLOON_REQUEST = 8,
+ DM_UNBALLOON_RESPONSE = 9,
+ DM_MEM_HOT_ADD_REQUEST = 10,
+ DM_MEM_HOT_ADD_RESPONSE = 11,
+ DM_VERSION_03_MAX = 11,
+ /*
+ * Version 1.0.
+ */
+ DM_INFO_MESSAGE = 12,
+ DM_VERSION_1_MAX = 12
+};
+
+
+/*
+ * Structures defining the dynamic memory management
+ * protocol.
+ */
+
+union dm_version {
+ struct {
+ __u16 minor_version;
+ __u16 major_version;
+ };
+ __u32 version;
+} __packed;
+
+
+union dm_caps {
+ struct {
+ __u64 balloon:1;
+ __u64 hot_add:1;
+ __u64 reservedz:62;
+ } cap_bits;
+ __u64 caps;
+} __packed;
+
+union dm_mem_page_range {
+ struct {
+ /*
+ * The PFN number of the first page in the range.
+ * 40 bits is the architectural limit of a PFN
+ * number for AMD64.
+ */
+ __u64 start_page:40;
+ /*
+ * The number of pages in the range.
+ */
+ __u64 page_cnt:24;
+ } finfo;
+ __u64 page_range;
+} __packed;
+
+
+
+/*
+ * The header for all dynamic memory messages:
+ *
+ * type: Type of the message.
+ * size: Size of the message in bytes; including the header.
+ * trans_id: The guest is responsible for manufacturing this ID.
+ */
+
+struct dm_header {
+ __u16 type;
+ __u16 size;
+ __u32 trans_id;
+} __packed;
+
+/*
+ * A generic message format for dynamic memory.
+ * Specific message formats are defined later in the file.
+ */
+
+struct dm_message {
+ struct dm_header hdr;
+ __u8 data[]; /* enclosed message */
+} __packed;
+
+
+/*
+ * Specific message types supporting the dynamic memory protocol.
+ */
+
+/*
+ * Version negotiation message. Sent from the guest to the host.
+ * The guest is free to try different versions until the host
+ * accepts the version.
+ *
+ * dm_version: The protocol version requested.
+ * is_last_attempt: If TRUE, this is the last version guest will request.
+ * reservedz: Reserved field, set to zero.
+ */
+
+struct dm_version_request {
+ struct dm_header hdr;
+ union dm_version version;
+ __u32 is_last_attempt:1;
+ __u32 reservedz:31;
+} __packed;
+
+/*
+ * Version response message; Host to Guest and indicates
+ * if the host has accepted the version sent by the guest.
+ *
+ * is_accepted: If TRUE, host has accepted the version and the guest
+ * should proceed to the next stage of the protocol. FALSE indicates that
+ * guest should re-try with a different version.
+ *
+ * reservedz: Reserved field, set to zero.
+ */
+
+struct dm_version_response {
+ struct dm_header hdr;
+ __u64 is_accepted:1;
+ __u64 reservedz:63;
+} __packed;
+
+/*
+ * Message reporting capabilities. This is sent from the guest to the
+ * host.
+ */
+
+struct dm_capabilities {
+ struct dm_header hdr;
+ union dm_caps caps;
+ __u64 min_page_cnt;
+ __u64 max_page_number;
+} __packed;
+
+/*
+ * Response to the capabilities message. This is sent from the host to the
+ * guest. This message notifies if the host has accepted the guest's
+ * capabilities. If the host has not accepted, the guest must shutdown
+ * the service.
+ *
+ * is_accepted: Indicates if the host has accepted guest's capabilities.
+ * reservedz: Must be 0.
+ */
+
+struct dm_capabilities_resp_msg {
+ struct dm_header hdr;
+ __u64 is_accepted:1;
+ __u64 reservedz:63;
+} __packed;
+
+/*
+ * This message is used to report memory pressure from the guest.
+ * This message is not part of any transaction and there is no
+ * response to this message.
+ *
+ * num_avail: Available memory in pages.
+ * num_committed: Committed memory in pages.
+ * page_file_size: The accumulated size of all page files
+ * in the system in pages.
+ * zero_free: The nunber of zero and free pages.
+ * page_file_writes: The writes to the page file in pages.
+ * io_diff: An indicator of file cache efficiency or page file activity,
+ * calculated as File Cache Page Fault Count - Page Read Count.
+ * This value is in pages.
+ *
+ * Some of these metrics are Windows specific and fortunately
+ * the algorithm on the host side that computes the guest memory
+ * pressure only uses num_committed value.
+ */
+
+struct dm_status {
+ struct dm_header hdr;
+ __u64 num_avail;
+ __u64 num_committed;
+ __u64 page_file_size;
+ __u64 zero_free;
+ __u32 page_file_writes;
+ __u32 io_diff;
+} __packed;
+
+
+/*
+ * Message to ask the guest to allocate memory - balloon up message.
+ * This message is sent from the host to the guest. The guest may not be
+ * able to allocate as much memory as requested.
+ *
+ * num_pages: number of pages to allocate.
+ */
+
+struct dm_balloon {
+ struct dm_header hdr;
+ __u32 num_pages;
+ __u32 reservedz;
+} __packed;
+
+
+/*
+ * Balloon response message; this message is sent from the guest
+ * to the host in response to the balloon message.
+ *
+ * reservedz: Reserved; must be set to zero.
+ * more_pages: If FALSE, this is the last message of the transaction.
+ * if TRUE there will atleast one more message from the guest.
+ *
+ * range_count: The number of ranges in the range array.
+ *
+ * range_array: An array of page ranges returned to the host.
+ *
+ */
+
+struct dm_balloon_response {
+ struct dm_header hdr;
+ __u32 reservedz;
+ __u32 more_pages:1;
+ __u32 range_count:31;
+ union dm_mem_page_range range_array[];
+} __packed;
+
+/*
+ * Un-balloon message; this message is sent from the host
+ * to the guest to give guest more memory.
+ *
+ * more_pages: If FALSE, this is the last message of the transaction.
+ * if TRUE there will atleast one more message from the guest.
+ *
+ * reservedz: Reserved; must be set to zero.
+ *
+ * range_count: The number of ranges in the range array.
+ *
+ * range_array: An array of page ranges returned to the host.
+ *
+ */
+
+struct dm_unballoon_request {
+ struct dm_header hdr;
+ __u32 more_pages:1;
+ __u32 reservedz:31;
+ __u32 range_count;
+ union dm_mem_page_range range_array[];
+} __packed;
+
+/*
+ * Un-balloon response message; this message is sent from the guest
+ * to the host in response to an unballoon request.
+ *
+ */
+
+struct dm_unballoon_response {
+ struct dm_header hdr;
+} __packed;
+
+
+/*
+ * Hot add request message. Message sent from the host to the guest.
+ *
+ * mem_range: Memory range to hot add.
+ *
+ * On Linux we currently don't support this since we cannot hot add
+ * arbitrary granularity of memory.
+ */
+
+struct dm_hot_add {
+ struct dm_header hdr;
+ union dm_mem_page_range range;
+} __packed;
+
+/*
+ * Hot add response message.
+ * This message is sent by the guest to report the status of a hot add request.
+ * If page_count is less than the requested page count, then the host should
+ * assume all further hot add requests will fail, since this indicates that
+ * the guest has hit an upper physical memory barrier.
+ *
+ * Hot adds may also fail due to low resources; in this case, the guest must
+ * not complete this message until the hot add can succeed, and the host must
+ * not send a new hot add request until the response is sent.
+ * If VSC fails to hot add memory DYNMEM_NUMBER_OF_UNSUCCESSFUL_HOTADD_ATTEMPTS
+ * times it fails the request.
+ *
+ *
+ * page_count: number of pages that were successfully hot added.
+ *
+ * result: result of the operation 1: success, 0: failure.
+ *
+ */
+
+struct dm_hot_add_response {
+ struct dm_header hdr;
+ __u32 page_count;
+ __u32 result;
+} __packed;
+
+/*
+ * Types of information sent from host to the guest.
+ */
+
+enum dm_info_type {
+ INFO_TYPE_MAX_PAGE_CNT = 0,
+ MAX_INFO_TYPE
+};
+
+
+/*
+ * Header for the information message.
+ */
+
+struct dm_info_header {
+ enum dm_info_type type;
+ __u32 data_size;
+} __packed;
+
+/*
+ * This message is sent from the host to the guest to pass
+ * some relevant information (win8 addition).
+ *
+ * reserved: no used.
+ * info_size: size of the information blob.
+ * info: information blob.
+ */
+
+struct dm_info_msg {
+ struct dm_info_header header;
+ __u32 reserved;
+ __u32 info_size;
+ __u8 info[];
+};
+
+/*
+ * End protocol definitions.
+ */
+
+static bool hot_add;
+static bool do_hot_add;
+
+module_param(hot_add, bool, (S_IRUGO | S_IWUSR));
+MODULE_PARM_DESC(hot_add, "If set attempt memory hot_add");
+
+static atomic_t trans_id = ATOMIC_INIT(0);
+
+static int dm_ring_size = (5 * PAGE_SIZE);
+
+/*
+ * Driver specific state.
+ */
+
+enum hv_dm_state {
+ DM_INITIALIZING = 0,
+ DM_INITIALIZED,
+ DM_BALLOON_UP,
+ DM_BALLOON_DOWN,
+ DM_HOT_ADD,
+ DM_INIT_ERROR
+};
+
+
+static __u8 recv_buffer[PAGE_SIZE];
+static __u8 *send_buffer;
+#define PAGES_IN_2M 512
+
+struct hv_dynmem_device {
+ struct hv_device *dev;
+ enum hv_dm_state state;
+ struct completion host_event;
+ struct completion config_event;
+
+ /*
+ * Number of pages we have currently ballooned out.
+ */
+ unsigned int num_pages_ballooned;
+
+ /*
+ * This thread handles both balloon/hot-add
+ * requests from the host as well as notifying
+ * the host with regards to memory pressure in
+ * the guest.
+ */
+ struct task_struct *thread;
+
+ /*
+ * We start with the highest version we can support
+ * and downgrade based on the host; we save here the
+ * next version to try.
+ */
+ __u32 next_version;
+};
+
+static struct hv_dynmem_device dm_device;
+
+static void hot_add_req(struct hv_dynmem_device *dm, struct dm_hot_add *msg)
+{
+
+ struct dm_hot_add_response resp;
+
+ if (do_hot_add) {
+
+ pr_info("Memory hot add not supported\n");
+
+ /*
+ * Currently we do not support hot add.
+ * Just fail the request.
+ */
+ }
+
+ memset(&resp, 0, sizeof(struct dm_hot_add_response));
+ resp.hdr.type = DM_MEM_HOT_ADD_RESPONSE;
+ resp.hdr.size = sizeof(struct dm_hot_add_response);
+ resp.hdr.trans_id = atomic_inc_return(&trans_id);
+
+ resp.page_count = 0;
+ resp.result = 0;
+
+ dm->state = DM_INITIALIZED;
+ vmbus_sendpacket(dm->dev->channel, &resp,
+ sizeof(struct dm_hot_add_response),
+ (unsigned long)NULL,
+ VM_PKT_DATA_INBAND, 0);
+
+}
+
+static void process_info(struct hv_dynmem_device *dm, struct dm_info_msg *msg)
+{
+ switch (msg->header.type) {
+ case INFO_TYPE_MAX_PAGE_CNT:
+ pr_info("Received INFO_TYPE_MAX_PAGE_CNT\n");
+ pr_info("Data Size is %d\n", msg->header.data_size);
+ break;
+ default:
+ pr_info("Received Unknown type: %d\n", msg->header.type);
+ }
+}
+
+/*
+ * Post our status as it relates memory pressure to the
+ * host. Host expects the guests to post this status
+ * periodically at 1 second intervals.
+ *
+ * The metrics specified in this protocol are very Windows
+ * specific and so we cook up numbers here to convey our memory
+ * pressure.
+ */
+
+static void post_status(struct hv_dynmem_device *dm)
+{
+ struct dm_status status;
+
+
+ memset(&status, 0, sizeof(struct dm_status));
+ status.hdr.type = DM_STATUS_REPORT;
+ status.hdr.size = sizeof(struct dm_status);
+ status.hdr.trans_id = atomic_inc_return(&trans_id);
+
+
+ status.num_committed = vm_memory_committed();
+
+ vmbus_sendpacket(dm->dev->channel, &status,
+ sizeof(struct dm_status),
+ (unsigned long)NULL,
+ VM_PKT_DATA_INBAND, 0);
+
+}
+
+
+
+static void free_balloon_pages(struct hv_dynmem_device *dm,
+ union dm_mem_page_range *range_array)
+{
+ int num_pages = range_array->finfo.page_cnt;
+ __u64 start_frame = range_array->finfo.start_page;
+ struct page *pg;
+ int i;
+
+ for (i = 0; i < num_pages; i++) {
+ pg = pfn_to_page(i + start_frame);
+ __free_page(pg);
+ dm->num_pages_ballooned--;
+ }
+}
+
+
+
+static int alloc_balloon_pages(struct hv_dynmem_device *dm, int num_pages,
+ struct dm_balloon_response *bl_resp, int alloc_unit,
+ bool *alloc_error)
+{
+ int i = 0;
+ struct page *pg;
+
+ if (num_pages < alloc_unit)
+ return 0;
+
+ for (i = 0; (i * alloc_unit) < num_pages; i++) {
+ if (bl_resp->hdr.size + sizeof(union dm_mem_page_range) >
+ PAGE_SIZE)
+ return i * alloc_unit;
+
+ /*
+ * We execute this code in a thread context. Furthermore,
+ * we don't want the kernel to try too hard.
+ */
+ pg = alloc_pages(GFP_HIGHUSER | __GFP_NORETRY |
+ __GFP_NOMEMALLOC | __GFP_NOWARN,
+ get_order(alloc_unit << PAGE_SHIFT));
+
+ if (!pg) {
+ *alloc_error = true;
+ return i * alloc_unit;
+ }
+
+
+ dm->num_pages_ballooned += alloc_unit;
+
+ bl_resp->range_count++;
+ bl_resp->range_array[i].finfo.start_page =
+ page_to_pfn(pg);
+ bl_resp->range_array[i].finfo.page_cnt = alloc_unit;
+ bl_resp->hdr.size += sizeof(union dm_mem_page_range);
+
+ }
+
+ return num_pages;
+}
+
+
+
+static void balloon_up(struct hv_dynmem_device *dm, struct dm_balloon *req)
+{
+ int num_pages = req->num_pages;
+ int num_ballooned = 0;
+ struct dm_balloon_response *bl_resp;
+ int alloc_unit;
+ int ret;
+ bool alloc_error = false;
+ bool done = false;
+ int i;
+
+
+ /*
+ * Currently, we only support 4k allocations.
+ */
+ alloc_unit = 1;
+
+ while (!done) {
+ bl_resp = (struct dm_balloon_response *)send_buffer;
+ memset(send_buffer, 0, PAGE_SIZE);
+ bl_resp->hdr.type = DM_BALLOON_RESPONSE;
+ bl_resp->hdr.trans_id = atomic_inc_return(&trans_id);
+ bl_resp->hdr.size = sizeof(struct dm_balloon_response);
+ bl_resp->more_pages = 1;
+
+
+ num_pages -= num_ballooned;
+ num_ballooned = alloc_balloon_pages(dm, num_pages,
+ bl_resp, alloc_unit,
+ &alloc_error);
+
+ if ((alloc_error) || (num_ballooned == num_pages)) {
+ bl_resp->more_pages = 0;
+ done = true;
+ dm->state = DM_INITIALIZED;
+ }
+
+ /*
+ * We are pushing a lot of data through the channel;
+ * deal with transient failures caused because of the
+ * lack of space in the ring buffer.
+ */
+
+ do {
+ ret = vmbus_sendpacket(dm_device.dev->channel,
+ bl_resp,
+ bl_resp->hdr.size,
+ (unsigned long)NULL,
+ VM_PKT_DATA_INBAND, 0);
+
+ if (ret == -EAGAIN)
+ msleep(20);
+
+ } while (ret == -EAGAIN);
+
+ if (ret) {
+ /*
+ * Free up the memory we allocatted.
+ */
+ pr_info("Balloon response failed\n");
+
+ for (i = 0; i < bl_resp->range_count; i++)
+ free_balloon_pages(dm,
+ &bl_resp->range_array[i]);
+
+ done = true;
+ }
+ }
+
+}
+
+static void balloon_down(struct hv_dynmem_device *dm,
+ struct dm_unballoon_request *req)
+{
+ union dm_mem_page_range *range_array = req->range_array;
+ int range_count = req->range_count;
+ struct dm_unballoon_response resp;
+ int i;
+
+ for (i = 0; i < range_count; i++)
+ free_balloon_pages(dm, &range_array[i]);
+
+ if (req->more_pages == 1)
+ return;
+
+ memset(&resp, 0, sizeof(struct dm_unballoon_response));
+ resp.hdr.type = DM_UNBALLOON_RESPONSE;
+ resp.hdr.trans_id = atomic_inc_return(&trans_id);
+ resp.hdr.size = sizeof(struct dm_unballoon_response);
+
+ vmbus_sendpacket(dm_device.dev->channel, &resp,
+ sizeof(struct dm_unballoon_response),
+ (unsigned long)NULL,
+ VM_PKT_DATA_INBAND, 0);
+
+ dm->state = DM_INITIALIZED;
+}
+
+static void balloon_onchannelcallback(void *context);
+
+static int dm_thread_func(void *dm_dev)
+{
+ struct hv_dynmem_device *dm = dm_dev;
+ int t;
+ unsigned long scan_start;
+
+ while (!kthread_should_stop()) {
+ t = wait_for_completion_timeout(&dm_device.config_event, 1*HZ);
+ /*
+ * The host expects us to post information on the memory
+ * pressure every second.
+ */
+
+ if (t == 0)
+ post_status(dm);
+
+ scan_start = jiffies;
+ switch (dm->state) {
+ case DM_BALLOON_UP:
+ balloon_up(dm, (struct dm_balloon *)recv_buffer);
+ break;
+
+ case DM_HOT_ADD:
+ hot_add_req(dm, (struct dm_hot_add *)recv_buffer);
+ break;
+ default:
+ break;
+ }
+
+ if (!time_in_range(jiffies, scan_start, scan_start + HZ))
+ post_status(dm);
+
+ }
+
+ return 0;
+}
+
+
+static void version_resp(struct hv_dynmem_device *dm,
+ struct dm_version_response *vresp)
+{
+ struct dm_version_request version_req;
+ int ret;
+
+ if (vresp->is_accepted) {
+ /*
+ * We are done; wakeup the
+ * context waiting for version
+ * negotiation.
+ */
+ complete(&dm->host_event);
+ return;
+ }
+ /*
+ * If there are more versions to try, continue
+ * with negotiations; if not
+ * shutdown the service since we are not able
+ * to negotiate a suitable version number
+ * with the host.
+ */
+ if (dm->next_version == 0)
+ goto version_error;
+
+ dm->next_version = 0;
+ memset(&version_req, 0, sizeof(struct dm_version_request));
+ version_req.hdr.type = DM_VERSION_REQUEST;
+ version_req.hdr.size = sizeof(struct dm_version_request);
+ version_req.hdr.trans_id = atomic_inc_return(&trans_id);
+ version_req.version.version = DYNMEM_PROTOCOL_VERSION_WIN7;
+ version_req.is_last_attempt = 1;
+
+ ret = vmbus_sendpacket(dm->dev->channel, &version_req,
+ sizeof(struct dm_version_request),
+ (unsigned long)NULL,
+ VM_PKT_DATA_INBAND, 0);
+
+ if (ret)
+ goto version_error;
+
+ return;
+
+version_error:
+ dm->state = DM_INIT_ERROR;
+ complete(&dm->host_event);
+}
+
+static void cap_resp(struct hv_dynmem_device *dm,
+ struct dm_capabilities_resp_msg *cap_resp)
+{
+ if (!cap_resp->is_accepted) {
+ pr_info("Capabilities not accepted by host\n");
+ dm->state = DM_INIT_ERROR;
+ }
+ complete(&dm->host_event);
+}
+
+static void balloon_onchannelcallback(void *context)
+{
+ struct hv_device *dev = context;
+ u32 recvlen;
+ u64 requestid;
+ struct dm_message *dm_msg;
+ struct dm_header *dm_hdr;
+ struct hv_dynmem_device *dm = hv_get_drvdata(dev);
+
+ memset(recv_buffer, 0, sizeof(recv_buffer));
+ vmbus_recvpacket(dev->channel, recv_buffer,
+ PAGE_SIZE, &recvlen, &requestid);
+
+ if (recvlen > 0) {
+ dm_msg = (struct dm_message *)recv_buffer;
+ dm_hdr = &dm_msg->hdr;
+
+ switch (dm_hdr->type) {
+ case DM_VERSION_RESPONSE:
+ version_resp(dm,
+ (struct dm_version_response *)dm_msg);
+ break;
+
+ case DM_CAPABILITIES_RESPONSE:
+ cap_resp(dm,
+ (struct dm_capabilities_resp_msg *)dm_msg);
+ break;
+
+ case DM_BALLOON_REQUEST:
+ dm->state = DM_BALLOON_UP;
+ complete(&dm->config_event);
+ break;
+
+ case DM_UNBALLOON_REQUEST:
+ dm->state = DM_BALLOON_DOWN;
+ balloon_down(dm,
+ (struct dm_unballoon_request *)recv_buffer);
+ break;
+
+ case DM_MEM_HOT_ADD_REQUEST:
+ dm->state = DM_HOT_ADD;
+ complete(&dm->config_event);
+ break;
+
+ case DM_INFO_MESSAGE:
+ process_info(dm, (struct dm_info_msg *)dm_msg);
+ break;
+
+ default:
+ pr_err("Unhandled message: type: %d\n", dm_hdr->type);
+
+ }
+ }
+
+}
+
+static int balloon_probe(struct hv_device *dev,
+ const struct hv_vmbus_device_id *dev_id)
+{
+ int ret, t;
+ struct dm_version_request version_req;
+ struct dm_capabilities cap_msg;
+
+ do_hot_add = hot_add;
+
+ /*
+ * First allocate a send buffer.
+ */
+
+ send_buffer = kmalloc(PAGE_SIZE, GFP_KERNEL);
+ if (!send_buffer)
+ return -ENOMEM;
+
+ ret = vmbus_open(dev->channel, dm_ring_size, dm_ring_size, NULL, 0,
+ balloon_onchannelcallback, dev);
+
+ if (ret)
+ return ret;
+
+ dm_device.dev = dev;
+ dm_device.state = DM_INITIALIZING;
+ dm_device.next_version = DYNMEM_PROTOCOL_VERSION_WIN7;
+ init_completion(&dm_device.host_event);
+ init_completion(&dm_device.config_event);
+
+ dm_device.thread =
+ kthread_run(dm_thread_func, &dm_device, "hv_balloon");
+ if (IS_ERR(dm_device.thread)) {
+ ret = PTR_ERR(dm_device.thread);
+ goto probe_error0;
+ }
+
+ hv_set_drvdata(dev, &dm_device);
+ /*
+ * Initiate the hand shake with the host and negotiate
+ * a version that the host can support. We start with the
+ * highest version number and go down if the host cannot
+ * support it.
+ */
+ memset(&version_req, 0, sizeof(struct dm_version_request));
+ version_req.hdr.type = DM_VERSION_REQUEST;
+ version_req.hdr.size = sizeof(struct dm_version_request);
+ version_req.hdr.trans_id = atomic_inc_return(&trans_id);
+ version_req.version.version = DYNMEM_PROTOCOL_VERSION_WIN8;
+ version_req.is_last_attempt = 0;
+
+ ret = vmbus_sendpacket(dev->channel, &version_req,
+ sizeof(struct dm_version_request),
+ (unsigned long)NULL,
+ VM_PKT_DATA_INBAND,
+ VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED);
+ if (ret)
+ goto probe_error1;
+
+ t = wait_for_completion_timeout(&dm_device.host_event, 5*HZ);
+ if (t == 0) {
+ ret = -ETIMEDOUT;
+ goto probe_error1;
+ }
+
+ /*
+ * If we could not negotiate a compatible version with the host
+ * fail the probe function.
+ */
+ if (dm_device.state == DM_INIT_ERROR) {
+ ret = -ETIMEDOUT;
+ goto probe_error1;
+ }
+ /*
+ * Now submit our capabilities to the host.
+ */
+ memset(&cap_msg, 0, sizeof(struct dm_capabilities));
+ cap_msg.hdr.type = DM_CAPABILITIES_REPORT;
+ cap_msg.hdr.size = sizeof(struct dm_capabilities);
+ cap_msg.hdr.trans_id = atomic_inc_return(&trans_id);
+
+ cap_msg.caps.cap_bits.balloon = 1;
+ /*
+ * While we currently don't support hot-add,
+ * we still advertise this capability since the
+ * host requires that guests partcipating in the
+ * dynamic memory protocol support hot add.
+ */
+ cap_msg.caps.cap_bits.hot_add = 1;
+
+ /*
+ * Currently the host does not use these
+ * values and we set them to what is done in the
+ * Windows driver.
+ */
+ cap_msg.min_page_cnt = 0;
+ cap_msg.max_page_number = -1;
+
+ ret = vmbus_sendpacket(dev->channel, &cap_msg,
+ sizeof(struct dm_capabilities),
+ (unsigned long)NULL,
+ VM_PKT_DATA_INBAND,
+ VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED);
+ if (ret)
+ goto probe_error1;
+
+ t = wait_for_completion_timeout(&dm_device.host_event, 5*HZ);
+ if (t == 0) {
+ ret = -ETIMEDOUT;
+ goto probe_error1;
+ }
+
+ /*
+ * If the host does not like our capabilities,
+ * fail the probe function.
+ */
+ if (dm_device.state == DM_INIT_ERROR) {
+ ret = -ETIMEDOUT;
+ goto probe_error1;
+ }
+
+ dm_device.state = DM_INITIALIZED;
+
+ return 0;
+
+probe_error1:
+ kthread_stop(dm_device.thread);
+
+probe_error0:
+ vmbus_close(dev->channel);
+ return ret;
+}
+
+static int balloon_remove(struct hv_device *dev)
+{
+ struct hv_dynmem_device *dm = hv_get_drvdata(dev);
+
+ if (dm->num_pages_ballooned != 0)
+ pr_warn("Ballooned pages: %d\n", dm->num_pages_ballooned);
+
+ vmbus_close(dev->channel);
+ kthread_stop(dm->thread);
+
+ return 0;
+}
+
+static const struct hv_vmbus_device_id id_table[] = {
+ /* Dynamic Memory Class ID */
+ /* 525074DC-8985-46e2-8057-A307DC18A502 */
+ { VMBUS_DEVICE(0xdc, 0x74, 0x50, 0X52, 0x85, 0x89, 0xe2, 0x46,
+ 0x80, 0x57, 0xa3, 0x07, 0xdc, 0x18, 0xa5, 0x02)
+ },
+ { },
+};
+
+MODULE_DEVICE_TABLE(vmbus, id_table);
+
+static struct hv_driver balloon_drv = {
+ .name = "hv_balloon",
+ .id_table = id_table,
+ .probe = balloon_probe,
+ .remove = balloon_remove,
+};
+
+static int __init init_balloon_drv(void)
+{
+
+ return vmbus_driver_register(&balloon_drv);
+}
+
+static void exit_balloon_drv(void)
+{
+
+ vmbus_driver_unregister(&balloon_drv);
+}
+
+module_init(init_balloon_drv);
+module_exit(exit_balloon_drv);
+
+MODULE_DESCRIPTION("Hyper-V Balloon");
+MODULE_VERSION(HV_DRV_VERSION);
+MODULE_LICENSE("GPL");
diff --git a/drivers/hwmon/abituguru.c b/drivers/hwmon/abituguru.c
index 78b8179..6119ff8 100644
--- a/drivers/hwmon/abituguru.c
+++ b/drivers/hwmon/abituguru.c
@@ -478,7 +478,7 @@
* alarm for sensor type X and then enabling the sensor as sensor type
* X, if we then get an alarm it is a sensor of type X.
*/
-static int __devinit
+static int
abituguru_detect_bank1_sensor_type(struct abituguru_data *data,
u8 sensor_addr)
{
@@ -635,7 +635,7 @@
* read/write test would be feasible because of the reaction above, I've
* however opted to stay on the safe side.
*/
-static void __devinit
+static void
abituguru_detect_no_bank2_sensors(struct abituguru_data *data)
{
int i;
@@ -691,7 +691,7 @@
(int)data->bank2_sensors);
}
-static void __devinit
+static void
abituguru_detect_no_pwms(struct abituguru_data *data)
{
int i, j;
@@ -1264,7 +1264,7 @@
SENSOR_ATTR_2(name, 0444, show_name, NULL, 0, 0),
};
-static int __devinit abituguru_probe(struct platform_device *pdev)
+static int abituguru_probe(struct platform_device *pdev)
{
struct abituguru_data *data;
int i, j, used, sysfs_names_free, sysfs_attr_i, res = -ENODEV;
@@ -1434,7 +1434,7 @@
return res;
}
-static int __devexit abituguru_remove(struct platform_device *pdev)
+static int abituguru_remove(struct platform_device *pdev)
{
int i;
struct abituguru_data *data = platform_get_drvdata(pdev);
@@ -1545,7 +1545,7 @@
.pm = ABIT_UGURU_PM,
},
.probe = abituguru_probe,
- .remove = __devexit_p(abituguru_remove),
+ .remove = abituguru_remove,
};
static int __init abituguru_detect(void)
diff --git a/drivers/hwmon/abituguru3.c b/drivers/hwmon/abituguru3.c
index b174b8b..205327d 100644
--- a/drivers/hwmon/abituguru3.c
+++ b/drivers/hwmon/abituguru3.c
@@ -966,7 +966,7 @@
SENSOR_ATTR_2(name, 0444, show_name, NULL, 0, 0),
};
-static int __devinit abituguru3_probe(struct platform_device *pdev)
+static int abituguru3_probe(struct platform_device *pdev)
{
const int no_sysfs_attr[3] = { 10, 8, 7 };
int sensor_index[3] = { 0, 1, 1 };
@@ -1072,7 +1072,7 @@
return res;
}
-static int __devexit abituguru3_remove(struct platform_device *pdev)
+static int abituguru3_remove(struct platform_device *pdev)
{
int i;
struct abituguru3_data *data = platform_get_drvdata(pdev);
@@ -1171,7 +1171,7 @@
.pm = ABIT_UGURU3_PM
},
.probe = abituguru3_probe,
- .remove = __devexit_p(abituguru3_remove),
+ .remove = abituguru3_remove,
};
static int __init abituguru3_dmi_detect(void)
diff --git a/drivers/hwmon/ad7314.c b/drivers/hwmon/ad7314.c
index 37c01e7..a57584d 100644
--- a/drivers/hwmon/ad7314.c
+++ b/drivers/hwmon/ad7314.c
@@ -107,7 +107,7 @@
.attrs = ad7314_attributes,
};
-static int __devinit ad7314_probe(struct spi_device *spi_dev)
+static int ad7314_probe(struct spi_device *spi_dev)
{
int ret;
struct ad7314_data *chip;
@@ -135,7 +135,7 @@
return ret;
}
-static int __devexit ad7314_remove(struct spi_device *spi_dev)
+static int ad7314_remove(struct spi_device *spi_dev)
{
struct ad7314_data *chip = dev_get_drvdata(&spi_dev->dev);
@@ -159,7 +159,7 @@
.owner = THIS_MODULE,
},
.probe = ad7314_probe,
- .remove = __devexit_p(ad7314_remove),
+ .remove = ad7314_remove,
.id_table = ad7314_id,
};
diff --git a/drivers/hwmon/ad7414.c b/drivers/hwmon/ad7414.c
index b420fb3..f3a5d47 100644
--- a/drivers/hwmon/ad7414.c
+++ b/drivers/hwmon/ad7414.c
@@ -226,7 +226,7 @@
return err;
}
-static int __devexit ad7414_remove(struct i2c_client *client)
+static int ad7414_remove(struct i2c_client *client)
{
struct ad7414_data *data = i2c_get_clientdata(client);
@@ -246,7 +246,7 @@
.name = "ad7414",
},
.probe = ad7414_probe,
- .remove = __devexit_p(ad7414_remove),
+ .remove = ad7414_remove,
.id_table = ad7414_id,
};
diff --git a/drivers/hwmon/adcxx.c b/drivers/hwmon/adcxx.c
index f4c5867..751b1f0 100644
--- a/drivers/hwmon/adcxx.c
+++ b/drivers/hwmon/adcxx.c
@@ -161,7 +161,7 @@
/*----------------------------------------------------------------------*/
-static int __devinit adcxx_probe(struct spi_device *spi)
+static int adcxx_probe(struct spi_device *spi)
{
int channels = spi_get_device_id(spi)->driver_data;
struct adcxx *adc;
@@ -208,7 +208,7 @@
return status;
}
-static int __devexit adcxx_remove(struct spi_device *spi)
+static int adcxx_remove(struct spi_device *spi)
{
struct adcxx *adc = spi_get_drvdata(spi);
int i;
@@ -240,7 +240,7 @@
},
.id_table = adcxx_ids,
.probe = adcxx_probe,
- .remove = __devexit_p(adcxx_remove),
+ .remove = adcxx_remove,
};
module_spi_driver(adcxx_driver);
diff --git a/drivers/hwmon/ads7871.c b/drivers/hwmon/ads7871.c
index 1b53aa4..a798759 100644
--- a/drivers/hwmon/ads7871.c
+++ b/drivers/hwmon/ads7871.c
@@ -173,7 +173,7 @@
.attrs = ads7871_attributes,
};
-static int __devinit ads7871_probe(struct spi_device *spi)
+static int ads7871_probe(struct spi_device *spi)
{
int ret, err;
uint8_t val;
@@ -225,7 +225,7 @@
return err;
}
-static int __devexit ads7871_remove(struct spi_device *spi)
+static int ads7871_remove(struct spi_device *spi)
{
struct ads7871_data *pdata = spi_get_drvdata(spi);
@@ -241,7 +241,7 @@
},
.probe = ads7871_probe,
- .remove = __devexit_p(ads7871_remove),
+ .remove = ads7871_remove,
};
module_spi_driver(ads7871_driver);
diff --git a/drivers/hwmon/adt7411.c b/drivers/hwmon/adt7411.c
index 517f185..34ff03a 100644
--- a/drivers/hwmon/adt7411.c
+++ b/drivers/hwmon/adt7411.c
@@ -276,7 +276,7 @@
return 0;
}
-static int __devinit adt7411_probe(struct i2c_client *client,
+static int adt7411_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct adt7411_data *data;
@@ -317,7 +317,7 @@
return ret;
}
-static int __devexit adt7411_remove(struct i2c_client *client)
+static int adt7411_remove(struct i2c_client *client)
{
struct adt7411_data *data = i2c_get_clientdata(client);
@@ -337,7 +337,7 @@
.name = "adt7411",
},
.probe = adt7411_probe,
- .remove = __devexit_p(adt7411_remove),
+ .remove = adt7411_remove,
.id_table = adt7411_id,
.detect = adt7411_detect,
.address_list = normal_i2c,
diff --git a/drivers/hwmon/coretemp.c b/drivers/hwmon/coretemp.c
index 24426a7..d64923d 100644
--- a/drivers/hwmon/coretemp.c
+++ b/drivers/hwmon/coretemp.c
@@ -356,7 +356,7 @@
return adjust_tjmax(c, id, dev);
}
-static int __devinit create_name_attr(struct platform_data *pdata,
+static int create_name_attr(struct platform_data *pdata,
struct device *dev)
{
sysfs_attr_init(&pdata->name_attr.attr);
@@ -551,7 +551,7 @@
pdata->core_data[indx] = NULL;
}
-static int __devinit coretemp_probe(struct platform_device *pdev)
+static int coretemp_probe(struct platform_device *pdev)
{
struct platform_data *pdata;
int err;
@@ -584,7 +584,7 @@
return err;
}
-static int __devexit coretemp_remove(struct platform_device *pdev)
+static int coretemp_remove(struct platform_device *pdev)
{
struct platform_data *pdata = platform_get_drvdata(pdev);
int i;
@@ -606,7 +606,7 @@
.name = DRVNAME,
},
.probe = coretemp_probe,
- .remove = __devexit_p(coretemp_remove),
+ .remove = coretemp_remove,
};
static int __cpuinit coretemp_device_add(unsigned int cpu)
diff --git a/drivers/hwmon/da9052-hwmon.c b/drivers/hwmon/da9052-hwmon.c
index 1970494..ab4452c 100644
--- a/drivers/hwmon/da9052-hwmon.c
+++ b/drivers/hwmon/da9052-hwmon.c
@@ -270,7 +270,7 @@
static const struct attribute_group da9052_attr_group = {.attrs = da9052_attr};
-static int __devinit da9052_hwmon_probe(struct platform_device *pdev)
+static int da9052_hwmon_probe(struct platform_device *pdev)
{
struct da9052_hwmon *hwmon;
int ret;
@@ -303,7 +303,7 @@
return ret;
}
-static int __devexit da9052_hwmon_remove(struct platform_device *pdev)
+static int da9052_hwmon_remove(struct platform_device *pdev)
{
struct da9052_hwmon *hwmon = platform_get_drvdata(pdev);
@@ -315,7 +315,7 @@
static struct platform_driver da9052_hwmon_driver = {
.probe = da9052_hwmon_probe,
- .remove = __devexit_p(da9052_hwmon_remove),
+ .remove = da9052_hwmon_remove,
.driver = {
.name = "da9052-hwmon",
.owner = THIS_MODULE,
diff --git a/drivers/hwmon/dme1737.c b/drivers/hwmon/dme1737.c
index fe0eeec..7430f70 100644
--- a/drivers/hwmon/dme1737.c
+++ b/drivers/hwmon/dme1737.c
@@ -2630,7 +2630,7 @@
return err;
}
-static int __devinit dme1737_isa_probe(struct platform_device *pdev)
+static int dme1737_isa_probe(struct platform_device *pdev)
{
u8 company, device;
struct resource *res;
@@ -2718,7 +2718,7 @@
return err;
}
-static int __devexit dme1737_isa_remove(struct platform_device *pdev)
+static int dme1737_isa_remove(struct platform_device *pdev)
{
struct dme1737_data *data = platform_get_drvdata(pdev);
@@ -2734,7 +2734,7 @@
.name = "dme1737",
},
.probe = dme1737_isa_probe,
- .remove = __devexit_p(dme1737_isa_remove),
+ .remove = dme1737_isa_remove,
};
/* ---------------------------------------------------------------------
diff --git a/drivers/hwmon/f71805f.c b/drivers/hwmon/f71805f.c
index 4dd7723..a981697 100644
--- a/drivers/hwmon/f71805f.c
+++ b/drivers/hwmon/f71805f.c
@@ -1343,7 +1343,7 @@
* Device registration and initialization
*/
-static void __devinit f71805f_init_device(struct f71805f_data *data)
+static void f71805f_init_device(struct f71805f_data *data)
{
u8 reg;
int i;
@@ -1374,7 +1374,7 @@
}
}
-static int __devinit f71805f_probe(struct platform_device *pdev)
+static int f71805f_probe(struct platform_device *pdev)
{
struct f71805f_sio_data *sio_data = pdev->dev.platform_data;
struct f71805f_data *data;
@@ -1490,7 +1490,7 @@
return err;
}
-static int __devexit f71805f_remove(struct platform_device *pdev)
+static int f71805f_remove(struct platform_device *pdev)
{
struct f71805f_data *data = platform_get_drvdata(pdev);
int i;
@@ -1510,7 +1510,7 @@
.name = DRVNAME,
},
.probe = f71805f_probe,
- .remove = __devexit_p(f71805f_remove),
+ .remove = f71805f_remove,
};
static int __init f71805f_device_add(unsigned short address,
diff --git a/drivers/hwmon/f71882fg.c b/drivers/hwmon/f71882fg.c
index 50e4ce2..bb7275c 100644
--- a/drivers/hwmon/f71882fg.c
+++ b/drivers/hwmon/f71882fg.c
@@ -364,7 +364,7 @@
static ssize_t show_name(struct device *dev, struct device_attribute *devattr,
char *buf);
-static int __devinit f71882fg_probe(struct platform_device *pdev);
+static int f71882fg_probe(struct platform_device *pdev);
static int f71882fg_remove(struct platform_device *pdev);
static struct platform_driver f71882fg_driver = {
@@ -2145,7 +2145,7 @@
return sprintf(buf, "%s\n", f71882fg_names[data->type]);
}
-static int __devinit f71882fg_create_sysfs_files(struct platform_device *pdev,
+static int f71882fg_create_sysfs_files(struct platform_device *pdev,
struct sensor_device_attribute_2 *attr, int count)
{
int err, i;
@@ -2167,7 +2167,7 @@
device_remove_file(&pdev->dev, &attr[i].dev_attr);
}
-static int __devinit f71882fg_create_fan_sysfs_files(
+static int f71882fg_create_fan_sysfs_files(
struct platform_device *pdev, int idx)
{
struct f71882fg_data *data = platform_get_drvdata(pdev);
@@ -2265,7 +2265,7 @@
return err;
}
-static int __devinit f71882fg_probe(struct platform_device *pdev)
+static int f71882fg_probe(struct platform_device *pdev)
{
struct f71882fg_data *data;
struct f71882fg_sio_data *sio_data = pdev->dev.platform_data;
diff --git a/drivers/hwmon/fam15h_power.c b/drivers/hwmon/fam15h_power.c
index 34ab2a8..b757088 100644
--- a/drivers/hwmon/fam15h_power.c
+++ b/drivers/hwmon/fam15h_power.c
@@ -114,7 +114,7 @@
.attrs = fam15h_power_attrs,
};
-static bool __devinit fam15h_power_is_internal_node0(struct pci_dev *f4)
+static bool fam15h_power_is_internal_node0(struct pci_dev *f4)
{
u32 val;
@@ -171,7 +171,7 @@
#define fam15h_power_resume NULL
#endif
-static void __devinit fam15h_power_init_data(struct pci_dev *f4,
+static void fam15h_power_init_data(struct pci_dev *f4,
struct fam15h_power_data *data)
{
u32 val;
@@ -197,7 +197,7 @@
data->processor_pwr_watts = (tmp * 15625) >> 10;
}
-static int __devinit fam15h_power_probe(struct pci_dev *pdev,
+static int fam15h_power_probe(struct pci_dev *pdev,
const struct pci_device_id *id)
{
struct fam15h_power_data *data;
@@ -238,7 +238,7 @@
return err;
}
-static void __devexit fam15h_power_remove(struct pci_dev *pdev)
+static void fam15h_power_remove(struct pci_dev *pdev)
{
struct device *dev;
struct fam15h_power_data *data;
@@ -260,7 +260,7 @@
.name = "fam15h_power",
.id_table = fam15h_power_id_table,
.probe = fam15h_power_probe,
- .remove = __devexit_p(fam15h_power_remove),
+ .remove = fam15h_power_remove,
.resume = fam15h_power_resume,
};
diff --git a/drivers/hwmon/gpio-fan.c b/drivers/hwmon/gpio-fan.c
index 1381a2e..4e04c12 100644
--- a/drivers/hwmon/gpio-fan.c
+++ b/drivers/hwmon/gpio-fan.c
@@ -499,13 +499,13 @@
return 0;
}
-static struct of_device_id of_gpio_fan_match[] __devinitdata = {
+static struct of_device_id of_gpio_fan_match[] = {
{ .compatible = "gpio-fan", },
{},
};
#endif /* CONFIG_OF_GPIO */
-static int __devinit gpio_fan_probe(struct platform_device *pdev)
+static int gpio_fan_probe(struct platform_device *pdev)
{
int err;
struct gpio_fan_data *fan_data;
@@ -581,7 +581,7 @@
return err;
}
-static int __devexit gpio_fan_remove(struct platform_device *pdev)
+static int gpio_fan_remove(struct platform_device *pdev)
{
struct gpio_fan_data *fan_data = platform_get_drvdata(pdev);
@@ -626,7 +626,7 @@
static struct platform_driver gpio_fan_driver = {
.probe = gpio_fan_probe,
- .remove = __devexit_p(gpio_fan_remove),
+ .remove = gpio_fan_remove,
.driver = {
.name = "gpio-fan",
.pm = GPIO_FAN_PM,
diff --git a/drivers/hwmon/hih6130.c b/drivers/hwmon/hih6130.c
index 9a675ef..2dc37c7 100644
--- a/drivers/hwmon/hih6130.c
+++ b/drivers/hwmon/hih6130.c
@@ -220,7 +220,7 @@
* device's name.
* Returns 0 on success.
*/
-static int __devinit hih6130_probe(struct i2c_client *client,
+static int hih6130_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct hih6130 *hih6130;
@@ -263,7 +263,7 @@
* hih6130_remove() - remove device
* @client: I2C client device
*/
-static int __devexit hih6130_remove(struct i2c_client *client)
+static int hih6130_remove(struct i2c_client *client)
{
struct hih6130 *hih6130 = i2c_get_clientdata(client);
@@ -283,7 +283,7 @@
static struct i2c_driver hih6130_driver = {
.driver.name = "hih6130",
.probe = hih6130_probe,
- .remove = __devexit_p(hih6130_remove),
+ .remove = hih6130_remove,
.id_table = hih6130_id,
};
diff --git a/drivers/hwmon/i5k_amb.c b/drivers/hwmon/i5k_amb.c
index 46141ab..b87c2cc 100644
--- a/drivers/hwmon/i5k_amb.c
+++ b/drivers/hwmon/i5k_amb.c
@@ -260,7 +260,7 @@
attr->index & DIMM_MASK);
}
-static int __devinit i5k_amb_hwmon_init(struct platform_device *pdev)
+static int i5k_amb_hwmon_init(struct platform_device *pdev)
{
int i, j, k, d = 0;
u16 c;
@@ -406,7 +406,7 @@
return res;
}
-static int __devinit i5k_amb_add(void)
+static int i5k_amb_add(void)
{
int res = -ENODEV;
@@ -425,7 +425,7 @@
return res;
}
-static int __devinit i5k_find_amb_registers(struct i5k_amb_data *data,
+static int i5k_find_amb_registers(struct i5k_amb_data *data,
unsigned long devid)
{
struct pci_dev *pcidev;
@@ -459,7 +459,7 @@
return res;
}
-static int __devinit i5k_channel_probe(u16 *amb_present, unsigned long dev_id)
+static int i5k_channel_probe(u16 *amb_present, unsigned long dev_id)
{
struct pci_dev *pcidev;
u16 val16;
@@ -488,14 +488,14 @@
static struct {
unsigned long err;
unsigned long fbd0;
-} chipset_ids[] __devinitdata = {
+} chipset_ids[] = {
{ PCI_DEVICE_ID_INTEL_5000_ERR, PCI_DEVICE_ID_INTEL_5000_FBD0 },
{ PCI_DEVICE_ID_INTEL_5400_ERR, PCI_DEVICE_ID_INTEL_5400_FBD0 },
{ 0, 0 }
};
#ifdef MODULE
-static struct pci_device_id i5k_amb_ids[] __devinitdata = {
+static struct pci_device_id i5k_amb_ids[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_5000_ERR) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_5400_ERR) },
{ 0, }
@@ -503,7 +503,7 @@
MODULE_DEVICE_TABLE(pci, i5k_amb_ids);
#endif
-static int __devinit i5k_amb_probe(struct platform_device *pdev)
+static int i5k_amb_probe(struct platform_device *pdev)
{
struct i5k_amb_data *data;
struct resource *reso;
@@ -564,7 +564,7 @@
return res;
}
-static int __devexit i5k_amb_remove(struct platform_device *pdev)
+static int i5k_amb_remove(struct platform_device *pdev)
{
int i;
struct i5k_amb_data *data = platform_get_drvdata(pdev);
@@ -587,7 +587,7 @@
.name = DRVNAME,
},
.probe = i5k_amb_probe,
- .remove = __devexit_p(i5k_amb_remove),
+ .remove = i5k_amb_remove,
};
static int __init i5k_amb_init(void)
diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c
index f1de397..d32aa35 100644
--- a/drivers/hwmon/it87.c
+++ b/drivers/hwmon/it87.c
@@ -428,7 +428,7 @@
}
static int it87_probe(struct platform_device *pdev);
-static int __devexit it87_remove(struct platform_device *pdev);
+static int it87_remove(struct platform_device *pdev);
static int it87_read_value(struct it87_data *data, u8 reg);
static void it87_write_value(struct it87_data *data, u8 reg, u8 value);
@@ -443,7 +443,7 @@
.name = DRVNAME,
},
.probe = it87_probe,
- .remove = __devexit_p(it87_remove),
+ .remove = it87_remove,
};
static ssize_t show_in(struct device *dev, struct device_attribute *attr,
@@ -1966,7 +1966,7 @@
sysfs_remove_group(&dev->kobj, &it87_group_label);
}
-static int __devinit it87_probe(struct platform_device *pdev)
+static int it87_probe(struct platform_device *pdev)
{
struct it87_data *data;
struct resource *res;
@@ -2158,7 +2158,7 @@
return err;
}
-static int __devexit it87_remove(struct platform_device *pdev)
+static int it87_remove(struct platform_device *pdev)
{
struct it87_data *data = platform_get_drvdata(pdev);
@@ -2191,7 +2191,7 @@
}
/* Return 1 if and only if the PWM interface is safe to use */
-static int __devinit it87_check_pwm(struct device *dev)
+static int it87_check_pwm(struct device *dev)
{
struct it87_data *data = dev_get_drvdata(dev);
/*
@@ -2248,7 +2248,7 @@
}
/* Called when we have found a new IT87. */
-static void __devinit it87_init_device(struct platform_device *pdev)
+static void it87_init_device(struct platform_device *pdev)
{
struct it87_sio_data *sio_data = pdev->dev.platform_data;
struct it87_data *data = platform_get_drvdata(pdev);
diff --git a/drivers/hwmon/jz4740-hwmon.c b/drivers/hwmon/jz4740-hwmon.c
index dee9eec..e0d66b9 100644
--- a/drivers/hwmon/jz4740-hwmon.c
+++ b/drivers/hwmon/jz4740-hwmon.c
@@ -102,7 +102,7 @@
.attrs = jz4740_hwmon_attributes,
};
-static int __devinit jz4740_hwmon_probe(struct platform_device *pdev)
+static int jz4740_hwmon_probe(struct platform_device *pdev)
{
int ret;
struct jz4740_hwmon *hwmon;
@@ -172,7 +172,7 @@
return ret;
}
-static int __devexit jz4740_hwmon_remove(struct platform_device *pdev)
+static int jz4740_hwmon_remove(struct platform_device *pdev)
{
struct jz4740_hwmon *hwmon = platform_get_drvdata(pdev);
@@ -184,7 +184,7 @@
static struct platform_driver jz4740_hwmon_driver = {
.probe = jz4740_hwmon_probe,
- .remove = __devexit_p(jz4740_hwmon_remove),
+ .remove = jz4740_hwmon_remove,
.driver = {
.name = "jz4740-hwmon",
.owner = THIS_MODULE,
diff --git a/drivers/hwmon/k10temp.c b/drivers/hwmon/k10temp.c
index f2fe807..e3b037c 100644
--- a/drivers/hwmon/k10temp.c
+++ b/drivers/hwmon/k10temp.c
@@ -95,7 +95,7 @@
static SENSOR_DEVICE_ATTR(temp1_crit_hyst, S_IRUGO, show_temp_crit, NULL, 1);
static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
-static bool __devinit has_erratum_319(struct pci_dev *pdev)
+static bool has_erratum_319(struct pci_dev *pdev)
{
u32 pkg_type, reg_dram_cfg;
@@ -129,7 +129,7 @@
(boot_cpu_data.x86_model == 4 && boot_cpu_data.x86_mask <= 2);
}
-static int __devinit k10temp_probe(struct pci_dev *pdev,
+static int k10temp_probe(struct pci_dev *pdev,
const struct pci_device_id *id)
{
struct device *hwmon_dev;
@@ -192,7 +192,7 @@
return err;
}
-static void __devexit k10temp_remove(struct pci_dev *pdev)
+static void k10temp_remove(struct pci_dev *pdev)
{
hwmon_device_unregister(pci_get_drvdata(pdev));
device_remove_file(&pdev->dev, &dev_attr_name);
@@ -219,7 +219,7 @@
.name = "k10temp",
.id_table = k10temp_id_table,
.probe = k10temp_probe,
- .remove = __devexit_p(k10temp_remove),
+ .remove = k10temp_remove,
};
module_pci_driver(k10temp_driver);
diff --git a/drivers/hwmon/k8temp.c b/drivers/hwmon/k8temp.c
index e8c7fb0..9f3c0ae 100644
--- a/drivers/hwmon/k8temp.c
+++ b/drivers/hwmon/k8temp.c
@@ -142,7 +142,7 @@
MODULE_DEVICE_TABLE(pci, k8temp_ids);
-static int __devinit is_rev_g_desktop(u8 model)
+static int is_rev_g_desktop(u8 model)
{
u32 brandidx;
@@ -173,7 +173,7 @@
return 1;
}
-static int __devinit k8temp_probe(struct pci_dev *pdev,
+static int k8temp_probe(struct pci_dev *pdev,
const struct pci_device_id *id)
{
int err;
@@ -304,7 +304,7 @@
return err;
}
-static void __devexit k8temp_remove(struct pci_dev *pdev)
+static void k8temp_remove(struct pci_dev *pdev)
{
struct k8temp_data *data = pci_get_drvdata(pdev);
@@ -324,7 +324,7 @@
.name = "k8temp",
.id_table = k8temp_ids,
.probe = k8temp_probe,
- .remove = __devexit_p(k8temp_remove),
+ .remove = k8temp_remove,
};
module_pci_driver(k8temp_driver);
diff --git a/drivers/hwmon/lm70.c b/drivers/hwmon/lm70.c
index 2d1777a..016efa2 100644
--- a/drivers/hwmon/lm70.c
+++ b/drivers/hwmon/lm70.c
@@ -131,7 +131,7 @@
/*----------------------------------------------------------------------*/
-static int __devinit lm70_probe(struct spi_device *spi)
+static int lm70_probe(struct spi_device *spi)
{
int chip = spi_get_device_id(spi)->driver_data;
struct lm70 *p_lm70;
@@ -178,7 +178,7 @@
return status;
}
-static int __devexit lm70_remove(struct spi_device *spi)
+static int lm70_remove(struct spi_device *spi)
{
struct lm70 *p_lm70 = spi_get_drvdata(spi);
@@ -207,7 +207,7 @@
},
.id_table = lm70_ids,
.probe = lm70_probe,
- .remove = __devexit_p(lm70_remove),
+ .remove = lm70_remove,
};
module_spi_driver(lm70_driver);
diff --git a/drivers/hwmon/lm78.c b/drivers/hwmon/lm78.c
index c6ffafe..53d6ee8 100644
--- a/drivers/hwmon/lm78.c
+++ b/drivers/hwmon/lm78.c
@@ -833,7 +833,7 @@
}
#ifdef CONFIG_ISA
-static int __devinit lm78_isa_probe(struct platform_device *pdev)
+static int lm78_isa_probe(struct platform_device *pdev)
{
int err;
struct lm78_data *data;
@@ -886,7 +886,7 @@
return err;
}
-static int __devexit lm78_isa_remove(struct platform_device *pdev)
+static int lm78_isa_remove(struct platform_device *pdev)
{
struct lm78_data *data = platform_get_drvdata(pdev);
@@ -903,7 +903,7 @@
.name = "lm78",
},
.probe = lm78_isa_probe,
- .remove = __devexit_p(lm78_isa_remove),
+ .remove = lm78_isa_remove,
};
/* return 1 if a supported chip is found, 0 otherwise */
diff --git a/drivers/hwmon/max1111.c b/drivers/hwmon/max1111.c
index b4eb088..eda077d 100644
--- a/drivers/hwmon/max1111.c
+++ b/drivers/hwmon/max1111.c
@@ -157,7 +157,7 @@
.attrs = max1110_attributes,
};
-static int __devinit setup_transfer(struct max1111_data *data)
+static int setup_transfer(struct max1111_data *data)
{
struct spi_message *m;
struct spi_transfer *x;
@@ -179,7 +179,7 @@
return 0;
}
-static int __devinit max1111_probe(struct spi_device *spi)
+static int max1111_probe(struct spi_device *spi)
{
enum chips chip = spi_get_device_id(spi)->driver_data;
struct max1111_data *data;
@@ -256,7 +256,7 @@
return err;
}
-static int __devexit max1111_remove(struct spi_device *spi)
+static int max1111_remove(struct spi_device *spi)
{
struct max1111_data *data = spi_get_drvdata(spi);
@@ -283,7 +283,7 @@
},
.id_table = max1111_ids,
.probe = max1111_probe,
- .remove = __devexit_p(max1111_remove),
+ .remove = max1111_remove,
};
module_spi_driver(max1111_driver);
diff --git a/drivers/hwmon/max197.c b/drivers/hwmon/max197.c
index 6304f26..b5ebb91 100644
--- a/drivers/hwmon/max197.c
+++ b/drivers/hwmon/max197.c
@@ -257,7 +257,7 @@
},
};
-static int __devinit max197_probe(struct platform_device *pdev)
+static int max197_probe(struct platform_device *pdev)
{
int ch, ret;
struct max197_data *data;
@@ -316,7 +316,7 @@
return ret;
}
-static int __devexit max197_remove(struct platform_device *pdev)
+static int max197_remove(struct platform_device *pdev)
{
struct max197_data *data = platform_get_drvdata(pdev);
@@ -339,7 +339,7 @@
.owner = THIS_MODULE,
},
.probe = max197_probe,
- .remove = __devexit_p(max197_remove),
+ .remove = max197_remove,
.id_table = max197_device_ids,
};
module_platform_driver(max197_driver);
diff --git a/drivers/hwmon/mc13783-adc.c b/drivers/hwmon/mc13783-adc.c
index cf47a59..2a7f331 100644
--- a/drivers/hwmon/mc13783-adc.c
+++ b/drivers/hwmon/mc13783-adc.c
@@ -233,7 +233,7 @@
return ret;
}
-static int __devexit mc13783_adc_remove(struct platform_device *pdev)
+static int mc13783_adc_remove(struct platform_device *pdev)
{
struct mc13783_adc_priv *priv = platform_get_drvdata(pdev);
kernel_ulong_t driver_data = platform_get_device_id(pdev)->driver_data;
@@ -265,7 +265,7 @@
MODULE_DEVICE_TABLE(platform, mc13783_adc_idtable);
static struct platform_driver mc13783_adc_driver = {
- .remove = __devexit_p(mc13783_adc_remove),
+ .remove = mc13783_adc_remove,
.driver = {
.owner = THIS_MODULE,
.name = DRIVER_NAME,
diff --git a/drivers/hwmon/ntc_thermistor.c b/drivers/hwmon/ntc_thermistor.c
index 74a6c58..a87eb89 100644
--- a/drivers/hwmon/ntc_thermistor.c
+++ b/drivers/hwmon/ntc_thermistor.c
@@ -309,7 +309,7 @@
.attrs = ntc_attributes,
};
-static int __devinit ntc_thermistor_probe(struct platform_device *pdev)
+static int ntc_thermistor_probe(struct platform_device *pdev)
{
struct ntc_data *data;
struct ntc_thermistor_platform_data *pdata = pdev->dev.platform_data;
@@ -393,7 +393,7 @@
return ret;
}
-static int __devexit ntc_thermistor_remove(struct platform_device *pdev)
+static int ntc_thermistor_remove(struct platform_device *pdev)
{
struct ntc_data *data = platform_get_drvdata(pdev);
@@ -419,7 +419,7 @@
.owner = THIS_MODULE,
},
.probe = ntc_thermistor_probe,
- .remove = __devexit_p(ntc_thermistor_remove),
+ .remove = ntc_thermistor_remove,
.id_table = ntc_thermistor_id,
};
diff --git a/drivers/hwmon/pc87360.c b/drivers/hwmon/pc87360.c
index 91d5b2a..e35856b 100644
--- a/drivers/hwmon/pc87360.c
+++ b/drivers/hwmon/pc87360.c
@@ -228,7 +228,7 @@
*/
static int pc87360_probe(struct platform_device *pdev);
-static int __devexit pc87360_remove(struct platform_device *pdev);
+static int pc87360_remove(struct platform_device *pdev);
static int pc87360_read_value(struct pc87360_data *data, u8 ldi, u8 bank,
u8 reg);
@@ -248,7 +248,7 @@
.name = "pc87360",
},
.probe = pc87360_probe,
- .remove = __devexit_p(pc87360_remove),
+ .remove = pc87360_remove,
};
/*
@@ -1221,7 +1221,7 @@
sysfs_remove_group(&dev->kobj, &pc8736x_vin_group);
}
-static int __devinit pc87360_probe(struct platform_device *pdev)
+static int pc87360_probe(struct platform_device *pdev)
{
int i;
struct pc87360_data *data;
@@ -1375,7 +1375,7 @@
return err;
}
-static int __devexit pc87360_remove(struct platform_device *pdev)
+static int pc87360_remove(struct platform_device *pdev)
{
struct pc87360_data *data = platform_get_drvdata(pdev);
diff --git a/drivers/hwmon/pc87427.c b/drivers/hwmon/pc87427.c
index f185b1f..6086ad0 100644
--- a/drivers/hwmon/pc87427.c
+++ b/drivers/hwmon/pc87427.c
@@ -956,7 +956,7 @@
* Device detection, attach and detach
*/
-static int __devinit pc87427_request_regions(struct platform_device *pdev,
+static int pc87427_request_regions(struct platform_device *pdev,
int count)
{
struct resource *res;
@@ -980,7 +980,7 @@
return 0;
}
-static void __devinit pc87427_init_device(struct device *dev)
+static void pc87427_init_device(struct device *dev)
{
struct pc87427_sio_data *sio_data = dev->platform_data;
struct pc87427_data *data = dev_get_drvdata(dev);
@@ -1072,7 +1072,7 @@
}
}
-static int __devinit pc87427_probe(struct platform_device *pdev)
+static int pc87427_probe(struct platform_device *pdev)
{
struct pc87427_sio_data *sio_data = pdev->dev.platform_data;
struct pc87427_data *data;
@@ -1141,7 +1141,7 @@
return err;
}
-static int __devexit pc87427_remove(struct platform_device *pdev)
+static int pc87427_remove(struct platform_device *pdev)
{
struct pc87427_data *data = platform_get_drvdata(pdev);
@@ -1158,7 +1158,7 @@
.name = DRVNAME,
},
.probe = pc87427_probe,
- .remove = __devexit_p(pc87427_remove),
+ .remove = pc87427_remove,
};
static int __init pc87427_device_add(const struct pc87427_sio_data *sio_data)
diff --git a/drivers/hwmon/s3c-hwmon.c b/drivers/hwmon/s3c-hwmon.c
index bcecd02..ff2ae02 100644
--- a/drivers/hwmon/s3c-hwmon.c
+++ b/drivers/hwmon/s3c-hwmon.c
@@ -275,7 +275,7 @@
* s3c_hwmon_probe - device probe entry.
* @dev: The device being probed.
*/
-static int __devinit s3c_hwmon_probe(struct platform_device *dev)
+static int s3c_hwmon_probe(struct platform_device *dev)
{
struct s3c_hwmon_pdata *pdata = dev->dev.platform_data;
struct s3c_hwmon *hwmon;
@@ -364,7 +364,7 @@
return ret;
}
-static int __devexit s3c_hwmon_remove(struct platform_device *dev)
+static int s3c_hwmon_remove(struct platform_device *dev)
{
struct s3c_hwmon *hwmon = platform_get_drvdata(dev);
int i;
@@ -386,7 +386,7 @@
.owner = THIS_MODULE,
},
.probe = s3c_hwmon_probe,
- .remove = __devexit_p(s3c_hwmon_remove),
+ .remove = s3c_hwmon_remove,
};
module_platform_driver(s3c_hwmon_driver);
diff --git a/drivers/hwmon/sch5627.c b/drivers/hwmon/sch5627.c
index 49f6230..0cc99fd 100644
--- a/drivers/hwmon/sch5627.c
+++ b/drivers/hwmon/sch5627.c
@@ -153,7 +153,7 @@
return ret;
}
-static int __devinit sch5627_read_limits(struct sch5627_data *data)
+static int sch5627_read_limits(struct sch5627_data *data)
{
int i, val;
@@ -465,7 +465,7 @@
return 0;
}
-static int __devinit sch5627_probe(struct platform_device *pdev)
+static int sch5627_probe(struct platform_device *pdev)
{
struct sch5627_data *data;
int err, build_code, build_id, hwmon_rev, val;
diff --git a/drivers/hwmon/sch5636.c b/drivers/hwmon/sch5636.c
index 5171180..547b5c9 100644
--- a/drivers/hwmon/sch5636.c
+++ b/drivers/hwmon/sch5636.c
@@ -405,7 +405,7 @@
return 0;
}
-static int __devinit sch5636_probe(struct platform_device *pdev)
+static int sch5636_probe(struct platform_device *pdev)
{
struct sch5636_data *data;
int i, err, val, revision[2];
diff --git a/drivers/hwmon/sht15.c b/drivers/hwmon/sht15.c
index 07a0c1a..1c85d39 100644
--- a/drivers/hwmon/sht15.c
+++ b/drivers/hwmon/sht15.c
@@ -884,7 +884,7 @@
return NOTIFY_OK;
}
-static int __devinit sht15_probe(struct platform_device *pdev)
+static int sht15_probe(struct platform_device *pdev)
{
int ret;
struct sht15_data *data;
@@ -1002,7 +1002,7 @@
return ret;
}
-static int __devexit sht15_remove(struct platform_device *pdev)
+static int sht15_remove(struct platform_device *pdev)
{
struct sht15_data *data = platform_get_drvdata(pdev);
@@ -1043,7 +1043,7 @@
.owner = THIS_MODULE,
},
.probe = sht15_probe,
- .remove = __devexit_p(sht15_remove),
+ .remove = sht15_remove,
.id_table = sht15_device_ids,
};
module_platform_driver(sht15_driver);
diff --git a/drivers/hwmon/sht21.c b/drivers/hwmon/sht21.c
index 5f67546..2e9f957 100644
--- a/drivers/hwmon/sht21.c
+++ b/drivers/hwmon/sht21.c
@@ -187,7 +187,7 @@
* device's name.
* Returns 0 on success.
*/
-static int __devinit sht21_probe(struct i2c_client *client,
+static int sht21_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct sht21 *sht21;
@@ -233,7 +233,7 @@
* sht21_remove() - remove device
* @client: I2C client device
*/
-static int __devexit sht21_remove(struct i2c_client *client)
+static int sht21_remove(struct i2c_client *client)
{
struct sht21 *sht21 = i2c_get_clientdata(client);
@@ -253,7 +253,7 @@
static struct i2c_driver sht21_driver = {
.driver.name = "sht21",
.probe = sht21_probe,
- .remove = __devexit_p(sht21_remove),
+ .remove = sht21_remove,
.id_table = sht21_id,
};
diff --git a/drivers/hwmon/sis5595.c b/drivers/hwmon/sis5595.c
index 8275f0e1..06ce3c9 100644
--- a/drivers/hwmon/sis5595.c
+++ b/drivers/hwmon/sis5595.c
@@ -204,7 +204,7 @@
static struct pci_dev *s_bridge; /* pointer to the (only) sis5595 */
static int sis5595_probe(struct platform_device *pdev);
-static int __devexit sis5595_remove(struct platform_device *pdev);
+static int sis5595_remove(struct platform_device *pdev);
static int sis5595_read_value(struct sis5595_data *data, u8 reg);
static void sis5595_write_value(struct sis5595_data *data, u8 reg, u8 value);
@@ -217,7 +217,7 @@
.name = "sis5595",
},
.probe = sis5595_probe,
- .remove = __devexit_p(sis5595_remove),
+ .remove = sis5595_remove,
};
/* 4 Voltages */
@@ -583,7 +583,7 @@
};
/* This is called when the module is loaded */
-static int __devinit sis5595_probe(struct platform_device *pdev)
+static int sis5595_probe(struct platform_device *pdev)
{
int err = 0;
int i;
@@ -659,7 +659,7 @@
return err;
}
-static int __devexit sis5595_remove(struct platform_device *pdev)
+static int sis5595_remove(struct platform_device *pdev)
{
struct sis5595_data *data = platform_get_drvdata(pdev);
@@ -693,7 +693,7 @@
}
/* Called when we have found a new SIS5595. */
-static void __devinit sis5595_init_device(struct sis5595_data *data)
+static void sis5595_init_device(struct sis5595_data *data)
{
u8 config = sis5595_read_value(data, SIS5595_REG_CONFIG);
if (!(config & 0x01))
@@ -758,7 +758,7 @@
MODULE_DEVICE_TABLE(pci, sis5595_pci_ids);
-static int blacklist[] __devinitdata = {
+static int blacklist[] = {
PCI_DEVICE_ID_SI_540,
PCI_DEVICE_ID_SI_550,
PCI_DEVICE_ID_SI_630,
@@ -774,7 +774,7 @@
PCI_DEVICE_ID_SI_5598,
0 };
-static int __devinit sis5595_device_add(unsigned short address)
+static int sis5595_device_add(unsigned short address)
{
struct resource res = {
.start = address,
@@ -815,7 +815,7 @@
return err;
}
-static int __devinit sis5595_pci_probe(struct pci_dev *dev,
+static int sis5595_pci_probe(struct pci_dev *dev,
const struct pci_device_id *id)
{
u16 address;
diff --git a/drivers/hwmon/smsc47b397.c b/drivers/hwmon/smsc47b397.c
index 65b07de..81348fa 100644
--- a/drivers/hwmon/smsc47b397.c
+++ b/drivers/hwmon/smsc47b397.c
@@ -228,7 +228,7 @@
.attrs = smsc47b397_attributes,
};
-static int __devexit smsc47b397_remove(struct platform_device *pdev)
+static int smsc47b397_remove(struct platform_device *pdev)
{
struct smsc47b397_data *data = platform_get_drvdata(pdev);
@@ -246,10 +246,10 @@
.name = DRVNAME,
},
.probe = smsc47b397_probe,
- .remove = __devexit_p(smsc47b397_remove),
+ .remove = smsc47b397_remove,
};
-static int __devinit smsc47b397_probe(struct platform_device *pdev)
+static int smsc47b397_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct smsc47b397_data *data;
diff --git a/drivers/hwmon/tmp102.c b/drivers/hwmon/tmp102.c
index b8777e5..b10c3d3 100644
--- a/drivers/hwmon/tmp102.c
+++ b/drivers/hwmon/tmp102.c
@@ -147,7 +147,7 @@
#define TMP102_CONFIG (TMP102_CONF_TM | TMP102_CONF_EM | TMP102_CONF_CR1)
#define TMP102_CONFIG_RD_ONLY (TMP102_CONF_R0 | TMP102_CONF_R1 | TMP102_CONF_AL)
-static int __devinit tmp102_probe(struct i2c_client *client,
+static int tmp102_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct tmp102 *tmp102;
@@ -216,7 +216,7 @@
return status;
}
-static int __devexit tmp102_remove(struct i2c_client *client)
+static int tmp102_remove(struct i2c_client *client)
{
struct tmp102 *tmp102 = i2c_get_clientdata(client);
@@ -283,7 +283,7 @@
.driver.name = DRIVER_NAME,
.driver.pm = TMP102_DEV_PM_OPS,
.probe = tmp102_probe,
- .remove = __devexit_p(tmp102_remove),
+ .remove = tmp102_remove,
.id_table = tmp102_id,
};
diff --git a/drivers/hwmon/twl4030-madc-hwmon.c b/drivers/hwmon/twl4030-madc-hwmon.c
index 1a174f0..149d44a 100644
--- a/drivers/hwmon/twl4030-madc-hwmon.c
+++ b/drivers/hwmon/twl4030-madc-hwmon.c
@@ -96,7 +96,7 @@
.attrs = twl4030_madc_attributes,
};
-static int __devinit twl4030_madc_hwmon_probe(struct platform_device *pdev)
+static int twl4030_madc_hwmon_probe(struct platform_device *pdev)
{
int ret;
struct device *hwmon;
@@ -120,7 +120,7 @@
return ret;
}
-static int __devexit twl4030_madc_hwmon_remove(struct platform_device *pdev)
+static int twl4030_madc_hwmon_remove(struct platform_device *pdev)
{
hwmon_device_unregister(&pdev->dev);
sysfs_remove_group(&pdev->dev.kobj, &twl4030_madc_group);
diff --git a/drivers/hwmon/ultra45_env.c b/drivers/hwmon/ultra45_env.c
index 44136bb..fb3e693 100644
--- a/drivers/hwmon/ultra45_env.c
+++ b/drivers/hwmon/ultra45_env.c
@@ -250,7 +250,7 @@
.attrs = env_attributes,
};
-static int __devinit env_probe(struct platform_device *op)
+static int env_probe(struct platform_device *op)
{
struct env *p = kzalloc(sizeof(*p), GFP_KERNEL);
int err = -ENOMEM;
@@ -291,7 +291,7 @@
goto out;
}
-static int __devexit env_remove(struct platform_device *op)
+static int env_remove(struct platform_device *op)
{
struct env *p = platform_get_drvdata(op);
@@ -321,7 +321,7 @@
.of_match_table = env_match,
},
.probe = env_probe,
- .remove = __devexit_p(env_remove),
+ .remove = env_remove,
};
module_platform_driver(env_driver);
diff --git a/drivers/hwmon/via-cputemp.c b/drivers/hwmon/via-cputemp.c
index 4cddee0..76f157b 100644
--- a/drivers/hwmon/via-cputemp.c
+++ b/drivers/hwmon/via-cputemp.c
@@ -121,7 +121,7 @@
/* Optional attributes */
static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_cpu_vid, NULL);
-static int __devinit via_cputemp_probe(struct platform_device *pdev)
+static int via_cputemp_probe(struct platform_device *pdev)
{
struct via_cputemp_data *data;
struct cpuinfo_x86 *c = &cpu_data(pdev->id);
@@ -192,7 +192,7 @@
return err;
}
-static int __devexit via_cputemp_remove(struct platform_device *pdev)
+static int via_cputemp_remove(struct platform_device *pdev)
{
struct via_cputemp_data *data = platform_get_drvdata(pdev);
@@ -209,7 +209,7 @@
.name = DRVNAME,
},
.probe = via_cputemp_probe,
- .remove = __devexit_p(via_cputemp_remove),
+ .remove = via_cputemp_remove,
};
struct pdev_entry {
diff --git a/drivers/hwmon/via686a.c b/drivers/hwmon/via686a.c
index 299399a..e0e14a9 100644
--- a/drivers/hwmon/via686a.c
+++ b/drivers/hwmon/via686a.c
@@ -339,7 +339,7 @@
static struct pci_dev *s_bridge; /* pointer to the (only) via686a */
static int via686a_probe(struct platform_device *pdev);
-static int __devexit via686a_remove(struct platform_device *pdev);
+static int via686a_remove(struct platform_device *pdev);
static inline int via686a_read_value(struct via686a_data *data, u8 reg)
{
@@ -677,12 +677,12 @@
.name = "via686a",
},
.probe = via686a_probe,
- .remove = __devexit_p(via686a_remove),
+ .remove = via686a_remove,
};
/* This is called when the module is loaded */
-static int __devinit via686a_probe(struct platform_device *pdev)
+static int via686a_probe(struct platform_device *pdev)
{
struct via686a_data *data;
struct resource *res;
@@ -728,7 +728,7 @@
return err;
}
-static int __devexit via686a_remove(struct platform_device *pdev)
+static int via686a_remove(struct platform_device *pdev)
{
struct via686a_data *data = platform_get_drvdata(pdev);
@@ -745,7 +745,7 @@
data->fan_div[1] = reg >> 6;
}
-static void __devinit via686a_init_device(struct via686a_data *data)
+static void via686a_init_device(struct via686a_data *data)
{
u8 reg;
@@ -833,7 +833,7 @@
};
MODULE_DEVICE_TABLE(pci, via686a_pci_ids);
-static int __devinit via686a_device_add(unsigned short address)
+static int via686a_device_add(unsigned short address)
{
struct resource res = {
.start = address,
@@ -874,7 +874,7 @@
return err;
}
-static int __devinit via686a_pci_probe(struct pci_dev *dev,
+static int via686a_pci_probe(struct pci_dev *dev,
const struct pci_device_id *id)
{
u16 address, val;
diff --git a/drivers/hwmon/vt1211.c b/drivers/hwmon/vt1211.c
index f2c6115..7517030 100644
--- a/drivers/hwmon/vt1211.c
+++ b/drivers/hwmon/vt1211.c
@@ -1086,7 +1086,7 @@
* Device registration and initialization
* --------------------------------------------------------------------- */
-static void __devinit vt1211_init_device(struct vt1211_data *data)
+static void vt1211_init_device(struct vt1211_data *data)
{
/* set VRM */
data->vrm = vid_which_vrm();
@@ -1141,7 +1141,7 @@
device_remove_file(dev, &vt1211_sysfs_misc[i]);
}
-static int __devinit vt1211_probe(struct platform_device *pdev)
+static int vt1211_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct vt1211_data *data;
@@ -1217,7 +1217,7 @@
return err;
}
-static int __devexit vt1211_remove(struct platform_device *pdev)
+static int vt1211_remove(struct platform_device *pdev)
{
struct vt1211_data *data = platform_get_drvdata(pdev);
@@ -1233,7 +1233,7 @@
.name = DRVNAME,
},
.probe = vt1211_probe,
- .remove = __devexit_p(vt1211_remove),
+ .remove = vt1211_remove,
};
static int __init vt1211_device_add(unsigned short address)
diff --git a/drivers/hwmon/vt8231.c b/drivers/hwmon/vt8231.c
index 84e3dc5..a56355c 100644
--- a/drivers/hwmon/vt8231.c
+++ b/drivers/hwmon/vt8231.c
@@ -176,7 +176,7 @@
static struct pci_dev *s_bridge;
static int vt8231_probe(struct platform_device *pdev);
-static int __devexit vt8231_remove(struct platform_device *pdev);
+static int vt8231_remove(struct platform_device *pdev);
static struct vt8231_data *vt8231_update_device(struct device *dev);
static void vt8231_init_device(struct vt8231_data *data);
@@ -762,7 +762,7 @@
.name = "vt8231",
},
.probe = vt8231_probe,
- .remove = __devexit_p(vt8231_remove),
+ .remove = vt8231_remove,
};
static DEFINE_PCI_DEVICE_TABLE(vt8231_pci_ids) = {
@@ -772,7 +772,7 @@
MODULE_DEVICE_TABLE(pci, vt8231_pci_ids);
-static int __devinit vt8231_pci_probe(struct pci_dev *dev,
+static int vt8231_pci_probe(struct pci_dev *dev,
const struct pci_device_id *id);
static struct pci_driver vt8231_pci_driver = {
@@ -851,7 +851,7 @@
return err;
}
-static int __devexit vt8231_remove(struct platform_device *pdev)
+static int vt8231_remove(struct platform_device *pdev)
{
struct vt8231_data *data = platform_get_drvdata(pdev);
int i;
@@ -943,7 +943,7 @@
return data;
}
-static int __devinit vt8231_device_add(unsigned short address)
+static int vt8231_device_add(unsigned short address)
{
struct resource res = {
.start = address,
@@ -984,7 +984,7 @@
return err;
}
-static int __devinit vt8231_pci_probe(struct pci_dev *dev,
+static int vt8231_pci_probe(struct pci_dev *dev,
const struct pci_device_id *id)
{
u16 address, val;
diff --git a/drivers/hwmon/w83627ehf.c b/drivers/hwmon/w83627ehf.c
index de3c7e0..55ac41c 100644
--- a/drivers/hwmon/w83627ehf.c
+++ b/drivers/hwmon/w83627ehf.c
@@ -1866,7 +1866,7 @@
}
/* Get the monitoring functions started */
-static inline void __devinit w83627ehf_init_device(struct w83627ehf_data *data,
+static inline void w83627ehf_init_device(struct w83627ehf_data *data,
enum kinds kind)
{
int i;
@@ -1952,7 +1952,7 @@
data->reg_temp_config[r2] = tmp;
}
-static void __devinit
+static void
w83627ehf_set_temp_reg_ehf(struct w83627ehf_data *data, int n_temp)
{
int i;
@@ -1965,7 +1965,7 @@
}
}
-static void __devinit
+static void
w83627ehf_check_fan_inputs(const struct w83627ehf_sio_data *sio_data,
struct w83627ehf_data *data)
{
@@ -2054,7 +2054,7 @@
}
}
-static int __devinit w83627ehf_probe(struct platform_device *pdev)
+static int w83627ehf_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct w83627ehf_sio_data *sio_data = dev->platform_data;
@@ -2596,7 +2596,7 @@
return err;
}
-static int __devexit w83627ehf_remove(struct platform_device *pdev)
+static int w83627ehf_remove(struct platform_device *pdev)
{
struct w83627ehf_data *data = platform_get_drvdata(pdev);
@@ -2614,7 +2614,7 @@
.name = DRVNAME,
},
.probe = w83627ehf_probe,
- .remove = __devexit_p(w83627ehf_remove),
+ .remove = w83627ehf_remove,
};
/* w83627ehf_find() looks for a '627 in the Super-I/O config space */
diff --git a/drivers/hwmon/w83627hf.c b/drivers/hwmon/w83627hf.c
index af15899..7f68b83 100644
--- a/drivers/hwmon/w83627hf.c
+++ b/drivers/hwmon/w83627hf.c
@@ -393,7 +393,7 @@
static int w83627hf_probe(struct platform_device *pdev);
-static int __devexit w83627hf_remove(struct platform_device *pdev);
+static int w83627hf_remove(struct platform_device *pdev);
static int w83627hf_read_value(struct w83627hf_data *data, u16 reg);
static int w83627hf_write_value(struct w83627hf_data *data, u16 reg, u16 value);
@@ -407,7 +407,7 @@
.name = DRVNAME,
},
.probe = w83627hf_probe,
- .remove = __devexit_p(w83627hf_remove),
+ .remove = w83627hf_remove,
};
static ssize_t
@@ -1342,7 +1342,7 @@
.attrs = w83627hf_attributes_opt,
};
-static int __devinit w83627hf_probe(struct platform_device *pdev)
+static int w83627hf_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct w83627hf_sio_data *sio_data = dev->platform_data;
@@ -1508,7 +1508,7 @@
return err;
}
-static int __devexit w83627hf_remove(struct platform_device *pdev)
+static int w83627hf_remove(struct platform_device *pdev)
{
struct w83627hf_data *data = platform_get_drvdata(pdev);
@@ -1564,7 +1564,7 @@
return res;
}
-static int __devinit w83627thf_read_gpio5(struct platform_device *pdev)
+static int w83627thf_read_gpio5(struct platform_device *pdev)
{
struct w83627hf_sio_data *sio_data = pdev->dev.platform_data;
int res = 0xff, sel;
@@ -1597,7 +1597,7 @@
return res;
}
-static int __devinit w83687thf_read_vid(struct platform_device *pdev)
+static int w83687thf_read_vid(struct platform_device *pdev)
{
struct w83627hf_sio_data *sio_data = pdev->dev.platform_data;
int res = 0xff;
@@ -1649,7 +1649,7 @@
return 0;
}
-static void __devinit w83627hf_init_device(struct platform_device *pdev)
+static void w83627hf_init_device(struct platform_device *pdev)
{
struct w83627hf_data *data = platform_get_drvdata(pdev);
int i;
diff --git a/drivers/hwmon/w83781d.c b/drivers/hwmon/w83781d.c
index 20f11d3..93bd286 100644
--- a/drivers/hwmon/w83781d.c
+++ b/drivers/hwmon/w83781d.c
@@ -1764,7 +1764,7 @@
return 0;
}
-static int __devinit
+static int
w83781d_isa_probe(struct platform_device *pdev)
{
int err, reg;
@@ -1824,7 +1824,7 @@
return err;
}
-static int __devexit
+static int
w83781d_isa_remove(struct platform_device *pdev)
{
struct w83781d_data *data = platform_get_drvdata(pdev);
@@ -1842,7 +1842,7 @@
.name = "w83781d",
},
.probe = w83781d_isa_probe,
- .remove = __devexit_p(w83781d_isa_remove),
+ .remove = w83781d_isa_remove,
};
/* return 1 if a supported chip is found, 0 otherwise */
diff --git a/drivers/hwmon/wm831x-hwmon.c b/drivers/hwmon/wm831x-hwmon.c
index d0db1f2..df6ceaf 100644
--- a/drivers/hwmon/wm831x-hwmon.c
+++ b/drivers/hwmon/wm831x-hwmon.c
@@ -157,7 +157,7 @@
.attrs = wm831x_attributes,
};
-static int __devinit wm831x_hwmon_probe(struct platform_device *pdev)
+static int wm831x_hwmon_probe(struct platform_device *pdev)
{
struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
struct wm831x_hwmon *hwmon;
@@ -189,7 +189,7 @@
return ret;
}
-static int __devexit wm831x_hwmon_remove(struct platform_device *pdev)
+static int wm831x_hwmon_remove(struct platform_device *pdev)
{
struct wm831x_hwmon *hwmon = platform_get_drvdata(pdev);
@@ -201,7 +201,7 @@
static struct platform_driver wm831x_hwmon_driver = {
.probe = wm831x_hwmon_probe,
- .remove = __devexit_p(wm831x_hwmon_remove),
+ .remove = wm831x_hwmon_remove,
.driver = {
.name = "wm831x-hwmon",
.owner = THIS_MODULE,
diff --git a/drivers/hwmon/wm8350-hwmon.c b/drivers/hwmon/wm8350-hwmon.c
index b955756..64bf75c 100644
--- a/drivers/hwmon/wm8350-hwmon.c
+++ b/drivers/hwmon/wm8350-hwmon.c
@@ -91,7 +91,7 @@
.attrs = wm8350_attributes,
};
-static int __devinit wm8350_hwmon_probe(struct platform_device *pdev)
+static int wm8350_hwmon_probe(struct platform_device *pdev)
{
struct wm8350 *wm8350 = platform_get_drvdata(pdev);
int ret;
@@ -114,7 +114,7 @@
return ret;
}
-static int __devexit wm8350_hwmon_remove(struct platform_device *pdev)
+static int wm8350_hwmon_remove(struct platform_device *pdev)
{
struct wm8350 *wm8350 = platform_get_drvdata(pdev);
@@ -126,7 +126,7 @@
static struct platform_driver wm8350_hwmon_driver = {
.probe = wm8350_hwmon_probe,
- .remove = __devexit_p(wm8350_hwmon_remove),
+ .remove = wm8350_hwmon_remove,
.driver = {
.name = "wm8350-hwmon",
.owner = THIS_MODULE,
diff --git a/drivers/hwspinlock/omap_hwspinlock.c b/drivers/hwspinlock/omap_hwspinlock.c
index 887d34e..292869c 100644
--- a/drivers/hwspinlock/omap_hwspinlock.c
+++ b/drivers/hwspinlock/omap_hwspinlock.c
@@ -78,7 +78,7 @@
.relax = omap_hwspinlock_relax,
};
-static int __devinit omap_hwspinlock_probe(struct platform_device *pdev)
+static int omap_hwspinlock_probe(struct platform_device *pdev)
{
struct hwspinlock_pdata *pdata = pdev->dev.platform_data;
struct hwspinlock_device *bank;
@@ -142,7 +142,7 @@
return ret;
}
-static int __devexit omap_hwspinlock_remove(struct platform_device *pdev)
+static int omap_hwspinlock_remove(struct platform_device *pdev)
{
struct hwspinlock_device *bank = platform_get_drvdata(pdev);
void __iomem *io_base = bank->lock[0].priv - LOCK_BASE_OFFSET;
@@ -163,7 +163,7 @@
static struct platform_driver omap_hwspinlock_driver = {
.probe = omap_hwspinlock_probe,
- .remove = __devexit_p(omap_hwspinlock_remove),
+ .remove = omap_hwspinlock_remove,
.driver = {
.name = "omap_hwspinlock",
.owner = THIS_MODULE,
diff --git a/drivers/hwspinlock/u8500_hsem.c b/drivers/hwspinlock/u8500_hsem.c
index 86980fe..401c33b 100644
--- a/drivers/hwspinlock/u8500_hsem.c
+++ b/drivers/hwspinlock/u8500_hsem.c
@@ -91,7 +91,7 @@
.relax = u8500_hsem_relax,
};
-static int __devinit u8500_hsem_probe(struct platform_device *pdev)
+static int u8500_hsem_probe(struct platform_device *pdev)
{
struct hwspinlock_pdata *pdata = pdev->dev.platform_data;
struct hwspinlock_device *bank;
@@ -148,7 +148,7 @@
return ret;
}
-static int __devexit u8500_hsem_remove(struct platform_device *pdev)
+static int u8500_hsem_remove(struct platform_device *pdev)
{
struct hwspinlock_device *bank = platform_get_drvdata(pdev);
void __iomem *io_base = bank->lock[0].priv - HSEM_REGISTER_OFFSET;
@@ -172,7 +172,7 @@
static struct platform_driver u8500_hsem_driver = {
.probe = u8500_hsem_probe,
- .remove = __devexit_p(u8500_hsem_remove),
+ .remove = u8500_hsem_remove,
.driver = {
.name = "u8500_hsem",
.owner = THIS_MODULE,
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index a7edf98..e388590 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -39,6 +39,7 @@
#include <linux/irqflags.h>
#include <linux/rwsem.h>
#include <linux/pm_runtime.h>
+#include <linux/acpi.h>
#include <asm/uaccess.h>
#include "i2c-core.h"
@@ -78,6 +79,10 @@
if (of_driver_match_device(dev, drv))
return 1;
+ /* Then ACPI style match */
+ if (acpi_driver_match_device(dev, drv))
+ return 1;
+
driver = to_i2c_driver(drv);
/* match on an id table if there is one */
if (driver->id_table)
@@ -539,6 +544,7 @@
client->dev.bus = &i2c_bus_type;
client->dev.type = &i2c_client_type;
client->dev.of_node = info->of_node;
+ ACPI_HANDLE_SET(&client->dev, info->acpi_node.handle);
/* For 10-bit clients, add an arbitrary offset to avoid collisions */
dev_set_name(&client->dev, "%d-%04x", i2c_adapter_id(adap),
diff --git a/drivers/idle/intel_idle.c b/drivers/idle/intel_idle.c
index b0f6b4c..c49c04d 100644
--- a/drivers/idle/intel_idle.c
+++ b/drivers/idle/intel_idle.c
@@ -56,7 +56,6 @@
#include <linux/kernel.h>
#include <linux/cpuidle.h>
#include <linux/clockchips.h>
-#include <linux/hrtimer.h> /* ktime_get_real() */
#include <trace/events/power.h>
#include <linux/sched.h>
#include <linux/notifier.h>
@@ -72,6 +71,7 @@
static struct cpuidle_driver intel_idle_driver = {
.name = "intel_idle",
.owner = THIS_MODULE,
+ .en_core_tk_irqen = 1,
};
/* intel_idle.max_cstate=0 disables driver */
static int max_cstate = MWAIT_MAX_NUM_CSTATES - 1;
@@ -281,8 +281,6 @@
struct cpuidle_state_usage *state_usage = &dev->states_usage[index];
unsigned long eax = (unsigned long)cpuidle_get_statedata(state_usage);
unsigned int cstate;
- ktime_t kt_before, kt_after;
- s64 usec_delta;
int cpu = smp_processor_id();
cstate = (((eax) >> MWAIT_SUBSTATE_SIZE) & MWAIT_CSTATE_MASK) + 1;
@@ -297,8 +295,6 @@
if (!(lapic_timer_reliable_states & (1 << (cstate))))
clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &cpu);
- kt_before = ktime_get_real();
-
stop_critical_timings();
if (!need_resched()) {
@@ -310,17 +306,9 @@
start_critical_timings();
- kt_after = ktime_get_real();
- usec_delta = ktime_to_us(ktime_sub(kt_after, kt_before));
-
- local_irq_enable();
-
if (!(lapic_timer_reliable_states & (1 << (cstate))))
clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &cpu);
- /* Update cpuidle counters */
- dev->last_residency = (int)usec_delta;
-
return index;
}
diff --git a/drivers/iio/Kconfig b/drivers/iio/Kconfig
index fc937ac..b2f963be 100644
--- a/drivers/iio/Kconfig
+++ b/drivers/iio/Kconfig
@@ -20,6 +20,12 @@
if IIO_BUFFER
+config IIO_BUFFER_CB
+boolean "IIO callback buffer used for push in-kernel interfaces"
+ help
+ Should be selected by any drivers that do-inkernel push
+ usage. That is, those where the data is pushed to the consumer.
+
config IIO_KFIFO_BUF
select IIO_TRIGGER
tristate "Industrial I/O buffering based on kfifo"
@@ -57,11 +63,12 @@
source "drivers/iio/accel/Kconfig"
source "drivers/iio/adc/Kconfig"
source "drivers/iio/amplifiers/Kconfig"
-source "drivers/iio/light/Kconfig"
-source "drivers/iio/frequency/Kconfig"
-source "drivers/iio/dac/Kconfig"
source "drivers/iio/common/Kconfig"
+source "drivers/iio/dac/Kconfig"
+source "drivers/iio/frequency/Kconfig"
source "drivers/iio/gyro/Kconfig"
+source "drivers/iio/imu/Kconfig"
+source "drivers/iio/light/Kconfig"
source "drivers/iio/magnetometer/Kconfig"
endif # IIO
diff --git a/drivers/iio/Makefile b/drivers/iio/Makefile
index 761f2b6..a0e8cdd 100644
--- a/drivers/iio/Makefile
+++ b/drivers/iio/Makefile
@@ -6,6 +6,7 @@
industrialio-y := industrialio-core.o industrialio-event.o inkern.o
industrialio-$(CONFIG_IIO_BUFFER) += industrialio-buffer.o
industrialio-$(CONFIG_IIO_TRIGGER) += industrialio-trigger.o
+industrialio-$(CONFIG_IIO_BUFFER_CB) += buffer_cb.o
obj-$(CONFIG_IIO_TRIGGERED_BUFFER) += industrialio-triggered-buffer.o
obj-$(CONFIG_IIO_KFIFO_BUF) += kfifo_buf.o
@@ -13,9 +14,10 @@
obj-y += accel/
obj-y += adc/
obj-y += amplifiers/
-obj-y += light/
-obj-y += frequency/
-obj-y += dac/
obj-y += common/
+obj-y += dac/
obj-y += gyro/
+obj-y += frequency/
+obj-y += imu/
+obj-y += light/
obj-y += magnetometer/
diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig
index b2510c4..fe4bcd7 100644
--- a/drivers/iio/accel/Kconfig
+++ b/drivers/iio/accel/Kconfig
@@ -8,7 +8,7 @@
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
select HID_SENSOR_IIO_COMMON
- tristate "HID Acelerometers 3D"
+ tristate "HID Accelerometers 3D"
help
Say yes here to build support for the HID SENSOR
accelerometers 3D.
diff --git a/drivers/iio/accel/hid-sensor-accel-3d.c b/drivers/iio/accel/hid-sensor-accel-3d.c
index 314a405..e67bb91 100644
--- a/drivers/iio/accel/hid-sensor-accel-3d.c
+++ b/drivers/iio/accel/hid-sensor-accel-3d.c
@@ -197,21 +197,8 @@
/* Function to push data to buffer */
static void hid_sensor_push_data(struct iio_dev *indio_dev, u8 *data, int len)
{
- struct iio_buffer *buffer = indio_dev->buffer;
- int datum_sz;
-
dev_dbg(&indio_dev->dev, "hid_sensor_push_data\n");
- if (!buffer) {
- dev_err(&indio_dev->dev, "Buffer == NULL\n");
- return;
- }
- datum_sz = buffer->access->get_bytes_per_datum(buffer);
- if (len > datum_sz) {
- dev_err(&indio_dev->dev, "Datum size mismatch %d:%d\n", len,
- datum_sz);
- return;
- }
- iio_push_to_buffer(buffer, (u8 *)data);
+ iio_push_to_buffers(indio_dev, (u8 *)data);
}
/* Callback handler to send event after all samples are received and captured */
@@ -319,10 +306,10 @@
goto error_free_dev;
}
- channels = kmemdup(accel_3d_channels,
- sizeof(accel_3d_channels),
- GFP_KERNEL);
+ channels = kmemdup(accel_3d_channels, sizeof(accel_3d_channels),
+ GFP_KERNEL);
if (!channels) {
+ ret = -ENOMEM;
dev_err(&pdev->dev, "failed to duplicate channels\n");
goto error_free_dev;
}
diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index 4927581..961b8d0 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -18,6 +18,18 @@
Say yes here to build support for Analog Devices AD7265 and AD7266
ADCs.
+config AD7298
+ tristate "Analog Devices AD7298 ADC driver"
+ depends on SPI
+ select IIO_BUFFER
+ select IIO_TRIGGERED_BUFFER
+ help
+ Say yes here to build support for Analog Devices AD7298
+ 8 Channel ADC with temperature sensor.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ad7298.
+
config AD7791
tristate "Analog Devices AD7791 ADC driver"
depends on SPI
@@ -30,6 +42,18 @@
To compile this driver as a module, choose M here: the module will be
called ad7791.
+config AD7793
+ tristate "Analog Devices AD7793 and similar ADCs driver"
+ depends on SPI
+ select AD_SIGMA_DELTA
+ help
+ Say yes here to build support for Analog Devices AD7785, AD7792, AD7793,
+ AD7794 and AD7795 SPI analog to digital converters (ADC).
+ If unsure, say N (but it's safe to say "Y").
+
+ To compile this driver as a module, choose M here: the
+ module will be called AD7793.
+
config AD7476
tristate "Analog Devices AD7476 and similar 1-channel ADCs driver"
depends on SPI
@@ -45,6 +69,19 @@
To compile this driver as a module, choose M here: the
module will be called ad7476.
+config AD7887
+ tristate "Analog Devices AD7887 ADC driver"
+ depends on SPI
+ select IIO_BUFFER
+ select IIO_TRIGGERED_BUFFER
+ help
+ Say yes here to build support for Analog Devices
+ AD7887 SPI analog to digital converter (ADC).
+ If unsure, say N (but it's safe to say "Y").
+
+ To compile this driver as a module, choose M here: the
+ module will be called ad7887.
+
config AT91_ADC
tristate "Atmel AT91 ADC"
depends on ARCH_AT91
@@ -60,4 +97,32 @@
help
Say yes here to build support for TI LP8788 ADC.
+config MAX1363
+ tristate "Maxim max1363 ADC driver"
+ depends on I2C
+ select IIO_TRIGGER
+ select MAX1363_RING_BUFFER
+ select IIO_BUFFER
+ select IIO_KFIFO_BUF
+ help
+ Say yes here to build support for many Maxim i2c analog to digital
+ converters (ADC). (max1361, max1362, max1363, max1364, max1036,
+ max1037, max1038, max1039, max1136, max1136, max1137, max1138,
+ max1139, max1236, max1237, max11238, max1239, max11600, max11601,
+ max11602, max11603, max11604, max11605, max11606, max11607,
+ max11608, max11609, max11610, max11611, max11612, max11613,
+ max11614, max11615, max11616, max11617, max11644, max11645,
+ max11646, max11647) Provides direct access via sysfs and buffered
+ data via the iio dev interface.
+
+config TI_ADC081C
+ tristate "Texas Instruments ADC081C021/027"
+ depends on I2C
+ help
+ If you say yes here you get support for Texas Instruments ADC081C021
+ and ADC081C027 ADC chips.
+
+ This driver can also be built as a module. If so, the module will be
+ called ti-adc081c.
+
endmenu
diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
index 900995d..472fd7c 100644
--- a/drivers/iio/adc/Makefile
+++ b/drivers/iio/adc/Makefile
@@ -4,7 +4,13 @@
obj-$(CONFIG_AD_SIGMA_DELTA) += ad_sigma_delta.o
obj-$(CONFIG_AD7266) += ad7266.o
+obj-$(CONFIG_AD7298) += ad7298.o
obj-$(CONFIG_AD7476) += ad7476.o
obj-$(CONFIG_AD7791) += ad7791.o
+obj-$(CONFIG_AD7793) += ad7793.o
+obj-$(CONFIG_AD7887) += ad7887.o
obj-$(CONFIG_AT91_ADC) += at91_adc.o
obj-$(CONFIG_LP8788_ADC) += lp8788_adc.o
+obj-$(CONFIG_MAX1363) += max1363.o
+obj-$(CONFIG_TI_ADC081C) += ti-adc081c.o
+
diff --git a/drivers/iio/adc/ad7266.c b/drivers/iio/adc/ad7266.c
index b11f214..a6f4fc5 100644
--- a/drivers/iio/adc/ad7266.c
+++ b/drivers/iio/adc/ad7266.c
@@ -91,7 +91,6 @@
{
struct iio_poll_func *pf = p;
struct iio_dev *indio_dev = pf->indio_dev;
- struct iio_buffer *buffer = indio_dev->buffer;
struct ad7266_state *st = iio_priv(indio_dev);
int ret;
@@ -99,7 +98,7 @@
if (ret == 0) {
if (indio_dev->scan_timestamp)
((s64 *)st->data)[1] = pf->timestamp;
- iio_push_to_buffer(buffer, (u8 *)st->data);
+ iio_push_to_buffers(indio_dev, (u8 *)st->data);
}
iio_trigger_notify_done(indio_dev->trig);
diff --git a/drivers/iio/adc/ad7298.c b/drivers/iio/adc/ad7298.c
new file mode 100644
index 0000000..2364807
--- /dev/null
+++ b/drivers/iio/adc/ad7298.c
@@ -0,0 +1,408 @@
+/*
+ * AD7298 SPI ADC driver
+ *
+ * Copyright 2011 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/sysfs.h>
+#include <linux/spi/spi.h>
+#include <linux/regulator/consumer.h>
+#include <linux/err.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+
+#include <linux/platform_data/ad7298.h>
+
+#define AD7298_WRITE (1 << 15) /* write to the control register */
+#define AD7298_REPEAT (1 << 14) /* repeated conversion enable */
+#define AD7298_CH(x) (1 << (13 - (x))) /* channel select */
+#define AD7298_TSENSE (1 << 5) /* temperature conversion enable */
+#define AD7298_EXTREF (1 << 2) /* external reference enable */
+#define AD7298_TAVG (1 << 1) /* temperature sensor averaging enable */
+#define AD7298_PDD (1 << 0) /* partial power down enable */
+
+#define AD7298_MAX_CHAN 8
+#define AD7298_BITS 12
+#define AD7298_STORAGE_BITS 16
+#define AD7298_INTREF_mV 2500
+
+#define AD7298_CH_TEMP 9
+
+#define RES_MASK(bits) ((1 << (bits)) - 1)
+
+struct ad7298_state {
+ struct spi_device *spi;
+ struct regulator *reg;
+ unsigned ext_ref;
+ struct spi_transfer ring_xfer[10];
+ struct spi_transfer scan_single_xfer[3];
+ struct spi_message ring_msg;
+ struct spi_message scan_single_msg;
+ /*
+ * DMA (thus cache coherency maintenance) requires the
+ * transfer buffers to live in their own cache lines.
+ */
+ __be16 rx_buf[12] ____cacheline_aligned;
+ __be16 tx_buf[2];
+};
+
+#define AD7298_V_CHAN(index) \
+ { \
+ .type = IIO_VOLTAGE, \
+ .indexed = 1, \
+ .channel = index, \
+ .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | \
+ IIO_CHAN_INFO_SCALE_SHARED_BIT, \
+ .address = index, \
+ .scan_index = index, \
+ .scan_type = { \
+ .sign = 'u', \
+ .realbits = 12, \
+ .storagebits = 16, \
+ .endianness = IIO_BE, \
+ }, \
+ }
+
+static const struct iio_chan_spec ad7298_channels[] = {
+ {
+ .type = IIO_TEMP,
+ .indexed = 1,
+ .channel = 0,
+ .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+ IIO_CHAN_INFO_SCALE_SEPARATE_BIT |
+ IIO_CHAN_INFO_OFFSET_SEPARATE_BIT,
+ .address = AD7298_CH_TEMP,
+ .scan_index = -1,
+ .scan_type = {
+ .sign = 's',
+ .realbits = 32,
+ .storagebits = 32,
+ },
+ },
+ AD7298_V_CHAN(0),
+ AD7298_V_CHAN(1),
+ AD7298_V_CHAN(2),
+ AD7298_V_CHAN(3),
+ AD7298_V_CHAN(4),
+ AD7298_V_CHAN(5),
+ AD7298_V_CHAN(6),
+ AD7298_V_CHAN(7),
+ IIO_CHAN_SOFT_TIMESTAMP(8),
+};
+
+/**
+ * ad7298_update_scan_mode() setup the spi transfer buffer for the new scan mask
+ **/
+static int ad7298_update_scan_mode(struct iio_dev *indio_dev,
+ const unsigned long *active_scan_mask)
+{
+ struct ad7298_state *st = iio_priv(indio_dev);
+ int i, m;
+ unsigned short command;
+ int scan_count;
+
+ /* Now compute overall size */
+ scan_count = bitmap_weight(active_scan_mask, indio_dev->masklength);
+
+ command = AD7298_WRITE | st->ext_ref;
+
+ for (i = 0, m = AD7298_CH(0); i < AD7298_MAX_CHAN; i++, m >>= 1)
+ if (test_bit(i, active_scan_mask))
+ command |= m;
+
+ st->tx_buf[0] = cpu_to_be16(command);
+
+ /* build spi ring message */
+ st->ring_xfer[0].tx_buf = &st->tx_buf[0];
+ st->ring_xfer[0].len = 2;
+ st->ring_xfer[0].cs_change = 1;
+ st->ring_xfer[1].tx_buf = &st->tx_buf[1];
+ st->ring_xfer[1].len = 2;
+ st->ring_xfer[1].cs_change = 1;
+
+ spi_message_init(&st->ring_msg);
+ spi_message_add_tail(&st->ring_xfer[0], &st->ring_msg);
+ spi_message_add_tail(&st->ring_xfer[1], &st->ring_msg);
+
+ for (i = 0; i < scan_count; i++) {
+ st->ring_xfer[i + 2].rx_buf = &st->rx_buf[i];
+ st->ring_xfer[i + 2].len = 2;
+ st->ring_xfer[i + 2].cs_change = 1;
+ spi_message_add_tail(&st->ring_xfer[i + 2], &st->ring_msg);
+ }
+ /* make sure last transfer cs_change is not set */
+ st->ring_xfer[i + 1].cs_change = 0;
+
+ return 0;
+}
+
+/**
+ * ad7298_trigger_handler() bh of trigger launched polling to ring buffer
+ *
+ * Currently there is no option in this driver to disable the saving of
+ * timestamps within the ring.
+ **/
+static irqreturn_t ad7298_trigger_handler(int irq, void *p)
+{
+ struct iio_poll_func *pf = p;
+ struct iio_dev *indio_dev = pf->indio_dev;
+ struct ad7298_state *st = iio_priv(indio_dev);
+ s64 time_ns = 0;
+ int b_sent;
+
+ b_sent = spi_sync(st->spi, &st->ring_msg);
+ if (b_sent)
+ goto done;
+
+ if (indio_dev->scan_timestamp) {
+ time_ns = iio_get_time_ns();
+ memcpy((u8 *)st->rx_buf + indio_dev->scan_bytes - sizeof(s64),
+ &time_ns, sizeof(time_ns));
+ }
+
+ iio_push_to_buffers(indio_dev, (u8 *)st->rx_buf);
+
+done:
+ iio_trigger_notify_done(indio_dev->trig);
+
+ return IRQ_HANDLED;
+}
+
+static int ad7298_scan_direct(struct ad7298_state *st, unsigned ch)
+{
+ int ret;
+ st->tx_buf[0] = cpu_to_be16(AD7298_WRITE | st->ext_ref |
+ (AD7298_CH(0) >> ch));
+
+ ret = spi_sync(st->spi, &st->scan_single_msg);
+ if (ret)
+ return ret;
+
+ return be16_to_cpu(st->rx_buf[0]);
+}
+
+static int ad7298_scan_temp(struct ad7298_state *st, int *val)
+{
+ int ret;
+ __be16 buf;
+
+ buf = cpu_to_be16(AD7298_WRITE | AD7298_TSENSE |
+ AD7298_TAVG | st->ext_ref);
+
+ ret = spi_write(st->spi, (u8 *)&buf, 2);
+ if (ret)
+ return ret;
+
+ buf = cpu_to_be16(0);
+
+ ret = spi_write(st->spi, (u8 *)&buf, 2);
+ if (ret)
+ return ret;
+
+ usleep_range(101, 1000); /* sleep > 100us */
+
+ ret = spi_read(st->spi, (u8 *)&buf, 2);
+ if (ret)
+ return ret;
+
+ *val = sign_extend32(be16_to_cpu(buf), 11);
+
+ return 0;
+}
+
+static int ad7298_get_ref_voltage(struct ad7298_state *st)
+{
+ int vref;
+
+ if (st->ext_ref) {
+ vref = regulator_get_voltage(st->reg);
+ if (vref < 0)
+ return vref;
+
+ return vref / 1000;
+ } else {
+ return AD7298_INTREF_mV;
+ }
+}
+
+static int ad7298_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val,
+ int *val2,
+ long m)
+{
+ int ret;
+ struct ad7298_state *st = iio_priv(indio_dev);
+
+ switch (m) {
+ case IIO_CHAN_INFO_RAW:
+ mutex_lock(&indio_dev->mlock);
+ if (indio_dev->currentmode == INDIO_BUFFER_TRIGGERED) {
+ ret = -EBUSY;
+ } else {
+ if (chan->address == AD7298_CH_TEMP)
+ ret = ad7298_scan_temp(st, val);
+ else
+ ret = ad7298_scan_direct(st, chan->address);
+ }
+ mutex_unlock(&indio_dev->mlock);
+
+ if (ret < 0)
+ return ret;
+
+ if (chan->address != AD7298_CH_TEMP)
+ *val = ret & RES_MASK(AD7298_BITS);
+
+ return IIO_VAL_INT;
+ case IIO_CHAN_INFO_SCALE:
+ switch (chan->type) {
+ case IIO_VOLTAGE:
+ *val = ad7298_get_ref_voltage(st);
+ *val2 = chan->scan_type.realbits;
+ return IIO_VAL_FRACTIONAL_LOG2;
+ case IIO_TEMP:
+ *val = ad7298_get_ref_voltage(st);
+ *val2 = 10;
+ return IIO_VAL_FRACTIONAL;
+ default:
+ return -EINVAL;
+ }
+ case IIO_CHAN_INFO_OFFSET:
+ *val = 1093 - 2732500 / ad7298_get_ref_voltage(st);
+ return IIO_VAL_INT;
+ }
+ return -EINVAL;
+}
+
+static const struct iio_info ad7298_info = {
+ .read_raw = &ad7298_read_raw,
+ .update_scan_mode = ad7298_update_scan_mode,
+ .driver_module = THIS_MODULE,
+};
+
+static int __devinit ad7298_probe(struct spi_device *spi)
+{
+ struct ad7298_platform_data *pdata = spi->dev.platform_data;
+ struct ad7298_state *st;
+ struct iio_dev *indio_dev = iio_device_alloc(sizeof(*st));
+ int ret;
+
+ if (indio_dev == NULL)
+ return -ENOMEM;
+
+ st = iio_priv(indio_dev);
+
+ if (pdata && pdata->ext_ref)
+ st->ext_ref = AD7298_EXTREF;
+
+ if (st->ext_ref) {
+ st->reg = regulator_get(&spi->dev, "vref");
+ if (IS_ERR(st->reg)) {
+ ret = PTR_ERR(st->reg);
+ goto error_free;
+ }
+ ret = regulator_enable(st->reg);
+ if (ret)
+ goto error_put_reg;
+ }
+
+ spi_set_drvdata(spi, indio_dev);
+
+ st->spi = spi;
+
+ indio_dev->name = spi_get_device_id(spi)->name;
+ indio_dev->dev.parent = &spi->dev;
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->channels = ad7298_channels;
+ indio_dev->num_channels = ARRAY_SIZE(ad7298_channels);
+ indio_dev->info = &ad7298_info;
+
+ /* Setup default message */
+
+ st->scan_single_xfer[0].tx_buf = &st->tx_buf[0];
+ st->scan_single_xfer[0].len = 2;
+ st->scan_single_xfer[0].cs_change = 1;
+ st->scan_single_xfer[1].tx_buf = &st->tx_buf[1];
+ st->scan_single_xfer[1].len = 2;
+ st->scan_single_xfer[1].cs_change = 1;
+ st->scan_single_xfer[2].rx_buf = &st->rx_buf[0];
+ st->scan_single_xfer[2].len = 2;
+
+ spi_message_init(&st->scan_single_msg);
+ spi_message_add_tail(&st->scan_single_xfer[0], &st->scan_single_msg);
+ spi_message_add_tail(&st->scan_single_xfer[1], &st->scan_single_msg);
+ spi_message_add_tail(&st->scan_single_xfer[2], &st->scan_single_msg);
+
+ ret = iio_triggered_buffer_setup(indio_dev, NULL,
+ &ad7298_trigger_handler, NULL);
+ if (ret)
+ goto error_disable_reg;
+
+ ret = iio_device_register(indio_dev);
+ if (ret)
+ goto error_cleanup_ring;
+
+ return 0;
+
+error_cleanup_ring:
+ iio_triggered_buffer_cleanup(indio_dev);
+error_disable_reg:
+ if (st->ext_ref)
+ regulator_disable(st->reg);
+error_put_reg:
+ if (st->ext_ref)
+ regulator_put(st->reg);
+error_free:
+ iio_device_free(indio_dev);
+
+ return ret;
+}
+
+static int __devexit ad7298_remove(struct spi_device *spi)
+{
+ struct iio_dev *indio_dev = spi_get_drvdata(spi);
+ struct ad7298_state *st = iio_priv(indio_dev);
+
+ iio_device_unregister(indio_dev);
+ iio_triggered_buffer_cleanup(indio_dev);
+ if (st->ext_ref) {
+ regulator_disable(st->reg);
+ regulator_put(st->reg);
+ }
+ iio_device_free(indio_dev);
+
+ return 0;
+}
+
+static const struct spi_device_id ad7298_id[] = {
+ {"ad7298", 0},
+ {}
+};
+MODULE_DEVICE_TABLE(spi, ad7298_id);
+
+static struct spi_driver ad7298_driver = {
+ .driver = {
+ .name = "ad7298",
+ .owner = THIS_MODULE,
+ },
+ .probe = ad7298_probe,
+ .remove = __devexit_p(ad7298_remove),
+ .id_table = ad7298_id,
+};
+module_spi_driver(ad7298_driver);
+
+MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
+MODULE_DESCRIPTION("Analog Devices AD7298 ADC");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/adc/ad7476.c b/drivers/iio/adc/ad7476.c
index 7f2f45a..330248b 100644
--- a/drivers/iio/adc/ad7476.c
+++ b/drivers/iio/adc/ad7476.c
@@ -76,7 +76,7 @@
if (indio_dev->scan_timestamp)
((s64 *)st->data)[1] = time_ns;
- iio_push_to_buffer(indio_dev->buffer, st->data);
+ iio_push_to_buffers(indio_dev, st->data);
done:
iio_trigger_notify_done(indio_dev->trig);
diff --git a/drivers/iio/adc/ad7793.c b/drivers/iio/adc/ad7793.c
new file mode 100644
index 0000000..334e31f
--- /dev/null
+++ b/drivers/iio/adc/ad7793.c
@@ -0,0 +1,876 @@
+/*
+ * AD7785/AD7792/AD7793/AD7794/AD7795 SPI ADC driver
+ *
+ * Copyright 2011-2012 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/sysfs.h>
+#include <linux/spi/spi.h>
+#include <linux/regulator/consumer.h>
+#include <linux/err.h>
+#include <linux/sched.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/iio/adc/ad_sigma_delta.h>
+#include <linux/platform_data/ad7793.h>
+
+/* Registers */
+#define AD7793_REG_COMM 0 /* Communications Register (WO, 8-bit) */
+#define AD7793_REG_STAT 0 /* Status Register (RO, 8-bit) */
+#define AD7793_REG_MODE 1 /* Mode Register (RW, 16-bit */
+#define AD7793_REG_CONF 2 /* Configuration Register (RW, 16-bit) */
+#define AD7793_REG_DATA 3 /* Data Register (RO, 16-/24-bit) */
+#define AD7793_REG_ID 4 /* ID Register (RO, 8-bit) */
+#define AD7793_REG_IO 5 /* IO Register (RO, 8-bit) */
+#define AD7793_REG_OFFSET 6 /* Offset Register (RW, 16-bit
+ * (AD7792)/24-bit (AD7793)) */
+#define AD7793_REG_FULLSALE 7 /* Full-Scale Register
+ * (RW, 16-bit (AD7792)/24-bit (AD7793)) */
+
+/* Communications Register Bit Designations (AD7793_REG_COMM) */
+#define AD7793_COMM_WEN (1 << 7) /* Write Enable */
+#define AD7793_COMM_WRITE (0 << 6) /* Write Operation */
+#define AD7793_COMM_READ (1 << 6) /* Read Operation */
+#define AD7793_COMM_ADDR(x) (((x) & 0x7) << 3) /* Register Address */
+#define AD7793_COMM_CREAD (1 << 2) /* Continuous Read of Data Register */
+
+/* Status Register Bit Designations (AD7793_REG_STAT) */
+#define AD7793_STAT_RDY (1 << 7) /* Ready */
+#define AD7793_STAT_ERR (1 << 6) /* Error (Overrange, Underrange) */
+#define AD7793_STAT_CH3 (1 << 2) /* Channel 3 */
+#define AD7793_STAT_CH2 (1 << 1) /* Channel 2 */
+#define AD7793_STAT_CH1 (1 << 0) /* Channel 1 */
+
+/* Mode Register Bit Designations (AD7793_REG_MODE) */
+#define AD7793_MODE_SEL(x) (((x) & 0x7) << 13) /* Operation Mode Select */
+#define AD7793_MODE_SEL_MASK (0x7 << 13) /* Operation Mode Select mask */
+#define AD7793_MODE_CLKSRC(x) (((x) & 0x3) << 6) /* ADC Clock Source Select */
+#define AD7793_MODE_RATE(x) ((x) & 0xF) /* Filter Update Rate Select */
+
+#define AD7793_MODE_CONT 0 /* Continuous Conversion Mode */
+#define AD7793_MODE_SINGLE 1 /* Single Conversion Mode */
+#define AD7793_MODE_IDLE 2 /* Idle Mode */
+#define AD7793_MODE_PWRDN 3 /* Power-Down Mode */
+#define AD7793_MODE_CAL_INT_ZERO 4 /* Internal Zero-Scale Calibration */
+#define AD7793_MODE_CAL_INT_FULL 5 /* Internal Full-Scale Calibration */
+#define AD7793_MODE_CAL_SYS_ZERO 6 /* System Zero-Scale Calibration */
+#define AD7793_MODE_CAL_SYS_FULL 7 /* System Full-Scale Calibration */
+
+#define AD7793_CLK_INT 0 /* Internal 64 kHz Clock not
+ * available at the CLK pin */
+#define AD7793_CLK_INT_CO 1 /* Internal 64 kHz Clock available
+ * at the CLK pin */
+#define AD7793_CLK_EXT 2 /* External 64 kHz Clock */
+#define AD7793_CLK_EXT_DIV2 3 /* External Clock divided by 2 */
+
+/* Configuration Register Bit Designations (AD7793_REG_CONF) */
+#define AD7793_CONF_VBIAS(x) (((x) & 0x3) << 14) /* Bias Voltage
+ * Generator Enable */
+#define AD7793_CONF_BO_EN (1 << 13) /* Burnout Current Enable */
+#define AD7793_CONF_UNIPOLAR (1 << 12) /* Unipolar/Bipolar Enable */
+#define AD7793_CONF_BOOST (1 << 11) /* Boost Enable */
+#define AD7793_CONF_GAIN(x) (((x) & 0x7) << 8) /* Gain Select */
+#define AD7793_CONF_REFSEL(x) ((x) << 6) /* INT/EXT Reference Select */
+#define AD7793_CONF_BUF (1 << 4) /* Buffered Mode Enable */
+#define AD7793_CONF_CHAN(x) ((x) & 0xf) /* Channel select */
+#define AD7793_CONF_CHAN_MASK 0xf /* Channel select mask */
+
+#define AD7793_CH_AIN1P_AIN1M 0 /* AIN1(+) - AIN1(-) */
+#define AD7793_CH_AIN2P_AIN2M 1 /* AIN2(+) - AIN2(-) */
+#define AD7793_CH_AIN3P_AIN3M 2 /* AIN3(+) - AIN3(-) */
+#define AD7793_CH_AIN1M_AIN1M 3 /* AIN1(-) - AIN1(-) */
+#define AD7793_CH_TEMP 6 /* Temp Sensor */
+#define AD7793_CH_AVDD_MONITOR 7 /* AVDD Monitor */
+
+#define AD7795_CH_AIN4P_AIN4M 4 /* AIN4(+) - AIN4(-) */
+#define AD7795_CH_AIN5P_AIN5M 5 /* AIN5(+) - AIN5(-) */
+#define AD7795_CH_AIN6P_AIN6M 6 /* AIN6(+) - AIN6(-) */
+#define AD7795_CH_AIN1M_AIN1M 8 /* AIN1(-) - AIN1(-) */
+
+/* ID Register Bit Designations (AD7793_REG_ID) */
+#define AD7785_ID 0xB
+#define AD7792_ID 0xA
+#define AD7793_ID 0xB
+#define AD7794_ID 0xF
+#define AD7795_ID 0xF
+#define AD7796_ID 0xA
+#define AD7797_ID 0xB
+#define AD7798_ID 0x8
+#define AD7799_ID 0x9
+#define AD7793_ID_MASK 0xF
+
+/* IO (Excitation Current Sources) Register Bit Designations (AD7793_REG_IO) */
+#define AD7793_IO_IEXC1_IOUT1_IEXC2_IOUT2 0 /* IEXC1 connect to IOUT1,
+ * IEXC2 connect to IOUT2 */
+#define AD7793_IO_IEXC1_IOUT2_IEXC2_IOUT1 1 /* IEXC1 connect to IOUT2,
+ * IEXC2 connect to IOUT1 */
+#define AD7793_IO_IEXC1_IEXC2_IOUT1 2 /* Both current sources
+ * IEXC1,2 connect to IOUT1 */
+#define AD7793_IO_IEXC1_IEXC2_IOUT2 3 /* Both current sources
+ * IEXC1,2 connect to IOUT2 */
+
+#define AD7793_IO_IXCEN_10uA (1 << 0) /* Excitation Current 10uA */
+#define AD7793_IO_IXCEN_210uA (2 << 0) /* Excitation Current 210uA */
+#define AD7793_IO_IXCEN_1mA (3 << 0) /* Excitation Current 1mA */
+
+/* NOTE:
+ * The AD7792/AD7793 features a dual use data out ready DOUT/RDY output.
+ * In order to avoid contentions on the SPI bus, it's therefore necessary
+ * to use spi bus locking.
+ *
+ * The DOUT/RDY output must also be wired to an interrupt capable GPIO.
+ */
+
+#define AD7793_FLAG_HAS_CLKSEL BIT(0)
+#define AD7793_FLAG_HAS_REFSEL BIT(1)
+#define AD7793_FLAG_HAS_VBIAS BIT(2)
+#define AD7793_HAS_EXITATION_CURRENT BIT(3)
+#define AD7793_FLAG_HAS_GAIN BIT(4)
+#define AD7793_FLAG_HAS_BUFFER BIT(5)
+
+struct ad7793_chip_info {
+ unsigned int id;
+ const struct iio_chan_spec *channels;
+ unsigned int num_channels;
+ unsigned int flags;
+
+ const struct iio_info *iio_info;
+ const u16 *sample_freq_avail;
+};
+
+struct ad7793_state {
+ const struct ad7793_chip_info *chip_info;
+ struct regulator *reg;
+ u16 int_vref_mv;
+ u16 mode;
+ u16 conf;
+ u32 scale_avail[8][2];
+
+ struct ad_sigma_delta sd;
+
+};
+
+enum ad7793_supported_device_ids {
+ ID_AD7785,
+ ID_AD7792,
+ ID_AD7793,
+ ID_AD7794,
+ ID_AD7795,
+ ID_AD7796,
+ ID_AD7797,
+ ID_AD7798,
+ ID_AD7799,
+};
+
+static struct ad7793_state *ad_sigma_delta_to_ad7793(struct ad_sigma_delta *sd)
+{
+ return container_of(sd, struct ad7793_state, sd);
+}
+
+static int ad7793_set_channel(struct ad_sigma_delta *sd, unsigned int channel)
+{
+ struct ad7793_state *st = ad_sigma_delta_to_ad7793(sd);
+
+ st->conf &= ~AD7793_CONF_CHAN_MASK;
+ st->conf |= AD7793_CONF_CHAN(channel);
+
+ return ad_sd_write_reg(&st->sd, AD7793_REG_CONF, 2, st->conf);
+}
+
+static int ad7793_set_mode(struct ad_sigma_delta *sd,
+ enum ad_sigma_delta_mode mode)
+{
+ struct ad7793_state *st = ad_sigma_delta_to_ad7793(sd);
+
+ st->mode &= ~AD7793_MODE_SEL_MASK;
+ st->mode |= AD7793_MODE_SEL(mode);
+
+ return ad_sd_write_reg(&st->sd, AD7793_REG_MODE, 2, st->mode);
+}
+
+static const struct ad_sigma_delta_info ad7793_sigma_delta_info = {
+ .set_channel = ad7793_set_channel,
+ .set_mode = ad7793_set_mode,
+ .has_registers = true,
+ .addr_shift = 3,
+ .read_mask = BIT(6),
+};
+
+static const struct ad_sd_calib_data ad7793_calib_arr[6] = {
+ {AD7793_MODE_CAL_INT_ZERO, AD7793_CH_AIN1P_AIN1M},
+ {AD7793_MODE_CAL_INT_FULL, AD7793_CH_AIN1P_AIN1M},
+ {AD7793_MODE_CAL_INT_ZERO, AD7793_CH_AIN2P_AIN2M},
+ {AD7793_MODE_CAL_INT_FULL, AD7793_CH_AIN2P_AIN2M},
+ {AD7793_MODE_CAL_INT_ZERO, AD7793_CH_AIN3P_AIN3M},
+ {AD7793_MODE_CAL_INT_FULL, AD7793_CH_AIN3P_AIN3M}
+};
+
+static int ad7793_calibrate_all(struct ad7793_state *st)
+{
+ return ad_sd_calibrate_all(&st->sd, ad7793_calib_arr,
+ ARRAY_SIZE(ad7793_calib_arr));
+}
+
+static int ad7793_check_platform_data(struct ad7793_state *st,
+ const struct ad7793_platform_data *pdata)
+{
+ if ((pdata->current_source_direction == AD7793_IEXEC1_IEXEC2_IOUT1 ||
+ pdata->current_source_direction == AD7793_IEXEC1_IEXEC2_IOUT2) &&
+ ((pdata->exitation_current != AD7793_IX_10uA) &&
+ (pdata->exitation_current != AD7793_IX_210uA)))
+ return -EINVAL;
+
+ if (!(st->chip_info->flags & AD7793_FLAG_HAS_CLKSEL) &&
+ pdata->clock_src != AD7793_CLK_SRC_INT)
+ return -EINVAL;
+
+ if (!(st->chip_info->flags & AD7793_FLAG_HAS_REFSEL) &&
+ pdata->refsel != AD7793_REFSEL_REFIN1)
+ return -EINVAL;
+
+ if (!(st->chip_info->flags & AD7793_FLAG_HAS_VBIAS) &&
+ pdata->bias_voltage != AD7793_BIAS_VOLTAGE_DISABLED)
+ return -EINVAL;
+
+ if (!(st->chip_info->flags & AD7793_HAS_EXITATION_CURRENT) &&
+ pdata->exitation_current != AD7793_IX_DISABLED)
+ return -EINVAL;
+
+ return 0;
+}
+
+static int ad7793_setup(struct iio_dev *indio_dev,
+ const struct ad7793_platform_data *pdata,
+ unsigned int vref_mv)
+{
+ struct ad7793_state *st = iio_priv(indio_dev);
+ int i, ret = -1;
+ unsigned long long scale_uv;
+ u32 id;
+
+ ret = ad7793_check_platform_data(st, pdata);
+ if (ret)
+ return ret;
+
+ /* reset the serial interface */
+ ret = spi_write(st->sd.spi, (u8 *)&ret, sizeof(ret));
+ if (ret < 0)
+ goto out;
+ usleep_range(500, 2000); /* Wait for at least 500us */
+
+ /* write/read test for device presence */
+ ret = ad_sd_read_reg(&st->sd, AD7793_REG_ID, 1, &id);
+ if (ret)
+ goto out;
+
+ id &= AD7793_ID_MASK;
+
+ if (id != st->chip_info->id) {
+ dev_err(&st->sd.spi->dev, "device ID query failed\n");
+ goto out;
+ }
+
+ st->mode = AD7793_MODE_RATE(1);
+ st->conf = 0;
+
+ if (st->chip_info->flags & AD7793_FLAG_HAS_CLKSEL)
+ st->mode |= AD7793_MODE_CLKSRC(pdata->clock_src);
+ if (st->chip_info->flags & AD7793_FLAG_HAS_REFSEL)
+ st->conf |= AD7793_CONF_REFSEL(pdata->refsel);
+ if (st->chip_info->flags & AD7793_FLAG_HAS_VBIAS)
+ st->conf |= AD7793_CONF_VBIAS(pdata->bias_voltage);
+ if (pdata->buffered || !(st->chip_info->flags & AD7793_FLAG_HAS_BUFFER))
+ st->conf |= AD7793_CONF_BUF;
+ if (pdata->boost_enable &&
+ (st->chip_info->flags & AD7793_FLAG_HAS_VBIAS))
+ st->conf |= AD7793_CONF_BOOST;
+ if (pdata->burnout_current)
+ st->conf |= AD7793_CONF_BO_EN;
+ if (pdata->unipolar)
+ st->conf |= AD7793_CONF_UNIPOLAR;
+
+ if (!(st->chip_info->flags & AD7793_FLAG_HAS_GAIN))
+ st->conf |= AD7793_CONF_GAIN(7);
+
+ ret = ad7793_set_mode(&st->sd, AD_SD_MODE_IDLE);
+ if (ret)
+ goto out;
+
+ ret = ad7793_set_channel(&st->sd, 0);
+ if (ret)
+ goto out;
+
+ if (st->chip_info->flags & AD7793_HAS_EXITATION_CURRENT) {
+ ret = ad_sd_write_reg(&st->sd, AD7793_REG_IO, 1,
+ pdata->exitation_current |
+ (pdata->current_source_direction << 2));
+ if (ret)
+ goto out;
+ }
+
+ ret = ad7793_calibrate_all(st);
+ if (ret)
+ goto out;
+
+ /* Populate available ADC input ranges */
+ for (i = 0; i < ARRAY_SIZE(st->scale_avail); i++) {
+ scale_uv = ((u64)vref_mv * 100000000)
+ >> (st->chip_info->channels[0].scan_type.realbits -
+ (!!(st->conf & AD7793_CONF_UNIPOLAR) ? 0 : 1));
+ scale_uv >>= i;
+
+ st->scale_avail[i][1] = do_div(scale_uv, 100000000) * 10;
+ st->scale_avail[i][0] = scale_uv;
+ }
+
+ return 0;
+out:
+ dev_err(&st->sd.spi->dev, "setup failed\n");
+ return ret;
+}
+
+static const u16 ad7793_sample_freq_avail[16] = {0, 470, 242, 123, 62, 50, 39,
+ 33, 19, 17, 16, 12, 10, 8, 6, 4};
+
+static const u16 ad7797_sample_freq_avail[16] = {0, 0, 0, 123, 62, 50, 0,
+ 33, 0, 17, 16, 12, 10, 8, 6, 4};
+
+static ssize_t ad7793_read_frequency(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+ struct ad7793_state *st = iio_priv(indio_dev);
+
+ return sprintf(buf, "%d\n",
+ st->chip_info->sample_freq_avail[AD7793_MODE_RATE(st->mode)]);
+}
+
+static ssize_t ad7793_write_frequency(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t len)
+{
+ struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+ struct ad7793_state *st = iio_priv(indio_dev);
+ long lval;
+ int i, ret;
+
+ mutex_lock(&indio_dev->mlock);
+ if (iio_buffer_enabled(indio_dev)) {
+ mutex_unlock(&indio_dev->mlock);
+ return -EBUSY;
+ }
+ mutex_unlock(&indio_dev->mlock);
+
+ ret = kstrtol(buf, 10, &lval);
+ if (ret)
+ return ret;
+
+ if (lval == 0)
+ return -EINVAL;
+
+ ret = -EINVAL;
+
+ for (i = 0; i < 16; i++)
+ if (lval == st->chip_info->sample_freq_avail[i]) {
+ mutex_lock(&indio_dev->mlock);
+ st->mode &= ~AD7793_MODE_RATE(-1);
+ st->mode |= AD7793_MODE_RATE(i);
+ ad_sd_write_reg(&st->sd, AD7793_REG_MODE,
+ sizeof(st->mode), st->mode);
+ mutex_unlock(&indio_dev->mlock);
+ ret = 0;
+ }
+
+ return ret ? ret : len;
+}
+
+static IIO_DEV_ATTR_SAMP_FREQ(S_IWUSR | S_IRUGO,
+ ad7793_read_frequency,
+ ad7793_write_frequency);
+
+static IIO_CONST_ATTR_SAMP_FREQ_AVAIL(
+ "470 242 123 62 50 39 33 19 17 16 12 10 8 6 4");
+
+static IIO_CONST_ATTR_NAMED(sampling_frequency_available_ad7797,
+ sampling_frequency_available, "123 62 50 33 17 16 12 10 8 6 4");
+
+static ssize_t ad7793_show_scale_available(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+ struct ad7793_state *st = iio_priv(indio_dev);
+ int i, len = 0;
+
+ for (i = 0; i < ARRAY_SIZE(st->scale_avail); i++)
+ len += sprintf(buf + len, "%d.%09u ", st->scale_avail[i][0],
+ st->scale_avail[i][1]);
+
+ len += sprintf(buf + len, "\n");
+
+ return len;
+}
+
+static IIO_DEVICE_ATTR_NAMED(in_m_in_scale_available,
+ in_voltage-voltage_scale_available, S_IRUGO,
+ ad7793_show_scale_available, NULL, 0);
+
+static struct attribute *ad7793_attributes[] = {
+ &iio_dev_attr_sampling_frequency.dev_attr.attr,
+ &iio_const_attr_sampling_frequency_available.dev_attr.attr,
+ &iio_dev_attr_in_m_in_scale_available.dev_attr.attr,
+ NULL
+};
+
+static const struct attribute_group ad7793_attribute_group = {
+ .attrs = ad7793_attributes,
+};
+
+static struct attribute *ad7797_attributes[] = {
+ &iio_dev_attr_sampling_frequency.dev_attr.attr,
+ &iio_const_attr_sampling_frequency_available_ad7797.dev_attr.attr,
+ NULL
+};
+
+static const struct attribute_group ad7797_attribute_group = {
+ .attrs = ad7797_attributes,
+};
+
+static int ad7793_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val,
+ int *val2,
+ long m)
+{
+ struct ad7793_state *st = iio_priv(indio_dev);
+ int ret;
+ unsigned long long scale_uv;
+ bool unipolar = !!(st->conf & AD7793_CONF_UNIPOLAR);
+
+ switch (m) {
+ case IIO_CHAN_INFO_RAW:
+ ret = ad_sigma_delta_single_conversion(indio_dev, chan, val);
+ if (ret < 0)
+ return ret;
+
+ return IIO_VAL_INT;
+
+ case IIO_CHAN_INFO_SCALE:
+ switch (chan->type) {
+ case IIO_VOLTAGE:
+ if (chan->differential) {
+ *val = st->
+ scale_avail[(st->conf >> 8) & 0x7][0];
+ *val2 = st->
+ scale_avail[(st->conf >> 8) & 0x7][1];
+ return IIO_VAL_INT_PLUS_NANO;
+ } else {
+ /* 1170mV / 2^23 * 6 */
+ scale_uv = (1170ULL * 1000000000ULL * 6ULL);
+ }
+ break;
+ case IIO_TEMP:
+ /* 1170mV / 0.81 mV/C / 2^23 */
+ scale_uv = 1444444444444444ULL;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ scale_uv >>= (chan->scan_type.realbits - (unipolar ? 0 : 1));
+ *val = 0;
+ *val2 = scale_uv;
+ return IIO_VAL_INT_PLUS_NANO;
+ case IIO_CHAN_INFO_OFFSET:
+ if (!unipolar)
+ *val = -(1 << (chan->scan_type.realbits - 1));
+ else
+ *val = 0;
+
+ /* Kelvin to Celsius */
+ if (chan->type == IIO_TEMP) {
+ unsigned long long offset;
+ unsigned int shift;
+
+ shift = chan->scan_type.realbits - (unipolar ? 0 : 1);
+ offset = 273ULL << shift;
+ do_div(offset, 1444);
+ *val -= offset;
+ }
+ return IIO_VAL_INT;
+ }
+ return -EINVAL;
+}
+
+static int ad7793_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int val,
+ int val2,
+ long mask)
+{
+ struct ad7793_state *st = iio_priv(indio_dev);
+ int ret, i;
+ unsigned int tmp;
+
+ mutex_lock(&indio_dev->mlock);
+ if (iio_buffer_enabled(indio_dev)) {
+ mutex_unlock(&indio_dev->mlock);
+ return -EBUSY;
+ }
+
+ switch (mask) {
+ case IIO_CHAN_INFO_SCALE:
+ ret = -EINVAL;
+ for (i = 0; i < ARRAY_SIZE(st->scale_avail); i++)
+ if (val2 == st->scale_avail[i][1]) {
+ ret = 0;
+ tmp = st->conf;
+ st->conf &= ~AD7793_CONF_GAIN(-1);
+ st->conf |= AD7793_CONF_GAIN(i);
+
+ if (tmp == st->conf)
+ break;
+
+ ad_sd_write_reg(&st->sd, AD7793_REG_CONF,
+ sizeof(st->conf), st->conf);
+ ad7793_calibrate_all(st);
+ break;
+ }
+ break;
+ default:
+ ret = -EINVAL;
+ }
+
+ mutex_unlock(&indio_dev->mlock);
+ return ret;
+}
+
+static int ad7793_write_raw_get_fmt(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ long mask)
+{
+ return IIO_VAL_INT_PLUS_NANO;
+}
+
+static const struct iio_info ad7793_info = {
+ .read_raw = &ad7793_read_raw,
+ .write_raw = &ad7793_write_raw,
+ .write_raw_get_fmt = &ad7793_write_raw_get_fmt,
+ .attrs = &ad7793_attribute_group,
+ .validate_trigger = ad_sd_validate_trigger,
+ .driver_module = THIS_MODULE,
+};
+
+static const struct iio_info ad7797_info = {
+ .read_raw = &ad7793_read_raw,
+ .write_raw = &ad7793_write_raw,
+ .write_raw_get_fmt = &ad7793_write_raw_get_fmt,
+ .attrs = &ad7793_attribute_group,
+ .validate_trigger = ad_sd_validate_trigger,
+ .driver_module = THIS_MODULE,
+};
+
+#define DECLARE_AD7793_CHANNELS(_name, _b, _sb, _s) \
+const struct iio_chan_spec _name##_channels[] = { \
+ AD_SD_DIFF_CHANNEL(0, 0, 0, AD7793_CH_AIN1P_AIN1M, (_b), (_sb), (_s)), \
+ AD_SD_DIFF_CHANNEL(1, 1, 1, AD7793_CH_AIN2P_AIN2M, (_b), (_sb), (_s)), \
+ AD_SD_DIFF_CHANNEL(2, 2, 2, AD7793_CH_AIN3P_AIN3M, (_b), (_sb), (_s)), \
+ AD_SD_SHORTED_CHANNEL(3, 0, AD7793_CH_AIN1M_AIN1M, (_b), (_sb), (_s)), \
+ AD_SD_TEMP_CHANNEL(4, AD7793_CH_TEMP, (_b), (_sb), (_s)), \
+ AD_SD_SUPPLY_CHANNEL(5, 3, AD7793_CH_AVDD_MONITOR, (_b), (_sb), (_s)), \
+ IIO_CHAN_SOFT_TIMESTAMP(6), \
+}
+
+#define DECLARE_AD7795_CHANNELS(_name, _b, _sb) \
+const struct iio_chan_spec _name##_channels[] = { \
+ AD_SD_DIFF_CHANNEL(0, 0, 0, AD7793_CH_AIN1P_AIN1M, (_b), (_sb), 0), \
+ AD_SD_DIFF_CHANNEL(1, 1, 1, AD7793_CH_AIN2P_AIN2M, (_b), (_sb), 0), \
+ AD_SD_DIFF_CHANNEL(2, 2, 2, AD7793_CH_AIN3P_AIN3M, (_b), (_sb), 0), \
+ AD_SD_DIFF_CHANNEL(3, 3, 3, AD7795_CH_AIN4P_AIN4M, (_b), (_sb), 0), \
+ AD_SD_DIFF_CHANNEL(4, 4, 4, AD7795_CH_AIN5P_AIN5M, (_b), (_sb), 0), \
+ AD_SD_DIFF_CHANNEL(5, 5, 5, AD7795_CH_AIN6P_AIN6M, (_b), (_sb), 0), \
+ AD_SD_SHORTED_CHANNEL(6, 0, AD7795_CH_AIN1M_AIN1M, (_b), (_sb), 0), \
+ AD_SD_TEMP_CHANNEL(7, AD7793_CH_TEMP, (_b), (_sb), 0), \
+ AD_SD_SUPPLY_CHANNEL(8, 3, AD7793_CH_AVDD_MONITOR, (_b), (_sb), 0), \
+ IIO_CHAN_SOFT_TIMESTAMP(9), \
+}
+
+#define DECLARE_AD7797_CHANNELS(_name, _b, _sb) \
+const struct iio_chan_spec _name##_channels[] = { \
+ AD_SD_DIFF_CHANNEL(0, 0, 0, AD7793_CH_AIN1P_AIN1M, (_b), (_sb), 0), \
+ AD_SD_SHORTED_CHANNEL(1, 0, AD7793_CH_AIN1M_AIN1M, (_b), (_sb), 0), \
+ AD_SD_TEMP_CHANNEL(2, AD7793_CH_TEMP, (_b), (_sb), 0), \
+ AD_SD_SUPPLY_CHANNEL(3, 3, AD7793_CH_AVDD_MONITOR, (_b), (_sb), 0), \
+ IIO_CHAN_SOFT_TIMESTAMP(4), \
+}
+
+#define DECLARE_AD7799_CHANNELS(_name, _b, _sb) \
+const struct iio_chan_spec _name##_channels[] = { \
+ AD_SD_DIFF_CHANNEL(0, 0, 0, AD7793_CH_AIN1P_AIN1M, (_b), (_sb), 0), \
+ AD_SD_DIFF_CHANNEL(1, 1, 1, AD7793_CH_AIN2P_AIN2M, (_b), (_sb), 0), \
+ AD_SD_DIFF_CHANNEL(2, 2, 2, AD7793_CH_AIN3P_AIN3M, (_b), (_sb), 0), \
+ AD_SD_SHORTED_CHANNEL(3, 0, AD7793_CH_AIN1M_AIN1M, (_b), (_sb), 0), \
+ AD_SD_SUPPLY_CHANNEL(4, 3, AD7793_CH_AVDD_MONITOR, (_b), (_sb), 0), \
+ IIO_CHAN_SOFT_TIMESTAMP(5), \
+}
+
+static DECLARE_AD7793_CHANNELS(ad7785, 20, 32, 4);
+static DECLARE_AD7793_CHANNELS(ad7792, 16, 32, 0);
+static DECLARE_AD7793_CHANNELS(ad7793, 24, 32, 0);
+static DECLARE_AD7795_CHANNELS(ad7794, 16, 32);
+static DECLARE_AD7795_CHANNELS(ad7795, 24, 32);
+static DECLARE_AD7797_CHANNELS(ad7796, 16, 16);
+static DECLARE_AD7797_CHANNELS(ad7797, 24, 32);
+static DECLARE_AD7799_CHANNELS(ad7798, 16, 16);
+static DECLARE_AD7799_CHANNELS(ad7799, 24, 32);
+
+static const struct ad7793_chip_info ad7793_chip_info_tbl[] = {
+ [ID_AD7785] = {
+ .id = AD7785_ID,
+ .channels = ad7785_channels,
+ .num_channels = ARRAY_SIZE(ad7785_channels),
+ .iio_info = &ad7793_info,
+ .sample_freq_avail = ad7793_sample_freq_avail,
+ .flags = AD7793_FLAG_HAS_CLKSEL |
+ AD7793_FLAG_HAS_REFSEL |
+ AD7793_FLAG_HAS_VBIAS |
+ AD7793_HAS_EXITATION_CURRENT |
+ AD7793_FLAG_HAS_GAIN |
+ AD7793_FLAG_HAS_BUFFER,
+ },
+ [ID_AD7792] = {
+ .id = AD7792_ID,
+ .channels = ad7792_channels,
+ .num_channels = ARRAY_SIZE(ad7792_channels),
+ .iio_info = &ad7793_info,
+ .sample_freq_avail = ad7793_sample_freq_avail,
+ .flags = AD7793_FLAG_HAS_CLKSEL |
+ AD7793_FLAG_HAS_REFSEL |
+ AD7793_FLAG_HAS_VBIAS |
+ AD7793_HAS_EXITATION_CURRENT |
+ AD7793_FLAG_HAS_GAIN |
+ AD7793_FLAG_HAS_BUFFER,
+ },
+ [ID_AD7793] = {
+ .id = AD7793_ID,
+ .channels = ad7793_channels,
+ .num_channels = ARRAY_SIZE(ad7793_channels),
+ .iio_info = &ad7793_info,
+ .sample_freq_avail = ad7793_sample_freq_avail,
+ .flags = AD7793_FLAG_HAS_CLKSEL |
+ AD7793_FLAG_HAS_REFSEL |
+ AD7793_FLAG_HAS_VBIAS |
+ AD7793_HAS_EXITATION_CURRENT |
+ AD7793_FLAG_HAS_GAIN |
+ AD7793_FLAG_HAS_BUFFER,
+ },
+ [ID_AD7794] = {
+ .id = AD7794_ID,
+ .channels = ad7794_channels,
+ .num_channels = ARRAY_SIZE(ad7794_channels),
+ .iio_info = &ad7793_info,
+ .sample_freq_avail = ad7793_sample_freq_avail,
+ .flags = AD7793_FLAG_HAS_CLKSEL |
+ AD7793_FLAG_HAS_REFSEL |
+ AD7793_FLAG_HAS_VBIAS |
+ AD7793_HAS_EXITATION_CURRENT |
+ AD7793_FLAG_HAS_GAIN |
+ AD7793_FLAG_HAS_BUFFER,
+ },
+ [ID_AD7795] = {
+ .id = AD7795_ID,
+ .channels = ad7795_channels,
+ .num_channels = ARRAY_SIZE(ad7795_channels),
+ .iio_info = &ad7793_info,
+ .sample_freq_avail = ad7793_sample_freq_avail,
+ .flags = AD7793_FLAG_HAS_CLKSEL |
+ AD7793_FLAG_HAS_REFSEL |
+ AD7793_FLAG_HAS_VBIAS |
+ AD7793_HAS_EXITATION_CURRENT |
+ AD7793_FLAG_HAS_GAIN |
+ AD7793_FLAG_HAS_BUFFER,
+ },
+ [ID_AD7796] = {
+ .id = AD7796_ID,
+ .channels = ad7796_channels,
+ .num_channels = ARRAY_SIZE(ad7796_channels),
+ .iio_info = &ad7797_info,
+ .sample_freq_avail = ad7797_sample_freq_avail,
+ .flags = AD7793_FLAG_HAS_CLKSEL,
+ },
+ [ID_AD7797] = {
+ .id = AD7797_ID,
+ .channels = ad7797_channels,
+ .num_channels = ARRAY_SIZE(ad7797_channels),
+ .iio_info = &ad7797_info,
+ .sample_freq_avail = ad7797_sample_freq_avail,
+ .flags = AD7793_FLAG_HAS_CLKSEL,
+ },
+ [ID_AD7798] = {
+ .id = AD7798_ID,
+ .channels = ad7798_channels,
+ .num_channels = ARRAY_SIZE(ad7798_channels),
+ .iio_info = &ad7793_info,
+ .sample_freq_avail = ad7793_sample_freq_avail,
+ .flags = AD7793_FLAG_HAS_GAIN |
+ AD7793_FLAG_HAS_BUFFER,
+ },
+ [ID_AD7799] = {
+ .id = AD7799_ID,
+ .channels = ad7799_channels,
+ .num_channels = ARRAY_SIZE(ad7799_channels),
+ .iio_info = &ad7793_info,
+ .sample_freq_avail = ad7793_sample_freq_avail,
+ .flags = AD7793_FLAG_HAS_GAIN |
+ AD7793_FLAG_HAS_BUFFER,
+ },
+};
+
+static int ad7793_probe(struct spi_device *spi)
+{
+ const struct ad7793_platform_data *pdata = spi->dev.platform_data;
+ struct ad7793_state *st;
+ struct iio_dev *indio_dev;
+ int ret, vref_mv = 0;
+
+ if (!pdata) {
+ dev_err(&spi->dev, "no platform data?\n");
+ return -ENODEV;
+ }
+
+ if (!spi->irq) {
+ dev_err(&spi->dev, "no IRQ?\n");
+ return -ENODEV;
+ }
+
+ indio_dev = iio_device_alloc(sizeof(*st));
+ if (indio_dev == NULL)
+ return -ENOMEM;
+
+ st = iio_priv(indio_dev);
+
+ ad_sd_init(&st->sd, indio_dev, spi, &ad7793_sigma_delta_info);
+
+ if (pdata->refsel != AD7793_REFSEL_INTERNAL) {
+ st->reg = regulator_get(&spi->dev, "refin");
+ if (IS_ERR(st->reg)) {
+ ret = PTR_ERR(st->reg);
+ goto error_device_free;
+ }
+
+ ret = regulator_enable(st->reg);
+ if (ret)
+ goto error_put_reg;
+
+ vref_mv = regulator_get_voltage(st->reg);
+ if (vref_mv < 0) {
+ ret = vref_mv;
+ goto error_disable_reg;
+ }
+
+ vref_mv /= 1000;
+ } else {
+ vref_mv = 1170; /* Build-in ref */
+ }
+
+ st->chip_info =
+ &ad7793_chip_info_tbl[spi_get_device_id(spi)->driver_data];
+
+ spi_set_drvdata(spi, indio_dev);
+
+ indio_dev->dev.parent = &spi->dev;
+ indio_dev->name = spi_get_device_id(spi)->name;
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->channels = st->chip_info->channels;
+ indio_dev->num_channels = st->chip_info->num_channels;
+ indio_dev->info = st->chip_info->iio_info;
+
+ ret = ad_sd_setup_buffer_and_trigger(indio_dev);
+ if (ret)
+ goto error_disable_reg;
+
+ ret = ad7793_setup(indio_dev, pdata, vref_mv);
+ if (ret)
+ goto error_remove_trigger;
+
+ ret = iio_device_register(indio_dev);
+ if (ret)
+ goto error_remove_trigger;
+
+ return 0;
+
+error_remove_trigger:
+ ad_sd_cleanup_buffer_and_trigger(indio_dev);
+error_disable_reg:
+ if (pdata->refsel != AD7793_REFSEL_INTERNAL)
+ regulator_disable(st->reg);
+error_put_reg:
+ if (pdata->refsel != AD7793_REFSEL_INTERNAL)
+ regulator_put(st->reg);
+error_device_free:
+ iio_device_free(indio_dev);
+
+ return ret;
+}
+
+static int ad7793_remove(struct spi_device *spi)
+{
+ const struct ad7793_platform_data *pdata = spi->dev.platform_data;
+ struct iio_dev *indio_dev = spi_get_drvdata(spi);
+ struct ad7793_state *st = iio_priv(indio_dev);
+
+ iio_device_unregister(indio_dev);
+ ad_sd_cleanup_buffer_and_trigger(indio_dev);
+
+ if (pdata->refsel != AD7793_REFSEL_INTERNAL) {
+ regulator_disable(st->reg);
+ regulator_put(st->reg);
+ }
+
+ iio_device_free(indio_dev);
+
+ return 0;
+}
+
+static const struct spi_device_id ad7793_id[] = {
+ {"ad7785", ID_AD7785},
+ {"ad7792", ID_AD7792},
+ {"ad7793", ID_AD7793},
+ {"ad7794", ID_AD7794},
+ {"ad7795", ID_AD7795},
+ {"ad7796", ID_AD7796},
+ {"ad7797", ID_AD7797},
+ {"ad7798", ID_AD7798},
+ {"ad7799", ID_AD7799},
+ {}
+};
+MODULE_DEVICE_TABLE(spi, ad7793_id);
+
+static struct spi_driver ad7793_driver = {
+ .driver = {
+ .name = "ad7793",
+ .owner = THIS_MODULE,
+ },
+ .probe = ad7793_probe,
+ .remove = ad7793_remove,
+ .id_table = ad7793_id,
+};
+module_spi_driver(ad7793_driver);
+
+MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
+MODULE_DESCRIPTION("Analog Devices AD7793 and simialr ADCs");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/adc/ad7887.c b/drivers/iio/adc/ad7887.c
new file mode 100644
index 0000000..81153fa
--- /dev/null
+++ b/drivers/iio/adc/ad7887.c
@@ -0,0 +1,378 @@
+/*
+ * AD7887 SPI ADC driver
+ *
+ * Copyright 2010-2011 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/sysfs.h>
+#include <linux/spi/spi.h>
+#include <linux/regulator/consumer.h>
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/buffer.h>
+
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+
+#include <linux/platform_data/ad7887.h>
+
+#define AD7887_REF_DIS (1 << 5) /* on-chip reference disable */
+#define AD7887_DUAL (1 << 4) /* dual-channel mode */
+#define AD7887_CH_AIN1 (1 << 3) /* convert on channel 1, DUAL=1 */
+#define AD7887_CH_AIN0 (0 << 3) /* convert on channel 0, DUAL=0,1 */
+#define AD7887_PM_MODE1 (0) /* CS based shutdown */
+#define AD7887_PM_MODE2 (1) /* full on */
+#define AD7887_PM_MODE3 (2) /* auto shutdown after conversion */
+#define AD7887_PM_MODE4 (3) /* standby mode */
+
+enum ad7887_channels {
+ AD7887_CH0,
+ AD7887_CH0_CH1,
+ AD7887_CH1,
+};
+
+#define RES_MASK(bits) ((1 << (bits)) - 1)
+
+/**
+ * struct ad7887_chip_info - chip specifc information
+ * @int_vref_mv: the internal reference voltage
+ * @channel: channel specification
+ */
+struct ad7887_chip_info {
+ u16 int_vref_mv;
+ struct iio_chan_spec channel[3];
+};
+
+struct ad7887_state {
+ struct spi_device *spi;
+ const struct ad7887_chip_info *chip_info;
+ struct regulator *reg;
+ struct spi_transfer xfer[4];
+ struct spi_message msg[3];
+ struct spi_message *ring_msg;
+ unsigned char tx_cmd_buf[4];
+
+ /*
+ * DMA (thus cache coherency maintenance) requires the
+ * transfer buffers to live in their own cache lines.
+ * Buffer needs to be large enough to hold two 16 bit samples and a
+ * 64 bit aligned 64 bit timestamp.
+ */
+ unsigned char data[ALIGN(4, sizeof(s64)) + sizeof(s64)]
+ ____cacheline_aligned;
+};
+
+enum ad7887_supported_device_ids {
+ ID_AD7887
+};
+
+static int ad7887_ring_preenable(struct iio_dev *indio_dev)
+{
+ struct ad7887_state *st = iio_priv(indio_dev);
+ int ret;
+
+ ret = iio_sw_buffer_preenable(indio_dev);
+ if (ret < 0)
+ return ret;
+
+ /* We know this is a single long so can 'cheat' */
+ switch (*indio_dev->active_scan_mask) {
+ case (1 << 0):
+ st->ring_msg = &st->msg[AD7887_CH0];
+ break;
+ case (1 << 1):
+ st->ring_msg = &st->msg[AD7887_CH1];
+ /* Dummy read: push CH1 setting down to hardware */
+ spi_sync(st->spi, st->ring_msg);
+ break;
+ case ((1 << 1) | (1 << 0)):
+ st->ring_msg = &st->msg[AD7887_CH0_CH1];
+ break;
+ }
+
+ return 0;
+}
+
+static int ad7887_ring_postdisable(struct iio_dev *indio_dev)
+{
+ struct ad7887_state *st = iio_priv(indio_dev);
+
+ /* dummy read: restore default CH0 settin */
+ return spi_sync(st->spi, &st->msg[AD7887_CH0]);
+}
+
+/**
+ * ad7887_trigger_handler() bh of trigger launched polling to ring buffer
+ *
+ * Currently there is no option in this driver to disable the saving of
+ * timestamps within the ring.
+ **/
+static irqreturn_t ad7887_trigger_handler(int irq, void *p)
+{
+ struct iio_poll_func *pf = p;
+ struct iio_dev *indio_dev = pf->indio_dev;
+ struct ad7887_state *st = iio_priv(indio_dev);
+ s64 time_ns;
+ int b_sent;
+
+ b_sent = spi_sync(st->spi, st->ring_msg);
+ if (b_sent)
+ goto done;
+
+ time_ns = iio_get_time_ns();
+
+ if (indio_dev->scan_timestamp)
+ memcpy(st->data + indio_dev->scan_bytes - sizeof(s64),
+ &time_ns, sizeof(time_ns));
+
+ iio_push_to_buffers(indio_dev, st->data);
+done:
+ iio_trigger_notify_done(indio_dev->trig);
+
+ return IRQ_HANDLED;
+}
+
+static const struct iio_buffer_setup_ops ad7887_ring_setup_ops = {
+ .preenable = &ad7887_ring_preenable,
+ .postenable = &iio_triggered_buffer_postenable,
+ .predisable = &iio_triggered_buffer_predisable,
+ .postdisable = &ad7887_ring_postdisable,
+};
+
+static int ad7887_scan_direct(struct ad7887_state *st, unsigned ch)
+{
+ int ret = spi_sync(st->spi, &st->msg[ch]);
+ if (ret)
+ return ret;
+
+ return (st->data[(ch * 2)] << 8) | st->data[(ch * 2) + 1];
+}
+
+static int ad7887_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val,
+ int *val2,
+ long m)
+{
+ int ret;
+ struct ad7887_state *st = iio_priv(indio_dev);
+
+ switch (m) {
+ case IIO_CHAN_INFO_RAW:
+ mutex_lock(&indio_dev->mlock);
+ if (iio_buffer_enabled(indio_dev))
+ ret = -EBUSY;
+ else
+ ret = ad7887_scan_direct(st, chan->address);
+ mutex_unlock(&indio_dev->mlock);
+
+ if (ret < 0)
+ return ret;
+ *val = ret >> chan->scan_type.shift;
+ *val &= RES_MASK(chan->scan_type.realbits);
+ return IIO_VAL_INT;
+ case IIO_CHAN_INFO_SCALE:
+ if (st->reg) {
+ *val = regulator_get_voltage(st->reg);
+ if (*val < 0)
+ return *val;
+ *val /= 1000;
+ } else {
+ *val = st->chip_info->int_vref_mv;
+ }
+
+ *val2 = chan->scan_type.realbits;
+
+ return IIO_VAL_FRACTIONAL_LOG2;
+ }
+ return -EINVAL;
+}
+
+
+static const struct ad7887_chip_info ad7887_chip_info_tbl[] = {
+ /*
+ * More devices added in future
+ */
+ [ID_AD7887] = {
+ .channel[0] = {
+ .type = IIO_VOLTAGE,
+ .indexed = 1,
+ .channel = 1,
+ .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+ IIO_CHAN_INFO_SCALE_SHARED_BIT,
+ .address = 1,
+ .scan_index = 1,
+ .scan_type = IIO_ST('u', 12, 16, 0),
+ },
+ .channel[1] = {
+ .type = IIO_VOLTAGE,
+ .indexed = 1,
+ .channel = 0,
+ .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+ IIO_CHAN_INFO_SCALE_SHARED_BIT,
+ .address = 0,
+ .scan_index = 0,
+ .scan_type = IIO_ST('u', 12, 16, 0),
+ },
+ .channel[2] = IIO_CHAN_SOFT_TIMESTAMP(2),
+ .int_vref_mv = 2500,
+ },
+};
+
+static const struct iio_info ad7887_info = {
+ .read_raw = &ad7887_read_raw,
+ .driver_module = THIS_MODULE,
+};
+
+static int __devinit ad7887_probe(struct spi_device *spi)
+{
+ struct ad7887_platform_data *pdata = spi->dev.platform_data;
+ struct ad7887_state *st;
+ struct iio_dev *indio_dev = iio_device_alloc(sizeof(*st));
+ uint8_t mode;
+ int ret;
+
+ if (indio_dev == NULL)
+ return -ENOMEM;
+
+ st = iio_priv(indio_dev);
+
+ if (!pdata || !pdata->use_onchip_ref) {
+ st->reg = regulator_get(&spi->dev, "vref");
+ if (IS_ERR(st->reg)) {
+ ret = PTR_ERR(st->reg);
+ goto error_free;
+ }
+
+ ret = regulator_enable(st->reg);
+ if (ret)
+ goto error_put_reg;
+ }
+
+ st->chip_info =
+ &ad7887_chip_info_tbl[spi_get_device_id(spi)->driver_data];
+
+ spi_set_drvdata(spi, indio_dev);
+ st->spi = spi;
+
+ /* Estabilish that the iio_dev is a child of the spi device */
+ indio_dev->dev.parent = &spi->dev;
+ indio_dev->name = spi_get_device_id(spi)->name;
+ indio_dev->info = &ad7887_info;
+ indio_dev->modes = INDIO_DIRECT_MODE;
+
+ /* Setup default message */
+
+ mode = AD7887_PM_MODE4;
+ if (!pdata || !pdata->use_onchip_ref)
+ mode |= AD7887_REF_DIS;
+ if (pdata && pdata->en_dual)
+ mode |= AD7887_DUAL;
+
+ st->tx_cmd_buf[0] = AD7887_CH_AIN0 | mode;
+
+ st->xfer[0].rx_buf = &st->data[0];
+ st->xfer[0].tx_buf = &st->tx_cmd_buf[0];
+ st->xfer[0].len = 2;
+
+ spi_message_init(&st->msg[AD7887_CH0]);
+ spi_message_add_tail(&st->xfer[0], &st->msg[AD7887_CH0]);
+
+ if (pdata && pdata->en_dual) {
+ st->tx_cmd_buf[2] = AD7887_CH_AIN1 | mode;
+
+ st->xfer[1].rx_buf = &st->data[0];
+ st->xfer[1].tx_buf = &st->tx_cmd_buf[2];
+ st->xfer[1].len = 2;
+
+ st->xfer[2].rx_buf = &st->data[2];
+ st->xfer[2].tx_buf = &st->tx_cmd_buf[0];
+ st->xfer[2].len = 2;
+
+ spi_message_init(&st->msg[AD7887_CH0_CH1]);
+ spi_message_add_tail(&st->xfer[1], &st->msg[AD7887_CH0_CH1]);
+ spi_message_add_tail(&st->xfer[2], &st->msg[AD7887_CH0_CH1]);
+
+ st->xfer[3].rx_buf = &st->data[2];
+ st->xfer[3].tx_buf = &st->tx_cmd_buf[2];
+ st->xfer[3].len = 2;
+
+ spi_message_init(&st->msg[AD7887_CH1]);
+ spi_message_add_tail(&st->xfer[3], &st->msg[AD7887_CH1]);
+
+ indio_dev->channels = st->chip_info->channel;
+ indio_dev->num_channels = 3;
+ } else {
+ indio_dev->channels = &st->chip_info->channel[1];
+ indio_dev->num_channels = 2;
+ }
+
+ ret = iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time,
+ &ad7887_trigger_handler, &ad7887_ring_setup_ops);
+ if (ret)
+ goto error_disable_reg;
+
+ ret = iio_device_register(indio_dev);
+ if (ret)
+ goto error_unregister_ring;
+
+ return 0;
+error_unregister_ring:
+ iio_triggered_buffer_cleanup(indio_dev);
+error_disable_reg:
+ if (st->reg)
+ regulator_disable(st->reg);
+error_put_reg:
+ if (st->reg)
+ regulator_put(st->reg);
+error_free:
+ iio_device_free(indio_dev);
+
+ return ret;
+}
+
+static int __devexit ad7887_remove(struct spi_device *spi)
+{
+ struct iio_dev *indio_dev = spi_get_drvdata(spi);
+ struct ad7887_state *st = iio_priv(indio_dev);
+
+ iio_device_unregister(indio_dev);
+ iio_triggered_buffer_cleanup(indio_dev);
+ if (st->reg) {
+ regulator_disable(st->reg);
+ regulator_put(st->reg);
+ }
+ iio_device_free(indio_dev);
+
+ return 0;
+}
+
+static const struct spi_device_id ad7887_id[] = {
+ {"ad7887", ID_AD7887},
+ {}
+};
+MODULE_DEVICE_TABLE(spi, ad7887_id);
+
+static struct spi_driver ad7887_driver = {
+ .driver = {
+ .name = "ad7887",
+ .owner = THIS_MODULE,
+ },
+ .probe = ad7887_probe,
+ .remove = __devexit_p(ad7887_remove),
+ .id_table = ad7887_id,
+};
+module_spi_driver(ad7887_driver);
+
+MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
+MODULE_DESCRIPTION("Analog Devices AD7887 ADC");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/adc/ad_sigma_delta.c b/drivers/iio/adc/ad_sigma_delta.c
index 67baa13..afe6d78 100644
--- a/drivers/iio/adc/ad_sigma_delta.c
+++ b/drivers/iio/adc/ad_sigma_delta.c
@@ -391,7 +391,7 @@
break;
}
- iio_push_to_buffer(indio_dev->buffer, (uint8_t *)data);
+ iio_push_to_buffers(indio_dev, (uint8_t *)data);
iio_trigger_notify_done(indio_dev->trig);
sigma_delta->irq_dis = false;
diff --git a/drivers/iio/adc/at91_adc.c b/drivers/iio/adc/at91_adc.c
index 3ed94bf..03b8594 100644
--- a/drivers/iio/adc/at91_adc.c
+++ b/drivers/iio/adc/at91_adc.c
@@ -46,7 +46,6 @@
struct clk *clk;
bool done;
int irq;
- bool irq_enabled;
u16 last_value;
struct mutex lock;
u8 num_channels;
@@ -66,7 +65,6 @@
struct iio_poll_func *pf = p;
struct iio_dev *idev = pf->indio_dev;
struct at91_adc_state *st = iio_priv(idev);
- struct iio_buffer *buffer = idev->buffer;
int i, j = 0;
for (i = 0; i < idev->masklength; i++) {
@@ -82,10 +80,9 @@
*timestamp = pf->timestamp;
}
- buffer->access->store_to(buffer, (u8 *)st->buffer);
+ iio_push_to_buffers(indio_dev, (u8 *)st->buffer);
iio_trigger_notify_done(idev->trig);
- st->irq_enabled = true;
/* Needed to ACK the DRDY interruption */
at91_adc_readl(st, AT91_ADC_LCDR);
@@ -106,7 +103,6 @@
if (iio_buffer_enabled(idev)) {
disable_irq_nosync(irq);
- st->irq_enabled = false;
iio_trigger_poll(idev->trig, iio_get_time_ns());
} else {
st->last_value = at91_adc_readl(st, AT91_ADC_LCDR);
diff --git a/drivers/staging/iio/adc/max1363_core.c b/drivers/iio/adc/max1363.c
similarity index 81%
rename from drivers/staging/iio/adc/max1363_core.c
rename to drivers/iio/adc/max1363.c
index d7b4ffc..1e84b5b 100644
--- a/drivers/staging/iio/adc/max1363_core.c
+++ b/drivers/iio/adc/max1363.c
@@ -37,8 +37,151 @@
#include <linux/iio/events.h>
#include <linux/iio/buffer.h>
#include <linux/iio/driver.h>
+#include <linux/iio/kfifo_buf.h>
+#include <linux/iio/trigger_consumer.h>
-#include "max1363.h"
+#define MAX1363_SETUP_BYTE(a) ((a) | 0x80)
+
+/* There is a fair bit more defined here than currently
+ * used, but the intention is to support everything these
+ * chips do in the long run */
+
+/* see data sheets */
+/* max1363 and max1236, max1237, max1238, max1239 */
+#define MAX1363_SETUP_AIN3_IS_AIN3_REF_IS_VDD 0x00
+#define MAX1363_SETUP_AIN3_IS_REF_EXT_TO_REF 0x20
+#define MAX1363_SETUP_AIN3_IS_AIN3_REF_IS_INT 0x40
+#define MAX1363_SETUP_AIN3_IS_REF_REF_IS_INT 0x60
+#define MAX1363_SETUP_POWER_UP_INT_REF 0x10
+#define MAX1363_SETUP_POWER_DOWN_INT_REF 0x00
+
+/* think about includeing max11600 etc - more settings */
+#define MAX1363_SETUP_EXT_CLOCK 0x08
+#define MAX1363_SETUP_INT_CLOCK 0x00
+#define MAX1363_SETUP_UNIPOLAR 0x00
+#define MAX1363_SETUP_BIPOLAR 0x04
+#define MAX1363_SETUP_RESET 0x00
+#define MAX1363_SETUP_NORESET 0x02
+/* max1363 only - though don't care on others.
+ * For now monitor modes are not implemented as the relevant
+ * line is not connected on my test board.
+ * The definitions are here as I intend to add this soon.
+ */
+#define MAX1363_SETUP_MONITOR_SETUP 0x01
+
+/* Specific to the max1363 */
+#define MAX1363_MON_RESET_CHAN(a) (1 << ((a) + 4))
+#define MAX1363_MON_INT_ENABLE 0x01
+
+/* defined for readability reasons */
+/* All chips */
+#define MAX1363_CONFIG_BYTE(a) ((a))
+
+#define MAX1363_CONFIG_SE 0x01
+#define MAX1363_CONFIG_DE 0x00
+#define MAX1363_CONFIG_SCAN_TO_CS 0x00
+#define MAX1363_CONFIG_SCAN_SINGLE_8 0x20
+#define MAX1363_CONFIG_SCAN_MONITOR_MODE 0x40
+#define MAX1363_CONFIG_SCAN_SINGLE_1 0x60
+/* max123{6-9} only */
+#define MAX1236_SCAN_MID_TO_CHANNEL 0x40
+
+/* max1363 only - merely part of channel selects or don't care for others*/
+#define MAX1363_CONFIG_EN_MON_MODE_READ 0x18
+
+#define MAX1363_CHANNEL_SEL(a) ((a) << 1)
+
+/* max1363 strictly 0x06 - but doesn't matter */
+#define MAX1363_CHANNEL_SEL_MASK 0x1E
+#define MAX1363_SCAN_MASK 0x60
+#define MAX1363_SE_DE_MASK 0x01
+
+#define MAX1363_MAX_CHANNELS 25
+/**
+ * struct max1363_mode - scan mode information
+ * @conf: The corresponding value of the configuration register
+ * @modemask: Bit mask corresponding to channels enabled in this mode
+ */
+struct max1363_mode {
+ int8_t conf;
+ DECLARE_BITMAP(modemask, MAX1363_MAX_CHANNELS);
+};
+
+/* This must be maintained along side the max1363_mode_table in max1363_core */
+enum max1363_modes {
+ /* Single read of a single channel */
+ _s0, _s1, _s2, _s3, _s4, _s5, _s6, _s7, _s8, _s9, _s10, _s11,
+ /* Differential single read */
+ d0m1, d2m3, d4m5, d6m7, d8m9, d10m11,
+ d1m0, d3m2, d5m4, d7m6, d9m8, d11m10,
+ /* Scan to channel and mid to channel where overlapping */
+ s0to1, s0to2, s2to3, s0to3, s0to4, s0to5, s0to6,
+ s6to7, s0to7, s6to8, s0to8, s6to9,
+ s0to9, s6to10, s0to10, s6to11, s0to11,
+ /* Differential scan to channel and mid to channel where overlapping */
+ d0m1to2m3, d0m1to4m5, d0m1to6m7, d6m7to8m9,
+ d0m1to8m9, d6m7to10m11, d0m1to10m11, d1m0to3m2,
+ d1m0to5m4, d1m0to7m6, d7m6to9m8, d1m0to9m8,
+ d7m6to11m10, d1m0to11m10,
+};
+
+/**
+ * struct max1363_chip_info - chip specifc information
+ * @info: iio core function callbacks structure
+ * @channels: channel specification
+ * @num_channels: number of channels
+ * @mode_list: array of available scan modes
+ * @default_mode: the scan mode in which the chip starts up
+ * @int_vref_mv: the internal reference voltage
+ * @num_channels: number of channels
+ * @bits: accuracy of the adc in bits
+ */
+struct max1363_chip_info {
+ const struct iio_info *info;
+ const struct iio_chan_spec *channels;
+ int num_channels;
+ const enum max1363_modes *mode_list;
+ enum max1363_modes default_mode;
+ u16 int_vref_mv;
+ u8 num_modes;
+ u8 bits;
+};
+
+/**
+ * struct max1363_state - driver instance specific data
+ * @client: i2c_client
+ * @setupbyte: cache of current device setup byte
+ * @configbyte: cache of current device config byte
+ * @chip_info: chip model specific constants, available modes etc
+ * @current_mode: the scan mode of this chip
+ * @requestedmask: a valid requested set of channels
+ * @reg: supply regulator
+ * @monitor_on: whether monitor mode is enabled
+ * @monitor_speed: parameter corresponding to device monitor speed setting
+ * @mask_high: bitmask for enabled high thresholds
+ * @mask_low: bitmask for enabled low thresholds
+ * @thresh_high: high threshold values
+ * @thresh_low: low threshold values
+ */
+struct max1363_state {
+ struct i2c_client *client;
+ u8 setupbyte;
+ u8 configbyte;
+ const struct max1363_chip_info *chip_info;
+ const struct max1363_mode *current_mode;
+ u32 requestedmask;
+ struct regulator *reg;
+
+ /* Using monitor modes and buffer at the same time is
+ currently not supported */
+ bool monitor_on;
+ unsigned int monitor_speed:3;
+ u8 mask_high;
+ u8 mask_low;
+ /* 4x unipolar first then the fours bipolar ones */
+ s16 thresh_high[8];
+ s16 thresh_low[8];
+};
#define MAX1363_MODE_SINGLE(_num, _mask) { \
.conf = MAX1363_CHANNEL_SEL(_num) \
@@ -148,7 +291,7 @@
MAX1363_MODE_DIFF_SCAN_TO_CHANNEL(11, 6, 0xFC0000),
};
-const struct max1363_mode
+static const struct max1363_mode
*max1363_match_mode(const unsigned long *mask,
const struct max1363_chip_info *ci)
{
@@ -172,7 +315,7 @@
return i2c_master_send(client, tx_buf, 2);
}
-int max1363_set_scan_mode(struct max1363_state *st)
+static int max1363_set_scan_mode(struct max1363_state *st)
{
st->configbyte &= ~(MAX1363_CHANNEL_SEL_MASK
| MAX1363_SCAN_MASK
@@ -622,9 +765,9 @@
u64 event_code)
{
struct max1363_state *st = iio_priv(indio_dev);
-
int val;
int number = IIO_EVENT_CODE_EXTRACT_CHAN(event_code);
+
mutex_lock(&indio_dev->mlock);
if (IIO_EVENT_CODE_EXTRACT_DIR(event_code) == IIO_EV_DIR_FALLING)
val = (1 << number) & st->mask_low;
@@ -644,7 +787,7 @@
const long *modemask;
if (!enabled) {
- /* transition to ring capture is not currently supported */
+ /* transition to buffered capture is not currently supported */
st->setupbyte &= ~MAX1363_SETUP_MONITOR_SETUP;
st->configbyte &= ~MAX1363_SCAN_MASK;
st->monitor_on = false;
@@ -826,8 +969,21 @@
.name = "events",
};
-#define MAX1363_EVENT_FUNCS \
+static int max1363_update_scan_mode(struct iio_dev *indio_dev,
+ const unsigned long *scan_mask)
+{
+ struct max1363_state *st = iio_priv(indio_dev);
+ /*
+ * Need to figure out the current mode based upon the requested
+ * scan mask in iio_dev
+ */
+ st->current_mode = max1363_match_mode(scan_mask, st->chip_info);
+ if (!st->current_mode)
+ return -EINVAL;
+ max1363_set_scan_mode(st);
+ return 0;
+}
static const struct iio_info max1238_info = {
.read_raw = &max1363_read_raw,
@@ -1230,8 +1386,6 @@
},
};
-
-
static int max1363_initial_setup(struct max1363_state *st)
{
st->setupbyte = MAX1363_SETUP_AIN3_IS_AIN3_REF_IS_VDD
@@ -1269,34 +1423,137 @@
return 0;
}
+
+static irqreturn_t max1363_trigger_handler(int irq, void *p)
+{
+ struct iio_poll_func *pf = p;
+ struct iio_dev *indio_dev = pf->indio_dev;
+ struct max1363_state *st = iio_priv(indio_dev);
+ s64 time_ns;
+ __u8 *rxbuf;
+ int b_sent;
+ size_t d_size;
+ unsigned long numvals = bitmap_weight(st->current_mode->modemask,
+ MAX1363_MAX_CHANNELS);
+
+ /* Ensure the timestamp is 8 byte aligned */
+ if (st->chip_info->bits != 8)
+ d_size = numvals*2;
+ else
+ d_size = numvals;
+ if (indio_dev->scan_timestamp) {
+ d_size += sizeof(s64);
+ if (d_size % sizeof(s64))
+ d_size += sizeof(s64) - (d_size % sizeof(s64));
+ }
+ /* Monitor mode prevents reading. Whilst not currently implemented
+ * might as well have this test in here in the meantime as it does
+ * no harm.
+ */
+ if (numvals == 0)
+ goto done;
+
+ rxbuf = kmalloc(d_size, GFP_KERNEL);
+ if (rxbuf == NULL)
+ goto done;
+ if (st->chip_info->bits != 8)
+ b_sent = i2c_master_recv(st->client, rxbuf, numvals*2);
+ else
+ b_sent = i2c_master_recv(st->client, rxbuf, numvals);
+ if (b_sent < 0)
+ goto done_free;
+
+ time_ns = iio_get_time_ns();
+
+ if (indio_dev->scan_timestamp)
+ memcpy(rxbuf + d_size - sizeof(s64), &time_ns, sizeof(time_ns));
+ iio_push_to_buffers(indio_dev, rxbuf);
+
+done_free:
+ kfree(rxbuf);
+done:
+ iio_trigger_notify_done(indio_dev->trig);
+
+ return IRQ_HANDLED;
+}
+
+static const struct iio_buffer_setup_ops max1363_buffered_setup_ops = {
+ .postenable = &iio_triggered_buffer_postenable,
+ .preenable = &iio_sw_buffer_preenable,
+ .predisable = &iio_triggered_buffer_predisable,
+};
+
+static int max1363_register_buffered_funcs_and_init(struct iio_dev *indio_dev)
+{
+ struct max1363_state *st = iio_priv(indio_dev);
+ int ret = 0;
+
+ indio_dev->buffer = iio_kfifo_allocate(indio_dev);
+ if (!indio_dev->buffer) {
+ ret = -ENOMEM;
+ goto error_ret;
+ }
+ indio_dev->pollfunc = iio_alloc_pollfunc(NULL,
+ &max1363_trigger_handler,
+ IRQF_ONESHOT,
+ indio_dev,
+ "%s_consumer%d",
+ st->client->name,
+ indio_dev->id);
+ if (indio_dev->pollfunc == NULL) {
+ ret = -ENOMEM;
+ goto error_deallocate_sw_rb;
+ }
+ /* Buffer functions - here trigger setup related */
+ indio_dev->setup_ops = &max1363_buffered_setup_ops;
+
+ /* Flag that polled buffering is possible */
+ indio_dev->modes |= INDIO_BUFFER_TRIGGERED;
+
+ return 0;
+
+error_deallocate_sw_rb:
+ iio_kfifo_free(indio_dev->buffer);
+error_ret:
+ return ret;
+}
+
+static void max1363_buffer_cleanup(struct iio_dev *indio_dev)
+{
+ /* ensure that the trigger has been detached */
+ iio_dealloc_pollfunc(indio_dev->pollfunc);
+ iio_kfifo_free(indio_dev->buffer);
+}
+
static int __devinit max1363_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
int ret;
struct max1363_state *st;
struct iio_dev *indio_dev;
- struct regulator *reg;
-
- reg = regulator_get(&client->dev, "vcc");
- if (IS_ERR(reg)) {
- ret = PTR_ERR(reg);
- goto error_out;
- }
-
- ret = regulator_enable(reg);
- if (ret)
- goto error_put_reg;
indio_dev = iio_device_alloc(sizeof(struct max1363_state));
if (indio_dev == NULL) {
ret = -ENOMEM;
- goto error_disable_reg;
+ goto error_out;
}
+
ret = iio_map_array_register(indio_dev, client->dev.platform_data);
if (ret < 0)
goto error_free_device;
+
st = iio_priv(indio_dev);
- st->reg = reg;
+
+ st->reg = regulator_get(&client->dev, "vcc");
+ if (IS_ERR(st->reg)) {
+ ret = PTR_ERR(st->reg);
+ goto error_unregister_map;
+ }
+
+ ret = regulator_enable(st->reg);
+ if (ret)
+ goto error_put_reg;
+
/* this is only used for device removal purposes */
i2c_set_clientdata(client, indio_dev);
@@ -1305,7 +1562,7 @@
ret = max1363_alloc_scan_masks(indio_dev);
if (ret)
- goto error_unregister_map;
+ goto error_disable_reg;
/* Estabilish that the iio_dev is a child of the i2c device */
indio_dev->dev.parent = &client->dev;
@@ -1320,7 +1577,7 @@
if (ret < 0)
goto error_free_available_scan_masks;
- ret = max1363_register_ring_funcs_and_init(indio_dev);
+ ret = max1363_register_buffered_funcs_and_init(indio_dev);
if (ret)
goto error_free_available_scan_masks;
@@ -1328,7 +1585,7 @@
st->chip_info->channels,
st->chip_info->num_channels);
if (ret)
- goto error_cleanup_ring;
+ goto error_cleanup_buffer;
if (client->irq) {
ret = request_threaded_irq(st->client->irq,
@@ -1339,7 +1596,7 @@
indio_dev);
if (ret)
- goto error_uninit_ring;
+ goto error_uninit_buffer;
}
ret = iio_device_register(indio_dev);
@@ -1349,20 +1606,20 @@
return 0;
error_free_irq:
free_irq(st->client->irq, indio_dev);
-error_uninit_ring:
+error_uninit_buffer:
iio_buffer_unregister(indio_dev);
-error_cleanup_ring:
- max1363_ring_cleanup(indio_dev);
+error_cleanup_buffer:
+ max1363_buffer_cleanup(indio_dev);
error_free_available_scan_masks:
kfree(indio_dev->available_scan_masks);
error_unregister_map:
iio_map_array_unregister(indio_dev, client->dev.platform_data);
+error_disable_reg:
+ regulator_disable(st->reg);
+error_put_reg:
+ regulator_put(st->reg);
error_free_device:
iio_device_free(indio_dev);
-error_disable_reg:
- regulator_disable(reg);
-error_put_reg:
- regulator_put(reg);
error_out:
return ret;
}
@@ -1371,17 +1628,16 @@
{
struct iio_dev *indio_dev = i2c_get_clientdata(client);
struct max1363_state *st = iio_priv(indio_dev);
- struct regulator *reg = st->reg;
iio_device_unregister(indio_dev);
if (client->irq)
free_irq(st->client->irq, indio_dev);
iio_buffer_unregister(indio_dev);
- max1363_ring_cleanup(indio_dev);
+ max1363_buffer_cleanup(indio_dev);
kfree(indio_dev->available_scan_masks);
- if (!IS_ERR(reg)) {
- regulator_disable(reg);
- regulator_put(reg);
+ if (!IS_ERR(st->reg)) {
+ regulator_disable(st->reg);
+ regulator_put(st->reg);
}
iio_map_array_unregister(indio_dev, client->dev.platform_data);
iio_device_free(indio_dev);
diff --git a/drivers/iio/adc/ti-adc081c.c b/drivers/iio/adc/ti-adc081c.c
new file mode 100644
index 0000000..f4a46dd
--- /dev/null
+++ b/drivers/iio/adc/ti-adc081c.c
@@ -0,0 +1,161 @@
+/*
+ * Copyright (C) 2012 Avionic Design GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+
+#include <linux/iio/iio.h>
+#include <linux/regulator/consumer.h>
+
+struct adc081c {
+ struct i2c_client *i2c;
+ struct regulator *ref;
+};
+
+#define REG_CONV_RES 0x00
+
+static int adc081c_read_raw(struct iio_dev *iio,
+ struct iio_chan_spec const *channel, int *value,
+ int *shift, long mask)
+{
+ struct adc081c *adc = iio_priv(iio);
+ int err;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ err = i2c_smbus_read_word_swapped(adc->i2c, REG_CONV_RES);
+ if (err < 0)
+ return err;
+
+ *value = (err >> 4) & 0xff;
+ return IIO_VAL_INT;
+
+ case IIO_CHAN_INFO_SCALE:
+ err = regulator_get_voltage(adc->ref);
+ if (err < 0)
+ return err;
+
+ *value = err / 1000;
+ *shift = 8;
+
+ return IIO_VAL_FRACTIONAL_LOG2;
+
+ default:
+ break;
+ }
+
+ return -EINVAL;
+}
+
+static const struct iio_chan_spec adc081c_channel = {
+ .type = IIO_VOLTAGE,
+ .info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT |
+ IIO_CHAN_INFO_RAW_SEPARATE_BIT,
+};
+
+static const struct iio_info adc081c_info = {
+ .read_raw = adc081c_read_raw,
+ .driver_module = THIS_MODULE,
+};
+
+static int adc081c_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct iio_dev *iio;
+ struct adc081c *adc;
+ int err;
+
+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA))
+ return -ENODEV;
+
+ iio = iio_device_alloc(sizeof(*adc));
+ if (!iio)
+ return -ENOMEM;
+
+ adc = iio_priv(iio);
+ adc->i2c = client;
+
+ adc->ref = regulator_get(&client->dev, "vref");
+ if (IS_ERR(adc->ref)) {
+ err = PTR_ERR(adc->ref);
+ goto iio_free;
+ }
+
+ err = regulator_enable(adc->ref);
+ if (err < 0)
+ goto regulator_put;
+
+ iio->dev.parent = &client->dev;
+ iio->name = dev_name(&client->dev);
+ iio->modes = INDIO_DIRECT_MODE;
+ iio->info = &adc081c_info;
+
+ iio->channels = &adc081c_channel;
+ iio->num_channels = 1;
+
+ err = iio_device_register(iio);
+ if (err < 0)
+ goto regulator_disable;
+
+ i2c_set_clientdata(client, iio);
+
+ return 0;
+
+regulator_disable:
+ regulator_disable(adc->ref);
+regulator_put:
+ regulator_put(adc->ref);
+iio_free:
+ iio_device_free(iio);
+
+ return err;
+}
+
+static int adc081c_remove(struct i2c_client *client)
+{
+ struct iio_dev *iio = i2c_get_clientdata(client);
+ struct adc081c *adc = iio_priv(iio);
+
+ iio_device_unregister(iio);
+ regulator_disable(adc->ref);
+ regulator_put(adc->ref);
+ iio_device_free(iio);
+
+ return 0;
+}
+
+static const struct i2c_device_id adc081c_id[] = {
+ { "adc081c", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, adc081c_id);
+
+#ifdef CONFIG_OF
+static const struct of_device_id adc081c_of_match[] = {
+ { .compatible = "ti,adc081c" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, adc081c_of_match);
+#endif
+
+static struct i2c_driver adc081c_driver = {
+ .driver = {
+ .name = "adc081c",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(adc081c_of_match),
+ },
+ .probe = adc081c_probe,
+ .remove = adc081c_remove,
+ .id_table = adc081c_id,
+};
+module_i2c_driver(adc081c_driver);
+
+MODULE_AUTHOR("Thierry Reding <thierry.reding@avionic-design.de>");
+MODULE_DESCRIPTION("Texas Instruments ADC081C021/027 driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/buffer_cb.c b/drivers/iio/buffer_cb.c
new file mode 100644
index 0000000..4d40e24
--- /dev/null
+++ b/drivers/iio/buffer_cb.c
@@ -0,0 +1,113 @@
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/export.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/consumer.h>
+
+struct iio_cb_buffer {
+ struct iio_buffer buffer;
+ int (*cb)(u8 *data, void *private);
+ void *private;
+ struct iio_channel *channels;
+};
+
+static int iio_buffer_cb_store_to(struct iio_buffer *buffer, u8 *data)
+{
+ struct iio_cb_buffer *cb_buff = container_of(buffer,
+ struct iio_cb_buffer,
+ buffer);
+
+ return cb_buff->cb(data, cb_buff->private);
+}
+
+static struct iio_buffer_access_funcs iio_cb_access = {
+ .store_to = &iio_buffer_cb_store_to,
+};
+
+struct iio_cb_buffer *iio_channel_get_all_cb(const char *name,
+ int (*cb)(u8 *data,
+ void *private),
+ void *private)
+{
+ int ret;
+ struct iio_cb_buffer *cb_buff;
+ struct iio_dev *indio_dev;
+ struct iio_channel *chan;
+
+ cb_buff = kzalloc(sizeof(*cb_buff), GFP_KERNEL);
+ if (cb_buff == NULL) {
+ ret = -ENOMEM;
+ goto error_ret;
+ }
+
+ cb_buff->private = private;
+ cb_buff->cb = cb;
+ cb_buff->buffer.access = &iio_cb_access;
+ INIT_LIST_HEAD(&cb_buff->buffer.demux_list);
+
+ cb_buff->channels = iio_channel_get_all(name);
+ if (IS_ERR(cb_buff->channels)) {
+ ret = PTR_ERR(cb_buff->channels);
+ goto error_free_cb_buff;
+ }
+
+ indio_dev = cb_buff->channels[0].indio_dev;
+ cb_buff->buffer.scan_mask
+ = kcalloc(BITS_TO_LONGS(indio_dev->masklength), sizeof(long),
+ GFP_KERNEL);
+ if (cb_buff->buffer.scan_mask == NULL) {
+ ret = -ENOMEM;
+ goto error_release_channels;
+ }
+ chan = &cb_buff->channels[0];
+ while (chan->indio_dev) {
+ if (chan->indio_dev != indio_dev) {
+ ret = -EINVAL;
+ goto error_release_channels;
+ }
+ set_bit(chan->channel->scan_index,
+ cb_buff->buffer.scan_mask);
+ chan++;
+ }
+
+ return cb_buff;
+
+error_release_channels:
+ iio_channel_release_all(cb_buff->channels);
+error_free_cb_buff:
+ kfree(cb_buff);
+error_ret:
+ return ERR_PTR(ret);
+}
+EXPORT_SYMBOL_GPL(iio_channel_get_all_cb);
+
+int iio_channel_start_all_cb(struct iio_cb_buffer *cb_buff)
+{
+ return iio_update_buffers(cb_buff->channels[0].indio_dev,
+ &cb_buff->buffer,
+ NULL);
+}
+EXPORT_SYMBOL_GPL(iio_channel_start_all_cb);
+
+void iio_channel_stop_all_cb(struct iio_cb_buffer *cb_buff)
+{
+ iio_update_buffers(cb_buff->channels[0].indio_dev,
+ NULL,
+ &cb_buff->buffer);
+}
+EXPORT_SYMBOL_GPL(iio_channel_stop_all_cb);
+
+void iio_channel_release_all_cb(struct iio_cb_buffer *cb_buff)
+{
+ iio_channel_release_all(cb_buff->channels);
+ kfree(cb_buff);
+}
+EXPORT_SYMBOL_GPL(iio_channel_release_all_cb);
+
+struct iio_channel
+*iio_channel_cb_get_channels(const struct iio_cb_buffer *cb_buffer)
+{
+ return cb_buffer->channels;
+}
+EXPORT_SYMBOL_GPL(iio_channel_cb_get_channels);
diff --git a/drivers/iio/common/hid-sensors/Kconfig b/drivers/iio/common/hid-sensors/Kconfig
index 8e63d81..ae10778 100644
--- a/drivers/iio/common/hid-sensors/Kconfig
+++ b/drivers/iio/common/hid-sensors/Kconfig
@@ -15,7 +15,7 @@
attributes.
config HID_SENSOR_ENUM_BASE_QUIRKS
- tristate "ENUM base quirks for HID Sensor IIO drivers"
+ bool "ENUM base quirks for HID Sensor IIO drivers"
depends on HID_SENSOR_IIO_COMMON
help
Say yes here to build support for sensor hub FW using
diff --git a/drivers/iio/common/hid-sensors/hid-sensor-trigger.c b/drivers/iio/common/hid-sensors/hid-sensor-trigger.c
index d4b790d..d60198a 100644
--- a/drivers/iio/common/hid-sensors/hid-sensor-trigger.c
+++ b/drivers/iio/common/hid-sensors/hid-sensor-trigger.c
@@ -36,10 +36,8 @@
int state_val;
state_val = state ? 1 : 0;
-#if (defined CONFIG_HID_SENSOR_ENUM_BASE_QUIRKS) || \
- (defined CONFIG_HID_SENSOR_ENUM_BASE_QUIRKS_MODULE)
- ++state_val;
-#endif
+ if (IS_ENABLED(CONFIG_HID_SENSOR_ENUM_BASE_QUIRKS))
+ ++state_val;
st->data_ready = state;
sensor_hub_set_feature(st->hsdev, st->power_state.report_id,
st->power_state.index,
diff --git a/drivers/iio/dac/Kconfig b/drivers/iio/dac/Kconfig
index b1c0ee5..f4a6f08 100644
--- a/drivers/iio/dac/Kconfig
+++ b/drivers/iio/dac/Kconfig
@@ -67,6 +67,16 @@
To compile this driver as a module, choose M here: the
module will be called ad5446.
+config AD5449
+ tristate "Analog Device AD5449 and similar DACs driver"
+ depends on SPI_MASTER
+ help
+ Say yes here to build support for Analog Devices AD5415, AD5426, AD5429,
+ AD5432, AD5439, AD5443, AD5449 Digital to Analog Converters.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ad5449.
+
config AD5504
tristate "Analog Devices AD5504/AD5501 DAC SPI driver"
depends on SPI
@@ -122,7 +132,7 @@
config MAX517
tristate "Maxim MAX517/518/519 DAC driver"
- depends on I2C && EXPERIMENTAL
+ depends on I2C
help
If you say yes here you get support for the Maxim chips MAX517,
MAX518 and MAX519 (I2C 8-Bit DACs with rail-to-rail outputs).
diff --git a/drivers/iio/dac/Makefile b/drivers/iio/dac/Makefile
index c0d333b..5b528eb 100644
--- a/drivers/iio/dac/Makefile
+++ b/drivers/iio/dac/Makefile
@@ -9,6 +9,7 @@
obj-$(CONFIG_AD5064) += ad5064.o
obj-$(CONFIG_AD5504) += ad5504.o
obj-$(CONFIG_AD5446) += ad5446.o
+obj-$(CONFIG_AD5449) += ad5449.o
obj-$(CONFIG_AD5755) += ad5755.o
obj-$(CONFIG_AD5764) += ad5764.o
obj-$(CONFIG_AD5791) += ad5791.o
diff --git a/drivers/iio/dac/ad5449.c b/drivers/iio/dac/ad5449.c
new file mode 100644
index 0000000..0ee6f8e
--- /dev/null
+++ b/drivers/iio/dac/ad5449.c
@@ -0,0 +1,376 @@
+/*
+ * AD5415, AD5426, AD5429, AD5432, AD5439, AD5443, AD5449 Digital to Analog
+ * Converter driver.
+ *
+ * Copyright 2012 Analog Devices Inc.
+ * Author: Lars-Peter Clausen <lars@metafoo.de>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/spi/spi.h>
+#include <linux/slab.h>
+#include <linux/sysfs.h>
+#include <linux/regulator/consumer.h>
+#include <asm/unaligned.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+
+#include <linux/platform_data/ad5449.h>
+
+#define AD5449_MAX_CHANNELS 2
+#define AD5449_MAX_VREFS 2
+
+#define AD5449_CMD_NOOP 0x0
+#define AD5449_CMD_LOAD_AND_UPDATE(x) (0x1 + (x) * 3)
+#define AD5449_CMD_READ(x) (0x2 + (x) * 3)
+#define AD5449_CMD_LOAD(x) (0x3 + (x) * 3)
+#define AD5449_CMD_CTRL 13
+
+#define AD5449_CTRL_SDO_OFFSET 10
+#define AD5449_CTRL_DAISY_CHAIN BIT(9)
+#define AD5449_CTRL_HCLR_TO_MIDSCALE BIT(8)
+#define AD5449_CTRL_SAMPLE_RISING BIT(7)
+
+/**
+ * struct ad5449_chip_info - chip specific information
+ * @channels: Channel specification
+ * @num_channels: Number of channels
+ * @has_ctrl: Chip has a control register
+ */
+struct ad5449_chip_info {
+ const struct iio_chan_spec *channels;
+ unsigned int num_channels;
+ bool has_ctrl;
+};
+
+/**
+ * struct ad5449 - driver instance specific data
+ * @spi: the SPI device for this driver instance
+ * @chip_info: chip model specific constants, available modes etc
+ * @vref_reg: vref supply regulators
+ * @has_sdo: whether the SDO line is connected
+ * @dac_cache: Cache for the DAC values
+ * @data: spi transfer buffers
+ */
+struct ad5449 {
+ struct spi_device *spi;
+ const struct ad5449_chip_info *chip_info;
+ struct regulator_bulk_data vref_reg[AD5449_MAX_VREFS];
+
+ bool has_sdo;
+ uint16_t dac_cache[AD5449_MAX_CHANNELS];
+
+ /*
+ * DMA (thus cache coherency maintenance) requires the
+ * transfer buffers to live in their own cache lines.
+ */
+ __be16 data[2] ____cacheline_aligned;
+};
+
+enum ad5449_type {
+ ID_AD5426,
+ ID_AD5429,
+ ID_AD5432,
+ ID_AD5439,
+ ID_AD5443,
+ ID_AD5449,
+};
+
+static int ad5449_write(struct iio_dev *indio_dev, unsigned int addr,
+ unsigned int val)
+{
+ struct ad5449 *st = iio_priv(indio_dev);
+ int ret;
+
+ mutex_lock(&indio_dev->mlock);
+ st->data[0] = cpu_to_be16((addr << 12) | val);
+ ret = spi_write(st->spi, st->data, 2);
+ mutex_unlock(&indio_dev->mlock);
+
+ return ret;
+}
+
+static int ad5449_read(struct iio_dev *indio_dev, unsigned int addr,
+ unsigned int *val)
+{
+ struct ad5449 *st = iio_priv(indio_dev);
+ int ret;
+ struct spi_message msg;
+ struct spi_transfer t[] = {
+ {
+ .tx_buf = &st->data[0],
+ .len = 2,
+ .cs_change = 1,
+ }, {
+ .tx_buf = &st->data[1],
+ .rx_buf = &st->data[1],
+ .len = 2,
+ },
+ };
+
+ spi_message_init(&msg);
+ spi_message_add_tail(&t[0], &msg);
+ spi_message_add_tail(&t[1], &msg);
+
+ mutex_lock(&indio_dev->mlock);
+ st->data[0] = cpu_to_be16(addr << 12);
+ st->data[1] = cpu_to_be16(AD5449_CMD_NOOP);
+
+ ret = spi_sync(st->spi, &msg);
+ if (ret < 0)
+ goto out_unlock;
+
+ *val = be16_to_cpu(st->data[1]);
+
+out_unlock:
+ mutex_unlock(&indio_dev->mlock);
+ return ret;
+}
+
+static int ad5449_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan, int *val, int *val2, long info)
+{
+ struct ad5449 *st = iio_priv(indio_dev);
+ struct regulator_bulk_data *reg;
+ int scale_uv;
+ int ret;
+
+ switch (info) {
+ case IIO_CHAN_INFO_RAW:
+ if (st->has_sdo) {
+ ret = ad5449_read(indio_dev,
+ AD5449_CMD_READ(chan->address), val);
+ if (ret)
+ return ret;
+ *val &= 0xfff;
+ } else {
+ *val = st->dac_cache[chan->address];
+ }
+
+ return IIO_VAL_INT;
+ case IIO_CHAN_INFO_SCALE:
+ reg = &st->vref_reg[chan->channel];
+ scale_uv = regulator_get_voltage(reg->consumer);
+ if (scale_uv < 0)
+ return scale_uv;
+
+ *val = scale_uv / 1000;
+ *val2 = chan->scan_type.realbits;
+
+ return IIO_VAL_FRACTIONAL_LOG2;
+ default:
+ break;
+ }
+
+ return -EINVAL;
+}
+
+static int ad5449_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan, int val, int val2, long info)
+{
+ struct ad5449 *st = iio_priv(indio_dev);
+ int ret;
+
+ switch (info) {
+ case IIO_CHAN_INFO_RAW:
+ if (val < 0 || val >= (1 << chan->scan_type.realbits))
+ return -EINVAL;
+
+ ret = ad5449_write(indio_dev,
+ AD5449_CMD_LOAD_AND_UPDATE(chan->address),
+ val << chan->scan_type.shift);
+ if (ret == 0)
+ st->dac_cache[chan->address] = val;
+ break;
+ default:
+ ret = -EINVAL;
+ }
+
+ return ret;
+}
+
+static const struct iio_info ad5449_info = {
+ .read_raw = ad5449_read_raw,
+ .write_raw = ad5449_write_raw,
+ .driver_module = THIS_MODULE,
+};
+
+#define AD5449_CHANNEL(chan, bits) { \
+ .type = IIO_VOLTAGE, \
+ .indexed = 1, \
+ .output = 1, \
+ .channel = (chan), \
+ .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | \
+ IIO_CHAN_INFO_SCALE_SEPARATE_BIT, \
+ .address = (chan), \
+ .scan_type = IIO_ST('u', (bits), 16, 12 - (bits)), \
+}
+
+#define DECLARE_AD5449_CHANNELS(name, bits) \
+const struct iio_chan_spec name[] = { \
+ AD5449_CHANNEL(0, bits), \
+ AD5449_CHANNEL(1, bits), \
+}
+
+static DECLARE_AD5449_CHANNELS(ad5429_channels, 8);
+static DECLARE_AD5449_CHANNELS(ad5439_channels, 10);
+static DECLARE_AD5449_CHANNELS(ad5449_channels, 12);
+
+static const struct ad5449_chip_info ad5449_chip_info[] = {
+ [ID_AD5426] = {
+ .channels = ad5429_channels,
+ .num_channels = 1,
+ .has_ctrl = false,
+ },
+ [ID_AD5429] = {
+ .channels = ad5429_channels,
+ .num_channels = 2,
+ .has_ctrl = true,
+ },
+ [ID_AD5432] = {
+ .channels = ad5439_channels,
+ .num_channels = 1,
+ .has_ctrl = false,
+ },
+ [ID_AD5439] = {
+ .channels = ad5439_channels,
+ .num_channels = 2,
+ .has_ctrl = true,
+ },
+ [ID_AD5443] = {
+ .channels = ad5449_channels,
+ .num_channels = 1,
+ .has_ctrl = false,
+ },
+ [ID_AD5449] = {
+ .channels = ad5449_channels,
+ .num_channels = 2,
+ .has_ctrl = true,
+ },
+};
+
+static const char *ad5449_vref_name(struct ad5449 *st, int n)
+{
+ if (st->chip_info->num_channels == 1)
+ return "VREF";
+
+ if (n == 0)
+ return "VREFA";
+ else
+ return "VREFB";
+}
+
+static int __devinit ad5449_spi_probe(struct spi_device *spi)
+{
+ struct ad5449_platform_data *pdata = spi->dev.platform_data;
+ const struct spi_device_id *id = spi_get_device_id(spi);
+ struct iio_dev *indio_dev;
+ struct ad5449 *st;
+ unsigned int i;
+ int ret;
+
+ indio_dev = iio_device_alloc(sizeof(*st));
+ if (indio_dev == NULL)
+ return -ENOMEM;
+
+ st = iio_priv(indio_dev);
+ spi_set_drvdata(spi, indio_dev);
+
+ st->chip_info = &ad5449_chip_info[id->driver_data];
+ st->spi = spi;
+
+ for (i = 0; i < st->chip_info->num_channels; ++i)
+ st->vref_reg[i].supply = ad5449_vref_name(st, i);
+
+ ret = regulator_bulk_get(&spi->dev, st->chip_info->num_channels,
+ st->vref_reg);
+ if (ret)
+ goto error_free;
+
+ ret = regulator_bulk_enable(st->chip_info->num_channels, st->vref_reg);
+ if (ret)
+ goto error_free_reg;
+
+ indio_dev->dev.parent = &spi->dev;
+ indio_dev->name = id->name;
+ indio_dev->info = &ad5449_info;
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->channels = st->chip_info->channels;
+ indio_dev->num_channels = st->chip_info->num_channels;
+
+ if (st->chip_info->has_ctrl) {
+ unsigned int ctrl = 0x00;
+ if (pdata) {
+ if (pdata->hardware_clear_to_midscale)
+ ctrl |= AD5449_CTRL_HCLR_TO_MIDSCALE;
+ ctrl |= pdata->sdo_mode << AD5449_CTRL_SDO_OFFSET;
+ st->has_sdo = pdata->sdo_mode != AD5449_SDO_DISABLED;
+ } else {
+ st->has_sdo = true;
+ }
+ ad5449_write(indio_dev, AD5449_CMD_CTRL, ctrl);
+ }
+
+ ret = iio_device_register(indio_dev);
+ if (ret)
+ goto error_disable_reg;
+
+ return 0;
+
+error_disable_reg:
+ regulator_bulk_disable(st->chip_info->num_channels, st->vref_reg);
+error_free_reg:
+ regulator_bulk_free(st->chip_info->num_channels, st->vref_reg);
+error_free:
+ iio_device_free(indio_dev);
+
+ return ret;
+}
+
+static int __devexit ad5449_spi_remove(struct spi_device *spi)
+{
+ struct iio_dev *indio_dev = spi_get_drvdata(spi);
+ struct ad5449 *st = iio_priv(indio_dev);
+
+ iio_device_unregister(indio_dev);
+
+ regulator_bulk_disable(st->chip_info->num_channels, st->vref_reg);
+ regulator_bulk_free(st->chip_info->num_channels, st->vref_reg);
+
+ iio_device_free(indio_dev);
+
+ return 0;
+}
+
+static const struct spi_device_id ad5449_spi_ids[] = {
+ { "ad5415", ID_AD5449 },
+ { "ad5426", ID_AD5426 },
+ { "ad5429", ID_AD5429 },
+ { "ad5432", ID_AD5432 },
+ { "ad5439", ID_AD5439 },
+ { "ad5443", ID_AD5443 },
+ { "ad5449", ID_AD5449 },
+ {}
+};
+MODULE_DEVICE_TABLE(spi, ad5449_spi_ids);
+
+static struct spi_driver ad5449_spi_driver = {
+ .driver = {
+ .name = "ad5449",
+ .owner = THIS_MODULE,
+ },
+ .probe = ad5449_spi_probe,
+ .remove = __devexit_p(ad5449_spi_remove),
+ .id_table = ad5449_spi_ids,
+};
+module_spi_driver(ad5449_spi_driver);
+
+MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
+MODULE_DESCRIPTION("Analog Devices AD5449 and similar DACs");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/dac/ad5686.c b/drivers/iio/dac/ad5686.c
index 6948d75..bc92ff9 100644
--- a/drivers/iio/dac/ad5686.c
+++ b/drivers/iio/dac/ad5686.c
@@ -188,7 +188,7 @@
if (ret)
return ret;
- if (readin == true)
+ if (readin)
st->pwr_down_mask |= (0x3 << (chan->channel * 2));
else
st->pwr_down_mask &= ~(0x3 << (chan->channel * 2));
diff --git a/drivers/iio/gyro/Kconfig b/drivers/iio/gyro/Kconfig
index 21e27e2..48ed148 100644
--- a/drivers/iio/gyro/Kconfig
+++ b/drivers/iio/gyro/Kconfig
@@ -3,6 +3,15 @@
#
menu "Digital gyroscope sensors"
+config ADIS16136
+ tristate "Analog devices ADIS16136 and similar gyroscopes driver"
+ depends on SPI_MASTER
+ select IIO_ADIS_LIB
+ select IIO_ADIS_LIB_BUFFER if IIO_BUFFER
+ help
+ Say yes here to build support for the Analog Devices ADIS16133, ADIS16135,
+ ADIS16136 gyroscope devices.
+
config HID_SENSOR_GYRO_3D
depends on HID_SENSOR_HUB
select IIO_BUFFER
diff --git a/drivers/iio/gyro/Makefile b/drivers/iio/gyro/Makefile
index 8a895d9..702a058 100644
--- a/drivers/iio/gyro/Makefile
+++ b/drivers/iio/gyro/Makefile
@@ -2,4 +2,5 @@
# Makefile for industrial I/O gyroscope sensor drivers
#
+obj-$(CONFIG_ADIS16136) += adis16136.o
obj-$(CONFIG_HID_SENSOR_GYRO_3D) += hid-sensor-gyro-3d.o
diff --git a/drivers/iio/gyro/adis16136.c b/drivers/iio/gyro/adis16136.c
new file mode 100644
index 0000000..8cb0bcb
--- /dev/null
+++ b/drivers/iio/gyro/adis16136.c
@@ -0,0 +1,580 @@
+/*
+ * ADIS16133/ADIS16135/ADIS16136 gyroscope driver
+ *
+ * Copyright 2012 Analog Devices Inc.
+ * Author: Lars-Peter Clausen <lars@metafoo.de>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/mutex.h>
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/spi/spi.h>
+#include <linux/slab.h>
+#include <linux/sysfs.h>
+#include <linux/module.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/imu/adis.h>
+
+#include <linux/debugfs.h>
+
+#define ADIS16136_REG_FLASH_CNT 0x00
+#define ADIS16136_REG_TEMP_OUT 0x02
+#define ADIS16136_REG_GYRO_OUT2 0x04
+#define ADIS16136_REG_GYRO_OUT 0x06
+#define ADIS16136_REG_GYRO_OFF2 0x08
+#define ADIS16136_REG_GYRO_OFF 0x0A
+#define ADIS16136_REG_ALM_MAG1 0x10
+#define ADIS16136_REG_ALM_MAG2 0x12
+#define ADIS16136_REG_ALM_SAMPL1 0x14
+#define ADIS16136_REG_ALM_SAMPL2 0x16
+#define ADIS16136_REG_ALM_CTRL 0x18
+#define ADIS16136_REG_GPIO_CTRL 0x1A
+#define ADIS16136_REG_MSC_CTRL 0x1C
+#define ADIS16136_REG_SMPL_PRD 0x1E
+#define ADIS16136_REG_AVG_CNT 0x20
+#define ADIS16136_REG_DEC_RATE 0x22
+#define ADIS16136_REG_SLP_CTRL 0x24
+#define ADIS16136_REG_DIAG_STAT 0x26
+#define ADIS16136_REG_GLOB_CMD 0x28
+#define ADIS16136_REG_LOT1 0x32
+#define ADIS16136_REG_LOT2 0x34
+#define ADIS16136_REG_LOT3 0x36
+#define ADIS16136_REG_PROD_ID 0x38
+#define ADIS16136_REG_SERIAL_NUM 0x3A
+
+#define ADIS16136_DIAG_STAT_FLASH_UPDATE_FAIL 2
+#define ADIS16136_DIAG_STAT_SPI_FAIL 3
+#define ADIS16136_DIAG_STAT_SELF_TEST_FAIL 5
+#define ADIS16136_DIAG_STAT_FLASH_CHKSUM_FAIL 6
+
+#define ADIS16136_MSC_CTRL_MEMORY_TEST BIT(11)
+#define ADIS16136_MSC_CTRL_SELF_TEST BIT(10)
+
+struct adis16136_chip_info {
+ unsigned int precision;
+ unsigned int fullscale;
+};
+
+struct adis16136 {
+ const struct adis16136_chip_info *chip_info;
+
+ struct adis adis;
+};
+
+#ifdef CONFIG_DEBUG_FS
+
+static ssize_t adis16136_show_serial(struct file *file,
+ char __user *userbuf, size_t count, loff_t *ppos)
+{
+ struct adis16136 *adis16136 = file->private_data;
+ uint16_t lot1, lot2, lot3, serial;
+ char buf[20];
+ size_t len;
+ int ret;
+
+ ret = adis_read_reg_16(&adis16136->adis, ADIS16136_REG_SERIAL_NUM,
+ &serial);
+ if (ret < 0)
+ return ret;
+
+ ret = adis_read_reg_16(&adis16136->adis, ADIS16136_REG_LOT1, &lot1);
+ if (ret < 0)
+ return ret;
+
+ ret = adis_read_reg_16(&adis16136->adis, ADIS16136_REG_LOT2, &lot2);
+ if (ret < 0)
+ return ret;
+
+ ret = adis_read_reg_16(&adis16136->adis, ADIS16136_REG_LOT3, &lot3);
+ if (ret < 0)
+ return ret;
+
+ len = snprintf(buf, sizeof(buf), "%.4x%.4x%.4x-%.4x\n", lot1, lot2,
+ lot3, serial);
+
+ return simple_read_from_buffer(userbuf, count, ppos, buf, len);
+}
+
+static const struct file_operations adis16136_serial_fops = {
+ .open = simple_open,
+ .read = adis16136_show_serial,
+ .llseek = default_llseek,
+ .owner = THIS_MODULE,
+};
+
+static int adis16136_show_product_id(void *arg, u64 *val)
+{
+ struct adis16136 *adis16136 = arg;
+ u16 prod_id;
+ int ret;
+
+ ret = adis_read_reg_16(&adis16136->adis, ADIS16136_REG_PROD_ID,
+ &prod_id);
+ if (ret < 0)
+ return ret;
+
+ *val = prod_id;
+
+ return 0;
+}
+DEFINE_SIMPLE_ATTRIBUTE(adis16136_product_id_fops,
+ adis16136_show_product_id, NULL, "%llu\n");
+
+static int adis16136_show_flash_count(void *arg, u64 *val)
+{
+ struct adis16136 *adis16136 = arg;
+ uint16_t flash_count;
+ int ret;
+
+ ret = adis_read_reg_16(&adis16136->adis, ADIS16136_REG_FLASH_CNT,
+ &flash_count);
+ if (ret < 0)
+ return ret;
+
+ *val = flash_count;
+
+ return 0;
+}
+DEFINE_SIMPLE_ATTRIBUTE(adis16136_flash_count_fops,
+ adis16136_show_flash_count, NULL, "%lld\n");
+
+static int adis16136_debugfs_init(struct iio_dev *indio_dev)
+{
+ struct adis16136 *adis16136 = iio_priv(indio_dev);
+
+ debugfs_create_file("serial_number", 0400, indio_dev->debugfs_dentry,
+ adis16136, &adis16136_serial_fops);
+ debugfs_create_file("product_id", 0400, indio_dev->debugfs_dentry,
+ adis16136, &adis16136_product_id_fops);
+ debugfs_create_file("flash_count", 0400, indio_dev->debugfs_dentry,
+ adis16136, &adis16136_flash_count_fops);
+
+ return 0;
+}
+
+#else
+
+static int adis16136_debugfs_init(struct iio_dev *indio_dev)
+{
+ return 0;
+}
+
+#endif
+
+static int adis16136_set_freq(struct adis16136 *adis16136, unsigned int freq)
+{
+ unsigned int t;
+
+ t = 32768 / freq;
+ if (t < 0xf)
+ t = 0xf;
+ else if (t > 0xffff)
+ t = 0xffff;
+ else
+ t--;
+
+ return adis_write_reg_16(&adis16136->adis, ADIS16136_REG_SMPL_PRD, t);
+}
+
+static int adis16136_get_freq(struct adis16136 *adis16136, unsigned int *freq)
+{
+ uint16_t t;
+ int ret;
+
+ ret = adis_read_reg_16(&adis16136->adis, ADIS16136_REG_SMPL_PRD, &t);
+ if (ret < 0)
+ return ret;
+
+ *freq = 32768 / (t + 1);
+
+ return 0;
+}
+
+static ssize_t adis16136_write_frequency(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t len)
+{
+ struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+ struct adis16136 *adis16136 = iio_priv(indio_dev);
+ unsigned int val;
+ int ret;
+
+ ret = kstrtouint(buf, 10, &val);
+ if (ret)
+ return ret;
+
+ if (val == 0)
+ return -EINVAL;
+
+ ret = adis16136_set_freq(adis16136, val);
+
+ return ret ? ret : len;
+}
+
+static ssize_t adis16136_read_frequency(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+ struct adis16136 *adis16136 = iio_priv(indio_dev);
+ unsigned int freq;
+ int ret;
+
+ ret = adis16136_get_freq(adis16136, &freq);
+ if (ret < 0)
+ return ret;
+
+ return sprintf(buf, "%d\n", freq);
+}
+
+static IIO_DEV_ATTR_SAMP_FREQ(S_IWUSR | S_IRUGO,
+ adis16136_read_frequency,
+ adis16136_write_frequency);
+
+static const unsigned adis16136_3db_divisors[] = {
+ [0] = 2, /* Special case */
+ [1] = 6,
+ [2] = 12,
+ [3] = 25,
+ [4] = 50,
+ [5] = 100,
+ [6] = 200,
+ [7] = 200, /* Not a valid setting */
+};
+
+static int adis16136_set_filter(struct iio_dev *indio_dev, int val)
+{
+ struct adis16136 *adis16136 = iio_priv(indio_dev);
+ unsigned int freq;
+ int i, ret;
+
+ ret = adis16136_get_freq(adis16136, &freq);
+ if (ret < 0)
+ return ret;
+
+ for (i = ARRAY_SIZE(adis16136_3db_divisors) - 1; i >= 1; i--) {
+ if (freq / adis16136_3db_divisors[i] >= val)
+ break;
+ }
+
+ return adis_write_reg_16(&adis16136->adis, ADIS16136_REG_AVG_CNT, i);
+}
+
+static int adis16136_get_filter(struct iio_dev *indio_dev, int *val)
+{
+ struct adis16136 *adis16136 = iio_priv(indio_dev);
+ unsigned int freq;
+ uint16_t val16;
+ int ret;
+
+ mutex_lock(&indio_dev->mlock);
+
+ ret = adis_read_reg_16(&adis16136->adis, ADIS16136_REG_AVG_CNT, &val16);
+ if (ret < 0)
+ goto err_unlock;
+
+ ret = adis16136_get_freq(adis16136, &freq);
+ if (ret < 0)
+ goto err_unlock;
+
+ *val = freq / adis16136_3db_divisors[val16 & 0x07];
+
+err_unlock:
+ mutex_unlock(&indio_dev->mlock);
+
+ return ret ? ret : IIO_VAL_INT;
+}
+
+static int adis16136_read_raw(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan, int *val, int *val2, long info)
+{
+ struct adis16136 *adis16136 = iio_priv(indio_dev);
+ uint32_t val32;
+ int ret;
+
+ switch (info) {
+ case IIO_CHAN_INFO_RAW:
+ return adis_single_conversion(indio_dev, chan, 0, val);
+ case IIO_CHAN_INFO_SCALE:
+ switch (chan->type) {
+ case IIO_ANGL_VEL:
+ *val = adis16136->chip_info->precision;
+ *val2 = (adis16136->chip_info->fullscale << 16);
+ return IIO_VAL_FRACTIONAL;
+ case IIO_TEMP:
+ *val = 10;
+ *val2 = 697000; /* 0.010697 degree Celsius */
+ return IIO_VAL_INT_PLUS_MICRO;
+ default:
+ return -EINVAL;
+ }
+ case IIO_CHAN_INFO_CALIBBIAS:
+ ret = adis_read_reg_32(&adis16136->adis,
+ ADIS16136_REG_GYRO_OFF2, &val32);
+ if (ret < 0)
+ return ret;
+
+ *val = sign_extend32(val32, 31);
+
+ return IIO_VAL_INT;
+ case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
+ return adis16136_get_filter(indio_dev, val);
+ default:
+ return -EINVAL;
+ }
+}
+
+static int adis16136_write_raw(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan, int val, int val2, long info)
+{
+ struct adis16136 *adis16136 = iio_priv(indio_dev);
+
+ switch (info) {
+ case IIO_CHAN_INFO_CALIBBIAS:
+ return adis_write_reg_32(&adis16136->adis,
+ ADIS16136_REG_GYRO_OFF2, val);
+ case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
+ return adis16136_set_filter(indio_dev, val);
+ default:
+ break;
+ }
+
+ return -EINVAL;
+}
+
+enum {
+ ADIS16136_SCAN_GYRO,
+ ADIS16136_SCAN_TEMP,
+};
+
+static const struct iio_chan_spec adis16136_channels[] = {
+ {
+ .type = IIO_ANGL_VEL,
+ .modified = 1,
+ .channel2 = IIO_MOD_X,
+ .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+ IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
+ IIO_CHAN_INFO_SCALE_SHARED_BIT |
+ IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY_SEPARATE_BIT,
+ .address = ADIS16136_REG_GYRO_OUT2,
+ .scan_index = ADIS16136_SCAN_GYRO,
+ .scan_type = {
+ .sign = 's',
+ .realbits = 32,
+ .storagebits = 32,
+ .endianness = IIO_BE,
+ },
+ }, {
+ .type = IIO_TEMP,
+ .indexed = 1,
+ .channel = 0,
+ .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+ IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
+ .address = ADIS16136_REG_TEMP_OUT,
+ .scan_index = ADIS16136_SCAN_TEMP,
+ .scan_type = {
+ .sign = 's',
+ .realbits = 16,
+ .storagebits = 16,
+ .endianness = IIO_BE,
+ },
+ },
+ IIO_CHAN_SOFT_TIMESTAMP(2),
+};
+
+static struct attribute *adis16136_attributes[] = {
+ &iio_dev_attr_sampling_frequency.dev_attr.attr,
+ NULL
+};
+
+static const struct attribute_group adis16136_attribute_group = {
+ .attrs = adis16136_attributes,
+};
+
+static const struct iio_info adis16136_info = {
+ .driver_module = THIS_MODULE,
+ .attrs = &adis16136_attribute_group,
+ .read_raw = &adis16136_read_raw,
+ .write_raw = &adis16136_write_raw,
+ .update_scan_mode = adis_update_scan_mode,
+ .debugfs_reg_access = adis_debugfs_reg_access,
+};
+
+static int adis16136_stop_device(struct iio_dev *indio_dev)
+{
+ struct adis16136 *adis16136 = iio_priv(indio_dev);
+ int ret;
+
+ ret = adis_write_reg_16(&adis16136->adis, ADIS16136_REG_SLP_CTRL, 0xff);
+ if (ret)
+ dev_err(&indio_dev->dev,
+ "Could not power down device: %d\n", ret);
+
+ return ret;
+}
+
+static int adis16136_initial_setup(struct iio_dev *indio_dev)
+{
+ struct adis16136 *adis16136 = iio_priv(indio_dev);
+ unsigned int device_id;
+ uint16_t prod_id;
+ int ret;
+
+ ret = adis_initial_startup(&adis16136->adis);
+ if (ret)
+ return ret;
+
+ ret = adis_read_reg_16(&adis16136->adis, ADIS16136_REG_PROD_ID,
+ &prod_id);
+ if (ret)
+ return ret;
+
+ sscanf(indio_dev->name, "adis%u\n", &device_id);
+
+ if (prod_id != device_id)
+ dev_warn(&indio_dev->dev, "Device ID(%u) and product ID(%u) do not match.",
+ device_id, prod_id);
+
+ return 0;
+}
+
+static const char * const adis16136_status_error_msgs[] = {
+ [ADIS16136_DIAG_STAT_FLASH_UPDATE_FAIL] = "Flash update failed",
+ [ADIS16136_DIAG_STAT_SPI_FAIL] = "SPI failure",
+ [ADIS16136_DIAG_STAT_SELF_TEST_FAIL] = "Self test error",
+ [ADIS16136_DIAG_STAT_FLASH_CHKSUM_FAIL] = "Flash checksum error",
+};
+
+static const struct adis_data adis16136_data = {
+ .diag_stat_reg = ADIS16136_REG_DIAG_STAT,
+ .glob_cmd_reg = ADIS16136_REG_GLOB_CMD,
+ .msc_ctrl_reg = ADIS16136_REG_MSC_CTRL,
+
+ .self_test_mask = ADIS16136_MSC_CTRL_SELF_TEST,
+ .startup_delay = 80,
+
+ .read_delay = 10,
+ .write_delay = 10,
+
+ .status_error_msgs = adis16136_status_error_msgs,
+ .status_error_mask = BIT(ADIS16136_DIAG_STAT_FLASH_UPDATE_FAIL) |
+ BIT(ADIS16136_DIAG_STAT_SPI_FAIL) |
+ BIT(ADIS16136_DIAG_STAT_SELF_TEST_FAIL) |
+ BIT(ADIS16136_DIAG_STAT_FLASH_CHKSUM_FAIL),
+};
+
+enum adis16136_id {
+ ID_ADIS16133,
+ ID_ADIS16135,
+ ID_ADIS16136,
+};
+
+static const struct adis16136_chip_info adis16136_chip_info[] = {
+ [ID_ADIS16133] = {
+ .precision = IIO_DEGREE_TO_RAD(1200),
+ .fullscale = 24000,
+ },
+ [ID_ADIS16135] = {
+ .precision = IIO_DEGREE_TO_RAD(300),
+ .fullscale = 24000,
+ },
+ [ID_ADIS16136] = {
+ .precision = IIO_DEGREE_TO_RAD(450),
+ .fullscale = 24623,
+ },
+};
+
+static int adis16136_probe(struct spi_device *spi)
+{
+ const struct spi_device_id *id = spi_get_device_id(spi);
+ struct adis16136 *adis16136;
+ struct iio_dev *indio_dev;
+ int ret;
+
+ indio_dev = iio_device_alloc(sizeof(*adis16136));
+ if (indio_dev == NULL)
+ return -ENOMEM;
+
+ spi_set_drvdata(spi, indio_dev);
+
+ adis16136 = iio_priv(indio_dev);
+
+ adis16136->chip_info = &adis16136_chip_info[id->driver_data];
+ indio_dev->dev.parent = &spi->dev;
+ indio_dev->name = spi_get_device_id(spi)->name;
+ indio_dev->channels = adis16136_channels;
+ indio_dev->num_channels = ARRAY_SIZE(adis16136_channels);
+ indio_dev->info = &adis16136_info;
+ indio_dev->modes = INDIO_DIRECT_MODE;
+
+ ret = adis_init(&adis16136->adis, indio_dev, spi, &adis16136_data);
+ if (ret)
+ goto error_free_dev;
+
+ ret = adis_setup_buffer_and_trigger(&adis16136->adis, indio_dev, NULL);
+ if (ret)
+ goto error_free_dev;
+
+ ret = adis16136_initial_setup(indio_dev);
+ if (ret)
+ goto error_cleanup_buffer;
+
+ ret = iio_device_register(indio_dev);
+ if (ret)
+ goto error_stop_device;
+
+ adis16136_debugfs_init(indio_dev);
+
+ return 0;
+
+error_stop_device:
+ adis16136_stop_device(indio_dev);
+error_cleanup_buffer:
+ adis_cleanup_buffer_and_trigger(&adis16136->adis, indio_dev);
+error_free_dev:
+ iio_device_free(indio_dev);
+ return ret;
+}
+
+static int adis16136_remove(struct spi_device *spi)
+{
+ struct iio_dev *indio_dev = spi_get_drvdata(spi);
+ struct adis16136 *adis16136 = iio_priv(indio_dev);
+
+ iio_device_unregister(indio_dev);
+ adis16136_stop_device(indio_dev);
+
+ adis_cleanup_buffer_and_trigger(&adis16136->adis, indio_dev);
+
+ iio_device_free(indio_dev);
+
+ return 0;
+}
+
+static const struct spi_device_id adis16136_ids[] = {
+ { "adis16133", ID_ADIS16133 },
+ { "adis16135", ID_ADIS16135 },
+ { "adis16136", ID_ADIS16136 },
+ { }
+};
+MODULE_DEVICE_TABLE(spi, adis16136_ids);
+
+static struct spi_driver adis16136_driver = {
+ .driver = {
+ .name = "adis16136",
+ .owner = THIS_MODULE,
+ },
+ .id_table = adis16136_ids,
+ .probe = adis16136_probe,
+ .remove = adis16136_remove,
+};
+module_spi_driver(adis16136_driver);
+
+MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
+MODULE_DESCRIPTION("Analog Devices ADIS16133/ADIS16135/ADIS16136 gyroscope driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/gyro/hid-sensor-gyro-3d.c b/drivers/iio/gyro/hid-sensor-gyro-3d.c
index 4c56ada..4c8b158 100644
--- a/drivers/iio/gyro/hid-sensor-gyro-3d.c
+++ b/drivers/iio/gyro/hid-sensor-gyro-3d.c
@@ -197,21 +197,8 @@
/* Function to push data to buffer */
static void hid_sensor_push_data(struct iio_dev *indio_dev, u8 *data, int len)
{
- struct iio_buffer *buffer = indio_dev->buffer;
- int datum_sz;
-
dev_dbg(&indio_dev->dev, "hid_sensor_push_data\n");
- if (!buffer) {
- dev_err(&indio_dev->dev, "Buffer == NULL\n");
- return;
- }
- datum_sz = buffer->access->get_bytes_per_datum(buffer);
- if (len > datum_sz) {
- dev_err(&indio_dev->dev, "Datum size mismatch %d:%d\n", len,
- datum_sz);
- return;
- }
- iio_push_to_buffer(buffer, (u8 *)data);
+ iio_push_to_buffers(indio_dev, (u8 *)data);
}
/* Callback handler to send event after all samples are received and captured */
@@ -319,10 +306,10 @@
goto error_free_dev;
}
- channels = kmemdup(gyro_3d_channels,
- sizeof(gyro_3d_channels),
- GFP_KERNEL);
+ channels = kmemdup(gyro_3d_channels, sizeof(gyro_3d_channels),
+ GFP_KERNEL);
if (!channels) {
+ ret = -ENOMEM;
dev_err(&pdev->dev, "failed to duplicate channels\n");
goto error_free_dev;
}
diff --git a/drivers/iio/imu/Kconfig b/drivers/iio/imu/Kconfig
new file mode 100644
index 0000000..3d79a40
--- /dev/null
+++ b/drivers/iio/imu/Kconfig
@@ -0,0 +1,27 @@
+#
+# IIO imu drivers configuration
+#
+menu "Inertial measurement units"
+
+config ADIS16480
+ tristate "Analog Devices ADIS16480 and similar IMU driver"
+ depends on SPI
+ select IIO_ADIS_LIB
+ select IIO_ADIS_LIB_BUFFER if IIO_BUFFER
+ help
+ Say yes here to build support for Analog Devices ADIS16375, ADIS16480,
+ ADIS16485, ADIS16488 inertial sensors.
+
+endmenu
+
+config IIO_ADIS_LIB
+ tristate
+ help
+ A set of IO helper functions for the Analog Devices ADIS* device family.
+
+config IIO_ADIS_LIB_BUFFER
+ bool
+ select IIO_TRIGGERED_BUFFER
+ help
+ A set of buffer helper functions for the Analog Devices ADIS* device
+ family.
diff --git a/drivers/iio/imu/Makefile b/drivers/iio/imu/Makefile
new file mode 100644
index 0000000..cfe5763
--- /dev/null
+++ b/drivers/iio/imu/Makefile
@@ -0,0 +1,10 @@
+#
+# Makefile for Inertial Measurement Units
+#
+
+obj-$(CONFIG_ADIS16480) += adis16480.o
+
+adis_lib-y += adis.o
+adis_lib-$(CONFIG_IIO_ADIS_LIB_BUFFER) += adis_trigger.o
+adis_lib-$(CONFIG_IIO_ADIS_LIB_BUFFER) += adis_buffer.o
+obj-$(CONFIG_IIO_ADIS_LIB) += adis_lib.o
diff --git a/drivers/iio/imu/adis.c b/drivers/iio/imu/adis.c
new file mode 100644
index 0000000..911255d
--- /dev/null
+++ b/drivers/iio/imu/adis.c
@@ -0,0 +1,440 @@
+/*
+ * Common library for ADIS16XXX devices
+ *
+ * Copyright 2012 Analog Devices Inc.
+ * Author: Lars-Peter Clausen <lars@metafoo.de>
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/delay.h>
+#include <linux/mutex.h>
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/spi/spi.h>
+#include <linux/slab.h>
+#include <linux/sysfs.h>
+#include <linux/module.h>
+#include <asm/unaligned.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/imu/adis.h>
+
+#define ADIS_MSC_CTRL_DATA_RDY_EN BIT(2)
+#define ADIS_MSC_CTRL_DATA_RDY_POL_HIGH BIT(1)
+#define ADIS_MSC_CTRL_DATA_RDY_DIO2 BIT(0)
+#define ADIS_GLOB_CMD_SW_RESET BIT(7)
+
+int adis_write_reg(struct adis *adis, unsigned int reg,
+ unsigned int value, unsigned int size)
+{
+ unsigned int page = reg / ADIS_PAGE_SIZE;
+ int ret, i;
+ struct spi_message msg;
+ struct spi_transfer xfers[] = {
+ {
+ .tx_buf = adis->tx,
+ .bits_per_word = 8,
+ .len = 2,
+ .cs_change = 1,
+ .delay_usecs = adis->data->write_delay,
+ }, {
+ .tx_buf = adis->tx + 2,
+ .bits_per_word = 8,
+ .len = 2,
+ .cs_change = 1,
+ .delay_usecs = adis->data->write_delay,
+ }, {
+ .tx_buf = adis->tx + 4,
+ .bits_per_word = 8,
+ .len = 2,
+ .cs_change = 1,
+ .delay_usecs = adis->data->write_delay,
+ }, {
+ .tx_buf = adis->tx + 6,
+ .bits_per_word = 8,
+ .len = 2,
+ .delay_usecs = adis->data->write_delay,
+ }, {
+ .tx_buf = adis->tx + 8,
+ .bits_per_word = 8,
+ .len = 2,
+ .delay_usecs = adis->data->write_delay,
+ },
+ };
+
+ mutex_lock(&adis->txrx_lock);
+
+ spi_message_init(&msg);
+
+ if (adis->current_page != page) {
+ adis->tx[0] = ADIS_WRITE_REG(ADIS_REG_PAGE_ID);
+ adis->tx[1] = page;
+ spi_message_add_tail(&xfers[0], &msg);
+ }
+
+ switch (size) {
+ case 4:
+ adis->tx[8] = ADIS_WRITE_REG(reg + 3);
+ adis->tx[9] = (value >> 24) & 0xff;
+ adis->tx[6] = ADIS_WRITE_REG(reg + 2);
+ adis->tx[7] = (value >> 16) & 0xff;
+ case 2:
+ adis->tx[4] = ADIS_WRITE_REG(reg + 1);
+ adis->tx[5] = (value >> 8) & 0xff;
+ case 1:
+ adis->tx[2] = ADIS_WRITE_REG(reg);
+ adis->tx[3] = value & 0xff;
+ break;
+ default:
+ ret = -EINVAL;
+ goto out_unlock;
+ }
+
+ xfers[size].cs_change = 0;
+
+ for (i = 1; i <= size; i++)
+ spi_message_add_tail(&xfers[i], &msg);
+
+ ret = spi_sync(adis->spi, &msg);
+ if (ret) {
+ dev_err(&adis->spi->dev, "Failed to write register 0x%02X: %d\n",
+ reg, ret);
+ } else {
+ adis->current_page = page;
+ }
+
+out_unlock:
+ mutex_unlock(&adis->txrx_lock);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(adis_write_reg);
+
+/**
+ * adis_read_reg() - read 2 bytes from a 16-bit register
+ * @adis: The adis device
+ * @reg: The address of the lower of the two registers
+ * @val: The value read back from the device
+ */
+int adis_read_reg(struct adis *adis, unsigned int reg,
+ unsigned int *val, unsigned int size)
+{
+ unsigned int page = reg / ADIS_PAGE_SIZE;
+ struct spi_message msg;
+ int ret;
+ struct spi_transfer xfers[] = {
+ {
+ .tx_buf = adis->tx,
+ .bits_per_word = 8,
+ .len = 2,
+ .cs_change = 1,
+ .delay_usecs = adis->data->write_delay,
+ }, {
+ .tx_buf = adis->tx + 2,
+ .bits_per_word = 8,
+ .len = 2,
+ .cs_change = 1,
+ .delay_usecs = adis->data->read_delay,
+ }, {
+ .tx_buf = adis->tx + 4,
+ .rx_buf = adis->rx,
+ .bits_per_word = 8,
+ .len = 2,
+ .cs_change = 1,
+ .delay_usecs = adis->data->read_delay,
+ }, {
+ .rx_buf = adis->rx + 2,
+ .bits_per_word = 8,
+ .len = 2,
+ .delay_usecs = adis->data->read_delay,
+ },
+ };
+
+ mutex_lock(&adis->txrx_lock);
+ spi_message_init(&msg);
+
+ if (adis->current_page != page) {
+ adis->tx[0] = ADIS_WRITE_REG(ADIS_REG_PAGE_ID);
+ adis->tx[1] = page;
+ spi_message_add_tail(&xfers[0], &msg);
+ }
+
+ switch (size) {
+ case 4:
+ adis->tx[2] = ADIS_READ_REG(reg + 2);
+ adis->tx[3] = 0;
+ spi_message_add_tail(&xfers[1], &msg);
+ case 2:
+ adis->tx[4] = ADIS_READ_REG(reg);
+ adis->tx[5] = 0;
+ spi_message_add_tail(&xfers[2], &msg);
+ spi_message_add_tail(&xfers[3], &msg);
+ break;
+ default:
+ ret = -EINVAL;
+ goto out_unlock;
+ }
+
+ ret = spi_sync(adis->spi, &msg);
+ if (ret) {
+ dev_err(&adis->spi->dev, "Failed to read register 0x%02X: %d\n",
+ reg, ret);
+ goto out_unlock;
+ } else {
+ adis->current_page = page;
+ }
+
+ switch (size) {
+ case 4:
+ *val = get_unaligned_be32(adis->rx);
+ break;
+ case 2:
+ *val = get_unaligned_be16(adis->rx + 2);
+ break;
+ }
+
+out_unlock:
+ mutex_unlock(&adis->txrx_lock);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(adis_read_reg);
+
+#ifdef CONFIG_DEBUG_FS
+
+int adis_debugfs_reg_access(struct iio_dev *indio_dev,
+ unsigned int reg, unsigned int writeval, unsigned int *readval)
+{
+ struct adis *adis = iio_device_get_drvdata(indio_dev);
+
+ if (readval) {
+ uint16_t val16;
+ int ret;
+
+ ret = adis_read_reg_16(adis, reg, &val16);
+ *readval = val16;
+
+ return ret;
+ } else {
+ return adis_write_reg_16(adis, reg, writeval);
+ }
+}
+EXPORT_SYMBOL(adis_debugfs_reg_access);
+
+#endif
+
+/**
+ * adis_enable_irq() - Enable or disable data ready IRQ
+ * @adis: The adis device
+ * @enable: Whether to enable the IRQ
+ *
+ * Returns 0 on success, negative error code otherwise
+ */
+int adis_enable_irq(struct adis *adis, bool enable)
+{
+ int ret = 0;
+ uint16_t msc;
+
+ if (adis->data->enable_irq)
+ return adis->data->enable_irq(adis, enable);
+
+ ret = adis_read_reg_16(adis, adis->data->msc_ctrl_reg, &msc);
+ if (ret)
+ goto error_ret;
+
+ msc |= ADIS_MSC_CTRL_DATA_RDY_POL_HIGH;
+ msc &= ~ADIS_MSC_CTRL_DATA_RDY_DIO2;
+ if (enable)
+ msc |= ADIS_MSC_CTRL_DATA_RDY_EN;
+ else
+ msc &= ~ADIS_MSC_CTRL_DATA_RDY_EN;
+
+ ret = adis_write_reg_16(adis, adis->data->msc_ctrl_reg, msc);
+
+error_ret:
+ return ret;
+}
+EXPORT_SYMBOL(adis_enable_irq);
+
+/**
+ * adis_check_status() - Check the device for error conditions
+ * @adis: The adis device
+ *
+ * Returns 0 on success, a negative error code otherwise
+ */
+int adis_check_status(struct adis *adis)
+{
+ uint16_t status;
+ int ret;
+ int i;
+
+ ret = adis_read_reg_16(adis, adis->data->diag_stat_reg, &status);
+ if (ret < 0)
+ return ret;
+
+ status &= adis->data->status_error_mask;
+
+ if (status == 0)
+ return 0;
+
+ for (i = 0; i < 16; ++i) {
+ if (status & BIT(i)) {
+ dev_err(&adis->spi->dev, "%s.\n",
+ adis->data->status_error_msgs[i]);
+ }
+ }
+
+ return -EIO;
+}
+EXPORT_SYMBOL_GPL(adis_check_status);
+
+/**
+ * adis_reset() - Reset the device
+ * @adis: The adis device
+ *
+ * Returns 0 on success, a negative error code otherwise
+ */
+int adis_reset(struct adis *adis)
+{
+ int ret;
+
+ ret = adis_write_reg_8(adis, adis->data->glob_cmd_reg,
+ ADIS_GLOB_CMD_SW_RESET);
+ if (ret)
+ dev_err(&adis->spi->dev, "Failed to reset device: %d\n", ret);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(adis_reset);
+
+static int adis_self_test(struct adis *adis)
+{
+ int ret;
+
+ ret = adis_write_reg_16(adis, adis->data->msc_ctrl_reg,
+ adis->data->self_test_mask);
+ if (ret) {
+ dev_err(&adis->spi->dev, "Failed to initiate self test: %d\n",
+ ret);
+ return ret;
+ }
+
+ msleep(adis->data->startup_delay);
+
+ return adis_check_status(adis);
+}
+
+/**
+ * adis_inital_startup() - Performs device self-test
+ * @adis: The adis device
+ *
+ * Returns 0 if the device is operational, a negative error code otherwise.
+ *
+ * This function should be called early on in the device initialization sequence
+ * to ensure that the device is in a sane and known state and that it is usable.
+ */
+int adis_initial_startup(struct adis *adis)
+{
+ int ret;
+
+ ret = adis_self_test(adis);
+ if (ret) {
+ dev_err(&adis->spi->dev, "Self-test failed, trying reset.\n");
+ adis_reset(adis);
+ msleep(adis->data->startup_delay);
+ ret = adis_self_test(adis);
+ if (ret) {
+ dev_err(&adis->spi->dev, "Second self-test failed, giving up.\n");
+ return ret;
+ }
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(adis_initial_startup);
+
+/**
+ * adis_single_conversion() - Performs a single sample conversion
+ * @indio_dev: The IIO device
+ * @chan: The IIO channel
+ * @error_mask: Mask for the error bit
+ * @val: Result of the conversion
+ *
+ * Returns IIO_VAL_INT on success, a negative error code otherwise.
+ *
+ * The function performs a single conversion on a given channel and post
+ * processes the value accordingly to the channel spec. If a error_mask is given
+ * the function will check if the mask is set in the returned raw value. If it
+ * is set the function will perform a self-check. If the device does not report
+ * a error bit in the channels raw value set error_mask to 0.
+ */
+int adis_single_conversion(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan, unsigned int error_mask, int *val)
+{
+ struct adis *adis = iio_device_get_drvdata(indio_dev);
+ unsigned int uval;
+ int ret;
+
+ mutex_lock(&indio_dev->mlock);
+
+ ret = adis_read_reg(adis, chan->address, &uval,
+ chan->scan_type.storagebits / 8);
+ if (ret)
+ goto err_unlock;
+
+ if (uval & error_mask) {
+ ret = adis_check_status(adis);
+ if (ret)
+ goto err_unlock;
+ }
+
+ if (chan->scan_type.sign == 's')
+ *val = sign_extend32(uval, chan->scan_type.realbits - 1);
+ else
+ *val = uval & ((1 << chan->scan_type.realbits) - 1);
+
+ ret = IIO_VAL_INT;
+err_unlock:
+ mutex_unlock(&indio_dev->mlock);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(adis_single_conversion);
+
+/**
+ * adis_init() - Initialize adis device structure
+ * @adis: The adis device
+ * @indio_dev: The iio device
+ * @spi: The spi device
+ * @data: Chip specific data
+ *
+ * Returns 0 on success, a negative error code otherwise.
+ *
+ * This function must be called, before any other adis helper function may be
+ * called.
+ */
+int adis_init(struct adis *adis, struct iio_dev *indio_dev,
+ struct spi_device *spi, const struct adis_data *data)
+{
+ mutex_init(&adis->txrx_lock);
+ adis->spi = spi;
+ adis->data = data;
+ iio_device_set_drvdata(indio_dev, adis);
+
+ if (data->has_paging) {
+ /* Need to set the page before first read/write */
+ adis->current_page = -1;
+ } else {
+ /* Page will always be 0 */
+ adis->current_page = 0;
+ }
+
+ return adis_enable_irq(adis, false);
+}
+EXPORT_SYMBOL_GPL(adis_init);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
+MODULE_DESCRIPTION("Common library code for ADIS16XXX devices");
diff --git a/drivers/iio/imu/adis16480.c b/drivers/iio/imu/adis16480.c
new file mode 100644
index 0000000..8c26a5f
--- /dev/null
+++ b/drivers/iio/imu/adis16480.c
@@ -0,0 +1,924 @@
+/*
+ * ADIS16480 and similar IMUs driver
+ *
+ * Copyright 2012 Analog Devices Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/mutex.h>
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/spi/spi.h>
+#include <linux/slab.h>
+#include <linux/sysfs.h>
+#include <linux/module.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/imu/adis.h>
+
+#include <linux/debugfs.h>
+
+#define ADIS16480_PAGE_SIZE 0x80
+
+#define ADIS16480_REG(page, reg) ((page) * ADIS16480_PAGE_SIZE + (reg))
+
+#define ADIS16480_REG_PAGE_ID 0x00 /* Same address on each page */
+#define ADIS16480_REG_SEQ_CNT ADIS16480_REG(0x00, 0x06)
+#define ADIS16480_REG_SYS_E_FLA ADIS16480_REG(0x00, 0x08)
+#define ADIS16480_REG_DIAG_STS ADIS16480_REG(0x00, 0x0A)
+#define ADIS16480_REG_ALM_STS ADIS16480_REG(0x00, 0x0C)
+#define ADIS16480_REG_TEMP_OUT ADIS16480_REG(0x00, 0x0E)
+#define ADIS16480_REG_X_GYRO_OUT ADIS16480_REG(0x00, 0x10)
+#define ADIS16480_REG_Y_GYRO_OUT ADIS16480_REG(0x00, 0x14)
+#define ADIS16480_REG_Z_GYRO_OUT ADIS16480_REG(0x00, 0x18)
+#define ADIS16480_REG_X_ACCEL_OUT ADIS16480_REG(0x00, 0x1C)
+#define ADIS16480_REG_Y_ACCEL_OUT ADIS16480_REG(0x00, 0x20)
+#define ADIS16480_REG_Z_ACCEL_OUT ADIS16480_REG(0x00, 0x24)
+#define ADIS16480_REG_X_MAGN_OUT ADIS16480_REG(0x00, 0x28)
+#define ADIS16480_REG_Y_MAGN_OUT ADIS16480_REG(0x00, 0x2A)
+#define ADIS16480_REG_Z_MAGN_OUT ADIS16480_REG(0x00, 0x2C)
+#define ADIS16480_REG_BAROM_OUT ADIS16480_REG(0x00, 0x2E)
+#define ADIS16480_REG_X_DELTAANG_OUT ADIS16480_REG(0x00, 0x40)
+#define ADIS16480_REG_Y_DELTAANG_OUT ADIS16480_REG(0x00, 0x44)
+#define ADIS16480_REG_Z_DELTAANG_OUT ADIS16480_REG(0x00, 0x48)
+#define ADIS16480_REG_X_DELTAVEL_OUT ADIS16480_REG(0x00, 0x4C)
+#define ADIS16480_REG_Y_DELTAVEL_OUT ADIS16480_REG(0x00, 0x50)
+#define ADIS16480_REG_Z_DELTAVEL_OUT ADIS16480_REG(0x00, 0x54)
+#define ADIS16480_REG_PROD_ID ADIS16480_REG(0x00, 0x7E)
+
+#define ADIS16480_REG_X_GYRO_SCALE ADIS16480_REG(0x02, 0x04)
+#define ADIS16480_REG_Y_GYRO_SCALE ADIS16480_REG(0x02, 0x06)
+#define ADIS16480_REG_Z_GYRO_SCALE ADIS16480_REG(0x02, 0x08)
+#define ADIS16480_REG_X_ACCEL_SCALE ADIS16480_REG(0x02, 0x0A)
+#define ADIS16480_REG_Y_ACCEL_SCALE ADIS16480_REG(0x02, 0x0C)
+#define ADIS16480_REG_Z_ACCEL_SCALE ADIS16480_REG(0x02, 0x0E)
+#define ADIS16480_REG_X_GYRO_BIAS ADIS16480_REG(0x02, 0x10)
+#define ADIS16480_REG_Y_GYRO_BIAS ADIS16480_REG(0x02, 0x14)
+#define ADIS16480_REG_Z_GYRO_BIAS ADIS16480_REG(0x02, 0x18)
+#define ADIS16480_REG_X_ACCEL_BIAS ADIS16480_REG(0x02, 0x1C)
+#define ADIS16480_REG_Y_ACCEL_BIAS ADIS16480_REG(0x02, 0x20)
+#define ADIS16480_REG_Z_ACCEL_BIAS ADIS16480_REG(0x02, 0x24)
+#define ADIS16480_REG_X_HARD_IRON ADIS16480_REG(0x02, 0x28)
+#define ADIS16480_REG_Y_HARD_IRON ADIS16480_REG(0x02, 0x2A)
+#define ADIS16480_REG_Z_HARD_IRON ADIS16480_REG(0x02, 0x2C)
+#define ADIS16480_REG_BAROM_BIAS ADIS16480_REG(0x02, 0x40)
+#define ADIS16480_REG_FLASH_CNT ADIS16480_REG(0x02, 0x7C)
+
+#define ADIS16480_REG_GLOB_CMD ADIS16480_REG(0x03, 0x02)
+#define ADIS16480_REG_FNCTIO_CTRL ADIS16480_REG(0x03, 0x06)
+#define ADIS16480_REG_GPIO_CTRL ADIS16480_REG(0x03, 0x08)
+#define ADIS16480_REG_CONFIG ADIS16480_REG(0x03, 0x0A)
+#define ADIS16480_REG_DEC_RATE ADIS16480_REG(0x03, 0x0C)
+#define ADIS16480_REG_SLP_CNT ADIS16480_REG(0x03, 0x10)
+#define ADIS16480_REG_FILTER_BNK0 ADIS16480_REG(0x03, 0x16)
+#define ADIS16480_REG_FILTER_BNK1 ADIS16480_REG(0x03, 0x18)
+#define ADIS16480_REG_ALM_CNFG0 ADIS16480_REG(0x03, 0x20)
+#define ADIS16480_REG_ALM_CNFG1 ADIS16480_REG(0x03, 0x22)
+#define ADIS16480_REG_ALM_CNFG2 ADIS16480_REG(0x03, 0x24)
+#define ADIS16480_REG_XG_ALM_MAGN ADIS16480_REG(0x03, 0x28)
+#define ADIS16480_REG_YG_ALM_MAGN ADIS16480_REG(0x03, 0x2A)
+#define ADIS16480_REG_ZG_ALM_MAGN ADIS16480_REG(0x03, 0x2C)
+#define ADIS16480_REG_XA_ALM_MAGN ADIS16480_REG(0x03, 0x2E)
+#define ADIS16480_REG_YA_ALM_MAGN ADIS16480_REG(0x03, 0x30)
+#define ADIS16480_REG_ZA_ALM_MAGN ADIS16480_REG(0x03, 0x32)
+#define ADIS16480_REG_XM_ALM_MAGN ADIS16480_REG(0x03, 0x34)
+#define ADIS16480_REG_YM_ALM_MAGN ADIS16480_REG(0x03, 0x36)
+#define ADIS16480_REG_ZM_ALM_MAGN ADIS16480_REG(0x03, 0x38)
+#define ADIS16480_REG_BR_ALM_MAGN ADIS16480_REG(0x03, 0x3A)
+#define ADIS16480_REG_FIRM_REV ADIS16480_REG(0x03, 0x78)
+#define ADIS16480_REG_FIRM_DM ADIS16480_REG(0x03, 0x7A)
+#define ADIS16480_REG_FIRM_Y ADIS16480_REG(0x03, 0x7C)
+
+#define ADIS16480_REG_SERIAL_NUM ADIS16480_REG(0x04, 0x20)
+
+/* Each filter coefficent bank spans two pages */
+#define ADIS16480_FIR_COEF(page) (x < 60 ? ADIS16480_REG(page, (x) + 8) : \
+ ADIS16480_REG((page) + 1, (x) - 60 + 8))
+#define ADIS16480_FIR_COEF_A(x) ADIS16480_FIR_COEF(0x05, (x))
+#define ADIS16480_FIR_COEF_B(x) ADIS16480_FIR_COEF(0x07, (x))
+#define ADIS16480_FIR_COEF_C(x) ADIS16480_FIR_COEF(0x09, (x))
+#define ADIS16480_FIR_COEF_D(x) ADIS16480_FIR_COEF(0x0B, (x))
+
+struct adis16480_chip_info {
+ unsigned int num_channels;
+ const struct iio_chan_spec *channels;
+};
+
+struct adis16480 {
+ const struct adis16480_chip_info *chip_info;
+
+ struct adis adis;
+};
+
+#ifdef CONFIG_DEBUG_FS
+
+static ssize_t adis16480_show_firmware_revision(struct file *file,
+ char __user *userbuf, size_t count, loff_t *ppos)
+{
+ struct adis16480 *adis16480 = file->private_data;
+ char buf[7];
+ size_t len;
+ u16 rev;
+ int ret;
+
+ ret = adis_read_reg_16(&adis16480->adis, ADIS16480_REG_FIRM_REV, &rev);
+ if (ret < 0)
+ return ret;
+
+ len = scnprintf(buf, sizeof(buf), "%x.%x\n", rev >> 8, rev & 0xff);
+
+ return simple_read_from_buffer(userbuf, count, ppos, buf, len);
+}
+
+static const struct file_operations adis16480_firmware_revision_fops = {
+ .open = simple_open,
+ .read = adis16480_show_firmware_revision,
+ .llseek = default_llseek,
+ .owner = THIS_MODULE,
+};
+
+static ssize_t adis16480_show_firmware_date(struct file *file,
+ char __user *userbuf, size_t count, loff_t *ppos)
+{
+ struct adis16480 *adis16480 = file->private_data;
+ u16 md, year;
+ char buf[12];
+ size_t len;
+ int ret;
+
+ ret = adis_read_reg_16(&adis16480->adis, ADIS16480_REG_FIRM_Y, &year);
+ if (ret < 0)
+ return ret;
+
+ ret = adis_read_reg_16(&adis16480->adis, ADIS16480_REG_FIRM_DM, &md);
+ if (ret < 0)
+ return ret;
+
+ len = snprintf(buf, sizeof(buf), "%.2x-%.2x-%.4x\n",
+ md >> 8, md & 0xff, year);
+
+ return simple_read_from_buffer(userbuf, count, ppos, buf, len);
+}
+
+static const struct file_operations adis16480_firmware_date_fops = {
+ .open = simple_open,
+ .read = adis16480_show_firmware_date,
+ .llseek = default_llseek,
+ .owner = THIS_MODULE,
+};
+
+static int adis16480_show_serial_number(void *arg, u64 *val)
+{
+ struct adis16480 *adis16480 = arg;
+ u16 serial;
+ int ret;
+
+ ret = adis_read_reg_16(&adis16480->adis, ADIS16480_REG_SERIAL_NUM,
+ &serial);
+ if (ret < 0)
+ return ret;
+
+ *val = serial;
+
+ return 0;
+}
+DEFINE_SIMPLE_ATTRIBUTE(adis16480_serial_number_fops,
+ adis16480_show_serial_number, NULL, "0x%.4llx\n");
+
+static int adis16480_show_product_id(void *arg, u64 *val)
+{
+ struct adis16480 *adis16480 = arg;
+ u16 prod_id;
+ int ret;
+
+ ret = adis_read_reg_16(&adis16480->adis, ADIS16480_REG_PROD_ID,
+ &prod_id);
+ if (ret < 0)
+ return ret;
+
+ *val = prod_id;
+
+ return 0;
+}
+DEFINE_SIMPLE_ATTRIBUTE(adis16480_product_id_fops,
+ adis16480_show_product_id, NULL, "%llu\n");
+
+static int adis16480_show_flash_count(void *arg, u64 *val)
+{
+ struct adis16480 *adis16480 = arg;
+ u32 flash_count;
+ int ret;
+
+ ret = adis_read_reg_32(&adis16480->adis, ADIS16480_REG_FLASH_CNT,
+ &flash_count);
+ if (ret < 0)
+ return ret;
+
+ *val = flash_count;
+
+ return 0;
+}
+DEFINE_SIMPLE_ATTRIBUTE(adis16480_flash_count_fops,
+ adis16480_show_flash_count, NULL, "%lld\n");
+
+static int adis16480_debugfs_init(struct iio_dev *indio_dev)
+{
+ struct adis16480 *adis16480 = iio_priv(indio_dev);
+
+ debugfs_create_file("firmware_revision", 0400,
+ indio_dev->debugfs_dentry, adis16480,
+ &adis16480_firmware_revision_fops);
+ debugfs_create_file("firmware_date", 0400, indio_dev->debugfs_dentry,
+ adis16480, &adis16480_firmware_date_fops);
+ debugfs_create_file("serial_number", 0400, indio_dev->debugfs_dentry,
+ adis16480, &adis16480_serial_number_fops);
+ debugfs_create_file("product_id", 0400, indio_dev->debugfs_dentry,
+ adis16480, &adis16480_product_id_fops);
+ debugfs_create_file("flash_count", 0400, indio_dev->debugfs_dentry,
+ adis16480, &adis16480_flash_count_fops);
+
+ return 0;
+}
+
+#else
+
+static int adis16480_debugfs_init(struct iio_dev *indio_dev)
+{
+ return 0;
+}
+
+#endif
+
+static int adis16480_set_freq(struct adis16480 *st, unsigned int freq)
+{
+ unsigned int t;
+
+ t = 2460000 / freq;
+ if (t > 2048)
+ t = 2048;
+
+ if (t != 0)
+ t--;
+
+ return adis_write_reg_16(&st->adis, ADIS16480_REG_DEC_RATE, t);
+}
+
+static int adis16480_get_freq(struct adis16480 *st, unsigned int *freq)
+{
+ uint16_t t;
+ int ret;
+
+ ret = adis_read_reg_16(&st->adis, ADIS16480_REG_DEC_RATE, &t);
+ if (ret < 0)
+ return ret;
+
+ *freq = 2460000 / (t + 1);
+
+ return 0;
+}
+
+static ssize_t adis16480_read_frequency(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+ struct adis16480 *st = iio_priv(indio_dev);
+ unsigned int freq;
+ int ret;
+
+ ret = adis16480_get_freq(st, &freq);
+ if (ret < 0)
+ return ret;
+
+ return sprintf(buf, "%d.%.3d\n", freq / 1000, freq % 1000);
+}
+
+static ssize_t adis16480_write_frequency(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t len)
+{
+ struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+ struct adis16480 *st = iio_priv(indio_dev);
+ int freq_int, freq_fract;
+ long val;
+ int ret;
+
+ ret = iio_str_to_fixpoint(buf, 100, &freq_int, &freq_fract);
+ if (ret)
+ return ret;
+
+ val = freq_int * 1000 + freq_fract;
+
+ if (val <= 0)
+ return -EINVAL;
+
+ ret = adis16480_set_freq(st, val);
+
+ return ret ? ret : len;
+}
+
+static IIO_DEV_ATTR_SAMP_FREQ(S_IWUSR | S_IRUGO,
+ adis16480_read_frequency,
+ adis16480_write_frequency);
+
+enum {
+ ADIS16480_SCAN_GYRO_X,
+ ADIS16480_SCAN_GYRO_Y,
+ ADIS16480_SCAN_GYRO_Z,
+ ADIS16480_SCAN_ACCEL_X,
+ ADIS16480_SCAN_ACCEL_Y,
+ ADIS16480_SCAN_ACCEL_Z,
+ ADIS16480_SCAN_MAGN_X,
+ ADIS16480_SCAN_MAGN_Y,
+ ADIS16480_SCAN_MAGN_Z,
+ ADIS16480_SCAN_BARO,
+ ADIS16480_SCAN_TEMP,
+};
+
+static const unsigned int adis16480_calibbias_regs[] = {
+ [ADIS16480_SCAN_GYRO_X] = ADIS16480_REG_X_GYRO_BIAS,
+ [ADIS16480_SCAN_GYRO_Y] = ADIS16480_REG_Y_GYRO_BIAS,
+ [ADIS16480_SCAN_GYRO_Z] = ADIS16480_REG_Z_GYRO_BIAS,
+ [ADIS16480_SCAN_ACCEL_X] = ADIS16480_REG_X_ACCEL_BIAS,
+ [ADIS16480_SCAN_ACCEL_Y] = ADIS16480_REG_Y_ACCEL_BIAS,
+ [ADIS16480_SCAN_ACCEL_Z] = ADIS16480_REG_Z_ACCEL_BIAS,
+ [ADIS16480_SCAN_MAGN_X] = ADIS16480_REG_X_HARD_IRON,
+ [ADIS16480_SCAN_MAGN_Y] = ADIS16480_REG_Y_HARD_IRON,
+ [ADIS16480_SCAN_MAGN_Z] = ADIS16480_REG_Z_HARD_IRON,
+ [ADIS16480_SCAN_BARO] = ADIS16480_REG_BAROM_BIAS,
+};
+
+static const unsigned int adis16480_calibscale_regs[] = {
+ [ADIS16480_SCAN_GYRO_X] = ADIS16480_REG_X_GYRO_SCALE,
+ [ADIS16480_SCAN_GYRO_Y] = ADIS16480_REG_Y_GYRO_SCALE,
+ [ADIS16480_SCAN_GYRO_Z] = ADIS16480_REG_Z_GYRO_SCALE,
+ [ADIS16480_SCAN_ACCEL_X] = ADIS16480_REG_X_ACCEL_SCALE,
+ [ADIS16480_SCAN_ACCEL_Y] = ADIS16480_REG_Y_ACCEL_SCALE,
+ [ADIS16480_SCAN_ACCEL_Z] = ADIS16480_REG_Z_ACCEL_SCALE,
+};
+
+static int adis16480_set_calibbias(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan, int bias)
+{
+ unsigned int reg = adis16480_calibbias_regs[chan->scan_index];
+ struct adis16480 *st = iio_priv(indio_dev);
+
+ switch (chan->type) {
+ case IIO_MAGN:
+ case IIO_PRESSURE:
+ if (bias < -0x8000 || bias >= 0x8000)
+ return -EINVAL;
+ return adis_write_reg_16(&st->adis, reg, bias);
+ case IIO_ANGL_VEL:
+ case IIO_ACCEL:
+ return adis_write_reg_32(&st->adis, reg, bias);
+ default:
+ break;
+ }
+
+ return -EINVAL;
+}
+
+static int adis16480_get_calibbias(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan, int *bias)
+{
+ unsigned int reg = adis16480_calibbias_regs[chan->scan_index];
+ struct adis16480 *st = iio_priv(indio_dev);
+ uint16_t val16;
+ uint32_t val32;
+ int ret;
+
+ switch (chan->type) {
+ case IIO_MAGN:
+ case IIO_PRESSURE:
+ ret = adis_read_reg_16(&st->adis, reg, &val16);
+ *bias = sign_extend32(val16, 15);
+ break;
+ case IIO_ANGL_VEL:
+ case IIO_ACCEL:
+ ret = adis_read_reg_32(&st->adis, reg, &val32);
+ *bias = sign_extend32(val32, 31);
+ break;
+ default:
+ ret = -EINVAL;
+ }
+
+ if (ret < 0)
+ return ret;
+
+ return IIO_VAL_INT;
+}
+
+static int adis16480_set_calibscale(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan, int scale)
+{
+ unsigned int reg = adis16480_calibscale_regs[chan->scan_index];
+ struct adis16480 *st = iio_priv(indio_dev);
+
+ if (scale < -0x8000 || scale >= 0x8000)
+ return -EINVAL;
+
+ return adis_write_reg_16(&st->adis, reg, scale);
+}
+
+static int adis16480_get_calibscale(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan, int *scale)
+{
+ unsigned int reg = adis16480_calibscale_regs[chan->scan_index];
+ struct adis16480 *st = iio_priv(indio_dev);
+ uint16_t val16;
+ int ret;
+
+ ret = adis_read_reg_16(&st->adis, reg, &val16);
+ if (ret < 0)
+ return ret;
+
+ *scale = sign_extend32(val16, 15);
+ return IIO_VAL_INT;
+}
+
+static const unsigned int adis16480_def_filter_freqs[] = {
+ 310,
+ 55,
+ 275,
+ 63,
+};
+
+static const unsigned int ad16480_filter_data[][2] = {
+ [ADIS16480_SCAN_GYRO_X] = { ADIS16480_REG_FILTER_BNK0, 0 },
+ [ADIS16480_SCAN_GYRO_Y] = { ADIS16480_REG_FILTER_BNK0, 3 },
+ [ADIS16480_SCAN_GYRO_Z] = { ADIS16480_REG_FILTER_BNK0, 6 },
+ [ADIS16480_SCAN_ACCEL_X] = { ADIS16480_REG_FILTER_BNK0, 9 },
+ [ADIS16480_SCAN_ACCEL_Y] = { ADIS16480_REG_FILTER_BNK0, 12 },
+ [ADIS16480_SCAN_ACCEL_Z] = { ADIS16480_REG_FILTER_BNK1, 0 },
+ [ADIS16480_SCAN_MAGN_X] = { ADIS16480_REG_FILTER_BNK1, 3 },
+ [ADIS16480_SCAN_MAGN_Y] = { ADIS16480_REG_FILTER_BNK1, 6 },
+ [ADIS16480_SCAN_MAGN_Z] = { ADIS16480_REG_FILTER_BNK1, 9 },
+};
+
+static int adis16480_get_filter_freq(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan, int *freq)
+{
+ struct adis16480 *st = iio_priv(indio_dev);
+ unsigned int enable_mask, offset, reg;
+ uint16_t val;
+ int ret;
+
+ reg = ad16480_filter_data[chan->scan_index][0];
+ offset = ad16480_filter_data[chan->scan_index][1];
+ enable_mask = BIT(offset + 2);
+
+ ret = adis_read_reg_16(&st->adis, reg, &val);
+ if (ret < 0)
+ return ret;
+
+ if (!(val & enable_mask))
+ *freq = 0;
+ else
+ *freq = adis16480_def_filter_freqs[(val >> offset) & 0x3];
+
+ return IIO_VAL_INT;
+}
+
+static int adis16480_set_filter_freq(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan, unsigned int freq)
+{
+ struct adis16480 *st = iio_priv(indio_dev);
+ unsigned int enable_mask, offset, reg;
+ unsigned int diff, best_diff;
+ unsigned int i, best_freq;
+ uint16_t val;
+ int ret;
+
+ reg = ad16480_filter_data[chan->scan_index][0];
+ offset = ad16480_filter_data[chan->scan_index][1];
+ enable_mask = BIT(offset + 2);
+
+ ret = adis_read_reg_16(&st->adis, reg, &val);
+ if (ret < 0)
+ return ret;
+
+ if (freq == 0) {
+ val &= ~enable_mask;
+ } else {
+ best_freq = 0;
+ best_diff = 310;
+ for (i = 0; i < ARRAY_SIZE(adis16480_def_filter_freqs); i++) {
+ if (adis16480_def_filter_freqs[i] >= freq) {
+ diff = adis16480_def_filter_freqs[i] - freq;
+ if (diff < best_diff) {
+ best_diff = diff;
+ best_freq = i;
+ }
+ }
+ }
+
+ val &= ~(0x3 << offset);
+ val |= best_freq << offset;
+ val |= enable_mask;
+ }
+
+ return adis_write_reg_16(&st->adis, reg, val);
+}
+
+static int adis16480_read_raw(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan, int *val, int *val2, long info)
+{
+ switch (info) {
+ case IIO_CHAN_INFO_RAW:
+ return adis_single_conversion(indio_dev, chan, 0, val);
+ case IIO_CHAN_INFO_SCALE:
+ switch (chan->type) {
+ case IIO_ANGL_VEL:
+ *val = 0;
+ *val2 = IIO_DEGREE_TO_RAD(20000); /* 0.02 degree/sec */
+ return IIO_VAL_INT_PLUS_MICRO;
+ case IIO_ACCEL:
+ *val = 0;
+ *val2 = IIO_G_TO_M_S_2(800); /* 0.8 mg */
+ return IIO_VAL_INT_PLUS_MICRO;
+ case IIO_MAGN:
+ *val = 0;
+ *val2 = 100; /* 0.0001 gauss */
+ return IIO_VAL_INT_PLUS_MICRO;
+ case IIO_TEMP:
+ *val = 5;
+ *val2 = 650000; /* 5.65 milli degree Celsius */
+ return IIO_VAL_INT_PLUS_MICRO;
+ case IIO_PRESSURE:
+ *val = 0;
+ *val2 = 4000; /* 40ubar = 0.004 kPa */
+ return IIO_VAL_INT_PLUS_MICRO;
+ default:
+ return -EINVAL;
+ }
+ case IIO_CHAN_INFO_OFFSET:
+ /* Only the temperature channel has a offset */
+ *val = 4425; /* 25 degree Celsius = 0x0000 */
+ return IIO_VAL_INT;
+ case IIO_CHAN_INFO_CALIBBIAS:
+ return adis16480_get_calibbias(indio_dev, chan, val);
+ case IIO_CHAN_INFO_CALIBSCALE:
+ return adis16480_get_calibscale(indio_dev, chan, val);
+ case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
+ return adis16480_get_filter_freq(indio_dev, chan, val);
+ default:
+ return -EINVAL;
+ }
+}
+
+static int adis16480_write_raw(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan, int val, int val2, long info)
+{
+ switch (info) {
+ case IIO_CHAN_INFO_CALIBBIAS:
+ return adis16480_set_calibbias(indio_dev, chan, val);
+ case IIO_CHAN_INFO_CALIBSCALE:
+ return adis16480_set_calibscale(indio_dev, chan, val);
+ case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
+ return adis16480_set_filter_freq(indio_dev, chan, val);
+ default:
+ return -EINVAL;
+ }
+}
+
+#define ADIS16480_MOD_CHANNEL(_type, _mod, _address, _si, _info, _bits) \
+ { \
+ .type = (_type), \
+ .modified = 1, \
+ .channel2 = (_mod), \
+ .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | \
+ IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT | \
+ IIO_CHAN_INFO_SCALE_SHARED_BIT | \
+ _info, \
+ .address = (_address), \
+ .scan_index = (_si), \
+ .scan_type = { \
+ .sign = 's', \
+ .realbits = (_bits), \
+ .storagebits = (_bits), \
+ .endianness = IIO_BE, \
+ }, \
+ }
+
+#define ADIS16480_GYRO_CHANNEL(_mod) \
+ ADIS16480_MOD_CHANNEL(IIO_ANGL_VEL, IIO_MOD_ ## _mod, \
+ ADIS16480_REG_ ## _mod ## _GYRO_OUT, ADIS16480_SCAN_GYRO_ ## _mod, \
+ IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY_SEPARATE_BIT | \
+ IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT, \
+ 32)
+
+#define ADIS16480_ACCEL_CHANNEL(_mod) \
+ ADIS16480_MOD_CHANNEL(IIO_ACCEL, IIO_MOD_ ## _mod, \
+ ADIS16480_REG_ ## _mod ## _ACCEL_OUT, ADIS16480_SCAN_ACCEL_ ## _mod, \
+ IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY_SEPARATE_BIT | \
+ IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT, \
+ 32)
+
+#define ADIS16480_MAGN_CHANNEL(_mod) \
+ ADIS16480_MOD_CHANNEL(IIO_MAGN, IIO_MOD_ ## _mod, \
+ ADIS16480_REG_ ## _mod ## _MAGN_OUT, ADIS16480_SCAN_MAGN_ ## _mod, \
+ IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY_SEPARATE_BIT, \
+ 16)
+
+#define ADIS16480_PRESSURE_CHANNEL() \
+ { \
+ .type = IIO_PRESSURE, \
+ .indexed = 1, \
+ .channel = 0, \
+ .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | \
+ IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT | \
+ IIO_CHAN_INFO_SCALE_SEPARATE_BIT, \
+ .address = ADIS16480_REG_BAROM_OUT, \
+ .scan_index = ADIS16480_SCAN_BARO, \
+ .scan_type = { \
+ .sign = 's', \
+ .realbits = 32, \
+ .storagebits = 32, \
+ .endianness = IIO_BE, \
+ }, \
+ }
+
+#define ADIS16480_TEMP_CHANNEL() { \
+ .type = IIO_TEMP, \
+ .indexed = 1, \
+ .channel = 0, \
+ .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | \
+ IIO_CHAN_INFO_SCALE_SEPARATE_BIT | \
+ IIO_CHAN_INFO_OFFSET_SEPARATE_BIT, \
+ .address = ADIS16480_REG_TEMP_OUT, \
+ .scan_index = ADIS16480_SCAN_TEMP, \
+ .scan_type = { \
+ .sign = 's', \
+ .realbits = 16, \
+ .storagebits = 16, \
+ .endianness = IIO_BE, \
+ }, \
+ }
+
+static const struct iio_chan_spec adis16480_channels[] = {
+ ADIS16480_GYRO_CHANNEL(X),
+ ADIS16480_GYRO_CHANNEL(Y),
+ ADIS16480_GYRO_CHANNEL(Z),
+ ADIS16480_ACCEL_CHANNEL(X),
+ ADIS16480_ACCEL_CHANNEL(Y),
+ ADIS16480_ACCEL_CHANNEL(Z),
+ ADIS16480_MAGN_CHANNEL(X),
+ ADIS16480_MAGN_CHANNEL(Y),
+ ADIS16480_MAGN_CHANNEL(Z),
+ ADIS16480_PRESSURE_CHANNEL(),
+ ADIS16480_TEMP_CHANNEL(),
+ IIO_CHAN_SOFT_TIMESTAMP(11)
+};
+
+static const struct iio_chan_spec adis16485_channels[] = {
+ ADIS16480_GYRO_CHANNEL(X),
+ ADIS16480_GYRO_CHANNEL(Y),
+ ADIS16480_GYRO_CHANNEL(Z),
+ ADIS16480_ACCEL_CHANNEL(X),
+ ADIS16480_ACCEL_CHANNEL(Y),
+ ADIS16480_ACCEL_CHANNEL(Z),
+ ADIS16480_TEMP_CHANNEL(),
+ IIO_CHAN_SOFT_TIMESTAMP(7)
+};
+
+enum adis16480_variant {
+ ADIS16375,
+ ADIS16480,
+ ADIS16485,
+ ADIS16488,
+};
+
+static const struct adis16480_chip_info adis16480_chip_info[] = {
+ [ADIS16375] = {
+ .channels = adis16485_channels,
+ .num_channels = ARRAY_SIZE(adis16485_channels),
+ },
+ [ADIS16480] = {
+ .channels = adis16480_channels,
+ .num_channels = ARRAY_SIZE(adis16480_channels),
+ },
+ [ADIS16485] = {
+ .channels = adis16485_channels,
+ .num_channels = ARRAY_SIZE(adis16485_channels),
+ },
+ [ADIS16488] = {
+ .channels = adis16480_channels,
+ .num_channels = ARRAY_SIZE(adis16480_channels),
+ },
+};
+
+static struct attribute *adis16480_attributes[] = {
+ &iio_dev_attr_sampling_frequency.dev_attr.attr,
+ NULL
+};
+
+static const struct attribute_group adis16480_attribute_group = {
+ .attrs = adis16480_attributes,
+};
+
+static const struct iio_info adis16480_info = {
+ .attrs = &adis16480_attribute_group,
+ .read_raw = &adis16480_read_raw,
+ .write_raw = &adis16480_write_raw,
+ .update_scan_mode = adis_update_scan_mode,
+ .driver_module = THIS_MODULE,
+};
+
+static int adis16480_stop_device(struct iio_dev *indio_dev)
+{
+ struct adis16480 *st = iio_priv(indio_dev);
+ int ret;
+
+ ret = adis_write_reg_16(&st->adis, ADIS16480_REG_SLP_CNT, BIT(9));
+ if (ret)
+ dev_err(&indio_dev->dev,
+ "Could not power down device: %d\n", ret);
+
+ return ret;
+}
+
+static int adis16480_enable_irq(struct adis *adis, bool enable)
+{
+ return adis_write_reg_16(adis, ADIS16480_REG_FNCTIO_CTRL,
+ enable ? BIT(3) : 0);
+}
+
+static int adis16480_initial_setup(struct iio_dev *indio_dev)
+{
+ struct adis16480 *st = iio_priv(indio_dev);
+ uint16_t prod_id;
+ unsigned int device_id;
+ int ret;
+
+ adis_reset(&st->adis);
+ msleep(70);
+
+ ret = adis_write_reg_16(&st->adis, ADIS16480_REG_GLOB_CMD, BIT(1));
+ if (ret)
+ return ret;
+ msleep(30);
+
+ ret = adis_check_status(&st->adis);
+ if (ret)
+ return ret;
+
+ ret = adis_read_reg_16(&st->adis, ADIS16480_REG_PROD_ID, &prod_id);
+ if (ret)
+ return ret;
+
+ sscanf(indio_dev->name, "adis%u\n", &device_id);
+
+ if (prod_id != device_id)
+ dev_warn(&indio_dev->dev, "Device ID(%u) and product ID(%u) do not match.",
+ device_id, prod_id);
+
+ return 0;
+}
+
+#define ADIS16480_DIAG_STAT_XGYRO_FAIL 0
+#define ADIS16480_DIAG_STAT_YGYRO_FAIL 1
+#define ADIS16480_DIAG_STAT_ZGYRO_FAIL 2
+#define ADIS16480_DIAG_STAT_XACCL_FAIL 3
+#define ADIS16480_DIAG_STAT_YACCL_FAIL 4
+#define ADIS16480_DIAG_STAT_ZACCL_FAIL 5
+#define ADIS16480_DIAG_STAT_XMAGN_FAIL 8
+#define ADIS16480_DIAG_STAT_YMAGN_FAIL 9
+#define ADIS16480_DIAG_STAT_ZMAGN_FAIL 10
+#define ADIS16480_DIAG_STAT_BARO_FAIL 11
+
+static const char * const adis16480_status_error_msgs[] = {
+ [ADIS16480_DIAG_STAT_XGYRO_FAIL] = "X-axis gyroscope self-test failure",
+ [ADIS16480_DIAG_STAT_YGYRO_FAIL] = "Y-axis gyroscope self-test failure",
+ [ADIS16480_DIAG_STAT_ZGYRO_FAIL] = "Z-axis gyroscope self-test failure",
+ [ADIS16480_DIAG_STAT_XACCL_FAIL] = "X-axis accelerometer self-test failure",
+ [ADIS16480_DIAG_STAT_YACCL_FAIL] = "Y-axis accelerometer self-test failure",
+ [ADIS16480_DIAG_STAT_ZACCL_FAIL] = "Z-axis accelerometer self-test failure",
+ [ADIS16480_DIAG_STAT_XMAGN_FAIL] = "X-axis magnetometer self-test failure",
+ [ADIS16480_DIAG_STAT_YMAGN_FAIL] = "Y-axis magnetometer self-test failure",
+ [ADIS16480_DIAG_STAT_ZMAGN_FAIL] = "Z-axis magnetometer self-test failure",
+ [ADIS16480_DIAG_STAT_BARO_FAIL] = "Barometer self-test failure",
+};
+
+static const struct adis_data adis16480_data = {
+ .diag_stat_reg = ADIS16480_REG_DIAG_STS,
+ .glob_cmd_reg = ADIS16480_REG_GLOB_CMD,
+ .has_paging = true,
+
+ .read_delay = 5,
+ .write_delay = 5,
+
+ .status_error_msgs = adis16480_status_error_msgs,
+ .status_error_mask = BIT(ADIS16480_DIAG_STAT_XGYRO_FAIL) |
+ BIT(ADIS16480_DIAG_STAT_YGYRO_FAIL) |
+ BIT(ADIS16480_DIAG_STAT_ZGYRO_FAIL) |
+ BIT(ADIS16480_DIAG_STAT_XACCL_FAIL) |
+ BIT(ADIS16480_DIAG_STAT_YACCL_FAIL) |
+ BIT(ADIS16480_DIAG_STAT_ZACCL_FAIL) |
+ BIT(ADIS16480_DIAG_STAT_XMAGN_FAIL) |
+ BIT(ADIS16480_DIAG_STAT_YMAGN_FAIL) |
+ BIT(ADIS16480_DIAG_STAT_ZMAGN_FAIL) |
+ BIT(ADIS16480_DIAG_STAT_BARO_FAIL),
+
+ .enable_irq = adis16480_enable_irq,
+};
+
+static int adis16480_probe(struct spi_device *spi)
+{
+ const struct spi_device_id *id = spi_get_device_id(spi);
+ struct iio_dev *indio_dev;
+ struct adis16480 *st;
+ int ret;
+
+ indio_dev = iio_device_alloc(sizeof(*st));
+ if (indio_dev == NULL)
+ return -ENOMEM;
+
+ spi_set_drvdata(spi, indio_dev);
+
+ st = iio_priv(indio_dev);
+
+ st->chip_info = &adis16480_chip_info[id->driver_data];
+ indio_dev->dev.parent = &spi->dev;
+ indio_dev->name = spi_get_device_id(spi)->name;
+ indio_dev->channels = st->chip_info->channels;
+ indio_dev->num_channels = st->chip_info->num_channels;
+ indio_dev->info = &adis16480_info;
+ indio_dev->modes = INDIO_DIRECT_MODE;
+
+ ret = adis_init(&st->adis, indio_dev, spi, &adis16480_data);
+ if (ret)
+ goto error_free_dev;
+
+ ret = adis_setup_buffer_and_trigger(&st->adis, indio_dev, NULL);
+ if (ret)
+ goto error_free_dev;
+
+ ret = adis16480_initial_setup(indio_dev);
+ if (ret)
+ goto error_cleanup_buffer;
+
+ ret = iio_device_register(indio_dev);
+ if (ret)
+ goto error_stop_device;
+
+ adis16480_debugfs_init(indio_dev);
+
+ return 0;
+
+error_stop_device:
+ adis16480_stop_device(indio_dev);
+error_cleanup_buffer:
+ adis_cleanup_buffer_and_trigger(&st->adis, indio_dev);
+error_free_dev:
+ iio_device_free(indio_dev);
+ return ret;
+}
+
+static int adis16480_remove(struct spi_device *spi)
+{
+ struct iio_dev *indio_dev = spi_get_drvdata(spi);
+ struct adis16480 *st = iio_priv(indio_dev);
+
+ iio_device_unregister(indio_dev);
+ adis16480_stop_device(indio_dev);
+
+ adis_cleanup_buffer_and_trigger(&st->adis, indio_dev);
+
+ iio_device_free(indio_dev);
+
+ return 0;
+}
+
+static const struct spi_device_id adis16480_ids[] = {
+ { "adis16375", ADIS16375 },
+ { "adis16480", ADIS16480 },
+ { "adis16485", ADIS16485 },
+ { "adis16488", ADIS16488 },
+ { }
+};
+MODULE_DEVICE_TABLE(spi, adis16480_ids);
+
+static struct spi_driver adis16480_driver = {
+ .driver = {
+ .name = "adis16480",
+ .owner = THIS_MODULE,
+ },
+ .id_table = adis16480_ids,
+ .probe = adis16480_probe,
+ .remove = adis16480_remove,
+};
+module_spi_driver(adis16480_driver);
+
+MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
+MODULE_DESCRIPTION("Analog Devices ADIS16480 IMU driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/imu/adis_buffer.c b/drivers/iio/imu/adis_buffer.c
new file mode 100644
index 0000000..99d8e0b
--- /dev/null
+++ b/drivers/iio/imu/adis_buffer.c
@@ -0,0 +1,176 @@
+/*
+ * Common library for ADIS16XXX devices
+ *
+ * Copyright 2012 Analog Devices Inc.
+ * Author: Lars-Peter Clausen <lars@metafoo.de>
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/export.h>
+#include <linux/interrupt.h>
+#include <linux/mutex.h>
+#include <linux/kernel.h>
+#include <linux/spi/spi.h>
+#include <linux/slab.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/iio/imu/adis.h>
+
+int adis_update_scan_mode(struct iio_dev *indio_dev,
+ const unsigned long *scan_mask)
+{
+ struct adis *adis = iio_device_get_drvdata(indio_dev);
+ const struct iio_chan_spec *chan;
+ unsigned int scan_count;
+ unsigned int i, j;
+ __be16 *tx, *rx;
+
+ kfree(adis->xfer);
+ kfree(adis->buffer);
+
+ scan_count = indio_dev->scan_bytes / 2;
+
+ adis->xfer = kcalloc(scan_count + 1, sizeof(*adis->xfer), GFP_KERNEL);
+ if (!adis->xfer)
+ return -ENOMEM;
+
+ adis->buffer = kzalloc(indio_dev->scan_bytes * 2, GFP_KERNEL);
+ if (!adis->buffer)
+ return -ENOMEM;
+
+ rx = adis->buffer;
+ tx = rx + indio_dev->scan_bytes;
+
+ spi_message_init(&adis->msg);
+
+ for (j = 0; j <= scan_count; j++) {
+ adis->xfer[j].bits_per_word = 8;
+ if (j != scan_count)
+ adis->xfer[j].cs_change = 1;
+ adis->xfer[j].len = 2;
+ adis->xfer[j].delay_usecs = adis->data->read_delay;
+ if (j < scan_count)
+ adis->xfer[j].tx_buf = &tx[j];
+ if (j >= 1)
+ adis->xfer[j].rx_buf = &rx[j - 1];
+ spi_message_add_tail(&adis->xfer[j], &adis->msg);
+ }
+
+ chan = indio_dev->channels;
+ for (i = 0; i < indio_dev->num_channels; i++, chan++) {
+ if (!test_bit(chan->scan_index, scan_mask))
+ continue;
+ if (chan->scan_type.storagebits == 32)
+ *tx++ = cpu_to_be16((chan->address + 2) << 8);
+ *tx++ = cpu_to_be16(chan->address << 8);
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(adis_update_scan_mode);
+
+static irqreturn_t adis_trigger_handler(int irq, void *p)
+{
+ struct iio_poll_func *pf = p;
+ struct iio_dev *indio_dev = pf->indio_dev;
+ struct adis *adis = iio_device_get_drvdata(indio_dev);
+ int ret;
+
+ if (!adis->buffer)
+ return -ENOMEM;
+
+ if (adis->data->has_paging) {
+ mutex_lock(&adis->txrx_lock);
+ if (adis->current_page != 0) {
+ adis->tx[0] = ADIS_WRITE_REG(ADIS_REG_PAGE_ID);
+ adis->tx[1] = 0;
+ spi_write(adis->spi, adis->tx, 2);
+ }
+ }
+
+ ret = spi_sync(adis->spi, &adis->msg);
+ if (ret)
+ dev_err(&adis->spi->dev, "Failed to read data: %d", ret);
+
+
+ if (adis->data->has_paging) {
+ adis->current_page = 0;
+ mutex_unlock(&adis->txrx_lock);
+ }
+
+ /* Guaranteed to be aligned with 8 byte boundary */
+ if (indio_dev->scan_timestamp) {
+ void *b = adis->buffer + indio_dev->scan_bytes - sizeof(s64);
+ *(s64 *)b = pf->timestamp;
+ }
+
+ iio_push_to_buffers(indio_dev, adis->buffer);
+
+ iio_trigger_notify_done(indio_dev->trig);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * adis_setup_buffer_and_trigger() - Sets up buffer and trigger for the adis device
+ * @adis: The adis device.
+ * @indio_dev: The IIO device.
+ * @trigger_handler: Optional trigger handler, may be NULL.
+ *
+ * Returns 0 on success, a negative error code otherwise.
+ *
+ * This function sets up the buffer and trigger for a adis devices. If
+ * 'trigger_handler' is NULL the default trigger handler will be used. The
+ * default trigger handler will simply read the registers assigned to the
+ * currently active channels.
+ *
+ * adis_cleanup_buffer_and_trigger() should be called to free the resources
+ * allocated by this function.
+ */
+int adis_setup_buffer_and_trigger(struct adis *adis, struct iio_dev *indio_dev,
+ irqreturn_t (*trigger_handler)(int, void *))
+{
+ int ret;
+
+ if (!trigger_handler)
+ trigger_handler = adis_trigger_handler;
+
+ ret = iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time,
+ trigger_handler, NULL);
+ if (ret)
+ return ret;
+
+ if (adis->spi->irq) {
+ ret = adis_probe_trigger(adis, indio_dev);
+ if (ret)
+ goto error_buffer_cleanup;
+ }
+ return 0;
+
+error_buffer_cleanup:
+ iio_triggered_buffer_cleanup(indio_dev);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(adis_setup_buffer_and_trigger);
+
+/**
+ * adis_cleanup_buffer_and_trigger() - Free buffer and trigger resources
+ * @adis: The adis device.
+ * @indio_dev: The IIO device.
+ *
+ * Frees resources allocated by adis_setup_buffer_and_trigger()
+ */
+void adis_cleanup_buffer_and_trigger(struct adis *adis,
+ struct iio_dev *indio_dev)
+{
+ if (adis->spi->irq)
+ adis_remove_trigger(adis);
+ kfree(adis->buffer);
+ kfree(adis->xfer);
+ iio_triggered_buffer_cleanup(indio_dev);
+}
+EXPORT_SYMBOL_GPL(adis_cleanup_buffer_and_trigger);
diff --git a/drivers/iio/imu/adis_trigger.c b/drivers/iio/imu/adis_trigger.c
new file mode 100644
index 0000000..5a24c9c
--- /dev/null
+++ b/drivers/iio/imu/adis_trigger.c
@@ -0,0 +1,89 @@
+/*
+ * Common library for ADIS16XXX devices
+ *
+ * Copyright 2012 Analog Devices Inc.
+ * Author: Lars-Peter Clausen <lars@metafoo.de>
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/spi/spi.h>
+#include <linux/export.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/imu/adis.h>
+
+static int adis_data_rdy_trigger_set_state(struct iio_trigger *trig,
+ bool state)
+{
+ struct adis *adis = trig->private_data;
+
+ return adis_enable_irq(adis, state);
+}
+
+static const struct iio_trigger_ops adis_trigger_ops = {
+ .owner = THIS_MODULE,
+ .set_trigger_state = &adis_data_rdy_trigger_set_state,
+};
+
+/**
+ * adis_probe_trigger() - Sets up trigger for a adis device
+ * @adis: The adis device
+ * @indio_dev: The IIO device
+ *
+ * Returns 0 on success or a negative error code
+ *
+ * adis_remove_trigger() should be used to free the trigger.
+ */
+int adis_probe_trigger(struct adis *adis, struct iio_dev *indio_dev)
+{
+ int ret;
+
+ adis->trig = iio_trigger_alloc("%s-dev%d", indio_dev->name,
+ indio_dev->id);
+ if (adis->trig == NULL)
+ return -ENOMEM;
+
+ ret = request_irq(adis->spi->irq,
+ &iio_trigger_generic_data_rdy_poll,
+ IRQF_TRIGGER_RISING,
+ indio_dev->name,
+ adis->trig);
+ if (ret)
+ goto error_free_trig;
+
+ adis->trig->dev.parent = &adis->spi->dev;
+ adis->trig->ops = &adis_trigger_ops;
+ adis->trig->private_data = adis;
+ ret = iio_trigger_register(adis->trig);
+
+ indio_dev->trig = adis->trig;
+ if (ret)
+ goto error_free_irq;
+
+ return 0;
+
+error_free_irq:
+ free_irq(adis->spi->irq, adis->trig);
+error_free_trig:
+ iio_trigger_free(adis->trig);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(adis_probe_trigger);
+
+/**
+ * adis_remove_trigger() - Remove trigger for a adis devices
+ * @adis: The adis device
+ *
+ * Removes the trigger previously registered with adis_probe_trigger().
+ */
+void adis_remove_trigger(struct adis *adis)
+{
+ iio_trigger_unregister(adis->trig);
+ free_irq(adis->spi->irq, adis->trig);
+ iio_trigger_free(adis->trig);
+}
+EXPORT_SYMBOL_GPL(adis_remove_trigger);
diff --git a/drivers/iio/industrialio-buffer.c b/drivers/iio/industrialio-buffer.c
index d4ad374..aaadd32 100644
--- a/drivers/iio/industrialio-buffer.c
+++ b/drivers/iio/industrialio-buffer.c
@@ -31,6 +31,18 @@
[IIO_LE] = "le",
};
+static bool iio_buffer_is_active(struct iio_dev *indio_dev,
+ struct iio_buffer *buf)
+{
+ struct list_head *p;
+
+ list_for_each(p, &indio_dev->buffer_list)
+ if (p == &buf->buffer_list)
+ return true;
+
+ return false;
+}
+
/**
* iio_buffer_read_first_n_outer() - chrdev read for buffer access
*
@@ -134,7 +146,7 @@
if (ret < 0)
return ret;
mutex_lock(&indio_dev->mlock);
- if (iio_buffer_enabled(indio_dev)) {
+ if (iio_buffer_is_active(indio_dev, indio_dev->buffer)) {
ret = -EBUSY;
goto error_ret;
}
@@ -180,12 +192,11 @@
return ret;
mutex_lock(&indio_dev->mlock);
- if (iio_buffer_enabled(indio_dev)) {
+ if (iio_buffer_is_active(indio_dev, indio_dev->buffer)) {
ret = -EBUSY;
goto error_ret;
}
indio_dev->buffer->scan_timestamp = state;
- indio_dev->scan_timestamp = state;
error_ret:
mutex_unlock(&indio_dev->mlock);
@@ -371,12 +382,12 @@
const char *buf,
size_t len)
{
- int ret;
- ulong val;
struct iio_dev *indio_dev = dev_to_iio_dev(dev);
struct iio_buffer *buffer = indio_dev->buffer;
+ unsigned int val;
+ int ret;
- ret = strict_strtoul(buf, 10, &val);
+ ret = kstrtouint(buf, 10, &val);
if (ret)
return ret;
@@ -385,7 +396,7 @@
return len;
mutex_lock(&indio_dev->mlock);
- if (iio_buffer_enabled(indio_dev)) {
+ if (iio_buffer_is_active(indio_dev, indio_dev->buffer)) {
ret = -EBUSY;
} else {
if (buffer->access->set_length)
@@ -398,102 +409,14 @@
}
EXPORT_SYMBOL(iio_buffer_write_length);
-ssize_t iio_buffer_store_enable(struct device *dev,
- struct device_attribute *attr,
- const char *buf,
- size_t len)
-{
- int ret;
- bool requested_state, current_state;
- int previous_mode;
- struct iio_dev *indio_dev = dev_to_iio_dev(dev);
- struct iio_buffer *buffer = indio_dev->buffer;
-
- mutex_lock(&indio_dev->mlock);
- previous_mode = indio_dev->currentmode;
- requested_state = !(buf[0] == '0');
- current_state = iio_buffer_enabled(indio_dev);
- if (current_state == requested_state) {
- printk(KERN_INFO "iio-buffer, current state requested again\n");
- goto done;
- }
- if (requested_state) {
- if (indio_dev->setup_ops->preenable) {
- ret = indio_dev->setup_ops->preenable(indio_dev);
- if (ret) {
- printk(KERN_ERR
- "Buffer not started: "
- "buffer preenable failed\n");
- goto error_ret;
- }
- }
- if (buffer->access->request_update) {
- ret = buffer->access->request_update(buffer);
- if (ret) {
- printk(KERN_INFO
- "Buffer not started: "
- "buffer parameter update failed\n");
- goto error_ret;
- }
- }
- /* Definitely possible for devices to support both of these. */
- if (indio_dev->modes & INDIO_BUFFER_TRIGGERED) {
- if (!indio_dev->trig) {
- printk(KERN_INFO
- "Buffer not started: no trigger\n");
- ret = -EINVAL;
- goto error_ret;
- }
- indio_dev->currentmode = INDIO_BUFFER_TRIGGERED;
- } else if (indio_dev->modes & INDIO_BUFFER_HARDWARE)
- indio_dev->currentmode = INDIO_BUFFER_HARDWARE;
- else { /* should never be reached */
- ret = -EINVAL;
- goto error_ret;
- }
-
- if (indio_dev->setup_ops->postenable) {
- ret = indio_dev->setup_ops->postenable(indio_dev);
- if (ret) {
- printk(KERN_INFO
- "Buffer not started: "
- "postenable failed\n");
- indio_dev->currentmode = previous_mode;
- if (indio_dev->setup_ops->postdisable)
- indio_dev->setup_ops->
- postdisable(indio_dev);
- goto error_ret;
- }
- }
- } else {
- if (indio_dev->setup_ops->predisable) {
- ret = indio_dev->setup_ops->predisable(indio_dev);
- if (ret)
- goto error_ret;
- }
- indio_dev->currentmode = INDIO_DIRECT_MODE;
- if (indio_dev->setup_ops->postdisable) {
- ret = indio_dev->setup_ops->postdisable(indio_dev);
- if (ret)
- goto error_ret;
- }
- }
-done:
- mutex_unlock(&indio_dev->mlock);
- return len;
-
-error_ret:
- mutex_unlock(&indio_dev->mlock);
- return ret;
-}
-EXPORT_SYMBOL(iio_buffer_store_enable);
-
ssize_t iio_buffer_show_enable(struct device *dev,
struct device_attribute *attr,
char *buf)
{
struct iio_dev *indio_dev = dev_to_iio_dev(dev);
- return sprintf(buf, "%d\n", iio_buffer_enabled(indio_dev));
+ return sprintf(buf, "%d\n",
+ iio_buffer_is_active(indio_dev,
+ indio_dev->buffer));
}
EXPORT_SYMBOL(iio_buffer_show_enable);
@@ -537,35 +460,220 @@
return bytes;
}
-int iio_sw_buffer_preenable(struct iio_dev *indio_dev)
+int iio_update_buffers(struct iio_dev *indio_dev,
+ struct iio_buffer *insert_buffer,
+ struct iio_buffer *remove_buffer)
{
- struct iio_buffer *buffer = indio_dev->buffer;
- dev_dbg(&indio_dev->dev, "%s\n", __func__);
+ int ret;
+ int success = 0;
+ struct iio_buffer *buffer;
+ unsigned long *compound_mask;
+ const unsigned long *old_mask;
- /* How much space will the demuxed element take? */
- indio_dev->scan_bytes =
- iio_compute_scan_bytes(indio_dev, buffer->scan_mask,
- buffer->scan_timestamp);
- buffer->access->set_bytes_per_datum(buffer, indio_dev->scan_bytes);
+ /* Wind down existing buffers - iff there are any */
+ if (!list_empty(&indio_dev->buffer_list)) {
+ if (indio_dev->setup_ops->predisable) {
+ ret = indio_dev->setup_ops->predisable(indio_dev);
+ if (ret)
+ goto error_ret;
+ }
+ indio_dev->currentmode = INDIO_DIRECT_MODE;
+ if (indio_dev->setup_ops->postdisable) {
+ ret = indio_dev->setup_ops->postdisable(indio_dev);
+ if (ret)
+ goto error_ret;
+ }
+ }
+ /* Keep a copy of current setup to allow roll back */
+ old_mask = indio_dev->active_scan_mask;
+ if (!indio_dev->available_scan_masks)
+ indio_dev->active_scan_mask = NULL;
+
+ if (remove_buffer)
+ list_del(&remove_buffer->buffer_list);
+ if (insert_buffer)
+ list_add(&insert_buffer->buffer_list, &indio_dev->buffer_list);
+
+ /* If no buffers in list, we are done */
+ if (list_empty(&indio_dev->buffer_list)) {
+ indio_dev->currentmode = INDIO_DIRECT_MODE;
+ if (indio_dev->available_scan_masks == NULL)
+ kfree(old_mask);
+ return 0;
+ }
/* What scan mask do we actually have ?*/
- if (indio_dev->available_scan_masks)
+ compound_mask = kcalloc(BITS_TO_LONGS(indio_dev->masklength),
+ sizeof(long), GFP_KERNEL);
+ if (compound_mask == NULL) {
+ if (indio_dev->available_scan_masks == NULL)
+ kfree(old_mask);
+ return -ENOMEM;
+ }
+ indio_dev->scan_timestamp = 0;
+
+ list_for_each_entry(buffer, &indio_dev->buffer_list, buffer_list) {
+ bitmap_or(compound_mask, compound_mask, buffer->scan_mask,
+ indio_dev->masklength);
+ indio_dev->scan_timestamp |= buffer->scan_timestamp;
+ }
+ if (indio_dev->available_scan_masks) {
indio_dev->active_scan_mask =
iio_scan_mask_match(indio_dev->available_scan_masks,
indio_dev->masklength,
- buffer->scan_mask);
- else
- indio_dev->active_scan_mask = buffer->scan_mask;
-
- if (indio_dev->active_scan_mask == NULL)
- return -EINVAL;
+ compound_mask);
+ if (indio_dev->active_scan_mask == NULL) {
+ /*
+ * Roll back.
+ * Note can only occur when adding a buffer.
+ */
+ list_del(&insert_buffer->buffer_list);
+ indio_dev->active_scan_mask = old_mask;
+ success = -EINVAL;
+ }
+ } else {
+ indio_dev->active_scan_mask = compound_mask;
+ }
iio_update_demux(indio_dev);
- if (indio_dev->info->update_scan_mode)
- return indio_dev->info
+ /* Wind up again */
+ if (indio_dev->setup_ops->preenable) {
+ ret = indio_dev->setup_ops->preenable(indio_dev);
+ if (ret) {
+ printk(KERN_ERR
+ "Buffer not started:"
+ "buffer preenable failed\n");
+ goto error_remove_inserted;
+ }
+ }
+ indio_dev->scan_bytes =
+ iio_compute_scan_bytes(indio_dev,
+ indio_dev->active_scan_mask,
+ indio_dev->scan_timestamp);
+ list_for_each_entry(buffer, &indio_dev->buffer_list, buffer_list)
+ if (buffer->access->request_update) {
+ ret = buffer->access->request_update(buffer);
+ if (ret) {
+ printk(KERN_INFO
+ "Buffer not started:"
+ "buffer parameter update failed\n");
+ goto error_run_postdisable;
+ }
+ }
+ if (indio_dev->info->update_scan_mode) {
+ ret = indio_dev->info
->update_scan_mode(indio_dev,
indio_dev->active_scan_mask);
+ if (ret < 0) {
+ printk(KERN_INFO "update scan mode failed\n");
+ goto error_run_postdisable;
+ }
+ }
+ /* Definitely possible for devices to support both of these.*/
+ if (indio_dev->modes & INDIO_BUFFER_TRIGGERED) {
+ if (!indio_dev->trig) {
+ printk(KERN_INFO "Buffer not started: no trigger\n");
+ ret = -EINVAL;
+ /* Can only occur on first buffer */
+ goto error_run_postdisable;
+ }
+ indio_dev->currentmode = INDIO_BUFFER_TRIGGERED;
+ } else if (indio_dev->modes & INDIO_BUFFER_HARDWARE) {
+ indio_dev->currentmode = INDIO_BUFFER_HARDWARE;
+ } else { /* should never be reached */
+ ret = -EINVAL;
+ goto error_run_postdisable;
+ }
+
+ if (indio_dev->setup_ops->postenable) {
+ ret = indio_dev->setup_ops->postenable(indio_dev);
+ if (ret) {
+ printk(KERN_INFO
+ "Buffer not started: postenable failed\n");
+ indio_dev->currentmode = INDIO_DIRECT_MODE;
+ if (indio_dev->setup_ops->postdisable)
+ indio_dev->setup_ops->postdisable(indio_dev);
+ goto error_disable_all_buffers;
+ }
+ }
+
+ if (indio_dev->available_scan_masks)
+ kfree(compound_mask);
+ else
+ kfree(old_mask);
+
+ return success;
+
+error_disable_all_buffers:
+ indio_dev->currentmode = INDIO_DIRECT_MODE;
+error_run_postdisable:
+ if (indio_dev->setup_ops->postdisable)
+ indio_dev->setup_ops->postdisable(indio_dev);
+error_remove_inserted:
+
+ if (insert_buffer)
+ list_del(&insert_buffer->buffer_list);
+ indio_dev->active_scan_mask = old_mask;
+ kfree(compound_mask);
+error_ret:
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(iio_update_buffers);
+
+ssize_t iio_buffer_store_enable(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t len)
+{
+ int ret;
+ bool requested_state;
+ struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+ struct iio_buffer *pbuf = indio_dev->buffer;
+ bool inlist;
+
+ ret = strtobool(buf, &requested_state);
+ if (ret < 0)
+ return ret;
+
+ mutex_lock(&indio_dev->mlock);
+
+ /* Find out if it is in the list */
+ inlist = iio_buffer_is_active(indio_dev, pbuf);
+ /* Already in desired state */
+ if (inlist == requested_state)
+ goto done;
+
+ if (requested_state)
+ ret = iio_update_buffers(indio_dev,
+ indio_dev->buffer, NULL);
+ else
+ ret = iio_update_buffers(indio_dev,
+ NULL, indio_dev->buffer);
+
+ if (ret < 0)
+ goto done;
+done:
+ mutex_unlock(&indio_dev->mlock);
+ return (ret < 0) ? ret : len;
+}
+EXPORT_SYMBOL(iio_buffer_store_enable);
+
+int iio_sw_buffer_preenable(struct iio_dev *indio_dev)
+{
+ struct iio_buffer *buffer;
+ unsigned bytes;
+ dev_dbg(&indio_dev->dev, "%s\n", __func__);
+
+ list_for_each_entry(buffer, &indio_dev->buffer_list, buffer_list)
+ if (buffer->access->set_bytes_per_datum) {
+ bytes = iio_compute_scan_bytes(indio_dev,
+ buffer->scan_mask,
+ buffer->scan_timestamp);
+
+ buffer->access->set_bytes_per_datum(buffer, bytes);
+ }
return 0;
}
EXPORT_SYMBOL(iio_sw_buffer_preenable);
@@ -599,7 +707,11 @@
* iio_scan_mask_set() - set particular bit in the scan mask
* @buffer: the buffer whose scan mask we are interested in
* @bit: the bit to be set.
- **/
+ *
+ * Note that at this point we have no way of knowing what other
+ * buffers might request, hence this code only verifies that the
+ * individual buffers request is plausible.
+ */
int iio_scan_mask_set(struct iio_dev *indio_dev,
struct iio_buffer *buffer, int bit)
{
@@ -682,13 +794,12 @@
return buffer->demux_bounce;
}
-int iio_push_to_buffer(struct iio_buffer *buffer, unsigned char *data)
+static int iio_push_to_buffer(struct iio_buffer *buffer, unsigned char *data)
{
unsigned char *dataout = iio_demux(buffer, data);
return buffer->access->store_to(buffer, dataout);
}
-EXPORT_SYMBOL_GPL(iio_push_to_buffer);
static void iio_buffer_demux_free(struct iio_buffer *buffer)
{
@@ -699,10 +810,26 @@
}
}
-int iio_update_demux(struct iio_dev *indio_dev)
+
+int iio_push_to_buffers(struct iio_dev *indio_dev, unsigned char *data)
+{
+ int ret;
+ struct iio_buffer *buf;
+
+ list_for_each_entry(buf, &indio_dev->buffer_list, buffer_list) {
+ ret = iio_push_to_buffer(buf, data);
+ if (ret < 0)
+ return ret;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(iio_push_to_buffers);
+
+static int iio_buffer_update_demux(struct iio_dev *indio_dev,
+ struct iio_buffer *buffer)
{
const struct iio_chan_spec *ch;
- struct iio_buffer *buffer = indio_dev->buffer;
int ret, in_ind = -1, out_ind, length;
unsigned in_loc = 0, out_loc = 0;
struct iio_demux_table *p;
@@ -787,4 +914,23 @@
return ret;
}
+
+int iio_update_demux(struct iio_dev *indio_dev)
+{
+ struct iio_buffer *buffer;
+ int ret;
+
+ list_for_each_entry(buffer, &indio_dev->buffer_list, buffer_list) {
+ ret = iio_buffer_update_demux(indio_dev, buffer);
+ if (ret < 0)
+ goto error_clear_mux_table;
+ }
+ return 0;
+
+error_clear_mux_table:
+ list_for_each_entry(buffer, &indio_dev->buffer_list, buffer_list)
+ iio_buffer_demux_free(buffer);
+
+ return ret;
+}
EXPORT_SYMBOL_GPL(iio_update_demux);
diff --git a/drivers/iio/industrialio-core.c b/drivers/iio/industrialio-core.c
index 6eb24db..8848f16 100644
--- a/drivers/iio/industrialio-core.c
+++ b/drivers/iio/industrialio-core.c
@@ -65,6 +65,7 @@
[IIO_CAPACITANCE] = "capacitance",
[IIO_ALTVOLTAGE] = "altvoltage",
[IIO_CCT] = "cct",
+ [IIO_PRESSURE] = "pressure",
};
static const char * const iio_modifier_names[] = {
@@ -397,11 +398,74 @@
val2 = do_div(tmp, 1000000000LL);
val = tmp;
return sprintf(buf, "%d.%09u\n", val, val2);
+ case IIO_VAL_FRACTIONAL_LOG2:
+ tmp = (s64)val * 1000000000LL >> val2;
+ val2 = do_div(tmp, 1000000000LL);
+ val = tmp;
+ return sprintf(buf, "%d.%09u\n", val, val2);
default:
return 0;
}
}
+/**
+ * iio_str_to_fixpoint() - Parse a fixed-point number from a string
+ * @str: The string to parse
+ * @fract_mult: Multiplier for the first decimal place, should be a power of 10
+ * @integer: The integer part of the number
+ * @fract: The fractional part of the number
+ *
+ * Returns 0 on success, or a negative error code if the string could not be
+ * parsed.
+ */
+int iio_str_to_fixpoint(const char *str, int fract_mult,
+ int *integer, int *fract)
+{
+ int i = 0, f = 0;
+ bool integer_part = true, negative = false;
+
+ if (str[0] == '-') {
+ negative = true;
+ str++;
+ } else if (str[0] == '+') {
+ str++;
+ }
+
+ while (*str) {
+ if ('0' <= *str && *str <= '9') {
+ if (integer_part) {
+ i = i * 10 + *str - '0';
+ } else {
+ f += fract_mult * (*str - '0');
+ fract_mult /= 10;
+ }
+ } else if (*str == '\n') {
+ if (*(str + 1) == '\0')
+ break;
+ else
+ return -EINVAL;
+ } else if (*str == '.' && integer_part) {
+ integer_part = false;
+ } else {
+ return -EINVAL;
+ }
+ str++;
+ }
+
+ if (negative) {
+ if (i)
+ i = -i;
+ else
+ f = -f;
+ }
+
+ *integer = i;
+ *fract = f;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(iio_str_to_fixpoint);
+
static ssize_t iio_write_channel_info(struct device *dev,
struct device_attribute *attr,
const char *buf,
@@ -409,8 +473,8 @@
{
struct iio_dev *indio_dev = dev_to_iio_dev(dev);
struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
- int ret, integer = 0, fract = 0, fract_mult = 100000;
- bool integer_part = true, negative = false;
+ int ret, fract_mult = 100000;
+ int integer, fract;
/* Assumes decimal - precision based on number of digits */
if (!indio_dev->info->write_raw)
@@ -429,39 +493,9 @@
return -EINVAL;
}
- if (buf[0] == '-') {
- negative = true;
- buf++;
- }
-
- while (*buf) {
- if ('0' <= *buf && *buf <= '9') {
- if (integer_part)
- integer = integer*10 + *buf - '0';
- else {
- fract += fract_mult*(*buf - '0');
- if (fract_mult == 1)
- break;
- fract_mult /= 10;
- }
- } else if (*buf == '\n') {
- if (*(buf + 1) == '\0')
- break;
- else
- return -EINVAL;
- } else if (*buf == '.') {
- integer_part = false;
- } else {
- return -EINVAL;
- }
- buf++;
- }
- if (negative) {
- if (integer)
- integer = -integer;
- else
- fract = -fract;
- }
+ ret = iio_str_to_fixpoint(buf, fract_mult, &integer, &fract);
+ if (ret)
+ return ret;
ret = indio_dev->info->write_raw(indio_dev, this_attr->c,
integer, fract, this_attr->address);
@@ -851,6 +885,7 @@
return NULL;
}
dev_set_name(&dev->dev, "iio:device%d", dev->id);
+ INIT_LIST_HEAD(&dev->buffer_list);
}
return dev;
diff --git a/drivers/iio/industrialio-event.c b/drivers/iio/industrialio-event.c
index fa6543b..261cae0 100644
--- a/drivers/iio/industrialio-event.c
+++ b/drivers/iio/industrialio-event.c
@@ -239,13 +239,13 @@
{
struct iio_dev *indio_dev = dev_to_iio_dev(dev);
struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
- unsigned long val;
+ int val;
int ret;
if (!indio_dev->info->write_event_value)
return -EINVAL;
- ret = strict_strtoul(buf, 10, &val);
+ ret = kstrtoint(buf, 10, &val);
if (ret)
return ret;
@@ -350,15 +350,10 @@
ret = iio_device_add_event_sysfs(indio_dev,
&indio_dev->channels[j]);
if (ret < 0)
- goto error_clear_attrs;
+ return ret;
attrcount += ret;
}
return attrcount;
-
-error_clear_attrs:
- __iio_remove_event_config_attrs(indio_dev);
-
- return ret;
}
static bool iio_check_for_dynamic_events(struct iio_dev *indio_dev)
diff --git a/drivers/iio/inkern.c b/drivers/iio/inkern.c
index f2b78d4..d55e98f 100644
--- a/drivers/iio/inkern.c
+++ b/drivers/iio/inkern.c
@@ -78,7 +78,7 @@
found_it = true;
break;
}
- if (found_it == false) {
+ if (!found_it) {
ret = -ENODEV;
goto error_ret;
}
@@ -203,6 +203,7 @@
if (name && strcmp(name, c->map->consumer_dev_name) != 0)
continue;
chans[mapind].indio_dev = c->indio_dev;
+ chans[mapind].data = c->map->consumer_data;
chans[mapind].channel =
iio_chan_spec_from_name(chans[mapind].indio_dev,
c->map->adc_channel_label);
@@ -314,6 +315,9 @@
*processed = div_s64(raw64 * (s64)scale_val * scale,
scale_val2);
break;
+ case IIO_VAL_FRACTIONAL_LOG2:
+ *processed = (raw64 * (s64)scale_val * scale) >> scale_val2;
+ break;
default:
return -EINVAL;
}
diff --git a/drivers/iio/light/adjd_s311.c b/drivers/iio/light/adjd_s311.c
index 164b62b..36d210a 100644
--- a/drivers/iio/light/adjd_s311.c
+++ b/drivers/iio/light/adjd_s311.c
@@ -164,7 +164,6 @@
struct iio_poll_func *pf = p;
struct iio_dev *indio_dev = pf->indio_dev;
struct adjd_s311_data *data = iio_priv(indio_dev);
- struct iio_buffer *buffer = indio_dev->buffer;
s64 time_ns = iio_get_time_ns();
int len = 0;
int i, j = 0;
@@ -187,7 +186,7 @@
if (indio_dev->scan_timestamp)
*(s64 *)((u8 *)data->buffer + ALIGN(len, sizeof(s64)))
= time_ns;
- iio_push_to_buffer(buffer, (u8 *)data->buffer);
+ iio_push_to_buffers(indio_dev, (u8 *)data->buffer);
done:
iio_trigger_notify_done(indio_dev->trig);
diff --git a/drivers/iio/light/hid-sensor-als.c b/drivers/iio/light/hid-sensor-als.c
index 96e3691..23eeeef 100644
--- a/drivers/iio/light/hid-sensor-als.c
+++ b/drivers/iio/light/hid-sensor-als.c
@@ -176,21 +176,8 @@
/* Function to push data to buffer */
static void hid_sensor_push_data(struct iio_dev *indio_dev, u8 *data, int len)
{
- struct iio_buffer *buffer = indio_dev->buffer;
- int datum_sz;
-
dev_dbg(&indio_dev->dev, "hid_sensor_push_data\n");
- if (!buffer) {
- dev_err(&indio_dev->dev, "Buffer == NULL\n");
- return;
- }
- datum_sz = buffer->access->get_bytes_per_datum(buffer);
- if (len > datum_sz) {
- dev_err(&indio_dev->dev, "Datum size mismatch %d:%d\n", len,
- datum_sz);
- return;
- }
- iio_push_to_buffer(buffer, (u8 *)data);
+ iio_push_to_buffers(indio_dev, (u8 *)data);
}
/* Callback handler to send event after all samples are received and captured */
@@ -285,10 +272,9 @@
goto error_free_dev;
}
- channels = kmemdup(als_channels,
- sizeof(als_channels),
- GFP_KERNEL);
+ channels = kmemdup(als_channels, sizeof(als_channels), GFP_KERNEL);
if (!channels) {
+ ret = -ENOMEM;
dev_err(&pdev->dev, "failed to duplicate channels\n");
goto error_free_dev;
}
diff --git a/drivers/iio/magnetometer/hid-sensor-magn-3d.c b/drivers/iio/magnetometer/hid-sensor-magn-3d.c
index c4f0d27..8e75eb7 100644
--- a/drivers/iio/magnetometer/hid-sensor-magn-3d.c
+++ b/drivers/iio/magnetometer/hid-sensor-magn-3d.c
@@ -198,21 +198,8 @@
/* Function to push data to buffer */
static void hid_sensor_push_data(struct iio_dev *indio_dev, u8 *data, int len)
{
- struct iio_buffer *buffer = indio_dev->buffer;
- int datum_sz;
-
dev_dbg(&indio_dev->dev, "hid_sensor_push_data\n");
- if (!buffer) {
- dev_err(&indio_dev->dev, "Buffer == NULL\n");
- return;
- }
- datum_sz = buffer->access->get_bytes_per_datum(buffer);
- if (len > datum_sz) {
- dev_err(&indio_dev->dev, "Datum size mismatch %d:%d\n", len,
- datum_sz);
- return;
- }
- iio_push_to_buffer(buffer, (u8 *)data);
+ iio_push_to_buffers(indio_dev, (u8 *)data);
}
/* Callback handler to send event after all samples are received and captured */
@@ -320,10 +307,10 @@
goto error_free_dev;
}
- channels = kmemdup(magn_3d_channels,
- sizeof(magn_3d_channels),
- GFP_KERNEL);
+ channels = kmemdup(magn_3d_channels, sizeof(magn_3d_channels),
+ GFP_KERNEL);
if (!channels) {
+ ret = -ENOMEM;
dev_err(&pdev->dev, "failed to duplicate channels\n");
goto error_free_dev;
}
diff --git a/drivers/ipack/Kconfig b/drivers/ipack/Kconfig
new file mode 100644
index 0000000..3949e55
--- /dev/null
+++ b/drivers/ipack/Kconfig
@@ -0,0 +1,24 @@
+#
+# IPACK configuration.
+#
+
+menuconfig IPACK_BUS
+ tristate "IndustryPack bus support"
+ depends on HAS_IOMEM
+ ---help---
+ This option provides support for the IndustryPack framework. There
+ are IndustryPack carrier boards, which interface another bus (such as
+ PCI) to an IndustryPack bus, and IndustryPack modules, that are
+ hosted on these buses. While IndustryPack modules can provide a
+ large variety of functionality, they are most often found in
+ industrial control applications.
+
+ Say N if unsure.
+
+if IPACK_BUS
+
+source "drivers/ipack/carriers/Kconfig"
+
+source "drivers/ipack/devices/Kconfig"
+
+endif # IPACK
diff --git a/drivers/staging/ipack/Makefile b/drivers/ipack/Makefile
similarity index 83%
rename from drivers/staging/ipack/Makefile
rename to drivers/ipack/Makefile
index 85ff223..6f14ade 100644
--- a/drivers/staging/ipack/Makefile
+++ b/drivers/ipack/Makefile
@@ -3,4 +3,4 @@
#
obj-$(CONFIG_IPACK_BUS) += ipack.o
obj-y += devices/
-obj-y += bridges/
+obj-y += carriers/
diff --git a/drivers/ipack/carriers/Kconfig b/drivers/ipack/carriers/Kconfig
new file mode 100644
index 0000000..922ff5c
--- /dev/null
+++ b/drivers/ipack/carriers/Kconfig
@@ -0,0 +1,7 @@
+config BOARD_TPCI200
+ tristate "Support for the TEWS TPCI-200 IndustryPack carrier board"
+ depends on IPACK_BUS
+ depends on PCI
+ help
+ This driver adds support for the TEWS TPCI200 IndustryPack carrier board.
+ default n
diff --git a/drivers/staging/ipack/bridges/Makefile b/drivers/ipack/carriers/Makefile
similarity index 100%
rename from drivers/staging/ipack/bridges/Makefile
rename to drivers/ipack/carriers/Makefile
diff --git a/drivers/staging/ipack/bridges/tpci200.c b/drivers/ipack/carriers/tpci200.c
similarity index 66%
rename from drivers/staging/ipack/bridges/tpci200.c
rename to drivers/ipack/carriers/tpci200.c
index 46d6657..0246b1f 100644
--- a/drivers/staging/ipack/bridges/tpci200.c
+++ b/drivers/ipack/carriers/tpci200.c
@@ -2,9 +2,10 @@
* tpci200.c
*
* driver for the TEWS TPCI-200 device
- * Copyright (c) 2009 Nicolas Serafini, EIC2 SA
- * Copyright (c) 2010,2011 Samuel Iglesias Gonsalvez <siglesia@cern.ch>, CERN
- * Copyright (c) 2012 Samuel Iglesias Gonsalvez <siglesias@igalia.com>, Igalia
+ *
+ * Copyright (C) 2009-2012 CERN (www.cern.ch)
+ * Author: Nicolas Serafini, EIC2 SA
+ * Author: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
@@ -15,20 +16,36 @@
#include <linux/slab.h>
#include "tpci200.h"
-static u16 tpci200_status_timeout[] = {
+static const u16 tpci200_status_timeout[] = {
TPCI200_A_TIMEOUT,
TPCI200_B_TIMEOUT,
TPCI200_C_TIMEOUT,
TPCI200_D_TIMEOUT,
};
-static u16 tpci200_status_error[] = {
+static const u16 tpci200_status_error[] = {
TPCI200_A_ERROR,
TPCI200_B_ERROR,
TPCI200_C_ERROR,
TPCI200_D_ERROR,
};
+static const size_t tpci200_space_size[IPACK_SPACE_COUNT] = {
+ [IPACK_IO_SPACE] = TPCI200_IO_SPACE_SIZE,
+ [IPACK_ID_SPACE] = TPCI200_ID_SPACE_SIZE,
+ [IPACK_INT_SPACE] = TPCI200_INT_SPACE_SIZE,
+ [IPACK_MEM8_SPACE] = TPCI200_MEM8_SPACE_SIZE,
+ [IPACK_MEM16_SPACE] = TPCI200_MEM16_SPACE_SIZE,
+};
+
+static const size_t tpci200_space_interval[IPACK_SPACE_COUNT] = {
+ [IPACK_IO_SPACE] = TPCI200_IO_SPACE_INTERVAL,
+ [IPACK_ID_SPACE] = TPCI200_ID_SPACE_INTERVAL,
+ [IPACK_INT_SPACE] = TPCI200_INT_SPACE_INTERVAL,
+ [IPACK_MEM8_SPACE] = TPCI200_MEM8_SPACE_INTERVAL,
+ [IPACK_MEM16_SPACE] = TPCI200_MEM16_SPACE_INTERVAL,
+};
+
static struct tpci200_board *check_slot(struct ipack_device *dev)
{
struct tpci200_board *tpci200;
@@ -47,7 +64,7 @@
if (dev->slot >= TPCI200_NB_SLOT) {
dev_info(&dev->dev,
"Slot [%d:%d] doesn't exist! Last tpci200 slot is %d.\n",
- dev->bus_nr, dev->slot, TPCI200_NB_SLOT-1);
+ dev->bus->bus_nr, dev->slot, TPCI200_NB_SLOT-1);
return NULL;
}
@@ -74,33 +91,19 @@
static void tpci200_unregister(struct tpci200_board *tpci200)
{
- int i;
-
free_irq(tpci200->info->pdev->irq, (void *) tpci200);
pci_iounmap(tpci200->info->pdev, tpci200->info->interface_regs);
- pci_iounmap(tpci200->info->pdev, tpci200->info->ioidint_space);
- pci_iounmap(tpci200->info->pdev, tpci200->info->mem8_space);
pci_iounmap(tpci200->info->pdev, tpci200->info->cfg_regs);
pci_release_region(tpci200->info->pdev, TPCI200_IP_INTERFACE_BAR);
pci_release_region(tpci200->info->pdev, TPCI200_IO_ID_INT_SPACES_BAR);
+ pci_release_region(tpci200->info->pdev, TPCI200_MEM16_SPACE_BAR);
pci_release_region(tpci200->info->pdev, TPCI200_MEM8_SPACE_BAR);
pci_release_region(tpci200->info->pdev, TPCI200_CFG_MEM_BAR);
pci_disable_device(tpci200->info->pdev);
pci_dev_put(tpci200->info->pdev);
-
- for (i = 0; i < TPCI200_NB_SLOT; i++) {
- tpci200->slots[i].io_phys.address = NULL;
- tpci200->slots[i].io_phys.size = 0;
- tpci200->slots[i].id_phys.address = NULL;
- tpci200->slots[i].id_phys.size = 0;
- tpci200->slots[i].int_phys.address = NULL;
- tpci200->slots[i].int_phys.size = 0;
- tpci200->slots[i].mem_phys.address = NULL;
- tpci200->slots[i].mem_phys.size = 0;
- }
}
static void tpci200_enable_irq(struct tpci200_board *tpci200,
@@ -207,7 +210,8 @@
if (tpci200->slots[dev->slot].irq != NULL) {
dev_err(&dev->dev,
- "Slot [%d:%d] IRQ already registered !\n", dev->bus_nr,
+ "Slot [%d:%d] IRQ already registered !\n",
+ dev->bus->bus_nr,
dev->slot);
res = -EINVAL;
goto out_unlock;
@@ -217,7 +221,7 @@
if (slot_irq == NULL) {
dev_err(&dev->dev,
"Slot [%d:%d] unable to allocate memory for IRQ !\n",
- dev->bus_nr, dev->slot);
+ dev->bus->bus_nr, dev->slot);
res = -ENOMEM;
goto out_unlock;
}
@@ -244,8 +248,7 @@
{
int i;
int res;
- unsigned long ioidint_base;
- unsigned long mem_base;
+ phys_addr_t ioidint_base;
unsigned short slot_ctrl;
if (pci_enable_device(tpci200->info->pdev) < 0)
@@ -274,15 +277,26 @@
goto out_release_ip_space;
}
- /* Request MEM space (Bar 4) */
+ /* Request MEM8 space (Bar 5) */
res = pci_request_region(tpci200->info->pdev, TPCI200_MEM8_SPACE_BAR,
- "Carrier MEM space");
+ "Carrier MEM8 space");
+ if (res) {
+ dev_err(&tpci200->info->pdev->dev,
+ "(bn 0x%X, sn 0x%X) failed to allocate PCI resource for BAR 5!",
+ tpci200->info->pdev->bus->number,
+ tpci200->info->pdev->devfn);
+ goto out_release_ioid_int_space;
+ }
+
+ /* Request MEM16 space (Bar 4) */
+ res = pci_request_region(tpci200->info->pdev, TPCI200_MEM16_SPACE_BAR,
+ "Carrier MEM16 space");
if (res) {
dev_err(&tpci200->info->pdev->dev,
"(bn 0x%X, sn 0x%X) failed to allocate PCI resource for BAR 4!",
tpci200->info->pdev->bus->number,
tpci200->info->pdev->devfn);
- goto out_release_ioid_int_space;
+ goto out_release_mem8_space;
}
/* Map internal tpci200 driver user space */
@@ -290,22 +304,22 @@
ioremap_nocache(pci_resource_start(tpci200->info->pdev,
TPCI200_IP_INTERFACE_BAR),
TPCI200_IFACE_SIZE);
- tpci200->info->ioidint_space =
- ioremap_nocache(pci_resource_start(tpci200->info->pdev,
- TPCI200_IO_ID_INT_SPACES_BAR),
- TPCI200_IOIDINT_SIZE);
- tpci200->info->mem8_space =
- ioremap_nocache(pci_resource_start(tpci200->info->pdev,
- TPCI200_MEM8_SPACE_BAR),
- TPCI200_MEM8_SIZE);
/* Initialize lock that protects interface_regs */
spin_lock_init(&tpci200->regs_lock);
ioidint_base = pci_resource_start(tpci200->info->pdev,
TPCI200_IO_ID_INT_SPACES_BAR);
- mem_base = pci_resource_start(tpci200->info->pdev,
- TPCI200_MEM8_SPACE_BAR);
+ tpci200->mod_mem[IPACK_IO_SPACE] = ioidint_base + TPCI200_IO_SPACE_OFF;
+ tpci200->mod_mem[IPACK_ID_SPACE] = ioidint_base + TPCI200_ID_SPACE_OFF;
+ tpci200->mod_mem[IPACK_INT_SPACE] =
+ ioidint_base + TPCI200_INT_SPACE_OFF;
+ tpci200->mod_mem[IPACK_MEM8_SPACE] =
+ pci_resource_start(tpci200->info->pdev,
+ TPCI200_MEM8_SPACE_BAR);
+ tpci200->mod_mem[IPACK_MEM16_SPACE] =
+ pci_resource_start(tpci200->info->pdev,
+ TPCI200_MEM16_SPACE_BAR);
/* Set the default parameters of the slot
* INT0 disabled, level sensitive
@@ -316,30 +330,8 @@
* clock rate 8 MHz
*/
slot_ctrl = 0;
-
- /* Set all slot physical address space */
- for (i = 0; i < TPCI200_NB_SLOT; i++) {
- tpci200->slots[i].io_phys.address =
- (void __iomem *)ioidint_base +
- TPCI200_IO_SPACE_OFF + TPCI200_IO_SPACE_GAP*i;
- tpci200->slots[i].io_phys.size = TPCI200_IO_SPACE_SIZE;
-
- tpci200->slots[i].id_phys.address =
- (void __iomem *)ioidint_base +
- TPCI200_ID_SPACE_OFF + TPCI200_ID_SPACE_GAP*i;
- tpci200->slots[i].id_phys.size = TPCI200_ID_SPACE_SIZE;
-
- tpci200->slots[i].int_phys.address =
- (void __iomem *)ioidint_base +
- TPCI200_INT_SPACE_OFF + TPCI200_INT_SPACE_GAP * i;
- tpci200->slots[i].int_phys.size = TPCI200_INT_SPACE_SIZE;
-
- tpci200->slots[i].mem_phys.address =
- (void __iomem *)mem_base + TPCI200_MEM8_GAP*i;
- tpci200->slots[i].mem_phys.size = TPCI200_MEM8_SIZE;
-
+ for (i = 0; i < TPCI200_NB_SLOT; i++)
writew(slot_ctrl, &tpci200->info->interface_regs->control[i]);
- }
res = request_irq(tpci200->info->pdev->irq,
tpci200_interrupt, IRQF_SHARED,
@@ -354,6 +346,8 @@
return 0;
+out_release_mem8_space:
+ pci_release_region(tpci200->info->pdev, TPCI200_MEM8_SPACE_BAR);
out_release_ioid_int_space:
pci_release_region(tpci200->info->pdev, TPCI200_IO_ID_INT_SPACES_BAR);
out_release_ip_space:
@@ -363,166 +357,6 @@
return res;
}
-static int tpci200_slot_unmap_space(struct ipack_device *dev, int space)
-{
- struct ipack_addr_space *virt_addr_space;
- struct tpci200_board *tpci200;
-
- tpci200 = check_slot(dev);
- if (tpci200 == NULL)
- return -EINVAL;
-
- if (mutex_lock_interruptible(&tpci200->mutex))
- return -ERESTARTSYS;
-
- switch (space) {
- case IPACK_IO_SPACE:
- if (dev->io_space.address == NULL) {
- dev_info(&dev->dev,
- "Slot [%d:%d] IO space not mapped !\n",
- dev->bus_nr, dev->slot);
- goto out_unlock;
- }
- virt_addr_space = &dev->io_space;
- break;
- case IPACK_ID_SPACE:
- if (dev->id_space.address == NULL) {
- dev_info(&dev->dev,
- "Slot [%d:%d] ID space not mapped !\n",
- dev->bus_nr, dev->slot);
- goto out_unlock;
- }
- virt_addr_space = &dev->id_space;
- break;
- case IPACK_INT_SPACE:
- if (dev->int_space.address == NULL) {
- dev_info(&dev->dev,
- "Slot [%d:%d] INT space not mapped !\n",
- dev->bus_nr, dev->slot);
- goto out_unlock;
- }
- virt_addr_space = &dev->int_space;
- break;
- case IPACK_MEM_SPACE:
- if (dev->mem_space.address == NULL) {
- dev_info(&dev->dev,
- "Slot [%d:%d] MEM space not mapped !\n",
- dev->bus_nr, dev->slot);
- goto out_unlock;
- }
- virt_addr_space = &dev->mem_space;
- break;
- default:
- dev_err(&dev->dev,
- "Slot [%d:%d] space number %d doesn't exist !\n",
- dev->bus_nr, dev->slot, space);
- mutex_unlock(&tpci200->mutex);
- return -EINVAL;
- }
-
- iounmap(virt_addr_space->address);
-
- virt_addr_space->address = NULL;
- virt_addr_space->size = 0;
-out_unlock:
- mutex_unlock(&tpci200->mutex);
- return 0;
-}
-
-static int tpci200_slot_map_space(struct ipack_device *dev,
- unsigned int memory_size, int space)
-{
- int res = 0;
- unsigned int size_to_map;
- void __iomem *phys_address;
- struct ipack_addr_space *virt_addr_space;
- struct tpci200_board *tpci200;
-
- tpci200 = check_slot(dev);
- if (tpci200 == NULL)
- return -EINVAL;
-
- if (mutex_lock_interruptible(&tpci200->mutex))
- return -ERESTARTSYS;
-
- switch (space) {
- case IPACK_IO_SPACE:
- if (dev->io_space.address != NULL) {
- dev_err(&dev->dev,
- "Slot [%d:%d] IO space already mapped !\n",
- tpci200->number, dev->slot);
- res = -EINVAL;
- goto out_unlock;
- }
- virt_addr_space = &dev->io_space;
-
- phys_address = tpci200->slots[dev->slot].io_phys.address;
- size_to_map = tpci200->slots[dev->slot].io_phys.size;
- break;
- case IPACK_ID_SPACE:
- if (dev->id_space.address != NULL) {
- dev_err(&dev->dev,
- "Slot [%d:%d] ID space already mapped !\n",
- tpci200->number, dev->slot);
- res = -EINVAL;
- goto out_unlock;
- }
- virt_addr_space = &dev->id_space;
-
- phys_address = tpci200->slots[dev->slot].id_phys.address;
- size_to_map = tpci200->slots[dev->slot].id_phys.size;
- break;
- case IPACK_INT_SPACE:
- if (dev->int_space.address != NULL) {
- dev_err(&dev->dev,
- "Slot [%d:%d] INT space already mapped !\n",
- tpci200->number, dev->slot);
- res = -EINVAL;
- goto out_unlock;
- }
- virt_addr_space = &dev->int_space;
-
- phys_address = tpci200->slots[dev->slot].int_phys.address;
- size_to_map = tpci200->slots[dev->slot].int_phys.size;
- break;
- case IPACK_MEM_SPACE:
- if (dev->mem_space.address != NULL) {
- dev_err(&dev->dev,
- "Slot [%d:%d] MEM space already mapped !\n",
- tpci200->number, dev->slot);
- res = -EINVAL;
- goto out_unlock;
- }
- virt_addr_space = &dev->mem_space;
-
- if (memory_size > tpci200->slots[dev->slot].mem_phys.size) {
- dev_err(&dev->dev,
- "Slot [%d:%d] request is 0x%X memory, only 0x%X available !\n",
- dev->bus_nr, dev->slot, memory_size,
- tpci200->slots[dev->slot].mem_phys.size);
- res = -EINVAL;
- goto out_unlock;
- }
-
- phys_address = tpci200->slots[dev->slot].mem_phys.address;
- size_to_map = memory_size;
- break;
- default:
- dev_err(&dev->dev, "Slot [%d:%d] space %d doesn't exist !\n",
- tpci200->number, dev->slot, space);
- res = -EINVAL;
- goto out_unlock;
- }
-
- virt_addr_space->size = size_to_map;
- virt_addr_space->address =
- ioremap_nocache((unsigned long)phys_address, size_to_map);
-
-out_unlock:
- mutex_unlock(&tpci200->mutex);
- return res;
-}
-
static int tpci200_get_clockrate(struct ipack_device *dev)
{
struct tpci200_board *tpci200 = check_slot(dev);
@@ -610,8 +444,6 @@
}
static const struct ipack_bus_ops tpci200_bus_ops = {
- .map_space = tpci200_slot_map_space,
- .unmap_space = tpci200_slot_unmap_space,
.request_irq = tpci200_request_irq,
.free_irq = tpci200_free_irq,
.get_clockrate = tpci200_get_clockrate,
@@ -641,6 +473,31 @@
return 0;
}
+static void tpci200_release_device(struct ipack_device *dev)
+{
+ kfree(dev);
+}
+
+static int tpci200_create_device(struct tpci200_board *tpci200, int i)
+{
+ enum ipack_space space;
+ struct ipack_device *dev =
+ kzalloc(sizeof(struct ipack_device), GFP_KERNEL);
+ if (!dev)
+ return -ENOMEM;
+ dev->slot = i;
+ dev->bus = tpci200->info->ipack_bus;
+ dev->release = tpci200_release_device;
+
+ for (space = 0; space < IPACK_SPACE_COUNT; space++) {
+ dev->region[space].start =
+ tpci200->mod_mem[space]
+ + tpci200_space_interval[space] * i;
+ dev->region[space].size = tpci200_space_size[space];
+ }
+ return ipack_device_register(dev);
+}
+
static int tpci200_pci_probe(struct pci_dev *pdev,
const struct pci_device_id *id)
{
@@ -716,7 +573,7 @@
dev_set_drvdata(&pdev->dev, tpci200);
for (i = 0; i < TPCI200_NB_SLOT; i++)
- ipack_device_register(tpci200->info->ipack_bus, i);
+ tpci200_create_device(tpci200, i);
return 0;
out_err_bus_register:
@@ -742,7 +599,7 @@
kfree(tpci200);
}
-static void __devexit tpci200_pci_remove(struct pci_dev *dev)
+static void tpci200_pci_remove(struct pci_dev *dev)
{
struct tpci200_board *tpci200 = pci_get_drvdata(dev);
@@ -761,20 +618,10 @@
.name = "tpci200",
.id_table = tpci200_idtable,
.probe = tpci200_pci_probe,
- .remove = __devexit_p(tpci200_pci_remove),
+ .remove = tpci200_pci_remove,
};
-static int __init tpci200_drvr_init_module(void)
-{
- return pci_register_driver(&tpci200_pci_drv);
-}
-
-static void __exit tpci200_drvr_exit_module(void)
-{
- pci_unregister_driver(&tpci200_pci_drv);
-}
+module_pci_driver(tpci200_pci_drv);
MODULE_DESCRIPTION("TEWS TPCI-200 device driver");
MODULE_LICENSE("GPL");
-module_init(tpci200_drvr_init_module);
-module_exit(tpci200_drvr_exit_module);
diff --git a/drivers/staging/ipack/bridges/tpci200.h b/drivers/ipack/carriers/tpci200.h
similarity index 84%
rename from drivers/staging/ipack/bridges/tpci200.h
rename to drivers/ipack/carriers/tpci200.h
index 235d1fe..a7a151d 100644
--- a/drivers/staging/ipack/bridges/tpci200.h
+++ b/drivers/ipack/carriers/tpci200.h
@@ -2,9 +2,10 @@
* tpci200.h
*
* driver for the carrier TEWS TPCI-200
- * Copyright (c) 2009 Nicolas Serafini, EIC2 SA
- * Copyright (c) 2010,2011 Samuel Iglesias Gonsalvez <siglesia@cern.ch>, CERN
- * Copyright (c) 2012 Samuel Iglesias Gonsalvez <siglesias@igalia.com>, Igalia
+ *
+ * Copyright (C) 2009-2012 CERN (www.cern.ch)
+ * Author: Nicolas Serafini, EIC2 SA
+ * Author: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
@@ -19,8 +20,7 @@
#include <linux/spinlock.h>
#include <linux/swab.h>
#include <linux/io.h>
-
-#include "../ipack.h"
+#include <linux/ipack.h>
#define TPCI200_NB_SLOT 0x4
#define TPCI200_NB_BAR 0x6
@@ -49,20 +49,20 @@
#define TPCI200_IFACE_SIZE 0x100
#define TPCI200_IO_SPACE_OFF 0x0000
-#define TPCI200_IO_SPACE_GAP 0x0100
+#define TPCI200_IO_SPACE_INTERVAL 0x0100
#define TPCI200_IO_SPACE_SIZE 0x0080
#define TPCI200_ID_SPACE_OFF 0x0080
-#define TPCI200_ID_SPACE_GAP 0x0100
+#define TPCI200_ID_SPACE_INTERVAL 0x0100
#define TPCI200_ID_SPACE_SIZE 0x0040
#define TPCI200_INT_SPACE_OFF 0x00C0
-#define TPCI200_INT_SPACE_GAP 0x0100
+#define TPCI200_INT_SPACE_INTERVAL 0x0100
#define TPCI200_INT_SPACE_SIZE 0x0040
#define TPCI200_IOIDINT_SIZE 0x0400
-#define TPCI200_MEM8_GAP 0x00400000
-#define TPCI200_MEM8_SIZE 0x00400000
-#define TPCI200_MEM16_GAP 0x00800000
-#define TPCI200_MEM16_SIZE 0x00800000
+#define TPCI200_MEM8_SPACE_INTERVAL 0x00400000
+#define TPCI200_MEM8_SPACE_SIZE 0x00400000
+#define TPCI200_MEM16_SPACE_INTERVAL 0x00800000
+#define TPCI200_MEM16_SPACE_SIZE 0x00800000
/* control field in tpci200_regs */
#define TPCI200_INT0_EN 0x0040
@@ -137,11 +137,7 @@
*
*/
struct tpci200_slot {
- struct slot_irq *irq;
- struct ipack_addr_space io_phys;
- struct ipack_addr_space id_phys;
- struct ipack_addr_space int_phys;
- struct ipack_addr_space mem_phys;
+ struct slot_irq *irq;
};
/**
@@ -156,8 +152,6 @@
struct pci_dev *pdev;
struct pci_device_id *id_table;
struct tpci200_regs __iomem *interface_regs;
- void __iomem *ioidint_space;
- void __iomem *mem8_space;
void __iomem *cfg_regs;
struct ipack_bus_device *ipack_bus;
};
@@ -167,6 +161,7 @@
spinlock_t regs_lock;
struct tpci200_slot *slots;
struct tpci200_infos *info;
+ phys_addr_t mod_mem[IPACK_SPACE_COUNT];
};
#endif /* _TPCI200_H_ */
diff --git a/drivers/staging/ipack/devices/Kconfig b/drivers/ipack/devices/Kconfig
similarity index 99%
rename from drivers/staging/ipack/devices/Kconfig
rename to drivers/ipack/devices/Kconfig
index 39f7188..0b82fdc 100644
--- a/drivers/staging/ipack/devices/Kconfig
+++ b/drivers/ipack/devices/Kconfig
@@ -4,4 +4,3 @@
help
This driver supports the IPOCTAL serial port device for the IndustryPack bus.
default n
-
diff --git a/drivers/staging/ipack/devices/Makefile b/drivers/ipack/devices/Makefile
similarity index 100%
rename from drivers/staging/ipack/devices/Makefile
rename to drivers/ipack/devices/Makefile
diff --git a/drivers/staging/ipack/devices/ipoctal.c b/drivers/ipack/devices/ipoctal.c
similarity index 86%
rename from drivers/staging/ipack/devices/ipoctal.c
rename to drivers/ipack/devices/ipoctal.c
index d751edf..576d53d 100644
--- a/drivers/staging/ipack/devices/ipoctal.c
+++ b/drivers/ipack/devices/ipoctal.c
@@ -2,9 +2,10 @@
* ipoctal.c
*
* driver for the GE IP-OCTAL boards
- * Copyright (c) 2009 Nicolas Serafini, EIC2 SA
- * Copyright (c) 2010,2011 Samuel Iglesias Gonsalvez <siglesia@cern.ch>, CERN
- * Copyright (c) 2012 Samuel Iglesias Gonsalvez <siglesias@igalia.com>, Igalia
+ *
+ * Copyright (C) 2009-2012 CERN (www.cern.ch)
+ * Author: Nicolas Serafini, EIC2 SA
+ * Author: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
@@ -21,7 +22,7 @@
#include <linux/slab.h>
#include <linux/atomic.h>
#include <linux/io.h>
-#include "../ipack.h"
+#include <linux/ipack.h>
#include "ipoctal.h"
#include "scc2698.h"
@@ -53,6 +54,8 @@
struct ipoctal_channel channel[NR_CHANNELS];
unsigned char write;
struct tty_driver *tty_drv;
+ u8 __iomem *mem8_space;
+ u8 __iomem *int_space;
};
static int ipoctal_port_activate(struct tty_port *port, struct tty_struct *tty)
@@ -252,35 +255,12 @@
ipoctal_irq_channel(&ipoctal->channel[i]);
/* Clear the IPack device interrupt */
- readw(ipoctal->dev->int_space.address + ACK_INT_REQ0);
- readw(ipoctal->dev->int_space.address + ACK_INT_REQ1);
+ readw(ipoctal->int_space + ACK_INT_REQ0);
+ readw(ipoctal->int_space + ACK_INT_REQ1);
return IRQ_HANDLED;
}
-static int ipoctal_check_model(struct ipack_device *dev, unsigned char *id)
-{
- unsigned char manufacturerID;
- unsigned char board_id;
-
-
- manufacturerID = ioread8(dev->id_space.address + IPACK_IDPROM_OFFSET_MANUFACTURER_ID);
- if (manufacturerID != IPACK1_VENDOR_ID_SBS)
- return -ENODEV;
- board_id = ioread8(dev->id_space.address + IPACK_IDPROM_OFFSET_MODEL);
- switch (board_id) {
- case IPACK1_DEVICE_ID_SBS_OCTAL_232:
- case IPACK1_DEVICE_ID_SBS_OCTAL_422:
- case IPACK1_DEVICE_ID_SBS_OCTAL_485:
- *id = board_id;
- break;
- default:
- return -ENODEV;
- }
-
- return 0;
-}
-
static const struct tty_port_operations ipoctal_tty_port_ops = {
.dtr_rts = NULL,
.activate = ipoctal_port_activate,
@@ -289,64 +269,55 @@
static int ipoctal_inst_slot(struct ipoctal *ipoctal, unsigned int bus_nr,
unsigned int slot)
{
- int res = 0;
+ int res;
int i;
struct tty_driver *tty;
char name[20];
- unsigned char board_id;
struct ipoctal_channel *channel;
+ struct ipack_region *region;
+ void __iomem *addr;
union scc2698_channel __iomem *chan_regs;
union scc2698_block __iomem *block_regs;
- res = ipoctal->dev->bus->ops->map_space(ipoctal->dev, 0,
- IPACK_ID_SPACE);
- if (res) {
- dev_err(&ipoctal->dev->dev,
- "Unable to map slot [%d:%d] ID space!\n",
- bus_nr, slot);
- return res;
- }
+ ipoctal->board_id = ipoctal->dev->id_device;
- res = ipoctal_check_model(ipoctal->dev, &board_id);
- if (res) {
- ipoctal->dev->bus->ops->unmap_space(ipoctal->dev,
- IPACK_ID_SPACE);
- goto out_unregister_id_space;
- }
- ipoctal->board_id = board_id;
-
- res = ipoctal->dev->bus->ops->map_space(ipoctal->dev, 0,
- IPACK_IO_SPACE);
- if (res) {
+ region = &ipoctal->dev->region[IPACK_IO_SPACE];
+ addr = devm_ioremap_nocache(&ipoctal->dev->dev,
+ region->start, region->size);
+ if (!addr) {
dev_err(&ipoctal->dev->dev,
"Unable to map slot [%d:%d] IO space!\n",
bus_nr, slot);
- goto out_unregister_id_space;
+ return -EADDRNOTAVAIL;
}
+ /* Save the virtual address to access the registers easily */
+ chan_regs =
+ (union scc2698_channel __iomem *) addr;
+ block_regs =
+ (union scc2698_block __iomem *) addr;
- res = ipoctal->dev->bus->ops->map_space(ipoctal->dev, 0,
- IPACK_INT_SPACE);
- if (res) {
+ region = &ipoctal->dev->region[IPACK_INT_SPACE];
+ ipoctal->int_space =
+ devm_ioremap_nocache(&ipoctal->dev->dev,
+ region->start, region->size);
+ if (!ipoctal->int_space) {
dev_err(&ipoctal->dev->dev,
"Unable to map slot [%d:%d] INT space!\n",
bus_nr, slot);
- goto out_unregister_io_space;
+ return -EADDRNOTAVAIL;
}
- res = ipoctal->dev->bus->ops->map_space(ipoctal->dev,
- 0x8000, IPACK_MEM_SPACE);
- if (res) {
+ region = &ipoctal->dev->region[IPACK_MEM8_SPACE];
+ ipoctal->mem8_space =
+ devm_ioremap_nocache(&ipoctal->dev->dev,
+ region->start, 0x8000);
+ if (!addr) {
dev_err(&ipoctal->dev->dev,
- "Unable to map slot [%d:%d] MEM space!\n",
+ "Unable to map slot [%d:%d] MEM8 space!\n",
bus_nr, slot);
- goto out_unregister_int_space;
+ return -EADDRNOTAVAIL;
}
- /* Save the virtual address to access the registers easily */
- chan_regs =
- (union scc2698_channel __iomem *) ipoctal->dev->io_space.address;
- block_regs =
- (union scc2698_block __iomem *) ipoctal->dev->io_space.address;
/* Disable RX and TX before touching anything */
for (i = 0; i < NR_CHANNELS ; i++) {
@@ -389,17 +360,15 @@
ipoctal->dev->bus->ops->request_irq(ipoctal->dev,
ipoctal_irq_handler, ipoctal);
/* Dummy write */
- iowrite8(1, ipoctal->dev->mem_space.address + 1);
+ iowrite8(1, ipoctal->mem8_space + 1);
/* Register the TTY device */
/* Each IP-OCTAL channel is a TTY port */
tty = alloc_tty_driver(NR_CHANNELS);
- if (!tty) {
- res = -ENOMEM;
- goto out_unregister_slot_unmap;
- }
+ if (!tty)
+ return -ENOMEM;
/* Fill struct tty_driver with ipoctal data */
tty->owner = THIS_MODULE;
@@ -422,7 +391,7 @@
if (res) {
dev_err(&ipoctal->dev->dev, "Can't register tty driver.\n");
put_tty_driver(tty);
- goto out_unregister_slot_unmap;
+ return res;
}
/* Save struct tty_driver for use it when uninstalling the device */
@@ -446,6 +415,7 @@
tty_dev = tty_port_register_device(&channel->tty_port, tty, i, NULL);
if (IS_ERR(tty_dev)) {
dev_err(&ipoctal->dev->dev, "Failed to register tty device.\n");
+ tty_port_destroy(&channel->tty_port);
continue;
}
dev_set_drvdata(tty_dev, channel);
@@ -458,16 +428,6 @@
}
return 0;
-
-out_unregister_slot_unmap:
- ipoctal->dev->bus->ops->unmap_space(ipoctal->dev, IPACK_ID_SPACE);
-out_unregister_int_space:
- ipoctal->dev->bus->ops->unmap_space(ipoctal->dev, IPACK_INT_SPACE);
-out_unregister_io_space:
- ipoctal->dev->bus->ops->unmap_space(ipoctal->dev, IPACK_IO_SPACE);
-out_unregister_id_space:
- ipoctal->dev->bus->ops->unmap_space(ipoctal->dev, IPACK_MEM_SPACE);
- return res;
}
static inline int ipoctal_copy_write_buffer(struct ipoctal_channel *channel,
@@ -719,7 +679,7 @@
return -ENOMEM;
ipoctal->dev = dev;
- res = ipoctal_inst_slot(ipoctal, dev->bus_nr, dev->slot);
+ res = ipoctal_inst_slot(ipoctal, dev->bus->bus_nr, dev->slot);
if (res)
goto out_uninst;
@@ -741,14 +701,11 @@
struct ipoctal_channel *channel = &ipoctal->channel[i];
tty_unregister_device(ipoctal->tty_drv, i);
tty_port_free_xmit_buf(&channel->tty_port);
+ tty_port_destroy(&channel->tty_port);
}
tty_unregister_driver(ipoctal->tty_drv);
put_tty_driver(ipoctal->tty_drv);
- ipoctal->dev->bus->ops->unmap_space(ipoctal->dev, IPACK_MEM_SPACE);
- ipoctal->dev->bus->ops->unmap_space(ipoctal->dev, IPACK_INT_SPACE);
- ipoctal->dev->bus->ops->unmap_space(ipoctal->dev, IPACK_IO_SPACE);
- ipoctal->dev->bus->ops->unmap_space(ipoctal->dev, IPACK_ID_SPACE);
kfree(ipoctal);
}
diff --git a/drivers/staging/ipack/devices/ipoctal.h b/drivers/ipack/devices/ipoctal.h
similarity index 82%
rename from drivers/staging/ipack/devices/ipoctal.h
rename to drivers/ipack/devices/ipoctal.h
index c5b4ed4..28f1c42 100644
--- a/drivers/staging/ipack/devices/ipoctal.h
+++ b/drivers/ipack/devices/ipoctal.h
@@ -2,9 +2,10 @@
* ipoctal.h
*
* driver for the IPOCTAL boards
- * Copyright (c) 2009 Nicolas Serafini, EIC2 SA
- * Copyright (c) 2010,2011 Samuel Iglesias Gonsalvez <siglesia@cern.ch>, CERN
- * Copyright (c) 2012 Samuel Iglesias Gonsalvez <siglesias@igalia.com>, Igalia
+
+ * Copyright (C) 2009-2012 CERN (www.cern.ch)
+ * Author: Nicolas Serafini, EIC2 SA
+ * Author: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
diff --git a/drivers/staging/ipack/devices/scc2698.h b/drivers/ipack/devices/scc2698.h
similarity index 97%
rename from drivers/staging/ipack/devices/scc2698.h
rename to drivers/ipack/devices/scc2698.h
index 96e8d8c..2ad6acd 100644
--- a/drivers/staging/ipack/devices/scc2698.h
+++ b/drivers/ipack/devices/scc2698.h
@@ -2,9 +2,10 @@
* scc2698.h
*
* driver for the IPOCTAL boards
- * Copyright (c) 2009 Nicolas Serafini, EIC2 SA
- * Copyright (c) 2010,2011 Samuel Iglesias Gonsalvez <siglesia@cern.ch>, CERN
- * Copyright (c) 2012 Samuel Iglesias Gonsalvez <siglesias@igalia.com>, Igalia
+ *
+ * Copyright (C) 2009-2012 CERN (www.cern.ch)
+ * Author: Nicolas Serafini, EIC2 SA
+ * Author: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
diff --git a/drivers/staging/ipack/ipack.c b/drivers/ipack/ipack.c
similarity index 90%
rename from drivers/staging/ipack/ipack.c
rename to drivers/ipack/ipack.c
index d1e0651..7ec6b20 100644
--- a/drivers/staging/ipack/ipack.c
+++ b/drivers/ipack/ipack.c
@@ -1,8 +1,8 @@
/*
* Industry-pack bus support functions.
*
- * (C) 2011 Samuel Iglesias Gonsalvez <siglesia@cern.ch>, CERN
- * (C) 2012 Samuel Iglesias Gonsalvez <siglesias@igalia.com>, Igalia
+ * Copyright (C) 2011-2012 CERN (www.cern.ch)
+ * Author: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
@@ -12,8 +12,8 @@
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/idr.h>
-#include <asm/io.h>
-#include "ipack.h"
+#include <linux/io.h>
+#include <linux/ipack.h>
#define to_ipack_dev(device) container_of(device, struct ipack_device, dev)
#define to_ipack_driver(drv) container_of(drv, struct ipack_driver, driver)
@@ -24,7 +24,7 @@
{
struct ipack_device *device = to_ipack_dev(dev);
kfree(device->id);
- kfree(device);
+ device->release(device);
}
static inline const struct ipack_device_id *
@@ -85,8 +85,6 @@
return 0;
}
-#ifdef CONFIG_HOTPLUG
-
static int ipack_uevent(struct device *dev, struct kobj_uevent_env *env)
{
struct ipack_device *idev;
@@ -104,12 +102,6 @@
return 0;
}
-#else /* !CONFIG_HOTPLUG */
-
-#define ipack_uevent NULL
-
-#endif /* !CONFIG_HOTPLUG */
-
#define ipack_device_attr(field, format_string) \
static ssize_t \
field##_show(struct device *dev, struct device_attribute *attr, \
@@ -234,7 +226,7 @@
struct ipack_device *idev = to_ipack_dev(dev);
struct ipack_bus_device *bus = data;
- if (idev->bus_nr == bus->bus_nr)
+ if (idev->bus == bus)
ipack_device_unregister(idev);
return 1;
@@ -242,7 +234,8 @@
int ipack_bus_unregister(struct ipack_bus_device *bus)
{
- bus_for_each_dev(&ipack_bus_type, NULL, bus, ipack_unregister_bus_member);
+ bus_for_each_dev(&ipack_bus_type, NULL, bus,
+ ipack_unregister_bus_member);
ida_simple_remove(&ipack_ida, bus->bus_nr);
kfree(bus);
return 0;
@@ -351,12 +344,12 @@
int i;
int ret = 0;
- ret = dev->bus->ops->map_space(dev, 0, IPACK_ID_SPACE);
- if (ret) {
+ idmem = ioremap(dev->region[IPACK_ID_SPACE].start,
+ dev->region[IPACK_ID_SPACE].size);
+ if (!idmem) {
dev_err(&dev->dev, "error mapping memory\n");
- return ret;
+ return -ENOMEM;
}
- idmem = dev->id_space.address;
/* Determine ID PROM Data Format. If we find the ids "IPAC" or "IPAH"
* we are dealing with a IndustryPack format 1 device. If we detect
@@ -421,57 +414,44 @@
}
out:
- dev->bus->ops->unmap_space(dev, IPACK_ID_SPACE);
+ iounmap(idmem);
return ret;
}
-struct ipack_device *ipack_device_register(struct ipack_bus_device *bus,
- int slot)
+int ipack_device_register(struct ipack_device *dev)
{
int ret;
- struct ipack_device *dev;
-
- dev = kzalloc(sizeof(struct ipack_device), GFP_KERNEL);
- if (!dev)
- return NULL;
dev->dev.bus = &ipack_bus_type;
dev->dev.release = ipack_device_release;
- dev->dev.parent = bus->parent;
- dev->slot = slot;
- dev->bus_nr = bus->bus_nr;
- dev->bus = bus;
+ dev->dev.parent = dev->bus->parent;
dev_set_name(&dev->dev,
- "ipack-dev.%u.%u", dev->bus_nr, dev->slot);
+ "ipack-dev.%u.%u", dev->bus->bus_nr, dev->slot);
- if (bus->ops->set_clockrate(dev, 8))
+ if (dev->bus->ops->set_clockrate(dev, 8))
dev_warn(&dev->dev, "failed to switch to 8 MHz operation for reading of device ID.\n");
- if (bus->ops->reset_timeout(dev))
+ if (dev->bus->ops->reset_timeout(dev))
dev_warn(&dev->dev, "failed to reset potential timeout.");
ret = ipack_device_read_id(dev);
if (ret < 0) {
dev_err(&dev->dev, "error reading device id section.\n");
- kfree(dev);
- return NULL;
+ return ret;
}
/* if the device supports 32 MHz operation, use it. */
if (dev->speed_32mhz) {
- ret = bus->ops->set_clockrate(dev, 32);
+ ret = dev->bus->ops->set_clockrate(dev, 32);
if (ret < 0)
dev_err(&dev->dev, "failed to switch to 32 MHz operation.\n");
}
ret = device_register(&dev->dev);
- if (ret < 0) {
+ if (ret < 0)
kfree(dev->id);
- kfree(dev);
- return NULL;
- }
- return dev;
+ return ret;
}
EXPORT_SYMBOL_GPL(ipack_device_register);
diff --git a/drivers/isdn/capi/capi.c b/drivers/isdn/capi/capi.c
index c679867..89562a8 100644
--- a/drivers/isdn/capi/capi.c
+++ b/drivers/isdn/capi/capi.c
@@ -77,8 +77,6 @@
};
struct capiminor {
- struct kref kref;
-
unsigned int minor;
struct capi20_appl *ap;
@@ -190,7 +188,20 @@
/* -------- struct capiminor ---------------------------------------- */
-static const struct tty_port_operations capiminor_port_ops; /* we have none */
+static void capiminor_destroy(struct tty_port *port)
+{
+ struct capiminor *mp = container_of(port, struct capiminor, port);
+
+ kfree_skb(mp->outskb);
+ skb_queue_purge(&mp->inqueue);
+ skb_queue_purge(&mp->outqueue);
+ capiminor_del_all_ack(mp);
+ kfree(mp);
+}
+
+static const struct tty_port_operations capiminor_port_ops = {
+ .destruct = capiminor_destroy,
+};
static struct capiminor *capiminor_alloc(struct capi20_appl *ap, u32 ncci)
{
@@ -204,8 +215,6 @@
return NULL;
}
- kref_init(&mp->kref);
-
mp->ap = ap;
mp->ncci = ncci;
INIT_LIST_HEAD(&mp->ackqueue);
@@ -247,21 +256,10 @@
spin_unlock(&capiminors_lock);
err_out1:
- kfree(mp);
+ tty_port_put(&mp->port);
return NULL;
}
-static void capiminor_destroy(struct kref *kref)
-{
- struct capiminor *mp = container_of(kref, struct capiminor, kref);
-
- kfree_skb(mp->outskb);
- skb_queue_purge(&mp->inqueue);
- skb_queue_purge(&mp->outqueue);
- capiminor_del_all_ack(mp);
- kfree(mp);
-}
-
static struct capiminor *capiminor_get(unsigned int minor)
{
struct capiminor *mp;
@@ -269,7 +267,7 @@
spin_lock(&capiminors_lock);
mp = capiminors[minor];
if (mp)
- kref_get(&mp->kref);
+ tty_port_get(&mp->port);
spin_unlock(&capiminors_lock);
return mp;
@@ -277,7 +275,7 @@
static inline void capiminor_put(struct capiminor *mp)
{
- kref_put(&mp->kref, capiminor_destroy);
+ tty_port_put(&mp->port);
}
static void capiminor_free(struct capiminor *mp)
diff --git a/drivers/isdn/gigaset/common.c b/drivers/isdn/gigaset/common.c
index 30a6b17..6849a11 100644
--- a/drivers/isdn/gigaset/common.c
+++ b/drivers/isdn/gigaset/common.c
@@ -507,6 +507,7 @@
gig_dbg(DEBUG_INIT, "clearing at_state");
clear_at_state(&cs->at_state);
dealloc_temp_at_states(cs);
+ tty_port_destroy(&cs->port);
/* fall through */
case 0: /* error in basic setup */
diff --git a/drivers/isdn/i4l/isdn_tty.c b/drivers/isdn/i4l/isdn_tty.c
index b817809..e09dc8a 100644
--- a/drivers/isdn/i4l/isdn_tty.c
+++ b/drivers/isdn/i4l/isdn_tty.c
@@ -1849,6 +1849,8 @@
kfree(info->fax);
#endif
kfree(info->port.xmit_buf - 4);
+ info->port.xmit_buf = NULL;
+ tty_port_destroy(&info->port);
}
tty_unregister_driver(m->tty_modem);
err:
@@ -1870,6 +1872,8 @@
kfree(info->fax);
#endif
kfree(info->port.xmit_buf - 4);
+ info->port.xmit_buf = NULL;
+ tty_port_destroy(&info->port);
}
tty_unregister_driver(dev->mdm.tty_modem);
put_tty_driver(dev->mdm.tty_modem);
diff --git a/drivers/leds/leds-adp5520.c b/drivers/leds/leds-adp5520.c
index aa56a86..dcd9128 100644
--- a/drivers/leds/leds-adp5520.c
+++ b/drivers/leds/leds-adp5520.c
@@ -85,7 +85,7 @@
return ret;
}
-static int __devinit adp5520_led_prepare(struct platform_device *pdev)
+static int adp5520_led_prepare(struct platform_device *pdev)
{
struct adp5520_leds_platform_data *pdata = pdev->dev.platform_data;
struct device *dev = pdev->dev.parent;
@@ -101,7 +101,7 @@
return ret;
}
-static int __devinit adp5520_led_probe(struct platform_device *pdev)
+static int adp5520_led_probe(struct platform_device *pdev)
{
struct adp5520_leds_platform_data *pdata = pdev->dev.platform_data;
struct adp5520_led *led, *led_dat;
@@ -183,7 +183,7 @@
return ret;
}
-static int __devexit adp5520_led_remove(struct platform_device *pdev)
+static int adp5520_led_remove(struct platform_device *pdev)
{
struct adp5520_leds_platform_data *pdata = pdev->dev.platform_data;
struct adp5520_led *led;
@@ -208,7 +208,7 @@
.owner = THIS_MODULE,
},
.probe = adp5520_led_probe,
- .remove = __devexit_p(adp5520_led_remove),
+ .remove = adp5520_led_remove,
};
module_platform_driver(adp5520_led_driver);
diff --git a/drivers/leds/leds-asic3.c b/drivers/leds/leds-asic3.c
index 5de74ff..b474745 100644
--- a/drivers/leds/leds-asic3.c
+++ b/drivers/leds/leds-asic3.c
@@ -92,7 +92,7 @@
return 0;
}
-static int __devinit asic3_led_probe(struct platform_device *pdev)
+static int asic3_led_probe(struct platform_device *pdev)
{
struct asic3_led *led = pdev->dev.platform_data;
int ret;
@@ -125,7 +125,7 @@
return ret;
}
-static int __devexit asic3_led_remove(struct platform_device *pdev)
+static int asic3_led_remove(struct platform_device *pdev)
{
struct asic3_led *led = pdev->dev.platform_data;
@@ -167,7 +167,7 @@
static struct platform_driver asic3_led_driver = {
.probe = asic3_led_probe,
- .remove = __devexit_p(asic3_led_remove),
+ .remove = asic3_led_remove,
.driver = {
.name = "leds-asic3",
.owner = THIS_MODULE,
diff --git a/drivers/leds/leds-atmel-pwm.c b/drivers/leds/leds-atmel-pwm.c
index 4543063..3867735 100644
--- a/drivers/leds/leds-atmel-pwm.c
+++ b/drivers/leds/leds-atmel-pwm.c
@@ -35,7 +35,7 @@
* NOTE: we reuse the platform_data structure of GPIO leds,
* but repurpose its "gpio" number as a PWM channel number.
*/
-static int __devinit pwmled_probe(struct platform_device *pdev)
+static int pwmled_probe(struct platform_device *pdev)
{
const struct gpio_led_platform_data *pdata;
struct pwmled *leds;
diff --git a/drivers/leds/leds-bd2802.c b/drivers/leds/leds-bd2802.c
index 89ca6a2..9abe8de 100644
--- a/drivers/leds/leds-bd2802.c
+++ b/drivers/leds/leds-bd2802.c
@@ -670,7 +670,7 @@
led_classdev_unregister(&led->cdev_led1r);
}
-static int __devinit bd2802_probe(struct i2c_client *client,
+static int bd2802_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct bd2802_led *led;
diff --git a/drivers/leds/leds-blinkm.c b/drivers/leds/leds-blinkm.c
index f7c3d7f..a502678 100644
--- a/drivers/leds/leds-blinkm.c
+++ b/drivers/leds/leds-blinkm.c
@@ -632,7 +632,7 @@
return 0;
}
-static int __devinit blinkm_probe(struct i2c_client *client,
+static int blinkm_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct blinkm_data *data;
@@ -743,7 +743,7 @@
return err;
}
-static int __devexit blinkm_remove(struct i2c_client *client)
+static int blinkm_remove(struct i2c_client *client)
{
struct blinkm_data *data = i2c_get_clientdata(client);
int ret = 0;
@@ -801,7 +801,7 @@
.name = "blinkm",
},
.probe = blinkm_probe,
- .remove = __devexit_p(blinkm_remove),
+ .remove = blinkm_remove,
.id_table = blinkm_id,
.detect = blinkm_detect,
.address_list = normal_i2c,
diff --git a/drivers/leds/leds-clevo-mail.c b/drivers/leds/leds-clevo-mail.c
index e024b0b..b025470 100644
--- a/drivers/leds/leds-clevo-mail.c
+++ b/drivers/leds/leds-clevo-mail.c
@@ -153,7 +153,7 @@
.flags = LED_CORE_SUSPENDRESUME,
};
-static int __devinit clevo_mail_led_probe(struct platform_device *pdev)
+static int clevo_mail_led_probe(struct platform_device *pdev)
{
return led_classdev_register(&pdev->dev, &clevo_mail_led);
}
diff --git a/drivers/leds/leds-cobalt-qube.c b/drivers/leds/leds-cobalt-qube.c
index 6a8725c..ffa9930 100644
--- a/drivers/leds/leds-cobalt-qube.c
+++ b/drivers/leds/leds-cobalt-qube.c
@@ -34,7 +34,7 @@
.default_trigger = "default-on",
};
-static int __devinit cobalt_qube_led_probe(struct platform_device *pdev)
+static int cobalt_qube_led_probe(struct platform_device *pdev)
{
struct resource *res;
int retval;
@@ -63,7 +63,7 @@
return retval;
}
-static int __devexit cobalt_qube_led_remove(struct platform_device *pdev)
+static int cobalt_qube_led_remove(struct platform_device *pdev)
{
led_classdev_unregister(&qube_front_led);
@@ -77,7 +77,7 @@
static struct platform_driver cobalt_qube_led_driver = {
.probe = cobalt_qube_led_probe,
- .remove = __devexit_p(cobalt_qube_led_remove),
+ .remove = cobalt_qube_led_remove,
.driver = {
.name = "cobalt-qube-leds",
.owner = THIS_MODULE,
diff --git a/drivers/leds/leds-cobalt-raq.c b/drivers/leds/leds-cobalt-raq.c
index aac1c07..d52e47d 100644
--- a/drivers/leds/leds-cobalt-raq.c
+++ b/drivers/leds/leds-cobalt-raq.c
@@ -76,7 +76,7 @@
.default_trigger = "power-off",
};
-static int __devinit cobalt_raq_led_probe(struct platform_device *pdev)
+static int cobalt_raq_led_probe(struct platform_device *pdev)
{
struct resource *res;
int retval;
@@ -109,7 +109,7 @@
return retval;
}
-static int __devexit cobalt_raq_led_remove(struct platform_device *pdev)
+static int cobalt_raq_led_remove(struct platform_device *pdev)
{
led_classdev_unregister(&raq_power_off_led);
led_classdev_unregister(&raq_web_led);
@@ -124,7 +124,7 @@
static struct platform_driver cobalt_raq_led_driver = {
.probe = cobalt_raq_led_probe,
- .remove = __devexit_p(cobalt_raq_led_remove),
+ .remove = cobalt_raq_led_remove,
.driver = {
.name = "cobalt-raq-leds",
.owner = THIS_MODULE,
diff --git a/drivers/leds/leds-da903x.c b/drivers/leds/leds-da903x.c
index cc77c9d..6f31b77 100644
--- a/drivers/leds/leds-da903x.c
+++ b/drivers/leds/leds-da903x.c
@@ -91,7 +91,7 @@
schedule_work(&led->work);
}
-static int __devinit da903x_led_probe(struct platform_device *pdev)
+static int da903x_led_probe(struct platform_device *pdev)
{
struct led_info *pdata = pdev->dev.platform_data;
struct da903x_led *led;
@@ -136,7 +136,7 @@
return 0;
}
-static int __devexit da903x_led_remove(struct platform_device *pdev)
+static int da903x_led_remove(struct platform_device *pdev)
{
struct da903x_led *led = platform_get_drvdata(pdev);
@@ -150,7 +150,7 @@
.owner = THIS_MODULE,
},
.probe = da903x_led_probe,
- .remove = __devexit_p(da903x_led_remove),
+ .remove = da903x_led_remove,
};
module_platform_driver(da903x_led_driver);
diff --git a/drivers/leds/leds-da9052.c b/drivers/leds/leds-da9052.c
index 58a5244..efec433 100644
--- a/drivers/leds/leds-da9052.c
+++ b/drivers/leds/leds-da9052.c
@@ -102,7 +102,7 @@
return error;
}
-static int __devinit da9052_led_probe(struct platform_device *pdev)
+static int da9052_led_probe(struct platform_device *pdev)
{
struct da9052_pdata *pdata;
struct da9052 *da9052;
@@ -176,7 +176,7 @@
return error;
}
-static int __devexit da9052_led_remove(struct platform_device *pdev)
+static int da9052_led_remove(struct platform_device *pdev)
{
struct da9052_led *led = platform_get_drvdata(pdev);
struct da9052_pdata *pdata;
@@ -204,7 +204,7 @@
.owner = THIS_MODULE,
},
.probe = da9052_led_probe,
- .remove = __devexit_p(da9052_led_remove),
+ .remove = da9052_led_remove,
};
module_platform_driver(da9052_led_driver);
diff --git a/drivers/leds/leds-gpio.c b/drivers/leds/leds-gpio.c
index 087d1e6..291c207 100644
--- a/drivers/leds/leds-gpio.c
+++ b/drivers/leds/leds-gpio.c
@@ -91,7 +91,7 @@
delay_on, delay_off);
}
-static int __devinit create_gpio_led(const struct gpio_led *template,
+static int create_gpio_led(const struct gpio_led *template,
struct gpio_led_data *led_dat, struct device *parent,
int (*blink_set)(unsigned, int, unsigned long *, unsigned long *))
{
@@ -167,7 +167,7 @@
/* Code to create from OpenFirmware platform devices */
#ifdef CONFIG_OF_GPIO
-static struct gpio_leds_priv * __devinit gpio_leds_create_of(struct platform_device *pdev)
+static struct gpio_leds_priv *gpio_leds_create_of(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node, *child;
struct gpio_leds_priv *priv;
@@ -224,14 +224,14 @@
{},
};
#else /* CONFIG_OF_GPIO */
-static struct gpio_leds_priv * __devinit gpio_leds_create_of(struct platform_device *pdev)
+static struct gpio_leds_priv *gpio_leds_create_of(struct platform_device *pdev)
{
return NULL;
}
#endif /* CONFIG_OF_GPIO */
-static int __devinit gpio_led_probe(struct platform_device *pdev)
+static int gpio_led_probe(struct platform_device *pdev)
{
struct gpio_led_platform_data *pdata = pdev->dev.platform_data;
struct gpio_leds_priv *priv;
@@ -273,7 +273,7 @@
return 0;
}
-static int __devexit gpio_led_remove(struct platform_device *pdev)
+static int gpio_led_remove(struct platform_device *pdev)
{
struct gpio_leds_priv *priv = platform_get_drvdata(pdev);
int i;
@@ -288,7 +288,7 @@
static struct platform_driver gpio_led_driver = {
.probe = gpio_led_probe,
- .remove = __devexit_p(gpio_led_remove),
+ .remove = gpio_led_remove,
.driver = {
.name = "leds-gpio",
.owner = THIS_MODULE,
diff --git a/drivers/leds/leds-lm3530.c b/drivers/leds/leds-lm3530.c
index b26306f..2141454 100644
--- a/drivers/leds/leds-lm3530.c
+++ b/drivers/leds/leds-lm3530.c
@@ -377,7 +377,7 @@
}
static DEVICE_ATTR(mode, 0644, lm3530_mode_get, lm3530_mode_set);
-static int __devinit lm3530_probe(struct i2c_client *client,
+static int lm3530_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct lm3530_platform_data *pdata = client->dev.platform_data;
@@ -452,7 +452,7 @@
return err;
}
-static int __devexit lm3530_remove(struct i2c_client *client)
+static int lm3530_remove(struct i2c_client *client)
{
struct lm3530_data *drvdata = i2c_get_clientdata(client);
@@ -472,7 +472,7 @@
static struct i2c_driver lm3530_i2c_driver = {
.probe = lm3530_probe,
- .remove = __devexit_p(lm3530_remove),
+ .remove = lm3530_remove,
.id_table = lm3530_id,
.driver = {
.name = LM3530_NAME,
diff --git a/drivers/leds/leds-lm3533.c b/drivers/leds/leds-lm3533.c
index f6837b9..bbf24d0 100644
--- a/drivers/leds/leds-lm3533.c
+++ b/drivers/leds/leds-lm3533.c
@@ -646,7 +646,7 @@
.attrs = lm3533_led_attributes
};
-static int __devinit lm3533_led_setup(struct lm3533_led *led,
+static int lm3533_led_setup(struct lm3533_led *led,
struct lm3533_led_platform_data *pdata)
{
int ret;
@@ -658,7 +658,7 @@
return lm3533_ctrlbank_set_pwm(&led->cb, pdata->pwm);
}
-static int __devinit lm3533_led_probe(struct platform_device *pdev)
+static int lm3533_led_probe(struct platform_device *pdev)
{
struct lm3533 *lm3533;
struct lm3533_led_platform_data *pdata;
@@ -742,7 +742,7 @@
return ret;
}
-static int __devexit lm3533_led_remove(struct platform_device *pdev)
+static int lm3533_led_remove(struct platform_device *pdev)
{
struct lm3533_led *led = platform_get_drvdata(pdev);
@@ -774,7 +774,7 @@
.owner = THIS_MODULE,
},
.probe = lm3533_led_probe,
- .remove = __devexit_p(lm3533_led_remove),
+ .remove = lm3533_led_remove,
.shutdown = lm3533_led_shutdown,
};
module_platform_driver(lm3533_led_driver);
diff --git a/drivers/leds/leds-lm355x.c b/drivers/leds/leds-lm355x.c
index 065ec01..b13ce03 100644
--- a/drivers/leds/leds-lm355x.c
+++ b/drivers/leds/leds-lm355x.c
@@ -168,7 +168,7 @@
};
/* chip initialize */
-static int __devinit lm355x_chip_init(struct lm355x_chip_data *chip)
+static int lm355x_chip_init(struct lm355x_chip_data *chip)
{
int ret;
unsigned int reg_val;
@@ -420,7 +420,7 @@
};
/* module initialize */
-static int __devinit lm355x_probe(struct i2c_client *client,
+static int lm355x_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct lm355x_platform_data *pdata = client->dev.platform_data;
@@ -526,7 +526,7 @@
return err;
}
-static int __devexit lm355x_remove(struct i2c_client *client)
+static int lm355x_remove(struct i2c_client *client)
{
struct lm355x_chip_data *chip = i2c_get_clientdata(client);
struct lm355x_reg_data *preg = chip->regs;
@@ -560,7 +560,7 @@
.pm = NULL,
},
.probe = lm355x_probe,
- .remove = __devexit_p(lm355x_remove),
+ .remove = lm355x_remove,
.id_table = lm355x_id,
};
diff --git a/drivers/leds/leds-lm3642.c b/drivers/leds/leds-lm3642.c
index 3285006..215a7c1 100644
--- a/drivers/leds/leds-lm3642.c
+++ b/drivers/leds/leds-lm3642.c
@@ -93,7 +93,7 @@
};
/* chip initialize */
-static int __devinit lm3642_chip_init(struct lm3642_chip_data *chip)
+static int lm3642_chip_init(struct lm3642_chip_data *chip)
{
int ret;
struct lm3642_platform_data *pdata = chip->pdata;
@@ -313,7 +313,7 @@
.max_register = REG_MAX,
};
-static int __devinit lm3642_probe(struct i2c_client *client,
+static int lm3642_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct lm3642_platform_data *pdata = client->dev.platform_data;
@@ -420,7 +420,7 @@
return err;
}
-static int __devexit lm3642_remove(struct i2c_client *client)
+static int lm3642_remove(struct i2c_client *client)
{
struct lm3642_chip_data *chip = i2c_get_clientdata(client);
@@ -450,7 +450,7 @@
.pm = NULL,
},
.probe = lm3642_probe,
- .remove = __devexit_p(lm3642_remove),
+ .remove = lm3642_remove,
.id_table = lm3642_id,
};
diff --git a/drivers/leds/leds-lp3944.c b/drivers/leds/leds-lp3944.c
index c298f7d..b081f67 100644
--- a/drivers/leds/leds-lp3944.c
+++ b/drivers/leds/leds-lp3944.c
@@ -374,7 +374,7 @@
return err;
}
-static int __devinit lp3944_probe(struct i2c_client *client,
+static int lp3944_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct lp3944_platform_data *lp3944_pdata = client->dev.platform_data;
@@ -411,7 +411,7 @@
return 0;
}
-static int __devexit lp3944_remove(struct i2c_client *client)
+static int lp3944_remove(struct i2c_client *client)
{
struct lp3944_platform_data *pdata = client->dev.platform_data;
struct lp3944_data *data = i2c_get_clientdata(client);
@@ -446,7 +446,7 @@
.name = "lp3944",
},
.probe = lp3944_probe,
- .remove = __devexit_p(lp3944_remove),
+ .remove = lp3944_remove,
.id_table = lp3944_id,
};
diff --git a/drivers/leds/leds-lp5521.c b/drivers/leds/leds-lp5521.c
index 2064aef..966f158 100644
--- a/drivers/leds/leds-lp5521.c
+++ b/drivers/leds/leds-lp5521.c
@@ -687,7 +687,7 @@
&lp5521_led_attribute_group);
}
-static int __devinit lp5521_init_led(struct lp5521_led *led,
+static int lp5521_init_led(struct lp5521_led *led,
struct i2c_client *client,
int chan, struct lp5521_platform_data *pdata)
{
@@ -736,7 +736,7 @@
return 0;
}
-static int __devinit lp5521_probe(struct i2c_client *client,
+static int lp5521_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct lp5521_chip *chip;
@@ -855,7 +855,7 @@
return ret;
}
-static int __devexit lp5521_remove(struct i2c_client *client)
+static int lp5521_remove(struct i2c_client *client)
{
struct lp5521_chip *chip = i2c_get_clientdata(client);
int i;
@@ -886,7 +886,7 @@
.name = "lp5521",
},
.probe = lp5521_probe,
- .remove = __devexit_p(lp5521_remove),
+ .remove = lp5521_remove,
.id_table = lp5521_id,
};
diff --git a/drivers/leds/leds-lp5523.c b/drivers/leds/leds-lp5523.c
index 97994ff..7e304b7 100644
--- a/drivers/leds/leds-lp5523.c
+++ b/drivers/leds/leds-lp5523.c
@@ -833,7 +833,7 @@
return 0;
}
-static int __devinit lp5523_init_led(struct lp5523_led *led, struct device *dev,
+static int lp5523_init_led(struct lp5523_led *led, struct device *dev,
int chan, struct lp5523_platform_data *pdata,
const char *chip_name)
{
@@ -882,7 +882,7 @@
return 0;
}
-static int __devinit lp5523_probe(struct i2c_client *client,
+static int lp5523_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct lp5523_chip *chip;
diff --git a/drivers/leds/leds-lp8788.c b/drivers/leds/leds-lp8788.c
index 64009a1..4353942 100644
--- a/drivers/leds/leds-lp8788.c
+++ b/drivers/leds/leds-lp8788.c
@@ -125,7 +125,7 @@
schedule_work(&led->work);
}
-static __devinit int lp8788_led_probe(struct platform_device *pdev)
+static int lp8788_led_probe(struct platform_device *pdev)
{
struct lp8788 *lp = dev_get_drvdata(pdev->dev.parent);
struct lp8788_led_platform_data *led_pdata;
@@ -167,7 +167,7 @@
return 0;
}
-static int __devexit lp8788_led_remove(struct platform_device *pdev)
+static int lp8788_led_remove(struct platform_device *pdev)
{
struct lp8788_led *led = platform_get_drvdata(pdev);
@@ -179,7 +179,7 @@
static struct platform_driver lp8788_led_driver = {
.probe = lp8788_led_probe,
- .remove = __devexit_p(lp8788_led_remove),
+ .remove = lp8788_led_remove,
.driver = {
.name = LP8788_DEV_KEYLED,
.owner = THIS_MODULE,
diff --git a/drivers/leds/leds-lt3593.c b/drivers/leds/leds-lt3593.c
index 09a7322..34b3ba4 100644
--- a/drivers/leds/leds-lt3593.c
+++ b/drivers/leds/leds-lt3593.c
@@ -82,7 +82,7 @@
schedule_work(&led_dat->work);
}
-static int __devinit create_lt3593_led(const struct gpio_led *template,
+static int create_lt3593_led(const struct gpio_led *template,
struct lt3593_led_data *led_dat, struct device *parent)
{
int ret, state;
@@ -140,7 +140,7 @@
gpio_free(led->gpio);
}
-static int __devinit lt3593_led_probe(struct platform_device *pdev)
+static int lt3593_led_probe(struct platform_device *pdev)
{
struct gpio_led_platform_data *pdata = pdev->dev.platform_data;
struct lt3593_led_data *leds_data;
@@ -173,7 +173,7 @@
return ret;
}
-static int __devexit lt3593_led_remove(struct platform_device *pdev)
+static int lt3593_led_remove(struct platform_device *pdev)
{
int i;
struct gpio_led_platform_data *pdata = pdev->dev.platform_data;
@@ -189,7 +189,7 @@
static struct platform_driver lt3593_led_driver = {
.probe = lt3593_led_probe,
- .remove = __devexit_p(lt3593_led_remove),
+ .remove = lt3593_led_remove,
.driver = {
.name = "leds-lt3593",
.owner = THIS_MODULE,
diff --git a/drivers/leds/leds-max8997.c b/drivers/leds/leds-max8997.c
index 569e36d..f449a8b 100644
--- a/drivers/leds/leds-max8997.c
+++ b/drivers/leds/leds-max8997.c
@@ -229,7 +229,7 @@
static DEVICE_ATTR(mode, 0644, max8997_led_show_mode, max8997_led_store_mode);
-static int __devinit max8997_led_probe(struct platform_device *pdev)
+static int max8997_led_probe(struct platform_device *pdev)
{
struct max8997_dev *iodev = dev_get_drvdata(pdev->dev.parent);
struct max8997_platform_data *pdata = dev_get_platdata(iodev->dev);
@@ -292,7 +292,7 @@
return 0;
}
-static int __devexit max8997_led_remove(struct platform_device *pdev)
+static int max8997_led_remove(struct platform_device *pdev)
{
struct max8997_led *led = platform_get_drvdata(pdev);
@@ -308,7 +308,7 @@
.owner = THIS_MODULE,
},
.probe = max8997_led_probe,
- .remove = __devexit_p(max8997_led_remove),
+ .remove = max8997_led_remove,
};
module_platform_driver(max8997_led_driver);
diff --git a/drivers/leds/leds-mc13783.c b/drivers/leds/leds-mc13783.c
index 2a5d434..e942ada 100644
--- a/drivers/leds/leds-mc13783.c
+++ b/drivers/leds/leds-mc13783.c
@@ -128,7 +128,7 @@
schedule_work(&led->work);
}
-static int __devinit mc13783_led_setup(struct mc13783_led *led, int max_current)
+static int mc13783_led_setup(struct mc13783_led *led, int max_current)
{
int shift = 0;
int mask = 0;
@@ -181,7 +181,7 @@
return ret;
}
-static int __devinit mc13783_leds_prepare(struct platform_device *pdev)
+static int mc13783_leds_prepare(struct platform_device *pdev)
{
struct mc13xxx_leds_platform_data *pdata = dev_get_platdata(&pdev->dev);
struct mc13xxx *dev = dev_get_drvdata(pdev->dev.parent);
@@ -262,7 +262,7 @@
return ret;
}
-static int __devinit mc13783_led_probe(struct platform_device *pdev)
+static int mc13783_led_probe(struct platform_device *pdev)
{
struct mc13xxx_leds_platform_data *pdata = dev_get_platdata(&pdev->dev);
struct mc13xxx_led_platform_data *led_cur;
@@ -348,7 +348,7 @@
return ret;
}
-static int __devexit mc13783_led_remove(struct platform_device *pdev)
+static int mc13783_led_remove(struct platform_device *pdev)
{
struct mc13xxx_leds_platform_data *pdata = dev_get_platdata(&pdev->dev);
struct mc13783_led *led = platform_get_drvdata(pdev);
@@ -381,7 +381,7 @@
.owner = THIS_MODULE,
},
.probe = mc13783_led_probe,
- .remove = __devexit_p(mc13783_led_remove),
+ .remove = mc13783_led_remove,
};
module_platform_driver(mc13783_led_driver);
diff --git a/drivers/leds/leds-netxbig.c b/drivers/leds/leds-netxbig.c
index 461bbf9..58a800b 100644
--- a/drivers/leds/leds-netxbig.c
+++ b/drivers/leds/leds-netxbig.c
@@ -71,7 +71,7 @@
spin_unlock_irqrestore(&gpio_ext_lock, flags);
}
-static int __devinit gpio_ext_init(struct netxbig_gpio_ext *gpio_ext)
+static int gpio_ext_init(struct netxbig_gpio_ext *gpio_ext)
{
int err;
int i;
@@ -301,7 +301,7 @@
led_classdev_unregister(&led_dat->cdev);
}
-static int __devinit
+static int
create_netxbig_led(struct platform_device *pdev,
struct netxbig_led_data *led_dat,
const struct netxbig_led *template)
@@ -352,7 +352,7 @@
return ret;
}
-static int __devinit netxbig_led_probe(struct platform_device *pdev)
+static int netxbig_led_probe(struct platform_device *pdev)
{
struct netxbig_led_platform_data *pdata = pdev->dev.platform_data;
struct netxbig_led_data *leds_data;
@@ -389,7 +389,7 @@
return ret;
}
-static int __devexit netxbig_led_remove(struct platform_device *pdev)
+static int netxbig_led_remove(struct platform_device *pdev)
{
struct netxbig_led_platform_data *pdata = pdev->dev.platform_data;
struct netxbig_led_data *leds_data;
@@ -407,7 +407,7 @@
static struct platform_driver netxbig_led_driver = {
.probe = netxbig_led_probe,
- .remove = __devexit_p(netxbig_led_remove),
+ .remove = netxbig_led_remove,
.driver = {
.name = "leds-netxbig",
.owner = THIS_MODULE,
diff --git a/drivers/leds/leds-ns2.c b/drivers/leds/leds-ns2.c
index d176ec8..6315e88 100644
--- a/drivers/leds/leds-ns2.c
+++ b/drivers/leds/leds-ns2.c
@@ -184,7 +184,7 @@
static DEVICE_ATTR(sata, 0644, ns2_led_sata_show, ns2_led_sata_store);
-static int __devinit
+static int
create_ns2_led(struct platform_device *pdev, struct ns2_led_data *led_dat,
const struct ns2_led *template)
{
@@ -263,7 +263,7 @@
gpio_free(led_dat->slow);
}
-static int __devinit ns2_led_probe(struct platform_device *pdev)
+static int ns2_led_probe(struct platform_device *pdev)
{
struct ns2_led_platform_data *pdata = pdev->dev.platform_data;
struct ns2_led_data *leds_data;
@@ -292,7 +292,7 @@
return 0;
}
-static int __devexit ns2_led_remove(struct platform_device *pdev)
+static int ns2_led_remove(struct platform_device *pdev)
{
int i;
struct ns2_led_platform_data *pdata = pdev->dev.platform_data;
@@ -310,7 +310,7 @@
static struct platform_driver ns2_led_driver = {
.probe = ns2_led_probe,
- .remove = __devexit_p(ns2_led_remove),
+ .remove = ns2_led_remove,
.driver = {
.name = "leds-ns2",
.owner = THIS_MODULE,
diff --git a/drivers/leds/leds-ot200.c b/drivers/leds/leds-ot200.c
index c464682..ee14662e 100644
--- a/drivers/leds/leds-ot200.c
+++ b/drivers/leds/leds-ot200.c
@@ -115,7 +115,7 @@
spin_unlock_irqrestore(&value_lock, flags);
}
-static int __devinit ot200_led_probe(struct platform_device *pdev)
+static int ot200_led_probe(struct platform_device *pdev)
{
int i;
int ret;
@@ -144,7 +144,7 @@
return ret;
}
-static int __devexit ot200_led_remove(struct platform_device *pdev)
+static int ot200_led_remove(struct platform_device *pdev)
{
int i;
@@ -156,7 +156,7 @@
static struct platform_driver ot200_led_driver = {
.probe = ot200_led_probe,
- .remove = __devexit_p(ot200_led_remove),
+ .remove = ot200_led_remove,
.driver = {
.name = "leds-ot200",
.owner = THIS_MODULE,
diff --git a/drivers/leds/leds-pca955x.c b/drivers/leds/leds-pca955x.c
index aef3cf0..706791a 100644
--- a/drivers/leds/leds-pca955x.c
+++ b/drivers/leds/leds-pca955x.c
@@ -255,7 +255,7 @@
schedule_work(&pca955x->work);
}
-static int __devinit pca955x_probe(struct i2c_client *client,
+static int pca955x_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct pca955x *pca955x;
@@ -363,7 +363,7 @@
return err;
}
-static int __devexit pca955x_remove(struct i2c_client *client)
+static int pca955x_remove(struct i2c_client *client)
{
struct pca955x *pca955x = i2c_get_clientdata(client);
int i;
@@ -382,7 +382,7 @@
.owner = THIS_MODULE,
},
.probe = pca955x_probe,
- .remove = __devexit_p(pca955x_remove),
+ .remove = pca955x_remove,
.id_table = pca955x_id,
};
diff --git a/drivers/leds/leds-pca9633.c b/drivers/leds/leds-pca9633.c
index 2f2f9c4..9aae567 100644
--- a/drivers/leds/leds-pca9633.c
+++ b/drivers/leds/leds-pca9633.c
@@ -93,7 +93,7 @@
schedule_work(&pca9633->work);
}
-static int __devinit pca9633_probe(struct i2c_client *client,
+static int pca9633_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct pca9633_led *pca9633;
@@ -164,7 +164,7 @@
return err;
}
-static int __devexit pca9633_remove(struct i2c_client *client)
+static int pca9633_remove(struct i2c_client *client)
{
struct pca9633_led *pca9633 = i2c_get_clientdata(client);
int i;
@@ -183,7 +183,7 @@
.owner = THIS_MODULE,
},
.probe = pca9633_probe,
- .remove = __devexit_p(pca9633_remove),
+ .remove = pca9633_remove,
.id_table = pca9633_id,
};
diff --git a/drivers/leds/leds-pwm.c b/drivers/leds/leds-pwm.c
index f2e44c7..e51ff7a 100644
--- a/drivers/leds/leds-pwm.c
+++ b/drivers/leds/leds-pwm.c
@@ -107,7 +107,7 @@
return ret;
}
-static int __devexit led_pwm_remove(struct platform_device *pdev)
+static int led_pwm_remove(struct platform_device *pdev)
{
int i;
struct led_pwm_platform_data *pdata = pdev->dev.platform_data;
@@ -125,7 +125,7 @@
static struct platform_driver led_pwm_driver = {
.probe = led_pwm_probe,
- .remove = __devexit_p(led_pwm_remove),
+ .remove = led_pwm_remove,
.driver = {
.name = "leds_pwm",
.owner = THIS_MODULE,
diff --git a/drivers/leds/leds-rb532.c b/drivers/leds/leds-rb532.c
index a7815b6..9ebdd50 100644
--- a/drivers/leds/leds-rb532.c
+++ b/drivers/leds/leds-rb532.c
@@ -37,12 +37,12 @@
.default_trigger = "nand-disk",
};
-static int __devinit rb532_led_probe(struct platform_device *pdev)
+static int rb532_led_probe(struct platform_device *pdev)
{
return led_classdev_register(&pdev->dev, &rb532_uled);
}
-static int __devexit rb532_led_remove(struct platform_device *pdev)
+static int rb532_led_remove(struct platform_device *pdev)
{
led_classdev_unregister(&rb532_uled);
return 0;
@@ -50,7 +50,7 @@
static struct platform_driver rb532_led_driver = {
.probe = rb532_led_probe,
- .remove = __devexit_p(rb532_led_remove),
+ .remove = rb532_led_remove,
.driver = {
.name = "rb532-led",
.owner = THIS_MODULE,
diff --git a/drivers/leds/leds-regulator.c b/drivers/leds/leds-regulator.c
index 25d382d..4253a9b 100644
--- a/drivers/leds/leds-regulator.c
+++ b/drivers/leds/leds-regulator.c
@@ -140,7 +140,7 @@
schedule_work(&led->work);
}
-static int __devinit regulator_led_probe(struct platform_device *pdev)
+static int regulator_led_probe(struct platform_device *pdev)
{
struct led_regulator_platform_data *pdata = pdev->dev.platform_data;
struct regulator_led *led;
@@ -206,7 +206,7 @@
return ret;
}
-static int __devexit regulator_led_remove(struct platform_device *pdev)
+static int regulator_led_remove(struct platform_device *pdev)
{
struct regulator_led *led = platform_get_drvdata(pdev);
@@ -223,7 +223,7 @@
.owner = THIS_MODULE,
},
.probe = regulator_led_probe,
- .remove = __devexit_p(regulator_led_remove),
+ .remove = regulator_led_remove,
};
module_platform_driver(regulator_led_driver);
diff --git a/drivers/leds/leds-renesas-tpu.c b/drivers/leds/leds-renesas-tpu.c
index 771ea06..bc89847 100644
--- a/drivers/leds/leds-renesas-tpu.c
+++ b/drivers/leds/leds-renesas-tpu.c
@@ -238,7 +238,7 @@
schedule_work(&p->work);
}
-static int __devinit r_tpu_probe(struct platform_device *pdev)
+static int r_tpu_probe(struct platform_device *pdev)
{
struct led_renesas_tpu_config *cfg = pdev->dev.platform_data;
struct r_tpu_priv *p;
@@ -309,7 +309,7 @@
return ret;
}
-static int __devexit r_tpu_remove(struct platform_device *pdev)
+static int r_tpu_remove(struct platform_device *pdev)
{
struct r_tpu_priv *p = platform_get_drvdata(pdev);
@@ -328,7 +328,7 @@
static struct platform_driver r_tpu_device_driver = {
.probe = r_tpu_probe,
- .remove = __devexit_p(r_tpu_remove),
+ .remove = r_tpu_remove,
.driver = {
.name = "leds-renesas-tpu",
}
diff --git a/drivers/leds/leds-ss4200.c b/drivers/leds/leds-ss4200.c
index 57371e1..6469849 100644
--- a/drivers/leds/leds-ss4200.c
+++ b/drivers/leds/leds-ss4200.c
@@ -263,7 +263,7 @@
* already taken care of this, but we will do so in a non destructive manner
* so that we have what we need whether the BIOS did it or not.
*/
-static int __devinit ich7_gpio_init(struct device *dev)
+static int ich7_gpio_init(struct device *dev)
{
int i;
u32 config_data = 0;
@@ -342,7 +342,7 @@
* so we can retrive the required operational information and prepare the GPIO.
*/
static struct pci_dev *nas_gpio_pci_dev;
-static int __devinit ich7_lpc_probe(struct pci_dev *dev,
+static int ich7_lpc_probe(struct pci_dev *dev,
const struct pci_device_id *id)
{
int status;
diff --git a/drivers/leds/leds-sunfire.c b/drivers/leds/leds-sunfire.c
index 134d9a4..07ff5a3 100644
--- a/drivers/leds/leds-sunfire.c
+++ b/drivers/leds/leds-sunfire.c
@@ -123,7 +123,7 @@
struct sunfire_led leds[NUM_LEDS_PER_BOARD];
};
-static int __devinit sunfire_led_generic_probe(struct platform_device *pdev,
+static int sunfire_led_generic_probe(struct platform_device *pdev,
struct led_type *types)
{
struct sunfire_drvdata *p;
@@ -165,7 +165,7 @@
return 0;
}
-static int __devexit sunfire_led_generic_remove(struct platform_device *pdev)
+static int sunfire_led_generic_remove(struct platform_device *pdev)
{
struct sunfire_drvdata *p = dev_get_drvdata(&pdev->dev);
int i;
@@ -192,7 +192,7 @@
},
};
-static int __devinit sunfire_clockboard_led_probe(struct platform_device *pdev)
+static int sunfire_clockboard_led_probe(struct platform_device *pdev)
{
return sunfire_led_generic_probe(pdev, clockboard_led_types);
}
@@ -213,7 +213,7 @@
},
};
-static int __devinit sunfire_fhc_led_probe(struct platform_device *pdev)
+static int sunfire_fhc_led_probe(struct platform_device *pdev)
{
return sunfire_led_generic_probe(pdev, fhc_led_types);
}
@@ -223,7 +223,7 @@
static struct platform_driver sunfire_clockboard_led_driver = {
.probe = sunfire_clockboard_led_probe,
- .remove = __devexit_p(sunfire_led_generic_remove),
+ .remove = sunfire_led_generic_remove,
.driver = {
.name = "sunfire-clockboard-leds",
.owner = THIS_MODULE,
@@ -232,7 +232,7 @@
static struct platform_driver sunfire_fhc_led_driver = {
.probe = sunfire_fhc_led_probe,
- .remove = __devexit_p(sunfire_led_generic_remove),
+ .remove = sunfire_led_generic_remove,
.driver = {
.name = "sunfire-fhc-leds",
.owner = THIS_MODULE,
diff --git a/drivers/leds/leds-tca6507.c b/drivers/leds/leds-tca6507.c
index dabcf7a..b26a63b 100644
--- a/drivers/leds/leds-tca6507.c
+++ b/drivers/leds/leds-tca6507.c
@@ -667,7 +667,7 @@
}
#endif /* CONFIG_GPIOLIB */
-static int __devinit tca6507_probe(struct i2c_client *client,
+static int tca6507_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct tca6507_chip *tca;
@@ -730,7 +730,7 @@
return err;
}
-static int __devexit tca6507_remove(struct i2c_client *client)
+static int tca6507_remove(struct i2c_client *client)
{
int i;
struct tca6507_chip *tca = i2c_get_clientdata(client);
@@ -752,7 +752,7 @@
.owner = THIS_MODULE,
},
.probe = tca6507_probe,
- .remove = __devexit_p(tca6507_remove),
+ .remove = tca6507_remove,
.id_table = tca6507_id,
};
diff --git a/drivers/memstick/host/Kconfig b/drivers/memstick/host/Kconfig
index cc0997a..4f7a17f 100644
--- a/drivers/memstick/host/Kconfig
+++ b/drivers/memstick/host/Kconfig
@@ -42,3 +42,13 @@
To compile this driver as a module, choose M here: the module will
be called r592.
+
+config MEMSTICK_REALTEK_PCI
+ tristate "Realtek PCI-E Memstick Card Interface Driver"
+ depends on MFD_RTSX_PCI
+ help
+ Say Y here to include driver code to support Memstick card interface
+ of Realtek PCI-E card reader
+
+ To compile this driver as a module, choose M here: the module will
+ be called rtsx_pci_ms.
diff --git a/drivers/memstick/host/Makefile b/drivers/memstick/host/Makefile
index 31ba8d3..af3459d 100644
--- a/drivers/memstick/host/Makefile
+++ b/drivers/memstick/host/Makefile
@@ -5,3 +5,4 @@
obj-$(CONFIG_MEMSTICK_TIFM_MS) += tifm_ms.o
obj-$(CONFIG_MEMSTICK_JMICRON_38X) += jmb38x_ms.o
obj-$(CONFIG_MEMSTICK_R592) += r592.o
+obj-$(CONFIG_MEMSTICK_REALTEK_PCI) += rtsx_pci_ms.o
diff --git a/drivers/memstick/host/rtsx_pci_ms.c b/drivers/memstick/host/rtsx_pci_ms.c
new file mode 100644
index 0000000..f5ddb82
--- /dev/null
+++ b/drivers/memstick/host/rtsx_pci_ms.c
@@ -0,0 +1,641 @@
+/* Realtek PCI-Express Memstick Card Interface driver
+ *
+ * Copyright(c) 2009 Realtek Semiconductor Corp. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * Author:
+ * Wei WANG <wei_wang@realsil.com.cn>
+ * No. 450, Shenhu Road, Suzhou Industry Park, Suzhou, China
+ */
+
+#include <linux/module.h>
+#include <linux/highmem.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/memstick.h>
+#include <linux/mfd/rtsx_pci.h>
+#include <asm/unaligned.h>
+
+struct realtek_pci_ms {
+ struct platform_device *pdev;
+ struct rtsx_pcr *pcr;
+ struct memstick_host *msh;
+ struct memstick_request *req;
+
+ struct mutex host_mutex;
+ struct work_struct handle_req;
+
+ u8 ssc_depth;
+ unsigned int clock;
+ unsigned char ifmode;
+ bool eject;
+};
+
+static inline struct device *ms_dev(struct realtek_pci_ms *host)
+{
+ return &(host->pdev->dev);
+}
+
+static inline void ms_clear_error(struct realtek_pci_ms *host)
+{
+ rtsx_pci_write_register(host->pcr, CARD_STOP,
+ MS_STOP | MS_CLR_ERR, MS_STOP | MS_CLR_ERR);
+}
+
+#ifdef DEBUG
+
+static void ms_print_debug_regs(struct realtek_pci_ms *host)
+{
+ struct rtsx_pcr *pcr = host->pcr;
+ u16 i;
+ u8 *ptr;
+
+ /* Print MS host internal registers */
+ rtsx_pci_init_cmd(pcr);
+ for (i = 0xFD40; i <= 0xFD44; i++)
+ rtsx_pci_add_cmd(pcr, READ_REG_CMD, i, 0, 0);
+ for (i = 0xFD52; i <= 0xFD69; i++)
+ rtsx_pci_add_cmd(pcr, READ_REG_CMD, i, 0, 0);
+ rtsx_pci_send_cmd(pcr, 100);
+
+ ptr = rtsx_pci_get_cmd_data(pcr);
+ for (i = 0xFD40; i <= 0xFD44; i++)
+ dev_dbg(ms_dev(host), "0x%04X: 0x%02x\n", i, *(ptr++));
+ for (i = 0xFD52; i <= 0xFD69; i++)
+ dev_dbg(ms_dev(host), "0x%04X: 0x%02x\n", i, *(ptr++));
+}
+
+#else
+
+#define ms_print_debug_regs(host)
+
+#endif
+
+static int ms_power_on(struct realtek_pci_ms *host)
+{
+ struct rtsx_pcr *pcr = host->pcr;
+ int err;
+
+ rtsx_pci_init_cmd(pcr);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_SELECT, 0x07, MS_MOD_SEL);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_SHARE_MODE,
+ CARD_SHARE_MASK, CARD_SHARE_48_MS);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_CLK_EN,
+ MS_CLK_EN, MS_CLK_EN);
+ err = rtsx_pci_send_cmd(pcr, 100);
+ if (err < 0)
+ return err;
+
+ err = rtsx_pci_card_pull_ctl_enable(pcr, RTSX_MS_CARD);
+ if (err < 0)
+ return err;
+
+ err = rtsx_pci_card_power_on(pcr, RTSX_MS_CARD);
+ if (err < 0)
+ return err;
+
+ /* Wait ms power stable */
+ msleep(150);
+
+ err = rtsx_pci_write_register(pcr, CARD_OE,
+ MS_OUTPUT_EN, MS_OUTPUT_EN);
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+
+static int ms_power_off(struct realtek_pci_ms *host)
+{
+ struct rtsx_pcr *pcr = host->pcr;
+ int err;
+
+ rtsx_pci_init_cmd(pcr);
+
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_CLK_EN, MS_CLK_EN, 0);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_OE, MS_OUTPUT_EN, 0);
+
+ err = rtsx_pci_send_cmd(pcr, 100);
+ if (err < 0)
+ return err;
+
+ err = rtsx_pci_card_power_off(pcr, RTSX_MS_CARD);
+ if (err < 0)
+ return err;
+
+ return rtsx_pci_card_pull_ctl_disable(pcr, RTSX_MS_CARD);
+}
+
+static int ms_transfer_data(struct realtek_pci_ms *host, unsigned char data_dir,
+ u8 tpc, u8 cfg, struct scatterlist *sg)
+{
+ struct rtsx_pcr *pcr = host->pcr;
+ int err;
+ unsigned int length = sg->length;
+ u16 sec_cnt = (u16)(length / 512);
+ u8 val, trans_mode, dma_dir;
+
+ dev_dbg(ms_dev(host), "%s: tpc = 0x%02x, data_dir = %s, length = %d\n",
+ __func__, tpc, (data_dir == READ) ? "READ" : "WRITE",
+ length);
+
+ if (data_dir == READ) {
+ dma_dir = DMA_DIR_FROM_CARD;
+ trans_mode = MS_TM_AUTO_READ;
+ } else {
+ dma_dir = DMA_DIR_TO_CARD;
+ trans_mode = MS_TM_AUTO_WRITE;
+ }
+
+ rtsx_pci_init_cmd(pcr);
+
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, MS_TPC, 0xFF, tpc);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, MS_SECTOR_CNT_H,
+ 0xFF, (u8)(sec_cnt >> 8));
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, MS_SECTOR_CNT_L,
+ 0xFF, (u8)sec_cnt);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, MS_TRANS_CFG, 0xFF, cfg);
+
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, IRQSTAT0,
+ DMA_DONE_INT, DMA_DONE_INT);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, DMATC3, 0xFF, (u8)(length >> 24));
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, DMATC2, 0xFF, (u8)(length >> 16));
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, DMATC1, 0xFF, (u8)(length >> 8));
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, DMATC0, 0xFF, (u8)length);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, DMACTL,
+ 0x03 | DMA_PACK_SIZE_MASK, dma_dir | DMA_EN | DMA_512);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_DATA_SOURCE,
+ 0x01, RING_BUFFER);
+
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, MS_TRANSFER,
+ 0xFF, MS_TRANSFER_START | trans_mode);
+ rtsx_pci_add_cmd(pcr, CHECK_REG_CMD, MS_TRANSFER,
+ MS_TRANSFER_END, MS_TRANSFER_END);
+
+ rtsx_pci_send_cmd_no_wait(pcr);
+
+ err = rtsx_pci_transfer_data(pcr, sg, 1, data_dir == READ, 10000);
+ if (err < 0) {
+ ms_clear_error(host);
+ return err;
+ }
+
+ rtsx_pci_read_register(pcr, MS_TRANS_CFG, &val);
+ if (val & (MS_INT_CMDNK | MS_INT_ERR | MS_CRC16_ERR | MS_RDY_TIMEOUT))
+ return -EIO;
+
+ return 0;
+}
+
+static int ms_write_bytes(struct realtek_pci_ms *host, u8 tpc,
+ u8 cfg, u8 cnt, u8 *data, u8 *int_reg)
+{
+ struct rtsx_pcr *pcr = host->pcr;
+ int err, i;
+
+ dev_dbg(ms_dev(host), "%s: tpc = 0x%02x\n", __func__, tpc);
+
+ if (!data)
+ return -EINVAL;
+
+ rtsx_pci_init_cmd(pcr);
+
+ for (i = 0; i < cnt; i++)
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD,
+ PPBUF_BASE2 + i, 0xFF, data[i]);
+ if (cnt % 2)
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD,
+ PPBUF_BASE2 + i, 0xFF, 0xFF);
+
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, MS_TPC, 0xFF, tpc);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, MS_BYTE_CNT, 0xFF, cnt);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, MS_TRANS_CFG, 0xFF, cfg);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_DATA_SOURCE,
+ 0x01, PINGPONG_BUFFER);
+
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, MS_TRANSFER,
+ 0xFF, MS_TRANSFER_START | MS_TM_WRITE_BYTES);
+ rtsx_pci_add_cmd(pcr, CHECK_REG_CMD, MS_TRANSFER,
+ MS_TRANSFER_END, MS_TRANSFER_END);
+ if (int_reg)
+ rtsx_pci_add_cmd(pcr, READ_REG_CMD, MS_TRANS_CFG, 0, 0);
+
+ err = rtsx_pci_send_cmd(pcr, 5000);
+ if (err < 0) {
+ u8 val;
+
+ rtsx_pci_read_register(pcr, MS_TRANS_CFG, &val);
+ dev_dbg(ms_dev(host), "MS_TRANS_CFG: 0x%02x\n", val);
+
+ if (int_reg)
+ *int_reg = val & 0x0F;
+
+ ms_print_debug_regs(host);
+
+ ms_clear_error(host);
+
+ if (!(tpc & 0x08)) {
+ if (val & MS_CRC16_ERR)
+ return -EIO;
+ } else {
+ if (!(val & 0x80)) {
+ if (val & (MS_INT_ERR | MS_INT_CMDNK))
+ return -EIO;
+ }
+ }
+
+ return -ETIMEDOUT;
+ }
+
+ if (int_reg) {
+ u8 *ptr = rtsx_pci_get_cmd_data(pcr) + 1;
+ *int_reg = *ptr & 0x0F;
+ }
+
+ return 0;
+}
+
+static int ms_read_bytes(struct realtek_pci_ms *host, u8 tpc,
+ u8 cfg, u8 cnt, u8 *data, u8 *int_reg)
+{
+ struct rtsx_pcr *pcr = host->pcr;
+ int err, i;
+ u8 *ptr;
+
+ dev_dbg(ms_dev(host), "%s: tpc = 0x%02x\n", __func__, tpc);
+
+ if (!data)
+ return -EINVAL;
+
+ rtsx_pci_init_cmd(pcr);
+
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, MS_TPC, 0xFF, tpc);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, MS_BYTE_CNT, 0xFF, cnt);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, MS_TRANS_CFG, 0xFF, cfg);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_DATA_SOURCE,
+ 0x01, PINGPONG_BUFFER);
+
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, MS_TRANSFER,
+ 0xFF, MS_TRANSFER_START | MS_TM_READ_BYTES);
+ rtsx_pci_add_cmd(pcr, CHECK_REG_CMD, MS_TRANSFER,
+ MS_TRANSFER_END, MS_TRANSFER_END);
+ for (i = 0; i < cnt - 1; i++)
+ rtsx_pci_add_cmd(pcr, READ_REG_CMD, PPBUF_BASE2 + i, 0, 0);
+ if (cnt % 2)
+ rtsx_pci_add_cmd(pcr, READ_REG_CMD, PPBUF_BASE2 + cnt, 0, 0);
+ else
+ rtsx_pci_add_cmd(pcr, READ_REG_CMD,
+ PPBUF_BASE2 + cnt - 1, 0, 0);
+ if (int_reg)
+ rtsx_pci_add_cmd(pcr, READ_REG_CMD, MS_TRANS_CFG, 0, 0);
+
+ err = rtsx_pci_send_cmd(pcr, 5000);
+ if (err < 0) {
+ u8 val;
+
+ rtsx_pci_read_register(pcr, MS_TRANS_CFG, &val);
+ dev_dbg(ms_dev(host), "MS_TRANS_CFG: 0x%02x\n", val);
+
+ if (int_reg)
+ *int_reg = val & 0x0F;
+
+ ms_print_debug_regs(host);
+
+ ms_clear_error(host);
+
+ if (!(tpc & 0x08)) {
+ if (val & MS_CRC16_ERR)
+ return -EIO;
+ } else {
+ if (!(val & 0x80)) {
+ if (val & (MS_INT_ERR | MS_INT_CMDNK))
+ return -EIO;
+ }
+ }
+
+ return -ETIMEDOUT;
+ }
+
+ ptr = rtsx_pci_get_cmd_data(pcr) + 1;
+ for (i = 0; i < cnt; i++)
+ data[i] = *ptr++;
+
+ if (int_reg)
+ *int_reg = *ptr & 0x0F;
+
+ return 0;
+}
+
+static int rtsx_pci_ms_issue_cmd(struct realtek_pci_ms *host)
+{
+ struct memstick_request *req = host->req;
+ int err = 0;
+ u8 cfg = 0, int_reg;
+
+ dev_dbg(ms_dev(host), "%s\n", __func__);
+
+ if (req->need_card_int) {
+ if (host->ifmode != MEMSTICK_SERIAL)
+ cfg = WAIT_INT;
+ }
+
+ if (req->long_data) {
+ err = ms_transfer_data(host, req->data_dir,
+ req->tpc, cfg, &(req->sg));
+ } else {
+ if (req->data_dir == READ) {
+ err = ms_read_bytes(host, req->tpc, cfg,
+ req->data_len, req->data, &int_reg);
+ } else {
+ err = ms_write_bytes(host, req->tpc, cfg,
+ req->data_len, req->data, &int_reg);
+ }
+ }
+ if (err < 0)
+ return err;
+
+ if (req->need_card_int && (host->ifmode == MEMSTICK_SERIAL)) {
+ err = ms_read_bytes(host, MS_TPC_GET_INT,
+ NO_WAIT_INT, 1, &int_reg, NULL);
+ if (err < 0)
+ return err;
+ }
+
+ if (req->need_card_int) {
+ dev_dbg(ms_dev(host), "int_reg: 0x%02x\n", int_reg);
+
+ if (int_reg & MS_INT_CMDNK)
+ req->int_reg |= MEMSTICK_INT_CMDNAK;
+ if (int_reg & MS_INT_BREQ)
+ req->int_reg |= MEMSTICK_INT_BREQ;
+ if (int_reg & MS_INT_ERR)
+ req->int_reg |= MEMSTICK_INT_ERR;
+ if (int_reg & MS_INT_CED)
+ req->int_reg |= MEMSTICK_INT_CED;
+ }
+
+ return 0;
+}
+
+static void rtsx_pci_ms_handle_req(struct work_struct *work)
+{
+ struct realtek_pci_ms *host = container_of(work,
+ struct realtek_pci_ms, handle_req);
+ struct rtsx_pcr *pcr = host->pcr;
+ struct memstick_host *msh = host->msh;
+ int rc;
+
+ mutex_lock(&pcr->pcr_mutex);
+
+ rtsx_pci_start_run(pcr);
+
+ rtsx_pci_switch_clock(host->pcr, host->clock, host->ssc_depth,
+ false, true, false);
+ rtsx_pci_write_register(pcr, CARD_SELECT, 0x07, MS_MOD_SEL);
+ rtsx_pci_write_register(pcr, CARD_SHARE_MODE,
+ CARD_SHARE_MASK, CARD_SHARE_48_MS);
+
+ if (!host->req) {
+ do {
+ rc = memstick_next_req(msh, &host->req);
+ dev_dbg(ms_dev(host), "next req %d\n", rc);
+
+ if (!rc)
+ host->req->error = rtsx_pci_ms_issue_cmd(host);
+ } while (!rc);
+ }
+
+ mutex_unlock(&pcr->pcr_mutex);
+}
+
+static void rtsx_pci_ms_request(struct memstick_host *msh)
+{
+ struct realtek_pci_ms *host = memstick_priv(msh);
+
+ dev_dbg(ms_dev(host), "--> %s\n", __func__);
+
+ schedule_work(&host->handle_req);
+}
+
+static int rtsx_pci_ms_set_param(struct memstick_host *msh,
+ enum memstick_param param, int value)
+{
+ struct realtek_pci_ms *host = memstick_priv(msh);
+ struct rtsx_pcr *pcr = host->pcr;
+ unsigned int clock = 0;
+ u8 ssc_depth = 0;
+ int err;
+
+ dev_dbg(ms_dev(host), "%s: param = %d, value = %d\n",
+ __func__, param, value);
+
+ switch (param) {
+ case MEMSTICK_POWER:
+ if (value == MEMSTICK_POWER_ON)
+ err = ms_power_on(host);
+ else if (value == MEMSTICK_POWER_OFF)
+ err = ms_power_off(host);
+ else
+ return -EINVAL;
+ break;
+
+ case MEMSTICK_INTERFACE:
+ if (value == MEMSTICK_SERIAL) {
+ clock = 19000000;
+ ssc_depth = RTSX_SSC_DEPTH_500K;
+
+ err = rtsx_pci_write_register(pcr, MS_CFG,
+ 0x18, MS_BUS_WIDTH_1);
+ if (err < 0)
+ return err;
+ } else if (value == MEMSTICK_PAR4) {
+ clock = 39000000;
+ ssc_depth = RTSX_SSC_DEPTH_1M;
+
+ err = rtsx_pci_write_register(pcr, MS_CFG,
+ 0x58, MS_BUS_WIDTH_4 | PUSH_TIME_ODD);
+ if (err < 0)
+ return err;
+ } else {
+ return -EINVAL;
+ }
+
+ err = rtsx_pci_switch_clock(pcr, clock,
+ ssc_depth, false, true, false);
+ if (err < 0)
+ return err;
+
+ host->ssc_depth = ssc_depth;
+ host->clock = clock;
+ host->ifmode = value;
+ break;
+ }
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+
+static int rtsx_pci_ms_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ struct realtek_pci_ms *host = platform_get_drvdata(pdev);
+ struct memstick_host *msh = host->msh;
+
+ dev_dbg(ms_dev(host), "--> %s\n", __func__);
+
+ memstick_suspend_host(msh);
+ return 0;
+}
+
+static int rtsx_pci_ms_resume(struct platform_device *pdev)
+{
+ struct realtek_pci_ms *host = platform_get_drvdata(pdev);
+ struct memstick_host *msh = host->msh;
+
+ dev_dbg(ms_dev(host), "--> %s\n", __func__);
+
+ memstick_resume_host(msh);
+ return 0;
+}
+
+#else /* CONFIG_PM */
+
+#define rtsx_pci_ms_suspend NULL
+#define rtsx_pci_ms_resume NULL
+
+#endif /* CONFIG_PM */
+
+static void rtsx_pci_ms_card_event(struct platform_device *pdev)
+{
+ struct realtek_pci_ms *host = platform_get_drvdata(pdev);
+
+ memstick_detect_change(host->msh);
+}
+
+static int rtsx_pci_ms_drv_probe(struct platform_device *pdev)
+{
+ struct memstick_host *msh;
+ struct realtek_pci_ms *host;
+ struct rtsx_pcr *pcr;
+ struct pcr_handle *handle = pdev->dev.platform_data;
+ int rc;
+
+ if (!handle)
+ return -ENXIO;
+
+ pcr = handle->pcr;
+ if (!pcr)
+ return -ENXIO;
+
+ dev_dbg(&(pdev->dev),
+ ": Realtek PCI-E Memstick controller found\n");
+
+ msh = memstick_alloc_host(sizeof(*host), &pdev->dev);
+ if (!msh)
+ return -ENOMEM;
+
+ host = memstick_priv(msh);
+ host->pcr = pcr;
+ host->msh = msh;
+ host->pdev = pdev;
+ platform_set_drvdata(pdev, host);
+ pcr->slots[RTSX_MS_CARD].p_dev = pdev;
+ pcr->slots[RTSX_MS_CARD].card_event = rtsx_pci_ms_card_event;
+
+ mutex_init(&host->host_mutex);
+
+ INIT_WORK(&host->handle_req, rtsx_pci_ms_handle_req);
+ msh->request = rtsx_pci_ms_request;
+ msh->set_param = rtsx_pci_ms_set_param;
+ msh->caps = MEMSTICK_CAP_PAR4;
+
+ rc = memstick_add_host(msh);
+ if (rc) {
+ memstick_free_host(msh);
+ return rc;
+ }
+
+ return 0;
+}
+
+static int rtsx_pci_ms_drv_remove(struct platform_device *pdev)
+{
+ struct realtek_pci_ms *host = platform_get_drvdata(pdev);
+ struct rtsx_pcr *pcr;
+ struct memstick_host *msh;
+ int rc;
+
+ if (!host)
+ return 0;
+
+ pcr = host->pcr;
+ pcr->slots[RTSX_MS_CARD].p_dev = NULL;
+ pcr->slots[RTSX_MS_CARD].card_event = NULL;
+ msh = host->msh;
+ host->eject = true;
+
+ mutex_lock(&host->host_mutex);
+ if (host->req) {
+ dev_dbg(&(pdev->dev),
+ "%s: Controller removed during transfer\n",
+ dev_name(&msh->dev));
+
+ rtsx_pci_complete_unfinished_transfer(pcr);
+
+ host->req->error = -ENOMEDIUM;
+ do {
+ rc = memstick_next_req(msh, &host->req);
+ if (!rc)
+ host->req->error = -ENOMEDIUM;
+ } while (!rc);
+ }
+ mutex_unlock(&host->host_mutex);
+
+ memstick_remove_host(msh);
+ memstick_free_host(msh);
+
+ platform_set_drvdata(pdev, NULL);
+
+ dev_dbg(&(pdev->dev),
+ ": Realtek PCI-E Memstick controller has been removed\n");
+
+ return 0;
+}
+
+static struct platform_device_id rtsx_pci_ms_ids[] = {
+ {
+ .name = DRV_NAME_RTSX_PCI_MS,
+ }, {
+ /* sentinel */
+ }
+};
+MODULE_DEVICE_TABLE(platform, rtsx_pci_ms_ids);
+
+static struct platform_driver rtsx_pci_ms_driver = {
+ .probe = rtsx_pci_ms_drv_probe,
+ .remove = rtsx_pci_ms_drv_remove,
+ .id_table = rtsx_pci_ms_ids,
+ .suspend = rtsx_pci_ms_suspend,
+ .resume = rtsx_pci_ms_resume,
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = DRV_NAME_RTSX_PCI_MS,
+ },
+};
+module_platform_driver(rtsx_pci_ms_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Wei WANG <wei_wang@realsil.com.cn>");
+MODULE_DESCRIPTION("Realtek PCI-E Memstick Card Host Driver");
diff --git a/drivers/mfd/88pm800.c b/drivers/mfd/88pm800.c
index ce229ea..391e23e 100644
--- a/drivers/mfd/88pm800.c
+++ b/drivers/mfd/88pm800.c
@@ -248,7 +248,7 @@
},
};
-static int __devinit device_gpadc_init(struct pm80x_chip *chip,
+static int device_gpadc_init(struct pm80x_chip *chip,
struct pm80x_platform_data *pdata)
{
struct pm80x_subchip *subchip = chip->subchip;
@@ -315,7 +315,7 @@
return ret;
}
-static int __devinit device_irq_init_800(struct pm80x_chip *chip)
+static int device_irq_init_800(struct pm80x_chip *chip)
{
struct regmap *map = chip->regmap;
unsigned long flags = IRQF_TRIGGER_FALLING | IRQF_ONESHOT;
@@ -415,7 +415,7 @@
}
}
-static int __devinit device_800_init(struct pm80x_chip *chip,
+static int device_800_init(struct pm80x_chip *chip,
struct pm80x_platform_data *pdata)
{
int ret, pmic_id;
@@ -499,7 +499,7 @@
return ret;
}
-static int __devinit pm800_probe(struct i2c_client *client,
+static int pm800_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
int ret = 0;
@@ -554,7 +554,7 @@
return ret;
}
-static int __devexit pm800_remove(struct i2c_client *client)
+static int pm800_remove(struct i2c_client *client)
{
struct pm80x_chip *chip = i2c_get_clientdata(client);
@@ -576,7 +576,7 @@
.pm = &pm80x_pm_ops,
},
.probe = pm800_probe,
- .remove = __devexit_p(pm800_remove),
+ .remove = pm800_remove,
.id_table = pm80x_id_table,
};
diff --git a/drivers/mfd/88pm805.c b/drivers/mfd/88pm805.c
index c20a311..e671230 100644
--- a/drivers/mfd/88pm805.c
+++ b/drivers/mfd/88pm805.c
@@ -135,7 +135,7 @@
},
};
-static int __devinit device_irq_init_805(struct pm80x_chip *chip)
+static int device_irq_init_805(struct pm80x_chip *chip)
{
struct regmap *map = chip->regmap;
unsigned long flags = IRQF_TRIGGER_FALLING | IRQF_ONESHOT;
@@ -189,7 +189,7 @@
.ack_base = PM805_INT_STATUS1,
};
-static int __devinit device_805_init(struct pm80x_chip *chip)
+static int device_805_init(struct pm80x_chip *chip)
{
int ret = 0;
unsigned int val;
@@ -232,7 +232,7 @@
return ret;
}
-static int __devinit pm805_probe(struct i2c_client *client,
+static int pm805_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
int ret = 0;
@@ -262,7 +262,7 @@
return ret;
}
-static int __devexit pm805_remove(struct i2c_client *client)
+static int pm805_remove(struct i2c_client *client)
{
struct pm80x_chip *chip = i2c_get_clientdata(client);
@@ -281,7 +281,7 @@
.pm = &pm80x_pm_ops,
},
.probe = pm805_probe,
- .remove = __devexit_p(pm805_remove),
+ .remove = pm805_remove,
.id_table = pm80x_id_table,
};
diff --git a/drivers/mfd/88pm80x.c b/drivers/mfd/88pm80x.c
index cd0bf52..1adb355 100644
--- a/drivers/mfd/88pm80x.c
+++ b/drivers/mfd/88pm80x.c
@@ -31,7 +31,7 @@
};
EXPORT_SYMBOL_GPL(pm80x_regmap_config);
-int __devinit pm80x_init(struct i2c_client *client,
+int pm80x_init(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct pm80x_chip *chip;
diff --git a/drivers/mfd/88pm860x-core.c b/drivers/mfd/88pm860x-core.c
index 8fa86ed..893fc1b 100644
--- a/drivers/mfd/88pm860x-core.c
+++ b/drivers/mfd/88pm860x-core.c
@@ -28,111 +28,111 @@
#define INT_STATUS_NUM 3
-static struct resource bk0_resources[] __devinitdata = {
+static struct resource bk0_resources[] = {
{2, 2, "duty cycle", IORESOURCE_REG, },
{3, 3, "always on", IORESOURCE_REG, },
{3, 3, "current", IORESOURCE_REG, },
};
-static struct resource bk1_resources[] __devinitdata = {
+static struct resource bk1_resources[] = {
{4, 4, "duty cycle", IORESOURCE_REG, },
{5, 5, "always on", IORESOURCE_REG, },
{5, 5, "current", IORESOURCE_REG, },
};
-static struct resource bk2_resources[] __devinitdata = {
+static struct resource bk2_resources[] = {
{6, 6, "duty cycle", IORESOURCE_REG, },
{7, 7, "always on", IORESOURCE_REG, },
{5, 5, "current", IORESOURCE_REG, },
};
-static struct resource led0_resources[] __devinitdata = {
+static struct resource led0_resources[] = {
/* RGB1 Red LED */
{0xd, 0xd, "control", IORESOURCE_REG, },
{0xc, 0xc, "blink", IORESOURCE_REG, },
};
-static struct resource led1_resources[] __devinitdata = {
+static struct resource led1_resources[] = {
/* RGB1 Green LED */
{0xe, 0xe, "control", IORESOURCE_REG, },
{0xc, 0xc, "blink", IORESOURCE_REG, },
};
-static struct resource led2_resources[] __devinitdata = {
+static struct resource led2_resources[] = {
/* RGB1 Blue LED */
{0xf, 0xf, "control", IORESOURCE_REG, },
{0xc, 0xc, "blink", IORESOURCE_REG, },
};
-static struct resource led3_resources[] __devinitdata = {
+static struct resource led3_resources[] = {
/* RGB2 Red LED */
{0x9, 0x9, "control", IORESOURCE_REG, },
{0x8, 0x8, "blink", IORESOURCE_REG, },
};
-static struct resource led4_resources[] __devinitdata = {
+static struct resource led4_resources[] = {
/* RGB2 Green LED */
{0xa, 0xa, "control", IORESOURCE_REG, },
{0x8, 0x8, "blink", IORESOURCE_REG, },
};
-static struct resource led5_resources[] __devinitdata = {
+static struct resource led5_resources[] = {
/* RGB2 Blue LED */
{0xb, 0xb, "control", IORESOURCE_REG, },
{0x8, 0x8, "blink", IORESOURCE_REG, },
};
-static struct resource buck1_resources[] __devinitdata = {
+static struct resource buck1_resources[] = {
{0x24, 0x24, "buck set", IORESOURCE_REG, },
};
-static struct resource buck2_resources[] __devinitdata = {
+static struct resource buck2_resources[] = {
{0x25, 0x25, "buck set", IORESOURCE_REG, },
};
-static struct resource buck3_resources[] __devinitdata = {
+static struct resource buck3_resources[] = {
{0x26, 0x26, "buck set", IORESOURCE_REG, },
};
-static struct resource ldo1_resources[] __devinitdata = {
+static struct resource ldo1_resources[] = {
{0x10, 0x10, "ldo set", IORESOURCE_REG, },
};
-static struct resource ldo2_resources[] __devinitdata = {
+static struct resource ldo2_resources[] = {
{0x11, 0x11, "ldo set", IORESOURCE_REG, },
};
-static struct resource ldo3_resources[] __devinitdata = {
+static struct resource ldo3_resources[] = {
{0x12, 0x12, "ldo set", IORESOURCE_REG, },
};
-static struct resource ldo4_resources[] __devinitdata = {
+static struct resource ldo4_resources[] = {
{0x13, 0x13, "ldo set", IORESOURCE_REG, },
};
-static struct resource ldo5_resources[] __devinitdata = {
+static struct resource ldo5_resources[] = {
{0x14, 0x14, "ldo set", IORESOURCE_REG, },
};
-static struct resource ldo6_resources[] __devinitdata = {
+static struct resource ldo6_resources[] = {
{0x15, 0x15, "ldo set", IORESOURCE_REG, },
};
-static struct resource ldo7_resources[] __devinitdata = {
+static struct resource ldo7_resources[] = {
{0x16, 0x16, "ldo set", IORESOURCE_REG, },
};
-static struct resource ldo8_resources[] __devinitdata = {
+static struct resource ldo8_resources[] = {
{0x17, 0x17, "ldo set", IORESOURCE_REG, },
};
-static struct resource ldo9_resources[] __devinitdata = {
+static struct resource ldo9_resources[] = {
{0x18, 0x18, "ldo set", IORESOURCE_REG, },
};
-static struct resource ldo10_resources[] __devinitdata = {
+static struct resource ldo10_resources[] = {
{0x19, 0x19, "ldo set", IORESOURCE_REG, },
};
-static struct resource ldo12_resources[] __devinitdata = {
+static struct resource ldo12_resources[] = {
{0x1a, 0x1a, "ldo set", IORESOURCE_REG, },
};
-static struct resource ldo_vibrator_resources[] __devinitdata = {
+static struct resource ldo_vibrator_resources[] = {
{0x28, 0x28, "ldo set", IORESOURCE_REG, },
};
-static struct resource ldo14_resources[] __devinitdata = {
+static struct resource ldo14_resources[] = {
{0x1b, 0x1b, "ldo set", IORESOURCE_REG, },
};
-static struct resource touch_resources[] __devinitdata = {
+static struct resource touch_resources[] = {
{PM8607_IRQ_PEN, PM8607_IRQ_PEN, "touch", IORESOURCE_IRQ,},
};
-static struct resource onkey_resources[] __devinitdata = {
+static struct resource onkey_resources[] = {
{PM8607_IRQ_ONKEY, PM8607_IRQ_ONKEY, "onkey", IORESOURCE_IRQ,},
};
-static struct resource codec_resources[] __devinitdata = {
+static struct resource codec_resources[] = {
/* Headset microphone insertion or removal */
{PM8607_IRQ_MICIN, PM8607_IRQ_MICIN, "micin", IORESOURCE_IRQ,},
/* Hook-switch press or release */
@@ -143,12 +143,12 @@
{PM8607_IRQ_AUDIO_SHORT, PM8607_IRQ_AUDIO_SHORT, "audio-short", IORESOURCE_IRQ,},
};
-static struct resource battery_resources[] __devinitdata = {
+static struct resource battery_resources[] = {
{PM8607_IRQ_CC, PM8607_IRQ_CC, "columb counter", IORESOURCE_IRQ,},
{PM8607_IRQ_BAT, PM8607_IRQ_BAT, "battery", IORESOURCE_IRQ,},
};
-static struct resource charger_resources[] __devinitdata = {
+static struct resource charger_resources[] = {
{PM8607_IRQ_CHG, PM8607_IRQ_CHG, "charger detect", IORESOURCE_IRQ,},
{PM8607_IRQ_CHG_DONE, PM8607_IRQ_CHG_DONE, "charging done", IORESOURCE_IRQ,},
{PM8607_IRQ_CHG_FAIL, PM8607_IRQ_CHG_FAIL, "charging timeout", IORESOURCE_IRQ,},
@@ -158,11 +158,11 @@
{PM8607_IRQ_VCHG, PM8607_IRQ_VCHG, "vchg voltage", IORESOURCE_IRQ,},
};
-static struct resource rtc_resources[] __devinitdata = {
+static struct resource rtc_resources[] = {
{PM8607_IRQ_RTC, PM8607_IRQ_RTC, "rtc", IORESOURCE_IRQ,},
};
-static struct mfd_cell bk_devs[] __devinitdata = {
+static struct mfd_cell bk_devs[] = {
{
.name = "88pm860x-backlight",
.id = 0,
@@ -181,7 +181,7 @@
},
};
-static struct mfd_cell led_devs[] __devinitdata = {
+static struct mfd_cell led_devs[] = {
{
.name = "88pm860x-led",
.id = 0,
@@ -215,7 +215,7 @@
},
};
-static struct mfd_cell reg_devs[] __devinitdata = {
+static struct mfd_cell reg_devs[] = {
{
.name = "88pm860x-regulator",
.id = 0,
@@ -565,7 +565,7 @@
.xlate = irq_domain_xlate_onetwocell,
};
-static int __devinit device_irq_init(struct pm860x_chip *chip,
+static int device_irq_init(struct pm860x_chip *chip,
struct pm860x_platform_data *pdata)
{
struct i2c_client *i2c = (chip->id == CHIP_PM8607) ? chip->client \
@@ -730,7 +730,7 @@
}
EXPORT_SYMBOL(pm8606_osc_disable);
-static void __devinit device_osc_init(struct i2c_client *i2c)
+static void device_osc_init(struct i2c_client *i2c)
{
struct pm860x_chip *chip = i2c_get_clientdata(i2c);
@@ -745,7 +745,7 @@
chip->osc_status = PM8606_REF_GP_OSC_OFF;
}
-static void __devinit device_bk_init(struct pm860x_chip *chip,
+static void device_bk_init(struct pm860x_chip *chip,
struct pm860x_platform_data *pdata)
{
int ret, i;
@@ -765,7 +765,7 @@
dev_err(chip->dev, "Failed to add backlight subdev\n");
}
-static void __devinit device_led_init(struct pm860x_chip *chip,
+static void device_led_init(struct pm860x_chip *chip,
struct pm860x_platform_data *pdata)
{
int ret, i;
@@ -787,7 +787,7 @@
}
}
-static void __devinit device_regulator_init(struct pm860x_chip *chip,
+static void device_regulator_init(struct pm860x_chip *chip,
struct pm860x_platform_data *pdata)
{
int ret;
@@ -866,7 +866,7 @@
}
}
-static void __devinit device_rtc_init(struct pm860x_chip *chip,
+static void device_rtc_init(struct pm860x_chip *chip,
struct pm860x_platform_data *pdata)
{
int ret;
@@ -885,7 +885,7 @@
dev_err(chip->dev, "Failed to add rtc subdev\n");
}
-static void __devinit device_touch_init(struct pm860x_chip *chip,
+static void device_touch_init(struct pm860x_chip *chip,
struct pm860x_platform_data *pdata)
{
int ret;
@@ -904,7 +904,7 @@
dev_err(chip->dev, "Failed to add touch subdev\n");
}
-static void __devinit device_power_init(struct pm860x_chip *chip,
+static void device_power_init(struct pm860x_chip *chip,
struct pm860x_platform_data *pdata)
{
int ret;
@@ -951,7 +951,7 @@
}
}
-static void __devinit device_onkey_init(struct pm860x_chip *chip,
+static void device_onkey_init(struct pm860x_chip *chip,
struct pm860x_platform_data *pdata)
{
int ret;
@@ -965,7 +965,7 @@
dev_err(chip->dev, "Failed to add onkey subdev\n");
}
-static void __devinit device_codec_init(struct pm860x_chip *chip,
+static void device_codec_init(struct pm860x_chip *chip,
struct pm860x_platform_data *pdata)
{
int ret;
@@ -979,7 +979,7 @@
dev_err(chip->dev, "Failed to add codec subdev\n");
}
-static void __devinit device_8607_init(struct pm860x_chip *chip,
+static void device_8607_init(struct pm860x_chip *chip,
struct i2c_client *i2c,
struct pm860x_platform_data *pdata)
{
@@ -1040,7 +1040,7 @@
return;
}
-static void __devinit device_8606_init(struct pm860x_chip *chip,
+static void device_8606_init(struct pm860x_chip *chip,
struct i2c_client *i2c,
struct pm860x_platform_data *pdata)
{
@@ -1049,7 +1049,7 @@
device_led_init(chip, pdata);
}
-static int __devinit pm860x_device_init(struct pm860x_chip *chip,
+static int pm860x_device_init(struct pm860x_chip *chip,
struct pm860x_platform_data *pdata)
{
chip->core_irq = 0;
@@ -1077,7 +1077,7 @@
return 0;
}
-static void __devexit pm860x_device_exit(struct pm860x_chip *chip)
+static void pm860x_device_exit(struct pm860x_chip *chip)
{
device_irq_exit(chip);
mfd_remove_devices(chip->dev);
@@ -1109,7 +1109,7 @@
.val_bits = 8,
};
-static int __devinit pm860x_dt_init(struct device_node *np,
+static int pm860x_dt_init(struct device_node *np,
struct device *dev,
struct pm860x_platform_data *pdata)
{
@@ -1127,7 +1127,7 @@
return 0;
}
-static int __devinit pm860x_probe(struct i2c_client *client,
+static int pm860x_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct pm860x_platform_data *pdata = client->dev.platform_data;
@@ -1200,7 +1200,7 @@
return ret;
}
-static int __devexit pm860x_remove(struct i2c_client *client)
+static int pm860x_remove(struct i2c_client *client)
{
struct pm860x_chip *chip = i2c_get_clientdata(client);
@@ -1258,7 +1258,7 @@
.of_match_table = of_match_ptr(pm860x_dt_ids),
},
.probe = pm860x_probe,
- .remove = __devexit_p(pm860x_remove),
+ .remove = pm860x_remove,
.id_table = pm860x_id_table,
};
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index acab3ef..2c10938 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -63,6 +63,16 @@
lines on the SM501. The platform data is used to supply the
base number for the first GPIO line to register.
+config MFD_RTSX_PCI
+ tristate "Support for Realtek PCI-E card reader"
+ depends on PCI
+ select MFD_CORE
+ help
+ This supports for Realtek PCI-Express card reader including rts5209,
+ rts5229, rtl8411, etc. Realtek card reader supports access to many
+ types of memory cards, such as Memory Stick, Memory Stick Pro,
+ Secure Digital and MultiMediaCard.
+
config MFD_ASIC3
bool "Support for Compaq ASIC3"
depends on GENERIC_HARDIRQS && GPIOLIB && ARM
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index d8ccb63..b53db06 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -9,6 +9,9 @@
obj-$(CONFIG_MFD_SM501) += sm501.o
obj-$(CONFIG_MFD_ASIC3) += asic3.o tmio_core.o
+rtsx_pci-objs := rtsx_pcr.o rts5209.o rts5229.o rtl8411.o
+obj-$(CONFIG_MFD_RTSX_PCI) += rtsx_pci.o
+
obj-$(CONFIG_HTC_EGPIO) += htc-egpio.o
obj-$(CONFIG_HTC_PASIC3) += htc-pasic3.o
obj-$(CONFIG_HTC_I2CPLD) += htc-i2cpld.o
diff --git a/drivers/mfd/ab3100-core.c b/drivers/mfd/ab3100-core.c
index 2b3dde5..2ec7725 100644
--- a/drivers/mfd/ab3100-core.c
+++ b/drivers/mfd/ab3100-core.c
@@ -661,8 +661,7 @@
u8 setting;
};
-static const struct ab3100_init_setting __devinitconst
-ab3100_init_settings[] = {
+static const struct ab3100_init_setting ab3100_init_settings[] = {
{
.abreg = AB3100_MCA,
.setting = 0x01
@@ -708,7 +707,7 @@
},
};
-static int __devinit ab3100_setup(struct ab3100 *ab3100)
+static int ab3100_setup(struct ab3100 *ab3100)
{
int err = 0;
int i;
@@ -803,7 +802,7 @@
char *name;
};
-static const struct ab_family_id ids[] __devinitconst = {
+static const struct ab_family_id ids[] = {
/* AB3100 */
{
.id = 0xc0,
@@ -857,7 +856,7 @@
},
};
-static int __devinit ab3100_probe(struct i2c_client *client,
+static int ab3100_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct ab3100 *ab3100;
@@ -962,7 +961,7 @@
return err;
}
-static int __devexit ab3100_remove(struct i2c_client *client)
+static int ab3100_remove(struct i2c_client *client)
{
struct ab3100 *ab3100 = i2c_get_clientdata(client);
@@ -986,7 +985,7 @@
},
.id_table = ab3100_id,
.probe = ab3100_probe,
- .remove = __devexit_p(ab3100_remove),
+ .remove = ab3100_remove,
};
static int __init ab3100_i2c_init(void)
diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c
index 1667c77..127b00a 100644
--- a/drivers/mfd/ab8500-core.c
+++ b/drivers/mfd/ab8500-core.c
@@ -623,7 +623,7 @@
}
};
-static struct resource __devinitdata ab8500_gpadc_resources[] = {
+static struct resource ab8500_gpadc_resources[] = {
{
.name = "HW_CONV_END",
.start = AB8500_INT_GP_HW_ADC_CONV_END,
@@ -638,7 +638,7 @@
},
};
-static struct resource __devinitdata ab8500_rtc_resources[] = {
+static struct resource ab8500_rtc_resources[] = {
{
.name = "60S",
.start = AB8500_INT_RTC_60S,
@@ -653,7 +653,7 @@
},
};
-static struct resource __devinitdata ab8500_poweronkey_db_resources[] = {
+static struct resource ab8500_poweronkey_db_resources[] = {
{
.name = "ONKEY_DBF",
.start = AB8500_INT_PON_KEY1DB_F,
@@ -668,7 +668,7 @@
},
};
-static struct resource __devinitdata ab8500_av_acc_detect_resources[] = {
+static struct resource ab8500_av_acc_detect_resources[] = {
{
.name = "ACC_DETECT_1DB_F",
.start = AB8500_INT_ACC_DETECT_1DB_F,
@@ -707,7 +707,7 @@
},
};
-static struct resource __devinitdata ab8500_charger_resources[] = {
+static struct resource ab8500_charger_resources[] = {
{
.name = "MAIN_CH_UNPLUG_DET",
.start = AB8500_INT_MAIN_CH_UNPLUG_DET,
@@ -788,7 +788,7 @@
},
};
-static struct resource __devinitdata ab8500_btemp_resources[] = {
+static struct resource ab8500_btemp_resources[] = {
{
.name = "BAT_CTRL_INDB",
.start = AB8500_INT_BAT_CTRL_INDB,
@@ -821,7 +821,7 @@
},
};
-static struct resource __devinitdata ab8500_fg_resources[] = {
+static struct resource ab8500_fg_resources[] = {
{
.name = "NCONV_ACCU",
.start = AB8500_INT_CCN_CONV_ACC,
@@ -860,10 +860,10 @@
},
};
-static struct resource __devinitdata ab8500_chargalg_resources[] = {};
+static struct resource ab8500_chargalg_resources[] = {};
#ifdef CONFIG_DEBUG_FS
-static struct resource __devinitdata ab8500_debug_resources[] = {
+static struct resource ab8500_debug_resources[] = {
{
.name = "IRQ_FIRST",
.start = AB8500_INT_MAIN_EXT_CH_NOT_OK,
@@ -879,7 +879,7 @@
};
#endif
-static struct resource __devinitdata ab8500_usb_resources[] = {
+static struct resource ab8500_usb_resources[] = {
{
.name = "ID_WAKEUP_R",
.start = AB8500_INT_ID_WAKEUP_R,
@@ -924,7 +924,7 @@
},
};
-static struct resource __devinitdata ab8505_iddet_resources[] = {
+static struct resource ab8505_iddet_resources[] = {
{
.name = "KeyDeglitch",
.start = AB8505_INT_KEYDEGLITCH,
@@ -957,7 +957,7 @@
},
};
-static struct resource __devinitdata ab8500_temp_resources[] = {
+static struct resource ab8500_temp_resources[] = {
{
.name = "AB8500_TEMP_WARM",
.start = AB8500_INT_TEMP_WARM,
@@ -966,7 +966,7 @@
},
};
-static struct mfd_cell __devinitdata abx500_common_devs[] = {
+static struct mfd_cell abx500_common_devs[] = {
#ifdef CONFIG_DEBUG_FS
{
.name = "ab8500-debug",
@@ -1038,7 +1038,7 @@
},
};
-static struct mfd_cell __devinitdata ab8500_bm_devs[] = {
+static struct mfd_cell ab8500_bm_devs[] = {
{
.name = "ab8500-charger",
.num_resources = ARRAY_SIZE(ab8500_charger_resources),
@@ -1061,7 +1061,7 @@
},
};
-static struct mfd_cell __devinitdata ab8500_devs[] = {
+static struct mfd_cell ab8500_devs[] = {
{
.name = "ab8500-gpio",
.of_compatible = "stericsson,ab8500-gpio",
@@ -1080,7 +1080,7 @@
},
};
-static struct mfd_cell __devinitdata ab9540_devs[] = {
+static struct mfd_cell ab9540_devs[] = {
{
.name = "ab8500-gpio",
.num_resources = ARRAY_SIZE(ab9540_gpio_resources),
@@ -1097,7 +1097,7 @@
};
/* Device list common to ab9540 and ab8505 */
-static struct mfd_cell __devinitdata ab9540_ab8505_devs[] = {
+static struct mfd_cell ab9540_ab8505_devs[] = {
{
.name = "ab-iddet",
.num_resources = ARRAY_SIZE(ab8505_iddet_resources),
@@ -1248,7 +1248,7 @@
.attrs = ab9540_sysfs_entries,
};
-static int __devinit ab8500_probe(struct platform_device *pdev)
+static int ab8500_probe(struct platform_device *pdev)
{
static char *switch_off_status[] = {
"Swoff bit programming",
@@ -1473,7 +1473,7 @@
return ret;
}
-static int __devexit ab8500_remove(struct platform_device *pdev)
+static int ab8500_remove(struct platform_device *pdev)
{
struct ab8500 *ab8500 = platform_get_drvdata(pdev);
@@ -1506,7 +1506,7 @@
.owner = THIS_MODULE,
},
.probe = ab8500_probe,
- .remove = __devexit_p(ab8500_remove),
+ .remove = ab8500_remove,
.id_table = ab8500_id,
};
diff --git a/drivers/mfd/ab8500-debugfs.c b/drivers/mfd/ab8500-debugfs.c
index c4cb806..5a8e707 100644
--- a/drivers/mfd/ab8500-debugfs.c
+++ b/drivers/mfd/ab8500-debugfs.c
@@ -552,7 +552,7 @@
static struct dentry *ab8500_address_file;
static struct dentry *ab8500_val_file;
-static int __devinit ab8500_debug_probe(struct platform_device *plf)
+static int ab8500_debug_probe(struct platform_device *plf)
{
debug_bank = AB8500_MISC;
debug_address = AB8500_REV_REG & 0x00FF;
@@ -597,7 +597,7 @@
return -ENOMEM;
}
-static int __devexit ab8500_debug_remove(struct platform_device *plf)
+static int ab8500_debug_remove(struct platform_device *plf)
{
debugfs_remove(ab8500_val_file);
debugfs_remove(ab8500_address_file);
@@ -614,7 +614,7 @@
.owner = THIS_MODULE,
},
.probe = ab8500_debug_probe,
- .remove = __devexit_p(ab8500_debug_remove)
+ .remove = ab8500_debug_remove
};
static int __init ab8500_debug_init(void)
diff --git a/drivers/mfd/ab8500-gpadc.c b/drivers/mfd/ab8500-gpadc.c
index 29d72a2..3fb1f40d 100644
--- a/drivers/mfd/ab8500-gpadc.c
+++ b/drivers/mfd/ab8500-gpadc.c
@@ -571,7 +571,7 @@
gpadc->cal_data[ADC_INPUT_VBAT].offset);
}
-static int __devinit ab8500_gpadc_probe(struct platform_device *pdev)
+static int ab8500_gpadc_probe(struct platform_device *pdev)
{
int ret = 0;
struct ab8500_gpadc *gpadc;
@@ -634,7 +634,7 @@
return ret;
}
-static int __devexit ab8500_gpadc_remove(struct platform_device *pdev)
+static int ab8500_gpadc_remove(struct platform_device *pdev)
{
struct ab8500_gpadc *gpadc = platform_get_drvdata(pdev);
@@ -651,7 +651,7 @@
static struct platform_driver ab8500_gpadc_driver = {
.probe = ab8500_gpadc_probe,
- .remove = __devexit_p(ab8500_gpadc_remove),
+ .remove = ab8500_gpadc_remove,
.driver = {
.name = "ab8500-gpadc",
.owner = THIS_MODULE,
diff --git a/drivers/mfd/ab8500-sysctrl.c b/drivers/mfd/ab8500-sysctrl.c
index c28d4eb1..8a33b2c 100644
--- a/drivers/mfd/ab8500-sysctrl.c
+++ b/drivers/mfd/ab8500-sysctrl.c
@@ -49,13 +49,13 @@
(u8)(reg & 0xFF), mask, value);
}
-static int __devinit ab8500_sysctrl_probe(struct platform_device *pdev)
+static int ab8500_sysctrl_probe(struct platform_device *pdev)
{
sysctrl_dev = &pdev->dev;
return 0;
}
-static int __devexit ab8500_sysctrl_remove(struct platform_device *pdev)
+static int ab8500_sysctrl_remove(struct platform_device *pdev)
{
sysctrl_dev = NULL;
return 0;
@@ -67,7 +67,7 @@
.owner = THIS_MODULE,
},
.probe = ab8500_sysctrl_probe,
- .remove = __devexit_p(ab8500_sysctrl_remove),
+ .remove = ab8500_sysctrl_remove,
};
static int __init ab8500_sysctrl_init(void)
diff --git a/drivers/mfd/adp5520.c b/drivers/mfd/adp5520.c
index ea8b947..210dd03 100644
--- a/drivers/mfd/adp5520.c
+++ b/drivers/mfd/adp5520.c
@@ -203,7 +203,7 @@
return device_for_each_child(chip->dev, NULL, __remove_subdev);
}
-static int __devinit adp5520_probe(struct i2c_client *client,
+static int adp5520_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct adp5520_platform_data *pdata = client->dev.platform_data;
@@ -307,7 +307,7 @@
return ret;
}
-static int __devexit adp5520_remove(struct i2c_client *client)
+static int adp5520_remove(struct i2c_client *client)
{
struct adp5520_chip *chip = dev_get_drvdata(&client->dev);
@@ -356,7 +356,7 @@
.pm = &adp5520_pm,
},
.probe = adp5520_probe,
- .remove = __devexit_p(adp5520_remove),
+ .remove = adp5520_remove,
.id_table = adp5520_id,
};
diff --git a/drivers/mfd/arizona-core.c b/drivers/mfd/arizona-core.c
index f4f9bf8..1a6f943f 100644
--- a/drivers/mfd/arizona-core.c
+++ b/drivers/mfd/arizona-core.c
@@ -285,7 +285,7 @@
{ .name = "wm5110-codec" },
};
-int __devinit arizona_dev_init(struct arizona *arizona)
+int arizona_dev_init(struct arizona *arizona)
{
struct device *dev = arizona->dev;
const char *type_name;
@@ -561,7 +561,7 @@
}
EXPORT_SYMBOL_GPL(arizona_dev_init);
-int __devexit arizona_dev_exit(struct arizona *arizona)
+int arizona_dev_exit(struct arizona *arizona)
{
mfd_remove_devices(arizona->dev);
arizona_free_irq(arizona, ARIZONA_IRQ_UNDERCLOCKED, arizona);
diff --git a/drivers/mfd/arizona-i2c.c b/drivers/mfd/arizona-i2c.c
index 570c4b4..44a1bb9 100644
--- a/drivers/mfd/arizona-i2c.c
+++ b/drivers/mfd/arizona-i2c.c
@@ -22,7 +22,7 @@
#include "arizona.h"
-static __devinit int arizona_i2c_probe(struct i2c_client *i2c,
+static int arizona_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
struct arizona *arizona;
@@ -65,7 +65,7 @@
return arizona_dev_init(arizona);
}
-static int __devexit arizona_i2c_remove(struct i2c_client *i2c)
+static int arizona_i2c_remove(struct i2c_client *i2c)
{
struct arizona *arizona = dev_get_drvdata(&i2c->dev);
arizona_dev_exit(arizona);
@@ -86,7 +86,7 @@
.pm = &arizona_pm_ops,
},
.probe = arizona_i2c_probe,
- .remove = __devexit_p(arizona_i2c_remove),
+ .remove = arizona_i2c_remove,
.id_table = arizona_i2c_id,
};
diff --git a/drivers/mfd/arizona-spi.c b/drivers/mfd/arizona-spi.c
index df2e5a8..1b9fdd6 100644
--- a/drivers/mfd/arizona-spi.c
+++ b/drivers/mfd/arizona-spi.c
@@ -22,7 +22,7 @@
#include "arizona.h"
-static int __devinit arizona_spi_probe(struct spi_device *spi)
+static int arizona_spi_probe(struct spi_device *spi)
{
const struct spi_device_id *id = spi_get_device_id(spi);
struct arizona *arizona;
@@ -65,7 +65,7 @@
return arizona_dev_init(arizona);
}
-static int __devexit arizona_spi_remove(struct spi_device *spi)
+static int arizona_spi_remove(struct spi_device *spi)
{
struct arizona *arizona = dev_get_drvdata(&spi->dev);
arizona_dev_exit(arizona);
@@ -86,7 +86,7 @@
.pm = &arizona_pm_ops,
},
.probe = arizona_spi_probe,
- .remove = __devexit_p(arizona_spi_remove),
+ .remove = arizona_spi_remove,
.id_table = arizona_spi_ids,
};
diff --git a/drivers/mfd/asic3.c b/drivers/mfd/asic3.c
index 62f0883..1b15986 100644
--- a/drivers/mfd/asic3.c
+++ b/drivers/mfd/asic3.c
@@ -1039,7 +1039,7 @@
return ret;
}
-static int __devexit asic3_remove(struct platform_device *pdev)
+static int asic3_remove(struct platform_device *pdev)
{
int ret;
struct asic3 *asic = platform_get_drvdata(pdev);
@@ -1071,7 +1071,7 @@
.driver = {
.name = "asic3",
},
- .remove = __devexit_p(asic3_remove),
+ .remove = asic3_remove,
.shutdown = asic3_shutdown,
};
diff --git a/drivers/mfd/cs5535-mfd.c b/drivers/mfd/cs5535-mfd.c
index 2b28213..2e4752a 100644
--- a/drivers/mfd/cs5535-mfd.c
+++ b/drivers/mfd/cs5535-mfd.c
@@ -71,9 +71,9 @@
return 0;
}
-static __devinitdata struct resource cs5535_mfd_resources[NR_BARS];
+static struct resource cs5535_mfd_resources[NR_BARS];
-static __devinitdata struct mfd_cell cs5535_mfd_cells[] = {
+static struct mfd_cell cs5535_mfd_cells[] = {
{
.id = SMB_BAR,
.name = "cs5535-smb",
@@ -113,7 +113,7 @@
};
#ifdef CONFIG_OLPC
-static void __devinit cs5535_clone_olpc_cells(void)
+static void cs5535_clone_olpc_cells(void)
{
const char *acpi_clones[] = { "olpc-xo1-pm-acpi", "olpc-xo1-sci-acpi" };
@@ -126,7 +126,7 @@
static void cs5535_clone_olpc_cells(void) { }
#endif
-static int __devinit cs5535_mfd_probe(struct pci_dev *pdev,
+static int cs5535_mfd_probe(struct pci_dev *pdev,
const struct pci_device_id *id)
{
int err, i;
@@ -166,7 +166,7 @@
return err;
}
-static void __devexit cs5535_mfd_remove(struct pci_dev *pdev)
+static void cs5535_mfd_remove(struct pci_dev *pdev)
{
mfd_remove_devices(&pdev->dev);
pci_disable_device(pdev);
@@ -183,7 +183,7 @@
.name = DRV_NAME,
.id_table = cs5535_mfd_pci_tbl,
.probe = cs5535_mfd_probe,
- .remove = __devexit_p(cs5535_mfd_remove),
+ .remove = cs5535_mfd_remove,
};
module_pci_driver(cs5535_mfd_driver);
diff --git a/drivers/mfd/da903x.c b/drivers/mfd/da903x.c
index 1924b85..05176cd 100644
--- a/drivers/mfd/da903x.c
+++ b/drivers/mfd/da903x.c
@@ -246,7 +246,7 @@
}
EXPORT_SYMBOL(da903x_query_status);
-static int __devinit da9030_init_chip(struct da903x_chip *chip)
+static int da9030_init_chip(struct da903x_chip *chip)
{
uint8_t chip_id;
int err;
@@ -459,7 +459,7 @@
return device_for_each_child(chip->dev, NULL, __remove_subdev);
}
-static int __devinit da903x_add_subdevs(struct da903x_chip *chip,
+static int da903x_add_subdevs(struct da903x_chip *chip,
struct da903x_platform_data *pdata)
{
struct da903x_subdev_info *subdev;
@@ -491,7 +491,7 @@
return ret;
}
-static int __devinit da903x_probe(struct i2c_client *client,
+static int da903x_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct da903x_platform_data *pdata = client->dev.platform_data;
@@ -544,7 +544,7 @@
return ret;
}
-static int __devexit da903x_remove(struct i2c_client *client)
+static int da903x_remove(struct i2c_client *client)
{
struct da903x_chip *chip = i2c_get_clientdata(client);
@@ -560,7 +560,7 @@
.owner = THIS_MODULE,
},
.probe = da903x_probe,
- .remove = __devexit_p(da903x_remove),
+ .remove = da903x_remove,
.id_table = da903x_id_table,
};
diff --git a/drivers/mfd/da9052-core.c b/drivers/mfd/da9052-core.c
index a0a62b2..689b747 100644
--- a/drivers/mfd/da9052-core.c
+++ b/drivers/mfd/da9052-core.c
@@ -515,7 +515,7 @@
},
};
-static struct mfd_cell __devinitdata da9052_subdev_info[] = {
+static struct mfd_cell da9052_subdev_info[] = {
{
.name = "da9052-regulator",
.id = 1,
@@ -769,7 +769,7 @@
};
EXPORT_SYMBOL_GPL(da9052_regmap_config);
-int __devinit da9052_device_init(struct da9052 *da9052, u8 chip_id)
+int da9052_device_init(struct da9052 *da9052, u8 chip_id)
{
struct da9052_pdata *pdata = da9052->dev->platform_data;
int ret;
diff --git a/drivers/mfd/da9052-i2c.c b/drivers/mfd/da9052-i2c.c
index 352c58b..ac74a4d 100644
--- a/drivers/mfd/da9052-i2c.c
+++ b/drivers/mfd/da9052-i2c.c
@@ -64,7 +64,7 @@
};
#endif
-static int __devinit da9052_i2c_probe(struct i2c_client *client,
+static int da9052_i2c_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct da9052 *da9052;
@@ -121,7 +121,7 @@
return 0;
}
-static int __devexit da9052_i2c_remove(struct i2c_client *client)
+static int da9052_i2c_remove(struct i2c_client *client)
{
struct da9052 *da9052 = i2c_get_clientdata(client);
@@ -131,7 +131,7 @@
static struct i2c_driver da9052_i2c_driver = {
.probe = da9052_i2c_probe,
- .remove = __devexit_p(da9052_i2c_remove),
+ .remove = da9052_i2c_remove,
.id_table = da9052_i2c_id,
.driver = {
.name = "da9052",
diff --git a/drivers/mfd/da9052-spi.c b/drivers/mfd/da9052-spi.c
index dbeadc5..61d63b9 100644
--- a/drivers/mfd/da9052-spi.c
+++ b/drivers/mfd/da9052-spi.c
@@ -21,7 +21,7 @@
#include <linux/mfd/da9052/da9052.h>
-static int __devinit da9052_spi_probe(struct spi_device *spi)
+static int da9052_spi_probe(struct spi_device *spi)
{
int ret;
const struct spi_device_id *id = spi_get_device_id(spi);
@@ -58,7 +58,7 @@
return 0;
}
-static int __devexit da9052_spi_remove(struct spi_device *spi)
+static int da9052_spi_remove(struct spi_device *spi)
{
struct da9052 *da9052 = dev_get_drvdata(&spi->dev);
@@ -76,7 +76,7 @@
static struct spi_driver da9052_spi_driver = {
.probe = da9052_spi_probe,
- .remove = __devexit_p(da9052_spi_remove),
+ .remove = da9052_spi_remove,
.id_table = da9052_spi_id,
.driver = {
.name = "da9052",
diff --git a/drivers/mfd/da9055-core.c b/drivers/mfd/da9055-core.c
index ff6c77f3..f56a1a9 100644
--- a/drivers/mfd/da9055-core.c
+++ b/drivers/mfd/da9055-core.c
@@ -377,7 +377,7 @@
.num_irqs = ARRAY_SIZE(da9055_irqs),
};
-int __devinit da9055_device_init(struct da9055 *da9055)
+int da9055_device_init(struct da9055 *da9055)
{
struct da9055_pdata *pdata = da9055->dev->platform_data;
int ret;
@@ -412,7 +412,7 @@
return ret;
}
-void __devexit da9055_device_exit(struct da9055 *da9055)
+void da9055_device_exit(struct da9055 *da9055)
{
regmap_del_irq_chip(da9055->chip_irq, da9055->irq_data);
mfd_remove_devices(da9055->dev);
diff --git a/drivers/mfd/da9055-i2c.c b/drivers/mfd/da9055-i2c.c
index 88f6dca..607387f 100644
--- a/drivers/mfd/da9055-i2c.c
+++ b/drivers/mfd/da9055-i2c.c
@@ -18,7 +18,7 @@
#include <linux/mfd/da9055/core.h>
-static int __devinit da9055_i2c_probe(struct i2c_client *i2c,
+static int da9055_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
struct da9055 *da9055;
@@ -44,7 +44,7 @@
return da9055_device_init(da9055);
}
-static int __devexit da9055_i2c_remove(struct i2c_client *i2c)
+static int da9055_i2c_remove(struct i2c_client *i2c)
{
struct da9055 *da9055 = i2c_get_clientdata(i2c);
@@ -60,7 +60,7 @@
static struct i2c_driver da9055_i2c_driver = {
.probe = da9055_i2c_probe,
- .remove = __devexit_p(da9055_i2c_remove),
+ .remove = da9055_i2c_remove,
.id_table = da9055_i2c_id,
.driver = {
.name = "da9055",
diff --git a/drivers/mfd/davinci_voicecodec.c b/drivers/mfd/davinci_voicecodec.c
index 45e83a6..c0bcc87 100644
--- a/drivers/mfd/davinci_voicecodec.c
+++ b/drivers/mfd/davinci_voicecodec.c
@@ -151,7 +151,7 @@
return ret;
}
-static int __devexit davinci_vc_remove(struct platform_device *pdev)
+static int davinci_vc_remove(struct platform_device *pdev)
{
struct davinci_vc *davinci_vc = platform_get_drvdata(pdev);
@@ -174,7 +174,7 @@
.name = "davinci_voicecodec",
.owner = THIS_MODULE,
},
- .remove = __devexit_p(davinci_vc_remove),
+ .remove = davinci_vc_remove,
};
static int __init davinci_vc_init(void)
diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c
index b96661d..dc56915 100644
--- a/drivers/mfd/db8500-prcmu.c
+++ b/drivers/mfd/db8500-prcmu.c
@@ -3088,7 +3088,7 @@
* prcmu_fw_init - arch init call for the Linux PRCMU fw init logic
*
*/
-static int __devinit db8500_prcmu_probe(struct platform_device *pdev)
+static int db8500_prcmu_probe(struct platform_device *pdev)
{
struct ab8500_platform_data *ab8500_platdata = pdev->dev.platform_data;
struct device_node *np = pdev->dev.of_node;
diff --git a/drivers/mfd/ezx-pcap.c b/drivers/mfd/ezx-pcap.c
index db662e2..b7a61f0 100644
--- a/drivers/mfd/ezx-pcap.c
+++ b/drivers/mfd/ezx-pcap.c
@@ -371,7 +371,7 @@
return 0;
}
-static int __devinit pcap_add_subdev(struct pcap_chip *pcap,
+static int pcap_add_subdev(struct pcap_chip *pcap,
struct pcap_subdev *subdev)
{
struct platform_device *pdev;
@@ -391,7 +391,7 @@
return ret;
}
-static int __devexit ezx_pcap_remove(struct spi_device *spi)
+static int ezx_pcap_remove(struct spi_device *spi)
{
struct pcap_chip *pcap = dev_get_drvdata(&spi->dev);
struct pcap_platform_data *pdata = spi->dev.platform_data;
@@ -420,7 +420,7 @@
return 0;
}
-static int __devinit ezx_pcap_probe(struct spi_device *spi)
+static int ezx_pcap_probe(struct spi_device *spi)
{
struct pcap_platform_data *pdata = spi->dev.platform_data;
struct pcap_chip *pcap;
@@ -525,7 +525,7 @@
static struct spi_driver ezxpcap_driver = {
.probe = ezx_pcap_probe,
- .remove = __devexit_p(ezx_pcap_remove),
+ .remove = ezx_pcap_remove,
.driver = {
.name = "ezx-pcap",
.owner = THIS_MODULE,
diff --git a/drivers/mfd/htc-i2cpld.c b/drivers/mfd/htc-i2cpld.c
index d55065c..324187c 100644
--- a/drivers/mfd/htc-i2cpld.c
+++ b/drivers/mfd/htc-i2cpld.c
@@ -327,7 +327,7 @@
client, (chip_data->cache_out = chip_data->reset));
}
-static int __devinit htcpld_setup_chip_irq(
+static int htcpld_setup_chip_irq(
struct platform_device *pdev,
int chip_index)
{
@@ -361,7 +361,7 @@
return ret;
}
-static int __devinit htcpld_register_chip_i2c(
+static int htcpld_register_chip_i2c(
struct platform_device *pdev,
int chip_index)
{
@@ -419,7 +419,7 @@
return 0;
}
-static void __devinit htcpld_unregister_chip_i2c(
+static void htcpld_unregister_chip_i2c(
struct platform_device *pdev,
int chip_index)
{
@@ -434,7 +434,7 @@
i2c_unregister_device(chip->client);
}
-static int __devinit htcpld_register_chip_gpio(
+static int htcpld_register_chip_gpio(
struct platform_device *pdev,
int chip_index)
{
@@ -501,7 +501,7 @@
return 0;
}
-static int __devinit htcpld_setup_chips(struct platform_device *pdev)
+static int htcpld_setup_chips(struct platform_device *pdev)
{
struct htcpld_data *htcpld;
struct device *dev = &pdev->dev;
@@ -563,7 +563,7 @@
return 0;
}
-static int __devinit htcpld_core_probe(struct platform_device *pdev)
+static int htcpld_core_probe(struct platform_device *pdev)
{
struct htcpld_data *htcpld;
struct device *dev = &pdev->dev;
diff --git a/drivers/mfd/intel_msic.c b/drivers/mfd/intel_msic.c
index 266bdc5b..ab8d0b2 100644
--- a/drivers/mfd/intel_msic.c
+++ b/drivers/mfd/intel_msic.c
@@ -306,7 +306,7 @@
}
EXPORT_SYMBOL_GPL(intel_msic_irq_read);
-static int __devinit intel_msic_init_devices(struct intel_msic *msic)
+static int intel_msic_init_devices(struct intel_msic *msic)
{
struct platform_device *pdev = msic->pdev;
struct intel_msic_platform_data *pdata = pdev->dev.platform_data;
@@ -364,7 +364,7 @@
return ret;
}
-static void __devexit intel_msic_remove_devices(struct intel_msic *msic)
+static void intel_msic_remove_devices(struct intel_msic *msic)
{
struct platform_device *pdev = msic->pdev;
struct intel_msic_platform_data *pdata = pdev->dev.platform_data;
@@ -375,7 +375,7 @@
gpio_free(pdata->ocd->gpio);
}
-static int __devinit intel_msic_probe(struct platform_device *pdev)
+static int intel_msic_probe(struct platform_device *pdev)
{
struct intel_msic_platform_data *pdata = pdev->dev.platform_data;
struct intel_msic *msic;
@@ -445,7 +445,7 @@
return 0;
}
-static int __devexit intel_msic_remove(struct platform_device *pdev)
+static int intel_msic_remove(struct platform_device *pdev)
{
struct intel_msic *msic = platform_get_drvdata(pdev);
@@ -457,7 +457,7 @@
static struct platform_driver intel_msic_driver = {
.probe = intel_msic_probe,
- .remove = __devexit_p(intel_msic_remove),
+ .remove = intel_msic_remove,
.driver = {
.name = "intel_msic",
.owner = THIS_MODULE,
diff --git a/drivers/mfd/janz-cmodio.c b/drivers/mfd/janz-cmodio.c
index 965c480..45ece11 100644
--- a/drivers/mfd/janz-cmodio.c
+++ b/drivers/mfd/janz-cmodio.c
@@ -63,7 +63,7 @@
* Subdevices using the mfd-core API
*/
-static int __devinit cmodio_setup_subdevice(struct cmodio_device *priv,
+static int cmodio_setup_subdevice(struct cmodio_device *priv,
char *name, unsigned int devno,
unsigned int modno)
{
@@ -120,7 +120,7 @@
}
/* Probe each submodule using kernel parameters */
-static int __devinit cmodio_probe_submodules(struct cmodio_device *priv)
+static int cmodio_probe_submodules(struct cmodio_device *priv)
{
struct pci_dev *pdev = priv->pdev;
unsigned int num_probed = 0;
@@ -177,7 +177,7 @@
* PCI Driver
*/
-static int __devinit cmodio_pci_probe(struct pci_dev *dev,
+static int cmodio_pci_probe(struct pci_dev *dev,
const struct pci_device_id *id)
{
struct cmodio_device *priv;
@@ -254,7 +254,7 @@
return ret;
}
-static void __devexit cmodio_pci_remove(struct pci_dev *dev)
+static void cmodio_pci_remove(struct pci_dev *dev)
{
struct cmodio_device *priv = pci_get_drvdata(dev);
@@ -280,7 +280,7 @@
.name = DRV_NAME,
.id_table = cmodio_pci_ids,
.probe = cmodio_pci_probe,
- .remove = __devexit_p(cmodio_pci_remove),
+ .remove = cmodio_pci_remove,
};
module_pci_driver(cmodio_pci_driver);
diff --git a/drivers/mfd/jz4740-adc.c b/drivers/mfd/jz4740-adc.c
index c6b6d7d..0b8b55b 100644
--- a/drivers/mfd/jz4740-adc.c
+++ b/drivers/mfd/jz4740-adc.c
@@ -202,7 +202,7 @@
},
};
-static int __devinit jz4740_adc_probe(struct platform_device *pdev)
+static int jz4740_adc_probe(struct platform_device *pdev)
{
struct irq_chip_generic *gc;
struct irq_chip_type *ct;
@@ -307,7 +307,7 @@
return ret;
}
-static int __devexit jz4740_adc_remove(struct platform_device *pdev)
+static int jz4740_adc_remove(struct platform_device *pdev)
{
struct jz4740_adc *adc = platform_get_drvdata(pdev);
@@ -332,7 +332,7 @@
static struct platform_driver jz4740_adc_driver = {
.probe = jz4740_adc_probe,
- .remove = __devexit_p(jz4740_adc_remove),
+ .remove = jz4740_adc_remove,
.driver = {
.name = "jz4740-adc",
.owner = THIS_MODULE,
diff --git a/drivers/mfd/lm3533-core.c b/drivers/mfd/lm3533-core.c
index 24212f4..ceebf2c 100644
--- a/drivers/mfd/lm3533-core.c
+++ b/drivers/mfd/lm3533-core.c
@@ -382,7 +382,7 @@
.attrs = lm3533_attributes
};
-static int __devinit lm3533_device_als_init(struct lm3533 *lm3533)
+static int lm3533_device_als_init(struct lm3533 *lm3533)
{
struct lm3533_platform_data *pdata = lm3533->dev->platform_data;
int ret;
@@ -405,7 +405,7 @@
return 0;
}
-static int __devinit lm3533_device_bl_init(struct lm3533 *lm3533)
+static int lm3533_device_bl_init(struct lm3533 *lm3533)
{
struct lm3533_platform_data *pdata = lm3533->dev->platform_data;
int i;
@@ -434,7 +434,7 @@
return 0;
}
-static int __devinit lm3533_device_led_init(struct lm3533 *lm3533)
+static int lm3533_device_led_init(struct lm3533 *lm3533)
{
struct lm3533_platform_data *pdata = lm3533->dev->platform_data;
int i;
@@ -463,7 +463,7 @@
return 0;
}
-static int __devinit lm3533_device_setup(struct lm3533 *lm3533,
+static int lm3533_device_setup(struct lm3533 *lm3533,
struct lm3533_platform_data *pdata)
{
int ret;
@@ -479,7 +479,7 @@
return 0;
}
-static int __devinit lm3533_device_init(struct lm3533 *lm3533)
+static int lm3533_device_init(struct lm3533 *lm3533)
{
struct lm3533_platform_data *pdata = lm3533->dev->platform_data;
int ret;
@@ -534,7 +534,7 @@
return ret;
}
-static void __devexit lm3533_device_exit(struct lm3533 *lm3533)
+static void lm3533_device_exit(struct lm3533 *lm3533)
{
dev_dbg(lm3533->dev, "%s\n", __func__);
@@ -596,7 +596,7 @@
.precious_reg = lm3533_precious_register,
};
-static int __devinit lm3533_i2c_probe(struct i2c_client *i2c,
+static int lm3533_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
struct lm3533 *lm3533;
@@ -624,7 +624,7 @@
return 0;
}
-static int __devexit lm3533_i2c_remove(struct i2c_client *i2c)
+static int lm3533_i2c_remove(struct i2c_client *i2c)
{
struct lm3533 *lm3533 = i2c_get_clientdata(i2c);
@@ -648,7 +648,7 @@
},
.id_table = lm3533_i2c_ids,
.probe = lm3533_i2c_probe,
- .remove = __devexit_p(lm3533_i2c_remove),
+ .remove = lm3533_i2c_remove,
};
static int __init lm3533_i2c_init(void)
diff --git a/drivers/mfd/lp8788.c b/drivers/mfd/lp8788.c
index 3e94a69..c3d3c9b 100644
--- a/drivers/mfd/lp8788.c
+++ b/drivers/mfd/lp8788.c
@@ -203,7 +203,7 @@
ARRAY_SIZE(lp8788_devs), NULL, 0, NULL);
}
-static int __devexit lp8788_remove(struct i2c_client *cl)
+static int lp8788_remove(struct i2c_client *cl)
{
struct lp8788 *lp = i2c_get_clientdata(cl);
@@ -224,7 +224,7 @@
.owner = THIS_MODULE,
},
.probe = lp8788_probe,
- .remove = __devexit_p(lp8788_remove),
+ .remove = lp8788_remove,
.id_table = lp8788_ids,
};
diff --git a/drivers/mfd/lpc_ich.c b/drivers/mfd/lpc_ich.c
index a22544f..2ad24ca 100644
--- a/drivers/mfd/lpc_ich.c
+++ b/drivers/mfd/lpc_ich.c
@@ -196,7 +196,7 @@
LPC_LPT_LP, /* Lynx Point-LP */
};
-struct lpc_ich_info lpc_chipset_info[] __devinitdata = {
+struct lpc_ich_info lpc_chipset_info[] = {
[LPC_ICH] = {
.name = "ICH",
.iTCO_version = 1,
@@ -672,7 +672,7 @@
}
}
-static void __devinit lpc_ich_enable_acpi_space(struct pci_dev *dev)
+static void lpc_ich_enable_acpi_space(struct pci_dev *dev)
{
u8 reg_save;
@@ -681,7 +681,7 @@
lpc_ich_acpi_save = reg_save;
}
-static void __devinit lpc_ich_enable_gpio_space(struct pci_dev *dev)
+static void lpc_ich_enable_gpio_space(struct pci_dev *dev)
{
u8 reg_save;
@@ -690,7 +690,7 @@
lpc_ich_gpio_save = reg_save;
}
-static void __devinit lpc_ich_finalize_cell(struct mfd_cell *cell,
+static void lpc_ich_finalize_cell(struct mfd_cell *cell,
const struct pci_device_id *id)
{
cell->platform_data = &lpc_chipset_info[id->driver_data];
@@ -702,7 +702,7 @@
* GPIO groups and it's enough to have access to one of these to instantiate
* the device.
*/
-static int __devinit lpc_ich_check_conflict_gpio(struct resource *res)
+static int lpc_ich_check_conflict_gpio(struct resource *res)
{
int ret;
u8 use_gpio = 0;
@@ -721,7 +721,7 @@
return use_gpio ? use_gpio : ret;
}
-static int __devinit lpc_ich_init_gpio(struct pci_dev *dev,
+static int lpc_ich_init_gpio(struct pci_dev *dev,
const struct pci_device_id *id)
{
u32 base_addr_cfg;
@@ -798,7 +798,7 @@
return ret;
}
-static int __devinit lpc_ich_init_wdt(struct pci_dev *dev,
+static int lpc_ich_init_wdt(struct pci_dev *dev,
const struct pci_device_id *id)
{
u32 base_addr_cfg;
@@ -852,7 +852,7 @@
return ret;
}
-static int __devinit lpc_ich_probe(struct pci_dev *dev,
+static int lpc_ich_probe(struct pci_dev *dev,
const struct pci_device_id *id)
{
int ret;
@@ -878,7 +878,7 @@
return 0;
}
-static void __devexit lpc_ich_remove(struct pci_dev *dev)
+static void lpc_ich_remove(struct pci_dev *dev)
{
mfd_remove_devices(&dev->dev);
lpc_ich_restore_config_space(dev);
@@ -888,7 +888,7 @@
.name = "lpc_ich",
.id_table = lpc_ich_ids,
.probe = lpc_ich_probe,
- .remove = __devexit_p(lpc_ich_remove),
+ .remove = lpc_ich_remove,
};
static int __init lpc_ich_init(void)
diff --git a/drivers/mfd/lpc_sch.c b/drivers/mfd/lpc_sch.c
index f6b9c5c..5624fcb 100644
--- a/drivers/mfd/lpc_sch.c
+++ b/drivers/mfd/lpc_sch.c
@@ -83,7 +83,7 @@
};
MODULE_DEVICE_TABLE(pci, lpc_sch_ids);
-static int __devinit lpc_sch_probe(struct pci_dev *dev,
+static int lpc_sch_probe(struct pci_dev *dev,
const struct pci_device_id *id)
{
unsigned int base_addr_cfg;
@@ -164,7 +164,7 @@
return ret;
}
-static void __devexit lpc_sch_remove(struct pci_dev *dev)
+static void lpc_sch_remove(struct pci_dev *dev)
{
mfd_remove_devices(&dev->dev);
}
@@ -173,7 +173,7 @@
.name = "lpc_sch",
.id_table = lpc_sch_ids,
.probe = lpc_sch_probe,
- .remove = __devexit_p(lpc_sch_remove),
+ .remove = lpc_sch_remove,
};
module_pci_driver(lpc_sch_driver);
diff --git a/drivers/mfd/max77686.c b/drivers/mfd/max77686.c
index d9e24c8..f6878f8 100644
--- a/drivers/mfd/max77686.c
+++ b/drivers/mfd/max77686.c
@@ -45,7 +45,7 @@
};
#ifdef CONFIG_OF
-static struct of_device_id __devinitdata max77686_pmic_dt_match[] = {
+static struct of_device_id max77686_pmic_dt_match[] = {
{.compatible = "maxim,max77686", .data = 0},
{},
};
diff --git a/drivers/mfd/max8907.c b/drivers/mfd/max8907.c
index 17f2593..e9b1c93 100644
--- a/drivers/mfd/max8907.c
+++ b/drivers/mfd/max8907.c
@@ -183,7 +183,7 @@
MAX8907_MASK_POWER_OFF, MAX8907_MASK_POWER_OFF);
}
-static __devinit int max8907_i2c_probe(struct i2c_client *i2c,
+static int max8907_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
struct max8907 *max8907;
@@ -288,7 +288,7 @@
return ret;
}
-static __devexit int max8907_i2c_remove(struct i2c_client *i2c)
+static int max8907_i2c_remove(struct i2c_client *i2c)
{
struct max8907 *max8907 = i2c_get_clientdata(i2c);
diff --git a/drivers/mfd/max8925-core.c b/drivers/mfd/max8925-core.c
index 9f54c04..e32466e 100644
--- a/drivers/mfd/max8925-core.c
+++ b/drivers/mfd/max8925-core.c
@@ -19,12 +19,12 @@
#include <linux/mfd/core.h>
#include <linux/mfd/max8925.h>
-static struct resource bk_resources[] __devinitdata = {
+static struct resource bk_resources[] = {
{ 0x84, 0x84, "mode control", IORESOURCE_REG, },
{ 0x85, 0x85, "control", IORESOURCE_REG, },
};
-static struct mfd_cell bk_devs[] __devinitdata = {
+static struct mfd_cell bk_devs[] = {
{
.name = "max8925-backlight",
.num_resources = ARRAY_SIZE(bk_resources),
@@ -110,99 +110,99 @@
},
};
-static struct resource sd1_resources[] __devinitdata = {
+static struct resource sd1_resources[] = {
{0x06, 0x06, "sdv", IORESOURCE_REG, },
};
-static struct resource sd2_resources[] __devinitdata = {
+static struct resource sd2_resources[] = {
{0x09, 0x09, "sdv", IORESOURCE_REG, },
};
-static struct resource sd3_resources[] __devinitdata = {
+static struct resource sd3_resources[] = {
{0x0c, 0x0c, "sdv", IORESOURCE_REG, },
};
-static struct resource ldo1_resources[] __devinitdata = {
+static struct resource ldo1_resources[] = {
{0x1a, 0x1a, "ldov", IORESOURCE_REG, },
};
-static struct resource ldo2_resources[] __devinitdata = {
+static struct resource ldo2_resources[] = {
{0x1e, 0x1e, "ldov", IORESOURCE_REG, },
};
-static struct resource ldo3_resources[] __devinitdata = {
+static struct resource ldo3_resources[] = {
{0x22, 0x22, "ldov", IORESOURCE_REG, },
};
-static struct resource ldo4_resources[] __devinitdata = {
+static struct resource ldo4_resources[] = {
{0x26, 0x26, "ldov", IORESOURCE_REG, },
};
-static struct resource ldo5_resources[] __devinitdata = {
+static struct resource ldo5_resources[] = {
{0x2a, 0x2a, "ldov", IORESOURCE_REG, },
};
-static struct resource ldo6_resources[] __devinitdata = {
+static struct resource ldo6_resources[] = {
{0x2e, 0x2e, "ldov", IORESOURCE_REG, },
};
-static struct resource ldo7_resources[] __devinitdata = {
+static struct resource ldo7_resources[] = {
{0x32, 0x32, "ldov", IORESOURCE_REG, },
};
-static struct resource ldo8_resources[] __devinitdata = {
+static struct resource ldo8_resources[] = {
{0x36, 0x36, "ldov", IORESOURCE_REG, },
};
-static struct resource ldo9_resources[] __devinitdata = {
+static struct resource ldo9_resources[] = {
{0x3a, 0x3a, "ldov", IORESOURCE_REG, },
};
-static struct resource ldo10_resources[] __devinitdata = {
+static struct resource ldo10_resources[] = {
{0x3e, 0x3e, "ldov", IORESOURCE_REG, },
};
-static struct resource ldo11_resources[] __devinitdata = {
+static struct resource ldo11_resources[] = {
{0x42, 0x42, "ldov", IORESOURCE_REG, },
};
-static struct resource ldo12_resources[] __devinitdata = {
+static struct resource ldo12_resources[] = {
{0x46, 0x46, "ldov", IORESOURCE_REG, },
};
-static struct resource ldo13_resources[] __devinitdata = {
+static struct resource ldo13_resources[] = {
{0x4a, 0x4a, "ldov", IORESOURCE_REG, },
};
-static struct resource ldo14_resources[] __devinitdata = {
+static struct resource ldo14_resources[] = {
{0x4e, 0x4e, "ldov", IORESOURCE_REG, },
};
-static struct resource ldo15_resources[] __devinitdata = {
+static struct resource ldo15_resources[] = {
{0x52, 0x52, "ldov", IORESOURCE_REG, },
};
-static struct resource ldo16_resources[] __devinitdata = {
+static struct resource ldo16_resources[] = {
{0x12, 0x12, "ldov", IORESOURCE_REG, },
};
-static struct resource ldo17_resources[] __devinitdata = {
+static struct resource ldo17_resources[] = {
{0x16, 0x16, "ldov", IORESOURCE_REG, },
};
-static struct resource ldo18_resources[] __devinitdata = {
+static struct resource ldo18_resources[] = {
{0x74, 0x74, "ldov", IORESOURCE_REG, },
};
-static struct resource ldo19_resources[] __devinitdata = {
+static struct resource ldo19_resources[] = {
{0x5e, 0x5e, "ldov", IORESOURCE_REG, },
};
-static struct resource ldo20_resources[] __devinitdata = {
+static struct resource ldo20_resources[] = {
{0x9e, 0x9e, "ldov", IORESOURCE_REG, },
};
-static struct mfd_cell reg_devs[] __devinitdata = {
+static struct mfd_cell reg_devs[] = {
{
.name = "max8925-regulator",
.id = 0,
@@ -714,7 +714,7 @@
return 0;
}
-static void __devinit init_regulator(struct max8925_chip *chip,
+static void init_regulator(struct max8925_chip *chip,
struct max8925_platform_data *pdata)
{
int ret;
@@ -821,7 +821,7 @@
}
}
-int __devinit max8925_device_init(struct max8925_chip *chip,
+int max8925_device_init(struct max8925_chip *chip,
struct max8925_platform_data *pdata)
{
int ret;
@@ -901,7 +901,7 @@
return ret;
}
-void __devexit max8925_device_exit(struct max8925_chip *chip)
+void max8925_device_exit(struct max8925_chip *chip)
{
if (chip->core_irq)
free_irq(chip->core_irq, chip);
diff --git a/drivers/mfd/max8925-i2c.c b/drivers/mfd/max8925-i2c.c
index d9e4b36..00b5b45 100644
--- a/drivers/mfd/max8925-i2c.c
+++ b/drivers/mfd/max8925-i2c.c
@@ -135,7 +135,7 @@
};
MODULE_DEVICE_TABLE(i2c, max8925_id_table);
-static int __devinit max8925_probe(struct i2c_client *client,
+static int max8925_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct max8925_platform_data *pdata = client->dev.platform_data;
@@ -168,7 +168,7 @@
return 0;
}
-static int __devexit max8925_remove(struct i2c_client *client)
+static int max8925_remove(struct i2c_client *client)
{
struct max8925_chip *chip = i2c_get_clientdata(client);
@@ -210,7 +210,7 @@
.pm = &max8925_pm_ops,
},
.probe = max8925_probe,
- .remove = __devexit_p(max8925_remove),
+ .remove = max8925_remove,
.id_table = max8925_id_table,
};
diff --git a/drivers/mfd/mc13xxx-i2c.c b/drivers/mfd/mc13xxx-i2c.c
index 9d18dde..7957999 100644
--- a/drivers/mfd/mc13xxx-i2c.c
+++ b/drivers/mfd/mc13xxx-i2c.c
@@ -85,7 +85,7 @@
return ret;
}
-static int __devexit mc13xxx_i2c_remove(struct i2c_client *client)
+static int mc13xxx_i2c_remove(struct i2c_client *client)
{
struct mc13xxx *mc13xxx = dev_get_drvdata(&client->dev);
@@ -102,7 +102,7 @@
.of_match_table = mc13xxx_dt_ids,
},
.probe = mc13xxx_i2c_probe,
- .remove = __devexit_p(mc13xxx_i2c_remove),
+ .remove = mc13xxx_i2c_remove,
};
static int __init mc13xxx_i2c_init(void)
diff --git a/drivers/mfd/mc13xxx-spi.c b/drivers/mfd/mc13xxx-spi.c
index 0bdb43a..cb32f69 100644
--- a/drivers/mfd/mc13xxx-spi.c
+++ b/drivers/mfd/mc13xxx-spi.c
@@ -159,7 +159,7 @@
return ret;
}
-static int __devexit mc13xxx_spi_remove(struct spi_device *spi)
+static int mc13xxx_spi_remove(struct spi_device *spi)
{
struct mc13xxx *mc13xxx = dev_get_drvdata(&spi->dev);
@@ -176,7 +176,7 @@
.of_match_table = mc13xxx_dt_ids,
},
.probe = mc13xxx_spi_probe,
- .remove = __devexit_p(mc13xxx_spi_remove),
+ .remove = mc13xxx_spi_remove,
};
static int __init mc13xxx_init(void)
diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c
index 23cec57..29b8ed2 100644
--- a/drivers/mfd/omap-usb-host.c
+++ b/drivers/mfd/omap-usb-host.c
@@ -464,7 +464,7 @@
*
* Allocates basic resources for this USB host controller.
*/
-static int __devinit usbhs_omap_probe(struct platform_device *pdev)
+static int usbhs_omap_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct usbhs_omap_platform_data *pdata = dev->platform_data;
@@ -652,7 +652,7 @@
*
* Reverses the effect of usbhs_omap_probe().
*/
-static int __devexit usbhs_omap_remove(struct platform_device *pdev)
+static int usbhs_omap_remove(struct platform_device *pdev)
{
struct usbhs_hcd_omap *omap = platform_get_drvdata(pdev);
diff --git a/drivers/mfd/omap-usb-tll.c b/drivers/mfd/omap-usb-tll.c
index 4b7757b..401b976 100644
--- a/drivers/mfd/omap-usb-tll.c
+++ b/drivers/mfd/omap-usb-tll.c
@@ -200,7 +200,7 @@
*
* Allocates basic resources for this USB host controller.
*/
-static int __devinit usbtll_omap_probe(struct platform_device *pdev)
+static int usbtll_omap_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct usbtll_omap_platform_data *pdata = dev->platform_data;
@@ -348,7 +348,7 @@
*
* Reverses the effect of usbtll_omap_probe().
*/
-static int __devexit usbtll_omap_remove(struct platform_device *pdev)
+static int usbtll_omap_remove(struct platform_device *pdev)
{
struct usbtll_omap *tll = platform_get_drvdata(pdev);
@@ -424,7 +424,7 @@
.pm = &usbtllomap_dev_pm_ops,
},
.probe = usbtll_omap_probe,
- .remove = __devexit_p(usbtll_omap_remove),
+ .remove = usbtll_omap_remove,
};
int omap_tll_enable(void)
diff --git a/drivers/mfd/palmas.c b/drivers/mfd/palmas.c
index 4f8d6e6..6ffd7a2 100644
--- a/drivers/mfd/palmas.c
+++ b/drivers/mfd/palmas.c
@@ -247,7 +247,7 @@
PALMAS_INT1_MASK),
};
-static void __devinit palmas_dt_to_pdata(struct device_node *node,
+static void palmas_dt_to_pdata(struct device_node *node,
struct palmas_platform_data *pdata)
{
int ret;
@@ -275,7 +275,7 @@
PALMAS_POWER_CTRL_ENABLE2_MASK;
}
-static int __devinit palmas_i2c_probe(struct i2c_client *i2c,
+static int palmas_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
struct palmas *palmas;
@@ -492,7 +492,7 @@
};
MODULE_DEVICE_TABLE(i2c, palmas_i2c_id);
-static struct of_device_id __devinitdata of_palmas_match_tbl[] = {
+static struct of_device_id of_palmas_match_tbl[] = {
{ .compatible = "ti,palmas", },
{ /* end */ }
};
diff --git a/drivers/mfd/pcf50633-adc.c b/drivers/mfd/pcf50633-adc.c
index 3927c17..18b53cb 100644
--- a/drivers/mfd/pcf50633-adc.c
+++ b/drivers/mfd/pcf50633-adc.c
@@ -199,7 +199,7 @@
kfree(req);
}
-static int __devinit pcf50633_adc_probe(struct platform_device *pdev)
+static int pcf50633_adc_probe(struct platform_device *pdev)
{
struct pcf50633_adc *adc;
@@ -218,7 +218,7 @@
return 0;
}
-static int __devexit pcf50633_adc_remove(struct platform_device *pdev)
+static int pcf50633_adc_remove(struct platform_device *pdev)
{
struct pcf50633_adc *adc = platform_get_drvdata(pdev);
int i, head;
@@ -246,7 +246,7 @@
.name = "pcf50633-adc",
},
.probe = pcf50633_adc_probe,
- .remove = __devexit_p(pcf50633_adc_remove),
+ .remove = pcf50633_adc_remove,
};
module_platform_driver(pcf50633_adc_driver);
diff --git a/drivers/mfd/pcf50633-core.c b/drivers/mfd/pcf50633-core.c
index 45ce1fb..64803f1 100644
--- a/drivers/mfd/pcf50633-core.c
+++ b/drivers/mfd/pcf50633-core.c
@@ -191,7 +191,7 @@
.val_bits = 8,
};
-static int __devinit pcf50633_probe(struct i2c_client *client,
+static int pcf50633_probe(struct i2c_client *client,
const struct i2c_device_id *ids)
{
struct pcf50633 *pcf;
@@ -275,7 +275,7 @@
return 0;
}
-static int __devexit pcf50633_remove(struct i2c_client *client)
+static int pcf50633_remove(struct i2c_client *client)
{
struct pcf50633 *pcf = i2c_get_clientdata(client);
int i;
@@ -308,7 +308,7 @@
},
.id_table = pcf50633_id_table,
.probe = pcf50633_probe,
- .remove = __devexit_p(pcf50633_remove),
+ .remove = pcf50633_remove,
};
static int __init pcf50633_init(void)
diff --git a/drivers/mfd/pm8921-core.c b/drivers/mfd/pm8921-core.c
index e873b157..d4b297c 100644
--- a/drivers/mfd/pm8921-core.c
+++ b/drivers/mfd/pm8921-core.c
@@ -80,7 +80,7 @@
.pmic_read_irq_stat = pm8921_read_irq_stat,
};
-static int __devinit pm8921_add_subdevices(const struct pm8921_platform_data
+static int pm8921_add_subdevices(const struct pm8921_platform_data
*pdata,
struct pm8921 *pmic,
u32 rev)
@@ -104,7 +104,7 @@
return ret;
}
-static int __devinit pm8921_probe(struct platform_device *pdev)
+static int pm8921_probe(struct platform_device *pdev)
{
const struct pm8921_platform_data *pdata = pdev->dev.platform_data;
struct pm8921 *pmic;
@@ -165,7 +165,7 @@
return rc;
}
-static int __devexit pm8921_remove(struct platform_device *pdev)
+static int pm8921_remove(struct platform_device *pdev)
{
struct pm8xxx_drvdata *drvdata;
struct pm8921 *pmic = NULL;
@@ -187,7 +187,7 @@
static struct platform_driver pm8921_driver = {
.probe = pm8921_probe,
- .remove = __devexit_p(pm8921_remove),
+ .remove = pm8921_remove,
.driver = {
.name = "pm8921-core",
.owner = THIS_MODULE,
diff --git a/drivers/mfd/pm8xxx-irq.c b/drivers/mfd/pm8xxx-irq.c
index d452dd0..1360e20 100644
--- a/drivers/mfd/pm8xxx-irq.c
+++ b/drivers/mfd/pm8xxx-irq.c
@@ -309,7 +309,7 @@
}
EXPORT_SYMBOL_GPL(pm8xxx_get_irq_stat);
-struct pm_irq_chip * __devinit pm8xxx_irq_init(struct device *dev,
+struct pm_irq_chip * pm8xxx_irq_init(struct device *dev,
const struct pm8xxx_irq_platform_data *pdata)
{
struct pm_irq_chip *chip;
@@ -363,7 +363,7 @@
return chip;
}
-int __devexit pm8xxx_irq_exit(struct pm_irq_chip *chip)
+int pm8xxx_irq_exit(struct pm_irq_chip *chip)
{
irq_set_chained_handler(chip->devirq, NULL);
kfree(chip);
diff --git a/drivers/mfd/rc5t583.c b/drivers/mfd/rc5t583.c
index f1a024e..14bdacc 100644
--- a/drivers/mfd/rc5t583.c
+++ b/drivers/mfd/rc5t583.c
@@ -246,7 +246,7 @@
.cache_type = REGCACHE_RBTREE,
};
-static int __devinit rc5t583_i2c_probe(struct i2c_client *i2c,
+static int rc5t583_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
struct rc5t583 *rc5t583;
@@ -303,7 +303,7 @@
return ret;
}
-static int __devexit rc5t583_i2c_remove(struct i2c_client *i2c)
+static int rc5t583_i2c_remove(struct i2c_client *i2c)
{
struct rc5t583 *rc5t583 = i2c_get_clientdata(i2c);
@@ -325,7 +325,7 @@
.owner = THIS_MODULE,
},
.probe = rc5t583_i2c_probe,
- .remove = __devexit_p(rc5t583_i2c_remove),
+ .remove = rc5t583_i2c_remove,
.id_table = rc5t583_i2c_id,
};
diff --git a/drivers/mfd/rdc321x-southbridge.c b/drivers/mfd/rdc321x-southbridge.c
index fbabc3cb..21b7bef 100644
--- a/drivers/mfd/rdc321x-southbridge.c
+++ b/drivers/mfd/rdc321x-southbridge.c
@@ -72,7 +72,7 @@
},
};
-static int __devinit rdc321x_sb_probe(struct pci_dev *pdev,
+static int rdc321x_sb_probe(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
int err;
@@ -91,7 +91,7 @@
NULL, 0, NULL);
}
-static void __devexit rdc321x_sb_remove(struct pci_dev *pdev)
+static void rdc321x_sb_remove(struct pci_dev *pdev)
{
mfd_remove_devices(&pdev->dev);
}
@@ -106,7 +106,7 @@
.name = "RDC321x Southbridge",
.id_table = rdc321x_sb_table,
.probe = rdc321x_sb_probe,
- .remove = __devexit_p(rdc321x_sb_remove),
+ .remove = rdc321x_sb_remove,
};
module_pci_driver(rdc321x_sb_driver);
diff --git a/drivers/mfd/rtl8411.c b/drivers/mfd/rtl8411.c
new file mode 100644
index 0000000..89f046c
--- /dev/null
+++ b/drivers/mfd/rtl8411.c
@@ -0,0 +1,251 @@
+/* Driver for Realtek PCI-Express card reader
+ *
+ * Copyright(c) 2009 Realtek Semiconductor Corp. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * Author:
+ * Wei WANG <wei_wang@realsil.com.cn>
+ * No. 450, Shenhu Road, Suzhou Industry Park, Suzhou, China
+ */
+
+#include <linux/module.h>
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/mfd/rtsx_pci.h>
+
+#include "rtsx_pcr.h"
+
+static u8 rtl8411_get_ic_version(struct rtsx_pcr *pcr)
+{
+ u8 val;
+
+ rtsx_pci_read_register(pcr, SYS_VER, &val);
+ return val & 0x0F;
+}
+
+static int rtl8411_extra_init_hw(struct rtsx_pcr *pcr)
+{
+ return rtsx_pci_write_register(pcr, CD_PAD_CTL,
+ CD_DISABLE_MASK | CD_AUTO_DISABLE, CD_ENABLE);
+}
+
+static int rtl8411_turn_on_led(struct rtsx_pcr *pcr)
+{
+ return rtsx_pci_write_register(pcr, CARD_GPIO, 0x01, 0x00);
+}
+
+static int rtl8411_turn_off_led(struct rtsx_pcr *pcr)
+{
+ return rtsx_pci_write_register(pcr, CARD_GPIO, 0x01, 0x01);
+}
+
+static int rtl8411_enable_auto_blink(struct rtsx_pcr *pcr)
+{
+ return rtsx_pci_write_register(pcr, CARD_AUTO_BLINK, 0xFF, 0x0D);
+}
+
+static int rtl8411_disable_auto_blink(struct rtsx_pcr *pcr)
+{
+ return rtsx_pci_write_register(pcr, CARD_AUTO_BLINK, 0x08, 0x00);
+}
+
+static int rtl8411_card_power_on(struct rtsx_pcr *pcr, int card)
+{
+ int err;
+
+ rtsx_pci_init_cmd(pcr);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_PWR_CTL,
+ BPP_POWER_MASK, BPP_POWER_5_PERCENT_ON);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, LDO_CTL,
+ BPP_LDO_POWB, BPP_LDO_SUSPEND);
+ err = rtsx_pci_send_cmd(pcr, 100);
+ if (err < 0)
+ return err;
+
+ /* To avoid too large in-rush current */
+ udelay(150);
+
+ err = rtsx_pci_write_register(pcr, CARD_PWR_CTL,
+ BPP_POWER_MASK, BPP_POWER_10_PERCENT_ON);
+ if (err < 0)
+ return err;
+
+ udelay(150);
+
+ err = rtsx_pci_write_register(pcr, CARD_PWR_CTL,
+ BPP_POWER_MASK, BPP_POWER_15_PERCENT_ON);
+ if (err < 0)
+ return err;
+
+ udelay(150);
+
+ err = rtsx_pci_write_register(pcr, CARD_PWR_CTL,
+ BPP_POWER_MASK, BPP_POWER_ON);
+ if (err < 0)
+ return err;
+
+ return rtsx_pci_write_register(pcr, LDO_CTL, BPP_LDO_POWB, BPP_LDO_ON);
+}
+
+static int rtl8411_card_power_off(struct rtsx_pcr *pcr, int card)
+{
+ int err;
+
+ err = rtsx_pci_write_register(pcr, CARD_PWR_CTL,
+ BPP_POWER_MASK, BPP_POWER_OFF);
+ if (err < 0)
+ return err;
+
+ return rtsx_pci_write_register(pcr, LDO_CTL,
+ BPP_LDO_POWB, BPP_LDO_SUSPEND);
+}
+
+static unsigned int rtl8411_cd_deglitch(struct rtsx_pcr *pcr)
+{
+ unsigned int card_exist;
+
+ card_exist = rtsx_pci_readl(pcr, RTSX_BIPR);
+ card_exist &= CARD_EXIST;
+ if (!card_exist) {
+ /* Enable card CD */
+ rtsx_pci_write_register(pcr, CD_PAD_CTL,
+ CD_DISABLE_MASK, CD_ENABLE);
+ /* Enable card interrupt */
+ rtsx_pci_write_register(pcr, EFUSE_CONTENT, 0xe0, 0x00);
+ return 0;
+ }
+
+ if (hweight32(card_exist) > 1) {
+ rtsx_pci_write_register(pcr, CARD_PWR_CTL,
+ BPP_POWER_MASK, BPP_POWER_5_PERCENT_ON);
+ msleep(100);
+
+ card_exist = rtsx_pci_readl(pcr, RTSX_BIPR);
+ if (card_exist & MS_EXIST)
+ card_exist = MS_EXIST;
+ else if (card_exist & SD_EXIST)
+ card_exist = SD_EXIST;
+ else
+ card_exist = 0;
+
+ rtsx_pci_write_register(pcr, CARD_PWR_CTL,
+ BPP_POWER_MASK, BPP_POWER_OFF);
+
+ dev_dbg(&(pcr->pci->dev),
+ "After CD deglitch, card_exist = 0x%x\n",
+ card_exist);
+ }
+
+ if (card_exist & MS_EXIST) {
+ /* Disable SD interrupt */
+ rtsx_pci_write_register(pcr, EFUSE_CONTENT, 0xe0, 0x40);
+ rtsx_pci_write_register(pcr, CD_PAD_CTL,
+ CD_DISABLE_MASK, MS_CD_EN_ONLY);
+ } else if (card_exist & SD_EXIST) {
+ /* Disable MS interrupt */
+ rtsx_pci_write_register(pcr, EFUSE_CONTENT, 0xe0, 0x80);
+ rtsx_pci_write_register(pcr, CD_PAD_CTL,
+ CD_DISABLE_MASK, SD_CD_EN_ONLY);
+ }
+
+ return card_exist;
+}
+
+static const struct pcr_ops rtl8411_pcr_ops = {
+ .extra_init_hw = rtl8411_extra_init_hw,
+ .optimize_phy = NULL,
+ .turn_on_led = rtl8411_turn_on_led,
+ .turn_off_led = rtl8411_turn_off_led,
+ .enable_auto_blink = rtl8411_enable_auto_blink,
+ .disable_auto_blink = rtl8411_disable_auto_blink,
+ .card_power_on = rtl8411_card_power_on,
+ .card_power_off = rtl8411_card_power_off,
+ .cd_deglitch = rtl8411_cd_deglitch,
+};
+
+/* SD Pull Control Enable:
+ * SD_DAT[3:0] ==> pull up
+ * SD_CD ==> pull up
+ * SD_WP ==> pull up
+ * SD_CMD ==> pull up
+ * SD_CLK ==> pull down
+ */
+static const u32 rtl8411_sd_pull_ctl_enable_tbl[] = {
+ RTSX_REG_PAIR(CARD_PULL_CTL1, 0xAA),
+ RTSX_REG_PAIR(CARD_PULL_CTL2, 0xAA),
+ RTSX_REG_PAIR(CARD_PULL_CTL3, 0xA9),
+ RTSX_REG_PAIR(CARD_PULL_CTL4, 0x09),
+ RTSX_REG_PAIR(CARD_PULL_CTL5, 0x09),
+ RTSX_REG_PAIR(CARD_PULL_CTL6, 0x04),
+ 0,
+};
+
+/* SD Pull Control Disable:
+ * SD_DAT[3:0] ==> pull down
+ * SD_CD ==> pull up
+ * SD_WP ==> pull down
+ * SD_CMD ==> pull down
+ * SD_CLK ==> pull down
+ */
+static const u32 rtl8411_sd_pull_ctl_disable_tbl[] = {
+ RTSX_REG_PAIR(CARD_PULL_CTL1, 0x65),
+ RTSX_REG_PAIR(CARD_PULL_CTL2, 0x55),
+ RTSX_REG_PAIR(CARD_PULL_CTL3, 0x95),
+ RTSX_REG_PAIR(CARD_PULL_CTL4, 0x09),
+ RTSX_REG_PAIR(CARD_PULL_CTL5, 0x05),
+ RTSX_REG_PAIR(CARD_PULL_CTL6, 0x04),
+ 0,
+};
+
+/* MS Pull Control Enable:
+ * MS CD ==> pull up
+ * others ==> pull down
+ */
+static const u32 rtl8411_ms_pull_ctl_enable_tbl[] = {
+ RTSX_REG_PAIR(CARD_PULL_CTL1, 0x65),
+ RTSX_REG_PAIR(CARD_PULL_CTL2, 0x55),
+ RTSX_REG_PAIR(CARD_PULL_CTL3, 0x95),
+ RTSX_REG_PAIR(CARD_PULL_CTL4, 0x05),
+ RTSX_REG_PAIR(CARD_PULL_CTL5, 0x05),
+ RTSX_REG_PAIR(CARD_PULL_CTL6, 0x04),
+ 0,
+};
+
+/* MS Pull Control Disable:
+ * MS CD ==> pull up
+ * others ==> pull down
+ */
+static const u32 rtl8411_ms_pull_ctl_disable_tbl[] = {
+ RTSX_REG_PAIR(CARD_PULL_CTL1, 0x65),
+ RTSX_REG_PAIR(CARD_PULL_CTL2, 0x55),
+ RTSX_REG_PAIR(CARD_PULL_CTL3, 0x95),
+ RTSX_REG_PAIR(CARD_PULL_CTL4, 0x09),
+ RTSX_REG_PAIR(CARD_PULL_CTL5, 0x05),
+ RTSX_REG_PAIR(CARD_PULL_CTL6, 0x04),
+ 0,
+};
+
+void rtl8411_init_params(struct rtsx_pcr *pcr)
+{
+ pcr->extra_caps = EXTRA_CAPS_SD_SDR50 | EXTRA_CAPS_SD_SDR104;
+ pcr->num_slots = 2;
+ pcr->ops = &rtl8411_pcr_ops;
+
+ pcr->ic_version = rtl8411_get_ic_version(pcr);
+ pcr->sd_pull_ctl_enable_tbl = rtl8411_sd_pull_ctl_enable_tbl;
+ pcr->sd_pull_ctl_disable_tbl = rtl8411_sd_pull_ctl_disable_tbl;
+ pcr->ms_pull_ctl_enable_tbl = rtl8411_ms_pull_ctl_enable_tbl;
+ pcr->ms_pull_ctl_disable_tbl = rtl8411_ms_pull_ctl_disable_tbl;
+}
diff --git a/drivers/mfd/rts5209.c b/drivers/mfd/rts5209.c
new file mode 100644
index 0000000..283a4f1
--- /dev/null
+++ b/drivers/mfd/rts5209.c
@@ -0,0 +1,223 @@
+/* Driver for Realtek PCI-Express card reader
+ *
+ * Copyright(c) 2009 Realtek Semiconductor Corp. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * Author:
+ * Wei WANG <wei_wang@realsil.com.cn>
+ * No. 450, Shenhu Road, Suzhou Industry Park, Suzhou, China
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/mfd/rtsx_pci.h>
+
+#include "rtsx_pcr.h"
+
+static u8 rts5209_get_ic_version(struct rtsx_pcr *pcr)
+{
+ u8 val;
+
+ val = rtsx_pci_readb(pcr, 0x1C);
+ return val & 0x0F;
+}
+
+static void rts5209_init_vendor_cfg(struct rtsx_pcr *pcr)
+{
+ u32 val;
+
+ rtsx_pci_read_config_dword(pcr, 0x724, &val);
+ dev_dbg(&(pcr->pci->dev), "Cfg 0x724: 0x%x\n", val);
+
+ if (!(val & 0x80)) {
+ if (val & 0x08)
+ pcr->ms_pmos = false;
+ else
+ pcr->ms_pmos = true;
+ }
+}
+
+static int rts5209_extra_init_hw(struct rtsx_pcr *pcr)
+{
+ rtsx_pci_init_cmd(pcr);
+
+ /* Turn off LED */
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_GPIO, 0xFF, 0x03);
+ /* Configure GPIO as output */
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_GPIO_DIR, 0xFF, 0x03);
+
+ return rtsx_pci_send_cmd(pcr, 100);
+}
+
+static int rts5209_optimize_phy(struct rtsx_pcr *pcr)
+{
+ return rtsx_pci_write_phy_register(pcr, 0x00, 0xB966);
+}
+
+static int rts5209_turn_on_led(struct rtsx_pcr *pcr)
+{
+ return rtsx_pci_write_register(pcr, CARD_GPIO, 0x01, 0x00);
+}
+
+static int rts5209_turn_off_led(struct rtsx_pcr *pcr)
+{
+ return rtsx_pci_write_register(pcr, CARD_GPIO, 0x01, 0x01);
+}
+
+static int rts5209_enable_auto_blink(struct rtsx_pcr *pcr)
+{
+ return rtsx_pci_write_register(pcr, CARD_AUTO_BLINK, 0xFF, 0x0D);
+}
+
+static int rts5209_disable_auto_blink(struct rtsx_pcr *pcr)
+{
+ return rtsx_pci_write_register(pcr, CARD_AUTO_BLINK, 0x08, 0x00);
+}
+
+static int rts5209_card_power_on(struct rtsx_pcr *pcr, int card)
+{
+ int err;
+ u8 pwr_mask, partial_pwr_on, pwr_on;
+
+ pwr_mask = SD_POWER_MASK;
+ partial_pwr_on = SD_PARTIAL_POWER_ON;
+ pwr_on = SD_POWER_ON;
+
+ if (pcr->ms_pmos && (card == RTSX_MS_CARD)) {
+ pwr_mask = MS_POWER_MASK;
+ partial_pwr_on = MS_PARTIAL_POWER_ON;
+ pwr_on = MS_POWER_ON;
+ }
+
+ rtsx_pci_init_cmd(pcr);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_PWR_CTL,
+ pwr_mask, partial_pwr_on);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PWR_GATE_CTRL,
+ LDO3318_PWR_MASK, 0x04);
+ err = rtsx_pci_send_cmd(pcr, 100);
+ if (err < 0)
+ return err;
+
+ /* To avoid too large in-rush current */
+ udelay(150);
+
+ rtsx_pci_init_cmd(pcr);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_PWR_CTL, pwr_mask, pwr_on);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PWR_GATE_CTRL,
+ LDO3318_PWR_MASK, 0x00);
+ err = rtsx_pci_send_cmd(pcr, 100);
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+
+static int rts5209_card_power_off(struct rtsx_pcr *pcr, int card)
+{
+ u8 pwr_mask, pwr_off;
+
+ pwr_mask = SD_POWER_MASK;
+ pwr_off = SD_POWER_OFF;
+
+ if (pcr->ms_pmos && (card == RTSX_MS_CARD)) {
+ pwr_mask = MS_POWER_MASK;
+ pwr_off = MS_POWER_OFF;
+ }
+
+ rtsx_pci_init_cmd(pcr);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_PWR_CTL,
+ pwr_mask | PMOS_STRG_MASK, pwr_off | PMOS_STRG_400mA);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PWR_GATE_CTRL,
+ LDO3318_PWR_MASK, 0X06);
+ return rtsx_pci_send_cmd(pcr, 100);
+}
+
+static const struct pcr_ops rts5209_pcr_ops = {
+ .extra_init_hw = rts5209_extra_init_hw,
+ .optimize_phy = rts5209_optimize_phy,
+ .turn_on_led = rts5209_turn_on_led,
+ .turn_off_led = rts5209_turn_off_led,
+ .enable_auto_blink = rts5209_enable_auto_blink,
+ .disable_auto_blink = rts5209_disable_auto_blink,
+ .card_power_on = rts5209_card_power_on,
+ .card_power_off = rts5209_card_power_off,
+ .cd_deglitch = NULL,
+};
+
+/* SD Pull Control Enable:
+ * SD_DAT[3:0] ==> pull up
+ * SD_CD ==> pull up
+ * SD_WP ==> pull up
+ * SD_CMD ==> pull up
+ * SD_CLK ==> pull down
+ */
+static const u32 rts5209_sd_pull_ctl_enable_tbl[] = {
+ RTSX_REG_PAIR(CARD_PULL_CTL1, 0xAA),
+ RTSX_REG_PAIR(CARD_PULL_CTL2, 0xAA),
+ RTSX_REG_PAIR(CARD_PULL_CTL3, 0xE9),
+ 0,
+};
+
+/* SD Pull Control Disable:
+ * SD_DAT[3:0] ==> pull down
+ * SD_CD ==> pull up
+ * SD_WP ==> pull down
+ * SD_CMD ==> pull down
+ * SD_CLK ==> pull down
+ */
+static const u32 rts5209_sd_pull_ctl_disable_tbl[] = {
+ RTSX_REG_PAIR(CARD_PULL_CTL1, 0x55),
+ RTSX_REG_PAIR(CARD_PULL_CTL2, 0x55),
+ RTSX_REG_PAIR(CARD_PULL_CTL3, 0xD5),
+ 0,
+};
+
+/* MS Pull Control Enable:
+ * MS CD ==> pull up
+ * others ==> pull down
+ */
+static const u32 rts5209_ms_pull_ctl_enable_tbl[] = {
+ RTSX_REG_PAIR(CARD_PULL_CTL4, 0x55),
+ RTSX_REG_PAIR(CARD_PULL_CTL5, 0x55),
+ RTSX_REG_PAIR(CARD_PULL_CTL6, 0x15),
+ 0,
+};
+
+/* MS Pull Control Disable:
+ * MS CD ==> pull up
+ * others ==> pull down
+ */
+static const u32 rts5209_ms_pull_ctl_disable_tbl[] = {
+ RTSX_REG_PAIR(CARD_PULL_CTL4, 0x55),
+ RTSX_REG_PAIR(CARD_PULL_CTL5, 0x55),
+ RTSX_REG_PAIR(CARD_PULL_CTL6, 0x15),
+ 0,
+};
+
+void rts5209_init_params(struct rtsx_pcr *pcr)
+{
+ pcr->extra_caps = EXTRA_CAPS_SD_SDR50 |
+ EXTRA_CAPS_SD_SDR104 | EXTRA_CAPS_MMC_8BIT;
+ pcr->num_slots = 2;
+ pcr->ops = &rts5209_pcr_ops;
+
+ rts5209_init_vendor_cfg(pcr);
+
+ pcr->ic_version = rts5209_get_ic_version(pcr);
+ pcr->sd_pull_ctl_enable_tbl = rts5209_sd_pull_ctl_enable_tbl;
+ pcr->sd_pull_ctl_disable_tbl = rts5209_sd_pull_ctl_disable_tbl;
+ pcr->ms_pull_ctl_enable_tbl = rts5209_ms_pull_ctl_enable_tbl;
+ pcr->ms_pull_ctl_disable_tbl = rts5209_ms_pull_ctl_disable_tbl;
+}
diff --git a/drivers/mfd/rts5229.c b/drivers/mfd/rts5229.c
new file mode 100644
index 0000000..b9dbab2
--- /dev/null
+++ b/drivers/mfd/rts5229.c
@@ -0,0 +1,205 @@
+/* Driver for Realtek PCI-Express card reader
+ *
+ * Copyright(c) 2009 Realtek Semiconductor Corp. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * Author:
+ * Wei WANG <wei_wang@realsil.com.cn>
+ * No. 450, Shenhu Road, Suzhou Industry Park, Suzhou, China
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/mfd/rtsx_pci.h>
+
+#include "rtsx_pcr.h"
+
+static u8 rts5229_get_ic_version(struct rtsx_pcr *pcr)
+{
+ u8 val;
+
+ rtsx_pci_read_register(pcr, DUMMY_REG_RESET_0, &val);
+ return val & 0x0F;
+}
+
+static int rts5229_extra_init_hw(struct rtsx_pcr *pcr)
+{
+ rtsx_pci_init_cmd(pcr);
+
+ /* Configure GPIO as output */
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, GPIO_CTL, 0x02, 0x02);
+ /* Switch LDO3318 source from DV33 to card_3v3 */
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, LDO_PWR_SEL, 0x03, 0x00);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, LDO_PWR_SEL, 0x03, 0x01);
+ /* LED shine disabled, set initial shine cycle period */
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, OLT_LED_CTL, 0x0F, 0x02);
+
+ return rtsx_pci_send_cmd(pcr, 100);
+}
+
+static int rts5229_optimize_phy(struct rtsx_pcr *pcr)
+{
+ /* Optimize RX sensitivity */
+ return rtsx_pci_write_phy_register(pcr, 0x00, 0xBA42);
+}
+
+static int rts5229_turn_on_led(struct rtsx_pcr *pcr)
+{
+ return rtsx_pci_write_register(pcr, GPIO_CTL, 0x02, 0x02);
+}
+
+static int rts5229_turn_off_led(struct rtsx_pcr *pcr)
+{
+ return rtsx_pci_write_register(pcr, GPIO_CTL, 0x02, 0x00);
+}
+
+static int rts5229_enable_auto_blink(struct rtsx_pcr *pcr)
+{
+ return rtsx_pci_write_register(pcr, OLT_LED_CTL, 0x08, 0x08);
+}
+
+static int rts5229_disable_auto_blink(struct rtsx_pcr *pcr)
+{
+ return rtsx_pci_write_register(pcr, OLT_LED_CTL, 0x08, 0x00);
+}
+
+static int rts5229_card_power_on(struct rtsx_pcr *pcr, int card)
+{
+ int err;
+
+ rtsx_pci_init_cmd(pcr);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_PWR_CTL,
+ SD_POWER_MASK, SD_PARTIAL_POWER_ON);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PWR_GATE_CTRL,
+ LDO3318_PWR_MASK, 0x02);
+ err = rtsx_pci_send_cmd(pcr, 100);
+ if (err < 0)
+ return err;
+
+ /* To avoid too large in-rush current */
+ udelay(150);
+
+ rtsx_pci_init_cmd(pcr);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_PWR_CTL,
+ SD_POWER_MASK, SD_POWER_ON);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PWR_GATE_CTRL,
+ LDO3318_PWR_MASK, 0x06);
+ err = rtsx_pci_send_cmd(pcr, 100);
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+
+static int rts5229_card_power_off(struct rtsx_pcr *pcr, int card)
+{
+ rtsx_pci_init_cmd(pcr);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_PWR_CTL,
+ SD_POWER_MASK | PMOS_STRG_MASK,
+ SD_POWER_OFF | PMOS_STRG_400mA);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PWR_GATE_CTRL,
+ LDO3318_PWR_MASK, 0X00);
+ return rtsx_pci_send_cmd(pcr, 100);
+}
+
+static const struct pcr_ops rts5229_pcr_ops = {
+ .extra_init_hw = rts5229_extra_init_hw,
+ .optimize_phy = rts5229_optimize_phy,
+ .turn_on_led = rts5229_turn_on_led,
+ .turn_off_led = rts5229_turn_off_led,
+ .enable_auto_blink = rts5229_enable_auto_blink,
+ .disable_auto_blink = rts5229_disable_auto_blink,
+ .card_power_on = rts5229_card_power_on,
+ .card_power_off = rts5229_card_power_off,
+ .cd_deglitch = NULL,
+};
+
+/* SD Pull Control Enable:
+ * SD_DAT[3:0] ==> pull up
+ * SD_CD ==> pull up
+ * SD_WP ==> pull up
+ * SD_CMD ==> pull up
+ * SD_CLK ==> pull down
+ */
+static const u32 rts5229_sd_pull_ctl_enable_tbl1[] = {
+ RTSX_REG_PAIR(CARD_PULL_CTL2, 0xAA),
+ RTSX_REG_PAIR(CARD_PULL_CTL3, 0xE9),
+ 0,
+};
+
+/* For RTS5229 version C */
+static const u32 rts5229_sd_pull_ctl_enable_tbl2[] = {
+ RTSX_REG_PAIR(CARD_PULL_CTL2, 0xAA),
+ RTSX_REG_PAIR(CARD_PULL_CTL3, 0xD9),
+ 0,
+};
+
+/* SD Pull Control Disable:
+ * SD_DAT[3:0] ==> pull down
+ * SD_CD ==> pull up
+ * SD_WP ==> pull down
+ * SD_CMD ==> pull down
+ * SD_CLK ==> pull down
+ */
+static const u32 rts5229_sd_pull_ctl_disable_tbl1[] = {
+ RTSX_REG_PAIR(CARD_PULL_CTL2, 0x55),
+ RTSX_REG_PAIR(CARD_PULL_CTL3, 0xD5),
+ 0,
+};
+
+/* For RTS5229 version C */
+static const u32 rts5229_sd_pull_ctl_disable_tbl2[] = {
+ RTSX_REG_PAIR(CARD_PULL_CTL2, 0x55),
+ RTSX_REG_PAIR(CARD_PULL_CTL3, 0xE5),
+ 0,
+};
+
+/* MS Pull Control Enable:
+ * MS CD ==> pull up
+ * others ==> pull down
+ */
+static const u32 rts5229_ms_pull_ctl_enable_tbl[] = {
+ RTSX_REG_PAIR(CARD_PULL_CTL5, 0x55),
+ RTSX_REG_PAIR(CARD_PULL_CTL6, 0x15),
+ 0,
+};
+
+/* MS Pull Control Disable:
+ * MS CD ==> pull up
+ * others ==> pull down
+ */
+static const u32 rts5229_ms_pull_ctl_disable_tbl[] = {
+ RTSX_REG_PAIR(CARD_PULL_CTL5, 0x55),
+ RTSX_REG_PAIR(CARD_PULL_CTL6, 0x15),
+ 0,
+};
+
+void rts5229_init_params(struct rtsx_pcr *pcr)
+{
+ pcr->extra_caps = EXTRA_CAPS_SD_SDR50 | EXTRA_CAPS_SD_SDR104;
+ pcr->num_slots = 2;
+ pcr->ops = &rts5229_pcr_ops;
+
+ pcr->ic_version = rts5229_get_ic_version(pcr);
+ if (pcr->ic_version == IC_VER_C) {
+ pcr->sd_pull_ctl_enable_tbl = rts5229_sd_pull_ctl_enable_tbl2;
+ pcr->sd_pull_ctl_disable_tbl = rts5229_sd_pull_ctl_disable_tbl2;
+ } else {
+ pcr->sd_pull_ctl_enable_tbl = rts5229_sd_pull_ctl_enable_tbl1;
+ pcr->sd_pull_ctl_disable_tbl = rts5229_sd_pull_ctl_disable_tbl1;
+ }
+ pcr->ms_pull_ctl_enable_tbl = rts5229_ms_pull_ctl_enable_tbl;
+ pcr->ms_pull_ctl_disable_tbl = rts5229_ms_pull_ctl_disable_tbl;
+}
diff --git a/drivers/mfd/rtsx_pcr.c b/drivers/mfd/rtsx_pcr.c
new file mode 100644
index 0000000..56d4377
--- /dev/null
+++ b/drivers/mfd/rtsx_pcr.c
@@ -0,0 +1,1251 @@
+/* Driver for Realtek PCI-Express card reader
+ *
+ * Copyright(c) 2009 Realtek Semiconductor Corp. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * Author:
+ * Wei WANG <wei_wang@realsil.com.cn>
+ * No. 450, Shenhu Road, Suzhou Industry Park, Suzhou, China
+ */
+
+#include <linux/pci.h>
+#include <linux/module.h>
+#include <linux/dma-mapping.h>
+#include <linux/highmem.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/idr.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/rtsx_pci.h>
+#include <asm/unaligned.h>
+
+#include "rtsx_pcr.h"
+
+static bool msi_en = true;
+module_param(msi_en, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(msi_en, "Enable MSI");
+
+static DEFINE_IDR(rtsx_pci_idr);
+static DEFINE_SPINLOCK(rtsx_pci_lock);
+
+static struct mfd_cell rtsx_pcr_cells[] = {
+ [RTSX_SD_CARD] = {
+ .name = DRV_NAME_RTSX_PCI_SDMMC,
+ },
+ [RTSX_MS_CARD] = {
+ .name = DRV_NAME_RTSX_PCI_MS,
+ },
+};
+
+static DEFINE_PCI_DEVICE_TABLE(rtsx_pci_ids) = {
+ { PCI_DEVICE(0x10EC, 0x5209), PCI_CLASS_OTHERS << 16, 0xFF0000 },
+ { PCI_DEVICE(0x10EC, 0x5229), PCI_CLASS_OTHERS << 16, 0xFF0000 },
+ { PCI_DEVICE(0x10EC, 0x5289), PCI_CLASS_OTHERS << 16, 0xFF0000 },
+ { 0, }
+};
+
+MODULE_DEVICE_TABLE(pci, rtsx_pci_ids);
+
+void rtsx_pci_start_run(struct rtsx_pcr *pcr)
+{
+ /* If pci device removed, don't queue idle work any more */
+ if (pcr->remove_pci)
+ return;
+
+ if (pcr->state != PDEV_STAT_RUN) {
+ pcr->state = PDEV_STAT_RUN;
+ if (pcr->ops->enable_auto_blink)
+ pcr->ops->enable_auto_blink(pcr);
+ }
+
+ mod_delayed_work(system_wq, &pcr->idle_work, msecs_to_jiffies(200));
+}
+EXPORT_SYMBOL_GPL(rtsx_pci_start_run);
+
+int rtsx_pci_write_register(struct rtsx_pcr *pcr, u16 addr, u8 mask, u8 data)
+{
+ int i;
+ u32 val = HAIMR_WRITE_START;
+
+ val |= (u32)(addr & 0x3FFF) << 16;
+ val |= (u32)mask << 8;
+ val |= (u32)data;
+
+ rtsx_pci_writel(pcr, RTSX_HAIMR, val);
+
+ for (i = 0; i < MAX_RW_REG_CNT; i++) {
+ val = rtsx_pci_readl(pcr, RTSX_HAIMR);
+ if ((val & HAIMR_TRANS_END) == 0) {
+ if (data != (u8)val)
+ return -EIO;
+ return 0;
+ }
+ }
+
+ return -ETIMEDOUT;
+}
+EXPORT_SYMBOL_GPL(rtsx_pci_write_register);
+
+int rtsx_pci_read_register(struct rtsx_pcr *pcr, u16 addr, u8 *data)
+{
+ u32 val = HAIMR_READ_START;
+ int i;
+
+ val |= (u32)(addr & 0x3FFF) << 16;
+ rtsx_pci_writel(pcr, RTSX_HAIMR, val);
+
+ for (i = 0; i < MAX_RW_REG_CNT; i++) {
+ val = rtsx_pci_readl(pcr, RTSX_HAIMR);
+ if ((val & HAIMR_TRANS_END) == 0)
+ break;
+ }
+
+ if (i >= MAX_RW_REG_CNT)
+ return -ETIMEDOUT;
+
+ if (data)
+ *data = (u8)(val & 0xFF);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(rtsx_pci_read_register);
+
+int rtsx_pci_write_phy_register(struct rtsx_pcr *pcr, u8 addr, u16 val)
+{
+ int err, i, finished = 0;
+ u8 tmp;
+
+ rtsx_pci_init_cmd(pcr);
+
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PHYDATA0, 0xFF, (u8)val);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PHYDATA1, 0xFF, (u8)(val >> 8));
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PHYADDR, 0xFF, addr);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PHYRWCTL, 0xFF, 0x81);
+
+ err = rtsx_pci_send_cmd(pcr, 100);
+ if (err < 0)
+ return err;
+
+ for (i = 0; i < 100000; i++) {
+ err = rtsx_pci_read_register(pcr, PHYRWCTL, &tmp);
+ if (err < 0)
+ return err;
+
+ if (!(tmp & 0x80)) {
+ finished = 1;
+ break;
+ }
+ }
+
+ if (!finished)
+ return -ETIMEDOUT;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(rtsx_pci_write_phy_register);
+
+int rtsx_pci_read_phy_register(struct rtsx_pcr *pcr, u8 addr, u16 *val)
+{
+ int err, i, finished = 0;
+ u16 data;
+ u8 *ptr, tmp;
+
+ rtsx_pci_init_cmd(pcr);
+
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PHYADDR, 0xFF, addr);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PHYRWCTL, 0xFF, 0x80);
+
+ err = rtsx_pci_send_cmd(pcr, 100);
+ if (err < 0)
+ return err;
+
+ for (i = 0; i < 100000; i++) {
+ err = rtsx_pci_read_register(pcr, PHYRWCTL, &tmp);
+ if (err < 0)
+ return err;
+
+ if (!(tmp & 0x80)) {
+ finished = 1;
+ break;
+ }
+ }
+
+ if (!finished)
+ return -ETIMEDOUT;
+
+ rtsx_pci_init_cmd(pcr);
+
+ rtsx_pci_add_cmd(pcr, READ_REG_CMD, PHYDATA0, 0, 0);
+ rtsx_pci_add_cmd(pcr, READ_REG_CMD, PHYDATA1, 0, 0);
+
+ err = rtsx_pci_send_cmd(pcr, 100);
+ if (err < 0)
+ return err;
+
+ ptr = rtsx_pci_get_cmd_data(pcr);
+ data = ((u16)ptr[1] << 8) | ptr[0];
+
+ if (val)
+ *val = data;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(rtsx_pci_read_phy_register);
+
+void rtsx_pci_stop_cmd(struct rtsx_pcr *pcr)
+{
+ rtsx_pci_writel(pcr, RTSX_HCBCTLR, STOP_CMD);
+ rtsx_pci_writel(pcr, RTSX_HDBCTLR, STOP_DMA);
+
+ rtsx_pci_write_register(pcr, DMACTL, 0x80, 0x80);
+ rtsx_pci_write_register(pcr, RBCTL, 0x80, 0x80);
+}
+EXPORT_SYMBOL_GPL(rtsx_pci_stop_cmd);
+
+void rtsx_pci_add_cmd(struct rtsx_pcr *pcr,
+ u8 cmd_type, u16 reg_addr, u8 mask, u8 data)
+{
+ unsigned long flags;
+ u32 val = 0;
+ u32 *ptr = (u32 *)(pcr->host_cmds_ptr);
+
+ val |= (u32)(cmd_type & 0x03) << 30;
+ val |= (u32)(reg_addr & 0x3FFF) << 16;
+ val |= (u32)mask << 8;
+ val |= (u32)data;
+
+ spin_lock_irqsave(&pcr->lock, flags);
+ ptr += pcr->ci;
+ if (pcr->ci < (HOST_CMDS_BUF_LEN / 4)) {
+ put_unaligned_le32(val, ptr);
+ ptr++;
+ pcr->ci++;
+ }
+ spin_unlock_irqrestore(&pcr->lock, flags);
+}
+EXPORT_SYMBOL_GPL(rtsx_pci_add_cmd);
+
+void rtsx_pci_send_cmd_no_wait(struct rtsx_pcr *pcr)
+{
+ u32 val = 1 << 31;
+
+ rtsx_pci_writel(pcr, RTSX_HCBAR, pcr->host_cmds_addr);
+
+ val |= (u32)(pcr->ci * 4) & 0x00FFFFFF;
+ /* Hardware Auto Response */
+ val |= 0x40000000;
+ rtsx_pci_writel(pcr, RTSX_HCBCTLR, val);
+}
+EXPORT_SYMBOL_GPL(rtsx_pci_send_cmd_no_wait);
+
+int rtsx_pci_send_cmd(struct rtsx_pcr *pcr, int timeout)
+{
+ struct completion trans_done;
+ u32 val = 1 << 31;
+ long timeleft;
+ unsigned long flags;
+ int err = 0;
+
+ spin_lock_irqsave(&pcr->lock, flags);
+
+ /* set up data structures for the wakeup system */
+ pcr->done = &trans_done;
+ pcr->trans_result = TRANS_NOT_READY;
+ init_completion(&trans_done);
+
+ rtsx_pci_writel(pcr, RTSX_HCBAR, pcr->host_cmds_addr);
+
+ val |= (u32)(pcr->ci * 4) & 0x00FFFFFF;
+ /* Hardware Auto Response */
+ val |= 0x40000000;
+ rtsx_pci_writel(pcr, RTSX_HCBCTLR, val);
+
+ spin_unlock_irqrestore(&pcr->lock, flags);
+
+ /* Wait for TRANS_OK_INT */
+ timeleft = wait_for_completion_interruptible_timeout(
+ &trans_done, msecs_to_jiffies(timeout));
+ if (timeleft <= 0) {
+ dev_dbg(&(pcr->pci->dev), "Timeout (%s %d)\n",
+ __func__, __LINE__);
+ err = -ETIMEDOUT;
+ goto finish_send_cmd;
+ }
+
+ spin_lock_irqsave(&pcr->lock, flags);
+ if (pcr->trans_result == TRANS_RESULT_FAIL)
+ err = -EINVAL;
+ else if (pcr->trans_result == TRANS_RESULT_OK)
+ err = 0;
+ else if (pcr->trans_result == TRANS_NO_DEVICE)
+ err = -ENODEV;
+ spin_unlock_irqrestore(&pcr->lock, flags);
+
+finish_send_cmd:
+ spin_lock_irqsave(&pcr->lock, flags);
+ pcr->done = NULL;
+ spin_unlock_irqrestore(&pcr->lock, flags);
+
+ if ((err < 0) && (err != -ENODEV))
+ rtsx_pci_stop_cmd(pcr);
+
+ if (pcr->finish_me)
+ complete(pcr->finish_me);
+
+ return err;
+}
+EXPORT_SYMBOL_GPL(rtsx_pci_send_cmd);
+
+static void rtsx_pci_add_sg_tbl(struct rtsx_pcr *pcr,
+ dma_addr_t addr, unsigned int len, int end)
+{
+ u64 *ptr = (u64 *)(pcr->host_sg_tbl_ptr) + pcr->sgi;
+ u64 val;
+ u8 option = SG_VALID | SG_TRANS_DATA;
+
+ dev_dbg(&(pcr->pci->dev), "DMA addr: 0x%x, Len: 0x%x\n",
+ (unsigned int)addr, len);
+
+ if (end)
+ option |= SG_END;
+ val = ((u64)addr << 32) | ((u64)len << 12) | option;
+
+ put_unaligned_le64(val, ptr);
+ ptr++;
+ pcr->sgi++;
+}
+
+int rtsx_pci_transfer_data(struct rtsx_pcr *pcr, struct scatterlist *sglist,
+ int num_sg, bool read, int timeout)
+{
+ struct completion trans_done;
+ u8 dir;
+ int err = 0, i, count;
+ long timeleft;
+ unsigned long flags;
+ struct scatterlist *sg;
+ enum dma_data_direction dma_dir;
+ u32 val;
+ dma_addr_t addr;
+ unsigned int len;
+
+ dev_dbg(&(pcr->pci->dev), "--> %s: num_sg = %d\n", __func__, num_sg);
+
+ /* don't transfer data during abort processing */
+ if (pcr->remove_pci)
+ return -EINVAL;
+
+ if ((sglist == NULL) || (num_sg <= 0))
+ return -EINVAL;
+
+ if (read) {
+ dir = DEVICE_TO_HOST;
+ dma_dir = DMA_FROM_DEVICE;
+ } else {
+ dir = HOST_TO_DEVICE;
+ dma_dir = DMA_TO_DEVICE;
+ }
+
+ count = dma_map_sg(&(pcr->pci->dev), sglist, num_sg, dma_dir);
+ if (count < 1) {
+ dev_err(&(pcr->pci->dev), "scatterlist map failed\n");
+ return -EINVAL;
+ }
+ dev_dbg(&(pcr->pci->dev), "DMA mapping count: %d\n", count);
+
+ val = ((u32)(dir & 0x01) << 29) | TRIG_DMA | ADMA_MODE;
+ pcr->sgi = 0;
+ for_each_sg(sglist, sg, count, i) {
+ addr = sg_dma_address(sg);
+ len = sg_dma_len(sg);
+ rtsx_pci_add_sg_tbl(pcr, addr, len, i == count - 1);
+ }
+
+ spin_lock_irqsave(&pcr->lock, flags);
+
+ pcr->done = &trans_done;
+ pcr->trans_result = TRANS_NOT_READY;
+ init_completion(&trans_done);
+ rtsx_pci_writel(pcr, RTSX_HDBAR, pcr->host_sg_tbl_addr);
+ rtsx_pci_writel(pcr, RTSX_HDBCTLR, val);
+
+ spin_unlock_irqrestore(&pcr->lock, flags);
+
+ timeleft = wait_for_completion_interruptible_timeout(
+ &trans_done, msecs_to_jiffies(timeout));
+ if (timeleft <= 0) {
+ dev_dbg(&(pcr->pci->dev), "Timeout (%s %d)\n",
+ __func__, __LINE__);
+ err = -ETIMEDOUT;
+ goto out;
+ }
+
+ spin_lock_irqsave(&pcr->lock, flags);
+
+ if (pcr->trans_result == TRANS_RESULT_FAIL)
+ err = -EINVAL;
+ else if (pcr->trans_result == TRANS_NO_DEVICE)
+ err = -ENODEV;
+
+ spin_unlock_irqrestore(&pcr->lock, flags);
+
+out:
+ spin_lock_irqsave(&pcr->lock, flags);
+ pcr->done = NULL;
+ spin_unlock_irqrestore(&pcr->lock, flags);
+
+ dma_unmap_sg(&(pcr->pci->dev), sglist, num_sg, dma_dir);
+
+ if ((err < 0) && (err != -ENODEV))
+ rtsx_pci_stop_cmd(pcr);
+
+ if (pcr->finish_me)
+ complete(pcr->finish_me);
+
+ return err;
+}
+EXPORT_SYMBOL_GPL(rtsx_pci_transfer_data);
+
+int rtsx_pci_read_ppbuf(struct rtsx_pcr *pcr, u8 *buf, int buf_len)
+{
+ int err;
+ int i, j;
+ u16 reg;
+ u8 *ptr;
+
+ if (buf_len > 512)
+ buf_len = 512;
+
+ ptr = buf;
+ reg = PPBUF_BASE2;
+ for (i = 0; i < buf_len / 256; i++) {
+ rtsx_pci_init_cmd(pcr);
+
+ for (j = 0; j < 256; j++)
+ rtsx_pci_add_cmd(pcr, READ_REG_CMD, reg++, 0, 0);
+
+ err = rtsx_pci_send_cmd(pcr, 250);
+ if (err < 0)
+ return err;
+
+ memcpy(ptr, rtsx_pci_get_cmd_data(pcr), 256);
+ ptr += 256;
+ }
+
+ if (buf_len % 256) {
+ rtsx_pci_init_cmd(pcr);
+
+ for (j = 0; j < buf_len % 256; j++)
+ rtsx_pci_add_cmd(pcr, READ_REG_CMD, reg++, 0, 0);
+
+ err = rtsx_pci_send_cmd(pcr, 250);
+ if (err < 0)
+ return err;
+ }
+
+ memcpy(ptr, rtsx_pci_get_cmd_data(pcr), buf_len % 256);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(rtsx_pci_read_ppbuf);
+
+int rtsx_pci_write_ppbuf(struct rtsx_pcr *pcr, u8 *buf, int buf_len)
+{
+ int err;
+ int i, j;
+ u16 reg;
+ u8 *ptr;
+
+ if (buf_len > 512)
+ buf_len = 512;
+
+ ptr = buf;
+ reg = PPBUF_BASE2;
+ for (i = 0; i < buf_len / 256; i++) {
+ rtsx_pci_init_cmd(pcr);
+
+ for (j = 0; j < 256; j++) {
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD,
+ reg++, 0xFF, *ptr);
+ ptr++;
+ }
+
+ err = rtsx_pci_send_cmd(pcr, 250);
+ if (err < 0)
+ return err;
+ }
+
+ if (buf_len % 256) {
+ rtsx_pci_init_cmd(pcr);
+
+ for (j = 0; j < buf_len % 256; j++) {
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD,
+ reg++, 0xFF, *ptr);
+ ptr++;
+ }
+
+ err = rtsx_pci_send_cmd(pcr, 250);
+ if (err < 0)
+ return err;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(rtsx_pci_write_ppbuf);
+
+static int rtsx_pci_set_pull_ctl(struct rtsx_pcr *pcr, const u32 *tbl)
+{
+ int err;
+
+ rtsx_pci_init_cmd(pcr);
+
+ while (*tbl & 0xFFFF0000) {
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD,
+ (u16)(*tbl >> 16), 0xFF, (u8)(*tbl));
+ tbl++;
+ }
+
+ err = rtsx_pci_send_cmd(pcr, 100);
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+
+int rtsx_pci_card_pull_ctl_enable(struct rtsx_pcr *pcr, int card)
+{
+ const u32 *tbl;
+
+ if (card == RTSX_SD_CARD)
+ tbl = pcr->sd_pull_ctl_enable_tbl;
+ else if (card == RTSX_MS_CARD)
+ tbl = pcr->ms_pull_ctl_enable_tbl;
+ else
+ return -EINVAL;
+
+ return rtsx_pci_set_pull_ctl(pcr, tbl);
+}
+EXPORT_SYMBOL_GPL(rtsx_pci_card_pull_ctl_enable);
+
+int rtsx_pci_card_pull_ctl_disable(struct rtsx_pcr *pcr, int card)
+{
+ const u32 *tbl;
+
+ if (card == RTSX_SD_CARD)
+ tbl = pcr->sd_pull_ctl_disable_tbl;
+ else if (card == RTSX_MS_CARD)
+ tbl = pcr->ms_pull_ctl_disable_tbl;
+ else
+ return -EINVAL;
+
+
+ return rtsx_pci_set_pull_ctl(pcr, tbl);
+}
+EXPORT_SYMBOL_GPL(rtsx_pci_card_pull_ctl_disable);
+
+static void rtsx_pci_enable_bus_int(struct rtsx_pcr *pcr)
+{
+ pcr->bier = TRANS_OK_INT_EN | TRANS_FAIL_INT_EN | SD_INT_EN;
+
+ if (pcr->num_slots > 1)
+ pcr->bier |= MS_INT_EN;
+
+ /* Enable Bus Interrupt */
+ rtsx_pci_writel(pcr, RTSX_BIER, pcr->bier);
+
+ dev_dbg(&(pcr->pci->dev), "RTSX_BIER: 0x%08x\n", pcr->bier);
+}
+
+static inline u8 double_ssc_depth(u8 depth)
+{
+ return ((depth > 1) ? (depth - 1) : depth);
+}
+
+static u8 revise_ssc_depth(u8 ssc_depth, u8 div)
+{
+ if (div > CLK_DIV_1) {
+ if (ssc_depth > (div - 1))
+ ssc_depth -= (div - 1);
+ else
+ ssc_depth = SSC_DEPTH_4M;
+ }
+
+ return ssc_depth;
+}
+
+int rtsx_pci_switch_clock(struct rtsx_pcr *pcr, unsigned int card_clock,
+ u8 ssc_depth, bool initial_mode, bool double_clk, bool vpclk)
+{
+ int err, clk;
+ u8 N, min_N, max_N, clk_divider;
+ u8 mcu_cnt, div, max_div;
+ u8 depth[] = {
+ [RTSX_SSC_DEPTH_4M] = SSC_DEPTH_4M,
+ [RTSX_SSC_DEPTH_2M] = SSC_DEPTH_2M,
+ [RTSX_SSC_DEPTH_1M] = SSC_DEPTH_1M,
+ [RTSX_SSC_DEPTH_500K] = SSC_DEPTH_500K,
+ [RTSX_SSC_DEPTH_250K] = SSC_DEPTH_250K,
+ };
+
+ if (initial_mode) {
+ /* We use 250k(around) here, in initial stage */
+ clk_divider = SD_CLK_DIVIDE_128;
+ card_clock = 30000000;
+ } else {
+ clk_divider = SD_CLK_DIVIDE_0;
+ }
+ err = rtsx_pci_write_register(pcr, SD_CFG1,
+ SD_CLK_DIVIDE_MASK, clk_divider);
+ if (err < 0)
+ return err;
+
+ card_clock /= 1000000;
+ dev_dbg(&(pcr->pci->dev), "Switch card clock to %dMHz\n", card_clock);
+
+ min_N = 80;
+ max_N = 208;
+ max_div = CLK_DIV_8;
+
+ clk = card_clock;
+ if (!initial_mode && double_clk)
+ clk = card_clock * 2;
+ dev_dbg(&(pcr->pci->dev),
+ "Internal SSC clock: %dMHz (cur_clock = %d)\n",
+ clk, pcr->cur_clock);
+
+ if (clk == pcr->cur_clock)
+ return 0;
+
+ N = (u8)(clk - 2);
+ if ((clk <= 2) || (N > max_N))
+ return -EINVAL;
+
+ mcu_cnt = (u8)(125/clk + 3);
+ if (mcu_cnt > 15)
+ mcu_cnt = 15;
+
+ /* Make sure that the SSC clock div_n is equal or greater than min_N */
+ div = CLK_DIV_1;
+ while ((N < min_N) && (div < max_div)) {
+ N = (N + 2) * 2 - 2;
+ div++;
+ }
+ dev_dbg(&(pcr->pci->dev), "N = %d, div = %d\n", N, div);
+
+ ssc_depth = depth[ssc_depth];
+ if (double_clk)
+ ssc_depth = double_ssc_depth(ssc_depth);
+
+ ssc_depth = revise_ssc_depth(ssc_depth, div);
+ dev_dbg(&(pcr->pci->dev), "ssc_depth = %d\n", ssc_depth);
+
+ rtsx_pci_init_cmd(pcr);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CLK_CTL,
+ CLK_LOW_FREQ, CLK_LOW_FREQ);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CLK_DIV,
+ 0xFF, (div << 4) | mcu_cnt);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SSC_CTL1, SSC_RSTB, 0);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SSC_CTL2,
+ SSC_DEPTH_MASK, ssc_depth);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SSC_DIV_N_0, 0xFF, N);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SSC_CTL1, SSC_RSTB, SSC_RSTB);
+ if (vpclk) {
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_VPCLK0_CTL,
+ PHASE_NOT_RESET, 0);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_VPCLK0_CTL,
+ PHASE_NOT_RESET, PHASE_NOT_RESET);
+ }
+
+ err = rtsx_pci_send_cmd(pcr, 2000);
+ if (err < 0)
+ return err;
+
+ /* Wait SSC clock stable */
+ udelay(10);
+ err = rtsx_pci_write_register(pcr, CLK_CTL, CLK_LOW_FREQ, 0);
+ if (err < 0)
+ return err;
+
+ pcr->cur_clock = clk;
+ return 0;
+}
+EXPORT_SYMBOL_GPL(rtsx_pci_switch_clock);
+
+int rtsx_pci_card_power_on(struct rtsx_pcr *pcr, int card)
+{
+ if (pcr->ops->card_power_on)
+ return pcr->ops->card_power_on(pcr, card);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(rtsx_pci_card_power_on);
+
+int rtsx_pci_card_power_off(struct rtsx_pcr *pcr, int card)
+{
+ if (pcr->ops->card_power_off)
+ return pcr->ops->card_power_off(pcr, card);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(rtsx_pci_card_power_off);
+
+unsigned int rtsx_pci_card_exist(struct rtsx_pcr *pcr)
+{
+ unsigned int val;
+
+ val = rtsx_pci_readl(pcr, RTSX_BIPR);
+ if (pcr->ops->cd_deglitch)
+ val = pcr->ops->cd_deglitch(pcr);
+
+ return val;
+}
+EXPORT_SYMBOL_GPL(rtsx_pci_card_exist);
+
+void rtsx_pci_complete_unfinished_transfer(struct rtsx_pcr *pcr)
+{
+ struct completion finish;
+
+ pcr->finish_me = &finish;
+ init_completion(&finish);
+
+ if (pcr->done)
+ complete(pcr->done);
+
+ if (!pcr->remove_pci)
+ rtsx_pci_stop_cmd(pcr);
+
+ wait_for_completion_interruptible_timeout(&finish,
+ msecs_to_jiffies(2));
+ pcr->finish_me = NULL;
+}
+EXPORT_SYMBOL_GPL(rtsx_pci_complete_unfinished_transfer);
+
+static void rtsx_pci_card_detect(struct work_struct *work)
+{
+ struct delayed_work *dwork;
+ struct rtsx_pcr *pcr;
+ unsigned long flags;
+ unsigned int card_detect = 0;
+ u32 irq_status;
+
+ dwork = to_delayed_work(work);
+ pcr = container_of(dwork, struct rtsx_pcr, carddet_work);
+
+ dev_dbg(&(pcr->pci->dev), "--> %s\n", __func__);
+
+ spin_lock_irqsave(&pcr->lock, flags);
+
+ irq_status = rtsx_pci_readl(pcr, RTSX_BIPR);
+ dev_dbg(&(pcr->pci->dev), "irq_status: 0x%08x\n", irq_status);
+
+ if (pcr->card_inserted || pcr->card_removed) {
+ dev_dbg(&(pcr->pci->dev),
+ "card_inserted: 0x%x, card_removed: 0x%x\n",
+ pcr->card_inserted, pcr->card_removed);
+
+ if (pcr->ops->cd_deglitch)
+ pcr->card_inserted = pcr->ops->cd_deglitch(pcr);
+
+ card_detect = pcr->card_inserted | pcr->card_removed;
+ pcr->card_inserted = 0;
+ pcr->card_removed = 0;
+ }
+
+ spin_unlock_irqrestore(&pcr->lock, flags);
+
+ if (card_detect & SD_EXIST)
+ pcr->slots[RTSX_SD_CARD].card_event(
+ pcr->slots[RTSX_SD_CARD].p_dev);
+ if (card_detect & MS_EXIST)
+ pcr->slots[RTSX_MS_CARD].card_event(
+ pcr->slots[RTSX_MS_CARD].p_dev);
+}
+
+static irqreturn_t rtsx_pci_isr(int irq, void *dev_id)
+{
+ struct rtsx_pcr *pcr = dev_id;
+ u32 int_reg;
+
+ if (!pcr)
+ return IRQ_NONE;
+
+ spin_lock(&pcr->lock);
+
+ int_reg = rtsx_pci_readl(pcr, RTSX_BIPR);
+ /* Clear interrupt flag */
+ rtsx_pci_writel(pcr, RTSX_BIPR, int_reg);
+ if ((int_reg & pcr->bier) == 0) {
+ spin_unlock(&pcr->lock);
+ return IRQ_NONE;
+ }
+ if (int_reg == 0xFFFFFFFF) {
+ spin_unlock(&pcr->lock);
+ return IRQ_HANDLED;
+ }
+
+ int_reg &= (pcr->bier | 0x7FFFFF);
+
+ if (int_reg & SD_INT) {
+ if (int_reg & SD_EXIST) {
+ pcr->card_inserted |= SD_EXIST;
+ } else {
+ pcr->card_removed |= SD_EXIST;
+ pcr->card_inserted &= ~SD_EXIST;
+ }
+ }
+
+ if (int_reg & MS_INT) {
+ if (int_reg & MS_EXIST) {
+ pcr->card_inserted |= MS_EXIST;
+ } else {
+ pcr->card_removed |= MS_EXIST;
+ pcr->card_inserted &= ~MS_EXIST;
+ }
+ }
+
+ if (pcr->card_inserted || pcr->card_removed)
+ schedule_delayed_work(&pcr->carddet_work,
+ msecs_to_jiffies(200));
+
+ if (int_reg & (NEED_COMPLETE_INT | DELINK_INT)) {
+ if (int_reg & (TRANS_FAIL_INT | DELINK_INT)) {
+ pcr->trans_result = TRANS_RESULT_FAIL;
+ if (pcr->done)
+ complete(pcr->done);
+ } else if (int_reg & TRANS_OK_INT) {
+ pcr->trans_result = TRANS_RESULT_OK;
+ if (pcr->done)
+ complete(pcr->done);
+ }
+ }
+
+ spin_unlock(&pcr->lock);
+ return IRQ_HANDLED;
+}
+
+static int rtsx_pci_acquire_irq(struct rtsx_pcr *pcr)
+{
+ dev_info(&(pcr->pci->dev), "%s: pcr->msi_en = %d, pci->irq = %d\n",
+ __func__, pcr->msi_en, pcr->pci->irq);
+
+ if (request_irq(pcr->pci->irq, rtsx_pci_isr,
+ pcr->msi_en ? 0 : IRQF_SHARED,
+ DRV_NAME_RTSX_PCI, pcr)) {
+ dev_err(&(pcr->pci->dev),
+ "rtsx_sdmmc: unable to grab IRQ %d, disabling device\n",
+ pcr->pci->irq);
+ return -1;
+ }
+
+ pcr->irq = pcr->pci->irq;
+ pci_intx(pcr->pci, !pcr->msi_en);
+
+ return 0;
+}
+
+static void rtsx_pci_idle_work(struct work_struct *work)
+{
+ struct delayed_work *dwork = to_delayed_work(work);
+ struct rtsx_pcr *pcr = container_of(dwork, struct rtsx_pcr, idle_work);
+
+ dev_dbg(&(pcr->pci->dev), "--> %s\n", __func__);
+
+ mutex_lock(&pcr->pcr_mutex);
+
+ pcr->state = PDEV_STAT_IDLE;
+
+ if (pcr->ops->disable_auto_blink)
+ pcr->ops->disable_auto_blink(pcr);
+ if (pcr->ops->turn_off_led)
+ pcr->ops->turn_off_led(pcr);
+
+ mutex_unlock(&pcr->pcr_mutex);
+}
+
+static int rtsx_pci_init_hw(struct rtsx_pcr *pcr)
+{
+ int err;
+
+ rtsx_pci_writel(pcr, RTSX_HCBAR, pcr->host_cmds_addr);
+
+ rtsx_pci_enable_bus_int(pcr);
+
+ /* Power on SSC */
+ err = rtsx_pci_write_register(pcr, FPDCTL, SSC_POWER_DOWN, 0);
+ if (err < 0)
+ return err;
+
+ /* Wait SSC power stable */
+ udelay(200);
+
+ if (pcr->ops->optimize_phy) {
+ err = pcr->ops->optimize_phy(pcr);
+ if (err < 0)
+ return err;
+ }
+
+ rtsx_pci_init_cmd(pcr);
+
+ /* Set mcu_cnt to 7 to ensure data can be sampled properly */
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CLK_DIV, 0x07, 0x07);
+
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, HOST_SLEEP_STATE, 0x03, 0x00);
+ /* Disable card clock */
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_CLK_EN, 0x1E, 0);
+ /* Reset ASPM state to default value */
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, ASPM_FORCE_CTL, 0x3F, 0);
+ /* Reset delink mode */
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CHANGE_LINK_STATE, 0x0A, 0);
+ /* Card driving select */
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD30_DRIVE_SEL,
+ 0x07, DRIVER_TYPE_D);
+ /* Enable SSC Clock */
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SSC_CTL1,
+ 0xFF, SSC_8X_EN | SSC_SEL_4M);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SSC_CTL2, 0xFF, 0x12);
+ /* Disable cd_pwr_save */
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CHANGE_LINK_STATE, 0x16, 0x10);
+ /* Clear Link Ready Interrupt */
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, IRQSTAT0,
+ LINK_RDY_INT, LINK_RDY_INT);
+ /* Enlarge the estimation window of PERST# glitch
+ * to reduce the chance of invalid card interrupt
+ */
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PERST_GLITCH_WIDTH, 0xFF, 0x80);
+ /* Update RC oscillator to 400k
+ * bit[0] F_HIGH: for RC oscillator, Rst_value is 1'b1
+ * 1: 2M 0: 400k
+ */
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, RCCTL, 0x01, 0x00);
+ /* Set interrupt write clear
+ * bit 1: U_elbi_if_rd_clr_en
+ * 1: Enable ELBI interrupt[31:22] & [7:0] flag read clear
+ * 0: ELBI interrupt flag[31:22] & [7:0] only can be write clear
+ */
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, NFTS_TX_CTRL, 0x02, 0);
+ /* Force CLKREQ# PIN to drive 0 to request clock */
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PETXCFG, 0x08, 0x08);
+
+ err = rtsx_pci_send_cmd(pcr, 100);
+ if (err < 0)
+ return err;
+
+ /* Enable clk_request_n to enable clock power management */
+ rtsx_pci_write_config_byte(pcr, 0x81, 1);
+ /* Enter L1 when host tx idle */
+ rtsx_pci_write_config_byte(pcr, 0x70F, 0x5B);
+
+ if (pcr->ops->extra_init_hw) {
+ err = pcr->ops->extra_init_hw(pcr);
+ if (err < 0)
+ return err;
+ }
+
+ return 0;
+}
+
+static int rtsx_pci_init_chip(struct rtsx_pcr *pcr)
+{
+ int err;
+
+ spin_lock_init(&pcr->lock);
+ mutex_init(&pcr->pcr_mutex);
+
+ switch (PCI_PID(pcr)) {
+ default:
+ case 0x5209:
+ rts5209_init_params(pcr);
+ break;
+
+ case 0x5229:
+ rts5229_init_params(pcr);
+ break;
+
+ case 0x5289:
+ rtl8411_init_params(pcr);
+ break;
+ }
+
+ dev_dbg(&(pcr->pci->dev), "PID: 0x%04x, IC version: 0x%02x\n",
+ PCI_PID(pcr), pcr->ic_version);
+
+ pcr->slots = kcalloc(pcr->num_slots, sizeof(struct rtsx_slot),
+ GFP_KERNEL);
+ if (!pcr->slots)
+ return -ENOMEM;
+
+ pcr->state = PDEV_STAT_IDLE;
+ err = rtsx_pci_init_hw(pcr);
+ if (err < 0) {
+ kfree(pcr->slots);
+ return err;
+ }
+
+ return 0;
+}
+
+static int __devinit rtsx_pci_probe(struct pci_dev *pcidev,
+ const struct pci_device_id *id)
+{
+ struct rtsx_pcr *pcr;
+ struct pcr_handle *handle;
+ u32 base, len;
+ int ret, i;
+
+ dev_dbg(&(pcidev->dev),
+ ": Realtek PCI-E Card Reader found at %s [%04x:%04x] (rev %x)\n",
+ pci_name(pcidev), (int)pcidev->vendor, (int)pcidev->device,
+ (int)pcidev->revision);
+
+ ret = pci_enable_device(pcidev);
+ if (ret)
+ return ret;
+
+ ret = pci_request_regions(pcidev, DRV_NAME_RTSX_PCI);
+ if (ret)
+ goto disable;
+
+ pcr = kzalloc(sizeof(*pcr), GFP_KERNEL);
+ if (!pcr) {
+ ret = -ENOMEM;
+ goto release_pci;
+ }
+
+ handle = kzalloc(sizeof(*handle), GFP_KERNEL);
+ if (!handle) {
+ ret = -ENOMEM;
+ goto free_pcr;
+ }
+ handle->pcr = pcr;
+
+ if (!idr_pre_get(&rtsx_pci_idr, GFP_KERNEL)) {
+ ret = -ENOMEM;
+ goto free_handle;
+ }
+
+ spin_lock(&rtsx_pci_lock);
+ ret = idr_get_new(&rtsx_pci_idr, pcr, &pcr->id);
+ spin_unlock(&rtsx_pci_lock);
+ if (ret)
+ goto free_handle;
+
+ pcr->pci = pcidev;
+ dev_set_drvdata(&pcidev->dev, handle);
+
+ len = pci_resource_len(pcidev, 0);
+ base = pci_resource_start(pcidev, 0);
+ pcr->remap_addr = ioremap_nocache(base, len);
+ if (!pcr->remap_addr) {
+ ret = -ENOMEM;
+ goto free_host;
+ }
+
+ pcr->rtsx_resv_buf = dma_alloc_coherent(&(pcidev->dev),
+ RTSX_RESV_BUF_LEN, &(pcr->rtsx_resv_buf_addr),
+ GFP_KERNEL);
+ if (pcr->rtsx_resv_buf == NULL) {
+ ret = -ENXIO;
+ goto unmap;
+ }
+ pcr->host_cmds_ptr = pcr->rtsx_resv_buf;
+ pcr->host_cmds_addr = pcr->rtsx_resv_buf_addr;
+ pcr->host_sg_tbl_ptr = pcr->rtsx_resv_buf + HOST_CMDS_BUF_LEN;
+ pcr->host_sg_tbl_addr = pcr->rtsx_resv_buf_addr + HOST_CMDS_BUF_LEN;
+
+ pcr->card_inserted = 0;
+ pcr->card_removed = 0;
+ INIT_DELAYED_WORK(&pcr->carddet_work, rtsx_pci_card_detect);
+ INIT_DELAYED_WORK(&pcr->idle_work, rtsx_pci_idle_work);
+
+ pcr->msi_en = msi_en;
+ if (pcr->msi_en) {
+ ret = pci_enable_msi(pcidev);
+ if (ret < 0)
+ pcr->msi_en = false;
+ }
+
+ ret = rtsx_pci_acquire_irq(pcr);
+ if (ret < 0)
+ goto free_dma;
+
+ pci_set_master(pcidev);
+ synchronize_irq(pcr->irq);
+
+ ret = rtsx_pci_init_chip(pcr);
+ if (ret < 0)
+ goto disable_irq;
+
+ for (i = 0; i < ARRAY_SIZE(rtsx_pcr_cells); i++) {
+ rtsx_pcr_cells[i].platform_data = handle;
+ rtsx_pcr_cells[i].pdata_size = sizeof(*handle);
+ }
+ ret = mfd_add_devices(&pcidev->dev, pcr->id, rtsx_pcr_cells,
+ ARRAY_SIZE(rtsx_pcr_cells), NULL, 0, NULL);
+ if (ret < 0)
+ goto disable_irq;
+
+ schedule_delayed_work(&pcr->idle_work, msecs_to_jiffies(200));
+
+ return 0;
+
+disable_irq:
+ free_irq(pcr->irq, (void *)pcr);
+free_dma:
+ dma_free_coherent(&(pcr->pci->dev), RTSX_RESV_BUF_LEN,
+ pcr->rtsx_resv_buf, pcr->rtsx_resv_buf_addr);
+unmap:
+ iounmap(pcr->remap_addr);
+free_host:
+ dev_set_drvdata(&pcidev->dev, NULL);
+free_handle:
+ kfree(handle);
+free_pcr:
+ kfree(pcr);
+release_pci:
+ pci_release_regions(pcidev);
+disable:
+ pci_disable_device(pcidev);
+
+ return ret;
+}
+
+static void __devexit rtsx_pci_remove(struct pci_dev *pcidev)
+{
+ struct pcr_handle *handle = pci_get_drvdata(pcidev);
+ struct rtsx_pcr *pcr = handle->pcr;
+
+ pcr->remove_pci = true;
+
+ cancel_delayed_work(&pcr->carddet_work);
+ cancel_delayed_work(&pcr->idle_work);
+
+ mfd_remove_devices(&pcidev->dev);
+
+ dma_free_coherent(&(pcr->pci->dev), RTSX_RESV_BUF_LEN,
+ pcr->rtsx_resv_buf, pcr->rtsx_resv_buf_addr);
+ free_irq(pcr->irq, (void *)pcr);
+ if (pcr->msi_en)
+ pci_disable_msi(pcr->pci);
+ iounmap(pcr->remap_addr);
+
+ dev_set_drvdata(&pcidev->dev, NULL);
+ pci_release_regions(pcidev);
+ pci_disable_device(pcidev);
+
+ spin_lock(&rtsx_pci_lock);
+ idr_remove(&rtsx_pci_idr, pcr->id);
+ spin_unlock(&rtsx_pci_lock);
+
+ kfree(pcr->slots);
+ kfree(pcr);
+ kfree(handle);
+
+ dev_dbg(&(pcidev->dev),
+ ": Realtek PCI-E Card Reader at %s [%04x:%04x] has been removed\n",
+ pci_name(pcidev), (int)pcidev->vendor, (int)pcidev->device);
+}
+
+#ifdef CONFIG_PM
+
+static int rtsx_pci_suspend(struct pci_dev *pcidev, pm_message_t state)
+{
+ struct pcr_handle *handle;
+ struct rtsx_pcr *pcr;
+ int ret = 0;
+
+ dev_dbg(&(pcidev->dev), "--> %s\n", __func__);
+
+ handle = pci_get_drvdata(pcidev);
+ pcr = handle->pcr;
+
+ cancel_delayed_work(&pcr->carddet_work);
+ cancel_delayed_work(&pcr->idle_work);
+
+ mutex_lock(&pcr->pcr_mutex);
+
+ if (pcr->ops->turn_off_led)
+ pcr->ops->turn_off_led(pcr);
+
+ rtsx_pci_writel(pcr, RTSX_BIER, 0);
+ pcr->bier = 0;
+
+ rtsx_pci_write_register(pcr, PETXCFG, 0x08, 0x08);
+ rtsx_pci_write_register(pcr, HOST_SLEEP_STATE, 0x03, 0x02);
+
+ pci_save_state(pcidev);
+ pci_enable_wake(pcidev, pci_choose_state(pcidev, state), 0);
+ pci_disable_device(pcidev);
+ pci_set_power_state(pcidev, pci_choose_state(pcidev, state));
+
+ mutex_unlock(&pcr->pcr_mutex);
+ return ret;
+}
+
+static int rtsx_pci_resume(struct pci_dev *pcidev)
+{
+ struct pcr_handle *handle;
+ struct rtsx_pcr *pcr;
+ int ret = 0;
+
+ dev_dbg(&(pcidev->dev), "--> %s\n", __func__);
+
+ handle = pci_get_drvdata(pcidev);
+ pcr = handle->pcr;
+
+ mutex_lock(&pcr->pcr_mutex);
+
+ pci_set_power_state(pcidev, PCI_D0);
+ pci_restore_state(pcidev);
+ ret = pci_enable_device(pcidev);
+ if (ret)
+ goto out;
+ pci_set_master(pcidev);
+
+ ret = rtsx_pci_write_register(pcr, HOST_SLEEP_STATE, 0x03, 0x00);
+ if (ret)
+ goto out;
+
+ ret = rtsx_pci_init_hw(pcr);
+ if (ret)
+ goto out;
+
+ schedule_delayed_work(&pcr->idle_work, msecs_to_jiffies(200));
+
+out:
+ mutex_unlock(&pcr->pcr_mutex);
+ return ret;
+}
+
+#else /* CONFIG_PM */
+
+#define rtsx_pci_suspend NULL
+#define rtsx_pci_resume NULL
+
+#endif /* CONFIG_PM */
+
+static struct pci_driver rtsx_pci_driver = {
+ .name = DRV_NAME_RTSX_PCI,
+ .id_table = rtsx_pci_ids,
+ .probe = rtsx_pci_probe,
+ .remove = __devexit_p(rtsx_pci_remove),
+ .suspend = rtsx_pci_suspend,
+ .resume = rtsx_pci_resume,
+};
+module_pci_driver(rtsx_pci_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Wei WANG <wei_wang@realsil.com.cn>");
+MODULE_DESCRIPTION("Realtek PCI-E Card Reader Driver");
diff --git a/drivers/staging/rts_pstor/general.h b/drivers/mfd/rtsx_pcr.h
similarity index 75%
rename from drivers/staging/rts_pstor/general.h
rename to drivers/mfd/rtsx_pcr.h
index f17930d..12462c1 100644
--- a/drivers/staging/rts_pstor/general.h
+++ b/drivers/mfd/rtsx_pcr.h
@@ -1,5 +1,4 @@
/* Driver for Realtek PCI-Express card reader
- * Header file
*
* Copyright(c) 2009 Realtek Semiconductor Corp. All rights reserved.
*
@@ -17,15 +16,17 @@
* with this program; if not, see <http://www.gnu.org/licenses/>.
*
* Author:
- * wwang (wei_wang@realsil.com.cn)
+ * Wei WANG <wei_wang@realsil.com.cn>
* No. 450, Shenhu Road, Suzhou Industry Park, Suzhou, China
*/
-#ifndef __RTSX_GENERAL_H
-#define __RTSX_GENERAL_H
+#ifndef __RTSX_PCR_H
+#define __RTSX_PCR_H
-#include "rtsx.h"
+#include <linux/mfd/rtsx_pci.h>
-int bit1cnt_long(u32 data);
+void rts5209_init_params(struct rtsx_pcr *pcr);
+void rts5229_init_params(struct rtsx_pcr *pcr);
+void rtl8411_init_params(struct rtsx_pcr *pcr);
-#endif /* __RTSX_GENERAL_H */
+#endif
diff --git a/drivers/mfd/sm501.c b/drivers/mfd/sm501.c
index d927dd4..9816c23 100644
--- a/drivers/mfd/sm501.c
+++ b/drivers/mfd/sm501.c
@@ -1014,7 +1014,7 @@
.get = sm501_gpio_get,
};
-static int __devinit sm501_gpio_register_chip(struct sm501_devdata *sm,
+static int sm501_gpio_register_chip(struct sm501_devdata *sm,
struct sm501_gpio *gpio,
struct sm501_gpio_chip *chip)
{
@@ -1042,7 +1042,7 @@
return gpiochip_add(gchip);
}
-static int __devinit sm501_register_gpio(struct sm501_devdata *sm)
+static int sm501_register_gpio(struct sm501_devdata *sm)
{
struct sm501_gpio *gpio = &sm->gpio;
resource_size_t iobase = sm->io_res->start + SM501_GPIO;
@@ -1313,7 +1313,7 @@
* Common init code for an SM501
*/
-static int __devinit sm501_init_dev(struct sm501_devdata *sm)
+static int sm501_init_dev(struct sm501_devdata *sm)
{
struct sm501_initdata *idata;
struct sm501_platdata *pdata;
@@ -1389,7 +1389,7 @@
return 0;
}
-static int __devinit sm501_plat_probe(struct platform_device *dev)
+static int sm501_plat_probe(struct platform_device *dev)
{
struct sm501_devdata *sm;
int ret;
@@ -1578,7 +1578,7 @@
.gpio_base = -1,
};
-static int __devinit sm501_pci_probe(struct pci_dev *dev,
+static int sm501_pci_probe(struct pci_dev *dev,
const struct pci_device_id *id)
{
struct sm501_devdata *sm;
@@ -1685,7 +1685,7 @@
sm501_gpio_remove(sm);
}
-static void __devexit sm501_pci_remove(struct pci_dev *dev)
+static void sm501_pci_remove(struct pci_dev *dev)
{
struct sm501_devdata *sm = pci_get_drvdata(dev);
@@ -1723,12 +1723,12 @@
.name = "sm501",
.id_table = sm501_pci_tbl,
.probe = sm501_pci_probe,
- .remove = __devexit_p(sm501_pci_remove),
+ .remove = sm501_pci_remove,
};
MODULE_ALIAS("platform:sm501");
-static struct of_device_id __devinitdata of_sm501_match_tbl[] = {
+static struct of_device_id of_sm501_match_tbl[] = {
{ .compatible = "smi,sm501", },
{ /* end */ }
};
diff --git a/drivers/mfd/sta2x11-mfd.c b/drivers/mfd/sta2x11-mfd.c
index d35da68..d6284ca 100644
--- a/drivers/mfd/sta2x11-mfd.c
+++ b/drivers/mfd/sta2x11-mfd.c
@@ -69,7 +69,7 @@
return NULL;
}
-static int __devinit sta2x11_mfd_add(struct pci_dev *pdev, gfp_t flags)
+static int sta2x11_mfd_add(struct pci_dev *pdev, gfp_t flags)
{
struct sta2x11_mfd *mfd = sta2x11_mfd_find(pdev);
struct sta2x11_instance *instance;
@@ -89,7 +89,7 @@
return 0;
}
-static int __devexit mfd_remove(struct pci_dev *pdev)
+static int mfd_remove(struct pci_dev *pdev)
{
struct sta2x11_mfd *mfd = sta2x11_mfd_find(pdev);
@@ -305,7 +305,7 @@
.flags = IORESOURCE_MEM, \
}
-static const __devinitconst struct resource gpio_resources[] = {
+static const struct resource gpio_resources[] = {
{
.name = "sta2x11_gpio", /* 4 consecutive cells, 1 driver */
.start = 0,
@@ -313,31 +313,31 @@
.flags = IORESOURCE_MEM,
}
};
-static const __devinitconst struct resource sctl_resources[] = {
+static const struct resource sctl_resources[] = {
CELL_4K("sta2x11-sctl", STA2X11_SCTL),
};
-static const __devinitconst struct resource scr_resources[] = {
+static const struct resource scr_resources[] = {
CELL_4K("sta2x11-scr", STA2X11_SCR),
};
-static const __devinitconst struct resource time_resources[] = {
+static const struct resource time_resources[] = {
CELL_4K("sta2x11-time", STA2X11_TIME),
};
-static const __devinitconst struct resource apbreg_resources[] = {
+static const struct resource apbreg_resources[] = {
CELL_4K("sta2x11-apbreg", STA2X11_APBREG),
};
#define DEV(_name, _r) \
{ .name = _name, .num_resources = ARRAY_SIZE(_r), .resources = _r, }
-static __devinitdata struct mfd_cell sta2x11_mfd_bar0[] = {
+static struct mfd_cell sta2x11_mfd_bar0[] = {
DEV("sta2x11-gpio", gpio_resources), /* offset 0: we add pdata later */
DEV("sta2x11-sctl", sctl_resources),
DEV("sta2x11-scr", scr_resources),
DEV("sta2x11-time", time_resources),
};
-static __devinitdata struct mfd_cell sta2x11_mfd_bar1[] = {
+static struct mfd_cell sta2x11_mfd_bar1[] = {
DEV("sta2x11-apbreg", apbreg_resources),
};
@@ -363,7 +363,7 @@
return 0;
}
-static int __devinit sta2x11_mfd_probe(struct pci_dev *pdev,
+static int sta2x11_mfd_probe(struct pci_dev *pdev,
const struct pci_device_id *pci_id)
{
int err, i;
diff --git a/drivers/mfd/stmpe-i2c.c b/drivers/mfd/stmpe-i2c.c
index 947a06a..36df187 100644
--- a/drivers/mfd/stmpe-i2c.c
+++ b/drivers/mfd/stmpe-i2c.c
@@ -52,7 +52,7 @@
.write_block = i2c_block_write,
};
-static int __devinit
+static int
stmpe_i2c_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
{
i2c_ci.data = (void *)id;
@@ -63,7 +63,7 @@
return stmpe_probe(&i2c_ci, id->driver_data);
}
-static int __devexit stmpe_i2c_remove(struct i2c_client *i2c)
+static int stmpe_i2c_remove(struct i2c_client *i2c)
{
struct stmpe *stmpe = dev_get_drvdata(&i2c->dev);
@@ -88,7 +88,7 @@
.driver.pm = &stmpe_dev_pm_ops,
#endif
.probe = stmpe_i2c_probe,
- .remove = __devexit_p(stmpe_i2c_remove),
+ .remove = stmpe_i2c_remove,
.id_table = stmpe_i2c_id,
};
diff --git a/drivers/mfd/stmpe-spi.c b/drivers/mfd/stmpe-spi.c
index 9edfe86..973659f 100644
--- a/drivers/mfd/stmpe-spi.c
+++ b/drivers/mfd/stmpe-spi.c
@@ -82,7 +82,7 @@
.init = spi_init,
};
-static int __devinit
+static int
stmpe_spi_probe(struct spi_device *spi)
{
const struct spi_device_id *id = spi_get_device_id(spi);
@@ -101,7 +101,7 @@
return stmpe_probe(&spi_ci, id->driver_data);
}
-static int __devexit stmpe_spi_remove(struct spi_device *spi)
+static int stmpe_spi_remove(struct spi_device *spi)
{
struct stmpe *stmpe = dev_get_drvdata(&spi->dev);
@@ -128,7 +128,7 @@
#endif
},
.probe = stmpe_spi_probe,
- .remove = __devexit_p(stmpe_spi_remove),
+ .remove = stmpe_spi_remove,
.id_table = stmpe_spi_id,
};
diff --git a/drivers/mfd/stmpe.c b/drivers/mfd/stmpe.c
index c94f521..79e88d1 100644
--- a/drivers/mfd/stmpe.c
+++ b/drivers/mfd/stmpe.c
@@ -294,12 +294,14 @@
static struct mfd_cell stmpe_gpio_cell = {
.name = "stmpe-gpio",
+ .of_compatible = "st,stmpe-gpio",
.resources = stmpe_gpio_resources,
.num_resources = ARRAY_SIZE(stmpe_gpio_resources),
};
static struct mfd_cell stmpe_gpio_cell_noirq = {
.name = "stmpe-gpio",
+ .of_compatible = "st,stmpe-gpio",
/* gpio cell resources consist of an irq only so no resources here */
};
diff --git a/drivers/mfd/syscon.c b/drivers/mfd/syscon.c
index 65fe609..3f10591 100644
--- a/drivers/mfd/syscon.c
+++ b/drivers/mfd/syscon.c
@@ -97,7 +97,7 @@
.reg_stride = 4,
};
-static int __devinit syscon_probe(struct platform_device *pdev)
+static int syscon_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct device_node *np = dev->of_node;
@@ -138,7 +138,7 @@
return 0;
}
-static int __devexit syscon_remove(struct platform_device *pdev)
+static int syscon_remove(struct platform_device *pdev)
{
struct syscon *syscon;
@@ -156,7 +156,7 @@
.of_match_table = of_syscon_match,
},
.probe = syscon_probe,
- .remove = __devexit_p(syscon_remove),
+ .remove = syscon_remove,
};
static int __init syscon_init(void)
diff --git a/drivers/mfd/tc3589x.c b/drivers/mfd/tc3589x.c
index 8f4c853..a06d66b 100644
--- a/drivers/mfd/tc3589x.c
+++ b/drivers/mfd/tc3589x.c
@@ -282,7 +282,7 @@
return tc3589x_reg_write(tc3589x, TC3589x_RSTINTCLR, 0x1);
}
-static int __devinit tc3589x_device_init(struct tc3589x *tc3589x)
+static int tc3589x_device_init(struct tc3589x *tc3589x)
{
int ret = 0;
unsigned int blocks = tc3589x->pdata->block;
@@ -329,7 +329,7 @@
return 0;
}
-static int __devinit tc3589x_probe(struct i2c_client *i2c,
+static int tc3589x_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
struct tc3589x_platform_data *pdata = i2c->dev.platform_data;
@@ -402,7 +402,7 @@
return ret;
}
-static int __devexit tc3589x_remove(struct i2c_client *client)
+static int tc3589x_remove(struct i2c_client *client)
{
struct tc3589x *tc3589x = i2c_get_clientdata(client);
@@ -458,7 +458,7 @@
.driver.owner = THIS_MODULE,
.driver.pm = &tc3589x_dev_pm_ops,
.probe = tc3589x_probe,
- .remove = __devexit_p(tc3589x_remove),
+ .remove = tc3589x_remove,
.id_table = tc3589x_id,
};
diff --git a/drivers/mfd/tc6387xb.c b/drivers/mfd/tc6387xb.c
index 413c891..366f7b90 100644
--- a/drivers/mfd/tc6387xb.c
+++ b/drivers/mfd/tc6387xb.c
@@ -138,7 +138,7 @@
},
};
-static int __devinit tc6387xb_probe(struct platform_device *dev)
+static int tc6387xb_probe(struct platform_device *dev)
{
struct tc6387xb_platform_data *pdata = dev->dev.platform_data;
struct resource *iomem, *rscr;
@@ -208,7 +208,7 @@
return ret;
}
-static int __devexit tc6387xb_remove(struct platform_device *dev)
+static int tc6387xb_remove(struct platform_device *dev)
{
struct tc6387xb *tc6387xb = platform_get_drvdata(dev);
@@ -229,7 +229,7 @@
.name = "tc6387xb",
},
.probe = tc6387xb_probe,
- .remove = __devexit_p(tc6387xb_remove),
+ .remove = tc6387xb_remove,
.suspend = tc6387xb_suspend,
.resume = tc6387xb_resume,
};
diff --git a/drivers/mfd/tc6393xb.c b/drivers/mfd/tc6393xb.c
index dcab026..15e1463 100644
--- a/drivers/mfd/tc6393xb.c
+++ b/drivers/mfd/tc6393xb.c
@@ -137,7 +137,7 @@
return 0;
}
-static struct resource __devinitdata tc6393xb_nand_resources[] = {
+static struct resource tc6393xb_nand_resources[] = {
{
.start = 0x1000,
.end = 0x1007,
@@ -196,7 +196,7 @@
},
};
-static struct resource __devinitdata tc6393xb_fb_resources[] = {
+static struct resource tc6393xb_fb_resources[] = {
{
.start = 0x5000,
.end = 0x51ff,
@@ -382,7 +382,7 @@
.set_clk_div = tc6393xb_mmc_clk_div,
};
-static struct mfd_cell __devinitdata tc6393xb_cells[] = {
+static struct mfd_cell tc6393xb_cells[] = {
[TC6393XB_CELL_NAND] = {
.name = "tmio-nand",
.enable = tc6393xb_nand_enable,
@@ -602,7 +602,7 @@
/*--------------------------------------------------------------------------*/
-static int __devinit tc6393xb_probe(struct platform_device *dev)
+static int tc6393xb_probe(struct platform_device *dev)
{
struct tc6393xb_platform_data *tcpd = dev->dev.platform_data;
struct tc6393xb *tc6393xb;
@@ -731,7 +731,7 @@
return ret;
}
-static int __devexit tc6393xb_remove(struct platform_device *dev)
+static int tc6393xb_remove(struct platform_device *dev)
{
struct tc6393xb_platform_data *tcpd = dev->dev.platform_data;
struct tc6393xb *tc6393xb = platform_get_drvdata(dev);
@@ -831,7 +831,7 @@
static struct platform_driver tc6393xb_driver = {
.probe = tc6393xb_probe,
- .remove = __devexit_p(tc6393xb_remove),
+ .remove = tc6393xb_remove,
.suspend = tc6393xb_suspend,
.resume = tc6393xb_resume,
diff --git a/drivers/mfd/ti-ssp.c b/drivers/mfd/ti-ssp.c
index 7c3675a..09a14ce 100644
--- a/drivers/mfd/ti-ssp.c
+++ b/drivers/mfd/ti-ssp.c
@@ -315,7 +315,7 @@
return IRQ_HANDLED;
}
-static int __devinit ti_ssp_probe(struct platform_device *pdev)
+static int ti_ssp_probe(struct platform_device *pdev)
{
static struct ti_ssp *ssp;
const struct ti_ssp_data *pdata = pdev->dev.platform_data;
@@ -433,7 +433,7 @@
return error;
}
-static int __devexit ti_ssp_remove(struct platform_device *pdev)
+static int ti_ssp_remove(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct ti_ssp *ssp = dev_get_drvdata(dev);
@@ -451,7 +451,7 @@
static struct platform_driver ti_ssp_driver = {
.probe = ti_ssp_probe,
- .remove = __devexit_p(ti_ssp_remove),
+ .remove = ti_ssp_remove,
.driver = {
.name = "ti-ssp",
.owner = THIS_MODULE,
diff --git a/drivers/mfd/timberdale.c b/drivers/mfd/timberdale.c
index cccc626..59e0ee2 100644
--- a/drivers/mfd/timberdale.c
+++ b/drivers/mfd/timberdale.c
@@ -75,13 +75,13 @@
},
};
-static __devinitdata struct xiic_i2c_platform_data
+static struct xiic_i2c_platform_data
timberdale_xiic_platform_data = {
.devices = timberdale_i2c_board_info,
.num_devices = ARRAY_SIZE(timberdale_i2c_board_info)
};
-static __devinitdata struct ocores_i2c_platform_data
+static struct ocores_i2c_platform_data
timberdale_ocores_platform_data = {
.reg_shift = 2,
.clock_khz = 62500,
@@ -89,7 +89,7 @@
.num_devices = ARRAY_SIZE(timberdale_i2c_board_info)
};
-static const __devinitconst struct resource timberdale_xiic_resources[] = {
+static const struct resource timberdale_xiic_resources[] = {
{
.start = XIICOFFSET,
.end = XIICEND,
@@ -102,7 +102,7 @@
},
};
-static const __devinitconst struct resource timberdale_ocores_resources[] = {
+static const struct resource timberdale_ocores_resources[] = {
{
.start = OCORESOFFSET,
.end = OCORESEND,
@@ -143,7 +143,7 @@
},
};
-static __devinitdata struct xspi_platform_data timberdale_xspi_platform_data = {
+static struct xspi_platform_data timberdale_xspi_platform_data = {
.num_chipselect = 3,
.little_endian = true,
/* bits per word and devices will be filled in runtime depending
@@ -151,7 +151,7 @@
*/
};
-static const __devinitconst struct resource timberdale_spi_resources[] = {
+static const struct resource timberdale_spi_resources[] = {
{
.start = SPIOFFSET,
.end = SPIEND,
@@ -164,13 +164,13 @@
},
};
-static __devinitdata struct ks8842_platform_data
+static struct ks8842_platform_data
timberdale_ks8842_platform_data = {
.rx_dma_channel = DMA_ETH_RX,
.tx_dma_channel = DMA_ETH_TX
};
-static const __devinitconst struct resource timberdale_eth_resources[] = {
+static const struct resource timberdale_eth_resources[] = {
{
.start = ETHOFFSET,
.end = ETHEND,
@@ -183,14 +183,14 @@
},
};
-static __devinitdata struct timbgpio_platform_data
+static struct timbgpio_platform_data
timberdale_gpio_platform_data = {
.gpio_base = 0,
.nr_pins = GPIO_NR_PINS,
.irq_base = 200,
};
-static const __devinitconst struct resource timberdale_gpio_resources[] = {
+static const struct resource timberdale_gpio_resources[] = {
{
.start = GPIOOFFSET,
.end = GPIOEND,
@@ -203,7 +203,7 @@
},
};
-static const __devinitconst struct resource timberdale_mlogicore_resources[] = {
+static const struct resource timberdale_mlogicore_resources[] = {
{
.start = MLCOREOFFSET,
.end = MLCOREEND,
@@ -221,7 +221,7 @@
},
};
-static const __devinitconst struct resource timberdale_uart_resources[] = {
+static const struct resource timberdale_uart_resources[] = {
{
.start = UARTOFFSET,
.end = UARTEND,
@@ -234,7 +234,7 @@
},
};
-static const __devinitconst struct resource timberdale_uartlite_resources[] = {
+static const struct resource timberdale_uartlite_resources[] = {
{
.start = UARTLITEOFFSET,
.end = UARTLITEEND,
@@ -247,13 +247,13 @@
},
};
-static __devinitdata struct i2c_board_info timberdale_adv7180_i2c_board_info = {
+static struct i2c_board_info timberdale_adv7180_i2c_board_info = {
/* Requires jumper JP9 to be off */
I2C_BOARD_INFO("adv7180", 0x42 >> 1),
.irq = IRQ_TIMBERDALE_ADV7180
};
-static __devinitdata struct timb_video_platform_data
+static struct timb_video_platform_data
timberdale_video_platform_data = {
.dma_channel = DMA_VIDEO_RX,
.i2c_adapter = 0,
@@ -262,7 +262,7 @@
}
};
-static const __devinitconst struct resource
+static const struct resource
timberdale_radio_resources[] = {
{
.start = RDSOFFSET,
@@ -276,22 +276,22 @@
},
};
-static __devinitdata struct i2c_board_info timberdale_tef6868_i2c_board_info = {
+static struct i2c_board_info timberdale_tef6868_i2c_board_info = {
I2C_BOARD_INFO("tef6862", 0x60)
};
-static __devinitdata struct i2c_board_info timberdale_saa7706_i2c_board_info = {
+static struct i2c_board_info timberdale_saa7706_i2c_board_info = {
I2C_BOARD_INFO("saa7706h", 0x1C)
};
-static __devinitdata struct timb_radio_platform_data
+static struct timb_radio_platform_data
timberdale_radio_platform_data = {
.i2c_adapter = 0,
.tuner = &timberdale_tef6868_i2c_board_info,
.dsp = &timberdale_saa7706_i2c_board_info
};
-static const __devinitconst struct resource timberdale_video_resources[] = {
+static const struct resource timberdale_video_resources[] = {
{
.start = LOGIWOFFSET,
.end = LOGIWEND,
@@ -303,7 +303,7 @@
*/
};
-static __devinitdata struct timb_dma_platform_data timb_dma_platform_data = {
+static struct timb_dma_platform_data timb_dma_platform_data = {
.nr_channels = 10,
.channels = {
{
@@ -362,7 +362,7 @@
}
};
-static const __devinitconst struct resource timberdale_dma_resources[] = {
+static const struct resource timberdale_dma_resources[] = {
{
.start = DMAOFFSET,
.end = DMAEND,
@@ -375,7 +375,7 @@
},
};
-static __devinitdata struct mfd_cell timberdale_cells_bar0_cfg0[] = {
+static struct mfd_cell timberdale_cells_bar0_cfg0[] = {
{
.name = "timb-dma",
.num_resources = ARRAY_SIZE(timberdale_dma_resources),
@@ -432,7 +432,7 @@
},
};
-static __devinitdata struct mfd_cell timberdale_cells_bar0_cfg1[] = {
+static struct mfd_cell timberdale_cells_bar0_cfg1[] = {
{
.name = "timb-dma",
.num_resources = ARRAY_SIZE(timberdale_dma_resources),
@@ -499,7 +499,7 @@
},
};
-static __devinitdata struct mfd_cell timberdale_cells_bar0_cfg2[] = {
+static struct mfd_cell timberdale_cells_bar0_cfg2[] = {
{
.name = "timb-dma",
.num_resources = ARRAY_SIZE(timberdale_dma_resources),
@@ -549,7 +549,7 @@
},
};
-static __devinitdata struct mfd_cell timberdale_cells_bar0_cfg3[] = {
+static struct mfd_cell timberdale_cells_bar0_cfg3[] = {
{
.name = "timb-dma",
.num_resources = ARRAY_SIZE(timberdale_dma_resources),
@@ -606,7 +606,7 @@
},
};
-static const __devinitconst struct resource timberdale_sdhc_resources[] = {
+static const struct resource timberdale_sdhc_resources[] = {
/* located in bar 1 and bar 2 */
{
.start = SDHC0OFFSET,
@@ -620,7 +620,7 @@
},
};
-static __devinitdata struct mfd_cell timberdale_cells_bar1[] = {
+static struct mfd_cell timberdale_cells_bar1[] = {
{
.name = "sdhci",
.num_resources = ARRAY_SIZE(timberdale_sdhc_resources),
@@ -628,7 +628,7 @@
},
};
-static __devinitdata struct mfd_cell timberdale_cells_bar2[] = {
+static struct mfd_cell timberdale_cells_bar2[] = {
{
.name = "sdhci",
.num_resources = ARRAY_SIZE(timberdale_sdhc_resources),
@@ -650,7 +650,7 @@
/*--------------------------------------------------------------------------*/
-static int __devinit timb_probe(struct pci_dev *dev,
+static int timb_probe(struct pci_dev *dev,
const struct pci_device_id *id)
{
struct timberdale_device *priv;
@@ -840,7 +840,7 @@
return -ENODEV;
}
-static void __devexit timb_remove(struct pci_dev *dev)
+static void timb_remove(struct pci_dev *dev)
{
struct timberdale_device *priv = pci_get_drvdata(dev);
@@ -867,7 +867,7 @@
.name = DRIVER_NAME,
.id_table = timberdale_pci_tbl,
.probe = timb_probe,
- .remove = __devexit_p(timb_remove),
+ .remove = timb_remove,
};
static int __init timberdale_init(void)
diff --git a/drivers/mfd/tps6105x.c b/drivers/mfd/tps6105x.c
index 14051bd..1d302f5 100644
--- a/drivers/mfd/tps6105x.c
+++ b/drivers/mfd/tps6105x.c
@@ -86,7 +86,7 @@
}
EXPORT_SYMBOL(tps6105x_mask_and_set);
-static int __devinit tps6105x_startup(struct tps6105x *tps6105x)
+static int tps6105x_startup(struct tps6105x *tps6105x)
{
int ret;
u8 regval;
@@ -133,7 +133,7 @@
},
};
-static int __devinit tps6105x_probe(struct i2c_client *client,
+static int tps6105x_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct tps6105x *tps6105x;
@@ -199,7 +199,7 @@
return ret;
}
-static int __devexit tps6105x_remove(struct i2c_client *client)
+static int tps6105x_remove(struct i2c_client *client)
{
struct tps6105x *tps6105x = i2c_get_clientdata(client);
@@ -226,7 +226,7 @@
.name = "tps6105x",
},
.probe = tps6105x_probe,
- .remove = __devexit_p(tps6105x_remove),
+ .remove = tps6105x_remove,
.id_table = tps6105x_id,
};
diff --git a/drivers/mfd/tps65090.c b/drivers/mfd/tps65090.c
index 074ae32..382a857 100644
--- a/drivers/mfd/tps65090.c
+++ b/drivers/mfd/tps65090.c
@@ -188,7 +188,7 @@
return acks ? IRQ_HANDLED : IRQ_NONE;
}
-static int __devinit tps65090_irq_init(struct tps65090 *tps65090, int irq,
+static int tps65090_irq_init(struct tps65090 *tps65090, int irq,
int irq_base)
{
int i, ret;
@@ -251,7 +251,7 @@
.volatile_reg = is_volatile_reg,
};
-static int __devinit tps65090_i2c_probe(struct i2c_client *client,
+static int tps65090_i2c_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct tps65090_platform_data *pdata = client->dev.platform_data;
@@ -308,7 +308,7 @@
return ret;
}
-static int __devexit tps65090_i2c_remove(struct i2c_client *client)
+static int tps65090_i2c_remove(struct i2c_client *client)
{
struct tps65090 *tps65090 = i2c_get_clientdata(client);
@@ -354,7 +354,7 @@
.pm = &tps65090_pm_ops,
},
.probe = tps65090_i2c_probe,
- .remove = __devexit_p(tps65090_i2c_remove),
+ .remove = tps65090_i2c_remove,
.id_table = tps65090_id_table,
};
diff --git a/drivers/mfd/tps65217.c b/drivers/mfd/tps65217.c
index 3fb32e6..e14e252 100644
--- a/drivers/mfd/tps65217.c
+++ b/drivers/mfd/tps65217.c
@@ -153,7 +153,7 @@
{ /* sentinel */ },
};
-static int __devinit tps65217_probe(struct i2c_client *client,
+static int tps65217_probe(struct i2c_client *client,
const struct i2c_device_id *ids)
{
struct tps65217 *tps;
@@ -214,7 +214,7 @@
return 0;
}
-static int __devexit tps65217_remove(struct i2c_client *client)
+static int tps65217_remove(struct i2c_client *client)
{
struct tps65217 *tps = i2c_get_clientdata(client);
@@ -237,7 +237,7 @@
},
.id_table = tps65217_id_table,
.probe = tps65217_probe,
- .remove = __devexit_p(tps65217_remove),
+ .remove = tps65217_remove,
};
static int __init tps65217_init(void)
diff --git a/drivers/mfd/tps6586x.c b/drivers/mfd/tps6586x.c
index 4674643..9f92c3b 100644
--- a/drivers/mfd/tps6586x.c
+++ b/drivers/mfd/tps6586x.c
@@ -267,7 +267,7 @@
return IRQ_HANDLED;
}
-static int __devinit tps6586x_irq_init(struct tps6586x *tps6586x, int irq,
+static int tps6586x_irq_init(struct tps6586x *tps6586x, int irq,
int irq_base)
{
int i, ret;
@@ -316,7 +316,7 @@
return ret;
}
-static int __devinit tps6586x_add_subdevs(struct tps6586x *tps6586x,
+static int tps6586x_add_subdevs(struct tps6586x *tps6586x,
struct tps6586x_platform_data *pdata)
{
struct tps6586x_subdev_info *subdev;
@@ -468,7 +468,7 @@
tps6586x_set_bits(tps6586x_dev, TPS6586X_SUPPLYENE, SLEEP_MODE_BIT);
}
-static int __devinit tps6586x_i2c_probe(struct i2c_client *client,
+static int tps6586x_i2c_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct tps6586x_platform_data *pdata = client->dev.platform_data;
@@ -548,7 +548,7 @@
return ret;
}
-static int __devexit tps6586x_i2c_remove(struct i2c_client *client)
+static int tps6586x_i2c_remove(struct i2c_client *client)
{
struct tps6586x *tps6586x = i2c_get_clientdata(client);
@@ -572,7 +572,7 @@
.of_match_table = of_match_ptr(tps6586x_of_match),
},
.probe = tps6586x_i2c_probe,
- .remove = __devexit_p(tps6586x_i2c_remove),
+ .remove = tps6586x_i2c_remove,
.id_table = tps6586x_id_table,
};
diff --git a/drivers/mfd/tps65910.c b/drivers/mfd/tps65910.c
index 0d79ce2..ce05465 100644
--- a/drivers/mfd/tps65910.c
+++ b/drivers/mfd/tps65910.c
@@ -78,7 +78,7 @@
.cache_type = REGCACHE_RBTREE,
};
-static int __devinit tps65910_ck32k_init(struct tps65910 *tps65910,
+static int tps65910_ck32k_init(struct tps65910 *tps65910,
struct tps65910_board *pmic_pdata)
{
int ret;
@@ -96,7 +96,7 @@
return 0;
}
-static int __devinit tps65910_sleepinit(struct tps65910 *tps65910,
+static int tps65910_sleepinit(struct tps65910 *tps65910,
struct tps65910_board *pmic_pdata)
{
struct device *dev = NULL;
@@ -237,7 +237,7 @@
DEVCTRL_DEV_ON_MASK);
}
-static __devinit int tps65910_i2c_probe(struct i2c_client *i2c,
+static int tps65910_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
struct tps65910 *tps65910;
@@ -302,7 +302,7 @@
return ret;
}
-static __devexit int tps65910_i2c_remove(struct i2c_client *i2c)
+static int tps65910_i2c_remove(struct i2c_client *i2c)
{
struct tps65910 *tps65910 = i2c_get_clientdata(i2c);
@@ -327,7 +327,7 @@
.of_match_table = of_match_ptr(tps65910_of_match),
},
.probe = tps65910_i2c_probe,
- .remove = __devexit_p(tps65910_i2c_remove),
+ .remove = tps65910_i2c_remove,
.id_table = tps65910_i2c_id,
};
diff --git a/drivers/mfd/tps65911-comparator.c b/drivers/mfd/tps65911-comparator.c
index 0b6e361..c0816eb 100644
--- a/drivers/mfd/tps65911-comparator.c
+++ b/drivers/mfd/tps65911-comparator.c
@@ -122,7 +122,7 @@
static DEVICE_ATTR(comp1_threshold, S_IRUGO, comp_threshold_show, NULL);
static DEVICE_ATTR(comp2_threshold, S_IRUGO, comp_threshold_show, NULL);
-static __devinit int tps65911_comparator_probe(struct platform_device *pdev)
+static int tps65911_comparator_probe(struct platform_device *pdev)
{
struct tps65910 *tps65910 = dev_get_drvdata(pdev->dev.parent);
struct tps65910_board *pdata = dev_get_platdata(tps65910->dev);
@@ -152,7 +152,7 @@
return ret;
}
-static __devexit int tps65911_comparator_remove(struct platform_device *pdev)
+static int tps65911_comparator_remove(struct platform_device *pdev)
{
struct tps65910 *tps65910;
@@ -169,7 +169,7 @@
.owner = THIS_MODULE,
},
.probe = tps65911_comparator_probe,
- .remove = __devexit_p(tps65911_comparator_remove),
+ .remove = tps65911_comparator_remove,
};
static int __init tps65911_comparator_init(void)
diff --git a/drivers/mfd/tps65912-spi.c b/drivers/mfd/tps65912-spi.c
index 27d3302..b45f460 100644
--- a/drivers/mfd/tps65912-spi.c
+++ b/drivers/mfd/tps65912-spi.c
@@ -81,7 +81,7 @@
return ret;
}
-static int __devinit tps65912_spi_probe(struct spi_device *spi)
+static int tps65912_spi_probe(struct spi_device *spi)
{
struct tps65912 *tps65912;
@@ -99,7 +99,7 @@
return tps65912_device_init(tps65912);
}
-static int __devexit tps65912_spi_remove(struct spi_device *spi)
+static int tps65912_spi_remove(struct spi_device *spi)
{
struct tps65912 *tps65912 = spi_get_drvdata(spi);
@@ -114,7 +114,7 @@
.owner = THIS_MODULE,
},
.probe = tps65912_spi_probe,
- .remove = __devexit_p(tps65912_spi_remove),
+ .remove = tps65912_spi_remove,
};
static int __init tps65912_spi_init(void)
diff --git a/drivers/mfd/twl-core.c b/drivers/mfd/twl-core.c
index a071a86..11b76c0 100644
--- a/drivers/mfd/twl-core.c
+++ b/drivers/mfd/twl-core.c
@@ -1170,7 +1170,7 @@
}
/* NOTE: This driver only handles a single twl4030/tps659x0 chip */
-static int __devinit
+static int
twl_probe(struct i2c_client *client, const struct i2c_device_id *id)
{
struct twl4030_platform_data *pdata = client->dev.platform_data;
diff --git a/drivers/mfd/twl4030-audio.c b/drivers/mfd/twl4030-audio.c
index 5c11acf..e16edca 100644
--- a/drivers/mfd/twl4030-audio.c
+++ b/drivers/mfd/twl4030-audio.c
@@ -184,7 +184,7 @@
return false;
}
-static int __devinit twl4030_audio_probe(struct platform_device *pdev)
+static int twl4030_audio_probe(struct platform_device *pdev)
{
struct twl4030_audio *audio;
struct twl4030_audio_data *pdata = pdev->dev.platform_data;
@@ -269,7 +269,7 @@
return ret;
}
-static int __devexit twl4030_audio_remove(struct platform_device *pdev)
+static int twl4030_audio_remove(struct platform_device *pdev)
{
mfd_remove_devices(&pdev->dev);
platform_set_drvdata(pdev, NULL);
@@ -291,7 +291,7 @@
.of_match_table = twl4030_audio_of_match,
},
.probe = twl4030_audio_probe,
- .remove = __devexit_p(twl4030_audio_remove),
+ .remove = twl4030_audio_remove,
};
module_platform_driver(twl4030_audio_driver);
diff --git a/drivers/mfd/twl4030-madc.c b/drivers/mfd/twl4030-madc.c
index 456ecb5..a39dcf3 100644
--- a/drivers/mfd/twl4030-madc.c
+++ b/drivers/mfd/twl4030-madc.c
@@ -692,7 +692,7 @@
/*
* Initialize MADC and request for threaded irq
*/
-static int __devinit twl4030_madc_probe(struct platform_device *pdev)
+static int twl4030_madc_probe(struct platform_device *pdev)
{
struct twl4030_madc_data *madc;
struct twl4030_madc_platform_data *pdata = pdev->dev.platform_data;
@@ -785,7 +785,7 @@
return ret;
}
-static int __devexit twl4030_madc_remove(struct platform_device *pdev)
+static int twl4030_madc_remove(struct platform_device *pdev)
{
struct twl4030_madc_data *madc = platform_get_drvdata(pdev);
diff --git a/drivers/mfd/twl4030-power.c b/drivers/mfd/twl4030-power.c
index 79ca33d..a533206 100644
--- a/drivers/mfd/twl4030-power.c
+++ b/drivers/mfd/twl4030-power.c
@@ -124,7 +124,7 @@
[RES_MAIN_REF] = 0x94,
};
-static int __devinit twl4030_write_script_byte(u8 address, u8 byte)
+static int twl4030_write_script_byte(u8 address, u8 byte)
{
int err;
@@ -138,7 +138,7 @@
return err;
}
-static int __devinit twl4030_write_script_ins(u8 address, u16 pmb_message,
+static int twl4030_write_script_ins(u8 address, u16 pmb_message,
u8 delay, u8 next)
{
int err;
@@ -158,7 +158,7 @@
return err;
}
-static int __devinit twl4030_write_script(u8 address, struct twl4030_ins *script,
+static int twl4030_write_script(u8 address, struct twl4030_ins *script,
int len)
{
int err;
@@ -183,7 +183,7 @@
return err;
}
-static int __devinit twl4030_config_wakeup3_sequence(u8 address)
+static int twl4030_config_wakeup3_sequence(u8 address)
{
int err;
u8 data;
@@ -208,7 +208,7 @@
return err;
}
-static int __devinit twl4030_config_wakeup12_sequence(u8 address)
+static int twl4030_config_wakeup12_sequence(u8 address)
{
int err = 0;
u8 data;
@@ -262,7 +262,7 @@
return err;
}
-static int __devinit twl4030_config_sleep_sequence(u8 address)
+static int twl4030_config_sleep_sequence(u8 address)
{
int err;
@@ -276,7 +276,7 @@
return err;
}
-static int __devinit twl4030_config_warmreset_sequence(u8 address)
+static int twl4030_config_warmreset_sequence(u8 address)
{
int err;
u8 rd_data;
@@ -324,7 +324,7 @@
return err;
}
-static int __devinit twl4030_configure_resource(struct twl4030_resconfig *rconfig)
+static int twl4030_configure_resource(struct twl4030_resconfig *rconfig)
{
int rconfig_addr;
int err;
@@ -416,7 +416,7 @@
return 0;
}
-static int __devinit load_twl4030_script(struct twl4030_script *tscript,
+static int load_twl4030_script(struct twl4030_script *tscript,
u8 address)
{
int err;
@@ -527,7 +527,7 @@
pr_err("TWL4030 Unable to power off\n");
}
-void __devinit twl4030_power_init(struct twl4030_power_data *twl4030_scripts)
+void twl4030_power_init(struct twl4030_power_data *twl4030_scripts)
{
int err = 0;
int i;
diff --git a/drivers/mfd/vx855.c b/drivers/mfd/vx855.c
index b9a636d..757ecc63 100644
--- a/drivers/mfd/vx855.c
+++ b/drivers/mfd/vx855.c
@@ -72,7 +72,7 @@
},
};
-static __devinit int vx855_probe(struct pci_dev *pdev,
+static int vx855_probe(struct pci_dev *pdev,
const struct pci_device_id *id)
{
int ret;
@@ -112,7 +112,7 @@
return ret;
}
-static void __devexit vx855_remove(struct pci_dev *pdev)
+static void vx855_remove(struct pci_dev *pdev)
{
mfd_remove_devices(&pdev->dev);
pci_disable_device(pdev);
@@ -128,7 +128,7 @@
.name = "vx855",
.id_table = vx855_pci_tbl,
.probe = vx855_probe,
- .remove = __devexit_p(vx855_remove),
+ .remove = vx855_remove,
};
module_pci_driver(vx855_pci_driver);
diff --git a/drivers/mfd/wl1273-core.c b/drivers/mfd/wl1273-core.c
index 86e0e43..edbe6c1 100644
--- a/drivers/mfd/wl1273-core.c
+++ b/drivers/mfd/wl1273-core.c
@@ -182,7 +182,7 @@
return 0;
}
-static int __devinit wl1273_core_probe(struct i2c_client *client,
+static int wl1273_core_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct wl1273_fm_platform_data *pdata = client->dev.platform_data;
@@ -262,7 +262,7 @@
},
.probe = wl1273_core_probe,
.id_table = wl1273_driver_id_table,
- .remove = __devexit_p(wl1273_core_remove),
+ .remove = wl1273_core_remove,
};
static int __init wl1273_core_init(void)
diff --git a/drivers/mfd/wm831x-spi.c b/drivers/mfd/wm831x-spi.c
index 4bceee9..4e70e15 100644
--- a/drivers/mfd/wm831x-spi.c
+++ b/drivers/mfd/wm831x-spi.c
@@ -21,7 +21,7 @@
#include <linux/mfd/wm831x/core.h>
-static int __devinit wm831x_spi_probe(struct spi_device *spi)
+static int wm831x_spi_probe(struct spi_device *spi)
{
const struct spi_device_id *id = spi_get_device_id(spi);
struct wm831x *wm831x;
@@ -51,7 +51,7 @@
return wm831x_device_init(wm831x, type, spi->irq);
}
-static int __devexit wm831x_spi_remove(struct spi_device *spi)
+static int wm831x_spi_remove(struct spi_device *spi)
{
struct wm831x *wm831x = dev_get_drvdata(&spi->dev);
@@ -99,7 +99,7 @@
},
.id_table = wm831x_spi_ids,
.probe = wm831x_spi_probe,
- .remove = __devexit_p(wm831x_spi_remove),
+ .remove = wm831x_spi_remove,
.shutdown = wm831x_spi_shutdown,
};
diff --git a/drivers/mfd/wm8994-core.c b/drivers/mfd/wm8994-core.c
index 8fefc96..c7f62ac 100644
--- a/drivers/mfd/wm8994-core.c
+++ b/drivers/mfd/wm8994-core.c
@@ -374,21 +374,21 @@
}
#endif
-static const __devinitconst struct reg_default wm8994_revc_patch[] = {
+static const struct reg_default wm8994_revc_patch[] = {
{ 0x102, 0x3 },
{ 0x56, 0x3 },
{ 0x817, 0x0 },
{ 0x102, 0x0 },
};
-static const __devinitconst struct reg_default wm8958_reva_patch[] = {
+static const struct reg_default wm8958_reva_patch[] = {
{ 0x102, 0x3 },
{ 0xcb, 0x81 },
{ 0x817, 0x0 },
{ 0x102, 0x0 },
};
-static const __devinitconst struct reg_default wm1811_reva_patch[] = {
+static const struct reg_default wm1811_reva_patch[] = {
{ 0x102, 0x3 },
{ 0x56, 0xc07 },
{ 0x5d, 0x7e },
@@ -399,7 +399,7 @@
/*
* Instantiate the generic non-control parts of the device.
*/
-static __devinit int wm8994_device_init(struct wm8994 *wm8994, int irq)
+static int wm8994_device_init(struct wm8994 *wm8994, int irq)
{
struct wm8994_pdata *pdata = wm8994->dev->platform_data;
struct regmap_config *regmap_config;
@@ -671,7 +671,7 @@
return ret;
}
-static __devexit void wm8994_device_exit(struct wm8994 *wm8994)
+static void wm8994_device_exit(struct wm8994 *wm8994)
{
pm_runtime_disable(wm8994->dev);
mfd_remove_devices(wm8994->dev);
@@ -689,7 +689,7 @@
};
MODULE_DEVICE_TABLE(of, wm8994_of_match);
-static __devinit int wm8994_i2c_probe(struct i2c_client *i2c,
+static int wm8994_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
struct wm8994 *wm8994;
@@ -715,7 +715,7 @@
return wm8994_device_init(wm8994, i2c->irq);
}
-static __devexit int wm8994_i2c_remove(struct i2c_client *i2c)
+static int wm8994_i2c_remove(struct i2c_client *i2c)
{
struct wm8994 *wm8994 = i2c_get_clientdata(i2c);
@@ -744,7 +744,7 @@
.of_match_table = wm8994_of_match,
},
.probe = wm8994_i2c_probe,
- .remove = __devexit_p(wm8994_i2c_remove),
+ .remove = wm8994_i2c_remove,
.id_table = wm8994_i2c_id,
};
diff --git a/drivers/misc/ad525x_dpot-i2c.c b/drivers/misc/ad525x_dpot-i2c.c
index 8208262..705b881 100644
--- a/drivers/misc/ad525x_dpot-i2c.c
+++ b/drivers/misc/ad525x_dpot-i2c.c
@@ -51,7 +51,7 @@
.write_r8d16 = write_r8d16,
};
-static int __devinit ad_dpot_i2c_probe(struct i2c_client *client,
+static int ad_dpot_i2c_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct ad_dpot_bus_data bdata = {
@@ -68,7 +68,7 @@
return ad_dpot_probe(&client->dev, &bdata, id->driver_data, id->name);
}
-static int __devexit ad_dpot_i2c_remove(struct i2c_client *client)
+static int ad_dpot_i2c_remove(struct i2c_client *client)
{
return ad_dpot_remove(&client->dev);
}
@@ -109,7 +109,7 @@
.owner = THIS_MODULE,
},
.probe = ad_dpot_i2c_probe,
- .remove = __devexit_p(ad_dpot_i2c_remove),
+ .remove = ad_dpot_i2c_remove,
.id_table = ad_dpot_id,
};
diff --git a/drivers/misc/ad525x_dpot-spi.c b/drivers/misc/ad525x_dpot-spi.c
index f623175..9da04ed 100644
--- a/drivers/misc/ad525x_dpot-spi.c
+++ b/drivers/misc/ad525x_dpot-spi.c
@@ -75,7 +75,7 @@
.write_r8d8 = write16,
.write_r8d16 = write24,
};
-static int __devinit ad_dpot_spi_probe(struct spi_device *spi)
+static int ad_dpot_spi_probe(struct spi_device *spi)
{
struct ad_dpot_bus_data bdata = {
.client = spi,
@@ -87,7 +87,7 @@
spi_get_device_id(spi)->name);
}
-static int __devexit ad_dpot_spi_remove(struct spi_device *spi)
+static int ad_dpot_spi_remove(struct spi_device *spi)
{
return ad_dpot_remove(&spi->dev);
}
@@ -131,7 +131,7 @@
.owner = THIS_MODULE,
},
.probe = ad_dpot_spi_probe,
- .remove = __devexit_p(ad_dpot_spi_remove),
+ .remove = ad_dpot_spi_remove,
.id_table = ad_dpot_spi_id,
};
diff --git a/drivers/misc/ad525x_dpot.c b/drivers/misc/ad525x_dpot.c
index 6938f1b..8f99e8e 100644
--- a/drivers/misc/ad525x_dpot.c
+++ b/drivers/misc/ad525x_dpot.c
@@ -641,7 +641,7 @@
.attrs = ad525x_attributes_commands,
};
-__devinit int ad_dpot_add_files(struct device *dev,
+int ad_dpot_add_files(struct device *dev,
unsigned features, unsigned rdac)
{
int err = sysfs_create_file(&dev->kobj,
@@ -685,7 +685,7 @@
}
}
-int __devinit ad_dpot_probe(struct device *dev,
+int ad_dpot_probe(struct device *dev,
struct ad_dpot_bus_data *bdata, unsigned long devid,
const char *name)
{
diff --git a/drivers/misc/apds9802als.c b/drivers/misc/apds9802als.c
index 0314773..d648b08 100644
--- a/drivers/misc/apds9802als.c
+++ b/drivers/misc/apds9802als.c
@@ -68,7 +68,7 @@
ret = i2c_smbus_read_byte_data(client, 0x86);
} while (!(ret & 0x80) && retry--);
- if (!retry) {
+ if (retry < 0) {
dev_warn(dev, "timeout waiting for data ready\n");
return -ETIMEDOUT;
}
@@ -254,7 +254,7 @@
return res;
}
-static int __devexit apds9802als_remove(struct i2c_client *client)
+static int apds9802als_remove(struct i2c_client *client)
{
struct als_data *data = i2c_get_clientdata(client);
@@ -326,7 +326,7 @@
.pm = APDS9802ALS_PM_OPS,
},
.probe = apds9802als_probe,
- .remove = __devexit_p(apds9802als_remove),
+ .remove = apds9802als_remove,
.suspend = apds9802als_suspend,
.resume = apds9802als_resume,
.id_table = apds9802als_id,
diff --git a/drivers/misc/apds990x.c b/drivers/misc/apds990x.c
index ee74244..0e67f82 100644
--- a/drivers/misc/apds990x.c
+++ b/drivers/misc/apds990x.c
@@ -1047,7 +1047,7 @@
{.attrs = sysfs_attrs_ctrl },
};
-static int __devinit apds990x_probe(struct i2c_client *client,
+static int apds990x_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct apds990x_chip *chip;
@@ -1181,7 +1181,7 @@
return err;
}
-static int __devexit apds990x_remove(struct i2c_client *client)
+static int apds990x_remove(struct i2c_client *client)
{
struct apds990x_chip *chip = i2c_get_clientdata(client);
@@ -1275,7 +1275,7 @@
.pm = &apds990x_pm_ops,
},
.probe = apds990x_probe,
- .remove = __devexit_p(apds990x_remove),
+ .remove = apds990x_remove,
.id_table = apds990x_id,
};
diff --git a/drivers/misc/atmel-ssc.c b/drivers/misc/atmel-ssc.c
index 5bb1877..c58f9ab 100644
--- a/drivers/misc/atmel-ssc.c
+++ b/drivers/misc/atmel-ssc.c
@@ -137,7 +137,7 @@
return retval;
}
-static int __devexit ssc_remove(struct platform_device *pdev)
+static int ssc_remove(struct platform_device *pdev)
{
struct ssc_device *ssc = platform_get_drvdata(pdev);
@@ -152,7 +152,7 @@
}
static struct platform_driver ssc_driver = {
- .remove = __devexit_p(ssc_remove),
+ .remove = ssc_remove,
.driver = {
.name = "ssc",
.owner = THIS_MODULE,
diff --git a/drivers/misc/bh1770glc.c b/drivers/misc/bh1770glc.c
index 3d56ae7..2ed8fc3 100644
--- a/drivers/misc/bh1770glc.c
+++ b/drivers/misc/bh1770glc.c
@@ -1162,7 +1162,7 @@
.attrs = sysfs_attrs
};
-static int __devinit bh1770_probe(struct i2c_client *client,
+static int bh1770_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct bh1770_chip *chip;
@@ -1285,7 +1285,7 @@
return err;
}
-static int __devexit bh1770_remove(struct i2c_client *client)
+static int bh1770_remove(struct i2c_client *client)
{
struct bh1770_chip *chip = i2c_get_clientdata(client);
@@ -1395,7 +1395,7 @@
.pm = &bh1770_pm_ops,
},
.probe = bh1770_probe,
- .remove = __devexit_p(bh1770_remove),
+ .remove = bh1770_remove,
.id_table = bh1770_id,
};
diff --git a/drivers/misc/bh1780gli.c b/drivers/misc/bh1780gli.c
index f1f9877..cf03d0a 100644
--- a/drivers/misc/bh1780gli.c
+++ b/drivers/misc/bh1780gli.c
@@ -144,7 +144,7 @@
.attrs = bh1780_attributes,
};
-static int __devinit bh1780_probe(struct i2c_client *client,
+static int bh1780_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
int ret;
@@ -185,7 +185,7 @@
return ret;
}
-static int __devexit bh1780_remove(struct i2c_client *client)
+static int bh1780_remove(struct i2c_client *client)
{
struct bh1780_data *ddata;
@@ -248,7 +248,7 @@
static struct i2c_driver bh1780_driver = {
.probe = bh1780_probe,
- .remove = __devexit_p(bh1780_remove),
+ .remove = bh1780_remove,
.id_table = bh1780_id,
.driver = {
.name = "bh1780",
diff --git a/drivers/misc/bmp085-i2c.c b/drivers/misc/bmp085-i2c.c
index a4f33c9..3abfcec 100644
--- a/drivers/misc/bmp085-i2c.c
+++ b/drivers/misc/bmp085-i2c.c
@@ -36,7 +36,7 @@
return bmp085_detect(&client->dev);
}
-static int __devinit bmp085_i2c_probe(struct i2c_client *client,
+static int bmp085_i2c_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
int err;
@@ -71,7 +71,7 @@
},
.id_table = bmp085_id,
.probe = bmp085_i2c_probe,
- .remove = __devexit_p(bmp085_i2c_remove),
+ .remove = bmp085_i2c_remove,
.detect = bmp085_i2c_detect,
.address_list = normal_i2c
diff --git a/drivers/misc/bmp085-spi.c b/drivers/misc/bmp085-spi.c
index 5e982af..d6a5265 100644
--- a/drivers/misc/bmp085-spi.c
+++ b/drivers/misc/bmp085-spi.c
@@ -22,7 +22,7 @@
#include <linux/err.h>
#include "bmp085.h"
-static int __devinit bmp085_spi_probe(struct spi_device *client)
+static int bmp085_spi_probe(struct spi_device *client)
{
int err;
struct regmap *regmap;
@@ -70,7 +70,7 @@
},
.id_table = bmp085_id,
.probe = bmp085_spi_probe,
- .remove = __devexit_p(bmp085_spi_remove)
+ .remove = bmp085_spi_remove
};
module_spi_driver(bmp085_spi_driver);
diff --git a/drivers/misc/bmp085.c b/drivers/misc/bmp085.c
index 62e4182..849e2fe 100644
--- a/drivers/misc/bmp085.c
+++ b/drivers/misc/bmp085.c
@@ -420,7 +420,7 @@
};
EXPORT_SYMBOL_GPL(bmp085_regmap_config);
-__devinit int bmp085_probe(struct device *dev, struct regmap *regmap)
+int bmp085_probe(struct device *dev, struct regmap *regmap)
{
struct bmp085_data *data;
int err = 0;
diff --git a/drivers/misc/cb710/core.c b/drivers/misc/cb710/core.c
index 9d5eed7..2e50f81 100644
--- a/drivers/misc/cb710/core.c
+++ b/drivers/misc/cb710/core.c
@@ -30,7 +30,7 @@
EXPORT_SYMBOL_GPL(cb710_pci_update_config_reg);
/* Some magic writes based on Windows driver init code */
-static int __devinit cb710_pci_configure(struct pci_dev *pdev)
+static int cb710_pci_configure(struct pci_dev *pdev)
{
unsigned int devfn = PCI_DEVFN(PCI_SLOT(pdev->devfn), 0);
struct pci_dev *pdev0;
@@ -96,7 +96,7 @@
#endif
}
-static int __devinit cb710_register_slot(struct cb710_chip *chip,
+static int cb710_register_slot(struct cb710_chip *chip,
unsigned slot_mask, unsigned io_offset, const char *name)
{
int nr = chip->slots;
@@ -201,7 +201,7 @@
#endif /* CONFIG_PM */
-static int __devinit cb710_probe(struct pci_dev *pdev,
+static int cb710_probe(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
struct cb710_chip *chip;
@@ -305,7 +305,7 @@
return err;
}
-static void __devexit cb710_remove_one(struct pci_dev *pdev)
+static void cb710_remove_one(struct pci_dev *pdev)
{
struct cb710_chip *chip = pci_get_drvdata(pdev);
unsigned long flags;
@@ -332,7 +332,7 @@
.name = KBUILD_MODNAME,
.id_table = cb710_pci_tbl,
.probe = cb710_probe,
- .remove = __devexit_p(cb710_remove_one),
+ .remove = cb710_remove_one,
#ifdef CONFIG_PM
.suspend = cb710_suspend,
.resume = cb710_resume,
diff --git a/drivers/misc/cs5535-mfgpt.c b/drivers/misc/cs5535-mfgpt.c
index f505a40..9858f36 100644
--- a/drivers/misc/cs5535-mfgpt.c
+++ b/drivers/misc/cs5535-mfgpt.c
@@ -246,7 +246,7 @@
* Jordan tells me that he and Mitch once played w/ it, but it's unclear
* what the results of that were (and they experienced some instability).
*/
-static void __devinit reset_all_timers(void)
+static void reset_all_timers(void)
{
uint32_t val, dummy;
@@ -262,7 +262,7 @@
* In other cases (such as with VSAless OpenFirmware), the system firmware
* leaves timers available for us to use.
*/
-static int __devinit scan_timers(struct cs5535_mfgpt_chip *mfgpt)
+static int scan_timers(struct cs5535_mfgpt_chip *mfgpt)
{
struct cs5535_mfgpt_timer timer = { .chip = mfgpt };
unsigned long flags;
@@ -289,7 +289,7 @@
return timers;
}
-static int __devinit cs5535_mfgpt_probe(struct platform_device *pdev)
+static int cs5535_mfgpt_probe(struct platform_device *pdev)
{
struct resource *res;
int err = -EIO, t;
diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c
index ab1ad41..2baeec5 100644
--- a/drivers/misc/eeprom/at24.c
+++ b/drivers/misc/eeprom/at24.c
@@ -656,7 +656,7 @@
return err;
}
-static int __devexit at24_remove(struct i2c_client *client)
+static int at24_remove(struct i2c_client *client)
{
struct at24_data *at24;
int i;
@@ -680,7 +680,7 @@
.owner = THIS_MODULE,
},
.probe = at24_probe,
- .remove = __devexit_p(at24_remove),
+ .remove = at24_remove,
.id_table = at24_ids,
};
diff --git a/drivers/misc/eeprom/at25.c b/drivers/misc/eeprom/at25.c
index 4ed93dd..b08cf8a 100644
--- a/drivers/misc/eeprom/at25.c
+++ b/drivers/misc/eeprom/at25.c
@@ -459,7 +459,7 @@
return err;
}
-static int __devexit at25_remove(struct spi_device *spi)
+static int at25_remove(struct spi_device *spi)
{
struct at25_data *at25;
@@ -477,7 +477,7 @@
.owner = THIS_MODULE,
},
.probe = at25_probe,
- .remove = __devexit_p(at25_remove),
+ .remove = at25_remove,
};
module_spi_driver(at25_driver);
diff --git a/drivers/misc/eeprom/eeprom_93xx46.c b/drivers/misc/eeprom/eeprom_93xx46.c
index ce3fe36..a6b5d5e 100644
--- a/drivers/misc/eeprom/eeprom_93xx46.c
+++ b/drivers/misc/eeprom/eeprom_93xx46.c
@@ -309,7 +309,7 @@
}
static DEVICE_ATTR(erase, S_IWUSR, NULL, eeprom_93xx46_store_erase);
-static int __devinit eeprom_93xx46_probe(struct spi_device *spi)
+static int eeprom_93xx46_probe(struct spi_device *spi)
{
struct eeprom_93xx46_platform_data *pd;
struct eeprom_93xx46_dev *edev;
@@ -370,7 +370,7 @@
return err;
}
-static int __devexit eeprom_93xx46_remove(struct spi_device *spi)
+static int eeprom_93xx46_remove(struct spi_device *spi)
{
struct eeprom_93xx46_dev *edev = dev_get_drvdata(&spi->dev);
@@ -389,7 +389,7 @@
.owner = THIS_MODULE,
},
.probe = eeprom_93xx46_probe,
- .remove = __devexit_p(eeprom_93xx46_remove),
+ .remove = eeprom_93xx46_remove,
};
module_spi_driver(eeprom_93xx46_driver);
diff --git a/drivers/misc/fsa9480.c b/drivers/misc/fsa9480.c
index ac96c3a..e8cbb1c 100644
--- a/drivers/misc/fsa9480.c
+++ b/drivers/misc/fsa9480.c
@@ -407,7 +407,7 @@
return 0;
}
-static int __devinit fsa9480_probe(struct i2c_client *client,
+static int fsa9480_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
@@ -462,7 +462,7 @@
return ret;
}
-static int __devexit fsa9480_remove(struct i2c_client *client)
+static int fsa9480_remove(struct i2c_client *client)
{
struct fsa9480_usbsw *usbsw = i2c_get_clientdata(client);
if (client->irq)
@@ -533,7 +533,7 @@
.name = "fsa9480",
},
.probe = fsa9480_probe,
- .remove = __devexit_p(fsa9480_remove),
+ .remove = fsa9480_remove,
.resume = fsa9480_resume,
.suspend = fsa9480_suspend,
.id_table = fsa9480_id,
diff --git a/drivers/misc/hpilo.c b/drivers/misc/hpilo.c
index 12ccdf9..621c7a3 100644
--- a/drivers/misc/hpilo.c
+++ b/drivers/misc/hpilo.c
@@ -30,7 +30,7 @@
static struct class *ilo_class;
static unsigned int ilo_major;
-static unsigned int max_ccb = MIN_CCB;
+static unsigned int max_ccb = 16;
static char ilo_hwdev[MAX_ILO_DEV];
static inline int get_entry_id(int entry)
@@ -686,7 +686,7 @@
pci_iounmap(pdev, hw->mmio_vaddr);
}
-static int __devinit ilo_map_device(struct pci_dev *pdev, struct ilo_hwinfo *hw)
+static int ilo_map_device(struct pci_dev *pdev, struct ilo_hwinfo *hw)
{
int error = -ENOMEM;
@@ -725,6 +725,9 @@
int i, minor;
struct ilo_hwinfo *ilo_hw = pci_get_drvdata(pdev);
+ if (!ilo_hw)
+ return;
+
clear_device(ilo_hw);
minor = MINOR(ilo_hw->cdev.dev);
@@ -748,12 +751,16 @@
ilo_hwdev[(minor / max_ccb)] = 0;
}
-static int __devinit ilo_probe(struct pci_dev *pdev,
+static int ilo_probe(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
- int devnum, minor, start, error;
+ int devnum, minor, start, error = 0;
struct ilo_hwinfo *ilo_hw;
+ /* Ignore subsystem_device = 0x1979 (set by BIOS) */
+ if (pdev->subsystem_device == 0x1979)
+ goto out;
+
if (max_ccb > MAX_CCB)
max_ccb = MAX_CCB;
else if (max_ccb < MIN_CCB)
@@ -852,7 +859,7 @@
.name = ILO_NAME,
.id_table = ilo_devices,
.probe = ilo_probe,
- .remove = __devexit_p(ilo_remove),
+ .remove = ilo_remove,
};
static int __init ilo_init(void)
@@ -892,14 +899,14 @@
class_destroy(ilo_class);
}
-MODULE_VERSION("1.3");
+MODULE_VERSION("1.4");
MODULE_ALIAS(ILO_NAME);
MODULE_DESCRIPTION(ILO_NAME);
MODULE_AUTHOR("David Altobelli <david.altobelli@hp.com>");
MODULE_LICENSE("GPL v2");
module_param(max_ccb, uint, 0444);
-MODULE_PARM_DESC(max_ccb, "Maximum number of HP iLO channels to attach (8)");
+MODULE_PARM_DESC(max_ccb, "Maximum number of HP iLO channels to attach (16)");
module_init(ilo_init);
module_exit(ilo_exit);
diff --git a/drivers/misc/ibmasm/module.c b/drivers/misc/ibmasm/module.c
index 168d800..0346d87 100644
--- a/drivers/misc/ibmasm/module.c
+++ b/drivers/misc/ibmasm/module.c
@@ -62,7 +62,7 @@
MODULE_PARM_DESC(ibmasm_debug, " Set debug mode on or off");
-static int __devinit ibmasm_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
+static int ibmasm_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
{
int result;
struct service_processor *sp;
@@ -163,7 +163,7 @@
return result;
}
-static void __devexit ibmasm_remove_one(struct pci_dev *pdev)
+static void ibmasm_remove_one(struct pci_dev *pdev)
{
struct service_processor *sp = (struct service_processor *)pci_get_drvdata(pdev);
@@ -198,7 +198,7 @@
.name = DRIVER_NAME,
.id_table = ibmasm_pci_table,
.probe = ibmasm_init_one,
- .remove = __devexit_p(ibmasm_remove_one),
+ .remove = ibmasm_remove_one,
};
static void __exit ibmasm_exit (void)
diff --git a/drivers/misc/ioc4.c b/drivers/misc/ioc4.c
index 6a77106..06f6ad2 100644
--- a/drivers/misc/ioc4.c
+++ b/drivers/misc/ioc4.c
@@ -139,7 +139,7 @@
* even though the following code utilizes external interrupt registers
* to perform the speed calculation.
*/
-static void __devinit
+static void
ioc4_clock_calibrate(struct ioc4_driver_data *idd)
{
union ioc4_int_out int_out;
@@ -231,7 +231,7 @@
* on the same PCI bus at slot number 3 to differentiate IO9 from IO10.
* If neither is present, it's a PCI-RT.
*/
-static unsigned int __devinit
+static unsigned int
ioc4_variant(struct ioc4_driver_data *idd)
{
struct pci_dev *pdev = NULL;
@@ -279,7 +279,7 @@
static DECLARE_WORK(ioc4_load_modules_work, ioc4_load_modules);
/* Adds a new instance of an IOC4 card */
-static int __devinit
+static int
ioc4_probe(struct pci_dev *pdev, const struct pci_device_id *pci_id)
{
struct ioc4_driver_data *idd;
@@ -415,7 +415,7 @@
}
/* Removes a particular instance of an IOC4 card. */
-static void __devexit
+static void
ioc4_remove(struct pci_dev *pdev)
{
struct ioc4_submodule *is;
@@ -466,7 +466,7 @@
.name = "IOC4",
.id_table = ioc4_id_table,
.probe = ioc4_probe,
- .remove = __devexit_p(ioc4_remove),
+ .remove = ioc4_remove,
};
MODULE_DEVICE_TABLE(pci, ioc4_id_table);
diff --git a/drivers/misc/isl29003.c b/drivers/misc/isl29003.c
index eb5de2e..29b306c 100644
--- a/drivers/misc/isl29003.c
+++ b/drivers/misc/isl29003.c
@@ -365,7 +365,7 @@
* I2C layer
*/
-static int __devinit isl29003_probe(struct i2c_client *client,
+static int isl29003_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
@@ -401,7 +401,7 @@
return err;
}
-static int __devexit isl29003_remove(struct i2c_client *client)
+static int isl29003_remove(struct i2c_client *client)
{
sysfs_remove_group(&client->dev.kobj, &isl29003_attr_group);
isl29003_set_power_state(client, 0);
@@ -451,7 +451,7 @@
.suspend = isl29003_suspend,
.resume = isl29003_resume,
.probe = isl29003_probe,
- .remove = __devexit_p(isl29003_remove),
+ .remove = isl29003_remove,
.id_table = isl29003_id,
};
diff --git a/drivers/misc/lis3lv02d/lis3lv02d_i2c.c b/drivers/misc/lis3lv02d/lis3lv02d_i2c.c
index 60ec868..7c97550 100644
--- a/drivers/misc/lis3lv02d/lis3lv02d_i2c.c
+++ b/drivers/misc/lis3lv02d/lis3lv02d_i2c.c
@@ -114,7 +114,7 @@
MODULE_DEVICE_TABLE(of, lis3lv02d_i2c_dt_ids);
#endif
-static int __devinit lis3lv02d_i2c_probe(struct i2c_client *client,
+static int lis3lv02d_i2c_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
int ret = 0;
@@ -191,7 +191,7 @@
return ret;
}
-static int __devexit lis3lv02d_i2c_remove(struct i2c_client *client)
+static int lis3lv02d_i2c_remove(struct i2c_client *client)
{
struct lis3lv02d *lis3 = i2c_get_clientdata(client);
struct lis3lv02d_platform_data *pdata = client->dev.platform_data;
@@ -280,7 +280,7 @@
.of_match_table = of_match_ptr(lis3lv02d_i2c_dt_ids),
},
.probe = lis3lv02d_i2c_probe,
- .remove = __devexit_p(lis3lv02d_i2c_remove),
+ .remove = lis3lv02d_i2c_remove,
.id_table = lis3lv02d_id,
};
diff --git a/drivers/misc/lis3lv02d/lis3lv02d_spi.c b/drivers/misc/lis3lv02d/lis3lv02d_spi.c
index ccb6475..9aa2bd2 100644
--- a/drivers/misc/lis3lv02d/lis3lv02d_spi.c
+++ b/drivers/misc/lis3lv02d/lis3lv02d_spi.c
@@ -69,7 +69,7 @@
MODULE_DEVICE_TABLE(of, lis302dl_spi_dt_ids);
#endif
-static int __devinit lis302dl_spi_probe(struct spi_device *spi)
+static int lis302dl_spi_probe(struct spi_device *spi)
{
int ret;
@@ -100,7 +100,7 @@
return lis3lv02d_init_device(&lis3_dev);
}
-static int __devexit lis302dl_spi_remove(struct spi_device *spi)
+static int lis302dl_spi_remove(struct spi_device *spi)
{
struct lis3lv02d *lis3 = spi_get_drvdata(spi);
lis3lv02d_joystick_disable(lis3);
@@ -144,7 +144,7 @@
.of_match_table = of_match_ptr(lis302dl_spi_dt_ids),
},
.probe = lis302dl_spi_probe,
- .remove = __devexit_p(lis302dl_spi_remove),
+ .remove = lis302dl_spi_remove,
};
module_spi_driver(lis302dl_spi_driver);
diff --git a/drivers/misc/mei/Makefile b/drivers/misc/mei/Makefile
index 57168db..0017842 100644
--- a/drivers/misc/mei/Makefile
+++ b/drivers/misc/mei/Makefile
@@ -8,4 +8,5 @@
mei-objs += interface.o
mei-objs += iorw.o
mei-objs += main.o
+mei-objs += amthif.o
mei-objs += wd.o
diff --git a/drivers/misc/mei/amthif.c b/drivers/misc/mei/amthif.c
new file mode 100644
index 0000000..18794ae
--- /dev/null
+++ b/drivers/misc/mei/amthif.c
@@ -0,0 +1,722 @@
+/*
+ *
+ * Intel Management Engine Interface (Intel MEI) Linux driver
+ * Copyright (c) 2003-2012, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/fs.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/fcntl.h>
+#include <linux/aio.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/ioctl.h>
+#include <linux/cdev.h>
+#include <linux/list.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+#include <linux/uuid.h>
+#include <linux/jiffies.h>
+#include <linux/uaccess.h>
+
+
+#include "mei_dev.h"
+#include "hw.h"
+#include <linux/mei.h>
+#include "interface.h"
+
+const uuid_le mei_amthi_guid = UUID_LE(0x12f80028, 0xb4b7, 0x4b2d, 0xac,
+ 0xa8, 0x46, 0xe0, 0xff, 0x65,
+ 0x81, 0x4c);
+
+/**
+ * mei_amthif_reset_params - initializes mei device iamthif
+ *
+ * @dev: the device structure
+ */
+void mei_amthif_reset_params(struct mei_device *dev)
+{
+ /* reset iamthif parameters. */
+ dev->iamthif_current_cb = NULL;
+ dev->iamthif_msg_buf_size = 0;
+ dev->iamthif_msg_buf_index = 0;
+ dev->iamthif_canceled = false;
+ dev->iamthif_ioctl = false;
+ dev->iamthif_state = MEI_IAMTHIF_IDLE;
+ dev->iamthif_timer = 0;
+}
+
+/**
+ * mei_amthif_host_init_ - mei initialization amthif client.
+ *
+ * @dev: the device structure
+ *
+ */
+void mei_amthif_host_init(struct mei_device *dev)
+{
+ int i;
+ unsigned char *msg_buf;
+
+ mei_cl_init(&dev->iamthif_cl, dev);
+ dev->iamthif_cl.state = MEI_FILE_DISCONNECTED;
+
+ /* find ME amthi client */
+ i = mei_me_cl_link(dev, &dev->iamthif_cl,
+ &mei_amthi_guid, MEI_IAMTHIF_HOST_CLIENT_ID);
+ if (i < 0) {
+ dev_info(&dev->pdev->dev, "failed to find iamthif client.\n");
+ return;
+ }
+
+ /* Assign iamthif_mtu to the value received from ME */
+
+ dev->iamthif_mtu = dev->me_clients[i].props.max_msg_length;
+ dev_dbg(&dev->pdev->dev, "IAMTHIF_MTU = %d\n",
+ dev->me_clients[i].props.max_msg_length);
+
+ kfree(dev->iamthif_msg_buf);
+ dev->iamthif_msg_buf = NULL;
+
+ /* allocate storage for ME message buffer */
+ msg_buf = kcalloc(dev->iamthif_mtu,
+ sizeof(unsigned char), GFP_KERNEL);
+ if (!msg_buf) {
+ dev_dbg(&dev->pdev->dev, "memory allocation for ME message buffer failed.\n");
+ return;
+ }
+
+ dev->iamthif_msg_buf = msg_buf;
+
+ if (mei_connect(dev, &dev->iamthif_cl)) {
+ dev_dbg(&dev->pdev->dev, "Failed to connect to AMTHI client\n");
+ dev->iamthif_cl.state = MEI_FILE_DISCONNECTED;
+ dev->iamthif_cl.host_client_id = 0;
+ } else {
+ dev->iamthif_cl.timer_count = MEI_CONNECT_TIMEOUT;
+ }
+}
+
+/**
+ * mei_amthif_find_read_list_entry - finds a amthilist entry for current file
+ *
+ * @dev: the device structure
+ * @file: pointer to file object
+ *
+ * returns returned a list entry on success, NULL on failure.
+ */
+struct mei_cl_cb *mei_amthif_find_read_list_entry(struct mei_device *dev,
+ struct file *file)
+{
+ struct mei_cl_cb *pos = NULL;
+ struct mei_cl_cb *next = NULL;
+
+ list_for_each_entry_safe(pos, next,
+ &dev->amthif_rd_complete_list.list, list) {
+ if (pos->cl && pos->cl == &dev->iamthif_cl &&
+ pos->file_object == file)
+ return pos;
+ }
+ return NULL;
+}
+
+
+/**
+ * mei_amthif_read - read data from AMTHIF client
+ *
+ * @dev: the device structure
+ * @if_num: minor number
+ * @file: pointer to file object
+ * @*ubuf: pointer to user data in user space
+ * @length: data length to read
+ * @offset: data read offset
+ *
+ * Locking: called under "dev->device_lock" lock
+ *
+ * returns
+ * returned data length on success,
+ * zero if no data to read,
+ * negative on failure.
+ */
+int mei_amthif_read(struct mei_device *dev, struct file *file,
+ char __user *ubuf, size_t length, loff_t *offset)
+{
+ int rets;
+ int wait_ret;
+ struct mei_cl_cb *cb = NULL;
+ struct mei_cl *cl = file->private_data;
+ unsigned long timeout;
+ int i;
+
+ /* Only Posible if we are in timeout */
+ if (!cl || cl != &dev->iamthif_cl) {
+ dev_dbg(&dev->pdev->dev, "bad file ext.\n");
+ return -ETIMEDOUT;
+ }
+
+ i = mei_me_cl_by_id(dev, dev->iamthif_cl.me_client_id);
+
+ if (i < 0) {
+ dev_dbg(&dev->pdev->dev, "amthi client not found.\n");
+ return -ENODEV;
+ }
+ dev_dbg(&dev->pdev->dev, "checking amthi data\n");
+ cb = mei_amthif_find_read_list_entry(dev, file);
+
+ /* Check for if we can block or not*/
+ if (cb == NULL && file->f_flags & O_NONBLOCK)
+ return -EAGAIN;
+
+
+ dev_dbg(&dev->pdev->dev, "waiting for amthi data\n");
+ while (cb == NULL) {
+ /* unlock the Mutex */
+ mutex_unlock(&dev->device_lock);
+
+ wait_ret = wait_event_interruptible(dev->iamthif_cl.wait,
+ (cb = mei_amthif_find_read_list_entry(dev, file)));
+
+ if (wait_ret)
+ return -ERESTARTSYS;
+
+ dev_dbg(&dev->pdev->dev, "woke up from sleep\n");
+
+ /* Locking again the Mutex */
+ mutex_lock(&dev->device_lock);
+ }
+
+
+ dev_dbg(&dev->pdev->dev, "Got amthi data\n");
+ dev->iamthif_timer = 0;
+
+ if (cb) {
+ timeout = cb->read_time +
+ mei_secs_to_jiffies(MEI_IAMTHIF_READ_TIMER);
+ dev_dbg(&dev->pdev->dev, "amthi timeout = %lud\n",
+ timeout);
+
+ if (time_after(jiffies, timeout)) {
+ dev_dbg(&dev->pdev->dev, "amthi Time out\n");
+ /* 15 sec for the message has expired */
+ list_del(&cb->list);
+ rets = -ETIMEDOUT;
+ goto free;
+ }
+ }
+ /* if the whole message will fit remove it from the list */
+ if (cb->buf_idx >= *offset && length >= (cb->buf_idx - *offset))
+ list_del(&cb->list);
+ else if (cb->buf_idx > 0 && cb->buf_idx <= *offset) {
+ /* end of the message has been reached */
+ list_del(&cb->list);
+ rets = 0;
+ goto free;
+ }
+ /* else means that not full buffer will be read and do not
+ * remove message from deletion list
+ */
+
+ dev_dbg(&dev->pdev->dev, "amthi cb->response_buffer size - %d\n",
+ cb->response_buffer.size);
+ dev_dbg(&dev->pdev->dev, "amthi cb->buf_idx - %lu\n", cb->buf_idx);
+
+ /* length is being turncated to PAGE_SIZE, however,
+ * the buf_idx may point beyond */
+ length = min_t(size_t, length, (cb->buf_idx - *offset));
+
+ if (copy_to_user(ubuf, cb->response_buffer.data + *offset, length))
+ rets = -EFAULT;
+ else {
+ rets = length;
+ if ((*offset + length) < cb->buf_idx) {
+ *offset += length;
+ goto out;
+ }
+ }
+free:
+ dev_dbg(&dev->pdev->dev, "free amthi cb memory.\n");
+ *offset = 0;
+ mei_io_cb_free(cb);
+out:
+ return rets;
+}
+
+/**
+ * mei_amthif_send_cmd - send amthif command to the ME
+ *
+ * @dev: the device structure
+ * @cb: mei call back struct
+ *
+ * returns 0 on success, <0 on failure.
+ *
+ */
+static int mei_amthif_send_cmd(struct mei_device *dev, struct mei_cl_cb *cb)
+{
+ struct mei_msg_hdr mei_hdr;
+ int ret;
+
+ if (!dev || !cb)
+ return -ENODEV;
+
+ dev_dbg(&dev->pdev->dev, "write data to amthi client.\n");
+
+ dev->iamthif_state = MEI_IAMTHIF_WRITING;
+ dev->iamthif_current_cb = cb;
+ dev->iamthif_file_object = cb->file_object;
+ dev->iamthif_canceled = false;
+ dev->iamthif_ioctl = true;
+ dev->iamthif_msg_buf_size = cb->request_buffer.size;
+ memcpy(dev->iamthif_msg_buf, cb->request_buffer.data,
+ cb->request_buffer.size);
+
+ ret = mei_flow_ctrl_creds(dev, &dev->iamthif_cl);
+ if (ret < 0)
+ return ret;
+
+ if (ret && dev->mei_host_buffer_is_empty) {
+ ret = 0;
+ dev->mei_host_buffer_is_empty = false;
+ if (cb->request_buffer.size > mei_hbuf_max_data(dev)) {
+ mei_hdr.length = mei_hbuf_max_data(dev);
+ mei_hdr.msg_complete = 0;
+ } else {
+ mei_hdr.length = cb->request_buffer.size;
+ mei_hdr.msg_complete = 1;
+ }
+
+ mei_hdr.host_addr = dev->iamthif_cl.host_client_id;
+ mei_hdr.me_addr = dev->iamthif_cl.me_client_id;
+ mei_hdr.reserved = 0;
+ dev->iamthif_msg_buf_index += mei_hdr.length;
+ if (mei_write_message(dev, &mei_hdr,
+ (unsigned char *)(dev->iamthif_msg_buf),
+ mei_hdr.length))
+ return -ENODEV;
+
+ if (mei_hdr.msg_complete) {
+ if (mei_flow_ctrl_reduce(dev, &dev->iamthif_cl))
+ return -ENODEV;
+ dev->iamthif_flow_control_pending = true;
+ dev->iamthif_state = MEI_IAMTHIF_FLOW_CONTROL;
+ dev_dbg(&dev->pdev->dev, "add amthi cb to write waiting list\n");
+ dev->iamthif_current_cb = cb;
+ dev->iamthif_file_object = cb->file_object;
+ list_add_tail(&cb->list, &dev->write_waiting_list.list);
+ } else {
+ dev_dbg(&dev->pdev->dev, "message does not complete, so add amthi cb to write list.\n");
+ list_add_tail(&cb->list, &dev->write_list.list);
+ }
+ } else {
+ if (!(dev->mei_host_buffer_is_empty))
+ dev_dbg(&dev->pdev->dev, "host buffer is not empty");
+
+ dev_dbg(&dev->pdev->dev, "No flow control credentials, so add iamthif cb to write list.\n");
+ list_add_tail(&cb->list, &dev->write_list.list);
+ }
+ return 0;
+}
+
+/**
+ * mei_amthif_write - write amthif data to amthif client
+ *
+ * @dev: the device structure
+ * @cb: mei call back struct
+ *
+ * returns 0 on success, <0 on failure.
+ *
+ */
+int mei_amthif_write(struct mei_device *dev, struct mei_cl_cb *cb)
+{
+ int ret;
+
+ if (!dev || !cb)
+ return -ENODEV;
+
+ ret = mei_io_cb_alloc_resp_buf(cb, dev->iamthif_mtu);
+ if (ret)
+ return ret;
+
+ cb->fop_type = MEI_FOP_IOCTL;
+
+ if (!list_empty(&dev->amthif_cmd_list.list) ||
+ dev->iamthif_state != MEI_IAMTHIF_IDLE) {
+ dev_dbg(&dev->pdev->dev,
+ "amthif state = %d\n", dev->iamthif_state);
+ dev_dbg(&dev->pdev->dev, "AMTHIF: add cb to the wait list\n");
+ list_add_tail(&cb->list, &dev->amthif_cmd_list.list);
+ return 0;
+ }
+ return mei_amthif_send_cmd(dev, cb);
+}
+/**
+ * mei_amthif_run_next_cmd
+ *
+ * @dev: the device structure
+ *
+ * returns 0 on success, <0 on failure.
+ */
+void mei_amthif_run_next_cmd(struct mei_device *dev)
+{
+ struct mei_cl_cb *pos = NULL;
+ struct mei_cl_cb *next = NULL;
+ int status;
+
+ if (!dev)
+ return;
+
+ dev->iamthif_msg_buf_size = 0;
+ dev->iamthif_msg_buf_index = 0;
+ dev->iamthif_canceled = false;
+ dev->iamthif_ioctl = true;
+ dev->iamthif_state = MEI_IAMTHIF_IDLE;
+ dev->iamthif_timer = 0;
+ dev->iamthif_file_object = NULL;
+
+ dev_dbg(&dev->pdev->dev, "complete amthi cmd_list cb.\n");
+
+ list_for_each_entry_safe(pos, next, &dev->amthif_cmd_list.list, list) {
+ list_del(&pos->list);
+
+ if (pos->cl && pos->cl == &dev->iamthif_cl) {
+ status = mei_amthif_send_cmd(dev, pos);
+ if (status) {
+ dev_dbg(&dev->pdev->dev,
+ "amthi write failed status = %d\n",
+ status);
+ return;
+ }
+ break;
+ }
+ }
+}
+
+
+unsigned int mei_amthif_poll(struct mei_device *dev,
+ struct file *file, poll_table *wait)
+{
+ unsigned int mask = 0;
+ mutex_unlock(&dev->device_lock);
+ poll_wait(file, &dev->iamthif_cl.wait, wait);
+ mutex_lock(&dev->device_lock);
+ if (dev->iamthif_state == MEI_IAMTHIF_READ_COMPLETE &&
+ dev->iamthif_file_object == file) {
+ mask |= (POLLIN | POLLRDNORM);
+ dev_dbg(&dev->pdev->dev, "run next amthi cb\n");
+ mei_amthif_run_next_cmd(dev);
+ }
+ return mask;
+}
+
+
+
+/**
+ * mei_amthif_irq_process_completed - processes completed iamthif operation.
+ *
+ * @dev: the device structure.
+ * @slots: free slots.
+ * @cb_pos: callback block.
+ * @cl: private data of the file object.
+ * @cmpl_list: complete list.
+ *
+ * returns 0, OK; otherwise, error.
+ */
+int mei_amthif_irq_write_complete(struct mei_device *dev, s32 *slots,
+ struct mei_cl_cb *cb, struct mei_cl_cb *cmpl_list)
+{
+ struct mei_msg_hdr *mei_hdr;
+ struct mei_cl *cl = cb->cl;
+ size_t len = dev->iamthif_msg_buf_size - dev->iamthif_msg_buf_index;
+ size_t msg_slots = mei_data2slots(len);
+
+ mei_hdr = (struct mei_msg_hdr *)&dev->wr_msg_buf[0];
+ mei_hdr->host_addr = cl->host_client_id;
+ mei_hdr->me_addr = cl->me_client_id;
+ mei_hdr->reserved = 0;
+
+ if (*slots >= msg_slots) {
+ mei_hdr->length = len;
+ mei_hdr->msg_complete = 1;
+ /* Split the message only if we can write the whole host buffer */
+ } else if (*slots == dev->hbuf_depth) {
+ msg_slots = *slots;
+ len = (*slots * sizeof(u32)) - sizeof(struct mei_msg_hdr);
+ mei_hdr->length = len;
+ mei_hdr->msg_complete = 0;
+ } else {
+ /* wait for next time the host buffer is empty */
+ return 0;
+ }
+
+ dev_dbg(&dev->pdev->dev, "msg: len = %d complete = %d\n",
+ mei_hdr->length, mei_hdr->msg_complete);
+
+ *slots -= msg_slots;
+ if (mei_write_message(dev, mei_hdr,
+ dev->iamthif_msg_buf + dev->iamthif_msg_buf_index,
+ mei_hdr->length)) {
+ dev->iamthif_state = MEI_IAMTHIF_IDLE;
+ cl->status = -ENODEV;
+ list_del(&cb->list);
+ return -ENODEV;
+ }
+
+ if (mei_flow_ctrl_reduce(dev, cl))
+ return -ENODEV;
+
+ dev->iamthif_msg_buf_index += mei_hdr->length;
+ cl->status = 0;
+
+ if (mei_hdr->msg_complete) {
+ dev->iamthif_state = MEI_IAMTHIF_FLOW_CONTROL;
+ dev->iamthif_flow_control_pending = true;
+
+ /* save iamthif cb sent to amthi client */
+ cb->buf_idx = dev->iamthif_msg_buf_index;
+ dev->iamthif_current_cb = cb;
+
+ list_move_tail(&cb->list, &dev->write_waiting_list.list);
+ }
+
+
+ return 0;
+}
+
+/**
+ * mei_amthif_irq_read_message - read routine after ISR to
+ * handle the read amthi message
+ *
+ * @complete_list: An instance of our list structure
+ * @dev: the device structure
+ * @mei_hdr: header of amthi message
+ *
+ * returns 0 on success, <0 on failure.
+ */
+int mei_amthif_irq_read_message(struct mei_cl_cb *complete_list,
+ struct mei_device *dev, struct mei_msg_hdr *mei_hdr)
+{
+ struct mei_cl_cb *cb;
+ unsigned char *buffer;
+
+ BUG_ON(mei_hdr->me_addr != dev->iamthif_cl.me_client_id);
+ BUG_ON(dev->iamthif_state != MEI_IAMTHIF_READING);
+
+ buffer = dev->iamthif_msg_buf + dev->iamthif_msg_buf_index;
+ BUG_ON(dev->iamthif_mtu < dev->iamthif_msg_buf_index + mei_hdr->length);
+
+ mei_read_slots(dev, buffer, mei_hdr->length);
+
+ dev->iamthif_msg_buf_index += mei_hdr->length;
+
+ if (!mei_hdr->msg_complete)
+ return 0;
+
+ dev_dbg(&dev->pdev->dev,
+ "amthi_message_buffer_index =%d\n",
+ mei_hdr->length);
+
+ dev_dbg(&dev->pdev->dev, "completed amthi read.\n ");
+ if (!dev->iamthif_current_cb)
+ return -ENODEV;
+
+ cb = dev->iamthif_current_cb;
+ dev->iamthif_current_cb = NULL;
+
+ if (!cb->cl)
+ return -ENODEV;
+
+ dev->iamthif_stall_timer = 0;
+ cb->buf_idx = dev->iamthif_msg_buf_index;
+ cb->read_time = jiffies;
+ if (dev->iamthif_ioctl && cb->cl == &dev->iamthif_cl) {
+ /* found the iamthif cb */
+ dev_dbg(&dev->pdev->dev, "complete the amthi read cb.\n ");
+ dev_dbg(&dev->pdev->dev, "add the amthi read cb to complete.\n ");
+ list_add_tail(&cb->list, &complete_list->list);
+ }
+ return 0;
+}
+
+/**
+ * mei_amthif_irq_read - prepares to read amthif data.
+ *
+ * @dev: the device structure.
+ * @slots: free slots.
+ *
+ * returns 0, OK; otherwise, error.
+ */
+int mei_amthif_irq_read(struct mei_device *dev, s32 *slots)
+{
+
+ if (((*slots) * sizeof(u32)) < (sizeof(struct mei_msg_hdr)
+ + sizeof(struct hbm_flow_control))) {
+ return -EMSGSIZE;
+ }
+ *slots -= mei_data2slots(sizeof(struct hbm_flow_control));
+ if (mei_send_flow_control(dev, &dev->iamthif_cl)) {
+ dev_dbg(&dev->pdev->dev, "iamthif flow control failed\n");
+ return -EIO;
+ }
+
+ dev_dbg(&dev->pdev->dev, "iamthif flow control success\n");
+ dev->iamthif_state = MEI_IAMTHIF_READING;
+ dev->iamthif_flow_control_pending = false;
+ dev->iamthif_msg_buf_index = 0;
+ dev->iamthif_msg_buf_size = 0;
+ dev->iamthif_stall_timer = MEI_IAMTHIF_STALL_TIMER;
+ dev->mei_host_buffer_is_empty = mei_hbuf_is_empty(dev);
+ return 0;
+}
+
+/**
+ * mei_amthif_complete - complete amthif callback.
+ *
+ * @dev: the device structure.
+ * @cb_pos: callback block.
+ */
+void mei_amthif_complete(struct mei_device *dev, struct mei_cl_cb *cb)
+{
+ if (dev->iamthif_canceled != 1) {
+ dev->iamthif_state = MEI_IAMTHIF_READ_COMPLETE;
+ dev->iamthif_stall_timer = 0;
+ memcpy(cb->response_buffer.data,
+ dev->iamthif_msg_buf,
+ dev->iamthif_msg_buf_index);
+ list_add_tail(&cb->list, &dev->amthif_rd_complete_list.list);
+ dev_dbg(&dev->pdev->dev, "amthi read completed\n");
+ dev->iamthif_timer = jiffies;
+ dev_dbg(&dev->pdev->dev, "dev->iamthif_timer = %ld\n",
+ dev->iamthif_timer);
+ } else {
+ mei_amthif_run_next_cmd(dev);
+ }
+
+ dev_dbg(&dev->pdev->dev, "completing amthi call back.\n");
+ wake_up_interruptible(&dev->iamthif_cl.wait);
+}
+
+/**
+ * mei_clear_list - removes all callbacks associated with file
+ * from mei_cb_list
+ *
+ * @dev: device structure.
+ * @file: file structure
+ * @mei_cb_list: callbacks list
+ *
+ * mei_clear_list is called to clear resources associated with file
+ * when application calls close function or Ctrl-C was pressed
+ *
+ * returns true if callback removed from the list, false otherwise
+ */
+static bool mei_clear_list(struct mei_device *dev,
+ const struct file *file, struct list_head *mei_cb_list)
+{
+ struct mei_cl_cb *cb_pos = NULL;
+ struct mei_cl_cb *cb_next = NULL;
+ bool removed = false;
+
+ /* list all list member */
+ list_for_each_entry_safe(cb_pos, cb_next, mei_cb_list, list) {
+ /* check if list member associated with a file */
+ if (file == cb_pos->file_object) {
+ /* remove member from the list */
+ list_del(&cb_pos->list);
+ /* check if cb equal to current iamthif cb */
+ if (dev->iamthif_current_cb == cb_pos) {
+ dev->iamthif_current_cb = NULL;
+ /* send flow control to iamthif client */
+ mei_send_flow_control(dev, &dev->iamthif_cl);
+ }
+ /* free all allocated buffers */
+ mei_io_cb_free(cb_pos);
+ cb_pos = NULL;
+ removed = true;
+ }
+ }
+ return removed;
+}
+
+/**
+ * mei_clear_lists - removes all callbacks associated with file
+ *
+ * @dev: device structure
+ * @file: file structure
+ *
+ * mei_clear_lists is called to clear resources associated with file
+ * when application calls close function or Ctrl-C was pressed
+ *
+ * returns true if callback removed from the list, false otherwise
+ */
+static bool mei_clear_lists(struct mei_device *dev, struct file *file)
+{
+ bool removed = false;
+
+ /* remove callbacks associated with a file */
+ mei_clear_list(dev, file, &dev->amthif_cmd_list.list);
+ if (mei_clear_list(dev, file, &dev->amthif_rd_complete_list.list))
+ removed = true;
+
+ mei_clear_list(dev, file, &dev->ctrl_rd_list.list);
+
+ if (mei_clear_list(dev, file, &dev->ctrl_wr_list.list))
+ removed = true;
+
+ if (mei_clear_list(dev, file, &dev->write_waiting_list.list))
+ removed = true;
+
+ if (mei_clear_list(dev, file, &dev->write_list.list))
+ removed = true;
+
+ /* check if iamthif_current_cb not NULL */
+ if (dev->iamthif_current_cb && !removed) {
+ /* check file and iamthif current cb association */
+ if (dev->iamthif_current_cb->file_object == file) {
+ /* remove cb */
+ mei_io_cb_free(dev->iamthif_current_cb);
+ dev->iamthif_current_cb = NULL;
+ removed = true;
+ }
+ }
+ return removed;
+}
+
+/**
+* mei_amthif_release - the release function
+*
+* @inode: pointer to inode structure
+* @file: pointer to file structure
+*
+* returns 0 on success, <0 on error
+*/
+int mei_amthif_release(struct mei_device *dev, struct file *file)
+{
+ if (dev->open_handle_count > 0)
+ dev->open_handle_count--;
+
+ if (dev->iamthif_file_object == file &&
+ dev->iamthif_state != MEI_IAMTHIF_IDLE) {
+
+ dev_dbg(&dev->pdev->dev, "amthi canceled iamthif state %d\n",
+ dev->iamthif_state);
+ dev->iamthif_canceled = true;
+ if (dev->iamthif_state == MEI_IAMTHIF_READ_COMPLETE) {
+ dev_dbg(&dev->pdev->dev, "run next amthi iamthif cb\n");
+ mei_amthif_run_next_cmd(dev);
+ }
+ }
+
+ if (mei_clear_lists(dev, file))
+ dev->iamthif_state = MEI_IAMTHIF_IDLE;
+
+ return 0;
+}
diff --git a/drivers/misc/mei/hw.h b/drivers/misc/mei/hw.h
index 9700532..be8ca6b 100644
--- a/drivers/misc/mei/hw.h
+++ b/drivers/misc/mei/hw.h
@@ -20,16 +20,16 @@
#include <linux/uuid.h>
/*
- * Timeouts
+ * Timeouts in Seconds
*/
-#define MEI_INTEROP_TIMEOUT (HZ * 7)
-#define MEI_CONNECT_TIMEOUT 3 /* at least 2 seconds */
+#define MEI_INTEROP_TIMEOUT 7 /* Timeout on ready message */
+#define MEI_CONNECT_TIMEOUT 3 /* HPS: at least 2 seconds */
-#define CONNECT_TIMEOUT 15 /* HPS definition */
-#define INIT_CLIENTS_TIMEOUT 15 /* HPS definition */
+#define MEI_CL_CONNECT_TIMEOUT 15 /* HPS: Client Connect Timeout */
+#define MEI_CLIENTS_INIT_TIMEOUT 15 /* HPS: Clients Enumeration Timeout */
-#define IAMTHIF_STALL_TIMER 12 /* seconds */
-#define IAMTHIF_READ_TIMER 10000 /* ms */
+#define MEI_IAMTHIF_STALL_TIMER 12 /* HPS */
+#define MEI_IAMTHIF_READ_TIMER 10 /* HPS */
/*
* Internal Clients Number
@@ -293,6 +293,14 @@
struct mei_client_properties client_properties;
} __packed;
+/**
+ * struct hbm_client_connect_request - connect/disconnect request
+ *
+ * @hbm_cmd - bus message command header
+ * @me_addr - address of the client in ME
+ * @host_addr - address of the client in the driver
+ * @reserved
+ */
struct hbm_client_connect_request {
u8 hbm_cmd;
u8 me_addr;
@@ -300,6 +308,14 @@
u8 reserved;
} __packed;
+/**
+ * struct hbm_client_connect_response - connect/disconnect response
+ *
+ * @hbm_cmd - bus message command header
+ * @me_addr - address of the client in ME
+ * @host_addr - address of the client in the driver
+ * @status - status of the request
+ */
struct hbm_client_connect_response {
u8 hbm_cmd;
u8 me_addr;
@@ -307,12 +323,6 @@
u8 status;
} __packed;
-struct hbm_client_disconnect_request {
- u8 hbm_cmd;
- u8 me_addr;
- u8 host_addr;
- u8 reserved[1];
-} __packed;
#define MEI_FC_MESSAGE_RESERVED_LENGTH 5
diff --git a/drivers/misc/mei/init.c b/drivers/misc/mei/init.c
index 98f1430..a54cd55 100644
--- a/drivers/misc/mei/init.c
+++ b/drivers/misc/mei/init.c
@@ -43,21 +43,6 @@
}
-const uuid_le mei_amthi_guid = UUID_LE(0x12f80028, 0xb4b7, 0x4b2d, 0xac,
- 0xa8, 0x46, 0xe0, 0xff, 0x65,
- 0x81, 0x4c);
-
-/**
- * mei_io_list_init - Sets up a queue list.
- *
- * @list: An instance io list structure
- * @dev: the device structure
- */
-void mei_io_list_init(struct mei_io_list *list)
-{
- /* initialize our queue list */
- INIT_LIST_HEAD(&list->mei_cb.cb_list);
-}
/**
* mei_io_list_flush - removes list entry belonging to cl.
@@ -65,17 +50,15 @@
* @list: An instance of our list structure
* @cl: private data of the file object
*/
-void mei_io_list_flush(struct mei_io_list *list, struct mei_cl *cl)
+void mei_io_list_flush(struct mei_cl_cb *list, struct mei_cl *cl)
{
struct mei_cl_cb *pos;
struct mei_cl_cb *next;
- list_for_each_entry_safe(pos, next, &list->mei_cb.cb_list, cb_list) {
- if (pos->file_private) {
- struct mei_cl *cl_tmp;
- cl_tmp = (struct mei_cl *)pos->file_private;
- if (mei_cl_cmp_id(cl, cl_tmp))
- list_del(&pos->cb_list);
+ list_for_each_entry_safe(pos, next, &list->list, list) {
+ if (pos->cl) {
+ if (mei_cl_cmp_id(cl, pos->cl))
+ list_del(&pos->list);
}
}
}
@@ -96,31 +79,14 @@
mei_io_list_flush(&cl->dev->write_waiting_list, cl);
mei_io_list_flush(&cl->dev->ctrl_wr_list, cl);
mei_io_list_flush(&cl->dev->ctrl_rd_list, cl);
- mei_io_list_flush(&cl->dev->amthi_cmd_list, cl);
- mei_io_list_flush(&cl->dev->amthi_read_complete_list, cl);
+ mei_io_list_flush(&cl->dev->amthif_cmd_list, cl);
+ mei_io_list_flush(&cl->dev->amthif_rd_complete_list, cl);
return 0;
}
/**
- * mei_reset_iamthif_params - initializes mei device iamthif
- *
- * @dev: the device structure
- */
-static void mei_reset_iamthif_params(struct mei_device *dev)
-{
- /* reset iamthif parameters. */
- dev->iamthif_current_cb = NULL;
- dev->iamthif_msg_buf_size = 0;
- dev->iamthif_msg_buf_index = 0;
- dev->iamthif_canceled = false;
- dev->iamthif_ioctl = false;
- dev->iamthif_state = MEI_IAMTHIF_IDLE;
- dev->iamthif_timer = 0;
-}
-
-/**
* init_mei_device - allocates and initializes the mei device structure
*
* @pdev: The pci device structure
@@ -144,16 +110,14 @@
init_waitqueue_head(&dev->wait_stop_wd);
dev->dev_state = MEI_DEV_INITIALIZING;
dev->iamthif_state = MEI_IAMTHIF_IDLE;
- dev->wd_interface_reg = false;
-
mei_io_list_init(&dev->read_list);
mei_io_list_init(&dev->write_list);
mei_io_list_init(&dev->write_waiting_list);
mei_io_list_init(&dev->ctrl_wr_list);
mei_io_list_init(&dev->ctrl_rd_list);
- mei_io_list_init(&dev->amthi_cmd_list);
- mei_io_list_init(&dev->amthi_read_complete_list);
+ mei_io_list_init(&dev->amthif_cmd_list);
+ mei_io_list_init(&dev->amthif_rd_complete_list);
dev->pdev = pdev;
return dev;
}
@@ -196,7 +160,8 @@
if (!dev->recvd_msg) {
mutex_unlock(&dev->device_lock);
err = wait_event_interruptible_timeout(dev->wait_recvd_msg,
- dev->recvd_msg, MEI_INTEROP_TIMEOUT);
+ dev->recvd_msg,
+ mei_secs_to_jiffies(MEI_INTEROP_TIMEOUT));
mutex_lock(&dev->device_lock);
}
@@ -317,15 +282,13 @@
cl_pos->timer_count = 0;
}
/* remove entry if already in list */
- dev_dbg(&dev->pdev->dev, "list del iamthif and wd file list.\n");
- mei_remove_client_from_file_list(dev,
- dev->wd_cl.host_client_id);
+ dev_dbg(&dev->pdev->dev, "remove iamthif and wd from the file list.\n");
+ mei_me_cl_unlink(dev, &dev->wd_cl);
- mei_remove_client_from_file_list(dev,
- dev->iamthif_cl.host_client_id);
+ mei_me_cl_unlink(dev, &dev->iamthif_cl);
- mei_reset_iamthif_params(dev);
- dev->extra_write_index = 0;
+ mei_amthif_reset_params(dev);
+ memset(&dev->wr_ext_msg, 0, sizeof(dev->wr_ext_msg));
}
dev->me_clients_num = 0;
@@ -351,10 +314,9 @@
}
}
/* remove all waiting requests */
- list_for_each_entry_safe(cb_pos, cb_next,
- &dev->write_list.mei_cb.cb_list, cb_list) {
- list_del(&cb_pos->cb_list);
- mei_free_cb_private(cb_pos);
+ list_for_each_entry_safe(cb_pos, cb_next, &dev->write_list.list, list) {
+ list_del(&cb_pos->list);
+ mei_io_cb_free(cb_pos);
}
}
@@ -370,31 +332,26 @@
void mei_host_start_message(struct mei_device *dev)
{
struct mei_msg_hdr *mei_hdr;
- struct hbm_host_version_request *host_start_req;
+ struct hbm_host_version_request *start_req;
+ const size_t len = sizeof(struct hbm_host_version_request);
+
+ mei_hdr = mei_hbm_hdr(&dev->wr_msg_buf[0], len);
/* host start message */
- mei_hdr = (struct mei_msg_hdr *) &dev->wr_msg_buf[0];
- mei_hdr->host_addr = 0;
- mei_hdr->me_addr = 0;
- mei_hdr->length = sizeof(struct hbm_host_version_request);
- mei_hdr->msg_complete = 1;
- mei_hdr->reserved = 0;
+ start_req = (struct hbm_host_version_request *)&dev->wr_msg_buf[1];
+ memset(start_req, 0, len);
+ start_req->hbm_cmd = HOST_START_REQ_CMD;
+ start_req->host_version.major_version = HBM_MAJOR_VERSION;
+ start_req->host_version.minor_version = HBM_MINOR_VERSION;
- host_start_req =
- (struct hbm_host_version_request *) &dev->wr_msg_buf[1];
- memset(host_start_req, 0, sizeof(struct hbm_host_version_request));
- host_start_req->hbm_cmd = HOST_START_REQ_CMD;
- host_start_req->host_version.major_version = HBM_MAJOR_VERSION;
- host_start_req->host_version.minor_version = HBM_MINOR_VERSION;
dev->recvd_msg = false;
- if (mei_write_message(dev, mei_hdr, (unsigned char *)host_start_req,
- mei_hdr->length)) {
+ if (mei_write_message(dev, mei_hdr, (unsigned char *)start_req, len)) {
dev_dbg(&dev->pdev->dev, "write send version message to FW fail.\n");
dev->dev_state = MEI_DEV_RESETING;
mei_reset(dev, 1);
}
dev->init_clients_state = MEI_START_MESSAGE;
- dev->init_clients_timer = INIT_CLIENTS_TIMEOUT;
+ dev->init_clients_timer = MEI_CLIENTS_INIT_TIMEOUT;
return ;
}
@@ -408,26 +365,22 @@
void mei_host_enum_clients_message(struct mei_device *dev)
{
struct mei_msg_hdr *mei_hdr;
- struct hbm_host_enum_request *host_enum_req;
- mei_hdr = (struct mei_msg_hdr *) &dev->wr_msg_buf[0];
+ struct hbm_host_enum_request *enum_req;
+ const size_t len = sizeof(struct hbm_host_enum_request);
/* enumerate clients */
- mei_hdr->host_addr = 0;
- mei_hdr->me_addr = 0;
- mei_hdr->length = sizeof(struct hbm_host_enum_request);
- mei_hdr->msg_complete = 1;
- mei_hdr->reserved = 0;
+ mei_hdr = mei_hbm_hdr(&dev->wr_msg_buf[0], len);
- host_enum_req = (struct hbm_host_enum_request *) &dev->wr_msg_buf[1];
- memset(host_enum_req, 0, sizeof(struct hbm_host_enum_request));
- host_enum_req->hbm_cmd = HOST_ENUM_REQ_CMD;
- if (mei_write_message(dev, mei_hdr, (unsigned char *)host_enum_req,
- mei_hdr->length)) {
+ enum_req = (struct hbm_host_enum_request *) &dev->wr_msg_buf[1];
+ memset(enum_req, 0, sizeof(struct hbm_host_enum_request));
+ enum_req->hbm_cmd = HOST_ENUM_REQ_CMD;
+
+ if (mei_write_message(dev, mei_hdr, (unsigned char *)enum_req, len)) {
dev->dev_state = MEI_DEV_RESETING;
dev_dbg(&dev->pdev->dev, "write send enumeration request message to FW fail.\n");
mei_reset(dev, 1);
}
dev->init_clients_state = MEI_ENUM_CLIENTS_MESSAGE;
- dev->init_clients_timer = INIT_CLIENTS_TIMEOUT;
+ dev->init_clients_timer = MEI_CLIENTS_INIT_TIMEOUT;
return;
}
@@ -470,56 +423,87 @@
dev->me_clients = clients;
return ;
}
-/**
- * host_client_properties - reads properties for client
- *
- * @dev: the device structure
- *
- * returns:
- * < 0 - Error.
- * = 0 - no more clients.
- * = 1 - still have clients to send properties request.
- */
-int mei_host_client_properties(struct mei_device *dev)
+
+void mei_host_client_init(struct work_struct *work)
{
- struct mei_msg_hdr *mei_header;
- struct hbm_props_request *host_cli_req;
- int b;
- u8 client_num = dev->me_client_presentation_num;
+ struct mei_device *dev = container_of(work,
+ struct mei_device, init_work);
+ struct mei_client_properties *client_props;
+ int i;
- b = dev->me_client_index;
- b = find_next_bit(dev->me_clients_map, MEI_CLIENTS_MAX, b);
- if (b < MEI_CLIENTS_MAX) {
- dev->me_clients[client_num].client_id = b;
- dev->me_clients[client_num].mei_flow_ctrl_creds = 0;
- mei_header = (struct mei_msg_hdr *)&dev->wr_msg_buf[0];
- mei_header->host_addr = 0;
- mei_header->me_addr = 0;
- mei_header->length = sizeof(struct hbm_props_request);
- mei_header->msg_complete = 1;
- mei_header->reserved = 0;
+ mutex_lock(&dev->device_lock);
- host_cli_req = (struct hbm_props_request *)&dev->wr_msg_buf[1];
+ bitmap_zero(dev->host_clients_map, MEI_CLIENTS_MAX);
+ dev->open_handle_count = 0;
- memset(host_cli_req, 0, sizeof(struct hbm_props_request));
+ /*
+ * Reserving the first three client IDs
+ * 0: Reserved for MEI Bus Message communications
+ * 1: Reserved for Watchdog
+ * 2: Reserved for AMTHI
+ */
+ bitmap_set(dev->host_clients_map, 0, 3);
- host_cli_req->hbm_cmd = HOST_CLIENT_PROPERTIES_REQ_CMD;
- host_cli_req->address = b;
+ for (i = 0; i < dev->me_clients_num; i++) {
+ client_props = &dev->me_clients[i].props;
- if (mei_write_message(dev, mei_header,
- (unsigned char *)host_cli_req,
- mei_header->length)) {
- dev->dev_state = MEI_DEV_RESETING;
- dev_dbg(&dev->pdev->dev, "write send enumeration request message to FW fail.\n");
- mei_reset(dev, 1);
- return -EIO;
- }
-
- dev->init_clients_timer = INIT_CLIENTS_TIMEOUT;
- dev->me_client_index = b;
- return 1;
+ if (!uuid_le_cmp(client_props->protocol_name, mei_amthi_guid))
+ mei_amthif_host_init(dev);
+ else if (!uuid_le_cmp(client_props->protocol_name, mei_wd_guid))
+ mei_wd_host_init(dev);
}
+ dev->dev_state = MEI_DEV_ENABLED;
+
+ mutex_unlock(&dev->device_lock);
+}
+
+int mei_host_client_enumerate(struct mei_device *dev)
+{
+
+ struct mei_msg_hdr *mei_hdr;
+ struct hbm_props_request *prop_req;
+ const size_t len = sizeof(struct hbm_props_request);
+ unsigned long next_client_index;
+ u8 client_num;
+
+
+ client_num = dev->me_client_presentation_num;
+
+ next_client_index = find_next_bit(dev->me_clients_map, MEI_CLIENTS_MAX,
+ dev->me_client_index);
+
+ /* We got all client properties */
+ if (next_client_index == MEI_CLIENTS_MAX) {
+ schedule_work(&dev->init_work);
+
+ return 0;
+ }
+
+ dev->me_clients[client_num].client_id = next_client_index;
+ dev->me_clients[client_num].mei_flow_ctrl_creds = 0;
+
+ mei_hdr = mei_hbm_hdr(&dev->wr_msg_buf[0], len);
+ prop_req = (struct hbm_props_request *)&dev->wr_msg_buf[1];
+
+ memset(prop_req, 0, sizeof(struct hbm_props_request));
+
+
+ prop_req->hbm_cmd = HOST_CLIENT_PROPERTIES_REQ_CMD;
+ prop_req->address = next_client_index;
+
+ if (mei_write_message(dev, mei_hdr, (unsigned char *) prop_req,
+ mei_hdr->length)) {
+ dev->dev_state = MEI_DEV_RESETING;
+ dev_err(&dev->pdev->dev, "Properties request command failed\n");
+ mei_reset(dev, 1);
+
+ return -EIO;
+ }
+
+ dev->init_clients_timer = MEI_CLIENTS_INIT_TIMEOUT;
+ dev->me_client_index = next_client_index;
+
return 0;
}
@@ -557,17 +541,20 @@
/**
- * mei_me_cl_update_filext - searches for ME client guid
- * sets client_id in mei_file_private if found
- * @dev: the device structure
- * @cl: private file structure to set client_id in
- * @cuuid: searched uuid of ME client
- * @client_id: id of host client to be set in file private structure
+ * mei_me_cl_link - create link between host and me clinet and add
+ * me_cl to the list
*
- * returns ME client index
+ * @dev: the device structure
+ * @cl: link between me and host client assocated with opened file descriptor
+ * @cuuid: uuid of ME client
+ * @client_id: id of the host client
+ *
+ * returns ME client index if ME client
+ * -EINVAL on incorrect values
+ * -ENONET if client not found
*/
-int mei_me_cl_update_filext(struct mei_device *dev, struct mei_cl *cl,
- const uuid_le *cuuid, u8 host_cl_id)
+int mei_me_cl_link(struct mei_device *dev, struct mei_cl *cl,
+ const uuid_le *cuuid, u8 host_cl_id)
{
int i;
@@ -587,54 +574,22 @@
return -ENOENT;
}
-
/**
- * host_init_iamthif - mei initialization iamthif client.
+ * mei_me_cl_unlink - remove me_cl from the list
*
* @dev: the device structure
- *
+ * @host_client_id: host client id to be removed
*/
-void mei_host_init_iamthif(struct mei_device *dev)
+void mei_me_cl_unlink(struct mei_device *dev, struct mei_cl *cl)
{
- int i;
- unsigned char *msg_buf;
-
- mei_cl_init(&dev->iamthif_cl, dev);
- dev->iamthif_cl.state = MEI_FILE_DISCONNECTED;
-
- /* find ME amthi client */
- i = mei_me_cl_update_filext(dev, &dev->iamthif_cl,
- &mei_amthi_guid, MEI_IAMTHIF_HOST_CLIENT_ID);
- if (i < 0) {
- dev_dbg(&dev->pdev->dev, "failed to find iamthif client.\n");
- return;
- }
-
- /* Assign iamthif_mtu to the value received from ME */
-
- dev->iamthif_mtu = dev->me_clients[i].props.max_msg_length;
- dev_dbg(&dev->pdev->dev, "IAMTHIF_MTU = %d\n",
- dev->me_clients[i].props.max_msg_length);
-
- kfree(dev->iamthif_msg_buf);
- dev->iamthif_msg_buf = NULL;
-
- /* allocate storage for ME message buffer */
- msg_buf = kcalloc(dev->iamthif_mtu,
- sizeof(unsigned char), GFP_KERNEL);
- if (!msg_buf) {
- dev_dbg(&dev->pdev->dev, "memory allocation for ME message buffer failed.\n");
- return;
- }
-
- dev->iamthif_msg_buf = msg_buf;
-
- if (mei_connect(dev, &dev->iamthif_cl)) {
- dev_dbg(&dev->pdev->dev, "Failed to connect to AMTHI client\n");
- dev->iamthif_cl.state = MEI_FILE_DISCONNECTED;
- dev->iamthif_cl.host_client_id = 0;
- } else {
- dev->iamthif_cl.timer_count = CONNECT_TIMEOUT;
+ struct mei_cl *pos, *next;
+ list_for_each_entry_safe(pos, next, &dev->file_list, link) {
+ if (cl->host_client_id == pos->host_client_id) {
+ dev_dbg(&dev->pdev->dev, "remove host client = %d, ME client = %d\n",
+ pos->host_client_id, pos->me_client_id);
+ list_del_init(&pos->link);
+ break;
+ }
}
}
@@ -671,9 +626,8 @@
*/
int mei_disconnect_host_client(struct mei_device *dev, struct mei_cl *cl)
{
- int rets, err;
- long timeout = 15; /* 15 seconds */
struct mei_cl_cb *cb;
+ int rets, err;
if (!dev || !cl)
return -ENODEV;
@@ -681,13 +635,11 @@
if (cl->state != MEI_FILE_DISCONNECTING)
return 0;
- cb = kzalloc(sizeof(struct mei_cl_cb), GFP_KERNEL);
+ cb = mei_io_cb_init(cl, NULL);
if (!cb)
return -ENOMEM;
- INIT_LIST_HEAD(&cb->cb_list);
- cb->file_private = cl;
- cb->major_file_operations = MEI_CLOSE;
+ cb->fop_type = MEI_FOP_CLOSE;
if (dev->mei_host_buffer_is_empty) {
dev->mei_host_buffer_is_empty = false;
if (mei_disconnect(dev, cl)) {
@@ -696,17 +648,17 @@
goto free;
}
mdelay(10); /* Wait for hardware disconnection ready */
- list_add_tail(&cb->cb_list, &dev->ctrl_rd_list.mei_cb.cb_list);
+ list_add_tail(&cb->list, &dev->ctrl_rd_list.list);
} else {
dev_dbg(&dev->pdev->dev, "add disconnect cb to control write list\n");
- list_add_tail(&cb->cb_list,
- &dev->ctrl_wr_list.mei_cb.cb_list);
+ list_add_tail(&cb->list, &dev->ctrl_wr_list.list);
+
}
mutex_unlock(&dev->device_lock);
err = wait_event_timeout(dev->wait_recvd_msg,
- (MEI_FILE_DISCONNECTED == cl->state),
- timeout * HZ);
+ MEI_FILE_DISCONNECTED == cl->state,
+ mei_secs_to_jiffies(MEI_CL_CONNECT_TIMEOUT));
mutex_lock(&dev->device_lock);
if (MEI_FILE_DISCONNECTED == cl->state) {
@@ -728,29 +680,7 @@
mei_io_list_flush(&dev->ctrl_rd_list, cl);
mei_io_list_flush(&dev->ctrl_wr_list, cl);
free:
- mei_free_cb_private(cb);
+ mei_io_cb_free(cb);
return rets;
}
-/**
- * mei_remove_client_from_file_list -
- * removes file private data from device file list
- *
- * @dev: the device structure
- * @host_client_id: host client id to be removed
- */
-void mei_remove_client_from_file_list(struct mei_device *dev,
- u8 host_client_id)
-{
- struct mei_cl *cl_pos = NULL;
- struct mei_cl *cl_next = NULL;
- list_for_each_entry_safe(cl_pos, cl_next, &dev->file_list, link) {
- if (host_client_id == cl_pos->host_client_id) {
- dev_dbg(&dev->pdev->dev, "remove host client = %d, ME client = %d\n",
- cl_pos->host_client_id,
- cl_pos->me_client_id);
- list_del_init(&cl_pos->link);
- break;
- }
- }
-}
diff --git a/drivers/misc/mei/interface.c b/drivers/misc/mei/interface.c
index 509c395..8de8547 100644
--- a/drivers/misc/mei/interface.c
+++ b/drivers/misc/mei/interface.c
@@ -292,28 +292,23 @@
int mei_send_flow_control(struct mei_device *dev, struct mei_cl *cl)
{
struct mei_msg_hdr *mei_hdr;
- struct hbm_flow_control *mei_flow_control;
+ struct hbm_flow_control *flow_ctrl;
+ const size_t len = sizeof(struct hbm_flow_control);
- mei_hdr = (struct mei_msg_hdr *) &dev->wr_msg_buf[0];
- mei_hdr->host_addr = 0;
- mei_hdr->me_addr = 0;
- mei_hdr->length = sizeof(struct hbm_flow_control);
- mei_hdr->msg_complete = 1;
- mei_hdr->reserved = 0;
+ mei_hdr = mei_hbm_hdr(&dev->wr_msg_buf[0], len);
- mei_flow_control = (struct hbm_flow_control *) &dev->wr_msg_buf[1];
- memset(mei_flow_control, 0, sizeof(*mei_flow_control));
- mei_flow_control->host_addr = cl->host_client_id;
- mei_flow_control->me_addr = cl->me_client_id;
- mei_flow_control->hbm_cmd = MEI_FLOW_CONTROL_CMD;
- memset(mei_flow_control->reserved, 0,
- sizeof(mei_flow_control->reserved));
+ flow_ctrl = (struct hbm_flow_control *)&dev->wr_msg_buf[1];
+ memset(flow_ctrl, 0, len);
+ flow_ctrl->hbm_cmd = MEI_FLOW_CONTROL_CMD;
+ flow_ctrl->host_addr = cl->host_client_id;
+ flow_ctrl->me_addr = cl->me_client_id;
+ /* FIXME: reserved !? */
+ memset(flow_ctrl->reserved, 0, sizeof(flow_ctrl->reserved));
dev_dbg(&dev->pdev->dev, "sending flow control host client = %d, ME client = %d\n",
cl->host_client_id, cl->me_client_id);
return mei_write_message(dev, mei_hdr,
- (unsigned char *) mei_flow_control,
- sizeof(struct hbm_flow_control));
+ (unsigned char *) flow_ctrl, len);
}
/**
@@ -352,26 +347,19 @@
int mei_disconnect(struct mei_device *dev, struct mei_cl *cl)
{
struct mei_msg_hdr *mei_hdr;
- struct hbm_client_disconnect_request *mei_cli_disconnect;
+ struct hbm_client_connect_request *req;
+ const size_t len = sizeof(struct hbm_client_connect_request);
- mei_hdr = (struct mei_msg_hdr *) &dev->wr_msg_buf[0];
- mei_hdr->host_addr = 0;
- mei_hdr->me_addr = 0;
- mei_hdr->length = sizeof(struct hbm_client_disconnect_request);
- mei_hdr->msg_complete = 1;
- mei_hdr->reserved = 0;
+ mei_hdr = mei_hbm_hdr(&dev->wr_msg_buf[0], len);
- mei_cli_disconnect =
- (struct hbm_client_disconnect_request *) &dev->wr_msg_buf[1];
- memset(mei_cli_disconnect, 0, sizeof(*mei_cli_disconnect));
- mei_cli_disconnect->host_addr = cl->host_client_id;
- mei_cli_disconnect->me_addr = cl->me_client_id;
- mei_cli_disconnect->hbm_cmd = CLIENT_DISCONNECT_REQ_CMD;
- mei_cli_disconnect->reserved[0] = 0;
+ req = (struct hbm_client_connect_request *)&dev->wr_msg_buf[1];
+ memset(req, 0, len);
+ req->hbm_cmd = CLIENT_DISCONNECT_REQ_CMD;
+ req->host_addr = cl->host_client_id;
+ req->me_addr = cl->me_client_id;
+ req->reserved = 0;
- return mei_write_message(dev, mei_hdr,
- (unsigned char *) mei_cli_disconnect,
- sizeof(struct hbm_client_disconnect_request));
+ return mei_write_message(dev, mei_hdr, (unsigned char *)req, len);
}
/**
@@ -385,23 +373,16 @@
int mei_connect(struct mei_device *dev, struct mei_cl *cl)
{
struct mei_msg_hdr *mei_hdr;
- struct hbm_client_connect_request *mei_cli_connect;
+ struct hbm_client_connect_request *req;
+ const size_t len = sizeof(struct hbm_client_connect_request);
- mei_hdr = (struct mei_msg_hdr *) &dev->wr_msg_buf[0];
- mei_hdr->host_addr = 0;
- mei_hdr->me_addr = 0;
- mei_hdr->length = sizeof(struct hbm_client_connect_request);
- mei_hdr->msg_complete = 1;
- mei_hdr->reserved = 0;
+ mei_hdr = mei_hbm_hdr(&dev->wr_msg_buf[0], len);
- mei_cli_connect =
- (struct hbm_client_connect_request *) &dev->wr_msg_buf[1];
- mei_cli_connect->host_addr = cl->host_client_id;
- mei_cli_connect->me_addr = cl->me_client_id;
- mei_cli_connect->hbm_cmd = CLIENT_CONNECT_REQ_CMD;
- mei_cli_connect->reserved = 0;
+ req = (struct hbm_client_connect_request *) &dev->wr_msg_buf[1];
+ req->hbm_cmd = CLIENT_CONNECT_REQ_CMD;
+ req->host_addr = cl->host_client_id;
+ req->me_addr = cl->me_client_id;
+ req->reserved = 0;
- return mei_write_message(dev, mei_hdr,
- (unsigned char *) mei_cli_connect,
- sizeof(struct hbm_client_connect_request));
+ return mei_write_message(dev, mei_hdr, (unsigned char *) req, len);
}
diff --git a/drivers/misc/mei/interrupt.c b/drivers/misc/mei/interrupt.c
index 3533edd..04fa213 100644
--- a/drivers/misc/mei/interrupt.c
+++ b/drivers/misc/mei/interrupt.c
@@ -57,14 +57,14 @@
*/
static void _mei_cmpl(struct mei_cl *cl, struct mei_cl_cb *cb_pos)
{
- if (cb_pos->major_file_operations == MEI_WRITE) {
- mei_free_cb_private(cb_pos);
+ if (cb_pos->fop_type == MEI_FOP_WRITE) {
+ mei_io_cb_free(cb_pos);
cb_pos = NULL;
cl->writing_state = MEI_WRITE_COMPLETE;
if (waitqueue_active(&cl->tx_wait))
wake_up_interruptible(&cl->tx_wait);
- } else if (cb_pos->major_file_operations == MEI_READ &&
+ } else if (cb_pos->fop_type == MEI_FOP_READ &&
MEI_READING == cl->reading_state) {
cl->reading_state = MEI_READ_COMPLETE;
if (waitqueue_active(&cl->rx_wait))
@@ -74,94 +74,6 @@
}
/**
- * _mei_cmpl_iamthif - processes completed iamthif operation.
- *
- * @dev: the device structure.
- * @cb_pos: callback block.
- */
-static void _mei_cmpl_iamthif(struct mei_device *dev, struct mei_cl_cb *cb_pos)
-{
- if (dev->iamthif_canceled != 1) {
- dev->iamthif_state = MEI_IAMTHIF_READ_COMPLETE;
- dev->iamthif_stall_timer = 0;
- memcpy(cb_pos->response_buffer.data,
- dev->iamthif_msg_buf,
- dev->iamthif_msg_buf_index);
- list_add_tail(&cb_pos->cb_list,
- &dev->amthi_read_complete_list.mei_cb.cb_list);
- dev_dbg(&dev->pdev->dev, "amthi read completed.\n");
- dev->iamthif_timer = jiffies;
- dev_dbg(&dev->pdev->dev, "dev->iamthif_timer = %ld\n",
- dev->iamthif_timer);
- } else {
- mei_run_next_iamthif_cmd(dev);
- }
-
- dev_dbg(&dev->pdev->dev, "completing amthi call back.\n");
- wake_up_interruptible(&dev->iamthif_cl.wait);
-}
-
-
-/**
- * mei_irq_thread_read_amthi_message - bottom half read routine after ISR to
- * handle the read amthi message data processing.
- *
- * @complete_list: An instance of our list structure
- * @dev: the device structure
- * @mei_hdr: header of amthi message
- *
- * returns 0 on success, <0 on failure.
- */
-static int mei_irq_thread_read_amthi_message(struct mei_io_list *complete_list,
- struct mei_device *dev,
- struct mei_msg_hdr *mei_hdr)
-{
- struct mei_cl *cl;
- struct mei_cl_cb *cb;
- unsigned char *buffer;
-
- BUG_ON(mei_hdr->me_addr != dev->iamthif_cl.me_client_id);
- BUG_ON(dev->iamthif_state != MEI_IAMTHIF_READING);
-
- buffer = dev->iamthif_msg_buf + dev->iamthif_msg_buf_index;
- BUG_ON(dev->iamthif_mtu < dev->iamthif_msg_buf_index + mei_hdr->length);
-
- mei_read_slots(dev, buffer, mei_hdr->length);
-
- dev->iamthif_msg_buf_index += mei_hdr->length;
-
- if (!mei_hdr->msg_complete)
- return 0;
-
- dev_dbg(&dev->pdev->dev,
- "amthi_message_buffer_index =%d\n",
- mei_hdr->length);
-
- dev_dbg(&dev->pdev->dev, "completed amthi read.\n ");
- if (!dev->iamthif_current_cb)
- return -ENODEV;
-
- cb = dev->iamthif_current_cb;
- dev->iamthif_current_cb = NULL;
-
- cl = (struct mei_cl *)cb->file_private;
- if (!cl)
- return -ENODEV;
-
- dev->iamthif_stall_timer = 0;
- cb->information = dev->iamthif_msg_buf_index;
- cb->read_time = jiffies;
- if (dev->iamthif_ioctl && cl == &dev->iamthif_cl) {
- /* found the iamthif cb */
- dev_dbg(&dev->pdev->dev, "complete the amthi read cb.\n ");
- dev_dbg(&dev->pdev->dev, "add the amthi read cb to complete.\n ");
- list_add_tail(&cb->cb_list,
- &complete_list->mei_cb.cb_list);
- }
- return 0;
-}
-
-/**
* _mei_irq_thread_state_ok - checks if mei header matches file private data
*
* @cl: private data of the file object
@@ -188,7 +100,7 @@
*
* returns 0 on success, <0 on failure.
*/
-static int mei_irq_thread_read_client_message(struct mei_io_list *complete_list,
+static int mei_irq_thread_read_client_message(struct mei_cl_cb *complete_list,
struct mei_device *dev,
struct mei_msg_hdr *mei_hdr)
{
@@ -197,36 +109,36 @@
unsigned char *buffer = NULL;
dev_dbg(&dev->pdev->dev, "start client msg\n");
- if (list_empty(&dev->read_list.mei_cb.cb_list))
+ if (list_empty(&dev->read_list.list))
goto quit;
- list_for_each_entry_safe(cb_pos, cb_next,
- &dev->read_list.mei_cb.cb_list, cb_list) {
- cl = (struct mei_cl *)cb_pos->file_private;
+ list_for_each_entry_safe(cb_pos, cb_next, &dev->read_list.list, list) {
+ cl = cb_pos->cl;
if (cl && _mei_irq_thread_state_ok(cl, mei_hdr)) {
cl->reading_state = MEI_READING;
- buffer = cb_pos->response_buffer.data + cb_pos->information;
+ buffer = cb_pos->response_buffer.data + cb_pos->buf_idx;
if (cb_pos->response_buffer.size <
- mei_hdr->length + cb_pos->information) {
+ mei_hdr->length + cb_pos->buf_idx) {
dev_dbg(&dev->pdev->dev, "message overflow.\n");
- list_del(&cb_pos->cb_list);
+ list_del(&cb_pos->list);
return -ENOMEM;
}
if (buffer)
mei_read_slots(dev, buffer, mei_hdr->length);
- cb_pos->information += mei_hdr->length;
+ cb_pos->buf_idx += mei_hdr->length;
if (mei_hdr->msg_complete) {
cl->status = 0;
- list_del(&cb_pos->cb_list);
+ list_del(&cb_pos->list);
dev_dbg(&dev->pdev->dev,
"completed read H cl = %d, ME cl = %d, length = %lu\n",
cl->host_client_id,
cl->me_client_id,
- cb_pos->information);
- list_add_tail(&cb_pos->cb_list,
- &complete_list->mei_cb.cb_list);
+ cb_pos->buf_idx);
+
+ list_add_tail(&cb_pos->list,
+ &complete_list->list);
}
break;
@@ -246,37 +158,6 @@
}
/**
- * _mei_irq_thread_iamthif_read - prepares to read iamthif data.
- *
- * @dev: the device structure.
- * @slots: free slots.
- *
- * returns 0, OK; otherwise, error.
- */
-static int _mei_irq_thread_iamthif_read(struct mei_device *dev, s32 *slots)
-{
-
- if (((*slots) * sizeof(u32)) < (sizeof(struct mei_msg_hdr)
- + sizeof(struct hbm_flow_control))) {
- return -EMSGSIZE;
- }
- *slots -= mei_data2slots(sizeof(struct hbm_flow_control));
- if (mei_send_flow_control(dev, &dev->iamthif_cl)) {
- dev_dbg(&dev->pdev->dev, "iamthif flow control failed\n");
- return -EIO;
- }
-
- dev_dbg(&dev->pdev->dev, "iamthif flow control success\n");
- dev->iamthif_state = MEI_IAMTHIF_READING;
- dev->iamthif_flow_control_pending = false;
- dev->iamthif_msg_buf_index = 0;
- dev->iamthif_msg_buf_size = 0;
- dev->iamthif_stall_timer = IAMTHIF_STALL_TIMER;
- dev->mei_host_buffer_is_empty = mei_hbuf_is_empty(dev);
- return 0;
-}
-
-/**
* _mei_irq_thread_close - processes close related operation.
*
* @dev: the device structure.
@@ -290,26 +171,24 @@
static int _mei_irq_thread_close(struct mei_device *dev, s32 *slots,
struct mei_cl_cb *cb_pos,
struct mei_cl *cl,
- struct mei_io_list *cmpl_list)
+ struct mei_cl_cb *cmpl_list)
{
if ((*slots * sizeof(u32)) < (sizeof(struct mei_msg_hdr) +
- sizeof(struct hbm_client_disconnect_request)))
+ sizeof(struct hbm_client_connect_request)))
return -EBADMSG;
- *slots -= mei_data2slots(sizeof(struct hbm_client_disconnect_request));
+ *slots -= mei_data2slots(sizeof(struct hbm_client_connect_request));
if (mei_disconnect(dev, cl)) {
cl->status = 0;
- cb_pos->information = 0;
- list_move_tail(&cb_pos->cb_list,
- &cmpl_list->mei_cb.cb_list);
+ cb_pos->buf_idx = 0;
+ list_move_tail(&cb_pos->list, &cmpl_list->list);
return -EMSGSIZE;
} else {
cl->state = MEI_FILE_DISCONNECTING;
cl->status = 0;
- cb_pos->information = 0;
- list_move_tail(&cb_pos->cb_list,
- &dev->ctrl_rd_list.mei_cb.cb_list);
+ cb_pos->buf_idx = 0;
+ list_move_tail(&cb_pos->list, &dev->ctrl_rd_list.list);
cl->timer_count = MEI_CONNECT_TIMEOUT;
}
@@ -356,7 +235,7 @@
{
struct mei_cl *cl;
- struct mei_cl_cb *cb_pos = NULL, *cb_next = NULL;
+ struct mei_cl_cb *pos = NULL, *next = NULL;
dev_dbg(&dev->pdev->dev,
"connect_response:\n"
@@ -373,8 +252,6 @@
dev_dbg(&dev->pdev->dev, "successfully connected to WD client.\n");
mei_watchdog_register(dev);
- /* next step in the state maching */
- mei_host_init_iamthif(dev);
return;
}
@@ -382,17 +259,16 @@
dev->iamthif_state = MEI_IAMTHIF_IDLE;
return;
}
- list_for_each_entry_safe(cb_pos, cb_next,
- &dev->ctrl_rd_list.mei_cb.cb_list, cb_list) {
+ list_for_each_entry_safe(pos, next, &dev->ctrl_rd_list.list, list) {
- cl = (struct mei_cl *)cb_pos->file_private;
+ cl = pos->cl;
if (!cl) {
- list_del(&cb_pos->cb_list);
+ list_del(&pos->list);
return;
}
- if (MEI_IOCTL == cb_pos->major_file_operations) {
+ if (pos->fop_type == MEI_FOP_IOCTL) {
if (is_treat_specially_client(cl, rs)) {
- list_del(&cb_pos->cb_list);
+ list_del(&pos->list);
cl->status = 0;
cl->timer_count = 0;
break;
@@ -411,7 +287,7 @@
struct hbm_client_connect_response *rs)
{
struct mei_cl *cl;
- struct mei_cl_cb *cb_pos = NULL, *cb_next = NULL;
+ struct mei_cl_cb *pos = NULL, *next = NULL;
dev_dbg(&dev->pdev->dev,
"disconnect_response:\n"
@@ -422,12 +298,11 @@
rs->host_addr,
rs->status);
- list_for_each_entry_safe(cb_pos, cb_next,
- &dev->ctrl_rd_list.mei_cb.cb_list, cb_list) {
- cl = (struct mei_cl *)cb_pos->file_private;
+ list_for_each_entry_safe(pos, next, &dev->ctrl_rd_list.list, list) {
+ cl = pos->cl;
if (!cl) {
- list_del(&cb_pos->cb_list);
+ list_del(&pos->list);
return;
}
@@ -435,7 +310,7 @@
if (cl->host_client_id == rs->host_addr &&
cl->me_client_id == rs->me_addr) {
- list_del(&cb_pos->cb_list);
+ list_del(&pos->list);
if (!rs->status)
cl->state = MEI_FILE_DISCONNECTED;
@@ -537,10 +412,10 @@
* returns !=0, same; 0,not.
*/
static int same_disconn_addr(struct mei_cl *cl,
- struct hbm_client_disconnect_request *disconn)
+ struct hbm_client_connect_request *req)
{
- return (cl->host_client_id == disconn->host_addr &&
- cl->me_client_id == disconn->me_addr);
+ return (cl->host_client_id == req->host_addr &&
+ cl->me_client_id == req->me_addr);
}
/**
@@ -550,49 +425,38 @@
* @disconnect_req: disconnect request bus message.
*/
static void mei_client_disconnect_request(struct mei_device *dev,
- struct hbm_client_disconnect_request *disconnect_req)
+ struct hbm_client_connect_request *disconnect_req)
{
- struct mei_msg_hdr *mei_hdr;
struct hbm_client_connect_response *disconnect_res;
- struct mei_cl *cl_pos = NULL;
- struct mei_cl *cl_next = NULL;
+ struct mei_cl *pos, *next;
+ const size_t len = sizeof(struct hbm_client_connect_response);
- list_for_each_entry_safe(cl_pos, cl_next, &dev->file_list, link) {
- if (same_disconn_addr(cl_pos, disconnect_req)) {
+ list_for_each_entry_safe(pos, next, &dev->file_list, link) {
+ if (same_disconn_addr(pos, disconnect_req)) {
dev_dbg(&dev->pdev->dev, "disconnect request host client %d ME client %d.\n",
disconnect_req->host_addr,
disconnect_req->me_addr);
- cl_pos->state = MEI_FILE_DISCONNECTED;
- cl_pos->timer_count = 0;
- if (cl_pos == &dev->wd_cl)
+ pos->state = MEI_FILE_DISCONNECTED;
+ pos->timer_count = 0;
+ if (pos == &dev->wd_cl)
dev->wd_pending = false;
- else if (cl_pos == &dev->iamthif_cl)
+ else if (pos == &dev->iamthif_cl)
dev->iamthif_timer = 0;
/* prepare disconnect response */
- mei_hdr =
- (struct mei_msg_hdr *) &dev->ext_msg_buf[0];
- mei_hdr->host_addr = 0;
- mei_hdr->me_addr = 0;
- mei_hdr->length =
- sizeof(struct hbm_client_connect_response);
- mei_hdr->msg_complete = 1;
- mei_hdr->reserved = 0;
-
+ (void)mei_hbm_hdr((u32 *)&dev->wr_ext_msg.hdr, len);
disconnect_res =
(struct hbm_client_connect_response *)
- &dev->ext_msg_buf[1];
- disconnect_res->host_addr = cl_pos->host_client_id;
- disconnect_res->me_addr = cl_pos->me_client_id;
+ &dev->wr_ext_msg.data;
disconnect_res->hbm_cmd = CLIENT_DISCONNECT_RES_CMD;
+ disconnect_res->host_addr = pos->host_client_id;
+ disconnect_res->me_addr = pos->me_client_id;
disconnect_res->status = 0;
- dev->extra_write_index = 2;
break;
}
}
}
-
/**
* mei_irq_thread_read_bus_message - bottom half read routine after ISR to
* handle the read bus message cmd processing.
@@ -604,16 +468,15 @@
struct mei_msg_hdr *mei_hdr)
{
struct mei_bus_message *mei_msg;
+ struct mei_me_client *me_client;
struct hbm_host_version_response *version_res;
struct hbm_client_connect_response *connect_res;
struct hbm_client_connect_response *disconnect_res;
+ struct hbm_client_connect_request *disconnect_req;
struct hbm_flow_control *flow_control;
struct hbm_props_response *props_res;
struct hbm_host_enum_response *enum_res;
- struct hbm_client_disconnect_request *disconnect_req;
- struct hbm_host_stop_request *host_stop_req;
- int res;
-
+ struct hbm_host_stop_request *stop_req;
/* read the message to our buffer */
BUG_ON(mei_hdr->length >= sizeof(dev->rd_msg_buf));
@@ -637,26 +500,20 @@
return;
}
} else {
+ u32 *buf = dev->wr_msg_buf;
+ const size_t len = sizeof(struct hbm_host_stop_request);
+
dev->version = version_res->me_max_version;
+
/* send stop message */
- mei_hdr = (struct mei_msg_hdr *)&dev->wr_msg_buf[0];
- mei_hdr->host_addr = 0;
- mei_hdr->me_addr = 0;
- mei_hdr->length = sizeof(struct hbm_host_stop_request);
- mei_hdr->msg_complete = 1;
- mei_hdr->reserved = 0;
+ mei_hdr = mei_hbm_hdr(&buf[0], len);
+ stop_req = (struct hbm_host_stop_request *)&buf[1];
+ memset(stop_req, 0, len);
+ stop_req->hbm_cmd = HOST_STOP_REQ_CMD;
+ stop_req->reason = DRIVER_STOP_REQUEST;
- host_stop_req = (struct hbm_host_stop_request *)
- &dev->wr_msg_buf[1];
-
- memset(host_stop_req,
- 0,
- sizeof(struct hbm_host_stop_request));
- host_stop_req->hbm_cmd = HOST_STOP_REQ_CMD;
- host_stop_req->reason = DRIVER_STOP_REQUEST;
mei_write_message(dev, mei_hdr,
- (unsigned char *) (host_stop_req),
- mei_hdr->length);
+ (unsigned char *)stop_req, len);
dev_dbg(&dev->pdev->dev, "version mismatch.\n");
return;
}
@@ -666,16 +523,14 @@
break;
case CLIENT_CONNECT_RES_CMD:
- connect_res =
- (struct hbm_client_connect_response *) mei_msg;
+ connect_res = (struct hbm_client_connect_response *) mei_msg;
mei_client_connect_response(dev, connect_res);
dev_dbg(&dev->pdev->dev, "client connect response message received.\n");
wake_up(&dev->wait_recvd_msg);
break;
case CLIENT_DISCONNECT_RES_CMD:
- disconnect_res =
- (struct hbm_client_connect_response *) mei_msg;
+ disconnect_res = (struct hbm_client_connect_response *) mei_msg;
mei_client_disconnect_response(dev, disconnect_res);
dev_dbg(&dev->pdev->dev, "client disconnect response message received.\n");
wake_up(&dev->wait_recvd_msg);
@@ -689,64 +544,37 @@
case HOST_CLIENT_PROPERTIES_RES_CMD:
props_res = (struct hbm_props_response *)mei_msg;
+ me_client = &dev->me_clients[dev->me_client_presentation_num];
+
if (props_res->status || !dev->me_clients) {
dev_dbg(&dev->pdev->dev, "reset due to received host client properties response bus message wrong status.\n");
mei_reset(dev, 1);
return;
}
- if (dev->me_clients[dev->me_client_presentation_num]
- .client_id == props_res->address) {
- dev->me_clients[dev->me_client_presentation_num].props
- = props_res->client_properties;
-
- if (dev->dev_state == MEI_DEV_INIT_CLIENTS &&
- dev->init_clients_state ==
- MEI_CLIENT_PROPERTIES_MESSAGE) {
- dev->me_client_index++;
- dev->me_client_presentation_num++;
-
- /** Send Client Properties request **/
- res = mei_host_client_properties(dev);
- if (res < 0) {
- dev_dbg(&dev->pdev->dev, "mei_host_client_properties() failed");
- return;
- } else if (!res) {
- /*
- * No more clients to send to.
- * Clear Map for indicating now ME clients
- * with associated host client
- */
- bitmap_zero(dev->host_clients_map, MEI_CLIENTS_MAX);
- dev->open_handle_count = 0;
-
- /*
- * Reserving the first three client IDs
- * Client Id 0 - Reserved for MEI Bus Message communications
- * Client Id 1 - Reserved for Watchdog
- * Client ID 2 - Reserved for AMTHI
- */
- bitmap_set(dev->host_clients_map, 0, 3);
- dev->dev_state = MEI_DEV_ENABLED;
-
- /* if wd initialization fails, initialization the AMTHI client,
- * otherwise the AMTHI client will be initialized after the WD client connect response
- * will be received
- */
- if (mei_wd_host_init(dev))
- mei_host_init_iamthif(dev);
- }
-
- } else {
- dev_dbg(&dev->pdev->dev, "reset due to received host client properties response bus message");
- mei_reset(dev, 1);
- return;
- }
- } else {
- dev_dbg(&dev->pdev->dev, "reset due to received host client properties response bus message for wrong client ID\n");
+ if (me_client->client_id != props_res->address) {
+ dev_err(&dev->pdev->dev,
+ "Host client properties reply mismatch\n");
mei_reset(dev, 1);
+
return;
}
+
+ if (dev->dev_state != MEI_DEV_INIT_CLIENTS ||
+ dev->init_clients_state != MEI_CLIENT_PROPERTIES_MESSAGE) {
+ dev_err(&dev->pdev->dev,
+ "Unexpected client properties reply\n");
+ mei_reset(dev, 1);
+
+ return;
+ }
+
+ me_client->props = props_res->client_properties;
+ dev->me_client_index++;
+ dev->me_client_presentation_num++;
+
+ mei_host_client_enumerate(dev);
+
break;
case HOST_ENUM_RES_CMD:
@@ -760,7 +588,8 @@
mei_allocate_me_clients_storage(dev);
dev->init_clients_state =
MEI_CLIENT_PROPERTIES_MESSAGE;
- mei_host_client_properties(dev);
+
+ mei_host_client_enumerate(dev);
} else {
dev_dbg(&dev->pdev->dev, "reset due to received host enumeration clients response bus message.\n");
mei_reset(dev, 1);
@@ -776,29 +605,23 @@
case CLIENT_DISCONNECT_REQ_CMD:
/* search for client */
- disconnect_req =
- (struct hbm_client_disconnect_request *) mei_msg;
+ disconnect_req = (struct hbm_client_connect_request *)mei_msg;
mei_client_disconnect_request(dev, disconnect_req);
break;
case ME_STOP_REQ_CMD:
- /* prepare stop request */
- mei_hdr = (struct mei_msg_hdr *) &dev->ext_msg_buf[0];
- mei_hdr->host_addr = 0;
- mei_hdr->me_addr = 0;
- mei_hdr->length = sizeof(struct hbm_host_stop_request);
- mei_hdr->msg_complete = 1;
- mei_hdr->reserved = 0;
- host_stop_req =
- (struct hbm_host_stop_request *) &dev->ext_msg_buf[1];
- memset(host_stop_req, 0, sizeof(struct hbm_host_stop_request));
- host_stop_req->hbm_cmd = HOST_STOP_REQ_CMD;
- host_stop_req->reason = DRIVER_STOP_REQUEST;
- host_stop_req->reserved[0] = 0;
- host_stop_req->reserved[1] = 0;
- dev->extra_write_index = 2;
- break;
+ {
+ /* prepare stop request: sent in next interrupt event */
+ const size_t len = sizeof(struct hbm_host_stop_request);
+
+ mei_hdr = mei_hbm_hdr((u32 *)&dev->wr_ext_msg.hdr, len);
+ stop_req = (struct hbm_host_stop_request *)&dev->wr_ext_msg.data;
+ memset(stop_req, 0, len);
+ stop_req->hbm_cmd = HOST_STOP_REQ_CMD;
+ stop_req->reason = DRIVER_STOP_REQUEST;
+ break;
+ }
default:
BUG();
break;
@@ -821,12 +644,12 @@
static int _mei_irq_thread_read(struct mei_device *dev, s32 *slots,
struct mei_cl_cb *cb_pos,
struct mei_cl *cl,
- struct mei_io_list *cmpl_list)
+ struct mei_cl_cb *cmpl_list)
{
if ((*slots * sizeof(u32)) < (sizeof(struct mei_msg_hdr) +
sizeof(struct hbm_flow_control))) {
/* return the cancel routine */
- list_del(&cb_pos->cb_list);
+ list_del(&cb_pos->list);
return -EBADMSG;
}
@@ -834,11 +657,11 @@
if (mei_send_flow_control(dev, cl)) {
cl->status = -ENODEV;
- cb_pos->information = 0;
- list_move_tail(&cb_pos->cb_list, &cmpl_list->mei_cb.cb_list);
+ cb_pos->buf_idx = 0;
+ list_move_tail(&cb_pos->list, &cmpl_list->list);
return -ENODEV;
}
- list_move_tail(&cb_pos->cb_list, &dev->read_list.mei_cb.cb_list);
+ list_move_tail(&cb_pos->list, &dev->read_list.list);
return 0;
}
@@ -858,12 +681,12 @@
static int _mei_irq_thread_ioctl(struct mei_device *dev, s32 *slots,
struct mei_cl_cb *cb_pos,
struct mei_cl *cl,
- struct mei_io_list *cmpl_list)
+ struct mei_cl_cb *cmpl_list)
{
if ((*slots * sizeof(u32)) < (sizeof(struct mei_msg_hdr) +
sizeof(struct hbm_client_connect_request))) {
/* return the cancel routine */
- list_del(&cb_pos->cb_list);
+ list_del(&cb_pos->list);
return -EBADMSG;
}
@@ -871,189 +694,74 @@
*slots -= mei_data2slots(sizeof(struct hbm_client_connect_request));
if (mei_connect(dev, cl)) {
cl->status = -ENODEV;
- cb_pos->information = 0;
- list_del(&cb_pos->cb_list);
+ cb_pos->buf_idx = 0;
+ list_del(&cb_pos->list);
return -ENODEV;
} else {
- list_move_tail(&cb_pos->cb_list,
- &dev->ctrl_rd_list.mei_cb.cb_list);
+ list_move_tail(&cb_pos->list, &dev->ctrl_rd_list.list);
cl->timer_count = MEI_CONNECT_TIMEOUT;
}
return 0;
}
/**
- * _mei_irq_thread_cmpl - processes completed and no-iamthif operation.
+ * mei_irq_thread_write_complete - write messages to device.
*
* @dev: the device structure.
* @slots: free slots.
- * @cb_pos: callback block.
- * @cl: private data of the file object.
+ * @cb: callback block.
* @cmpl_list: complete list.
*
* returns 0, OK; otherwise, error.
*/
-static int _mei_irq_thread_cmpl(struct mei_device *dev, s32 *slots,
- struct mei_cl_cb *cb_pos,
- struct mei_cl *cl,
- struct mei_io_list *cmpl_list)
+static int mei_irq_thread_write_complete(struct mei_device *dev, s32 *slots,
+ struct mei_cl_cb *cb, struct mei_cl_cb *cmpl_list)
{
struct mei_msg_hdr *mei_hdr;
+ struct mei_cl *cl = cb->cl;
+ size_t len = cb->request_buffer.size - cb->buf_idx;
+ size_t msg_slots = mei_data2slots(len);
- if ((*slots * sizeof(u32)) >= (sizeof(struct mei_msg_hdr) +
- (cb_pos->request_buffer.size -
- cb_pos->information))) {
- mei_hdr = (struct mei_msg_hdr *) &dev->wr_msg_buf[0];
- mei_hdr->host_addr = cl->host_client_id;
- mei_hdr->me_addr = cl->me_client_id;
- mei_hdr->length = cb_pos->request_buffer.size -
- cb_pos->information;
+ mei_hdr = (struct mei_msg_hdr *)&dev->wr_msg_buf[0];
+ mei_hdr->host_addr = cl->host_client_id;
+ mei_hdr->me_addr = cl->me_client_id;
+ mei_hdr->reserved = 0;
+
+ if (*slots >= msg_slots) {
+ mei_hdr->length = len;
mei_hdr->msg_complete = 1;
- mei_hdr->reserved = 0;
- dev_dbg(&dev->pdev->dev, "cb_pos->request_buffer.size =%d"
- "mei_hdr->msg_complete = %d\n",
- cb_pos->request_buffer.size,
- mei_hdr->msg_complete);
- dev_dbg(&dev->pdev->dev, "cb_pos->information =%lu\n",
- cb_pos->information);
- dev_dbg(&dev->pdev->dev, "mei_hdr->length =%d\n",
- mei_hdr->length);
- *slots -= mei_data2slots(mei_hdr->length);
- if (mei_write_message(dev, mei_hdr,
- (unsigned char *)
- (cb_pos->request_buffer.data +
- cb_pos->information),
- mei_hdr->length)) {
- cl->status = -ENODEV;
- list_move_tail(&cb_pos->cb_list,
- &cmpl_list->mei_cb.cb_list);
- return -ENODEV;
- } else {
- if (mei_flow_ctrl_reduce(dev, cl))
- return -ENODEV;
- cl->status = 0;
- cb_pos->information += mei_hdr->length;
- list_move_tail(&cb_pos->cb_list,
- &dev->write_waiting_list.mei_cb.cb_list);
- }
+ /* Split the message only if we can write the whole host buffer */
} else if (*slots == dev->hbuf_depth) {
- /* buffer is still empty */
- mei_hdr = (struct mei_msg_hdr *) &dev->wr_msg_buf[0];
- mei_hdr->host_addr = cl->host_client_id;
- mei_hdr->me_addr = cl->me_client_id;
- mei_hdr->length =
- (*slots * sizeof(u32)) - sizeof(struct mei_msg_hdr);
+ msg_slots = *slots;
+ len = (*slots * sizeof(u32)) - sizeof(struct mei_msg_hdr);
+ mei_hdr->length = len;
mei_hdr->msg_complete = 0;
- mei_hdr->reserved = 0;
- *slots -= mei_data2slots(mei_hdr->length);
- if (mei_write_message(dev, mei_hdr,
- (unsigned char *)
- (cb_pos->request_buffer.data +
- cb_pos->information),
- mei_hdr->length)) {
- cl->status = -ENODEV;
- list_move_tail(&cb_pos->cb_list,
- &cmpl_list->mei_cb.cb_list);
- return -ENODEV;
- } else {
- cb_pos->information += mei_hdr->length;
- dev_dbg(&dev->pdev->dev,
- "cb_pos->request_buffer.size =%d"
- " mei_hdr->msg_complete = %d\n",
- cb_pos->request_buffer.size,
- mei_hdr->msg_complete);
- dev_dbg(&dev->pdev->dev, "cb_pos->information =%lu\n",
- cb_pos->information);
- dev_dbg(&dev->pdev->dev, "mei_hdr->length =%d\n",
- mei_hdr->length);
- }
- return -EMSGSIZE;
} else {
- return -EBADMSG;
+ /* wait for next time the host buffer is empty */
+ return 0;
}
- return 0;
-}
+ dev_dbg(&dev->pdev->dev, "buf: size = %d idx = %lu\n",
+ cb->request_buffer.size, cb->buf_idx);
+ dev_dbg(&dev->pdev->dev, "msg: len = %d complete = %d\n",
+ mei_hdr->length, mei_hdr->msg_complete);
-/**
- * _mei_irq_thread_cmpl_iamthif - processes completed iamthif operation.
- *
- * @dev: the device structure.
- * @slots: free slots.
- * @cb_pos: callback block.
- * @cl: private data of the file object.
- * @cmpl_list: complete list.
- *
- * returns 0, OK; otherwise, error.
- */
-static int _mei_irq_thread_cmpl_iamthif(struct mei_device *dev, s32 *slots,
- struct mei_cl_cb *cb_pos,
- struct mei_cl *cl,
- struct mei_io_list *cmpl_list)
-{
- struct mei_msg_hdr *mei_hdr;
-
- if ((*slots * sizeof(u32)) >= (sizeof(struct mei_msg_hdr) +
- dev->iamthif_msg_buf_size -
- dev->iamthif_msg_buf_index)) {
- mei_hdr = (struct mei_msg_hdr *) &dev->wr_msg_buf[0];
- mei_hdr->host_addr = cl->host_client_id;
- mei_hdr->me_addr = cl->me_client_id;
- mei_hdr->length = dev->iamthif_msg_buf_size -
- dev->iamthif_msg_buf_index;
- mei_hdr->msg_complete = 1;
- mei_hdr->reserved = 0;
-
- *slots -= mei_data2slots(mei_hdr->length);
-
- if (mei_write_message(dev, mei_hdr,
- (dev->iamthif_msg_buf +
- dev->iamthif_msg_buf_index),
- mei_hdr->length)) {
- dev->iamthif_state = MEI_IAMTHIF_IDLE;
- cl->status = -ENODEV;
- list_del(&cb_pos->cb_list);
- return -ENODEV;
- } else {
- if (mei_flow_ctrl_reduce(dev, cl))
- return -ENODEV;
- dev->iamthif_msg_buf_index += mei_hdr->length;
- cb_pos->information = dev->iamthif_msg_buf_index;
- cl->status = 0;
- dev->iamthif_state = MEI_IAMTHIF_FLOW_CONTROL;
- dev->iamthif_flow_control_pending = true;
- /* save iamthif cb sent to amthi client */
- dev->iamthif_current_cb = cb_pos;
- list_move_tail(&cb_pos->cb_list,
- &dev->write_waiting_list.mei_cb.cb_list);
-
- }
- } else if (*slots == dev->hbuf_depth) {
- /* buffer is still empty */
- mei_hdr = (struct mei_msg_hdr *) &dev->wr_msg_buf[0];
- mei_hdr->host_addr = cl->host_client_id;
- mei_hdr->me_addr = cl->me_client_id;
- mei_hdr->length =
- (*slots * sizeof(u32)) - sizeof(struct mei_msg_hdr);
- mei_hdr->msg_complete = 0;
- mei_hdr->reserved = 0;
-
- *slots -= mei_data2slots(mei_hdr->length);
-
- if (mei_write_message(dev, mei_hdr,
- (dev->iamthif_msg_buf +
- dev->iamthif_msg_buf_index),
- mei_hdr->length)) {
- cl->status = -ENODEV;
- list_del(&cb_pos->cb_list);
- } else {
- dev->iamthif_msg_buf_index += mei_hdr->length;
- }
- return -EMSGSIZE;
- } else {
- return -EBADMSG;
+ *slots -= msg_slots;
+ if (mei_write_message(dev, mei_hdr,
+ cb->request_buffer.data + cb->buf_idx, len)) {
+ cl->status = -ENODEV;
+ list_move_tail(&cb->list, &cmpl_list->list);
+ return -ENODEV;
}
+ if (mei_flow_ctrl_reduce(dev, cl))
+ return -ENODEV;
+
+ cl->status = 0;
+ cb->buf_idx += mei_hdr->length;
+ if (mei_hdr->msg_complete)
+ list_move_tail(&cb->list, &dev->write_waiting_list.list);
+
return 0;
}
@@ -1067,7 +775,7 @@
*
* returns 0 on success, <0 on failure.
*/
-static int mei_irq_thread_read_handler(struct mei_io_list *cmpl_list,
+static int mei_irq_thread_read_handler(struct mei_cl_cb *cmpl_list,
struct mei_device *dev,
s32 *slots)
{
@@ -1130,8 +838,8 @@
dev_dbg(&dev->pdev->dev, "call mei_irq_thread_read_iamthif_message.\n");
dev_dbg(&dev->pdev->dev, "mei_hdr->length =%d\n",
mei_hdr->length);
- ret = mei_irq_thread_read_amthi_message(cmpl_list,
- dev, mei_hdr);
+
+ ret = mei_amthif_irq_read_message(cmpl_list, dev, mei_hdr);
if (ret)
goto end;
@@ -1164,53 +872,51 @@
* mei_irq_thread_write_handler - bottom half write routine after
* ISR to handle the write processing.
*
- * @cmpl_list: An instance of our list structure
* @dev: the device structure
- * @slots: slots to write.
+ * @cmpl_list: An instance of our list structure
*
* returns 0 on success, <0 on failure.
*/
-static int mei_irq_thread_write_handler(struct mei_io_list *cmpl_list,
- struct mei_device *dev,
- s32 *slots)
+static int mei_irq_thread_write_handler(struct mei_device *dev,
+ struct mei_cl_cb *cmpl_list)
{
struct mei_cl *cl;
struct mei_cl_cb *pos = NULL, *next = NULL;
- struct mei_io_list *list;
+ struct mei_cl_cb *list;
+ s32 slots;
int ret;
if (!mei_hbuf_is_empty(dev)) {
dev_dbg(&dev->pdev->dev, "host buffer is not empty.\n");
return 0;
}
- *slots = mei_hbuf_empty_slots(dev);
- if (*slots <= 0)
+ slots = mei_hbuf_empty_slots(dev);
+ if (slots <= 0)
return -EMSGSIZE;
/* complete all waiting for write CB */
dev_dbg(&dev->pdev->dev, "complete all waiting for write cb.\n");
list = &dev->write_waiting_list;
- list_for_each_entry_safe(pos, next, &list->mei_cb.cb_list, cb_list) {
- cl = (struct mei_cl *)pos->file_private;
+ list_for_each_entry_safe(pos, next, &list->list, list) {
+ cl = pos->cl;
if (cl == NULL)
continue;
cl->status = 0;
- list_del(&pos->cb_list);
+ list_del(&pos->list);
if (MEI_WRITING == cl->writing_state &&
- (pos->major_file_operations == MEI_WRITE) &&
- (cl != &dev->iamthif_cl)) {
+ pos->fop_type == MEI_FOP_WRITE &&
+ cl != &dev->iamthif_cl) {
dev_dbg(&dev->pdev->dev, "MEI WRITE COMPLETE\n");
cl->writing_state = MEI_WRITE_COMPLETE;
- list_add_tail(&pos->cb_list,
- &cmpl_list->mei_cb.cb_list);
+ list_add_tail(&pos->list, &cmpl_list->list);
}
if (cl == &dev->iamthif_cl) {
dev_dbg(&dev->pdev->dev, "check iamthif flow control.\n");
if (dev->iamthif_flow_control_pending) {
- ret = _mei_irq_thread_iamthif_read(dev, slots);
+ ret = mei_amthif_irq_read(dev, &slots);
if (ret)
return ret;
}
@@ -1222,15 +928,11 @@
wake_up_interruptible(&dev->wait_stop_wd);
}
- if (dev->extra_write_index) {
- dev_dbg(&dev->pdev->dev, "extra_write_index =%d.\n",
- dev->extra_write_index);
- mei_write_message(dev,
- (struct mei_msg_hdr *) &dev->ext_msg_buf[0],
- (unsigned char *) &dev->ext_msg_buf[1],
- (dev->extra_write_index - 1) * sizeof(u32));
- *slots -= dev->extra_write_index;
- dev->extra_write_index = 0;
+ if (dev->wr_ext_msg.hdr.length) {
+ mei_write_message(dev, &dev->wr_ext_msg.hdr,
+ dev->wr_ext_msg.data, dev->wr_ext_msg.hdr.length);
+ slots -= mei_data2slots(dev->wr_ext_msg.hdr.length);
+ dev->wr_ext_msg.hdr.length = 0;
}
if (dev->dev_state == MEI_DEV_ENABLED) {
if (dev->wd_pending &&
@@ -1243,41 +945,43 @@
dev->wd_pending = false;
if (dev->wd_state == MEI_WD_RUNNING)
- *slots -= mei_data2slots(MEI_WD_START_MSG_SIZE);
+ slots -= mei_data2slots(MEI_WD_START_MSG_SIZE);
else
- *slots -= mei_data2slots(MEI_WD_STOP_MSG_SIZE);
+ slots -= mei_data2slots(MEI_WD_STOP_MSG_SIZE);
}
}
/* complete control write list CB */
dev_dbg(&dev->pdev->dev, "complete control write list cb.\n");
- list_for_each_entry_safe(pos, next,
- &dev->ctrl_wr_list.mei_cb.cb_list, cb_list) {
- cl = (struct mei_cl *) pos->file_private;
+ list_for_each_entry_safe(pos, next, &dev->ctrl_wr_list.list, list) {
+ cl = pos->cl;
if (!cl) {
- list_del(&pos->cb_list);
+ list_del(&pos->list);
return -ENODEV;
}
- switch (pos->major_file_operations) {
- case MEI_CLOSE:
+ switch (pos->fop_type) {
+ case MEI_FOP_CLOSE:
/* send disconnect message */
- ret = _mei_irq_thread_close(dev, slots, pos, cl, cmpl_list);
+ ret = _mei_irq_thread_close(dev, &slots, pos,
+ cl, cmpl_list);
if (ret)
return ret;
break;
- case MEI_READ:
+ case MEI_FOP_READ:
/* send flow control message */
- ret = _mei_irq_thread_read(dev, slots, pos, cl, cmpl_list);
+ ret = _mei_irq_thread_read(dev, &slots, pos,
+ cl, cmpl_list);
if (ret)
return ret;
break;
- case MEI_IOCTL:
+ case MEI_FOP_IOCTL:
/* connect message */
if (mei_other_client_is_connecting(dev, cl))
continue;
- ret = _mei_irq_thread_ioctl(dev, slots, pos, cl, cmpl_list);
+ ret = _mei_irq_thread_ioctl(dev, &slots, pos,
+ cl, cmpl_list);
if (ret)
return ret;
@@ -1290,40 +994,26 @@
}
/* complete write list CB */
dev_dbg(&dev->pdev->dev, "complete write list cb.\n");
- list_for_each_entry_safe(pos, next,
- &dev->write_list.mei_cb.cb_list, cb_list) {
- cl = (struct mei_cl *)pos->file_private;
+ list_for_each_entry_safe(pos, next, &dev->write_list.list, list) {
+ cl = pos->cl;
if (cl == NULL)
continue;
-
- if (cl != &dev->iamthif_cl) {
- if (mei_flow_ctrl_creds(dev, cl) <= 0) {
- dev_dbg(&dev->pdev->dev,
- "No flow control credentials for client %d, not sending.\n",
- cl->host_client_id);
- continue;
- }
- ret = _mei_irq_thread_cmpl(dev, slots, pos,
- cl, cmpl_list);
- if (ret)
- return ret;
-
- } else if (cl == &dev->iamthif_cl) {
- /* IAMTHIF IOCTL */
- dev_dbg(&dev->pdev->dev, "complete amthi write cb.\n");
- if (mei_flow_ctrl_creds(dev, cl) <= 0) {
- dev_dbg(&dev->pdev->dev,
- "No flow control credentials for amthi client %d.\n",
- cl->host_client_id);
- continue;
- }
- ret = _mei_irq_thread_cmpl_iamthif(dev, slots, pos,
- cl, cmpl_list);
- if (ret)
- return ret;
-
+ if (mei_flow_ctrl_creds(dev, cl) <= 0) {
+ dev_dbg(&dev->pdev->dev,
+ "No flow control credentials for client %d, not sending.\n",
+ cl->host_client_id);
+ continue;
}
+ if (cl == &dev->iamthif_cl)
+ ret = mei_amthif_irq_write_complete(dev, &slots,
+ pos, cmpl_list);
+ else
+ ret = mei_irq_thread_write_complete(dev, &slots, pos,
+ cmpl_list);
+ if (ret)
+ return ret;
+
}
return 0;
}
@@ -1342,7 +1032,6 @@
unsigned long timeout;
struct mei_cl *cl_pos = NULL;
struct mei_cl *cl_next = NULL;
- struct list_head *amthi_complete_list = NULL;
struct mei_cl_cb *cb_pos = NULL;
struct mei_cl_cb *cb_next = NULL;
@@ -1385,19 +1074,18 @@
dev->iamthif_state = MEI_IAMTHIF_IDLE;
dev->iamthif_timer = 0;
- if (dev->iamthif_current_cb)
- mei_free_cb_private(dev->iamthif_current_cb);
+ mei_io_cb_free(dev->iamthif_current_cb);
+ dev->iamthif_current_cb = NULL;
dev->iamthif_file_object = NULL;
- dev->iamthif_current_cb = NULL;
- mei_run_next_iamthif_cmd(dev);
+ mei_amthif_run_next_cmd(dev);
}
}
if (dev->iamthif_timer) {
timeout = dev->iamthif_timer +
- msecs_to_jiffies(IAMTHIF_READ_TIMER);
+ mei_secs_to_jiffies(MEI_IAMTHIF_READ_TIMER);
dev_dbg(&dev->pdev->dev, "dev->iamthif_timer = %ld\n",
dev->iamthif_timer);
@@ -1411,25 +1099,22 @@
dev_dbg(&dev->pdev->dev, "freeing AMTHI for other requests\n");
- amthi_complete_list = &dev->amthi_read_complete_list.
- mei_cb.cb_list;
-
- list_for_each_entry_safe(cb_pos, cb_next, amthi_complete_list, cb_list) {
+ list_for_each_entry_safe(cb_pos, cb_next,
+ &dev->amthif_rd_complete_list.list, list) {
cl_pos = cb_pos->file_object->private_data;
/* Finding the AMTHI entry. */
if (cl_pos == &dev->iamthif_cl)
- list_del(&cb_pos->cb_list);
+ list_del(&cb_pos->list);
}
- if (dev->iamthif_current_cb)
- mei_free_cb_private(dev->iamthif_current_cb);
+ mei_io_cb_free(dev->iamthif_current_cb);
+ dev->iamthif_current_cb = NULL;
dev->iamthif_file_object->private_data = NULL;
dev->iamthif_file_object = NULL;
- dev->iamthif_current_cb = NULL;
dev->iamthif_timer = 0;
- mei_run_next_iamthif_cmd(dev);
+ mei_amthif_run_next_cmd(dev);
}
}
@@ -1451,7 +1136,7 @@
irqreturn_t mei_interrupt_thread_handler(int irq, void *dev_id)
{
struct mei_device *dev = (struct mei_device *) dev_id;
- struct mei_io_list complete_list;
+ struct mei_cl_cb complete_list;
struct mei_cl_cb *cb_pos = NULL, *cb_next = NULL;
struct mei_cl *cl;
s32 slots;
@@ -1504,17 +1189,17 @@
}
/* check slots available for reading */
slots = mei_count_full_read_slots(dev);
- dev_dbg(&dev->pdev->dev, "slots =%08x extra_write_index =%08x.\n",
- slots, dev->extra_write_index);
- while (slots > 0 && !dev->extra_write_index) {
- dev_dbg(&dev->pdev->dev, "slots =%08x extra_write_index =%08x.\n",
- slots, dev->extra_write_index);
+ while (slots > 0) {
+ /* we have urgent data to send so break the read */
+ if (dev->wr_ext_msg.hdr.length)
+ break;
+ dev_dbg(&dev->pdev->dev, "slots =%08x\n", slots);
dev_dbg(&dev->pdev->dev, "call mei_irq_thread_read_handler.\n");
rets = mei_irq_thread_read_handler(&complete_list, dev, &slots);
if (rets)
goto end;
}
- rets = mei_irq_thread_write_handler(&complete_list, dev, &slots);
+ rets = mei_irq_thread_write_handler(dev, &complete_list);
end:
dev_dbg(&dev->pdev->dev, "end of bottom half function.\n");
dev->host_hw_state = mei_hcsr_read(dev);
@@ -1531,21 +1216,20 @@
wake_up_interruptible(&dev->wait_recvd_msg);
bus_message_received = false;
}
- if (list_empty(&complete_list.mei_cb.cb_list))
+ if (list_empty(&complete_list.list))
return IRQ_HANDLED;
- list_for_each_entry_safe(cb_pos, cb_next,
- &complete_list.mei_cb.cb_list, cb_list) {
- cl = (struct mei_cl *)cb_pos->file_private;
- list_del(&cb_pos->cb_list);
+ list_for_each_entry_safe(cb_pos, cb_next, &complete_list.list, list) {
+ cl = cb_pos->cl;
+ list_del(&cb_pos->list);
if (cl) {
if (cl != &dev->iamthif_cl) {
dev_dbg(&dev->pdev->dev, "completing call back.\n");
_mei_cmpl(cl, cb_pos);
cb_pos = NULL;
} else if (cl == &dev->iamthif_cl) {
- _mei_cmpl_iamthif(dev, cb_pos);
+ mei_amthif_complete(dev, cb_pos);
}
}
}
diff --git a/drivers/misc/mei/iorw.c b/drivers/misc/mei/iorw.c
index fcba98e..eb93a1b 100644
--- a/drivers/misc/mei/iorw.c
+++ b/drivers/misc/mei/iorw.c
@@ -39,6 +39,95 @@
#include "interface.h"
/**
+ * mei_io_cb_free - free mei_cb_private related memory
+ *
+ * @cb: mei callback struct
+ */
+void mei_io_cb_free(struct mei_cl_cb *cb)
+{
+ if (cb == NULL)
+ return;
+
+ kfree(cb->request_buffer.data);
+ kfree(cb->response_buffer.data);
+ kfree(cb);
+}
+/**
+ * mei_io_cb_init - allocate and initialize io callback
+ *
+ * @cl - mei client
+ * @file: pointer to file structure
+ *
+ * returns mei_cl_cb pointer or NULL;
+ */
+struct mei_cl_cb *mei_io_cb_init(struct mei_cl *cl, struct file *fp)
+{
+ struct mei_cl_cb *cb;
+
+ cb = kzalloc(sizeof(struct mei_cl_cb), GFP_KERNEL);
+ if (!cb)
+ return NULL;
+
+ mei_io_list_init(cb);
+
+ cb->file_object = fp;
+ cb->cl = cl;
+ cb->buf_idx = 0;
+ return cb;
+}
+
+
+/**
+ * mei_io_cb_alloc_req_buf - allocate request buffer
+ *
+ * @cb - io callback structure
+ * @size: size of the buffer
+ *
+ * returns 0 on success
+ * -EINVAL if cb is NULL
+ * -ENOMEM if allocation failed
+ */
+int mei_io_cb_alloc_req_buf(struct mei_cl_cb *cb, size_t length)
+{
+ if (!cb)
+ return -EINVAL;
+
+ if (length == 0)
+ return 0;
+
+ cb->request_buffer.data = kmalloc(length, GFP_KERNEL);
+ if (!cb->request_buffer.data)
+ return -ENOMEM;
+ cb->request_buffer.size = length;
+ return 0;
+}
+/**
+ * mei_io_cb_alloc_req_buf - allocate respose buffer
+ *
+ * @cb - io callback structure
+ * @size: size of the buffer
+ *
+ * returns 0 on success
+ * -EINVAL if cb is NULL
+ * -ENOMEM if allocation failed
+ */
+int mei_io_cb_alloc_resp_buf(struct mei_cl_cb *cb, size_t length)
+{
+ if (!cb)
+ return -EINVAL;
+
+ if (length == 0)
+ return 0;
+
+ cb->response_buffer.data = kmalloc(length, GFP_KERNEL);
+ if (!cb->response_buffer.data)
+ return -ENOMEM;
+ cb->response_buffer.size = length;
+ return 0;
+}
+
+
+/**
* mei_me_cl_by_id return index to me_clients for client_id
*
* @dev: the device structure
@@ -82,9 +171,7 @@
struct mei_cl_cb *cb;
struct mei_client *client;
struct mei_cl *cl;
- struct mei_cl *cl_pos = NULL;
- struct mei_cl *cl_next = NULL;
- long timeout = CONNECT_TIMEOUT;
+ long timeout = mei_secs_to_jiffies(MEI_CL_CONNECT_TIMEOUT);
int i;
int err;
int rets;
@@ -97,16 +184,14 @@
dev_dbg(&dev->pdev->dev, "mei_ioctl_connect_client() Entry\n");
-
/* buffered ioctl cb */
- cb = kzalloc(sizeof(struct mei_cl_cb), GFP_KERNEL);
+ cb = mei_io_cb_init(cl, file);
if (!cb) {
rets = -ENOMEM;
goto end;
}
- INIT_LIST_HEAD(&cb->cb_list);
- cb->major_file_operations = MEI_IOCTL;
+ cb->fop_type = MEI_FOP_IOCTL;
if (dev->dev_state != MEI_DEV_ENABLED) {
rets = -ENODEV;
@@ -142,21 +227,9 @@
goto end;
}
clear_bit(cl->host_client_id, dev->host_clients_map);
- list_for_each_entry_safe(cl_pos, cl_next,
- &dev->file_list, link) {
- if (mei_cl_cmp_id(cl, cl_pos)) {
- dev_dbg(&dev->pdev->dev,
- "remove file private data node host"
- " client = %d, ME client = %d.\n",
- cl_pos->host_client_id,
- cl_pos->me_client_id);
- list_del(&cl_pos->link);
- }
+ mei_me_cl_unlink(dev, cl);
- }
- dev_dbg(&dev->pdev->dev, "free file private data memory.\n");
kfree(cl);
-
cl = NULL;
file->private_data = &dev->iamthif_cl;
@@ -192,25 +265,19 @@
} else {
dev_dbg(&dev->pdev->dev, "Sending connect message - succeeded\n");
cl->timer_count = MEI_CONNECT_TIMEOUT;
- cb->file_private = cl;
- list_add_tail(&cb->cb_list,
- &dev->ctrl_rd_list.mei_cb.
- cb_list);
+ list_add_tail(&cb->list, &dev->ctrl_rd_list.list);
}
} else {
dev_dbg(&dev->pdev->dev, "Queuing the connect request due to device busy\n");
- cb->file_private = cl;
dev_dbg(&dev->pdev->dev, "add connect cb to control write list.\n");
- list_add_tail(&cb->cb_list,
- &dev->ctrl_wr_list.mei_cb.cb_list);
+ list_add_tail(&cb->list, &dev->ctrl_wr_list.list);
}
mutex_unlock(&dev->device_lock);
err = wait_event_timeout(dev->wait_recvd_msg,
(MEI_FILE_CONNECTED == cl->state ||
- MEI_FILE_DISCONNECTED == cl->state),
- timeout * HZ);
+ MEI_FILE_DISCONNECTED == cl->state), timeout);
mutex_lock(&dev->device_lock);
if (MEI_FILE_CONNECTED == cl->state) {
@@ -234,153 +301,7 @@
rets = 0;
end:
dev_dbg(&dev->pdev->dev, "free connect cb memory.");
- kfree(cb);
- return rets;
-}
-
-/**
- * find_amthi_read_list_entry - finds a amthilist entry for current file
- *
- * @dev: the device structure
- * @file: pointer to file object
- *
- * returns returned a list entry on success, NULL on failure.
- */
-struct mei_cl_cb *find_amthi_read_list_entry(
- struct mei_device *dev,
- struct file *file)
-{
- struct mei_cl *cl_temp;
- struct mei_cl_cb *pos = NULL;
- struct mei_cl_cb *next = NULL;
-
- list_for_each_entry_safe(pos, next,
- &dev->amthi_read_complete_list.mei_cb.cb_list, cb_list) {
- cl_temp = (struct mei_cl *)pos->file_private;
- if (cl_temp && cl_temp == &dev->iamthif_cl &&
- pos->file_object == file)
- return pos;
- }
- return NULL;
-}
-
-/**
- * amthi_read - read data from AMTHI client
- *
- * @dev: the device structure
- * @if_num: minor number
- * @file: pointer to file object
- * @*ubuf: pointer to user data in user space
- * @length: data length to read
- * @offset: data read offset
- *
- * Locking: called under "dev->device_lock" lock
- *
- * returns
- * returned data length on success,
- * zero if no data to read,
- * negative on failure.
- */
-int amthi_read(struct mei_device *dev, struct file *file,
- char __user *ubuf, size_t length, loff_t *offset)
-{
- int rets;
- int wait_ret;
- struct mei_cl_cb *cb = NULL;
- struct mei_cl *cl = file->private_data;
- unsigned long timeout;
- int i;
-
- /* Only Posible if we are in timeout */
- if (!cl || cl != &dev->iamthif_cl) {
- dev_dbg(&dev->pdev->dev, "bad file ext.\n");
- return -ETIMEDOUT;
- }
-
- i = mei_me_cl_by_id(dev, dev->iamthif_cl.me_client_id);
-
- if (i < 0) {
- dev_dbg(&dev->pdev->dev, "amthi client not found.\n");
- return -ENODEV;
- }
- dev_dbg(&dev->pdev->dev, "checking amthi data\n");
- cb = find_amthi_read_list_entry(dev, file);
-
- /* Check for if we can block or not*/
- if (cb == NULL && file->f_flags & O_NONBLOCK)
- return -EAGAIN;
-
-
- dev_dbg(&dev->pdev->dev, "waiting for amthi data\n");
- while (cb == NULL) {
- /* unlock the Mutex */
- mutex_unlock(&dev->device_lock);
-
- wait_ret = wait_event_interruptible(dev->iamthif_cl.wait,
- (cb = find_amthi_read_list_entry(dev, file)));
-
- if (wait_ret)
- return -ERESTARTSYS;
-
- dev_dbg(&dev->pdev->dev, "woke up from sleep\n");
-
- /* Locking again the Mutex */
- mutex_lock(&dev->device_lock);
- }
-
-
- dev_dbg(&dev->pdev->dev, "Got amthi data\n");
- dev->iamthif_timer = 0;
-
- if (cb) {
- timeout = cb->read_time + msecs_to_jiffies(IAMTHIF_READ_TIMER);
- dev_dbg(&dev->pdev->dev, "amthi timeout = %lud\n",
- timeout);
-
- if (time_after(jiffies, timeout)) {
- dev_dbg(&dev->pdev->dev, "amthi Time out\n");
- /* 15 sec for the message has expired */
- list_del(&cb->cb_list);
- rets = -ETIMEDOUT;
- goto free;
- }
- }
- /* if the whole message will fit remove it from the list */
- if (cb->information >= *offset && length >= (cb->information - *offset))
- list_del(&cb->cb_list);
- else if (cb->information > 0 && cb->information <= *offset) {
- /* end of the message has been reached */
- list_del(&cb->cb_list);
- rets = 0;
- goto free;
- }
- /* else means that not full buffer will be read and do not
- * remove message from deletion list
- */
-
- dev_dbg(&dev->pdev->dev, "amthi cb->response_buffer size - %d\n",
- cb->response_buffer.size);
- dev_dbg(&dev->pdev->dev, "amthi cb->information - %lu\n",
- cb->information);
-
- /* length is being turncated to PAGE_SIZE, however,
- * the information may be longer */
- length = min_t(size_t, length, (cb->information - *offset));
-
- if (copy_to_user(ubuf, cb->response_buffer.data + *offset, length))
- rets = -EFAULT;
- else {
- rets = length;
- if ((*offset + length) < cb->information) {
- *offset += length;
- goto out;
- }
- }
-free:
- dev_dbg(&dev->pdev->dev, "free amthi cb memory.\n");
- *offset = 0;
- mei_free_cb_private(cb);
-out:
+ mei_io_cb_free(cb);
return rets;
}
@@ -396,7 +317,7 @@
int mei_start_read(struct mei_device *dev, struct mei_cl *cl)
{
struct mei_cl_cb *cb;
- int rets = 0;
+ int rets;
int i;
if (cl->state != MEI_FILE_CONNECTED)
@@ -405,187 +326,41 @@
if (dev->dev_state != MEI_DEV_ENABLED)
return -ENODEV;
- dev_dbg(&dev->pdev->dev, "check if read is pending.\n");
if (cl->read_pending || cl->read_cb) {
dev_dbg(&dev->pdev->dev, "read is pending.\n");
return -EBUSY;
}
+ i = mei_me_cl_by_id(dev, cl->me_client_id);
+ if (i < 0) {
+ dev_err(&dev->pdev->dev, "no such me client %d\n",
+ cl->me_client_id);
+ return -ENODEV;
+ }
- cb = kzalloc(sizeof(struct mei_cl_cb), GFP_KERNEL);
+ cb = mei_io_cb_init(cl, NULL);
if (!cb)
return -ENOMEM;
- dev_dbg(&dev->pdev->dev, "allocation call back successful. host client = %d, ME client = %d\n",
- cl->host_client_id, cl->me_client_id);
- i = mei_me_cl_by_id(dev, cl->me_client_id);
- if (i < 0) {
- rets = -ENODEV;
- goto unlock;
- }
+ rets = mei_io_cb_alloc_resp_buf(cb,
+ dev->me_clients[i].props.max_msg_length);
+ if (rets)
+ goto err;
- cb->response_buffer.size = dev->me_clients[i].props.max_msg_length;
- cb->response_buffer.data =
- kmalloc(cb->response_buffer.size, GFP_KERNEL);
- if (!cb->response_buffer.data) {
- rets = -ENOMEM;
- goto unlock;
- }
- dev_dbg(&dev->pdev->dev, "allocation call back data success.\n");
- cb->major_file_operations = MEI_READ;
- /* make sure information is zero before we start */
- cb->information = 0;
- cb->file_private = (void *) cl;
+ cb->fop_type = MEI_FOP_READ;
cl->read_cb = cb;
if (dev->mei_host_buffer_is_empty) {
dev->mei_host_buffer_is_empty = false;
if (mei_send_flow_control(dev, cl)) {
rets = -ENODEV;
- goto unlock;
+ goto err;
}
- list_add_tail(&cb->cb_list, &dev->read_list.mei_cb.cb_list);
+ list_add_tail(&cb->list, &dev->read_list.list);
} else {
- list_add_tail(&cb->cb_list, &dev->ctrl_wr_list.mei_cb.cb_list);
+ list_add_tail(&cb->list, &dev->ctrl_wr_list.list);
}
return rets;
-unlock:
- mei_free_cb_private(cb);
+err:
+ mei_io_cb_free(cb);
return rets;
}
-/**
- * amthi_write - write iamthif data to amthi client
- *
- * @dev: the device structure
- * @cb: mei call back struct
- *
- * returns 0 on success, <0 on failure.
- */
-int amthi_write(struct mei_device *dev, struct mei_cl_cb *cb)
-{
- struct mei_msg_hdr mei_hdr;
- int ret;
-
- if (!dev || !cb)
- return -ENODEV;
-
- dev_dbg(&dev->pdev->dev, "write data to amthi client.\n");
-
- dev->iamthif_state = MEI_IAMTHIF_WRITING;
- dev->iamthif_current_cb = cb;
- dev->iamthif_file_object = cb->file_object;
- dev->iamthif_canceled = false;
- dev->iamthif_ioctl = true;
- dev->iamthif_msg_buf_size = cb->request_buffer.size;
- memcpy(dev->iamthif_msg_buf, cb->request_buffer.data,
- cb->request_buffer.size);
-
- ret = mei_flow_ctrl_creds(dev, &dev->iamthif_cl);
- if (ret < 0)
- return ret;
-
- if (ret && dev->mei_host_buffer_is_empty) {
- ret = 0;
- dev->mei_host_buffer_is_empty = false;
- if (cb->request_buffer.size > mei_hbuf_max_data(dev)) {
- mei_hdr.length = mei_hbuf_max_data(dev);
- mei_hdr.msg_complete = 0;
- } else {
- mei_hdr.length = cb->request_buffer.size;
- mei_hdr.msg_complete = 1;
- }
-
- mei_hdr.host_addr = dev->iamthif_cl.host_client_id;
- mei_hdr.me_addr = dev->iamthif_cl.me_client_id;
- mei_hdr.reserved = 0;
- dev->iamthif_msg_buf_index += mei_hdr.length;
- if (mei_write_message(dev, &mei_hdr,
- (unsigned char *)(dev->iamthif_msg_buf),
- mei_hdr.length))
- return -ENODEV;
-
- if (mei_hdr.msg_complete) {
- if (mei_flow_ctrl_reduce(dev, &dev->iamthif_cl))
- return -ENODEV;
- dev->iamthif_flow_control_pending = true;
- dev->iamthif_state = MEI_IAMTHIF_FLOW_CONTROL;
- dev_dbg(&dev->pdev->dev, "add amthi cb to write waiting list\n");
- dev->iamthif_current_cb = cb;
- dev->iamthif_file_object = cb->file_object;
- list_add_tail(&cb->cb_list,
- &dev->write_waiting_list.mei_cb.cb_list);
- } else {
- dev_dbg(&dev->pdev->dev, "message does not complete, "
- "so add amthi cb to write list.\n");
- list_add_tail(&cb->cb_list,
- &dev->write_list.mei_cb.cb_list);
- }
- } else {
- if (!(dev->mei_host_buffer_is_empty))
- dev_dbg(&dev->pdev->dev, "host buffer is not empty");
-
- dev_dbg(&dev->pdev->dev, "No flow control credentials, "
- "so add iamthif cb to write list.\n");
- list_add_tail(&cb->cb_list, &dev->write_list.mei_cb.cb_list);
- }
- return 0;
-}
-
-/**
- * iamthif_ioctl_send_msg - send cmd data to amthi client
- *
- * @dev: the device structure
- *
- * returns 0 on success, <0 on failure.
- */
-void mei_run_next_iamthif_cmd(struct mei_device *dev)
-{
- struct mei_cl *cl_tmp;
- struct mei_cl_cb *pos = NULL;
- struct mei_cl_cb *next = NULL;
- int status;
-
- if (!dev)
- return;
-
- dev->iamthif_msg_buf_size = 0;
- dev->iamthif_msg_buf_index = 0;
- dev->iamthif_canceled = false;
- dev->iamthif_ioctl = true;
- dev->iamthif_state = MEI_IAMTHIF_IDLE;
- dev->iamthif_timer = 0;
- dev->iamthif_file_object = NULL;
-
- dev_dbg(&dev->pdev->dev, "complete amthi cmd_list cb.\n");
-
- list_for_each_entry_safe(pos, next,
- &dev->amthi_cmd_list.mei_cb.cb_list, cb_list) {
- list_del(&pos->cb_list);
- cl_tmp = (struct mei_cl *)pos->file_private;
-
- if (cl_tmp && cl_tmp == &dev->iamthif_cl) {
- status = amthi_write(dev, pos);
- if (status) {
- dev_dbg(&dev->pdev->dev,
- "amthi write failed status = %d\n",
- status);
- return;
- }
- break;
- }
- }
-}
-
-/**
- * mei_free_cb_private - free mei_cb_private related memory
- *
- * @cb: mei callback struct
- */
-void mei_free_cb_private(struct mei_cl_cb *cb)
-{
- if (cb == NULL)
- return;
-
- kfree(cb->request_buffer.data);
- kfree(cb->response_buffer.data);
- kfree(cb);
-}
diff --git a/drivers/misc/mei/main.c b/drivers/misc/mei/main.c
index e8b0858..43fb52f 100644
--- a/drivers/misc/mei/main.c
+++ b/drivers/misc/mei/main.c
@@ -90,93 +90,6 @@
/**
- * mei_clear_list - removes all callbacks associated with file
- * from mei_cb_list
- *
- * @dev: device structure.
- * @file: file structure
- * @mei_cb_list: callbacks list
- *
- * mei_clear_list is called to clear resources associated with file
- * when application calls close function or Ctrl-C was pressed
- *
- * returns true if callback removed from the list, false otherwise
- */
-static bool mei_clear_list(struct mei_device *dev,
- struct file *file, struct list_head *mei_cb_list)
-{
- struct mei_cl_cb *cb_pos = NULL;
- struct mei_cl_cb *cb_next = NULL;
- struct file *file_temp;
- bool removed = false;
-
- /* list all list member */
- list_for_each_entry_safe(cb_pos, cb_next, mei_cb_list, cb_list) {
- file_temp = (struct file *)cb_pos->file_object;
- /* check if list member associated with a file */
- if (file_temp == file) {
- /* remove member from the list */
- list_del(&cb_pos->cb_list);
- /* check if cb equal to current iamthif cb */
- if (dev->iamthif_current_cb == cb_pos) {
- dev->iamthif_current_cb = NULL;
- /* send flow control to iamthif client */
- mei_send_flow_control(dev, &dev->iamthif_cl);
- }
- /* free all allocated buffers */
- mei_free_cb_private(cb_pos);
- cb_pos = NULL;
- removed = true;
- }
- }
- return removed;
-}
-
-/**
- * mei_clear_lists - removes all callbacks associated with file
- *
- * @dev: device structure
- * @file: file structure
- *
- * mei_clear_lists is called to clear resources associated with file
- * when application calls close function or Ctrl-C was pressed
- *
- * returns true if callback removed from the list, false otherwise
- */
-static bool mei_clear_lists(struct mei_device *dev, struct file *file)
-{
- bool removed = false;
-
- /* remove callbacks associated with a file */
- mei_clear_list(dev, file, &dev->amthi_cmd_list.mei_cb.cb_list);
- if (mei_clear_list(dev, file,
- &dev->amthi_read_complete_list.mei_cb.cb_list))
- removed = true;
-
- mei_clear_list(dev, file, &dev->ctrl_rd_list.mei_cb.cb_list);
-
- if (mei_clear_list(dev, file, &dev->ctrl_wr_list.mei_cb.cb_list))
- removed = true;
-
- if (mei_clear_list(dev, file, &dev->write_waiting_list.mei_cb.cb_list))
- removed = true;
-
- if (mei_clear_list(dev, file, &dev->write_list.mei_cb.cb_list))
- removed = true;
-
- /* check if iamthif_current_cb not NULL */
- if (dev->iamthif_current_cb && !removed) {
- /* check file and iamthif current cb association */
- if (dev->iamthif_current_cb->file_object == file) {
- /* remove cb */
- mei_free_cb_private(dev->iamthif_current_cb);
- dev->iamthif_current_cb = NULL;
- removed = true;
- }
- }
- return removed;
-}
-/**
* find_read_list_entry - find read list entry
*
* @dev: device structure
@@ -192,14 +105,9 @@
struct mei_cl_cb *next = NULL;
dev_dbg(&dev->pdev->dev, "remove read_list CB\n");
- list_for_each_entry_safe(pos, next,
- &dev->read_list.mei_cb.cb_list, cb_list) {
- struct mei_cl *cl_temp;
- cl_temp = (struct mei_cl *)pos->file_private;
-
- if (mei_cl_cmp_id(cl, cl_temp))
+ list_for_each_entry_safe(pos, next, &dev->read_list.list, list)
+ if (mei_cl_cmp_id(cl, pos->cl))
return pos;
- }
return NULL;
}
@@ -297,67 +205,51 @@
dev = cl->dev;
mutex_lock(&dev->device_lock);
- if (cl != &dev->iamthif_cl) {
- if (cl->state == MEI_FILE_CONNECTED) {
- cl->state = MEI_FILE_DISCONNECTING;
- dev_dbg(&dev->pdev->dev,
- "disconnecting client host client = %d, "
- "ME client = %d\n",
- cl->host_client_id,
- cl->me_client_id);
- rets = mei_disconnect_host_client(dev, cl);
- }
- mei_cl_flush_queues(cl);
- dev_dbg(&dev->pdev->dev, "remove client host client = %d, ME client = %d\n",
+ if (cl == &dev->iamthif_cl) {
+ rets = mei_amthif_release(dev, file);
+ goto out;
+ }
+ if (cl->state == MEI_FILE_CONNECTED) {
+ cl->state = MEI_FILE_DISCONNECTING;
+ dev_dbg(&dev->pdev->dev,
+ "disconnecting client host client = %d, "
+ "ME client = %d\n",
cl->host_client_id,
cl->me_client_id);
-
- if (dev->open_handle_count > 0) {
- clear_bit(cl->host_client_id, dev->host_clients_map);
- dev->open_handle_count--;
- }
- mei_remove_client_from_file_list(dev, cl->host_client_id);
-
- /* free read cb */
- cb = NULL;
- if (cl->read_cb) {
- cb = find_read_list_entry(dev, cl);
- /* Remove entry from read list */
- if (cb)
- list_del(&cb->cb_list);
-
- cb = cl->read_cb;
- cl->read_cb = NULL;
- }
-
- file->private_data = NULL;
-
- if (cb) {
- mei_free_cb_private(cb);
- cb = NULL;
- }
-
- kfree(cl);
- } else {
- if (dev->open_handle_count > 0)
- dev->open_handle_count--;
-
- if (dev->iamthif_file_object == file &&
- dev->iamthif_state != MEI_IAMTHIF_IDLE) {
-
- dev_dbg(&dev->pdev->dev, "amthi canceled iamthif state %d\n",
- dev->iamthif_state);
- dev->iamthif_canceled = true;
- if (dev->iamthif_state == MEI_IAMTHIF_READ_COMPLETE) {
- dev_dbg(&dev->pdev->dev, "run next amthi iamthif cb\n");
- mei_run_next_iamthif_cmd(dev);
- }
- }
-
- if (mei_clear_lists(dev, file))
- dev->iamthif_state = MEI_IAMTHIF_IDLE;
-
+ rets = mei_disconnect_host_client(dev, cl);
}
+ mei_cl_flush_queues(cl);
+ dev_dbg(&dev->pdev->dev, "remove client host client = %d, ME client = %d\n",
+ cl->host_client_id,
+ cl->me_client_id);
+
+ if (dev->open_handle_count > 0) {
+ clear_bit(cl->host_client_id, dev->host_clients_map);
+ dev->open_handle_count--;
+ }
+ mei_me_cl_unlink(dev, cl);
+
+ /* free read cb */
+ cb = NULL;
+ if (cl->read_cb) {
+ cb = find_read_list_entry(dev, cl);
+ /* Remove entry from read list */
+ if (cb)
+ list_del(&cb->list);
+
+ cb = cl->read_cb;
+ cl->read_cb = NULL;
+ }
+
+ file->private_data = NULL;
+
+ if (cb) {
+ mei_io_cb_free(cb);
+ cb = NULL;
+ }
+
+ kfree(cl);
+out:
mutex_unlock(&dev->device_lock);
return rets;
}
@@ -411,20 +303,19 @@
}
if (cl == &dev->iamthif_cl) {
- rets = amthi_read(dev, file, ubuf, length, offset);
+ rets = mei_amthif_read(dev, file, ubuf, length, offset);
goto out;
}
- if (cl->read_cb && cl->read_cb->information > *offset) {
+ if (cl->read_cb && cl->read_cb->buf_idx > *offset) {
cb = cl->read_cb;
goto copy_buffer;
- } else if (cl->read_cb && cl->read_cb->information > 0 &&
- cl->read_cb->information <= *offset) {
+ } else if (cl->read_cb && cl->read_cb->buf_idx > 0 &&
+ cl->read_cb->buf_idx <= *offset) {
cb = cl->read_cb;
rets = 0;
goto free;
- } else if ((!cl->read_cb || !cl->read_cb->information) &&
- *offset > 0) {
+ } else if ((!cl->read_cb || !cl->read_cb->buf_idx) && *offset > 0) {
/*Offset needs to be cleaned for contiguous reads*/
*offset = 0;
rets = 0;
@@ -481,16 +372,15 @@
copy_buffer:
dev_dbg(&dev->pdev->dev, "cb->response_buffer size - %d\n",
cb->response_buffer.size);
- dev_dbg(&dev->pdev->dev, "cb->information - %lu\n",
- cb->information);
- if (length == 0 || ubuf == NULL || *offset > cb->information) {
+ dev_dbg(&dev->pdev->dev, "cb->buf_idx - %lu\n", cb->buf_idx);
+ if (length == 0 || ubuf == NULL || *offset > cb->buf_idx) {
rets = -EMSGSIZE;
goto free;
}
- /* length is being truncated to PAGE_SIZE, however, */
- /* information size may be longer */
- length = min_t(size_t, length, (cb->information - *offset));
+ /* length is being truncated to PAGE_SIZE,
+ * however buf_idx may point beyond that */
+ length = min_t(size_t, length, cb->buf_idx - *offset);
if (copy_to_user(ubuf, cb->response_buffer.data + *offset, length)) {
rets = -EFAULT;
@@ -499,15 +389,15 @@
rets = length;
*offset += length;
- if ((unsigned long)*offset < cb->information)
+ if ((unsigned long)*offset < cb->buf_idx)
goto out;
free:
cb_pos = find_read_list_entry(dev, cl);
/* Remove entry from read list */
if (cb_pos)
- list_del(&cb_pos->cb_list);
- mei_free_cb_private(cb);
+ list_del(&cb_pos->list);
+ mei_io_cb_free(cb);
cl->reading_state = MEI_IDLE;
cl->read_cb = NULL;
cl->read_pending = 0;
@@ -516,7 +406,6 @@
mutex_unlock(&dev->device_lock);
return rets;
}
-
/**
* mei_write - the write function.
*
@@ -546,23 +435,39 @@
mutex_lock(&dev->device_lock);
if (dev->dev_state != MEI_DEV_ENABLED) {
- mutex_unlock(&dev->device_lock);
- return -ENODEV;
+ rets = -ENODEV;
+ goto err;
}
+ i = mei_me_cl_by_id(dev, cl->me_client_id);
+ if (i < 0) {
+ rets = -ENODEV;
+ goto err;
+ }
+ if (length > dev->me_clients[i].props.max_msg_length || length <= 0) {
+ rets = -EMSGSIZE;
+ goto err;
+ }
+
+ if (cl->state != MEI_FILE_CONNECTED) {
+ rets = -ENODEV;
+ dev_err(&dev->pdev->dev, "host client = %d, is not connected to ME client = %d",
+ cl->host_client_id, cl->me_client_id);
+ goto err;
+ }
if (cl == &dev->iamthif_cl) {
- write_cb = find_amthi_read_list_entry(dev, file);
+ write_cb = mei_amthif_find_read_list_entry(dev, file);
if (write_cb) {
timeout = write_cb->read_time +
- msecs_to_jiffies(IAMTHIF_READ_TIMER);
+ mei_secs_to_jiffies(MEI_IAMTHIF_READ_TIMER);
if (time_after(jiffies, timeout) ||
- cl->reading_state == MEI_READ_COMPLETE) {
- *offset = 0;
- list_del(&write_cb->cb_list);
- mei_free_cb_private(write_cb);
- write_cb = NULL;
+ cl->reading_state == MEI_READ_COMPLETE) {
+ *offset = 0;
+ list_del(&write_cb->list);
+ mei_io_cb_free(write_cb);
+ write_cb = NULL;
}
}
}
@@ -572,8 +477,8 @@
*offset = 0;
write_cb = find_read_list_entry(dev, cl);
if (write_cb) {
- list_del(&write_cb->cb_list);
- mei_free_cb_private(write_cb);
+ list_del(&write_cb->list);
+ mei_io_cb_free(write_cb);
write_cb = NULL;
cl->reading_state = MEI_IDLE;
cl->read_cb = NULL;
@@ -583,24 +488,21 @@
*offset = 0;
- write_cb = kzalloc(sizeof(struct mei_cl_cb), GFP_KERNEL);
+ write_cb = mei_io_cb_init(cl, file);
if (!write_cb) {
- mutex_unlock(&dev->device_lock);
- return -ENOMEM;
+ dev_err(&dev->pdev->dev, "write cb allocation failed\n");
+ rets = -ENOMEM;
+ goto err;
}
+ rets = mei_io_cb_alloc_req_buf(write_cb, length);
+ if (rets)
+ goto err;
- write_cb->file_object = file;
- write_cb->file_private = cl;
- write_cb->request_buffer.data = kmalloc(length, GFP_KERNEL);
- rets = -ENOMEM;
- if (!write_cb->request_buffer.data)
- goto unlock_dev;
+ dev_dbg(&dev->pdev->dev, "cb request size = %zd\n", length);
- dev_dbg(&dev->pdev->dev, "length =%d\n", (int) length);
-
- rets = -EFAULT;
- if (copy_from_user(write_cb->request_buffer.data, ubuf, length))
- goto unlock_dev;
+ rets = copy_from_user(write_cb->request_buffer.data, ubuf, length);
+ if (rets)
+ goto err;
cl->sm_state = 0;
if (length == 4 &&
@@ -612,139 +514,71 @@
write_cb->request_buffer.data, 4) == 0)))
cl->sm_state |= MEI_WD_STATE_INDEPENDENCE_MSG_SENT;
- INIT_LIST_HEAD(&write_cb->cb_list);
if (cl == &dev->iamthif_cl) {
- write_cb->response_buffer.data =
- kmalloc(dev->iamthif_mtu, GFP_KERNEL);
- if (!write_cb->response_buffer.data) {
- rets = -ENOMEM;
- goto unlock_dev;
- }
- if (dev->dev_state != MEI_DEV_ENABLED) {
- rets = -ENODEV;
- goto unlock_dev;
- }
- i = mei_me_cl_by_id(dev, dev->iamthif_cl.me_client_id);
- if (i < 0) {
- rets = -ENODEV;
- goto unlock_dev;
- }
- if (length > dev->me_clients[i].props.max_msg_length ||
- length <= 0) {
- rets = -EMSGSIZE;
- goto unlock_dev;
- }
+ rets = mei_amthif_write(dev, write_cb);
- write_cb->response_buffer.size = dev->iamthif_mtu;
- write_cb->major_file_operations = MEI_IOCTL;
- write_cb->information = 0;
- write_cb->request_buffer.size = length;
- if (dev->iamthif_cl.state != MEI_FILE_CONNECTED) {
- rets = -ENODEV;
- goto unlock_dev;
- }
-
- if (!list_empty(&dev->amthi_cmd_list.mei_cb.cb_list) ||
- dev->iamthif_state != MEI_IAMTHIF_IDLE) {
- dev_dbg(&dev->pdev->dev, "amthi_state = %d\n",
- (int) dev->iamthif_state);
- dev_dbg(&dev->pdev->dev, "add amthi cb to amthi cmd waiting list\n");
- list_add_tail(&write_cb->cb_list,
- &dev->amthi_cmd_list.mei_cb.cb_list);
- rets = length;
- } else {
- dev_dbg(&dev->pdev->dev, "call amthi write\n");
- rets = amthi_write(dev, write_cb);
-
- if (rets) {
- dev_dbg(&dev->pdev->dev, "amthi write failed with status = %d\n",
- rets);
- goto unlock_dev;
- }
- rets = length;
+ if (rets) {
+ dev_err(&dev->pdev->dev,
+ "amthi write failed with status = %d\n", rets);
+ goto err;
}
mutex_unlock(&dev->device_lock);
- return rets;
+ return length;
}
- write_cb->major_file_operations = MEI_WRITE;
- /* make sure information is zero before we start */
-
- write_cb->information = 0;
- write_cb->request_buffer.size = length;
+ write_cb->fop_type = MEI_FOP_WRITE;
dev_dbg(&dev->pdev->dev, "host client = %d, ME client = %d\n",
cl->host_client_id, cl->me_client_id);
- if (cl->state != MEI_FILE_CONNECTED) {
- rets = -ENODEV;
- dev_dbg(&dev->pdev->dev, "host client = %d, is not connected to ME client = %d",
- cl->host_client_id,
- cl->me_client_id);
- goto unlock_dev;
- }
- i = mei_me_cl_by_id(dev, cl->me_client_id);
- if (i < 0) {
- rets = -ENODEV;
- goto unlock_dev;
- }
- if (length > dev->me_clients[i].props.max_msg_length || length <= 0) {
- rets = -EINVAL;
- goto unlock_dev;
- }
- write_cb->file_private = cl;
-
rets = mei_flow_ctrl_creds(dev, cl);
if (rets < 0)
- goto unlock_dev;
+ goto err;
- if (rets && dev->mei_host_buffer_is_empty) {
- rets = 0;
- dev->mei_host_buffer_is_empty = false;
- if (length > mei_hbuf_max_data(dev)) {
- mei_hdr.length = mei_hbuf_max_data(dev);
- mei_hdr.msg_complete = 0;
- } else {
- mei_hdr.length = length;
- mei_hdr.msg_complete = 1;
- }
- mei_hdr.host_addr = cl->host_client_id;
- mei_hdr.me_addr = cl->me_client_id;
- mei_hdr.reserved = 0;
- dev_dbg(&dev->pdev->dev, "call mei_write_message header=%08x.\n",
- *((u32 *) &mei_hdr));
- if (mei_write_message(dev, &mei_hdr,
- (unsigned char *) (write_cb->request_buffer.data),
- mei_hdr.length)) {
- rets = -ENODEV;
- goto unlock_dev;
- }
+ if (rets == 0 || dev->mei_host_buffer_is_empty == false) {
+ write_cb->buf_idx = 0;
+ mei_hdr.msg_complete = 0;
cl->writing_state = MEI_WRITING;
- write_cb->information = mei_hdr.length;
- if (mei_hdr.msg_complete) {
- if (mei_flow_ctrl_reduce(dev, cl)) {
- rets = -ENODEV;
- goto unlock_dev;
- }
- list_add_tail(&write_cb->cb_list,
- &dev->write_waiting_list.mei_cb.cb_list);
- } else {
- list_add_tail(&write_cb->cb_list,
- &dev->write_list.mei_cb.cb_list);
- }
-
- } else {
-
- write_cb->information = 0;
- cl->writing_state = MEI_WRITING;
- list_add_tail(&write_cb->cb_list,
- &dev->write_list.mei_cb.cb_list);
+ goto out;
}
+
+ dev->mei_host_buffer_is_empty = false;
+ if (length > mei_hbuf_max_data(dev)) {
+ mei_hdr.length = mei_hbuf_max_data(dev);
+ mei_hdr.msg_complete = 0;
+ } else {
+ mei_hdr.length = length;
+ mei_hdr.msg_complete = 1;
+ }
+ mei_hdr.host_addr = cl->host_client_id;
+ mei_hdr.me_addr = cl->me_client_id;
+ mei_hdr.reserved = 0;
+ dev_dbg(&dev->pdev->dev, "call mei_write_message header=%08x.\n",
+ *((u32 *) &mei_hdr));
+ if (mei_write_message(dev, &mei_hdr,
+ write_cb->request_buffer.data, mei_hdr.length)) {
+ rets = -ENODEV;
+ goto err;
+ }
+ cl->writing_state = MEI_WRITING;
+ write_cb->buf_idx = mei_hdr.length;
+
+out:
+ if (mei_hdr.msg_complete) {
+ if (mei_flow_ctrl_reduce(dev, cl)) {
+ rets = -ENODEV;
+ goto err;
+ }
+ list_add_tail(&write_cb->list, &dev->write_waiting_list.list);
+ } else {
+ list_add_tail(&write_cb->list, &dev->write_list.list);
+ }
+
mutex_unlock(&dev->device_lock);
return length;
-unlock_dev:
+err:
mutex_unlock(&dev->device_lock);
- mei_free_cb_private(write_cb);
+ mei_io_cb_free(write_cb);
return rets;
}
@@ -860,15 +694,7 @@
if (cl == &dev->iamthif_cl) {
- mutex_unlock(&dev->device_lock);
- poll_wait(file, &dev->iamthif_cl.wait, wait);
- mutex_lock(&dev->device_lock);
- if (dev->iamthif_state == MEI_IAMTHIF_READ_COMPLETE &&
- dev->iamthif_file_object == file) {
- mask |= (POLLIN | POLLRDNORM);
- dev_dbg(&dev->pdev->dev, "run next amthi cb\n");
- mei_run_next_iamthif_cmd(dev);
- }
+ mask = mei_amthif_poll(dev, file, wait);
goto out;
}
@@ -917,7 +743,7 @@
*
* returns true if ME Interface is valid, false otherwise
*/
-static bool __devinit mei_quirk_probe(struct pci_dev *pdev,
+static bool mei_quirk_probe(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
u32 reg;
@@ -939,7 +765,7 @@
*
* returns 0 on success, <0 on failure.
*/
-static int __devinit mei_probe(struct pci_dev *pdev,
+static int mei_probe(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
struct mei_device *dev;
@@ -1003,6 +829,8 @@
goto disable_msi;
}
INIT_DELAYED_WORK(&dev->timer_work, mei_timer);
+ INIT_WORK(&dev->init_work, mei_host_client_init);
+
if (mei_hw_init(dev)) {
dev_err(&pdev->dev, "init hw failure.\n");
err = -ENODEV;
@@ -1054,7 +882,7 @@
* mei_remove is called by the PCI subsystem to alert the driver
* that it should release a PCI device.
*/
-static void __devexit mei_remove(struct pci_dev *pdev)
+static void mei_remove(struct pci_dev *pdev)
{
struct mei_device *dev;
@@ -1087,8 +915,8 @@
/* remove entry if already in list */
dev_dbg(&pdev->dev, "list del iamthif and wd file list.\n");
- mei_remove_client_from_file_list(dev, dev->wd_cl.host_client_id);
- mei_remove_client_from_file_list(dev, dev->iamthif_cl.host_client_id);
+ mei_me_cl_unlink(dev, &dev->wd_cl);
+ mei_me_cl_unlink(dev, &dev->iamthif_cl);
dev->iamthif_current_cb = NULL;
dev->me_clients_num = 0;
@@ -1195,8 +1023,8 @@
.name = KBUILD_MODNAME,
.id_table = mei_pci_tbl,
.probe = mei_probe,
- .remove = __devexit_p(mei_remove),
- .shutdown = __devexit_p(mei_remove),
+ .remove = mei_remove,
+ .shutdown = mei_remove,
.driver.pm = MEI_PM_OPS,
};
diff --git a/drivers/misc/mei/mei_dev.h b/drivers/misc/mei/mei_dev.h
index adb35fb..25da045 100644
--- a/drivers/misc/mei/mei_dev.h
+++ b/drivers/misc/mei/mei_dev.h
@@ -19,6 +19,7 @@
#include <linux/types.h>
#include <linux/watchdog.h>
+#include <linux/poll.h>
#include <linux/mei.h>
#include "hw.h"
@@ -125,13 +126,20 @@
MEI_WD_STOPPING,
};
-/* MEI CB */
-enum mei_cb_major_types {
- MEI_READ = 0,
- MEI_WRITE,
- MEI_IOCTL,
- MEI_OPEN,
- MEI_CLOSE
+/**
+ * enum mei_cb_file_ops - file operation associated with the callback
+ * @MEI_FOP_READ - read
+ * @MEI_FOP_WRITE - write
+ * @MEI_FOP_IOCTL - ioctl
+ * @MEI_FOP_OPEN - open
+ * @MEI_FOP_CLOSE - close
+ */
+enum mei_cb_file_ops {
+ MEI_FOP_READ = 0,
+ MEI_FOP_WRITE,
+ MEI_FOP_IOCTL,
+ MEI_FOP_OPEN,
+ MEI_FOP_CLOSE
};
/*
@@ -143,13 +151,21 @@
};
+struct mei_cl;
+
+/**
+ * struct mei_cl_cb - file operation callback structure
+ *
+ * @cl - file client who is running this operation
+ * @fop_type - file operation type
+ */
struct mei_cl_cb {
- struct list_head cb_list;
- enum mei_cb_major_types major_file_operations;
- void *file_private;
+ struct list_head list;
+ struct mei_cl *cl;
+ enum mei_cb_file_ops fop_type;
struct mei_message_data request_buffer;
struct mei_message_data response_buffer;
- unsigned long information;
+ unsigned long buf_idx;
unsigned long read_time;
struct file *file_object;
};
@@ -175,29 +191,23 @@
struct mei_cl_cb *read_cb;
};
-struct mei_io_list {
- struct mei_cl_cb mei_cb;
-};
-
/**
- * struct mei_deive - MEI private device struct
+ * struct mei_device - MEI private device struct
* @hbuf_depth - depth of host(write) buffer
+ * @wr_ext_msg - buffer for hbm control responses (set in read cycle)
*/
struct mei_device {
struct pci_dev *pdev; /* pointer to pci device struct */
/*
* lists of queues
*/
- /* array of pointers to aio lists */
- struct mei_io_list read_list; /* driver read queue */
- struct mei_io_list write_list; /* driver write queue */
- struct mei_io_list write_waiting_list; /* write waiting queue */
- struct mei_io_list ctrl_wr_list; /* managed write IOCTL list */
- struct mei_io_list ctrl_rd_list; /* managed read IOCTL list */
- struct mei_io_list amthi_cmd_list; /* amthi list for cmd waiting */
+ /* array of pointers to aio lists */
+ struct mei_cl_cb read_list; /* driver read queue */
+ struct mei_cl_cb write_list; /* driver write queue */
+ struct mei_cl_cb write_waiting_list; /* write waiting queue */
+ struct mei_cl_cb ctrl_wr_list; /* managed write IOCTL list */
+ struct mei_cl_cb ctrl_rd_list; /* managed read IOCTL list */
- /* driver managed amthi list for reading completed amthi cmd data */
- struct mei_io_list amthi_read_complete_list;
/*
* list of files
*/
@@ -235,11 +245,13 @@
u16 init_clients_timer;
bool need_reset;
- u32 extra_write_index;
unsigned char rd_msg_buf[MEI_RD_MSG_BUF_SIZE]; /* control messages */
- u32 wr_msg_buf[128]; /* used for control messages */
- u32 ext_msg_buf[8]; /* for control responses */
u32 rd_msg_hdr;
+ u32 wr_msg_buf[128]; /* used for control messages */
+ struct {
+ struct mei_msg_hdr hdr;
+ unsigned char data[4]; /* All HBM messages are 4 bytes */
+ } wr_ext_msg; /* for control responses */
struct hbm_version version;
@@ -253,12 +265,15 @@
struct mei_cl wd_cl;
enum mei_wd_states wd_state;
- bool wd_interface_reg;
bool wd_pending;
u16 wd_timeout;
unsigned char wd_data[MEI_WD_START_MSG_SIZE];
+ /* amthif list for cmd waiting */
+ struct mei_cl_cb amthif_cmd_list;
+ /* driver managed amthif list for reading completed amthif cmd data */
+ struct mei_cl_cb amthif_rd_complete_list;
struct file *iamthif_file_object;
struct mei_cl iamthif_cl;
struct mei_cl_cb *iamthif_current_cb;
@@ -272,8 +287,15 @@
bool iamthif_flow_control_pending;
bool iamthif_ioctl;
bool iamthif_canceled;
+
+ struct work_struct init_work;
};
+static inline unsigned long mei_secs_to_jiffies(unsigned long sec)
+{
+ return msecs_to_jiffies(sec * MSEC_PER_SEC);
+}
+
/*
* mei init function prototypes
@@ -284,21 +306,34 @@
int mei_task_initialize_clients(void *data);
int mei_initialize_clients(struct mei_device *dev);
int mei_disconnect_host_client(struct mei_device *dev, struct mei_cl *cl);
-void mei_remove_client_from_file_list(struct mei_device *dev, u8 host_client_id);
-void mei_host_init_iamthif(struct mei_device *dev);
void mei_allocate_me_clients_storage(struct mei_device *dev);
-int mei_me_cl_update_filext(struct mei_device *dev, struct mei_cl *cl,
+int mei_me_cl_link(struct mei_device *dev, struct mei_cl *cl,
const uuid_le *cguid, u8 host_client_id);
+void mei_me_cl_unlink(struct mei_device *dev, struct mei_cl *cl);
int mei_me_cl_by_uuid(const struct mei_device *dev, const uuid_le *cuuid);
int mei_me_cl_by_id(struct mei_device *dev, u8 client_id);
/*
- * MEI IO List Functions
+ * MEI IO Functions
*/
-void mei_io_list_init(struct mei_io_list *list);
-void mei_io_list_flush(struct mei_io_list *list, struct mei_cl *cl);
+struct mei_cl_cb *mei_io_cb_init(struct mei_cl *cl, struct file *fp);
+void mei_io_cb_free(struct mei_cl_cb *priv_cb);
+int mei_io_cb_alloc_req_buf(struct mei_cl_cb *cb, size_t length);
+int mei_io_cb_alloc_resp_buf(struct mei_cl_cb *cb, size_t length);
+
+
+/**
+ * mei_io_list_init - Sets up a queue list.
+ *
+ * @list: An instance cl callback structure
+ */
+static inline void mei_io_list_init(struct mei_cl_cb *list)
+{
+ INIT_LIST_HEAD(&list->list);
+}
+void mei_io_list_flush(struct mei_cl_cb *list, struct mei_cl *cl);
/*
* MEI ME Client Functions
@@ -330,7 +365,8 @@
*/
void mei_host_start_message(struct mei_device *dev);
void mei_host_enum_clients_message(struct mei_device *dev);
-int mei_host_client_properties(struct mei_device *dev);
+int mei_host_client_enumerate(struct mei_device *dev);
+void mei_host_client_init(struct work_struct *work);
/*
* MEI interrupt functions prototype
@@ -347,18 +383,40 @@
int mei_start_read(struct mei_device *dev, struct mei_cl *cl);
-int amthi_write(struct mei_device *dev, struct mei_cl_cb *priv_cb);
-int amthi_read(struct mei_device *dev, struct file *file,
- char __user *ubuf, size_t length, loff_t *offset);
+/*
+ * AMTHIF - AMT Host Interface Functions
+ */
+void mei_amthif_reset_params(struct mei_device *dev);
-struct mei_cl_cb *find_amthi_read_list_entry(struct mei_device *dev,
+void mei_amthif_host_init(struct mei_device *dev);
+
+int mei_amthif_write(struct mei_device *dev, struct mei_cl_cb *priv_cb);
+
+int mei_amthif_read(struct mei_device *dev, struct file *file,
+ char __user *ubuf, size_t length, loff_t *offset);
+
+unsigned int mei_amthif_poll(struct mei_device *dev,
+ struct file *file, poll_table *wait);
+
+int mei_amthif_release(struct mei_device *dev, struct file *file);
+
+struct mei_cl_cb *mei_amthif_find_read_list_entry(struct mei_device *dev,
struct file *file);
-void mei_run_next_iamthif_cmd(struct mei_device *dev);
+void mei_amthif_run_next_cmd(struct mei_device *dev);
-void mei_free_cb_private(struct mei_cl_cb *priv_cb);
+int mei_amthif_read_message(struct mei_cl_cb *complete_list,
+ struct mei_device *dev, struct mei_msg_hdr *mei_hdr);
+
+int mei_amthif_irq_write_complete(struct mei_device *dev, s32 *slots,
+ struct mei_cl_cb *cb, struct mei_cl_cb *cmpl_list);
+
+void mei_amthif_complete(struct mei_device *dev, struct mei_cl_cb *cb);
+int mei_amthif_irq_read_message(struct mei_cl_cb *complete_list,
+ struct mei_device *dev, struct mei_msg_hdr *mei_hdr);
+int mei_amthif_irq_read(struct mei_device *dev, s32 *slots);
/*
* Register Access Function
@@ -437,4 +495,15 @@
void mei_enable_interrupts(struct mei_device *dev);
void mei_disable_interrupts(struct mei_device *dev);
+static inline struct mei_msg_hdr *mei_hbm_hdr(u32 *buf, size_t length)
+{
+ struct mei_msg_hdr *hdr = (struct mei_msg_hdr *)buf;
+ hdr->host_addr = 0;
+ hdr->me_addr = 0;
+ hdr->length = length;
+ hdr->msg_complete = 1;
+ hdr->reserved = 0;
+ return hdr;
+}
+
#endif
diff --git a/drivers/misc/mei/wd.c b/drivers/misc/mei/wd.c
index d96c537..636409f 100644
--- a/drivers/misc/mei/wd.c
+++ b/drivers/misc/mei/wd.c
@@ -62,6 +62,7 @@
*/
int mei_wd_host_init(struct mei_device *dev)
{
+ int id;
mei_cl_init(&dev->wd_cl, dev);
/* look for WD client and connect to it */
@@ -69,12 +70,11 @@
dev->wd_timeout = MEI_WD_DEFAULT_TIMEOUT;
dev->wd_state = MEI_WD_IDLE;
- /* find ME WD client */
- mei_me_cl_update_filext(dev, &dev->wd_cl,
+ /* Connect WD ME client to the host client */
+ id = mei_me_cl_link(dev, &dev->wd_cl,
&mei_wd_guid, MEI_WD_HOST_CLIENT_ID);
- dev_dbg(&dev->pdev->dev, "wd: check client\n");
- if (MEI_FILE_CONNECTING != dev->wd_cl.state) {
+ if (id < 0) {
dev_info(&dev->pdev->dev, "wd: failed to find the client\n");
return -ENOENT;
}
@@ -85,7 +85,7 @@
dev->wd_cl.host_client_id = 0;
return -EIO;
}
- dev->wd_cl.timer_count = CONNECT_TIMEOUT;
+ dev->wd_cl.timer_count = MEI_CONNECT_TIMEOUT;
return 0;
}
@@ -360,23 +360,20 @@
if (watchdog_register_device(&amt_wd_dev)) {
dev_err(&dev->pdev->dev,
"wd: unable to register watchdog device.\n");
- dev->wd_interface_reg = false;
return;
}
dev_dbg(&dev->pdev->dev,
"wd: successfully register watchdog interface.\n");
- dev->wd_interface_reg = true;
watchdog_set_drvdata(&amt_wd_dev, dev);
}
void mei_watchdog_unregister(struct mei_device *dev)
{
- if (!dev->wd_interface_reg)
+ if (test_bit(WDOG_UNREGISTERED, &amt_wd_dev.status))
return;
watchdog_set_drvdata(&amt_wd_dev, NULL);
watchdog_unregister_device(&amt_wd_dev);
- dev->wd_interface_reg = false;
}
diff --git a/drivers/misc/pch_phub.c b/drivers/misc/pch_phub.c
index c9f20da..931e635 100644
--- a/drivers/misc/pch_phub.c
+++ b/drivers/misc/pch_phub.c
@@ -666,7 +666,7 @@
.write = pch_phub_bin_write,
};
-static int __devinit pch_phub_probe(struct pci_dev *pdev,
+static int pch_phub_probe(struct pci_dev *pdev,
const struct pci_device_id *id)
{
int retval;
@@ -819,7 +819,7 @@
return ret;
}
-static void __devexit pch_phub_remove(struct pci_dev *pdev)
+static void pch_phub_remove(struct pci_dev *pdev)
{
struct pch_phub_reg *chip = pci_get_drvdata(pdev);
@@ -888,7 +888,7 @@
.name = "pch_phub",
.id_table = pch_phub_pcidev_id,
.probe = pch_phub_probe,
- .remove = __devexit_p(pch_phub_remove),
+ .remove = pch_phub_remove,
.suspend = pch_phub_suspend,
.resume = pch_phub_resume
};
diff --git a/drivers/misc/phantom.c b/drivers/misc/phantom.c
index 21b28fc..68b7c77 100644
--- a/drivers/misc/phantom.c
+++ b/drivers/misc/phantom.c
@@ -324,7 +324,7 @@
* Init and deinit driver
*/
-static unsigned int __devinit phantom_get_free(void)
+static unsigned int phantom_get_free(void)
{
unsigned int i;
@@ -335,7 +335,7 @@
return i;
}
-static int __devinit phantom_probe(struct pci_dev *pdev,
+static int phantom_probe(struct pci_dev *pdev,
const struct pci_device_id *pci_id)
{
struct phantom_device *pht;
@@ -435,7 +435,7 @@
return retval;
}
-static void __devexit phantom_remove(struct pci_dev *pdev)
+static void phantom_remove(struct pci_dev *pdev)
{
struct phantom_device *pht = pci_get_drvdata(pdev);
unsigned int minor = MINOR(pht->cdev.dev);
@@ -487,7 +487,7 @@
#define phantom_resume NULL
#endif
-static struct pci_device_id phantom_pci_tbl[] __devinitdata = {
+static struct pci_device_id phantom_pci_tbl[] = {
{ .vendor = PCI_VENDOR_ID_PLX, .device = PCI_DEVICE_ID_PLX_9050,
.subvendor = PCI_VENDOR_ID_PLX, .subdevice = PCI_DEVICE_ID_PLX_9050,
.class = PCI_CLASS_BRIDGE_OTHER << 8, .class_mask = 0xffff00 },
@@ -499,7 +499,7 @@
.name = "phantom",
.id_table = phantom_pci_tbl,
.probe = phantom_probe,
- .remove = __devexit_p(phantom_remove),
+ .remove = phantom_remove,
.suspend = phantom_suspend,
.resume = phantom_resume
};
diff --git a/drivers/misc/pti.c b/drivers/misc/pti.c
index 4999b34..f84ff0c 100644
--- a/drivers/misc/pti.c
+++ b/drivers/misc/pti.c
@@ -76,7 +76,7 @@
*/
static DEFINE_MUTEX(alloclock);
-static const struct pci_device_id pci_ids[] __devinitconst = {
+static const struct pci_device_id pci_ids[] = {
{PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x82B)},
{0}
};
@@ -796,7 +796,7 @@
* 0 for success
* otherwise, error
*/
-static int __devinit pti_pci_probe(struct pci_dev *pdev,
+static int pti_pci_probe(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
unsigned int a;
@@ -879,14 +879,17 @@
* PCI bus.
* @pdev: variable containing pci info of PTI.
*/
-static void __devexit pti_pci_remove(struct pci_dev *pdev)
+static void pti_pci_remove(struct pci_dev *pdev)
{
struct pti_dev *drv_data = pci_get_drvdata(pdev);
+ unsigned int a;
unregister_console(&pti_console);
- tty_unregister_device(pti_tty_driver, 0);
- tty_unregister_device(pti_tty_driver, 1);
+ for (a = 0; a < PTITTY_MINOR_NUM; a++) {
+ tty_unregister_device(pti_tty_driver, a);
+ tty_port_destroy(&drv_data->port[a]);
+ }
iounmap(drv_data->pti_ioaddr);
pci_set_drvdata(pdev, NULL);
@@ -901,7 +904,7 @@
.name = PCINAME,
.id_table = pci_ids,
.probe = pti_pci_probe,
- .remove = __devexit_p(pti_pci_remove),
+ .remove = pti_pci_remove,
};
/**
diff --git a/drivers/misc/spear13xx_pcie_gadget.c b/drivers/misc/spear13xx_pcie_gadget.c
index 123ed98..7deb25d 100644
--- a/drivers/misc/spear13xx_pcie_gadget.c
+++ b/drivers/misc/spear13xx_pcie_gadget.c
@@ -711,7 +711,7 @@
spear_dbi_write_reg(config, PCI_INTERRUPT_LINE, 1, 1);
}
-static int __devinit spear_pcie_gadget_probe(struct platform_device *pdev)
+static int spear_pcie_gadget_probe(struct platform_device *pdev)
{
struct resource *res0, *res1;
unsigned int status = 0;
@@ -853,7 +853,7 @@
return status;
}
-static int __devexit spear_pcie_gadget_remove(struct platform_device *pdev)
+static int spear_pcie_gadget_remove(struct platform_device *pdev)
{
struct resource *res0, *res1;
static struct pcie_gadget_target *target;
diff --git a/drivers/misc/ti-st/st_core.c b/drivers/misc/ti-st/st_core.c
index 46937b1..b90a224 100644
--- a/drivers/misc/ti-st/st_core.c
+++ b/drivers/misc/ti-st/st_core.c
@@ -511,7 +511,6 @@
unsigned long flags = 0;
st_kim_ref(&st_gdata, 0);
- pr_info("%s(%d) ", __func__, new_proto->chnl_id);
if (st_gdata == NULL || new_proto == NULL || new_proto->recv == NULL
|| new_proto->reg_complete_cb == NULL) {
pr_err("gdata/new_proto/recv or reg_complete_cb not ready");
diff --git a/drivers/misc/ti-st/st_kim.c b/drivers/misc/ti-st/st_kim.c
index 04a8199..9ff942a 100644
--- a/drivers/misc/ti-st/st_kim.c
+++ b/drivers/misc/ti-st/st_kim.c
@@ -705,9 +705,9 @@
static struct dentry *kim_debugfs_dir;
static int kim_probe(struct platform_device *pdev)
{
- long status;
struct kim_data_s *kim_gdata;
struct ti_st_plat_data *pdata = pdev->dev.platform_data;
+ int err;
if ((pdev->id != -1) && (pdev->id < MAX_ST_DEVICES)) {
/* multiple devices could exist */
@@ -724,10 +724,11 @@
}
dev_set_drvdata(&pdev->dev, kim_gdata);
- status = st_core_init(&kim_gdata->core_data);
- if (status != 0) {
+ err = st_core_init(&kim_gdata->core_data);
+ if (err != 0) {
pr_err(" ST core init failed");
- return -EIO;
+ err = -EIO;
+ goto err_core_init;
}
/* refer to itself */
kim_gdata->core_data->kim_data = kim_gdata;
@@ -738,10 +739,10 @@
init_completion(&kim_gdata->kim_rcvd);
init_completion(&kim_gdata->ldisc_installed);
- status = sysfs_create_group(&pdev->dev.kobj, &uim_attr_grp);
- if (status) {
+ err = sysfs_create_group(&pdev->dev.kobj, &uim_attr_grp);
+ if (err) {
pr_err("failed to create sysfs entries");
- return status;
+ goto err_sysfs_group;
}
/* copying platform data */
@@ -753,8 +754,8 @@
kim_debugfs_dir = debugfs_create_dir("ti-st", NULL);
if (IS_ERR(kim_debugfs_dir)) {
pr_err(" debugfs entries creation failed ");
- kim_debugfs_dir = NULL;
- return -EIO;
+ err = -EIO;
+ goto err_debugfs_dir;
}
debugfs_create_file("version", S_IRUGO, kim_debugfs_dir,
@@ -763,6 +764,17 @@
kim_gdata, &list_debugfs_fops);
pr_info(" debugfs entries created ");
return 0;
+
+err_debugfs_dir:
+ sysfs_remove_group(&pdev->dev.kobj, &uim_attr_grp);
+
+err_sysfs_group:
+ st_core_exit(kim_gdata->core_data);
+
+err_core_init:
+ kfree(kim_gdata);
+
+ return err;
}
static int kim_remove(struct platform_device *pdev)
diff --git a/drivers/misc/ti_dac7512.c b/drivers/misc/ti_dac7512.c
index 5acbba1..1d86407 100644
--- a/drivers/misc/ti_dac7512.c
+++ b/drivers/misc/ti_dac7512.c
@@ -54,7 +54,7 @@
.attrs = dac7512_attributes,
};
-static int __devinit dac7512_probe(struct spi_device *spi)
+static int dac7512_probe(struct spi_device *spi)
{
int ret;
@@ -67,7 +67,7 @@
return sysfs_create_group(&spi->dev.kobj, &dac7512_attr_group);
}
-static int __devexit dac7512_remove(struct spi_device *spi)
+static int dac7512_remove(struct spi_device *spi)
{
sysfs_remove_group(&spi->dev.kobj, &dac7512_attr_group);
return 0;
@@ -79,7 +79,7 @@
.owner = THIS_MODULE,
},
.probe = dac7512_probe,
- .remove = __devexit_p(dac7512_remove),
+ .remove = dac7512_remove,
};
module_spi_driver(dac7512_driver);
diff --git a/drivers/misc/tsl2550.c b/drivers/misc/tsl2550.c
index 0beb298..1e7bc0e 100644
--- a/drivers/misc/tsl2550.c
+++ b/drivers/misc/tsl2550.c
@@ -347,7 +347,7 @@
*/
static struct i2c_driver tsl2550_driver;
-static int __devinit tsl2550_probe(struct i2c_client *client,
+static int tsl2550_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
@@ -405,7 +405,7 @@
return err;
}
-static int __devexit tsl2550_remove(struct i2c_client *client)
+static int tsl2550_remove(struct i2c_client *client)
{
sysfs_remove_group(&client->dev.kobj, &tsl2550_attr_group);
@@ -450,7 +450,7 @@
.suspend = tsl2550_suspend,
.resume = tsl2550_resume,
.probe = tsl2550_probe,
- .remove = __devexit_p(tsl2550_remove),
+ .remove = tsl2550_remove,
.id_table = tsl2550_id,
};
diff --git a/drivers/mmc/card/sdio_uart.c b/drivers/mmc/card/sdio_uart.c
index d2339ea..bd57a11 100644
--- a/drivers/mmc/card/sdio_uart.c
+++ b/drivers/mmc/card/sdio_uart.c
@@ -66,8 +66,6 @@
struct sdio_uart_port {
struct tty_port port;
- struct kref kref;
- struct tty_struct *tty;
unsigned int index;
struct sdio_func *func;
struct mutex func_lock;
@@ -93,7 +91,6 @@
{
int index, ret = -EBUSY;
- kref_init(&port->kref);
mutex_init(&port->func_lock);
spin_lock_init(&port->write_lock);
if (kfifo_alloc(&port->xmit_fifo, FIFO_SIZE, GFP_KERNEL))
@@ -123,23 +120,15 @@
spin_lock(&sdio_uart_table_lock);
port = sdio_uart_table[index];
if (port)
- kref_get(&port->kref);
+ tty_port_get(&port->port);
spin_unlock(&sdio_uart_table_lock);
return port;
}
-static void sdio_uart_port_destroy(struct kref *kref)
-{
- struct sdio_uart_port *port =
- container_of(kref, struct sdio_uart_port, kref);
- kfifo_free(&port->xmit_fifo);
- kfree(port);
-}
-
static void sdio_uart_port_put(struct sdio_uart_port *port)
{
- kref_put(&port->kref, sdio_uart_port_destroy);
+ tty_port_put(&port->port);
}
static void sdio_uart_port_remove(struct sdio_uart_port *port)
@@ -737,6 +726,14 @@
sdio_uart_release_func(port);
}
+static void sdio_uart_port_destroy(struct tty_port *tport)
+{
+ struct sdio_uart_port *port =
+ container_of(tport, struct sdio_uart_port, port);
+ kfifo_free(&port->xmit_fifo);
+ kfree(port);
+}
+
/**
* sdio_uart_install - install method
* @driver: the driver in use (sdio_uart in our case)
@@ -1045,6 +1042,7 @@
.carrier_raised = uart_carrier_raised,
.shutdown = sdio_uart_shutdown,
.activate = sdio_uart_activate,
+ .destruct = sdio_uart_port_destroy,
};
static const struct tty_operations sdio_uart_ops = {
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 83eb1e0..737e4ed 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -81,6 +81,18 @@
If unsure, say Y.
+config MMC_SDHCI_ACPI
+ tristate "SDHCI support for ACPI enumerated SDHCI controllers"
+ depends on MMC_SDHCI && ACPI
+ help
+ This selects support for ACPI enumerated SDHCI controllers,
+ identified by ACPI Compatibility ID PNP0D40 or specific
+ ACPI Hardware IDs.
+
+ If you have a controller with this interface, say Y or M here.
+
+ If unsure, say N.
+
config MMC_SDHCI_PLTFM
tristate "SDHCI platform and OF driver helper"
depends on MMC_SDHCI
@@ -612,3 +624,10 @@
To compile this driver as a module, choose M here: the
module will be called wmt-sdmmc.
+
+config MMC_REALTEK_PCI
+ tristate "Realtek PCI-E SD/MMC Card Interface Driver"
+ depends on MFD_RTSX_PCI
+ help
+ Say Y here to include driver code to support SD/MMC card interface
+ of Realtek PCI-E card reader
diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
index 39d5e12..b648058 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -9,6 +9,7 @@
obj-$(CONFIG_MMC_SDHCI) += sdhci.o
obj-$(CONFIG_MMC_SDHCI_PCI) += sdhci-pci.o
obj-$(subst m,y,$(CONFIG_MMC_SDHCI_PCI)) += sdhci-pci-data.o
+obj-$(CONFIG_MMC_SDHCI_ACPI) += sdhci-acpi.o
obj-$(CONFIG_MMC_SDHCI_PXAV3) += sdhci-pxav3.o
obj-$(CONFIG_MMC_SDHCI_PXAV2) += sdhci-pxav2.o
obj-$(CONFIG_MMC_SDHCI_S3C) += sdhci-s3c.o
@@ -46,6 +47,8 @@
obj-$(CONFIG_MMC_USHC) += ushc.o
obj-$(CONFIG_MMC_WMT) += wmt-sdmmc.o
+obj-$(CONFIG_MMC_REALTEK_PCI) += rtsx_pci_sdmmc.o
+
obj-$(CONFIG_MMC_SDHCI_PLTFM) += sdhci-pltfm.o
obj-$(CONFIG_MMC_SDHCI_CNS3XXX) += sdhci-cns3xxx.o
obj-$(CONFIG_MMC_SDHCI_ESDHC_IMX) += sdhci-esdhc-imx.o
diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
index ddf096e..5248ba4 100644
--- a/drivers/mmc/host/atmel-mci.c
+++ b/drivers/mmc/host/atmel-mci.c
@@ -511,7 +511,7 @@
MODULE_DEVICE_TABLE(of, atmci_dt_ids);
-static struct mci_platform_data __devinit*
+static struct mci_platform_data*
atmci_of_init(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
diff --git a/drivers/mmc/host/au1xmmc.c b/drivers/mmc/host/au1xmmc.c
index dbd0c8a..127a8fa 100644
--- a/drivers/mmc/host/au1xmmc.c
+++ b/drivers/mmc/host/au1xmmc.c
@@ -943,7 +943,7 @@
.enable_sdio_irq = au1xmmc_enable_sdio_irq,
};
-static int __devinit au1xmmc_probe(struct platform_device *pdev)
+static int au1xmmc_probe(struct platform_device *pdev)
{
struct mmc_host *mmc;
struct au1xmmc_host *host;
@@ -1114,7 +1114,7 @@
return ret;
}
-static int __devexit au1xmmc_remove(struct platform_device *pdev)
+static int au1xmmc_remove(struct platform_device *pdev)
{
struct au1xmmc_host *host = platform_get_drvdata(pdev);
diff --git a/drivers/mmc/host/bfin_sdh.c b/drivers/mmc/host/bfin_sdh.c
index b9b463e..fb4348c 100644
--- a/drivers/mmc/host/bfin_sdh.c
+++ b/drivers/mmc/host/bfin_sdh.c
@@ -522,7 +522,7 @@
SSYNC();
}
-static int __devinit sdh_probe(struct platform_device *pdev)
+static int sdh_probe(struct platform_device *pdev)
{
struct mmc_host *mmc;
struct sdh_host *host;
@@ -617,7 +617,7 @@
return ret;
}
-static int __devexit sdh_remove(struct platform_device *pdev)
+static int sdh_remove(struct platform_device *pdev)
{
struct mmc_host *mmc = platform_get_drvdata(pdev);
@@ -680,7 +680,7 @@
static struct platform_driver sdh_driver = {
.probe = sdh_probe,
- .remove = __devexit_p(sdh_remove),
+ .remove = sdh_remove,
.suspend = sdh_suspend,
.resume = sdh_resume,
.driver = {
diff --git a/drivers/mmc/host/cb710-mmc.c b/drivers/mmc/host/cb710-mmc.c
index 83693fd..777ca20 100644
--- a/drivers/mmc/host/cb710-mmc.c
+++ b/drivers/mmc/host/cb710-mmc.c
@@ -690,7 +690,7 @@
#endif /* CONFIG_PM */
-static int __devinit cb710_mmc_init(struct platform_device *pdev)
+static int cb710_mmc_init(struct platform_device *pdev)
{
struct cb710_slot *slot = cb710_pdev_to_slot(pdev);
struct cb710_chip *chip = cb710_slot_to_chip(slot);
@@ -746,7 +746,7 @@
return err;
}
-static int __devexit cb710_mmc_exit(struct platform_device *pdev)
+static int cb710_mmc_exit(struct platform_device *pdev)
{
struct cb710_slot *slot = cb710_pdev_to_slot(pdev);
struct mmc_host *mmc = cb710_slot_to_mmc(slot);
@@ -773,7 +773,7 @@
static struct platform_driver cb710_mmc_driver = {
.driver.name = "cb710-mmc",
.probe = cb710_mmc_init,
- .remove = __devexit_p(cb710_mmc_exit),
+ .remove = cb710_mmc_exit,
#ifdef CONFIG_PM
.suspend = cb710_mmc_suspend,
.resume = cb710_mmc_resume,
diff --git a/drivers/mmc/host/dw_mmc-pci.c b/drivers/mmc/host/dw_mmc-pci.c
index 53a09cb..8ee0f74 100644
--- a/drivers/mmc/host/dw_mmc-pci.c
+++ b/drivers/mmc/host/dw_mmc-pci.c
@@ -37,7 +37,7 @@
.fifo_depth = 32,
};
-static int __devinit dw_mci_pci_probe(struct pci_dev *pdev,
+static int dw_mci_pci_probe(struct pci_dev *pdev,
const struct pci_device_id *entries)
{
struct dw_mci *host;
@@ -85,7 +85,7 @@
return ret;
}
-static void __devexit dw_mci_pci_remove(struct pci_dev *pdev)
+static void dw_mci_pci_remove(struct pci_dev *pdev)
{
struct dw_mci *host = pci_get_drvdata(pdev);
diff --git a/drivers/mmc/host/dw_mmc-pltfm.c b/drivers/mmc/host/dw_mmc-pltfm.c
index 4e13370..222036c 100644
--- a/drivers/mmc/host/dw_mmc-pltfm.c
+++ b/drivers/mmc/host/dw_mmc-pltfm.c
@@ -62,12 +62,12 @@
}
EXPORT_SYMBOL_GPL(dw_mci_pltfm_register);
-static int __devinit dw_mci_pltfm_probe(struct platform_device *pdev)
+static int dw_mci_pltfm_probe(struct platform_device *pdev)
{
return dw_mci_pltfm_register(pdev, NULL);
}
-static int __devexit dw_mci_pltfm_remove(struct platform_device *pdev)
+static int dw_mci_pltfm_remove(struct platform_device *pdev)
{
struct dw_mci *host = platform_get_drvdata(pdev);
diff --git a/drivers/mmc/host/dw_mmc-pltfm.h b/drivers/mmc/host/dw_mmc-pltfm.h
index 2ac37b8..68e7fd2 100644
--- a/drivers/mmc/host/dw_mmc-pltfm.h
+++ b/drivers/mmc/host/dw_mmc-pltfm.h
@@ -14,7 +14,7 @@
extern int dw_mci_pltfm_register(struct platform_device *pdev,
const struct dw_mci_drv_data *drv_data);
-extern int __devexit dw_mci_pltfm_remove(struct platform_device *pdev);
+extern int dw_mci_pltfm_remove(struct platform_device *pdev);
extern const struct dev_pm_ops dw_mci_pltfm_pmops;
#endif /* _DW_MMC_PLTFM_H_ */
diff --git a/drivers/mmc/host/jz4740_mmc.c b/drivers/mmc/host/jz4740_mmc.c
index c8852a8..2391c6b 100644
--- a/drivers/mmc/host/jz4740_mmc.c
+++ b/drivers/mmc/host/jz4740_mmc.c
@@ -702,7 +702,7 @@
JZ_GPIO_BULK_PIN(MSC_DATA3),
};
-static int __devinit jz4740_mmc_request_gpio(struct device *dev, int gpio,
+static int jz4740_mmc_request_gpio(struct device *dev, int gpio,
const char *name, bool output, int value)
{
int ret;
@@ -724,7 +724,7 @@
return 0;
}
-static int __devinit jz4740_mmc_request_gpios(struct platform_device *pdev)
+static int jz4740_mmc_request_gpios(struct platform_device *pdev)
{
int ret;
struct jz4740_mmc_platform_data *pdata = pdev->dev.platform_data;
@@ -759,7 +759,7 @@
return ret;
}
-static int __devinit jz4740_mmc_request_cd_irq(struct platform_device *pdev,
+static int jz4740_mmc_request_cd_irq(struct platform_device *pdev,
struct jz4740_mmc_host *host)
{
struct jz4740_mmc_platform_data *pdata = pdev->dev.platform_data;
@@ -802,7 +802,7 @@
return num_pins;
}
-static int __devinit jz4740_mmc_probe(struct platform_device* pdev)
+static int jz4740_mmc_probe(struct platform_device* pdev)
{
int ret;
struct mmc_host *mmc;
@@ -938,7 +938,7 @@
return ret;
}
-static int __devexit jz4740_mmc_remove(struct platform_device *pdev)
+static int jz4740_mmc_remove(struct platform_device *pdev)
{
struct jz4740_mmc_host *host = platform_get_drvdata(pdev);
@@ -1004,7 +1004,7 @@
static struct platform_driver jz4740_mmc_driver = {
.probe = jz4740_mmc_probe,
- .remove = __devexit_p(jz4740_mmc_remove),
+ .remove = jz4740_mmc_remove,
.driver = {
.name = "jz4740-mmc",
.owner = THIS_MODULE,
diff --git a/drivers/mmc/host/mmc_spi.c b/drivers/mmc/host/mmc_spi.c
index a600eab..74145d1 100644
--- a/drivers/mmc/host/mmc_spi.c
+++ b/drivers/mmc/host/mmc_spi.c
@@ -1485,7 +1485,7 @@
}
-static int __devexit mmc_spi_remove(struct spi_device *spi)
+static int mmc_spi_remove(struct spi_device *spi)
{
struct mmc_host *mmc = dev_get_drvdata(&spi->dev);
struct mmc_spi_host *host;
@@ -1517,7 +1517,7 @@
return 0;
}
-static struct of_device_id mmc_spi_of_match_table[] __devinitdata = {
+static struct of_device_id mmc_spi_of_match_table[] = {
{ .compatible = "mmc-spi-slot", },
{},
};
@@ -1529,7 +1529,7 @@
.of_match_table = mmc_spi_of_match_table,
},
.probe = mmc_spi_probe,
- .remove = __devexit_p(mmc_spi_remove),
+ .remove = mmc_spi_remove,
};
module_spi_driver(mmc_spi_driver);
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index edc3e9b..ec28d17 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -261,7 +261,7 @@
* no custom DMA interfaces are supported.
*/
#ifdef CONFIG_DMA_ENGINE
-static void __devinit mmci_dma_setup(struct mmci_host *host)
+static void mmci_dma_setup(struct mmci_host *host)
{
struct mmci_platform_data *plat = host->plat;
const char *rxname, *txname;
@@ -337,7 +337,7 @@
}
/*
- * This is used in __devinit or __devexit so inline it
+ * This is used in or so inline it
* so it can be discarded.
*/
static inline void mmci_dma_release(struct mmci_host *host)
@@ -1255,7 +1255,7 @@
}
#endif
-static int __devinit mmci_probe(struct amba_device *dev,
+static int mmci_probe(struct amba_device *dev,
const struct amba_id *id)
{
struct mmci_platform_data *plat = dev->dev.platform_data;
@@ -1522,7 +1522,7 @@
return ret;
}
-static int __devexit mmci_remove(struct amba_device *dev)
+static int mmci_remove(struct amba_device *dev)
{
struct mmc_host *mmc = amba_get_drvdata(dev);
@@ -1669,7 +1669,7 @@
.pm = &mmci_dev_pm_ops,
},
.probe = mmci_probe,
- .remove = __devexit_p(mmci_remove),
+ .remove = mmci_remove,
.id_table = mmci_ids,
};
diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c
index 48ad361..4e749ab 100644
--- a/drivers/mmc/host/omap.c
+++ b/drivers/mmc/host/omap.c
@@ -1214,7 +1214,7 @@
.set_ios = mmc_omap_set_ios,
};
-static int __devinit mmc_omap_new_slot(struct mmc_omap_host *host, int id)
+static int mmc_omap_new_slot(struct mmc_omap_host *host, int id)
{
struct mmc_omap_slot *slot = NULL;
struct mmc_host *mmc;
@@ -1309,7 +1309,7 @@
mmc_free_host(mmc);
}
-static int __devinit mmc_omap_probe(struct platform_device *pdev)
+static int mmc_omap_probe(struct platform_device *pdev)
{
struct omap_mmc_platform_data *pdata = pdev->dev.platform_data;
struct mmc_omap_host *host = NULL;
@@ -1478,7 +1478,7 @@
return ret;
}
-static int __devexit mmc_omap_remove(struct platform_device *pdev)
+static int mmc_omap_remove(struct platform_device *pdev)
{
struct mmc_omap_host *host = platform_get_drvdata(pdev);
int i;
@@ -1566,7 +1566,7 @@
static struct platform_driver mmc_omap_driver = {
.probe = mmc_omap_probe,
- .remove = __devexit_p(mmc_omap_remove),
+ .remove = mmc_omap_remove,
.suspend = mmc_omap_suspend,
.resume = mmc_omap_resume,
.driver = {
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index d0a912f..e1f3c11 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -1761,7 +1761,7 @@
}
#endif
-static int __devinit omap_hsmmc_probe(struct platform_device *pdev)
+static int omap_hsmmc_probe(struct platform_device *pdev)
{
struct omap_mmc_platform_data *pdata = pdev->dev.platform_data;
struct mmc_host *mmc;
@@ -2037,7 +2037,7 @@
return ret;
}
-static int __devexit omap_hsmmc_remove(struct platform_device *pdev)
+static int omap_hsmmc_remove(struct platform_device *pdev)
{
struct omap_hsmmc_host *host = platform_get_drvdata(pdev);
struct resource *res;
@@ -2204,7 +2204,7 @@
static struct platform_driver omap_hsmmc_driver = {
.probe = omap_hsmmc_probe,
- .remove = __devexit_p(omap_hsmmc_remove),
+ .remove = omap_hsmmc_remove,
.driver = {
.name = DRIVER_NAME,
.owner = THIS_MODULE,
diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c
index 3f9d6d5..2b2f65a 100644
--- a/drivers/mmc/host/pxamci.c
+++ b/drivers/mmc/host/pxamci.c
@@ -584,7 +584,7 @@
MODULE_DEVICE_TABLE(of, pxa_mmc_dt_ids);
-static int __devinit pxamci_of_init(struct platform_device *pdev)
+static int pxamci_of_init(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
struct pxamci_platform_data *pdata;
@@ -614,7 +614,7 @@
return 0;
}
#else
-static int __devinit pxamci_of_init(struct platform_device *pdev)
+static int pxamci_of_init(struct platform_device *pdev)
{
return 0;
}
diff --git a/drivers/mmc/host/rtsx_pci_sdmmc.c b/drivers/mmc/host/rtsx_pci_sdmmc.c
new file mode 100644
index 0000000..12eff6f
--- /dev/null
+++ b/drivers/mmc/host/rtsx_pci_sdmmc.c
@@ -0,0 +1,1348 @@
+/* Realtek PCI-Express SD/MMC Card Interface driver
+ *
+ * Copyright(c) 2009 Realtek Semiconductor Corp. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * Author:
+ * Wei WANG <wei_wang@realsil.com.cn>
+ * No. 450, Shenhu Road, Suzhou Industry Park, Suzhou, China
+ */
+
+#include <linux/module.h>
+#include <linux/highmem.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/mmc.h>
+#include <linux/mmc/sd.h>
+#include <linux/mmc/card.h>
+#include <linux/mfd/rtsx_pci.h>
+#include <asm/unaligned.h>
+
+/* SD Tuning Data Structure
+ * Record continuous timing phase path
+ */
+struct timing_phase_path {
+ int start;
+ int end;
+ int mid;
+ int len;
+};
+
+struct realtek_pci_sdmmc {
+ struct platform_device *pdev;
+ struct rtsx_pcr *pcr;
+ struct mmc_host *mmc;
+ struct mmc_request *mrq;
+
+ struct mutex host_mutex;
+
+ u8 ssc_depth;
+ unsigned int clock;
+ bool vpclk;
+ bool double_clk;
+ bool eject;
+ bool initial_mode;
+ bool ddr_mode;
+};
+
+static inline struct device *sdmmc_dev(struct realtek_pci_sdmmc *host)
+{
+ return &(host->pdev->dev);
+}
+
+static inline void sd_clear_error(struct realtek_pci_sdmmc *host)
+{
+ rtsx_pci_write_register(host->pcr, CARD_STOP,
+ SD_STOP | SD_CLR_ERR, SD_STOP | SD_CLR_ERR);
+}
+
+#ifdef DEBUG
+static void sd_print_debug_regs(struct realtek_pci_sdmmc *host)
+{
+ struct rtsx_pcr *pcr = host->pcr;
+ u16 i;
+ u8 *ptr;
+
+ /* Print SD host internal registers */
+ rtsx_pci_init_cmd(pcr);
+ for (i = 0xFDA0; i <= 0xFDAE; i++)
+ rtsx_pci_add_cmd(pcr, READ_REG_CMD, i, 0, 0);
+ for (i = 0xFD52; i <= 0xFD69; i++)
+ rtsx_pci_add_cmd(pcr, READ_REG_CMD, i, 0, 0);
+ rtsx_pci_send_cmd(pcr, 100);
+
+ ptr = rtsx_pci_get_cmd_data(pcr);
+ for (i = 0xFDA0; i <= 0xFDAE; i++)
+ dev_dbg(sdmmc_dev(host), "0x%04X: 0x%02x\n", i, *(ptr++));
+ for (i = 0xFD52; i <= 0xFD69; i++)
+ dev_dbg(sdmmc_dev(host), "0x%04X: 0x%02x\n", i, *(ptr++));
+}
+#else
+#define sd_print_debug_regs(host)
+#endif /* DEBUG */
+
+static int sd_read_data(struct realtek_pci_sdmmc *host, u8 *cmd, u16 byte_cnt,
+ u8 *buf, int buf_len, int timeout)
+{
+ struct rtsx_pcr *pcr = host->pcr;
+ int err, i;
+ u8 trans_mode;
+
+ dev_dbg(sdmmc_dev(host), "%s: SD/MMC CMD%d\n", __func__, cmd[0] - 0x40);
+
+ if (!buf)
+ buf_len = 0;
+
+ if ((cmd[0] & 0x3F) == MMC_SEND_TUNING_BLOCK)
+ trans_mode = SD_TM_AUTO_TUNING;
+ else
+ trans_mode = SD_TM_NORMAL_READ;
+
+ rtsx_pci_init_cmd(pcr);
+
+ for (i = 0; i < 5; i++)
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_CMD0 + i, 0xFF, cmd[i]);
+
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_BYTE_CNT_L, 0xFF, (u8)byte_cnt);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_BYTE_CNT_H,
+ 0xFF, (u8)(byte_cnt >> 8));
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_BLOCK_CNT_L, 0xFF, 1);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_BLOCK_CNT_H, 0xFF, 0);
+
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_CFG2, 0xFF,
+ SD_CALCULATE_CRC7 | SD_CHECK_CRC16 |
+ SD_NO_WAIT_BUSY_END | SD_CHECK_CRC7 | SD_RSP_LEN_6);
+ if (trans_mode != SD_TM_AUTO_TUNING)
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD,
+ CARD_DATA_SOURCE, 0x01, PINGPONG_BUFFER);
+
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_TRANSFER,
+ 0xFF, trans_mode | SD_TRANSFER_START);
+ rtsx_pci_add_cmd(pcr, CHECK_REG_CMD, SD_TRANSFER,
+ SD_TRANSFER_END, SD_TRANSFER_END);
+
+ err = rtsx_pci_send_cmd(pcr, timeout);
+ if (err < 0) {
+ sd_print_debug_regs(host);
+ dev_dbg(sdmmc_dev(host),
+ "rtsx_pci_send_cmd fail (err = %d)\n", err);
+ return err;
+ }
+
+ if (buf && buf_len) {
+ err = rtsx_pci_read_ppbuf(pcr, buf, buf_len);
+ if (err < 0) {
+ dev_dbg(sdmmc_dev(host),
+ "rtsx_pci_read_ppbuf fail (err = %d)\n", err);
+ return err;
+ }
+ }
+
+ return 0;
+}
+
+static int sd_write_data(struct realtek_pci_sdmmc *host, u8 *cmd, u16 byte_cnt,
+ u8 *buf, int buf_len, int timeout)
+{
+ struct rtsx_pcr *pcr = host->pcr;
+ int err, i;
+ u8 trans_mode;
+
+ if (!buf)
+ buf_len = 0;
+
+ if (buf && buf_len) {
+ err = rtsx_pci_write_ppbuf(pcr, buf, buf_len);
+ if (err < 0) {
+ dev_dbg(sdmmc_dev(host),
+ "rtsx_pci_write_ppbuf fail (err = %d)\n", err);
+ return err;
+ }
+ }
+
+ trans_mode = cmd ? SD_TM_AUTO_WRITE_2 : SD_TM_AUTO_WRITE_3;
+ rtsx_pci_init_cmd(pcr);
+
+ if (cmd) {
+ dev_dbg(sdmmc_dev(host), "%s: SD/MMC CMD %d\n", __func__,
+ cmd[0] - 0x40);
+
+ for (i = 0; i < 5; i++)
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD,
+ SD_CMD0 + i, 0xFF, cmd[i]);
+ }
+
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_BYTE_CNT_L, 0xFF, (u8)byte_cnt);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_BYTE_CNT_H,
+ 0xFF, (u8)(byte_cnt >> 8));
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_BLOCK_CNT_L, 0xFF, 1);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_BLOCK_CNT_H, 0xFF, 0);
+
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_CFG2, 0xFF,
+ SD_CALCULATE_CRC7 | SD_CHECK_CRC16 |
+ SD_NO_WAIT_BUSY_END | SD_CHECK_CRC7 | SD_RSP_LEN_6);
+
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_TRANSFER, 0xFF,
+ trans_mode | SD_TRANSFER_START);
+ rtsx_pci_add_cmd(pcr, CHECK_REG_CMD, SD_TRANSFER,
+ SD_TRANSFER_END, SD_TRANSFER_END);
+
+ err = rtsx_pci_send_cmd(pcr, timeout);
+ if (err < 0) {
+ sd_print_debug_regs(host);
+ dev_dbg(sdmmc_dev(host),
+ "rtsx_pci_send_cmd fail (err = %d)\n", err);
+ return err;
+ }
+
+ return 0;
+}
+
+static void sd_send_cmd_get_rsp(struct realtek_pci_sdmmc *host,
+ struct mmc_command *cmd)
+{
+ struct rtsx_pcr *pcr = host->pcr;
+ u8 cmd_idx = (u8)cmd->opcode;
+ u32 arg = cmd->arg;
+ int err = 0;
+ int timeout = 100;
+ int i;
+ u8 *ptr;
+ int stat_idx = 0;
+ u8 rsp_type;
+ int rsp_len = 5;
+
+ dev_dbg(sdmmc_dev(host), "%s: SD/MMC CMD %d, arg = 0x%08x\n",
+ __func__, cmd_idx, arg);
+
+ /* Response type:
+ * R0
+ * R1, R5, R6, R7
+ * R1b
+ * R2
+ * R3, R4
+ */
+ switch (mmc_resp_type(cmd)) {
+ case MMC_RSP_NONE:
+ rsp_type = SD_RSP_TYPE_R0;
+ rsp_len = 0;
+ break;
+ case MMC_RSP_R1:
+ rsp_type = SD_RSP_TYPE_R1;
+ break;
+ case MMC_RSP_R1B:
+ rsp_type = SD_RSP_TYPE_R1b;
+ break;
+ case MMC_RSP_R2:
+ rsp_type = SD_RSP_TYPE_R2;
+ rsp_len = 16;
+ break;
+ case MMC_RSP_R3:
+ rsp_type = SD_RSP_TYPE_R3;
+ break;
+ default:
+ dev_dbg(sdmmc_dev(host), "cmd->flag is not valid\n");
+ err = -EINVAL;
+ goto out;
+ }
+
+ if (rsp_type == SD_RSP_TYPE_R1b)
+ timeout = 3000;
+
+ if (cmd->opcode == SD_SWITCH_VOLTAGE) {
+ err = rtsx_pci_write_register(pcr, SD_BUS_STAT,
+ 0xFF, SD_CLK_TOGGLE_EN);
+ if (err < 0)
+ goto out;
+ }
+
+ rtsx_pci_init_cmd(pcr);
+
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_CMD0, 0xFF, 0x40 | cmd_idx);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_CMD1, 0xFF, (u8)(arg >> 24));
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_CMD2, 0xFF, (u8)(arg >> 16));
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_CMD3, 0xFF, (u8)(arg >> 8));
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_CMD4, 0xFF, (u8)arg);
+
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_CFG2, 0xFF, rsp_type);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_DATA_SOURCE,
+ 0x01, PINGPONG_BUFFER);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_TRANSFER,
+ 0xFF, SD_TM_CMD_RSP | SD_TRANSFER_START);
+ rtsx_pci_add_cmd(pcr, CHECK_REG_CMD, SD_TRANSFER,
+ SD_TRANSFER_END | SD_STAT_IDLE,
+ SD_TRANSFER_END | SD_STAT_IDLE);
+
+ if (rsp_type == SD_RSP_TYPE_R2) {
+ /* Read data from ping-pong buffer */
+ for (i = PPBUF_BASE2; i < PPBUF_BASE2 + 16; i++)
+ rtsx_pci_add_cmd(pcr, READ_REG_CMD, (u16)i, 0, 0);
+ stat_idx = 16;
+ } else if (rsp_type != SD_RSP_TYPE_R0) {
+ /* Read data from SD_CMDx registers */
+ for (i = SD_CMD0; i <= SD_CMD4; i++)
+ rtsx_pci_add_cmd(pcr, READ_REG_CMD, (u16)i, 0, 0);
+ stat_idx = 5;
+ }
+
+ rtsx_pci_add_cmd(pcr, READ_REG_CMD, SD_STAT1, 0, 0);
+
+ err = rtsx_pci_send_cmd(pcr, timeout);
+ if (err < 0) {
+ sd_print_debug_regs(host);
+ sd_clear_error(host);
+ dev_dbg(sdmmc_dev(host),
+ "rtsx_pci_send_cmd error (err = %d)\n", err);
+ goto out;
+ }
+
+ if (rsp_type == SD_RSP_TYPE_R0) {
+ err = 0;
+ goto out;
+ }
+
+ /* Eliminate returned value of CHECK_REG_CMD */
+ ptr = rtsx_pci_get_cmd_data(pcr) + 1;
+
+ /* Check (Start,Transmission) bit of Response */
+ if ((ptr[0] & 0xC0) != 0) {
+ err = -EILSEQ;
+ dev_dbg(sdmmc_dev(host), "Invalid response bit\n");
+ goto out;
+ }
+
+ /* Check CRC7 */
+ if (!(rsp_type & SD_NO_CHECK_CRC7)) {
+ if (ptr[stat_idx] & SD_CRC7_ERR) {
+ err = -EILSEQ;
+ dev_dbg(sdmmc_dev(host), "CRC7 error\n");
+ goto out;
+ }
+ }
+
+ if (rsp_type == SD_RSP_TYPE_R2) {
+ for (i = 0; i < 4; i++) {
+ cmd->resp[i] = get_unaligned_be32(ptr + 1 + i * 4);
+ dev_dbg(sdmmc_dev(host), "cmd->resp[%d] = 0x%08x\n",
+ i, cmd->resp[i]);
+ }
+ } else {
+ cmd->resp[0] = get_unaligned_be32(ptr + 1);
+ dev_dbg(sdmmc_dev(host), "cmd->resp[0] = 0x%08x\n",
+ cmd->resp[0]);
+ }
+
+out:
+ cmd->error = err;
+}
+
+static int sd_rw_multi(struct realtek_pci_sdmmc *host, struct mmc_request *mrq)
+{
+ struct rtsx_pcr *pcr = host->pcr;
+ struct mmc_host *mmc = host->mmc;
+ struct mmc_card *card = mmc->card;
+ struct mmc_data *data = mrq->data;
+ int uhs = mmc_sd_card_uhs(card);
+ int read = (data->flags & MMC_DATA_READ) ? 1 : 0;
+ u8 cfg2, trans_mode;
+ int err;
+ size_t data_len = data->blksz * data->blocks;
+
+ if (read) {
+ cfg2 = SD_CALCULATE_CRC7 | SD_CHECK_CRC16 |
+ SD_NO_WAIT_BUSY_END | SD_CHECK_CRC7 | SD_RSP_LEN_0;
+ trans_mode = SD_TM_AUTO_READ_3;
+ } else {
+ cfg2 = SD_NO_CALCULATE_CRC7 | SD_CHECK_CRC16 |
+ SD_NO_WAIT_BUSY_END | SD_NO_CHECK_CRC7 | SD_RSP_LEN_0;
+ trans_mode = SD_TM_AUTO_WRITE_3;
+ }
+
+ if (!uhs)
+ cfg2 |= SD_NO_CHECK_WAIT_CRC_TO;
+
+ rtsx_pci_init_cmd(pcr);
+
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_BYTE_CNT_L, 0xFF, 0x00);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_BYTE_CNT_H, 0xFF, 0x02);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_BLOCK_CNT_L,
+ 0xFF, (u8)data->blocks);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_BLOCK_CNT_H,
+ 0xFF, (u8)(data->blocks >> 8));
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD,
+ CARD_DATA_SOURCE, 0x01, RING_BUFFER);
+
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, IRQSTAT0,
+ DMA_DONE_INT, DMA_DONE_INT);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, DMATC3,
+ 0xFF, (u8)(data_len >> 24));
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, DMATC2,
+ 0xFF, (u8)(data_len >> 16));
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, DMATC1,
+ 0xFF, (u8)(data_len >> 8));
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, DMATC0, 0xFF, (u8)data_len);
+ if (read) {
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, DMACTL,
+ 0x03 | DMA_PACK_SIZE_MASK,
+ DMA_DIR_FROM_CARD | DMA_EN | DMA_512);
+ } else {
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, DMACTL,
+ 0x03 | DMA_PACK_SIZE_MASK,
+ DMA_DIR_TO_CARD | DMA_EN | DMA_512);
+ }
+
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_DATA_SOURCE,
+ 0x01, RING_BUFFER);
+
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_TRANSFER, 0xFF,
+ trans_mode | SD_TRANSFER_START);
+ rtsx_pci_add_cmd(pcr, CHECK_REG_CMD, SD_TRANSFER,
+ SD_TRANSFER_END, SD_TRANSFER_END);
+
+ rtsx_pci_send_cmd_no_wait(pcr);
+
+ err = rtsx_pci_transfer_data(pcr, data->sg, data->sg_len, read, 10000);
+ if (err < 0) {
+ sd_clear_error(host);
+ return err;
+ }
+
+ return 0;
+}
+
+static inline void sd_enable_initial_mode(struct realtek_pci_sdmmc *host)
+{
+ rtsx_pci_write_register(host->pcr, SD_CFG1,
+ SD_CLK_DIVIDE_MASK, SD_CLK_DIVIDE_128);
+}
+
+static inline void sd_disable_initial_mode(struct realtek_pci_sdmmc *host)
+{
+ rtsx_pci_write_register(host->pcr, SD_CFG1,
+ SD_CLK_DIVIDE_MASK, SD_CLK_DIVIDE_0);
+}
+
+static void sd_normal_rw(struct realtek_pci_sdmmc *host,
+ struct mmc_request *mrq)
+{
+ struct mmc_command *cmd = mrq->cmd;
+ struct mmc_data *data = mrq->data;
+ u8 _cmd[5], *buf;
+
+ _cmd[0] = 0x40 | (u8)cmd->opcode;
+ put_unaligned_be32(cmd->arg, (u32 *)(&_cmd[1]));
+
+ buf = kzalloc(data->blksz, GFP_NOIO);
+ if (!buf) {
+ cmd->error = -ENOMEM;
+ return;
+ }
+
+ if (data->flags & MMC_DATA_READ) {
+ if (host->initial_mode)
+ sd_disable_initial_mode(host);
+
+ cmd->error = sd_read_data(host, _cmd, (u16)data->blksz, buf,
+ data->blksz, 200);
+
+ if (host->initial_mode)
+ sd_enable_initial_mode(host);
+
+ sg_copy_from_buffer(data->sg, data->sg_len, buf, data->blksz);
+ } else {
+ sg_copy_to_buffer(data->sg, data->sg_len, buf, data->blksz);
+
+ cmd->error = sd_write_data(host, _cmd, (u16)data->blksz, buf,
+ data->blksz, 200);
+ }
+
+ kfree(buf);
+}
+
+static int sd_change_phase(struct realtek_pci_sdmmc *host, u8 sample_point)
+{
+ struct rtsx_pcr *pcr = host->pcr;
+ int err;
+
+ dev_dbg(sdmmc_dev(host), "%s: sample_point = %d\n",
+ __func__, sample_point);
+
+ rtsx_pci_init_cmd(pcr);
+
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CLK_CTL, CHANGE_CLK, CHANGE_CLK);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_VPRX_CTL, 0x1F, sample_point);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_VPCLK0_CTL, PHASE_NOT_RESET, 0);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_VPCLK0_CTL,
+ PHASE_NOT_RESET, PHASE_NOT_RESET);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CLK_CTL, CHANGE_CLK, 0);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_CFG1, SD_ASYNC_FIFO_NOT_RST, 0);
+
+ err = rtsx_pci_send_cmd(pcr, 100);
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+
+static u8 sd_search_final_phase(struct realtek_pci_sdmmc *host, u32 phase_map)
+{
+ struct timing_phase_path path[MAX_PHASE + 1];
+ int i, j, cont_path_cnt;
+ int new_block, max_len, final_path_idx;
+ u8 final_phase = 0xFF;
+
+ /* Parse phase_map, take it as a bit-ring */
+ cont_path_cnt = 0;
+ new_block = 1;
+ j = 0;
+ for (i = 0; i < MAX_PHASE + 1; i++) {
+ if (phase_map & (1 << i)) {
+ if (new_block) {
+ new_block = 0;
+ j = cont_path_cnt++;
+ path[j].start = i;
+ path[j].end = i;
+ } else {
+ path[j].end = i;
+ }
+ } else {
+ new_block = 1;
+ if (cont_path_cnt) {
+ /* Calculate path length and middle point */
+ int idx = cont_path_cnt - 1;
+ path[idx].len =
+ path[idx].end - path[idx].start + 1;
+ path[idx].mid =
+ path[idx].start + path[idx].len / 2;
+ }
+ }
+ }
+
+ if (cont_path_cnt == 0) {
+ dev_dbg(sdmmc_dev(host), "No continuous phase path\n");
+ goto finish;
+ } else {
+ /* Calculate last continuous path length and middle point */
+ int idx = cont_path_cnt - 1;
+ path[idx].len = path[idx].end - path[idx].start + 1;
+ path[idx].mid = path[idx].start + path[idx].len / 2;
+ }
+
+ /* Connect the first and last continuous paths if they are adjacent */
+ if (!path[0].start && (path[cont_path_cnt - 1].end == MAX_PHASE)) {
+ /* Using negative index */
+ path[0].start = path[cont_path_cnt - 1].start - MAX_PHASE - 1;
+ path[0].len += path[cont_path_cnt - 1].len;
+ path[0].mid = path[0].start + path[0].len / 2;
+ /* Convert negative middle point index to positive one */
+ if (path[0].mid < 0)
+ path[0].mid += MAX_PHASE + 1;
+ cont_path_cnt--;
+ }
+
+ /* Choose the longest continuous phase path */
+ max_len = 0;
+ final_phase = 0;
+ final_path_idx = 0;
+ for (i = 0; i < cont_path_cnt; i++) {
+ if (path[i].len > max_len) {
+ max_len = path[i].len;
+ final_phase = (u8)path[i].mid;
+ final_path_idx = i;
+ }
+
+ dev_dbg(sdmmc_dev(host), "path[%d].start = %d\n",
+ i, path[i].start);
+ dev_dbg(sdmmc_dev(host), "path[%d].end = %d\n",
+ i, path[i].end);
+ dev_dbg(sdmmc_dev(host), "path[%d].len = %d\n",
+ i, path[i].len);
+ dev_dbg(sdmmc_dev(host), "path[%d].mid = %d\n",
+ i, path[i].mid);
+ }
+
+finish:
+ dev_dbg(sdmmc_dev(host), "Final chosen phase: %d\n", final_phase);
+ return final_phase;
+}
+
+static void sd_wait_data_idle(struct realtek_pci_sdmmc *host)
+{
+ int err, i;
+ u8 val = 0;
+
+ for (i = 0; i < 100; i++) {
+ err = rtsx_pci_read_register(host->pcr, SD_DATA_STATE, &val);
+ if (val & SD_DATA_IDLE)
+ return;
+
+ udelay(100);
+ }
+}
+
+static int sd_tuning_rx_cmd(struct realtek_pci_sdmmc *host,
+ u8 opcode, u8 sample_point)
+{
+ int err;
+ u8 cmd[5] = {0};
+
+ err = sd_change_phase(host, sample_point);
+ if (err < 0)
+ return err;
+
+ cmd[0] = 0x40 | opcode;
+ err = sd_read_data(host, cmd, 0x40, NULL, 0, 100);
+ if (err < 0) {
+ /* Wait till SD DATA IDLE */
+ sd_wait_data_idle(host);
+ sd_clear_error(host);
+ return err;
+ }
+
+ return 0;
+}
+
+static int sd_tuning_phase(struct realtek_pci_sdmmc *host,
+ u8 opcode, u32 *phase_map)
+{
+ int err, i;
+ u32 raw_phase_map = 0;
+
+ for (i = MAX_PHASE; i >= 0; i--) {
+ err = sd_tuning_rx_cmd(host, opcode, (u8)i);
+ if (err == 0)
+ raw_phase_map |= 1 << i;
+ }
+
+ if (phase_map)
+ *phase_map = raw_phase_map;
+
+ return 0;
+}
+
+static int sd_tuning_rx(struct realtek_pci_sdmmc *host, u8 opcode)
+{
+ int err, i;
+ u32 raw_phase_map[RX_TUNING_CNT] = {0}, phase_map;
+ u8 final_phase;
+
+ for (i = 0; i < RX_TUNING_CNT; i++) {
+ err = sd_tuning_phase(host, opcode, &(raw_phase_map[i]));
+ if (err < 0)
+ return err;
+
+ if (raw_phase_map[i] == 0)
+ break;
+ }
+
+ phase_map = 0xFFFFFFFF;
+ for (i = 0; i < RX_TUNING_CNT; i++) {
+ dev_dbg(sdmmc_dev(host), "RX raw_phase_map[%d] = 0x%08x\n",
+ i, raw_phase_map[i]);
+ phase_map &= raw_phase_map[i];
+ }
+ dev_dbg(sdmmc_dev(host), "RX phase_map = 0x%08x\n", phase_map);
+
+ if (phase_map) {
+ final_phase = sd_search_final_phase(host, phase_map);
+ if (final_phase == 0xFF)
+ return -EINVAL;
+
+ err = sd_change_phase(host, final_phase);
+ if (err < 0)
+ return err;
+ } else {
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static void sdmmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+ struct realtek_pci_sdmmc *host = mmc_priv(mmc);
+ struct rtsx_pcr *pcr = host->pcr;
+ struct mmc_command *cmd = mrq->cmd;
+ struct mmc_data *data = mrq->data;
+ unsigned int data_size = 0;
+
+ if (host->eject) {
+ cmd->error = -ENOMEDIUM;
+ goto finish;
+ }
+
+ mutex_lock(&pcr->pcr_mutex);
+
+ rtsx_pci_start_run(pcr);
+
+ rtsx_pci_switch_clock(pcr, host->clock, host->ssc_depth,
+ host->initial_mode, host->double_clk, host->vpclk);
+ rtsx_pci_write_register(pcr, CARD_SELECT, 0x07, SD_MOD_SEL);
+ rtsx_pci_write_register(pcr, CARD_SHARE_MODE,
+ CARD_SHARE_MASK, CARD_SHARE_48_SD);
+
+ mutex_lock(&host->host_mutex);
+ host->mrq = mrq;
+ mutex_unlock(&host->host_mutex);
+
+ if (mrq->data)
+ data_size = data->blocks * data->blksz;
+
+ if (!data_size || mmc_op_multi(cmd->opcode) ||
+ (cmd->opcode == MMC_READ_SINGLE_BLOCK) ||
+ (cmd->opcode == MMC_WRITE_BLOCK)) {
+ sd_send_cmd_get_rsp(host, cmd);
+
+ if (!cmd->error && data_size) {
+ sd_rw_multi(host, mrq);
+
+ if (mmc_op_multi(cmd->opcode) && mrq->stop)
+ sd_send_cmd_get_rsp(host, mrq->stop);
+ }
+ } else {
+ sd_normal_rw(host, mrq);
+ }
+
+ if (mrq->data) {
+ if (cmd->error || data->error)
+ data->bytes_xfered = 0;
+ else
+ data->bytes_xfered = data->blocks * data->blksz;
+ }
+
+ mutex_unlock(&pcr->pcr_mutex);
+
+finish:
+ if (cmd->error)
+ dev_dbg(sdmmc_dev(host), "cmd->error = %d\n", cmd->error);
+
+ mutex_lock(&host->host_mutex);
+ host->mrq = NULL;
+ mutex_unlock(&host->host_mutex);
+
+ mmc_request_done(mmc, mrq);
+}
+
+static int sd_set_bus_width(struct realtek_pci_sdmmc *host,
+ unsigned char bus_width)
+{
+ int err = 0;
+ u8 width[] = {
+ [MMC_BUS_WIDTH_1] = SD_BUS_WIDTH_1BIT,
+ [MMC_BUS_WIDTH_4] = SD_BUS_WIDTH_4BIT,
+ [MMC_BUS_WIDTH_8] = SD_BUS_WIDTH_8BIT,
+ };
+
+ if (bus_width <= MMC_BUS_WIDTH_8)
+ err = rtsx_pci_write_register(host->pcr, SD_CFG1,
+ 0x03, width[bus_width]);
+
+ return err;
+}
+
+static int sd_power_on(struct realtek_pci_sdmmc *host)
+{
+ struct rtsx_pcr *pcr = host->pcr;
+ int err;
+
+ rtsx_pci_init_cmd(pcr);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_SELECT, 0x07, SD_MOD_SEL);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_SHARE_MODE,
+ CARD_SHARE_MASK, CARD_SHARE_48_SD);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_CLK_EN,
+ SD_CLK_EN, SD_CLK_EN);
+ err = rtsx_pci_send_cmd(pcr, 100);
+ if (err < 0)
+ return err;
+
+ err = rtsx_pci_card_pull_ctl_enable(pcr, RTSX_SD_CARD);
+ if (err < 0)
+ return err;
+
+ err = rtsx_pci_card_power_on(pcr, RTSX_SD_CARD);
+ if (err < 0)
+ return err;
+
+ err = rtsx_pci_write_register(pcr, CARD_OE, SD_OUTPUT_EN, SD_OUTPUT_EN);
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+
+static int sd_power_off(struct realtek_pci_sdmmc *host)
+{
+ struct rtsx_pcr *pcr = host->pcr;
+ int err;
+
+ rtsx_pci_init_cmd(pcr);
+
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_CLK_EN, SD_CLK_EN, 0);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_OE, SD_OUTPUT_EN, 0);
+
+ err = rtsx_pci_send_cmd(pcr, 100);
+ if (err < 0)
+ return err;
+
+ err = rtsx_pci_card_power_off(pcr, RTSX_SD_CARD);
+ if (err < 0)
+ return err;
+
+ return rtsx_pci_card_pull_ctl_disable(pcr, RTSX_SD_CARD);
+}
+
+static int sd_set_power_mode(struct realtek_pci_sdmmc *host,
+ unsigned char power_mode)
+{
+ int err;
+
+ if (power_mode == MMC_POWER_OFF)
+ err = sd_power_off(host);
+ else
+ err = sd_power_on(host);
+
+ return err;
+}
+
+static int sd_set_timing(struct realtek_pci_sdmmc *host,
+ unsigned char timing, bool *ddr_mode)
+{
+ struct rtsx_pcr *pcr = host->pcr;
+ int err = 0;
+
+ *ddr_mode = false;
+
+ rtsx_pci_init_cmd(pcr);
+
+ switch (timing) {
+ case MMC_TIMING_UHS_SDR104:
+ case MMC_TIMING_UHS_SDR50:
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_CFG1,
+ 0x0C | SD_ASYNC_FIFO_NOT_RST,
+ SD_30_MODE | SD_ASYNC_FIFO_NOT_RST);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CLK_CTL,
+ CLK_LOW_FREQ, CLK_LOW_FREQ);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_CLK_SOURCE, 0xFF,
+ CRC_VAR_CLK0 | SD30_FIX_CLK | SAMPLE_VAR_CLK1);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CLK_CTL, CLK_LOW_FREQ, 0);
+ break;
+
+ case MMC_TIMING_UHS_DDR50:
+ *ddr_mode = true;
+
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_CFG1,
+ 0x0C | SD_ASYNC_FIFO_NOT_RST,
+ SD_DDR_MODE | SD_ASYNC_FIFO_NOT_RST);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CLK_CTL,
+ CLK_LOW_FREQ, CLK_LOW_FREQ);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_CLK_SOURCE, 0xFF,
+ CRC_VAR_CLK0 | SD30_FIX_CLK | SAMPLE_VAR_CLK1);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CLK_CTL, CLK_LOW_FREQ, 0);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_PUSH_POINT_CTL,
+ DDR_VAR_TX_CMD_DAT, DDR_VAR_TX_CMD_DAT);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_SAMPLE_POINT_CTL,
+ DDR_VAR_RX_DAT | DDR_VAR_RX_CMD,
+ DDR_VAR_RX_DAT | DDR_VAR_RX_CMD);
+ break;
+
+ case MMC_TIMING_MMC_HS:
+ case MMC_TIMING_SD_HS:
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_CFG1,
+ 0x0C, SD_20_MODE);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CLK_CTL,
+ CLK_LOW_FREQ, CLK_LOW_FREQ);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_CLK_SOURCE, 0xFF,
+ CRC_FIX_CLK | SD30_VAR_CLK0 | SAMPLE_VAR_CLK1);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CLK_CTL, CLK_LOW_FREQ, 0);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_PUSH_POINT_CTL,
+ SD20_TX_SEL_MASK, SD20_TX_14_AHEAD);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_SAMPLE_POINT_CTL,
+ SD20_RX_SEL_MASK, SD20_RX_14_DELAY);
+ break;
+
+ default:
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD,
+ SD_CFG1, 0x0C, SD_20_MODE);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CLK_CTL,
+ CLK_LOW_FREQ, CLK_LOW_FREQ);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_CLK_SOURCE, 0xFF,
+ CRC_FIX_CLK | SD30_VAR_CLK0 | SAMPLE_VAR_CLK1);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CLK_CTL, CLK_LOW_FREQ, 0);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD,
+ SD_PUSH_POINT_CTL, 0xFF, 0);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_SAMPLE_POINT_CTL,
+ SD20_RX_SEL_MASK, SD20_RX_POS_EDGE);
+ break;
+ }
+
+ err = rtsx_pci_send_cmd(pcr, 100);
+
+ return err;
+}
+
+static void sdmmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+ struct realtek_pci_sdmmc *host = mmc_priv(mmc);
+ struct rtsx_pcr *pcr = host->pcr;
+
+ if (host->eject)
+ return;
+
+ mutex_lock(&pcr->pcr_mutex);
+
+ rtsx_pci_start_run(pcr);
+
+ sd_set_bus_width(host, ios->bus_width);
+ sd_set_power_mode(host, ios->power_mode);
+ sd_set_timing(host, ios->timing, &host->ddr_mode);
+
+ host->vpclk = false;
+ host->double_clk = true;
+
+ switch (ios->timing) {
+ case MMC_TIMING_UHS_SDR104:
+ case MMC_TIMING_UHS_SDR50:
+ host->ssc_depth = RTSX_SSC_DEPTH_2M;
+ host->vpclk = true;
+ host->double_clk = false;
+ break;
+ case MMC_TIMING_UHS_DDR50:
+ case MMC_TIMING_UHS_SDR25:
+ host->ssc_depth = RTSX_SSC_DEPTH_1M;
+ break;
+ default:
+ host->ssc_depth = RTSX_SSC_DEPTH_500K;
+ break;
+ }
+
+ host->initial_mode = (ios->clock <= 1000000) ? true : false;
+
+ host->clock = ios->clock;
+ rtsx_pci_switch_clock(pcr, ios->clock, host->ssc_depth,
+ host->initial_mode, host->double_clk, host->vpclk);
+
+ mutex_unlock(&pcr->pcr_mutex);
+}
+
+static int sdmmc_get_ro(struct mmc_host *mmc)
+{
+ struct realtek_pci_sdmmc *host = mmc_priv(mmc);
+ struct rtsx_pcr *pcr = host->pcr;
+ int ro = 0;
+ u32 val;
+
+ if (host->eject)
+ return -ENOMEDIUM;
+
+ mutex_lock(&pcr->pcr_mutex);
+
+ rtsx_pci_start_run(pcr);
+
+ /* Check SD mechanical write-protect switch */
+ val = rtsx_pci_readl(pcr, RTSX_BIPR);
+ dev_dbg(sdmmc_dev(host), "%s: RTSX_BIPR = 0x%08x\n", __func__, val);
+ if (val & SD_WRITE_PROTECT)
+ ro = 1;
+
+ mutex_unlock(&pcr->pcr_mutex);
+
+ return ro;
+}
+
+static int sdmmc_get_cd(struct mmc_host *mmc)
+{
+ struct realtek_pci_sdmmc *host = mmc_priv(mmc);
+ struct rtsx_pcr *pcr = host->pcr;
+ int cd = 0;
+ u32 val;
+
+ if (host->eject)
+ return -ENOMEDIUM;
+
+ mutex_lock(&pcr->pcr_mutex);
+
+ rtsx_pci_start_run(pcr);
+
+ /* Check SD card detect */
+ val = rtsx_pci_card_exist(pcr);
+ dev_dbg(sdmmc_dev(host), "%s: RTSX_BIPR = 0x%08x\n", __func__, val);
+ if (val & SD_EXIST)
+ cd = 1;
+
+ mutex_unlock(&pcr->pcr_mutex);
+
+ return cd;
+}
+
+static int sd_wait_voltage_stable_1(struct realtek_pci_sdmmc *host)
+{
+ struct rtsx_pcr *pcr = host->pcr;
+ int err;
+ u8 stat;
+
+ /* Reference to Signal Voltage Switch Sequence in SD spec.
+ * Wait for a period of time so that the card can drive SD_CMD and
+ * SD_DAT[3:0] to low after sending back CMD11 response.
+ */
+ mdelay(1);
+
+ /* SD_CMD, SD_DAT[3:0] should be driven to low by card;
+ * If either one of SD_CMD,SD_DAT[3:0] is not low,
+ * abort the voltage switch sequence;
+ */
+ err = rtsx_pci_read_register(pcr, SD_BUS_STAT, &stat);
+ if (err < 0)
+ return err;
+
+ if (stat & (SD_CMD_STATUS | SD_DAT3_STATUS | SD_DAT2_STATUS |
+ SD_DAT1_STATUS | SD_DAT0_STATUS))
+ return -EINVAL;
+
+ /* Stop toggle SD clock */
+ err = rtsx_pci_write_register(pcr, SD_BUS_STAT,
+ 0xFF, SD_CLK_FORCE_STOP);
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+
+static int sd_wait_voltage_stable_2(struct realtek_pci_sdmmc *host)
+{
+ struct rtsx_pcr *pcr = host->pcr;
+ int err;
+ u8 stat, mask, val;
+
+ /* Wait 1.8V output of voltage regulator in card stable */
+ msleep(50);
+
+ /* Toggle SD clock again */
+ err = rtsx_pci_write_register(pcr, SD_BUS_STAT, 0xFF, SD_CLK_TOGGLE_EN);
+ if (err < 0)
+ return err;
+
+ /* Wait for a period of time so that the card can drive
+ * SD_DAT[3:0] to high at 1.8V
+ */
+ msleep(20);
+
+ /* SD_CMD, SD_DAT[3:0] should be pulled high by host */
+ err = rtsx_pci_read_register(pcr, SD_BUS_STAT, &stat);
+ if (err < 0)
+ return err;
+
+ mask = SD_CMD_STATUS | SD_DAT3_STATUS | SD_DAT2_STATUS |
+ SD_DAT1_STATUS | SD_DAT0_STATUS;
+ val = SD_CMD_STATUS | SD_DAT3_STATUS | SD_DAT2_STATUS |
+ SD_DAT1_STATUS | SD_DAT0_STATUS;
+ if ((stat & mask) != val) {
+ dev_dbg(sdmmc_dev(host),
+ "%s: SD_BUS_STAT = 0x%x\n", __func__, stat);
+ rtsx_pci_write_register(pcr, SD_BUS_STAT,
+ SD_CLK_TOGGLE_EN | SD_CLK_FORCE_STOP, 0);
+ rtsx_pci_write_register(pcr, CARD_CLK_EN, 0xFF, 0);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int sd_change_bank_voltage(struct realtek_pci_sdmmc *host, u8 voltage)
+{
+ struct rtsx_pcr *pcr = host->pcr;
+ int err;
+
+ if (voltage == SD_IO_3V3) {
+ err = rtsx_pci_write_phy_register(pcr, 0x08, 0x4FC0 | 0x24);
+ if (err < 0)
+ return err;
+ } else if (voltage == SD_IO_1V8) {
+ err = rtsx_pci_write_phy_register(pcr, 0x08, 0x4C40 | 0x24);
+ if (err < 0)
+ return err;
+ } else {
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int sdmmc_switch_voltage(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+ struct realtek_pci_sdmmc *host = mmc_priv(mmc);
+ struct rtsx_pcr *pcr = host->pcr;
+ int err = 0;
+ u8 voltage;
+
+ dev_dbg(sdmmc_dev(host), "%s: signal_voltage = %d\n",
+ __func__, ios->signal_voltage);
+
+ if (host->eject)
+ return -ENOMEDIUM;
+
+ mutex_lock(&pcr->pcr_mutex);
+
+ rtsx_pci_start_run(pcr);
+
+ if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_330)
+ voltage = SD_IO_3V3;
+ else
+ voltage = SD_IO_1V8;
+
+ if (voltage == SD_IO_1V8) {
+ err = rtsx_pci_write_register(pcr,
+ SD30_DRIVE_SEL, 0x07, DRIVER_TYPE_B);
+ if (err < 0)
+ goto out;
+
+ err = sd_wait_voltage_stable_1(host);
+ if (err < 0)
+ goto out;
+ }
+
+ err = sd_change_bank_voltage(host, voltage);
+ if (err < 0)
+ goto out;
+
+ if (voltage == SD_IO_1V8) {
+ err = sd_wait_voltage_stable_2(host);
+ if (err < 0)
+ goto out;
+ }
+
+ /* Stop toggle SD clock in idle */
+ err = rtsx_pci_write_register(pcr, SD_BUS_STAT,
+ SD_CLK_TOGGLE_EN | SD_CLK_FORCE_STOP, 0);
+
+out:
+ mutex_unlock(&pcr->pcr_mutex);
+
+ return err;
+}
+
+static int sdmmc_execute_tuning(struct mmc_host *mmc, u32 opcode)
+{
+ struct realtek_pci_sdmmc *host = mmc_priv(mmc);
+ struct rtsx_pcr *pcr = host->pcr;
+ int err = 0;
+
+ if (host->eject)
+ return -ENOMEDIUM;
+
+ mutex_lock(&pcr->pcr_mutex);
+
+ rtsx_pci_start_run(pcr);
+
+ if (!host->ddr_mode)
+ err = sd_tuning_rx(host, MMC_SEND_TUNING_BLOCK);
+
+ mutex_unlock(&pcr->pcr_mutex);
+
+ return err;
+}
+
+static const struct mmc_host_ops realtek_pci_sdmmc_ops = {
+ .request = sdmmc_request,
+ .set_ios = sdmmc_set_ios,
+ .get_ro = sdmmc_get_ro,
+ .get_cd = sdmmc_get_cd,
+ .start_signal_voltage_switch = sdmmc_switch_voltage,
+ .execute_tuning = sdmmc_execute_tuning,
+};
+
+#ifdef CONFIG_PM
+static int rtsx_pci_sdmmc_suspend(struct platform_device *pdev,
+ pm_message_t state)
+{
+ struct realtek_pci_sdmmc *host = platform_get_drvdata(pdev);
+ struct mmc_host *mmc = host->mmc;
+ int err;
+
+ dev_dbg(sdmmc_dev(host), "--> %s\n", __func__);
+
+ err = mmc_suspend_host(mmc);
+ if (err)
+ return err;
+
+ return 0;
+}
+
+static int rtsx_pci_sdmmc_resume(struct platform_device *pdev)
+{
+ struct realtek_pci_sdmmc *host = platform_get_drvdata(pdev);
+ struct mmc_host *mmc = host->mmc;
+
+ dev_dbg(sdmmc_dev(host), "--> %s\n", __func__);
+
+ return mmc_resume_host(mmc);
+}
+#else /* CONFIG_PM */
+#define rtsx_pci_sdmmc_suspend NULL
+#define rtsx_pci_sdmmc_resume NULL
+#endif /* CONFIG_PM */
+
+static void init_extra_caps(struct realtek_pci_sdmmc *host)
+{
+ struct mmc_host *mmc = host->mmc;
+ struct rtsx_pcr *pcr = host->pcr;
+
+ dev_dbg(sdmmc_dev(host), "pcr->extra_caps = 0x%x\n", pcr->extra_caps);
+
+ if (pcr->extra_caps & EXTRA_CAPS_SD_SDR50)
+ mmc->caps |= MMC_CAP_UHS_SDR50;
+ if (pcr->extra_caps & EXTRA_CAPS_SD_SDR104)
+ mmc->caps |= MMC_CAP_UHS_SDR104;
+ if (pcr->extra_caps & EXTRA_CAPS_SD_DDR50)
+ mmc->caps |= MMC_CAP_UHS_DDR50;
+ if (pcr->extra_caps & EXTRA_CAPS_MMC_HSDDR)
+ mmc->caps |= MMC_CAP_1_8V_DDR;
+ if (pcr->extra_caps & EXTRA_CAPS_MMC_8BIT)
+ mmc->caps |= MMC_CAP_8_BIT_DATA;
+}
+
+static void realtek_init_host(struct realtek_pci_sdmmc *host)
+{
+ struct mmc_host *mmc = host->mmc;
+
+ mmc->f_min = 250000;
+ mmc->f_max = 208000000;
+ mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195;
+ mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SD_HIGHSPEED |
+ MMC_CAP_MMC_HIGHSPEED | MMC_CAP_BUS_WIDTH_TEST |
+ MMC_CAP_UHS_SDR12 | MMC_CAP_UHS_SDR25;
+ mmc->max_current_330 = 400;
+ mmc->max_current_180 = 800;
+ mmc->ops = &realtek_pci_sdmmc_ops;
+
+ init_extra_caps(host);
+
+ mmc->max_segs = 256;
+ mmc->max_seg_size = 65536;
+ mmc->max_blk_size = 512;
+ mmc->max_blk_count = 65535;
+ mmc->max_req_size = 524288;
+}
+
+static void rtsx_pci_sdmmc_card_event(struct platform_device *pdev)
+{
+ struct realtek_pci_sdmmc *host = platform_get_drvdata(pdev);
+
+ mmc_detect_change(host->mmc, 0);
+}
+
+static int rtsx_pci_sdmmc_drv_probe(struct platform_device *pdev)
+{
+ struct mmc_host *mmc;
+ struct realtek_pci_sdmmc *host;
+ struct rtsx_pcr *pcr;
+ struct pcr_handle *handle = pdev->dev.platform_data;
+
+ if (!handle)
+ return -ENXIO;
+
+ pcr = handle->pcr;
+ if (!pcr)
+ return -ENXIO;
+
+ dev_dbg(&(pdev->dev), ": Realtek PCI-E SDMMC controller found\n");
+
+ mmc = mmc_alloc_host(sizeof(*host), &pdev->dev);
+ if (!mmc)
+ return -ENOMEM;
+
+ host = mmc_priv(mmc);
+ host->pcr = pcr;
+ host->mmc = mmc;
+ host->pdev = pdev;
+ platform_set_drvdata(pdev, host);
+ pcr->slots[RTSX_SD_CARD].p_dev = pdev;
+ pcr->slots[RTSX_SD_CARD].card_event = rtsx_pci_sdmmc_card_event;
+
+ mutex_init(&host->host_mutex);
+
+ realtek_init_host(host);
+
+ mmc_add_host(mmc);
+
+ return 0;
+}
+
+static int rtsx_pci_sdmmc_drv_remove(struct platform_device *pdev)
+{
+ struct realtek_pci_sdmmc *host = platform_get_drvdata(pdev);
+ struct rtsx_pcr *pcr;
+ struct mmc_host *mmc;
+
+ if (!host)
+ return 0;
+
+ pcr = host->pcr;
+ pcr->slots[RTSX_SD_CARD].p_dev = NULL;
+ pcr->slots[RTSX_SD_CARD].card_event = NULL;
+ mmc = host->mmc;
+ host->eject = true;
+
+ mutex_lock(&host->host_mutex);
+ if (host->mrq) {
+ dev_dbg(&(pdev->dev),
+ "%s: Controller removed during transfer\n",
+ mmc_hostname(mmc));
+
+ rtsx_pci_complete_unfinished_transfer(pcr);
+
+ host->mrq->cmd->error = -ENOMEDIUM;
+ if (host->mrq->stop)
+ host->mrq->stop->error = -ENOMEDIUM;
+ mmc_request_done(mmc, host->mrq);
+ }
+ mutex_unlock(&host->host_mutex);
+
+ mmc_remove_host(mmc);
+ mmc_free_host(mmc);
+
+ platform_set_drvdata(pdev, NULL);
+
+ dev_dbg(&(pdev->dev),
+ ": Realtek PCI-E SDMMC controller has been removed\n");
+
+ return 0;
+}
+
+static struct platform_device_id rtsx_pci_sdmmc_ids[] = {
+ {
+ .name = DRV_NAME_RTSX_PCI_SDMMC,
+ }, {
+ /* sentinel */
+ }
+};
+MODULE_DEVICE_TABLE(platform, rtsx_pci_sdmmc_ids);
+
+static struct platform_driver rtsx_pci_sdmmc_driver = {
+ .probe = rtsx_pci_sdmmc_drv_probe,
+ .remove = rtsx_pci_sdmmc_drv_remove,
+ .id_table = rtsx_pci_sdmmc_ids,
+ .suspend = rtsx_pci_sdmmc_suspend,
+ .resume = rtsx_pci_sdmmc_resume,
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = DRV_NAME_RTSX_PCI_SDMMC,
+ },
+};
+module_platform_driver(rtsx_pci_sdmmc_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Wei WANG <wei_wang@realsil.com.cn>");
+MODULE_DESCRIPTION("Realtek PCI-E SD/MMC Card Host Driver");
diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c
index 4638dda..63fb265 100644
--- a/drivers/mmc/host/s3cmci.c
+++ b/drivers/mmc/host/s3cmci.c
@@ -1540,7 +1540,7 @@
#endif /* CONFIG_DEBUG_FS */
-static int __devinit s3cmci_probe(struct platform_device *pdev)
+static int s3cmci_probe(struct platform_device *pdev)
{
struct s3cmci_host *host;
struct mmc_host *mmc;
@@ -1819,7 +1819,7 @@
clk_disable(host->clk);
}
-static int __devexit s3cmci_remove(struct platform_device *pdev)
+static int s3cmci_remove(struct platform_device *pdev)
{
struct mmc_host *mmc = platform_get_drvdata(pdev);
struct s3cmci_host *host = mmc_priv(mmc);
@@ -1906,7 +1906,7 @@
},
.id_table = s3cmci_driver_ids,
.probe = s3cmci_probe,
- .remove = __devexit_p(s3cmci_remove),
+ .remove = s3cmci_remove,
.shutdown = s3cmci_shutdown,
};
diff --git a/drivers/mmc/host/sdhci-acpi.c b/drivers/mmc/host/sdhci-acpi.c
new file mode 100644
index 0000000..12b0a78
--- /dev/null
+++ b/drivers/mmc/host/sdhci-acpi.c
@@ -0,0 +1,312 @@
+/*
+ * Secure Digital Host Controller Interface ACPI driver.
+ *
+ * Copyright (c) 2012, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/export.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+#include <linux/dma-mapping.h>
+#include <linux/compiler.h>
+#include <linux/stddef.h>
+#include <linux/bitops.h>
+#include <linux/types.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/acpi.h>
+#include <linux/pm.h>
+#include <linux/pm_runtime.h>
+
+#include <linux/mmc/host.h>
+#include <linux/mmc/pm.h>
+#include <linux/mmc/sdhci.h>
+
+#include "sdhci.h"
+
+enum {
+ SDHCI_ACPI_SD_CD = BIT(0),
+ SDHCI_ACPI_RUNTIME_PM = BIT(1),
+};
+
+struct sdhci_acpi_chip {
+ const struct sdhci_ops *ops;
+ unsigned int quirks;
+ unsigned int quirks2;
+ unsigned long caps;
+ unsigned int caps2;
+ mmc_pm_flag_t pm_caps;
+};
+
+struct sdhci_acpi_slot {
+ const struct sdhci_acpi_chip *chip;
+ unsigned int quirks;
+ unsigned int quirks2;
+ unsigned long caps;
+ unsigned int caps2;
+ mmc_pm_flag_t pm_caps;
+ unsigned int flags;
+};
+
+struct sdhci_acpi_host {
+ struct sdhci_host *host;
+ const struct sdhci_acpi_slot *slot;
+ struct platform_device *pdev;
+ bool use_runtime_pm;
+};
+
+static inline bool sdhci_acpi_flag(struct sdhci_acpi_host *c, unsigned int flag)
+{
+ return c->slot && (c->slot->flags & flag);
+}
+
+static int sdhci_acpi_enable_dma(struct sdhci_host *host)
+{
+ return 0;
+}
+
+static const struct sdhci_ops sdhci_acpi_ops_dflt = {
+ .enable_dma = sdhci_acpi_enable_dma,
+};
+
+static const struct sdhci_acpi_slot sdhci_acpi_slot_int_sdio = {
+ .quirks2 = SDHCI_QUIRK2_HOST_OFF_CARD_ON,
+ .caps = MMC_CAP_NONREMOVABLE | MMC_CAP_POWER_OFF_CARD,
+ .flags = SDHCI_ACPI_RUNTIME_PM,
+ .pm_caps = MMC_PM_KEEP_POWER,
+};
+
+static const struct acpi_device_id sdhci_acpi_ids[] = {
+ { "INT33C6", (kernel_ulong_t)&sdhci_acpi_slot_int_sdio },
+ { "PNP0D40" },
+ { },
+};
+MODULE_DEVICE_TABLE(acpi, sdhci_acpi_ids);
+
+static const struct sdhci_acpi_slot *sdhci_acpi_get_slot(const char *hid)
+{
+ const struct acpi_device_id *id;
+
+ for (id = sdhci_acpi_ids; id->id[0]; id++)
+ if (!strcmp(id->id, hid))
+ return (const struct sdhci_acpi_slot *)id->driver_data;
+ return NULL;
+}
+
+static int __devinit sdhci_acpi_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ acpi_handle handle = ACPI_HANDLE(dev);
+ struct acpi_device *device;
+ struct sdhci_acpi_host *c;
+ struct sdhci_host *host;
+ struct resource *iomem;
+ resource_size_t len;
+ const char *hid;
+ int err;
+
+ if (acpi_bus_get_device(handle, &device))
+ return -ENODEV;
+
+ if (acpi_bus_get_status(device) || !device->status.present)
+ return -ENODEV;
+
+ hid = acpi_device_hid(device);
+
+ iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!iomem)
+ return -ENOMEM;
+
+ len = resource_size(iomem);
+ if (len < 0x100)
+ dev_err(dev, "Invalid iomem size!\n");
+
+ if (!devm_request_mem_region(dev, iomem->start, len, dev_name(dev)))
+ return -ENOMEM;
+
+ host = sdhci_alloc_host(dev, sizeof(struct sdhci_acpi_host));
+ if (IS_ERR(host))
+ return PTR_ERR(host);
+
+ c = sdhci_priv(host);
+ c->host = host;
+ c->slot = sdhci_acpi_get_slot(hid);
+ c->pdev = pdev;
+ c->use_runtime_pm = sdhci_acpi_flag(c, SDHCI_ACPI_RUNTIME_PM);
+
+ platform_set_drvdata(pdev, c);
+
+ host->hw_name = "ACPI";
+ host->ops = &sdhci_acpi_ops_dflt;
+ host->irq = platform_get_irq(pdev, 0);
+
+ host->ioaddr = devm_ioremap_nocache(dev, iomem->start,
+ resource_size(iomem));
+ if (host->ioaddr == NULL) {
+ err = -ENOMEM;
+ goto err_free;
+ }
+
+ if (!dev->dma_mask) {
+ u64 dma_mask;
+
+ if (sdhci_readl(host, SDHCI_CAPABILITIES) & SDHCI_CAN_64BIT) {
+ /* 64-bit DMA is not supported at present */
+ dma_mask = DMA_BIT_MASK(32);
+ } else {
+ dma_mask = DMA_BIT_MASK(32);
+ }
+
+ dev->dma_mask = &dev->coherent_dma_mask;
+ dev->coherent_dma_mask = dma_mask;
+ }
+
+ if (c->slot) {
+ if (c->slot->chip) {
+ host->ops = c->slot->chip->ops;
+ host->quirks |= c->slot->chip->quirks;
+ host->quirks2 |= c->slot->chip->quirks2;
+ host->mmc->caps |= c->slot->chip->caps;
+ host->mmc->caps2 |= c->slot->chip->caps2;
+ host->mmc->pm_caps |= c->slot->chip->pm_caps;
+ }
+ host->quirks |= c->slot->quirks;
+ host->quirks2 |= c->slot->quirks2;
+ host->mmc->caps |= c->slot->caps;
+ host->mmc->caps2 |= c->slot->caps2;
+ host->mmc->pm_caps |= c->slot->pm_caps;
+ }
+
+ err = sdhci_add_host(host);
+ if (err)
+ goto err_free;
+
+ if (c->use_runtime_pm) {
+ pm_suspend_ignore_children(dev, 1);
+ pm_runtime_set_autosuspend_delay(dev, 50);
+ pm_runtime_use_autosuspend(dev);
+ pm_runtime_enable(dev);
+ }
+
+ return 0;
+
+err_free:
+ platform_set_drvdata(pdev, NULL);
+ sdhci_free_host(c->host);
+ return err;
+}
+
+static int __devexit sdhci_acpi_remove(struct platform_device *pdev)
+{
+ struct sdhci_acpi_host *c = platform_get_drvdata(pdev);
+ struct device *dev = &pdev->dev;
+ int dead;
+
+ if (c->use_runtime_pm) {
+ pm_runtime_get_sync(dev);
+ pm_runtime_disable(dev);
+ pm_runtime_put_noidle(dev);
+ }
+
+ dead = (sdhci_readl(c->host, SDHCI_INT_STATUS) == ~0);
+ sdhci_remove_host(c->host, dead);
+ platform_set_drvdata(pdev, NULL);
+ sdhci_free_host(c->host);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+
+static int sdhci_acpi_suspend(struct device *dev)
+{
+ struct sdhci_acpi_host *c = dev_get_drvdata(dev);
+
+ return sdhci_suspend_host(c->host);
+}
+
+static int sdhci_acpi_resume(struct device *dev)
+{
+ struct sdhci_acpi_host *c = dev_get_drvdata(dev);
+
+ return sdhci_resume_host(c->host);
+}
+
+#else
+
+#define sdhci_acpi_suspend NULL
+#define sdhci_acpi_resume NULL
+
+#endif
+
+#ifdef CONFIG_PM_RUNTIME
+
+static int sdhci_acpi_runtime_suspend(struct device *dev)
+{
+ struct sdhci_acpi_host *c = dev_get_drvdata(dev);
+
+ return sdhci_runtime_suspend_host(c->host);
+}
+
+static int sdhci_acpi_runtime_resume(struct device *dev)
+{
+ struct sdhci_acpi_host *c = dev_get_drvdata(dev);
+
+ return sdhci_runtime_resume_host(c->host);
+}
+
+static int sdhci_acpi_runtime_idle(struct device *dev)
+{
+ return 0;
+}
+
+#else
+
+#define sdhci_acpi_runtime_suspend NULL
+#define sdhci_acpi_runtime_resume NULL
+#define sdhci_acpi_runtime_idle NULL
+
+#endif
+
+static const struct dev_pm_ops sdhci_acpi_pm_ops = {
+ .suspend = sdhci_acpi_suspend,
+ .resume = sdhci_acpi_resume,
+ .runtime_suspend = sdhci_acpi_runtime_suspend,
+ .runtime_resume = sdhci_acpi_runtime_resume,
+ .runtime_idle = sdhci_acpi_runtime_idle,
+};
+
+static struct platform_driver sdhci_acpi_driver = {
+ .driver = {
+ .name = "sdhci-acpi",
+ .owner = THIS_MODULE,
+ .acpi_match_table = sdhci_acpi_ids,
+ .pm = &sdhci_acpi_pm_ops,
+ },
+ .probe = sdhci_acpi_probe,
+ .remove = __devexit_p(sdhci_acpi_remove),
+};
+
+module_platform_driver(sdhci_acpi_driver);
+
+MODULE_DESCRIPTION("Secure Digital Host Controller Interface ACPI driver");
+MODULE_AUTHOR("Adrian Hunter");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/mmc/host/sdhci-cns3xxx.c b/drivers/mmc/host/sdhci-cns3xxx.c
index 28a8708..30bfdc4 100644
--- a/drivers/mmc/host/sdhci-cns3xxx.c
+++ b/drivers/mmc/host/sdhci-cns3xxx.c
@@ -95,12 +95,12 @@
SDHCI_QUIRK_NONSTANDARD_CLOCK,
};
-static int __devinit sdhci_cns3xxx_probe(struct platform_device *pdev)
+static int sdhci_cns3xxx_probe(struct platform_device *pdev)
{
return sdhci_pltfm_register(pdev, &sdhci_cns3xxx_pdata);
}
-static int __devexit sdhci_cns3xxx_remove(struct platform_device *pdev)
+static int sdhci_cns3xxx_remove(struct platform_device *pdev)
{
return sdhci_pltfm_unregister(pdev);
}
@@ -112,7 +112,7 @@
.pm = SDHCI_PLTFM_PMOPS,
},
.probe = sdhci_cns3xxx_probe,
- .remove = __devexit_p(sdhci_cns3xxx_remove),
+ .remove = sdhci_cns3xxx_remove,
};
module_platform_driver(sdhci_cns3xxx_driver);
diff --git a/drivers/mmc/host/sdhci-dove.c b/drivers/mmc/host/sdhci-dove.c
index e6214480..169fab9 100644
--- a/drivers/mmc/host/sdhci-dove.c
+++ b/drivers/mmc/host/sdhci-dove.c
@@ -97,7 +97,7 @@
SDHCI_QUIRK_NO_HISPD_BIT,
};
-static int __devinit sdhci_dove_probe(struct platform_device *pdev)
+static int sdhci_dove_probe(struct platform_device *pdev)
{
struct sdhci_host *host;
struct sdhci_pltfm_host *pltfm_host;
@@ -178,7 +178,7 @@
return ret;
}
-static int __devexit sdhci_dove_remove(struct platform_device *pdev)
+static int sdhci_dove_remove(struct platform_device *pdev)
{
struct sdhci_host *host = platform_get_drvdata(pdev);
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
@@ -197,7 +197,7 @@
return 0;
}
-static const struct of_device_id sdhci_dove_of_match_table[] __devinitdata = {
+static const struct of_device_id sdhci_dove_of_match_table[] = {
{ .compatible = "marvell,dove-sdhci", },
{}
};
@@ -211,7 +211,7 @@
.of_match_table = of_match_ptr(sdhci_dove_of_match_table),
},
.probe = sdhci_dove_probe,
- .remove = __devexit_p(sdhci_dove_remove),
+ .remove = sdhci_dove_remove,
};
module_platform_driver(sdhci_dove_driver);
diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
index 1849461..e07df81 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -403,7 +403,7 @@
};
#ifdef CONFIG_OF
-static int __devinit
+static int
sdhci_esdhc_imx_probe_dt(struct platform_device *pdev,
struct esdhc_platform_data *boarddata)
{
@@ -440,7 +440,7 @@
}
#endif
-static int __devinit sdhci_esdhc_imx_probe(struct platform_device *pdev)
+static int sdhci_esdhc_imx_probe(struct platform_device *pdev)
{
const struct of_device_id *of_id =
of_match_device(imx_esdhc_dt_ids, &pdev->dev);
@@ -590,7 +590,7 @@
return err;
}
-static int __devexit sdhci_esdhc_imx_remove(struct platform_device *pdev)
+static int sdhci_esdhc_imx_remove(struct platform_device *pdev)
{
struct sdhci_host *host = platform_get_drvdata(pdev);
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
@@ -617,7 +617,7 @@
},
.id_table = imx_esdhc_devtype,
.probe = sdhci_esdhc_imx_probe,
- .remove = __devexit_p(sdhci_esdhc_imx_remove),
+ .remove = sdhci_esdhc_imx_remove,
};
module_platform_driver(sdhci_esdhc_imx_driver);
diff --git a/drivers/mmc/host/sdhci-of-esdhc.c b/drivers/mmc/host/sdhci-of-esdhc.c
index 60de2ee..f32526d 100644
--- a/drivers/mmc/host/sdhci-of-esdhc.c
+++ b/drivers/mmc/host/sdhci-of-esdhc.c
@@ -260,12 +260,12 @@
.ops = &sdhci_esdhc_ops,
};
-static int __devinit sdhci_esdhc_probe(struct platform_device *pdev)
+static int sdhci_esdhc_probe(struct platform_device *pdev)
{
return sdhci_pltfm_register(pdev, &sdhci_esdhc_pdata);
}
-static int __devexit sdhci_esdhc_remove(struct platform_device *pdev)
+static int sdhci_esdhc_remove(struct platform_device *pdev)
{
return sdhci_pltfm_unregister(pdev);
}
@@ -286,7 +286,7 @@
.pm = SDHCI_PLTFM_PMOPS,
},
.probe = sdhci_esdhc_probe,
- .remove = __devexit_p(sdhci_esdhc_remove),
+ .remove = sdhci_esdhc_remove,
};
module_platform_driver(sdhci_esdhc_driver);
diff --git a/drivers/mmc/host/sdhci-of-hlwd.c b/drivers/mmc/host/sdhci-of-hlwd.c
index 0ce088a..c3d3715 100644
--- a/drivers/mmc/host/sdhci-of-hlwd.c
+++ b/drivers/mmc/host/sdhci-of-hlwd.c
@@ -66,12 +66,12 @@
.ops = &sdhci_hlwd_ops,
};
-static int __devinit sdhci_hlwd_probe(struct platform_device *pdev)
+static int sdhci_hlwd_probe(struct platform_device *pdev)
{
return sdhci_pltfm_register(pdev, &sdhci_hlwd_pdata);
}
-static int __devexit sdhci_hlwd_remove(struct platform_device *pdev)
+static int sdhci_hlwd_remove(struct platform_device *pdev)
{
return sdhci_pltfm_unregister(pdev);
}
@@ -90,7 +90,7 @@
.pm = SDHCI_PLTFM_PMOPS,
},
.probe = sdhci_hlwd_probe,
- .remove = __devexit_p(sdhci_hlwd_remove),
+ .remove = sdhci_hlwd_remove,
};
module_platform_driver(sdhci_hlwd_driver);
diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c
index 0777fad..c7dd0cb 100644
--- a/drivers/mmc/host/sdhci-pci.c
+++ b/drivers/mmc/host/sdhci-pci.c
@@ -654,7 +654,7 @@
.probe = via_probe,
};
-static const struct pci_device_id pci_ids[] __devinitconst = {
+static const struct pci_device_id pci_ids[] = {
{
.vendor = PCI_VENDOR_ID_RICOH,
.device = PCI_DEVICE_ID_RICOH_R5C822,
@@ -1184,7 +1184,7 @@
* *
\*****************************************************************************/
-static struct sdhci_pci_slot * __devinit sdhci_pci_probe_slot(
+static struct sdhci_pci_slot *sdhci_pci_probe_slot(
struct pci_dev *pdev, struct sdhci_pci_chip *chip, int first_bar,
int slotno)
{
@@ -1339,7 +1339,7 @@
sdhci_free_host(slot->host);
}
-static void __devinit sdhci_pci_runtime_pm_allow(struct device *dev)
+static void sdhci_pci_runtime_pm_allow(struct device *dev)
{
pm_runtime_put_noidle(dev);
pm_runtime_allow(dev);
@@ -1348,13 +1348,13 @@
pm_suspend_ignore_children(dev, 1);
}
-static void __devexit sdhci_pci_runtime_pm_forbid(struct device *dev)
+static void sdhci_pci_runtime_pm_forbid(struct device *dev)
{
pm_runtime_forbid(dev);
pm_runtime_get_noresume(dev);
}
-static int __devinit sdhci_pci_probe(struct pci_dev *pdev,
+static int sdhci_pci_probe(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
struct sdhci_pci_chip *chip;
@@ -1446,7 +1446,7 @@
return ret;
}
-static void __devexit sdhci_pci_remove(struct pci_dev *pdev)
+static void sdhci_pci_remove(struct pci_dev *pdev)
{
int i;
struct sdhci_pci_chip *chip;
@@ -1471,7 +1471,7 @@
.name = "sdhci-pci",
.id_table = pci_ids,
.probe = sdhci_pci_probe,
- .remove = __devexit_p(sdhci_pci_remove),
+ .remove = sdhci_pci_remove,
.driver = {
.pm = &sdhci_pci_pm_ops
},
diff --git a/drivers/mmc/host/sdhci-pxav2.c b/drivers/mmc/host/sdhci-pxav2.c
index 8e63a9c..ac854aa 100644
--- a/drivers/mmc/host/sdhci-pxav2.c
+++ b/drivers/mmc/host/sdhci-pxav2.c
@@ -166,7 +166,7 @@
}
#endif
-static int __devinit sdhci_pxav2_probe(struct platform_device *pdev)
+static int sdhci_pxav2_probe(struct platform_device *pdev)
{
struct sdhci_pltfm_host *pltfm_host;
struct sdhci_pxa_platdata *pdata = pdev->dev.platform_data;
@@ -247,7 +247,7 @@
return ret;
}
-static int __devexit sdhci_pxav2_remove(struct platform_device *pdev)
+static int sdhci_pxav2_remove(struct platform_device *pdev)
{
struct sdhci_host *host = platform_get_drvdata(pdev);
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
@@ -275,7 +275,7 @@
.pm = SDHCI_PLTFM_PMOPS,
},
.probe = sdhci_pxav2_probe,
- .remove = __devexit_p(sdhci_pxav2_remove),
+ .remove = sdhci_pxav2_remove,
};
module_platform_driver(sdhci_pxav2_driver);
diff --git a/drivers/mmc/host/sdhci-pxav3.c b/drivers/mmc/host/sdhci-pxav3.c
index 60829c9..fad0966 100644
--- a/drivers/mmc/host/sdhci-pxav3.c
+++ b/drivers/mmc/host/sdhci-pxav3.c
@@ -222,7 +222,7 @@
}
#endif
-static int __devinit sdhci_pxav3_probe(struct platform_device *pdev)
+static int sdhci_pxav3_probe(struct platform_device *pdev)
{
struct sdhci_pltfm_host *pltfm_host;
struct sdhci_pxa_platdata *pdata = pdev->dev.platform_data;
@@ -324,7 +324,7 @@
return ret;
}
-static int __devexit sdhci_pxav3_remove(struct platform_device *pdev)
+static int sdhci_pxav3_remove(struct platform_device *pdev)
{
struct sdhci_host *host = platform_get_drvdata(pdev);
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
@@ -357,7 +357,7 @@
.pm = SDHCI_PLTFM_PMOPS,
},
.probe = sdhci_pxav3_probe,
- .remove = __devexit_p(sdhci_pxav3_remove),
+ .remove = sdhci_pxav3_remove,
};
module_platform_driver(sdhci_pxav3_driver);
diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c
index 82b7a7a..82a8de1 100644
--- a/drivers/mmc/host/sdhci-s3c.c
+++ b/drivers/mmc/host/sdhci-s3c.c
@@ -441,7 +441,7 @@
}
#ifdef CONFIG_OF
-static int __devinit sdhci_s3c_parse_dt(struct device *dev,
+static int sdhci_s3c_parse_dt(struct device *dev,
struct sdhci_host *host, struct s3c_sdhci_platdata *pdata)
{
struct device_node *node = dev->of_node;
@@ -532,7 +532,7 @@
return 0;
}
#else
-static int __devinit sdhci_s3c_parse_dt(struct device *dev,
+static int sdhci_s3c_parse_dt(struct device *dev,
struct sdhci_host *host, struct s3c_sdhci_platdata *pdata)
{
return -EINVAL;
@@ -555,7 +555,7 @@
platform_get_device_id(pdev)->driver_data;
}
-static int __devinit sdhci_s3c_probe(struct platform_device *pdev)
+static int sdhci_s3c_probe(struct platform_device *pdev)
{
struct s3c_sdhci_platdata *pdata;
struct sdhci_s3c_drv_data *drv_data;
@@ -781,7 +781,7 @@
return ret;
}
-static int __devexit sdhci_s3c_remove(struct platform_device *pdev)
+static int sdhci_s3c_remove(struct platform_device *pdev)
{
struct sdhci_host *host = platform_get_drvdata(pdev);
struct sdhci_s3c *sc = sdhci_priv(host);
@@ -911,7 +911,7 @@
static struct platform_driver sdhci_s3c_driver = {
.probe = sdhci_s3c_probe,
- .remove = __devexit_p(sdhci_s3c_remove),
+ .remove = sdhci_s3c_remove,
.id_table = sdhci_s3c_driver_ids,
.driver = {
.owner = THIS_MODULE,
diff --git a/drivers/mmc/host/sdhci-spear.c b/drivers/mmc/host/sdhci-spear.c
index 87a7009..c6ece0b 100644
--- a/drivers/mmc/host/sdhci-spear.c
+++ b/drivers/mmc/host/sdhci-spear.c
@@ -71,8 +71,7 @@
}
#ifdef CONFIG_OF
-static struct sdhci_plat_data * __devinit
-sdhci_probe_config_dt(struct platform_device *pdev)
+static struct sdhci_plat_data *sdhci_probe_config_dt(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
struct sdhci_plat_data *pdata = NULL;
@@ -96,14 +95,13 @@
return pdata;
}
#else
-static struct sdhci_plat_data * __devinit
-sdhci_probe_config_dt(struct platform_device *pdev)
+static struct sdhci_plat_data *sdhci_probe_config_dt(struct platform_device *pdev)
{
return ERR_PTR(-ENOSYS);
}
#endif
-static int __devinit sdhci_probe(struct platform_device *pdev)
+static int sdhci_probe(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
struct sdhci_host *host;
@@ -273,7 +271,7 @@
return ret;
}
-static int __devexit sdhci_remove(struct platform_device *pdev)
+static int sdhci_remove(struct platform_device *pdev)
{
struct sdhci_host *host = platform_get_drvdata(pdev);
struct spear_sdhci *sdhci = dev_get_platdata(&pdev->dev);
@@ -341,7 +339,7 @@
.of_match_table = of_match_ptr(sdhci_spear_id_table),
},
.probe = sdhci_probe,
- .remove = __devexit_p(sdhci_remove),
+ .remove = sdhci_remove,
};
module_platform_driver(sdhci_driver);
diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c
index f9eb916..3695b2e 100644
--- a/drivers/mmc/host/sdhci-tegra.c
+++ b/drivers/mmc/host/sdhci-tegra.c
@@ -206,7 +206,7 @@
};
#endif
-static const struct of_device_id sdhci_tegra_dt_match[] __devinitdata = {
+static const struct of_device_id sdhci_tegra_dt_match[] = {
#ifdef CONFIG_ARCH_TEGRA_3x_SOC
{ .compatible = "nvidia,tegra30-sdhci", .data = &soc_data_tegra30 },
#endif
@@ -217,7 +217,7 @@
};
MODULE_DEVICE_TABLE(of, sdhci_dt_ids);
-static struct tegra_sdhci_platform_data * __devinit sdhci_tegra_dt_parse_pdata(
+static struct tegra_sdhci_platform_data *sdhci_tegra_dt_parse_pdata(
struct platform_device *pdev)
{
struct tegra_sdhci_platform_data *plat;
@@ -244,7 +244,7 @@
return plat;
}
-static int __devinit sdhci_tegra_probe(struct platform_device *pdev)
+static int sdhci_tegra_probe(struct platform_device *pdev)
{
const struct of_device_id *match;
const struct sdhci_tegra_soc_data *soc_data;
@@ -370,7 +370,7 @@
return rc;
}
-static int __devexit sdhci_tegra_remove(struct platform_device *pdev)
+static int sdhci_tegra_remove(struct platform_device *pdev)
{
struct sdhci_host *host = platform_get_drvdata(pdev);
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
@@ -407,7 +407,7 @@
.pm = SDHCI_PLTFM_PMOPS,
},
.probe = sdhci_tegra_probe,
- .remove = __devexit_p(sdhci_tegra_remove),
+ .remove = sdhci_tegra_remove,
};
module_platform_driver(sdhci_tegra_driver);
diff --git a/drivers/mmc/host/sh_mmcif.c b/drivers/mmc/host/sh_mmcif.c
index ae79523..9a4c151 100644
--- a/drivers/mmc/host/sh_mmcif.c
+++ b/drivers/mmc/host/sh_mmcif.c
@@ -1298,7 +1298,7 @@
dev_warn(mmc_dev(mmc), "Platform OCR mask is ignored\n");
}
-static int __devinit sh_mmcif_probe(struct platform_device *pdev)
+static int sh_mmcif_probe(struct platform_device *pdev)
{
int ret = 0, irq[2];
struct mmc_host *mmc;
@@ -1424,7 +1424,7 @@
return ret;
}
-static int __devexit sh_mmcif_remove(struct platform_device *pdev)
+static int sh_mmcif_remove(struct platform_device *pdev)
{
struct sh_mmcif_host *host = platform_get_drvdata(pdev);
struct sh_mmcif_plat_data *pd = pdev->dev.platform_data;
diff --git a/drivers/mmc/host/sh_mobile_sdhi.c b/drivers/mmc/host/sh_mobile_sdhi.c
index d6ff853..524a7f7 100644
--- a/drivers/mmc/host/sh_mobile_sdhi.c
+++ b/drivers/mmc/host/sh_mobile_sdhi.c
@@ -117,7 +117,7 @@
.cd_wakeup = sh_mobile_sdhi_cd_wakeup,
};
-static int __devinit sh_mobile_sdhi_probe(struct platform_device *pdev)
+static int sh_mobile_sdhi_probe(struct platform_device *pdev)
{
struct sh_mobile_sdhi *priv;
struct tmio_mmc_data *mmc_data;
@@ -328,7 +328,7 @@
.of_match_table = sh_mobile_sdhi_of_match,
},
.probe = sh_mobile_sdhi_probe,
- .remove = __devexit_p(sh_mobile_sdhi_remove),
+ .remove = sh_mobile_sdhi_remove,
};
module_platform_driver(sh_mobile_sdhi_driver);
diff --git a/drivers/mmc/host/tmio_mmc.c b/drivers/mmc/host/tmio_mmc.c
index 113ce6c..139212e 100644
--- a/drivers/mmc/host/tmio_mmc.c
+++ b/drivers/mmc/host/tmio_mmc.c
@@ -57,7 +57,7 @@
#define tmio_mmc_resume NULL
#endif
-static int __devinit tmio_mmc_probe(struct platform_device *pdev)
+static int tmio_mmc_probe(struct platform_device *pdev)
{
const struct mfd_cell *cell = mfd_get_cell(pdev);
struct tmio_mmc_data *pdata;
@@ -107,7 +107,7 @@
return ret;
}
-static int __devexit tmio_mmc_remove(struct platform_device *pdev)
+static int tmio_mmc_remove(struct platform_device *pdev)
{
const struct mfd_cell *cell = mfd_get_cell(pdev);
struct mmc_host *mmc = platform_get_drvdata(pdev);
@@ -133,7 +133,7 @@
.owner = THIS_MODULE,
},
.probe = tmio_mmc_probe,
- .remove = __devexit_p(tmio_mmc_remove),
+ .remove = tmio_mmc_remove,
.suspend = tmio_mmc_suspend,
.resume = tmio_mmc_resume,
};
diff --git a/drivers/mmc/host/tmio_mmc_pio.c b/drivers/mmc/host/tmio_mmc_pio.c
index 0d8a9bb..50bf495 100644
--- a/drivers/mmc/host/tmio_mmc_pio.c
+++ b/drivers/mmc/host/tmio_mmc_pio.c
@@ -918,7 +918,7 @@
dev_warn(mmc_dev(mmc), "Platform OCR mask is ignored\n");
}
-int __devinit tmio_mmc_host_probe(struct tmio_mmc_host **host,
+int tmio_mmc_host_probe(struct tmio_mmc_host **host,
struct platform_device *pdev,
struct tmio_mmc_data *pdata)
{
diff --git a/drivers/mmc/host/via-sdmmc.c b/drivers/mmc/host/via-sdmmc.c
index f18bece..4f84586 100644
--- a/drivers/mmc/host/via-sdmmc.c
+++ b/drivers/mmc/host/via-sdmmc.c
@@ -1082,7 +1082,7 @@
msleep(1);
}
-static int __devinit via_sd_probe(struct pci_dev *pcidev,
+static int via_sd_probe(struct pci_dev *pcidev,
const struct pci_device_id *id)
{
struct mmc_host *mmc;
@@ -1176,7 +1176,7 @@
return ret;
}
-static void __devexit via_sd_remove(struct pci_dev *pcidev)
+static void via_sd_remove(struct pci_dev *pcidev)
{
struct via_crdr_mmc_host *sdhost = pci_get_drvdata(pcidev);
unsigned long flags;
@@ -1332,7 +1332,7 @@
.name = DRV_NAME,
.id_table = via_ids,
.probe = via_sd_probe,
- .remove = __devexit_p(via_sd_remove),
+ .remove = via_sd_remove,
.suspend = via_sd_suspend,
.resume = via_sd_resume,
};
diff --git a/drivers/mmc/host/wbsd.c b/drivers/mmc/host/wbsd.c
index 64acd9c..e954b77 100644
--- a/drivers/mmc/host/wbsd.c
+++ b/drivers/mmc/host/wbsd.c
@@ -1196,7 +1196,7 @@
* Allocate/free MMC structure.
*/
-static int __devinit wbsd_alloc_mmc(struct device *dev)
+static int wbsd_alloc_mmc(struct device *dev)
{
struct mmc_host *mmc;
struct wbsd_host *host;
@@ -1288,7 +1288,7 @@
* Scan for known chip id:s
*/
-static int __devinit wbsd_scan(struct wbsd_host *host)
+static int wbsd_scan(struct wbsd_host *host)
{
int i, j, k;
int id;
@@ -1344,7 +1344,7 @@
* Allocate/free io port ranges
*/
-static int __devinit wbsd_request_region(struct wbsd_host *host, int base)
+static int wbsd_request_region(struct wbsd_host *host, int base)
{
if (base & 0x7)
return -EINVAL;
@@ -1374,7 +1374,7 @@
* Allocate/free DMA port and buffer
*/
-static void __devinit wbsd_request_dma(struct wbsd_host *host, int dma)
+static void wbsd_request_dma(struct wbsd_host *host, int dma)
{
if (dma < 0)
return;
@@ -1452,7 +1452,7 @@
* Allocate/free IRQ.
*/
-static int __devinit wbsd_request_irq(struct wbsd_host *host, int irq)
+static int wbsd_request_irq(struct wbsd_host *host, int irq)
{
int ret;
@@ -1502,7 +1502,7 @@
* Allocate all resources for the host.
*/
-static int __devinit wbsd_request_resources(struct wbsd_host *host,
+static int wbsd_request_resources(struct wbsd_host *host,
int base, int irq, int dma)
{
int ret;
@@ -1644,7 +1644,7 @@
* *
\*****************************************************************************/
-static int __devinit wbsd_init(struct device *dev, int base, int irq, int dma,
+static int wbsd_init(struct device *dev, int base, int irq, int dma,
int pnp)
{
struct wbsd_host *host = NULL;
@@ -1735,7 +1735,7 @@
return 0;
}
-static void __devexit wbsd_shutdown(struct device *dev, int pnp)
+static void wbsd_shutdown(struct device *dev, int pnp)
{
struct mmc_host *mmc = dev_get_drvdata(dev);
struct wbsd_host *host;
@@ -1762,13 +1762,13 @@
* Non-PnP
*/
-static int __devinit wbsd_probe(struct platform_device *dev)
+static int wbsd_probe(struct platform_device *dev)
{
/* Use the module parameters for resources */
return wbsd_init(&dev->dev, param_io, param_irq, param_dma, 0);
}
-static int __devexit wbsd_remove(struct platform_device *dev)
+static int wbsd_remove(struct platform_device *dev)
{
wbsd_shutdown(&dev->dev, 0);
@@ -1781,7 +1781,7 @@
#ifdef CONFIG_PNP
-static int __devinit
+static int
wbsd_pnp_probe(struct pnp_dev *pnpdev, const struct pnp_device_id *dev_id)
{
int io, irq, dma;
@@ -1801,7 +1801,7 @@
return wbsd_init(&pnpdev->dev, io, irq, dma, 1);
}
-static void __devexit wbsd_pnp_remove(struct pnp_dev *dev)
+static void wbsd_pnp_remove(struct pnp_dev *dev)
{
wbsd_shutdown(&dev->dev, 1);
}
@@ -1941,7 +1941,7 @@
static struct platform_driver wbsd_driver = {
.probe = wbsd_probe,
- .remove = __devexit_p(wbsd_remove),
+ .remove = wbsd_remove,
.suspend = wbsd_platform_suspend,
.resume = wbsd_platform_resume,
@@ -1957,7 +1957,7 @@
.name = DRIVER_NAME,
.id_table = pnp_dev_table,
.probe = wbsd_pnp_probe,
- .remove = __devexit_p(wbsd_pnp_remove),
+ .remove = wbsd_pnp_remove,
.suspend = wbsd_pnp_suspend,
.resume = wbsd_pnp_resume,
diff --git a/drivers/mtd/nand/sh_flctl.c b/drivers/mtd/nand/sh_flctl.c
index 4fbfe96..f48ac5d 100644
--- a/drivers/mtd/nand/sh_flctl.c
+++ b/drivers/mtd/nand/sh_flctl.c
@@ -727,7 +727,9 @@
if (!flctl->qos_request) {
ret = dev_pm_qos_add_request(&flctl->pdev->dev,
- &flctl->pm_qos, 100);
+ &flctl->pm_qos,
+ DEV_PM_QOS_LATENCY,
+ 100);
if (ret < 0)
dev_err(&flctl->pdev->dev,
"PM QoS request failed: %d\n", ret);
diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c
index 605a4ba..cd8ccb2 100644
--- a/drivers/net/usb/hso.c
+++ b/drivers/net/usb/hso.c
@@ -2274,6 +2274,7 @@
/* unlink and free TX URB */
usb_free_urb(serial->tx_urb);
kfree(serial->tx_data);
+ tty_port_destroy(&serial->port);
}
static int hso_serial_common_create(struct hso_serial *serial, int num_urbs,
@@ -2283,12 +2284,12 @@
int minor;
int i;
+ tty_port_init(&serial->port);
+
minor = get_free_serial_index();
if (minor < 0)
goto exit;
- tty_port_init(&serial->port);
-
/* register our minor number */
serial->parent->dev = tty_port_register_device(&serial->port, tty_drv,
minor, &serial->parent->interface->dev);
diff --git a/drivers/parport/Kconfig b/drivers/parport/Kconfig
index 4b6e4e7..0e60438 100644
--- a/drivers/parport/Kconfig
+++ b/drivers/parport/Kconfig
@@ -57,8 +57,8 @@
will be called parport_serial.
config PARPORT_PC_FIFO
- bool "Use FIFO/DMA if available (EXPERIMENTAL)"
- depends on PARPORT_PC && EXPERIMENTAL
+ bool "Use FIFO/DMA if available"
+ depends on PARPORT_PC
help
Many parallel port chipsets provide hardware that can speed up
printing. Say Y here if you want to take advantage of that.
@@ -70,8 +70,8 @@
specify which IRQ/DMA to use.
config PARPORT_PC_SUPERIO
- bool "SuperIO chipset support (EXPERIMENTAL)"
- depends on PARPORT_PC && EXPERIMENTAL
+ bool "SuperIO chipset support"
+ depends on PARPORT_PC
help
Saying Y here enables some probes for Super-IO chipsets in order to
find out things like base addresses, IRQ lines and DMA channels. It
@@ -85,8 +85,8 @@
ports. If unsure, say N.
config PARPORT_IP32
- tristate "SGI IP32 builtin port (EXPERIMENTAL)"
- depends on SGI_IP32 && EXPERIMENTAL
+ tristate "SGI IP32 builtin port"
+ depends on SGI_IP32
select PARPORT_NOT_PC
help
Say Y here if you need support for the parallel port on
@@ -126,8 +126,8 @@
select PARPORT_NOT_PC
config PARPORT_SUNBPP
- tristate "Sparc hardware (EXPERIMENTAL)"
- depends on SBUS && EXPERIMENTAL
+ tristate "Sparc hardware"
+ depends on SBUS
select PARPORT_NOT_PC
help
This driver provides support for the bidirectional parallel port
diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
index 8d688b26..0c3efcf 100644
--- a/drivers/pci/Makefile
+++ b/drivers/pci/Makefile
@@ -4,7 +4,7 @@
obj-y += access.o bus.o probe.o host-bridge.o remove.o pci.o \
pci-driver.o search.o pci-sysfs.o rom.o setup-res.o \
- irq.o vpd.o
+ irq.o vpd.o setup-bus.o
obj-$(CONFIG_PROC_FS) += proc.o
obj-$(CONFIG_SYSFS) += slot.o
@@ -15,8 +15,6 @@
obj-$(CONFIG_PCI_IOAPIC) += ioapic.o
-obj-$(CONFIG_HOTPLUG) += hotplug.o
-
# Build the PCI Hotplug drivers if we were asked to
obj-$(CONFIG_HOTPLUG_PCI) += hotplug/
ifdef CONFIG_HOTPLUG_PCI
@@ -60,9 +58,6 @@
# SMBIOS provided firmware instance and labels
obj-$(CONFIG_PCI_LABEL) += pci-label.o
-# Cardbus & CompactPCI use setup-bus
-obj-$(CONFIG_HOTPLUG) += setup-bus.o
-
obj-$(CONFIG_PCI_SYSCALL) += syscall.o
obj-$(CONFIG_PCI_STUB) += pci-stub.o
diff --git a/drivers/pci/hotplug.c b/drivers/pci/hotplug.c
deleted file mode 100644
index 2b5352a..0000000
--- a/drivers/pci/hotplug.c
+++ /dev/null
@@ -1,37 +0,0 @@
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/module.h>
-#include "pci.h"
-
-int pci_uevent(struct device *dev, struct kobj_uevent_env *env)
-{
- struct pci_dev *pdev;
-
- if (!dev)
- return -ENODEV;
-
- pdev = to_pci_dev(dev);
- if (!pdev)
- return -ENODEV;
-
- if (add_uevent_var(env, "PCI_CLASS=%04X", pdev->class))
- return -ENOMEM;
-
- if (add_uevent_var(env, "PCI_ID=%04X:%04X", pdev->vendor, pdev->device))
- return -ENOMEM;
-
- if (add_uevent_var(env, "PCI_SUBSYS_ID=%04X:%04X", pdev->subsystem_vendor,
- pdev->subsystem_device))
- return -ENOMEM;
-
- if (add_uevent_var(env, "PCI_SLOT_NAME=%s", pci_name(pdev)))
- return -ENOMEM;
-
- if (add_uevent_var(env, "MODALIAS=pci:v%08Xd%08Xsv%08Xsd%08Xbc%02Xsc%02Xi%02x",
- pdev->vendor, pdev->device,
- pdev->subsystem_vendor, pdev->subsystem_device,
- (u8)(pdev->class >> 16), (u8)(pdev->class >> 8),
- (u8)(pdev->class)))
- return -ENOMEM;
- return 0;
-}
diff --git a/drivers/pci/hotplug/cpcihp_zt5550.c b/drivers/pci/hotplug/cpcihp_zt5550.c
index 6bf8d2a..449b4bb 100644
--- a/drivers/pci/hotplug/cpcihp_zt5550.c
+++ b/drivers/pci/hotplug/cpcihp_zt5550.c
@@ -271,7 +271,7 @@
}
-static void __devexit zt5550_hc_remove_one(struct pci_dev *pdev)
+static void zt5550_hc_remove_one(struct pci_dev *pdev)
{
cpci_hp_stop();
cpci_hp_unregister_bus(bus0);
@@ -290,7 +290,7 @@
.name = "zt5550_hc",
.id_table = zt5550_hc_pci_tbl,
.probe = zt5550_hc_init_one,
- .remove = __devexit_p(zt5550_hc_remove_one),
+ .remove = zt5550_hc_remove_one,
};
static int __init zt5550_init(void)
diff --git a/drivers/pci/ioapic.c b/drivers/pci/ioapic.c
index 205af8d..2eca902 100644
--- a/drivers/pci/ioapic.c
+++ b/drivers/pci/ioapic.c
@@ -27,7 +27,7 @@
u32 gsi_base;
};
-static int __devinit ioapic_probe(struct pci_dev *dev, const struct pci_device_id *ent)
+static int ioapic_probe(struct pci_dev *dev, const struct pci_device_id *ent)
{
acpi_handle handle;
acpi_status status;
@@ -88,7 +88,7 @@
return -ENODEV;
}
-static void __devexit ioapic_remove(struct pci_dev *dev)
+static void ioapic_remove(struct pci_dev *dev)
{
struct ioapic *ioapic = pci_get_drvdata(dev);
@@ -110,7 +110,7 @@
.name = "ioapic",
.id_table = ioapic_devices,
.probe = ioapic_probe,
- .remove = __devexit_p(ioapic_remove),
+ .remove = ioapic_remove,
};
static int __init ioapic_init(void)
diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
index c5792d6..1af4008 100644
--- a/drivers/pci/pci-acpi.c
+++ b/drivers/pci/pci-acpi.c
@@ -17,10 +17,9 @@
#include <linux/pci-acpi.h>
#include <linux/pm_runtime.h>
+#include <linux/pm_qos.h>
#include "pci.h"
-static DEFINE_MUTEX(pci_acpi_pm_notify_mtx);
-
/**
* pci_acpi_wake_bus - Wake-up notification handler for root buses.
* @handle: ACPI handle of a device the notification is for.
@@ -68,67 +67,6 @@
}
/**
- * add_pm_notifier - Register PM notifier for given ACPI device.
- * @dev: ACPI device to add the notifier for.
- * @context: PCI device or bus to check for PME status if an event is signaled.
- *
- * NOTE: @dev need not be a run-wake or wake-up device to be a valid source of
- * PM wake-up events. For example, wake-up events may be generated for bridges
- * if one of the devices below the bridge is signaling PME, even if the bridge
- * itself doesn't have a wake-up GPE associated with it.
- */
-static acpi_status add_pm_notifier(struct acpi_device *dev,
- acpi_notify_handler handler,
- void *context)
-{
- acpi_status status = AE_ALREADY_EXISTS;
-
- mutex_lock(&pci_acpi_pm_notify_mtx);
-
- if (dev->wakeup.flags.notifier_present)
- goto out;
-
- status = acpi_install_notify_handler(dev->handle,
- ACPI_SYSTEM_NOTIFY,
- handler, context);
- if (ACPI_FAILURE(status))
- goto out;
-
- dev->wakeup.flags.notifier_present = true;
-
- out:
- mutex_unlock(&pci_acpi_pm_notify_mtx);
- return status;
-}
-
-/**
- * remove_pm_notifier - Unregister PM notifier from given ACPI device.
- * @dev: ACPI device to remove the notifier from.
- */
-static acpi_status remove_pm_notifier(struct acpi_device *dev,
- acpi_notify_handler handler)
-{
- acpi_status status = AE_BAD_PARAMETER;
-
- mutex_lock(&pci_acpi_pm_notify_mtx);
-
- if (!dev->wakeup.flags.notifier_present)
- goto out;
-
- status = acpi_remove_notify_handler(dev->handle,
- ACPI_SYSTEM_NOTIFY,
- handler);
- if (ACPI_FAILURE(status))
- goto out;
-
- dev->wakeup.flags.notifier_present = false;
-
- out:
- mutex_unlock(&pci_acpi_pm_notify_mtx);
- return status;
-}
-
-/**
* pci_acpi_add_bus_pm_notifier - Register PM notifier for given PCI bus.
* @dev: ACPI device to add the notifier for.
* @pci_bus: PCI bus to walk checking for PME status if an event is signaled.
@@ -136,7 +74,7 @@
acpi_status pci_acpi_add_bus_pm_notifier(struct acpi_device *dev,
struct pci_bus *pci_bus)
{
- return add_pm_notifier(dev, pci_acpi_wake_bus, pci_bus);
+ return acpi_add_pm_notifier(dev, pci_acpi_wake_bus, pci_bus);
}
/**
@@ -145,7 +83,7 @@
*/
acpi_status pci_acpi_remove_bus_pm_notifier(struct acpi_device *dev)
{
- return remove_pm_notifier(dev, pci_acpi_wake_bus);
+ return acpi_remove_pm_notifier(dev, pci_acpi_wake_bus);
}
/**
@@ -156,7 +94,7 @@
acpi_status pci_acpi_add_pm_notifier(struct acpi_device *dev,
struct pci_dev *pci_dev)
{
- return add_pm_notifier(dev, pci_acpi_wake_dev, pci_dev);
+ return acpi_add_pm_notifier(dev, pci_acpi_wake_dev, pci_dev);
}
/**
@@ -165,7 +103,7 @@
*/
acpi_status pci_acpi_remove_pm_notifier(struct acpi_device *dev)
{
- return remove_pm_notifier(dev, pci_acpi_wake_dev);
+ return acpi_remove_pm_notifier(dev, pci_acpi_wake_dev);
}
phys_addr_t acpi_pci_root_get_mcfg_addr(acpi_handle handle)
@@ -257,11 +195,16 @@
return -ENODEV;
switch (state) {
+ case PCI_D3cold:
+ if (dev_pm_qos_flags(&dev->dev, PM_QOS_FLAG_NO_POWER_OFF) ==
+ PM_QOS_FLAGS_ALL) {
+ error = -EBUSY;
+ break;
+ }
case PCI_D0:
case PCI_D1:
case PCI_D2:
case PCI_D3hot:
- case PCI_D3cold:
error = acpi_bus_set_power(handle, state_conv[state]);
}
diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index 6c94fc9..1dc78c5 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -89,10 +89,6 @@
spin_unlock(&drv->dynids.lock);
}
-/*
- * Dynamic device ID manipulation via sysfs is disabled for !CONFIG_HOTPLUG
- */
-#ifdef CONFIG_HOTPLUG
/**
* store_new_id - sysfs frontend to pci_add_dynid()
* @driver: target device driver
@@ -191,10 +187,6 @@
__ATTR_NULL,
};
-#else
-#define pci_drv_attrs NULL
-#endif /* CONFIG_HOTPLUG */
-
/**
* pci_match_id - See if a pci device matches a given pci_id table
* @ids: array of PCI device id structures to search in
@@ -1223,12 +1215,38 @@
put_device(&dev->dev);
}
-#ifndef CONFIG_HOTPLUG
-int pci_uevent(struct device *dev, struct kobj_uevent_env *env)
+static int pci_uevent(struct device *dev, struct kobj_uevent_env *env)
{
- return -ENODEV;
+ struct pci_dev *pdev;
+
+ if (!dev)
+ return -ENODEV;
+
+ pdev = to_pci_dev(dev);
+ if (!pdev)
+ return -ENODEV;
+
+ if (add_uevent_var(env, "PCI_CLASS=%04X", pdev->class))
+ return -ENOMEM;
+
+ if (add_uevent_var(env, "PCI_ID=%04X:%04X", pdev->vendor, pdev->device))
+ return -ENOMEM;
+
+ if (add_uevent_var(env, "PCI_SUBSYS_ID=%04X:%04X", pdev->subsystem_vendor,
+ pdev->subsystem_device))
+ return -ENOMEM;
+
+ if (add_uevent_var(env, "PCI_SLOT_NAME=%s", pci_name(pdev)))
+ return -ENOMEM;
+
+ if (add_uevent_var(env, "MODALIAS=pci:v%08Xd%08Xsv%08Xsd%08Xbc%02Xsc%02Xi%02x",
+ pdev->vendor, pdev->device,
+ pdev->subsystem_vendor, pdev->subsystem_device,
+ (u8)(pdev->class >> 16), (u8)(pdev->class >> 8),
+ (u8)(pdev->class)))
+ return -ENOMEM;
+ return 0;
}
-#endif
struct bus_type pci_bus_type = {
.name = "pci",
diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
index f39378d..68d56f0 100644
--- a/drivers/pci/pci-sysfs.c
+++ b/drivers/pci/pci-sysfs.c
@@ -284,7 +284,6 @@
return count;
}
-#ifdef CONFIG_HOTPLUG
static DEFINE_MUTEX(pci_remove_rescan_mutex);
static ssize_t bus_rescan_store(struct bus_type *bus, const char *buf,
size_t count)
@@ -377,8 +376,6 @@
return count;
}
-#endif
-
#if defined(CONFIG_PM_RUNTIME) && defined(CONFIG_ACPI)
static ssize_t d3cold_allowed_store(struct device *dev,
struct device_attribute *attr,
@@ -424,10 +421,8 @@
__ATTR(broken_parity_status,(S_IRUGO|S_IWUSR),
broken_parity_status_show,broken_parity_status_store),
__ATTR(msi_bus, 0644, msi_bus_show, msi_bus_store),
-#ifdef CONFIG_HOTPLUG
__ATTR(remove, (S_IWUSR|S_IWGRP), NULL, remove_store),
__ATTR(rescan, (S_IWUSR|S_IWGRP), NULL, dev_rescan_store),
-#endif
#if defined(CONFIG_PM_RUNTIME) && defined(CONFIG_ACPI)
__ATTR(d3cold_allowed, 0644, d3cold_allowed_show, d3cold_allowed_store),
#endif
@@ -435,9 +430,7 @@
};
struct device_attribute pcibus_dev_attrs[] = {
-#ifdef CONFIG_HOTPLUG
__ATTR(rescan, (S_IWUSR|S_IWGRP), NULL, dev_bus_rescan_store),
-#endif
__ATTR(cpuaffinity, S_IRUGO, pci_bus_show_cpumaskaffinity, NULL),
__ATTR(cpulistaffinity, S_IRUGO, pci_bus_show_cpulistaffinity, NULL),
__ATTR_NULL,
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index aabf647..bdf66b5 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -86,7 +86,7 @@
* the dfl or actual value as it sees fit. Don't forget this is
* measured in 32-bit words, not bytes.
*/
-u8 pci_dfl_cache_line_size __devinitdata = L1_CACHE_BYTES >> 2;
+u8 pci_dfl_cache_line_size = L1_CACHE_BYTES >> 2;
u8 pci_cache_line_size;
/*
@@ -3857,7 +3857,7 @@
late_initcall(pci_resource_alignment_sysfs_init);
-static void __devinit pci_no_domains(void)
+static void pci_no_domains(void)
{
#ifdef CONFIG_PCI_DOMAINS
pci_domains_supported = 0;
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index fd92aab..e253881 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -8,7 +8,6 @@
/* Functions internal to the PCI core code */
-extern int pci_uevent(struct device *dev, struct kobj_uevent_env *env);
extern int pci_create_sysfs_dev_files(struct pci_dev *pdev);
extern void pci_remove_sysfs_dev_files(struct pci_dev *pdev);
#if !defined(CONFIG_DMI) && !defined(CONFIG_ACPI)
@@ -159,11 +158,7 @@
}
extern struct device_attribute pci_dev_attrs[];
extern struct device_attribute pcibus_dev_attrs[];
-#ifdef CONFIG_HOTPLUG
extern struct bus_attribute pci_bus_attrs[];
-#else
-#define pci_bus_attrs NULL
-#endif
/**
diff --git a/drivers/pci/pcie/aer/aerdrv.c b/drivers/pci/pcie/aer/aerdrv.c
index 030cf12..76ef634 100644
--- a/drivers/pci/pcie/aer/aerdrv.c
+++ b/drivers/pci/pcie/aer/aerdrv.c
@@ -41,7 +41,7 @@
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");
-static int __devinit aer_probe(struct pcie_device *dev);
+static int aer_probe(struct pcie_device *dev);
static void aer_remove(struct pcie_device *dev);
static pci_ers_result_t aer_error_detected(struct pci_dev *dev,
enum pci_channel_state error);
@@ -300,7 +300,7 @@
*
* Invoked when PCI Express bus loads AER service driver.
*/
-static int __devinit aer_probe(struct pcie_device *dev)
+static int aer_probe(struct pcie_device *dev)
{
int status;
struct aer_rpc *rpc;
diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c
index 0761d90..d4824cb 100644
--- a/drivers/pci/pcie/portdrv_pci.c
+++ b/drivers/pci/pcie/portdrv_pci.c
@@ -182,7 +182,7 @@
* this port device.
*
*/
-static int __devinit pcie_portdrv_probe(struct pci_dev *dev,
+static int pcie_portdrv_probe(struct pci_dev *dev,
const struct pci_device_id *id)
{
int status;
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index ec909af..3683f60 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -305,7 +305,7 @@
}
}
-static void __devinit pci_read_bridge_io(struct pci_bus *child)
+static void pci_read_bridge_io(struct pci_bus *child)
{
struct pci_dev *dev = child->self;
u8 io_base_lo, io_limit_lo;
@@ -345,7 +345,7 @@
}
}
-static void __devinit pci_read_bridge_mmio(struct pci_bus *child)
+static void pci_read_bridge_mmio(struct pci_bus *child)
{
struct pci_dev *dev = child->self;
u16 mem_base_lo, mem_limit_lo;
@@ -367,7 +367,7 @@
}
}
-static void __devinit pci_read_bridge_mmio_pref(struct pci_bus *child)
+static void pci_read_bridge_mmio_pref(struct pci_bus *child)
{
struct pci_dev *dev = child->self;
u16 mem_base_lo, mem_limit_lo;
@@ -417,7 +417,7 @@
}
}
-void __devinit pci_read_bridge_bases(struct pci_bus *child)
+void pci_read_bridge_bases(struct pci_bus *child)
{
struct pci_dev *dev = child->self;
struct resource *res;
@@ -705,7 +705,7 @@
* them, we proceed to assigning numbers to the remaining buses in
* order to avoid overlaps between old and new bus numbers.
*/
-int __devinit pci_scan_bridge(struct pci_bus *bus, struct pci_dev *dev, int max, int pass)
+int pci_scan_bridge(struct pci_bus *bus, struct pci_dev *dev, int max, int pass)
{
struct pci_bus *child;
int is_cardbus = (dev->hdr_type == PCI_HEADER_TYPE_CARDBUS);
@@ -1586,7 +1586,7 @@
}
EXPORT_SYMBOL_GPL(pcie_bus_configure_settings);
-unsigned int __devinit pci_scan_child_bus(struct pci_bus *bus)
+unsigned int pci_scan_child_bus(struct pci_bus *bus)
{
unsigned int devfn, pass, max = bus->busn_res.start;
struct pci_dev *dev;
@@ -1790,7 +1790,7 @@
res, ret ? "can not be" : "is");
}
-struct pci_bus * __devinit pci_scan_root_bus(struct device *parent, int bus,
+struct pci_bus *pci_scan_root_bus(struct device *parent, int bus,
struct pci_ops *ops, void *sysdata, struct list_head *resources)
{
struct pci_host_bridge_window *window;
@@ -1826,7 +1826,7 @@
EXPORT_SYMBOL(pci_scan_root_bus);
/* Deprecated; use pci_scan_root_bus() instead */
-struct pci_bus * __devinit pci_scan_bus_parented(struct device *parent,
+struct pci_bus *pci_scan_bus_parented(struct device *parent,
int bus, struct pci_ops *ops, void *sysdata)
{
LIST_HEAD(resources);
@@ -1844,7 +1844,7 @@
}
EXPORT_SYMBOL(pci_scan_bus_parented);
-struct pci_bus * __devinit pci_scan_bus(int bus, struct pci_ops *ops,
+struct pci_bus *pci_scan_bus(int bus, struct pci_ops *ops,
void *sysdata)
{
LIST_HEAD(resources);
@@ -1864,7 +1864,6 @@
}
EXPORT_SYMBOL(pci_scan_bus);
-#ifdef CONFIG_HOTPLUG
/**
* pci_rescan_bus_bridge_resize - scan a PCI bus for devices.
* @bridge: PCI bridge for the bus to scan
@@ -1894,7 +1893,6 @@
EXPORT_SYMBOL(pci_scan_slot);
EXPORT_SYMBOL(pci_scan_bridge);
EXPORT_SYMBOL_GPL(pci_scan_child_bus);
-#endif
static int __init pci_sort_bf_cmp(const struct device *d_a, const struct device *d_b)
{
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 7a451ff..22ad3ee 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -37,7 +37,7 @@
* key system devices. For devices that need to have mmio decoding always-on,
* we need to set the dev->mmio_always_on bit.
*/
-static void __devinit quirk_mmio_always_on(struct pci_dev *dev)
+static void quirk_mmio_always_on(struct pci_dev *dev)
{
dev->mmio_always_on = 1;
}
@@ -48,7 +48,7 @@
* Mark this device with a broken_parity_status, to allow
* PCI scanning code to "skip" this now blacklisted device.
*/
-static void __devinit quirk_mellanox_tavor(struct pci_dev *dev)
+static void quirk_mellanox_tavor(struct pci_dev *dev)
{
dev->broken_parity_status = 1; /* This device gives false positives */
}
@@ -83,7 +83,7 @@
This appears to be BIOS not version dependent. So presumably there is a
chipset level fix */
-static void __devinit quirk_isa_dma_hangs(struct pci_dev *dev)
+static void quirk_isa_dma_hangs(struct pci_dev *dev)
{
if (!isa_dma_bridge_buggy) {
isa_dma_bridge_buggy=1;
@@ -106,7 +106,7 @@
* Intel NM10 "TigerPoint" LPC PM1a_STS.BM_STS must be clear
* for some HT machines to use C4 w/o hanging.
*/
-static void __devinit quirk_tigerpoint_bm_sts(struct pci_dev *dev)
+static void quirk_tigerpoint_bm_sts(struct pci_dev *dev)
{
u32 pmbase;
u16 pm1a;
@@ -125,7 +125,7 @@
/*
* Chipsets where PCI->PCI transfers vanish or hang
*/
-static void __devinit quirk_nopcipci(struct pci_dev *dev)
+static void quirk_nopcipci(struct pci_dev *dev)
{
if ((pci_pci_problems & PCIPCI_FAIL)==0) {
dev_info(&dev->dev, "Disabling direct PCI/PCI transfers\n");
@@ -135,7 +135,7 @@
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5597, quirk_nopcipci);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_496, quirk_nopcipci);
-static void __devinit quirk_nopciamd(struct pci_dev *dev)
+static void quirk_nopciamd(struct pci_dev *dev)
{
u8 rev;
pci_read_config_byte(dev, 0x08, &rev);
@@ -150,7 +150,7 @@
/*
* Triton requires workarounds to be used by the drivers
*/
-static void __devinit quirk_triton(struct pci_dev *dev)
+static void quirk_triton(struct pci_dev *dev)
{
if ((pci_pci_problems&PCIPCI_TRITON)==0) {
dev_info(&dev->dev, "Limiting direct PCI/PCI transfers\n");
@@ -229,7 +229,7 @@
/*
* VIA Apollo VP3 needs ETBF on BT848/878
*/
-static void __devinit quirk_viaetbf(struct pci_dev *dev)
+static void quirk_viaetbf(struct pci_dev *dev)
{
if ((pci_pci_problems&PCIPCI_VIAETBF)==0) {
dev_info(&dev->dev, "Limiting direct PCI/PCI transfers\n");
@@ -238,7 +238,7 @@
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C597_0, quirk_viaetbf);
-static void __devinit quirk_vsfx(struct pci_dev *dev)
+static void quirk_vsfx(struct pci_dev *dev)
{
if ((pci_pci_problems&PCIPCI_VSFX)==0) {
dev_info(&dev->dev, "Limiting direct PCI/PCI transfers\n");
@@ -253,7 +253,7 @@
* workaround applied too
* [Info kindly provided by ALi]
*/
-static void __devinit quirk_alimagik(struct pci_dev *dev)
+static void quirk_alimagik(struct pci_dev *dev)
{
if ((pci_pci_problems&PCIPCI_ALIMAGIK)==0) {
dev_info(&dev->dev, "Limiting direct PCI/PCI transfers\n");
@@ -267,7 +267,7 @@
* Natoma has some interesting boundary conditions with Zoran stuff
* at least
*/
-static void __devinit quirk_natoma(struct pci_dev *dev)
+static void quirk_natoma(struct pci_dev *dev)
{
if ((pci_pci_problems&PCIPCI_NATOMA)==0) {
dev_info(&dev->dev, "Limiting direct PCI/PCI transfers\n");
@@ -285,7 +285,7 @@
* This chip can cause PCI parity errors if config register 0xA0 is read
* while DMAs are occurring.
*/
-static void __devinit quirk_citrine(struct pci_dev *dev)
+static void quirk_citrine(struct pci_dev *dev)
{
dev->cfg_size = 0xA0;
}
@@ -295,7 +295,7 @@
* S3 868 and 968 chips report region size equal to 32M, but they decode 64M.
* If it's needed, re-allocate the region.
*/
-static void __devinit quirk_s3_64M(struct pci_dev *dev)
+static void quirk_s3_64M(struct pci_dev *dev)
{
struct resource *r = &dev->resource[0];
@@ -313,7 +313,7 @@
* BAR0 should be 8 bytes; instead, it may be set to something like 8k
* (which conflicts w/ BAR1's memory range).
*/
-static void __devinit quirk_cs5536_vsa(struct pci_dev *dev)
+static void quirk_cs5536_vsa(struct pci_dev *dev)
{
if (pci_resource_len(dev, 0) != 8) {
struct resource *res = &dev->resource[0];
@@ -324,7 +324,7 @@
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA, quirk_cs5536_vsa);
-static void __devinit quirk_io_region(struct pci_dev *dev, unsigned region,
+static void quirk_io_region(struct pci_dev *dev, unsigned region,
unsigned size, int nr, const char *name)
{
region &= ~(size-1);
@@ -352,7 +352,7 @@
* ATI Northbridge setups MCE the processor if you even
* read somewhere between 0x3b0->0x3bb or read 0x3d3
*/
-static void __devinit quirk_ati_exploding_mce(struct pci_dev *dev)
+static void quirk_ati_exploding_mce(struct pci_dev *dev)
{
dev_info(&dev->dev, "ATI Northbridge, reserving I/O ports 0x3b0 to 0x3bb\n");
/* Mae rhaid i ni beidio ag edrych ar y lleoliadiau I/O hyn */
@@ -372,7 +372,7 @@
* 0xE0 (64 bytes of ACPI registers)
* 0xE2 (32 bytes of SMB registers)
*/
-static void __devinit quirk_ali7101_acpi(struct pci_dev *dev)
+static void quirk_ali7101_acpi(struct pci_dev *dev)
{
u16 region;
@@ -440,7 +440,7 @@
* 0x90 (16 bytes of SMB registers)
* and a few strange programmable PIIX4 device resources.
*/
-static void __devinit quirk_piix4_acpi(struct pci_dev *dev)
+static void quirk_piix4_acpi(struct pci_dev *dev)
{
u32 region, res_a;
@@ -489,7 +489,7 @@
* 0x40 (128 bytes of ACPI, GPIO & TCO registers)
* 0x58 (64 bytes of GPIO I/O space)
*/
-static void __devinit quirk_ich4_lpc_acpi(struct pci_dev *dev)
+static void quirk_ich4_lpc_acpi(struct pci_dev *dev)
{
u32 region;
u8 enable;
@@ -531,7 +531,7 @@
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, quirk_ich4_lpc_acpi);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_1, quirk_ich4_lpc_acpi);
-static void __devinit ich6_lpc_acpi_gpio(struct pci_dev *dev)
+static void ich6_lpc_acpi_gpio(struct pci_dev *dev)
{
u32 region;
u8 enable;
@@ -555,7 +555,7 @@
}
}
-static void __devinit ich6_lpc_generic_decode(struct pci_dev *dev, unsigned reg, const char *name, int dynsize)
+static void ich6_lpc_generic_decode(struct pci_dev *dev, unsigned reg, const char *name, int dynsize)
{
u32 val;
u32 size, base;
@@ -583,7 +583,7 @@
dev_info(&dev->dev, "%s PIO at %04x-%04x\n", name, base, base+size-1);
}
-static void __devinit quirk_ich6_lpc(struct pci_dev *dev)
+static void quirk_ich6_lpc(struct pci_dev *dev)
{
/* Shared ACPI/GPIO decode with all ICH6+ */
ich6_lpc_acpi_gpio(dev);
@@ -595,7 +595,7 @@
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_0, quirk_ich6_lpc);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, quirk_ich6_lpc);
-static void __devinit ich7_lpc_generic_decode(struct pci_dev *dev, unsigned reg, const char *name)
+static void ich7_lpc_generic_decode(struct pci_dev *dev, unsigned reg, const char *name)
{
u32 val;
u32 mask, base;
@@ -619,7 +619,7 @@
}
/* ICH7-10 has the same common LPC generic IO decode registers */
-static void __devinit quirk_ich7_lpc(struct pci_dev *dev)
+static void quirk_ich7_lpc(struct pci_dev *dev)
{
/* We share the common ACPI/GPIO decode with ICH6 */
ich6_lpc_acpi_gpio(dev);
@@ -648,7 +648,7 @@
* VIA ACPI: One IO region pointed to by longword at
* 0x48 or 0x20 (256 bytes of ACPI registers)
*/
-static void __devinit quirk_vt82c586_acpi(struct pci_dev *dev)
+static void quirk_vt82c586_acpi(struct pci_dev *dev)
{
u32 region;
@@ -666,7 +666,7 @@
* 0x70 (128 bytes of hardware monitoring register)
* 0x90 (16 bytes of SMB registers)
*/
-static void __devinit quirk_vt82c686_acpi(struct pci_dev *dev)
+static void quirk_vt82c686_acpi(struct pci_dev *dev)
{
u16 hm;
u32 smb;
@@ -688,7 +688,7 @@
* 0x88 (128 bytes of power management registers)
* 0xd0 (16 bytes of SMB registers)
*/
-static void __devinit quirk_vt8235_acpi(struct pci_dev *dev)
+static void quirk_vt8235_acpi(struct pci_dev *dev)
{
u16 pm, smb;
@@ -706,7 +706,7 @@
* TI XIO2000a PCIe-PCI Bridge erroneously reports it supports fast back-to-back:
* Disable fast back-to-back on the secondary bus segment
*/
-static void __devinit quirk_xio2000a(struct pci_dev *dev)
+static void quirk_xio2000a(struct pci_dev *dev)
{
struct pci_dev *pdev;
u16 command;
@@ -780,7 +780,7 @@
* noapic specified. For the moment we assume it's the erratum. We may be wrong
* of course. However the advice is demonstrably good even if so..
*/
-static void __devinit quirk_amd_ioapic(struct pci_dev *dev)
+static void quirk_amd_ioapic(struct pci_dev *dev)
{
if (dev->revision >= 0x02) {
dev_warn(&dev->dev, "I/O APIC: AMD Erratum #22 may be present. In the event of instability try\n");
@@ -789,7 +789,7 @@
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_VIPER_7410, quirk_amd_ioapic);
-static void __devinit quirk_ioapic_rmw(struct pci_dev *dev)
+static void quirk_ioapic_rmw(struct pci_dev *dev)
{
if (dev->devfn == 0 && dev->bus->number == 0)
sis_apic_bug = 1;
@@ -801,7 +801,7 @@
* Some settings of MMRBC can lead to data corruption so block changes.
* See AMD 8131 HyperTransport PCI-X Tunnel Revision Guide
*/
-static void __devinit quirk_amd_8131_mmrbc(struct pci_dev *dev)
+static void quirk_amd_8131_mmrbc(struct pci_dev *dev)
{
if (dev->subordinate && dev->revision <= 0x12) {
dev_info(&dev->dev, "AMD8131 rev %x detected; "
@@ -819,7 +819,7 @@
* value of the ACPI SCI interrupt is only done for convenience.
* -jgarzik
*/
-static void __devinit quirk_via_acpi(struct pci_dev *d)
+static void quirk_via_acpi(struct pci_dev *d)
{
/*
* VIA ACPI device: SCI IRQ line in PCI config byte 0x42
@@ -926,7 +926,7 @@
* We need to switch it off to be able to recognize the real
* type of the chip.
*/
-static void __devinit quirk_vt82c598_id(struct pci_dev *dev)
+static void quirk_vt82c598_id(struct pci_dev *dev)
{
pci_write_config_byte(dev, 0xfc, 0);
pci_read_config_word(dev, PCI_DEVICE_ID, &dev->device);
@@ -978,7 +978,7 @@
* assigned to it. We force a larger allocation to ensure that
* nothing gets put too close to it.
*/
-static void __devinit quirk_dunord ( struct pci_dev * dev )
+static void quirk_dunord(struct pci_dev *dev)
{
struct resource *r = &dev->resource [1];
r->start = 0;
@@ -992,7 +992,7 @@
* in the ProgIf. Unfortunately, the ProgIf value is wrong - 0x80
* instead of 0x01.
*/
-static void __devinit quirk_transparent_bridge(struct pci_dev *dev)
+static void quirk_transparent_bridge(struct pci_dev *dev)
{
dev->transparent = 1;
}
@@ -1066,7 +1066,7 @@
/*
* Serverworks CSB5 IDE does not fully support native mode
*/
-static void __devinit quirk_svwks_csb5ide(struct pci_dev *pdev)
+static void quirk_svwks_csb5ide(struct pci_dev *pdev)
{
u8 prog;
pci_read_config_byte(pdev, PCI_CLASS_PROG, &prog);
@@ -1082,7 +1082,7 @@
/*
* Intel 82801CAM ICH3-M datasheet says IDE modes must be the same
*/
-static void __devinit quirk_ide_samemode(struct pci_dev *pdev)
+static void quirk_ide_samemode(struct pci_dev *pdev)
{
u8 prog;
@@ -1101,7 +1101,7 @@
* Some ATA devices break if put into D3
*/
-static void __devinit quirk_no_ata_d3(struct pci_dev *pdev)
+static void quirk_no_ata_d3(struct pci_dev *pdev)
{
pdev->dev_flags |= PCI_DEV_FLAGS_NO_D3;
}
@@ -1121,7 +1121,7 @@
/* This was originally an Alpha specific thing, but it really fits here.
* The i82375 PCI/EISA bridge appears as non-classified. Fix that.
*/
-static void __devinit quirk_eisa_bridge(struct pci_dev *dev)
+static void quirk_eisa_bridge(struct pci_dev *dev)
{
dev->class = PCI_CLASS_BRIDGE_EISA << 8;
}
@@ -1155,7 +1155,7 @@
*/
static int asus_hides_smbus;
-static void __devinit asus_hides_smbus_hostbridge(struct pci_dev *dev)
+static void asus_hides_smbus_hostbridge(struct pci_dev *dev)
{
if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_ASUSTEK)) {
if (dev->device == PCI_DEVICE_ID_INTEL_82845_HB)
@@ -1538,7 +1538,7 @@
#endif
#ifdef CONFIG_X86_IO_APIC
-static void __devinit quirk_alder_ioapic(struct pci_dev *pdev)
+static void quirk_alder_ioapic(struct pci_dev *pdev)
{
int i;
@@ -1561,7 +1561,7 @@
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_EESSC, quirk_alder_ioapic);
#endif
-static void __devinit quirk_pcie_mch(struct pci_dev *pdev)
+static void quirk_pcie_mch(struct pci_dev *pdev)
{
pci_msi_off(pdev);
pdev->no_msi = 1;
@@ -1575,7 +1575,7 @@
* It's possible for the MSI to get corrupted if shpc and acpi
* are used together on certain PXH-based systems.
*/
-static void __devinit quirk_pcie_pxh(struct pci_dev *dev)
+static void quirk_pcie_pxh(struct pci_dev *dev)
{
pci_msi_off(dev);
dev->no_msi = 1;
@@ -1777,7 +1777,7 @@
* but the PIO transfers won't work if BAR0 falls at the odd 8 bytes.
* Re-allocate the region if needed...
*/
-static void __devinit quirk_tc86c001_ide(struct pci_dev *dev)
+static void quirk_tc86c001_ide(struct pci_dev *dev)
{
struct resource *r = &dev->resource[0];
@@ -1790,7 +1790,7 @@
PCI_DEVICE_ID_TOSHIBA_TC86C001_IDE,
quirk_tc86c001_ide);
-static void __devinit quirk_netmos(struct pci_dev *dev)
+static void quirk_netmos(struct pci_dev *dev)
{
unsigned int num_parallel = (dev->subsystem_device & 0xf0) >> 4;
unsigned int num_serial = dev->subsystem_device & 0xf;
@@ -1828,7 +1828,7 @@
DECLARE_PCI_FIXUP_CLASS_HEADER(PCI_VENDOR_ID_NETMOS, PCI_ANY_ID,
PCI_CLASS_COMMUNICATION_SERIAL, 8, quirk_netmos);
-static void __devinit quirk_e100_interrupt(struct pci_dev *dev)
+static void quirk_e100_interrupt(struct pci_dev *dev)
{
u16 command, pmcsr;
u8 __iomem *csr;
@@ -1901,7 +1901,7 @@
* The 82575 and 82598 may experience data corruption issues when transitioning
* out of L0S. To prevent this we need to disable L0S on the pci-e link
*/
-static void __devinit quirk_disable_aspm_l0s(struct pci_dev *dev)
+static void quirk_disable_aspm_l0s(struct pci_dev *dev)
{
dev_info(&dev->dev, "Disabling L0s\n");
pci_disable_link_state(dev, PCIE_LINK_STATE_L0S);
@@ -1921,7 +1921,7 @@
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10f4, quirk_disable_aspm_l0s);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1508, quirk_disable_aspm_l0s);
-static void __devinit fixup_rev1_53c810(struct pci_dev* dev)
+static void fixup_rev1_53c810(struct pci_dev *dev)
{
/* rev 1 ncr53c810 chips don't set the class at all which means
* they don't get their resources remapped. Fix that here.
@@ -1935,7 +1935,7 @@
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C810, fixup_rev1_53c810);
/* Enable 1k I/O space granularity on the Intel P64H2 */
-static void __devinit quirk_p64h2_1k_io(struct pci_dev *dev)
+static void quirk_p64h2_1k_io(struct pci_dev *dev)
{
u16 en1k;
@@ -1968,7 +1968,7 @@
DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_CK804_PCIE,
quirk_nvidia_ck804_pcie_aer_ext_cap);
-static void __devinit quirk_via_cx700_pci_parking_caching(struct pci_dev *dev)
+static void quirk_via_cx700_pci_parking_caching(struct pci_dev *dev)
{
/*
* Disable PCI Bus Parking and PCI Master read caching on CX700
@@ -2031,7 +2031,7 @@
* We believe that it is legal to read beyond the end tag and
* therefore the solution is to limit the read/write length.
*/
-static void __devinit quirk_brcm_570x_limit_vpd(struct pci_dev *dev)
+static void quirk_brcm_570x_limit_vpd(struct pci_dev *dev)
{
/*
* Only disable the VPD capability for 5706, 5706S, 5708,
@@ -2091,7 +2091,7 @@
* the DRBs - this is where we expose device 6.
* http://www.x86-secret.com/articles/tweak/pat/patsecrets-2.htm
*/
-static void __devinit quirk_unhide_mch_dev6(struct pci_dev *dev)
+static void quirk_unhide_mch_dev6(struct pci_dev *dev)
{
u8 reg;
@@ -2115,7 +2115,7 @@
* supports link speed auto negotiation, but falsely sets
* the link speed to 5GT/s.
*/
-static void __devinit quirk_tile_plx_gen1(struct pci_dev *dev)
+static void quirk_tile_plx_gen1(struct pci_dev *dev)
{
if (tile_plx_gen1) {
pci_write_config_dword(dev, 0x98, 0x1);
@@ -2132,7 +2132,7 @@
* aware of it. Instead of setting the flag on all busses in the
* machine, simply disable MSI globally.
*/
-static void __devinit quirk_disable_all_msi(struct pci_dev *dev)
+static void quirk_disable_all_msi(struct pci_dev *dev)
{
pci_no_msi();
dev_warn(&dev->dev, "MSI quirk detected; MSI disabled\n");
@@ -2146,7 +2146,7 @@
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8380_0, quirk_disable_all_msi);
/* Disable MSI on chipsets that are known to not support it */
-static void __devinit quirk_disable_msi(struct pci_dev *dev)
+static void quirk_disable_msi(struct pci_dev *dev)
{
if (dev->subordinate) {
dev_warn(&dev->dev, "MSI quirk detected; "
@@ -2164,7 +2164,7 @@
* we use the possible vendor/device IDs of the host bridge for the
* declared quirk, and search for the APC bridge by slot number.
*/
-static void __devinit quirk_amd_780_apc_msi(struct pci_dev *host_bridge)
+static void quirk_amd_780_apc_msi(struct pci_dev *host_bridge)
{
struct pci_dev *apc_bridge;
@@ -2272,7 +2272,7 @@
* for the MCP55 NIC. It is not yet determined whether the msi problem
* also affects other devices. As for now, turn off msi for this device.
*/
-static void __devinit nvenet_msi_disable(struct pci_dev *dev)
+static void nvenet_msi_disable(struct pci_dev *dev)
{
const char *board_name = dmi_get_system_info(DMI_BOARD_NAME);
@@ -2298,7 +2298,7 @@
* we have it set correctly.
* Note this is an undocumented register.
*/
-static void __devinit nvbridge_check_legacy_irq_routing(struct pci_dev *dev)
+static void nvbridge_check_legacy_irq_routing(struct pci_dev *dev)
{
u32 cfg;
@@ -2534,11 +2534,11 @@
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_ANY_ID, nv_msi_ht_cap_quirk_all);
DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AL, PCI_ANY_ID, nv_msi_ht_cap_quirk_all);
-static void __devinit quirk_msi_intx_disable_bug(struct pci_dev *dev)
+static void quirk_msi_intx_disable_bug(struct pci_dev *dev)
{
dev->dev_flags |= PCI_DEV_FLAGS_MSI_INTX_DISABLE_BUG;
}
-static void __devinit quirk_msi_intx_disable_ati_bug(struct pci_dev *dev)
+static void quirk_msi_intx_disable_ati_bug(struct pci_dev *dev)
{
struct pci_dev *p;
@@ -2612,7 +2612,7 @@
* kernel fails to allocate resources when hotplug device is
* inserted and PCI bus is rescanned.
*/
-static void __devinit quirk_hotplug_bridge(struct pci_dev *dev)
+static void quirk_hotplug_bridge(struct pci_dev *dev)
{
dev->is_hotplug_bridge = 1;
}
@@ -2752,7 +2752,7 @@
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x3c28, vtd_mask_spec_errors);
#endif
-static void __devinit fixup_ti816x_class(struct pci_dev* dev)
+static void fixup_ti816x_class(struct pci_dev *dev)
{
/* TI 816x devices do not have class code set when in PCIe boot mode */
dev_info(&dev->dev, "Setting PCI class for 816x PCIe device\n");
@@ -2764,7 +2764,7 @@
/* Some PCIe devices do not work reliably with the claimed maximum
* payload size supported.
*/
-static void __devinit fixup_mpss_256(struct pci_dev *dev)
+static void fixup_mpss_256(struct pci_dev *dev)
{
dev->pcie_mpss = 1; /* 256 bytes */
}
@@ -2782,7 +2782,7 @@
* coalescing must be disabled. Unfortunately, it cannot be re-enabled because
* it is possible to hotplug a device with MPS of 256B.
*/
-static void __devinit quirk_intel_mc_errata(struct pci_dev *dev)
+static void quirk_intel_mc_errata(struct pci_dev *dev)
{
int err;
u16 rcc;
@@ -2888,7 +2888,7 @@
* This resolves crashes often seen on monitor unplug.
*/
#define I915_DEIER_REG 0x4400c
-static void __devinit disable_igfx_irq(struct pci_dev *dev)
+static void disable_igfx_irq(struct pci_dev *dev)
{
void __iomem *regs = pci_iomap(dev, 0, 0);
if (regs == NULL) {
@@ -2914,7 +2914,7 @@
* PCI_COMMAND_INTX_DISABLE works though they actually do not properly
* support this feature.
*/
-static void __devinit quirk_broken_intx_masking(struct pci_dev *dev)
+static void quirk_broken_intx_masking(struct pci_dev *dev)
{
dev->broken_intx_masking = 1;
}
diff --git a/drivers/pci/xen-pcifront.c b/drivers/pci/xen-pcifront.c
index 0aab85a..db542f4 100644
--- a/drivers/pci/xen-pcifront.c
+++ b/drivers/pci/xen-pcifront.c
@@ -412,7 +412,7 @@
return 0;
}
-static int __devinit pcifront_scan_bus(struct pcifront_device *pdev,
+static int pcifront_scan_bus(struct pcifront_device *pdev,
unsigned int domain, unsigned int bus,
struct pci_bus *b)
{
@@ -441,7 +441,7 @@
return 0;
}
-static int __devinit pcifront_scan_root(struct pcifront_device *pdev,
+static int pcifront_scan_root(struct pcifront_device *pdev,
unsigned int domain, unsigned int bus)
{
struct pci_bus *b;
@@ -503,7 +503,7 @@
return err;
}
-static int __devinit pcifront_rescan_root(struct pcifront_device *pdev,
+static int pcifront_rescan_root(struct pcifront_device *pdev,
unsigned int domain, unsigned int bus)
{
int err;
@@ -834,7 +834,7 @@
return err;
}
-static int __devinit pcifront_try_connect(struct pcifront_device *pdev)
+static int pcifront_try_connect(struct pcifront_device *pdev)
{
int err = -EFAULT;
int i, num_roots, len;
@@ -924,7 +924,7 @@
return err;
}
-static int __devinit pcifront_attach_devices(struct pcifront_device *pdev)
+static int pcifront_attach_devices(struct pcifront_device *pdev)
{
int err = -EFAULT;
int i, num_roots, len;
diff --git a/drivers/pcmcia/bcm63xx_pcmcia.c b/drivers/pcmcia/bcm63xx_pcmcia.c
index c2e997a..0c6aac1 100644
--- a/drivers/pcmcia/bcm63xx_pcmcia.c
+++ b/drivers/pcmcia/bcm63xx_pcmcia.c
@@ -323,7 +323,7 @@
/*
* register pcmcia socket to core
*/
-static int __devinit bcm63xx_drv_pcmcia_probe(struct platform_device *pdev)
+static int bcm63xx_drv_pcmcia_probe(struct platform_device *pdev)
{
struct bcm63xx_pcmcia_socket *skt;
struct pcmcia_socket *sock;
@@ -436,7 +436,7 @@
return ret;
}
-static int __devexit bcm63xx_drv_pcmcia_remove(struct platform_device *pdev)
+static int bcm63xx_drv_pcmcia_remove(struct platform_device *pdev)
{
struct bcm63xx_pcmcia_socket *skt;
struct resource *res;
@@ -453,7 +453,7 @@
struct platform_driver bcm63xx_pcmcia_driver = {
.probe = bcm63xx_drv_pcmcia_probe,
- .remove = __devexit_p(bcm63xx_drv_pcmcia_remove),
+ .remove = bcm63xx_drv_pcmcia_remove,
.driver = {
.name = "bcm63xx_pcmcia",
.owner = THIS_MODULE,
@@ -461,7 +461,7 @@
};
#ifdef CONFIG_CARDBUS
-static int __devinit bcm63xx_cb_probe(struct pci_dev *dev,
+static int bcm63xx_cb_probe(struct pci_dev *dev,
const struct pci_device_id *id)
{
/* keep pci device */
@@ -469,7 +469,7 @@
return platform_driver_register(&bcm63xx_pcmcia_driver);
}
-static void __devexit bcm63xx_cb_exit(struct pci_dev *dev)
+static void bcm63xx_cb_exit(struct pci_dev *dev)
{
platform_driver_unregister(&bcm63xx_pcmcia_driver);
bcm63xx_cb_dev = NULL;
@@ -503,7 +503,7 @@
.name = "bcm63xx_cardbus",
.id_table = bcm63xx_cb_table,
.probe = bcm63xx_cb_probe,
- .remove = __devexit_p(bcm63xx_cb_exit),
+ .remove = bcm63xx_cb_exit,
};
#endif
diff --git a/drivers/pcmcia/bfin_cf_pcmcia.c b/drivers/pcmcia/bfin_cf_pcmcia.c
index ac1a223..ed3b522 100644
--- a/drivers/pcmcia/bfin_cf_pcmcia.c
+++ b/drivers/pcmcia/bfin_cf_pcmcia.c
@@ -195,7 +195,7 @@
/*--------------------------------------------------------------------------*/
-static int __devinit bfin_cf_probe(struct platform_device *pdev)
+static int bfin_cf_probe(struct platform_device *pdev)
{
struct bfin_cf_socket *cf;
struct resource *io_mem, *attr_mem;
@@ -286,7 +286,7 @@
return status;
}
-static int __devexit bfin_cf_remove(struct platform_device *pdev)
+static int bfin_cf_remove(struct platform_device *pdev)
{
struct bfin_cf_socket *cf = platform_get_drvdata(pdev);
@@ -307,7 +307,7 @@
.owner = THIS_MODULE,
},
.probe = bfin_cf_probe,
- .remove = __devexit_p(bfin_cf_remove),
+ .remove = bfin_cf_remove,
};
module_platform_driver(bfin_cf_driver);
diff --git a/drivers/pcmcia/db1xxx_ss.c b/drivers/pcmcia/db1xxx_ss.c
index a484b1f..a31e69e 100644
--- a/drivers/pcmcia/db1xxx_ss.c
+++ b/drivers/pcmcia/db1xxx_ss.c
@@ -409,7 +409,7 @@
.set_mem_map = au1x00_pcmcia_set_mem_map,
};
-static int __devinit db1x_pcmcia_socket_probe(struct platform_device *pdev)
+static int db1x_pcmcia_socket_probe(struct platform_device *pdev)
{
struct db1x_pcmcia_sock *sock;
struct resource *r;
@@ -559,7 +559,7 @@
return ret;
}
-static int __devexit db1x_pcmcia_socket_remove(struct platform_device *pdev)
+static int db1x_pcmcia_socket_remove(struct platform_device *pdev)
{
struct db1x_pcmcia_sock *sock = platform_get_drvdata(pdev);
@@ -577,7 +577,7 @@
.owner = THIS_MODULE,
},
.probe = db1x_pcmcia_socket_probe,
- .remove = __devexit_p(db1x_pcmcia_socket_remove),
+ .remove = db1x_pcmcia_socket_remove,
};
module_platform_driver(db1x_pcmcia_socket_driver);
diff --git a/drivers/pcmcia/ds.c b/drivers/pcmcia/ds.c
index 079629b..2deacbb 100644
--- a/drivers/pcmcia/ds.c
+++ b/drivers/pcmcia/ds.c
@@ -920,8 +920,6 @@
return 0;
}
-#ifdef CONFIG_HOTPLUG
-
static int pcmcia_bus_uevent(struct device *dev, struct kobj_uevent_env *env)
{
struct pcmcia_device *p_dev;
@@ -962,15 +960,6 @@
return 0;
}
-#else
-
-static int pcmcia_bus_uevent(struct device *dev, struct kobj_uevent_env *env)
-{
- return -ENODEV;
-}
-
-#endif
-
/************************ runtime PM support ***************************/
static int pcmcia_dev_suspend(struct device *dev, pm_message_t state);
@@ -1329,7 +1318,7 @@
.resume = pcmcia_bus_resume,
};
-static int __devinit pcmcia_bus_add_socket(struct device *dev,
+static int pcmcia_bus_add_socket(struct device *dev,
struct class_interface *class_intf)
{
struct pcmcia_socket *socket = dev_get_drvdata(dev);
diff --git a/drivers/pcmcia/electra_cf.c b/drivers/pcmcia/electra_cf.c
index 7647d23..a007321a 100644
--- a/drivers/pcmcia/electra_cf.c
+++ b/drivers/pcmcia/electra_cf.c
@@ -181,7 +181,7 @@
.set_mem_map = electra_cf_set_mem_map,
};
-static int __devinit electra_cf_probe(struct platform_device *ofdev)
+static int electra_cf_probe(struct platform_device *ofdev)
{
struct device *device = &ofdev->dev;
struct device_node *np = ofdev->dev.of_node;
@@ -324,7 +324,7 @@
}
-static int __devexit electra_cf_remove(struct platform_device *ofdev)
+static int electra_cf_remove(struct platform_device *ofdev)
{
struct device *device = &ofdev->dev;
struct electra_cf_socket *cf;
diff --git a/drivers/pcmcia/i82092.c b/drivers/pcmcia/i82092.c
index 4e8831b..3578e1c 100644
--- a/drivers/pcmcia/i82092.c
+++ b/drivers/pcmcia/i82092.c
@@ -35,7 +35,7 @@
.name = "i82092aa",
.id_table = i82092aa_pci_ids,
.probe = i82092aa_pci_probe,
- .remove = __devexit_p(i82092aa_pci_remove),
+ .remove = i82092aa_pci_remove,
};
@@ -67,7 +67,7 @@
static int socket_count; /* shortcut */
-static int __devinit i82092aa_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
+static int i82092aa_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
{
unsigned char configbyte;
int i, ret;
@@ -162,7 +162,7 @@
return ret;
}
-static void __devexit i82092aa_pci_remove(struct pci_dev *dev)
+static void i82092aa_pci_remove(struct pci_dev *dev)
{
struct pcmcia_socket *socket = pci_get_drvdata(dev);
diff --git a/drivers/pcmcia/pd6729.c b/drivers/pcmcia/pd6729.c
index 253e386..b29d97e 100644
--- a/drivers/pcmcia/pd6729.c
+++ b/drivers/pcmcia/pd6729.c
@@ -589,7 +589,7 @@
return 0;
}
-static u_int __devinit pd6729_isa_scan(void)
+static u_int pd6729_isa_scan(void)
{
u_int mask0, mask = 0;
int i;
@@ -620,7 +620,7 @@
return mask;
}
-static int __devinit pd6729_pci_probe(struct pci_dev *dev,
+static int pd6729_pci_probe(struct pci_dev *dev,
const struct pci_device_id *id)
{
int i, j, ret;
@@ -739,7 +739,7 @@
return ret;
}
-static void __devexit pd6729_pci_remove(struct pci_dev *dev)
+static void pd6729_pci_remove(struct pci_dev *dev)
{
int i;
struct pd6729_socket *socket = pci_get_drvdata(dev);
@@ -772,7 +772,7 @@
.name = "pd6729",
.id_table = pd6729_pci_ids,
.probe = pd6729_pci_probe,
- .remove = __devexit_p(pd6729_pci_remove),
+ .remove = pd6729_pci_remove,
};
static int pd6729_module_init(void)
diff --git a/drivers/pcmcia/pxa2xx_sharpsl.c b/drivers/pcmcia/pxa2xx_sharpsl.c
index 7dd879c..89ebd8c 100644
--- a/drivers/pcmcia/pxa2xx_sharpsl.c
+++ b/drivers/pcmcia/pxa2xx_sharpsl.c
@@ -208,7 +208,7 @@
#ifdef CONFIG_SA1100_COLLIE
#include "sa11xx_base.h"
-int __devinit pcmcia_collie_init(struct device *dev)
+int pcmcia_collie_init(struct device *dev)
{
int ret = -ENODEV;
diff --git a/drivers/pcmcia/rsrc_nonstatic.c b/drivers/pcmcia/rsrc_nonstatic.c
index 9da9656..430a9ac 100644
--- a/drivers/pcmcia/rsrc_nonstatic.c
+++ b/drivers/pcmcia/rsrc_nonstatic.c
@@ -1199,7 +1199,7 @@
.attrs = pccard_rsrc_attributes,
};
-static int __devinit pccard_sysfs_add_rsrc(struct device *dev,
+static int pccard_sysfs_add_rsrc(struct device *dev,
struct class_interface *class_intf)
{
struct pcmcia_socket *s = dev_get_drvdata(dev);
@@ -1209,7 +1209,7 @@
return sysfs_create_group(&dev->kobj, &rsrc_attributes);
}
-static void __devexit pccard_sysfs_remove_rsrc(struct device *dev,
+static void pccard_sysfs_remove_rsrc(struct device *dev,
struct class_interface *class_intf)
{
struct pcmcia_socket *s = dev_get_drvdata(dev);
@@ -1222,7 +1222,7 @@
static struct class_interface pccard_rsrc_interface __refdata = {
.class = &pcmcia_socket_class,
.add_dev = &pccard_sysfs_add_rsrc,
- .remove_dev = __devexit_p(&pccard_sysfs_remove_rsrc),
+ .remove_dev = &pccard_sysfs_remove_rsrc,
};
static int __init nonstatic_sysfs_init(void)
diff --git a/drivers/pcmcia/sa1100_assabet.c b/drivers/pcmcia/sa1100_assabet.c
index ba8557e..44cfc44 100644
--- a/drivers/pcmcia/sa1100_assabet.c
+++ b/drivers/pcmcia/sa1100_assabet.c
@@ -95,7 +95,7 @@
.socket_suspend = assabet_pcmcia_socket_suspend,
};
-int __devinit pcmcia_assabet_init(struct device *dev)
+int pcmcia_assabet_init(struct device *dev)
{
int ret = -ENODEV;
diff --git a/drivers/pcmcia/sa1100_cerf.c b/drivers/pcmcia/sa1100_cerf.c
index c59c449..b3774e5 100644
--- a/drivers/pcmcia/sa1100_cerf.c
+++ b/drivers/pcmcia/sa1100_cerf.c
@@ -81,7 +81,7 @@
.configure_socket = cerf_pcmcia_configure_socket,
};
-int __devinit pcmcia_cerf_init(struct device *dev)
+int pcmcia_cerf_init(struct device *dev)
{
int ret = -ENODEV;
diff --git a/drivers/pcmcia/sa1100_generic.c b/drivers/pcmcia/sa1100_generic.c
index 2eea664..ff8a027 100644
--- a/drivers/pcmcia/sa1100_generic.c
+++ b/drivers/pcmcia/sa1100_generic.c
@@ -43,7 +43,7 @@
int __init pcmcia_collie_init(struct device *dev);
-static int (*sa11x0_pcmcia_hw_init[])(struct device *dev) __devinitdata = {
+static int (*sa11x0_pcmcia_hw_init[])(struct device *dev) = {
#ifdef CONFIG_SA1100_ASSABET
pcmcia_assabet_init,
#endif
@@ -67,7 +67,7 @@
#endif
};
-static int __devinit sa11x0_drv_pcmcia_probe(struct platform_device *dev)
+static int sa11x0_drv_pcmcia_probe(struct platform_device *dev)
{
int i, ret = -ENODEV;
diff --git a/drivers/pcmcia/sa1100_h3600.c b/drivers/pcmcia/sa1100_h3600.c
index d9c7337..431d8b0 100644
--- a/drivers/pcmcia/sa1100_h3600.c
+++ b/drivers/pcmcia/sa1100_h3600.c
@@ -153,7 +153,7 @@
.socket_suspend = h3600_pcmcia_socket_suspend,
};
-int __devinit pcmcia_h3600_init(struct device *dev)
+int pcmcia_h3600_init(struct device *dev)
{
int ret = -ENODEV;
diff --git a/drivers/pcmcia/sa1100_shannon.c b/drivers/pcmcia/sa1100_shannon.c
index 56ab739..b07a2dc3 100644
--- a/drivers/pcmcia/sa1100_shannon.c
+++ b/drivers/pcmcia/sa1100_shannon.c
@@ -92,7 +92,7 @@
.configure_socket = shannon_pcmcia_configure_socket,
};
-int __devinit pcmcia_shannon_init(struct device *dev)
+int pcmcia_shannon_init(struct device *dev)
{
int ret = -ENODEV;
diff --git a/drivers/pcmcia/sa1100_simpad.c b/drivers/pcmcia/sa1100_simpad.c
index 8647b17..73fd379 100644
--- a/drivers/pcmcia/sa1100_simpad.c
+++ b/drivers/pcmcia/sa1100_simpad.c
@@ -109,7 +109,7 @@
.socket_suspend = simpad_pcmcia_socket_suspend,
};
-int __devinit pcmcia_simpad_init(struct device *dev)
+int pcmcia_simpad_init(struct device *dev)
{
int ret = -ENODEV;
diff --git a/drivers/pcmcia/sa1111_generic.c b/drivers/pcmcia/sa1111_generic.c
index 70f728c..65b02c3 100644
--- a/drivers/pcmcia/sa1111_generic.c
+++ b/drivers/pcmcia/sa1111_generic.c
@@ -211,7 +211,7 @@
return 0;
}
-static int __devexit pcmcia_remove(struct sa1111_dev *dev)
+static int pcmcia_remove(struct sa1111_dev *dev)
{
struct sa1111_pcmcia_socket *next, *s = dev_get_drvdata(&dev->dev);
@@ -234,7 +234,7 @@
},
.devid = SA1111_DEVID_PCMCIA,
.probe = pcmcia_probe,
- .remove = __devexit_p(pcmcia_remove),
+ .remove = pcmcia_remove,
};
static int __init sa1111_drv_pcmcia_init(void)
diff --git a/drivers/pcmcia/sa1111_jornada720.c b/drivers/pcmcia/sa1111_jornada720.c
index 69428d1..3baa3ef 100644
--- a/drivers/pcmcia/sa1111_jornada720.c
+++ b/drivers/pcmcia/sa1111_jornada720.c
@@ -91,7 +91,7 @@
.nr = 2,
};
-int __devinit pcmcia_jornada720_init(struct device *dev)
+int pcmcia_jornada720_init(struct device *dev)
{
int ret = -ENODEV;
diff --git a/drivers/pcmcia/vrc4171_card.c b/drivers/pcmcia/vrc4171_card.c
index 86e4a1a..75806be 100644
--- a/drivers/pcmcia/vrc4171_card.c
+++ b/drivers/pcmcia/vrc4171_card.c
@@ -564,7 +564,7 @@
vrc4171_irq_mask &= ~(1 << irq);
}
-static int __devinit vrc4171_add_sockets(void)
+static int vrc4171_add_sockets(void)
{
vrc4171_socket_t *socket;
int slot, retval;
@@ -631,7 +631,7 @@
}
}
-static int __devinit vrc4171_card_setup(char *options)
+static int vrc4171_card_setup(char *options)
{
if (options == NULL || *options == '\0')
return 1;
@@ -712,7 +712,7 @@
},
};
-static int __devinit vrc4171_card_init(void)
+static int vrc4171_card_init(void)
{
int retval;
@@ -746,7 +746,7 @@
return 0;
}
-static void __devexit vrc4171_card_exit(void)
+static void vrc4171_card_exit(void)
{
free_irq(vrc4171_irq, vrc4171_sockets);
vrc4171_remove_sockets();
diff --git a/drivers/pcmcia/vrc4173_cardu.c b/drivers/pcmcia/vrc4173_cardu.c
index cd0a315..d926920 100644
--- a/drivers/pcmcia/vrc4173_cardu.c
+++ b/drivers/pcmcia/vrc4173_cardu.c
@@ -456,7 +456,7 @@
}
}
-static int __devinit vrc4173_cardu_probe(struct pci_dev *dev,
+static int vrc4173_cardu_probe(struct pci_dev *dev,
const struct pci_device_id *ent)
{
vrc4173_socket_t *socket;
@@ -533,7 +533,7 @@
return ret;
}
-static int __devinit vrc4173_cardu_setup(char *options)
+static int vrc4173_cardu_setup(char *options)
{
if (options == NULL || *options == '\0')
return 1;
@@ -574,14 +574,14 @@
.id_table = vrc4173_cardu_id_table,
};
-static int __devinit vrc4173_cardu_init(void)
+static int vrc4173_cardu_init(void)
{
vrc4173_cardu_slots = 0;
return pci_register_driver(&vrc4173_cardu_driver);
}
-static void __devexit vrc4173_cardu_exit(void)
+static void vrc4173_cardu_exit(void)
{
pci_unregister_driver(&vrc4173_cardu_driver);
}
diff --git a/drivers/pcmcia/xxs1500_ss.c b/drivers/pcmcia/xxs1500_ss.c
index fd5fbd1..95f5b27 100644
--- a/drivers/pcmcia/xxs1500_ss.c
+++ b/drivers/pcmcia/xxs1500_ss.c
@@ -204,7 +204,7 @@
.set_mem_map = au1x00_pcmcia_set_mem_map,
};
-static int __devinit xxs1500_pcmcia_probe(struct platform_device *pdev)
+static int xxs1500_pcmcia_probe(struct platform_device *pdev)
{
struct xxs1500_pcmcia_sock *sock;
struct resource *r;
@@ -299,7 +299,7 @@
return ret;
}
-static int __devexit xxs1500_pcmcia_remove(struct platform_device *pdev)
+static int xxs1500_pcmcia_remove(struct platform_device *pdev)
{
struct xxs1500_pcmcia_sock *sock = platform_get_drvdata(pdev);
@@ -317,7 +317,7 @@
.owner = THIS_MODULE,
},
.probe = xxs1500_pcmcia_probe,
- .remove = __devexit_p(xxs1500_pcmcia_remove),
+ .remove = xxs1500_pcmcia_remove,
};
module_platform_driver(xxs1500_pcmcia_socket_driver);
diff --git a/drivers/pcmcia/yenta_socket.c b/drivers/pcmcia/yenta_socket.c
index 667678d..6b4ff09 100644
--- a/drivers/pcmcia/yenta_socket.c
+++ b/drivers/pcmcia/yenta_socket.c
@@ -783,7 +783,7 @@
/*
* Close it down - release our resources and go home..
*/
-static void __devexit yenta_close(struct pci_dev *dev)
+static void yenta_close(struct pci_dev *dev)
{
struct yenta_socket *sock = pci_get_drvdata(dev);
@@ -1142,7 +1142,7 @@
* interrupt, and that we can map the cardbus area. Fill in the
* socket information structure..
*/
-static int __devinit yenta_probe(struct pci_dev *dev, const struct pci_device_id *id)
+static int yenta_probe(struct pci_dev *dev, const struct pci_device_id *id)
{
struct yenta_socket *socket;
int ret;
@@ -1435,7 +1435,7 @@
.name = "yenta_cardbus",
.id_table = yenta_table,
.probe = yenta_probe,
- .remove = __devexit_p(yenta_close),
+ .remove = yenta_close,
.driver.pm = YENTA_PM_OPS,
};
diff --git a/drivers/pinctrl/pinctrl-bcm2835.c b/drivers/pinctrl/pinctrl-bcm2835.c
index 9a963ed..0b0e9b4 100644
--- a/drivers/pinctrl/pinctrl-bcm2835.c
+++ b/drivers/pinctrl/pinctrl-bcm2835.c
@@ -372,7 +372,7 @@
return irq_linear_revmap(pc->irq_domain, offset);
}
-static struct gpio_chip bcm2835_gpio_chip __devinitconst = {
+static struct gpio_chip bcm2835_gpio_chip = {
.label = MODULE_NAME,
.owner = THIS_MODULE,
.request = bcm2835_gpio_request,
@@ -931,7 +931,7 @@
.owner = THIS_MODULE,
};
-static struct pinctrl_gpio_range bcm2835_pinctrl_gpio_range __devinitconst = {
+static struct pinctrl_gpio_range bcm2835_pinctrl_gpio_range = {
.name = MODULE_NAME,
.npins = BCM2835_NUM_GPIOS,
};
@@ -1042,7 +1042,7 @@
return 0;
}
-static int __devexit bcm2835_pinctrl_remove(struct platform_device *pdev)
+static int bcm2835_pinctrl_remove(struct platform_device *pdev)
{
struct bcm2835_pinctrl *pc = platform_get_drvdata(pdev);
@@ -1052,7 +1052,7 @@
return 0;
}
-static struct of_device_id bcm2835_pinctrl_match[] __devinitconst = {
+static struct of_device_id bcm2835_pinctrl_match[] = {
{ .compatible = "brcm,bcm2835-gpio" },
{}
};
diff --git a/drivers/pinctrl/pinctrl-imx.c b/drivers/pinctrl/pinctrl-imx.c
index 525a2c8..131d86d 100644
--- a/drivers/pinctrl/pinctrl-imx.c
+++ b/drivers/pinctrl/pinctrl-imx.c
@@ -611,7 +611,7 @@
return 0;
}
-int __devexit imx_pinctrl_remove(struct platform_device *pdev)
+int imx_pinctrl_remove(struct platform_device *pdev)
{
struct imx_pinctrl *ipctl = platform_get_drvdata(pdev);
diff --git a/drivers/pinctrl/pinctrl-imx23.c b/drivers/pinctrl/pinctrl-imx23.c
index 3674d87..04364f7 100644
--- a/drivers/pinctrl/pinctrl-imx23.c
+++ b/drivers/pinctrl/pinctrl-imx23.c
@@ -272,7 +272,7 @@
return mxs_pinctrl_probe(pdev, &imx23_pinctrl_data);
}
-static struct of_device_id imx23_pinctrl_of_match[] __devinitdata = {
+static struct of_device_id imx23_pinctrl_of_match[] = {
{ .compatible = "fsl,imx23-pinctrl", },
{ /* sentinel */ }
};
@@ -285,7 +285,7 @@
.of_match_table = imx23_pinctrl_of_match,
},
.probe = imx23_pinctrl_probe,
- .remove = __devexit_p(mxs_pinctrl_remove),
+ .remove = mxs_pinctrl_remove,
};
static int __init imx23_pinctrl_init(void)
diff --git a/drivers/pinctrl/pinctrl-imx28.c b/drivers/pinctrl/pinctrl-imx28.c
index 0f5b212..e1af2ba 100644
--- a/drivers/pinctrl/pinctrl-imx28.c
+++ b/drivers/pinctrl/pinctrl-imx28.c
@@ -388,7 +388,7 @@
return mxs_pinctrl_probe(pdev, &imx28_pinctrl_data);
}
-static struct of_device_id imx28_pinctrl_of_match[] __devinitdata = {
+static struct of_device_id imx28_pinctrl_of_match[] = {
{ .compatible = "fsl,imx28-pinctrl", },
{ /* sentinel */ }
};
@@ -401,7 +401,7 @@
.of_match_table = imx28_pinctrl_of_match,
},
.probe = imx28_pinctrl_probe,
- .remove = __devexit_p(mxs_pinctrl_remove),
+ .remove = mxs_pinctrl_remove,
};
static int __init imx28_pinctrl_init(void)
diff --git a/drivers/pinctrl/pinctrl-imx35.c b/drivers/pinctrl/pinctrl-imx35.c
index 82f109e..1dbf5278 100644
--- a/drivers/pinctrl/pinctrl-imx35.c
+++ b/drivers/pinctrl/pinctrl-imx35.c
@@ -1559,7 +1559,7 @@
.npin_regs = ARRAY_SIZE(imx35_pin_regs),
};
-static struct of_device_id imx35_pinctrl_of_match[] __devinitdata = {
+static struct of_device_id imx35_pinctrl_of_match[] = {
{ .compatible = "fsl,imx35-iomuxc", },
{ /* sentinel */ }
};
@@ -1576,7 +1576,7 @@
.of_match_table = of_match_ptr(imx35_pinctrl_of_match),
},
.probe = imx35_pinctrl_probe,
- .remove = __devexit_p(imx_pinctrl_remove),
+ .remove = imx_pinctrl_remove,
};
static int __init imx35_pinctrl_init(void)
diff --git a/drivers/pinctrl/pinctrl-imx51.c b/drivers/pinctrl/pinctrl-imx51.c
index fb84689..1312165 100644
--- a/drivers/pinctrl/pinctrl-imx51.c
+++ b/drivers/pinctrl/pinctrl-imx51.c
@@ -1286,7 +1286,7 @@
.npin_regs = ARRAY_SIZE(imx51_pin_regs),
};
-static struct of_device_id imx51_pinctrl_of_match[] __devinitdata = {
+static struct of_device_id imx51_pinctrl_of_match[] = {
{ .compatible = "fsl,imx51-iomuxc", },
{ /* sentinel */ }
};
@@ -1303,7 +1303,7 @@
.of_match_table = of_match_ptr(imx51_pinctrl_of_match),
},
.probe = imx51_pinctrl_probe,
- .remove = __devexit_p(imx_pinctrl_remove),
+ .remove = imx_pinctrl_remove,
};
static int __init imx51_pinctrl_init(void)
diff --git a/drivers/pinctrl/pinctrl-imx53.c b/drivers/pinctrl/pinctrl-imx53.c
index 783feb1..ec40486 100644
--- a/drivers/pinctrl/pinctrl-imx53.c
+++ b/drivers/pinctrl/pinctrl-imx53.c
@@ -1613,7 +1613,7 @@
.npin_regs = ARRAY_SIZE(imx53_pin_regs),
};
-static struct of_device_id imx53_pinctrl_of_match[] __devinitdata = {
+static struct of_device_id imx53_pinctrl_of_match[] = {
{ .compatible = "fsl,imx53-iomuxc", },
{ /* sentinel */ }
};
@@ -1630,7 +1630,7 @@
.of_match_table = of_match_ptr(imx53_pinctrl_of_match),
},
.probe = imx53_pinctrl_probe,
- .remove = __devexit_p(imx_pinctrl_remove),
+ .remove = imx_pinctrl_remove,
};
static int __init imx53_pinctrl_init(void)
diff --git a/drivers/pinctrl/pinctrl-imx6q.c b/drivers/pinctrl/pinctrl-imx6q.c
index e9bf71f..844ab13 100644
--- a/drivers/pinctrl/pinctrl-imx6q.c
+++ b/drivers/pinctrl/pinctrl-imx6q.c
@@ -2297,7 +2297,7 @@
.npin_regs = ARRAY_SIZE(imx6q_pin_regs),
};
-static struct of_device_id imx6q_pinctrl_of_match[] __devinitdata = {
+static struct of_device_id imx6q_pinctrl_of_match[] = {
{ .compatible = "fsl,imx6q-iomuxc", },
{ /* sentinel */ }
};
@@ -2314,7 +2314,7 @@
.of_match_table = of_match_ptr(imx6q_pinctrl_of_match),
},
.probe = imx6q_pinctrl_probe,
- .remove = __devexit_p(imx_pinctrl_remove),
+ .remove = imx_pinctrl_remove,
};
static int __init imx6q_pinctrl_init(void)
diff --git a/drivers/pinctrl/pinctrl-mmp2.c b/drivers/pinctrl/pinctrl-mmp2.c
index 2cfed55..4fbb3db 100644
--- a/drivers/pinctrl/pinctrl-mmp2.c
+++ b/drivers/pinctrl/pinctrl-mmp2.c
@@ -691,7 +691,7 @@
return pxa3xx_pinctrl_register(pdev, &mmp2_info);
}
-static int __devexit mmp2_pinmux_remove(struct platform_device *pdev)
+static int mmp2_pinmux_remove(struct platform_device *pdev)
{
return pxa3xx_pinctrl_unregister(pdev);
}
@@ -702,7 +702,7 @@
.owner = THIS_MODULE,
},
.probe = mmp2_pinmux_probe,
- .remove = __devexit_p(mmp2_pinmux_remove),
+ .remove = mmp2_pinmux_remove,
};
static int __init mmp2_pinmux_init(void)
diff --git a/drivers/pinctrl/pinctrl-mxs.c b/drivers/pinctrl/pinctrl-mxs.c
index 3e7d4d6..180f163 100644
--- a/drivers/pinctrl/pinctrl-mxs.c
+++ b/drivers/pinctrl/pinctrl-mxs.c
@@ -522,7 +522,7 @@
}
EXPORT_SYMBOL_GPL(mxs_pinctrl_probe);
-int __devexit mxs_pinctrl_remove(struct platform_device *pdev)
+int mxs_pinctrl_remove(struct platform_device *pdev)
{
struct mxs_pinctrl_data *d = platform_get_drvdata(pdev);
diff --git a/drivers/pinctrl/pinctrl-pxa168.c b/drivers/pinctrl/pinctrl-pxa168.c
index c1997fa..cb771e4 100644
--- a/drivers/pinctrl/pinctrl-pxa168.c
+++ b/drivers/pinctrl/pinctrl-pxa168.c
@@ -620,7 +620,7 @@
return pxa3xx_pinctrl_register(pdev, &pxa168_info);
}
-static int __devexit pxa168_pinmux_remove(struct platform_device *pdev)
+static int pxa168_pinmux_remove(struct platform_device *pdev)
{
return pxa3xx_pinctrl_unregister(pdev);
}
@@ -631,7 +631,7 @@
.owner = THIS_MODULE,
},
.probe = pxa168_pinmux_probe,
- .remove = __devexit_p(pxa168_pinmux_remove),
+ .remove = pxa168_pinmux_remove,
};
static int __init pxa168_pinmux_init(void)
diff --git a/drivers/pinctrl/pinctrl-pxa910.c b/drivers/pinctrl/pinctrl-pxa910.c
index c72ab4b..5fecd22 100644
--- a/drivers/pinctrl/pinctrl-pxa910.c
+++ b/drivers/pinctrl/pinctrl-pxa910.c
@@ -976,7 +976,7 @@
return pxa3xx_pinctrl_register(pdev, &pxa910_info);
}
-static int __devexit pxa910_pinmux_remove(struct platform_device *pdev)
+static int pxa910_pinmux_remove(struct platform_device *pdev)
{
return pxa3xx_pinctrl_unregister(pdev);
}
@@ -987,7 +987,7 @@
.owner = THIS_MODULE,
},
.probe = pxa910_pinmux_probe,
- .remove = __devexit_p(pxa910_pinmux_remove),
+ .remove = pxa910_pinmux_remove,
};
static int __init pxa910_pinmux_init(void)
diff --git a/drivers/pinctrl/pinctrl-single.c b/drivers/pinctrl/pinctrl-single.c
index 5549463..7964283 100644
--- a/drivers/pinctrl/pinctrl-single.c
+++ b/drivers/pinctrl/pinctrl-single.c
@@ -1062,7 +1062,7 @@
return ret;
}
-static int __devexit pcs_remove(struct platform_device *pdev)
+static int pcs_remove(struct platform_device *pdev)
{
struct pcs_device *pcs = platform_get_drvdata(pdev);
@@ -1074,7 +1074,7 @@
return 0;
}
-static struct of_device_id pcs_of_match[] __devinitdata = {
+static struct of_device_id pcs_of_match[] = {
{ .compatible = DRIVER_NAME, },
{ },
};
@@ -1082,7 +1082,7 @@
static struct platform_driver pcs_driver = {
.probe = pcs_probe,
- .remove = __devexit_p(pcs_remove),
+ .remove = pcs_remove,
.driver = {
.owner = THIS_MODULE,
.name = DRIVER_NAME,
diff --git a/drivers/pinctrl/pinctrl-sirf.c b/drivers/pinctrl/pinctrl-sirf.c
index a3905e5..a4f0c5e4 100644
--- a/drivers/pinctrl/pinctrl-sirf.c
+++ b/drivers/pinctrl/pinctrl-sirf.c
@@ -1305,7 +1305,7 @@
return ret;
}
-static const struct of_device_id pinmux_ids[] __devinitconst = {
+static const struct of_device_id pinmux_ids[] = {
{ .compatible = "sirf,prima2-pinctrl" },
{ .compatible = "sirf,marco-pinctrl" },
{}
diff --git a/drivers/pinctrl/pinctrl-tegra.c b/drivers/pinctrl/pinctrl-tegra.c
index e9f80a5..e356b03 100644
--- a/drivers/pinctrl/pinctrl-tegra.c
+++ b/drivers/pinctrl/pinctrl-tegra.c
@@ -760,7 +760,7 @@
}
EXPORT_SYMBOL_GPL(tegra_pinctrl_probe);
-int __devexit tegra_pinctrl_remove(struct platform_device *pdev)
+int tegra_pinctrl_remove(struct platform_device *pdev)
{
struct tegra_pmx *pmx = platform_get_drvdata(pdev);
diff --git a/drivers/pinctrl/pinctrl-tegra20.c b/drivers/pinctrl/pinctrl-tegra20.c
index a74f9a5..1524bfd 100644
--- a/drivers/pinctrl/pinctrl-tegra20.c
+++ b/drivers/pinctrl/pinctrl-tegra20.c
@@ -2861,7 +2861,7 @@
return tegra_pinctrl_probe(pdev, &tegra20_pinctrl);
}
-static struct of_device_id tegra20_pinctrl_of_match[] __devinitdata = {
+static struct of_device_id tegra20_pinctrl_of_match[] = {
{ .compatible = "nvidia,tegra20-pinmux", },
{ },
};
@@ -2873,7 +2873,7 @@
.of_match_table = tegra20_pinctrl_of_match,
},
.probe = tegra20_pinctrl_probe,
- .remove = __devexit_p(tegra_pinctrl_remove),
+ .remove = tegra_pinctrl_remove,
};
static int __init tegra20_pinctrl_init(void)
diff --git a/drivers/pinctrl/pinctrl-tegra30.c b/drivers/pinctrl/pinctrl-tegra30.c
index 7894f14..cf579eb 100644
--- a/drivers/pinctrl/pinctrl-tegra30.c
+++ b/drivers/pinctrl/pinctrl-tegra30.c
@@ -3727,7 +3727,7 @@
return tegra_pinctrl_probe(pdev, &tegra30_pinctrl);
}
-static struct of_device_id tegra30_pinctrl_of_match[] __devinitdata = {
+static struct of_device_id tegra30_pinctrl_of_match[] = {
{ .compatible = "nvidia,tegra30-pinmux", },
{ },
};
@@ -3739,7 +3739,7 @@
.of_match_table = tegra30_pinctrl_of_match,
},
.probe = tegra30_pinctrl_probe,
- .remove = __devexit_p(tegra_pinctrl_remove),
+ .remove = tegra_pinctrl_remove,
};
static int __init tegra30_pinctrl_init(void)
diff --git a/drivers/pinctrl/pinctrl-u300.c b/drivers/pinctrl/pinctrl-u300.c
index b84de03..8c039ad 100644
--- a/drivers/pinctrl/pinctrl-u300.c
+++ b/drivers/pinctrl/pinctrl-u300.c
@@ -1095,7 +1095,7 @@
return 0;
}
-static int __devexit u300_pmx_remove(struct platform_device *pdev)
+static int u300_pmx_remove(struct platform_device *pdev)
{
struct u300_pmx *upmx = platform_get_drvdata(pdev);
@@ -1111,7 +1111,7 @@
.owner = THIS_MODULE,
},
.probe = u300_pmx_probe,
- .remove = __devexit_p(u300_pmx_remove),
+ .remove = u300_pmx_remove,
};
static int __init u300_pmx_init(void)
diff --git a/drivers/pinctrl/spear/pinctrl-spear.c b/drivers/pinctrl/spear/pinctrl-spear.c
index bf78eb7..922c057 100644
--- a/drivers/pinctrl/spear/pinctrl-spear.c
+++ b/drivers/pinctrl/spear/pinctrl-spear.c
@@ -417,7 +417,7 @@
return 0;
}
-int __devexit spear_pinctrl_remove(struct platform_device *pdev)
+int spear_pinctrl_remove(struct platform_device *pdev)
{
struct spear_pmx *pmx = platform_get_drvdata(pdev);
diff --git a/drivers/pinctrl/spear/pinctrl-spear.h b/drivers/pinctrl/spear/pinctrl-spear.h
index b063327..1be46ec 100644
--- a/drivers/pinctrl/spear/pinctrl-spear.h
+++ b/drivers/pinctrl/spear/pinctrl-spear.h
@@ -198,7 +198,7 @@
unsigned count, u16 reg);
int __devinit spear_pinctrl_probe(struct platform_device *pdev,
struct spear_pinctrl_machdata *machdata);
-int __devexit spear_pinctrl_remove(struct platform_device *pdev);
+int spear_pinctrl_remove(struct platform_device *pdev);
#define SPEAR_PIN_0_TO_101 \
PINCTRL_PIN(0, "PLGPIO0"), \
diff --git a/drivers/pinctrl/spear/pinctrl-spear1310.c b/drivers/pinctrl/spear/pinctrl-spear1310.c
index 30134f7..e40d785 100644
--- a/drivers/pinctrl/spear/pinctrl-spear1310.c
+++ b/drivers/pinctrl/spear/pinctrl-spear1310.c
@@ -2692,7 +2692,7 @@
.modes_supported = false,
};
-static struct of_device_id spear1310_pinctrl_of_match[] __devinitdata = {
+static struct of_device_id spear1310_pinctrl_of_match[] = {
{
.compatible = "st,spear1310-pinmux",
},
@@ -2704,7 +2704,7 @@
return spear_pinctrl_probe(pdev, &spear1310_machdata);
}
-static int __devexit spear1310_pinctrl_remove(struct platform_device *pdev)
+static int spear1310_pinctrl_remove(struct platform_device *pdev)
{
return spear_pinctrl_remove(pdev);
}
@@ -2716,7 +2716,7 @@
.of_match_table = spear1310_pinctrl_of_match,
},
.probe = spear1310_pinctrl_probe,
- .remove = __devexit_p(spear1310_pinctrl_remove),
+ .remove = spear1310_pinctrl_remove,
};
static int __init spear1310_pinctrl_init(void)
diff --git a/drivers/pinctrl/spear/pinctrl-spear1340.c b/drivers/pinctrl/spear/pinctrl-spear1340.c
index 0b4af0e..8deaaff 100644
--- a/drivers/pinctrl/spear/pinctrl-spear1340.c
+++ b/drivers/pinctrl/spear/pinctrl-spear1340.c
@@ -2008,7 +2008,7 @@
.modes_supported = false,
};
-static struct of_device_id spear1340_pinctrl_of_match[] __devinitdata = {
+static struct of_device_id spear1340_pinctrl_of_match[] = {
{
.compatible = "st,spear1340-pinmux",
},
@@ -2020,7 +2020,7 @@
return spear_pinctrl_probe(pdev, &spear1340_machdata);
}
-static int __devexit spear1340_pinctrl_remove(struct platform_device *pdev)
+static int spear1340_pinctrl_remove(struct platform_device *pdev)
{
return spear_pinctrl_remove(pdev);
}
@@ -2032,7 +2032,7 @@
.of_match_table = spear1340_pinctrl_of_match,
},
.probe = spear1340_pinctrl_probe,
- .remove = __devexit_p(spear1340_pinctrl_remove),
+ .remove = spear1340_pinctrl_remove,
};
static int __init spear1340_pinctrl_init(void)
diff --git a/drivers/pinctrl/spear/pinctrl-spear300.c b/drivers/pinctrl/spear/pinctrl-spear300.c
index 9a49100..f48e466e 100644
--- a/drivers/pinctrl/spear/pinctrl-spear300.c
+++ b/drivers/pinctrl/spear/pinctrl-spear300.c
@@ -646,7 +646,7 @@
&gpio1_function,
};
-static struct of_device_id spear300_pinctrl_of_match[] __devinitdata = {
+static struct of_device_id spear300_pinctrl_of_match[] = {
{
.compatible = "st,spear300-pinmux",
},
@@ -677,7 +677,7 @@
return 0;
}
-static int __devexit spear300_pinctrl_remove(struct platform_device *pdev)
+static int spear300_pinctrl_remove(struct platform_device *pdev)
{
return spear_pinctrl_remove(pdev);
}
@@ -689,7 +689,7 @@
.of_match_table = spear300_pinctrl_of_match,
},
.probe = spear300_pinctrl_probe,
- .remove = __devexit_p(spear300_pinctrl_remove),
+ .remove = spear300_pinctrl_remove,
};
static int __init spear300_pinctrl_init(void)
diff --git a/drivers/pinctrl/spear/pinctrl-spear310.c b/drivers/pinctrl/spear/pinctrl-spear310.c
index 4d5dfe9..5b954c1 100644
--- a/drivers/pinctrl/spear/pinctrl-spear310.c
+++ b/drivers/pinctrl/spear/pinctrl-spear310.c
@@ -371,7 +371,7 @@
&tdm_function,
};
-static struct of_device_id spear310_pinctrl_of_match[] __devinitdata = {
+static struct of_device_id spear310_pinctrl_of_match[] = {
{
.compatible = "st,spear310-pinmux",
},
@@ -400,7 +400,7 @@
return 0;
}
-static int __devexit spear310_pinctrl_remove(struct platform_device *pdev)
+static int spear310_pinctrl_remove(struct platform_device *pdev)
{
return spear_pinctrl_remove(pdev);
}
@@ -412,7 +412,7 @@
.of_match_table = spear310_pinctrl_of_match,
},
.probe = spear310_pinctrl_probe,
- .remove = __devexit_p(spear310_pinctrl_remove),
+ .remove = spear310_pinctrl_remove,
};
static int __init spear310_pinctrl_init(void)
diff --git a/drivers/pinctrl/spear/pinctrl-spear320.c b/drivers/pinctrl/spear/pinctrl-spear320.c
index c996e26..e9a5e6d 100644
--- a/drivers/pinctrl/spear/pinctrl-spear320.c
+++ b/drivers/pinctrl/spear/pinctrl-spear320.c
@@ -3410,7 +3410,7 @@
&i2c2_function,
};
-static struct of_device_id spear320_pinctrl_of_match[] __devinitdata = {
+static struct of_device_id spear320_pinctrl_of_match[] = {
{
.compatible = "st,spear320-pinmux",
},
@@ -3441,7 +3441,7 @@
return 0;
}
-static int __devexit spear320_pinctrl_remove(struct platform_device *pdev)
+static int spear320_pinctrl_remove(struct platform_device *pdev)
{
return spear_pinctrl_remove(pdev);
}
@@ -3453,7 +3453,7 @@
.of_match_table = spear320_pinctrl_of_match,
},
.probe = spear320_pinctrl_probe,
- .remove = __devexit_p(spear320_pinctrl_remove),
+ .remove = spear320_pinctrl_remove,
};
static int __init spear320_pinctrl_init(void)
diff --git a/drivers/pnp/base.h b/drivers/pnp/base.h
index fa4e0a5..ffd53e3 100644
--- a/drivers/pnp/base.h
+++ b/drivers/pnp/base.h
@@ -159,6 +159,8 @@
void pnp_free_resource(struct pnp_resource *pnp_res);
+struct pnp_resource *pnp_add_resource(struct pnp_dev *dev,
+ struct resource *res);
struct pnp_resource *pnp_add_irq_resource(struct pnp_dev *dev, int irq,
int flags);
struct pnp_resource *pnp_add_dma_resource(struct pnp_dev *dev, int dma,
diff --git a/drivers/pnp/pnpacpi/core.c b/drivers/pnp/pnpacpi/core.c
index 26b5d4b..72e822e 100644
--- a/drivers/pnp/pnpacpi/core.c
+++ b/drivers/pnp/pnpacpi/core.c
@@ -58,7 +58,7 @@
if (!(('0' <= (c) && (c) <= '9') || ('A' <= (c) && (c) <= 'F'))) \
return 0
#define TEST_ALPHA(c) \
- if (!('@' <= (c) || (c) <= 'Z')) \
+ if (!('A' <= (c) && (c) <= 'Z')) \
return 0
static int __init ispnpidacpi(const char *id)
{
@@ -95,6 +95,9 @@
return -ENODEV;
}
+ if (WARN_ON_ONCE(acpi_dev != dev->data))
+ dev->data = acpi_dev;
+
ret = pnpacpi_build_resource_template(dev, &buffer);
if (ret)
return ret;
@@ -242,6 +245,10 @@
char *pnpid;
struct acpi_hardware_id *id;
+ /* Skip devices that are already bound */
+ if (device->physical_node_count)
+ return 0;
+
/*
* If a PnPacpi device is not present , the device
* driver should not be loaded.
diff --git a/drivers/pnp/pnpacpi/rsparser.c b/drivers/pnp/pnpacpi/rsparser.c
index 5be4a39..b8f4ea7 100644
--- a/drivers/pnp/pnpacpi/rsparser.c
+++ b/drivers/pnp/pnpacpi/rsparser.c
@@ -28,37 +28,6 @@
#include "../base.h"
#include "pnpacpi.h"
-#ifdef CONFIG_IA64
-#define valid_IRQ(i) (1)
-#else
-#define valid_IRQ(i) (((i) != 0) && ((i) != 2))
-#endif
-
-/*
- * Allocated Resources
- */
-static int irq_flags(int triggering, int polarity, int shareable)
-{
- int flags;
-
- if (triggering == ACPI_LEVEL_SENSITIVE) {
- if (polarity == ACPI_ACTIVE_LOW)
- flags = IORESOURCE_IRQ_LOWLEVEL;
- else
- flags = IORESOURCE_IRQ_HIGHLEVEL;
- } else {
- if (polarity == ACPI_ACTIVE_LOW)
- flags = IORESOURCE_IRQ_LOWEDGE;
- else
- flags = IORESOURCE_IRQ_HIGHEDGE;
- }
-
- if (shareable == ACPI_SHARED)
- flags |= IORESOURCE_IRQ_SHAREABLE;
-
- return flags;
-}
-
static void decode_irq_flags(struct pnp_dev *dev, int flags, int *triggering,
int *polarity, int *shareable)
{
@@ -94,45 +63,6 @@
*shareable = ACPI_EXCLUSIVE;
}
-static void pnpacpi_parse_allocated_irqresource(struct pnp_dev *dev,
- u32 gsi, int triggering,
- int polarity, int shareable)
-{
- int irq, flags;
- int p, t;
-
- if (!valid_IRQ(gsi)) {
- pnp_add_irq_resource(dev, gsi, IORESOURCE_DISABLED);
- return;
- }
-
- /*
- * in IO-APIC mode, use overrided attribute. Two reasons:
- * 1. BIOS bug in DSDT
- * 2. BIOS uses IO-APIC mode Interrupt Source Override
- */
- if (!acpi_get_override_irq(gsi, &t, &p)) {
- t = t ? ACPI_LEVEL_SENSITIVE : ACPI_EDGE_SENSITIVE;
- p = p ? ACPI_ACTIVE_LOW : ACPI_ACTIVE_HIGH;
-
- if (triggering != t || polarity != p) {
- dev_warn(&dev->dev, "IRQ %d override to %s, %s\n",
- gsi, t ? "edge":"level", p ? "low":"high");
- triggering = t;
- polarity = p;
- }
- }
-
- flags = irq_flags(triggering, polarity, shareable);
- irq = acpi_register_gsi(&dev->dev, gsi, triggering, polarity);
- if (irq >= 0)
- pcibios_penalize_isa_irq(irq, 1);
- else
- flags |= IORESOURCE_DISABLED;
-
- pnp_add_irq_resource(dev, irq, flags);
-}
-
static int dma_flags(struct pnp_dev *dev, int type, int bus_master,
int transfer)
{
@@ -177,21 +107,16 @@
return flags;
}
-static void pnpacpi_parse_allocated_ioresource(struct pnp_dev *dev, u64 start,
- u64 len, int io_decode,
- int window)
+/*
+ * Allocated Resources
+ */
+
+static void pnpacpi_add_irqresource(struct pnp_dev *dev, struct resource *r)
{
- int flags = 0;
- u64 end = start + len - 1;
+ if (!(r->flags & IORESOURCE_DISABLED))
+ pcibios_penalize_isa_irq(r->start, 1);
- if (io_decode == ACPI_DECODE_16)
- flags |= IORESOURCE_IO_16BIT_ADDR;
- if (len == 0 || end >= 0x10003)
- flags |= IORESOURCE_DISABLED;
- if (window)
- flags |= IORESOURCE_WINDOW;
-
- pnp_add_io_resource(dev, start, end, flags);
+ pnp_add_resource(dev, r);
}
/*
@@ -249,130 +174,49 @@
}
}
-static void pnpacpi_parse_allocated_memresource(struct pnp_dev *dev,
- u64 start, u64 len,
- int write_protect, int window)
-{
- int flags = 0;
- u64 end = start + len - 1;
-
- if (len == 0)
- flags |= IORESOURCE_DISABLED;
- if (write_protect == ACPI_READ_WRITE_MEMORY)
- flags |= IORESOURCE_MEM_WRITEABLE;
- if (window)
- flags |= IORESOURCE_WINDOW;
-
- pnp_add_mem_resource(dev, start, end, flags);
-}
-
-static void pnpacpi_parse_allocated_busresource(struct pnp_dev *dev,
- u64 start, u64 len)
-{
- u64 end = start + len - 1;
-
- pnp_add_bus_resource(dev, start, end);
-}
-
-static void pnpacpi_parse_allocated_address_space(struct pnp_dev *dev,
- struct acpi_resource *res)
-{
- struct acpi_resource_address64 addr, *p = &addr;
- acpi_status status;
- int window;
- u64 len;
-
- status = acpi_resource_to_address64(res, p);
- if (!ACPI_SUCCESS(status)) {
- dev_warn(&dev->dev, "failed to convert resource type %d\n",
- res->type);
- return;
- }
-
- /* Windows apparently computes length rather than using _LEN */
- len = p->maximum - p->minimum + 1;
- window = (p->producer_consumer == ACPI_PRODUCER) ? 1 : 0;
-
- if (p->resource_type == ACPI_MEMORY_RANGE)
- pnpacpi_parse_allocated_memresource(dev, p->minimum, len,
- p->info.mem.write_protect, window);
- else if (p->resource_type == ACPI_IO_RANGE)
- pnpacpi_parse_allocated_ioresource(dev, p->minimum, len,
- p->granularity == 0xfff ? ACPI_DECODE_10 :
- ACPI_DECODE_16, window);
- else if (p->resource_type == ACPI_BUS_NUMBER_RANGE)
- pnpacpi_parse_allocated_busresource(dev, p->minimum, len);
-}
-
-static void pnpacpi_parse_allocated_ext_address_space(struct pnp_dev *dev,
- struct acpi_resource *res)
-{
- struct acpi_resource_extended_address64 *p = &res->data.ext_address64;
- int window;
- u64 len;
-
- /* Windows apparently computes length rather than using _LEN */
- len = p->maximum - p->minimum + 1;
- window = (p->producer_consumer == ACPI_PRODUCER) ? 1 : 0;
-
- if (p->resource_type == ACPI_MEMORY_RANGE)
- pnpacpi_parse_allocated_memresource(dev, p->minimum, len,
- p->info.mem.write_protect, window);
- else if (p->resource_type == ACPI_IO_RANGE)
- pnpacpi_parse_allocated_ioresource(dev, p->minimum, len,
- p->granularity == 0xfff ? ACPI_DECODE_10 :
- ACPI_DECODE_16, window);
- else if (p->resource_type == ACPI_BUS_NUMBER_RANGE)
- pnpacpi_parse_allocated_busresource(dev, p->minimum, len);
-}
-
static acpi_status pnpacpi_allocated_resource(struct acpi_resource *res,
void *data)
{
struct pnp_dev *dev = data;
- struct acpi_resource_irq *irq;
struct acpi_resource_dma *dma;
- struct acpi_resource_io *io;
- struct acpi_resource_fixed_io *fixed_io;
struct acpi_resource_vendor_typed *vendor_typed;
- struct acpi_resource_memory24 *memory24;
- struct acpi_resource_memory32 *memory32;
- struct acpi_resource_fixed_memory32 *fixed_memory32;
- struct acpi_resource_extended_irq *extended_irq;
+ struct resource r;
int i, flags;
- switch (res->type) {
- case ACPI_RESOURCE_TYPE_IRQ:
- /*
- * Per spec, only one interrupt per descriptor is allowed in
- * _CRS, but some firmware violates this, so parse them all.
- */
- irq = &res->data.irq;
- if (irq->interrupt_count == 0)
- pnp_add_irq_resource(dev, 0, IORESOURCE_DISABLED);
- else {
- for (i = 0; i < irq->interrupt_count; i++) {
- pnpacpi_parse_allocated_irqresource(dev,
- irq->interrupts[i],
- irq->triggering,
- irq->polarity,
- irq->sharable);
- }
+ if (acpi_dev_resource_memory(res, &r)
+ || acpi_dev_resource_io(res, &r)
+ || acpi_dev_resource_address_space(res, &r)
+ || acpi_dev_resource_ext_address_space(res, &r)) {
+ pnp_add_resource(dev, &r);
+ return AE_OK;
+ }
+ r.flags = 0;
+ if (acpi_dev_resource_interrupt(res, 0, &r)) {
+ pnpacpi_add_irqresource(dev, &r);
+ for (i = 1; acpi_dev_resource_interrupt(res, i, &r); i++)
+ pnpacpi_add_irqresource(dev, &r);
+
+ if (i > 1) {
/*
* The IRQ encoder puts a single interrupt in each
* descriptor, so if a _CRS descriptor has more than
* one interrupt, we won't be able to re-encode it.
*/
- if (pnp_can_write(dev) && irq->interrupt_count > 1) {
+ if (pnp_can_write(dev)) {
dev_warn(&dev->dev, "multiple interrupts in "
"_CRS descriptor; configuration can't "
"be changed\n");
dev->capabilities &= ~PNP_WRITE;
}
}
- break;
+ return AE_OK;
+ } else if (r.flags & IORESOURCE_DISABLED) {
+ pnp_add_irq_resource(dev, 0, IORESOURCE_DISABLED);
+ return AE_OK;
+ }
+ switch (res->type) {
case ACPI_RESOURCE_TYPE_DMA:
dma = &res->data.dma;
if (dma->channel_count > 0 && dma->channels[0] != (u8) -1)
@@ -383,26 +227,10 @@
pnp_add_dma_resource(dev, dma->channels[0], flags);
break;
- case ACPI_RESOURCE_TYPE_IO:
- io = &res->data.io;
- pnpacpi_parse_allocated_ioresource(dev,
- io->minimum,
- io->address_length,
- io->io_decode, 0);
- break;
-
case ACPI_RESOURCE_TYPE_START_DEPENDENT:
case ACPI_RESOURCE_TYPE_END_DEPENDENT:
break;
- case ACPI_RESOURCE_TYPE_FIXED_IO:
- fixed_io = &res->data.fixed_io;
- pnpacpi_parse_allocated_ioresource(dev,
- fixed_io->address,
- fixed_io->address_length,
- ACPI_DECODE_10, 0);
- break;
-
case ACPI_RESOURCE_TYPE_VENDOR:
vendor_typed = &res->data.vendor_typed;
pnpacpi_parse_allocated_vendor(dev, vendor_typed);
@@ -411,66 +239,6 @@
case ACPI_RESOURCE_TYPE_END_TAG:
break;
- case ACPI_RESOURCE_TYPE_MEMORY24:
- memory24 = &res->data.memory24;
- pnpacpi_parse_allocated_memresource(dev,
- memory24->minimum,
- memory24->address_length,
- memory24->write_protect, 0);
- break;
- case ACPI_RESOURCE_TYPE_MEMORY32:
- memory32 = &res->data.memory32;
- pnpacpi_parse_allocated_memresource(dev,
- memory32->minimum,
- memory32->address_length,
- memory32->write_protect, 0);
- break;
- case ACPI_RESOURCE_TYPE_FIXED_MEMORY32:
- fixed_memory32 = &res->data.fixed_memory32;
- pnpacpi_parse_allocated_memresource(dev,
- fixed_memory32->address,
- fixed_memory32->address_length,
- fixed_memory32->write_protect, 0);
- break;
- case ACPI_RESOURCE_TYPE_ADDRESS16:
- case ACPI_RESOURCE_TYPE_ADDRESS32:
- case ACPI_RESOURCE_TYPE_ADDRESS64:
- pnpacpi_parse_allocated_address_space(dev, res);
- break;
-
- case ACPI_RESOURCE_TYPE_EXTENDED_ADDRESS64:
- pnpacpi_parse_allocated_ext_address_space(dev, res);
- break;
-
- case ACPI_RESOURCE_TYPE_EXTENDED_IRQ:
- extended_irq = &res->data.extended_irq;
-
- if (extended_irq->interrupt_count == 0)
- pnp_add_irq_resource(dev, 0, IORESOURCE_DISABLED);
- else {
- for (i = 0; i < extended_irq->interrupt_count; i++) {
- pnpacpi_parse_allocated_irqresource(dev,
- extended_irq->interrupts[i],
- extended_irq->triggering,
- extended_irq->polarity,
- extended_irq->sharable);
- }
-
- /*
- * The IRQ encoder puts a single interrupt in each
- * descriptor, so if a _CRS descriptor has more than
- * one interrupt, we won't be able to re-encode it.
- */
- if (pnp_can_write(dev) &&
- extended_irq->interrupt_count > 1) {
- dev_warn(&dev->dev, "multiple interrupts in "
- "_CRS descriptor; configuration can't "
- "be changed\n");
- dev->capabilities &= ~PNP_WRITE;
- }
- }
- break;
-
case ACPI_RESOURCE_TYPE_GENERIC_REGISTER:
break;
@@ -531,7 +299,7 @@
if (p->interrupts[i])
__set_bit(p->interrupts[i], map.bits);
- flags = irq_flags(p->triggering, p->polarity, p->sharable);
+ flags = acpi_dev_irq_flags(p->triggering, p->polarity, p->sharable);
pnp_register_irq_resource(dev, option_flags, &map, flags);
}
@@ -555,7 +323,7 @@
}
}
- flags = irq_flags(p->triggering, p->polarity, p->sharable);
+ flags = acpi_dev_irq_flags(p->triggering, p->polarity, p->sharable);
pnp_register_irq_resource(dev, option_flags, &map, flags);
}
diff --git a/drivers/pnp/pnpbios/core.c b/drivers/pnp/pnpbios/core.c
index 9d42226..5d66e55 100644
--- a/drivers/pnp/pnpbios/core.c
+++ b/drivers/pnp/pnpbios/core.c
@@ -91,8 +91,6 @@
*
*/
-#ifdef CONFIG_HOTPLUG
-
static struct completion unload_sem;
/*
@@ -199,8 +197,6 @@
complete_and_exit(&unload_sem, 0);
}
-#endif /* CONFIG_HOTPLUG */
-
static int pnpbios_get_resources(struct pnp_dev *dev)
{
u8 nodenum = dev->number;
@@ -573,21 +569,19 @@
static int __init pnpbios_thread_init(void)
{
+ struct task_struct *task;
#if defined(CONFIG_PPC)
if (check_legacy_ioport(PNPBIOS_BASE))
return 0;
#endif
if (pnpbios_disabled)
return 0;
-#ifdef CONFIG_HOTPLUG
- {
- struct task_struct *task;
- init_completion(&unload_sem);
- task = kthread_run(pnp_dock_thread, NULL, "kpnpbiosd");
- if (IS_ERR(task))
- return PTR_ERR(task);
- }
-#endif
+
+ init_completion(&unload_sem);
+ task = kthread_run(pnp_dock_thread, NULL, "kpnpbiosd");
+ if (IS_ERR(task))
+ return PTR_ERR(task);
+
return 0;
}
diff --git a/drivers/pnp/resource.c b/drivers/pnp/resource.c
index b0ecacb..3e6db1c 100644
--- a/drivers/pnp/resource.c
+++ b/drivers/pnp/resource.c
@@ -503,6 +503,22 @@
return pnp_res;
}
+struct pnp_resource *pnp_add_resource(struct pnp_dev *dev,
+ struct resource *res)
+{
+ struct pnp_resource *pnp_res;
+
+ pnp_res = pnp_new_resource(dev);
+ if (!pnp_res) {
+ dev_err(&dev->dev, "can't add resource %pR\n", res);
+ return NULL;
+ }
+
+ pnp_res->res = *res;
+ dev_dbg(&dev->dev, "%pR\n", res);
+ return pnp_res;
+}
+
struct pnp_resource *pnp_add_irq_resource(struct pnp_dev *dev, int irq,
int flags)
{
diff --git a/drivers/power/88pm860x_battery.c b/drivers/power/88pm860x_battery.c
index beed5ecf..8bc80b0 100644
--- a/drivers/power/88pm860x_battery.c
+++ b/drivers/power/88pm860x_battery.c
@@ -901,7 +901,7 @@
POWER_SUPPLY_PROP_TEMP,
};
-static __devinit int pm860x_battery_probe(struct platform_device *pdev)
+static int pm860x_battery_probe(struct platform_device *pdev)
{
struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent);
struct pm860x_battery_info *info;
@@ -989,7 +989,7 @@
return ret;
}
-static int __devexit pm860x_battery_remove(struct platform_device *pdev)
+static int pm860x_battery_remove(struct platform_device *pdev)
{
struct pm860x_battery_info *info = platform_get_drvdata(pdev);
@@ -1033,7 +1033,7 @@
.pm = &pm860x_battery_pm_ops,
},
.probe = pm860x_battery_probe,
- .remove = __devexit_p(pm860x_battery_remove),
+ .remove = pm860x_battery_remove,
};
module_platform_driver(pm860x_battery_driver);
diff --git a/drivers/power/88pm860x_charger.c b/drivers/power/88pm860x_charger.c
index 2dbeb14..4b37a5a 100644
--- a/drivers/power/88pm860x_charger.c
+++ b/drivers/power/88pm860x_charger.c
@@ -645,7 +645,7 @@
{ "vchg", pm860x_vchg_handler },
};
-static __devinit int pm860x_charger_probe(struct platform_device *pdev)
+static int pm860x_charger_probe(struct platform_device *pdev)
{
struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent);
struct pm860x_charger_info *info;
@@ -718,7 +718,7 @@
return ret;
}
-static int __devexit pm860x_charger_remove(struct platform_device *pdev)
+static int pm860x_charger_remove(struct platform_device *pdev)
{
struct pm860x_charger_info *info = platform_get_drvdata(pdev);
int i;
@@ -738,7 +738,7 @@
.owner = THIS_MODULE,
},
.probe = pm860x_charger_probe,
- .remove = __devexit_p(pm860x_charger_remove),
+ .remove = pm860x_charger_remove,
};
module_platform_driver(pm860x_charger_driver);
diff --git a/drivers/power/ab8500_btemp.c b/drivers/power/ab8500_btemp.c
index e3b6395..989b099 100644
--- a/drivers/power/ab8500_btemp.c
+++ b/drivers/power/ab8500_btemp.c
@@ -938,7 +938,7 @@
#define ab8500_btemp_resume NULL
#endif
-static int __devexit ab8500_btemp_remove(struct platform_device *pdev)
+static int ab8500_btemp_remove(struct platform_device *pdev)
{
struct ab8500_btemp *di = platform_get_drvdata(pdev);
int i, irq;
@@ -960,7 +960,7 @@
return 0;
}
-static int __devinit ab8500_btemp_probe(struct platform_device *pdev)
+static int ab8500_btemp_probe(struct platform_device *pdev)
{
int irq, i, ret = 0;
u8 val;
@@ -1101,7 +1101,7 @@
static struct platform_driver ab8500_btemp_driver = {
.probe = ab8500_btemp_probe,
- .remove = __devexit_p(ab8500_btemp_remove),
+ .remove = ab8500_btemp_remove,
.suspend = ab8500_btemp_suspend,
.resume = ab8500_btemp_resume,
.driver = {
diff --git a/drivers/power/ab8500_charger.c b/drivers/power/ab8500_charger.c
index 26ff759..7ecb8ab 100644
--- a/drivers/power/ab8500_charger.c
+++ b/drivers/power/ab8500_charger.c
@@ -2490,7 +2490,7 @@
#define ab8500_charger_resume NULL
#endif
-static int __devexit ab8500_charger_remove(struct platform_device *pdev)
+static int ab8500_charger_remove(struct platform_device *pdev)
{
struct ab8500_charger *di = platform_get_drvdata(pdev);
int i, irq, ret;
@@ -2531,7 +2531,7 @@
return 0;
}
-static int __devinit ab8500_charger_probe(struct platform_device *pdev)
+static int ab8500_charger_probe(struct platform_device *pdev)
{
int irq, i, charger_status, ret = 0;
struct abx500_bm_plat_data *plat_data = pdev->dev.platform_data;
@@ -2765,7 +2765,7 @@
static struct platform_driver ab8500_charger_driver = {
.probe = ab8500_charger_probe,
- .remove = __devexit_p(ab8500_charger_remove),
+ .remove = ab8500_charger_remove,
.suspend = ab8500_charger_suspend,
.resume = ab8500_charger_resume,
.driver = {
diff --git a/drivers/power/ab8500_fg.c b/drivers/power/ab8500_fg.c
index 2db8cc2..331dc43 100644
--- a/drivers/power/ab8500_fg.c
+++ b/drivers/power/ab8500_fg.c
@@ -2411,7 +2411,7 @@
#define ab8500_fg_resume NULL
#endif
-static int __devexit ab8500_fg_remove(struct platform_device *pdev)
+static int ab8500_fg_remove(struct platform_device *pdev)
{
int ret = 0;
struct ab8500_fg *di = platform_get_drvdata(pdev);
@@ -2442,7 +2442,7 @@
{"CCEOC", ab8500_fg_cc_data_end_handler},
};
-static int __devinit ab8500_fg_probe(struct platform_device *pdev)
+static int ab8500_fg_probe(struct platform_device *pdev)
{
int i, irq;
int ret = 0;
@@ -2614,7 +2614,7 @@
static struct platform_driver ab8500_fg_driver = {
.probe = ab8500_fg_probe,
- .remove = __devexit_p(ab8500_fg_remove),
+ .remove = ab8500_fg_remove,
.suspend = ab8500_fg_suspend,
.resume = ab8500_fg_resume,
.driver = {
diff --git a/drivers/power/abx500_chargalg.c b/drivers/power/abx500_chargalg.c
index 4d30280..19f2541 100644
--- a/drivers/power/abx500_chargalg.c
+++ b/drivers/power/abx500_chargalg.c
@@ -1782,7 +1782,7 @@
#define abx500_chargalg_resume NULL
#endif
-static int __devexit abx500_chargalg_remove(struct platform_device *pdev)
+static int abx500_chargalg_remove(struct platform_device *pdev)
{
struct abx500_chargalg *di = platform_get_drvdata(pdev);
@@ -1800,7 +1800,7 @@
return 0;
}
-static int __devinit abx500_chargalg_probe(struct platform_device *pdev)
+static int abx500_chargalg_probe(struct platform_device *pdev)
{
struct abx500_bm_plat_data *plat_data;
int ret = 0;
@@ -1893,7 +1893,7 @@
static struct platform_driver abx500_chargalg_driver = {
.probe = abx500_chargalg_probe,
- .remove = __devexit_p(abx500_chargalg_remove),
+ .remove = abx500_chargalg_remove,
.suspend = abx500_chargalg_suspend,
.resume = abx500_chargalg_resume,
.driver = {
diff --git a/drivers/power/avs/smartreflex.c b/drivers/power/avs/smartreflex.c
index 24768a2..d0fed2c 100644
--- a/drivers/power/avs/smartreflex.c
+++ b/drivers/power/avs/smartreflex.c
@@ -1026,7 +1026,7 @@
return ret;
}
-static int __devexit omap_sr_remove(struct platform_device *pdev)
+static int omap_sr_remove(struct platform_device *pdev)
{
struct omap_sr_data *pdata = pdev->dev.platform_data;
struct omap_sr *sr_info;
@@ -1059,7 +1059,7 @@
return 0;
}
-static void __devexit omap_sr_shutdown(struct platform_device *pdev)
+static void omap_sr_shutdown(struct platform_device *pdev)
{
struct omap_sr_data *pdata = pdev->dev.platform_data;
struct omap_sr *sr_info;
@@ -1083,8 +1083,8 @@
}
static struct platform_driver smartreflex_driver = {
- .remove = __devexit_p(omap_sr_remove),
- .shutdown = __devexit_p(omap_sr_shutdown),
+ .remove = omap_sr_remove,
+ .shutdown = omap_sr_shutdown,
.driver = {
.name = "smartreflex",
},
diff --git a/drivers/power/bq27x00_battery.c b/drivers/power/bq27x00_battery.c
index 5860d4d..e0edaf7 100644
--- a/drivers/power/bq27x00_battery.c
+++ b/drivers/power/bq27x00_battery.c
@@ -926,7 +926,7 @@
return pdata->read(dev, reg);
}
-static int __devinit bq27000_battery_probe(struct platform_device *pdev)
+static int bq27000_battery_probe(struct platform_device *pdev)
{
struct bq27x00_device_info *di;
struct bq27000_platform_data *pdata = pdev->dev.platform_data;
@@ -969,7 +969,7 @@
return ret;
}
-static int __devexit bq27000_battery_remove(struct platform_device *pdev)
+static int bq27000_battery_remove(struct platform_device *pdev)
{
struct bq27x00_device_info *di = platform_get_drvdata(pdev);
@@ -983,7 +983,7 @@
static struct platform_driver bq27000_battery_driver = {
.probe = bq27000_battery_probe,
- .remove = __devexit_p(bq27000_battery_remove),
+ .remove = bq27000_battery_remove,
.driver = {
.name = "bq27000-battery",
.owner = THIS_MODULE,
diff --git a/drivers/power/charger-manager.c b/drivers/power/charger-manager.c
index 8a0aca6..adb3a4b 100644
--- a/drivers/power/charger-manager.c
+++ b/drivers/power/charger-manager.c
@@ -1655,7 +1655,7 @@
return ret;
}
-static int __devexit charger_manager_remove(struct platform_device *pdev)
+static int charger_manager_remove(struct platform_device *pdev)
{
struct charger_manager *cm = platform_get_drvdata(pdev);
struct charger_desc *desc = cm->desc;
@@ -1812,7 +1812,7 @@
.pm = &charger_manager_pm,
},
.probe = charger_manager_probe,
- .remove = __devexit_p(charger_manager_remove),
+ .remove = charger_manager_remove,
.id_table = charger_manager_id,
};
diff --git a/drivers/power/collie_battery.c b/drivers/power/collie_battery.c
index b19bfe4..c58d0e3 100644
--- a/drivers/power/collie_battery.c
+++ b/drivers/power/collie_battery.c
@@ -305,7 +305,7 @@
#define collie_bat_resume NULL
#endif
-static int __devinit collie_bat_probe(struct ucb1x00_dev *dev)
+static int collie_bat_probe(struct ucb1x00_dev *dev)
{
int ret;
@@ -349,7 +349,7 @@
return ret;
}
-static void __devexit collie_bat_remove(struct ucb1x00_dev *dev)
+static void collie_bat_remove(struct ucb1x00_dev *dev)
{
free_irq(gpio_to_irq(COLLIE_GPIO_CO), &collie_bat_main);
@@ -367,7 +367,7 @@
static struct ucb1x00_driver collie_bat_driver = {
.add = collie_bat_probe,
- .remove = __devexit_p(collie_bat_remove),
+ .remove = collie_bat_remove,
.suspend = collie_bat_suspend,
.resume = collie_bat_resume,
};
diff --git a/drivers/power/da9052-battery.c b/drivers/power/da9052-battery.c
index d9d034d..bb0df89 100644
--- a/drivers/power/da9052-battery.c
+++ b/drivers/power/da9052-battery.c
@@ -576,7 +576,7 @@
"CHG END",
};
-static s32 __devinit da9052_bat_probe(struct platform_device *pdev)
+static s32 da9052_bat_probe(struct platform_device *pdev)
{
struct da9052_pdata *pdata;
struct da9052_battery *bat;
@@ -630,7 +630,7 @@
kfree(bat);
return ret;
}
-static int __devexit da9052_bat_remove(struct platform_device *pdev)
+static int da9052_bat_remove(struct platform_device *pdev)
{
int i;
int irq;
@@ -648,7 +648,7 @@
static struct platform_driver da9052_bat_driver = {
.probe = da9052_bat_probe,
- .remove = __devexit_p(da9052_bat_remove),
+ .remove = da9052_bat_remove,
.driver = {
.name = "da9052-bat",
.owner = THIS_MODULE,
diff --git a/drivers/power/ds2780_battery.c b/drivers/power/ds2780_battery.c
index 74fad94..8b6c453 100644
--- a/drivers/power/ds2780_battery.c
+++ b/drivers/power/ds2780_battery.c
@@ -755,7 +755,7 @@
.attrs = ds2780_attributes,
};
-static int __devinit ds2780_battery_probe(struct platform_device *pdev)
+static int ds2780_battery_probe(struct platform_device *pdev)
{
int ret = 0;
struct ds2780_device_info *dev_info;
@@ -819,7 +819,7 @@
return ret;
}
-static int __devexit ds2780_battery_remove(struct platform_device *pdev)
+static int ds2780_battery_remove(struct platform_device *pdev)
{
struct ds2780_device_info *dev_info = platform_get_drvdata(pdev);
@@ -837,7 +837,7 @@
.name = "ds2780-battery",
},
.probe = ds2780_battery_probe,
- .remove = __devexit_p(ds2780_battery_remove),
+ .remove = ds2780_battery_remove,
};
module_platform_driver(ds2780_battery_driver);
diff --git a/drivers/power/ds2781_battery.c b/drivers/power/ds2781_battery.c
index 22b3c8c..0a5acc6 100644
--- a/drivers/power/ds2781_battery.c
+++ b/drivers/power/ds2781_battery.c
@@ -750,7 +750,7 @@
.attrs = ds2781_attributes,
};
-static int __devinit ds2781_battery_probe(struct platform_device *pdev)
+static int ds2781_battery_probe(struct platform_device *pdev)
{
int ret = 0;
struct ds2781_device_info *dev_info;
@@ -810,7 +810,7 @@
return ret;
}
-static int __devexit ds2781_battery_remove(struct platform_device *pdev)
+static int ds2781_battery_remove(struct platform_device *pdev)
{
struct ds2781_device_info *dev_info = platform_get_drvdata(pdev);
@@ -827,7 +827,7 @@
.name = "ds2781-battery",
},
.probe = ds2781_battery_probe,
- .remove = __devexit_p(ds2781_battery_remove),
+ .remove = ds2781_battery_remove,
};
module_platform_driver(ds2781_battery_driver);
diff --git a/drivers/power/generic-adc-battery.c b/drivers/power/generic-adc-battery.c
index 9bdf444..e902b08 100644
--- a/drivers/power/generic-adc-battery.c
+++ b/drivers/power/generic-adc-battery.c
@@ -236,7 +236,7 @@
return IRQ_HANDLED;
}
-static int __devinit gab_probe(struct platform_device *pdev)
+static int gab_probe(struct platform_device *pdev)
{
struct gab *adc_bat;
struct power_supply *psy;
@@ -351,7 +351,7 @@
return ret;
}
-static int __devexit gab_remove(struct platform_device *pdev)
+static int gab_remove(struct platform_device *pdev)
{
int chan;
struct gab *adc_bat = platform_get_drvdata(pdev);
@@ -413,7 +413,7 @@
.pm = GAB_PM_OPS
},
.probe = gab_probe,
- .remove = __devexit_p(gab_remove),
+ .remove = gab_remove,
};
module_platform_driver(gab_driver);
diff --git a/drivers/power/gpio-charger.c b/drivers/power/gpio-charger.c
index cb2aa31..e3e40a9 100644
--- a/drivers/power/gpio-charger.c
+++ b/drivers/power/gpio-charger.c
@@ -68,7 +68,7 @@
POWER_SUPPLY_PROP_ONLINE,
};
-static int __devinit gpio_charger_probe(struct platform_device *pdev)
+static int gpio_charger_probe(struct platform_device *pdev)
{
const struct gpio_charger_platform_data *pdata = pdev->dev.platform_data;
struct gpio_charger *gpio_charger;
@@ -144,7 +144,7 @@
return ret;
}
-static int __devexit gpio_charger_remove(struct platform_device *pdev)
+static int gpio_charger_remove(struct platform_device *pdev)
{
struct gpio_charger *gpio_charger = platform_get_drvdata(pdev);
@@ -177,7 +177,7 @@
static struct platform_driver gpio_charger_driver = {
.probe = gpio_charger_probe,
- .remove = __devexit_p(gpio_charger_remove),
+ .remove = gpio_charger_remove,
.driver = {
.name = "gpio-charger",
.owner = THIS_MODULE,
diff --git a/drivers/power/intel_mid_battery.c b/drivers/power/intel_mid_battery.c
index d096497..18d136b 100644
--- a/drivers/power/intel_mid_battery.c
+++ b/drivers/power/intel_mid_battery.c
@@ -649,7 +649,7 @@
* PMIC battery initializes its internal data structue and other
* infrastructure components for it to work as expected.
*/
-static __devinit int probe(int irq, struct device *dev)
+static int probe(int irq, struct device *dev)
{
int retval = 0;
struct pmic_power_module_info *pbi;
@@ -739,7 +739,7 @@
return retval;
}
-static int __devinit platform_pmic_battery_probe(struct platform_device *pdev)
+static int platform_pmic_battery_probe(struct platform_device *pdev)
{
return probe(pdev->id, &pdev->dev);
}
@@ -754,7 +754,7 @@
* pmic_battery_probe.
*/
-static int __devexit platform_pmic_battery_remove(struct platform_device *pdev)
+static int platform_pmic_battery_remove(struct platform_device *pdev)
{
struct pmic_power_module_info *pbi = dev_get_drvdata(&pdev->dev);
@@ -776,7 +776,7 @@
.owner = THIS_MODULE,
},
.probe = platform_pmic_battery_probe,
- .remove = __devexit_p(platform_pmic_battery_remove),
+ .remove = platform_pmic_battery_remove,
};
module_platform_driver(platform_pmic_battery_driver);
diff --git a/drivers/power/isp1704_charger.c b/drivers/power/isp1704_charger.c
index 1229119..176ad59 100644
--- a/drivers/power/isp1704_charger.c
+++ b/drivers/power/isp1704_charger.c
@@ -406,7 +406,7 @@
return -ENODEV;
}
-static int __devinit isp1704_charger_probe(struct platform_device *pdev)
+static int isp1704_charger_probe(struct platform_device *pdev)
{
struct isp1704_charger *isp;
int ret = -ENODEV;
@@ -484,7 +484,7 @@
return ret;
}
-static int __devexit isp1704_charger_remove(struct platform_device *pdev)
+static int isp1704_charger_remove(struct platform_device *pdev)
{
struct isp1704_charger *isp = platform_get_drvdata(pdev);
@@ -502,7 +502,7 @@
.name = "isp1704_charger",
},
.probe = isp1704_charger_probe,
- .remove = __devexit_p(isp1704_charger_remove),
+ .remove = isp1704_charger_remove,
};
module_platform_driver(isp1704_charger_driver);
diff --git a/drivers/power/jz4740-battery.c b/drivers/power/jz4740-battery.c
index ffbed5e..74ac69e 100644
--- a/drivers/power/jz4740-battery.c
+++ b/drivers/power/jz4740-battery.c
@@ -238,7 +238,7 @@
schedule_delayed_work(&jz_battery->work, interval);
}
-static int __devinit jz_battery_probe(struct platform_device *pdev)
+static int jz_battery_probe(struct platform_device *pdev)
{
int ret = 0;
struct jz_battery_platform_data *pdata = pdev->dev.parent->platform_data;
@@ -376,7 +376,7 @@
return ret;
}
-static int __devexit jz_battery_remove(struct platform_device *pdev)
+static int jz_battery_remove(struct platform_device *pdev)
{
struct jz_battery *jz_battery = platform_get_drvdata(pdev);
@@ -431,7 +431,7 @@
static struct platform_driver jz_battery_driver = {
.probe = jz_battery_probe,
- .remove = __devexit_p(jz_battery_remove),
+ .remove = jz_battery_remove,
.driver = {
.name = "jz4740-battery",
.owner = THIS_MODULE,
diff --git a/drivers/power/lp8727_charger.c b/drivers/power/lp8727_charger.c
index c628224..4ee71a9 100644
--- a/drivers/power/lp8727_charger.c
+++ b/drivers/power/lp8727_charger.c
@@ -522,7 +522,7 @@
return 0;
}
-static int __devexit lp8727_remove(struct i2c_client *cl)
+static int lp8727_remove(struct i2c_client *cl)
{
struct lp8727_chg *pchg = i2c_get_clientdata(cl);
@@ -542,7 +542,7 @@
.name = "lp8727",
},
.probe = lp8727_probe,
- .remove = __devexit_p(lp8727_remove),
+ .remove = lp8727_remove,
.id_table = lp8727_ids,
};
module_i2c_driver(lp8727_driver);
diff --git a/drivers/power/lp8788-charger.c b/drivers/power/lp8788-charger.c
index e852d12..a1c51ac 100644
--- a/drivers/power/lp8788-charger.c
+++ b/drivers/power/lp8788-charger.c
@@ -729,7 +729,7 @@
.attrs = lp8788_charger_attr,
};
-static __devinit int lp8788_charger_probe(struct platform_device *pdev)
+static int lp8788_charger_probe(struct platform_device *pdev)
{
struct lp8788 *lp = dev_get_drvdata(pdev->dev.parent);
struct lp8788_charger *pchg;
@@ -766,7 +766,7 @@
return 0;
}
-static int __devexit lp8788_charger_remove(struct platform_device *pdev)
+static int lp8788_charger_remove(struct platform_device *pdev)
{
struct lp8788_charger *pchg = platform_get_drvdata(pdev);
@@ -781,7 +781,7 @@
static struct platform_driver lp8788_charger_driver = {
.probe = lp8788_charger_probe,
- .remove = __devexit_p(lp8788_charger_remove),
+ .remove = lp8788_charger_remove,
.driver = {
.name = LP8788_DEV_CHARGER,
.owner = THIS_MODULE,
diff --git a/drivers/power/max17040_battery.c b/drivers/power/max17040_battery.c
index 58e6783..22cfe9c 100644
--- a/drivers/power/max17040_battery.c
+++ b/drivers/power/max17040_battery.c
@@ -197,7 +197,7 @@
POWER_SUPPLY_PROP_CAPACITY,
};
-static int __devinit max17040_probe(struct i2c_client *client,
+static int max17040_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
@@ -238,7 +238,7 @@
return 0;
}
-static int __devexit max17040_remove(struct i2c_client *client)
+static int max17040_remove(struct i2c_client *client)
{
struct max17040_chip *chip = i2c_get_clientdata(client);
@@ -285,7 +285,7 @@
.name = "max17040",
},
.probe = max17040_probe,
- .remove = __devexit_p(max17040_remove),
+ .remove = max17040_remove,
.suspend = max17040_suspend,
.resume = max17040_resume,
.id_table = max17040_id,
diff --git a/drivers/power/max17042_battery.c b/drivers/power/max17042_battery.c
index 74abc6c..5ffe469 100644
--- a/drivers/power/max17042_battery.c
+++ b/drivers/power/max17042_battery.c
@@ -681,7 +681,7 @@
}
#endif
-static int __devinit max17042_probe(struct i2c_client *client,
+static int max17042_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
@@ -775,7 +775,7 @@
return 0;
}
-static int __devexit max17042_remove(struct i2c_client *client)
+static int max17042_remove(struct i2c_client *client)
{
struct max17042_chip *chip = i2c_get_clientdata(client);
@@ -851,7 +851,7 @@
.pm = MAX17042_PM_OPS,
},
.probe = max17042_probe,
- .remove = __devexit_p(max17042_remove),
+ .remove = max17042_remove,
.id_table = max17042_id,
};
module_i2c_driver(max17042_i2c_driver);
diff --git a/drivers/power/max8903_charger.c b/drivers/power/max8903_charger.c
index 3e23f43..14e2b96 100644
--- a/drivers/power/max8903_charger.c
+++ b/drivers/power/max8903_charger.c
@@ -179,7 +179,7 @@
return IRQ_HANDLED;
}
-static __devinit int max8903_probe(struct platform_device *pdev)
+static int max8903_probe(struct platform_device *pdev)
{
struct max8903_data *data;
struct device *dev = &pdev->dev;
@@ -345,7 +345,7 @@
return ret;
}
-static __devexit int max8903_remove(struct platform_device *pdev)
+static int max8903_remove(struct platform_device *pdev)
{
struct max8903_data *data = platform_get_drvdata(pdev);
@@ -367,7 +367,7 @@
static struct platform_driver max8903_driver = {
.probe = max8903_probe,
- .remove = __devexit_p(max8903_remove),
+ .remove = max8903_remove,
.driver = {
.name = "max8903-charger",
.owner = THIS_MODULE,
diff --git a/drivers/power/max8925_power.c b/drivers/power/max8925_power.c
index daa333b..1a075f1 100644
--- a/drivers/power/max8925_power.c
+++ b/drivers/power/max8925_power.c
@@ -356,7 +356,7 @@
_irq, ret); \
} while (0)
-static __devinit int max8925_init_charger(struct max8925_chip *chip,
+static int max8925_init_charger(struct max8925_chip *chip,
struct max8925_power_info *info)
{
int ret;
@@ -414,7 +414,7 @@
return 0;
}
-static __devexit int max8925_deinit_charger(struct max8925_power_info *info)
+static int max8925_deinit_charger(struct max8925_power_info *info)
{
struct max8925_chip *chip = info->chip;
int irq;
@@ -426,7 +426,7 @@
return 0;
}
-static __devinit int max8925_power_probe(struct platform_device *pdev)
+static int max8925_power_probe(struct platform_device *pdev)
{
struct max8925_chip *chip = dev_get_drvdata(pdev->dev.parent);
struct max8925_power_pdata *pdata = NULL;
@@ -501,7 +501,7 @@
return ret;
}
-static __devexit int max8925_power_remove(struct platform_device *pdev)
+static int max8925_power_remove(struct platform_device *pdev)
{
struct max8925_power_info *info = platform_get_drvdata(pdev);
@@ -517,7 +517,7 @@
static struct platform_driver max8925_power_driver = {
.probe = max8925_power_probe,
- .remove = __devexit_p(max8925_power_remove),
+ .remove = max8925_power_remove,
.driver = {
.name = "max8925-power",
},
diff --git a/drivers/power/max8997_charger.c b/drivers/power/max8997_charger.c
index 6e88c5d..e757885 100644
--- a/drivers/power/max8997_charger.c
+++ b/drivers/power/max8997_charger.c
@@ -86,7 +86,7 @@
return 0;
}
-static __devinit int max8997_battery_probe(struct platform_device *pdev)
+static int max8997_battery_probe(struct platform_device *pdev)
{
int ret = 0;
struct charger_data *charger;
@@ -167,7 +167,7 @@
return ret;
}
-static int __devexit max8997_battery_remove(struct platform_device *pdev)
+static int max8997_battery_remove(struct platform_device *pdev)
{
struct charger_data *charger = platform_get_drvdata(pdev);
@@ -187,7 +187,7 @@
.owner = THIS_MODULE,
},
.probe = max8997_battery_probe,
- .remove = __devexit_p(max8997_battery_remove),
+ .remove = max8997_battery_remove,
.id_table = max8997_battery_id,
};
diff --git a/drivers/power/max8998_charger.c b/drivers/power/max8998_charger.c
index 6dc01c2..bf677e3 100644
--- a/drivers/power/max8998_charger.c
+++ b/drivers/power/max8998_charger.c
@@ -75,7 +75,7 @@
return 0;
}
-static __devinit int max8998_battery_probe(struct platform_device *pdev)
+static int max8998_battery_probe(struct platform_device *pdev)
{
struct max8998_dev *iodev = dev_get_drvdata(pdev->dev.parent);
struct max8998_platform_data *pdata = dev_get_platdata(iodev->dev);
@@ -178,7 +178,7 @@
return ret;
}
-static int __devexit max8998_battery_remove(struct platform_device *pdev)
+static int max8998_battery_remove(struct platform_device *pdev)
{
struct max8998_battery_data *max8998 = platform_get_drvdata(pdev);
@@ -199,7 +199,7 @@
.owner = THIS_MODULE,
},
.probe = max8998_battery_probe,
- .remove = __devexit_p(max8998_battery_remove),
+ .remove = max8998_battery_remove,
.id_table = max8998_battery_id,
};
diff --git a/drivers/power/olpc_battery.c b/drivers/power/olpc_battery.c
index a89a41a..298c47d 100644
--- a/drivers/power/olpc_battery.c
+++ b/drivers/power/olpc_battery.c
@@ -598,7 +598,7 @@
return 0;
}
-static int __devinit olpc_battery_probe(struct platform_device *pdev)
+static int olpc_battery_probe(struct platform_device *pdev)
{
int ret;
uint8_t status;
@@ -659,7 +659,7 @@
return ret;
}
-static int __devexit olpc_battery_remove(struct platform_device *pdev)
+static int olpc_battery_remove(struct platform_device *pdev)
{
device_remove_file(olpc_bat.dev, &olpc_bat_error);
device_remove_bin_file(olpc_bat.dev, &olpc_bat_eeprom);
@@ -681,7 +681,7 @@
.of_match_table = olpc_battery_ids,
},
.probe = olpc_battery_probe,
- .remove = __devexit_p(olpc_battery_remove),
+ .remove = olpc_battery_remove,
.suspend = olpc_battery_suspend,
};
diff --git a/drivers/power/pcf50633-charger.c b/drivers/power/pcf50633-charger.c
index 3d1e9ef..c2122a7 100644
--- a/drivers/power/pcf50633-charger.c
+++ b/drivers/power/pcf50633-charger.c
@@ -366,7 +366,7 @@
PCF50633_IRQ_LOWBAT,
};
-static int __devinit pcf50633_mbc_probe(struct platform_device *pdev)
+static int pcf50633_mbc_probe(struct platform_device *pdev)
{
struct pcf50633_mbc *mbc;
int ret;
@@ -447,7 +447,7 @@
return 0;
}
-static int __devexit pcf50633_mbc_remove(struct platform_device *pdev)
+static int pcf50633_mbc_remove(struct platform_device *pdev)
{
struct pcf50633_mbc *mbc = platform_get_drvdata(pdev);
int i;
@@ -471,7 +471,7 @@
.name = "pcf50633-mbc",
},
.probe = pcf50633_mbc_probe,
- .remove = __devexit_p(pcf50633_mbc_remove),
+ .remove = pcf50633_mbc_remove,
};
module_platform_driver(pcf50633_mbc_driver);
diff --git a/drivers/power/s3c_adc_battery.c b/drivers/power/s3c_adc_battery.c
index 8b804a5..d2ca989 100644
--- a/drivers/power/s3c_adc_battery.c
+++ b/drivers/power/s3c_adc_battery.c
@@ -286,7 +286,7 @@
return IRQ_HANDLED;
}
-static int __devinit s3c_adc_bat_probe(struct platform_device *pdev)
+static int s3c_adc_bat_probe(struct platform_device *pdev)
{
struct s3c_adc_client *client;
struct s3c_adc_bat_pdata *pdata = pdev->dev.platform_data;
diff --git a/drivers/power/sbs-battery.c b/drivers/power/sbs-battery.c
index 4146596..3960f0b 100644
--- a/drivers/power/sbs-battery.c
+++ b/drivers/power/sbs-battery.c
@@ -675,7 +675,7 @@
}
#endif
-static int __devinit sbs_probe(struct i2c_client *client,
+static int sbs_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct sbs_info *chip;
@@ -800,7 +800,7 @@
return rc;
}
-static int __devexit sbs_remove(struct i2c_client *client)
+static int sbs_remove(struct i2c_client *client)
{
struct sbs_info *chip = i2c_get_clientdata(client);
@@ -853,7 +853,7 @@
static struct i2c_driver sbs_battery_driver = {
.probe = sbs_probe,
- .remove = __devexit_p(sbs_remove),
+ .remove = sbs_remove,
.suspend = sbs_suspend,
.resume = sbs_resume,
.id_table = sbs_id,
diff --git a/drivers/power/smb347-charger.c b/drivers/power/smb347-charger.c
index a9707c1..acf84e8 100644
--- a/drivers/power/smb347-charger.c
+++ b/drivers/power/smb347-charger.c
@@ -1313,7 +1313,7 @@
.name = "smb347",
},
.probe = smb347_probe,
- .remove = __devexit_p(smb347_remove),
+ .remove = smb347_remove,
.id_table = smb347_id,
};
diff --git a/drivers/power/tosa_battery.c b/drivers/power/tosa_battery.c
index 51199b5..0224de5 100644
--- a/drivers/power/tosa_battery.c
+++ b/drivers/power/tosa_battery.c
@@ -342,7 +342,7 @@
#define tosa_bat_resume NULL
#endif
-static int __devinit tosa_bat_probe(struct platform_device *dev)
+static int tosa_bat_probe(struct platform_device *dev)
{
int ret;
@@ -409,7 +409,7 @@
return ret;
}
-static int __devexit tosa_bat_remove(struct platform_device *dev)
+static int tosa_bat_remove(struct platform_device *dev)
{
free_irq(gpio_to_irq(TOSA_GPIO_JACKET_DETECT), &tosa_bat_jacket);
free_irq(gpio_to_irq(TOSA_GPIO_BAT1_CRG), &tosa_bat_jacket);
@@ -433,7 +433,7 @@
.driver.name = "wm97xx-battery",
.driver.owner = THIS_MODULE,
.probe = tosa_bat_probe,
- .remove = __devexit_p(tosa_bat_remove),
+ .remove = tosa_bat_remove,
.suspend = tosa_bat_suspend,
.resume = tosa_bat_resume,
};
diff --git a/drivers/power/wm831x_backup.c b/drivers/power/wm831x_backup.c
index 6243e69..d9cc169 100644
--- a/drivers/power/wm831x_backup.c
+++ b/drivers/power/wm831x_backup.c
@@ -161,7 +161,7 @@
* Initialisation
*********************************************************************/
-static __devinit int wm831x_backup_probe(struct platform_device *pdev)
+static int wm831x_backup_probe(struct platform_device *pdev)
{
struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
struct wm831x_pdata *wm831x_pdata = wm831x->dev->platform_data;
@@ -207,7 +207,7 @@
return ret;
}
-static __devexit int wm831x_backup_remove(struct platform_device *pdev)
+static int wm831x_backup_remove(struct platform_device *pdev)
{
struct wm831x_backup *devdata = platform_get_drvdata(pdev);
@@ -220,7 +220,7 @@
static struct platform_driver wm831x_backup_driver = {
.probe = wm831x_backup_probe,
- .remove = __devexit_p(wm831x_backup_remove),
+ .remove = wm831x_backup_remove,
.driver = {
.name = "wm831x-backup",
},
diff --git a/drivers/power/wm831x_power.c b/drivers/power/wm831x_power.c
index fc1ad95..3bed2f5 100644
--- a/drivers/power/wm831x_power.c
+++ b/drivers/power/wm831x_power.c
@@ -489,7 +489,7 @@
return IRQ_HANDLED;
}
-static __devinit int wm831x_power_probe(struct platform_device *pdev)
+static int wm831x_power_probe(struct platform_device *pdev)
{
struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
struct wm831x_pdata *wm831x_pdata = wm831x->dev->platform_data;
@@ -625,7 +625,7 @@
return ret;
}
-static __devexit int wm831x_power_remove(struct platform_device *pdev)
+static int wm831x_power_remove(struct platform_device *pdev)
{
struct wm831x_power *wm831x_power = platform_get_drvdata(pdev);
struct wm831x *wm831x = wm831x_power->wm831x;
@@ -654,7 +654,7 @@
static struct platform_driver wm831x_power_driver = {
.probe = wm831x_power_probe,
- .remove = __devexit_p(wm831x_power_remove),
+ .remove = wm831x_power_remove,
.driver = {
.name = "wm831x-power",
},
diff --git a/drivers/power/wm8350_power.c b/drivers/power/wm8350_power.c
index fae04d3..b3607e2 100644
--- a/drivers/power/wm8350_power.c
+++ b/drivers/power/wm8350_power.c
@@ -442,7 +442,7 @@
wm8350_free_irq(wm8350, WM8350_IRQ_EXT_BAT_FB, wm8350);
}
-static __devinit int wm8350_power_probe(struct platform_device *pdev)
+static int wm8350_power_probe(struct platform_device *pdev)
{
struct wm8350 *wm8350 = platform_get_drvdata(pdev);
struct wm8350_power *power = &wm8350->power;
@@ -501,7 +501,7 @@
return ret;
}
-static __devexit int wm8350_power_remove(struct platform_device *pdev)
+static int wm8350_power_remove(struct platform_device *pdev)
{
struct wm8350 *wm8350 = platform_get_drvdata(pdev);
struct wm8350_power *power = &wm8350->power;
@@ -516,7 +516,7 @@
static struct platform_driver wm8350_power_driver = {
.probe = wm8350_power_probe,
- .remove = __devexit_p(wm8350_power_remove),
+ .remove = wm8350_power_remove,
.driver = {
.name = "wm8350-power",
},
diff --git a/drivers/power/wm97xx_battery.c b/drivers/power/wm97xx_battery.c
index e128a81..58f7348 100644
--- a/drivers/power/wm97xx_battery.c
+++ b/drivers/power/wm97xx_battery.c
@@ -162,7 +162,7 @@
};
#endif
-static int __devinit wm97xx_bat_probe(struct platform_device *dev)
+static int wm97xx_bat_probe(struct platform_device *dev)
{
int ret = 0;
int props = 1; /* POWER_SUPPLY_PROP_PRESENT */
@@ -263,7 +263,7 @@
return ret;
}
-static int __devexit wm97xx_bat_remove(struct platform_device *dev)
+static int wm97xx_bat_remove(struct platform_device *dev)
{
struct wm97xx_pdata *wmdata = dev->dev.platform_data;
struct wm97xx_batt_pdata *pdata = wmdata->batt_pdata;
@@ -287,7 +287,7 @@
#endif
},
.probe = wm97xx_bat_probe,
- .remove = __devexit_p(wm97xx_bat_remove),
+ .remove = wm97xx_bat_remove,
};
module_platform_driver(wm97xx_bat_driver);
diff --git a/drivers/power/z2_battery.c b/drivers/power/z2_battery.c
index 5757d0d..814d2e3 100644
--- a/drivers/power/z2_battery.c
+++ b/drivers/power/z2_battery.c
@@ -180,7 +180,7 @@
return 0;
}
-static int __devinit z2_batt_probe(struct i2c_client *client,
+static int z2_batt_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
int ret = 0;
@@ -251,7 +251,7 @@
return ret;
}
-static int __devexit z2_batt_remove(struct i2c_client *client)
+static int z2_batt_remove(struct i2c_client *client)
{
struct z2_charger *charger = i2c_get_clientdata(client);
struct z2_battery_info *info = charger->info;
@@ -313,7 +313,7 @@
.pm = Z2_BATTERY_PM_OPS
},
.probe = z2_batt_probe,
- .remove = __devexit_p(z2_batt_remove),
+ .remove = z2_batt_remove,
.id_table = z2_batt_id,
};
module_i2c_driver(z2_batt_driver);
diff --git a/drivers/ptp/ptp_pch.c b/drivers/ptp/ptp_pch.c
index e624e4d..1367655 100644
--- a/drivers/ptp/ptp_pch.c
+++ b/drivers/ptp/ptp_pch.c
@@ -557,7 +557,7 @@
#define pch_resume NULL
#endif
-static void __devexit pch_remove(struct pci_dev *pdev)
+static void pch_remove(struct pci_dev *pdev)
{
struct pch_dev *chip = pci_get_drvdata(pdev);
@@ -581,7 +581,7 @@
dev_info(&pdev->dev, "complete\n");
}
-static s32 __devinit
+static s32
pch_probe(struct pci_dev *pdev, const struct pci_device_id *id)
{
s32 ret;
diff --git a/drivers/pwm/pwm-ab8500.c b/drivers/pwm/pwm-ab8500.c
index cfb72ca..4248d04 100644
--- a/drivers/pwm/pwm-ab8500.c
+++ b/drivers/pwm/pwm-ab8500.c
@@ -90,7 +90,7 @@
.disable = ab8500_pwm_disable,
};
-static int __devinit ab8500_pwm_probe(struct platform_device *pdev)
+static int ab8500_pwm_probe(struct platform_device *pdev)
{
struct ab8500_pwm_chip *ab8500;
int err;
@@ -122,7 +122,7 @@
return 0;
}
-static int __devexit ab8500_pwm_remove(struct platform_device *pdev)
+static int ab8500_pwm_remove(struct platform_device *pdev)
{
struct ab8500_pwm_chip *ab8500 = platform_get_drvdata(pdev);
int err;
@@ -143,7 +143,7 @@
.owner = THIS_MODULE,
},
.probe = ab8500_pwm_probe,
- .remove = __devexit_p(ab8500_pwm_remove),
+ .remove = ab8500_pwm_remove,
};
module_platform_driver(ab8500_pwm_driver);
diff --git a/drivers/pwm/pwm-bfin.c b/drivers/pwm/pwm-bfin.c
index 5da8e18..7631ef1 100644
--- a/drivers/pwm/pwm-bfin.c
+++ b/drivers/pwm/pwm-bfin.c
@@ -139,7 +139,7 @@
return 0;
}
-static int __devexit bfin_pwm_remove(struct platform_device *pdev)
+static int bfin_pwm_remove(struct platform_device *pdev)
{
struct bfin_pwm_chip *pwm = platform_get_drvdata(pdev);
@@ -151,7 +151,7 @@
.name = "bfin-pwm",
},
.probe = bfin_pwm_probe,
- .remove = __devexit_p(bfin_pwm_remove),
+ .remove = bfin_pwm_remove,
};
module_platform_driver(bfin_pwm_driver);
diff --git a/drivers/pwm/pwm-imx.c b/drivers/pwm/pwm-imx.c
index 8a5d3ae..8f26e9f 100644
--- a/drivers/pwm/pwm-imx.c
+++ b/drivers/pwm/pwm-imx.c
@@ -231,7 +231,7 @@
};
MODULE_DEVICE_TABLE(of, imx_pwm_dt_ids);
-static int __devinit imx_pwm_probe(struct platform_device *pdev)
+static int imx_pwm_probe(struct platform_device *pdev)
{
const struct of_device_id *of_id =
of_match_device(imx_pwm_dt_ids, &pdev->dev);
@@ -290,7 +290,7 @@
return 0;
}
-static int __devexit imx_pwm_remove(struct platform_device *pdev)
+static int imx_pwm_remove(struct platform_device *pdev)
{
struct imx_chip *imx;
@@ -307,7 +307,7 @@
.of_match_table = of_match_ptr(imx_pwm_dt_ids),
},
.probe = imx_pwm_probe,
- .remove = __devexit_p(imx_pwm_remove),
+ .remove = imx_pwm_remove,
};
module_platform_driver(imx_pwm_driver);
diff --git a/drivers/pwm/pwm-jz4740.c b/drivers/pwm/pwm-jz4740.c
index 10250fc..0a2ede3 100644
--- a/drivers/pwm/pwm-jz4740.c
+++ b/drivers/pwm/pwm-jz4740.c
@@ -162,7 +162,7 @@
.owner = THIS_MODULE,
};
-static int __devinit jz4740_pwm_probe(struct platform_device *pdev)
+static int jz4740_pwm_probe(struct platform_device *pdev)
{
struct jz4740_pwm_chip *jz4740;
int ret;
@@ -191,7 +191,7 @@
return 0;
}
-static int __devexit jz4740_pwm_remove(struct platform_device *pdev)
+static int jz4740_pwm_remove(struct platform_device *pdev)
{
struct jz4740_pwm_chip *jz4740 = platform_get_drvdata(pdev);
int ret;
@@ -211,7 +211,7 @@
.owner = THIS_MODULE,
},
.probe = jz4740_pwm_probe,
- .remove = __devexit_p(jz4740_pwm_remove),
+ .remove = jz4740_pwm_remove,
};
module_platform_driver(jz4740_pwm_driver);
diff --git a/drivers/pwm/pwm-lpc32xx.c b/drivers/pwm/pwm-lpc32xx.c
index adb87f0..015a822 100644
--- a/drivers/pwm/pwm-lpc32xx.c
+++ b/drivers/pwm/pwm-lpc32xx.c
@@ -118,7 +118,7 @@
return 0;
}
-static int __devexit lpc32xx_pwm_remove(struct platform_device *pdev)
+static int lpc32xx_pwm_remove(struct platform_device *pdev)
{
struct lpc32xx_pwm_chip *lpc32xx = platform_get_drvdata(pdev);
@@ -138,7 +138,7 @@
.of_match_table = of_match_ptr(lpc32xx_pwm_dt_ids),
},
.probe = lpc32xx_pwm_probe,
- .remove = __devexit_p(lpc32xx_pwm_remove),
+ .remove = lpc32xx_pwm_remove,
};
module_platform_driver(lpc32xx_pwm_driver);
diff --git a/drivers/pwm/pwm-mxs.c b/drivers/pwm/pwm-mxs.c
index e585264..7ec345f 100644
--- a/drivers/pwm/pwm-mxs.c
+++ b/drivers/pwm/pwm-mxs.c
@@ -174,7 +174,7 @@
return 0;
}
-static int __devexit mxs_pwm_remove(struct platform_device *pdev)
+static int mxs_pwm_remove(struct platform_device *pdev)
{
struct mxs_pwm_chip *mxs = platform_get_drvdata(pdev);
@@ -193,7 +193,7 @@
.of_match_table = of_match_ptr(mxs_pwm_dt_ids),
},
.probe = mxs_pwm_probe,
- .remove = __devexit_p(mxs_pwm_remove),
+ .remove = mxs_pwm_remove,
};
module_platform_driver(mxs_pwm_driver);
diff --git a/drivers/pwm/pwm-puv3.c b/drivers/pwm/pwm-puv3.c
index 2a93f37..b882f60 100644
--- a/drivers/pwm/pwm-puv3.c
+++ b/drivers/pwm/pwm-puv3.c
@@ -101,7 +101,7 @@
.owner = THIS_MODULE,
};
-static int __devinit pwm_probe(struct platform_device *pdev)
+static int pwm_probe(struct platform_device *pdev)
{
struct puv3_pwm_chip *puv3;
struct resource *r;
@@ -142,7 +142,7 @@
return 0;
}
-static int __devexit pwm_remove(struct platform_device *pdev)
+static int pwm_remove(struct platform_device *pdev)
{
struct puv3_pwm_chip *puv3 = platform_get_drvdata(pdev);
@@ -154,7 +154,7 @@
.name = "PKUnity-v3-PWM",
},
.probe = pwm_probe,
- .remove = __devexit_p(pwm_remove),
+ .remove = pwm_remove,
};
module_platform_driver(puv3_pwm_driver);
diff --git a/drivers/pwm/pwm-pxa.c b/drivers/pwm/pwm-pxa.c
index 260c3a8..f32fc4e 100644
--- a/drivers/pwm/pwm-pxa.c
+++ b/drivers/pwm/pwm-pxa.c
@@ -135,7 +135,7 @@
.owner = THIS_MODULE,
};
-static int __devinit pwm_probe(struct platform_device *pdev)
+static int pwm_probe(struct platform_device *pdev)
{
const struct platform_device_id *id = platform_get_device_id(pdev);
struct pxa_pwm_chip *pwm;
@@ -179,7 +179,7 @@
return 0;
}
-static int __devexit pwm_remove(struct platform_device *pdev)
+static int pwm_remove(struct platform_device *pdev)
{
struct pxa_pwm_chip *chip;
@@ -196,7 +196,7 @@
.owner = THIS_MODULE,
},
.probe = pwm_probe,
- .remove = __devexit_p(pwm_remove),
+ .remove = pwm_remove,
.id_table = pwm_id_table,
};
diff --git a/drivers/pwm/pwm-samsung.c b/drivers/pwm/pwm-samsung.c
index 023a3be..e9b15d0 100644
--- a/drivers/pwm/pwm-samsung.c
+++ b/drivers/pwm/pwm-samsung.c
@@ -273,7 +273,7 @@
return ret;
}
-static int __devexit s3c_pwm_remove(struct platform_device *pdev)
+static int s3c_pwm_remove(struct platform_device *pdev)
{
struct s3c_chip *s3c = platform_get_drvdata(pdev);
int err;
@@ -327,7 +327,7 @@
.owner = THIS_MODULE,
},
.probe = s3c_pwm_probe,
- .remove = __devexit_p(s3c_pwm_remove),
+ .remove = s3c_pwm_remove,
.suspend = s3c_pwm_suspend,
.resume = s3c_pwm_resume,
};
diff --git a/drivers/pwm/pwm-tegra.c b/drivers/pwm/pwm-tegra.c
index 057465e..30c0e2b 100644
--- a/drivers/pwm/pwm-tegra.c
+++ b/drivers/pwm/pwm-tegra.c
@@ -210,7 +210,7 @@
return 0;
}
-static int __devexit tegra_pwm_remove(struct platform_device *pdev)
+static int tegra_pwm_remove(struct platform_device *pdev)
{
struct tegra_pwm_chip *pc = platform_get_drvdata(pdev);
int i;
@@ -249,7 +249,7 @@
.of_match_table = of_match_ptr(tegra_pwm_of_match),
},
.probe = tegra_pwm_probe,
- .remove = __devexit_p(tegra_pwm_remove),
+ .remove = tegra_pwm_remove,
};
module_platform_driver(tegra_pwm_driver);
diff --git a/drivers/pwm/pwm-tiecap.c b/drivers/pwm/pwm-tiecap.c
index d6d4cf0..87c091b 100644
--- a/drivers/pwm/pwm-tiecap.c
+++ b/drivers/pwm/pwm-tiecap.c
@@ -184,7 +184,7 @@
.owner = THIS_MODULE,
};
-static int __devinit ecap_pwm_probe(struct platform_device *pdev)
+static int ecap_pwm_probe(struct platform_device *pdev)
{
int ret;
struct resource *r;
@@ -235,7 +235,7 @@
return 0;
}
-static int __devexit ecap_pwm_remove(struct platform_device *pdev)
+static int ecap_pwm_remove(struct platform_device *pdev)
{
struct ecap_pwm_chip *pc = platform_get_drvdata(pdev);
@@ -249,7 +249,7 @@
.name = "ecap",
},
.probe = ecap_pwm_probe,
- .remove = __devexit_p(ecap_pwm_remove),
+ .remove = ecap_pwm_remove,
};
module_platform_driver(ecap_pwm_driver);
diff --git a/drivers/pwm/pwm-tiehrpwm.c b/drivers/pwm/pwm-tiehrpwm.c
index d3c1dff..9ffd389 100644
--- a/drivers/pwm/pwm-tiehrpwm.c
+++ b/drivers/pwm/pwm-tiehrpwm.c
@@ -392,7 +392,7 @@
.owner = THIS_MODULE,
};
-static int __devinit ehrpwm_pwm_probe(struct platform_device *pdev)
+static int ehrpwm_pwm_probe(struct platform_device *pdev)
{
int ret;
struct resource *r;
@@ -443,7 +443,7 @@
return 0;
}
-static int __devexit ehrpwm_pwm_remove(struct platform_device *pdev)
+static int ehrpwm_pwm_remove(struct platform_device *pdev)
{
struct ehrpwm_pwm_chip *pc = platform_get_drvdata(pdev);
@@ -457,7 +457,7 @@
.name = "ehrpwm",
},
.probe = ehrpwm_pwm_probe,
- .remove = __devexit_p(ehrpwm_pwm_remove),
+ .remove = ehrpwm_pwm_remove,
};
module_platform_driver(ehrpwm_pwm_driver);
diff --git a/drivers/pwm/pwm-twl6030.c b/drivers/pwm/pwm-twl6030.c
index 8e63878..378a7e2 100644
--- a/drivers/pwm/pwm-twl6030.c
+++ b/drivers/pwm/pwm-twl6030.c
@@ -176,7 +176,7 @@
.name = "twl6030-pwm",
},
.probe = twl6030_pwm_probe,
- .remove = __devexit_p(twl6030_pwm_remove),
+ .remove = twl6030_pwm_remove,
};
module_platform_driver(twl6030_pwm_driver);
diff --git a/drivers/rapidio/devices/tsi721.c b/drivers/rapidio/devices/tsi721.c
index 38ecd8f..6faba40 100644
--- a/drivers/rapidio/devices/tsi721.c
+++ b/drivers/rapidio/devices/tsi721.c
@@ -2202,7 +2202,7 @@
*
* Configures Tsi721 as RapidIO master port.
*/
-static int __devinit tsi721_setup_mport(struct tsi721_device *priv)
+static int tsi721_setup_mport(struct tsi721_device *priv)
{
struct pci_dev *pdev = priv->pdev;
int err = 0;
@@ -2302,7 +2302,7 @@
return err;
}
-static int __devinit tsi721_probe(struct pci_dev *pdev,
+static int tsi721_probe(struct pci_dev *pdev,
const struct pci_device_id *id)
{
struct tsi721_device *priv;
diff --git a/drivers/rapidio/devices/tsi721.h b/drivers/rapidio/devices/tsi721.h
index 7d5b13b..b4b0d83 100644
--- a/drivers/rapidio/devices/tsi721.h
+++ b/drivers/rapidio/devices/tsi721.h
@@ -846,7 +846,7 @@
#ifdef CONFIG_RAPIDIO_DMA_ENGINE
extern void tsi721_bdma_handler(struct tsi721_bdma_chan *bdma_chan);
-extern int __devinit tsi721_register_dma(struct tsi721_device *priv);
+extern int tsi721_register_dma(struct tsi721_device *priv);
#endif
#endif
diff --git a/drivers/rapidio/devices/tsi721_dma.c b/drivers/rapidio/devices/tsi721_dma.c
index 92e06a5..502663f 100644
--- a/drivers/rapidio/devices/tsi721_dma.c
+++ b/drivers/rapidio/devices/tsi721_dma.c
@@ -765,7 +765,7 @@
return 0;
}
-int __devinit tsi721_register_dma(struct tsi721_device *priv)
+int tsi721_register_dma(struct tsi721_device *priv)
{
int i;
int nr_channels = TSI721_DMA_MAXCH;
diff --git a/drivers/rapidio/rio-scan.c b/drivers/rapidio/rio-scan.c
index 07da58b..a965acd 100644
--- a/drivers/rapidio/rio-scan.c
+++ b/drivers/rapidio/rio-scan.c
@@ -371,7 +371,7 @@
* device to the RIO device list. Creates the generic sysfs nodes
* for an RIO device.
*/
-static int __devinit rio_add_device(struct rio_dev *rdev)
+static int rio_add_device(struct rio_dev *rdev)
{
int err;
@@ -463,7 +463,7 @@
* to a RIO device on success or NULL on failure.
*
*/
-static struct rio_dev __devinit *rio_setup_device(struct rio_net *net,
+static struct rio_dev *rio_setup_device(struct rio_net *net,
struct rio_mport *port, u16 destid,
u8 hopcount, int do_enum)
{
@@ -837,7 +837,7 @@
* Recursively enumerates a RIO network. Transactions are sent via the
* master port passed in @port.
*/
-static int __devinit rio_enum_peer(struct rio_net *net, struct rio_mport *port,
+static int rio_enum_peer(struct rio_net *net, struct rio_mport *port,
u8 hopcount, struct rio_dev *prev, int prev_port)
{
struct rio_dev *rdev;
@@ -1044,7 +1044,7 @@
* Recursively discovers a RIO network. Transactions are sent via the
* master port passed in @port.
*/
-static int __devinit
+static int
rio_disc_peer(struct rio_net *net, struct rio_mport *port, u16 destid,
u8 hopcount, struct rio_dev *prev, int prev_port)
{
@@ -1151,7 +1151,7 @@
* network list of associated master ports. Returns a
* RIO network pointer on success or %NULL on failure.
*/
-static struct rio_net __devinit *rio_alloc_net(struct rio_mport *port,
+static struct rio_net *rio_alloc_net(struct rio_mport *port,
int do_enum, u16 start)
{
struct rio_net *net;
@@ -1266,7 +1266,7 @@
* link, then start recursive peer enumeration. Returns %0 if
* enumeration succeeds or %-EBUSY if enumeration fails.
*/
-int __devinit rio_enum_mport(struct rio_mport *mport)
+int rio_enum_mport(struct rio_mport *mport)
{
struct rio_net *net = NULL;
int rc = 0;
@@ -1369,7 +1369,7 @@
* peer discovery. Returns %0 if discovery succeeds or %-EBUSY
* on failure.
*/
-int __devinit rio_disc_mport(struct rio_mport *mport)
+int rio_disc_mport(struct rio_mport *mport)
{
struct rio_net *net = NULL;
unsigned long to_end;
diff --git a/drivers/rapidio/rio.c b/drivers/rapidio/rio.c
index 0c6fcb4..d553b5d 100644
--- a/drivers/rapidio/rio.c
+++ b/drivers/rapidio/rio.c
@@ -1250,7 +1250,7 @@
{
}
-static int __devinit rio_init(void)
+static int rio_init(void)
{
struct rio_dev *dev = NULL;
@@ -1267,7 +1267,7 @@
struct rio_mport *mport;
};
-static void __devinit disc_work_handler(struct work_struct *_work)
+static void disc_work_handler(struct work_struct *_work)
{
struct rio_disc_work *work;
@@ -1277,7 +1277,7 @@
rio_disc_mport(work->mport);
}
-int __devinit rio_init_mports(void)
+int rio_init_mports(void)
{
struct rio_mport *port;
struct rio_disc_work *work;
diff --git a/drivers/s390/char/con3215.c b/drivers/s390/char/con3215.c
index 4ed343e..4008450 100644
--- a/drivers/s390/char/con3215.c
+++ b/drivers/s390/char/con3215.c
@@ -677,6 +677,7 @@
{
kfree(raw->inbuf);
kfree(raw->buffer);
+ tty_port_destroy(&raw->port);
kfree(raw);
}
diff --git a/drivers/s390/char/sclp_tty.c b/drivers/s390/char/sclp_tty.c
index 30ec09e..877fbc3 100644
--- a/drivers/s390/char/sclp_tty.c
+++ b/drivers/s390/char/sclp_tty.c
@@ -547,7 +547,6 @@
sclp_tty_tolower = 1;
}
sclp_tty_chars_count = 0;
- tty_port_init(&sclp_port);
rc = sclp_register(&sclp_input_event);
if (rc) {
@@ -555,6 +554,8 @@
return rc;
}
+ tty_port_init(&sclp_port);
+
driver->driver_name = "sclp_line";
driver->name = "sclp_line";
driver->major = TTY_MAJOR;
@@ -571,6 +572,7 @@
rc = tty_register_driver(driver);
if (rc) {
put_tty_driver(driver);
+ tty_port_destroy(&sclp_port);
return rc;
}
sclp_tty_driver = driver;
diff --git a/drivers/s390/char/sclp_vt220.c b/drivers/s390/char/sclp_vt220.c
index 7e60f3d..effcc87 100644
--- a/drivers/s390/char/sclp_vt220.c
+++ b/drivers/s390/char/sclp_vt220.c
@@ -615,6 +615,7 @@
return;
sclp_unregister(&sclp_vt220_register);
__sclp_vt220_free_pages();
+ tty_port_destroy(&sclp_vt220_port);
}
/* Allocate buffer pages and register with sclp core. Controlled by init
@@ -650,6 +651,7 @@
if (rc) {
__sclp_vt220_free_pages();
sclp_vt220_init_count--;
+ tty_port_destroy(&sclp_vt220_port);
}
return rc;
}
diff --git a/drivers/s390/char/tty3270.c b/drivers/s390/char/tty3270.c
index 482ee02..43ea059 100644
--- a/drivers/s390/char/tty3270.c
+++ b/drivers/s390/char/tty3270.c
@@ -722,6 +722,7 @@
while (pages--)
free_pages((unsigned long) tp->freemem_pages[pages], 0);
kfree(tp->freemem_pages);
+ tty_port_destroy(&tp->port);
out_tp:
kfree(tp);
out_err:
@@ -744,6 +745,7 @@
for (pages = 0; pages < TTY3270_STRING_PAGES; pages++)
free_pages((unsigned long) tp->freemem_pages[pages], 0);
kfree(tp->freemem_pages);
+ tty_port_destroy(&tp->port);
kfree(tp);
}
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index d3e6408..718cc1f 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -35,6 +35,8 @@
#include <linux/sched.h>
#include <linux/delay.h>
#include <linux/kthread.h>
+#include <linux/ioport.h>
+#include <linux/acpi.h>
static void spidev_release(struct device *dev)
{
@@ -93,6 +95,10 @@
if (of_driver_match_device(dev, drv))
return 1;
+ /* Then try ACPI */
+ if (acpi_driver_match_device(dev, drv))
+ return 1;
+
if (sdrv->id_table)
return !!spi_match_id(sdrv->id_table, spi);
@@ -888,6 +894,100 @@
static void of_register_spi_devices(struct spi_master *master) { }
#endif
+#ifdef CONFIG_ACPI
+static int acpi_spi_add_resource(struct acpi_resource *ares, void *data)
+{
+ struct spi_device *spi = data;
+
+ if (ares->type == ACPI_RESOURCE_TYPE_SERIAL_BUS) {
+ struct acpi_resource_spi_serialbus *sb;
+
+ sb = &ares->data.spi_serial_bus;
+ if (sb->type == ACPI_RESOURCE_SERIAL_TYPE_SPI) {
+ spi->chip_select = sb->device_selection;
+ spi->max_speed_hz = sb->connection_speed;
+
+ if (sb->clock_phase == ACPI_SPI_SECOND_PHASE)
+ spi->mode |= SPI_CPHA;
+ if (sb->clock_polarity == ACPI_SPI_START_HIGH)
+ spi->mode |= SPI_CPOL;
+ if (sb->device_polarity == ACPI_SPI_ACTIVE_HIGH)
+ spi->mode |= SPI_CS_HIGH;
+ }
+ } else if (spi->irq < 0) {
+ struct resource r;
+
+ if (acpi_dev_resource_interrupt(ares, 0, &r))
+ spi->irq = r.start;
+ }
+
+ /* Always tell the ACPI core to skip this resource */
+ return 1;
+}
+
+static acpi_status acpi_spi_add_device(acpi_handle handle, u32 level,
+ void *data, void **return_value)
+{
+ struct spi_master *master = data;
+ struct list_head resource_list;
+ struct acpi_device *adev;
+ struct spi_device *spi;
+ int ret;
+
+ if (acpi_bus_get_device(handle, &adev))
+ return AE_OK;
+ if (acpi_bus_get_status(adev) || !adev->status.present)
+ return AE_OK;
+
+ spi = spi_alloc_device(master);
+ if (!spi) {
+ dev_err(&master->dev, "failed to allocate SPI device for %s\n",
+ dev_name(&adev->dev));
+ return AE_NO_MEMORY;
+ }
+
+ ACPI_HANDLE_SET(&spi->dev, handle);
+ spi->irq = -1;
+
+ INIT_LIST_HEAD(&resource_list);
+ ret = acpi_dev_get_resources(adev, &resource_list,
+ acpi_spi_add_resource, spi);
+ acpi_dev_free_resource_list(&resource_list);
+
+ if (ret < 0 || !spi->max_speed_hz) {
+ spi_dev_put(spi);
+ return AE_OK;
+ }
+
+ strlcpy(spi->modalias, dev_name(&adev->dev), sizeof(spi->modalias));
+ if (spi_add_device(spi)) {
+ dev_err(&master->dev, "failed to add SPI device %s from ACPI\n",
+ dev_name(&adev->dev));
+ spi_dev_put(spi);
+ }
+
+ return AE_OK;
+}
+
+static void acpi_register_spi_devices(struct spi_master *master)
+{
+ acpi_status status;
+ acpi_handle handle;
+
+ handle = ACPI_HANDLE(&master->dev);
+ if (!handle)
+ return;
+
+ status = acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, 1,
+ acpi_spi_add_device, NULL,
+ master, NULL);
+ if (ACPI_FAILURE(status))
+ dev_warn(&master->dev, "failed to enumerate SPI slaves\n");
+}
+#else
+static inline void acpi_register_spi_devices(struct spi_master *master) {}
+#endif /* CONFIG_ACPI */
+
static void spi_master_release(struct device *dev)
{
struct spi_master *master;
@@ -1023,8 +1123,9 @@
spi_match_master_to_boardinfo(master, &bi->board_info);
mutex_unlock(&board_lock);
- /* Register devices from the device tree */
+ /* Register devices from the device tree and ACPI */
of_register_spi_devices(master);
+ acpi_register_spi_devices(master);
done:
return status;
}
diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index d805eef..329bdb4 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -52,8 +52,6 @@
source "drivers/staging/rtl8712/Kconfig"
-source "drivers/staging/rts_pstor/Kconfig"
-
source "drivers/staging/rts5139/Kconfig"
source "drivers/staging/frontier/Kconfig"
@@ -120,14 +118,10 @@
source "drivers/staging/android/Kconfig"
-source "drivers/staging/telephony/Kconfig"
-
source "drivers/staging/ozwpan/Kconfig"
source "drivers/staging/ccg/Kconfig"
-source "drivers/staging/ipack/Kconfig"
-
source "drivers/staging/gdm72xx/Kconfig"
source "drivers/staging/csr/Kconfig"
@@ -144,4 +138,8 @@
source "drivers/staging/dgrp/Kconfig"
+source "drivers/staging/sb105x/Kconfig"
+
+source "drivers/staging/fwserial/Kconfig"
+
endif # STAGING
diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
index 76e2ebd..c7ec486 100644
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -19,7 +19,6 @@
obj-$(CONFIG_RTL8192U) += rtl8192u/
obj-$(CONFIG_RTL8192E) += rtl8192e/
obj-$(CONFIG_R8712U) += rtl8712/
-obj-$(CONFIG_RTS_PSTOR) += rts_pstor/
obj-$(CONFIG_RTS5139) += rts5139/
obj-$(CONFIG_TRANZPORT) += frontier/
obj-$(CONFIG_IDE_PHISON) += phison/
@@ -29,7 +28,6 @@
obj-$(CONFIG_VT6655) += vt6655/
obj-$(CONFIG_VT6656) += vt6656/
obj-$(CONFIG_VME_BUS) += vme/
-obj-$(CONFIG_IPACK_BUS) += ipack/
obj-$(CONFIG_DX_SEP) += sep/
obj-$(CONFIG_IIO) += iio/
obj-$(CONFIG_ZRAM) += zram/
@@ -53,7 +51,6 @@
obj-$(CONFIG_MFD_NVEC) += nvec/
obj-$(CONFIG_DRM_OMAP) += omapdrm/
obj-$(CONFIG_ANDROID) += android/
-obj-$(CONFIG_PHONE) += telephony/
obj-$(CONFIG_USB_WPAN_HCD) += ozwpan/
obj-$(CONFIG_USB_G_CCG) += ccg/
obj-$(CONFIG_WIMAX_GDM72XX) += gdm72xx/
@@ -64,3 +61,5 @@
obj-$(CONFIG_CED1401) += ced1401/
obj-$(CONFIG_DRM_IMX) += imx-drm/
obj-$(CONFIG_DGRP) += dgrp/
+obj-$(CONFIG_SB105X) += sb105x/
+obj-$(CONFIG_FIREWIRE_SERIAL) += fwserial/
diff --git a/drivers/staging/android/Makefile b/drivers/staging/android/Makefile
index e16fcd5..b35a631 100644
--- a/drivers/staging/android/Makefile
+++ b/drivers/staging/android/Makefile
@@ -1,3 +1,5 @@
+ccflags-y += -I$(src) # needed for trace events
+
obj-$(CONFIG_ANDROID_BINDER_IPC) += binder.o
obj-$(CONFIG_ASHMEM) += ashmem.o
obj-$(CONFIG_ANDROID_LOGGER) += logger.o
diff --git a/drivers/staging/android/binder.c b/drivers/staging/android/binder.c
index 5d4610b..4a36e9a 100644
--- a/drivers/staging/android/binder.c
+++ b/drivers/staging/android/binder.c
@@ -15,6 +15,8 @@
*
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <asm/cacheflush.h>
#include <linux/fdtable.h>
#include <linux/file.h>
@@ -35,8 +37,9 @@
#include <linux/slab.h>
#include "binder.h"
+#include "binder_trace.h"
-static DEFINE_MUTEX(binder_lock);
+static DEFINE_MUTEX(binder_main_lock);
static DEFINE_MUTEX(binder_deferred_lock);
static DEFINE_MUTEX(binder_mmap_lock);
@@ -411,6 +414,19 @@
return retval;
}
+static inline void binder_lock(const char *tag)
+{
+ trace_binder_lock(tag);
+ mutex_lock(&binder_main_lock);
+ trace_binder_locked(tag);
+}
+
+static inline void binder_unlock(const char *tag)
+{
+ trace_binder_unlock(tag);
+ mutex_unlock(&binder_main_lock);
+}
+
static void binder_set_nice(long nice)
{
long min_nice;
@@ -420,12 +436,12 @@
}
min_nice = 20 - current->signal->rlim[RLIMIT_NICE].rlim_cur;
binder_debug(BINDER_DEBUG_PRIORITY_CAP,
- "binder: %d: nice value %ld not allowed use "
- "%ld instead\n", current->pid, nice, min_nice);
+ "%d: nice value %ld not allowed use %ld instead\n",
+ current->pid, nice, min_nice);
set_user_nice(current, min_nice);
if (min_nice < 20)
return;
- binder_user_error("binder: %d RLIMIT_NICE not set\n", current->pid);
+ binder_user_error("%d RLIMIT_NICE not set\n", current->pid);
}
static size_t binder_buffer_size(struct binder_proc *proc,
@@ -452,8 +468,8 @@
new_buffer_size = binder_buffer_size(proc, new_buffer);
binder_debug(BINDER_DEBUG_BUFFER_ALLOC,
- "binder: %d: add free buffer, size %zd, "
- "at %p\n", proc->pid, new_buffer_size, new_buffer);
+ "%d: add free buffer, size %zd, at %p\n",
+ proc->pid, new_buffer_size, new_buffer);
while (*p) {
parent = *p;
@@ -531,12 +547,14 @@
struct mm_struct *mm;
binder_debug(BINDER_DEBUG_BUFFER_ALLOC,
- "binder: %d: %s pages %p-%p\n", proc->pid,
+ "%d: %s pages %p-%p\n", proc->pid,
allocate ? "allocate" : "free", start, end);
if (end <= start)
return 0;
+ trace_binder_update_page_range(proc, allocate, start, end);
+
if (vma)
mm = NULL;
else
@@ -546,7 +564,7 @@
down_write(&mm->mmap_sem);
vma = proc->vma;
if (vma && mm != proc->vma_vm_mm) {
- pr_err("binder: %d: vma mm and task mm mismatch\n",
+ pr_err("%d: vma mm and task mm mismatch\n",
proc->pid);
vma = NULL;
}
@@ -556,8 +574,8 @@
goto free_range;
if (vma == NULL) {
- pr_err("binder: %d: binder_alloc_buf failed to "
- "map pages in userspace, no vma\n", proc->pid);
+ pr_err("%d: binder_alloc_buf failed to map pages in userspace, no vma\n",
+ proc->pid);
goto err_no_vma;
}
@@ -569,8 +587,8 @@
BUG_ON(*page);
*page = alloc_page(GFP_KERNEL | __GFP_HIGHMEM | __GFP_ZERO);
if (*page == NULL) {
- pr_err("binder: %d: binder_alloc_buf failed "
- "for page at %p\n", proc->pid, page_addr);
+ pr_err("%d: binder_alloc_buf failed for page at %p\n",
+ proc->pid, page_addr);
goto err_alloc_page_failed;
}
tmp_area.addr = page_addr;
@@ -578,8 +596,7 @@
page_array_ptr = page;
ret = map_vm_area(&tmp_area, PAGE_KERNEL, &page_array_ptr);
if (ret) {
- pr_err("binder: %d: binder_alloc_buf failed "
- "to map page at %p in kernel\n",
+ pr_err("%d: binder_alloc_buf failed to map page at %p in kernel\n",
proc->pid, page_addr);
goto err_map_kernel_failed;
}
@@ -587,8 +604,7 @@
(uintptr_t)page_addr + proc->user_buffer_offset;
ret = vm_insert_page(vma, user_page_addr, page[0]);
if (ret) {
- pr_err("binder: %d: binder_alloc_buf failed "
- "to map page at %lx in userspace\n",
+ pr_err("%d: binder_alloc_buf failed to map page at %lx in userspace\n",
proc->pid, user_page_addr);
goto err_vm_insert_page_failed;
}
@@ -636,7 +652,7 @@
size_t size;
if (proc->vma == NULL) {
- pr_err("binder: %d: binder_alloc_buf, no vma\n",
+ pr_err("%d: binder_alloc_buf, no vma\n",
proc->pid);
return NULL;
}
@@ -645,16 +661,16 @@
ALIGN(offsets_size, sizeof(void *));
if (size < data_size || size < offsets_size) {
- binder_user_error("binder: %d: got transaction with invalid "
- "size %zd-%zd\n", proc->pid, data_size, offsets_size);
+ binder_user_error("%d: got transaction with invalid size %zd-%zd\n",
+ proc->pid, data_size, offsets_size);
return NULL;
}
if (is_async &&
proc->free_async_space < size + sizeof(struct binder_buffer)) {
binder_debug(BINDER_DEBUG_BUFFER_ALLOC,
- "binder: %d: binder_alloc_buf size %zd"
- "failed, no async space left\n", proc->pid, size);
+ "%d: binder_alloc_buf size %zd failed, no async space left\n",
+ proc->pid, size);
return NULL;
}
@@ -674,8 +690,8 @@
}
}
if (best_fit == NULL) {
- pr_err("binder: %d: binder_alloc_buf size %zd failed, "
- "no address space\n", proc->pid, size);
+ pr_err("%d: binder_alloc_buf size %zd failed, no address space\n",
+ proc->pid, size);
return NULL;
}
if (n == NULL) {
@@ -684,8 +700,8 @@
}
binder_debug(BINDER_DEBUG_BUFFER_ALLOC,
- "binder: %d: binder_alloc_buf size %zd got buff"
- "er %p size %zd\n", proc->pid, size, buffer, buffer_size);
+ "%d: binder_alloc_buf size %zd got buffer %p size %zd\n",
+ proc->pid, size, buffer, buffer_size);
has_page_addr =
(void *)(((uintptr_t)buffer->data + buffer_size) & PAGE_MASK);
@@ -713,17 +729,16 @@
binder_insert_free_buffer(proc, new_buffer);
}
binder_debug(BINDER_DEBUG_BUFFER_ALLOC,
- "binder: %d: binder_alloc_buf size %zd got "
- "%p\n", proc->pid, size, buffer);
+ "%d: binder_alloc_buf size %zd got %p\n",
+ proc->pid, size, buffer);
buffer->data_size = data_size;
buffer->offsets_size = offsets_size;
buffer->async_transaction = is_async;
if (is_async) {
proc->free_async_space -= size + sizeof(struct binder_buffer);
binder_debug(BINDER_DEBUG_BUFFER_ALLOC_ASYNC,
- "binder: %d: binder_alloc_buf size %zd "
- "async free %zd\n", proc->pid, size,
- proc->free_async_space);
+ "%d: binder_alloc_buf size %zd async free %zd\n",
+ proc->pid, size, proc->free_async_space);
}
return buffer;
@@ -754,8 +769,8 @@
if (buffer_end_page(prev) == buffer_end_page(buffer))
free_page_end = 0;
binder_debug(BINDER_DEBUG_BUFFER_ALLOC,
- "binder: %d: merge free, buffer %p "
- "share page with %p\n", proc->pid, buffer, prev);
+ "%d: merge free, buffer %p share page with %p\n",
+ proc->pid, buffer, prev);
}
if (!list_is_last(&buffer->entry, &proc->buffers)) {
@@ -767,16 +782,14 @@
buffer_start_page(buffer))
free_page_start = 0;
binder_debug(BINDER_DEBUG_BUFFER_ALLOC,
- "binder: %d: merge free, buffer"
- " %p share page with %p\n", proc->pid,
- buffer, prev);
+ "%d: merge free, buffer %p share page with %p\n",
+ proc->pid, buffer, prev);
}
}
list_del(&buffer->entry);
if (free_page_start || free_page_end) {
binder_debug(BINDER_DEBUG_BUFFER_ALLOC,
- "binder: %d: merge free, buffer %p do "
- "not share page%s%s with with %p or %p\n",
+ "%d: merge free, buffer %p do not share page%s%s with with %p or %p\n",
proc->pid, buffer, free_page_start ? "" : " end",
free_page_end ? "" : " start", prev, next);
binder_update_page_range(proc, 0, free_page_start ?
@@ -797,8 +810,8 @@
ALIGN(buffer->offsets_size, sizeof(void *));
binder_debug(BINDER_DEBUG_BUFFER_ALLOC,
- "binder: %d: binder_free_buf %p size %zd buffer"
- "_size %zd\n", proc->pid, buffer, size, buffer_size);
+ "%d: binder_free_buf %p size %zd buffer_size %zd\n",
+ proc->pid, buffer, size, buffer_size);
BUG_ON(buffer->free);
BUG_ON(size > buffer_size);
@@ -810,9 +823,8 @@
proc->free_async_space += size + sizeof(struct binder_buffer);
binder_debug(BINDER_DEBUG_BUFFER_ALLOC_ASYNC,
- "binder: %d: binder_free_buf size %zd "
- "async free %zd\n", proc->pid, size,
- proc->free_async_space);
+ "%d: binder_free_buf size %zd async free %zd\n",
+ proc->pid, size, proc->free_async_space);
}
binder_update_page_range(proc, 0,
@@ -894,7 +906,7 @@
INIT_LIST_HEAD(&node->work.entry);
INIT_LIST_HEAD(&node->async_todo);
binder_debug(BINDER_DEBUG_INTERNAL_REFS,
- "binder: %d:%d node %d u%p c%p created\n",
+ "%d:%d node %d u%p c%p created\n",
proc->pid, current->pid, node->debug_id,
node->ptr, node->cookie);
return node;
@@ -909,8 +921,8 @@
node->internal_strong_refs == 0 &&
!(node == binder_context_mgr_node &&
node->has_strong_ref)) {
- pr_err("binder: invalid inc strong "
- "node for %d\n", node->debug_id);
+ pr_err("invalid inc strong node for %d\n",
+ node->debug_id);
return -EINVAL;
}
node->internal_strong_refs++;
@@ -925,8 +937,8 @@
node->local_weak_refs++;
if (!node->has_weak_ref && list_empty(&node->work.entry)) {
if (target_list == NULL) {
- pr_err("binder: invalid inc weak node "
- "for %d\n", node->debug_id);
+ pr_err("invalid inc weak node for %d\n",
+ node->debug_id);
return -EINVAL;
}
list_add_tail(&node->work.entry, target_list);
@@ -962,12 +974,12 @@
if (node->proc) {
rb_erase(&node->rb_node, &node->proc->nodes);
binder_debug(BINDER_DEBUG_INTERNAL_REFS,
- "binder: refless node %d deleted\n",
+ "refless node %d deleted\n",
node->debug_id);
} else {
hlist_del(&node->dead_node);
binder_debug(BINDER_DEBUG_INTERNAL_REFS,
- "binder: dead node %d deleted\n",
+ "dead node %d deleted\n",
node->debug_id);
}
kfree(node);
@@ -1053,14 +1065,13 @@
hlist_add_head(&new_ref->node_entry, &node->refs);
binder_debug(BINDER_DEBUG_INTERNAL_REFS,
- "binder: %d new ref %d desc %d for "
- "node %d\n", proc->pid, new_ref->debug_id,
- new_ref->desc, node->debug_id);
+ "%d new ref %d desc %d for node %d\n",
+ proc->pid, new_ref->debug_id, new_ref->desc,
+ node->debug_id);
} else {
binder_debug(BINDER_DEBUG_INTERNAL_REFS,
- "binder: %d new ref %d desc %d for "
- "dead node\n", proc->pid, new_ref->debug_id,
- new_ref->desc);
+ "%d new ref %d desc %d for dead node\n",
+ proc->pid, new_ref->debug_id, new_ref->desc);
}
return new_ref;
}
@@ -1068,9 +1079,9 @@
static void binder_delete_ref(struct binder_ref *ref)
{
binder_debug(BINDER_DEBUG_INTERNAL_REFS,
- "binder: %d delete ref %d desc %d for "
- "node %d\n", ref->proc->pid, ref->debug_id,
- ref->desc, ref->node->debug_id);
+ "%d delete ref %d desc %d for node %d\n",
+ ref->proc->pid, ref->debug_id, ref->desc,
+ ref->node->debug_id);
rb_erase(&ref->rb_node_desc, &ref->proc->refs_by_desc);
rb_erase(&ref->rb_node_node, &ref->proc->refs_by_node);
@@ -1080,9 +1091,8 @@
binder_dec_node(ref->node, 0, 1);
if (ref->death) {
binder_debug(BINDER_DEBUG_DEAD_BINDER,
- "binder: %d delete ref %d desc %d "
- "has death notification\n", ref->proc->pid,
- ref->debug_id, ref->desc);
+ "%d delete ref %d desc %d has death notification\n",
+ ref->proc->pid, ref->debug_id, ref->desc);
list_del(&ref->death->work.entry);
kfree(ref->death);
binder_stats_deleted(BINDER_STAT_DEATH);
@@ -1118,8 +1128,7 @@
{
if (strong) {
if (ref->strong == 0) {
- binder_user_error("binder: %d invalid dec strong, "
- "ref %d desc %d s %d w %d\n",
+ binder_user_error("%d invalid dec strong, ref %d desc %d s %d w %d\n",
ref->proc->pid, ref->debug_id,
ref->desc, ref->strong, ref->weak);
return -EINVAL;
@@ -1133,8 +1142,7 @@
}
} else {
if (ref->weak == 0) {
- binder_user_error("binder: %d invalid dec weak, "
- "ref %d desc %d s %d w %d\n",
+ binder_user_error("%d invalid dec weak, ref %d desc %d s %d w %d\n",
ref->proc->pid, ref->debug_id,
ref->desc, ref->strong, ref->weak);
return -EINVAL;
@@ -1179,8 +1187,7 @@
}
if (target_thread->return_error == BR_OK) {
binder_debug(BINDER_DEBUG_FAILED_TRANSACTION,
- "binder: send failed reply for "
- "transaction %d to %d:%d\n",
+ "send failed reply for transaction %d to %d:%d\n",
t->debug_id, target_thread->proc->pid,
target_thread->pid);
@@ -1188,9 +1195,8 @@
target_thread->return_error = error_code;
wake_up_interruptible(&target_thread->wait);
} else {
- pr_err("binder: reply failed, target "
- "thread, %d:%d, has error code %d "
- "already\n", target_thread->proc->pid,
+ pr_err("reply failed, target thread, %d:%d, has error code %d already\n",
+ target_thread->proc->pid,
target_thread->pid,
target_thread->return_error);
}
@@ -1199,21 +1205,19 @@
struct binder_transaction *next = t->from_parent;
binder_debug(BINDER_DEBUG_FAILED_TRANSACTION,
- "binder: send failed reply "
- "for transaction %d, target dead\n",
+ "send failed reply for transaction %d, target dead\n",
t->debug_id);
binder_pop_transaction(target_thread, t);
if (next == NULL) {
binder_debug(BINDER_DEBUG_DEAD_BINDER,
- "binder: reply failed,"
- " no target thread at root\n");
+ "reply failed, no target thread at root\n");
return;
}
t = next;
binder_debug(BINDER_DEBUG_DEAD_BINDER,
- "binder: reply failed, no target "
- "thread -- retry %d\n", t->debug_id);
+ "reply failed, no target thread -- retry %d\n",
+ t->debug_id);
}
}
}
@@ -1226,7 +1230,7 @@
int debug_id = buffer->debug_id;
binder_debug(BINDER_DEBUG_TRANSACTION,
- "binder: %d buffer release %d, size %zd-%zd, failed at %p\n",
+ "%d buffer release %d, size %zd-%zd, failed at %p\n",
proc->pid, buffer->debug_id,
buffer->data_size, buffer->offsets_size, failed_at);
@@ -1243,9 +1247,8 @@
if (*offp > buffer->data_size - sizeof(*fp) ||
buffer->data_size < sizeof(*fp) ||
!IS_ALIGNED(*offp, sizeof(void *))) {
- pr_err("binder: transaction release %d bad"
- "offset %zd, size %zd\n", debug_id,
- *offp, buffer->data_size);
+ pr_err("transaction release %d bad offset %zd, size %zd\n",
+ debug_id, *offp, buffer->data_size);
continue;
}
fp = (struct flat_binder_object *)(buffer->data + *offp);
@@ -1254,8 +1257,8 @@
case BINDER_TYPE_WEAK_BINDER: {
struct binder_node *node = binder_get_node(proc, fp->binder);
if (node == NULL) {
- pr_err("binder: transaction release %d"
- " bad node %p\n", debug_id, fp->binder);
+ pr_err("transaction release %d bad node %p\n",
+ debug_id, fp->binder);
break;
}
binder_debug(BINDER_DEBUG_TRANSACTION,
@@ -1267,9 +1270,8 @@
case BINDER_TYPE_WEAK_HANDLE: {
struct binder_ref *ref = binder_get_ref(proc, fp->handle);
if (ref == NULL) {
- pr_err("binder: transaction release %d"
- " bad handle %ld\n", debug_id,
- fp->handle);
+ pr_err("transaction release %d bad handle %ld\n",
+ debug_id, fp->handle);
break;
}
binder_debug(BINDER_DEBUG_TRANSACTION,
@@ -1286,8 +1288,8 @@
break;
default:
- pr_err("binder: transaction release %d bad "
- "object type %lx\n", debug_id, fp->type);
+ pr_err("transaction release %d bad object type %lx\n",
+ debug_id, fp->type);
break;
}
}
@@ -1320,17 +1322,14 @@
if (reply) {
in_reply_to = thread->transaction_stack;
if (in_reply_to == NULL) {
- binder_user_error("binder: %d:%d got reply transaction "
- "with no transaction stack\n",
+ binder_user_error("%d:%d got reply transaction with no transaction stack\n",
proc->pid, thread->pid);
return_error = BR_FAILED_REPLY;
goto err_empty_call_stack;
}
binder_set_nice(in_reply_to->saved_priority);
if (in_reply_to->to_thread != thread) {
- binder_user_error("binder: %d:%d got reply transaction "
- "with bad transaction stack,"
- " transaction %d has target %d:%d\n",
+ binder_user_error("%d:%d got reply transaction with bad transaction stack, transaction %d has target %d:%d\n",
proc->pid, thread->pid, in_reply_to->debug_id,
in_reply_to->to_proc ?
in_reply_to->to_proc->pid : 0,
@@ -1347,9 +1346,7 @@
goto err_dead_binder;
}
if (target_thread->transaction_stack != in_reply_to) {
- binder_user_error("binder: %d:%d got reply transaction "
- "with bad target transaction stack %d, "
- "expected %d\n",
+ binder_user_error("%d:%d got reply transaction with bad target transaction stack %d, expected %d\n",
proc->pid, thread->pid,
target_thread->transaction_stack ?
target_thread->transaction_stack->debug_id : 0,
@@ -1365,8 +1362,7 @@
struct binder_ref *ref;
ref = binder_get_ref(proc, tr->target.handle);
if (ref == NULL) {
- binder_user_error("binder: %d:%d got "
- "transaction to invalid handle\n",
+ binder_user_error("%d:%d got transaction to invalid handle\n",
proc->pid, thread->pid);
return_error = BR_FAILED_REPLY;
goto err_invalid_target_handle;
@@ -1389,9 +1385,7 @@
struct binder_transaction *tmp;
tmp = thread->transaction_stack;
if (tmp->to_thread != thread) {
- binder_user_error("binder: %d:%d got new "
- "transaction with bad transaction stack"
- ", transaction %d has target %d:%d\n",
+ binder_user_error("%d:%d got new transaction with bad transaction stack, transaction %d has target %d:%d\n",
proc->pid, thread->pid, tmp->debug_id,
tmp->to_proc ? tmp->to_proc->pid : 0,
tmp->to_thread ?
@@ -1436,16 +1430,14 @@
if (reply)
binder_debug(BINDER_DEBUG_TRANSACTION,
- "binder: %d:%d BC_REPLY %d -> %d:%d, "
- "data %p-%p size %zd-%zd\n",
+ "%d:%d BC_REPLY %d -> %d:%d, data %p-%p size %zd-%zd\n",
proc->pid, thread->pid, t->debug_id,
target_proc->pid, target_thread->pid,
tr->data.ptr.buffer, tr->data.ptr.offsets,
tr->data_size, tr->offsets_size);
else
binder_debug(BINDER_DEBUG_TRANSACTION,
- "binder: %d:%d BC_TRANSACTION %d -> "
- "%d - node %d, data %p-%p size %zd-%zd\n",
+ "%d:%d BC_TRANSACTION %d -> %d - node %d, data %p-%p size %zd-%zd\n",
proc->pid, thread->pid, t->debug_id,
target_proc->pid, target_node->debug_id,
tr->data.ptr.buffer, tr->data.ptr.offsets,
@@ -1461,6 +1453,9 @@
t->code = tr->code;
t->flags = tr->flags;
t->priority = task_nice(current);
+
+ trace_binder_transaction(reply, t, target_node);
+
t->buffer = binder_alloc_buf(target_proc, tr->data_size,
tr->offsets_size, !reply && (t->flags & TF_ONE_WAY));
if (t->buffer == NULL) {
@@ -1471,27 +1466,27 @@
t->buffer->debug_id = t->debug_id;
t->buffer->transaction = t;
t->buffer->target_node = target_node;
+ trace_binder_transaction_alloc_buf(t->buffer);
if (target_node)
binder_inc_node(target_node, 1, 0, NULL);
offp = (size_t *)(t->buffer->data + ALIGN(tr->data_size, sizeof(void *)));
if (copy_from_user(t->buffer->data, tr->data.ptr.buffer, tr->data_size)) {
- binder_user_error("binder: %d:%d got transaction with invalid "
- "data ptr\n", proc->pid, thread->pid);
+ binder_user_error("%d:%d got transaction with invalid data ptr\n",
+ proc->pid, thread->pid);
return_error = BR_FAILED_REPLY;
goto err_copy_data_failed;
}
if (copy_from_user(offp, tr->data.ptr.offsets, tr->offsets_size)) {
- binder_user_error("binder: %d:%d got transaction with invalid "
- "offsets ptr\n", proc->pid, thread->pid);
+ binder_user_error("%d:%d got transaction with invalid offsets ptr\n",
+ proc->pid, thread->pid);
return_error = BR_FAILED_REPLY;
goto err_copy_data_failed;
}
if (!IS_ALIGNED(tr->offsets_size, sizeof(size_t))) {
- binder_user_error("binder: %d:%d got transaction with "
- "invalid offsets size, %zd\n",
- proc->pid, thread->pid, tr->offsets_size);
+ binder_user_error("%d:%d got transaction with invalid offsets size, %zd\n",
+ proc->pid, thread->pid, tr->offsets_size);
return_error = BR_FAILED_REPLY;
goto err_bad_offset;
}
@@ -1501,9 +1496,8 @@
if (*offp > t->buffer->data_size - sizeof(*fp) ||
t->buffer->data_size < sizeof(*fp) ||
!IS_ALIGNED(*offp, sizeof(void *))) {
- binder_user_error("binder: %d:%d got transaction with "
- "invalid offset, %zd\n",
- proc->pid, thread->pid, *offp);
+ binder_user_error("%d:%d got transaction with invalid offset, %zd\n",
+ proc->pid, thread->pid, *offp);
return_error = BR_FAILED_REPLY;
goto err_bad_offset;
}
@@ -1523,8 +1517,7 @@
node->accept_fds = !!(fp->flags & FLAT_BINDER_FLAG_ACCEPTS_FDS);
}
if (fp->cookie != node->cookie) {
- binder_user_error("binder: %d:%d sending u%p "
- "node %d, cookie mismatch %p != %p\n",
+ binder_user_error("%d:%d sending u%p node %d, cookie mismatch %p != %p\n",
proc->pid, thread->pid,
fp->binder, node->debug_id,
fp->cookie, node->cookie);
@@ -1543,6 +1536,7 @@
binder_inc_ref(ref, fp->type == BINDER_TYPE_HANDLE,
&thread->todo);
+ trace_binder_transaction_node_to_ref(t, node, ref);
binder_debug(BINDER_DEBUG_TRANSACTION,
" node %d u%p -> ref %d desc %d\n",
node->debug_id, node->ptr, ref->debug_id,
@@ -1552,10 +1546,9 @@
case BINDER_TYPE_WEAK_HANDLE: {
struct binder_ref *ref = binder_get_ref(proc, fp->handle);
if (ref == NULL) {
- binder_user_error("binder: %d:%d got "
- "transaction with invalid "
- "handle, %ld\n", proc->pid,
- thread->pid, fp->handle);
+ binder_user_error("%d:%d got transaction with invalid handle, %ld\n",
+ proc->pid,
+ thread->pid, fp->handle);
return_error = BR_FAILED_REPLY;
goto err_binder_get_ref_failed;
}
@@ -1567,6 +1560,7 @@
fp->binder = ref->node->ptr;
fp->cookie = ref->node->cookie;
binder_inc_node(ref->node, fp->type == BINDER_TYPE_BINDER, 0, NULL);
+ trace_binder_transaction_ref_to_node(t, ref);
binder_debug(BINDER_DEBUG_TRANSACTION,
" ref %d desc %d -> node %d u%p\n",
ref->debug_id, ref->desc, ref->node->debug_id,
@@ -1580,6 +1574,8 @@
}
fp->handle = new_ref->desc;
binder_inc_ref(new_ref, fp->type == BINDER_TYPE_HANDLE, NULL);
+ trace_binder_transaction_ref_to_ref(t, ref,
+ new_ref);
binder_debug(BINDER_DEBUG_TRANSACTION,
" ref %d desc %d -> ref %d desc %d (node %d)\n",
ref->debug_id, ref->desc, new_ref->debug_id,
@@ -1593,13 +1589,13 @@
if (reply) {
if (!(in_reply_to->flags & TF_ACCEPT_FDS)) {
- binder_user_error("binder: %d:%d got reply with fd, %ld, but target does not allow fds\n",
+ binder_user_error("%d:%d got reply with fd, %ld, but target does not allow fds\n",
proc->pid, thread->pid, fp->handle);
return_error = BR_FAILED_REPLY;
goto err_fd_not_allowed;
}
} else if (!target_node->accept_fds) {
- binder_user_error("binder: %d:%d got transaction with fd, %ld, but target does not allow fds\n",
+ binder_user_error("%d:%d got transaction with fd, %ld, but target does not allow fds\n",
proc->pid, thread->pid, fp->handle);
return_error = BR_FAILED_REPLY;
goto err_fd_not_allowed;
@@ -1607,7 +1603,7 @@
file = fget(fp->handle);
if (file == NULL) {
- binder_user_error("binder: %d:%d got transaction with invalid fd, %ld\n",
+ binder_user_error("%d:%d got transaction with invalid fd, %ld\n",
proc->pid, thread->pid, fp->handle);
return_error = BR_FAILED_REPLY;
goto err_fget_failed;
@@ -1619,6 +1615,7 @@
goto err_get_unused_fd_failed;
}
task_fd_install(target_proc, target_fd, file);
+ trace_binder_transaction_fd(t, fp->handle, target_fd);
binder_debug(BINDER_DEBUG_TRANSACTION,
" fd %ld -> %d\n", fp->handle, target_fd);
/* TODO: fput? */
@@ -1626,8 +1623,7 @@
} break;
default:
- binder_user_error("binder: %d:%d got transactio"
- "n with invalid object type, %lx\n",
+ binder_user_error("%d:%d got transaction with invalid object type, %lx\n",
proc->pid, thread->pid, fp->type);
return_error = BR_FAILED_REPLY;
goto err_bad_object_type;
@@ -1667,6 +1663,7 @@
err_bad_object_type:
err_bad_offset:
err_copy_data_failed:
+ trace_binder_transaction_failed_buffer_release(t->buffer);
binder_transaction_buffer_release(target_proc, t->buffer, offp);
t->buffer->transaction = NULL;
binder_free_buf(target_proc, t->buffer);
@@ -1683,7 +1680,7 @@
err_invalid_target_handle:
err_no_context_mgr_node:
binder_debug(BINDER_DEBUG_FAILED_TRANSACTION,
- "binder: %d:%d transaction failed %d, size %zd-%zd\n",
+ "%d:%d transaction failed %d, size %zd-%zd\n",
proc->pid, thread->pid, return_error,
tr->data_size, tr->offsets_size);
@@ -1712,6 +1709,7 @@
if (get_user(cmd, (uint32_t __user *)ptr))
return -EFAULT;
ptr += sizeof(uint32_t);
+ trace_binder_command(cmd);
if (_IOC_NR(cmd) < ARRAY_SIZE(binder_stats.bc)) {
binder_stats.bc[_IOC_NR(cmd)]++;
proc->stats.bc[_IOC_NR(cmd)]++;
@@ -1734,18 +1732,14 @@
ref = binder_get_ref_for_node(proc,
binder_context_mgr_node);
if (ref->desc != target) {
- binder_user_error("binder: %d:"
- "%d tried to acquire "
- "reference to desc 0, "
- "got %d instead\n",
+ binder_user_error("%d:%d tried to acquire reference to desc 0, got %d instead\n",
proc->pid, thread->pid,
ref->desc);
}
} else
ref = binder_get_ref(proc, target);
if (ref == NULL) {
- binder_user_error("binder: %d:%d refcou"
- "nt change on invalid ref %d\n",
+ binder_user_error("%d:%d refcount change on invalid ref %d\n",
proc->pid, thread->pid, target);
break;
}
@@ -1769,7 +1763,7 @@
break;
}
binder_debug(BINDER_DEBUG_USER_REFS,
- "binder: %d:%d %s ref %d desc %d s %d w %d for node %d\n",
+ "%d:%d %s ref %d desc %d s %d w %d for node %d\n",
proc->pid, thread->pid, debug_string, ref->debug_id,
ref->desc, ref->strong, ref->weak, ref->node->debug_id);
break;
@@ -1788,8 +1782,7 @@
ptr += sizeof(void *);
node = binder_get_node(proc, node_ptr);
if (node == NULL) {
- binder_user_error("binder: %d:%d "
- "%s u%p no match\n",
+ binder_user_error("%d:%d %s u%p no match\n",
proc->pid, thread->pid,
cmd == BC_INCREFS_DONE ?
"BC_INCREFS_DONE" :
@@ -1798,8 +1791,7 @@
break;
}
if (cookie != node->cookie) {
- binder_user_error("binder: %d:%d %s u%p node %d"
- " cookie mismatch %p != %p\n",
+ binder_user_error("%d:%d %s u%p node %d cookie mismatch %p != %p\n",
proc->pid, thread->pid,
cmd == BC_INCREFS_DONE ?
"BC_INCREFS_DONE" : "BC_ACQUIRE_DONE",
@@ -1809,9 +1801,7 @@
}
if (cmd == BC_ACQUIRE_DONE) {
if (node->pending_strong_ref == 0) {
- binder_user_error("binder: %d:%d "
- "BC_ACQUIRE_DONE node %d has "
- "no pending acquire request\n",
+ binder_user_error("%d:%d BC_ACQUIRE_DONE node %d has no pending acquire request\n",
proc->pid, thread->pid,
node->debug_id);
break;
@@ -1819,9 +1809,7 @@
node->pending_strong_ref = 0;
} else {
if (node->pending_weak_ref == 0) {
- binder_user_error("binder: %d:%d "
- "BC_INCREFS_DONE node %d has "
- "no pending increfs request\n",
+ binder_user_error("%d:%d BC_INCREFS_DONE node %d has no pending increfs request\n",
proc->pid, thread->pid,
node->debug_id);
break;
@@ -1830,17 +1818,17 @@
}
binder_dec_node(node, cmd == BC_ACQUIRE_DONE, 0);
binder_debug(BINDER_DEBUG_USER_REFS,
- "binder: %d:%d %s node %d ls %d lw %d\n",
+ "%d:%d %s node %d ls %d lw %d\n",
proc->pid, thread->pid,
cmd == BC_INCREFS_DONE ? "BC_INCREFS_DONE" : "BC_ACQUIRE_DONE",
node->debug_id, node->local_strong_refs, node->local_weak_refs);
break;
}
case BC_ATTEMPT_ACQUIRE:
- pr_err("binder: BC_ATTEMPT_ACQUIRE not supported\n");
+ pr_err("BC_ATTEMPT_ACQUIRE not supported\n");
return -EINVAL;
case BC_ACQUIRE_RESULT:
- pr_err("binder: BC_ACQUIRE_RESULT not supported\n");
+ pr_err("BC_ACQUIRE_RESULT not supported\n");
return -EINVAL;
case BC_FREE_BUFFER: {
@@ -1853,20 +1841,17 @@
buffer = binder_buffer_lookup(proc, data_ptr);
if (buffer == NULL) {
- binder_user_error("binder: %d:%d "
- "BC_FREE_BUFFER u%p no match\n",
+ binder_user_error("%d:%d BC_FREE_BUFFER u%p no match\n",
proc->pid, thread->pid, data_ptr);
break;
}
if (!buffer->allow_user_free) {
- binder_user_error("binder: %d:%d "
- "BC_FREE_BUFFER u%p matched "
- "unreturned buffer\n",
+ binder_user_error("%d:%d BC_FREE_BUFFER u%p matched unreturned buffer\n",
proc->pid, thread->pid, data_ptr);
break;
}
binder_debug(BINDER_DEBUG_FREE_BUFFER,
- "binder: %d:%d BC_FREE_BUFFER u%p found buffer %d for %s transaction\n",
+ "%d:%d BC_FREE_BUFFER u%p found buffer %d for %s transaction\n",
proc->pid, thread->pid, data_ptr, buffer->debug_id,
buffer->transaction ? "active" : "finished");
@@ -1881,6 +1866,7 @@
else
list_move_tail(buffer->target_node->async_todo.next, &thread->todo);
}
+ trace_binder_transaction_buffer_release(buffer);
binder_transaction_buffer_release(proc, buffer, NULL);
binder_free_buf(proc, buffer);
break;
@@ -1899,19 +1885,15 @@
case BC_REGISTER_LOOPER:
binder_debug(BINDER_DEBUG_THREADS,
- "binder: %d:%d BC_REGISTER_LOOPER\n",
+ "%d:%d BC_REGISTER_LOOPER\n",
proc->pid, thread->pid);
if (thread->looper & BINDER_LOOPER_STATE_ENTERED) {
thread->looper |= BINDER_LOOPER_STATE_INVALID;
- binder_user_error("binder: %d:%d ERROR:"
- " BC_REGISTER_LOOPER called "
- "after BC_ENTER_LOOPER\n",
+ binder_user_error("%d:%d ERROR: BC_REGISTER_LOOPER called after BC_ENTER_LOOPER\n",
proc->pid, thread->pid);
} else if (proc->requested_threads == 0) {
thread->looper |= BINDER_LOOPER_STATE_INVALID;
- binder_user_error("binder: %d:%d ERROR:"
- " BC_REGISTER_LOOPER called "
- "without request\n",
+ binder_user_error("%d:%d ERROR: BC_REGISTER_LOOPER called without request\n",
proc->pid, thread->pid);
} else {
proc->requested_threads--;
@@ -1921,20 +1903,18 @@
break;
case BC_ENTER_LOOPER:
binder_debug(BINDER_DEBUG_THREADS,
- "binder: %d:%d BC_ENTER_LOOPER\n",
+ "%d:%d BC_ENTER_LOOPER\n",
proc->pid, thread->pid);
if (thread->looper & BINDER_LOOPER_STATE_REGISTERED) {
thread->looper |= BINDER_LOOPER_STATE_INVALID;
- binder_user_error("binder: %d:%d ERROR:"
- " BC_ENTER_LOOPER called after "
- "BC_REGISTER_LOOPER\n",
+ binder_user_error("%d:%d ERROR: BC_ENTER_LOOPER called after BC_REGISTER_LOOPER\n",
proc->pid, thread->pid);
}
thread->looper |= BINDER_LOOPER_STATE_ENTERED;
break;
case BC_EXIT_LOOPER:
binder_debug(BINDER_DEBUG_THREADS,
- "binder: %d:%d BC_EXIT_LOOPER\n",
+ "%d:%d BC_EXIT_LOOPER\n",
proc->pid, thread->pid);
thread->looper |= BINDER_LOOPER_STATE_EXITED;
break;
@@ -1954,8 +1934,7 @@
ptr += sizeof(void *);
ref = binder_get_ref(proc, target);
if (ref == NULL) {
- binder_user_error("binder: %d:%d %s "
- "invalid ref %d\n",
+ binder_user_error("%d:%d %s invalid ref %d\n",
proc->pid, thread->pid,
cmd == BC_REQUEST_DEATH_NOTIFICATION ?
"BC_REQUEST_DEATH_NOTIFICATION" :
@@ -1965,7 +1944,7 @@
}
binder_debug(BINDER_DEBUG_DEATH_NOTIFICATION,
- "binder: %d:%d %s %p ref %d desc %d s %d w %d for node %d\n",
+ "%d:%d %s %p ref %d desc %d s %d w %d for node %d\n",
proc->pid, thread->pid,
cmd == BC_REQUEST_DEATH_NOTIFICATION ?
"BC_REQUEST_DEATH_NOTIFICATION" :
@@ -1975,10 +1954,7 @@
if (cmd == BC_REQUEST_DEATH_NOTIFICATION) {
if (ref->death) {
- binder_user_error("binder: %d:%"
- "d BC_REQUEST_DEATH_NOTI"
- "FICATION death notific"
- "ation already set\n",
+ binder_user_error("%d:%d BC_REQUEST_DEATH_NOTIFICATION death notification already set\n",
proc->pid, thread->pid);
break;
}
@@ -1986,8 +1962,7 @@
if (death == NULL) {
thread->return_error = BR_ERROR;
binder_debug(BINDER_DEBUG_FAILED_TRANSACTION,
- "binder: %d:%d "
- "BC_REQUEST_DEATH_NOTIFICATION failed\n",
+ "%d:%d BC_REQUEST_DEATH_NOTIFICATION failed\n",
proc->pid, thread->pid);
break;
}
@@ -2006,20 +1981,13 @@
}
} else {
if (ref->death == NULL) {
- binder_user_error("binder: %d:%"
- "d BC_CLEAR_DEATH_NOTIFI"
- "CATION death notificat"
- "ion not active\n",
+ binder_user_error("%d:%d BC_CLEAR_DEATH_NOTIFICATION death notification not active\n",
proc->pid, thread->pid);
break;
}
death = ref->death;
if (death->cookie != cookie) {
- binder_user_error("binder: %d:%"
- "d BC_CLEAR_DEATH_NOTIFI"
- "CATION death notificat"
- "ion cookie mismatch "
- "%p != %p\n",
+ binder_user_error("%d:%d BC_CLEAR_DEATH_NOTIFICATION death notification cookie mismatch %p != %p\n",
proc->pid, thread->pid,
death->cookie, cookie);
break;
@@ -2055,11 +2023,10 @@
}
}
binder_debug(BINDER_DEBUG_DEAD_BINDER,
- "binder: %d:%d BC_DEAD_BINDER_DONE %p found %p\n",
+ "%d:%d BC_DEAD_BINDER_DONE %p found %p\n",
proc->pid, thread->pid, cookie, death);
if (death == NULL) {
- binder_user_error("binder: %d:%d BC_DEAD"
- "_BINDER_DONE %p not found\n",
+ binder_user_error("%d:%d BC_DEAD_BINDER_DONE %p not found\n",
proc->pid, thread->pid, cookie);
break;
}
@@ -2077,7 +2044,7 @@
} break;
default:
- pr_err("binder: %d:%d unknown command %d\n",
+ pr_err("%d:%d unknown command %d\n",
proc->pid, thread->pid, cmd);
return -EINVAL;
}
@@ -2089,6 +2056,7 @@
void binder_stat_br(struct binder_proc *proc, struct binder_thread *thread,
uint32_t cmd)
{
+ trace_binder_return(cmd);
if (_IOC_NR(cmd) < ARRAY_SIZE(binder_stats.br)) {
binder_stats.br[_IOC_NR(cmd)]++;
proc->stats.br[_IOC_NR(cmd)]++;
@@ -2135,6 +2103,7 @@
if (put_user(thread->return_error2, (uint32_t __user *)ptr))
return -EFAULT;
ptr += sizeof(uint32_t);
+ binder_stat_br(proc, thread, thread->return_error2);
if (ptr == end)
goto done;
thread->return_error2 = BR_OK;
@@ -2142,6 +2111,7 @@
if (put_user(thread->return_error, (uint32_t __user *)ptr))
return -EFAULT;
ptr += sizeof(uint32_t);
+ binder_stat_br(proc, thread, thread->return_error);
thread->return_error = BR_OK;
goto done;
}
@@ -2150,13 +2120,16 @@
thread->looper |= BINDER_LOOPER_STATE_WAITING;
if (wait_for_proc_work)
proc->ready_threads++;
- mutex_unlock(&binder_lock);
+
+ binder_unlock(__func__);
+
+ trace_binder_wait_for_work(wait_for_proc_work,
+ !!thread->transaction_stack,
+ !list_empty(&thread->todo));
if (wait_for_proc_work) {
if (!(thread->looper & (BINDER_LOOPER_STATE_REGISTERED |
BINDER_LOOPER_STATE_ENTERED))) {
- binder_user_error("binder: %d:%d ERROR: Thread waiting "
- "for process work before calling BC_REGISTER_"
- "LOOPER or BC_ENTER_LOOPER (state %x)\n",
+ binder_user_error("%d:%d ERROR: Thread waiting for process work before calling BC_REGISTER_LOOPER or BC_ENTER_LOOPER (state %x)\n",
proc->pid, thread->pid, thread->looper);
wait_event_interruptible(binder_user_error_wait,
binder_stop_on_user_error < 2);
@@ -2174,7 +2147,9 @@
} else
ret = wait_event_interruptible(thread->wait, binder_has_thread_work(thread));
}
- mutex_lock(&binder_lock);
+
+ binder_lock(__func__);
+
if (wait_for_proc_work)
proc->ready_threads--;
thread->looper &= ~BINDER_LOOPER_STATE_WAITING;
@@ -2213,7 +2188,7 @@
binder_stat_br(proc, thread, cmd);
binder_debug(BINDER_DEBUG_TRANSACTION_COMPLETE,
- "binder: %d:%d BR_TRANSACTION_COMPLETE\n",
+ "%d:%d BR_TRANSACTION_COMPLETE\n",
proc->pid, thread->pid);
list_del(&w->entry);
@@ -2260,13 +2235,13 @@
binder_stat_br(proc, thread, cmd);
binder_debug(BINDER_DEBUG_USER_REFS,
- "binder: %d:%d %s %d u%p c%p\n",
+ "%d:%d %s %d u%p c%p\n",
proc->pid, thread->pid, cmd_name, node->debug_id, node->ptr, node->cookie);
} else {
list_del_init(&w->entry);
if (!weak && !strong) {
binder_debug(BINDER_DEBUG_INTERNAL_REFS,
- "binder: %d:%d node %d u%p c%p deleted\n",
+ "%d:%d node %d u%p c%p deleted\n",
proc->pid, thread->pid, node->debug_id,
node->ptr, node->cookie);
rb_erase(&node->rb_node, &proc->nodes);
@@ -2274,7 +2249,7 @@
binder_stats_deleted(BINDER_STAT_NODE);
} else {
binder_debug(BINDER_DEBUG_INTERNAL_REFS,
- "binder: %d:%d node %d u%p c%p state unchanged\n",
+ "%d:%d node %d u%p c%p state unchanged\n",
proc->pid, thread->pid, node->debug_id, node->ptr,
node->cookie);
}
@@ -2297,8 +2272,9 @@
if (put_user(death->cookie, (void * __user *)ptr))
return -EFAULT;
ptr += sizeof(void *);
+ binder_stat_br(proc, thread, cmd);
binder_debug(BINDER_DEBUG_DEATH_NOTIFICATION,
- "binder: %d:%d %s %p\n",
+ "%d:%d %s %p\n",
proc->pid, thread->pid,
cmd == BR_DEAD_BINDER ?
"BR_DEAD_BINDER" :
@@ -2364,10 +2340,10 @@
return -EFAULT;
ptr += sizeof(tr);
+ trace_binder_transaction_received(t);
binder_stat_br(proc, thread, cmd);
binder_debug(BINDER_DEBUG_TRANSACTION,
- "binder: %d:%d %s %d %d:%d, cmd %d"
- "size %zd-%zd ptr %p-%p\n",
+ "%d:%d %s %d %d:%d, cmd %d size %zd-%zd ptr %p-%p\n",
proc->pid, thread->pid,
(cmd == BR_TRANSACTION) ? "BR_TRANSACTION" :
"BR_REPLY",
@@ -2400,10 +2376,11 @@
/*spawn a new thread if we leave this out */) {
proc->requested_threads++;
binder_debug(BINDER_DEBUG_THREADS,
- "binder: %d:%d BR_SPAWN_LOOPER\n",
+ "%d:%d BR_SPAWN_LOOPER\n",
proc->pid, thread->pid);
if (put_user(BR_SPAWN_LOOPER, (uint32_t __user *)buffer))
return -EFAULT;
+ binder_stat_br(proc, thread, BR_SPAWN_LOOPER);
}
return 0;
}
@@ -2424,7 +2401,7 @@
binder_send_failed_reply(t, BR_DEAD_REPLY);
} else {
binder_debug(BINDER_DEBUG_DEAD_TRANSACTION,
- "binder: undelivered transaction %d\n",
+ "undelivered transaction %d\n",
t->debug_id);
t->buffer->transaction = NULL;
kfree(t);
@@ -2433,7 +2410,7 @@
} break;
case BINDER_WORK_TRANSACTION_COMPLETE: {
binder_debug(BINDER_DEBUG_DEAD_TRANSACTION,
- "binder: undelivered TRANSACTION_COMPLETE\n");
+ "undelivered TRANSACTION_COMPLETE\n");
kfree(w);
binder_stats_deleted(BINDER_STAT_TRANSACTION_COMPLETE);
} break;
@@ -2443,13 +2420,13 @@
death = container_of(w, struct binder_ref_death, work);
binder_debug(BINDER_DEBUG_DEAD_TRANSACTION,
- "binder: undelivered death notification, %p\n",
+ "undelivered death notification, %p\n",
death->cookie);
kfree(death);
binder_stats_deleted(BINDER_STAT_DEATH);
} break;
default:
- pr_err("binder: unexpected work type, %d, not freed\n",
+ pr_err("unexpected work type, %d, not freed\n",
w->type);
break;
}
@@ -2506,8 +2483,8 @@
while (t) {
active_transactions++;
binder_debug(BINDER_DEBUG_DEAD_TRANSACTION,
- "binder: release %d:%d transaction %d "
- "%s, still active\n", proc->pid, thread->pid,
+ "release %d:%d transaction %d %s, still active\n",
+ proc->pid, thread->pid,
t->debug_id,
(t->to_thread == thread) ? "in" : "out");
@@ -2540,12 +2517,14 @@
struct binder_thread *thread = NULL;
int wait_for_proc_work;
- mutex_lock(&binder_lock);
+ binder_lock(__func__);
+
thread = binder_get_thread(proc);
wait_for_proc_work = thread->transaction_stack == NULL &&
list_empty(&thread->todo) && thread->return_error == BR_OK;
- mutex_unlock(&binder_lock);
+
+ binder_unlock(__func__);
if (wait_for_proc_work) {
if (binder_has_proc_work(proc, thread))
@@ -2573,11 +2552,13 @@
/*pr_info("binder_ioctl: %d:%d %x %lx\n", proc->pid, current->pid, cmd, arg);*/
+ trace_binder_ioctl(cmd, arg);
+
ret = wait_event_interruptible(binder_user_error_wait, binder_stop_on_user_error < 2);
if (ret)
- return ret;
+ goto err_unlocked;
- mutex_lock(&binder_lock);
+ binder_lock(__func__);
thread = binder_get_thread(proc);
if (thread == NULL) {
ret = -ENOMEM;
@@ -2596,12 +2577,13 @@
goto err;
}
binder_debug(BINDER_DEBUG_READ_WRITE,
- "binder: %d:%d write %ld at %08lx, read %ld at %08lx\n",
- proc->pid, thread->pid, bwr.write_size, bwr.write_buffer,
- bwr.read_size, bwr.read_buffer);
+ "%d:%d write %ld at %08lx, read %ld at %08lx\n",
+ proc->pid, thread->pid, bwr.write_size,
+ bwr.write_buffer, bwr.read_size, bwr.read_buffer);
if (bwr.write_size > 0) {
ret = binder_thread_write(proc, thread, (void __user *)bwr.write_buffer, bwr.write_size, &bwr.write_consumed);
+ trace_binder_write_done(ret);
if (ret < 0) {
bwr.read_consumed = 0;
if (copy_to_user(ubuf, &bwr, sizeof(bwr)))
@@ -2611,6 +2593,7 @@
}
if (bwr.read_size > 0) {
ret = binder_thread_read(proc, thread, (void __user *)bwr.read_buffer, bwr.read_size, &bwr.read_consumed, filp->f_flags & O_NONBLOCK);
+ trace_binder_read_done(ret);
if (!list_empty(&proc->todo))
wake_up_interruptible(&proc->wait);
if (ret < 0) {
@@ -2620,7 +2603,7 @@
}
}
binder_debug(BINDER_DEBUG_READ_WRITE,
- "binder: %d:%d wrote %ld of %ld, read return %ld of %ld\n",
+ "%d:%d wrote %ld of %ld, read return %ld of %ld\n",
proc->pid, thread->pid, bwr.write_consumed, bwr.write_size,
bwr.read_consumed, bwr.read_size);
if (copy_to_user(ubuf, &bwr, sizeof(bwr))) {
@@ -2637,14 +2620,13 @@
break;
case BINDER_SET_CONTEXT_MGR:
if (binder_context_mgr_node != NULL) {
- pr_err("binder: BINDER_SET_CONTEXT_MGR already set\n");
+ pr_err("BINDER_SET_CONTEXT_MGR already set\n");
ret = -EBUSY;
goto err;
}
if (uid_valid(binder_context_mgr_uid)) {
if (!uid_eq(binder_context_mgr_uid, current->cred->euid)) {
- pr_err("binder: BINDER_SET_"
- "CONTEXT_MGR bad uid %d != %d\n",
+ pr_err("BINDER_SET_CONTEXT_MGR bad uid %d != %d\n",
from_kuid(&init_user_ns, current->cred->euid),
from_kuid(&init_user_ns, binder_context_mgr_uid));
ret = -EPERM;
@@ -2663,7 +2645,7 @@
binder_context_mgr_node->has_weak_ref = 1;
break;
case BINDER_THREAD_EXIT:
- binder_debug(BINDER_DEBUG_THREADS, "binder: %d:%d exit\n",
+ binder_debug(BINDER_DEBUG_THREADS, "%d:%d exit\n",
proc->pid, thread->pid);
binder_free_thread(proc, thread);
thread = NULL;
@@ -2686,10 +2668,12 @@
err:
if (thread)
thread->looper &= ~BINDER_LOOPER_STATE_NEED_RETURN;
- mutex_unlock(&binder_lock);
+ binder_unlock(__func__);
wait_event_interruptible(binder_user_error_wait, binder_stop_on_user_error < 2);
if (ret && ret != -ERESTARTSYS)
- pr_info("binder: %d:%d ioctl %x %lx returned %d\n", proc->pid, current->pid, cmd, arg, ret);
+ pr_info("%d:%d ioctl %x %lx returned %d\n", proc->pid, current->pid, cmd, arg, ret);
+err_unlocked:
+ trace_binder_ioctl_done(ret);
return ret;
}
@@ -2697,7 +2681,7 @@
{
struct binder_proc *proc = vma->vm_private_data;
binder_debug(BINDER_DEBUG_OPEN_CLOSE,
- "binder: %d open vm area %lx-%lx (%ld K) vma %lx pagep %lx\n",
+ "%d open vm area %lx-%lx (%ld K) vma %lx pagep %lx\n",
proc->pid, vma->vm_start, vma->vm_end,
(vma->vm_end - vma->vm_start) / SZ_1K, vma->vm_flags,
(unsigned long)pgprot_val(vma->vm_page_prot));
@@ -2707,7 +2691,7 @@
{
struct binder_proc *proc = vma->vm_private_data;
binder_debug(BINDER_DEBUG_OPEN_CLOSE,
- "binder: %d close vm area %lx-%lx (%ld K) vma %lx pagep %lx\n",
+ "%d close vm area %lx-%lx (%ld K) vma %lx pagep %lx\n",
proc->pid, vma->vm_start, vma->vm_end,
(vma->vm_end - vma->vm_start) / SZ_1K, vma->vm_flags,
(unsigned long)pgprot_val(vma->vm_page_prot));
@@ -2835,13 +2819,16 @@
INIT_LIST_HEAD(&proc->todo);
init_waitqueue_head(&proc->wait);
proc->default_priority = task_nice(current);
- mutex_lock(&binder_lock);
+
+ binder_lock(__func__);
+
binder_stats_created(BINDER_STAT_PROC);
hlist_add_head(&proc->proc_node, &binder_procs);
proc->pid = current->group_leader->pid;
INIT_LIST_HEAD(&proc->delivered_death);
filp->private_data = proc;
- mutex_unlock(&binder_lock);
+
+ binder_unlock(__func__);
if (binder_debugfs_dir_entry_proc) {
char strbuf[11];
@@ -2949,9 +2936,8 @@
}
}
binder_debug(BINDER_DEBUG_DEAD_BINDER,
- "binder: node %d now dead, "
- "refs %d, death %d\n", node->debug_id,
- incoming_refs, death);
+ "node %d now dead, refs %d, death %d\n",
+ node->debug_id, incoming_refs, death);
}
}
outgoing_refs = 0;
@@ -2972,8 +2958,7 @@
if (t) {
t->buffer = NULL;
buffer->transaction = NULL;
- pr_err("binder: release proc %d, "
- "transaction %d, not freed\n",
+ pr_err("release proc %d, transaction %d, not freed\n",
proc->pid, t->debug_id);
/*BUG();*/
}
@@ -2990,8 +2975,7 @@
if (proc->pages[i]) {
void *page_addr = proc->buffer + i * PAGE_SIZE;
binder_debug(BINDER_DEBUG_BUFFER_ALLOC,
- "binder_release: %d: "
- "page %d at %p not freed\n",
+ "binder_release: %d: page %d at %p not freed\n",
proc->pid, i,
page_addr);
unmap_kernel_range((unsigned long)page_addr,
@@ -3007,9 +2991,7 @@
put_task_struct(proc->tsk);
binder_debug(BINDER_DEBUG_OPEN_CLOSE,
- "binder_release: %d threads %d, nodes %d (ref %d), "
- "refs %d, active transactions %d, buffers %d, "
- "pages %d\n",
+ "binder_release: %d threads %d, nodes %d (ref %d), refs %d, active transactions %d, buffers %d, pages %d\n",
proc->pid, threads, nodes, incoming_refs, outgoing_refs,
active_transactions, buffers, page_count);
@@ -3023,7 +3005,7 @@
int defer;
do {
- mutex_lock(&binder_lock);
+ binder_lock(__func__);
mutex_lock(&binder_deferred_lock);
if (!hlist_empty(&binder_deferred_list)) {
proc = hlist_entry(binder_deferred_list.first,
@@ -3050,7 +3032,7 @@
if (defer & BINDER_DEFERRED_RELEASE)
binder_deferred_release(proc); /* frees proc */
- mutex_unlock(&binder_lock);
+ binder_unlock(__func__);
if (files)
put_files_struct(files);
} while (proc);
@@ -3391,7 +3373,7 @@
int do_lock = !binder_debug_no_lock;
if (do_lock)
- mutex_lock(&binder_lock);
+ binder_lock(__func__);
seq_puts(m, "binder state:\n");
@@ -3403,7 +3385,7 @@
hlist_for_each_entry(proc, pos, &binder_procs, proc_node)
print_binder_proc(m, proc, 1);
if (do_lock)
- mutex_unlock(&binder_lock);
+ binder_unlock(__func__);
return 0;
}
@@ -3414,7 +3396,7 @@
int do_lock = !binder_debug_no_lock;
if (do_lock)
- mutex_lock(&binder_lock);
+ binder_lock(__func__);
seq_puts(m, "binder stats:\n");
@@ -3423,7 +3405,7 @@
hlist_for_each_entry(proc, pos, &binder_procs, proc_node)
print_binder_proc_stats(m, proc);
if (do_lock)
- mutex_unlock(&binder_lock);
+ binder_unlock(__func__);
return 0;
}
@@ -3434,13 +3416,13 @@
int do_lock = !binder_debug_no_lock;
if (do_lock)
- mutex_lock(&binder_lock);
+ binder_lock(__func__);
seq_puts(m, "binder transactions:\n");
hlist_for_each_entry(proc, pos, &binder_procs, proc_node)
print_binder_proc(m, proc, 0);
if (do_lock)
- mutex_unlock(&binder_lock);
+ binder_unlock(__func__);
return 0;
}
@@ -3450,11 +3432,11 @@
int do_lock = !binder_debug_no_lock;
if (do_lock)
- mutex_lock(&binder_lock);
+ binder_lock(__func__);
seq_puts(m, "binder proc state:\n");
print_binder_proc(m, proc, 1);
if (do_lock)
- mutex_unlock(&binder_lock);
+ binder_unlock(__func__);
return 0;
}
@@ -3549,4 +3531,7 @@
device_initcall(binder_init);
+#define CREATE_TRACE_POINTS
+#include "binder_trace.h"
+
MODULE_LICENSE("GPL v2");
diff --git a/drivers/staging/android/binder_trace.h b/drivers/staging/android/binder_trace.h
new file mode 100644
index 0000000..82a567c
--- /dev/null
+++ b/drivers/staging/android/binder_trace.h
@@ -0,0 +1,327 @@
+/*
+ * Copyright (C) 2012 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM binder
+
+#if !defined(_BINDER_TRACE_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _BINDER_TRACE_H
+
+#include <linux/tracepoint.h>
+
+struct binder_buffer;
+struct binder_node;
+struct binder_proc;
+struct binder_ref;
+struct binder_thread;
+struct binder_transaction;
+
+TRACE_EVENT(binder_ioctl,
+ TP_PROTO(unsigned int cmd, unsigned long arg),
+ TP_ARGS(cmd, arg),
+
+ TP_STRUCT__entry(
+ __field(unsigned int, cmd)
+ __field(unsigned long, arg)
+ ),
+ TP_fast_assign(
+ __entry->cmd = cmd;
+ __entry->arg = arg;
+ ),
+ TP_printk("cmd=0x%x arg=0x%lx", __entry->cmd, __entry->arg)
+);
+
+DECLARE_EVENT_CLASS(binder_lock_class,
+ TP_PROTO(const char *tag),
+ TP_ARGS(tag),
+ TP_STRUCT__entry(
+ __field(const char *, tag)
+ ),
+ TP_fast_assign(
+ __entry->tag = tag;
+ ),
+ TP_printk("tag=%s", __entry->tag)
+);
+
+#define DEFINE_BINDER_LOCK_EVENT(name) \
+DEFINE_EVENT(binder_lock_class, name, \
+ TP_PROTO(const char *func), \
+ TP_ARGS(func))
+
+DEFINE_BINDER_LOCK_EVENT(binder_lock);
+DEFINE_BINDER_LOCK_EVENT(binder_locked);
+DEFINE_BINDER_LOCK_EVENT(binder_unlock);
+
+DECLARE_EVENT_CLASS(binder_function_return_class,
+ TP_PROTO(int ret),
+ TP_ARGS(ret),
+ TP_STRUCT__entry(
+ __field(int, ret)
+ ),
+ TP_fast_assign(
+ __entry->ret = ret;
+ ),
+ TP_printk("ret=%d", __entry->ret)
+);
+
+#define DEFINE_BINDER_FUNCTION_RETURN_EVENT(name) \
+DEFINE_EVENT(binder_function_return_class, name, \
+ TP_PROTO(int ret), \
+ TP_ARGS(ret))
+
+DEFINE_BINDER_FUNCTION_RETURN_EVENT(binder_ioctl_done);
+DEFINE_BINDER_FUNCTION_RETURN_EVENT(binder_write_done);
+DEFINE_BINDER_FUNCTION_RETURN_EVENT(binder_read_done);
+
+TRACE_EVENT(binder_wait_for_work,
+ TP_PROTO(bool proc_work, bool transaction_stack, bool thread_todo),
+ TP_ARGS(proc_work, transaction_stack, thread_todo),
+
+ TP_STRUCT__entry(
+ __field(bool, proc_work)
+ __field(bool, transaction_stack)
+ __field(bool, thread_todo)
+ ),
+ TP_fast_assign(
+ __entry->proc_work = proc_work;
+ __entry->transaction_stack = transaction_stack;
+ __entry->thread_todo = thread_todo;
+ ),
+ TP_printk("proc_work=%d transaction_stack=%d thread_todo=%d",
+ __entry->proc_work, __entry->transaction_stack,
+ __entry->thread_todo)
+);
+
+TRACE_EVENT(binder_transaction,
+ TP_PROTO(bool reply, struct binder_transaction *t,
+ struct binder_node *target_node),
+ TP_ARGS(reply, t, target_node),
+ TP_STRUCT__entry(
+ __field(int, debug_id)
+ __field(int, target_node)
+ __field(int, to_proc)
+ __field(int, to_thread)
+ __field(int, reply)
+ __field(unsigned int, code)
+ __field(unsigned int, flags)
+ ),
+ TP_fast_assign(
+ __entry->debug_id = t->debug_id;
+ __entry->target_node = target_node ? target_node->debug_id : 0;
+ __entry->to_proc = t->to_proc->pid;
+ __entry->to_thread = t->to_thread ? t->to_thread->pid : 0;
+ __entry->reply = reply;
+ __entry->code = t->code;
+ __entry->flags = t->flags;
+ ),
+ TP_printk("transaction=%d dest_node=%d dest_proc=%d dest_thread=%d reply=%d flags=0x%x code=0x%x",
+ __entry->debug_id, __entry->target_node,
+ __entry->to_proc, __entry->to_thread,
+ __entry->reply, __entry->flags, __entry->code)
+);
+
+TRACE_EVENT(binder_transaction_received,
+ TP_PROTO(struct binder_transaction *t),
+ TP_ARGS(t),
+
+ TP_STRUCT__entry(
+ __field(int, debug_id)
+ ),
+ TP_fast_assign(
+ __entry->debug_id = t->debug_id;
+ ),
+ TP_printk("transaction=%d", __entry->debug_id)
+);
+
+TRACE_EVENT(binder_transaction_node_to_ref,
+ TP_PROTO(struct binder_transaction *t, struct binder_node *node,
+ struct binder_ref *ref),
+ TP_ARGS(t, node, ref),
+
+ TP_STRUCT__entry(
+ __field(int, debug_id)
+ __field(int, node_debug_id)
+ __field(void __user *, node_ptr)
+ __field(int, ref_debug_id)
+ __field(uint32_t, ref_desc)
+ ),
+ TP_fast_assign(
+ __entry->debug_id = t->debug_id;
+ __entry->node_debug_id = node->debug_id;
+ __entry->node_ptr = node->ptr;
+ __entry->ref_debug_id = ref->debug_id;
+ __entry->ref_desc = ref->desc;
+ ),
+ TP_printk("transaction=%d node=%d src_ptr=0x%p ==> dest_ref=%d dest_desc=%d",
+ __entry->debug_id, __entry->node_debug_id, __entry->node_ptr,
+ __entry->ref_debug_id, __entry->ref_desc)
+);
+
+TRACE_EVENT(binder_transaction_ref_to_node,
+ TP_PROTO(struct binder_transaction *t, struct binder_ref *ref),
+ TP_ARGS(t, ref),
+
+ TP_STRUCT__entry(
+ __field(int, debug_id)
+ __field(int, ref_debug_id)
+ __field(uint32_t, ref_desc)
+ __field(int, node_debug_id)
+ __field(void __user *, node_ptr)
+ ),
+ TP_fast_assign(
+ __entry->debug_id = t->debug_id;
+ __entry->ref_debug_id = ref->debug_id;
+ __entry->ref_desc = ref->desc;
+ __entry->node_debug_id = ref->node->debug_id;
+ __entry->node_ptr = ref->node->ptr;
+ ),
+ TP_printk("transaction=%d node=%d src_ref=%d src_desc=%d ==> dest_ptr=0x%p",
+ __entry->debug_id, __entry->node_debug_id,
+ __entry->ref_debug_id, __entry->ref_desc, __entry->node_ptr)
+);
+
+TRACE_EVENT(binder_transaction_ref_to_ref,
+ TP_PROTO(struct binder_transaction *t, struct binder_ref *src_ref,
+ struct binder_ref *dest_ref),
+ TP_ARGS(t, src_ref, dest_ref),
+
+ TP_STRUCT__entry(
+ __field(int, debug_id)
+ __field(int, node_debug_id)
+ __field(int, src_ref_debug_id)
+ __field(uint32_t, src_ref_desc)
+ __field(int, dest_ref_debug_id)
+ __field(uint32_t, dest_ref_desc)
+ ),
+ TP_fast_assign(
+ __entry->debug_id = t->debug_id;
+ __entry->node_debug_id = src_ref->node->debug_id;
+ __entry->src_ref_debug_id = src_ref->debug_id;
+ __entry->src_ref_desc = src_ref->desc;
+ __entry->dest_ref_debug_id = dest_ref->debug_id;
+ __entry->dest_ref_desc = dest_ref->desc;
+ ),
+ TP_printk("transaction=%d node=%d src_ref=%d src_desc=%d ==> dest_ref=%d dest_desc=%d",
+ __entry->debug_id, __entry->node_debug_id,
+ __entry->src_ref_debug_id, __entry->src_ref_desc,
+ __entry->dest_ref_debug_id, __entry->dest_ref_desc)
+);
+
+TRACE_EVENT(binder_transaction_fd,
+ TP_PROTO(struct binder_transaction *t, int src_fd, int dest_fd),
+ TP_ARGS(t, src_fd, dest_fd),
+
+ TP_STRUCT__entry(
+ __field(int, debug_id)
+ __field(int, src_fd)
+ __field(int, dest_fd)
+ ),
+ TP_fast_assign(
+ __entry->debug_id = t->debug_id;
+ __entry->src_fd = src_fd;
+ __entry->dest_fd = dest_fd;
+ ),
+ TP_printk("transaction=%d src_fd=%d ==> dest_fd=%d",
+ __entry->debug_id, __entry->src_fd, __entry->dest_fd)
+);
+
+DECLARE_EVENT_CLASS(binder_buffer_class,
+ TP_PROTO(struct binder_buffer *buf),
+ TP_ARGS(buf),
+ TP_STRUCT__entry(
+ __field(int, debug_id)
+ __field(size_t, data_size)
+ __field(size_t, offsets_size)
+ ),
+ TP_fast_assign(
+ __entry->debug_id = buf->debug_id;
+ __entry->data_size = buf->data_size;
+ __entry->offsets_size = buf->offsets_size;
+ ),
+ TP_printk("transaction=%d data_size=%zd offsets_size=%zd",
+ __entry->debug_id, __entry->data_size, __entry->offsets_size)
+);
+
+DEFINE_EVENT(binder_buffer_class, binder_transaction_alloc_buf,
+ TP_PROTO(struct binder_buffer *buffer),
+ TP_ARGS(buffer));
+
+DEFINE_EVENT(binder_buffer_class, binder_transaction_buffer_release,
+ TP_PROTO(struct binder_buffer *buffer),
+ TP_ARGS(buffer));
+
+DEFINE_EVENT(binder_buffer_class, binder_transaction_failed_buffer_release,
+ TP_PROTO(struct binder_buffer *buffer),
+ TP_ARGS(buffer));
+
+TRACE_EVENT(binder_update_page_range,
+ TP_PROTO(struct binder_proc *proc, bool allocate,
+ void *start, void *end),
+ TP_ARGS(proc, allocate, start, end),
+ TP_STRUCT__entry(
+ __field(int, proc)
+ __field(bool, allocate)
+ __field(size_t, offset)
+ __field(size_t, size)
+ ),
+ TP_fast_assign(
+ __entry->proc = proc->pid;
+ __entry->allocate = allocate;
+ __entry->offset = start - proc->buffer;
+ __entry->size = end - start;
+ ),
+ TP_printk("proc=%d allocate=%d offset=%zu size=%zu",
+ __entry->proc, __entry->allocate,
+ __entry->offset, __entry->size)
+);
+
+TRACE_EVENT(binder_command,
+ TP_PROTO(uint32_t cmd),
+ TP_ARGS(cmd),
+ TP_STRUCT__entry(
+ __field(uint32_t, cmd)
+ ),
+ TP_fast_assign(
+ __entry->cmd = cmd;
+ ),
+ TP_printk("cmd=0x%x %s",
+ __entry->cmd,
+ _IOC_NR(__entry->cmd) < ARRAY_SIZE(binder_command_strings) ?
+ binder_command_strings[_IOC_NR(__entry->cmd)] :
+ "unknown")
+);
+
+TRACE_EVENT(binder_return,
+ TP_PROTO(uint32_t cmd),
+ TP_ARGS(cmd),
+ TP_STRUCT__entry(
+ __field(uint32_t, cmd)
+ ),
+ TP_fast_assign(
+ __entry->cmd = cmd;
+ ),
+ TP_printk("cmd=0x%x %s",
+ __entry->cmd,
+ _IOC_NR(__entry->cmd) < ARRAY_SIZE(binder_return_strings) ?
+ binder_return_strings[_IOC_NR(__entry->cmd)] :
+ "unknown")
+);
+
+#endif /* _BINDER_TRACE_H */
+
+#undef TRACE_INCLUDE_PATH
+#undef TRACE_INCLUDE_FILE
+#define TRACE_INCLUDE_PATH .
+#define TRACE_INCLUDE_FILE binder_trace
+#include <trace/define_trace.h>
diff --git a/drivers/staging/android/logger.c b/drivers/staging/android/logger.c
index 1d5ed47..dbc63cb 100644
--- a/drivers/staging/android/logger.c
+++ b/drivers/staging/android/logger.c
@@ -676,4 +676,25 @@
out:
return ret;
}
+
+static void __exit logger_exit(void)
+{
+ struct logger_log *current_log, *next_log;
+
+ list_for_each_entry_safe(current_log, next_log, &log_list, logs) {
+ /* we have to delete all the entry inside log_list */
+ misc_deregister(¤t_log->misc);
+ vfree(current_log->buffer);
+ kfree(current_log->misc.name);
+ list_del(¤t_log->logs);
+ kfree(current_log);
+ }
+}
+
+
device_initcall(logger_init);
+module_exit(logger_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Robert Love, <rlove@google.com>");
+MODULE_DESCRIPTION("Android Logger");
diff --git a/drivers/staging/bcm/Adapter.h b/drivers/staging/bcm/Adapter.h
index 4d490a9..f577948 100644
--- a/drivers/staging/bcm/Adapter.h
+++ b/drivers/staging/bcm/Adapter.h
@@ -151,7 +151,7 @@
UINT NumOfPacketsSent;
UCHAR ucDirection;
USHORT usCID;
- S_MIBS_EXTSERVICEFLOW_PARAMETERS stMibsExtServiceFlowTable;
+ struct bcm_mibs_parameters stMibsExtServiceFlowTable;
UINT uiCurrentRxRate;
UINT uiThisPeriodRxBytes;
UINT uiTotalRxBytes;
@@ -198,7 +198,7 @@
int AppCtrlQueueLen;
BOOLEAN MacTracingEnabled;
BOOLEAN bApplicationToExit;
- S_MIBS_DROPPED_APP_CNTRL_MESSAGES stDroppedAppCntrlMsgs;
+ struct bcm_mibs_dropped_cntrl_msg stDroppedAppCntrlMsgs;
ULONG RxCntrlMsgBitMask;
};
@@ -371,8 +371,8 @@
PFLASH2X_VENDORSPECIFIC_INFO psFlash2xVendorInfo;
UINT uiFlashBaseAdd; /* Flash start address */
UINT uiActiveISOOffset; /* Active ISO offset chosen before f/w download */
- FLASH2X_SECTION_VAL eActiveISO; /* Active ISO section val */
- FLASH2X_SECTION_VAL eActiveDSD; /* Active DSD val chosen before f/w download */
+ enum bcm_flash2x_section_val eActiveISO; /* Active ISO section val */
+ enum bcm_flash2x_section_val eActiveDSD; /* Active DSD val chosen before f/w download */
UINT uiActiveDSDOffsetAtFwDld; /* For accessing Active DSD chosen before f/w download */
UINT uiFlashLayoutMajorVersion;
UINT uiFlashLayoutMinorVersion;
diff --git a/drivers/staging/bcm/Bcmchar.c b/drivers/staging/bcm/Bcmchar.c
index 3d02c2e..efad33e 100644
--- a/drivers/staging/bcm/Bcmchar.c
+++ b/drivers/staging/bcm/Bcmchar.c
@@ -160,7 +160,7 @@
struct bcm_mini_adapter *Adapter = pTarang->Adapter;
INT Status = STATUS_FAILURE;
int timeout = 0;
- IOCTL_BUFFER IoBuffer;
+ struct bcm_ioctl_buffer IoBuffer;
int bytes;
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "Parameters Passed to control IOCTL cmd=0x%X arg=0x%lX", cmd, arg);
@@ -203,13 +203,13 @@
switch (cmd) {
/* Rdms for Swin Idle... */
case IOCTL_BCM_REGISTER_READ_PRIVATE: {
- RDM_BUFFER sRdmBuffer = {0};
+ struct bcm_rdm_buffer sRdmBuffer = {0};
PCHAR temp_buff;
UINT Bufflen;
u16 temp_value;
/* Copy Ioctl Buffer structure */
- if (copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER)))
+ if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer)))
return -EFAULT;
if (IoBuffer.InputLength > sizeof(sRdmBuffer))
@@ -248,11 +248,11 @@
}
case IOCTL_BCM_REGISTER_WRITE_PRIVATE: {
- WRM_BUFFER sWrmBuffer = {0};
+ struct bcm_wrm_buffer sWrmBuffer = {0};
UINT uiTempVar = 0;
/* Copy Ioctl Buffer structure */
- if (copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER)))
+ if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer)))
return -EFAULT;
if (IoBuffer.InputLength > sizeof(sWrmBuffer))
@@ -287,7 +287,7 @@
case IOCTL_BCM_REGISTER_READ:
case IOCTL_BCM_EEPROM_REGISTER_READ: {
- RDM_BUFFER sRdmBuffer = {0};
+ struct bcm_rdm_buffer sRdmBuffer = {0};
PCHAR temp_buff = NULL;
UINT uiTempVar = 0;
if ((Adapter->IdleMode == TRUE) ||
@@ -299,7 +299,7 @@
}
/* Copy Ioctl Buffer structure */
- if (copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER)))
+ if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer)))
return -EFAULT;
if (IoBuffer.InputLength > sizeof(sRdmBuffer))
@@ -345,8 +345,9 @@
}
case IOCTL_BCM_REGISTER_WRITE:
case IOCTL_BCM_EEPROM_REGISTER_WRITE: {
- WRM_BUFFER sWrmBuffer = {0};
+ struct bcm_wrm_buffer sWrmBuffer = {0};
UINT uiTempVar = 0;
+
if ((Adapter->IdleMode == TRUE) ||
(Adapter->bShutStatus == TRUE) ||
(Adapter->bPreparingForLowPowerMode == TRUE)) {
@@ -356,7 +357,7 @@
}
/* Copy Ioctl Buffer structure */
- if (copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER)))
+ if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer)))
return -EFAULT;
if (IoBuffer.InputLength > sizeof(sWrmBuffer))
@@ -401,8 +402,8 @@
UINT value = 0;
UINT uiBit = 0;
UINT uiOperation = 0;
+ struct bcm_gpio_info gpio_info = {0};
- GPIO_INFO gpio_info = {0};
if ((Adapter->IdleMode == TRUE) ||
(Adapter->bShutStatus == TRUE) ||
(Adapter->bPreparingForLowPowerMode == TRUE)) {
@@ -411,7 +412,7 @@
return -EACCES;
}
- if (copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER)))
+ if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer)))
return -EFAULT;
if (IoBuffer.InputLength > sizeof(gpio_info))
@@ -478,7 +479,7 @@
break;
case BCM_LED_THREAD_STATE_CHANGE_REQ: {
- USER_THREAD_REQ threadReq = {0};
+ struct bcm_user_thread_req threadReq = {0};
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "User made LED thread InActive");
if ((Adapter->IdleMode == TRUE) ||
@@ -490,7 +491,7 @@
break;
}
- if (copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER)))
+ if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer)))
return -EFAULT;
if (IoBuffer.InputLength > sizeof(threadReq))
@@ -518,14 +519,14 @@
case IOCTL_BCM_GPIO_STATUS_REQUEST: {
ULONG uiBit = 0;
UCHAR ucRead[4];
- GPIO_INFO gpio_info = {0};
+ struct bcm_gpio_info gpio_info = {0};
if ((Adapter->IdleMode == TRUE) ||
(Adapter->bShutStatus == TRUE) ||
(Adapter->bPreparingForLowPowerMode == TRUE))
return -EACCES;
- if (copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER)))
+ if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer)))
return -EFAULT;
if (IoBuffer.InputLength > sizeof(gpio_info))
@@ -552,17 +553,17 @@
case IOCTL_BCM_GPIO_MULTI_REQUEST: {
UCHAR ucResetValue[4];
- GPIO_MULTI_INFO gpio_multi_info[MAX_IDX];
- PGPIO_MULTI_INFO pgpio_multi_info = (PGPIO_MULTI_INFO)gpio_multi_info;
+ struct bcm_gpio_multi_info gpio_multi_info[MAX_IDX];
+ struct bcm_gpio_multi_info *pgpio_multi_info = (struct bcm_gpio_multi_info *)gpio_multi_info;
- memset(pgpio_multi_info, 0, MAX_IDX * sizeof(GPIO_MULTI_INFO));
+ memset(pgpio_multi_info, 0, MAX_IDX * sizeof(struct bcm_gpio_multi_info));
if ((Adapter->IdleMode == TRUE) ||
(Adapter->bShutStatus == TRUE) ||
(Adapter->bPreparingForLowPowerMode == TRUE))
return -EINVAL;
- if (copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER)))
+ if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer)))
return -EFAULT;
if (IoBuffer.InputLength > sizeof(gpio_multi_info))
@@ -636,15 +637,15 @@
case IOCTL_BCM_GPIO_MODE_REQUEST: {
UCHAR ucResetValue[4];
- GPIO_MULTI_MODE gpio_multi_mode[MAX_IDX];
- PGPIO_MULTI_MODE pgpio_multi_mode = (PGPIO_MULTI_MODE)gpio_multi_mode;
+ struct bcm_gpio_multi_mode gpio_multi_mode[MAX_IDX];
+ struct bcm_gpio_multi_mode *pgpio_multi_mode = (struct bcm_gpio_multi_mode *)gpio_multi_mode;
if ((Adapter->IdleMode == TRUE) ||
(Adapter->bShutStatus == TRUE) ||
(Adapter->bPreparingForLowPowerMode == TRUE))
return -EINVAL;
- if (copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER)))
+ if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer)))
return -EFAULT;
if (IoBuffer.InputLength > sizeof(gpio_multi_mode))
@@ -719,7 +720,7 @@
PVOID pvBuffer = NULL;
/* Copy Ioctl Buffer structure */
- if (copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER)))
+ if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer)))
return -EFAULT;
if (IoBuffer.InputLength < sizeof(struct bcm_link_request))
@@ -799,7 +800,7 @@
}
/* Copy Ioctl Buffer structure */
- if (copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER))) {
+ if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer))) {
up(&Adapter->fw_download_sema);
return -EFAULT;
}
@@ -895,7 +896,7 @@
mdelay(10);
/* Wait for MailBox Interrupt */
- if (StartInterruptUrb((PS_INTERFACE_ADAPTER)Adapter->pvInterfaceAdapter))
+ if (StartInterruptUrb((struct bcm_interface_adapter *)Adapter->pvInterfaceAdapter))
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Unable to send interrupt...\n");
timeout = 5*HZ;
@@ -1000,7 +1001,7 @@
ulong len;
/* Copy Ioctl Buffer structure */
- if (copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER)))
+ if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer)))
return -EFAULT;
len = min_t(ulong, IoBuffer.OutputLength, strlen(VER_FILEVERSION_STR) + 1);
@@ -1015,7 +1016,7 @@
LINK_STATE link_state;
/* Copy Ioctl Buffer structure */
- if (copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER))) {
+ if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer))) {
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "copy_from_user failed..\n");
return -EFAULT;
}
@@ -1042,7 +1043,7 @@
UINT tracing_flag;
/* copy ioctl Buffer structure */
- if (copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER)))
+ if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer)))
return -EFAULT;
if (copy_from_user(&tracing_flag, IoBuffer.InputBuffer, sizeof(UINT)))
@@ -1057,13 +1058,13 @@
case IOCTL_BCM_GET_DSX_INDICATION: {
ULONG ulSFId = 0;
- if (copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER)))
+ if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer)))
return -EFAULT;
- if (IoBuffer.OutputLength < sizeof(stLocalSFAddIndicationAlt)) {
+ if (IoBuffer.OutputLength < sizeof(struct bcm_add_indication_alt)) {
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0,
"Mismatch req: %lx needed is =0x%zx!!!",
- IoBuffer.OutputLength, sizeof(stLocalSFAddIndicationAlt));
+ IoBuffer.OutputLength, sizeof(struct bcm_add_indication_alt));
return -EINVAL;
}
@@ -1079,18 +1080,18 @@
case IOCTL_BCM_GET_HOST_MIBS: {
PVOID temp_buff;
- if (copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER)))
+ if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer)))
return -EFAULT;
- if (IoBuffer.OutputLength != sizeof(S_MIBS_HOST_STATS_MIBS)) {
+ if (IoBuffer.OutputLength != sizeof(struct bcm_host_stats_mibs)) {
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0,
"Length Check failed %lu %zd\n",
- IoBuffer.OutputLength, sizeof(S_MIBS_HOST_STATS_MIBS));
+ IoBuffer.OutputLength, sizeof(struct bcm_host_stats_mibs));
return -EINVAL;
}
/* FIXME: HOST_STATS are too big for kmalloc (122048)! */
- temp_buff = kzalloc(sizeof(S_MIBS_HOST_STATS_MIBS), GFP_KERNEL);
+ temp_buff = kzalloc(sizeof(struct bcm_host_stats_mibs), GFP_KERNEL);
if (!temp_buff)
return STATUS_FAILURE;
@@ -1098,7 +1099,7 @@
GetDroppedAppCntrlPktMibs(temp_buff, pTarang);
if (Status != STATUS_FAILURE)
- if (copy_to_user(IoBuffer.OutputBuffer, temp_buff, sizeof(S_MIBS_HOST_STATS_MIBS))) {
+ if (copy_to_user(IoBuffer.OutputBuffer, temp_buff, sizeof(struct bcm_host_stats_mibs))) {
kfree(temp_buff);
return -EFAULT;
}
@@ -1118,7 +1119,7 @@
break;
case IOCTL_BCM_BULK_WRM: {
- PBULKWRM_BUFFER pBulkBuffer;
+ struct bcm_bulk_wrm_buffer *pBulkBuffer;
UINT uiTempVar = 0;
PCHAR pvBuffer = NULL;
@@ -1132,7 +1133,7 @@
}
/* Copy Ioctl Buffer structure */
- if (copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER)))
+ if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer)))
return -EFAULT;
if (IoBuffer.InputLength < sizeof(ULONG) * 2)
@@ -1143,7 +1144,7 @@
if (IS_ERR(pvBuffer))
return PTR_ERR(pvBuffer);
- pBulkBuffer = (PBULKWRM_BUFFER)pvBuffer;
+ pBulkBuffer = (struct bcm_bulk_wrm_buffer *)pvBuffer;
if (((ULONG)pBulkBuffer->Register & 0x0F000000) != 0x0F000000 ||
((ULONG)pBulkBuffer->Register & 0x3)) {
@@ -1180,7 +1181,7 @@
}
case IOCTL_BCM_GET_NVM_SIZE:
- if (copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER)))
+ if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer)))
return -EFAULT;
if (Adapter->eNVMType == NVM_EEPROM || Adapter->eNVMType == NVM_FLASH) {
@@ -1194,7 +1195,7 @@
case IOCTL_BCM_CAL_INIT: {
UINT uiSectorSize = 0 ;
if (Adapter->eNVMType == NVM_FLASH) {
- if (copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER)))
+ if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer)))
return -EFAULT;
if (copy_from_user(&uiSectorSize, IoBuffer.InputBuffer, sizeof(UINT)))
@@ -1231,7 +1232,7 @@
USER_BCM_DBG_STATE sUserDebugState;
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "In SET_DEBUG ioctl\n");
- if (copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER)))
+ if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer)))
return -EFAULT;
if (copy_from_user(&sUserDebugState, IoBuffer.InputBuffer, sizeof(USER_BCM_DBG_STATE)))
@@ -1262,7 +1263,7 @@
case IOCTL_BCM_NVM_READ:
case IOCTL_BCM_NVM_WRITE: {
- NVM_READWRITE stNVMReadWrite;
+ struct bcm_nvm_readwrite stNVMReadWrite;
PUCHAR pReadData = NULL;
ULONG ulDSDMagicNumInUsrBuff = 0;
struct timeval tv0, tv1;
@@ -1284,12 +1285,12 @@
}
/* Copy Ioctl Buffer structure */
- if (copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER)))
+ if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer)))
return -EFAULT;
if (copy_from_user(&stNVMReadWrite,
(IOCTL_BCM_NVM_READ == cmd) ? IoBuffer.OutputBuffer : IoBuffer.InputBuffer,
- sizeof(NVM_READWRITE)))
+ sizeof(struct bcm_nvm_readwrite)))
return -EFAULT;
/*
@@ -1404,7 +1405,7 @@
}
case IOCTL_BCM_FLASH2X_SECTION_READ: {
- FLASH2X_READWRITE sFlash2xRead = {0};
+ struct bcm_flash2x_readwrite sFlash2xRead = {0};
PUCHAR pReadBuff = NULL ;
UINT NOB = 0;
UINT BuffSize = 0;
@@ -1418,11 +1419,11 @@
}
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "IOCTL_BCM_FLASH2X_SECTION_READ Called");
- if (copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER)))
+ if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer)))
return -EFAULT;
/* Reading FLASH 2.x READ structure */
- if (copy_from_user(&sFlash2xRead, IoBuffer.InputBuffer, sizeof(FLASH2X_READWRITE)))
+ if (copy_from_user(&sFlash2xRead, IoBuffer.InputBuffer, sizeof(struct bcm_flash2x_readwrite)))
return -EFAULT;
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "\nsFlash2xRead.Section :%x", sFlash2xRead.Section);
@@ -1495,7 +1496,7 @@
break;
case IOCTL_BCM_FLASH2X_SECTION_WRITE: {
- FLASH2X_READWRITE sFlash2xWrite = {0};
+ struct bcm_flash2x_readwrite sFlash2xWrite = {0};
PUCHAR pWriteBuff;
void __user *InputAddr;
UINT NOB = 0;
@@ -1513,11 +1514,11 @@
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "IOCTL_BCM_FLASH2X_SECTION_WRITE Called");
- if (copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER)))
+ if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer)))
return -EFAULT;
/* Reading FLASH 2.x READ structure */
- if (copy_from_user(&sFlash2xWrite, IoBuffer.InputBuffer, sizeof(FLASH2X_READWRITE)))
+ if (copy_from_user(&sFlash2xWrite, IoBuffer.InputBuffer, sizeof(struct bcm_flash2x_readwrite)))
return -EFAULT;
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "\nsFlash2xRead.Section :%x", sFlash2xWrite.Section);
@@ -1604,16 +1605,16 @@
break;
case IOCTL_BCM_GET_FLASH2X_SECTION_BITMAP: {
- PFLASH2X_BITMAP psFlash2xBitMap;
+ struct bcm_flash2x_bitmap *psFlash2xBitMap;
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "IOCTL_BCM_GET_FLASH2X_SECTION_BITMAP Called");
- if (copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER)))
+ if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer)))
return -EFAULT;
- if (IoBuffer.OutputLength != sizeof(FLASH2X_BITMAP))
+ if (IoBuffer.OutputLength != sizeof(struct bcm_flash2x_bitmap))
return -EINVAL;
- psFlash2xBitMap = kzalloc(sizeof(FLASH2X_BITMAP), GFP_KERNEL);
+ psFlash2xBitMap = kzalloc(sizeof(struct bcm_flash2x_bitmap), GFP_KERNEL);
if (psFlash2xBitMap == NULL) {
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Memory is not available");
return -ENOMEM;
@@ -1634,7 +1635,7 @@
BcmGetFlash2xSectionalBitMap(Adapter, psFlash2xBitMap);
up(&Adapter->NVMRdmWrmLock);
- if (copy_to_user(IoBuffer.OutputBuffer, psFlash2xBitMap, sizeof(FLASH2X_BITMAP))) {
+ if (copy_to_user(IoBuffer.OutputBuffer, psFlash2xBitMap, sizeof(struct bcm_flash2x_bitmap))) {
kfree(psFlash2xBitMap);
return -EFAULT;
}
@@ -1644,7 +1645,7 @@
break;
case IOCTL_BCM_SET_ACTIVE_SECTION: {
- FLASH2X_SECTION_VAL eFlash2xSectionVal = 0;
+ enum bcm_flash2x_section_val eFlash2xSectionVal = 0;
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "IOCTL_BCM_SET_ACTIVE_SECTION Called");
if (IsFlash2x(Adapter) != TRUE) {
@@ -1652,7 +1653,7 @@
return -EINVAL;
}
- Status = copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER));
+ Status = copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer));
if (Status) {
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Copy of IOCTL BUFFER failed");
return -EFAULT;
@@ -1692,7 +1693,7 @@
break;
case IOCTL_BCM_COPY_SECTION: {
- FLASH2X_COPY_SECTION sCopySectStrut = {0};
+ struct bcm_flash2x_copy_section sCopySectStrut = {0};
Status = STATUS_SUCCESS;
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "IOCTL_BCM_COPY_SECTION Called");
@@ -1702,13 +1703,13 @@
return -EINVAL;
}
- Status = copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER));
+ Status = copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer));
if (Status) {
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Copy of IOCTL BUFFER failed Status :%d", Status);
return -EFAULT;
}
- Status = copy_from_user(&sCopySectStrut, IoBuffer.InputBuffer, sizeof(FLASH2X_COPY_SECTION));
+ Status = copy_from_user(&sCopySectStrut, IoBuffer.InputBuffer, sizeof(struct bcm_flash2x_copy_section));
if (Status) {
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Copy of Copy_Section_Struct failed with Status :%d", Status);
return -EFAULT;
@@ -1769,7 +1770,7 @@
Status = STATUS_SUCCESS;
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, " IOCTL_BCM_GET_FLASH_CS_INFO Called");
- Status = copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER));
+ Status = copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer));
if (Status) {
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Copy of IOCTL BUFFER failed");
return -EFAULT;
@@ -1799,7 +1800,7 @@
case IOCTL_BCM_SELECT_DSD: {
UINT SectOfset = 0;
- FLASH2X_SECTION_VAL eFlash2xSectionVal;
+ enum bcm_flash2x_section_val eFlash2xSectionVal;
eFlash2xSectionVal = NO_SECTION_VAL;
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "IOCTL_BCM_SELECT_DSD Called");
@@ -1808,7 +1809,7 @@
return -EINVAL;
}
- Status = copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER));
+ Status = copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer));
if (Status) {
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Copy of IOCTL BUFFER failed");
return -EFAULT;
@@ -1842,7 +1843,7 @@
break;
case IOCTL_BCM_NVM_RAW_READ: {
- NVM_READWRITE stNVMRead;
+ struct bcm_nvm_readwrite stNVMRead;
INT NOB ;
INT BuffSize ;
INT ReadOffset = 0;
@@ -1856,12 +1857,12 @@
}
/* Copy Ioctl Buffer structure */
- if (copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER))) {
+ if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer))) {
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "copy_from_user 1 failed\n");
return -EFAULT;
}
- if (copy_from_user(&stNVMRead, IoBuffer.OutputBuffer, sizeof(NVM_READWRITE)))
+ if (copy_from_user(&stNVMRead, IoBuffer.OutputBuffer, sizeof(struct bcm_nvm_readwrite)))
return -EFAULT;
NOB = stNVMRead.uiNumBytes;
@@ -1933,7 +1934,7 @@
ULONG RxCntrlMsgBitMask = 0;
/* Copy Ioctl Buffer structure */
- Status = copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER));
+ Status = copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer));
if (Status) {
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "copy of Ioctl buffer is failed from user space");
return -EFAULT;
@@ -1955,7 +1956,7 @@
break;
case IOCTL_BCM_GET_DEVICE_DRIVER_INFO: {
- DEVICE_DRIVER_INFO DevInfo;
+ struct bcm_driver_info DevInfo;
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "Called IOCTL_BCM_GET_DEVICE_DRIVER_INFO\n");
@@ -1965,7 +1966,7 @@
DevInfo.u32NVMType = Adapter->eNVMType;
DevInfo.u32InterfaceType = BCM_USB;
- if (copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER)))
+ if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer)))
return -EFAULT;
if (IoBuffer.OutputLength < sizeof(DevInfo))
@@ -1977,19 +1978,19 @@
break;
case IOCTL_BCM_TIME_SINCE_NET_ENTRY: {
- ST_TIME_ELAPSED stTimeElapsedSinceNetEntry = {0};
+ struct bcm_time_elapsed stTimeElapsedSinceNetEntry = {0};
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "IOCTL_BCM_TIME_SINCE_NET_ENTRY called");
- if (copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER)))
+ if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer)))
return -EFAULT;
- if (IoBuffer.OutputLength < sizeof(ST_TIME_ELAPSED))
+ if (IoBuffer.OutputLength < sizeof(struct bcm_time_elapsed))
return -EINVAL;
stTimeElapsedSinceNetEntry.ul64TimeElapsedSinceNetEntry = get_seconds() - Adapter->liTimeSinceLastNetEntry;
- if (copy_to_user(IoBuffer.OutputBuffer, &stTimeElapsedSinceNetEntry, sizeof(ST_TIME_ELAPSED)))
+ if (copy_to_user(IoBuffer.OutputBuffer, &stTimeElapsedSinceNetEntry, sizeof(struct bcm_time_elapsed)))
return -EFAULT;
}
break;
diff --git a/drivers/staging/bcm/Bcmnet.c b/drivers/staging/bcm/Bcmnet.c
index 6e8c7f5..a3b91c7 100644
--- a/drivers/staging/bcm/Bcmnet.c
+++ b/drivers/staging/bcm/Bcmnet.c
@@ -142,7 +142,7 @@
struct ethtool_drvinfo *info)
{
struct bcm_mini_adapter *Adapter = GET_BCM_ADAPTER(dev);
- PS_INTERFACE_ADAPTER psIntfAdapter = Adapter->pvInterfaceAdapter;
+ struct bcm_interface_adapter *psIntfAdapter = Adapter->pvInterfaceAdapter;
struct usb_device *udev = interface_to_usbdev(psIntfAdapter->interface);
strcpy(info->driver, DRV_NAME);
@@ -186,7 +186,7 @@
int register_networkdev(struct bcm_mini_adapter *Adapter)
{
struct net_device *net = Adapter->dev;
- PS_INTERFACE_ADAPTER IntfAdapter = Adapter->pvInterfaceAdapter;
+ struct bcm_interface_adapter *IntfAdapter = Adapter->pvInterfaceAdapter;
struct usb_interface *udev = IntfAdapter->interface;
struct usb_device *xdev = IntfAdapter->udev;
@@ -227,7 +227,7 @@
void unregister_networkdev(struct bcm_mini_adapter *Adapter)
{
struct net_device *net = Adapter->dev;
- PS_INTERFACE_ADAPTER IntfAdapter = Adapter->pvInterfaceAdapter;
+ struct bcm_interface_adapter *IntfAdapter = Adapter->pvInterfaceAdapter;
struct usb_interface *udev = IntfAdapter->interface;
struct usb_device *xdev = IntfAdapter->udev;
diff --git a/drivers/staging/bcm/CmHost.c b/drivers/staging/bcm/CmHost.c
index 325b592..23ddc3d 100644
--- a/drivers/staging/bcm/CmHost.c
+++ b/drivers/staging/bcm/CmHost.c
@@ -107,7 +107,7 @@
DeleteAllClassifiersForSF(Adapter, uiSearchRuleIndex);
/* Resetting only MIBS related entries in the SF */
- memset((PVOID)&Adapter->PackInfo[uiSearchRuleIndex], 0, sizeof(S_MIBS_SERVICEFLOW_TABLE));
+ memset((PVOID)&Adapter->PackInfo[uiSearchRuleIndex], 0, sizeof(struct bcm_mibs_table));
}
static inline VOID
@@ -431,7 +431,7 @@
register struct bcm_connect_mgr_params *psfLocalSet, /* Pointer to the connection manager parameters structure */
register UINT uiSearchRuleIndex, /* <Index of Queue, to which this data belongs */
register UCHAR ucDsxType,
- stLocalSFAddIndicationAlt *pstAddIndication) {
+ struct bcm_add_indication_alt *pstAddIndication) {
/* UCHAR ucProtocolLength = 0; */
ULONG ulSFID;
@@ -833,11 +833,11 @@
{
int uiLoopIndex;
int nIndex;
- stLocalSFAddIndicationAlt *pstAddIndication;
+ struct bcm_add_indication_alt *pstAddIndication;
UINT nCurClassifierCnt;
struct bcm_mini_adapter *Adapter = GET_BCM_ADAPTER(gblpnetdev);
- pstAddIndication = (stLocalSFAddIndicationAlt *)pvBuffer;
+ pstAddIndication = (struct bcm_add_indication_alt *)pvBuffer;
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, DUMP_CONTROL, DBG_LVL_ALL, "======>");
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, DUMP_CONTROL, DBG_LVL_ALL, "u8Type: 0x%X", pstAddIndication->u8Type);
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, DUMP_CONTROL, DBG_LVL_ALL, "u8Direction: 0x%X", pstAddIndication->u8Direction);
@@ -1333,13 +1333,13 @@
ULONG StoreCmControlResponseMessage(struct bcm_mini_adapter *Adapter, PVOID pvBuffer, UINT *puBufferLength)
{
- stLocalSFAddIndicationAlt *pstAddIndicationAlt = NULL;
+ struct bcm_add_indication_alt *pstAddIndicationAlt = NULL;
struct bcm_add_indication *pstAddIndication = NULL;
struct bcm_del_request *pstDeletionRequest;
UINT uiSearchRuleIndex;
ULONG ulSFID;
- pstAddIndicationAlt = (stLocalSFAddIndicationAlt *)(pvBuffer);
+ pstAddIndicationAlt = (struct bcm_add_indication_alt *)(pvBuffer);
/*
* In case of DSD Req By MS, we should immediately delete this SF so that
@@ -1445,29 +1445,29 @@
return 1;
}
-static inline stLocalSFAddIndicationAlt
+static inline struct bcm_add_indication_alt
*RestoreCmControlResponseMessage(register struct bcm_mini_adapter *Adapter, register PVOID pvBuffer)
{
ULONG ulStatus = 0;
struct bcm_add_indication *pstAddIndication = NULL;
- stLocalSFAddIndicationAlt *pstAddIndicationDest = NULL;
+ struct bcm_add_indication_alt *pstAddIndicationDest = NULL;
pstAddIndication = (struct bcm_add_indication *)(pvBuffer);
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, CONN_MSG, DBG_LVL_ALL, "=====>");
if ((pstAddIndication->u8Type == DSD_REQ) ||
(pstAddIndication->u8Type == DSD_RSP) ||
(pstAddIndication->u8Type == DSD_ACK))
- return (stLocalSFAddIndicationAlt *)pvBuffer;
+ return (struct bcm_add_indication_alt *)pvBuffer;
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, CONN_MSG, DBG_LVL_ALL, "Inside RestoreCmControlResponseMessage ");
/*
* Need to Allocate memory to contain the SUPER Large structures
* Our driver can't create these structures on Stack :(
*/
- pstAddIndicationDest = kmalloc(sizeof(stLocalSFAddIndicationAlt), GFP_KERNEL);
+ pstAddIndicationDest = kmalloc(sizeof(struct bcm_add_indication_alt), GFP_KERNEL);
if (pstAddIndicationDest) {
- memset(pstAddIndicationDest, 0, sizeof(stLocalSFAddIndicationAlt));
+ memset(pstAddIndicationDest, 0, sizeof(struct bcm_add_indication_alt));
} else {
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, CONN_MSG, DBG_LVL_ALL, "Failed to allocate memory for SF Add Indication Structure ");
return NULL;
@@ -1573,36 +1573,36 @@
static ULONG GetNextTargetBufferLocation(struct bcm_mini_adapter *Adapter, B_UINT16 tid)
{
- ULONG ulTargetDSXBufferAddress;
- ULONG ulTargetDsxBufferIndexToUse, ulMaxTry;
+ ULONG dsx_buf;
+ ULONG idx, max_try;
if ((Adapter->ulTotalTargetBuffersAvailable == 0) || (Adapter->ulFreeTargetBufferCnt == 0)) {
ClearTargetDSXBuffer(Adapter, tid, FALSE);
return 0;
}
- ulTargetDsxBufferIndexToUse = Adapter->ulCurrentTargetBuffer;
- ulMaxTry = Adapter->ulTotalTargetBuffersAvailable;
- while ((ulMaxTry) && (Adapter->astTargetDsxBuffer[ulTargetDsxBufferIndexToUse].valid != 1)) {
- ulTargetDsxBufferIndexToUse = (ulTargetDsxBufferIndexToUse+1) % Adapter->ulTotalTargetBuffersAvailable;
- ulMaxTry--;
+ idx = Adapter->ulCurrentTargetBuffer;
+ max_try = Adapter->ulTotalTargetBuffersAvailable;
+ while ((max_try) && (Adapter->astTargetDsxBuffer[idx].valid != 1)) {
+ idx = (idx+1) % Adapter->ulTotalTargetBuffersAvailable;
+ max_try--;
}
- if (ulMaxTry == 0) {
+ if (max_try == 0) {
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "\n GetNextTargetBufferLocation : Error No Free Target DSX Buffers FreeCnt : %lx ", Adapter->ulFreeTargetBufferCnt);
ClearTargetDSXBuffer(Adapter, tid, FALSE);
return 0;
}
- ulTargetDSXBufferAddress = Adapter->astTargetDsxBuffer[ulTargetDsxBufferIndexToUse].ulTargetDsxBuffer;
- Adapter->astTargetDsxBuffer[ulTargetDsxBufferIndexToUse].valid = 0;
- Adapter->astTargetDsxBuffer[ulTargetDsxBufferIndexToUse].tid = tid;
+ dsx_buf = Adapter->astTargetDsxBuffer[idx].ulTargetDsxBuffer;
+ Adapter->astTargetDsxBuffer[idx].valid = 0;
+ Adapter->astTargetDsxBuffer[idx].tid = tid;
Adapter->ulFreeTargetBufferCnt--;
- ulTargetDsxBufferIndexToUse = (ulTargetDsxBufferIndexToUse+1)%Adapter->ulTotalTargetBuffersAvailable;
- Adapter->ulCurrentTargetBuffer = ulTargetDsxBufferIndexToUse;
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "GetNextTargetBufferLocation :Returning address %lx tid %d\n", ulTargetDSXBufferAddress, tid);
+ idx = (idx+1)%Adapter->ulTotalTargetBuffersAvailable;
+ Adapter->ulCurrentTargetBuffer = idx;
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "GetNextTargetBufferLocation :Returning address %lx tid %d\n", dsx_buf, tid);
- return ulTargetDSXBufferAddress;
+ return dsx_buf;
}
int AllocAdapterDsxBuffer(struct bcm_mini_adapter *Adapter)
@@ -1611,7 +1611,7 @@
* Need to Allocate memory to contain the SUPER Large structures
* Our driver can't create these structures on Stack
*/
- Adapter->caDsxReqResp = kmalloc(sizeof(stLocalSFAddIndicationAlt)+LEADER_SIZE, GFP_KERNEL);
+ Adapter->caDsxReqResp = kmalloc(sizeof(struct bcm_add_indication_alt)+LEADER_SIZE, GFP_KERNEL);
if (!Adapter->caDsxReqResp)
return -ENOMEM;
@@ -1634,8 +1634,8 @@
PVOID pvBuffer /* Starting Address of the Buffer, that contains the AddIndication Data */)
{
struct bcm_connect_mgr_params *psfLocalSet = NULL;
- stLocalSFAddIndicationAlt *pstAddIndication = NULL;
- stLocalSFChangeIndicationAlt *pstChangeIndication = NULL;
+ struct bcm_add_indication_alt *pstAddIndication = NULL;
+ struct bcm_change_indication *pstChangeIndication = NULL;
struct bcm_leader *pLeader = NULL;
/*
@@ -1661,12 +1661,12 @@
switch (pstAddIndication->u8Type) {
case DSA_REQ:
{
- pLeader->PLength = sizeof(stLocalSFAddIndicationAlt);
+ pLeader->PLength = sizeof(struct bcm_add_indication_alt);
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, CONN_MSG, DBG_LVL_ALL, "Sending DSA Response....\n");
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, CONN_MSG, DBG_LVL_ALL, "SENDING DSA RESPONSE TO MAC %d", pLeader->PLength);
- *((stLocalSFAddIndicationAlt *)&(Adapter->caDsxReqResp[LEADER_SIZE]))
+ *((struct bcm_add_indication_alt *)&(Adapter->caDsxReqResp[LEADER_SIZE]))
= *pstAddIndication;
- ((stLocalSFAddIndicationAlt *)&(Adapter->caDsxReqResp[LEADER_SIZE]))->u8Type = DSA_RSP;
+ ((struct bcm_add_indication_alt *)&(Adapter->caDsxReqResp[LEADER_SIZE]))->u8Type = DSA_RSP;
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, CONN_MSG, DBG_LVL_ALL, " VCID = %x", ntohs(pstAddIndication->u16VCID));
CopyBufferToControlPacket(Adapter, (PVOID)Adapter->caDsxReqResp);
@@ -1675,12 +1675,12 @@
break;
case DSA_RSP:
{
- pLeader->PLength = sizeof(stLocalSFAddIndicationAlt);
+ pLeader->PLength = sizeof(struct bcm_add_indication_alt);
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, CONN_MSG, DBG_LVL_ALL, "SENDING DSA ACK TO MAC %d",
pLeader->PLength);
- *((stLocalSFAddIndicationAlt *)&(Adapter->caDsxReqResp[LEADER_SIZE]))
+ *((struct bcm_add_indication_alt *)&(Adapter->caDsxReqResp[LEADER_SIZE]))
= *pstAddIndication;
- ((stLocalSFAddIndicationAlt *)&(Adapter->caDsxReqResp[LEADER_SIZE]))->u8Type = DSA_ACK;
+ ((struct bcm_add_indication_alt *)&(Adapter->caDsxReqResp[LEADER_SIZE]))->u8Type = DSA_ACK;
} /* no break here..we should go down. */
case DSA_ACK:
@@ -1773,12 +1773,12 @@
break;
case DSC_REQ:
{
- pLeader->PLength = sizeof(stLocalSFChangeIndicationAlt);
- pstChangeIndication = (stLocalSFChangeIndicationAlt *)pstAddIndication;
+ pLeader->PLength = sizeof(struct bcm_change_indication);
+ pstChangeIndication = (struct bcm_change_indication *)pstAddIndication;
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, CONN_MSG, DBG_LVL_ALL, "SENDING DSC RESPONSE TO MAC %d", pLeader->PLength);
- *((stLocalSFChangeIndicationAlt *)&(Adapter->caDsxReqResp[LEADER_SIZE])) = *pstChangeIndication;
- ((stLocalSFChangeIndicationAlt *)&(Adapter->caDsxReqResp[LEADER_SIZE]))->u8Type = DSC_RSP;
+ *((struct bcm_change_indication *)&(Adapter->caDsxReqResp[LEADER_SIZE])) = *pstChangeIndication;
+ ((struct bcm_change_indication *)&(Adapter->caDsxReqResp[LEADER_SIZE]))->u8Type = DSC_RSP;
CopyBufferToControlPacket(Adapter, (PVOID)Adapter->caDsxReqResp);
kfree(pstAddIndication);
@@ -1786,17 +1786,17 @@
break;
case DSC_RSP:
{
- pLeader->PLength = sizeof(stLocalSFChangeIndicationAlt);
- pstChangeIndication = (stLocalSFChangeIndicationAlt *)pstAddIndication;
+ pLeader->PLength = sizeof(struct bcm_change_indication);
+ pstChangeIndication = (struct bcm_change_indication *)pstAddIndication;
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, CONN_MSG, DBG_LVL_ALL, "SENDING DSC ACK TO MAC %d", pLeader->PLength);
- *((stLocalSFChangeIndicationAlt *)&(Adapter->caDsxReqResp[LEADER_SIZE])) = *pstChangeIndication;
- ((stLocalSFChangeIndicationAlt *)&(Adapter->caDsxReqResp[LEADER_SIZE]))->u8Type = DSC_ACK;
+ *((struct bcm_change_indication *)&(Adapter->caDsxReqResp[LEADER_SIZE])) = *pstChangeIndication;
+ ((struct bcm_change_indication *)&(Adapter->caDsxReqResp[LEADER_SIZE]))->u8Type = DSC_ACK;
}
case DSC_ACK:
{
UINT uiSearchRuleIndex = 0;
- pstChangeIndication = (stLocalSFChangeIndicationAlt *)pstAddIndication;
+ pstChangeIndication = (struct bcm_change_indication *)pstAddIndication;
uiSearchRuleIndex = SearchSfid(Adapter, ntohl(pstChangeIndication->sfActiveSet.u32SFID));
if (uiSearchRuleIndex > NO_OF_QUEUES-1)
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "SF doesn't exist for which DSC_ACK is received");
@@ -1902,7 +1902,7 @@
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, CONN_MSG, DBG_LVL_ALL, "status =%d", status);
psSfInfo = &Adapter->PackInfo[status];
if (psSfInfo->pstSFIndication && copy_to_user(user_buffer,
- psSfInfo->pstSFIndication, sizeof(stLocalSFAddIndicationAlt))) {
+ psSfInfo->pstSFIndication, sizeof(struct bcm_add_indication_alt))) {
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "copy to user failed SFID %d, present in queue !!!", uiSFId);
status = -EFAULT;
return status;
diff --git a/drivers/staging/bcm/CmHost.h b/drivers/staging/bcm/CmHost.h
index 1c5a07c..eecad8d 100644
--- a/drivers/staging/bcm/CmHost.h
+++ b/drivers/staging/bcm/CmHost.h
@@ -1,147 +1,66 @@
-/// **************************************************************************
-/// (c) Beceem Communications Inc.
-/// All Rights Reserved
-///
-/// \file : CmHost.h
-/// \author : Rajeev Tirumala
-/// \date : September 8 , 2006
-/// \brief : Definitions for Connection Management Requests structure
-/// which we will use to setup our connection structures.Its high
-/// time we had a header file for CmHost.cpp to isolate the way
-/// f/w sends DSx messages and the way we interpret them in code.
-/// Revision History
-///
-/// Date Author Version Description
-/// 08-Sep-06 Rajeev 0.1 Created
-/// **************************************************************************
+/***************************************************************************
+ * (c) Beceem Communications Inc.
+ * All Rights Reserved
+ *
+ * file : CmHost.h
+ * author: Rajeev Tirumala
+ * date : September 8 , 2006
+ * brief : Definitions for Connection Management Requests structure
+ * which we will use to setup our connection structures.Its high
+ * time we had a header file for CmHost.cpp to isolate the way
+ * f/w sends DSx messages and the way we interpret them in code.
+ * Revision History
+ *
+ * Date Author Version Description
+ * 08-Sep-06 Rajeev 0.1 Created
+ ***************************************************************************/
#ifndef _CM_HOST_H
#define _CM_HOST_H
#pragma once
-#pragma pack (push,4)
+#pragma pack(push, 4)
-#define DSX_MESSAGE_EXCHANGE_BUFFER 0xBF60AC84 // This contains the pointer
-#define DSX_MESSAGE_EXCHANGE_BUFFER_SIZE 72000 // 24 K Bytes
+#define DSX_MESSAGE_EXCHANGE_BUFFER 0xBF60AC84 /* This contains the pointer */
+#define DSX_MESSAGE_EXCHANGE_BUFFER_SIZE 72000 /* 24 K Bytes */
-/// \brief structure stLocalSFAddRequest
-typedef struct stLocalSFAddRequestAlt{
- B_UINT8 u8Type;
- B_UINT8 u8Direction;
-
- B_UINT16 u16TID;
- /// \brief 16bitCID
- B_UINT16 u16CID;
- /// \brief 16bitVCID
- B_UINT16 u16VCID;
-
-
- struct bcm_connect_mgr_params sfParameterSet;
-
- //USE_MEMORY_MANAGER();
-}stLocalSFAddRequestAlt;
-
-/// \brief structure stLocalSFAddIndication
-typedef struct stLocalSFAddIndicationAlt{
- B_UINT8 u8Type;
- B_UINT8 u8Direction;
- B_UINT16 u16TID;
- /// \brief 16bitCID
- B_UINT16 u16CID;
- /// \brief 16bitVCID
- B_UINT16 u16VCID;
+struct bcm_add_indication_alt {
+ u8 u8Type;
+ u8 u8Direction;
+ u16 u16TID;
+ /* brief 16bitCID */
+ u16 u16CID;
+ /* brief 16bitVCID */
+ u16 u16VCID;
struct bcm_connect_mgr_params sfAuthorizedSet;
struct bcm_connect_mgr_params sfAdmittedSet;
struct bcm_connect_mgr_params sfActiveSet;
+ u8 u8CC; /* < Confirmation Code */
+ u8 u8Padd; /* < 8-bit Padding */
+ u16 u16Padd; /* < 16 bit Padding */
+};
- B_UINT8 u8CC; /**< Confirmation Code*/
- B_UINT8 u8Padd; /**< 8-bit Padding */
- B_UINT16 u16Padd; /**< 16 bit Padding */
-// USE_MEMORY_MANAGER();
-}stLocalSFAddIndicationAlt;
-
-/// \brief structure stLocalSFAddConfirmation
-typedef struct stLocalSFAddConfirmationAlt{
- B_UINT8 u8Type;
- B_UINT8 u8Direction;
- B_UINT16 u16TID;
- /// \brief 16bitCID
- B_UINT16 u16CID;
- /// \brief 16bitVCID
- B_UINT16 u16VCID;
+struct bcm_change_indication {
+ u8 u8Type;
+ u8 u8Direction;
+ u16 u16TID;
+ /* brief 16bitCID */
+ u16 u16CID;
+ /* brief 16bitVCID */
+ u16 u16VCID;
struct bcm_connect_mgr_params sfAuthorizedSet;
struct bcm_connect_mgr_params sfAdmittedSet;
struct bcm_connect_mgr_params sfActiveSet;
-}stLocalSFAddConfirmationAlt;
+ u8 u8CC; /* < Confirmation Code */
+ u8 u8Padd; /* < 8-bit Padding */
+ u16 u16Padd; /* < 16 bit */
+};
+unsigned long StoreCmControlResponseMessage(struct bcm_mini_adapter *Adapter, void *pvBuffer, unsigned int *puBufferLength);
+int AllocAdapterDsxBuffer(struct bcm_mini_adapter *Adapter);
+int FreeAdapterDsxBuffer(struct bcm_mini_adapter *Adapter);
+unsigned long SetUpTargetDsxBuffers(struct bcm_mini_adapter *Adapter);
+BOOLEAN CmControlResponseMessage(struct bcm_mini_adapter *Adapter, void *pvBuffer);
-/// \brief structure stLocalSFChangeRequest
-typedef struct stLocalSFChangeRequestAlt{
- B_UINT8 u8Type;
- B_UINT8 u8Direction;
- B_UINT16 u16TID;
- /// \brief 16bitCID
- B_UINT16 u16CID;
- /// \brief 16bitVCID
- B_UINT16 u16VCID;
- /*
- //Pointer location at which following connection manager param Structure can be read
- //from the target. We only get the address location and we need to read out the
- //entire connection manager param structure at the given location on target
- */
- struct bcm_connect_mgr_params sfAuthorizedSet;
- struct bcm_connect_mgr_params sfAdmittedSet;
- struct bcm_connect_mgr_params sfActiveSet;
-
- B_UINT8 u8CC; /**< Confirmation Code*/
- B_UINT8 u8Padd; /**< 8-bit Padding */
- B_UINT16 u16Padd; /**< 16 bit */
-
-}stLocalSFChangeRequestAlt;
-
-/// \brief structure stLocalSFChangeConfirmation
-typedef struct stLocalSFChangeConfirmationAlt{
- B_UINT8 u8Type;
- B_UINT8 u8Direction;
- B_UINT16 u16TID;
- /// \brief 16bitCID
- B_UINT16 u16CID;
- /// \brief 16bitVCID
- B_UINT16 u16VCID;
- struct bcm_connect_mgr_params sfAuthorizedSet;
- struct bcm_connect_mgr_params sfAdmittedSet;
- struct bcm_connect_mgr_params sfActiveSet;
-
-}stLocalSFChangeConfirmationAlt;
-
-/// \brief structure stLocalSFChangeIndication
-typedef struct stLocalSFChangeIndicationAlt{
- B_UINT8 u8Type;
- B_UINT8 u8Direction;
- B_UINT16 u16TID;
- /// \brief 16bitCID
- B_UINT16 u16CID;
- /// \brief 16bitVCID
- B_UINT16 u16VCID;
- struct bcm_connect_mgr_params sfAuthorizedSet;
- struct bcm_connect_mgr_params sfAdmittedSet;
- struct bcm_connect_mgr_params sfActiveSet;
-
- B_UINT8 u8CC; /**< Confirmation Code*/
- B_UINT8 u8Padd; /**< 8-bit Padding */
- B_UINT16 u16Padd; /**< 16 bit */
-
-}stLocalSFChangeIndicationAlt;
-
-ULONG StoreCmControlResponseMessage(struct bcm_mini_adapter *Adapter, PVOID pvBuffer,UINT *puBufferLength);
-
-INT AllocAdapterDsxBuffer(struct bcm_mini_adapter *Adapter);
-
-INT FreeAdapterDsxBuffer(struct bcm_mini_adapter *Adapter);
-ULONG SetUpTargetDsxBuffers(struct bcm_mini_adapter *Adapter);
-
-BOOLEAN CmControlResponseMessage(struct bcm_mini_adapter *Adapter, PVOID pvBuffer);
-
-
-#pragma pack (pop)
+#pragma pack(pop)
#endif
diff --git a/drivers/staging/bcm/HandleControlPacket.c b/drivers/staging/bcm/HandleControlPacket.c
index 25e5c68..1bb53e2 100644
--- a/drivers/staging/bcm/HandleControlPacket.c
+++ b/drivers/staging/bcm/HandleControlPacket.c
@@ -226,7 +226,7 @@
pTarang->AppCtrlQueueLen = 0;
/* dropped contrl packet statistics also should be reset. */
memset((PVOID)&pTarang->stDroppedAppCntrlMsgs, 0,
- sizeof(S_MIBS_DROPPED_APP_CNTRL_MESSAGES));
+ sizeof(struct bcm_mibs_dropped_cntrl_msg));
}
return STATUS_SUCCESS;
diff --git a/drivers/staging/bcm/HostMIBSInterface.h b/drivers/staging/bcm/HostMIBSInterface.h
index e34531b..f922ac4 100644
--- a/drivers/staging/bcm/HostMIBSInterface.h
+++ b/drivers/staging/bcm/HostMIBSInterface.h
@@ -1,5 +1,3 @@
-
-
#ifndef _HOST_MIBSINTERFACE_H
#define _HOST_MIBSINTERFACE_H
@@ -10,221 +8,185 @@
* statistics used for the MIBS.
*/
-#define MIBS_MAX_CLASSIFIERS 100
-#define MIBS_MAX_PHSRULES 100
-#define MIBS_MAX_SERVICEFLOWS 17
-#define MIBS_MAX_IP_RANGE_LENGTH 4
-#define MIBS_MAX_PORT_RANGE 4
-#define MIBS_MAX_PROTOCOL_LENGTH 32
-#define MIBS_MAX_PHS_LENGTHS 255
-#define MIBS_IPV6_ADDRESS_SIZEINBYTES 0x10
+#define MIBS_MAX_CLASSIFIERS 100
+#define MIBS_MAX_PHSRULES 100
+#define MIBS_MAX_SERVICEFLOWS 17
+#define MIBS_MAX_IP_RANGE_LENGTH 4
+#define MIBS_MAX_PORT_RANGE 4
+#define MIBS_MAX_PROTOCOL_LENGTH 32
+#define MIBS_MAX_PHS_LENGTHS 255
+#define MIBS_IPV6_ADDRESS_SIZEINBYTES 0x10
#define MIBS_IP_LENGTH_OF_ADDRESS 4
-#define MIBS_MAX_HIST_ENTRIES 12
-#define MIBS_PKTSIZEHIST_RANGE 128
+#define MIBS_MAX_HIST_ENTRIES 12
+#define MIBS_PKTSIZEHIST_RANGE 128
-typedef union _U_MIBS_IP_ADDRESS
-{
- struct
- {
- //Source Ip Address Range
- ULONG ulIpv4Addr[MIBS_MAX_IP_RANGE_LENGTH];
- //Source Ip Mask Address Range
- ULONG ulIpv4Mask[MIBS_MAX_IP_RANGE_LENGTH];
+union bcm_mibs_ip_addr {
+ struct {
+ /* Source Ip Address Range */
+ unsigned long ulIpv4Addr[MIBS_MAX_IP_RANGE_LENGTH];
+ /* Source Ip Mask Address Range */
+ unsigned long ulIpv4Mask[MIBS_MAX_IP_RANGE_LENGTH];
};
- struct
- {
- //Source Ip Address Range
- ULONG ulIpv6Addr[MIBS_MAX_IP_RANGE_LENGTH * 4];
- //Source Ip Mask Address Range
- ULONG ulIpv6Mask[MIBS_MAX_IP_RANGE_LENGTH * 4];
-
+ struct {
+ /* Source Ip Address Range */
+ unsigned long ulIpv6Addr[MIBS_MAX_IP_RANGE_LENGTH * 4];
+ /* Source Ip Mask Address Range */
+ unsigned long ulIpv6Mask[MIBS_MAX_IP_RANGE_LENGTH * 4];
};
- struct
- {
- UCHAR ucIpv4Address[MIBS_MAX_IP_RANGE_LENGTH *
- MIBS_IP_LENGTH_OF_ADDRESS];
- UCHAR ucIpv4Mask[MIBS_MAX_IP_RANGE_LENGTH *
- MIBS_IP_LENGTH_OF_ADDRESS];
+ struct {
+ unsigned char ucIpv4Address[MIBS_MAX_IP_RANGE_LENGTH * MIBS_IP_LENGTH_OF_ADDRESS];
+ unsigned char ucIpv4Mask[MIBS_MAX_IP_RANGE_LENGTH * MIBS_IP_LENGTH_OF_ADDRESS];
};
- struct
- {
- UCHAR ucIpv6Address[MIBS_MAX_IP_RANGE_LENGTH * MIBS_IPV6_ADDRESS_SIZEINBYTES];
- UCHAR ucIpv6Mask[MIBS_MAX_IP_RANGE_LENGTH * MIBS_IPV6_ADDRESS_SIZEINBYTES];
+ struct {
+ unsigned char ucIpv6Address[MIBS_MAX_IP_RANGE_LENGTH * MIBS_IPV6_ADDRESS_SIZEINBYTES];
+ unsigned char ucIpv6Mask[MIBS_MAX_IP_RANGE_LENGTH * MIBS_IPV6_ADDRESS_SIZEINBYTES];
};
-}U_MIBS_IP_ADDRESS;
+};
-
-typedef struct _S_MIBS_HOST_INFO
-{
- ULONG64 GoodTransmits;
- ULONG64 GoodReceives;
- // this to keep track of the Tx and Rx MailBox Registers.
- ULONG NumDesUsed;
- ULONG CurrNumFreeDesc;
- ULONG PrevNumFreeDesc;
- // to keep track the no of byte received
- ULONG PrevNumRcevBytes;
- ULONG CurrNumRcevBytes;
-
+struct bcm_mibs_host_info {
+ u64 GoodTransmits;
+ u64 GoodReceives;
+ /* this to keep track of the Tx and Rx MailBox Registers. */
+ unsigned long NumDesUsed;
+ unsigned long CurrNumFreeDesc;
+ unsigned long PrevNumFreeDesc;
+ /* to keep track the no of byte received */
+ unsigned long PrevNumRcevBytes;
+ unsigned long CurrNumRcevBytes;
/* QOS Related */
- ULONG BEBucketSize;
- ULONG rtPSBucketSize;
- ULONG LastTxQueueIndex;
- BOOLEAN TxOutofDescriptors;
- BOOLEAN TimerActive;
- UINT32 u32TotalDSD;
- UINT32 aTxPktSizeHist[MIBS_MAX_HIST_ENTRIES];
- UINT32 aRxPktSizeHist[MIBS_MAX_HIST_ENTRIES];
-}S_MIBS_HOST_INFO;
+ unsigned long BEBucketSize;
+ unsigned long rtPSBucketSize;
+ unsigned long LastTxQueueIndex;
+ bool TxOutofDescriptors;
+ bool TimerActive;
+ u32 u32TotalDSD;
+ u32 aTxPktSizeHist[MIBS_MAX_HIST_ENTRIES];
+ u32 aRxPktSizeHist[MIBS_MAX_HIST_ENTRIES];
+};
-typedef struct _S_MIBS_CLASSIFIER_RULE
-{
- ULONG ulSFID;
- UCHAR ucReserved[2];
- B_UINT16 uiClassifierRuleIndex;
- BOOLEAN bUsed;
- USHORT usVCID_Value;
- // This field detemines the Classifier Priority
- B_UINT8 u8ClassifierRulePriority;
- U_MIBS_IP_ADDRESS stSrcIpAddress;
- /*IP Source Address Length*/
- UCHAR ucIPSourceAddressLength;
-
- U_MIBS_IP_ADDRESS stDestIpAddress;
+struct bcm_mibs_classifier_rule {
+ unsigned long ulSFID;
+ unsigned char ucReserved[2];
+ u16 uiClassifierRuleIndex;
+ bool bUsed;
+ unsigned short usVCID_Value;
+ u8 u8ClassifierRulePriority;
+ union bcm_mibs_ip_addr stSrcIpAddress;
+ /* IP Source Address Length */
+ unsigned char ucIPSourceAddressLength;
+ union bcm_mibs_ip_addr stDestIpAddress;
/* IP Destination Address Length */
- UCHAR ucIPDestinationAddressLength;
- UCHAR ucIPTypeOfServiceLength;//Type of service Length
- UCHAR ucTosLow;//Tos Low
- UCHAR ucTosHigh;//Tos High
- UCHAR ucTosMask;//Tos Mask
- UCHAR ucProtocolLength;//protocol Length
- UCHAR ucProtocol[MIBS_MAX_PROTOCOL_LENGTH];//protocol Length
- USHORT usSrcPortRangeLo[MIBS_MAX_PORT_RANGE];
- USHORT usSrcPortRangeHi[MIBS_MAX_PORT_RANGE];
- UCHAR ucSrcPortRangeLength;
- USHORT usDestPortRangeLo[MIBS_MAX_PORT_RANGE];
- USHORT usDestPortRangeHi[MIBS_MAX_PORT_RANGE];
- UCHAR ucDestPortRangeLength;
- BOOLEAN bProtocolValid;
- BOOLEAN bTOSValid;
- BOOLEAN bDestIpValid;
- BOOLEAN bSrcIpValid;
- UCHAR ucDirection;
- BOOLEAN bIpv6Protocol;
- UINT32 u32PHSRuleID;
-}S_MIBS_CLASSIFIER_RULE;
+ unsigned char ucIPDestinationAddressLength;
+ unsigned char ucIPTypeOfServiceLength;
+ unsigned char ucTosLow;
+ unsigned char ucTosHigh;
+ unsigned char ucTosMask;
+ unsigned char ucProtocolLength;
+ unsigned char ucProtocol[MIBS_MAX_PROTOCOL_LENGTH];
+ unsigned short usSrcPortRangeLo[MIBS_MAX_PORT_RANGE];
+ unsigned short usSrcPortRangeHi[MIBS_MAX_PORT_RANGE];
+ unsigned char ucSrcPortRangeLength;
+ unsigned short usDestPortRangeLo[MIBS_MAX_PORT_RANGE];
+ unsigned short usDestPortRangeHi[MIBS_MAX_PORT_RANGE];
+ unsigned char ucDestPortRangeLength;
+ bool bProtocolValid;
+ bool bTOSValid;
+ bool bDestIpValid;
+ bool bSrcIpValid;
+ unsigned char ucDirection;
+ bool bIpv6Protocol;
+ u32 u32PHSRuleID;
+};
+struct bcm_mibs_phs_rule {
+ unsigned long ulSFID;
+ u8 u8PHSI;
+ u8 u8PHSFLength;
+ u8 u8PHSF[MIBS_MAX_PHS_LENGTHS];
+ u8 u8PHSMLength;
+ u8 u8PHSM[MIBS_MAX_PHS_LENGTHS];
+ u8 u8PHSS;
+ u8 u8PHSV;
+ u8 reserved[5];
+ long PHSModifiedBytes;
+ unsigned long PHSModifiedNumPackets;
+ unsigned long PHSErrorNumPackets;
+};
-typedef struct _S_MIBS_PHS_RULE
-{
- ULONG ulSFID;
- /// brief 8bit PHSI Of The Service Flow
- B_UINT8 u8PHSI;
- /// brief PHSF Of The Service Flow
- B_UINT8 u8PHSFLength;
- B_UINT8 u8PHSF[MIBS_MAX_PHS_LENGTHS];
- /// brief PHSM Of The Service Flow
- B_UINT8 u8PHSMLength;
- B_UINT8 u8PHSM[MIBS_MAX_PHS_LENGTHS];
- /// brief 8bit PHSS Of The Service Flow
- B_UINT8 u8PHSS;
- /// brief 8bit PHSV Of The Service Flow
- B_UINT8 u8PHSV;
- // Reserved bytes are 5, so that it is similar to S_PHS_RULE structure.
- B_UINT8 reserved[5];
+struct bcm_mibs_parameters {
+ u32 wmanIfSfid;
+ u32 wmanIfCmnCpsSfState;
+ u32 wmanIfCmnCpsMaxSustainedRate;
+ u32 wmanIfCmnCpsMaxTrafficBurst;
+ u32 wmanIfCmnCpsMinReservedRate;
+ u32 wmanIfCmnCpsToleratedJitter;
+ u32 wmanIfCmnCpsMaxLatency;
+ u32 wmanIfCmnCpsFixedVsVariableSduInd;
+ u32 wmanIfCmnCpsSduSize;
+ u32 wmanIfCmnCpsSfSchedulingType;
+ u32 wmanIfCmnCpsArqEnable;
+ u32 wmanIfCmnCpsArqWindowSize;
+ u32 wmanIfCmnCpsArqBlockLifetime;
+ u32 wmanIfCmnCpsArqSyncLossTimeout;
+ u32 wmanIfCmnCpsArqDeliverInOrder;
+ u32 wmanIfCmnCpsArqRxPurgeTimeout;
+ u32 wmanIfCmnCpsArqBlockSize;
+ u32 wmanIfCmnCpsMinRsvdTolerableRate;
+ u32 wmanIfCmnCpsReqTxPolicy;
+ u32 wmanIfCmnSfCsSpecification;
+ u32 wmanIfCmnCpsTargetSaid;
+};
- LONG PHSModifiedBytes;
- ULONG PHSModifiedNumPackets;
- ULONG PHSErrorNumPackets;
-}S_MIBS_PHS_RULE;
+struct bcm_mibs_table {
+ unsigned long ulSFID;
+ unsigned short usVCID_Value;
+ unsigned int uiThreshold;
+ u8 u8TrafficPriority;
+ bool bValid;
+ bool bActive;
+ bool bActivateRequestSent;
+ u8 u8QueueType;
+ unsigned int uiMaxBucketSize;
+ unsigned int uiCurrentQueueDepthOnTarget;
+ unsigned int uiCurrentBytesOnHost;
+ unsigned int uiCurrentPacketsOnHost;
+ unsigned int uiDroppedCountBytes;
+ unsigned int uiDroppedCountPackets;
+ unsigned int uiSentBytes;
+ unsigned int uiSentPackets;
+ unsigned int uiCurrentDrainRate;
+ unsigned int uiThisPeriodSentBytes;
+ u64 liDrainCalculated;
+ unsigned int uiCurrentTokenCount;
+ u64 liLastUpdateTokenAt;
+ unsigned int uiMaxAllowedRate;
+ unsigned int NumOfPacketsSent;
+ unsigned char ucDirection;
+ unsigned short usCID;
+ struct bcm_mibs_parameters stMibsExtServiceFlowTable;
+ unsigned int uiCurrentRxRate;
+ unsigned int uiThisPeriodRxBytes;
+ unsigned int uiTotalRxBytes;
+ unsigned int uiTotalTxBytes;
+};
-typedef struct _S_MIBS_EXTSERVICEFLOW_PARAMETERS
-{
- UINT32 wmanIfSfid;
- UINT32 wmanIfCmnCpsSfState;
- UINT32 wmanIfCmnCpsMaxSustainedRate;
- UINT32 wmanIfCmnCpsMaxTrafficBurst;
- UINT32 wmanIfCmnCpsMinReservedRate;
- UINT32 wmanIfCmnCpsToleratedJitter;
- UINT32 wmanIfCmnCpsMaxLatency;
- UINT32 wmanIfCmnCpsFixedVsVariableSduInd;
- UINT32 wmanIfCmnCpsSduSize;
- UINT32 wmanIfCmnCpsSfSchedulingType;
- UINT32 wmanIfCmnCpsArqEnable;
- UINT32 wmanIfCmnCpsArqWindowSize;
- UINT32 wmanIfCmnCpsArqBlockLifetime;
- UINT32 wmanIfCmnCpsArqSyncLossTimeout;
- UINT32 wmanIfCmnCpsArqDeliverInOrder;
- UINT32 wmanIfCmnCpsArqRxPurgeTimeout;
- UINT32 wmanIfCmnCpsArqBlockSize;
- UINT32 wmanIfCmnCpsMinRsvdTolerableRate;
- UINT32 wmanIfCmnCpsReqTxPolicy;
- UINT32 wmanIfCmnSfCsSpecification;
- UINT32 wmanIfCmnCpsTargetSaid;
+struct bcm_mibs_dropped_cntrl_msg {
+ unsigned long cm_responses;
+ unsigned long cm_control_newdsx_multiclassifier_resp;
+ unsigned long link_control_resp;
+ unsigned long status_rsp;
+ unsigned long stats_pointer_resp;
+ unsigned long idle_mode_status;
+ unsigned long auth_ss_host_msg;
+ unsigned long low_priority_message;
+};
-}S_MIBS_EXTSERVICEFLOW_PARAMETERS;
+struct bcm_host_stats_mibs {
+ struct bcm_mibs_host_info stHostInfo;
+ struct bcm_mibs_classifier_rule astClassifierTable[MIBS_MAX_CLASSIFIERS];
+ struct bcm_mibs_table astSFtable[MIBS_MAX_SERVICEFLOWS];
+ struct bcm_mibs_phs_rule astPhsRulesTable[MIBS_MAX_PHSRULES];
+ struct bcm_mibs_dropped_cntrl_msg stDroppedAppCntrlMsgs;
+};
-
-typedef struct _S_MIBS_SERVICEFLOW_TABLE
-{
- //classification extension Rule
- ULONG ulSFID;
- USHORT usVCID_Value;
- UINT uiThreshold;
- // This field determines the priority of the SF Queues
- B_UINT8 u8TrafficPriority;
-
- BOOLEAN bValid;
- BOOLEAN bActive;
- BOOLEAN bActivateRequestSent;
- //BE or rtPS
- B_UINT8 u8QueueType;
- //maximum size of the bucket for the queue
- UINT uiMaxBucketSize;
- UINT uiCurrentQueueDepthOnTarget;
- UINT uiCurrentBytesOnHost;
- UINT uiCurrentPacketsOnHost;
- UINT uiDroppedCountBytes;
- UINT uiDroppedCountPackets;
- UINT uiSentBytes;
- UINT uiSentPackets;
- UINT uiCurrentDrainRate;
- UINT uiThisPeriodSentBytes;
- LARGE_INTEGER liDrainCalculated;
- UINT uiCurrentTokenCount;
- LARGE_INTEGER liLastUpdateTokenAt;
- UINT uiMaxAllowedRate;
- UINT NumOfPacketsSent;
- UCHAR ucDirection;
- USHORT usCID;
- S_MIBS_EXTSERVICEFLOW_PARAMETERS stMibsExtServiceFlowTable;
- UINT uiCurrentRxRate;
- UINT uiThisPeriodRxBytes;
- UINT uiTotalRxBytes;
- UINT uiTotalTxBytes;
-}S_MIBS_SERVICEFLOW_TABLE;
-
-typedef struct _S_MIBS_DROPPED_APP_CNTRL_MESSAGES
-{
- ULONG cm_responses;
- ULONG cm_control_newdsx_multiclassifier_resp;
- ULONG link_control_resp;
- ULONG status_rsp;
- ULONG stats_pointer_resp;
- ULONG idle_mode_status;
- ULONG auth_ss_host_msg;
- ULONG low_priority_message;
-
-}S_MIBS_DROPPED_APP_CNTRL_MESSAGES;
-
-typedef struct _S_MIBS_HOST_STATS_MIBS
-{
- S_MIBS_HOST_INFO stHostInfo;
- S_MIBS_CLASSIFIER_RULE astClassifierTable[MIBS_MAX_CLASSIFIERS];
- S_MIBS_SERVICEFLOW_TABLE astSFtable[MIBS_MAX_SERVICEFLOWS];
- S_MIBS_PHS_RULE astPhsRulesTable[MIBS_MAX_PHSRULES];
- S_MIBS_DROPPED_APP_CNTRL_MESSAGES stDroppedAppCntrlMsgs;
-}S_MIBS_HOST_STATS_MIBS;
#endif
-
-
diff --git a/drivers/staging/bcm/InterfaceAdapter.h b/drivers/staging/bcm/InterfaceAdapter.h
index 4607c26..06a6b18 100644
--- a/drivers/staging/bcm/InterfaceAdapter.h
+++ b/drivers/staging/bcm/InterfaceAdapter.h
@@ -1,97 +1,79 @@
#ifndef _INTERFACE_ADAPTER_H
#define _INTERFACE_ADAPTER_H
-typedef struct _BULK_ENDP_IN
-{
- PCHAR bulk_in_buffer;
- size_t bulk_in_size;
- UCHAR bulk_in_endpointAddr;
- UINT bulk_in_pipe;
-}BULK_ENDP_IN, *PBULK_ENDP_IN;
+struct bcm_bulk_endpoint_in {
+ char *bulk_in_buffer;
+ size_t bulk_in_size;
+ unsigned char bulk_in_endpointAddr;
+ unsigned int bulk_in_pipe;
+};
+struct bcm_bulk_endpoint_out {
+ unsigned char bulk_out_buffer;
+ size_t bulk_out_size;
+ unsigned char bulk_out_endpointAddr;
+ unsigned int bulk_out_pipe;
+ /* this is used when int out endpoint is used as bulk out end point */
+ unsigned char int_out_interval;
+};
-typedef struct _BULK_ENDP_OUT
-{
- UCHAR bulk_out_buffer;
- size_t bulk_out_size;
- UCHAR bulk_out_endpointAddr;
- UINT bulk_out_pipe;
- //this is used when int out endpoint is used as bulk out end point
- UCHAR int_out_interval;
-}BULK_ENDP_OUT, *PBULK_ENDP_OUT;
+struct bcm_intr_endpoint_in {
+ char *int_in_buffer;
+ size_t int_in_size;
+ unsigned char int_in_endpointAddr;
+ unsigned char int_in_interval;
+ unsigned int int_in_pipe;
+};
-typedef struct _INTR_ENDP_IN
-{
- PCHAR int_in_buffer;
- size_t int_in_size;
- UCHAR int_in_endpointAddr;
- UCHAR int_in_interval;
- UINT int_in_pipe;
-}INTR_ENDP_IN, *PINTR_ENDP_IN;
+struct bcm_intr_endpoint_out {
+ char *int_out_buffer;
+ size_t int_out_size;
+ unsigned char int_out_endpointAddr;
+ unsigned char int_out_interval;
+ unsigned int int_out_pipe;
+};
-typedef struct _INTR_ENDP_OUT
-{
- PCHAR int_out_buffer;
- size_t int_out_size;
- UCHAR int_out_endpointAddr;
- UCHAR int_out_interval;
- UINT int_out_pipe;
-}INTR_ENDP_OUT, *PINTR_ENDP_OUT;
-
-
-typedef struct _USB_TCB
-{
+struct bcm_usb_tcb {
struct urb *urb;
- PVOID psIntfAdapter;
- BOOLEAN bUsed;
-}USB_TCB, *PUSB_TCB;
+ void *psIntfAdapter;
+ bool bUsed;
+};
-
-typedef struct _USB_RCB
-{
+struct bcm_usb_rcb {
struct urb *urb;
- PVOID psIntfAdapter;
- BOOLEAN bUsed;
-}USB_RCB, *PUSB_RCB;
+ void *psIntfAdapter;
+ bool bUsed;
+};
/*
-//This is the interface specific Sub-Adapter
-//Structure.
-*/
-typedef struct _S_INTERFACE_ADAPTER
-{
- struct usb_device * udev;
- struct usb_interface * interface;
-
+ * This is the interface specific Sub-Adapter
+ * Structure.
+ */
+struct bcm_interface_adapter {
+ struct usb_device *udev;
+ struct usb_interface *interface;
/* Bulk endpoint in info */
- BULK_ENDP_IN sBulkIn;
+ struct bcm_bulk_endpoint_in sBulkIn;
/* Bulk endpoint out info */
- BULK_ENDP_OUT sBulkOut;
+ struct bcm_bulk_endpoint_out sBulkOut;
/* Interrupt endpoint in info */
- INTR_ENDP_IN sIntrIn;
+ struct bcm_intr_endpoint_in sIntrIn;
/* Interrupt endpoint out info */
- INTR_ENDP_OUT sIntrOut;
-
-
-
- ULONG ulInterruptData[2];
-
+ struct bcm_intr_endpoint_out sIntrOut;
+ unsigned long ulInterruptData[2];
struct urb *psInterruptUrb;
-
- USB_TCB asUsbTcb[MAXIMUM_USB_TCB];
- USB_RCB asUsbRcb[MAXIMUM_USB_RCB];
- atomic_t uNumTcbUsed;
- atomic_t uCurrTcb;
- atomic_t uNumRcbUsed;
- atomic_t uCurrRcb;
-
+ struct bcm_usb_tcb asUsbTcb[MAXIMUM_USB_TCB];
+ struct bcm_usb_rcb asUsbRcb[MAXIMUM_USB_RCB];
+ atomic_t uNumTcbUsed;
+ atomic_t uCurrTcb;
+ atomic_t uNumRcbUsed;
+ atomic_t uCurrRcb;
struct bcm_mini_adapter *psAdapter;
- BOOLEAN bFlashBoot;
- BOOLEAN bHighSpeedDevice ;
-
- BOOLEAN bSuspended;
- BOOLEAN bPreparingForBusSuspend;
+ bool bFlashBoot;
+ bool bHighSpeedDevice;
+ bool bSuspended;
+ bool bPreparingForBusSuspend;
struct work_struct usbSuspendWork;
-}S_INTERFACE_ADAPTER,*PS_INTERFACE_ADAPTER;
+};
#endif
diff --git a/drivers/staging/bcm/InterfaceDld.c b/drivers/staging/bcm/InterfaceDld.c
index 3a89e33..87117a7 100644
--- a/drivers/staging/bcm/InterfaceDld.c
+++ b/drivers/staging/bcm/InterfaceDld.c
@@ -6,7 +6,7 @@
mm_segment_t oldfs = {0};
int errno = 0, len = 0; /* ,is_config_file = 0 */
loff_t pos = 0;
- PS_INTERFACE_ADAPTER psIntfAdapter = (PS_INTERFACE_ADAPTER)arg;
+ struct bcm_interface_adapter *psIntfAdapter = (struct bcm_interface_adapter *)arg;
/* struct bcm_mini_adapter *Adapter = psIntfAdapter->psAdapter; */
char *buff = kmalloc(MAX_TRANSFER_CTRL_BYTE_USB, GFP_KERNEL);
@@ -61,7 +61,7 @@
loff_t pos = 0;
static int fw_down;
INT Status = STATUS_SUCCESS;
- PS_INTERFACE_ADAPTER psIntfAdapter = (PS_INTERFACE_ADAPTER)arg;
+ struct bcm_interface_adapter *psIntfAdapter = (struct bcm_interface_adapter *)arg;
int bytes;
buff = kmalloc(MAX_TRANSFER_CTRL_BYTE_USB, GFP_DMA);
diff --git a/drivers/staging/bcm/InterfaceIdleMode.c b/drivers/staging/bcm/InterfaceIdleMode.c
index 4f2f490..a1bf215 100644
--- a/drivers/staging/bcm/InterfaceIdleMode.c
+++ b/drivers/staging/bcm/InterfaceIdleMode.c
@@ -156,7 +156,7 @@
int lenwritten = 0;
unsigned char aucAbortPattern[8]={0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF};
- PS_INTERFACE_ADAPTER psInterfaceAdapter = Adapter->pvInterfaceAdapter;
+ struct bcm_interface_adapter *psInterfaceAdapter = Adapter->pvInterfaceAdapter;
//Abort Bus suspend if its already suspended
if((TRUE == psInterfaceAdapter->bSuspended) && (TRUE == Adapter->bDoSuspend))
diff --git a/drivers/staging/bcm/InterfaceIdleMode.h b/drivers/staging/bcm/InterfaceIdleMode.h
index c3338c8..2ef6400 100644
--- a/drivers/staging/bcm/InterfaceIdleMode.h
+++ b/drivers/staging/bcm/InterfaceIdleMode.h
@@ -3,11 +3,12 @@
INT InterfaceIdleModeWakeup(struct bcm_mini_adapter *Adapter);
-INT InterfaceIdleModeRespond(struct bcm_mini_adapter *Adapter, unsigned int *puiBuffer);
+INT InterfaceIdleModeRespond(struct bcm_mini_adapter *Adapter,
+ unsigned int *puiBuffer);
VOID InterfaceWriteIdleModeWakePattern(struct bcm_mini_adapter *Adapter);
-INT InterfaceWakeUp(struct bcm_mini_adapter * Adapter);
+INT InterfaceWakeUp(struct bcm_mini_adapter *Adapter);
VOID InterfaceHandleShutdownModeWakeup(struct bcm_mini_adapter *Adapter);
#endif
diff --git a/drivers/staging/bcm/InterfaceInit.c b/drivers/staging/bcm/InterfaceInit.c
index b05f5f7..eb246430 100644
--- a/drivers/staging/bcm/InterfaceInit.c
+++ b/drivers/staging/bcm/InterfaceInit.c
@@ -4,11 +4,12 @@
{ USB_DEVICE(BCM_USB_VENDOR_ID_T3, BCM_USB_PRODUCT_ID_T3) },
{ USB_DEVICE(BCM_USB_VENDOR_ID_T3, BCM_USB_PRODUCT_ID_T3B) },
{ USB_DEVICE(BCM_USB_VENDOR_ID_T3, BCM_USB_PRODUCT_ID_T3L) },
- { USB_DEVICE(BCM_USB_VENDOR_ID_T3, BCM_USB_PRODUCT_ID_SM250) },
+ { USB_DEVICE(BCM_USB_VENDOR_ID_T3, BCM_USB_PRODUCT_ID_SYM) },
{ USB_DEVICE(BCM_USB_VENDOR_ID_ZTE, BCM_USB_PRODUCT_ID_226) },
{ USB_DEVICE(BCM_USB_VENDOR_ID_FOXCONN, BCM_USB_PRODUCT_ID_1901) },
{ USB_DEVICE(BCM_USB_VENDOR_ID_ZTE, BCM_USB_PRODUCT_ID_ZTE_TU25) },
{ USB_DEVICE(BCM_USB_VENDOR_ID_ZTE, BCM_USB_PRODUCT_ID_ZTE_226) },
+ { USB_DEVICE(BCM_USB_VENDOR_ID_ZTE, BCM_USB_PRODUCT_ID_ZTE_326) },
{ }
};
MODULE_DEVICE_TABLE(usb, InterfaceUsbtable);
@@ -22,9 +23,9 @@
| NETIF_MSG_TIMER | NETIF_MSG_TX_ERR | NETIF_MSG_RX_ERR
| NETIF_MSG_IFUP | NETIF_MSG_IFDOWN;
-static int InterfaceAdapterInit(PS_INTERFACE_ADAPTER Adapter);
+static int InterfaceAdapterInit(struct bcm_interface_adapter *Adapter);
-static void InterfaceAdapterFree(PS_INTERFACE_ADAPTER psIntfAdapter)
+static void InterfaceAdapterFree(struct bcm_interface_adapter *psIntfAdapter)
{
int i = 0;
@@ -79,7 +80,7 @@
ulReg = ntohl(EP2_CFG_REG);
BeceemEEPROMBulkWrite(Adapter, (PUCHAR)&ulReg, 0x132, 4, TRUE);
- if (((PS_INTERFACE_ADAPTER)(Adapter->pvInterfaceAdapter))->bHighSpeedDevice == TRUE) {
+ if (((struct bcm_interface_adapter *)(Adapter->pvInterfaceAdapter))->bHighSpeedDevice == TRUE) {
ulReg = ntohl(EP2_CFG_INT);
BeceemEEPROMBulkWrite(Adapter, (PUCHAR)&ulReg, 0x136, 4, TRUE);
} else {
@@ -145,7 +146,7 @@
struct usb_device *udev = interface_to_usbdev(intf);
int retval;
struct bcm_mini_adapter *psAdapter;
- PS_INTERFACE_ADAPTER psIntfAdapter;
+ struct bcm_interface_adapter *psIntfAdapter;
struct net_device *ndev;
/* Reserve one extra queue for the bit-bucket */
@@ -189,7 +190,7 @@
}
/* Allocate interface adapter structure */
- psIntfAdapter = kzalloc(sizeof(S_INTERFACE_ADAPTER), GFP_KERNEL);
+ psIntfAdapter = kzalloc(sizeof(struct bcm_interface_adapter), GFP_KERNEL);
if (psIntfAdapter == NULL) {
dev_err(&udev->dev, DRV_NAME ": no memory for Interface adapter\n");
AdapterFree(psAdapter);
@@ -257,7 +258,7 @@
static void usbbcm_disconnect(struct usb_interface *intf)
{
- PS_INTERFACE_ADAPTER psIntfAdapter = usb_get_intfdata(intf);
+ struct bcm_interface_adapter *psIntfAdapter = usb_get_intfdata(intf);
struct bcm_mini_adapter *psAdapter;
struct usb_device *udev = interface_to_usbdev(intf);
@@ -276,7 +277,7 @@
usb_put_dev(udev);
}
-static int AllocUsbCb(PS_INTERFACE_ADAPTER psIntfAdapter)
+static int AllocUsbCb(struct bcm_interface_adapter *psIntfAdapter)
{
int i = 0;
@@ -311,7 +312,7 @@
return 0;
}
-static int device_run(PS_INTERFACE_ADAPTER psIntfAdapter)
+static int device_run(struct bcm_interface_adapter *psIntfAdapter)
{
int value = 0;
UINT status = STATUS_SUCCESS;
@@ -421,7 +422,7 @@
return bcm_usb_endpoint_xfer_isoc(epd) && bcm_usb_endpoint_dir_out(epd);
}
-static int InterfaceAdapterInit(PS_INTERFACE_ADAPTER psIntfAdapter)
+static int InterfaceAdapterInit(struct bcm_interface_adapter *psIntfAdapter)
{
struct usb_host_interface *iface_desc;
struct usb_endpoint_descriptor *endpoint;
@@ -619,7 +620,7 @@
static int InterfaceSuspend(struct usb_interface *intf, pm_message_t message)
{
- PS_INTERFACE_ADAPTER psIntfAdapter = usb_get_intfdata(intf);
+ struct bcm_interface_adapter *psIntfAdapter = usb_get_intfdata(intf);
psIntfAdapter->bSuspended = TRUE;
@@ -646,7 +647,7 @@
static int InterfaceResume(struct usb_interface *intf)
{
- PS_INTERFACE_ADAPTER psIntfAdapter = usb_get_intfdata(intf);
+ struct bcm_interface_adapter *psIntfAdapter = usb_get_intfdata(intf);
mdelay(100);
psIntfAdapter->bSuspended = FALSE;
diff --git a/drivers/staging/bcm/InterfaceInit.h b/drivers/staging/bcm/InterfaceInit.h
index 866924e..ffa6e96 100644
--- a/drivers/staging/bcm/InterfaceInit.h
+++ b/drivers/staging/bcm/InterfaceInit.h
@@ -8,11 +8,11 @@
#define BCM_USB_PRODUCT_ID_T3 0x0300
#define BCM_USB_PRODUCT_ID_T3B 0x0210
#define BCM_USB_PRODUCT_ID_T3L 0x0220
-#define BCM_USB_PRODUCT_ID_SM250 0xbccd
#define BCM_USB_PRODUCT_ID_SYM 0x15E
#define BCM_USB_PRODUCT_ID_1901 0xe017
#define BCM_USB_PRODUCT_ID_226 0x0132 /* not sure if this is valid */
#define BCM_USB_PRODUCT_ID_ZTE_226 0x172
+#define BCM_USB_PRODUCT_ID_ZTE_326 0x173 /* ZTE AX326 */
#define BCM_USB_PRODUCT_ID_ZTE_TU25 0x0007
#define BCM_USB_MINOR_BASE 192
@@ -21,6 +21,6 @@
int InterfaceExit(void);
-int usbbcm_worker_thread(PS_INTERFACE_ADAPTER psIntfAdapter);
+int usbbcm_worker_thread(struct bcm_interface_adapter *psIntfAdapter);
#endif
diff --git a/drivers/staging/bcm/InterfaceIsr.c b/drivers/staging/bcm/InterfaceIsr.c
index 6ee3428..8322f1b 100644
--- a/drivers/staging/bcm/InterfaceIsr.c
+++ b/drivers/staging/bcm/InterfaceIsr.c
@@ -4,7 +4,7 @@
static void read_int_callback(struct urb *urb/*, struct pt_regs *regs*/)
{
int status = urb->status;
- PS_INTERFACE_ADAPTER psIntfAdapter = (PS_INTERFACE_ADAPTER)urb->context;
+ struct bcm_interface_adapter *psIntfAdapter = (struct bcm_interface_adapter *)urb->context;
struct bcm_mini_adapter *Adapter = psIntfAdapter->psAdapter ;
if (netif_msg_intr(Adapter))
@@ -114,7 +114,7 @@
}
-int CreateInterruptUrb(PS_INTERFACE_ADAPTER psIntfAdapter)
+int CreateInterruptUrb(struct bcm_interface_adapter *psIntfAdapter)
{
psIntfAdapter->psInterruptUrb = usb_alloc_urb(0, GFP_KERNEL);
if (!psIntfAdapter->psInterruptUrb)
@@ -143,7 +143,7 @@
}
-INT StartInterruptUrb(PS_INTERFACE_ADAPTER psIntfAdapter)
+INT StartInterruptUrb(struct bcm_interface_adapter *psIntfAdapter)
{
INT status = 0;
diff --git a/drivers/staging/bcm/InterfaceIsr.h b/drivers/staging/bcm/InterfaceIsr.h
index 4039978..3073bd7 100644
--- a/drivers/staging/bcm/InterfaceIsr.h
+++ b/drivers/staging/bcm/InterfaceIsr.h
@@ -1,10 +1,10 @@
#ifndef _INTERFACE_ISR_H
#define _INTERFACE_ISR_H
-int CreateInterruptUrb(PS_INTERFACE_ADAPTER psIntfAdapter);
+int CreateInterruptUrb(struct bcm_interface_adapter *psIntfAdapter);
-INT StartInterruptUrb(PS_INTERFACE_ADAPTER psIntfAdapter);
+INT StartInterruptUrb(struct bcm_interface_adapter *psIntfAdapter);
VOID InterfaceEnableInterrupt(struct bcm_mini_adapter *Adapter);
diff --git a/drivers/staging/bcm/InterfaceMisc.c b/drivers/staging/bcm/InterfaceMisc.c
index bbe9099..afca010 100644
--- a/drivers/staging/bcm/InterfaceMisc.c
+++ b/drivers/staging/bcm/InterfaceMisc.c
@@ -1,17 +1,14 @@
#include "headers.h"
-INT InterfaceRDM(PS_INTERFACE_ADAPTER psIntfAdapter,
- UINT addr,
- PVOID buff,
- INT len)
+int InterfaceRDM(struct bcm_interface_adapter *psIntfAdapter,
+ unsigned int addr,
+ void *buff,
+ int len)
{
int bytes;
- USHORT usRetries = 0;
- if (psIntfAdapter == NULL) {
- BCM_DEBUG_PRINT(psIntfAdapter->psAdapter, DBG_TYPE_PRINTK, 0, 0, "Interface Adapter is NULL");
+ if (!psIntfAdapter)
return -EINVAL;
- }
if (psIntfAdapter->psAdapter->device_removed == TRUE) {
BCM_DEBUG_PRINT(psIntfAdapter->psAdapter, DBG_TYPE_PRINTK, 0, 0, "Device got removed");
@@ -29,27 +26,21 @@
}
psIntfAdapter->psAdapter->DeviceAccess = TRUE;
- do {
- bytes = usb_control_msg(psIntfAdapter->udev,
- usb_rcvctrlpipe(psIntfAdapter->udev, 0),
- 0x02,
- 0xC2,
- (addr & 0xFFFF),
- ((addr >> 16) & 0xFFFF),
- buff,
- len,
- 5000);
+ bytes = usb_control_msg(psIntfAdapter->udev,
+ usb_rcvctrlpipe(psIntfAdapter->udev, 0),
+ 0x02,
+ 0xC2,
+ (addr & 0xFFFF),
+ ((addr >> 16) & 0xFFFF),
+ buff,
+ len,
+ 5000);
- usRetries++;
- if (-ENODEV == bytes) {
- psIntfAdapter->psAdapter->device_removed = TRUE;
- break;
- }
-
- } while ((bytes < 0) && (usRetries < MAX_RDM_WRM_RETIRES));
+ if (-ENODEV == bytes)
+ psIntfAdapter->psAdapter->device_removed = TRUE;
if (bytes < 0)
- BCM_DEBUG_PRINT(psIntfAdapter->psAdapter, DBG_TYPE_OTHERS, RDM, DBG_LVL_ALL, "RDM failed status :%d, retires :%d", bytes, usRetries);
+ BCM_DEBUG_PRINT(psIntfAdapter->psAdapter, DBG_TYPE_OTHERS, RDM, DBG_LVL_ALL, "RDM failed status :%d", bytes);
else
BCM_DEBUG_PRINT(psIntfAdapter->psAdapter, DBG_TYPE_OTHERS, RDM, DBG_LVL_ALL, "RDM sent %d", bytes);
@@ -57,18 +48,15 @@
return bytes;
}
-INT InterfaceWRM(PS_INTERFACE_ADAPTER psIntfAdapter,
- UINT addr,
- PVOID buff,
- INT len)
+int InterfaceWRM(struct bcm_interface_adapter *psIntfAdapter,
+ unsigned int addr,
+ void *buff,
+ int len)
{
int retval = 0;
- USHORT usRetries = 0;
- if (psIntfAdapter == NULL) {
- BCM_DEBUG_PRINT(psIntfAdapter->psAdapter, DBG_TYPE_PRINTK, 0, 0, "Interface Adapter is NULL");
+ if (!psIntfAdapter)
return -EINVAL;
- }
if (psIntfAdapter->psAdapter->device_removed == TRUE) {
BCM_DEBUG_PRINT(psIntfAdapter->psAdapter, DBG_TYPE_PRINTK, 0, 0, "Device got removed");
@@ -87,27 +75,21 @@
psIntfAdapter->psAdapter->DeviceAccess = TRUE;
- do {
- retval = usb_control_msg(psIntfAdapter->udev,
- usb_sndctrlpipe(psIntfAdapter->udev, 0),
- 0x01,
- 0x42,
- (addr & 0xFFFF),
- ((addr >> 16) & 0xFFFF),
- buff,
- len,
- 5000);
+ retval = usb_control_msg(psIntfAdapter->udev,
+ usb_sndctrlpipe(psIntfAdapter->udev, 0),
+ 0x01,
+ 0x42,
+ (addr & 0xFFFF),
+ ((addr >> 16) & 0xFFFF),
+ buff,
+ len,
+ 5000);
- usRetries++;
- if (-ENODEV == retval) {
- psIntfAdapter->psAdapter->device_removed = TRUE;
- break;
- }
-
- } while ((retval < 0) && (usRetries < MAX_RDM_WRM_RETIRES));
+ if (-ENODEV == retval)
+ psIntfAdapter->psAdapter->device_removed = TRUE;
if (retval < 0) {
- BCM_DEBUG_PRINT(psIntfAdapter->psAdapter, DBG_TYPE_OTHERS, WRM, DBG_LVL_ALL, "WRM failed status :%d, retires :%d", retval, usRetries);
+ BCM_DEBUG_PRINT(psIntfAdapter->psAdapter, DBG_TYPE_OTHERS, WRM, DBG_LVL_ALL, "WRM failed status :%d", retval);
psIntfAdapter->psAdapter->DeviceAccess = FALSE;
return retval;
} else {
@@ -117,26 +99,26 @@
}
}
-INT BcmRDM(PVOID arg,
- UINT addr,
- PVOID buff,
- INT len)
+int BcmRDM(void *arg,
+ unsigned int addr,
+ void *buff,
+ int len)
{
- return InterfaceRDM((PS_INTERFACE_ADAPTER)arg, addr, buff, len);
+ return InterfaceRDM((struct bcm_interface_adapter*)arg, addr, buff, len);
}
-INT BcmWRM(PVOID arg,
- UINT addr,
- PVOID buff,
- INT len)
+int BcmWRM(void *arg,
+ unsigned int addr,
+ void *buff,
+ int len)
{
- return InterfaceWRM((PS_INTERFACE_ADAPTER)arg, addr, buff, len);
+ return InterfaceWRM((struct bcm_interface_adapter *)arg, addr, buff, len);
}
-INT Bcm_clear_halt_of_endpoints(struct bcm_mini_adapter *Adapter)
+int Bcm_clear_halt_of_endpoints(struct bcm_mini_adapter *Adapter)
{
- PS_INTERFACE_ADAPTER psIntfAdapter = (PS_INTERFACE_ADAPTER)(Adapter->pvInterfaceAdapter);
- INT status = STATUS_SUCCESS;
+ struct bcm_interface_adapter *psIntfAdapter = (struct bcm_interface_adapter *)(Adapter->pvInterfaceAdapter);
+ int status = STATUS_SUCCESS;
/*
* usb_clear_halt - tells device to clear endpoint halt/stall condition
@@ -172,10 +154,10 @@
return status;
}
-VOID Bcm_kill_all_URBs(PS_INTERFACE_ADAPTER psIntfAdapter)
+void Bcm_kill_all_URBs(struct bcm_interface_adapter *psIntfAdapter)
{
struct urb *tempUrb = NULL;
- UINT i;
+ unsigned int i;
/*
* usb_kill_urb - cancel a transfer request and wait for it to finish
@@ -193,7 +175,7 @@
*/
/* Cancel submitted Interrupt-URB's */
- if (psIntfAdapter->psInterruptUrb != NULL) {
+ if (psIntfAdapter->psInterruptUrb) {
if (psIntfAdapter->psInterruptUrb->status == -EINPROGRESS)
usb_kill_urb(psIntfAdapter->psInterruptUrb);
}
@@ -222,11 +204,11 @@
atomic_set(&psIntfAdapter->uCurrRcb, 0);
}
-VOID putUsbSuspend(struct work_struct *work)
+void putUsbSuspend(struct work_struct *work)
{
- PS_INTERFACE_ADAPTER psIntfAdapter = NULL;
+ struct bcm_interface_adapter *psIntfAdapter = NULL;
struct usb_interface *intf = NULL;
- psIntfAdapter = container_of(work, S_INTERFACE_ADAPTER, usbSuspendWork);
+ psIntfAdapter = container_of(work, struct bcm_interface_adapter, usbSuspendWork);
intf = psIntfAdapter->interface;
if (psIntfAdapter->bSuspended == FALSE)
diff --git a/drivers/staging/bcm/InterfaceMisc.h b/drivers/staging/bcm/InterfaceMisc.h
index 1dfabdc..bce6869 100644
--- a/drivers/staging/bcm/InterfaceMisc.h
+++ b/drivers/staging/bcm/InterfaceMisc.h
@@ -2,13 +2,13 @@
#define __INTERFACE_MISC_H
INT
-InterfaceRDM(PS_INTERFACE_ADAPTER psIntfAdapter,
+InterfaceRDM(struct bcm_interface_adapter *psIntfAdapter,
UINT addr,
PVOID buff,
INT len);
INT
-InterfaceWRM(PS_INTERFACE_ADAPTER psIntfAdapter,
+InterfaceWRM(struct bcm_interface_adapter *psIntfAdapter,
UINT addr,
PVOID buff,
INT len);
@@ -35,7 +35,7 @@
INT Bcm_clear_halt_of_endpoints(struct bcm_mini_adapter *Adapter);
-VOID Bcm_kill_all_URBs(PS_INTERFACE_ADAPTER psIntfAdapter);
+VOID Bcm_kill_all_URBs(struct bcm_interface_adapter *psIntfAdapter);
#define DISABLE_USB_ZERO_LEN_INT 0x0F011878
diff --git a/drivers/staging/bcm/InterfaceRx.c b/drivers/staging/bcm/InterfaceRx.c
index 8a9f90f..26f5bc7 100644
--- a/drivers/staging/bcm/InterfaceRx.c
+++ b/drivers/staging/bcm/InterfaceRx.c
@@ -12,10 +12,10 @@
}
-static PUSB_RCB
-GetBulkInRcb(PS_INTERFACE_ADAPTER psIntfAdapter)
+static struct bcm_usb_rcb *
+GetBulkInRcb(struct bcm_interface_adapter *psIntfAdapter)
{
- PUSB_RCB pRcb = NULL;
+ struct bcm_usb_rcb *pRcb = NULL;
UINT index = 0;
if((atomic_read(&psIntfAdapter->uNumRcbUsed) < MAXIMUM_USB_RCB) &&
@@ -43,8 +43,8 @@
UINT uiIndex=0;
int process_done = 1;
//int idleflag = 0 ;
- PUSB_RCB pRcb = (PUSB_RCB)urb->context;
- PS_INTERFACE_ADAPTER psIntfAdapter = pRcb->psIntfAdapter;
+ struct bcm_usb_rcb *pRcb = (struct bcm_usb_rcb *)urb->context;
+ struct bcm_interface_adapter *psIntfAdapter = pRcb->psIntfAdapter;
struct bcm_mini_adapter *Adapter = psIntfAdapter->psAdapter;
struct bcm_leader *pLeader = urb->transfer_buffer;
@@ -196,7 +196,7 @@
atomic_dec(&psIntfAdapter->uNumRcbUsed);
}
-static int ReceiveRcb(PS_INTERFACE_ADAPTER psIntfAdapter, PUSB_RCB pRcb)
+static int ReceiveRcb(struct bcm_interface_adapter *psIntfAdapter, struct bcm_usb_rcb *pRcb)
{
struct urb *urb = pRcb->urb;
int retval = 0;
@@ -240,10 +240,10 @@
Other - If an error occurred.
*/
-BOOLEAN InterfaceRx (PS_INTERFACE_ADAPTER psIntfAdapter)
+BOOLEAN InterfaceRx (struct bcm_interface_adapter *psIntfAdapter)
{
USHORT RxDescCount = NUM_RX_DESC - atomic_read(&psIntfAdapter->uNumRcbUsed);
- PUSB_RCB pRcb = NULL;
+ struct bcm_usb_rcb *pRcb = NULL;
// RxDescCount = psIntfAdapter->psAdapter->CurrNumRecvDescs -
// psIntfAdapter->psAdapter->PrevNumRecvDescs;
diff --git a/drivers/staging/bcm/InterfaceRx.h b/drivers/staging/bcm/InterfaceRx.h
index 96e81a1..424645e 100644
--- a/drivers/staging/bcm/InterfaceRx.h
+++ b/drivers/staging/bcm/InterfaceRx.h
@@ -1,7 +1,7 @@
#ifndef _INTERFACE_RX_H
#define _INTERFACE_RX_H
-BOOLEAN InterfaceRx(PS_INTERFACE_ADAPTER Adapter);
+BOOLEAN InterfaceRx(struct bcm_interface_adapter *Adapter);
#endif
diff --git a/drivers/staging/bcm/InterfaceTx.c b/drivers/staging/bcm/InterfaceTx.c
index 7e2b53b..b8c7855 100644
--- a/drivers/staging/bcm/InterfaceTx.c
+++ b/drivers/staging/bcm/InterfaceTx.c
@@ -3,8 +3,8 @@
/*this is transmit call-back(BULK OUT)*/
static void write_bulk_callback(struct urb *urb/*, struct pt_regs *regs*/)
{
- PUSB_TCB pTcb= (PUSB_TCB)urb->context;
- PS_INTERFACE_ADAPTER psIntfAdapter = pTcb->psIntfAdapter;
+ struct bcm_usb_tcb *pTcb= (struct bcm_usb_tcb *)urb->context;
+ struct bcm_interface_adapter *psIntfAdapter = pTcb->psIntfAdapter;
struct bcm_link_request *pControlMsg = (struct bcm_link_request *)urb->transfer_buffer;
struct bcm_mini_adapter *psAdapter = psIntfAdapter->psAdapter ;
BOOLEAN bpowerDownMsg = FALSE ;
@@ -107,9 +107,9 @@
}
-static PUSB_TCB GetBulkOutTcb(PS_INTERFACE_ADAPTER psIntfAdapter)
+static struct bcm_usb_tcb *GetBulkOutTcb(struct bcm_interface_adapter *psIntfAdapter)
{
- PUSB_TCB pTcb = NULL;
+ struct bcm_usb_tcb *pTcb = NULL;
UINT index = 0;
if((atomic_read(&psIntfAdapter->uNumTcbUsed) < MAXIMUM_USB_TCB) &&
@@ -128,7 +128,7 @@
return pTcb;
}
-static int TransmitTcb(PS_INTERFACE_ADAPTER psIntfAdapter, PUSB_TCB pTcb, PVOID data, int len)
+static int TransmitTcb(struct bcm_interface_adapter *psIntfAdapter, struct bcm_usb_tcb *pTcb, PVOID data, int len)
{
struct urb *urb = pTcb->urb;
@@ -182,9 +182,9 @@
int InterfaceTransmitPacket(PVOID arg, PVOID data, UINT len)
{
- PUSB_TCB pTcb= NULL;
+ struct bcm_usb_tcb *pTcb= NULL;
- PS_INTERFACE_ADAPTER psIntfAdapter = (PS_INTERFACE_ADAPTER)arg;
+ struct bcm_interface_adapter *psIntfAdapter = (struct bcm_interface_adapter *)arg;
pTcb= GetBulkOutTcb(psIntfAdapter);
if(pTcb == NULL)
{
diff --git a/drivers/staging/bcm/Ioctl.h b/drivers/staging/bcm/Ioctl.h
index f859cf1..8c70af9 100644
--- a/drivers/staging/bcm/Ioctl.h
+++ b/drivers/staging/bcm/Ioctl.h
@@ -1,247 +1,136 @@
#ifndef _IOCTL_H_
#define _IOCTL_H_
-typedef struct rdmbuffer
-{
- ULONG Register;
- ULONG Length;
-}__attribute__((packed)) RDM_BUFFER, *PRDM_BUFFER;
+struct bcm_rdm_buffer {
+ unsigned long Register;
+ unsigned long Length;
+} __packed;
+struct bcm_wrm_buffer {
+ unsigned long Register;
+ unsigned long Length;
+ unsigned char Data[4];
+} __packed;
-typedef struct wrmbuffer
-{
- ULONG Register;
- ULONG Length;
- UCHAR Data[4];
-}__attribute__((packed)) WRM_BUFFER, *PWRM_BUFFER;
-
-
-typedef struct ioctlbuffer
-{
+struct bcm_ioctl_buffer {
void __user *InputBuffer;
- ULONG InputLength;
+ unsigned long InputLength;
void __user *OutputBuffer;
- ULONG OutputLength;
-}__attribute__((packed)) IOCTL_BUFFER, *PIOCTL_BUFFER;
+ unsigned long OutputLength;
+} __packed;
-typedef struct stGPIOInfo
-{
- UINT uiGpioNumber ; /* valid numbers 0-15 */
- UINT uiGpioValue; /* 1 set ; 0 not set */
-}__attribute__((packed))GPIO_INFO,*PGPIO_INFO;
-typedef struct stUserThreadReq
-{
- //0->Inactivate LED thread.
- //1->Activate the LED thread
- UINT ThreadState;
-}__attribute__((packed))USER_THREAD_REQ,*PUSER_THREAD_REQ;
+struct bcm_gpio_info {
+ unsigned int uiGpioNumber; /* valid numbers 0-15 */
+ unsigned int uiGpioValue; /* 1 set ; 0 not set */
+} __packed;
+
+struct bcm_user_thread_req {
+ /* 0->Inactivate LED thread. */
+ /* 1->Activate the LED thread */
+ unsigned int ThreadState;
+} __packed;
+
#define LED_THREAD_ACTIVATION_REQ 1
-
-
-////********** ioctl codes ***********////
-
-#define BCM_IOCTL 'k'
-
-//1.Control code for CONTROL MESSAGES
-
-#define IOCTL_SEND_CONTROL_MESSAGE _IOW(BCM_IOCTL, 0x801,int)
-
-//2.Control code to write a particular value to a particular register
-#define IOCTL_BCM_REGISTER_WRITE _IOW(BCM_IOCTL, 0x802, int) //
-
-//3.
-#define IOCTL_BCM_REGISTER_READ _IOR(BCM_IOCTL, 0x803, int) //
-
-//4.Control code to write x number of bytes to common memory
-//starting from address y
-#define IOCTL_BCM_COMMON_MEMORY_WRITE _IOW(BCM_IOCTL, 0x804, int)//
-
-//5.Control code to write x number of bytes to common memory
-//starting from address y
-#define IOCTL_BCM_COMMON_MEMORY_READ _IOR(BCM_IOCTL, 0x805, int)//
-
-//6.Control code for CONTROL MESSAGES
-#define IOCTL_GET_CONTROL_MESSAGE _IOR(BCM_IOCTL, 0x806, int)//
-
-//7.Control code for FIRMWARE DOWNLOAD
-#define IOCTL_BCM_FIRMWARE_DOWNLOAD _IOW(BCM_IOCTL, 0x807, int)//
-
-#define IOCTL_BCM_SET_SEND_VCID _IOW(BCM_IOCTL, 0x808, int)
-
-//9.Control code for TRANSFER MODE SWITCHING
-#define IOCTL_BCM_SWITCH_TRANSFER_MODE _IOW(BCM_IOCTL, 0x809, int)
-//10.Control code for LINK UP
-#define IOCTL_LINK_REQ _IOW(BCM_IOCTL, 0x80A, int)
-
-//11.Control code for RSSI Level Request
-#define IOCTL_RSSI_LEVEL_REQ _IOW(BCM_IOCTL, 0x80B, int)
-//12.Control code for IDLE MODE CONTROL
-#define IOCTL_IDLE_REQ _IOW(BCM_IOCTL, 0x80C, int)
-//13.Control code for SS/BS info
-#define IOCTL_SS_INFO_REQ _IOW(BCM_IOCTL, 0x80D, int)
-
+#define BCM_IOCTL 'k'
+#define IOCTL_SEND_CONTROL_MESSAGE _IOW(BCM_IOCTL, 0x801, int)
+#define IOCTL_BCM_REGISTER_WRITE _IOW(BCM_IOCTL, 0x802, int)
+#define IOCTL_BCM_REGISTER_READ _IOR(BCM_IOCTL, 0x803, int)
+#define IOCTL_BCM_COMMON_MEMORY_WRITE _IOW(BCM_IOCTL, 0x804, int)
+#define IOCTL_BCM_COMMON_MEMORY_READ _IOR(BCM_IOCTL, 0x805, int)
+#define IOCTL_GET_CONTROL_MESSAGE _IOR(BCM_IOCTL, 0x806, int)
+#define IOCTL_BCM_FIRMWARE_DOWNLOAD _IOW(BCM_IOCTL, 0x807, int)
+#define IOCTL_BCM_SET_SEND_VCID _IOW(BCM_IOCTL, 0x808, int)
+#define IOCTL_BCM_SWITCH_TRANSFER_MODE _IOW(BCM_IOCTL, 0x809, int)
+#define IOCTL_LINK_REQ _IOW(BCM_IOCTL, 0x80A, int)
+#define IOCTL_RSSI_LEVEL_REQ _IOW(BCM_IOCTL, 0x80B, int)
+#define IOCTL_IDLE_REQ _IOW(BCM_IOCTL, 0x80C, int)
+#define IOCTL_SS_INFO_REQ _IOW(BCM_IOCTL, 0x80D, int)
#define IOCTL_GET_STATISTICS_POINTER _IOW(BCM_IOCTL, 0x80E, int)
-
-#define IOCTL_CM_REQUEST _IOW(BCM_IOCTL, 0x80F, int)
-
-#define IOCTL_INIT_PARAM_REQ _IOW(BCM_IOCTL, 0x810, int)
-
-#define IOCTL_MAC_ADDR_REQ _IOW(BCM_IOCTL, 0x811, int)
-
-#define IOCTL_MAC_ADDR_RESP _IOWR(BCM_IOCTL, 0x812, int)
-
-#define IOCTL_CLASSIFICATION_RULE _IOW(BCM_IOCTL, 0x813, char)
-
+#define IOCTL_CM_REQUEST _IOW(BCM_IOCTL, 0x80F, int)
+#define IOCTL_INIT_PARAM_REQ _IOW(BCM_IOCTL, 0x810, int)
+#define IOCTL_MAC_ADDR_REQ _IOW(BCM_IOCTL, 0x811, int)
+#define IOCTL_MAC_ADDR_RESP _IOWR(BCM_IOCTL, 0x812, int)
+#define IOCTL_CLASSIFICATION_RULE _IOW(BCM_IOCTL, 0x813, char)
#define IOCTL_CLOSE_NOTIFICATION _IO(BCM_IOCTL, 0x814)
-
-#define IOCTL_LINK_UP _IO(BCM_IOCTL, 0x815)
-
-#define IOCTL_LINK_DOWN _IO(BCM_IOCTL, 0x816, IOCTL_BUFFER)
-
-#define IOCTL_CHIP_RESET _IO(BCM_IOCTL, 0x816)
-
+#define IOCTL_LINK_UP _IO(BCM_IOCTL, 0x815)
+#define IOCTL_LINK_DOWN _IO(BCM_IOCTL, 0x816, struct bcm_ioctl_buffer)
+#define IOCTL_CHIP_RESET _IO(BCM_IOCTL, 0x816)
#define IOCTL_CINR_LEVEL_REQ _IOW(BCM_IOCTL, 0x817, char)
-
-#define IOCTL_WTM_CONTROL_REQ _IOW(BCM_IOCTL, 0x817,char)
-
+#define IOCTL_WTM_CONTROL_REQ _IOW(BCM_IOCTL, 0x817, char)
#define IOCTL_BE_BUCKET_SIZE _IOW(BCM_IOCTL, 0x818, unsigned long)
-
#define IOCTL_RTPS_BUCKET_SIZE _IOW(BCM_IOCTL, 0x819, unsigned long)
-
-#define IOCTL_QOS_THRESHOLD _IOW(BCM_IOCTL, 0x820, unsigned long)
-
-#define IOCTL_DUMP_PACKET_INFO _IO(BCM_IOCTL, 0x821)
-
-#define IOCTL_GET_PACK_INFO _IOR(BCM_IOCTL, 0x823, int)
-
+#define IOCTL_QOS_THRESHOLD _IOW(BCM_IOCTL, 0x820, unsigned long)
+#define IOCTL_DUMP_PACKET_INFO _IO(BCM_IOCTL, 0x821)
+#define IOCTL_GET_PACK_INFO _IOR(BCM_IOCTL, 0x823, int)
#define IOCTL_BCM_GET_DRIVER_VERSION _IOR(BCM_IOCTL, 0x829, int)
-
-#define IOCTL_BCM_GET_CURRENT_STATUS _IOW(BCM_IOCTL, 0x828, int)
-
-#define IOCTL_BCM_GPIO_SET_REQUEST _IOW(BCM_IOCTL, 0x82A, int)
-
-#define IOCTL_BCM_GPIO_STATUS_REQUEST _IOW(BCM_IOCTL, 0x82b, int)
-
-#define IOCTL_BCM_GET_DSX_INDICATION _IOR(BCM_IOCTL, 0x854, int)
-
-#define IOCTL_BCM_BUFFER_DOWNLOAD_START _IOW(BCM_IOCTL, 0x855, int)
-
-#define IOCTL_BCM_BUFFER_DOWNLOAD _IOW(BCM_IOCTL, 0x856, int)
-
-#define IOCTL_BCM_BUFFER_DOWNLOAD_STOP _IOW(BCM_IOCTL, 0x857, int)
-
-#define IOCTL_BCM_REGISTER_WRITE_PRIVATE _IOW(BCM_IOCTL, 0x826, char)
-
+#define IOCTL_BCM_GET_CURRENT_STATUS _IOW(BCM_IOCTL, 0x828, int)
+#define IOCTL_BCM_GPIO_SET_REQUEST _IOW(BCM_IOCTL, 0x82A, int)
+#define IOCTL_BCM_GPIO_STATUS_REQUEST _IOW(BCM_IOCTL, 0x82b, int)
+#define IOCTL_BCM_GET_DSX_INDICATION _IOR(BCM_IOCTL, 0x854, int)
+#define IOCTL_BCM_BUFFER_DOWNLOAD_START _IOW(BCM_IOCTL, 0x855, int)
+#define IOCTL_BCM_BUFFER_DOWNLOAD _IOW(BCM_IOCTL, 0x856, int)
+#define IOCTL_BCM_BUFFER_DOWNLOAD_STOP _IOW(BCM_IOCTL, 0x857, int)
+#define IOCTL_BCM_REGISTER_WRITE_PRIVATE _IOW(BCM_IOCTL, 0x826, char)
#define IOCTL_BCM_REGISTER_READ_PRIVATE _IOW(BCM_IOCTL, 0x827, char)
-
-#define IOCTL_BCM_SET_DEBUG _IOW(BCM_IOCTL, 0x824, IOCTL_BUFFER)
-
-#define IOCTL_BCM_EEPROM_REGISTER_WRITE _IOW(BCM_IOCTL, 0x858, int)
-
-#define IOCTL_BCM_EEPROM_REGISTER_READ _IOR(BCM_IOCTL, 0x859, int)
-
+#define IOCTL_BCM_SET_DEBUG _IOW(BCM_IOCTL, 0x824, struct bcm_ioctl_buffer)
+#define IOCTL_BCM_EEPROM_REGISTER_WRITE _IOW(BCM_IOCTL, 0x858, int)
+#define IOCTL_BCM_EEPROM_REGISTER_READ _IOR(BCM_IOCTL, 0x859, int)
#define IOCTL_BCM_WAKE_UP_DEVICE_FROM_IDLE _IOR(BCM_IOCTL, 0x860, int)
-
-#define IOCTL_BCM_SET_MAC_TRACING _IOW(BCM_IOCTL, 0x82c, int)
-
-#define IOCTL_BCM_GET_HOST_MIBS _IOW(BCM_IOCTL, 0x853, int)
-
-#define IOCTL_BCM_NVM_READ _IOR(BCM_IOCTL, 0x861, int)
-
-#define IOCTL_BCM_NVM_WRITE _IOW(BCM_IOCTL, 0x862, int)
-
-#define IOCTL_BCM_GET_NVM_SIZE _IOR(BCM_IOCTL, 0x863, int)
-
-#define IOCTL_BCM_CAL_INIT _IOR(BCM_IOCTL, 0x864, int)
-
-#define IOCTL_BCM_BULK_WRM _IOW(BCM_IOCTL, 0x90B, int)
-
-#define IOCTL_BCM_FLASH2X_SECTION_READ _IOR(BCM_IOCTL, 0x865, int)
-
+#define IOCTL_BCM_SET_MAC_TRACING _IOW(BCM_IOCTL, 0x82c, int)
+#define IOCTL_BCM_GET_HOST_MIBS _IOW(BCM_IOCTL, 0x853, int)
+#define IOCTL_BCM_NVM_READ _IOR(BCM_IOCTL, 0x861, int)
+#define IOCTL_BCM_NVM_WRITE _IOW(BCM_IOCTL, 0x862, int)
+#define IOCTL_BCM_GET_NVM_SIZE _IOR(BCM_IOCTL, 0x863, int)
+#define IOCTL_BCM_CAL_INIT _IOR(BCM_IOCTL, 0x864, int)
+#define IOCTL_BCM_BULK_WRM _IOW(BCM_IOCTL, 0x90B, int)
+#define IOCTL_BCM_FLASH2X_SECTION_READ _IOR(BCM_IOCTL, 0x865, int)
#define IOCTL_BCM_FLASH2X_SECTION_WRITE _IOW(BCM_IOCTL, 0x866, int)
+#define IOCTL_BCM_GET_FLASH2X_SECTION_BITMAP _IOR(BCM_IOCTL, 0x867, int)
+#define IOCTL_BCM_SET_ACTIVE_SECTION _IOW(BCM_IOCTL, 0x868, int)
+#define IOCTL_BCM_IDENTIFY_ACTIVE_SECTION _IO(BCM_IOCTL, 0x869)
+#define IOCTL_BCM_COPY_SECTION _IOW(BCM_IOCTL, 0x870, int)
+#define IOCTL_BCM_GET_FLASH_CS_INFO _IOR(BCM_IOCTL, 0x871, int)
+#define IOCTL_BCM_SELECT_DSD _IOW(BCM_IOCTL, 0x872, int)
+#define IOCTL_BCM_NVM_RAW_READ _IOR(BCM_IOCTL, 0x875, int)
+#define IOCTL_BCM_CNTRLMSG_MASK _IOW(BCM_IOCTL, 0x874, int)
+#define IOCTL_BCM_GET_DEVICE_DRIVER_INFO _IOR(BCM_IOCTL, 0x877, int)
+#define IOCTL_BCM_TIME_SINCE_NET_ENTRY _IOR(BCM_IOCTL, 0x876, int)
+#define BCM_LED_THREAD_STATE_CHANGE_REQ _IOW(BCM_IOCTL, 0x878, int)
+#define IOCTL_BCM_GPIO_MULTI_REQUEST _IOW(BCM_IOCTL, 0x82D, struct bcm_ioctl_buffer)
+#define IOCTL_BCM_GPIO_MODE_REQUEST _IOW(BCM_IOCTL, 0x82E, struct bcm_ioctl_buffer)
-#define IOCTL_BCM_GET_FLASH2X_SECTION_BITMAP _IOR(BCM_IOCTL,0x867, int)
+enum bcm_interface_type {
+ BCM_MII,
+ BCM_CARDBUS,
+ BCM_USB,
+ BCM_SDIO,
+ BCM_PCMCIA
+};
-#define IOCTL_BCM_SET_ACTIVE_SECTION _IOW(BCM_IOCTL,0x868, int)
+struct bcm_driver_info {
+ NVM_TYPE u32NVMType;
+ unsigned int MaxRDMBufferSize;
+ enum bcm_interface_type u32InterfaceType;
+ unsigned int u32DSDStartOffset;
+ unsigned int u32RxAlignmentCorrection;
+ unsigned int u32Reserved[10];
+};
-#define IOCTL_BCM_IDENTIFY_ACTIVE_SECTION _IO(BCM_IOCTL,0x869)
-
-#define IOCTL_BCM_COPY_SECTION _IOW(BCM_IOCTL, 0x870,int)
-
-#define IOCTL_BCM_GET_FLASH_CS_INFO _IOR(BCM_IOCTL, 0x871, int)
-
-#define IOCTL_BCM_SELECT_DSD _IOW(BCM_IOCTL, 0x872, int)
-
-#define IOCTL_BCM_NVM_RAW_READ _IOR(BCM_IOCTL, 0x875, int)
-
-#define IOCTL_BCM_CNTRLMSG_MASK _IOW(BCM_IOCTL, 0x874, int)
-
-#define IOCTL_BCM_GET_DEVICE_DRIVER_INFO _IOR(BCM_IOCTL, 0x877, int)
-
-#define IOCTL_BCM_TIME_SINCE_NET_ENTRY _IOR(BCM_IOCTL, 0x876, int)
-
-#define BCM_LED_THREAD_STATE_CHANGE_REQ _IOW(BCM_IOCTL, 0x878, int)
-
-#define IOCTL_BCM_GPIO_MULTI_REQUEST _IOW(BCM_IOCTL, 0x82D, IOCTL_BUFFER)
-#define IOCTL_BCM_GPIO_MODE_REQUEST _IOW(BCM_IOCTL, 0x82E, IOCTL_BUFFER)
-
-
-
-typedef enum _BCM_INTERFACE_TYPE
-{
- BCM_MII,
- BCM_CARDBUS,
- BCM_USB,
- BCM_SDIO,
- BCM_PCMCIA
-}BCM_INTERFACE_TYPE;
-
-typedef struct _DEVICE_DRIVER_INFO
-{
- NVM_TYPE u32NVMType;
- UINT MaxRDMBufferSize;
- BCM_INTERFACE_TYPE u32InterfaceType;
- UINT u32DSDStartOffset;
- UINT u32RxAlignmentCorrection;
- UINT u32Reserved[10];
-} DEVICE_DRIVER_INFO;
-
-typedef struct _NVM_READWRITE
-{
-
+struct bcm_nvm_readwrite {
void __user *pBuffer;
-// Data to be written from|read to. Memory should be allocated by the caller.
-
uint32_t uiOffset;
-// offset at which data should be written to or read from.
+ uint32_t uiNumBytes;
+ bool bVerify;
+};
- uint32_t uiNumBytes;
-// No. of bytes to be written or read.
+struct bcm_bulk_wrm_buffer {
+ unsigned long Register;
+ unsigned long SwapEndian;
+ unsigned long Values[1];
+};
- bool bVerify;
-// Applicable only for write. If set verification of written data will be done.
-
-} NVM_READWRITE,*PNVM_READWRITE;
-typedef struct bulkwrmbuffer
-{
- ULONG Register;
- ULONG SwapEndian;
- ULONG Values[1];
-
-}BULKWRM_BUFFER,*PBULKWRM_BUFFER;
-
-
-/***********Structure used for FlashMap2.x *******************************/
-
-/*
-* These are Sction present inside the Flash.
-* There is sectional RD/WR for flash Map 2.x.
-* hence these section will be used in read/write API.
-*/
-
-typedef enum _FLASH2X_SECTION_VAL
-{
- NO_SECTION_VAL = 0, //no section is chosen when absolute offset is given for RD/WR
+enum bcm_flash2x_section_val {
+ NO_SECTION_VAL = 0, /* no section is chosen when absolute offset is given for RD/WR */
ISO_IMAGE1,
ISO_IMAGE2,
DSD0,
@@ -257,104 +146,81 @@
ISO_IMAGE2_PART2,
ISO_IMAGE2_PART3,
TOTAL_SECTIONS
-}FLASH2X_SECTION_VAL;
+};
/*
-* Structure used for READ/WRITE Flash Map2.x
-*/
-typedef struct _FLASH2X_READWRITE
-{
-
- FLASH2X_SECTION_VAL Section; //which section has to be read/written
- B_UINT32 offset; //Offset within Section.
- B_UINT32 numOfBytes; //NOB from the offset
- B_UINT32 bVerify;
- void __user *pDataBuff; //Buffer for reading/writing
-
-}FLASH2X_READWRITE, *PFLASH2X_READWRITE;
-/*
-* This structure is used for coping one section to other.
-* there are two ways to copy one section to other.
-* it NOB =0, complete section will be copied on to other.
-* if NOB !=0, only NOB will be copied from the given offset.
-*/
-
-typedef struct _FLASH2X_COPY_SECTION
-{
- //Src Section from which Data has to be copied to DstSection
- FLASH2X_SECTION_VAL SrcSection;
-
- //Destination Section from where Data has to be coppied.
- FLASH2X_SECTION_VAL DstSection;
-
- //Offset within Section. if NOB =0 it will be ignored and data will be coped from offset 0.
- B_UINT32 offset;
-
- //NOB from the offset. if NOB = 0 complete src section will be copied to Destination section.
- B_UINT32 numOfBytes;
-} FLASH2X_COPY_SECTION, *PFLASH2X_COPY_SECTION;
-
-
-typedef enum _SECTION_TYPE
-{
- ISO = 0,
- VSA = 1,
- DSD = 2
-} SECTION_TYPE, *PSECTION_TYPE;
+ * Structure used for READ/WRITE Flash Map2.x
+ */
+struct bcm_flash2x_readwrite {
+ enum bcm_flash2x_section_val Section; /* which section has to be read/written */
+ u32 offset; /* Offset within Section. */
+ u32 numOfBytes; /* NOB from the offset */
+ u32 bVerify;
+ void __user *pDataBuff; /* Buffer for reading/writing */
+};
/*
-* This section provide the complete bitmap of the Flash.
-* using this map lib/APP will isssue read/write command.
- Fields are defined as :
- Bit [0] = section is present //1:present, 0: Not present
-* Bit [1] = section is valid //1: valid, 0: not valid
-* Bit [2] = Section is R/W //0: RW, 1: RO
-* Bit [3] = Section is Active or not 1 means Active, 0->inactive
-* Bit [7...3] = Reserved
-*/
+ * This structure is used for coping one section to other.
+ * there are two ways to copy one section to other.
+ * it NOB =0, complete section will be copied on to other.
+ * if NOB !=0, only NOB will be copied from the given offset.
+ */
-typedef struct _FLASH2X_BITMAP
-{
- UCHAR ISO_IMAGE1;
- UCHAR ISO_IMAGE2;
- UCHAR DSD0;
- UCHAR DSD1;
- UCHAR DSD2;
- UCHAR VSA0;
- UCHAR VSA1;
- UCHAR VSA2;
- UCHAR SCSI;
- UCHAR CONTROL_SECTION;
- //Reserved for future use
- UCHAR Reserved0;
- UCHAR Reserved1;
- UCHAR Reserved2;
-}FLASH2X_BITMAP, *PFLASH2X_BITMAP;
+struct bcm_flash2x_copy_section {
+ enum bcm_flash2x_section_val SrcSection;
+ enum bcm_flash2x_section_val DstSection;
+ u32 offset;
+ u32 numOfBytes;
+};
-//for net entry time check
-typedef struct _ST_TIME_ELAPSED_
-{
- ULONG64 ul64TimeElapsedSinceNetEntry;
- UINT32 uiReserved[4]; //By chance if required for future proofing
-}ST_TIME_ELAPSED,*PST_TIME_ELAPSED;
+/*
+ * This section provide the complete bitmap of the Flash.
+ * using this map lib/APP will isssue read/write command.
+ * Fields are defined as :
+ * Bit [0] = section is present //1:present, 0: Not present
+ * Bit [1] = section is valid //1: valid, 0: not valid
+ * Bit [2] = Section is R/W //0: RW, 1: RO
+ * Bit [3] = Section is Active or not 1 means Active, 0->inactive
+ * Bit [7...3] = Reserved
+ */
+
+struct bcm_flash2x_bitmap {
+ unsigned char ISO_IMAGE1;
+ unsigned char ISO_IMAGE2;
+ unsigned char DSD0;
+ unsigned char DSD1;
+ unsigned char DSD2;
+ unsigned char VSA0;
+ unsigned char VSA1;
+ unsigned char VSA2;
+ unsigned char SCSI;
+ unsigned char CONTROL_SECTION;
+ /* Reserved for future use */
+ unsigned char Reserved0;
+ unsigned char Reserved1;
+ unsigned char Reserved2;
+};
+
+struct bcm_time_elapsed {
+ unsigned long long ul64TimeElapsedSinceNetEntry;
+ u32 uiReserved[4];
+};
enum {
- WIMAX_IDX=0, /*To access WiMAX chip GPIO's for GPIO_MULTI_INFO or GPIO_MULTI_MODE*/
- HOST_IDX, /*To access Host chip GPIO's for GPIO_MULTI_INFO or GPIO_MULTI_MODE*/
- MAX_IDX
+ WIMAX_IDX = 0, /* To access WiMAX chip GPIO's for GPIO_MULTI_INFO or GPIO_MULTI_MODE */
+ HOST_IDX, /* To access Host chip GPIO's for GPIO_MULTI_INFO or GPIO_MULTI_MODE */
+ MAX_IDX
};
-typedef struct stGPIOMultiInfo
-{
- UINT uiGPIOCommand; /* 1 for set and 0 for get*/
- UINT uiGPIOMask; /* set the correspondig bit to 1 to access GPIO*/
- UINT uiGPIOValue; /* 0 or 1; value to be set when command is 1.*/
-}__attribute__((packed))GPIO_MULTI_INFO , *PGPIO_MULTI_INFO;
-typedef struct stGPIOMultiMode
-{
- UINT uiGPIOMode; /* 1 for OUT mode, 0 for IN mode*/
- UINT uiGPIOMask; /* GPIO mask to set mode*/
-}__attribute__((packed))GPIO_MULTI_MODE, *PGPIO_MULTI_MODE;
+struct bcm_gpio_multi_info {
+ unsigned int uiGPIOCommand; /* 1 for set and 0 for get */
+ unsigned int uiGPIOMask; /* set the correspondig bit to 1 to access GPIO */
+ unsigned int uiGPIOValue; /* 0 or 1; value to be set when command is 1. */
+} __packed;
+struct bcm_gpio_multi_mode {
+ unsigned int uiGPIOMode; /* 1 for OUT mode, 0 for IN mode */
+ unsigned int uiGPIOMask; /* GPIO mask to set mode */
+} __packed;
#endif
diff --git a/drivers/staging/bcm/LeakyBucket.c b/drivers/staging/bcm/LeakyBucket.c
index 6e8a327..877cf0b 100644
--- a/drivers/staging/bcm/LeakyBucket.c
+++ b/drivers/staging/bcm/LeakyBucket.c
@@ -21,10 +21,12 @@
INT i = 0;
struct timeval tv;
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_TX, TOKEN_COUNTS, DBG_LVL_ALL, "=====>\n");
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, TOKEN_COUNTS, DBG_LVL_ALL,
+ "=====>\n");
if(NULL == Adapter)
{
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_TX, TOKEN_COUNTS, DBG_LVL_ALL, "Adapter found NULL!\n");
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, TOKEN_COUNTS,
+ DBG_LVL_ALL, "Adapter found NULL!\n");
return;
}
diff --git a/drivers/staging/bcm/Misc.c b/drivers/staging/bcm/Misc.c
index f13a958..c92078e 100644
--- a/drivers/staging/bcm/Misc.c
+++ b/drivers/staging/bcm/Misc.c
@@ -1,14 +1,14 @@
#include "headers.h"
static int BcmFileDownload(struct bcm_mini_adapter *Adapter, const char *path, unsigned int loc);
-static VOID doPowerAutoCorrection(struct bcm_mini_adapter *psAdapter);
+static void doPowerAutoCorrection(struct bcm_mini_adapter *psAdapter);
static void HandleShutDownModeRequest(struct bcm_mini_adapter *Adapter, PUCHAR pucBuffer);
static int bcm_parse_target_params(struct bcm_mini_adapter *Adapter);
static void beceem_protocol_reset(struct bcm_mini_adapter *Adapter);
-static VOID default_wimax_protocol_initialize(struct bcm_mini_adapter *Adapter)
+static void default_wimax_protocol_initialize(struct bcm_mini_adapter *Adapter)
{
- UINT uiLoopIndex;
+ unsigned int uiLoopIndex;
for (uiLoopIndex = 0; uiLoopIndex < NO_OF_QUEUES-1; uiLoopIndex++) {
Adapter->PackInfo[uiLoopIndex].uiThreshold = TX_PACKET_THRESHOLD;
@@ -24,10 +24,10 @@
return;
}
-INT InitAdapter(struct bcm_mini_adapter *psAdapter)
+int InitAdapter(struct bcm_mini_adapter *psAdapter)
{
int i = 0;
- INT Status = STATUS_SUCCESS;
+ int Status = STATUS_SUCCESS;
BCM_DEBUG_PRINT(psAdapter, DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL, "Initialising Adapter = %p", psAdapter);
if (psAdapter == NULL) {
@@ -93,7 +93,7 @@
return STATUS_SUCCESS;
}
-VOID AdapterFree(struct bcm_mini_adapter *Adapter)
+void AdapterFree(struct bcm_mini_adapter *Adapter)
{
int count;
beceem_protocol_reset(Adapter);
@@ -216,12 +216,12 @@
* Logical Adapter
* Control Packet Buffer
*/
-INT CopyBufferToControlPacket(struct bcm_mini_adapter *Adapter, PVOID ioBuffer)
+int CopyBufferToControlPacket(struct bcm_mini_adapter *Adapter, void *ioBuffer)
{
struct bcm_leader *pLeader = NULL;
- INT Status = 0;
- unsigned char *ctrl_buff = NULL;
- UINT pktlen = 0;
+ int Status = 0;
+ unsigned char *ctrl_buff;
+ unsigned int pktlen = 0;
struct bcm_link_request *pLinkReq = NULL;
PUCHAR pucAddIndication = NULL;
@@ -253,7 +253,7 @@
return STATUS_FAILURE;
}
- if (TRUE == Adapter->bShutStatus) {
+ if (Adapter->bShutStatus == TRUE) {
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, TX_CONTROL, DBG_LVL_ALL, "SYNC UP IN SHUTDOWN..Device WakeUp\n");
if (Adapter->bTriedToWakeUpFromlowPowerMode == FALSE) {
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, TX_CONTROL, DBG_LVL_ALL, "Waking up for the First Time..\n");
@@ -275,7 +275,7 @@
}
}
- if (TRUE == Adapter->IdleMode) {
+ if (Adapter->IdleMode == TRUE) {
/* BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Device is in Idle mode ... hence\n"); */
if (pLeader->Status == LINK_UP_CONTROL_REQ || pLeader->Status == 0x80 ||
pLeader->Status == CM_CONTROL_NEWDSX_MULTICLASSIFIER_REQ) {
@@ -325,64 +325,66 @@
pktlen = pLeader->PLength;
ctrl_buff = (char *)Adapter->txctlpacket[atomic_read(&Adapter->index_wr_txcntrlpkt)%MAX_CNTRL_PKTS];
+ if (!ctrl_buff) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, TX_CONTROL, DBG_LVL_ALL, "mem allocation Failed");
+ return -ENOMEM;
+ }
+
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, TX_CONTROL, DBG_LVL_ALL, "Control packet to be taken =%d and address is =%pincoming address is =%p and packet len=%x",
atomic_read(&Adapter->index_wr_txcntrlpkt), ctrl_buff, ioBuffer, pktlen);
- if (ctrl_buff) {
- if (pLeader) {
- if ((pLeader->Status == 0x80) ||
- (pLeader->Status == CM_CONTROL_NEWDSX_MULTICLASSIFIER_REQ)) {
- /*
- * Restructure the DSX message to handle Multiple classifier Support
- * Write the Service Flow param Structures directly to the target
- * and embed the pointers in the DSX messages sent to target.
- */
- /* Lets store the current length of the control packet we are transmitting */
- pucAddIndication = (PUCHAR)ioBuffer + LEADER_SIZE;
- pktlen = pLeader->PLength;
- Status = StoreCmControlResponseMessage(Adapter, pucAddIndication, &pktlen);
- if (Status != 1) {
- ClearTargetDSXBuffer(Adapter, ((stLocalSFAddIndicationAlt *)pucAddIndication)->u16TID, FALSE);
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, TX_CONTROL, DBG_LVL_ALL, " Error Restoring The DSX Control Packet. Dsx Buffers on Target may not be Setup Properly ");
- return STATUS_FAILURE;
- }
- /*
- * update the leader to use the new length
- * The length of the control packet is length of message being sent + Leader length
- */
- pLeader->PLength = pktlen;
+
+ if (pLeader) {
+ if ((pLeader->Status == 0x80) ||
+ (pLeader->Status == CM_CONTROL_NEWDSX_MULTICLASSIFIER_REQ)) {
+ /*
+ * Restructure the DSX message to handle Multiple classifier Support
+ * Write the Service Flow param Structures directly to the target
+ * and embed the pointers in the DSX messages sent to target.
+ */
+ /* Lets store the current length of the control packet we are transmitting */
+ pucAddIndication = (PUCHAR)ioBuffer + LEADER_SIZE;
+ pktlen = pLeader->PLength;
+ Status = StoreCmControlResponseMessage(Adapter, pucAddIndication, &pktlen);
+ if (Status != 1) {
+ ClearTargetDSXBuffer(Adapter, ((struct bcm_add_indication_alt *)pucAddIndication)->u16TID, FALSE);
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, TX_CONTROL, DBG_LVL_ALL, " Error Restoring The DSX Control Packet. Dsx Buffers on Target may not be Setup Properly ");
+ return STATUS_FAILURE;
}
+ /*
+ * update the leader to use the new length
+ * The length of the control packet is length of message being sent + Leader length
+ */
+ pLeader->PLength = pktlen;
}
-
- if (pktlen + LEADER_SIZE > MAX_CNTL_PKT_SIZE)
- return -EINVAL;
-
- memset(ctrl_buff, 0, pktlen+LEADER_SIZE);
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, TX_CONTROL, DBG_LVL_ALL, "Copying the Control Packet Buffer with length=%d\n", pLeader->PLength);
- *(struct bcm_leader *)ctrl_buff = *pLeader;
- memcpy(ctrl_buff + LEADER_SIZE, ((PUCHAR)ioBuffer + LEADER_SIZE), pLeader->PLength);
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, TX_CONTROL, DBG_LVL_ALL, "Enqueuing the Control Packet");
-
- /* Update the statistics counters */
- spin_lock_bh(&Adapter->PackInfo[HiPriority].SFQueueLock);
- Adapter->PackInfo[HiPriority].uiCurrentBytesOnHost += pLeader->PLength;
- Adapter->PackInfo[HiPriority].uiCurrentPacketsOnHost++;
- atomic_inc(&Adapter->TotalPacketCount);
- spin_unlock_bh(&Adapter->PackInfo[HiPriority].SFQueueLock);
- Adapter->PackInfo[HiPriority].bValid = TRUE;
-
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, TX_CONTROL, DBG_LVL_ALL, "CurrBytesOnHost: %x bValid: %x",
- Adapter->PackInfo[HiPriority].uiCurrentBytesOnHost,
- Adapter->PackInfo[HiPriority].bValid);
- Status = STATUS_SUCCESS;
- /*Queue the packet for transmission */
- atomic_inc(&Adapter->index_wr_txcntrlpkt);
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, TX_CONTROL, DBG_LVL_ALL, "Calling transmit_packets");
- atomic_set(&Adapter->TxPktAvail, 1);
- wake_up(&Adapter->tx_packet_wait_queue);
- } else {
- Status = -ENOMEM;
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, TX_CONTROL, DBG_LVL_ALL, "mem allocation Failed");
}
+
+ if (pktlen + LEADER_SIZE > MAX_CNTL_PKT_SIZE)
+ return -EINVAL;
+
+ memset(ctrl_buff, 0, pktlen+LEADER_SIZE);
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, TX_CONTROL, DBG_LVL_ALL, "Copying the Control Packet Buffer with length=%d\n", pLeader->PLength);
+ *(struct bcm_leader *)ctrl_buff = *pLeader;
+ memcpy(ctrl_buff + LEADER_SIZE, ((PUCHAR)ioBuffer + LEADER_SIZE), pLeader->PLength);
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, TX_CONTROL, DBG_LVL_ALL, "Enqueuing the Control Packet");
+
+ /* Update the statistics counters */
+ spin_lock_bh(&Adapter->PackInfo[HiPriority].SFQueueLock);
+ Adapter->PackInfo[HiPriority].uiCurrentBytesOnHost += pLeader->PLength;
+ Adapter->PackInfo[HiPriority].uiCurrentPacketsOnHost++;
+ atomic_inc(&Adapter->TotalPacketCount);
+ spin_unlock_bh(&Adapter->PackInfo[HiPriority].SFQueueLock);
+ Adapter->PackInfo[HiPriority].bValid = TRUE;
+
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, TX_CONTROL, DBG_LVL_ALL, "CurrBytesOnHost: %x bValid: %x",
+ Adapter->PackInfo[HiPriority].uiCurrentBytesOnHost,
+ Adapter->PackInfo[HiPriority].bValid);
+ Status = STATUS_SUCCESS;
+ /*Queue the packet for transmission */
+ atomic_inc(&Adapter->index_wr_txcntrlpkt);
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, TX_CONTROL, DBG_LVL_ALL, "Calling transmit_packets");
+ atomic_set(&Adapter->TxPktAvail, 1);
+ wake_up(&Adapter->tx_packet_wait_queue);
+
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, TX_CONTROL, DBG_LVL_ALL, "<====");
return Status;
}
@@ -397,7 +399,7 @@
*
* Returns - None.
*******************************************************************/
-VOID LinkMessage(struct bcm_mini_adapter *Adapter)
+void LinkMessage(struct bcm_mini_adapter *Adapter)
{
struct bcm_link_request *pstLinkRequest = NULL;
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LINK_UP_MSG, DBG_LVL_ALL, "=====>");
@@ -448,11 +450,11 @@
*
* Returns - None.
************************************************************************/
-VOID StatisticsResponse(struct bcm_mini_adapter *Adapter, PVOID pvBuffer)
+void StatisticsResponse(struct bcm_mini_adapter *Adapter, void *pvBuffer)
{
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, DUMP_INFO, DBG_LVL_ALL, "%s====>", __func__);
Adapter->StatisticsPointer = ntohl(*(__be32 *)pvBuffer);
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, DUMP_INFO, DBG_LVL_ALL, "Stats at %x", (UINT)Adapter->StatisticsPointer);
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, DUMP_INFO, DBG_LVL_ALL, "Stats at %x", (unsigned int)Adapter->StatisticsPointer);
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, DUMP_INFO, DBG_LVL_ALL, "%s <====", __func__);
return;
}
@@ -467,7 +469,7 @@
*
* Returns - None.
***********************************************************************/
-VOID LinkControlResponseMessage(struct bcm_mini_adapter *Adapter, PUCHAR pucBuffer)
+void LinkControlResponseMessage(struct bcm_mini_adapter *Adapter, PUCHAR pucBuffer)
{
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_RX, RX_DPC, DBG_LVL_ALL, "=====>");
@@ -543,7 +545,7 @@
void SendIdleModeResponse(struct bcm_mini_adapter *Adapter)
{
- INT status = 0, NVMAccess = 0, lowPwrAbortMsg = 0;
+ int status = 0, NVMAccess = 0, lowPwrAbortMsg = 0;
struct timeval tv;
struct bcm_link_request stIdleResponse = {{0} };
memset(&tv, 0, sizeof(tv));
@@ -583,7 +585,7 @@
/* Wait for the LED to TURN OFF before sending ACK response */
if (Adapter->LEDInfo.led_thread_running & BCM_LED_THREAD_RUNNING_ACTIVELY) {
- INT iRetVal = 0;
+ int iRetVal = 0;
/* Wake the LED Thread with IDLEMODE_ENTER State */
Adapter->DriverState = LOWPOWER_MODE_ENTER;
@@ -609,7 +611,7 @@
up(&Adapter->rdmwrmsync);
/* Killing all URBS. */
if (Adapter->bDoSuspend == TRUE)
- Bcm_kill_all_URBs((PS_INTERFACE_ADAPTER)(Adapter->pvInterfaceAdapter));
+ Bcm_kill_all_URBs((struct bcm_interface_adapter *)(Adapter->pvInterfaceAdapter));
} else {
Adapter->bPreparingForLowPowerMode = FALSE;
}
@@ -625,7 +627,7 @@
if ((status != STATUS_SUCCESS)) {
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "fail to send the Idle mode Request\n");
Adapter->bPreparingForLowPowerMode = FALSE;
- StartInterruptUrb((PS_INTERFACE_ADAPTER)(Adapter->pvInterfaceAdapter));
+ StartInterruptUrb((struct bcm_interface_adapter *)(Adapter->pvInterfaceAdapter));
}
do_gettimeofday(&tv);
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_RX, RX_DPC, DBG_LVL_ALL, "IdleMode Msg submitter to Q :%ld ms", tv.tv_sec * 1000 + tv.tv_usec / 1000);
@@ -640,11 +642,11 @@
*
* Returns - None.
*******************************************************************/
-VOID DumpPackInfo(struct bcm_mini_adapter *Adapter)
+void DumpPackInfo(struct bcm_mini_adapter *Adapter)
{
- UINT uiLoopIndex = 0;
- UINT uiIndex = 0;
- UINT uiClsfrIndex = 0;
+ unsigned int uiLoopIndex = 0;
+ unsigned int uiIndex = 0;
+ unsigned int uiClsfrIndex = 0;
struct bcm_classifier_rule *pstClassifierEntry = NULL;
for (uiLoopIndex = 0; uiLoopIndex < NO_OF_QUEUES; uiLoopIndex++) {
@@ -776,11 +778,11 @@
{
int retval = STATUS_SUCCESS;
struct bcm_mini_adapter *Adapter = GET_BCM_ADAPTER(gblpnetdev);
- PS_INTERFACE_ADAPTER psIntfAdapter = NULL;
+ struct bcm_interface_adapter *psIntfAdapter = NULL;
unsigned int value = 0, uiResetValue = 0;
int bytes;
- psIntfAdapter = ((PS_INTERFACE_ADAPTER)(ps_adapter->pvInterfaceAdapter));
+ psIntfAdapter = ((struct bcm_interface_adapter *)(ps_adapter->pvInterfaceAdapter));
ps_adapter->bDDRInitDone = FALSE;
if (ps_adapter->chip_id >= T3LPB) {
@@ -920,7 +922,7 @@
int InitCardAndDownloadFirmware(struct bcm_mini_adapter *ps_adapter)
{
int status;
- UINT value = 0;
+ unsigned int value = 0;
/*
* Create the threads first and then download the
* Firm/DDR Settings..
@@ -1088,7 +1090,7 @@
void beceem_parse_target_struct(struct bcm_mini_adapter *Adapter)
{
- UINT uiHostDrvrCfg6 = 0, uiEEPROMFlag = 0;
+ unsigned int uiHostDrvrCfg6 = 0, uiEEPROMFlag = 0;
if (ntohl(Adapter->pstargetparams->m_u32PhyParameter2) & AUTO_SYNC_DISABLE) {
pr_info(DRV_NAME ": AutoSyncup is Disabled\n");
@@ -1144,9 +1146,9 @@
doPowerAutoCorrection(Adapter);
}
-static VOID doPowerAutoCorrection(struct bcm_mini_adapter *psAdapter)
+static void doPowerAutoCorrection(struct bcm_mini_adapter *psAdapter)
{
- UINT reporting_mode;
+ unsigned int reporting_mode;
reporting_mode = ntohl(psAdapter->pstargetparams->m_u32PowerSavingModeOptions) & 0x02;
psAdapter->bIsAutoCorrectEnabled = !((char)(psAdapter->ulPowerSaveMode >> 3) & 0x1);
@@ -1175,26 +1177,26 @@
}
}
-static void convertEndian(B_UINT8 rwFlag, PUINT puiBuffer, UINT uiByteCount)
+static void convertEndian(unsigned char rwFlag, unsigned int *puiBuffer, unsigned int uiByteCount)
{
- UINT uiIndex = 0;
+ unsigned int uiIndex = 0;
if (RWM_WRITE == rwFlag) {
- for (uiIndex = 0; uiIndex < (uiByteCount/sizeof(UINT)); uiIndex++)
+ for (uiIndex = 0; uiIndex < (uiByteCount/sizeof(unsigned int)); uiIndex++)
puiBuffer[uiIndex] = htonl(puiBuffer[uiIndex]);
} else {
- for (uiIndex = 0; uiIndex < (uiByteCount/sizeof(UINT)); uiIndex++)
+ for (uiIndex = 0; uiIndex < (uiByteCount/sizeof(unsigned int)); uiIndex++)
puiBuffer[uiIndex] = ntohl(puiBuffer[uiIndex]);
}
}
-int rdm(struct bcm_mini_adapter *Adapter, UINT uiAddress, PCHAR pucBuff, size_t sSize)
+int rdm(struct bcm_mini_adapter *Adapter, unsigned int uiAddress, PCHAR pucBuff, size_t sSize)
{
return Adapter->interface_rdm(Adapter->pvInterfaceAdapter,
uiAddress, pucBuff, sSize);
}
-int wrm(struct bcm_mini_adapter *Adapter, UINT uiAddress, PCHAR pucBuff, size_t sSize)
+int wrm(struct bcm_mini_adapter *Adapter, unsigned int uiAddress, PCHAR pucBuff, size_t sSize)
{
int iRetVal;
@@ -1203,25 +1205,25 @@
return iRetVal;
}
-int wrmalt(struct bcm_mini_adapter *Adapter, UINT uiAddress, PUINT pucBuff, size_t size)
+int wrmalt(struct bcm_mini_adapter *Adapter, unsigned int uiAddress, unsigned int *pucBuff, size_t size)
{
convertEndian(RWM_WRITE, pucBuff, size);
return wrm(Adapter, uiAddress, (PUCHAR)pucBuff, size);
}
-int rdmalt(struct bcm_mini_adapter *Adapter, UINT uiAddress, PUINT pucBuff, size_t size)
+int rdmalt(struct bcm_mini_adapter *Adapter, unsigned int uiAddress, unsigned int *pucBuff, size_t size)
{
- INT uiRetVal = 0;
+ int uiRetVal = 0;
uiRetVal = rdm(Adapter, uiAddress, (PUCHAR)pucBuff, size);
- convertEndian(RWM_READ, (PUINT)pucBuff, size);
+ convertEndian(RWM_READ, (unsigned int *)pucBuff, size);
return uiRetVal;
}
-int wrmWithLock(struct bcm_mini_adapter *Adapter, UINT uiAddress, PCHAR pucBuff, size_t sSize)
+int wrmWithLock(struct bcm_mini_adapter *Adapter, unsigned int uiAddress, PCHAR pucBuff, size_t sSize)
{
- INT status = STATUS_SUCCESS;
+ int status = STATUS_SUCCESS;
down(&Adapter->rdmwrmsync);
if ((Adapter->IdleMode == TRUE) ||
@@ -1238,7 +1240,7 @@
return status;
}
-int wrmaltWithLock(struct bcm_mini_adapter *Adapter, UINT uiAddress, PUINT pucBuff, size_t size)
+int wrmaltWithLock(struct bcm_mini_adapter *Adapter, unsigned int uiAddress, unsigned int *pucBuff, size_t size)
{
int iRetVal = STATUS_SUCCESS;
@@ -1258,9 +1260,9 @@
return iRetVal;
}
-int rdmaltWithLock(struct bcm_mini_adapter *Adapter, UINT uiAddress, PUINT pucBuff, size_t size)
+int rdmaltWithLock(struct bcm_mini_adapter *Adapter, unsigned int uiAddress, unsigned int *pucBuff, size_t size)
{
- INT uiRetVal = STATUS_SUCCESS;
+ int uiRetVal = STATUS_SUCCESS;
down(&Adapter->rdmwrmsync);
if ((Adapter->IdleMode == TRUE) ||
@@ -1277,13 +1279,13 @@
return uiRetVal;
}
-static VOID HandleShutDownModeWakeup(struct bcm_mini_adapter *Adapter)
+static void HandleShutDownModeWakeup(struct bcm_mini_adapter *Adapter)
{
int clear_abort_pattern = 0, Status = 0;
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, MP_SHUTDOWN, DBG_LVL_ALL, "====>\n");
/* target has woken up From Shut Down */
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, MP_SHUTDOWN, DBG_LVL_ALL, "Clearing Shut Down Software abort pattern\n");
- Status = wrmalt(Adapter, SW_ABORT_IDLEMODE_LOC, (PUINT)&clear_abort_pattern, sizeof(clear_abort_pattern));
+ Status = wrmalt(Adapter, SW_ABORT_IDLEMODE_LOC, (unsigned int *)&clear_abort_pattern, sizeof(clear_abort_pattern));
if (Status) {
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, MP_SHUTDOWN, DBG_LVL_ALL, "WRM to SW_ABORT_IDLEMODE_LOC failed with err:%d", Status);
return;
@@ -1306,11 +1308,11 @@
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, MP_SHUTDOWN, DBG_LVL_ALL, "<====\n");
}
-static VOID SendShutModeResponse(struct bcm_mini_adapter *Adapter)
+static void SendShutModeResponse(struct bcm_mini_adapter *Adapter)
{
struct bcm_link_request stShutdownResponse;
- UINT NVMAccess = 0, lowPwrAbortMsg = 0;
- UINT Status = 0;
+ unsigned int NVMAccess = 0, lowPwrAbortMsg = 0;
+ unsigned int Status = 0;
memset(&stShutdownResponse, 0, sizeof(struct bcm_link_request));
stShutdownResponse.Leader.Status = LINK_UP_CONTROL_REQ;
@@ -1346,7 +1348,7 @@
/* Wait for the LED to TURN OFF before sending ACK response */
if (Adapter->LEDInfo.led_thread_running & BCM_LED_THREAD_RUNNING_ACTIVELY) {
- INT iRetVal = 0;
+ int iRetVal = 0;
/* Wake the LED Thread with LOWPOWER_MODE_ENTER State */
Adapter->DriverState = LOWPOWER_MODE_ENTER;
@@ -1370,7 +1372,7 @@
up(&Adapter->rdmwrmsync);
/* Killing all URBS. */
if (Adapter->bDoSuspend == TRUE)
- Bcm_kill_all_URBs((PS_INTERFACE_ADAPTER)(Adapter->pvInterfaceAdapter));
+ Bcm_kill_all_URBs((struct bcm_interface_adapter *)(Adapter->pvInterfaceAdapter));
} else {
Adapter->bPreparingForLowPowerMode = FALSE;
}
@@ -1386,13 +1388,13 @@
if ((Status != STATUS_SUCCESS)) {
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, MP_SHUTDOWN, DBG_LVL_ALL, "fail to send the Idle mode Request\n");
Adapter->bPreparingForLowPowerMode = FALSE;
- StartInterruptUrb((PS_INTERFACE_ADAPTER)(Adapter->pvInterfaceAdapter));
+ StartInterruptUrb((struct bcm_interface_adapter *)(Adapter->pvInterfaceAdapter));
}
}
static void HandleShutDownModeRequest(struct bcm_mini_adapter *Adapter, PUCHAR pucBuffer)
{
- B_UINT32 uiResetValue = 0;
+ unsigned int uiResetValue = 0;
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, MP_SHUTDOWN, DBG_LVL_ALL, "====>\n");
@@ -1412,14 +1414,14 @@
}
SendShutModeResponse(Adapter);
- BCM_DEBUG_PRINT (Adapter, DBG_TYPE_OTHERS, MP_SHUTDOWN, DBG_LVL_ALL, "ShutDownModeResponse:Notification received: Sending the response(Ack/Nack)\n");
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, MP_SHUTDOWN, DBG_LVL_ALL, "ShutDownModeResponse:Notification received: Sending the response(Ack/Nack)\n");
}
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, MP_SHUTDOWN, DBG_LVL_ALL, "<====\n");
return;
}
-VOID ResetCounters(struct bcm_mini_adapter *Adapter)
+void ResetCounters(struct bcm_mini_adapter *Adapter)
{
beceem_protocol_reset(Adapter);
Adapter->CurrNumRecvDescs = 0;
@@ -1437,7 +1439,7 @@
struct bcm_classifier_rule *GetFragIPClsEntry(struct bcm_mini_adapter *Adapter, USHORT usIpIdentification, ULONG SrcIP)
{
- UINT uiIndex = 0;
+ unsigned int uiIndex = 0;
for (uiIndex = 0; uiIndex < MAX_FRAGMENTEDIP_CLASSIFICATION_ENTRIES; uiIndex++) {
if ((Adapter->astFragmentedPktClassifierTable[uiIndex].bUsed) &&
(Adapter->astFragmentedPktClassifierTable[uiIndex].usIpIdentification == usIpIdentification) &&
@@ -1451,7 +1453,7 @@
void AddFragIPClsEntry(struct bcm_mini_adapter *Adapter, struct bcm_fragmented_packet_info *psFragPktInfo)
{
- UINT uiIndex = 0;
+ unsigned int uiIndex = 0;
for (uiIndex = 0; uiIndex < MAX_FRAGMENTEDIP_CLASSIFICATION_ENTRIES; uiIndex++) {
if (!Adapter->astFragmentedPktClassifierTable[uiIndex].bUsed) {
memcpy(&Adapter->astFragmentedPktClassifierTable[uiIndex], psFragPktInfo, sizeof(struct bcm_fragmented_packet_info));
@@ -1462,7 +1464,7 @@
void DelFragIPClsEntry(struct bcm_mini_adapter *Adapter, USHORT usIpIdentification, ULONG SrcIp)
{
- UINT uiIndex = 0;
+ unsigned int uiIndex = 0;
for (uiIndex = 0; uiIndex < MAX_FRAGMENTEDIP_CLASSIFICATION_ENTRIES; uiIndex++) {
if ((Adapter->astFragmentedPktClassifierTable[uiIndex].bUsed) &&
(Adapter->astFragmentedPktClassifierTable[uiIndex].usIpIdentification == usIpIdentification) &&
@@ -1474,7 +1476,7 @@
void update_per_cid_rx(struct bcm_mini_adapter *Adapter)
{
- UINT qindex = 0;
+ unsigned int qindex = 0;
if ((jiffies - Adapter->liDrainCalculated) < XSECONDS)
return;
@@ -1498,14 +1500,14 @@
void update_per_sf_desc_cnts(struct bcm_mini_adapter *Adapter)
{
- INT iIndex = 0;
+ int iIndex = 0;
u32 uibuff[MAX_TARGET_DSX_BUFFERS];
int bytes;
if (!atomic_read(&Adapter->uiMBupdate))
return;
- bytes = rdmaltWithLock(Adapter, TARGET_SFID_TXDESC_MAP_LOC, (PUINT)uibuff, sizeof(UINT) * MAX_TARGET_DSX_BUFFERS);
+ bytes = rdmaltWithLock(Adapter, TARGET_SFID_TXDESC_MAP_LOC, (unsigned int *)uibuff, sizeof(unsigned int) * MAX_TARGET_DSX_BUFFERS);
if (bytes < 0) {
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "rdm failed\n");
return;
@@ -1522,7 +1524,7 @@
atomic_set(&Adapter->uiMBupdate, FALSE);
}
-void flush_queue(struct bcm_mini_adapter *Adapter, UINT iQIndex)
+void flush_queue(struct bcm_mini_adapter *Adapter, unsigned int iQIndex)
{
struct sk_buff *PacketToDrop = NULL;
struct net_device_stats *netstats = &Adapter->dev->stats;
@@ -1573,6 +1575,6 @@
for (i = 0; i < HiPriority; i++) {
/* resetting only the first size (S_MIBS_SERVICEFLOW_TABLE) for the SF. */
/* It is same between MIBs and SF. */
- memset(&Adapter->PackInfo[i].stMibsExtServiceFlowTable, 0, sizeof(S_MIBS_EXTSERVICEFLOW_PARAMETERS));
+ memset(&Adapter->PackInfo[i].stMibsExtServiceFlowTable, 0, sizeof(struct bcm_mibs_parameters));
}
}
diff --git a/drivers/staging/bcm/Prototypes.h b/drivers/staging/bcm/Prototypes.h
index 3ec8f80..90dbe0f 100644
--- a/drivers/staging/bcm/Prototypes.h
+++ b/drivers/staging/bcm/Prototypes.h
@@ -79,17 +79,17 @@
int wrm(struct bcm_mini_adapter *Adapter, UINT uiAddress, PCHAR pucBuff, size_t size);
-int wrmalt (struct bcm_mini_adapter *Adapter, UINT uiAddress, PUINT pucBuff, size_t sSize);
+int wrmalt (struct bcm_mini_adapter *Adapter, UINT uiAddress, unsigned int *pucBuff, size_t sSize);
-int rdmalt (struct bcm_mini_adapter *Adapter, UINT uiAddress, PUINT pucBuff, size_t sSize);
+int rdmalt (struct bcm_mini_adapter *Adapter, UINT uiAddress, unsigned int *pucBuff, size_t sSize);
int get_dsx_sf_data_to_application(struct bcm_mini_adapter *Adapter, UINT uiSFId, void __user * user_buffer);
void SendIdleModeResponse(struct bcm_mini_adapter *Adapter);
-int ProcessGetHostMibs(struct bcm_mini_adapter *Adapter, S_MIBS_HOST_STATS_MIBS *buf);
-void GetDroppedAppCntrlPktMibs(S_MIBS_HOST_STATS_MIBS *ioBuffer, struct bcm_tarang_data *pTarang);
+int ProcessGetHostMibs(struct bcm_mini_adapter *Adapter, struct bcm_host_stats_mibs *buf);
+void GetDroppedAppCntrlPktMibs(struct bcm_host_stats_mibs *ioBuffer, struct bcm_tarang_data *pTarang);
void beceem_parse_target_struct(struct bcm_mini_adapter *Adapter);
int bcm_ioctl_fw_download(struct bcm_mini_adapter *Adapter, struct bcm_firmware_info *psFwInfo);
@@ -161,14 +161,14 @@
INT BcmInitNVM(struct bcm_mini_adapter *Adapter);
INT BcmUpdateSectorSize(struct bcm_mini_adapter *Adapter,UINT uiSectorSize);
-BOOLEAN IsSectionExistInFlash(struct bcm_mini_adapter *Adapter, FLASH2X_SECTION_VAL section);
+BOOLEAN IsSectionExistInFlash(struct bcm_mini_adapter *Adapter, enum bcm_flash2x_section_val section);
-INT BcmGetFlash2xSectionalBitMap(struct bcm_mini_adapter *Adapter, PFLASH2X_BITMAP psFlash2xBitMap);
+INT BcmGetFlash2xSectionalBitMap(struct bcm_mini_adapter *Adapter, struct bcm_flash2x_bitmap *psFlash2xBitMap);
INT BcmFlash2xBulkWrite(
struct bcm_mini_adapter *Adapter,
PUINT pBuffer,
- FLASH2X_SECTION_VAL eFlashSectionVal,
+ enum bcm_flash2x_section_val eFlashSectionVal,
UINT uiOffset,
UINT uiNumBytes,
UINT bVerify);
@@ -176,24 +176,24 @@
INT BcmFlash2xBulkRead(
struct bcm_mini_adapter *Adapter,
PUINT pBuffer,
- FLASH2X_SECTION_VAL eFlashSectionVal,
+ enum bcm_flash2x_section_val eFlashSectionVal,
UINT uiOffsetWithinSectionVal,
UINT uiNumBytes);
-INT BcmGetSectionValStartOffset(struct bcm_mini_adapter *Adapter, FLASH2X_SECTION_VAL eFlashSectionVal);
+INT BcmGetSectionValStartOffset(struct bcm_mini_adapter *Adapter, enum bcm_flash2x_section_val eFlashSectionVal);
-INT BcmSetActiveSection(struct bcm_mini_adapter *Adapter, FLASH2X_SECTION_VAL eFlash2xSectVal);
+INT BcmSetActiveSection(struct bcm_mini_adapter *Adapter, enum bcm_flash2x_section_val eFlash2xSectVal);
INT BcmAllocFlashCSStructure(struct bcm_mini_adapter *psAdapter);
INT BcmDeAllocFlashCSStructure(struct bcm_mini_adapter *psAdapter);
-INT BcmCopyISO(struct bcm_mini_adapter *Adapter, FLASH2X_COPY_SECTION sCopySectStrut);
-INT BcmFlash2xCorruptSig(struct bcm_mini_adapter *Adapter, FLASH2X_SECTION_VAL eFlash2xSectionVal);
-INT BcmFlash2xWriteSig(struct bcm_mini_adapter *Adapter, FLASH2X_SECTION_VAL eFlashSectionVal);
-INT validateFlash2xReadWrite(struct bcm_mini_adapter *Adapter, PFLASH2X_READWRITE psFlash2xReadWrite);
+INT BcmCopyISO(struct bcm_mini_adapter *Adapter, struct bcm_flash2x_copy_section sCopySectStrut);
+INT BcmFlash2xCorruptSig(struct bcm_mini_adapter *Adapter, enum bcm_flash2x_section_val eFlash2xSectionVal);
+INT BcmFlash2xWriteSig(struct bcm_mini_adapter *Adapter, enum bcm_flash2x_section_val eFlashSectionVal);
+INT validateFlash2xReadWrite(struct bcm_mini_adapter *Adapter, struct bcm_flash2x_readwrite *psFlash2xReadWrite);
INT IsFlash2x(struct bcm_mini_adapter *Adapter);
INT BcmCopySection(struct bcm_mini_adapter *Adapter,
- FLASH2X_SECTION_VAL SrcSection,
- FLASH2X_SECTION_VAL DstSection,
+ enum bcm_flash2x_section_val SrcSection,
+ enum bcm_flash2x_section_val DstSection,
UINT offset,
UINT numOfBytes);
@@ -203,8 +203,8 @@
VOID OverrideServiceFlowParams(struct bcm_mini_adapter *Adapter,PUINT puiBuffer);
-int wrmaltWithLock (struct bcm_mini_adapter *Adapter, UINT uiAddress, PUINT pucBuff, size_t sSize);
-int rdmaltWithLock (struct bcm_mini_adapter *Adapter, UINT uiAddress, PUINT pucBuff, size_t sSize);
+int wrmaltWithLock (struct bcm_mini_adapter *Adapter, UINT uiAddress, unsigned int *pucBuff, size_t sSize);
+int rdmaltWithLock (struct bcm_mini_adapter *Adapter, UINT uiAddress, unsigned int *pucBuff, size_t sSize);
int wrmWithLock(struct bcm_mini_adapter *Adapter, UINT uiAddress, PCHAR pucBuff, size_t size);
INT buffDnldVerify(struct bcm_mini_adapter *Adapter, unsigned char *mappedbuffer, unsigned int u32FirmwareLength,
diff --git a/drivers/staging/bcm/Transmit.c b/drivers/staging/bcm/Transmit.c
index 27e8c89..f8dc3e2 100644
--- a/drivers/staging/bcm/Transmit.c
+++ b/drivers/staging/bcm/Transmit.c
@@ -205,7 +205,7 @@
if (Adapter->bEndPointHalted == TRUE) {
Bcm_clear_halt_of_endpoints(Adapter);
Adapter->bEndPointHalted = FALSE;
- StartInterruptUrb((PS_INTERFACE_ADAPTER)(Adapter->pvInterfaceAdapter));
+ StartInterruptUrb((struct bcm_interface_adapter *)(Adapter->pvInterfaceAdapter));
}
if (Adapter->LinkUpStatus && !Adapter->IdleMode) {
diff --git a/drivers/staging/bcm/cntrl_SignalingInterface.h b/drivers/staging/bcm/cntrl_SignalingInterface.h
index 990e809..8683c2d 100644
--- a/drivers/staging/bcm/cntrl_SignalingInterface.h
+++ b/drivers/staging/bcm/cntrl_SignalingInterface.h
@@ -36,91 +36,91 @@
struct bcm_packet_class_rules {
/* 16bit UserPriority Of The Service Flow */
- B_UINT16 u16UserPriority;
+ u16 u16UserPriority;
/* 16bit VLANID Of The Service Flow */
- B_UINT16 u16VLANID;
+ u16 u16VLANID;
/* 16bit Packet Classification RuleIndex Of The Service Flow */
- B_UINT16 u16PacketClassificationRuleIndex;
+ u16 u16PacketClassificationRuleIndex;
/* 8bit Classifier Rule Priority Of The Service Flow */
- B_UINT8 u8ClassifierRulePriority;
+ u8 u8ClassifierRulePriority;
/* Length of IP TypeOfService field */
- B_UINT8 u8IPTypeOfServiceLength;
+ u8 u8IPTypeOfServiceLength;
/* 3bytes IP TypeOfService */
- B_UINT8 u8IPTypeOfService[TYPE_OF_SERVICE_LENGTH];
+ u8 u8IPTypeOfService[TYPE_OF_SERVICE_LENGTH];
/* Protocol used in classification of Service Flow */
- B_UINT8 u8Protocol;
+ u8 u8Protocol;
/* Length of IP Masked Source Address */
- B_UINT8 u8IPMaskedSourceAddressLength;
+ u8 u8IPMaskedSourceAddressLength;
/* IP Masked Source Address used in classification for the Service Flow */
- B_UINT8 u8IPMaskedSourceAddress[IP_MASKED_SRC_ADDRESS_LENGTH];
+ u8 u8IPMaskedSourceAddress[IP_MASKED_SRC_ADDRESS_LENGTH];
/* Length of IP Destination Address */
- B_UINT8 u8IPDestinationAddressLength;
+ u8 u8IPDestinationAddressLength;
/* IP Destination Address used in classification for the Service Flow */
- B_UINT8 u8IPDestinationAddress[IP_MASKED_DEST_ADDRESS_LENGTH];
+ u8 u8IPDestinationAddress[IP_MASKED_DEST_ADDRESS_LENGTH];
/* Length of Protocol Source Port Range */
- B_UINT8 u8ProtocolSourcePortRangeLength;
+ u8 u8ProtocolSourcePortRangeLength;
/* Protocol Source Port Range used in the Service Flow */
- B_UINT8 u8ProtocolSourcePortRange[PROTOCOL_SRC_PORT_RANGE_LENGTH];
+ u8 u8ProtocolSourcePortRange[PROTOCOL_SRC_PORT_RANGE_LENGTH];
/* Length of Protocol Dest Port Range */
- B_UINT8 u8ProtocolDestPortRangeLength;
+ u8 u8ProtocolDestPortRangeLength;
/* Protocol Dest Port Range used in the Service Flow */
- B_UINT8 u8ProtocolDestPortRange[PROTOCOL_DEST_PORT_RANGE_LENGTH];
+ u8 u8ProtocolDestPortRange[PROTOCOL_DEST_PORT_RANGE_LENGTH];
/* Length of Ethernet Destination MAC Address */
- B_UINT8 u8EthernetDestMacAddressLength;
+ u8 u8EthernetDestMacAddressLength;
/* Ethernet Destination MAC Address used in classification of the Service Flow */
- B_UINT8 u8EthernetDestMacAddress[ETHERNET_DEST_MAC_ADDR_LENGTH];
+ u8 u8EthernetDestMacAddress[ETHERNET_DEST_MAC_ADDR_LENGTH];
/* Length of Ethernet Source MAC Address */
- B_UINT8 u8EthernetSourceMACAddressLength;
+ u8 u8EthernetSourceMACAddressLength;
/* Ethernet Source MAC Address used in classification of the Service Flow */
- B_UINT8 u8EthernetSourceMACAddress[ETHERNET_SRC_MAC_ADDR_LENGTH];
+ u8 u8EthernetSourceMACAddress[ETHERNET_SRC_MAC_ADDR_LENGTH];
/* Length of Ethertype */
- B_UINT8 u8EthertypeLength;
+ u8 u8EthertypeLength;
/* 3bytes Ethertype Of The Service Flow */
- B_UINT8 u8Ethertype[NUM_ETHERTYPE_BYTES];
+ u8 u8Ethertype[NUM_ETHERTYPE_BYTES];
/* 8bit Associated PHSI Of The Service Flow */
- B_UINT8 u8AssociatedPHSI;
+ u8 u8AssociatedPHSI;
/* Length of Vendor Specific Classifier Param length Of The Service Flow */
- B_UINT8 u8VendorSpecificClassifierParamLength;
+ u8 u8VendorSpecificClassifierParamLength;
/* Vendor Specific Classifier Param Of The Service Flow */
- B_UINT8 u8VendorSpecificClassifierParam[VENDOR_CLASSIFIER_PARAM_LENGTH];
+ u8 u8VendorSpecificClassifierParam[VENDOR_CLASSIFIER_PARAM_LENGTH];
/* Length Of IPv6 Flow Lable of the Service Flow */
- B_UINT8 u8IPv6FlowLableLength;
+ u8 u8IPv6FlowLableLength;
/* IPv6 Flow Lable Of The Service Flow */
- B_UINT8 u8IPv6FlowLable[NUM_IPV6_FLOWLABLE_BYTES];
+ u8 u8IPv6FlowLable[NUM_IPV6_FLOWLABLE_BYTES];
/* Action associated with the classifier rule */
- B_UINT8 u8ClassifierActionRule;
- B_UINT16 u16ValidityBitMap;
+ u8 u8ClassifierActionRule;
+ u16 u16ValidityBitMap;
};
struct bcm_phs_rules {
/* 8bit PHS Index Of The Service Flow */
- B_UINT8 u8PHSI;
+ u8 u8PHSI;
/* PHSF Length Of The Service Flow */
- B_UINT8 u8PHSFLength;
+ u8 u8PHSFLength;
/* String of bytes containing header information to be suppressed by the sending CS and reconstructed by the receiving CS */
- B_UINT8 u8PHSF[MAX_PHS_LENGTHS];
+ u8 u8PHSF[MAX_PHS_LENGTHS];
/* PHSM Length Of The Service Flow */
- B_UINT8 u8PHSMLength;
+ u8 u8PHSMLength;
/* PHS Mask for the SF */
- B_UINT8 u8PHSM[MAX_PHS_LENGTHS];
+ u8 u8PHSM[MAX_PHS_LENGTHS];
/* 8bit Total number of bytes to be suppressed for the Service Flow */
- B_UINT8 u8PHSS;
+ u8 u8PHSS;
/* 8bit Indicates whether or not Packet Header contents need to be verified prior to suppression */
- B_UINT8 u8PHSV;
+ u8 u8PHSV;
/* Vendor Specific PHS param Length Of The Service Flow */
- B_UINT8 u8VendorSpecificPHSParamsLength;
+ u8 u8VendorSpecificPHSParamsLength;
/* Vendor Specific PHS param Of The Service Flow */
- B_UINT8 u8VendorSpecificPHSParams[VENDOR_PHS_PARAM_LENGTH];
- B_UINT8 u8Padding[2];
+ u8 u8VendorSpecificPHSParams[VENDOR_PHS_PARAM_LENGTH];
+ u8 u8Padding[2];
};
struct bcm_convergence_types {
/* 8bit Phs Classfier Action Of The Service Flow */
- B_UINT8 u8ClassfierDSCAction;
+ u8 u8ClassfierDSCAction;
/* 8bit Phs DSC Action Of The Service Flow */
- B_UINT8 u8PhsDSCAction;
+ u8 u8PhsDSCAction;
/* 16bit Padding */
- B_UINT8 u8Padding[2];
+ u8 u8Padding[2];
/* Packet classification rules structure */
struct bcm_packet_class_rules cCPacketClassificationRule;
/* Payload header suppression rules structure */
@@ -129,118 +129,118 @@
struct bcm_connect_mgr_params {
/* 32bitSFID Of The Service Flow */
- B_UINT32 u32SFID;
+ u32 u32SFID;
/* 32bit Maximum Sustained Traffic Rate of the Service Flow */
- B_UINT32 u32MaxSustainedTrafficRate;
+ u32 u32MaxSustainedTrafficRate;
/* 32bit Maximum Traffic Burst allowed for the Service Flow */
- B_UINT32 u32MaxTrafficBurst;
+ u32 u32MaxTrafficBurst;
/* 32bit Minimum Reserved Traffic Rate of the Service Flow */
- B_UINT32 u32MinReservedTrafficRate;
+ u32 u32MinReservedTrafficRate;
/* 32bit Tolerated Jitter of the Service Flow */
- B_UINT32 u32ToleratedJitter;
+ u32 u32ToleratedJitter;
/* 32bit Maximum Latency of the Service Flow */
- B_UINT32 u32MaximumLatency;
+ u32 u32MaximumLatency;
/* 16bitCID Of The Service Flow */
- B_UINT16 u16CID;
+ u16 u16CID;
/* 16bit SAID on which the service flow being set up shall be mapped */
- B_UINT16 u16TargetSAID;
+ u16 u16TargetSAID;
/* 16bit ARQ window size negotiated */
- B_UINT16 u16ARQWindowSize;
+ u16 u16ARQWindowSize;
/* 16bit Total Tx delay incl sending, receiving & processing delays */
- B_UINT16 u16ARQRetryTxTimeOut;
+ u16 u16ARQRetryTxTimeOut;
/* 16bit Total Rx delay incl sending, receiving & processing delays */
- B_UINT16 u16ARQRetryRxTimeOut;
+ u16 u16ARQRetryRxTimeOut;
/* 16bit ARQ block lifetime */
- B_UINT16 u16ARQBlockLifeTime;
+ u16 u16ARQBlockLifeTime;
/* 16bit ARQ Sync loss timeout */
- B_UINT16 u16ARQSyncLossTimeOut;
+ u16 u16ARQSyncLossTimeOut;
/* 16bit ARQ Purge timeout */
- B_UINT16 u16ARQRxPurgeTimeOut;
+ u16 u16ARQRxPurgeTimeOut;
/* TODO::Remove this once we move to a new CORR2 driver
* brief Size of an ARQ block
*/
- B_UINT16 u16ARQBlockSize;
+ u16 u16ARQBlockSize;
/* #endif */
/* 16bit Nominal interval b/w consecutive SDU arrivals at MAC SAP */
- B_UINT16 u16SDUInterArrivalTime;
+ u16 u16SDUInterArrivalTime;
/* 16bit Specifies the time base for rate measurement */
- B_UINT16 u16TimeBase;
+ u16 u16TimeBase;
/* 16bit Interval b/w Successive Grant oppurtunities */
- B_UINT16 u16UnsolicitedGrantInterval;
+ u16 u16UnsolicitedGrantInterval;
/* 16bit Interval b/w Successive Polling grant oppurtunities */
- B_UINT16 u16UnsolicitedPollingInterval;
+ u16 u16UnsolicitedPollingInterval;
/* internal var to get the overhead */
- B_UINT16 u16MacOverhead;
+ u16 u16MacOverhead;
/* MBS contents Identifier */
- B_UINT16 u16MBSContentsID[MBS_CONTENTS_ID_LENGTH];
+ u16 u16MBSContentsID[MBS_CONTENTS_ID_LENGTH];
/* MBS contents Identifier length */
- B_UINT8 u8MBSContentsIDLength;
+ u8 u8MBSContentsIDLength;
/* ServiceClassName Length Of The Service Flow */
- B_UINT8 u8ServiceClassNameLength;
+ u8 u8ServiceClassNameLength;
/* 32bytes ServiceClassName Of The Service Flow */
- B_UINT8 u8ServiceClassName[32];
+ u8 u8ServiceClassName[32];
/* 8bit Indicates whether or not MBS service is requested for this Serivce Flow */
- B_UINT8 u8MBSService;
+ u8 u8MBSService;
/* 8bit QOS Parameter Set specifies proper application of QoS parameters to Provisioned, Admitted and Active sets */
- B_UINT8 u8QosParamSet;
+ u8 u8QosParamSet;
/* 8bit Traffic Priority Of the Service Flow */
- B_UINT8 u8TrafficPriority;
+ u8 u8TrafficPriority;
/* 8bit Uplink Grant Scheduling Type of The Service Flow */
- B_UINT8 u8ServiceFlowSchedulingType;
+ u8 u8ServiceFlowSchedulingType;
/* 8bit Request transmission Policy of the Service Flow */
- B_UINT8 u8RequesttransmissionPolicy;
+ u8 u8RequesttransmissionPolicy;
/* 8bit Specifies whether SDUs for this Service flow are of FixedLength or Variable length */
- B_UINT8 u8FixedLengthVSVariableLengthSDUIndicator;
+ u8 u8FixedLengthVSVariableLengthSDUIndicator;
/* 8bit Length of the SDU for a fixed length SDU service flow */
- B_UINT8 u8SDUSize;
+ u8 u8SDUSize;
/* 8bit Indicates whether or not ARQ is requested for this connection */
- B_UINT8 u8ARQEnable;
+ u8 u8ARQEnable;
/* < 8bit Indicates whether or not data has tobe delivered in order to higher layer */
- B_UINT8 u8ARQDeliverInOrder;
+ u8 u8ARQDeliverInOrder;
/* 8bit Receiver ARQ ACK processing time */
- B_UINT8 u8RxARQAckProcessingTime;
+ u8 u8RxARQAckProcessingTime;
/* 8bit Convergence Sublayer Specification Of The Service Flow */
- B_UINT8 u8CSSpecification;
+ u8 u8CSSpecification;
/* 8 bit Type of data delivery service */
- B_UINT8 u8TypeOfDataDeliveryService;
+ u8 u8TypeOfDataDeliveryService;
/* 8bit Specifies whether a service flow may generate Paging */
- B_UINT8 u8PagingPreference;
+ u8 u8PagingPreference;
/* 8bit Indicates the MBS Zone through which the connection or virtual connection is valid */
- B_UINT8 u8MBSZoneIdentifierassignment;
+ u8 u8MBSZoneIdentifierassignment;
/* 8bit Specifies whether traffic on SF should generate MOB_TRF_IND to MS in sleep mode */
- B_UINT8 u8TrafficIndicationPreference;
+ u8 u8TrafficIndicationPreference;
/* 8bit Speciifes the length of predefined Global QoS parameter set encoding for this SF */
- B_UINT8 u8GlobalServicesClassNameLength;
+ u8 u8GlobalServicesClassNameLength;
/* 6 byte Speciifes the predefined Global QoS parameter set encoding for this SF */
- B_UINT8 u8GlobalServicesClassName[GLOBAL_SF_CLASSNAME_LENGTH];
+ u8 u8GlobalServicesClassName[GLOBAL_SF_CLASSNAME_LENGTH];
/* 8bit Indicates whether or not SN feedback is enabled for the conn */
- B_UINT8 u8SNFeedbackEnabled;
+ u8 u8SNFeedbackEnabled;
/* Indicates the size of the Fragment Sequence Number for the connection */
- B_UINT8 u8FSNSize;
+ u8 u8FSNSize;
/* 8bit Number of CIDs in active BS list */
- B_UINT8 u8CIDAllocation4activeBSsLength;
+ u8 u8CIDAllocation4activeBSsLength;
/* CIDs of BS in the active list */
- B_UINT8 u8CIDAllocation4activeBSs[MAX_NUM_ACTIVE_BS];
+ u8 u8CIDAllocation4activeBSs[MAX_NUM_ACTIVE_BS];
/* Specifies if PDU extended subheader should be applied on every PDU on this conn */
- B_UINT8 u8PDUSNExtendedSubheader4HarqReordering;
+ u8 u8PDUSNExtendedSubheader4HarqReordering;
/* 8bit Specifies whether the connection uses HARQ or not */
- B_UINT8 u8HARQServiceFlows;
+ u8 u8HARQServiceFlows;
/* Specifies the length of Authorization token */
- B_UINT8 u8AuthTokenLength;
+ u8 u8AuthTokenLength;
/* Specifies the Authorization token */
- B_UINT8 u8AuthToken[AUTH_TOKEN_LENGTH];
+ u8 u8AuthToken[AUTH_TOKEN_LENGTH];
/* specifes Number of HARQ channels used to carry data length */
- B_UINT8 u8HarqChannelMappingLength;
+ u8 u8HarqChannelMappingLength;
/* specifes HARQ channels used to carry data */
- B_UINT8 u8HARQChannelMapping[NUM_HARQ_CHANNELS];
+ u8 u8HARQChannelMapping[NUM_HARQ_CHANNELS];
/* 8bit Length of Vendor Specific QoS Params */
- B_UINT8 u8VendorSpecificQoSParamLength;
+ u8 u8VendorSpecificQoSParamLength;
/* 1byte Vendor Specific QoS Param Of The Service Flow */
- B_UINT8 u8VendorSpecificQoSParam[VENDOR_SPECIF_QOS_PARAM];
+ u8 u8VendorSpecificQoSParam[VENDOR_SPECIF_QOS_PARAM];
/* indicates total classifiers in the SF */
- B_UINT8 u8TotalClassifiers; /* < Total number of valid classifiers */
- B_UINT8 bValid; /* < Validity flag */
- B_UINT8 u8Padding; /* < Padding byte */
+ u8 u8TotalClassifiers; /* < Total number of valid classifiers */
+ u8 bValid; /* < Validity flag */
+ u8 u8Padding; /* < Padding byte */
/*
* Structure for Convergence SubLayer Types with a maximum of 4 classifiers
*/
@@ -248,64 +248,64 @@
};
struct bcm_add_request {
- B_UINT8 u8Type; /* < Type */
- B_UINT8 eConnectionDir; /* < Connection direction */
+ u8 u8Type; /* < Type */
+ u8 eConnectionDir; /* < Connection direction */
/* brief 16 bit TID */
- B_UINT16 u16TID; /* < 16bit TID */
+ u16 u16TID; /* < 16bit TID */
/* brief 16bitCID */
- B_UINT16 u16CID; /* < 16bit CID */
+ u16 u16CID; /* < 16bit CID */
/* brief 16bitVCID */
- B_UINT16 u16VCID; /* < 16bit VCID */
+ u16 u16VCID; /* < 16bit VCID */
struct bcm_connect_mgr_params *psfParameterSet; /* < connection manager parameters */
};
struct bcm_add_indication {
- B_UINT8 u8Type; /* < Type */
- B_UINT8 eConnectionDir; /* < Connection Direction */
+ u8 u8Type; /* < Type */
+ u8 eConnectionDir; /* < Connection Direction */
/* brief 16 bit TID */
- B_UINT16 u16TID; /* < TID */
+ u16 u16TID; /* < TID */
/* brief 16bitCID */
- B_UINT16 u16CID; /* < 16bitCID */
+ u16 u16CID; /* < 16bitCID */
/* brief 16bitVCID */
- B_UINT16 u16VCID; /* < 16bitVCID */
+ u16 u16VCID; /* < 16bitVCID */
struct bcm_connect_mgr_params *psfAuthorizedSet; /* Authorized set of connection manager parameters */
struct bcm_connect_mgr_params *psfAdmittedSet; /* Admitted set of connection manager parameters */
struct bcm_connect_mgr_params *psfActiveSet; /* Activeset of connection manager parameters */
- B_UINT8 u8CC; /* <Confirmation Code */
- B_UINT8 u8Padd; /* < 8-bit Padding */
- B_UINT16 u16Padd; /* < 16 bit Padding */
+ u8 u8CC; /* <Confirmation Code */
+ u8 u8Padd; /* < 8-bit Padding */
+ u16 u16Padd; /* < 16 bit Padding */
};
struct bcm_del_request {
- B_UINT8 u8Type; /* < Type */
- B_UINT8 u8Padding; /* < Padding byte */
- B_UINT16 u16TID; /* < TID */
+ u8 u8Type; /* < Type */
+ u8 u8Padding; /* < Padding byte */
+ u16 u16TID; /* < TID */
/* brief 32bitSFID */
- B_UINT32 u32SFID; /* < SFID */
+ u32 u32SFID; /* < SFID */
};
struct bcm_del_indication {
- B_UINT8 u8Type; /* < Type */
- B_UINT8 u8Padding; /* < Padding */
- B_UINT16 u16TID; /* < TID */
+ u8 u8Type; /* < Type */
+ u8 u8Padding; /* < Padding */
+ u16 u16TID; /* < TID */
/* brief 16bitCID */
- B_UINT16 u16CID; /* < CID */
+ u16 u16CID; /* < CID */
/* brief 16bitVCID */
- B_UINT16 u16VCID; /* < VCID */
+ u16 u16VCID; /* < VCID */
/* brief 32bitSFID */
- B_UINT32 u32SFID; /* < SFID */
+ u32 u32SFID; /* < SFID */
/* brief 8bit Confirmation code */
- B_UINT8 u8ConfirmationCode; /* < Confirmation code */
- B_UINT8 u8Padding1[3]; /* < 3 byte Padding */
+ u8 u8ConfirmationCode; /* < Confirmation code */
+ u8 u8Padding1[3]; /* < 3 byte Padding */
};
struct bcm_stim_sfhostnotify {
- B_UINT32 SFID; /* SFID of the service flow */
- B_UINT16 newCID; /* the new/changed CID */
- B_UINT16 VCID; /* Get new Vcid if the flow has been made active in CID update TLV, but was inactive earlier or the orig vcid */
- B_UINT8 RetainSF; /* Indication to Host if the SF is to be retained or deleted; if TRUE-retain else delete */
- B_UINT8 QoSParamSet; /* QoS paramset of the retained SF */
- B_UINT16 u16reserved; /* For byte alignment */
+ u32 SFID; /* SFID of the service flow */
+ u16 newCID; /* the new/changed CID */
+ u16 VCID; /* Get new Vcid if the flow has been made active in CID update TLV, but was inactive earlier or the orig vcid */
+ u8 RetainSF; /* Indication to Host if the SF is to be retained or deleted; if TRUE-retain else delete */
+ u8 QoSParamSet; /* QoS paramset of the retained SF */
+ u16 u16reserved; /* For byte alignment */
};
#endif
diff --git a/drivers/staging/bcm/hostmibs.c b/drivers/staging/bcm/hostmibs.c
index 10361bb..3c5f4a5 100644
--- a/drivers/staging/bcm/hostmibs.c
+++ b/drivers/staging/bcm/hostmibs.c
@@ -9,7 +9,7 @@
#include "headers.h"
-INT ProcessGetHostMibs(struct bcm_mini_adapter *Adapter, S_MIBS_HOST_STATS_MIBS *pstHostMibs)
+INT ProcessGetHostMibs(struct bcm_mini_adapter *Adapter, struct bcm_host_stats_mibs *pstHostMibs)
{
S_SERVICEFLOW_ENTRY *pstServiceFlowEntry = NULL;
S_PHS_RULE *pstPhsRule = NULL;
@@ -31,7 +31,7 @@
astClassifierTable[nClassifierIndex],
(PVOID) & Adapter->
astClassifierTable[nClassifierIndex],
- sizeof(S_MIBS_CLASSIFIER_RULE));
+ sizeof(struct bcm_mibs_classifier_rule));
}
/* Copy the SF Table */
@@ -39,7 +39,7 @@
if (Adapter->PackInfo[nSfIndex].bValid) {
memcpy((PVOID) & pstHostMibs->astSFtable[nSfIndex],
(PVOID) & Adapter->PackInfo[nSfIndex],
- sizeof(S_MIBS_SERVICEFLOW_TABLE));
+ sizeof(struct bcm_mibs_table));
} else {
/* If index in not valid,
* don't process this for the PHS table.
@@ -94,16 +94,16 @@
return STATUS_SUCCESS;
}
-VOID GetDroppedAppCntrlPktMibs(S_MIBS_HOST_STATS_MIBS *pstHostMibs, struct bcm_tarang_data *pTarang)
+VOID GetDroppedAppCntrlPktMibs(struct bcm_host_stats_mibs *pstHostMibs, struct bcm_tarang_data *pTarang)
{
memcpy(&(pstHostMibs->stDroppedAppCntrlMsgs),
&(pTarang->stDroppedAppCntrlMsgs),
- sizeof(S_MIBS_DROPPED_APP_CNTRL_MESSAGES));
+ sizeof(struct bcm_mibs_dropped_cntrl_msg));
}
VOID CopyMIBSExtendedSFParameters(struct bcm_mini_adapter *Adapter, struct bcm_connect_mgr_params *psfLocalSet, UINT uiSearchRuleIndex)
{
- S_MIBS_EXTSERVICEFLOW_PARAMETERS *t = &Adapter->PackInfo[uiSearchRuleIndex].stMibsExtServiceFlowTable;
+ struct bcm_mibs_parameters *t = &Adapter->PackInfo[uiSearchRuleIndex].stMibsExtServiceFlowTable;
t->wmanIfSfid = psfLocalSet->u32SFID;
t->wmanIfCmnCpsMaxSustainedRate = psfLocalSet->u32MaxSustainedTrafficRate;
diff --git a/drivers/staging/bcm/nvm.c b/drivers/staging/bcm/nvm.c
index b034eb5..eab676f 100644
--- a/drivers/staging/bcm/nvm.c
+++ b/drivers/staging/bcm/nvm.c
@@ -14,25 +14,25 @@
static unsigned int BcmGetFlashSize(struct bcm_mini_adapter *Adapter);
static NVM_TYPE BcmGetNvmType(struct bcm_mini_adapter *Adapter);
-static int BcmGetSectionValEndOffset(struct bcm_mini_adapter *Adapter, FLASH2X_SECTION_VAL eFlash2xSectionVal);
+static int BcmGetSectionValEndOffset(struct bcm_mini_adapter *Adapter, enum bcm_flash2x_section_val eFlash2xSectionVal);
static B_UINT8 IsOffsetWritable(struct bcm_mini_adapter *Adapter, unsigned int uiOffset);
-static int IsSectionWritable(struct bcm_mini_adapter *Adapter, FLASH2X_SECTION_VAL Section);
-static int IsSectionExistInVendorInfo(struct bcm_mini_adapter *Adapter, FLASH2X_SECTION_VAL section);
+static int IsSectionWritable(struct bcm_mini_adapter *Adapter, enum bcm_flash2x_section_val Section);
+static int IsSectionExistInVendorInfo(struct bcm_mini_adapter *Adapter, enum bcm_flash2x_section_val section);
-static int ReadDSDPriority(struct bcm_mini_adapter *Adapter, FLASH2X_SECTION_VAL dsd);
-static int ReadDSDSignature(struct bcm_mini_adapter *Adapter, FLASH2X_SECTION_VAL dsd);
-static int ReadISOPriority(struct bcm_mini_adapter *Adapter, FLASH2X_SECTION_VAL iso);
-static int ReadISOSignature(struct bcm_mini_adapter *Adapter, FLASH2X_SECTION_VAL iso);
+static int ReadDSDPriority(struct bcm_mini_adapter *Adapter, enum bcm_flash2x_section_val dsd);
+static int ReadDSDSignature(struct bcm_mini_adapter *Adapter, enum bcm_flash2x_section_val dsd);
+static int ReadISOPriority(struct bcm_mini_adapter *Adapter, enum bcm_flash2x_section_val iso);
+static int ReadISOSignature(struct bcm_mini_adapter *Adapter, enum bcm_flash2x_section_val iso);
-static int CorruptDSDSig(struct bcm_mini_adapter *Adapter, FLASH2X_SECTION_VAL eFlash2xSectionVal);
-static int CorruptISOSig(struct bcm_mini_adapter *Adapter, FLASH2X_SECTION_VAL eFlash2xSectionVal);
+static int CorruptDSDSig(struct bcm_mini_adapter *Adapter, enum bcm_flash2x_section_val eFlash2xSectionVal);
+static int CorruptISOSig(struct bcm_mini_adapter *Adapter, enum bcm_flash2x_section_val eFlash2xSectionVal);
static int SaveHeaderIfPresent(struct bcm_mini_adapter *Adapter, PUCHAR pBuff, unsigned int uiSectAlignAddr);
static int WriteToFlashWithoutSectorErase(struct bcm_mini_adapter *Adapter, PUINT pBuff,
- FLASH2X_SECTION_VAL eFlash2xSectionVal,
+ enum bcm_flash2x_section_val eFlash2xSectionVal,
unsigned int uiOffset, unsigned int uiNumBytes);
-static FLASH2X_SECTION_VAL getHighestPriDSD(struct bcm_mini_adapter *Adapter);
-static FLASH2X_SECTION_VAL getHighestPriISO(struct bcm_mini_adapter *Adapter);
+static enum bcm_flash2x_section_val getHighestPriDSD(struct bcm_mini_adapter *Adapter);
+static enum bcm_flash2x_section_val getHighestPriISO(struct bcm_mini_adapter *Adapter);
static int BeceemFlashBulkRead(
struct bcm_mini_adapter *Adapter,
@@ -2413,7 +2413,7 @@
return STATUS_SUCCESS;
}
-static int IsSectionExistInVendorInfo(struct bcm_mini_adapter *Adapter, FLASH2X_SECTION_VAL section)
+static int IsSectionExistInVendorInfo(struct bcm_mini_adapter *Adapter, enum bcm_flash2x_section_val section)
{
return (Adapter->uiVendorExtnFlag &&
(Adapter->psFlash2xVendorInfo->VendorSection[section].AccessFlags & FLASH2X_SECTION_PRESENT) &&
@@ -2660,14 +2660,14 @@
/*
* BcmGetSectionValStartOffset - this will calculate the section's starting offset if section val is given
* @Adapter : Drivers Private Data structure
- * @eFlashSectionVal : Flash secion value defined in enum FLASH2X_SECTION_VAL
+ * @eFlashSectionVal : Flash secion value defined in enum bcm_flash2x_section_val
*
* Return value:-
* On success it return the start offset of the provided section val
* On Failure -returns STATUS_FAILURE
*/
-int BcmGetSectionValStartOffset(struct bcm_mini_adapter *Adapter, FLASH2X_SECTION_VAL eFlashSectionVal)
+int BcmGetSectionValStartOffset(struct bcm_mini_adapter *Adapter, enum bcm_flash2x_section_val eFlashSectionVal)
{
/*
* Considering all the section for which end offset can be calculated or directly given
@@ -2752,14 +2752,14 @@
/*
* BcmGetSectionValEndOffset - this will calculate the section's Ending offset if section val is given
* @Adapter : Drivers Private Data structure
- * @eFlashSectionVal : Flash secion value defined in enum FLASH2X_SECTION_VAL
+ * @eFlashSectionVal : Flash secion value defined in enum bcm_flash2x_section_val
*
* Return value:-
* On success it return the end offset of the provided section val
* On Failure -returns STATUS_FAILURE
*/
-int BcmGetSectionValEndOffset(struct bcm_mini_adapter *Adapter, FLASH2X_SECTION_VAL eFlash2xSectionVal)
+int BcmGetSectionValEndOffset(struct bcm_mini_adapter *Adapter, enum bcm_flash2x_section_val eFlash2xSectionVal)
{
int SectEndOffset = 0;
@@ -2837,7 +2837,7 @@
* BcmFlash2xBulkRead:- Read API for Flash Map 2.x .
* @Adapter :Driver Private Data Structure
* @pBuffer : Buffer where data has to be put after reading
- * @eFlashSectionVal :Flash Section Val defined in FLASH2X_SECTION_VAL
+ * @eFlashSectionVal :Flash Section Val defined in enum bcm_flash2x_section_val
* @uiOffsetWithinSectionVal :- Offset with in provided section
* @uiNumBytes : Number of Bytes for Read
*
@@ -2847,7 +2847,7 @@
int BcmFlash2xBulkRead(struct bcm_mini_adapter *Adapter,
PUINT pBuffer,
- FLASH2X_SECTION_VAL eFlash2xSectionVal,
+ enum bcm_flash2x_section_val eFlash2xSectionVal,
unsigned int uiOffsetWithinSectionVal,
unsigned int uiNumBytes)
{
@@ -2898,7 +2898,7 @@
* BcmFlash2xBulkWrite :-API for Writing on the Flash Map 2.x.
* @Adapter :Driver Private Data Structure
* @pBuffer : Buffer From where data has to taken for writing
- * @eFlashSectionVal :Flash Section Val defined in FLASH2X_SECTION_VAL
+ * @eFlashSectionVal :Flash Section Val defined in enum bcm_flash2x_section_val
* @uiOffsetWithinSectionVal :- Offset with in provided section
* @uiNumBytes : Number of Bytes for Write
*
@@ -2909,7 +2909,7 @@
int BcmFlash2xBulkWrite(struct bcm_mini_adapter *Adapter,
PUINT pBuffer,
- FLASH2X_SECTION_VAL eFlash2xSectVal,
+ enum bcm_flash2x_section_val eFlash2xSectVal,
unsigned int uiOffset,
unsigned int uiNumBytes,
unsigned int bVerify)
@@ -2971,7 +2971,7 @@
static int BcmGetActiveDSD(struct bcm_mini_adapter *Adapter)
{
- FLASH2X_SECTION_VAL uiHighestPriDSD = 0;
+ enum bcm_flash2x_section_val uiHighestPriDSD = 0;
uiHighestPriDSD = getHighestPriDSD(Adapter);
Adapter->eActiveDSD = uiHighestPriDSD;
@@ -3064,7 +3064,7 @@
return FALSE;
}
-static int BcmDumpFlash2xSectionBitMap(PFLASH2X_BITMAP psFlash2xBitMap)
+static int BcmDumpFlash2xSectionBitMap(struct bcm_flash2x_bitmap *psFlash2xBitMap)
{
struct bcm_mini_adapter *Adapter = GET_BCM_ADAPTER(gblpnetdev);
@@ -3099,11 +3099,11 @@
* Failure:- negative error code
*/
-int BcmGetFlash2xSectionalBitMap(struct bcm_mini_adapter *Adapter, PFLASH2X_BITMAP psFlash2xBitMap)
+int BcmGetFlash2xSectionalBitMap(struct bcm_mini_adapter *Adapter, struct bcm_flash2x_bitmap *psFlash2xBitMap)
{
PFLASH2X_CS_INFO psFlash2xCSInfo = Adapter->psFlash2xCSInfo;
- FLASH2X_SECTION_VAL uiHighestPriDSD = 0;
- FLASH2X_SECTION_VAL uiHighestPriISO = 0;
+ enum bcm_flash2x_section_val uiHighestPriDSD = 0;
+ enum bcm_flash2x_section_val uiHighestPriISO = 0;
BOOLEAN SetActiveDSDDone = FALSE;
BOOLEAN SetActiveISODone = FALSE;
@@ -3349,7 +3349,7 @@
*
*/
-int BcmSetActiveSection(struct bcm_mini_adapter *Adapter, FLASH2X_SECTION_VAL eFlash2xSectVal)
+int BcmSetActiveSection(struct bcm_mini_adapter *Adapter, enum bcm_flash2x_section_val eFlash2xSectVal)
{
unsigned int SectImagePriority = 0;
int Status = STATUS_SUCCESS;
@@ -3529,10 +3529,10 @@
*
*/
-int BcmCopyISO(struct bcm_mini_adapter *Adapter, FLASH2X_COPY_SECTION sCopySectStrut)
+int BcmCopyISO(struct bcm_mini_adapter *Adapter, struct bcm_flash2x_copy_section sCopySectStrut)
{
PCHAR Buff = NULL;
- FLASH2X_SECTION_VAL eISOReadPart = 0, eISOWritePart = 0;
+ enum bcm_flash2x_section_val eISOReadPart = 0, eISOWritePart = 0;
unsigned int uiReadOffsetWithinPart = 0, uiWriteOffsetWithinPart = 0;
unsigned int uiTotalDataToCopy = 0;
BOOLEAN IsThisHeaderSector = FALSE;
@@ -3813,7 +3813,7 @@
* Failure :-Return negative error code
*/
-int BcmFlash2xCorruptSig(struct bcm_mini_adapter *Adapter, FLASH2X_SECTION_VAL eFlash2xSectionVal)
+int BcmFlash2xCorruptSig(struct bcm_mini_adapter *Adapter, enum bcm_flash2x_section_val eFlash2xSectionVal)
{
int Status = STATUS_SUCCESS;
@@ -3841,7 +3841,7 @@
* Failure :-Return negative error code
*/
-int BcmFlash2xWriteSig(struct bcm_mini_adapter *Adapter, FLASH2X_SECTION_VAL eFlashSectionVal)
+int BcmFlash2xWriteSig(struct bcm_mini_adapter *Adapter, enum bcm_flash2x_section_val eFlashSectionVal)
{
unsigned int uiSignature = 0;
unsigned int uiOffset = 0;
@@ -3901,7 +3901,7 @@
* Return values:-Return TRUE is request is valid else FALSE.
*/
-int validateFlash2xReadWrite(struct bcm_mini_adapter *Adapter, PFLASH2X_READWRITE psFlash2xReadWrite)
+int validateFlash2xReadWrite(struct bcm_mini_adapter *Adapter, struct bcm_flash2x_readwrite *psFlash2xReadWrite)
{
unsigned int uiNumOfBytes = 0;
unsigned int uiSectStartOffset = 0;
@@ -4021,8 +4021,8 @@
*/
int BcmCopySection(struct bcm_mini_adapter *Adapter,
- FLASH2X_SECTION_VAL SrcSection,
- FLASH2X_SECTION_VAL DstSection,
+ enum bcm_flash2x_section_val SrcSection,
+ enum bcm_flash2x_section_val DstSection,
unsigned int offset,
unsigned int numOfBytes)
{
@@ -4264,7 +4264,7 @@
return STATUS_SUCCESS;
}
-int ReadDSDSignature(struct bcm_mini_adapter *Adapter, FLASH2X_SECTION_VAL dsd)
+int ReadDSDSignature(struct bcm_mini_adapter *Adapter, enum bcm_flash2x_section_val dsd)
{
unsigned int uiDSDsig = 0;
/* unsigned int sigoffsetInMap = 0;
@@ -4289,7 +4289,7 @@
return uiDSDsig;
}
-int ReadDSDPriority(struct bcm_mini_adapter *Adapter, FLASH2X_SECTION_VAL dsd)
+int ReadDSDPriority(struct bcm_mini_adapter *Adapter, enum bcm_flash2x_section_val dsd)
{
/* unsigned int priOffsetInMap = 0 ; */
unsigned int uiDSDPri = STATUS_FAILURE;
@@ -4312,11 +4312,11 @@
return uiDSDPri;
}
-FLASH2X_SECTION_VAL getHighestPriDSD(struct bcm_mini_adapter *Adapter)
+enum bcm_flash2x_section_val getHighestPriDSD(struct bcm_mini_adapter *Adapter)
{
int DSDHighestPri = STATUS_FAILURE;
int DsdPri = 0;
- FLASH2X_SECTION_VAL HighestPriDSD = 0;
+ enum bcm_flash2x_section_val HighestPriDSD = 0;
if (IsSectionWritable(Adapter, DSD2)) {
DSDHighestPri = ReadDSDPriority(Adapter, DSD2);
@@ -4344,7 +4344,7 @@
return HighestPriDSD;
}
-int ReadISOSignature(struct bcm_mini_adapter *Adapter, FLASH2X_SECTION_VAL iso)
+int ReadISOSignature(struct bcm_mini_adapter *Adapter, enum bcm_flash2x_section_val iso)
{
unsigned int uiISOsig = 0;
/* unsigned int sigoffsetInMap = 0;
@@ -4367,7 +4367,7 @@
return uiISOsig;
}
-int ReadISOPriority(struct bcm_mini_adapter *Adapter, FLASH2X_SECTION_VAL iso)
+int ReadISOPriority(struct bcm_mini_adapter *Adapter, enum bcm_flash2x_section_val iso)
{
unsigned int ISOPri = STATUS_FAILURE;
if (IsSectionWritable(Adapter, iso)) {
@@ -4386,11 +4386,11 @@
return ISOPri;
}
-FLASH2X_SECTION_VAL getHighestPriISO(struct bcm_mini_adapter *Adapter)
+enum bcm_flash2x_section_val getHighestPriISO(struct bcm_mini_adapter *Adapter)
{
int ISOHighestPri = STATUS_FAILURE;
int ISOPri = 0;
- FLASH2X_SECTION_VAL HighestPriISO = NO_SECTION_VAL;
+ enum bcm_flash2x_section_val HighestPriISO = NO_SECTION_VAL;
if (IsSectionWritable(Adapter, ISO_IMAGE2)) {
ISOHighestPri = ReadISOPriority(Adapter, ISO_IMAGE2);
@@ -4412,7 +4412,7 @@
int WriteToFlashWithoutSectorErase(struct bcm_mini_adapter *Adapter,
PUINT pBuff,
- FLASH2X_SECTION_VAL eFlash2xSectionVal,
+ enum bcm_flash2x_section_val eFlash2xSectionVal,
unsigned int uiOffset,
unsigned int uiNumBytes)
{
@@ -4468,7 +4468,7 @@
return Status;
}
-BOOLEAN IsSectionExistInFlash(struct bcm_mini_adapter *Adapter, FLASH2X_SECTION_VAL section)
+BOOLEAN IsSectionExistInFlash(struct bcm_mini_adapter *Adapter, enum bcm_flash2x_section_val section)
{
BOOLEAN SectionPresent = FALSE;
@@ -4523,7 +4523,7 @@
return SectionPresent;
}
-int IsSectionWritable(struct bcm_mini_adapter *Adapter, FLASH2X_SECTION_VAL Section)
+int IsSectionWritable(struct bcm_mini_adapter *Adapter, enum bcm_flash2x_section_val Section)
{
int offset = STATUS_FAILURE;
int Status = FALSE;
@@ -4546,7 +4546,7 @@
return Status;
}
-static int CorruptDSDSig(struct bcm_mini_adapter *Adapter, FLASH2X_SECTION_VAL eFlash2xSectionVal)
+static int CorruptDSDSig(struct bcm_mini_adapter *Adapter, enum bcm_flash2x_section_val eFlash2xSectionVal)
{
PUCHAR pBuff = NULL;
unsigned int sig = 0;
@@ -4608,7 +4608,7 @@
return STATUS_SUCCESS;
}
-static int CorruptISOSig(struct bcm_mini_adapter *Adapter, FLASH2X_SECTION_VAL eFlash2xSectionVal)
+static int CorruptISOSig(struct bcm_mini_adapter *Adapter, enum bcm_flash2x_section_val eFlash2xSectionVal)
{
PUCHAR pBuff = NULL;
unsigned int sig = 0;
diff --git a/drivers/staging/bcm/vendorspecificextn.c b/drivers/staging/bcm/vendorspecificextn.c
index 833883c..40be60a 100644
--- a/drivers/staging/bcm/vendorspecificextn.c
+++ b/drivers/staging/bcm/vendorspecificextn.c
@@ -89,7 +89,7 @@
//
//------------------------------------------------------------------
-INT vendorextnReadSection(PVOID pContext, PUCHAR pBuffer, FLASH2X_SECTION_VAL SectionVal,
+INT vendorextnReadSection(PVOID pContext, PUCHAR pBuffer, enum bcm_flash2x_section_val SectionVal,
UINT offset, UINT numOfBytes)
{
return STATUS_FAILURE;
@@ -114,7 +114,7 @@
// STATUS_SUCCESS/STATUS_FAILURE
//
//------------------------------------------------------------------
-INT vendorextnWriteSection(PVOID pContext, PUCHAR pBuffer, FLASH2X_SECTION_VAL SectionVal,
+INT vendorextnWriteSection(PVOID pContext, PUCHAR pBuffer, enum bcm_flash2x_section_val SectionVal,
UINT offset, UINT numOfBytes, BOOLEAN bVerify)
{
return STATUS_FAILURE;
@@ -138,7 +138,7 @@
// STATUS_SUCCESS/STATUS_FAILURE
//
//------------------------------------------------------------------
-INT vendorextnWriteSectionWithoutErase(PVOID pContext, PUCHAR pBuffer, FLASH2X_SECTION_VAL SectionVal,
+INT vendorextnWriteSectionWithoutErase(PVOID pContext, PUCHAR pBuffer, enum bcm_flash2x_section_val SectionVal,
UINT offset, UINT numOfBytes)
{
return STATUS_FAILURE;
diff --git a/drivers/staging/bcm/vendorspecificextn.h b/drivers/staging/bcm/vendorspecificextn.h
index f237891b..834410e 100644
--- a/drivers/staging/bcm/vendorspecificextn.h
+++ b/drivers/staging/bcm/vendorspecificextn.h
@@ -8,11 +8,11 @@
INT vendorextnExit(struct bcm_mini_adapter *Adapter);
INT vendorextnInit(struct bcm_mini_adapter *Adapter);
INT vendorextnIoctl(struct bcm_mini_adapter *Adapter, UINT cmd, ULONG arg);
-INT vendorextnReadSection(PVOID pContext, PUCHAR pBuffer, FLASH2X_SECTION_VAL SectionVal,
+INT vendorextnReadSection(PVOID pContext, PUCHAR pBuffer, enum bcm_flash2x_section_val SectionVal,
UINT offset, UINT numOfBytes);
-INT vendorextnWriteSection(PVOID pContext, PUCHAR pBuffer, FLASH2X_SECTION_VAL SectionVal,
+INT vendorextnWriteSection(PVOID pContext, PUCHAR pBuffer, enum bcm_flash2x_section_val SectionVal,
UINT offset, UINT numOfBytes, BOOLEAN bVerify);
-INT vendorextnWriteSectionWithoutErase(PVOID pContext, PUCHAR pBuffer, FLASH2X_SECTION_VAL SectionVal,
+INT vendorextnWriteSectionWithoutErase(PVOID pContext, PUCHAR pBuffer, enum bcm_flash2x_section_val SectionVal,
UINT offset, UINT numOfBytes);
#endif /* */
diff --git a/drivers/staging/ccg/ccg.c b/drivers/staging/ccg/ccg.c
index 93e1e2f..ffc5f73 100644
--- a/drivers/staging/ccg/ccg.c
+++ b/drivers/staging/ccg/ccg.c
@@ -1239,7 +1239,7 @@
}
-static int __init init(void)
+static int __init ccg_init(void)
{
struct ccg_dev *dev;
int err;
@@ -1280,13 +1280,13 @@
return err;
}
-module_init(init);
+module_init(ccg_init);
-static void __exit cleanup(void)
+static void __exit ccg_exit(void)
{
usb_composite_unregister(&ccg_usb_driver);
class_destroy(ccg_class);
kfree(_ccg_dev);
_ccg_dev = NULL;
}
-module_exit(cleanup);
+module_exit(ccg_exit);
diff --git a/drivers/staging/ccg/u_serial.c b/drivers/staging/ccg/u_serial.c
index 5b3f5ff..373c406 100644
--- a/drivers/staging/ccg/u_serial.c
+++ b/drivers/staging/ccg/u_serial.c
@@ -1140,8 +1140,10 @@
return status;
fail:
- while (count--)
+ while (count--) {
+ tty_port_destroy(&ports[count].port->port);
kfree(ports[count].port);
+ }
put_tty_driver(gs_tty_driver);
gs_tty_driver = NULL;
return status;
@@ -1195,6 +1197,7 @@
WARN_ON(port->port_usb != NULL);
+ tty_port_destroy(&port->port);
kfree(port);
}
n_ports = 0;
diff --git a/drivers/staging/ced1401/ced_ioc.c b/drivers/staging/ced1401/ced_ioc.c
index c9492ed..d043471 100644
--- a/drivers/staging/ced1401/ced_ioc.c
+++ b/drivers/staging/ced1401/ced_ioc.c
@@ -341,7 +341,7 @@
}
if (iReturn == 0) // if all is OK...
- iReturn = state == 0; // then sucess is that the state is 0
+ iReturn = state == 0; // then success is that the state is 0
} else
iReturn = 0; // we failed
pdx->bForceReset = false; // Clear forced reset flag now
@@ -565,7 +565,7 @@
if (dwIndex >= INBUF_SZ) // see if we fall off buff
dwIndex = 0;
}
- while (dwIndex != dwEnd); // go to last avaliable
+ while (dwIndex != dwEnd); // go to last available
}
spin_unlock_irq(&pdx->charInLock);
@@ -697,8 +697,7 @@
return -EFAULT; // ...then we are done
// Now allocate space to hold the page pointer and virtual address pointer tables
- pPages =
- (struct page **)kmalloc(len * sizeof(struct page *), GFP_KERNEL);
+ pPages = kmalloc(len * sizeof(struct page *), GFP_KERNEL);
if (!pPages) {
iReturn = U14ERR_NOMEMORY;
goto error;
@@ -913,18 +912,24 @@
iReturn = U14ERR_BADAREA;
else {
// Return the best information we have - we don't have physical addresses
- TGET_TX_BLOCK tx;
- memset(&tx, 0, sizeof(tx)); // clean out local work structure
- tx.size = pdx->rTransDef[dwIdent].dwLength;
- tx.linear = (long long)((long)pdx->rTransDef[dwIdent].lpvBuff);
- tx.avail = GET_TX_MAXENTRIES; // how many blocks we could return
- tx.used = 1; // number we actually return
- tx.entries[0].physical =
- (long long)(tx.linear + pdx->StagedOffset);
- tx.entries[0].size = tx.size;
+ TGET_TX_BLOCK *tx;
- if (copy_to_user(pTX, &tx, sizeof(tx)))
+ tx = kzalloc(sizeof(*tx), GFP_KERNEL);
+ if (!tx) {
+ mutex_unlock(&pdx->io_mutex);
+ return -ENOMEM;
+ }
+ tx->size = pdx->rTransDef[dwIdent].dwLength;
+ tx->linear = (long long)((long)pdx->rTransDef[dwIdent].lpvBuff);
+ tx->avail = GET_TX_MAXENTRIES; // how many blocks we could return
+ tx->used = 1; // number we actually return
+ tx->entries[0].physical =
+ (long long)(tx->linear + pdx->StagedOffset);
+ tx->entries[0].size = tx->size;
+
+ if (copy_to_user(pTX, tx, sizeof(*tx)))
iReturn = -EFAULT;
+ kfree(tx);
}
mutex_unlock(&pdx->io_mutex);
return iReturn;
@@ -1508,7 +1513,7 @@
iReturn = U14ERR_BADAREA;
if (copy_to_user(pCB, &cb, sizeof(cb)))
- return -EFAULT;
+ iReturn = -EFAULT;
mutex_unlock(&pdx->io_mutex);
return iReturn;
diff --git a/drivers/staging/ced1401/usb1401.c b/drivers/staging/ced1401/usb1401.c
index 6ba0ef6..a27043a 100644
--- a/drivers/staging/ced1401/usb1401.c
+++ b/drivers/staging/ced1401/usb1401.c
@@ -89,14 +89,11 @@
#include <linux/mutex.h>
#include <linux/mm.h>
#include <linux/highmem.h>
-#include <linux/version.h>
-#if ( LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,35) )
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/kref.h>
#include <linux/uaccess.h>
-#endif
#include "usb1401.h"
@@ -123,19 +120,6 @@
#define WRITES_IN_FLIGHT 8
/* arbitrarily chosen */
-/*
-The cause for these errors is that the driver makes use of the functions usb_buffer_alloc() and usb_buffer_free() which got renamed in kernel 2.6.35. This is stated in the Changelog: USB: rename usb_buffer_alloc() and usb_buffer_free() users
- For more clearance what the functions actually do,
- usb_buffer_alloc() is renamed to usb_alloc_coherent()
- usb_buffer_free() is renamed to usb_free_coherent()
- This is needed on Debian 2.6.32-5-amd64
-*/
-#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,35) )
-#define usb_alloc_coherent usb_buffer_alloc
-#define usb_free_coherent usb_buffer_free
-#define noop_llseek NULL
-#endif
-
static struct usb_driver ced_driver;
static void ced_delete(struct kref *kref)
@@ -927,9 +911,9 @@
** ReadHuff
**
** Reads a coded number in and returns it, Code is:
-** If data is in range 0..127 we recieve 1 byte. If data in range 128-16383
-** we recieve two bytes, top bit of first indicates another on its way. If
-** data in range 16383-4194303 we get three bytes, top two bits of first set
+** If data is in range 0..127 we receive 1 byte. If data in range 128-16383
+** we receive two bytes, top bit of first indicates another on its way. If
+** data in range 16384-4194303 we get three bytes, top two bits of first set
** to indicate three byte total.
**
*****************************************************************************/
@@ -1252,12 +1236,7 @@
** ulArg The argument passed in. Note that long is 64-bits in 64-bit system, i.e. it is big
** enough for a 64-bit pointer.
*****************************************************************************/
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,36)
static long ced_ioctl(struct file *file, unsigned int cmd, unsigned long ulArg)
-#else
-static int ced_ioctl(struct inode *node, struct file *file, unsigned int cmd,
- unsigned long ulArg)
-#endif
{
int err = 0;
DEVICE_EXTENSION *pdx = file->private_data;
@@ -1388,11 +1367,7 @@
.release = ced_release,
.flush = ced_flush,
.llseek = noop_llseek,
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,36)
.unlocked_ioctl = ced_ioctl,
-#else
- .ioctl = ced_ioctl,
-#endif
};
/*
@@ -1537,7 +1512,7 @@
static void ced_disconnect(struct usb_interface *interface)
{
DEVICE_EXTENSION *pdx = usb_get_intfdata(interface);
- int minor = interface->minor; // save for message at the end
+ int minor = interface->minor;
int i;
usb_set_intfdata(interface, NULL); // remove the pdx from the interface
@@ -1572,8 +1547,7 @@
pdx->bInDrawDown = true;
time = usb_wait_anchor_empty_timeout(&pdx->submitted, 3000);
- if (!time) // if we timed out we kill the urbs
- {
+ if (!time) { // if we timed out we kill the urbs
usb_kill_anchored_urbs(&pdx->submitted);
dev_err(&pdx->interface->dev, "%s timed out", __func__);
}
diff --git a/drivers/staging/ced1401/usb1401.h b/drivers/staging/ced1401/usb1401.h
index 331ca98..adb5fa4 100644
--- a/drivers/staging/ced1401/usb1401.h
+++ b/drivers/staging/ced1401/usb1401.h
@@ -165,7 +165,7 @@
// Parameters relating to a block read\write that is in progress. Some of these values
// are equivalent to values in rDMAInfo. The values here are those in use, while those
- // in rDMAInfo are those recieved from the 1401 via an escape sequence. If another
+ // in rDMAInfo are those received from the 1401 via an escape sequence. If another
// escape sequence arrives before the previous xfer ends, rDMAInfo values are updated while these
// are used to finish off the current transfer.
volatile short StagedId; // The transfer area id for this transfer
diff --git a/drivers/staging/ced1401/userspace/use1401.c b/drivers/staging/ced1401/userspace/use1401.c
index d4c6316..38e7c1c 100644
--- a/drivers/staging/ced1401/userspace/use1401.c
+++ b/drivers/staging/ced1401/userspace/use1401.c
@@ -145,7 +145,7 @@
** You should add a new one of these to keep things tidy for applications.
**
** DRIVERET_MAX (below) specifies the maximum allowed type code from the
-** 1401 driver; I have set this high to accomodate as yet undesigned 1401
+** 1401 driver; I have set this high to accommodate as yet undesigned 1401
** types. Similarly, as long as the command file names follow the ARM,
** ARN, ARO sequence, these are calculated by the ExtForType function, so
** you don't need to do anything here either.
@@ -160,7 +160,7 @@
** have broken backwards compatibility. Minor number changes mean that we
** have added new functionality that does not break backwards compatibility.
** we starts at 0. Revision changes mean we have fixed something. Each index
-** returns to 0 when a higer one changes.
+** returns to 0 when a higher one changes.
*/
#define U14LIB_MAJOR 4
#define U14LIB_MINOR 0
@@ -211,7 +211,7 @@
/*
** These are the 1401 type codes returned by the driver, they are a slightly
-** odd sequence & start for reasons of compatability with the DOS driver.
+** odd sequence & start for reasons of compatibility with the DOS driver.
** The maximum code value is the upper limit of 1401 device types.
*/
#define DRIVRET_STD 4 // Codes for 1401 types matching driver values
@@ -2327,7 +2327,7 @@
/****************************************************************************
** U14SetTransferEvent Sets an event for notification of application
-** wArea The tranfer area index, from 0 to MAXAREAS-1
+** wArea The transfer area index, from 0 to MAXAREAS-1
** bEvent True to create an event, false to remove it
** bToHost Set 0 for notification on to1401 tranfers, 1 for
** notification of transfers to the host PC
diff --git a/drivers/staging/comedi/Kconfig b/drivers/staging/comedi/Kconfig
index 2093403..7de2a10 100644
--- a/drivers/staging/comedi/Kconfig
+++ b/drivers/staging/comedi/Kconfig
@@ -568,7 +568,6 @@
config COMEDI_ADDI_APCI_035
tristate "ADDI-DATA APCI_035 support"
- depends on VIRT_TO_BUS
---help---
Enable support for ADDI-DATA APCI_035 cards
@@ -577,7 +576,6 @@
config COMEDI_ADDI_APCI_1032
tristate "ADDI-DATA APCI_1032 support"
- depends on VIRT_TO_BUS
---help---
Enable support for ADDI-DATA APCI_1032 cards
@@ -586,7 +584,6 @@
config COMEDI_ADDI_APCI_1500
tristate "ADDI-DATA APCI_1500 support"
- depends on VIRT_TO_BUS
---help---
Enable support for ADDI-DATA APCI_1500 cards
@@ -594,17 +591,17 @@
called addi_apci_1500.
config COMEDI_ADDI_APCI_1516
- tristate "ADDI-DATA APCI_1516 support"
- depends on VIRT_TO_BUS
+ tristate "ADDI-DATA APCI-1016/1516/2016 support"
---help---
- Enable support for ADDI-DATA APCI_1516 cards
+ Enable support for ADDI-DATA APCI-1016, APCI-1516 and APCI-2016 boards.
+ These are 16 channel, optically isolated, digital I/O boards. The 1516
+ and 2016 boards also have a watchdog for resetting the outputs to "0".
To compile this driver as a module, choose M here: the module will be
called addi_apci_1516.
config COMEDI_ADDI_APCI_1564
tristate "ADDI-DATA APCI_1564 support"
- depends on VIRT_TO_BUS
---help---
Enable support for ADDI-DATA APCI_1564 cards
@@ -613,25 +610,14 @@
config COMEDI_ADDI_APCI_16XX
tristate "ADDI-DATA APCI_16xx support"
- depends on VIRT_TO_BUS
---help---
Enable support for ADDI-DATA APCI_16xx cards
To compile this driver as a module, choose M here: the module will be
called addi_apci_16xx.
-config COMEDI_ADDI_APCI_2016
- tristate "ADDI-DATA APCI_2016 support"
- depends on VIRT_TO_BUS
- ---help---
- Enable support for ADDI-DATA APCI_2016 cards
-
- To compile this driver as a module, choose M here: the module will be
- called addi_apci_2016.
-
config COMEDI_ADDI_APCI_2032
tristate "ADDI-DATA APCI_2032 support"
- depends on VIRT_TO_BUS
---help---
Enable support for ADDI-DATA APCI_2032 cards
@@ -640,36 +626,24 @@
config COMEDI_ADDI_APCI_2200
tristate "ADDI-DATA APCI_2200 support"
- depends on VIRT_TO_BUS
---help---
Enable support for ADDI-DATA APCI_2200 cards
To compile this driver as a module, choose M here: the module will be
called addi_apci_2200.
-config COMEDI_ADDI_APCI_3001
- tristate "ADDI-DATA APCI_3001 support"
- depends on VIRT_TO_BUS
- select COMEDI_FC
- ---help---
- Enable support for ADDI-DATA APCI_3001 cards
-
- To compile this driver as a module, choose M here: the module will be
- called addi_apci_3001.
-
config COMEDI_ADDI_APCI_3120
- tristate "ADDI-DATA APCI_3520 support"
+ tristate "ADDI-DATA APCI_3120/3001 support"
depends on VIRT_TO_BUS
select COMEDI_FC
---help---
- Enable support for ADDI-DATA APCI_3520 cards
+ Enable support for ADDI-DATA APCI_3120/3001 cards
To compile this driver as a module, choose M here: the module will be
called addi_apci_3120.
config COMEDI_ADDI_APCI_3501
tristate "ADDI-DATA APCI_3501 support"
- depends on VIRT_TO_BUS
---help---
Enable support for ADDI-DATA APCI_3501 cards
@@ -678,7 +652,6 @@
config COMEDI_ADDI_APCI_3XXX
tristate "ADDI-DATA APCI_3xxx support"
- depends on VIRT_TO_BUS
---help---
Enable support for ADDI-DATA APCI_3xxx cards
@@ -761,10 +734,11 @@
called adv_pci_dio.
config COMEDI_AMPLC_DIO200_PCI
- tristate "Amplicon PCI215 and PCI272 DIO board support"
+ tristate "Amplicon PCI215/PCI272/PCIe215/PCIe236/PCIe296 DIO support"
select COMEDI_AMPLC_DIO200
---help---
- Enable support for Amplicon PCI215 and PCI272 DIO boards.
+ Enable support for Amplicon PCI215, PCI272, PCIe215, PCIe236
+ and PCIe296 DIO boards.
To compile this driver as a module, choose M here: the module will be
called amplc_dio200.
@@ -1263,7 +1237,6 @@
config COMEDI_AMPLC_DIO200
tristate
- select COMEDI_8255
config COMEDI_AMPLC_PC236
tristate
diff --git a/drivers/staging/comedi/comedi.h b/drivers/staging/comedi/comedi.h
index 133f013..c8a8ca1 100644
--- a/drivers/staging/comedi/comedi.h
+++ b/drivers/staging/comedi/comedi.h
@@ -283,6 +283,44 @@
INSN_CONFIG_PWM_GET_H_BRIDGE = 5004
};
+/*
+ * Settings for INSN_CONFIG_DIGITAL_TRIG:
+ * data[0] = INSN_CONFIG_DIGITAL_TRIG
+ * data[1] = trigger ID
+ * data[2] = configuration operation
+ * data[3] = configuration parameter 1
+ * data[4] = configuration parameter 2
+ * data[5] = configuration parameter 3
+ *
+ * operation parameter 1 parameter 2 parameter 3
+ * --------------------------------- ----------- ----------- -----------
+ * COMEDI_DIGITAL_TRIG_DISABLE
+ * COMEDI_DIGITAL_TRIG_ENABLE_EDGES left-shift rising-edges falling-edges
+ * COMEDI_DIGITAL_TRIG_ENABLE_LEVELS left-shift high-levels low-levels
+ *
+ * COMEDI_DIGITAL_TRIG_DISABLE returns the trigger to its default, inactive,
+ * unconfigured state.
+ *
+ * COMEDI_DIGITAL_TRIG_ENABLE_EDGES sets the rising and/or falling edge inputs
+ * that each can fire the trigger.
+ *
+ * COMEDI_DIGITAL_TRIG_ENABLE_LEVELS sets a combination of high and/or low
+ * level inputs that can fire the trigger.
+ *
+ * "left-shift" is useful if the trigger has more than 32 inputs to specify the
+ * first input for this configuration.
+ *
+ * Some sequences of INSN_CONFIG_DIGITAL_TRIG instructions may have a (partly)
+ * accumulative effect, depending on the low-level driver. This is useful
+ * when setting up a trigger that has more than 32 inputs or has a combination
+ * of edge and level triggered inputs.
+ */
+enum comedi_digital_trig_op {
+ COMEDI_DIGITAL_TRIG_DISABLE = 0,
+ COMEDI_DIGITAL_TRIG_ENABLE_EDGES = 1,
+ COMEDI_DIGITAL_TRIG_ENABLE_LEVELS = 2
+};
+
enum comedi_io_direction {
COMEDI_INPUT = 0,
COMEDI_OUTPUT = 1,
@@ -888,7 +926,20 @@
subdevice, preceding counter
subdevice is the last counter
subdevice) */
- AMPLC_DIO_CLK_EXT /* per chip external input pin */
+ AMPLC_DIO_CLK_EXT, /* per chip external input pin */
+ /* the following are "enhanced" clock sources for PCIe models */
+ AMPLC_DIO_CLK_VCC, /* clock input HIGH */
+ AMPLC_DIO_CLK_GND, /* clock input LOW */
+ AMPLC_DIO_CLK_PAT_PRESENT, /* "pattern present" signal */
+ AMPLC_DIO_CLK_20MHZ /* 20 MHz internal clock */
+};
+
+/* Values for setting a clock source with INSN_CONFIG_SET_CLOCK_SRC for
+ * timer subdevice on some Amplicon DIO PCIe boards (amplc_dio200 driver). */
+enum amplc_dio_ts_clock_src {
+ AMPLC_DIO_TS_CLK_1GHZ, /* 1 ns period with 20 ns granularity */
+ AMPLC_DIO_TS_CLK_1MHZ, /* 1 us period */
+ AMPLC_DIO_TS_CLK_1KHZ /* 1 ms period */
};
/* Values for setting a gate source with INSN_CONFIG_SET_GATE_SRC for
@@ -907,7 +958,17 @@
AMPLC_DIO_GAT_RESERVED4,
AMPLC_DIO_GAT_RESERVED5,
AMPLC_DIO_GAT_RESERVED6,
- AMPLC_DIO_GAT_RESERVED7
+ AMPLC_DIO_GAT_RESERVED7,
+ /* the following are "enhanced" gate sources for PCIe models */
+ AMPLC_DIO_GAT_NGATN = 6, /* negated per channel gate input */
+ AMPLC_DIO_GAT_OUTNM2, /* non-negated output of counter
+ channel minus 2 */
+ AMPLC_DIO_GAT_PAT_PRESENT, /* "pattern present" signal */
+ AMPLC_DIO_GAT_PAT_OCCURRED, /* "pattern occurred" latched */
+ AMPLC_DIO_GAT_PAT_GONE, /* "pattern gone away" latched */
+ AMPLC_DIO_GAT_NPAT_PRESENT, /* negated "pattern present" */
+ AMPLC_DIO_GAT_NPAT_OCCURRED, /* negated "pattern occurred" */
+ AMPLC_DIO_GAT_NPAT_GONE /* negated "pattern gone away" */
};
#endif /* _COMEDI_H */
diff --git a/drivers/staging/comedi/comedi_compat32.c b/drivers/staging/comedi/comedi_compat32.c
index 0a5057f..4b7cbfa 100644
--- a/drivers/staging/comedi/comedi_compat32.c
+++ b/drivers/staging/comedi/comedi_compat32.c
@@ -24,7 +24,6 @@
*/
-#define __NO_VERSION__
#include <linux/uaccess.h>
#include <linux/compat.h>
#include <linux/fs.h>
diff --git a/drivers/staging/comedi/comedi_fops.c b/drivers/staging/comedi/comedi_fops.c
index c2a32cf..b7bba17 100644
--- a/drivers/staging/comedi/comedi_fops.c
+++ b/drivers/staging/comedi/comedi_fops.c
@@ -23,7 +23,6 @@
#undef DEBUG
-#define __NO_VERSION__
#include "comedi_compat32.h"
#include <linux/module.h>
@@ -880,6 +879,10 @@
if (insn->n == 5)
return 0;
break;
+ case INSN_CONFIG_DIGITAL_TRIG:
+ if (insn->n == 6)
+ return 0;
+ break;
/* by default we allow the insn since we don't have checks for
* all possible cases yet */
default:
diff --git a/drivers/staging/comedi/comedidev.h b/drivers/staging/comedi/comedidev.h
index cb67a5c..692e1e6 100644
--- a/drivers/staging/comedi/comedidev.h
+++ b/drivers/staging/comedi/comedidev.h
@@ -41,6 +41,7 @@
#include <linux/io.h>
#include <linux/timer.h>
#include <linux/pci.h>
+#include <linux/usb.h>
#include "comedi.h"
@@ -54,9 +55,21 @@
COMEDI_MINORVERSION, COMEDI_MICROVERSION)
#define COMEDI_RELEASE VERSION
-#define PCI_VENDOR_ID_ADLINK 0x144a
+/*
+ * PCI Vendor IDs not in <linux/pci_ids.h>
+ */
+#define PCI_VENDOR_ID_KOLTER 0x1001
#define PCI_VENDOR_ID_ICP 0x104c
+#define PCI_VENDOR_ID_AMCC 0x10e8
+#define PCI_VENDOR_ID_DT 0x1116
+#define PCI_VENDOR_ID_IOTECH 0x1616
#define PCI_VENDOR_ID_CONTEC 0x1221
+#define PCI_VENDOR_ID_CB 0x1307 /* Measurement Computing */
+#define PCI_VENDOR_ID_ADVANTECH 0x13fe
+#define PCI_VENDOR_ID_MEILHAUS 0x1402
+#define PCI_VENDOR_ID_RTD 0x1435
+#define PCI_VENDOR_ID_ADLINK 0x144a
+#define PCI_VENDOR_ID_AMPLICON 0x14dc
#define COMEDI_NUM_MINORS 0x100
#define COMEDI_NUM_BOARD_MINORS 0x30
@@ -181,8 +194,6 @@
unsigned int x);
};
-struct usb_interface;
-
struct comedi_driver {
struct comedi_driver *next;
@@ -190,8 +201,7 @@
struct module *module;
int (*attach) (struct comedi_device *, struct comedi_devconfig *);
void (*detach) (struct comedi_device *);
- int (*attach_pci) (struct comedi_device *, struct pci_dev *);
- int (*attach_usb) (struct comedi_device *, struct usb_interface *);
+ int (*auto_attach) (struct comedi_device *, unsigned long);
/* number of elements in board_name and board_id arrays */
unsigned int num_names;
@@ -235,7 +245,7 @@
void (*close) (struct comedi_device *dev);
};
-static inline const void *comedi_board(struct comedi_device *dev)
+static inline const void *comedi_board(const struct comedi_device *dev)
{
return dev->board_ptr;
}
@@ -415,14 +425,6 @@
/* some silly little inline functions */
-static inline int alloc_private(struct comedi_device *dev, int size)
-{
- dev->private = kzalloc(size, GFP_KERNEL);
- if (!dev->private)
- return -ENOMEM;
- return 0;
-}
-
static inline unsigned int bytes_per_sample(const struct comedi_subdevice *subd)
{
if (subd->subdev_flags & SDF_LSAMPL)
@@ -436,9 +438,10 @@
static inline void comedi_set_hw_dev(struct comedi_device *dev,
struct device *hw_dev)
{
+ if (dev->hw_dev == hw_dev)
+ return;
if (dev->hw_dev)
put_device(dev->hw_dev);
-
dev->hw_dev = hw_dev;
if (dev->hw_dev) {
dev->hw_dev = get_device(dev->hw_dev);
@@ -451,6 +454,12 @@
return dev->hw_dev ? to_pci_dev(dev->hw_dev) : NULL;
}
+static inline struct usb_interface *
+comedi_to_usb_interface(struct comedi_device *dev)
+{
+ return dev->hw_dev ? to_usb_interface(dev->hw_dev) : NULL;
+}
+
int comedi_buf_put(struct comedi_async *async, short x);
int comedi_buf_get(struct comedi_async *async, short *x);
@@ -505,11 +514,30 @@
int comedi_alloc_subdevice_minor(struct comedi_device *dev,
struct comedi_subdevice *s);
void comedi_free_subdevice_minor(struct comedi_subdevice *s);
-int comedi_pci_auto_config(struct pci_dev *pcidev,
- struct comedi_driver *driver);
-void comedi_pci_auto_unconfig(struct pci_dev *pcidev);
-int comedi_usb_auto_config(struct usb_interface *intf,
- struct comedi_driver *driver);
-void comedi_usb_auto_unconfig(struct usb_interface *intf);
+int comedi_auto_config(struct device *hardware_device,
+ struct comedi_driver *driver, unsigned long context);
+void comedi_auto_unconfig(struct device *hardware_device);
+
+static inline int comedi_pci_auto_config(struct pci_dev *pcidev,
+ struct comedi_driver *driver)
+{
+ return comedi_auto_config(&pcidev->dev, driver, 0);
+}
+
+static inline void comedi_pci_auto_unconfig(struct pci_dev *pcidev)
+{
+ comedi_auto_unconfig(&pcidev->dev);
+}
+
+static inline int comedi_usb_auto_config(struct usb_interface *intf,
+ struct comedi_driver *driver)
+{
+ return comedi_auto_config(&intf->dev, driver, 0);
+}
+
+static inline void comedi_usb_auto_unconfig(struct usb_interface *intf)
+{
+ comedi_auto_unconfig(&intf->dev);
+}
#endif /* _COMEDIDEV_H */
diff --git a/drivers/staging/comedi/drivers.c b/drivers/staging/comedi/drivers.c
index 1db6bfd..50cf498 100644
--- a/drivers/staging/comedi/drivers.c
+++ b/drivers/staging/comedi/drivers.c
@@ -21,9 +21,6 @@
*/
-#define _GNU_SOURCE
-
-#define __NO_VERSION__
#include <linux/device.h>
#include <linux/module.h>
#include <linux/pci.h>
@@ -833,11 +830,8 @@
async->events = 0;
}
-static int
-comedi_auto_config_helper(struct device *hardware_device,
- struct comedi_driver *driver,
- int (*attach_wrapper) (struct comedi_device *,
- void *), void *context)
+int comedi_auto_config(struct device *hardware_device,
+ struct comedi_driver *driver, unsigned long context)
{
int minor;
struct comedi_device_file_info *dev_file_info;
@@ -847,6 +841,13 @@
if (!comedi_autoconfig)
return 0;
+ if (!driver->auto_attach) {
+ dev_warn(hardware_device,
+ "BUG! comedi driver '%s' has no auto_attach handler\n",
+ driver->driver_name);
+ return -EINVAL;
+ }
+
minor = comedi_alloc_board_minor(hardware_device);
if (minor < 0)
return minor;
@@ -860,9 +861,9 @@
else if (!try_module_get(driver->module))
ret = -EIO;
else {
- /* set comedi_dev->driver here for attach wrapper */
+ comedi_set_hw_dev(comedi_dev, hardware_device);
comedi_dev->driver = driver;
- ret = (*attach_wrapper)(comedi_dev, context);
+ ret = driver->auto_attach(comedi_dev, context);
if (ret < 0) {
module_put(driver->module);
__comedi_device_detach(comedi_dev);
@@ -876,49 +877,9 @@
comedi_free_board_minor(minor);
return ret;
}
+EXPORT_SYMBOL_GPL(comedi_auto_config);
-static int comedi_auto_config_wrapper(struct comedi_device *dev, void *context)
-{
- struct comedi_devconfig *it = context;
- struct comedi_driver *driv = dev->driver;
-
- if (driv->num_names) {
- /* look for generic board entry matching driver name, which
- * has already been copied to it->board_name */
- dev->board_ptr = comedi_recognize(driv, it->board_name);
- if (dev->board_ptr == NULL) {
- dev_warn(dev->class_dev,
- "auto config failed to find board entry '%s' for driver '%s'\n",
- it->board_name, driv->driver_name);
- comedi_report_boards(driv);
- return -EINVAL;
- }
- }
- if (!driv->attach) {
- dev_warn(dev->class_dev,
- "BUG! driver '%s' using old-style auto config but has no attach handler\n",
- driv->driver_name);
- return -EINVAL;
- }
- return driv->attach(dev, it);
-}
-
-static int comedi_auto_config(struct device *hardware_device,
- struct comedi_driver *driver, const int *options,
- unsigned num_options)
-{
- struct comedi_devconfig it;
-
- memset(&it, 0, sizeof(it));
- strncpy(it.board_name, driver->driver_name, COMEDI_NAMELEN);
- it.board_name[COMEDI_NAMELEN - 1] = '\0';
- BUG_ON(num_options > COMEDI_NDEVCONFOPTS);
- memcpy(it.options, options, num_options * sizeof(int));
- return comedi_auto_config_helper(hardware_device, driver,
- comedi_auto_config_wrapper, &it);
-}
-
-static void comedi_auto_unconfig(struct device *hardware_device)
+void comedi_auto_unconfig(struct device *hardware_device)
{
int minor;
@@ -930,6 +891,7 @@
BUG_ON(minor >= COMEDI_NUM_BOARD_MINORS);
comedi_free_board_minor(minor);
}
+EXPORT_SYMBOL_GPL(comedi_auto_unconfig);
/**
* comedi_pci_enable() - Enable the PCI device and request the regions.
@@ -965,48 +927,6 @@
}
EXPORT_SYMBOL_GPL(comedi_pci_disable);
-static int comedi_old_pci_auto_config(struct pci_dev *pcidev,
- struct comedi_driver *driver)
-{
- int options[2];
-
- /* pci bus */
- options[0] = pcidev->bus->number;
- /* pci slot */
- options[1] = PCI_SLOT(pcidev->devfn);
-
- return comedi_auto_config(&pcidev->dev, driver,
- options, ARRAY_SIZE(options));
-}
-
-static int comedi_pci_attach_wrapper(struct comedi_device *dev, void *pcidev)
-{
- return dev->driver->attach_pci(dev, pcidev);
-}
-
-static int comedi_new_pci_auto_config(struct pci_dev *pcidev,
- struct comedi_driver *driver)
-{
- return comedi_auto_config_helper(&pcidev->dev, driver,
- comedi_pci_attach_wrapper, pcidev);
-}
-
-int comedi_pci_auto_config(struct pci_dev *pcidev, struct comedi_driver *driver)
-{
-
- if (driver->attach_pci)
- return comedi_new_pci_auto_config(pcidev, driver);
- else
- return comedi_old_pci_auto_config(pcidev, driver);
-}
-EXPORT_SYMBOL_GPL(comedi_pci_auto_config);
-
-void comedi_pci_auto_unconfig(struct pci_dev *pcidev)
-{
- comedi_auto_unconfig(&pcidev->dev);
-}
-EXPORT_SYMBOL_GPL(comedi_pci_auto_unconfig);
-
int comedi_pci_driver_register(struct comedi_driver *comedi_driver,
struct pci_driver *pci_driver)
{
@@ -1040,42 +960,6 @@
#if IS_ENABLED(CONFIG_USB)
-static int comedi_old_usb_auto_config(struct usb_interface *intf,
- struct comedi_driver *driver)
-{
- return comedi_auto_config(&intf->dev, driver, NULL, 0);
-}
-
-static int comedi_usb_attach_wrapper(struct comedi_device *dev, void *intf)
-{
- return dev->driver->attach_usb(dev, intf);
-}
-
-static int comedi_new_usb_auto_config(struct usb_interface *intf,
- struct comedi_driver *driver)
-{
- return comedi_auto_config_helper(&intf->dev, driver,
- comedi_usb_attach_wrapper, intf);
-}
-
-int comedi_usb_auto_config(struct usb_interface *intf,
- struct comedi_driver *driver)
-{
- BUG_ON(intf == NULL);
- if (driver->attach_usb)
- return comedi_new_usb_auto_config(intf, driver);
- else
- return comedi_old_usb_auto_config(intf, driver);
-}
-EXPORT_SYMBOL_GPL(comedi_usb_auto_config);
-
-void comedi_usb_auto_unconfig(struct usb_interface *intf)
-{
- BUG_ON(intf == NULL);
- comedi_auto_unconfig(&intf->dev);
-}
-EXPORT_SYMBOL_GPL(comedi_usb_auto_unconfig);
-
int comedi_usb_driver_register(struct comedi_driver *comedi_driver,
struct usb_driver *usb_driver)
{
diff --git a/drivers/staging/comedi/drivers/8255.c b/drivers/staging/comedi/drivers/8255.c
index a256622..c7aa41a 100644
--- a/drivers/staging/comedi/drivers/8255.c
+++ b/drivers/staging/comedi/drivers/8255.c
@@ -249,28 +249,13 @@
if (err)
return 2;
- /* step 3 */
+ /* Step 3: check if arguments are trivially valid */
- if (cmd->start_arg != 0) {
- cmd->start_arg = 0;
- err++;
- }
- if (cmd->scan_begin_arg != 0) {
- cmd->scan_begin_arg = 0;
- err++;
- }
- if (cmd->convert_arg != 0) {
- cmd->convert_arg = 0;
- err++;
- }
- if (cmd->scan_end_arg != 1) {
- cmd->scan_end_arg = 1;
- err++;
- }
- if (cmd->stop_arg != 0) {
- cmd->stop_arg = 0;
- err++;
- }
+ err |= cfc_check_trigger_arg_is(&cmd->start_arg, 0);
+ err |= cfc_check_trigger_arg_is(&cmd->scan_begin_arg, 0);
+ err |= cfc_check_trigger_arg_is(&cmd->convert_arg, 0);
+ err |= cfc_check_trigger_arg_is(&cmd->scan_end_arg, 1);
+ err |= cfc_check_trigger_arg_is(&cmd->stop_arg, 0);
if (err)
return 3;
diff --git a/drivers/staging/comedi/drivers/8255_pci.c b/drivers/staging/comedi/drivers/8255_pci.c
index d00aff6..e0a7952 100644
--- a/drivers/staging/comedi/drivers/8255_pci.c
+++ b/drivers/staging/comedi/drivers/8255_pci.c
@@ -65,9 +65,6 @@
#define PCI_DEVICE_ID_ADLINK_PCI7248 0x7248
#define PCI_DEVICE_ID_ADLINK_PCI7296 0x7296
-/* ComputerBoards is now known as Measurement Computing */
-#define PCI_VENDOR_ID_CB 0x1307
-
#define PCI_DEVICE_ID_CB_PCIDIO48H 0x000b
#define PCI_DEVICE_ID_CB_PCIDIO24H 0x0014
#define PCI_DEVICE_ID_CB_PCIDIO96H 0x0017
@@ -216,9 +213,10 @@
return NULL;
}
-static int pci_8255_attach_pci(struct comedi_device *dev,
- struct pci_dev *pcidev)
+static int pci_8255_auto_attach(struct comedi_device *dev,
+ unsigned long context_unused)
{
+ struct pci_dev *pcidev = comedi_to_pci_dev(dev);
const struct pci_8255_boardinfo *board;
struct pci_8255_private *devpriv;
struct comedi_subdevice *s;
@@ -227,18 +225,16 @@
int ret;
int i;
- comedi_set_hw_dev(dev, &pcidev->dev);
-
board = pci_8255_find_boardinfo(dev, pcidev);
if (!board)
return -ENODEV;
dev->board_ptr = board;
dev->board_name = board->name;
- ret = alloc_private(dev, sizeof(*devpriv));
- if (ret < 0)
- return ret;
- devpriv = dev->private;
+ devpriv = kzalloc(sizeof(*devpriv), GFP_KERNEL);
+ if (!devpriv)
+ return -ENOMEM;
+ dev->private = devpriv;
ret = comedi_pci_enable(pcidev, dev->board_name);
if (ret)
@@ -308,17 +304,17 @@
static struct comedi_driver pci_8255_driver = {
.driver_name = "8255_pci",
.module = THIS_MODULE,
- .attach_pci = pci_8255_attach_pci,
+ .auto_attach = pci_8255_auto_attach,
.detach = pci_8255_detach,
};
-static int __devinit pci_8255_pci_probe(struct pci_dev *dev,
+static int pci_8255_pci_probe(struct pci_dev *dev,
const struct pci_device_id *ent)
{
return comedi_pci_auto_config(dev, &pci_8255_driver);
}
-static void __devexit pci_8255_pci_remove(struct pci_dev *dev)
+static void pci_8255_pci_remove(struct pci_dev *dev)
{
comedi_pci_auto_unconfig(dev);
}
@@ -346,7 +342,7 @@
.name = "8255_pci",
.id_table = pci_8255_pci_table,
.probe = pci_8255_pci_probe,
- .remove = __devexit_p(pci_8255_pci_remove),
+ .remove = pci_8255_pci_remove,
};
module_comedi_pci_driver(pci_8255_driver, pci_8255_pci_driver);
diff --git a/drivers/staging/comedi/drivers/Makefile b/drivers/staging/comedi/drivers/Makefile
index a2787c0..0de4d2e 100644
--- a/drivers/staging/comedi/drivers/Makefile
+++ b/drivers/staging/comedi/drivers/Makefile
@@ -62,10 +62,8 @@
obj-$(CONFIG_COMEDI_ADDI_APCI_1516) += addi_apci_1516.o
obj-$(CONFIG_COMEDI_ADDI_APCI_1564) += addi_apci_1564.o
obj-$(CONFIG_COMEDI_ADDI_APCI_16XX) += addi_apci_16xx.o
-obj-$(CONFIG_COMEDI_ADDI_APCI_2016) += addi_apci_2016.o
obj-$(CONFIG_COMEDI_ADDI_APCI_2032) += addi_apci_2032.o
obj-$(CONFIG_COMEDI_ADDI_APCI_2200) += addi_apci_2200.o
-obj-$(CONFIG_COMEDI_ADDI_APCI_3001) += addi_apci_3001.o
obj-$(CONFIG_COMEDI_ADDI_APCI_3120) += addi_apci_3120.o
obj-$(CONFIG_COMEDI_ADDI_APCI_3501) += addi_apci_3501.o
obj-$(CONFIG_COMEDI_ADDI_APCI_3XXX) += addi_apci_3xxx.o
diff --git a/drivers/staging/comedi/drivers/addi-data/APCI1710_82x54.c b/drivers/staging/comedi/drivers/addi-data/APCI1710_82x54.c
index b59f2d4..d070208 100644
--- a/drivers/staging/comedi/drivers/addi-data/APCI1710_82x54.c
+++ b/drivers/staging/comedi/drivers/addi-data/APCI1710_82x54.c
@@ -18,7 +18,19 @@
| Description : APCI-1710 82X54 timer module |
*/
-#include "APCI1710_82x54.h"
+#define APCI1710_PCI_BUS_CLOCK 0
+#define APCI1710_FRONT_CONNECTOR_INPUT 1
+#define APCI1710_TIMER_READVALUE 0
+#define APCI1710_TIMER_GETOUTPUTLEVEL 1
+#define APCI1710_TIMER_GETPROGRESSSTATUS 2
+#define APCI1710_TIMER_WRITEVALUE 3
+
+#define APCI1710_TIMER_READINTERRUPT 1
+#define APCI1710_TIMER_READALLTIMER 2
+
+#ifndef APCI1710_10MHZ
+#define APCI1710_10MHZ 10
+#endif
/*
+----------------------------------------------------------------------------+
@@ -218,11 +230,12 @@
| -9: Selection from hardware gate level is wrong |
+----------------------------------------------------------------------------+
*/
-
-int i_APCI1710_InsnConfigInitTimer(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data)
+static int i_APCI1710_InsnConfigInitTimer(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
{
-
+ struct addi_private *devpriv = dev->private;
int i_ReturnValue = 0;
unsigned char b_ModulNbr;
unsigned char b_TimerNbr;
@@ -447,11 +460,12 @@
| See function "i_APCI1710_SetBoardIntRoutineX" |
+----------------------------------------------------------------------------+
*/
-
-int i_APCI1710_InsnWriteEnableDisableTimer(struct comedi_device *dev,
- struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data)
+static int i_APCI1710_InsnWriteEnableDisableTimer(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
{
+ struct addi_private *devpriv = dev->private;
int i_ReturnValue = 0;
unsigned int dw_DummyRead;
unsigned char b_ModulNbr;
@@ -589,10 +603,12 @@
| "i_APCI1710_InitTimer" |
+----------------------------------------------------------------------------+
*/
-
-int i_APCI1710_InsnReadAllTimerValue(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data)
+static int i_APCI1710_InsnReadAllTimerValue(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
{
+ struct addi_private *devpriv = dev->private;
int i_ReturnValue = 0;
unsigned char b_ModulNbr, b_ReadType;
unsigned int *pul_TimerValueArray;
@@ -668,70 +684,6 @@
/*
+----------------------------------------------------------------------------+
-| Function Name :INT i_APCI1710_InsnBitsTimer(struct comedi_device *dev,
-struct comedi_subdevice *s,struct comedi_insn *insn,unsigned int *data) |
-+----------------------------------------------------------------------------+
-| Task : Read write functions for Timer |
-+----------------------------------------------------------------------------+
-| Input Parameters :
-+----------------------------------------------------------------------------+
-| Output Parameters : - |
-+----------------------------------------------------------------------------+
-| Return Value :
-+----------------------------------------------------------------------------+
-*/
-
-int i_APCI1710_InsnBitsTimer(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data)
-{
- unsigned char b_BitsType;
- int i_ReturnValue = 0;
- b_BitsType = data[0];
-
- printk("\n82X54");
-
- switch (b_BitsType) {
- case APCI1710_TIMER_READVALUE:
- i_ReturnValue = i_APCI1710_ReadTimerValue(dev,
- (unsigned char)CR_AREF(insn->chanspec),
- (unsigned char)CR_CHAN(insn->chanspec),
- (unsigned int *) &data[0]);
- break;
-
- case APCI1710_TIMER_GETOUTPUTLEVEL:
- i_ReturnValue = i_APCI1710_GetTimerOutputLevel(dev,
- (unsigned char)CR_AREF(insn->chanspec),
- (unsigned char)CR_CHAN(insn->chanspec),
- (unsigned char *) &data[0]);
- break;
-
- case APCI1710_TIMER_GETPROGRESSSTATUS:
- i_ReturnValue = i_APCI1710_GetTimerProgressStatus(dev,
- (unsigned char)CR_AREF(insn->chanspec),
- (unsigned char)CR_CHAN(insn->chanspec),
- (unsigned char *)&data[0]);
- break;
-
- case APCI1710_TIMER_WRITEVALUE:
- i_ReturnValue = i_APCI1710_WriteTimerValue(dev,
- (unsigned char)CR_AREF(insn->chanspec),
- (unsigned char)CR_CHAN(insn->chanspec),
- (unsigned int)data[1]);
-
- break;
-
- default:
- printk("Bits Config Parameter Wrong\n");
- i_ReturnValue = -1;
- }
-
- if (i_ReturnValue >= 0)
- i_ReturnValue = insn->n;
- return i_ReturnValue;
-}
-
-/*
-+----------------------------------------------------------------------------+
| Function Name : _INT_ i_APCI1710_ReadTimerValue |
| (unsigned char_ b_BoardHandle, |
| unsigned char_ b_ModulNbr, |
@@ -759,11 +711,12 @@
| "i_APCI1710_InitTimer" |
+----------------------------------------------------------------------------+
*/
-
-int i_APCI1710_ReadTimerValue(struct comedi_device *dev,
- unsigned char b_ModulNbr, unsigned char b_TimerNbr,
- unsigned int *pul_TimerValue)
+static int i_APCI1710_ReadTimerValue(struct comedi_device *dev,
+ unsigned char b_ModulNbr,
+ unsigned char b_TimerNbr,
+ unsigned int *pul_TimerValue)
{
+ struct addi_private *devpriv = dev->private;
int i_ReturnValue = 0;
/* Test the module number */
@@ -847,11 +800,12 @@
| "i_APCI1710_InitTimer" |
+----------------------------------------------------------------------------+
*/
-
-int i_APCI1710_GetTimerOutputLevel(struct comedi_device *dev,
- unsigned char b_ModulNbr, unsigned char b_TimerNbr,
- unsigned char *pb_OutputLevel)
+static int i_APCI1710_GetTimerOutputLevel(struct comedi_device *dev,
+ unsigned char b_ModulNbr,
+ unsigned char b_TimerNbr,
+ unsigned char *pb_OutputLevel)
{
+ struct addi_private *devpriv = dev->private;
int i_ReturnValue = 0;
unsigned int dw_TimerStatus;
@@ -926,11 +880,12 @@
| "i_APCI1710_InitTimer" |
+----------------------------------------------------------------------------+
*/
-
-int i_APCI1710_GetTimerProgressStatus(struct comedi_device *dev,
- unsigned char b_ModulNbr, unsigned char b_TimerNbr,
- unsigned char *pb_TimerStatus)
+static int i_APCI1710_GetTimerProgressStatus(struct comedi_device *dev,
+ unsigned char b_ModulNbr,
+ unsigned char b_TimerNbr,
+ unsigned char *pb_TimerStatus)
{
+ struct addi_private *devpriv = dev->private;
int i_ReturnValue = 0;
unsigned int dw_TimerStatus;
@@ -1005,11 +960,12 @@
| "i_APCI1710_InitTimer" |
+----------------------------------------------------------------------------+
*/
-
-int i_APCI1710_WriteTimerValue(struct comedi_device *dev,
- unsigned char b_ModulNbr, unsigned char b_TimerNbr,
- unsigned int ul_WriteValue)
+static int i_APCI1710_WriteTimerValue(struct comedi_device *dev,
+ unsigned char b_ModulNbr,
+ unsigned char b_TimerNbr,
+ unsigned int ul_WriteValue)
{
+ struct addi_private *devpriv = dev->private;
int i_ReturnValue = 0;
/* Test the module number */
@@ -1045,3 +1001,68 @@
return i_ReturnValue;
}
+
+/*
++----------------------------------------------------------------------------+
+| Function Name :INT i_APCI1710_InsnBitsTimer(struct comedi_device *dev,
+struct comedi_subdevice *s,struct comedi_insn *insn,unsigned int *data) |
++----------------------------------------------------------------------------+
+| Task : Read write functions for Timer |
++----------------------------------------------------------------------------+
+| Input Parameters :
++----------------------------------------------------------------------------+
+| Output Parameters : - |
++----------------------------------------------------------------------------+
+| Return Value :
++----------------------------------------------------------------------------+
+*/
+static int i_APCI1710_InsnBitsTimer(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
+{
+ unsigned char b_BitsType;
+ int i_ReturnValue = 0;
+ b_BitsType = data[0];
+
+ printk("\n82X54");
+
+ switch (b_BitsType) {
+ case APCI1710_TIMER_READVALUE:
+ i_ReturnValue = i_APCI1710_ReadTimerValue(dev,
+ (unsigned char)CR_AREF(insn->chanspec),
+ (unsigned char)CR_CHAN(insn->chanspec),
+ (unsigned int *) &data[0]);
+ break;
+
+ case APCI1710_TIMER_GETOUTPUTLEVEL:
+ i_ReturnValue = i_APCI1710_GetTimerOutputLevel(dev,
+ (unsigned char)CR_AREF(insn->chanspec),
+ (unsigned char)CR_CHAN(insn->chanspec),
+ (unsigned char *) &data[0]);
+ break;
+
+ case APCI1710_TIMER_GETPROGRESSSTATUS:
+ i_ReturnValue = i_APCI1710_GetTimerProgressStatus(dev,
+ (unsigned char)CR_AREF(insn->chanspec),
+ (unsigned char)CR_CHAN(insn->chanspec),
+ (unsigned char *)&data[0]);
+ break;
+
+ case APCI1710_TIMER_WRITEVALUE:
+ i_ReturnValue = i_APCI1710_WriteTimerValue(dev,
+ (unsigned char)CR_AREF(insn->chanspec),
+ (unsigned char)CR_CHAN(insn->chanspec),
+ (unsigned int)data[1]);
+
+ break;
+
+ default:
+ printk("Bits Config Parameter Wrong\n");
+ i_ReturnValue = -1;
+ }
+
+ if (i_ReturnValue >= 0)
+ i_ReturnValue = insn->n;
+ return i_ReturnValue;
+}
diff --git a/drivers/staging/comedi/drivers/addi-data/APCI1710_82x54.h b/drivers/staging/comedi/drivers/addi-data/APCI1710_82x54.h
deleted file mode 100644
index 81346db..0000000
--- a/drivers/staging/comedi/drivers/addi-data/APCI1710_82x54.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module.
- *
- * ADDI-DATA GmbH
- * Dieselstrasse 3
- * D-77833 Ottersweier
- * Tel: +19(0)7223/9493-0
- * Fax: +49(0)7223/9493-92
- * http://www.addi-data.com
- * info@addi-data.com
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 of the License, or (at your option)
- * any later version.
- */
-
-#define APCI1710_PCI_BUS_CLOCK 0
-#define APCI1710_FRONT_CONNECTOR_INPUT 1
-#define APCI1710_TIMER_READVALUE 0
-#define APCI1710_TIMER_GETOUTPUTLEVEL 1
-#define APCI1710_TIMER_GETPROGRESSSTATUS 2
-#define APCI1710_TIMER_WRITEVALUE 3
-
-#define APCI1710_TIMER_READINTERRUPT 1
-#define APCI1710_TIMER_READALLTIMER 2
-
-/* BEGIN JK 27.10.03 : Add the possibility to use a 40 Mhz quartz */
-#ifndef APCI1710_10MHZ
-#define APCI1710_10MHZ 10
-#endif
-/* END JK 27.10.03 : Add the possibility to use a 40 Mhz quartz */
-
-/*
- * 82X54 TIMER INISIALISATION FUNCTION
- */
-int i_APCI1710_InsnConfigInitTimer(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-
-int i_APCI1710_InsnWriteEnableDisableTimer(struct comedi_device *dev,
- struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-
-/*
- * 82X54 READ FUNCTION
- */
-int i_APCI1710_InsnReadAllTimerValue(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-
-int i_APCI1710_InsnBitsTimer(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-
-/*
- * 82X54 READ & WRITE FUNCTION
- */
-int i_APCI1710_ReadTimerValue(struct comedi_device *dev,
- unsigned char b_ModulNbr, unsigned char b_TimerNbr,
- unsigned int *pul_TimerValue);
-
-int i_APCI1710_GetTimerOutputLevel(struct comedi_device *dev,
- unsigned char b_ModulNbr, unsigned char b_TimerNbr,
- unsigned char *pb_OutputLevel);
-
-int i_APCI1710_GetTimerProgressStatus(struct comedi_device *dev,
- unsigned char b_ModulNbr, unsigned char b_TimerNbr,
- unsigned char *pb_TimerStatus);
-
-/*
- * 82X54 WRITE FUNCTION
- */
-int i_APCI1710_WriteTimerValue(struct comedi_device *dev,
- unsigned char b_ModulNbr, unsigned char b_TimerNbr,
- unsigned int ul_WriteValue);
diff --git a/drivers/staging/comedi/drivers/addi-data/APCI1710_Chrono.c b/drivers/staging/comedi/drivers/addi-data/APCI1710_Chrono.c
index 482a412..5bd7fe6 100644
--- a/drivers/staging/comedi/drivers/addi-data/APCI1710_Chrono.c
+++ b/drivers/staging/comedi/drivers/addi-data/APCI1710_Chrono.c
@@ -52,12 +52,22 @@
+-----------------------------------------------------------------------+
*/
-/*
-+----------------------------------------------------------------------------+
-| Included files |
-+----------------------------------------------------------------------------+
-*/
-#include "APCI1710_Chrono.h"
+#define APCI1710_30MHZ 30
+#define APCI1710_33MHZ 33
+#define APCI1710_40MHZ 40
+
+#define APCI1710_SINGLE 0
+#define APCI1710_CONTINUOUS 1
+
+#define APCI1710_CHRONO_PROGRESS_STATUS 0
+#define APCI1710_CHRONO_READVALUE 1
+#define APCI1710_CHRONO_CONVERTVALUE 2
+#define APCI1710_CHRONO_READINTERRUPT 3
+
+#define APCI1710_CHRONO_SET_CHANNELON 0
+#define APCI1710_CHRONO_SET_CHANNELOFF 1
+#define APCI1710_CHRONO_READ_CHANNEL 2
+#define APCI1710_CHRONO_READ_PORT 3
/*
+----------------------------------------------------------------------------+
@@ -130,10 +140,12 @@
| this CHRONOS version |
+----------------------------------------------------------------------------+
*/
-
-int i_APCI1710_InsnConfigInitChrono(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data)
+static int i_APCI1710_InsnConfigInitChrono(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
{
+ struct addi_private *devpriv = dev->private;
int i_ReturnValue = 0;
unsigned int ul_TimerValue = 0;
unsigned int ul_TimingInterval = 0;
@@ -839,10 +851,12 @@
-8: data[0] wrong input |
+----------------------------------------------------------------------------+
*/
-
-int i_APCI1710_InsnWriteEnableDisableChrono(struct comedi_device *dev,
- struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
+static int i_APCI1710_InsnWriteEnableDisableChrono(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
{
+ struct addi_private *devpriv = dev->private;
int i_ReturnValue = 0;
unsigned char b_ModulNbr, b_CycleMode, b_InterruptEnable, b_Action;
b_ModulNbr = CR_AREF(insn->chanspec);
@@ -1077,87 +1091,6 @@
/*
+----------------------------------------------------------------------------+
-| Function Name :INT i_APCI1710_InsnReadChrono(struct comedi_device *dev,struct comedi_subdevice *s,
-struct comedi_insn *insn,unsigned int *data) |
-+----------------------------------------------------------------------------+
-| Task : Read functions for Timer |
-+----------------------------------------------------------------------------+
-| Input Parameters :
-+----------------------------------------------------------------------------+
-| Output Parameters : - |
-+----------------------------------------------------------------------------+
-| Return Value :
-+----------------------------------------------------------------------------+
-*/
-
-int i_APCI1710_InsnReadChrono(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data)
-{
- unsigned char b_ReadType;
- int i_ReturnValue = insn->n;
-
- b_ReadType = CR_CHAN(insn->chanspec);
-
- switch (b_ReadType) {
- case APCI1710_CHRONO_PROGRESS_STATUS:
- i_ReturnValue = i_APCI1710_GetChronoProgressStatus(dev,
- (unsigned char) CR_AREF(insn->chanspec), (unsigned char *) &data[0]);
- break;
-
- case APCI1710_CHRONO_READVALUE:
- i_ReturnValue = i_APCI1710_ReadChronoValue(dev,
- (unsigned char) CR_AREF(insn->chanspec),
- (unsigned int) insn->unused[0],
- (unsigned char *) &data[0], (unsigned int *) &data[1]);
- break;
-
- case APCI1710_CHRONO_CONVERTVALUE:
- i_ReturnValue = i_APCI1710_ConvertChronoValue(dev,
- (unsigned char) CR_AREF(insn->chanspec),
- (unsigned int) insn->unused[0],
- (unsigned int *) &data[0],
- (unsigned char *) &data[1],
- (unsigned char *) &data[2],
- (unsigned int *) &data[3],
- (unsigned int *) &data[4], (unsigned int *) &data[5]);
- break;
-
- case APCI1710_CHRONO_READINTERRUPT:
- printk("In Chrono Read Interrupt\n");
-
- data[0] = devpriv->s_InterruptParameters.
- s_FIFOInterruptParameters[devpriv->
- s_InterruptParameters.ui_Read].b_OldModuleMask;
- data[1] = devpriv->s_InterruptParameters.
- s_FIFOInterruptParameters[devpriv->
- s_InterruptParameters.ui_Read].ul_OldInterruptMask;
- data[2] = devpriv->s_InterruptParameters.
- s_FIFOInterruptParameters[devpriv->
- s_InterruptParameters.ui_Read].ul_OldCounterLatchValue;
-
- /**************************/
- /* Increment the read FIFO */
- /***************************/
-
- devpriv->
- s_InterruptParameters.
- ui_Read = (devpriv->
- s_InterruptParameters.
- ui_Read + 1) % APCI1710_SAVE_INTERRUPT;
- break;
-
- default:
- printk("ReadType Parameter wrong\n");
- }
-
- if (i_ReturnValue >= 0)
- i_ReturnValue = insn->n;
- return i_ReturnValue;
-
-}
-
-/*
-+----------------------------------------------------------------------------+
| Function Name : _INT_ i_APCI1710_GetChronoProgressStatus |
| (unsigned char_ b_BoardHandle, |
| unsigned char_ b_ModulNbr, |
@@ -1193,10 +1126,11 @@
| "i_APCI1710_InitChrono" |
+----------------------------------------------------------------------------+
*/
-
-int i_APCI1710_GetChronoProgressStatus(struct comedi_device *dev,
- unsigned char b_ModulNbr, unsigned char *pb_ChronoStatus)
+static int i_APCI1710_GetChronoProgressStatus(struct comedi_device *dev,
+ unsigned char b_ModulNbr,
+ unsigned char *pb_ChronoStatus)
{
+ struct addi_private *devpriv = dev->private;
int i_ReturnValue = 0;
unsigned int dw_Status;
@@ -1354,11 +1288,13 @@
| directly the chronometer measured timing. |
+----------------------------------------------------------------------------+
*/
-
-int i_APCI1710_ReadChronoValue(struct comedi_device *dev,
- unsigned char b_ModulNbr,
- unsigned int ui_TimeOut, unsigned char *pb_ChronoStatus, unsigned int *pul_ChronoValue)
+static int i_APCI1710_ReadChronoValue(struct comedi_device *dev,
+ unsigned char b_ModulNbr,
+ unsigned int ui_TimeOut,
+ unsigned char *pb_ChronoStatus,
+ unsigned int *pul_ChronoValue)
{
+ struct addi_private *devpriv = dev->private;
int i_ReturnValue = 0;
unsigned int dw_Status;
unsigned int dw_TimeOut = 0;
@@ -1617,15 +1553,17 @@
| "i_APCI1710_InitChrono" |
+----------------------------------------------------------------------------+
*/
-
-int i_APCI1710_ConvertChronoValue(struct comedi_device *dev,
- unsigned char b_ModulNbr,
- unsigned int ul_ChronoValue,
- unsigned int *pul_Hour,
- unsigned char *pb_Minute,
- unsigned char *pb_Second,
- unsigned int *pui_MilliSecond, unsigned int *pui_MicroSecond, unsigned int *pui_NanoSecond)
+static int i_APCI1710_ConvertChronoValue(struct comedi_device *dev,
+ unsigned char b_ModulNbr,
+ unsigned int ul_ChronoValue,
+ unsigned int *pul_Hour,
+ unsigned char *pb_Minute,
+ unsigned char *pb_Second,
+ unsigned int *pui_MilliSecond,
+ unsigned int *pui_MicroSecond,
+ unsigned int *pui_NanoSecond)
{
+ struct addi_private *devpriv = dev->private;
int i_ReturnValue = 0;
double d_Hour;
double d_Minute;
@@ -1756,6 +1694,89 @@
/*
+----------------------------------------------------------------------------+
+| Function Name :INT i_APCI1710_InsnReadChrono(struct comedi_device *dev,struct comedi_subdevice *s,
+struct comedi_insn *insn,unsigned int *data) |
++----------------------------------------------------------------------------+
+| Task : Read functions for Timer |
++----------------------------------------------------------------------------+
+| Input Parameters :
++----------------------------------------------------------------------------+
+| Output Parameters : - |
++----------------------------------------------------------------------------+
+| Return Value :
++----------------------------------------------------------------------------+
+*/
+static int i_APCI1710_InsnReadChrono(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
+{
+ struct addi_private *devpriv = dev->private;
+ unsigned char b_ReadType;
+ int i_ReturnValue = insn->n;
+
+ b_ReadType = CR_CHAN(insn->chanspec);
+
+ switch (b_ReadType) {
+ case APCI1710_CHRONO_PROGRESS_STATUS:
+ i_ReturnValue = i_APCI1710_GetChronoProgressStatus(dev,
+ (unsigned char) CR_AREF(insn->chanspec), (unsigned char *) &data[0]);
+ break;
+
+ case APCI1710_CHRONO_READVALUE:
+ i_ReturnValue = i_APCI1710_ReadChronoValue(dev,
+ (unsigned char) CR_AREF(insn->chanspec),
+ (unsigned int) insn->unused[0],
+ (unsigned char *) &data[0], (unsigned int *) &data[1]);
+ break;
+
+ case APCI1710_CHRONO_CONVERTVALUE:
+ i_ReturnValue = i_APCI1710_ConvertChronoValue(dev,
+ (unsigned char) CR_AREF(insn->chanspec),
+ (unsigned int) insn->unused[0],
+ (unsigned int *) &data[0],
+ (unsigned char *) &data[1],
+ (unsigned char *) &data[2],
+ (unsigned int *) &data[3],
+ (unsigned int *) &data[4], (unsigned int *) &data[5]);
+ break;
+
+ case APCI1710_CHRONO_READINTERRUPT:
+ printk("In Chrono Read Interrupt\n");
+
+ data[0] = devpriv->s_InterruptParameters.
+ s_FIFOInterruptParameters[devpriv->
+ s_InterruptParameters.ui_Read].b_OldModuleMask;
+ data[1] = devpriv->s_InterruptParameters.
+ s_FIFOInterruptParameters[devpriv->
+ s_InterruptParameters.ui_Read].ul_OldInterruptMask;
+ data[2] = devpriv->s_InterruptParameters.
+ s_FIFOInterruptParameters[devpriv->
+ s_InterruptParameters.ui_Read].ul_OldCounterLatchValue;
+
+ /**************************/
+ /* Increment the read FIFO */
+ /***************************/
+
+ devpriv->
+ s_InterruptParameters.
+ ui_Read = (devpriv->
+ s_InterruptParameters.
+ ui_Read + 1) % APCI1710_SAVE_INTERRUPT;
+ break;
+
+ default:
+ printk("ReadType Parameter wrong\n");
+ }
+
+ if (i_ReturnValue >= 0)
+ i_ReturnValue = insn->n;
+ return i_ReturnValue;
+
+}
+
+/*
++----------------------------------------------------------------------------+
| Function Name : int i_APCI1710_InsnBitsChronoDigitalIO(struct comedi_device *dev,struct comedi_subdevice *s,
struct comedi_insn *insn,unsigned int *data) |
+----------------------------------------------------------------------------+
@@ -1874,10 +1895,12 @@
| "i_APCI1710_InitChrono" |
+----------------------------------------------------------------------------+
*/
-
-int i_APCI1710_InsnBitsChronoDigitalIO(struct comedi_device *dev,
- struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
+static int i_APCI1710_InsnBitsChronoDigitalIO(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
{
+ struct addi_private *devpriv = dev->private;
int i_ReturnValue = 0;
unsigned char b_ModulNbr, b_OutputChannel, b_InputChannel, b_IOType;
unsigned int dw_Status;
diff --git a/drivers/staging/comedi/drivers/addi-data/APCI1710_Chrono.h b/drivers/staging/comedi/drivers/addi-data/APCI1710_Chrono.h
deleted file mode 100644
index 29bad1d..0000000
--- a/drivers/staging/comedi/drivers/addi-data/APCI1710_Chrono.h
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module.
- *
- * ADDI-DATA GmbH
- * Dieselstrasse 3
- * D-77833 Ottersweier
- * Tel: +19(0)7223/9493-0
- * Fax: +49(0)7223/9493-92
- * http://www.addi-data-com
- * info@addi-data.com
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 of the License, or (at your option)
- * any later version.
- */
-
-#define APCI1710_30MHZ 30
-#define APCI1710_33MHZ 33
-#define APCI1710_40MHZ 40
-
-#define APCI1710_SINGLE 0
-#define APCI1710_CONTINUOUS 1
-
-#define APCI1710_CHRONO_PROGRESS_STATUS 0
-#define APCI1710_CHRONO_READVALUE 1
-#define APCI1710_CHRONO_CONVERTVALUE 2
-#define APCI1710_CHRONO_READINTERRUPT 3
-
-#define APCI1710_CHRONO_SET_CHANNELON 0
-#define APCI1710_CHRONO_SET_CHANNELOFF 1
-#define APCI1710_CHRONO_READ_CHANNEL 2
-#define APCI1710_CHRONO_READ_PORT 3
-
-/*
- * CHRONOMETER INISIALISATION FUNCTION
- */
-int i_APCI1710_InsnConfigInitChrono(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-
-int i_APCI1710_InsnWriteEnableDisableChrono(struct comedi_device *dev,
- struct comedi_subdevice *s,
- struct comedi_insn *insn,
- unsigned int *data);
-
-/*
- * CHRONOMETER READ FUNCTION
- */
-int i_APCI1710_InsnReadChrono(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-
-int i_APCI1710_GetChronoProgressStatus(struct comedi_device *dev,
- unsigned char b_ModulNbr, unsigned char *pb_ChronoStatus);
-
-int i_APCI1710_ReadChronoValue(struct comedi_device *dev,
- unsigned char b_ModulNbr,
- unsigned int ui_TimeOut, unsigned char *pb_ChronoStatus,
- unsigned int *pul_ChronoValue);
-
-int i_APCI1710_ConvertChronoValue(struct comedi_device *dev,
- unsigned char b_ModulNbr,
- unsigned int ul_ChronoValue,
- unsigned int *pul_Hour,
- unsigned char *pb_Minute,
- unsigned char *pb_Second,
- unsigned int *pui_MilliSecond, unsigned int *pui_MicroSecond,
- unsigned int *pui_NanoSecond);
-
-/*
- * CHRONOMETER DIGITAL INPUT OUTPUT FUNCTION
- */
-int i_APCI1710_InsnBitsChronoDigitalIO(struct comedi_device *dev,
- struct comedi_subdevice *s, struct comedi_insn *insn,
- unsigned int *data);
diff --git a/drivers/staging/comedi/drivers/addi-data/APCI1710_Dig_io.c b/drivers/staging/comedi/drivers/addi-data/APCI1710_Dig_io.c
index 07108f9..6b38ce7 100644
--- a/drivers/staging/comedi/drivers/addi-data/APCI1710_Dig_io.c
+++ b/drivers/staging/comedi/drivers/addi-data/APCI1710_Dig_io.c
@@ -52,12 +52,16 @@
+-----------------------------------------------------------------------+
*/
-/*
-+----------------------------------------------------------------------------+
-| Included files |
-+----------------------------------------------------------------------------+
-*/
-#include "APCI1710_Dig_io.h"
+/* Digital Output ON or OFF */
+#define APCI1710_ON 1
+#define APCI1710_OFF 0
+
+/* Digital I/O */
+#define APCI1710_INPUT 0
+#define APCI1710_OUTPUT 1
+
+#define APCI1710_DIGIO_MEMORYONOFF 0x10
+#define APCI1710_DIGIO_INIT 0x11
/*
+----------------------------------------------------------------------------+
@@ -99,9 +103,12 @@
+----------------------------------------------------------------------------+
*/
-int i_APCI1710_InsnConfigDigitalIO(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data)
+static int i_APCI1710_InsnConfigDigitalIO(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
{
+ struct addi_private *devpriv = dev->private;
unsigned char b_ModulNbr, b_ChannelAMode, b_ChannelBMode;
unsigned char b_MemoryOnOff, b_ConfigType;
int i_ReturnValue = 0;
@@ -293,9 +300,12 @@
* unsigned char_ b_ModulNbr, unsigned char_ b_InputChannel,
* unsigned char *_ pb_ChannelStatus)
*/
-int i_APCI1710_InsnReadDigitalIOChlValue(struct comedi_device *dev,
- struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
+static int i_APCI1710_InsnReadDigitalIOChlValue(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
{
+ struct addi_private *devpriv = dev->private;
int i_ReturnValue = 0;
unsigned int dw_StatusReg;
unsigned char b_ModulNbr, b_InputChannel;
@@ -481,9 +491,12 @@
* _INT_ i_APCI1710_SetDigitalIOChlOn (unsigned char_ b_BoardHandle,
* unsigned char_ b_ModulNbr, unsigned char_ b_OutputChannel)
*/
-int i_APCI1710_InsnWriteDigitalIOChlOnOff(struct comedi_device *dev,
- struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
+static int i_APCI1710_InsnWriteDigitalIOChlOnOff(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
{
+ struct addi_private *devpriv = dev->private;
int i_ReturnValue = 0;
unsigned int dw_WriteValue = 0;
unsigned char b_ModulNbr, b_OutputChannel;
@@ -731,9 +744,12 @@
* b_BoardHandle, unsigned char_ b_ModulNbr, unsigned char_
* b_PortValue)
*/
-int i_APCI1710_InsnBitsDigitalIOPortOnOff(struct comedi_device *dev,
- struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
+static int i_APCI1710_InsnBitsDigitalIOPortOnOff(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
{
+ struct addi_private *devpriv = dev->private;
int i_ReturnValue = 0;
unsigned int dw_WriteValue = 0;
unsigned int dw_StatusReg;
diff --git a/drivers/staging/comedi/drivers/addi-data/APCI1710_Dig_io.h b/drivers/staging/comedi/drivers/addi-data/APCI1710_Dig_io.h
deleted file mode 100644
index cc3973d..0000000
--- a/drivers/staging/comedi/drivers/addi-data/APCI1710_Dig_io.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module.
- *
- * ADDI-DATA GmbH
- * Dieselstrasse 3
- * D-77833 Ottersweier
- * Tel: +19(0)7223/9493-0
- * Fax: +49(0)7223/9493-92
- * http://www.addi-data.com
- * info@addi-data.com
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 of the License, or (at your option)
- * any later version.
- */
-
-#define APCI1710_ON 1 /* Digital Output ON or OFF */
-#define APCI1710_OFF 0
-
-#define APCI1710_INPUT 0 /* Digital I/O */
-#define APCI1710_OUTPUT 1
-
-#define APCI1710_DIGIO_MEMORYONOFF 0x10
-#define APCI1710_DIGIO_INIT 0x11
-
-/*
- * DIGITAL I/O INISIALISATION FUNCTION
- */
-int i_APCI1710_InsnConfigDigitalIO(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-
-/*
- * INPUT OUTPUT FUNCTIONS
- */
-int i_APCI1710_InsnReadDigitalIOChlValue(struct comedi_device *dev,
- struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-
-int i_APCI1710_InsnWriteDigitalIOChlOnOff(struct comedi_device *dev,
- struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-
-int i_APCI1710_InsnBitsDigitalIOPortOnOff(struct comedi_device *dev,
- struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
diff --git a/drivers/staging/comedi/drivers/addi-data/APCI1710_INCCPT.c b/drivers/staging/comedi/drivers/addi-data/APCI1710_INCCPT.c
index 14b13ea..70a7f95 100644
--- a/drivers/staging/comedi/drivers/addi-data/APCI1710_INCCPT.c
+++ b/drivers/staging/comedi/drivers/addi-data/APCI1710_INCCPT.c
@@ -51,93 +51,121 @@
+-----------------------------------------------------------------------+
*/
-/*
-+----------------------------------------------------------------------------+
-| Included files |
-+----------------------------------------------------------------------------+
-*/
+#define APCI1710_16BIT_COUNTER 0x10
+#define APCI1710_32BIT_COUNTER 0x0
+#define APCI1710_QUADRUPLE_MODE 0x0
+#define APCI1710_DOUBLE_MODE 0x3
+#define APCI1710_SIMPLE_MODE 0xF
+#define APCI1710_DIRECT_MODE 0x80
+#define APCI1710_HYSTERESIS_ON 0x60
+#define APCI1710_HYSTERESIS_OFF 0x0
+#define APCI1710_INCREMENT 0x60
+#define APCI1710_DECREMENT 0x0
+#define APCI1710_LATCH_COUNTER 0x1
+#define APCI1710_CLEAR_COUNTER 0x0
+#define APCI1710_LOW 0x0
+#define APCI1710_HIGH 0x1
-#include "APCI1710_INCCPT.h"
+/*********************/
+/* Version 0600-0229 */
+/*********************/
+#define APCI1710_HIGH_EDGE_CLEAR_COUNTER 0x0
+#define APCI1710_HIGH_EDGE_LATCH_COUNTER 0x1
+#define APCI1710_LOW_EDGE_CLEAR_COUNTER 0x2
+#define APCI1710_LOW_EDGE_LATCH_COUNTER 0x3
+#define APCI1710_HIGH_EDGE_LATCH_AND_CLEAR_COUNTER 0x4
+#define APCI1710_LOW_EDGE_LATCH_AND_CLEAR_COUNTER 0x5
+#define APCI1710_SOURCE_0 0x0
+#define APCI1710_SOURCE_1 0x1
-/*
-+----------------------------------------------------------------------------+
-| int i_APCI1710_InsnConfigINCCPT(struct comedi_device *dev,struct comedi_subdevice *s,
-struct comedi_insn *insn,unsigned int *data)
+#define APCI1710_30MHZ 30
+#define APCI1710_33MHZ 33
+#define APCI1710_40MHZ 40
-+----------------------------------------------------------------------------+
-| Task : Configuration function for INC_CPT |
-+----------------------------------------------------------------------------+
-| Input Parameters : |
-+----------------------------------------------------------------------------+
-| Output Parameters : *data
-+----------------------------------------------------------------------------+
-| Return Value : |
-+----------------------------------------------------------------------------+
-*/
+#define APCI1710_ENABLE_LATCH_INT 0x80
+#define APCI1710_DISABLE_LATCH_INT (~APCI1710_ENABLE_LATCH_INT)
-int i_APCI1710_InsnConfigINCCPT(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data)
-{
- unsigned int ui_ConfigType;
- int i_ReturnValue = 0;
- ui_ConfigType = CR_CHAN(insn->chanspec);
+#define APCI1710_INDEX_LATCH_COUNTER 0x10
+#define APCI1710_INDEX_AUTO_MODE 0x8
+#define APCI1710_ENABLE_INDEX 0x4
+#define APCI1710_DISABLE_INDEX (~APCI1710_ENABLE_INDEX)
+#define APCI1710_ENABLE_LATCH_AND_CLEAR 0x8
+#define APCI1710_DISABLE_LATCH_AND_CLEAR (~APCI1710_ENABLE_LATCH_AND_CLEAR)
+#define APCI1710_SET_LOW_INDEX_LEVEL 0x4
+#define APCI1710_SET_HIGH_INDEX_LEVEL (~APCI1710_SET_LOW_INDEX_LEVEL)
+#define APCI1710_INVERT_INDEX_RFERENCE 0x2
+#define APCI1710_DEFAULT_INDEX_RFERENCE (~APCI1710_INVERT_INDEX_RFERENCE)
- printk("\nINC_CPT");
+#define APCI1710_ENABLE_INDEX_INT 0x1
+#define APCI1710_DISABLE_INDEX_INT (~APCI1710_ENABLE_INDEX_INT)
- devpriv->tsk_Current = current; /* Save the current process task structure */
- switch (ui_ConfigType) {
- case APCI1710_INCCPT_INITCOUNTER:
- i_ReturnValue = i_APCI1710_InitCounter(dev,
- CR_AREF(insn->chanspec),
- (unsigned char) data[0],
- (unsigned char) data[1],
- (unsigned char) data[2], (unsigned char) data[3], (unsigned char) data[4]);
- break;
+#define APCI1710_ENABLE_FREQUENCY 0x4
+#define APCI1710_DISABLE_FREQUENCY (~APCI1710_ENABLE_FREQUENCY)
- case APCI1710_INCCPT_COUNTERAUTOTEST:
- i_ReturnValue = i_APCI1710_CounterAutoTest(dev,
- (unsigned char *) &data[0]);
- break;
+#define APCI1710_ENABLE_FREQUENCY_INT 0x8
+#define APCI1710_DISABLE_FREQUENCY_INT (~APCI1710_ENABLE_FREQUENCY_INT)
- case APCI1710_INCCPT_INITINDEX:
- i_ReturnValue = i_APCI1710_InitIndex(dev,
- CR_AREF(insn->chanspec),
- (unsigned char) data[0],
- (unsigned char) data[1], (unsigned char) data[2], (unsigned char) data[3]);
- break;
+#define APCI1710_ENABLE_40MHZ_FREQUENCY 0x40
+#define APCI1710_DISABLE_40MHZ_FREQUENCY (~APCI1710_ENABLE_40MHZ_FREQUENCY)
- case APCI1710_INCCPT_INITREFERENCE:
- i_ReturnValue = i_APCI1710_InitReference(dev,
- CR_AREF(insn->chanspec), (unsigned char) data[0]);
- break;
+#define APCI1710_ENABLE_40MHZ_FILTER 0x80
+#define APCI1710_DISABLE_40MHZ_FILTER (~APCI1710_ENABLE_40MHZ_FILTER)
- case APCI1710_INCCPT_INITEXTERNALSTROBE:
- i_ReturnValue = i_APCI1710_InitExternalStrobe(dev,
- CR_AREF(insn->chanspec),
- (unsigned char) data[0], (unsigned char) data[1]);
- break;
+#define APCI1710_ENABLE_COMPARE_INT 0x2
+#define APCI1710_DISABLE_COMPARE_INT (~APCI1710_ENABLE_COMPARE_INT)
- case APCI1710_INCCPT_INITCOMPARELOGIC:
- i_ReturnValue = i_APCI1710_InitCompareLogic(dev,
- CR_AREF(insn->chanspec), (unsigned int) data[0]);
- break;
+#define APCI1710_ENABLE_INDEX_ACTION 0x20
+#define APCI1710_DISABLE_INDEX_ACTION (~APCI1710_ENABLE_INDEX_ACTION)
+#define APCI1710_REFERENCE_HIGH 0x40
+#define APCI1710_REFERENCE_LOW (~APCI1710_REFERENCE_HIGH)
- case APCI1710_INCCPT_INITFREQUENCYMEASUREMENT:
- i_ReturnValue = i_APCI1710_InitFrequencyMeasurement(dev,
- CR_AREF(insn->chanspec),
- (unsigned char) data[0],
- (unsigned char) data[1], (unsigned int) data[2], (unsigned int *) &data[0]);
- break;
+#define APCI1710_TOR_GATE_LOW 0x40
+#define APCI1710_TOR_GATE_HIGH (~APCI1710_TOR_GATE_LOW)
- default:
- printk("Insn Config : Config Parameter Wrong\n");
+/* INSN CONFIG */
+#define APCI1710_INCCPT_INITCOUNTER 100
+#define APCI1710_INCCPT_COUNTERAUTOTEST 101
+#define APCI1710_INCCPT_INITINDEX 102
+#define APCI1710_INCCPT_INITREFERENCE 103
+#define APCI1710_INCCPT_INITEXTERNALSTROBE 104
+#define APCI1710_INCCPT_INITCOMPARELOGIC 105
+#define APCI1710_INCCPT_INITFREQUENCYMEASUREMENT 106
- }
+/* INSN READ */
+#define APCI1710_INCCPT_READLATCHREGISTERSTATUS 200
+#define APCI1710_INCCPT_READLATCHREGISTERVALUE 201
+#define APCI1710_INCCPT_READ16BITCOUNTERVALUE 202
+#define APCI1710_INCCPT_READ32BITCOUNTERVALUE 203
+#define APCI1710_INCCPT_GETINDEXSTATUS 204
+#define APCI1710_INCCPT_GETREFERENCESTATUS 205
+#define APCI1710_INCCPT_GETUASSTATUS 206
+#define APCI1710_INCCPT_GETCBSTATUS 207
+#define APCI1710_INCCPT_GET16BITCBSTATUS 208
+#define APCI1710_INCCPT_GETUDSTATUS 209
+#define APCI1710_INCCPT_GETINTERRUPTUDLATCHEDSTATUS 210
+#define APCI1710_INCCPT_READFREQUENCYMEASUREMENT 211
+#define APCI1710_INCCPT_READINTERRUPT 212
- if (i_ReturnValue >= 0)
- i_ReturnValue = insn->n;
- return i_ReturnValue;
-}
+/* INSN BITS */
+#define APCI1710_INCCPT_CLEARCOUNTERVALUE 300
+#define APCI1710_INCCPT_CLEARALLCOUNTERVALUE 301
+#define APCI1710_INCCPT_SETINPUTFILTER 302
+#define APCI1710_INCCPT_LATCHCOUNTER 303
+#define APCI1710_INCCPT_SETINDEXANDREFERENCESOURCE 304
+#define APCI1710_INCCPT_SETDIGITALCHLON 305
+#define APCI1710_INCCPT_SETDIGITALCHLOFF 306
+
+/* INSN WRITE */
+#define APCI1710_INCCPT_ENABLELATCHINTERRUPT 400
+#define APCI1710_INCCPT_DISABLELATCHINTERRUPT 401
+#define APCI1710_INCCPT_WRITE16BITCOUNTERVALUE 402
+#define APCI1710_INCCPT_WRITE32BITCOUNTERVALUE 403
+#define APCI1710_INCCPT_ENABLEINDEX 404
+#define APCI1710_INCCPT_DISABLEINDEX 405
+#define APCI1710_INCCPT_ENABLECOMPARELOGIC 406
+#define APCI1710_INCCPT_DISABLECOMPARELOGIC 407
+#define APCI1710_INCCPT_ENABLEFREQUENCYMEASUREMENT 408
+#define APCI1710_INCCPT_DISABLEFREQUENCYMEASUREMENT 409
/*
+----------------------------------------------------------------------------+
@@ -298,14 +326,15 @@
| wrong. |
+----------------------------------------------------------------------------+
*/
-
-int i_APCI1710_InitCounter(struct comedi_device *dev,
- unsigned char b_ModulNbr,
- unsigned char b_CounterRange,
- unsigned char b_FirstCounterModus,
- unsigned char b_FirstCounterOption,
- unsigned char b_SecondCounterModus, unsigned char b_SecondCounterOption)
+static int i_APCI1710_InitCounter(struct comedi_device *dev,
+ unsigned char b_ModulNbr,
+ unsigned char b_CounterRange,
+ unsigned char b_FirstCounterModus,
+ unsigned char b_FirstCounterOption,
+ unsigned char b_SecondCounterModus,
+ unsigned char b_SecondCounterOption)
{
+ struct addi_private *devpriv = dev->private;
int i_ReturnValue = 0;
/*******************************/
@@ -544,9 +573,10 @@
| -2: No counter module found |
+----------------------------------------------------------------------------+
*/
-
-int i_APCI1710_CounterAutoTest(struct comedi_device *dev, unsigned char *pb_TestStatus)
+static int i_APCI1710_CounterAutoTest(struct comedi_device *dev,
+ unsigned char *pb_TestStatus)
{
+ struct addi_private *devpriv = dev->private;
unsigned char b_ModulCpt = 0;
int i_ReturnValue = 0;
unsigned int dw_LathchValue;
@@ -707,12 +737,14 @@
| See function "i_APCI1710_SetBoardIntRoutineX" |
+----------------------------------------------------------------------------+
*/
-
-int i_APCI1710_InitIndex(struct comedi_device *dev,
- unsigned char b_ModulNbr,
- unsigned char b_ReferenceAction,
- unsigned char b_IndexOperation, unsigned char b_AutoMode, unsigned char b_InterruptEnable)
+static int i_APCI1710_InitIndex(struct comedi_device *dev,
+ unsigned char b_ModulNbr,
+ unsigned char b_ReferenceAction,
+ unsigned char b_IndexOperation,
+ unsigned char b_AutoMode,
+ unsigned char b_InterruptEnable)
{
+ struct addi_private *devpriv = dev->private;
int i_ReturnValue = 0;
/**************************/
@@ -1151,10 +1183,11 @@
| -4: Reference level parameter is wrong |
+----------------------------------------------------------------------------+
*/
-
-int i_APCI1710_InitReference(struct comedi_device *dev,
- unsigned char b_ModulNbr, unsigned char b_ReferenceLevel)
+static int i_APCI1710_InitReference(struct comedi_device *dev,
+ unsigned char b_ModulNbr,
+ unsigned char b_ReferenceLevel)
{
+ struct addi_private *devpriv = dev->private;
int i_ReturnValue = 0;
/**************************/
@@ -1276,10 +1309,12 @@
| -5: External strobe level parameter is wrong |
+----------------------------------------------------------------------------+
*/
-
-int i_APCI1710_InitExternalStrobe(struct comedi_device *dev,
- unsigned char b_ModulNbr, unsigned char b_ExternalStrobe, unsigned char b_ExternalStrobeLevel)
+static int i_APCI1710_InitExternalStrobe(struct comedi_device *dev,
+ unsigned char b_ModulNbr,
+ unsigned char b_ExternalStrobe,
+ unsigned char b_ExternalStrobeLevel)
{
+ struct addi_private *devpriv = dev->private;
int i_ReturnValue = 0;
/**************************/
@@ -1390,10 +1425,11 @@
| "i_APCI1710_InitCounter" |
+----------------------------------------------------------------------------+
*/
-
-int i_APCI1710_InitCompareLogic(struct comedi_device *dev,
- unsigned char b_ModulNbr, unsigned int ui_CompareValue)
+static int i_APCI1710_InitCompareLogic(struct comedi_device *dev,
+ unsigned char b_ModulNbr,
+ unsigned int ui_CompareValue)
{
+ struct addi_private *devpriv = dev->private;
int i_ReturnValue = 0;
/**************************/
@@ -1486,13 +1522,14 @@
| -7: 40MHz quartz not on board |
+----------------------------------------------------------------------------+
*/
-
-int i_APCI1710_InitFrequencyMeasurement(struct comedi_device *dev,
- unsigned char b_ModulNbr,
- unsigned char b_PCIInputClock,
- unsigned char b_TimingUnity,
- unsigned int ul_TimingInterval, unsigned int *pul_RealTimingInterval)
+static int i_APCI1710_InitFrequencyMeasurement(struct comedi_device *dev,
+ unsigned char b_ModulNbr,
+ unsigned char b_PCIInputClock,
+ unsigned char b_TimingUnity,
+ unsigned int ul_TimingInterval,
+ unsigned int *pul_RealTimingInterval)
{
+ struct addi_private *devpriv = dev->private;
int i_ReturnValue = 0;
unsigned int ul_TimerValue = 0;
double d_RealTimingInterval;
@@ -1995,72 +2032,70 @@
return i_ReturnValue;
}
-/*########################################################################### */
-
- /* INSN BITS */
-/*########################################################################### */
-
/*
-+----------------------------------------------------------------------------+
-| Function Name :INT i_APCI1710_InsnBitsINCCPT(struct comedi_device *dev,struct comedi_subdevice *s,
-struct comedi_insn *insn,unsigned int *data) |
-+----------------------------------------------------------------------------+
-| Task : Set & Clear Functions for INC_CPT |
-+----------------------------------------------------------------------------+
-| Input Parameters :
-+----------------------------------------------------------------------------+
-| Output Parameters : - |
-+----------------------------------------------------------------------------+
-| Return Value :
-+----------------------------------------------------------------------------+
-*/
-
-int i_APCI1710_InsnBitsINCCPT(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data)
+ * Configuration function for INC_CPT
+ */
+static int i_APCI1710_InsnConfigINCCPT(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
{
- unsigned int ui_BitsType;
+ struct addi_private *devpriv = dev->private;
+ unsigned int ui_ConfigType;
int i_ReturnValue = 0;
- ui_BitsType = CR_CHAN(insn->chanspec);
+
+ ui_ConfigType = CR_CHAN(insn->chanspec);
+
+ printk("\nINC_CPT");
+
devpriv->tsk_Current = current; /* Save the current process task structure */
-
- switch (ui_BitsType) {
- case APCI1710_INCCPT_CLEARCOUNTERVALUE:
- i_ReturnValue = i_APCI1710_ClearCounterValue(dev,
- (unsigned char) CR_AREF(insn->chanspec));
+ switch (ui_ConfigType) {
+ case APCI1710_INCCPT_INITCOUNTER:
+ i_ReturnValue = i_APCI1710_InitCounter(dev,
+ CR_AREF(insn->chanspec),
+ (unsigned char) data[0],
+ (unsigned char) data[1],
+ (unsigned char) data[2], (unsigned char) data[3], (unsigned char) data[4]);
break;
- case APCI1710_INCCPT_CLEARALLCOUNTERVALUE:
- i_ReturnValue = i_APCI1710_ClearAllCounterValue(dev);
+ case APCI1710_INCCPT_COUNTERAUTOTEST:
+ i_ReturnValue = i_APCI1710_CounterAutoTest(dev,
+ (unsigned char *) &data[0]);
break;
- case APCI1710_INCCPT_SETINPUTFILTER:
- i_ReturnValue = i_APCI1710_SetInputFilter(dev,
- (unsigned char) CR_AREF(insn->chanspec),
+ case APCI1710_INCCPT_INITINDEX:
+ i_ReturnValue = i_APCI1710_InitIndex(dev,
+ CR_AREF(insn->chanspec),
+ (unsigned char) data[0],
+ (unsigned char) data[1], (unsigned char) data[2], (unsigned char) data[3]);
+ break;
+
+ case APCI1710_INCCPT_INITREFERENCE:
+ i_ReturnValue = i_APCI1710_InitReference(dev,
+ CR_AREF(insn->chanspec), (unsigned char) data[0]);
+ break;
+
+ case APCI1710_INCCPT_INITEXTERNALSTROBE:
+ i_ReturnValue = i_APCI1710_InitExternalStrobe(dev,
+ CR_AREF(insn->chanspec),
(unsigned char) data[0], (unsigned char) data[1]);
break;
- case APCI1710_INCCPT_LATCHCOUNTER:
- i_ReturnValue = i_APCI1710_LatchCounter(dev,
- (unsigned char) CR_AREF(insn->chanspec), (unsigned char) data[0]);
+ case APCI1710_INCCPT_INITCOMPARELOGIC:
+ i_ReturnValue = i_APCI1710_InitCompareLogic(dev,
+ CR_AREF(insn->chanspec), (unsigned int) data[0]);
break;
- case APCI1710_INCCPT_SETINDEXANDREFERENCESOURCE:
- i_ReturnValue = i_APCI1710_SetIndexAndReferenceSource(dev,
- (unsigned char) CR_AREF(insn->chanspec), (unsigned char) data[0]);
- break;
-
- case APCI1710_INCCPT_SETDIGITALCHLON:
- i_ReturnValue = i_APCI1710_SetDigitalChlOn(dev,
- (unsigned char) CR_AREF(insn->chanspec));
- break;
-
- case APCI1710_INCCPT_SETDIGITALCHLOFF:
- i_ReturnValue = i_APCI1710_SetDigitalChlOff(dev,
- (unsigned char) CR_AREF(insn->chanspec));
+ case APCI1710_INCCPT_INITFREQUENCYMEASUREMENT:
+ i_ReturnValue = i_APCI1710_InitFrequencyMeasurement(dev,
+ CR_AREF(insn->chanspec),
+ (unsigned char) data[0],
+ (unsigned char) data[1], (unsigned int) data[2], (unsigned int *) &data[0]);
break;
default:
- printk("Bits Config Parameter Wrong\n");
+ printk("Insn Config : Config Parameter Wrong\n");
+
}
if (i_ReturnValue >= 0)
@@ -2090,9 +2125,10 @@
| "i_APCI1710_InitCounter" |
+----------------------------------------------------------------------------+
*/
-
-int i_APCI1710_ClearCounterValue(struct comedi_device *dev, unsigned char b_ModulNbr)
+static int i_APCI1710_ClearCounterValue(struct comedi_device *dev,
+ unsigned char b_ModulNbr)
{
+ struct addi_private *devpriv = dev->private;
int i_ReturnValue = 0;
/**************************/
@@ -2150,9 +2186,9 @@
| -2: No counter module found |
+----------------------------------------------------------------------------+
*/
-
-int i_APCI1710_ClearAllCounterValue(struct comedi_device *dev)
+static int i_APCI1710_ClearAllCounterValue(struct comedi_device *dev)
{
+ struct addi_private *devpriv = dev->private;
unsigned char b_ModulCpt = 0;
int i_ReturnValue = 0;
@@ -2296,10 +2332,12 @@
| -6: 40MHz quartz not on board |
+----------------------------------------------------------------------------+
*/
-
-int i_APCI1710_SetInputFilter(struct comedi_device *dev,
- unsigned char b_ModulNbr, unsigned char b_PCIInputClock, unsigned char b_Filter)
+static int i_APCI1710_SetInputFilter(struct comedi_device *dev,
+ unsigned char b_ModulNbr,
+ unsigned char b_PCIInputClock,
+ unsigned char b_Filter)
{
+ struct addi_private *devpriv = dev->private;
int i_ReturnValue = 0;
unsigned int dw_Status = 0;
@@ -2560,10 +2598,11 @@
| -4: The selected latch register parameter is wrong |
+----------------------------------------------------------------------------+
*/
-
-int i_APCI1710_LatchCounter(struct comedi_device *dev,
- unsigned char b_ModulNbr, unsigned char b_LatchReg)
+static int i_APCI1710_LatchCounter(struct comedi_device *dev,
+ unsigned char b_ModulNbr,
+ unsigned char b_LatchReg)
{
+ struct addi_private *devpriv = dev->private;
int i_ReturnValue = 0;
/**************************/
@@ -2657,10 +2696,11 @@
| -4: The source selection is wrong |
+----------------------------------------------------------------------------+
*/
-
-int i_APCI1710_SetIndexAndReferenceSource(struct comedi_device *dev,
- unsigned char b_ModulNbr, unsigned char b_SourceSelection)
+static int i_APCI1710_SetIndexAndReferenceSource(struct comedi_device *dev,
+ unsigned char b_ModulNbr,
+ unsigned char b_SourceSelection)
{
+ struct addi_private *devpriv = dev->private;
int i_ReturnValue = 0;
/**************************/
@@ -2794,9 +2834,10 @@
| "i_APCI1710_InitCounter" |
+----------------------------------------------------------------------------+
*/
-
-int i_APCI1710_SetDigitalChlOn(struct comedi_device *dev, unsigned char b_ModulNbr)
+static int i_APCI1710_SetDigitalChlOn(struct comedi_device *dev,
+ unsigned char b_ModulNbr)
{
+ struct addi_private *devpriv = dev->private;
int i_ReturnValue = 0;
/**************************/
@@ -2874,9 +2915,10 @@
| "i_APCI1710_InitCounter" |
+----------------------------------------------------------------------------+
*/
-
-int i_APCI1710_SetDigitalChlOff(struct comedi_device *dev, unsigned char b_ModulNbr)
+static int i_APCI1710_SetDigitalChlOff(struct comedi_device *dev,
+ unsigned char b_ModulNbr)
{
+ struct addi_private *devpriv = dev->private;
int i_ReturnValue = 0;
/**************************/
@@ -2932,88 +2974,59 @@
return i_ReturnValue;
}
-/*########################################################################### */
-
- /* INSN WRITE */
-/*########################################################################### */
-
/*
-+----------------------------------------------------------------------------+
-| Function Name :INT i_APCI1710_InsnWriteINCCPT(struct comedi_device *dev,struct comedi_subdevice *s,
-struct comedi_insn *insn,unsigned int *data) |
-+----------------------------------------------------------------------------+
-| Task : Enable Disable functions for INC_CPT |
-+----------------------------------------------------------------------------+
-| Input Parameters :
-+----------------------------------------------------------------------------+
-| Output Parameters : - |
-+----------------------------------------------------------------------------+
-| Return Value :
-+----------------------------------------------------------------------------+
-*/
-int i_APCI1710_InsnWriteINCCPT(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data)
+ * Set & Clear Functions for INC_CPT
+ */
+static int i_APCI1710_InsnBitsINCCPT(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
{
- unsigned int ui_WriteType;
+ struct addi_private *devpriv = dev->private;
+ unsigned int ui_BitsType;
int i_ReturnValue = 0;
- ui_WriteType = CR_CHAN(insn->chanspec);
+ ui_BitsType = CR_CHAN(insn->chanspec);
devpriv->tsk_Current = current; /* Save the current process task structure */
- switch (ui_WriteType) {
- case APCI1710_INCCPT_ENABLELATCHINTERRUPT:
- i_ReturnValue = i_APCI1710_EnableLatchInterrupt(dev,
+ switch (ui_BitsType) {
+ case APCI1710_INCCPT_CLEARCOUNTERVALUE:
+ i_ReturnValue = i_APCI1710_ClearCounterValue(dev,
(unsigned char) CR_AREF(insn->chanspec));
break;
- case APCI1710_INCCPT_DISABLELATCHINTERRUPT:
- i_ReturnValue = i_APCI1710_DisableLatchInterrupt(dev,
- (unsigned char) CR_AREF(insn->chanspec));
+ case APCI1710_INCCPT_CLEARALLCOUNTERVALUE:
+ i_ReturnValue = i_APCI1710_ClearAllCounterValue(dev);
break;
- case APCI1710_INCCPT_WRITE16BITCOUNTERVALUE:
- i_ReturnValue = i_APCI1710_Write16BitCounterValue(dev,
+ case APCI1710_INCCPT_SETINPUTFILTER:
+ i_ReturnValue = i_APCI1710_SetInputFilter(dev,
(unsigned char) CR_AREF(insn->chanspec),
- (unsigned char) data[0], (unsigned int) data[1]);
+ (unsigned char) data[0], (unsigned char) data[1]);
break;
- case APCI1710_INCCPT_WRITE32BITCOUNTERVALUE:
- i_ReturnValue = i_APCI1710_Write32BitCounterValue(dev,
- (unsigned char) CR_AREF(insn->chanspec), (unsigned int) data[0]);
-
- break;
-
- case APCI1710_INCCPT_ENABLEINDEX:
- i_APCI1710_EnableIndex(dev, (unsigned char) CR_AREF(insn->chanspec));
- break;
-
- case APCI1710_INCCPT_DISABLEINDEX:
- i_ReturnValue = i_APCI1710_DisableIndex(dev,
- (unsigned char) CR_AREF(insn->chanspec));
- break;
-
- case APCI1710_INCCPT_ENABLECOMPARELOGIC:
- i_ReturnValue = i_APCI1710_EnableCompareLogic(dev,
- (unsigned char) CR_AREF(insn->chanspec));
- break;
-
- case APCI1710_INCCPT_DISABLECOMPARELOGIC:
- i_ReturnValue = i_APCI1710_DisableCompareLogic(dev,
- (unsigned char) CR_AREF(insn->chanspec));
- break;
-
- case APCI1710_INCCPT_ENABLEFREQUENCYMEASUREMENT:
- i_ReturnValue = i_APCI1710_EnableFrequencyMeasurement(dev,
+ case APCI1710_INCCPT_LATCHCOUNTER:
+ i_ReturnValue = i_APCI1710_LatchCounter(dev,
(unsigned char) CR_AREF(insn->chanspec), (unsigned char) data[0]);
break;
- case APCI1710_INCCPT_DISABLEFREQUENCYMEASUREMENT:
- i_ReturnValue = i_APCI1710_DisableFrequencyMeasurement(dev,
+ case APCI1710_INCCPT_SETINDEXANDREFERENCESOURCE:
+ i_ReturnValue = i_APCI1710_SetIndexAndReferenceSource(dev,
+ (unsigned char) CR_AREF(insn->chanspec), (unsigned char) data[0]);
+ break;
+
+ case APCI1710_INCCPT_SETDIGITALCHLON:
+ i_ReturnValue = i_APCI1710_SetDigitalChlOn(dev,
+ (unsigned char) CR_AREF(insn->chanspec));
+ break;
+
+ case APCI1710_INCCPT_SETDIGITALCHLOFF:
+ i_ReturnValue = i_APCI1710_SetDigitalChlOff(dev,
(unsigned char) CR_AREF(insn->chanspec));
break;
default:
- printk("Write Config Parameter Wrong\n");
+ printk("Bits Config Parameter Wrong\n");
}
if (i_ReturnValue >= 0)
@@ -3046,9 +3059,10 @@
| "i_APCI1710_SetBoardIntRoutine" |
+----------------------------------------------------------------------------+
*/
-
-int i_APCI1710_EnableLatchInterrupt(struct comedi_device *dev, unsigned char b_ModulNbr)
+static int i_APCI1710_EnableLatchInterrupt(struct comedi_device *dev,
+ unsigned char b_ModulNbr)
{
+ struct addi_private *devpriv = dev->private;
int i_ReturnValue = 0;
/**************************/
@@ -3132,9 +3146,10 @@
| "i_APCI1710_SetBoardIntRoutine" |
+----------------------------------------------------------------------------+
*/
-
-int i_APCI1710_DisableLatchInterrupt(struct comedi_device *dev, unsigned char b_ModulNbr)
+static int i_APCI1710_DisableLatchInterrupt(struct comedi_device *dev,
+ unsigned char b_ModulNbr)
{
+ struct addi_private *devpriv = dev->private;
int i_ReturnValue = 0;
/**************************/
@@ -3230,10 +3245,12 @@
| -4: The selected 16-Bit counter parameter is wrong |
+----------------------------------------------------------------------------+
*/
-
-int i_APCI1710_Write16BitCounterValue(struct comedi_device *dev,
- unsigned char b_ModulNbr, unsigned char b_SelectedCounter, unsigned int ui_WriteValue)
+static int i_APCI1710_Write16BitCounterValue(struct comedi_device *dev,
+ unsigned char b_ModulNbr,
+ unsigned char b_SelectedCounter,
+ unsigned int ui_WriteValue)
{
+ struct addi_private *devpriv = dev->private;
int i_ReturnValue = 0;
/**************************/
@@ -3315,10 +3332,11 @@
| "i_APCI1710_InitCounter" |
+----------------------------------------------------------------------------+
*/
-
-int i_APCI1710_Write32BitCounterValue(struct comedi_device *dev,
- unsigned char b_ModulNbr, unsigned int ul_WriteValue)
+static int i_APCI1710_Write32BitCounterValue(struct comedi_device *dev,
+ unsigned char b_ModulNbr,
+ unsigned int ul_WriteValue)
{
+ struct addi_private *devpriv = dev->private;
int i_ReturnValue = 0;
/**************************/
@@ -3382,9 +3400,10 @@
| "i_APCI1710_InitIndex" |
+----------------------------------------------------------------------------+
*/
-
-int i_APCI1710_EnableIndex(struct comedi_device *dev, unsigned char b_ModulNbr)
+static int i_APCI1710_EnableIndex(struct comedi_device *dev,
+ unsigned char b_ModulNbr)
{
+ struct addi_private *devpriv = dev->private;
int i_ReturnValue = 0;
unsigned int ul_InterruptLatchReg;
@@ -3480,9 +3499,10 @@
| "i_APCI1710_InitIndex" |
+----------------------------------------------------------------------------+
*/
-
-int i_APCI1710_DisableIndex(struct comedi_device *dev, unsigned char b_ModulNbr)
+static int i_APCI1710_DisableIndex(struct comedi_device *dev,
+ unsigned char b_ModulNbr)
{
+ struct addi_private *devpriv = dev->private;
int i_ReturnValue = 0;
/**************************/
@@ -3579,9 +3599,10 @@
| See function "i_APCI1710_SetBoardIntRoutineX" |
+----------------------------------------------------------------------------+
*/
-
-int i_APCI1710_EnableCompareLogic(struct comedi_device *dev, unsigned char b_ModulNbr)
+static int i_APCI1710_EnableCompareLogic(struct comedi_device *dev,
+ unsigned char b_ModulNbr)
{
+ struct addi_private *devpriv = dev->private;
int i_ReturnValue = 0;
/**************************/
@@ -3679,9 +3700,10 @@
| See function "i_APCI1710_InitCompareLogic" |
+----------------------------------------------------------------------------+
*/
-
-int i_APCI1710_DisableCompareLogic(struct comedi_device *dev, unsigned char b_ModulNbr)
+static int i_APCI1710_DisableCompareLogic(struct comedi_device *dev,
+ unsigned char b_ModulNbr)
{
+ struct addi_private *devpriv = dev->private;
int i_ReturnValue = 0;
/**************************/
@@ -3788,10 +3810,11 @@
| -6: Interrupt function not initialised. |
+----------------------------------------------------------------------------+
*/
-
-int i_APCI1710_EnableFrequencyMeasurement(struct comedi_device *dev,
- unsigned char b_ModulNbr, unsigned char b_InterruptEnable)
+static int i_APCI1710_EnableFrequencyMeasurement(struct comedi_device *dev,
+ unsigned char b_ModulNbr,
+ unsigned char b_InterruptEnable)
{
+ struct addi_private *devpriv = dev->private;
int i_ReturnValue = 0;
/**************************/
@@ -3935,9 +3958,10 @@
| See function "i_APCI1710_InitFrequencyMeasurement" |
+----------------------------------------------------------------------------+
*/
-
-int i_APCI1710_DisableFrequencyMeasurement(struct comedi_device *dev, unsigned char b_ModulNbr)
+static int i_APCI1710_DisableFrequencyMeasurement(struct comedi_device *dev,
+ unsigned char b_ModulNbr)
{
+ struct addi_private *devpriv = dev->private;
int i_ReturnValue = 0;
/**************************/
@@ -4029,134 +4053,80 @@
return i_ReturnValue;
}
-/*########################################################################### */
-
- /* INSN READ */
-
-/*########################################################################### */
-
/*
-+----------------------------------------------------------------------------+
-| Function Name :INT i_APCI1710_InsnWriteINCCPT(struct comedi_device *dev,struct comedi_subdevice *s,
-struct comedi_insn *insn,unsigned int *data) |
-+----------------------------------------------------------------------------+
-| Task : Read and Get functions for INC_CPT |
-+----------------------------------------------------------------------------+
-| Input Parameters :
-+----------------------------------------------------------------------------+
-| Output Parameters : - |
-+----------------------------------------------------------------------------+
-| Return Value :
-+----------------------------------------------------------------------------+
-*/
-int i_APCI1710_InsnReadINCCPT(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data)
+ * Enable Disable functions for INC_CPT
+ */
+static int i_APCI1710_InsnWriteINCCPT(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
{
- unsigned int ui_ReadType;
+ struct addi_private *devpriv = dev->private;
+ unsigned int ui_WriteType;
int i_ReturnValue = 0;
- ui_ReadType = CR_CHAN(insn->chanspec);
-
+ ui_WriteType = CR_CHAN(insn->chanspec);
devpriv->tsk_Current = current; /* Save the current process task structure */
- switch (ui_ReadType) {
- case APCI1710_INCCPT_READLATCHREGISTERSTATUS:
- i_ReturnValue = i_APCI1710_ReadLatchRegisterStatus(dev,
+
+ switch (ui_WriteType) {
+ case APCI1710_INCCPT_ENABLELATCHINTERRUPT:
+ i_ReturnValue = i_APCI1710_EnableLatchInterrupt(dev,
+ (unsigned char) CR_AREF(insn->chanspec));
+ break;
+
+ case APCI1710_INCCPT_DISABLELATCHINTERRUPT:
+ i_ReturnValue = i_APCI1710_DisableLatchInterrupt(dev,
+ (unsigned char) CR_AREF(insn->chanspec));
+ break;
+
+ case APCI1710_INCCPT_WRITE16BITCOUNTERVALUE:
+ i_ReturnValue = i_APCI1710_Write16BitCounterValue(dev,
(unsigned char) CR_AREF(insn->chanspec),
- (unsigned char) CR_RANGE(insn->chanspec), (unsigned char *) &data[0]);
+ (unsigned char) data[0], (unsigned int) data[1]);
break;
- case APCI1710_INCCPT_READLATCHREGISTERVALUE:
- i_ReturnValue = i_APCI1710_ReadLatchRegisterValue(dev,
- (unsigned char) CR_AREF(insn->chanspec),
- (unsigned char) CR_RANGE(insn->chanspec), (unsigned int *) &data[0]);
- printk("Latch Register Value %d\n", data[0]);
- break;
-
- case APCI1710_INCCPT_READ16BITCOUNTERVALUE:
- i_ReturnValue = i_APCI1710_Read16BitCounterValue(dev,
- (unsigned char) CR_AREF(insn->chanspec),
- (unsigned char) CR_RANGE(insn->chanspec), (unsigned int *) &data[0]);
- break;
-
- case APCI1710_INCCPT_READ32BITCOUNTERVALUE:
- i_ReturnValue = i_APCI1710_Read32BitCounterValue(dev,
- (unsigned char) CR_AREF(insn->chanspec), (unsigned int *) &data[0]);
- break;
-
- case APCI1710_INCCPT_GETINDEXSTATUS:
- i_ReturnValue = i_APCI1710_GetIndexStatus(dev,
- (unsigned char) CR_AREF(insn->chanspec), (unsigned char *) &data[0]);
- break;
-
- case APCI1710_INCCPT_GETREFERENCESTATUS:
- i_ReturnValue = i_APCI1710_GetReferenceStatus(dev,
- (unsigned char) CR_AREF(insn->chanspec), (unsigned char *) &data[0]);
- break;
-
- case APCI1710_INCCPT_GETUASSTATUS:
- i_ReturnValue = i_APCI1710_GetUASStatus(dev,
- (unsigned char) CR_AREF(insn->chanspec), (unsigned char *) &data[0]);
- break;
-
- case APCI1710_INCCPT_GETCBSTATUS:
- i_ReturnValue = i_APCI1710_GetCBStatus(dev,
- (unsigned char) CR_AREF(insn->chanspec), (unsigned char *) &data[0]);
- break;
-
- case APCI1710_INCCPT_GET16BITCBSTATUS:
- i_ReturnValue = i_APCI1710_Get16BitCBStatus(dev,
- (unsigned char) CR_AREF(insn->chanspec),
- (unsigned char *) &data[0], (unsigned char *) &data[1]);
- break;
-
- case APCI1710_INCCPT_GETUDSTATUS:
- i_ReturnValue = i_APCI1710_GetUDStatus(dev,
- (unsigned char) CR_AREF(insn->chanspec), (unsigned char *) &data[0]);
+ case APCI1710_INCCPT_WRITE32BITCOUNTERVALUE:
+ i_ReturnValue = i_APCI1710_Write32BitCounterValue(dev,
+ (unsigned char) CR_AREF(insn->chanspec), (unsigned int) data[0]);
break;
- case APCI1710_INCCPT_GETINTERRUPTUDLATCHEDSTATUS:
- i_ReturnValue = i_APCI1710_GetInterruptUDLatchedStatus(dev,
- (unsigned char) CR_AREF(insn->chanspec), (unsigned char *) &data[0]);
+ case APCI1710_INCCPT_ENABLEINDEX:
+ i_APCI1710_EnableIndex(dev, (unsigned char) CR_AREF(insn->chanspec));
break;
- case APCI1710_INCCPT_READFREQUENCYMEASUREMENT:
- i_ReturnValue = i_APCI1710_ReadFrequencyMeasurement(dev,
- (unsigned char) CR_AREF(insn->chanspec),
- (unsigned char *) &data[0],
- (unsigned char *) &data[1], (unsigned int *) &data[2]);
+ case APCI1710_INCCPT_DISABLEINDEX:
+ i_ReturnValue = i_APCI1710_DisableIndex(dev,
+ (unsigned char) CR_AREF(insn->chanspec));
break;
- case APCI1710_INCCPT_READINTERRUPT:
- data[0] = devpriv->s_InterruptParameters.
- s_FIFOInterruptParameters[devpriv->
- s_InterruptParameters.ui_Read].b_OldModuleMask;
- data[1] = devpriv->s_InterruptParameters.
- s_FIFOInterruptParameters[devpriv->
- s_InterruptParameters.ui_Read].ul_OldInterruptMask;
- data[2] = devpriv->s_InterruptParameters.
- s_FIFOInterruptParameters[devpriv->
- s_InterruptParameters.ui_Read].ul_OldCounterLatchValue;
+ case APCI1710_INCCPT_ENABLECOMPARELOGIC:
+ i_ReturnValue = i_APCI1710_EnableCompareLogic(dev,
+ (unsigned char) CR_AREF(insn->chanspec));
+ break;
- /**************************/
- /* Increment the read FIFO */
- /***************************/
+ case APCI1710_INCCPT_DISABLECOMPARELOGIC:
+ i_ReturnValue = i_APCI1710_DisableCompareLogic(dev,
+ (unsigned char) CR_AREF(insn->chanspec));
+ break;
- devpriv->
- s_InterruptParameters.
- ui_Read = (devpriv->s_InterruptParameters.
- ui_Read + 1) % APCI1710_SAVE_INTERRUPT;
+ case APCI1710_INCCPT_ENABLEFREQUENCYMEASUREMENT:
+ i_ReturnValue = i_APCI1710_EnableFrequencyMeasurement(dev,
+ (unsigned char) CR_AREF(insn->chanspec), (unsigned char) data[0]);
+ break;
+ case APCI1710_INCCPT_DISABLEFREQUENCYMEASUREMENT:
+ i_ReturnValue = i_APCI1710_DisableFrequencyMeasurement(dev,
+ (unsigned char) CR_AREF(insn->chanspec));
break;
default:
- printk("ReadType Parameter wrong\n");
+ printk("Write Config Parameter Wrong\n");
}
if (i_ReturnValue >= 0)
i_ReturnValue = insn->n;
return i_ReturnValue;
-
}
/*
@@ -4192,10 +4162,12 @@
| -4: The selected latch register parameter is wrong |
+----------------------------------------------------------------------------+
*/
-
-int i_APCI1710_ReadLatchRegisterStatus(struct comedi_device *dev,
- unsigned char b_ModulNbr, unsigned char b_LatchReg, unsigned char *pb_LatchStatus)
+static int i_APCI1710_ReadLatchRegisterStatus(struct comedi_device *dev,
+ unsigned char b_ModulNbr,
+ unsigned char b_LatchReg,
+ unsigned char *pb_LatchStatus)
{
+ struct addi_private *devpriv = dev->private;
int i_ReturnValue = 0;
unsigned int dw_LatchReg;
@@ -4279,10 +4251,12 @@
| -4: The selected latch register parameter is wrong |
+----------------------------------------------------------------------------+
*/
-
-int i_APCI1710_ReadLatchRegisterValue(struct comedi_device *dev,
- unsigned char b_ModulNbr, unsigned char b_LatchReg, unsigned int *pul_LatchValue)
+static int i_APCI1710_ReadLatchRegisterValue(struct comedi_device *dev,
+ unsigned char b_ModulNbr,
+ unsigned char b_LatchReg,
+ unsigned int *pul_LatchValue)
{
+ struct addi_private *devpriv = dev->private;
int i_ReturnValue = 0;
/**************************/
@@ -4363,10 +4337,12 @@
| -4: The selected 16-Bit counter parameter is wrong |
+----------------------------------------------------------------------------+
*/
-
-int i_APCI1710_Read16BitCounterValue(struct comedi_device *dev,
- unsigned char b_ModulNbr, unsigned char b_SelectedCounter, unsigned int *pui_CounterValue)
+static int i_APCI1710_Read16BitCounterValue(struct comedi_device *dev,
+ unsigned char b_ModulNbr,
+ unsigned char b_SelectedCounter,
+ unsigned int *pui_CounterValue)
{
+ struct addi_private *devpriv = dev->private;
int i_ReturnValue = 0;
unsigned int dw_LathchValue = 0;
@@ -4458,10 +4434,11 @@
| "i_APCI1710_InitCounter" |
+----------------------------------------------------------------------------+
*/
-
-int i_APCI1710_Read32BitCounterValue(struct comedi_device *dev,
- unsigned char b_ModulNbr, unsigned int *pul_CounterValue)
+static int i_APCI1710_Read32BitCounterValue(struct comedi_device *dev,
+ unsigned char b_ModulNbr,
+ unsigned int *pul_CounterValue)
{
+ struct addi_private *devpriv = dev->private;
int i_ReturnValue = 0;
/**************************/
@@ -4534,10 +4511,11 @@
| "i_APCI1710_InitIndex" |
+----------------------------------------------------------------------------+
*/
-
-int i_APCI1710_GetIndexStatus(struct comedi_device *dev,
- unsigned char b_ModulNbr, unsigned char *pb_IndexStatus)
+static int i_APCI1710_GetIndexStatus(struct comedi_device *dev,
+ unsigned char b_ModulNbr,
+ unsigned char *pb_IndexStatus)
{
+ struct addi_private *devpriv = dev->private;
int i_ReturnValue = 0;
unsigned int dw_StatusReg = 0;
@@ -4618,10 +4596,11 @@
| "i_APCI1710_InitReference" |
+----------------------------------------------------------------------------+
*/
-
-int i_APCI1710_GetReferenceStatus(struct comedi_device *dev,
- unsigned char b_ModulNbr, unsigned char *pb_ReferenceStatus)
+static int i_APCI1710_GetReferenceStatus(struct comedi_device *dev,
+ unsigned char b_ModulNbr,
+ unsigned char *pb_ReferenceStatus)
{
+ struct addi_private *devpriv = dev->private;
int i_ReturnValue = 0;
unsigned int dw_StatusReg = 0;
@@ -4702,10 +4681,11 @@
| "i_APCI1710_InitCounter" |
+----------------------------------------------------------------------------+
*/
-
-int i_APCI1710_GetUASStatus(struct comedi_device *dev,
- unsigned char b_ModulNbr, unsigned char *pb_UASStatus)
+static int i_APCI1710_GetUASStatus(struct comedi_device *dev,
+ unsigned char b_ModulNbr,
+ unsigned char *pb_UASStatus)
{
+ struct addi_private *devpriv = dev->private;
int i_ReturnValue = 0;
unsigned int dw_StatusReg = 0;
@@ -4770,10 +4750,11 @@
| "i_APCI1710_InitCounter" |
+----------------------------------------------------------------------------+
*/
-
-int i_APCI1710_GetCBStatus(struct comedi_device *dev,
- unsigned char b_ModulNbr, unsigned char *pb_CBStatus)
+static int i_APCI1710_GetCBStatus(struct comedi_device *dev,
+ unsigned char b_ModulNbr,
+ unsigned char *pb_CBStatus)
{
+ struct addi_private *devpriv = dev->private;
int i_ReturnValue = 0;
unsigned int dw_StatusReg = 0;
@@ -4852,10 +4833,12 @@
| -5: Firmware revision error |
+----------------------------------------------------------------------------+
*/
-
-int i_APCI1710_Get16BitCBStatus(struct comedi_device *dev,
- unsigned char b_ModulNbr, unsigned char *pb_CBStatusCounter0, unsigned char *pb_CBStatusCounter1)
+static int i_APCI1710_Get16BitCBStatus(struct comedi_device *dev,
+ unsigned char b_ModulNbr,
+ unsigned char *pb_CBStatusCounter0,
+ unsigned char *pb_CBStatusCounter1)
{
+ struct addi_private *devpriv = dev->private;
int i_ReturnValue = 0;
unsigned int dw_StatusReg = 0;
@@ -4965,10 +4948,11 @@
| "i_APCI1710_InitCounter" |
+----------------------------------------------------------------------------+
*/
-
-int i_APCI1710_GetUDStatus(struct comedi_device *dev,
- unsigned char b_ModulNbr, unsigned char *pb_UDStatus)
+static int i_APCI1710_GetUDStatus(struct comedi_device *dev,
+ unsigned char b_ModulNbr,
+ unsigned char *pb_UDStatus)
{
+ struct addi_private *devpriv = dev->private;
int i_ReturnValue = 0;
unsigned int dw_StatusReg = 0;
@@ -5039,10 +5023,11 @@
| See function "i_APCI1710_SetBoardIntRoutineX" |
+----------------------------------------------------------------------------+
*/
-
-int i_APCI1710_GetInterruptUDLatchedStatus(struct comedi_device *dev,
- unsigned char b_ModulNbr, unsigned char *pb_UDStatus)
+static int i_APCI1710_GetInterruptUDLatchedStatus(struct comedi_device *dev,
+ unsigned char b_ModulNbr,
+ unsigned char *pb_UDStatus)
{
+ struct addi_private *devpriv = dev->private;
int i_ReturnValue = 0;
unsigned int dw_StatusReg = 0;
@@ -5144,11 +5129,13 @@
| See function "i_APCI1710_InitFrequencyMeasurement" |
+----------------------------------------------------------------------------+
*/
-
-int i_APCI1710_ReadFrequencyMeasurement(struct comedi_device *dev,
- unsigned char b_ModulNbr,
- unsigned char *pb_Status, unsigned char *pb_UDStatus, unsigned int *pul_ReadValue)
+static int i_APCI1710_ReadFrequencyMeasurement(struct comedi_device *dev,
+ unsigned char b_ModulNbr,
+ unsigned char *pb_Status,
+ unsigned char *pb_UDStatus,
+ unsigned int *pul_ReadValue)
{
+ struct addi_private *devpriv = dev->private;
int i_ReturnValue = 0;
unsigned int ui_16BitValue;
unsigned int dw_StatusReg;
@@ -5361,3 +5348,118 @@
return i_ReturnValue;
}
+/*
+ * Read and Get functions for INC_CPT
+ */
+static int i_APCI1710_InsnReadINCCPT(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
+{
+ struct addi_private *devpriv = dev->private;
+ unsigned int ui_ReadType;
+ int i_ReturnValue = 0;
+
+ ui_ReadType = CR_CHAN(insn->chanspec);
+
+ devpriv->tsk_Current = current; /* Save the current process task structure */
+ switch (ui_ReadType) {
+ case APCI1710_INCCPT_READLATCHREGISTERSTATUS:
+ i_ReturnValue = i_APCI1710_ReadLatchRegisterStatus(dev,
+ (unsigned char) CR_AREF(insn->chanspec),
+ (unsigned char) CR_RANGE(insn->chanspec), (unsigned char *) &data[0]);
+ break;
+
+ case APCI1710_INCCPT_READLATCHREGISTERVALUE:
+ i_ReturnValue = i_APCI1710_ReadLatchRegisterValue(dev,
+ (unsigned char) CR_AREF(insn->chanspec),
+ (unsigned char) CR_RANGE(insn->chanspec), (unsigned int *) &data[0]);
+ printk("Latch Register Value %d\n", data[0]);
+ break;
+
+ case APCI1710_INCCPT_READ16BITCOUNTERVALUE:
+ i_ReturnValue = i_APCI1710_Read16BitCounterValue(dev,
+ (unsigned char) CR_AREF(insn->chanspec),
+ (unsigned char) CR_RANGE(insn->chanspec), (unsigned int *) &data[0]);
+ break;
+
+ case APCI1710_INCCPT_READ32BITCOUNTERVALUE:
+ i_ReturnValue = i_APCI1710_Read32BitCounterValue(dev,
+ (unsigned char) CR_AREF(insn->chanspec), (unsigned int *) &data[0]);
+ break;
+
+ case APCI1710_INCCPT_GETINDEXSTATUS:
+ i_ReturnValue = i_APCI1710_GetIndexStatus(dev,
+ (unsigned char) CR_AREF(insn->chanspec), (unsigned char *) &data[0]);
+ break;
+
+ case APCI1710_INCCPT_GETREFERENCESTATUS:
+ i_ReturnValue = i_APCI1710_GetReferenceStatus(dev,
+ (unsigned char) CR_AREF(insn->chanspec), (unsigned char *) &data[0]);
+ break;
+
+ case APCI1710_INCCPT_GETUASSTATUS:
+ i_ReturnValue = i_APCI1710_GetUASStatus(dev,
+ (unsigned char) CR_AREF(insn->chanspec), (unsigned char *) &data[0]);
+ break;
+
+ case APCI1710_INCCPT_GETCBSTATUS:
+ i_ReturnValue = i_APCI1710_GetCBStatus(dev,
+ (unsigned char) CR_AREF(insn->chanspec), (unsigned char *) &data[0]);
+ break;
+
+ case APCI1710_INCCPT_GET16BITCBSTATUS:
+ i_ReturnValue = i_APCI1710_Get16BitCBStatus(dev,
+ (unsigned char) CR_AREF(insn->chanspec),
+ (unsigned char *) &data[0], (unsigned char *) &data[1]);
+ break;
+
+ case APCI1710_INCCPT_GETUDSTATUS:
+ i_ReturnValue = i_APCI1710_GetUDStatus(dev,
+ (unsigned char) CR_AREF(insn->chanspec), (unsigned char *) &data[0]);
+
+ break;
+
+ case APCI1710_INCCPT_GETINTERRUPTUDLATCHEDSTATUS:
+ i_ReturnValue = i_APCI1710_GetInterruptUDLatchedStatus(dev,
+ (unsigned char) CR_AREF(insn->chanspec), (unsigned char *) &data[0]);
+ break;
+
+ case APCI1710_INCCPT_READFREQUENCYMEASUREMENT:
+ i_ReturnValue = i_APCI1710_ReadFrequencyMeasurement(dev,
+ (unsigned char) CR_AREF(insn->chanspec),
+ (unsigned char *) &data[0],
+ (unsigned char *) &data[1], (unsigned int *) &data[2]);
+ break;
+
+ case APCI1710_INCCPT_READINTERRUPT:
+ data[0] = devpriv->s_InterruptParameters.
+ s_FIFOInterruptParameters[devpriv->
+ s_InterruptParameters.ui_Read].b_OldModuleMask;
+ data[1] = devpriv->s_InterruptParameters.
+ s_FIFOInterruptParameters[devpriv->
+ s_InterruptParameters.ui_Read].ul_OldInterruptMask;
+ data[2] = devpriv->s_InterruptParameters.
+ s_FIFOInterruptParameters[devpriv->
+ s_InterruptParameters.ui_Read].ul_OldCounterLatchValue;
+
+ /**************************/
+ /* Increment the read FIFO */
+ /***************************/
+
+ devpriv->
+ s_InterruptParameters.
+ ui_Read = (devpriv->s_InterruptParameters.
+ ui_Read + 1) % APCI1710_SAVE_INTERRUPT;
+
+ break;
+
+ default:
+ printk("ReadType Parameter wrong\n");
+ }
+
+ if (i_ReturnValue >= 0)
+ i_ReturnValue = insn->n;
+ return i_ReturnValue;
+
+}
diff --git a/drivers/staging/comedi/drivers/addi-data/APCI1710_INCCPT.h b/drivers/staging/comedi/drivers/addi-data/APCI1710_INCCPT.h
deleted file mode 100644
index 358298b..0000000
--- a/drivers/staging/comedi/drivers/addi-data/APCI1710_INCCPT.h
+++ /dev/null
@@ -1,271 +0,0 @@
-/*
- * Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module.
- *
- * ADDI-DATA GmbH
- * Dieselstrasse 3
- * D-77833 Ottersweier
- * Tel: +19(0)7223/9493-0
- * Fax: +49(0)7223/9493-92
- * http://www.addi-data.com
- * info@addi-data.com
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 of the License, or (at your option)
- * any later version.
- */
-
-#define APCI1710_16BIT_COUNTER 0x10
-#define APCI1710_32BIT_COUNTER 0x0
-#define APCI1710_QUADRUPLE_MODE 0x0
-#define APCI1710_DOUBLE_MODE 0x3
-#define APCI1710_SIMPLE_MODE 0xF
-#define APCI1710_DIRECT_MODE 0x80
-#define APCI1710_HYSTERESIS_ON 0x60
-#define APCI1710_HYSTERESIS_OFF 0x0
-#define APCI1710_INCREMENT 0x60
-#define APCI1710_DECREMENT 0x0
-#define APCI1710_LATCH_COUNTER 0x1
-#define APCI1710_CLEAR_COUNTER 0x0
-#define APCI1710_LOW 0x0
-#define APCI1710_HIGH 0x1
-
-/*********************/
-/* Version 0600-0229 */
-/*********************/
-#define APCI1710_HIGH_EDGE_CLEAR_COUNTER 0x0
-#define APCI1710_HIGH_EDGE_LATCH_COUNTER 0x1
-#define APCI1710_LOW_EDGE_CLEAR_COUNTER 0x2
-#define APCI1710_LOW_EDGE_LATCH_COUNTER 0x3
-#define APCI1710_HIGH_EDGE_LATCH_AND_CLEAR_COUNTER 0x4
-#define APCI1710_LOW_EDGE_LATCH_AND_CLEAR_COUNTER 0x5
-#define APCI1710_SOURCE_0 0x0
-#define APCI1710_SOURCE_1 0x1
-
-#define APCI1710_30MHZ 30
-#define APCI1710_33MHZ 33
-#define APCI1710_40MHZ 40
-
-#define APCI1710_ENABLE_LATCH_INT 0x80
-#define APCI1710_DISABLE_LATCH_INT (~APCI1710_ENABLE_LATCH_INT)
-
-#define APCI1710_INDEX_LATCH_COUNTER 0x10
-#define APCI1710_INDEX_AUTO_MODE 0x8
-#define APCI1710_ENABLE_INDEX 0x4
-#define APCI1710_DISABLE_INDEX (~APCI1710_ENABLE_INDEX)
-#define APCI1710_ENABLE_LATCH_AND_CLEAR 0x8
-#define APCI1710_DISABLE_LATCH_AND_CLEAR (~APCI1710_ENABLE_LATCH_AND_CLEAR)
-#define APCI1710_SET_LOW_INDEX_LEVEL 0x4
-#define APCI1710_SET_HIGH_INDEX_LEVEL (~APCI1710_SET_LOW_INDEX_LEVEL)
-#define APCI1710_INVERT_INDEX_RFERENCE 0x2
-#define APCI1710_DEFAULT_INDEX_RFERENCE (~APCI1710_INVERT_INDEX_RFERENCE)
-
-#define APCI1710_ENABLE_INDEX_INT 0x1
-#define APCI1710_DISABLE_INDEX_INT (~APCI1710_ENABLE_INDEX_INT)
-
-#define APCI1710_ENABLE_FREQUENCY 0x4
-#define APCI1710_DISABLE_FREQUENCY (~APCI1710_ENABLE_FREQUENCY)
-
-#define APCI1710_ENABLE_FREQUENCY_INT 0x8
-#define APCI1710_DISABLE_FREQUENCY_INT (~APCI1710_ENABLE_FREQUENCY_INT)
-
-#define APCI1710_ENABLE_40MHZ_FREQUENCY 0x40
-#define APCI1710_DISABLE_40MHZ_FREQUENCY (~APCI1710_ENABLE_40MHZ_FREQUENCY)
-
-#define APCI1710_ENABLE_40MHZ_FILTER 0x80
-#define APCI1710_DISABLE_40MHZ_FILTER (~APCI1710_ENABLE_40MHZ_FILTER)
-
-#define APCI1710_ENABLE_COMPARE_INT 0x2
-#define APCI1710_DISABLE_COMPARE_INT (~APCI1710_ENABLE_COMPARE_INT)
-
-#define APCI1710_ENABLE_INDEX_ACTION 0x20
-#define APCI1710_DISABLE_INDEX_ACTION (~APCI1710_ENABLE_INDEX_ACTION)
-#define APCI1710_REFERENCE_HIGH 0x40
-#define APCI1710_REFERENCE_LOW (~APCI1710_REFERENCE_HIGH)
-
-#define APCI1710_TOR_GATE_LOW 0x40
-#define APCI1710_TOR_GATE_HIGH (~APCI1710_TOR_GATE_LOW)
-
-/* INSN CONFIG */
-#define APCI1710_INCCPT_INITCOUNTER 100
-#define APCI1710_INCCPT_COUNTERAUTOTEST 101
-#define APCI1710_INCCPT_INITINDEX 102
-#define APCI1710_INCCPT_INITREFERENCE 103
-#define APCI1710_INCCPT_INITEXTERNALSTROBE 104
-#define APCI1710_INCCPT_INITCOMPARELOGIC 105
-#define APCI1710_INCCPT_INITFREQUENCYMEASUREMENT 106
-
-/* INSN READ */
-#define APCI1710_INCCPT_READLATCHREGISTERSTATUS 200
-#define APCI1710_INCCPT_READLATCHREGISTERVALUE 201
-#define APCI1710_INCCPT_READ16BITCOUNTERVALUE 202
-#define APCI1710_INCCPT_READ32BITCOUNTERVALUE 203
-#define APCI1710_INCCPT_GETINDEXSTATUS 204
-#define APCI1710_INCCPT_GETREFERENCESTATUS 205
-#define APCI1710_INCCPT_GETUASSTATUS 206
-#define APCI1710_INCCPT_GETCBSTATUS 207
-#define APCI1710_INCCPT_GET16BITCBSTATUS 208
-#define APCI1710_INCCPT_GETUDSTATUS 209
-#define APCI1710_INCCPT_GETINTERRUPTUDLATCHEDSTATUS 210
-#define APCI1710_INCCPT_READFREQUENCYMEASUREMENT 211
-#define APCI1710_INCCPT_READINTERRUPT 212
-
-/* INSN BITS */
-#define APCI1710_INCCPT_CLEARCOUNTERVALUE 300
-#define APCI1710_INCCPT_CLEARALLCOUNTERVALUE 301
-#define APCI1710_INCCPT_SETINPUTFILTER 302
-#define APCI1710_INCCPT_LATCHCOUNTER 303
-#define APCI1710_INCCPT_SETINDEXANDREFERENCESOURCE 304
-#define APCI1710_INCCPT_SETDIGITALCHLON 305
-#define APCI1710_INCCPT_SETDIGITALCHLOFF 306
-
-/* INSN WRITE */
-#define APCI1710_INCCPT_ENABLELATCHINTERRUPT 400
-#define APCI1710_INCCPT_DISABLELATCHINTERRUPT 401
-#define APCI1710_INCCPT_WRITE16BITCOUNTERVALUE 402
-#define APCI1710_INCCPT_WRITE32BITCOUNTERVALUE 403
-#define APCI1710_INCCPT_ENABLEINDEX 404
-#define APCI1710_INCCPT_DISABLEINDEX 405
-#define APCI1710_INCCPT_ENABLECOMPARELOGIC 406
-#define APCI1710_INCCPT_DISABLECOMPARELOGIC 407
-#define APCI1710_INCCPT_ENABLEFREQUENCYMEASUREMENT 408
-#define APCI1710_INCCPT_DISABLEFREQUENCYMEASUREMENT 409
-
-/************ Main Functions *************/
-int i_APCI1710_InsnConfigINCCPT(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int * data);
-
-int i_APCI1710_InsnBitsINCCPT(struct comedi_device *dev, struct comedi_subdevice * s,
- struct comedi_insn *insn, unsigned int * data);
-
-int i_APCI1710_InsnWriteINCCPT(struct comedi_device *dev, struct comedi_subdevice * s,
- struct comedi_insn *insn, unsigned int * data);
-
-int i_APCI1710_InsnReadINCCPT(struct comedi_device *dev, struct comedi_subdevice * s,
- struct comedi_insn *insn, unsigned int * data);
-
-/*********** Supplementary Functions********/
-
-/* INSN CONFIG */
-int i_APCI1710_InitCounter(struct comedi_device *dev,
- unsigned char b_ModulNbr,
- unsigned char b_CounterRange,
- unsigned char b_FirstCounterModus,
- unsigned char b_FirstCounterOption,
- unsigned char b_SecondCounterModus,
- unsigned char b_SecondCounterOption);
-
-int i_APCI1710_CounterAutoTest(struct comedi_device *dev, unsigned char * pb_TestStatus);
-
-int i_APCI1710_InitIndex(struct comedi_device *dev,
- unsigned char b_ModulNbr,
- unsigned char b_ReferenceAction,
- unsigned char b_IndexOperation, unsigned char b_AutoMode,
- unsigned char b_InterruptEnable);
-
-int i_APCI1710_InitReference(struct comedi_device *dev,
- unsigned char b_ModulNbr, unsigned char b_ReferenceLevel);
-
-int i_APCI1710_InitExternalStrobe(struct comedi_device *dev,
- unsigned char b_ModulNbr, unsigned char b_ExternalStrobe,
- unsigned char b_ExternalStrobeLevel);
-
-int i_APCI1710_InitCompareLogic(struct comedi_device *dev,
- unsigned char b_ModulNbr, unsigned int ui_CompareValue);
-
-int i_APCI1710_InitFrequencyMeasurement(struct comedi_device *dev,
- unsigned char b_ModulNbr,
- unsigned char b_PCIInputClock,
- unsigned char b_TimingUnity,
- unsigned int ul_TimingInterval,
- unsigned int *pul_RealTimingInterval);
-
-/* INSN BITS */
-int i_APCI1710_ClearCounterValue(struct comedi_device *dev, unsigned char b_ModulNbr);
-
-int i_APCI1710_ClearAllCounterValue(struct comedi_device *dev);
-
-int i_APCI1710_SetInputFilter(struct comedi_device *dev,
- unsigned char b_ModulNbr, unsigned char b_PCIInputClock,
- unsigned char b_Filter);
-
-int i_APCI1710_LatchCounter(struct comedi_device *dev,
- unsigned char b_ModulNbr, unsigned char b_LatchReg);
-
-int i_APCI1710_SetIndexAndReferenceSource(struct comedi_device *dev,
- unsigned char b_ModulNbr,
- unsigned char b_SourceSelection);
-
-int i_APCI1710_SetDigitalChlOn(struct comedi_device *dev, unsigned char b_ModulNbr);
-
-int i_APCI1710_SetDigitalChlOff(struct comedi_device *dev, unsigned char b_ModulNbr);
-
-/* INSN WRITE */
-int i_APCI1710_EnableLatchInterrupt(struct comedi_device *dev, unsigned char b_ModulNbr);
-
-int i_APCI1710_DisableLatchInterrupt(struct comedi_device *dev, unsigned char b_ModulNbr);
-
-int i_APCI1710_Write16BitCounterValue(struct comedi_device *dev,
- unsigned char b_ModulNbr, unsigned char b_SelectedCounter,
- unsigned int ui_WriteValue);
-
-int i_APCI1710_Write32BitCounterValue(struct comedi_device *dev,
- unsigned char b_ModulNbr, unsigned int ul_WriteValue);
-
-int i_APCI1710_EnableIndex(struct comedi_device *dev, unsigned char b_ModulNbr);
-
-int i_APCI1710_DisableIndex(struct comedi_device *dev, unsigned char b_ModulNbr);
-
-int i_APCI1710_EnableCompareLogic(struct comedi_device *dev, unsigned char b_ModulNbr);
-
-int i_APCI1710_DisableCompareLogic(struct comedi_device *dev, unsigned char b_ModulNbr);
-
-int i_APCI1710_EnableFrequencyMeasurement(struct comedi_device *dev,
- unsigned char b_ModulNbr,
- unsigned char b_InterruptEnable);
-
-int i_APCI1710_DisableFrequencyMeasurement(struct comedi_device *dev,
- unsigned char b_ModulNbr);
-
-/* INSN READ */
-int i_APCI1710_ReadLatchRegisterStatus(struct comedi_device *dev,
- unsigned char b_ModulNbr, unsigned char b_LatchReg,
- unsigned char *pb_LatchStatus);
-
-int i_APCI1710_ReadLatchRegisterValue(struct comedi_device *dev,
- unsigned char b_ModulNbr, unsigned char b_LatchReg,
- unsigned int *pul_LatchValue);
-
-int i_APCI1710_Read16BitCounterValue(struct comedi_device *dev,
- unsigned char b_ModulNbr, unsigned char b_SelectedCounter,
- unsigned int *pui_CounterValue);
-
-int i_APCI1710_Read32BitCounterValue(struct comedi_device *dev,
- unsigned char b_ModulNbr, unsigned int *pul_CounterValue);
-
-int i_APCI1710_GetIndexStatus(struct comedi_device *dev,
- unsigned char b_ModulNbr, unsigned char *pb_IndexStatus);
-
-int i_APCI1710_GetReferenceStatus(struct comedi_device *dev,
- unsigned char b_ModulNbr, unsigned char *pb_ReferenceStatus);
-
-int i_APCI1710_GetUASStatus(struct comedi_device *dev,
- unsigned char b_ModulNbr, unsigned char *pb_UASStatus);
-
-int i_APCI1710_GetCBStatus(struct comedi_device *dev,
- unsigned char b_ModulNbr, unsigned char *pb_CBStatus);
-
-int i_APCI1710_Get16BitCBStatus(struct comedi_device *dev,
- unsigned char b_ModulNbr, unsigned char *pb_CBStatusCounter0,
- unsigned char *pb_CBStatusCounter1);
-
-int i_APCI1710_GetUDStatus(struct comedi_device *dev,
- unsigned char b_ModulNbr, unsigned char *pb_UDStatus);
-
-int i_APCI1710_GetInterruptUDLatchedStatus(struct comedi_device *dev,
- unsigned char b_ModulNbr, unsigned char *pb_UDStatus);
-
-int i_APCI1710_ReadFrequencyMeasurement(struct comedi_device *dev,
- unsigned char b_ModulNbr,
- unsigned char *pb_Status, unsigned char *pb_UDStatus,
- unsigned int *pul_ReadValue);
diff --git a/drivers/staging/comedi/drivers/addi-data/APCI1710_Inp_cpt.c b/drivers/staging/comedi/drivers/addi-data/APCI1710_Inp_cpt.c
index 3f9cfa2..be0c6ad 100644
--- a/drivers/staging/comedi/drivers/addi-data/APCI1710_Inp_cpt.c
+++ b/drivers/staging/comedi/drivers/addi-data/APCI1710_Inp_cpt.c
@@ -49,13 +49,11 @@
+-----------------------------------------------------------------------+
*/
-/*
-+----------------------------------------------------------------------------+
-| Included files |
-+----------------------------------------------------------------------------+
-*/
+#define APCI1710_SINGLE 0
+#define APCI1710_CONTINUOUS 1
-#include "APCI1710_Inp_cpt.h"
+#define APCI1710_PULSEENCODER_READ 0
+#define APCI1710_PULSEENCODER_WRITE 1
/*
+----------------------------------------------------------------------------+
@@ -123,12 +121,14 @@
+----------------------------------------------------------------------------+
*/
-int i_APCI1710_InsnConfigInitPulseEncoder(struct comedi_device *dev,
- struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
+static int i_APCI1710_InsnConfigInitPulseEncoder(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
{
+ struct addi_private *devpriv = dev->private;
int i_ReturnValue = 0;
unsigned int dw_IntRegister;
-
unsigned char b_ModulNbr;
unsigned char b_PulseEncoderNbr;
unsigned char b_InputLevelSelection;
@@ -414,9 +414,12 @@
+----------------------------------------------------------------------------+
*/
-int i_APCI1710_InsnWriteEnableDisablePulseEncoder(struct comedi_device *dev,
- struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
+static int i_APCI1710_InsnWriteEnableDisablePulseEncoder(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
{
+ struct addi_private *devpriv = dev->private;
int i_ReturnValue = 0;
unsigned char b_ModulNbr;
unsigned char b_PulseEncoderNbr;
@@ -708,9 +711,12 @@
unsigned char *_ pb_Status)
*/
-int i_APCI1710_InsnBitsReadWritePulseEncoder(struct comedi_device *dev,
- struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
+static int i_APCI1710_InsnBitsReadWritePulseEncoder(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
{
+ struct addi_private *devpriv = dev->private;
int i_ReturnValue = 0;
unsigned int dw_StatusRegister;
unsigned char b_ModulNbr;
@@ -834,9 +840,12 @@
return i_ReturnValue;
}
-int i_APCI1710_InsnReadInterruptPulseEncoder(struct comedi_device *dev,
- struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
+static int i_APCI1710_InsnReadInterruptPulseEncoder(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
{
+ struct addi_private *devpriv = dev->private;
data[0] = devpriv->s_InterruptParameters.
s_FIFOInterruptParameters[devpriv->
diff --git a/drivers/staging/comedi/drivers/addi-data/APCI1710_Inp_cpt.h b/drivers/staging/comedi/drivers/addi-data/APCI1710_Inp_cpt.h
deleted file mode 100644
index 31fbb0b..0000000
--- a/drivers/staging/comedi/drivers/addi-data/APCI1710_Inp_cpt.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module.
- *
- * ADDI-DATA GmbH
- * Dieselstrasse 3
- * D-77833 Ottersweier
- * Tel: +19(0)7223/9493-0
- * Fax: +49(0)7223/9493-92
- * http://www.addi-data.com
- * info@addi-data.com
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 of the License, or (at your option)
- * any later version.
- */
-
-#define APCI1710_SINGLE 0
-#define APCI1710_CONTINUOUS 1
-
-#define APCI1710_PULSEENCODER_READ 0
-#define APCI1710_PULSEENCODER_WRITE 1
-
-int i_APCI1710_InsnConfigInitPulseEncoder(struct comedi_device *dev,
- struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-
-int i_APCI1710_InsnWriteEnableDisablePulseEncoder(struct comedi_device *dev,
- struct comedi_subdevice *s,
- struct comedi_insn *insn,
- unsigned int *data);
-
-/*
- * READ PULSE ENCODER FUNCTIONS
- */
-int i_APCI1710_InsnReadInterruptPulseEncoder(struct comedi_device *dev,
- struct comedi_subdevice *s,
- struct comedi_insn *insn,
- unsigned int *data);
-
-/*
- * WRITE PULSE ENCODER FUNCTIONS
- */
-int i_APCI1710_InsnBitsReadWritePulseEncoder(struct comedi_device *dev,
- struct comedi_subdevice *s,
- struct comedi_insn *insn,
- unsigned int *data);
diff --git a/drivers/staging/comedi/drivers/addi-data/APCI1710_Pwm.c b/drivers/staging/comedi/drivers/addi-data/APCI1710_Pwm.c
index 8883e66..a211e78 100644
--- a/drivers/staging/comedi/drivers/addi-data/APCI1710_Pwm.c
+++ b/drivers/staging/comedi/drivers/addi-data/APCI1710_Pwm.c
@@ -47,72 +47,16 @@
+-----------------------------------------------------------------------+
*/
-/*
-+----------------------------------------------------------------------------+
-| Included files |
-+----------------------------------------------------------------------------+
-*/
+#define APCI1710_30MHZ 30
+#define APCI1710_33MHZ 33
+#define APCI1710_40MHZ 40
-#include "APCI1710_Pwm.h"
+#define APCI1710_PWM_INIT 0
+#define APCI1710_PWM_GETINITDATA 1
-/*
-+----------------------------------------------------------------------------+
-| Function Name :INT i_APCI1710_InsnConfigPWM(struct comedi_device *dev,
-struct comedi_subdevice *s,struct comedi_insn *insn,unsigned int *data) |
-+----------------------------------------------------------------------------+
-| Task : Pwm Init and Get Pwm Initialisation |
-+----------------------------------------------------------------------------+
-| Input Parameters :
-+----------------------------------------------------------------------------+
-| Output Parameters : - |
-+----------------------------------------------------------------------------+
-| Return Value :
-+----------------------------------------------------------------------------+
-*/
-
-int i_APCI1710_InsnConfigPWM(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data)
-{
- unsigned char b_ConfigType;
- int i_ReturnValue = 0;
- b_ConfigType = CR_CHAN(insn->chanspec);
-
- switch (b_ConfigType) {
- case APCI1710_PWM_INIT:
- i_ReturnValue = i_APCI1710_InitPWM(dev, (unsigned char) CR_AREF(insn->chanspec), /* b_ModulNbr */
- (unsigned char) data[0], /* b_PWM */
- (unsigned char) data[1], /* b_ClockSelection */
- (unsigned char) data[2], /* b_TimingUnit */
- (unsigned int) data[3], /* ul_LowTiming */
- (unsigned int) data[4], /* ul_HighTiming */
- (unsigned int *) &data[0], /* pul_RealLowTiming */
- (unsigned int *) &data[1] /* pul_RealHighTiming */
- );
- break;
-
- case APCI1710_PWM_GETINITDATA:
- i_ReturnValue = i_APCI1710_GetPWMInitialisation(dev, (unsigned char) CR_AREF(insn->chanspec), /* b_ModulNbr */
- (unsigned char) data[0], /* b_PWM */
- (unsigned char *) &data[0], /* pb_TimingUnit */
- (unsigned int *) &data[1], /* pul_LowTiming */
- (unsigned int *) &data[2], /* pul_HighTiming */
- (unsigned char *) &data[3], /* pb_StartLevel */
- (unsigned char *) &data[4], /* pb_StopMode */
- (unsigned char *) &data[5], /* pb_StopLevel */
- (unsigned char *) &data[6], /* pb_ExternGate */
- (unsigned char *) &data[7], /* pb_InterruptEnable */
- (unsigned char *) &data[8] /* pb_Enable */
- );
- break;
-
- default:
- printk(" Config Parameter Wrong\n");
- }
-
- if (i_ReturnValue >= 0)
- i_ReturnValue = insn->n;
- return i_ReturnValue;
-}
+#define APCI1710_PWM_DISABLE 0
+#define APCI1710_PWM_ENABLE 1
+#define APCI1710_PWM_NEWTIMING 2
/*
+----------------------------------------------------------------------------+
@@ -178,16 +122,17 @@
| this board |
+----------------------------------------------------------------------------+
*/
-
-int i_APCI1710_InitPWM(struct comedi_device *dev,
- unsigned char b_ModulNbr,
- unsigned char b_PWM,
- unsigned char b_ClockSelection,
- unsigned char b_TimingUnit,
- unsigned int ul_LowTiming,
- unsigned int ul_HighTiming,
- unsigned int *pul_RealLowTiming, unsigned int *pul_RealHighTiming)
+static int i_APCI1710_InitPWM(struct comedi_device *dev,
+ unsigned char b_ModulNbr,
+ unsigned char b_PWM,
+ unsigned char b_ClockSelection,
+ unsigned char b_TimingUnit,
+ unsigned int ul_LowTiming,
+ unsigned int ul_HighTiming,
+ unsigned int *pul_RealLowTiming,
+ unsigned int *pul_RealHighTiming)
{
+ struct addi_private *devpriv = dev->private;
int i_ReturnValue = 0;
unsigned int ul_LowTimerValue = 0;
unsigned int ul_HighTimerValue = 0;
@@ -1533,18 +1478,20 @@
| "i_APCI1710_InitPWM" |
+----------------------------------------------------------------------------+
*/
-
-int i_APCI1710_GetPWMInitialisation(struct comedi_device *dev,
- unsigned char b_ModulNbr,
- unsigned char b_PWM,
- unsigned char *pb_TimingUnit,
- unsigned int *pul_LowTiming,
- unsigned int *pul_HighTiming,
- unsigned char *pb_StartLevel,
- unsigned char *pb_StopMode,
- unsigned char *pb_StopLevel,
- unsigned char *pb_ExternGate, unsigned char *pb_InterruptEnable, unsigned char *pb_Enable)
+static int i_APCI1710_GetPWMInitialisation(struct comedi_device *dev,
+ unsigned char b_ModulNbr,
+ unsigned char b_PWM,
+ unsigned char *pb_TimingUnit,
+ unsigned int *pul_LowTiming,
+ unsigned int *pul_HighTiming,
+ unsigned char *pb_StartLevel,
+ unsigned char *pb_StopMode,
+ unsigned char *pb_StopLevel,
+ unsigned char *pb_ExternGate,
+ unsigned char *pb_InterruptEnable,
+ unsigned char *pb_Enable)
{
+ struct addi_private *devpriv = dev->private;
int i_ReturnValue = 0;
unsigned int dw_Status;
unsigned int dw_Command;
@@ -1669,51 +1616,47 @@
}
/*
-+----------------------------------------------------------------------------+
-| Function Name :INT i_APCI1710_InsnWritePWM(struct comedi_device *dev,
-struct comedi_subdevice *s,struct comedi_insn *insn,unsigned int *data) |
-+----------------------------------------------------------------------------+
-| Task : Pwm Enable Disable and Set New Timing |
-+----------------------------------------------------------------------------+
-| Input Parameters :
-+----------------------------------------------------------------------------+
-| Output Parameters : - |
-+----------------------------------------------------------------------------+
-| Return Value :
-+----------------------------------------------------------------------------+
-*/
-
-int i_APCI1710_InsnWritePWM(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data)
+ * Pwm Init and Get Pwm Initialisation
+ */
+static int i_APCI1710_InsnConfigPWM(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
{
- unsigned char b_WriteType;
+ unsigned char b_ConfigType;
int i_ReturnValue = 0;
- b_WriteType = CR_CHAN(insn->chanspec);
+ b_ConfigType = CR_CHAN(insn->chanspec);
- switch (b_WriteType) {
- case APCI1710_PWM_ENABLE:
- i_ReturnValue = i_APCI1710_EnablePWM(dev,
- (unsigned char) CR_AREF(insn->chanspec),
- (unsigned char) data[0],
- (unsigned char) data[1],
- (unsigned char) data[2],
- (unsigned char) data[3], (unsigned char) data[4], (unsigned char) data[5]);
+ switch (b_ConfigType) {
+ case APCI1710_PWM_INIT:
+ i_ReturnValue = i_APCI1710_InitPWM(dev, (unsigned char) CR_AREF(insn->chanspec), /* b_ModulNbr */
+ (unsigned char) data[0], /* b_PWM */
+ (unsigned char) data[1], /* b_ClockSelection */
+ (unsigned char) data[2], /* b_TimingUnit */
+ (unsigned int) data[3], /* ul_LowTiming */
+ (unsigned int) data[4], /* ul_HighTiming */
+ (unsigned int *) &data[0], /* pul_RealLowTiming */
+ (unsigned int *) &data[1] /* pul_RealHighTiming */
+ );
break;
- case APCI1710_PWM_DISABLE:
- i_ReturnValue = i_APCI1710_DisablePWM(dev,
- (unsigned char) CR_AREF(insn->chanspec), (unsigned char) data[0]);
- break;
-
- case APCI1710_PWM_NEWTIMING:
- i_ReturnValue = i_APCI1710_SetNewPWMTiming(dev,
- (unsigned char) CR_AREF(insn->chanspec),
- (unsigned char) data[0],
- (unsigned char) data[1], (unsigned int) data[2], (unsigned int) data[3]);
+ case APCI1710_PWM_GETINITDATA:
+ i_ReturnValue = i_APCI1710_GetPWMInitialisation(dev, (unsigned char) CR_AREF(insn->chanspec), /* b_ModulNbr */
+ (unsigned char) data[0], /* b_PWM */
+ (unsigned char *) &data[0], /* pb_TimingUnit */
+ (unsigned int *) &data[1], /* pul_LowTiming */
+ (unsigned int *) &data[2], /* pul_HighTiming */
+ (unsigned char *) &data[3], /* pb_StartLevel */
+ (unsigned char *) &data[4], /* pb_StopMode */
+ (unsigned char *) &data[5], /* pb_StopLevel */
+ (unsigned char *) &data[6], /* pb_ExternGate */
+ (unsigned char *) &data[7], /* pb_InterruptEnable */
+ (unsigned char *) &data[8] /* pb_Enable */
+ );
break;
default:
- printk("Write Config Parameter Wrong\n");
+ printk(" Config Parameter Wrong\n");
}
if (i_ReturnValue >= 0)
@@ -1805,14 +1748,16 @@
| See function "i_APCI1710_SetBoardIntRoutineX" |
+----------------------------------------------------------------------------+
*/
-
-int i_APCI1710_EnablePWM(struct comedi_device *dev,
- unsigned char b_ModulNbr,
- unsigned char b_PWM,
- unsigned char b_StartLevel,
- unsigned char b_StopMode,
- unsigned char b_StopLevel, unsigned char b_ExternGate, unsigned char b_InterruptEnable)
+static int i_APCI1710_EnablePWM(struct comedi_device *dev,
+ unsigned char b_ModulNbr,
+ unsigned char b_PWM,
+ unsigned char b_StartLevel,
+ unsigned char b_StopMode,
+ unsigned char b_StopLevel,
+ unsigned char b_ExternGate,
+ unsigned char b_InterruptEnable)
{
+ struct addi_private *devpriv = dev->private;
int i_ReturnValue = 0;
unsigned int dw_Status;
unsigned int dw_Command;
@@ -2061,9 +2006,11 @@
| "i_APCI1710_EnablePWM" |
+----------------------------------------------------------------------------+
*/
-
-int i_APCI1710_DisablePWM(struct comedi_device *dev, unsigned char b_ModulNbr, unsigned char b_PWM)
+static int i_APCI1710_DisablePWM(struct comedi_device *dev,
+ unsigned char b_ModulNbr,
+ unsigned char b_PWM)
{
+ struct addi_private *devpriv = dev->private;
int i_ReturnValue = 0;
unsigned int dw_Status;
@@ -2188,11 +2135,14 @@
| -8: High base timing selection is wrong |
+----------------------------------------------------------------------------+
*/
-
-int i_APCI1710_SetNewPWMTiming(struct comedi_device *dev,
- unsigned char b_ModulNbr,
- unsigned char b_PWM, unsigned char b_TimingUnit, unsigned int ul_LowTiming, unsigned int ul_HighTiming)
+static int i_APCI1710_SetNewPWMTiming(struct comedi_device *dev,
+ unsigned char b_ModulNbr,
+ unsigned char b_PWM,
+ unsigned char b_TimingUnit,
+ unsigned int ul_LowTiming,
+ unsigned int ul_HighTiming)
{
+ struct addi_private *devpriv = dev->private;
unsigned char b_ClockSelection;
int i_ReturnValue = 0;
unsigned int ul_LowTimerValue = 0;
@@ -3415,6 +3365,49 @@
}
/*
+ * Pwm Enable Disable and Set New Timing
+ */
+static int i_APCI1710_InsnWritePWM(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
+{
+ unsigned char b_WriteType;
+ int i_ReturnValue = 0;
+ b_WriteType = CR_CHAN(insn->chanspec);
+
+ switch (b_WriteType) {
+ case APCI1710_PWM_ENABLE:
+ i_ReturnValue = i_APCI1710_EnablePWM(dev,
+ (unsigned char) CR_AREF(insn->chanspec),
+ (unsigned char) data[0],
+ (unsigned char) data[1],
+ (unsigned char) data[2],
+ (unsigned char) data[3], (unsigned char) data[4], (unsigned char) data[5]);
+ break;
+
+ case APCI1710_PWM_DISABLE:
+ i_ReturnValue = i_APCI1710_DisablePWM(dev,
+ (unsigned char) CR_AREF(insn->chanspec), (unsigned char) data[0]);
+ break;
+
+ case APCI1710_PWM_NEWTIMING:
+ i_ReturnValue = i_APCI1710_SetNewPWMTiming(dev,
+ (unsigned char) CR_AREF(insn->chanspec),
+ (unsigned char) data[0],
+ (unsigned char) data[1], (unsigned int) data[2], (unsigned int) data[3]);
+ break;
+
+ default:
+ printk("Write Config Parameter Wrong\n");
+ }
+
+ if (i_ReturnValue >= 0)
+ i_ReturnValue = insn->n;
+ return i_ReturnValue;
+}
+
+/*
+----------------------------------------------------------------------------+
| Function Name : _INT_ i_APCI1710_GetPWMStatus |
| (unsigned char_ b_BoardHandle, |
@@ -3459,13 +3452,14 @@
| -6: PWM not enabled see function "i_APCI1710_EnablePWM"|
+----------------------------------------------------------------------------+
*/
-
-int i_APCI1710_InsnReadGetPWMStatus(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data)
+static int i_APCI1710_InsnReadGetPWMStatus(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
{
+ struct addi_private *devpriv = dev->private;
int i_ReturnValue = 0;
unsigned int dw_Status;
-
unsigned char b_ModulNbr;
unsigned char b_PWM;
unsigned char *pb_PWMOutputStatus;
@@ -3561,9 +3555,13 @@
return i_ReturnValue;
}
-int i_APCI1710_InsnBitsReadPWMInterrupt(struct comedi_device *dev,
- struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
+static int i_APCI1710_InsnBitsReadPWMInterrupt(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
{
+ struct addi_private *devpriv = dev->private;
+
data[0] = devpriv->s_InterruptParameters.
s_FIFOInterruptParameters[devpriv->
s_InterruptParameters.ui_Read].b_OldModuleMask;
diff --git a/drivers/staging/comedi/drivers/addi-data/APCI1710_Pwm.h b/drivers/staging/comedi/drivers/addi-data/APCI1710_Pwm.h
deleted file mode 100644
index d8ad0b9..0000000
--- a/drivers/staging/comedi/drivers/addi-data/APCI1710_Pwm.h
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- * Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module.
- *
- * ADDI-DATA GmbH
- * Dieselstrasse 3
- * D-77833 Ottersweier
- * Tel: +19(0)7223/9493-0
- * Fax: +49(0)7223/9493-92
- * http://www.addi-data.com
- * info@addi-data.com
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 of the License, or (at your option)
- * any later version.
- */
-
-#define APCI1710_30MHZ 30
-#define APCI1710_33MHZ 33
-#define APCI1710_40MHZ 40
-
-#define APCI1710_PWM_INIT 0
-#define APCI1710_PWM_GETINITDATA 1
-
-#define APCI1710_PWM_DISABLE 0
-#define APCI1710_PWM_ENABLE 1
-#define APCI1710_PWM_NEWTIMING 2
-
-int i_APCI1710_InsnConfigPWM(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-
-int i_APCI1710_InitPWM(struct comedi_device *dev,
- unsigned char b_ModulNbr,
- unsigned char b_PWM,
- unsigned char b_ClockSelection,
- unsigned char b_TimingUnit,
- unsigned int ul_LowTiming,
- unsigned int ul_HighTiming,
- unsigned int *pul_RealLowTiming, unsigned int *pul_RealHighTiming);
-
-int i_APCI1710_GetPWMInitialisation(struct comedi_device *dev,
- unsigned char b_ModulNbr,
- unsigned char b_PWM,
- unsigned char *pb_TimingUnit,
- unsigned int *pul_LowTiming,
- unsigned int *pul_HighTiming,
- unsigned char *pb_StartLevel,
- unsigned char *pb_StopMode,
- unsigned char *pb_StopLevel,
- unsigned char *pb_ExternGate,
- unsigned char *pb_InterruptEnable, unsigned char *pb_Enable);
-
-int i_APCI1710_InsnWritePWM(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-
-int i_APCI1710_EnablePWM(struct comedi_device *dev,
- unsigned char b_ModulNbr,
- unsigned char b_PWM,
- unsigned char b_StartLevel,
- unsigned char b_StopMode,
- unsigned char b_StopLevel, unsigned char b_ExternGate,
- unsigned char b_InterruptEnable);
-
-int i_APCI1710_SetNewPWMTiming(struct comedi_device *dev,
- unsigned char b_ModulNbr,
- unsigned char b_PWM, unsigned char b_TimingUnit,
- unsigned int ul_LowTiming, unsigned int ul_HighTiming);
-
-int i_APCI1710_DisablePWM(struct comedi_device *dev, unsigned char b_ModulNbr, unsigned char b_PWM);
-
-int i_APCI1710_InsnReadGetPWMStatus(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-
-int i_APCI1710_InsnBitsReadPWMInterrupt(struct comedi_device *dev,
- struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
diff --git a/drivers/staging/comedi/drivers/addi-data/APCI1710_Ssi.c b/drivers/staging/comedi/drivers/addi-data/APCI1710_Ssi.c
index c13b002..1e05732 100644
--- a/drivers/staging/comedi/drivers/addi-data/APCI1710_Ssi.c
+++ b/drivers/staging/comedi/drivers/addi-data/APCI1710_Ssi.c
@@ -40,13 +40,20 @@
+-----------------------------------------------------------------------+
*/
-/*
-+----------------------------------------------------------------------------+
-| Included files |
-+----------------------------------------------------------------------------+
-*/
+#define APCI1710_30MHZ 30
+#define APCI1710_33MHZ 33
+#define APCI1710_40MHZ 40
-#include "APCI1710_Ssi.h"
+#define APCI1710_BINARY_MODE 0x1
+#define APCI1710_GRAY_MODE 0x0
+
+#define APCI1710_SSI_READ1VALUE 1
+#define APCI1710_SSI_READALLVALUE 2
+
+#define APCI1710_SSI_SET_CHANNELON 0
+#define APCI1710_SSI_SET_CHANNELOFF 1
+#define APCI1710_SSI_READ_1CHANNEL 2
+#define APCI1710_SSI_READ_ALLCHANNEL 3
/*
+----------------------------------------------------------------------------+
@@ -119,9 +126,12 @@
+----------------------------------------------------------------------------+
*/
-int i_APCI1710_InsnConfigInitSSI(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data)
+static int i_APCI1710_InsnConfigInitSSI(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
{
+ struct addi_private *devpriv = dev->private;
int i_ReturnValue = 0;
unsigned int ui_TimerValue;
unsigned char b_ModulNbr, b_SSIProfile, b_PositionTurnLength, b_TurnCptLength,
@@ -386,9 +396,12 @@
+----------------------------------------------------------------------------+
*/
-int i_APCI1710_InsnReadSSIValue(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data)
+static int i_APCI1710_InsnReadSSIValue(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
{
+ struct addi_private *devpriv = dev->private;
int i_ReturnValue = 0;
unsigned char b_Cpt;
unsigned char b_Length;
@@ -719,9 +732,12 @@
+----------------------------------------------------------------------------+
*/
-int i_APCI1710_InsnBitsSSIDigitalIO(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data)
+static int i_APCI1710_InsnBitsSSIDigitalIO(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
{
+ struct addi_private *devpriv = dev->private;
int i_ReturnValue = 0;
unsigned int dw_StatusReg;
unsigned char b_ModulNbr;
@@ -729,6 +745,7 @@
unsigned char *pb_ChannelStatus;
unsigned char *pb_InputStatus;
unsigned char b_IOType;
+
i_ReturnValue = insn->n;
b_ModulNbr = (unsigned char) CR_AREF(insn->chanspec);
b_IOType = (unsigned char) data[0];
diff --git a/drivers/staging/comedi/drivers/addi-data/APCI1710_Ssi.h b/drivers/staging/comedi/drivers/addi-data/APCI1710_Ssi.h
deleted file mode 100644
index ef4d887..0000000
--- a/drivers/staging/comedi/drivers/addi-data/APCI1710_Ssi.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module.
- *
- * ADDI-DATA GmbH
- * Dieselstrasse 3
- * D-77833 Ottersweier
- * Tel: +19(0)7223/9493-0
- * Fax: +49(0)7223/9493-92
- * http://www.addi-data.com
- * info@addi-data.com
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 of the License, or (at your option)
- * any later version.
- */
-
-#define APCI1710_30MHZ 30
-#define APCI1710_33MHZ 33
-#define APCI1710_40MHZ 40
-
-#define APCI1710_BINARY_MODE 0x1
-#define APCI1710_GRAY_MODE 0x0
-
-#define APCI1710_SSI_READ1VALUE 1
-#define APCI1710_SSI_READALLVALUE 2
-
-#define APCI1710_SSI_SET_CHANNELON 0
-#define APCI1710_SSI_SET_CHANNELOFF 1
-#define APCI1710_SSI_READ_1CHANNEL 2
-#define APCI1710_SSI_READ_ALLCHANNEL 3
-
-/*
- * SSI INISIALISATION FUNCTION
- */
-int i_APCI1710_InsnConfigInitSSI(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-
-int i_APCI1710_InsnReadSSIValue(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-
-int i_APCI1710_InsnBitsSSIDigitalIO(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
diff --git a/drivers/staging/comedi/drivers/addi-data/APCI1710_Tor.c b/drivers/staging/comedi/drivers/addi-data/APCI1710_Tor.c
index 0e6affd..3bc9826 100644
--- a/drivers/staging/comedi/drivers/addi-data/APCI1710_Tor.c
+++ b/drivers/staging/comedi/drivers/addi-data/APCI1710_Tor.c
@@ -52,13 +52,22 @@
+-----------------------------------------------------------------------+
*/
-/*
-+----------------------------------------------------------------------------+
-| Included files |
-+----------------------------------------------------------------------------+
-*/
+#define APCI1710_30MHZ 30
+#define APCI1710_33MHZ 33
+#define APCI1710_40MHZ 40
-#include "APCI1710_Tor.h"
+#define APCI1710_GATE_INPUT 10
+
+#define APCI1710_TOR_SIMPLE_MODE 2
+#define APCI1710_TOR_DOUBLE_MODE 3
+#define APCI1710_TOR_QUADRUPLE_MODE 4
+
+#define APCI1710_SINGLE 0
+#define APCI1710_CONTINUOUS 1
+
+#define APCI1710_TOR_GETPROGRESSSTATUS 0
+#define APCI1710_TOR_GETCOUNTERVALUE 1
+#define APCI1710_TOR_READINTERRUPT 2
/*
+----------------------------------------------------------------------------+
@@ -130,9 +139,12 @@
+----------------------------------------------------------------------------+
*/
-int i_APCI1710_InsnConfigInitTorCounter(struct comedi_device *dev,
- struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
+static int i_APCI1710_InsnConfigInitTorCounter(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
{
+ struct addi_private *devpriv = dev->private;
int i_ReturnValue = 0;
unsigned int ul_TimerValue = 0;
unsigned int dw_Command;
@@ -987,9 +999,12 @@
+----------------------------------------------------------------------------+
*/
-int i_APCI1710_InsnWriteEnableDisableTorCounter(struct comedi_device *dev,
- struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
+static int i_APCI1710_InsnWriteEnableDisableTorCounter(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
{
+ struct addi_private *devpriv = dev->private;
int i_ReturnValue = 0;
unsigned int dw_Status;
unsigned int dw_DummyRead;
@@ -1460,9 +1475,12 @@
+----------------------------------------------------------------------------+
*/
-int i_APCI1710_InsnReadGetTorCounterInitialisation(struct comedi_device *dev,
- struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
+static int i_APCI1710_InsnReadGetTorCounterInitialisation(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
{
+ struct addi_private *devpriv = dev->private;
int i_ReturnValue = 0;
unsigned int dw_Status;
unsigned char b_ModulNbr;
@@ -1700,13 +1718,15 @@
+----------------------------------------------------------------------------+
*/
-int i_APCI1710_InsnBitsGetTorCounterProgressStatusAndValue(struct comedi_device *dev,
- struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
+static int i_APCI1710_InsnBitsGetTorCounterProgressStatusAndValue(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
{
+ struct addi_private *devpriv = dev->private;
int i_ReturnValue = 0;
unsigned int dw_Status;
unsigned int dw_TimeOut = 0;
-
unsigned char b_ModulNbr;
unsigned char b_TorCounter;
unsigned char b_ReadType;
diff --git a/drivers/staging/comedi/drivers/addi-data/APCI1710_Tor.h b/drivers/staging/comedi/drivers/addi-data/APCI1710_Tor.h
deleted file mode 100644
index 537d475..0000000
--- a/drivers/staging/comedi/drivers/addi-data/APCI1710_Tor.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module.
- *
- * ADDI-DATA GmbH
- * Dieselstrasse 3
- * D-77833 Ottersweier
- * Tel: +19(0)7223/9493-0
- * Fax: +49(0)7223/9493-92
- * http://www.addi-data.com
- * info@addi-data.com
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 of the License, or (at your option)
- * any later version.
- */
-
-#define APCI1710_30MHZ 30
-#define APCI1710_33MHZ 33
-#define APCI1710_40MHZ 40
-
-#define APCI1710_GATE_INPUT 10
-
-#define APCI1710_TOR_SIMPLE_MODE 2
-#define APCI1710_TOR_DOUBLE_MODE 3
-#define APCI1710_TOR_QUADRUPLE_MODE 4
-
-#define APCI1710_SINGLE 0
-#define APCI1710_CONTINUOUS 1
-
-#define APCI1710_TOR_GETPROGRESSSTATUS 0
-#define APCI1710_TOR_GETCOUNTERVALUE 1
-#define APCI1710_TOR_READINTERRUPT 2
-
-/*
- * TOR_COUNTER INISIALISATION FUNCTION
- */
-int i_APCI1710_InsnConfigInitTorCounter(struct comedi_device *dev,
- struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-
-int i_APCI1710_InsnWriteEnableDisableTorCounter(struct comedi_device *dev,
- struct comedi_subdevice *s,
- struct comedi_insn *insn,
- unsigned int *data);
-
-int i_APCI1710_InsnReadGetTorCounterInitialisation(struct comedi_device *dev,
- struct comedi_subdevice *s,
- struct comedi_insn *insn,
- unsigned int *data);
-/*
- * TOR_COUNTER READ FUNCTION
- */
-int i_APCI1710_InsnBitsGetTorCounterProgressStatusAndValue(struct comedi_device *dev,
- struct comedi_subdevice *s,
- struct comedi_insn *insn,
- unsigned int *data);
diff --git a/drivers/staging/comedi/drivers/addi-data/APCI1710_Ttl.c b/drivers/staging/comedi/drivers/addi-data/APCI1710_Ttl.c
index 9e177f4..c8238b8 100644
--- a/drivers/staging/comedi/drivers/addi-data/APCI1710_Ttl.c
+++ b/drivers/staging/comedi/drivers/addi-data/APCI1710_Ttl.c
@@ -52,13 +52,11 @@
+-----------------------------------------------------------------------+
*/
-/*
-+----------------------------------------------------------------------------+
-| Included files |
-+----------------------------------------------------------------------------+
-*/
+#define APCI1710_TTL_INIT 0
+#define APCI1710_TTL_INITDIRECTION 1
-#include "APCI1710_Ttl.h"
+#define APCI1710_TTL_READCHANNEL 0
+#define APCI1710_TTL_READPORT 1
/*
+----------------------------------------------------------------------------+
@@ -100,9 +98,12 @@
+----------------------------------------------------------------------------+
*/
-int i_APCI1710_InsnConfigInitTTLIO(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data)
+static int i_APCI1710_InsnConfigInitTTLIO(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
{
+ struct addi_private *devpriv = dev->private;
int i_ReturnValue = 0;
unsigned char b_ModulNbr;
unsigned char b_InitType;
@@ -406,9 +407,12 @@
+----------------------------------------------------------------------------+
*/
-int i_APCI1710_InsnBitsReadTTLIO(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data)
+static int i_APCI1710_InsnBitsReadTTLIO(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
{
+ struct addi_private *devpriv = dev->private;
int i_ReturnValue = 0;
unsigned int dw_StatusReg;
unsigned char b_ModulNbr;
@@ -655,9 +659,12 @@
+----------------------------------------------------------------------------+
*/
-int i_APCI1710_InsnReadTTLIOAllPortValue(struct comedi_device *dev,
- struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
+static int i_APCI1710_InsnReadTTLIOAllPortValue(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
{
+ struct addi_private *devpriv = dev->private;
int i_ReturnValue = 0;
unsigned int dw_StatusReg;
unsigned char b_ModulNbr;
@@ -825,9 +832,12 @@
+----------------------------------------------------------------------------+
*/
-int i_APCI1710_InsnWriteSetTTLIOChlOnOff(struct comedi_device *dev,
- struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
+static int i_APCI1710_InsnWriteSetTTLIOChlOnOff(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
{
+ struct addi_private *devpriv = dev->private;
int i_ReturnValue = 0;
unsigned int dw_StatusReg = 0;
unsigned char b_ModulNbr;
diff --git a/drivers/staging/comedi/drivers/addi-data/APCI1710_Ttl.h b/drivers/staging/comedi/drivers/addi-data/APCI1710_Ttl.h
deleted file mode 100644
index adcab82..0000000
--- a/drivers/staging/comedi/drivers/addi-data/APCI1710_Ttl.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module.
- *
- * ADDI-DATA GmbH
- * Dieselstrasse 3
- * D-77833 Ottersweier
- * Tel: +19(0)7223/9493-0
- * Fax: +49(0)7223/9493-92
- * http://www.addi-data.com
- * info@addi-data.com
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 of the License, or (at your option)
- * any later version.
- */
-
-#define APCI1710_TTL_INIT 0
-#define APCI1710_TTL_INITDIRECTION 1
-
-#define APCI1710_TTL_READCHANNEL 0
-#define APCI1710_TTL_READPORT 1
-
-/*
- * TTL INISIALISATION FUNCTION
- */
-int i_APCI1710_InsnConfigInitTTLIO(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-
-/*
- * TTL INPUT FUNCTION
- */
-int i_APCI1710_InsnBitsReadTTLIO(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-int i_APCI1710_InsnReadTTLIOAllPortValue(struct comedi_device *dev,
- struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-
-/*
- * TTL OUTPUT FUNCTIONS
- */
-int i_APCI1710_InsnWriteSetTTLIOChlOnOff(struct comedi_device *dev,
- struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
diff --git a/drivers/staging/comedi/drivers/addi-data/addi_amcc_s5933.h b/drivers/staging/comedi/drivers/addi-data/addi_amcc_s5933.h
deleted file mode 100644
index 95f7dc6..0000000
--- a/drivers/staging/comedi/drivers/addi-data/addi_amcc_s5933.h
+++ /dev/null
@@ -1,469 +0,0 @@
-/*
- * Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module.
- *
- * ADDI-DATA GmbH
- * Dieselstrasse 3
- * D-77833 Ottersweier
- * Tel: +19(0)7223/9493-0
- * Fax: +49(0)7223/9493-92
- * http://www.addi-data.com
- * info@addi-data.com
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 of the License, or (at your option)
- * any later version.
- */
-
-/* Header file for AMCC s 5933 */
-
-#ifndef _AMCC_S5933_H_
-#define _AMCC_S5933_H_
-
-#include "../../comedidev.h"
-
-/* written on base0 */
-#define FIFO_ADVANCE_ON_BYTE_2 0x20000000
-
-/* added for step 6 dma written on base2 */
-#define AMWEN_ENABLE 0x02
-
-#define A2P_FIFO_WRITE_ENABLE 0x01
-
-/* for transfer count enable bit */
-#define AGCSTS_TC_ENABLE 0x10000000
-
-/*
- * ADDON RELATED ADDITIONS
- */
-/* Constant */
-#define APCI3120_ENABLE_TRANSFER_ADD_ON_LOW 0x00
-#define APCI3120_ENABLE_TRANSFER_ADD_ON_HIGH 0x1200
-#define APCI3120_A2P_FIFO_MANAGEMENT 0x04000400L
-#define APCI3120_AMWEN_ENABLE 0x02
-#define APCI3120_A2P_FIFO_WRITE_ENABLE 0x01
-#define APCI3120_FIFO_ADVANCE_ON_BYTE_2 0x20000000L
-#define APCI3120_ENABLE_WRITE_TC_INT 0x00004000L
-#define APCI3120_CLEAR_WRITE_TC_INT 0x00040000L
-#define APCI3120_DISABLE_AMWEN_AND_A2P_FIFO_WRITE 0x0
-#define APCI3120_DISABLE_BUS_MASTER_ADD_ON 0x0
-#define APCI3120_DISABLE_BUS_MASTER_PCI 0x0
-
-/* ADD_ON ::: this needed since apci supports 16 bit interface to add on */
-#define APCI3120_ADD_ON_AGCSTS_LOW 0x3C
-#define APCI3120_ADD_ON_AGCSTS_HIGH (APCI3120_ADD_ON_AGCSTS_LOW + 2)
-#define APCI3120_ADD_ON_MWAR_LOW 0x24
-#define APCI3120_ADD_ON_MWAR_HIGH (APCI3120_ADD_ON_MWAR_LOW + 2)
-#define APCI3120_ADD_ON_MWTC_LOW 0x058
-#define APCI3120_ADD_ON_MWTC_HIGH (APCI3120_ADD_ON_MWTC_LOW + 2)
-
-/* AMCC */
-#define APCI3120_AMCC_OP_MCSR 0x3C
-#define APCI3120_AMCC_OP_REG_INTCSR 0x38
-
-/*
- * AMCC Operation Register Offsets - PCI
- */
-#define AMCC_OP_REG_OMB1 0x00
-#define AMCC_OP_REG_OMB2 0x04
-#define AMCC_OP_REG_OMB3 0x08
-#define AMCC_OP_REG_OMB4 0x0c
-#define AMCC_OP_REG_IMB1 0x10
-#define AMCC_OP_REG_IMB2 0x14
-#define AMCC_OP_REG_IMB3 0x18
-#define AMCC_OP_REG_IMB4 0x1c
-#define AMCC_OP_REG_FIFO 0x20
-#define AMCC_OP_REG_MWAR 0x24
-#define AMCC_OP_REG_MWTC 0x28
-#define AMCC_OP_REG_MRAR 0x2c
-#define AMCC_OP_REG_MRTC 0x30
-#define AMCC_OP_REG_MBEF 0x34
-#define AMCC_OP_REG_INTCSR 0x38
-/* int source */
-#define AMCC_OP_REG_INTCSR_SRC (AMCC_OP_REG_INTCSR + 2)
-/* FIFO ctrl */
-#define AMCC_OP_REG_INTCSR_FEC (AMCC_OP_REG_INTCSR + 3)
-#define AMCC_OP_REG_MCSR 0x3c
-/* Data in byte 2 */
-#define AMCC_OP_REG_MCSR_NVDATA (AMCC_OP_REG_MCSR + 2)
-/* Command in byte 3 */
-#define AMCC_OP_REG_MCSR_NVCMD (AMCC_OP_REG_MCSR + 3)
-
-#define AMCC_FIFO_DEPTH_DWORD 8
-#define AMCC_FIFO_DEPTH_BYTES (8 * sizeof(u32))
-
-/*
- * AMCC Operation Registers Size - PCI
- */
-#define AMCC_OP_REG_SIZE 64 /* in bytes */
-
-/*
- * AMCC Operation Register Offsets - Add-on
- */
-#define AMCC_OP_REG_AIMB1 0x00
-#define AMCC_OP_REG_AIMB2 0x04
-#define AMCC_OP_REG_AIMB3 0x08
-#define AMCC_OP_REG_AIMB4 0x0c
-#define AMCC_OP_REG_AOMB1 0x10
-#define AMCC_OP_REG_AOMB2 0x14
-#define AMCC_OP_REG_AOMB3 0x18
-#define AMCC_OP_REG_AOMB4 0x1c
-#define AMCC_OP_REG_AFIFO 0x20
-#define AMCC_OP_REG_AMWAR 0x24
-#define AMCC_OP_REG_APTA 0x28
-#define AMCC_OP_REG_APTD 0x2c
-#define AMCC_OP_REG_AMRAR 0x30
-#define AMCC_OP_REG_AMBEF 0x34
-#define AMCC_OP_REG_AINT 0x38
-#define AMCC_OP_REG_AGCSTS 0x3c
-#define AMCC_OP_REG_AMWTC 0x58
-#define AMCC_OP_REG_AMRTC 0x5c
-
-/*
- * AMCC - Add-on General Control/Status Register
- */
-#define AGCSTS_CONTROL_MASK 0xfffff000
-#define AGCSTS_NV_ACC_MASK 0xe0000000
-#define AGCSTS_RESET_MASK 0x0e000000
-#define AGCSTS_NV_DA_MASK 0x00ff0000
-#define AGCSTS_BIST_MASK 0x0000f000
-#define AGCSTS_STATUS_MASK 0x000000ff
-#define AGCSTS_TCZERO_MASK 0x000000c0
-#define AGCSTS_FIFO_ST_MASK 0x0000003f
-
-#define AGCSTS_RESET_MBFLAGS 0x08000000
-#define AGCSTS_RESET_P2A_FIFO 0x04000000
-#define AGCSTS_RESET_A2P_FIFO 0x02000000
-#define AGCSTS_RESET_FIFOS (AGCSTS_RESET_A2P_FIFO | AGCSTS_RESET_P2A_FIFO)
-
-#define AGCSTS_A2P_TCOUNT 0x00000080
-#define AGCSTS_P2A_TCOUNT 0x00000040
-
-#define AGCSTS_FS_P2A_EMPTY 0x00000020
-#define AGCSTS_FS_P2A_HALF 0x00000010
-#define AGCSTS_FS_P2A_FULL 0x00000008
-
-#define AGCSTS_FS_A2P_EMPTY 0x00000004
-#define AGCSTS_FS_A2P_HALF 0x00000002
-#define AGCSTS_FS_A2P_FULL 0x00000001
-
-/*
- * AMCC - Add-on Interrupt Control/Status Register
- */
-#define AINT_INT_MASK 0x00ff0000
-#define AINT_SEL_MASK 0x0000ffff
-#define AINT_IS_ENSEL_MASK 0x00001f1f
-
-#define AINT_INT_ASSERTED 0x00800000
-#define AINT_BM_ERROR 0x00200000
-#define AINT_BIST_INT 0x00100000
-
-#define AINT_RT_COMPLETE 0x00080000
-#define AINT_WT_COMPLETE 0x00040000
-
-#define AINT_OUT_MB_INT 0x00020000
-#define AINT_IN_MB_INT 0x00010000
-
-#define AINT_READ_COMPL 0x00008000
-#define AINT_WRITE_COMPL 0x00004000
-
-#define AINT_OMB_ENABLE 0x00001000
-#define AINT_OMB_SELECT 0x00000c00
-#define AINT_OMB_BYTE 0x00000300
-
-#define AINT_IMB_ENABLE 0x00000010
-#define AINT_IMB_SELECT 0x0000000c
-#define AINT_IMB_BYTE 0x00000003
-
-/* Enable Bus Mastering */
-#define EN_A2P_TRANSFERS 0x00000400
-/* FIFO Flag Reset */
-#define RESET_A2P_FLAGS 0x04000000L
-/* FIFO Relative Priority */
-#define A2P_HI_PRIORITY 0x00000100L
-/* Identify Interrupt Sources */
-#define ANY_S593X_INT 0x00800000L
-#define READ_TC_INT 0x00080000L
-#define WRITE_TC_INT 0x00040000L
-#define IN_MB_INT 0x00020000L
-#define MASTER_ABORT_INT 0x00100000L
-#define TARGET_ABORT_INT 0x00200000L
-#define BUS_MASTER_INT 0x00200000L
-
-/****************************************************************************/
-
-struct pcilst_struct {
- struct pcilst_struct *next;
- int used;
- struct pci_dev *pcidev;
- unsigned short vendor;
- unsigned short device;
- unsigned char pci_bus;
- unsigned char pci_slot;
- unsigned char pci_func;
- resource_size_t io_addr[5];
- unsigned int irq;
-};
-
-/* ptr to root list of all amcc devices */
-static struct pcilst_struct *amcc_devices;
-
-static const int i_ADDIDATADeviceID[] = { 0x15B8, 0x10E8 };
-
-/****************************************************************************/
-
-void v_pci_card_list_init(unsigned short pci_vendor, char display);
-void v_pci_card_list_cleanup(unsigned short pci_vendor);
-struct pcilst_struct *ptr_find_free_pci_card_by_device(unsigned short vendor_id,
- unsigned short
- device_id);
-int i_find_free_pci_card_by_position(unsigned short vendor_id,
- unsigned short device_id,
- unsigned short pci_bus,
- unsigned short pci_slot,
- struct pcilst_struct **card);
-struct pcilst_struct *ptr_select_and_alloc_pci_card(unsigned short vendor_id,
- unsigned short device_id,
- unsigned short pci_bus,
- unsigned short pci_slot,
- int i_Master);
-
-int pci_card_alloc(struct pcilst_struct *amcc, int master);
-int i_pci_card_free(struct pcilst_struct *amcc);
-void v_pci_card_list_display(void);
-int i_pci_card_data(struct pcilst_struct *amcc,
- unsigned char *pci_bus, unsigned char *pci_slot,
- unsigned char *pci_func, resource_size_t * io_addr,
- unsigned int *irq);
-
-/****************************************************************************/
-
-/* build list of amcc cards in this system */
-void v_pci_card_list_init(unsigned short pci_vendor, char display)
-{
- struct pci_dev *pcidev = NULL;
- struct pcilst_struct *amcc, *last;
- int i;
- int i_Count = 0;
- amcc_devices = NULL;
- last = NULL;
-
- for_each_pci_dev(pcidev) {
- for (i_Count = 0; i_Count < 2; i_Count++) {
- pci_vendor = i_ADDIDATADeviceID[i_Count];
- if (pcidev->vendor == pci_vendor) {
- amcc = kzalloc(sizeof(*amcc), GFP_KERNEL);
- if (amcc == NULL)
- continue;
-
- amcc->pcidev = pcidev;
- if (last)
- last->next = amcc;
- else
- amcc_devices = amcc;
- last = amcc;
-
- amcc->vendor = pcidev->vendor;
- amcc->device = pcidev->device;
- amcc->pci_bus = pcidev->bus->number;
- amcc->pci_slot = PCI_SLOT(pcidev->devfn);
- amcc->pci_func = PCI_FUNC(pcidev->devfn);
- /* Note: resources may be invalid if PCI device
- * not enabled, but they are corrected in
- * pci_card_alloc. */
- for (i = 0; i < 5; i++)
- amcc->io_addr[i] =
- pci_resource_start(pcidev, i);
- amcc->irq = pcidev->irq;
-
- }
- }
- }
-
- if (display)
- v_pci_card_list_display();
-}
-
-/****************************************************************************/
-/* free up list of amcc cards in this system */
-void v_pci_card_list_cleanup(unsigned short pci_vendor)
-{
- struct pcilst_struct *amcc, *next;
-
- for (amcc = amcc_devices; amcc; amcc = next) {
- next = amcc->next;
- kfree(amcc);
- }
-
- amcc_devices = NULL;
-}
-
-/****************************************************************************/
-/* find first unused card with this device_id */
-struct pcilst_struct *ptr_find_free_pci_card_by_device(unsigned short vendor_id,
- unsigned short device_id)
-{
- struct pcilst_struct *amcc, *next;
-
- for (amcc = amcc_devices; amcc; amcc = next) {
- next = amcc->next;
- if ((!amcc->used) && (amcc->device == device_id)
- && (amcc->vendor == vendor_id))
- return amcc;
-
- }
-
- return NULL;
-}
-
-/****************************************************************************/
-/* find card on requested position */
-int i_find_free_pci_card_by_position(unsigned short vendor_id,
- unsigned short device_id,
- unsigned short pci_bus,
- unsigned short pci_slot,
- struct pcilst_struct **card)
-{
- struct pcilst_struct *amcc, *next;
-
- *card = NULL;
- for (amcc = amcc_devices; amcc; amcc = next) {
- next = amcc->next;
- if ((amcc->vendor == vendor_id) && (amcc->device == device_id)
- && (amcc->pci_bus == pci_bus)
- && (amcc->pci_slot == pci_slot)) {
- if (!(amcc->used)) {
- *card = amcc;
- return 0; /* ok, card is found */
- } else {
- printk(" - \nCard on requested position is used b:s %d:%d!\n",
- pci_bus, pci_slot);
- return 2; /* card exist but is used */
- }
- }
- }
-
- /* no card found */
- return 1;
-}
-
-/****************************************************************************/
-/* mark card as used */
-int pci_card_alloc(struct pcilst_struct *amcc, int master)
-{
- int i;
-
- if (!amcc)
- return -1;
-
- if (amcc->used)
- return 1;
- if (comedi_pci_enable(amcc->pcidev, "addi_amcc_s5933"))
- return -1;
- /* Resources will be accurate now. */
- for (i = 0; i < 5; i++)
- amcc->io_addr[i] = pci_resource_start(amcc->pcidev, i);
- if (master)
- pci_set_master(amcc->pcidev);
- amcc->used = 1;
-
- return 0;
-}
-
-/****************************************************************************/
-/* mark card as free */
-int i_pci_card_free(struct pcilst_struct *amcc)
-{
- if (!amcc)
- return -1;
-
- if (!amcc->used)
- return 1;
- amcc->used = 0;
- comedi_pci_disable(amcc->pcidev);
- return 0;
-}
-
-/****************************************************************************/
-/* display list of found cards */
-void v_pci_card_list_display(void)
-{
- struct pcilst_struct *amcc, *next;
-
- printk(KERN_DEBUG "List of pci cards\n");
- printk(KERN_DEBUG "bus:slot:func vendor device io_amcc io_daq irq used\n");
-
- for (amcc = amcc_devices; amcc; amcc = next) {
- next = amcc->next;
- printk
- ("%2d %2d %2d 0x%4x 0x%4x 0x%8llx 0x%8llx %2u %2d\n",
- amcc->pci_bus, amcc->pci_slot, amcc->pci_func,
- amcc->vendor, amcc->device,
- (unsigned long long)amcc->io_addr[0],
- (unsigned long long)amcc->io_addr[2], amcc->irq,
- amcc->used);
-
- }
-}
-
-/****************************************************************************/
-/* return all card information for driver */
-int i_pci_card_data(struct pcilst_struct *amcc,
- unsigned char *pci_bus, unsigned char *pci_slot,
- unsigned char *pci_func, resource_size_t * io_addr,
- unsigned int *irq)
-{
- int i;
-
- if (!amcc)
- return -1;
- *pci_bus = amcc->pci_bus;
- *pci_slot = amcc->pci_slot;
- *pci_func = amcc->pci_func;
- for (i = 0; i < 5; i++)
- io_addr[i] = amcc->io_addr[i];
- *irq = amcc->irq;
- return 0;
-}
-
-/****************************************************************************/
-/* select and alloc card */
-struct pcilst_struct *ptr_select_and_alloc_pci_card(unsigned short vendor_id,
- unsigned short device_id,
- unsigned short pci_bus,
- unsigned short pci_slot,
- int i_Master)
-{
- struct pcilst_struct *card;
-
- if ((pci_bus < 1) & (pci_slot < 1)) {
- /* use autodetection */
- card = ptr_find_free_pci_card_by_device(vendor_id, device_id);
- if (card == NULL) {
- printk(" - Unused card not found in system!\n");
- return NULL;
- }
- } else {
- switch (i_find_free_pci_card_by_position(vendor_id, device_id,
- pci_bus, pci_slot,
- &card)) {
- case 1:
- printk(" - Card not found on requested position b:s %d:%d!\n",
- pci_bus, pci_slot);
- return NULL;
- case 2:
- printk(" - Card on requested position is used b:s %d:%d!\n",
- pci_bus, pci_slot);
- return NULL;
- }
- }
-
- if (pci_card_alloc(card, i_Master) != 0) {
- printk(" - Can't allocate card!\n");
- return NULL;
-
- }
-
- return card;
-}
-#endif
diff --git a/drivers/staging/comedi/drivers/addi-data/addi_common.c b/drivers/staging/comedi/drivers/addi-data/addi_common.c
index 99a96bd..90cc432 100644
--- a/drivers/staging/comedi/drivers/addi-data/addi_common.c
+++ b/drivers/staging/comedi/drivers/addi-data/addi_common.c
@@ -36,1518 +36,107 @@
+-----------------------------------------------------------------------+
| Description : ADDI COMMON Main Module |
+-----------------------------------------------------------------------+
- | CONFIG OPTIONS |
- | option[0] - PCI bus number - if bus number and slot number are 0, |
- | then driver search for first unused card |
- | option[1] - PCI slot number |
- | |
- | option[2] = 0 - DMA ENABLE |
- | = 1 - DMA DISABLE |
- +----------+-----------+------------------------------------------------+
*/
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/errno.h>
-#include <linux/ioport.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/timex.h>
-#include <linux/timer.h>
-#include <linux/pci.h>
-#include <linux/gfp.h>
-#include <linux/io.h>
-#include "../../comedidev.h"
-#if defined(CONFIG_APCI_1710) || defined(CONFIG_APCI_3200) || defined(CONFIG_APCI_3300)
-#include <asm/i387.h>
-#endif
-#include "../comedi_fc.h"
-
-#include "addi_common.h"
-#include "addi_amcc_s5933.h"
-
-#ifndef ADDIDATA_DRIVER_NAME
-#define ADDIDATA_DRIVER_NAME "addi_common"
-#endif
-
-/* Update-0.7.57->0.7.68MODULE_AUTHOR("ADDI-DATA GmbH <info@addi-data.com>"); */
-/* Update-0.7.57->0.7.68MODULE_DESCRIPTION("Comedi ADDI-DATA module"); */
-/* Update-0.7.57->0.7.68MODULE_LICENSE("GPL"); */
-
-#define devpriv ((struct addi_private *)dev->private)
-#define this_board ((const struct addi_board *)dev->board_ptr)
-
-#if defined(CONFIG_APCI_1710) || defined(CONFIG_APCI_3200) || defined(CONFIG_APCI_3300)
-/* BYTE b_SaveFPUReg [94]; */
-
-void fpu_begin(void)
-{
- /* asm ("fstenv b_SaveFPUReg"); */
- kernel_fpu_begin();
-}
-
-void fpu_end(void)
-{
- /* asm ("frstor b_SaveFPUReg"); */
- kernel_fpu_end();
-}
-#endif
-
-#include "addi_eeprom.c"
-#if (defined (CONFIG_APCI_3120) || defined (CONFIG_APCI_3001))
-#include "hwdrv_apci3120.c"
-#endif
-#ifdef CONFIG_APCI_1032
-#include "hwdrv_apci1032.c"
-#endif
-#ifdef CONFIG_APCI_1516
-#include "hwdrv_apci1516.c"
-#endif
-#ifdef CONFIG_APCI_2016
-#include "hwdrv_apci2016.c"
-#endif
-#ifdef CONFIG_APCI_2032
-#include "hwdrv_apci2032.c"
-#endif
-#ifdef CONFIG_APCI_2200
-#include "hwdrv_apci2200.c"
-#endif
-#ifdef CONFIG_APCI_1564
-#include "hwdrv_apci1564.c"
-#endif
-#ifdef CONFIG_APCI_1500
-#include "hwdrv_apci1500.c"
-#endif
-#ifdef CONFIG_APCI_3501
-#include "hwdrv_apci3501.c"
-#endif
-#ifdef CONFIG_APCI_035
-#include "hwdrv_apci035.c"
-#endif
-#if (defined (CONFIG_APCI_3200) || defined (CONFIG_APCI_3300))
-#include "hwdrv_apci3200.c"
-#endif
-#ifdef CONFIG_APCI_1710
-#include "hwdrv_APCI1710.c"
-#endif
-#ifdef CONFIG_APCI_16XX
-#include "hwdrv_apci16xx.c"
-#endif
-#ifdef CONFIG_APCI_3XXX
-#include "hwdrv_apci3xxx.c"
-#endif
-
#ifndef COMEDI_SUBD_TTLIO
#define COMEDI_SUBD_TTLIO 11 /* Digital Input Output But TTL */
#endif
-static DEFINE_PCI_DEVICE_TABLE(addi_apci_tbl) = {
-#ifdef CONFIG_APCI_3120
- {PCI_DEVICE(APCI3120_BOARD_VENDOR_ID, 0x818D)},
-#endif
-#ifdef CONFIG_APCI_1032
- {PCI_DEVICE(APCI1032_BOARD_VENDOR_ID, 0x1003)},
-#endif
-#ifdef CONFIG_APCI_1516
- {PCI_DEVICE(APCI1516_BOARD_VENDOR_ID, 0x1001)},
-#endif
-#ifdef CONFIG_APCI_2016
- {PCI_DEVICE(APCI2016_BOARD_VENDOR_ID, 0x1002)},
-#endif
-#ifdef CONFIG_APCI_2032
- {PCI_DEVICE(APCI2032_BOARD_VENDOR_ID, 0x1004)},
-#endif
-#ifdef CONFIG_APCI_2200
- {PCI_DEVICE(APCI2200_BOARD_VENDOR_ID, 0x1005)},
-#endif
-#ifdef CONFIG_APCI_1564
- {PCI_DEVICE(APCI1564_BOARD_VENDOR_ID, 0x1006)},
-#endif
-#ifdef CONFIG_APCI_1500
- {PCI_DEVICE(APCI1500_BOARD_VENDOR_ID, 0x80fc)},
-#endif
-#ifdef CONFIG_APCI_3001
- {PCI_DEVICE(APCI3120_BOARD_VENDOR_ID, 0x828D)},
-#endif
-#ifdef CONFIG_APCI_3501
- {PCI_DEVICE(APCI3501_BOARD_VENDOR_ID, 0x3001)},
-#endif
-#ifdef CONFIG_APCI_035
- {PCI_DEVICE(APCI035_BOARD_VENDOR_ID, 0x0300)},
-#endif
-#ifdef CONFIG_APCI_3200
- {PCI_DEVICE(APCI3200_BOARD_VENDOR_ID, 0x3000)},
-#endif
-#ifdef CONFIG_APCI_3300
- {PCI_DEVICE(APCI3200_BOARD_VENDOR_ID, 0x3007)},
-#endif
-#ifdef CONFIG_APCI_1710
- {PCI_DEVICE(APCI1710_BOARD_VENDOR_ID, APCI1710_BOARD_DEVICE_ID)},
-#endif
-#ifdef CONFIG_APCI_16XX
- {PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x1009)},
- {PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x100A)},
-#endif
-#ifdef CONFIG_APCI_3XXX
- {PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x3010)},
- {PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x300F)},
- {PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x300E)},
- {PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x3013)},
- {PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x3014)},
- {PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x3015)},
- {PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x3016)},
- {PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x3017)},
- {PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x3018)},
- {PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x3019)},
- {PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x301A)},
- {PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x301B)},
- {PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x301C)},
- {PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x301D)},
- {PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x301E)},
- {PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x301F)},
- {PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x3020)},
- {PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x3021)},
- {PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x3022)},
- {PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x3023)},
- {PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x300B)},
- {PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x3002)},
- {PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x3003)},
- {PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x3004)},
- {PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x3024)},
-#endif
- {0}
-};
-
-MODULE_DEVICE_TABLE(pci, addi_apci_tbl);
-
-static const struct addi_board boardtypes[] = {
-#ifdef CONFIG_APCI_3120
- {
- .pc_DriverName = "apci3120",
- .i_VendorId = APCI3120_BOARD_VENDOR_ID,
- .i_DeviceId = 0x818D,
- .i_IorangeBase0 = AMCC_OP_REG_SIZE,
- .i_IorangeBase1 = APCI3120_ADDRESS_RANGE,
- .i_IorangeBase2 = 8,
- .i_PCIEeprom = ADDIDATA_NO_EEPROM,
- .i_NbrAiChannel = 16,
- .i_NbrAiChannelDiff = 8,
- .i_AiChannelList = 16,
- .i_NbrAoChannel = 8,
- .i_AiMaxdata = 0xffff,
- .i_AoMaxdata = 0x3fff,
- .pr_AiRangelist = &range_apci3120_ai,
- .pr_AoRangelist = &range_apci3120_ao,
- .i_NbrDiChannel = 4,
- .i_NbrDoChannel = 4,
- .i_DoMaxdata = 0x0f,
- .i_Dma = 1,
- .i_Timer = 1,
- .b_AvailableConvertUnit = 1,
- .ui_MinAcquisitiontimeNs = 10000,
- .ui_MinDelaytimeNs = 100000,
- .interrupt = v_APCI3120_Interrupt,
- .reset = i_APCI3120_Reset,
- .ai_config = i_APCI3120_InsnConfigAnalogInput,
- .ai_read = i_APCI3120_InsnReadAnalogInput,
- .ai_cmdtest = i_APCI3120_CommandTestAnalogInput,
- .ai_cmd = i_APCI3120_CommandAnalogInput,
- .ai_cancel = i_APCI3120_StopCyclicAcquisition,
- .ao_write = i_APCI3120_InsnWriteAnalogOutput,
- .di_read = i_APCI3120_InsnReadDigitalInput,
- .di_bits = i_APCI3120_InsnBitsDigitalInput,
- .do_config = i_APCI3120_InsnConfigDigitalOutput,
- .do_write = i_APCI3120_InsnWriteDigitalOutput,
- .do_bits = i_APCI3120_InsnBitsDigitalOutput,
- .timer_config = i_APCI3120_InsnConfigTimer,
- .timer_write = i_APCI3120_InsnWriteTimer,
- .timer_read = i_APCI3120_InsnReadTimer,
- },
-#endif
-#ifdef CONFIG_APCI_1032
- {
- .pc_DriverName = "apci1032",
- .i_VendorId = APCI1032_BOARD_VENDOR_ID,
- .i_DeviceId = 0x1003,
- .i_IorangeBase0 = 4,
- .i_IorangeBase1 = APCI1032_ADDRESS_RANGE,
- .i_PCIEeprom = ADDIDATA_EEPROM,
- .pc_EepromChip = ADDIDATA_93C76,
- .i_NbrDiChannel = 32,
- .interrupt = v_APCI1032_Interrupt,
- .reset = i_APCI1032_Reset,
- .di_config = i_APCI1032_ConfigDigitalInput,
- .di_read = i_APCI1032_Read1DigitalInput,
- .di_bits = i_APCI1032_ReadMoreDigitalInput,
- },
-#endif
-#ifdef CONFIG_APCI_1516
- {
- .pc_DriverName = "apci1516",
- .i_VendorId = APCI1516_BOARD_VENDOR_ID,
- .i_DeviceId = 0x1001,
- .i_IorangeBase0 = 128,
- .i_IorangeBase1 = APCI1516_ADDRESS_RANGE,
- .i_IorangeBase2 = 32,
- .i_PCIEeprom = ADDIDATA_EEPROM,
- .pc_EepromChip = ADDIDATA_S5920,
- .i_NbrDiChannel = 8,
- .i_NbrDoChannel = 8,
- .i_Timer = 1,
- .reset = i_APCI1516_Reset,
- .di_read = i_APCI1516_Read1DigitalInput,
- .di_bits = i_APCI1516_ReadMoreDigitalInput,
- .do_config = i_APCI1516_ConfigDigitalOutput,
- .do_write = i_APCI1516_WriteDigitalOutput,
- .do_bits = i_APCI1516_ReadDigitalOutput,
- .timer_config = i_APCI1516_ConfigWatchdog,
- .timer_write = i_APCI1516_StartStopWriteWatchdog,
- .timer_read = i_APCI1516_ReadWatchdog,
- },
-#endif
-#ifdef CONFIG_APCI_2016
- {
- .pc_DriverName = "apci2016",
- .i_VendorId = APCI2016_BOARD_VENDOR_ID,
- .i_DeviceId = 0x1002,
- .i_IorangeBase0 = 128,
- .i_IorangeBase1 = APCI2016_ADDRESS_RANGE,
- .i_IorangeBase2 = 32,
- .i_PCIEeprom = ADDIDATA_EEPROM,
- .pc_EepromChip = ADDIDATA_S5920,
- .i_NbrDoChannel = 16,
- .i_Timer = 1,
- .reset = i_APCI2016_Reset,
- .do_config = i_APCI2016_ConfigDigitalOutput,
- .do_write = i_APCI2016_WriteDigitalOutput,
- .do_bits = i_APCI2016_BitsDigitalOutput,
- .timer_config = i_APCI2016_ConfigWatchdog,
- .timer_write = i_APCI2016_StartStopWriteWatchdog,
- .timer_read = i_APCI2016_ReadWatchdog,
- },
-#endif
-#ifdef CONFIG_APCI_2032
- {
- .pc_DriverName = "apci2032",
- .i_VendorId = APCI2032_BOARD_VENDOR_ID,
- .i_DeviceId = 0x1004,
- .i_IorangeBase0 = 4,
- .i_IorangeBase1 = APCI2032_ADDRESS_RANGE,
- .i_PCIEeprom = ADDIDATA_EEPROM,
- .pc_EepromChip = ADDIDATA_93C76,
- .i_NbrDoChannel = 32,
- .i_DoMaxdata = 0xffffffff,
- .i_Timer = 1,
- .interrupt = v_APCI2032_Interrupt,
- .reset = i_APCI2032_Reset,
- .do_config = i_APCI2032_ConfigDigitalOutput,
- .do_write = i_APCI2032_WriteDigitalOutput,
- .do_bits = i_APCI2032_ReadDigitalOutput,
- .do_read = i_APCI2032_ReadInterruptStatus,
- .timer_config = i_APCI2032_ConfigWatchdog,
- .timer_write = i_APCI2032_StartStopWriteWatchdog,
- .timer_read = i_APCI2032_ReadWatchdog,
- },
-#endif
-#ifdef CONFIG_APCI_2200
- {
- .pc_DriverName = "apci2200",
- .i_VendorId = APCI2200_BOARD_VENDOR_ID,
- .i_DeviceId = 0x1005,
- .i_IorangeBase0 = 4,
- .i_IorangeBase1 = APCI2200_ADDRESS_RANGE,
- .i_PCIEeprom = ADDIDATA_EEPROM,
- .pc_EepromChip = ADDIDATA_93C76,
- .i_NbrDiChannel = 8,
- .i_NbrDoChannel = 16,
- .i_Timer = 1,
- .reset = i_APCI2200_Reset,
- .di_read = i_APCI2200_Read1DigitalInput,
- .di_bits = i_APCI2200_ReadMoreDigitalInput,
- .do_config = i_APCI2200_ConfigDigitalOutput,
- .do_write = i_APCI2200_WriteDigitalOutput,
- .do_bits = i_APCI2200_ReadDigitalOutput,
- .timer_config = i_APCI2200_ConfigWatchdog,
- .timer_write = i_APCI2200_StartStopWriteWatchdog,
- .timer_read = i_APCI2200_ReadWatchdog,
- },
-#endif
-#ifdef CONFIG_APCI_1564
- {
- .pc_DriverName = "apci1564",
- .i_VendorId = APCI1564_BOARD_VENDOR_ID,
- .i_DeviceId = 0x1006,
- .i_IorangeBase0 = 128,
- .i_IorangeBase1 = APCI1564_ADDRESS_RANGE,
- .i_PCIEeprom = ADDIDATA_EEPROM,
- .pc_EepromChip = ADDIDATA_93C76,
- .i_NbrDiChannel = 32,
- .i_NbrDoChannel = 32,
- .i_DoMaxdata = 0xffffffff,
- .i_Timer = 1,
- .interrupt = v_APCI1564_Interrupt,
- .reset = i_APCI1564_Reset,
- .di_config = i_APCI1564_ConfigDigitalInput,
- .di_read = i_APCI1564_Read1DigitalInput,
- .di_bits = i_APCI1564_ReadMoreDigitalInput,
- .do_config = i_APCI1564_ConfigDigitalOutput,
- .do_write = i_APCI1564_WriteDigitalOutput,
- .do_bits = i_APCI1564_ReadDigitalOutput,
- .do_read = i_APCI1564_ReadInterruptStatus,
- .timer_config = i_APCI1564_ConfigTimerCounterWatchdog,
- .timer_write = i_APCI1564_StartStopWriteTimerCounterWatchdog,
- .timer_read = i_APCI1564_ReadTimerCounterWatchdog,
- },
-#endif
-#ifdef CONFIG_APCI_1500
- {
- .pc_DriverName = "apci1500",
- .i_VendorId = APCI1500_BOARD_VENDOR_ID,
- .i_DeviceId = 0x80fc,
- .i_IorangeBase0 = 128,
- .i_IorangeBase1 = APCI1500_ADDRESS_RANGE,
- .i_IorangeBase2 = 4,
- .i_PCIEeprom = ADDIDATA_NO_EEPROM,
- .i_NbrDiChannel = 16,
- .i_NbrDoChannel = 16,
- .i_DoMaxdata = 0xffff,
- .i_Timer = 1,
- .interrupt = v_APCI1500_Interrupt,
- .reset = i_APCI1500_Reset,
- .di_config = i_APCI1500_ConfigDigitalInputEvent,
- .di_read = i_APCI1500_Initialisation,
- .di_write = i_APCI1500_StartStopInputEvent,
- .di_bits = i_APCI1500_ReadMoreDigitalInput,
- .do_config = i_APCI1500_ConfigDigitalOutputErrorInterrupt,
- .do_write = i_APCI1500_WriteDigitalOutput,
- .do_bits = i_APCI1500_ConfigureInterrupt,
- .timer_config = i_APCI1500_ConfigCounterTimerWatchdog,
- .timer_write = i_APCI1500_StartStopTriggerTimerCounterWatchdog,
- .timer_read = i_APCI1500_ReadInterruptMask,
- .timer_bits = i_APCI1500_ReadCounterTimerWatchdog,
- },
-#endif
-#ifdef CONFIG_APCI_3001
- {
- .pc_DriverName = "apci3001",
- .i_VendorId = APCI3120_BOARD_VENDOR_ID,
- .i_DeviceId = 0x828D,
- .i_IorangeBase0 = AMCC_OP_REG_SIZE,
- .i_IorangeBase1 = APCI3120_ADDRESS_RANGE,
- .i_IorangeBase2 = 8,
- .i_PCIEeprom = ADDIDATA_NO_EEPROM,
- .i_NbrAiChannel = 16,
- .i_NbrAiChannelDiff = 8,
- .i_AiChannelList = 16,
- .i_AiMaxdata = 0xfff,
- .pr_AiRangelist = &range_apci3120_ai,
- .i_NbrDiChannel = 4,
- .i_NbrDoChannel = 4,
- .i_DoMaxdata = 0x0f,
- .i_Dma = 1,
- .i_Timer = 1,
- .b_AvailableConvertUnit = 1,
- .ui_MinAcquisitiontimeNs = 10000,
- .ui_MinDelaytimeNs = 100000,
- .interrupt = v_APCI3120_Interrupt,
- .reset = i_APCI3120_Reset,
- .ai_config = i_APCI3120_InsnConfigAnalogInput,
- .ai_read = i_APCI3120_InsnReadAnalogInput,
- .ai_cmdtest = i_APCI3120_CommandTestAnalogInput,
- .ai_cmd = i_APCI3120_CommandAnalogInput,
- .ai_cancel = i_APCI3120_StopCyclicAcquisition,
- .di_read = i_APCI3120_InsnReadDigitalInput,
- .di_bits = i_APCI3120_InsnBitsDigitalInput,
- .do_config = i_APCI3120_InsnConfigDigitalOutput,
- .do_write = i_APCI3120_InsnWriteDigitalOutput,
- .do_bits = i_APCI3120_InsnBitsDigitalOutput,
- .timer_config = i_APCI3120_InsnConfigTimer,
- .timer_write = i_APCI3120_InsnWriteTimer,
- .timer_read = i_APCI3120_InsnReadTimer,
- },
-#endif
-#ifdef CONFIG_APCI_3501
- {
- .pc_DriverName = "apci3501",
- .i_VendorId = APCI3501_BOARD_VENDOR_ID,
- .i_DeviceId = 0x3001,
- .i_IorangeBase0 = 64,
- .i_IorangeBase1 = APCI3501_ADDRESS_RANGE,
- .i_PCIEeprom = ADDIDATA_EEPROM,
- .pc_EepromChip = ADDIDATA_S5933,
- .i_AoMaxdata = 16383,
- .pr_AoRangelist = &range_apci3501_ao,
- .i_NbrDiChannel = 2,
- .i_NbrDoChannel = 2,
- .i_DoMaxdata = 0x3,
- .i_Timer = 1,
- .interrupt = v_APCI3501_Interrupt,
- .reset = i_APCI3501_Reset,
- .ao_config = i_APCI3501_ConfigAnalogOutput,
- .ao_write = i_APCI3501_WriteAnalogOutput,
- .di_bits = i_APCI3501_ReadDigitalInput,
- .do_config = i_APCI3501_ConfigDigitalOutput,
- .do_write = i_APCI3501_WriteDigitalOutput,
- .do_bits = i_APCI3501_ReadDigitalOutput,
- .timer_config = i_APCI3501_ConfigTimerCounterWatchdog,
- .timer_write = i_APCI3501_StartStopWriteTimerCounterWatchdog,
- .timer_read = i_APCI3501_ReadTimerCounterWatchdog,
- },
-#endif
-#ifdef CONFIG_APCI_035
- {
- .pc_DriverName = "apci035",
- .i_VendorId = APCI035_BOARD_VENDOR_ID,
- .i_DeviceId = 0x0300,
- .i_IorangeBase0 = 127,
- .i_IorangeBase1 = APCI035_ADDRESS_RANGE,
- .i_PCIEeprom = 1,
- .pc_EepromChip = ADDIDATA_S5920,
- .i_NbrAiChannel = 16,
- .i_NbrAiChannelDiff = 8,
- .i_AiChannelList = 16,
- .i_AiMaxdata = 0xff,
- .pr_AiRangelist = &range_apci035_ai,
- .i_Timer = 1,
- .ui_MinAcquisitiontimeNs = 10000,
- .ui_MinDelaytimeNs = 100000,
- .interrupt = v_APCI035_Interrupt,
- .reset = i_APCI035_Reset,
- .ai_config = i_APCI035_ConfigAnalogInput,
- .ai_read = i_APCI035_ReadAnalogInput,
- .timer_config = i_APCI035_ConfigTimerWatchdog,
- .timer_write = i_APCI035_StartStopWriteTimerWatchdog,
- .timer_read = i_APCI035_ReadTimerWatchdog,
- },
-#endif
-#ifdef CONFIG_APCI_3200
- {
- .pc_DriverName = "apci3200",
- .i_VendorId = APCI3200_BOARD_VENDOR_ID,
- .i_DeviceId = 0x3000,
- .i_IorangeBase0 = 128,
- .i_IorangeBase1 = 256,
- .i_IorangeBase2 = 4,
- .i_IorangeBase3 = 4,
- .i_PCIEeprom = ADDIDATA_EEPROM,
- .pc_EepromChip = ADDIDATA_S5920,
- .i_NbrAiChannel = 16,
- .i_NbrAiChannelDiff = 8,
- .i_AiChannelList = 16,
- .i_AiMaxdata = 0x3ffff,
- .pr_AiRangelist = &range_apci3200_ai,
- .i_NbrDiChannel = 4,
- .i_NbrDoChannel = 4,
- .ui_MinAcquisitiontimeNs = 10000,
- .ui_MinDelaytimeNs = 100000,
- .interrupt = v_APCI3200_Interrupt,
- .reset = i_APCI3200_Reset,
- .ai_config = i_APCI3200_ConfigAnalogInput,
- .ai_read = i_APCI3200_ReadAnalogInput,
- .ai_write = i_APCI3200_InsnWriteReleaseAnalogInput,
- .ai_bits = i_APCI3200_InsnBits_AnalogInput_Test,
- .ai_cmdtest = i_APCI3200_CommandTestAnalogInput,
- .ai_cmd = i_APCI3200_CommandAnalogInput,
- .ai_cancel = i_APCI3200_StopCyclicAcquisition,
- .di_bits = i_APCI3200_ReadDigitalInput,
- .do_config = i_APCI3200_ConfigDigitalOutput,
- .do_write = i_APCI3200_WriteDigitalOutput,
- .do_bits = i_APCI3200_ReadDigitalOutput,
- },
-#endif
-#ifdef CONFIG_APCI_3300
- /* Begin JK .20.10.2004 = APCI-3300 integration */
- {
- .pc_DriverName = "apci3300",
- .i_VendorId = APCI3200_BOARD_VENDOR_ID,
- .i_DeviceId = 0x3007,
- .i_IorangeBase0 = 128,
- .i_IorangeBase1 = 256,
- .i_IorangeBase2 = 4,
- .i_IorangeBase3 = 4,
- .i_PCIEeprom = ADDIDATA_EEPROM,
- .pc_EepromChip = ADDIDATA_S5920,
- .i_NbrAiChannelDiff = 8,
- .i_AiChannelList = 8,
- .i_AiMaxdata = 0x3ffff,
- .pr_AiRangelist = &range_apci3300_ai,
- .i_NbrDiChannel = 4,
- .i_NbrDoChannel = 4,
- .ui_MinAcquisitiontimeNs = 10000,
- .ui_MinDelaytimeNs = 100000,
- .interrupt = v_APCI3200_Interrupt,
- .reset = i_APCI3200_Reset,
- .ai_config = i_APCI3200_ConfigAnalogInput,
- .ai_read = i_APCI3200_ReadAnalogInput,
- .ai_write = i_APCI3200_InsnWriteReleaseAnalogInput,
- .ai_bits = i_APCI3200_InsnBits_AnalogInput_Test,
- .ai_cmdtest = i_APCI3200_CommandTestAnalogInput,
- .ai_cmd = i_APCI3200_CommandAnalogInput,
- .ai_cancel = i_APCI3200_StopCyclicAcquisition,
- .di_bits = i_APCI3200_ReadDigitalInput,
- .do_config = i_APCI3200_ConfigDigitalOutput,
- .do_write = i_APCI3200_WriteDigitalOutput,
- .do_bits = i_APCI3200_ReadDigitalOutput,
- },
-#endif
-#ifdef CONFIG_APCI_1710
- {
- .pc_DriverName = "apci1710",
- .i_VendorId = APCI1710_BOARD_VENDOR_ID,
- .i_DeviceId = APCI1710_BOARD_DEVICE_ID,
- .i_IorangeBase0 = 128,
- .i_IorangeBase1 = 8,
- .i_IorangeBase2 = 256,
- .i_PCIEeprom = ADDIDATA_NO_EEPROM,
- .interrupt = v_APCI1710_Interrupt,
- .reset = i_APCI1710_Reset,
- },
-#endif
-#ifdef CONFIG_APCI_16XX
- {
- .pc_DriverName = "apci1648",
- .i_VendorId = PCI_VENDOR_ID_ADDIDATA,
- .i_DeviceId = 0x1009,
- .i_IorangeBase0 = 128,
- .i_PCIEeprom = ADDIDATA_NO_EEPROM,
- .i_NbrTTLChannel = 48,
- .reset = i_APCI16XX_Reset,
- .ttl_config = i_APCI16XX_InsnConfigInitTTLIO,
- .ttl_bits = i_APCI16XX_InsnBitsReadTTLIO,
- .ttl_read = i_APCI16XX_InsnReadTTLIOAllPortValue,
- .ttl_write = i_APCI16XX_InsnBitsWriteTTLIO,
- }, {
- .pc_DriverName = "apci1696",
- .i_VendorId = PCI_VENDOR_ID_ADDIDATA,
- .i_DeviceId = 0x100A,
- .i_IorangeBase0 = 128,
- .i_PCIEeprom = ADDIDATA_NO_EEPROM,
- .i_NbrTTLChannel = 96,
- .reset = i_APCI16XX_Reset,
- .ttl_config = i_APCI16XX_InsnConfigInitTTLIO,
- .ttl_bits = i_APCI16XX_InsnBitsReadTTLIO,
- .ttl_read = i_APCI16XX_InsnReadTTLIOAllPortValue,
- .ttl_write = i_APCI16XX_InsnBitsWriteTTLIO,
- },
-#endif
-#ifdef CONFIG_APCI_3XXX
- {
- .pc_DriverName = "apci3000-16",
- .i_VendorId = PCI_VENDOR_ID_ADDIDATA,
- .i_DeviceId = 0x3010,
- .i_IorangeBase0 = 256,
- .i_IorangeBase1 = 256,
- .i_IorangeBase2 = 256,
- .i_IorangeBase3 = 256,
- .i_PCIEeprom = ADDIDATA_NO_EEPROM,
- .pc_EepromChip = ADDIDATA_9054,
- .i_NbrAiChannel = 16,
- .i_NbrAiChannelDiff = 8,
- .i_AiChannelList = 16,
- .i_AiMaxdata = 4095,
- .pr_AiRangelist = &range_apci3XXX_ai,
- .i_NbrTTLChannel = 24,
- .b_AvailableConvertUnit = 6,
- .ui_MinAcquisitiontimeNs = 10000,
- .interrupt = v_APCI3XXX_Interrupt,
- .reset = i_APCI3XXX_Reset,
- .ai_config = i_APCI3XXX_InsnConfigAnalogInput,
- .ai_read = i_APCI3XXX_InsnReadAnalogInput,
- .ttl_config = i_APCI3XXX_InsnConfigInitTTLIO,
- .ttl_bits = i_APCI3XXX_InsnBitsTTLIO,
- .ttl_read = i_APCI3XXX_InsnReadTTLIO,
- .ttl_write = i_APCI3XXX_InsnWriteTTLIO,
- }, {
- .pc_DriverName = "apci3000-8",
- .i_VendorId = PCI_VENDOR_ID_ADDIDATA,
- .i_DeviceId = 0x300F,
- .i_IorangeBase0 = 256,
- .i_IorangeBase1 = 256,
- .i_IorangeBase2 = 256,
- .i_IorangeBase3 = 256,
- .i_PCIEeprom = ADDIDATA_NO_EEPROM,
- .pc_EepromChip = ADDIDATA_9054,
- .i_NbrAiChannel = 8,
- .i_NbrAiChannelDiff = 4,
- .i_AiChannelList = 8,
- .i_AiMaxdata = 4095,
- .pr_AiRangelist = &range_apci3XXX_ai,
- .i_NbrTTLChannel = 24,
- .b_AvailableConvertUnit = 6,
- .ui_MinAcquisitiontimeNs = 10000,
- .interrupt = v_APCI3XXX_Interrupt,
- .reset = i_APCI3XXX_Reset,
- .ai_config = i_APCI3XXX_InsnConfigAnalogInput,
- .ai_read = i_APCI3XXX_InsnReadAnalogInput,
- .ttl_config = i_APCI3XXX_InsnConfigInitTTLIO,
- .ttl_bits = i_APCI3XXX_InsnBitsTTLIO,
- .ttl_read = i_APCI3XXX_InsnReadTTLIO,
- .ttl_write = i_APCI3XXX_InsnWriteTTLIO,
- }, {
- .pc_DriverName = "apci3000-4",
- .i_VendorId = PCI_VENDOR_ID_ADDIDATA,
- .i_DeviceId = 0x300E,
- .i_IorangeBase0 = 256,
- .i_IorangeBase1 = 256,
- .i_IorangeBase2 = 256,
- .i_IorangeBase3 = 256,
- .i_PCIEeprom = ADDIDATA_NO_EEPROM,
- .pc_EepromChip = ADDIDATA_9054,
- .i_NbrAiChannel = 4,
- .i_NbrAiChannelDiff = 2,
- .i_AiChannelList = 4,
- .i_AiMaxdata = 4095,
- .pr_AiRangelist = &range_apci3XXX_ai,
- .i_NbrTTLChannel = 24,
- .b_AvailableConvertUnit = 6,
- .ui_MinAcquisitiontimeNs = 10000,
- .interrupt = v_APCI3XXX_Interrupt,
- .reset = i_APCI3XXX_Reset,
- .ai_config = i_APCI3XXX_InsnConfigAnalogInput,
- .ai_read = i_APCI3XXX_InsnReadAnalogInput,
- .ttl_config = i_APCI3XXX_InsnConfigInitTTLIO,
- .ttl_bits = i_APCI3XXX_InsnBitsTTLIO,
- .ttl_read = i_APCI3XXX_InsnReadTTLIO,
- .ttl_write = i_APCI3XXX_InsnWriteTTLIO,
- }, {
- .pc_DriverName = "apci3006-16",
- .i_VendorId = PCI_VENDOR_ID_ADDIDATA,
- .i_DeviceId = 0x3013,
- .i_IorangeBase0 = 256,
- .i_IorangeBase1 = 256,
- .i_IorangeBase2 = 256,
- .i_IorangeBase3 = 256,
- .i_PCIEeprom = ADDIDATA_NO_EEPROM,
- .pc_EepromChip = ADDIDATA_9054,
- .i_NbrAiChannel = 16,
- .i_NbrAiChannelDiff = 8,
- .i_AiChannelList = 16,
- .i_AiMaxdata = 65535,
- .pr_AiRangelist = &range_apci3XXX_ai,
- .i_NbrTTLChannel = 24,
- .b_AvailableConvertUnit = 6,
- .ui_MinAcquisitiontimeNs = 10000,
- .interrupt = v_APCI3XXX_Interrupt,
- .reset = i_APCI3XXX_Reset,
- .ai_config = i_APCI3XXX_InsnConfigAnalogInput,
- .ai_read = i_APCI3XXX_InsnReadAnalogInput,
- .ttl_config = i_APCI3XXX_InsnConfigInitTTLIO,
- .ttl_bits = i_APCI3XXX_InsnBitsTTLIO,
- .ttl_read = i_APCI3XXX_InsnReadTTLIO,
- .ttl_write = i_APCI3XXX_InsnWriteTTLIO,
- }, {
- .pc_DriverName = "apci3006-8",
- .i_VendorId = PCI_VENDOR_ID_ADDIDATA,
- .i_DeviceId = 0x3014,
- .i_IorangeBase0 = 256,
- .i_IorangeBase1 = 256,
- .i_IorangeBase2 = 256,
- .i_IorangeBase3 = 256,
- .i_PCIEeprom = ADDIDATA_NO_EEPROM,
- .pc_EepromChip = ADDIDATA_9054,
- .i_NbrAiChannel = 8,
- .i_NbrAiChannelDiff = 4,
- .i_AiChannelList = 8,
- .i_AiMaxdata = 65535,
- .pr_AiRangelist = &range_apci3XXX_ai,
- .i_NbrTTLChannel = 24,
- .b_AvailableConvertUnit = 6,
- .ui_MinAcquisitiontimeNs = 10000,
- .interrupt = v_APCI3XXX_Interrupt,
- .reset = i_APCI3XXX_Reset,
- .ai_config = i_APCI3XXX_InsnConfigAnalogInput,
- .ai_read = i_APCI3XXX_InsnReadAnalogInput,
- .ttl_config = i_APCI3XXX_InsnConfigInitTTLIO,
- .ttl_bits = i_APCI3XXX_InsnBitsTTLIO,
- .ttl_read = i_APCI3XXX_InsnReadTTLIO,
- .ttl_write = i_APCI3XXX_InsnWriteTTLIO,
- }, {
- .pc_DriverName = "apci3006-4",
- .i_VendorId = PCI_VENDOR_ID_ADDIDATA,
- .i_DeviceId = 0x3015,
- .i_IorangeBase0 = 256,
- .i_IorangeBase1 = 256,
- .i_IorangeBase2 = 256,
- .i_IorangeBase3 = 256,
- .i_PCIEeprom = ADDIDATA_NO_EEPROM,
- .pc_EepromChip = ADDIDATA_9054,
- .i_NbrAiChannel = 4,
- .i_NbrAiChannelDiff = 2,
- .i_AiChannelList = 4,
- .i_AiMaxdata = 65535,
- .pr_AiRangelist = &range_apci3XXX_ai,
- .i_NbrTTLChannel = 24,
- .b_AvailableConvertUnit = 6,
- .ui_MinAcquisitiontimeNs = 10000,
- .interrupt = v_APCI3XXX_Interrupt,
- .reset = i_APCI3XXX_Reset,
- .ai_config = i_APCI3XXX_InsnConfigAnalogInput,
- .ai_read = i_APCI3XXX_InsnReadAnalogInput,
- .ttl_config = i_APCI3XXX_InsnConfigInitTTLIO,
- .ttl_bits = i_APCI3XXX_InsnBitsTTLIO,
- .ttl_read = i_APCI3XXX_InsnReadTTLIO,
- .ttl_write = i_APCI3XXX_InsnWriteTTLIO,
- }, {
- .pc_DriverName = "apci3010-16",
- .i_VendorId = PCI_VENDOR_ID_ADDIDATA,
- .i_DeviceId = 0x3016,
- .i_IorangeBase0 = 256,
- .i_IorangeBase1 = 256,
- .i_IorangeBase2 = 256,
- .i_IorangeBase3 = 256,
- .i_PCIEeprom = ADDIDATA_NO_EEPROM,
- .pc_EepromChip = ADDIDATA_9054,
- .i_NbrAiChannel = 16,
- .i_NbrAiChannelDiff = 8,
- .i_AiChannelList = 16,
- .i_AiMaxdata = 4095,
- .pr_AiRangelist = &range_apci3XXX_ai,
- .i_NbrDiChannel = 4,
- .i_NbrDoChannel = 4,
- .i_DoMaxdata = 1,
- .i_NbrTTLChannel = 24,
- .b_AvailableConvertUnit = 6,
- .ui_MinAcquisitiontimeNs = 5000,
- .interrupt = v_APCI3XXX_Interrupt,
- .reset = i_APCI3XXX_Reset,
- .ai_config = i_APCI3XXX_InsnConfigAnalogInput,
- .ai_read = i_APCI3XXX_InsnReadAnalogInput,
- .di_read = i_APCI3XXX_InsnReadDigitalInput,
- .di_bits = i_APCI3XXX_InsnBitsDigitalInput,
- .do_write = i_APCI3XXX_InsnWriteDigitalOutput,
- .do_bits = i_APCI3XXX_InsnBitsDigitalOutput,
- .do_read = i_APCI3XXX_InsnReadDigitalOutput,
- .ttl_config = i_APCI3XXX_InsnConfigInitTTLIO,
- .ttl_bits = i_APCI3XXX_InsnBitsTTLIO,
- .ttl_read = i_APCI3XXX_InsnReadTTLIO,
- .ttl_write = i_APCI3XXX_InsnWriteTTLIO,
- }, {
- .pc_DriverName = "apci3010-8",
- .i_VendorId = PCI_VENDOR_ID_ADDIDATA,
- .i_DeviceId = 0x3017,
- .i_IorangeBase0 = 256,
- .i_IorangeBase1 = 256,
- .i_IorangeBase2 = 256,
- .i_IorangeBase3 = 256,
- .i_PCIEeprom = ADDIDATA_NO_EEPROM,
- .pc_EepromChip = ADDIDATA_9054,
- .i_NbrAiChannel = 8,
- .i_NbrAiChannelDiff = 4,
- .i_AiChannelList = 8,
- .i_AiMaxdata = 4095,
- .pr_AiRangelist = &range_apci3XXX_ai,
- .i_NbrDiChannel = 4,
- .i_NbrDoChannel = 4,
- .i_DoMaxdata = 1,
- .i_NbrTTLChannel = 24,
- .b_AvailableConvertUnit = 6,
- .ui_MinAcquisitiontimeNs = 5000,
- .interrupt = v_APCI3XXX_Interrupt,
- .reset = i_APCI3XXX_Reset,
- .ai_config = i_APCI3XXX_InsnConfigAnalogInput,
- .ai_read = i_APCI3XXX_InsnReadAnalogInput,
- .di_read = i_APCI3XXX_InsnReadDigitalInput,
- .di_bits = i_APCI3XXX_InsnBitsDigitalInput,
- .do_write = i_APCI3XXX_InsnWriteDigitalOutput,
- .do_bits = i_APCI3XXX_InsnBitsDigitalOutput,
- .do_read = i_APCI3XXX_InsnReadDigitalOutput,
- .ttl_config = i_APCI3XXX_InsnConfigInitTTLIO,
- .ttl_bits = i_APCI3XXX_InsnBitsTTLIO,
- .ttl_read = i_APCI3XXX_InsnReadTTLIO,
- .ttl_write = i_APCI3XXX_InsnWriteTTLIO,
- }, {
- .pc_DriverName = "apci3010-4",
- .i_VendorId = PCI_VENDOR_ID_ADDIDATA,
- .i_DeviceId = 0x3018,
- .i_IorangeBase0 = 256,
- .i_IorangeBase1 = 256,
- .i_IorangeBase2 = 256,
- .i_IorangeBase3 = 256,
- .i_PCIEeprom = ADDIDATA_NO_EEPROM,
- .pc_EepromChip = ADDIDATA_9054,
- .i_NbrAiChannel = 4,
- .i_NbrAiChannelDiff = 2,
- .i_AiChannelList = 4,
- .i_AiMaxdata = 4095,
- .pr_AiRangelist = &range_apci3XXX_ai,
- .i_NbrDiChannel = 4,
- .i_NbrDoChannel = 4,
- .i_DoMaxdata = 1,
- .i_NbrTTLChannel = 24,
- .b_AvailableConvertUnit = 6,
- .ui_MinAcquisitiontimeNs = 5000,
- .interrupt = v_APCI3XXX_Interrupt,
- .reset = i_APCI3XXX_Reset,
- .ai_config = i_APCI3XXX_InsnConfigAnalogInput,
- .ai_read = i_APCI3XXX_InsnReadAnalogInput,
- .di_read = i_APCI3XXX_InsnReadDigitalInput,
- .di_bits = i_APCI3XXX_InsnBitsDigitalInput,
- .do_write = i_APCI3XXX_InsnWriteDigitalOutput,
- .do_bits = i_APCI3XXX_InsnBitsDigitalOutput,
- .do_read = i_APCI3XXX_InsnReadDigitalOutput,
- .ttl_config = i_APCI3XXX_InsnConfigInitTTLIO,
- .ttl_bits = i_APCI3XXX_InsnBitsTTLIO,
- .ttl_read = i_APCI3XXX_InsnReadTTLIO,
- .ttl_write = i_APCI3XXX_InsnWriteTTLIO,
- }, {
- .pc_DriverName = "apci3016-16",
- .i_VendorId = PCI_VENDOR_ID_ADDIDATA,
- .i_DeviceId = 0x3019,
- .i_IorangeBase0 = 256,
- .i_IorangeBase1 = 256,
- .i_IorangeBase2 = 256,
- .i_IorangeBase3 = 256,
- .i_PCIEeprom = ADDIDATA_NO_EEPROM,
- .pc_EepromChip = ADDIDATA_9054,
- .i_NbrAiChannel = 16,
- .i_NbrAiChannelDiff = 8,
- .i_AiChannelList = 16,
- .i_AiMaxdata = 65535,
- .pr_AiRangelist = &range_apci3XXX_ai,
- .i_NbrDiChannel = 4,
- .i_NbrDoChannel = 4,
- .i_DoMaxdata = 1,
- .i_NbrTTLChannel = 24,
- .b_AvailableConvertUnit = 6,
- .ui_MinAcquisitiontimeNs = 5000,
- .interrupt = v_APCI3XXX_Interrupt,
- .reset = i_APCI3XXX_Reset,
- .ai_config = i_APCI3XXX_InsnConfigAnalogInput,
- .ai_read = i_APCI3XXX_InsnReadAnalogInput,
- .di_read = i_APCI3XXX_InsnReadDigitalInput,
- .di_bits = i_APCI3XXX_InsnBitsDigitalInput,
- .do_write = i_APCI3XXX_InsnWriteDigitalOutput,
- .do_bits = i_APCI3XXX_InsnBitsDigitalOutput,
- .do_read = i_APCI3XXX_InsnReadDigitalOutput,
- .ttl_config = i_APCI3XXX_InsnConfigInitTTLIO,
- .ttl_bits = i_APCI3XXX_InsnBitsTTLIO,
- .ttl_read = i_APCI3XXX_InsnReadTTLIO,
- .ttl_write = i_APCI3XXX_InsnWriteTTLIO,
- }, {
- .pc_DriverName = "apci3016-8",
- .i_VendorId = PCI_VENDOR_ID_ADDIDATA,
- .i_DeviceId = 0x301A,
- .i_IorangeBase0 = 256,
- .i_IorangeBase1 = 256,
- .i_IorangeBase2 = 256,
- .i_IorangeBase3 = 256,
- .i_PCIEeprom = ADDIDATA_NO_EEPROM,
- .pc_EepromChip = ADDIDATA_9054,
- .i_NbrAiChannel = 8,
- .i_NbrAiChannelDiff = 4,
- .i_AiChannelList = 8,
- .i_AiMaxdata = 65535,
- .pr_AiRangelist = &range_apci3XXX_ai,
- .i_NbrDiChannel = 4,
- .i_NbrDoChannel = 4,
- .i_DoMaxdata = 1,
- .i_NbrTTLChannel = 24,
- .b_AvailableConvertUnit = 6,
- .ui_MinAcquisitiontimeNs = 5000,
- .interrupt = v_APCI3XXX_Interrupt,
- .reset = i_APCI3XXX_Reset,
- .ai_config = i_APCI3XXX_InsnConfigAnalogInput,
- .ai_read = i_APCI3XXX_InsnReadAnalogInput,
- .di_read = i_APCI3XXX_InsnReadDigitalInput,
- .di_bits = i_APCI3XXX_InsnBitsDigitalInput,
- .do_write = i_APCI3XXX_InsnWriteDigitalOutput,
- .do_bits = i_APCI3XXX_InsnBitsDigitalOutput,
- .do_read = i_APCI3XXX_InsnReadDigitalOutput,
- .ttl_config = i_APCI3XXX_InsnConfigInitTTLIO,
- .ttl_bits = i_APCI3XXX_InsnBitsTTLIO,
- .ttl_read = i_APCI3XXX_InsnReadTTLIO,
- .ttl_write = i_APCI3XXX_InsnWriteTTLIO,
- }, {
- .pc_DriverName = "apci3016-4",
- .i_VendorId = PCI_VENDOR_ID_ADDIDATA,
- .i_DeviceId = 0x301B,
- .i_IorangeBase0 = 256,
- .i_IorangeBase1 = 256,
- .i_IorangeBase2 = 256,
- .i_IorangeBase3 = 256,
- .i_PCIEeprom = ADDIDATA_NO_EEPROM,
- .pc_EepromChip = ADDIDATA_9054,
- .i_NbrAiChannel = 4,
- .i_NbrAiChannelDiff = 2,
- .i_AiChannelList = 4,
- .i_AiMaxdata = 65535,
- .pr_AiRangelist = &range_apci3XXX_ai,
- .i_NbrDiChannel = 4,
- .i_NbrDoChannel = 4,
- .i_DoMaxdata = 1,
- .i_NbrTTLChannel = 24,
- .b_AvailableConvertUnit = 6,
- .ui_MinAcquisitiontimeNs = 5000,
- .interrupt = v_APCI3XXX_Interrupt,
- .reset = i_APCI3XXX_Reset,
- .ai_config = i_APCI3XXX_InsnConfigAnalogInput,
- .ai_read = i_APCI3XXX_InsnReadAnalogInput,
- .di_read = i_APCI3XXX_InsnReadDigitalInput,
- .di_bits = i_APCI3XXX_InsnBitsDigitalInput,
- .do_write = i_APCI3XXX_InsnWriteDigitalOutput,
- .do_bits = i_APCI3XXX_InsnBitsDigitalOutput,
- .do_read = i_APCI3XXX_InsnReadDigitalOutput,
- .ttl_config = i_APCI3XXX_InsnConfigInitTTLIO,
- .ttl_bits = i_APCI3XXX_InsnBitsTTLIO,
- .ttl_read = i_APCI3XXX_InsnReadTTLIO,
- .ttl_write = i_APCI3XXX_InsnWriteTTLIO,
- }, {
- .pc_DriverName = "apci3100-16-4",
- .i_VendorId = PCI_VENDOR_ID_ADDIDATA,
- .i_DeviceId = 0x301C,
- .i_IorangeBase0 = 256,
- .i_IorangeBase1 = 256,
- .i_IorangeBase2 = 256,
- .i_IorangeBase3 = 256,
- .i_PCIEeprom = ADDIDATA_NO_EEPROM,
- .pc_EepromChip = ADDIDATA_9054,
- .i_NbrAiChannel = 16,
- .i_NbrAiChannelDiff = 8,
- .i_AiChannelList = 16,
- .i_NbrAoChannel = 4,
- .i_AiMaxdata = 4095,
- .i_AoMaxdata = 4095,
- .pr_AiRangelist = &range_apci3XXX_ai,
- .pr_AoRangelist = &range_apci3XXX_ao,
- .i_NbrTTLChannel = 24,
- .b_AvailableConvertUnit = 6,
- .ui_MinAcquisitiontimeNs = 10000,
- .interrupt = v_APCI3XXX_Interrupt,
- .reset = i_APCI3XXX_Reset,
- .ai_config = i_APCI3XXX_InsnConfigAnalogInput,
- .ai_read = i_APCI3XXX_InsnReadAnalogInput,
- .ao_write = i_APCI3XXX_InsnWriteAnalogOutput,
- .ttl_config = i_APCI3XXX_InsnConfigInitTTLIO,
- .ttl_bits = i_APCI3XXX_InsnBitsTTLIO,
- .ttl_read = i_APCI3XXX_InsnReadTTLIO,
- .ttl_write = i_APCI3XXX_InsnWriteTTLIO,
- }, {
- .pc_DriverName = "apci3100-8-4",
- .i_VendorId = PCI_VENDOR_ID_ADDIDATA,
- .i_DeviceId = 0x301D,
- .i_IorangeBase0 = 256,
- .i_IorangeBase1 = 256,
- .i_IorangeBase2 = 256,
- .i_IorangeBase3 = 256,
- .i_PCIEeprom = ADDIDATA_NO_EEPROM,
- .pc_EepromChip = ADDIDATA_9054,
- .i_NbrAiChannel = 8,
- .i_NbrAiChannelDiff = 4,
- .i_AiChannelList = 8,
- .i_NbrAoChannel = 4,
- .i_AiMaxdata = 4095,
- .i_AoMaxdata = 4095,
- .pr_AiRangelist = &range_apci3XXX_ai,
- .pr_AoRangelist = &range_apci3XXX_ao,
- .i_NbrTTLChannel = 24,
- .b_AvailableConvertUnit = 6,
- .ui_MinAcquisitiontimeNs = 10000,
- .interrupt = v_APCI3XXX_Interrupt,
- .reset = i_APCI3XXX_Reset,
- .ai_config = i_APCI3XXX_InsnConfigAnalogInput,
- .ai_read = i_APCI3XXX_InsnReadAnalogInput,
- .ao_write = i_APCI3XXX_InsnWriteAnalogOutput,
- .ttl_config = i_APCI3XXX_InsnConfigInitTTLIO,
- .ttl_bits = i_APCI3XXX_InsnBitsTTLIO,
- .ttl_read = i_APCI3XXX_InsnReadTTLIO,
- .ttl_write = i_APCI3XXX_InsnWriteTTLIO,
- }, {
- .pc_DriverName = "apci3106-16-4",
- .i_VendorId = PCI_VENDOR_ID_ADDIDATA,
- .i_DeviceId = 0x301E,
- .i_IorangeBase0 = 256,
- .i_IorangeBase1 = 256,
- .i_IorangeBase2 = 256,
- .i_IorangeBase3 = 256,
- .i_PCIEeprom = ADDIDATA_NO_EEPROM,
- .pc_EepromChip = ADDIDATA_9054,
- .i_NbrAiChannel = 16,
- .i_NbrAiChannelDiff = 8,
- .i_AiChannelList = 16,
- .i_NbrAoChannel = 4,
- .i_AiMaxdata = 65535,
- .i_AoMaxdata = 4095,
- .pr_AiRangelist = &range_apci3XXX_ai,
- .pr_AoRangelist = &range_apci3XXX_ao,
- .i_NbrTTLChannel = 24,
- .b_AvailableConvertUnit = 6,
- .ui_MinAcquisitiontimeNs = 10000,
- .interrupt = v_APCI3XXX_Interrupt,
- .reset = i_APCI3XXX_Reset,
- .ai_config = i_APCI3XXX_InsnConfigAnalogInput,
- .ai_read = i_APCI3XXX_InsnReadAnalogInput,
- .ao_write = i_APCI3XXX_InsnWriteAnalogOutput,
- .ttl_config = i_APCI3XXX_InsnConfigInitTTLIO,
- .ttl_bits = i_APCI3XXX_InsnBitsTTLIO,
- .ttl_read = i_APCI3XXX_InsnReadTTLIO,
- .ttl_write = i_APCI3XXX_InsnWriteTTLIO,
- }, {
- .pc_DriverName = "apci3106-8-4",
- .i_VendorId = PCI_VENDOR_ID_ADDIDATA,
- .i_DeviceId = 0x301F,
- .i_IorangeBase0 = 256,
- .i_IorangeBase1 = 256,
- .i_IorangeBase2 = 256,
- .i_IorangeBase3 = 256,
- .i_PCIEeprom = ADDIDATA_NO_EEPROM,
- .pc_EepromChip = ADDIDATA_9054,
- .i_NbrAiChannel = 8,
- .i_NbrAiChannelDiff = 4,
- .i_AiChannelList = 8,
- .i_NbrAoChannel = 4,
- .i_AiMaxdata = 65535,
- .i_AoMaxdata = 4095,
- .pr_AiRangelist = &range_apci3XXX_ai,
- .pr_AoRangelist = &range_apci3XXX_ao,
- .i_NbrTTLChannel = 24,
- .b_AvailableConvertUnit = 6,
- .ui_MinAcquisitiontimeNs = 10000,
- .interrupt = v_APCI3XXX_Interrupt,
- .reset = i_APCI3XXX_Reset,
- .ai_config = i_APCI3XXX_InsnConfigAnalogInput,
- .ai_read = i_APCI3XXX_InsnReadAnalogInput,
- .ao_write = i_APCI3XXX_InsnWriteAnalogOutput,
- .ttl_config = i_APCI3XXX_InsnConfigInitTTLIO,
- .ttl_bits = i_APCI3XXX_InsnBitsTTLIO,
- .ttl_read = i_APCI3XXX_InsnReadTTLIO,
- .ttl_write = i_APCI3XXX_InsnWriteTTLIO,
- }, {
- .pc_DriverName = "apci3110-16-4",
- .i_VendorId = PCI_VENDOR_ID_ADDIDATA,
- .i_DeviceId = 0x3020,
- .i_IorangeBase0 = 256,
- .i_IorangeBase1 = 256,
- .i_IorangeBase2 = 256,
- .i_IorangeBase3 = 256,
- .i_PCIEeprom = ADDIDATA_NO_EEPROM,
- .pc_EepromChip = ADDIDATA_9054,
- .i_NbrAiChannel = 16,
- .i_NbrAiChannelDiff = 8,
- .i_AiChannelList = 16,
- .i_NbrAoChannel = 4,
- .i_AiMaxdata = 4095,
- .i_AoMaxdata = 4095,
- .pr_AiRangelist = &range_apci3XXX_ai,
- .pr_AoRangelist = &range_apci3XXX_ao,
- .i_NbrDiChannel = 4,
- .i_NbrDoChannel = 4,
- .i_DoMaxdata = 1,
- .i_NbrTTLChannel = 24,
- .b_AvailableConvertUnit = 6,
- .ui_MinAcquisitiontimeNs = 5000,
- .interrupt = v_APCI3XXX_Interrupt,
- .reset = i_APCI3XXX_Reset,
- .ai_config = i_APCI3XXX_InsnConfigAnalogInput,
- .ai_read = i_APCI3XXX_InsnReadAnalogInput,
- .ao_write = i_APCI3XXX_InsnWriteAnalogOutput,
- .di_read = i_APCI3XXX_InsnReadDigitalInput,
- .di_bits = i_APCI3XXX_InsnBitsDigitalInput,
- .do_write = i_APCI3XXX_InsnWriteDigitalOutput,
- .do_bits = i_APCI3XXX_InsnBitsDigitalOutput,
- .do_read = i_APCI3XXX_InsnReadDigitalOutput,
- .ttl_config = i_APCI3XXX_InsnConfigInitTTLIO,
- .ttl_bits = i_APCI3XXX_InsnBitsTTLIO,
- .ttl_read = i_APCI3XXX_InsnReadTTLIO,
- .ttl_write = i_APCI3XXX_InsnWriteTTLIO,
- }, {
- .pc_DriverName = "apci3110-8-4",
- .i_VendorId = PCI_VENDOR_ID_ADDIDATA,
- .i_DeviceId = 0x3021,
- .i_IorangeBase0 = 256,
- .i_IorangeBase1 = 256,
- .i_IorangeBase2 = 256,
- .i_IorangeBase3 = 256,
- .i_PCIEeprom = ADDIDATA_NO_EEPROM,
- .pc_EepromChip = ADDIDATA_9054,
- .i_NbrAiChannel = 8,
- .i_NbrAiChannelDiff = 4,
- .i_AiChannelList = 8,
- .i_NbrAoChannel = 4,
- .i_AiMaxdata = 4095,
- .i_AoMaxdata = 4095,
- .pr_AiRangelist = &range_apci3XXX_ai,
- .pr_AoRangelist = &range_apci3XXX_ao,
- .i_NbrDiChannel = 4,
- .i_NbrDoChannel = 4,
- .i_DoMaxdata = 1,
- .i_NbrTTLChannel = 24,
- .b_AvailableConvertUnit = 6,
- .ui_MinAcquisitiontimeNs = 5000,
- .interrupt = v_APCI3XXX_Interrupt,
- .reset = i_APCI3XXX_Reset,
- .ai_config = i_APCI3XXX_InsnConfigAnalogInput,
- .ai_read = i_APCI3XXX_InsnReadAnalogInput,
- .ao_write = i_APCI3XXX_InsnWriteAnalogOutput,
- .di_read = i_APCI3XXX_InsnReadDigitalInput,
- .di_bits = i_APCI3XXX_InsnBitsDigitalInput,
- .do_write = i_APCI3XXX_InsnWriteDigitalOutput,
- .do_bits = i_APCI3XXX_InsnBitsDigitalOutput,
- .do_read = i_APCI3XXX_InsnReadDigitalOutput,
- .ttl_config = i_APCI3XXX_InsnConfigInitTTLIO,
- .ttl_bits = i_APCI3XXX_InsnBitsTTLIO,
- .ttl_read = i_APCI3XXX_InsnReadTTLIO,
- .ttl_write = i_APCI3XXX_InsnWriteTTLIO,
- }, {
- .pc_DriverName = "apci3116-16-4",
- .i_VendorId = PCI_VENDOR_ID_ADDIDATA,
- .i_DeviceId = 0x3022,
- .i_IorangeBase0 = 256,
- .i_IorangeBase1 = 256,
- .i_IorangeBase2 = 256,
- .i_IorangeBase3 = 256,
- .i_PCIEeprom = ADDIDATA_NO_EEPROM,
- .pc_EepromChip = ADDIDATA_9054,
- .i_NbrAiChannel = 16,
- .i_NbrAiChannelDiff = 8,
- .i_AiChannelList = 16,
- .i_NbrAoChannel = 4,
- .i_AiMaxdata = 65535,
- .i_AoMaxdata = 4095,
- .pr_AiRangelist = &range_apci3XXX_ai,
- .pr_AoRangelist = &range_apci3XXX_ao,
- .i_NbrDiChannel = 4,
- .i_NbrDoChannel = 4,
- .i_DoMaxdata = 1,
- .i_NbrTTLChannel = 24,
- .b_AvailableConvertUnit = 6,
- .ui_MinAcquisitiontimeNs = 5000,
- .interrupt = v_APCI3XXX_Interrupt,
- .reset = i_APCI3XXX_Reset,
- .ai_config = i_APCI3XXX_InsnConfigAnalogInput,
- .ai_read = i_APCI3XXX_InsnReadAnalogInput,
- .ao_write = i_APCI3XXX_InsnWriteAnalogOutput,
- .di_read = i_APCI3XXX_InsnReadDigitalInput,
- .di_bits = i_APCI3XXX_InsnBitsDigitalInput,
- .do_write = i_APCI3XXX_InsnWriteDigitalOutput,
- .do_bits = i_APCI3XXX_InsnBitsDigitalOutput,
- .do_read = i_APCI3XXX_InsnReadDigitalOutput,
- .ttl_config = i_APCI3XXX_InsnConfigInitTTLIO,
- .ttl_bits = i_APCI3XXX_InsnBitsTTLIO,
- .ttl_read = i_APCI3XXX_InsnReadTTLIO,
- .ttl_write = i_APCI3XXX_InsnWriteTTLIO,
- }, {
- .pc_DriverName = "apci3116-8-4",
- .i_VendorId = PCI_VENDOR_ID_ADDIDATA,
- .i_DeviceId = 0x3023,
- .i_IorangeBase0 = 256,
- .i_IorangeBase1 = 256,
- .i_IorangeBase2 = 256,
- .i_IorangeBase3 = 256,
- .i_PCIEeprom = ADDIDATA_NO_EEPROM,
- .pc_EepromChip = ADDIDATA_9054,
- .i_NbrAiChannel = 8,
- .i_NbrAiChannelDiff = 4,
- .i_AiChannelList = 8,
- .i_NbrAoChannel = 4,
- .i_AiMaxdata = 65535,
- .i_AoMaxdata = 4095,
- .pr_AiRangelist = &range_apci3XXX_ai,
- .pr_AoRangelist = &range_apci3XXX_ao,
- .i_NbrDiChannel = 4,
- .i_NbrDoChannel = 4,
- .i_DoMaxdata = 1,
- .i_NbrTTLChannel = 24,
- .b_AvailableConvertUnit = 6,
- .ui_MinAcquisitiontimeNs = 5000,
- .interrupt = v_APCI3XXX_Interrupt,
- .reset = i_APCI3XXX_Reset,
- .ai_config = i_APCI3XXX_InsnConfigAnalogInput,
- .ai_read = i_APCI3XXX_InsnReadAnalogInput,
- .ao_write = i_APCI3XXX_InsnWriteAnalogOutput,
- .di_read = i_APCI3XXX_InsnReadDigitalInput,
- .di_bits = i_APCI3XXX_InsnBitsDigitalInput,
- .do_write = i_APCI3XXX_InsnWriteDigitalOutput,
- .do_bits = i_APCI3XXX_InsnBitsDigitalOutput,
- .do_read = i_APCI3XXX_InsnReadDigitalOutput,
- .ttl_config = i_APCI3XXX_InsnConfigInitTTLIO,
- .ttl_bits = i_APCI3XXX_InsnBitsTTLIO,
- .ttl_read = i_APCI3XXX_InsnReadTTLIO,
- .ttl_write = i_APCI3XXX_InsnWriteTTLIO,
- }, {
- .pc_DriverName = "apci3003",
- .i_VendorId = PCI_VENDOR_ID_ADDIDATA,
- .i_DeviceId = 0x300B,
- .i_IorangeBase0 = 256,
- .i_IorangeBase1 = 256,
- .i_IorangeBase2 = 256,
- .i_IorangeBase3 = 256,
- .i_PCIEeprom = ADDIDATA_NO_EEPROM,
- .pc_EepromChip = ADDIDATA_9054,
- .i_NbrAiChannelDiff = 4,
- .i_AiChannelList = 4,
- .i_AiMaxdata = 65535,
- .pr_AiRangelist = &range_apci3XXX_ai,
- .i_NbrDiChannel = 4,
- .i_NbrDoChannel = 4,
- .i_DoMaxdata = 1,
- .b_AvailableConvertUnit = 7,
- .ui_MinAcquisitiontimeNs = 2500,
- .interrupt = v_APCI3XXX_Interrupt,
- .reset = i_APCI3XXX_Reset,
- .ai_config = i_APCI3XXX_InsnConfigAnalogInput,
- .ai_read = i_APCI3XXX_InsnReadAnalogInput,
- .di_read = i_APCI3XXX_InsnReadDigitalInput,
- .di_bits = i_APCI3XXX_InsnBitsDigitalInput,
- .do_write = i_APCI3XXX_InsnWriteDigitalOutput,
- .do_bits = i_APCI3XXX_InsnBitsDigitalOutput,
- .do_read = i_APCI3XXX_InsnReadDigitalOutput,
- }, {
- .pc_DriverName = "apci3002-16",
- .i_VendorId = PCI_VENDOR_ID_ADDIDATA,
- .i_DeviceId = 0x3002,
- .i_IorangeBase0 = 256,
- .i_IorangeBase1 = 256,
- .i_IorangeBase2 = 256,
- .i_IorangeBase3 = 256,
- .i_PCIEeprom = ADDIDATA_NO_EEPROM,
- .pc_EepromChip = ADDIDATA_9054,
- .i_NbrAiChannelDiff = 16,
- .i_AiChannelList = 16,
- .i_AiMaxdata = 65535,
- .pr_AiRangelist = &range_apci3XXX_ai,
- .i_NbrDiChannel = 4,
- .i_NbrDoChannel = 4,
- .i_DoMaxdata = 1,
- .b_AvailableConvertUnit = 6,
- .ui_MinAcquisitiontimeNs = 5000,
- .interrupt = v_APCI3XXX_Interrupt,
- .reset = i_APCI3XXX_Reset,
- .ai_config = i_APCI3XXX_InsnConfigAnalogInput,
- .ai_read = i_APCI3XXX_InsnReadAnalogInput,
- .di_read = i_APCI3XXX_InsnReadDigitalInput,
- .di_bits = i_APCI3XXX_InsnBitsDigitalInput,
- .do_write = i_APCI3XXX_InsnWriteDigitalOutput,
- .do_bits = i_APCI3XXX_InsnBitsDigitalOutput,
- .do_read = i_APCI3XXX_InsnReadDigitalOutput,
- }, {
- .pc_DriverName = "apci3002-8",
- .i_VendorId = PCI_VENDOR_ID_ADDIDATA,
- .i_DeviceId = 0x3003,
- .i_IorangeBase0 = 256,
- .i_IorangeBase1 = 256,
- .i_IorangeBase2 = 256,
- .i_IorangeBase3 = 256,
- .i_PCIEeprom = ADDIDATA_NO_EEPROM,
- .pc_EepromChip = ADDIDATA_9054,
- .i_NbrAiChannelDiff = 8,
- .i_AiChannelList = 8,
- .i_AiMaxdata = 65535,
- .pr_AiRangelist = &range_apci3XXX_ai,
- .i_NbrDiChannel = 4,
- .i_NbrDoChannel = 4,
- .i_DoMaxdata = 1,
- .b_AvailableConvertUnit = 6,
- .ui_MinAcquisitiontimeNs = 5000,
- .interrupt = v_APCI3XXX_Interrupt,
- .reset = i_APCI3XXX_Reset,
- .ai_config = i_APCI3XXX_InsnConfigAnalogInput,
- .ai_read = i_APCI3XXX_InsnReadAnalogInput,
- .di_read = i_APCI3XXX_InsnReadDigitalInput,
- .di_bits = i_APCI3XXX_InsnBitsDigitalInput,
- .do_write = i_APCI3XXX_InsnWriteDigitalOutput,
- .do_bits = i_APCI3XXX_InsnBitsDigitalOutput,
- .do_read = i_APCI3XXX_InsnReadDigitalOutput,
- }, {
- .pc_DriverName = "apci3002-4",
- .i_VendorId = PCI_VENDOR_ID_ADDIDATA,
- .i_DeviceId = 0x3004,
- .i_IorangeBase0 = 256,
- .i_IorangeBase1 = 256,
- .i_IorangeBase2 = 256,
- .i_IorangeBase3 = 256,
- .i_PCIEeprom = ADDIDATA_NO_EEPROM,
- .pc_EepromChip = ADDIDATA_9054,
- .i_NbrAiChannelDiff = 4,
- .i_AiChannelList = 4,
- .i_AiMaxdata = 65535,
- .pr_AiRangelist = &range_apci3XXX_ai,
- .i_NbrDiChannel = 4,
- .i_NbrDoChannel = 4,
- .i_DoMaxdata = 1,
- .b_AvailableConvertUnit = 6,
- .ui_MinAcquisitiontimeNs = 5000,
- .interrupt = v_APCI3XXX_Interrupt,
- .reset = i_APCI3XXX_Reset,
- .ai_config = i_APCI3XXX_InsnConfigAnalogInput,
- .ai_read = i_APCI3XXX_InsnReadAnalogInput,
- .di_read = i_APCI3XXX_InsnReadDigitalInput,
- .di_bits = i_APCI3XXX_InsnBitsDigitalInput,
- .do_write = i_APCI3XXX_InsnWriteDigitalOutput,
- .do_bits = i_APCI3XXX_InsnBitsDigitalOutput,
- .do_read = i_APCI3XXX_InsnReadDigitalOutput,
- }, {
- .pc_DriverName = "apci3500",
- .i_VendorId = PCI_VENDOR_ID_ADDIDATA,
- .i_DeviceId = 0x3024,
- .i_IorangeBase0 = 256,
- .i_IorangeBase1 = 256,
- .i_IorangeBase2 = 256,
- .i_IorangeBase3 = 256,
- .i_PCIEeprom = ADDIDATA_NO_EEPROM,
- .pc_EepromChip = ADDIDATA_9054,
- .i_NbrAoChannel = 4,
- .i_AoMaxdata = 4095,
- .pr_AoRangelist = &range_apci3XXX_ao,
- .i_NbrTTLChannel = 24,
- .interrupt = v_APCI3XXX_Interrupt,
- .reset = i_APCI3XXX_Reset,
- .ao_write = i_APCI3XXX_InsnWriteAnalogOutput,
- .ttl_config = i_APCI3XXX_InsnConfigInitTTLIO,
- .ttl_bits = i_APCI3XXX_InsnBitsTTLIO,
- .ttl_read = i_APCI3XXX_InsnReadTTLIO,
- .ttl_write = i_APCI3XXX_InsnWriteTTLIO,
- },
-#endif
-};
-
-static struct comedi_driver driver_addi = {
- .driver_name = ADDIDATA_DRIVER_NAME,
- .module = THIS_MODULE,
- .attach = i_ADDI_Attach,
- .detach = i_ADDI_Detach,
- .num_names = ARRAY_SIZE(boardtypes),
- .board_name = &boardtypes[0].pc_DriverName,
- .offset = sizeof(struct addi_board),
-};
-
-static int __devinit driver_addi_pci_probe(struct pci_dev *dev,
- const struct pci_device_id *ent)
+static int i_ADDIDATA_InsnReadEeprom(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
{
- return comedi_pci_auto_config(dev, &driver_addi);
+ const struct addi_board *this_board = comedi_board(dev);
+ struct addi_private *devpriv = dev->private;
+ unsigned short w_Address = CR_CHAN(insn->chanspec);
+ unsigned short w_Data;
+
+ w_Data = addi_eeprom_readw(devpriv->i_IobaseAmcc,
+ this_board->pc_EepromChip, 2 * w_Address);
+ data[0] = w_Data;
+
+ return insn->n;
}
-static void __devexit driver_addi_pci_remove(struct pci_dev *dev)
+static irqreturn_t v_ADDI_Interrupt(int irq, void *d)
{
- comedi_pci_auto_unconfig(dev);
+ struct comedi_device *dev = d;
+ const struct addi_board *this_board = comedi_board(dev);
+
+ this_board->interrupt(irq, d);
+ return IRQ_RETVAL(1);
}
-static struct pci_driver driver_addi_pci_driver = {
- .id_table = addi_apci_tbl,
- .probe = &driver_addi_pci_probe,
- .remove = __devexit_p(&driver_addi_pci_remove)
-};
-
-static int __init driver_addi_init_module(void)
+static int i_ADDI_Reset(struct comedi_device *dev)
{
- int retval;
+ const struct addi_board *this_board = comedi_board(dev);
- retval = comedi_driver_register(&driver_addi);
- if (retval < 0)
- return retval;
-
- driver_addi_pci_driver.name = (char *)driver_addi.driver_name;
- return pci_register_driver(&driver_addi_pci_driver);
+ this_board->reset(dev);
+ return 0;
}
-static void __exit driver_addi_cleanup_module(void)
+static const void *addi_find_boardinfo(struct comedi_device *dev,
+ struct pci_dev *pcidev)
{
- pci_unregister_driver(&driver_addi_pci_driver);
- comedi_driver_unregister(&driver_addi);
+ const void *p = dev->driver->board_name;
+ const struct addi_board *this_board;
+ int i;
+
+ for (i = 0; i < dev->driver->num_names; i++) {
+ this_board = p;
+ if (this_board->i_VendorId == pcidev->vendor &&
+ this_board->i_DeviceId == pcidev->device)
+ return this_board;
+ p += dev->driver->offset;
+ }
+ return NULL;
}
-module_init(driver_addi_init_module);
-module_exit(driver_addi_cleanup_module);
-
-/*
-+----------------------------------------------------------------------------+
-| Function name :static int i_ADDI_Attach(struct comedi_device *dev, |
-| struct comedi_devconfig *it) |
-| |
-+----------------------------------------------------------------------------+
-| Task :Detects the card. |
-| Configure the driver for a particular board. |
-| This function does all the initializations and memory |
-| allocation of data structures for the driver. |
-+----------------------------------------------------------------------------+
-| Input Parameters :struct comedi_device *dev |
-| struct comedi_devconfig *it |
-| |
-+----------------------------------------------------------------------------+
-| Return Value : 0 |
-| |
-+----------------------------------------------------------------------------+
-*/
-
-static int i_ADDI_Attach(struct comedi_device *dev, struct comedi_devconfig *it)
+static int addi_auto_attach(struct comedi_device *dev,
+ unsigned long context_unused)
{
+ struct pci_dev *pcidev = comedi_to_pci_dev(dev);
+ const struct addi_board *this_board;
+ struct addi_private *devpriv;
struct comedi_subdevice *s;
- int ret, pages, i, n_subdevices;
+ int ret, n_subdevices;
unsigned int dw_Dummy;
- resource_size_t io_addr[5];
- unsigned int irq;
- resource_size_t iobase_a, iobase_main, iobase_addon, iobase_reserved;
- struct pcilst_struct *card = NULL;
- unsigned char pci_bus, pci_slot, pci_func;
- int i_Dma = 0;
- ret = alloc_private(dev, sizeof(struct addi_private));
- if (ret < 0)
+ this_board = addi_find_boardinfo(dev, pcidev);
+ if (!this_board)
+ return -ENODEV;
+ dev->board_ptr = this_board;
+ dev->board_name = this_board->pc_DriverName;
+
+ devpriv = kzalloc(sizeof(*devpriv), GFP_KERNEL);
+ if (!devpriv)
return -ENOMEM;
+ dev->private = devpriv;
- if (!pci_list_builded) {
- v_pci_card_list_init(this_board->i_VendorId, 1); /* 1 for displaying the list.. */
- pci_list_builded = 1;
- }
- /* printk("comedi%d: "ADDIDATA_DRIVER_NAME": board=%s",dev->minor,this_board->pc_DriverName); */
+ ret = comedi_pci_enable(pcidev, dev->board_name);
+ if (ret)
+ return ret;
- if ((this_board->i_Dma) && (it->options[2] == 0)) {
- i_Dma = 1;
- }
+ if (!this_board->pc_EepromChip ||
+ strcmp(this_board->pc_EepromChip, ADDIDATA_9054)) {
+ /* board does not have an eeprom or is not ADDIDATA_9054 */
+ if (this_board->i_IorangeBase1)
+ dev->iobase = pci_resource_start(pcidev, 1);
+ else
+ dev->iobase = pci_resource_start(pcidev, 0);
- card = ptr_select_and_alloc_pci_card(this_board->i_VendorId,
- this_board->i_DeviceId,
- it->options[0],
- it->options[1], i_Dma);
-
- if (card == NULL)
- return -EIO;
-
- devpriv->allocated = 1;
-
- if ((i_pci_card_data(card, &pci_bus, &pci_slot, &pci_func, &io_addr[0],
- &irq)) < 0) {
- i_pci_card_free(card);
- printk(" - Can't get AMCC data!\n");
- return -EIO;
- }
-
- iobase_a = io_addr[0];
- iobase_main = io_addr[1];
- iobase_addon = io_addr[2];
- iobase_reserved = io_addr[3];
- printk("\nBus %d: Slot %d: Funct%d\nBase0: 0x%8llx\nBase1: 0x%8llx\nBase2: 0x%8llx\nBase3: 0x%8llx\n", pci_bus, pci_slot, pci_func, (unsigned long long)io_addr[0], (unsigned long long)io_addr[1], (unsigned long long)io_addr[2], (unsigned long long)io_addr[3]);
-
- if ((this_board->pc_EepromChip == NULL)
- || (strcmp(this_board->pc_EepromChip, ADDIDATA_9054) != 0)) {
- /************************************/
- /* Test if more that 1 address used */
- /************************************/
-
- if (this_board->i_IorangeBase1 != 0) {
- dev->iobase = (unsigned long)iobase_main; /* DAQ base address... */
- } else {
- dev->iobase = (unsigned long)iobase_a; /* DAQ base address... */
- }
-
- dev->board_name = this_board->pc_DriverName;
- devpriv->amcc = card;
- devpriv->iobase = (int) dev->iobase;
- devpriv->i_IobaseAmcc = (int) iobase_a; /* AMCC base address... */
- devpriv->i_IobaseAddon = (int) iobase_addon; /* ADD ON base address.... */
- devpriv->i_IobaseReserved = (int) iobase_reserved;
+ devpriv->iobase = dev->iobase;
+ devpriv->i_IobaseAmcc = pci_resource_start(pcidev, 0);
+ devpriv->i_IobaseAddon = pci_resource_start(pcidev, 2);
} else {
- dev->board_name = this_board->pc_DriverName;
- dev->iobase = (unsigned long)io_addr[2];
- devpriv->amcc = card;
- devpriv->iobase = (int) io_addr[2];
- devpriv->i_IobaseReserved = (int) io_addr[3];
- printk("\nioremap begin");
- devpriv->dw_AiBase = ioremap(io_addr[3],
+ /* board has an ADDIDATA_9054 eeprom */
+ dev->iobase = pci_resource_start(pcidev, 2);
+ devpriv->iobase = pci_resource_start(pcidev, 2);
+ devpriv->dw_AiBase = ioremap(pci_resource_start(pcidev, 3),
this_board->i_IorangeBase3);
- printk("\nioremap end");
}
+ devpriv->i_IobaseReserved = pci_resource_start(pcidev, 3);
/* Initialize parameters that can be overridden in EEPROM */
devpriv->s_EeParameters.i_NbrAiChannel = this_board->i_NbrAiChannel;
@@ -1566,30 +155,19 @@
/* ## */
- if (irq > 0) {
- if (request_irq(irq, v_ADDI_Interrupt, IRQF_SHARED,
- this_board->pc_DriverName, dev) < 0) {
- printk(", unable to allocate IRQ %u, DISABLING IT",
- irq);
- irq = 0; /* Can't use IRQ */
- } else {
- printk("\nirq=%u", irq);
- }
- } else {
- printk(", IRQ disabled");
+ if (pcidev->irq > 0) {
+ ret = request_irq(pcidev->irq, v_ADDI_Interrupt, IRQF_SHARED,
+ dev->board_name, dev);
+ if (ret == 0)
+ dev->irq = pcidev->irq;
}
- printk("\nOption %d %d %d\n", it->options[0], it->options[1],
- it->options[2]);
- dev->irq = irq;
-
/* Read eepeom and fill addi_board Structure */
if (this_board->i_PCIEeprom) {
- printk("\nPCI Eeprom used");
if (!(strcmp(this_board->pc_EepromChip, "S5920"))) {
/* Set 3 wait stait */
- if (!(strcmp(this_board->pc_DriverName, "apci035"))) {
+ if (!(strcmp(dev->board_name, "apci035"))) {
outl(0x80808082, devpriv->i_IobaseAmcc + 0x60);
} else {
outl(0x83838383, devpriv->i_IobaseAmcc + 0x60);
@@ -1597,340 +175,174 @@
/* Enable the interrupt for the controller */
dw_Dummy = inl(devpriv->i_IobaseAmcc + 0x38);
outl(dw_Dummy | 0x2000, devpriv->i_IobaseAmcc + 0x38);
- printk("\nEnable the interrupt for the controller");
}
- printk("\nRead Eeprom");
- i_EepromReadMainHeader(io_addr[0], this_board->pc_EepromChip,
- dev);
+ addi_eeprom_read_info(dev, pci_resource_start(pcidev, 0));
+ }
+
+ n_subdevices = 7;
+ ret = comedi_alloc_subdevices(dev, n_subdevices);
+ if (ret)
+ return ret;
+
+ /* Allocate and Initialise AI Subdevice Structures */
+ s = &dev->subdevices[0];
+ if ((devpriv->s_EeParameters.i_NbrAiChannel)
+ || (this_board->i_NbrAiChannelDiff)) {
+ dev->read_subdev = s;
+ s->type = COMEDI_SUBD_AI;
+ s->subdev_flags =
+ SDF_READABLE | SDF_COMMON | SDF_GROUND
+ | SDF_DIFF;
+ if (devpriv->s_EeParameters.i_NbrAiChannel) {
+ s->n_chan =
+ devpriv->s_EeParameters.i_NbrAiChannel;
+ devpriv->b_SingelDiff = 0;
+ } else {
+ s->n_chan = this_board->i_NbrAiChannelDiff;
+ devpriv->b_SingelDiff = 1;
+ }
+ s->maxdata = devpriv->s_EeParameters.i_AiMaxdata;
+ s->len_chanlist = this_board->i_AiChannelList;
+ s->range_table = this_board->pr_AiRangelist;
+
+ /* Set the initialisation flag */
+ devpriv->b_AiInitialisation = 1;
+
+ s->insn_config = this_board->ai_config;
+ s->insn_read = this_board->ai_read;
+ s->insn_write = this_board->ai_write;
+ s->insn_bits = this_board->ai_bits;
+ s->do_cmdtest = this_board->ai_cmdtest;
+ s->do_cmd = this_board->ai_cmd;
+ s->cancel = this_board->ai_cancel;
+
} else {
- printk("\nPCI Eeprom unused");
+ s->type = COMEDI_SUBD_UNUSED;
}
- if (it->options[2] > 0) {
- devpriv->us_UseDma = ADDI_DISABLE;
+ /* Allocate and Initialise AO Subdevice Structures */
+ s = &dev->subdevices[1];
+ if (devpriv->s_EeParameters.i_NbrAoChannel) {
+ s->type = COMEDI_SUBD_AO;
+ s->subdev_flags = SDF_WRITEABLE | SDF_GROUND | SDF_COMMON;
+ s->n_chan = devpriv->s_EeParameters.i_NbrAoChannel;
+ s->maxdata = devpriv->s_EeParameters.i_AoMaxdata;
+ s->len_chanlist =
+ devpriv->s_EeParameters.i_NbrAoChannel;
+ s->range_table = this_board->pr_AoRangelist;
+ s->insn_config = this_board->ao_config;
+ s->insn_write = this_board->ao_write;
} else {
- devpriv->us_UseDma = ADDI_ENABLE;
+ s->type = COMEDI_SUBD_UNUSED;
}
-
- if (devpriv->s_EeParameters.i_Dma) {
- printk("\nDMA used");
- if (devpriv->us_UseDma == ADDI_ENABLE) {
- /* alloc DMA buffers */
- devpriv->b_DmaDoubleBuffer = 0;
- for (i = 0; i < 2; i++) {
- for (pages = 4; pages >= 0; pages--) {
- devpriv->ul_DmaBufferVirtual[i] =
- (void *) __get_free_pages(GFP_KERNEL, pages);
-
- if (devpriv->ul_DmaBufferVirtual[i])
- break;
- }
- if (devpriv->ul_DmaBufferVirtual[i]) {
- devpriv->ui_DmaBufferPages[i] = pages;
- devpriv->ui_DmaBufferSize[i] =
- PAGE_SIZE * pages;
- devpriv->ui_DmaBufferSamples[i] =
- devpriv->
- ui_DmaBufferSize[i] >> 1;
- devpriv->ul_DmaBufferHw[i] =
- virt_to_bus((void *)devpriv->
- ul_DmaBufferVirtual[i]);
- }
- }
- if (!devpriv->ul_DmaBufferVirtual[0]) {
- printk
- (", Can't allocate DMA buffer, DMA disabled!");
- devpriv->us_UseDma = ADDI_DISABLE;
- }
-
- if (devpriv->ul_DmaBufferVirtual[1]) {
- devpriv->b_DmaDoubleBuffer = 1;
- }
- }
-
- if ((devpriv->us_UseDma == ADDI_ENABLE)) {
- printk("\nDMA ENABLED\n");
- } else {
- printk("\nDMA DISABLED\n");
- }
- }
-
- if (!strcmp(this_board->pc_DriverName, "apci1710")) {
-#ifdef CONFIG_APCI_1710
- i_ADDI_AttachPCI1710(dev);
-
- /* save base address */
- devpriv->s_BoardInfos.ui_Address = io_addr[2];
-#endif
+ /* Allocate and Initialise DI Subdevice Structures */
+ s = &dev->subdevices[2];
+ if (devpriv->s_EeParameters.i_NbrDiChannel) {
+ s->type = COMEDI_SUBD_DI;
+ s->subdev_flags = SDF_READABLE | SDF_GROUND | SDF_COMMON;
+ s->n_chan = devpriv->s_EeParameters.i_NbrDiChannel;
+ s->maxdata = 1;
+ s->len_chanlist =
+ devpriv->s_EeParameters.i_NbrDiChannel;
+ s->range_table = &range_digital;
+ s->io_bits = 0; /* all bits input */
+ s->insn_config = this_board->di_config;
+ s->insn_read = this_board->di_read;
+ s->insn_write = this_board->di_write;
+ s->insn_bits = this_board->di_bits;
} else {
- n_subdevices = 7;
- ret = comedi_alloc_subdevices(dev, n_subdevices);
- if (ret)
- return ret;
+ s->type = COMEDI_SUBD_UNUSED;
+ }
+ /* Allocate and Initialise DO Subdevice Structures */
+ s = &dev->subdevices[3];
+ if (devpriv->s_EeParameters.i_NbrDoChannel) {
+ s->type = COMEDI_SUBD_DO;
+ s->subdev_flags =
+ SDF_READABLE | SDF_WRITEABLE | SDF_GROUND | SDF_COMMON;
+ s->n_chan = devpriv->s_EeParameters.i_NbrDoChannel;
+ s->maxdata = devpriv->s_EeParameters.i_DoMaxdata;
+ s->len_chanlist =
+ devpriv->s_EeParameters.i_NbrDoChannel;
+ s->range_table = &range_digital;
+ s->io_bits = 0xf; /* all bits output */
- /* Allocate and Initialise AI Subdevice Structures */
- s = &dev->subdevices[0];
- if ((devpriv->s_EeParameters.i_NbrAiChannel)
- || (this_board->i_NbrAiChannelDiff)) {
- dev->read_subdev = s;
- s->type = COMEDI_SUBD_AI;
- s->subdev_flags =
- SDF_READABLE | SDF_COMMON | SDF_GROUND
- | SDF_DIFF;
- if (devpriv->s_EeParameters.i_NbrAiChannel) {
- s->n_chan =
- devpriv->s_EeParameters.i_NbrAiChannel;
- devpriv->b_SingelDiff = 0;
- } else {
- s->n_chan = this_board->i_NbrAiChannelDiff;
- devpriv->b_SingelDiff = 1;
- }
- s->maxdata = devpriv->s_EeParameters.i_AiMaxdata;
- s->len_chanlist = this_board->i_AiChannelList;
- s->range_table = this_board->pr_AiRangelist;
-
- /* Set the initialisation flag */
- devpriv->b_AiInitialisation = 1;
-
- s->insn_config = this_board->ai_config;
- s->insn_read = this_board->ai_read;
- s->insn_write = this_board->ai_write;
- s->insn_bits = this_board->ai_bits;
- s->do_cmdtest = this_board->ai_cmdtest;
- s->do_cmd = this_board->ai_cmd;
- s->cancel = this_board->ai_cancel;
-
- } else {
- s->type = COMEDI_SUBD_UNUSED;
- }
-
- /* Allocate and Initialise AO Subdevice Structures */
- s = &dev->subdevices[1];
- if (devpriv->s_EeParameters.i_NbrAoChannel) {
- s->type = COMEDI_SUBD_AO;
- s->subdev_flags = SDF_WRITEABLE | SDF_GROUND | SDF_COMMON;
- s->n_chan = devpriv->s_EeParameters.i_NbrAoChannel;
- s->maxdata = devpriv->s_EeParameters.i_AoMaxdata;
- s->len_chanlist =
- devpriv->s_EeParameters.i_NbrAoChannel;
- s->range_table = this_board->pr_AoRangelist;
- s->insn_config = this_board->ao_config;
- s->insn_write = this_board->ao_write;
- } else {
- s->type = COMEDI_SUBD_UNUSED;
- }
- /* Allocate and Initialise DI Subdevice Structures */
- s = &dev->subdevices[2];
- if (devpriv->s_EeParameters.i_NbrDiChannel) {
- s->type = COMEDI_SUBD_DI;
- s->subdev_flags = SDF_READABLE | SDF_GROUND | SDF_COMMON;
- s->n_chan = devpriv->s_EeParameters.i_NbrDiChannel;
- s->maxdata = 1;
- s->len_chanlist =
- devpriv->s_EeParameters.i_NbrDiChannel;
- s->range_table = &range_digital;
- s->io_bits = 0; /* all bits input */
- s->insn_config = this_board->di_config;
- s->insn_read = this_board->di_read;
- s->insn_write = this_board->di_write;
- s->insn_bits = this_board->di_bits;
- } else {
- s->type = COMEDI_SUBD_UNUSED;
- }
- /* Allocate and Initialise DO Subdevice Structures */
- s = &dev->subdevices[3];
- if (devpriv->s_EeParameters.i_NbrDoChannel) {
- s->type = COMEDI_SUBD_DO;
- s->subdev_flags =
- SDF_READABLE | SDF_WRITEABLE | SDF_GROUND | SDF_COMMON;
- s->n_chan = devpriv->s_EeParameters.i_NbrDoChannel;
- s->maxdata = devpriv->s_EeParameters.i_DoMaxdata;
- s->len_chanlist =
- devpriv->s_EeParameters.i_NbrDoChannel;
- s->range_table = &range_digital;
- s->io_bits = 0xf; /* all bits output */
-
- /* insn_config - for digital output memory */
- s->insn_config = this_board->do_config;
- s->insn_write = this_board->do_write;
- s->insn_bits = this_board->do_bits;
- s->insn_read = this_board->do_read;
- } else {
- s->type = COMEDI_SUBD_UNUSED;
- }
-
- /* Allocate and Initialise Timer Subdevice Structures */
- s = &dev->subdevices[4];
- if (devpriv->s_EeParameters.i_Timer) {
- s->type = COMEDI_SUBD_TIMER;
- s->subdev_flags = SDF_WRITEABLE | SDF_GROUND | SDF_COMMON;
- s->n_chan = 1;
- s->maxdata = 0;
- s->len_chanlist = 1;
- s->range_table = &range_digital;
-
- s->insn_write = this_board->timer_write;
- s->insn_read = this_board->timer_read;
- s->insn_config = this_board->timer_config;
- s->insn_bits = this_board->timer_bits;
- } else {
- s->type = COMEDI_SUBD_UNUSED;
- }
-
- /* Allocate and Initialise TTL */
- s = &dev->subdevices[5];
- if (this_board->i_NbrTTLChannel) {
- s->type = COMEDI_SUBD_TTLIO;
- s->subdev_flags =
- SDF_WRITEABLE | SDF_READABLE | SDF_GROUND | SDF_COMMON;
- s->n_chan = this_board->i_NbrTTLChannel;
- s->maxdata = 1;
- s->io_bits = 0; /* all bits input */
- s->len_chanlist = this_board->i_NbrTTLChannel;
- s->range_table = &range_digital;
- s->insn_config = this_board->ttl_config;
- s->insn_bits = this_board->ttl_bits;
- s->insn_read = this_board->ttl_read;
- s->insn_write = this_board->ttl_write;
- } else {
- s->type = COMEDI_SUBD_UNUSED;
- }
-
- /* EEPROM */
- s = &dev->subdevices[6];
- if (this_board->i_PCIEeprom) {
- s->type = COMEDI_SUBD_MEMORY;
- s->subdev_flags = SDF_READABLE | SDF_INTERNAL;
- s->n_chan = 256;
- s->maxdata = 0xffff;
- s->insn_read = i_ADDIDATA_InsnReadEeprom;
- } else {
- s->type = COMEDI_SUBD_UNUSED;
- }
+ /* insn_config - for digital output memory */
+ s->insn_config = this_board->do_config;
+ s->insn_write = this_board->do_write;
+ s->insn_bits = this_board->do_bits;
+ s->insn_read = this_board->do_read;
+ } else {
+ s->type = COMEDI_SUBD_UNUSED;
}
- printk("\ni_ADDI_Attach end\n");
+ /* Allocate and Initialise Timer Subdevice Structures */
+ s = &dev->subdevices[4];
+ if (devpriv->s_EeParameters.i_Timer) {
+ s->type = COMEDI_SUBD_TIMER;
+ s->subdev_flags = SDF_WRITEABLE | SDF_GROUND | SDF_COMMON;
+ s->n_chan = 1;
+ s->maxdata = 0;
+ s->len_chanlist = 1;
+ s->range_table = &range_digital;
+
+ s->insn_write = this_board->timer_write;
+ s->insn_read = this_board->timer_read;
+ s->insn_config = this_board->timer_config;
+ s->insn_bits = this_board->timer_bits;
+ } else {
+ s->type = COMEDI_SUBD_UNUSED;
+ }
+
+ /* Allocate and Initialise TTL */
+ s = &dev->subdevices[5];
+ if (this_board->i_NbrTTLChannel) {
+ s->type = COMEDI_SUBD_TTLIO;
+ s->subdev_flags =
+ SDF_WRITEABLE | SDF_READABLE | SDF_GROUND | SDF_COMMON;
+ s->n_chan = this_board->i_NbrTTLChannel;
+ s->maxdata = 1;
+ s->io_bits = 0; /* all bits input */
+ s->len_chanlist = this_board->i_NbrTTLChannel;
+ s->range_table = &range_digital;
+ s->insn_config = this_board->ttl_config;
+ s->insn_bits = this_board->ttl_bits;
+ s->insn_read = this_board->ttl_read;
+ s->insn_write = this_board->ttl_write;
+ } else {
+ s->type = COMEDI_SUBD_UNUSED;
+ }
+
+ /* EEPROM */
+ s = &dev->subdevices[6];
+ if (this_board->i_PCIEeprom) {
+ s->type = COMEDI_SUBD_MEMORY;
+ s->subdev_flags = SDF_READABLE | SDF_INTERNAL;
+ s->n_chan = 256;
+ s->maxdata = 0xffff;
+ s->insn_read = i_ADDIDATA_InsnReadEeprom;
+ } else {
+ s->type = COMEDI_SUBD_UNUSED;
+ }
+
i_ADDI_Reset(dev);
- devpriv->b_ValidDriver = 1;
return 0;
}
static void i_ADDI_Detach(struct comedi_device *dev)
{
- if (dev->private) {
- if (devpriv->b_ValidDriver)
+ struct pci_dev *pcidev = comedi_to_pci_dev(dev);
+ struct addi_private *devpriv = dev->private;
+
+ if (devpriv) {
+ if (dev->iobase)
i_ADDI_Reset(dev);
if (dev->irq)
free_irq(dev->irq, dev);
- if ((this_board->pc_EepromChip == NULL) ||
- (strcmp(this_board->pc_EepromChip, ADDIDATA_9054) != 0)) {
- if (devpriv->allocated)
- i_pci_card_free(devpriv->amcc);
- if (devpriv->ul_DmaBufferVirtual[0]) {
- free_pages((unsigned long)devpriv->
- ul_DmaBufferVirtual[0],
- devpriv->ui_DmaBufferPages[0]);
- }
- if (devpriv->ul_DmaBufferVirtual[1]) {
- free_pages((unsigned long)devpriv->
- ul_DmaBufferVirtual[1],
- devpriv->ui_DmaBufferPages[1]);
- }
- } else {
+ if (devpriv->dw_AiBase)
iounmap(devpriv->dw_AiBase);
- if (devpriv->allocated)
- i_pci_card_free(devpriv->amcc);
- }
- if (pci_list_builded) {
- v_pci_card_list_cleanup(this_board->i_VendorId);
- pci_list_builded = 0;
- }
}
-}
-
-/*
-+----------------------------------------------------------------------------+
-| Function name : static int i_ADDI_Reset(struct comedi_device *dev) |
-| |
-+----------------------------------------------------------------------------+
-| Task : Disables all interrupts, Resets digital output to low, |
-| Set all analog output to low |
-| |
-+----------------------------------------------------------------------------+
-| Input Parameters : struct comedi_device *dev |
-| |
-| |
-+----------------------------------------------------------------------------+
-| Return Value : 0 |
-| |
-+----------------------------------------------------------------------------+
-*/
-
-static int i_ADDI_Reset(struct comedi_device *dev)
-{
-
- this_board->reset(dev);
- return 0;
-}
-
-/* Interrupt function */
-/*
-+----------------------------------------------------------------------------+
-| Function name : |
-|static void v_ADDI_Interrupt(int irq, void *d) |
-| |
-+----------------------------------------------------------------------------+
-| Task : Registerd interrupt routine |
-| |
-+----------------------------------------------------------------------------+
-| Input Parameters : int irq |
-| |
-| |
-+----------------------------------------------------------------------------+
-| Return Value : |
-| |
-+----------------------------------------------------------------------------+
-*/
-
-static irqreturn_t v_ADDI_Interrupt(int irq, void *d)
-{
- struct comedi_device *dev = d;
- this_board->interrupt(irq, d);
- return IRQ_RETVAL(1);
-}
-
-/* EEPROM Read Function */
-/*
-+----------------------------------------------------------------------------+
-| Function name : |
-|INT i_ADDIDATA_InsnReadEeprom(struct comedi_device *dev,struct comedi_subdevice *s,
- struct comedi_insn *insn,unsigned int *data)
-| |
-+----------------------------------------------------------------------------+
-| Task : Read 256 words from EEPROM |
-| |
-+----------------------------------------------------------------------------+
-| Input Parameters :(struct comedi_device *dev,struct comedi_subdevice *s,
- struct comedi_insn *insn,unsigned int *data) |
-| |
-| |
-+----------------------------------------------------------------------------+
-| Return Value : |
-| |
-+----------------------------------------------------------------------------+
-*/
-
-static int i_ADDIDATA_InsnReadEeprom(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data)
-{
- unsigned short w_Data;
- unsigned short w_Address;
- w_Address = CR_CHAN(insn->chanspec); /* address to be read as 0,1,2,3...255 */
-
- w_Data = w_EepromReadWord(devpriv->i_IobaseAmcc,
- this_board->pc_EepromChip, 0x100 + (2 * w_Address));
- data[0] = w_Data;
- /* multiplied by 2 bcozinput will be like 0,1,2...255 */
- return insn->n;
-
+ if (pcidev) {
+ if (dev->iobase)
+ comedi_pci_disable(pcidev);
+ }
}
diff --git a/drivers/staging/comedi/drivers/addi-data/addi_common.h b/drivers/staging/comedi/drivers/addi-data/addi_common.h
index b7bbb71..6d8b29f94 100644
--- a/drivers/staging/comedi/drivers/addi-data/addi_common.h
+++ b/drivers/staging/comedi/drivers/addi-data/addi_common.h
@@ -15,26 +15,8 @@
* any later version.
*/
-#include <linux/kernel.h>
-#include <linux/module.h>
#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/slab.h>
-#include <linux/errno.h>
-#include <linux/ioport.h>
-#include <linux/delay.h>
#include <linux/interrupt.h>
-#include <linux/timex.h>
-#include <linux/timer.h>
-#include <linux/pci.h>
-#include <linux/io.h>
-#include <linux/kmod.h>
-#include <linux/uaccess.h>
-#include "../../comedidev.h"
-#include "addi_amcc_s5933.h"
-
-#define ERROR -1
-#define SUCCESS 1
#define LOBYTE(W) (unsigned char)((W) & 0xFF)
#define HIBYTE(W) (unsigned char)(((W) >> 8) & 0xFF)
@@ -312,9 +294,6 @@
int i_IobaseAddon; /* addon base address */
int i_IobaseReserved;
void __iomem *dw_AiBase;
- struct pcilst_struct *amcc; /* ptr too AMCC data */
- unsigned char allocated; /* we have blocked card */
- unsigned char b_ValidDriver; /* driver is ok */
unsigned char b_AiContinuous; /* we do unlimited AI */
unsigned char b_AiInitialisation;
unsigned int ui_AiActualScan; /* how many scans we finished */
@@ -410,14 +389,3 @@
/* Minimum Delay in Nano secs */
} s_EeParameters;
};
-
-static unsigned short pci_list_builded; /* set to 1 when list of card is known */
-
-/* Function declarations */
-static int i_ADDI_Attach(struct comedi_device *dev, struct comedi_devconfig *it);
-static void i_ADDI_Detach(struct comedi_device *dev);
-static int i_ADDI_Reset(struct comedi_device *dev);
-
-static irqreturn_t v_ADDI_Interrupt(int irq, void *d);
-static int i_ADDIDATA_InsnReadEeprom(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
diff --git a/drivers/staging/comedi/drivers/addi-data/addi_eeprom.c b/drivers/staging/comedi/drivers/addi-data/addi_eeprom.c
index 3a9339b..5124ac9 100644
--- a/drivers/staging/comedi/drivers/addi-data/addi_eeprom.c
+++ b/drivers/staging/comedi/drivers/addi-data/addi_eeprom.c
@@ -1,1162 +1,365 @@
-/**
-@verbatim
-
-Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module.
-
- ADDI-DATA GmbH
- Dieselstrasse 3
- D-77833 Ottersweier
- Tel: +19(0)7223/9493-0
- Fax: +49(0)7223/9493-92
- http://www.addi-data.com
- info@addi-data.com
-
-This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
-
-This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-
-You should also find the complete GPL in the COPYING file accompanying this source code.
-
-@endverbatim
-*/
/*
+ * addi_eeprom.c - ADDI EEPROM Module
+ * Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module.
+ * Project manager: Eric Stolz
+ *
+ * ADDI-DATA GmbH
+ * Dieselstrasse 3
+ * D-77833 Ottersweier
+ * Tel: +19(0)7223/9493-0
+ * Fax: +49(0)7223/9493-92
+ * http://www.addi-data.com
+ * info@addi-data.com
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * You should also find the complete GPL in the COPYING file accompanying
+ * this source code.
+ */
- +-----------------------------------------------------------------------+
- | (C) ADDI-DATA GmbH Dieselstrasse 3 D-77833 Ottersweier |
- +-----------------------------------------------------------------------+
- | Tel : +49 (0) 7223/9493-0 | email : info@addi-data.com |
- | Fax : +49 (0) 7223/9493-92 | Internet : http://www.addi-data.com |
- +-----------------------------------------------------------------------+
- | Project : ADDI DATA | Compiler : GCC |
- | Modulname : addi_eeprom.c | Version : 2.96 |
- +-------------------------------+---------------------------------------+
- | Project manager: Eric Stolz | Date : 02/12/2002 |
- +-----------------------------------------------------------------------+
- | Description : ADDI EEPROM Module |
- +-----------------------------------------------------------------------+
- | UPDATE'S |
- +-----------------------------------------------------------------------+
- | Date | Author | Description of updates |
- +----------+-----------+------------------------------------------------+
- | | | |
- | | | |
- +----------+-----------+------------------------------------------------+
-*/
+#define NVRAM_USER_DATA_START 0x100
-#define NVCMD_BEGIN_READ (0x7 << 5) /* nvRam begin read command */
-#define NVCMD_LOAD_LOW (0x4 << 5) /* nvRam load low command */
-#define NVCMD_LOAD_HIGH (0x5 << 5) /* nvRam load high command */
-#define EE76_CMD_LEN 13 /* bits in instructions */
-#define EE_READ 0x0180 /* 01 1000 0000 read instruction */
+#define NVCMD_BEGIN_READ (0x7 << 5) /* nvRam begin read command */
+#define NVCMD_LOAD_LOW (0x4 << 5) /* nvRam load low command */
+#define NVCMD_LOAD_HIGH (0x5 << 5) /* nvRam load high command */
-#define EEPROM_DIGITALINPUT 0
-#define EEPROM_DIGITALOUTPUT 1
-#define EEPROM_ANALOGINPUT 2
-#define EEPROM_ANALOGOUTPUT 3
-#define EEPROM_TIMER 4
-#define EEPROM_WATCHDOG 5
+#define EE93C76_CLK_BIT (1 << 0)
+#define EE93C76_CS_BIT (1 << 1)
+#define EE93C76_DOUT_BIT (1 << 2)
+#define EE93C76_DIN_BIT (1 << 3)
+#define EE93C76_READ_CMD (0x0180 << 4)
+#define EE93C76_CMD_LEN 13
+
+#define EEPROM_DIGITALINPUT 0
+#define EEPROM_DIGITALOUTPUT 1
+#define EEPROM_ANALOGINPUT 2
+#define EEPROM_ANALOGOUTPUT 3
+#define EEPROM_TIMER 4
+#define EEPROM_WATCHDOG 5
#define EEPROM_TIMER_WATCHDOG_COUNTER 10
-struct str_Functionality {
- unsigned char b_Type;
- unsigned short w_Address;
-};
-
-struct str_MainHeader {
- unsigned short w_HeaderSize;
- unsigned char b_Nfunctions;
- struct str_Functionality s_Functions[7];
-};
-
-struct str_DigitalInputHeader {
- unsigned short w_Nchannel;
- unsigned char b_Interruptible;
- unsigned short w_NinterruptLogic;
-};
-
-struct str_DigitalOutputHeader {
-
- unsigned short w_Nchannel;
-};
-
-
-/* used for timer as well as watchdog */
-
-struct str_TimerDetails {
-
- unsigned short w_HeaderSize;
- unsigned char b_Resolution;
- unsigned char b_Mode; /* in case of Watchdog it is functionality */
- unsigned short w_MinTiming;
- unsigned char b_TimeBase;
-};
-
-struct str_TimerMainHeader {
-
-
- unsigned short w_Ntimer;
- struct str_TimerDetails s_TimerDetails[4]; /* supports 4 timers */
-};
-
-
-struct str_AnalogOutputHeader {
- unsigned short w_Nchannel;
- unsigned char b_Resolution;
-};
-
-struct str_AnalogInputHeader {
- unsigned short w_Nchannel;
- unsigned short w_MinConvertTiming;
- unsigned short w_MinDelayTiming;
- unsigned char b_HasDma;
- unsigned char b_Resolution;
-};
-
-
- /*****************************************/
- /* Read Header Functions */
- /*****************************************/
-
-int i_EepromReadMainHeader(unsigned short w_PCIBoardEepromAddress,
- char *pc_PCIChipInformation, struct comedi_device *dev);
-
-int i_EepromReadDigitalInputHeader(unsigned short w_PCIBoardEepromAddress,
- char *pc_PCIChipInformation, unsigned short w_Address,
- struct str_DigitalInputHeader *s_Header);
-
-int i_EepromReadDigitalOutputHeader(unsigned short w_PCIBoardEepromAddress,
- char *pc_PCIChipInformation, unsigned short w_Address,
- struct str_DigitalOutputHeader *s_Header);
-
-int i_EepromReadTimerHeader(unsigned short w_PCIBoardEepromAddress,
- char *pc_PCIChipInformation, unsigned short w_Address,
- struct str_TimerMainHeader *s_Header);
-
-int i_EepromReadAnlogOutputHeader(unsigned short w_PCIBoardEepromAddress,
- char *pc_PCIChipInformation, unsigned short w_Address,
- struct str_AnalogOutputHeader *s_Header);
-
-int i_EepromReadAnlogInputHeader(unsigned short w_PCIBoardEepromAddress,
- char *pc_PCIChipInformation, unsigned short w_Address,
- struct str_AnalogInputHeader *s_Header);
-
- /******************************************/
- /* Eeprom Specific Functions */
- /******************************************/
-unsigned short w_EepromReadWord(unsigned short w_PCIBoardEepromAddress, char *pc_PCIChipInformation,
- unsigned short w_EepromStartAddress);
-void v_EepromWaitBusy(unsigned short w_PCIBoardEepromAddress);
-void v_EepromClock76(unsigned int dw_Address, unsigned int dw_RegisterValue);
-void v_EepromWaitBusy(unsigned short w_PCIBoardEepromAddress);
-void v_EepromSendCommand76(unsigned int dw_Address, unsigned int dw_EepromCommand,
- unsigned char b_DataLengthInBits);
-void v_EepromCs76Read(unsigned int dw_Address, unsigned short w_offset, unsigned short *pw_Value);
-
-/*
-+----------------------------------------------------------------------------+
-| Function Name : unsigned short w_EepromReadWord |
-| (unsigned short w_PCIBoardEepromAddress, |
-| char * pc_PCIChipInformation, |
-| unsigned short w_EepromStartAddress) |
-+----------------------------------------------------------------------------+
-| Task : Read from eepromn a word |
-+----------------------------------------------------------------------------+
-| Input Parameters : unsigned short w_PCIBoardEepromAddress : PCI eeprom address |
-| |
-| char *pc_PCIChipInformation : PCI Chip Type. |
-| |
-| unsigned short w_EepromStartAddress : Selected eeprom address |
-+----------------------------------------------------------------------------+
-| Output Parameters : - |
-+----------------------------------------------------------------------------+
-| Return Value : Read word value from eeprom |
-+----------------------------------------------------------------------------+
-*/
-
-unsigned short w_EepromReadWord(unsigned short w_PCIBoardEepromAddress, char *pc_PCIChipInformation,
- unsigned short w_EepromStartAddress)
+static void addi_eeprom_clk_93c76(unsigned long iobase, unsigned int val)
{
-
- unsigned char b_Counter = 0;
-
- unsigned char b_ReadByte = 0;
-
- unsigned char b_ReadLowByte = 0;
-
- unsigned char b_ReadHighByte = 0;
-
- unsigned char b_SelectedAddressLow = 0;
-
- unsigned char b_SelectedAddressHigh = 0;
-
- unsigned short w_ReadWord = 0;
-
- /**************************/
-
- /* Test the PCI chip type */
-
- /**************************/
-
- if ((!strcmp(pc_PCIChipInformation, "S5920")) ||
- (!strcmp(pc_PCIChipInformation, "S5933")))
- {
-
- for (b_Counter = 0; b_Counter < 2; b_Counter++)
- {
-
- b_SelectedAddressLow = (w_EepromStartAddress + b_Counter) % 256; /* Read the low 8 bit part */
-
- b_SelectedAddressHigh = (w_EepromStartAddress + b_Counter) / 256; /* Read the high 8 bit part */
-
- /************************************/
-
- /* Select the load low address mode */
-
- /************************************/
-
- outb(NVCMD_LOAD_LOW, w_PCIBoardEepromAddress + 0x3F);
-
- /****************/
-
- /* Wait on busy */
-
- /****************/
-
- v_EepromWaitBusy(w_PCIBoardEepromAddress);
-
- /************************/
-
- /* Load the low address */
-
- /************************/
-
- outb(b_SelectedAddressLow,
- w_PCIBoardEepromAddress + 0x3E);
-
- /****************/
-
- /* Wait on busy */
-
- /****************/
-
- v_EepromWaitBusy(w_PCIBoardEepromAddress);
-
- /*************************************/
-
- /* Select the load high address mode */
-
- /*************************************/
-
- outb(NVCMD_LOAD_HIGH, w_PCIBoardEepromAddress + 0x3F);
-
- /****************/
-
- /* Wait on busy */
-
- /****************/
-
- v_EepromWaitBusy(w_PCIBoardEepromAddress);
-
- /*************************/
-
- /* Load the high address */
-
- /*************************/
-
- outb(b_SelectedAddressHigh,
- w_PCIBoardEepromAddress + 0x3E);
-
- /****************/
-
- /* Wait on busy */
-
- /****************/
-
- v_EepromWaitBusy(w_PCIBoardEepromAddress);
-
- /************************/
-
- /* Select the READ mode */
-
- /************************/
-
- outb(NVCMD_BEGIN_READ, w_PCIBoardEepromAddress + 0x3F);
-
- /****************/
-
- /* Wait on busy */
-
- /****************/
-
- v_EepromWaitBusy(w_PCIBoardEepromAddress);
-
- /*****************************/
-
- /* Read data into the EEPROM */
-
- /*****************************/
-
- b_ReadByte = inb(w_PCIBoardEepromAddress + 0x3E);
-
- /****************/
-
- /* Wait on busy */
-
- /****************/
-
- v_EepromWaitBusy(w_PCIBoardEepromAddress);
-
- /*********************************/
-
- /* Select the upper address part */
-
- /*********************************/
-
- if (b_Counter == 0)
- {
-
- b_ReadLowByte = b_ReadByte;
-
- } /* if(b_Counter==0) */
-
- else
- {
-
- b_ReadHighByte = b_ReadByte;
-
- } /* if(b_Counter==0) */
-
- } /* for (b_Counter=0; b_Counter<2; b_Counter++) */
-
- w_ReadWord = (b_ReadLowByte | (((unsigned short) b_ReadHighByte) * 256));
-
- } /* end of if ((!strcmp(pc_PCIChipInformation, "S5920")) || (!strcmp(pc_PCIChipInformation, "S5933"))) */
-
- if (!strcmp(pc_PCIChipInformation, "93C76"))
- {
-
- /*************************************/
-
- /* Read 16 bit from the EEPROM 93C76 */
-
- /*************************************/
-
- v_EepromCs76Read(w_PCIBoardEepromAddress, w_EepromStartAddress,
- &w_ReadWord);
-
- }
-
- return w_ReadWord;
-
-}
-
-/*
-
-+----------------------------------------------------------------------------+
-
-| Function Name : void v_EepromWaitBusy |
-
-| (unsigned short w_PCIBoardEepromAddress) |
-
-+----------------------------------------------------------------------------+
-
-| Task : Wait the busy flag from PCI controller |
-
-+----------------------------------------------------------------------------+
-
-| Input Parameters : unsigned short w_PCIBoardEepromAddress : PCI eeprom base address |
-
-+----------------------------------------------------------------------------+
-
-| Output Parameters : - |
-
-+----------------------------------------------------------------------------+
-
-| Return Value : - |
-
-+----------------------------------------------------------------------------+
-
-*/
-
-void v_EepromWaitBusy(unsigned short w_PCIBoardEepromAddress)
-{
-
- unsigned char b_EepromBusy = 0;
-
- do
- {
-
- /*************/
-
- /* IMPORTANT */
-
- /*************/
-
- /************************************************************************/
-
- /* An error has been written in the AMCC 5933 book at the page B-13 */
-
- /* Ex: if you read a byte and look for the busy statusEEPROM=0x80 and */
-
- /* the operator register is AMCC_OP_REG_MCSR+3 */
-
- /* unsigned short read EEPROM=0x8000 andAMCC_OP_REG_MCSR+2 */
-
- /* unsigned int read EEPROM=0x80000000 and AMCC_OP_REG_MCSR */
-
- /************************************************************************/
-
- b_EepromBusy = inb(w_PCIBoardEepromAddress + 0x3F);
- b_EepromBusy = b_EepromBusy & 0x80;
-
- } while (b_EepromBusy == 0x80);
-
-}
-
-/*
-
-+---------------------------------------------------------------------------------+
-
-| Function Name : void v_EepromClock76(unsigned int dw_Address, |
-
-| unsigned int dw_RegisterValue) |
-
-+---------------------------------------------------------------------------------+
-
-| Task : This function sends the clocking sequence to the EEPROM. |
-
-+---------------------------------------------------------------------------------+
-
-| Input Parameters : unsigned int dw_Address : PCI eeprom base address |
-
-| unsigned int dw_RegisterValue : PCI eeprom register value to write.|
-
-+---------------------------------------------------------------------------------+
-
-| Output Parameters : - |
-
-+---------------------------------------------------------------------------------+
-
-| Return Value : - |
-
-+---------------------------------------------------------------------------------+
-
-*/
-
-void v_EepromClock76(unsigned int dw_Address, unsigned int dw_RegisterValue)
-{
-
- /************************/
-
- /* Set EEPROM clock Low */
-
- /************************/
-
- outl(dw_RegisterValue & 0x6, dw_Address);
-
- /***************/
-
- /* Wait 0.1 ms */
-
- /***************/
-
+ outl(val & ~EE93C76_CLK_BIT, iobase);
udelay(100);
- /*************************/
-
- /* Set EEPROM clock High */
-
- /*************************/
-
- outl(dw_RegisterValue | 0x1, dw_Address);
-
- /***************/
-
- /* Wait 0.1 ms */
-
- /***************/
-
+ outl(val | EE93C76_CLK_BIT, iobase);
udelay(100);
-
}
-/*
-
-+---------------------------------------------------------------------------------+
-
-| Function Name : void v_EepromSendCommand76(unsigned int dw_Address, |
-
-| unsigned int dw_EepromCommand, |
-
-| unsigned char b_DataLengthInBits) |
-
-+---------------------------------------------------------------------------------+
-
-| Task : This function sends a Command to the EEPROM 93C76. |
-
-+---------------------------------------------------------------------------------+
-
-| Input Parameters : unsigned int dw_Address : PCI eeprom base address |
-
-| unsigned int dw_EepromCommand : PCI eeprom command to write. |
-
-| unsigned char b_DataLengthInBits : PCI eeprom command data length. |
-
-+---------------------------------------------------------------------------------+
-
-| Output Parameters : - |
-
-+---------------------------------------------------------------------------------+
-
-| Return Value : - |
-
-+---------------------------------------------------------------------------------+
-
-*/
-
-void v_EepromSendCommand76(unsigned int dw_Address, unsigned int dw_EepromCommand,
- unsigned char b_DataLengthInBits)
+static unsigned int addi_eeprom_cmd_93c76(unsigned long iobase,
+ unsigned int cmd,
+ unsigned char len)
{
-
- char c_BitPos = 0;
-
- unsigned int dw_RegisterValue = 0;
-
- /*****************************/
-
- /* Enable EEPROM Chip Select */
-
- /*****************************/
-
- dw_RegisterValue = 0x2;
-
- /********************************************************************/
+ unsigned int val = EE93C76_CS_BIT;
+ int i;
/* Toggle EEPROM's Chip select to get it out of Shift Register Mode */
-
- /********************************************************************/
-
- outl(dw_RegisterValue, dw_Address);
-
- /***************/
-
- /* Wait 0.1 ms */
-
- /***************/
-
+ outl(val, iobase);
udelay(100);
- /*******************************************/
-
/* Send EEPROM command - one bit at a time */
-
- /*******************************************/
-
- for (c_BitPos = (b_DataLengthInBits - 1); c_BitPos >= 0; c_BitPos--)
- {
-
- /**********************************/
-
- /* Check if current bit is 0 or 1 */
-
- /**********************************/
-
- if (dw_EepromCommand & (1 << c_BitPos))
- {
-
- /***********/
-
- /* Write 1 */
-
- /***********/
-
- dw_RegisterValue = dw_RegisterValue | 0x4;
-
- }
-
+ for (i = (len - 1); i >= 0; i--) {
+ if (cmd & (1 << i))
+ val |= EE93C76_DOUT_BIT;
else
- {
-
- /***********/
-
- /* Write 0 */
-
- /***********/
-
- dw_RegisterValue = dw_RegisterValue & 0x3;
-
- }
-
- /*********************/
+ val &= ~EE93C76_DOUT_BIT;
/* Write the command */
-
- /*********************/
-
- outl(dw_RegisterValue, dw_Address);
-
- /***************/
-
- /* Wait 0.1 ms */
-
- /***************/
-
+ outl(val, iobase);
udelay(100);
- /****************************/
-
- /* Trigger the EEPROM clock */
-
- /****************************/
-
- v_EepromClock76(dw_Address, dw_RegisterValue);
-
+ addi_eeprom_clk_93c76(iobase, val);
}
-
+ return val;
}
-/*
-
-+---------------------------------------------------------------------------------+
-
-| Function Name : void v_EepromCs76Read(unsigned int dw_Address, |
-
-| unsigned short w_offset, |
-
-| unsigned short * pw_Value) |
-
-+---------------------------------------------------------------------------------+
-
-| Task : This function read a value from the EEPROM 93C76. |
-
-+---------------------------------------------------------------------------------+
-
-| Input Parameters : unsigned int dw_Address : PCI eeprom base address |
-
-| unsigned short w_offset : Offset of the address to read |
-
-| unsigned short * pw_Value : PCI eeprom 16 bit read value. |
-
-+---------------------------------------------------------------------------------+
-
-| Output Parameters : - |
-
-+---------------------------------------------------------------------------------+
-
-| Return Value : - |
-
-+---------------------------------------------------------------------------------+
-
-*/
-
-void v_EepromCs76Read(unsigned int dw_Address, unsigned short w_offset, unsigned short *pw_Value)
+static unsigned short addi_eeprom_readw_93c76(unsigned long iobase,
+ unsigned short addr)
{
-
- char c_BitPos = 0;
-
- unsigned int dw_RegisterValue = 0;
-
- unsigned int dw_RegisterValueRead = 0;
-
- /*************************************************/
+ unsigned short val = 0;
+ unsigned int cmd;
+ unsigned int tmp;
+ int i;
/* Send EEPROM read command and offset to EEPROM */
-
- /*************************************************/
-
- v_EepromSendCommand76(dw_Address, (EE_READ << 4) | (w_offset / 2),
- EE76_CMD_LEN);
-
- /*******************************/
-
- /* Get the last register value */
-
- /*******************************/
-
- dw_RegisterValue = (((w_offset / 2) & 0x1) << 2) | 0x2;
-
- /*****************************/
-
- /* Set the 16-bit value of 0 */
-
- /*****************************/
-
- *pw_Value = 0;
-
- /************************/
+ cmd = EE93C76_READ_CMD | (addr / 2);
+ cmd = addi_eeprom_cmd_93c76(iobase, cmd, EE93C76_CMD_LEN);
/* Get the 16-bit value */
+ for (i = 0; i < 16; i++) {
+ addi_eeprom_clk_93c76(iobase, cmd);
- /************************/
-
- for (c_BitPos = 0; c_BitPos < 16; c_BitPos++)
- {
-
- /****************************/
-
- /* Trigger the EEPROM clock */
-
- /****************************/
-
- v_EepromClock76(dw_Address, dw_RegisterValue);
-
- /**********************/
-
- /* Get the result bit */
-
- /**********************/
-
- dw_RegisterValueRead = inl(dw_Address);
-
- /***************/
-
- /* Wait 0.1 ms */
-
- /***************/
-
+ tmp = inl(iobase);
udelay(100);
- /***************************************/
-
- /* Get bit value and shift into result */
-
- /***************************************/
-
- if (dw_RegisterValueRead & 0x8)
- {
-
- /**********/
-
- /* Read 1 */
-
- /**********/
-
- *pw_Value = (*pw_Value << 1) | 0x1;
-
- }
-
- else
- {
-
- /**********/
-
- /* Read 0 */
-
- /**********/
-
- *pw_Value = (*pw_Value << 1);
-
- }
-
+ val <<= 1;
+ if (tmp & EE93C76_DIN_BIT)
+ val |= 0x1;
}
- /*************************/
-
- /* Clear all EEPROM bits */
-
- /*************************/
-
- dw_RegisterValue = 0x0;
-
- /********************************************************************/
-
/* Toggle EEPROM's Chip select to get it out of Shift Register Mode */
-
- /********************************************************************/
-
- outl(dw_RegisterValue, dw_Address);
-
- /***************/
-
- /* Wait 0.1 ms */
-
- /***************/
-
+ outl(0, iobase);
udelay(100);
+ return val;
}
- /******************************************/
- /* EEPROM HEADER READ FUNCTIONS */
- /******************************************/
-
-/*
-+----------------------------------------------------------------------------+
-| Function Name : int i_EepromReadMainHeader(unsigned short w_PCIBoardEepromAddress, |
-| char * pc_PCIChipInformation,struct comedi_device *dev) |
-+----------------------------------------------------------------------------+
-| Task : Read from eeprom Main Header |
-+----------------------------------------------------------------------------+
-| Input Parameters : unsigned short w_PCIBoardEepromAddress : PCI eeprom address |
-| |
-| char *pc_PCIChipInformation : PCI Chip Type. |
-| |
-| struct comedi_device *dev : comedi device structure |
-| pointer |
-+----------------------------------------------------------------------------+
-| Output Parameters : - |
-+----------------------------------------------------------------------------+
-| Return Value : 0 |
-+----------------------------------------------------------------------------+
-*/
-
-int i_EepromReadMainHeader(unsigned short w_PCIBoardEepromAddress,
- char *pc_PCIChipInformation, struct comedi_device *dev)
+static void addi_eeprom_nvram_wait(unsigned long iobase)
{
- unsigned short w_Temp, i, w_Count = 0;
- unsigned int ui_Temp;
- struct str_MainHeader s_MainHeader;
- struct str_DigitalInputHeader s_DigitalInputHeader;
- struct str_DigitalOutputHeader s_DigitalOutputHeader;
- /* struct str_TimerMainHeader s_TimerMainHeader,s_WatchdogMainHeader; */
- struct str_AnalogOutputHeader s_AnalogOutputHeader;
- struct str_AnalogInputHeader s_AnalogInputHeader;
+ unsigned char val;
- /* Read size */
- s_MainHeader.w_HeaderSize =
- w_EepromReadWord(w_PCIBoardEepromAddress, pc_PCIChipInformation,
- 0x100 + 8);
+ do {
+ val = inb(iobase + AMCC_OP_REG_MCSR_NVCMD);
+ } while (val & 0x80);
+}
- /* Read nbr of functionality */
- w_Temp = w_EepromReadWord(w_PCIBoardEepromAddress,
- pc_PCIChipInformation, 0x100 + 10);
- s_MainHeader.b_Nfunctions = (unsigned char) w_Temp & 0x00FF;
+static unsigned short addi_eeprom_readw_nvram(unsigned long iobase,
+ unsigned short addr)
+{
+ unsigned short val = 0;
+ unsigned char tmp;
+ unsigned char i;
- /* Read functionality details */
- for (i = 0; i < s_MainHeader.b_Nfunctions; i++) {
- /* Read Type */
- w_Temp = w_EepromReadWord(w_PCIBoardEepromAddress,
- pc_PCIChipInformation, 0x100 + 12 + w_Count);
- s_MainHeader.s_Functions[i].b_Type = (unsigned char) w_Temp & 0x3F;
- w_Count = w_Count + 2;
- /* Read Address */
- s_MainHeader.s_Functions[i].w_Address =
- w_EepromReadWord(w_PCIBoardEepromAddress,
- pc_PCIChipInformation, 0x100 + 12 + w_Count);
- w_Count = w_Count + 2;
+ for (i = 0; i < 2; i++) {
+ /* Load the low 8 bit address */
+ outb(NVCMD_LOAD_LOW, iobase + AMCC_OP_REG_MCSR_NVCMD);
+ addi_eeprom_nvram_wait(iobase);
+ outb((addr + i) & 0xff, iobase + AMCC_OP_REG_MCSR_NVDATA);
+ addi_eeprom_nvram_wait(iobase);
+
+ /* Load the high 8 bit address */
+ outb(NVCMD_LOAD_HIGH, iobase + AMCC_OP_REG_MCSR_NVCMD);
+ addi_eeprom_nvram_wait(iobase);
+ outb(((addr + i) >> 8) & 0xff,
+ iobase + AMCC_OP_REG_MCSR_NVDATA);
+ addi_eeprom_nvram_wait(iobase);
+
+ /* Read the eeprom data byte */
+ outb(NVCMD_BEGIN_READ, iobase + AMCC_OP_REG_MCSR_NVCMD);
+ addi_eeprom_nvram_wait(iobase);
+ tmp = inb(iobase + AMCC_OP_REG_MCSR_NVDATA);
+ addi_eeprom_nvram_wait(iobase);
+
+ if (i == 0)
+ val |= tmp;
+ else
+ val |= (tmp << 8);
}
- /* Display main header info */
- for (i = 0; i < s_MainHeader.b_Nfunctions; i++) {
+ return val;
+}
- switch (s_MainHeader.s_Functions[i].b_Type) {
+static unsigned short addi_eeprom_readw(unsigned long iobase,
+ char *type,
+ unsigned short addr)
+{
+ unsigned short val = 0;
+
+ /* Add the offset to the start of the user data */
+ addr += NVRAM_USER_DATA_START;
+
+ if (!strcmp(type, "S5920") || !strcmp(type, "S5933"))
+ val = addi_eeprom_readw_nvram(iobase, addr);
+
+ if (!strcmp(type, "93C76"))
+ val = addi_eeprom_readw_93c76(iobase, addr);
+
+ return val;
+}
+
+static void addi_eeprom_read_di_info(struct comedi_device *dev,
+ unsigned long iobase,
+ unsigned short addr)
+{
+ const struct addi_board *this_board = comedi_board(dev);
+ struct addi_private *devpriv = dev->private;
+ char *type = this_board->pc_EepromChip;
+ unsigned short tmp;
+
+ /* Number of channels */
+ tmp = addi_eeprom_readw(iobase, type, addr + 6);
+ devpriv->s_EeParameters.i_NbrDiChannel = tmp;
+
+ /* Interruptible or not */
+ tmp = addi_eeprom_readw(iobase, type, addr + 8);
+ tmp = (tmp >> 7) & 0x01;
+
+ /* How many interruptible logic */
+ tmp = addi_eeprom_readw(iobase, type, addr + 10);
+}
+
+static void addi_eeprom_read_do_info(struct comedi_device *dev,
+ unsigned long iobase,
+ unsigned short addr)
+{
+ const struct addi_board *this_board = comedi_board(dev);
+ struct addi_private *devpriv = dev->private;
+ char *type = this_board->pc_EepromChip;
+ unsigned short tmp;
+
+ /* Number of channels */
+ tmp = addi_eeprom_readw(iobase, type, addr + 6);
+ devpriv->s_EeParameters.i_NbrDoChannel = tmp;
+
+ devpriv->s_EeParameters.i_DoMaxdata = 0xffffffff >> (32 - tmp);
+}
+
+static void addi_eeprom_read_timer_info(struct comedi_device *dev,
+ unsigned long iobase,
+ unsigned short addr)
+{
+ struct addi_private *devpriv = dev->private;
+#if 0
+ const struct addi_board *this_board = comedi_board(dev);
+ char *type = this_board->pc_EepromChip;
+ unsigned short offset = 0;
+ unsigned short ntimers;
+ unsigned short tmp;
+ int i;
+
+ /* Number of Timers */
+ ntimers = addi_eeprom_readw(iobase, type, addr + 6);
+
+ /* Read header size */
+ for (i = 0; i < ntimers; i++) {
+ unsigned short size;
+ unsigned short res;
+ unsigned short mode;
+ unsigned short min_timing;
+ unsigned short timebase;
+
+ size = addi_eeprom_readw(iobase, type, addr + 8 + offset + 0);
+
+ /* Resolution / Mode */
+ tmp = addi_eeprom_readw(iobase, type, addr + 8 + offset + 2);
+ res = (tmp >> 10) & 0x3f;
+ mode = (tmp >> 4) & 0x3f;
+
+ /* MinTiming / Timebase */
+ tmp = addi_eeprom_readw(iobase, type, addr + 8 + offset + 4);
+ min_timing = (tmp >> 6) & 0x3ff;
+ Timebase = tmp & 0x3f;
+
+ offset += size;
+ }
+#endif
+ /* Timer subdevice present */
+ devpriv->s_EeParameters.i_Timer = 1;
+}
+
+static void addi_eeprom_read_ao_info(struct comedi_device *dev,
+ unsigned long iobase,
+ unsigned short addr)
+{
+ const struct addi_board *this_board = comedi_board(dev);
+ struct addi_private *devpriv = dev->private;
+ char *type = this_board->pc_EepromChip;
+ unsigned short tmp;
+
+ /* No of channels for 1st hard component */
+ tmp = addi_eeprom_readw(iobase, type, addr + 10);
+ devpriv->s_EeParameters.i_NbrAoChannel = (tmp >> 4) & 0x3ff;
+
+ /* Resolution for 1st hard component */
+ tmp = addi_eeprom_readw(iobase, type, addr + 16);
+ tmp = (tmp >> 8) & 0xff;
+ devpriv->s_EeParameters.i_AoMaxdata = 0xfff >> (16 - tmp);
+}
+
+static void addi_eeprom_read_ai_info(struct comedi_device *dev,
+ unsigned long iobase,
+ unsigned short addr)
+{
+ const struct addi_board *this_board = comedi_board(dev);
+ struct addi_private *devpriv = dev->private;
+ char *type = this_board->pc_EepromChip;
+ unsigned short offset;
+ unsigned short tmp;
+
+ /* No of channels for 1st hard component */
+ tmp = addi_eeprom_readw(iobase, type, addr + 10);
+ devpriv->s_EeParameters.i_NbrAiChannel = (tmp >> 4) & 0x3ff;
+ if (!strcmp(this_board->pc_DriverName, "apci3200"))
+ devpriv->s_EeParameters.i_NbrAiChannel *= 4;
+
+ tmp = addi_eeprom_readw(iobase, type, addr + 16);
+ devpriv->s_EeParameters.ui_MinAcquisitiontimeNs = tmp * 1000;
+
+ tmp = addi_eeprom_readw(iobase, type, addr + 30);
+ devpriv->s_EeParameters.ui_MinDelaytimeNs = tmp * 1000;
+
+ tmp = addi_eeprom_readw(iobase, type, addr + 20);
+ devpriv->s_EeParameters.i_Dma = (tmp >> 13) & 0x01;
+
+ tmp = addi_eeprom_readw(iobase, type, addr + 72) & 0xff;
+ if (tmp) { /* > 0 */
+ /* offset of first analog input single header */
+ offset = 74 + (2 * tmp) + (10 * (1 + (tmp / 16)));
+ } else { /* = 0 */
+ offset = 74;
+ }
+
+ /* Resolution */
+ tmp = addi_eeprom_readw(iobase, type, addr + offset + 2) & 0x1f;
+ devpriv->s_EeParameters.i_AiMaxdata = 0xffff >> (16 - tmp);
+}
+
+static void addi_eeprom_read_info(struct comedi_device *dev,
+ unsigned long iobase)
+{
+ const struct addi_board *this_board = comedi_board(dev);
+ char *type = this_board->pc_EepromChip;
+ unsigned short size;
+ unsigned char nfuncs;
+ int i;
+
+ size = addi_eeprom_readw(iobase, type, 8);
+ nfuncs = addi_eeprom_readw(iobase, type, 10) & 0xff;
+
+ /* Read functionality details */
+ for (i = 0; i < nfuncs; i++) {
+ unsigned short offset = i * 4;
+ unsigned short addr;
+ unsigned char func;
+
+ func = addi_eeprom_readw(iobase, type, 12 + offset) & 0x3f;
+ addr = addi_eeprom_readw(iobase, type, 14 + offset);
+
+ switch (func) {
case EEPROM_DIGITALINPUT:
- i_EepromReadDigitalInputHeader(w_PCIBoardEepromAddress,
- pc_PCIChipInformation,
- s_MainHeader.s_Functions[i].w_Address,
- &s_DigitalInputHeader);
- devpriv->s_EeParameters.i_NbrDiChannel =
- s_DigitalInputHeader.w_Nchannel;
+ addi_eeprom_read_di_info(dev, iobase, addr);
break;
case EEPROM_DIGITALOUTPUT:
- i_EepromReadDigitalOutputHeader(w_PCIBoardEepromAddress,
- pc_PCIChipInformation,
- s_MainHeader.s_Functions[i].w_Address,
- &s_DigitalOutputHeader);
- devpriv->s_EeParameters.i_NbrDoChannel =
- s_DigitalOutputHeader.w_Nchannel;
- ui_Temp = 0xffffffff;
- devpriv->s_EeParameters.i_DoMaxdata =
- ui_Temp >> (32 -
- devpriv->s_EeParameters.i_NbrDoChannel);
+ addi_eeprom_read_do_info(dev, iobase, addr);
break;
case EEPROM_ANALOGINPUT:
- i_EepromReadAnlogInputHeader(w_PCIBoardEepromAddress,
- pc_PCIChipInformation,
- s_MainHeader.s_Functions[i].w_Address,
- &s_AnalogInputHeader);
- if (!(strcmp(this_board->pc_DriverName, "apci3200")))
- devpriv->s_EeParameters.i_NbrAiChannel =
- s_AnalogInputHeader.w_Nchannel * 4;
- else
- devpriv->s_EeParameters.i_NbrAiChannel =
- s_AnalogInputHeader.w_Nchannel;
- devpriv->s_EeParameters.i_Dma =
- s_AnalogInputHeader.b_HasDma;
- devpriv->s_EeParameters.ui_MinAcquisitiontimeNs =
- (unsigned int) s_AnalogInputHeader.w_MinConvertTiming *
- 1000;
- devpriv->s_EeParameters.ui_MinDelaytimeNs =
- (unsigned int) s_AnalogInputHeader.w_MinDelayTiming *
- 1000;
- ui_Temp = 0xffff;
- devpriv->s_EeParameters.i_AiMaxdata =
- ui_Temp >> (16 -
- s_AnalogInputHeader.b_Resolution);
+ addi_eeprom_read_ai_info(dev, iobase, addr);
break;
case EEPROM_ANALOGOUTPUT:
- i_EepromReadAnlogOutputHeader(w_PCIBoardEepromAddress,
- pc_PCIChipInformation,
- s_MainHeader.s_Functions[i].w_Address,
- &s_AnalogOutputHeader);
- devpriv->s_EeParameters.i_NbrAoChannel =
- s_AnalogOutputHeader.w_Nchannel;
- ui_Temp = 0xffff;
- devpriv->s_EeParameters.i_AoMaxdata =
- ui_Temp >> (16 -
- s_AnalogOutputHeader.b_Resolution);
+ addi_eeprom_read_ao_info(dev, iobase, addr);
break;
case EEPROM_TIMER:
- /* Timer subdevice present */
- devpriv->s_EeParameters.i_Timer = 1;
- break;
-
case EEPROM_WATCHDOG:
- /* Timer subdevice present */
- devpriv->s_EeParameters.i_Timer = 1;
- break;
-
case EEPROM_TIMER_WATCHDOG_COUNTER:
- /* Timer subdevice present */
- devpriv->s_EeParameters.i_Timer = 1;
+ addi_eeprom_read_timer_info(dev, iobase, addr);
break;
}
}
-
- return 0;
-}
-
-/*
-+----------------------------------------------------------------------------+
-| Function Name : int i_EepromReadDigitalInputHeader(unsigned short |
-| w_PCIBoardEepromAddress,char *pc_PCIChipInformation, |
-| unsigned short w_Address,struct str_DigitalInputHeader *s_Header) |
-| |
-+----------------------------------------------------------------------------+
-| Task : Read Digital Input Header |
-+----------------------------------------------------------------------------+
-| Input Parameters : unsigned short w_PCIBoardEepromAddress : PCI eeprom address |
-| |
-| char *pc_PCIChipInformation : PCI Chip Type. |
-| |
-| struct str_DigitalInputHeader *s_Header: Digita Input Header |
-| Pointer |
-+----------------------------------------------------------------------------+
-| Output Parameters : - |
-+----------------------------------------------------------------------------+
-| Return Value : 0 |
-+----------------------------------------------------------------------------+
-*/
-int i_EepromReadDigitalInputHeader(unsigned short w_PCIBoardEepromAddress,
- char *pc_PCIChipInformation, unsigned short w_Address,
- struct str_DigitalInputHeader *s_Header)
-{
- unsigned short w_Temp;
-
- /* read nbr of channels */
- s_Header->w_Nchannel =
- w_EepromReadWord(w_PCIBoardEepromAddress, pc_PCIChipInformation,
- 0x100 + w_Address + 6);
-
- /* interruptible or not */
- w_Temp = w_EepromReadWord(w_PCIBoardEepromAddress,
- pc_PCIChipInformation, 0x100 + w_Address + 8);
- s_Header->b_Interruptible = (unsigned char) (w_Temp >> 7) & 0x01;
-
-/* How many interruptible logic */
- s_Header->w_NinterruptLogic =
- w_EepromReadWord(w_PCIBoardEepromAddress, pc_PCIChipInformation,
- 0x100 + w_Address + 10);
-
- return 0;
-}
-
-/*
-+----------------------------------------------------------------------------+
-| Function Name : int i_EepromReadDigitalOutputHeader(unsigned short |
-| w_PCIBoardEepromAddress,char *pc_PCIChipInformation, |
-| unsigned short w_Address,struct str_DigitalOutputHeader *s_Header) |
-| |
-+----------------------------------------------------------------------------+
-| Task : Read Digital Output Header |
-+----------------------------------------------------------------------------+
-| Input Parameters : unsigned short w_PCIBoardEepromAddress : PCI eeprom address |
-| |
-| char *pc_PCIChipInformation : PCI Chip Type. |
-| |
-| struct str_DigitalOutputHeader *s_Header: Digital Output Header|
-| Pointer |
-+----------------------------------------------------------------------------+
-| Output Parameters : - |
-+----------------------------------------------------------------------------+
-| Return Value : 0 |
-+----------------------------------------------------------------------------+
-*/
-int i_EepromReadDigitalOutputHeader(unsigned short w_PCIBoardEepromAddress,
- char *pc_PCIChipInformation, unsigned short w_Address,
- struct str_DigitalOutputHeader *s_Header)
-{
-/* Read Nbr channels */
- s_Header->w_Nchannel =
- w_EepromReadWord(w_PCIBoardEepromAddress, pc_PCIChipInformation,
- 0x100 + w_Address + 6);
- return 0;
-}
-
-/*
-+----------------------------------------------------------------------------+
-| Function Name : int i_EepromReadTimerHeader(unsigned short w_PCIBoardEepromAddress, |
-| char *pc_PCIChipInformation,WORD w_Address, |
-| struct str_TimerMainHeader *s_Header) |
-+----------------------------------------------------------------------------+
-| Task : Read Timer or Watchdog Header |
-+----------------------------------------------------------------------------+
-| Input Parameters : unsigned short w_PCIBoardEepromAddress : PCI eeprom address |
-| |
-| char *pc_PCIChipInformation : PCI Chip Type. |
-| |
-| struct str_TimerMainHeader *s_Header: Timer Header |
-| Pointer |
-+----------------------------------------------------------------------------+
-| Output Parameters : - |
-+----------------------------------------------------------------------------+
-| Return Value : 0 |
-+----------------------------------------------------------------------------+
-*/
-int i_EepromReadTimerHeader(unsigned short w_PCIBoardEepromAddress,
- char *pc_PCIChipInformation, unsigned short w_Address,
- struct str_TimerMainHeader *s_Header)
-{
-
- unsigned short i, w_Size = 0, w_Temp;
-
-/* Read No of Timer */
- s_Header->w_Ntimer =
- w_EepromReadWord(w_PCIBoardEepromAddress, pc_PCIChipInformation,
- 0x100 + w_Address + 6);
-/* Read header size */
-
- for (i = 0; i < s_Header->w_Ntimer; i++) {
- s_Header->s_TimerDetails[i].w_HeaderSize =
- w_EepromReadWord(w_PCIBoardEepromAddress,
- pc_PCIChipInformation,
- 0x100 + w_Address + 8 + w_Size + 0);
- w_Temp = w_EepromReadWord(w_PCIBoardEepromAddress,
- pc_PCIChipInformation,
- 0x100 + w_Address + 8 + w_Size + 2);
-
- /* Read Resolution */
- s_Header->s_TimerDetails[i].b_Resolution =
- (unsigned char) (w_Temp >> 10) & 0x3F;
-
- /* Read Mode */
- s_Header->s_TimerDetails[i].b_Mode =
- (unsigned char) (w_Temp >> 4) & 0x3F;
-
- w_Temp = w_EepromReadWord(w_PCIBoardEepromAddress,
- pc_PCIChipInformation,
- 0x100 + w_Address + 8 + w_Size + 4);
-
- /* Read MinTiming */
- s_Header->s_TimerDetails[i].w_MinTiming = (w_Temp >> 6) & 0x3FF;
-
- /* Read Timebase */
- s_Header->s_TimerDetails[i].b_TimeBase = (unsigned char) (w_Temp) & 0x3F;
- w_Size += s_Header->s_TimerDetails[i].w_HeaderSize;
- }
-
- return 0;
-}
-
-/*
-+----------------------------------------------------------------------------+
-| Function Name : int i_EepromReadAnlogOutputHeader(unsigned short |
-| w_PCIBoardEepromAddress,char *pc_PCIChipInformation, |
-| unsigned short w_Address,str_AnalogOutputHeader *s_Header) |
-+----------------------------------------------------------------------------+
-| Task : Read Nalog Output Header |
-+----------------------------------------------------------------------------+
-| Input Parameters : unsigned short w_PCIBoardEepromAddress : PCI eeprom address |
-| |
-| char *pc_PCIChipInformation : PCI Chip Type. |
-| |
-| str_AnalogOutputHeader *s_Header:Anlog Output Header |
-| Pointer |
-+----------------------------------------------------------------------------+
-| Output Parameters : - |
-+----------------------------------------------------------------------------+
-| Return Value : 0 |
-+----------------------------------------------------------------------------+
-*/
-
-int i_EepromReadAnlogOutputHeader(unsigned short w_PCIBoardEepromAddress,
- char *pc_PCIChipInformation, unsigned short w_Address,
- struct str_AnalogOutputHeader *s_Header)
-{
- unsigned short w_Temp;
- /* No of channels for 1st hard component */
- w_Temp = w_EepromReadWord(w_PCIBoardEepromAddress,
- pc_PCIChipInformation, 0x100 + w_Address + 10);
- s_Header->w_Nchannel = (w_Temp >> 4) & 0x03FF;
- /* Resolution for 1st hard component */
- w_Temp = w_EepromReadWord(w_PCIBoardEepromAddress,
- pc_PCIChipInformation, 0x100 + w_Address + 16);
- s_Header->b_Resolution = (unsigned char) (w_Temp >> 8) & 0xFF;
- return 0;
-}
-
-/*
-+----------------------------------------------------------------------------+
-| Function Name : int i_EepromReadAnlogInputHeader(unsigned short |
-| w_PCIBoardEepromAddress,char *pc_PCIChipInformation, |
-| unsigned short w_Address,struct str_AnalogInputHeader *s_Header) |
-+----------------------------------------------------------------------------+
-| Task : Read Nalog Output Header |
-+----------------------------------------------------------------------------+
-| Input Parameters : unsigned short w_PCIBoardEepromAddress : PCI eeprom address |
-| |
-| char *pc_PCIChipInformation : PCI Chip Type. |
-| |
-| struct str_AnalogInputHeader *s_Header:Anlog Input Header |
-| Pointer |
-+----------------------------------------------------------------------------+
-| Output Parameters : - |
-+----------------------------------------------------------------------------+
-| Return Value : 0 |
-+----------------------------------------------------------------------------+
-*/
-
-/* Reads only for ONE hardware component */
-int i_EepromReadAnlogInputHeader(unsigned short w_PCIBoardEepromAddress,
- char *pc_PCIChipInformation, unsigned short w_Address,
- struct str_AnalogInputHeader *s_Header)
-{
- unsigned short w_Temp, w_Offset;
- w_Temp = w_EepromReadWord(w_PCIBoardEepromAddress,
- pc_PCIChipInformation, 0x100 + w_Address + 10);
- s_Header->w_Nchannel = (w_Temp >> 4) & 0x03FF;
- s_Header->w_MinConvertTiming =
- w_EepromReadWord(w_PCIBoardEepromAddress, pc_PCIChipInformation,
- 0x100 + w_Address + 16);
- s_Header->w_MinDelayTiming =
- w_EepromReadWord(w_PCIBoardEepromAddress, pc_PCIChipInformation,
- 0x100 + w_Address + 30);
- w_Temp = w_EepromReadWord(w_PCIBoardEepromAddress,
- pc_PCIChipInformation, 0x100 + w_Address + 20);
- s_Header->b_HasDma = (w_Temp >> 13) & 0x01; /* whether dma present or not */
-
- w_Temp = w_EepromReadWord(w_PCIBoardEepromAddress, pc_PCIChipInformation, 0x100 + w_Address + 72); /* reading Y */
- w_Temp = w_Temp & 0x00FF;
- if (w_Temp) /* Y>0 */
- {
- w_Offset = 74 + (2 * w_Temp) + (10 * (1 + (w_Temp / 16))); /* offset of first analog input single header */
- w_Offset = w_Offset + 2; /* resolution */
- } else /* Y=0 */
- {
- w_Offset = 74;
- w_Offset = w_Offset + 2; /* resolution */
- }
-
-/* read Resolution */
- w_Temp = w_EepromReadWord(w_PCIBoardEepromAddress,
- pc_PCIChipInformation, 0x100 + w_Address + w_Offset);
- s_Header->b_Resolution = w_Temp & 0x001F; /* last 5 bits */
-
- return 0;
}
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_APCI1710.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_APCI1710.c
index f9a8937..b05f850 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_APCI1710.c
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_APCI1710.c
@@ -44,7 +44,35 @@
| | | |
+----------+-----------+------------------------------------------------+
*/
-#include "hwdrv_APCI1710.h"
+
+#define COMEDI_SUBD_TTLIO 11 /* Digital Input Output But TTL */
+#define COMEDI_SUBD_PWM 12 /* Pulse width Measurement */
+#define COMEDI_SUBD_SSI 13 /* Synchronous serial interface */
+#define COMEDI_SUBD_TOR 14 /* Tor counter */
+#define COMEDI_SUBD_CHRONO 15 /* Chrono meter */
+#define COMEDI_SUBD_PULSEENCODER 16 /* Pulse Encoder INP CPT */
+#define COMEDI_SUBD_INCREMENTALCOUNTER 17 /* Incremental Counter */
+
+#define APCI1710_BOARD_NAME "apci1710"
+#define APCI1710_BOARD_DEVICE_ID 0x818F
+#define APCI1710_ADDRESS_RANGE 256
+#define APCI1710_CONFIG_ADDRESS_RANGE 8
+#define APCI1710_INCREMENTAL_COUNTER 0x53430000UL
+#define APCI1710_SSI_COUNTER 0x53490000UL
+#define APCI1710_TTL_IO 0x544C0000UL
+#define APCI1710_DIGITAL_IO 0x44490000UL
+#define APCI1710_82X54_TIMER 0x49430000UL
+#define APCI1710_CHRONOMETER 0x43480000UL
+#define APCI1710_PULSE_ENCODER 0x495A0000UL
+#define APCI1710_TOR_COUNTER 0x544F0000UL
+#define APCI1710_PWM 0x50570000UL
+#define APCI1710_ETM 0x45540000UL
+#define APCI1710_CDA 0x43440000UL
+#define APCI1710_DISABLE 0
+#define APCI1710_ENABLE 1
+#define APCI1710_SYNCHRONOUS_MODE 1
+#define APCI1710_ASYNCHRONOUS_MODE 0
+
#include "APCI1710_Inp_cpt.c"
#include "APCI1710_Ssi.c"
@@ -56,7 +84,34 @@
#include "APCI1710_Pwm.c"
#include "APCI1710_INCCPT.c"
-void i_ADDI_AttachPCI1710(struct comedi_device *dev)
+static const struct comedi_lrange range_apci1710_ttl = {
+ 4, {
+ BIP_RANGE(10),
+ BIP_RANGE(5),
+ BIP_RANGE(2),
+ BIP_RANGE(1)
+ }
+};
+
+static const struct comedi_lrange range_apci1710_ssi = {
+ 4, {
+ BIP_RANGE(10),
+ BIP_RANGE(5),
+ BIP_RANGE(2),
+ BIP_RANGE(1)
+ }
+};
+
+static const struct comedi_lrange range_apci1710_inccpt = {
+ 4, {
+ BIP_RANGE(10),
+ BIP_RANGE(5),
+ BIP_RANGE(2),
+ BIP_RANGE(1)
+ }
+};
+
+static void i_ADDI_AttachPCI1710(struct comedi_device *dev)
{
struct comedi_subdevice *s;
int ret = 0;
@@ -195,12 +250,9 @@
s->insn_bits = i_APCI1710_InsnBitsINCCPT;
}
-int i_APCI1710_Reset(struct comedi_device *dev);
-void v_APCI1710_Interrupt(int irq, void *d);
-/* for 1710 */
-
-int i_APCI1710_Reset(struct comedi_device *dev)
+static int i_APCI1710_Reset(struct comedi_device *dev)
{
+ struct addi_private *devpriv = dev->private;
int ret;
unsigned int dw_Dummy;
@@ -247,9 +299,10 @@
+----------------------------------------------------------------------------+
*/
-void v_APCI1710_Interrupt(int irq, void *d)
+static void v_APCI1710_Interrupt(int irq, void *d)
{
struct comedi_device *dev = d;
+ struct addi_private *devpriv = dev->private;
unsigned char b_ModuleCpt = 0;
unsigned char b_InterruptFlag = 0;
unsigned char b_PWMCpt = 0;
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_APCI1710.h b/drivers/staging/comedi/drivers/addi-data/hwdrv_APCI1710.h
deleted file mode 100644
index 89c99eb..0000000
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_APCI1710.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module.
- *
- * ADDI-DATA GmbH
- * Dieselstrasse 3
- * D-77833 Ottersweier
- * Tel: +19(0)7223/9493-0
- * Fax: +49(0)7223/9493-92
- * http://www.addi-data.com
- * info@addi-data.com
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 of the License, or (at your option)
- * any later version.
- */
-
-#define COMEDI_SUBD_TTLIO 11 /* Digital Input Output But TTL */
-#define COMEDI_SUBD_PWM 12 /* Pulse width Measurement */
-#define COMEDI_SUBD_SSI 13 /* Synchronous serial interface */
-#define COMEDI_SUBD_TOR 14 /* Tor counter */
-#define COMEDI_SUBD_CHRONO 15 /* Chrono meter */
-#define COMEDI_SUBD_PULSEENCODER 16 /* Pulse Encoder INP CPT */
-#define COMEDI_SUBD_INCREMENTALCOUNTER 17 /* Incremental Counter */
-
-#define APCI1710_BOARD_NAME "apci1710"
-#define APCI1710_BOARD_VENDOR_ID 0x10E8
-#define APCI1710_BOARD_DEVICE_ID 0x818F
-#define APCI1710_ADDRESS_RANGE 256
-#define APCI1710_CONFIG_ADDRESS_RANGE 8
-#define APCI1710_INCREMENTAL_COUNTER 0x53430000UL
-#define APCI1710_SSI_COUNTER 0x53490000UL
-#define APCI1710_TTL_IO 0x544C0000UL
-#define APCI1710_DIGITAL_IO 0x44490000UL
-#define APCI1710_82X54_TIMER 0x49430000UL
-#define APCI1710_CHRONOMETER 0x43480000UL
-#define APCI1710_PULSE_ENCODER 0x495A0000UL
-#define APCI1710_TOR_COUNTER 0x544F0000UL
-#define APCI1710_PWM 0x50570000UL
-#define APCI1710_ETM 0x45540000UL
-#define APCI1710_CDA 0x43440000UL
-#define APCI1710_DISABLE 0
-#define APCI1710_ENABLE 1
-#define APCI1710_SYNCHRONOUS_MODE 1
-#define APCI1710_ASYNCHRONOUS_MODE 0
-
-/* MODULE INFO STRUCTURE */
-
-static const struct comedi_lrange range_apci1710_ttl = { 4, {
- BIP_RANGE(10),
- BIP_RANGE(5),
- BIP_RANGE(2),
- BIP_RANGE(1)
- }
-};
-
-static const struct comedi_lrange range_apci1710_ssi = { 4, {
- BIP_RANGE(10),
- BIP_RANGE(5),
- BIP_RANGE(2),
- BIP_RANGE(1)
- }
-};
-
-static const struct comedi_lrange range_apci1710_inccpt = { 4, {
- BIP_RANGE(10),
- BIP_RANGE(5),
- BIP_RANGE(2),
- BIP_RANGE(1)
- }
-};
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci035.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci035.c
index 5997b2f..3d66e48 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci035.c
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci035.c
@@ -46,12 +46,70 @@
+----------+-----------+------------------------------------------------+
*/
-/*
-+----------------------------------------------------------------------------+
-| Included files |
-+----------------------------------------------------------------------------+
-*/
-#include "hwdrv_apci035.h"
+/* Card Specific information */
+#define APCI035_ADDRESS_RANGE 255
+
+/* Timer / Watchdog Related Defines */
+#define APCI035_TCW_SYNC_ENABLEDISABLE 0
+#define APCI035_TCW_RELOAD_VALUE 4
+#define APCI035_TCW_TIMEBASE 8
+#define APCI035_TCW_PROG 12
+#define APCI035_TCW_TRIG_STATUS 16
+#define APCI035_TCW_IRQ 20
+#define APCI035_TCW_WARN_TIMEVAL 24
+#define APCI035_TCW_WARN_TIMEBASE 28
+
+#define ADDIDATA_TIMER 0
+/* #define ADDIDATA_WATCHDOG 1 */
+
+#define APCI035_TW1 0
+#define APCI035_TW2 32
+#define APCI035_TW3 64
+#define APCI035_TW4 96
+
+#define APCI035_AI_OFFSET 0
+#define APCI035_TEMP 128
+#define APCI035_ALR_SEQ 4
+#define APCI035_START_STOP_INDEX 8
+#define APCI035_ALR_START_STOP 12
+#define APCI035_ALR_IRQ 16
+#define APCI035_EOS 20
+#define APCI035_CHAN_NO 24
+#define APCI035_CHAN_VAL 28
+#define APCI035_CONV_TIME_TIME_BASE 36
+#define APCI035_RELOAD_CONV_TIME_VAL 32
+#define APCI035_DELAY_TIME_TIME_BASE 44
+#define APCI035_RELOAD_DELAY_TIME_VAL 40
+#define ENABLE_EXT_TRIG 1
+#define ENABLE_EXT_GATE 2
+#define ENABLE_EXT_TRIG_GATE 3
+
+#define ANALOG_INPUT 0
+#define TEMPERATURE 1
+#define RESISTANCE 2
+
+#define ADDIDATA_GREATER_THAN_TEST 0
+#define ADDIDATA_LESS_THAN_TEST 1
+
+#define APCI035_MAXVOLT 2.5
+
+#define ADDIDATA_UNIPOLAR 1
+#define ADDIDATA_BIPOLAR 2
+
+/* ANALOG INPUT RANGE */
+static struct comedi_lrange range_apci035_ai = {
+ 8, {
+ BIP_RANGE(10),
+ BIP_RANGE(5),
+ BIP_RANGE(2),
+ BIP_RANGE(1),
+ UNI_RANGE(10),
+ UNI_RANGE(5),
+ UNI_RANGE(2),
+ UNI_RANGE(1)
+ }
+};
+
static int i_WatchdogNbr = 0;
static int i_Temp = 0;
static int i_Flag = 1;
@@ -109,12 +167,16 @@
| |
+----------------------------------------------------------------------------+
*/
-int i_APCI035_ConfigTimerWatchdog(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data)
+static int i_APCI035_ConfigTimerWatchdog(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
{
+ struct addi_private *devpriv = dev->private;
unsigned int ui_Status = 0;
unsigned int ui_Command = 0;
unsigned int ui_Mode = 0;
+
i_Temp = 0;
devpriv->tsk_Current = current;
devpriv->b_TimerSelectMode = data[0];
@@ -278,11 +340,15 @@
| |
+----------------------------------------------------------------------------+
*/
-int i_APCI035_StartStopWriteTimerWatchdog(struct comedi_device *dev,
- struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
+static int i_APCI035_StartStopWriteTimerWatchdog(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
{
+ struct addi_private *devpriv = dev->private;
unsigned int ui_Command = 0;
int i_Count = 0;
+
if (data[0] == 1) {
ui_Command =
inl(devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 12);
@@ -393,10 +459,14 @@
| |
+----------------------------------------------------------------------------+
*/
-int i_APCI035_ReadTimerWatchdog(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data)
+static int i_APCI035_ReadTimerWatchdog(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
{
+ struct addi_private *devpriv = dev->private;
unsigned int ui_Status = 0; /* Status register */
+
i_WatchdogNbr = insn->unused[0];
/******************/
@@ -453,9 +523,13 @@
| |
+----------------------------------------------------------------------------+
*/
-int i_APCI035_ConfigAnalogInput(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data)
+static int i_APCI035_ConfigAnalogInput(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
{
+ struct addi_private *devpriv = dev->private;
+
devpriv->tsk_Current = current;
outl(0x200 | 0, devpriv->iobase + 128 + 0x4);
outl(0, devpriv->iobase + 128 + 0);
@@ -490,10 +564,14 @@
| |
+----------------------------------------------------------------------------+
*/
-int i_APCI035_ReadAnalogInput(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data)
+static int i_APCI035_ReadAnalogInput(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
{
+ struct addi_private *devpriv = dev->private;
unsigned int ui_CommandRegister = 0;
+
/******************/
/* Set the start */
/******************/
@@ -525,9 +603,11 @@
| |
+----------------------------------------------------------------------------+
*/
-int i_APCI035_Reset(struct comedi_device *dev)
+static int i_APCI035_Reset(struct comedi_device *dev)
{
+ struct addi_private *devpriv = dev->private;
int i_Count = 0;
+
for (i_Count = 1; i_Count <= 4; i_Count++) {
i_WatchdogNbr = i_Count;
outl(0x0, devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 0); /* stop all timers */
@@ -557,11 +637,13 @@
static void v_APCI035_Interrupt(int irq, void *d)
{
struct comedi_device *dev = d;
+ struct addi_private *devpriv = dev->private;
unsigned int ui_StatusRegister1 = 0;
unsigned int ui_StatusRegister2 = 0;
unsigned int ui_ReadCommand = 0;
unsigned int ui_ChannelNumber = 0;
unsigned int ui_DigitalTemperature = 0;
+
if (i_Temp == 1) {
i_WatchdogNbr = i_Flag;
i_Flag = i_Flag + 1;
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci035.h b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci035.h
deleted file mode 100644
index 3c700c7..0000000
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci035.h
+++ /dev/null
@@ -1,109 +0,0 @@
-/*
- * Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module.
- *
- * ADDI-DATA GmbH
- * Dieselstrasse 3
- * D-77833 Ottersweier
- * Tel: +19(0)7223/9493-0
- * Fax: +49(0)7223/9493-92
- * http://www.addi-data.com
- * info@addi-data.com
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 of the License, or (at your option)
- * any later version.
- */
-
-/* Card Specific information */
-#define APCI035_BOARD_VENDOR_ID 0x15B8
-#define APCI035_ADDRESS_RANGE 255
-
-/* ANALOG INPUT RANGE */
-static struct comedi_lrange range_apci035_ai = { 8, {
- BIP_RANGE(10),
- BIP_RANGE(5),
- BIP_RANGE(2),
- BIP_RANGE(1),
- UNI_RANGE(10),
- UNI_RANGE(5),
- UNI_RANGE(2),
- UNI_RANGE(1)
- }
-};
-
-/* Timer / Watchdog Related Defines */
-#define APCI035_TCW_SYNC_ENABLEDISABLE 0
-#define APCI035_TCW_RELOAD_VALUE 4
-#define APCI035_TCW_TIMEBASE 8
-#define APCI035_TCW_PROG 12
-#define APCI035_TCW_TRIG_STATUS 16
-#define APCI035_TCW_IRQ 20
-#define APCI035_TCW_WARN_TIMEVAL 24
-#define APCI035_TCW_WARN_TIMEBASE 28
-
-#define ADDIDATA_TIMER 0
-/* #define ADDIDATA_WATCHDOG 1 */
-
-#define APCI035_TW1 0
-#define APCI035_TW2 32
-#define APCI035_TW3 64
-#define APCI035_TW4 96
-
-#define APCI035_AI_OFFSET 0
-#define APCI035_TEMP 128
-#define APCI035_ALR_SEQ 4
-#define APCI035_START_STOP_INDEX 8
-#define APCI035_ALR_START_STOP 12
-#define APCI035_ALR_IRQ 16
-#define APCI035_EOS 20
-#define APCI035_CHAN_NO 24
-#define APCI035_CHAN_VAL 28
-#define APCI035_CONV_TIME_TIME_BASE 36
-#define APCI035_RELOAD_CONV_TIME_VAL 32
-#define APCI035_DELAY_TIME_TIME_BASE 44
-#define APCI035_RELOAD_DELAY_TIME_VAL 40
-#define ENABLE_EXT_TRIG 1
-#define ENABLE_EXT_GATE 2
-#define ENABLE_EXT_TRIG_GATE 3
-
-#define ANALOG_INPUT 0
-#define TEMPERATURE 1
-#define RESISTANCE 2
-
-#define ADDIDATA_GREATER_THAN_TEST 0
-#define ADDIDATA_LESS_THAN_TEST 1
-
-#define APCI035_MAXVOLT 2.5
-
-#define ADDIDATA_UNIPOLAR 1
-#define ADDIDATA_BIPOLAR 2
-
-/* ADDIDATA Enable Disable */
-#define ADDIDATA_ENABLE 1
-#define ADDIDATA_DISABLE 0
-
-/* Hardware Layer functions for Apci035 */
-
-/* TIMER */
-/* timer value is passed as u seconds */
-int i_APCI035_ConfigTimerWatchdog(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-int i_APCI035_StartStopWriteTimerWatchdog(struct comedi_device *dev,
- struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-int i_APCI035_ReadTimerWatchdog(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-
-/* Temperature Related Defines (Analog Input Subdevice) */
-
-int i_APCI035_ConfigAnalogInput(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-int i_APCI035_ReadAnalogInput(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-
-/* Interrupt */
-static void v_APCI035_Interrupt(int irq, void *d);
-
-/* Reset functions */
-int i_APCI035_Reset(struct comedi_device *dev);
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1032.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1032.c
deleted file mode 100644
index bab7b61..0000000
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1032.c
+++ /dev/null
@@ -1,287 +0,0 @@
-/**
-@verbatim
-
-Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module.
-
- ADDI-DATA GmbH
- Dieselstrasse 3
- D-77833 Ottersweier
- Tel: +19(0)7223/9493-0
- Fax: +49(0)7223/9493-92
- http://www.addi-data.com
- info@addi-data.com
-
-This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
-
-This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-
-You should also find the complete GPL in the COPYING file accompanying this source code.
-
-@endverbatim
-*/
-/*
-
- +-----------------------------------------------------------------------+
- | (C) ADDI-DATA GmbH Dieselstraße 3 D-77833 Ottersweier |
- +-----------------------------------------------------------------------+
- | Tel : +49 (0) 7223/9493-0 | email : info@addi-data.com |
- | Fax : +49 (0) 7223/9493-92 | Internet : http://www.addi-data.com |
- +-------------------------------+---------------------------------------+
- | Project : APCI-1032 | Compiler : GCC |
- | Module name : hwdrv_apci1032.c| Version : 2.96 |
- +-------------------------------+---------------------------------------+
- | Project manager: Eric Stolz | Date : 02/12/2002 |
- +-------------------------------+---------------------------------------+
- | Description : Hardware Layer Access For APCI-1032 |
- +-----------------------------------------------------------------------+
- | UPDATES |
- +----------+-----------+------------------------------------------------+
- | Date | Author | Description of updates |
- +----------+-----------+------------------------------------------------+
- | | | |
- | | | |
- | | | |
- +----------+-----------+------------------------------------------------+
-*/
-
-/*
-+----------------------------------------------------------------------------+
-| Included files |
-+----------------------------------------------------------------------------+
-*/
-#include "hwdrv_apci1032.h"
-#include <linux/delay.h>
-
-static unsigned int ui_InterruptStatus;
-
-/*
-+----------------------------------------------------------------------------+
-| Function Name : int i_APCI1032_ConfigDigitalInput |
-| (struct comedi_device *dev,struct comedi_subdevice *s, |
-| struct comedi_insn *insn,unsigned int *data) |
-+----------------------------------------------------------------------------+
-| Task : Configures the digital input Subdevice |
-+----------------------------------------------------------------------------+
-| Input Parameters : struct comedi_device *dev : Driver handle |
-| unsigned int *data : Data Pointer contains |
-| configuration parameters as below |
-| |
-| data[0] : 1 Enable Digital Input Interrupt |
-| 0 Disable Digital Input Interrupt |
-| data[1] : 0 ADDIDATA Interrupt OR LOGIC |
-| : 1 ADDIDATA Interrupt AND LOGIC |
-| data[2] : Interrupt mask for the mode 1 |
-| data[3] : Interrupt mask for the mode 2 |
-| |
-+----------------------------------------------------------------------------+
-| Output Parameters : -- |
-+----------------------------------------------------------------------------+
-| Return Value : TRUE : No error occur |
-| : FALSE : Error occur. Return the error |
-| |
-+----------------------------------------------------------------------------+
-*/
-
-int i_APCI1032_ConfigDigitalInput(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data)
-{
- unsigned int ui_TmpValue;
-
- unsigned int ul_Command1 = 0;
- unsigned int ul_Command2 = 0;
- devpriv->tsk_Current = current;
-
- /*******************************/
- /* Set the digital input logic */
- /*******************************/
- if (data[0] == ADDIDATA_ENABLE) {
- ul_Command1 = ul_Command1 | data[2];
- ul_Command2 = ul_Command2 | data[3];
- outl(ul_Command1,
- devpriv->iobase + APCI1032_DIGITAL_IP_INTERRUPT_MODE1);
- outl(ul_Command2,
- devpriv->iobase + APCI1032_DIGITAL_IP_INTERRUPT_MODE2);
- if (data[1] == ADDIDATA_OR) {
- outl(0x4, devpriv->iobase + APCI1032_DIGITAL_IP_IRQ);
- ui_TmpValue =
- inl(devpriv->iobase + APCI1032_DIGITAL_IP_IRQ);
- } /* if (data[1] == ADDIDATA_OR) */
- else
- outl(0x6, devpriv->iobase + APCI1032_DIGITAL_IP_IRQ);
- /* else if(data[1] == ADDIDATA_OR) */
- } /* if( data[0] == ADDIDATA_ENABLE) */
- else {
- ul_Command1 = ul_Command1 & 0xFFFF0000;
- ul_Command2 = ul_Command2 & 0xFFFF0000;
- outl(ul_Command1,
- devpriv->iobase + APCI1032_DIGITAL_IP_INTERRUPT_MODE1);
- outl(ul_Command2,
- devpriv->iobase + APCI1032_DIGITAL_IP_INTERRUPT_MODE2);
- outl(0x0, devpriv->iobase + APCI1032_DIGITAL_IP_IRQ);
- } /* else if ( data[0] == ADDIDATA_ENABLE) */
-
- return insn->n;
-}
-
-/*
-+----------------------------------------------------------------------------+
-| Function Name : int i_APCI1032_Read1DigitalInput |
-| (struct comedi_device *dev,struct comedi_subdevice *s, |
-| struct comedi_insn *insn,unsigned int *data) |
-+----------------------------------------------------------------------------+
-| Task : Return the status of the digital input |
-+----------------------------------------------------------------------------+
-| Input Parameters : struct comedi_device *dev : Driver handle |
-| unsigned int ui_Channel : Channel number to read |
-| unsigned int *data : Data Pointer to read status |
-+----------------------------------------------------------------------------+
-| Output Parameters : -- |
-+----------------------------------------------------------------------------+
-| Return Value : TRUE : No error occur |
-| : FALSE : Error occur. Return the error |
-| |
-+----------------------------------------------------------------------------+
-*/
-int i_APCI1032_Read1DigitalInput(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data)
-{
- unsigned int ui_TmpValue = 0;
- unsigned int ui_Channel;
- ui_Channel = CR_CHAN(insn->chanspec);
- if (ui_Channel <= 31) {
- ui_TmpValue = (unsigned int) inl(devpriv->iobase + APCI1032_DIGITAL_IP);
-/*
-* since only 1 channel reqd to bring it to last bit it is rotated 8
-* +(chan - 1) times then ANDed with 1 for last bit.
-*/
- *data = (ui_TmpValue >> ui_Channel) & 0x1;
- } /* if(ui_Channel >= 0 && ui_Channel <=31) */
- else {
- /* comedi_error(dev," \n chan spec wrong\n"); */
- return -EINVAL; /* "sorry channel spec wrong " */
- } /* else if(ui_Channel >= 0 && ui_Channel <=31) */
- return insn->n;
-}
-
-/*
-+----------------------------------------------------------------------------+
-| Function Name : int i_APCI1032_ReadMoreDigitalInput |
-| (struct comedi_device *dev,struct comedi_subdevice *s, |
-| struct comedi_insn *insn,unsigned int *data) |
-+----------------------------------------------------------------------------+
-| Task : Return the status of the Requested digital inputs |
-+----------------------------------------------------------------------------+
-| Input Parameters : struct comedi_device *dev : Driver handle |
-| unsigned int ui_NoOfChannels : No Of Channels To be Read |
-| unsigned int *data : Data Pointer to read status |
-+----------------------------------------------------------------------------+
-| Output Parameters : -- |
-+----------------------------------------------------------------------------+
-| Return Value : TRUE : No error occur |
-| : FALSE : Error occur. Return the error |
-| |
-+----------------------------------------------------------------------------+
-*/
-
-int i_APCI1032_ReadMoreDigitalInput(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data)
-{
- unsigned int ui_PortValue = data[0];
- unsigned int ui_Mask = 0;
- unsigned int ui_NoOfChannels;
-
- ui_NoOfChannels = CR_CHAN(insn->chanspec);
- if (data[1] == 0) {
- *data = (unsigned int) inl(devpriv->iobase + APCI1032_DIGITAL_IP);
- switch (ui_NoOfChannels) {
- case 2:
- ui_Mask = 3;
- *data = (*data >> (2 * ui_PortValue)) & ui_Mask;
- break;
- case 4:
- ui_Mask = 15;
- *data = (*data >> (4 * ui_PortValue)) & ui_Mask;
- break;
- case 8:
- ui_Mask = 255;
- *data = (*data >> (8 * ui_PortValue)) & ui_Mask;
- break;
- case 16:
- ui_Mask = 65535;
- *data = (*data >> (16 * ui_PortValue)) & ui_Mask;
- break;
- case 31:
- break;
- default:
- /* comedi_error(dev," \nchan spec wrong\n"); */
- return -EINVAL; /* "sorry channel spec wrong " */
- break;
- } /* switch(ui_NoOfChannels) */
- } /* if(data[1]==0) */
- else {
- if (data[1] == 1)
- *data = ui_InterruptStatus;
- /* if(data[1]==1) */
- } /* else if(data[1]==0) */
- return insn->n;
-}
-
-/*
-+----------------------------------------------------------------------------+
-| Function Name : static void v_APCI1032_Interrupt |
-| (int irq , void *d) |
-+----------------------------------------------------------------------------+
-| Task : Interrupt handler for the interruptible digital inputs |
-+----------------------------------------------------------------------------+
-| Input Parameters : int irq : irq number |
-| void *d : void pointer |
-+----------------------------------------------------------------------------+
-| Output Parameters : -- |
-+----------------------------------------------------------------------------+
-| Return Value : TRUE : No error occur |
-| : FALSE : Error occur. Return the error |
-| |
-+----------------------------------------------------------------------------+
-*/
-static void v_APCI1032_Interrupt(int irq, void *d)
-{
- struct comedi_device *dev = d;
-
- unsigned int ui_Temp;
- /* disable the interrupt */
- ui_Temp = inl(devpriv->iobase + APCI1032_DIGITAL_IP_IRQ);
- outl(ui_Temp & APCI1032_DIGITAL_IP_INTERRUPT_DISABLE,
- devpriv->iobase + APCI1032_DIGITAL_IP_IRQ);
- ui_InterruptStatus =
- inl(devpriv->iobase + APCI1032_DIGITAL_IP_INTERRUPT_STATUS);
- ui_InterruptStatus = ui_InterruptStatus & 0X0000FFFF;
- send_sig(SIGIO, devpriv->tsk_Current, 0); /* send signal to the sample */
- outl(ui_Temp, devpriv->iobase + APCI1032_DIGITAL_IP_IRQ); /* enable the interrupt */
- return;
-}
-
-/*
-+----------------------------------------------------------------------------+
-| Function Name : int i_APCI1032_Reset(struct comedi_device *dev) | |
-+----------------------------------------------------------------------------+
-| Task :resets all the registers |
-+----------------------------------------------------------------------------+
-| Input Parameters : struct comedi_device *dev
-+----------------------------------------------------------------------------+
-| Output Parameters : -- |
-+----------------------------------------------------------------------------+
-| Return Value : |
-| |
-+----------------------------------------------------------------------------+
-*/
-
-int i_APCI1032_Reset(struct comedi_device *dev)
-{
- outl(0x0, devpriv->iobase + APCI1032_DIGITAL_IP_IRQ); /* disable the interrupts */
- inl(devpriv->iobase + APCI1032_DIGITAL_IP_INTERRUPT_STATUS); /* Reset the interrupt status register */
- outl(0x0, devpriv->iobase + APCI1032_DIGITAL_IP_INTERRUPT_MODE1); /* Disable the and/or interrupt */
- outl(0x0, devpriv->iobase + APCI1032_DIGITAL_IP_INTERRUPT_MODE2);
- return 0;
-}
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1032.h b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1032.h
deleted file mode 100644
index 7114acb..0000000
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1032.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- * Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module.
- *
- * ADDI-DATA GmbH
- * Dieselstrasse 3
- * D-77833 Ottersweier
- * Tel: +19(0)7223/9493-0
- * Fax: +49(0)7223/9493-92
- * http://www.addi-data.com
- * info@addi-data.com
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 of the License, or (at your option)
- * any later version.
- */
-
-/********* Definitions for APCI-1032 card *****/
-
-#define APCI1032_BOARD_VENDOR_ID 0x15B8
-#define APCI1032_ADDRESS_RANGE 20
-/* DIGITAL INPUT DEFINE */
-
-#define APCI1032_DIGITAL_IP 0
-#define APCI1032_DIGITAL_IP_INTERRUPT_MODE1 4
-#define APCI1032_DIGITAL_IP_INTERRUPT_MODE2 8
-#define APCI1032_DIGITAL_IP_IRQ 16
-
-/* Digital Input IRQ Function Selection */
-#define ADDIDATA_OR 0
-#define ADDIDATA_AND 1
-
-/* Digital Input Interrupt Status */
-#define APCI1032_DIGITAL_IP_INTERRUPT_STATUS 12
-
-/* Digital Input Interrupt Enable Disable. */
-#define APCI1032_DIGITAL_IP_INTERRUPT_ENABLE 0x4
-#define APCI1032_DIGITAL_IP_INTERRUPT_DISABLE 0xFFFFFFFB
-
-/* ADDIDATA Enable Disable */
-
-#define ADDIDATA_ENABLE 1
-#define ADDIDATA_DISABLE 0
-
-/* Hardware Layer functions for Apci1032 */
-
-/*
-* DI for di read
-*/
-
-int i_APCI1032_ConfigDigitalInput(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-
-int i_APCI1032_Read1DigitalInput(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-
-int i_APCI1032_ReadMoreDigitalInput(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-
-/* Interrupt functions..... */
-
-static void v_APCI1032_Interrupt(int irq, void *d);
-/* Reset */
-int i_APCI1032_Reset(struct comedi_device *dev);
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1500.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1500.c
index 62f421a..24c4c98 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1500.c
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1500.c
@@ -45,7 +45,105 @@
| | | |
+----------+-----------+------------------------------------------------+
*/
-#include "hwdrv_apci1500.h"
+
+/********* Definitions for APCI-1500 card *****/
+
+/* Card Specific information */
+#define APCI1500_ADDRESS_RANGE 4
+
+/* DIGITAL INPUT-OUTPUT DEFINE */
+
+#define APCI1500_DIGITAL_OP 2
+#define APCI1500_DIGITAL_IP 0
+#define APCI1500_AND 2
+#define APCI1500_OR 4
+#define APCI1500_OR_PRIORITY 6
+#define APCI1500_CLK_SELECT 0
+#define COUNTER1 0
+#define COUNTER2 1
+#define COUNTER3 2
+#define APCI1500_COUNTER 0x20
+#define APCI1500_TIMER 0
+#define APCI1500_WATCHDOG 0
+#define APCI1500_SINGLE 0
+#define APCI1500_CONTINUOUS 0x80
+#define APCI1500_DISABLE 0
+#define APCI1500_ENABLE 1
+#define APCI1500_SOFTWARE_TRIGGER 0x4
+#define APCI1500_HARDWARE_TRIGGER 0x10
+#define APCI1500_SOFTWARE_GATE 0
+#define APCI1500_HARDWARE_GATE 0x8
+#define START 0
+#define STOP 1
+#define TRIGGER 2
+
+/*
+ * Zillog I/O enumeration
+ */
+enum {
+ APCI1500_Z8536_PORT_C,
+ APCI1500_Z8536_PORT_B,
+ APCI1500_Z8536_PORT_A,
+ APCI1500_Z8536_CONTROL_REGISTER
+};
+
+/*
+ * Z8536 CIO Internal Address
+ */
+enum {
+ APCI1500_RW_MASTER_INTERRUPT_CONTROL,
+ APCI1500_RW_MASTER_CONFIGURATION_CONTROL,
+ APCI1500_RW_PORT_A_INTERRUPT_CONTROL,
+ APCI1500_RW_PORT_B_INTERRUPT_CONTROL,
+ APCI1500_RW_TIMER_COUNTER_INTERRUPT_VECTOR,
+ APCI1500_RW_PORT_C_DATA_PCITCH_POLARITY,
+ APCI1500_RW_PORT_C_DATA_DIRECTION,
+ APCI1500_RW_PORT_C_SPECIAL_IO_CONTROL,
+
+ APCI1500_RW_PORT_A_COMMAND_AND_STATUS,
+ APCI1500_RW_PORT_B_COMMAND_AND_STATUS,
+ APCI1500_RW_CPT_TMR1_CMD_STATUS,
+ APCI1500_RW_CPT_TMR2_CMD_STATUS,
+ APCI1500_RW_CPT_TMR3_CMD_STATUS,
+ APCI1500_RW_PORT_A_DATA,
+ APCI1500_RW_PORT_B_DATA,
+ APCI1500_RW_PORT_C_DATA,
+
+ APCI1500_R_CPT_TMR1_VALUE_HIGH,
+ APCI1500_R_CPT_TMR1_VALUE_LOW,
+ APCI1500_R_CPT_TMR2_VALUE_HIGH,
+ APCI1500_R_CPT_TMR2_VALUE_LOW,
+ APCI1500_R_CPT_TMR3_VALUE_HIGH,
+ APCI1500_R_CPT_TMR3_VALUE_LOW,
+ APCI1500_RW_CPT_TMR1_TIME_CST_HIGH,
+ APCI1500_RW_CPT_TMR1_TIME_CST_LOW,
+ APCI1500_RW_CPT_TMR2_TIME_CST_HIGH,
+ APCI1500_RW_CPT_TMR2_TIME_CST_LOW,
+ APCI1500_RW_CPT_TMR3_TIME_CST_HIGH,
+ APCI1500_RW_CPT_TMR3_TIME_CST_LOW,
+ APCI1500_RW_CPT_TMR1_MODE_SPECIFICATION,
+ APCI1500_RW_CPT_TMR2_MODE_SPECIFICATION,
+ APCI1500_RW_CPT_TMR3_MODE_SPECIFICATION,
+ APCI1500_R_CURRENT_VECTOR,
+
+ APCI1500_RW_PORT_A_SPECIFICATION,
+ APCI1500_RW_PORT_A_HANDSHAKE_SPECIFICATION,
+ APCI1500_RW_PORT_A_DATA_PCITCH_POLARITY,
+ APCI1500_RW_PORT_A_DATA_DIRECTION,
+ APCI1500_RW_PORT_A_SPECIAL_IO_CONTROL,
+ APCI1500_RW_PORT_A_PATTERN_POLARITY,
+ APCI1500_RW_PORT_A_PATTERN_TRANSITION,
+ APCI1500_RW_PORT_A_PATTERN_MASK,
+
+ APCI1500_RW_PORT_B_SPECIFICATION,
+ APCI1500_RW_PORT_B_HANDSHAKE_SPECIFICATION,
+ APCI1500_RW_PORT_B_DATA_PCITCH_POLARITY,
+ APCI1500_RW_PORT_B_DATA_DIRECTION,
+ APCI1500_RW_PORT_B_SPECIAL_IO_CONTROL,
+ APCI1500_RW_PORT_B_PATTERN_POLARITY,
+ APCI1500_RW_PORT_B_PATTERN_TRANSITION,
+ APCI1500_RW_PORT_B_PATTERN_MASK
+};
static int i_TimerCounter1Init = 0;
static int i_TimerCounter2Init = 0;
@@ -141,6 +239,7 @@
struct comedi_insn *insn,
unsigned int *data)
{
+ struct addi_private *devpriv = dev->private;
int i_PatternPolarity = 0, i_PatternTransition = 0, i_PatternMask = 0;
int i_MaxChannel = 0, i_Count = 0, i_EventMask = 0;
int i_PatternTransitionCount = 0, i_RegValue;
@@ -525,8 +624,10 @@
struct comedi_insn *insn,
unsigned int *data)
{
+ struct addi_private *devpriv = dev->private;
int i_Event1InterruptStatus = 0, i_Event2InterruptStatus =
0, i_RegValue;
+
switch (data[0]) {
case START:
/*************************/
@@ -792,7 +893,9 @@
struct comedi_insn *insn,
unsigned int *data)
{
+ struct addi_private *devpriv = dev->private;
int i_DummyRead = 0;
+
/******************/
/* Software reset */
/******************/
@@ -939,82 +1042,15 @@
return insn->n;
}
-/*
-+----------------------------------------------------------------------------+
-| Function Name : int i_APCI1500_ReadMoreDigitalInput |
-| (struct comedi_device *dev,struct comedi_subdevice *s, |
-| struct comedi_insn *insn,unsigned int *data) |
-+----------------------------------------------------------------------------+
-| Task : Return the status of the Requested digital inputs |
-+----------------------------------------------------------------------------+
-| Input Parameters : struct comedi_device *dev : Driver handle |
-| unsigned int ui_NoOfChannels : No Of Channels To be Read |
-| unsigned int *data : Data Pointer
-| data[0] : 0 Read a single channel
-| 1 read a port value
-| data[1] : port value
-+----------------------------------------------------------------------------+
-| Output Parameters : -- data[0] :The read status value
-+----------------------------------------------------------------------------+
-| Return Value : TRUE : No error occur |
-| : FALSE : Error occur. Return the error |
-| |
-+----------------------------------------------------------------------------+
-*/
-static int i_APCI1500_ReadMoreDigitalInput(struct comedi_device *dev,
- struct comedi_subdevice *s,
- struct comedi_insn *insn,
- unsigned int *data)
+static int apci1500_di_insn_bits(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
{
- unsigned int ui_PortValue = data[1];
- unsigned int ui_Mask = 0;
- unsigned int ui_Channel;
- unsigned int ui_TmpValue = 0;
- ui_Channel = CR_CHAN(insn->chanspec);
+ struct addi_private *devpriv = dev->private;
- switch (data[0]) {
- case 0:
- if (ui_Channel <= 15) {
- ui_TmpValue =
- (unsigned int) inw(devpriv->i_IobaseAddon +
- APCI1500_DIGITAL_IP);
- *data = (ui_TmpValue >> ui_Channel) & 0x1;
- } /* if(ui_Channel >= 0 && ui_Channel <=15) */
- else {
- printk("\nThe channel specification are in error\n");
- return -EINVAL; /* "sorry channel spec wrong " */
- } /* else if(ui_Channel >= 0 && ui_Channel <=15) */
- break;
- case 1:
+ data[1] = inw(devpriv->i_IobaseAddon + APCI1500_DIGITAL_IP);
- *data = (unsigned int) inw(devpriv->i_IobaseAddon +
- APCI1500_DIGITAL_IP);
- switch (ui_Channel) {
- case 2:
- ui_Mask = 3;
- *data = (*data >> (2 * ui_PortValue)) & ui_Mask;
- break;
- case 4:
- ui_Mask = 15;
- *data = (*data >> (4 * ui_PortValue)) & ui_Mask;
- break;
- case 8:
- ui_Mask = 255;
- *data = (*data >> (8 * ui_PortValue)) & ui_Mask;
- break;
- case 15:
- break;
-
- default:
- printk("\nSpecified channel cannot be read \n");
- return -EINVAL; /* "sorry channel spec wrong " */
- break;
- } /* switch(ui_Channel) */
- break;
- default:
- printk("\nThe specified functionality does not exist\n");
- return -EINVAL;
- } /* switch(data[0]) */
return insn->n;
}
@@ -1051,6 +1087,8 @@
struct comedi_insn *insn,
unsigned int *data)
{
+ struct addi_private *devpriv = dev->private;
+
devpriv->b_OutputMemoryStatus = data[0];
return insn->n;
}
@@ -1079,9 +1117,9 @@
struct comedi_insn *insn,
unsigned int *data)
{
+ struct addi_private *devpriv = dev->private;
static unsigned int ui_Temp = 0;
unsigned int ui_Temp1;
-
unsigned int ui_NoOfChannel = CR_CHAN(insn->chanspec); /* get the channel */
if (!devpriv->b_OutputMemoryStatus) {
@@ -1274,6 +1312,7 @@
struct comedi_insn *insn,
unsigned int *data)
{
+ struct addi_private *devpriv = dev->private;
int i_TimerCounterMode, i_MasterConfiguration;
devpriv->tsk_Current = current;
@@ -1875,6 +1914,7 @@
struct comedi_insn *insn,
unsigned int *data)
{
+ struct addi_private *devpriv = dev->private;
int i_CommandAndStatusValue;
switch (data[0]) {
@@ -2198,7 +2238,9 @@
struct comedi_insn *insn,
unsigned int *data)
{
+ struct addi_private *devpriv = dev->private;
int i_CommandAndStatusValue;
+
switch (data[0]) {
case COUNTER1:
/* Read counter/timer1 */
@@ -2421,9 +2463,11 @@
struct comedi_insn *insn,
unsigned int *data)
{
+ struct addi_private *devpriv = dev->private;
unsigned int ui_Status;
int i_RegValue;
int i_Constant;
+
devpriv->tsk_Current = current;
outl(0x0, devpriv->i_IobaseAmcc + 0x38);
if (data[0] == 1) {
@@ -2597,6 +2641,7 @@
{
struct comedi_device *dev = d;
+ struct addi_private *devpriv = dev->private;
unsigned int ui_InterruptStatus = 0;
int i_RegValue = 0;
i_InterruptMask = 0;
@@ -2840,7 +2885,9 @@
*/
static int i_APCI1500_Reset(struct comedi_device *dev)
{
+ struct addi_private *devpriv = dev->private;
int i_DummyRead = 0;
+
i_TimerCounter1Init = 0;
i_TimerCounter2Init = 0;
i_WatchdogCounter3Init = 0;
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1500.h b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1500.h
deleted file mode 100644
index 647f9eb..0000000
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1500.h
+++ /dev/null
@@ -1,165 +0,0 @@
-/*
- * Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module.
- *
- * ADDI-DATA GmbH
- * Dieselstrasse 3
- * D-77833 Ottersweier
- * Tel: +19(0)7223/9493-0
- * Fax: +49(0)7223/9493-92
- * http://www.addi-data.com
- * info@addi-data.com
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 of the License, or (at your option)
- * any later version.
- */
-
-/********* Definitions for APCI-1500 card *****/
-
-/* Card Specific information */
-#define APCI1500_BOARD_VENDOR_ID 0x10e8
-#define APCI1500_ADDRESS_RANGE 4
-
-/* DIGITAL INPUT-OUTPUT DEFINE */
-
-#define APCI1500_DIGITAL_OP 2
-#define APCI1500_DIGITAL_IP 0
-#define APCI1500_AND 2
-#define APCI1500_OR 4
-#define APCI1500_OR_PRIORITY 6
-#define APCI1500_CLK_SELECT 0
-#define COUNTER1 0
-#define COUNTER2 1
-#define COUNTER3 2
-#define APCI1500_COUNTER 0x20
-#define APCI1500_TIMER 0
-#define APCI1500_WATCHDOG 0
-#define APCI1500_SINGLE 0
-#define APCI1500_CONTINUOUS 0x80
-#define APCI1500_DISABLE 0
-#define APCI1500_ENABLE 1
-#define APCI1500_SOFTWARE_TRIGGER 0x4
-#define APCI1500_HARDWARE_TRIGGER 0x10
-#define APCI1500_SOFTWARE_GATE 0
-#define APCI1500_HARDWARE_GATE 0x8
-#define START 0
-#define STOP 1
-#define TRIGGER 2
-
-/*
- * Zillog I/O enumeration
- */
-enum {
- APCI1500_Z8536_PORT_C,
- APCI1500_Z8536_PORT_B,
- APCI1500_Z8536_PORT_A,
- APCI1500_Z8536_CONTROL_REGISTER
-};
-
-/*
- * Z8536 CIO Internal Address
- */
-enum {
- APCI1500_RW_MASTER_INTERRUPT_CONTROL,
- APCI1500_RW_MASTER_CONFIGURATION_CONTROL,
- APCI1500_RW_PORT_A_INTERRUPT_CONTROL,
- APCI1500_RW_PORT_B_INTERRUPT_CONTROL,
- APCI1500_RW_TIMER_COUNTER_INTERRUPT_VECTOR,
- APCI1500_RW_PORT_C_DATA_PCITCH_POLARITY,
- APCI1500_RW_PORT_C_DATA_DIRECTION,
- APCI1500_RW_PORT_C_SPECIAL_IO_CONTROL,
-
- APCI1500_RW_PORT_A_COMMAND_AND_STATUS,
- APCI1500_RW_PORT_B_COMMAND_AND_STATUS,
- APCI1500_RW_CPT_TMR1_CMD_STATUS,
- APCI1500_RW_CPT_TMR2_CMD_STATUS,
- APCI1500_RW_CPT_TMR3_CMD_STATUS,
- APCI1500_RW_PORT_A_DATA,
- APCI1500_RW_PORT_B_DATA,
- APCI1500_RW_PORT_C_DATA,
-
- APCI1500_R_CPT_TMR1_VALUE_HIGH,
- APCI1500_R_CPT_TMR1_VALUE_LOW,
- APCI1500_R_CPT_TMR2_VALUE_HIGH,
- APCI1500_R_CPT_TMR2_VALUE_LOW,
- APCI1500_R_CPT_TMR3_VALUE_HIGH,
- APCI1500_R_CPT_TMR3_VALUE_LOW,
- APCI1500_RW_CPT_TMR1_TIME_CST_HIGH,
- APCI1500_RW_CPT_TMR1_TIME_CST_LOW,
- APCI1500_RW_CPT_TMR2_TIME_CST_HIGH,
- APCI1500_RW_CPT_TMR2_TIME_CST_LOW,
- APCI1500_RW_CPT_TMR3_TIME_CST_HIGH,
- APCI1500_RW_CPT_TMR3_TIME_CST_LOW,
- APCI1500_RW_CPT_TMR1_MODE_SPECIFICATION,
- APCI1500_RW_CPT_TMR2_MODE_SPECIFICATION,
- APCI1500_RW_CPT_TMR3_MODE_SPECIFICATION,
- APCI1500_R_CURRENT_VECTOR,
-
- APCI1500_RW_PORT_A_SPECIFICATION,
- APCI1500_RW_PORT_A_HANDSHAKE_SPECIFICATION,
- APCI1500_RW_PORT_A_DATA_PCITCH_POLARITY,
- APCI1500_RW_PORT_A_DATA_DIRECTION,
- APCI1500_RW_PORT_A_SPECIAL_IO_CONTROL,
- APCI1500_RW_PORT_A_PATTERN_POLARITY,
- APCI1500_RW_PORT_A_PATTERN_TRANSITION,
- APCI1500_RW_PORT_A_PATTERN_MASK,
-
- APCI1500_RW_PORT_B_SPECIFICATION,
- APCI1500_RW_PORT_B_HANDSHAKE_SPECIFICATION,
- APCI1500_RW_PORT_B_DATA_PCITCH_POLARITY,
- APCI1500_RW_PORT_B_DATA_DIRECTION,
- APCI1500_RW_PORT_B_SPECIAL_IO_CONTROL,
- APCI1500_RW_PORT_B_PATTERN_POLARITY,
- APCI1500_RW_PORT_B_PATTERN_TRANSITION,
- APCI1500_RW_PORT_B_PATTERN_MASK
-};
-
- /*----------DIGITAL INPUT----------------*/
-static int i_APCI1500_Initialisation(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-static int i_APCI1500_ConfigDigitalInputEvent(struct comedi_device *dev,
- struct comedi_subdevice *s,
- struct comedi_insn *insn,
- unsigned int *data);
-
-static int i_APCI1500_StartStopInputEvent(struct comedi_device *dev,
- struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-static int i_APCI1500_ReadMoreDigitalInput(struct comedi_device *dev,
- struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-
-/*---------- DIGITAL OUTPUT------------*/
-static int i_APCI1500_ConfigDigitalOutputErrorInterrupt(struct comedi_device *dev,
- struct comedi_subdevice *s,
- struct comedi_insn *insn,
- unsigned int *data);
-static int i_APCI1500_WriteDigitalOutput(struct comedi_device *dev,
- struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-
-/*----------TIMER----------------*/
-static int i_APCI1500_ConfigCounterTimerWatchdog(struct comedi_device *dev,
- struct comedi_subdevice *s,
- struct comedi_insn *insn,
- unsigned int *data);
-static int i_APCI1500_StartStopTriggerTimerCounterWatchdog(struct comedi_device *dev,
- struct comedi_subdevice *s,
- struct comedi_insn *insn,
- unsigned int *data);
-static int i_APCI1500_ReadCounterTimerWatchdog(struct comedi_device *dev,
- struct comedi_subdevice *s,
- struct comedi_insn *insn,
- unsigned int *data);
-static int i_APCI1500_ReadInterruptMask(struct comedi_device *dev,
- struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-
-/*----------INTERRUPT HANDLER------*/
-static void v_APCI1500_Interrupt(int irq, void *d);
-static int i_APCI1500_ConfigureInterrupt(struct comedi_device *dev,
- struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-/*----------RESET---------------*/
-static int i_APCI1500_Reset(struct comedi_device *dev);
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1516.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1516.c
deleted file mode 100644
index 8a584a0..0000000
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1516.c
+++ /dev/null
@@ -1,542 +0,0 @@
-/**
-@verbatim
-
-Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module.
-
- ADDI-DATA GmbH
- Dieselstrasse 3
- D-77833 Ottersweier
- Tel: +19(0)7223/9493-0
- Fax: +49(0)7223/9493-92
- http://www.addi-data.com
- info@addi-data.com
-
-This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
-
-This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-
-You should also find the complete GPL in the COPYING file accompanying this source code.
-
-@endverbatim
-*/
-/*
-
- +-----------------------------------------------------------------------+
- | (C) ADDI-DATA GmbH Dieselstraße 3 D-77833 Ottersweier |
- +-----------------------------------------------------------------------+
- | Tel : +49 (0) 7223/9493-0 | email : info@addi-data.com |
- | Fax : +49 (0) 7223/9493-92 | Internet : http://www.addi-data.com |
- +-------------------------------+---------------------------------------+
- | Project : APCI-1516 | Compiler : GCC |
- | Module name : hwdrv_apci1516.c| Version : 2.96 |
- +-------------------------------+---------------------------------------+
- | Project manager: Eric Stolz | Date : 02/12/2002 |
- +-------------------------------+---------------------------------------+
- | Description : Hardware Layer Access For APCI-1516 |
- +-----------------------------------------------------------------------+
- | UPDATES |
- +----------+-----------+------------------------------------------------+
- | Date | Author | Description of updates |
- +----------+-----------+------------------------------------------------+
- | | | |
- | | | |
- | | | |
- +----------+-----------+------------------------------------------------+
-*/
-
-/*
-+----------------------------------------------------------------------------+
-| Included files |
-+----------------------------------------------------------------------------+
-*/
-#include "hwdrv_apci1516.h"
-
-/*
-+----------------------------------------------------------------------------+
-| Function Name : int i_APCI1516_Read1DigitalInput |
-| (struct comedi_device *dev,struct comedi_subdevice *s, |
-| struct comedi_insn *insn,unsigned int *data) |
-+----------------------------------------------------------------------------+
-| Task : Return the status of the digital input |
-+----------------------------------------------------------------------------+
-| Input Parameters : struct comedi_device *dev : Driver handle |
-| struct comedi_subdevice *s, :pointer to subdevice structure
-| struct comedi_insn *insn :pointer to insn structure |
-| unsigned int *data : Data Pointer to read status |
-+----------------------------------------------------------------------------+
-| Output Parameters : -- |
-+----------------------------------------------------------------------------+
-| Return Value : TRUE : No error occur |
-| : FALSE : Error occur. Return the error |
-| |
-+----------------------------------------------------------------------------+
-*/
-int i_APCI1516_Read1DigitalInput(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data)
-{
- unsigned int ui_TmpValue = 0;
- unsigned int ui_Channel;
- ui_Channel = CR_CHAN(insn->chanspec);
- if (ui_Channel <= 7) {
- ui_TmpValue = (unsigned int) inw(devpriv->iobase + APCI1516_DIGITAL_IP);
- /* since only 1 channel reqd to bring it to last bit it is rotated */
- /* 8 +(chan - 1) times then ANDed with 1 for last bit. */
- *data = (ui_TmpValue >> ui_Channel) & 0x1;
- } /* if(ui_Channel >= 0 && ui_Channel <=7) */
- else {
- /* comedi_error(dev," \n chan spec wrong\n"); */
- return -EINVAL; /* "sorry channel spec wrong " */
- } /* else if(ui_Channel >= 0 && ui_Channel <=7) */
-
- return insn->n;
-}
-
-/*
-+----------------------------------------------------------------------------+
-| Function Name : int i_APCI1516_ReadMoreDigitalInput |
-| (struct comedi_device *dev,struct comedi_subdevice *s, |
-| struct comedi_insn *insn,unsigned int *data) |
-+----------------------------------------------------------------------------+
-| Task : Return the status of the Requested digital inputs |
-+----------------------------------------------------------------------------+
-| Input Parameters : struct comedi_device *dev : Driver handle |
-| struct comedi_subdevice *s, :pointer to subdevice structure
-| struct comedi_insn *insn :pointer to insn structure |
-| unsigned int *data : Data Pointer to read status |
-+----------------------------------------------------------------------------+
-| Output Parameters : -- |
-+----------------------------------------------------------------------------+
-| Return Value : TRUE : No error occur |
-| : FALSE : Error occur. Return the error |
-| |
-+----------------------------------------------------------------------------+
-*/
-
-int i_APCI1516_ReadMoreDigitalInput(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data)
-{
-
- unsigned int ui_PortValue = data[0];
- unsigned int ui_Mask = 0;
- unsigned int ui_NoOfChannels;
-
- ui_NoOfChannels = CR_CHAN(insn->chanspec);
-
- *data = (unsigned int) inw(devpriv->iobase + APCI1516_DIGITAL_IP);
- switch (ui_NoOfChannels) {
- case 2:
- ui_Mask = 3;
- *data = (*data >> (2 * ui_PortValue)) & ui_Mask;
- break;
- case 4:
- ui_Mask = 15;
- *data = (*data >> (4 * ui_PortValue)) & ui_Mask;
- break;
- case 7:
- break;
-
- default:
- printk("\nWrong parameters\n");
- return -EINVAL; /* "sorry channel spec wrong " */
- break;
- } /* switch(ui_NoOfChannels) */
-
- return insn->n;
-}
-
-/*
-+----------------------------------------------------------------------------+
-| Function Name : int i_APCI1516_ConfigDigitalOutput (struct comedi_device *dev,
-| struct comedi_subdevice *s struct comedi_insn *insn,unsigned int *data) |
-| |
-+----------------------------------------------------------------------------+
-| Task : Configures The Digital Output Subdevice. |
-+----------------------------------------------------------------------------+
-| Input Parameters : struct comedi_device *dev : Driver handle |
-| unsigned int *data : Data Pointer contains |
-| configuration parameters as below |
-| struct comedi_subdevice *s, :pointer to subdevice structure
-| struct comedi_insn *insn :pointer to insn structure |
-| data[0] :1:Memory on |
-| 0:Memory off |
-| |
-| |
-+----------------------------------------------------------------------------+
-| Output Parameters : -- |
-+----------------------------------------------------------------------------+
-| Return Value : TRUE : No error occur |
-| : FALSE : Error occur. Return the error |
-| |
-+----------------------------------------------------------------------------+
-*/
-int i_APCI1516_ConfigDigitalOutput(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data)
-{
- devpriv->b_OutputMemoryStatus = data[0];
- return insn->n;
-}
-
-/*
-+----------------------------------------------------------------------------+
-| Function Name : int i_APCI1516_WriteDigitalOutput |
-| (struct comedi_device *dev,struct comedi_subdevice *s,struct comedi_insn *insn,
-| unsigned int *data) |
-+----------------------------------------------------------------------------+
-| Task : Writes port value To the selected port |
-+----------------------------------------------------------------------------+
-| Input Parameters : struct comedi_device *dev : Driver handle |
-| struct comedi_subdevice *s, :pointer to subdevice structure
-| struct comedi_insn *insn :pointer to insn structure |
-| unsigned int *data : Data Pointer to read status |
-+----------------------------------------------------------------------------+
-| Output Parameters : -- |
-+----------------------------------------------------------------------------+
-| Return Value : TRUE : No error occur |
-| : FALSE : Error occur. Return the error |
-| |
-+----------------------------------------------------------------------------+
-*/
-
-int i_APCI1516_WriteDigitalOutput(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data)
-{
- unsigned int ui_Temp, ui_Temp1;
- unsigned int ui_NoOfChannel = CR_CHAN(insn->chanspec); /* get the channel */
-
- printk("EL311003 : @=%x\n", devpriv->iobase + APCI1516_DIGITAL_OP);
-
- if (devpriv->b_OutputMemoryStatus) {
- ui_Temp = inw(devpriv->iobase + APCI1516_DIGITAL_OP);
-
- } /* if(devpriv->b_OutputMemoryStatus ) */
- else {
- ui_Temp = 0;
- } /* if(devpriv->b_OutputMemoryStatus ) */
- if (data[3] == 0) {
- if (data[1] == 0) {
- data[0] = (data[0] << ui_NoOfChannel) | ui_Temp;
- outw(data[0], devpriv->iobase + APCI1516_DIGITAL_OP);
-
- printk("EL311003 : d=%d @=%x\n", data[0],
- devpriv->iobase + APCI1516_DIGITAL_OP);
-
- } /* if(data[1]==0) */
- else {
- if (data[1] == 1) {
- switch (ui_NoOfChannel) {
-
- case 2:
- data[0] =
- (data[0] << (2 *
- data[2])) | ui_Temp;
- break;
-
- case 4:
- data[0] =
- (data[0] << (4 *
- data[2])) | ui_Temp;
- break;
-
- case 7:
- data[0] = data[0] | ui_Temp;
- break;
-
- default:
- comedi_error(dev, " chan spec wrong");
- return -EINVAL; /* "sorry channel spec wrong " */
-
- } /* switch(ui_NoOfChannels) */
-
- outw(data[0],
- devpriv->iobase + APCI1516_DIGITAL_OP);
-
- printk("EL311003 : d=%d @=%x\n", data[0],
- devpriv->iobase + APCI1516_DIGITAL_OP);
- } /* if(data[1]==1) */
- else {
- printk("\nSpecified channel not supported\n");
- } /* else if(data[1]==1) */
- } /* elseif(data[1]==0) */
- } /* if(data[3]==0) */
- else {
- if (data[3] == 1) {
- if (data[1] == 0) {
- data[0] = ~data[0] & 0x1;
- ui_Temp1 = 1;
- ui_Temp1 = ui_Temp1 << ui_NoOfChannel;
- ui_Temp = ui_Temp | ui_Temp1;
- data[0] = (data[0] << ui_NoOfChannel) ^ 0xff;
- data[0] = data[0] & ui_Temp;
- outw(data[0],
- devpriv->iobase + APCI1516_DIGITAL_OP);
-
- printk("EL311003 : d=%d @=%x\n", data[0],
- devpriv->iobase + APCI1516_DIGITAL_OP);
-
- } /* if(data[1]==0) */
- else {
- if (data[1] == 1) {
- switch (ui_NoOfChannel) {
-
- case 2:
- data[0] = ~data[0] & 0x3;
- ui_Temp1 = 3;
- ui_Temp1 =
- ui_Temp1 << 2 * data[2];
- ui_Temp = ui_Temp | ui_Temp1;
- data[0] =
- ((data[0] << (2 *
- data
- [2])) ^
- 0xff) & ui_Temp;
- break;
-
- case 4:
- data[0] = ~data[0] & 0xf;
- ui_Temp1 = 15;
- ui_Temp1 =
- ui_Temp1 << 4 * data[2];
- ui_Temp = ui_Temp | ui_Temp1;
- data[0] =
- ((data[0] << (4 *
- data
- [2])) ^
- 0xff) & ui_Temp;
- break;
-
- case 7:
- break;
-
- default:
- comedi_error(dev,
- " chan spec wrong");
- return -EINVAL; /* "sorry channel spec wrong " */
-
- } /* switch(ui_NoOfChannels) */
-
- outw(data[0],
- devpriv->iobase +
- APCI1516_DIGITAL_OP);
-
- printk("EL311003 : d=%d @=%x\n",
- data[0],
- devpriv->iobase +
- APCI1516_DIGITAL_OP);
- } /* if(data[1]==1) */
- else {
- printk("\nSpecified channel not supported\n");
- } /* else if(data[1]==1) */
- } /* elseif(data[1]==0) */
- } /* if(data[3]==1); */
- else {
- printk("\nSpecified functionality does not exist\n");
- return -EINVAL;
- } /* if else data[3]==1) */
- } /* if else data[3]==0) */
- return (insn->n);
-}
-
-/*
-+----------------------------------------------------------------------------+
-| Function Name : int i_APCI1516_ReadDigitalOutput |
-| (struct comedi_device *dev,struct comedi_subdevice *s,struct comedi_insn *insn,
-| unsigned int *data) |
-+----------------------------------------------------------------------------+
-| Task : Read value of the selected channel or port |
-+----------------------------------------------------------------------------+
-| Input Parameters : struct comedi_device *dev : Driver handle |
-| struct comedi_subdevice *s, :pointer to subdevice structure
-| struct comedi_insn *insn :pointer to insn structure |
-| unsigned int *data : Data Pointer to read status |
-+----------------------------------------------------------------------------+
-| Output Parameters : -- |
-+----------------------------------------------------------------------------+
-| Return Value : TRUE : No error occur |
-| : FALSE : Error occur. Return the error |
-| |
-+----------------------------------------------------------------------------+
-*/
-
-int i_APCI1516_ReadDigitalOutput(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data)
-{
-
- unsigned int ui_Temp;
- unsigned int ui_NoOfChannel = CR_CHAN(insn->chanspec); /* get the channel */
- ui_Temp = data[0];
- *data = inw(devpriv->iobase + APCI1516_DIGITAL_OP_RW);
- if (ui_Temp == 0) {
- *data = (*data >> ui_NoOfChannel) & 0x1;
- } /* if(ui_Temp==0) */
- else {
- if (ui_Temp == 1) {
- switch (ui_NoOfChannel) {
-
- case 2:
- *data = (*data >> (2 * data[1])) & 3;
- break;
-
- case 4:
- *data = (*data >> (4 * data[1])) & 15;
- break;
-
- case 7:
- break;
-
- default:
- comedi_error(dev, " chan spec wrong");
- return -EINVAL; /* "sorry channel spec wrong " */
-
- } /* switch(ui_NoOfChannels) */
- } /* if(ui_Temp==1) */
- else {
- printk("\nSpecified channel not supported \n");
- } /* elseif(ui_Temp==1) */
- } /* elseif(ui_Temp==0) */
- return insn->n;
-}
-
-/*
-+----------------------------------------------------------------------------+
-| Function Name : int i_APCI1516_ConfigWatchdog(struct comedi_device *dev,
-| struct comedi_subdevice *s,struct comedi_insn *insn,unsigned int *data) |
-| |
-+----------------------------------------------------------------------------+
-| Task : Configures The Watchdog |
-+----------------------------------------------------------------------------+
-| Input Parameters : struct comedi_device *dev : Driver handle |
-| struct comedi_subdevice *s, :pointer to subdevice structure
-| struct comedi_insn *insn :pointer to insn structure |
-| unsigned int *data : Data Pointer to read status |
-+----------------------------------------------------------------------------+
-| Output Parameters : -- |
-+----------------------------------------------------------------------------+
-| Return Value : TRUE : No error occur |
-| : FALSE : Error occur. Return the error |
-| |
-+----------------------------------------------------------------------------+
-*/
-
-int i_APCI1516_ConfigWatchdog(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data)
-{
- if (data[0] == 0) {
- /* Disable the watchdog */
- outw(0x0,
- devpriv->i_IobaseAddon +
- APCI1516_WATCHDOG_ENABLEDISABLE);
- /* Loading the Reload value */
- outw(data[1],
- devpriv->i_IobaseAddon +
- APCI1516_WATCHDOG_RELOAD_VALUE);
- data[1] = data[1] >> 16;
- outw(data[1],
- devpriv->i_IobaseAddon +
- APCI1516_WATCHDOG_RELOAD_VALUE + 2);
- } /* if(data[0]==0) */
- else {
- printk("\nThe input parameters are wrong\n");
- return -EINVAL;
- } /* elseif(data[0]==0) */
-
- return insn->n;
-}
-
- /*
- +----------------------------------------------------------------------------+
- | Function Name : int i_APCI1516_StartStopWriteWatchdog |
- | (struct comedi_device *dev,struct comedi_subdevice *s,
- struct comedi_insn *insn,unsigned int *data); |
- +----------------------------------------------------------------------------+
- | Task : Start / Stop The Watchdog |
- +----------------------------------------------------------------------------+
- | Input Parameters : struct comedi_device *dev : Driver handle |
- | struct comedi_subdevice *s, :pointer to subdevice structure
- struct comedi_insn *insn :pointer to insn structure |
- | unsigned int *data : Data Pointer to read status |
- +----------------------------------------------------------------------------+
- | Output Parameters : -- |
- +----------------------------------------------------------------------------+
- | Return Value : TRUE : No error occur |
- | : FALSE : Error occur. Return the error |
- | |
- +----------------------------------------------------------------------------+
- */
-
-int i_APCI1516_StartStopWriteWatchdog(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data)
-{
- switch (data[0]) {
- case 0: /* stop the watchdog */
- outw(0x0, devpriv->i_IobaseAddon + APCI1516_WATCHDOG_ENABLEDISABLE); /* disable the watchdog */
- break;
- case 1: /* start the watchdog */
- outw(0x0001,
- devpriv->i_IobaseAddon +
- APCI1516_WATCHDOG_ENABLEDISABLE);
- break;
- case 2: /* Software trigger */
- outw(0x0201,
- devpriv->i_IobaseAddon +
- APCI1516_WATCHDOG_ENABLEDISABLE);
- break;
- default:
- printk("\nSpecified functionality does not exist\n");
- return -EINVAL;
- } /* switch(data[0]) */
- return insn->n;
-}
-
-/*
-+----------------------------------------------------------------------------+
-| Function Name : int i_APCI1516_ReadWatchdog |
-| (struct comedi_device *dev,struct comedi_subdevice *s,struct comedi_insn *insn,
- unsigned int *data); |
-+----------------------------------------------------------------------------+
-| Task : Read The Watchdog |
-+----------------------------------------------------------------------------+
-| Input Parameters : struct comedi_device *dev : Driver handle |
-| struct comedi_subdevice *s, :pointer to subdevice structure
- struct comedi_insn *insn :pointer to insn structure |
-| unsigned int *data : Data Pointer to read status |
-+----------------------------------------------------------------------------+
-| Output Parameters : -- |
-+----------------------------------------------------------------------------+
-| Return Value : TRUE : No error occur |
-| : FALSE : Error occur. Return the error |
-| |
-+----------------------------------------------------------------------------+
-*/
-
-int i_APCI1516_ReadWatchdog(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data)
-{
- data[0] = inw(devpriv->i_IobaseAddon + APCI1516_WATCHDOG_STATUS) & 0x1;
- return insn->n;
-}
-
-/*
-+----------------------------------------------------------------------------+
-| Function Name : int i_APCI1516_Reset(struct comedi_device *dev) | |
-+----------------------------------------------------------------------------+
-| Task :resets all the registers |
-+----------------------------------------------------------------------------+
-| Input Parameters : struct comedi_device *dev
-+----------------------------------------------------------------------------+
-| Output Parameters : -- |
-+----------------------------------------------------------------------------+
-| Return Value : |
-| |
-+----------------------------------------------------------------------------+
-*/
-
-int i_APCI1516_Reset(struct comedi_device *dev)
-{
- outw(0x0, devpriv->iobase + APCI1516_DIGITAL_OP); /* RESETS THE DIGITAL OUTPUTS */
- outw(0x0, devpriv->i_IobaseAddon + APCI1516_WATCHDOG_ENABLEDISABLE);
- outw(0x0, devpriv->i_IobaseAddon + APCI1516_WATCHDOG_RELOAD_VALUE);
- outw(0x0, devpriv->i_IobaseAddon + APCI1516_WATCHDOG_RELOAD_VALUE + 2);
- return 0;
-}
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1516.h b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1516.h
deleted file mode 100644
index 4472829..0000000
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1516.h
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module.
- *
- * ADDI-DATA GmbH
- * Dieselstrasse 3
- * D-77833 Ottersweier
- * Tel: +19(0)7223/9493-0
- * Fax: +49(0)7223/9493-92
- * http://www.addi-data.com
- * info@addi-data.com
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 of the License, or (at your option)
- * any later version.
- */
-
-/********* Definitions for APCI-1516 card *****/
-
-/* Card Specific information */
-#define APCI1516_BOARD_VENDOR_ID 0x15B8
-#define APCI1516_ADDRESS_RANGE 8
-
-/* DIGITAL INPUT-OUTPUT DEFINE */
-
-#define APCI1516_DIGITAL_OP 4
-#define APCI1516_DIGITAL_OP_RW 4
-#define APCI1516_DIGITAL_IP 0
-
-/* TIMER COUNTER WATCHDOG DEFINES */
-
-#define ADDIDATA_WATCHDOG 2
-#define APCI1516_DIGITAL_OP_WATCHDOG 0
-#define APCI1516_WATCHDOG_ENABLEDISABLE 12
-#define APCI1516_WATCHDOG_RELOAD_VALUE 4
-#define APCI1516_WATCHDOG_STATUS 16
-
-/* Hardware Layer functions for Apci1516 */
-
-/* Digital Input */
-int i_APCI1516_ReadMoreDigitalInput(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-int i_APCI1516_Read1DigitalInput(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-
-/* Digital Output */
-int i_APCI1516_ConfigDigitalOutput(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-int i_APCI1516_WriteDigitalOutput(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-int i_APCI1516_ReadDigitalOutput(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-
-/*
-* TIMER timer value is passed as u seconds
-*/
-int i_APCI1516_ConfigWatchdog(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-int i_APCI1516_StartStopWriteWatchdog(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-int i_APCI1516_ReadWatchdog(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-
-/* reset */
-int i_APCI1516_Reset(struct comedi_device *dev);
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1564.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1564.c
index 5b92e45..fc31c4b 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1564.c
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1564.c
@@ -46,14 +46,62 @@
+----------+-----------+------------------------------------------------+
*/
-/*
-+----------------------------------------------------------------------------+
-| Included files |
-+----------------------------------------------------------------------------+
-*/
+/********* Definitions for APCI-1564 card *****/
-#include <linux/delay.h>
-#include "hwdrv_apci1564.h"
+#define APCI1564_ADDRESS_RANGE 128
+
+/* DIGITAL INPUT-OUTPUT DEFINE */
+/* Input defines */
+#define APCI1564_DIGITAL_IP 0x04
+#define APCI1564_DIGITAL_IP_INTERRUPT_MODE1 4
+#define APCI1564_DIGITAL_IP_INTERRUPT_MODE2 8
+#define APCI1564_DIGITAL_IP_IRQ 16
+
+/* Output defines */
+#define APCI1564_DIGITAL_OP 0x18
+#define APCI1564_DIGITAL_OP_RW 0
+#define APCI1564_DIGITAL_OP_INTERRUPT 4
+#define APCI1564_DIGITAL_OP_IRQ 12
+
+/* Digital Input IRQ Function Selection */
+#define ADDIDATA_OR 0
+#define ADDIDATA_AND 1
+
+/* Digital Input Interrupt Status */
+#define APCI1564_DIGITAL_IP_INTERRUPT_STATUS 12
+
+/* Digital Output Interrupt Status */
+#define APCI1564_DIGITAL_OP_INTERRUPT_STATUS 8
+
+/* Digital Input Interrupt Enable Disable. */
+#define APCI1564_DIGITAL_IP_INTERRUPT_ENABLE 0x4
+#define APCI1564_DIGITAL_IP_INTERRUPT_DISABLE 0xfffffffb
+
+/* Digital Output Interrupt Enable Disable. */
+#define APCI1564_DIGITAL_OP_VCC_INTERRUPT_ENABLE 0x1
+#define APCI1564_DIGITAL_OP_VCC_INTERRUPT_DISABLE 0xfffffffe
+#define APCI1564_DIGITAL_OP_CC_INTERRUPT_ENABLE 0x2
+#define APCI1564_DIGITAL_OP_CC_INTERRUPT_DISABLE 0xfffffffd
+
+/* TIMER COUNTER WATCHDOG DEFINES */
+
+#define ADDIDATA_TIMER 0
+#define ADDIDATA_COUNTER 1
+#define ADDIDATA_WATCHDOG 2
+#define APCI1564_DIGITAL_OP_WATCHDOG 0x28
+#define APCI1564_TIMER 0x48
+#define APCI1564_COUNTER1 0x0
+#define APCI1564_COUNTER2 0x20
+#define APCI1564_COUNTER3 0x40
+#define APCI1564_COUNTER4 0x60
+#define APCI1564_TCW_SYNC_ENABLEDISABLE 0
+#define APCI1564_TCW_RELOAD_VALUE 4
+#define APCI1564_TCW_TIMEBASE 8
+#define APCI1564_TCW_PROG 12
+#define APCI1564_TCW_TRIG_STATUS 16
+#define APCI1564_TCW_IRQ 20
+#define APCI1564_TCW_WARN_TIMEVAL 24
+#define APCI1564_TCW_WARN_TIMEBASE 28
/* Global variables */
static unsigned int ui_InterruptStatus_1564 = 0;
@@ -86,9 +134,13 @@
| |
+----------------------------------------------------------------------------+
*/
-int i_APCI1564_ConfigDigitalInput(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data)
+static int i_APCI1564_ConfigDigitalInput(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
{
+ struct addi_private *devpriv = dev->private;
+
devpriv->tsk_Current = current;
/*******************************/
/* Set the digital input logic */
@@ -128,107 +180,15 @@
return insn->n;
}
-/*
-+----------------------------------------------------------------------------+
-| Function Name : int i_APCI1564_Read1DigitalInput |
-| (struct comedi_device *dev,struct comedi_subdevice *s, |
-| struct comedi_insn *insn,unsigned int *data) |
-+----------------------------------------------------------------------------+
-| Task : Return the status of the digital input |
-+----------------------------------------------------------------------------+
-| Input Parameters : struct comedi_device *dev : Driver handle |
-| unsigned int ui_Channel : Channel number to read |
-| unsigned int *data : Data Pointer to read status |
-+----------------------------------------------------------------------------+
-| Output Parameters : -- |
-+----------------------------------------------------------------------------+
-| Return Value : TRUE : No error occur |
-| : FALSE : Error occur. Return the error |
-| |
-+----------------------------------------------------------------------------+
-*/
-int i_APCI1564_Read1DigitalInput(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data)
+static int apci1564_di_insn_bits(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
{
- unsigned int ui_TmpValue = 0;
- unsigned int ui_Channel;
+ struct addi_private *devpriv = dev->private;
- ui_Channel = CR_CHAN(insn->chanspec);
- if (ui_Channel <= 31) {
- ui_TmpValue =
- (unsigned int) inl(devpriv->i_IobaseAmcc + APCI1564_DIGITAL_IP);
-/*
-* since only 1 channel reqd to bring it to last bit it is rotated 8
-* +(chan - 1) times then ANDed with 1 for last bit.
-*/
- *data = (ui_TmpValue >> ui_Channel) & 0x1;
- } /* if (ui_Channel >= 0 && ui_Channel <=31) */
- else {
- comedi_error(dev, "Not a valid channel number !!! \n");
- return -EINVAL; /* "sorry channel spec wrong " */
- } /* else if (ui_Channel >= 0 && ui_Channel <=31) */
- return insn->n;
-}
+ data[1] = inl(devpriv->i_IobaseAmcc + APCI1564_DIGITAL_IP);
-/*
-+----------------------------------------------------------------------------+
-| Function Name : int i_APCI1564_ReadMoreDigitalInput |
-| (struct comedi_device *dev,struct comedi_subdevice *s, |
-| struct comedi_insn *insn,unsigned int *data) |
-+----------------------------------------------------------------------------+
-| Task : Return the status of the Requested digital inputs |
-+----------------------------------------------------------------------------+
-| Input Parameters : struct comedi_device *dev : Driver handle |
-| unsigned int ui_NoOfChannels : No Of Channels To be Read |
-| unsigned int *data : Data Pointer to read status |
-+----------------------------------------------------------------------------+
-| Output Parameters : -- |
-+----------------------------------------------------------------------------+
-| Return Value : TRUE : No error occur |
-| : FALSE : Error occur. Return the error |
-| |
-+----------------------------------------------------------------------------+
-*/
-int i_APCI1564_ReadMoreDigitalInput(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data)
-{
- unsigned int ui_PortValue = data[0];
- unsigned int ui_Mask = 0;
- unsigned int ui_NoOfChannels;
-
- ui_NoOfChannels = CR_CHAN(insn->chanspec);
- if (data[1] == 0) {
- *data = (unsigned int) inl(devpriv->i_IobaseAmcc + APCI1564_DIGITAL_IP);
- switch (ui_NoOfChannels) {
- case 2:
- ui_Mask = 3;
- *data = (*data >> (2 * ui_PortValue)) & ui_Mask;
- break;
- case 4:
- ui_Mask = 15;
- *data = (*data >> (4 * ui_PortValue)) & ui_Mask;
- break;
- case 8:
- ui_Mask = 255;
- *data = (*data >> (8 * ui_PortValue)) & ui_Mask;
- break;
- case 16:
- ui_Mask = 65535;
- *data = (*data >> (16 * ui_PortValue)) & ui_Mask;
- break;
- case 31:
- break;
- default:
- comedi_error(dev, "Not a valid Channel number !!!\n");
- return -EINVAL; /* "sorry channel spec wrong " */
- break;
- } /* switch (ui_NoOfChannels) */
- } /* if (data[1]==0) */
- else {
- if (data[1] == 1) {
- *data = ui_InterruptStatus_1564;
- } /* if (data[1]==1) */
- } /* else if (data[1]==0) */
return insn->n;
}
@@ -257,9 +217,12 @@
| |
+----------------------------------------------------------------------------+
*/
-int i_APCI1564_ConfigDigitalOutput(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data)
+static int i_APCI1564_ConfigDigitalOutput(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
{
+ struct addi_private *devpriv = dev->private;
unsigned int ul_Command = 0;
if ((data[0] != 0) && (data[0] != 1)) {
@@ -295,244 +258,27 @@
return insn->n;
}
-/*
-+----------------------------------------------------------------------------+
-| Function Name : int i_APCI1564_WriteDigitalOutput |
-| (struct comedi_device *dev,struct comedi_subdevice *s, |
-| struct comedi_insn *insn,unsigned int *data) |
-+----------------------------------------------------------------------------+
-| Task : Writes port value To the selected port |
-+----------------------------------------------------------------------------+
-| Input Parameters : struct comedi_device *dev : Driver handle |
-| unsigned int ui_NoOfChannels : No Of Channels To Write |
-| unsigned int *data : Data Pointer to read status |
-+----------------------------------------------------------------------------+
-| Output Parameters : -- |
-+----------------------------------------------------------------------------+
-| Return Value : TRUE : No error occur |
-| : FALSE : Error occur. Return the error |
-| |
-+----------------------------------------------------------------------------+
-*/
-int i_APCI1564_WriteDigitalOutput(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data)
+static int apci1564_do_insn_bits(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
{
- unsigned int ui_Temp, ui_Temp1;
- unsigned int ui_NoOfChannel;
+ struct addi_private *devpriv = dev->private;
+ unsigned int mask = data[0];
+ unsigned int bits = data[1];
- ui_NoOfChannel = CR_CHAN(insn->chanspec);
- if (devpriv->b_OutputMemoryStatus) {
- ui_Temp =
- inl(devpriv->i_IobaseAmcc + APCI1564_DIGITAL_OP +
+ s->state = inl(devpriv->i_IobaseAmcc + APCI1564_DIGITAL_OP +
APCI1564_DIGITAL_OP_RW);
- } /* if (devpriv->b_OutputMemoryStatus ) */
- else {
- ui_Temp = 0;
- } /* else if (devpriv->b_OutputMemoryStatus ) */
- if (data[3] == 0) {
- if (data[1] == 0) {
- data[0] = (data[0] << ui_NoOfChannel) | ui_Temp;
- outl(data[0],
- devpriv->i_IobaseAmcc + APCI1564_DIGITAL_OP +
- APCI1564_DIGITAL_OP_RW);
- } /* if (data[1]==0) */
- else {
- if (data[1] == 1) {
- switch (ui_NoOfChannel) {
- case 2:
- data[0] =
- (data[0] << (2 *
- data[2])) | ui_Temp;
- break;
- case 4:
- data[0] =
- (data[0] << (4 *
- data[2])) | ui_Temp;
- break;
- case 8:
- data[0] =
- (data[0] << (8 *
- data[2])) | ui_Temp;
- break;
- case 16:
- data[0] =
- (data[0] << (16 *
- data[2])) | ui_Temp;
- break;
- case 31:
- data[0] = data[0] | ui_Temp;
- break;
- default:
- comedi_error(dev, " chan spec wrong");
- return -EINVAL; /* "sorry channel spec wrong " */
- } /* switch (ui_NoOfChannels) */
- outl(data[0],
- devpriv->i_IobaseAmcc +
- APCI1564_DIGITAL_OP +
- APCI1564_DIGITAL_OP_RW);
- } /* if (data[1]==1) */
- else {
- printk("\nSpecified channel not supported\n");
- } /* else if (data[1]==1) */
- } /* else if (data[1]==0) */
- } /* if(data[3]==0) */
- else {
- if (data[3] == 1) {
- if (data[1] == 0) {
- data[0] = ~data[0] & 0x1;
- ui_Temp1 = 1;
- ui_Temp1 = ui_Temp1 << ui_NoOfChannel;
- ui_Temp = ui_Temp | ui_Temp1;
- data[0] =
- (data[0] << ui_NoOfChannel) ^
- 0xffffffff;
- data[0] = data[0] & ui_Temp;
- outl(data[0],
- devpriv->i_IobaseAmcc +
- APCI1564_DIGITAL_OP +
- APCI1564_DIGITAL_OP_RW);
- } /* if (data[1]==0) */
- else {
- if (data[1] == 1) {
- switch (ui_NoOfChannel) {
- case 2:
- data[0] = ~data[0] & 0x3;
- ui_Temp1 = 3;
- ui_Temp1 =
- ui_Temp1 << 2 * data[2];
- ui_Temp = ui_Temp | ui_Temp1;
- data[0] =
- ((data[0] << (2 *
- data
- [2])) ^
- 0xffffffff) & ui_Temp;
- break;
- case 4:
- data[0] = ~data[0] & 0xf;
- ui_Temp1 = 15;
- ui_Temp1 =
- ui_Temp1 << 4 * data[2];
- ui_Temp = ui_Temp | ui_Temp1;
- data[0] =
- ((data[0] << (4 *
- data
- [2])) ^
- 0xffffffff) & ui_Temp;
- break;
- case 8:
- data[0] = ~data[0] & 0xff;
- ui_Temp1 = 255;
- ui_Temp1 =
- ui_Temp1 << 8 * data[2];
- ui_Temp = ui_Temp | ui_Temp1;
- data[0] =
- ((data[0] << (8 *
- data
- [2])) ^
- 0xffffffff) & ui_Temp;
- break;
- case 16:
- data[0] = ~data[0] & 0xffff;
- ui_Temp1 = 65535;
- ui_Temp1 =
- ui_Temp1 << 16 *
- data[2];
- ui_Temp = ui_Temp | ui_Temp1;
- data[0] =
- ((data[0] << (16 *
- data
- [2])) ^
- 0xffffffff) & ui_Temp;
- break;
- case 31:
- break;
- default:
- comedi_error(dev,
- " chan spec wrong");
- return -EINVAL; /* "sorry channel spec wrong " */
- } /* switch(ui_NoOfChannels) */
- outl(data[0],
- devpriv->i_IobaseAmcc +
- APCI1564_DIGITAL_OP +
- APCI1564_DIGITAL_OP_RW);
- } /* if (data[1]==1) */
- else {
- printk("\nSpecified channel not supported\n");
- } /* else if (data[1]==1) */
- } /* else if (data[1]==0) */
- } /* if (data[3]==1); */
- else {
- printk("\nSpecified functionality does not exist\n");
- return -EINVAL;
- } /* else if (data[3]==1) */
- } /* else if (data[3]==0) */
- return insn->n;
-}
+ if (mask) {
+ s->state &= ~mask;
+ s->state |= (bits & mask);
-/*
-+----------------------------------------------------------------------------+
-| Function Name : int i_APCI1564_ReadDigitalOutput |
-| (struct comedi_device *dev,struct comedi_subdevice *s, |
-| struct comedi_insn *insn,unsigned int *data) |
-+----------------------------------------------------------------------------+
-| Task : Read value of the selected channel or port |
-+----------------------------------------------------------------------------+
-| Input Parameters : struct comedi_device *dev : Driver handle |
-| unsigned int ui_NoOfChannels : No Of Channels To read |
-| unsigned int *data : Data Pointer to read status |
-+----------------------------------------------------------------------------+
-| Output Parameters : -- |
-+----------------------------------------------------------------------------+
-| Return Value : TRUE : No error occur |
-| : FALSE : Error occur. Return the error |
-| |
-+----------------------------------------------------------------------------+
-*/
-int i_APCI1564_ReadDigitalOutput(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data)
-{
- unsigned int ui_Temp;
- unsigned int ui_NoOfChannel;
+ outl(s->state, devpriv->i_IobaseAmcc + APCI1564_DIGITAL_OP +
+ APCI1564_DIGITAL_OP_RW);
+ }
- ui_NoOfChannel = CR_CHAN(insn->chanspec);
- ui_Temp = data[0];
- *data = inl(devpriv->i_IobaseAmcc + APCI1564_DIGITAL_OP +
- APCI1564_DIGITAL_OP_RW);
- if (ui_Temp == 0) {
- *data = (*data >> ui_NoOfChannel) & 0x1;
- } /* if (ui_Temp==0) */
- else {
- if (ui_Temp == 1) {
- switch (ui_NoOfChannel) {
- case 2:
- *data = (*data >> (2 * data[1])) & 3;
- break;
+ data[1] = s->state;
- case 4:
- *data = (*data >> (4 * data[1])) & 15;
- break;
-
- case 8:
- *data = (*data >> (8 * data[1])) & 255;
- break;
-
- case 16:
- *data = (*data >> (16 * data[1])) & 65535;
- break;
-
- case 31:
- break;
-
- default:
- comedi_error(dev, " chan spec wrong");
- return -EINVAL; /* "sorry channel spec wrong " */
- break;
- } /* switch(ui_NoOfChannels) */
- } /* if (ui_Temp==1) */
- else {
- printk("\nSpecified channel not supported \n");
- } /* else if (ui_Temp==1) */
- } /* else if (ui_Temp==0) */
return insn->n;
}
@@ -566,10 +312,14 @@
| |
+----------------------------------------------------------------------------+
*/
-int i_APCI1564_ConfigTimerCounterWatchdog(struct comedi_device *dev,
- struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
+static int i_APCI1564_ConfigTimerCounterWatchdog(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
{
+ struct addi_private *devpriv = dev->private;
unsigned int ul_Command1 = 0;
+
devpriv->tsk_Current = current;
if (data[0] == ADDIDATA_WATCHDOG) {
devpriv->b_TimerSelectMode = ADDIDATA_WATCHDOG;
@@ -720,10 +470,14 @@
| |
+----------------------------------------------------------------------------+
*/
-int i_APCI1564_StartStopWriteTimerCounterWatchdog(struct comedi_device *dev,
- struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
+static int i_APCI1564_StartStopWriteTimerCounterWatchdog(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
{
+ struct addi_private *devpriv = dev->private;
unsigned int ul_Command1 = 0;
+
if (devpriv->b_TimerSelectMode == ADDIDATA_WATCHDOG) {
switch (data[1]) {
case 0: /* stop the watchdog */
@@ -815,9 +569,12 @@
| |
+----------------------------------------------------------------------------+
*/
-int i_APCI1564_ReadTimerCounterWatchdog(struct comedi_device *dev,
- struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
+static int i_APCI1564_ReadTimerCounterWatchdog(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
{
+ struct addi_private *devpriv = dev->private;
unsigned int ul_Command1 = 0;
if (devpriv->b_TimerSelectMode == ADDIDATA_WATCHDOG) {
@@ -894,8 +651,10 @@
+----------------------------------------------------------------------------+
*/
-int i_APCI1564_ReadInterruptStatus(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data)
+static int i_APCI1564_ReadInterruptStatus(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
{
*data = ui_Type;
return insn->n;
@@ -921,10 +680,12 @@
static void v_APCI1564_Interrupt(int irq, void *d)
{
struct comedi_device *dev = d;
+ struct addi_private *devpriv = dev->private;
unsigned int ui_DO, ui_DI;
unsigned int ui_Timer;
unsigned int ui_C1, ui_C2, ui_C3, ui_C4;
unsigned int ul_Command2 = 0;
+
ui_DI = inl(devpriv->i_IobaseAmcc + APCI1564_DIGITAL_IP +
APCI1564_DIGITAL_IP_IRQ) & 0x01;
ui_DO = inl(devpriv->i_IobaseAmcc + APCI1564_DIGITAL_OP +
@@ -1104,8 +865,10 @@
+----------------------------------------------------------------------------+
*/
-int i_APCI1564_Reset(struct comedi_device *dev)
+static int i_APCI1564_Reset(struct comedi_device *dev)
{
+ struct addi_private *devpriv = dev->private;
+
outl(0x0, devpriv->i_IobaseAmcc + APCI1564_DIGITAL_IP_IRQ); /* disable the interrupts */
inl(devpriv->i_IobaseAmcc + APCI1564_DIGITAL_IP_INTERRUPT_STATUS); /* Reset the interrupt status register */
outl(0x0, devpriv->i_IobaseAmcc + APCI1564_DIGITAL_IP_INTERRUPT_MODE1); /* Disable the and/or interrupt */
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1564.h b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1564.h
deleted file mode 100644
index c91594d..0000000
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1564.h
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module.
- *
- * ADDI-DATA GmbH
- * Dieselstrasse 3
- * D-77833 Ottersweier
- * Tel: +19(0)7223/9493-0
- * Fax: +49(0)7223/9493-92
- * http://www.addi-data.com
- * info@addi-data.com
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 of the License, or (at your option)
- * any later version.
- */
-
-/********* Definitions for APCI-1564 card *****/
-
-#define APCI1564_BOARD_VENDOR_ID 0x15B8
-#define APCI1564_ADDRESS_RANGE 128
-
-/* DIGITAL INPUT-OUTPUT DEFINE */
-/* Input defines */
-#define APCI1564_DIGITAL_IP 0x04
-#define APCI1564_DIGITAL_IP_INTERRUPT_MODE1 4
-#define APCI1564_DIGITAL_IP_INTERRUPT_MODE2 8
-#define APCI1564_DIGITAL_IP_IRQ 16
-
-/* Output defines */
-#define APCI1564_DIGITAL_OP 0x18
-#define APCI1564_DIGITAL_OP_RW 0
-#define APCI1564_DIGITAL_OP_INTERRUPT 4
-#define APCI1564_DIGITAL_OP_IRQ 12
-
-/* Digital Input IRQ Function Selection */
-#define ADDIDATA_OR 0
-#define ADDIDATA_AND 1
-
-/* Digital Input Interrupt Status */
-#define APCI1564_DIGITAL_IP_INTERRUPT_STATUS 12
-
-/* Digital Output Interrupt Status */
-#define APCI1564_DIGITAL_OP_INTERRUPT_STATUS 8
-
-/* Digital Input Interrupt Enable Disable. */
-#define APCI1564_DIGITAL_IP_INTERRUPT_ENABLE 0x4
-#define APCI1564_DIGITAL_IP_INTERRUPT_DISABLE 0xFFFFFFFB
-
-/* Digital Output Interrupt Enable Disable. */
-#define APCI1564_DIGITAL_OP_VCC_INTERRUPT_ENABLE 0x1
-#define APCI1564_DIGITAL_OP_VCC_INTERRUPT_DISABLE 0xFFFFFFFE
-#define APCI1564_DIGITAL_OP_CC_INTERRUPT_ENABLE 0x2
-#define APCI1564_DIGITAL_OP_CC_INTERRUPT_DISABLE 0xFFFFFFFD
-
-/* ADDIDATA Enable Disable */
-
-#define ADDIDATA_ENABLE 1
-#define ADDIDATA_DISABLE 0
-
-/* TIMER COUNTER WATCHDOG DEFINES */
-
-#define ADDIDATA_TIMER 0
-#define ADDIDATA_COUNTER 1
-#define ADDIDATA_WATCHDOG 2
-#define APCI1564_DIGITAL_OP_WATCHDOG 0x28
-#define APCI1564_TIMER 0x48
-#define APCI1564_COUNTER1 0x0
-#define APCI1564_COUNTER2 0x20
-#define APCI1564_COUNTER3 0x40
-#define APCI1564_COUNTER4 0x60
-#define APCI1564_TCW_SYNC_ENABLEDISABLE 0
-#define APCI1564_TCW_RELOAD_VALUE 4
-#define APCI1564_TCW_TIMEBASE 8
-#define APCI1564_TCW_PROG 12
-#define APCI1564_TCW_TRIG_STATUS 16
-#define APCI1564_TCW_IRQ 20
-#define APCI1564_TCW_WARN_TIMEVAL 24
-#define APCI1564_TCW_WARN_TIMEBASE 28
-
-/* Hardware Layer functions for Apci1564 */
-
-/*
-* DI for di read
-*/
-int i_APCI1564_ConfigDigitalInput(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-int i_APCI1564_Read1DigitalInput(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-int i_APCI1564_ReadMoreDigitalInput(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-
-/* DO */
-int i_APCI1564_ConfigDigitalOutput(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-int i_APCI1564_WriteDigitalOutput(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-int i_APCI1564_ReadDigitalOutput(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-int i_APCI1564_ReadInterruptStatus(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-
-/*
-* TIMER timer value is passed as u seconds
-*/
-int i_APCI1564_ConfigTimerCounterWatchdog(struct comedi_device *dev,
- struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-int i_APCI1564_StartStopWriteTimerCounterWatchdog(struct comedi_device *dev,
- struct comedi_subdevice *s,
- struct comedi_insn *insn,
- unsigned int *data);
-int i_APCI1564_ReadTimerCounterWatchdog(struct comedi_device *dev,
- struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-
-/* intERRUPT */
-static void v_APCI1564_Interrupt(int irq, void *d);
-
-/* RESET */
-int i_APCI1564_Reset(struct comedi_device *dev);
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci16xx.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci16xx.c
index 00a088f..5958a9c 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci16xx.c
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci16xx.c
@@ -47,13 +47,24 @@
+-----------------------------------------------------------------------+
*/
-/*
-+----------------------------------------------------------------------------+
-| Included files |
-+----------------------------------------------------------------------------+
-*/
+#ifndef COMEDI_SUBD_TTLIO
+#define COMEDI_SUBD_TTLIO 11 /* Digital Input Output But TTL */
+#endif
-#include "hwdrv_apci16xx.h"
+#define APCI16XX_TTL_INIT 0
+#define APCI16XX_TTL_INITDIRECTION 1
+#define APCI16XX_TTL_OUTPUTMEMORY 2
+
+#define APCI16XX_TTL_READCHANNEL 0
+#define APCI16XX_TTL_READPORT 1
+
+#define APCI16XX_TTL_WRITECHANNEL_ON 0
+#define APCI16XX_TTL_WRITECHANNEL_OFF 1
+#define APCI16XX_TTL_WRITEPORT_ON 2
+#define APCI16XX_TTL_WRITEPORT_OFF 3
+
+#define APCI16XX_TTL_READ_ALL_INPUTS 0
+#define APCI16XX_TTL_READ_ALL_OUTPUTS 1
/*
+----------------------------------------------------------------------------+
@@ -90,9 +101,13 @@
+----------------------------------------------------------------------------+
*/
-int i_APCI16XX_InsnConfigInitTTLIO(struct comedi_device *dev,
- struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
+static int i_APCI16XX_InsnConfigInitTTLIO(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
{
+ const struct addi_board *this_board = comedi_board(dev);
+ struct addi_private *devpriv = dev->private;
int i_ReturnValue = insn->n;
unsigned char b_Command = 0;
unsigned char b_Cpt = 0;
@@ -283,9 +298,13 @@
+----------------------------------------------------------------------------+
*/
-int i_APCI16XX_InsnBitsReadTTLIO(struct comedi_device *dev,
- struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
+static int i_APCI16XX_InsnBitsReadTTLIO(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
{
+ const struct addi_board *this_board = comedi_board(dev);
+ struct addi_private *devpriv = dev->private;
int i_ReturnValue = insn->n;
unsigned char b_Command = 0;
unsigned char b_NumberOfPort =
@@ -430,9 +449,13 @@
+----------------------------------------------------------------------------+
*/
-int i_APCI16XX_InsnReadTTLIOAllPortValue(struct comedi_device *dev,
- struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
+static int i_APCI16XX_InsnReadTTLIOAllPortValue(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
{
+ const struct addi_board *this_board = comedi_board(dev);
+ struct addi_private *devpriv = dev->private;
unsigned char b_Command = (unsigned char) CR_AREF(insn->chanspec);
int i_ReturnValue = insn->n;
unsigned char b_Cpt = 0;
@@ -570,9 +593,13 @@
+----------------------------------------------------------------------------+
*/
-int i_APCI16XX_InsnBitsWriteTTLIO(struct comedi_device *dev,
- struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
+static int i_APCI16XX_InsnBitsWriteTTLIO(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
{
+ const struct addi_board *this_board = comedi_board(dev);
+ struct addi_private *devpriv = dev->private;
int i_ReturnValue = insn->n;
unsigned char b_Command = 0;
unsigned char b_NumberOfPort =
@@ -774,7 +801,7 @@
+----------------------------------------------------------------------------+
*/
-int i_APCI16XX_Reset(struct comedi_device *dev)
+static int i_APCI16XX_Reset(struct comedi_device *dev)
{
return 0;
}
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci16xx.h b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci16xx.h
deleted file mode 100644
index a12df4b..0000000
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci16xx.h
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module.
- *
- * ADDI-DATA GmbH
- * Dieselstrasse 3
- * D-77833 Ottersweier
- * Tel: +19(0)7223/9493-0
- * Fax: +49(0)7223/9493-92
- * http://www.addi-data-com
- * info@addi-data.com
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 of the License, or (at your option)
- * any later version.
- */
-
-#ifndef COMEDI_SUBD_TTLIO
-#define COMEDI_SUBD_TTLIO 11 /* Digital Input Output But TTL */
-#endif
-
-#ifndef ADDIDATA_ENABLE
-#define ADDIDATA_ENABLE 1
-#define ADDIDATA_DISABLE 0
-#endif
-
-#define APCI16XX_TTL_INIT 0
-#define APCI16XX_TTL_INITDIRECTION 1
-#define APCI16XX_TTL_OUTPUTMEMORY 2
-
-#define APCI16XX_TTL_READCHANNEL 0
-#define APCI16XX_TTL_READPORT 1
-
-#define APCI16XX_TTL_WRITECHANNEL_ON 0
-#define APCI16XX_TTL_WRITECHANNEL_OFF 1
-#define APCI16XX_TTL_WRITEPORT_ON 2
-#define APCI16XX_TTL_WRITEPORT_OFF 3
-
-#define APCI16XX_TTL_READ_ALL_INPUTS 0
-#define APCI16XX_TTL_READ_ALL_OUTPUTS 1
-
-#ifdef __KERNEL__
-
-/*
-+----------------------------------------------------------------------------+
-| TTL INISIALISATION FUNCTION |
-+----------------------------------------------------------------------------+
-*/
-
-int i_APCI16XX_InsnConfigInitTTLIO(struct comedi_device *dev,
- struct comedi_subdevice *s, struct comedi_insn *insn,
- unsigned int *data);
-
-/*
-+----------------------------------------------------------------------------+
-| TTL INPUT FUNCTION |
-+----------------------------------------------------------------------------+
-*/
-
-int i_APCI16XX_InsnBitsReadTTLIO(struct comedi_device *dev,
- struct comedi_subdevice *s, struct comedi_insn *insn,
- unsigned int *data);
-
-int i_APCI16XX_InsnReadTTLIOAllPortValue(struct comedi_device *dev,
- struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-
-/*
-+----------------------------------------------------------------------------+
-| TTL OUTPUT FUNCTIONS |
-+----------------------------------------------------------------------------+
-*/
-
-int i_APCI16XX_InsnBitsWriteTTLIO(struct comedi_device *dev,
- struct comedi_subdevice *s, struct comedi_insn *insn,
- unsigned int *data);
-
-int i_APCI16XX_Reset(struct comedi_device *dev);
-#endif
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2016.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2016.c
deleted file mode 100644
index 49dcbe2..0000000
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2016.c
+++ /dev/null
@@ -1,460 +0,0 @@
-/**
-@verbatim
-
-Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module.
-
- ADDI-DATA GmbH
- Dieselstrasse 3
- D-77833 Ottersweier
- Tel: +19(0)7223/9493-0
- Fax: +49(0)7223/9493-92
- http://www.addi-data.com
- info@addi-data.com
-
-This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
-
-This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-
-You should also find the complete GPL in the COPYING file accompanying this source code.
-
-@endverbatim
-*/
-/*
-
- +-----------------------------------------------------------------------+
- | (C) ADDI-DATA GmbH Dieselstraße 3 D-77833 Ottersweier |
- +-----------------------------------------------------------------------+
- | Tel : +49 (0) 7223/9493-0 | email : info@addi-data.com |
- | Fax : +49 (0) 7223/9493-92 | Internet : http://www.addi-data.com |
- +-------------------------------+---------------------------------------+
- | Project : APCI-2016 | Compiler : GCC |
- | Module name : hwdrv_apci2016.c| Version : 2.96 |
- +-------------------------------+---------------------------------------+
- | Project manager: Eric Stolz | Date : 02/12/2002 |
- +-------------------------------+---------------------------------------+
- | Description : Hardware Layer Access For APCI-2016 |
- +-----------------------------------------------------------------------+
- | UPDATES |
- +----------+-----------+------------------------------------------------+
- | Date | Author | Description of updates |
- +----------+-----------+------------------------------------------------+
- | | | |
- | | | |
- | | | |
- +----------+-----------+------------------------------------------------+
-*/
-
-/*
-+----------------------------------------------------------------------------+
-| Included files |
-+----------------------------------------------------------------------------+
-*/
-#include "hwdrv_apci2016.h"
-
-/*
-+----------------------------------------------------------------------------+
-| Function Name : int i_APCI2016_ConfigDigitalOutput |
-| (struct comedi_device *dev,struct comedi_subdevice *s, |
-| struct comedi_insn *insn,unsigned int *data) |
-+----------------------------------------------------------------------------+
-| Task : Configures The Digital Output Subdevice. |
-+----------------------------------------------------------------------------+
-| Input Parameters : struct comedi_device *dev : Driver handle |
-| unsigned int *data : Data Pointer contains |
-| configuration parameters as below |
-| |
-| data[0] : 1 Digital Memory On |
-| 0 Digital Memory Off |
-+----------------------------------------------------------------------------+
-| Output Parameters : -- |
-+----------------------------------------------------------------------------+
-| Return Value : TRUE : No error occur |
-| : FALSE : Error occur. Return the error |
-| |
-+----------------------------------------------------------------------------+
-*/
-int i_APCI2016_ConfigDigitalOutput(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data)
-{
- if ((data[0] != 0) && (data[0] != 1)) {
- comedi_error(dev,
- "Not a valid Data !!! ,Data should be 1 or 0\n");
- return -EINVAL;
- } /* if ((data[0]!=0) && (data[0]!=1)) */
- if (data[0]) {
- devpriv->b_OutputMemoryStatus = ADDIDATA_ENABLE;
- } /* if (data[0] */
- else {
- devpriv->b_OutputMemoryStatus = ADDIDATA_DISABLE;
- } /* else if (data[0] */
- return insn->n;
-}
-
-/*
-+----------------------------------------------------------------------------+
-| Function Name : int i_APCI2016_WriteDigitalOutput |
-| (struct comedi_device *dev,struct comedi_subdevice *s, |
-| struct comedi_insn *insn,unsigned int *data) |
-+----------------------------------------------------------------------------+
-| Task : Writes port value To the selected port |
-+----------------------------------------------------------------------------+
-| Input Parameters : struct comedi_device *dev : Driver handle |
-| unsigned int ui_NoOfChannels : No Of Channels To Write |
-| unsigned int *data : Data Pointer to read status |
-+----------------------------------------------------------------------------+
-| Output Parameters : -- |
-+----------------------------------------------------------------------------+
-| Return Value : TRUE : No error occur |
-| : FALSE : Error occur. Return the error |
-| |
-+----------------------------------------------------------------------------+
-*/
-int i_APCI2016_WriteDigitalOutput(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data)
-{
- unsigned int ui_NoOfChannel;
- unsigned int ui_Temp, ui_Temp1;
- ui_NoOfChannel = CR_CHAN(insn->chanspec);
- if (ui_NoOfChannel > 15) {
- comedi_error(dev,
- "Invalid Channel Numbers !!!, Channel Numbers must be between 0 and 15\n");
- return -EINVAL;
- } /* if ((ui_NoOfChannel<0) || (ui_NoOfChannel>15)) */
- if (devpriv->b_OutputMemoryStatus) {
- ui_Temp = inw(devpriv->iobase + APCI2016_DIGITAL_OP);
- } /* if (devpriv->b_OutputMemoryStatus ) */
- else {
- ui_Temp = 0;
- } /* else if (devpriv->b_OutputMemoryStatus ) */
- if ((data[1] != 0) && (data[1] != 1)) {
- comedi_error(dev,
- "Invalid Data[1] value !!!, Data[1] should be 0 or 1\n");
- return -EINVAL;
- } /* if ((data[1]!=0) && (data[1]!=1)) */
-
- if (data[3] == 0) {
- if (data[1] == 0) {
- data[0] = (data[0] << ui_NoOfChannel) | ui_Temp;
- outw(data[0], devpriv->iobase + APCI2016_DIGITAL_OP);
- } /* if (data[1]==0) */
- else {
- if (data[1] == 1) {
- switch (ui_NoOfChannel) {
- case 2:
- data[0] =
- (data[0] << (2 *
- data[2])) | ui_Temp;
- break;
- case 4:
- data[0] =
- (data[0] << (4 *
- data[2])) | ui_Temp;
- break;
- case 8:
- data[0] =
- (data[0] << (8 *
- data[2])) | ui_Temp;
- break;
- case 15:
- data[0] = data[0] | ui_Temp;
- break;
- default:
- comedi_error(dev, " chan spec wrong");
- return -EINVAL; /* "sorry channel spec wrong " */
- } /* switch(ui_NoOfChannels) */
- outw(data[0],
- devpriv->iobase + APCI2016_DIGITAL_OP);
- } /* if (data[1]==1) */
- else {
- printk("\nSpecified channel not supported\n");
- } /* else if (data[1]==1) */
- } /* else if (data[1]==0) */
- } /* if (data[3]==0) */
- else {
- if (data[3] == 1) {
- if (data[1] == 0) {
- data[0] = ~data[0] & 0x1;
- ui_Temp1 = 1;
- ui_Temp1 = ui_Temp1 << ui_NoOfChannel;
- ui_Temp = ui_Temp | ui_Temp1;
- data[0] = (data[0] << ui_NoOfChannel) ^ 0xffff;
- data[0] = data[0] & ui_Temp;
- outw(data[0],
- devpriv->iobase + APCI2016_DIGITAL_OP);
- } /* if (data[1]==0) */
- else {
- if (data[1] == 1) {
- switch (ui_NoOfChannel) {
- case 2:
- data[0] = ~data[0] & 0x3;
- ui_Temp1 = 3;
- ui_Temp1 =
- ui_Temp1 << 2 * data[2];
- ui_Temp = ui_Temp | ui_Temp1;
- data[0] =
- ((data[0] << (2 *
- data
- [2])) ^
- 0xffff) & ui_Temp;
- break;
- case 4:
- data[0] = ~data[0] & 0xf;
- ui_Temp1 = 15;
- ui_Temp1 =
- ui_Temp1 << 4 * data[2];
- ui_Temp = ui_Temp | ui_Temp1;
- data[0] =
- ((data[0] << (4 *
- data
- [2])) ^
- 0xffff) & ui_Temp;
- break;
- case 8:
- data[0] = ~data[0] & 0xff;
- ui_Temp1 = 255;
- ui_Temp1 =
- ui_Temp1 << 8 * data[2];
- ui_Temp = ui_Temp | ui_Temp1;
- data[0] =
- ((data[0] << (8 *
- data
- [2])) ^
- 0xffff) & ui_Temp;
- break;
- case 15:
- break;
- default:
- comedi_error(dev,
- " chan spec wrong");
- return -EINVAL; /* "sorry channel spec wrong " */
- } /* switch(ui_NoOfChannels) */
- outw(data[0],
- devpriv->iobase +
- APCI2016_DIGITAL_OP);
- } /* if(data[1]==1) */
- else {
- printk("\nSpecified channel not supported\n");
- } /* else if(data[1]==1) */
- } /* elseif(data[1]==0) */
- } /* if(data[3]==1); */
- else {
- printk("\nSpecified functionality does not exist\n");
- return -EINVAL;
- } /* if else data[3]==1) */
- } /* if else data[3]==0) */
- return insn->n;
-}
-
-/*
-+----------------------------------------------------------------------------+
-| Function Name : int i_APCI2016_BitsDigitalOutput |
-| (struct comedi_device *dev,struct comedi_subdevice *s, |
-| struct comedi_insn *insn,unsigned int *data) |
-+----------------------------------------------------------------------------+
-| Task : Read value of the selected channel or port |
-+----------------------------------------------------------------------------+
-| Input Parameters : struct comedi_device *dev : Driver handle |
-| unsigned int ui_NoOfChannels : No Of Channels To read |
-| unsigned int *data : Data Pointer to read status |
-+----------------------------------------------------------------------------+
-| Output Parameters : -- |
-+----------------------------------------------------------------------------+
-| Return Value : TRUE : No error occur |
-| : FALSE : Error occur. Return the error |
-| |
-+----------------------------------------------------------------------------+
-*/
-int i_APCI2016_BitsDigitalOutput(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data)
-{
- unsigned int ui_Temp;
- unsigned int ui_NoOfChannel;
- ui_NoOfChannel = CR_CHAN(insn->chanspec);
- if (ui_NoOfChannel > 15) {
- comedi_error(dev,
- "Invalid Channel Numbers !!!, Channel Numbers must be between 0 and 15\n");
- return -EINVAL;
- } /* if ((ui_NoOfChannel<0) || (ui_NoOfChannel>15)) */
- if ((data[0] != 0) && (data[0] != 1)) {
- comedi_error(dev,
- "Invalid Data[0] value !!!, Data[0] should be 0 or 1\n");
- return -EINVAL;
- } /* if ((data[0]!=0) && (data[0]!=1)) */
- ui_Temp = data[0];
- *data = inw(devpriv->iobase + APCI2016_DIGITAL_OP_RW);
- if (ui_Temp == 0) {
- *data = (*data >> ui_NoOfChannel) & 0x1;
- } /* if (ui_Temp==0) */
- else {
- if (ui_Temp == 1) {
- switch (ui_NoOfChannel) {
- case 2:
- *data = (*data >> (2 * data[1])) & 3;
- break;
-
- case 4:
- *data = (*data >> (4 * data[1])) & 15;
- break;
-
- case 8:
- *data = (*data >> (8 * data[1])) & 255;
- break;
-
- case 15:
- break;
-
- default:
- comedi_error(dev, " chan spec wrong");
- return -EINVAL; /* "sorry channel spec wrong " */
- } /* switch(ui_NoOfChannel) */
- } /* if (ui_Temp==1) */
- else {
- printk("\nSpecified channel not supported \n");
- } /* else if (ui_Temp==1) */
- } /* if (ui_Temp==0) */
- return insn->n;
-}
-
-/*
-+----------------------------------------------------------------------------+
-| Function Name : int i_APCI2016_ConfigWatchdog |
-| (struct comedi_device *dev,struct comedi_subdevice *s, |
-| struct comedi_insn *insn,unsigned int *data) |
-+----------------------------------------------------------------------------+
-| Task : Configures The Watchdog |
-+----------------------------------------------------------------------------+
-| Input Parameters : struct comedi_device *dev : Driver handle |
-| struct comedi_subdevice *s, :pointer to subdevice structure |
-| struct comedi_insn *insn :pointer to insn structure |
-| unsigned int *data : Data Pointer to read status |
-+----------------------------------------------------------------------------+
-| Output Parameters : -- |
-+----------------------------------------------------------------------------+
-| Return Value : TRUE : No error occur |
-| : FALSE : Error occur. Return the error |
-| |
-+----------------------------------------------------------------------------+
-*/
-int i_APCI2016_ConfigWatchdog(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data)
-{
-
- if (data[0] == 0) {
- /* Disable the watchdog */
- outw(0x0,
- devpriv->i_IobaseAddon +
- APCI2016_WATCHDOG_ENABLEDISABLE);
- /* Loading the Reload value */
- outw(data[1],
- devpriv->i_IobaseAddon +
- APCI2016_WATCHDOG_RELOAD_VALUE);
- data[1] = data[1] >> 16;
- outw(data[1],
- devpriv->i_IobaseAddon +
- APCI2016_WATCHDOG_RELOAD_VALUE + 2);
- } else {
- printk("\nThe input parameters are wrong\n");
- }
- return insn->n;
-}
-
-/*
-+----------------------------------------------------------------------------+
-| Function Name : int i_APCI2016_StartStopWriteWatchdog |
-| (struct comedi_device *dev,struct comedi_subdevice *s, |
-| struct comedi_insn *insn,unsigned int *data) |
-+----------------------------------------------------------------------------+
-| Task : Start / Stop The Watchdog |
-+----------------------------------------------------------------------------+
-| Input Parameters : struct comedi_device *dev : Driver handle |
-| struct comedi_subdevice *s, :pointer to subdevice structure |
-| struct comedi_insn *insn :pointer to insn structure |
-| unsigned int *data : Data Pointer to read status |
-+----------------------------------------------------------------------------+
-| Output Parameters : -- |
-+----------------------------------------------------------------------------+
-| Return Value : TRUE : No error occur |
-| : FALSE : Error occur. Return the error |
-| |
-+----------------------------------------------------------------------------+
-*/
-int i_APCI2016_StartStopWriteWatchdog(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data)
-{
-
- switch (data[0]) {
- case 0: /* stop the watchdog */
- outw(0x0, devpriv->i_IobaseAddon + APCI2016_WATCHDOG_ENABLEDISABLE); /* disable the watchdog */
- break;
- case 1: /* start the watchdog */
- outw(0x0001,
- devpriv->i_IobaseAddon +
- APCI2016_WATCHDOG_ENABLEDISABLE);
- break;
- case 2: /* Software trigger */
- outw(0x0201,
- devpriv->i_IobaseAddon +
- APCI2016_WATCHDOG_ENABLEDISABLE);
- break;
- default:
- printk("\nSpecified functionality does not exist\n");
- return -EINVAL;
- } /* switch(data[0]) */
-
- return insn->n;
-}
-
-/*
-+----------------------------------------------------------------------------+
-| Function Name : int i_APCI2016_ReadWatchdog |
-| (struct comedi_device *dev,struct comedi_subdevice *s, |
-| struct comedi_insn *insn,unsigned int *data) |
-+----------------------------------------------------------------------------+
-| Task : Read The Watchdog |
-+----------------------------------------------------------------------------+
-| Input Parameters : struct comedi_device *dev : Driver handle |
-| struct comedi_subdevice *s, :pointer to subdevice structure |
-| struct comedi_insn *insn :pointer to insn structure |
-| unsigned int *data : Data Pointer to read status |
-+----------------------------------------------------------------------------+
-| Output Parameters : -- |
-+----------------------------------------------------------------------------+
-| Return Value : TRUE : No error occur |
-| : FALSE : Error occur. Return the error |
-| |
-+----------------------------------------------------------------------------+
-*/
-
-int i_APCI2016_ReadWatchdog(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data)
-{
- udelay(5);
- data[0] = inw(devpriv->i_IobaseAddon + APCI2016_WATCHDOG_STATUS) & 0x1;
- return insn->n;
-}
-
-/*
-+----------------------------------------------------------------------------+
-| Function Name : int i_APCI2016_Reset(struct comedi_device *dev) | |
-+----------------------------------------------------------------------------+
-| Task :resets all the registers |
-+----------------------------------------------------------------------------+
-| Input Parameters : struct comedi_device *dev
-+----------------------------------------------------------------------------+
-| Output Parameters : -- |
-+----------------------------------------------------------------------------+
-| Return Value : |
-| |
-+----------------------------------------------------------------------------+
-*/
-
-int i_APCI2016_Reset(struct comedi_device *dev)
-{
- outw(0x0, devpriv->iobase + APCI2016_DIGITAL_OP); /* Resets the digital output channels */
- outw(0x0, devpriv->i_IobaseAddon + APCI2016_WATCHDOG_ENABLEDISABLE);
- outw(0x0, devpriv->i_IobaseAddon + APCI2016_WATCHDOG_RELOAD_VALUE);
- outw(0x0, devpriv->i_IobaseAddon + APCI2016_WATCHDOG_RELOAD_VALUE + 2);
- return 0;
-}
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2016.h b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2016.h
deleted file mode 100644
index c42612a..0000000
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2016.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module.
- *
- * ADDI-DATA GmbH
- * Dieselstrasse 3
- * D-77833 Ottersweier
- * Tel: +19(0)7223/9493-0
- * Fax: +49(0)7223/9493-92
- * http://www.addi-data.com
- * info@addi-data.com
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 of the License, or (at your option)
- * any later version.
- */
-/********* Definitions for APCI-2016 card *****/
-
-#define APCI2016_BOARD_VENDOR_ID 0x15B8
-#define APCI2016_ADDRESS_RANGE 8
-
-/* DIGITAL INPUT-OUTPUT DEFINE */
-
-#define APCI2016_DIGITAL_OP 0x04
-#define APCI2016_DIGITAL_OP_RW 4
-
-/* ADDIDATA Enable Disable */
-
-#define ADDIDATA_ENABLE 1
-#define ADDIDATA_DISABLE 0
-
-/* TIMER COUNTER WATCHDOG DEFINES */
-
-#define ADDIDATA_WATCHDOG 2
-#define APCI2016_DIGITAL_OP_WATCHDOG 0
-#define APCI2016_WATCHDOG_ENABLEDISABLE 12
-#define APCI2016_WATCHDOG_RELOAD_VALUE 4
-#define APCI2016_WATCHDOG_STATUS 16
-
-/* Hardware Layer functions for Apci2016 */
-
-/* DO */
-int i_APCI2016_ConfigDigitalOutput(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-
-int i_APCI2016_WriteDigitalOutput(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-
-int i_APCI2016_BitsDigitalOutput(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-
-/*
-* TIMER
-* timer value is passed as u seconds
-*/
-
-int i_APCI2016_ConfigWatchdog(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-
-int i_APCI2016_StartStopWriteWatchdog(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-
-int i_APCI2016_ReadWatchdog(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-
-/* Interrupt functions..... */
-
-/* void v_APCI2016_Interrupt(int irq, void *d); */
-
-/* void v_APCI2016_Interrupt(int irq, void *d); */
-/* RESET */
-int i_APCI2016_Reset(struct comedi_device *dev);
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2032.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2032.c
deleted file mode 100644
index 002297d..0000000
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2032.c
+++ /dev/null
@@ -1,579 +0,0 @@
-/**
-@verbatim
-
-Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module.
-
- ADDI-DATA GmbH
- Dieselstrasse 3
- D-77833 Ottersweier
- Tel: +19(0)7223/9493-0
- Fax: +49(0)7223/9493-92
- http://www.addi-data.com
- info@addi-data.com
-
-This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
-
-This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-
-You should also find the complete GPL in the COPYING file accompanying this source code.
-
-@endverbatim
-*/
-/*
-
- +-----------------------------------------------------------------------+
- | (C) ADDI-DATA GmbH Dieselstraße 3 D-77833 Ottersweier |
- +-----------------------------------------------------------------------+
- | Tel : +49 (0) 7223/9493-0 | email : info@addi-data.com |
- | Fax : +49 (0) 7223/9493-92 | Internet : http://www.addi-data.com |
- +-------------------------------+---------------------------------------+
- | Project : APCI-2032 | Compiler : GCC |
- | Module name : hwdrv_apci2032.c| Version : 2.96 |
- +-------------------------------+---------------------------------------+
- | Project manager: Eric Stolz | Date : 02/12/2002 |
- +-------------------------------+---------------------------------------+
- | Description : Hardware Layer Access For APCI-2032 |
- +-----------------------------------------------------------------------+
- | UPDATES |
- +----------+-----------+------------------------------------------------+
- | Date | Author | Description of updates |
- +----------+-----------+------------------------------------------------+
- | | | |
- | | | |
- | | | |
- +----------+-----------+------------------------------------------------+
-*/
-
-/*
-+----------------------------------------------------------------------------+
-| Included files |
-+----------------------------------------------------------------------------+
-*/
-
-#include "hwdrv_apci2032.h"
-static unsigned int ui_InterruptData, ui_Type;
-/*
-+----------------------------------------------------------------------------+
-| Function Name : int i_APCI2032_ConfigDigitalOutput |
-| (struct comedi_device *dev,struct comedi_subdevice *s, |
-| struct comedi_insn *insn,unsigned int *data) |
-+----------------------------------------------------------------------------+
-| Task : Configures The Digital Output Subdevice. |
-+----------------------------------------------------------------------------+
-| Input Parameters : struct comedi_device *dev : Driver handle |
-| unsigned int *data : Data Pointer contains |
-| configuration parameters as below |
-| |
-| data[1] : 1 Enable VCC Interrupt |
-| 0 Disable VCC Interrupt |
-| data[2] : 1 Enable CC Interrupt |
-| 0 Disable CC Interrupt |
-| |
-+----------------------------------------------------------------------------+
-| Output Parameters : -- |
-+----------------------------------------------------------------------------+
-| Return Value : TRUE : No error occur |
-| : FALSE : Error occur. Return the error |
-| |
-+----------------------------------------------------------------------------+
-*/
-int i_APCI2032_ConfigDigitalOutput(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data)
-{
- unsigned int ul_Command = 0;
- devpriv->tsk_Current = current;
-
- if ((data[0] != 0) && (data[0] != 1)) {
- comedi_error(dev,
- "Not a valid Data !!! ,Data should be 1 or 0\n");
- return -EINVAL;
- } /* if ( (data[0]!=0) && (data[0]!=1) ) */
- if (data[0]) {
- devpriv->b_OutputMemoryStatus = ADDIDATA_ENABLE;
- } /* if (data[0]) */
- else {
- devpriv->b_OutputMemoryStatus = ADDIDATA_DISABLE;
- } /* else if (data[0]) */
-
- if (data[1] == ADDIDATA_ENABLE) {
- ul_Command = ul_Command | 0x1;
- } /* if (data[1] == ADDIDATA_ENABLE) */
- else {
- ul_Command = ul_Command & 0xFFFFFFFE;
- } /* elseif (data[1] == ADDIDATA_ENABLE) */
- if (data[2] == ADDIDATA_ENABLE) {
- ul_Command = ul_Command | 0x2;
- } /* if (data[2] == ADDIDATA_ENABLE) */
- else {
- ul_Command = ul_Command & 0xFFFFFFFD;
- } /* elseif (data[2] == ADDIDATA_ENABLE) */
- outl(ul_Command, devpriv->iobase + APCI2032_DIGITAL_OP_INTERRUPT);
- ui_InterruptData = inl(devpriv->iobase + APCI2032_DIGITAL_OP_INTERRUPT);
- return insn->n;
-}
-
-/*
-+----------------------------------------------------------------------------+
-| Function Name : int i_APCI2032_WriteDigitalOutput |
-| (struct comedi_device *dev,struct comedi_subdevice *s, |
-| struct comedi_insn *insn,unsigned int *data) |
-+----------------------------------------------------------------------------+
-| Task : Writes port value To the selected port |
-+----------------------------------------------------------------------------+
-| Input Parameters : struct comedi_device *dev : Driver handle |
-| unsigned int ui_NoOfChannels : No Of Channels To Write |
-| unsigned int *data : Data Pointer to read status |
-+----------------------------------------------------------------------------+
-| Output Parameters : -- |
-+----------------------------------------------------------------------------+
-| Return Value : TRUE : No error occur |
-| : FALSE : Error occur. Return the error |
-| |
-+----------------------------------------------------------------------------+
-*/
-
-int i_APCI2032_WriteDigitalOutput(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data)
-{
- unsigned int ui_Temp, ui_Temp1;
- unsigned int ui_NoOfChannel = CR_CHAN(insn->chanspec); /* get the channel */
- if (devpriv->b_OutputMemoryStatus) {
- ui_Temp = inl(devpriv->iobase + APCI2032_DIGITAL_OP);
-
- } /* if(devpriv->b_OutputMemoryStatus ) */
- else {
- ui_Temp = 0;
- } /* if(devpriv->b_OutputMemoryStatus ) */
- if (data[3] == 0) {
- if (data[1] == 0) {
- data[0] = (data[0] << ui_NoOfChannel) | ui_Temp;
- outl(data[0], devpriv->iobase + APCI2032_DIGITAL_OP);
- } /* if(data[1]==0) */
- else {
- if (data[1] == 1) {
- switch (ui_NoOfChannel) {
-
- case 2:
- data[0] =
- (data[0] << (2 *
- data[2])) | ui_Temp;
- break;
-
- case 4:
- data[0] =
- (data[0] << (4 *
- data[2])) | ui_Temp;
- break;
-
- case 8:
- data[0] =
- (data[0] << (8 *
- data[2])) | ui_Temp;
- break;
-
- case 16:
- data[0] =
- (data[0] << (16 *
- data[2])) | ui_Temp;
- break;
- case 31:
- data[0] = data[0] | ui_Temp;
- break;
-
- default:
- comedi_error(dev, " chan spec wrong");
- return -EINVAL; /* "sorry channel spec wrong " */
-
- } /* switch(ui_NoOfChannels) */
-
- outl(data[0],
- devpriv->iobase + APCI2032_DIGITAL_OP);
- } /* if(data[1]==1) */
- else {
- printk("\nSpecified channel not supported\n");
- } /* else if(data[1]==1) */
- } /* elseif(data[1]==0) */
- } /* if(data[3]==0) */
- else {
- if (data[3] == 1) {
- if (data[1] == 0) {
- data[0] = ~data[0] & 0x1;
- ui_Temp1 = 1;
- ui_Temp1 = ui_Temp1 << ui_NoOfChannel;
- ui_Temp = ui_Temp | ui_Temp1;
- data[0] =
- (data[0] << ui_NoOfChannel) ^
- 0xffffffff;
- data[0] = data[0] & ui_Temp;
- outl(data[0],
- devpriv->iobase + APCI2032_DIGITAL_OP);
- } /* if(data[1]==0) */
- else {
- if (data[1] == 1) {
- switch (ui_NoOfChannel) {
-
- case 2:
- data[0] = ~data[0] & 0x3;
- ui_Temp1 = 3;
- ui_Temp1 =
- ui_Temp1 << 2 * data[2];
- ui_Temp = ui_Temp | ui_Temp1;
- data[0] =
- ((data[0] << (2 *
- data
- [2])) ^
- 0xffffffff) & ui_Temp;
- break;
-
- case 4:
- data[0] = ~data[0] & 0xf;
- ui_Temp1 = 15;
- ui_Temp1 =
- ui_Temp1 << 4 * data[2];
- ui_Temp = ui_Temp | ui_Temp1;
- data[0] =
- ((data[0] << (4 *
- data
- [2])) ^
- 0xffffffff) & ui_Temp;
- break;
-
- case 8:
- data[0] = ~data[0] & 0xff;
- ui_Temp1 = 255;
- ui_Temp1 =
- ui_Temp1 << 8 * data[2];
- ui_Temp = ui_Temp | ui_Temp1;
- data[0] =
- ((data[0] << (8 *
- data
- [2])) ^
- 0xffffffff) & ui_Temp;
- break;
-
- case 16:
- data[0] = ~data[0] & 0xffff;
- ui_Temp1 = 65535;
- ui_Temp1 =
- ui_Temp1 << 16 *
- data[2];
- ui_Temp = ui_Temp | ui_Temp1;
- data[0] =
- ((data[0] << (16 *
- data
- [2])) ^
- 0xffffffff) & ui_Temp;
- break;
-
- case 31:
- break;
- default:
- comedi_error(dev,
- " chan spec wrong");
- return -EINVAL; /* "sorry channel spec wrong " */
-
- } /* switch(ui_NoOfChannels) */
-
- outl(data[0],
- devpriv->iobase +
- APCI2032_DIGITAL_OP);
- } /* if(data[1]==1) */
- else {
- printk("\nSpecified channel not supported\n");
- } /* else if(data[1]==1) */
- } /* elseif(data[1]==0) */
- } /* if(data[3]==1); */
- else {
- printk("\nSpecified functionality does not exist\n");
- return -EINVAL;
- } /* if else data[3]==1) */
- } /* if else data[3]==0) */
- return insn->n;
-}
-
-/*
-+----------------------------------------------------------------------------+
-| Function Name : int i_APCI2032_ReadDigitalOutput |
-| (struct comedi_device *dev,struct comedi_subdevice *s, |
-| struct comedi_insn *insn,unsigned int *data) |
-+----------------------------------------------------------------------------+
-| Task : Read value of the selected channel or port |
-+----------------------------------------------------------------------------+
-| Input Parameters : struct comedi_device *dev : Driver handle |
-| unsigned int ui_NoOfChannels : No Of Channels To read |
-| unsigned int *data : Data Pointer to read status |
-+----------------------------------------------------------------------------+
-| Output Parameters : -- |
-+----------------------------------------------------------------------------+
-| Return Value : TRUE : No error occur |
-| : FALSE : Error occur. Return the error |
-| |
-+----------------------------------------------------------------------------+
-*/
-
-int i_APCI2032_ReadDigitalOutput(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data)
-{
- unsigned int ui_Temp;
- unsigned int ui_NoOfChannel;
- ui_NoOfChannel = CR_CHAN(insn->chanspec);
- ui_Temp = data[0];
- *data = inl(devpriv->iobase + APCI2032_DIGITAL_OP_RW);
- if (ui_Temp == 0) {
- *data = (*data >> ui_NoOfChannel) & 0x1;
- } /* if (ui_Temp==0) */
- else {
- if (ui_Temp == 1) {
- switch (ui_NoOfChannel) {
-
- case 2:
- *data = (*data >> (2 * data[1])) & 3;
- break;
-
- case 4:
- *data = (*data >> (4 * data[1])) & 15;
- break;
-
- case 8:
- *data = (*data >> (8 * data[1])) & 255;
- break;
-
- case 16:
- *data = (*data >> (16 * data[1])) & 65535;
- break;
-
- case 31:
- break;
-
- default:
- comedi_error(dev, " chan spec wrong");
- return -EINVAL; /* "sorry channel spec wrong " */
-
- } /* switch(ui_NoOfChannels) */
- } /* if (ui_Temp==1) */
- else {
- printk("\nSpecified channel not supported \n");
- } /* elseif (ui_Temp==1) */
- }
- return insn->n;
-}
-
-/*
-+----------------------------------------------------------------------------+
-| Function Name : int i_APCI2032_ConfigWatchdog(comedi_device
-| *dev,struct comedi_subdevice *s,struct comedi_insn *insn,unsigned int *data)|
-| |
-+----------------------------------------------------------------------------+
-| Task : Configures The Watchdog |
-+----------------------------------------------------------------------------+
-| Input Parameters : struct comedi_device *dev : Driver handle |
-| struct comedi_subdevice *s, :pointer to subdevice structure
-| struct comedi_insn *insn :pointer to insn structure |
-| unsigned int *data : Data Pointer to read status |
-+----------------------------------------------------------------------------+
-| Output Parameters : -- |
-+----------------------------------------------------------------------------+
-| Return Value : TRUE : No error occur |
-| : FALSE : Error occur. Return the error |
-| |
-+----------------------------------------------------------------------------+
-*/
-int i_APCI2032_ConfigWatchdog(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data)
-{
- if (data[0] == 0) {
- /* Disable the watchdog */
- outl(0x0,
- devpriv->iobase + APCI2032_DIGITAL_OP_WATCHDOG +
- APCI2032_TCW_PROG);
- /* Loading the Reload value */
- outl(data[1],
- devpriv->iobase + APCI2032_DIGITAL_OP_WATCHDOG +
- APCI2032_TCW_RELOAD_VALUE);
- } else {
- printk("\nThe input parameters are wrong\n");
- return -EINVAL;
- }
-
- return insn->n;
-}
-
- /*
- +----------------------------------------------------------------------------+
- | Function Name : int i_APCI2032_StartStopWriteWatchdog |
- | (struct comedi_device *dev,struct comedi_subdevice *s,
- struct comedi_insn *insn,unsigned int *data); |
- +----------------------------------------------------------------------------+
- | Task : Start / Stop The Watchdog |
- +----------------------------------------------------------------------------+
- | Input Parameters : struct comedi_device *dev : Driver handle |
- | struct comedi_subdevice *s, :pointer to subdevice structure
- struct comedi_insn *insn :pointer to insn structure |
- | unsigned int *data : Data Pointer to read status |
- +----------------------------------------------------------------------------+
- | Output Parameters : -- |
- +----------------------------------------------------------------------------+
- | Return Value : TRUE : No error occur |
- | : FALSE : Error occur. Return the error |
- | |
- +----------------------------------------------------------------------------+
- */
-
-int i_APCI2032_StartStopWriteWatchdog(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data)
-{
- switch (data[0]) {
- case 0: /* stop the watchdog */
- outl(0x0, devpriv->iobase + APCI2032_DIGITAL_OP_WATCHDOG + APCI2032_TCW_PROG); /* disable the watchdog */
- break;
- case 1: /* start the watchdog */
- outl(0x0001,
- devpriv->iobase + APCI2032_DIGITAL_OP_WATCHDOG +
- APCI2032_TCW_PROG);
- break;
- case 2: /* Software trigger */
- outl(0x0201,
- devpriv->iobase + APCI2032_DIGITAL_OP_WATCHDOG +
- APCI2032_TCW_PROG);
- break;
- default:
- printk("\nSpecified functionality does not exist\n");
- return -EINVAL;
- }
- return insn->n;
-}
-
-/*
-+----------------------------------------------------------------------------+
-| Function Name : int i_APCI2032_ReadWatchdog |
-| (struct comedi_device *dev,struct comedi_subdevice *s,struct comedi_insn *insn,
-| unsigned int *data); |
-+----------------------------------------------------------------------------+
-| Task : Read The Watchdog |
-+----------------------------------------------------------------------------+
-| Input Parameters : struct comedi_device *dev : Driver handle |
-| struct comedi_subdevice *s, :pointer to subdevice structure
-| struct comedi_insn *insn :pointer to insn structure |
-| unsigned int *data : Data Pointer to read status |
-+----------------------------------------------------------------------------+
-| Output Parameters : -- |
-+----------------------------------------------------------------------------+
-| Return Value : TRUE : No error occur |
-| : FALSE : Error occur. Return the error |
-| |
-+----------------------------------------------------------------------------+
-*/
-
-int i_APCI2032_ReadWatchdog(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data)
-{
-
- data[0] =
- inl(devpriv->iobase + APCI2032_DIGITAL_OP_WATCHDOG +
- APCI2032_TCW_TRIG_STATUS) & 0x1;
- return insn->n;
-}
-
-/*
-+----------------------------------------------------------------------------+
-| Function Name : void v_APCI2032_Interrupt |
-| (int irq , void *d) |
-+----------------------------------------------------------------------------+
-| Task : Writes port value To the selected port |
-+----------------------------------------------------------------------------+
-| Input Parameters : int irq : irq number |
-| void *d : void pointer |
-+----------------------------------------------------------------------------+
-| Output Parameters : -- |
-+----------------------------------------------------------------------------+
-| Return Value : TRUE : No error occur |
-| : FALSE : Error occur. Return the error |
-| |
-+----------------------------------------------------------------------------+
-*/
-void v_APCI2032_Interrupt(int irq, void *d)
-{
- struct comedi_device *dev = d;
- unsigned int ui_DO;
-
- ui_DO = inl(devpriv->iobase + APCI2032_DIGITAL_OP_IRQ) & 0x1; /* Check if VCC OR CC interrupt has occurred. */
-
- if (ui_DO == 0) {
- printk("\nInterrupt from unKnown source\n");
- } /* if(ui_DO==0) */
- if (ui_DO) {
- /* Check for Digital Output interrupt Type - 1: Vcc interrupt 2: CC interrupt. */
- ui_Type =
- inl(devpriv->iobase +
- APCI2032_DIGITAL_OP_INTERRUPT_STATUS) & 0x3;
- outl(0x0,
- devpriv->iobase + APCI2032_DIGITAL_OP +
- APCI2032_DIGITAL_OP_INTERRUPT);
- if (ui_Type == 1) {
- /* Sends signal to user space */
- send_sig(SIGIO, devpriv->tsk_Current, 0);
- } /* if (ui_Type==1) */
- else {
- if (ui_Type == 2) {
- /* Sends signal to user space */
- send_sig(SIGIO, devpriv->tsk_Current, 0);
- } /* if (ui_Type==2) */
- } /* else if (ui_Type==1) */
- } /* if(ui_DO) */
-
- return;
-
-}
-
-/*
-+----------------------------------------------------------------------------+
-| Function Name : int i_APCI2032_ReadInterruptStatus |
-| (struct comedi_device *dev,struct comedi_subdevice *s, |
-| struct comedi_insn *insn,unsigned int *data) |
-+----------------------------------------------------------------------------+
-| Task :Reads the interrupt status register |
-+----------------------------------------------------------------------------+
-| Input Parameters : |
-+----------------------------------------------------------------------------+
-| Output Parameters : -- |
-+----------------------------------------------------------------------------+
-| Return Value : |
-| |
-+----------------------------------------------------------------------------+
-*/
-
-int i_APCI2032_ReadInterruptStatus(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data)
-{
- *data = ui_Type;
- return insn->n;
-}
-
-/*
-+----------------------------------------------------------------------------+
-| Function Name : int i_APCI2032_Reset(struct comedi_device *dev) |
-| |
-+----------------------------------------------------------------------------+
-| Task :Resets the registers of the card |
-+----------------------------------------------------------------------------+
-| Input Parameters : |
-+----------------------------------------------------------------------------+
-| Output Parameters : -- |
-+----------------------------------------------------------------------------+
-| Return Value : |
-| |
-+----------------------------------------------------------------------------+
-*/
-
-int i_APCI2032_Reset(struct comedi_device *dev)
-{
- devpriv->b_DigitalOutputRegister = 0;
- ui_Type = 0;
- outl(0x0, devpriv->iobase + APCI2032_DIGITAL_OP); /* Resets the output channels */
- outl(0x0, devpriv->iobase + APCI2032_DIGITAL_OP_INTERRUPT); /* Disables the interrupt. */
- outl(0x0, devpriv->iobase + APCI2032_DIGITAL_OP_WATCHDOG + APCI2032_TCW_PROG); /* disable the watchdog */
- outl(0x0, devpriv->iobase + APCI2032_DIGITAL_OP_WATCHDOG + APCI2032_TCW_RELOAD_VALUE); /* reload=0 */
- return 0;
-}
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2032.h b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2032.h
deleted file mode 100644
index ab145e7..0000000
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2032.h
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- * Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module.
- *
- * ADDI-DATA GmbH
- * Dieselstrasse 3
- * D-77833 Ottersweier
- * Tel: +19(0)7223/9493-0
- * Fax: +49(0)7223/9493-92
- * http://www.addi-data.com
- * info@addi-data.com
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 of the License, or (at your option)
- * any later version.
- */
-
-/********* Definitions for APCI-2032 card *****/
-
-/* Card Specific information */
-#define APCI2032_BOARD_VENDOR_ID 0x15B8
-#define APCI2032_ADDRESS_RANGE 63
-
-/* DIGITAL INPUT-OUTPUT DEFINE */
-
-#define APCI2032_DIGITAL_OP 0
-#define APCI2032_DIGITAL_OP_RW 0
-#define APCI2032_DIGITAL_OP_INTERRUPT 4
-#define APCI2032_DIGITAL_OP_IRQ 12
-
-/* Digital Output Interrupt Status */
-#define APCI2032_DIGITAL_OP_INTERRUPT_STATUS 8
-
-/* Digital Output Interrupt Enable Disable. */
-#define APCI2032_DIGITAL_OP_VCC_INTERRUPT_ENABLE 0x1
-#define APCI2032_DIGITAL_OP_VCC_INTERRUPT_DISABLE 0xFFFFFFFE
-#define APCI2032_DIGITAL_OP_CC_INTERRUPT_ENABLE 0x2
-#define APCI2032_DIGITAL_OP_CC_INTERRUPT_DISABLE 0xFFFFFFFD
-
-/* ADDIDATA Enable Disable */
-
-#define ADDIDATA_ENABLE 1
-#define ADDIDATA_DISABLE 0
-
-/* TIMER COUNTER WATCHDOG DEFINES */
-
-#define ADDIDATA_WATCHDOG 2
-#define APCI2032_DIGITAL_OP_WATCHDOG 16
-#define APCI2032_TCW_RELOAD_VALUE 4
-#define APCI2032_TCW_TIMEBASE 8
-#define APCI2032_TCW_PROG 12
-#define APCI2032_TCW_TRIG_STATUS 16
-#define APCI2032_TCW_IRQ 20
-
-/* Hardware Layer functions for Apci2032 */
-
-/* DO */
-int i_APCI2032_ConfigDigitalOutput(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-int i_APCI2032_WriteDigitalOutput(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-int i_APCI2032_ReadDigitalOutput(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-int i_APCI2032_ReadInterruptStatus(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-
-/* TIMER
- * timer value is passed as u seconds
-*/
-
-int i_APCI2032_ConfigWatchdog(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-int i_APCI2032_StartStopWriteWatchdog(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-int i_APCI2032_ReadWatchdog(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-
-/* Interrupt functions..... */
-
-void v_APCI2032_Interrupt(int irq, void *d);
-
-/* Reset functions */
-int i_APCI2032_Reset(struct comedi_device *dev);
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2200.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2200.c
index 3d378b5..9d4a117 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2200.c
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2200.c
@@ -46,354 +46,54 @@
+----------+-----------+------------------------------------------------+
*/
-/*
-+----------------------------------------------------------------------------+
-| Included files |
-+----------------------------------------------------------------------------+
-*/
-#include "hwdrv_apci2200.h"
+/********* Definitions for APCI-2200 card *****/
-/*
-+----------------------------------------------------------------------------+
-| Function Name : int i_APCI2200_Read1DigitalInput |
-| (struct comedi_device *dev,struct comedi_subdevice *s, |
-| struct comedi_insn *insn,unsigned int *data) |
-+----------------------------------------------------------------------------+
-| Task : Return the status of the digital input |
-+----------------------------------------------------------------------------+
-| Input Parameters : struct comedi_device *dev : Driver handle |
-| struct comedi_subdevice *s, :pointer to subdevice structure
-| struct comedi_insn *insn :pointer to insn structure |
-| unsigned int *data : Data Pointer to read status |
-+----------------------------------------------------------------------------+
-| Output Parameters : -- |
-+----------------------------------------------------------------------------+
-| Return Value : TRUE : No error occur |
-| : FALSE : Error occur. Return the error |
-| |
-+----------------------------------------------------------------------------+
-*/
-int i_APCI2200_Read1DigitalInput(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data)
+/* Card Specific information */
+#define APCI2200_ADDRESS_RANGE 64
+
+/* DIGITAL INPUT-OUTPUT DEFINE */
+
+#define APCI2200_DIGITAL_OP 4
+#define APCI2200_DIGITAL_IP 0
+
+/* TIMER COUNTER WATCHDOG DEFINES */
+
+#define APCI2200_WATCHDOG 0x08
+#define APCI2200_WATCHDOG_ENABLEDISABLE 12
+#define APCI2200_WATCHDOG_RELOAD_VALUE 4
+#define APCI2200_WATCHDOG_STATUS 16
+
+static int apci2200_di_insn_bits(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
{
- unsigned int ui_TmpValue = 0;
- unsigned int ui_Channel;
- ui_Channel = CR_CHAN(insn->chanspec);
- if (ui_Channel <= 7) {
- ui_TmpValue = (unsigned int) inw(devpriv->iobase + APCI2200_DIGITAL_IP);
- *data = (ui_TmpValue >> ui_Channel) & 0x1;
- } /* if(ui_Channel >= 0 && ui_Channel <=7) */
- else {
- printk("\nThe specified channel does not exist\n");
- return -EINVAL; /* "sorry channel spec wrong " */
- } /* else if(ui_Channel >= 0 && ui_Channel <=7) */
+ struct addi_private *devpriv = dev->private;
+
+ data[1] = inw(devpriv->iobase + APCI2200_DIGITAL_IP);
return insn->n;
}
-/*
-+----------------------------------------------------------------------------+
-| Function Name : int i_APCI2200_ReadMoreDigitalInput |
-| (struct comedi_device *dev,struct comedi_subdevice *s, |
-| struct comedi_insn *insn,unsigned int *data) |
-+----------------------------------------------------------------------------+
-| Task : Return the status of the Requested digital inputs |
-+----------------------------------------------------------------------------+
-| Input Parameters : struct comedi_device *dev : Driver handle |
-| struct comedi_subdevice *s, :pointer to subdevice structure
-| struct comedi_insn *insn :pointer to insn structure |
-| unsigned int *data : Data Pointer to read status |
-+----------------------------------------------------------------------------+
-| Output Parameters : -- |
-+----------------------------------------------------------------------------+
-| Return Value : TRUE : No error occur |
-| : FALSE : Error occur. Return the error |
-| |
-+----------------------------------------------------------------------------+
-*/
-
-int i_APCI2200_ReadMoreDigitalInput(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data)
+static int apci2200_do_insn_bits(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
{
+ struct addi_private *devpriv = dev->private;
+ unsigned int mask = data[0];
+ unsigned int bits = data[1];
- unsigned int ui_PortValue = data[0];
- unsigned int ui_Mask = 0;
- unsigned int ui_NoOfChannels;
+ s->state = inw(devpriv->iobase + APCI2200_DIGITAL_OP);
+ if (mask) {
+ s->state &= ~mask;
+ s->state |= (bits & mask);
- ui_NoOfChannels = CR_CHAN(insn->chanspec);
+ outw(s->state, devpriv->iobase + APCI2200_DIGITAL_OP);
+ }
- *data = (unsigned int) inw(devpriv->iobase + APCI2200_DIGITAL_IP);
- switch (ui_NoOfChannels) {
- case 2:
- ui_Mask = 3;
- *data = (*data >> (2 * ui_PortValue)) & ui_Mask;
- break;
- case 4:
- ui_Mask = 15;
- *data = (*data >> (4 * ui_PortValue)) & ui_Mask;
- break;
- case 7:
- break;
+ data[1] = s->state;
- default:
- printk("\nWrong parameters\n");
- return -EINVAL; /* "sorry channel spec wrong " */
- break;
- } /* switch(ui_NoOfChannels) */
-
- return insn->n;
-}
-
-/*
-+----------------------------------------------------------------------------+
-| Function Name : int i_APCI2200_ConfigDigitalOutput (struct comedi_device *dev,
-| struct comedi_subdevice *s struct comedi_insn *insn,unsigned int *data) |
-| |
-+----------------------------------------------------------------------------+
-| Task : Configures The Digital Output Subdevice. |
-+----------------------------------------------------------------------------+
-| Input Parameters : struct comedi_device *dev : Driver handle |
-| unsigned int *data : Data Pointer contains |
-| configuration parameters as below |
-| struct comedi_subdevice *s, :pointer to subdevice structure
-| struct comedi_insn *insn :pointer to insn structure |
-| data[0] :1:Memory on |
-| 0:Memory off |
-| |
-| |
-+----------------------------------------------------------------------------+
-| Output Parameters : -- |
-+----------------------------------------------------------------------------+
-| Return Value : TRUE : No error occur |
-| : FALSE : Error occur. Return the error |
-| |
-+----------------------------------------------------------------------------+
-*/
-int i_APCI2200_ConfigDigitalOutput(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data)
-{
- devpriv->b_OutputMemoryStatus = data[0];
- return insn->n;
-}
-
-/*
-+----------------------------------------------------------------------------+
-| Function Name : int i_APCI2200_WriteDigitalOutput |
-| (struct comedi_device *dev,struct comedi_subdevice *s,struct comedi_insn *insn,
-| unsigned int *data) |
-+----------------------------------------------------------------------------+
-| Task : Writes port value To the selected port |
-+----------------------------------------------------------------------------+
-| Input Parameters : struct comedi_device *dev : Driver handle |
-| struct comedi_subdevice *s, :pointer to subdevice structure
-| struct comedi_insn *insn :pointer to insn structure |
-| unsigned int *data : Data Pointer to read status |
-+----------------------------------------------------------------------------+
-| Output Parameters : -- |
-+----------------------------------------------------------------------------+
-| Return Value : TRUE : No error occur |
-| : FALSE : Error occur. Return the error |
-| |
-+----------------------------------------------------------------------------+
-*/
-
-int i_APCI2200_WriteDigitalOutput(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data)
-{
- unsigned int ui_Temp, ui_Temp1;
- unsigned int ui_NoOfChannel = CR_CHAN(insn->chanspec); /* get the channel */
- if (devpriv->b_OutputMemoryStatus) {
- ui_Temp = inw(devpriv->iobase + APCI2200_DIGITAL_OP);
-
- } /* if(devpriv->b_OutputMemoryStatus ) */
- else {
- ui_Temp = 0;
- } /* if(devpriv->b_OutputMemoryStatus ) */
- if (data[3] == 0) {
- if (data[1] == 0) {
- data[0] = (data[0] << ui_NoOfChannel) | ui_Temp;
- outw(data[0], devpriv->iobase + APCI2200_DIGITAL_OP);
- } /* if(data[1]==0) */
- else {
- if (data[1] == 1) {
- switch (ui_NoOfChannel) {
-
- case 2:
- data[0] =
- (data[0] << (2 *
- data[2])) | ui_Temp;
- break;
-
- case 4:
- data[0] =
- (data[0] << (4 *
- data[2])) | ui_Temp;
- break;
-
- case 8:
- data[0] =
- (data[0] << (8 *
- data[2])) | ui_Temp;
- break;
- case 15:
- data[0] = data[0] | ui_Temp;
- break;
- default:
- comedi_error(dev, " chan spec wrong");
- return -EINVAL; /* "sorry channel spec wrong " */
-
- } /* switch(ui_NoOfChannels) */
-
- outw(data[0],
- devpriv->iobase + APCI2200_DIGITAL_OP);
- } /* if(data[1]==1) */
- else {
- printk("\nSpecified channel not supported\n");
- } /* else if(data[1]==1) */
- } /* elseif(data[1]==0) */
- } /* if(data[3]==0) */
- else {
- if (data[3] == 1) {
- if (data[1] == 0) {
- data[0] = ~data[0] & 0x1;
- ui_Temp1 = 1;
- ui_Temp1 = ui_Temp1 << ui_NoOfChannel;
- ui_Temp = ui_Temp | ui_Temp1;
- data[0] = (data[0] << ui_NoOfChannel) ^ 0xffff;
- data[0] = data[0] & ui_Temp;
- outw(data[0],
- devpriv->iobase + APCI2200_DIGITAL_OP);
- } /* if(data[1]==0) */
- else {
- if (data[1] == 1) {
- switch (ui_NoOfChannel) {
-
- case 2:
- data[0] = ~data[0] & 0x3;
- ui_Temp1 = 3;
- ui_Temp1 =
- ui_Temp1 << 2 * data[2];
- ui_Temp = ui_Temp | ui_Temp1;
- data[0] =
- ((data[0] << (2 *
- data
- [2])) ^
- 0xffff) & ui_Temp;
- break;
-
- case 4:
- data[0] = ~data[0] & 0xf;
- ui_Temp1 = 15;
- ui_Temp1 =
- ui_Temp1 << 4 * data[2];
- ui_Temp = ui_Temp | ui_Temp1;
- data[0] =
- ((data[0] << (4 *
- data
- [2])) ^
- 0xffff) & ui_Temp;
- break;
-
- case 8:
- data[0] = ~data[0] & 0xff;
- ui_Temp1 = 255;
- ui_Temp1 =
- ui_Temp1 << 8 * data[2];
- ui_Temp = ui_Temp | ui_Temp1;
- data[0] =
- ((data[0] << (8 *
- data
- [2])) ^
- 0xffff) & ui_Temp;
- break;
- case 15:
- break;
-
- default:
- comedi_error(dev,
- " chan spec wrong");
- return -EINVAL; /* "sorry channel spec wrong " */
-
- } /* switch(ui_NoOfChannels) */
-
- outw(data[0],
- devpriv->iobase +
- APCI2200_DIGITAL_OP);
- } /* if(data[1]==1) */
- else {
- printk("\nSpecified channel not supported\n");
- } /* else if(data[1]==1) */
- } /* elseif(data[1]==0) */
- } /* if(data[3]==1); */
- else {
- printk("\nSpecified functionality does not exist\n");
- return -EINVAL;
- } /* if else data[3]==1) */
- } /* if else data[3]==0) */
- return insn->n;
-}
-
-/*
-+----------------------------------------------------------------------------+
-| Function Name : int i_APCI2200_ReadDigitalOutput |
-| (struct comedi_device *dev,struct comedi_subdevice *s,struct comedi_insn *insn,
-| unsigned int *data) |
-+----------------------------------------------------------------------------+
-| Task : Read value of the selected channel or port |
-+----------------------------------------------------------------------------+
-| Input Parameters : struct comedi_device *dev : Driver handle |
-| struct comedi_subdevice *s, :pointer to subdevice structure
-| struct comedi_insn *insn :pointer to insn structure |
-| unsigned int *data : Data Pointer to read status |
-+----------------------------------------------------------------------------+
-| Output Parameters : -- |
-+----------------------------------------------------------------------------+
-| Return Value : TRUE : No error occur |
-| : FALSE : Error occur. Return the error |
-| |
-+----------------------------------------------------------------------------+
-*/
-
-int i_APCI2200_ReadDigitalOutput(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data)
-{
-
- unsigned int ui_Temp;
- unsigned int ui_NoOfChannel = CR_CHAN(insn->chanspec); /* get the channel */
- ui_Temp = data[0];
- *data = inw(devpriv->iobase + APCI2200_DIGITAL_OP);
- if (ui_Temp == 0) {
- *data = (*data >> ui_NoOfChannel) & 0x1;
- } /* if(ui_Temp==0) */
- else {
- if (ui_Temp == 1) {
- switch (ui_NoOfChannel) {
-
- case 2:
- *data = (*data >> (2 * data[1])) & 3;
- break;
-
- case 4:
- *data = (*data >> (4 * data[1])) & 15;
- break;
-
- case 8:
- *data = (*data >> (8 * data[1])) & 255;
- break;
-
- case 15:
- break;
-
- default:
- comedi_error(dev, " chan spec wrong");
- return -EINVAL; /* "sorry channel spec wrong " */
-
- } /* switch(ui_NoOfChannels) */
- } /* if(ui_Temp==1) */
- else {
- printk("\nSpecified channel not supported \n");
- } /* elseif(ui_Temp==1) */
- } /* elseif(ui_Temp==0) */
return insn->n;
}
@@ -418,9 +118,13 @@
+----------------------------------------------------------------------------+
*/
-int i_APCI2200_ConfigWatchdog(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data)
+static int i_APCI2200_ConfigWatchdog(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
{
+ struct addi_private *devpriv = dev->private;
+
if (data[0] == 0) {
/* Disable the watchdog */
outw(0x0,
@@ -464,9 +168,13 @@
+----------------------------------------------------------------------------+
*/
-int i_APCI2200_StartStopWriteWatchdog(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data)
+static int i_APCI2200_StartStopWriteWatchdog(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
{
+ struct addi_private *devpriv = dev->private;
+
switch (data[0]) {
case 0: /* stop the watchdog */
outw(0x0, devpriv->iobase + APCI2200_WATCHDOG + APCI2200_WATCHDOG_ENABLEDISABLE); /* disable the watchdog */
@@ -509,9 +217,13 @@
+----------------------------------------------------------------------------+
*/
-int i_APCI2200_ReadWatchdog(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data)
+static int i_APCI2200_ReadWatchdog(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
{
+ struct addi_private *devpriv = dev->private;
+
data[0] =
inw(devpriv->iobase + APCI2200_WATCHDOG +
APCI2200_WATCHDOG_STATUS) & 0x1;
@@ -533,8 +245,10 @@
+----------------------------------------------------------------------------+
*/
-int i_APCI2200_Reset(struct comedi_device *dev)
+static int i_APCI2200_Reset(struct comedi_device *dev)
{
+ struct addi_private *devpriv = dev->private;
+
outw(0x0, devpriv->iobase + APCI2200_DIGITAL_OP); /* RESETS THE DIGITAL OUTPUTS */
outw(0x0,
devpriv->iobase + APCI2200_WATCHDOG +
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2200.h b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2200.h
deleted file mode 100644
index 83f42af..0000000
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2200.h
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
- * Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module.
- *
- * ADDI-DATA GmbH
- * Dieselstrasse 3
- * D-77833 Ottersweier
- * Tel: +19(0)7223/9493-0
- * Fax: +49(0)7223/9493-92
- * http://www.addi-data.com
- * info@addi-data.com
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 of the License, or (at your option)
- * any later version.
- */
-
-/********* Definitions for APCI-2200 card *****/
-
-/* Card Specific information */
-#define APCI2200_BOARD_VENDOR_ID 0x15b8
-#define APCI2200_ADDRESS_RANGE 64
-
-/* DIGITAL INPUT-OUTPUT DEFINE */
-
-#define APCI2200_DIGITAL_OP 4
-#define APCI2200_DIGITAL_IP 0
-
-/* TIMER COUNTER WATCHDOG DEFINES */
-
-#define APCI2200_WATCHDOG 0x08
-#define APCI2200_WATCHDOG_ENABLEDISABLE 12
-#define APCI2200_WATCHDOG_RELOAD_VALUE 4
-#define APCI2200_WATCHDOG_STATUS 16
-
-/* Hardware Layer functions for Apci2200 */
-
-/* Digital Input */
-int i_APCI2200_ReadMoreDigitalInput(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-int i_APCI2200_Read1DigitalInput(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-
-/* Digital Output */
-int i_APCI2200_ConfigDigitalOutput(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-int i_APCI2200_WriteDigitalOutput(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-int i_APCI2200_ReadDigitalOutput(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-
-/* TIMER */
-int i_APCI2200_ConfigWatchdog(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-int i_APCI2200_StartStopWriteWatchdog(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-int i_APCI2200_ReadWatchdog(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-
-/* reset */
-int i_APCI2200_Reset(struct comedi_device *dev);
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c
index f406dfb..74065ba 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c
@@ -44,8 +44,203 @@
+----------+-----------+------------------------------------------------+
*/
-#include "hwdrv_apci3120.h"
-static unsigned int ui_Temp;
+/*
+ * ADDON RELATED ADDITIONS
+ */
+/* Constant */
+#define APCI3120_ENABLE_TRANSFER_ADD_ON_LOW 0x00
+#define APCI3120_ENABLE_TRANSFER_ADD_ON_HIGH 0x1200
+#define APCI3120_A2P_FIFO_MANAGEMENT 0x04000400L
+#define APCI3120_AMWEN_ENABLE 0x02
+#define APCI3120_A2P_FIFO_WRITE_ENABLE 0x01
+#define APCI3120_FIFO_ADVANCE_ON_BYTE_2 0x20000000L
+#define APCI3120_ENABLE_WRITE_TC_INT 0x00004000L
+#define APCI3120_CLEAR_WRITE_TC_INT 0x00040000L
+#define APCI3120_DISABLE_AMWEN_AND_A2P_FIFO_WRITE 0x0
+#define APCI3120_DISABLE_BUS_MASTER_ADD_ON 0x0
+#define APCI3120_DISABLE_BUS_MASTER_PCI 0x0
+
+/* ADD_ON ::: this needed since apci supports 16 bit interface to add on */
+#define APCI3120_ADD_ON_AGCSTS_LOW 0x3C
+#define APCI3120_ADD_ON_AGCSTS_HIGH (APCI3120_ADD_ON_AGCSTS_LOW + 2)
+#define APCI3120_ADD_ON_MWAR_LOW 0x24
+#define APCI3120_ADD_ON_MWAR_HIGH (APCI3120_ADD_ON_MWAR_LOW + 2)
+#define APCI3120_ADD_ON_MWTC_LOW 0x058
+#define APCI3120_ADD_ON_MWTC_HIGH (APCI3120_ADD_ON_MWTC_LOW + 2)
+
+/* AMCC */
+#define APCI3120_AMCC_OP_MCSR 0x3C
+#define APCI3120_AMCC_OP_REG_INTCSR 0x38
+
+/* for transfer count enable bit */
+#define AGCSTS_TC_ENABLE 0x10000000
+
+/* used for test on mixture of BIP/UNI ranges */
+#define APCI3120_BIPOLAR_RANGES 4
+
+#define APCI3120_ADDRESS_RANGE 16
+
+#define APCI3120_DISABLE 0
+#define APCI3120_ENABLE 1
+
+#define APCI3120_START 1
+#define APCI3120_STOP 0
+
+#define APCI3120_EOC_MODE 1
+#define APCI3120_EOS_MODE 2
+#define APCI3120_DMA_MODE 3
+
+/* DIGITAL INPUT-OUTPUT DEFINE */
+
+#define APCI3120_DIGITAL_OUTPUT 0x0d
+#define APCI3120_RD_STATUS 0x02
+#define APCI3120_RD_FIFO 0x00
+
+/* digital output insn_write ON /OFF selection */
+#define APCI3120_SET4DIGITALOUTPUTON 1
+#define APCI3120_SET4DIGITALOUTPUTOFF 0
+
+/* analog output SELECT BIT */
+#define APCI3120_ANALOG_OP_CHANNEL_1 0x0000
+#define APCI3120_ANALOG_OP_CHANNEL_2 0x4000
+#define APCI3120_ANALOG_OP_CHANNEL_3 0x8000
+#define APCI3120_ANALOG_OP_CHANNEL_4 0xc000
+#define APCI3120_ANALOG_OP_CHANNEL_5 0x0000
+#define APCI3120_ANALOG_OP_CHANNEL_6 0x4000
+#define APCI3120_ANALOG_OP_CHANNEL_7 0x8000
+#define APCI3120_ANALOG_OP_CHANNEL_8 0xc000
+
+/* Enable external trigger bit in nWrAddress */
+#define APCI3120_ENABLE_EXT_TRIGGER 0x8000
+
+/* ANALOG OUTPUT AND INPUT DEFINE */
+#define APCI3120_UNIPOLAR 0x80
+#define APCI3120_BIPOLAR 0x00
+#define APCI3120_ANALOG_OUTPUT_1 0x08
+#define APCI3120_ANALOG_OUTPUT_2 0x0a
+#define APCI3120_1_GAIN 0x00
+#define APCI3120_2_GAIN 0x10
+#define APCI3120_5_GAIN 0x20
+#define APCI3120_10_GAIN 0x30
+#define APCI3120_SEQ_RAM_ADDRESS 0x06
+#define APCI3120_RESET_FIFO 0x0c
+#define APCI3120_TIMER_0_MODE_2 0x01
+#define APCI3120_TIMER_0_MODE_4 0x2
+#define APCI3120_SELECT_TIMER_0_WORD 0x00
+#define APCI3120_ENABLE_TIMER0 0x1000
+#define APCI3120_CLEAR_PR 0xf0ff
+#define APCI3120_CLEAR_PA 0xfff0
+#define APCI3120_CLEAR_PA_PR (APCI3120_CLEAR_PR & APCI3120_CLEAR_PA)
+
+/* nWrMode_Select */
+#define APCI3120_ENABLE_SCAN 0x8
+#define APCI3120_DISABLE_SCAN (~APCI3120_ENABLE_SCAN)
+#define APCI3120_ENABLE_EOS_INT 0x2
+
+#define APCI3120_DISABLE_EOS_INT (~APCI3120_ENABLE_EOS_INT)
+#define APCI3120_ENABLE_EOC_INT 0x1
+#define APCI3120_DISABLE_EOC_INT (~APCI3120_ENABLE_EOC_INT)
+#define APCI3120_DISABLE_ALL_INTERRUPT_WITHOUT_TIMER \
+ (APCI3120_DISABLE_EOS_INT & APCI3120_DISABLE_EOC_INT)
+#define APCI3120_DISABLE_ALL_INTERRUPT \
+ (APCI3120_DISABLE_TIMER_INT & APCI3120_DISABLE_EOS_INT & APCI3120_DISABLE_EOC_INT)
+
+/* status register bits */
+#define APCI3120_EOC 0x8000
+#define APCI3120_EOS 0x2000
+
+/* software trigger dummy register */
+#define APCI3120_START_CONVERSION 0x02
+
+/* TIMER DEFINE */
+#define APCI3120_QUARTZ_A 70
+#define APCI3120_QUARTZ_B 50
+#define APCI3120_TIMER 1
+#define APCI3120_WATCHDOG 2
+#define APCI3120_TIMER_DISABLE 0
+#define APCI3120_TIMER_ENABLE 1
+#define APCI3120_ENABLE_TIMER2 0x4000
+#define APCI3120_DISABLE_TIMER2 (~APCI3120_ENABLE_TIMER2)
+#define APCI3120_ENABLE_TIMER_INT 0x04
+#define APCI3120_DISABLE_TIMER_INT (~APCI3120_ENABLE_TIMER_INT)
+#define APCI3120_WRITE_MODE_SELECT 0x0e
+#define APCI3120_SELECT_TIMER_0_WORD 0x00
+#define APCI3120_SELECT_TIMER_1_WORD 0x01
+#define APCI3120_TIMER_1_MODE_2 0x4
+
+/* $$ BIT FOR MODE IN nCsTimerCtr1 */
+#define APCI3120_TIMER_2_MODE_0 0x0
+#define APCI3120_TIMER_2_MODE_2 0x10
+#define APCI3120_TIMER_2_MODE_5 0x30
+
+/* $$ BIT FOR MODE IN nCsTimerCtr0 */
+#define APCI3120_SELECT_TIMER_2_LOW_WORD 0x02
+#define APCI3120_SELECT_TIMER_2_HIGH_WORD 0x03
+
+#define APCI3120_TIMER_CRT0 0x0d
+#define APCI3120_TIMER_CRT1 0x0c
+
+#define APCI3120_TIMER_VALUE 0x04
+#define APCI3120_TIMER_STATUS_REGISTER 0x0d
+#define APCI3120_RD_STATUS 0x02
+#define APCI3120_WR_ADDRESS 0x00
+#define APCI3120_ENABLE_WATCHDOG 0x20
+#define APCI3120_DISABLE_WATCHDOG (~APCI3120_ENABLE_WATCHDOG)
+#define APCI3120_ENABLE_TIMER_COUNTER 0x10
+#define APCI3120_DISABLE_TIMER_COUNTER (~APCI3120_ENABLE_TIMER_COUNTER)
+#define APCI3120_FC_TIMER 0x1000
+#define APCI3120_ENABLE_TIMER0 0x1000
+#define APCI3120_ENABLE_TIMER1 0x2000
+#define APCI3120_ENABLE_TIMER2 0x4000
+#define APCI3120_DISABLE_TIMER0 (~APCI3120_ENABLE_TIMER0)
+#define APCI3120_DISABLE_TIMER1 (~APCI3120_ENABLE_TIMER1)
+#define APCI3120_DISABLE_TIMER2 (~APCI3120_ENABLE_TIMER2)
+
+#define APCI3120_TIMER2_SELECT_EOS 0xc0
+#define APCI3120_COUNTER 3
+#define APCI3120_DISABLE_ALL_TIMER (APCI3120_DISABLE_TIMER0 & \
+ APCI3120_DISABLE_TIMER1 & \
+ APCI3120_DISABLE_TIMER2)
+
+#define MAX_ANALOGINPUT_CHANNELS 32
+
+struct str_AnalogReadInformation {
+ /* EOC or EOS */
+ unsigned char b_Type;
+ /* Interrupt use or not */
+ unsigned char b_InterruptFlag;
+ /* Selection of the conversion time */
+ unsigned int ui_ConvertTiming;
+ /* Number of channel to read */
+ unsigned char b_NbrOfChannel;
+ /* Number of the channel to be read */
+ unsigned int ui_ChannelList[MAX_ANALOGINPUT_CHANNELS];
+ /* Gain of each channel */
+ unsigned int ui_RangeList[MAX_ANALOGINPUT_CHANNELS];
+};
+
+/* ANALOG INPUT RANGE */
+static const struct comedi_lrange range_apci3120_ai = {
+ 8, {
+ BIP_RANGE(10),
+ BIP_RANGE(5),
+ BIP_RANGE(2),
+ BIP_RANGE(1),
+ UNI_RANGE(10),
+ UNI_RANGE(5),
+ UNI_RANGE(2),
+ UNI_RANGE(1)
+ }
+};
+
+/* ANALOG OUTPUT RANGE */
+static const struct comedi_lrange range_apci3120_ao = {
+ 2, {
+ BIP_RANGE(10),
+ UNI_RANGE(10)
+ }
+};
+
/* FUNCTION DEFINITIONS */
@@ -55,28 +250,13 @@
+----------------------------------------------------------------------------+
*/
-/*
-+----------------------------------------------------------------------------+
-| Function name :int i_APCI3120_InsnConfigAnalogInput(struct comedi_device *dev,|
-| struct comedi_subdevice *s,struct comedi_insn *insn,unsigned int *data) |
-| |
-+----------------------------------------------------------------------------+
-| Task : Calls card specific function |
-| |
-+----------------------------------------------------------------------------+
-| Input Parameters : struct comedi_device *dev |
-| struct comedi_subdevice *s |
-| struct comedi_insn *insn |
-| unsigned int *data |
-+----------------------------------------------------------------------------+
-| Return Value : |
-| |
-+----------------------------------------------------------------------------+
-*/
-
-int i_APCI3120_InsnConfigAnalogInput(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data)
+static int i_APCI3120_InsnConfigAnalogInput(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
{
+ const struct addi_board *this_board = comedi_board(dev);
+ struct addi_private *devpriv = dev->private;
unsigned int i;
if ((data[0] != APCI3120_EOC_MODE) && (data[0] != APCI3120_EOS_MODE))
@@ -91,7 +271,7 @@
for (i = 0; i < data[3]; i++) {
if (CR_CHAN(data[4 + i]) >=
- devpriv->s_EeParameters.i_NbrAiChannel) {
+ this_board->i_NbrAiChannel) {
printk("bad channel list\n");
return -2;
}
@@ -121,31 +301,72 @@
}
/*
-+----------------------------------------------------------------------------+
-| Function name :int i_APCI3120_InsnReadAnalogInput(struct comedi_device *dev, |
-| struct comedi_subdevice *s,struct comedi_insn *insn, unsigned int *data) |
-| |
-+----------------------------------------------------------------------------+
-| Task : card specific function |
-| Reads analog input in synchronous mode |
-| EOC and EOS is selected as per configured |
-| if no conversion time is set uses default conversion |
-| time 10 microsec. |
-| |
-+----------------------------------------------------------------------------+
-| Input Parameters : struct comedi_device *dev |
-| struct comedi_subdevice *s |
-| struct comedi_insn *insn |
-| unsigned int *data |
-+----------------------------------------------------------------------------+
-| Return Value : |
-| |
-+----------------------------------------------------------------------------+
-*/
-
-int i_APCI3120_InsnReadAnalogInput(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data)
+ * This function will first check channel list is ok or not and then
+ * initialize the sequence RAM with the polarity, Gain,Channel number.
+ * If the last argument of function "check"is 1 then it only checks
+ * the channel list is ok or not.
+ */
+static int i_APCI3120_SetupChannelList(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ int n_chan,
+ unsigned int *chanlist,
+ char check)
{
+ struct addi_private *devpriv = dev->private;
+ unsigned int i; /* , differencial=0, bipolar=0; */
+ unsigned int gain;
+ unsigned short us_TmpValue;
+
+ /* correct channel and range number check itself comedi/range.c */
+ if (n_chan < 1) {
+ if (!check)
+ comedi_error(dev, "range/channel list is empty!");
+ return 0;
+ }
+ /* All is ok, so we can setup channel/range list */
+ if (check)
+ return 1;
+
+ /* Code to set the PA and PR...Here it set PA to 0.. */
+ devpriv->us_OutputRegister =
+ devpriv->us_OutputRegister & APCI3120_CLEAR_PA_PR;
+ devpriv->us_OutputRegister = ((n_chan - 1) & 0xf) << 8;
+ outw(devpriv->us_OutputRegister, dev->iobase + APCI3120_WR_ADDRESS);
+
+ for (i = 0; i < n_chan; i++) {
+ /* store range list to card */
+ us_TmpValue = CR_CHAN(chanlist[i]); /* get channel number; */
+
+ if (CR_RANGE(chanlist[i]) < APCI3120_BIPOLAR_RANGES)
+ us_TmpValue &= ((~APCI3120_UNIPOLAR) & 0xff); /* set bipolar */
+ else
+ us_TmpValue |= APCI3120_UNIPOLAR; /* enable unipolar...... */
+
+ gain = CR_RANGE(chanlist[i]); /* get gain number */
+ us_TmpValue |= ((gain & 0x03) << 4); /* <<4 for G0 and G1 bit in RAM */
+ us_TmpValue |= i << 8; /* To select the RAM LOCATION.... */
+ outw(us_TmpValue, dev->iobase + APCI3120_SEQ_RAM_ADDRESS);
+
+ printk("\n Gain = %i",
+ (((unsigned char)CR_RANGE(chanlist[i]) & 0x03) << 2));
+ printk("\n Channel = %i", CR_CHAN(chanlist[i]));
+ printk("\n Polarity = %i", us_TmpValue & APCI3120_UNIPOLAR);
+ }
+ return 1; /* we can serve this with scan logic */
+}
+
+/*
+ * Reads analog input in synchronous mode EOC and EOS is selected
+ * as per configured if no conversion time is set uses default
+ * conversion time 10 microsec.
+ */
+static int i_APCI3120_InsnReadAnalogInput(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
+{
+ const struct addi_board *this_board = comedi_board(dev);
+ struct addi_private *devpriv = dev->private;
unsigned short us_ConvertTiming, us_TmpValue, i;
unsigned char b_Tmp;
@@ -387,26 +608,86 @@
}
-/*
-+----------------------------------------------------------------------------+
-| Function name :int i_APCI3120_StopCyclicAcquisition(struct comedi_device *dev,|
-| struct comedi_subdevice *s)|
-| |
-+----------------------------------------------------------------------------+
-| Task : Stops Cyclic acquisition |
-| |
-+----------------------------------------------------------------------------+
-| Input Parameters : struct comedi_device *dev |
-| struct comedi_subdevice *s |
-| |
-+----------------------------------------------------------------------------+
-| Return Value :0 |
-| |
-+----------------------------------------------------------------------------+
-*/
-
-int i_APCI3120_StopCyclicAcquisition(struct comedi_device *dev, struct comedi_subdevice *s)
+static int i_APCI3120_Reset(struct comedi_device *dev)
{
+ struct addi_private *devpriv = dev->private;
+ unsigned int i;
+ unsigned short us_TmpValue;
+
+ devpriv->b_AiCyclicAcquisition = APCI3120_DISABLE;
+ devpriv->b_EocEosInterrupt = APCI3120_DISABLE;
+ devpriv->b_InterruptMode = APCI3120_EOC_MODE;
+ devpriv->ui_EocEosConversionTime = 0; /* set eoc eos conv time to 0 */
+ devpriv->b_OutputMemoryStatus = 0;
+
+ /* variables used in timer subdevice */
+ devpriv->b_Timer2Mode = 0;
+ devpriv->b_Timer2Interrupt = 0;
+ devpriv->b_ExttrigEnable = 0; /* Disable ext trigger */
+
+ /* Disable all interrupts, watchdog for the anolog output */
+ devpriv->b_ModeSelectRegister = 0;
+ outb(devpriv->b_ModeSelectRegister,
+ dev->iobase + APCI3120_WRITE_MODE_SELECT);
+
+ /* Disables all counters, ext trigger and clears PA, PR */
+ devpriv->us_OutputRegister = 0;
+ outw(devpriv->us_OutputRegister, dev->iobase + APCI3120_WR_ADDRESS);
+
+/*
+ * Code to set the all anolog o/p channel to 0v 8191 is decimal
+ * value for zero(0 v)volt in bipolar mode(default)
+ */
+ outw(8191 | APCI3120_ANALOG_OP_CHANNEL_1, dev->iobase + APCI3120_ANALOG_OUTPUT_1); /* channel 1 */
+ outw(8191 | APCI3120_ANALOG_OP_CHANNEL_2, dev->iobase + APCI3120_ANALOG_OUTPUT_1); /* channel 2 */
+ outw(8191 | APCI3120_ANALOG_OP_CHANNEL_3, dev->iobase + APCI3120_ANALOG_OUTPUT_1); /* channel 3 */
+ outw(8191 | APCI3120_ANALOG_OP_CHANNEL_4, dev->iobase + APCI3120_ANALOG_OUTPUT_1); /* channel 4 */
+
+ outw(8191 | APCI3120_ANALOG_OP_CHANNEL_5, dev->iobase + APCI3120_ANALOG_OUTPUT_2); /* channel 5 */
+ outw(8191 | APCI3120_ANALOG_OP_CHANNEL_6, dev->iobase + APCI3120_ANALOG_OUTPUT_2); /* channel 6 */
+ outw(8191 | APCI3120_ANALOG_OP_CHANNEL_7, dev->iobase + APCI3120_ANALOG_OUTPUT_2); /* channel 7 */
+ outw(8191 | APCI3120_ANALOG_OP_CHANNEL_8, dev->iobase + APCI3120_ANALOG_OUTPUT_2); /* channel 8 */
+
+ /* Reset digital output to L0W */
+
+/* ES05 outb(0x0,dev->iobase+APCI3120_DIGITAL_OUTPUT); */
+ udelay(10);
+
+ inw(dev->iobase + 0); /* make a dummy read */
+ inb(dev->iobase + APCI3120_RESET_FIFO); /* flush FIFO */
+ inw(dev->iobase + APCI3120_RD_STATUS); /* flush A/D status register */
+
+ /* code to reset the RAM sequence */
+ for (i = 0; i < 16; i++) {
+ us_TmpValue = i << 8; /* select the location */
+ outw(us_TmpValue, dev->iobase + APCI3120_SEQ_RAM_ADDRESS);
+ }
+ return 0;
+}
+
+static int i_APCI3120_ExttrigEnable(struct comedi_device *dev)
+{
+ struct addi_private *devpriv = dev->private;
+
+ devpriv->us_OutputRegister |= APCI3120_ENABLE_EXT_TRIGGER;
+ outw(devpriv->us_OutputRegister, dev->iobase + APCI3120_WR_ADDRESS);
+ return 0;
+}
+
+static int i_APCI3120_ExttrigDisable(struct comedi_device *dev)
+{
+ struct addi_private *devpriv = dev->private;
+
+ devpriv->us_OutputRegister &= ~APCI3120_ENABLE_EXT_TRIGGER;
+ outw(devpriv->us_OutputRegister, dev->iobase + APCI3120_WR_ADDRESS);
+ return 0;
+}
+
+static int i_APCI3120_StopCyclicAcquisition(struct comedi_device *dev,
+ struct comedi_subdevice *s)
+{
+ struct addi_private *devpriv = dev->private;
+
/* Disable A2P Fifo write and AMWEN signal */
outw(0, devpriv->i_IobaseAddon + 4);
@@ -456,28 +737,11 @@
return 0;
}
-/*
-+----------------------------------------------------------------------------+
-| Function name :int i_APCI3120_CommandTestAnalogInput(struct comedi_device *dev|
-| ,struct comedi_subdevice *s,struct comedi_cmd *cmd) |
-| |
-+----------------------------------------------------------------------------+
-| Task : Test validity for a command for cyclic anlog input |
-| acquisition |
-| |
-+----------------------------------------------------------------------------+
-| Input Parameters : struct comedi_device *dev |
-| struct comedi_subdevice *s |
-| struct comedi_cmd *cmd |
-+----------------------------------------------------------------------------+
-| Return Value :0 |
-| |
-+----------------------------------------------------------------------------+
-*/
-
-int i_APCI3120_CommandTestAnalogInput(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_cmd *cmd)
+static int i_APCI3120_CommandTestAnalogInput(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_cmd *cmd)
{
+ const struct addi_board *this_board = comedi_board(dev);
int err = 0;
/* Step 1 : check if triggers are trivially valid */
@@ -503,63 +767,32 @@
if (err)
return 2;
- /* step 3: make sure arguments are trivially compatible */
+ /* Step 3: check if arguments are trivially valid */
- if (cmd->start_arg != 0) {
- cmd->start_arg = 0;
- err++;
- }
+ err |= cfc_check_trigger_arg_is(&cmd->start_arg, 0);
- if (cmd->scan_begin_src == TRIG_TIMER) { /* Test Delay timing */
- if (cmd->scan_begin_arg <
- devpriv->s_EeParameters.ui_MinDelaytimeNs) {
- cmd->scan_begin_arg =
- devpriv->s_EeParameters.ui_MinDelaytimeNs;
- err++;
- }
- }
+ if (cmd->scan_begin_src == TRIG_TIMER) /* Test Delay timing */
+ err |= cfc_check_trigger_arg_min(&cmd->scan_begin_arg, 100000);
if (cmd->convert_src == TRIG_TIMER) { /* Test Acquisition timing */
if (cmd->scan_begin_src == TRIG_TIMER) {
- if ((cmd->convert_arg)
- && (cmd->convert_arg <
- devpriv->s_EeParameters.
- ui_MinAcquisitiontimeNs)) {
- cmd->convert_arg = devpriv->s_EeParameters.
- ui_MinAcquisitiontimeNs;
- err++;
- }
+ if (cmd->convert_arg)
+ err |= cfc_check_trigger_arg_min(
+ &cmd->convert_arg, 10000);
} else {
- if (cmd->convert_arg <
- devpriv->s_EeParameters.ui_MinAcquisitiontimeNs
- ) {
- cmd->convert_arg = devpriv->s_EeParameters.
- ui_MinAcquisitiontimeNs;
- err++;
-
- }
+ err |= cfc_check_trigger_arg_min(&cmd->convert_arg,
+ 10000);
}
}
- if (!cmd->chanlist_len) {
- cmd->chanlist_len = 1;
- err++;
- }
- if (cmd->chanlist_len > this_board->i_AiChannelList) {
- cmd->chanlist_len = this_board->i_AiChannelList;
- err++;
- }
- if (cmd->stop_src == TRIG_COUNT) {
- if (!cmd->stop_arg) {
- cmd->stop_arg = 1;
- err++;
- }
- } else { /* TRIG_NONE */
- if (cmd->stop_arg != 0) {
- cmd->stop_arg = 0;
- err++;
- }
- }
+ err |= cfc_check_trigger_arg_min(&cmd->chanlist_len, 1);
+ err |= cfc_check_trigger_arg_max(&cmd->chanlist_len,
+ this_board->i_AiChannelList);
+
+ if (cmd->stop_src == TRIG_COUNT)
+ err |= cfc_check_trigger_arg_min(&cmd->stop_arg, 1);
+ else /* TRIG_NONE */
+ err |= cfc_check_trigger_arg_is(&cmd->stop_arg, 0);
if (err)
return 3;
@@ -584,100 +817,17 @@
}
/*
-+----------------------------------------------------------------------------+
-| Function name : int i_APCI3120_CommandAnalogInput(struct comedi_device *dev, |
-| struct comedi_subdevice *s) |
-| |
-+----------------------------------------------------------------------------+
-| Task : Does asynchronous acquisition |
-| Determines the mode 1 or 2. |
-| |
-+----------------------------------------------------------------------------+
-| Input Parameters : struct comedi_device *dev |
-| struct comedi_subdevice *s |
-| |
-+----------------------------------------------------------------------------+
-| Return Value : |
-| |
-+----------------------------------------------------------------------------+
-*/
-
-int i_APCI3120_CommandAnalogInput(struct comedi_device *dev, struct comedi_subdevice *s)
+ * This is used for analog input cyclic acquisition.
+ * Performs the command operations.
+ * If DMA is configured does DMA initialization otherwise does the
+ * acquisition with EOS interrupt.
+ */
+static int i_APCI3120_CyclicAnalogInput(int mode,
+ struct comedi_device *dev,
+ struct comedi_subdevice *s)
{
- struct comedi_cmd *cmd = &s->async->cmd;
-
- /* loading private structure with cmd structure inputs */
- devpriv->ui_AiFlags = cmd->flags;
- devpriv->ui_AiNbrofChannels = cmd->chanlist_len;
- devpriv->ui_AiScanLength = cmd->scan_end_arg;
- devpriv->pui_AiChannelList = cmd->chanlist;
-
- /* UPDATE-0.7.57->0.7.68devpriv->AiData=s->async->data; */
- devpriv->AiData = s->async->prealloc_buf;
- /* UPDATE-0.7.57->0.7.68devpriv->ui_AiDataLength=s->async->data_len; */
- devpriv->ui_AiDataLength = s->async->prealloc_bufsz;
-
- if (cmd->stop_src == TRIG_COUNT)
- devpriv->ui_AiNbrofScans = cmd->stop_arg;
- else
- devpriv->ui_AiNbrofScans = 0;
-
- devpriv->ui_AiTimer0 = 0; /* variables changed to timer0,timer1 */
- devpriv->ui_AiTimer1 = 0;
- if ((devpriv->ui_AiNbrofScans == 0) || (devpriv->ui_AiNbrofScans == -1))
- devpriv->b_AiContinuous = 1; /* user want neverending analog acquisition */
- /* stopped using cancel */
-
- if (cmd->start_src == TRIG_EXT)
- devpriv->b_ExttrigEnable = APCI3120_ENABLE;
- else
- devpriv->b_ExttrigEnable = APCI3120_DISABLE;
-
- if (cmd->scan_begin_src == TRIG_FOLLOW) {
- /* mode 1 or 3 */
- if (cmd->convert_src == TRIG_TIMER) {
- /* mode 1 */
-
- devpriv->ui_AiTimer0 = cmd->convert_arg; /* timer constant in nano seconds */
- /* return this_board->ai_cmd(1,dev,s); */
- return i_APCI3120_CyclicAnalogInput(1, dev, s);
- }
-
- }
- if ((cmd->scan_begin_src == TRIG_TIMER)
- && (cmd->convert_src == TRIG_TIMER)) {
- /* mode 2 */
- devpriv->ui_AiTimer1 = cmd->scan_begin_arg;
- devpriv->ui_AiTimer0 = cmd->convert_arg; /* variable changed timer2 to timer0 */
- /* return this_board->ai_cmd(2,dev,s); */
- return i_APCI3120_CyclicAnalogInput(2, dev, s);
- }
- return -1;
-}
-
-/*
-+----------------------------------------------------------------------------+
-| Function name : int i_APCI3120_CyclicAnalogInput(int mode, |
-| struct comedi_device * dev,struct comedi_subdevice * s) |
-+----------------------------------------------------------------------------+
-| Task : This is used for analog input cyclic acquisition |
-| Performs the command operations. |
-| If DMA is configured does DMA initialization |
-| otherwise does the acquisition with EOS interrupt. |
-| |
-+----------------------------------------------------------------------------+
-| Input Parameters : |
-| |
-| |
-+----------------------------------------------------------------------------+
-| Return Value : |
-| |
-+----------------------------------------------------------------------------+
-*/
-
-int i_APCI3120_CyclicAnalogInput(int mode, struct comedi_device *dev,
- struct comedi_subdevice *s)
-{
+ const struct addi_board *this_board = comedi_board(dev);
+ struct addi_private *devpriv = dev->private;
unsigned char b_Tmp;
unsigned int ui_Tmp, ui_DelayTiming = 0, ui_TimerValue1 = 0, dmalen0 =
0, dmalen1 = 0, ui_TimerValue2 =
@@ -1186,241 +1336,277 @@
}
/*
-+----------------------------------------------------------------------------+
-| intERNAL FUNCTIONS |
-+----------------------------------------------------------------------------+
-*/
-
-/*
-+----------------------------------------------------------------------------+
-| Function name : int i_APCI3120_Reset(struct comedi_device *dev) |
-| |
-| |
-+----------------------------------------------------------------------------+
-| Task : Hardware reset function |
-| |
-+----------------------------------------------------------------------------+
-| Input Parameters : struct comedi_device *dev |
-| |
-| |
-+----------------------------------------------------------------------------+
-| Return Value : |
-| |
-+----------------------------------------------------------------------------+
-*/
-
-int i_APCI3120_Reset(struct comedi_device *dev)
-{
- unsigned int i;
- unsigned short us_TmpValue;
-
- devpriv->b_AiCyclicAcquisition = APCI3120_DISABLE;
- devpriv->b_EocEosInterrupt = APCI3120_DISABLE;
- devpriv->b_InterruptMode = APCI3120_EOC_MODE;
- devpriv->ui_EocEosConversionTime = 0; /* set eoc eos conv time to 0 */
- devpriv->b_OutputMemoryStatus = 0;
-
- /* variables used in timer subdevice */
- devpriv->b_Timer2Mode = 0;
- devpriv->b_Timer2Interrupt = 0;
- devpriv->b_ExttrigEnable = 0; /* Disable ext trigger */
-
- /* Disable all interrupts, watchdog for the anolog output */
- devpriv->b_ModeSelectRegister = 0;
- outb(devpriv->b_ModeSelectRegister,
- dev->iobase + APCI3120_WRITE_MODE_SELECT);
-
- /* Disables all counters, ext trigger and clears PA, PR */
- devpriv->us_OutputRegister = 0;
- outw(devpriv->us_OutputRegister, dev->iobase + APCI3120_WR_ADDRESS);
-
-/*
- * Code to set the all anolog o/p channel to 0v 8191 is decimal
- * value for zero(0 v)volt in bipolar mode(default)
+ * Does asynchronous acquisition.
+ * Determines the mode 1 or 2.
*/
- outw(8191 | APCI3120_ANALOG_OP_CHANNEL_1, dev->iobase + APCI3120_ANALOG_OUTPUT_1); /* channel 1 */
- outw(8191 | APCI3120_ANALOG_OP_CHANNEL_2, dev->iobase + APCI3120_ANALOG_OUTPUT_1); /* channel 2 */
- outw(8191 | APCI3120_ANALOG_OP_CHANNEL_3, dev->iobase + APCI3120_ANALOG_OUTPUT_1); /* channel 3 */
- outw(8191 | APCI3120_ANALOG_OP_CHANNEL_4, dev->iobase + APCI3120_ANALOG_OUTPUT_1); /* channel 4 */
-
- outw(8191 | APCI3120_ANALOG_OP_CHANNEL_5, dev->iobase + APCI3120_ANALOG_OUTPUT_2); /* channel 5 */
- outw(8191 | APCI3120_ANALOG_OP_CHANNEL_6, dev->iobase + APCI3120_ANALOG_OUTPUT_2); /* channel 6 */
- outw(8191 | APCI3120_ANALOG_OP_CHANNEL_7, dev->iobase + APCI3120_ANALOG_OUTPUT_2); /* channel 7 */
- outw(8191 | APCI3120_ANALOG_OP_CHANNEL_8, dev->iobase + APCI3120_ANALOG_OUTPUT_2); /* channel 8 */
-
- /* Reset digital output to L0W */
-
-/* ES05 outb(0x0,dev->iobase+APCI3120_DIGITAL_OUTPUT); */
- udelay(10);
-
- inw(dev->iobase + 0); /* make a dummy read */
- inb(dev->iobase + APCI3120_RESET_FIFO); /* flush FIFO */
- inw(dev->iobase + APCI3120_RD_STATUS); /* flush A/D status register */
-
- /* code to reset the RAM sequence */
- for (i = 0; i < 16; i++) {
- us_TmpValue = i << 8; /* select the location */
- outw(us_TmpValue, dev->iobase + APCI3120_SEQ_RAM_ADDRESS);
- }
- return 0;
-}
-
-/*
-+----------------------------------------------------------------------------+
-| Function name : int i_APCI3120_SetupChannelList(struct comedi_device * dev, |
-| struct comedi_subdevice * s, int n_chan,unsigned int *chanlist|
-| ,char check) |
-| |
-+----------------------------------------------------------------------------+
-| Task :This function will first check channel list is ok or not|
-|and then initialize the sequence RAM with the polarity, Gain,Channel number |
-|If the last argument of function "check"is 1 then it only checks the channel|
-|list is ok or not. |
-| |
-+----------------------------------------------------------------------------+
-| Input Parameters : struct comedi_device * dev |
-| struct comedi_subdevice * s |
-| int n_chan |
- unsigned int *chanlist
- char check
-+----------------------------------------------------------------------------+
-| Return Value : |
-| |
-+----------------------------------------------------------------------------+
-*/
-
-int i_APCI3120_SetupChannelList(struct comedi_device *dev, struct comedi_subdevice *s,
- int n_chan, unsigned int *chanlist, char check)
+static int i_APCI3120_CommandAnalogInput(struct comedi_device *dev,
+ struct comedi_subdevice *s)
{
- unsigned int i; /* , differencial=0, bipolar=0; */
- unsigned int gain;
- unsigned short us_TmpValue;
+ struct addi_private *devpriv = dev->private;
+ struct comedi_cmd *cmd = &s->async->cmd;
- /* correct channel and range number check itself comedi/range.c */
- if (n_chan < 1) {
- if (!check)
- comedi_error(dev, "range/channel list is empty!");
- return 0;
+ /* loading private structure with cmd structure inputs */
+ devpriv->ui_AiFlags = cmd->flags;
+ devpriv->ui_AiNbrofChannels = cmd->chanlist_len;
+ devpriv->ui_AiScanLength = cmd->scan_end_arg;
+ devpriv->pui_AiChannelList = cmd->chanlist;
+
+ /* UPDATE-0.7.57->0.7.68devpriv->AiData=s->async->data; */
+ devpriv->AiData = s->async->prealloc_buf;
+ /* UPDATE-0.7.57->0.7.68devpriv->ui_AiDataLength=s->async->data_len; */
+ devpriv->ui_AiDataLength = s->async->prealloc_bufsz;
+
+ if (cmd->stop_src == TRIG_COUNT)
+ devpriv->ui_AiNbrofScans = cmd->stop_arg;
+ else
+ devpriv->ui_AiNbrofScans = 0;
+
+ devpriv->ui_AiTimer0 = 0; /* variables changed to timer0,timer1 */
+ devpriv->ui_AiTimer1 = 0;
+ if ((devpriv->ui_AiNbrofScans == 0) || (devpriv->ui_AiNbrofScans == -1))
+ devpriv->b_AiContinuous = 1; /* user want neverending analog acquisition */
+ /* stopped using cancel */
+
+ if (cmd->start_src == TRIG_EXT)
+ devpriv->b_ExttrigEnable = APCI3120_ENABLE;
+ else
+ devpriv->b_ExttrigEnable = APCI3120_DISABLE;
+
+ if (cmd->scan_begin_src == TRIG_FOLLOW) {
+ /* mode 1 or 3 */
+ if (cmd->convert_src == TRIG_TIMER) {
+ /* mode 1 */
+
+ devpriv->ui_AiTimer0 = cmd->convert_arg; /* timer constant in nano seconds */
+ /* return this_board->ai_cmd(1,dev,s); */
+ return i_APCI3120_CyclicAnalogInput(1, dev, s);
+ }
+
}
- /* All is ok, so we can setup channel/range list */
- if (check)
- return 1;
-
- /* Code to set the PA and PR...Here it set PA to 0.. */
- devpriv->us_OutputRegister =
- devpriv->us_OutputRegister & APCI3120_CLEAR_PA_PR;
- devpriv->us_OutputRegister = ((n_chan - 1) & 0xf) << 8;
- outw(devpriv->us_OutputRegister, dev->iobase + APCI3120_WR_ADDRESS);
-
- for (i = 0; i < n_chan; i++) {
- /* store range list to card */
- us_TmpValue = CR_CHAN(chanlist[i]); /* get channel number; */
-
- if (CR_RANGE(chanlist[i]) < APCI3120_BIPOLAR_RANGES)
- us_TmpValue &= ((~APCI3120_UNIPOLAR) & 0xff); /* set bipolar */
- else
- us_TmpValue |= APCI3120_UNIPOLAR; /* enable unipolar...... */
-
- gain = CR_RANGE(chanlist[i]); /* get gain number */
- us_TmpValue |= ((gain & 0x03) << 4); /* <<4 for G0 and G1 bit in RAM */
- us_TmpValue |= i << 8; /* To select the RAM LOCATION.... */
- outw(us_TmpValue, dev->iobase + APCI3120_SEQ_RAM_ADDRESS);
-
- printk("\n Gain = %i",
- (((unsigned char)CR_RANGE(chanlist[i]) & 0x03) << 2));
- printk("\n Channel = %i", CR_CHAN(chanlist[i]));
- printk("\n Polarity = %i", us_TmpValue & APCI3120_UNIPOLAR);
+ if ((cmd->scan_begin_src == TRIG_TIMER)
+ && (cmd->convert_src == TRIG_TIMER)) {
+ /* mode 2 */
+ devpriv->ui_AiTimer1 = cmd->scan_begin_arg;
+ devpriv->ui_AiTimer0 = cmd->convert_arg; /* variable changed timer2 to timer0 */
+ /* return this_board->ai_cmd(2,dev,s); */
+ return i_APCI3120_CyclicAnalogInput(2, dev, s);
}
- return 1; /* we can serve this with scan logic */
+ return -1;
}
/*
-+----------------------------------------------------------------------------+
-| Function name : int i_APCI3120_ExttrigEnable(struct comedi_device * dev) |
-| |
-| |
-+----------------------------------------------------------------------------+
-| Task : Enable the external trigger |
-| |
-+----------------------------------------------------------------------------+
-| Input Parameters : struct comedi_device * dev |
-| |
-| |
-+----------------------------------------------------------------------------+
-| Return Value : 0 |
-| |
-+----------------------------------------------------------------------------+
-*/
-
-int i_APCI3120_ExttrigEnable(struct comedi_device *dev)
+ * This function copies the data from DMA buffer to the Comedi buffer.
+ */
+static void v_APCI3120_InterruptDmaMoveBlock16bit(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ short *dma_buffer,
+ unsigned int num_samples)
{
+ struct addi_private *devpriv = dev->private;
- devpriv->us_OutputRegister |= APCI3120_ENABLE_EXT_TRIGGER;
- outw(devpriv->us_OutputRegister, dev->iobase + APCI3120_WR_ADDRESS);
- return 0;
+ devpriv->ui_AiActualScan +=
+ (s->async->cur_chan + num_samples) / devpriv->ui_AiScanLength;
+ s->async->cur_chan += num_samples;
+ s->async->cur_chan %= devpriv->ui_AiScanLength;
+
+ cfc_write_array_to_buffer(s, dma_buffer, num_samples * sizeof(short));
}
/*
-+----------------------------------------------------------------------------+
-| Function name : int i_APCI3120_ExttrigDisable(struct comedi_device * dev) |
-| |
-+----------------------------------------------------------------------------+
-| Task : Disables the external trigger |
-| |
-+----------------------------------------------------------------------------+
-| Input Parameters : struct comedi_device * dev |
-| |
-| |
-+----------------------------------------------------------------------------+
-| Return Value : 0 |
-| |
-+----------------------------------------------------------------------------+
-*/
-
-int i_APCI3120_ExttrigDisable(struct comedi_device *dev)
-{
- devpriv->us_OutputRegister &= ~APCI3120_ENABLE_EXT_TRIGGER;
- outw(devpriv->us_OutputRegister, dev->iobase + APCI3120_WR_ADDRESS);
- return 0;
-}
-
-/*
-+----------------------------------------------------------------------------+
-| intERRUPT FUNCTIONS |
-+----------------------------------------------------------------------------+
-*/
-
-/*
-+----------------------------------------------------------------------------+
-| Function name : void v_APCI3120_Interrupt(int irq, void *d) |
-| |
-| |
-+----------------------------------------------------------------------------+
-| Task :Interrupt handler for APCI3120 |
-| When interrupt occurs this gets called. |
-| First it finds which interrupt has been generated and |
-| handles corresponding interrupt |
-| |
-+----------------------------------------------------------------------------+
-| Input Parameters : int irq |
-| void *d |
-| |
-+----------------------------------------------------------------------------+
-| Return Value : void |
-| |
-+----------------------------------------------------------------------------+
-*/
-
-void v_APCI3120_Interrupt(int irq, void *d)
+ * This is a handler for the DMA interrupt.
+ * This function copies the data to Comedi Buffer.
+ * For continuous DMA it reinitializes the DMA operation.
+ * For single mode DMA it stop the acquisition.
+ */
+static void v_APCI3120_InterruptDma(int irq, void *d)
{
struct comedi_device *dev = d;
- unsigned short int_daq;
+ struct addi_private *devpriv = dev->private;
+ struct comedi_subdevice *s = &dev->subdevices[0];
+ unsigned int next_dma_buf, samplesinbuf;
+ unsigned long low_word, high_word, var;
+ unsigned int ui_Tmp;
+ samplesinbuf =
+ devpriv->ui_DmaBufferUsesize[devpriv->ui_DmaActualBuffer] -
+ inl(devpriv->i_IobaseAmcc + AMCC_OP_REG_MWTC);
+
+ if (samplesinbuf <
+ devpriv->ui_DmaBufferUsesize[devpriv->ui_DmaActualBuffer]) {
+ comedi_error(dev, "Interrupted DMA transfer!");
+ }
+ if (samplesinbuf & 1) {
+ comedi_error(dev, "Odd count of bytes in DMA ring!");
+ i_APCI3120_StopCyclicAcquisition(dev, s);
+ devpriv->b_AiCyclicAcquisition = APCI3120_DISABLE;
+
+ return;
+ }
+ samplesinbuf = samplesinbuf >> 1; /* number of received samples */
+ if (devpriv->b_DmaDoubleBuffer) {
+ /* switch DMA buffers if is used double buffering */
+ next_dma_buf = 1 - devpriv->ui_DmaActualBuffer;
+
+ ui_Tmp = AGCSTS_TC_ENABLE | AGCSTS_RESET_A2P_FIFO;
+ outl(ui_Tmp, devpriv->i_IobaseAddon + AMCC_OP_REG_AGCSTS);
+
+ /* changed since 16 bit interface for add on */
+ outw(APCI3120_ADD_ON_AGCSTS_LOW, devpriv->i_IobaseAddon + 0);
+ outw(APCI3120_ENABLE_TRANSFER_ADD_ON_LOW,
+ devpriv->i_IobaseAddon + 2);
+ outw(APCI3120_ADD_ON_AGCSTS_HIGH, devpriv->i_IobaseAddon + 0);
+ outw(APCI3120_ENABLE_TRANSFER_ADD_ON_HIGH, devpriv->i_IobaseAddon + 2); /* 0x1000 is out putted in windows driver */
+
+ var = devpriv->ul_DmaBufferHw[next_dma_buf];
+ low_word = var & 0xffff;
+ var = devpriv->ul_DmaBufferHw[next_dma_buf];
+ high_word = var / 65536;
+
+ /* DMA Start Address Low */
+ outw(APCI3120_ADD_ON_MWAR_LOW, devpriv->i_IobaseAddon + 0);
+ outw(low_word, devpriv->i_IobaseAddon + 2);
+
+ /* DMA Start Address High */
+ outw(APCI3120_ADD_ON_MWAR_HIGH, devpriv->i_IobaseAddon + 0);
+ outw(high_word, devpriv->i_IobaseAddon + 2);
+
+ var = devpriv->ui_DmaBufferUsesize[next_dma_buf];
+ low_word = var & 0xffff;
+ var = devpriv->ui_DmaBufferUsesize[next_dma_buf];
+ high_word = var / 65536;
+
+ /* Nbr of acquisition LOW */
+ outw(APCI3120_ADD_ON_MWTC_LOW, devpriv->i_IobaseAddon + 0);
+ outw(low_word, devpriv->i_IobaseAddon + 2);
+
+ /* Nbr of acquisition HIGH */
+ outw(APCI3120_ADD_ON_MWTC_HIGH, devpriv->i_IobaseAddon + 0);
+ outw(high_word, devpriv->i_IobaseAddon + 2);
+
+/*
+ * To configure A2P FIFO
+ * ENABLE A2P FIFO WRITE AND ENABLE AMWEN
+ * AMWEN_ENABLE | A2P_FIFO_WRITE_ENABLE (0x01|0x02)=0x03
+ */
+ outw(3, devpriv->i_IobaseAddon + 4);
+ /* initialise end of dma interrupt AINT_WRITE_COMPL = ENABLE_WRITE_TC_INT(ADDI) */
+ outl((APCI3120_FIFO_ADVANCE_ON_BYTE_2 |
+ APCI3120_ENABLE_WRITE_TC_INT),
+ devpriv->i_IobaseAmcc + AMCC_OP_REG_INTCSR);
+
+ }
+ if (samplesinbuf) {
+ v_APCI3120_InterruptDmaMoveBlock16bit(dev, s,
+ devpriv->ul_DmaBufferVirtual[devpriv->
+ ui_DmaActualBuffer], samplesinbuf);
+
+ if (!(devpriv->ui_AiFlags & TRIG_WAKE_EOS)) {
+ s->async->events |= COMEDI_CB_EOS;
+ comedi_event(dev, s);
+ }
+ }
+ if (!devpriv->b_AiContinuous)
+ if (devpriv->ui_AiActualScan >= devpriv->ui_AiNbrofScans) {
+ /* all data sampled */
+ i_APCI3120_StopCyclicAcquisition(dev, s);
+ devpriv->b_AiCyclicAcquisition = APCI3120_DISABLE;
+ s->async->events |= COMEDI_CB_EOA;
+ comedi_event(dev, s);
+ return;
+ }
+
+ if (devpriv->b_DmaDoubleBuffer) { /* switch dma buffers */
+ devpriv->ui_DmaActualBuffer = 1 - devpriv->ui_DmaActualBuffer;
+ } else {
+/*
+ * restart DMA if is not used double buffering
+ * ADDED REINITIALISE THE DMA
+ */
+ ui_Tmp = AGCSTS_TC_ENABLE | AGCSTS_RESET_A2P_FIFO;
+ outl(ui_Tmp, devpriv->i_IobaseAddon + AMCC_OP_REG_AGCSTS);
+
+ /* changed since 16 bit interface for add on */
+ outw(APCI3120_ADD_ON_AGCSTS_LOW, devpriv->i_IobaseAddon + 0);
+ outw(APCI3120_ENABLE_TRANSFER_ADD_ON_LOW,
+ devpriv->i_IobaseAddon + 2);
+ outw(APCI3120_ADD_ON_AGCSTS_HIGH, devpriv->i_IobaseAddon + 0);
+ outw(APCI3120_ENABLE_TRANSFER_ADD_ON_HIGH, devpriv->i_IobaseAddon + 2); /* */
+/*
+ * A2P FIFO MANAGEMENT
+ * A2P fifo reset & transfer control enable
+ */
+ outl(APCI3120_A2P_FIFO_MANAGEMENT,
+ devpriv->i_IobaseAmcc + AMCC_OP_REG_MCSR);
+
+ var = devpriv->ul_DmaBufferHw[0];
+ low_word = var & 0xffff;
+ var = devpriv->ul_DmaBufferHw[0];
+ high_word = var / 65536;
+ outw(APCI3120_ADD_ON_MWAR_LOW, devpriv->i_IobaseAddon + 0);
+ outw(low_word, devpriv->i_IobaseAddon + 2);
+ outw(APCI3120_ADD_ON_MWAR_HIGH, devpriv->i_IobaseAddon + 0);
+ outw(high_word, devpriv->i_IobaseAddon + 2);
+
+ var = devpriv->ui_DmaBufferUsesize[0];
+ low_word = var & 0xffff; /* changed */
+ var = devpriv->ui_DmaBufferUsesize[0];
+ high_word = var / 65536;
+ outw(APCI3120_ADD_ON_MWTC_LOW, devpriv->i_IobaseAddon + 0);
+ outw(low_word, devpriv->i_IobaseAddon + 2);
+ outw(APCI3120_ADD_ON_MWTC_HIGH, devpriv->i_IobaseAddon + 0);
+ outw(high_word, devpriv->i_IobaseAddon + 2);
+
+/*
+ * To configure A2P FIFO
+ * ENABLE A2P FIFO WRITE AND ENABLE AMWEN
+ * AMWEN_ENABLE | A2P_FIFO_WRITE_ENABLE (0x01|0x02)=0x03
+ */
+ outw(3, devpriv->i_IobaseAddon + 4);
+ /* initialise end of dma interrupt AINT_WRITE_COMPL = ENABLE_WRITE_TC_INT(ADDI) */
+ outl((APCI3120_FIFO_ADVANCE_ON_BYTE_2 |
+ APCI3120_ENABLE_WRITE_TC_INT),
+ devpriv->i_IobaseAmcc + AMCC_OP_REG_INTCSR);
+ }
+}
+
+/*
+ * This function handles EOS interrupt.
+ * This function copies the acquired data(from FIFO) to Comedi buffer.
+ */
+static int i_APCI3120_InterruptHandleEos(struct comedi_device *dev)
+{
+ struct addi_private *devpriv = dev->private;
+ int n_chan, i;
+ struct comedi_subdevice *s = &dev->subdevices[0];
+ int err = 1;
+
+ n_chan = devpriv->ui_AiNbrofChannels;
+
+ s->async->events = 0;
+
+ for (i = 0; i < n_chan; i++)
+ err &= comedi_buf_put(s->async, inw(dev->iobase + 0));
+
+ s->async->events |= COMEDI_CB_EOS;
+
+ if (err == 0)
+ s->async->events |= COMEDI_CB_OVERFLOW;
+
+ comedi_event(dev, s);
+
+ return 0;
+}
+
+static void v_APCI3120_Interrupt(int irq, void *d)
+{
+ struct comedi_device *dev = d;
+ struct addi_private *devpriv = dev->private;
+ unsigned short int_daq;
unsigned int int_amcc, ui_Check, i;
unsigned short us_TmpValue;
unsigned char b_DummyRead;
-
struct comedi_subdevice *s = &dev->subdevices[0];
+
ui_Check = 1;
int_daq = inw(dev->iobase + APCI3120_RD_STATUS) & 0xf000; /* get IRQ reasons */
@@ -1602,284 +1788,20 @@
}
/*
-+----------------------------------------------------------------------------+
-| Function name :int i_APCI3120_InterruptHandleEos(struct comedi_device *dev) |
-| |
-| |
-+----------------------------------------------------------------------------+
-| Task : This function handles EOS interrupt. |
-| This function copies the acquired data(from FIFO) |
-| to Comedi buffer. |
-| |
-+----------------------------------------------------------------------------+
-| Input Parameters : struct comedi_device *dev |
-| |
-| |
-+----------------------------------------------------------------------------+
-| Return Value : 0 |
-| |
-+----------------------------------------------------------------------------+
-*/
-
-
-int i_APCI3120_InterruptHandleEos(struct comedi_device *dev)
-{
- int n_chan, i;
- struct comedi_subdevice *s = &dev->subdevices[0];
- int err = 1;
-
- n_chan = devpriv->ui_AiNbrofChannels;
-
- s->async->events = 0;
-
- for (i = 0; i < n_chan; i++)
- err &= comedi_buf_put(s->async, inw(dev->iobase + 0));
-
- s->async->events |= COMEDI_CB_EOS;
-
- if (err == 0)
- s->async->events |= COMEDI_CB_OVERFLOW;
-
- comedi_event(dev, s);
-
- return 0;
-}
-
-/*
-+----------------------------------------------------------------------------+
-| Function name : void v_APCI3120_InterruptDma(int irq, void *d) |
-| |
-+----------------------------------------------------------------------------+
-| Task : This is a handler for the DMA interrupt |
-| This function copies the data to Comedi Buffer. |
-| For continuous DMA it reinitializes the DMA operation. |
-| For single mode DMA it stop the acquisition. |
-| |
-+----------------------------------------------------------------------------+
-| Input Parameters : int irq, void *d |
-| |
-+----------------------------------------------------------------------------+
-| Return Value : void |
-| |
-+----------------------------------------------------------------------------+
-*/
-
-void v_APCI3120_InterruptDma(int irq, void *d)
-{
- struct comedi_device *dev = d;
- struct comedi_subdevice *s = &dev->subdevices[0];
- unsigned int next_dma_buf, samplesinbuf;
- unsigned long low_word, high_word, var;
-
- unsigned int ui_Tmp;
- samplesinbuf =
- devpriv->ui_DmaBufferUsesize[devpriv->ui_DmaActualBuffer] -
- inl(devpriv->i_IobaseAmcc + AMCC_OP_REG_MWTC);
-
- if (samplesinbuf <
- devpriv->ui_DmaBufferUsesize[devpriv->ui_DmaActualBuffer]) {
- comedi_error(dev, "Interrupted DMA transfer!");
- }
- if (samplesinbuf & 1) {
- comedi_error(dev, "Odd count of bytes in DMA ring!");
- i_APCI3120_StopCyclicAcquisition(dev, s);
- devpriv->b_AiCyclicAcquisition = APCI3120_DISABLE;
-
- return;
- }
- samplesinbuf = samplesinbuf >> 1; /* number of received samples */
- if (devpriv->b_DmaDoubleBuffer) {
- /* switch DMA buffers if is used double buffering */
- next_dma_buf = 1 - devpriv->ui_DmaActualBuffer;
-
- ui_Tmp = AGCSTS_TC_ENABLE | AGCSTS_RESET_A2P_FIFO;
- outl(ui_Tmp, devpriv->i_IobaseAddon + AMCC_OP_REG_AGCSTS);
-
- /* changed since 16 bit interface for add on */
- outw(APCI3120_ADD_ON_AGCSTS_LOW, devpriv->i_IobaseAddon + 0);
- outw(APCI3120_ENABLE_TRANSFER_ADD_ON_LOW,
- devpriv->i_IobaseAddon + 2);
- outw(APCI3120_ADD_ON_AGCSTS_HIGH, devpriv->i_IobaseAddon + 0);
- outw(APCI3120_ENABLE_TRANSFER_ADD_ON_HIGH, devpriv->i_IobaseAddon + 2); /* 0x1000 is out putted in windows driver */
-
- var = devpriv->ul_DmaBufferHw[next_dma_buf];
- low_word = var & 0xffff;
- var = devpriv->ul_DmaBufferHw[next_dma_buf];
- high_word = var / 65536;
-
- /* DMA Start Address Low */
- outw(APCI3120_ADD_ON_MWAR_LOW, devpriv->i_IobaseAddon + 0);
- outw(low_word, devpriv->i_IobaseAddon + 2);
-
- /* DMA Start Address High */
- outw(APCI3120_ADD_ON_MWAR_HIGH, devpriv->i_IobaseAddon + 0);
- outw(high_word, devpriv->i_IobaseAddon + 2);
-
- var = devpriv->ui_DmaBufferUsesize[next_dma_buf];
- low_word = var & 0xffff;
- var = devpriv->ui_DmaBufferUsesize[next_dma_buf];
- high_word = var / 65536;
-
- /* Nbr of acquisition LOW */
- outw(APCI3120_ADD_ON_MWTC_LOW, devpriv->i_IobaseAddon + 0);
- outw(low_word, devpriv->i_IobaseAddon + 2);
-
- /* Nbr of acquisition HIGH */
- outw(APCI3120_ADD_ON_MWTC_HIGH, devpriv->i_IobaseAddon + 0);
- outw(high_word, devpriv->i_IobaseAddon + 2);
-
-/*
- * To configure A2P FIFO
- * ENABLE A2P FIFO WRITE AND ENABLE AMWEN
- * AMWEN_ENABLE | A2P_FIFO_WRITE_ENABLE (0x01|0x02)=0x03
+ * Configure Timer 2
+ *
+ * data[0] = TIMER configure as timer
+ * = WATCHDOG configure as watchdog
+ * data[1] = Timer constant
+ * data[2] = Timer2 interrupt (1)enable or(0) disable
*/
- outw(3, devpriv->i_IobaseAddon + 4);
- /* initialise end of dma interrupt AINT_WRITE_COMPL = ENABLE_WRITE_TC_INT(ADDI) */
- outl((APCI3120_FIFO_ADVANCE_ON_BYTE_2 |
- APCI3120_ENABLE_WRITE_TC_INT),
- devpriv->i_IobaseAmcc + AMCC_OP_REG_INTCSR);
-
- }
- if (samplesinbuf) {
- v_APCI3120_InterruptDmaMoveBlock16bit(dev, s,
- devpriv->ul_DmaBufferVirtual[devpriv->
- ui_DmaActualBuffer], samplesinbuf);
-
- if (!(devpriv->ui_AiFlags & TRIG_WAKE_EOS)) {
- s->async->events |= COMEDI_CB_EOS;
- comedi_event(dev, s);
- }
- }
- if (!devpriv->b_AiContinuous)
- if (devpriv->ui_AiActualScan >= devpriv->ui_AiNbrofScans) {
- /* all data sampled */
- i_APCI3120_StopCyclicAcquisition(dev, s);
- devpriv->b_AiCyclicAcquisition = APCI3120_DISABLE;
- s->async->events |= COMEDI_CB_EOA;
- comedi_event(dev, s);
- return;
- }
-
- if (devpriv->b_DmaDoubleBuffer) { /* switch dma buffers */
- devpriv->ui_DmaActualBuffer = 1 - devpriv->ui_DmaActualBuffer;
- } else {
-/*
- * restart DMA if is not used double buffering
- * ADDED REINITIALISE THE DMA
- */
- ui_Tmp = AGCSTS_TC_ENABLE | AGCSTS_RESET_A2P_FIFO;
- outl(ui_Tmp, devpriv->i_IobaseAddon + AMCC_OP_REG_AGCSTS);
-
- /* changed since 16 bit interface for add on */
- outw(APCI3120_ADD_ON_AGCSTS_LOW, devpriv->i_IobaseAddon + 0);
- outw(APCI3120_ENABLE_TRANSFER_ADD_ON_LOW,
- devpriv->i_IobaseAddon + 2);
- outw(APCI3120_ADD_ON_AGCSTS_HIGH, devpriv->i_IobaseAddon + 0);
- outw(APCI3120_ENABLE_TRANSFER_ADD_ON_HIGH, devpriv->i_IobaseAddon + 2); /* */
-/*
- * A2P FIFO MANAGEMENT
- * A2P fifo reset & transfer control enable
- */
- outl(APCI3120_A2P_FIFO_MANAGEMENT,
- devpriv->i_IobaseAmcc + AMCC_OP_REG_MCSR);
-
- var = devpriv->ul_DmaBufferHw[0];
- low_word = var & 0xffff;
- var = devpriv->ul_DmaBufferHw[0];
- high_word = var / 65536;
- outw(APCI3120_ADD_ON_MWAR_LOW, devpriv->i_IobaseAddon + 0);
- outw(low_word, devpriv->i_IobaseAddon + 2);
- outw(APCI3120_ADD_ON_MWAR_HIGH, devpriv->i_IobaseAddon + 0);
- outw(high_word, devpriv->i_IobaseAddon + 2);
-
- var = devpriv->ui_DmaBufferUsesize[0];
- low_word = var & 0xffff; /* changed */
- var = devpriv->ui_DmaBufferUsesize[0];
- high_word = var / 65536;
- outw(APCI3120_ADD_ON_MWTC_LOW, devpriv->i_IobaseAddon + 0);
- outw(low_word, devpriv->i_IobaseAddon + 2);
- outw(APCI3120_ADD_ON_MWTC_HIGH, devpriv->i_IobaseAddon + 0);
- outw(high_word, devpriv->i_IobaseAddon + 2);
-
-/*
- * To configure A2P FIFO
- * ENABLE A2P FIFO WRITE AND ENABLE AMWEN
- * AMWEN_ENABLE | A2P_FIFO_WRITE_ENABLE (0x01|0x02)=0x03
- */
- outw(3, devpriv->i_IobaseAddon + 4);
- /* initialise end of dma interrupt AINT_WRITE_COMPL = ENABLE_WRITE_TC_INT(ADDI) */
- outl((APCI3120_FIFO_ADVANCE_ON_BYTE_2 |
- APCI3120_ENABLE_WRITE_TC_INT),
- devpriv->i_IobaseAmcc + AMCC_OP_REG_INTCSR);
- }
-}
-
-/*
-+----------------------------------------------------------------------------+
-| Function name :void v_APCI3120_InterruptDmaMoveBlock16bit(comedi_device|
-|*dev,struct comedi_subdevice *s,short *dma,short *data,int n) |
-| |
-+----------------------------------------------------------------------------+
-| Task : This function copies the data from DMA buffer to the |
-| Comedi buffer |
-| |
-+----------------------------------------------------------------------------+
-| Input Parameters : struct comedi_device *dev |
-| struct comedi_subdevice *s |
-| short *dma |
-| short *data,int n |
-+----------------------------------------------------------------------------+
-| Return Value : void |
-| |
-+----------------------------------------------------------------------------+
-*/
-
-void v_APCI3120_InterruptDmaMoveBlock16bit(struct comedi_device *dev,
- struct comedi_subdevice *s, short *dma_buffer, unsigned int num_samples)
+static int i_APCI3120_InsnConfigTimer(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
{
- devpriv->ui_AiActualScan +=
- (s->async->cur_chan + num_samples) / devpriv->ui_AiScanLength;
- s->async->cur_chan += num_samples;
- s->async->cur_chan %= devpriv->ui_AiScanLength;
-
- cfc_write_array_to_buffer(s, dma_buffer, num_samples * sizeof(short));
-}
-
-/*
-+----------------------------------------------------------------------------+
-| TIMER SUBDEVICE |
-+----------------------------------------------------------------------------+
-*/
-
-/*
-+----------------------------------------------------------------------------+
-| Function name :int i_APCI3120_InsnConfigTimer(struct comedi_device *dev, |
-| struct comedi_subdevice *s,struct comedi_insn *insn,unsigned int *data) |
-| |
-+----------------------------------------------------------------------------+
-| Task :Configure Timer 2 |
-| |
-+----------------------------------------------------------------------------+
-| Input Parameters : struct comedi_device *dev |
-| struct comedi_subdevice *s |
-| struct comedi_insn *insn |
-| unsigned int *data |
-| |
-| data[0]= TIMER configure as timer |
-| = WATCHDOG configure as watchdog |
-| data[1] = Timer constant |
-| data[2] = Timer2 interrupt (1)enable or(0) disable |
-| |
-+----------------------------------------------------------------------------+
-| Return Value : |
-| |
-+----------------------------------------------------------------------------+
-*/
-
-int i_APCI3120_InsnConfigTimer(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data)
-{
-
+ const struct addi_board *this_board = comedi_board(dev);
+ struct addi_private *devpriv = dev->private;
unsigned int ui_Timervalue2;
unsigned short us_TmpValue;
unsigned char b_Tmp;
@@ -2007,37 +1929,24 @@
}
/*
-+----------------------------------------------------------------------------+
-| Function name :int i_APCI3120_InsnWriteTimer(struct comedi_device *dev, |
-| struct comedi_subdevice *s, struct comedi_insn *insn,unsigned int *data) |
-| |
-+----------------------------------------------------------------------------+
-| Task : To start and stop the timer |
-+----------------------------------------------------------------------------+
-| Input Parameters : struct comedi_device *dev |
-| struct comedi_subdevice *s |
-| struct comedi_insn *insn |
-| unsigned int *data |
-| |
-| data[0] = 1 (start) |
-| data[0] = 0 (stop ) |
-| data[0] = 2 (write new value) |
-| data[1]= new value |
-| |
-| devpriv->b_Timer2Mode = 0 DISABLE |
-| 1 Timer |
-| 2 Watch dog |
-| |
-+----------------------------------------------------------------------------+
-| Return Value : |
-| |
-+----------------------------------------------------------------------------+
-*/
-
-int i_APCI3120_InsnWriteTimer(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data)
+ * To start and stop the timer
+ *
+ * data[0] = 1 (start)
+ * = 0 (stop)
+ * = 2 (write new value)
+ * data[1] = new value
+ *
+ * devpriv->b_Timer2Mode = 0 DISABLE
+ * = 1 Timer
+ * = 2 Watch dog
+ */
+static int i_APCI3120_InsnWriteTimer(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
{
-
+ const struct addi_board *this_board = comedi_board(dev);
+ struct addi_private *devpriv = dev->private;
unsigned int ui_Timervalue2 = 0;
unsigned short us_TmpValue;
unsigned char b_Tmp;
@@ -2196,31 +2105,19 @@
}
/*
-+----------------------------------------------------------------------------+
-| Function name : int i_APCI3120_InsnReadTimer(struct comedi_device *dev, |
-| struct comedi_subdevice *s,struct comedi_insn *insn, unsigned int *data) |
-| |
-| |
-+----------------------------------------------------------------------------+
-| Task : read the Timer value |
-+----------------------------------------------------------------------------+
-| Input Parameters : struct comedi_device *dev |
-| struct comedi_subdevice *s |
-| struct comedi_insn *insn |
-| unsigned int *data |
-| |
-+----------------------------------------------------------------------------+
-| Return Value : |
-| for Timer: data[0]= Timer constant |
-| |
-| for watchdog: data[0]=0 (still running) |
-| data[0]=1 (run down) |
-| |
-+----------------------------------------------------------------------------+
-*/
-int i_APCI3120_InsnReadTimer(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data)
+ * Read the Timer value
+ *
+ * for Timer: data[0]= Timer constant
+ *
+ * for watchdog: data[0] = 0 (still running)
+ * = 1 (run down)
+ */
+static int i_APCI3120_InsnReadTimer(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
{
+ struct addi_private *devpriv = dev->private;
unsigned char b_Tmp;
unsigned short us_TmpValue, us_TmpValue_2, us_StatusValue;
@@ -2265,299 +2162,52 @@
return insn->n;
}
-/*
-+----------------------------------------------------------------------------+
-| DIGITAL INPUT SUBDEVICE |
-+----------------------------------------------------------------------------+
-*/
-
-/*
-+----------------------------------------------------------------------------+
-| Function name :int i_APCI3120_InsnReadDigitalInput(struct comedi_device *dev, |
-| struct comedi_subdevice *s, struct comedi_insn *insn,unsigned int *data) |
-| |
-| |
-+----------------------------------------------------------------------------+
-| Task : Reads the value of the specified Digital input channel|
-| |
-+----------------------------------------------------------------------------+
-| Input Parameters : struct comedi_device *dev |
-| struct comedi_subdevice *s |
-| struct comedi_insn *insn |
-| unsigned int *data |
-+----------------------------------------------------------------------------+
-| Return Value : |
-| |
-+----------------------------------------------------------------------------+
-*/
-
-int i_APCI3120_InsnReadDigitalInput(struct comedi_device *dev,
- struct comedi_subdevice *s,
- struct comedi_insn *insn,
- unsigned int *data)
+static int apci3120_di_insn_bits(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
{
- unsigned int ui_Chan, ui_TmpValue;
+ struct addi_private *devpriv = dev->private;
+ unsigned int val;
- ui_Chan = CR_CHAN(insn->chanspec); /* channel specified */
-
- /* this_board->di_read(dev,ui_Chan,data); */
- if (ui_Chan <= 3) {
- ui_TmpValue = (unsigned int) inw(devpriv->iobase + APCI3120_RD_STATUS);
-
-/*
- * since only 1 channel reqd to bring it to last bit it is rotated 8
- * +(chan - 1) times then ANDed with 1 for last bit.
- */
- *data = (ui_TmpValue >> (ui_Chan + 8)) & 1;
- /* return 0; */
- } else {
- /* comedi_error(dev," chan spec wrong"); */
- return -EINVAL; /* "sorry channel spec wrong " */
- }
- return insn->n;
-
-}
-
-/*
-+----------------------------------------------------------------------------+
-| Function name :int i_APCI3120_InsnBitsDigitalInput(struct comedi_device *dev, |
-|struct comedi_subdevice *s, struct comedi_insn *insn,unsigned int *data) |
-| |
-+----------------------------------------------------------------------------+
-| Task : Reads the value of the Digital input Port i.e.4channels|
-| value is returned in data[0] |
-| |
-+----------------------------------------------------------------------------+
-| Input Parameters : struct comedi_device *dev |
-| struct comedi_subdevice *s |
-| struct comedi_insn *insn |
-| unsigned int *data |
-+----------------------------------------------------------------------------+
-| Return Value : |
-| |
-+----------------------------------------------------------------------------+
-*/
-int i_APCI3120_InsnBitsDigitalInput(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data)
-{
- unsigned int ui_TmpValue;
- ui_TmpValue = (unsigned int) inw(devpriv->iobase + APCI3120_RD_STATUS);
- /***** state of 4 channels in the 11, 10, 9, 8 bits of status reg
- rotated right 8 times to bring them to last four bits
- ANDed with oxf for value.
- *****/
-
- *data = (ui_TmpValue >> 8) & 0xf;
- /* this_board->di_bits(dev,data); */
- return insn->n;
-}
-
-/*
-+----------------------------------------------------------------------------+
-| DIGITAL OUTPUT SUBDEVICE |
-+----------------------------------------------------------------------------+
-*/
-/*
-+----------------------------------------------------------------------------+
-| Function name :int i_APCI3120_InsnConfigDigitalOutput(struct comedi_device |
-| *dev,struct comedi_subdevice *s,struct comedi_insn *insn,unsigned int *data) |
-| |
-+----------------------------------------------------------------------------+
-| Task :Configure the output memory ON or OFF |
-| |
-+----------------------------------------------------------------------------+
-| Input Parameters :struct comedi_device *dev |
-| struct comedi_subdevice *s |
-| struct comedi_insn *insn |
-| unsigned int *data |
-+----------------------------------------------------------------------------+
-| Return Value : |
-| |
-+----------------------------------------------------------------------------+
-*/
-
-int i_APCI3120_InsnConfigDigitalOutput(struct comedi_device *dev,
- struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
-{
-
- if ((data[0] != 0) && (data[0] != 1)) {
- comedi_error(dev,
- "Not a valid Data !!! ,Data should be 1 or 0\n");
- return -EINVAL;
- }
- if (data[0]) {
- devpriv->b_OutputMemoryStatus = APCI3120_ENABLE;
-
- } else {
- devpriv->b_OutputMemoryStatus = APCI3120_DISABLE;
- devpriv->b_DigitalOutputRegister = 0;
- }
- if (!devpriv->b_OutputMemoryStatus)
- ui_Temp = 0;
- /* if(!devpriv->b_OutputMemoryStatus ) */
+ /* the input channels are bits 11:8 of the status reg */
+ val = inw(devpriv->iobase + APCI3120_RD_STATUS);
+ data[1] = (val >> 8) & 0xf;
return insn->n;
}
-/*
-+----------------------------------------------------------------------------+
-| Function name :int i_APCI3120_InsnBitsDigitalOutput(struct comedi_device *dev, |
-| struct comedi_subdevice *s, struct comedi_insn *insn,unsigned int *data) |
-| |
-+----------------------------------------------------------------------------+
-| Task : write diatal output port |
-| |
-+----------------------------------------------------------------------------+
-| Input Parameters : struct comedi_device *dev |
-| struct comedi_subdevice *s |
-| struct comedi_insn *insn |
-| unsigned int *data |
-| data[0] Value to be written
-| data[1] :1 Set digital o/p ON
-| data[1] 2 Set digital o/p OFF with memory ON
-+----------------------------------------------------------------------------+
-| Return Value : |
-| |
-+----------------------------------------------------------------------------+
-*/
-
-int i_APCI3120_InsnBitsDigitalOutput(struct comedi_device *dev,
- struct comedi_subdevice *s,
- struct comedi_insn *insn,
- unsigned int *data)
+static int apci3120_do_insn_bits(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
{
- if ((data[0] > devpriv->s_EeParameters.i_DoMaxdata) || (data[0] < 0)) {
+ struct addi_private *devpriv = dev->private;
+ unsigned int mask = data[0];
+ unsigned int bits = data[1];
+ unsigned int val;
- comedi_error(dev, "Data is not valid !!! \n");
- return -EINVAL;
+ /* The do channels are bits 7:4 of the do register */
+ val = devpriv->b_DigitalOutputRegister >> 4;
+ if (mask) {
+ val &= ~mask;
+ val |= (bits & mask);
+ devpriv->b_DigitalOutputRegister = val << 4;
+
+ outb(val << 4, devpriv->iobase + APCI3120_DIGITAL_OUTPUT);
}
- switch (data[1]) {
- case 1:
- data[0] = (data[0] << 4) | devpriv->b_DigitalOutputRegister;
- break;
-
- case 2:
- data[0] = data[0];
- break;
- default:
- printk("\nThe parameter passed is in error \n");
- return -EINVAL;
- } /* switch(data[1]) */
- outb(data[0], devpriv->iobase + APCI3120_DIGITAL_OUTPUT);
-
- devpriv->b_DigitalOutputRegister = data[0] & 0xF0;
+ data[1] = val;
return insn->n;
-
}
-/*
-+----------------------------------------------------------------------------+
-| Function name :int i_APCI3120_InsnWriteDigitalOutput(struct comedi_device *dev,|
-|struct comedi_subdevice *s,struct comedi_insn *insn,unsigned int *data) |
-| |
-+----------------------------------------------------------------------------+
-| Task : Write digiatl output |
-| |
-+----------------------------------------------------------------------------+
-| Input Parameters : struct comedi_device *dev |
-| struct comedi_subdevice *s |
-| struct comedi_insn *insn |
-| unsigned int *data |
- data[0] Value to be written
- data[1] :1 Set digital o/p ON
- data[1] 2 Set digital o/p OFF with memory ON
-+----------------------------------------------------------------------------+
-| Return Value : |
-| |
-+----------------------------------------------------------------------------+
-*/
-
-int i_APCI3120_InsnWriteDigitalOutput(struct comedi_device *dev,
- struct comedi_subdevice *s,
- struct comedi_insn *insn,
- unsigned int *data)
+static int i_APCI3120_InsnWriteAnalogOutput(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
{
-
- unsigned int ui_Temp1;
-
- unsigned int ui_NoOfChannel = CR_CHAN(insn->chanspec); /* get the channel */
-
- if ((data[0] != 0) && (data[0] != 1)) {
- comedi_error(dev,
- "Not a valid Data !!! ,Data should be 1 or 0\n");
- return -EINVAL;
- }
- if (ui_NoOfChannel > devpriv->s_EeParameters.i_NbrDoChannel - 1) {
- comedi_error(dev,
- "This board doesn't have specified channel !!! \n");
- return -EINVAL;
- }
-
- switch (data[1]) {
- case 1:
- data[0] = (data[0] << ui_NoOfChannel);
-/* ES05 data[0]=(data[0]<<4)|ui_Temp; */
- data[0] = (data[0] << 4) | devpriv->b_DigitalOutputRegister;
- break;
-
- case 2:
- data[0] = ~data[0] & 0x1;
- ui_Temp1 = 1;
- ui_Temp1 = ui_Temp1 << ui_NoOfChannel;
- ui_Temp1 = ui_Temp1 << 4;
-/* ES05 ui_Temp=ui_Temp|ui_Temp1; */
- devpriv->b_DigitalOutputRegister =
- devpriv->b_DigitalOutputRegister | ui_Temp1;
-
- data[0] = (data[0] << ui_NoOfChannel) ^ 0xf;
- data[0] = data[0] << 4;
-/* ES05 data[0]=data[0]& ui_Temp; */
- data[0] = data[0] & devpriv->b_DigitalOutputRegister;
- break;
- default:
- printk("\nThe parameter passed is in error \n");
- return -EINVAL;
- } /* switch(data[1]) */
- outb(data[0], devpriv->iobase + APCI3120_DIGITAL_OUTPUT);
-
-/* ES05 ui_Temp=data[0] & 0xf0; */
- devpriv->b_DigitalOutputRegister = data[0] & 0xf0;
- return insn->n;
-
-}
-
-/*
-+----------------------------------------------------------------------------+
-| ANALOG OUTPUT SUBDEVICE |
-+----------------------------------------------------------------------------+
-*/
-
-/*
-+----------------------------------------------------------------------------+
-| Function name :int i_APCI3120_InsnWriteAnalogOutput(struct comedi_device *dev,|
-|struct comedi_subdevice *s, struct comedi_insn *insn,unsigned int *data) |
-| |
-+----------------------------------------------------------------------------+
-| Task : Write analog output |
-| |
-+----------------------------------------------------------------------------+
-| Input Parameters : struct comedi_device *dev |
-| struct comedi_subdevice *s |
-| struct comedi_insn *insn |
-| unsigned int *data |
-+----------------------------------------------------------------------------+
-| Return Value : |
-| |
-+----------------------------------------------------------------------------+
-*/
-
-int i_APCI3120_InsnWriteAnalogOutput(struct comedi_device *dev,
- struct comedi_subdevice *s,
- struct comedi_insn *insn,
- unsigned int *data)
-{
+ struct addi_private *devpriv = dev->private;
unsigned int ui_Range, ui_Channel;
unsigned short us_TmpValue;
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.h b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.h
deleted file mode 100644
index 50eb0a0..0000000
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.h
+++ /dev/null
@@ -1,249 +0,0 @@
-
-/* hwdrv_apci3120.h */
-
-/*
- * Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module.
- *
- * ADDI-DATA GmbH
- * Dieselstrasse 3
- * D-77833 Ottersweier
- * Tel: +19(0)7223/9493-0
- * Fax: +49(0)7223/9493-92
- * http://www.addi-data.com
- * info@addi-data.com
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 of the License, or (at your option)
- * any later version.
- */
-
-/* comedi related defines */
-
-/* ANALOG INPUT RANGE */
-static const struct comedi_lrange range_apci3120_ai = { 8, {
- BIP_RANGE(10),
- BIP_RANGE(5),
- BIP_RANGE(2),
- BIP_RANGE(1),
- UNI_RANGE(10),
- UNI_RANGE(5),
- UNI_RANGE(2),
- UNI_RANGE(1)
- }
-};
-
-/* ANALOG OUTPUT RANGE */
-static const struct comedi_lrange range_apci3120_ao = { 2, {
- BIP_RANGE(10),
- UNI_RANGE(10)
- }
-};
-
-#define APCI3120_BIPOLAR_RANGES 4 /* used for test on mixture of BIP/UNI ranges */
-
-#define APCI3120_BOARD_VENDOR_ID 0x10E8
-#define APCI3120_ADDRESS_RANGE 16
-
-#define APCI3120_DISABLE 0
-#define APCI3120_ENABLE 1
-
-#define APCI3120_START 1
-#define APCI3120_STOP 0
-
-#define APCI3120_EOC_MODE 1
-#define APCI3120_EOS_MODE 2
-#define APCI3120_DMA_MODE 3
-
-/* DIGITAL INPUT-OUTPUT DEFINE */
-
-#define APCI3120_DIGITAL_OUTPUT 0x0D
-#define APCI3120_RD_STATUS 0x02
-#define APCI3120_RD_FIFO 0x00
-
-/* digital output insn_write ON /OFF selection */
-#define APCI3120_SET4DIGITALOUTPUTON 1
-#define APCI3120_SET4DIGITALOUTPUTOFF 0
-
-/* analog output SELECT BIT */
-#define APCI3120_ANALOG_OP_CHANNEL_1 0x0000
-#define APCI3120_ANALOG_OP_CHANNEL_2 0x4000
-#define APCI3120_ANALOG_OP_CHANNEL_3 0x8000
-#define APCI3120_ANALOG_OP_CHANNEL_4 0xC000
-#define APCI3120_ANALOG_OP_CHANNEL_5 0x0000
-#define APCI3120_ANALOG_OP_CHANNEL_6 0x4000
-#define APCI3120_ANALOG_OP_CHANNEL_7 0x8000
-#define APCI3120_ANALOG_OP_CHANNEL_8 0xC000
-
-/* Enable external trigger bit in nWrAddress */
-#define APCI3120_ENABLE_EXT_TRIGGER 0x8000
-
-/* ANALOG OUTPUT AND INPUT DEFINE */
-#define APCI3120_UNIPOLAR 0x80 /* $$ RAM sequence polarity BIT */
-#define APCI3120_BIPOLAR 0x00 /* $$ RAM sequence polarity BIT */
-#define APCI3120_ANALOG_OUTPUT_1 0x08 /* (ADDRESS ) */
-#define APCI3120_ANALOG_OUTPUT_2 0x0A /* (ADDRESS ) */
-#define APCI3120_1_GAIN 0x00 /* $$ RAM sequence Gain Bits for gain 1 */
-#define APCI3120_2_GAIN 0x10 /* $$ RAM sequence Gain Bits for gain 2 */
-#define APCI3120_5_GAIN 0x20 /* $$ RAM sequence Gain Bits for gain 5 */
-#define APCI3120_10_GAIN 0x30 /* $$ RAM sequence Gain Bits for gain 10 */
-#define APCI3120_SEQ_RAM_ADDRESS 0x06 /* $$ EARLIER NAMED APCI3120_FIFO_ADDRESS */
-#define APCI3120_RESET_FIFO 0x0C /* (ADDRESS) */
-#define APCI3120_TIMER_0_MODE_2 0x01 /* $$ Bits for timer mode */
-#define APCI3120_TIMER_0_MODE_4 0x2
-#define APCI3120_SELECT_TIMER_0_WORD 0x00
-#define APCI3120_ENABLE_TIMER0 0x1000 /* $$Gatebit 0 in nWrAddress */
-#define APCI3120_CLEAR_PR 0xF0FF
-#define APCI3120_CLEAR_PA 0xFFF0
-#define APCI3120_CLEAR_PA_PR (APCI3120_CLEAR_PR & APCI3120_CLEAR_PA)
-
-/* nWrMode_Select */
-#define APCI3120_ENABLE_SCAN 0x8 /* $$ bit in nWrMode_Select */
-#define APCI3120_DISABLE_SCAN (~APCI3120_ENABLE_SCAN)
-#define APCI3120_ENABLE_EOS_INT 0x2 /* $$ bit in nWrMode_Select */
-
-#define APCI3120_DISABLE_EOS_INT (~APCI3120_ENABLE_EOS_INT)
-#define APCI3120_ENABLE_EOC_INT 0x1
-#define APCI3120_DISABLE_EOC_INT (~APCI3120_ENABLE_EOC_INT)
-#define APCI3120_DISABLE_ALL_INTERRUPT_WITHOUT_TIMER (APCI3120_DISABLE_EOS_INT & APCI3120_DISABLE_EOC_INT)
-#define APCI3120_DISABLE_ALL_INTERRUPT (APCI3120_DISABLE_TIMER_INT & APCI3120_DISABLE_EOS_INT & APCI3120_DISABLE_EOC_INT)
-
-/* status register bits */
-#define APCI3120_EOC 0x8000
-#define APCI3120_EOS 0x2000
-
-/* software trigger dummy register */
-#define APCI3120_START_CONVERSION 0x02 /* (ADDRESS) */
-
-/* TIMER DEFINE */
-#define APCI3120_QUARTZ_A 70
-#define APCI3120_QUARTZ_B 50
-#define APCI3120_TIMER 1
-#define APCI3120_WATCHDOG 2
-#define APCI3120_TIMER_DISABLE 0
-#define APCI3120_TIMER_ENABLE 1
-#define APCI3120_ENABLE_TIMER2 0x4000 /* $$ gatebit 2 in nWrAddress */
-#define APCI3120_DISABLE_TIMER2 (~APCI3120_ENABLE_TIMER2)
-#define APCI3120_ENABLE_TIMER_INT 0x04 /* $$ ENAIRQ_FC_Bit in nWrModeSelect */
-#define APCI3120_DISABLE_TIMER_INT (~APCI3120_ENABLE_TIMER_INT)
-#define APCI3120_WRITE_MODE_SELECT 0x0E /* (ADDRESS) */
-#define APCI3120_SELECT_TIMER_0_WORD 0x00
-#define APCI3120_SELECT_TIMER_1_WORD 0x01
-#define APCI3120_TIMER_1_MODE_2 0x4
-
-/* $$ BIT FOR MODE IN nCsTimerCtr1 */
-#define APCI3120_TIMER_2_MODE_0 0x0
-#define APCI3120_TIMER_2_MODE_2 0x10
-#define APCI3120_TIMER_2_MODE_5 0x30
-
-/* $$ BIT FOR MODE IN nCsTimerCtr0 */
-#define APCI3120_SELECT_TIMER_2_LOW_WORD 0x02
-#define APCI3120_SELECT_TIMER_2_HIGH_WORD 0x03
-
-#define APCI3120_TIMER_CRT0 0x0D /* (ADDRESS for cCsTimerCtr0) */
-#define APCI3120_TIMER_CRT1 0x0C /* (ADDRESS for cCsTimerCtr1) */
-
-#define APCI3120_TIMER_VALUE 0x04 /* ADDRESS for nCsTimerWert */
-#define APCI3120_TIMER_STATUS_REGISTER 0x0D /* ADDRESS for delete timer 2 interrupt */
-#define APCI3120_RD_STATUS 0x02 /* ADDRESS */
-#define APCI3120_WR_ADDRESS 0x00 /* ADDRESS */
-#define APCI3120_ENABLE_WATCHDOG 0x20 /* $$BIT in nWrMode_Select */
-#define APCI3120_DISABLE_WATCHDOG (~APCI3120_ENABLE_WATCHDOG)
-#define APCI3120_ENABLE_TIMER_COUNTER 0x10 /* $$BIT in nWrMode_Select */
-#define APCI3120_DISABLE_TIMER_COUNTER (~APCI3120_ENABLE_TIMER_COUNTER)
-#define APCI3120_FC_TIMER 0x1000 /* bit in status register */
-#define APCI3120_ENABLE_TIMER0 0x1000
-#define APCI3120_ENABLE_TIMER1 0x2000
-#define APCI3120_ENABLE_TIMER2 0x4000
-#define APCI3120_DISABLE_TIMER0 (~APCI3120_ENABLE_TIMER0)
-#define APCI3120_DISABLE_TIMER1 (~APCI3120_ENABLE_TIMER1)
-#define APCI3120_DISABLE_TIMER2 (~APCI3120_ENABLE_TIMER2)
-
-#define APCI3120_TIMER2_SELECT_EOS 0xC0 /* ADDED on 20-6 */
-#define APCI3120_COUNTER 3 /* on 20-6 */
-#define APCI3120_DISABLE_ALL_TIMER (APCI3120_DISABLE_TIMER0 & APCI3120_DISABLE_TIMER1 & APCI3120_DISABLE_TIMER2) /* on 20-6 */
-
-#define MAX_ANALOGINPUT_CHANNELS 32
-
-struct str_AnalogReadInformation {
-
- unsigned char b_Type; /* EOC or EOS */
- unsigned char b_InterruptFlag; /* Interrupt use or not */
- unsigned int ui_ConvertTiming; /* Selection of the conversion time */
- unsigned char b_NbrOfChannel; /* Number of channel to read */
- unsigned int ui_ChannelList[MAX_ANALOGINPUT_CHANNELS]; /* Number of the channel to be read */
- unsigned int ui_RangeList[MAX_ANALOGINPUT_CHANNELS]; /* Gain of each channel */
-
-};
-
-
-/* Function Declaration For APCI-3120 */
-
-/* Internal functions */
-int i_APCI3120_SetupChannelList(struct comedi_device *dev, struct comedi_subdevice *s,
- int n_chan, unsigned int *chanlist, char check);
-int i_APCI3120_ExttrigEnable(struct comedi_device *dev);
-int i_APCI3120_ExttrigDisable(struct comedi_device *dev);
-int i_APCI3120_StopCyclicAcquisition(struct comedi_device *dev, struct comedi_subdevice *s);
-int i_APCI3120_Reset(struct comedi_device *dev);
-int i_APCI3120_CyclicAnalogInput(int mode, struct comedi_device *dev,
- struct comedi_subdevice *s);
-/* Interrupt functions */
-void v_APCI3120_Interrupt(int irq, void *d);
-/* UPDATE-0.7.57->0.7.68 void v_APCI3120_InterruptDmaMoveBlock16bit(struct comedi_device *dev,struct comedi_subdevice *s,short *dma,short *data,int n); */
-void v_APCI3120_InterruptDmaMoveBlock16bit(struct comedi_device *dev,
- struct comedi_subdevice *s,
- short *dma_buffer,
- unsigned int num_samples);
-int i_APCI3120_InterruptHandleEos(struct comedi_device *dev);
-void v_APCI3120_InterruptDma(int irq, void *d);
-
-/* TIMER */
-
-int i_APCI3120_InsnConfigTimer(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-int i_APCI3120_InsnWriteTimer(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-int i_APCI3120_InsnReadTimer(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-
-/*
-* DI for di read
-*/
-
-int i_APCI3120_InsnBitsDigitalInput(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-int i_APCI3120_InsnReadDigitalInput(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-
-/* DO */
-/* int i_APCI3120_WriteDigitalOutput(struct comedi_device *dev,
- * unsigned char data);
- */
-int i_APCI3120_InsnConfigDigitalOutput(struct comedi_device *dev,
- struct comedi_subdevice *s, struct comedi_insn *insn,
- unsigned int *data);
-int i_APCI3120_InsnBitsDigitalOutput(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-int i_APCI3120_InsnWriteDigitalOutput(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-
-/* AO */
-/* int i_APCI3120_Write1AnalogValue(struct comedi_device *dev,UINT ui_Range,
- * UINT ui_Channel,UINT data );
- */
-
-int i_APCI3120_InsnWriteAnalogOutput(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-
-/* AI HArdware layer */
-
-int i_APCI3120_InsnConfigAnalogInput(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-int i_APCI3120_InsnReadAnalogInput(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-int i_APCI3120_CommandTestAnalogInput(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_cmd *cmd);
-int i_APCI3120_CommandAnalogInput(struct comedi_device *dev, struct comedi_subdevice *s);
-/* int i_APCI3120_CancelAnalogInput(struct comedi_device *dev, struct comedi_subdevice *s); */
-int i_APCI3120_StopCyclicAcquisition(struct comedi_device *dev, struct comedi_subdevice *s);
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3200.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3200.c
index 38ab499..829af18 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3200.c
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3200.c
@@ -51,15 +51,131 @@
+----------+-----------+------------------------------------------------+
*/
-/*
- +----------------------------------------------------------------------------+
- | Included files |
- +----------------------------------------------------------------------------+
-*/
-#include "hwdrv_apci3200.h"
-
/* #define PRINT_INFO */
+/* Card Specific information */
+/* #define APCI3200_ADDRESS_RANGE 264 */
+
+/* Analog Input related Defines */
+#define APCI3200_AI_OFFSET_GAIN 0
+#define APCI3200_AI_SC_TEST 4
+#define APCI3200_AI_IRQ 8
+#define APCI3200_AI_AUTOCAL 12
+#define APCI3200_RELOAD_CONV_TIME_VAL 32
+#define APCI3200_CONV_TIME_TIME_BASE 36
+#define APCI3200_RELOAD_DELAY_TIME_VAL 40
+#define APCI3200_DELAY_TIME_TIME_BASE 44
+#define APCI3200_AI_MODULE1 0
+#define APCI3200_AI_MODULE2 64
+#define APCI3200_AI_MODULE3 128
+#define APCI3200_AI_MODULE4 192
+#define TRUE 1
+#define FALSE 0
+#define APCI3200_AI_EOSIRQ 16
+#define APCI3200_AI_EOS 20
+#define APCI3200_AI_CHAN_ID 24
+#define APCI3200_AI_CHAN_VAL 28
+#define ANALOG_INPUT 0
+#define TEMPERATURE 1
+#define RESISTANCE 2
+
+#define ENABLE_EXT_TRIG 1
+#define ENABLE_EXT_GATE 2
+#define ENABLE_EXT_TRIG_GATE 3
+
+#define APCI3200_MAXVOLT 2.5
+#define ADDIDATA_GREATER_THAN_TEST 0
+#define ADDIDATA_LESS_THAN_TEST 1
+
+#define ADDIDATA_UNIPOLAR 1
+#define ADDIDATA_BIPOLAR 2
+
+#define MAX_MODULE 4
+
+/* ANALOG INPUT RANGE */
+static const struct comedi_lrange range_apci3200_ai = {
+ 8, {
+ BIP_RANGE(10),
+ BIP_RANGE(5),
+ BIP_RANGE(2),
+ BIP_RANGE(1),
+ UNI_RANGE(10),
+ UNI_RANGE(5),
+ UNI_RANGE(2),
+ UNI_RANGE(1)
+ }
+};
+
+static const struct comedi_lrange range_apci3300_ai = {
+ 4, {
+ UNI_RANGE(10),
+ UNI_RANGE(5),
+ UNI_RANGE(2),
+ UNI_RANGE(1)
+ }
+};
+
+int MODULE_NO;
+struct {
+ int i_Gain;
+ int i_Polarity;
+ int i_OffsetRange;
+ int i_Coupling;
+ int i_SingleDiff;
+ int i_AutoCalibration;
+ unsigned int ui_ReloadValue;
+ unsigned int ui_TimeUnitReloadVal;
+ int i_Interrupt;
+ int i_ModuleSelection;
+} Config_Parameters_Module1, Config_Parameters_Module2,
+ Config_Parameters_Module3, Config_Parameters_Module4;
+
+
+struct str_ADDIDATA_RTDStruct {
+ unsigned int ul_NumberOfValue;
+ unsigned int *pul_ResistanceValue;
+ unsigned int *pul_TemperatureValue;
+};
+
+struct str_Module {
+ unsigned long ul_CurrentSourceCJC;
+ unsigned long ul_CurrentSource[5];
+ unsigned long ul_GainFactor[8]; /* Gain Factor */
+ unsigned int w_GainValue[10];
+};
+
+struct str_BoardInfos {
+
+ int i_CJCAvailable;
+ int i_CJCPolarity;
+ int i_CJCGain;
+ int i_InterruptFlag;
+ int i_ADDIDATAPolarity;
+ int i_ADDIDATAGain;
+ int i_AutoCalibration;
+ int i_ADDIDATAConversionTime;
+ int i_ADDIDATAConversionTimeUnit;
+ int i_ADDIDATAType;
+ int i_ChannelNo;
+ int i_ChannelCount;
+ int i_ScanType;
+ int i_FirstChannel;
+ int i_LastChannel;
+ int i_Sum;
+ int i_Offset;
+ unsigned int ui_Channel_num;
+ int i_Count;
+ int i_Initialised;
+ unsigned int ui_InterruptChannelValue[144]; /* Buffer */
+ unsigned char b_StructInitialized;
+ /* 7 is the maximal number of channels */
+ unsigned int ui_ScanValueArray[7 + 12];
+
+ int i_ConnectionType;
+ int i_NbrOfModule;
+ struct str_Module s_Module[MAX_MODULE];
+};
+
/* BEGIN JK 06.07.04: Management of sevrals boards */
/*
int i_CJCAvailable=1;
@@ -94,27 +210,10 @@
#define NVCMD_BEGIN_READ (0x7 << 5) /* nvRam begin read command */
#define NVCMD_BEGIN_WRITE (0x6 << 5) /* EEPROM begin write command */
-/*+----------------------------------------------------------------------------+*/
-/*| Function Name : int i_AddiHeaderRW_ReadEeprom |*/
-/*| (int i_NbOfWordsToRead, |*/
-/*| unsigned int dw_PCIBoardEepromAddress, |*/
-/*| unsigned short w_EepromStartAddress, |*/
-/*| unsigned short * pw_DataRead) |*/
-/*+----------------------------------------------------------------------------+*/
-/*| Task : Read word from the 5920 eeprom. |*/
-/*+----------------------------------------------------------------------------+*/
-/*| Input Parameters : int i_NbOfWordsToRead : Nbr. of word to read |*/
-/*| unsigned int dw_PCIBoardEepromAddress : Address of the eeprom |*/
-/*| unsigned short w_EepromStartAddress : Eeprom start address |*/
-/*+----------------------------------------------------------------------------+*/
-/*| Output Parameters : unsigned short * pw_DataRead : Read data |*/
-/*+----------------------------------------------------------------------------+*/
-/*| Return Value : - |*/
-/*+----------------------------------------------------------------------------+*/
-
-int i_AddiHeaderRW_ReadEeprom(int i_NbOfWordsToRead,
- unsigned int dw_PCIBoardEepromAddress,
- unsigned short w_EepromStartAddress, unsigned short *pw_DataRead)
+static int i_AddiHeaderRW_ReadEeprom(int i_NbOfWordsToRead,
+ unsigned int dw_PCIBoardEepromAddress,
+ unsigned short w_EepromStartAddress,
+ unsigned short *pw_DataRead)
{
unsigned int dw_eeprom_busy = 0;
int i_Counter = 0;
@@ -241,20 +340,8 @@
return 0;
}
-/*+----------------------------------------------------------------------------+*/
-/*| Function Name : void v_GetAPCI3200EepromCalibrationValue (void) |*/
-/*+----------------------------------------------------------------------------+*/
-/*| Task : Read calibration value from the APCI-3200 eeprom. |*/
-/*+----------------------------------------------------------------------------+*/
-/*| Input Parameters : - |*/
-/*+----------------------------------------------------------------------------+*/
-/*| Output Parameters : - |*/
-/*+----------------------------------------------------------------------------+*/
-/*| Return Value : - |*/
-/*+----------------------------------------------------------------------------+*/
-
-void v_GetAPCI3200EepromCalibrationValue(unsigned int dw_PCIBoardEepromAddress,
- struct str_BoardInfos *BoardInformations)
+static void v_GetAPCI3200EepromCalibrationValue(unsigned int dw_PCIBoardEepromAddress,
+ struct str_BoardInfos *BoardInformations)
{
unsigned short w_AnalogInputMainHeaderAddress;
unsigned short w_AnalogInputComponentAddress;
@@ -448,9 +535,11 @@
}
}
-int i_APCI3200_GetChannelCalibrationValue(struct comedi_device *dev,
- unsigned int ui_Channel_num, unsigned int *CJCCurrentSource,
- unsigned int *ChannelCurrentSource, unsigned int *ChannelGainFactor)
+static int i_APCI3200_GetChannelCalibrationValue(struct comedi_device *dev,
+ unsigned int ui_Channel_num,
+ unsigned int *CJCCurrentSource,
+ unsigned int *ChannelCurrentSource,
+ unsigned int *ChannelGainFactor)
{
int i_DiffChannel = 0;
int i_Module = 0;
@@ -520,359 +609,1038 @@
return 0;
}
-/* End JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
-
-/*
- +----------------------------------------------------------------------------+
- | Function Name : int i_APCI3200_ReadDigitalInput |
- | (struct comedi_device *dev,struct comedi_subdevice *s, |
- | struct comedi_insn *insn,unsigned int *data) |
- +----------------------------------------------------------------------------+
- | Task : Read value of the selected channel or port |
- +----------------------------------------------------------------------------+
- | Input Parameters : struct comedi_device *dev : Driver handle |
- | unsigned int ui_NoOfChannels : No Of Channels To read for Port
- Channel Numberfor single channel
- | unsigned int data[0] : 0: Read single channel
- 1: Read port value
- data[1] Port number
- +----------------------------------------------------------------------------+
- | Output Parameters : -- data[0] :Read status value
- +----------------------------------------------------------------------------+
- | Return Value : TRUE : No error occur |
- | : FALSE : Error occur. Return the error |
- | |
- +----------------------------------------------------------------------------+
-*/
-
-int i_APCI3200_ReadDigitalInput(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data)
+static int apci3200_di_insn_bits(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
{
- unsigned int ui_Temp = 0;
- unsigned int ui_NoOfChannel = 0;
- ui_NoOfChannel = CR_CHAN(insn->chanspec);
- ui_Temp = data[0];
- *data = inl(devpriv->i_IobaseReserved);
+ struct addi_private *devpriv = dev->private;
- if (ui_Temp == 0) {
- *data = (*data >> ui_NoOfChannel) & 0x1;
- } /* if (ui_Temp==0) */
- else {
- if (ui_Temp == 1) {
- if (data[1] < 0 || data[1] > 1) {
- printk("\nThe port number is in error\n");
- return -EINVAL;
- } /* if(data[1] < 0 || data[1] >1) */
- switch (ui_NoOfChannel) {
+ data[1] = inl(devpriv->i_IobaseReserved) & 0xf;
- case 2:
- *data = (*data >> (2 * data[1])) & 0x3;
- break;
- case 3:
- *data = (*data & 15);
- break;
- default:
- comedi_error(dev, " chan spec wrong");
- return -EINVAL; /* "sorry channel spec wrong " */
+ return insn->n;
+}
- } /* switch(ui_NoOfChannels) */
- } /* if (ui_Temp==1) */
- else {
- printk("\nSpecified channel not supported \n");
- } /* elseif (ui_Temp==1) */
+static int apci3200_do_insn_bits(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
+{
+ struct addi_private *devpriv = dev->private;
+ unsigned int mask = data[0];
+ unsigned int bits = data[1];
+
+ s->state = inl(devpriv->i_IobaseAddon) & 0xf;
+ if (mask) {
+ s->state &= ~mask;
+ s->state |= (bits & mask)
+
+ outl(s->state, devpriv->i_IobaseAddon);
}
+
+ data[1] = s->state;
+
return insn->n;
}
-/*
- +----------------------------------------------------------------------------+
- | Function Name : int i_APCI3200_ConfigDigitalOutput |
- | (struct comedi_device *dev,struct comedi_subdevice *s, |
- | struct comedi_insn *insn,unsigned int *data) |
- +----------------------------------------------------------------------------+
- | Task : Configures The Digital Output Subdevice. |
- +----------------------------------------------------------------------------+
- | Input Parameters : struct comedi_device *dev : Driver handle |
- | data[0] :1 Memory enable
- 0 Memory Disable
- +----------------------------------------------------------------------------+
- | Output Parameters : -- |
- +----------------------------------------------------------------------------+
- | Return Value : TRUE : No error occur |
- | : FALSE : Error occur. Return the error |
- | |
- +----------------------------------------------------------------------------+
-*/
-int i_APCI3200_ConfigDigitalOutput(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data)
+static int i_APCI3200_Read1AnalogInputChannel(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
{
+ struct addi_private *devpriv = dev->private;
+ unsigned int ui_EOC = 0;
+ unsigned int ui_ChannelNo = 0;
+ unsigned int ui_CommandRegister = 0;
- if ((data[0] != 0) && (data[0] != 1)) {
- comedi_error(dev,
- "Not a valid Data !!! ,Data should be 1 or 0\n");
+ /* BEGIN JK 06.07.04: Management of sevrals boards */
+ /* ui_ChannelNo=i_ChannelNo; */
+ ui_ChannelNo = s_BoardInfos[dev->minor].i_ChannelNo;
+
+ /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
+ while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
+ 12) >> 19) & 1) != 1) ;
+ /*********************************/
+ /* Write the channel to configure */
+ /*********************************/
+ /* Begin JK 20.10.2004: Bad channel value is used when using differential mode */
+ /* outl(0 | ui_Channel_num , devpriv->iobase+i_Offset + 0x4); */
+ /* outl(0 | s_BoardInfos [dev->minor].ui_Channel_num , devpriv->iobase+s_BoardInfos [dev->minor].i_Offset + 0x4); */
+ outl(0 | s_BoardInfos[dev->minor].i_ChannelNo,
+ devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 0x4);
+ /* End JK 20.10.2004: Bad channel value is used when using differential mode */
+
+ /*******************************/
+ /* Set the convert timing unit */
+ /*******************************/
+ /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
+ while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
+ 12) >> 19) & 1) != 1) ;
+
+ /* outl(i_ADDIDATAConversionTimeUnit , devpriv->iobase+i_Offset + 36); */
+ outl(s_BoardInfos[dev->minor].i_ADDIDATAConversionTimeUnit,
+ devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 36);
+
+ /**************************/
+ /* Set the convert timing */
+ /**************************/
+ /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
+ while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
+ 12) >> 19) & 1) != 1) ;
+
+ /* outl(i_ADDIDATAConversionTime , devpriv->iobase+i_Offset + 32); */
+ outl(s_BoardInfos[dev->minor].i_ADDIDATAConversionTime,
+ devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 32);
+
+ /**************************************************************************/
+ /* Set the start end stop index to the selected channel and set the start */
+ /**************************************************************************/
+
+ ui_CommandRegister = ui_ChannelNo | (ui_ChannelNo << 8) | 0x80000;
+
+ /*********************************/
+ /*Test if the interrupt is enable */
+ /*********************************/
+
+ /* if (i_InterruptFlag == ADDIDATA_ENABLE) */
+ if (s_BoardInfos[dev->minor].i_InterruptFlag == ADDIDATA_ENABLE) {
+ /************************/
+ /* Enable the interrupt */
+ /************************/
+ ui_CommandRegister = ui_CommandRegister | 0x00100000;
+ } /* if (i_InterruptFlag == ADDIDATA_ENABLE) */
+
+ /******************************/
+ /* Write the command register */
+ /******************************/
+ /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
+ while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
+ 12) >> 19) & 1) != 1) ;
+
+ /* outl(ui_CommandRegister, devpriv->iobase+i_Offset + 8); */
+ outl(ui_CommandRegister,
+ devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 8);
+
+ /*****************************/
+ /*Test if interrupt is enable */
+ /*****************************/
+ /* if (i_InterruptFlag == ADDIDATA_DISABLE) */
+ if (s_BoardInfos[dev->minor].i_InterruptFlag == ADDIDATA_DISABLE) {
+ do {
+ /*************************/
+ /*Read the EOC Status bit */
+ /*************************/
+
+ /* ui_EOC = inl(devpriv->iobase+i_Offset + 20) & 1; */
+ ui_EOC = inl(devpriv->iobase +
+ s_BoardInfos[dev->minor].i_Offset + 20) & 1;
+
+ } while (ui_EOC != 1);
+
+ /***************************************/
+ /* Read the digital value of the input */
+ /***************************************/
+
+ /* data[0] = inl (devpriv->iobase+i_Offset + 28); */
+ data[0] =
+ inl(devpriv->iobase +
+ s_BoardInfos[dev->minor].i_Offset + 28);
+ /* END JK 06.07.04: Management of sevrals boards */
+
+ } /* if (i_InterruptFlag == ADDIDATA_DISABLE) */
+ return 0;
+}
+
+static int i_APCI3200_ReadCalibrationOffsetValue(struct comedi_device *dev,
+ unsigned int *data)
+{
+ struct addi_private *devpriv = dev->private;
+ unsigned int ui_Temp = 0, ui_EOC = 0;
+ unsigned int ui_CommandRegister = 0;
+
+ /* BEGIN JK 06.07.04: Management of sevrals boards */
+ /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
+ while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
+ 12) >> 19) & 1) != 1) ;
+ /*********************************/
+ /* Write the channel to configure */
+ /*********************************/
+ /* Begin JK 20.10.2004: This seems not necessary ! */
+ /* outl(0 | ui_Channel_num , devpriv->iobase+i_Offset + 0x4); */
+ /* outl(0 | s_BoardInfos [dev->minor].ui_Channel_num , devpriv->iobase+s_BoardInfos [dev->minor].i_Offset + 0x4); */
+ /* End JK 20.10.2004: This seems not necessary ! */
+
+ /*******************************/
+ /* Set the convert timing unit */
+ /*******************************/
+ /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
+ while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
+ 12) >> 19) & 1) != 1) ;
+ /* outl(i_ADDIDATAConversionTimeUnit , devpriv->iobase+i_Offset + 36); */
+ outl(s_BoardInfos[dev->minor].i_ADDIDATAConversionTimeUnit,
+ devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 36);
+ /**************************/
+ /* Set the convert timing */
+ /**************************/
+ /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
+ while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
+ 12) >> 19) & 1) != 1) ;
+ /* outl(i_ADDIDATAConversionTime , devpriv->iobase+i_Offset + 32); */
+ outl(s_BoardInfos[dev->minor].i_ADDIDATAConversionTime,
+ devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 32);
+ /*****************************/
+ /*Read the calibration offset */
+ /*****************************/
+ /* ui_Temp = inl(devpriv->iobase+i_Offset + 12); */
+ ui_Temp = inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12);
+
+ /*********************************/
+ /*Configure the Offset Conversion */
+ /*********************************/
+ /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
+ while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
+ 12) >> 19) & 1) != 1) ;
+ /* outl((ui_Temp | 0x00020000), devpriv->iobase+i_Offset + 12); */
+ outl((ui_Temp | 0x00020000),
+ devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12);
+ /*******************************/
+ /*Initialise ui_CommandRegister */
+ /*******************************/
+
+ ui_CommandRegister = 0;
+
+ /*********************************/
+ /*Test if the interrupt is enable */
+ /*********************************/
+
+ /* if (i_InterruptFlag == ADDIDATA_ENABLE) */
+ if (s_BoardInfos[dev->minor].i_InterruptFlag == ADDIDATA_ENABLE) {
+
+ /**********************/
+ /*Enable the interrupt */
+ /**********************/
+
+ ui_CommandRegister = ui_CommandRegister | 0x00100000;
+
+ } /* if (i_InterruptFlag == ADDIDATA_ENABLE) */
+
+ /**********************/
+ /*Start the conversion */
+ /**********************/
+ ui_CommandRegister = ui_CommandRegister | 0x00080000;
+
+ /***************************/
+ /*Write the command regiter */
+ /***************************/
+ /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
+ while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
+ 12) >> 19) & 1) != 1) ;
+ /* outl(ui_CommandRegister, devpriv->iobase+i_Offset + 8); */
+ outl(ui_CommandRegister,
+ devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 8);
+
+ /*****************************/
+ /*Test if interrupt is enable */
+ /*****************************/
+
+ /* if (i_InterruptFlag == ADDIDATA_DISABLE) */
+ if (s_BoardInfos[dev->minor].i_InterruptFlag == ADDIDATA_DISABLE) {
+
+ do {
+ /*******************/
+ /*Read the EOC flag */
+ /*******************/
+
+ /* ui_EOC = inl (devpriv->iobase+i_Offset + 20) & 1; */
+ ui_EOC = inl(devpriv->iobase +
+ s_BoardInfos[dev->minor].i_Offset + 20) & 1;
+
+ } while (ui_EOC != 1);
+
+ /**************************************************/
+ /*Read the digital value of the calibration Offset */
+ /**************************************************/
+
+ /* data[0] = inl(devpriv->iobase+i_Offset+ 28); */
+ data[0] =
+ inl(devpriv->iobase +
+ s_BoardInfos[dev->minor].i_Offset + 28);
+ } /* if (i_InterruptFlag == ADDIDATA_DISABLE) */
+ return 0;
+}
+
+static int i_APCI3200_ReadCalibrationGainValue(struct comedi_device *dev,
+ unsigned int *data)
+{
+ struct addi_private *devpriv = dev->private;
+ unsigned int ui_EOC = 0;
+ int ui_CommandRegister = 0;
+
+ /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
+ while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
+ 12) >> 19) & 1) != 1) ;
+ /*********************************/
+ /* Write the channel to configure */
+ /*********************************/
+ /* Begin JK 20.10.2004: This seems not necessary ! */
+ /* outl(0 | ui_Channel_num , devpriv->iobase+i_Offset + 0x4); */
+ /* outl(0 | s_BoardInfos [dev->minor].ui_Channel_num , devpriv->iobase+s_BoardInfos [dev->minor].i_Offset + 0x4); */
+ /* End JK 20.10.2004: This seems not necessary ! */
+
+ /***************************/
+ /*Read the calibration gain */
+ /***************************/
+ /*******************************/
+ /* Set the convert timing unit */
+ /*******************************/
+ /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
+ while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
+ 12) >> 19) & 1) != 1) ;
+ /* outl(i_ADDIDATAConversionTimeUnit , devpriv->iobase+i_Offset + 36); */
+ outl(s_BoardInfos[dev->minor].i_ADDIDATAConversionTimeUnit,
+ devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 36);
+ /**************************/
+ /* Set the convert timing */
+ /**************************/
+ /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
+ while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
+ 12) >> 19) & 1) != 1) ;
+ /* outl(i_ADDIDATAConversionTime , devpriv->iobase+i_Offset + 32); */
+ outl(s_BoardInfos[dev->minor].i_ADDIDATAConversionTime,
+ devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 32);
+ /*******************************/
+ /*Configure the Gain Conversion */
+ /*******************************/
+ /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
+ while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
+ 12) >> 19) & 1) != 1) ;
+ /* outl(0x00040000 , devpriv->iobase+i_Offset + 12); */
+ outl(0x00040000,
+ devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12);
+
+ /*******************************/
+ /*Initialise ui_CommandRegister */
+ /*******************************/
+
+ ui_CommandRegister = 0;
+
+ /*********************************/
+ /*Test if the interrupt is enable */
+ /*********************************/
+
+ /* if (i_InterruptFlag == ADDIDATA_ENABLE) */
+ if (s_BoardInfos[dev->minor].i_InterruptFlag == ADDIDATA_ENABLE) {
+
+ /**********************/
+ /*Enable the interrupt */
+ /**********************/
+
+ ui_CommandRegister = ui_CommandRegister | 0x00100000;
+
+ } /* if (i_InterruptFlag == ADDIDATA_ENABLE) */
+
+ /**********************/
+ /*Start the conversion */
+ /**********************/
+
+ ui_CommandRegister = ui_CommandRegister | 0x00080000;
+ /***************************/
+ /*Write the command regiter */
+ /***************************/
+ /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
+ while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
+ 12) >> 19) & 1) != 1) ;
+ /* outl(ui_CommandRegister , devpriv->iobase+i_Offset + 8); */
+ outl(ui_CommandRegister,
+ devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 8);
+
+ /*****************************/
+ /*Test if interrupt is enable */
+ /*****************************/
+
+ /* if (i_InterruptFlag == ADDIDATA_DISABLE) */
+ if (s_BoardInfos[dev->minor].i_InterruptFlag == ADDIDATA_DISABLE) {
+
+ do {
+
+ /*******************/
+ /*Read the EOC flag */
+ /*******************/
+
+ /* ui_EOC = inl(devpriv->iobase+i_Offset + 20) & 1; */
+ ui_EOC = inl(devpriv->iobase +
+ s_BoardInfos[dev->minor].i_Offset + 20) & 1;
+
+ } while (ui_EOC != 1);
+
+ /************************************************/
+ /*Read the digital value of the calibration Gain */
+ /************************************************/
+
+ /* data[0] = inl(devpriv->iobase+i_Offset + 28); */
+ data[0] =
+ inl(devpriv->iobase +
+ s_BoardInfos[dev->minor].i_Offset + 28);
+
+ } /* if (i_InterruptFlag == ADDIDATA_DISABLE) */
+ return 0;
+}
+
+static int i_APCI3200_ReadCJCValue(struct comedi_device *dev,
+ unsigned int *data)
+{
+ struct addi_private *devpriv = dev->private;
+ unsigned int ui_EOC = 0;
+ int ui_CommandRegister = 0;
+
+ /******************************/
+ /*Set the converting time unit */
+ /******************************/
+
+ /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
+ while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
+ 12) >> 19) & 1) != 1) ;
+
+ /* outl(i_ADDIDATAConversionTimeUnit , devpriv->iobase+i_Offset + 36); */
+ outl(s_BoardInfos[dev->minor].i_ADDIDATAConversionTimeUnit,
+ devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 36);
+ /**************************/
+ /* Set the convert timing */
+ /**************************/
+ /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
+ while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
+ 12) >> 19) & 1) != 1) ;
+
+ /* outl(i_ADDIDATAConversionTime , devpriv->iobase+i_Offset + 32); */
+ outl(s_BoardInfos[dev->minor].i_ADDIDATAConversionTime,
+ devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 32);
+
+ /******************************/
+ /*Configure the CJC Conversion */
+ /******************************/
+ /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
+ while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
+ 12) >> 19) & 1) != 1) ;
+
+ /* outl( 0x00000400 , devpriv->iobase+i_Offset + 4); */
+ outl(0x00000400,
+ devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 4);
+ /*******************************/
+ /*Initialise dw_CommandRegister */
+ /*******************************/
+ ui_CommandRegister = 0;
+ /*********************************/
+ /*Test if the interrupt is enable */
+ /*********************************/
+ /* if (i_InterruptFlag == ADDIDATA_ENABLE) */
+ if (s_BoardInfos[dev->minor].i_InterruptFlag == ADDIDATA_ENABLE) {
+ /**********************/
+ /*Enable the interrupt */
+ /**********************/
+ ui_CommandRegister = ui_CommandRegister | 0x00100000;
+ }
+
+ /**********************/
+ /*Start the conversion */
+ /**********************/
+
+ ui_CommandRegister = ui_CommandRegister | 0x00080000;
+
+ /***************************/
+ /*Write the command regiter */
+ /***************************/
+ /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
+ while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
+ 12) >> 19) & 1) != 1) ;
+ /* outl(ui_CommandRegister , devpriv->iobase+i_Offset + 8); */
+ outl(ui_CommandRegister,
+ devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 8);
+
+ /*****************************/
+ /*Test if interrupt is enable */
+ /*****************************/
+
+ /* if (i_InterruptFlag == ADDIDATA_DISABLE) */
+ if (s_BoardInfos[dev->minor].i_InterruptFlag == ADDIDATA_DISABLE) {
+ do {
+
+ /*******************/
+ /*Read the EOC flag */
+ /*******************/
+
+ /* ui_EOC = inl(devpriv->iobase+i_Offset + 20) & 1; */
+ ui_EOC = inl(devpriv->iobase +
+ s_BoardInfos[dev->minor].i_Offset + 20) & 1;
+
+ } while (ui_EOC != 1);
+
+ /***********************************/
+ /*Read the digital value of the CJC */
+ /***********************************/
+
+ /* data[0] = inl(devpriv->iobase+i_Offset + 28); */
+ data[0] =
+ inl(devpriv->iobase +
+ s_BoardInfos[dev->minor].i_Offset + 28);
+
+ } /* if (i_InterruptFlag == ADDIDATA_DISABLE) */
+ return 0;
+}
+
+static int i_APCI3200_ReadCJCCalOffset(struct comedi_device *dev,
+ unsigned int *data)
+{
+ struct addi_private *devpriv = dev->private;
+ unsigned int ui_EOC = 0;
+ int ui_CommandRegister = 0;
+
+ /*******************************************/
+ /*Read calibration offset value for the CJC */
+ /*******************************************/
+ /*******************************/
+ /* Set the convert timing unit */
+ /*******************************/
+ /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
+ while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
+ 12) >> 19) & 1) != 1) ;
+ /* outl(i_ADDIDATAConversionTimeUnit , devpriv->iobase+i_Offset + 36); */
+ outl(s_BoardInfos[dev->minor].i_ADDIDATAConversionTimeUnit,
+ devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 36);
+ /**************************/
+ /* Set the convert timing */
+ /**************************/
+ /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
+ while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
+ 12) >> 19) & 1) != 1) ;
+ /* outl(i_ADDIDATAConversionTime , devpriv->iobase+i_Offset + 32); */
+ outl(s_BoardInfos[dev->minor].i_ADDIDATAConversionTime,
+ devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 32);
+ /******************************/
+ /*Configure the CJC Conversion */
+ /******************************/
+ /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
+ while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
+ 12) >> 19) & 1) != 1) ;
+ /* outl(0x00000400 , devpriv->iobase+i_Offset + 4); */
+ outl(0x00000400,
+ devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 4);
+ /*********************************/
+ /*Configure the Offset Conversion */
+ /*********************************/
+ /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
+ while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
+ 12) >> 19) & 1) != 1) ;
+ /* outl(0x00020000, devpriv->iobase+i_Offset + 12); */
+ outl(0x00020000,
+ devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12);
+ /*******************************/
+ /*Initialise ui_CommandRegister */
+ /*******************************/
+ ui_CommandRegister = 0;
+ /*********************************/
+ /*Test if the interrupt is enable */
+ /*********************************/
+
+ /* if (i_InterruptFlag == ADDIDATA_ENABLE) */
+ if (s_BoardInfos[dev->minor].i_InterruptFlag == ADDIDATA_ENABLE) {
+ /**********************/
+ /*Enable the interrupt */
+ /**********************/
+ ui_CommandRegister = ui_CommandRegister | 0x00100000;
+
+ }
+
+ /**********************/
+ /*Start the conversion */
+ /**********************/
+ ui_CommandRegister = ui_CommandRegister | 0x00080000;
+ /***************************/
+ /*Write the command regiter */
+ /***************************/
+ /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
+ while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
+ 12) >> 19) & 1) != 1) ;
+ /* outl(ui_CommandRegister,devpriv->iobase+i_Offset + 8); */
+ outl(ui_CommandRegister,
+ devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 8);
+ /* if (i_InterruptFlag == ADDIDATA_DISABLE) */
+ if (s_BoardInfos[dev->minor].i_InterruptFlag == ADDIDATA_DISABLE) {
+ do {
+ /*******************/
+ /*Read the EOC flag */
+ /*******************/
+ /* ui_EOC = inl(devpriv->iobase+i_Offset + 20) & 1; */
+ ui_EOC = inl(devpriv->iobase +
+ s_BoardInfos[dev->minor].i_Offset + 20) & 1;
+ } while (ui_EOC != 1);
+
+ /**************************************************/
+ /*Read the digital value of the calibration Offset */
+ /**************************************************/
+ /* data[0] = inl(devpriv->iobase+i_Offset + 28); */
+ data[0] =
+ inl(devpriv->iobase +
+ s_BoardInfos[dev->minor].i_Offset + 28);
+ } /* if (i_InterruptFlag == ADDIDATA_DISABLE) */
+ return 0;
+}
+
+static int i_APCI3200_ReadCJCCalGain(struct comedi_device *dev,
+ unsigned int *data)
+{
+ struct addi_private *devpriv = dev->private;
+ unsigned int ui_EOC = 0;
+ int ui_CommandRegister = 0;
+
+ /*******************************/
+ /* Set the convert timing unit */
+ /*******************************/
+ /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
+ while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
+ 12) >> 19) & 1) != 1) ;
+ /* outl(i_ADDIDATAConversionTimeUnit , devpriv->iobase+i_Offset + 36); */
+ outl(s_BoardInfos[dev->minor].i_ADDIDATAConversionTimeUnit,
+ devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 36);
+ /**************************/
+ /* Set the convert timing */
+ /**************************/
+ /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
+ while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
+ 12) >> 19) & 1) != 1) ;
+ /* outl(i_ADDIDATAConversionTime , devpriv->iobase+i_Offset + 32); */
+ outl(s_BoardInfos[dev->minor].i_ADDIDATAConversionTime,
+ devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 32);
+ /******************************/
+ /*Configure the CJC Conversion */
+ /******************************/
+ /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
+ while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
+ 12) >> 19) & 1) != 1) ;
+ /* outl(0x00000400,devpriv->iobase+i_Offset + 4); */
+ outl(0x00000400,
+ devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 4);
+ /*******************************/
+ /*Configure the Gain Conversion */
+ /*******************************/
+ /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
+ while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
+ 12) >> 19) & 1) != 1) ;
+ /* outl(0x00040000,devpriv->iobase+i_Offset + 12); */
+ outl(0x00040000,
+ devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12);
+
+ /*******************************/
+ /*Initialise dw_CommandRegister */
+ /*******************************/
+ ui_CommandRegister = 0;
+ /*********************************/
+ /*Test if the interrupt is enable */
+ /*********************************/
+ /* if (i_InterruptFlag == ADDIDATA_ENABLE) */
+ if (s_BoardInfos[dev->minor].i_InterruptFlag == ADDIDATA_ENABLE) {
+ /**********************/
+ /*Enable the interrupt */
+ /**********************/
+ ui_CommandRegister = ui_CommandRegister | 0x00100000;
+ }
+ /**********************/
+ /*Start the conversion */
+ /**********************/
+ ui_CommandRegister = ui_CommandRegister | 0x00080000;
+ /***************************/
+ /*Write the command regiter */
+ /***************************/
+ /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
+ while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
+ 12) >> 19) & 1) != 1) ;
+ /* outl(ui_CommandRegister ,devpriv->iobase+i_Offset + 8); */
+ outl(ui_CommandRegister,
+ devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 8);
+ /* if (i_InterruptFlag == ADDIDATA_DISABLE) */
+ if (s_BoardInfos[dev->minor].i_InterruptFlag == ADDIDATA_DISABLE) {
+ do {
+ /*******************/
+ /*Read the EOC flag */
+ /*******************/
+ /* ui_EOC = inl(devpriv->iobase+i_Offset + 20) & 1; */
+ ui_EOC = inl(devpriv->iobase +
+ s_BoardInfos[dev->minor].i_Offset + 20) & 1;
+ } while (ui_EOC != 1);
+ /************************************************/
+ /*Read the digital value of the calibration Gain */
+ /************************************************/
+ /* data[0] = inl (devpriv->iobase+i_Offset + 28); */
+ data[0] =
+ inl(devpriv->iobase +
+ s_BoardInfos[dev->minor].i_Offset + 28);
+ } /* if (i_InterruptFlag == ADDIDATA_DISABLE) */
+ return 0;
+}
+
+static int i_APCI3200_Reset(struct comedi_device *dev)
+{
+ struct addi_private *devpriv = dev->private;
+ int i_Temp;
+ unsigned int dw_Dummy;
+
+ /* i_InterruptFlag=0; */
+ /* i_Initialised==0; */
+ /* i_Count=0; */
+ /* i_Sum=0; */
+
+ s_BoardInfos[dev->minor].i_InterruptFlag = 0;
+ s_BoardInfos[dev->minor].i_Initialised = 0;
+ s_BoardInfos[dev->minor].i_Count = 0;
+ s_BoardInfos[dev->minor].i_Sum = 0;
+ s_BoardInfos[dev->minor].b_StructInitialized = 0;
+
+ outl(0x83838383, devpriv->i_IobaseAmcc + 0x60);
+
+ /* Enable the interrupt for the controller */
+ dw_Dummy = inl(devpriv->i_IobaseAmcc + 0x38);
+ outl(dw_Dummy | 0x2000, devpriv->i_IobaseAmcc + 0x38);
+ outl(0, devpriv->i_IobaseAddon); /* Resets the output */
+ /***************/
+ /*Empty the buffer */
+ /**************/
+ for (i_Temp = 0; i_Temp <= 95; i_Temp++) {
+ /* ui_InterruptChannelValue[i_Temp]=0; */
+ s_BoardInfos[dev->minor].ui_InterruptChannelValue[i_Temp] = 0;
+ } /* for(i_Temp=0;i_Temp<=95;i_Temp++) */
+ /*****************************/
+ /*Reset the START and IRQ bit */
+ /*****************************/
+ for (i_Temp = 0; i_Temp <= 192;) {
+ while (((inl(devpriv->iobase + i_Temp + 12) >> 19) & 1) != 1) ;
+ outl(0, devpriv->iobase + i_Temp + 8);
+ i_Temp = i_Temp + 64;
+ } /* for(i_Temp=0;i_Temp<=192;i_Temp+64) */
+ return 0;
+}
+
+/*
+ * Read value of the selected channel
+ *
+ * data[0] : Digital Value Of Input
+ * data[1] : Calibration Offset Value
+ * data[2] : Calibration Gain Value
+ * data[3] : CJC value
+ * data[4] : CJC offset value
+ * data[5] : CJC gain value
+ * data[6] : CJC current source from eeprom
+ * data[7] : Channel current source from eeprom
+ * data[8] : Channle gain factor from eeprom
+ */
+static int i_APCI3200_ReadAnalogInput(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
+{
+ unsigned int ui_DummyValue = 0;
+ int i_ConvertCJCCalibration;
+ int i = 0;
+
+ /* BEGIN JK 06.07.04: Management of sevrals boards */
+ /* if(i_Initialised==0) */
+ if (s_BoardInfos[dev->minor].i_Initialised == 0)
+ /* END JK 06.07.04: Management of sevrals boards */
+ {
+ i_APCI3200_Reset(dev);
return -EINVAL;
- } /* if ( (data[0]!=0) && (data[0]!=1) ) */
- if (data[0]) {
- devpriv->b_OutputMemoryStatus = ADDIDATA_ENABLE;
- } /* if (data[0]) */
- else {
- devpriv->b_OutputMemoryStatus = ADDIDATA_DISABLE;
- } /* else if (data[0]) */
- return insn->n;
-}
+ } /* if(i_Initialised==0); */
-/*
- +----------------------------------------------------------------------------+
- | Function Name : int i_APCI3200_WriteDigitalOutput |
- | (struct comedi_device *dev,struct comedi_subdevice *s, |
- | struct comedi_insn *insn,unsigned int *data) |
- +----------------------------------------------------------------------------+
- | Task : writes To the digital Output Subdevice |
- +----------------------------------------------------------------------------+
- | Input Parameters : struct comedi_device *dev : Driver handle |
- | struct comedi_subdevice *s : Subdevice Pointer |
- | struct comedi_insn *insn : Insn Structure Pointer |
- | unsigned int *data : Data Pointer contains |
- | configuration parameters as below |
- | data[0] :Value to output
- data[1] : 0 o/p single channel
- 1 o/p port
- data[2] : port no
- data[3] :0 set the digital o/p on
- 1 set the digital o/p off
- +----------------------------------------------------------------------------+
- | Output Parameters : -- |
- +----------------------------------------------------------------------------+
- | Return Value : TRUE : No error occur |
- | : FALSE : Error occur. Return the error |
- | |
- +----------------------------------------------------------------------------+
-*/
-int i_APCI3200_WriteDigitalOutput(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data)
-{
- unsigned int ui_Temp = 0, ui_Temp1 = 0;
- unsigned int ui_NoOfChannel = CR_CHAN(insn->chanspec); /* get the channel */
- if (devpriv->b_OutputMemoryStatus) {
- ui_Temp = inl(devpriv->i_IobaseAddon);
+#ifdef PRINT_INFO
+ printk("\n insn->unused[0] = %i", insn->unused[0]);
+#endif
- } /* if(devpriv->b_OutputMemoryStatus ) */
- else {
- ui_Temp = 0;
- } /* if(devpriv->b_OutputMemoryStatus ) */
- if (data[3] == 0) {
- if (data[1] == 0) {
- data[0] = (data[0] << ui_NoOfChannel) | ui_Temp;
- outl(data[0], devpriv->i_IobaseAddon);
- } /* if(data[1]==0) */
+ switch (insn->unused[0]) {
+ case 0:
+
+ i_APCI3200_Read1AnalogInputChannel(dev, s, insn,
+ &ui_DummyValue);
+ /* BEGIN JK 06.07.04: Management of sevrals boards */
+ /* ui_InterruptChannelValue[i_Count+0]=ui_DummyValue; */
+ s_BoardInfos[dev->minor].
+ ui_InterruptChannelValue[s_BoardInfos[dev->minor].
+ i_Count + 0] = ui_DummyValue;
+ /* END JK 06.07.04: Management of sevrals boards */
+
+ /* Begin JK 25.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
+ i_APCI3200_GetChannelCalibrationValue(dev,
+ s_BoardInfos[dev->minor].ui_Channel_num,
+ &s_BoardInfos[dev->minor].
+ ui_InterruptChannelValue[s_BoardInfos[dev->minor].
+ i_Count + 6],
+ &s_BoardInfos[dev->minor].
+ ui_InterruptChannelValue[s_BoardInfos[dev->minor].
+ i_Count + 7],
+ &s_BoardInfos[dev->minor].
+ ui_InterruptChannelValue[s_BoardInfos[dev->minor].
+ i_Count + 8]);
+
+#ifdef PRINT_INFO
+ printk("\n s_BoardInfos [dev->minor].ui_InterruptChannelValue[s_BoardInfos [dev->minor].i_Count+6] = %lu", s_BoardInfos[dev->minor].ui_InterruptChannelValue[s_BoardInfos[dev->minor].i_Count + 6]);
+
+ printk("\n s_BoardInfos [dev->minor].ui_InterruptChannelValue[s_BoardInfos [dev->minor].i_Count+7] = %lu", s_BoardInfos[dev->minor].ui_InterruptChannelValue[s_BoardInfos[dev->minor].i_Count + 7]);
+
+ printk("\n s_BoardInfos [dev->minor].ui_InterruptChannelValue[s_BoardInfos [dev->minor].i_Count+8] = %lu", s_BoardInfos[dev->minor].ui_InterruptChannelValue[s_BoardInfos[dev->minor].i_Count + 8]);
+#endif
+
+ /* End JK 25.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
+
+ /* BEGIN JK 06.07.04: Management of sevrals boards */
+ /* if((i_ADDIDATAType==2) && (i_InterruptFlag == FALSE) && (i_CJCAvailable==1)) */
+ if ((s_BoardInfos[dev->minor].i_ADDIDATAType == 2)
+ && (s_BoardInfos[dev->minor].i_InterruptFlag == FALSE)
+ && (s_BoardInfos[dev->minor].i_CJCAvailable == 1))
+ /* END JK 06.07.04: Management of sevrals boards */
+ {
+ i_APCI3200_ReadCJCValue(dev, &ui_DummyValue);
+ /* BEGIN JK 06.07.04: Management of sevrals boards */
+ /* ui_InterruptChannelValue[i_Count + 3]=ui_DummyValue; */
+ s_BoardInfos[dev->minor].
+ ui_InterruptChannelValue[s_BoardInfos[dev->
+ minor].i_Count + 3] = ui_DummyValue;
+ /* END JK 06.07.04: Management of sevrals boards */
+ } /* if((i_ADDIDATAType==2) && (i_InterruptFlag == FALSE)) */
else {
- if (data[1] == 1) {
- switch (ui_NoOfChannel) {
+ /* BEGIN JK 06.07.04: Management of sevrals boards */
+ /* ui_InterruptChannelValue[i_Count + 3]=0; */
+ s_BoardInfos[dev->minor].
+ ui_InterruptChannelValue[s_BoardInfos[dev->
+ minor].i_Count + 3] = 0;
+ /* END JK 06.07.04: Management of sevrals boards */
+ } /* elseif((i_ADDIDATAType==2) && (i_InterruptFlag == FALSE) && (i_CJCAvailable==1)) */
- case 2:
- data[0] =
- (data[0] << (2 *
- data[2])) | ui_Temp;
- break;
- case 3:
- data[0] = (data[0] | ui_Temp);
- break;
- } /* switch(ui_NoOfChannels) */
+ /* BEGIN JK 06.07.04: Management of sevrals boards */
+ /* if (( i_AutoCalibration == FALSE) && (i_InterruptFlag == FALSE)) */
+ if ((s_BoardInfos[dev->minor].i_AutoCalibration == FALSE)
+ && (s_BoardInfos[dev->minor].i_InterruptFlag == FALSE))
+ /* END JK 06.07.04: Management of sevrals boards */
+ {
+ i_APCI3200_ReadCalibrationOffsetValue(dev,
+ &ui_DummyValue);
+ /* BEGIN JK 06.07.04: Management of sevrals boards */
+ /* ui_InterruptChannelValue[i_Count + 1]=ui_DummyValue; */
+ s_BoardInfos[dev->minor].
+ ui_InterruptChannelValue[s_BoardInfos[dev->
+ minor].i_Count + 1] = ui_DummyValue;
+ /* END JK 06.07.04: Management of sevrals boards */
+ i_APCI3200_ReadCalibrationGainValue(dev,
+ &ui_DummyValue);
+ /* BEGIN JK 06.07.04: Management of sevrals boards */
+ /* ui_InterruptChannelValue[i_Count + 2]=ui_DummyValue; */
+ s_BoardInfos[dev->minor].
+ ui_InterruptChannelValue[s_BoardInfos[dev->
+ minor].i_Count + 2] = ui_DummyValue;
+ /* END JK 06.07.04: Management of sevrals boards */
+ } /* if (( i_AutoCalibration == FALSE) && (i_InterruptFlag == FALSE)) */
- outl(data[0], devpriv->i_IobaseAddon);
- } /* if(data[1]==1) */
+ /* BEGIN JK 06.07.04: Management of sevrals boards */
+ /* if((i_ADDIDATAType==2) && (i_InterruptFlag == FALSE)&& (i_CJCAvailable==1)) */
+ if ((s_BoardInfos[dev->minor].i_ADDIDATAType == 2)
+ && (s_BoardInfos[dev->minor].i_InterruptFlag == FALSE)
+ && (s_BoardInfos[dev->minor].i_CJCAvailable == 1))
+ /* END JK 06.07.04: Management of sevrals boards */
+ {
+ /**********************************************************/
+ /*Test if the Calibration channel must be read for the CJC */
+ /**********************************************************/
+ /**********************************/
+ /*Test if the polarity is the same */
+ /**********************************/
+ /* BEGIN JK 06.07.04: Management of sevrals boards */
+ /* if(i_CJCPolarity!=i_ADDIDATAPolarity) */
+ if (s_BoardInfos[dev->minor].i_CJCPolarity !=
+ s_BoardInfos[dev->minor].i_ADDIDATAPolarity)
+ /* END JK 06.07.04: Management of sevrals boards */
+ {
+ i_ConvertCJCCalibration = 1;
+ } /* if(i_CJCPolarity!=i_ADDIDATAPolarity) */
else {
- printk("\nSpecified channel not supported\n");
- } /* else if(data[1]==1) */
- } /* elseif(data[1]==0) */
- } /* if(data[3]==0) */
- else {
- if (data[3] == 1) {
- if (data[1] == 0) {
- data[0] = ~data[0] & 0x1;
- ui_Temp1 = 1;
- ui_Temp1 = ui_Temp1 << ui_NoOfChannel;
- ui_Temp = ui_Temp | ui_Temp1;
- data[0] = (data[0] << ui_NoOfChannel) ^ 0xf;
- data[0] = data[0] & ui_Temp;
- outl(data[0], devpriv->i_IobaseAddon);
- } /* if(data[1]==0) */
- else {
- if (data[1] == 1) {
- switch (ui_NoOfChannel) {
-
- case 2:
- data[0] = ~data[0] & 0x3;
- ui_Temp1 = 3;
- ui_Temp1 =
- ui_Temp1 << 2 * data[2];
- ui_Temp = ui_Temp | ui_Temp1;
- data[0] =
- ((data[0] << (2 *
- data
- [2])) ^
- 0xf) & ui_Temp;
-
- break;
- case 3:
- break;
-
- default:
- comedi_error(dev,
- " chan spec wrong");
- return -EINVAL; /* "sorry channel spec wrong " */
- } /* switch(ui_NoOfChannels) */
-
- outl(data[0], devpriv->i_IobaseAddon);
- } /* if(data[1]==1) */
+ /* BEGIN JK 06.07.04: Management of sevrals boards */
+ /* if(i_CJCGain==i_ADDIDATAGain) */
+ if (s_BoardInfos[dev->minor].i_CJCGain ==
+ s_BoardInfos[dev->minor].i_ADDIDATAGain)
+ /* END JK 06.07.04: Management of sevrals boards */
+ {
+ i_ConvertCJCCalibration = 0;
+ } /* if(i_CJCGain==i_ADDIDATAGain) */
else {
- printk("\nSpecified channel not supported\n");
- } /* else if(data[1]==1) */
- } /* elseif(data[1]==0) */
- } /* if(data[3]==1); */
+ i_ConvertCJCCalibration = 1;
+ } /* elseif(i_CJCGain==i_ADDIDATAGain) */
+ } /* elseif(i_CJCPolarity!=i_ADDIDATAPolarity) */
+ if (i_ConvertCJCCalibration == 1) {
+ i_APCI3200_ReadCJCCalOffset(dev,
+ &ui_DummyValue);
+ /* BEGIN JK 06.07.04: Management of sevrals boards */
+ /* ui_InterruptChannelValue[i_Count+4]=ui_DummyValue; */
+ s_BoardInfos[dev->minor].
+ ui_InterruptChannelValue[s_BoardInfos
+ [dev->minor].i_Count + 4] =
+ ui_DummyValue;
+ /* END JK 06.07.04: Management of sevrals boards */
+
+ i_APCI3200_ReadCJCCalGain(dev, &ui_DummyValue);
+
+ /* BEGIN JK 06.07.04: Management of sevrals boards */
+ /* ui_InterruptChannelValue[i_Count+5]=ui_DummyValue; */
+ s_BoardInfos[dev->minor].
+ ui_InterruptChannelValue[s_BoardInfos
+ [dev->minor].i_Count + 5] =
+ ui_DummyValue;
+ /* END JK 06.07.04: Management of sevrals boards */
+ } /* if(i_ConvertCJCCalibration==1) */
+ else {
+ /* BEGIN JK 06.07.04: Management of sevrals boards */
+ /* ui_InterruptChannelValue[i_Count+4]=0; */
+ /* ui_InterruptChannelValue[i_Count+5]=0; */
+
+ s_BoardInfos[dev->minor].
+ ui_InterruptChannelValue[s_BoardInfos
+ [dev->minor].i_Count + 4] = 0;
+ s_BoardInfos[dev->minor].
+ ui_InterruptChannelValue[s_BoardInfos
+ [dev->minor].i_Count + 5] = 0;
+ /* END JK 06.07.04: Management of sevrals boards */
+ } /* elseif(i_ConvertCJCCalibration==1) */
+ } /* if((i_ADDIDATAType==2) && (i_InterruptFlag == FALSE)) */
+
+ /* BEGIN JK 06.07.04: Management of sevrals boards */
+ /* if(i_ScanType!=1) */
+ if (s_BoardInfos[dev->minor].i_ScanType != 1) {
+ /* i_Count=0; */
+ s_BoardInfos[dev->minor].i_Count = 0;
+ } /* if(i_ScanType!=1) */
else {
- printk("\nSpecified functionality does not exist\n");
- return -EINVAL;
- } /* if else data[3]==1) */
- } /* if else data[3]==0) */
+ /* i_Count=i_Count +6; */
+ /* Begin JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
+ /* s_BoardInfos [dev->minor].i_Count=s_BoardInfos [dev->minor].i_Count +6; */
+ s_BoardInfos[dev->minor].i_Count =
+ s_BoardInfos[dev->minor].i_Count + 9;
+ /* End JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
+ } /* else if(i_ScanType!=1) */
+
+ /* if((i_ScanType==1) &&(i_InterruptFlag==1)) */
+ if ((s_BoardInfos[dev->minor].i_ScanType == 1)
+ && (s_BoardInfos[dev->minor].i_InterruptFlag == 1)) {
+ /* i_Count=i_Count-6; */
+ /* Begin JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
+ /* s_BoardInfos [dev->minor].i_Count=s_BoardInfos [dev->minor].i_Count-6; */
+ s_BoardInfos[dev->minor].i_Count =
+ s_BoardInfos[dev->minor].i_Count - 9;
+ /* End JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
+ }
+ /* if(i_ScanType==0) */
+ if (s_BoardInfos[dev->minor].i_ScanType == 0) {
+ /*
+ data[0]= ui_InterruptChannelValue[0];
+ data[1]= ui_InterruptChannelValue[1];
+ data[2]= ui_InterruptChannelValue[2];
+ data[3]= ui_InterruptChannelValue[3];
+ data[4]= ui_InterruptChannelValue[4];
+ data[5]= ui_InterruptChannelValue[5];
+ */
+#ifdef PRINT_INFO
+ printk("\n data[0]= s_BoardInfos [dev->minor].ui_InterruptChannelValue[0];");
+#endif
+ data[0] =
+ s_BoardInfos[dev->minor].
+ ui_InterruptChannelValue[0];
+ data[1] =
+ s_BoardInfos[dev->minor].
+ ui_InterruptChannelValue[1];
+ data[2] =
+ s_BoardInfos[dev->minor].
+ ui_InterruptChannelValue[2];
+ data[3] =
+ s_BoardInfos[dev->minor].
+ ui_InterruptChannelValue[3];
+ data[4] =
+ s_BoardInfos[dev->minor].
+ ui_InterruptChannelValue[4];
+ data[5] =
+ s_BoardInfos[dev->minor].
+ ui_InterruptChannelValue[5];
+
+ /* Begin JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
+ /* printk("\n 0 - i_APCI3200_GetChannelCalibrationValue data [6] = %lu, data [7] = %lu, data [8] = %lu", data [6], data [7], data [8]); */
+ i_APCI3200_GetChannelCalibrationValue(dev,
+ s_BoardInfos[dev->minor].ui_Channel_num,
+ &data[6], &data[7], &data[8]);
+ /* End JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
+ }
+ break;
+ case 1:
+
+ for (i = 0; i < insn->n; i++) {
+ /* data[i]=ui_InterruptChannelValue[i]; */
+ data[i] =
+ s_BoardInfos[dev->minor].
+ ui_InterruptChannelValue[i];
+ }
+
+ /* i_Count=0; */
+ /* i_Sum=0; */
+ /* if(i_ScanType==1) */
+ s_BoardInfos[dev->minor].i_Count = 0;
+ s_BoardInfos[dev->minor].i_Sum = 0;
+ if (s_BoardInfos[dev->minor].i_ScanType == 1) {
+ /* i_Initialised=0; */
+ /* i_InterruptFlag=0; */
+ s_BoardInfos[dev->minor].i_Initialised = 0;
+ s_BoardInfos[dev->minor].i_InterruptFlag = 0;
+ /* END JK 06.07.04: Management of sevrals boards */
+ }
+ break;
+ default:
+ printk("\nThe parameters passed are in error\n");
+ i_APCI3200_Reset(dev);
+ return -EINVAL;
+ } /* switch(insn->unused[0]) */
+
return insn->n;
}
/*
- +----------------------------------------------------------------------------+
- | Function Name : int i_APCI3200_ReadDigitalOutput |
- | (struct comedi_device *dev,struct comedi_subdevice *s, |
- | struct comedi_insn *insn,unsigned int *data) |
- +----------------------------------------------------------------------------+
- | Task : Read value of the selected channel or port |
- +----------------------------------------------------------------------------+
- | Input Parameters : struct comedi_device *dev : Driver handle |
- | unsigned int ui_NoOfChannels : No Of Channels To read |
- | unsigned int *data : Data Pointer to read status |
- data[0] :0 read single channel
- 1 read port value
- data[1] port no
-
- +----------------------------------------------------------------------------+
- | Output Parameters : -- |
- +----------------------------------------------------------------------------+
- | Return Value : TRUE : No error occur |
- | : FALSE : Error occur. Return the error |
- | |
- +----------------------------------------------------------------------------+
-*/
-int i_APCI3200_ReadDigitalOutput(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data)
+ * Configures The Analog Input Subdevice
+ *
+ * data[0] = 0 Normal AI
+ * = 1 RTD
+ * = 2 THERMOCOUPLE
+ * data[1] = Gain To Use
+ * data[2] = 0 Bipolar
+ * = 1 Unipolar
+ * data[3] = Offset Range
+ * data[4] = 0 DC Coupling
+ * = 1 AC Coupling
+ * data[5] = 0 Single
+ * = 1 Differential
+ * data[6] = TimerReloadValue
+ * data[7] = ConvertingTimeUnit
+ * data[8] = 0 Analog voltage measurement
+ * = 1 Resistance measurement
+ * = 2 Temperature measurement
+ * data[9] = 0 Interrupt Disable
+ * = 1 INterrupt Enable
+ * data[10] = Type of Thermocouple
+ * data[11] = single channel Module Number
+ * data[12] = 0 Single Read
+ * = 1 Read more channel
+ * = 2 Single scan
+ * = 3 Continuous Scan
+ * data[13] = Number of channels to read
+ * data[14] = 0 RTD not used
+ * = 1 RTD 2 wire connection
+ * = 2 RTD 3 wire connection
+ * = 3 RTD 4 wire connection
+ */
+static int i_APCI3200_ConfigAnalogInput(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
{
- unsigned int ui_Temp;
- unsigned int ui_NoOfChannel;
- ui_NoOfChannel = CR_CHAN(insn->chanspec);
- ui_Temp = data[0];
- *data = inl(devpriv->i_IobaseAddon);
- if (ui_Temp == 0) {
- *data = (*data >> ui_NoOfChannel) & 0x1;
- } /* if (ui_Temp==0) */
- else {
- if (ui_Temp == 1) {
- if (data[1] < 0 || data[1] > 1) {
- printk("\nThe port selection is in error\n");
- return -EINVAL;
- } /* if(data[1] <0 ||data[1] >1) */
- switch (ui_NoOfChannel) {
- case 2:
- *data = (*data >> (2 * data[1])) & 3;
- break;
-
- case 3:
- break;
-
- default:
- comedi_error(dev, " chan spec wrong");
- return -EINVAL; /* "sorry channel spec wrong " */
- break;
- } /* switch(ui_NoOfChannels) */
- } /* if (ui_Temp==1) */
- else {
- printk("\nSpecified channel not supported \n");
- } /* else if (ui_Temp==1) */
- } /* else if (ui_Temp==0) */
- return insn->n;
-}
-
-/*
- +----------------------------------------------------------------------------+
- | Function Name : int i_APCI3200_ConfigAnalogInput |
- | (struct comedi_device *dev,struct comedi_subdevice *s, |
- | struct comedi_insn *insn,unsigned int *data) |
- +----------------------------------------------------------------------------+
- | Task : Configures The Analog Input Subdevice |
- +----------------------------------------------------------------------------+
- | Input Parameters : struct comedi_device *dev : Driver handle |
- | struct comedi_subdevice *s : Subdevice Pointer |
- | struct comedi_insn *insn : Insn Structure Pointer |
- | unsigned int *data : Data Pointer contains |
- | configuration parameters as below |
- | |
- | data[0]
- | 0:Normal AI |
- | 1:RTD |
- | 2:THERMOCOUPLE |
- | data[1] : Gain To Use |
- | |
- | data[2] : Polarity
- | 0:Bipolar |
- | 1:Unipolar |
- | |
- | data[3] : Offset Range
- | |
- | data[4] : Coupling
- | 0:DC Coupling |
- | 1:AC Coupling |
- | |
- | data[5] :Differential/Single
- | 0:Single |
- | 1:Differential |
- | |
- | data[6] :TimerReloadValue
- | |
- | data[7] :ConvertingTimeUnit
- | |
- | data[8] :0 Analog voltage measurement
- 1 Resistance measurement
- 2 Temperature measurement
- | data[9] :Interrupt
- | 0:Disable
- | 1:Enable
- data[10] :Type of Thermocouple
- | data[11] : 0: single channel
- Module Number
- |
- | data[12]
- | 0:Single Read
- | 1:Read more channel
- 2:Single scan
- | 3:Continuous Scan
- data[13] :Number of channels to read
- | data[14] :RTD connection type
- :0:RTD not used
- 1:RTD 2 wire connection
- 2:RTD 3 wire connection
- 3:RTD 4 wire connection
- | |
- | |
- | |
- +----------------------------------------------------------------------------+
- | Output Parameters : -- |
- +----------------------------------------------------------------------------+
- | Return Value : TRUE : No error occur |
- | : FALSE : Error occur. Return the error |
- | |
- +----------------------------------------------------------------------------+
-*/
-int i_APCI3200_ConfigAnalogInput(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data)
-{
-
+ struct addi_private *devpriv = dev->private;
unsigned int ul_Config = 0, ul_Temp = 0;
unsigned int ui_ChannelNo = 0;
unsigned int ui_Dummy = 0;
@@ -1327,1083 +2095,24 @@
}
/*
- +----------------------------------------------------------------------------+
- | Function Name : int i_APCI3200_ReadAnalogInput |
- | (struct comedi_device *dev,struct comedi_subdevice *s, |
- | struct comedi_insn *insn,unsigned int *data) |
- +----------------------------------------------------------------------------+
- | Task : Read value of the selected channel |
- +----------------------------------------------------------------------------+
- | Input Parameters : struct comedi_device *dev : Driver handle |
- | unsigned int ui_NoOfChannels : No Of Channels To read |
- | unsigned int *data : Data Pointer to read status |
- +----------------------------------------------------------------------------+
- | Output Parameters : -- |
- | data[0] : Digital Value Of Input |
- | data[1] : Calibration Offset Value |
- | data[2] : Calibration Gain Value
- | data[3] : CJC value
- | data[4] : CJC offset value
- | data[5] : CJC gain value
- | Begin JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values
- | data[6] : CJC current source from eeprom
- | data[7] : Channel current source from eeprom
- | data[8] : Channle gain factor from eeprom
- | End JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values
- +----------------------------------------------------------------------------+
- | Return Value : TRUE : No error occur |
- | : FALSE : Error occur. Return the error |
- | |
- +----------------------------------------------------------------------------+
-*/
-int i_APCI3200_ReadAnalogInput(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data)
+ * Tests the Selected Anlog Input Channel
+ *
+ * data[0] = 0 TestAnalogInputShortCircuit
+ * = 1 TestAnalogInputConnection
+ *
+ * data[0] : Digital value obtained
+ * data[1] : calibration offset
+ * data[2] : calibration gain
+ */
+static int i_APCI3200_InsnBits_AnalogInput_Test(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
{
- unsigned int ui_DummyValue = 0;
- int i_ConvertCJCCalibration;
- int i = 0;
-
- /* BEGIN JK 06.07.04: Management of sevrals boards */
- /* if(i_Initialised==0) */
- if (s_BoardInfos[dev->minor].i_Initialised == 0)
- /* END JK 06.07.04: Management of sevrals boards */
- {
- i_APCI3200_Reset(dev);
- return -EINVAL;
- } /* if(i_Initialised==0); */
-
-#ifdef PRINT_INFO
- printk("\n insn->unused[0] = %i", insn->unused[0]);
-#endif
-
- switch (insn->unused[0]) {
- case 0:
-
- i_APCI3200_Read1AnalogInputChannel(dev, s, insn,
- &ui_DummyValue);
- /* BEGIN JK 06.07.04: Management of sevrals boards */
- /* ui_InterruptChannelValue[i_Count+0]=ui_DummyValue; */
- s_BoardInfos[dev->minor].
- ui_InterruptChannelValue[s_BoardInfos[dev->minor].
- i_Count + 0] = ui_DummyValue;
- /* END JK 06.07.04: Management of sevrals boards */
-
- /* Begin JK 25.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
- i_APCI3200_GetChannelCalibrationValue(dev,
- s_BoardInfos[dev->minor].ui_Channel_num,
- &s_BoardInfos[dev->minor].
- ui_InterruptChannelValue[s_BoardInfos[dev->minor].
- i_Count + 6],
- &s_BoardInfos[dev->minor].
- ui_InterruptChannelValue[s_BoardInfos[dev->minor].
- i_Count + 7],
- &s_BoardInfos[dev->minor].
- ui_InterruptChannelValue[s_BoardInfos[dev->minor].
- i_Count + 8]);
-
-#ifdef PRINT_INFO
- printk("\n s_BoardInfos [dev->minor].ui_InterruptChannelValue[s_BoardInfos [dev->minor].i_Count+6] = %lu", s_BoardInfos[dev->minor].ui_InterruptChannelValue[s_BoardInfos[dev->minor].i_Count + 6]);
-
- printk("\n s_BoardInfos [dev->minor].ui_InterruptChannelValue[s_BoardInfos [dev->minor].i_Count+7] = %lu", s_BoardInfos[dev->minor].ui_InterruptChannelValue[s_BoardInfos[dev->minor].i_Count + 7]);
-
- printk("\n s_BoardInfos [dev->minor].ui_InterruptChannelValue[s_BoardInfos [dev->minor].i_Count+8] = %lu", s_BoardInfos[dev->minor].ui_InterruptChannelValue[s_BoardInfos[dev->minor].i_Count + 8]);
-#endif
-
- /* End JK 25.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
-
- /* BEGIN JK 06.07.04: Management of sevrals boards */
- /* if((i_ADDIDATAType==2) && (i_InterruptFlag == FALSE) && (i_CJCAvailable==1)) */
- if ((s_BoardInfos[dev->minor].i_ADDIDATAType == 2)
- && (s_BoardInfos[dev->minor].i_InterruptFlag == FALSE)
- && (s_BoardInfos[dev->minor].i_CJCAvailable == 1))
- /* END JK 06.07.04: Management of sevrals boards */
- {
- i_APCI3200_ReadCJCValue(dev, &ui_DummyValue);
- /* BEGIN JK 06.07.04: Management of sevrals boards */
- /* ui_InterruptChannelValue[i_Count + 3]=ui_DummyValue; */
- s_BoardInfos[dev->minor].
- ui_InterruptChannelValue[s_BoardInfos[dev->
- minor].i_Count + 3] = ui_DummyValue;
- /* END JK 06.07.04: Management of sevrals boards */
- } /* if((i_ADDIDATAType==2) && (i_InterruptFlag == FALSE)) */
- else {
- /* BEGIN JK 06.07.04: Management of sevrals boards */
- /* ui_InterruptChannelValue[i_Count + 3]=0; */
- s_BoardInfos[dev->minor].
- ui_InterruptChannelValue[s_BoardInfos[dev->
- minor].i_Count + 3] = 0;
- /* END JK 06.07.04: Management of sevrals boards */
- } /* elseif((i_ADDIDATAType==2) && (i_InterruptFlag == FALSE) && (i_CJCAvailable==1)) */
-
- /* BEGIN JK 06.07.04: Management of sevrals boards */
- /* if (( i_AutoCalibration == FALSE) && (i_InterruptFlag == FALSE)) */
- if ((s_BoardInfos[dev->minor].i_AutoCalibration == FALSE)
- && (s_BoardInfos[dev->minor].i_InterruptFlag == FALSE))
- /* END JK 06.07.04: Management of sevrals boards */
- {
- i_APCI3200_ReadCalibrationOffsetValue(dev,
- &ui_DummyValue);
- /* BEGIN JK 06.07.04: Management of sevrals boards */
- /* ui_InterruptChannelValue[i_Count + 1]=ui_DummyValue; */
- s_BoardInfos[dev->minor].
- ui_InterruptChannelValue[s_BoardInfos[dev->
- minor].i_Count + 1] = ui_DummyValue;
- /* END JK 06.07.04: Management of sevrals boards */
- i_APCI3200_ReadCalibrationGainValue(dev,
- &ui_DummyValue);
- /* BEGIN JK 06.07.04: Management of sevrals boards */
- /* ui_InterruptChannelValue[i_Count + 2]=ui_DummyValue; */
- s_BoardInfos[dev->minor].
- ui_InterruptChannelValue[s_BoardInfos[dev->
- minor].i_Count + 2] = ui_DummyValue;
- /* END JK 06.07.04: Management of sevrals boards */
- } /* if (( i_AutoCalibration == FALSE) && (i_InterruptFlag == FALSE)) */
-
- /* BEGIN JK 06.07.04: Management of sevrals boards */
- /* if((i_ADDIDATAType==2) && (i_InterruptFlag == FALSE)&& (i_CJCAvailable==1)) */
- if ((s_BoardInfos[dev->minor].i_ADDIDATAType == 2)
- && (s_BoardInfos[dev->minor].i_InterruptFlag == FALSE)
- && (s_BoardInfos[dev->minor].i_CJCAvailable == 1))
- /* END JK 06.07.04: Management of sevrals boards */
- {
- /**********************************************************/
- /*Test if the Calibration channel must be read for the CJC */
- /**********************************************************/
- /**********************************/
- /*Test if the polarity is the same */
- /**********************************/
- /* BEGIN JK 06.07.04: Management of sevrals boards */
- /* if(i_CJCPolarity!=i_ADDIDATAPolarity) */
- if (s_BoardInfos[dev->minor].i_CJCPolarity !=
- s_BoardInfos[dev->minor].i_ADDIDATAPolarity)
- /* END JK 06.07.04: Management of sevrals boards */
- {
- i_ConvertCJCCalibration = 1;
- } /* if(i_CJCPolarity!=i_ADDIDATAPolarity) */
- else {
- /* BEGIN JK 06.07.04: Management of sevrals boards */
- /* if(i_CJCGain==i_ADDIDATAGain) */
- if (s_BoardInfos[dev->minor].i_CJCGain ==
- s_BoardInfos[dev->minor].i_ADDIDATAGain)
- /* END JK 06.07.04: Management of sevrals boards */
- {
- i_ConvertCJCCalibration = 0;
- } /* if(i_CJCGain==i_ADDIDATAGain) */
- else {
- i_ConvertCJCCalibration = 1;
- } /* elseif(i_CJCGain==i_ADDIDATAGain) */
- } /* elseif(i_CJCPolarity!=i_ADDIDATAPolarity) */
- if (i_ConvertCJCCalibration == 1) {
- i_APCI3200_ReadCJCCalOffset(dev,
- &ui_DummyValue);
- /* BEGIN JK 06.07.04: Management of sevrals boards */
- /* ui_InterruptChannelValue[i_Count+4]=ui_DummyValue; */
- s_BoardInfos[dev->minor].
- ui_InterruptChannelValue[s_BoardInfos
- [dev->minor].i_Count + 4] =
- ui_DummyValue;
- /* END JK 06.07.04: Management of sevrals boards */
-
- i_APCI3200_ReadCJCCalGain(dev, &ui_DummyValue);
-
- /* BEGIN JK 06.07.04: Management of sevrals boards */
- /* ui_InterruptChannelValue[i_Count+5]=ui_DummyValue; */
- s_BoardInfos[dev->minor].
- ui_InterruptChannelValue[s_BoardInfos
- [dev->minor].i_Count + 5] =
- ui_DummyValue;
- /* END JK 06.07.04: Management of sevrals boards */
- } /* if(i_ConvertCJCCalibration==1) */
- else {
- /* BEGIN JK 06.07.04: Management of sevrals boards */
- /* ui_InterruptChannelValue[i_Count+4]=0; */
- /* ui_InterruptChannelValue[i_Count+5]=0; */
-
- s_BoardInfos[dev->minor].
- ui_InterruptChannelValue[s_BoardInfos
- [dev->minor].i_Count + 4] = 0;
- s_BoardInfos[dev->minor].
- ui_InterruptChannelValue[s_BoardInfos
- [dev->minor].i_Count + 5] = 0;
- /* END JK 06.07.04: Management of sevrals boards */
- } /* elseif(i_ConvertCJCCalibration==1) */
- } /* if((i_ADDIDATAType==2) && (i_InterruptFlag == FALSE)) */
-
- /* BEGIN JK 06.07.04: Management of sevrals boards */
- /* if(i_ScanType!=1) */
- if (s_BoardInfos[dev->minor].i_ScanType != 1) {
- /* i_Count=0; */
- s_BoardInfos[dev->minor].i_Count = 0;
- } /* if(i_ScanType!=1) */
- else {
- /* i_Count=i_Count +6; */
- /* Begin JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
- /* s_BoardInfos [dev->minor].i_Count=s_BoardInfos [dev->minor].i_Count +6; */
- s_BoardInfos[dev->minor].i_Count =
- s_BoardInfos[dev->minor].i_Count + 9;
- /* End JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
- } /* else if(i_ScanType!=1) */
-
- /* if((i_ScanType==1) &&(i_InterruptFlag==1)) */
- if ((s_BoardInfos[dev->minor].i_ScanType == 1)
- && (s_BoardInfos[dev->minor].i_InterruptFlag == 1)) {
- /* i_Count=i_Count-6; */
- /* Begin JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
- /* s_BoardInfos [dev->minor].i_Count=s_BoardInfos [dev->minor].i_Count-6; */
- s_BoardInfos[dev->minor].i_Count =
- s_BoardInfos[dev->minor].i_Count - 9;
- /* End JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
- }
- /* if(i_ScanType==0) */
- if (s_BoardInfos[dev->minor].i_ScanType == 0) {
- /*
- data[0]= ui_InterruptChannelValue[0];
- data[1]= ui_InterruptChannelValue[1];
- data[2]= ui_InterruptChannelValue[2];
- data[3]= ui_InterruptChannelValue[3];
- data[4]= ui_InterruptChannelValue[4];
- data[5]= ui_InterruptChannelValue[5];
- */
-#ifdef PRINT_INFO
- printk("\n data[0]= s_BoardInfos [dev->minor].ui_InterruptChannelValue[0];");
-#endif
- data[0] =
- s_BoardInfos[dev->minor].
- ui_InterruptChannelValue[0];
- data[1] =
- s_BoardInfos[dev->minor].
- ui_InterruptChannelValue[1];
- data[2] =
- s_BoardInfos[dev->minor].
- ui_InterruptChannelValue[2];
- data[3] =
- s_BoardInfos[dev->minor].
- ui_InterruptChannelValue[3];
- data[4] =
- s_BoardInfos[dev->minor].
- ui_InterruptChannelValue[4];
- data[5] =
- s_BoardInfos[dev->minor].
- ui_InterruptChannelValue[5];
-
- /* Begin JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
- /* printk("\n 0 - i_APCI3200_GetChannelCalibrationValue data [6] = %lu, data [7] = %lu, data [8] = %lu", data [6], data [7], data [8]); */
- i_APCI3200_GetChannelCalibrationValue(dev,
- s_BoardInfos[dev->minor].ui_Channel_num,
- &data[6], &data[7], &data[8]);
- /* End JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
- }
- break;
- case 1:
-
- for (i = 0; i < insn->n; i++) {
- /* data[i]=ui_InterruptChannelValue[i]; */
- data[i] =
- s_BoardInfos[dev->minor].
- ui_InterruptChannelValue[i];
- }
-
- /* i_Count=0; */
- /* i_Sum=0; */
- /* if(i_ScanType==1) */
- s_BoardInfos[dev->minor].i_Count = 0;
- s_BoardInfos[dev->minor].i_Sum = 0;
- if (s_BoardInfos[dev->minor].i_ScanType == 1) {
- /* i_Initialised=0; */
- /* i_InterruptFlag=0; */
- s_BoardInfos[dev->minor].i_Initialised = 0;
- s_BoardInfos[dev->minor].i_InterruptFlag = 0;
- /* END JK 06.07.04: Management of sevrals boards */
- }
- break;
- default:
- printk("\nThe parameters passed are in error\n");
- i_APCI3200_Reset(dev);
- return -EINVAL;
- } /* switch(insn->unused[0]) */
-
- return insn->n;
-}
-
-/*
- +----------------------------------------------------------------------------+
- | Function Name : int i_APCI3200_Read1AnalogInputChannel |
- | (struct comedi_device *dev,struct comedi_subdevice *s, |
- | struct comedi_insn *insn,unsigned int *data) |
- +----------------------------------------------------------------------------+
- | Task : Read value of the selected channel |
- +----------------------------------------------------------------------------+
- | Input Parameters : struct comedi_device *dev : Driver handle |
- | unsigned int ui_NoOfChannel : Channel No to read |
- | unsigned int *data : Data Pointer to read status |
- +----------------------------------------------------------------------------+
- | Output Parameters : -- |
- | data[0] : Digital Value read |
- |
- +----------------------------------------------------------------------------+
- | Return Value : TRUE : No error occur |
- | : FALSE : Error occur. Return the error |
- | |
- +----------------------------------------------------------------------------+
-*/
-int i_APCI3200_Read1AnalogInputChannel(struct comedi_device *dev,
- struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
-{
- unsigned int ui_EOC = 0;
- unsigned int ui_ChannelNo = 0;
- unsigned int ui_CommandRegister = 0;
-
- /* BEGIN JK 06.07.04: Management of sevrals boards */
- /* ui_ChannelNo=i_ChannelNo; */
- ui_ChannelNo = s_BoardInfos[dev->minor].i_ChannelNo;
-
- /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
- while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
- 12) >> 19) & 1) != 1) ;
- /*********************************/
- /* Write the channel to configure */
- /*********************************/
- /* Begin JK 20.10.2004: Bad channel value is used when using differential mode */
- /* outl(0 | ui_Channel_num , devpriv->iobase+i_Offset + 0x4); */
- /* outl(0 | s_BoardInfos [dev->minor].ui_Channel_num , devpriv->iobase+s_BoardInfos [dev->minor].i_Offset + 0x4); */
- outl(0 | s_BoardInfos[dev->minor].i_ChannelNo,
- devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 0x4);
- /* End JK 20.10.2004: Bad channel value is used when using differential mode */
-
- /*******************************/
- /* Set the convert timing unit */
- /*******************************/
- /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
- while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
- 12) >> 19) & 1) != 1) ;
-
- /* outl(i_ADDIDATAConversionTimeUnit , devpriv->iobase+i_Offset + 36); */
- outl(s_BoardInfos[dev->minor].i_ADDIDATAConversionTimeUnit,
- devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 36);
-
- /**************************/
- /* Set the convert timing */
- /**************************/
- /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
- while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
- 12) >> 19) & 1) != 1) ;
-
- /* outl(i_ADDIDATAConversionTime , devpriv->iobase+i_Offset + 32); */
- outl(s_BoardInfos[dev->minor].i_ADDIDATAConversionTime,
- devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 32);
-
- /**************************************************************************/
- /* Set the start end stop index to the selected channel and set the start */
- /**************************************************************************/
-
- ui_CommandRegister = ui_ChannelNo | (ui_ChannelNo << 8) | 0x80000;
-
- /*********************************/
- /*Test if the interrupt is enable */
- /*********************************/
-
- /* if (i_InterruptFlag == ADDIDATA_ENABLE) */
- if (s_BoardInfos[dev->minor].i_InterruptFlag == ADDIDATA_ENABLE) {
- /************************/
- /* Enable the interrupt */
- /************************/
- ui_CommandRegister = ui_CommandRegister | 0x00100000;
- } /* if (i_InterruptFlag == ADDIDATA_ENABLE) */
-
- /******************************/
- /* Write the command register */
- /******************************/
- /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
- while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
- 12) >> 19) & 1) != 1) ;
-
- /* outl(ui_CommandRegister, devpriv->iobase+i_Offset + 8); */
- outl(ui_CommandRegister,
- devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 8);
-
- /*****************************/
- /*Test if interrupt is enable */
- /*****************************/
- /* if (i_InterruptFlag == ADDIDATA_DISABLE) */
- if (s_BoardInfos[dev->minor].i_InterruptFlag == ADDIDATA_DISABLE) {
- do {
- /*************************/
- /*Read the EOC Status bit */
- /*************************/
-
- /* ui_EOC = inl(devpriv->iobase+i_Offset + 20) & 1; */
- ui_EOC = inl(devpriv->iobase +
- s_BoardInfos[dev->minor].i_Offset + 20) & 1;
-
- } while (ui_EOC != 1);
-
- /***************************************/
- /* Read the digital value of the input */
- /***************************************/
-
- /* data[0] = inl (devpriv->iobase+i_Offset + 28); */
- data[0] =
- inl(devpriv->iobase +
- s_BoardInfos[dev->minor].i_Offset + 28);
- /* END JK 06.07.04: Management of sevrals boards */
-
- } /* if (i_InterruptFlag == ADDIDATA_DISABLE) */
- return 0;
-}
-
-/*
- +----------------------------------------------------------------------------+
- | Function Name : int i_APCI3200_ReadCalibrationOffsetValue |
- | (struct comedi_device *dev,struct comedi_subdevice *s, |
- | struct comedi_insn *insn,unsigned int *data) |
- +----------------------------------------------------------------------------+
- | Task : Read calibration offset value of the selected channel|
- +----------------------------------------------------------------------------+
- | Input Parameters : struct comedi_device *dev : Driver handle |
- | unsigned int *data : Data Pointer to read status |
- +----------------------------------------------------------------------------+
- | Output Parameters : -- |
- | data[0] : Calibration offset Value |
- |
- +----------------------------------------------------------------------------+
- | Return Value : TRUE : No error occur |
- | : FALSE : Error occur. Return the error |
- | |
- +----------------------------------------------------------------------------+
-*/
-int i_APCI3200_ReadCalibrationOffsetValue(struct comedi_device *dev, unsigned int *data)
-{
- unsigned int ui_Temp = 0, ui_EOC = 0;
- unsigned int ui_CommandRegister = 0;
-
- /* BEGIN JK 06.07.04: Management of sevrals boards */
- /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
- while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
- 12) >> 19) & 1) != 1) ;
- /*********************************/
- /* Write the channel to configure */
- /*********************************/
- /* Begin JK 20.10.2004: This seems not necessary ! */
- /* outl(0 | ui_Channel_num , devpriv->iobase+i_Offset + 0x4); */
- /* outl(0 | s_BoardInfos [dev->minor].ui_Channel_num , devpriv->iobase+s_BoardInfos [dev->minor].i_Offset + 0x4); */
- /* End JK 20.10.2004: This seems not necessary ! */
-
- /*******************************/
- /* Set the convert timing unit */
- /*******************************/
- /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
- while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
- 12) >> 19) & 1) != 1) ;
- /* outl(i_ADDIDATAConversionTimeUnit , devpriv->iobase+i_Offset + 36); */
- outl(s_BoardInfos[dev->minor].i_ADDIDATAConversionTimeUnit,
- devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 36);
- /**************************/
- /* Set the convert timing */
- /**************************/
- /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
- while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
- 12) >> 19) & 1) != 1) ;
- /* outl(i_ADDIDATAConversionTime , devpriv->iobase+i_Offset + 32); */
- outl(s_BoardInfos[dev->minor].i_ADDIDATAConversionTime,
- devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 32);
- /*****************************/
- /*Read the calibration offset */
- /*****************************/
- /* ui_Temp = inl(devpriv->iobase+i_Offset + 12); */
- ui_Temp = inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12);
-
- /*********************************/
- /*Configure the Offset Conversion */
- /*********************************/
- /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
- while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
- 12) >> 19) & 1) != 1) ;
- /* outl((ui_Temp | 0x00020000), devpriv->iobase+i_Offset + 12); */
- outl((ui_Temp | 0x00020000),
- devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12);
- /*******************************/
- /*Initialise ui_CommandRegister */
- /*******************************/
-
- ui_CommandRegister = 0;
-
- /*********************************/
- /*Test if the interrupt is enable */
- /*********************************/
-
- /* if (i_InterruptFlag == ADDIDATA_ENABLE) */
- if (s_BoardInfos[dev->minor].i_InterruptFlag == ADDIDATA_ENABLE) {
-
- /**********************/
- /*Enable the interrupt */
- /**********************/
-
- ui_CommandRegister = ui_CommandRegister | 0x00100000;
-
- } /* if (i_InterruptFlag == ADDIDATA_ENABLE) */
-
- /**********************/
- /*Start the conversion */
- /**********************/
- ui_CommandRegister = ui_CommandRegister | 0x00080000;
-
- /***************************/
- /*Write the command regiter */
- /***************************/
- /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
- while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
- 12) >> 19) & 1) != 1) ;
- /* outl(ui_CommandRegister, devpriv->iobase+i_Offset + 8); */
- outl(ui_CommandRegister,
- devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 8);
-
- /*****************************/
- /*Test if interrupt is enable */
- /*****************************/
-
- /* if (i_InterruptFlag == ADDIDATA_DISABLE) */
- if (s_BoardInfos[dev->minor].i_InterruptFlag == ADDIDATA_DISABLE) {
-
- do {
- /*******************/
- /*Read the EOC flag */
- /*******************/
-
- /* ui_EOC = inl (devpriv->iobase+i_Offset + 20) & 1; */
- ui_EOC = inl(devpriv->iobase +
- s_BoardInfos[dev->minor].i_Offset + 20) & 1;
-
- } while (ui_EOC != 1);
-
- /**************************************************/
- /*Read the digital value of the calibration Offset */
- /**************************************************/
-
- /* data[0] = inl(devpriv->iobase+i_Offset+ 28); */
- data[0] =
- inl(devpriv->iobase +
- s_BoardInfos[dev->minor].i_Offset + 28);
- } /* if (i_InterruptFlag == ADDIDATA_DISABLE) */
- return 0;
-}
-
-/*
- +----------------------------------------------------------------------------+
- | Function Name : int i_APCI3200_ReadCalibrationGainValue |
- | (struct comedi_device *dev,struct comedi_subdevice *s, |
- | struct comedi_insn *insn,unsigned int *data) |
- +----------------------------------------------------------------------------+
- | Task : Read calibration gain value of the selected channel |
- +----------------------------------------------------------------------------+
- | Input Parameters : struct comedi_device *dev : Driver handle |
- | unsigned int *data : Data Pointer to read status |
- +----------------------------------------------------------------------------+
- | Output Parameters : -- |
- | data[0] : Calibration gain Value Of Input |
- |
- +----------------------------------------------------------------------------+
- | Return Value : TRUE : No error occur |
- | : FALSE : Error occur. Return the error |
- | |
- +----------------------------------------------------------------------------+
-*/
-int i_APCI3200_ReadCalibrationGainValue(struct comedi_device *dev, unsigned int *data)
-{
- unsigned int ui_EOC = 0;
- int ui_CommandRegister = 0;
-
- /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
- while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
- 12) >> 19) & 1) != 1) ;
- /*********************************/
- /* Write the channel to configure */
- /*********************************/
- /* Begin JK 20.10.2004: This seems not necessary ! */
- /* outl(0 | ui_Channel_num , devpriv->iobase+i_Offset + 0x4); */
- /* outl(0 | s_BoardInfos [dev->minor].ui_Channel_num , devpriv->iobase+s_BoardInfos [dev->minor].i_Offset + 0x4); */
- /* End JK 20.10.2004: This seems not necessary ! */
-
- /***************************/
- /*Read the calibration gain */
- /***************************/
- /*******************************/
- /* Set the convert timing unit */
- /*******************************/
- /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
- while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
- 12) >> 19) & 1) != 1) ;
- /* outl(i_ADDIDATAConversionTimeUnit , devpriv->iobase+i_Offset + 36); */
- outl(s_BoardInfos[dev->minor].i_ADDIDATAConversionTimeUnit,
- devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 36);
- /**************************/
- /* Set the convert timing */
- /**************************/
- /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
- while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
- 12) >> 19) & 1) != 1) ;
- /* outl(i_ADDIDATAConversionTime , devpriv->iobase+i_Offset + 32); */
- outl(s_BoardInfos[dev->minor].i_ADDIDATAConversionTime,
- devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 32);
- /*******************************/
- /*Configure the Gain Conversion */
- /*******************************/
- /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
- while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
- 12) >> 19) & 1) != 1) ;
- /* outl(0x00040000 , devpriv->iobase+i_Offset + 12); */
- outl(0x00040000,
- devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12);
-
- /*******************************/
- /*Initialise ui_CommandRegister */
- /*******************************/
-
- ui_CommandRegister = 0;
-
- /*********************************/
- /*Test if the interrupt is enable */
- /*********************************/
-
- /* if (i_InterruptFlag == ADDIDATA_ENABLE) */
- if (s_BoardInfos[dev->minor].i_InterruptFlag == ADDIDATA_ENABLE) {
-
- /**********************/
- /*Enable the interrupt */
- /**********************/
-
- ui_CommandRegister = ui_CommandRegister | 0x00100000;
-
- } /* if (i_InterruptFlag == ADDIDATA_ENABLE) */
-
- /**********************/
- /*Start the conversion */
- /**********************/
-
- ui_CommandRegister = ui_CommandRegister | 0x00080000;
- /***************************/
- /*Write the command regiter */
- /***************************/
- /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
- while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
- 12) >> 19) & 1) != 1) ;
- /* outl(ui_CommandRegister , devpriv->iobase+i_Offset + 8); */
- outl(ui_CommandRegister,
- devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 8);
-
- /*****************************/
- /*Test if interrupt is enable */
- /*****************************/
-
- /* if (i_InterruptFlag == ADDIDATA_DISABLE) */
- if (s_BoardInfos[dev->minor].i_InterruptFlag == ADDIDATA_DISABLE) {
-
- do {
-
- /*******************/
- /*Read the EOC flag */
- /*******************/
-
- /* ui_EOC = inl(devpriv->iobase+i_Offset + 20) & 1; */
- ui_EOC = inl(devpriv->iobase +
- s_BoardInfos[dev->minor].i_Offset + 20) & 1;
-
- } while (ui_EOC != 1);
-
- /************************************************/
- /*Read the digital value of the calibration Gain */
- /************************************************/
-
- /* data[0] = inl(devpriv->iobase+i_Offset + 28); */
- data[0] =
- inl(devpriv->iobase +
- s_BoardInfos[dev->minor].i_Offset + 28);
-
- } /* if (i_InterruptFlag == ADDIDATA_DISABLE) */
- return 0;
-}
-
-/*
- +----------------------------------------------------------------------------+
- | Function Name : int i_APCI3200_ReadCJCValue |
- | (struct comedi_device *dev,struct comedi_subdevice *s, |
- | struct comedi_insn *insn,unsigned int *data) |
- +----------------------------------------------------------------------------+
- | Task : Read CJC value of the selected channel |
- +----------------------------------------------------------------------------+
- | Input Parameters : struct comedi_device *dev : Driver handle |
- | unsigned int *data : Data Pointer to read status |
- +----------------------------------------------------------------------------+
- | Output Parameters : -- |
- | data[0] : CJC Value |
- |
- +----------------------------------------------------------------------------+
- | Return Value : TRUE : No error occur |
- | : FALSE : Error occur. Return the error |
- | |
- +----------------------------------------------------------------------------+
-*/
-
-int i_APCI3200_ReadCJCValue(struct comedi_device *dev, unsigned int *data)
-{
- unsigned int ui_EOC = 0;
- int ui_CommandRegister = 0;
-
- /******************************/
- /*Set the converting time unit */
- /******************************/
-
- /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
- while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
- 12) >> 19) & 1) != 1) ;
-
- /* outl(i_ADDIDATAConversionTimeUnit , devpriv->iobase+i_Offset + 36); */
- outl(s_BoardInfos[dev->minor].i_ADDIDATAConversionTimeUnit,
- devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 36);
- /**************************/
- /* Set the convert timing */
- /**************************/
- /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
- while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
- 12) >> 19) & 1) != 1) ;
-
- /* outl(i_ADDIDATAConversionTime , devpriv->iobase+i_Offset + 32); */
- outl(s_BoardInfos[dev->minor].i_ADDIDATAConversionTime,
- devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 32);
-
- /******************************/
- /*Configure the CJC Conversion */
- /******************************/
- /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
- while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
- 12) >> 19) & 1) != 1) ;
-
- /* outl( 0x00000400 , devpriv->iobase+i_Offset + 4); */
- outl(0x00000400,
- devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 4);
- /*******************************/
- /*Initialise dw_CommandRegister */
- /*******************************/
- ui_CommandRegister = 0;
- /*********************************/
- /*Test if the interrupt is enable */
- /*********************************/
- /* if (i_InterruptFlag == ADDIDATA_ENABLE) */
- if (s_BoardInfos[dev->minor].i_InterruptFlag == ADDIDATA_ENABLE) {
- /**********************/
- /*Enable the interrupt */
- /**********************/
- ui_CommandRegister = ui_CommandRegister | 0x00100000;
- }
-
- /**********************/
- /*Start the conversion */
- /**********************/
-
- ui_CommandRegister = ui_CommandRegister | 0x00080000;
-
- /***************************/
- /*Write the command regiter */
- /***************************/
- /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
- while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
- 12) >> 19) & 1) != 1) ;
- /* outl(ui_CommandRegister , devpriv->iobase+i_Offset + 8); */
- outl(ui_CommandRegister,
- devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 8);
-
- /*****************************/
- /*Test if interrupt is enable */
- /*****************************/
-
- /* if (i_InterruptFlag == ADDIDATA_DISABLE) */
- if (s_BoardInfos[dev->minor].i_InterruptFlag == ADDIDATA_DISABLE) {
- do {
-
- /*******************/
- /*Read the EOC flag */
- /*******************/
-
- /* ui_EOC = inl(devpriv->iobase+i_Offset + 20) & 1; */
- ui_EOC = inl(devpriv->iobase +
- s_BoardInfos[dev->minor].i_Offset + 20) & 1;
-
- } while (ui_EOC != 1);
-
- /***********************************/
- /*Read the digital value of the CJC */
- /***********************************/
-
- /* data[0] = inl(devpriv->iobase+i_Offset + 28); */
- data[0] =
- inl(devpriv->iobase +
- s_BoardInfos[dev->minor].i_Offset + 28);
-
- } /* if (i_InterruptFlag == ADDIDATA_DISABLE) */
- return 0;
-}
-
-/*
- +----------------------------------------------------------------------------+
- | Function Name : int i_APCI3200_ReadCJCCalOffset |
- | (struct comedi_device *dev,struct comedi_subdevice *s, |
- | struct comedi_insn *insn,unsigned int *data) |
- +----------------------------------------------------------------------------+
- | Task : Read CJC calibration offset value of the selected channel
- +----------------------------------------------------------------------------+
- | Input Parameters : struct comedi_device *dev : Driver handle |
- | unsigned int *data : Data Pointer to read status |
- +----------------------------------------------------------------------------+
- | Output Parameters : -- |
- | data[0] : CJC calibration offset Value
- |
- +----------------------------------------------------------------------------+
- | Return Value : TRUE : No error occur |
- | : FALSE : Error occur. Return the error |
- | |
- +----------------------------------------------------------------------------+
-*/
-int i_APCI3200_ReadCJCCalOffset(struct comedi_device *dev, unsigned int *data)
-{
- unsigned int ui_EOC = 0;
- int ui_CommandRegister = 0;
- /*******************************************/
- /*Read calibration offset value for the CJC */
- /*******************************************/
- /*******************************/
- /* Set the convert timing unit */
- /*******************************/
- /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
- while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
- 12) >> 19) & 1) != 1) ;
- /* outl(i_ADDIDATAConversionTimeUnit , devpriv->iobase+i_Offset + 36); */
- outl(s_BoardInfos[dev->minor].i_ADDIDATAConversionTimeUnit,
- devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 36);
- /**************************/
- /* Set the convert timing */
- /**************************/
- /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
- while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
- 12) >> 19) & 1) != 1) ;
- /* outl(i_ADDIDATAConversionTime , devpriv->iobase+i_Offset + 32); */
- outl(s_BoardInfos[dev->minor].i_ADDIDATAConversionTime,
- devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 32);
- /******************************/
- /*Configure the CJC Conversion */
- /******************************/
- /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
- while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
- 12) >> 19) & 1) != 1) ;
- /* outl(0x00000400 , devpriv->iobase+i_Offset + 4); */
- outl(0x00000400,
- devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 4);
- /*********************************/
- /*Configure the Offset Conversion */
- /*********************************/
- /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
- while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
- 12) >> 19) & 1) != 1) ;
- /* outl(0x00020000, devpriv->iobase+i_Offset + 12); */
- outl(0x00020000,
- devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12);
- /*******************************/
- /*Initialise ui_CommandRegister */
- /*******************************/
- ui_CommandRegister = 0;
- /*********************************/
- /*Test if the interrupt is enable */
- /*********************************/
-
- /* if (i_InterruptFlag == ADDIDATA_ENABLE) */
- if (s_BoardInfos[dev->minor].i_InterruptFlag == ADDIDATA_ENABLE) {
- /**********************/
- /*Enable the interrupt */
- /**********************/
- ui_CommandRegister = ui_CommandRegister | 0x00100000;
-
- }
-
- /**********************/
- /*Start the conversion */
- /**********************/
- ui_CommandRegister = ui_CommandRegister | 0x00080000;
- /***************************/
- /*Write the command regiter */
- /***************************/
- /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
- while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
- 12) >> 19) & 1) != 1) ;
- /* outl(ui_CommandRegister,devpriv->iobase+i_Offset + 8); */
- outl(ui_CommandRegister,
- devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 8);
- /* if (i_InterruptFlag == ADDIDATA_DISABLE) */
- if (s_BoardInfos[dev->minor].i_InterruptFlag == ADDIDATA_DISABLE) {
- do {
- /*******************/
- /*Read the EOC flag */
- /*******************/
- /* ui_EOC = inl(devpriv->iobase+i_Offset + 20) & 1; */
- ui_EOC = inl(devpriv->iobase +
- s_BoardInfos[dev->minor].i_Offset + 20) & 1;
- } while (ui_EOC != 1);
-
- /**************************************************/
- /*Read the digital value of the calibration Offset */
- /**************************************************/
- /* data[0] = inl(devpriv->iobase+i_Offset + 28); */
- data[0] =
- inl(devpriv->iobase +
- s_BoardInfos[dev->minor].i_Offset + 28);
- } /* if (i_InterruptFlag == ADDIDATA_DISABLE) */
- return 0;
-}
-
-/*
- +----------------------------------------------------------------------------+
- | Function Name : int i_APCI3200_ReadCJCGainValue |
- | (struct comedi_device *dev,struct comedi_subdevice *s, |
- | struct comedi_insn *insn,unsigned int *data) |
- +----------------------------------------------------------------------------+
- | Task : Read CJC calibration gain value
- +----------------------------------------------------------------------------+
- | Input Parameters : struct comedi_device *dev : Driver handle |
- | unsigned int ui_NoOfChannels : No Of Channels To read |
- | unsigned int *data : Data Pointer to read status |
- +----------------------------------------------------------------------------+
- | Output Parameters : -- |
- | data[0] : CJC calibration gain value
- |
- +----------------------------------------------------------------------------+
- | Return Value : TRUE : No error occur |
- | : FALSE : Error occur. Return the error |
- | |
- +----------------------------------------------------------------------------+
-*/
-int i_APCI3200_ReadCJCCalGain(struct comedi_device *dev, unsigned int *data)
-{
- unsigned int ui_EOC = 0;
- int ui_CommandRegister = 0;
- /*******************************/
- /* Set the convert timing unit */
- /*******************************/
- /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
- while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
- 12) >> 19) & 1) != 1) ;
- /* outl(i_ADDIDATAConversionTimeUnit , devpriv->iobase+i_Offset + 36); */
- outl(s_BoardInfos[dev->minor].i_ADDIDATAConversionTimeUnit,
- devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 36);
- /**************************/
- /* Set the convert timing */
- /**************************/
- /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
- while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
- 12) >> 19) & 1) != 1) ;
- /* outl(i_ADDIDATAConversionTime , devpriv->iobase+i_Offset + 32); */
- outl(s_BoardInfos[dev->minor].i_ADDIDATAConversionTime,
- devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 32);
- /******************************/
- /*Configure the CJC Conversion */
- /******************************/
- /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
- while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
- 12) >> 19) & 1) != 1) ;
- /* outl(0x00000400,devpriv->iobase+i_Offset + 4); */
- outl(0x00000400,
- devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 4);
- /*******************************/
- /*Configure the Gain Conversion */
- /*******************************/
- /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
- while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
- 12) >> 19) & 1) != 1) ;
- /* outl(0x00040000,devpriv->iobase+i_Offset + 12); */
- outl(0x00040000,
- devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12);
-
- /*******************************/
- /*Initialise dw_CommandRegister */
- /*******************************/
- ui_CommandRegister = 0;
- /*********************************/
- /*Test if the interrupt is enable */
- /*********************************/
- /* if (i_InterruptFlag == ADDIDATA_ENABLE) */
- if (s_BoardInfos[dev->minor].i_InterruptFlag == ADDIDATA_ENABLE) {
- /**********************/
- /*Enable the interrupt */
- /**********************/
- ui_CommandRegister = ui_CommandRegister | 0x00100000;
- }
- /**********************/
- /*Start the conversion */
- /**********************/
- ui_CommandRegister = ui_CommandRegister | 0x00080000;
- /***************************/
- /*Write the command regiter */
- /***************************/
- /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
- while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
- 12) >> 19) & 1) != 1) ;
- /* outl(ui_CommandRegister ,devpriv->iobase+i_Offset + 8); */
- outl(ui_CommandRegister,
- devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 8);
- /* if (i_InterruptFlag == ADDIDATA_DISABLE) */
- if (s_BoardInfos[dev->minor].i_InterruptFlag == ADDIDATA_DISABLE) {
- do {
- /*******************/
- /*Read the EOC flag */
- /*******************/
- /* ui_EOC = inl(devpriv->iobase+i_Offset + 20) & 1; */
- ui_EOC = inl(devpriv->iobase +
- s_BoardInfos[dev->minor].i_Offset + 20) & 1;
- } while (ui_EOC != 1);
- /************************************************/
- /*Read the digital value of the calibration Gain */
- /************************************************/
- /* data[0] = inl (devpriv->iobase+i_Offset + 28); */
- data[0] =
- inl(devpriv->iobase +
- s_BoardInfos[dev->minor].i_Offset + 28);
- } /* if (i_InterruptFlag == ADDIDATA_DISABLE) */
- return 0;
-}
-
-/*
- +----------------------------------------------------------------------------+
- | Function Name : int i_APCI3200_InsnBits_AnalogInput_Test |
- | (struct comedi_device *dev,struct comedi_subdevice *s, |
- | struct comedi_insn *insn,unsigned int *data) |
- +----------------------------------------------------------------------------+
- | Task : Tests the Selected Anlog Input Channel |
- +----------------------------------------------------------------------------+
- | Input Parameters : struct comedi_device *dev : Driver handle |
- | struct comedi_subdevice *s : Subdevice Pointer |
- | struct comedi_insn *insn : Insn Structure Pointer |
- | unsigned int *data : Data Pointer contains |
- | configuration parameters as below |
- |
- |
- | data[0] : 0 TestAnalogInputShortCircuit
- | 1 TestAnalogInputConnection |
-
- +----------------------------------------------------------------------------+
- | Output Parameters : -- |
- | data[0] : Digital value obtained |
- | data[1] : calibration offset |
- | data[2] : calibration gain |
- | |
- | |
- +----------------------------------------------------------------------------+
- | Return Value : TRUE : No error occur |
- | : FALSE : Error occur. Return the error |
- | |
- +----------------------------------------------------------------------------+
-*/
-
-int i_APCI3200_InsnBits_AnalogInput_Test(struct comedi_device *dev,
- struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
-{
+ struct addi_private *devpriv = dev->private;
unsigned int ui_Configuration = 0;
int i_Temp; /* ,i_TimeUnit; */
+
/* if(i_Initialised==0) */
if (s_BoardInfos[dev->minor].i_Initialised == 0) {
@@ -2502,61 +2211,18 @@
return insn->n;
}
-/*
- +----------------------------------------------------------------------------+
- | Function Name : int i_APCI3200_InsnWriteReleaseAnalogInput |
- | (struct comedi_device *dev,struct comedi_subdevice *s, |
- | struct comedi_insn *insn,unsigned int *data) |
- +----------------------------------------------------------------------------+
- | Task : Resets the channels |
- +----------------------------------------------------------------------------+
- | Input Parameters : struct comedi_device *dev : Driver handle |
- | struct comedi_subdevice *s : Subdevice Pointer |
- | struct comedi_insn *insn : Insn Structure Pointer |
- | unsigned int *data : Data Pointer
- +----------------------------------------------------------------------------+
- | Output Parameters : -- |
-
- +----------------------------------------------------------------------------+
- | Return Value : TRUE : No error occur |
- | : FALSE : Error occur. Return the error |
- | |
- +----------------------------------------------------------------------------+
-*/
-
-int i_APCI3200_InsnWriteReleaseAnalogInput(struct comedi_device *dev,
- struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
+static int i_APCI3200_InsnWriteReleaseAnalogInput(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
{
i_APCI3200_Reset(dev);
return insn->n;
}
-/*
- +----------------------------------------------------------------------------+
- | Function name :int i_APCI3200_CommandTestAnalogInput(struct comedi_device *dev|
- | ,struct comedi_subdevice *s,struct comedi_cmd *cmd) |
- | |
- +----------------------------------------------------------------------------+
- | Task : Test validity for a command for cyclic anlog input |
- | acquisition |
- | |
- +----------------------------------------------------------------------------+
- | Input Parameters : struct comedi_device *dev |
- | struct comedi_subdevice *s |
- | struct comedi_cmd *cmd |
- | |
- |
- | |
- | |
- | |
- +----------------------------------------------------------------------------+
- | Return Value :0 |
- | |
- +----------------------------------------------------------------------------+
-*/
-
-int i_APCI3200_CommandTestAnalogInput(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_cmd *cmd)
+static int i_APCI3200_CommandTestAnalogInput(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_cmd *cmd)
{
int err = 0;
@@ -2716,27 +2382,12 @@
return 0;
}
-/*
- +----------------------------------------------------------------------------+
- | Function name :int i_APCI3200_StopCyclicAcquisition(struct comedi_device *dev,|
- | struct comedi_subdevice *s)|
- | |
- +----------------------------------------------------------------------------+
- | Task : Stop the acquisition |
- | |
- +----------------------------------------------------------------------------+
- | Input Parameters : struct comedi_device *dev |
- | struct comedi_subdevice *s |
- | |
- +----------------------------------------------------------------------------+
- | Return Value :0 |
- | |
- +----------------------------------------------------------------------------+
-*/
-
-int i_APCI3200_StopCyclicAcquisition(struct comedi_device *dev, struct comedi_subdevice *s)
+static int i_APCI3200_StopCyclicAcquisition(struct comedi_device *dev,
+ struct comedi_subdevice *s)
{
+ struct addi_private *devpriv = dev->private;
unsigned int ui_Configuration = 0;
+
/* i_InterruptFlag=0; */
/* i_Initialised=0; */
/* i_Count=0; */
@@ -2765,27 +2416,13 @@
}
/*
- +----------------------------------------------------------------------------+
- | Function name : int i_APCI3200_CommandAnalogInput(struct comedi_device *dev, |
- | struct comedi_subdevice *s) |
- | |
- +----------------------------------------------------------------------------+
- | Task : Does asynchronous acquisition |
- | Determines the mode 1 or 2. |
- | |
- +----------------------------------------------------------------------------+
- | Input Parameters : struct comedi_device *dev |
- | struct comedi_subdevice *s |
- | |
- | |
- +----------------------------------------------------------------------------+
- | Return Value : |
- | |
- +----------------------------------------------------------------------------+
-*/
-
-int i_APCI3200_CommandAnalogInput(struct comedi_device *dev, struct comedi_subdevice *s)
+ * Does asynchronous acquisition
+ * Determines the mode 1 or 2.
+ */
+static int i_APCI3200_CommandAnalogInput(struct comedi_device *dev,
+ struct comedi_subdevice *s)
{
+ struct addi_private *devpriv = dev->private;
struct comedi_cmd *cmd = &s->async->cmd;
unsigned int ui_Configuration = 0;
/* INT i_CurrentSource = 0; */
@@ -2798,6 +2435,7 @@
unsigned int ui_DelayTime = 0;
unsigned int ui_DelayTimeBase = 0;
unsigned int ui_DelayMode = 0;
+
/* i_FirstChannel=cmd->chanlist[0]; */
/* i_LastChannel=cmd->chanlist[1]; */
s_BoardInfos[dev->minor].i_FirstChannel = cmd->chanlist[0];
@@ -2956,80 +2594,155 @@
}
/*
- +----------------------------------------------------------------------------+
- | Function Name : int i_APCI3200_Reset(struct comedi_device *dev) |
- | |
- +----------------------------------------------------------------------------+
- | Task :Resets the registers of the card |
- +----------------------------------------------------------------------------+
- | Input Parameters : |
- +----------------------------------------------------------------------------+
- | Output Parameters : -- |
- +----------------------------------------------------------------------------+
- | Return Value : |
- | |
- +----------------------------------------------------------------------------+
-*/
-
-int i_APCI3200_Reset(struct comedi_device *dev)
+ * This function copies the acquired data(from FIFO) to Comedi buffer.
+ */
+static int i_APCI3200_InterruptHandleEos(struct comedi_device *dev)
{
- int i_Temp;
- unsigned int dw_Dummy;
+ struct addi_private *devpriv = dev->private;
+ unsigned int ui_StatusRegister = 0;
+ struct comedi_subdevice *s = &dev->subdevices[0];
+
+ /* BEGIN JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */
+ /* comedi_async *async = s->async; */
+ /* UINT *data; */
+ /* data=async->data+async->buf_int_ptr;//new samples added from here onwards */
+ int n = 0, i = 0;
+ /* END JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */
+
+ /************************************/
+ /*Read the interrupt status register */
+ /************************************/
+ /* ui_StatusRegister = inl(devpriv->iobase+i_Offset + 16); */
+ ui_StatusRegister =
+ inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 16);
+
+ /*************************/
+ /*Test if interrupt occur */
+ /*************************/
+
+ if ((ui_StatusRegister & 0x2) == 0x2) {
+ /*************************/
+ /*Read the channel number */
+ /*************************/
+ /* ui_ChannelNumber = inl(devpriv->iobase+i_Offset + 24); */
+ /* BEGIN JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */
+ /* This value is not used */
+ /* ui_ChannelNumber = inl(devpriv->iobase+s_BoardInfos [dev->minor].i_Offset + 24); */
+ s->async->events = 0;
+ /* END JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */
+
+ /*************************************/
+ /*Read the digital Analog Input value */
+ /*************************************/
+
+ /* data[i_Count] = inl(devpriv->iobase+i_Offset + 28); */
+ /* Begin JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */
+ /* data[s_BoardInfos [dev->minor].i_Count] = inl(devpriv->iobase+s_BoardInfos [dev->minor].i_Offset + 28); */
+ s_BoardInfos[dev->minor].ui_ScanValueArray[s_BoardInfos[dev->
+ minor].i_Count] =
+ inl(devpriv->iobase +
+ s_BoardInfos[dev->minor].i_Offset + 28);
+ /* End JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */
+
+ /* if((i_Count == (i_LastChannel-i_FirstChannel+3))) */
+ if ((s_BoardInfos[dev->minor].i_Count ==
+ (s_BoardInfos[dev->minor].i_LastChannel -
+ s_BoardInfos[dev->minor].
+ i_FirstChannel + 3))) {
+
+ /* Begin JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
+ s_BoardInfos[dev->minor].i_Count++;
+
+ for (i = s_BoardInfos[dev->minor].i_FirstChannel;
+ i <= s_BoardInfos[dev->minor].i_LastChannel;
+ i++) {
+ i_APCI3200_GetChannelCalibrationValue(dev, i,
+ &s_BoardInfos[dev->minor].
+ ui_ScanValueArray[s_BoardInfos[dev->
+ minor].i_Count + ((i -
+ s_BoardInfos
+ [dev->minor].
+ i_FirstChannel)
+ * 3)],
+ &s_BoardInfos[dev->minor].
+ ui_ScanValueArray[s_BoardInfos[dev->
+ minor].i_Count + ((i -
+ s_BoardInfos
+ [dev->minor].
+ i_FirstChannel)
+ * 3) + 1],
+ &s_BoardInfos[dev->minor].
+ ui_ScanValueArray[s_BoardInfos[dev->
+ minor].i_Count + ((i -
+ s_BoardInfos
+ [dev->minor].
+ i_FirstChannel)
+ * 3) + 2]);
+ }
+
+ /* End JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
+
+ /* i_Count=-1; */
+
+ s_BoardInfos[dev->minor].i_Count = -1;
+
+ /* async->buf_int_count+=(i_LastChannel-i_FirstChannel+4)*sizeof(unsigned int); */
+ /* Begin JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */
+ /* async->buf_int_count+=(s_BoardInfos [dev->minor].i_LastChannel-s_BoardInfos [dev->minor].i_FirstChannel+4)*sizeof(unsigned int); */
+ /* End JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */
+ /* async->buf_int_ptr+=(i_LastChannel-i_FirstChannel+4)*sizeof(unsigned int); */
+ /* Begin JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */
+ /* async->buf_int_ptr+=(s_BoardInfos [dev->minor].i_LastChannel-s_BoardInfos [dev->minor].i_FirstChannel+4)*sizeof(unsigned int); */
+ /* comedi_eos(dev,s); */
+
+ /* Set the event type (Comedi Buffer End Of Scan) */
+ s->async->events |= COMEDI_CB_EOS;
+
+ /* Test if enougth memory is available and allocate it for 7 values */
+ /* n = comedi_buf_write_alloc(s->async, 7*sizeof(unsigned int)); */
+ n = comedi_buf_write_alloc(s->async,
+ (7 + 12) * sizeof(unsigned int));
+
+ /* If not enough memory available, event is set to Comedi Buffer Error */
+ if (n > ((7 + 12) * sizeof(unsigned int))) {
+ printk("\ncomedi_buf_write_alloc n = %i", n);
+ s->async->events |= COMEDI_CB_ERROR;
+ }
+ /* Write all 7 scan values in the comedi buffer */
+ comedi_buf_memcpy_to(s->async, 0,
+ (unsigned int *) s_BoardInfos[dev->minor].
+ ui_ScanValueArray, (7 + 12) * sizeof(unsigned int));
+
+ /* Update comedi buffer pinters indexes */
+ comedi_buf_write_free(s->async,
+ (7 + 12) * sizeof(unsigned int));
+
+ /* Send events */
+ comedi_event(dev, s);
+ /* End JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */
+
+ /* BEGIN JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */
+ /* */
+ /* if (s->async->buf_int_ptr>=s->async->data_len) // for buffer rool over */
+ /* { */
+ /* /* buffer rollover */ */
+ /* s->async->buf_int_ptr=0; */
+ /* comedi_eobuf(dev,s); */
+ /* } */
+ /* End JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */
+ }
+ /* i_Count++; */
+ s_BoardInfos[dev->minor].i_Count++;
+ }
/* i_InterruptFlag=0; */
- /* i_Initialised==0; */
- /* i_Count=0; */
- /* i_Sum=0; */
-
s_BoardInfos[dev->minor].i_InterruptFlag = 0;
- s_BoardInfos[dev->minor].i_Initialised = 0;
- s_BoardInfos[dev->minor].i_Count = 0;
- s_BoardInfos[dev->minor].i_Sum = 0;
- s_BoardInfos[dev->minor].b_StructInitialized = 0;
-
- outl(0x83838383, devpriv->i_IobaseAmcc + 0x60);
-
- /* Enable the interrupt for the controller */
- dw_Dummy = inl(devpriv->i_IobaseAmcc + 0x38);
- outl(dw_Dummy | 0x2000, devpriv->i_IobaseAmcc + 0x38);
- outl(0, devpriv->i_IobaseAddon); /* Resets the output */
- /***************/
- /*Empty the buffer */
- /**************/
- for (i_Temp = 0; i_Temp <= 95; i_Temp++) {
- /* ui_InterruptChannelValue[i_Temp]=0; */
- s_BoardInfos[dev->minor].ui_InterruptChannelValue[i_Temp] = 0;
- } /* for(i_Temp=0;i_Temp<=95;i_Temp++) */
- /*****************************/
- /*Reset the START and IRQ bit */
- /*****************************/
- for (i_Temp = 0; i_Temp <= 192;) {
- while (((inl(devpriv->iobase + i_Temp + 12) >> 19) & 1) != 1) ;
- outl(0, devpriv->iobase + i_Temp + 8);
- i_Temp = i_Temp + 64;
- } /* for(i_Temp=0;i_Temp<=192;i_Temp+64) */
return 0;
}
-/*
- +----------------------------------------------------------------------------+
- | Function Name : static void v_APCI3200_Interrupt |
- | (int irq , void *d) |
- +----------------------------------------------------------------------------+
- | Task : Interrupt processing Routine |
- +----------------------------------------------------------------------------+
- | Input Parameters : int irq : irq number |
- | void *d : void pointer |
- +----------------------------------------------------------------------------+
- | Output Parameters : -- |
- +----------------------------------------------------------------------------+
- | Return Value : TRUE : No error occur |
- | : FALSE : Error occur. Return the error |
- | |
- +----------------------------------------------------------------------------+
-*/
-void v_APCI3200_Interrupt(int irq, void *d)
+static void v_APCI3200_Interrupt(int irq, void *d)
{
struct comedi_device *dev = d;
+ struct addi_private *devpriv = dev->private;
unsigned int ui_StatusRegister = 0;
unsigned int ui_ChannelNumber = 0;
int i_CalibrationFlag = 0;
@@ -3038,7 +2751,6 @@
unsigned int ui_DigitalTemperature = 0;
unsigned int ui_DigitalInput = 0;
int i_ConvertCJCCalibration;
-
/* BEGIN JK TEST */
int i_ReturnValue = 0;
/* END JK TEST */
@@ -3449,164 +3161,3 @@
} /* switch(i_ScanType) */
return;
}
-
-/*
- +----------------------------------------------------------------------------+
- | Function name :int i_APCI3200_InterruptHandleEos(struct comedi_device *dev) |
- | |
- | |
- +----------------------------------------------------------------------------+
- | Task : . |
- | This function copies the acquired data(from FIFO) |
- | to Comedi buffer. |
- | |
- +----------------------------------------------------------------------------+
- | Input Parameters : struct comedi_device *dev |
- | |
- | |
- +----------------------------------------------------------------------------+
- | Return Value : 0 |
- | |
- +----------------------------------------------------------------------------+
-*/
-int i_APCI3200_InterruptHandleEos(struct comedi_device *dev)
-{
- unsigned int ui_StatusRegister = 0;
- struct comedi_subdevice *s = &dev->subdevices[0];
-
- /* BEGIN JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */
- /* comedi_async *async = s->async; */
- /* UINT *data; */
- /* data=async->data+async->buf_int_ptr;//new samples added from here onwards */
- int n = 0, i = 0;
- /* END JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */
-
- /************************************/
- /*Read the interrupt status register */
- /************************************/
- /* ui_StatusRegister = inl(devpriv->iobase+i_Offset + 16); */
- ui_StatusRegister =
- inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 16);
-
- /*************************/
- /*Test if interrupt occur */
- /*************************/
-
- if ((ui_StatusRegister & 0x2) == 0x2) {
- /*************************/
- /*Read the channel number */
- /*************************/
- /* ui_ChannelNumber = inl(devpriv->iobase+i_Offset + 24); */
- /* BEGIN JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */
- /* This value is not used */
- /* ui_ChannelNumber = inl(devpriv->iobase+s_BoardInfos [dev->minor].i_Offset + 24); */
- s->async->events = 0;
- /* END JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */
-
- /*************************************/
- /*Read the digital Analog Input value */
- /*************************************/
-
- /* data[i_Count] = inl(devpriv->iobase+i_Offset + 28); */
- /* Begin JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */
- /* data[s_BoardInfos [dev->minor].i_Count] = inl(devpriv->iobase+s_BoardInfos [dev->minor].i_Offset + 28); */
- s_BoardInfos[dev->minor].ui_ScanValueArray[s_BoardInfos[dev->
- minor].i_Count] =
- inl(devpriv->iobase +
- s_BoardInfos[dev->minor].i_Offset + 28);
- /* End JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */
-
- /* if((i_Count == (i_LastChannel-i_FirstChannel+3))) */
- if ((s_BoardInfos[dev->minor].i_Count ==
- (s_BoardInfos[dev->minor].i_LastChannel -
- s_BoardInfos[dev->minor].
- i_FirstChannel + 3))) {
-
- /* Begin JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
- s_BoardInfos[dev->minor].i_Count++;
-
- for (i = s_BoardInfos[dev->minor].i_FirstChannel;
- i <= s_BoardInfos[dev->minor].i_LastChannel;
- i++) {
- i_APCI3200_GetChannelCalibrationValue(dev, i,
- &s_BoardInfos[dev->minor].
- ui_ScanValueArray[s_BoardInfos[dev->
- minor].i_Count + ((i -
- s_BoardInfos
- [dev->minor].
- i_FirstChannel)
- * 3)],
- &s_BoardInfos[dev->minor].
- ui_ScanValueArray[s_BoardInfos[dev->
- minor].i_Count + ((i -
- s_BoardInfos
- [dev->minor].
- i_FirstChannel)
- * 3) + 1],
- &s_BoardInfos[dev->minor].
- ui_ScanValueArray[s_BoardInfos[dev->
- minor].i_Count + ((i -
- s_BoardInfos
- [dev->minor].
- i_FirstChannel)
- * 3) + 2]);
- }
-
- /* End JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
-
- /* i_Count=-1; */
-
- s_BoardInfos[dev->minor].i_Count = -1;
-
- /* async->buf_int_count+=(i_LastChannel-i_FirstChannel+4)*sizeof(unsigned int); */
- /* Begin JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */
- /* async->buf_int_count+=(s_BoardInfos [dev->minor].i_LastChannel-s_BoardInfos [dev->minor].i_FirstChannel+4)*sizeof(unsigned int); */
- /* End JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */
- /* async->buf_int_ptr+=(i_LastChannel-i_FirstChannel+4)*sizeof(unsigned int); */
- /* Begin JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */
- /* async->buf_int_ptr+=(s_BoardInfos [dev->minor].i_LastChannel-s_BoardInfos [dev->minor].i_FirstChannel+4)*sizeof(unsigned int); */
- /* comedi_eos(dev,s); */
-
- /* Set the event type (Comedi Buffer End Of Scan) */
- s->async->events |= COMEDI_CB_EOS;
-
- /* Test if enougth memory is available and allocate it for 7 values */
- /* n = comedi_buf_write_alloc(s->async, 7*sizeof(unsigned int)); */
- n = comedi_buf_write_alloc(s->async,
- (7 + 12) * sizeof(unsigned int));
-
- /* If not enough memory available, event is set to Comedi Buffer Error */
- if (n > ((7 + 12) * sizeof(unsigned int))) {
- printk("\ncomedi_buf_write_alloc n = %i", n);
- s->async->events |= COMEDI_CB_ERROR;
- }
- /* Write all 7 scan values in the comedi buffer */
- comedi_buf_memcpy_to(s->async, 0,
- (unsigned int *) s_BoardInfos[dev->minor].
- ui_ScanValueArray, (7 + 12) * sizeof(unsigned int));
-
- /* Update comedi buffer pinters indexes */
- comedi_buf_write_free(s->async,
- (7 + 12) * sizeof(unsigned int));
-
- /* Send events */
- comedi_event(dev, s);
- /* End JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */
-
- /* BEGIN JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */
- /* */
- /* if (s->async->buf_int_ptr>=s->async->data_len) // for buffer rool over */
- /* { */
- /* /* buffer rollover */ */
- /* s->async->buf_int_ptr=0; */
- /* comedi_eobuf(dev,s); */
- /* } */
- /* End JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */
- }
- /* i_Count++; */
- s_BoardInfos[dev->minor].i_Count++;
- }
- /* i_InterruptFlag=0; */
- s_BoardInfos[dev->minor].i_InterruptFlag = 0;
- return 0;
-}
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3200.h b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3200.h
deleted file mode 100644
index 812a9c4..0000000
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3200.h
+++ /dev/null
@@ -1,191 +0,0 @@
-/*
- * Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module.
- *
- * ADDI-DATA GmbH
- * Dieselstrasse 3
- * D-77833 Ottersweier
- * Tel: +19(0)7223/9493-0
- * Fax: +49(0)7223/9493-92
- * http://www.addi-data.com
- * info@addi-data.com
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 of the License, or (at your option)
- * any later version.
- */
-
-/* Card Specific information */
-#define APCI3200_BOARD_VENDOR_ID 0x15B8
-/* #define APCI3200_ADDRESS_RANGE 264 */
-
-int MODULE_NO;
-struct {
- int i_Gain;
- int i_Polarity;
- int i_OffsetRange;
- int i_Coupling;
- int i_SingleDiff;
- int i_AutoCalibration;
- unsigned int ui_ReloadValue;
- unsigned int ui_TimeUnitReloadVal;
- int i_Interrupt;
- int i_ModuleSelection;
-} Config_Parameters_Module1, Config_Parameters_Module2,
- Config_Parameters_Module3, Config_Parameters_Module4;
-
-/* ANALOG INPUT RANGE */
-static const struct comedi_lrange range_apci3200_ai = { 8, {
- BIP_RANGE(10),
- BIP_RANGE(5),
- BIP_RANGE(2),
- BIP_RANGE(1),
- UNI_RANGE(10),
- UNI_RANGE(5),
- UNI_RANGE(2),
- UNI_RANGE(1)
- }
-};
-
-static const struct comedi_lrange range_apci3300_ai = { 4, {
- UNI_RANGE(10),
- UNI_RANGE(5),
- UNI_RANGE(2),
- UNI_RANGE(1)
- }
-};
-
-/* Analog Input related Defines */
-#define APCI3200_AI_OFFSET_GAIN 0
-#define APCI3200_AI_SC_TEST 4
-#define APCI3200_AI_IRQ 8
-#define APCI3200_AI_AUTOCAL 12
-#define APCI3200_RELOAD_CONV_TIME_VAL 32
-#define APCI3200_CONV_TIME_TIME_BASE 36
-#define APCI3200_RELOAD_DELAY_TIME_VAL 40
-#define APCI3200_DELAY_TIME_TIME_BASE 44
-#define APCI3200_AI_MODULE1 0
-#define APCI3200_AI_MODULE2 64
-#define APCI3200_AI_MODULE3 128
-#define APCI3200_AI_MODULE4 192
-#define TRUE 1
-#define FALSE 0
-#define APCI3200_AI_EOSIRQ 16
-#define APCI3200_AI_EOS 20
-#define APCI3200_AI_CHAN_ID 24
-#define APCI3200_AI_CHAN_VAL 28
-#define ANALOG_INPUT 0
-#define TEMPERATURE 1
-#define RESISTANCE 2
-
-#define ENABLE_EXT_TRIG 1
-#define ENABLE_EXT_GATE 2
-#define ENABLE_EXT_TRIG_GATE 3
-
-#define APCI3200_MAXVOLT 2.5
-#define ADDIDATA_GREATER_THAN_TEST 0
-#define ADDIDATA_LESS_THAN_TEST 1
-
-#define ADDIDATA_UNIPOLAR 1
-#define ADDIDATA_BIPOLAR 2
-
-/* BEGIN JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
-#define MAX_MODULE 4
-/* END JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
-
-struct str_ADDIDATA_RTDStruct {
- unsigned int ul_NumberOfValue;
- unsigned int *pul_ResistanceValue;
- unsigned int *pul_TemperatureValue;
-};
-
-/* BEGIN JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
-struct str_Module {
-
- /* Begin JK 05/08/2003 change for Linux */
- unsigned long ul_CurrentSourceCJC;
- unsigned long ul_CurrentSource[5];
- /* End JK 05/08/2003 change for Linux */
-
- /* Begin CG 15/02/02 Rev 1.0 -> Rev 1.1 : Add Header Type 1 */
- unsigned long ul_GainFactor[8]; /* Gain Factor */
- unsigned int w_GainValue[10];
- /* End CG 15/02/02 Rev 1.0 -> Rev 1.1 : Add Header Type 1 */
-};
-
-/* END JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
-
-/* BEGIN JK 06.07.04: Management of sevrals boards */
-struct str_BoardInfos {
-
- int i_CJCAvailable;
- int i_CJCPolarity;
- int i_CJCGain;
- int i_InterruptFlag;
- int i_ADDIDATAPolarity;
- int i_ADDIDATAGain;
- int i_AutoCalibration;
- int i_ADDIDATAConversionTime;
- int i_ADDIDATAConversionTimeUnit;
- int i_ADDIDATAType;
- int i_ChannelNo;
- int i_ChannelCount;
- int i_ScanType;
- int i_FirstChannel;
- int i_LastChannel;
- int i_Sum;
- int i_Offset;
- unsigned int ui_Channel_num;
- int i_Count;
- int i_Initialised;
- /* UINT ui_InterruptChannelValue[96]; //Buffer */
- unsigned int ui_InterruptChannelValue[144]; /* Buffer */
- unsigned char b_StructInitialized;
- /* Begin JK 19.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */
- unsigned int ui_ScanValueArray[7 + 12]; /* 7 is the maximal number of channels */
- /* End JK 19.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */
-
- /* Begin JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
- int i_ConnectionType;
- int i_NbrOfModule;
- struct str_Module s_Module[MAX_MODULE];
- /* End JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
-};
-
-/* END JK 06.07.04: Management of sevrals boards */
-
-/* Hardware Layer functions for Apci3200 */
-
-/* AI */
-
-int i_APCI3200_ConfigAnalogInput(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-int i_APCI3200_ReadAnalogInput(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-int i_APCI3200_InsnWriteReleaseAnalogInput(struct comedi_device *dev,
- struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-int i_APCI3200_InsnBits_AnalogInput_Test(struct comedi_device *dev,
- struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-int i_APCI3200_StopCyclicAcquisition(struct comedi_device *dev, struct comedi_subdevice *s);
-int i_APCI3200_InterruptHandleEos(struct comedi_device *dev);
-int i_APCI3200_CommandTestAnalogInput(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_cmd *cmd);
-int i_APCI3200_CommandAnalogInput(struct comedi_device *dev, struct comedi_subdevice *s);
-int i_APCI3200_ReadDigitalInput(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-/* Interrupt */
-void v_APCI3200_Interrupt(int irq, void *d);
-int i_APCI3200_InterruptHandleEos(struct comedi_device *dev);
-/* Reset functions */
-int i_APCI3200_Reset(struct comedi_device *dev);
-
-int i_APCI3200_ReadCJCCalOffset(struct comedi_device *dev, unsigned int *data);
-int i_APCI3200_ReadCJCValue(struct comedi_device *dev, unsigned int *data);
-int i_APCI3200_ReadCalibrationGainValue(struct comedi_device *dev, unsigned int *data);
-int i_APCI3200_ReadCalibrationOffsetValue(struct comedi_device *dev, unsigned int *data);
-int i_APCI3200_Read1AnalogInputChannel(struct comedi_device *dev,
- struct comedi_subdevice *s, struct comedi_insn *insn,
- unsigned int *data);
-int i_APCI3200_ReadCJCCalGain(struct comedi_device *dev, unsigned int *data);
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3501.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3501.c
index acaceb0..7a18ce7 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3501.c
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3501.c
@@ -46,229 +46,75 @@
+----------+-----------+------------------------------------------------+
*/
-/*
-+----------------------------------------------------------------------------+
-| Included files |
-+----------------------------------------------------------------------------+
-*/
-#include "hwdrv_apci3501.h"
+/* Card Specific information */
+#define APCI3501_ADDRESS_RANGE 255
-/*
-+----------------------------------------------------------------------------+
-| Function Name : int i_APCI3501_ReadDigitalInput |
-| (struct comedi_device *dev,struct comedi_subdevice *s, |
-| struct comedi_insn *insn,unsigned int *data) |
-+----------------------------------------------------------------------------+
-| Task : Read value of the selected channel or port |
-+----------------------------------------------------------------------------+
-| Input Parameters : struct comedi_device *dev : Driver handle |
-| unsigned int ui_NoOfChannels : No Of Channels To read |
-| unsigned int *data : Data Pointer to read status |
-+----------------------------------------------------------------------------+
-| Output Parameters : -- |
-+----------------------------------------------------------------------------+
-| Return Value : TRUE : No error occur |
-| : FALSE : Error occur. Return the error |
-| |
-+----------------------------------------------------------------------------+
-*/
+#define APCI3501_DIGITAL_IP 0x50
+#define APCI3501_DIGITAL_OP 0x40
+#define APCI3501_ANALOG_OUTPUT 0x00
-int i_APCI3501_ReadDigitalInput(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data)
+/* Analog Output related Defines */
+#define APCI3501_AO_VOLT_MODE 0
+#define APCI3501_AO_PROG 4
+#define APCI3501_AO_TRIG_SCS 8
+#define UNIPOLAR 0
+#define BIPOLAR 1
+#define MODE0 0
+#define MODE1 1
+
+/* Watchdog Related Defines */
+
+#define APCI3501_WATCHDOG 0x20
+#define APCI3501_TCW_SYNC_ENABLEDISABLE 0
+#define APCI3501_TCW_RELOAD_VALUE 4
+#define APCI3501_TCW_TIMEBASE 8
+#define APCI3501_TCW_PROG 12
+#define APCI3501_TCW_TRIG_STATUS 16
+#define APCI3501_TCW_IRQ 20
+#define APCI3501_TCW_WARN_TIMEVAL 24
+#define APCI3501_TCW_WARN_TIMEBASE 28
+#define ADDIDATA_TIMER 0
+#define ADDIDATA_WATCHDOG 2
+
+/* ANALOG OUTPUT RANGE */
+static struct comedi_lrange range_apci3501_ao = {
+ 2, {
+ BIP_RANGE(10),
+ UNI_RANGE(10)
+ }
+};
+
+static int apci3501_di_insn_bits(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
{
- unsigned int ui_Temp;
- unsigned int ui_NoOfChannel;
- ui_NoOfChannel = CR_CHAN(insn->chanspec);
- ui_Temp = data[0];
- *data = inl(devpriv->iobase + APCI3501_DIGITAL_IP);
- if (ui_Temp == 0) {
- *data = (*data >> ui_NoOfChannel) & 0x1;
- } /* if (ui_Temp==0) */
- else {
- if (ui_Temp == 1) {
+ struct addi_private *devpriv = dev->private;
- *data = *data & 0x3;
- } /* if (ui_Temp==1) */
- else {
- printk("\nSpecified channel not supported \n");
- } /* elseif (ui_Temp==1) */
- } /* elseif (ui_Temp==0) */
+ data[1] = inl(devpriv->iobase + APCI3501_DIGITAL_IP) & 0x3;
+
return insn->n;
}
-/*
-+----------------------------------------------------------------------------+
-| Function Name : int i_APCI3501_ConfigDigitalOutput |
-| (struct comedi_device *dev,struct comedi_subdevice *s, |
-| struct comedi_insn *insn,unsigned int *data) |
-+----------------------------------------------------------------------------+
-| Task : Configures The Digital Output Subdevice. |
-+----------------------------------------------------------------------------+
-| Input Parameters : struct comedi_device *dev : Driver handle |
-| unsigned int *data : Data Pointer contains |
-| configuration parameters as below |
-| |
-| data[1] : 1 Enable VCC Interrupt |
-| 0 Disable VCC Interrupt |
-| data[2] : 1 Enable CC Interrupt |
-| 0 Disable CC Interrupt |
-| |
-+----------------------------------------------------------------------------+
-| Output Parameters : -- |
-+----------------------------------------------------------------------------+
-| Return Value : TRUE : No error occur |
-| : FALSE : Error occur. Return the error |
-| |
-+----------------------------------------------------------------------------+
-*/
-int i_APCI3501_ConfigDigitalOutput(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data)
+static int apci3501_do_insn_bits(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
{
+ struct addi_private *devpriv = dev->private;
+ unsigned int mask = data[0];
+ unsigned int bits = data[1];
- if ((data[0] != 0) && (data[0] != 1)) {
- comedi_error(dev,
- "Not a valid Data !!! ,Data should be 1 or 0\n");
- return -EINVAL;
- } /* if ( (data[0]!=0) && (data[0]!=1) ) */
- if (data[0]) {
- devpriv->b_OutputMemoryStatus = ADDIDATA_ENABLE;
- } /* if (data[0]) */
- else {
- devpriv->b_OutputMemoryStatus = ADDIDATA_DISABLE;
- } /* else if (data[0]) */
- return insn->n;
-}
+ s->state = inl(devpriv->iobase + APCI3501_DIGITAL_OP);
+ if (mask) {
+ s->state &= ~mask;
+ s->state |= (bits & mask);
-/*
-+----------------------------------------------------------------------------+
-| Function Name : int i_APCI3501_WriteDigitalOutput |
-| (struct comedi_device *dev,struct comedi_subdevice *s, |
-| struct comedi_insn *insn,unsigned int *data) |
-+----------------------------------------------------------------------------+
-| Task : writes To the digital Output Subdevice |
-+----------------------------------------------------------------------------+
-| Input Parameters : struct comedi_device *dev : Driver handle |
-| struct comedi_subdevice *s : Subdevice Pointer |
-| struct comedi_insn *insn : Insn Structure Pointer |
-| unsigned int *data : Data Pointer contains |
-| configuration parameters as below |
-| |
-+----------------------------------------------------------------------------+
-| Output Parameters : -- |
-+----------------------------------------------------------------------------+
-| Return Value : TRUE : No error occur |
-| : FALSE : Error occur. Return the error |
-| |
-+----------------------------------------------------------------------------+
-*/
-int i_APCI3501_WriteDigitalOutput(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data)
-{
- unsigned int ui_Temp, ui_Temp1;
- unsigned int ui_NoOfChannel = CR_CHAN(insn->chanspec); /* get the channel */
- if (devpriv->b_OutputMemoryStatus) {
- ui_Temp = inl(devpriv->iobase + APCI3501_DIGITAL_OP);
- } /* if(devpriv->b_OutputMemoryStatus ) */
- else {
- ui_Temp = 0;
- } /* if(devpriv->b_OutputMemoryStatus ) */
- if (data[3] == 0) {
- if (data[1] == 0) {
- data[0] = (data[0] << ui_NoOfChannel) | ui_Temp;
- outl(data[0], devpriv->iobase + APCI3501_DIGITAL_OP);
- } /* if(data[1]==0) */
- else {
- if (data[1] == 1) {
- data[0] = (data[0] << (2 * data[2])) | ui_Temp;
- outl(data[0],
- devpriv->iobase + APCI3501_DIGITAL_OP);
- } /* if(data[1]==1) */
- else {
- printk("\nSpecified channel not supported\n");
- } /* else if(data[1]==1) */
- } /* elseif(data[1]==0) */
- } /* if(data[3]==0) */
- else {
- if (data[3] == 1) {
- if (data[1] == 0) {
- data[0] = ~data[0] & 0x1;
- ui_Temp1 = 1;
- ui_Temp1 = ui_Temp1 << ui_NoOfChannel;
- ui_Temp = ui_Temp | ui_Temp1;
- data[0] =
- (data[0] << ui_NoOfChannel) ^
- 0xffffffff;
- data[0] = data[0] & ui_Temp;
- outl(data[0],
- devpriv->iobase + APCI3501_DIGITAL_OP);
- } /* if(data[1]==0) */
- else {
- if (data[1] == 1) {
- data[0] = ~data[0] & 0x3;
- ui_Temp1 = 3;
- ui_Temp1 = ui_Temp1 << 2 * data[2];
- ui_Temp = ui_Temp | ui_Temp1;
- data[0] =
- ((data[0] << (2 *
- data[2])) ^
- 0xffffffff) & ui_Temp;
- outl(data[0],
- devpriv->iobase +
- APCI3501_DIGITAL_OP);
- } /* if(data[1]==1) */
- else {
- printk("\nSpecified channel not supported\n");
- } /* else if(data[1]==1) */
- } /* elseif(data[1]==0) */
- } /* if(data[3]==1); */
- else {
- printk("\nSpecified functionality does not exist\n");
- return -EINVAL;
- } /* if else data[3]==1) */
- } /* if else data[3]==0) */
- return insn->n;
-}
+ outl(s->state, devpriv->iobase + APCI3501_DIGITAL_OP);
+ }
-/*
-+----------------------------------------------------------------------------+
-| Function Name : int i_APCI3501_ReadDigitalOutput |
-| (struct comedi_device *dev,struct comedi_subdevice *s, |
-| struct comedi_insn *insn,unsigned int *data) |
-+----------------------------------------------------------------------------+
-| Task : Read value of the selected channel or port |
-+----------------------------------------------------------------------------+
-| Input Parameters : struct comedi_device *dev : Driver handle |
-| unsigned int ui_NoOfChannels : No Of Channels To read |
-| unsigned int *data : Data Pointer to read status |
-+----------------------------------------------------------------------------+
-| Output Parameters : -- |
-+----------------------------------------------------------------------------+
-| Return Value : TRUE : No error occur |
-| : FALSE : Error occur. Return the error |
-| |
-+----------------------------------------------------------------------------+
-*/
-int i_APCI3501_ReadDigitalOutput(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data)
-{
- unsigned int ui_Temp;
- unsigned int ui_NoOfChannel;
+ data[1] = s->state;
- ui_NoOfChannel = CR_CHAN(insn->chanspec);
- ui_Temp = data[0];
- *data = inl(devpriv->iobase + APCI3501_DIGITAL_OP);
- if (ui_Temp == 0) {
- *data = (*data >> ui_NoOfChannel) & 0x1;
- } /* if (ui_Temp==0) */
- else {
- if (ui_Temp == 1) {
- *data = *data & 0x3;
-
- } /* if (ui_Temp==1) */
- else {
- printk("\nSpecified channel not supported \n");
- } /* else if (ui_Temp==1) */
- } /* else if (ui_Temp==0) */
return insn->n;
}
@@ -298,9 +144,13 @@
| |
+----------------------------------------------------------------------------+
*/
-int i_APCI3501_ConfigAnalogOutput(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data)
+static int i_APCI3501_ConfigAnalogOutput(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
{
+ struct addi_private *devpriv = dev->private;
+
outl(data[0],
devpriv->iobase + APCI3501_ANALOG_OUTPUT +
APCI3501_AO_VOLT_MODE);
@@ -336,9 +186,12 @@
| |
+----------------------------------------------------------------------------+
*/
-int i_APCI3501_WriteAnalogOutput(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data)
+static int i_APCI3501_WriteAnalogOutput(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
{
+ struct addi_private *devpriv = dev->private;
unsigned int ul_Command1 = 0, ul_Channel_no, ul_Polarity, ul_DAC_Ready = 0;
ul_Channel_no = CR_CHAN(insn->chanspec);
@@ -410,10 +263,14 @@
| |
+----------------------------------------------------------------------------+
*/
-int i_APCI3501_ConfigTimerCounterWatchdog(struct comedi_device *dev,
- struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
+static int i_APCI3501_ConfigTimerCounterWatchdog(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
{
+ struct addi_private *devpriv = dev->private;
unsigned int ul_Command1 = 0;
+
devpriv->tsk_Current = current;
if (data[0] == ADDIDATA_WATCHDOG) {
@@ -511,11 +368,15 @@
+----------------------------------------------------------------------------+
*/
-int i_APCI3501_StartStopWriteTimerCounterWatchdog(struct comedi_device *dev,
- struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
+static int i_APCI3501_StartStopWriteTimerCounterWatchdog(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
{
+ struct addi_private *devpriv = dev->private;
unsigned int ul_Command1 = 0;
int i_Temp;
+
if (devpriv->b_TimerSelectMode == ADDIDATA_WATCHDOG) {
if (data[1] == 1) {
@@ -613,9 +474,12 @@
+----------------------------------------------------------------------------+
*/
-int i_APCI3501_ReadTimerCounterWatchdog(struct comedi_device *dev,
- struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
+static int i_APCI3501_ReadTimerCounterWatchdog(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
{
+ struct addi_private *devpriv = dev->private;
if (devpriv->b_TimerSelectMode == ADDIDATA_WATCHDOG) {
data[0] =
@@ -654,10 +518,12 @@
+----------------------------------------------------------------------------+
*/
-int i_APCI3501_Reset(struct comedi_device *dev)
+static int i_APCI3501_Reset(struct comedi_device *dev)
{
+ struct addi_private *devpriv = dev->private;
int i_Count = 0, i_temp = 0;
unsigned int ul_Command1 = 0, ul_Polarity, ul_DAC_Ready = 0;
+
outl(0x0, devpriv->iobase + APCI3501_DIGITAL_OP);
outl(1, devpriv->iobase + APCI3501_ANALOG_OUTPUT +
APCI3501_AO_VOLT_MODE);
@@ -705,12 +571,14 @@
| |
+----------------------------------------------------------------------------+
*/
-void v_APCI3501_Interrupt(int irq, void *d)
+static void v_APCI3501_Interrupt(int irq, void *d)
{
int i_temp;
struct comedi_device *dev = d;
+ struct addi_private *devpriv = dev->private;
unsigned int ui_Timer_AOWatchdog;
unsigned long ul_Command1;
+
/* Disable Interrupt */
ul_Command1 =
inl(devpriv->iobase + APCI3501_WATCHDOG + APCI3501_TCW_PROG);
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3501.h b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3501.h
deleted file mode 100644
index 63df635..0000000
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3501.h
+++ /dev/null
@@ -1,98 +0,0 @@
-/*
- * Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module.
- *
- * ADDI-DATA GmbH
- * Dieselstrasse 3
- * D-77833 Ottersweier
- * Tel: +19(0)7223/9493-0
- * Fax: +49(0)7223/9493-92
- * http://www.addi-data.com
- * info@addi-data.com
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 of the License, or (at your option)
- * any later version.
- */
-
-/* Card Specific information */
-#define APCI3501_BOARD_VENDOR_ID 0x15B8
-#define APCI3501_ADDRESS_RANGE 255
-
-#define APCI3501_DIGITAL_IP 0x50
-#define APCI3501_DIGITAL_OP 0x40
-#define APCI3501_ANALOG_OUTPUT 0x00
-
-/* Analog Output related Defines */
-#define APCI3501_AO_VOLT_MODE 0
-#define APCI3501_AO_PROG 4
-#define APCI3501_AO_TRIG_SCS 8
-#define UNIPOLAR 0
-#define BIPOLAR 1
-#define MODE0 0
-#define MODE1 1
-/* ANALOG OUTPUT RANGE */
-static struct comedi_lrange range_apci3501_ao = { 2, {
- BIP_RANGE(10),
- UNI_RANGE(10)
- }
-};
-
-/* Watchdog Related Defines */
-
-#define APCI3501_WATCHDOG 0x20
-#define APCI3501_TCW_SYNC_ENABLEDISABLE 0
-#define APCI3501_TCW_RELOAD_VALUE 4
-#define APCI3501_TCW_TIMEBASE 8
-#define APCI3501_TCW_PROG 12
-#define APCI3501_TCW_TRIG_STATUS 16
-#define APCI3501_TCW_IRQ 20
-#define APCI3501_TCW_WARN_TIMEVAL 24
-#define APCI3501_TCW_WARN_TIMEBASE 28
-#define ADDIDATA_TIMER 0
-#define ADDIDATA_WATCHDOG 2
-
-/* Hardware Layer functions for Apci3501 */
-
-/* AO */
-int i_APCI3501_ConfigAnalogOutput(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-int i_APCI3501_WriteAnalogOutput(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-
-/*
-* DI for di read INT i_APCI3501_ReadDigitalInput(struct
-* comedi_device *dev,struct comedi_subdevice *s,struct comedi_insn
-* *insn,unsigned int *data);
-*/
-
-int i_APCI3501_ReadDigitalInput(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-
-/* DO */
-int i_APCI3501_ConfigDigitalOutput(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-int i_APCI3501_WriteDigitalOutput(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-int i_APCI3501_ReadDigitalOutput(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-
-/* TIMER
- * timer value is passed as u seconds
- */
-
-int i_APCI3501_ConfigTimerCounterWatchdog(struct comedi_device *dev,
- struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-int i_APCI3501_StartStopWriteTimerCounterWatchdog(struct comedi_device *dev,
- struct comedi_subdevice *s,
- struct comedi_insn *insn,
- unsigned int *data);
-int i_APCI3501_ReadTimerCounterWatchdog(struct comedi_device *dev,
- struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-/* Interrupt */
-void v_APCI3501_Interrupt(int irq, void *d);
-
-/* Reset functions */
-int i_APCI3501_Reset(struct comedi_device *dev);
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3xxx.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3xxx.c
index fff99df..a45a2a2 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3xxx.c
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3xxx.c
@@ -44,7 +44,35 @@
+----------+-----------+------------------------------------------------+
*/
-#include "hwdrv_apci3xxx.h"
+#ifndef COMEDI_SUBD_TTLIO
+#define COMEDI_SUBD_TTLIO 11 /* Digital Input Output But TTL */
+#endif
+
+#define APCI3XXX_SINGLE 0
+#define APCI3XXX_DIFF 1
+#define APCI3XXX_CONFIGURATION 0
+
+#define APCI3XXX_TTL_INIT_DIRECTION_PORT2 0
+
+static const struct comedi_lrange range_apci3XXX_ai = {
+ 8, {
+ BIP_RANGE(10),
+ BIP_RANGE(5),
+ BIP_RANGE(2),
+ BIP_RANGE(1),
+ UNI_RANGE(10),
+ UNI_RANGE(5),
+ UNI_RANGE(2),
+ UNI_RANGE(1)
+ }
+};
+
+static const struct comedi_lrange range_apci3XXX_ao = {
+ 2, {
+ BIP_RANGE(10),
+ UNI_RANGE(10)
+ }
+};
/*
+----------------------------------------------------------------------------+
@@ -69,6 +97,8 @@
*/
static int i_APCI3XXX_TestConversionStarted(struct comedi_device *dev)
{
+ struct addi_private *devpriv = dev->private;
+
if ((readl(devpriv->dw_AiBase + 8) & 0x80000UL) == 0x80000UL)
return 1;
else
@@ -108,6 +138,8 @@
struct comedi_insn *insn,
unsigned int *data)
{
+ const struct addi_board *this_board = comedi_board(dev);
+ struct addi_private *devpriv = dev->private;
int i_ReturnValue = insn->n;
unsigned char b_TimeBase = 0;
unsigned char b_SingleDiff = 0;
@@ -358,6 +390,8 @@
struct comedi_insn *insn,
unsigned int *data)
{
+ const struct addi_board *this_board = comedi_board(dev);
+ struct addi_private *devpriv = dev->private;
int i_ReturnValue = insn->n;
unsigned char b_Configuration = (unsigned char) CR_RANGE(insn->chanspec);
unsigned char b_Channel = (unsigned char) CR_CHAN(insn->chanspec);
@@ -571,6 +605,7 @@
static void v_APCI3XXX_Interrupt(int irq, void *d)
{
struct comedi_device *dev = d;
+ struct addi_private *devpriv = dev->private;
unsigned char b_CopyCpt = 0;
unsigned int dw_Status = 0;
@@ -651,6 +686,7 @@
struct comedi_insn *insn,
unsigned int *data)
{
+ struct addi_private *devpriv = dev->private;
unsigned char b_Range = (unsigned char) CR_RANGE(insn->chanspec);
unsigned char b_Channel = (unsigned char) CR_CHAN(insn->chanspec);
unsigned int dw_Status = 0;
@@ -755,6 +791,7 @@
struct comedi_insn *insn,
unsigned int *data)
{
+ struct addi_private *devpriv = dev->private;
int i_ReturnValue = insn->n;
unsigned char b_Command = 0;
@@ -884,6 +921,7 @@
struct comedi_insn *insn,
unsigned int *data)
{
+ struct addi_private *devpriv = dev->private;
int i_ReturnValue = insn->n;
unsigned char b_ChannelCpt = 0;
unsigned int dw_ChannelMask = 0;
@@ -1040,6 +1078,7 @@
struct comedi_insn *insn,
unsigned int *data)
{
+ struct addi_private *devpriv = dev->private;
unsigned char b_Channel = (unsigned char) CR_CHAN(insn->chanspec);
int i_ReturnValue = insn->n;
unsigned int *pls_ReadData = data;
@@ -1154,6 +1193,7 @@
struct comedi_insn *insn,
unsigned int *data)
{
+ struct addi_private *devpriv = dev->private;
int i_ReturnValue = insn->n;
unsigned char b_Channel = (unsigned char) CR_CHAN(insn->chanspec);
unsigned char b_State = 0;
@@ -1236,367 +1276,38 @@
return i_ReturnValue;
}
-/*
-+----------------------------------------------------------------------------+
-| DIGITAL INPUT SUBDEVICE |
-+----------------------------------------------------------------------------+
-*/
-
-/*
-+----------------------------------------------------------------------------+
-| Function name :int i_APCI3XXX_InsnReadDigitalInput |
-| (struct comedi_device *dev, |
-| struct comedi_subdevice *s, |
-| struct comedi_insn *insn, |
-| unsigned int *data) |
-+----------------------------------------------------------------------------+
-| Task : Reads the value of the specified Digital input channel |
-+----------------------------------------------------------------------------+
-| Input Parameters : b_Channel = CR_CHAN(insn->chanspec) (0 to 3) |
-+----------------------------------------------------------------------------+
-| Output Parameters : data[0] : Channel value |
-+----------------------------------------------------------------------------+
-| Return Value : 0 : No error |
-| -3 : Channel selection error |
-| -101 : Data size error |
-+----------------------------------------------------------------------------+
-*/
-
-static int i_APCI3XXX_InsnReadDigitalInput(struct comedi_device *dev,
- struct comedi_subdevice *s,
- struct comedi_insn *insn,
- unsigned int *data)
+static int apci3xxx_di_insn_bits(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
{
- int i_ReturnValue = insn->n;
- unsigned char b_Channel = (unsigned char) CR_CHAN(insn->chanspec);
- unsigned int dw_Temp = 0;
+ struct addi_private *devpriv = dev->private;
- /***************************/
- /* Test the channel number */
- /***************************/
+ data[1] = inl(devpriv->iobase + 32) & 0xf;
- if (b_Channel <= devpriv->s_EeParameters.i_NbrDiChannel) {
- /************************/
- /* Test the buffer size */
- /************************/
-
- if (insn->n >= 1) {
- dw_Temp = inl(devpriv->iobase + 32);
- *data = (dw_Temp >> b_Channel) & 1;
- } else {
- /*******************/
- /* Data size error */
- /*******************/
-
- printk("Buffer size error\n");
- i_ReturnValue = -101;
- }
- } else {
- /***************************/
- /* Channel selection error */
- /***************************/
-
- printk("Channel selection error\n");
- i_ReturnValue = -3;
- }
-
- return i_ReturnValue;
+ return insn->n;
}
-/*
-+----------------------------------------------------------------------------+
-| Function name :int i_APCI3XXX_InsnBitsDigitalInput |
-| (struct comedi_device *dev, |
-| struct comedi_subdevice *s, |
-| struct comedi_insn *insn, |
-| unsigned int *data) |
-+----------------------------------------------------------------------------+
-| Task : Reads the value of the Digital input Port i.e.4channels|
-+----------------------------------------------------------------------------+
-| Input Parameters : - |
-+----------------------------------------------------------------------------+
-| Output Parameters : data[0] : Port value |
-+----------------------------------------------------------------------------+
-| Return Value :>0: No error |
-| .... |
-| -101 : Data size error |
-+----------------------------------------------------------------------------+
-*/
-static int i_APCI3XXX_InsnBitsDigitalInput(struct comedi_device *dev,
- struct comedi_subdevice *s,
- struct comedi_insn *insn,
- unsigned int *data)
+static int apci3xxx_do_insn_bits(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
{
- int i_ReturnValue = insn->n;
- unsigned int dw_Temp = 0;
+ struct addi_private *devpriv = dev->private;
+ unsigned int mask = data[0];
+ unsigned int bits = data[1];
- /************************/
- /* Test the buffer size */
- /************************/
+ s->state = inl(devpriv->iobase + 48) & 0xf;
+ if (mask) {
+ s->state &= ~mask;
+ s->state |= (bits & mask);
- if (insn->n >= 1) {
- dw_Temp = inl(devpriv->iobase + 32);
- *data = dw_Temp & 0xf;
- } else {
- /*******************/
- /* Data size error */
- /*******************/
-
- printk("Buffer size error\n");
- i_ReturnValue = -101;
+ outl(s->state, devpriv->iobase + 48);
}
- return i_ReturnValue;
-}
+ data[1] = s->state;
-/*
-+----------------------------------------------------------------------------+
-| DIGITAL OUTPUT SUBDEVICE |
-+----------------------------------------------------------------------------+
-
-*/
-
-/*
-+----------------------------------------------------------------------------+
-| Function name :int i_APCI3XXX_InsnBitsDigitalOutput |
-| (struct comedi_device *dev, |
-| struct comedi_subdevice *s, |
-| struct comedi_insn *insn, |
-| unsigned int *data) |
-+----------------------------------------------------------------------------+
-| Task : Write the selected output mask and read the status from|
-| all digital output channles |
-+----------------------------------------------------------------------------+
-| Input Parameters : dw_ChannelMask = data [0]; |
-| dw_BitMask = data [1]; |
-+----------------------------------------------------------------------------+
-| Output Parameters : data[1] : All digital output channles states |
-+----------------------------------------------------------------------------+
-| Return Value : >0 : No error |
-| -4 : Channel mask error |
-| -101 : Data size error |
-+----------------------------------------------------------------------------+
-*/
-static int i_APCI3XXX_InsnBitsDigitalOutput(struct comedi_device *dev,
- struct comedi_subdevice *s,
- struct comedi_insn *insn,
- unsigned int *data)
-{
- int i_ReturnValue = insn->n;
- unsigned char b_ChannelCpt = 0;
- unsigned int dw_ChannelMask = 0;
- unsigned int dw_BitMask = 0;
- unsigned int dw_Status = 0;
-
- /************************/
- /* Test the buffer size */
- /************************/
-
- if (insn->n >= 2) {
- /*******************************/
- /* Get the channe and bit mask */
- /*******************************/
-
- dw_ChannelMask = data[0];
- dw_BitMask = data[1];
-
- /*************************/
- /* Test the channel mask */
- /*************************/
-
- if ((dw_ChannelMask & 0XFFFFFFF0) == 0) {
- /*********************************/
- /* Test if set/reset any channel */
- /*********************************/
-
- if (dw_ChannelMask & 0xF) {
- /********************************/
- /* Read the digital output port */
- /********************************/
-
- dw_Status = inl(devpriv->iobase + 48);
-
- for (b_ChannelCpt = 0; b_ChannelCpt < 4;
- b_ChannelCpt++) {
- if ((dw_ChannelMask >> b_ChannelCpt) &
- 1) {
- dw_Status =
- (dw_Status & (0xF -
- (1 << b_ChannelCpt))) | (dw_BitMask & (1 << b_ChannelCpt));
- }
- }
-
- outl(dw_Status, devpriv->iobase + 48);
- }
-
- /********************************/
- /* Read the digital output port */
- /********************************/
-
- data[1] = inl(devpriv->iobase + 48);
- } else {
- /************************/
- /* Config command error */
- /************************/
-
- printk("Channel mask error\n");
- i_ReturnValue = -4;
- }
- } else {
- /*******************/
- /* Data size error */
- /*******************/
-
- printk("Buffer size error\n");
- i_ReturnValue = -101;
- }
-
- return i_ReturnValue;
-}
-
-/*
-+----------------------------------------------------------------------------+
-| Function name :int i_APCI3XXX_InsnWriteDigitalOutput |
-| (struct comedi_device *dev, |
-| struct comedi_subdevice *s, |
-| struct comedi_insn *insn, |
-| unsigned int *data) |
-+----------------------------------------------------------------------------+
-| Task : Set the state from digital output channel |
-+----------------------------------------------------------------------------+
-| Input Parameters : b_Channel = CR_CHAN(insn->chanspec) |
-| b_State = data [0] |
-+----------------------------------------------------------------------------+
-| Output Parameters : - |
-+----------------------------------------------------------------------------+
-| Return Value : >0 : No error |
-| -3 : Channel selection error |
-| -101 : Data size error |
-+----------------------------------------------------------------------------+
-*/
-
-static int i_APCI3XXX_InsnWriteDigitalOutput(struct comedi_device *dev,
- struct comedi_subdevice *s,
- struct comedi_insn *insn,
- unsigned int *data)
-{
- int i_ReturnValue = insn->n;
- unsigned char b_Channel = CR_CHAN(insn->chanspec);
- unsigned char b_State = 0;
- unsigned int dw_Status = 0;
-
- /************************/
- /* Test the buffer size */
- /************************/
-
- if (insn->n >= 1) {
- /***************************/
- /* Test the channel number */
- /***************************/
-
- if (b_Channel < devpriv->s_EeParameters.i_NbrDoChannel) {
- /*******************/
- /* Get the command */
- /*******************/
-
- b_State = (unsigned char) data[0];
-
- /********************************/
- /* Read the digital output port */
- /********************************/
-
- dw_Status = inl(devpriv->iobase + 48);
-
- dw_Status =
- (dw_Status & (0xF -
- (1 << b_Channel))) | ((b_State & 1) <<
- b_Channel);
- outl(dw_Status, devpriv->iobase + 48);
- } else {
- /***************************/
- /* Channel selection error */
- /***************************/
-
- printk("Channel selection error\n");
- i_ReturnValue = -3;
- }
- } else {
- /*******************/
- /* Data size error */
- /*******************/
-
- printk("Buffer size error\n");
- i_ReturnValue = -101;
- }
-
- return i_ReturnValue;
-}
-
-/*
-+----------------------------------------------------------------------------+
-| Function name :int i_APCI3XXX_InsnReadDigitalOutput |
-| (struct comedi_device *dev, |
-| struct comedi_subdevice *s, |
-| struct comedi_insn *insn, |
-| unsigned int *data) |
-+----------------------------------------------------------------------------+
-| Task : Read the state from digital output channel |
-+----------------------------------------------------------------------------+
-| Input Parameters : b_Channel = CR_CHAN(insn->chanspec) |
-+----------------------------------------------------------------------------+
-| Output Parameters : b_State = data [0] |
-+----------------------------------------------------------------------------+
-| Return Value : >0 : No error |
-| -3 : Channel selection error |
-| -101 : Data size error |
-+----------------------------------------------------------------------------+
-*/
-
-static int i_APCI3XXX_InsnReadDigitalOutput(struct comedi_device *dev,
- struct comedi_subdevice *s,
- struct comedi_insn *insn,
- unsigned int *data)
-{
- int i_ReturnValue = insn->n;
- unsigned char b_Channel = CR_CHAN(insn->chanspec);
- unsigned int dw_Status = 0;
-
- /************************/
- /* Test the buffer size */
- /************************/
-
- if (insn->n >= 1) {
- /***************************/
- /* Test the channel number */
- /***************************/
-
- if (b_Channel < devpriv->s_EeParameters.i_NbrDoChannel) {
- /********************************/
- /* Read the digital output port */
- /********************************/
-
- dw_Status = inl(devpriv->iobase + 48);
-
- dw_Status = (dw_Status >> b_Channel) & 1;
- *data = dw_Status;
- } else {
- /***************************/
- /* Channel selection error */
- /***************************/
-
- printk("Channel selection error\n");
- i_ReturnValue = -3;
- }
- } else {
- /*******************/
- /* Data size error */
- /*******************/
-
- printk("Buffer size error\n");
- i_ReturnValue = -101;
- }
-
- return i_ReturnValue;
+ return insn->n;
}
/*
@@ -1614,6 +1325,7 @@
static int i_APCI3XXX_Reset(struct comedi_device *dev)
{
+ struct addi_private *devpriv = dev->private;
unsigned char b_Cpt = 0;
/*************************/
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3xxx.h b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3xxx.h
deleted file mode 100644
index e10b7e5..0000000
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3xxx.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module.
- *
- * ADDI-DATA GmbH
- * Dieselstrasse 3
- * D-77833 Ottersweier
- * Tel: +19(0)7223/9493-0
- * Fax: +49(0)7223/9493-92
- * http://www.addi-data.com
- * info@addi-data.com
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 of the License, or (at your option)
- * any later version.
- */
-
-#ifndef COMEDI_SUBD_TTLIO
-#define COMEDI_SUBD_TTLIO 11 /* Digital Input Output But TTL */
-#endif
-
-#ifndef ADDIDATA_ENABLE
-#define ADDIDATA_ENABLE 1
-#define ADDIDATA_DISABLE 0
-#endif
-
-#define APCI3XXX_SINGLE 0
-#define APCI3XXX_DIFF 1
-#define APCI3XXX_CONFIGURATION 0
-
-#define APCI3XXX_TTL_INIT_DIRECTION_PORT2 0
-
-#ifdef __KERNEL__
-
-static const struct comedi_lrange range_apci3XXX_ai = { 8, {BIP_RANGE(10),
- BIP_RANGE(5),
- BIP_RANGE(2),
- BIP_RANGE(1),
- UNI_RANGE(10),
- UNI_RANGE(5),
- UNI_RANGE(2),
- UNI_RANGE(1)}
-};
-
-static const struct comedi_lrange range_apci3XXX_ao = { 2, {BIP_RANGE(10),
- UNI_RANGE(10)}
-};
-#endif
diff --git a/drivers/staging/comedi/drivers/addi_apci_035.c b/drivers/staging/comedi/drivers/addi_apci_035.c
index 4c00df4..c981d4b 100644
--- a/drivers/staging/comedi/drivers/addi_apci_035.c
+++ b/drivers/staging/comedi/drivers/addi_apci_035.c
@@ -1,11 +1,77 @@
-#define CONFIG_APCI_035 1
+#include "../comedidev.h"
+#include "comedi_fc.h"
+#include "amcc_s5933.h"
+
+#include "addi-data/addi_common.h"
#define ADDIDATA_WATCHDOG 2 /* Or shold it be something else */
-#define ADDIDATA_DRIVER_NAME "addi_apci_035"
-
+#include "addi-data/addi_eeprom.c"
+#include "addi-data/hwdrv_apci035.c"
#include "addi-data/addi_common.c"
+static const struct addi_board apci035_boardtypes[] = {
+ {
+ .pc_DriverName = "apci035",
+ .i_VendorId = PCI_VENDOR_ID_ADDIDATA,
+ .i_DeviceId = 0x0300,
+ .i_IorangeBase0 = 127,
+ .i_IorangeBase1 = APCI035_ADDRESS_RANGE,
+ .i_PCIEeprom = 1,
+ .pc_EepromChip = ADDIDATA_S5920,
+ .i_NbrAiChannel = 16,
+ .i_NbrAiChannelDiff = 8,
+ .i_AiChannelList = 16,
+ .i_AiMaxdata = 0xff,
+ .pr_AiRangelist = &range_apci035_ai,
+ .i_Timer = 1,
+ .ui_MinAcquisitiontimeNs = 10000,
+ .ui_MinDelaytimeNs = 100000,
+ .interrupt = v_APCI035_Interrupt,
+ .reset = i_APCI035_Reset,
+ .ai_config = i_APCI035_ConfigAnalogInput,
+ .ai_read = i_APCI035_ReadAnalogInput,
+ .timer_config = i_APCI035_ConfigTimerWatchdog,
+ .timer_write = i_APCI035_StartStopWriteTimerWatchdog,
+ .timer_read = i_APCI035_ReadTimerWatchdog,
+ },
+};
+
+static struct comedi_driver apci035_driver = {
+ .driver_name = "addi_apci_035",
+ .module = THIS_MODULE,
+ .auto_attach = addi_auto_attach,
+ .detach = i_ADDI_Detach,
+ .num_names = ARRAY_SIZE(apci035_boardtypes),
+ .board_name = &apci035_boardtypes[0].pc_DriverName,
+ .offset = sizeof(struct addi_board),
+};
+
+static int apci035_pci_probe(struct pci_dev *dev,
+ const struct pci_device_id *ent)
+{
+ return comedi_pci_auto_config(dev, &apci035_driver);
+}
+
+static void apci035_pci_remove(struct pci_dev *dev)
+{
+ comedi_pci_auto_unconfig(dev);
+}
+
+static DEFINE_PCI_DEVICE_TABLE(apci035_pci_table) = {
+ { PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x0300) },
+ { 0 }
+};
+MODULE_DEVICE_TABLE(pci, apci035_pci_table);
+
+static struct pci_driver apci035_pci_driver = {
+ .name = "addi_apci_035",
+ .id_table = apci035_pci_table,
+ .probe = apci035_pci_probe,
+ .remove = apci035_pci_remove,
+};
+module_comedi_pci_driver(apci035_driver, apci035_pci_driver);
+
MODULE_AUTHOR("Comedi http://www.comedi.org");
MODULE_DESCRIPTION("Comedi low-level driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/addi_apci_1032.c b/drivers/staging/comedi/drivers/addi_apci_1032.c
index 7831ce3..7f94242 100644
--- a/drivers/staging/comedi/drivers/addi_apci_1032.c
+++ b/drivers/staging/comedi/drivers/addi_apci_1032.c
@@ -1,8 +1,398 @@
-#define CONFIG_APCI_1032 1
+/*
+ * addi_apci_1032.c
+ * Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module.
+ * Project manager: Eric Stolz
+ *
+ * ADDI-DATA GmbH
+ * Dieselstrasse 3
+ * D-77833 Ottersweier
+ * Tel: +19(0)7223/9493-0
+ * Fax: +49(0)7223/9493-92
+ * http://www.addi-data.com
+ * info@addi-data.com
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
+ * Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * You should also find the complete GPL in the COPYING file accompanying this
+ * source code.
+ */
-#define ADDIDATA_DRIVER_NAME "addi_apci_1032"
+#include "../comedidev.h"
+#include "comedi_fc.h"
+#include "amcc_s5933.h"
-#include "addi-data/addi_common.c"
+/*
+ * I/O Register Map
+ */
+#define APCI1032_DI_REG 0x00
+#define APCI1032_MODE1_REG 0x04
+#define APCI1032_MODE2_REG 0x08
+#define APCI1032_STATUS_REG 0x0c
+#define APCI1032_CTRL_REG 0x10
+#define APCI1032_CTRL_INT_OR (0 << 1)
+#define APCI1032_CTRL_INT_AND (1 << 1)
+#define APCI1032_CTRL_INT_ENA (1 << 2)
+
+struct apci1032_private {
+ unsigned long amcc_iobase; /* base of AMCC I/O registers */
+ unsigned int mode1; /* rising-edge/high level channels */
+ unsigned int mode2; /* falling-edge/low level channels */
+ unsigned int ctrl; /* interrupt mode OR (edge) . AND (level) */
+};
+
+static int apci1032_reset(struct comedi_device *dev)
+{
+ /* disable the interrupts */
+ outl(0x0, dev->iobase + APCI1032_CTRL_REG);
+ /* Reset the interrupt status register */
+ inl(dev->iobase + APCI1032_STATUS_REG);
+ /* Disable the and/or interrupt */
+ outl(0x0, dev->iobase + APCI1032_MODE1_REG);
+ outl(0x0, dev->iobase + APCI1032_MODE2_REG);
+
+ return 0;
+}
+
+/*
+ * Change-Of-State (COS) interrupt configuration
+ *
+ * Channels 0 to 15 are interruptible. These channels can be configured
+ * to generate interrupts based on AND/OR logic for the desired channels.
+ *
+ * OR logic
+ * - reacts to rising or falling edges
+ * - interrupt is generated when any enabled channel
+ * meet the desired interrupt condition
+ *
+ * AND logic
+ * - reacts to changes in level of the selected inputs
+ * - interrupt is generated when all enabled channels
+ * meet the desired interrupt condition
+ * - after an interrupt, a change in level must occur on
+ * the selected inputs to release the IRQ logic
+ *
+ * The COS interrupt must be configured before it can be enabled.
+ *
+ * data[0] : INSN_CONFIG_DIGITAL_TRIG
+ * data[1] : trigger number (= 0)
+ * data[2] : configuration operation:
+ * COMEDI_DIGITAL_TRIG_DISABLE = no interrupts
+ * COMEDI_DIGITAL_TRIG_ENABLE_EDGES = OR (edge) interrupts
+ * COMEDI_DIGITAL_TRIG_ENABLE_LEVELS = AND (level) interrupts
+ * data[3] : left-shift for data[4] and data[5]
+ * data[4] : rising-edge/high level channels
+ * data[5] : falling-edge/low level channels
+ */
+static int apci1032_cos_insn_config(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
+{
+ struct apci1032_private *devpriv = dev->private;
+ unsigned int shift, oldmask;
+
+ switch (data[0]) {
+ case INSN_CONFIG_DIGITAL_TRIG:
+ if (data[1] != 0)
+ return -EINVAL;
+ shift = data[3];
+ oldmask = (1U << shift) - 1;
+ switch (data[2]) {
+ case COMEDI_DIGITAL_TRIG_DISABLE:
+ devpriv->ctrl = 0;
+ devpriv->mode1 = 0;
+ devpriv->mode2 = 0;
+ apci1032_reset(dev);
+ break;
+ case COMEDI_DIGITAL_TRIG_ENABLE_EDGES:
+ if (devpriv->ctrl != (APCI1032_CTRL_INT_ENA |
+ APCI1032_CTRL_INT_OR)) {
+ /* switching to 'OR' mode */
+ devpriv->ctrl = APCI1032_CTRL_INT_ENA |
+ APCI1032_CTRL_INT_OR;
+ /* wipe old channels */
+ devpriv->mode1 = 0;
+ devpriv->mode2 = 0;
+ } else {
+ /* preserve unspecified channels */
+ devpriv->mode1 &= oldmask;
+ devpriv->mode2 &= oldmask;
+ }
+ /* configure specified channels */
+ devpriv->mode1 |= data[4] << shift;
+ devpriv->mode2 |= data[5] << shift;
+ break;
+ case COMEDI_DIGITAL_TRIG_ENABLE_LEVELS:
+ if (devpriv->ctrl != (APCI1032_CTRL_INT_ENA |
+ APCI1032_CTRL_INT_AND)) {
+ /* switching to 'AND' mode */
+ devpriv->ctrl = APCI1032_CTRL_INT_ENA |
+ APCI1032_CTRL_INT_AND;
+ /* wipe old channels */
+ devpriv->mode1 = 0;
+ devpriv->mode2 = 0;
+ } else {
+ /* preserve unspecified channels */
+ devpriv->mode1 &= oldmask;
+ devpriv->mode2 &= oldmask;
+ }
+ /* configure specified channels */
+ devpriv->mode1 |= data[4] << shift;
+ devpriv->mode2 |= data[5] << shift;
+ break;
+ default:
+ return -EINVAL;
+ }
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return insn->n;
+}
+
+static int apci1032_cos_insn_bits(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
+{
+ data[1] = s->state;
+
+ return 0;
+}
+
+static int apci1032_cos_cmdtest(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_cmd *cmd)
+{
+ int err = 0;
+
+ /* Step 1 : check if triggers are trivially valid */
+
+ err |= cfc_check_trigger_src(&cmd->start_src, TRIG_NOW);
+ err |= cfc_check_trigger_src(&cmd->scan_begin_src, TRIG_EXT);
+ err |= cfc_check_trigger_src(&cmd->convert_src, TRIG_FOLLOW);
+ err |= cfc_check_trigger_src(&cmd->scan_end_src, TRIG_COUNT);
+ err |= cfc_check_trigger_src(&cmd->stop_src, TRIG_NONE);
+
+ if (err)
+ return 1;
+
+ /* Step 2a : make sure trigger sources are unique */
+ /* Step 2b : and mutually compatible */
+
+ if (err)
+ return 2;
+
+ /* Step 3: check if arguments are trivially valid */
+
+ err |= cfc_check_trigger_arg_is(&cmd->start_arg, 0);
+ err |= cfc_check_trigger_arg_is(&cmd->scan_begin_arg, 0);
+ err |= cfc_check_trigger_arg_is(&cmd->convert_arg, 0);
+ err |= cfc_check_trigger_arg_is(&cmd->scan_end_arg, 1);
+ err |= cfc_check_trigger_arg_is(&cmd->stop_arg, 0);
+
+ if (err)
+ return 3;
+
+ /* step 4: ignored */
+
+ if (err)
+ return 4;
+
+ return 0;
+}
+
+/*
+ * Change-Of-State (COS) 'do_cmd' operation
+ *
+ * Enable the COS interrupt as configured by apci1032_cos_insn_config().
+ */
+static int apci1032_cos_cmd(struct comedi_device *dev,
+ struct comedi_subdevice *s)
+{
+ struct apci1032_private *devpriv = dev->private;
+
+ if (!devpriv->ctrl) {
+ dev_warn(dev->class_dev,
+ "Interrupts disabled due to mode configuration!\n");
+ return -EINVAL;
+ }
+
+ outl(devpriv->mode1, dev->iobase + APCI1032_MODE1_REG);
+ outl(devpriv->mode2, dev->iobase + APCI1032_MODE2_REG);
+ outl(devpriv->ctrl, dev->iobase + APCI1032_CTRL_REG);
+
+ return 0;
+}
+
+static int apci1032_cos_cancel(struct comedi_device *dev,
+ struct comedi_subdevice *s)
+{
+ return apci1032_reset(dev);
+}
+
+static irqreturn_t apci1032_interrupt(int irq, void *d)
+{
+ struct comedi_device *dev = d;
+ struct apci1032_private *devpriv = dev->private;
+ struct comedi_subdevice *s = dev->read_subdev;
+ unsigned int ctrl;
+
+ /* check interrupt is from this device */
+ if ((inl(devpriv->amcc_iobase + AMCC_OP_REG_INTCSR) &
+ INTCSR_INTR_ASSERTED) == 0)
+ return IRQ_NONE;
+
+ /* check interrupt is enabled */
+ ctrl = inl(dev->iobase + APCI1032_CTRL_REG);
+ if ((ctrl & APCI1032_CTRL_INT_ENA) == 0)
+ return IRQ_HANDLED;
+
+ /* disable the interrupt */
+ outl(ctrl & ~APCI1032_CTRL_INT_ENA, dev->iobase + APCI1032_CTRL_REG);
+
+ s->state = inl(dev->iobase + APCI1032_STATUS_REG) & 0xffff;
+ comedi_buf_put(s->async, s->state);
+ s->async->events |= COMEDI_CB_BLOCK | COMEDI_CB_EOS;
+ comedi_event(dev, s);
+
+ /* enable the interrupt */
+ outl(ctrl, dev->iobase + APCI1032_CTRL_REG);
+
+ return IRQ_HANDLED;
+}
+
+static int apci1032_di_insn_bits(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
+{
+ data[1] = inl(dev->iobase + APCI1032_DI_REG);
+
+ return insn->n;
+}
+
+static int apci1032_auto_attach(struct comedi_device *dev,
+ unsigned long context_unused)
+{
+ struct pci_dev *pcidev = comedi_to_pci_dev(dev);
+ struct apci1032_private *devpriv;
+ struct comedi_subdevice *s;
+ int ret;
+
+ dev->board_name = dev->driver->driver_name;
+
+ devpriv = kzalloc(sizeof(*devpriv), GFP_KERNEL);
+ if (!devpriv)
+ return -ENOMEM;
+ dev->private = devpriv;
+
+ ret = comedi_pci_enable(pcidev, dev->board_name);
+ if (ret)
+ return ret;
+
+ devpriv->amcc_iobase = pci_resource_start(pcidev, 0);
+ dev->iobase = pci_resource_start(pcidev, 1);
+ apci1032_reset(dev);
+ if (pcidev->irq > 0) {
+ ret = request_irq(pcidev->irq, apci1032_interrupt, IRQF_SHARED,
+ dev->board_name, dev);
+ if (ret == 0)
+ dev->irq = pcidev->irq;
+ }
+
+ ret = comedi_alloc_subdevices(dev, 2);
+ if (ret)
+ return ret;
+
+ /* Allocate and Initialise DI Subdevice Structures */
+ s = &dev->subdevices[0];
+ s->type = COMEDI_SUBD_DI;
+ s->subdev_flags = SDF_READABLE;
+ s->n_chan = 32;
+ s->maxdata = 1;
+ s->range_table = &range_digital;
+ s->insn_bits = apci1032_di_insn_bits;
+
+ /* Change-Of-State (COS) interrupt subdevice */
+ s = &dev->subdevices[1];
+ if (dev->irq) {
+ dev->read_subdev = s;
+ s->type = COMEDI_SUBD_DI | SDF_CMD_READ;
+ s->subdev_flags = SDF_READABLE;
+ s->n_chan = 1;
+ s->maxdata = 1;
+ s->range_table = &range_digital;
+ s->insn_config = apci1032_cos_insn_config;
+ s->insn_bits = apci1032_cos_insn_bits;
+ s->do_cmdtest = apci1032_cos_cmdtest;
+ s->do_cmd = apci1032_cos_cmd;
+ s->cancel = apci1032_cos_cancel;
+ } else {
+ s->type = COMEDI_SUBD_UNUSED;
+ }
+
+ return 0;
+}
+
+static void apci1032_detach(struct comedi_device *dev)
+{
+ struct pci_dev *pcidev = comedi_to_pci_dev(dev);
+
+ if (dev->iobase)
+ apci1032_reset(dev);
+ if (dev->irq)
+ free_irq(dev->irq, dev);
+ if (pcidev) {
+ if (dev->iobase)
+ comedi_pci_disable(pcidev);
+ }
+}
+
+static struct comedi_driver apci1032_driver = {
+ .driver_name = "addi_apci_1032",
+ .module = THIS_MODULE,
+ .auto_attach = apci1032_auto_attach,
+ .detach = apci1032_detach,
+};
+
+static int apci1032_pci_probe(struct pci_dev *dev,
+ const struct pci_device_id *ent)
+{
+ return comedi_pci_auto_config(dev, &apci1032_driver);
+}
+
+static void apci1032_pci_remove(struct pci_dev *dev)
+{
+ comedi_pci_auto_unconfig(dev);
+}
+
+static DEFINE_PCI_DEVICE_TABLE(apci1032_pci_table) = {
+ { PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x1003) },
+ { 0 }
+};
+MODULE_DEVICE_TABLE(pci, apci1032_pci_table);
+
+static struct pci_driver apci1032_pci_driver = {
+ .name = "addi_apci_1032",
+ .id_table = apci1032_pci_table,
+ .probe = apci1032_pci_probe,
+ .remove = apci1032_pci_remove,
+};
+module_comedi_pci_driver(apci1032_driver, apci1032_pci_driver);
MODULE_AUTHOR("Comedi http://www.comedi.org");
MODULE_DESCRIPTION("Comedi low-level driver");
diff --git a/drivers/staging/comedi/drivers/addi_apci_1500.c b/drivers/staging/comedi/drivers/addi_apci_1500.c
index bfd84f6..8e686a9 100644
--- a/drivers/staging/comedi/drivers/addi_apci_1500.c
+++ b/drivers/staging/comedi/drivers/addi_apci_1500.c
@@ -1,9 +1,77 @@
-#define CONFIG_APCI_1500 1
+#include "../comedidev.h"
+#include "comedi_fc.h"
+#include "amcc_s5933.h"
-#define ADDIDATA_DRIVER_NAME "addi_apci_1500"
+#include "addi-data/addi_common.h"
+#include "addi-data/addi_eeprom.c"
+#include "addi-data/hwdrv_apci1500.c"
#include "addi-data/addi_common.c"
+static const struct addi_board apci1500_boardtypes[] = {
+ {
+ .pc_DriverName = "apci1500",
+ .i_VendorId = PCI_VENDOR_ID_ADDIDATA_OLD,
+ .i_DeviceId = 0x80fc,
+ .i_IorangeBase0 = 128,
+ .i_IorangeBase1 = APCI1500_ADDRESS_RANGE,
+ .i_IorangeBase2 = 4,
+ .i_PCIEeprom = ADDIDATA_NO_EEPROM,
+ .i_NbrDiChannel = 16,
+ .i_NbrDoChannel = 16,
+ .i_DoMaxdata = 0xffff,
+ .i_Timer = 1,
+ .interrupt = v_APCI1500_Interrupt,
+ .reset = i_APCI1500_Reset,
+ .di_config = i_APCI1500_ConfigDigitalInputEvent,
+ .di_read = i_APCI1500_Initialisation,
+ .di_write = i_APCI1500_StartStopInputEvent,
+ .di_bits = apci1500_di_insn_bits,
+ .do_config = i_APCI1500_ConfigDigitalOutputErrorInterrupt,
+ .do_write = i_APCI1500_WriteDigitalOutput,
+ .do_bits = i_APCI1500_ConfigureInterrupt,
+ .timer_config = i_APCI1500_ConfigCounterTimerWatchdog,
+ .timer_write = i_APCI1500_StartStopTriggerTimerCounterWatchdog,
+ .timer_read = i_APCI1500_ReadInterruptMask,
+ .timer_bits = i_APCI1500_ReadCounterTimerWatchdog,
+ },
+};
+
+static struct comedi_driver apci1500_driver = {
+ .driver_name = "addi_apci_1500",
+ .module = THIS_MODULE,
+ .auto_attach = addi_auto_attach,
+ .detach = i_ADDI_Detach,
+ .num_names = ARRAY_SIZE(apci1500_boardtypes),
+ .board_name = &apci1500_boardtypes[0].pc_DriverName,
+ .offset = sizeof(struct addi_board),
+};
+
+static int apci1500_pci_probe(struct pci_dev *dev,
+ const struct pci_device_id *ent)
+{
+ return comedi_pci_auto_config(dev, &apci1500_driver);
+}
+
+static void apci1500_pci_remove(struct pci_dev *dev)
+{
+ comedi_pci_auto_unconfig(dev);
+}
+
+static DEFINE_PCI_DEVICE_TABLE(apci1500_pci_table) = {
+ { PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA_OLD, 0x80fc) },
+ { 0 }
+};
+MODULE_DEVICE_TABLE(pci, apci1500_pci_table);
+
+static struct pci_driver apci1500_pci_driver = {
+ .name = "addi_apci_1500",
+ .id_table = apci1500_pci_table,
+ .probe = apci1500_pci_probe,
+ .remove = apci1500_pci_remove,
+};
+module_comedi_pci_driver(apci1500_driver, apci1500_pci_driver);
+
MODULE_AUTHOR("Comedi http://www.comedi.org");
MODULE_DESCRIPTION("Comedi low-level driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/addi_apci_1516.c b/drivers/staging/comedi/drivers/addi_apci_1516.c
index a12e2f4..8fef04b 100644
--- a/drivers/staging/comedi/drivers/addi_apci_1516.c
+++ b/drivers/staging/comedi/drivers/addi_apci_1516.c
@@ -1,9 +1,349 @@
-#define CONFIG_APCI_1516 1
+/*
+ * addi_apci_1516.c
+ * Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module.
+ * Project manager: Eric Stolz
+ *
+ * ADDI-DATA GmbH
+ * Dieselstrasse 3
+ * D-77833 Ottersweier
+ * Tel: +19(0)7223/9493-0
+ * Fax: +49(0)7223/9493-92
+ * http://www.addi-data.com
+ * info@addi-data.com
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * You should also find the complete GPL in the COPYING file accompanying
+ * this source code.
+ */
-#define ADDIDATA_DRIVER_NAME "addi_apci_1516"
+#include "../comedidev.h"
+#include "comedi_fc.h"
-#include "addi-data/addi_common.c"
+/*
+ * PCI device ids supported by this driver
+ */
+#define PCI_DEVICE_ID_APCI1016 0x1000
+#define PCI_DEVICE_ID_APCI1516 0x1001
+#define PCI_DEVICE_ID_APCI2016 0x1002
+/*
+ * PCI bar 1 I/O Register map - Digital input/output
+ */
+#define APCI1516_DI_REG 0x00
+#define APCI1516_DO_REG 0x04
+
+/*
+ * PCI bar 2 I/O Register map - Watchdog (APCI-1516 and APCI-2016)
+ */
+#define APCI1516_WDOG_REG 0x00
+#define APCI1516_WDOG_RELOAD_REG 0x04
+#define APCI1516_WDOG_CTRL_REG 0x0c
+#define APCI1516_WDOG_CTRL_ENABLE (1 << 0)
+#define APCI1516_WDOG_CTRL_SW_TRIG (1 << 9)
+#define APCI1516_WDOG_STATUS_REG 0x10
+#define APCI1516_WDOG_STATUS_ENABLED (1 << 0)
+#define APCI1516_WDOG_STATUS_SW_TRIG (1 << 1)
+
+struct apci1516_boardinfo {
+ const char *name;
+ unsigned short device;
+ int di_nchan;
+ int do_nchan;
+ int has_wdog;
+};
+
+static const struct apci1516_boardinfo apci1516_boardtypes[] = {
+ {
+ .name = "apci1016",
+ .device = PCI_DEVICE_ID_APCI1016,
+ .di_nchan = 16,
+ }, {
+ .name = "apci1516",
+ .device = PCI_DEVICE_ID_APCI1516,
+ .di_nchan = 8,
+ .do_nchan = 8,
+ .has_wdog = 1,
+ }, {
+ .name = "apci2016",
+ .device = PCI_DEVICE_ID_APCI2016,
+ .do_nchan = 16,
+ .has_wdog = 1,
+ },
+};
+
+struct apci1516_private {
+ unsigned long wdog_iobase;
+ unsigned int ctrl;
+};
+
+static int apci1516_di_insn_bits(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
+{
+ data[1] = inw(dev->iobase + APCI1516_DI_REG);
+
+ return insn->n;
+}
+
+static int apci1516_do_insn_bits(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
+{
+ unsigned int mask = data[0];
+ unsigned int bits = data[1];
+
+ s->state = inw(dev->iobase + APCI1516_DO_REG);
+ if (mask) {
+ s->state &= ~mask;
+ s->state |= (bits & mask);
+
+ outw(s->state, dev->iobase + APCI1516_DO_REG);
+ }
+
+ data[1] = s->state;
+
+ return insn->n;
+}
+
+/*
+ * The watchdog subdevice is configured with two INSN_CONFIG instructions:
+ *
+ * Enable the watchdog and set the reload timeout:
+ * data[0] = INSN_CONFIG_ARM
+ * data[1] = timeout reload value
+ *
+ * Disable the watchdog:
+ * data[0] = INSN_CONFIG_DISARM
+ */
+static int apci1516_wdog_insn_config(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
+{
+ struct apci1516_private *devpriv = dev->private;
+ unsigned int reload;
+
+ switch (data[0]) {
+ case INSN_CONFIG_ARM:
+ devpriv->ctrl = APCI1516_WDOG_CTRL_ENABLE;
+ reload = data[1] & s->maxdata;
+ outw(reload, devpriv->wdog_iobase + APCI1516_WDOG_RELOAD_REG);
+
+ /* Time base is 20ms, let the user know the timeout */
+ dev_info(dev->class_dev, "watchdog enabled, timeout:%dms\n",
+ 20 * reload + 20);
+ break;
+ case INSN_CONFIG_DISARM:
+ devpriv->ctrl = 0;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ outw(devpriv->ctrl, devpriv->wdog_iobase + APCI1516_WDOG_CTRL_REG);
+
+ return insn->n;
+}
+
+static int apci1516_wdog_insn_write(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
+{
+ struct apci1516_private *devpriv = dev->private;
+ int i;
+
+ if (devpriv->ctrl == 0) {
+ dev_warn(dev->class_dev, "watchdog is disabled\n");
+ return -EINVAL;
+ }
+
+ /* "ping" the watchdog */
+ for (i = 0; i < insn->n; i++) {
+ outw(devpriv->ctrl | APCI1516_WDOG_CTRL_SW_TRIG,
+ devpriv->wdog_iobase + APCI1516_WDOG_CTRL_REG);
+ }
+
+ return insn->n;
+}
+
+static int apci1516_wdog_insn_read(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
+{
+ struct apci1516_private *devpriv = dev->private;
+ int i;
+
+ for (i = 0; i < insn->n; i++)
+ data[i] = inw(devpriv->wdog_iobase + APCI1516_WDOG_STATUS_REG);
+
+ return insn->n;
+}
+
+static int apci1516_reset(struct comedi_device *dev)
+{
+ const struct apci1516_boardinfo *this_board = comedi_board(dev);
+ struct apci1516_private *devpriv = dev->private;
+
+ if (!this_board->has_wdog)
+ return 0;
+
+ outw(0x0, dev->iobase + APCI1516_DO_REG);
+ outw(0x0, devpriv->wdog_iobase + APCI1516_WDOG_CTRL_REG);
+ outw(0x0, devpriv->wdog_iobase + APCI1516_WDOG_RELOAD_REG);
+
+ return 0;
+}
+
+static const void *apci1516_find_boardinfo(struct comedi_device *dev,
+ struct pci_dev *pcidev)
+{
+ const struct apci1516_boardinfo *this_board;
+ int i;
+
+ for (i = 0; i < dev->driver->num_names; i++) {
+ this_board = &apci1516_boardtypes[i];
+ if (this_board->device == pcidev->device)
+ return this_board;
+ }
+ return NULL;
+}
+
+static int apci1516_auto_attach(struct comedi_device *dev,
+ unsigned long context_unused)
+{
+ struct pci_dev *pcidev = comedi_to_pci_dev(dev);
+ const struct apci1516_boardinfo *this_board;
+ struct apci1516_private *devpriv;
+ struct comedi_subdevice *s;
+ int ret;
+
+ this_board = apci1516_find_boardinfo(dev, pcidev);
+ if (!this_board)
+ return -ENODEV;
+ dev->board_ptr = this_board;
+ dev->board_name = this_board->name;
+
+ devpriv = kzalloc(sizeof(*devpriv), GFP_KERNEL);
+ if (!devpriv)
+ return -ENOMEM;
+ dev->private = devpriv;
+
+ ret = comedi_pci_enable(pcidev, dev->board_name);
+ if (ret)
+ return ret;
+
+ dev->iobase = pci_resource_start(pcidev, 1);
+ devpriv->wdog_iobase = pci_resource_start(pcidev, 2);
+
+ ret = comedi_alloc_subdevices(dev, 3);
+ if (ret)
+ return ret;
+
+ /* Initialize the digital input subdevice */
+ s = &dev->subdevices[0];
+ if (this_board->di_nchan) {
+ s->type = COMEDI_SUBD_DI;
+ s->subdev_flags = SDF_READABLE;
+ s->n_chan = this_board->di_nchan;
+ s->maxdata = 1;
+ s->range_table = &range_digital;
+ s->insn_bits = apci1516_di_insn_bits;
+ } else {
+ s->type = COMEDI_SUBD_UNUSED;
+ }
+
+ /* Initialize the digital output subdevice */
+ s = &dev->subdevices[1];
+ if (this_board->do_nchan) {
+ s->type = COMEDI_SUBD_DO;
+ s->subdev_flags = SDF_WRITEABLE;
+ s->n_chan = this_board->do_nchan;
+ s->maxdata = 1;
+ s->range_table = &range_digital;
+ s->insn_bits = apci1516_do_insn_bits;
+ } else {
+ s->type = COMEDI_SUBD_UNUSED;
+ }
+
+ /* Initialize the watchdog subdevice */
+ s = &dev->subdevices[2];
+ if (this_board->has_wdog) {
+ s->type = COMEDI_SUBD_TIMER;
+ s->subdev_flags = SDF_WRITEABLE;
+ s->n_chan = 1;
+ s->maxdata = 0xff;
+ s->insn_write = apci1516_wdog_insn_write;
+ s->insn_read = apci1516_wdog_insn_read;
+ s->insn_config = apci1516_wdog_insn_config;
+ } else {
+ s->type = COMEDI_SUBD_UNUSED;
+ }
+
+ apci1516_reset(dev);
+ return 0;
+}
+
+static void apci1516_detach(struct comedi_device *dev)
+{
+ struct pci_dev *pcidev = comedi_to_pci_dev(dev);
+
+ if (dev->iobase) {
+ apci1516_reset(dev);
+ comedi_pci_disable(pcidev);
+ }
+}
+
+static struct comedi_driver apci1516_driver = {
+ .driver_name = "addi_apci_1516",
+ .module = THIS_MODULE,
+ .auto_attach = apci1516_auto_attach,
+ .detach = apci1516_detach,
+};
+
+static int apci1516_pci_probe(struct pci_dev *dev,
+ const struct pci_device_id *ent)
+{
+ return comedi_pci_auto_config(dev, &apci1516_driver);
+}
+
+static void apci1516_pci_remove(struct pci_dev *dev)
+{
+ comedi_pci_auto_unconfig(dev);
+}
+
+static DEFINE_PCI_DEVICE_TABLE(apci1516_pci_table) = {
+ { PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, PCI_DEVICE_ID_APCI1016) },
+ { PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, PCI_DEVICE_ID_APCI1516) },
+ { PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, PCI_DEVICE_ID_APCI2016) },
+ { 0 }
+};
+MODULE_DEVICE_TABLE(pci, apci1516_pci_table);
+
+static struct pci_driver apci1516_pci_driver = {
+ .name = "addi_apci_1516",
+ .id_table = apci1516_pci_table,
+ .probe = apci1516_pci_probe,
+ .remove = apci1516_pci_remove,
+};
+module_comedi_pci_driver(apci1516_driver, apci1516_pci_driver);
+
+MODULE_DESCRIPTION("ADDI-DATA APCI-1016/1516/2016, 16 channel DIO boards");
MODULE_AUTHOR("Comedi http://www.comedi.org");
-MODULE_DESCRIPTION("Comedi low-level driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/addi_apci_1564.c b/drivers/staging/comedi/drivers/addi_apci_1564.c
index 1b9d598..513e536 100644
--- a/drivers/staging/comedi/drivers/addi_apci_1564.c
+++ b/drivers/staging/comedi/drivers/addi_apci_1564.c
@@ -1,9 +1,74 @@
-#define CONFIG_APCI_1564 1
+#include "../comedidev.h"
+#include "comedi_fc.h"
+#include "amcc_s5933.h"
-#define ADDIDATA_DRIVER_NAME "addi_apci_1564"
+#include "addi-data/addi_common.h"
+#include "addi-data/addi_eeprom.c"
+#include "addi-data/hwdrv_apci1564.c"
#include "addi-data/addi_common.c"
+static const struct addi_board apci1564_boardtypes[] = {
+ {
+ .pc_DriverName = "apci1564",
+ .i_VendorId = PCI_VENDOR_ID_ADDIDATA,
+ .i_DeviceId = 0x1006,
+ .i_IorangeBase0 = 128,
+ .i_IorangeBase1 = APCI1564_ADDRESS_RANGE,
+ .i_PCIEeprom = ADDIDATA_EEPROM,
+ .pc_EepromChip = ADDIDATA_93C76,
+ .i_NbrDiChannel = 32,
+ .i_NbrDoChannel = 32,
+ .i_DoMaxdata = 0xffffffff,
+ .i_Timer = 1,
+ .interrupt = v_APCI1564_Interrupt,
+ .reset = i_APCI1564_Reset,
+ .di_config = i_APCI1564_ConfigDigitalInput,
+ .di_bits = apci1564_di_insn_bits,
+ .do_config = i_APCI1564_ConfigDigitalOutput,
+ .do_bits = apci1564_do_insn_bits,
+ .do_read = i_APCI1564_ReadInterruptStatus,
+ .timer_config = i_APCI1564_ConfigTimerCounterWatchdog,
+ .timer_write = i_APCI1564_StartStopWriteTimerCounterWatchdog,
+ .timer_read = i_APCI1564_ReadTimerCounterWatchdog,
+ },
+};
+
+static struct comedi_driver apci1564_driver = {
+ .driver_name = "addi_apci_1564",
+ .module = THIS_MODULE,
+ .auto_attach = addi_auto_attach,
+ .detach = i_ADDI_Detach,
+ .num_names = ARRAY_SIZE(apci1564_boardtypes),
+ .board_name = &apci1564_boardtypes[0].pc_DriverName,
+ .offset = sizeof(struct addi_board),
+};
+
+static int apci1564_pci_probe(struct pci_dev *dev,
+ const struct pci_device_id *ent)
+{
+ return comedi_pci_auto_config(dev, &apci1564_driver);
+}
+
+static void apci1564_pci_remove(struct pci_dev *dev)
+{
+ comedi_pci_auto_unconfig(dev);
+}
+
+static DEFINE_PCI_DEVICE_TABLE(apci1564_pci_table) = {
+ { PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x1006) },
+ { 0 }
+};
+MODULE_DEVICE_TABLE(pci, apci1564_pci_table);
+
+static struct pci_driver apci1564_pci_driver = {
+ .name = "addi_apci_1564",
+ .id_table = apci1564_pci_table,
+ .probe = apci1564_pci_probe,
+ .remove = apci1564_pci_remove,
+};
+module_comedi_pci_driver(apci1564_driver, apci1564_pci_driver);
+
MODULE_AUTHOR("Comedi http://www.comedi.org");
MODULE_DESCRIPTION("Comedi low-level driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/addi_apci_16xx.c b/drivers/staging/comedi/drivers/addi_apci_16xx.c
index d54218d..ab9a96a 100644
--- a/drivers/staging/comedi/drivers/addi_apci_16xx.c
+++ b/drivers/staging/comedi/drivers/addi_apci_16xx.c
@@ -1,9 +1,77 @@
-#define CONFIG_APCI_16XX 1
+#include "../comedidev.h"
+#include "comedi_fc.h"
+#include "amcc_s5933.h"
-#define ADDIDATA_DRIVER_NAME "addi_apci_16xx"
+#include "addi-data/addi_common.h"
+#include "addi-data/addi_eeprom.c"
+#include "addi-data/hwdrv_apci16xx.c"
#include "addi-data/addi_common.c"
+static const struct addi_board apci16xx_boardtypes[] = {
+ {
+ .pc_DriverName = "apci1648",
+ .i_VendorId = PCI_VENDOR_ID_ADDIDATA,
+ .i_DeviceId = 0x1009,
+ .i_IorangeBase0 = 128,
+ .i_PCIEeprom = ADDIDATA_NO_EEPROM,
+ .i_NbrTTLChannel = 48,
+ .reset = i_APCI16XX_Reset,
+ .ttl_config = i_APCI16XX_InsnConfigInitTTLIO,
+ .ttl_bits = i_APCI16XX_InsnBitsReadTTLIO,
+ .ttl_read = i_APCI16XX_InsnReadTTLIOAllPortValue,
+ .ttl_write = i_APCI16XX_InsnBitsWriteTTLIO,
+ }, {
+ .pc_DriverName = "apci1696",
+ .i_VendorId = PCI_VENDOR_ID_ADDIDATA,
+ .i_DeviceId = 0x100A,
+ .i_IorangeBase0 = 128,
+ .i_PCIEeprom = ADDIDATA_NO_EEPROM,
+ .i_NbrTTLChannel = 96,
+ .reset = i_APCI16XX_Reset,
+ .ttl_config = i_APCI16XX_InsnConfigInitTTLIO,
+ .ttl_bits = i_APCI16XX_InsnBitsReadTTLIO,
+ .ttl_read = i_APCI16XX_InsnReadTTLIOAllPortValue,
+ .ttl_write = i_APCI16XX_InsnBitsWriteTTLIO,
+ },
+};
+
+static struct comedi_driver apci16xx_driver = {
+ .driver_name = "addi_apci_16xx",
+ .module = THIS_MODULE,
+ .auto_attach = addi_auto_attach,
+ .detach = i_ADDI_Detach,
+ .num_names = ARRAY_SIZE(apci16xx_boardtypes),
+ .board_name = &apci16xx_boardtypes[0].pc_DriverName,
+ .offset = sizeof(struct addi_board),
+};
+
+static int apci16xx_pci_probe(struct pci_dev *dev,
+ const struct pci_device_id *ent)
+{
+ return comedi_pci_auto_config(dev, &apci16xx_driver);
+}
+
+static void apci16xx_pci_remove(struct pci_dev *dev)
+{
+ comedi_pci_auto_unconfig(dev);
+}
+
+static DEFINE_PCI_DEVICE_TABLE(apci16xx_pci_table) = {
+ { PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x1009) },
+ { PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x100a) },
+ { 0 }
+};
+MODULE_DEVICE_TABLE(pci, apci16xx_pci_table);
+
+static struct pci_driver apci16xx_pci_driver = {
+ .name = "addi_apci_16xx",
+ .id_table = apci16xx_pci_table,
+ .probe = apci16xx_pci_probe,
+ .remove = apci16xx_pci_remove,
+};
+module_comedi_pci_driver(apci16xx_driver, apci16xx_pci_driver);
+
MODULE_AUTHOR("Comedi http://www.comedi.org");
MODULE_DESCRIPTION("Comedi low-level driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/addi_apci_1710.c b/drivers/staging/comedi/drivers/addi_apci_1710.c
index df6ba8c..152e7ef 100644
--- a/drivers/staging/comedi/drivers/addi_apci_1710.c
+++ b/drivers/staging/comedi/drivers/addi_apci_1710.c
@@ -1,5 +1,152 @@
-#define CONFIG_APCI_1710 1
+#include <asm/i387.h>
-#define ADDIDATA_DRIVER_NAME "addi_apci_1710"
+#include "../comedidev.h"
+#include "comedi_fc.h"
+#include "amcc_s5933.h"
-#include "addi-data/addi_common.c"
+#include "addi-data/addi_common.h"
+
+static void fpu_begin(void)
+{
+ kernel_fpu_begin();
+}
+
+static void fpu_end(void)
+{
+ kernel_fpu_end();
+}
+
+#include "addi-data/addi_eeprom.c"
+#include "addi-data/hwdrv_APCI1710.c"
+
+static const struct addi_board apci1710_boardtypes[] = {
+ {
+ .pc_DriverName = "apci1710",
+ .i_VendorId = PCI_VENDOR_ID_ADDIDATA_OLD,
+ .i_DeviceId = APCI1710_BOARD_DEVICE_ID,
+ .interrupt = v_APCI1710_Interrupt,
+ },
+};
+
+static irqreturn_t v_ADDI_Interrupt(int irq, void *d)
+{
+ struct comedi_device *dev = d;
+ const struct addi_board *this_board = comedi_board(dev);
+
+ this_board->interrupt(irq, d);
+ return IRQ_RETVAL(1);
+}
+
+static const void *apci1710_find_boardinfo(struct comedi_device *dev,
+ struct pci_dev *pcidev)
+{
+ const struct addi_board *this_board;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(apci1710_boardtypes); i++) {
+ this_board = &apci1710_boardtypes[i];
+ if (this_board->i_VendorId == pcidev->vendor &&
+ this_board->i_DeviceId == pcidev->device)
+ return this_board;
+ }
+ return NULL;
+}
+
+static int apci1710_auto_attach(struct comedi_device *dev,
+ unsigned long context_unused)
+{
+ struct pci_dev *pcidev = comedi_to_pci_dev(dev);
+ const struct addi_board *this_board;
+ struct addi_private *devpriv;
+ struct comedi_subdevice *s;
+ int ret;
+
+ this_board = apci1710_find_boardinfo(dev, pcidev);
+ if (!this_board)
+ return -ENODEV;
+ dev->board_ptr = this_board;
+ dev->board_name = this_board->pc_DriverName;
+
+ devpriv = kzalloc(sizeof(*devpriv), GFP_KERNEL);
+ if (!devpriv)
+ return -ENOMEM;
+ dev->private = devpriv;
+
+ ret = comedi_pci_enable(pcidev, dev->board_name);
+ if (ret)
+ return ret;
+
+ if (this_board->i_IorangeBase1)
+ dev->iobase = pci_resource_start(pcidev, 1);
+ else
+ dev->iobase = pci_resource_start(pcidev, 0);
+
+ devpriv->iobase = dev->iobase;
+ devpriv->i_IobaseAmcc = pci_resource_start(pcidev, 0);
+ devpriv->i_IobaseAddon = pci_resource_start(pcidev, 2);
+ devpriv->i_IobaseReserved = pci_resource_start(pcidev, 3);
+
+ if (pcidev->irq > 0) {
+ ret = request_irq(pcidev->irq, v_ADDI_Interrupt, IRQF_SHARED,
+ dev->board_name, dev);
+ if (ret == 0)
+ dev->irq = pcidev->irq;
+ }
+
+ i_ADDI_AttachPCI1710(dev);
+
+ devpriv->s_BoardInfos.ui_Address = pci_resource_start(pcidev, 2);
+
+ i_APCI1710_Reset(dev);
+ return 0;
+}
+
+static void apci1710_detach(struct comedi_device *dev)
+{
+ struct pci_dev *pcidev = comedi_to_pci_dev(dev);
+
+ if (dev->iobase)
+ i_APCI1710_Reset(dev);
+ if (dev->irq)
+ free_irq(dev->irq, dev);
+ if (pcidev) {
+ if (dev->iobase)
+ comedi_pci_disable(pcidev);
+ }
+}
+
+static struct comedi_driver apci1710_driver = {
+ .driver_name = "addi_apci_1710",
+ .module = THIS_MODULE,
+ .auto_attach = apci1710_auto_attach,
+ .detach = apci1710_detach,
+};
+
+static int apci1710_pci_probe(struct pci_dev *dev,
+ const struct pci_device_id *ent)
+{
+ return comedi_pci_auto_config(dev, &apci1710_driver);
+}
+
+static void apci1710_pci_remove(struct pci_dev *dev)
+{
+ comedi_pci_auto_unconfig(dev);
+}
+
+static DEFINE_PCI_DEVICE_TABLE(apci1710_pci_table) = {
+ { PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA_OLD, APCI1710_BOARD_DEVICE_ID) },
+ { 0 }
+};
+MODULE_DEVICE_TABLE(pci, apci1710_pci_table);
+
+static struct pci_driver apci1710_pci_driver = {
+ .name = "addi_apci_1710",
+ .id_table = apci1710_pci_table,
+ .probe = apci1710_pci_probe,
+ .remove = apci1710_pci_remove,
+};
+module_comedi_pci_driver(apci1710_driver, apci1710_pci_driver);
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/addi_apci_2016.c b/drivers/staging/comedi/drivers/addi_apci_2016.c
deleted file mode 100644
index fa50c7b..0000000
--- a/drivers/staging/comedi/drivers/addi_apci_2016.c
+++ /dev/null
@@ -1,9 +0,0 @@
-#define CONFIG_APCI_2016 1
-
-#define ADDIDATA_DRIVER_NAME "addi_apci_2016"
-
-#include "addi-data/addi_common.c"
-
-MODULE_AUTHOR("Comedi http://www.comedi.org");
-MODULE_DESCRIPTION("Comedi low-level driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/addi_apci_2032.c b/drivers/staging/comedi/drivers/addi_apci_2032.c
index 073a8a5..8f8d3e9 100644
--- a/drivers/staging/comedi/drivers/addi_apci_2032.c
+++ b/drivers/staging/comedi/drivers/addi_apci_2032.c
@@ -1,8 +1,383 @@
-#define CONFIG_APCI_2032 1
+/*
+ * addi_apci_2032.c
+ * Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module.
+ * Project manager: Eric Stolz
+ *
+ * ADDI-DATA GmbH
+ * Dieselstrasse 3
+ * D-77833 Ottersweier
+ * Tel: +19(0)7223/9493-0
+ * Fax: +49(0)7223/9493-92
+ * http://www.addi-data.com
+ * info@addi-data.com
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * You should also find the complete GPL in the COPYING file accompanying
+ * this source code.
+ */
-#define ADDIDATA_DRIVER_NAME "addi_apci_2032"
+#include "../comedidev.h"
+#include "comedi_fc.h"
-#include "addi-data/addi_common.c"
+/*
+ * PCI bar 1 I/O Register map
+ */
+#define APCI2032_DO_REG 0x00
+#define APCI2032_INT_CTRL_REG 0x04
+#define APCI2032_INT_CTRL_VCC_ENA (1 << 0)
+#define APCI2032_INT_CTRL_CC_ENA (1 << 1)
+#define APCI2032_INT_STATUS_REG 0x08
+#define APCI2032_INT_STATUS_VCC (1 << 0)
+#define APCI2032_INT_STATUS_CC (1 << 1)
+#define APCI2032_STATUS_REG 0x0c
+#define APCI2032_STATUS_IRQ (1 << 0)
+#define APCI2032_WDOG_REG 0x10
+#define APCI2032_WDOG_RELOAD_REG 0x14
+#define APCI2032_WDOG_TIMEBASE 0x18
+#define APCI2032_WDOG_CTRL_REG 0x1c
+#define APCI2032_WDOG_CTRL_ENABLE (1 << 0)
+#define APCI2032_WDOG_CTRL_SW_TRIG (1 << 9)
+#define APCI2032_WDOG_STATUS_REG 0x20
+#define APCI2032_WDOG_STATUS_ENABLED (1 << 0)
+#define APCI2032_WDOG_STATUS_SW_TRIG (1 << 1)
+
+struct apci2032_private {
+ unsigned int wdog_ctrl;
+};
+
+static int apci2032_do_insn_bits(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
+{
+ unsigned int mask = data[0];
+ unsigned int bits = data[1];
+
+ s->state = inl(dev->iobase + APCI2032_DO_REG);
+ if (mask) {
+ s->state &= ~mask;
+ s->state |= (bits & mask);
+
+ outl(s->state, dev->iobase + APCI2032_DO_REG);
+ }
+
+ data[1] = s->state;
+
+ return insn->n;
+}
+
+/*
+ * The watchdog subdevice is configured with two INSN_CONFIG instructions:
+ *
+ * Enable the watchdog and set the reload timeout:
+ * data[0] = INSN_CONFIG_ARM
+ * data[1] = timeout reload value
+ *
+ * Disable the watchdog:
+ * data[0] = INSN_CONFIG_DISARM
+ */
+static int apci2032_wdog_insn_config(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
+{
+ struct apci2032_private *devpriv = dev->private;
+ unsigned int reload;
+
+ switch (data[0]) {
+ case INSN_CONFIG_ARM:
+ devpriv->wdog_ctrl = APCI2032_WDOG_CTRL_ENABLE;
+ reload = data[1] & s->maxdata;
+ outw(reload, dev->iobase + APCI2032_WDOG_RELOAD_REG);
+
+ /* Time base is 20ms, let the user know the timeout */
+ dev_info(dev->class_dev, "watchdog enabled, timeout:%dms\n",
+ 20 * reload + 20);
+ break;
+ case INSN_CONFIG_DISARM:
+ devpriv->wdog_ctrl = 0;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ outw(devpriv->wdog_ctrl, dev->iobase + APCI2032_WDOG_CTRL_REG);
+
+ return insn->n;
+}
+
+static int apci2032_wdog_insn_write(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
+{
+ struct apci2032_private *devpriv = dev->private;
+ int i;
+
+ if (devpriv->wdog_ctrl == 0) {
+ dev_warn(dev->class_dev, "watchdog is disabled\n");
+ return -EINVAL;
+ }
+
+ /* "ping" the watchdog */
+ for (i = 0; i < insn->n; i++) {
+ outw(devpriv->wdog_ctrl | APCI2032_WDOG_CTRL_SW_TRIG,
+ dev->iobase + APCI2032_WDOG_CTRL_REG);
+ }
+
+ return insn->n;
+}
+
+static int apci2032_wdog_insn_read(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
+{
+ int i;
+
+ for (i = 0; i < insn->n; i++)
+ data[i] = inl(dev->iobase + APCI2032_WDOG_STATUS_REG);
+
+ return insn->n;
+}
+
+static int apci2032_int_insn_bits(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
+{
+ data[1] = s->state;
+ return insn->n;
+}
+
+static int apci2032_int_cmdtest(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_cmd *cmd)
+{
+ int err = 0;
+
+ /* Step 1 : check if triggers are trivially valid */
+
+ err |= cfc_check_trigger_src(&cmd->start_src, TRIG_NOW);
+ err |= cfc_check_trigger_src(&cmd->scan_begin_src, TRIG_OTHER);
+ err |= cfc_check_trigger_src(&cmd->convert_src, TRIG_FOLLOW);
+ err |= cfc_check_trigger_src(&cmd->scan_end_src, TRIG_COUNT);
+ err |= cfc_check_trigger_src(&cmd->stop_src, TRIG_NONE);
+
+ if (err)
+ return 1;
+
+ /* Step 2a : make sure trigger sources are unique */
+ /* Step 2b : and mutually compatible */
+
+ if (err)
+ return 2;
+
+ /* Step 3: check if arguments are trivially valid */
+
+ err |= cfc_check_trigger_arg_is(&cmd->start_arg, 0);
+
+ /*
+ * 0 == no trigger
+ * 1 == trigger on VCC interrupt
+ * 2 == trigger on CC interrupt
+ * 3 == trigger on either VCC or CC interrupt
+ */
+ err |= cfc_check_trigger_arg_max(&cmd->scan_begin_arg, 3);
+
+ err |= cfc_check_trigger_arg_is(&cmd->convert_arg, 0);
+ err |= cfc_check_trigger_arg_is(&cmd->scan_end_arg, 1);
+ err |= cfc_check_trigger_arg_is(&cmd->stop_arg, 0);
+
+ if (err)
+ return 3;
+
+ /* step 4: ignored */
+
+ if (err)
+ return 4;
+
+ return 0;
+}
+
+static int apci2032_int_cmd(struct comedi_device *dev,
+ struct comedi_subdevice *s)
+{
+ struct comedi_cmd *cmd = &s->async->cmd;
+
+ outl(cmd->scan_begin_arg, dev->iobase + APCI2032_INT_CTRL_REG);
+
+ return 0;
+}
+
+static int apci2032_int_cancel(struct comedi_device *dev,
+ struct comedi_subdevice *s)
+{
+ outl(0x0, dev->iobase + APCI2032_INT_CTRL_REG);
+
+ return 0;
+}
+
+static irqreturn_t apci2032_interrupt(int irq, void *d)
+{
+ struct comedi_device *dev = d;
+ struct comedi_subdevice *s = dev->read_subdev;
+ unsigned int val;
+
+ /* Check if VCC OR CC interrupt has occurred */
+ val = inl(dev->iobase + APCI2032_STATUS_REG) & APCI2032_STATUS_IRQ;
+ if (!val)
+ return IRQ_NONE;
+
+ s->state = inl(dev->iobase + APCI2032_INT_STATUS_REG);
+ outl(0x0, dev->iobase + APCI2032_INT_CTRL_REG);
+
+ comedi_buf_put(s->async, s->state);
+ s->async->events |= COMEDI_CB_BLOCK | COMEDI_CB_EOS;
+ comedi_event(dev, s);
+
+ return IRQ_HANDLED;
+}
+
+static int apci2032_reset(struct comedi_device *dev)
+{
+ outl(0x0, dev->iobase + APCI2032_DO_REG);
+ outl(0x0, dev->iobase + APCI2032_INT_CTRL_REG);
+ outl(0x0, dev->iobase + APCI2032_WDOG_CTRL_REG);
+ outl(0x0, dev->iobase + APCI2032_WDOG_RELOAD_REG);
+
+ return 0;
+}
+
+static int apci2032_auto_attach(struct comedi_device *dev,
+ unsigned long context_unused)
+{
+ struct pci_dev *pcidev = comedi_to_pci_dev(dev);
+ struct apci2032_private *devpriv;
+ struct comedi_subdevice *s;
+ int ret;
+
+ dev->board_name = dev->driver->driver_name;
+
+ devpriv = kzalloc(sizeof(*devpriv), GFP_KERNEL);
+ if (!devpriv)
+ return -ENOMEM;
+ dev->private = devpriv;
+
+ ret = comedi_pci_enable(pcidev, dev->board_name);
+ if (ret)
+ return ret;
+ dev->iobase = pci_resource_start(pcidev, 1);
+
+ if (pcidev->irq > 0) {
+ ret = request_irq(pcidev->irq, apci2032_interrupt,
+ IRQF_SHARED, dev->board_name, dev);
+ if (ret == 0)
+ dev->irq = pcidev->irq;
+ }
+
+ ret = comedi_alloc_subdevices(dev, 3);
+ if (ret)
+ return ret;
+
+ /* Initialize the digital output subdevice */
+ s = &dev->subdevices[0];
+ s->type = COMEDI_SUBD_DO;
+ s->subdev_flags = SDF_WRITEABLE;
+ s->n_chan = 32;
+ s->maxdata = 1;
+ s->range_table = &range_digital;
+ s->insn_bits = apci2032_do_insn_bits;
+
+ /* Initialize the watchdog subdevice */
+ s = &dev->subdevices[1];
+ s->type = COMEDI_SUBD_TIMER;
+ s->subdev_flags = SDF_WRITEABLE;
+ s->n_chan = 1;
+ s->maxdata = 0xff;
+ s->insn_write = apci2032_wdog_insn_write;
+ s->insn_read = apci2032_wdog_insn_read;
+ s->insn_config = apci2032_wdog_insn_config;
+
+ /* Initialize the interrupt subdevice */
+ s = &dev->subdevices[2];
+ if (dev->irq) {
+ dev->read_subdev = s;
+ s->type = COMEDI_SUBD_DI | SDF_CMD_READ;
+ s->subdev_flags = SDF_READABLE;
+ s->n_chan = 1;
+ s->maxdata = 1;
+ s->range_table = &range_digital;
+ s->insn_bits = apci2032_int_insn_bits;
+ s->do_cmdtest = apci2032_int_cmdtest;
+ s->do_cmd = apci2032_int_cmd;
+ s->cancel = apci2032_int_cancel;
+ } else {
+ s->type = COMEDI_SUBD_UNUSED;
+ }
+
+ apci2032_reset(dev);
+ return 0;
+}
+
+static void apci2032_detach(struct comedi_device *dev)
+{
+ struct pci_dev *pcidev = comedi_to_pci_dev(dev);
+
+ if (dev->iobase)
+ apci2032_reset(dev);
+ if (dev->irq)
+ free_irq(dev->irq, dev);
+ if (pcidev) {
+ if (dev->iobase)
+ comedi_pci_disable(pcidev);
+ }
+}
+
+static struct comedi_driver apci2032_driver = {
+ .driver_name = "addi_apci_2032",
+ .module = THIS_MODULE,
+ .auto_attach = apci2032_auto_attach,
+ .detach = apci2032_detach,
+};
+
+static int apci2032_pci_probe(struct pci_dev *dev,
+ const struct pci_device_id *ent)
+{
+ return comedi_pci_auto_config(dev, &apci2032_driver);
+}
+
+static void apci2032_pci_remove(struct pci_dev *dev)
+{
+ comedi_pci_auto_unconfig(dev);
+}
+
+static DEFINE_PCI_DEVICE_TABLE(apci2032_pci_table) = {
+ { PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x1004) },
+ { 0 }
+};
+MODULE_DEVICE_TABLE(pci, apci2032_pci_table);
+
+static struct pci_driver apci2032_pci_driver = {
+ .name = "addi_apci_2032",
+ .id_table = apci2032_pci_table,
+ .probe = apci2032_pci_probe,
+ .remove = apci2032_pci_remove,
+};
+module_comedi_pci_driver(apci2032_driver, apci2032_pci_driver);
MODULE_AUTHOR("Comedi http://www.comedi.org");
MODULE_DESCRIPTION("Comedi low-level driver");
diff --git a/drivers/staging/comedi/drivers/addi_apci_2200.c b/drivers/staging/comedi/drivers/addi_apci_2200.c
index adfbb5d..7c2c5db 100644
--- a/drivers/staging/comedi/drivers/addi_apci_2200.c
+++ b/drivers/staging/comedi/drivers/addi_apci_2200.c
@@ -1,9 +1,69 @@
-#define CONFIG_APCI_2200 1
+#include "../comedidev.h"
+#include "comedi_fc.h"
+#include "amcc_s5933.h"
-#define ADDIDATA_DRIVER_NAME "addi_apci_2200"
+#include "addi-data/addi_common.h"
+#include "addi-data/addi_eeprom.c"
+#include "addi-data/hwdrv_apci2200.c"
#include "addi-data/addi_common.c"
+static const struct addi_board apci2200_boardtypes[] = {
+ {
+ .pc_DriverName = "apci2200",
+ .i_VendorId = PCI_VENDOR_ID_ADDIDATA,
+ .i_DeviceId = 0x1005,
+ .i_IorangeBase0 = 4,
+ .i_IorangeBase1 = APCI2200_ADDRESS_RANGE,
+ .i_PCIEeprom = ADDIDATA_EEPROM,
+ .pc_EepromChip = ADDIDATA_93C76,
+ .i_NbrDiChannel = 8,
+ .i_NbrDoChannel = 16,
+ .i_Timer = 1,
+ .reset = i_APCI2200_Reset,
+ .di_bits = apci2200_di_insn_bits,
+ .do_bits = apci2200_do_insn_bits,
+ .timer_config = i_APCI2200_ConfigWatchdog,
+ .timer_write = i_APCI2200_StartStopWriteWatchdog,
+ .timer_read = i_APCI2200_ReadWatchdog,
+ },
+};
+
+static struct comedi_driver apci2200_driver = {
+ .driver_name = "addi_apci_2200",
+ .module = THIS_MODULE,
+ .auto_attach = addi_auto_attach,
+ .detach = i_ADDI_Detach,
+ .num_names = ARRAY_SIZE(apci2200_boardtypes),
+ .board_name = &apci2200_boardtypes[0].pc_DriverName,
+ .offset = sizeof(struct addi_board),
+};
+
+static int apci2200_pci_probe(struct pci_dev *dev,
+ const struct pci_device_id *ent)
+{
+ return comedi_pci_auto_config(dev, &apci2200_driver);
+}
+
+static void apci2200_pci_remove(struct pci_dev *dev)
+{
+ comedi_pci_auto_unconfig(dev);
+}
+
+static DEFINE_PCI_DEVICE_TABLE(apci2200_pci_table) = {
+ { PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x1005) },
+ { 0 }
+};
+MODULE_DEVICE_TABLE(pci, apci2200_pci_table);
+
+static struct pci_driver apci2200_pci_driver = {
+ .name = "addi_apci_2200",
+ .id_table = apci2200_pci_table,
+ .probe = apci2200_pci_probe,
+ .remove = apci2200_pci_remove,
+};
+module_comedi_pci_driver(apci2200_driver, apci2200_pci_driver);
+
MODULE_AUTHOR("Comedi http://www.comedi.org");
MODULE_DESCRIPTION("Comedi low-level driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/addi_apci_3001.c b/drivers/staging/comedi/drivers/addi_apci_3001.c
deleted file mode 100644
index 00ac762..0000000
--- a/drivers/staging/comedi/drivers/addi_apci_3001.c
+++ /dev/null
@@ -1,9 +0,0 @@
-#define CONFIG_APCI_3001 1
-
-#define ADDIDATA_DRIVER_NAME "addi_apci_3001"
-
-#include "addi-data/addi_common.c"
-
-MODULE_AUTHOR("Comedi http://www.comedi.org");
-MODULE_DESCRIPTION("Comedi low-level driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/addi_apci_3120.c b/drivers/staging/comedi/drivers/addi_apci_3120.c
index c355158..fec2962 100644
--- a/drivers/staging/comedi/drivers/addi_apci_3120.c
+++ b/drivers/staging/comedi/drivers/addi_apci_3120.c
@@ -1,8 +1,275 @@
-#define CONFIG_APCI_3120 1
+#include "../comedidev.h"
+#include "comedi_fc.h"
+#include "amcc_s5933.h"
-#define ADDIDATA_DRIVER_NAME "addi_apci_3120"
+#include "addi-data/addi_common.h"
-#include "addi-data/addi_common.c"
+#include "addi-data/hwdrv_apci3120.c"
+
+static const struct addi_board apci3120_boardtypes[] = {
+ {
+ .pc_DriverName = "apci3120",
+ .i_VendorId = PCI_VENDOR_ID_ADDIDATA_OLD,
+ .i_DeviceId = 0x818D,
+ .i_NbrAiChannel = 16,
+ .i_NbrAiChannelDiff = 8,
+ .i_AiChannelList = 16,
+ .i_NbrAoChannel = 8,
+ .i_AiMaxdata = 0xffff,
+ .i_AoMaxdata = 0x3fff,
+ .i_NbrDiChannel = 4,
+ .i_NbrDoChannel = 4,
+ .i_DoMaxdata = 0x0f,
+ .interrupt = v_APCI3120_Interrupt,
+ }, {
+ .pc_DriverName = "apci3001",
+ .i_VendorId = PCI_VENDOR_ID_ADDIDATA_OLD,
+ .i_DeviceId = 0x828D,
+ .i_NbrAiChannel = 16,
+ .i_NbrAiChannelDiff = 8,
+ .i_AiChannelList = 16,
+ .i_AiMaxdata = 0xfff,
+ .i_NbrDiChannel = 4,
+ .i_NbrDoChannel = 4,
+ .i_DoMaxdata = 0x0f,
+ .interrupt = v_APCI3120_Interrupt,
+ },
+};
+
+static irqreturn_t v_ADDI_Interrupt(int irq, void *d)
+{
+ struct comedi_device *dev = d;
+ const struct addi_board *this_board = comedi_board(dev);
+
+ this_board->interrupt(irq, d);
+ return IRQ_RETVAL(1);
+}
+
+static const void *apci3120_find_boardinfo(struct comedi_device *dev,
+ struct pci_dev *pcidev)
+{
+ const struct addi_board *this_board;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(apci3120_boardtypes); i++) {
+ this_board = &apci3120_boardtypes[i];
+ if (this_board->i_VendorId == pcidev->vendor &&
+ this_board->i_DeviceId == pcidev->device)
+ return this_board;
+ }
+ return NULL;
+}
+
+static int apci3120_auto_attach(struct comedi_device *dev,
+ unsigned long context_unused)
+{
+ struct pci_dev *pcidev = comedi_to_pci_dev(dev);
+ const struct addi_board *this_board;
+ struct addi_private *devpriv;
+ struct comedi_subdevice *s;
+ int ret, pages, i;
+
+ this_board = apci3120_find_boardinfo(dev, pcidev);
+ if (!this_board)
+ return -ENODEV;
+ dev->board_ptr = this_board;
+ dev->board_name = this_board->pc_DriverName;
+
+ devpriv = kzalloc(sizeof(*devpriv), GFP_KERNEL);
+ if (!devpriv)
+ return -ENOMEM;
+ dev->private = devpriv;
+
+ ret = comedi_pci_enable(pcidev, dev->board_name);
+ if (ret)
+ return ret;
+ pci_set_master(pcidev);
+
+ dev->iobase = pci_resource_start(pcidev, 1);
+ devpriv->iobase = dev->iobase;
+ devpriv->i_IobaseAmcc = pci_resource_start(pcidev, 0);
+ devpriv->i_IobaseAddon = pci_resource_start(pcidev, 2);
+ devpriv->i_IobaseReserved = pci_resource_start(pcidev, 3);
+
+ if (pcidev->irq > 0) {
+ ret = request_irq(pcidev->irq, v_ADDI_Interrupt, IRQF_SHARED,
+ dev->board_name, dev);
+ if (ret == 0)
+ dev->irq = pcidev->irq;
+ }
+
+ devpriv->us_UseDma = ADDI_ENABLE;
+
+ /* Allocate DMA buffers */
+ devpriv->b_DmaDoubleBuffer = 0;
+ for (i = 0; i < 2; i++) {
+ for (pages = 4; pages >= 0; pages--) {
+ devpriv->ul_DmaBufferVirtual[i] =
+ (void *) __get_free_pages(GFP_KERNEL, pages);
+
+ if (devpriv->ul_DmaBufferVirtual[i])
+ break;
+ }
+ if (devpriv->ul_DmaBufferVirtual[i]) {
+ devpriv->ui_DmaBufferPages[i] = pages;
+ devpriv->ui_DmaBufferSize[i] = PAGE_SIZE * pages;
+ devpriv->ui_DmaBufferSamples[i] =
+ devpriv->ui_DmaBufferSize[i] >> 1;
+ devpriv->ul_DmaBufferHw[i] =
+ virt_to_bus((void *)devpriv->
+ ul_DmaBufferVirtual[i]);
+ }
+ }
+ if (!devpriv->ul_DmaBufferVirtual[0])
+ devpriv->us_UseDma = ADDI_DISABLE;
+
+ if (devpriv->ul_DmaBufferVirtual[1])
+ devpriv->b_DmaDoubleBuffer = 1;
+
+ ret = comedi_alloc_subdevices(dev, 5);
+ if (ret)
+ return ret;
+
+ /* Allocate and Initialise AI Subdevice Structures */
+ s = &dev->subdevices[0];
+ dev->read_subdev = s;
+ s->type = COMEDI_SUBD_AI;
+ s->subdev_flags =
+ SDF_READABLE | SDF_COMMON | SDF_GROUND
+ | SDF_DIFF;
+ if (this_board->i_NbrAiChannel) {
+ s->n_chan = this_board->i_NbrAiChannel;
+ devpriv->b_SingelDiff = 0;
+ } else {
+ s->n_chan = this_board->i_NbrAiChannelDiff;
+ devpriv->b_SingelDiff = 1;
+ }
+ s->maxdata = this_board->i_AiMaxdata;
+ s->len_chanlist = this_board->i_AiChannelList;
+ s->range_table = &range_apci3120_ai;
+
+ /* Set the initialisation flag */
+ devpriv->b_AiInitialisation = 1;
+
+ s->insn_config = i_APCI3120_InsnConfigAnalogInput;
+ s->insn_read = i_APCI3120_InsnReadAnalogInput;
+ s->do_cmdtest = i_APCI3120_CommandTestAnalogInput;
+ s->do_cmd = i_APCI3120_CommandAnalogInput;
+ s->cancel = i_APCI3120_StopCyclicAcquisition;
+
+ /* Allocate and Initialise AO Subdevice Structures */
+ s = &dev->subdevices[1];
+ if (this_board->i_NbrAoChannel) {
+ s->type = COMEDI_SUBD_AO;
+ s->subdev_flags = SDF_WRITEABLE | SDF_GROUND | SDF_COMMON;
+ s->n_chan = this_board->i_NbrAoChannel;
+ s->maxdata = this_board->i_AoMaxdata;
+ s->len_chanlist = this_board->i_NbrAoChannel;
+ s->range_table = &range_apci3120_ao;
+ s->insn_write = i_APCI3120_InsnWriteAnalogOutput;
+ } else {
+ s->type = COMEDI_SUBD_UNUSED;
+ }
+
+ /* Allocate and Initialise DI Subdevice Structures */
+ s = &dev->subdevices[2];
+ s->type = COMEDI_SUBD_DI;
+ s->subdev_flags = SDF_READABLE | SDF_GROUND | SDF_COMMON;
+ s->n_chan = this_board->i_NbrDiChannel;
+ s->maxdata = 1;
+ s->len_chanlist = this_board->i_NbrDiChannel;
+ s->range_table = &range_digital;
+ s->io_bits = 0; /* all bits input */
+ s->insn_bits = apci3120_di_insn_bits;
+
+ /* Allocate and Initialise DO Subdevice Structures */
+ s = &dev->subdevices[3];
+ s->type = COMEDI_SUBD_DO;
+ s->subdev_flags =
+ SDF_READABLE | SDF_WRITEABLE | SDF_GROUND | SDF_COMMON;
+ s->n_chan = this_board->i_NbrDoChannel;
+ s->maxdata = this_board->i_DoMaxdata;
+ s->len_chanlist = this_board->i_NbrDoChannel;
+ s->range_table = &range_digital;
+ s->io_bits = 0xf; /* all bits output */
+ s->insn_bits = apci3120_do_insn_bits;
+
+ /* Allocate and Initialise Timer Subdevice Structures */
+ s = &dev->subdevices[4];
+ s->type = COMEDI_SUBD_TIMER;
+ s->subdev_flags = SDF_WRITEABLE | SDF_GROUND | SDF_COMMON;
+ s->n_chan = 1;
+ s->maxdata = 0;
+ s->len_chanlist = 1;
+ s->range_table = &range_digital;
+
+ s->insn_write = i_APCI3120_InsnWriteTimer;
+ s->insn_read = i_APCI3120_InsnReadTimer;
+ s->insn_config = i_APCI3120_InsnConfigTimer;
+
+ i_APCI3120_Reset(dev);
+ return 0;
+}
+
+static void apci3120_detach(struct comedi_device *dev)
+{
+ struct pci_dev *pcidev = comedi_to_pci_dev(dev);
+ struct addi_private *devpriv = dev->private;
+
+ if (devpriv) {
+ if (dev->iobase)
+ i_APCI3120_Reset(dev);
+ if (dev->irq)
+ free_irq(dev->irq, dev);
+ if (devpriv->ul_DmaBufferVirtual[0]) {
+ free_pages((unsigned long)devpriv->
+ ul_DmaBufferVirtual[0],
+ devpriv->ui_DmaBufferPages[0]);
+ }
+ if (devpriv->ul_DmaBufferVirtual[1]) {
+ free_pages((unsigned long)devpriv->
+ ul_DmaBufferVirtual[1],
+ devpriv->ui_DmaBufferPages[1]);
+ }
+ }
+ if (pcidev) {
+ if (dev->iobase)
+ comedi_pci_disable(pcidev);
+ }
+}
+
+static struct comedi_driver apci3120_driver = {
+ .driver_name = "addi_apci_3120",
+ .module = THIS_MODULE,
+ .auto_attach = apci3120_auto_attach,
+ .detach = apci3120_detach,
+};
+
+static int apci3120_pci_probe(struct pci_dev *dev,
+ const struct pci_device_id *ent)
+{
+ return comedi_pci_auto_config(dev, &apci3120_driver);
+}
+
+static void apci3120_pci_remove(struct pci_dev *dev)
+{
+ comedi_pci_auto_unconfig(dev);
+}
+
+static DEFINE_PCI_DEVICE_TABLE(apci3120_pci_table) = {
+ { PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA_OLD, 0x818d) },
+ { PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA_OLD, 0x828d) },
+ { 0 }
+};
+MODULE_DEVICE_TABLE(pci, apci3120_pci_table);
+
+static struct pci_driver apci3120_pci_driver = {
+ .name = "addi_apci_3120",
+ .id_table = apci3120_pci_table,
+ .probe = apci3120_pci_probe,
+ .remove = apci3120_pci_remove,
+};
+module_comedi_pci_driver(apci3120_driver, apci3120_pci_driver);
MODULE_AUTHOR("Comedi http://www.comedi.org");
MODULE_DESCRIPTION("Comedi low-level driver");
diff --git a/drivers/staging/comedi/drivers/addi_apci_3200.c b/drivers/staging/comedi/drivers/addi_apci_3200.c
index 1593139..9085b77 100644
--- a/drivers/staging/comedi/drivers/addi_apci_3200.c
+++ b/drivers/staging/comedi/drivers/addi_apci_3200.c
@@ -1,5 +1,120 @@
-#define CONFIG_APCI_3200 1
+#include <asm/i387.h>
-#define ADDIDATA_DRIVER_NAME "addi_apci_3200"
+#include "../comedidev.h"
+#include "comedi_fc.h"
+#include "amcc_s5933.h"
+#include "addi-data/addi_common.h"
+
+static void fpu_begin(void)
+{
+ kernel_fpu_begin();
+}
+
+static void fpu_end(void)
+{
+ kernel_fpu_end();
+}
+
+#include "addi-data/addi_eeprom.c"
+#include "addi-data/hwdrv_apci3200.c"
#include "addi-data/addi_common.c"
+
+static const struct addi_board apci3200_boardtypes[] = {
+ {
+ .pc_DriverName = "apci3200",
+ .i_VendorId = PCI_VENDOR_ID_ADDIDATA,
+ .i_DeviceId = 0x3000,
+ .i_IorangeBase0 = 128,
+ .i_IorangeBase1 = 256,
+ .i_IorangeBase2 = 4,
+ .i_IorangeBase3 = 4,
+ .i_PCIEeprom = ADDIDATA_EEPROM,
+ .pc_EepromChip = ADDIDATA_S5920,
+ .i_NbrAiChannel = 16,
+ .i_NbrAiChannelDiff = 8,
+ .i_AiChannelList = 16,
+ .i_AiMaxdata = 0x3ffff,
+ .pr_AiRangelist = &range_apci3200_ai,
+ .i_NbrDiChannel = 4,
+ .i_NbrDoChannel = 4,
+ .ui_MinAcquisitiontimeNs = 10000,
+ .ui_MinDelaytimeNs = 100000,
+ .interrupt = v_APCI3200_Interrupt,
+ .reset = i_APCI3200_Reset,
+ .ai_config = i_APCI3200_ConfigAnalogInput,
+ .ai_read = i_APCI3200_ReadAnalogInput,
+ .ai_write = i_APCI3200_InsnWriteReleaseAnalogInput,
+ .ai_bits = i_APCI3200_InsnBits_AnalogInput_Test,
+ .ai_cmdtest = i_APCI3200_CommandTestAnalogInput,
+ .ai_cmd = i_APCI3200_CommandAnalogInput,
+ .ai_cancel = i_APCI3200_StopCyclicAcquisition,
+ .di_bits = apci3200_di_insn_bits,
+ .do_bits = apci3200_do_insn_bits,
+ }, {
+ .pc_DriverName = "apci3300",
+ .i_VendorId = PCI_VENDOR_ID_ADDIDATA,
+ .i_DeviceId = 0x3007,
+ .i_IorangeBase0 = 128,
+ .i_IorangeBase1 = 256,
+ .i_IorangeBase2 = 4,
+ .i_IorangeBase3 = 4,
+ .i_PCIEeprom = ADDIDATA_EEPROM,
+ .pc_EepromChip = ADDIDATA_S5920,
+ .i_NbrAiChannelDiff = 8,
+ .i_AiChannelList = 8,
+ .i_AiMaxdata = 0x3ffff,
+ .pr_AiRangelist = &range_apci3300_ai,
+ .i_NbrDiChannel = 4,
+ .i_NbrDoChannel = 4,
+ .ui_MinAcquisitiontimeNs = 10000,
+ .ui_MinDelaytimeNs = 100000,
+ .interrupt = v_APCI3200_Interrupt,
+ .reset = i_APCI3200_Reset,
+ .ai_config = i_APCI3200_ConfigAnalogInput,
+ .ai_read = i_APCI3200_ReadAnalogInput,
+ .ai_write = i_APCI3200_InsnWriteReleaseAnalogInput,
+ .ai_bits = i_APCI3200_InsnBits_AnalogInput_Test,
+ .ai_cmdtest = i_APCI3200_CommandTestAnalogInput,
+ .ai_cmd = i_APCI3200_CommandAnalogInput,
+ .ai_cancel = i_APCI3200_StopCyclicAcquisition,
+ .di_bits = apci3200_di_insn_bits,
+ .do_bits = apci3200_do_insn_bits,
+ },
+};
+
+static DEFINE_PCI_DEVICE_TABLE(apci3200_pci_table) = {
+ { PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x3000) },
+ { PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x3007) },
+ { 0 }
+};
+MODULE_DEVICE_TABLE(pci, apci3200_pci_table);
+
+static struct comedi_driver apci3200_driver = {
+ .driver_name = "addi_apci_3200",
+ .module = THIS_MODULE,
+ .auto_attach = addi_auto_attach,
+ .detach = i_ADDI_Detach,
+ .num_names = ARRAY_SIZE(apci3200_boardtypes),
+ .board_name = &apci3200_boardtypes[0].pc_DriverName,
+ .offset = sizeof(struct addi_board),
+};
+
+static int apci3200_pci_probe(struct pci_dev *dev,
+ const struct pci_device_id *ent)
+{
+ return comedi_pci_auto_config(dev, &apci3200_driver);
+}
+
+static void apci3200_pci_remove(struct pci_dev *dev)
+{
+ comedi_pci_auto_unconfig(dev);
+}
+
+static struct pci_driver apci3200_pci_driver = {
+ .name = "addi_apci_3200",
+ .id_table = apci3200_pci_table,
+ .probe = apci3200_pci_probe,
+ .remove = apci3200_pci_remove,
+};
+module_comedi_pci_driver(apci3200_driver, apci3200_pci_driver);
diff --git a/drivers/staging/comedi/drivers/addi_apci_3300.c b/drivers/staging/comedi/drivers/addi_apci_3300.c
deleted file mode 100644
index 733c69a..0000000
--- a/drivers/staging/comedi/drivers/addi_apci_3300.c
+++ /dev/null
@@ -1,5 +0,0 @@
-#define CONFIG_APCI_3300 1
-
-#define ADDIDATA_DRIVER_NAME "addi_apci_3300"
-
-#include "addi-data/addi_common.c"
diff --git a/drivers/staging/comedi/drivers/addi_apci_3501.c b/drivers/staging/comedi/drivers/addi_apci_3501.c
index dd2c1d3..ed297de 100644
--- a/drivers/staging/comedi/drivers/addi_apci_3501.c
+++ b/drivers/staging/comedi/drivers/addi_apci_3501.c
@@ -1,9 +1,75 @@
-#define CONFIG_APCI_3501 1
+#include "../comedidev.h"
+#include "comedi_fc.h"
+#include "amcc_s5933.h"
-#define ADDIDATA_DRIVER_NAME "addi_apci_3501"
+#include "addi-data/addi_common.h"
+#include "addi-data/addi_eeprom.c"
+#include "addi-data/hwdrv_apci3501.c"
#include "addi-data/addi_common.c"
+static const struct addi_board apci3501_boardtypes[] = {
+ {
+ .pc_DriverName = "apci3501",
+ .i_VendorId = PCI_VENDOR_ID_ADDIDATA,
+ .i_DeviceId = 0x3001,
+ .i_IorangeBase0 = 64,
+ .i_IorangeBase1 = APCI3501_ADDRESS_RANGE,
+ .i_PCIEeprom = ADDIDATA_EEPROM,
+ .pc_EepromChip = ADDIDATA_S5933,
+ .i_AoMaxdata = 16383,
+ .pr_AoRangelist = &range_apci3501_ao,
+ .i_NbrDiChannel = 2,
+ .i_NbrDoChannel = 2,
+ .i_DoMaxdata = 0x3,
+ .i_Timer = 1,
+ .interrupt = v_APCI3501_Interrupt,
+ .reset = i_APCI3501_Reset,
+ .ao_config = i_APCI3501_ConfigAnalogOutput,
+ .ao_write = i_APCI3501_WriteAnalogOutput,
+ .di_bits = apci3501_di_insn_bits,
+ .do_bits = apci3501_do_insn_bits,
+ .timer_config = i_APCI3501_ConfigTimerCounterWatchdog,
+ .timer_write = i_APCI3501_StartStopWriteTimerCounterWatchdog,
+ .timer_read = i_APCI3501_ReadTimerCounterWatchdog,
+ },
+};
+
+static DEFINE_PCI_DEVICE_TABLE(apci3501_pci_table) = {
+ { PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x3001) },
+ { 0 }
+};
+MODULE_DEVICE_TABLE(pci, apci3501_pci_table);
+
+static struct comedi_driver apci3501_driver = {
+ .driver_name = "addi_apci_3501",
+ .module = THIS_MODULE,
+ .auto_attach = addi_auto_attach,
+ .detach = i_ADDI_Detach,
+ .num_names = ARRAY_SIZE(apci3501_boardtypes),
+ .board_name = &apci3501_boardtypes[0].pc_DriverName,
+ .offset = sizeof(struct addi_board),
+};
+
+static int apci3501_pci_probe(struct pci_dev *dev,
+ const struct pci_device_id *ent)
+{
+ return comedi_pci_auto_config(dev, &apci3501_driver);
+}
+
+static void apci3501_pci_remove(struct pci_dev *dev)
+{
+ comedi_pci_auto_unconfig(dev);
+}
+
+static struct pci_driver apci3501_pci_driver = {
+ .name = "addi_apci_3501",
+ .id_table = apci3501_pci_table,
+ .probe = apci3501_pci_probe,
+ .remove = apci3501_pci_remove,
+};
+module_comedi_pci_driver(apci3501_driver, apci3501_pci_driver);
+
MODULE_AUTHOR("Comedi http://www.comedi.org");
MODULE_DESCRIPTION("Comedi low-level driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/addi_apci_3xxx.c b/drivers/staging/comedi/drivers/addi_apci_3xxx.c
index 03161c8..1562347 100644
--- a/drivers/staging/comedi/drivers/addi_apci_3xxx.c
+++ b/drivers/staging/comedi/drivers/addi_apci_3xxx.c
@@ -1,9 +1,799 @@
-#define CONFIG_APCI_3XXX 1
+#include "../comedidev.h"
+#include "comedi_fc.h"
+#include "amcc_s5933.h"
-#define ADDIDATA_DRIVER_NAME "addi_apci_3xxx"
+#include "addi-data/addi_common.h"
+#include "addi-data/addi_eeprom.c"
+#include "addi-data/hwdrv_apci3xxx.c"
#include "addi-data/addi_common.c"
+static const struct addi_board apci3xxx_boardtypes[] = {
+ {
+ .pc_DriverName = "apci3000-16",
+ .i_VendorId = PCI_VENDOR_ID_ADDIDATA,
+ .i_DeviceId = 0x3010,
+ .i_IorangeBase0 = 256,
+ .i_IorangeBase1 = 256,
+ .i_IorangeBase2 = 256,
+ .i_IorangeBase3 = 256,
+ .i_PCIEeprom = ADDIDATA_NO_EEPROM,
+ .pc_EepromChip = ADDIDATA_9054,
+ .i_NbrAiChannel = 16,
+ .i_NbrAiChannelDiff = 8,
+ .i_AiChannelList = 16,
+ .i_AiMaxdata = 4095,
+ .pr_AiRangelist = &range_apci3XXX_ai,
+ .i_NbrTTLChannel = 24,
+ .b_AvailableConvertUnit = 6,
+ .ui_MinAcquisitiontimeNs = 10000,
+ .interrupt = v_APCI3XXX_Interrupt,
+ .reset = i_APCI3XXX_Reset,
+ .ai_config = i_APCI3XXX_InsnConfigAnalogInput,
+ .ai_read = i_APCI3XXX_InsnReadAnalogInput,
+ .ttl_config = i_APCI3XXX_InsnConfigInitTTLIO,
+ .ttl_bits = i_APCI3XXX_InsnBitsTTLIO,
+ .ttl_read = i_APCI3XXX_InsnReadTTLIO,
+ .ttl_write = i_APCI3XXX_InsnWriteTTLIO,
+ }, {
+ .pc_DriverName = "apci3000-8",
+ .i_VendorId = PCI_VENDOR_ID_ADDIDATA,
+ .i_DeviceId = 0x300F,
+ .i_IorangeBase0 = 256,
+ .i_IorangeBase1 = 256,
+ .i_IorangeBase2 = 256,
+ .i_IorangeBase3 = 256,
+ .i_PCIEeprom = ADDIDATA_NO_EEPROM,
+ .pc_EepromChip = ADDIDATA_9054,
+ .i_NbrAiChannel = 8,
+ .i_NbrAiChannelDiff = 4,
+ .i_AiChannelList = 8,
+ .i_AiMaxdata = 4095,
+ .pr_AiRangelist = &range_apci3XXX_ai,
+ .i_NbrTTLChannel = 24,
+ .b_AvailableConvertUnit = 6,
+ .ui_MinAcquisitiontimeNs = 10000,
+ .interrupt = v_APCI3XXX_Interrupt,
+ .reset = i_APCI3XXX_Reset,
+ .ai_config = i_APCI3XXX_InsnConfigAnalogInput,
+ .ai_read = i_APCI3XXX_InsnReadAnalogInput,
+ .ttl_config = i_APCI3XXX_InsnConfigInitTTLIO,
+ .ttl_bits = i_APCI3XXX_InsnBitsTTLIO,
+ .ttl_read = i_APCI3XXX_InsnReadTTLIO,
+ .ttl_write = i_APCI3XXX_InsnWriteTTLIO,
+ }, {
+ .pc_DriverName = "apci3000-4",
+ .i_VendorId = PCI_VENDOR_ID_ADDIDATA,
+ .i_DeviceId = 0x300E,
+ .i_IorangeBase0 = 256,
+ .i_IorangeBase1 = 256,
+ .i_IorangeBase2 = 256,
+ .i_IorangeBase3 = 256,
+ .i_PCIEeprom = ADDIDATA_NO_EEPROM,
+ .pc_EepromChip = ADDIDATA_9054,
+ .i_NbrAiChannel = 4,
+ .i_NbrAiChannelDiff = 2,
+ .i_AiChannelList = 4,
+ .i_AiMaxdata = 4095,
+ .pr_AiRangelist = &range_apci3XXX_ai,
+ .i_NbrTTLChannel = 24,
+ .b_AvailableConvertUnit = 6,
+ .ui_MinAcquisitiontimeNs = 10000,
+ .interrupt = v_APCI3XXX_Interrupt,
+ .reset = i_APCI3XXX_Reset,
+ .ai_config = i_APCI3XXX_InsnConfigAnalogInput,
+ .ai_read = i_APCI3XXX_InsnReadAnalogInput,
+ .ttl_config = i_APCI3XXX_InsnConfigInitTTLIO,
+ .ttl_bits = i_APCI3XXX_InsnBitsTTLIO,
+ .ttl_read = i_APCI3XXX_InsnReadTTLIO,
+ .ttl_write = i_APCI3XXX_InsnWriteTTLIO,
+ }, {
+ .pc_DriverName = "apci3006-16",
+ .i_VendorId = PCI_VENDOR_ID_ADDIDATA,
+ .i_DeviceId = 0x3013,
+ .i_IorangeBase0 = 256,
+ .i_IorangeBase1 = 256,
+ .i_IorangeBase2 = 256,
+ .i_IorangeBase3 = 256,
+ .i_PCIEeprom = ADDIDATA_NO_EEPROM,
+ .pc_EepromChip = ADDIDATA_9054,
+ .i_NbrAiChannel = 16,
+ .i_NbrAiChannelDiff = 8,
+ .i_AiChannelList = 16,
+ .i_AiMaxdata = 65535,
+ .pr_AiRangelist = &range_apci3XXX_ai,
+ .i_NbrTTLChannel = 24,
+ .b_AvailableConvertUnit = 6,
+ .ui_MinAcquisitiontimeNs = 10000,
+ .interrupt = v_APCI3XXX_Interrupt,
+ .reset = i_APCI3XXX_Reset,
+ .ai_config = i_APCI3XXX_InsnConfigAnalogInput,
+ .ai_read = i_APCI3XXX_InsnReadAnalogInput,
+ .ttl_config = i_APCI3XXX_InsnConfigInitTTLIO,
+ .ttl_bits = i_APCI3XXX_InsnBitsTTLIO,
+ .ttl_read = i_APCI3XXX_InsnReadTTLIO,
+ .ttl_write = i_APCI3XXX_InsnWriteTTLIO,
+ }, {
+ .pc_DriverName = "apci3006-8",
+ .i_VendorId = PCI_VENDOR_ID_ADDIDATA,
+ .i_DeviceId = 0x3014,
+ .i_IorangeBase0 = 256,
+ .i_IorangeBase1 = 256,
+ .i_IorangeBase2 = 256,
+ .i_IorangeBase3 = 256,
+ .i_PCIEeprom = ADDIDATA_NO_EEPROM,
+ .pc_EepromChip = ADDIDATA_9054,
+ .i_NbrAiChannel = 8,
+ .i_NbrAiChannelDiff = 4,
+ .i_AiChannelList = 8,
+ .i_AiMaxdata = 65535,
+ .pr_AiRangelist = &range_apci3XXX_ai,
+ .i_NbrTTLChannel = 24,
+ .b_AvailableConvertUnit = 6,
+ .ui_MinAcquisitiontimeNs = 10000,
+ .interrupt = v_APCI3XXX_Interrupt,
+ .reset = i_APCI3XXX_Reset,
+ .ai_config = i_APCI3XXX_InsnConfigAnalogInput,
+ .ai_read = i_APCI3XXX_InsnReadAnalogInput,
+ .ttl_config = i_APCI3XXX_InsnConfigInitTTLIO,
+ .ttl_bits = i_APCI3XXX_InsnBitsTTLIO,
+ .ttl_read = i_APCI3XXX_InsnReadTTLIO,
+ .ttl_write = i_APCI3XXX_InsnWriteTTLIO,
+ }, {
+ .pc_DriverName = "apci3006-4",
+ .i_VendorId = PCI_VENDOR_ID_ADDIDATA,
+ .i_DeviceId = 0x3015,
+ .i_IorangeBase0 = 256,
+ .i_IorangeBase1 = 256,
+ .i_IorangeBase2 = 256,
+ .i_IorangeBase3 = 256,
+ .i_PCIEeprom = ADDIDATA_NO_EEPROM,
+ .pc_EepromChip = ADDIDATA_9054,
+ .i_NbrAiChannel = 4,
+ .i_NbrAiChannelDiff = 2,
+ .i_AiChannelList = 4,
+ .i_AiMaxdata = 65535,
+ .pr_AiRangelist = &range_apci3XXX_ai,
+ .i_NbrTTLChannel = 24,
+ .b_AvailableConvertUnit = 6,
+ .ui_MinAcquisitiontimeNs = 10000,
+ .interrupt = v_APCI3XXX_Interrupt,
+ .reset = i_APCI3XXX_Reset,
+ .ai_config = i_APCI3XXX_InsnConfigAnalogInput,
+ .ai_read = i_APCI3XXX_InsnReadAnalogInput,
+ .ttl_config = i_APCI3XXX_InsnConfigInitTTLIO,
+ .ttl_bits = i_APCI3XXX_InsnBitsTTLIO,
+ .ttl_read = i_APCI3XXX_InsnReadTTLIO,
+ .ttl_write = i_APCI3XXX_InsnWriteTTLIO,
+ }, {
+ .pc_DriverName = "apci3010-16",
+ .i_VendorId = PCI_VENDOR_ID_ADDIDATA,
+ .i_DeviceId = 0x3016,
+ .i_IorangeBase0 = 256,
+ .i_IorangeBase1 = 256,
+ .i_IorangeBase2 = 256,
+ .i_IorangeBase3 = 256,
+ .i_PCIEeprom = ADDIDATA_NO_EEPROM,
+ .pc_EepromChip = ADDIDATA_9054,
+ .i_NbrAiChannel = 16,
+ .i_NbrAiChannelDiff = 8,
+ .i_AiChannelList = 16,
+ .i_AiMaxdata = 4095,
+ .pr_AiRangelist = &range_apci3XXX_ai,
+ .i_NbrDiChannel = 4,
+ .i_NbrDoChannel = 4,
+ .i_DoMaxdata = 1,
+ .i_NbrTTLChannel = 24,
+ .b_AvailableConvertUnit = 6,
+ .ui_MinAcquisitiontimeNs = 5000,
+ .interrupt = v_APCI3XXX_Interrupt,
+ .reset = i_APCI3XXX_Reset,
+ .ai_config = i_APCI3XXX_InsnConfigAnalogInput,
+ .ai_read = i_APCI3XXX_InsnReadAnalogInput,
+ .di_bits = apci3xxx_di_insn_bits,
+ .do_bits = apci3xxx_do_insn_bits,
+ .ttl_config = i_APCI3XXX_InsnConfigInitTTLIO,
+ .ttl_bits = i_APCI3XXX_InsnBitsTTLIO,
+ .ttl_read = i_APCI3XXX_InsnReadTTLIO,
+ .ttl_write = i_APCI3XXX_InsnWriteTTLIO,
+ }, {
+ .pc_DriverName = "apci3010-8",
+ .i_VendorId = PCI_VENDOR_ID_ADDIDATA,
+ .i_DeviceId = 0x3017,
+ .i_IorangeBase0 = 256,
+ .i_IorangeBase1 = 256,
+ .i_IorangeBase2 = 256,
+ .i_IorangeBase3 = 256,
+ .i_PCIEeprom = ADDIDATA_NO_EEPROM,
+ .pc_EepromChip = ADDIDATA_9054,
+ .i_NbrAiChannel = 8,
+ .i_NbrAiChannelDiff = 4,
+ .i_AiChannelList = 8,
+ .i_AiMaxdata = 4095,
+ .pr_AiRangelist = &range_apci3XXX_ai,
+ .i_NbrDiChannel = 4,
+ .i_NbrDoChannel = 4,
+ .i_DoMaxdata = 1,
+ .i_NbrTTLChannel = 24,
+ .b_AvailableConvertUnit = 6,
+ .ui_MinAcquisitiontimeNs = 5000,
+ .interrupt = v_APCI3XXX_Interrupt,
+ .reset = i_APCI3XXX_Reset,
+ .ai_config = i_APCI3XXX_InsnConfigAnalogInput,
+ .ai_read = i_APCI3XXX_InsnReadAnalogInput,
+ .di_bits = apci3xxx_di_insn_bits,
+ .do_bits = apci3xxx_do_insn_bits,
+ .ttl_config = i_APCI3XXX_InsnConfigInitTTLIO,
+ .ttl_bits = i_APCI3XXX_InsnBitsTTLIO,
+ .ttl_read = i_APCI3XXX_InsnReadTTLIO,
+ .ttl_write = i_APCI3XXX_InsnWriteTTLIO,
+ }, {
+ .pc_DriverName = "apci3010-4",
+ .i_VendorId = PCI_VENDOR_ID_ADDIDATA,
+ .i_DeviceId = 0x3018,
+ .i_IorangeBase0 = 256,
+ .i_IorangeBase1 = 256,
+ .i_IorangeBase2 = 256,
+ .i_IorangeBase3 = 256,
+ .i_PCIEeprom = ADDIDATA_NO_EEPROM,
+ .pc_EepromChip = ADDIDATA_9054,
+ .i_NbrAiChannel = 4,
+ .i_NbrAiChannelDiff = 2,
+ .i_AiChannelList = 4,
+ .i_AiMaxdata = 4095,
+ .pr_AiRangelist = &range_apci3XXX_ai,
+ .i_NbrDiChannel = 4,
+ .i_NbrDoChannel = 4,
+ .i_DoMaxdata = 1,
+ .i_NbrTTLChannel = 24,
+ .b_AvailableConvertUnit = 6,
+ .ui_MinAcquisitiontimeNs = 5000,
+ .interrupt = v_APCI3XXX_Interrupt,
+ .reset = i_APCI3XXX_Reset,
+ .ai_config = i_APCI3XXX_InsnConfigAnalogInput,
+ .ai_read = i_APCI3XXX_InsnReadAnalogInput,
+ .di_bits = apci3xxx_di_insn_bits,
+ .do_bits = apci3xxx_do_insn_bits,
+ .ttl_config = i_APCI3XXX_InsnConfigInitTTLIO,
+ .ttl_bits = i_APCI3XXX_InsnBitsTTLIO,
+ .ttl_read = i_APCI3XXX_InsnReadTTLIO,
+ .ttl_write = i_APCI3XXX_InsnWriteTTLIO,
+ }, {
+ .pc_DriverName = "apci3016-16",
+ .i_VendorId = PCI_VENDOR_ID_ADDIDATA,
+ .i_DeviceId = 0x3019,
+ .i_IorangeBase0 = 256,
+ .i_IorangeBase1 = 256,
+ .i_IorangeBase2 = 256,
+ .i_IorangeBase3 = 256,
+ .i_PCIEeprom = ADDIDATA_NO_EEPROM,
+ .pc_EepromChip = ADDIDATA_9054,
+ .i_NbrAiChannel = 16,
+ .i_NbrAiChannelDiff = 8,
+ .i_AiChannelList = 16,
+ .i_AiMaxdata = 65535,
+ .pr_AiRangelist = &range_apci3XXX_ai,
+ .i_NbrDiChannel = 4,
+ .i_NbrDoChannel = 4,
+ .i_DoMaxdata = 1,
+ .i_NbrTTLChannel = 24,
+ .b_AvailableConvertUnit = 6,
+ .ui_MinAcquisitiontimeNs = 5000,
+ .interrupt = v_APCI3XXX_Interrupt,
+ .reset = i_APCI3XXX_Reset,
+ .ai_config = i_APCI3XXX_InsnConfigAnalogInput,
+ .ai_read = i_APCI3XXX_InsnReadAnalogInput,
+ .di_bits = apci3xxx_di_insn_bits,
+ .do_bits = apci3xxx_do_insn_bits,
+ .ttl_config = i_APCI3XXX_InsnConfigInitTTLIO,
+ .ttl_bits = i_APCI3XXX_InsnBitsTTLIO,
+ .ttl_read = i_APCI3XXX_InsnReadTTLIO,
+ .ttl_write = i_APCI3XXX_InsnWriteTTLIO,
+ }, {
+ .pc_DriverName = "apci3016-8",
+ .i_VendorId = PCI_VENDOR_ID_ADDIDATA,
+ .i_DeviceId = 0x301A,
+ .i_IorangeBase0 = 256,
+ .i_IorangeBase1 = 256,
+ .i_IorangeBase2 = 256,
+ .i_IorangeBase3 = 256,
+ .i_PCIEeprom = ADDIDATA_NO_EEPROM,
+ .pc_EepromChip = ADDIDATA_9054,
+ .i_NbrAiChannel = 8,
+ .i_NbrAiChannelDiff = 4,
+ .i_AiChannelList = 8,
+ .i_AiMaxdata = 65535,
+ .pr_AiRangelist = &range_apci3XXX_ai,
+ .i_NbrDiChannel = 4,
+ .i_NbrDoChannel = 4,
+ .i_DoMaxdata = 1,
+ .i_NbrTTLChannel = 24,
+ .b_AvailableConvertUnit = 6,
+ .ui_MinAcquisitiontimeNs = 5000,
+ .interrupt = v_APCI3XXX_Interrupt,
+ .reset = i_APCI3XXX_Reset,
+ .ai_config = i_APCI3XXX_InsnConfigAnalogInput,
+ .ai_read = i_APCI3XXX_InsnReadAnalogInput,
+ .di_bits = apci3xxx_di_insn_bits,
+ .do_bits = apci3xxx_do_insn_bits,
+ .ttl_config = i_APCI3XXX_InsnConfigInitTTLIO,
+ .ttl_bits = i_APCI3XXX_InsnBitsTTLIO,
+ .ttl_read = i_APCI3XXX_InsnReadTTLIO,
+ .ttl_write = i_APCI3XXX_InsnWriteTTLIO,
+ }, {
+ .pc_DriverName = "apci3016-4",
+ .i_VendorId = PCI_VENDOR_ID_ADDIDATA,
+ .i_DeviceId = 0x301B,
+ .i_IorangeBase0 = 256,
+ .i_IorangeBase1 = 256,
+ .i_IorangeBase2 = 256,
+ .i_IorangeBase3 = 256,
+ .i_PCIEeprom = ADDIDATA_NO_EEPROM,
+ .pc_EepromChip = ADDIDATA_9054,
+ .i_NbrAiChannel = 4,
+ .i_NbrAiChannelDiff = 2,
+ .i_AiChannelList = 4,
+ .i_AiMaxdata = 65535,
+ .pr_AiRangelist = &range_apci3XXX_ai,
+ .i_NbrDiChannel = 4,
+ .i_NbrDoChannel = 4,
+ .i_DoMaxdata = 1,
+ .i_NbrTTLChannel = 24,
+ .b_AvailableConvertUnit = 6,
+ .ui_MinAcquisitiontimeNs = 5000,
+ .interrupt = v_APCI3XXX_Interrupt,
+ .reset = i_APCI3XXX_Reset,
+ .ai_config = i_APCI3XXX_InsnConfigAnalogInput,
+ .ai_read = i_APCI3XXX_InsnReadAnalogInput,
+ .di_bits = apci3xxx_di_insn_bits,
+ .do_bits = apci3xxx_do_insn_bits,
+ .ttl_config = i_APCI3XXX_InsnConfigInitTTLIO,
+ .ttl_bits = i_APCI3XXX_InsnBitsTTLIO,
+ .ttl_read = i_APCI3XXX_InsnReadTTLIO,
+ .ttl_write = i_APCI3XXX_InsnWriteTTLIO,
+ }, {
+ .pc_DriverName = "apci3100-16-4",
+ .i_VendorId = PCI_VENDOR_ID_ADDIDATA,
+ .i_DeviceId = 0x301C,
+ .i_IorangeBase0 = 256,
+ .i_IorangeBase1 = 256,
+ .i_IorangeBase2 = 256,
+ .i_IorangeBase3 = 256,
+ .i_PCIEeprom = ADDIDATA_NO_EEPROM,
+ .pc_EepromChip = ADDIDATA_9054,
+ .i_NbrAiChannel = 16,
+ .i_NbrAiChannelDiff = 8,
+ .i_AiChannelList = 16,
+ .i_NbrAoChannel = 4,
+ .i_AiMaxdata = 4095,
+ .i_AoMaxdata = 4095,
+ .pr_AiRangelist = &range_apci3XXX_ai,
+ .pr_AoRangelist = &range_apci3XXX_ao,
+ .i_NbrTTLChannel = 24,
+ .b_AvailableConvertUnit = 6,
+ .ui_MinAcquisitiontimeNs = 10000,
+ .interrupt = v_APCI3XXX_Interrupt,
+ .reset = i_APCI3XXX_Reset,
+ .ai_config = i_APCI3XXX_InsnConfigAnalogInput,
+ .ai_read = i_APCI3XXX_InsnReadAnalogInput,
+ .ao_write = i_APCI3XXX_InsnWriteAnalogOutput,
+ .ttl_config = i_APCI3XXX_InsnConfigInitTTLIO,
+ .ttl_bits = i_APCI3XXX_InsnBitsTTLIO,
+ .ttl_read = i_APCI3XXX_InsnReadTTLIO,
+ .ttl_write = i_APCI3XXX_InsnWriteTTLIO,
+ }, {
+ .pc_DriverName = "apci3100-8-4",
+ .i_VendorId = PCI_VENDOR_ID_ADDIDATA,
+ .i_DeviceId = 0x301D,
+ .i_IorangeBase0 = 256,
+ .i_IorangeBase1 = 256,
+ .i_IorangeBase2 = 256,
+ .i_IorangeBase3 = 256,
+ .i_PCIEeprom = ADDIDATA_NO_EEPROM,
+ .pc_EepromChip = ADDIDATA_9054,
+ .i_NbrAiChannel = 8,
+ .i_NbrAiChannelDiff = 4,
+ .i_AiChannelList = 8,
+ .i_NbrAoChannel = 4,
+ .i_AiMaxdata = 4095,
+ .i_AoMaxdata = 4095,
+ .pr_AiRangelist = &range_apci3XXX_ai,
+ .pr_AoRangelist = &range_apci3XXX_ao,
+ .i_NbrTTLChannel = 24,
+ .b_AvailableConvertUnit = 6,
+ .ui_MinAcquisitiontimeNs = 10000,
+ .interrupt = v_APCI3XXX_Interrupt,
+ .reset = i_APCI3XXX_Reset,
+ .ai_config = i_APCI3XXX_InsnConfigAnalogInput,
+ .ai_read = i_APCI3XXX_InsnReadAnalogInput,
+ .ao_write = i_APCI3XXX_InsnWriteAnalogOutput,
+ .ttl_config = i_APCI3XXX_InsnConfigInitTTLIO,
+ .ttl_bits = i_APCI3XXX_InsnBitsTTLIO,
+ .ttl_read = i_APCI3XXX_InsnReadTTLIO,
+ .ttl_write = i_APCI3XXX_InsnWriteTTLIO,
+ }, {
+ .pc_DriverName = "apci3106-16-4",
+ .i_VendorId = PCI_VENDOR_ID_ADDIDATA,
+ .i_DeviceId = 0x301E,
+ .i_IorangeBase0 = 256,
+ .i_IorangeBase1 = 256,
+ .i_IorangeBase2 = 256,
+ .i_IorangeBase3 = 256,
+ .i_PCIEeprom = ADDIDATA_NO_EEPROM,
+ .pc_EepromChip = ADDIDATA_9054,
+ .i_NbrAiChannel = 16,
+ .i_NbrAiChannelDiff = 8,
+ .i_AiChannelList = 16,
+ .i_NbrAoChannel = 4,
+ .i_AiMaxdata = 65535,
+ .i_AoMaxdata = 4095,
+ .pr_AiRangelist = &range_apci3XXX_ai,
+ .pr_AoRangelist = &range_apci3XXX_ao,
+ .i_NbrTTLChannel = 24,
+ .b_AvailableConvertUnit = 6,
+ .ui_MinAcquisitiontimeNs = 10000,
+ .interrupt = v_APCI3XXX_Interrupt,
+ .reset = i_APCI3XXX_Reset,
+ .ai_config = i_APCI3XXX_InsnConfigAnalogInput,
+ .ai_read = i_APCI3XXX_InsnReadAnalogInput,
+ .ao_write = i_APCI3XXX_InsnWriteAnalogOutput,
+ .ttl_config = i_APCI3XXX_InsnConfigInitTTLIO,
+ .ttl_bits = i_APCI3XXX_InsnBitsTTLIO,
+ .ttl_read = i_APCI3XXX_InsnReadTTLIO,
+ .ttl_write = i_APCI3XXX_InsnWriteTTLIO,
+ }, {
+ .pc_DriverName = "apci3106-8-4",
+ .i_VendorId = PCI_VENDOR_ID_ADDIDATA,
+ .i_DeviceId = 0x301F,
+ .i_IorangeBase0 = 256,
+ .i_IorangeBase1 = 256,
+ .i_IorangeBase2 = 256,
+ .i_IorangeBase3 = 256,
+ .i_PCIEeprom = ADDIDATA_NO_EEPROM,
+ .pc_EepromChip = ADDIDATA_9054,
+ .i_NbrAiChannel = 8,
+ .i_NbrAiChannelDiff = 4,
+ .i_AiChannelList = 8,
+ .i_NbrAoChannel = 4,
+ .i_AiMaxdata = 65535,
+ .i_AoMaxdata = 4095,
+ .pr_AiRangelist = &range_apci3XXX_ai,
+ .pr_AoRangelist = &range_apci3XXX_ao,
+ .i_NbrTTLChannel = 24,
+ .b_AvailableConvertUnit = 6,
+ .ui_MinAcquisitiontimeNs = 10000,
+ .interrupt = v_APCI3XXX_Interrupt,
+ .reset = i_APCI3XXX_Reset,
+ .ai_config = i_APCI3XXX_InsnConfigAnalogInput,
+ .ai_read = i_APCI3XXX_InsnReadAnalogInput,
+ .ao_write = i_APCI3XXX_InsnWriteAnalogOutput,
+ .ttl_config = i_APCI3XXX_InsnConfigInitTTLIO,
+ .ttl_bits = i_APCI3XXX_InsnBitsTTLIO,
+ .ttl_read = i_APCI3XXX_InsnReadTTLIO,
+ .ttl_write = i_APCI3XXX_InsnWriteTTLIO,
+ }, {
+ .pc_DriverName = "apci3110-16-4",
+ .i_VendorId = PCI_VENDOR_ID_ADDIDATA,
+ .i_DeviceId = 0x3020,
+ .i_IorangeBase0 = 256,
+ .i_IorangeBase1 = 256,
+ .i_IorangeBase2 = 256,
+ .i_IorangeBase3 = 256,
+ .i_PCIEeprom = ADDIDATA_NO_EEPROM,
+ .pc_EepromChip = ADDIDATA_9054,
+ .i_NbrAiChannel = 16,
+ .i_NbrAiChannelDiff = 8,
+ .i_AiChannelList = 16,
+ .i_NbrAoChannel = 4,
+ .i_AiMaxdata = 4095,
+ .i_AoMaxdata = 4095,
+ .pr_AiRangelist = &range_apci3XXX_ai,
+ .pr_AoRangelist = &range_apci3XXX_ao,
+ .i_NbrDiChannel = 4,
+ .i_NbrDoChannel = 4,
+ .i_DoMaxdata = 1,
+ .i_NbrTTLChannel = 24,
+ .b_AvailableConvertUnit = 6,
+ .ui_MinAcquisitiontimeNs = 5000,
+ .interrupt = v_APCI3XXX_Interrupt,
+ .reset = i_APCI3XXX_Reset,
+ .ai_config = i_APCI3XXX_InsnConfigAnalogInput,
+ .ai_read = i_APCI3XXX_InsnReadAnalogInput,
+ .ao_write = i_APCI3XXX_InsnWriteAnalogOutput,
+ .di_bits = apci3xxx_di_insn_bits,
+ .do_bits = apci3xxx_do_insn_bits,
+ .ttl_config = i_APCI3XXX_InsnConfigInitTTLIO,
+ .ttl_bits = i_APCI3XXX_InsnBitsTTLIO,
+ .ttl_read = i_APCI3XXX_InsnReadTTLIO,
+ .ttl_write = i_APCI3XXX_InsnWriteTTLIO,
+ }, {
+ .pc_DriverName = "apci3110-8-4",
+ .i_VendorId = PCI_VENDOR_ID_ADDIDATA,
+ .i_DeviceId = 0x3021,
+ .i_IorangeBase0 = 256,
+ .i_IorangeBase1 = 256,
+ .i_IorangeBase2 = 256,
+ .i_IorangeBase3 = 256,
+ .i_PCIEeprom = ADDIDATA_NO_EEPROM,
+ .pc_EepromChip = ADDIDATA_9054,
+ .i_NbrAiChannel = 8,
+ .i_NbrAiChannelDiff = 4,
+ .i_AiChannelList = 8,
+ .i_NbrAoChannel = 4,
+ .i_AiMaxdata = 4095,
+ .i_AoMaxdata = 4095,
+ .pr_AiRangelist = &range_apci3XXX_ai,
+ .pr_AoRangelist = &range_apci3XXX_ao,
+ .i_NbrDiChannel = 4,
+ .i_NbrDoChannel = 4,
+ .i_DoMaxdata = 1,
+ .i_NbrTTLChannel = 24,
+ .b_AvailableConvertUnit = 6,
+ .ui_MinAcquisitiontimeNs = 5000,
+ .interrupt = v_APCI3XXX_Interrupt,
+ .reset = i_APCI3XXX_Reset,
+ .ai_config = i_APCI3XXX_InsnConfigAnalogInput,
+ .ai_read = i_APCI3XXX_InsnReadAnalogInput,
+ .ao_write = i_APCI3XXX_InsnWriteAnalogOutput,
+ .di_bits = apci3xxx_di_insn_bits,
+ .do_bits = apci3xxx_do_insn_bits,
+ .ttl_config = i_APCI3XXX_InsnConfigInitTTLIO,
+ .ttl_bits = i_APCI3XXX_InsnBitsTTLIO,
+ .ttl_read = i_APCI3XXX_InsnReadTTLIO,
+ .ttl_write = i_APCI3XXX_InsnWriteTTLIO,
+ }, {
+ .pc_DriverName = "apci3116-16-4",
+ .i_VendorId = PCI_VENDOR_ID_ADDIDATA,
+ .i_DeviceId = 0x3022,
+ .i_IorangeBase0 = 256,
+ .i_IorangeBase1 = 256,
+ .i_IorangeBase2 = 256,
+ .i_IorangeBase3 = 256,
+ .i_PCIEeprom = ADDIDATA_NO_EEPROM,
+ .pc_EepromChip = ADDIDATA_9054,
+ .i_NbrAiChannel = 16,
+ .i_NbrAiChannelDiff = 8,
+ .i_AiChannelList = 16,
+ .i_NbrAoChannel = 4,
+ .i_AiMaxdata = 65535,
+ .i_AoMaxdata = 4095,
+ .pr_AiRangelist = &range_apci3XXX_ai,
+ .pr_AoRangelist = &range_apci3XXX_ao,
+ .i_NbrDiChannel = 4,
+ .i_NbrDoChannel = 4,
+ .i_DoMaxdata = 1,
+ .i_NbrTTLChannel = 24,
+ .b_AvailableConvertUnit = 6,
+ .ui_MinAcquisitiontimeNs = 5000,
+ .interrupt = v_APCI3XXX_Interrupt,
+ .reset = i_APCI3XXX_Reset,
+ .ai_config = i_APCI3XXX_InsnConfigAnalogInput,
+ .ai_read = i_APCI3XXX_InsnReadAnalogInput,
+ .ao_write = i_APCI3XXX_InsnWriteAnalogOutput,
+ .di_bits = apci3xxx_di_insn_bits,
+ .do_bits = apci3xxx_do_insn_bits,
+ .ttl_config = i_APCI3XXX_InsnConfigInitTTLIO,
+ .ttl_bits = i_APCI3XXX_InsnBitsTTLIO,
+ .ttl_read = i_APCI3XXX_InsnReadTTLIO,
+ .ttl_write = i_APCI3XXX_InsnWriteTTLIO,
+ }, {
+ .pc_DriverName = "apci3116-8-4",
+ .i_VendorId = PCI_VENDOR_ID_ADDIDATA,
+ .i_DeviceId = 0x3023,
+ .i_IorangeBase0 = 256,
+ .i_IorangeBase1 = 256,
+ .i_IorangeBase2 = 256,
+ .i_IorangeBase3 = 256,
+ .i_PCIEeprom = ADDIDATA_NO_EEPROM,
+ .pc_EepromChip = ADDIDATA_9054,
+ .i_NbrAiChannel = 8,
+ .i_NbrAiChannelDiff = 4,
+ .i_AiChannelList = 8,
+ .i_NbrAoChannel = 4,
+ .i_AiMaxdata = 65535,
+ .i_AoMaxdata = 4095,
+ .pr_AiRangelist = &range_apci3XXX_ai,
+ .pr_AoRangelist = &range_apci3XXX_ao,
+ .i_NbrDiChannel = 4,
+ .i_NbrDoChannel = 4,
+ .i_DoMaxdata = 1,
+ .i_NbrTTLChannel = 24,
+ .b_AvailableConvertUnit = 6,
+ .ui_MinAcquisitiontimeNs = 5000,
+ .interrupt = v_APCI3XXX_Interrupt,
+ .reset = i_APCI3XXX_Reset,
+ .ai_config = i_APCI3XXX_InsnConfigAnalogInput,
+ .ai_read = i_APCI3XXX_InsnReadAnalogInput,
+ .ao_write = i_APCI3XXX_InsnWriteAnalogOutput,
+ .di_bits = apci3xxx_di_insn_bits,
+ .do_bits = apci3xxx_do_insn_bits,
+ .ttl_config = i_APCI3XXX_InsnConfigInitTTLIO,
+ .ttl_bits = i_APCI3XXX_InsnBitsTTLIO,
+ .ttl_read = i_APCI3XXX_InsnReadTTLIO,
+ .ttl_write = i_APCI3XXX_InsnWriteTTLIO,
+ }, {
+ .pc_DriverName = "apci3003",
+ .i_VendorId = PCI_VENDOR_ID_ADDIDATA,
+ .i_DeviceId = 0x300B,
+ .i_IorangeBase0 = 256,
+ .i_IorangeBase1 = 256,
+ .i_IorangeBase2 = 256,
+ .i_IorangeBase3 = 256,
+ .i_PCIEeprom = ADDIDATA_NO_EEPROM,
+ .pc_EepromChip = ADDIDATA_9054,
+ .i_NbrAiChannelDiff = 4,
+ .i_AiChannelList = 4,
+ .i_AiMaxdata = 65535,
+ .pr_AiRangelist = &range_apci3XXX_ai,
+ .i_NbrDiChannel = 4,
+ .i_NbrDoChannel = 4,
+ .i_DoMaxdata = 1,
+ .b_AvailableConvertUnit = 7,
+ .ui_MinAcquisitiontimeNs = 2500,
+ .interrupt = v_APCI3XXX_Interrupt,
+ .reset = i_APCI3XXX_Reset,
+ .ai_config = i_APCI3XXX_InsnConfigAnalogInput,
+ .ai_read = i_APCI3XXX_InsnReadAnalogInput,
+ .di_bits = apci3xxx_di_insn_bits,
+ .do_bits = apci3xxx_do_insn_bits,
+ }, {
+ .pc_DriverName = "apci3002-16",
+ .i_VendorId = PCI_VENDOR_ID_ADDIDATA,
+ .i_DeviceId = 0x3002,
+ .i_IorangeBase0 = 256,
+ .i_IorangeBase1 = 256,
+ .i_IorangeBase2 = 256,
+ .i_IorangeBase3 = 256,
+ .i_PCIEeprom = ADDIDATA_NO_EEPROM,
+ .pc_EepromChip = ADDIDATA_9054,
+ .i_NbrAiChannelDiff = 16,
+ .i_AiChannelList = 16,
+ .i_AiMaxdata = 65535,
+ .pr_AiRangelist = &range_apci3XXX_ai,
+ .i_NbrDiChannel = 4,
+ .i_NbrDoChannel = 4,
+ .i_DoMaxdata = 1,
+ .b_AvailableConvertUnit = 6,
+ .ui_MinAcquisitiontimeNs = 5000,
+ .interrupt = v_APCI3XXX_Interrupt,
+ .reset = i_APCI3XXX_Reset,
+ .ai_config = i_APCI3XXX_InsnConfigAnalogInput,
+ .ai_read = i_APCI3XXX_InsnReadAnalogInput,
+ .di_bits = apci3xxx_di_insn_bits,
+ .do_bits = apci3xxx_do_insn_bits,
+ }, {
+ .pc_DriverName = "apci3002-8",
+ .i_VendorId = PCI_VENDOR_ID_ADDIDATA,
+ .i_DeviceId = 0x3003,
+ .i_IorangeBase0 = 256,
+ .i_IorangeBase1 = 256,
+ .i_IorangeBase2 = 256,
+ .i_IorangeBase3 = 256,
+ .i_PCIEeprom = ADDIDATA_NO_EEPROM,
+ .pc_EepromChip = ADDIDATA_9054,
+ .i_NbrAiChannelDiff = 8,
+ .i_AiChannelList = 8,
+ .i_AiMaxdata = 65535,
+ .pr_AiRangelist = &range_apci3XXX_ai,
+ .i_NbrDiChannel = 4,
+ .i_NbrDoChannel = 4,
+ .i_DoMaxdata = 1,
+ .b_AvailableConvertUnit = 6,
+ .ui_MinAcquisitiontimeNs = 5000,
+ .interrupt = v_APCI3XXX_Interrupt,
+ .reset = i_APCI3XXX_Reset,
+ .ai_config = i_APCI3XXX_InsnConfigAnalogInput,
+ .ai_read = i_APCI3XXX_InsnReadAnalogInput,
+ .di_bits = apci3xxx_di_insn_bits,
+ .do_bits = apci3xxx_do_insn_bits,
+ }, {
+ .pc_DriverName = "apci3002-4",
+ .i_VendorId = PCI_VENDOR_ID_ADDIDATA,
+ .i_DeviceId = 0x3004,
+ .i_IorangeBase0 = 256,
+ .i_IorangeBase1 = 256,
+ .i_IorangeBase2 = 256,
+ .i_IorangeBase3 = 256,
+ .i_PCIEeprom = ADDIDATA_NO_EEPROM,
+ .pc_EepromChip = ADDIDATA_9054,
+ .i_NbrAiChannelDiff = 4,
+ .i_AiChannelList = 4,
+ .i_AiMaxdata = 65535,
+ .pr_AiRangelist = &range_apci3XXX_ai,
+ .i_NbrDiChannel = 4,
+ .i_NbrDoChannel = 4,
+ .i_DoMaxdata = 1,
+ .b_AvailableConvertUnit = 6,
+ .ui_MinAcquisitiontimeNs = 5000,
+ .interrupt = v_APCI3XXX_Interrupt,
+ .reset = i_APCI3XXX_Reset,
+ .ai_config = i_APCI3XXX_InsnConfigAnalogInput,
+ .ai_read = i_APCI3XXX_InsnReadAnalogInput,
+ .di_bits = apci3xxx_di_insn_bits,
+ .do_bits = apci3xxx_do_insn_bits,
+ }, {
+ .pc_DriverName = "apci3500",
+ .i_VendorId = PCI_VENDOR_ID_ADDIDATA,
+ .i_DeviceId = 0x3024,
+ .i_IorangeBase0 = 256,
+ .i_IorangeBase1 = 256,
+ .i_IorangeBase2 = 256,
+ .i_IorangeBase3 = 256,
+ .i_PCIEeprom = ADDIDATA_NO_EEPROM,
+ .pc_EepromChip = ADDIDATA_9054,
+ .i_NbrAoChannel = 4,
+ .i_AoMaxdata = 4095,
+ .pr_AoRangelist = &range_apci3XXX_ao,
+ .i_NbrTTLChannel = 24,
+ .interrupt = v_APCI3XXX_Interrupt,
+ .reset = i_APCI3XXX_Reset,
+ .ao_write = i_APCI3XXX_InsnWriteAnalogOutput,
+ .ttl_config = i_APCI3XXX_InsnConfigInitTTLIO,
+ .ttl_bits = i_APCI3XXX_InsnBitsTTLIO,
+ .ttl_read = i_APCI3XXX_InsnReadTTLIO,
+ .ttl_write = i_APCI3XXX_InsnWriteTTLIO,
+ },
+};
+
+static struct comedi_driver apci3xxx_driver = {
+ .driver_name = "addi_apci_3xxx",
+ .module = THIS_MODULE,
+ .auto_attach = addi_auto_attach,
+ .detach = i_ADDI_Detach,
+ .num_names = ARRAY_SIZE(apci3xxx_boardtypes),
+ .board_name = &apci3xxx_boardtypes[0].pc_DriverName,
+ .offset = sizeof(struct addi_board),
+};
+
+static int apci3xxx_pci_probe(struct pci_dev *dev,
+ const struct pci_device_id *ent)
+{
+ return comedi_pci_auto_config(dev, &apci3xxx_driver);
+}
+
+static void apci3xxx_pci_remove(struct pci_dev *dev)
+{
+ comedi_pci_auto_unconfig(dev);
+}
+
+static DEFINE_PCI_DEVICE_TABLE(apci3xxx_pci_table) = {
+ { PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x3010) },
+ { PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x300f) },
+ { PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x300e) },
+ { PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x3013) },
+ { PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x3014) },
+ { PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x3015) },
+ { PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x3016) },
+ { PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x3017) },
+ { PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x3018) },
+ { PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x3019) },
+ { PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x301a) },
+ { PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x301b) },
+ { PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x301c) },
+ { PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x301d) },
+ { PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x301e) },
+ { PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x301f) },
+ { PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x3020) },
+ { PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x3021) },
+ { PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x3022) },
+ { PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x3023) },
+ { PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x300B) },
+ { PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x3002) },
+ { PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x3003) },
+ { PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x3004) },
+ { PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x3024) },
+ { 0 }
+};
+MODULE_DEVICE_TABLE(pci, apci3xxx_pci_table);
+
+static struct pci_driver apci3xxx_pci_driver = {
+ .name = "addi_apci_3xxx",
+ .id_table = apci3xxx_pci_table,
+ .probe = apci3xxx_pci_probe,
+ .remove = apci3xxx_pci_remove,
+};
+module_comedi_pci_driver(apci3xxx_driver, apci3xxx_pci_driver);
+
MODULE_AUTHOR("Comedi http://www.comedi.org");
MODULE_DESCRIPTION("Comedi low-level driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/adl_pci6208.c b/drivers/staging/comedi/drivers/adl_pci6208.c
index 3492ce1..9a56eed 100644
--- a/drivers/staging/comedi/drivers/adl_pci6208.c
+++ b/drivers/staging/comedi/drivers/adl_pci6208.c
@@ -174,27 +174,26 @@
return NULL;
}
-static int pci6208_attach_pci(struct comedi_device *dev,
- struct pci_dev *pcidev)
+static int pci6208_auto_attach(struct comedi_device *dev,
+ unsigned long context_unused)
{
+ struct pci_dev *pcidev = comedi_to_pci_dev(dev);
const struct pci6208_board *boardinfo;
struct pci6208_private *devpriv;
struct comedi_subdevice *s;
unsigned int val;
int ret;
- comedi_set_hw_dev(dev, &pcidev->dev);
-
boardinfo = pci6208_find_boardinfo(dev, pcidev);
if (!boardinfo)
return -ENODEV;
dev->board_ptr = boardinfo;
dev->board_name = boardinfo->name;
- ret = alloc_private(dev, sizeof(*devpriv));
- if (ret < 0)
- return ret;
- devpriv = dev->private;
+ devpriv = kzalloc(sizeof(*devpriv), GFP_KERNEL);
+ if (!devpriv)
+ return -ENOMEM;
+ dev->private = devpriv;
ret = comedi_pci_enable(pcidev, dev->board_name);
if (ret)
@@ -261,17 +260,17 @@
static struct comedi_driver adl_pci6208_driver = {
.driver_name = "adl_pci6208",
.module = THIS_MODULE,
- .attach_pci = pci6208_attach_pci,
+ .auto_attach = pci6208_auto_attach,
.detach = pci6208_detach,
};
-static int __devinit adl_pci6208_pci_probe(struct pci_dev *dev,
+static int adl_pci6208_pci_probe(struct pci_dev *dev,
const struct pci_device_id *ent)
{
return comedi_pci_auto_config(dev, &adl_pci6208_driver);
}
-static void __devexit adl_pci6208_pci_remove(struct pci_dev *dev)
+static void adl_pci6208_pci_remove(struct pci_dev *dev)
{
comedi_pci_auto_unconfig(dev);
}
@@ -287,7 +286,7 @@
.name = "adl_pci6208",
.id_table = adl_pci6208_pci_table,
.probe = adl_pci6208_pci_probe,
- .remove = __devexit_p(adl_pci6208_pci_remove),
+ .remove = adl_pci6208_pci_remove,
};
module_comedi_pci_driver(adl_pci6208_driver, adl_pci6208_pci_driver);
diff --git a/drivers/staging/comedi/drivers/adl_pci7x3x.c b/drivers/staging/comedi/drivers/adl_pci7x3x.c
index 599714e..772edc0 100644
--- a/drivers/staging/comedi/drivers/adl_pci7x3x.c
+++ b/drivers/staging/comedi/drivers/adl_pci7x3x.c
@@ -168,17 +168,16 @@
return NULL;
}
-static int adl_pci7x3x_attach_pci(struct comedi_device *dev,
- struct pci_dev *pcidev)
+static int adl_pci7x3x_auto_attach(struct comedi_device *dev,
+ unsigned long context_unused)
{
+ struct pci_dev *pcidev = comedi_to_pci_dev(dev);
const struct adl_pci7x3x_boardinfo *board;
struct comedi_subdevice *s;
int subdev;
int nchan;
int ret;
- comedi_set_hw_dev(dev, &pcidev->dev);
-
board = adl_pci7x3x_find_boardinfo(dev, pcidev);
if (!board)
return -ENODEV;
@@ -293,17 +292,17 @@
static struct comedi_driver adl_pci7x3x_driver = {
.driver_name = "adl_pci7x3x",
.module = THIS_MODULE,
- .attach_pci = adl_pci7x3x_attach_pci,
+ .auto_attach = adl_pci7x3x_auto_attach,
.detach = adl_pci7x3x_detach,
};
-static int __devinit adl_pci7x3x_pci_probe(struct pci_dev *dev,
+static int adl_pci7x3x_pci_probe(struct pci_dev *dev,
const struct pci_device_id *ent)
{
return comedi_pci_auto_config(dev, &adl_pci7x3x_driver);
}
-static void __devexit adl_pci7x3x_pci_remove(struct pci_dev *dev)
+static void adl_pci7x3x_pci_remove(struct pci_dev *dev)
{
comedi_pci_auto_unconfig(dev);
}
@@ -323,7 +322,7 @@
.name = "adl_pci7x3x",
.id_table = adl_pci7x3x_pci_table,
.probe = adl_pci7x3x_pci_probe,
- .remove = __devexit_p(adl_pci7x3x_pci_remove),
+ .remove = adl_pci7x3x_pci_remove,
};
module_comedi_pci_driver(adl_pci7x3x_driver, adl_pci7x3x_pci_driver);
diff --git a/drivers/staging/comedi/drivers/adl_pci8164.c b/drivers/staging/comedi/drivers/adl_pci8164.c
index 05e06e7..4dd9d70 100644
--- a/drivers/staging/comedi/drivers/adl_pci8164.c
+++ b/drivers/staging/comedi/drivers/adl_pci8164.c
@@ -89,9 +89,9 @@
}
data[0] = inw(dev->iobase + axis_reg + offset);
- printk(KERN_DEBUG "comedi: pci8164 %s read -> "
- "%04X:%04X on axis %s\n",
- action, data[0], data[1], axisname);
+ dev_dbg(dev->class_dev,
+ "pci8164 %s read -> %04X:%04X on axis %s\n",
+ action, data[0], data[1], axisname);
}
static int adl_pci8164_insn_read_msts(struct comedi_device *dev,
@@ -170,9 +170,9 @@
outw(data[0], dev->iobase + axis_reg + offset);
- printk(KERN_DEBUG "comedi: pci8164 %s write -> "
- "%04X:%04X on axis %s\n",
- action, data[0], data[1], axisname);
+ dev_dbg(dev->class_dev,
+ "pci8164 %s write -> %04X:%04X on axis %s\n",
+ action, data[0], data[1], axisname);
}
@@ -212,14 +212,13 @@
return 2;
}
-static int adl_pci8164_attach_pci(struct comedi_device *dev,
- struct pci_dev *pcidev)
+static int adl_pci8164_auto_attach(struct comedi_device *dev,
+ unsigned long context_unused)
{
+ struct pci_dev *pcidev = comedi_to_pci_dev(dev);
struct comedi_subdevice *s;
int ret;
- comedi_set_hw_dev(dev, &pcidev->dev);
-
dev->board_name = dev->driver->driver_name;
ret = comedi_pci_enable(pcidev, dev->board_name);
@@ -289,17 +288,17 @@
static struct comedi_driver adl_pci8164_driver = {
.driver_name = "adl_pci8164",
.module = THIS_MODULE,
- .attach_pci = adl_pci8164_attach_pci,
+ .auto_attach = adl_pci8164_auto_attach,
.detach = adl_pci8164_detach,
};
-static int __devinit adl_pci8164_pci_probe(struct pci_dev *dev,
+static int adl_pci8164_pci_probe(struct pci_dev *dev,
const struct pci_device_id *ent)
{
return comedi_pci_auto_config(dev, &adl_pci8164_driver);
}
-static void __devexit adl_pci8164_pci_remove(struct pci_dev *dev)
+static void adl_pci8164_pci_remove(struct pci_dev *dev)
{
comedi_pci_auto_unconfig(dev);
}
@@ -314,7 +313,7 @@
.name = "adl_pci8164",
.id_table = adl_pci8164_pci_table,
.probe = adl_pci8164_pci_probe,
- .remove = __devexit_p(adl_pci8164_pci_remove),
+ .remove = adl_pci8164_pci_remove,
};
module_comedi_pci_driver(adl_pci8164_driver, adl_pci8164_pci_driver);
diff --git a/drivers/staging/comedi/drivers/adl_pci9111.c b/drivers/staging/comedi/drivers/adl_pci9111.c
index a87192a..a339b9d 100644
--- a/drivers/staging/comedi/drivers/adl_pci9111.c
+++ b/drivers/staging/comedi/drivers/adl_pci9111.c
@@ -366,52 +366,29 @@
if (error)
return 2;
- /* Step 3 : make sure arguments are trivialy compatible */
+ /* Step 3: check if arguments are trivially valid */
- if ((cmd->start_src == TRIG_NOW) && (cmd->start_arg != 0)) {
- cmd->start_arg = 0;
- error++;
- }
+ error |= cfc_check_trigger_arg_is(&cmd->start_arg, 0);
- if ((cmd->convert_src == TRIG_TIMER) &&
- (cmd->convert_arg < PCI9111_AI_ACQUISITION_PERIOD_MIN_NS)) {
- cmd->convert_arg = PCI9111_AI_ACQUISITION_PERIOD_MIN_NS;
- error++;
- }
- if ((cmd->convert_src == TRIG_EXT) && (cmd->convert_arg != 0)) {
- cmd->convert_arg = 0;
- error++;
- }
+ if (cmd->convert_src == TRIG_TIMER)
+ error |= cfc_check_trigger_arg_min(&cmd->convert_arg,
+ PCI9111_AI_ACQUISITION_PERIOD_MIN_NS);
+ else /* TRIG_EXT */
+ error |= cfc_check_trigger_arg_is(&cmd->convert_arg, 0);
- if ((cmd->scan_begin_src == TRIG_TIMER) &&
- (cmd->scan_begin_arg < PCI9111_AI_ACQUISITION_PERIOD_MIN_NS)) {
- cmd->scan_begin_arg = PCI9111_AI_ACQUISITION_PERIOD_MIN_NS;
- error++;
- }
- if ((cmd->scan_begin_src == TRIG_FOLLOW)
- && (cmd->scan_begin_arg != 0)) {
- cmd->scan_begin_arg = 0;
- error++;
- }
- if ((cmd->scan_begin_src == TRIG_EXT) && (cmd->scan_begin_arg != 0)) {
- cmd->scan_begin_arg = 0;
- error++;
- }
+ if (cmd->scan_begin_src == TRIG_TIMER)
+ error |= cfc_check_trigger_arg_min(&cmd->scan_begin_arg,
+ PCI9111_AI_ACQUISITION_PERIOD_MIN_NS);
+ else /* TRIG_FOLLOW || TRIG_EXT */
+ error |= cfc_check_trigger_arg_is(&cmd->scan_begin_arg, 0);
- if ((cmd->scan_end_src == TRIG_COUNT) &&
- (cmd->scan_end_arg != cmd->chanlist_len)) {
- cmd->scan_end_arg = cmd->chanlist_len;
- error++;
- }
+ error |= cfc_check_trigger_arg_is(&cmd->scan_end_arg,
+ cmd->chanlist_len);
- if ((cmd->stop_src == TRIG_COUNT) && (cmd->stop_arg < 1)) {
- cmd->stop_arg = 1;
- error++;
- }
- if ((cmd->stop_src == TRIG_NONE) && (cmd->stop_arg != 0)) {
- cmd->stop_arg = 0;
- error++;
- }
+ if (cmd->stop_src == TRIG_COUNT)
+ error |= cfc_check_trigger_arg_min(&cmd->stop_arg, 1);
+ else /* TRIG_NONE */
+ error |= cfc_check_trigger_arg_is(&cmd->stop_arg, 0);
if (error)
return 3;
@@ -879,20 +856,20 @@
return 0;
}
-static int pci9111_attach_pci(struct comedi_device *dev,
- struct pci_dev *pcidev)
+static int pci9111_auto_attach(struct comedi_device *dev,
+ unsigned long context_unused)
{
+ struct pci_dev *pcidev = comedi_to_pci_dev(dev);
struct pci9111_private_data *dev_private;
struct comedi_subdevice *s;
int ret;
- comedi_set_hw_dev(dev, &pcidev->dev);
dev->board_name = dev->driver->driver_name;
- ret = alloc_private(dev, sizeof(*dev_private));
- if (ret)
- return ret;
- dev_private = dev->private;
+ dev_private = kzalloc(sizeof(*dev_private), GFP_KERNEL);
+ if (!dev_private)
+ return -ENOMEM;
+ dev->private = dev_private;
ret = comedi_pci_enable(pcidev, dev->board_name);
if (ret)
@@ -976,17 +953,17 @@
static struct comedi_driver adl_pci9111_driver = {
.driver_name = "adl_pci9111",
.module = THIS_MODULE,
- .attach_pci = pci9111_attach_pci,
+ .auto_attach = pci9111_auto_attach,
.detach = pci9111_detach,
};
-static int __devinit pci9111_pci_probe(struct pci_dev *dev,
+static int pci9111_pci_probe(struct pci_dev *dev,
const struct pci_device_id *ent)
{
return comedi_pci_auto_config(dev, &adl_pci9111_driver);
}
-static void __devexit pci9111_pci_remove(struct pci_dev *dev)
+static void pci9111_pci_remove(struct pci_dev *dev)
{
comedi_pci_auto_unconfig(dev);
}
@@ -1002,7 +979,7 @@
.name = "adl_pci9111",
.id_table = pci9111_pci_table,
.probe = pci9111_pci_probe,
- .remove = __devexit_p(pci9111_pci_remove),
+ .remove = pci9111_pci_remove,
};
module_comedi_pci_driver(adl_pci9111_driver, adl_pci9111_pci_driver);
diff --git a/drivers/staging/comedi/drivers/adl_pci9118.c b/drivers/staging/comedi/drivers/adl_pci9118.c
index 06ff65c..b6dda80 100644
--- a/drivers/staging/comedi/drivers/adl_pci9118.c
+++ b/drivers/staging/comedi/drivers/adl_pci9118.c
@@ -62,6 +62,20 @@
256|=ignore nFull - A/D FIFO Full status
*/
+
+/*
+ * FIXME
+ *
+ * All the supported boards have the same PCI vendor and device IDs, so
+ * auto-attachment of PCI devices will always find the first board type.
+ *
+ * Perhaps the boards have different subdevice IDs that we could use to
+ * distinguish them?
+ *
+ * Need some device attributes so the board type can be corrected after
+ * attachment if necessary, and possibly to set other options supported by
+ * manual attachment.
+ */
#include "../comedidev.h"
#include <linux/delay.h>
@@ -73,8 +87,6 @@
#include "8253.h"
#include "comedi_fc.h"
-#define PCI_VENDOR_ID_AMCC 0x10e8
-
/* paranoid checks are broken */
#undef PCI9118_PARANOIDCHECK /*
* if defined, then is used code which control
@@ -210,8 +222,7 @@
struct boardtype {
const char *name; /* board name */
- int vendor_id; /* PCI vendor a device ID of card */
- int device_id;
+ int device_id; /* PCI device ID of card */
int iorange_amcc; /* iorange for own S5933 region */
int iorange_9118; /* pass thru card region size */
int n_aichan; /* num of A/D chans */
@@ -235,6 +246,61 @@
};
+static const struct boardtype boardtypes[] = {
+ {
+ .name = "pci9118dg",
+ .device_id = 0x80d9,
+ .iorange_amcc = AMCC_OP_REG_SIZE,
+ .iorange_9118 = IORANGE_9118,
+ .n_aichan = 16,
+ .n_aichand = 8,
+ .mux_aichan = 256,
+ .n_aichanlist = PCI9118_CHANLEN,
+ .n_aochan = 2,
+ .ai_maxdata = 0x0fff,
+ .ao_maxdata = 0x0fff,
+ .rangelist_ai = &range_pci9118dg_hr,
+ .rangelist_ao = &range_bipolar10,
+ .ai_ns_min = 3000,
+ .ai_pacer_min = 12,
+ .half_fifo_size = 512,
+ }, {
+ .name = "pci9118hg",
+ .device_id = 0x80d9,
+ .iorange_amcc = AMCC_OP_REG_SIZE,
+ .iorange_9118 = IORANGE_9118,
+ .n_aichan = 16,
+ .n_aichand = 8,
+ .mux_aichan = 256,
+ .n_aichanlist = PCI9118_CHANLEN,
+ .n_aochan = 2,
+ .ai_maxdata = 0x0fff,
+ .ao_maxdata = 0x0fff,
+ .rangelist_ai = &range_pci9118hg,
+ .rangelist_ao = &range_bipolar10,
+ .ai_ns_min = 3000,
+ .ai_pacer_min = 12,
+ .half_fifo_size = 512,
+ }, {
+ .name = "pci9118hr",
+ .device_id = 0x80d9,
+ .iorange_amcc = AMCC_OP_REG_SIZE,
+ .iorange_9118 = IORANGE_9118,
+ .n_aichan = 16,
+ .n_aichand = 8,
+ .mux_aichan = 256,
+ .n_aichanlist = PCI9118_CHANLEN,
+ .n_aochan = 2,
+ .ai_maxdata = 0xffff,
+ .ao_maxdata = 0x0fff,
+ .rangelist_ai = &range_pci9118dg_hr,
+ .rangelist_ao = &range_bipolar10,
+ .ai_ns_min = 10000,
+ .ai_pacer_min = 40,
+ .half_fifo_size = 512,
+ },
+};
+
struct pci9118_private {
unsigned long iobase_a; /* base+size for AMCC chip */
unsigned int master; /* master capable */
@@ -358,10 +424,8 @@
return 0;
}
if ((frontadd + n_chan + backadd) > s->len_chanlist) {
- printk
- ("comedi%d: range/channel list is too long for "
- "actual configuration (%d>%d)!",
- dev->minor, n_chan, s->len_chanlist - frontadd - backadd);
+ comedi_error(dev,
+ "range/channel list is too long for actual configuration!\n");
return 0;
}
@@ -892,11 +956,10 @@
if (devpriv->ai16bits == 0) {
if ((sampl & 0x000f) != devpriv->chanlist[s->async->cur_chan]) {
/* data dropout! */
- printk
- ("comedi: A/D SAMPL - data dropout: "
- "received channel %d, expected %d!\n",
- sampl & 0x000f,
- devpriv->chanlist[s->async->cur_chan]);
+ dev_info(dev->class_dev,
+ "A/D SAMPL - data dropout: received channel %d, expected %d!\n",
+ sampl & 0x000f,
+ devpriv->chanlist[s->async->cur_chan]);
s->async->events |= COMEDI_CB_ERROR | COMEDI_CB_EOA;
pci9118_ai_cancel(dev, s);
comedi_event(dev, s);
@@ -1153,19 +1216,13 @@
if (err)
return 2;
- /* step 3: make sure arguments are trivially compatible */
+ /* Step 3: check if arguments are trivially valid */
if (cmd->start_src & (TRIG_NOW | TRIG_EXT))
- if (cmd->start_arg != 0) {
- cmd->start_arg = 0;
- err++;
- }
+ err |= cfc_check_trigger_arg_is(&cmd->start_arg, 0);
if (cmd->scan_begin_src & (TRIG_FOLLOW | TRIG_EXT))
- if (cmd->scan_begin_arg != 0) {
- cmd->scan_begin_arg = 0;
- err++;
- }
+ err |= cfc_check_trigger_arg_is(&cmd->scan_begin_arg, 0);
if ((cmd->scan_begin_src == TRIG_TIMER) &&
(cmd->convert_src == TRIG_TIMER) && (cmd->scan_end_arg == 1)) {
@@ -1175,64 +1232,40 @@
}
if (cmd->scan_begin_src == TRIG_TIMER)
- if (cmd->scan_begin_arg < this_board->ai_ns_min) {
- cmd->scan_begin_arg = this_board->ai_ns_min;
- err++;
- }
+ err |= cfc_check_trigger_arg_min(&cmd->scan_begin_arg,
+ this_board->ai_ns_min);
if (cmd->scan_begin_src == TRIG_EXT)
if (cmd->scan_begin_arg) {
cmd->scan_begin_arg = 0;
- err++;
- if (cmd->scan_end_arg > 65535) {
- cmd->scan_end_arg = 65535;
- err++;
- }
+ err |= -EINVAL;
+ err |= cfc_check_trigger_arg_max(&cmd->scan_end_arg,
+ 65535);
}
if (cmd->convert_src & (TRIG_TIMER | TRIG_NOW))
- if (cmd->convert_arg < this_board->ai_ns_min) {
- cmd->convert_arg = this_board->ai_ns_min;
- err++;
- }
+ err |= cfc_check_trigger_arg_min(&cmd->convert_arg,
+ this_board->ai_ns_min);
if (cmd->convert_src == TRIG_EXT)
- if (cmd->convert_arg) {
- cmd->convert_arg = 0;
- err++;
- }
+ err |= cfc_check_trigger_arg_is(&cmd->convert_arg, 0);
- if (cmd->stop_src == TRIG_COUNT) {
- if (!cmd->stop_arg) {
- cmd->stop_arg = 1;
- err++;
- }
- } else { /* TRIG_NONE */
- if (cmd->stop_arg != 0) {
- cmd->stop_arg = 0;
- err++;
- }
- }
+ if (cmd->stop_src == TRIG_COUNT)
+ err |= cfc_check_trigger_arg_min(&cmd->stop_arg, 1);
+ else /* TRIG_NONE */
+ err |= cfc_check_trigger_arg_is(&cmd->stop_arg, 0);
- if (!cmd->chanlist_len) {
- cmd->chanlist_len = 1;
- err++;
- }
+ err |= cfc_check_trigger_arg_min(&cmd->chanlist_len, 1);
+ err |= cfc_check_trigger_arg_max(&cmd->chanlist_len,
+ this_board->n_aichanlist);
- if (cmd->chanlist_len > this_board->n_aichanlist) {
- cmd->chanlist_len = this_board->n_aichanlist;
- err++;
- }
-
- if (cmd->scan_end_arg < cmd->chanlist_len) {
- cmd->scan_end_arg = cmd->chanlist_len;
- err++;
- }
+ err |= cfc_check_trigger_arg_min(&cmd->scan_end_arg,
+ cmd->chanlist_len);
if ((cmd->scan_end_arg % cmd->chanlist_len)) {
cmd->scan_end_arg =
cmd->chanlist_len * (cmd->scan_end_arg / cmd->chanlist_len);
- err++;
+ err |= -EINVAL;
}
if (err)
@@ -1318,21 +1351,18 @@
if (dmalen0 < (devpriv->ai_n_realscanlen << 1)) {
/* uff, too short DMA buffer, disable EOS support! */
devpriv->ai_flags &= (~TRIG_WAKE_EOS);
- printk
- ("comedi%d: WAR: DMA0 buf too short, can't "
- "support TRIG_WAKE_EOS (%d<%d)\n",
- dev->minor, dmalen0,
- devpriv->ai_n_realscanlen << 1);
+ dev_info(dev->class_dev,
+ "WAR: DMA0 buf too short, can't support TRIG_WAKE_EOS (%d<%d)\n",
+ dmalen0, devpriv->ai_n_realscanlen << 1);
} else {
/* short first DMA buffer to one scan */
dmalen0 = devpriv->ai_n_realscanlen << 1;
if (devpriv->useeoshandle)
dmalen0 += 2;
if (dmalen0 < 4) {
- printk
- ("comedi%d: ERR: DMA0 buf len bug? "
- "(%d<4)\n",
- dev->minor, dmalen0);
+ dev_info(dev->class_dev,
+ "ERR: DMA0 buf len bug? (%d<4)\n",
+ dmalen0);
dmalen0 = 4;
}
}
@@ -1341,21 +1371,18 @@
if (dmalen1 < (devpriv->ai_n_realscanlen << 1)) {
/* uff, too short DMA buffer, disable EOS support! */
devpriv->ai_flags &= (~TRIG_WAKE_EOS);
- printk
- ("comedi%d: WAR: DMA1 buf too short, "
- "can't support TRIG_WAKE_EOS (%d<%d)\n",
- dev->minor, dmalen1,
- devpriv->ai_n_realscanlen << 1);
+ dev_info(dev->class_dev,
+ "WAR: DMA1 buf too short, can't support TRIG_WAKE_EOS (%d<%d)\n",
+ dmalen1, devpriv->ai_n_realscanlen << 1);
} else {
/* short second DMA buffer to one scan */
dmalen1 = devpriv->ai_n_realscanlen << 1;
if (devpriv->useeoshandle)
dmalen1 -= 2;
if (dmalen1 < 4) {
- printk
- ("comedi%d: ERR: DMA1 buf len bug? "
- "(%d<4)\n",
- dev->minor, dmalen1);
+ dev_info(dev->class_dev,
+ "ERR: DMA1 buf len bug? (%d<4)\n",
+ dmalen1);
dmalen1 = 4;
}
}
@@ -1865,6 +1892,20 @@
return 0;
}
+/*
+ * FIXME - this is pretty ineffective because all the supported board types
+ * have the same device ID!
+ */
+static const struct boardtype *pci9118_find_boardinfo(struct pci_dev *pcidev)
+{
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(boardtypes); i++)
+ if (pcidev->device == boardtypes[i].device_id)
+ return &boardtypes[i];
+ return NULL;
+}
+
static struct pci_dev *pci9118_find_pci(struct comedi_device *dev,
struct comedi_devconfig *it)
{
@@ -1884,85 +1925,63 @@
PCI_SLOT(pcidev->devfn) != slot)
continue;
}
- /*
- * Look for device that isn't in use.
- * Enable PCI device and request regions.
- */
- if (comedi_pci_enable(pcidev, "adl_pci9118"))
- continue;
- printk(KERN_ERR ", b:s:f=%d:%d:%d, io=0x%4lx, 0x%4lx",
- pcidev->bus->number,
- PCI_SLOT(pcidev->devfn),
- PCI_FUNC(pcidev->devfn),
- (unsigned long)pci_resource_start(pcidev, 2),
- (unsigned long)pci_resource_start(pcidev, 0));
return pcidev;
}
- printk(KERN_ERR
- "comedi%d: no supported board found! (req. bus/slot : %d/%d)\n",
- dev->minor, bus, slot);
+ dev_err(dev->class_dev,
+ "no supported board found! (req. bus/slot : %d/%d)\n",
+ bus, slot);
return NULL;
}
-static int pci9118_attach(struct comedi_device *dev,
- struct comedi_devconfig *it)
+static void pci9118_report_attach(struct comedi_device *dev, unsigned int irq)
+{
+ struct pci_dev *pcidev = comedi_to_pci_dev(dev);
+ struct pci9118_private *devpriv = dev->private;
+ char irqbuf[30];
+ char muxbuf[30];
+
+ if (irq)
+ snprintf(irqbuf, sizeof(irqbuf), "irq %u%s", irq,
+ (dev->irq ? "" : " UNAVAILABLE"));
+ else
+ snprintf(irqbuf, sizeof(irqbuf), "irq DISABLED");
+ if (devpriv->usemux)
+ snprintf(muxbuf, sizeof(muxbuf), "ext mux %u chans",
+ devpriv->usemux);
+ else
+ snprintf(muxbuf, sizeof(muxbuf), "no ext mux");
+ dev_info(dev->class_dev, "%s (pci %s, %s, %sbus master, %s) attached\n",
+ dev->board_name, pci_name(pcidev), irqbuf,
+ (devpriv->master ? "" : "no "), muxbuf);
+}
+
+static int pci9118_common_attach(struct comedi_device *dev, int disable_irq,
+ int master, int ext_mux, int softsshdelay,
+ int hw_err_mask)
{
const struct boardtype *this_board = comedi_board(dev);
- struct pci9118_private *devpriv;
- struct pci_dev *pcidev;
+ struct pci9118_private *devpriv = dev->private;
+ struct pci_dev *pcidev = comedi_to_pci_dev(dev);
struct comedi_subdevice *s;
int ret, pages, i;
- unsigned short master;
unsigned int irq;
u16 u16w;
- printk("comedi%d: adl_pci9118: board=%s", dev->minor, this_board->name);
-
- if (it->options[3] & 1)
- master = 0; /* user don't want use bus master */
- else
- master = 1;
-
- ret = alloc_private(dev, sizeof(*devpriv));
- if (ret < 0) {
- printk(" - Allocation failed!\n");
- return -ENOMEM;
+ dev->board_name = this_board->name;
+ ret = comedi_pci_enable(pcidev, dev->board_name);
+ if (ret) {
+ dev_err(dev->class_dev,
+ "cannot enable PCI device %s\n", pci_name(pcidev));
+ return ret;
}
- devpriv = dev->private;
-
- pcidev = pci9118_find_pci(dev, it);
- if (!pcidev)
- return -EIO;
- comedi_set_hw_dev(dev, &pcidev->dev);
-
if (master)
pci_set_master(pcidev);
- irq = pcidev->irq;
devpriv->iobase_a = pci_resource_start(pcidev, 0);
dev->iobase = pci_resource_start(pcidev, 2);
- dev->board_name = this_board->name;
-
pci9118_reset(dev);
- if (it->options[3] & 2)
- irq = 0; /* user don't want use IRQ */
- if (irq > 0) {
- if (request_irq(irq, interrupt_pci9118, IRQF_SHARED,
- "ADLink PCI-9118", dev)) {
- printk(", unable to allocate IRQ %d, DISABLING IT",
- irq);
- irq = 0; /* Can't use IRQ */
- } else {
- printk(", irq=%u", irq);
- }
- } else {
- printk(", IRQ disabled");
- }
-
- dev->irq = irq;
-
if (master) { /* alloc DMA buffers */
devpriv->dma_doublebuf = 0;
for (i = 0; i < 2; i++) {
@@ -1984,47 +2003,37 @@
}
}
if (!devpriv->dmabuf_virt[0]) {
- printk(", Can't allocate DMA buffer, DMA disabled!");
+ dev_warn(dev->class_dev,
+ "Can't allocate DMA buffer, DMA disabled!\n");
master = 0;
}
-
if (devpriv->dmabuf_virt[1])
devpriv->dma_doublebuf = 1;
-
}
-
devpriv->master = master;
- if (devpriv->master)
- printk(", bus master");
- else
- printk(", no bus master");
- devpriv->usemux = 0;
- if (it->options[2] > 0) {
- devpriv->usemux = it->options[2];
- if (devpriv->usemux > 256)
- devpriv->usemux = 256; /* max 256 channels! */
- if (it->options[4] > 0)
- if (devpriv->usemux > 128) {
- devpriv->usemux = 128;
- /* max 128 channels with softare S&H! */
- }
- printk(", ext. mux %d channels", devpriv->usemux);
+ if (ext_mux > 0) {
+ if (ext_mux > 256)
+ ext_mux = 256; /* max 256 channels! */
+ if (softsshdelay > 0)
+ if (ext_mux > 128)
+ ext_mux = 128;
+ devpriv->usemux = ext_mux;
+ } else {
+ devpriv->usemux = 0;
}
- devpriv->softsshdelay = it->options[4];
- if (devpriv->softsshdelay < 0) {
- /* select sample&hold signal polarity */
- devpriv->softsshdelay = -devpriv->softsshdelay;
+ if (softsshdelay < 0) {
+ /* select sample&hold signal polarity */
+ devpriv->softsshdelay = -softsshdelay;
devpriv->softsshsample = 0x80;
devpriv->softsshhold = 0x00;
} else {
+ devpriv->softsshdelay = softsshdelay;
devpriv->softsshsample = 0x00;
devpriv->softsshhold = 0x80;
}
- printk(".\n");
-
pci_read_config_word(pcidev, PCI_COMMAND, &u16w);
pci_write_config_word(pcidev, PCI_COMMAND, u16w | 64);
/* Enable parity check for parity error */
@@ -2047,12 +2056,7 @@
s->range_table = this_board->rangelist_ai;
s->cancel = pci9118_ai_cancel;
s->insn_read = pci9118_insn_read_ai;
- if (dev->irq) {
- s->subdev_flags |= SDF_CMD_READ;
- s->do_cmdtest = pci9118_ai_cmdtest;
- s->do_cmd = pci9118_ai_cmd;
- s->munge = pci9118_ai_munge;
- }
+ s->munge = pci9118_ai_munge;
s = &dev->subdevices[1];
s->type = COMEDI_SUBD_AO;
@@ -2088,8 +2092,8 @@
devpriv->i8254_osc_base = 250; /* 250ns=4MHz */
devpriv->ai_maskharderr = 0x10a;
/* default measure crash condition */
- if (it->options[5]) /* disable some requested */
- devpriv->ai_maskharderr &= ~it->options[5];
+ if (hw_err_mask) /* disable some requested */
+ devpriv->ai_maskharderr &= ~hw_err_mask;
switch (this_board->ai_maxdata) {
case 0xffff:
@@ -2099,9 +2103,86 @@
devpriv->ai16bits = 0;
break;
}
+
+ if (disable_irq)
+ irq = 0;
+ else
+ irq = pcidev->irq;
+ if (irq > 0) {
+ if (request_irq(irq, interrupt_pci9118, IRQF_SHARED,
+ dev->board_name, dev)) {
+ dev_warn(dev->class_dev,
+ "unable to allocate IRQ %u, DISABLING IT\n",
+ irq);
+ } else {
+ dev->irq = irq;
+ /* Enable AI commands */
+ s = &dev->subdevices[0];
+ s->subdev_flags |= SDF_CMD_READ;
+ s->do_cmdtest = pci9118_ai_cmdtest;
+ s->do_cmd = pci9118_ai_cmd;
+ }
+ }
+
+ pci9118_report_attach(dev, irq);
return 0;
}
+static int pci9118_attach(struct comedi_device *dev,
+ struct comedi_devconfig *it)
+{
+ struct pci9118_private *devpriv;
+ struct pci_dev *pcidev;
+ int ext_mux, disable_irq, master, softsshdelay, hw_err_mask;
+
+ ext_mux = it->options[2];
+ master = ((it->options[3] & 1) == 0);
+ disable_irq = ((it->options[3] & 2) != 0);
+ softsshdelay = it->options[4];
+ hw_err_mask = it->options[5];
+
+ devpriv = kzalloc(sizeof(*devpriv), GFP_KERNEL);
+ if (!devpriv)
+ return -ENOMEM;
+ dev->private = devpriv;
+
+ pcidev = pci9118_find_pci(dev, it);
+ if (!pcidev)
+ return -EIO;
+ comedi_set_hw_dev(dev, &pcidev->dev);
+
+ return pci9118_common_attach(dev, disable_irq, master, ext_mux,
+ softsshdelay, hw_err_mask);
+}
+
+static int pci9118_auto_attach(struct comedi_device *dev,
+ unsigned long context_unused)
+{
+ struct pci_dev *pcidev = comedi_to_pci_dev(dev);
+ struct pci9118_private *devpriv;
+
+ devpriv = kzalloc(sizeof(*devpriv), GFP_KERNEL);
+ if (!devpriv)
+ return -ENOMEM;
+ dev->private = devpriv;
+
+ dev->board_ptr = pci9118_find_boardinfo(pcidev);
+ if (dev->board_ptr == NULL) {
+ dev_err(dev->class_dev,
+ "adl_pci9118: cannot determine board type for pci %s\n",
+ pci_name(pcidev));
+ return -EINVAL;
+ }
+ /*
+ * Need to 'get' the PCI device to match the 'put' in pci9118_detach().
+ * (The 'put' also matches the implicit 'get' by pci9118_find_pci().)
+ */
+ pci_dev_get(pcidev);
+ /* Don't disable irq, use bus master, no external mux,
+ * no sample-hold delay, no error mask. */
+ return pci9118_common_attach(dev, 0, 1, 0, 0, 0);
+}
+
static void pci9118_detach(struct comedi_device *dev)
{
struct pci_dev *pcidev = comedi_to_pci_dev(dev);
@@ -2127,81 +2208,24 @@
}
}
-static const struct boardtype boardtypes[] = {
- {
- .name = "pci9118dg",
- .vendor_id = PCI_VENDOR_ID_AMCC,
- .device_id = 0x80d9,
- .iorange_amcc = AMCC_OP_REG_SIZE,
- .iorange_9118 = IORANGE_9118,
- .n_aichan = 16,
- .n_aichand = 8,
- .mux_aichan = 256,
- .n_aichanlist = PCI9118_CHANLEN,
- .n_aochan = 2,
- .ai_maxdata = 0x0fff,
- .ao_maxdata = 0x0fff,
- .rangelist_ai = &range_pci9118dg_hr,
- .rangelist_ao = &range_bipolar10,
- .ai_ns_min = 3000,
- .ai_pacer_min = 12,
- .half_fifo_size = 512,
- }, {
- .name = "pci9118hg",
- .vendor_id = PCI_VENDOR_ID_AMCC,
- .device_id = 0x80d9,
- .iorange_amcc = AMCC_OP_REG_SIZE,
- .iorange_9118 = IORANGE_9118,
- .n_aichan = 16,
- .n_aichand = 8,
- .mux_aichan = 256,
- .n_aichanlist = PCI9118_CHANLEN,
- .n_aochan = 2,
- .ai_maxdata = 0x0fff,
- .ao_maxdata = 0x0fff,
- .rangelist_ai = &range_pci9118hg,
- .rangelist_ao = &range_bipolar10,
- .ai_ns_min = 3000,
- .ai_pacer_min = 12,
- .half_fifo_size = 512,
- }, {
- .name = "pci9118hr",
- .vendor_id = PCI_VENDOR_ID_AMCC,
- .device_id = 0x80d9,
- .iorange_amcc = AMCC_OP_REG_SIZE,
- .iorange_9118 = IORANGE_9118,
- .n_aichan = 16,
- .n_aichand = 8,
- .mux_aichan = 256,
- .n_aichanlist = PCI9118_CHANLEN,
- .n_aochan = 2,
- .ai_maxdata = 0xffff,
- .ao_maxdata = 0x0fff,
- .rangelist_ai = &range_pci9118dg_hr,
- .rangelist_ao = &range_bipolar10,
- .ai_ns_min = 10000,
- .ai_pacer_min = 40,
- .half_fifo_size = 512,
- },
-};
-
static struct comedi_driver adl_pci9118_driver = {
.driver_name = "adl_pci9118",
.module = THIS_MODULE,
.attach = pci9118_attach,
+ .auto_attach = pci9118_auto_attach,
.detach = pci9118_detach,
.num_names = ARRAY_SIZE(boardtypes),
.board_name = &boardtypes[0].name,
.offset = sizeof(struct boardtype),
};
-static int __devinit adl_pci9118_pci_probe(struct pci_dev *dev,
+static int adl_pci9118_pci_probe(struct pci_dev *dev,
const struct pci_device_id *ent)
{
return comedi_pci_auto_config(dev, &adl_pci9118_driver);
}
-static void __devexit adl_pci9118_pci_remove(struct pci_dev *dev)
+static void adl_pci9118_pci_remove(struct pci_dev *dev)
{
comedi_pci_auto_unconfig(dev);
}
@@ -2216,7 +2240,7 @@
.name = "adl_pci9118",
.id_table = adl_pci9118_pci_table,
.probe = adl_pci9118_pci_probe,
- .remove = __devexit_p(adl_pci9118_pci_remove),
+ .remove = adl_pci9118_pci_remove,
};
module_comedi_pci_driver(adl_pci9118_driver, adl_pci9118_pci_driver);
diff --git a/drivers/staging/comedi/drivers/adq12b.c b/drivers/staging/comedi/drivers/adq12b.c
index 3a2aa56..f7950df 100644
--- a/drivers/staging/comedi/drivers/adq12b.c
+++ b/drivers/staging/comedi/drivers/adq12b.c
@@ -116,15 +116,6 @@
}
};
-struct adq12b_board {
- const char *name;
- int ai_se_chans;
- int ai_diff_chans;
- int ai_bits;
- int di_chans;
- int do_chans;
-};
-
struct adq12b_private {
int unipolar; /* option 2 of comedi_config (1 is iobase) */
int differential; /* option 3 of comedi_config */
@@ -220,13 +211,14 @@
static int adq12b_attach(struct comedi_device *dev, struct comedi_devconfig *it)
{
- const struct adq12b_board *board = comedi_board(dev);
struct adq12b_private *devpriv;
struct comedi_subdevice *s;
unsigned long iobase;
int unipolar, differential;
int ret;
+ dev->board_name = dev->driver->driver_name;
+
iobase = it->options[0];
unipolar = it->options[1];
differential = it->options[2];
@@ -251,12 +243,10 @@
}
dev->iobase = iobase;
- dev->board_name = board->name;
-
- ret = alloc_private(dev, sizeof(*devpriv));
- if (ret)
- return ret;
- devpriv = dev->private;
+ devpriv = kzalloc(sizeof(*devpriv), GFP_KERNEL);
+ if (!devpriv)
+ return -ENOMEM;
+ dev->private = devpriv;
devpriv->unipolar = unipolar;
devpriv->differential = differential;
@@ -277,10 +267,10 @@
s->type = COMEDI_SUBD_AI;
if (differential) {
s->subdev_flags = SDF_READABLE | SDF_GROUND | SDF_DIFF;
- s->n_chan = board->ai_diff_chans;
+ s->n_chan = 8;
} else {
s->subdev_flags = SDF_READABLE | SDF_GROUND;
- s->n_chan = board->ai_se_chans;
+ s->n_chan = 16;
}
if (unipolar)
@@ -288,7 +278,7 @@
else
s->range_table = &range_adq12b_ai_bipolar;
- s->maxdata = (1 << board->ai_bits) - 1;
+ s->maxdata = 0xfff;
s->len_chanlist = 4; /* This is the maximum chanlist length that
the board can handle */
@@ -298,7 +288,7 @@
/* digital input subdevice */
s->type = COMEDI_SUBD_DI;
s->subdev_flags = SDF_READABLE;
- s->n_chan = board->di_chans;
+ s->n_chan = 5;
s->maxdata = 1;
s->range_table = &range_digital;
s->insn_bits = adq12b_di_insn_bits;
@@ -307,7 +297,7 @@
/* digital output subdevice */
s->type = COMEDI_SUBD_DO;
s->subdev_flags = SDF_WRITABLE;
- s->n_chan = board->do_chans;
+ s->n_chan = 8;
s->maxdata = 1;
s->range_table = &range_digital;
s->insn_bits = adq12b_do_insn_bits;
@@ -323,25 +313,11 @@
release_region(dev->iobase, ADQ12B_SIZE);
}
-static const struct adq12b_board adq12b_boards[] = {
- {
- .name = "adq12b",
- .ai_se_chans = 16,
- .ai_diff_chans = 8,
- .ai_bits = 12,
- .di_chans = 5,
- .do_chans = 8,
- },
-};
-
static struct comedi_driver adq12b_driver = {
.driver_name = "adq12b",
.module = THIS_MODULE,
.attach = adq12b_attach,
.detach = adq12b_detach,
- .board_name = &adq12b_boards[0].name,
- .offset = sizeof(struct adq12b_board),
- .num_names = ARRAY_SIZE(adq12b_boards),
};
module_comedi_driver(adq12b_driver);
diff --git a/drivers/staging/comedi/drivers/adv_pci1710.c b/drivers/staging/comedi/drivers/adv_pci1710.c
index def37bc..a6fd8c2 100644
--- a/drivers/staging/comedi/drivers/adv_pci1710.c
+++ b/drivers/staging/comedi/drivers/adv_pci1710.c
@@ -53,8 +53,6 @@
* correct channel number on every 12 bit
* sample */
-#define PCI_VENDOR_ID_ADVANTECH 0x13fe
-
/* hardware types of the cards */
#define TYPE_PCI171X 0
#define TYPE_PCI1713 2
@@ -1068,45 +1066,23 @@
if (err)
return 2;
- /* step 3: make sure arguments are trivially compatible */
+ /* Step 3: check if arguments are trivially valid */
- if (cmd->start_arg != 0) {
- cmd->start_arg = 0;
- err++;
- }
+ err |= cfc_check_trigger_arg_is(&cmd->start_arg, 0);
+ err |= cfc_check_trigger_arg_is(&cmd->scan_begin_arg, 0);
- if (cmd->scan_begin_arg != 0) {
- cmd->scan_begin_arg = 0;
- err++;
- }
+ if (cmd->convert_src == TRIG_TIMER)
+ err |= cfc_check_trigger_arg_min(&cmd->convert_arg,
+ this_board->ai_ns_min);
+ else /* TRIG_FOLLOW */
+ err |= cfc_check_trigger_arg_is(&cmd->convert_arg, 0);
- if (cmd->convert_src == TRIG_TIMER) {
- if (cmd->convert_arg < this_board->ai_ns_min) {
- cmd->convert_arg = this_board->ai_ns_min;
- err++;
- }
- } else { /* TRIG_FOLLOW */
- if (cmd->convert_arg != 0) {
- cmd->convert_arg = 0;
- err++;
- }
- }
+ err |= cfc_check_trigger_arg_is(&cmd->scan_end_arg, cmd->chanlist_len);
- if (cmd->scan_end_arg != cmd->chanlist_len) {
- cmd->scan_end_arg = cmd->chanlist_len;
- err++;
- }
- if (cmd->stop_src == TRIG_COUNT) {
- if (!cmd->stop_arg) {
- cmd->stop_arg = 1;
- err++;
- }
- } else { /* TRIG_NONE */
- if (cmd->stop_arg != 0) {
- cmd->stop_arg = 0;
- err++;
- }
- }
+ if (cmd->stop_src == TRIG_COUNT)
+ err |= cfc_check_trigger_arg_min(&cmd->stop_arg, 1);
+ else /* TRIG_NONE */
+ err |= cfc_check_trigger_arg_is(&cmd->stop_arg, 0);
if (err)
return 3;
@@ -1257,26 +1233,25 @@
return NULL;
}
-static int pci1710_attach_pci(struct comedi_device *dev,
- struct pci_dev *pcidev)
+static int pci1710_auto_attach(struct comedi_device *dev,
+ unsigned long context_unused)
{
+ struct pci_dev *pcidev = comedi_to_pci_dev(dev);
const struct boardtype *this_board;
struct pci1710_private *devpriv;
struct comedi_subdevice *s;
int ret, subdev, n_subdevices;
- comedi_set_hw_dev(dev, &pcidev->dev);
-
this_board = pci1710_find_boardinfo(dev, pcidev);
if (!this_board)
return -ENODEV;
dev->board_ptr = this_board;
dev->board_name = this_board->name;
- ret = alloc_private(dev, sizeof(*devpriv));
- if (ret < 0)
- return ret;
- devpriv = dev->private;
+ devpriv = kzalloc(sizeof(*devpriv), GFP_KERNEL);
+ if (!devpriv)
+ return -ENOMEM;
+ dev->private = devpriv;
ret = comedi_pci_enable(pcidev, dev->board_name);
if (ret)
@@ -1417,17 +1392,17 @@
static struct comedi_driver adv_pci1710_driver = {
.driver_name = "adv_pci1710",
.module = THIS_MODULE,
- .attach_pci = pci1710_attach_pci,
+ .auto_attach = pci1710_auto_attach,
.detach = pci1710_detach,
};
-static int __devinit adv_pci1710_pci_probe(struct pci_dev *dev,
+static int adv_pci1710_pci_probe(struct pci_dev *dev,
const struct pci_device_id *ent)
{
return comedi_pci_auto_config(dev, &adv_pci1710_driver);
}
-static void __devexit adv_pci1710_pci_remove(struct pci_dev *dev)
+static void adv_pci1710_pci_remove(struct pci_dev *dev)
{
comedi_pci_auto_unconfig(dev);
}
@@ -1446,7 +1421,7 @@
.name = "adv_pci1710",
.id_table = adv_pci1710_pci_table,
.probe = adv_pci1710_pci_probe,
- .remove = __devexit_p(adv_pci1710_pci_remove),
+ .remove = adv_pci1710_pci_remove,
};
module_comedi_pci_driver(adv_pci1710_driver, adv_pci1710_pci_driver);
diff --git a/drivers/staging/comedi/drivers/adv_pci1723.c b/drivers/staging/comedi/drivers/adv_pci1723.c
index df4efc0..5af7314 100644
--- a/drivers/staging/comedi/drivers/adv_pci1723.c
+++ b/drivers/staging/comedi/drivers/adv_pci1723.c
@@ -50,8 +50,6 @@
#include "../comedidev.h"
-#define PCI_VENDOR_ID_ADVANTECH 0x13fe /* Advantech PCI vendor ID */
-
/* all the registers for the pci1723 board */
#define PCI1723_DA(N) ((N)<<1) /* W: D/A register N (0 to 7) */
@@ -234,20 +232,20 @@
return insn->n;
}
-static int pci1723_attach_pci(struct comedi_device *dev,
- struct pci_dev *pcidev)
+static int pci1723_auto_attach(struct comedi_device *dev,
+ unsigned long context_unused)
{
+ struct pci_dev *pcidev = comedi_to_pci_dev(dev);
struct pci1723_private *devpriv;
struct comedi_subdevice *s;
int ret;
- comedi_set_hw_dev(dev, &pcidev->dev);
dev->board_name = dev->driver->driver_name;
- ret = alloc_private(dev, sizeof(*devpriv));
- if (ret < 0)
- return ret;
- devpriv = dev->private;
+ devpriv = kzalloc(sizeof(*devpriv), GFP_KERNEL);
+ if (!devpriv)
+ return -ENOMEM;
+ dev->private = devpriv;
ret = comedi_pci_enable(pcidev, dev->board_name);
if (ret)
@@ -319,17 +317,17 @@
static struct comedi_driver adv_pci1723_driver = {
.driver_name = "adv_pci1723",
.module = THIS_MODULE,
- .attach_pci = pci1723_attach_pci,
+ .auto_attach = pci1723_auto_attach,
.detach = pci1723_detach,
};
-static int __devinit adv_pci1723_pci_probe(struct pci_dev *dev,
+static int adv_pci1723_pci_probe(struct pci_dev *dev,
const struct pci_device_id *ent)
{
return comedi_pci_auto_config(dev, &adv_pci1723_driver);
}
-static void __devexit adv_pci1723_pci_remove(struct pci_dev *dev)
+static void adv_pci1723_pci_remove(struct pci_dev *dev)
{
comedi_pci_auto_unconfig(dev);
}
@@ -344,7 +342,7 @@
.name = "adv_pci1723",
.id_table = adv_pci1723_pci_table,
.probe = adv_pci1723_pci_probe,
- .remove = __devexit_p(adv_pci1723_pci_remove),
+ .remove = adv_pci1723_pci_remove,
};
module_comedi_pci_driver(adv_pci1723_driver, adv_pci1723_pci_driver);
diff --git a/drivers/staging/comedi/drivers/adv_pci_dio.c b/drivers/staging/comedi/drivers/adv_pci_dio.c
index a3c2241..05a663e 100644
--- a/drivers/staging/comedi/drivers/adv_pci_dio.c
+++ b/drivers/staging/comedi/drivers/adv_pci_dio.c
@@ -36,8 +36,6 @@
#include "8255.h"
#include "8253.h"
-#define PCI_VENDOR_ID_ADVANTECH 0x13fe
-
/* hardware types of the cards */
enum hw_cards_id {
TYPE_PCI1730, TYPE_PCI1733, TYPE_PCI1734, TYPE_PCI1735, TYPE_PCI1736,
@@ -1092,26 +1090,25 @@
return NULL;
}
-static int pci_dio_attach_pci(struct comedi_device *dev,
- struct pci_dev *pcidev)
+static int pci_dio_auto_attach(struct comedi_device *dev,
+ unsigned long context_unused)
{
+ struct pci_dev *pcidev = comedi_to_pci_dev(dev);
const struct dio_boardtype *this_board;
struct pci_dio_private *devpriv;
struct comedi_subdevice *s;
int ret, subdev, i, j;
- comedi_set_hw_dev(dev, &pcidev->dev);
-
this_board = pci_dio_find_boardinfo(dev, pcidev);
if (!this_board)
return -ENODEV;
dev->board_ptr = this_board;
dev->board_name = this_board->name;
- ret = alloc_private(dev, sizeof(*devpriv));
- if (ret < 0)
- return ret;
- devpriv = dev->private;
+ devpriv = kzalloc(sizeof(*devpriv), GFP_KERNEL);
+ if (!devpriv)
+ return -ENOMEM;
+ dev->private = devpriv;
ret = comedi_pci_enable(pcidev, dev->board_name);
if (ret)
@@ -1199,17 +1196,17 @@
static struct comedi_driver adv_pci_dio_driver = {
.driver_name = "adv_pci_dio",
.module = THIS_MODULE,
- .attach_pci = pci_dio_attach_pci,
+ .auto_attach = pci_dio_auto_attach,
.detach = pci_dio_detach,
};
-static int __devinit adv_pci_dio_pci_probe(struct pci_dev *dev,
+static int adv_pci_dio_pci_probe(struct pci_dev *dev,
const struct pci_device_id *ent)
{
return comedi_pci_auto_config(dev, &adv_pci_dio_driver);
}
-static void __devexit adv_pci_dio_pci_remove(struct pci_dev *dev)
+static void adv_pci_dio_pci_remove(struct pci_dev *dev)
{
comedi_pci_auto_unconfig(dev);
}
@@ -1237,7 +1234,7 @@
.name = "adv_pci_dio",
.id_table = adv_pci_dio_pci_table,
.probe = adv_pci_dio_pci_probe,
- .remove = __devexit_p(adv_pci_dio_pci_remove),
+ .remove = adv_pci_dio_pci_remove,
};
module_comedi_pci_driver(adv_pci_dio_driver, adv_pci_dio_pci_driver);
diff --git a/drivers/staging/comedi/drivers/aio_aio12_8.c b/drivers/staging/comedi/drivers/aio_aio12_8.c
index 8acf60d..601f03d 100644
--- a/drivers/staging/comedi/drivers/aio_aio12_8.c
+++ b/drivers/staging/comedi/drivers/aio_aio12_8.c
@@ -212,10 +212,10 @@
}
dev->iobase = iobase;
- ret = alloc_private(dev, sizeof(*devpriv));
- if (ret)
- return ret;
- devpriv = dev->private;
+ devpriv = kzalloc(sizeof(*devpriv), GFP_KERNEL);
+ if (!devpriv)
+ return -ENOMEM;
+ dev->private = devpriv;
ret = comedi_alloc_subdevices(dev, 4);
if (ret)
diff --git a/drivers/staging/comedi/drivers/aio_iiro_16.c b/drivers/staging/comedi/drivers/aio_iiro_16.c
index b2cb8b0..64c1ae5 100644
--- a/drivers/staging/comedi/drivers/aio_iiro_16.c
+++ b/drivers/staging/comedi/drivers/aio_iiro_16.c
@@ -44,19 +44,6 @@
#define AIO_IIRO_16_RELAY_8_15 0x04
#define AIO_IIRO_16_INPUT_8_15 0x05
-struct aio_iiro_16_board {
- const char *name;
- int do_;
- int di;
-};
-
-static const struct aio_iiro_16_board aio_iiro_16_boards[] = {
- {
- .name = "aio_iiro_16",
- .di = 16,
- .do_ = 16},
-};
-
static int aio_iiro_16_dio_insn_bits_write(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn,
@@ -90,14 +77,13 @@
static int aio_iiro_16_attach(struct comedi_device *dev,
struct comedi_devconfig *it)
{
- const struct aio_iiro_16_board *board = comedi_board(dev);
int iobase;
struct comedi_subdevice *s;
int ret;
printk(KERN_INFO "comedi%d: aio_iiro_16: ", dev->minor);
- dev->board_name = board->name;
+ dev->board_name = dev->driver->driver_name;
iobase = it->options[0];
@@ -144,9 +130,6 @@
.module = THIS_MODULE,
.attach = aio_iiro_16_attach,
.detach = aio_iiro_16_detach,
- .board_name = &aio_iiro_16_boards[0].name,
- .offset = sizeof(struct aio_iiro_16_board),
- .num_names = ARRAY_SIZE(aio_iiro_16_boards),
};
module_comedi_driver(aio_iiro_16_driver);
diff --git a/drivers/staging/comedi/drivers/amplc_dio200.c b/drivers/staging/comedi/drivers/amplc_dio200.c
index 29eb52d..5f309ba 100644
--- a/drivers/staging/comedi/drivers/amplc_dio200.c
+++ b/drivers/staging/comedi/drivers/amplc_dio200.c
@@ -25,185 +25,238 @@
*/
/*
-Driver: amplc_dio200
-Description: Amplicon 200 Series Digital I/O
-Author: Ian Abbott <abbotti@mev.co.uk>
-Devices: [Amplicon] PC212E (pc212e), PC214E (pc214e), PC215E (pc215e),
- PCI215 (pci215 or amplc_dio200), PC218E (pc218e), PC272E (pc272e),
- PCI272 (pci272 or amplc_dio200)
-Updated: Wed, 22 Oct 2008 13:36:02 +0100
-Status: works
-
-Configuration options - PC212E, PC214E, PC215E, PC218E, PC272E:
- [0] - I/O port base address
- [1] - IRQ (optional, but commands won't work without it)
-
-Configuration options - PCI215, PCI272:
- [0] - PCI bus of device (optional)
- [1] - PCI slot of device (optional)
- If bus/slot is not specified, the first available PCI device will
- be used.
-
-Passing a zero for an option is the same as leaving it unspecified.
-
-SUBDEVICES
-
- PC218E PC212E PC215E/PCI215
- ------------- ------------- -------------
- Subdevices 7 6 5
- 0 CTR-X1 PPI-X PPI-X
- 1 CTR-X2 CTR-Y1 PPI-Y
- 2 CTR-Y1 CTR-Y2 CTR-Z1
- 3 CTR-Y2 CTR-Z1 CTR-Z2
- 4 CTR-Z1 CTR-Z2 INTERRUPT
- 5 CTR-Z2 INTERRUPT
- 6 INTERRUPT
-
- PC214E PC272E/PCI272
- ------------- -------------
- Subdevices 4 4
- 0 PPI-X PPI-X
- 1 PPI-Y PPI-Y
- 2 CTR-Z1* PPI-Z
- 3 INTERRUPT* INTERRUPT
-
-Each PPI is a 8255 chip providing 24 DIO channels. The DIO channels
-are configurable as inputs or outputs in four groups:
-
- Port A - channels 0 to 7
- Port B - channels 8 to 15
- Port CL - channels 16 to 19
- Port CH - channels 20 to 23
-
-Only mode 0 of the 8255 chips is supported.
-
-Each CTR is a 8254 chip providing 3 16-bit counter channels. Each
-channel is configured individually with INSN_CONFIG instructions. The
-specific type of configuration instruction is specified in data[0].
-Some configuration instructions expect an additional parameter in
-data[1]; others return a value in data[1]. The following configuration
-instructions are supported:
-
- INSN_CONFIG_SET_COUNTER_MODE. Sets the counter channel's mode and
- BCD/binary setting specified in data[1].
-
- INSN_CONFIG_8254_READ_STATUS. Reads the status register value for the
- counter channel into data[1].
-
- INSN_CONFIG_SET_CLOCK_SRC. Sets the counter channel's clock source as
- specified in data[1] (this is a hardware-specific value). Not
- supported on PC214E. For the other boards, valid clock sources are
- 0 to 7 as follows:
-
- 0. CLK n, the counter channel's dedicated CLK input from the SK1
- connector. (N.B. for other values, the counter channel's CLKn
- pin on the SK1 connector is an output!)
- 1. Internal 10 MHz clock.
- 2. Internal 1 MHz clock.
- 3. Internal 100 kHz clock.
- 4. Internal 10 kHz clock.
- 5. Internal 1 kHz clock.
- 6. OUT n-1, the output of counter channel n-1 (see note 1 below).
- 7. Ext Clock, the counter chip's dedicated Ext Clock input from
- the SK1 connector. This pin is shared by all three counter
- channels on the chip.
-
- INSN_CONFIG_GET_CLOCK_SRC. Returns the counter channel's current
- clock source in data[1]. For internal clock sources, data[2] is set
- to the period in ns.
-
- INSN_CONFIG_SET_GATE_SRC. Sets the counter channel's gate source as
- specified in data[2] (this is a hardware-specific value). Not
- supported on PC214E. For the other boards, valid gate sources are 0
- to 7 as follows:
-
- 0. VCC (internal +5V d.c.), i.e. gate permanently enabled.
- 1. GND (internal 0V d.c.), i.e. gate permanently disabled.
- 2. GAT n, the counter channel's dedicated GAT input from the SK1
- connector. (N.B. for other values, the counter channel's GATn
- pin on the SK1 connector is an output!)
- 3. /OUT n-2, the inverted output of counter channel n-2 (see note
- 2 below).
- 4. Reserved.
- 5. Reserved.
- 6. Reserved.
- 7. Reserved.
-
- INSN_CONFIG_GET_GATE_SRC. Returns the counter channel's current gate
- source in data[2].
-
-Clock and gate interconnection notes:
-
- 1. Clock source OUT n-1 is the output of the preceding channel on the
- same counter subdevice if n > 0, or the output of channel 2 on the
- preceding counter subdevice (see note 3) if n = 0.
-
- 2. Gate source /OUT n-2 is the inverted output of channel 0 on the
- same counter subdevice if n = 2, or the inverted output of channel n+1
- on the preceding counter subdevice (see note 3) if n < 2.
-
- 3. The counter subdevices are connected in a ring, so the highest
- counter subdevice precedes the lowest.
-
-The 'INTERRUPT' subdevice pretends to be a digital input subdevice. The
-digital inputs come from the interrupt status register. The number of
-channels matches the number of interrupt sources. The PC214E does not
-have an interrupt status register; see notes on 'INTERRUPT SOURCES'
-below.
-
-INTERRUPT SOURCES
-
- PC218E PC212E PC215E/PCI215
- ------------- ------------- -------------
- Sources 6 6 6
- 0 CTR-X1-OUT PPI-X-C0 PPI-X-C0
- 1 CTR-X2-OUT PPI-X-C3 PPI-X-C3
- 2 CTR-Y1-OUT CTR-Y1-OUT PPI-Y-C0
- 3 CTR-Y2-OUT CTR-Y2-OUT PPI-Y-C3
- 4 CTR-Z1-OUT CTR-Z1-OUT CTR-Z1-OUT
- 5 CTR-Z2-OUT CTR-Z2-OUT CTR-Z2-OUT
-
- PC214E PC272E/PCI272
- ------------- -------------
- Sources 1 6
- 0 JUMPER-J5 PPI-X-C0
- 1 PPI-X-C3
- 2 PPI-Y-C0
- 3 PPI-Y-C3
- 4 PPI-Z-C0
- 5 PPI-Z-C3
-
-When an interrupt source is enabled in the interrupt source enable
-register, a rising edge on the source signal latches the corresponding
-bit to 1 in the interrupt status register.
-
-When the interrupt status register value as a whole (actually, just the
-6 least significant bits) goes from zero to non-zero, the board will
-generate an interrupt. For level-triggered hardware interrupts (PCI
-card), the interrupt will remain asserted until the interrupt status
-register is cleared to zero. For edge-triggered hardware interrupts
-(ISA card), no further interrupts will occur until the interrupt status
-register is cleared to zero. To clear a bit to zero in the interrupt
-status register, the corresponding interrupt source must be disabled
-in the interrupt source enable register (there is no separate interrupt
-clear register).
-
-The PC214E does not have an interrupt source enable register or an
-interrupt status register; its 'INTERRUPT' subdevice has a single
-channel and its interrupt source is selected by the position of jumper
-J5.
-
-COMMANDS
-
-The driver supports a read streaming acquisition command on the
-'INTERRUPT' subdevice. The channel list selects the interrupt sources
-to be enabled. All channels will be sampled together (convert_src ==
-TRIG_NOW). The scan begins a short time after the hardware interrupt
-occurs, subject to interrupt latencies (scan_begin_src == TRIG_EXT,
-scan_begin_arg == 0). The value read from the interrupt status register
-is packed into a short value, one bit per requested channel, in the
-order they appear in the channel list.
-*/
+ * Driver: amplc_dio200
+ * Description: Amplicon 200 Series Digital I/O
+ * Author: Ian Abbott <abbotti@mev.co.uk>
+ * Devices: [Amplicon] PC212E (pc212e), PC214E (pc214e), PC215E (pc215e),
+ * PCI215 (pci215), PCIe215 (pcie215), PC218E (pc218e), PCIe236 (pcie236),
+ * PC272E (pc272e), PCI272 (pci272), PCIe296 (pcie296)
+ * Updated: Wed, 24 Oct 2012 16:22:34 +0100
+ * Status: works
+ *
+ * Configuration options - PC212E, PC214E, PC215E, PC218E, PC272E:
+ * [0] - I/O port base address
+ * [1] - IRQ (optional, but commands won't work without it)
+ *
+ * Manual configuration of PCI(e) cards is not supported; they are configured
+ * automatically.
+ *
+ * Passing a zero for an option is the same as leaving it unspecified.
+ *
+ * SUBDEVICES
+ *
+ * PC212E PC214E PC215E/PCI215
+ * ------------- ------------- -------------
+ * Subdevices 6 4 5
+ * 0 PPI-X PPI-X PPI-X
+ * 1 CTR-Y1 PPI-Y PPI-Y
+ * 2 CTR-Y2 CTR-Z1* CTR-Z1
+ * 3 CTR-Z1 INTERRUPT* CTR-Z2
+ * 4 CTR-Z2 INTERRUPT
+ * 5 INTERRUPT
+ *
+ * PCIe215 PC218E PCIe236
+ * ------------- ------------- -------------
+ * Subdevices 8 7 8
+ * 0 PPI-X CTR-X1 PPI-X
+ * 1 UNUSED CTR-X2 UNUSED
+ * 2 PPI-Y CTR-Y1 UNUSED
+ * 3 UNUSED CTR-Y2 UNUSED
+ * 4 CTR-Z1 CTR-Z1 CTR-Z1
+ * 5 CTR-Z2 CTR-Z2 CTR-Z2
+ * 6 TIMER INTERRUPT TIMER
+ * 7 INTERRUPT INTERRUPT
+ *
+ * PC272E/PCI272 PCIe296
+ * ------------- -------------
+ * Subdevices 4 8
+ * 0 PPI-X PPI-X1
+ * 1 PPI-Y PPI-X2
+ * 2 PPI-Z PPI-Y1
+ * 3 INTERRUPT PPI-Y2
+ * 4 CTR-Z1
+ * 5 CTR-Z2
+ * 6 TIMER
+ * 7 INTERRUPT
+ *
+ * Each PPI is a 8255 chip providing 24 DIO channels. The DIO channels
+ * are configurable as inputs or outputs in four groups:
+ *
+ * Port A - channels 0 to 7
+ * Port B - channels 8 to 15
+ * Port CL - channels 16 to 19
+ * Port CH - channels 20 to 23
+ *
+ * Only mode 0 of the 8255 chips is supported.
+ *
+ * Each CTR is a 8254 chip providing 3 16-bit counter channels. Each
+ * channel is configured individually with INSN_CONFIG instructions. The
+ * specific type of configuration instruction is specified in data[0].
+ * Some configuration instructions expect an additional parameter in
+ * data[1]; others return a value in data[1]. The following configuration
+ * instructions are supported:
+ *
+ * INSN_CONFIG_SET_COUNTER_MODE. Sets the counter channel's mode and
+ * BCD/binary setting specified in data[1].
+ *
+ * INSN_CONFIG_8254_READ_STATUS. Reads the status register value for the
+ * counter channel into data[1].
+ *
+ * INSN_CONFIG_SET_CLOCK_SRC. Sets the counter channel's clock source as
+ * specified in data[1] (this is a hardware-specific value). Not
+ * supported on PC214E. For the other boards, valid clock sources are
+ * 0 to 7 as follows:
+ *
+ * 0. CLK n, the counter channel's dedicated CLK input from the SK1
+ * connector. (N.B. for other values, the counter channel's CLKn
+ * pin on the SK1 connector is an output!)
+ * 1. Internal 10 MHz clock.
+ * 2. Internal 1 MHz clock.
+ * 3. Internal 100 kHz clock.
+ * 4. Internal 10 kHz clock.
+ * 5. Internal 1 kHz clock.
+ * 6. OUT n-1, the output of counter channel n-1 (see note 1 below).
+ * 7. Ext Clock, the counter chip's dedicated Ext Clock input from
+ * the SK1 connector. This pin is shared by all three counter
+ * channels on the chip.
+ *
+ * For the PCIe boards, clock sources in the range 0 to 31 are allowed
+ * and the following additional clock sources are defined:
+ *
+ * 8. HIGH logic level.
+ * 9. LOW logic level.
+ * 10. "Pattern present" signal.
+ * 11. Internal 20 MHz clock.
+ *
+ * INSN_CONFIG_GET_CLOCK_SRC. Returns the counter channel's current
+ * clock source in data[1]. For internal clock sources, data[2] is set
+ * to the period in ns.
+ *
+ * INSN_CONFIG_SET_GATE_SRC. Sets the counter channel's gate source as
+ * specified in data[2] (this is a hardware-specific value). Not
+ * supported on PC214E. For the other boards, valid gate sources are 0
+ * to 7 as follows:
+ *
+ * 0. VCC (internal +5V d.c.), i.e. gate permanently enabled.
+ * 1. GND (internal 0V d.c.), i.e. gate permanently disabled.
+ * 2. GAT n, the counter channel's dedicated GAT input from the SK1
+ * connector. (N.B. for other values, the counter channel's GATn
+ * pin on the SK1 connector is an output!)
+ * 3. /OUT n-2, the inverted output of counter channel n-2 (see note
+ * 2 below).
+ * 4. Reserved.
+ * 5. Reserved.
+ * 6. Reserved.
+ * 7. Reserved.
+ *
+ * For the PCIe boards, gate sources in the range 0 to 31 are allowed;
+ * the following additional clock sources and clock sources 6 and 7 are
+ * (re)defined:
+ *
+ * 6. /GAT n, negated version of the counter channel's dedicated
+ * GAT input (negated version of gate source 2).
+ * 7. OUT n-2, the non-inverted output of counter channel n-2
+ * (negated version of gate source 3).
+ * 8. "Pattern present" signal, HIGH while pattern present.
+ * 9. "Pattern occurred" latched signal, latches HIGH when pattern
+ * occurs.
+ * 10. "Pattern gone away" latched signal, latches LOW when pattern
+ * goes away after it occurred.
+ * 11. Negated "pattern present" signal, LOW while pattern present
+ * (negated version of gate source 8).
+ * 12. Negated "pattern occurred" latched signal, latches LOW when
+ * pattern occurs (negated version of gate source 9).
+ * 13. Negated "pattern gone away" latched signal, latches LOW when
+ * pattern goes away after it occurred (negated version of gate
+ * source 10).
+ *
+ * INSN_CONFIG_GET_GATE_SRC. Returns the counter channel's current gate
+ * source in data[2].
+ *
+ * Clock and gate interconnection notes:
+ *
+ * 1. Clock source OUT n-1 is the output of the preceding channel on the
+ * same counter subdevice if n > 0, or the output of channel 2 on the
+ * preceding counter subdevice (see note 3) if n = 0.
+ *
+ * 2. Gate source /OUT n-2 is the inverted output of channel 0 on the
+ * same counter subdevice if n = 2, or the inverted output of channel n+1
+ * on the preceding counter subdevice (see note 3) if n < 2.
+ *
+ * 3. The counter subdevices are connected in a ring, so the highest
+ * counter subdevice precedes the lowest.
+ *
+ * The 'TIMER' subdevice is a free-running 32-bit timer subdevice.
+ *
+ * The 'INTERRUPT' subdevice pretends to be a digital input subdevice. The
+ * digital inputs come from the interrupt status register. The number of
+ * channels matches the number of interrupt sources. The PC214E does not
+ * have an interrupt status register; see notes on 'INTERRUPT SOURCES'
+ * below.
+ *
+ * INTERRUPT SOURCES
+ *
+ * PC212E PC214E PC215E/PCI215
+ * ------------- ------------- -------------
+ * Sources 6 1 6
+ * 0 PPI-X-C0 JUMPER-J5 PPI-X-C0
+ * 1 PPI-X-C3 PPI-X-C3
+ * 2 CTR-Y1-OUT1 PPI-Y-C0
+ * 3 CTR-Y2-OUT1 PPI-Y-C3
+ * 4 CTR-Z1-OUT1 CTR-Z1-OUT1
+ * 5 CTR-Z2-OUT1 CTR-Z2-OUT1
+ *
+ * PCIe215 PC218E PCIe236
+ * ------------- ------------- -------------
+ * Sources 6 6 6
+ * 0 PPI-X-C0 CTR-X1-OUT1 PPI-X-C0
+ * 1 PPI-X-C3 CTR-X2-OUT1 PPI-X-C3
+ * 2 PPI-Y-C0 CTR-Y1-OUT1 unused
+ * 3 PPI-Y-C3 CTR-Y2-OUT1 unused
+ * 4 CTR-Z1-OUT1 CTR-Z1-OUT1 CTR-Z1-OUT1
+ * 5 CTR-Z2-OUT1 CTR-Z2-OUT1 CTR-Z2-OUT1
+ *
+ * PC272E/PCI272 PCIe296
+ * ------------- -------------
+ * Sources 6 6
+ * 0 PPI-X-C0 PPI-X1-C0
+ * 1 PPI-X-C3 PPI-X1-C3
+ * 2 PPI-Y-C0 PPI-Y1-C0
+ * 3 PPI-Y-C3 PPI-Y1-C3
+ * 4 PPI-Z-C0 CTR-Z1-OUT1
+ * 5 PPI-Z-C3 CTR-Z2-OUT1
+ *
+ * When an interrupt source is enabled in the interrupt source enable
+ * register, a rising edge on the source signal latches the corresponding
+ * bit to 1 in the interrupt status register.
+ *
+ * When the interrupt status register value as a whole (actually, just the
+ * 6 least significant bits) goes from zero to non-zero, the board will
+ * generate an interrupt. For level-triggered hardware interrupts (PCI
+ * card), the interrupt will remain asserted until the interrupt status
+ * register is cleared to zero. For edge-triggered hardware interrupts
+ * (ISA card), no further interrupts will occur until the interrupt status
+ * register is cleared to zero. To clear a bit to zero in the interrupt
+ * status register, the corresponding interrupt source must be disabled
+ * in the interrupt source enable register (there is no separate interrupt
+ * clear register).
+ *
+ * The PC214E does not have an interrupt source enable register or an
+ * interrupt status register; its 'INTERRUPT' subdevice has a single
+ * channel and its interrupt source is selected by the position of jumper
+ * J5.
+ *
+ * COMMANDS
+ *
+ * The driver supports a read streaming acquisition command on the
+ * 'INTERRUPT' subdevice. The channel list selects the interrupt sources
+ * to be enabled. All channels will be sampled together (convert_src ==
+ * TRIG_NOW). The scan begins a short time after the hardware interrupt
+ * occurs, subject to interrupt latencies (scan_begin_src == TRIG_EXT,
+ * scan_begin_arg == 0). The value read from the interrupt status register
+ * is packed into a short value, one bit per requested channel, in the
+ * order they appear in the channel list.
+ */
#include <linux/interrupt.h>
#include <linux/slab.h>
@@ -211,7 +264,6 @@
#include "../comedidev.h"
#include "comedi_fc.h"
-#include "8255.h"
#include "8253.h"
#define DIO200_DRIVER_NAME "amplc_dio200"
@@ -220,13 +272,24 @@
#define DO_PCI IS_ENABLED(CONFIG_COMEDI_AMPLC_DIO200_PCI)
/* PCI IDs */
-#define PCI_VENDOR_ID_AMPLICON 0x14dc
#define PCI_DEVICE_ID_AMPLICON_PCI272 0x000a
#define PCI_DEVICE_ID_AMPLICON_PCI215 0x000b
-#define PCI_DEVICE_ID_INVALID 0xffff
+#define PCI_DEVICE_ID_AMPLICON_PCIE236 0x0011
+#define PCI_DEVICE_ID_AMPLICON_PCIE215 0x0012
+#define PCI_DEVICE_ID_AMPLICON_PCIE296 0x0014
+
+/* 8255 control register bits */
+#define CR_C_LO_IO 0x01
+#define CR_B_IO 0x02
+#define CR_B_MODE 0x04
+#define CR_C_HI_IO 0x08
+#define CR_A_IO 0x10
+#define CR_A_MODE(a) ((a)<<5)
+#define CR_CW 0x80
/* 200 series registers */
#define DIO200_IO_SIZE 0x20
+#define DIO200_PCIE_IO_SIZE 0x4000
#define DIO200_XCLK_SCE 0x18 /* Group X clock selection register */
#define DIO200_YCLK_SCE 0x19 /* Group Y clock selection register */
#define DIO200_ZCLK_SCE 0x1a /* Group Z clock selection register */
@@ -234,30 +297,78 @@
#define DIO200_YGAT_SCE 0x1c /* Group Y gate selection register */
#define DIO200_ZGAT_SCE 0x1d /* Group Z gate selection register */
#define DIO200_INT_SCE 0x1e /* Interrupt enable/status register */
+/* Extra registers for new PCIe boards */
+#define DIO200_ENHANCE 0x20 /* 1 to enable enhanced features */
+#define DIO200_VERSION 0x24 /* Hardware version register */
+#define DIO200_TS_CONFIG 0x600 /* Timestamp timer config register */
+#define DIO200_TS_COUNT 0x602 /* Timestamp timer count register */
/*
- * Macros for constructing value for DIO_200_?CLK_SCE and
+ * Functions for constructing value for DIO_200_?CLK_SCE and
* DIO_200_?GAT_SCE registers:
*
* 'which' is: 0 for CTR-X1, CTR-Y1, CTR-Z1; 1 for CTR-X2, CTR-Y2 or CTR-Z2.
* 'chan' is the channel: 0, 1 or 2.
- * 'source' is the signal source: 0 to 7.
+ * 'source' is the signal source: 0 to 7, or 0 to 31 for "enhanced" boards.
*/
-#define CLK_SCE(which, chan, source) (((which) << 5) | ((chan) << 3) | (source))
-#define GAT_SCE(which, chan, source) (((which) << 5) | ((chan) << 3) | (source))
+static unsigned char clk_gat_sce(unsigned int which, unsigned int chan,
+ unsigned int source)
+{
+ return (which << 5) | (chan << 3) |
+ ((source & 030) << 3) | (source & 007);
+}
+
+static unsigned char clk_sce(unsigned int which, unsigned int chan,
+ unsigned int source)
+{
+ return clk_gat_sce(which, chan, source);
+}
+
+static unsigned char gat_sce(unsigned int which, unsigned int chan,
+ unsigned int source)
+{
+ return clk_gat_sce(which, chan, source);
+}
/*
* Periods of the internal clock sources in nanoseconds.
*/
-static const unsigned clock_period[8] = {
- 0, /* dedicated clock input/output pin */
- 100, /* 10 MHz */
- 1000, /* 1 MHz */
- 10000, /* 100 kHz */
- 100000, /* 10 kHz */
- 1000000, /* 1 kHz */
- 0, /* OUT N-1 */
- 0 /* group clock input pin */
+static const unsigned int clock_period[32] = {
+ [1] = 100, /* 10 MHz */
+ [2] = 1000, /* 1 MHz */
+ [3] = 10000, /* 100 kHz */
+ [4] = 100000, /* 10 kHz */
+ [5] = 1000000, /* 1 kHz */
+ [11] = 50, /* 20 MHz (enhanced boards) */
+ /* clock sources 12 and later reserved for enhanced boards */
+};
+
+/*
+ * Timestamp timer configuration register (for new PCIe boards).
+ */
+#define TS_CONFIG_RESET 0x100 /* Reset counter to zero. */
+#define TS_CONFIG_CLK_SRC_MASK 0x0FF /* Clock source. */
+#define TS_CONFIG_MAX_CLK_SRC 2 /* Maximum clock source value. */
+
+/*
+ * Periods of the timestamp timer clock sources in nanoseconds.
+ */
+static const unsigned int ts_clock_period[TS_CONFIG_MAX_CLK_SRC + 1] = {
+ 1, /* 1 nanosecond (but with 20 ns granularity). */
+ 1000, /* 1 microsecond. */
+ 1000000, /* 1 millisecond. */
+};
+
+/*
+ * Register region.
+ */
+enum dio200_regtype { no_regtype = 0, io_regtype, mmio_regtype };
+struct dio200_region {
+ union {
+ unsigned long iobase; /* I/O base address */
+ unsigned char __iomem *membase; /* mapped MMIO base address */
+ } u;
+ enum dio200_regtype regtype;
};
/*
@@ -269,13 +380,14 @@
enum dio200_model {
pc212e_model,
pc214e_model,
- pc215e_model, pci215_model,
+ pc215e_model, pci215_model, pcie215_model,
pc218e_model,
+ pcie236_model,
pc272e_model, pci272_model,
- anypci_model
+ pcie296_model,
};
-enum dio200_layout {
+enum dio200_layout_idx {
#if DO_ISA
pc212_layout,
pc214_layout,
@@ -284,7 +396,12 @@
#if DO_ISA
pc218_layout,
#endif
- pc272_layout
+ pc272_layout,
+#if DO_PCI
+ pcie215_layout,
+ pcie236_layout,
+ pcie296_layout,
+#endif
};
struct dio200_board {
@@ -292,7 +409,10 @@
unsigned short devid;
enum dio200_bustype bustype;
enum dio200_model model;
- enum dio200_layout layout;
+ enum dio200_layout_idx layout;
+ unsigned char mainbar;
+ unsigned char mainshift;
+ unsigned int mainsize;
};
static const struct dio200_board dio200_boards[] = {
@@ -302,30 +422,35 @@
.bustype = isa_bustype,
.model = pc212e_model,
.layout = pc212_layout,
+ .mainsize = DIO200_IO_SIZE,
},
{
.name = "pc214e",
.bustype = isa_bustype,
.model = pc214e_model,
.layout = pc214_layout,
+ .mainsize = DIO200_IO_SIZE,
},
{
.name = "pc215e",
.bustype = isa_bustype,
.model = pc215e_model,
.layout = pc215_layout,
+ .mainsize = DIO200_IO_SIZE,
},
{
.name = "pc218e",
.bustype = isa_bustype,
.model = pc218e_model,
.layout = pc218_layout,
+ .mainsize = DIO200_IO_SIZE,
},
{
.name = "pc272e",
.bustype = isa_bustype,
.model = pc272e_model,
.layout = pc272_layout,
+ .mainsize = DIO200_IO_SIZE,
},
#endif
#if DO_PCI
@@ -335,6 +460,8 @@
.bustype = pci_bustype,
.model = pci215_model,
.layout = pc215_layout,
+ .mainbar = 2,
+ .mainsize = DIO200_IO_SIZE,
},
{
.name = "pci272",
@@ -342,12 +469,38 @@
.bustype = pci_bustype,
.model = pci272_model,
.layout = pc272_layout,
+ .mainbar = 2,
+ .mainsize = DIO200_IO_SIZE,
},
{
- .name = DIO200_DRIVER_NAME,
- .devid = PCI_DEVICE_ID_INVALID,
+ .name = "pcie215",
+ .devid = PCI_DEVICE_ID_AMPLICON_PCIE215,
.bustype = pci_bustype,
- .model = anypci_model, /* wildcard */
+ .model = pcie215_model,
+ .layout = pcie215_layout,
+ .mainbar = 1,
+ .mainshift = 3,
+ .mainsize = DIO200_PCIE_IO_SIZE,
+ },
+ {
+ .name = "pcie236",
+ .devid = PCI_DEVICE_ID_AMPLICON_PCIE236,
+ .bustype = pci_bustype,
+ .model = pcie236_model,
+ .layout = pcie236_layout,
+ .mainbar = 1,
+ .mainshift = 3,
+ .mainsize = DIO200_PCIE_IO_SIZE,
+ },
+ {
+ .name = "pcie296",
+ .devid = PCI_DEVICE_ID_AMPLICON_PCIE296,
+ .bustype = pci_bustype,
+ .model = pcie296_model,
+ .layout = pcie296_layout,
+ .mainbar = 1,
+ .mainshift = 3,
+ .mainsize = DIO200_PCIE_IO_SIZE,
},
#endif
};
@@ -357,20 +510,21 @@
* layout.
*/
-enum dio200_sdtype { sd_none, sd_intr, sd_8255, sd_8254 };
+enum dio200_sdtype { sd_none, sd_intr, sd_8255, sd_8254, sd_timer };
-#define DIO200_MAX_SUBDEVS 7
+#define DIO200_MAX_SUBDEVS 8
#define DIO200_MAX_ISNS 6
-struct dio200_layout_struct {
+struct dio200_layout {
unsigned short n_subdevs; /* number of subdevices */
unsigned char sdtype[DIO200_MAX_SUBDEVS]; /* enum dio200_sdtype */
unsigned char sdinfo[DIO200_MAX_SUBDEVS]; /* depends on sdtype */
char has_int_sce; /* has interrupt enable/status register */
char has_clk_gat_sce; /* has clock/gate selection registers */
+ char has_enhancements; /* has enhanced features */
};
-static const struct dio200_layout_struct dio200_layouts[] = {
+static const struct dio200_layout dio200_layouts[] = {
#if DO_ISA
[pc212_layout] = {
.n_subdevs = 6,
@@ -421,6 +575,38 @@
.has_int_sce = 1,
.has_clk_gat_sce = 0,
},
+#if DO_PCI
+ [pcie215_layout] = {
+ .n_subdevs = 8,
+ .sdtype = {sd_8255, sd_none, sd_8255, sd_none,
+ sd_8254, sd_8254, sd_timer, sd_intr},
+ .sdinfo = {0x00, 0x00, 0x08, 0x00,
+ 0x10, 0x14, 0x00, 0x3F},
+ .has_int_sce = 1,
+ .has_clk_gat_sce = 1,
+ .has_enhancements = 1,
+ },
+ [pcie236_layout] = {
+ .n_subdevs = 8,
+ .sdtype = {sd_8255, sd_none, sd_none, sd_none,
+ sd_8254, sd_8254, sd_timer, sd_intr},
+ .sdinfo = {0x00, 0x00, 0x00, 0x00,
+ 0x10, 0x14, 0x00, 0x3F},
+ .has_int_sce = 1,
+ .has_clk_gat_sce = 1,
+ .has_enhancements = 1,
+ },
+ [pcie296_layout] = {
+ .n_subdevs = 8,
+ .sdtype = {sd_8255, sd_8255, sd_8255, sd_8255,
+ sd_8254, sd_8254, sd_timer, sd_intr},
+ .sdinfo = {0x00, 0x04, 0x08, 0x0C,
+ 0x10, 0x14, 0x00, 0x3F},
+ .has_int_sce = 1,
+ .has_clk_gat_sce = 1,
+ .has_enhancements = 1,
+ },
+#endif
};
/* this structure is for data unique to this hardware driver. If
@@ -428,31 +614,46 @@
feel free to suggest moving the variable to the struct comedi_device struct.
*/
struct dio200_private {
+ struct dio200_region io; /* Register region */
int intr_sd;
};
struct dio200_subdev_8254 {
- unsigned long iobase; /* Counter base address */
- unsigned long clk_sce_iobase; /* CLK_SCE base address */
- unsigned long gat_sce_iobase; /* GAT_SCE base address */
- int which; /* Bit 5 of CLK_SCE or GAT_SCE */
- int has_clk_gat_sce;
- unsigned clock_src[3]; /* Current clock sources */
- unsigned gate_src[3]; /* Current gate sources */
+ unsigned int ofs; /* Counter base offset */
+ unsigned int clk_sce_ofs; /* CLK_SCE base address */
+ unsigned int gat_sce_ofs; /* GAT_SCE base address */
+ int which; /* Bit 5 of CLK_SCE or GAT_SCE */
+ unsigned int clock_src[3]; /* Current clock sources */
+ unsigned int gate_src[3]; /* Current gate sources */
spinlock_t spinlock;
};
+struct dio200_subdev_8255 {
+ unsigned int ofs; /* DIO base offset */
+};
+
struct dio200_subdev_intr {
- unsigned long iobase;
+ unsigned int ofs;
spinlock_t spinlock;
int active;
- int has_int_sce;
unsigned int valid_isns;
unsigned int enabled_isns;
unsigned int stopcount;
int continuous;
};
+static inline const struct dio200_layout *
+dio200_board_layout(const struct dio200_board *board)
+{
+ return &dio200_layouts[board->layout];
+}
+
+static inline const struct dio200_layout *
+dio200_dev_layout(struct comedi_device *dev)
+{
+ return dio200_board_layout(comedi_board(dev));
+}
+
static inline bool is_pci_board(const struct dio200_board *board)
{
return DO_PCI && board->bustype == pci_bustype;
@@ -464,6 +665,70 @@
}
/*
+ * Read 8-bit register.
+ */
+static unsigned char dio200_read8(struct comedi_device *dev,
+ unsigned int offset)
+{
+ const struct dio200_board *thisboard = comedi_board(dev);
+ struct dio200_private *devpriv = dev->private;
+
+ offset <<= thisboard->mainshift;
+ if (devpriv->io.regtype == io_regtype)
+ return inb(devpriv->io.u.iobase + offset);
+ else
+ return readb(devpriv->io.u.membase + offset);
+}
+
+/*
+ * Write 8-bit register.
+ */
+static void dio200_write8(struct comedi_device *dev, unsigned int offset,
+ unsigned char val)
+{
+ const struct dio200_board *thisboard = comedi_board(dev);
+ struct dio200_private *devpriv = dev->private;
+
+ offset <<= thisboard->mainshift;
+ if (devpriv->io.regtype == io_regtype)
+ outb(val, devpriv->io.u.iobase + offset);
+ else
+ writeb(val, devpriv->io.u.membase + offset);
+}
+
+/*
+ * Read 32-bit register.
+ */
+static unsigned int dio200_read32(struct comedi_device *dev,
+ unsigned int offset)
+{
+ const struct dio200_board *thisboard = comedi_board(dev);
+ struct dio200_private *devpriv = dev->private;
+
+ offset <<= thisboard->mainshift;
+ if (devpriv->io.regtype == io_regtype)
+ return inl(devpriv->io.u.iobase + offset);
+ else
+ return readl(devpriv->io.u.membase + offset);
+}
+
+/*
+ * Write 32-bit register.
+ */
+static void dio200_write32(struct comedi_device *dev, unsigned int offset,
+ unsigned int val)
+{
+ const struct dio200_board *thisboard = comedi_board(dev);
+ struct dio200_private *devpriv = dev->private;
+
+ offset <<= thisboard->mainshift;
+ if (devpriv->io.regtype == io_regtype)
+ outl(val, devpriv->io.u.iobase + offset);
+ else
+ writel(val, devpriv->io.u.membase + offset);
+}
+
+/*
* This function looks for a board matching the supplied PCI device.
*/
static const struct dio200_board *
@@ -479,49 +744,6 @@
}
/*
- * This function looks for a PCI device matching the requested board name,
- * bus and slot.
- */
-static struct pci_dev *dio200_find_pci_dev(struct comedi_device *dev,
- struct comedi_devconfig *it)
-{
- const struct dio200_board *thisboard = comedi_board(dev);
- struct pci_dev *pci_dev = NULL;
- int bus = it->options[0];
- int slot = it->options[1];
-
- for_each_pci_dev(pci_dev) {
- if (bus || slot) {
- if (bus != pci_dev->bus->number ||
- slot != PCI_SLOT(pci_dev->devfn))
- continue;
- }
- if (pci_dev->vendor != PCI_VENDOR_ID_AMPLICON)
- continue;
-
- if (thisboard->model == anypci_model) {
- /* Wildcard board matches any supported PCI board. */
- const struct dio200_board *foundboard;
-
- foundboard = dio200_find_pci_board(pci_dev);
- if (foundboard == NULL)
- continue;
- /* Replace wildcard board_ptr. */
- dev->board_ptr = foundboard;
- } else {
- /* Match specific model name. */
- if (pci_dev->device != thisboard->devid)
- continue;
- }
- return pci_dev;
- }
- dev_err(dev->class_dev,
- "No supported board found! (req. bus %d, slot %d)\n",
- bus, slot);
- return NULL;
-}
-
-/*
* This function checks and requests an I/O region, reporting an error
* if there is a conflict.
*/
@@ -545,11 +767,12 @@
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
+ const struct dio200_layout *layout = dio200_dev_layout(dev);
struct dio200_subdev_intr *subpriv = s->private;
- if (subpriv->has_int_sce) {
+ if (layout->has_int_sce) {
/* Just read the interrupt status register. */
- data[1] = inb(subpriv->iobase) & subpriv->valid_isns;
+ data[1] = dio200_read8(dev, subpriv->ofs) & subpriv->valid_isns;
} else {
/* No interrupt status register. */
data[0] = 0;
@@ -564,12 +787,13 @@
static void dio200_stop_intr(struct comedi_device *dev,
struct comedi_subdevice *s)
{
+ const struct dio200_layout *layout = dio200_dev_layout(dev);
struct dio200_subdev_intr *subpriv = s->private;
subpriv->active = 0;
subpriv->enabled_isns = 0;
- if (subpriv->has_int_sce)
- outb(0, subpriv->iobase);
+ if (layout->has_int_sce)
+ dio200_write8(dev, subpriv->ofs, 0);
}
/*
@@ -580,6 +804,7 @@
{
unsigned int n;
unsigned isn_bits;
+ const struct dio200_layout *layout = dio200_dev_layout(dev);
struct dio200_subdev_intr *subpriv = s->private;
struct comedi_cmd *cmd = &s->async->cmd;
int retval = 0;
@@ -599,8 +824,8 @@
isn_bits &= subpriv->valid_isns;
/* Enable interrupt sources. */
subpriv->enabled_isns = isn_bits;
- if (subpriv->has_int_sce)
- outb(isn_bits, subpriv->iobase);
+ if (layout->has_int_sce)
+ dio200_write8(dev, subpriv->ofs, isn_bits);
}
return retval;
@@ -642,6 +867,7 @@
static int dio200_handle_read_intr(struct comedi_device *dev,
struct comedi_subdevice *s)
{
+ const struct dio200_layout *layout = dio200_dev_layout(dev);
struct dio200_subdev_intr *subpriv = s->private;
unsigned triggered;
unsigned intstat;
@@ -653,7 +879,7 @@
spin_lock_irqsave(&subpriv->spinlock, flags);
oldevents = s->async->events;
- if (subpriv->has_int_sce) {
+ if (layout->has_int_sce) {
/*
* Collect interrupt sources that have triggered and disable
* them temporarily. Loop around until no extra interrupt
@@ -665,11 +891,11 @@
* loop in case of misconfiguration.
*/
cur_enabled = subpriv->enabled_isns;
- while ((intstat = (inb(subpriv->iobase) & subpriv->valid_isns
- & ~triggered)) != 0) {
+ while ((intstat = (dio200_read8(dev, subpriv->ofs) &
+ subpriv->valid_isns & ~triggered)) != 0) {
triggered |= intstat;
cur_enabled &= ~triggered;
- outb(cur_enabled, subpriv->iobase);
+ dio200_write8(dev, subpriv->ofs, cur_enabled);
}
} else {
/*
@@ -687,8 +913,8 @@
* Reenable them NOW to minimize the time they are disabled.
*/
cur_enabled = subpriv->enabled_isns;
- if (subpriv->has_int_sce)
- outb(cur_enabled, subpriv->iobase);
+ if (layout->has_int_sce)
+ dio200_write8(dev, subpriv->ofs, cur_enabled);
if (subpriv->active) {
/*
@@ -794,41 +1020,19 @@
if (err)
return 2;
- /* step 3: make sure arguments are trivially compatible */
+ /* Step 3: check if arguments are trivially valid */
- /* cmd->start_src == TRIG_NOW || cmd->start_src == TRIG_INT */
- if (cmd->start_arg != 0) {
- cmd->start_arg = 0;
- err++;
- }
-
- /* cmd->scan_begin_src == TRIG_EXT */
- if (cmd->scan_begin_arg != 0) {
- cmd->scan_begin_arg = 0;
- err++;
- }
-
- /* cmd->convert_src == TRIG_NOW */
- if (cmd->convert_arg != 0) {
- cmd->convert_arg = 0;
- err++;
- }
-
- /* cmd->scan_end_src == TRIG_COUNT */
- if (cmd->scan_end_arg != cmd->chanlist_len) {
- cmd->scan_end_arg = cmd->chanlist_len;
- err++;
- }
+ err |= cfc_check_trigger_arg_is(&cmd->start_arg, 0);
+ err |= cfc_check_trigger_arg_is(&cmd->scan_begin_arg, 0);
+ err |= cfc_check_trigger_arg_is(&cmd->convert_arg, 0);
+ err |= cfc_check_trigger_arg_is(&cmd->scan_end_arg, cmd->chanlist_len);
switch (cmd->stop_src) {
case TRIG_COUNT:
/* any count allowed */
break;
case TRIG_NONE:
- if (cmd->stop_arg != 0) {
- cmd->stop_arg = 0;
- err++;
- }
+ err |= cfc_check_trigger_arg_is(&cmd->stop_arg, 0);
break;
default:
break;
@@ -894,9 +1098,9 @@
*/
static int
dio200_subdev_intr_init(struct comedi_device *dev, struct comedi_subdevice *s,
- unsigned long iobase, unsigned valid_isns,
- int has_int_sce)
+ unsigned int offset, unsigned valid_isns)
{
+ const struct dio200_layout *layout = dio200_dev_layout(dev);
struct dio200_subdev_intr *subpriv;
subpriv = kzalloc(sizeof(*subpriv), GFP_KERNEL);
@@ -904,18 +1108,18 @@
dev_err(dev->class_dev, "error! out of memory!\n");
return -ENOMEM;
}
- subpriv->iobase = iobase;
- subpriv->has_int_sce = has_int_sce;
+ subpriv->ofs = offset;
subpriv->valid_isns = valid_isns;
spin_lock_init(&subpriv->spinlock);
- if (has_int_sce)
- outb(0, subpriv->iobase); /* Disable interrupt sources. */
+ if (layout->has_int_sce)
+ /* Disable interrupt sources. */
+ dio200_write8(dev, subpriv->ofs, 0);
s->private = subpriv;
s->type = COMEDI_SUBD_DI;
s->subdev_flags = SDF_READABLE | SDF_CMD_READ;
- if (has_int_sce) {
+ if (layout->has_int_sce) {
s->n_chan = DIO200_MAX_ISNS;
s->len_chanlist = DIO200_MAX_ISNS;
} else {
@@ -968,6 +1172,73 @@
}
/*
+ * Read an '8254' counter subdevice channel.
+ */
+static unsigned int
+dio200_subdev_8254_read_chan(struct comedi_device *dev,
+ struct comedi_subdevice *s, unsigned int chan)
+{
+ struct dio200_subdev_8254 *subpriv = s->private;
+ unsigned int val;
+
+ /* latch counter */
+ val = chan << 6;
+ dio200_write8(dev, subpriv->ofs + i8254_control_reg, val);
+ /* read lsb, msb */
+ val = dio200_read8(dev, subpriv->ofs + chan);
+ val += dio200_read8(dev, subpriv->ofs + chan) << 8;
+ return val;
+}
+
+/*
+ * Write an '8254' subdevice channel.
+ */
+static void
+dio200_subdev_8254_write_chan(struct comedi_device *dev,
+ struct comedi_subdevice *s, unsigned int chan,
+ unsigned int count)
+{
+ struct dio200_subdev_8254 *subpriv = s->private;
+
+ /* write lsb, msb */
+ dio200_write8(dev, subpriv->ofs + chan, count & 0xff);
+ dio200_write8(dev, subpriv->ofs + chan, (count >> 8) & 0xff);
+}
+
+/*
+ * Set mode of an '8254' subdevice channel.
+ */
+static void
+dio200_subdev_8254_set_mode(struct comedi_device *dev,
+ struct comedi_subdevice *s, unsigned int chan,
+ unsigned int mode)
+{
+ struct dio200_subdev_8254 *subpriv = s->private;
+ unsigned int byte;
+
+ byte = chan << 6;
+ byte |= 0x30; /* access order: lsb, msb */
+ byte |= (mode & 0xf); /* counter mode and BCD|binary */
+ dio200_write8(dev, subpriv->ofs + i8254_control_reg, byte);
+}
+
+/*
+ * Read status byte of an '8254' counter subdevice channel.
+ */
+static unsigned int
+dio200_subdev_8254_status(struct comedi_device *dev,
+ struct comedi_subdevice *s, unsigned int chan)
+{
+ struct dio200_subdev_8254 *subpriv = s->private;
+
+ /* latch status */
+ dio200_write8(dev, subpriv->ofs + i8254_control_reg,
+ 0xe0 | (2 << chan));
+ /* read status */
+ return dio200_read8(dev, subpriv->ofs + chan);
+}
+
+/*
* Handle 'insn_read' for an '8254' counter subdevice.
*/
static int
@@ -976,13 +1247,15 @@
{
struct dio200_subdev_8254 *subpriv = s->private;
int chan = CR_CHAN(insn->chanspec);
+ unsigned int n;
unsigned long flags;
- spin_lock_irqsave(&subpriv->spinlock, flags);
- data[0] = i8254_read(subpriv->iobase, 0, chan);
- spin_unlock_irqrestore(&subpriv->spinlock, flags);
-
- return 1;
+ for (n = 0; n < insn->n; n++) {
+ spin_lock_irqsave(&subpriv->spinlock, flags);
+ data[n] = dio200_subdev_8254_read_chan(dev, s, chan);
+ spin_unlock_irqrestore(&subpriv->spinlock, flags);
+ }
+ return insn->n;
}
/*
@@ -994,34 +1267,40 @@
{
struct dio200_subdev_8254 *subpriv = s->private;
int chan = CR_CHAN(insn->chanspec);
+ unsigned int n;
unsigned long flags;
- spin_lock_irqsave(&subpriv->spinlock, flags);
- i8254_write(subpriv->iobase, 0, chan, data[0]);
- spin_unlock_irqrestore(&subpriv->spinlock, flags);
-
- return 1;
+ for (n = 0; n < insn->n; n++) {
+ spin_lock_irqsave(&subpriv->spinlock, flags);
+ dio200_subdev_8254_write_chan(dev, s, chan, data[n]);
+ spin_unlock_irqrestore(&subpriv->spinlock, flags);
+ }
+ return insn->n;
}
/*
* Set gate source for an '8254' counter subdevice channel.
*/
static int
-dio200_set_gate_src(struct dio200_subdev_8254 *subpriv,
- unsigned int counter_number, unsigned int gate_src)
+dio200_subdev_8254_set_gate_src(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ unsigned int counter_number,
+ unsigned int gate_src)
{
+ const struct dio200_layout *layout = dio200_dev_layout(dev);
+ struct dio200_subdev_8254 *subpriv = s->private;
unsigned char byte;
- if (!subpriv->has_clk_gat_sce)
+ if (!layout->has_clk_gat_sce)
return -1;
if (counter_number > 2)
return -1;
- if (gate_src > 7)
+ if (gate_src > (layout->has_enhancements ? 31 : 7))
return -1;
subpriv->gate_src[counter_number] = gate_src;
- byte = GAT_SCE(subpriv->which, counter_number, gate_src);
- outb(byte, subpriv->gat_sce_iobase);
+ byte = gat_sce(subpriv->which, counter_number, gate_src);
+ dio200_write8(dev, subpriv->gat_sce_ofs, byte);
return 0;
}
@@ -1030,10 +1309,14 @@
* Get gate source for an '8254' counter subdevice channel.
*/
static int
-dio200_get_gate_src(struct dio200_subdev_8254 *subpriv,
- unsigned int counter_number)
+dio200_subdev_8254_get_gate_src(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ unsigned int counter_number)
{
- if (!subpriv->has_clk_gat_sce)
+ const struct dio200_layout *layout = dio200_dev_layout(dev);
+ struct dio200_subdev_8254 *subpriv = s->private;
+
+ if (!layout->has_clk_gat_sce)
return -1;
if (counter_number > 2)
return -1;
@@ -1045,21 +1328,25 @@
* Set clock source for an '8254' counter subdevice channel.
*/
static int
-dio200_set_clock_src(struct dio200_subdev_8254 *subpriv,
- unsigned int counter_number, unsigned int clock_src)
+dio200_subdev_8254_set_clock_src(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ unsigned int counter_number,
+ unsigned int clock_src)
{
+ const struct dio200_layout *layout = dio200_dev_layout(dev);
+ struct dio200_subdev_8254 *subpriv = s->private;
unsigned char byte;
- if (!subpriv->has_clk_gat_sce)
+ if (!layout->has_clk_gat_sce)
return -1;
if (counter_number > 2)
return -1;
- if (clock_src > 7)
+ if (clock_src > (layout->has_enhancements ? 31 : 7))
return -1;
subpriv->clock_src[counter_number] = clock_src;
- byte = CLK_SCE(subpriv->which, counter_number, clock_src);
- outb(byte, subpriv->clk_sce_iobase);
+ byte = clk_sce(subpriv->which, counter_number, clock_src);
+ dio200_write8(dev, subpriv->clk_sce_ofs, byte);
return 0;
}
@@ -1068,12 +1355,16 @@
* Get clock source for an '8254' counter subdevice channel.
*/
static int
-dio200_get_clock_src(struct dio200_subdev_8254 *subpriv,
- unsigned int counter_number, unsigned int *period_ns)
+dio200_subdev_8254_get_clock_src(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ unsigned int counter_number,
+ unsigned int *period_ns)
{
+ const struct dio200_layout *layout = dio200_dev_layout(dev);
+ struct dio200_subdev_8254 *subpriv = s->private;
unsigned clock_src;
- if (!subpriv->has_clk_gat_sce)
+ if (!layout->has_clk_gat_sce)
return -1;
if (counter_number > 2)
return -1;
@@ -1098,20 +1389,21 @@
spin_lock_irqsave(&subpriv->spinlock, flags);
switch (data[0]) {
case INSN_CONFIG_SET_COUNTER_MODE:
- ret = i8254_set_mode(subpriv->iobase, 0, chan, data[1]);
- if (ret < 0)
+ if (data[1] > (I8254_MODE5 | I8254_BINARY))
ret = -EINVAL;
+ else
+ dio200_subdev_8254_set_mode(dev, s, chan, data[1]);
break;
case INSN_CONFIG_8254_READ_STATUS:
- data[1] = i8254_status(subpriv->iobase, 0, chan);
+ data[1] = dio200_subdev_8254_status(dev, s, chan);
break;
case INSN_CONFIG_SET_GATE_SRC:
- ret = dio200_set_gate_src(subpriv, chan, data[2]);
+ ret = dio200_subdev_8254_set_gate_src(dev, s, chan, data[2]);
if (ret < 0)
ret = -EINVAL;
break;
case INSN_CONFIG_GET_GATE_SRC:
- ret = dio200_get_gate_src(subpriv, chan);
+ ret = dio200_subdev_8254_get_gate_src(dev, s, chan);
if (ret < 0) {
ret = -EINVAL;
break;
@@ -1119,12 +1411,12 @@
data[2] = ret;
break;
case INSN_CONFIG_SET_CLOCK_SRC:
- ret = dio200_set_clock_src(subpriv, chan, data[1]);
+ ret = dio200_subdev_8254_set_clock_src(dev, s, chan, data[1]);
if (ret < 0)
ret = -EINVAL;
break;
case INSN_CONFIG_GET_CLOCK_SRC:
- ret = dio200_get_clock_src(subpriv, chan, &data[2]);
+ ret = dio200_subdev_8254_get_clock_src(dev, s, chan, &data[2]);
if (ret < 0) {
ret = -EINVAL;
break;
@@ -1141,15 +1433,12 @@
/*
* This function initializes an '8254' counter subdevice.
- *
- * Note: iobase is the base address of the board, not the subdevice;
- * offset is the offset to the 8254 chip.
*/
static int
dio200_subdev_8254_init(struct comedi_device *dev, struct comedi_subdevice *s,
- unsigned long iobase, unsigned offset,
- int has_clk_gat_sce)
+ unsigned int offset)
{
+ const struct dio200_layout *layout = dio200_dev_layout(dev);
struct dio200_subdev_8254 *subpriv;
unsigned int chan;
@@ -1169,27 +1458,24 @@
s->insn_config = dio200_subdev_8254_config;
spin_lock_init(&subpriv->spinlock);
- subpriv->iobase = offset + iobase;
- subpriv->has_clk_gat_sce = has_clk_gat_sce;
- if (has_clk_gat_sce) {
+ subpriv->ofs = offset;
+ if (layout->has_clk_gat_sce) {
/* Derive CLK_SCE and GAT_SCE register offsets from
* 8254 offset. */
- subpriv->clk_sce_iobase =
- DIO200_XCLK_SCE + (offset >> 3) + iobase;
- subpriv->gat_sce_iobase =
- DIO200_XGAT_SCE + (offset >> 3) + iobase;
+ subpriv->clk_sce_ofs = DIO200_XCLK_SCE + (offset >> 3);
+ subpriv->gat_sce_ofs = DIO200_XGAT_SCE + (offset >> 3);
subpriv->which = (offset >> 2) & 1;
}
/* Initialize channels. */
for (chan = 0; chan < 3; chan++) {
- i8254_set_mode(subpriv->iobase, 0, chan,
- I8254_MODE0 | I8254_BINARY);
- if (subpriv->has_clk_gat_sce) {
+ dio200_subdev_8254_set_mode(dev, s, chan,
+ I8254_MODE0 | I8254_BINARY);
+ if (layout->has_clk_gat_sce) {
/* Gate source 0 is VCC (logic 1). */
- dio200_set_gate_src(subpriv, chan, 0);
+ dio200_subdev_8254_set_gate_src(dev, s, chan, 0);
/* Clock source 0 is the dedicated clock input. */
- dio200_set_clock_src(subpriv, chan, 0);
+ dio200_subdev_8254_set_clock_src(dev, s, chan, 0);
}
}
@@ -1207,16 +1493,294 @@
kfree(subpriv);
}
+/*
+ * This function sets I/O directions for an '8255' DIO subdevice.
+ */
+static void dio200_subdev_8255_set_dir(struct comedi_device *dev,
+ struct comedi_subdevice *s)
+{
+ struct dio200_subdev_8255 *subpriv = s->private;
+ int config;
+
+ config = CR_CW;
+ /* 1 in io_bits indicates output, 1 in config indicates input */
+ if (!(s->io_bits & 0x0000ff))
+ config |= CR_A_IO;
+ if (!(s->io_bits & 0x00ff00))
+ config |= CR_B_IO;
+ if (!(s->io_bits & 0x0f0000))
+ config |= CR_C_LO_IO;
+ if (!(s->io_bits & 0xf00000))
+ config |= CR_C_HI_IO;
+ dio200_write8(dev, subpriv->ofs + 3, config);
+}
+
+/*
+ * Handle 'insn_bits' for an '8255' DIO subdevice.
+ */
+static int dio200_subdev_8255_bits(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn, unsigned int *data)
+{
+ struct dio200_subdev_8255 *subpriv = s->private;
+
+ if (data[0]) {
+ s->state &= ~data[0];
+ s->state |= (data[0] & data[1]);
+ if (data[0] & 0xff)
+ dio200_write8(dev, subpriv->ofs, s->state & 0xff);
+ if (data[0] & 0xff00)
+ dio200_write8(dev, subpriv->ofs + 1,
+ (s->state >> 8) & 0xff);
+ if (data[0] & 0xff0000)
+ dio200_write8(dev, subpriv->ofs + 2,
+ (s->state >> 16) & 0xff);
+ }
+ data[1] = dio200_read8(dev, subpriv->ofs);
+ data[1] |= dio200_read8(dev, subpriv->ofs + 1) << 8;
+ data[1] |= dio200_read8(dev, subpriv->ofs + 2) << 16;
+ return 2;
+}
+
+/*
+ * Handle 'insn_config' for an '8255' DIO subdevice.
+ */
+static int dio200_subdev_8255_config(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
+{
+ unsigned int mask;
+ unsigned int bits;
+
+ mask = 1 << CR_CHAN(insn->chanspec);
+ if (mask & 0x0000ff)
+ bits = 0x0000ff;
+ else if (mask & 0x00ff00)
+ bits = 0x00ff00;
+ else if (mask & 0x0f0000)
+ bits = 0x0f0000;
+ else
+ bits = 0xf00000;
+ switch (data[0]) {
+ case INSN_CONFIG_DIO_INPUT:
+ s->io_bits &= ~bits;
+ break;
+ case INSN_CONFIG_DIO_OUTPUT:
+ s->io_bits |= bits;
+ break;
+ case INSN_CONFIG_DIO_QUERY:
+ data[1] = (s->io_bits & bits) ? COMEDI_OUTPUT : COMEDI_INPUT;
+ return insn->n;
+ break;
+ default:
+ return -EINVAL;
+ }
+ dio200_subdev_8255_set_dir(dev, s);
+ return 1;
+}
+
+/*
+ * This function initializes an '8255' DIO subdevice.
+ *
+ * offset is the offset to the 8255 chip.
+ */
+static int dio200_subdev_8255_init(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ unsigned int offset)
+{
+ struct dio200_subdev_8255 *subpriv;
+
+ subpriv = kzalloc(sizeof(*subpriv), GFP_KERNEL);
+ if (!subpriv)
+ return -ENOMEM;
+ subpriv->ofs = offset;
+ s->private = subpriv;
+ s->type = COMEDI_SUBD_DIO;
+ s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
+ s->n_chan = 24;
+ s->range_table = &range_digital;
+ s->maxdata = 1;
+ s->insn_bits = dio200_subdev_8255_bits;
+ s->insn_config = dio200_subdev_8255_config;
+ s->state = 0;
+ s->io_bits = 0;
+ dio200_subdev_8255_set_dir(dev, s);
+ return 0;
+}
+
+/*
+ * This function cleans up an '8255' DIO subdevice.
+ */
+static void dio200_subdev_8255_cleanup(struct comedi_device *dev,
+ struct comedi_subdevice *s)
+{
+ struct dio200_subdev_8255 *subpriv = s->private;
+
+ kfree(subpriv);
+}
+
+/*
+ * Handle 'insn_read' for a timer subdevice.
+ */
+static int dio200_subdev_timer_read(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
+{
+ unsigned int n;
+
+ for (n = 0; n < insn->n; n++)
+ data[n] = dio200_read32(dev, DIO200_TS_COUNT);
+ return n;
+}
+
+/*
+ * Reset timer subdevice.
+ */
+static void dio200_subdev_timer_reset(struct comedi_device *dev,
+ struct comedi_subdevice *s)
+{
+ unsigned int clock;
+
+ clock = dio200_read32(dev, DIO200_TS_CONFIG) & TS_CONFIG_CLK_SRC_MASK;
+ dio200_write32(dev, DIO200_TS_CONFIG, clock | TS_CONFIG_RESET);
+ dio200_write32(dev, DIO200_TS_CONFIG, clock);
+}
+
+/*
+ * Get timer subdevice clock source and period.
+ */
+static void dio200_subdev_timer_get_clock_src(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ unsigned int *src,
+ unsigned int *period)
+{
+ unsigned int clk;
+
+ clk = dio200_read32(dev, DIO200_TS_CONFIG) & TS_CONFIG_CLK_SRC_MASK;
+ *src = clk;
+ *period = (clk < ARRAY_SIZE(ts_clock_period)) ?
+ ts_clock_period[clk] : 0;
+}
+
+/*
+ * Set timer subdevice clock source.
+ */
+static int dio200_subdev_timer_set_clock_src(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ unsigned int src)
+{
+ if (src > TS_CONFIG_MAX_CLK_SRC)
+ return -EINVAL;
+ dio200_write32(dev, DIO200_TS_CONFIG, src);
+ return 0;
+}
+
+/*
+ * Handle 'insn_config' for a timer subdevice.
+ */
+static int dio200_subdev_timer_config(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
+{
+ int ret = 0;
+
+ switch (data[0]) {
+ case INSN_CONFIG_RESET:
+ dio200_subdev_timer_reset(dev, s);
+ break;
+ case INSN_CONFIG_SET_CLOCK_SRC:
+ ret = dio200_subdev_timer_set_clock_src(dev, s, data[1]);
+ if (ret < 0)
+ ret = -EINVAL;
+ break;
+ case INSN_CONFIG_GET_CLOCK_SRC:
+ dio200_subdev_timer_get_clock_src(dev, s, &data[1], &data[2]);
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+ return ret < 0 ? ret : insn->n;
+}
+
+/*
+ * This function initializes a timer subdevice.
+ *
+ * Uses the timestamp timer registers. There is only one timestamp timer.
+ */
+static int dio200_subdev_timer_init(struct comedi_device *dev,
+ struct comedi_subdevice *s)
+{
+ s->type = COMEDI_SUBD_TIMER;
+ s->subdev_flags = SDF_READABLE | SDF_LSAMPL;
+ s->n_chan = 1;
+ s->maxdata = 0xFFFFFFFF;
+ s->insn_read = dio200_subdev_timer_read;
+ s->insn_config = dio200_subdev_timer_config;
+ return 0;
+}
+
+/*
+ * This function cleans up a timer subdevice.
+ */
+static void dio200_subdev_timer_cleanup(struct comedi_device *dev,
+ struct comedi_subdevice *s)
+{
+ /* Nothing to do. */
+}
+
+/*
+ * This function does some special set-up for the PCIe boards
+ * PCIe215, PCIe236, PCIe296.
+ */
+static int dio200_pcie_board_setup(struct comedi_device *dev)
+{
+ struct pci_dev *pcidev = comedi_to_pci_dev(dev);
+ void __iomem *brbase;
+ resource_size_t brlen;
+
+ /*
+ * The board uses Altera Cyclone IV with PCI-Express hard IP.
+ * The FPGA configuration has the PCI-Express Avalon-MM Bridge
+ * Control registers in PCI BAR 0, offset 0, and the length of
+ * these registers is 0x4000.
+ *
+ * We need to write 0x80 to the "Avalon-MM to PCI-Express Interrupt
+ * Enable" register at offset 0x50 to allow generation of PCIe
+ * interrupts when RXmlrq_i is asserted in the SOPC Builder system.
+ */
+ brlen = pci_resource_len(pcidev, 0);
+ if (brlen < 0x4000 ||
+ !(pci_resource_flags(pcidev, 0) & IORESOURCE_MEM)) {
+ dev_err(dev->class_dev, "error! bad PCI region!\n");
+ return -EINVAL;
+ }
+ brbase = ioremap_nocache(pci_resource_start(pcidev, 0), brlen);
+ if (!brbase) {
+ dev_err(dev->class_dev, "error! failed to map registers!\n");
+ return -ENOMEM;
+ }
+ writel(0x80, brbase + 0x50);
+ iounmap(brbase);
+ /* Enable "enhanced" features of board. */
+ dio200_write8(dev, DIO200_ENHANCE, 1);
+ return 0;
+}
+
static void dio200_report_attach(struct comedi_device *dev, unsigned int irq)
{
const struct dio200_board *thisboard = comedi_board(dev);
+ struct dio200_private *devpriv = dev->private;
struct pci_dev *pcidev = comedi_to_pci_dev(dev);
char tmpbuf[60];
int tmplen;
if (is_isa_board(thisboard))
tmplen = scnprintf(tmpbuf, sizeof(tmpbuf),
- "(base %#lx) ", dev->iobase);
+ "(base %#lx) ", devpriv->io.u.iobase);
else if (is_pci_board(thisboard))
tmplen = scnprintf(tmpbuf, sizeof(tmpbuf),
"(pci %s) ", pci_name(pcidev));
@@ -1232,20 +1796,18 @@
dev_info(dev->class_dev, "%s %sattached\n", dev->board_name, tmpbuf);
}
-static int dio200_common_attach(struct comedi_device *dev, unsigned long iobase,
- unsigned int irq, unsigned long req_irq_flags)
+static int dio200_common_attach(struct comedi_device *dev, unsigned int irq,
+ unsigned long req_irq_flags)
{
const struct dio200_board *thisboard = comedi_board(dev);
struct dio200_private *devpriv = dev->private;
- const struct dio200_layout_struct *layout =
- &dio200_layouts[thisboard->layout];
+ const struct dio200_layout *layout = dio200_board_layout(thisboard);
struct comedi_subdevice *s;
int sdx;
unsigned int n;
int ret;
devpriv->intr_sd = -1;
- dev->iobase = iobase;
dev->board_name = thisboard->name;
ret = comedi_alloc_subdevices(dev, layout->n_subdevs);
@@ -1257,16 +1819,15 @@
switch (layout->sdtype[n]) {
case sd_8254:
/* counter subdevice (8254) */
- ret = dio200_subdev_8254_init(dev, s, iobase,
- layout->sdinfo[n],
- layout->has_clk_gat_sce);
+ ret = dio200_subdev_8254_init(dev, s,
+ layout->sdinfo[n]);
if (ret < 0)
return ret;
break;
case sd_8255:
/* digital i/o subdevice (8255) */
- ret = subdev_8255_init(dev, s, NULL,
- iobase + layout->sdinfo[n]);
+ ret = dio200_subdev_8255_init(dev, s,
+ layout->sdinfo[n]);
if (ret < 0)
return ret;
break;
@@ -1274,11 +1835,9 @@
/* 'INTERRUPT' subdevice */
if (irq) {
ret = dio200_subdev_intr_init(dev, s,
- iobase +
DIO200_INT_SCE,
- layout->sdinfo[n],
- layout->
- has_int_sce);
+ layout->sdinfo[n]
+ );
if (ret < 0)
return ret;
devpriv->intr_sd = n;
@@ -1286,6 +1845,16 @@
s->type = COMEDI_SUBD_UNUSED;
}
break;
+ case sd_timer:
+ /* Only on PCIe boards. */
+ if (DO_PCI) {
+ ret = dio200_subdev_timer_init(dev, s);
+ if (ret < 0)
+ return ret;
+ } else {
+ s->type = COMEDI_SUBD_UNUSED;
+ }
+ break;
default:
s->type = COMEDI_SUBD_UNUSED;
break;
@@ -1307,24 +1876,6 @@
return 1;
}
-static int dio200_pci_common_attach(struct comedi_device *dev,
- struct pci_dev *pci_dev)
-{
- unsigned long iobase;
- int ret;
-
- comedi_set_hw_dev(dev, &pci_dev->dev);
-
- ret = comedi_pci_enable(pci_dev, DIO200_DRIVER_NAME);
- if (ret < 0) {
- dev_err(dev->class_dev,
- "error! cannot enable PCI device and request regions!\n");
- return ret;
- }
- iobase = pci_resource_start(pci_dev, 2);
- return dio200_common_attach(dev, iobase, pci_dev->irq, IRQF_SHARED);
-}
-
/*
* Attach is called by the Comedi core to configure the driver
* for a particular board. If you specified a board_name array
@@ -1334,15 +1885,15 @@
static int dio200_attach(struct comedi_device *dev, struct comedi_devconfig *it)
{
const struct dio200_board *thisboard = comedi_board(dev);
+ struct dio200_private *devpriv;
int ret;
dev_info(dev->class_dev, DIO200_DRIVER_NAME ": attach\n");
- ret = alloc_private(dev, sizeof(struct dio200_private));
- if (ret < 0) {
- dev_err(dev->class_dev, "error! out of memory!\n");
- return ret;
- }
+ devpriv = kzalloc(sizeof(*devpriv), GFP_KERNEL);
+ if (!devpriv)
+ return -ENOMEM;
+ dev->private = devpriv;
/* Process options and reserve resources according to bus type. */
if (is_isa_board(thisboard)) {
@@ -1351,17 +1902,17 @@
iobase = it->options[0];
irq = it->options[1];
- ret = dio200_request_region(dev, iobase, DIO200_IO_SIZE);
+ ret = dio200_request_region(dev, iobase, thisboard->mainsize);
if (ret < 0)
return ret;
- return dio200_common_attach(dev, iobase, irq, 0);
+ devpriv->io.u.iobase = iobase;
+ devpriv->io.regtype = io_regtype;
+ return dio200_common_attach(dev, irq, 0);
} else if (is_pci_board(thisboard)) {
- struct pci_dev *pci_dev;
-
- pci_dev = dio200_find_pci_dev(dev, it);
- if (!pci_dev)
- return -EIO;
- return dio200_pci_common_attach(dev, pci_dev);
+ dev_err(dev->class_dev,
+ "Manual configuration of PCI board '%s' is not supported\n",
+ thisboard->name);
+ return -EIO;
} else {
dev_err(dev->class_dev, DIO200_DRIVER_NAME
": BUG! cannot determine board type!\n");
@@ -1370,13 +1921,18 @@
}
/*
- * The attach_pci hook (if non-NULL) is called at PCI probe time in preference
- * to the "manual" attach hook. dev->board_ptr is NULL on entry. There should
- * be a board entry matching the supplied PCI device.
+ * The auto_attach hook is called at PCI probe time via
+ * comedi_pci_auto_config(). dev->board_ptr is NULL on entry.
+ * There should be a board entry matching the supplied PCI device.
*/
-static int __devinit dio200_attach_pci(struct comedi_device *dev,
- struct pci_dev *pci_dev)
+static int dio200_auto_attach(struct comedi_device *dev,
+ unsigned long context_unused)
{
+ struct pci_dev *pci_dev = comedi_to_pci_dev(dev);
+ const struct dio200_board *thisboard;
+ struct dio200_private *devpriv;
+ resource_size_t base, len;
+ unsigned int bar;
int ret;
if (!DO_PCI)
@@ -1384,38 +1940,71 @@
dev_info(dev->class_dev, DIO200_DRIVER_NAME ": attach pci %s\n",
pci_name(pci_dev));
- ret = alloc_private(dev, sizeof(struct dio200_private));
- if (ret < 0) {
- dev_err(dev->class_dev, "error! out of memory!\n");
- return ret;
- }
+
+ devpriv = kzalloc(sizeof(*devpriv), GFP_KERNEL);
+ if (!devpriv)
+ return -ENOMEM;
+ dev->private = devpriv;
+
dev->board_ptr = dio200_find_pci_board(pci_dev);
if (dev->board_ptr == NULL) {
dev_err(dev->class_dev, "BUG! cannot determine board type!\n");
return -EINVAL;
}
- /*
- * Need to 'get' the PCI device to match the 'put' in dio200_detach().
- * TODO: Remove the pci_dev_get() and matching pci_dev_put() once
- * support for manual attachment of PCI devices via dio200_attach()
- * has been removed.
- */
- pci_dev_get(pci_dev);
- return dio200_pci_common_attach(dev, pci_dev);
+ thisboard = comedi_board(dev);
+ ret = comedi_pci_enable(pci_dev, DIO200_DRIVER_NAME);
+ if (ret < 0) {
+ dev_err(dev->class_dev,
+ "error! cannot enable PCI device and request regions!\n");
+ return ret;
+ }
+ bar = thisboard->mainbar;
+ base = pci_resource_start(pci_dev, bar);
+ len = pci_resource_len(pci_dev, bar);
+ if (len < thisboard->mainsize) {
+ dev_err(dev->class_dev, "error! PCI region size too small!\n");
+ return -EINVAL;
+ }
+ if ((pci_resource_flags(pci_dev, bar) & IORESOURCE_MEM) != 0) {
+ devpriv->io.u.membase = ioremap_nocache(base, len);
+ if (!devpriv->io.u.membase) {
+ dev_err(dev->class_dev,
+ "error! cannot remap registers\n");
+ return -ENOMEM;
+ }
+ devpriv->io.regtype = mmio_regtype;
+ } else {
+ devpriv->io.u.iobase = (unsigned long)base;
+ devpriv->io.regtype = io_regtype;
+ }
+ switch (thisboard->model)
+ {
+ case pcie215_model:
+ case pcie236_model:
+ case pcie296_model:
+ ret = dio200_pcie_board_setup(dev);
+ if (ret < 0)
+ return ret;
+ break;
+ default:
+ break;
+ }
+ return dio200_common_attach(dev, pci_dev->irq, IRQF_SHARED);
}
static void dio200_detach(struct comedi_device *dev)
{
const struct dio200_board *thisboard = comedi_board(dev);
- const struct dio200_layout_struct *layout;
+ struct dio200_private *devpriv = dev->private;
+ const struct dio200_layout *layout;
unsigned n;
- if (!thisboard)
+ if (!thisboard || !devpriv)
return;
if (dev->irq)
free_irq(dev->irq, dev);
if (dev->subdevices) {
- layout = &dio200_layouts[thisboard->layout];
+ layout = dio200_board_layout(thisboard);
for (n = 0; n < dev->n_subdevices; n++) {
struct comedi_subdevice *s = &dev->subdevices[n];
switch (layout->sdtype[n]) {
@@ -1423,25 +2012,33 @@
dio200_subdev_8254_cleanup(dev, s);
break;
case sd_8255:
- subdev_8255_cleanup(dev, s);
+ dio200_subdev_8255_cleanup(dev, s);
break;
case sd_intr:
dio200_subdev_intr_cleanup(dev, s);
break;
+ case sd_timer:
+ /* Only on PCIe boards. */
+ if (DO_PCI)
+ dio200_subdev_timer_cleanup(dev, s);
+ break;
default:
break;
}
}
}
if (is_isa_board(thisboard)) {
- if (dev->iobase)
- release_region(dev->iobase, DIO200_IO_SIZE);
+ if (devpriv->io.regtype == io_regtype)
+ release_region(devpriv->io.u.iobase,
+ thisboard->mainsize);
} else if (is_pci_board(thisboard)) {
struct pci_dev *pcidev = comedi_to_pci_dev(dev);
if (pcidev) {
- if (dev->iobase)
+ if (devpriv->io.regtype != no_regtype) {
+ if (devpriv->io.regtype == mmio_regtype)
+ iounmap(devpriv->io.u.membase);
comedi_pci_disable(pcidev);
- pci_dev_put(pcidev);
+ }
}
}
}
@@ -1456,7 +2053,7 @@
.driver_name = DIO200_DRIVER_NAME,
.module = THIS_MODULE,
.attach = dio200_attach,
- .attach_pci = dio200_attach_pci,
+ .auto_attach = dio200_auto_attach,
.detach = dio200_detach,
.board_name = &dio200_boards[0].name,
.offset = sizeof(struct dio200_board),
@@ -1467,19 +2064,22 @@
static DEFINE_PCI_DEVICE_TABLE(dio200_pci_table) = {
{ PCI_DEVICE(PCI_VENDOR_ID_AMPLICON, PCI_DEVICE_ID_AMPLICON_PCI215) },
{ PCI_DEVICE(PCI_VENDOR_ID_AMPLICON, PCI_DEVICE_ID_AMPLICON_PCI272) },
+ { PCI_DEVICE(PCI_VENDOR_ID_AMPLICON, PCI_DEVICE_ID_AMPLICON_PCIE236) },
+ { PCI_DEVICE(PCI_VENDOR_ID_AMPLICON, PCI_DEVICE_ID_AMPLICON_PCIE215) },
+ { PCI_DEVICE(PCI_VENDOR_ID_AMPLICON, PCI_DEVICE_ID_AMPLICON_PCIE296) },
{0}
};
MODULE_DEVICE_TABLE(pci, dio200_pci_table);
-static int __devinit amplc_dio200_pci_probe(struct pci_dev *dev,
+static int amplc_dio200_pci_probe(struct pci_dev *dev,
const struct pci_device_id
*ent)
{
return comedi_pci_auto_config(dev, &lc_dio200_driver);
}
-static void __devexit amplc_dio200_pci_remove(struct pci_dev *dev)
+static void amplc_dio200_pci_remove(struct pci_dev *dev)
{
comedi_pci_auto_unconfig(dev);
}
@@ -1488,7 +2088,7 @@
.name = DIO200_DRIVER_NAME,
.id_table = dio200_pci_table,
.probe = &lc_dio200_pci_probe,
- .remove = __devexit_p(&lc_dio200_pci_remove)
+ .remove = &lc_dio200_pci_remove
};
module_comedi_pci_driver(amplc_dio200_driver, amplc_dio200_pci_driver);
#else
diff --git a/drivers/staging/comedi/drivers/amplc_pc236.c b/drivers/staging/comedi/drivers/amplc_pc236.c
index 4e4f3c1..2898354 100644
--- a/drivers/staging/comedi/drivers/amplc_pc236.c
+++ b/drivers/staging/comedi/drivers/amplc_pc236.c
@@ -66,7 +66,6 @@
#define DO_PCI IS_ENABLED(CONFIG_COMEDI_AMPLC_PC236_PCI)
/* PCI236 PCI configuration register information */
-#define PCI_VENDOR_ID_AMPLICON 0x14dc
#define PCI_DEVICE_ID_AMPLICON_PCI236 0x0009
#define PCI_DEVICE_ID_INVALID 0xffff
@@ -332,28 +331,13 @@
if (err)
return 2;
- /* step 3: */
+ /* Step 3: check it arguments are trivially valid */
- if (cmd->start_arg != 0) {
- cmd->start_arg = 0;
- err++;
- }
- if (cmd->scan_begin_arg != 0) {
- cmd->scan_begin_arg = 0;
- err++;
- }
- if (cmd->convert_arg != 0) {
- cmd->convert_arg = 0;
- err++;
- }
- if (cmd->scan_end_arg != 1) {
- cmd->scan_end_arg = 1;
- err++;
- }
- if (cmd->stop_arg != 0) {
- cmd->stop_arg = 0;
- err++;
- }
+ err |= cfc_check_trigger_arg_is(&cmd->start_arg, 0);
+ err |= cfc_check_trigger_arg_is(&cmd->scan_begin_arg, 0);
+ err |= cfc_check_trigger_arg_is(&cmd->convert_arg, 0);
+ err |= cfc_check_trigger_arg_is(&cmd->scan_end_arg, 1);
+ err |= cfc_check_trigger_arg_is(&cmd->stop_arg, 0);
if (err)
return 3;
@@ -505,14 +489,16 @@
static int pc236_attach(struct comedi_device *dev, struct comedi_devconfig *it)
{
const struct pc236_board *thisboard = comedi_board(dev);
+ struct pc236_private *devpriv;
int ret;
dev_info(dev->class_dev, PC236_DRIVER_NAME ": attach\n");
- ret = alloc_private(dev, sizeof(struct pc236_private));
- if (ret < 0) {
- dev_err(dev->class_dev, "error! out of memory!\n");
- return ret;
- }
+
+ devpriv = kzalloc(sizeof(*devpriv), GFP_KERNEL);
+ if (!devpriv)
+ return -ENOMEM;
+ dev->private = devpriv;
+
/* Process options according to bus type. */
if (is_isa_board(thisboard)) {
unsigned long iobase = it->options[0];
@@ -536,25 +522,27 @@
}
/*
- * The attach_pci hook (if non-NULL) is called at PCI probe time in preference
- * to the "manual" attach hook. dev->board_ptr is NULL on entry. There should
- * be a board entry matching the supplied PCI device.
+ * The auto_attach hook is called at PCI probe time via
+ * comedi_pci_auto_config(). dev->board_ptr is NULL on entry.
+ * There should be a board entry matching the supplied PCI device.
*/
-static int __devinit pc236_attach_pci(struct comedi_device *dev,
- struct pci_dev *pci_dev)
+static int pc236_auto_attach(struct comedi_device *dev,
+ unsigned long context_unused)
{
- int ret;
+ struct pci_dev *pci_dev = comedi_to_pci_dev(dev);
+ struct pc236_private *devpriv;
if (!DO_PCI)
return -EINVAL;
dev_info(dev->class_dev, PC236_DRIVER_NAME ": attach pci %s\n",
pci_name(pci_dev));
- ret = alloc_private(dev, sizeof(struct pc236_private));
- if (ret < 0) {
- dev_err(dev->class_dev, "error! out of memory!\n");
- return ret;
- }
+
+ devpriv = kzalloc(sizeof(*devpriv), GFP_KERNEL);
+ if (!devpriv)
+ return -ENOMEM;
+ dev->private = devpriv;
+
dev->board_ptr = pc236_find_pci_board(pci_dev);
if (dev->board_ptr == NULL) {
dev_err(dev->class_dev, "BUG! cannot determine board type!\n");
@@ -605,7 +593,7 @@
.driver_name = PC236_DRIVER_NAME,
.module = THIS_MODULE,
.attach = pc236_attach,
- .attach_pci = pc236_attach_pci,
+ .auto_attach = pc236_auto_attach,
.detach = pc236_detach,
.board_name = &pc236_boards[0].name,
.offset = sizeof(struct pc236_board),
@@ -620,13 +608,13 @@
MODULE_DEVICE_TABLE(pci, pc236_pci_table);
-static int __devinit amplc_pc236_pci_probe(struct pci_dev *dev,
+static int amplc_pc236_pci_probe(struct pci_dev *dev,
const struct pci_device_id *ent)
{
return comedi_pci_auto_config(dev, &lc_pc236_driver);
}
-static void __devexit amplc_pc236_pci_remove(struct pci_dev *dev)
+static void amplc_pc236_pci_remove(struct pci_dev *dev)
{
comedi_pci_auto_unconfig(dev);
}
@@ -635,7 +623,7 @@
.name = PC236_DRIVER_NAME,
.id_table = pc236_pci_table,
.probe = &lc_pc236_pci_probe,
- .remove = __devexit_p(&lc_pc236_pci_remove)
+ .remove = &lc_pc236_pci_remove
};
module_comedi_pci_driver(amplc_pc236_driver, amplc_pc236_pci_driver);
diff --git a/drivers/staging/comedi/drivers/amplc_pc263.c b/drivers/staging/comedi/drivers/amplc_pc263.c
index d0a4c44..dfbff77 100644
--- a/drivers/staging/comedi/drivers/amplc_pc263.c
+++ b/drivers/staging/comedi/drivers/amplc_pc263.c
@@ -52,7 +52,6 @@
#define DO_PCI IS_ENABLED(CONFIG_COMEDI_AMPLC_PC263_PCI)
/* PCI263 PCI configuration register information */
-#define PCI_VENDOR_ID_AMPLICON 0x14dc
#define PCI_DEVICE_ID_AMPLICON_PCI263 0x000c
#define PCI_DEVICE_ID_INVALID 0xffff
@@ -291,17 +290,21 @@
return -EINVAL;
}
}
+
/*
- * The attach_pci hook (if non-NULL) is called at PCI probe time in preference
- * to the "manual" attach hook. dev->board_ptr is NULL on entry. There should
- * be a board entry matching the supplied PCI device.
+ * The auto_attach hook is called at PCI probe time via
+ * comedi_pci_auto_config(). dev->board_ptr is NULL on entry.
+ * There should be a board entry matching the supplied PCI device.
*/
-static int __devinit pc263_attach_pci(struct comedi_device *dev,
- struct pci_dev *pci_dev)
+static int pc263_auto_attach(struct comedi_device *dev,
+ unsigned long context_unused)
{
+ struct pci_dev *pci_dev;
+
if (!DO_PCI)
return -EINVAL;
+ pci_dev = comedi_to_pci_dev(dev);
dev_info(dev->class_dev, PC263_DRIVER_NAME ": attach pci %s\n",
pci_name(pci_dev));
dev->board_ptr = pc263_find_pci_board(pci_dev);
@@ -348,7 +351,7 @@
.driver_name = PC263_DRIVER_NAME,
.module = THIS_MODULE,
.attach = pc263_attach,
- .attach_pci = pc263_attach_pci,
+ .auto_attach = pc263_auto_attach,
.detach = pc263_detach,
.board_name = &pc263_boards[0].name,
.offset = sizeof(struct pc263_board),
@@ -362,14 +365,14 @@
};
MODULE_DEVICE_TABLE(pci, pc263_pci_table);
-static int __devinit amplc_pc263_pci_probe(struct pci_dev *dev,
+static int amplc_pc263_pci_probe(struct pci_dev *dev,
const struct pci_device_id
*ent)
{
return comedi_pci_auto_config(dev, &lc_pc263_driver);
}
-static void __devexit amplc_pc263_pci_remove(struct pci_dev *dev)
+static void amplc_pc263_pci_remove(struct pci_dev *dev)
{
comedi_pci_auto_unconfig(dev);
}
@@ -378,7 +381,7 @@
.name = PC263_DRIVER_NAME,
.id_table = pc263_pci_table,
.probe = &lc_pc263_pci_probe,
- .remove = __devexit_p(&lc_pc263_pci_remove)
+ .remove = &lc_pc263_pci_remove
};
module_comedi_pci_driver(amplc_pc263_driver, amplc_pc263_pci_driver);
#else
diff --git a/drivers/staging/comedi/drivers/amplc_pci224.c b/drivers/staging/comedi/drivers/amplc_pci224.c
index 1f65ec4..6e2566a 100644
--- a/drivers/staging/comedi/drivers/amplc_pci224.c
+++ b/drivers/staging/comedi/drivers/amplc_pci224.c
@@ -116,7 +116,6 @@
/*
* PCI IDs.
*/
-#define PCI_VENDOR_ID_AMPLICON 0x14dc
#define PCI_DEVICE_ID_AMPLICON_PCI224 0x0007
#define PCI_DEVICE_ID_AMPLICON_PCI234 0x0008
#define PCI_DEVICE_ID_INVALID 0xffff
@@ -758,76 +757,58 @@
if (err)
return 2;
- /* Step 3: make sure arguments are trivially compatible. */
+ /* Step 3: check if arguments are trivially valid */
switch (cmd->start_src) {
case TRIG_INT:
- if (cmd->start_arg != 0) {
- cmd->start_arg = 0;
- err++;
- }
+ err |= cfc_check_trigger_arg_is(&cmd->start_arg, 0);
break;
case TRIG_EXT:
/* Force to external trigger 0. */
if ((cmd->start_arg & ~CR_FLAGS_MASK) != 0) {
cmd->start_arg = COMBINE(cmd->start_arg, 0,
~CR_FLAGS_MASK);
- err++;
+ err |= -EINVAL;
}
/* The only flag allowed is CR_EDGE, which is ignored. */
if ((cmd->start_arg & CR_FLAGS_MASK & ~CR_EDGE) != 0) {
cmd->start_arg = COMBINE(cmd->start_arg, 0,
CR_FLAGS_MASK & ~CR_EDGE);
- err++;
+ err |= -EINVAL;
}
break;
}
switch (cmd->scan_begin_src) {
case TRIG_TIMER:
- if (cmd->scan_begin_arg > MAX_SCAN_PERIOD) {
- cmd->scan_begin_arg = MAX_SCAN_PERIOD;
- err++;
- }
+ err |= cfc_check_trigger_arg_max(&cmd->scan_begin_arg,
+ MAX_SCAN_PERIOD);
+
tmp = cmd->chanlist_len * CONVERT_PERIOD;
if (tmp < MIN_SCAN_PERIOD)
tmp = MIN_SCAN_PERIOD;
-
- if (cmd->scan_begin_arg < tmp) {
- cmd->scan_begin_arg = tmp;
- err++;
- }
+ err |= cfc_check_trigger_arg_min(&cmd->scan_begin_arg, tmp);
break;
case TRIG_EXT:
/* Force to external trigger 0. */
if ((cmd->scan_begin_arg & ~CR_FLAGS_MASK) != 0) {
cmd->scan_begin_arg = COMBINE(cmd->scan_begin_arg, 0,
~CR_FLAGS_MASK);
- err++;
+ err |= -EINVAL;
}
/* Only allow flags CR_EDGE and CR_INVERT. Ignore CR_EDGE. */
if ((cmd->scan_begin_arg & CR_FLAGS_MASK &
~(CR_EDGE | CR_INVERT)) != 0) {
cmd->scan_begin_arg = COMBINE(cmd->scan_begin_arg, 0,
- CR_FLAGS_MASK & ~(CR_EDGE
- |
- CR_INVERT));
- err++;
+ CR_FLAGS_MASK &
+ ~(CR_EDGE | CR_INVERT));
+ err |= -EINVAL;
}
break;
}
- /* cmd->convert_src == TRIG_NOW */
- if (cmd->convert_arg != 0) {
- cmd->convert_arg = 0;
- err++;
- }
-
- /* cmd->scan_end_arg == TRIG_COUNT */
- if (cmd->scan_end_arg != cmd->chanlist_len) {
- cmd->scan_end_arg = cmd->chanlist_len;
- err++;
- }
+ err |= cfc_check_trigger_arg_is(&cmd->convert_arg, 0);
+ err |= cfc_check_trigger_arg_is(&cmd->scan_end_arg, cmd->chanlist_len);
switch (cmd->stop_src) {
case TRIG_COUNT:
@@ -838,7 +819,7 @@
if ((cmd->stop_arg & ~CR_FLAGS_MASK) != 0) {
cmd->stop_arg = COMBINE(cmd->stop_arg, 0,
~CR_FLAGS_MASK);
- err++;
+ err |= -EINVAL;
}
/* The only flag allowed is CR_EDGE, which is ignored. */
if ((cmd->stop_arg & CR_FLAGS_MASK & ~CR_EDGE) != 0) {
@@ -847,10 +828,7 @@
}
break;
case TRIG_NONE:
- if (cmd->stop_arg != 0) {
- cmd->stop_arg = 0;
- err++;
- }
+ err |= cfc_check_trigger_arg_is(&cmd->stop_arg, 0);
break;
}
@@ -1287,7 +1265,7 @@
}
/*
- * Common part of attach and attach_pci.
+ * Common part of attach and auto_attach.
*/
static int pci224_attach_common(struct comedi_device *dev,
struct pci_dev *pci_dev, int *options)
@@ -1443,16 +1421,15 @@
static int pci224_attach(struct comedi_device *dev, struct comedi_devconfig *it)
{
+ struct pci224_private *devpriv;
struct pci_dev *pci_dev;
- int ret;
dev_info(dev->class_dev, DRIVER_NAME ": attach\n");
- ret = alloc_private(dev, sizeof(struct pci224_private));
- if (ret < 0) {
- dev_err(dev->class_dev, "error! out of memory!\n");
- return ret;
- }
+ devpriv = kzalloc(sizeof(*devpriv), GFP_KERNEL);
+ if (!devpriv)
+ return -ENOMEM;
+ dev->private = devpriv;
pci_dev = pci224_find_pci_dev(dev, it);
if (!pci_dev)
@@ -1461,19 +1438,19 @@
return pci224_attach_common(dev, pci_dev, it->options);
}
-static int __devinit
-pci224_attach_pci(struct comedi_device *dev, struct pci_dev *pci_dev)
+static int
+pci224_auto_attach(struct comedi_device *dev, unsigned long context_unused)
{
- int ret;
+ struct pci_dev *pci_dev = comedi_to_pci_dev(dev);
+ struct pci224_private *devpriv;
- dev_info(dev->class_dev, DRIVER_NAME ": attach_pci %s\n",
+ dev_info(dev->class_dev, DRIVER_NAME ": attach pci %s\n",
pci_name(pci_dev));
- ret = alloc_private(dev, sizeof(struct pci224_private));
- if (ret < 0) {
- dev_err(dev->class_dev, "error! out of memory!\n");
- return ret;
- }
+ devpriv = kzalloc(sizeof(*devpriv), GFP_KERNEL);
+ if (!devpriv)
+ return -ENOMEM;
+ dev->private = devpriv;
dev->board_ptr = pci224_find_pci_board(pci_dev);
if (dev->board_ptr == NULL) {
@@ -1522,20 +1499,20 @@
.module = THIS_MODULE,
.attach = pci224_attach,
.detach = pci224_detach,
- .attach_pci = pci224_attach_pci,
+ .auto_attach = pci224_auto_attach,
.board_name = &pci224_boards[0].name,
.offset = sizeof(struct pci224_board),
.num_names = ARRAY_SIZE(pci224_boards),
};
-static int __devinit amplc_pci224_pci_probe(struct pci_dev *dev,
+static int amplc_pci224_pci_probe(struct pci_dev *dev,
const struct pci_device_id
*ent)
{
return comedi_pci_auto_config(dev, &lc_pci224_driver);
}
-static void __devexit amplc_pci224_pci_remove(struct pci_dev *dev)
+static void amplc_pci224_pci_remove(struct pci_dev *dev)
{
comedi_pci_auto_unconfig(dev);
}
@@ -1551,7 +1528,7 @@
.name = "amplc_pci224",
.id_table = amplc_pci224_pci_table,
.probe = amplc_pci224_pci_probe,
- .remove = __devexit_p(amplc_pci224_pci_remove),
+ .remove = amplc_pci224_pci_remove,
};
module_comedi_pci_driver(amplc_pci224_driver, amplc_pci224_pci_driver);
diff --git a/drivers/staging/comedi/drivers/amplc_pci230.c b/drivers/staging/comedi/drivers/amplc_pci230.c
index bd8fb87..366c68b 100644
--- a/drivers/staging/comedi/drivers/amplc_pci230.c
+++ b/drivers/staging/comedi/drivers/amplc_pci230.c
@@ -198,7 +198,6 @@
#include "8255.h"
/* PCI230 PCI configuration register information */
-#define PCI_VENDOR_ID_AMPLICON 0x14dc
#define PCI_DEVICE_ID_PCI230 0x0000
#define PCI_DEVICE_ID_PCI260 0x0006
#define PCI_DEVICE_ID_INVALID 0xffff
@@ -1000,14 +999,10 @@
if (err)
return 2;
- /* Step 3: make sure arguments are trivially compatible.
- * "invalid argument" returned by comedilib to user mode process
- * if this fails. */
+ /* Step 3: check if arguments are trivially valid */
- if (cmd->start_arg != 0) {
- cmd->start_arg = 0;
- err++;
- }
+ err |= cfc_check_trigger_arg_is(&cmd->start_arg, 0);
+
#define MAX_SPEED_AO 8000 /* 8000 ns => 125 kHz */
#define MIN_SPEED_AO 4294967295u /* 4294967295ns = 4.29s */
/*- Comedi limit due to unsigned int cmd. Driver limit
@@ -1016,14 +1011,10 @@
switch (cmd->scan_begin_src) {
case TRIG_TIMER:
- if (cmd->scan_begin_arg < MAX_SPEED_AO) {
- cmd->scan_begin_arg = MAX_SPEED_AO;
- err++;
- }
- if (cmd->scan_begin_arg > MIN_SPEED_AO) {
- cmd->scan_begin_arg = MIN_SPEED_AO;
- err++;
- }
+ err |= cfc_check_trigger_arg_min(&cmd->scan_begin_arg,
+ MAX_SPEED_AO);
+ err |= cfc_check_trigger_arg_max(&cmd->scan_begin_arg,
+ MIN_SPEED_AO);
break;
case TRIG_EXT:
/* External trigger - for PCI230+ hardware version 2 onwards. */
@@ -1031,37 +1022,27 @@
if ((cmd->scan_begin_arg & ~CR_FLAGS_MASK) != 0) {
cmd->scan_begin_arg = COMBINE(cmd->scan_begin_arg, 0,
~CR_FLAGS_MASK);
- err++;
+ err |= -EINVAL;
}
/* The only flags allowed are CR_EDGE and CR_INVERT. The
* CR_EDGE flag is ignored. */
if ((cmd->scan_begin_arg
& (CR_FLAGS_MASK & ~(CR_EDGE | CR_INVERT))) != 0) {
- cmd->scan_begin_arg =
- COMBINE(cmd->scan_begin_arg, 0,
- CR_FLAGS_MASK & ~(CR_EDGE | CR_INVERT));
- err++;
+ cmd->scan_begin_arg = COMBINE(cmd->scan_begin_arg, 0,
+ CR_FLAGS_MASK &
+ ~(CR_EDGE | CR_INVERT));
+ err |= -EINVAL;
}
break;
default:
- if (cmd->scan_begin_arg != 0) {
- cmd->scan_begin_arg = 0;
- err++;
- }
+ err |= cfc_check_trigger_arg_is(&cmd->scan_begin_arg, 0);
break;
}
- if (cmd->scan_end_arg != cmd->chanlist_len) {
- cmd->scan_end_arg = cmd->chanlist_len;
- err++;
- }
- if (cmd->stop_src == TRIG_NONE) {
- /* TRIG_NONE */
- if (cmd->stop_arg != 0) {
- cmd->stop_arg = 0;
- err++;
- }
- }
+ err |= cfc_check_trigger_arg_is(&cmd->scan_end_arg, cmd->chanlist_len);
+
+ if (cmd->stop_src == TRIG_NONE)
+ err |= cfc_check_trigger_arg_is(&cmd->stop_arg, 0);
if (err)
return 3;
@@ -1619,14 +1600,10 @@
if (err)
return 2;
- /* Step 3: make sure arguments are trivially compatible.
- * "invalid argument" returned by comedilib to user mode process
- * if this fails. */
+ /* Step 3: check if arguments are trivially valid */
- if (cmd->start_arg != 0) {
- cmd->start_arg = 0;
- err++;
- }
+ err |= cfc_check_trigger_arg_is(&cmd->start_arg, 0);
+
#define MAX_SPEED_AI_SE 3200 /* PCI230 SE: 3200 ns => 312.5 kHz */
#define MAX_SPEED_AI_DIFF 8000 /* PCI230 DIFF: 8000 ns => 125 kHz */
#define MAX_SPEED_AI_PLUS 4000 /* PCI230+: 4000 ns => 250 kHz */
@@ -1657,14 +1634,10 @@
max_speed_ai = MAX_SPEED_AI_PLUS;
}
- if (cmd->convert_arg < max_speed_ai) {
- cmd->convert_arg = max_speed_ai;
- err++;
- }
- if (cmd->convert_arg > MIN_SPEED_AI) {
- cmd->convert_arg = MIN_SPEED_AI;
- err++;
- }
+ err |= cfc_check_trigger_arg_min(&cmd->convert_arg,
+ max_speed_ai);
+ err |= cfc_check_trigger_arg_max(&cmd->convert_arg,
+ MIN_SPEED_AI);
} else if (cmd->convert_src == TRIG_EXT) {
/*
* external trigger
@@ -1679,46 +1652,33 @@
if ((cmd->convert_arg & ~CR_FLAGS_MASK) != 0) {
cmd->convert_arg = COMBINE(cmd->convert_arg, 0,
~CR_FLAGS_MASK);
- err++;
+ err |= -EINVAL;
}
/* The only flags allowed are CR_INVERT and CR_EDGE.
* CR_EDGE is required. */
if ((cmd->convert_arg & (CR_FLAGS_MASK & ~CR_INVERT))
!= CR_EDGE) {
/* Set CR_EDGE, preserve CR_INVERT. */
- cmd->convert_arg =
- COMBINE(cmd->start_arg, (CR_EDGE | 0),
- CR_FLAGS_MASK & ~CR_INVERT);
- err++;
+ cmd->convert_arg = COMBINE(cmd->start_arg,
+ (CR_EDGE | 0),
+ CR_FLAGS_MASK &
+ ~CR_INVERT);
+ err |= -EINVAL;
}
} else {
/* Backwards compatibility with previous versions. */
/* convert_arg == 0 => trigger on -ve edge. */
/* convert_arg == 1 => trigger on +ve edge. */
- if (cmd->convert_arg > 1) {
- /* Default to trigger on +ve edge. */
- cmd->convert_arg = 1;
- err++;
- }
+ err |= cfc_check_trigger_arg_max(&cmd->convert_arg, 1);
}
} else {
- if (cmd->convert_arg != 0) {
- cmd->convert_arg = 0;
- err++;
- }
+ err |= cfc_check_trigger_arg_is(&cmd->convert_arg, 0);
}
- if (cmd->scan_end_arg != cmd->chanlist_len) {
- cmd->scan_end_arg = cmd->chanlist_len;
- err++;
- }
+ err |= cfc_check_trigger_arg_is(&cmd->scan_end_arg, cmd->chanlist_len);
- if (cmd->stop_src == TRIG_NONE) {
- if (cmd->stop_arg != 0) {
- cmd->stop_arg = 0;
- err++;
- }
- }
+ if (cmd->stop_src == TRIG_NONE)
+ err |= cfc_check_trigger_arg_is(&cmd->stop_arg, 0);
if (cmd->scan_begin_src == TRIG_EXT) {
/* external "trigger" to begin each scan
@@ -1727,24 +1687,21 @@
if ((cmd->scan_begin_arg & ~CR_FLAGS_MASK) != 0) {
cmd->scan_begin_arg = COMBINE(cmd->scan_begin_arg, 0,
~CR_FLAGS_MASK);
- err++;
+ err |= -EINVAL;
}
/* The only flag allowed is CR_EDGE, which is ignored. */
if ((cmd->scan_begin_arg & CR_FLAGS_MASK & ~CR_EDGE) != 0) {
cmd->scan_begin_arg = COMBINE(cmd->scan_begin_arg, 0,
CR_FLAGS_MASK & ~CR_EDGE);
- err++;
+ err |= -EINVAL;
}
} else if (cmd->scan_begin_src == TRIG_TIMER) {
/* N.B. cmd->convert_arg is also TRIG_TIMER */
if (!pci230_ai_check_scan_period(cmd))
- err++;
+ err |= -EINVAL;
} else {
- if (cmd->scan_begin_arg != 0) {
- cmd->scan_begin_arg = 0;
- err++;
- }
+ err |= cfc_check_trigger_arg_is(&cmd->scan_begin_arg, 0);
}
if (err)
@@ -2660,15 +2617,12 @@
static int pci230_alloc_private(struct comedi_device *dev)
{
struct pci230_private *devpriv;
- int err;
- /* sets dev->private to allocated memory */
- err = alloc_private(dev, sizeof(struct pci230_private));
- if (err) {
- dev_err(dev->class_dev, "error! out of memory!\n");
- return err;
- }
- devpriv = dev->private;
+ devpriv = kzalloc(sizeof(*devpriv), GFP_KERNEL);
+ if (!devpriv)
+ return -ENOMEM;
+ dev->private = devpriv;
+
spin_lock_init(&devpriv->isr_spinlock);
spin_lock_init(&devpriv->res_spinlock);
spin_lock_init(&devpriv->ai_stop_spinlock);
@@ -2676,7 +2630,7 @@
return 0;
}
-/* Common part of attach and attach_pci. */
+/* Common part of attach and auto_attach. */
static int pci230_attach_common(struct comedi_device *dev,
struct pci_dev *pci_dev)
{
@@ -2836,25 +2790,30 @@
dev_info(dev->class_dev, "amplc_pci230: attach %s %d,%d\n",
thisboard->name, it->options[0], it->options[1]);
- rc = pci230_alloc_private(dev); /* sets dev->private */
+
+ rc = pci230_alloc_private(dev);
if (rc)
return rc;
+
pci_dev = pci230_find_pci_dev(dev, it);
if (!pci_dev)
return -EIO;
return pci230_attach_common(dev, pci_dev);
}
-static int __devinit pci230_attach_pci(struct comedi_device *dev,
- struct pci_dev *pci_dev)
+static int pci230_auto_attach(struct comedi_device *dev,
+ unsigned long context_unused)
{
+ struct pci_dev *pci_dev = comedi_to_pci_dev(dev);
int rc;
dev_info(dev->class_dev, "amplc_pci230: attach pci %s\n",
pci_name(pci_dev));
- rc = pci230_alloc_private(dev); /* sets dev->private */
+
+ rc = pci230_alloc_private(dev);
if (rc)
return rc;
+
dev->board_ptr = pci230_find_pci_board(pci_dev);
if (dev->board_ptr == NULL) {
dev_err(dev->class_dev,
@@ -2891,20 +2850,20 @@
.driver_name = "amplc_pci230",
.module = THIS_MODULE,
.attach = pci230_attach,
- .attach_pci = pci230_attach_pci,
+ .auto_attach = pci230_auto_attach,
.detach = pci230_detach,
.board_name = &pci230_boards[0].name,
.offset = sizeof(pci230_boards[0]),
.num_names = ARRAY_SIZE(pci230_boards),
};
-static int __devinit amplc_pci230_pci_probe(struct pci_dev *dev,
+static int amplc_pci230_pci_probe(struct pci_dev *dev,
const struct pci_device_id *ent)
{
return comedi_pci_auto_config(dev, &lc_pci230_driver);
}
-static void __devexit amplc_pci230_pci_remove(struct pci_dev *dev)
+static void amplc_pci230_pci_remove(struct pci_dev *dev)
{
comedi_pci_auto_unconfig(dev);
}
@@ -2920,7 +2879,7 @@
.name = "amplc_pci230",
.id_table = amplc_pci230_pci_table,
.probe = amplc_pci230_pci_probe,
- .remove = __devexit_p(amplc_pci230_pci_remove)
+ .remove = amplc_pci230_pci_remove
};
module_comedi_pci_driver(amplc_pci230_driver, amplc_pci230_pci_driver);
diff --git a/drivers/staging/comedi/drivers/cb_das16_cs.c b/drivers/staging/comedi/drivers/cb_das16_cs.c
index 6d81d8b..93731de 100644
--- a/drivers/staging/comedi/drivers/cb_das16_cs.c
+++ b/drivers/staging/comedi/drivers/cb_das16_cs.c
@@ -194,67 +194,41 @@
if (err)
return 2;
- /* step 3: make sure arguments are trivially compatible */
+ /* Step 3: check if arguments are trivially valid */
- if (cmd->start_arg != 0) {
- cmd->start_arg = 0;
- err++;
- }
+ err |= cfc_check_trigger_arg_is(&cmd->start_arg, 0);
+
#define MAX_SPEED 10000 /* in nanoseconds */
#define MIN_SPEED 1000000000 /* in nanoseconds */
if (cmd->scan_begin_src == TRIG_TIMER) {
- if (cmd->scan_begin_arg < MAX_SPEED) {
- cmd->scan_begin_arg = MAX_SPEED;
- err++;
- }
- if (cmd->scan_begin_arg > MIN_SPEED) {
- cmd->scan_begin_arg = MIN_SPEED;
- err++;
- }
+ err |= cfc_check_trigger_arg_min(&cmd->scan_begin_arg,
+ MAX_SPEED);
+ err |= cfc_check_trigger_arg_max(&cmd->scan_begin_arg,
+ MIN_SPEED);
} else {
/* external trigger */
/* should be level/edge, hi/lo specification here */
/* should specify multiple external triggers */
- if (cmd->scan_begin_arg > 9) {
- cmd->scan_begin_arg = 9;
- err++;
- }
+ err |= cfc_check_trigger_arg_max(&cmd->scan_begin_arg, 9);
}
if (cmd->convert_src == TRIG_TIMER) {
- if (cmd->convert_arg < MAX_SPEED) {
- cmd->convert_arg = MAX_SPEED;
- err++;
- }
- if (cmd->convert_arg > MIN_SPEED) {
- cmd->convert_arg = MIN_SPEED;
- err++;
- }
+ err |= cfc_check_trigger_arg_min(&cmd->convert_arg,
+ MAX_SPEED);
+ err |= cfc_check_trigger_arg_max(&cmd->convert_arg,
+ MIN_SPEED);
} else {
/* external trigger */
/* see above */
- if (cmd->convert_arg > 9) {
- cmd->convert_arg = 9;
- err++;
- }
+ err |= cfc_check_trigger_arg_max(&cmd->convert_arg, 9);
}
- if (cmd->scan_end_arg != cmd->chanlist_len) {
- cmd->scan_end_arg = cmd->chanlist_len;
- err++;
- }
- if (cmd->stop_src == TRIG_COUNT) {
- if (cmd->stop_arg > 0x00ffffff) {
- cmd->stop_arg = 0x00ffffff;
- err++;
- }
- } else {
- /* TRIG_NONE */
- if (cmd->stop_arg != 0) {
- cmd->stop_arg = 0;
- err++;
- }
- }
+ err |= cfc_check_trigger_arg_is(&cmd->scan_end_arg, cmd->chanlist_len);
+
+ if (cmd->stop_src == TRIG_COUNT)
+ err |= cfc_check_trigger_arg_max(&cmd->stop_arg, 0x00ffffff);
+ else /* TRIG_NONE */
+ err |= cfc_check_trigger_arg_is(&cmd->stop_arg, 0);
if (err)
return 3;
@@ -428,6 +402,7 @@
struct comedi_devconfig *it)
{
const struct das16cs_board *thisboard;
+ struct das16cs_private *devpriv;
struct pcmcia_device *link;
struct comedi_subdevice *s;
int ret;
@@ -451,8 +426,10 @@
return ret;
dev->irq = link->irq;
- if (alloc_private(dev, sizeof(struct das16cs_private)) < 0)
+ devpriv = kzalloc(sizeof(*devpriv), GFP_KERNEL);
+ if (!devpriv)
return -ENOMEM;
+ dev->private = devpriv;
ret = comedi_alloc_subdevices(dev, 3);
if (ret)
diff --git a/drivers/staging/comedi/drivers/cb_pcidas.c b/drivers/staging/comedi/drivers/cb_pcidas.c
index de21a26..aed6863 100644
--- a/drivers/staging/comedi/drivers/cb_pcidas.c
+++ b/drivers/staging/comedi/drivers/cb_pcidas.c
@@ -76,9 +76,6 @@
#include "amcc_s5933.h"
#include "comedi_fc.h"
-/* PCI vendor number of ComputerBoards/MeasurementComputing */
-#define PCI_VENDOR_ID_CB 0x1307
-
#define TIMER_BASE 100 /* 10MHz master clock */
#define AI_BUFFER_SIZE 1024 /* max ai fifo size */
#define AO_BUFFER_SIZE 1024 /* max ao fifo size */
@@ -843,49 +840,32 @@
/* External trigger, only CR_EDGE and CR_INVERT flags allowed */
if ((cmd->start_arg
& (CR_FLAGS_MASK & ~(CR_EDGE | CR_INVERT))) != 0) {
- cmd->start_arg &=
- ~(CR_FLAGS_MASK & ~(CR_EDGE | CR_INVERT));
- err++;
+ cmd->start_arg &= ~(CR_FLAGS_MASK &
+ ~(CR_EDGE | CR_INVERT));
+ err |= -EINVAL;
}
if (!thisboard->is_1602 && (cmd->start_arg & CR_INVERT)) {
cmd->start_arg &= (CR_FLAGS_MASK & ~CR_INVERT);
- err++;
+ err |= -EINVAL;
}
break;
default:
- if (cmd->start_arg != 0) {
- cmd->start_arg = 0;
- err++;
- }
+ err |= cfc_check_trigger_arg_is(&cmd->start_arg, 0);
break;
}
- if (cmd->scan_begin_src == TRIG_TIMER) {
- if (cmd->scan_begin_arg <
- thisboard->ai_speed * cmd->chanlist_len) {
- cmd->scan_begin_arg =
- thisboard->ai_speed * cmd->chanlist_len;
- err++;
- }
- }
- if (cmd->convert_src == TRIG_TIMER) {
- if (cmd->convert_arg < thisboard->ai_speed) {
- cmd->convert_arg = thisboard->ai_speed;
- err++;
- }
- }
+ if (cmd->scan_begin_src == TRIG_TIMER)
+ err |= cfc_check_trigger_arg_min(&cmd->scan_begin_arg,
+ thisboard->ai_speed * cmd->chanlist_len);
- if (cmd->scan_end_arg != cmd->chanlist_len) {
- cmd->scan_end_arg = cmd->chanlist_len;
- err++;
- }
- if (cmd->stop_src == TRIG_NONE) {
- /* TRIG_NONE */
- if (cmd->stop_arg != 0) {
- cmd->stop_arg = 0;
- err++;
- }
- }
+ if (cmd->convert_src == TRIG_TIMER)
+ err |= cfc_check_trigger_arg_min(&cmd->convert_arg,
+ thisboard->ai_speed);
+
+ err |= cfc_check_trigger_arg_is(&cmd->scan_end_arg, cmd->chanlist_len);
+
+ if (cmd->stop_src == TRIG_NONE)
+ err |= cfc_check_trigger_arg_is(&cmd->stop_arg, 0);
if (err)
return 3;
@@ -1078,31 +1058,18 @@
if (err)
return 2;
- /* step 3: arguments are trivially compatible */
+ /* Step 3: check if arguments are trivially valid */
- if (cmd->start_arg != 0) {
- cmd->start_arg = 0;
- err++;
- }
+ err |= cfc_check_trigger_arg_is(&cmd->start_arg, 0);
- if (cmd->scan_begin_src == TRIG_TIMER) {
- if (cmd->scan_begin_arg < thisboard->ao_scan_speed) {
- cmd->scan_begin_arg = thisboard->ao_scan_speed;
- err++;
- }
- }
+ if (cmd->scan_begin_src == TRIG_TIMER)
+ err |= cfc_check_trigger_arg_min(&cmd->scan_begin_arg,
+ thisboard->ao_scan_speed);
- if (cmd->scan_end_arg != cmd->chanlist_len) {
- cmd->scan_end_arg = cmd->chanlist_len;
- err++;
- }
- if (cmd->stop_src == TRIG_NONE) {
- /* TRIG_NONE */
- if (cmd->stop_arg != 0) {
- cmd->stop_arg = 0;
- err++;
- }
- }
+ err |= cfc_check_trigger_arg_is(&cmd->scan_end_arg, cmd->chanlist_len);
+
+ if (cmd->stop_src == TRIG_NONE)
+ err |= cfc_check_trigger_arg_is(&cmd->stop_arg, 0);
if (err)
return 3;
@@ -1469,27 +1436,26 @@
return NULL;
}
-static int cb_pcidas_attach_pci(struct comedi_device *dev,
- struct pci_dev *pcidev)
+static int cb_pcidas_auto_attach(struct comedi_device *dev,
+ unsigned long context_unused)
{
+ struct pci_dev *pcidev = comedi_to_pci_dev(dev);
const struct cb_pcidas_board *thisboard;
struct cb_pcidas_private *devpriv;
struct comedi_subdevice *s;
int i;
int ret;
- comedi_set_hw_dev(dev, &pcidev->dev);
-
thisboard = cb_pcidas_find_boardinfo(dev, pcidev);
if (!thisboard)
return -ENODEV;
dev->board_ptr = thisboard;
dev->board_name = thisboard->name;
- ret = alloc_private(dev, sizeof(*devpriv));
- if (ret)
- return ret;
- devpriv = dev->private;
+ devpriv = kzalloc(sizeof(*devpriv), GFP_KERNEL);
+ if (!devpriv)
+ return -ENOMEM;
+ dev->private = devpriv;
ret = comedi_pci_enable(pcidev, dev->board_name);
if (ret)
@@ -1656,17 +1622,17 @@
static struct comedi_driver cb_pcidas_driver = {
.driver_name = "cb_pcidas",
.module = THIS_MODULE,
- .attach_pci = cb_pcidas_attach_pci,
+ .auto_attach = cb_pcidas_auto_attach,
.detach = cb_pcidas_detach,
};
-static int __devinit cb_pcidas_pci_probe(struct pci_dev *dev,
+static int cb_pcidas_pci_probe(struct pci_dev *dev,
const struct pci_device_id *ent)
{
return comedi_pci_auto_config(dev, &cb_pcidas_driver);
}
-static void __devexit cb_pcidas_pci_remove(struct pci_dev *dev)
+static void cb_pcidas_pci_remove(struct pci_dev *dev)
{
comedi_pci_auto_unconfig(dev);
}
@@ -1688,7 +1654,7 @@
.name = "cb_pcidas",
.id_table = cb_pcidas_pci_table,
.probe = cb_pcidas_pci_probe,
- .remove = __devexit_p(cb_pcidas_pci_remove)
+ .remove = cb_pcidas_pci_remove
};
module_comedi_pci_driver(cb_pcidas_driver, cb_pcidas_pci_driver);
diff --git a/drivers/staging/comedi/drivers/cb_pcidas64.c b/drivers/staging/comedi/drivers/cb_pcidas64.c
index 0472a90..d72b46c 100644
--- a/drivers/staging/comedi/drivers/cb_pcidas64.c
+++ b/drivers/staging/comedi/drivers/cb_pcidas64.c
@@ -36,53 +36,57 @@
************************************************************************/
/*
-
-Driver: cb_pcidas64
-Description: MeasurementComputing PCI-DAS64xx, 60XX, and 4020 series with the PLX 9080 PCI controller
-Author: Frank Mori Hess <fmhess@users.sourceforge.net>
-Status: works
-Updated: 2002-10-09
-Devices: [Measurement Computing] PCI-DAS6402/16 (cb_pcidas64),
- PCI-DAS6402/12, PCI-DAS64/M1/16, PCI-DAS64/M2/16,
- PCI-DAS64/M3/16, PCI-DAS6402/16/JR, PCI-DAS64/M1/16/JR,
- PCI-DAS64/M2/16/JR, PCI-DAS64/M3/16/JR, PCI-DAS64/M1/14,
- PCI-DAS64/M2/14, PCI-DAS64/M3/14, PCI-DAS6013, PCI-DAS6014,
- PCI-DAS6023, PCI-DAS6025, PCI-DAS6030,
- PCI-DAS6031, PCI-DAS6032, PCI-DAS6033, PCI-DAS6034,
- PCI-DAS6035, PCI-DAS6036, PCI-DAS6040, PCI-DAS6052,
- PCI-DAS6070, PCI-DAS6071, PCI-DAS4020/12
-
-Configuration options:
- [0] - PCI bus of device (optional)
- [1] - PCI slot of device (optional)
-
-These boards may be autocalibrated with the comedi_calibrate utility.
-
-To select the bnc trigger input on the 4020 (instead of the dio input),
-specify a nonzero channel in the chanspec. If you wish to use an external
-master clock on the 4020, you may do so by setting the scan_begin_src
-to TRIG_OTHER, and using an INSN_CONFIG_TIMER_1 configuration insn
-to configure the divisor to use for the external clock.
-
-Some devices are not identified because the PCI device IDs are not yet
-known. If you have such a board, please file a bug report at
-https://bugs.comedi.org.
-
-*/
+ * Driver: cb_pcidas64
+ * Description: MeasurementComputing PCI-DAS64xx, 60XX, and 4020 series
+ * with the PLX 9080 PCI controller
+ * Author: Frank Mori Hess <fmhess@users.sourceforge.net>
+ * Status: works
+ * Updated: Fri, 02 Nov 2012 18:58:55 +0000
+ * Devices: [Measurement Computing] PCI-DAS6402/16 (cb_pcidas64),
+ * PCI-DAS6402/12, PCI-DAS64/M1/16, PCI-DAS64/M2/16,
+ * PCI-DAS64/M3/16, PCI-DAS6402/16/JR, PCI-DAS64/M1/16/JR,
+ * PCI-DAS64/M2/16/JR, PCI-DAS64/M3/16/JR, PCI-DAS64/M1/14,
+ * PCI-DAS64/M2/14, PCI-DAS64/M3/14, PCI-DAS6013, PCI-DAS6014,
+ * PCI-DAS6023, PCI-DAS6025, PCI-DAS6030,
+ * PCI-DAS6031, PCI-DAS6032, PCI-DAS6033, PCI-DAS6034,
+ * PCI-DAS6035, PCI-DAS6036, PCI-DAS6040, PCI-DAS6052,
+ * PCI-DAS6070, PCI-DAS6071, PCI-DAS4020/12
+ *
+ * Configuration options:
+ * None.
+ *
+ * Manual attachment of PCI cards with the comedi_config utility is not
+ * supported by this driver; they are attached automatically.
+ *
+ * These boards may be autocalibrated with the comedi_calibrate utility.
+ *
+ * To select the bnc trigger input on the 4020 (instead of the dio input),
+ * specify a nonzero channel in the chanspec. If you wish to use an external
+ * master clock on the 4020, you may do so by setting the scan_begin_src
+ * to TRIG_OTHER, and using an INSN_CONFIG_TIMER_1 configuration insn
+ * to configure the divisor to use for the external clock.
+ *
+ * Some devices are not identified because the PCI device IDs are not yet
+ * known. If you have such a board, please let the maintainers know.
+ */
/*
TODO:
make it return error if user attempts an ai command that uses the
- external queue, and an ao command simultaneously
- user counter subdevice
+ external queue, and an ao command simultaneously user counter subdevice
there are a number of boards this driver will support when they are
- fully released, but does not yet since the pci device id numbers
- are not yet available.
- support prescaled 100khz clock for slow pacing (not available on 6000 series?)
+ fully released, but does not yet since the pci device id numbers
+ are not yet available.
+
+ support prescaled 100khz clock for slow pacing (not available on 6000
+ series?)
+
make ao fifo size adjustable like ai fifo
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include "../comedidev.h"
#include <linux/delay.h>
#include <linux/interrupt.h>
@@ -96,17 +100,17 @@
/* #define PCIDAS64_DEBUG enable debugging code */
#ifdef PCIDAS64_DEBUG
-#define DEBUG_PRINT(format, args...) printk(format , ## args)
+#define DEBUG_PRINT(format, args...) pr_debug(format, ## args)
#else
-#define DEBUG_PRINT(format, args...)
+#define DEBUG_PRINT(format, args...) no_printk(format, ## args)
#endif
#define TIMER_BASE 25 /* 40MHz master clock */
-#define PRESCALED_TIMER_BASE 10000 /* 100kHz 'prescaled' clock for slow acquisition, maybe I'll support this someday */
+/* 100kHz 'prescaled' clock for slow acquisition,
+ * maybe I'll support this someday */
+#define PRESCALED_TIMER_BASE 10000
#define DMA_BUFFER_SIZE 0x1000
-#define PCI_VENDOR_ID_COMPUTERBOARDS 0x1307
-
/* maximum value that can be loaded into board's 24-bit counters*/
static const int max_counter_value = 0xffffff;
@@ -119,7 +123,7 @@
DIO_COUNTER_BADDRINDEX = 3,
};
-/* priv(dev)->main_iobase registers */
+/* devpriv->main_iobase registers */
enum write_only_registers {
INTR_ENABLE_REG = 0x0, /* interrupt enable register */
HW_CONFIG_REG = 0x2, /* hardware config register */
@@ -128,26 +132,36 @@
ADC_CONTROL0_REG = 0x10, /* adc control register 0 */
ADC_CONTROL1_REG = 0x12, /* adc control register 1 */
CALIBRATION_REG = 0x14,
- ADC_SAMPLE_INTERVAL_LOWER_REG = 0x16, /* lower 16 bits of adc sample interval counter */
- ADC_SAMPLE_INTERVAL_UPPER_REG = 0x18, /* upper 8 bits of adc sample interval counter */
- ADC_DELAY_INTERVAL_LOWER_REG = 0x1a, /* lower 16 bits of delay interval counter */
- ADC_DELAY_INTERVAL_UPPER_REG = 0x1c, /* upper 8 bits of delay interval counter */
- ADC_COUNT_LOWER_REG = 0x1e, /* lower 16 bits of hardware conversion/scan counter */
- ADC_COUNT_UPPER_REG = 0x20, /* upper 8 bits of hardware conversion/scan counter */
+ /* lower 16 bits of adc sample interval counter */
+ ADC_SAMPLE_INTERVAL_LOWER_REG = 0x16,
+ /* upper 8 bits of adc sample interval counter */
+ ADC_SAMPLE_INTERVAL_UPPER_REG = 0x18,
+ /* lower 16 bits of delay interval counter */
+ ADC_DELAY_INTERVAL_LOWER_REG = 0x1a,
+ /* upper 8 bits of delay interval counter */
+ ADC_DELAY_INTERVAL_UPPER_REG = 0x1c,
+ /* lower 16 bits of hardware conversion/scan counter */
+ ADC_COUNT_LOWER_REG = 0x1e,
+ /* upper 8 bits of hardware conversion/scan counter */
+ ADC_COUNT_UPPER_REG = 0x20,
ADC_START_REG = 0x22, /* software trigger to start acquisition */
ADC_CONVERT_REG = 0x24, /* initiates single conversion */
ADC_QUEUE_CLEAR_REG = 0x26, /* clears adc queue */
ADC_QUEUE_LOAD_REG = 0x28, /* loads adc queue */
ADC_BUFFER_CLEAR_REG = 0x2a,
- ADC_QUEUE_HIGH_REG = 0x2c, /* high channel for internal queue, use adc_chan_bits() inline above */
+ /* high channel for internal queue, use adc_chan_bits() inline above */
+ ADC_QUEUE_HIGH_REG = 0x2c,
DAC_CONTROL0_REG = 0x50, /* dac control register 0 */
DAC_CONTROL1_REG = 0x52, /* dac control register 0 */
- DAC_SAMPLE_INTERVAL_LOWER_REG = 0x54, /* lower 16 bits of dac sample interval counter */
- DAC_SAMPLE_INTERVAL_UPPER_REG = 0x56, /* upper 8 bits of dac sample interval counter */
+ /* lower 16 bits of dac sample interval counter */
+ DAC_SAMPLE_INTERVAL_LOWER_REG = 0x54,
+ /* upper 8 bits of dac sample interval counter */
+ DAC_SAMPLE_INTERVAL_UPPER_REG = 0x56,
DAC_SELECT_REG = 0x60,
DAC_START_REG = 0x64,
DAC_BUFFER_CLEAR_REG = 0x66, /* clear dac buffer */
};
+
static inline unsigned int dac_convert_reg(unsigned int channel)
{
return 0x70 + (2 * (channel & 0x1));
@@ -164,7 +178,9 @@
}
enum read_only_registers {
- HW_STATUS_REG = 0x0, /* hardware status register, reading this apparently clears pending interrupts as well */
+ /* hardware status register,
+ * reading this apparently clears pending interrupts as well */
+ HW_STATUS_REG = 0x0,
PIPE1_READ_REG = 0x4,
ADC_READ_PNTR_REG = 0x8,
LOWER_XFER_REG = 0x10,
@@ -174,12 +190,14 @@
enum read_write_registers {
I8255_4020_REG = 0x48, /* 8255 offset, for 4020 only */
- ADC_QUEUE_FIFO_REG = 0x100, /* external channel/gain queue, uses same bits as ADC_QUEUE_LOAD_REG */
+ /* external channel/gain queue, uses same bits as ADC_QUEUE_LOAD_REG */
+ ADC_QUEUE_FIFO_REG = 0x100,
ADC_FIFO_REG = 0x200, /* adc data fifo */
- DAC_FIFO_REG = 0x300, /* dac data fifo, has weird interactions with external channel queue */
+ /* dac data fifo, has weird interactions with external channel queue */
+ DAC_FIFO_REG = 0x300,
};
-/* priv(dev)->dio_counter_iobase registers */
+/* devpriv->dio_counter_iobase registers */
enum dio_counter_registers {
DIO_8255_OFFSET = 0x0,
DO_REG = 0x20,
@@ -191,13 +209,13 @@
/* bit definitions for write-only registers */
enum intr_enable_contents {
- ADC_INTR_SRC_MASK = 0x3, /* bits that set adc interrupt source */
- ADC_INTR_QFULL_BITS = 0x0, /* interrupt fifo quater full */
+ ADC_INTR_SRC_MASK = 0x3, /* adc interrupt source mask */
+ ADC_INTR_QFULL_BITS = 0x0, /* interrupt fifo quarter full */
ADC_INTR_EOC_BITS = 0x1, /* interrupt end of conversion */
ADC_INTR_EOSCAN_BITS = 0x2, /* interrupt end of scan */
- ADC_INTR_EOSEQ_BITS = 0x3, /* interrupt end of sequence (probably wont use this it's pretty fancy) */
+ ADC_INTR_EOSEQ_BITS = 0x3, /* interrupt end of sequence mask */
EN_ADC_INTR_SRC_BIT = 0x4, /* enable adc interrupt source */
- EN_ADC_DONE_INTR_BIT = 0x8, /* enable adc acquisition done interrupt */
+ EN_ADC_DONE_INTR_BIT = 0x8, /* enable adc acquisition done intr */
DAC_INTR_SRC_MASK = 0x30,
DAC_INTR_QEMPTY_BITS = 0x0,
DAC_INTR_HIGH_CHAN_BITS = 0x10,
@@ -211,25 +229,33 @@
};
enum hw_config_contents {
- MASTER_CLOCK_4020_MASK = 0x3, /* bits that specify master clock source for 4020 */
- INTERNAL_CLOCK_4020_BITS = 0x1, /* use 40 MHz internal master clock for 4020 */
+ MASTER_CLOCK_4020_MASK = 0x3, /* master clock source mask for 4020 */
+ INTERNAL_CLOCK_4020_BITS = 0x1, /* use 40 MHz internal master clock */
BNC_CLOCK_4020_BITS = 0x2, /* use BNC input for master clock */
EXT_CLOCK_4020_BITS = 0x3, /* use dio input for master clock */
- EXT_QUEUE_BIT = 0x200, /* use external channel/gain queue (more versatile than internal queue) */
- SLOW_DAC_BIT = 0x400, /* use 225 nanosec strobe when loading dac instead of 50 nanosec */
- HW_CONFIG_DUMMY_BITS = 0x2000, /* bit with unknown function yet given as default value in pci-das64 manual */
- DMA_CH_SELECT_BIT = 0x8000, /* bit selects channels 1/0 for analog input/output, otherwise 0/1 */
- FIFO_SIZE_REG = 0x4, /* allows adjustment of fifo sizes */
+ EXT_QUEUE_BIT = 0x200, /* use external channel/gain queue */
+ /* use 225 nanosec strobe when loading dac instead of 50 nanosec */
+ SLOW_DAC_BIT = 0x400,
+ /* bit with unknown function yet given as default value in pci-das64
+ * manual */
+ HW_CONFIG_DUMMY_BITS = 0x2000,
+ /* bit selects channels 1/0 for analog input/output, otherwise 0/1 */
+ DMA_CH_SELECT_BIT = 0x8000,
+ FIFO_SIZE_REG = 0x4, /* allows adjustment of fifo sizes */
DAC_FIFO_SIZE_MASK = 0xff00, /* bits that set dac fifo size */
- DAC_FIFO_BITS = 0xf800, /* 8k sample ao fifo */
+ DAC_FIFO_BITS = 0xf800, /* 8k sample ao fifo */
};
#define DAC_FIFO_SIZE 0x2000
enum daq_atrig_low_4020_contents {
- EXT_AGATE_BNC_BIT = 0x8000, /* use trig/ext clk bnc input for analog gate signal */
- EXT_STOP_TRIG_BNC_BIT = 0x4000, /* use trig/ext clk bnc input for external stop trigger signal */
- EXT_START_TRIG_BNC_BIT = 0x2000, /* use trig/ext clk bnc input for external start trigger signal */
+ /* use trig/ext clk bnc input for analog gate signal */
+ EXT_AGATE_BNC_BIT = 0x8000,
+ /* use trig/ext clk bnc input for external stop trigger signal */
+ EXT_STOP_TRIG_BNC_BIT = 0x4000,
+ /* use trig/ext clk bnc input for external start trigger signal */
+ EXT_START_TRIG_BNC_BIT = 0x2000,
};
+
static inline uint16_t analog_trig_low_threshold_bits(uint16_t threshold)
{
return threshold & 0xfff;
@@ -247,14 +273,17 @@
ADC_START_TRIG_ANALOG_BITS = 0x30,
ADC_START_TRIG_MASK = 0x30,
ADC_START_TRIG_FALLING_BIT = 0x40, /* trig 1 uses falling edge */
- ADC_EXT_CONV_FALLING_BIT = 0x800, /* external pacing uses falling edge */
- ADC_SAMPLE_COUNTER_EN_BIT = 0x1000, /* enable hardware scan counter */
+ /* external pacing uses falling edge */
+ ADC_EXT_CONV_FALLING_BIT = 0x800,
+ /* enable hardware scan counter */
+ ADC_SAMPLE_COUNTER_EN_BIT = 0x1000,
ADC_DMA_DISABLE_BIT = 0x4000, /* disables dma */
ADC_ENABLE_BIT = 0x8000, /* master adc enable */
};
enum adc_control1_contents {
- ADC_QUEUE_CONFIG_BIT = 0x1, /* should be set for boards with > 16 channels */
+ /* should be set for boards with > 16 channels */
+ ADC_QUEUE_CONFIG_BIT = 0x1,
CONVERT_POLARITY_BIT = 0x10,
EOC_POLARITY_BIT = 0x20,
ADC_SW_GATE_BIT = 0x40, /* software gate of adc */
@@ -263,10 +292,11 @@
ADC_LO_CHANNEL_4020_MASK = 0x300,
ADC_HI_CHANNEL_4020_MASK = 0xc00,
TWO_CHANNEL_4020_BITS = 0x1000, /* two channel mode for 4020 */
- FOUR_CHANNEL_4020_BITS = 0x2000, /* four channel mode for 4020 */
+ FOUR_CHANNEL_4020_BITS = 0x2000, /* four channel mode for 4020 */
CHANNEL_MODE_4020_MASK = 0x3000,
ADC_MODE_MASK = 0xf000,
};
+
static inline uint16_t adc_lo_chan_4020_bits(unsigned int channel)
{
return (channel & 0x3) << 8;
@@ -289,9 +319,10 @@
CAL_EN_64XX_BIT = 0x40, /* calibration enable for 64xx series */
SERIAL_DATA_IN_BIT = 0x80,
SERIAL_CLOCK_BIT = 0x100,
- CAL_EN_60XX_BIT = 0x200, /* calibration enable for 60xx series */
+ CAL_EN_60XX_BIT = 0x200, /* calibration enable for 60xx series */
CAL_GAIN_BIT = 0x800,
};
+
/* calibration sources for 6025 are:
* 0 : ground
* 1 : 10V
@@ -302,6 +333,7 @@
* 6 : dac channel 0
* 7 : dac channel 1
*/
+
static inline uint16_t adc_src_bits(unsigned int source)
{
return (source & 0xf) << 3;
@@ -315,10 +347,12 @@
enum adc_queue_load_contents {
UNIP_BIT = 0x800, /* unipolar/bipolar bit */
ADC_SE_DIFF_BIT = 0x1000, /* single-ended/ differential bit */
- ADC_COMMON_BIT = 0x2000, /* non-referenced single-ended (common-mode input) */
+ /* non-referenced single-ended (common-mode input) */
+ ADC_COMMON_BIT = 0x2000,
QUEUE_EOSEQ_BIT = 0x4000, /* queue end of sequence */
QUEUE_EOSCAN_BIT = 0x8000, /* queue end of scan */
};
+
static inline uint16_t adc_chan_bits(unsigned int channel)
{
return channel & 0x3f;
@@ -365,6 +399,7 @@
EXT_INTR_PENDING_BIT = 0x100,
ADC_STOP_BIT = 0x200,
};
+
static inline uint16_t pipe_full_bits(uint16_t hw_status_bits)
{
return (hw_status_bits >> 10) & 0x3;
@@ -393,9 +428,12 @@
};
enum range_cal_i2c_contents {
- ADC_SRC_4020_MASK = 0x70, /* bits that set what source the adc converter measures */
- BNC_TRIG_THRESHOLD_0V_BIT = 0x80, /* make bnc trig/ext clock threshold 0V instead of 2.5V */
+ /* bits that set what source the adc converter measures */
+ ADC_SRC_4020_MASK = 0x70,
+ /* make bnc trig/ext clock threshold 0V instead of 2.5V */
+ BNC_TRIG_THRESHOLD_0V_BIT = 0x80,
};
+
static inline uint8_t adc_src_4020_bits(unsigned int source)
{
return (source << 4) & ADC_SRC_4020_MASK;
@@ -562,11 +600,12 @@
const struct comedi_lrange *ai_range_table;
int ao_nchan; /* number of analog out channels */
int ao_bits; /* analog output resolution */
- int ao_scan_speed; /* analog output speed (for a scan, not conversion) */
+ int ao_scan_speed; /* analog output scan speed */
const struct comedi_lrange *ao_range_table;
const int *ao_range_code;
const struct hw_fifo_info *const ai_fifo;
- enum register_layout layout; /* different board families have slightly different registers */
+ /* different board families have slightly different registers */
+ enum register_layout layout;
unsigned has_8255:1;
};
@@ -596,7 +635,7 @@
#define MAX_AI_DMA_RING_COUNT (0x80000 / DMA_BUFFER_SIZE)
#define MIN_AI_DMA_RING_COUNT (0x10000 / DMA_BUFFER_SIZE)
#define AO_DMA_RING_COUNT (0x10000 / DMA_BUFFER_SIZE)
-static inline unsigned int ai_dma_ring_count(struct pcidas64_board *board)
+static inline unsigned int ai_dma_ring_count(const struct pcidas64_board *board)
{
if (board->layout == LAYOUT_4020)
return MAX_AI_DMA_RING_COUNT;
@@ -1025,24 +1064,23 @@
#endif
};
-static inline struct pcidas64_board *board(const struct comedi_device *dev)
-{
- return (struct pcidas64_board *)dev->board_ptr;
-}
-
static inline unsigned short se_diff_bit_6xxx(struct comedi_device *dev,
int use_differential)
{
- if ((board(dev)->layout == LAYOUT_64XX && !use_differential) ||
- (board(dev)->layout == LAYOUT_60XX && use_differential))
+ const struct pcidas64_board *thisboard = comedi_board(dev);
+
+ if ((thisboard->layout == LAYOUT_64XX && !use_differential) ||
+ (thisboard->layout == LAYOUT_60XX && use_differential))
return ADC_SE_DIFF_BIT;
else
return 0;
};
struct ext_clock_info {
- unsigned int divisor; /* master clock divisor to use for scans with external master clock */
- unsigned int chanspec; /* chanspec for master clock input when used as scan begin src */
+ /* master clock divisor to use for scans with external master clock */
+ unsigned int divisor;
+ /* chanspec for master clock input when used as scan begin src */
+ unsigned int chanspec;
};
/* this structure is for data unique to this hardware driver. */
@@ -1058,30 +1096,52 @@
/* local address (used by dma controller) */
uint32_t local0_iobase;
uint32_t local1_iobase;
- volatile unsigned int ai_count; /* number of analog input samples remaining */
- uint16_t *ai_buffer[MAX_AI_DMA_RING_COUNT]; /* dma buffers for analog input */
- dma_addr_t ai_buffer_bus_addr[MAX_AI_DMA_RING_COUNT]; /* physical addresses of ai dma buffers */
- struct plx_dma_desc *ai_dma_desc; /* array of ai dma descriptors read by plx9080, allocated to get proper alignment */
- dma_addr_t ai_dma_desc_bus_addr; /* physical address of ai dma descriptor array */
- volatile unsigned int ai_dma_index; /* index of the ai dma descriptor/buffer that is currently being used */
- uint16_t *ao_buffer[AO_DMA_RING_COUNT]; /* dma buffers for analog output */
- dma_addr_t ao_buffer_bus_addr[AO_DMA_RING_COUNT]; /* physical addresses of ao dma buffers */
+ /* number of analog input samples remaining */
+ volatile unsigned int ai_count;
+ /* dma buffers for analog input */
+ uint16_t *ai_buffer[MAX_AI_DMA_RING_COUNT];
+ /* physical addresses of ai dma buffers */
+ dma_addr_t ai_buffer_bus_addr[MAX_AI_DMA_RING_COUNT];
+ /* array of ai dma descriptors read by plx9080,
+ * allocated to get proper alignment */
+ struct plx_dma_desc *ai_dma_desc;
+ /* physical address of ai dma descriptor array */
+ dma_addr_t ai_dma_desc_bus_addr;
+ /* index of the ai dma descriptor/buffer
+ * that is currently being used */
+ volatile unsigned int ai_dma_index;
+ /* dma buffers for analog output */
+ uint16_t *ao_buffer[AO_DMA_RING_COUNT];
+ /* physical addresses of ao dma buffers */
+ dma_addr_t ao_buffer_bus_addr[AO_DMA_RING_COUNT];
struct plx_dma_desc *ao_dma_desc;
dma_addr_t ao_dma_desc_bus_addr;
- volatile unsigned int ao_dma_index; /* keeps track of buffer where the next ao sample should go */
- volatile unsigned long ao_count; /* number of analog output samples remaining */
- volatile unsigned int ao_value[2]; /* remember what the analog outputs are set to, to allow readback */
+ /* keeps track of buffer where the next ao sample should go */
+ volatile unsigned int ao_dma_index;
+ /* number of analog output samples remaining */
+ volatile unsigned long ao_count;
+ /* remember what the analog outputs are set to, to allow readback */
+ volatile unsigned int ao_value[2];
unsigned int hw_revision; /* stc chip hardware revision number */
- volatile unsigned int intr_enable_bits; /* last bits sent to INTR_ENABLE_REG register */
- volatile uint16_t adc_control1_bits; /* last bits sent to ADC_CONTROL1_REG register */
- volatile uint16_t fifo_size_bits; /* last bits sent to FIFO_SIZE_REG register */
- volatile uint16_t hw_config_bits; /* last bits sent to HW_CONFIG_REG register */
+ /* last bits sent to INTR_ENABLE_REG register */
+ volatile unsigned int intr_enable_bits;
+ /* last bits sent to ADC_CONTROL1_REG register */
+ volatile uint16_t adc_control1_bits;
+ /* last bits sent to FIFO_SIZE_REG register */
+ volatile uint16_t fifo_size_bits;
+ /* last bits sent to HW_CONFIG_REG register */
+ volatile uint16_t hw_config_bits;
volatile uint16_t dac_control1_bits;
- volatile uint32_t plx_control_bits; /* last bits written to plx9080 control register */
- volatile uint32_t plx_intcsr_bits; /* last bits written to plx interrupt control and status register */
- volatile int calibration_source; /* index of calibration source readable through ai ch0 */
- volatile uint8_t i2c_cal_range_bits; /* bits written to i2c calibration/range register */
- volatile unsigned int ext_trig_falling; /* configure digital triggers to trigger on falling edge */
+ /* last bits written to plx9080 control register */
+ volatile uint32_t plx_control_bits;
+ /* last bits written to plx interrupt control and status register */
+ volatile uint32_t plx_intcsr_bits;
+ /* index of calibration source readable through ai ch0 */
+ volatile int calibration_source;
+ /* bits written to i2c calibration/range register */
+ volatile uint8_t i2c_cal_range_bits;
+ /* configure digital triggers to trigger on falling edge */
+ volatile unsigned int ext_trig_falling;
/* states of various devices stored to enable read-back */
unsigned int ad8402_state[2];
unsigned int caldac_state[8];
@@ -1091,93 +1151,12 @@
short ao_bounce_buffer[DAC_FIFO_SIZE];
};
-/* inline function that makes it easier to
- * access the private structure.
- */
-static inline struct pcidas64_private *priv(struct comedi_device *dev)
-{
- return dev->private;
-}
-
-static int ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-static int ai_config_insn(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-static int ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-static int ao_readback_insn(struct comedi_device *dev,
- struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-static int ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s);
-static int ai_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_cmd *cmd);
-static int ao_cmd(struct comedi_device *dev, struct comedi_subdevice *s);
-static int ao_inttrig(struct comedi_device *dev,
- struct comedi_subdevice *subdev, unsigned int trig_num);
-static int ao_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_cmd *cmd);
-static irqreturn_t handle_interrupt(int irq, void *d);
-static int ai_cancel(struct comedi_device *dev, struct comedi_subdevice *s);
-static int ao_cancel(struct comedi_device *dev, struct comedi_subdevice *s);
-static int dio_callback(int dir, int port, int data, unsigned long arg);
-static int dio_callback_4020(int dir, int port, int data, unsigned long arg);
-static int di_rbits(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-static int do_wbits(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-static int dio_60xx_config_insn(struct comedi_device *dev,
- struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-static int dio_60xx_wbits(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-static int calib_read_insn(struct comedi_device *dev,
- struct comedi_subdevice *s, struct comedi_insn *insn,
- unsigned int *data);
-static int calib_write_insn(struct comedi_device *dev,
- struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-static int ad8402_read_insn(struct comedi_device *dev,
- struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-static void ad8402_write(struct comedi_device *dev, unsigned int channel,
- unsigned int value);
-static int ad8402_write_insn(struct comedi_device *dev,
- struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-static int eeprom_read_insn(struct comedi_device *dev,
- struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-static void check_adc_timing(struct comedi_device *dev, struct comedi_cmd *cmd);
-static unsigned int get_divisor(unsigned int ns, unsigned int flags);
-static void i2c_write(struct comedi_device *dev, unsigned int address,
- const uint8_t *data, unsigned int length);
-static void caldac_write(struct comedi_device *dev, unsigned int channel,
- unsigned int value);
-static int caldac_8800_write(struct comedi_device *dev, unsigned int address,
- uint8_t value);
-/* static int dac_1590_write(struct comedi_device *dev, unsigned int dac_a, unsigned int dac_b); */
-static int caldac_i2c_write(struct comedi_device *dev,
- unsigned int caldac_channel, unsigned int value);
-static void abort_dma(struct comedi_device *dev, unsigned int channel);
-static void disable_plx_interrupts(struct comedi_device *dev);
-static int set_ai_fifo_size(struct comedi_device *dev,
- unsigned int num_samples);
-static unsigned int ai_fifo_size(struct comedi_device *dev);
-static int set_ai_fifo_segment_length(struct comedi_device *dev,
- unsigned int num_entries);
-static void disable_ai_pacing(struct comedi_device *dev);
-static void disable_ai_interrupts(struct comedi_device *dev);
-static void enable_ai_interrupts(struct comedi_device *dev,
- const struct comedi_cmd *cmd);
-static unsigned int get_ao_divisor(unsigned int ns, unsigned int flags);
-static void load_ao_dma(struct comedi_device *dev,
- const struct comedi_cmd *cmd);
-
static unsigned int ai_range_bits_6xxx(const struct comedi_device *dev,
unsigned int range_index)
{
+ const struct pcidas64_board *thisboard = comedi_board(dev);
const struct comedi_krange *range =
- &board(dev)->ai_range_table->range[range_index];
+ &thisboard->ai_range_table->range[range_index];
unsigned int bits = 0;
switch (range->max) {
@@ -1220,7 +1199,9 @@
static unsigned int hw_revision(const struct comedi_device *dev,
uint16_t hw_status_bits)
{
- if (board(dev)->layout == LAYOUT_4020)
+ const struct pcidas64_board *thisboard = comedi_board(dev);
+
+ if (thisboard->layout == LAYOUT_4020)
return (hw_status_bits >> 13) & 0x7;
return (hw_status_bits >> 12) & 0xf;
@@ -1230,7 +1211,8 @@
volatile uint16_t *bits, unsigned int channel,
unsigned int range)
{
- unsigned int code = board(dev)->ao_range_code[range];
+ const struct pcidas64_board *thisboard = comedi_board(dev);
+ unsigned int code = thisboard->ao_range_code[range];
if (channel > 1)
comedi_error(dev, "bug! bad channel?");
@@ -1246,20 +1228,86 @@
return board->ao_nchan && board->layout != LAYOUT_4020;
}
+static void abort_dma(struct comedi_device *dev, unsigned int channel)
+{
+ struct pcidas64_private *devpriv = dev->private;
+ unsigned long flags;
+
+ /* spinlock for plx dma control/status reg */
+ spin_lock_irqsave(&dev->spinlock, flags);
+
+ plx9080_abort_dma(devpriv->plx9080_iobase, channel);
+
+ spin_unlock_irqrestore(&dev->spinlock, flags);
+}
+
+static void disable_plx_interrupts(struct comedi_device *dev)
+{
+ struct pcidas64_private *devpriv = dev->private;
+
+ devpriv->plx_intcsr_bits = 0;
+ writel(devpriv->plx_intcsr_bits,
+ devpriv->plx9080_iobase + PLX_INTRCS_REG);
+}
+
+static void disable_ai_interrupts(struct comedi_device *dev)
+{
+ struct pcidas64_private *devpriv = dev->private;
+ unsigned long flags;
+
+ spin_lock_irqsave(&dev->spinlock, flags);
+ devpriv->intr_enable_bits &=
+ ~EN_ADC_INTR_SRC_BIT & ~EN_ADC_DONE_INTR_BIT &
+ ~EN_ADC_ACTIVE_INTR_BIT & ~EN_ADC_STOP_INTR_BIT &
+ ~EN_ADC_OVERRUN_BIT & ~ADC_INTR_SRC_MASK;
+ writew(devpriv->intr_enable_bits,
+ devpriv->main_iobase + INTR_ENABLE_REG);
+ spin_unlock_irqrestore(&dev->spinlock, flags);
+
+ DEBUG_PRINT("intr enable bits 0x%x\n", devpriv->intr_enable_bits);
+}
+
+static void enable_ai_interrupts(struct comedi_device *dev,
+ const struct comedi_cmd *cmd)
+{
+ const struct pcidas64_board *thisboard = comedi_board(dev);
+ struct pcidas64_private *devpriv = dev->private;
+ uint32_t bits;
+ unsigned long flags;
+
+ bits = EN_ADC_OVERRUN_BIT | EN_ADC_DONE_INTR_BIT |
+ EN_ADC_ACTIVE_INTR_BIT | EN_ADC_STOP_INTR_BIT;
+ /* Use pio transfer and interrupt on end of conversion
+ * if TRIG_WAKE_EOS flag is set. */
+ if (cmd->flags & TRIG_WAKE_EOS) {
+ /* 4020 doesn't support pio transfers except for fifo dregs */
+ if (thisboard->layout != LAYOUT_4020)
+ bits |= ADC_INTR_EOSCAN_BITS | EN_ADC_INTR_SRC_BIT;
+ }
+ spin_lock_irqsave(&dev->spinlock, flags);
+ devpriv->intr_enable_bits |= bits;
+ writew(devpriv->intr_enable_bits,
+ devpriv->main_iobase + INTR_ENABLE_REG);
+ DEBUG_PRINT("intr enable bits 0x%x\n", devpriv->intr_enable_bits);
+ spin_unlock_irqrestore(&dev->spinlock, flags);
+}
+
/* initialize plx9080 chip */
static void init_plx9080(struct comedi_device *dev)
{
+ const struct pcidas64_board *thisboard = comedi_board(dev);
+ struct pcidas64_private *devpriv = dev->private;
uint32_t bits;
- void __iomem *plx_iobase = priv(dev)->plx9080_iobase;
+ void __iomem *plx_iobase = devpriv->plx9080_iobase;
- priv(dev)->plx_control_bits =
- readl(priv(dev)->plx9080_iobase + PLX_CONTROL_REG);
+ devpriv->plx_control_bits =
+ readl(devpriv->plx9080_iobase + PLX_CONTROL_REG);
/* plx9080 dump */
DEBUG_PRINT(" plx interrupt status 0x%x\n",
readl(plx_iobase + PLX_INTRCS_REG));
DEBUG_PRINT(" plx id bits 0x%x\n", readl(plx_iobase + PLX_ID_REG));
- DEBUG_PRINT(" plx control reg 0x%x\n", priv(dev)->plx_control_bits);
+ DEBUG_PRINT(" plx control reg 0x%x\n", devpriv->plx_control_bits);
DEBUG_PRINT(" plx mode/arbitration reg 0x%x\n",
readl(plx_iobase + PLX_MARB_REG));
DEBUG_PRINT(" plx region0 reg 0x%x\n",
@@ -1292,7 +1340,7 @@
#else
bits = 0;
#endif
- writel(bits, priv(dev)->plx9080_iobase + PLX_BIGEND_REG);
+ writel(bits, devpriv->plx9080_iobase + PLX_BIGEND_REG);
disable_plx_interrupts(dev);
@@ -1307,9 +1355,11 @@
bits |= PLX_EN_BTERM_BIT;
/* enable dma chaining */
bits |= PLX_EN_CHAIN_BIT;
- /* enable interrupt on dma done (probably don't need this, since chain never finishes) */
+ /* enable interrupt on dma done
+ * (probably don't need this, since chain never finishes) */
bits |= PLX_EN_DMA_DONE_INTR_BIT;
- /* don't increment local address during transfers (we are transferring from a fixed fifo register) */
+ /* don't increment local address during transfers
+ * (we are transferring from a fixed fifo register) */
bits |= PLX_LOCAL_ADDR_CONST_BIT;
/* route dma interrupt to pci bus */
bits |= PLX_DMA_INTR_PCI_BIT;
@@ -1318,324 +1368,235 @@
/* enable local burst mode */
bits |= PLX_DMA_LOCAL_BURST_EN_BIT;
/* 4020 uses 32 bit dma */
- if (board(dev)->layout == LAYOUT_4020) {
+ if (thisboard->layout == LAYOUT_4020)
bits |= PLX_LOCAL_BUS_32_WIDE_BITS;
- } else { /* localspace0 bus is 16 bits wide */
+ else /* localspace0 bus is 16 bits wide */
bits |= PLX_LOCAL_BUS_16_WIDE_BITS;
- }
writel(bits, plx_iobase + PLX_DMA1_MODE_REG);
- if (ao_cmd_is_supported(board(dev)))
+ if (ao_cmd_is_supported(thisboard))
writel(bits, plx_iobase + PLX_DMA0_MODE_REG);
/* enable interrupts on plx 9080 */
- priv(dev)->plx_intcsr_bits |=
+ devpriv->plx_intcsr_bits |=
ICS_AERR | ICS_PERR | ICS_PIE | ICS_PLIE | ICS_PAIE | ICS_LIE |
ICS_DMA0_E | ICS_DMA1_E;
- writel(priv(dev)->plx_intcsr_bits,
- priv(dev)->plx9080_iobase + PLX_INTRCS_REG);
+ writel(devpriv->plx_intcsr_bits,
+ devpriv->plx9080_iobase + PLX_INTRCS_REG);
}
-/* Allocate and initialize the subdevice structures.
- */
-static int setup_subdevices(struct comedi_device *dev)
+static void disable_ai_pacing(struct comedi_device *dev)
{
- struct comedi_subdevice *s;
- void __iomem *dio_8255_iobase;
- int i;
- int ret;
+ struct pcidas64_private *devpriv = dev->private;
+ unsigned long flags;
- ret = comedi_alloc_subdevices(dev, 10);
- if (ret)
- return ret;
+ disable_ai_interrupts(dev);
- s = &dev->subdevices[0];
- /* analog input subdevice */
- dev->read_subdev = s;
- s->type = COMEDI_SUBD_AI;
- s->subdev_flags = SDF_READABLE | SDF_GROUND | SDF_DITHER | SDF_CMD_READ;
- if (board(dev)->layout == LAYOUT_60XX)
- s->subdev_flags |= SDF_COMMON | SDF_DIFF;
- else if (board(dev)->layout == LAYOUT_64XX)
- s->subdev_flags |= SDF_DIFF;
- /* XXX Number of inputs in differential mode is ignored */
- s->n_chan = board(dev)->ai_se_chans;
- s->len_chanlist = 0x2000;
- s->maxdata = (1 << board(dev)->ai_bits) - 1;
- s->range_table = board(dev)->ai_range_table;
- s->insn_read = ai_rinsn;
- s->insn_config = ai_config_insn;
- s->do_cmd = ai_cmd;
- s->do_cmdtest = ai_cmdtest;
- s->cancel = ai_cancel;
- if (board(dev)->layout == LAYOUT_4020) {
- uint8_t data;
- /* set adc to read from inputs (not internal calibration sources) */
- priv(dev)->i2c_cal_range_bits = adc_src_4020_bits(4);
- /* set channels to +-5 volt input ranges */
- for (i = 0; i < s->n_chan; i++)
- priv(dev)->i2c_cal_range_bits |= attenuate_bit(i);
- data = priv(dev)->i2c_cal_range_bits;
- i2c_write(dev, RANGE_CAL_I2C_ADDR, &data, sizeof(data));
- }
+ spin_lock_irqsave(&dev->spinlock, flags);
+ devpriv->adc_control1_bits &= ~ADC_SW_GATE_BIT;
+ writew(devpriv->adc_control1_bits,
+ devpriv->main_iobase + ADC_CONTROL1_REG);
+ spin_unlock_irqrestore(&dev->spinlock, flags);
- /* analog output subdevice */
- s = &dev->subdevices[1];
- if (board(dev)->ao_nchan) {
- s->type = COMEDI_SUBD_AO;
- s->subdev_flags =
- SDF_READABLE | SDF_WRITABLE | SDF_GROUND | SDF_CMD_WRITE;
- s->n_chan = board(dev)->ao_nchan;
- s->maxdata = (1 << board(dev)->ao_bits) - 1;
- s->range_table = board(dev)->ao_range_table;
- s->insn_read = ao_readback_insn;
- s->insn_write = ao_winsn;
- if (ao_cmd_is_supported(board(dev))) {
- dev->write_subdev = s;
- s->do_cmdtest = ao_cmdtest;
- s->do_cmd = ao_cmd;
- s->len_chanlist = board(dev)->ao_nchan;
- s->cancel = ao_cancel;
- }
- } else {
- s->type = COMEDI_SUBD_UNUSED;
- }
-
- /* digital input */
- s = &dev->subdevices[2];
- if (board(dev)->layout == LAYOUT_64XX) {
- s->type = COMEDI_SUBD_DI;
- s->subdev_flags = SDF_READABLE;
- s->n_chan = 4;
- s->maxdata = 1;
- s->range_table = &range_digital;
- s->insn_bits = di_rbits;
- } else
- s->type = COMEDI_SUBD_UNUSED;
-
- /* digital output */
- if (board(dev)->layout == LAYOUT_64XX) {
- s = &dev->subdevices[3];
- s->type = COMEDI_SUBD_DO;
- s->subdev_flags = SDF_WRITABLE | SDF_READABLE;
- s->n_chan = 4;
- s->maxdata = 1;
- s->range_table = &range_digital;
- s->insn_bits = do_wbits;
- } else
- s->type = COMEDI_SUBD_UNUSED;
-
- /* 8255 */
- s = &dev->subdevices[4];
- if (board(dev)->has_8255) {
- if (board(dev)->layout == LAYOUT_4020) {
- dio_8255_iobase =
- priv(dev)->main_iobase + I8255_4020_REG;
- subdev_8255_init(dev, s, dio_callback_4020,
- (unsigned long)dio_8255_iobase);
- } else {
- dio_8255_iobase =
- priv(dev)->dio_counter_iobase + DIO_8255_OFFSET;
- subdev_8255_init(dev, s, dio_callback,
- (unsigned long)dio_8255_iobase);
- }
- } else
- s->type = COMEDI_SUBD_UNUSED;
-
- /* 8 channel dio for 60xx */
- s = &dev->subdevices[5];
- if (board(dev)->layout == LAYOUT_60XX) {
- s->type = COMEDI_SUBD_DIO;
- s->subdev_flags = SDF_WRITABLE | SDF_READABLE;
- s->n_chan = 8;
- s->maxdata = 1;
- s->range_table = &range_digital;
- s->insn_config = dio_60xx_config_insn;
- s->insn_bits = dio_60xx_wbits;
- } else
- s->type = COMEDI_SUBD_UNUSED;
-
- /* caldac */
- s = &dev->subdevices[6];
- s->type = COMEDI_SUBD_CALIB;
- s->subdev_flags = SDF_READABLE | SDF_WRITABLE | SDF_INTERNAL;
- s->n_chan = 8;
- if (board(dev)->layout == LAYOUT_4020)
- s->maxdata = 0xfff;
- else
- s->maxdata = 0xff;
- s->insn_read = calib_read_insn;
- s->insn_write = calib_write_insn;
- for (i = 0; i < s->n_chan; i++)
- caldac_write(dev, i, s->maxdata / 2);
-
- /* 2 channel ad8402 potentiometer */
- s = &dev->subdevices[7];
- if (board(dev)->layout == LAYOUT_64XX) {
- s->type = COMEDI_SUBD_CALIB;
- s->subdev_flags = SDF_READABLE | SDF_WRITABLE | SDF_INTERNAL;
- s->n_chan = 2;
- s->insn_read = ad8402_read_insn;
- s->insn_write = ad8402_write_insn;
- s->maxdata = 0xff;
- for (i = 0; i < s->n_chan; i++)
- ad8402_write(dev, i, s->maxdata / 2);
- } else
- s->type = COMEDI_SUBD_UNUSED;
-
- /* serial EEPROM, if present */
- s = &dev->subdevices[8];
- if (readl(priv(dev)->plx9080_iobase + PLX_CONTROL_REG) & CTL_EECHK) {
- s->type = COMEDI_SUBD_MEMORY;
- s->subdev_flags = SDF_READABLE | SDF_INTERNAL;
- s->n_chan = 128;
- s->maxdata = 0xffff;
- s->insn_read = eeprom_read_insn;
- } else
- s->type = COMEDI_SUBD_UNUSED;
-
- /* user counter subd XXX */
- s = &dev->subdevices[9];
- s->type = COMEDI_SUBD_UNUSED;
-
- return 0;
+ /* disable pacing, triggering, etc */
+ writew(ADC_DMA_DISABLE_BIT | ADC_SOFT_GATE_BITS | ADC_GATE_LEVEL_BIT,
+ devpriv->main_iobase + ADC_CONTROL0_REG);
}
-static void disable_plx_interrupts(struct comedi_device *dev)
+static int set_ai_fifo_segment_length(struct comedi_device *dev,
+ unsigned int num_entries)
{
- priv(dev)->plx_intcsr_bits = 0;
- writel(priv(dev)->plx_intcsr_bits,
- priv(dev)->plx9080_iobase + PLX_INTRCS_REG);
+ const struct pcidas64_board *thisboard = comedi_board(dev);
+ struct pcidas64_private *devpriv = dev->private;
+ static const int increment_size = 0x100;
+ const struct hw_fifo_info *const fifo = thisboard->ai_fifo;
+ unsigned int num_increments;
+ uint16_t bits;
+
+ if (num_entries < increment_size)
+ num_entries = increment_size;
+ if (num_entries > fifo->max_segment_length)
+ num_entries = fifo->max_segment_length;
+
+ /* 1 == 256 entries, 2 == 512 entries, etc */
+ num_increments = (num_entries + increment_size / 2) / increment_size;
+
+ bits = (~(num_increments - 1)) & fifo->fifo_size_reg_mask;
+ devpriv->fifo_size_bits &= ~fifo->fifo_size_reg_mask;
+ devpriv->fifo_size_bits |= bits;
+ writew(devpriv->fifo_size_bits,
+ devpriv->main_iobase + FIFO_SIZE_REG);
+
+ devpriv->ai_fifo_segment_length = num_increments * increment_size;
+
+ DEBUG_PRINT("set hardware fifo segment length to %i\n",
+ devpriv->ai_fifo_segment_length);
+
+ return devpriv->ai_fifo_segment_length;
+}
+
+/* adjusts the size of hardware fifo (which determines block size for dma xfers) */
+static int set_ai_fifo_size(struct comedi_device *dev, unsigned int num_samples)
+{
+ const struct pcidas64_board *thisboard = comedi_board(dev);
+ unsigned int num_fifo_entries;
+ int retval;
+ const struct hw_fifo_info *const fifo = thisboard->ai_fifo;
+
+ num_fifo_entries = num_samples / fifo->sample_packing_ratio;
+
+ retval = set_ai_fifo_segment_length(dev,
+ num_fifo_entries /
+ fifo->num_segments);
+ if (retval < 0)
+ return retval;
+
+ num_samples = retval * fifo->num_segments * fifo->sample_packing_ratio;
+
+ DEBUG_PRINT("set hardware fifo size to %i\n", num_samples);
+
+ return num_samples;
+}
+
+/* query length of fifo */
+static unsigned int ai_fifo_size(struct comedi_device *dev)
+{
+ const struct pcidas64_board *thisboard = comedi_board(dev);
+ struct pcidas64_private *devpriv = dev->private;
+
+ return devpriv->ai_fifo_segment_length *
+ thisboard->ai_fifo->num_segments *
+ thisboard->ai_fifo->sample_packing_ratio;
}
static void init_stc_registers(struct comedi_device *dev)
{
+ const struct pcidas64_board *thisboard = comedi_board(dev);
+ struct pcidas64_private *devpriv = dev->private;
uint16_t bits;
unsigned long flags;
spin_lock_irqsave(&dev->spinlock, flags);
- /* bit should be set for 6025, although docs say boards with <= 16 chans should be cleared XXX */
+ /* bit should be set for 6025,
+ * although docs say boards with <= 16 chans should be cleared XXX */
if (1)
- priv(dev)->adc_control1_bits |= ADC_QUEUE_CONFIG_BIT;
- writew(priv(dev)->adc_control1_bits,
- priv(dev)->main_iobase + ADC_CONTROL1_REG);
+ devpriv->adc_control1_bits |= ADC_QUEUE_CONFIG_BIT;
+ writew(devpriv->adc_control1_bits,
+ devpriv->main_iobase + ADC_CONTROL1_REG);
/* 6402/16 manual says this register must be initialized to 0xff? */
- writew(0xff, priv(dev)->main_iobase + ADC_SAMPLE_INTERVAL_UPPER_REG);
+ writew(0xff, devpriv->main_iobase + ADC_SAMPLE_INTERVAL_UPPER_REG);
bits = SLOW_DAC_BIT | DMA_CH_SELECT_BIT;
- if (board(dev)->layout == LAYOUT_4020)
+ if (thisboard->layout == LAYOUT_4020)
bits |= INTERNAL_CLOCK_4020_BITS;
- priv(dev)->hw_config_bits |= bits;
- writew(priv(dev)->hw_config_bits,
- priv(dev)->main_iobase + HW_CONFIG_REG);
+ devpriv->hw_config_bits |= bits;
+ writew(devpriv->hw_config_bits,
+ devpriv->main_iobase + HW_CONFIG_REG);
- writew(0, priv(dev)->main_iobase + DAQ_SYNC_REG);
- writew(0, priv(dev)->main_iobase + CALIBRATION_REG);
+ writew(0, devpriv->main_iobase + DAQ_SYNC_REG);
+ writew(0, devpriv->main_iobase + CALIBRATION_REG);
spin_unlock_irqrestore(&dev->spinlock, flags);
/* set fifos to maximum size */
- priv(dev)->fifo_size_bits |= DAC_FIFO_BITS;
+ devpriv->fifo_size_bits |= DAC_FIFO_BITS;
set_ai_fifo_segment_length(dev,
- board(dev)->ai_fifo->max_segment_length);
+ thisboard->ai_fifo->max_segment_length);
- priv(dev)->dac_control1_bits = DAC_OUTPUT_ENABLE_BIT;
- priv(dev)->intr_enable_bits = /* EN_DAC_INTR_SRC_BIT | DAC_INTR_QEMPTY_BITS | */
- EN_DAC_DONE_INTR_BIT | EN_DAC_UNDERRUN_BIT;
- writew(priv(dev)->intr_enable_bits,
- priv(dev)->main_iobase + INTR_ENABLE_REG);
+ devpriv->dac_control1_bits = DAC_OUTPUT_ENABLE_BIT;
+ devpriv->intr_enable_bits =
+ /* EN_DAC_INTR_SRC_BIT | DAC_INTR_QEMPTY_BITS | */
+ EN_DAC_DONE_INTR_BIT | EN_DAC_UNDERRUN_BIT;
+ writew(devpriv->intr_enable_bits,
+ devpriv->main_iobase + INTR_ENABLE_REG);
disable_ai_pacing(dev);
};
static int alloc_and_init_dma_members(struct comedi_device *dev)
{
+ const struct pcidas64_board *thisboard = comedi_board(dev);
struct pci_dev *pcidev = comedi_to_pci_dev(dev);
+ struct pcidas64_private *devpriv = dev->private;
int i;
/* alocate pci dma buffers */
- for (i = 0; i < ai_dma_ring_count(board(dev)); i++) {
- priv(dev)->ai_buffer[i] =
- pci_alloc_consistent(pcidev, DMA_BUFFER_SIZE,
- &priv(dev)->ai_buffer_bus_addr[i]);
- if (priv(dev)->ai_buffer[i] == NULL)
+ for (i = 0; i < ai_dma_ring_count(thisboard); i++) {
+ devpriv->ai_buffer[i] =
+ pci_alloc_consistent(pcidev, DMA_BUFFER_SIZE,
+ &devpriv->ai_buffer_bus_addr[i]);
+ if (devpriv->ai_buffer[i] == NULL)
return -ENOMEM;
}
for (i = 0; i < AO_DMA_RING_COUNT; i++) {
- if (ao_cmd_is_supported(board(dev))) {
- priv(dev)->ao_buffer[i] =
- pci_alloc_consistent(pcidev,
- DMA_BUFFER_SIZE,
- &priv(dev)->
- ao_buffer_bus_addr[i]);
- if (priv(dev)->ao_buffer[i] == NULL)
+ if (ao_cmd_is_supported(thisboard)) {
+ devpriv->ao_buffer[i] =
+ pci_alloc_consistent(pcidev, DMA_BUFFER_SIZE,
+ &devpriv->
+ ao_buffer_bus_addr[i]);
+ if (devpriv->ao_buffer[i] == NULL)
return -ENOMEM;
}
}
/* allocate dma descriptors */
- priv(dev)->ai_dma_desc =
- pci_alloc_consistent(pcidev,
- sizeof(struct plx_dma_desc) *
- ai_dma_ring_count(board(dev)),
- &priv(dev)->ai_dma_desc_bus_addr);
- if (priv(dev)->ai_dma_desc == NULL)
+ devpriv->ai_dma_desc =
+ pci_alloc_consistent(pcidev, sizeof(struct plx_dma_desc) *
+ ai_dma_ring_count(thisboard),
+ &devpriv->ai_dma_desc_bus_addr);
+ if (devpriv->ai_dma_desc == NULL)
return -ENOMEM;
- DEBUG_PRINT("ai dma descriptors start at bus addr 0x%x\n",
- priv(dev)->ai_dma_desc_bus_addr);
- if (ao_cmd_is_supported(board(dev))) {
- priv(dev)->ao_dma_desc =
- pci_alloc_consistent(pcidev,
- sizeof(struct plx_dma_desc) *
- AO_DMA_RING_COUNT,
- &priv(dev)->ao_dma_desc_bus_addr);
- if (priv(dev)->ao_dma_desc == NULL)
+ DEBUG_PRINT("ai dma descriptors start at bus addr 0x%llx\n",
+ (unsigned long long)devpriv->ai_dma_desc_bus_addr);
+ if (ao_cmd_is_supported(thisboard)) {
+ devpriv->ao_dma_desc =
+ pci_alloc_consistent(pcidev,
+ sizeof(struct plx_dma_desc) *
+ AO_DMA_RING_COUNT,
+ &devpriv->ao_dma_desc_bus_addr);
+ if (devpriv->ao_dma_desc == NULL)
return -ENOMEM;
- DEBUG_PRINT("ao dma descriptors start at bus addr 0x%x\n",
- priv(dev)->ao_dma_desc_bus_addr);
+ DEBUG_PRINT("ao dma descriptors start at bus addr 0x%llx\n",
+ (unsigned long long)devpriv->ao_dma_desc_bus_addr);
}
/* initialize dma descriptors */
- for (i = 0; i < ai_dma_ring_count(board(dev)); i++) {
- priv(dev)->ai_dma_desc[i].pci_start_addr =
- cpu_to_le32(priv(dev)->ai_buffer_bus_addr[i]);
- if (board(dev)->layout == LAYOUT_4020)
- priv(dev)->ai_dma_desc[i].local_start_addr =
- cpu_to_le32(priv(dev)->local1_iobase +
- ADC_FIFO_REG);
+ for (i = 0; i < ai_dma_ring_count(thisboard); i++) {
+ devpriv->ai_dma_desc[i].pci_start_addr =
+ cpu_to_le32(devpriv->ai_buffer_bus_addr[i]);
+ if (thisboard->layout == LAYOUT_4020)
+ devpriv->ai_dma_desc[i].local_start_addr =
+ cpu_to_le32(devpriv->local1_iobase +
+ ADC_FIFO_REG);
else
- priv(dev)->ai_dma_desc[i].local_start_addr =
- cpu_to_le32(priv(dev)->local0_iobase +
- ADC_FIFO_REG);
- priv(dev)->ai_dma_desc[i].transfer_size = cpu_to_le32(0);
- priv(dev)->ai_dma_desc[i].next =
- cpu_to_le32((priv(dev)->ai_dma_desc_bus_addr + ((i +
- 1) %
- ai_dma_ring_count
- (board
- (dev))) *
- sizeof(priv(dev)->ai_dma_desc[0])) |
- PLX_DESC_IN_PCI_BIT | PLX_INTR_TERM_COUNT |
- PLX_XFER_LOCAL_TO_PCI);
+ devpriv->ai_dma_desc[i].local_start_addr =
+ cpu_to_le32(devpriv->local0_iobase +
+ ADC_FIFO_REG);
+ devpriv->ai_dma_desc[i].transfer_size = cpu_to_le32(0);
+ devpriv->ai_dma_desc[i].next =
+ cpu_to_le32((devpriv->ai_dma_desc_bus_addr +
+ ((i + 1) % ai_dma_ring_count(thisboard)) *
+ sizeof(devpriv->ai_dma_desc[0])) |
+ PLX_DESC_IN_PCI_BIT | PLX_INTR_TERM_COUNT |
+ PLX_XFER_LOCAL_TO_PCI);
}
- if (ao_cmd_is_supported(board(dev))) {
+ if (ao_cmd_is_supported(thisboard)) {
for (i = 0; i < AO_DMA_RING_COUNT; i++) {
- priv(dev)->ao_dma_desc[i].pci_start_addr =
- cpu_to_le32(priv(dev)->ao_buffer_bus_addr[i]);
- priv(dev)->ao_dma_desc[i].local_start_addr =
- cpu_to_le32(priv(dev)->local0_iobase +
- DAC_FIFO_REG);
- priv(dev)->ao_dma_desc[i].transfer_size =
- cpu_to_le32(0);
- priv(dev)->ao_dma_desc[i].next =
- cpu_to_le32((priv(dev)->ao_dma_desc_bus_addr +
- ((i + 1) % (AO_DMA_RING_COUNT)) *
- sizeof(priv(dev)->ao_dma_desc[0])) |
- PLX_DESC_IN_PCI_BIT |
- PLX_INTR_TERM_COUNT);
+ devpriv->ao_dma_desc[i].pci_start_addr =
+ cpu_to_le32(devpriv->ao_buffer_bus_addr[i]);
+ devpriv->ao_dma_desc[i].local_start_addr =
+ cpu_to_le32(devpriv->local0_iobase +
+ DAC_FIFO_REG);
+ devpriv->ao_dma_desc[i].transfer_size = cpu_to_le32(0);
+ devpriv->ao_dma_desc[i].next =
+ cpu_to_le32((devpriv->ao_dma_desc_bus_addr +
+ ((i + 1) % (AO_DMA_RING_COUNT)) *
+ sizeof(devpriv->ao_dma_desc[0])) |
+ PLX_DESC_IN_PCI_BIT |
+ PLX_INTR_TERM_COUNT);
}
}
return 0;
@@ -1649,216 +1610,140 @@
"Use internal AI channel queue (channels must be consecutive and use same range/aref)");
}
-static struct pci_dev *cb_pcidas64_find_pci_dev(struct comedi_device *dev,
- struct comedi_devconfig *it)
+/* Their i2c requires a huge delay on setting clock or data high for some reason */
+static const int i2c_high_udelay = 1000;
+static const int i2c_low_udelay = 10;
+
+/* set i2c data line high or low */
+static void i2c_set_sda(struct comedi_device *dev, int state)
{
- struct pci_dev *pcidev = NULL;
- int bus = it->options[0];
- int slot = it->options[1];
- int i;
+ struct pcidas64_private *devpriv = dev->private;
+ static const int data_bit = CTL_EE_W;
+ void __iomem *plx_control_addr = devpriv->plx9080_iobase +
+ PLX_CONTROL_REG;
- for_each_pci_dev(pcidev) {
- if (bus || slot) {
- if (bus != pcidev->bus->number ||
- slot != PCI_SLOT(pcidev->devfn))
- continue;
- }
- if (pcidev->vendor != PCI_VENDOR_ID_COMPUTERBOARDS)
- continue;
+ if (state) {
+ /* set data line high */
+ devpriv->plx_control_bits &= ~data_bit;
+ writel(devpriv->plx_control_bits, plx_control_addr);
+ udelay(i2c_high_udelay);
+ } else { /* set data line low */
- for (i = 0; i < ARRAY_SIZE(pcidas64_boards); i++) {
- if (pcidas64_boards[i].device_id != pcidev->device)
- continue;
- dev->board_ptr = pcidas64_boards + i;
- return pcidev;
- }
+ devpriv->plx_control_bits |= data_bit;
+ writel(devpriv->plx_control_bits, plx_control_addr);
+ udelay(i2c_low_udelay);
}
- dev_err(dev->class_dev,
- "No supported board found! (req. bus %d, slot %d)\n",
- bus, slot);
- return NULL;
}
-/*
- * Attach is called by the Comedi core to configure the driver
- * for a particular board.
- */
-static int attach(struct comedi_device *dev, struct comedi_devconfig *it)
+/* set i2c clock line high or low */
+static void i2c_set_scl(struct comedi_device *dev, int state)
{
- struct pci_dev *pcidev;
- uint32_t local_range, local_decode;
- int retval;
+ struct pcidas64_private *devpriv = dev->private;
+ static const int clock_bit = CTL_USERO;
+ void __iomem *plx_control_addr = devpriv->plx9080_iobase +
+ PLX_CONTROL_REG;
-/*
- * Allocate the private structure area.
- */
- if (alloc_private(dev, sizeof(struct pcidas64_private)) < 0)
- return -ENOMEM;
+ if (state) {
+ /* set clock line high */
+ devpriv->plx_control_bits &= ~clock_bit;
+ writel(devpriv->plx_control_bits, plx_control_addr);
+ udelay(i2c_high_udelay);
+ } else { /* set clock line low */
- pcidev = cb_pcidas64_find_pci_dev(dev, it);
- if (!pcidev)
- return -EIO;
- comedi_set_hw_dev(dev, &pcidev->dev);
-
- if (comedi_pci_enable(pcidev, dev->driver->driver_name)) {
- dev_warn(dev->class_dev,
- "failed to enable PCI device and request regions\n");
- return -EIO;
+ devpriv->plx_control_bits |= clock_bit;
+ writel(devpriv->plx_control_bits, plx_control_addr);
+ udelay(i2c_low_udelay);
}
- pci_set_master(pcidev);
-
- /* Initialize dev->board_name */
- dev->board_name = board(dev)->name;
-
- dev->iobase = pci_resource_start(pcidev, MAIN_BADDRINDEX);
-
- priv(dev)->plx9080_phys_iobase =
- pci_resource_start(pcidev, PLX9080_BADDRINDEX);
- priv(dev)->main_phys_iobase = dev->iobase;
- priv(dev)->dio_counter_phys_iobase =
- pci_resource_start(pcidev, DIO_COUNTER_BADDRINDEX);
-
- /* remap, won't work with 2.0 kernels but who cares */
- priv(dev)->plx9080_iobase = ioremap(priv(dev)->plx9080_phys_iobase,
- pci_resource_len(pcidev,
- PLX9080_BADDRINDEX));
- priv(dev)->main_iobase =
- ioremap(priv(dev)->main_phys_iobase,
- pci_resource_len(pcidev, MAIN_BADDRINDEX));
- priv(dev)->dio_counter_iobase =
- ioremap(priv(dev)->dio_counter_phys_iobase,
- pci_resource_len(pcidev, DIO_COUNTER_BADDRINDEX));
-
- if (!priv(dev)->plx9080_iobase || !priv(dev)->main_iobase
- || !priv(dev)->dio_counter_iobase) {
- dev_warn(dev->class_dev, "failed to remap io memory\n");
- return -ENOMEM;
- }
-
- DEBUG_PRINT(" plx9080 remapped to 0x%p\n", priv(dev)->plx9080_iobase);
- DEBUG_PRINT(" main remapped to 0x%p\n", priv(dev)->main_iobase);
- DEBUG_PRINT(" diocounter remapped to 0x%p\n",
- priv(dev)->dio_counter_iobase);
-
- /* figure out what local addresses are */
- local_range =
- readl(priv(dev)->plx9080_iobase + PLX_LAS0RNG_REG) & LRNG_MEM_MASK;
- local_decode =
- readl(priv(dev)->plx9080_iobase +
- PLX_LAS0MAP_REG) & local_range & LMAP_MEM_MASK;
- priv(dev)->local0_iobase =
- ((uint32_t) priv(dev)->main_phys_iobase & ~local_range) |
- local_decode;
- local_range =
- readl(priv(dev)->plx9080_iobase + PLX_LAS1RNG_REG) & LRNG_MEM_MASK;
- local_decode =
- readl(priv(dev)->plx9080_iobase +
- PLX_LAS1MAP_REG) & local_range & LMAP_MEM_MASK;
- priv(dev)->local1_iobase =
- ((uint32_t) priv(dev)->dio_counter_phys_iobase & ~local_range) |
- local_decode;
-
- DEBUG_PRINT(" local 0 io addr 0x%x\n", priv(dev)->local0_iobase);
- DEBUG_PRINT(" local 1 io addr 0x%x\n", priv(dev)->local1_iobase);
-
- retval = alloc_and_init_dma_members(dev);
- if (retval < 0)
- return retval;
-
- priv(dev)->hw_revision =
- hw_revision(dev, readw(priv(dev)->main_iobase + HW_STATUS_REG));
- dev_dbg(dev->class_dev, "stc hardware revision %i\n",
- priv(dev)->hw_revision);
- init_plx9080(dev);
- init_stc_registers(dev);
- /* get irq */
- if (request_irq(pcidev->irq, handle_interrupt, IRQF_SHARED,
- "cb_pcidas64", dev)) {
- dev_dbg(dev->class_dev, "unable to allocate irq %u\n",
- pcidev->irq);
- return -EINVAL;
- }
- dev->irq = pcidev->irq;
- dev_dbg(dev->class_dev, "irq %u\n", dev->irq);
-
- retval = setup_subdevices(dev);
- if (retval < 0)
- return retval;
-
-
- return 0;
}
-static void detach(struct comedi_device *dev)
+static void i2c_write_byte(struct comedi_device *dev, uint8_t byte)
{
- struct pci_dev *pcidev = comedi_to_pci_dev(dev);
+ uint8_t bit;
+ unsigned int num_bits = 8;
+
+ DEBUG_PRINT("writing to i2c byte 0x%x\n", byte);
+
+ for (bit = 1 << (num_bits - 1); bit; bit >>= 1) {
+ i2c_set_scl(dev, 0);
+ if ((byte & bit))
+ i2c_set_sda(dev, 1);
+ else
+ i2c_set_sda(dev, 0);
+ i2c_set_scl(dev, 1);
+ }
+}
+
+/* we can't really read the lines, so fake it */
+static int i2c_read_ack(struct comedi_device *dev)
+{
+ i2c_set_scl(dev, 0);
+ i2c_set_sda(dev, 1);
+ i2c_set_scl(dev, 1);
+
+ return 0; /* return fake acknowledge bit */
+}
+
+/* send start bit */
+static void i2c_start(struct comedi_device *dev)
+{
+ i2c_set_scl(dev, 1);
+ i2c_set_sda(dev, 1);
+ i2c_set_sda(dev, 0);
+}
+
+/* send stop bit */
+static void i2c_stop(struct comedi_device *dev)
+{
+ i2c_set_scl(dev, 0);
+ i2c_set_sda(dev, 0);
+ i2c_set_scl(dev, 1);
+ i2c_set_sda(dev, 1);
+}
+
+static void i2c_write(struct comedi_device *dev, unsigned int address,
+ const uint8_t *data, unsigned int length)
+{
+ struct pcidas64_private *devpriv = dev->private;
unsigned int i;
+ uint8_t bitstream;
+ static const int read_bit = 0x1;
- if (dev->irq)
- free_irq(dev->irq, dev);
- if (priv(dev)) {
- if (pcidev) {
- if (priv(dev)->plx9080_iobase) {
- disable_plx_interrupts(dev);
- iounmap(priv(dev)->plx9080_iobase);
- }
- if (priv(dev)->main_iobase)
- iounmap(priv(dev)->main_iobase);
- if (priv(dev)->dio_counter_iobase)
- iounmap(priv(dev)->dio_counter_iobase);
- /* free pci dma buffers */
- for (i = 0; i < ai_dma_ring_count(board(dev)); i++) {
- if (priv(dev)->ai_buffer[i])
- pci_free_consistent(pcidev,
- DMA_BUFFER_SIZE,
- priv(dev)->
- ai_buffer[i],
- priv
- (dev)->ai_buffer_bus_addr
- [i]);
- }
- for (i = 0; i < AO_DMA_RING_COUNT; i++) {
- if (priv(dev)->ao_buffer[i])
- pci_free_consistent(pcidev,
- DMA_BUFFER_SIZE,
- priv(dev)->
- ao_buffer[i],
- priv
- (dev)->ao_buffer_bus_addr
- [i]);
- }
- /* free dma descriptors */
- if (priv(dev)->ai_dma_desc)
- pci_free_consistent(pcidev,
- sizeof(struct plx_dma_desc)
- *
- ai_dma_ring_count(board
- (dev)),
- priv(dev)->ai_dma_desc,
- priv(dev)->
- ai_dma_desc_bus_addr);
- if (priv(dev)->ao_dma_desc)
- pci_free_consistent(pcidev,
- sizeof(struct plx_dma_desc)
- * AO_DMA_RING_COUNT,
- priv(dev)->ao_dma_desc,
- priv(dev)->
- ao_dma_desc_bus_addr);
+ /* XXX need mutex to prevent simultaneous attempts to access
+ * eeprom and i2c bus */
+
+ /* make sure we dont send anything to eeprom */
+ devpriv->plx_control_bits &= ~CTL_EE_CS;
+
+ i2c_stop(dev);
+ i2c_start(dev);
+
+ /* send address and write bit */
+ bitstream = (address << 1) & ~read_bit;
+ i2c_write_byte(dev, bitstream);
+
+ /* get acknowledge */
+ if (i2c_read_ack(dev) != 0) {
+ comedi_error(dev, "i2c write failed: no acknowledge");
+ i2c_stop(dev);
+ return;
+ }
+ /* write data bytes */
+ for (i = 0; i < length; i++) {
+ i2c_write_byte(dev, data[i]);
+ if (i2c_read_ack(dev) != 0) {
+ comedi_error(dev, "i2c write failed: no acknowledge");
+ i2c_stop(dev);
+ return;
}
}
- if (dev->subdevices)
- subdev_8255_cleanup(dev, &dev->subdevices[4]);
- if (pcidev) {
- if (dev->iobase)
- comedi_pci_disable(pcidev);
-
- pci_dev_put(pcidev);
- }
+ i2c_stop(dev);
}
static int ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
+ const struct pcidas64_board *thisboard = comedi_board(dev);
+ struct pcidas64_private *devpriv = dev->private;
unsigned int bits = 0, n, i;
unsigned int channel, range, aref;
unsigned long flags;
@@ -1875,35 +1760,37 @@
spin_lock_irqsave(&dev->spinlock, flags);
if (insn->chanspec & CR_ALT_FILTER)
- priv(dev)->adc_control1_bits |= ADC_DITHER_BIT;
+ devpriv->adc_control1_bits |= ADC_DITHER_BIT;
else
- priv(dev)->adc_control1_bits &= ~ADC_DITHER_BIT;
- writew(priv(dev)->adc_control1_bits,
- priv(dev)->main_iobase + ADC_CONTROL1_REG);
+ devpriv->adc_control1_bits &= ~ADC_DITHER_BIT;
+ writew(devpriv->adc_control1_bits,
+ devpriv->main_iobase + ADC_CONTROL1_REG);
spin_unlock_irqrestore(&dev->spinlock, flags);
- if (board(dev)->layout != LAYOUT_4020) {
+ if (thisboard->layout != LAYOUT_4020) {
/* use internal queue */
- priv(dev)->hw_config_bits &= ~EXT_QUEUE_BIT;
- writew(priv(dev)->hw_config_bits,
- priv(dev)->main_iobase + HW_CONFIG_REG);
+ devpriv->hw_config_bits &= ~EXT_QUEUE_BIT;
+ writew(devpriv->hw_config_bits,
+ devpriv->main_iobase + HW_CONFIG_REG);
/* ALT_SOURCE is internal calibration reference */
if (insn->chanspec & CR_ALT_SOURCE) {
unsigned int cal_en_bit;
DEBUG_PRINT("reading calibration source\n");
- if (board(dev)->layout == LAYOUT_60XX)
+ if (thisboard->layout == LAYOUT_60XX)
cal_en_bit = CAL_EN_60XX_BIT;
else
cal_en_bit = CAL_EN_64XX_BIT;
- /* select internal reference source to connect to channel 0 */
+ /* select internal reference source to connect
+ * to channel 0 */
writew(cal_en_bit |
- adc_src_bits(priv(dev)->calibration_source),
- priv(dev)->main_iobase + CALIBRATION_REG);
+ adc_src_bits(devpriv->calibration_source),
+ devpriv->main_iobase + CALIBRATION_REG);
} else {
- /* make sure internal calibration source is turned off */
- writew(0, priv(dev)->main_iobase + CALIBRATION_REG);
+ /* make sure internal calibration source
+ * is turned off */
+ writew(0, devpriv->main_iobase + CALIBRATION_REG);
}
/* load internal queue */
bits = 0;
@@ -1916,56 +1803,56 @@
bits |= adc_chan_bits(channel);
/* set stop channel */
writew(adc_chan_bits(channel),
- priv(dev)->main_iobase + ADC_QUEUE_HIGH_REG);
+ devpriv->main_iobase + ADC_QUEUE_HIGH_REG);
/* set start channel, and rest of settings */
- writew(bits, priv(dev)->main_iobase + ADC_QUEUE_LOAD_REG);
+ writew(bits, devpriv->main_iobase + ADC_QUEUE_LOAD_REG);
} else {
- uint8_t old_cal_range_bits = priv(dev)->i2c_cal_range_bits;
+ uint8_t old_cal_range_bits = devpriv->i2c_cal_range_bits;
- priv(dev)->i2c_cal_range_bits &= ~ADC_SRC_4020_MASK;
+ devpriv->i2c_cal_range_bits &= ~ADC_SRC_4020_MASK;
if (insn->chanspec & CR_ALT_SOURCE) {
DEBUG_PRINT("reading calibration source\n");
- priv(dev)->i2c_cal_range_bits |=
- adc_src_4020_bits(priv(dev)->calibration_source);
+ devpriv->i2c_cal_range_bits |=
+ adc_src_4020_bits(devpriv->calibration_source);
} else { /* select BNC inputs */
- priv(dev)->i2c_cal_range_bits |= adc_src_4020_bits(4);
+ devpriv->i2c_cal_range_bits |= adc_src_4020_bits(4);
}
/* select range */
if (range == 0)
- priv(dev)->i2c_cal_range_bits |= attenuate_bit(channel);
+ devpriv->i2c_cal_range_bits |= attenuate_bit(channel);
else
- priv(dev)->i2c_cal_range_bits &=
- ~attenuate_bit(channel);
- /* update calibration/range i2c register only if necessary, as it is very slow */
- if (old_cal_range_bits != priv(dev)->i2c_cal_range_bits) {
- uint8_t i2c_data = priv(dev)->i2c_cal_range_bits;
+ devpriv->i2c_cal_range_bits &= ~attenuate_bit(channel);
+ /* update calibration/range i2c register only if necessary,
+ * as it is very slow */
+ if (old_cal_range_bits != devpriv->i2c_cal_range_bits) {
+ uint8_t i2c_data = devpriv->i2c_cal_range_bits;
i2c_write(dev, RANGE_CAL_I2C_ADDR, &i2c_data,
sizeof(i2c_data));
}
- /* 4020 manual asks that sample interval register to be set before writing to convert register.
- * Using somewhat arbitrary setting of 4 master clock ticks = 0.1 usec */
- writew(0,
- priv(dev)->main_iobase + ADC_SAMPLE_INTERVAL_UPPER_REG);
- writew(2,
- priv(dev)->main_iobase + ADC_SAMPLE_INTERVAL_LOWER_REG);
+ /* 4020 manual asks that sample interval register to be set
+ * before writing to convert register.
+ * Using somewhat arbitrary setting of 4 master clock ticks
+ * = 0.1 usec */
+ writew(0, devpriv->main_iobase + ADC_SAMPLE_INTERVAL_UPPER_REG);
+ writew(2, devpriv->main_iobase + ADC_SAMPLE_INTERVAL_LOWER_REG);
}
for (n = 0; n < insn->n; n++) {
/* clear adc buffer (inside loop for 4020 sake) */
- writew(0, priv(dev)->main_iobase + ADC_BUFFER_CLEAR_REG);
+ writew(0, devpriv->main_iobase + ADC_BUFFER_CLEAR_REG);
/* trigger conversion, bits sent only matter for 4020 */
writew(adc_convert_chan_4020_bits(CR_CHAN(insn->chanspec)),
- priv(dev)->main_iobase + ADC_CONVERT_REG);
+ devpriv->main_iobase + ADC_CONVERT_REG);
/* wait for data */
for (i = 0; i < timeout; i++) {
- bits = readw(priv(dev)->main_iobase + HW_STATUS_REG);
+ bits = readw(devpriv->main_iobase + HW_STATUS_REG);
DEBUG_PRINT(" pipe bits 0x%x\n", pipe_full_bits(bits));
- if (board(dev)->layout == LAYOUT_4020) {
- if (readw(priv(dev)->main_iobase +
+ if (thisboard->layout == LAYOUT_4020) {
+ if (readw(devpriv->main_iobase +
ADC_WRITE_PNTR_REG))
break;
} else {
@@ -1977,16 +1864,14 @@
DEBUG_PRINT(" looped %i times waiting for data\n", i);
if (i == timeout) {
comedi_error(dev, " analog input read insn timed out");
- printk(" status 0x%x\n", bits);
+ dev_info(dev->class_dev, "status 0x%x\n", bits);
return -ETIME;
}
- if (board(dev)->layout == LAYOUT_4020)
- data[n] =
- readl(priv(dev)->dio_counter_iobase +
- ADC_FIFO_REG) & 0xffff;
+ if (thisboard->layout == LAYOUT_4020)
+ data[n] = readl(devpriv->dio_counter_iobase +
+ ADC_FIFO_REG) & 0xffff;
else
- data[n] =
- readw(priv(dev)->main_iobase + PIPE1_READ_REG);
+ data[n] = readw(devpriv->main_iobase + PIPE1_READ_REG);
}
return n;
@@ -1995,10 +1880,12 @@
static int ai_config_calibration_source(struct comedi_device *dev,
unsigned int *data)
{
+ const struct pcidas64_board *thisboard = comedi_board(dev);
+ struct pcidas64_private *devpriv = dev->private;
unsigned int source = data[1];
int num_calibration_sources;
- if (board(dev)->layout == LAYOUT_60XX)
+ if (thisboard->layout == LAYOUT_60XX)
num_calibration_sources = 16;
else
num_calibration_sources = 8;
@@ -2009,23 +1896,24 @@
}
DEBUG_PRINT("setting calibration source to %i\n", source);
- priv(dev)->calibration_source = source;
+ devpriv->calibration_source = source;
return 2;
}
static int ai_config_block_size(struct comedi_device *dev, unsigned int *data)
{
+ const struct pcidas64_board *thisboard = comedi_board(dev);
int fifo_size;
- const struct hw_fifo_info *const fifo = board(dev)->ai_fifo;
+ const struct hw_fifo_info *const fifo = thisboard->ai_fifo;
unsigned int block_size, requested_block_size;
int retval;
requested_block_size = data[1];
if (requested_block_size) {
- fifo_size =
- requested_block_size * fifo->num_segments / bytes_in_sample;
+ fifo_size = requested_block_size * fifo->num_segments /
+ bytes_in_sample;
retval = set_ai_fifo_size(dev, fifo_size);
if (retval < 0)
@@ -2043,6 +1931,7 @@
static int ai_config_master_clock_4020(struct comedi_device *dev,
unsigned int *data)
{
+ struct pcidas64_private *devpriv = dev->private;
unsigned int divisor = data[4];
int retval = 0;
@@ -2053,8 +1942,8 @@
switch (data[1]) {
case COMEDI_EV_SCAN_BEGIN:
- priv(dev)->ext_clock.divisor = divisor;
- priv(dev)->ext_clock.chanspec = data[2];
+ devpriv->ext_clock.divisor = divisor;
+ devpriv->ext_clock.chanspec = data[2];
break;
default:
return -EINVAL;
@@ -2069,8 +1958,9 @@
/* XXX could add support for 60xx series */
static int ai_config_master_clock(struct comedi_device *dev, unsigned int *data)
{
+ const struct pcidas64_board *thisboard = comedi_board(dev);
- switch (board(dev)->layout) {
+ switch (thisboard->layout) {
case LAYOUT_4020:
return ai_config_master_clock_4020(dev, data);
break;
@@ -2104,9 +1994,84 @@
return -EINVAL;
}
+/* Gets nearest achievable timing given master clock speed, does not
+ * take into account possible minimum/maximum divisor values. Used
+ * by other timing checking functions. */
+static unsigned int get_divisor(unsigned int ns, unsigned int flags)
+{
+ unsigned int divisor;
+
+ switch (flags & TRIG_ROUND_MASK) {
+ case TRIG_ROUND_UP:
+ divisor = (ns + TIMER_BASE - 1) / TIMER_BASE;
+ break;
+ case TRIG_ROUND_DOWN:
+ divisor = ns / TIMER_BASE;
+ break;
+ case TRIG_ROUND_NEAREST:
+ default:
+ divisor = (ns + TIMER_BASE / 2) / TIMER_BASE;
+ break;
+ }
+ return divisor;
+}
+
+/* utility function that rounds desired timing to an achievable time, and
+ * sets cmd members appropriately.
+ * adc paces conversions from master clock by dividing by (x + 3) where x is 24 bit number
+ */
+static void check_adc_timing(struct comedi_device *dev, struct comedi_cmd *cmd)
+{
+ const struct pcidas64_board *thisboard = comedi_board(dev);
+ unsigned int convert_divisor = 0, scan_divisor;
+ static const int min_convert_divisor = 3;
+ static const int max_convert_divisor =
+ max_counter_value + min_convert_divisor;
+ static const int min_scan_divisor_4020 = 2;
+ unsigned long long max_scan_divisor, min_scan_divisor;
+
+ if (cmd->convert_src == TRIG_TIMER) {
+ if (thisboard->layout == LAYOUT_4020) {
+ cmd->convert_arg = 0;
+ } else {
+ convert_divisor = get_divisor(cmd->convert_arg,
+ cmd->flags);
+ if (convert_divisor > max_convert_divisor)
+ convert_divisor = max_convert_divisor;
+ if (convert_divisor < min_convert_divisor)
+ convert_divisor = min_convert_divisor;
+ cmd->convert_arg = convert_divisor * TIMER_BASE;
+ }
+ } else if (cmd->convert_src == TRIG_NOW) {
+ cmd->convert_arg = 0;
+ }
+
+ if (cmd->scan_begin_src == TRIG_TIMER) {
+ scan_divisor = get_divisor(cmd->scan_begin_arg, cmd->flags);
+ if (cmd->convert_src == TRIG_TIMER) {
+ /* XXX check for integer overflows */
+ min_scan_divisor = convert_divisor * cmd->chanlist_len;
+ max_scan_divisor =
+ (convert_divisor * cmd->chanlist_len - 1) +
+ max_counter_value;
+ } else {
+ min_scan_divisor = min_scan_divisor_4020;
+ max_scan_divisor = max_counter_value + min_scan_divisor;
+ }
+ if (scan_divisor > max_scan_divisor)
+ scan_divisor = max_scan_divisor;
+ if (scan_divisor < min_scan_divisor)
+ scan_divisor = min_scan_divisor;
+ cmd->scan_begin_arg = scan_divisor * TIMER_BASE;
+ }
+
+ return;
+}
+
static int ai_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s,
struct comedi_cmd *cmd)
{
+ const struct pcidas64_board *thisboard = comedi_board(dev);
int err = 0;
unsigned int tmp_arg, tmp_arg2;
int i;
@@ -2118,22 +2083,21 @@
err |= cfc_check_trigger_src(&cmd->start_src, TRIG_NOW | TRIG_EXT);
triggers = TRIG_TIMER;
- if (board(dev)->layout == LAYOUT_4020)
+ if (thisboard->layout == LAYOUT_4020)
triggers |= TRIG_OTHER;
else
triggers |= TRIG_FOLLOW;
err |= cfc_check_trigger_src(&cmd->scan_begin_src, triggers);
triggers = TRIG_TIMER;
- if (board(dev)->layout == LAYOUT_4020)
+ if (thisboard->layout == LAYOUT_4020)
triggers |= TRIG_NOW;
else
triggers |= TRIG_EXT;
err |= cfc_check_trigger_src(&cmd->convert_src, triggers);
-
err |= cfc_check_trigger_src(&cmd->scan_end_src, TRIG_COUNT);
err |= cfc_check_trigger_src(&cmd->stop_src,
- TRIG_COUNT | TRIG_EXT | TRIG_NONE);
+ TRIG_COUNT | TRIG_EXT | TRIG_NONE);
if (err)
return 1;
@@ -2156,55 +2120,34 @@
if (err)
return 2;
- /* step 3: make sure arguments are trivially compatible */
+ /* Step 3: check if arguments are trivially valid */
if (cmd->convert_src == TRIG_TIMER) {
- if (board(dev)->layout == LAYOUT_4020) {
- if (cmd->convert_arg) {
- cmd->convert_arg = 0;
- err++;
- }
+ if (thisboard->layout == LAYOUT_4020) {
+ err |= cfc_check_trigger_arg_is(&cmd->convert_arg, 0);
} else {
- if (cmd->convert_arg < board(dev)->ai_speed) {
- cmd->convert_arg = board(dev)->ai_speed;
- err++;
- }
- if (cmd->scan_begin_src == TRIG_TIMER) {
- /* if scans are timed faster than conversion rate allows */
- if (cmd->convert_arg * cmd->chanlist_len >
- cmd->scan_begin_arg) {
- cmd->scan_begin_arg =
- cmd->convert_arg *
- cmd->chanlist_len;
- err++;
- }
- }
+ err |= cfc_check_trigger_arg_min(&cmd->convert_arg,
+ thisboard->ai_speed);
+ /* if scans are timed faster than conversion rate allows */
+ if (cmd->scan_begin_src == TRIG_TIMER)
+ err |= cfc_check_trigger_arg_min(
+ &cmd->scan_begin_arg,
+ cmd->convert_arg *
+ cmd->chanlist_len);
}
}
- if (!cmd->chanlist_len) {
- cmd->chanlist_len = 1;
- err++;
- }
- if (cmd->scan_end_arg != cmd->chanlist_len) {
- cmd->scan_end_arg = cmd->chanlist_len;
- err++;
- }
+ err |= cfc_check_trigger_arg_min(&cmd->chanlist_len, 1);
+ err |= cfc_check_trigger_arg_is(&cmd->scan_end_arg, cmd->chanlist_len);
switch (cmd->stop_src) {
case TRIG_EXT:
break;
case TRIG_COUNT:
- if (!cmd->stop_arg) {
- cmd->stop_arg = 1;
- err++;
- }
+ err |= cfc_check_trigger_arg_min(&cmd->stop_arg, 1);
break;
case TRIG_NONE:
- if (cmd->stop_arg != 0) {
- cmd->stop_arg = 0;
- err++;
- }
+ err |= cfc_check_trigger_arg_is(&cmd->stop_arg, 0);
break;
default:
break;
@@ -2240,7 +2183,7 @@
}
}
/* check 4020 chanlist */
- if (board(dev)->layout == LAYOUT_4020) {
+ if (thisboard->layout == LAYOUT_4020) {
unsigned int first_channel = CR_CHAN(cmd->chanlist[0]);
for (i = 1; i < cmd->chanlist_len; i++) {
if (CR_CHAN(cmd->chanlist[i]) !=
@@ -2279,89 +2222,37 @@
static void setup_sample_counters(struct comedi_device *dev,
struct comedi_cmd *cmd)
{
+ struct pcidas64_private *devpriv = dev->private;
+
if (cmd->stop_src == TRIG_COUNT) {
/* set software count */
- priv(dev)->ai_count = cmd->stop_arg * cmd->chanlist_len;
+ devpriv->ai_count = cmd->stop_arg * cmd->chanlist_len;
}
/* load hardware conversion counter */
if (use_hw_sample_counter(cmd)) {
writew(cmd->stop_arg & 0xffff,
- priv(dev)->main_iobase + ADC_COUNT_LOWER_REG);
+ devpriv->main_iobase + ADC_COUNT_LOWER_REG);
writew((cmd->stop_arg >> 16) & 0xff,
- priv(dev)->main_iobase + ADC_COUNT_UPPER_REG);
+ devpriv->main_iobase + ADC_COUNT_UPPER_REG);
} else {
- writew(1, priv(dev)->main_iobase + ADC_COUNT_LOWER_REG);
+ writew(1, devpriv->main_iobase + ADC_COUNT_LOWER_REG);
}
}
static inline unsigned int dma_transfer_size(struct comedi_device *dev)
{
+ const struct pcidas64_board *thisboard = comedi_board(dev);
+ struct pcidas64_private *devpriv = dev->private;
unsigned int num_samples;
- num_samples =
- priv(dev)->ai_fifo_segment_length *
- board(dev)->ai_fifo->sample_packing_ratio;
+ num_samples = devpriv->ai_fifo_segment_length *
+ thisboard->ai_fifo->sample_packing_ratio;
if (num_samples > DMA_BUFFER_SIZE / sizeof(uint16_t))
num_samples = DMA_BUFFER_SIZE / sizeof(uint16_t);
return num_samples;
}
-static void disable_ai_pacing(struct comedi_device *dev)
-{
- unsigned long flags;
-
- disable_ai_interrupts(dev);
-
- spin_lock_irqsave(&dev->spinlock, flags);
- priv(dev)->adc_control1_bits &= ~ADC_SW_GATE_BIT;
- writew(priv(dev)->adc_control1_bits,
- priv(dev)->main_iobase + ADC_CONTROL1_REG);
- spin_unlock_irqrestore(&dev->spinlock, flags);
-
- /* disable pacing, triggering, etc */
- writew(ADC_DMA_DISABLE_BIT | ADC_SOFT_GATE_BITS | ADC_GATE_LEVEL_BIT,
- priv(dev)->main_iobase + ADC_CONTROL0_REG);
-}
-
-static void disable_ai_interrupts(struct comedi_device *dev)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&dev->spinlock, flags);
- priv(dev)->intr_enable_bits &=
- ~EN_ADC_INTR_SRC_BIT & ~EN_ADC_DONE_INTR_BIT &
- ~EN_ADC_ACTIVE_INTR_BIT & ~EN_ADC_STOP_INTR_BIT &
- ~EN_ADC_OVERRUN_BIT & ~ADC_INTR_SRC_MASK;
- writew(priv(dev)->intr_enable_bits,
- priv(dev)->main_iobase + INTR_ENABLE_REG);
- spin_unlock_irqrestore(&dev->spinlock, flags);
-
- DEBUG_PRINT("intr enable bits 0x%x\n", priv(dev)->intr_enable_bits);
-}
-
-static void enable_ai_interrupts(struct comedi_device *dev,
- const struct comedi_cmd *cmd)
-{
- uint32_t bits;
- unsigned long flags;
-
- bits = EN_ADC_OVERRUN_BIT | EN_ADC_DONE_INTR_BIT |
- EN_ADC_ACTIVE_INTR_BIT | EN_ADC_STOP_INTR_BIT;
- /* Use pio transfer and interrupt on end of conversion if TRIG_WAKE_EOS flag is set. */
- if (cmd->flags & TRIG_WAKE_EOS) {
- /* 4020 doesn't support pio transfers except for fifo dregs */
- if (board(dev)->layout != LAYOUT_4020)
- bits |= ADC_INTR_EOSCAN_BITS | EN_ADC_INTR_SRC_BIT;
- }
- spin_lock_irqsave(&dev->spinlock, flags);
- priv(dev)->intr_enable_bits |= bits;
- writew(priv(dev)->intr_enable_bits,
- priv(dev)->main_iobase + INTR_ENABLE_REG);
- DEBUG_PRINT("intr enable bits 0x%x\n", priv(dev)->intr_enable_bits);
- spin_unlock_irqrestore(&dev->spinlock, flags);
-}
-
static uint32_t ai_convert_counter_6xxx(const struct comedi_device *dev,
const struct comedi_cmd *cmd)
{
@@ -2373,12 +2264,13 @@
struct comedi_cmd *cmd)
{
uint32_t count;
+
/* figure out how long we need to delay at end of scan */
switch (cmd->scan_begin_src) {
case TRIG_TIMER:
count = (cmd->scan_begin_arg -
- (cmd->convert_arg * (cmd->chanlist_len - 1)))
- / TIMER_BASE;
+ (cmd->convert_arg * (cmd->chanlist_len - 1))) /
+ TIMER_BASE;
break;
case TRIG_FOLLOW:
count = cmd->convert_arg / TIMER_BASE;
@@ -2393,6 +2285,7 @@
static uint32_t ai_convert_counter_4020(struct comedi_device *dev,
struct comedi_cmd *cmd)
{
+ struct pcidas64_private *devpriv = dev->private;
unsigned int divisor;
switch (cmd->scan_begin_src) {
@@ -2400,7 +2293,7 @@
divisor = cmd->scan_begin_arg / TIMER_BASE;
break;
case TRIG_OTHER:
- divisor = priv(dev)->ext_clock.divisor;
+ divisor = devpriv->ext_clock.divisor;
break;
default: /* should never happen */
comedi_error(dev, "bug! failed to set ai pacing!");
@@ -2415,26 +2308,30 @@
static void select_master_clock_4020(struct comedi_device *dev,
const struct comedi_cmd *cmd)
{
+ struct pcidas64_private *devpriv = dev->private;
+
/* select internal/external master clock */
- priv(dev)->hw_config_bits &= ~MASTER_CLOCK_4020_MASK;
+ devpriv->hw_config_bits &= ~MASTER_CLOCK_4020_MASK;
if (cmd->scan_begin_src == TRIG_OTHER) {
- int chanspec = priv(dev)->ext_clock.chanspec;
+ int chanspec = devpriv->ext_clock.chanspec;
if (CR_CHAN(chanspec))
- priv(dev)->hw_config_bits |= BNC_CLOCK_4020_BITS;
+ devpriv->hw_config_bits |= BNC_CLOCK_4020_BITS;
else
- priv(dev)->hw_config_bits |= EXT_CLOCK_4020_BITS;
+ devpriv->hw_config_bits |= EXT_CLOCK_4020_BITS;
} else {
- priv(dev)->hw_config_bits |= INTERNAL_CLOCK_4020_BITS;
+ devpriv->hw_config_bits |= INTERNAL_CLOCK_4020_BITS;
}
- writew(priv(dev)->hw_config_bits,
- priv(dev)->main_iobase + HW_CONFIG_REG);
+ writew(devpriv->hw_config_bits,
+ devpriv->main_iobase + HW_CONFIG_REG);
}
static void select_master_clock(struct comedi_device *dev,
const struct comedi_cmd *cmd)
{
- switch (board(dev)->layout) {
+ const struct pcidas64_board *thisboard = comedi_board(dev);
+
+ switch (thisboard->layout) {
case LAYOUT_4020:
select_master_clock_4020(dev, cmd);
break;
@@ -2446,6 +2343,7 @@
static inline void dma_start_sync(struct comedi_device *dev,
unsigned int channel)
{
+ struct pcidas64_private *devpriv = dev->private;
unsigned long flags;
/* spinlock for plx dma control/status reg */
@@ -2453,23 +2351,25 @@
if (channel)
writeb(PLX_DMA_EN_BIT | PLX_DMA_START_BIT |
PLX_CLEAR_DMA_INTR_BIT,
- priv(dev)->plx9080_iobase + PLX_DMA1_CS_REG);
+ devpriv->plx9080_iobase + PLX_DMA1_CS_REG);
else
writeb(PLX_DMA_EN_BIT | PLX_DMA_START_BIT |
PLX_CLEAR_DMA_INTR_BIT,
- priv(dev)->plx9080_iobase + PLX_DMA0_CS_REG);
+ devpriv->plx9080_iobase + PLX_DMA0_CS_REG);
spin_unlock_irqrestore(&dev->spinlock, flags);
}
static void set_ai_pacing(struct comedi_device *dev, struct comedi_cmd *cmd)
{
+ const struct pcidas64_board *thisboard = comedi_board(dev);
+ struct pcidas64_private *devpriv = dev->private;
uint32_t convert_counter = 0, scan_counter = 0;
check_adc_timing(dev, cmd);
select_master_clock(dev, cmd);
- if (board(dev)->layout == LAYOUT_4020) {
+ if (thisboard->layout == LAYOUT_4020) {
convert_counter = ai_convert_counter_4020(dev, cmd);
} else {
convert_counter = ai_convert_counter_6xxx(dev, cmd);
@@ -2478,23 +2378,24 @@
/* load lower 16 bits of convert interval */
writew(convert_counter & 0xffff,
- priv(dev)->main_iobase + ADC_SAMPLE_INTERVAL_LOWER_REG);
+ devpriv->main_iobase + ADC_SAMPLE_INTERVAL_LOWER_REG);
DEBUG_PRINT("convert counter 0x%x\n", convert_counter);
/* load upper 8 bits of convert interval */
writew((convert_counter >> 16) & 0xff,
- priv(dev)->main_iobase + ADC_SAMPLE_INTERVAL_UPPER_REG);
+ devpriv->main_iobase + ADC_SAMPLE_INTERVAL_UPPER_REG);
/* load lower 16 bits of scan delay */
writew(scan_counter & 0xffff,
- priv(dev)->main_iobase + ADC_DELAY_INTERVAL_LOWER_REG);
+ devpriv->main_iobase + ADC_DELAY_INTERVAL_LOWER_REG);
/* load upper 8 bits of scan delay */
writew((scan_counter >> 16) & 0xff,
- priv(dev)->main_iobase + ADC_DELAY_INTERVAL_UPPER_REG);
+ devpriv->main_iobase + ADC_DELAY_INTERVAL_UPPER_REG);
DEBUG_PRINT("scan counter 0x%x\n", scan_counter);
}
static int use_internal_queue_6xxx(const struct comedi_cmd *cmd)
{
int i;
+
for (i = 0; i + 1 < cmd->chanlist_len; i++) {
if (CR_CHAN(cmd->chanlist[i + 1]) !=
CR_CHAN(cmd->chanlist[i]) + 1)
@@ -2511,14 +2412,16 @@
static int setup_channel_queue(struct comedi_device *dev,
const struct comedi_cmd *cmd)
{
+ const struct pcidas64_board *thisboard = comedi_board(dev);
+ struct pcidas64_private *devpriv = dev->private;
unsigned short bits;
int i;
- if (board(dev)->layout != LAYOUT_4020) {
+ if (thisboard->layout != LAYOUT_4020) {
if (use_internal_queue_6xxx(cmd)) {
- priv(dev)->hw_config_bits &= ~EXT_QUEUE_BIT;
- writew(priv(dev)->hw_config_bits,
- priv(dev)->main_iobase + HW_CONFIG_REG);
+ devpriv->hw_config_bits &= ~EXT_QUEUE_BIT;
+ writew(devpriv->hw_config_bits,
+ devpriv->main_iobase + HW_CONFIG_REG);
bits = 0;
/* set channel */
bits |= adc_chan_bits(CR_CHAN(cmd->chanlist[0]));
@@ -2534,30 +2437,30 @@
/* set stop channel */
writew(adc_chan_bits
(CR_CHAN(cmd->chanlist[cmd->chanlist_len - 1])),
- priv(dev)->main_iobase + ADC_QUEUE_HIGH_REG);
+ devpriv->main_iobase + ADC_QUEUE_HIGH_REG);
/* set start channel, and rest of settings */
writew(bits,
- priv(dev)->main_iobase + ADC_QUEUE_LOAD_REG);
+ devpriv->main_iobase + ADC_QUEUE_LOAD_REG);
} else {
/* use external queue */
if (dev->write_subdev && dev->write_subdev->busy) {
warn_external_queue(dev);
return -EBUSY;
}
- priv(dev)->hw_config_bits |= EXT_QUEUE_BIT;
- writew(priv(dev)->hw_config_bits,
- priv(dev)->main_iobase + HW_CONFIG_REG);
+ devpriv->hw_config_bits |= EXT_QUEUE_BIT;
+ writew(devpriv->hw_config_bits,
+ devpriv->main_iobase + HW_CONFIG_REG);
/* clear DAC buffer to prevent weird interactions */
writew(0,
- priv(dev)->main_iobase + DAC_BUFFER_CLEAR_REG);
+ devpriv->main_iobase + DAC_BUFFER_CLEAR_REG);
/* clear queue pointer */
- writew(0, priv(dev)->main_iobase + ADC_QUEUE_CLEAR_REG);
+ writew(0, devpriv->main_iobase + ADC_QUEUE_CLEAR_REG);
/* load external queue */
for (i = 0; i < cmd->chanlist_len; i++) {
bits = 0;
/* set channel */
- bits |=
- adc_chan_bits(CR_CHAN(cmd->chanlist[i]));
+ bits |= adc_chan_bits(CR_CHAN(cmd->
+ chanlist[i]));
/* set gain */
bits |= ai_range_bits_6xxx(dev,
CR_RANGE(cmd->
@@ -2573,42 +2476,42 @@
/* mark end of queue */
if (i == cmd->chanlist_len - 1)
bits |= QUEUE_EOSCAN_BIT |
- QUEUE_EOSEQ_BIT;
+ QUEUE_EOSEQ_BIT;
writew(bits,
- priv(dev)->main_iobase +
+ devpriv->main_iobase +
ADC_QUEUE_FIFO_REG);
- DEBUG_PRINT
- ("wrote 0x%x to external channel queue\n",
- bits);
+ DEBUG_PRINT(
+ "wrote 0x%x to external channel queue\n",
+ bits);
}
/* doing a queue clear is not specified in board docs,
* but required for reliable operation */
- writew(0, priv(dev)->main_iobase + ADC_QUEUE_CLEAR_REG);
+ writew(0, devpriv->main_iobase + ADC_QUEUE_CLEAR_REG);
/* prime queue holding register */
- writew(0, priv(dev)->main_iobase + ADC_QUEUE_LOAD_REG);
+ writew(0, devpriv->main_iobase + ADC_QUEUE_LOAD_REG);
}
} else {
- unsigned short old_cal_range_bits =
- priv(dev)->i2c_cal_range_bits;
+ unsigned short old_cal_range_bits = devpriv->i2c_cal_range_bits;
- priv(dev)->i2c_cal_range_bits &= ~ADC_SRC_4020_MASK;
+ devpriv->i2c_cal_range_bits &= ~ADC_SRC_4020_MASK;
/* select BNC inputs */
- priv(dev)->i2c_cal_range_bits |= adc_src_4020_bits(4);
+ devpriv->i2c_cal_range_bits |= adc_src_4020_bits(4);
/* select ranges */
for (i = 0; i < cmd->chanlist_len; i++) {
unsigned int channel = CR_CHAN(cmd->chanlist[i]);
unsigned int range = CR_RANGE(cmd->chanlist[i]);
if (range == 0)
- priv(dev)->i2c_cal_range_bits |=
- attenuate_bit(channel);
+ devpriv->i2c_cal_range_bits |=
+ attenuate_bit(channel);
else
- priv(dev)->i2c_cal_range_bits &=
- ~attenuate_bit(channel);
+ devpriv->i2c_cal_range_bits &=
+ ~attenuate_bit(channel);
}
- /* update calibration/range i2c register only if necessary, as it is very slow */
- if (old_cal_range_bits != priv(dev)->i2c_cal_range_bits) {
- uint8_t i2c_data = priv(dev)->i2c_cal_range_bits;
+ /* update calibration/range i2c register only if necessary,
+ * as it is very slow */
+ if (old_cal_range_bits != devpriv->i2c_cal_range_bits) {
+ uint8_t i2c_data = devpriv->i2c_cal_range_bits;
i2c_write(dev, RANGE_CAL_I2C_ADDR, &i2c_data,
sizeof(i2c_data));
}
@@ -2620,6 +2523,8 @@
unsigned int dma_channel,
unsigned int descriptor_bits)
{
+ struct pcidas64_private *devpriv = dev->private;
+
/* The transfer size, pci address, and local address registers
* are supposedly unused during chained dma,
* but I have found that left over values from last operation
@@ -2627,25 +2532,27 @@
* block. Initializing them to zero seems to fix the problem. */
if (dma_channel) {
writel(0,
- priv(dev)->plx9080_iobase + PLX_DMA1_TRANSFER_SIZE_REG);
- writel(0, priv(dev)->plx9080_iobase + PLX_DMA1_PCI_ADDRESS_REG);
+ devpriv->plx9080_iobase + PLX_DMA1_TRANSFER_SIZE_REG);
+ writel(0, devpriv->plx9080_iobase + PLX_DMA1_PCI_ADDRESS_REG);
writel(0,
- priv(dev)->plx9080_iobase + PLX_DMA1_LOCAL_ADDRESS_REG);
+ devpriv->plx9080_iobase + PLX_DMA1_LOCAL_ADDRESS_REG);
writel(descriptor_bits,
- priv(dev)->plx9080_iobase + PLX_DMA1_DESCRIPTOR_REG);
+ devpriv->plx9080_iobase + PLX_DMA1_DESCRIPTOR_REG);
} else {
writel(0,
- priv(dev)->plx9080_iobase + PLX_DMA0_TRANSFER_SIZE_REG);
- writel(0, priv(dev)->plx9080_iobase + PLX_DMA0_PCI_ADDRESS_REG);
+ devpriv->plx9080_iobase + PLX_DMA0_TRANSFER_SIZE_REG);
+ writel(0, devpriv->plx9080_iobase + PLX_DMA0_PCI_ADDRESS_REG);
writel(0,
- priv(dev)->plx9080_iobase + PLX_DMA0_LOCAL_ADDRESS_REG);
+ devpriv->plx9080_iobase + PLX_DMA0_LOCAL_ADDRESS_REG);
writel(descriptor_bits,
- priv(dev)->plx9080_iobase + PLX_DMA0_DESCRIPTOR_REG);
+ devpriv->plx9080_iobase + PLX_DMA0_DESCRIPTOR_REG);
}
}
static int ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
{
+ const struct pcidas64_board *thisboard = comedi_board(dev);
+ struct pcidas64_private *devpriv = dev->private;
struct comedi_async *async = s->async;
struct comedi_cmd *cmd = &async->cmd;
uint32_t bits;
@@ -2661,7 +2568,7 @@
return retval;
/* make sure internal calibration source is turned off */
- writew(0, priv(dev)->main_iobase + CALIBRATION_REG);
+ writew(0, devpriv->main_iobase + CALIBRATION_REG);
set_ai_pacing(dev, cmd);
@@ -2671,50 +2578,51 @@
spin_lock_irqsave(&dev->spinlock, flags);
/* set mode, allow conversions through software gate */
- priv(dev)->adc_control1_bits |= ADC_SW_GATE_BIT;
- priv(dev)->adc_control1_bits &= ~ADC_DITHER_BIT;
- if (board(dev)->layout != LAYOUT_4020) {
- priv(dev)->adc_control1_bits &= ~ADC_MODE_MASK;
+ devpriv->adc_control1_bits |= ADC_SW_GATE_BIT;
+ devpriv->adc_control1_bits &= ~ADC_DITHER_BIT;
+ if (thisboard->layout != LAYOUT_4020) {
+ devpriv->adc_control1_bits &= ~ADC_MODE_MASK;
if (cmd->convert_src == TRIG_EXT)
- priv(dev)->adc_control1_bits |= adc_mode_bits(13); /* good old mode 13 */
+ /* good old mode 13 */
+ devpriv->adc_control1_bits |= adc_mode_bits(13);
else
- priv(dev)->adc_control1_bits |= adc_mode_bits(8); /* mode 8. What else could you need? */
+ /* mode 8. What else could you need? */
+ devpriv->adc_control1_bits |= adc_mode_bits(8);
} else {
- priv(dev)->adc_control1_bits &= ~CHANNEL_MODE_4020_MASK;
+ devpriv->adc_control1_bits &= ~CHANNEL_MODE_4020_MASK;
if (cmd->chanlist_len == 4)
- priv(dev)->adc_control1_bits |= FOUR_CHANNEL_4020_BITS;
+ devpriv->adc_control1_bits |= FOUR_CHANNEL_4020_BITS;
else if (cmd->chanlist_len == 2)
- priv(dev)->adc_control1_bits |= TWO_CHANNEL_4020_BITS;
- priv(dev)->adc_control1_bits &= ~ADC_LO_CHANNEL_4020_MASK;
- priv(dev)->adc_control1_bits |=
- adc_lo_chan_4020_bits(CR_CHAN(cmd->chanlist[0]));
- priv(dev)->adc_control1_bits &= ~ADC_HI_CHANNEL_4020_MASK;
- priv(dev)->adc_control1_bits |=
- adc_hi_chan_4020_bits(CR_CHAN
- (cmd->
- chanlist[cmd->chanlist_len - 1]));
+ devpriv->adc_control1_bits |= TWO_CHANNEL_4020_BITS;
+ devpriv->adc_control1_bits &= ~ADC_LO_CHANNEL_4020_MASK;
+ devpriv->adc_control1_bits |=
+ adc_lo_chan_4020_bits(CR_CHAN(cmd->chanlist[0]));
+ devpriv->adc_control1_bits &= ~ADC_HI_CHANNEL_4020_MASK;
+ devpriv->adc_control1_bits |=
+ adc_hi_chan_4020_bits(CR_CHAN(cmd->chanlist
+ [cmd->chanlist_len - 1]));
}
- writew(priv(dev)->adc_control1_bits,
- priv(dev)->main_iobase + ADC_CONTROL1_REG);
- DEBUG_PRINT("control1 bits 0x%x\n", priv(dev)->adc_control1_bits);
+ writew(devpriv->adc_control1_bits,
+ devpriv->main_iobase + ADC_CONTROL1_REG);
+ DEBUG_PRINT("control1 bits 0x%x\n", devpriv->adc_control1_bits);
spin_unlock_irqrestore(&dev->spinlock, flags);
/* clear adc buffer */
- writew(0, priv(dev)->main_iobase + ADC_BUFFER_CLEAR_REG);
+ writew(0, devpriv->main_iobase + ADC_BUFFER_CLEAR_REG);
if ((cmd->flags & TRIG_WAKE_EOS) == 0 ||
- board(dev)->layout == LAYOUT_4020) {
- priv(dev)->ai_dma_index = 0;
+ thisboard->layout == LAYOUT_4020) {
+ devpriv->ai_dma_index = 0;
/* set dma transfer size */
- for (i = 0; i < ai_dma_ring_count(board(dev)); i++)
- priv(dev)->ai_dma_desc[i].transfer_size =
- cpu_to_le32(dma_transfer_size(dev) *
- sizeof(uint16_t));
+ for (i = 0; i < ai_dma_ring_count(thisboard); i++)
+ devpriv->ai_dma_desc[i].transfer_size =
+ cpu_to_le32(dma_transfer_size(dev) *
+ sizeof(uint16_t));
/* give location of first dma descriptor */
load_first_dma_descriptor(dev, 1,
- priv(dev)->ai_dma_desc_bus_addr |
+ devpriv->ai_dma_desc_bus_addr |
PLX_DESC_IN_PCI_BIT |
PLX_INTR_TERM_COUNT |
PLX_XFER_LOCAL_TO_PCI);
@@ -2722,14 +2630,14 @@
dma_start_sync(dev, 1);
}
- if (board(dev)->layout == LAYOUT_4020) {
+ if (thisboard->layout == LAYOUT_4020) {
/* set source for external triggers */
bits = 0;
if (cmd->start_src == TRIG_EXT && CR_CHAN(cmd->start_arg))
bits |= EXT_START_TRIG_BNC_BIT;
if (cmd->stop_src == TRIG_EXT && CR_CHAN(cmd->stop_arg))
bits |= EXT_STOP_TRIG_BNC_BIT;
- writew(bits, priv(dev)->main_iobase + DAQ_ATRIG_LOW_4020_REG);
+ writew(bits, devpriv->main_iobase + DAQ_ATRIG_LOW_4020_REG);
}
spin_lock_irqsave(&dev->spinlock, flags);
@@ -2747,16 +2655,16 @@
bits |= ADC_START_TRIG_SOFT_BITS;
if (use_hw_sample_counter(cmd))
bits |= ADC_SAMPLE_COUNTER_EN_BIT;
- writew(bits, priv(dev)->main_iobase + ADC_CONTROL0_REG);
+ writew(bits, devpriv->main_iobase + ADC_CONTROL0_REG);
DEBUG_PRINT("control0 bits 0x%x\n", bits);
- priv(dev)->ai_cmd_running = 1;
+ devpriv->ai_cmd_running = 1;
spin_unlock_irqrestore(&dev->spinlock, flags);
/* start acquisition */
if (cmd->start_src == TRIG_NOW) {
- writew(0, priv(dev)->main_iobase + ADC_START_REG);
+ writew(0, devpriv->main_iobase + ADC_START_REG);
DEBUG_PRINT("soft trig\n");
}
@@ -2766,6 +2674,7 @@
/* read num_samples from 16 bit wide ai fifo */
static void pio_drain_ai_fifo_16(struct comedi_device *dev)
{
+ struct pcidas64_private *devpriv = dev->private;
struct comedi_subdevice *s = dev->read_subdev;
struct comedi_async *async = s->async;
struct comedi_cmd *cmd = &async->cmd;
@@ -2776,18 +2685,19 @@
do {
/* get least significant 15 bits */
- read_index =
- readw(priv(dev)->main_iobase + ADC_READ_PNTR_REG) & 0x7fff;
- write_index =
- readw(priv(dev)->main_iobase + ADC_WRITE_PNTR_REG) & 0x7fff;
- /* Get most significant bits (grey code). Different boards use different code
- * so use a scheme that doesn't depend on encoding. This read must
+ read_index = readw(devpriv->main_iobase + ADC_READ_PNTR_REG) &
+ 0x7fff;
+ write_index = readw(devpriv->main_iobase + ADC_WRITE_PNTR_REG) &
+ 0x7fff;
+ /* Get most significant bits (grey code).
+ * Different boards use different code so use a scheme
+ * that doesn't depend on encoding. This read must
* occur after reading least significant 15 bits to avoid race
* with fifo switching to next segment. */
- prepost_bits = readw(priv(dev)->main_iobase + PREPOST_REG);
+ prepost_bits = readw(devpriv->main_iobase + PREPOST_REG);
- /* if read and write pointers are not on the same fifo segment, read to the
- * end of the read segment */
+ /* if read and write pointers are not on the same fifo segment,
+ * read to the end of the read segment */
read_segment = adc_upper_read_ptr_code(prepost_bits);
write_segment = adc_upper_write_ptr_code(prepost_bits);
@@ -2797,17 +2707,17 @@
if (read_segment != write_segment)
num_samples =
- priv(dev)->ai_fifo_segment_length - read_index;
+ devpriv->ai_fifo_segment_length - read_index;
else
num_samples = write_index - read_index;
if (cmd->stop_src == TRIG_COUNT) {
- if (priv(dev)->ai_count == 0)
+ if (devpriv->ai_count == 0)
break;
- if (num_samples > priv(dev)->ai_count)
- num_samples = priv(dev)->ai_count;
+ if (num_samples > devpriv->ai_count)
+ num_samples = devpriv->ai_count;
- priv(dev)->ai_count -= num_samples;
+ devpriv->ai_count -= num_samples;
}
if (num_samples < 0) {
@@ -2820,20 +2730,21 @@
for (i = 0; i < num_samples; i++) {
cfc_write_to_buffer(s,
- readw(priv(dev)->main_iobase +
+ readw(devpriv->main_iobase +
ADC_FIFO_REG));
}
} while (read_segment != write_segment);
}
-/* Read from 32 bit wide ai fifo of 4020 - deal with insane grey coding of pointers.
- * The pci-4020 hardware only supports
- * dma transfers (it only supports the use of pio for draining the last remaining
- * points from the fifo when a data acquisition operation has completed).
+/* Read from 32 bit wide ai fifo of 4020 - deal with insane grey coding of
+ * pointers. The pci-4020 hardware only supports dma transfers (it only
+ * supports the use of pio for draining the last remaining points from the
+ * fifo when a data acquisition operation has completed).
*/
static void pio_drain_ai_fifo_32(struct comedi_device *dev)
{
+ struct pcidas64_private *devpriv = dev->private;
struct comedi_subdevice *s = dev->read_subdev;
struct comedi_async *async = s->async;
struct comedi_cmd *cmd = &async->cmd;
@@ -2841,33 +2752,35 @@
unsigned int max_transfer = 100000;
uint32_t fifo_data;
int write_code =
- readw(priv(dev)->main_iobase + ADC_WRITE_PNTR_REG) & 0x7fff;
+ readw(devpriv->main_iobase + ADC_WRITE_PNTR_REG) & 0x7fff;
int read_code =
- readw(priv(dev)->main_iobase + ADC_READ_PNTR_REG) & 0x7fff;
+ readw(devpriv->main_iobase + ADC_READ_PNTR_REG) & 0x7fff;
if (cmd->stop_src == TRIG_COUNT) {
- if (max_transfer > priv(dev)->ai_count)
- max_transfer = priv(dev)->ai_count;
+ if (max_transfer > devpriv->ai_count)
+ max_transfer = devpriv->ai_count;
}
for (i = 0; read_code != write_code && i < max_transfer;) {
- fifo_data = readl(priv(dev)->dio_counter_iobase + ADC_FIFO_REG);
+ fifo_data = readl(devpriv->dio_counter_iobase + ADC_FIFO_REG);
cfc_write_to_buffer(s, fifo_data & 0xffff);
i++;
if (i < max_transfer) {
cfc_write_to_buffer(s, (fifo_data >> 16) & 0xffff);
i++;
}
- read_code =
- readw(priv(dev)->main_iobase + ADC_READ_PNTR_REG) & 0x7fff;
+ read_code = readw(devpriv->main_iobase + ADC_READ_PNTR_REG) &
+ 0x7fff;
}
- priv(dev)->ai_count -= i;
+ devpriv->ai_count -= i;
}
/* empty fifo */
static void pio_drain_ai_fifo(struct comedi_device *dev)
{
- if (board(dev)->layout == LAYOUT_4020)
+ const struct pcidas64_board *thisboard = comedi_board(dev);
+
+ if (thisboard->layout == LAYOUT_4020)
pio_drain_ai_fifo_32(dev);
else
pio_drain_ai_fifo_16(dev);
@@ -2875,6 +2788,8 @@
static void drain_dma_buffers(struct comedi_device *dev, unsigned int channel)
{
+ const struct pcidas64_board *thisboard = comedi_board(dev);
+ struct pcidas64_private *devpriv = dev->private;
struct comedi_async *async = dev->read_subdev->async;
uint32_t next_transfer_addr;
int j;
@@ -2883,46 +2798,47 @@
if (channel)
pci_addr_reg =
- priv(dev)->plx9080_iobase + PLX_DMA1_PCI_ADDRESS_REG;
+ devpriv->plx9080_iobase + PLX_DMA1_PCI_ADDRESS_REG;
else
pci_addr_reg =
- priv(dev)->plx9080_iobase + PLX_DMA0_PCI_ADDRESS_REG;
+ devpriv->plx9080_iobase + PLX_DMA0_PCI_ADDRESS_REG;
/* loop until we have read all the full buffers */
for (j = 0, next_transfer_addr = readl(pci_addr_reg);
(next_transfer_addr <
- priv(dev)->ai_buffer_bus_addr[priv(dev)->ai_dma_index]
- || next_transfer_addr >=
- priv(dev)->ai_buffer_bus_addr[priv(dev)->ai_dma_index] +
- DMA_BUFFER_SIZE) && j < ai_dma_ring_count(board(dev)); j++) {
+ devpriv->ai_buffer_bus_addr[devpriv->ai_dma_index] ||
+ next_transfer_addr >=
+ devpriv->ai_buffer_bus_addr[devpriv->ai_dma_index] +
+ DMA_BUFFER_SIZE) && j < ai_dma_ring_count(thisboard); j++) {
/* transfer data from dma buffer to comedi buffer */
num_samples = dma_transfer_size(dev);
if (async->cmd.stop_src == TRIG_COUNT) {
- if (num_samples > priv(dev)->ai_count)
- num_samples = priv(dev)->ai_count;
- priv(dev)->ai_count -= num_samples;
+ if (num_samples > devpriv->ai_count)
+ num_samples = devpriv->ai_count;
+ devpriv->ai_count -= num_samples;
}
cfc_write_array_to_buffer(dev->read_subdev,
- priv(dev)->ai_buffer[priv(dev)->
- ai_dma_index],
+ devpriv->ai_buffer[devpriv->
+ ai_dma_index],
num_samples * sizeof(uint16_t));
- priv(dev)->ai_dma_index =
- (priv(dev)->ai_dma_index +
- 1) % ai_dma_ring_count(board(dev));
+ devpriv->ai_dma_index = (devpriv->ai_dma_index + 1) %
+ ai_dma_ring_count(thisboard);
DEBUG_PRINT("next buffer addr 0x%lx\n",
- (unsigned long)priv(dev)->
- ai_buffer_bus_addr[priv(dev)->ai_dma_index]);
+ (unsigned long)devpriv->
+ ai_buffer_bus_addr[devpriv->ai_dma_index]);
DEBUG_PRINT("pci addr reg 0x%x\n", next_transfer_addr);
}
- /* XXX check for dma ring buffer overrun (use end-of-chain bit to mark last
- * unused buffer) */
+ /* XXX check for dma ring buffer overrun
+ * (use end-of-chain bit to mark last unused buffer) */
}
static void handle_ai_interrupt(struct comedi_device *dev,
unsigned short status,
unsigned int plx_status)
{
+ const struct pcidas64_board *thisboard = comedi_board(dev);
+ struct pcidas64_private *devpriv = dev->private;
struct comedi_subdevice *s = dev->read_subdev;
struct comedi_async *async = s->async;
struct comedi_cmd *cmd = &async->cmd;
@@ -2936,10 +2852,10 @@
}
/* spin lock makes sure no one else changes plx dma control reg */
spin_lock_irqsave(&dev->spinlock, flags);
- dma1_status = readb(priv(dev)->plx9080_iobase + PLX_DMA1_CS_REG);
+ dma1_status = readb(devpriv->plx9080_iobase + PLX_DMA1_CS_REG);
if (plx_status & ICS_DMA1_A) { /* dma chan 1 interrupt */
writeb((dma1_status & PLX_DMA_EN_BIT) | PLX_CLEAR_DMA_INTR_BIT,
- priv(dev)->plx9080_iobase + PLX_DMA1_CS_REG);
+ devpriv->plx9080_iobase + PLX_DMA1_CS_REG);
DEBUG_PRINT("dma1 status 0x%x\n", dma1_status);
if (dma1_status & PLX_DMA_EN_BIT)
@@ -2956,17 +2872,17 @@
if ((status & ADC_DONE_BIT) ||
((cmd->flags & TRIG_WAKE_EOS) &&
(status & ADC_INTR_PENDING_BIT) &&
- (board(dev)->layout != LAYOUT_4020))) {
+ (thisboard->layout != LAYOUT_4020))) {
DEBUG_PRINT("pio fifo drain\n");
spin_lock_irqsave(&dev->spinlock, flags);
- if (priv(dev)->ai_cmd_running) {
+ if (devpriv->ai_cmd_running) {
spin_unlock_irqrestore(&dev->spinlock, flags);
pio_drain_ai_fifo(dev);
} else
spin_unlock_irqrestore(&dev->spinlock, flags);
}
/* if we are have all the data, then quit */
- if ((cmd->stop_src == TRIG_COUNT && (int)priv(dev)->ai_count <= 0) ||
+ if ((cmd->stop_src == TRIG_COUNT && (int)devpriv->ai_count <= 0) ||
(cmd->stop_src == TRIG_EXT && (status & ADC_STOP_BIT))) {
async->events |= COMEDI_CB_EOA;
}
@@ -2976,29 +2892,31 @@
static inline unsigned int prev_ao_dma_index(struct comedi_device *dev)
{
+ struct pcidas64_private *devpriv = dev->private;
unsigned int buffer_index;
- if (priv(dev)->ao_dma_index == 0)
+ if (devpriv->ao_dma_index == 0)
buffer_index = AO_DMA_RING_COUNT - 1;
else
- buffer_index = priv(dev)->ao_dma_index - 1;
+ buffer_index = devpriv->ao_dma_index - 1;
return buffer_index;
}
static int last_ao_dma_load_completed(struct comedi_device *dev)
{
+ struct pcidas64_private *devpriv = dev->private;
unsigned int buffer_index;
unsigned int transfer_address;
unsigned short dma_status;
buffer_index = prev_ao_dma_index(dev);
- dma_status = readb(priv(dev)->plx9080_iobase + PLX_DMA0_CS_REG);
+ dma_status = readb(devpriv->plx9080_iobase + PLX_DMA0_CS_REG);
if ((dma_status & PLX_DMA_DONE_BIT) == 0)
return 0;
transfer_address =
- readl(priv(dev)->plx9080_iobase + PLX_DMA0_PCI_ADDRESS_REG);
- if (transfer_address != priv(dev)->ao_buffer_bus_addr[buffer_index])
+ readl(devpriv->plx9080_iobase + PLX_DMA0_PCI_ADDRESS_REG);
+ if (transfer_address != devpriv->ao_buffer_bus_addr[buffer_index])
return 0;
return 1;
@@ -3007,10 +2925,12 @@
static int ao_stopped_by_error(struct comedi_device *dev,
const struct comedi_cmd *cmd)
{
+ struct pcidas64_private *devpriv = dev->private;
+
if (cmd->stop_src == TRIG_NONE)
return 1;
if (cmd->stop_src == TRIG_COUNT) {
- if (priv(dev)->ao_count)
+ if (devpriv->ao_count)
return 1;
if (last_ao_dma_load_completed(dev) == 0)
return 1;
@@ -3032,10 +2952,11 @@
static void restart_ao_dma(struct comedi_device *dev)
{
+ struct pcidas64_private *devpriv = dev->private;
unsigned int dma_desc_bits;
dma_desc_bits =
- readl(priv(dev)->plx9080_iobase + PLX_DMA0_DESCRIPTOR_REG);
+ readl(devpriv->plx9080_iobase + PLX_DMA0_DESCRIPTOR_REG);
dma_desc_bits &= ~PLX_END_OF_CHAIN_BIT;
DEBUG_PRINT("restarting ao dma, descriptor reg 0x%x\n", dma_desc_bits);
load_first_dma_descriptor(dev, 0, dma_desc_bits);
@@ -3043,9 +2964,81 @@
dma_start_sync(dev, 0);
}
+static unsigned int load_ao_dma_buffer(struct comedi_device *dev,
+ const struct comedi_cmd *cmd)
+{
+ struct pcidas64_private *devpriv = dev->private;
+ unsigned int num_bytes, buffer_index, prev_buffer_index;
+ unsigned int next_bits;
+
+ buffer_index = devpriv->ao_dma_index;
+ prev_buffer_index = prev_ao_dma_index(dev);
+
+ DEBUG_PRINT("attempting to load ao buffer %i (0x%llx)\n", buffer_index,
+ (unsigned long long)devpriv->ao_buffer_bus_addr[
+ buffer_index]);
+
+ num_bytes = comedi_buf_read_n_available(dev->write_subdev->async);
+ if (num_bytes > DMA_BUFFER_SIZE)
+ num_bytes = DMA_BUFFER_SIZE;
+ if (cmd->stop_src == TRIG_COUNT && num_bytes > devpriv->ao_count)
+ num_bytes = devpriv->ao_count;
+ num_bytes -= num_bytes % bytes_in_sample;
+
+ if (num_bytes == 0)
+ return 0;
+
+ DEBUG_PRINT("loading %i bytes\n", num_bytes);
+
+ num_bytes = cfc_read_array_from_buffer(dev->write_subdev,
+ devpriv->
+ ao_buffer[buffer_index],
+ num_bytes);
+ devpriv->ao_dma_desc[buffer_index].transfer_size =
+ cpu_to_le32(num_bytes);
+ /* set end of chain bit so we catch underruns */
+ next_bits = le32_to_cpu(devpriv->ao_dma_desc[buffer_index].next);
+ next_bits |= PLX_END_OF_CHAIN_BIT;
+ devpriv->ao_dma_desc[buffer_index].next = cpu_to_le32(next_bits);
+ /* clear end of chain bit on previous buffer now that we have set it
+ * for the last buffer */
+ next_bits = le32_to_cpu(devpriv->ao_dma_desc[prev_buffer_index].next);
+ next_bits &= ~PLX_END_OF_CHAIN_BIT;
+ devpriv->ao_dma_desc[prev_buffer_index].next = cpu_to_le32(next_bits);
+
+ devpriv->ao_dma_index = (buffer_index + 1) % AO_DMA_RING_COUNT;
+ devpriv->ao_count -= num_bytes;
+
+ return num_bytes;
+}
+
+static void load_ao_dma(struct comedi_device *dev, const struct comedi_cmd *cmd)
+{
+ struct pcidas64_private *devpriv = dev->private;
+ unsigned int num_bytes;
+ unsigned int next_transfer_addr;
+ void __iomem *pci_addr_reg =
+ devpriv->plx9080_iobase + PLX_DMA0_PCI_ADDRESS_REG;
+ unsigned int buffer_index;
+
+ do {
+ buffer_index = devpriv->ao_dma_index;
+ /* don't overwrite data that hasn't been transferred yet */
+ next_transfer_addr = readl(pci_addr_reg);
+ if (next_transfer_addr >=
+ devpriv->ao_buffer_bus_addr[buffer_index] &&
+ next_transfer_addr <
+ devpriv->ao_buffer_bus_addr[buffer_index] +
+ DMA_BUFFER_SIZE)
+ return;
+ num_bytes = load_ao_dma_buffer(dev, cmd);
+ } while (num_bytes >= DMA_BUFFER_SIZE);
+}
+
static void handle_ao_interrupt(struct comedi_device *dev,
unsigned short status, unsigned int plx_status)
{
+ struct pcidas64_private *devpriv = dev->private;
struct comedi_subdevice *s = dev->write_subdev;
struct comedi_async *async;
struct comedi_cmd *cmd;
@@ -3060,15 +3053,15 @@
/* spin lock makes sure no one else changes plx dma control reg */
spin_lock_irqsave(&dev->spinlock, flags);
- dma0_status = readb(priv(dev)->plx9080_iobase + PLX_DMA0_CS_REG);
+ dma0_status = readb(devpriv->plx9080_iobase + PLX_DMA0_CS_REG);
if (plx_status & ICS_DMA0_A) { /* dma chan 0 interrupt */
- if ((dma0_status & PLX_DMA_EN_BIT)
- && !(dma0_status & PLX_DMA_DONE_BIT))
+ if ((dma0_status & PLX_DMA_EN_BIT) &&
+ !(dma0_status & PLX_DMA_DONE_BIT))
writeb(PLX_DMA_EN_BIT | PLX_CLEAR_DMA_INTR_BIT,
- priv(dev)->plx9080_iobase + PLX_DMA0_CS_REG);
+ devpriv->plx9080_iobase + PLX_DMA0_CS_REG);
else
writeb(PLX_CLEAR_DMA_INTR_BIT,
- priv(dev)->plx9080_iobase + PLX_DMA0_CS_REG);
+ devpriv->plx9080_iobase + PLX_DMA0_CS_REG);
spin_unlock_irqrestore(&dev->spinlock, flags);
DEBUG_PRINT("dma0 status 0x%x\n", dma0_status);
if (dma0_status & PLX_DMA_EN_BIT) {
@@ -3078,18 +3071,19 @@
restart_ao_dma(dev);
}
DEBUG_PRINT(" cleared dma ch0 interrupt\n");
- } else
+ } else {
spin_unlock_irqrestore(&dev->spinlock, flags);
+ }
if ((status & DAC_DONE_BIT)) {
async->events |= COMEDI_CB_EOA;
if (ao_stopped_by_error(dev, cmd))
async->events |= COMEDI_CB_ERROR;
DEBUG_PRINT("plx dma0 desc reg 0x%x\n",
- readl(priv(dev)->plx9080_iobase +
+ readl(devpriv->plx9080_iobase +
PLX_DMA0_DESCRIPTOR_REG));
DEBUG_PRINT("plx dma0 address reg 0x%x\n",
- readl(priv(dev)->plx9080_iobase +
+ readl(devpriv->plx9080_iobase +
PLX_DMA0_PCI_ADDRESS_REG));
}
cfc_handle_events(dev, s);
@@ -3098,22 +3092,21 @@
static irqreturn_t handle_interrupt(int irq, void *d)
{
struct comedi_device *dev = d;
+ struct pcidas64_private *devpriv = dev->private;
unsigned short status;
uint32_t plx_status;
uint32_t plx_bits;
- plx_status = readl(priv(dev)->plx9080_iobase + PLX_INTRCS_REG);
- status = readw(priv(dev)->main_iobase + HW_STATUS_REG);
+ plx_status = readl(devpriv->plx9080_iobase + PLX_INTRCS_REG);
+ status = readw(devpriv->main_iobase + HW_STATUS_REG);
- DEBUG_PRINT("cb_pcidas64: hw status 0x%x ", status);
- DEBUG_PRINT("plx status 0x%x\n", plx_status);
+ DEBUG_PRINT("hw status 0x%x, plx status 0x%x\n", status, plx_status);
/* an interrupt before all the postconfig stuff gets done could
* cause a NULL dereference if we continue through the
* interrupt handler */
if (dev->attached == 0) {
- DEBUG_PRINT("cb_pcidas64: premature interrupt, ignoring",
- status);
+ DEBUG_PRINT("premature interrupt, ignoring\n");
return IRQ_HANDLED;
}
handle_ai_interrupt(dev, status, plx_status);
@@ -3121,8 +3114,8 @@
/* clear possible plx9080 interrupt sources */
if (plx_status & ICS_LDIA) { /* clear local doorbell interrupt */
- plx_bits = readl(priv(dev)->plx9080_iobase + PLX_DBR_OUT_REG);
- writel(plx_bits, priv(dev)->plx9080_iobase + PLX_DBR_OUT_REG);
+ plx_bits = readl(devpriv->plx9080_iobase + PLX_DBR_OUT_REG);
+ writel(plx_bits, devpriv->plx9080_iobase + PLX_DBR_OUT_REG);
DEBUG_PRINT(" cleared local doorbell bits 0x%x\n", plx_bits);
}
@@ -3131,28 +3124,17 @@
return IRQ_HANDLED;
}
-static void abort_dma(struct comedi_device *dev, unsigned int channel)
-{
- unsigned long flags;
-
- /* spinlock for plx dma control/status reg */
- spin_lock_irqsave(&dev->spinlock, flags);
-
- plx9080_abort_dma(priv(dev)->plx9080_iobase, channel);
-
- spin_unlock_irqrestore(&dev->spinlock, flags);
-}
-
static int ai_cancel(struct comedi_device *dev, struct comedi_subdevice *s)
{
+ struct pcidas64_private *devpriv = dev->private;
unsigned long flags;
spin_lock_irqsave(&dev->spinlock, flags);
- if (priv(dev)->ai_cmd_running == 0) {
+ if (devpriv->ai_cmd_running == 0) {
spin_unlock_irqrestore(&dev->spinlock, flags);
return 0;
}
- priv(dev)->ai_cmd_running = 0;
+ devpriv->ai_cmd_running = 0;
spin_unlock_irqrestore(&dev->spinlock, flags);
disable_ai_pacing(dev);
@@ -3166,29 +3148,31 @@
static int ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
+ const struct pcidas64_board *thisboard = comedi_board(dev);
+ struct pcidas64_private *devpriv = dev->private;
int chan = CR_CHAN(insn->chanspec);
int range = CR_RANGE(insn->chanspec);
/* do some initializing */
- writew(0, priv(dev)->main_iobase + DAC_CONTROL0_REG);
+ writew(0, devpriv->main_iobase + DAC_CONTROL0_REG);
/* set range */
- set_dac_range_bits(dev, &priv(dev)->dac_control1_bits, chan, range);
- writew(priv(dev)->dac_control1_bits,
- priv(dev)->main_iobase + DAC_CONTROL1_REG);
+ set_dac_range_bits(dev, &devpriv->dac_control1_bits, chan, range);
+ writew(devpriv->dac_control1_bits,
+ devpriv->main_iobase + DAC_CONTROL1_REG);
/* write to channel */
- if (board(dev)->layout == LAYOUT_4020) {
+ if (thisboard->layout == LAYOUT_4020) {
writew(data[0] & 0xff,
- priv(dev)->main_iobase + dac_lsb_4020_reg(chan));
+ devpriv->main_iobase + dac_lsb_4020_reg(chan));
writew((data[0] >> 8) & 0xf,
- priv(dev)->main_iobase + dac_msb_4020_reg(chan));
+ devpriv->main_iobase + dac_msb_4020_reg(chan));
} else {
- writew(data[0], priv(dev)->main_iobase + dac_convert_reg(chan));
+ writew(data[0], devpriv->main_iobase + dac_convert_reg(chan));
}
/* remember output value */
- priv(dev)->ao_value[chan] = data[0];
+ devpriv->ao_value[chan] = data[0];
return 1;
}
@@ -3197,7 +3181,9 @@
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
- data[0] = priv(dev)->ao_value[CR_CHAN(insn->chanspec)];
+ struct pcidas64_private *devpriv = dev->private;
+
+ data[0] = devpriv->ao_value[CR_CHAN(insn->chanspec)];
return 1;
}
@@ -3205,8 +3191,9 @@
static void set_dac_control0_reg(struct comedi_device *dev,
const struct comedi_cmd *cmd)
{
+ struct pcidas64_private *devpriv = dev->private;
unsigned int bits = DAC_ENABLE_BIT | WAVEFORM_GATE_LEVEL_BIT |
- WAVEFORM_GATE_ENABLE_BIT | WAVEFORM_GATE_SELECT_BIT;
+ WAVEFORM_GATE_ENABLE_BIT | WAVEFORM_GATE_SELECT_BIT;
if (cmd->start_src == TRIG_EXT) {
bits |= WAVEFORM_TRIG_EXT_BITS;
@@ -3220,12 +3207,13 @@
if (cmd->scan_begin_arg & CR_INVERT)
bits |= DAC_EXT_UPDATE_FALLING_BIT;
}
- writew(bits, priv(dev)->main_iobase + DAC_CONTROL0_REG);
+ writew(bits, devpriv->main_iobase + DAC_CONTROL0_REG);
}
static void set_dac_control1_reg(struct comedi_device *dev,
const struct comedi_cmd *cmd)
{
+ struct pcidas64_private *devpriv = dev->private;
int i;
for (i = 0; i < cmd->chanlist_len; i++) {
@@ -3233,17 +3221,18 @@
channel = CR_CHAN(cmd->chanlist[i]);
range = CR_RANGE(cmd->chanlist[i]);
- set_dac_range_bits(dev, &priv(dev)->dac_control1_bits, channel,
+ set_dac_range_bits(dev, &devpriv->dac_control1_bits, channel,
range);
}
- priv(dev)->dac_control1_bits |= DAC_SW_GATE_BIT;
- writew(priv(dev)->dac_control1_bits,
- priv(dev)->main_iobase + DAC_CONTROL1_REG);
+ devpriv->dac_control1_bits |= DAC_SW_GATE_BIT;
+ writew(devpriv->dac_control1_bits,
+ devpriv->main_iobase + DAC_CONTROL1_REG);
}
static void set_dac_select_reg(struct comedi_device *dev,
const struct comedi_cmd *cmd)
{
+ struct pcidas64_private *devpriv = dev->private;
uint16_t bits;
unsigned int first_channel, last_channel;
@@ -3254,12 +3243,18 @@
bits = (first_channel & 0x7) | (last_channel & 0x7) << 3;
- writew(bits, priv(dev)->main_iobase + DAC_SELECT_REG);
+ writew(bits, devpriv->main_iobase + DAC_SELECT_REG);
+}
+
+static unsigned int get_ao_divisor(unsigned int ns, unsigned int flags)
+{
+ return get_divisor(ns, flags) - 2;
}
static void set_dac_interval_regs(struct comedi_device *dev,
const struct comedi_cmd *cmd)
{
+ struct pcidas64_private *devpriv = dev->private;
unsigned int divisor;
if (cmd->scan_begin_src != TRIG_TIMER)
@@ -3271,102 +3266,35 @@
divisor = max_counter_value;
}
writew(divisor & 0xffff,
- priv(dev)->main_iobase + DAC_SAMPLE_INTERVAL_LOWER_REG);
+ devpriv->main_iobase + DAC_SAMPLE_INTERVAL_LOWER_REG);
writew((divisor >> 16) & 0xff,
- priv(dev)->main_iobase + DAC_SAMPLE_INTERVAL_UPPER_REG);
-}
-
-static unsigned int load_ao_dma_buffer(struct comedi_device *dev,
- const struct comedi_cmd *cmd)
-{
- unsigned int num_bytes, buffer_index, prev_buffer_index;
- unsigned int next_bits;
-
- buffer_index = priv(dev)->ao_dma_index;
- prev_buffer_index = prev_ao_dma_index(dev);
-
- DEBUG_PRINT("attempting to load ao buffer %i (0x%x)\n", buffer_index,
- priv(dev)->ao_buffer_bus_addr[buffer_index]);
-
- num_bytes = comedi_buf_read_n_available(dev->write_subdev->async);
- if (num_bytes > DMA_BUFFER_SIZE)
- num_bytes = DMA_BUFFER_SIZE;
- if (cmd->stop_src == TRIG_COUNT && num_bytes > priv(dev)->ao_count)
- num_bytes = priv(dev)->ao_count;
- num_bytes -= num_bytes % bytes_in_sample;
-
- if (num_bytes == 0)
- return 0;
-
- DEBUG_PRINT("loading %i bytes\n", num_bytes);
-
- num_bytes = cfc_read_array_from_buffer(dev->write_subdev,
- priv(dev)->
- ao_buffer[buffer_index],
- num_bytes);
- priv(dev)->ao_dma_desc[buffer_index].transfer_size =
- cpu_to_le32(num_bytes);
- /* set end of chain bit so we catch underruns */
- next_bits = le32_to_cpu(priv(dev)->ao_dma_desc[buffer_index].next);
- next_bits |= PLX_END_OF_CHAIN_BIT;
- priv(dev)->ao_dma_desc[buffer_index].next = cpu_to_le32(next_bits);
- /* clear end of chain bit on previous buffer now that we have set it
- * for the last buffer */
- next_bits = le32_to_cpu(priv(dev)->ao_dma_desc[prev_buffer_index].next);
- next_bits &= ~PLX_END_OF_CHAIN_BIT;
- priv(dev)->ao_dma_desc[prev_buffer_index].next = cpu_to_le32(next_bits);
-
- priv(dev)->ao_dma_index = (buffer_index + 1) % AO_DMA_RING_COUNT;
- priv(dev)->ao_count -= num_bytes;
-
- return num_bytes;
-}
-
-static void load_ao_dma(struct comedi_device *dev, const struct comedi_cmd *cmd)
-{
- unsigned int num_bytes;
- unsigned int next_transfer_addr;
- void __iomem *pci_addr_reg =
- priv(dev)->plx9080_iobase + PLX_DMA0_PCI_ADDRESS_REG;
- unsigned int buffer_index;
-
- do {
- buffer_index = priv(dev)->ao_dma_index;
- /* don't overwrite data that hasn't been transferred yet */
- next_transfer_addr = readl(pci_addr_reg);
- if (next_transfer_addr >=
- priv(dev)->ao_buffer_bus_addr[buffer_index]
- && next_transfer_addr <
- priv(dev)->ao_buffer_bus_addr[buffer_index] +
- DMA_BUFFER_SIZE)
- return;
- num_bytes = load_ao_dma_buffer(dev, cmd);
- } while (num_bytes >= DMA_BUFFER_SIZE);
+ devpriv->main_iobase + DAC_SAMPLE_INTERVAL_UPPER_REG);
}
static int prep_ao_dma(struct comedi_device *dev, const struct comedi_cmd *cmd)
{
+ struct pcidas64_private *devpriv = dev->private;
unsigned int num_bytes;
int i;
/* clear queue pointer too, since external queue has
* weird interactions with ao fifo */
- writew(0, priv(dev)->main_iobase + ADC_QUEUE_CLEAR_REG);
- writew(0, priv(dev)->main_iobase + DAC_BUFFER_CLEAR_REG);
+ writew(0, devpriv->main_iobase + ADC_QUEUE_CLEAR_REG);
+ writew(0, devpriv->main_iobase + DAC_BUFFER_CLEAR_REG);
num_bytes = (DAC_FIFO_SIZE / 2) * bytes_in_sample;
if (cmd->stop_src == TRIG_COUNT &&
- num_bytes / bytes_in_sample > priv(dev)->ao_count)
- num_bytes = priv(dev)->ao_count * bytes_in_sample;
+ num_bytes / bytes_in_sample > devpriv->ao_count)
+ num_bytes = devpriv->ao_count * bytes_in_sample;
num_bytes = cfc_read_array_from_buffer(dev->write_subdev,
- priv(dev)->ao_bounce_buffer,
+ devpriv->ao_bounce_buffer,
num_bytes);
for (i = 0; i < num_bytes / bytes_in_sample; i++) {
- writew(priv(dev)->ao_bounce_buffer[i],
- priv(dev)->main_iobase + DAC_FIFO_REG);
+ writew(devpriv->ao_bounce_buffer[i],
+ devpriv->main_iobase + DAC_FIFO_REG);
}
- priv(dev)->ao_count -= num_bytes / bytes_in_sample;
- if (cmd->stop_src == TRIG_COUNT && priv(dev)->ao_count == 0)
+ devpriv->ao_count -= num_bytes / bytes_in_sample;
+ if (cmd->stop_src == TRIG_COUNT && devpriv->ao_count == 0)
return 0;
num_bytes = load_ao_dma_buffer(dev, cmd);
if (num_bytes == 0)
@@ -3381,43 +3309,21 @@
static inline int external_ai_queue_in_use(struct comedi_device *dev)
{
+ const struct pcidas64_board *thisboard = comedi_board(dev);
+
if (dev->read_subdev->busy)
return 0;
- if (board(dev)->layout == LAYOUT_4020)
+ if (thisboard->layout == LAYOUT_4020)
return 0;
else if (use_internal_queue_6xxx(&dev->read_subdev->async->cmd))
return 0;
return 1;
}
-static int ao_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
-{
- struct comedi_cmd *cmd = &s->async->cmd;
-
- if (external_ai_queue_in_use(dev)) {
- warn_external_queue(dev);
- return -EBUSY;
- }
- /* disable analog output system during setup */
- writew(0x0, priv(dev)->main_iobase + DAC_CONTROL0_REG);
-
- priv(dev)->ao_dma_index = 0;
- priv(dev)->ao_count = cmd->stop_arg * cmd->chanlist_len;
-
- set_dac_select_reg(dev, cmd);
- set_dac_interval_regs(dev, cmd);
- load_first_dma_descriptor(dev, 0, priv(dev)->ao_dma_desc_bus_addr |
- PLX_DESC_IN_PCI_BIT | PLX_INTR_TERM_COUNT);
-
- set_dac_control1_reg(dev, cmd);
- s->async->inttrig = ao_inttrig;
-
- return 0;
-}
-
static int ao_inttrig(struct comedi_device *dev, struct comedi_subdevice *s,
unsigned int trig_num)
{
+ struct pcidas64_private *devpriv = dev->private;
struct comedi_cmd *cmd = &s->async->cmd;
int retval;
@@ -3431,16 +3337,43 @@
set_dac_control0_reg(dev, cmd);
if (cmd->start_src == TRIG_INT)
- writew(0, priv(dev)->main_iobase + DAC_START_REG);
+ writew(0, devpriv->main_iobase + DAC_START_REG);
s->async->inttrig = NULL;
return 0;
}
+static int ao_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
+{
+ struct pcidas64_private *devpriv = dev->private;
+ struct comedi_cmd *cmd = &s->async->cmd;
+
+ if (external_ai_queue_in_use(dev)) {
+ warn_external_queue(dev);
+ return -EBUSY;
+ }
+ /* disable analog output system during setup */
+ writew(0x0, devpriv->main_iobase + DAC_CONTROL0_REG);
+
+ devpriv->ao_dma_index = 0;
+ devpriv->ao_count = cmd->stop_arg * cmd->chanlist_len;
+
+ set_dac_select_reg(dev, cmd);
+ set_dac_interval_regs(dev, cmd);
+ load_first_dma_descriptor(dev, 0, devpriv->ao_dma_desc_bus_addr |
+ PLX_DESC_IN_PCI_BIT | PLX_INTR_TERM_COUNT);
+
+ set_dac_control1_reg(dev, cmd);
+ s->async->inttrig = ao_inttrig;
+
+ return 0;
+}
+
static int ao_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s,
struct comedi_cmd *cmd)
{
+ const struct pcidas64_board *thisboard = comedi_board(dev);
int err = 0;
unsigned int tmp_arg;
int i;
@@ -3449,7 +3382,7 @@
err |= cfc_check_trigger_src(&cmd->start_src, TRIG_INT | TRIG_EXT);
err |= cfc_check_trigger_src(&cmd->scan_begin_src,
- TRIG_TIMER | TRIG_EXT);
+ TRIG_TIMER | TRIG_EXT);
err |= cfc_check_trigger_src(&cmd->convert_src, TRIG_NOW);
err |= cfc_check_trigger_src(&cmd->scan_end_src, TRIG_COUNT);
err |= cfc_check_trigger_src(&cmd->stop_src, TRIG_NONE);
@@ -3473,29 +3406,21 @@
if (err)
return 2;
- /* step 3: make sure arguments are trivially compatible */
+ /* Step 3: check if arguments are trivially valid */
if (cmd->scan_begin_src == TRIG_TIMER) {
- if (cmd->scan_begin_arg < board(dev)->ao_scan_speed) {
- cmd->scan_begin_arg = board(dev)->ao_scan_speed;
- err++;
- }
- if (get_ao_divisor(cmd->scan_begin_arg,
- cmd->flags) > max_counter_value) {
- cmd->scan_begin_arg =
- (max_counter_value + 2) * TIMER_BASE;
- err++;
+ err |= cfc_check_trigger_arg_min(&cmd->scan_begin_arg,
+ thisboard->ao_scan_speed);
+ if (get_ao_divisor(cmd->scan_begin_arg, cmd->flags) >
+ max_counter_value) {
+ cmd->scan_begin_arg = (max_counter_value + 2) *
+ TIMER_BASE;
+ err |= -EINVAL;
}
}
- if (!cmd->chanlist_len) {
- cmd->chanlist_len = 1;
- err++;
- }
- if (cmd->scan_end_arg != cmd->chanlist_len) {
- cmd->scan_end_arg = cmd->chanlist_len;
- err++;
- }
+ err |= cfc_check_trigger_arg_min(&cmd->chanlist_len, 1);
+ err |= cfc_check_trigger_arg_is(&cmd->scan_end_arg, cmd->chanlist_len);
if (err)
return 3;
@@ -3504,8 +3429,8 @@
if (cmd->scan_begin_src == TRIG_TIMER) {
tmp_arg = cmd->scan_begin_arg;
- cmd->scan_begin_arg =
- get_divisor(cmd->scan_begin_arg, cmd->flags) * TIMER_BASE;
+ cmd->scan_begin_arg = get_divisor(cmd->scan_begin_arg,
+ cmd->flags) * TIMER_BASE;
if (tmp_arg != cmd->scan_begin_arg)
err++;
}
@@ -3533,7 +3458,9 @@
static int ao_cancel(struct comedi_device *dev, struct comedi_subdevice *s)
{
- writew(0x0, priv(dev)->main_iobase + DAC_CONTROL0_REG);
+ struct pcidas64_private *devpriv = dev->private;
+
+ writew(0x0, devpriv->main_iobase + DAC_CONTROL0_REG);
abort_dma(dev, 0);
return 0;
}
@@ -3564,9 +3491,10 @@
static int di_rbits(struct comedi_device *dev, struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
+ struct pcidas64_private *devpriv = dev->private;
unsigned int bits;
- bits = readb(priv(dev)->dio_counter_iobase + DI_REG);
+ bits = readb(devpriv->dio_counter_iobase + DI_REG);
bits &= 0xf;
data[1] = bits;
data[0] = 0;
@@ -3577,13 +3505,15 @@
static int do_wbits(struct comedi_device *dev, struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
+ struct pcidas64_private *devpriv = dev->private;
+
data[0] &= 0xf;
/* zero bits we are going to change */
s->state &= ~data[0];
/* set new bits */
s->state |= data[0] & data[1];
- writeb(s->state, priv(dev)->dio_counter_iobase + DO_REG);
+ writeb(s->state, devpriv->dio_counter_iobase + DO_REG);
data[1] = s->state;
@@ -3594,6 +3524,7 @@
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
+ struct pcidas64_private *devpriv = dev->private;
unsigned int mask;
mask = 1 << CR_CHAN(insn->chanspec);
@@ -3613,7 +3544,7 @@
}
writeb(s->io_bits,
- priv(dev)->dio_counter_iobase + DIO_DIRECTION_60XX_REG);
+ devpriv->dio_counter_iobase + DIO_DIRECTION_60XX_REG);
return 1;
}
@@ -3621,331 +3552,20 @@
static int dio_60xx_wbits(struct comedi_device *dev, struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
+ struct pcidas64_private *devpriv = dev->private;
+
if (data[0]) {
s->state &= ~data[0];
s->state |= (data[0] & data[1]);
writeb(s->state,
- priv(dev)->dio_counter_iobase + DIO_DATA_60XX_REG);
+ devpriv->dio_counter_iobase + DIO_DATA_60XX_REG);
}
- data[1] = readb(priv(dev)->dio_counter_iobase + DIO_DATA_60XX_REG);
+ data[1] = readb(devpriv->dio_counter_iobase + DIO_DATA_60XX_REG);
return insn->n;
}
-static void caldac_write(struct comedi_device *dev, unsigned int channel,
- unsigned int value)
-{
- priv(dev)->caldac_state[channel] = value;
-
- switch (board(dev)->layout) {
- case LAYOUT_60XX:
- case LAYOUT_64XX:
- caldac_8800_write(dev, channel, value);
- break;
- case LAYOUT_4020:
- caldac_i2c_write(dev, channel, value);
- break;
- default:
- break;
- }
-}
-
-static int calib_write_insn(struct comedi_device *dev,
- struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data)
-{
- int channel = CR_CHAN(insn->chanspec);
-
- /* return immediately if setting hasn't changed, since
- * programming these things is slow */
- if (priv(dev)->caldac_state[channel] == data[0])
- return 1;
-
- caldac_write(dev, channel, data[0]);
-
- return 1;
-}
-
-static int calib_read_insn(struct comedi_device *dev,
- struct comedi_subdevice *s, struct comedi_insn *insn,
- unsigned int *data)
-{
- unsigned int channel = CR_CHAN(insn->chanspec);
-
- data[0] = priv(dev)->caldac_state[channel];
-
- return 1;
-}
-
-static void ad8402_write(struct comedi_device *dev, unsigned int channel,
- unsigned int value)
-{
- static const int bitstream_length = 10;
- unsigned int bit, register_bits;
- unsigned int bitstream = ((channel & 0x3) << 8) | (value & 0xff);
- static const int ad8402_udelay = 1;
-
- priv(dev)->ad8402_state[channel] = value;
-
- register_bits = SELECT_8402_64XX_BIT;
- udelay(ad8402_udelay);
- writew(register_bits, priv(dev)->main_iobase + CALIBRATION_REG);
-
- for (bit = 1 << (bitstream_length - 1); bit; bit >>= 1) {
- if (bitstream & bit)
- register_bits |= SERIAL_DATA_IN_BIT;
- else
- register_bits &= ~SERIAL_DATA_IN_BIT;
- udelay(ad8402_udelay);
- writew(register_bits, priv(dev)->main_iobase + CALIBRATION_REG);
- udelay(ad8402_udelay);
- writew(register_bits | SERIAL_CLOCK_BIT,
- priv(dev)->main_iobase + CALIBRATION_REG);
- }
-
- udelay(ad8402_udelay);
- writew(0, priv(dev)->main_iobase + CALIBRATION_REG);
-}
-
-/* for pci-das6402/16, channel 0 is analog input gain and channel 1 is offset */
-static int ad8402_write_insn(struct comedi_device *dev,
- struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data)
-{
- int channel = CR_CHAN(insn->chanspec);
-
- /* return immediately if setting hasn't changed, since
- * programming these things is slow */
- if (priv(dev)->ad8402_state[channel] == data[0])
- return 1;
-
- priv(dev)->ad8402_state[channel] = data[0];
-
- ad8402_write(dev, channel, data[0]);
-
- return 1;
-}
-
-static int ad8402_read_insn(struct comedi_device *dev,
- struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data)
-{
- unsigned int channel = CR_CHAN(insn->chanspec);
-
- data[0] = priv(dev)->ad8402_state[channel];
-
- return 1;
-}
-
-static uint16_t read_eeprom(struct comedi_device *dev, uint8_t address)
-{
- static const int bitstream_length = 11;
- static const int read_command = 0x6;
- unsigned int bitstream = (read_command << 8) | address;
- unsigned int bit;
- void __iomem * const plx_control_addr =
- priv(dev)->plx9080_iobase + PLX_CONTROL_REG;
- uint16_t value;
- static const int value_length = 16;
- static const int eeprom_udelay = 1;
-
- udelay(eeprom_udelay);
- priv(dev)->plx_control_bits &= ~CTL_EE_CLK & ~CTL_EE_CS;
- /* make sure we don't send anything to the i2c bus on 4020 */
- priv(dev)->plx_control_bits |= CTL_USERO;
- writel(priv(dev)->plx_control_bits, plx_control_addr);
- /* activate serial eeprom */
- udelay(eeprom_udelay);
- priv(dev)->plx_control_bits |= CTL_EE_CS;
- writel(priv(dev)->plx_control_bits, plx_control_addr);
-
- /* write read command and desired memory address */
- for (bit = 1 << (bitstream_length - 1); bit; bit >>= 1) {
- /* set bit to be written */
- udelay(eeprom_udelay);
- if (bitstream & bit)
- priv(dev)->plx_control_bits |= CTL_EE_W;
- else
- priv(dev)->plx_control_bits &= ~CTL_EE_W;
- writel(priv(dev)->plx_control_bits, plx_control_addr);
- /* clock in bit */
- udelay(eeprom_udelay);
- priv(dev)->plx_control_bits |= CTL_EE_CLK;
- writel(priv(dev)->plx_control_bits, plx_control_addr);
- udelay(eeprom_udelay);
- priv(dev)->plx_control_bits &= ~CTL_EE_CLK;
- writel(priv(dev)->plx_control_bits, plx_control_addr);
- }
- /* read back value from eeprom memory location */
- value = 0;
- for (bit = 1 << (value_length - 1); bit; bit >>= 1) {
- /* clock out bit */
- udelay(eeprom_udelay);
- priv(dev)->plx_control_bits |= CTL_EE_CLK;
- writel(priv(dev)->plx_control_bits, plx_control_addr);
- udelay(eeprom_udelay);
- priv(dev)->plx_control_bits &= ~CTL_EE_CLK;
- writel(priv(dev)->plx_control_bits, plx_control_addr);
- udelay(eeprom_udelay);
- if (readl(plx_control_addr) & CTL_EE_R)
- value |= bit;
- }
-
- /* deactivate eeprom serial input */
- udelay(eeprom_udelay);
- priv(dev)->plx_control_bits &= ~CTL_EE_CS;
- writel(priv(dev)->plx_control_bits, plx_control_addr);
-
- return value;
-}
-
-static int eeprom_read_insn(struct comedi_device *dev,
- struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data)
-{
- data[0] = read_eeprom(dev, CR_CHAN(insn->chanspec));
-
- return 1;
-}
-
-/* utility function that rounds desired timing to an achievable time, and
- * sets cmd members appropriately.
- * adc paces conversions from master clock by dividing by (x + 3) where x is 24 bit number
- */
-static void check_adc_timing(struct comedi_device *dev, struct comedi_cmd *cmd)
-{
- unsigned int convert_divisor = 0, scan_divisor;
- static const int min_convert_divisor = 3;
- static const int max_convert_divisor =
- max_counter_value + min_convert_divisor;
- static const int min_scan_divisor_4020 = 2;
- unsigned long long max_scan_divisor, min_scan_divisor;
-
- if (cmd->convert_src == TRIG_TIMER) {
- if (board(dev)->layout == LAYOUT_4020) {
- cmd->convert_arg = 0;
- } else {
- convert_divisor =
- get_divisor(cmd->convert_arg, cmd->flags);
- if (convert_divisor > max_convert_divisor)
- convert_divisor = max_convert_divisor;
- if (convert_divisor < min_convert_divisor)
- convert_divisor = min_convert_divisor;
- cmd->convert_arg = convert_divisor * TIMER_BASE;
- }
- } else if (cmd->convert_src == TRIG_NOW)
- cmd->convert_arg = 0;
-
- if (cmd->scan_begin_src == TRIG_TIMER) {
- scan_divisor = get_divisor(cmd->scan_begin_arg, cmd->flags);
- if (cmd->convert_src == TRIG_TIMER) {
- /* XXX check for integer overflows */
- min_scan_divisor = convert_divisor * cmd->chanlist_len;
- max_scan_divisor =
- (convert_divisor * cmd->chanlist_len - 1) +
- max_counter_value;
- } else {
- min_scan_divisor = min_scan_divisor_4020;
- max_scan_divisor = max_counter_value + min_scan_divisor;
- }
- if (scan_divisor > max_scan_divisor)
- scan_divisor = max_scan_divisor;
- if (scan_divisor < min_scan_divisor)
- scan_divisor = min_scan_divisor;
- cmd->scan_begin_arg = scan_divisor * TIMER_BASE;
- }
-
- return;
-}
-
-/* Gets nearest achievable timing given master clock speed, does not
- * take into account possible minimum/maximum divisor values. Used
- * by other timing checking functions. */
-static unsigned int get_divisor(unsigned int ns, unsigned int flags)
-{
- unsigned int divisor;
-
- switch (flags & TRIG_ROUND_MASK) {
- case TRIG_ROUND_UP:
- divisor = (ns + TIMER_BASE - 1) / TIMER_BASE;
- break;
- case TRIG_ROUND_DOWN:
- divisor = ns / TIMER_BASE;
- break;
- case TRIG_ROUND_NEAREST:
- default:
- divisor = (ns + TIMER_BASE / 2) / TIMER_BASE;
- break;
- }
- return divisor;
-}
-
-static unsigned int get_ao_divisor(unsigned int ns, unsigned int flags)
-{
- return get_divisor(ns, flags) - 2;
-}
-
-/* adjusts the size of hardware fifo (which determines block size for dma xfers) */
-static int set_ai_fifo_size(struct comedi_device *dev, unsigned int num_samples)
-{
- unsigned int num_fifo_entries;
- int retval;
- const struct hw_fifo_info *const fifo = board(dev)->ai_fifo;
-
- num_fifo_entries = num_samples / fifo->sample_packing_ratio;
-
- retval = set_ai_fifo_segment_length(dev,
- num_fifo_entries /
- fifo->num_segments);
- if (retval < 0)
- return retval;
-
- num_samples = retval * fifo->num_segments * fifo->sample_packing_ratio;
-
- DEBUG_PRINT("set hardware fifo size to %i\n", num_samples);
-
- return num_samples;
-}
-
-/* query length of fifo */
-static unsigned int ai_fifo_size(struct comedi_device *dev)
-{
- return priv(dev)->ai_fifo_segment_length *
- board(dev)->ai_fifo->num_segments *
- board(dev)->ai_fifo->sample_packing_ratio;
-}
-
-static int set_ai_fifo_segment_length(struct comedi_device *dev,
- unsigned int num_entries)
-{
- static const int increment_size = 0x100;
- const struct hw_fifo_info *const fifo = board(dev)->ai_fifo;
- unsigned int num_increments;
- uint16_t bits;
-
- if (num_entries < increment_size)
- num_entries = increment_size;
- if (num_entries > fifo->max_segment_length)
- num_entries = fifo->max_segment_length;
-
- /* 1 == 256 entries, 2 == 512 entries, etc */
- num_increments = (num_entries + increment_size / 2) / increment_size;
-
- bits = (~(num_increments - 1)) & fifo->fifo_size_reg_mask;
- priv(dev)->fifo_size_bits &= ~fifo->fifo_size_reg_mask;
- priv(dev)->fifo_size_bits |= bits;
- writew(priv(dev)->fifo_size_bits,
- priv(dev)->main_iobase + FIFO_SIZE_REG);
-
- priv(dev)->ai_fifo_segment_length = num_increments * increment_size;
-
- DEBUG_PRINT("set hardware fifo segment length to %i\n",
- priv(dev)->ai_fifo_segment_length);
-
- return priv(dev)->ai_fifo_segment_length;
-}
-
/* pci-6025 8800 caldac:
* address 0 == dac channel 0 offset
* address 1 == dac channel 0 gain
@@ -3970,6 +3590,7 @@
static int caldac_8800_write(struct comedi_device *dev, unsigned int address,
uint8_t value)
{
+ struct pcidas64_private *devpriv = dev->private;
static const int num_caldac_channels = 8;
static const int bitstream_length = 11;
unsigned int bitstream = ((address & 0x7) << 8) | value;
@@ -3985,15 +3606,15 @@
if (bitstream & bit)
register_bits |= SERIAL_DATA_IN_BIT;
udelay(caldac_8800_udelay);
- writew(register_bits, priv(dev)->main_iobase + CALIBRATION_REG);
+ writew(register_bits, devpriv->main_iobase + CALIBRATION_REG);
register_bits |= SERIAL_CLOCK_BIT;
udelay(caldac_8800_udelay);
- writew(register_bits, priv(dev)->main_iobase + CALIBRATION_REG);
+ writew(register_bits, devpriv->main_iobase + CALIBRATION_REG);
}
udelay(caldac_8800_udelay);
- writew(SELECT_8800_BIT, priv(dev)->main_iobase + CALIBRATION_REG);
+ writew(SELECT_8800_BIT, devpriv->main_iobase + CALIBRATION_REG);
udelay(caldac_8800_udelay);
- writew(0, priv(dev)->main_iobase + CALIBRATION_REG);
+ writew(0, devpriv->main_iobase + CALIBRATION_REG);
udelay(caldac_8800_udelay);
return 0;
}
@@ -4059,169 +3680,571 @@
return 0;
}
-/* Their i2c requires a huge delay on setting clock or data high for some reason */
-static const int i2c_high_udelay = 1000;
-static const int i2c_low_udelay = 10;
-
-/* set i2c data line high or low */
-static void i2c_set_sda(struct comedi_device *dev, int state)
+static void caldac_write(struct comedi_device *dev, unsigned int channel,
+ unsigned int value)
{
- static const int data_bit = CTL_EE_W;
- void __iomem *plx_control_addr = priv(dev)->plx9080_iobase +
- PLX_CONTROL_REG;
+ const struct pcidas64_board *thisboard = comedi_board(dev);
+ struct pcidas64_private *devpriv = dev->private;
- if (state) {
- /* set data line high */
- priv(dev)->plx_control_bits &= ~data_bit;
- writel(priv(dev)->plx_control_bits, plx_control_addr);
- udelay(i2c_high_udelay);
- } else { /* set data line low */
+ devpriv->caldac_state[channel] = value;
- priv(dev)->plx_control_bits |= data_bit;
- writel(priv(dev)->plx_control_bits, plx_control_addr);
- udelay(i2c_low_udelay);
+ switch (thisboard->layout) {
+ case LAYOUT_60XX:
+ case LAYOUT_64XX:
+ caldac_8800_write(dev, channel, value);
+ break;
+ case LAYOUT_4020:
+ caldac_i2c_write(dev, channel, value);
+ break;
+ default:
+ break;
}
}
-/* set i2c clock line high or low */
-static void i2c_set_scl(struct comedi_device *dev, int state)
+static int calib_write_insn(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn, unsigned int *data)
{
- static const int clock_bit = CTL_USERO;
- void __iomem *plx_control_addr = priv(dev)->plx9080_iobase +
- PLX_CONTROL_REG;
+ struct pcidas64_private *devpriv = dev->private;
+ int channel = CR_CHAN(insn->chanspec);
- if (state) {
- /* set clock line high */
- priv(dev)->plx_control_bits &= ~clock_bit;
- writel(priv(dev)->plx_control_bits, plx_control_addr);
- udelay(i2c_high_udelay);
- } else { /* set clock line low */
+ /* return immediately if setting hasn't changed, since
+ * programming these things is slow */
+ if (devpriv->caldac_state[channel] == data[0])
+ return 1;
- priv(dev)->plx_control_bits |= clock_bit;
- writel(priv(dev)->plx_control_bits, plx_control_addr);
- udelay(i2c_low_udelay);
- }
+ caldac_write(dev, channel, data[0]);
+
+ return 1;
}
-static void i2c_write_byte(struct comedi_device *dev, uint8_t byte)
+static int calib_read_insn(struct comedi_device *dev,
+ struct comedi_subdevice *s, struct comedi_insn *insn,
+ unsigned int *data)
{
- uint8_t bit;
- unsigned int num_bits = 8;
+ struct pcidas64_private *devpriv = dev->private;
+ unsigned int channel = CR_CHAN(insn->chanspec);
- DEBUG_PRINT("writing to i2c byte 0x%x\n", byte);
+ data[0] = devpriv->caldac_state[channel];
- for (bit = 1 << (num_bits - 1); bit; bit >>= 1) {
- i2c_set_scl(dev, 0);
- if ((byte & bit))
- i2c_set_sda(dev, 1);
+ return 1;
+}
+
+static void ad8402_write(struct comedi_device *dev, unsigned int channel,
+ unsigned int value)
+{
+ struct pcidas64_private *devpriv = dev->private;
+ static const int bitstream_length = 10;
+ unsigned int bit, register_bits;
+ unsigned int bitstream = ((channel & 0x3) << 8) | (value & 0xff);
+ static const int ad8402_udelay = 1;
+
+ devpriv->ad8402_state[channel] = value;
+
+ register_bits = SELECT_8402_64XX_BIT;
+ udelay(ad8402_udelay);
+ writew(register_bits, devpriv->main_iobase + CALIBRATION_REG);
+
+ for (bit = 1 << (bitstream_length - 1); bit; bit >>= 1) {
+ if (bitstream & bit)
+ register_bits |= SERIAL_DATA_IN_BIT;
else
- i2c_set_sda(dev, 0);
- i2c_set_scl(dev, 1);
+ register_bits &= ~SERIAL_DATA_IN_BIT;
+ udelay(ad8402_udelay);
+ writew(register_bits, devpriv->main_iobase + CALIBRATION_REG);
+ udelay(ad8402_udelay);
+ writew(register_bits | SERIAL_CLOCK_BIT,
+ devpriv->main_iobase + CALIBRATION_REG);
}
+
+ udelay(ad8402_udelay);
+ writew(0, devpriv->main_iobase + CALIBRATION_REG);
}
-/* we can't really read the lines, so fake it */
-static int i2c_read_ack(struct comedi_device *dev)
+/* for pci-das6402/16, channel 0 is analog input gain and channel 1 is offset */
+static int ad8402_write_insn(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn, unsigned int *data)
{
- i2c_set_scl(dev, 0);
- i2c_set_sda(dev, 1);
- i2c_set_scl(dev, 1);
+ struct pcidas64_private *devpriv = dev->private;
+ int channel = CR_CHAN(insn->chanspec);
- return 0; /* return fake acknowledge bit */
+ /* return immediately if setting hasn't changed, since
+ * programming these things is slow */
+ if (devpriv->ad8402_state[channel] == data[0])
+ return 1;
+
+ devpriv->ad8402_state[channel] = data[0];
+
+ ad8402_write(dev, channel, data[0]);
+
+ return 1;
}
-/* send start bit */
-static void i2c_start(struct comedi_device *dev)
+static int ad8402_read_insn(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn, unsigned int *data)
{
- i2c_set_scl(dev, 1);
- i2c_set_sda(dev, 1);
- i2c_set_sda(dev, 0);
+ struct pcidas64_private *devpriv = dev->private;
+ unsigned int channel = CR_CHAN(insn->chanspec);
+
+ data[0] = devpriv->ad8402_state[channel];
+
+ return 1;
}
-/* send stop bit */
-static void i2c_stop(struct comedi_device *dev)
+static uint16_t read_eeprom(struct comedi_device *dev, uint8_t address)
{
- i2c_set_scl(dev, 0);
- i2c_set_sda(dev, 0);
- i2c_set_scl(dev, 1);
- i2c_set_sda(dev, 1);
+ struct pcidas64_private *devpriv = dev->private;
+ static const int bitstream_length = 11;
+ static const int read_command = 0x6;
+ unsigned int bitstream = (read_command << 8) | address;
+ unsigned int bit;
+ void __iomem * const plx_control_addr =
+ devpriv->plx9080_iobase + PLX_CONTROL_REG;
+ uint16_t value;
+ static const int value_length = 16;
+ static const int eeprom_udelay = 1;
+
+ udelay(eeprom_udelay);
+ devpriv->plx_control_bits &= ~CTL_EE_CLK & ~CTL_EE_CS;
+ /* make sure we don't send anything to the i2c bus on 4020 */
+ devpriv->plx_control_bits |= CTL_USERO;
+ writel(devpriv->plx_control_bits, plx_control_addr);
+ /* activate serial eeprom */
+ udelay(eeprom_udelay);
+ devpriv->plx_control_bits |= CTL_EE_CS;
+ writel(devpriv->plx_control_bits, plx_control_addr);
+
+ /* write read command and desired memory address */
+ for (bit = 1 << (bitstream_length - 1); bit; bit >>= 1) {
+ /* set bit to be written */
+ udelay(eeprom_udelay);
+ if (bitstream & bit)
+ devpriv->plx_control_bits |= CTL_EE_W;
+ else
+ devpriv->plx_control_bits &= ~CTL_EE_W;
+ writel(devpriv->plx_control_bits, plx_control_addr);
+ /* clock in bit */
+ udelay(eeprom_udelay);
+ devpriv->plx_control_bits |= CTL_EE_CLK;
+ writel(devpriv->plx_control_bits, plx_control_addr);
+ udelay(eeprom_udelay);
+ devpriv->plx_control_bits &= ~CTL_EE_CLK;
+ writel(devpriv->plx_control_bits, plx_control_addr);
+ }
+ /* read back value from eeprom memory location */
+ value = 0;
+ for (bit = 1 << (value_length - 1); bit; bit >>= 1) {
+ /* clock out bit */
+ udelay(eeprom_udelay);
+ devpriv->plx_control_bits |= CTL_EE_CLK;
+ writel(devpriv->plx_control_bits, plx_control_addr);
+ udelay(eeprom_udelay);
+ devpriv->plx_control_bits &= ~CTL_EE_CLK;
+ writel(devpriv->plx_control_bits, plx_control_addr);
+ udelay(eeprom_udelay);
+ if (readl(plx_control_addr) & CTL_EE_R)
+ value |= bit;
+ }
+
+ /* deactivate eeprom serial input */
+ udelay(eeprom_udelay);
+ devpriv->plx_control_bits &= ~CTL_EE_CS;
+ writel(devpriv->plx_control_bits, plx_control_addr);
+
+ return value;
}
-static void i2c_write(struct comedi_device *dev, unsigned int address,
- const uint8_t *data, unsigned int length)
+static int eeprom_read_insn(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn, unsigned int *data)
+{
+ data[0] = read_eeprom(dev, CR_CHAN(insn->chanspec));
+
+ return 1;
+}
+
+/* Allocate and initialize the subdevice structures.
+ */
+static int setup_subdevices(struct comedi_device *dev)
+{
+ const struct pcidas64_board *thisboard = comedi_board(dev);
+ struct pcidas64_private *devpriv = dev->private;
+ struct comedi_subdevice *s;
+ void __iomem *dio_8255_iobase;
+ int i;
+ int ret;
+
+ ret = comedi_alloc_subdevices(dev, 10);
+ if (ret)
+ return ret;
+
+ s = &dev->subdevices[0];
+ /* analog input subdevice */
+ dev->read_subdev = s;
+ s->type = COMEDI_SUBD_AI;
+ s->subdev_flags = SDF_READABLE | SDF_GROUND | SDF_DITHER | SDF_CMD_READ;
+ if (thisboard->layout == LAYOUT_60XX)
+ s->subdev_flags |= SDF_COMMON | SDF_DIFF;
+ else if (thisboard->layout == LAYOUT_64XX)
+ s->subdev_flags |= SDF_DIFF;
+ /* XXX Number of inputs in differential mode is ignored */
+ s->n_chan = thisboard->ai_se_chans;
+ s->len_chanlist = 0x2000;
+ s->maxdata = (1 << thisboard->ai_bits) - 1;
+ s->range_table = thisboard->ai_range_table;
+ s->insn_read = ai_rinsn;
+ s->insn_config = ai_config_insn;
+ s->do_cmd = ai_cmd;
+ s->do_cmdtest = ai_cmdtest;
+ s->cancel = ai_cancel;
+ if (thisboard->layout == LAYOUT_4020) {
+ uint8_t data;
+ /* set adc to read from inputs
+ * (not internal calibration sources) */
+ devpriv->i2c_cal_range_bits = adc_src_4020_bits(4);
+ /* set channels to +-5 volt input ranges */
+ for (i = 0; i < s->n_chan; i++)
+ devpriv->i2c_cal_range_bits |= attenuate_bit(i);
+ data = devpriv->i2c_cal_range_bits;
+ i2c_write(dev, RANGE_CAL_I2C_ADDR, &data, sizeof(data));
+ }
+
+ /* analog output subdevice */
+ s = &dev->subdevices[1];
+ if (thisboard->ao_nchan) {
+ s->type = COMEDI_SUBD_AO;
+ s->subdev_flags = SDF_READABLE | SDF_WRITABLE |
+ SDF_GROUND | SDF_CMD_WRITE;
+ s->n_chan = thisboard->ao_nchan;
+ s->maxdata = (1 << thisboard->ao_bits) - 1;
+ s->range_table = thisboard->ao_range_table;
+ s->insn_read = ao_readback_insn;
+ s->insn_write = ao_winsn;
+ if (ao_cmd_is_supported(thisboard)) {
+ dev->write_subdev = s;
+ s->do_cmdtest = ao_cmdtest;
+ s->do_cmd = ao_cmd;
+ s->len_chanlist = thisboard->ao_nchan;
+ s->cancel = ao_cancel;
+ }
+ } else {
+ s->type = COMEDI_SUBD_UNUSED;
+ }
+
+ /* digital input */
+ s = &dev->subdevices[2];
+ if (thisboard->layout == LAYOUT_64XX) {
+ s->type = COMEDI_SUBD_DI;
+ s->subdev_flags = SDF_READABLE;
+ s->n_chan = 4;
+ s->maxdata = 1;
+ s->range_table = &range_digital;
+ s->insn_bits = di_rbits;
+ } else
+ s->type = COMEDI_SUBD_UNUSED;
+
+ /* digital output */
+ if (thisboard->layout == LAYOUT_64XX) {
+ s = &dev->subdevices[3];
+ s->type = COMEDI_SUBD_DO;
+ s->subdev_flags = SDF_WRITABLE | SDF_READABLE;
+ s->n_chan = 4;
+ s->maxdata = 1;
+ s->range_table = &range_digital;
+ s->insn_bits = do_wbits;
+ } else
+ s->type = COMEDI_SUBD_UNUSED;
+
+ /* 8255 */
+ s = &dev->subdevices[4];
+ if (thisboard->has_8255) {
+ if (thisboard->layout == LAYOUT_4020) {
+ dio_8255_iobase = devpriv->main_iobase + I8255_4020_REG;
+ subdev_8255_init(dev, s, dio_callback_4020,
+ (unsigned long)dio_8255_iobase);
+ } else {
+ dio_8255_iobase =
+ devpriv->dio_counter_iobase + DIO_8255_OFFSET;
+ subdev_8255_init(dev, s, dio_callback,
+ (unsigned long)dio_8255_iobase);
+ }
+ } else
+ s->type = COMEDI_SUBD_UNUSED;
+
+ /* 8 channel dio for 60xx */
+ s = &dev->subdevices[5];
+ if (thisboard->layout == LAYOUT_60XX) {
+ s->type = COMEDI_SUBD_DIO;
+ s->subdev_flags = SDF_WRITABLE | SDF_READABLE;
+ s->n_chan = 8;
+ s->maxdata = 1;
+ s->range_table = &range_digital;
+ s->insn_config = dio_60xx_config_insn;
+ s->insn_bits = dio_60xx_wbits;
+ } else
+ s->type = COMEDI_SUBD_UNUSED;
+
+ /* caldac */
+ s = &dev->subdevices[6];
+ s->type = COMEDI_SUBD_CALIB;
+ s->subdev_flags = SDF_READABLE | SDF_WRITABLE | SDF_INTERNAL;
+ s->n_chan = 8;
+ if (thisboard->layout == LAYOUT_4020)
+ s->maxdata = 0xfff;
+ else
+ s->maxdata = 0xff;
+ s->insn_read = calib_read_insn;
+ s->insn_write = calib_write_insn;
+ for (i = 0; i < s->n_chan; i++)
+ caldac_write(dev, i, s->maxdata / 2);
+
+ /* 2 channel ad8402 potentiometer */
+ s = &dev->subdevices[7];
+ if (thisboard->layout == LAYOUT_64XX) {
+ s->type = COMEDI_SUBD_CALIB;
+ s->subdev_flags = SDF_READABLE | SDF_WRITABLE | SDF_INTERNAL;
+ s->n_chan = 2;
+ s->insn_read = ad8402_read_insn;
+ s->insn_write = ad8402_write_insn;
+ s->maxdata = 0xff;
+ for (i = 0; i < s->n_chan; i++)
+ ad8402_write(dev, i, s->maxdata / 2);
+ } else
+ s->type = COMEDI_SUBD_UNUSED;
+
+ /* serial EEPROM, if present */
+ s = &dev->subdevices[8];
+ if (readl(devpriv->plx9080_iobase + PLX_CONTROL_REG) & CTL_EECHK) {
+ s->type = COMEDI_SUBD_MEMORY;
+ s->subdev_flags = SDF_READABLE | SDF_INTERNAL;
+ s->n_chan = 128;
+ s->maxdata = 0xffff;
+ s->insn_read = eeprom_read_insn;
+ } else
+ s->type = COMEDI_SUBD_UNUSED;
+
+ /* user counter subd XXX */
+ s = &dev->subdevices[9];
+ s->type = COMEDI_SUBD_UNUSED;
+
+ return 0;
+}
+
+static const struct pcidas64_board
+*cb_pcidas64_find_pci_board(struct pci_dev *pcidev)
{
unsigned int i;
- uint8_t bitstream;
- static const int read_bit = 0x1;
-/* XXX need mutex to prevent simultaneous attempts to access eeprom and i2c bus */
+ for (i = 0; i < ARRAY_SIZE(pcidas64_boards); i++)
+ if (pcidev->device == pcidas64_boards[i].device_id)
+ return &pcidas64_boards[i];
+ return NULL;
+}
- /* make sure we dont send anything to eeprom */
- priv(dev)->plx_control_bits &= ~CTL_EE_CS;
+static int auto_attach(struct comedi_device *dev,
+ unsigned long context_unused)
+{
+ const struct pcidas64_board *thisboard;
+ struct pcidas64_private *devpriv;
+ struct pci_dev *pcidev = comedi_to_pci_dev(dev);
+ uint32_t local_range, local_decode;
+ int retval;
- i2c_stop(dev);
- i2c_start(dev);
-
- /* send address and write bit */
- bitstream = (address << 1) & ~read_bit;
- i2c_write_byte(dev, bitstream);
-
- /* get acknowledge */
- if (i2c_read_ack(dev) != 0) {
- comedi_error(dev, "i2c write failed: no acknowledge");
- i2c_stop(dev);
- return;
+ dev->board_ptr = cb_pcidas64_find_pci_board(pcidev);
+ if (!dev->board_ptr) {
+ dev_err(dev->class_dev,
+ "cb_pcidas64: does not support pci %s\n",
+ pci_name(pcidev));
+ return -EINVAL;
}
- /* write data bytes */
- for (i = 0; i < length; i++) {
- i2c_write_byte(dev, data[i]);
- if (i2c_read_ack(dev) != 0) {
- comedi_error(dev, "i2c write failed: no acknowledge");
- i2c_stop(dev);
- return;
+ thisboard = comedi_board(dev);
+
+ devpriv = kzalloc(sizeof(*devpriv), GFP_KERNEL);
+ if (!devpriv)
+ return -ENOMEM;
+ dev->private = devpriv;
+
+ if (comedi_pci_enable(pcidev, dev->driver->driver_name)) {
+ dev_warn(dev->class_dev,
+ "failed to enable PCI device and request regions\n");
+ return -EIO;
+ }
+ pci_set_master(pcidev);
+
+ /* Initialize dev->board_name */
+ dev->board_name = thisboard->name;
+
+ dev->iobase = pci_resource_start(pcidev, MAIN_BADDRINDEX);
+
+ devpriv->plx9080_phys_iobase =
+ pci_resource_start(pcidev, PLX9080_BADDRINDEX);
+ devpriv->main_phys_iobase = dev->iobase;
+ devpriv->dio_counter_phys_iobase =
+ pci_resource_start(pcidev, DIO_COUNTER_BADDRINDEX);
+
+ /* remap, won't work with 2.0 kernels but who cares */
+ devpriv->plx9080_iobase =
+ ioremap(devpriv->plx9080_phys_iobase,
+ pci_resource_len(pcidev, PLX9080_BADDRINDEX));
+ devpriv->main_iobase =
+ ioremap(devpriv->main_phys_iobase,
+ pci_resource_len(pcidev, MAIN_BADDRINDEX));
+ devpriv->dio_counter_iobase =
+ ioremap(devpriv->dio_counter_phys_iobase,
+ pci_resource_len(pcidev, DIO_COUNTER_BADDRINDEX));
+
+ if (!devpriv->plx9080_iobase || !devpriv->main_iobase
+ || !devpriv->dio_counter_iobase) {
+ dev_warn(dev->class_dev, "failed to remap io memory\n");
+ return -ENOMEM;
+ }
+
+ DEBUG_PRINT(" plx9080 remapped to 0x%p\n", devpriv->plx9080_iobase);
+ DEBUG_PRINT(" main remapped to 0x%p\n", devpriv->main_iobase);
+ DEBUG_PRINT(" diocounter remapped to 0x%p\n",
+ devpriv->dio_counter_iobase);
+
+ /* figure out what local addresses are */
+ local_range = readl(devpriv->plx9080_iobase + PLX_LAS0RNG_REG) &
+ LRNG_MEM_MASK;
+ local_decode = readl(devpriv->plx9080_iobase + PLX_LAS0MAP_REG) &
+ local_range & LMAP_MEM_MASK;
+ devpriv->local0_iobase = ((uint32_t)devpriv->main_phys_iobase &
+ ~local_range) | local_decode;
+ local_range = readl(devpriv->plx9080_iobase + PLX_LAS1RNG_REG) &
+ LRNG_MEM_MASK;
+ local_decode = readl(devpriv->plx9080_iobase + PLX_LAS1MAP_REG) &
+ local_range & LMAP_MEM_MASK;
+ devpriv->local1_iobase = ((uint32_t)devpriv->dio_counter_phys_iobase &
+ ~local_range) | local_decode;
+
+ DEBUG_PRINT(" local 0 io addr 0x%x\n", devpriv->local0_iobase);
+ DEBUG_PRINT(" local 1 io addr 0x%x\n", devpriv->local1_iobase);
+
+ retval = alloc_and_init_dma_members(dev);
+ if (retval < 0)
+ return retval;
+
+ devpriv->hw_revision =
+ hw_revision(dev, readw(devpriv->main_iobase + HW_STATUS_REG));
+ dev_dbg(dev->class_dev, "stc hardware revision %i\n",
+ devpriv->hw_revision);
+ init_plx9080(dev);
+ init_stc_registers(dev);
+ /* get irq */
+ if (request_irq(pcidev->irq, handle_interrupt, IRQF_SHARED,
+ "cb_pcidas64", dev)) {
+ dev_dbg(dev->class_dev, "unable to allocate irq %u\n",
+ pcidev->irq);
+ return -EINVAL;
+ }
+ dev->irq = pcidev->irq;
+ dev_dbg(dev->class_dev, "irq %u\n", dev->irq);
+
+ retval = setup_subdevices(dev);
+ if (retval < 0)
+ return retval;
+
+ return 0;
+}
+
+static void detach(struct comedi_device *dev)
+{
+ const struct pcidas64_board *thisboard = comedi_board(dev);
+ struct pci_dev *pcidev = comedi_to_pci_dev(dev);
+ struct pcidas64_private *devpriv = dev->private;
+ unsigned int i;
+
+ if (dev->irq)
+ free_irq(dev->irq, dev);
+ if (devpriv) {
+ if (pcidev) {
+ if (devpriv->plx9080_iobase) {
+ disable_plx_interrupts(dev);
+ iounmap(devpriv->plx9080_iobase);
+ }
+ if (devpriv->main_iobase)
+ iounmap(devpriv->main_iobase);
+ if (devpriv->dio_counter_iobase)
+ iounmap(devpriv->dio_counter_iobase);
+ /* free pci dma buffers */
+ for (i = 0; i < ai_dma_ring_count(thisboard); i++) {
+ if (devpriv->ai_buffer[i])
+ pci_free_consistent(pcidev,
+ DMA_BUFFER_SIZE,
+ devpriv->ai_buffer[i],
+ devpriv->ai_buffer_bus_addr[i]);
+ }
+ for (i = 0; i < AO_DMA_RING_COUNT; i++) {
+ if (devpriv->ao_buffer[i])
+ pci_free_consistent(pcidev,
+ DMA_BUFFER_SIZE,
+ devpriv->ao_buffer[i],
+ devpriv->ao_buffer_bus_addr[i]);
+ }
+ /* free dma descriptors */
+ if (devpriv->ai_dma_desc)
+ pci_free_consistent(pcidev,
+ sizeof(struct plx_dma_desc) *
+ ai_dma_ring_count(thisboard),
+ devpriv->ai_dma_desc,
+ devpriv->ai_dma_desc_bus_addr);
+ if (devpriv->ao_dma_desc)
+ pci_free_consistent(pcidev,
+ sizeof(struct plx_dma_desc) *
+ AO_DMA_RING_COUNT,
+ devpriv->ao_dma_desc,
+ devpriv->ao_dma_desc_bus_addr);
}
}
- i2c_stop(dev);
+ if (dev->subdevices)
+ subdev_8255_cleanup(dev, &dev->subdevices[4]);
+ if (pcidev) {
+ if (dev->iobase)
+ comedi_pci_disable(pcidev);
+ }
}
static struct comedi_driver cb_pcidas64_driver = {
.driver_name = "cb_pcidas64",
.module = THIS_MODULE,
- .attach = attach,
+ .auto_attach = auto_attach,
.detach = detach,
};
-static int __devinit cb_pcidas64_pci_probe(struct pci_dev *dev,
+static int cb_pcidas64_pci_probe(struct pci_dev *dev,
const struct pci_device_id *ent)
{
return comedi_pci_auto_config(dev, &cb_pcidas64_driver);
}
-static void __devexit cb_pcidas64_pci_remove(struct pci_dev *dev)
+static void cb_pcidas64_pci_remove(struct pci_dev *dev)
{
comedi_pci_auto_unconfig(dev);
}
static DEFINE_PCI_DEVICE_TABLE(cb_pcidas64_pci_table) = {
- { PCI_DEVICE(PCI_VENDOR_ID_COMPUTERBOARDS, 0x001d) },
- { PCI_DEVICE(PCI_VENDOR_ID_COMPUTERBOARDS, 0x001e) },
- { PCI_DEVICE(PCI_VENDOR_ID_COMPUTERBOARDS, 0x0035) },
- { PCI_DEVICE(PCI_VENDOR_ID_COMPUTERBOARDS, 0x0036) },
- { PCI_DEVICE(PCI_VENDOR_ID_COMPUTERBOARDS, 0x0037) },
- { PCI_DEVICE(PCI_VENDOR_ID_COMPUTERBOARDS, 0x0052) },
- { PCI_DEVICE(PCI_VENDOR_ID_COMPUTERBOARDS, 0x005d) },
- { PCI_DEVICE(PCI_VENDOR_ID_COMPUTERBOARDS, 0x005e) },
- { PCI_DEVICE(PCI_VENDOR_ID_COMPUTERBOARDS, 0x005f) },
- { PCI_DEVICE(PCI_VENDOR_ID_COMPUTERBOARDS, 0x0061) },
- { PCI_DEVICE(PCI_VENDOR_ID_COMPUTERBOARDS, 0x0062) },
- { PCI_DEVICE(PCI_VENDOR_ID_COMPUTERBOARDS, 0x0063) },
- { PCI_DEVICE(PCI_VENDOR_ID_COMPUTERBOARDS, 0x0064) },
- { PCI_DEVICE(PCI_VENDOR_ID_COMPUTERBOARDS, 0x0066) },
- { PCI_DEVICE(PCI_VENDOR_ID_COMPUTERBOARDS, 0x0067) },
- { PCI_DEVICE(PCI_VENDOR_ID_COMPUTERBOARDS, 0x0068) },
- { PCI_DEVICE(PCI_VENDOR_ID_COMPUTERBOARDS, 0x006f) },
- { PCI_DEVICE(PCI_VENDOR_ID_COMPUTERBOARDS, 0x0078) },
- { PCI_DEVICE(PCI_VENDOR_ID_COMPUTERBOARDS, 0x0079) },
+ { PCI_DEVICE(PCI_VENDOR_ID_CB, 0x001d) },
+ { PCI_DEVICE(PCI_VENDOR_ID_CB, 0x001e) },
+ { PCI_DEVICE(PCI_VENDOR_ID_CB, 0x0035) },
+ { PCI_DEVICE(PCI_VENDOR_ID_CB, 0x0036) },
+ { PCI_DEVICE(PCI_VENDOR_ID_CB, 0x0037) },
+ { PCI_DEVICE(PCI_VENDOR_ID_CB, 0x0052) },
+ { PCI_DEVICE(PCI_VENDOR_ID_CB, 0x005d) },
+ { PCI_DEVICE(PCI_VENDOR_ID_CB, 0x005e) },
+ { PCI_DEVICE(PCI_VENDOR_ID_CB, 0x005f) },
+ { PCI_DEVICE(PCI_VENDOR_ID_CB, 0x0061) },
+ { PCI_DEVICE(PCI_VENDOR_ID_CB, 0x0062) },
+ { PCI_DEVICE(PCI_VENDOR_ID_CB, 0x0063) },
+ { PCI_DEVICE(PCI_VENDOR_ID_CB, 0x0064) },
+ { PCI_DEVICE(PCI_VENDOR_ID_CB, 0x0066) },
+ { PCI_DEVICE(PCI_VENDOR_ID_CB, 0x0067) },
+ { PCI_DEVICE(PCI_VENDOR_ID_CB, 0x0068) },
+ { PCI_DEVICE(PCI_VENDOR_ID_CB, 0x006f) },
+ { PCI_DEVICE(PCI_VENDOR_ID_CB, 0x0078) },
+ { PCI_DEVICE(PCI_VENDOR_ID_CB, 0x0079) },
{ 0 }
};
MODULE_DEVICE_TABLE(pci, cb_pcidas64_pci_table);
@@ -4230,7 +4253,7 @@
.name = "cb_pcidas64",
.id_table = cb_pcidas64_pci_table,
.probe = cb_pcidas64_pci_probe,
- .remove = __devexit_p(cb_pcidas64_pci_remove),
+ .remove = cb_pcidas64_pci_remove,
};
module_comedi_pci_driver(cb_pcidas64_driver, cb_pcidas64_pci_driver);
diff --git a/drivers/staging/comedi/drivers/cb_pcidda.c b/drivers/staging/comedi/drivers/cb_pcidda.c
index aef946d..7c6029a 100644
--- a/drivers/staging/comedi/drivers/cb_pcidda.c
+++ b/drivers/staging/comedi/drivers/cb_pcidda.c
@@ -1,90 +1,78 @@
/*
- comedi/drivers/cb_pcidda.c
- This intends to be a driver for the ComputerBoards / MeasurementComputing
- PCI-DDA series.
+ * comedi/drivers/cb_pcidda.c
+ * Driver for the ComputerBoards / MeasurementComputing PCI-DDA series.
+ *
+ * Copyright (C) 2001 Ivan Martinez <ivanmr@altavista.com>
+ * Copyright (C) 2001 Frank Mori Hess <fmhess@users.sourceforge.net>
+ *
+ * COMEDI - Linux Control and Measurement Device Interface
+ * Copyright (C) 1997-8 David A. Schleef <ds@schleef.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
- Copyright (C) 2001 Ivan Martinez <ivanmr@altavista.com>
- Copyright (C) 2001 Frank Mori Hess <fmhess@users.sourceforge.net>
-
- COMEDI - Linux Control and Measurement Device Interface
- Copyright (C) 1997-8 David A. Schleef <ds@schleef.org>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-*/
/*
-Driver: cb_pcidda
-Description: MeasurementComputing PCI-DDA series
-Author: Ivan Martinez <ivanmr@altavista.com>, Frank Mori Hess <fmhess@users.sourceforge.net>
-Status: Supports 08/16, 04/16, 02/16, 08/12, 04/12, and 02/12
-Devices: [Measurement Computing] PCI-DDA08/12 (cb_pcidda), PCI-DDA04/12,
- PCI-DDA02/12, PCI-DDA08/16, PCI-DDA04/16, PCI-DDA02/16
-
-Configuration options:
- [0] - PCI bus of device (optional)
- [1] - PCI slot of device (optional)
- If bus/slot is not specified, the first available PCI
- device will be used.
-
-Only simple analog output writing is supported.
-
-So far it has only been tested with:
- - PCI-DDA08/12
-Please report success/failure with other different cards to
-<comedi@comedi.org>.
-*/
+ * Driver: cb_pcidda
+ * Description: MeasurementComputing PCI-DDA series
+ * Devices: (Measurement Computing) PCI-DDA08/12 [pci-dda08/12]
+ * (Measurement Computing) PCI-DDA04/12 [pci-dda04/12]
+ * (Measurement Computing) PCI-DDA02/12 [pci-dda02/12]
+ * (Measurement Computing) PCI-DDA08/16 [pci-dda08/16]
+ * (Measurement Computing) PCI-DDA04/16 [pci-dda04/16]
+ * (Measurement Computing) PCI-DDA02/16 [pci-dda02/16]
+ * Author: Ivan Martinez <ivanmr@altavista.com>
+ * Frank Mori Hess <fmhess@users.sourceforge.net>
+ * Status: works
+ *
+ * Configuration options: not applicable, uses PCI auto config
+ *
+ * Only simple analog output writing is supported.
+ */
#include "../comedidev.h"
#include "comedi_fc.h"
#include "8255.h"
-/* PCI vendor number of ComputerBoards */
-#define PCI_VENDOR_ID_CB 0x1307
+/*
+ * ComputerBoards PCI Device ID's supported by this driver
+ */
+#define PCI_DEVICE_ID_DDA02_12 0x0020
+#define PCI_DEVICE_ID_DDA04_12 0x0021
+#define PCI_DEVICE_ID_DDA08_12 0x0022
+#define PCI_DEVICE_ID_DDA02_16 0x0023
+#define PCI_DEVICE_ID_DDA04_16 0x0024
+#define PCI_DEVICE_ID_DDA08_16 0x0025
+
#define EEPROM_SIZE 128 /* number of entries in eeprom */
/* maximum number of ao channels for supported boards */
#define MAX_AO_CHANNELS 8
/* Digital I/O registers */
-#define PORT1A 0 /* PORT 1A DATA */
-
-#define PORT1B 1 /* PORT 1B DATA */
-
-#define PORT1C 2 /* PORT 1C DATA */
-
-#define CONTROL1 3 /* CONTROL REGISTER 1 */
-
-#define PORT2A 4 /* PORT 2A DATA */
-
-#define PORT2B 5 /* PORT 2B DATA */
-
-#define PORT2C 6 /* PORT 2C DATA */
-
-#define CONTROL2 7 /* CONTROL REGISTER 2 */
+#define CB_DDA_DIO0_8255_BASE 0x00
+#define CB_DDA_DIO1_8255_BASE 0x04
/* DAC registers */
-#define DACONTROL 0 /* D/A CONTROL REGISTER */
-#define SU 0000001 /* Simultaneous update enabled */
-#define NOSU 0000000 /* Simultaneous update disabled */
-#define ENABLEDAC 0000002 /* Enable specified DAC */
-#define DISABLEDAC 0000000 /* Disable specified DAC */
-#define RANGE2V5 0000000 /* 2.5V */
-#define RANGE5V 0000200 /* 5V */
-#define RANGE10V 0000300 /* 10V */
-#define UNIP 0000400 /* Unipolar outputs */
-#define BIP 0000000 /* Bipolar outputs */
+#define CB_DDA_DA_CTRL_REG 0x00 /* D/A Control Register */
+#define CB_DDA_DA_CTRL_SU (1 << 0) /* Simultaneous update */
+#define CB_DDA_DA_CTRL_EN (1 << 1) /* Enable specified DAC */
+#define CB_DDA_DA_CTRL_DAC(x) ((x) << 2) /* Specify DAC channel */
+#define CB_DDA_DA_CTRL_RANGE2V5 (0 << 6) /* 2.5V range */
+#define CB_DDA_DA_CTRL_RANGE5V (2 << 6) /* 5V range */
+#define CB_DDA_DA_CTRL_RANGE10V (3 << 6) /* 10V range */
+#define CB_DDA_DA_CTRL_UNIP (1 << 8) /* Unipolar range */
#define DACALIBRATION1 4 /* D/A CALIBRATION REGISTER 1 */
/* write bits */
@@ -109,107 +97,67 @@
/* manual says to set this bit with no explanation */
#define DUMMY_BIT 0x40
-#define DADATA 8 /* FIRST D/A DATA REGISTER (0) */
+#define CB_DDA_DA_DATA_REG(x) (0x08 + ((x) * 2))
+
+/* Offsets for the caldac channels */
+#define CB_DDA_CALDAC_FINE_GAIN 0
+#define CB_DDA_CALDAC_COURSE_GAIN 1
+#define CB_DDA_CALDAC_COURSE_OFFSET 2
+#define CB_DDA_CALDAC_FINE_OFFSET 3
static const struct comedi_lrange cb_pcidda_ranges = {
- 6,
- {
- BIP_RANGE(10),
- BIP_RANGE(5),
- BIP_RANGE(2.5),
- UNI_RANGE(10),
- UNI_RANGE(5),
- UNI_RANGE(2.5),
- }
+ 6, {
+ BIP_RANGE(10),
+ BIP_RANGE(5),
+ BIP_RANGE(2.5),
+ UNI_RANGE(10),
+ UNI_RANGE(5),
+ UNI_RANGE(2.5)
+ }
};
-/*
- * Board descriptions for two imaginary boards. Describing the
- * boards in this way is optional, and completely driver-dependent.
- * Some drivers use arrays such as this, other do not.
- */
struct cb_pcidda_board {
const char *name;
- char status; /* Driver status: */
-
- /*
- * 0 - tested
- * 1 - manual read, not tested
- * 2 - manual not read
- */
-
unsigned short device_id;
int ao_chans;
int ao_bits;
- const struct comedi_lrange *ranges;
};
static const struct cb_pcidda_board cb_pcidda_boards[] = {
{
- .name = "pci-dda02/12",
- .status = 1,
- .device_id = 0x20,
- .ao_chans = 2,
- .ao_bits = 12,
- .ranges = &cb_pcidda_ranges,
- },
- {
- .name = "pci-dda04/12",
- .status = 1,
- .device_id = 0x21,
- .ao_chans = 4,
- .ao_bits = 12,
- .ranges = &cb_pcidda_ranges,
- },
- {
- .name = "pci-dda08/12",
- .status = 0,
- .device_id = 0x22,
- .ao_chans = 8,
- .ao_bits = 12,
- .ranges = &cb_pcidda_ranges,
- },
- {
- .name = "pci-dda02/16",
- .status = 2,
- .device_id = 0x23,
- .ao_chans = 2,
- .ao_bits = 16,
- .ranges = &cb_pcidda_ranges,
- },
- {
- .name = "pci-dda04/16",
- .status = 2,
- .device_id = 0x24,
- .ao_chans = 4,
- .ao_bits = 16,
- .ranges = &cb_pcidda_ranges,
- },
- {
- .name = "pci-dda08/16",
- .status = 0,
- .device_id = 0x25,
- .ao_chans = 8,
- .ao_bits = 16,
- .ranges = &cb_pcidda_ranges,
- },
+ .name = "pci-dda02/12",
+ .device_id = PCI_DEVICE_ID_DDA02_12,
+ .ao_chans = 2,
+ .ao_bits = 12,
+ }, {
+ .name = "pci-dda04/12",
+ .device_id = PCI_DEVICE_ID_DDA04_12,
+ .ao_chans = 4,
+ .ao_bits = 12,
+ }, {
+ .name = "pci-dda08/12",
+ .device_id = PCI_DEVICE_ID_DDA08_12,
+ .ao_chans = 8,
+ .ao_bits = 12,
+ }, {
+ .name = "pci-dda02/16",
+ .device_id = PCI_DEVICE_ID_DDA02_16,
+ .ao_chans = 2,
+ .ao_bits = 16,
+ }, {
+ .name = "pci-dda04/16",
+ .device_id = PCI_DEVICE_ID_DDA04_16,
+ .ao_chans = 4,
+ .ao_bits = 16,
+ }, {
+ .name = "pci-dda08/16",
+ .device_id = PCI_DEVICE_ID_DDA08_16,
+ .ao_chans = 8,
+ .ao_bits = 16,
+ },
};
-/*
- * this structure is for data unique to this hardware driver. If
- * several hardware drivers keep similar information in this structure,
- * feel free to suggest moving the variable to the struct comedi_device
- * struct.
- */
struct cb_pcidda_private {
- int data;
-
- unsigned long digitalio;
- unsigned long dac;
-
- /* unsigned long control_status; */
- /* unsigned long adc_fifo; */
-
/* bits last written to da calibration register 1 */
unsigned int dac_cal1_bits;
/* current range settings for output channels */
@@ -217,181 +165,16 @@
u16 eeprom_data[EEPROM_SIZE]; /* software copy of board's eeprom */
};
-/*
- * I will program this later... ;-)
- */
-#if 0
-static int cb_pcidda_ai_cmd(struct comedi_device *dev,
- struct comedi_subdevice *s)
-{
- printk("cb_pcidda_ai_cmd\n");
- printk("subdev: %d\n", cmd->subdev);
- printk("flags: %d\n", cmd->flags);
- printk("start_src: %d\n", cmd->start_src);
- printk("start_arg: %d\n", cmd->start_arg);
- printk("scan_begin_src: %d\n", cmd->scan_begin_src);
- printk("convert_src: %d\n", cmd->convert_src);
- printk("convert_arg: %d\n", cmd->convert_arg);
- printk("scan_end_src: %d\n", cmd->scan_end_src);
- printk("scan_end_arg: %d\n", cmd->scan_end_arg);
- printk("stop_src: %d\n", cmd->stop_src);
- printk("stop_arg: %d\n", cmd->stop_arg);
- printk("chanlist_len: %d\n", cmd->chanlist_len);
-}
-#endif
-
-#if 0
-static int cb_pcidda_ai_cmdtest(struct comedi_device *dev,
- struct comedi_subdevice *s,
- struct comedi_cmd *cmd)
-{
- int err = 0;
- int tmp;
-
- /* Step 1 : check if triggers are trivially valid */
-
- err |= cfc_check_trigger_src(&cmd->start_src, TRIG_NOW);
- err |= cfc_check_trigger_src(&cmd->scan_begin_src,
- TRIG_TIMER | TRIG_EXT);
- err |= cfc_check_trigger_src(&cmd->convert_src,
- TRIG_TIMER | TRIG_EXT);
- err |= cfc_check_trigger_src(&cmd->scan_end_src, TRIG_COUNT);
- err |= cfc_check_trigger_src(&cmd->stop_src, TRIG_COUNT | TRIG_NONE);
-
- if (err)
- return 1;
-
- /* Step 2a : make sure trigger sources are unique */
-
- err |= cfc_check_trigger_is_unique(cmd->scan_begin_src);
- err |= cfc_check_trigger_is_unique(cmd->convert_src);
- err |= cfc_check_trigger_is_unique(cmd->stop_src);
-
- /* Step 2b : and mutually compatible */
-
- if (err)
- return 2;
-
- /* step 3: make sure arguments are trivially compatible */
-
- if (cmd->start_arg != 0) {
- cmd->start_arg = 0;
- err++;
- }
-#define MAX_SPEED 10000 /* in nanoseconds */
-#define MIN_SPEED 1000000000 /* in nanoseconds */
-
- if (cmd->scan_begin_src == TRIG_TIMER) {
- if (cmd->scan_begin_arg < MAX_SPEED) {
- cmd->scan_begin_arg = MAX_SPEED;
- err++;
- }
- if (cmd->scan_begin_arg > MIN_SPEED) {
- cmd->scan_begin_arg = MIN_SPEED;
- err++;
- }
- } else {
- /* external trigger */
- /* should be level/edge, hi/lo specification here */
- /* should specify multiple external triggers */
- if (cmd->scan_begin_arg > 9) {
- cmd->scan_begin_arg = 9;
- err++;
- }
- }
- if (cmd->convert_src == TRIG_TIMER) {
- if (cmd->convert_arg < MAX_SPEED) {
- cmd->convert_arg = MAX_SPEED;
- err++;
- }
- if (cmd->convert_arg > MIN_SPEED) {
- cmd->convert_arg = MIN_SPEED;
- err++;
- }
- } else {
- /* external trigger */
- /* see above */
- if (cmd->convert_arg > 9) {
- cmd->convert_arg = 9;
- err++;
- }
- }
-
- if (cmd->scan_end_arg != cmd->chanlist_len) {
- cmd->scan_end_arg = cmd->chanlist_len;
- err++;
- }
- if (cmd->stop_src == TRIG_COUNT) {
- if (cmd->stop_arg > 0x00ffffff) {
- cmd->stop_arg = 0x00ffffff;
- err++;
- }
- } else {
- /* TRIG_NONE */
- if (cmd->stop_arg != 0) {
- cmd->stop_arg = 0;
- err++;
- }
- }
-
- if (err)
- return 3;
-
- /* step 4: fix up any arguments */
-
- if (cmd->scan_begin_src == TRIG_TIMER) {
- tmp = cmd->scan_begin_arg;
- cb_pcidda_ns_to_timer(&cmd->scan_begin_arg,
- cmd->flags & TRIG_ROUND_MASK);
- if (tmp != cmd->scan_begin_arg)
- err++;
- }
- if (cmd->convert_src == TRIG_TIMER) {
- tmp = cmd->convert_arg;
- cb_pcidda_ns_to_timer(&cmd->convert_arg,
- cmd->flags & TRIG_ROUND_MASK);
- if (tmp != cmd->convert_arg)
- err++;
- if (cmd->scan_begin_src == TRIG_TIMER &&
- cmd->scan_begin_arg <
- cmd->convert_arg * cmd->scan_end_arg) {
- cmd->scan_begin_arg =
- cmd->convert_arg * cmd->scan_end_arg;
- err++;
- }
- }
-
- if (err)
- return 4;
-
- return 0;
-}
-#endif
-
-/* This function doesn't require a particular form, this is just
- * what happens to be used in some of the drivers. It should
- * convert ns nanoseconds to a counter value suitable for programming
- * the device. Also, it should adjust ns so that it cooresponds to
- * the actual time that the device will use. */
-#if 0
-static int cb_pcidda_ns_to_timer(unsigned int *ns, int round)
-{
- /* trivial timer */
- return *ns;
-}
-#endif
-
/* lowlevel read from eeprom */
static unsigned int cb_pcidda_serial_in(struct comedi_device *dev)
{
- struct cb_pcidda_private *devpriv = dev->private;
unsigned int value = 0;
int i;
const int value_width = 16; /* number of bits wide values are */
for (i = 1; i <= value_width; i++) {
/* read bits most significant bit first */
- if (inw_p(devpriv->dac + DACALIBRATION1) & SERIAL_OUT_BIT)
+ if (inw_p(dev->iobase + DACALIBRATION1) & SERIAL_OUT_BIT)
value |= 1 << (value_width - i);
}
@@ -411,7 +194,7 @@
devpriv->dac_cal1_bits |= SERIAL_IN_BIT;
else
devpriv->dac_cal1_bits &= ~SERIAL_IN_BIT;
- outw_p(devpriv->dac_cal1_bits, devpriv->dac + DACALIBRATION1);
+ outw_p(devpriv->dac_cal1_bits, dev->iobase + DACALIBRATION1);
}
}
@@ -419,7 +202,6 @@
static unsigned int cb_pcidda_read_eeprom(struct comedi_device *dev,
unsigned int address)
{
- struct cb_pcidda_private *devpriv = dev->private;
unsigned int i;
unsigned int cal2_bits;
unsigned int value;
@@ -435,7 +217,7 @@
/* deactivate caldacs (one caldac for every two channels) */
for (i = 0; i < max_num_caldacs; i++)
cal2_bits |= DESELECT_CALDAC_BIT(i);
- outw_p(cal2_bits, devpriv->dac + DACALIBRATION2);
+ outw_p(cal2_bits, dev->iobase + DACALIBRATION2);
/* tell eeprom we want to read */
cb_pcidda_serial_out(dev, read_instruction, instruction_length);
@@ -446,7 +228,7 @@
/* deactivate eeprom */
cal2_bits &= ~SELECT_EEPROM_BIT;
- outw_p(cal2_bits, devpriv->dac + DACALIBRATION2);
+ outw_p(cal2_bits, dev->iobase + DACALIBRATION2);
return value;
}
@@ -456,7 +238,6 @@
unsigned int caldac, unsigned int channel,
unsigned int value)
{
- struct cb_pcidda_private *devpriv = dev->private;
unsigned int cal2_bits;
unsigned int i;
/* caldacs use 3 bit channel specification */
@@ -479,72 +260,10 @@
cal2_bits |= DESELECT_CALDAC_BIT(i);
/* activate the caldac we want */
cal2_bits &= ~DESELECT_CALDAC_BIT(caldac);
- outw_p(cal2_bits, devpriv->dac + DACALIBRATION2);
+ outw_p(cal2_bits, dev->iobase + DACALIBRATION2);
/* deactivate caldac */
cal2_bits |= DESELECT_CALDAC_BIT(caldac);
- outw_p(cal2_bits, devpriv->dac + DACALIBRATION2);
-}
-
-/* returns caldac that calibrates given analog out channel */
-static unsigned int caldac_number(unsigned int channel)
-{
- return channel / 2;
-}
-
-/* returns caldac channel that provides fine gain for given ao channel */
-static unsigned int fine_gain_channel(unsigned int ao_channel)
-{
- return 4 * (ao_channel % 2);
-}
-
-/* returns caldac channel that provides coarse gain for given ao channel */
-static unsigned int coarse_gain_channel(unsigned int ao_channel)
-{
- return 1 + 4 * (ao_channel % 2);
-}
-
-/* returns caldac channel that provides coarse offset for given ao channel */
-static unsigned int coarse_offset_channel(unsigned int ao_channel)
-{
- return 2 + 4 * (ao_channel % 2);
-}
-
-/* returns caldac channel that provides fine offset for given ao channel */
-static unsigned int fine_offset_channel(unsigned int ao_channel)
-{
- return 3 + 4 * (ao_channel % 2);
-}
-
-/* returns eeprom address that provides offset for given ao channel and range */
-static unsigned int offset_eeprom_address(unsigned int ao_channel,
- unsigned int range)
-{
- return 0x7 + 2 * range + 12 * ao_channel;
-}
-
-/*
- * returns eeprom address that provides gain calibration for given ao
- * channel and range
- */
-static unsigned int gain_eeprom_address(unsigned int ao_channel,
- unsigned int range)
-{
- return 0x8 + 2 * range + 12 * ao_channel;
-}
-
-/*
- * returns upper byte of eeprom entry, which gives the coarse adjustment
- * values
- */
-static unsigned int eeprom_coarse_byte(unsigned int word)
-{
- return (word >> 8) & 0xff;
-}
-
-/* returns lower byte of eeprom entry, which gives the fine adjustment values */
-static unsigned int eeprom_fine_byte(unsigned int word)
-{
- return word & 0xff;
+ outw_p(cal2_bits, dev->iobase + DACALIBRATION2);
}
/* set caldacs to eeprom values for given channel and range */
@@ -552,85 +271,68 @@
unsigned int range)
{
struct cb_pcidda_private *devpriv = dev->private;
- unsigned int coarse_offset, fine_offset, coarse_gain, fine_gain;
+ unsigned int caldac = channel / 2; /* two caldacs per channel */
+ unsigned int chan = 4 * (channel % 2); /* caldac channel base */
+ unsigned int index = 2 * range + 12 * channel;
+ unsigned int offset;
+ unsigned int gain;
- /* remember range so we can tell when we need to readjust calibration */
+ /* save range so we can tell when we need to readjust calibration */
devpriv->ao_range[channel] = range;
- /* get values from eeprom data */
- coarse_offset =
- eeprom_coarse_byte(devpriv->eeprom_data
- [offset_eeprom_address(channel, range)]);
- fine_offset =
- eeprom_fine_byte(devpriv->eeprom_data
- [offset_eeprom_address(channel, range)]);
- coarse_gain =
- eeprom_coarse_byte(devpriv->eeprom_data
- [gain_eeprom_address(channel, range)]);
- fine_gain =
- eeprom_fine_byte(devpriv->eeprom_data
- [gain_eeprom_address(channel, range)]);
+ /* get values from eeprom data */
+ offset = devpriv->eeprom_data[0x7 + index];
+ gain = devpriv->eeprom_data[0x8 + index];
- /* set caldacs */
- cb_pcidda_write_caldac(dev, caldac_number(channel),
- coarse_offset_channel(channel), coarse_offset);
- cb_pcidda_write_caldac(dev, caldac_number(channel),
- fine_offset_channel(channel), fine_offset);
- cb_pcidda_write_caldac(dev, caldac_number(channel),
- coarse_gain_channel(channel), coarse_gain);
- cb_pcidda_write_caldac(dev, caldac_number(channel),
- fine_gain_channel(channel), fine_gain);
+ /* set caldacs */
+ cb_pcidda_write_caldac(dev, caldac, chan + CB_DDA_CALDAC_COURSE_OFFSET,
+ (offset >> 8) & 0xff);
+ cb_pcidda_write_caldac(dev, caldac, chan + CB_DDA_CALDAC_FINE_OFFSET,
+ offset & 0xff);
+ cb_pcidda_write_caldac(dev, caldac, chan + CB_DDA_CALDAC_COURSE_GAIN,
+ (gain >> 8) & 0xff);
+ cb_pcidda_write_caldac(dev, caldac, chan + CB_DDA_CALDAC_FINE_GAIN,
+ gain & 0xff);
}
-static int cb_pcidda_ao_winsn(struct comedi_device *dev,
- struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data)
+static int cb_pcidda_ao_insn_write(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
{
struct cb_pcidda_private *devpriv = dev->private;
- unsigned int command;
- unsigned int channel, range;
+ unsigned int channel = CR_CHAN(insn->chanspec);
+ unsigned int range = CR_RANGE(insn->chanspec);
+ unsigned int ctrl;
- channel = CR_CHAN(insn->chanspec);
- range = CR_RANGE(insn->chanspec);
-
- /* adjust calibration dacs if range has changed */
if (range != devpriv->ao_range[channel])
cb_pcidda_calibrate(dev, channel, range);
- /* output channel configuration */
- command = NOSU | ENABLEDAC;
+ ctrl = CB_DDA_DA_CTRL_EN | CB_DDA_DA_CTRL_DAC(channel);
- /* output channel range */
switch (range) {
case 0:
- command |= BIP | RANGE10V;
+ case 3:
+ ctrl |= CB_DDA_DA_CTRL_RANGE10V;
break;
case 1:
- command |= BIP | RANGE5V;
+ case 4:
+ ctrl |= CB_DDA_DA_CTRL_RANGE5V;
break;
case 2:
- command |= BIP | RANGE2V5;
- break;
- case 3:
- command |= UNIP | RANGE10V;
- break;
- case 4:
- command |= UNIP | RANGE5V;
- break;
case 5:
- command |= UNIP | RANGE2V5;
+ ctrl |= CB_DDA_DA_CTRL_RANGE2V5;
break;
}
- /* output channel specification */
- command |= channel << 2;
- outw(command, devpriv->dac + DACONTROL);
+ if (range > 2)
+ ctrl |= CB_DDA_DA_CTRL_UNIP;
- /* write data */
- outw(data[0], devpriv->dac + DADATA + channel * 2);
+ outw(ctrl, dev->iobase + CB_DDA_DA_CTRL_REG);
- /* return the number of samples read/written */
- return 1;
+ outw(data[0], dev->iobase + CB_DDA_DA_DATA_REG(channel));
+
+ return insn->n;
}
static const void *cb_pcidda_find_boardinfo(struct comedi_device *dev,
@@ -647,41 +349,33 @@
return NULL;
}
-static int cb_pcidda_attach_pci(struct comedi_device *dev,
- struct pci_dev *pcidev)
+static int cb_pcidda_auto_attach(struct comedi_device *dev,
+ unsigned long context_unused)
{
+ struct pci_dev *pcidev = comedi_to_pci_dev(dev);
const struct cb_pcidda_board *thisboard;
struct cb_pcidda_private *devpriv;
struct comedi_subdevice *s;
- int index;
+ unsigned long iobase_8255;
+ int i;
int ret;
- comedi_set_hw_dev(dev, &pcidev->dev);
-
thisboard = cb_pcidda_find_boardinfo(dev, pcidev);
- if (!pcidev)
+ if (!thisboard)
return -ENODEV;
dev->board_ptr = thisboard;
dev->board_name = thisboard->name;
- ret = alloc_private(dev, sizeof(*devpriv));
- if (ret)
- return ret;
- devpriv = dev->private;
+ devpriv = kzalloc(sizeof(*devpriv), GFP_KERNEL);
+ if (!devpriv)
+ return -ENOMEM;
+ dev->private = devpriv;
ret = comedi_pci_enable(pcidev, dev->board_name);
if (ret)
return ret;
-
- devpriv->digitalio = pci_resource_start(pcidev, 2);
- devpriv->dac = pci_resource_start(pcidev, 3);
- dev->iobase = devpriv->dac;
-
- if (thisboard->status == 2)
- printk
- ("WARNING: DRIVER FOR THIS BOARD NOT CHECKED WITH MANUAL. "
- "WORKS ASSUMING FULL COMPATIBILITY WITH PCI-DDA08/12. "
- "PLEASE REPORT USAGE TO <ivanmr@altavista.com>.\n");
+ dev->iobase = pci_resource_start(pcidev, 3);
+ iobase_8255 = pci_resource_start(pcidev, 2);
ret = comedi_alloc_subdevices(dev, 3);
if (ret)
@@ -693,29 +387,24 @@
s->subdev_flags = SDF_WRITABLE;
s->n_chan = thisboard->ao_chans;
s->maxdata = (1 << thisboard->ao_bits) - 1;
- s->range_table = thisboard->ranges;
- s->insn_write = cb_pcidda_ao_winsn;
+ s->range_table = &cb_pcidda_ranges;
+ s->insn_write = cb_pcidda_ao_insn_write;
- /* s->subdev_flags |= SDF_CMD_READ; */
- /* s->do_cmd = cb_pcidda_ai_cmd; */
- /* s->do_cmdtest = cb_pcidda_ai_cmdtest; */
-
- /* two 8255 digital io subdevices */
- s = &dev->subdevices[1];
- subdev_8255_init(dev, s, NULL, devpriv->digitalio);
- s = &dev->subdevices[2];
- subdev_8255_init(dev, s, NULL, devpriv->digitalio + PORT2A);
-
- dev_dbg(dev->class_dev, "eeprom:\n");
- for (index = 0; index < EEPROM_SIZE; index++) {
- devpriv->eeprom_data[index] = cb_pcidda_read_eeprom(dev, index);
- dev_dbg(dev->class_dev, "%i:0x%x\n", index,
- devpriv->eeprom_data[index]);
+ /* two 8255 digital io subdevices */
+ for (i = 0; i < 2; i++) {
+ s = &dev->subdevices[1 + i];
+ ret = subdev_8255_init(dev, s, NULL, iobase_8255 + (i * 4));
+ if (ret)
+ return ret;
}
+ /* Read the caldac eeprom data */
+ for (i = 0; i < EEPROM_SIZE; i++)
+ devpriv->eeprom_data[i] = cb_pcidda_read_eeprom(dev, i);
+
/* set calibrations dacs */
- for (index = 0; index < thisboard->ao_chans; index++)
- cb_pcidda_calibrate(dev, index, devpriv->ao_range[index]);
+ for (i = 0; i < thisboard->ao_chans; i++)
+ cb_pcidda_calibrate(dev, i, devpriv->ao_range[i]);
dev_info(dev->class_dev, "%s attached\n", dev->board_name);
@@ -739,28 +428,28 @@
static struct comedi_driver cb_pcidda_driver = {
.driver_name = "cb_pcidda",
.module = THIS_MODULE,
- .attach_pci = cb_pcidda_attach_pci,
+ .auto_attach = cb_pcidda_auto_attach,
.detach = cb_pcidda_detach,
};
-static int __devinit cb_pcidda_pci_probe(struct pci_dev *dev,
+static int cb_pcidda_pci_probe(struct pci_dev *dev,
const struct pci_device_id *ent)
{
return comedi_pci_auto_config(dev, &cb_pcidda_driver);
}
-static void __devexit cb_pcidda_pci_remove(struct pci_dev *dev)
+static void cb_pcidda_pci_remove(struct pci_dev *dev)
{
comedi_pci_auto_unconfig(dev);
}
static DEFINE_PCI_DEVICE_TABLE(cb_pcidda_pci_table) = {
- { PCI_DEVICE(PCI_VENDOR_ID_CB, 0x0020) },
- { PCI_DEVICE(PCI_VENDOR_ID_CB, 0x0021) },
- { PCI_DEVICE(PCI_VENDOR_ID_CB, 0x0022) },
- { PCI_DEVICE(PCI_VENDOR_ID_CB, 0x0023) },
- { PCI_DEVICE(PCI_VENDOR_ID_CB, 0x0024) },
- { PCI_DEVICE(PCI_VENDOR_ID_CB, 0x0025) },
+ { PCI_DEVICE(PCI_VENDOR_ID_CB, PCI_DEVICE_ID_DDA02_12) },
+ { PCI_DEVICE(PCI_VENDOR_ID_CB, PCI_DEVICE_ID_DDA04_12) },
+ { PCI_DEVICE(PCI_VENDOR_ID_CB, PCI_DEVICE_ID_DDA08_12) },
+ { PCI_DEVICE(PCI_VENDOR_ID_CB, PCI_DEVICE_ID_DDA02_16) },
+ { PCI_DEVICE(PCI_VENDOR_ID_CB, PCI_DEVICE_ID_DDA04_16) },
+ { PCI_DEVICE(PCI_VENDOR_ID_CB, PCI_DEVICE_ID_DDA08_16) },
{ 0 }
};
MODULE_DEVICE_TABLE(pci, cb_pcidda_pci_table);
@@ -769,7 +458,7 @@
.name = "cb_pcidda",
.id_table = cb_pcidda_pci_table,
.probe = cb_pcidda_pci_probe,
- .remove = __devexit_p(cb_pcidda_pci_remove),
+ .remove = cb_pcidda_pci_remove,
};
module_comedi_pci_driver(cb_pcidda_driver, cb_pcidda_pci_driver);
diff --git a/drivers/staging/comedi/drivers/cb_pcimdas.c b/drivers/staging/comedi/drivers/cb_pcimdas.c
index 9515b69..b43a5f8 100644
--- a/drivers/staging/comedi/drivers/cb_pcimdas.c
+++ b/drivers/staging/comedi/drivers/cb_pcimdas.c
@@ -51,8 +51,6 @@
/* #define CBPCIMDAS_DEBUG */
#undef CBPCIMDAS_DEBUG
-#define PCI_VENDOR_ID_COMPUTERBOARDS 0x1307
-
/* Registers for the PCIM-DAS1602/16 */
/* sizes of io regions (bytes) */
@@ -80,44 +78,6 @@
#define RESID_COUNT_H 13
#define RESID_COUNT_L 14
-/* Board description */
-struct cb_pcimdas_board {
- const char *name;
- unsigned short device_id;
- int ai_se_chans; /* Inputs in single-ended mode */
- int ai_diff_chans; /* Inputs in differential mode */
- int ai_bits; /* analog input resolution */
- int ai_speed; /* fastest conversion period in ns */
- int ao_nchan; /* number of analog out channels */
- int ao_bits; /* analogue output resolution */
- int has_ao_fifo; /* analog output has fifo */
- int ao_scan_speed; /* analog output speed for 1602 series (for a scan, not conversion) */
- int fifo_size; /* number of samples fifo can hold */
- int dio_bits; /* number of dio bits */
- int has_dio; /* has DIO */
- const struct comedi_lrange *ranges;
-};
-
-static const struct cb_pcimdas_board cb_pcimdas_boards[] = {
- {
- .name = "PCIM-DAS1602/16",
- .device_id = 0x56,
- .ai_se_chans = 16,
- .ai_diff_chans = 8,
- .ai_bits = 16,
- .ai_speed = 10000, /* ?? */
- .ao_nchan = 2,
- .ao_bits = 12,
- .has_ao_fifo = 0, /* ?? */
- .ao_scan_speed = 10000,
- /* ?? */
- .fifo_size = 1024,
- .dio_bits = 24,
- .has_dio = 1,
-/* .ranges = &cb_pcimdas_ranges, */
- },
-};
-
/*
* this structure is for data unique to this hardware driver. If
* several hardware drivers keep similar information in this structure,
@@ -140,7 +100,6 @@
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
- const struct cb_pcimdas_board *thisboard = comedi_board(dev);
struct cb_pcimdas_private *devpriv = dev->private;
int n, i;
unsigned int d;
@@ -153,9 +112,9 @@
/* check channel number */
if ((inb(devpriv->BADR3 + 2) & 0x20) == 0) /* differential mode */
- maxchans = thisboard->ai_diff_chans;
+ maxchans = s->n_chan / 2;
else
- maxchans = thisboard->ai_se_chans;
+ maxchans = s->n_chan;
if (chan > (maxchans - 1))
return -ETIMEDOUT; /* *** Wrong error code. Fixme. */
@@ -195,12 +154,7 @@
return -ETIMEDOUT;
}
/* read data */
- d = inw(dev->iobase + 0);
-
- /* mangle the data as necessary */
- /* d ^= 1<<(thisboard->ai_bits-1); // 16 bit data from ADC, so no mangle needed. */
-
- data[n] = d;
+ data[n] = inw(dev->iobase + 0);
}
/* return the number of samples read/written */
@@ -251,51 +205,21 @@
return i;
}
-static const void *cb_pcimdas_find_boardinfo(struct comedi_device *dev,
- struct pci_dev *pcidev)
+static int cb_pcimdas_auto_attach(struct comedi_device *dev,
+ unsigned long context_unused)
{
- const struct cb_pcimdas_board *thisboard;
- int i;
-
- for (i = 0; i < ARRAY_SIZE(cb_pcimdas_boards); i++) {
- thisboard = &cb_pcimdas_boards[i];
- if (thisboard->device_id == pcidev->device)
- return thisboard;
- }
- return NULL;
-}
-
-static int cb_pcimdas_attach_pci(struct comedi_device *dev,
- struct pci_dev *pcidev)
-{
- const struct cb_pcimdas_board *thisboard;
+ struct pci_dev *pcidev = comedi_to_pci_dev(dev);
struct cb_pcimdas_private *devpriv;
struct comedi_subdevice *s;
unsigned long iobase_8255;
int ret;
- comedi_set_hw_dev(dev, &pcidev->dev);
+ dev->board_name = dev->driver->driver_name;
- thisboard = cb_pcimdas_find_boardinfo(dev, pcidev);
- if (!thisboard)
- return -ENODEV;
- dev->board_ptr = thisboard;
- dev->board_name = thisboard->name;
-
- ret = alloc_private(dev, sizeof(*devpriv));
- if (ret)
- return ret;
- devpriv = dev->private;
-
- /* Warn about non-tested features */
- switch (thisboard->device_id) {
- case 0x56:
- break;
- default:
- dev_dbg(dev->class_dev, "THIS CARD IS UNSUPPORTED.\n");
- dev_dbg(dev->class_dev,
- "PLEASE REPORT USAGE TO <mocelet@sucs.org>\n");
- }
+ devpriv = kzalloc(sizeof(*devpriv), GFP_KERNEL);
+ if (!devpriv)
+ return -ENOMEM;
+ dev->private = devpriv;
ret = comedi_pci_enable(pcidev, dev->board_name);
if (ret)
@@ -323,8 +247,8 @@
/* analog input subdevice */
s->type = COMEDI_SUBD_AI;
s->subdev_flags = SDF_READABLE | SDF_GROUND;
- s->n_chan = thisboard->ai_se_chans;
- s->maxdata = (1 << thisboard->ai_bits) - 1;
+ s->n_chan = 16;
+ s->maxdata = 0xffff;
s->range_table = &range_unknown;
s->len_chanlist = 1; /* This is the maximum chanlist length that */
/* the board can handle */
@@ -334,8 +258,8 @@
/* analog output subdevice */
s->type = COMEDI_SUBD_AO;
s->subdev_flags = SDF_WRITABLE;
- s->n_chan = thisboard->ao_nchan;
- s->maxdata = 1 << thisboard->ao_bits;
+ s->n_chan = 2;
+ s->maxdata = 0xfff;
/* ranges are hardware settable, but not software readable. */
s->range_table = &range_unknown;
s->insn_write = &cb_pcimdas_ao_winsn;
@@ -343,10 +267,7 @@
s = &dev->subdevices[2];
/* digital i/o subdevice */
- if (thisboard->has_dio)
- subdev_8255_init(dev, s, NULL, iobase_8255);
- else
- s->type = COMEDI_SUBD_UNUSED;
+ subdev_8255_init(dev, s, NULL, iobase_8255);
dev_info(dev->class_dev, "%s attached\n", dev->board_name);
@@ -368,23 +289,23 @@
static struct comedi_driver cb_pcimdas_driver = {
.driver_name = "cb_pcimdas",
.module = THIS_MODULE,
- .attach_pci = cb_pcimdas_attach_pci,
+ .auto_attach = cb_pcimdas_auto_attach,
.detach = cb_pcimdas_detach,
};
-static int __devinit cb_pcimdas_pci_probe(struct pci_dev *dev,
+static int cb_pcimdas_pci_probe(struct pci_dev *dev,
const struct pci_device_id *ent)
{
return comedi_pci_auto_config(dev, &cb_pcimdas_driver);
}
-static void __devexit cb_pcimdas_pci_remove(struct pci_dev *dev)
+static void cb_pcimdas_pci_remove(struct pci_dev *dev)
{
comedi_pci_auto_unconfig(dev);
}
static DEFINE_PCI_DEVICE_TABLE(cb_pcimdas_pci_table) = {
- { PCI_DEVICE(PCI_VENDOR_ID_COMPUTERBOARDS, 0x0056) },
+ { PCI_DEVICE(PCI_VENDOR_ID_CB, 0x0056) },
{ 0 }
};
MODULE_DEVICE_TABLE(pci, cb_pcimdas_pci_table);
@@ -393,7 +314,7 @@
.name = "cb_pcimdas",
.id_table = cb_pcimdas_pci_table,
.probe = cb_pcimdas_pci_probe,
- .remove = __devexit_p(cb_pcimdas_pci_remove),
+ .remove = cb_pcimdas_pci_remove,
};
module_comedi_pci_driver(cb_pcimdas_driver, cb_pcimdas_pci_driver);
diff --git a/drivers/staging/comedi/drivers/cb_pcimdda.c b/drivers/staging/comedi/drivers/cb_pcimdda.c
index ba9f059..699b84f 100644
--- a/drivers/staging/comedi/drivers/cb_pcimdda.c
+++ b/drivers/staging/comedi/drivers/cb_pcimdda.c
@@ -84,7 +84,6 @@
#include "8255.h"
/* device ids of the cards we support -- currently only 1 card supported */
-#define PCI_VENDOR_ID_COMPUTERBOARDS 0x1307
#define PCI_ID_PCIM_DDA06_16 0x0053
/*
@@ -152,20 +151,20 @@
return insn->n;
}
-static int cb_pcimdda_attach_pci(struct comedi_device *dev,
- struct pci_dev *pcidev)
+static int cb_pcimdda_auto_attach(struct comedi_device *dev,
+ unsigned long context_unused)
{
+ struct pci_dev *pcidev = comedi_to_pci_dev(dev);
struct cb_pcimdda_private *devpriv;
struct comedi_subdevice *s;
int ret;
- comedi_set_hw_dev(dev, &pcidev->dev);
dev->board_name = dev->driver->driver_name;
- ret = alloc_private(dev, sizeof(*devpriv));
- if (ret)
- return ret;
- devpriv = dev->private;
+ devpriv = kzalloc(sizeof(*devpriv), GFP_KERNEL);
+ if (!devpriv)
+ return -ENOMEM;
+ dev->private = devpriv;
ret = comedi_pci_enable(pcidev, dev->board_name);
if (ret)
@@ -213,23 +212,23 @@
static struct comedi_driver cb_pcimdda_driver = {
.driver_name = "cb_pcimdda",
.module = THIS_MODULE,
- .attach_pci = cb_pcimdda_attach_pci,
+ .auto_attach = cb_pcimdda_auto_attach,
.detach = cb_pcimdda_detach,
};
-static int __devinit cb_pcimdda_pci_probe(struct pci_dev *dev,
+static int cb_pcimdda_pci_probe(struct pci_dev *dev,
const struct pci_device_id *ent)
{
return comedi_pci_auto_config(dev, &cb_pcimdda_driver);
}
-static void __devexit cb_pcimdda_pci_remove(struct pci_dev *dev)
+static void cb_pcimdda_pci_remove(struct pci_dev *dev)
{
comedi_pci_auto_unconfig(dev);
}
static DEFINE_PCI_DEVICE_TABLE(cb_pcimdda_pci_table) = {
- { PCI_DEVICE(PCI_VENDOR_ID_COMPUTERBOARDS, PCI_ID_PCIM_DDA06_16) },
+ { PCI_DEVICE(PCI_VENDOR_ID_CB, PCI_ID_PCIM_DDA06_16) },
{ 0 }
};
MODULE_DEVICE_TABLE(pci, cb_pcimdda_pci_table);
@@ -238,7 +237,7 @@
.name = "cb_pcimdda",
.id_table = cb_pcimdda_pci_table,
.probe = cb_pcimdda_pci_probe,
- .remove = __devexit_p(cb_pcimdda_pci_remove),
+ .remove = cb_pcimdda_pci_remove,
};
module_comedi_pci_driver(cb_pcimdda_driver, cb_pcimdda_driver_pci_driver);
diff --git a/drivers/staging/comedi/drivers/comedi_bond.c b/drivers/staging/comedi/drivers/comedi_bond.c
index 5c768bc..3151599 100644
--- a/drivers/staging/comedi/drivers/comedi_bond.c
+++ b/drivers/staging/comedi/drivers/comedi_bond.c
@@ -304,10 +304,10 @@
struct comedi_subdevice *s;
int ret;
- ret = alloc_private(dev, sizeof(*devpriv));
- if (ret)
- return ret;
- devpriv = dev->private;
+ devpriv = kzalloc(sizeof(*devpriv), GFP_KERNEL);
+ if (!devpriv)
+ return -ENOMEM;
+ dev->private = devpriv;
/*
* Setup our bonding from config params.. sets up our private struct..
diff --git a/drivers/staging/comedi/drivers/comedi_fc.c b/drivers/staging/comedi/drivers/comedi_fc.c
index 63be619..8372829 100644
--- a/drivers/staging/comedi/drivers/comedi_fc.c
+++ b/drivers/staging/comedi/drivers/comedi_fc.c
@@ -53,7 +53,7 @@
retval = comedi_buf_write_alloc(async, num_bytes);
if (retval != num_bytes) {
- printk(KERN_WARNING "comedi: buffer overrun\n");
+ dev_warn(subd->device->class_dev, "comedi: buffer overrun\n");
async->events |= COMEDI_CB_OVERFLOW;
return 0;
}
diff --git a/drivers/staging/comedi/drivers/comedi_fc.h b/drivers/staging/comedi/drivers/comedi_fc.h
index 94481c6..31afab7 100644
--- a/drivers/staging/comedi/drivers/comedi_fc.h
+++ b/drivers/staging/comedi/drivers/comedi_fc.h
@@ -105,4 +105,48 @@
return 0;
}
+/**
+ * cfc_check_trigger_arg_is() - trivially validate a trigger argument
+ * @arg: pointer to the trigger arg to validate
+ * @val: the value the argument should be
+ */
+static inline int cfc_check_trigger_arg_is(unsigned int *arg, unsigned int val)
+{
+ if (*arg != val) {
+ *arg = val;
+ return -EINVAL;
+ }
+ return 0;
+}
+
+/**
+ * cfc_check_trigger_arg_min() - trivially validate a trigger argument
+ * @arg: pointer to the trigger arg to validate
+ * @val: the minimum value the argument should be
+ */
+static inline int cfc_check_trigger_arg_min(unsigned int *arg,
+ unsigned int val)
+{
+ if (*arg < val) {
+ *arg = val;
+ return -EINVAL;
+ }
+ return 0;
+}
+
+/**
+ * cfc_check_trigger_arg_max() - trivially validate a trigger argument
+ * @arg: pointer to the trigger arg to validate
+ * @val: the maximum value the argument should be
+ */
+static inline int cfc_check_trigger_arg_max(unsigned int *arg,
+ unsigned int val)
+{
+ if (*arg > val) {
+ *arg = val;
+ return -EINVAL;
+ }
+ return 0;
+}
+
#endif /* _COMEDI_FC_H */
diff --git a/drivers/staging/comedi/drivers/comedi_parport.c b/drivers/staging/comedi/drivers/comedi_parport.c
index 22ef942..76d59dc 100644
--- a/drivers/staging/comedi/drivers/comedi_parport.c
+++ b/drivers/staging/comedi/drivers/comedi_parport.c
@@ -196,28 +196,13 @@
if (err)
return 2;
- /* step 3: */
+ /* Step 3: check if arguments are trivially valid */
- if (cmd->start_arg != 0) {
- cmd->start_arg = 0;
- err++;
- }
- if (cmd->scan_begin_arg != 0) {
- cmd->scan_begin_arg = 0;
- err++;
- }
- if (cmd->convert_arg != 0) {
- cmd->convert_arg = 0;
- err++;
- }
- if (cmd->scan_end_arg != 1) {
- cmd->scan_end_arg = 1;
- err++;
- }
- if (cmd->stop_arg != 0) {
- cmd->stop_arg = 0;
- err++;
- }
+ err |= cfc_check_trigger_arg_is(&cmd->start_arg, 0);
+ err |= cfc_check_trigger_arg_is(&cmd->scan_begin_arg, 0);
+ err |= cfc_check_trigger_arg_is(&cmd->convert_arg, 0);
+ err |= cfc_check_trigger_arg_is(&cmd->scan_end_arg, 1);
+ err |= cfc_check_trigger_arg_is(&cmd->stop_arg, 0);
if (err)
return 3;
@@ -305,10 +290,10 @@
if (ret)
return ret;
- ret = alloc_private(dev, sizeof(*devpriv));
- if (ret < 0)
- return ret;
- devpriv = dev->private;
+ devpriv = kzalloc(sizeof(*devpriv), GFP_KERNEL);
+ if (!devpriv)
+ return -ENOMEM;
+ dev->private = devpriv;
s = &dev->subdevices[0];
s->type = COMEDI_SUBD_DIO;
diff --git a/drivers/staging/comedi/drivers/comedi_test.c b/drivers/staging/comedi/drivers/comedi_test.c
index 7817def..fb3d093 100644
--- a/drivers/staging/comedi/drivers/comedi_test.c
+++ b/drivers/staging/comedi/drivers/comedi_test.c
@@ -252,55 +252,28 @@
if (err)
return 2;
- /* step 3: make sure arguments are trivially compatible */
+ /* Step 3: check if arguments are trivially valid */
- if (cmd->start_arg != 0) {
- cmd->start_arg = 0;
- err++;
- }
- if (cmd->convert_src == TRIG_NOW) {
- if (cmd->convert_arg != 0) {
- cmd->convert_arg = 0;
- err++;
- }
- }
+ err |= cfc_check_trigger_arg_is(&cmd->start_arg, 0);
+
+ if (cmd->convert_src == TRIG_NOW)
+ err |= cfc_check_trigger_arg_is(&cmd->convert_arg, 0);
+
if (cmd->scan_begin_src == TRIG_TIMER) {
- if (cmd->scan_begin_arg < nano_per_micro) {
- cmd->scan_begin_arg = nano_per_micro;
- err++;
- }
- if (cmd->convert_src == TRIG_TIMER &&
- cmd->scan_begin_arg <
- cmd->convert_arg * cmd->chanlist_len) {
- cmd->scan_begin_arg =
- cmd->convert_arg * cmd->chanlist_len;
- err++;
- }
- }
- /*
- * XXX these checks are generic and should go in core if not there
- * already
- */
- if (!cmd->chanlist_len) {
- cmd->chanlist_len = 1;
- err++;
- }
- if (cmd->scan_end_arg != cmd->chanlist_len) {
- cmd->scan_end_arg = cmd->chanlist_len;
- err++;
+ err |= cfc_check_trigger_arg_min(&cmd->scan_begin_arg,
+ nano_per_micro);
+ if (cmd->convert_src == TRIG_TIMER)
+ err |= cfc_check_trigger_arg_min(&cmd->scan_begin_arg,
+ cmd->convert_arg * cmd->chanlist_len);
}
- if (cmd->stop_src == TRIG_COUNT) {
- if (!cmd->stop_arg) {
- cmd->stop_arg = 1;
- err++;
- }
- } else { /* TRIG_NONE */
- if (cmd->stop_arg != 0) {
- cmd->stop_arg = 0;
- err++;
- }
- }
+ err |= cfc_check_trigger_arg_min(&cmd->chanlist_len, 1);
+ err |= cfc_check_trigger_arg_is(&cmd->scan_end_arg, cmd->chanlist_len);
+
+ if (cmd->stop_src == TRIG_COUNT)
+ err |= cfc_check_trigger_arg_min(&cmd->stop_arg, 1);
+ else /* TRIG_NONE */
+ err |= cfc_check_trigger_arg_is(&cmd->stop_arg, 0);
if (err)
return 3;
@@ -414,10 +387,10 @@
dev->board_name = dev->driver->driver_name;
- ret = alloc_private(dev, sizeof(*devpriv));
- if (ret < 0)
- return ret;
- devpriv = dev->private;
+ devpriv = kzalloc(sizeof(*devpriv), GFP_KERNEL);
+ if (!devpriv)
+ return -ENOMEM;
+ dev->private = devpriv;
/* set default amplitude and period */
if (amplitude <= 0)
diff --git a/drivers/staging/comedi/drivers/contec_pci_dio.c b/drivers/staging/comedi/drivers/contec_pci_dio.c
index 178a6a4..1a18fa3 100644
--- a/drivers/staging/comedi/drivers/contec_pci_dio.c
+++ b/drivers/staging/comedi/drivers/contec_pci_dio.c
@@ -68,14 +68,13 @@
return insn->n;
}
-static int contec_attach_pci(struct comedi_device *dev,
- struct pci_dev *pcidev)
+static int contec_auto_attach(struct comedi_device *dev,
+ unsigned long context_unused)
{
+ struct pci_dev *pcidev = comedi_to_pci_dev(dev);
struct comedi_subdevice *s;
int ret;
- comedi_set_hw_dev(dev, &pcidev->dev);
-
dev->board_name = dev->driver->driver_name;
ret = comedi_pci_enable(pcidev, dev->board_name);
@@ -121,17 +120,17 @@
static struct comedi_driver contec_pci_dio_driver = {
.driver_name = "contec_pci_dio",
.module = THIS_MODULE,
- .attach_pci = contec_attach_pci,
+ .auto_attach = contec_auto_attach,
.detach = contec_detach,
};
-static int __devinit contec_pci_dio_pci_probe(struct pci_dev *dev,
+static int contec_pci_dio_pci_probe(struct pci_dev *dev,
const struct pci_device_id *ent)
{
return comedi_pci_auto_config(dev, &contec_pci_dio_driver);
}
-static void __devexit contec_pci_dio_pci_remove(struct pci_dev *dev)
+static void contec_pci_dio_pci_remove(struct pci_dev *dev)
{
comedi_pci_auto_unconfig(dev);
}
@@ -146,7 +145,7 @@
.name = "contec_pci_dio",
.id_table = contec_pci_dio_pci_table,
.probe = contec_pci_dio_pci_probe,
- .remove = __devexit_p(contec_pci_dio_pci_remove),
+ .remove = contec_pci_dio_pci_remove,
};
module_comedi_pci_driver(contec_pci_dio_driver, contec_pci_dio_pci_driver);
diff --git a/drivers/staging/comedi/drivers/daqboard2000.c b/drivers/staging/comedi/drivers/daqboard2000.c
index d13c8c5..992e557 100644
--- a/drivers/staging/comedi/drivers/daqboard2000.c
+++ b/drivers/staging/comedi/drivers/daqboard2000.c
@@ -117,8 +117,6 @@
#define DAQBOARD2000_FIRMWARE "daqboard2000_firmware.bin"
-#define PCI_VENDOR_ID_IOTECH 0x1616
-
#define DAQBOARD2000_SUBSYSTEM_IDS2 0x0002 /* Daqboard/2000 - 2 Dacs */
#define DAQBOARD2000_SUBSYSTEM_IDS4 0x0004 /* Daqboard/2000 - 4 Dacs */
@@ -690,26 +688,25 @@
return NULL;
}
-static int daqboard2000_attach_pci(struct comedi_device *dev,
- struct pci_dev *pcidev)
+static int daqboard2000_auto_attach(struct comedi_device *dev,
+ unsigned long context_unused)
{
+ struct pci_dev *pcidev = comedi_to_pci_dev(dev);
const struct daq200_boardtype *board;
struct daqboard2000_private *devpriv;
struct comedi_subdevice *s;
int result;
- comedi_set_hw_dev(dev, &pcidev->dev);
-
board = daqboard2000_find_boardinfo(dev, pcidev);
if (!board)
return -ENODEV;
dev->board_ptr = board;
dev->board_name = board->name;
- result = alloc_private(dev, sizeof(*devpriv));
- if (result < 0)
+ devpriv = kzalloc(sizeof(*devpriv), GFP_KERNEL);
+ if (!devpriv)
return -ENOMEM;
- devpriv = dev->private;
+ dev->private = devpriv;
result = comedi_pci_enable(pcidev, dev->driver->driver_name);
if (result < 0)
@@ -792,17 +789,17 @@
static struct comedi_driver daqboard2000_driver = {
.driver_name = "daqboard2000",
.module = THIS_MODULE,
- .attach_pci = daqboard2000_attach_pci,
+ .auto_attach = daqboard2000_auto_attach,
.detach = daqboard2000_detach,
};
-static int __devinit daqboard2000_pci_probe(struct pci_dev *dev,
+static int daqboard2000_pci_probe(struct pci_dev *dev,
const struct pci_device_id *ent)
{
return comedi_pci_auto_config(dev, &daqboard2000_driver);
}
-static void __devexit daqboard2000_pci_remove(struct pci_dev *dev)
+static void daqboard2000_pci_remove(struct pci_dev *dev)
{
comedi_pci_auto_unconfig(dev);
}
@@ -817,7 +814,7 @@
.name = "daqboard2000",
.id_table = daqboard2000_pci_table,
.probe = daqboard2000_pci_probe,
- .remove = __devexit_p(daqboard2000_pci_remove),
+ .remove = daqboard2000_pci_remove,
};
module_comedi_pci_driver(daqboard2000_driver, daqboard2000_pci_driver);
diff --git a/drivers/staging/comedi/drivers/das08.c b/drivers/staging/comedi/drivers/das08.c
index c304528..b15e058 100644
--- a/drivers/staging/comedi/drivers/das08.c
+++ b/drivers/staging/comedi/drivers/das08.c
@@ -65,7 +65,6 @@
#define DO_PCI IS_ENABLED(CONFIG_COMEDI_DAS08_PCI)
#define DO_COMEDI_DRIVER_REGISTER (DO_ISA || DO_PCI)
-#define PCI_VENDOR_ID_COMPUTERBOARDS 0x1307
#define PCI_DEVICE_ID_PCIDAS08 0x29
#define PCIDAS08_SIZE 0x54
@@ -775,24 +774,29 @@
}
/* only called in the PCI probe path, via comedi_pci_auto_config() */
-static int __devinit __maybe_unused
-das08_attach_pci(struct comedi_device *dev, struct pci_dev *pdev)
+static int __maybe_unused
+das08_auto_attach(struct comedi_device *dev, unsigned long context_unused)
{
+ struct pci_dev *pdev;
+ struct das08_private_struct *devpriv;
unsigned long iobase;
- int ret;
if (!DO_PCI)
return -EINVAL;
- ret = alloc_private(dev, sizeof(struct das08_private_struct));
- if (ret < 0)
- return ret;
+
+ pdev = comedi_to_pci_dev(dev);
+ devpriv = kzalloc(sizeof(*devpriv), GFP_KERNEL);
+ if (!devpriv)
+ return -ENOMEM;
+ dev->private = devpriv;
+
dev_info(dev->class_dev, "attach pci %s\n", pci_name(pdev));
dev->board_ptr = das08_find_pci_board(pdev);
if (dev->board_ptr == NULL) {
dev_err(dev->class_dev, "BUG! cannot determine board type!\n");
return -EINVAL;
}
- comedi_set_hw_dev(dev, &pdev->dev);
+
/* enable PCI device and reserve I/O spaces */
if (comedi_pci_enable(pdev, dev->driver->driver_name)) {
dev_err(dev->class_dev,
@@ -809,13 +813,12 @@
{
const struct das08_board_struct *thisboard = comedi_board(dev);
struct das08_private_struct *devpriv;
- int ret;
unsigned long iobase;
- ret = alloc_private(dev, sizeof(struct das08_private_struct));
- if (ret < 0)
- return ret;
- devpriv = dev->private;
+ devpriv = kzalloc(sizeof(*devpriv), GFP_KERNEL);
+ if (!devpriv)
+ return -ENOMEM;
+ dev->private = devpriv;
dev_info(dev->class_dev, "attach\n");
if (is_pci_board(thisboard)) {
@@ -866,7 +869,7 @@
.driver_name = DRV_NAME,
.module = THIS_MODULE,
.attach = das08_attach,
- .attach_pci = das08_attach_pci,
+ .auto_attach = das08_auto_attach,
.detach = das08_detach,
.board_name = &das08_boards[0].name,
.num_names = sizeof(das08_boards) / sizeof(struct das08_board_struct),
@@ -876,19 +879,19 @@
#if DO_PCI
static DEFINE_PCI_DEVICE_TABLE(das08_pci_table) = {
- { PCI_DEVICE(PCI_VENDOR_ID_COMPUTERBOARDS, PCI_DEVICE_ID_PCIDAS08) },
+ { PCI_DEVICE(PCI_VENDOR_ID_CB, PCI_DEVICE_ID_PCIDAS08) },
{0}
};
MODULE_DEVICE_TABLE(pci, das08_pci_table);
-static int __devinit das08_pci_probe(struct pci_dev *dev,
+static int das08_pci_probe(struct pci_dev *dev,
const struct pci_device_id *ent)
{
return comedi_pci_auto_config(dev, &das08_driver);
}
-static void __devexit das08_pci_remove(struct pci_dev *dev)
+static void das08_pci_remove(struct pci_dev *dev)
{
comedi_pci_auto_unconfig(dev);
}
@@ -897,7 +900,7 @@
.id_table = das08_pci_table,
.name = DRV_NAME,
.probe = &das08_pci_probe,
- .remove = __devexit_p(&das08_pci_remove)
+ .remove = &das08_pci_remove
};
#endif /* DO_PCI */
diff --git a/drivers/staging/comedi/drivers/das08_cs.c b/drivers/staging/comedi/drivers/das08_cs.c
index e4c91e6..0242623 100644
--- a/drivers/staging/comedi/drivers/das08_cs.c
+++ b/drivers/staging/comedi/drivers/das08_cs.c
@@ -90,13 +90,14 @@
struct comedi_devconfig *it)
{
const struct das08_board_struct *thisboard = comedi_board(dev);
- int ret;
+ struct das08_private_struct *devpriv;
unsigned long iobase;
struct pcmcia_device *link = cur_dev; /* XXX hack */
- ret = alloc_private(dev, sizeof(struct das08_private_struct));
- if (ret < 0)
- return ret;
+ devpriv = kzalloc(sizeof(*devpriv), GFP_KERNEL);
+ if (!devpriv)
+ return -ENOMEM;
+ dev->private = devpriv;
dev_info(dev->class_dev, "das08_cs: attach\n");
/* deal with a pci board */
diff --git a/drivers/staging/comedi/drivers/das16.c b/drivers/staging/comedi/drivers/das16.c
index fcb8a32..b159f44 100644
--- a/drivers/staging/comedi/drivers/das16.c
+++ b/drivers/staging/comedi/drivers/das16.c
@@ -392,12 +392,12 @@
volatile short timer_running;
volatile short timer_mode; /* true if using timer mode */
};
-#define devpriv ((struct das16_private_struct *)(dev->private))
static int das16_cmd_test(struct comedi_device *dev, struct comedi_subdevice *s,
struct comedi_cmd *cmd)
{
const struct das16_board *board = comedi_board(dev);
+ struct das16_private_struct *devpriv = dev->private;
int err = 0, tmp;
int gain, start_chan, i;
int mask;
@@ -442,46 +442,27 @@
if (err)
return 2;
- /* step 3: make sure arguments are trivially compatible */
- if (cmd->start_arg != 0) {
- cmd->start_arg = 0;
- err++;
- }
+ /* Step 3: check if arguments are trivially valid */
- if (cmd->scan_begin_src == TRIG_FOLLOW) {
- /* internal trigger */
- if (cmd->scan_begin_arg != 0) {
- cmd->scan_begin_arg = 0;
- err++;
- }
- }
+ err |= cfc_check_trigger_arg_is(&cmd->start_arg, 0);
- if (cmd->scan_end_arg != cmd->chanlist_len) {
- cmd->scan_end_arg = cmd->chanlist_len;
- err++;
- }
- /* check against maximum frequency */
- if (cmd->scan_begin_src == TRIG_TIMER) {
- if (cmd->scan_begin_arg <
- board->ai_speed * cmd->chanlist_len) {
- cmd->scan_begin_arg =
- board->ai_speed * cmd->chanlist_len;
- err++;
- }
- }
- if (cmd->convert_src == TRIG_TIMER) {
- if (cmd->convert_arg < board->ai_speed) {
- cmd->convert_arg = board->ai_speed;
- err++;
- }
- }
+ if (cmd->scan_begin_src == TRIG_FOLLOW) /* internal trigger */
+ err |= cfc_check_trigger_arg_is(&cmd->scan_begin_arg, 0);
- if (cmd->stop_src == TRIG_NONE) {
- if (cmd->stop_arg != 0) {
- cmd->stop_arg = 0;
- err++;
- }
- }
+ err |= cfc_check_trigger_arg_is(&cmd->scan_end_arg, cmd->chanlist_len);
+
+ /* check against maximum frequency */
+ if (cmd->scan_begin_src == TRIG_TIMER)
+ err |= cfc_check_trigger_arg_min(&cmd->scan_begin_arg,
+ board->ai_speed * cmd->chanlist_len);
+
+ if (cmd->convert_src == TRIG_TIMER)
+ err |= cfc_check_trigger_arg_min(&cmd->convert_arg,
+ board->ai_speed);
+
+ if (cmd->stop_src == TRIG_NONE)
+ err |= cfc_check_trigger_arg_is(&cmd->stop_arg, 0);
+
if (err)
return 3;
@@ -540,6 +521,7 @@
static unsigned int das16_suggest_transfer_size(struct comedi_device *dev,
const struct comedi_cmd *cmd)
{
+ struct das16_private_struct *devpriv = dev->private;
unsigned int size;
unsigned int freq;
@@ -581,6 +563,8 @@
static unsigned int das16_set_pacer(struct comedi_device *dev, unsigned int ns,
int rounding_flags)
{
+ struct das16_private_struct *devpriv = dev->private;
+
i8253_cascade_ns_to_timer_2div(devpriv->clockbase, &(devpriv->divisor1),
&(devpriv->divisor2), &ns,
rounding_flags & TRIG_ROUND_MASK);
@@ -595,6 +579,7 @@
static int das16_cmd_exec(struct comedi_device *dev, struct comedi_subdevice *s)
{
const struct das16_board *board = comedi_board(dev);
+ struct das16_private_struct *devpriv = dev->private;
struct comedi_async *async = s->async;
struct comedi_cmd *cmd = &async->cmd;
unsigned int byte;
@@ -701,6 +686,7 @@
static int das16_cancel(struct comedi_device *dev, struct comedi_subdevice *s)
{
const struct das16_board *board = comedi_board(dev);
+ struct das16_private_struct *devpriv = dev->private;
unsigned long flags;
spin_lock_irqsave(&dev->spinlock, flags);
@@ -738,6 +724,7 @@
struct comedi_insn *insn, unsigned int *data)
{
const struct das16_board *board = comedi_board(dev);
+ struct das16_private_struct *devpriv = dev->private;
int i, n;
int range;
int chan;
@@ -848,10 +835,12 @@
*/
static int disable_dma_on_even(struct comedi_device *dev)
{
+ struct das16_private_struct *devpriv = dev->private;
int residue;
int i;
static const int disable_limit = 100;
static const int enable_timeout = 100;
+
disable_dma(devpriv->dma_chan);
residue = get_dma_residue(devpriv->dma_chan);
for (i = 0; i < disable_limit && (residue % 2); ++i) {
@@ -877,6 +866,7 @@
static void das16_interrupt(struct comedi_device *dev)
{
const struct das16_board *board = comedi_board(dev);
+ struct das16_private_struct *devpriv = dev->private;
unsigned long dma_flags, spin_flags;
struct comedi_subdevice *s = dev->read_subdev;
struct comedi_async *async;
@@ -973,6 +963,7 @@
static void das16_timer_interrupt(unsigned long arg)
{
struct comedi_device *dev = (struct comedi_device *)arg;
+ struct das16_private_struct *devpriv = dev->private;
das16_interrupt(dev);
@@ -1001,6 +992,7 @@
static int das16_probe(struct comedi_device *dev, struct comedi_devconfig *it)
{
const struct das16_board *board = comedi_board(dev);
+ struct das16_private_struct *devpriv = dev->private;
int status;
int diobits;
@@ -1035,6 +1027,7 @@
static int das1600_mode_detect(struct comedi_device *dev)
{
+ struct das16_private_struct *devpriv = dev->private;
int status = 0;
status = inb(dev->iobase + DAS1600_STATUS_B);
@@ -1080,6 +1073,7 @@
static int das16_attach(struct comedi_device *dev, struct comedi_devconfig *it)
{
const struct das16_board *board = comedi_board(dev);
+ struct das16_private_struct *devpriv;
struct comedi_subdevice *s;
int ret;
unsigned int irq;
@@ -1114,9 +1108,10 @@
}
}
- ret = alloc_private(dev, sizeof(struct das16_private_struct));
- if (ret < 0)
- return ret;
+ devpriv = kzalloc(sizeof(*devpriv), GFP_KERNEL);
+ if (!devpriv)
+ return -ENOMEM;
+ dev->private = devpriv;
if (board->size < 0x400) {
printk(" 0x%04lx-0x%04lx\n", iobase, iobase + board->size);
@@ -1353,6 +1348,7 @@
static void das16_detach(struct comedi_device *dev)
{
const struct das16_board *board = comedi_board(dev);
+ struct das16_private_struct *devpriv = dev->private;
das16_reset(dev);
if (dev->subdevices)
diff --git a/drivers/staging/comedi/drivers/das16m1.c b/drivers/staging/comedi/drivers/das16m1.c
index 3f87d75..b0a861a 100644
--- a/drivers/staging/comedi/drivers/das16m1.c
+++ b/drivers/staging/comedi/drivers/das16m1.c
@@ -28,7 +28,7 @@
Driver: das16m1
Description: CIO-DAS16/M1
Author: Frank Mori Hess <fmhess@users.sourceforge.net>
-Devices: [Measurement Computing] CIO-DAS16/M1 (cio-das16/m1)
+Devices: [Measurement Computing] CIO-DAS16/M1 (das16m1)
Status: works
This driver supports a single board - the CIO-DAS16/M1.
@@ -132,11 +132,6 @@
}
};
-struct das16m1_board {
- const char *name;
- unsigned int ai_speed;
-};
-
struct das16m1_private_struct {
unsigned int control_state;
volatile unsigned int adc_count; /* number of samples completed */
@@ -149,7 +144,6 @@
unsigned int divisor1; /* divides master clock to obtain conversion speed */
unsigned int divisor2; /* divides master clock to obtain conversion speed */
};
-#define devpriv ((struct das16m1_private_struct *)(dev->private))
static inline short munge_sample(short data)
{
@@ -167,7 +161,7 @@
static int das16m1_cmd_test(struct comedi_device *dev,
struct comedi_subdevice *s, struct comedi_cmd *cmd)
{
- const struct das16m1_board *board = comedi_board(dev);
+ struct das16m1_private_struct *devpriv = dev->private;
unsigned int err = 0, tmp, i;
/* Step 1 : check if triggers are trivially valid */
@@ -192,40 +186,23 @@
if (err)
return 2;
- /* step 3: make sure arguments are trivially compatible */
- if (cmd->start_arg != 0) {
- cmd->start_arg = 0;
- err++;
- }
+ /* Step 3: check if arguments are trivially valid */
- if (cmd->scan_begin_src == TRIG_FOLLOW) {
- /* internal trigger */
- if (cmd->scan_begin_arg != 0) {
- cmd->scan_begin_arg = 0;
- err++;
- }
- }
+ err |= cfc_check_trigger_arg_is(&cmd->start_arg, 0);
- if (cmd->convert_src == TRIG_TIMER) {
- if (cmd->convert_arg < board->ai_speed) {
- cmd->convert_arg = board->ai_speed;
- err++;
- }
- }
+ if (cmd->scan_begin_src == TRIG_FOLLOW) /* internal trigger */
+ err |= cfc_check_trigger_arg_is(&cmd->scan_begin_arg, 0);
- if (cmd->scan_end_arg != cmd->chanlist_len) {
- cmd->scan_end_arg = cmd->chanlist_len;
- err++;
- }
+ if (cmd->convert_src == TRIG_TIMER)
+ err |= cfc_check_trigger_arg_min(&cmd->convert_arg, 1000);
+
+ err |= cfc_check_trigger_arg_is(&cmd->scan_end_arg, cmd->chanlist_len);
if (cmd->stop_src == TRIG_COUNT) {
/* any count is allowed */
} else {
/* TRIG_NONE */
- if (cmd->stop_arg != 0) {
- cmd->stop_arg = 0;
- err++;
- }
+ err |= cfc_check_trigger_arg_is(&cmd->stop_arg, 0);
}
if (err)
@@ -277,6 +254,8 @@
static unsigned int das16m1_set_pacer(struct comedi_device *dev,
unsigned int ns, int rounding_flags)
{
+ struct das16m1_private_struct *devpriv = dev->private;
+
i8253_cascade_ns_to_timer_2div(DAS16M1_XTAL, &(devpriv->divisor1),
&(devpriv->divisor2), &ns,
rounding_flags & TRIG_ROUND_MASK);
@@ -293,6 +272,7 @@
static int das16m1_cmd_exec(struct comedi_device *dev,
struct comedi_subdevice *s)
{
+ struct das16m1_private_struct *devpriv = dev->private;
struct comedi_async *async = s->async;
struct comedi_cmd *cmd = &async->cmd;
unsigned int byte, i;
@@ -356,6 +336,8 @@
static int das16m1_cancel(struct comedi_device *dev, struct comedi_subdevice *s)
{
+ struct das16m1_private_struct *devpriv = dev->private;
+
devpriv->control_state &= ~INTE & ~PACER_MASK;
outb(devpriv->control_state, dev->iobase + DAS16M1_INTR_CONTROL);
@@ -366,6 +348,7 @@
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
+ struct das16m1_private_struct *devpriv = dev->private;
int i, n;
int byte;
const int timeout = 1000;
@@ -417,6 +400,7 @@
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
+ struct das16m1_private_struct *devpriv = dev->private;
unsigned int wbits;
/* only set bits that have been masked */
@@ -436,6 +420,7 @@
static void das16m1_handler(struct comedi_device *dev, unsigned int status)
{
+ struct das16m1_private_struct *devpriv = dev->private;
struct comedi_subdevice *s;
struct comedi_async *async;
struct comedi_cmd *cmd;
@@ -582,26 +567,27 @@
static int das16m1_attach(struct comedi_device *dev,
struct comedi_devconfig *it)
{
- const struct das16m1_board *board = comedi_board(dev);
+ struct das16m1_private_struct *devpriv;
struct comedi_subdevice *s;
int ret;
unsigned int irq;
unsigned long iobase;
+ dev->board_name = dev->driver->driver_name;
+
iobase = it->options[0];
- ret = alloc_private(dev, sizeof(struct das16m1_private_struct));
- if (ret < 0)
- return ret;
+ devpriv = kzalloc(sizeof(*devpriv), GFP_KERNEL);
+ if (!devpriv)
+ return -ENOMEM;
+ dev->private = devpriv;
- dev->board_name = board->name;
-
- if (!request_region(iobase, DAS16M1_SIZE, dev->driver->driver_name)) {
+ if (!request_region(iobase, DAS16M1_SIZE, dev->board_name)) {
comedi_error(dev, "I/O port conflict\n");
return -EIO;
}
if (!request_region(iobase + DAS16M1_82C55, DAS16M1_SIZE2,
- dev->driver->driver_name)) {
+ dev->board_name)) {
release_region(iobase, DAS16M1_SIZE);
comedi_error(dev, "I/O port conflict\n");
return -EIO;
@@ -698,21 +684,11 @@
}
}
-static const struct das16m1_board das16m1_boards[] = {
- {
- .name = "cio-das16/m1", /* CIO-DAS16_M1.pdf */
- .ai_speed = 1000, /* 1MHz max speed */
- },
-};
-
static struct comedi_driver das16m1_driver = {
.driver_name = "das16m1",
.module = THIS_MODULE,
.attach = das16m1_attach,
.detach = das16m1_detach,
- .board_name = &das16m1_boards[0].name,
- .num_names = ARRAY_SIZE(das16m1_boards),
- .offset = sizeof(das16m1_boards[0]),
};
module_comedi_driver(das16m1_driver);
diff --git a/drivers/staging/comedi/drivers/das1800.c b/drivers/staging/comedi/drivers/das1800.c
index 2555f32..7900f95 100644
--- a/drivers/staging/comedi/drivers/das1800.c
+++ b/drivers/staging/comedi/drivers/das1800.c
@@ -454,8 +454,6 @@
short ao_update_bits; /* remembers the last write to the 'update' dac */
};
-#define devpriv ((struct das1800_private *)dev->private)
-
/* analog out range for boards with basic analog out */
static const struct comedi_lrange range_ao_1 = {
1,
@@ -501,6 +499,7 @@
static void das1800_handle_fifo_half_full(struct comedi_device *dev,
struct comedi_subdevice *s)
{
+ struct das1800_private *devpriv = dev->private;
int numPoints = 0; /* number of points to read */
struct comedi_cmd *cmd = &s->async->cmd;
@@ -520,6 +519,7 @@
static void das1800_handle_fifo_not_empty(struct comedi_device *dev,
struct comedi_subdevice *s)
{
+ struct das1800_private *devpriv = dev->private;
short dpnt;
int unipolar;
struct comedi_cmd *cmd = &s->async->cmd;
@@ -548,6 +548,7 @@
struct comedi_subdevice *s,
unsigned int channel, uint16_t *buffer)
{
+ struct das1800_private *devpriv = dev->private;
unsigned int num_bytes, num_samples;
struct comedi_cmd *cmd = &s->async->cmd;
@@ -578,6 +579,7 @@
static void das1800_flush_dma(struct comedi_device *dev,
struct comedi_subdevice *s)
{
+ struct das1800_private *devpriv = dev->private;
unsigned long flags;
const int dual_dma = devpriv->irq_dma_bits & DMA_DUAL;
@@ -609,6 +611,7 @@
static void das1800_handle_dma(struct comedi_device *dev,
struct comedi_subdevice *s, unsigned int status)
{
+ struct das1800_private *devpriv = dev->private;
unsigned long flags;
const int dual_dma = devpriv->irq_dma_bits & DMA_DUAL;
@@ -643,6 +646,8 @@
static int das1800_cancel(struct comedi_device *dev, struct comedi_subdevice *s)
{
+ struct das1800_private *devpriv = dev->private;
+
outb(0x0, dev->iobase + DAS1800_STATUS); /* disable conversions */
outb(0x0, dev->iobase + DAS1800_CONTROL_B); /* disable interrupts and dma */
outb(0x0, dev->iobase + DAS1800_CONTROL_A); /* disable and clear fifo and stop triggering */
@@ -656,6 +661,7 @@
/* the guts of the interrupt handler, that is shared with das1800_ai_poll */
static void das1800_ai_handler(struct comedi_device *dev)
{
+ struct das1800_private *devpriv = dev->private;
struct comedi_subdevice *s = &dev->subdevices[0];
struct comedi_async *async = s->async;
struct comedi_cmd *cmd = &async->cmd;
@@ -783,6 +789,7 @@
struct comedi_subdevice *s,
struct comedi_cmd *cmd)
{
+ struct das1800_private *devpriv = dev->private;
int err = 0;
unsigned int tmp_arg;
int i;
@@ -817,39 +824,23 @@
if (err)
return 2;
- /* step 3: make sure arguments are trivially compatible */
+ /* Step 3: check if arguments are trivially valid */
- if (cmd->start_arg != 0) {
- cmd->start_arg = 0;
- err++;
- }
- if (cmd->convert_src == TRIG_TIMER) {
- if (cmd->convert_arg < thisboard->ai_speed) {
- cmd->convert_arg = thisboard->ai_speed;
- err++;
- }
- }
- if (!cmd->chanlist_len) {
- cmd->chanlist_len = 1;
- err++;
- }
- if (cmd->scan_end_arg != cmd->chanlist_len) {
- cmd->scan_end_arg = cmd->chanlist_len;
- err++;
- }
+ err |= cfc_check_trigger_arg_is(&cmd->start_arg, 0);
+
+ if (cmd->convert_src == TRIG_TIMER)
+ err |= cfc_check_trigger_arg_min(&cmd->convert_arg,
+ thisboard->ai_speed);
+
+ err |= cfc_check_trigger_arg_min(&cmd->chanlist_len, 1);
+ err |= cfc_check_trigger_arg_is(&cmd->scan_end_arg, cmd->chanlist_len);
switch (cmd->stop_src) {
case TRIG_COUNT:
- if (!cmd->stop_arg) {
- cmd->stop_arg = 1;
- err++;
- }
+ err |= cfc_check_trigger_arg_min(&cmd->stop_arg, 1);
break;
case TRIG_NONE:
- if (cmd->stop_arg != 0) {
- cmd->stop_arg = 0;
- err++;
- }
+ err |= cfc_check_trigger_arg_is(&cmd->stop_arg, 0);
break;
default:
break;
@@ -1006,6 +997,7 @@
/* loads counters with divisor1, divisor2 from private structure */
static int das1800_set_frequency(struct comedi_device *dev)
{
+ struct das1800_private *devpriv = dev->private;
int err = 0;
/* counter 1, mode 2 */
@@ -1026,6 +1018,7 @@
static int setup_counters(struct comedi_device *dev,
const struct comedi_cmd *cmd)
{
+ struct das1800_private *devpriv = dev->private;
unsigned int period;
/* setup cascaded counters for conversion/scan frequency */
@@ -1107,6 +1100,7 @@
/* sets up dma */
static void setup_dma(struct comedi_device *dev, const struct comedi_cmd *cmd)
{
+ struct das1800_private *devpriv = dev->private;
unsigned long lock_flags;
const int dual_dma = devpriv->irq_dma_bits & DMA_DUAL;
@@ -1174,6 +1168,7 @@
static int das1800_ai_do_cmd(struct comedi_device *dev,
struct comedi_subdevice *s)
{
+ struct das1800_private *devpriv = dev->private;
int ret;
int control_a, control_c;
struct comedi_async *async = s->async;
@@ -1300,6 +1295,7 @@
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
+ struct das1800_private *devpriv = dev->private;
int chan = CR_CHAN(insn->chanspec);
/* int range = CR_RANGE(insn->chanspec); */
int update_chan = thisboard->ao_n_chan - 1;
@@ -1342,6 +1338,7 @@
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
+ struct das1800_private *devpriv = dev->private;
unsigned int wbits;
/* only set bits that have been masked */
@@ -1361,6 +1358,7 @@
static int das1800_init_dma(struct comedi_device *dev, unsigned int dma0,
unsigned int dma1)
{
+ struct das1800_private *devpriv = dev->private;
unsigned long flags;
/* need an irq to do dma */
@@ -1518,6 +1516,7 @@
static int das1800_attach(struct comedi_device *dev,
struct comedi_devconfig *it)
{
+ struct das1800_private *devpriv;
struct comedi_subdevice *s;
unsigned long iobase = it->options[0];
unsigned int irq = it->options[1];
@@ -1527,9 +1526,10 @@
int board;
int retval;
- /* allocate and initialize dev->private */
- if (alloc_private(dev, sizeof(struct das1800_private)) < 0)
+ devpriv = kzalloc(sizeof(*devpriv), GFP_KERNEL);
+ if (!devpriv)
return -ENOMEM;
+ dev->private = devpriv;
printk(KERN_DEBUG "comedi%d: %s: io 0x%lx", dev->minor,
dev->driver->driver_name, iobase);
@@ -1699,11 +1699,13 @@
static void das1800_detach(struct comedi_device *dev)
{
+ struct das1800_private *devpriv = dev->private;
+
if (dev->iobase)
release_region(dev->iobase, DAS1800_SIZE);
if (dev->irq)
free_irq(dev->irq, dev);
- if (dev->private) {
+ if (devpriv) {
if (devpriv->iobase2)
release_region(devpriv->iobase2, DAS1800_SIZE);
if (devpriv->dma0)
diff --git a/drivers/staging/comedi/drivers/das6402.c b/drivers/staging/comedi/drivers/das6402.c
index e134c46..2efddb8 100644
--- a/drivers/staging/comedi/drivers/das6402.c
+++ b/drivers/staging/comedi/drivers/das6402.c
@@ -104,7 +104,6 @@
int das6402_ignoreirq;
};
-#define devpriv ((struct das6402_private *)dev->private)
static void das6402_ai_fifo_dregs(struct comedi_device *dev,
struct comedi_subdevice *s)
@@ -152,6 +151,7 @@
static irqreturn_t intr_handler(int irq, void *d)
{
struct comedi_device *dev = d;
+ struct das6402_private *devpriv = dev->private;
struct comedi_subdevice *s = &dev->subdevices[0];
if (!dev->attached || devpriv->das6402_ignoreirq) {
@@ -196,6 +196,8 @@
static int das6402_ai_cancel(struct comedi_device *dev,
struct comedi_subdevice *s)
{
+ struct das6402_private *devpriv = dev->private;
+
/*
* This function should reset the board from whatever condition it
* is in (i.e., acquiring data), to a non-active state.
@@ -217,6 +219,8 @@
static int das6402_ai_mode2(struct comedi_device *dev,
struct comedi_subdevice *s, comedi_trig * it)
{
+ struct das6402_private *devpriv = dev->private;
+
devpriv->das6402_ignoreirq = 1;
dev_dbg(dev->class_dev, "Starting acquisition\n");
outb_p(0x03, dev->iobase + 10); /* enable external trigging */
@@ -236,6 +240,7 @@
static int board_init(struct comedi_device *dev)
{
+ struct das6402_private *devpriv = dev->private;
BYTE b;
devpriv->das6402_ignoreirq = 1;
@@ -277,6 +282,7 @@
static int das6402_attach(struct comedi_device *dev,
struct comedi_devconfig *it)
{
+ struct das6402_private *devpriv;
unsigned int irq;
unsigned long iobase;
int ret;
@@ -303,9 +309,11 @@
return ret;
dev->irq = irq;
- ret = alloc_private(dev, sizeof(struct das6402_private));
- if (ret < 0)
- return ret;
+
+ devpriv = kzalloc(sizeof(*devpriv), GFP_KERNEL);
+ if (!devpriv)
+ return -ENOMEM;
+ dev->private = devpriv;
ret = comedi_alloc_subdevices(dev, 1);
if (ret)
diff --git a/drivers/staging/comedi/drivers/das800.c b/drivers/staging/comedi/drivers/das800.c
index 215deac..38f625b 100644
--- a/drivers/staging/comedi/drivers/das800.c
+++ b/drivers/staging/comedi/drivers/das800.c
@@ -241,8 +241,6 @@
volatile int do_bits; /* digital output bits */
};
-#define devpriv ((struct das800_private *)dev->private)
-
static int das800_attach(struct comedi_device *dev,
struct comedi_devconfig *it);
static void das800_detach(struct comedi_device *dev);
@@ -344,22 +342,7 @@
return -1;
}
-/*
- * A convenient macro that defines init_module() and cleanup_module(),
- * as necessary.
- */
-static int __init driver_das800_init_module(void)
-{
- return comedi_driver_register(&driver_das800);
-}
-
-static void __exit driver_das800_cleanup_module(void)
-{
- comedi_driver_unregister(&driver_das800);
-}
-
-module_init(driver_das800_init_module);
-module_exit(driver_das800_cleanup_module);
+module_comedi_driver(driver_das800);
/* interrupt service routine */
static irqreturn_t das800_interrupt(int irq, void *d)
@@ -367,6 +350,7 @@
short i; /* loop index */
short dataPoint = 0;
struct comedi_device *dev = d;
+ struct das800_private *devpriv = dev->private;
struct comedi_subdevice *s = dev->read_subdev; /* analog input subdevice */
struct comedi_async *async;
int status;
@@ -461,6 +445,7 @@
static int das800_attach(struct comedi_device *dev, struct comedi_devconfig *it)
{
+ struct das800_private *devpriv;
struct comedi_subdevice *s;
unsigned long iobase = it->options[0];
unsigned int irq = it->options[1];
@@ -472,9 +457,10 @@
if (irq)
dev_dbg(dev->class_dev, "irq %u\n", irq);
- /* allocate and initialize dev->private */
- if (alloc_private(dev, sizeof(struct das800_private)) < 0)
+ devpriv = kzalloc(sizeof(*devpriv), GFP_KERNEL);
+ if (!devpriv)
return -ENOMEM;
+ dev->private = devpriv;
if (iobase == 0) {
dev_err(dev->class_dev,
@@ -569,6 +555,8 @@
static int das800_cancel(struct comedi_device *dev, struct comedi_subdevice *s)
{
+ struct das800_private *devpriv = dev->private;
+
devpriv->forever = 0;
devpriv->count = 0;
disable_das800(dev);
@@ -578,7 +566,9 @@
/* enable_das800 makes the card start taking hardware triggered conversions */
static void enable_das800(struct comedi_device *dev)
{
+ struct das800_private *devpriv = dev->private;
unsigned long irq_flags;
+
spin_lock_irqsave(&dev->spinlock, irq_flags);
/* enable fifo-half full interrupts for cio-das802/16 */
if (thisboard->resolution == 16)
@@ -604,6 +594,7 @@
struct comedi_subdevice *s,
struct comedi_cmd *cmd)
{
+ struct das800_private *devpriv = dev->private;
int err = 0;
int tmp;
int gain, startChan;
@@ -631,37 +622,21 @@
if (err)
return 2;
- /* step 3: make sure arguments are trivially compatible */
+ /* Step 3: check if arguments are trivially valid */
- if (cmd->start_arg != 0) {
- cmd->start_arg = 0;
- err++;
- }
- if (cmd->convert_src == TRIG_TIMER) {
- if (cmd->convert_arg < thisboard->ai_speed) {
- cmd->convert_arg = thisboard->ai_speed;
- err++;
- }
- }
- if (!cmd->chanlist_len) {
- cmd->chanlist_len = 1;
- err++;
- }
- if (cmd->scan_end_arg != cmd->chanlist_len) {
- cmd->scan_end_arg = cmd->chanlist_len;
- err++;
- }
- if (cmd->stop_src == TRIG_COUNT) {
- if (!cmd->stop_arg) {
- cmd->stop_arg = 1;
- err++;
- }
- } else { /* TRIG_NONE */
- if (cmd->stop_arg != 0) {
- cmd->stop_arg = 0;
- err++;
- }
- }
+ err |= cfc_check_trigger_arg_is(&cmd->start_arg, 0);
+
+ if (cmd->convert_src == TRIG_TIMER)
+ err |= cfc_check_trigger_arg_min(&cmd->convert_arg,
+ thisboard->ai_speed);
+
+ err |= cfc_check_trigger_arg_min(&cmd->chanlist_len, 1);
+ err |= cfc_check_trigger_arg_is(&cmd->scan_end_arg, cmd->chanlist_len);
+
+ if (cmd->stop_src == TRIG_COUNT)
+ err |= cfc_check_trigger_arg_min(&cmd->stop_arg, 1);
+ else /* TRIG_NONE */
+ err |= cfc_check_trigger_arg_is(&cmd->stop_arg, 0);
if (err)
return 3;
@@ -710,6 +685,7 @@
static int das800_ai_do_cmd(struct comedi_device *dev,
struct comedi_subdevice *s)
{
+ struct das800_private *devpriv = dev->private;
int startChan, endChan, scan, gain;
int conv_bits;
unsigned long irq_flags;
@@ -793,6 +769,7 @@
struct comedi_subdevice *s, struct comedi_insn *insn,
unsigned int *data)
{
+ struct das800_private *devpriv = dev->private;
int i, n;
int chan;
int range;
@@ -862,6 +839,7 @@
struct comedi_subdevice *s, struct comedi_insn *insn,
unsigned int *data)
{
+ struct das800_private *devpriv = dev->private;
int wbits;
unsigned long irq_flags;
@@ -885,6 +863,7 @@
/* loads counters with divisor1, divisor2 from private structure */
static int das800_set_frequency(struct comedi_device *dev)
{
+ struct das800_private *devpriv = dev->private;
int err = 0;
if (i8254_load(dev->iobase + DAS800_8254, 0, 1, devpriv->divisor1, 2))
diff --git a/drivers/staging/comedi/drivers/dmm32at.c b/drivers/staging/comedi/drivers/dmm32at.c
index 4d5c33c..9e21241 100644
--- a/drivers/staging/comedi/drivers/dmm32at.c
+++ b/drivers/staging/comedi/drivers/dmm32at.c
@@ -158,10 +158,6 @@
}
};
-struct dmm32at_board {
- const char *name;
-};
-
struct dmm32at_private {
int data;
@@ -284,33 +280,25 @@
if (err)
return 2;
- /* step 3: make sure arguments are trivially compatible */
+ /* Step 3: check if arguments are trivially valid */
- if (cmd->start_arg != 0) {
- cmd->start_arg = 0;
- err++;
- }
+ err |= cfc_check_trigger_arg_is(&cmd->start_arg, 0);
+
#define MAX_SCAN_SPEED 1000000 /* in nanoseconds */
#define MIN_SCAN_SPEED 1000000000 /* in nanoseconds */
if (cmd->scan_begin_src == TRIG_TIMER) {
- if (cmd->scan_begin_arg < MAX_SCAN_SPEED) {
- cmd->scan_begin_arg = MAX_SCAN_SPEED;
- err++;
- }
- if (cmd->scan_begin_arg > MIN_SCAN_SPEED) {
- cmd->scan_begin_arg = MIN_SCAN_SPEED;
- err++;
- }
+ err |= cfc_check_trigger_arg_min(&cmd->scan_begin_arg,
+ MAX_SCAN_SPEED);
+ err |= cfc_check_trigger_arg_max(&cmd->scan_begin_arg,
+ MIN_SCAN_SPEED);
} else {
/* external trigger */
/* should be level/edge, hi/lo specification here */
/* should specify multiple external triggers */
- if (cmd->scan_begin_arg > 9) {
- cmd->scan_begin_arg = 9;
- err++;
- }
+ err |= cfc_check_trigger_arg_max(&cmd->scan_begin_arg, 9);
}
+
if (cmd->convert_src == TRIG_TIMER) {
if (cmd->convert_arg >= 17500)
cmd->convert_arg = 20000;
@@ -320,35 +308,20 @@
cmd->convert_arg = 10000;
else
cmd->convert_arg = 5000;
-
} else {
/* external trigger */
/* see above */
- if (cmd->convert_arg > 9) {
- cmd->convert_arg = 9;
- err++;
- }
+ err |= cfc_check_trigger_arg_max(&cmd->convert_arg, 9);
}
- if (cmd->scan_end_arg != cmd->chanlist_len) {
- cmd->scan_end_arg = cmd->chanlist_len;
- err++;
- }
+ err |= cfc_check_trigger_arg_is(&cmd->scan_end_arg, cmd->chanlist_len);
+
if (cmd->stop_src == TRIG_COUNT) {
- if (cmd->stop_arg > 0xfffffff0) {
- cmd->stop_arg = 0xfffffff0;
- err++;
- }
- if (cmd->stop_arg == 0) {
- cmd->stop_arg = 1;
- err++;
- }
+ err |= cfc_check_trigger_arg_max(&cmd->stop_arg, 0xfffffff0);
+ err |= cfc_check_trigger_arg_min(&cmd->stop_arg, 1);
} else {
/* TRIG_NONE */
- if (cmd->stop_arg != 0) {
- cmd->stop_arg = 0;
- err++;
- }
+ err |= cfc_check_trigger_arg_is(&cmd->stop_arg, 0);
}
if (err)
@@ -718,7 +691,6 @@
static int dmm32at_attach(struct comedi_device *dev,
struct comedi_devconfig *it)
{
- const struct dmm32at_board *board = comedi_board(dev);
struct dmm32at_private *devpriv;
int ret;
struct comedi_subdevice *s;
@@ -726,6 +698,8 @@
unsigned long iobase;
unsigned int irq;
+ dev->board_name = dev->driver->driver_name;
+
iobase = it->options[0];
irq = it->options[1];
@@ -734,7 +708,7 @@
iobase, irq);
/* register address space */
- if (!request_region(iobase, DMM32AT_MEMSIZE, board->name)) {
+ if (!request_region(iobase, DMM32AT_MEMSIZE, dev->board_name)) {
printk(KERN_ERR "comedi%d: dmm32at: I/O port conflict\n",
dev->minor);
return -EIO;
@@ -788,7 +762,7 @@
/* board is there, register interrupt */
if (irq) {
- ret = request_irq(irq, dmm32at_isr, 0, board->name, dev);
+ ret = request_irq(irq, dmm32at_isr, 0, dev->board_name, dev);
if (ret < 0) {
printk(KERN_ERR "dmm32at: irq conflict\n");
return ret;
@@ -796,11 +770,10 @@
dev->irq = irq;
}
- dev->board_name = board->name;
-
- if (alloc_private(dev, sizeof(*devpriv)) < 0)
+ devpriv = kzalloc(sizeof(*devpriv), GFP_KERNEL);
+ if (!devpriv)
return -ENOMEM;
- devpriv = dev->private;
+ dev->private = devpriv;
ret = comedi_alloc_subdevices(dev, 3);
if (ret)
@@ -867,20 +840,11 @@
release_region(dev->iobase, DMM32AT_MEMSIZE);
}
-static const struct dmm32at_board dmm32at_boards[] = {
- {
- .name = "dmm32at",
- },
-};
-
static struct comedi_driver dmm32at_driver = {
.driver_name = "dmm32at",
.module = THIS_MODULE,
.attach = dmm32at_attach,
.detach = dmm32at_detach,
- .board_name = &dmm32at_boards[0].name,
- .offset = sizeof(struct dmm32at_board),
- .num_names = ARRAY_SIZE(dmm32at_boards),
};
module_comedi_driver(dmm32at_driver);
diff --git a/drivers/staging/comedi/drivers/dt2801.c b/drivers/staging/comedi/drivers/dt2801.c
index c59a652..f6942aa 100644
--- a/drivers/staging/comedi/drivers/dt2801.c
+++ b/drivers/staging/comedi/drivers/dt2801.c
@@ -233,8 +233,6 @@
unsigned int ao_readback[2];
};
-#define devpriv ((struct dt2801_private *)dev->private)
-
/* These are the low-level routines:
writecommand: write a command to the board
writedata: write data byte
@@ -508,6 +506,8 @@
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
+ struct dt2801_private *devpriv = dev->private;
+
data[0] = devpriv->ao_readback[CR_CHAN(insn->chanspec)];
return 1;
@@ -517,6 +517,8 @@
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
+ struct dt2801_private *devpriv = dev->private;
+
dt2801_writecmd(dev, DT_C_WRITE_DAIM);
dt2801_writedata(dev, CR_CHAN(insn->chanspec));
dt2801_writedata2(dev, data[0]);
@@ -590,6 +592,7 @@
*/
static int dt2801_attach(struct comedi_device *dev, struct comedi_devconfig *it)
{
+ struct dt2801_private *devpriv;
struct comedi_subdevice *s;
unsigned long iobase;
int board_code, type;
@@ -630,9 +633,10 @@
if (ret)
goto out;
- ret = alloc_private(dev, sizeof(struct dt2801_private));
- if (ret < 0)
- return ret;
+ devpriv = kzalloc(sizeof(*devpriv), GFP_KERNEL);
+ if (!devpriv)
+ return -ENOMEM;
+ dev->private = devpriv;
dev->board_name = boardtype.name;
diff --git a/drivers/staging/comedi/drivers/dt2811.c b/drivers/staging/comedi/drivers/dt2811.c
index d3a8c1a..f90ecf4 100644
--- a/drivers/staging/comedi/drivers/dt2811.c
+++ b/drivers/staging/comedi/drivers/dt2811.c
@@ -226,8 +226,6 @@
unsigned int ao_readback[2];
};
-#define devpriv ((struct dt2811_private *)dev->private)
-
static const struct comedi_lrange *dac_range_types[] = {
&range_bipolar5,
&range_bipolar2_5,
@@ -242,6 +240,7 @@
int lo, hi;
int data;
struct comedi_device *dev = d;
+ struct dt2811_private *devpriv = dev->private;
if (!dev->attached) {
comedi_error(dev, "spurious interrupt");
@@ -318,6 +317,7 @@
static int dt2811_ao_insn(struct comedi_device *dev, struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
+ struct dt2811_private *devpriv = dev->private;
int i;
int chan;
@@ -337,6 +337,7 @@
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
+ struct dt2811_private *devpriv = dev->private;
int i;
int chan;
@@ -397,6 +398,7 @@
/* long flags; */
const struct dt2811_board *board = comedi_board(dev);
+ struct dt2811_private *devpriv;
int ret;
struct comedi_subdevice *s;
unsigned long iobase;
@@ -463,9 +465,10 @@
if (ret)
return ret;
- ret = alloc_private(dev, sizeof(struct dt2811_private));
- if (ret < 0)
- return ret;
+ devpriv = kzalloc(sizeof(*devpriv), GFP_KERNEL);
+ if (!devpriv)
+ return -ENOMEM;
+ dev->private = devpriv;
switch (it->options[2]) {
case 0:
diff --git a/drivers/staging/comedi/drivers/dt2814.c b/drivers/staging/comedi/drivers/dt2814.c
index 064a8f2..e520dba 100644
--- a/drivers/staging/comedi/drivers/dt2814.c
+++ b/drivers/staging/comedi/drivers/dt2814.c
@@ -68,8 +68,6 @@
int curadchan;
};
-#define devpriv ((struct dt2814_private *)dev->private)
-
#define DT2814_TIMEOUT 10
#define DT2814_MAX_SPEED 100000 /* Arbitrary 10 khz limit */
@@ -151,36 +149,20 @@
if (err)
return 2;
- /* step 3: make sure arguments are trivially compatible */
+ /* Step 3: check if arguments are trivially valid */
- if (cmd->start_arg != 0) {
- cmd->start_arg = 0;
- err++;
- }
- if (cmd->scan_begin_arg > 1000000000) {
- cmd->scan_begin_arg = 1000000000;
- err++;
- }
- if (cmd->scan_begin_arg < DT2814_MAX_SPEED) {
- cmd->scan_begin_arg = DT2814_MAX_SPEED;
- err++;
- }
- if (cmd->scan_end_arg != cmd->chanlist_len) {
- cmd->scan_end_arg = cmd->chanlist_len;
- err++;
- }
- if (cmd->stop_src == TRIG_COUNT) {
- if (cmd->stop_arg < 2) {
- cmd->stop_arg = 2;
- err++;
- }
- } else {
- /* TRIG_NONE */
- if (cmd->stop_arg != 0) {
- cmd->stop_arg = 0;
- err++;
- }
- }
+ err |= cfc_check_trigger_arg_is(&cmd->start_arg, 0);
+
+ err |= cfc_check_trigger_arg_max(&cmd->scan_begin_arg, 1000000000);
+ err |= cfc_check_trigger_arg_min(&cmd->scan_begin_arg,
+ DT2814_MAX_SPEED);
+
+ err |= cfc_check_trigger_arg_is(&cmd->scan_end_arg, cmd->chanlist_len);
+
+ if (cmd->stop_src == TRIG_COUNT)
+ err |= cfc_check_trigger_arg_min(&cmd->stop_arg, 2);
+ else /* TRIG_NONE */
+ err |= cfc_check_trigger_arg_is(&cmd->stop_arg, 0);
if (err)
return 3;
@@ -200,6 +182,7 @@
static int dt2814_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
{
+ struct dt2814_private *devpriv = dev->private;
struct comedi_cmd *cmd = &s->async->cmd;
int chan;
int trigvar;
@@ -221,6 +204,7 @@
{
int lo, hi;
struct comedi_device *dev = d;
+ struct dt2814_private *devpriv = dev->private;
struct comedi_subdevice *s;
int data;
@@ -258,6 +242,7 @@
static int dt2814_attach(struct comedi_device *dev, struct comedi_devconfig *it)
{
+ struct dt2814_private *devpriv;
int i, irq;
int ret;
struct comedi_subdevice *s;
@@ -324,9 +309,10 @@
if (ret)
return ret;
- ret = alloc_private(dev, sizeof(struct dt2814_private));
- if (ret < 0)
- return ret;
+ devpriv = kzalloc(sizeof(*devpriv), GFP_KERNEL);
+ if (!devpriv)
+ return -ENOMEM;
+ dev->private = devpriv;
s = &dev->subdevices[0];
dev->read_subdev = s;
diff --git a/drivers/staging/comedi/drivers/dt2815.c b/drivers/staging/comedi/drivers/dt2815.c
index b9692ef..1e0cfe4 100644
--- a/drivers/staging/comedi/drivers/dt2815.c
+++ b/drivers/staging/comedi/drivers/dt2815.c
@@ -78,8 +78,6 @@
unsigned int ao_readback[8];
};
-#define devpriv ((struct dt2815_private *)dev->private)
-
static int dt2815_wait_for_status(struct comedi_device *dev, int status)
{
int i;
@@ -95,6 +93,7 @@
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
+ struct dt2815_private *devpriv = dev->private;
int i;
int chan = CR_CHAN(insn->chanspec);
@@ -107,6 +106,7 @@
static int dt2815_ao_insn(struct comedi_device *dev, struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
+ struct dt2815_private *devpriv = dev->private;
int i;
int chan = CR_CHAN(insn->chanspec);
unsigned int status;
@@ -162,6 +162,7 @@
static int dt2815_attach(struct comedi_device *dev, struct comedi_devconfig *it)
{
+ struct dt2815_private *devpriv;
struct comedi_subdevice *s;
int i;
const struct comedi_lrange *current_range_type, *voltage_range_type;
@@ -182,8 +183,10 @@
if (ret)
return ret;
- if (alloc_private(dev, sizeof(struct dt2815_private)) < 0)
+ devpriv = kzalloc(sizeof(*devpriv), GFP_KERNEL);
+ if (!devpriv)
return -ENOMEM;
+ dev->private = devpriv;
s = &dev->subdevices[0];
/* ao subdevice */
diff --git a/drivers/staging/comedi/drivers/dt282x.c b/drivers/staging/comedi/drivers/dt282x.c
index 78d3407..122d980 100644
--- a/drivers/staging/comedi/drivers/dt282x.c
+++ b/drivers/staging/comedi/drivers/dt282x.c
@@ -248,7 +248,6 @@
int dma_dir;
};
-#define devpriv ((struct dt282x_private *)dev->private)
#define boardtype (*(const struct dt282x_board *)dev->board_ptr)
/*
@@ -290,6 +289,7 @@
static void dt282x_munge(struct comedi_device *dev, short *buf,
unsigned int nbytes)
{
+ struct dt282x_private *devpriv = dev->private;
unsigned int i;
unsigned short mask = (1 << boardtype.adbits) - 1;
unsigned short sign = 1 << (boardtype.adbits - 1);
@@ -309,6 +309,7 @@
static void dt282x_ao_dma_interrupt(struct comedi_device *dev)
{
+ struct dt282x_private *devpriv = dev->private;
void *ptr;
int size;
int i;
@@ -341,6 +342,7 @@
static void dt282x_ai_dma_interrupt(struct comedi_device *dev)
{
+ struct dt282x_private *devpriv = dev->private;
void *ptr;
int size;
int i;
@@ -393,6 +395,7 @@
static int prep_ai_dma(struct comedi_device *dev, int dma_index, int n)
{
+ struct dt282x_private *devpriv = dev->private;
int dma_chan;
unsigned long dma_ptr;
unsigned long flags;
@@ -424,6 +427,7 @@
static int prep_ao_dma(struct comedi_device *dev, int dma_index, int n)
{
+ struct dt282x_private *devpriv = dev->private;
int dma_chan;
unsigned long dma_ptr;
unsigned long flags;
@@ -447,6 +451,7 @@
static irqreturn_t dt282x_interrupt(int irq, void *d)
{
struct comedi_device *dev = d;
+ struct dt282x_private *devpriv = dev->private;
struct comedi_subdevice *s;
struct comedi_subdevice *s_ao;
unsigned int supcsr, adcsr, dacsr;
@@ -525,6 +530,7 @@
static void dt282x_load_changain(struct comedi_device *dev, int n,
unsigned int *chanlist)
{
+ struct dt282x_private *devpriv = dev->private;
unsigned int i;
unsigned int chan, range;
@@ -548,6 +554,7 @@
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
+ struct dt282x_private *devpriv = dev->private;
int i;
/* XXX should we really be enabling the ad clock here? */
@@ -604,52 +611,30 @@
if (err)
return 2;
- /* step 3: make sure arguments are trivially compatible */
+ /* Step 3: check if arguments are trivially valid */
- if (cmd->start_arg != 0) {
- cmd->start_arg = 0;
- err++;
- }
+ err |= cfc_check_trigger_arg_is(&cmd->start_arg, 0);
+
if (cmd->scan_begin_src == TRIG_FOLLOW) {
/* internal trigger */
- if (cmd->scan_begin_arg != 0) {
- cmd->scan_begin_arg = 0;
- err++;
- }
+ err |= cfc_check_trigger_arg_is(&cmd->scan_begin_arg, 0);
} else {
/* external trigger */
/* should be level/edge, hi/lo specification here */
- if (cmd->scan_begin_arg != 0) {
- cmd->scan_begin_arg = 0;
- err++;
- }
+ err |= cfc_check_trigger_arg_is(&cmd->scan_begin_arg, 0);
}
- if (cmd->convert_arg < 4000) {
- /* XXX board dependent */
- cmd->convert_arg = 4000;
- err++;
- }
+
+ err |= cfc_check_trigger_arg_min(&cmd->convert_arg, 4000);
+
#define SLOWEST_TIMER (250*(1<<15)*255)
- if (cmd->convert_arg > SLOWEST_TIMER) {
- cmd->convert_arg = SLOWEST_TIMER;
- err++;
- }
- if (cmd->convert_arg < board->ai_speed) {
- cmd->convert_arg = board->ai_speed;
- err++;
- }
- if (cmd->scan_end_arg != cmd->chanlist_len) {
- cmd->scan_end_arg = cmd->chanlist_len;
- err++;
- }
+ err |= cfc_check_trigger_arg_max(&cmd->convert_arg, SLOWEST_TIMER);
+ err |= cfc_check_trigger_arg_min(&cmd->convert_arg, board->ai_speed);
+ err |= cfc_check_trigger_arg_is(&cmd->scan_end_arg, cmd->chanlist_len);
+
if (cmd->stop_src == TRIG_COUNT) {
/* any count is allowed */
- } else {
- /* TRIG_NONE */
- if (cmd->stop_arg != 0) {
- cmd->stop_arg = 0;
- err++;
- }
+ } else { /* TRIG_NONE */
+ err |= cfc_check_trigger_arg_is(&cmd->stop_arg, 0);
}
if (err)
@@ -671,6 +656,7 @@
static int dt282x_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
{
const struct dt282x_board *board = comedi_board(dev);
+ struct dt282x_private *devpriv = dev->private;
struct comedi_cmd *cmd = &s->async->cmd;
int timer;
@@ -733,6 +719,8 @@
static void dt282x_disable_dma(struct comedi_device *dev)
{
+ struct dt282x_private *devpriv = dev->private;
+
if (devpriv->usedma) {
disable_dma(devpriv->dma[0].chan);
disable_dma(devpriv->dma[1].chan);
@@ -742,6 +730,8 @@
static int dt282x_ai_cancel(struct comedi_device *dev,
struct comedi_subdevice *s)
{
+ struct dt282x_private *devpriv = dev->private;
+
dt282x_disable_dma(dev);
devpriv->adcsr = 0;
@@ -794,6 +784,8 @@
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
+ struct dt282x_private *devpriv = dev->private;
+
data[0] = devpriv->ao[CR_CHAN(insn->chanspec)];
return 1;
@@ -803,6 +795,7 @@
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
+ struct dt282x_private *devpriv = dev->private;
short d;
unsigned int chan;
@@ -859,33 +852,17 @@
if (err)
return 2;
- /* step 3: make sure arguments are trivially compatible */
+ /* Step 3: check if arguments are trivially valid */
- if (cmd->start_arg != 0) {
- cmd->start_arg = 0;
- err++;
- }
- if (cmd->scan_begin_arg < 5000 /* XXX unknown */) {
- cmd->scan_begin_arg = 5000;
- err++;
- }
- if (cmd->convert_arg != 0) {
- cmd->convert_arg = 0;
- err++;
- }
- if (cmd->scan_end_arg > 2) {
- /* XXX chanlist stuff? */
- cmd->scan_end_arg = 2;
- err++;
- }
+ err |= cfc_check_trigger_arg_is(&cmd->start_arg, 0);
+ err |= cfc_check_trigger_arg_min(&cmd->scan_begin_arg, 5000);
+ err |= cfc_check_trigger_arg_is(&cmd->convert_arg, 0);
+ err |= cfc_check_trigger_arg_max(&cmd->scan_end_arg, 2);
+
if (cmd->stop_src == TRIG_COUNT) {
/* any count is allowed */
- } else {
- /* TRIG_NONE */
- if (cmd->stop_arg != 0) {
- cmd->stop_arg = 0;
- err++;
- }
+ } else { /* TRIG_NONE */
+ err |= cfc_check_trigger_arg_is(&cmd->stop_arg, 0);
}
if (err)
@@ -908,6 +885,7 @@
static int dt282x_ao_inttrig(struct comedi_device *dev,
struct comedi_subdevice *s, unsigned int x)
{
+ struct dt282x_private *devpriv = dev->private;
int size;
if (x != 0)
@@ -937,6 +915,7 @@
static int dt282x_ao_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
{
+ struct dt282x_private *devpriv = dev->private;
int timer;
struct comedi_cmd *cmd = &s->async->cmd;
@@ -973,6 +952,8 @@
static int dt282x_ao_cancel(struct comedi_device *dev,
struct comedi_subdevice *s)
{
+ struct dt282x_private *devpriv = dev->private;
+
dt282x_disable_dma(dev);
devpriv->dacsr = 0;
@@ -1003,6 +984,7 @@
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
+ struct dt282x_private *devpriv = dev->private;
int mask;
mask = (CR_CHAN(insn->chanspec) < 8) ? 0x00ff : 0xff00;
@@ -1074,6 +1056,7 @@
static int dt282x_grab_dma(struct comedi_device *dev, int dma1, int dma2)
{
+ struct dt282x_private *devpriv = dev->private;
int ret;
devpriv->usedma = 0;
@@ -1135,6 +1118,7 @@
static int dt282x_attach(struct comedi_device *dev, struct comedi_devconfig *it)
{
const struct dt282x_board *board = comedi_board(dev);
+ struct dt282x_private *devpriv;
int i, irq;
int ret;
struct comedi_subdevice *s;
@@ -1217,9 +1201,10 @@
#endif
}
- ret = alloc_private(dev, sizeof(struct dt282x_private));
- if (ret < 0)
- return ret;
+ devpriv = kzalloc(sizeof(*devpriv), GFP_KERNEL);
+ if (!devpriv)
+ return -ENOMEM;
+ dev->private = devpriv;
ret = dt282x_grab_dma(dev, it->options[opt_dma1],
it->options[opt_dma2]);
@@ -1292,6 +1277,8 @@
static void dt282x_detach(struct comedi_device *dev)
{
+ struct dt282x_private *devpriv = dev->private;
+
if (dev->irq)
free_irq(dev->irq, dev);
if (dev->iobase)
diff --git a/drivers/staging/comedi/drivers/dt3000.c b/drivers/staging/comedi/drivers/dt3000.c
index 43d05ef..960da8d 100644
--- a/drivers/staging/comedi/drivers/dt3000.c
+++ b/drivers/staging/comedi/drivers/dt3000.c
@@ -29,11 +29,7 @@
Updated: Mon, 14 Apr 2008 15:41:24 +0100
Status: works
-Configuration Options:
- [0] - PCI bus of device (optional)
- [1] - PCI slot of device (optional)
- If bus/slot is not specified, the first supported
- PCI device found will be used.
+Configuration Options: not applicable, uses PCI auto config
There is code to support AI commands, but it may not work.
@@ -65,26 +61,36 @@
#include "comedi_fc.h"
-#define PCI_VENDOR_ID_DT 0x1116
+/*
+ * PCI device id's supported by this driver
+ */
+#define PCI_DEVICE_ID_DT3001 0x0022
+#define PCI_DEVICE_ID_DT3002 0x0023
+#define PCI_DEVICE_ID_DT3003 0x0024
+#define PCI_DEVICE_ID_DT3004 0x0025
+#define PCI_DEVICE_ID_DT3005 0x0026
+#define PCI_DEVICE_ID_DT3001_PGL 0x0027
+#define PCI_DEVICE_ID_DT3003_PGL 0x0028
-static const struct comedi_lrange range_dt3000_ai = { 4, {
- RANGE(-10, 10),
- RANGE(-5, 5),
- RANGE(-2.5, 2.5),
- RANGE(-1.25, 1.25)
- }
+static const struct comedi_lrange range_dt3000_ai = {
+ 4, {
+ BIP_RANGE(10),
+ BIP_RANGE(5),
+ BIP_RANGE(2.5),
+ BIP_RANGE(1.25)
+ }
};
-static const struct comedi_lrange range_dt3000_ai_pgl = { 4, {
- RANGE(-10, 10),
- RANGE(-1, 1),
- RANGE(-0.1, 0.1),
- RANGE(-0.02, 0.02)
- }
+static const struct comedi_lrange range_dt3000_ai_pgl = {
+ 4, {
+ BIP_RANGE(10),
+ BIP_RANGE(1),
+ BIP_RANGE(0.1),
+ BIP_RANGE(0.02)
+ }
};
struct dt3k_boardtype {
-
const char *name;
unsigned int device_id;
int adchan;
@@ -96,73 +102,70 @@
};
static const struct dt3k_boardtype dt3k_boardtypes[] = {
- {.name = "dt3001",
- .device_id = 0x22,
- .adchan = 16,
- .adbits = 12,
- .adrange = &range_dt3000_ai,
- .ai_speed = 3000,
- .dachan = 2,
- .dabits = 12,
- },
- {.name = "dt3001-pgl",
- .device_id = 0x27,
- .adchan = 16,
- .adbits = 12,
- .adrange = &range_dt3000_ai_pgl,
- .ai_speed = 3000,
- .dachan = 2,
- .dabits = 12,
- },
- {.name = "dt3002",
- .device_id = 0x23,
- .adchan = 32,
- .adbits = 12,
- .adrange = &range_dt3000_ai,
- .ai_speed = 3000,
- .dachan = 0,
- .dabits = 0,
- },
- {.name = "dt3003",
- .device_id = 0x24,
- .adchan = 64,
- .adbits = 12,
- .adrange = &range_dt3000_ai,
- .ai_speed = 3000,
- .dachan = 2,
- .dabits = 12,
- },
- {.name = "dt3003-pgl",
- .device_id = 0x28,
- .adchan = 64,
- .adbits = 12,
- .adrange = &range_dt3000_ai_pgl,
- .ai_speed = 3000,
- .dachan = 2,
- .dabits = 12,
- },
- {.name = "dt3004",
- .device_id = 0x25,
- .adchan = 16,
- .adbits = 16,
- .adrange = &range_dt3000_ai,
- .ai_speed = 10000,
- .dachan = 2,
- .dabits = 12,
- },
- {.name = "dt3005", /* a.k.a. 3004-200 */
- .device_id = 0x26,
- .adchan = 16,
- .adbits = 16,
- .adrange = &range_dt3000_ai,
- .ai_speed = 5000,
- .dachan = 2,
- .dabits = 12,
- },
+ {
+ .name = "dt3001",
+ .device_id = PCI_DEVICE_ID_DT3001,
+ .adchan = 16,
+ .adbits = 12,
+ .adrange = &range_dt3000_ai,
+ .ai_speed = 3000,
+ .dachan = 2,
+ .dabits = 12,
+ }, {
+ .name = "dt3001-pgl",
+ .device_id = PCI_DEVICE_ID_DT3001_PGL,
+ .adchan = 16,
+ .adbits = 12,
+ .adrange = &range_dt3000_ai_pgl,
+ .ai_speed = 3000,
+ .dachan = 2,
+ .dabits = 12,
+ }, {
+ .name = "dt3002",
+ .device_id = PCI_DEVICE_ID_DT3002,
+ .adchan = 32,
+ .adbits = 12,
+ .adrange = &range_dt3000_ai,
+ .ai_speed = 3000,
+ }, {
+ .name = "dt3003",
+ .device_id = PCI_DEVICE_ID_DT3003,
+ .adchan = 64,
+ .adbits = 12,
+ .adrange = &range_dt3000_ai,
+ .ai_speed = 3000,
+ .dachan = 2,
+ .dabits = 12,
+ }, {
+ .name = "dt3003-pgl",
+ .device_id = PCI_DEVICE_ID_DT3003_PGL,
+ .adchan = 64,
+ .adbits = 12,
+ .adrange = &range_dt3000_ai_pgl,
+ .ai_speed = 3000,
+ .dachan = 2,
+ .dabits = 12,
+ }, {
+ .name = "dt3004",
+ .device_id = PCI_DEVICE_ID_DT3004,
+ .adchan = 16,
+ .adbits = 16,
+ .adrange = &range_dt3000_ai,
+ .ai_speed = 10000,
+ .dachan = 2,
+ .dabits = 12,
+ }, {
+ .name = "dt3005", /* a.k.a. 3004-200 */
+ .device_id = PCI_DEVICE_ID_DT3005,
+ .adchan = 16,
+ .adbits = 16,
+ .adrange = &range_dt3000_ai,
+ .ai_speed = 5000,
+ .dachan = 2,
+ .dabits = 12,
+ },
};
-#define this_board ((const struct dt3k_boardtype *)dev->board_ptr)
-
#define DT3000_SIZE (4*0x1000)
/* dual-ported RAM location definitions */
@@ -257,22 +260,29 @@
unsigned int ai_rear;
};
-#define devpriv ((struct dt3k_private *)dev->private)
-
-static void dt3k_ai_empty_fifo(struct comedi_device *dev,
- struct comedi_subdevice *s);
-static int dt3k_ns_to_timer(unsigned int timer_base, unsigned int *arg,
- unsigned int round_mode);
-static int dt3k_ai_cancel(struct comedi_device *dev,
- struct comedi_subdevice *s);
#ifdef DEBUG
-static void debug_intr_flags(unsigned int flags);
+static char *intr_flags[] = {
+ "AdFull", "AdSwError", "AdHwError", "DaEmpty",
+ "DaSwError", "DaHwError", "CtDone", "CmDone",
+};
+
+static void debug_intr_flags(unsigned int flags)
+{
+ int i;
+ printk(KERN_DEBUG "dt3k: intr_flags:");
+ for (i = 0; i < 8; i++) {
+ if (flags & (1 << i))
+ printk(KERN_CONT " %s", intr_flags[i]);
+ }
+ printk(KERN_CONT "\n");
+}
#endif
#define TIMEOUT 100
-static int dt3k_send_cmd(struct comedi_device *dev, unsigned int cmd)
+static void dt3k_send_cmd(struct comedi_device *dev, unsigned int cmd)
{
+ struct dt3k_private *devpriv = dev->private;
int i;
unsigned int status = 0;
@@ -284,19 +294,18 @@
break;
udelay(1);
}
- if ((status & DT3000_COMPLETION_MASK) == DT3000_NOERROR)
- return 0;
- dev_dbg(dev->class_dev, "dt3k_send_cmd() timeout/error status=0x%04x\n",
- status);
-
- return -ETIME;
+ if ((status & DT3000_COMPLETION_MASK) != DT3000_NOERROR)
+ dev_dbg(dev->class_dev, "%s: timeout/error status=0x%04x\n",
+ __func__, status);
}
static unsigned int dt3k_readsingle(struct comedi_device *dev,
unsigned int subsys, unsigned int chan,
unsigned int gain)
{
+ struct dt3k_private *devpriv = dev->private;
+
writew(subsys, devpriv->io_addr + DPR_SubSys);
writew(chan, devpriv->io_addr + DPR_Params(0));
@@ -310,6 +319,8 @@
static void dt3k_writesingle(struct comedi_device *dev, unsigned int subsys,
unsigned int chan, unsigned int data)
{
+ struct dt3k_private *devpriv = dev->private;
+
writew(subsys, devpriv->io_addr + DPR_SubSys);
writew(chan, devpriv->io_addr + DPR_Params(0));
@@ -319,6 +330,47 @@
dt3k_send_cmd(dev, CMD_WRITESINGLE);
}
+static void dt3k_ai_empty_fifo(struct comedi_device *dev,
+ struct comedi_subdevice *s)
+{
+ struct dt3k_private *devpriv = dev->private;
+ int front;
+ int rear;
+ int count;
+ int i;
+ short data;
+
+ front = readw(devpriv->io_addr + DPR_AD_Buf_Front);
+ count = front - devpriv->ai_front;
+ if (count < 0)
+ count += AI_FIFO_DEPTH;
+
+ rear = devpriv->ai_rear;
+
+ for (i = 0; i < count; i++) {
+ data = readw(devpriv->io_addr + DPR_ADC_buffer + rear);
+ comedi_buf_put(s->async, data);
+ rear++;
+ if (rear >= AI_FIFO_DEPTH)
+ rear = 0;
+ }
+
+ devpriv->ai_rear = rear;
+ writew(rear, devpriv->io_addr + DPR_AD_Buf_Rear);
+}
+
+static int dt3k_ai_cancel(struct comedi_device *dev, struct comedi_subdevice *s)
+{
+ struct dt3k_private *devpriv = dev->private;
+
+ writew(SUBS_AI, devpriv->io_addr + DPR_SubSys);
+ dt3k_send_cmd(dev, CMD_STOP);
+
+ writew(0, devpriv->io_addr + DPR_Int_Mask);
+
+ return 0;
+}
+
static int debug_n_ints;
/* FIXME! Assumes shared interrupt is for this card. */
@@ -326,6 +378,7 @@
static irqreturn_t dt3k_interrupt(int irq, void *d)
{
struct comedi_device *dev = d;
+ struct dt3k_private *devpriv = dev->private;
struct comedi_subdevice *s;
unsigned int status;
@@ -356,163 +409,6 @@
return IRQ_HANDLED;
}
-#ifdef DEBUG
-static char *intr_flags[] = {
- "AdFull", "AdSwError", "AdHwError", "DaEmpty",
- "DaSwError", "DaHwError", "CtDone", "CmDone",
-};
-
-static void debug_intr_flags(unsigned int flags)
-{
- int i;
- printk(KERN_DEBUG "dt3k: intr_flags:");
- for (i = 0; i < 8; i++) {
- if (flags & (1 << i))
- printk(KERN_CONT " %s", intr_flags[i]);
- }
- printk(KERN_CONT "\n");
-}
-#endif
-
-static void dt3k_ai_empty_fifo(struct comedi_device *dev,
- struct comedi_subdevice *s)
-{
- int front;
- int rear;
- int count;
- int i;
- short data;
-
- front = readw(devpriv->io_addr + DPR_AD_Buf_Front);
- count = front - devpriv->ai_front;
- if (count < 0)
- count += AI_FIFO_DEPTH;
-
- dev_dbg(dev->class_dev, "reading %d samples\n", count);
-
- rear = devpriv->ai_rear;
-
- for (i = 0; i < count; i++) {
- data = readw(devpriv->io_addr + DPR_ADC_buffer + rear);
- comedi_buf_put(s->async, data);
- rear++;
- if (rear >= AI_FIFO_DEPTH)
- rear = 0;
- }
-
- devpriv->ai_rear = rear;
- writew(rear, devpriv->io_addr + DPR_AD_Buf_Rear);
-}
-
-static int dt3k_ai_cmdtest(struct comedi_device *dev,
- struct comedi_subdevice *s, struct comedi_cmd *cmd)
-{
- int err = 0;
- int tmp;
-
- /* Step 1 : check if triggers are trivially valid */
-
- err |= cfc_check_trigger_src(&cmd->start_src, TRIG_NOW);
- err |= cfc_check_trigger_src(&cmd->scan_begin_src, TRIG_TIMER);
- err |= cfc_check_trigger_src(&cmd->convert_src, TRIG_TIMER);
- err |= cfc_check_trigger_src(&cmd->scan_end_src, TRIG_COUNT);
- err |= cfc_check_trigger_src(&cmd->stop_src, TRIG_COUNT);
-
- if (err)
- return 1;
-
- /* Step 2a : make sure trigger sources are unique */
- /* Step 2b : and mutually compatible */
-
- if (err)
- return 2;
-
- /* step 3: make sure arguments are trivially compatible */
-
- if (cmd->start_arg != 0) {
- cmd->start_arg = 0;
- err++;
- }
-
- if (cmd->scan_begin_src == TRIG_TIMER) {
- if (cmd->scan_begin_arg < this_board->ai_speed) {
- cmd->scan_begin_arg = this_board->ai_speed;
- err++;
- }
- if (cmd->scan_begin_arg > 100 * 16 * 65535) {
- cmd->scan_begin_arg = 100 * 16 * 65535;
- err++;
- }
- } else {
- /* not supported */
- }
- if (cmd->convert_src == TRIG_TIMER) {
- if (cmd->convert_arg < this_board->ai_speed) {
- cmd->convert_arg = this_board->ai_speed;
- err++;
- }
- if (cmd->convert_arg > 50 * 16 * 65535) {
- cmd->convert_arg = 50 * 16 * 65535;
- err++;
- }
- } else {
- /* not supported */
- }
-
- if (cmd->scan_end_arg != cmd->chanlist_len) {
- cmd->scan_end_arg = cmd->chanlist_len;
- err++;
- }
- if (cmd->stop_src == TRIG_COUNT) {
- if (cmd->stop_arg > 0x00ffffff) {
- cmd->stop_arg = 0x00ffffff;
- err++;
- }
- } else {
- /* TRIG_NONE */
- if (cmd->stop_arg != 0) {
- cmd->stop_arg = 0;
- err++;
- }
- }
-
- if (err)
- return 3;
-
- /* step 4: fix up any arguments */
-
- if (cmd->scan_begin_src == TRIG_TIMER) {
- tmp = cmd->scan_begin_arg;
- dt3k_ns_to_timer(100, &cmd->scan_begin_arg,
- cmd->flags & TRIG_ROUND_MASK);
- if (tmp != cmd->scan_begin_arg)
- err++;
- } else {
- /* not supported */
- }
- if (cmd->convert_src == TRIG_TIMER) {
- tmp = cmd->convert_arg;
- dt3k_ns_to_timer(50, &cmd->convert_arg,
- cmd->flags & TRIG_ROUND_MASK);
- if (tmp != cmd->convert_arg)
- err++;
- if (cmd->scan_begin_src == TRIG_TIMER &&
- cmd->scan_begin_arg <
- cmd->convert_arg * cmd->scan_end_arg) {
- cmd->scan_begin_arg =
- cmd->convert_arg * cmd->scan_end_arg;
- err++;
- }
- } else {
- /* not supported */
- }
-
- if (err)
- return 4;
-
- return 0;
-}
-
static int dt3k_ns_to_timer(unsigned int timer_base, unsigned int *nanosec,
unsigned int round_mode)
{
@@ -548,17 +444,99 @@
return (prescale << 16) | (divider);
}
+static int dt3k_ai_cmdtest(struct comedi_device *dev,
+ struct comedi_subdevice *s, struct comedi_cmd *cmd)
+{
+ const struct dt3k_boardtype *this_board = comedi_board(dev);
+ int err = 0;
+ int tmp;
+
+ /* Step 1 : check if triggers are trivially valid */
+
+ err |= cfc_check_trigger_src(&cmd->start_src, TRIG_NOW);
+ err |= cfc_check_trigger_src(&cmd->scan_begin_src, TRIG_TIMER);
+ err |= cfc_check_trigger_src(&cmd->convert_src, TRIG_TIMER);
+ err |= cfc_check_trigger_src(&cmd->scan_end_src, TRIG_COUNT);
+ err |= cfc_check_trigger_src(&cmd->stop_src, TRIG_COUNT);
+
+ if (err)
+ return 1;
+
+ /* Step 2a : make sure trigger sources are unique */
+ /* Step 2b : and mutually compatible */
+
+ if (err)
+ return 2;
+
+ /* Step 3: check if arguments are trivially valid */
+
+ err |= cfc_check_trigger_arg_is(&cmd->start_arg, 0);
+
+ if (cmd->scan_begin_src == TRIG_TIMER) {
+ err |= cfc_check_trigger_arg_min(&cmd->scan_begin_arg,
+ this_board->ai_speed);
+ err |= cfc_check_trigger_arg_max(&cmd->scan_begin_arg,
+ 100 * 16 * 65535);
+ }
+
+ if (cmd->convert_src == TRIG_TIMER) {
+ err |= cfc_check_trigger_arg_min(&cmd->convert_arg,
+ this_board->ai_speed);
+ err |= cfc_check_trigger_arg_max(&cmd->convert_arg,
+ 50 * 16 * 65535);
+ }
+
+ err |= cfc_check_trigger_arg_is(&cmd->scan_end_arg, cmd->chanlist_len);
+
+ if (cmd->stop_src == TRIG_COUNT)
+ err |= cfc_check_trigger_arg_max(&cmd->stop_arg, 0x00ffffff);
+ else /* TRIG_NONE */
+ err |= cfc_check_trigger_arg_is(&cmd->stop_arg, 0);
+
+ if (err)
+ return 3;
+
+ /* step 4: fix up any arguments */
+
+ if (cmd->scan_begin_src == TRIG_TIMER) {
+ tmp = cmd->scan_begin_arg;
+ dt3k_ns_to_timer(100, &cmd->scan_begin_arg,
+ cmd->flags & TRIG_ROUND_MASK);
+ if (tmp != cmd->scan_begin_arg)
+ err++;
+ }
+
+ if (cmd->convert_src == TRIG_TIMER) {
+ tmp = cmd->convert_arg;
+ dt3k_ns_to_timer(50, &cmd->convert_arg,
+ cmd->flags & TRIG_ROUND_MASK);
+ if (tmp != cmd->convert_arg)
+ err++;
+ if (cmd->scan_begin_src == TRIG_TIMER &&
+ cmd->scan_begin_arg <
+ cmd->convert_arg * cmd->scan_end_arg) {
+ cmd->scan_begin_arg =
+ cmd->convert_arg * cmd->scan_end_arg;
+ err++;
+ }
+ }
+
+ if (err)
+ return 4;
+
+ return 0;
+}
+
static int dt3k_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
{
+ struct dt3k_private *devpriv = dev->private;
struct comedi_cmd *cmd = &s->async->cmd;
int i;
unsigned int chan, range, aref;
unsigned int divider;
unsigned int tscandiv;
- int ret;
unsigned int mode;
- dev_dbg(dev->class_dev, "dt3k_ai_cmd:\n");
for (i = 0; i < cmd->chanlist_len; i++) {
chan = CR_CHAN(cmd->chanlist[i]);
range = CR_RANGE(cmd->chanlist[i]);
@@ -569,41 +547,29 @@
aref = CR_AREF(cmd->chanlist[0]);
writew(cmd->scan_end_arg, devpriv->io_addr + DPR_Params(0));
- dev_dbg(dev->class_dev, "param[0]=0x%04x\n", cmd->scan_end_arg);
if (cmd->convert_src == TRIG_TIMER) {
divider = dt3k_ns_to_timer(50, &cmd->convert_arg,
cmd->flags & TRIG_ROUND_MASK);
writew((divider >> 16), devpriv->io_addr + DPR_Params(1));
- dev_dbg(dev->class_dev, "param[1]=0x%04x\n", divider >> 16);
writew((divider & 0xffff), devpriv->io_addr + DPR_Params(2));
- dev_dbg(dev->class_dev, "param[2]=0x%04x\n", divider & 0xffff);
- } else {
- /* not supported */
}
if (cmd->scan_begin_src == TRIG_TIMER) {
tscandiv = dt3k_ns_to_timer(100, &cmd->scan_begin_arg,
cmd->flags & TRIG_ROUND_MASK);
writew((tscandiv >> 16), devpriv->io_addr + DPR_Params(3));
- dev_dbg(dev->class_dev, "param[3]=0x%04x\n", tscandiv >> 16);
writew((tscandiv & 0xffff), devpriv->io_addr + DPR_Params(4));
- dev_dbg(dev->class_dev, "param[4]=0x%04x\n", tscandiv & 0xffff);
- } else {
- /* not supported */
}
mode = DT3000_AD_RETRIG_INTERNAL | 0 | 0;
writew(mode, devpriv->io_addr + DPR_Params(5));
- dev_dbg(dev->class_dev, "param[5]=0x%04x\n", mode);
writew(aref == AREF_DIFF, devpriv->io_addr + DPR_Params(6));
- dev_dbg(dev->class_dev, "param[6]=0x%04x\n", aref == AREF_DIFF);
writew(AI_FIFO_DEPTH / 2, devpriv->io_addr + DPR_Params(7));
- dev_dbg(dev->class_dev, "param[7]=0x%04x\n", AI_FIFO_DEPTH / 2);
writew(SUBS_AI, devpriv->io_addr + DPR_SubSys);
- ret = dt3k_send_cmd(dev, CMD_CONFIG);
+ dt3k_send_cmd(dev, CMD_CONFIG);
writew(DT3000_ADFULL | DT3000_ADSWERR | DT3000_ADHWERR,
devpriv->io_addr + DPR_Int_Mask);
@@ -611,19 +577,7 @@
debug_n_ints = 0;
writew(SUBS_AI, devpriv->io_addr + DPR_SubSys);
- ret = dt3k_send_cmd(dev, CMD_START);
-
- return 0;
-}
-
-static int dt3k_ai_cancel(struct comedi_device *dev, struct comedi_subdevice *s)
-{
- int ret;
-
- writew(SUBS_AI, devpriv->io_addr + DPR_SubSys);
- ret = dt3k_send_cmd(dev, CMD_STOP);
-
- writew(0, devpriv->io_addr + DPR_Int_Mask);
+ dt3k_send_cmd(dev, CMD_START);
return 0;
}
@@ -648,6 +602,7 @@
static int dt3k_ao_insn(struct comedi_device *dev, struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
+ struct dt3k_private *devpriv = dev->private;
int i;
unsigned int chan;
@@ -664,6 +619,7 @@
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
+ struct dt3k_private *devpriv = dev->private;
int i;
unsigned int chan;
@@ -676,6 +632,8 @@
static void dt3k_dio_config(struct comedi_device *dev, int bits)
{
+ struct dt3k_private *devpriv = dev->private;
+
/* XXX */
writew(SUBS_DOUT, devpriv->io_addr + DPR_SubSys);
@@ -739,6 +697,7 @@
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
+ struct dt3k_private *devpriv = dev->private;
unsigned int addr = CR_CHAN(insn->chanspec);
int i;
@@ -755,54 +714,42 @@
return i;
}
-static struct pci_dev *dt3000_find_pci_dev(struct comedi_device *dev,
- struct comedi_devconfig *it)
+static const void *dt3000_find_boardinfo(struct comedi_device *dev,
+ struct pci_dev *pcidev)
{
- struct pci_dev *pcidev = NULL;
- int bus = it->options[0];
- int slot = it->options[1];
+ const struct dt3k_boardtype *this_board;
int i;
- for_each_pci_dev(pcidev) {
- if (bus || slot) {
- if (bus != pcidev->bus->number ||
- slot != PCI_SLOT(pcidev->devfn))
- continue;
- }
- if (pcidev->vendor != PCI_VENDOR_ID_DT)
- continue;
- for (i = 0; i < ARRAY_SIZE(dt3k_boardtypes); i++) {
- if (dt3k_boardtypes[i].device_id != pcidev->device)
- continue;
- dev->board_ptr = dt3k_boardtypes + i;
- return pcidev;
- }
+ for (i = 0; i < ARRAY_SIZE(dt3k_boardtypes); i++) {
+ this_board = &dt3k_boardtypes[i];
+ if (this_board->device_id == pcidev->device)
+ return this_board;
}
- dev_err(dev->class_dev,
- "No supported board found! (req. bus %d, slot %d)\n",
- bus, slot);
return NULL;
}
-static int dt3000_attach(struct comedi_device *dev, struct comedi_devconfig *it)
+static int dt3000_auto_attach(struct comedi_device *dev,
+ unsigned long context_unused)
{
- struct pci_dev *pcidev;
+ struct pci_dev *pcidev = comedi_to_pci_dev(dev);
+ const struct dt3k_boardtype *this_board;
+ struct dt3k_private *devpriv;
struct comedi_subdevice *s;
resource_size_t pci_base;
int ret = 0;
- dev_dbg(dev->class_dev, "dt3000:\n");
+ this_board = dt3000_find_boardinfo(dev, pcidev);
+ if (!this_board)
+ return -ENODEV;
+ dev->board_ptr = this_board;
+ dev->board_name = this_board->name;
- ret = alloc_private(dev, sizeof(struct dt3k_private));
- if (ret < 0)
- return ret;
+ devpriv = kzalloc(sizeof(*devpriv), GFP_KERNEL);
+ if (!devpriv)
+ return -ENOMEM;
+ dev->private = devpriv;
- pcidev = dt3000_find_pci_dev(dev, it);
- if (!pcidev)
- return -EIO;
- comedi_set_hw_dev(dev, &pcidev->dev);
-
- ret = comedi_pci_enable(pcidev, "dt3000");
+ ret = comedi_pci_enable(pcidev, dev->board_name);
if (ret < 0)
return ret;
dev->iobase = 1; /* the "detach" needs this */
@@ -812,14 +759,10 @@
if (!devpriv->io_addr)
return -ENOMEM;
- dev->board_name = this_board->name;
-
- if (request_irq(pcidev->irq, dt3k_interrupt, IRQF_SHARED,
- "dt3000", dev)) {
- dev_err(dev->class_dev, "unable to allocate IRQ %u\n",
- pcidev->irq);
- return -EINVAL;
- }
+ ret = request_irq(pcidev->irq, dt3k_interrupt, IRQF_SHARED,
+ dev->board_name, dev);
+ if (ret)
+ return ret;
dev->irq = pcidev->irq;
ret = comedi_alloc_subdevices(dev, 4);
@@ -828,50 +771,49 @@
s = &dev->subdevices[0];
dev->read_subdev = s;
-
/* ai subdevice */
- s->type = COMEDI_SUBD_AI;
- s->subdev_flags = SDF_READABLE | SDF_GROUND | SDF_DIFF | SDF_CMD_READ;
- s->n_chan = this_board->adchan;
- s->insn_read = dt3k_ai_insn;
- s->maxdata = (1 << this_board->adbits) - 1;
- s->len_chanlist = 512;
- s->range_table = &range_dt3000_ai; /* XXX */
- s->do_cmd = dt3k_ai_cmd;
- s->do_cmdtest = dt3k_ai_cmdtest;
- s->cancel = dt3k_ai_cancel;
+ s->type = COMEDI_SUBD_AI;
+ s->subdev_flags = SDF_READABLE | SDF_GROUND | SDF_DIFF | SDF_CMD_READ;
+ s->n_chan = this_board->adchan;
+ s->insn_read = dt3k_ai_insn;
+ s->maxdata = (1 << this_board->adbits) - 1;
+ s->len_chanlist = 512;
+ s->range_table = &range_dt3000_ai; /* XXX */
+ s->do_cmd = dt3k_ai_cmd;
+ s->do_cmdtest = dt3k_ai_cmdtest;
+ s->cancel = dt3k_ai_cancel;
s = &dev->subdevices[1];
/* ao subsystem */
- s->type = COMEDI_SUBD_AO;
- s->subdev_flags = SDF_WRITABLE;
- s->n_chan = 2;
- s->insn_read = dt3k_ao_insn_read;
- s->insn_write = dt3k_ao_insn;
- s->maxdata = (1 << this_board->dabits) - 1;
- s->len_chanlist = 1;
- s->range_table = &range_bipolar10;
+ s->type = COMEDI_SUBD_AO;
+ s->subdev_flags = SDF_WRITABLE;
+ s->n_chan = 2;
+ s->insn_read = dt3k_ao_insn_read;
+ s->insn_write = dt3k_ao_insn;
+ s->maxdata = (1 << this_board->dabits) - 1;
+ s->len_chanlist = 1;
+ s->range_table = &range_bipolar10;
s = &dev->subdevices[2];
/* dio subsystem */
- s->type = COMEDI_SUBD_DIO;
- s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
- s->n_chan = 8;
- s->insn_config = dt3k_dio_insn_config;
- s->insn_bits = dt3k_dio_insn_bits;
- s->maxdata = 1;
- s->len_chanlist = 8;
- s->range_table = &range_digital;
+ s->type = COMEDI_SUBD_DIO;
+ s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
+ s->n_chan = 8;
+ s->insn_config = dt3k_dio_insn_config;
+ s->insn_bits = dt3k_dio_insn_bits;
+ s->maxdata = 1;
+ s->len_chanlist = 8;
+ s->range_table = &range_digital;
s = &dev->subdevices[3];
/* mem subsystem */
- s->type = COMEDI_SUBD_MEMORY;
- s->subdev_flags = SDF_READABLE;
- s->n_chan = 0x1000;
- s->insn_read = dt3k_mem_insn_read;
- s->maxdata = 0xff;
- s->len_chanlist = 1;
- s->range_table = &range_unknown;
+ s->type = COMEDI_SUBD_MEMORY;
+ s->subdev_flags = SDF_READABLE;
+ s->n_chan = 0x1000;
+ s->insn_read = dt3k_mem_insn_read;
+ s->maxdata = 0xff;
+ s->len_chanlist = 1;
+ s->range_table = &range_unknown;
#if 0
s = &dev->subdevices[4];
@@ -879,12 +821,15 @@
s->type = COMEDI_SUBD_PROC;
#endif
+ dev_info(dev->class_dev, "%s attached\n", dev->board_name);
+
return 0;
}
static void dt3000_detach(struct comedi_device *dev)
{
struct pci_dev *pcidev = comedi_to_pci_dev(dev);
+ struct dt3k_private *devpriv = dev->private;
if (dev->irq)
free_irq(dev->irq, dev);
@@ -895,36 +840,35 @@
if (pcidev) {
if (dev->iobase)
comedi_pci_disable(pcidev);
- pci_dev_put(pcidev);
}
}
static struct comedi_driver dt3000_driver = {
.driver_name = "dt3000",
.module = THIS_MODULE,
- .attach = dt3000_attach,
+ .auto_attach = dt3000_auto_attach,
.detach = dt3000_detach,
};
-static int __devinit dt3000_pci_probe(struct pci_dev *dev,
+static int dt3000_pci_probe(struct pci_dev *dev,
const struct pci_device_id *ent)
{
return comedi_pci_auto_config(dev, &dt3000_driver);
}
-static void __devexit dt3000_pci_remove(struct pci_dev *dev)
+static void dt3000_pci_remove(struct pci_dev *dev)
{
comedi_pci_auto_unconfig(dev);
}
static DEFINE_PCI_DEVICE_TABLE(dt3000_pci_table) = {
- { PCI_DEVICE(PCI_VENDOR_ID_DT, 0x0022) },
- { PCI_DEVICE(PCI_VENDOR_ID_DT, 0x0027) },
- { PCI_DEVICE(PCI_VENDOR_ID_DT, 0x0023) },
- { PCI_DEVICE(PCI_VENDOR_ID_DT, 0x0024) },
- { PCI_DEVICE(PCI_VENDOR_ID_DT, 0x0028) },
- { PCI_DEVICE(PCI_VENDOR_ID_DT, 0x0025) },
- { PCI_DEVICE(PCI_VENDOR_ID_DT, 0x0026) },
+ { PCI_DEVICE(PCI_VENDOR_ID_DT, PCI_DEVICE_ID_DT3001) },
+ { PCI_DEVICE(PCI_VENDOR_ID_DT, PCI_DEVICE_ID_DT3001_PGL) },
+ { PCI_DEVICE(PCI_VENDOR_ID_DT, PCI_DEVICE_ID_DT3002) },
+ { PCI_DEVICE(PCI_VENDOR_ID_DT, PCI_DEVICE_ID_DT3003) },
+ { PCI_DEVICE(PCI_VENDOR_ID_DT, PCI_DEVICE_ID_DT3003_PGL) },
+ { PCI_DEVICE(PCI_VENDOR_ID_DT, PCI_DEVICE_ID_DT3004) },
+ { PCI_DEVICE(PCI_VENDOR_ID_DT, PCI_DEVICE_ID_DT3005) },
{ 0 }
};
MODULE_DEVICE_TABLE(pci, dt3000_pci_table);
@@ -933,7 +877,7 @@
.name = "dt3000",
.id_table = dt3000_pci_table,
.probe = dt3000_pci_probe,
- .remove = __devexit_p(dt3000_pci_remove),
+ .remove = dt3000_pci_remove,
};
module_comedi_pci_driver(dt3000_driver, dt3000_pci_driver);
diff --git a/drivers/staging/comedi/drivers/dt9812.c b/drivers/staging/comedi/drivers/dt9812.c
index bc6f409..1767998 100644
--- a/drivers/staging/comedi/drivers/dt9812.c
+++ b/drivers/staging/comedi/drivers/dt9812.c
@@ -43,6 +43,8 @@
* says P1).
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/init.h>
@@ -323,9 +325,6 @@
static struct slot_dt9812 dt9812[DT9812_NUM_SLOTS];
-/* Useful shorthand access to private data */
-#define devpriv ((struct comedi_dt9812 *)dev->private)
-
static inline struct usb_dt9812 *to_dt9812_dev(struct kref *d)
{
return container_of(d, struct usb_dt9812, kref);
@@ -893,6 +892,7 @@
static int dt9812_comedi_open(struct comedi_device *dev)
{
+ struct comedi_dt9812 *devpriv = dev->private;
int result = -ENODEV;
down(&devpriv->slot->mutex);
@@ -947,6 +947,7 @@
struct comedi_subdevice *s, struct comedi_insn *insn,
unsigned int *data)
{
+ struct comedi_dt9812 *devpriv = dev->private;
int n;
u8 bits = 0;
@@ -960,6 +961,7 @@
struct comedi_subdevice *s, struct comedi_insn *insn,
unsigned int *data)
{
+ struct comedi_dt9812 *devpriv = dev->private;
int n;
u8 bits = 0;
@@ -979,6 +981,7 @@
struct comedi_subdevice *s, struct comedi_insn *insn,
unsigned int *data)
{
+ struct comedi_dt9812 *devpriv = dev->private;
int n;
for (n = 0; n < insn->n; n++) {
@@ -995,6 +998,7 @@
struct comedi_subdevice *s, struct comedi_insn *insn,
unsigned int *data)
{
+ struct comedi_dt9812 *devpriv = dev->private;
int n;
u16 value;
@@ -1010,6 +1014,7 @@
struct comedi_subdevice *s, struct comedi_insn *insn,
unsigned int *data)
{
+ struct comedi_dt9812 *devpriv = dev->private;
int n;
for (n = 0; n < insn->n; n++)
@@ -1019,14 +1024,17 @@
static int dt9812_attach(struct comedi_device *dev, struct comedi_devconfig *it)
{
+ struct comedi_dt9812 *devpriv;
int i;
struct comedi_subdevice *s;
int ret;
dev->board_name = "dt9812";
- if (alloc_private(dev, sizeof(struct comedi_dt9812)) < 0)
+ devpriv = kzalloc(sizeof(*devpriv), GFP_KERNEL);
+ if (!devpriv)
return -ENOMEM;
+ dev->private = devpriv;
/*
* Special open routine, since USB unit may be unattached at
@@ -1077,8 +1085,7 @@
s->insn_write = &dt9812_ao_winsn;
s->insn_read = &dt9812_ao_rinsn;
- printk(KERN_INFO "comedi%d: successfully attached to dt9812.\n",
- dev->minor);
+ dev_info(dev->class_dev, "successfully attached to dt9812.\n");
down(&dt9812_mutex);
/* Find a slot for the comedi device */
@@ -1140,17 +1147,15 @@
/* register with the USB subsystem */
result = usb_register(&dt9812_usb_driver);
if (result) {
- printk(KERN_ERR KBUILD_MODNAME
- ": usb_register failed. Error number %d\n", result);
+ pr_err("usb_register failed. Error number %d\n", result);
return result;
}
/* register with comedi */
result = comedi_driver_register(&dt9812_comedi_driver);
if (result) {
usb_deregister(&dt9812_usb_driver);
- printk(KERN_ERR KBUILD_MODNAME
- ": comedi_driver_register failed. Error number %d\n",
- result);
+ pr_err("comedi_driver_register failed. Error number %d\n",
+ result);
}
return result;
diff --git a/drivers/staging/comedi/drivers/dyna_pci10xx.c b/drivers/staging/comedi/drivers/dyna_pci10xx.c
index 6f612be..8497a36 100644
--- a/drivers/staging/comedi/drivers/dyna_pci10xx.c
+++ b/drivers/staging/comedi/drivers/dyna_pci10xx.c
@@ -40,8 +40,6 @@
#include "../comedidev.h"
#include <linux/mutex.h>
-#define PCI_VENDOR_ID_DYNALOG 0x10b5
-
#define READ_TIMEOUT 50
static const struct comedi_lrange range_pci1050_ai = { 3, {
@@ -179,21 +177,20 @@
return insn->n;
}
-static int dyna_pci10xx_attach_pci(struct comedi_device *dev,
- struct pci_dev *pcidev)
+static int dyna_pci10xx_auto_attach(struct comedi_device *dev,
+ unsigned long context_unused)
{
+ struct pci_dev *pcidev = comedi_to_pci_dev(dev);
struct dyna_pci10xx_private *devpriv;
struct comedi_subdevice *s;
int ret;
- comedi_set_hw_dev(dev, &pcidev->dev);
-
dev->board_name = dev->driver->driver_name;
- ret = alloc_private(dev, sizeof(*devpriv));
- if (ret)
- return ret;
- devpriv = dev->private;
+ devpriv = kzalloc(sizeof(*devpriv), GFP_KERNEL);
+ if (!devpriv)
+ return -ENOMEM;
+ dev->private = devpriv;
ret = comedi_pci_enable(pcidev, dev->board_name);
if (ret)
@@ -269,23 +266,23 @@
static struct comedi_driver dyna_pci10xx_driver = {
.driver_name = "dyna_pci10xx",
.module = THIS_MODULE,
- .attach_pci = dyna_pci10xx_attach_pci,
+ .auto_attach = dyna_pci10xx_auto_attach,
.detach = dyna_pci10xx_detach,
};
-static int __devinit dyna_pci10xx_pci_probe(struct pci_dev *dev,
+static int dyna_pci10xx_pci_probe(struct pci_dev *dev,
const struct pci_device_id *ent)
{
return comedi_pci_auto_config(dev, &dyna_pci10xx_driver);
}
-static void __devexit dyna_pci10xx_pci_remove(struct pci_dev *dev)
+static void dyna_pci10xx_pci_remove(struct pci_dev *dev)
{
comedi_pci_auto_unconfig(dev);
}
static DEFINE_PCI_DEVICE_TABLE(dyna_pci10xx_pci_table) = {
- { PCI_DEVICE(PCI_VENDOR_ID_DYNALOG, 0x1050) },
+ { PCI_DEVICE(PCI_VENDOR_ID_PLX, 0x1050) },
{ 0 }
};
MODULE_DEVICE_TABLE(pci, dyna_pci10xx_pci_table);
@@ -294,7 +291,7 @@
.name = "dyna_pci10xx",
.id_table = dyna_pci10xx_pci_table,
.probe = dyna_pci10xx_pci_probe,
- .remove = __devexit_p(dyna_pci10xx_pci_remove),
+ .remove = dyna_pci10xx_pci_remove,
};
module_comedi_pci_driver(dyna_pci10xx_driver, dyna_pci10xx_pci_driver);
diff --git a/drivers/staging/comedi/drivers/fl512.c b/drivers/staging/comedi/drivers/fl512.c
index ae8e8f4..019c96e 100644
--- a/drivers/staging/comedi/drivers/fl512.c
+++ b/drivers/staging/comedi/drivers/fl512.c
@@ -29,8 +29,6 @@
short ao_readback[2];
};
-#define devpriv ((struct fl512_private *) dev->private)
-
static const struct comedi_lrange range_fl512 = { 4, {
BIP_RANGE(0.5),
BIP_RANGE(1),
@@ -75,6 +73,7 @@
struct comedi_subdevice *s, struct comedi_insn *insn,
unsigned int *data)
{
+ struct fl512_private *devpriv = dev->private;
int n;
int chan = CR_CHAN(insn->chanspec); /* get chan to write */
unsigned long iobase = dev->iobase; /* get base address */
@@ -99,6 +98,7 @@
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
+ struct fl512_private *devpriv = dev->private;
int n;
int chan = CR_CHAN(insn->chanspec);
@@ -110,6 +110,7 @@
static int fl512_attach(struct comedi_device *dev, struct comedi_devconfig *it)
{
+ struct fl512_private *devpriv;
unsigned long iobase;
int ret;
@@ -125,8 +126,11 @@
}
dev->iobase = iobase;
dev->board_name = "fl512";
- if (alloc_private(dev, sizeof(struct fl512_private)) < 0)
+
+ devpriv = kzalloc(sizeof(*devpriv), GFP_KERNEL);
+ if (!devpriv)
return -ENOMEM;
+ dev->private = devpriv;
#if DEBUG
printk(KERN_DEBUG "malloc ok\n");
diff --git a/drivers/staging/comedi/drivers/gsc_hpdi.c b/drivers/staging/comedi/drivers/gsc_hpdi.c
index abff660..154598f 100644
--- a/drivers/staging/comedi/drivers/gsc_hpdi.c
+++ b/drivers/staging/comedi/drivers/gsc_hpdi.c
@@ -26,24 +26,26 @@
************************************************************************/
/*
+ * Driver: gsc_hpdi
+ * Description: General Standards Corporation High
+ * Speed Parallel Digital Interface rs485 boards
+ * Author: Frank Mori Hess <fmhess@users.sourceforge.net>
+ * Status: only receive mode works, transmit not supported
+ * Updated: Thu, 01 Nov 2012 16:17:38 +0000
+ * Devices: [General Standards Corporation] PCI-HPDI32 (gsc_hpdi),
+ * PMC-HPDI32
+ *
+ * Configuration options:
+ * None.
+ *
+ * Manual configuration of supported devices is not supported; they are
+ * configured automatically.
+ *
+ * There are some additional hpdi models available from GSC for which
+ * support could be added to this driver.
+ */
-Driver: gsc_hpdi
-Description: General Standards Corporation High
- Speed Parallel Digital Interface rs485 boards
-Author: Frank Mori Hess <fmhess@users.sourceforge.net>
-Status: only receive mode works, transmit not supported
-Updated: 2003-02-20
-Devices: [General Standards Corporation] PCI-HPDI32 (gsc_hpdi),
- PMC-HPDI32
-
-Configuration options:
- [0] - PCI bus of device (optional)
- [1] - PCI slot of device (optional)
-
-There are some additional hpdi models available from GSC for which
-support could be added to this driver.
-
-*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/interrupt.h>
#include "../comedidev.h"
@@ -64,9 +66,9 @@
/* #define HPDI_DEBUG enable debugging code */
#ifdef HPDI_DEBUG
-#define DEBUG_PRINT(format, args...) printk(format , ## args)
+#define DEBUG_PRINT(format, args...) pr_debug(format , ## args)
#else
-#define DEBUG_PRINT(format, args...)
+#define DEBUG_PRINT(format, args...) no_printk(pr_fmt(format), ## args)
#endif
#define TIMER_BASE 50 /* 20MHz master clock */
@@ -104,35 +106,11 @@
INTERRUPT_POLARITY_REG = 0x54,
};
-int command_channel_valid(unsigned int channel)
-{
- if (channel == 0 || channel > 6) {
- printk(KERN_WARNING
- "gsc_hpdi: bug! invalid cable command channel\n");
- return 0;
- }
- return 1;
-}
-
/* bit definitions */
enum firmware_revision_bits {
FEATURES_REG_PRESENT_BIT = 0x8000,
};
-int firmware_revision(uint32_t fwr_bits)
-{
- return fwr_bits & 0xff;
-}
-
-int pcb_revision(uint32_t fwr_bits)
-{
- return (fwr_bits >> 8) & 0xff;
-}
-
-int hpdi_subid(uint32_t fwr_bits)
-{
- return (fwr_bits >> 16) & 0xff;
-}
enum board_control_bits {
BOARD_RESET_BIT = 0x1, /* wait 10usec before accessing fifos */
@@ -147,22 +125,6 @@
CABLE_THROTTLE_ENABLE_BIT = 0x20,
TEST_MODE_ENABLE_BIT = 0x80000000,
};
-uint32_t command_discrete_output_bits(unsigned int channel, int output,
- int output_value)
-{
- uint32_t bits = 0;
-
- if (command_channel_valid(channel) == 0)
- return 0;
- if (output) {
- bits |= 0x1 << (16 + channel);
- if (output_value)
- bits |= 0x1 << (24 + channel);
- } else
- bits |= 0x1 << (24 + channel);
-
- return bits;
-}
enum board_status_bits {
COMMAND_LINE_STATUS_MASK = 0x7f,
@@ -182,28 +144,17 @@
RX_OVERRUN_BIT = 0x800000,
};
-uint32_t almost_full_bits(unsigned int num_words)
+static uint32_t almost_full_bits(unsigned int num_words)
{
-/* XXX need to add or subtract one? */
+ /* XXX need to add or subtract one? */
return (num_words << 16) & 0xff0000;
}
-uint32_t almost_empty_bits(unsigned int num_words)
+static uint32_t almost_empty_bits(unsigned int num_words)
{
return num_words & 0xffff;
}
-unsigned int almost_full_num_words(uint32_t bits)
-{
-/* XXX need to add or subtract one? */
- return (bits >> 16) & 0xffff;
-}
-
-unsigned int almost_empty_num_words(uint32_t bits)
-{
- return bits & 0xffff;
-}
-
enum features_bits {
FIFO_SIZE_PRESENT_BIT = 0x1,
FIFO_WORDS_PRESENT_BIT = 0x2,
@@ -225,46 +176,19 @@
RX_ALMOST_FULL_INTR = 14,
RX_FULL_INTR = 15,
};
-int command_intr_source(unsigned int channel)
-{
- if (command_channel_valid(channel) == 0)
- channel = 1;
- return channel + 1;
-}
-uint32_t intr_bit(int interrupt_source)
+static uint32_t intr_bit(int interrupt_source)
{
return 0x1 << interrupt_source;
}
-uint32_t tx_clock_divisor_bits(unsigned int divisor)
-{
- return divisor & 0xff;
-}
-
-unsigned int fifo_size(uint32_t fifo_size_bits)
+static unsigned int fifo_size(uint32_t fifo_size_bits)
{
return fifo_size_bits & 0xfffff;
}
-unsigned int fifo_words(uint32_t fifo_words_bits)
-{
- return fifo_words_bits & 0xfffff;
-}
-
-uint32_t intr_edge_bit(int interrupt_source)
-{
- return 0x1 << interrupt_source;
-}
-
-uint32_t intr_active_high_bit(int interrupt_source)
-{
- return 0x1 << interrupt_source;
-}
-
struct hpdi_board {
-
- char *name;
+ const char *name; /* board name */
int device_id; /* pci device id */
int subdevice_id; /* pci subdevice id */
};
@@ -284,17 +208,7 @@
#endif
};
-static inline struct hpdi_board *board(const struct comedi_device *dev)
-{
- return (struct hpdi_board *)dev->board_ptr;
-}
-
struct hpdi_private {
-
- struct pci_dev *hw_dev; /* pointer to board's pci_dev struct */
- /* base addresses (physical) */
- resource_size_t plx9080_phys_iobase;
- resource_size_t hpdi_phys_iobase;
/* base addresses (ioremapped) */
void __iomem *plx9080_iobase;
void __iomem *hpdi_iobase;
@@ -321,27 +235,24 @@
unsigned dio_config_output:1;
};
-static inline struct hpdi_private *priv(struct comedi_device *dev)
-{
- return dev->private;
-}
-
static int dio_config_insn(struct comedi_device *dev,
struct comedi_subdevice *s, struct comedi_insn *insn,
unsigned int *data)
{
+ struct hpdi_private *devpriv = dev->private;
+
switch (data[0]) {
case INSN_CONFIG_DIO_OUTPUT:
- priv(dev)->dio_config_output = 1;
+ devpriv->dio_config_output = 1;
return insn->n;
break;
case INSN_CONFIG_DIO_INPUT:
- priv(dev)->dio_config_output = 0;
+ devpriv->dio_config_output = 0;
return insn->n;
break;
case INSN_CONFIG_DIO_QUERY:
data[1] =
- priv(dev)->dio_config_output ? COMEDI_OUTPUT : COMEDI_INPUT;
+ devpriv->dio_config_output ? COMEDI_OUTPUT : COMEDI_INPUT;
return insn->n;
break;
case INSN_CONFIG_BLOCK_SIZE:
@@ -356,21 +267,24 @@
static void disable_plx_interrupts(struct comedi_device *dev)
{
- writel(0, priv(dev)->plx9080_iobase + PLX_INTRCS_REG);
+ struct hpdi_private *devpriv = dev->private;
+
+ writel(0, devpriv->plx9080_iobase + PLX_INTRCS_REG);
}
/* initialize plx9080 chip */
static void init_plx9080(struct comedi_device *dev)
{
+ struct hpdi_private *devpriv = dev->private;
uint32_t bits;
- void __iomem *plx_iobase = priv(dev)->plx9080_iobase;
+ void __iomem *plx_iobase = devpriv->plx9080_iobase;
/* plx9080 dump */
DEBUG_PRINT(" plx interrupt status 0x%x\n",
readl(plx_iobase + PLX_INTRCS_REG));
DEBUG_PRINT(" plx id bits 0x%x\n", readl(plx_iobase + PLX_ID_REG));
DEBUG_PRINT(" plx control reg 0x%x\n",
- readl(priv(dev)->plx9080_iobase + PLX_CONTROL_REG));
+ readl(devpriv->plx9080_iobase + PLX_CONTROL_REG));
DEBUG_PRINT(" plx revision 0x%x\n",
readl(plx_iobase + PLX_REVISION_REG));
@@ -396,7 +310,7 @@
#else
bits = 0;
#endif
- writel(bits, priv(dev)->plx9080_iobase + PLX_BIGEND_REG);
+ writel(bits, devpriv->plx9080_iobase + PLX_BIGEND_REG);
disable_plx_interrupts(dev);
@@ -457,28 +371,29 @@
static int init_hpdi(struct comedi_device *dev)
{
+ struct hpdi_private *devpriv = dev->private;
uint32_t plx_intcsr_bits;
- writel(BOARD_RESET_BIT, priv(dev)->hpdi_iobase + BOARD_CONTROL_REG);
+ writel(BOARD_RESET_BIT, devpriv->hpdi_iobase + BOARD_CONTROL_REG);
udelay(10);
writel(almost_empty_bits(32) | almost_full_bits(32),
- priv(dev)->hpdi_iobase + RX_PROG_ALMOST_REG);
+ devpriv->hpdi_iobase + RX_PROG_ALMOST_REG);
writel(almost_empty_bits(32) | almost_full_bits(32),
- priv(dev)->hpdi_iobase + TX_PROG_ALMOST_REG);
+ devpriv->hpdi_iobase + TX_PROG_ALMOST_REG);
- priv(dev)->tx_fifo_size = fifo_size(readl(priv(dev)->hpdi_iobase +
+ devpriv->tx_fifo_size = fifo_size(readl(devpriv->hpdi_iobase +
TX_FIFO_SIZE_REG));
- priv(dev)->rx_fifo_size = fifo_size(readl(priv(dev)->hpdi_iobase +
+ devpriv->rx_fifo_size = fifo_size(readl(devpriv->hpdi_iobase +
RX_FIFO_SIZE_REG));
- writel(0, priv(dev)->hpdi_iobase + INTERRUPT_CONTROL_REG);
+ writel(0, devpriv->hpdi_iobase + INTERRUPT_CONTROL_REG);
/* enable interrupts */
plx_intcsr_bits =
ICS_AERR | ICS_PERR | ICS_PIE | ICS_PLIE | ICS_PAIE | ICS_LIE |
ICS_DMA0_E;
- writel(plx_intcsr_bits, priv(dev)->plx9080_iobase + PLX_INTRCS_REG);
+ writel(plx_intcsr_bits, devpriv->plx9080_iobase + PLX_INTRCS_REG);
return 0;
}
@@ -487,6 +402,7 @@
static int setup_dma_descriptors(struct comedi_device *dev,
unsigned int transfer_size)
{
+ struct hpdi_private *devpriv = dev->private;
unsigned int buffer_index, buffer_offset;
uint32_t next_bits = PLX_DESC_IN_PCI_BIT | PLX_INTR_TERM_COUNT |
PLX_XFER_LOCAL_TO_PCI;
@@ -500,25 +416,25 @@
DEBUG_PRINT(" transfer_size %i\n", transfer_size);
DEBUG_PRINT(" descriptors at 0x%lx\n",
- (unsigned long)priv(dev)->dma_desc_phys_addr);
+ (unsigned long)devpriv->dma_desc_phys_addr);
buffer_offset = 0;
buffer_index = 0;
for (i = 0; i < NUM_DMA_DESCRIPTORS &&
buffer_index < NUM_DMA_BUFFERS; i++) {
- priv(dev)->dma_desc[i].pci_start_addr =
- cpu_to_le32(priv(dev)->dio_buffer_phys_addr[buffer_index] +
+ devpriv->dma_desc[i].pci_start_addr =
+ cpu_to_le32(devpriv->dio_buffer_phys_addr[buffer_index] +
buffer_offset);
- priv(dev)->dma_desc[i].local_start_addr = cpu_to_le32(FIFO_REG);
- priv(dev)->dma_desc[i].transfer_size =
+ devpriv->dma_desc[i].local_start_addr = cpu_to_le32(FIFO_REG);
+ devpriv->dma_desc[i].transfer_size =
cpu_to_le32(transfer_size);
- priv(dev)->dma_desc[i].next =
- cpu_to_le32((priv(dev)->dma_desc_phys_addr + (i +
+ devpriv->dma_desc[i].next =
+ cpu_to_le32((devpriv->dma_desc_phys_addr + (i +
1) *
- sizeof(priv(dev)->dma_desc[0])) | next_bits);
+ sizeof(devpriv->dma_desc[0])) | next_bits);
- priv(dev)->desc_dio_buffer[i] =
- priv(dev)->dio_buffer[buffer_index] +
+ devpriv->desc_dio_buffer[i] =
+ devpriv->dio_buffer[buffer_index] +
(buffer_offset / sizeof(uint32_t));
buffer_offset += transfer_size;
@@ -529,128 +445,110 @@
DEBUG_PRINT(" desc %i\n", i);
DEBUG_PRINT(" start addr virt 0x%p, phys 0x%lx\n",
- priv(dev)->desc_dio_buffer[i],
- (unsigned long)priv(dev)->dma_desc[i].
+ devpriv->desc_dio_buffer[i],
+ (unsigned long)devpriv->dma_desc[i].
pci_start_addr);
DEBUG_PRINT(" next 0x%lx\n",
- (unsigned long)priv(dev)->dma_desc[i].next);
+ (unsigned long)devpriv->dma_desc[i].next);
}
- priv(dev)->num_dma_descriptors = i;
+ devpriv->num_dma_descriptors = i;
/* fix last descriptor to point back to first */
- priv(dev)->dma_desc[i - 1].next =
- cpu_to_le32(priv(dev)->dma_desc_phys_addr | next_bits);
+ devpriv->dma_desc[i - 1].next =
+ cpu_to_le32(devpriv->dma_desc_phys_addr | next_bits);
DEBUG_PRINT(" desc %i next fixup 0x%lx\n", i - 1,
- (unsigned long)priv(dev)->dma_desc[i - 1].next);
+ (unsigned long)devpriv->dma_desc[i - 1].next);
- priv(dev)->block_size = transfer_size;
+ devpriv->block_size = transfer_size;
return transfer_size;
}
-static int hpdi_attach(struct comedi_device *dev, struct comedi_devconfig *it)
+static const struct hpdi_board *hpdi_find_board(struct pci_dev *pcidev)
{
- struct pci_dev *pcidev;
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(hpdi_boards); i++)
+ if (pcidev->device == hpdi_boards[i].device_id &&
+ pcidev->subsystem_device == hpdi_boards[i].subdevice_id)
+ return &hpdi_boards[i];
+ return NULL;
+}
+
+static int hpdi_auto_attach(struct comedi_device *dev,
+ unsigned long context_unused)
+{
+ struct pci_dev *pcidev = comedi_to_pci_dev(dev);
+ const struct hpdi_board *thisboard;
+ struct hpdi_private *devpriv;
int i;
int retval;
- printk(KERN_WARNING "comedi%d: gsc_hpdi\n", dev->minor);
+ thisboard = hpdi_find_board(pcidev);
+ if (!thisboard) {
+ dev_err(dev->class_dev, "gsc_hpdi: pci %s not supported\n",
+ pci_name(pcidev));
+ return -EINVAL;
+ }
+ dev->board_ptr = thisboard;
+ dev->board_name = thisboard->name;
- if (alloc_private(dev, sizeof(struct hpdi_private)) < 0)
+ devpriv = kzalloc(sizeof(*devpriv), GFP_KERNEL);
+ if (!devpriv)
return -ENOMEM;
+ dev->private = devpriv;
- pcidev = NULL;
- for (i = 0; i < ARRAY_SIZE(hpdi_boards) &&
- dev->board_ptr == NULL; i++) {
- do {
- pcidev = pci_get_subsys(PCI_VENDOR_ID_PLX,
- hpdi_boards[i].device_id,
- PCI_VENDOR_ID_PLX,
- hpdi_boards[i].subdevice_id,
- pcidev);
- /* was a particular bus/slot requested? */
- if (it->options[0] || it->options[1]) {
- /* are we on the wrong bus/slot? */
- if (pcidev->bus->number != it->options[0] ||
- PCI_SLOT(pcidev->devfn) != it->options[1])
- continue;
- }
- if (pcidev) {
- priv(dev)->hw_dev = pcidev;
- dev->board_ptr = hpdi_boards + i;
- break;
- }
- } while (pcidev != NULL);
- }
- if (dev->board_ptr == NULL) {
- printk(KERN_WARNING "gsc_hpdi: no hpdi card found\n");
+ if (comedi_pci_enable(pcidev, dev->board_name)) {
+ dev_warn(dev->class_dev,
+ "failed enable PCI device and request regions\n");
return -EIO;
}
-
- printk(KERN_WARNING
- "gsc_hpdi: found %s on bus %i, slot %i\n", board(dev)->name,
- pcidev->bus->number, PCI_SLOT(pcidev->devfn));
-
- if (comedi_pci_enable(pcidev, dev->driver->driver_name)) {
- printk(KERN_WARNING
- " failed enable PCI device and request regions\n");
- return -EIO;
- }
+ dev->iobase = 1; /* the "detach" needs this */
pci_set_master(pcidev);
- /* Initialize dev->board_name */
- dev->board_name = board(dev)->name;
-
- priv(dev)->plx9080_phys_iobase =
- pci_resource_start(pcidev, PLX9080_BADDRINDEX);
- priv(dev)->hpdi_phys_iobase =
- pci_resource_start(pcidev, HPDI_BADDRINDEX);
-
- /* remap, won't work with 2.0 kernels but who cares */
- priv(dev)->plx9080_iobase = ioremap(priv(dev)->plx9080_phys_iobase,
- pci_resource_len(pcidev,
- PLX9080_BADDRINDEX));
- priv(dev)->hpdi_iobase =
- ioremap(priv(dev)->hpdi_phys_iobase,
- pci_resource_len(pcidev, HPDI_BADDRINDEX));
- if (!priv(dev)->plx9080_iobase || !priv(dev)->hpdi_iobase) {
- printk(KERN_WARNING " failed to remap io memory\n");
+ devpriv->plx9080_iobase =
+ ioremap(pci_resource_start(pcidev, PLX9080_BADDRINDEX),
+ pci_resource_len(pcidev, PLX9080_BADDRINDEX));
+ devpriv->hpdi_iobase =
+ ioremap(pci_resource_start(pcidev, HPDI_BADDRINDEX),
+ pci_resource_len(pcidev, HPDI_BADDRINDEX));
+ if (!devpriv->plx9080_iobase || !devpriv->hpdi_iobase) {
+ dev_warn(dev->class_dev, "failed to remap io memory\n");
return -ENOMEM;
}
- DEBUG_PRINT(" plx9080 remapped to 0x%p\n", priv(dev)->plx9080_iobase);
- DEBUG_PRINT(" hpdi remapped to 0x%p\n", priv(dev)->hpdi_iobase);
+ DEBUG_PRINT(" plx9080 remapped to 0x%p\n", devpriv->plx9080_iobase);
+ DEBUG_PRINT(" hpdi remapped to 0x%p\n", devpriv->hpdi_iobase);
init_plx9080(dev);
/* get irq */
if (request_irq(pcidev->irq, handle_interrupt, IRQF_SHARED,
- dev->driver->driver_name, dev)) {
- printk(KERN_WARNING
- " unable to allocate irq %u\n", pcidev->irq);
+ dev->board_name, dev)) {
+ dev_warn(dev->class_dev,
+ "unable to allocate irq %u\n", pcidev->irq);
return -EINVAL;
}
dev->irq = pcidev->irq;
- printk(KERN_WARNING " irq %u\n", dev->irq);
+ dev_dbg(dev->class_dev, " irq %u\n", dev->irq);
/* allocate pci dma buffers */
for (i = 0; i < NUM_DMA_BUFFERS; i++) {
- priv(dev)->dio_buffer[i] =
- pci_alloc_consistent(priv(dev)->hw_dev, DMA_BUFFER_SIZE,
- &priv(dev)->dio_buffer_phys_addr[i]);
+ devpriv->dio_buffer[i] =
+ pci_alloc_consistent(pcidev, DMA_BUFFER_SIZE,
+ &devpriv->dio_buffer_phys_addr[i]);
DEBUG_PRINT("dio_buffer at virt 0x%p, phys 0x%lx\n",
- priv(dev)->dio_buffer[i],
- (unsigned long)priv(dev)->dio_buffer_phys_addr[i]);
+ devpriv->dio_buffer[i],
+ (unsigned long)devpriv->dio_buffer_phys_addr[i]);
}
/* allocate dma descriptors */
- priv(dev)->dma_desc = pci_alloc_consistent(priv(dev)->hw_dev,
- sizeof(struct plx_dma_desc) *
- NUM_DMA_DESCRIPTORS,
- &priv(dev)->
- dma_desc_phys_addr);
- if (priv(dev)->dma_desc_phys_addr & 0xf) {
- printk(KERN_WARNING
- " dma descriptors not quad-word aligned (bug)\n");
+ devpriv->dma_desc = pci_alloc_consistent(pcidev,
+ sizeof(struct plx_dma_desc) *
+ NUM_DMA_DESCRIPTORS,
+ &devpriv->dma_desc_phys_addr);
+ if (devpriv->dma_desc_phys_addr & 0xf) {
+ dev_warn(dev->class_dev,
+ " dma descriptors not quad-word aligned (bug)\n");
return -EIO;
}
@@ -667,39 +565,37 @@
static void hpdi_detach(struct comedi_device *dev)
{
+ struct pci_dev *pcidev = comedi_to_pci_dev(dev);
+ struct hpdi_private *devpriv = dev->private;
unsigned int i;
if (dev->irq)
free_irq(dev->irq, dev);
- if ((priv(dev)) && (priv(dev)->hw_dev)) {
- if (priv(dev)->plx9080_iobase) {
+ if (devpriv) {
+ if (devpriv->plx9080_iobase) {
disable_plx_interrupts(dev);
- iounmap(priv(dev)->plx9080_iobase);
+ iounmap(devpriv->plx9080_iobase);
}
- if (priv(dev)->hpdi_iobase)
- iounmap(priv(dev)->hpdi_iobase);
+ if (devpriv->hpdi_iobase)
+ iounmap(devpriv->hpdi_iobase);
/* free pci dma buffers */
for (i = 0; i < NUM_DMA_BUFFERS; i++) {
- if (priv(dev)->dio_buffer[i])
- pci_free_consistent(priv(dev)->hw_dev,
+ if (devpriv->dio_buffer[i])
+ pci_free_consistent(pcidev,
DMA_BUFFER_SIZE,
- priv(dev)->
- dio_buffer[i],
- priv
- (dev)->dio_buffer_phys_addr
- [i]);
+ devpriv->dio_buffer[i],
+ devpriv->
+ dio_buffer_phys_addr[i]);
}
/* free dma descriptors */
- if (priv(dev)->dma_desc)
- pci_free_consistent(priv(dev)->hw_dev,
- sizeof(struct plx_dma_desc)
- * NUM_DMA_DESCRIPTORS,
- priv(dev)->dma_desc,
- priv(dev)->
- dma_desc_phys_addr);
- if (priv(dev)->hpdi_phys_iobase)
- comedi_pci_disable(priv(dev)->hw_dev);
- pci_dev_put(priv(dev)->hw_dev);
+ if (devpriv->dma_desc)
+ pci_free_consistent(pcidev,
+ sizeof(struct plx_dma_desc) *
+ NUM_DMA_DESCRIPTORS,
+ devpriv->dma_desc,
+ devpriv->dma_desc_phys_addr);
+ if (dev->iobase)
+ comedi_pci_disable(pcidev);
}
}
@@ -745,29 +641,20 @@
if (err)
return 2;
- /* step 3: make sure arguments are trivially compatible */
+ /* Step 3: check if arguments are trivially valid */
if (!cmd->chanlist_len) {
cmd->chanlist_len = 32;
- err++;
+ err |= -EINVAL;
}
- if (cmd->scan_end_arg != cmd->chanlist_len) {
- cmd->scan_end_arg = cmd->chanlist_len;
- err++;
- }
+ err |= cfc_check_trigger_arg_is(&cmd->scan_end_arg, cmd->chanlist_len);
switch (cmd->stop_src) {
case TRIG_COUNT:
- if (!cmd->stop_arg) {
- cmd->stop_arg = 1;
- err++;
- }
+ err |= cfc_check_trigger_arg_min(&cmd->stop_arg, 1);
break;
case TRIG_NONE:
- if (cmd->stop_arg != 0) {
- cmd->stop_arg = 0;
- err++;
- }
+ err |= cfc_check_trigger_arg_is(&cmd->stop_arg, 0);
break;
default:
break;
@@ -803,7 +690,9 @@
static int hpdi_cmd_test(struct comedi_device *dev, struct comedi_subdevice *s,
struct comedi_cmd *cmd)
{
- if (priv(dev)->dio_config_output)
+ struct hpdi_private *devpriv = dev->private;
+
+ if (devpriv->dio_config_output)
return -EINVAL;
else
return di_cmd_test(dev, s, cmd);
@@ -812,12 +701,15 @@
static inline void hpdi_writel(struct comedi_device *dev, uint32_t bits,
unsigned int offset)
{
- writel(bits | priv(dev)->bits[offset / sizeof(uint32_t)],
- priv(dev)->hpdi_iobase + offset);
+ struct hpdi_private *devpriv = dev->private;
+
+ writel(bits | devpriv->bits[offset / sizeof(uint32_t)],
+ devpriv->hpdi_iobase + offset);
}
static int di_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
{
+ struct hpdi_private *devpriv = dev->private;
uint32_t bits;
unsigned long flags;
struct comedi_async *async = s->async;
@@ -829,39 +721,39 @@
abort_dma(dev, 0);
- priv(dev)->dma_desc_index = 0;
+ devpriv->dma_desc_index = 0;
/* These register are supposedly unused during chained dma,
* but I have found that left over values from last operation
* occasionally cause problems with transfer of first dma
* block. Initializing them to zero seems to fix the problem. */
- writel(0, priv(dev)->plx9080_iobase + PLX_DMA0_TRANSFER_SIZE_REG);
- writel(0, priv(dev)->plx9080_iobase + PLX_DMA0_PCI_ADDRESS_REG);
- writel(0, priv(dev)->plx9080_iobase + PLX_DMA0_LOCAL_ADDRESS_REG);
+ writel(0, devpriv->plx9080_iobase + PLX_DMA0_TRANSFER_SIZE_REG);
+ writel(0, devpriv->plx9080_iobase + PLX_DMA0_PCI_ADDRESS_REG);
+ writel(0, devpriv->plx9080_iobase + PLX_DMA0_LOCAL_ADDRESS_REG);
/* give location of first dma descriptor */
bits =
- priv(dev)->dma_desc_phys_addr | PLX_DESC_IN_PCI_BIT |
+ devpriv->dma_desc_phys_addr | PLX_DESC_IN_PCI_BIT |
PLX_INTR_TERM_COUNT | PLX_XFER_LOCAL_TO_PCI;
- writel(bits, priv(dev)->plx9080_iobase + PLX_DMA0_DESCRIPTOR_REG);
+ writel(bits, devpriv->plx9080_iobase + PLX_DMA0_DESCRIPTOR_REG);
/* spinlock for plx dma control/status reg */
spin_lock_irqsave(&dev->spinlock, flags);
/* enable dma transfer */
writeb(PLX_DMA_EN_BIT | PLX_DMA_START_BIT | PLX_CLEAR_DMA_INTR_BIT,
- priv(dev)->plx9080_iobase + PLX_DMA0_CS_REG);
+ devpriv->plx9080_iobase + PLX_DMA0_CS_REG);
spin_unlock_irqrestore(&dev->spinlock, flags);
if (cmd->stop_src == TRIG_COUNT)
- priv(dev)->dio_count = cmd->stop_arg;
+ devpriv->dio_count = cmd->stop_arg;
else
- priv(dev)->dio_count = 1;
+ devpriv->dio_count = 1;
/* clear over/under run status flags */
writel(RX_UNDERRUN_BIT | RX_OVERRUN_BIT,
- priv(dev)->hpdi_iobase + BOARD_STATUS_REG);
+ devpriv->hpdi_iobase + BOARD_STATUS_REG);
/* enable interrupts */
writel(intr_bit(RX_FULL_INTR),
- priv(dev)->hpdi_iobase + INTERRUPT_CONTROL_REG);
+ devpriv->hpdi_iobase + INTERRUPT_CONTROL_REG);
DEBUG_PRINT("hpdi: starting rx\n");
hpdi_writel(dev, RX_ENABLE_BIT, BOARD_CONTROL_REG);
@@ -871,7 +763,9 @@
static int hpdi_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
{
- if (priv(dev)->dio_config_output)
+ struct hpdi_private *devpriv = dev->private;
+
+ if (devpriv->dio_config_output)
return -EINVAL;
else
return di_cmd(dev, s);
@@ -879,6 +773,7 @@
static void drain_dma_buffers(struct comedi_device *dev, unsigned int channel)
{
+ struct hpdi_private *devpriv = dev->private;
struct comedi_async *async = dev->read_subdev->async;
uint32_t next_transfer_addr;
int j;
@@ -887,37 +782,37 @@
if (channel)
pci_addr_reg =
- priv(dev)->plx9080_iobase + PLX_DMA1_PCI_ADDRESS_REG;
+ devpriv->plx9080_iobase + PLX_DMA1_PCI_ADDRESS_REG;
else
pci_addr_reg =
- priv(dev)->plx9080_iobase + PLX_DMA0_PCI_ADDRESS_REG;
+ devpriv->plx9080_iobase + PLX_DMA0_PCI_ADDRESS_REG;
/* loop until we have read all the full buffers */
j = 0;
for (next_transfer_addr = readl(pci_addr_reg);
(next_transfer_addr <
- le32_to_cpu(priv(dev)->dma_desc[priv(dev)->dma_desc_index].
+ le32_to_cpu(devpriv->dma_desc[devpriv->dma_desc_index].
pci_start_addr)
|| next_transfer_addr >=
- le32_to_cpu(priv(dev)->dma_desc[priv(dev)->dma_desc_index].
- pci_start_addr) + priv(dev)->block_size)
- && j < priv(dev)->num_dma_descriptors; j++) {
+ le32_to_cpu(devpriv->dma_desc[devpriv->dma_desc_index].
+ pci_start_addr) + devpriv->block_size)
+ && j < devpriv->num_dma_descriptors; j++) {
/* transfer data from dma buffer to comedi buffer */
- num_samples = priv(dev)->block_size / sizeof(uint32_t);
+ num_samples = devpriv->block_size / sizeof(uint32_t);
if (async->cmd.stop_src == TRIG_COUNT) {
- if (num_samples > priv(dev)->dio_count)
- num_samples = priv(dev)->dio_count;
- priv(dev)->dio_count -= num_samples;
+ if (num_samples > devpriv->dio_count)
+ num_samples = devpriv->dio_count;
+ devpriv->dio_count -= num_samples;
}
cfc_write_array_to_buffer(dev->read_subdev,
- priv(dev)->desc_dio_buffer[priv(dev)->
+ devpriv->desc_dio_buffer[devpriv->
dma_desc_index],
num_samples * sizeof(uint32_t));
- priv(dev)->dma_desc_index++;
- priv(dev)->dma_desc_index %= priv(dev)->num_dma_descriptors;
+ devpriv->dma_desc_index++;
+ devpriv->dma_desc_index %= devpriv->num_dma_descriptors;
DEBUG_PRINT("next desc addr 0x%lx\n", (unsigned long)
- priv(dev)->dma_desc[priv(dev)->dma_desc_index].
+ devpriv->dma_desc[devpriv->dma_desc_index].
next);
DEBUG_PRINT("pci addr reg 0x%x\n", next_transfer_addr);
}
@@ -927,6 +822,7 @@
static irqreturn_t handle_interrupt(int irq, void *d)
{
struct comedi_device *dev = d;
+ struct hpdi_private *devpriv = dev->private;
struct comedi_subdevice *s = dev->read_subdev;
struct comedi_async *async = s->async;
uint32_t hpdi_intr_status, hpdi_board_status;
@@ -938,26 +834,26 @@
if (!dev->attached)
return IRQ_NONE;
- plx_status = readl(priv(dev)->plx9080_iobase + PLX_INTRCS_REG);
+ plx_status = readl(devpriv->plx9080_iobase + PLX_INTRCS_REG);
if ((plx_status & (ICS_DMA0_A | ICS_DMA1_A | ICS_LIA)) == 0)
return IRQ_NONE;
- hpdi_intr_status = readl(priv(dev)->hpdi_iobase + INTERRUPT_STATUS_REG);
- hpdi_board_status = readl(priv(dev)->hpdi_iobase + BOARD_STATUS_REG);
+ hpdi_intr_status = readl(devpriv->hpdi_iobase + INTERRUPT_STATUS_REG);
+ hpdi_board_status = readl(devpriv->hpdi_iobase + BOARD_STATUS_REG);
async->events = 0;
if (hpdi_intr_status) {
DEBUG_PRINT("hpdi: intr status 0x%x, ", hpdi_intr_status);
writel(hpdi_intr_status,
- priv(dev)->hpdi_iobase + INTERRUPT_STATUS_REG);
+ devpriv->hpdi_iobase + INTERRUPT_STATUS_REG);
}
/* spin lock makes sure no one else changes plx dma control reg */
spin_lock_irqsave(&dev->spinlock, flags);
- dma0_status = readb(priv(dev)->plx9080_iobase + PLX_DMA0_CS_REG);
+ dma0_status = readb(devpriv->plx9080_iobase + PLX_DMA0_CS_REG);
if (plx_status & ICS_DMA0_A) { /* dma chan 0 interrupt */
writeb((dma0_status & PLX_DMA_EN_BIT) | PLX_CLEAR_DMA_INTR_BIT,
- priv(dev)->plx9080_iobase + PLX_DMA0_CS_REG);
+ devpriv->plx9080_iobase + PLX_DMA0_CS_REG);
DEBUG_PRINT("dma0 status 0x%x\n", dma0_status);
if (dma0_status & PLX_DMA_EN_BIT)
@@ -968,10 +864,10 @@
/* spin lock makes sure no one else changes plx dma control reg */
spin_lock_irqsave(&dev->spinlock, flags);
- dma1_status = readb(priv(dev)->plx9080_iobase + PLX_DMA1_CS_REG);
+ dma1_status = readb(devpriv->plx9080_iobase + PLX_DMA1_CS_REG);
if (plx_status & ICS_DMA1_A) { /* XXX *//* dma chan 1 interrupt */
writeb((dma1_status & PLX_DMA_EN_BIT) | PLX_CLEAR_DMA_INTR_BIT,
- priv(dev)->plx9080_iobase + PLX_DMA1_CS_REG);
+ devpriv->plx9080_iobase + PLX_DMA1_CS_REG);
DEBUG_PRINT("dma1 status 0x%x\n", dma1_status);
DEBUG_PRINT(" cleared dma ch1 interrupt\n");
@@ -980,8 +876,8 @@
/* clear possible plx9080 interrupt sources */
if (plx_status & ICS_LDIA) { /* clear local doorbell interrupt */
- plx_bits = readl(priv(dev)->plx9080_iobase + PLX_DBR_OUT_REG);
- writel(plx_bits, priv(dev)->plx9080_iobase + PLX_DBR_OUT_REG);
+ plx_bits = readl(devpriv->plx9080_iobase + PLX_DBR_OUT_REG);
+ writel(plx_bits, devpriv->plx9080_iobase + PLX_DBR_OUT_REG);
DEBUG_PRINT(" cleared local doorbell bits 0x%x\n", plx_bits);
}
@@ -989,7 +885,7 @@
comedi_error(dev, "rx fifo overrun");
async->events |= COMEDI_CB_EOA | COMEDI_CB_ERROR;
DEBUG_PRINT("dma0_status 0x%x\n",
- (int)readb(priv(dev)->plx9080_iobase +
+ (int)readb(devpriv->plx9080_iobase +
PLX_DMA0_CS_REG));
}
@@ -998,7 +894,7 @@
async->events |= COMEDI_CB_EOA | COMEDI_CB_ERROR;
}
- if (priv(dev)->dio_count == 0)
+ if (devpriv->dio_count == 0)
async->events |= COMEDI_CB_EOA;
DEBUG_PRINT("board status 0x%x, ", hpdi_board_status);
@@ -1013,21 +909,24 @@
static void abort_dma(struct comedi_device *dev, unsigned int channel)
{
+ struct hpdi_private *devpriv = dev->private;
unsigned long flags;
/* spinlock for plx dma control/status reg */
spin_lock_irqsave(&dev->spinlock, flags);
- plx9080_abort_dma(priv(dev)->plx9080_iobase, channel);
+ plx9080_abort_dma(devpriv->plx9080_iobase, channel);
spin_unlock_irqrestore(&dev->spinlock, flags);
}
static int hpdi_cancel(struct comedi_device *dev, struct comedi_subdevice *s)
{
+ struct hpdi_private *devpriv = dev->private;
+
hpdi_writel(dev, 0, BOARD_CONTROL_REG);
- writel(0, priv(dev)->hpdi_iobase + INTERRUPT_CONTROL_REG);
+ writel(0, devpriv->hpdi_iobase + INTERRUPT_CONTROL_REG);
abort_dma(dev, 0);
@@ -1037,17 +936,17 @@
static struct comedi_driver gsc_hpdi_driver = {
.driver_name = "gsc_hpdi",
.module = THIS_MODULE,
- .attach = hpdi_attach,
+ .auto_attach = hpdi_auto_attach,
.detach = hpdi_detach,
};
-static int __devinit gsc_hpdi_pci_probe(struct pci_dev *dev,
+static int gsc_hpdi_pci_probe(struct pci_dev *dev,
const struct pci_device_id *ent)
{
return comedi_pci_auto_config(dev, &gsc_hpdi_driver);
}
-static void __devexit gsc_hpdi_pci_remove(struct pci_dev *dev)
+static void gsc_hpdi_pci_remove(struct pci_dev *dev)
{
comedi_pci_auto_unconfig(dev);
}
@@ -1063,7 +962,7 @@
.name = "gsc_hpdi",
.id_table = gsc_hpdi_pci_table,
.probe = gsc_hpdi_pci_probe,
- .remove = __devexit_p(gsc_hpdi_pci_remove)
+ .remove = gsc_hpdi_pci_remove
};
module_comedi_pci_driver(gsc_hpdi_driver, gsc_hpdi_pci_driver);
diff --git a/drivers/staging/comedi/drivers/icp_multi.c b/drivers/staging/comedi/drivers/icp_multi.c
index d696d4d..a91a448 100644
--- a/drivers/staging/comedi/drivers/icp_multi.c
+++ b/drivers/staging/comedi/drivers/icp_multi.c
@@ -494,21 +494,21 @@
return 0;
}
-static int icp_multi_attach_pci(struct comedi_device *dev,
- struct pci_dev *pcidev)
+static int icp_multi_auto_attach(struct comedi_device *dev,
+ unsigned long context_unused)
{
+ struct pci_dev *pcidev = comedi_to_pci_dev(dev);
struct icp_multi_private *devpriv;
struct comedi_subdevice *s;
resource_size_t iobase;
int ret;
- comedi_set_hw_dev(dev, &pcidev->dev);
dev->board_name = dev->driver->driver_name;
- ret = alloc_private(dev, sizeof(*devpriv));
- if (ret < 0)
- return ret;
- devpriv = dev->private;
+ devpriv = kzalloc(sizeof(*devpriv), GFP_KERNEL);
+ if (!devpriv)
+ return -ENOMEM;
+ dev->private = devpriv;
ret = comedi_pci_enable(pcidev, dev->board_name);
if (ret)
@@ -613,17 +613,17 @@
static struct comedi_driver icp_multi_driver = {
.driver_name = "icp_multi",
.module = THIS_MODULE,
- .attach_pci = icp_multi_attach_pci,
+ .auto_attach = icp_multi_auto_attach,
.detach = icp_multi_detach,
};
-static int __devinit icp_multi_pci_probe(struct pci_dev *dev,
+static int icp_multi_pci_probe(struct pci_dev *dev,
const struct pci_device_id *ent)
{
return comedi_pci_auto_config(dev, &icp_multi_driver);
}
-static void __devexit icp_multi_pci_remove(struct pci_dev *dev)
+static void icp_multi_pci_remove(struct pci_dev *dev)
{
comedi_pci_auto_unconfig(dev);
}
@@ -638,7 +638,7 @@
.name = "icp_multi",
.id_table = icp_multi_pci_table,
.probe = icp_multi_pci_probe,
- .remove = __devexit_p(icp_multi_pci_remove),
+ .remove = icp_multi_pci_remove,
};
module_comedi_pci_driver(icp_multi_driver, icp_multi_pci_driver);
diff --git a/drivers/staging/comedi/drivers/ii_pci20kc.c b/drivers/staging/comedi/drivers/ii_pci20kc.c
index 65ff1c9..93584e2 100644
--- a/drivers/staging/comedi/drivers/ii_pci20kc.c
+++ b/drivers/staging/comedi/drivers/ii_pci20kc.c
@@ -156,7 +156,6 @@
union pci20xxx_subdev_private subdev_private[PCI20000_MODULES];
};
-#define devpriv ((struct pci20xxx_private *)dev->private)
#define CHAN (CR_CHAN(it->chanlist[0]))
static int pci20006_init(struct comedi_device *dev, struct comedi_subdevice *s,
@@ -196,6 +195,7 @@
static int pci20xxx_attach(struct comedi_device *dev,
struct comedi_devconfig *it)
{
+ struct pci20xxx_private *devpriv;
unsigned char i;
int ret;
int id;
@@ -206,22 +206,23 @@
if (ret)
return ret;
- ret = alloc_private(dev, sizeof(struct pci20xxx_private));
- if (ret < 0)
- return ret;
+ devpriv = kzalloc(sizeof(*devpriv), GFP_KERNEL);
+ if (!devpriv)
+ return -ENOMEM;
+ dev->private = devpriv;
devpriv->ioaddr = (void __iomem *)(unsigned long)it->options[0];
dev->board_name = "pci20kc";
/* Check PCI-20001 C-2A Carrier Board ID */
if ((readb(devpriv->ioaddr) & PCI20000_ID) != PCI20000_ID) {
- printk(KERN_WARNING "comedi%d: ii_pci20kc PCI-20001"
- " C-2A Carrier Board at base=0x%p not found !\n",
- dev->minor, devpriv->ioaddr);
+ dev_warn(dev->class_dev,
+ "PCI-20001 C-2A Carrier Board at base=0x%p not found !\n",
+ devpriv->ioaddr);
return -EINVAL;
}
- printk(KERN_INFO "comedi%d: ii_pci20kc: PCI-20001 C-2A at base=0x%p\n",
- dev->minor, devpriv->ioaddr);
+ dev_info(dev->class_dev, "PCI-20001 C-2A at base=0x%p\n",
+ devpriv->ioaddr);
for (i = 0; i < PCI20000_MODULES; i++) {
s = &dev->subdevices[i];
@@ -234,23 +235,21 @@
devpriv->ioaddr + (i + 1) * PCI20000_OFFSET;
pci20006_init(dev, s, it->options[2 * i + 2],
it->options[2 * i + 3]);
- printk(KERN_INFO "comedi%d: "
- "ii_pci20kc PCI-20006 module in slot %d\n",
- dev->minor, i + 1);
+ dev_info(dev->class_dev,
+ "PCI-20006 module in slot %d\n", i + 1);
break;
case PCI20341_ID:
sdp->pci20341.iobase =
devpriv->ioaddr + (i + 1) * PCI20000_OFFSET;
pci20341_init(dev, s, it->options[2 * i + 2],
it->options[2 * i + 3]);
- printk(KERN_INFO "comedi%d: "
- "ii_pci20kc PCI-20341 module in slot %d\n",
- dev->minor, i + 1);
+ dev_info(dev->class_dev,
+ "PCI-20341 module in slot %d\n", i + 1);
break;
default:
- printk(KERN_WARNING "ii_pci20kc: unknown module "
- "code 0x%02x in slot %d: module disabled\n",
- id, i); /* XXX this looks like a bug! i + 1 ?? */
+ dev_warn(dev->class_dev,
+ "unknown module code 0x%02x in slot %d: module disabled\n",
+ id, i); /* XXX this looks like a bug! i + 1 ?? */
/* fall through */
case PCI20xxx_EMPTY_ID:
s->type = COMEDI_SUBD_UNUSED;
@@ -346,8 +345,7 @@
writeb(0x00, sdp->iobase + PCI20006_STROBE1);
break;
default:
- printk(KERN_WARNING
- " comedi%d: pci20xxx: ao channel Error!\n", dev->minor);
+ dev_warn(dev->class_dev, "ao channel Error!\n");
return -EINVAL;
}
@@ -462,10 +460,8 @@
eoc = readb(sdp->iobase + PCI20341_STATUS_REG);
}
if (j >= 100) {
- printk(KERN_WARNING
- "comedi%d: pci20xxx: "
- "AI interrupt channel %i polling exit !\n",
- dev->minor, i);
+ dev_warn(dev->class_dev,
+ "AI interrupt channel %i polling exit !\n", i);
return -EINVAL;
}
lo = readb(sdp->iobase + PCI20341_LDATA);
@@ -541,6 +537,7 @@
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
+ struct pci20xxx_private *devpriv = dev->private;
unsigned int mask = data[0];
s->state &= ~mask;
@@ -571,6 +568,7 @@
static void pci20xxx_dio_config(struct comedi_device *dev,
struct comedi_subdevice *s)
{
+ struct pci20xxx_private *devpriv = dev->private;
unsigned char control_01;
unsigned char control_23;
unsigned char buffer;
@@ -627,6 +625,8 @@
#if 0
static void pci20xxx_do(struct comedi_device *dev, struct comedi_subdevice *s)
{
+ struct pci20xxx_private *devpriv = dev->private;
+
/* XXX if the channel is configured for input, does this
do bad things? */
/* XXX it would be a good idea to only update the registers
@@ -641,9 +641,10 @@
static unsigned int pci20xxx_di(struct comedi_device *dev,
struct comedi_subdevice *s)
{
- /* XXX same note as above */
+ struct pci20xxx_private *devpriv = dev->private;
unsigned int bits;
+ /* XXX same note as above */
bits = readb(devpriv->ioaddr + PCI20000_DIO_0);
bits |= readb(devpriv->ioaddr + PCI20000_DIO_1) << 8;
bits |= readb(devpriv->ioaddr + PCI20000_DIO_2) << 16;
diff --git a/drivers/staging/comedi/drivers/jr3_pci.c b/drivers/staging/comedi/drivers/jr3_pci.c
index 4a108ea..c756a35 100644
--- a/drivers/staging/comedi/drivers/jr3_pci.c
+++ b/drivers/staging/comedi/drivers/jr3_pci.c
@@ -21,24 +21,26 @@
*/
/*
-Driver: jr3_pci
-Description: JR3/PCI force sensor board
-Author: Anders Blomdell <anders.blomdell@control.lth.se>
-Status: works
-Devices: [JR3] PCI force sensor board (jr3_pci)
-
- The DSP on the board requires initialization code, which can
- be loaded by placing it in /lib/firmware/comedi.
- The initialization code should be somewhere on the media you got
- with your card. One version is available from http://www.comedi.org
- in the comedi_nonfree_firmware tarball.
-
- Configuration options:
- [0] - PCI bus number - if bus number and slot number are 0,
- then driver search for first unused card
- [1] - PCI slot number
-
-*/
+ * Driver: jr3_pci
+ * Description: JR3/PCI force sensor board
+ * Author: Anders Blomdell <anders.blomdell@control.lth.se>
+ * Updated: Thu, 01 Nov 2012 17:34:55 +0000
+ * Status: works
+ * Devices: [JR3] PCI force sensor board (jr3_pci)
+ *
+ * Configuration options:
+ * None
+ *
+ * Manual configuration of comedi devices is not supported by this
+ * driver; supported PCI devices are configured as comedi devices
+ * automatically.
+ *
+ * The DSP on the board requires initialization code, which can be
+ * loaded by placing it in /lib/firmware/comedi. The initialization
+ * code should be somewhere on the media you got with your card. One
+ * version is available from http://www.comedi.org in the
+ * comedi_nonfree_firmware tarball. The file is called "jr3pci.idm".
+ */
#include "../comedidev.h"
@@ -59,22 +61,18 @@
#define PCI_DEVICE_ID_JR3_4_CHANNEL 0x3114
struct jr3_pci_dev_private {
-
- struct pci_dev *pci_dev;
- int pci_enabled;
- volatile struct jr3_t *iobase;
+ struct jr3_t __iomem *iobase;
int n_channels;
struct timer_list timer;
};
struct poll_delay_t {
-
int min;
int max;
};
struct jr3_pci_subdev_private {
- volatile struct jr3_channel *channel;
+ struct jr3_channel __iomem *channel;
unsigned long next_time_min;
unsigned long next_time_max;
enum { state_jr3_poll,
@@ -98,15 +96,15 @@
};
/* Hotplug firmware loading stuff */
-static int comedi_load_firmware(struct comedi_device *dev, char *name,
+static int comedi_load_firmware(struct comedi_device *dev, const char *name,
int (*cb)(struct comedi_device *dev,
const u8 *data, size_t size))
{
+ struct pci_dev *pcidev = comedi_to_pci_dev(dev);
int result = 0;
const struct firmware *fw;
char *firmware_path;
static const char *prefix = "comedi/";
- struct jr3_pci_dev_private *devpriv = dev->private;
firmware_path = kmalloc(strlen(prefix) + strlen(name) + 1, GFP_KERNEL);
if (!firmware_path) {
@@ -115,8 +113,7 @@
firmware_path[0] = '\0';
strcat(firmware_path, prefix);
strcat(firmware_path, name);
- result = request_firmware(&fw, firmware_path,
- &devpriv->pci_dev->dev);
+ result = request_firmware(&fw, firmware_path, &pcidev->dev);
if (result == 0) {
if (!cb)
result = -EINVAL;
@@ -138,7 +135,7 @@
return result;
}
-static int is_complete(volatile struct jr3_channel *channel)
+static int is_complete(struct jr3_channel __iomem *channel)
{
return get_s16(&channel->command_word0) == 0;
}
@@ -150,14 +147,13 @@
} link[8];
};
-static void set_transforms(volatile struct jr3_channel *channel,
+static void set_transforms(struct jr3_channel __iomem *channel,
struct transform_t transf, short num)
{
int i;
num &= 0x000f; /* Make sure that 0 <= num <= 15 */
for (i = 0; i < 8; i++) {
-
set_u16(&channel->transforms[num].link[i].link_type,
transf.link[i].link_type);
udelay(1);
@@ -169,18 +165,18 @@
}
}
-static void use_transform(volatile struct jr3_channel *channel,
+static void use_transform(struct jr3_channel __iomem *channel,
short transf_num)
{
set_s16(&channel->command_word0, 0x0500 + (transf_num & 0x000f));
}
-static void use_offset(volatile struct jr3_channel *channel, short offset_num)
+static void use_offset(struct jr3_channel __iomem *channel, short offset_num)
{
set_s16(&channel->command_word0, 0x0600 + (offset_num & 0x000f));
}
-static void set_offset(volatile struct jr3_channel *channel)
+static void set_offset(struct jr3_channel __iomem *channel)
{
set_s16(&channel->command_word0, 0x0700);
}
@@ -194,13 +190,9 @@
s16 mz;
};
-static void set_full_scales(volatile struct jr3_channel *channel,
+static void set_full_scales(struct jr3_channel __iomem *channel,
struct six_axis_t full_scale)
{
- printk("%d %d %d %d %d %d\n",
- full_scale.fx,
- full_scale.fy,
- full_scale.fz, full_scale.mx, full_scale.my, full_scale.mz);
set_s16(&channel->full_scale.fx, full_scale.fx);
set_s16(&channel->full_scale.fy, full_scale.fy);
set_s16(&channel->full_scale.fz, full_scale.fz);
@@ -210,7 +202,7 @@
set_s16(&channel->command_word0, 0x0a00);
}
-static struct six_axis_t get_min_full_scales(volatile struct jr3_channel
+static struct six_axis_t get_min_full_scales(struct jr3_channel __iomem
*channel)
{
struct six_axis_t result;
@@ -223,7 +215,7 @@
return result;
}
-static struct six_axis_t get_max_full_scales(volatile struct jr3_channel
+static struct six_axis_t get_max_full_scales(struct jr3_channel __iomem
*channel)
{
struct six_axis_t result;
@@ -273,71 +265,53 @@
} else {
int F = 0;
switch (axis) {
- case 0:{
- F = get_s16
- (&p->channel->filter
- [filter].fx);
- }
+ case 0:
+ F = get_s16(&p->channel->
+ filter[filter].fx);
break;
- case 1:{
- F = get_s16
- (&p->channel->filter
- [filter].fy);
- }
+ case 1:
+ F = get_s16(&p->channel->
+ filter[filter].fy);
break;
- case 2:{
- F = get_s16
- (&p->channel->filter
- [filter].fz);
- }
+ case 2:
+ F = get_s16(&p->channel->
+ filter[filter].fz);
break;
- case 3:{
- F = get_s16
- (&p->channel->filter
- [filter].mx);
- }
+ case 3:
+ F = get_s16(&p->channel->
+ filter[filter].mx);
break;
- case 4:{
- F = get_s16
- (&p->channel->filter
- [filter].my);
- }
+ case 4:
+ F = get_s16(&p->channel->
+ filter[filter].my);
break;
- case 5:{
- F = get_s16
- (&p->channel->filter
- [filter].mz);
- }
+ case 5:
+ F = get_s16(&p->channel->
+ filter[filter].mz);
break;
- case 6:{
- F = get_s16
- (&p->channel->filter
- [filter].v1);
- }
+ case 6:
+ F = get_s16(&p->channel->
+ filter[filter].v1);
break;
- case 7:{
- F = get_s16
- (&p->channel->filter
- [filter].v2);
- }
+ case 7:
+ F = get_s16(&p->channel->
+ filter[filter].v2);
break;
}
data[i] = F + 0x4000;
}
} else if (channel == 56) {
- if (p->state != state_jr3_done) {
+ if (p->state != state_jr3_done)
data[i] = 0;
- } else {
+ else
data[i] =
- get_u16(&p->channel->model_no);
- }
+ get_u16(&p->channel->model_no);
} else if (channel == 57) {
- if (p->state != state_jr3_done) {
+ if (p->state != state_jr3_done)
data[i] = 0;
- } else {
+ else
data[i] =
- get_u16(&p->channel->serial_no);
- }
+ get_u16(&p->channel->serial_no);
}
}
}
@@ -368,8 +342,8 @@
int result = 0;
if (pos && val) {
/* Skip over non hex */
- for (; *pos < size && !isxdigit(data[*pos]); (*pos)++) {
- }
+ for (; *pos < size && !isxdigit(data[*pos]); (*pos)++)
+ ;
/* Collect value */
*val = 0;
for (; *pos < size; (*pos)++) {
@@ -378,14 +352,15 @@
if (value >= 0) {
result = 1;
*val = (*val << 4) + value;
- } else
+ } else {
break;
+ }
}
}
return result;
}
-static int jr3_download_firmware(struct comedi_device *dev, const u8 * data,
+static int jr3_download_firmware(struct comedi_device *dev, const u8 *data,
size_t size)
{
/*
@@ -429,37 +404,38 @@
pos = 0;
while (more) {
unsigned int count, addr;
- more = more
- && read_idm_word(data, size, &pos, &count);
+ more = more &&
+ read_idm_word(data, size, &pos, &count);
if (more && count == 0xffff)
break;
- more = more
- && read_idm_word(data, size, &pos, &addr);
+ more = more &&
+ read_idm_word(data, size, &pos, &addr);
dev_dbg(dev->class_dev,
"Loading#%d %4.4x bytes at %4.4x\n",
i, count, addr);
while (more && count > 0) {
if (addr & 0x4000) {
- /* 16 bit data, never seen in real life!! */
+ /* 16 bit data, never seen
+ * in real life!! */
unsigned int data1;
- more = more
- && read_idm_word(data,
+ more = more &&
+ read_idm_word(data,
size, &pos,
&data1);
count--;
- /* printk("jr3_data, not tested\n"); */
- /* jr3[addr + 0x20000 * pnum] = data1; */
+ /* jr3[addr + 0x20000 * pnum] =
+ data1; */
} else {
/* Download 24 bit program */
unsigned int data1, data2;
- more = more
- && read_idm_word(data,
+ more = more &&
+ read_idm_word(data,
size, &pos,
&data1);
- more = more
- && read_idm_word(data, size,
+ more = more &&
+ read_idm_word(data, size,
&pos,
&data2);
count -= 2;
@@ -474,7 +450,6 @@
[i].program_high
[addr], data2);
udelay(1);
-
}
}
addr++;
@@ -492,213 +467,152 @@
int i;
if (p) {
- volatile struct jr3_channel *channel = p->channel;
+ struct jr3_channel __iomem *channel = p->channel;
int errors = get_u16(&channel->errors);
- if (errors != p->errors) {
- printk("Errors: %x -> %x\n", p->errors, errors);
+ if (errors != p->errors)
p->errors = errors;
- }
- if (errors & (watch_dog | watch_dog2 | sensor_change)) {
+
+ if (errors & (watch_dog | watch_dog2 | sensor_change))
/* Sensor communication lost, force poll mode */
p->state = state_jr3_poll;
- }
switch (p->state) {
- case state_jr3_poll:{
+ case state_jr3_poll: {
u16 model_no = get_u16(&channel->model_no);
u16 serial_no = get_u16(&channel->serial_no);
if ((errors & (watch_dog | watch_dog2)) ||
model_no == 0 || serial_no == 0) {
-/*
- * Still no sensor, keep on polling. Since it takes up to 10 seconds
- * for offsets to stabilize, polling each second should suffice.
- */
+ /*
+ * Still no sensor, keep on polling.
+ * Since it takes up to 10 seconds
+ * for offsets to stabilize, polling
+ * each second should suffice.
+ */
result = poll_delay_min_max(1000, 2000);
} else {
p->retries = 0;
p->state =
- state_jr3_init_wait_for_offset;
+ state_jr3_init_wait_for_offset;
result = poll_delay_min_max(1000, 2000);
}
}
break;
- case state_jr3_init_wait_for_offset:{
- p->retries++;
- if (p->retries < 10) {
- /* Wait for offeset to stabilize (< 10 s according to manual) */
- result = poll_delay_min_max(1000, 2000);
- } else {
- struct transform_t transf;
+ case state_jr3_init_wait_for_offset:
+ p->retries++;
+ if (p->retries < 10) {
+ /* Wait for offeset to stabilize
+ * (< 10 s according to manual) */
+ result = poll_delay_min_max(1000, 2000);
+ } else {
+ struct transform_t transf;
- p->model_no =
- get_u16(&channel->model_no);
- p->serial_no =
- get_u16(&channel->serial_no);
+ p->model_no = get_u16(&channel->model_no);
+ p->serial_no = get_u16(&channel->serial_no);
- printk
- ("Setting transform for channel %d\n",
- p->channel_no);
- printk("Sensor Model = %i\n",
- p->model_no);
- printk("Sensor Serial = %i\n",
- p->serial_no);
-
- /* Transformation all zeros */
- for (i = 0; i < ARRAY_SIZE(transf.link); i++) {
- transf.link[i].link_type =
- (enum link_types)0;
- transf.link[i].link_amount = 0;
- }
-
- set_transforms(channel, transf, 0);
- use_transform(channel, 0);
- p->state =
- state_jr3_init_transform_complete;
- result = poll_delay_min_max(20, 100); /* Allow 20 ms for completion */
+ /* Transformation all zeros */
+ for (i = 0; i < ARRAY_SIZE(transf.link); i++) {
+ transf.link[i].link_type =
+ (enum link_types)0;
+ transf.link[i].link_amount = 0;
}
- } break;
- case state_jr3_init_transform_complete:{
- if (!is_complete(channel)) {
- printk
- ("state_jr3_init_transform_complete complete = %d\n",
- is_complete(channel));
- result = poll_delay_min_max(20, 100);
- } else {
- /* Set full scale */
- struct six_axis_t min_full_scale;
- struct six_axis_t max_full_scale;
- min_full_scale =
- get_min_full_scales(channel);
- printk("Obtained Min. Full Scales:\n");
- printk(KERN_DEBUG "%i ", (min_full_scale).fx);
- printk(KERN_CONT "%i ", (min_full_scale).fy);
- printk(KERN_CONT "%i ", (min_full_scale).fz);
- printk(KERN_CONT "%i ", (min_full_scale).mx);
- printk(KERN_CONT "%i ", (min_full_scale).my);
- printk(KERN_CONT "%i ", (min_full_scale).mz);
- printk(KERN_CONT "\n");
-
- max_full_scale =
- get_max_full_scales(channel);
- printk("Obtained Max. Full Scales:\n");
- printk(KERN_DEBUG "%i ", (max_full_scale).fx);
- printk(KERN_CONT "%i ", (max_full_scale).fy);
- printk(KERN_CONT "%i ", (max_full_scale).fz);
- printk(KERN_CONT "%i ", (max_full_scale).mx);
- printk(KERN_CONT "%i ", (max_full_scale).my);
- printk(KERN_CONT "%i ", (max_full_scale).mz);
- printk(KERN_CONT "\n");
-
- set_full_scales(channel,
- max_full_scale);
-
- p->state =
- state_jr3_init_set_full_scale_complete;
- result = poll_delay_min_max(20, 100); /* Allow 20 ms for completion */
- }
+ set_transforms(channel, transf, 0);
+ use_transform(channel, 0);
+ p->state = state_jr3_init_transform_complete;
+ /* Allow 20 ms for completion */
+ result = poll_delay_min_max(20, 100);
}
break;
- case state_jr3_init_set_full_scale_complete:{
- if (!is_complete(channel)) {
- printk
- ("state_jr3_init_set_full_scale_complete complete = %d\n",
- is_complete(channel));
- result = poll_delay_min_max(20, 100);
- } else {
- volatile struct force_array *full_scale;
+ case state_jr3_init_transform_complete:
+ if (!is_complete(channel)) {
+ result = poll_delay_min_max(20, 100);
+ } else {
+ /* Set full scale */
+ struct six_axis_t min_full_scale;
+ struct six_axis_t max_full_scale;
- /* Use ranges in kN or we will overflow arount 2000N! */
- full_scale = &channel->full_scale;
- p->range[0].range.min =
- -get_s16(&full_scale->fx) * 1000;
- p->range[0].range.max =
- get_s16(&full_scale->fx) * 1000;
- p->range[1].range.min =
- -get_s16(&full_scale->fy) * 1000;
- p->range[1].range.max =
- get_s16(&full_scale->fy) * 1000;
- p->range[2].range.min =
- -get_s16(&full_scale->fz) * 1000;
- p->range[2].range.max =
- get_s16(&full_scale->fz) * 1000;
- p->range[3].range.min =
- -get_s16(&full_scale->mx) * 100;
- p->range[3].range.max =
- get_s16(&full_scale->mx) * 100;
- p->range[4].range.min =
- -get_s16(&full_scale->my) * 100;
- p->range[4].range.max =
- get_s16(&full_scale->my) * 100;
- p->range[5].range.min =
- -get_s16(&full_scale->mz) * 100;
- p->range[5].range.max =
- get_s16(&full_scale->mz) * 100;
- p->range[6].range.min = -get_s16(&full_scale->v1) * 100; /* ?? */
- p->range[6].range.max = get_s16(&full_scale->v1) * 100; /* ?? */
- p->range[7].range.min = -get_s16(&full_scale->v2) * 100; /* ?? */
- p->range[7].range.max = get_s16(&full_scale->v2) * 100; /* ?? */
- p->range[8].range.min = 0;
- p->range[8].range.max = 65535;
+ min_full_scale = get_min_full_scales(channel);
+ max_full_scale = get_max_full_scales(channel);
+ set_full_scales(channel, max_full_scale);
- {
- int i;
- for (i = 0; i < 9; i++) {
- printk("%d %d - %d\n",
- i,
- p->
- range[i].range.
- min,
- p->
- range[i].range.
- max);
- }
- }
-
- use_offset(channel, 0);
- p->state =
- state_jr3_init_use_offset_complete;
- result = poll_delay_min_max(40, 100); /* Allow 40 ms for completion */
- }
+ p->state =
+ state_jr3_init_set_full_scale_complete;
+ /* Allow 20 ms for completion */
+ result = poll_delay_min_max(20, 100);
}
break;
- case state_jr3_init_use_offset_complete:{
- if (!is_complete(channel)) {
- printk
- ("state_jr3_init_use_offset_complete complete = %d\n",
- is_complete(channel));
- result = poll_delay_min_max(20, 100);
- } else {
- printk
- ("Default offsets %d %d %d %d %d %d\n",
- get_s16(&channel->offsets.fx),
- get_s16(&channel->offsets.fy),
- get_s16(&channel->offsets.fz),
- get_s16(&channel->offsets.mx),
- get_s16(&channel->offsets.my),
- get_s16(&channel->offsets.mz));
+ case state_jr3_init_set_full_scale_complete:
+ if (!is_complete(channel)) {
+ result = poll_delay_min_max(20, 100);
+ } else {
+ struct force_array __iomem *full_scale;
- set_s16(&channel->offsets.fx, 0);
- set_s16(&channel->offsets.fy, 0);
- set_s16(&channel->offsets.fz, 0);
- set_s16(&channel->offsets.mx, 0);
- set_s16(&channel->offsets.my, 0);
- set_s16(&channel->offsets.mz, 0);
+ /* Use ranges in kN or we will
+ * overflow around 2000N! */
+ full_scale = &channel->full_scale;
+ p->range[0].range.min =
+ -get_s16(&full_scale->fx) * 1000;
+ p->range[0].range.max =
+ get_s16(&full_scale->fx) * 1000;
+ p->range[1].range.min =
+ -get_s16(&full_scale->fy) * 1000;
+ p->range[1].range.max =
+ get_s16(&full_scale->fy) * 1000;
+ p->range[2].range.min =
+ -get_s16(&full_scale->fz) * 1000;
+ p->range[2].range.max =
+ get_s16(&full_scale->fz) * 1000;
+ p->range[3].range.min =
+ -get_s16(&full_scale->mx) * 100;
+ p->range[3].range.max =
+ get_s16(&full_scale->mx) * 100;
+ p->range[4].range.min =
+ -get_s16(&full_scale->my) * 100;
+ p->range[4].range.max =
+ get_s16(&full_scale->my) * 100;
+ p->range[5].range.min =
+ -get_s16(&full_scale->mz) * 100;
+ p->range[5].range.max =
+ get_s16(&full_scale->mz) * 100; /* ?? */
+ p->range[6].range.min =
+ -get_s16(&full_scale->v1) * 100;/* ?? */
+ p->range[6].range.max =
+ get_s16(&full_scale->v1) * 100; /* ?? */
+ p->range[7].range.min =
+ -get_s16(&full_scale->v2) * 100;/* ?? */
+ p->range[7].range.max =
+ get_s16(&full_scale->v2) * 100; /* ?? */
+ p->range[8].range.min = 0;
+ p->range[8].range.max = 65535;
- set_offset(channel);
-
- p->state = state_jr3_done;
- }
+ use_offset(channel, 0);
+ p->state = state_jr3_init_use_offset_complete;
+ /* Allow 40 ms for completion */
+ result = poll_delay_min_max(40, 100);
}
break;
- case state_jr3_done:{
- poll_delay_min_max(10000, 20000);
+ case state_jr3_init_use_offset_complete:
+ if (!is_complete(channel)) {
+ result = poll_delay_min_max(20, 100);
+ } else {
+ set_s16(&channel->offsets.fx, 0);
+ set_s16(&channel->offsets.fy, 0);
+ set_s16(&channel->offsets.fz, 0);
+ set_s16(&channel->offsets.mx, 0);
+ set_s16(&channel->offsets.my, 0);
+ set_s16(&channel->offsets.mz, 0);
+
+ set_offset(channel);
+
+ p->state = state_jr3_done;
}
break;
- default:{
- poll_delay_min_max(1000, 2000);
- }
+ case state_jr3_done:
+ poll_delay_min_max(10000, 20000);
+ break;
+ default:
+ poll_delay_min_max(1000, 2000);
break;
}
}
@@ -720,22 +634,21 @@
/* Poll all channels that are ready to be polled */
for (i = 0; i < devpriv->n_channels; i++) {
struct jr3_pci_subdev_private *subdevpriv =
- dev->subdevices[i].private;
+ dev->subdevices[i].private;
if (now > subdevpriv->next_time_min) {
struct poll_delay_t sub_delay;
sub_delay = jr3_pci_poll_subdevice(&dev->subdevices[i]);
subdevpriv->next_time_min =
- jiffies + msecs_to_jiffies(sub_delay.min);
+ jiffies + msecs_to_jiffies(sub_delay.min);
subdevpriv->next_time_max =
- jiffies + msecs_to_jiffies(sub_delay.max);
- if (sub_delay.max && sub_delay.max < delay) {
-/*
-* Wake up as late as possible -> poll as many channels as possible
-* at once
-*/
+ jiffies + msecs_to_jiffies(sub_delay.max);
+ if (sub_delay.max && sub_delay.max < delay)
+ /*
+ * Wake up as late as possible ->
+ * poll as many channels as possible at once.
+ */
delay = sub_delay.max;
- }
}
}
spin_unlock_irqrestore(&dev->spinlock, flags);
@@ -744,17 +657,14 @@
add_timer(&devpriv->timer);
}
-static int jr3_pci_attach(struct comedi_device *dev,
- struct comedi_devconfig *it)
+static int jr3_pci_auto_attach(struct comedi_device *dev,
+ unsigned long context_unused)
{
- int result = 0;
- struct pci_dev *card = NULL;
- int opt_bus, opt_slot, i;
+ int result;
+ struct pci_dev *pcidev = comedi_to_pci_dev(dev);
+ int i;
struct jr3_pci_dev_private *devpriv;
- opt_bus = it->options[0];
- opt_slot = it->options[1];
-
if (sizeof(struct jr3_channel) != 0xc00) {
dev_err(dev->class_dev,
"sizeof(struct jr3_channel) = %x [expected %x]\n",
@@ -762,70 +672,42 @@
return -EINVAL;
}
- result = alloc_private(dev, sizeof(struct jr3_pci_dev_private));
- if (result < 0)
+ devpriv = kzalloc(sizeof(*devpriv), GFP_KERNEL);
+ if (!devpriv)
return -ENOMEM;
- card = NULL;
- devpriv = dev->private;
+ dev->private = devpriv;
+
init_timer(&devpriv->timer);
- while (1) {
- card = pci_get_device(PCI_VENDOR_ID_JR3, PCI_ANY_ID, card);
- if (card == NULL) {
- /* No card found */
- break;
- } else {
- switch (card->device) {
- case PCI_DEVICE_ID_JR3_1_CHANNEL:{
- devpriv->n_channels = 1;
- }
- break;
- case PCI_DEVICE_ID_JR3_1_CHANNEL_NEW:{
- devpriv->n_channels = 1;
- }
- break;
- case PCI_DEVICE_ID_JR3_2_CHANNEL:{
- devpriv->n_channels = 2;
- }
- break;
- case PCI_DEVICE_ID_JR3_3_CHANNEL:{
- devpriv->n_channels = 3;
- }
- break;
- case PCI_DEVICE_ID_JR3_4_CHANNEL:{
- devpriv->n_channels = 4;
- }
- break;
- default:{
- devpriv->n_channels = 0;
- }
- }
- if (devpriv->n_channels >= 1) {
- if (opt_bus == 0 && opt_slot == 0) {
- /* Take first available card */
- break;
- } else if (opt_bus == card->bus->number &&
- opt_slot == PCI_SLOT(card->devfn)) {
- /* Take requested card */
- break;
- }
- }
- }
+ switch (pcidev->device) {
+ case PCI_DEVICE_ID_JR3_1_CHANNEL:
+ case PCI_DEVICE_ID_JR3_1_CHANNEL_NEW:
+ devpriv->n_channels = 1;
+ break;
+ case PCI_DEVICE_ID_JR3_2_CHANNEL:
+ devpriv->n_channels = 2;
+ break;
+ case PCI_DEVICE_ID_JR3_3_CHANNEL:
+ devpriv->n_channels = 3;
+ break;
+ case PCI_DEVICE_ID_JR3_4_CHANNEL:
+ devpriv->n_channels = 4;
+ break;
+ default:
+ dev_err(dev->class_dev, "jr3_pci: pci %s not supported\n",
+ pci_name(pcidev));
+ return -EINVAL;
+ break;
}
- if (!card) {
- dev_err(dev->class_dev, "no jr3_pci found\n");
- return -EIO;
- } else {
- devpriv->pci_dev = card;
- dev->board_name = "jr3_pci";
- }
+ dev->board_name = "jr3_pci";
- result = comedi_pci_enable(card, "jr3_pci");
+ result = comedi_pci_enable(pcidev, "jr3_pci");
if (result < 0)
- return -EIO;
+ return result;
- devpriv->pci_enabled = 1;
- devpriv->iobase = ioremap(pci_resource_start(card, 0),
- offsetof(struct jr3_t, channel[devpriv->n_channels]));
+ dev->iobase = 1; /* the "detach" needs this */
+ devpriv->iobase = ioremap(pci_resource_start(pcidev, 0),
+ offsetof(struct jr3_t,
+ channel[devpriv->n_channels]));
if (!devpriv->iobase)
return -ENOMEM;
@@ -840,7 +722,8 @@
dev->subdevices[i].n_chan = 8 * 7 + 2;
dev->subdevices[i].insn_read = jr3_pci_ai_insn_read;
dev->subdevices[i].private =
- kzalloc(sizeof(struct jr3_pci_subdev_private), GFP_KERNEL);
+ kzalloc(sizeof(struct jr3_pci_subdev_private),
+ GFP_KERNEL);
if (dev->subdevices[i].private) {
struct jr3_pci_subdev_private *p;
int j;
@@ -849,8 +732,8 @@
p->channel = &devpriv->iobase->channel[i].data;
dev_dbg(dev->class_dev, "p->channel %p %p (%tx)\n",
p->channel, devpriv->iobase,
- ((char *)(p->channel) -
- (char *)(devpriv->iobase)));
+ ((char __iomem *)p->channel -
+ (char __iomem *)devpriv->iobase));
p->channel_no = i;
for (j = 0; j < 8; j++) {
int k;
@@ -870,15 +753,15 @@
p->range[8].range.max = 65536;
p->range_table_list[56] =
- (struct comedi_lrange *)&p->range[8];
+ (struct comedi_lrange *)&p->range[8];
p->range_table_list[57] =
- (struct comedi_lrange *)&p->range[8];
+ (struct comedi_lrange *)&p->range[8];
p->maxdata_list[56] = 0xffff;
p->maxdata_list[57] = 0xffff;
/* Channel specific range and maxdata */
dev->subdevices[i].range_table = NULL;
dev->subdevices[i].range_table_list =
- p->range_table_list;
+ p->range_table_list;
dev->subdevices[i].maxdata = 0;
dev->subdevices[i].maxdata_list = p->maxdata_list;
}
@@ -891,19 +774,20 @@
dev_dbg(dev->class_dev, "Firmare load %d\n", result);
if (result < 0)
- goto out;
-/*
- * TODO: use firmware to load preferred offset tables. Suggested
- * format:
- * model serial Fx Fy Fz Mx My Mz\n
- *
- * comedi_load_firmware(dev, "jr3_offsets_table", jr3_download_firmware);
- */
+ return result;
+ /*
+ * TODO: use firmware to load preferred offset tables. Suggested
+ * format:
+ * model serial Fx Fy Fz Mx My Mz\n
+ *
+ * comedi_load_firmware(dev, "jr3_offsets_table",
+ * jr3_download_firmware);
+ */
-/*
- * It takes a few milliseconds for software to settle as much as we
- * can read firmware version
- */
+ /*
+ * It takes a few milliseconds for software to settle as much as we
+ * can read firmware version
+ */
msleep_interruptible(25);
for (i = 0; i < 0x18; i++) {
dev_dbg(dev->class_dev, "%c\n",
@@ -924,13 +808,13 @@
devpriv->timer.expires = jiffies + msecs_to_jiffies(1000);
add_timer(&devpriv->timer);
-out:
return result;
}
static void jr3_pci_detach(struct comedi_device *dev)
{
int i;
+ struct pci_dev *pcidev = comedi_to_pci_dev(dev);
struct jr3_pci_dev_private *devpriv = dev->private;
if (devpriv) {
@@ -941,28 +825,26 @@
kfree(dev->subdevices[i].private);
}
if (devpriv->iobase)
- iounmap((void *)devpriv->iobase);
- if (devpriv->pci_enabled)
- comedi_pci_disable(devpriv->pci_dev);
- if (devpriv->pci_dev)
- pci_dev_put(devpriv->pci_dev);
+ iounmap(devpriv->iobase);
+ if (dev->iobase)
+ comedi_pci_disable(pcidev);
}
}
static struct comedi_driver jr3_pci_driver = {
.driver_name = "jr3_pci",
.module = THIS_MODULE,
- .attach = jr3_pci_attach,
+ .auto_attach = jr3_pci_auto_attach,
.detach = jr3_pci_detach,
};
-static int __devinit jr3_pci_pci_probe(struct pci_dev *dev,
+static int jr3_pci_pci_probe(struct pci_dev *dev,
const struct pci_device_id *ent)
{
return comedi_pci_auto_config(dev, &jr3_pci_driver);
}
-static void __devexit jr3_pci_pci_remove(struct pci_dev *dev)
+static void jr3_pci_pci_remove(struct pci_dev *dev)
{
comedi_pci_auto_unconfig(dev);
}
@@ -981,7 +863,7 @@
.name = "jr3_pci",
.id_table = jr3_pci_pci_table,
.probe = jr3_pci_pci_probe,
- .remove = __devexit_p(jr3_pci_pci_remove),
+ .remove = jr3_pci_pci_remove,
};
module_comedi_pci_driver(jr3_pci_driver, jr3_pci_pci_driver);
diff --git a/drivers/staging/comedi/drivers/jr3_pci.h b/drivers/staging/comedi/drivers/jr3_pci.h
index 9c42653..3317f7a 100644
--- a/drivers/staging/comedi/drivers/jr3_pci.h
+++ b/drivers/staging/comedi/drivers/jr3_pci.h
@@ -2,22 +2,22 @@
* is 16 bits, but aligned on a 32 bit PCI boundary
*/
-static inline u16 get_u16(volatile const u32 * p)
+static inline u16 get_u16(const u32 __iomem *p)
{
- return (u16) readl(p);
+ return (u16)readl(p);
}
-static inline void set_u16(volatile u32 * p, u16 val)
+static inline void set_u16(u32 __iomem *p, u16 val)
{
writel(val, p);
}
-static inline s16 get_s16(volatile const s32 * p)
+static inline s16 get_s16(const s32 __iomem *p)
{
- return (s16) readl(p);
+ return (s16)readl(p);
}
-static inline void set_s16(volatile s32 * p, s16 val)
+static inline void set_s16(s32 __iomem *p, s16 val)
{
writel(val, p);
}
diff --git a/drivers/staging/comedi/drivers/ke_counter.c b/drivers/staging/comedi/drivers/ke_counter.c
index e867b72..19c9428 100644
--- a/drivers/staging/comedi/drivers/ke_counter.c
+++ b/drivers/staging/comedi/drivers/ke_counter.c
@@ -36,28 +36,8 @@
#include "../comedidev.h"
-#define CNT_DRIVER_NAME "ke_counter"
-#define PCI_VENDOR_ID_KOLTER 0x1001
#define CNT_CARD_DEVICE_ID 0x0014
-/*-- board specification structure ------------------------------------------*/
-
-struct cnt_board_struct {
-
- const char *name;
- int device_id;
- int cnt_channel_nbr;
- int cnt_bits;
-};
-
-static const struct cnt_board_struct cnt_boards[] = {
- {
- .name = CNT_DRIVER_NAME,
- .device_id = CNT_CARD_DEVICE_ID,
- .cnt_channel_nbr = 3,
- .cnt_bits = 24}
-};
-
/*-- counter write ----------------------------------------------------------*/
/* This should be used only for resetting the counters; maybe it is better
@@ -107,34 +87,14 @@
return 1;
}
-static const void *cnt_find_boardinfo(struct comedi_device *dev,
- struct pci_dev *pcidev)
+static int cnt_auto_attach(struct comedi_device *dev,
+ unsigned long context_unused)
{
- const struct cnt_board_struct *board;
- int i;
-
- for (i = 0; i < ARRAY_SIZE(cnt_boards); i++) {
- board = &cnt_boards[i];
- if (board->device_id == pcidev->device)
- return board;
- }
- return NULL;
-}
-
-static int cnt_attach_pci(struct comedi_device *dev,
- struct pci_dev *pcidev)
-{
- const struct cnt_board_struct *board;
+ struct pci_dev *pcidev = comedi_to_pci_dev(dev);
struct comedi_subdevice *s;
int ret;
- comedi_set_hw_dev(dev, &pcidev->dev);
-
- board = cnt_find_boardinfo(dev, pcidev);
- if (!board)
- return -ENODEV;
- dev->board_ptr = board;
- dev->board_name = board->name;
+ dev->board_name = dev->driver->driver_name;
ret = comedi_pci_enable(pcidev, dev->board_name);
if (ret)
@@ -150,8 +110,8 @@
s->type = COMEDI_SUBD_COUNTER;
s->subdev_flags = SDF_READABLE /* | SDF_COMMON */ ;
- s->n_chan = board->cnt_channel_nbr;
- s->maxdata = (1 << board->cnt_bits) - 1;
+ s->n_chan = 3;
+ s->maxdata = 0x00ffffff;
s->insn_read = cnt_rinsn;
s->insn_write = cnt_winsn;
@@ -182,17 +142,17 @@
static struct comedi_driver ke_counter_driver = {
.driver_name = "ke_counter",
.module = THIS_MODULE,
- .attach_pci = cnt_attach_pci,
+ .auto_attach = cnt_auto_attach,
.detach = cnt_detach,
};
-static int __devinit ke_counter_pci_probe(struct pci_dev *dev,
+static int ke_counter_pci_probe(struct pci_dev *dev,
const struct pci_device_id *ent)
{
return comedi_pci_auto_config(dev, &ke_counter_driver);
}
-static void __devexit ke_counter_pci_remove(struct pci_dev *dev)
+static void ke_counter_pci_remove(struct pci_dev *dev)
{
comedi_pci_auto_unconfig(dev);
}
@@ -207,7 +167,7 @@
.name = "ke_counter",
.id_table = ke_counter_pci_table,
.probe = ke_counter_pci_probe,
- .remove = __devexit_p(ke_counter_pci_remove),
+ .remove = ke_counter_pci_remove,
};
module_comedi_pci_driver(ke_counter_driver, ke_counter_pci_driver);
diff --git a/drivers/staging/comedi/drivers/me4000.c b/drivers/staging/comedi/drivers/me4000.c
index 22db35d..3c4b022 100644
--- a/drivers/staging/comedi/drivers/me4000.c
+++ b/drivers/staging/comedi/drivers/me4000.c
@@ -60,8 +60,6 @@
#include "me4000_fw.h"
#endif
-#define PCI_VENDOR_ID_MEILHAUS 0x1402
-
#define PCI_DEVICE_ID_MEILHAUS_ME4650 0x4650
#define PCI_DEVICE_ID_MEILHAUS_ME4660 0x4660
#define PCI_DEVICE_ID_MEILHAUS_ME4660I 0x4661
@@ -971,28 +969,23 @@
if (err)
return 2;
- /*
- * Stage 3. Check if arguments are generally valid.
- */
+ /* Step 3: check if arguments are trivially valid */
+
if (cmd->chanlist_len < 1) {
- dev_err(dev->class_dev, "No channel list\n");
cmd->chanlist_len = 1;
- err++;
+ err |= -EINVAL;
}
if (init_ticks < 66) {
- dev_err(dev->class_dev, "Start arg to low\n");
cmd->start_arg = 2000;
- err++;
+ err |= -EINVAL;
}
if (scan_ticks && scan_ticks < 67) {
- dev_err(dev->class_dev, "Scan begin arg to low\n");
cmd->scan_begin_arg = 2031;
- err++;
+ err |= -EINVAL;
}
if (chan_ticks < 66) {
- dev_err(dev->class_dev, "Convert arg to low\n");
cmd->convert_arg = 2000;
- err++;
+ err |= -EINVAL;
}
if (err)
@@ -1570,26 +1563,25 @@
return NULL;
}
-static int me4000_attach_pci(struct comedi_device *dev,
- struct pci_dev *pcidev)
+static int me4000_auto_attach(struct comedi_device *dev,
+ unsigned long context_unused)
{
+ struct pci_dev *pcidev = comedi_to_pci_dev(dev);
const struct me4000_board *thisboard;
struct me4000_info *info;
struct comedi_subdevice *s;
int result;
- comedi_set_hw_dev(dev, &pcidev->dev);
-
thisboard = me4000_find_boardinfo(dev, pcidev);
if (!thisboard)
return -ENODEV;
dev->board_ptr = thisboard;
dev->board_name = thisboard->name;
- result = alloc_private(dev, sizeof(*info));
- if (result)
- return result;
- info = dev->private;
+ info = kzalloc(sizeof(*info), GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+ dev->private = info;
result = comedi_pci_enable(pcidev, dev->board_name);
if (result)
@@ -1732,17 +1724,17 @@
static struct comedi_driver me4000_driver = {
.driver_name = "me4000",
.module = THIS_MODULE,
- .attach_pci = me4000_attach_pci,
+ .auto_attach = me4000_auto_attach,
.detach = me4000_detach,
};
-static int __devinit me4000_pci_probe(struct pci_dev *dev,
+static int me4000_pci_probe(struct pci_dev *dev,
const struct pci_device_id *ent)
{
return comedi_pci_auto_config(dev, &me4000_driver);
}
-static void __devexit me4000_pci_remove(struct pci_dev *dev)
+static void me4000_pci_remove(struct pci_dev *dev)
{
comedi_pci_auto_unconfig(dev);
}
@@ -1769,7 +1761,7 @@
.name = "me4000",
.id_table = me4000_pci_table,
.probe = me4000_pci_probe,
- .remove = __devexit_p(me4000_pci_remove),
+ .remove = me4000_pci_remove,
};
module_comedi_pci_driver(me4000_driver, me4000_pci_driver);
diff --git a/drivers/staging/comedi/drivers/me_daq.c b/drivers/staging/comedi/drivers/me_daq.c
index 2ce0b14..ce8e3d3 100644
--- a/drivers/staging/comedi/drivers/me_daq.c
+++ b/drivers/staging/comedi/drivers/me_daq.c
@@ -1,47 +1,38 @@
/*
-
- comedi/drivers/me_daq.c
-
- Hardware driver for Meilhaus data acquisition cards:
-
- ME-2000i, ME-2600i, ME-3000vm1
-
- Copyright (C) 2002 Michael Hillmann <hillmann@syscongroup.de>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
+ * comedi/drivers/me_daq.c
+ * Hardware driver for Meilhaus data acquisition cards:
+ * ME-2000i, ME-2600i, ME-3000vm1
+ *
+ * Copyright (C) 2002 Michael Hillmann <hillmann@syscongroup.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
/*
-Driver: me_daq
-Description: Meilhaus PCI data acquisition cards
-Author: Michael Hillmann <hillmann@syscongroup.de>
-Devices: [Meilhaus] ME-2600i (me_daq), ME-2000i
-Status: experimental
-
-Supports:
-
- Analog Output
-
-Configuration options:
-
- [0] - PCI bus number (optional)
- [1] - PCI slot number (optional)
-
- If bus/slot is not specified, the first available PCI
- device will be used.
-*/
+ * Driver: me_daq
+ * Description: Meilhaus PCI data acquisition cards
+ * Devices: (Meilhaus) ME-2600i [me-2600i]
+ * (Meilhaus) ME-2000i [me-2000i]
+ * Author: Michael Hillmann <hillmann@syscongroup.de>
+ * Status: experimental
+ *
+ * Configuration options: not applicable, uses PCI auto config
+ *
+ * Supports:
+ * Analog Input, Analog Output, Digital I/O
+ */
#include <linux/interrupt.h>
#include <linux/sched.h>
@@ -50,7 +41,6 @@
#define ME2600_FIRMWARE "me2600_firmware.bin"
-#define PCI_VENDOR_ID_MEILHAUS 0x1402
#define ME2000_DEVICE_ID 0x2000
#define ME2600_DEVICE_ID 0x2600
@@ -136,97 +126,47 @@
#define ME_COUNTER_STARTDATA_B 0x0022 /* - | W */
#define ME_COUNTER_VALUE_B 0x0022 /* R | - */
-static const struct comedi_lrange me2000_ai_range = {
- 8,
- {
- BIP_RANGE(10),
- BIP_RANGE(5),
- BIP_RANGE(2.5),
- BIP_RANGE(1.25),
- UNI_RANGE(10),
- UNI_RANGE(5),
- UNI_RANGE(2.5),
- UNI_RANGE(1.25)
- }
+static const struct comedi_lrange me_ai_range = {
+ 8, {
+ BIP_RANGE(10),
+ BIP_RANGE(5),
+ BIP_RANGE(2.5),
+ BIP_RANGE(1.25),
+ UNI_RANGE(10),
+ UNI_RANGE(5),
+ UNI_RANGE(2.5),
+ UNI_RANGE(1.25)
+ }
};
-static const struct comedi_lrange me2600_ai_range = {
- 8,
- {
- BIP_RANGE(10),
- BIP_RANGE(5),
- BIP_RANGE(2.5),
- BIP_RANGE(1.25),
- UNI_RANGE(10),
- UNI_RANGE(5),
- UNI_RANGE(2.5),
- UNI_RANGE(1.25)
- }
+static const struct comedi_lrange me_ao_range = {
+ 3, {
+ BIP_RANGE(10),
+ BIP_RANGE(5),
+ UNI_RANGE(10)
+ }
};
-static const struct comedi_lrange me2600_ao_range = {
- 3,
- {
- BIP_RANGE(10),
- BIP_RANGE(5),
- UNI_RANGE(10)
- }
-};
-
-/* Board specification structure */
struct me_board {
- const char *name; /* driver name */
+ const char *name;
int device_id;
- int ao_channel_nbr; /* DA config */
- int ao_resolution;
- int ao_resolution_mask;
- const struct comedi_lrange *ao_range_list;
- int ai_channel_nbr; /* AD config */
- int ai_resolution;
- int ai_resolution_mask;
- const struct comedi_lrange *ai_range_list;
- int dio_channel_nbr; /* DIO config */
+ int has_ao;
};
static const struct me_board me_boards[] = {
{
- .name = "me-2600i",
- .device_id = ME2600_DEVICE_ID,
- /* Analog Output */
- .ao_channel_nbr = 4,
- .ao_resolution = 12,
- .ao_resolution_mask = 0x0fff,
- .ao_range_list = &me2600_ao_range,
- .ai_channel_nbr = 16,
- /* Analog Input */
- .ai_resolution = 12,
- .ai_resolution_mask = 0x0fff,
- .ai_range_list = &me2600_ai_range,
- .dio_channel_nbr = 32,
- },
- {
- .name = "me-2000i",
- .device_id = ME2000_DEVICE_ID,
- /* Analog Output */
- .ao_channel_nbr = 0,
- .ao_resolution = 0,
- .ao_resolution_mask = 0,
- .ao_range_list = NULL,
- .ai_channel_nbr = 16,
- /* Analog Input */
- .ai_resolution = 12,
- .ai_resolution_mask = 0x0fff,
- .ai_range_list = &me2000_ai_range,
- .dio_channel_nbr = 32,
- }
+ .name = "me-2600i",
+ .device_id = ME2600_DEVICE_ID,
+ .has_ao = 1,
+ }, {
+ .name = "me-2000i",
+ .device_id = ME2000_DEVICE_ID,
+ }
};
-/* Private data structure */
struct me_private_data {
void __iomem *plx_regbase; /* PLX configuration base address */
void __iomem *me_regbase; /* Base address of the Meilhaus card */
- unsigned long plx_regbase_size; /* Size of PLX configuration space */
- unsigned long me_regbase_size; /* Size of Meilhaus space */
unsigned short control_1; /* Mirror of CONTROL_1 register */
unsigned short control_2; /* Mirror of CONTROL_2 register */
@@ -234,110 +174,101 @@
int ao_readback[4]; /* Mirror of analog output data */
};
-#define dev_private ((struct me_private_data *)dev->private)
-
-/*
- * ------------------------------------------------------------------
- *
- * Helpful functions
- *
- * ------------------------------------------------------------------
- */
static inline void sleep(unsigned sec)
{
current->state = TASK_INTERRUPTIBLE;
schedule_timeout(sec * HZ);
}
-/*
- * ------------------------------------------------------------------
- *
- * DIGITAL INPUT/OUTPUT SECTION
- *
- * ------------------------------------------------------------------
- */
static int me_dio_insn_config(struct comedi_device *dev,
struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data)
+ struct comedi_insn *insn,
+ unsigned int *data)
{
- int bits;
- int mask = 1 << CR_CHAN(insn->chanspec);
+ struct me_private_data *dev_private = dev->private;
+ unsigned int mask = 1 << CR_CHAN(insn->chanspec);
+ unsigned int bits;
+ unsigned int port;
- /* calculate port */
- if (mask & 0x0000ffff) { /* Port A in use */
+ if (mask & 0x0000ffff) {
bits = 0x0000ffff;
-
- /* Enable Port A */
- dev_private->control_2 |= ENABLE_PORT_A;
- writew(dev_private->control_2,
- dev_private->me_regbase + ME_CONTROL_2);
- } else { /* Port B in use */
-
+ port = ENABLE_PORT_A;
+ } else {
bits = 0xffff0000;
-
- /* Enable Port B */
- dev_private->control_2 |= ENABLE_PORT_B;
- writew(dev_private->control_2,
- dev_private->me_regbase + ME_CONTROL_2);
+ port = ENABLE_PORT_B;
}
- if (data[0]) {
- /* Config port as output */
- s->io_bits |= bits;
- } else {
- /* Config port as input */
+ switch (data[0]) {
+ case INSN_CONFIG_DIO_INPUT:
s->io_bits &= ~bits;
+ dev_private->control_2 &= ~port;
+ break;
+ case INSN_CONFIG_DIO_OUTPUT:
+ s->io_bits |= bits;
+ dev_private->control_2 |= port;
+ break;
+ case INSN_CONFIG_DIO_QUERY:
+ data[1] = (s->io_bits & bits) ? COMEDI_OUTPUT : COMEDI_INPUT;
+ return insn->n;
+ break;
+ default:
+ return -EINVAL;
}
- return 1;
-}
-
-/* Digital instant input/outputs */
-static int me_dio_insn_bits(struct comedi_device *dev,
- struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data)
-{
- unsigned int mask = data[0];
- s->state &= ~mask;
- s->state |= (mask & data[1]);
-
- mask &= s->io_bits;
- if (mask & 0x0000ffff) { /* Port A */
- writew((s->state & 0xffff),
- dev_private->me_regbase + ME_DIO_PORT_A);
- } else {
- data[1] &= ~0x0000ffff;
- data[1] |= readw(dev_private->me_regbase + ME_DIO_PORT_A);
- }
-
- if (mask & 0xffff0000) { /* Port B */
- writew(((s->state >> 16) & 0xffff),
- dev_private->me_regbase + ME_DIO_PORT_B);
- } else {
- data[1] &= ~0xffff0000;
- data[1] |= readw(dev_private->me_regbase + ME_DIO_PORT_B) << 16;
- }
+ /* Update the port configuration */
+ writew(dev_private->control_2, dev_private->me_regbase + ME_CONTROL_2);
return insn->n;
}
-/*
- * ------------------------------------------------------------------
- *
- * ANALOG INPUT SECTION
- *
- * ------------------------------------------------------------------
- */
+static int me_dio_insn_bits(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
+{
+ struct me_private_data *dev_private = dev->private;
+ void __iomem *mmio_porta = dev_private->me_regbase + ME_DIO_PORT_A;
+ void __iomem *mmio_portb = dev_private->me_regbase + ME_DIO_PORT_B;
+ unsigned int mask = data[0];
+ unsigned int bits = data[1];
+ unsigned int val;
-/* Analog instant input */
+ mask &= s->io_bits; /* only update the COMEDI_OUTPUT channels */
+ if (mask) {
+ s->state &= ~mask;
+ s->state |= (bits & mask);
+
+ if (mask & 0x0000ffff)
+ writew((s->state & 0xffff), mmio_porta);
+ if (mask & 0xffff0000)
+ writew(((s->state >> 16) & 0xffff), mmio_portb);
+ }
+
+ if (s->io_bits & 0x0000ffff)
+ val = s->state & 0xffff;
+ else
+ val = readw(mmio_porta);
+
+ if (s->io_bits & 0xffff0000)
+ val |= (s->state & 0xffff0000);
+ else
+ val |= (readw(mmio_portb) << 16);
+
+ data[1] = val;
+
+ return insn->n;
+}
+
static int me_ai_insn_read(struct comedi_device *dev,
struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data)
+ struct comedi_insn *insn,
+ unsigned int *data)
{
- unsigned short value;
- int chan = CR_CHAN((&insn->chanspec)[0]);
- int rang = CR_RANGE((&insn->chanspec)[0]);
- int aref = CR_AREF((&insn->chanspec)[0]);
+ struct me_private_data *dev_private = dev->private;
+ unsigned int chan = CR_CHAN(insn->chanspec);
+ unsigned int rang = CR_RANGE(insn->chanspec);
+ unsigned int aref = CR_AREF(insn->chanspec);
+ unsigned short val;
int i;
/* stop any running conversion */
@@ -356,15 +287,11 @@
writew(dev_private->control_2, dev_private->me_regbase + ME_CONTROL_2);
/* write to channel list fifo */
- /* b3:b0 are the channel number */
- value = chan & 0x0f;
- /* b5:b4 are the channel gain */
- value |= (rang & 0x03) << 4;
- /* b6 channel polarity */
- value |= (rang & 0x04) << 4;
- /* b7 single or differential */
- value |= ((aref & AREF_DIFF) ? 0x80 : 0);
- writew(value & 0xff, dev_private->me_regbase + ME_CHANNEL_LIST);
+ val = chan & 0x0f; /* b3:b0 channel */
+ val |= (rang & 0x03) << 4; /* b5:b4 gain */
+ val |= (rang & 0x04) << 4; /* b6 polarity */
+ val |= ((aref & AREF_DIFF) ? 0x80 : 0); /* b7 differential */
+ writew(val & 0xff, dev_private->me_regbase + ME_CHANNEL_LIST);
/* set ADC mode to software trigger */
dev_private->control_1 |= SOFTWARE_TRIGGERED_ADC;
@@ -380,12 +307,11 @@
/* get value from ADC fifo */
if (i) {
- data[0] =
- (readw(dev_private->me_regbase +
- ME_READ_AD_FIFO) ^ 0x800) & 0x0FFF;
+ val = readw(dev_private->me_regbase + ME_READ_AD_FIFO);
+ val = (val ^ 0x800) & 0x0fff;
+ data[0] = val;
} else {
- printk(KERN_ERR "comedi%d: Cannot get single value\n",
- dev->minor);
+ dev_err(dev->class_dev, "Cannot get single value\n");
return -EIO;
}
@@ -396,55 +322,14 @@
return 1;
}
-/*
- * ------------------------------------------------------------------
- *
- * HARDWARE TRIGGERED ANALOG INPUT SECTION
- *
- * ------------------------------------------------------------------
- */
-
-/* Cancel analog input autoscan */
-static int me_ai_cancel(struct comedi_device *dev, struct comedi_subdevice *s)
-{
- /* disable interrupts */
-
- /* stop any running conversion */
- dev_private->control_1 &= 0xFFFC;
- writew(dev_private->control_1, dev_private->me_regbase + ME_CONTROL_1);
-
- return 0;
-}
-
-/* Test analog input command */
-static int me_ai_do_cmd_test(struct comedi_device *dev,
- struct comedi_subdevice *s, struct comedi_cmd *cmd)
-{
- return 0;
-}
-
-/* Analog input command */
-static int me_ai_do_cmd(struct comedi_device *dev,
- struct comedi_subdevice *s)
-{
- return 0;
-}
-
-/*
- * ------------------------------------------------------------------
- *
- * ANALOG OUTPUT SECTION
- *
- * ------------------------------------------------------------------
- */
-
-/* Analog instant output */
static int me_ao_insn_write(struct comedi_device *dev,
struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data)
+ struct comedi_insn *insn,
+ unsigned int *data)
{
- int chan;
- int rang;
+ struct me_private_data *dev_private = dev->private;
+ unsigned int chan = CR_CHAN(insn->chanspec);
+ unsigned int rang = CR_RANGE(insn->chanspec);
int i;
/* Enable all DAC */
@@ -457,9 +342,6 @@
/* Set dac-control register */
for (i = 0; i < insn->n; i++) {
- chan = CR_CHAN((&insn->chanspec)[i]);
- rang = CR_RANGE((&insn->chanspec)[i]);
-
/* clear bits for this channel */
dev_private->dac_control &= ~(0x0880 >> chan);
if (rang == 0)
@@ -477,7 +359,6 @@
/* Set data register */
for (i = 0; i < insn->n; i++) {
- chan = CR_CHAN((&insn->chanspec)[i]);
writew((data[0] & s->maxdata),
dev_private->me_regbase + ME_DAC_DATA_A + (chan << 1));
dev_private->ao_readback[chan] = (data[0] & s->maxdata);
@@ -486,36 +367,28 @@
/* Update dac with data registers */
readw(dev_private->me_regbase + ME_DAC_UPDATE);
- return i;
+ return insn->n;
}
-/* Analog output readback */
static int me_ao_insn_read(struct comedi_device *dev,
- struct comedi_subdevice *s, struct comedi_insn *insn,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
unsigned int *data)
{
+ struct me_private_data *dev_private = dev->private;
+ unsigned int chan = CR_CHAN(insn->chanspec);
int i;
- for (i = 0; i < insn->n; i++) {
- data[i] =
- dev_private->ao_readback[CR_CHAN((&insn->chanspec)[i])];
- }
+ for (i = 0; i < insn->n; i++)
+ data[i] = dev_private->ao_readback[chan];
- return 1;
+ return insn->n;
}
-/*
- * ------------------------------------------------------------------
- *
- * INITIALISATION SECTION
- *
- * ------------------------------------------------------------------
- */
-
-/* Xilinx firmware download for card: ME-2600i */
static int me2600_xilinx_download(struct comedi_device *dev,
const u8 *data, size_t size)
{
+ struct me_private_data *dev_private = dev->private;
unsigned int value;
unsigned int file_length;
unsigned int i;
@@ -566,8 +439,7 @@
if (value & 0x20) {
/* Disable interrupt */
writel(0x00, dev_private->plx_regbase + PLX_INTCSR);
- printk(KERN_ERR "comedi%d: Xilinx download failed\n",
- dev->minor);
+ dev_err(dev->class_dev, "Xilinx download failed\n");
return -EIO;
}
@@ -596,9 +468,10 @@
return ret;
}
-/* Reset device */
static int me_reset(struct comedi_device *dev)
{
+ struct me_private_data *dev_private = dev->private;
+
/* Reset board */
writew(0x00, dev_private->me_regbase + ME_CONTROL_1);
writew(0x00, dev_private->me_regbase + ME_CONTROL_2);
@@ -627,20 +500,14 @@
return NULL;
}
-static int me_attach_pci(struct comedi_device *dev, struct pci_dev *pcidev)
+static int me_auto_attach(struct comedi_device *dev,
+ unsigned long context_unused)
{
+ struct pci_dev *pcidev = comedi_to_pci_dev(dev);
const struct me_board *board;
+ struct me_private_data *dev_private;
struct comedi_subdevice *s;
- resource_size_t plx_regbase_tmp;
- unsigned long plx_regbase_size_tmp;
- resource_size_t me_regbase_tmp;
- unsigned long me_regbase_size_tmp;
- resource_size_t swap_regbase_tmp;
- unsigned long swap_regbase_size_tmp;
- resource_size_t regbase_tmp;
- int result, error;
-
- comedi_set_hw_dev(dev, &pcidev->dev);
+ int ret;
board = me_find_boardinfo(dev, pcidev);
if (!board)
@@ -648,123 +515,71 @@
dev->board_ptr = board;
dev->board_name = board->name;
- /* Allocate private memory */
- if (alloc_private(dev, sizeof(struct me_private_data)) < 0)
+ dev_private = kzalloc(sizeof(*dev_private), GFP_KERNEL);
+ if (!dev_private)
+ return -ENOMEM;
+ dev->private = dev_private;
+
+ ret = comedi_pci_enable(pcidev, dev->board_name);
+ if (ret)
+ return ret;
+ dev->iobase = 1; /* detach needs this */
+
+ dev_private->plx_regbase = ioremap(pci_resource_start(pcidev, 0),
+ pci_resource_len(pcidev, 0));
+ if (!dev_private->plx_regbase)
return -ENOMEM;
- /* Enable PCI device and request PCI regions */
- if (comedi_pci_enable(pcidev, dev->board_name) < 0) {
- printk(KERN_ERR "comedi%d: Failed to enable PCI device and "
- "request regions\n", dev->minor);
- return -EIO;
- }
-
- /* Read PLX register base address [PCI_BASE_ADDRESS #0]. */
- plx_regbase_tmp = pci_resource_start(pcidev, 0);
- plx_regbase_size_tmp = pci_resource_len(pcidev, 0);
- dev_private->plx_regbase =
- ioremap(plx_regbase_tmp, plx_regbase_size_tmp);
- dev_private->plx_regbase_size = plx_regbase_size_tmp;
- if (!dev_private->plx_regbase) {
- printk("comedi%d: Failed to remap I/O memory\n", dev->minor);
+ dev_private->me_regbase = ioremap(pci_resource_start(pcidev, 2),
+ pci_resource_len(pcidev, 2));
+ if (!dev_private->me_regbase)
return -ENOMEM;
- }
-
- /* Read Swap base address [PCI_BASE_ADDRESS #5]. */
-
- swap_regbase_tmp = pci_resource_start(pcidev, 5);
- swap_regbase_size_tmp = pci_resource_len(pcidev, 5);
-
- if (!swap_regbase_tmp)
- printk(KERN_ERR "comedi%d: Swap not present\n", dev->minor);
-
- /*---------------------------------------------- Workaround start ---*/
- if (plx_regbase_tmp & 0x0080) {
- printk(KERN_ERR "comedi%d: PLX-Bug detected\n", dev->minor);
-
- if (swap_regbase_tmp) {
- regbase_tmp = plx_regbase_tmp;
- plx_regbase_tmp = swap_regbase_tmp;
- swap_regbase_tmp = regbase_tmp;
-
- result = pci_write_config_dword(pcidev,
- PCI_BASE_ADDRESS_0,
- plx_regbase_tmp);
- if (result != PCIBIOS_SUCCESSFUL)
- return -EIO;
-
- result = pci_write_config_dword(pcidev,
- PCI_BASE_ADDRESS_5,
- swap_regbase_tmp);
- if (result != PCIBIOS_SUCCESSFUL)
- return -EIO;
- } else {
- plx_regbase_tmp -= 0x80;
- result = pci_write_config_dword(pcidev,
- PCI_BASE_ADDRESS_0,
- plx_regbase_tmp);
- if (result != PCIBIOS_SUCCESSFUL)
- return -EIO;
- }
- }
- /*--------------------------------------------- Workaround end -----*/
-
- /* Read Meilhaus register base address [PCI_BASE_ADDRESS #2]. */
-
- me_regbase_tmp = pci_resource_start(pcidev, 2);
- me_regbase_size_tmp = pci_resource_len(pcidev, 2);
- dev_private->me_regbase_size = me_regbase_size_tmp;
- dev_private->me_regbase = ioremap(me_regbase_tmp, me_regbase_size_tmp);
- if (!dev_private->me_regbase) {
- printk(KERN_ERR "comedi%d: Failed to remap I/O memory\n",
- dev->minor);
- return -ENOMEM;
- }
/* Download firmware and reset card */
if (board->device_id == ME2600_DEVICE_ID) {
- result = me2600_upload_firmware(dev);
- if (result < 0)
- return result;
+ ret = me2600_upload_firmware(dev);
+ if (ret < 0)
+ return ret;
}
me_reset(dev);
- error = comedi_alloc_subdevices(dev, 3);
- if (error)
- return error;
+ ret = comedi_alloc_subdevices(dev, 3);
+ if (ret)
+ return ret;
s = &dev->subdevices[0];
- s->type = COMEDI_SUBD_AI;
- s->subdev_flags = SDF_READABLE | SDF_COMMON | SDF_CMD_READ;
- s->n_chan = board->ai_channel_nbr;
- s->maxdata = board->ai_resolution_mask;
- s->len_chanlist = board->ai_channel_nbr;
- s->range_table = board->ai_range_list;
- s->cancel = me_ai_cancel;
- s->insn_read = me_ai_insn_read;
- s->do_cmdtest = me_ai_do_cmd_test;
- s->do_cmd = me_ai_do_cmd;
+ s->type = COMEDI_SUBD_AI;
+ s->subdev_flags = SDF_READABLE | SDF_COMMON;
+ s->n_chan = 16;
+ s->maxdata = 0x0fff;
+ s->len_chanlist = 16;
+ s->range_table = &me_ai_range;
+ s->insn_read = me_ai_insn_read;
s = &dev->subdevices[1];
- s->type = COMEDI_SUBD_AO;
- s->subdev_flags = SDF_WRITEABLE | SDF_COMMON;
- s->n_chan = board->ao_channel_nbr;
- s->maxdata = board->ao_resolution_mask;
- s->len_chanlist = board->ao_channel_nbr;
- s->range_table = board->ao_range_list;
- s->insn_read = me_ao_insn_read;
- s->insn_write = me_ao_insn_write;
+ if (board->has_ao) {
+ s->type = COMEDI_SUBD_AO;
+ s->subdev_flags = SDF_WRITEABLE | SDF_COMMON;
+ s->n_chan = 4;
+ s->maxdata = 0x0fff;
+ s->len_chanlist = 4;
+ s->range_table = &me_ao_range;
+ s->insn_read = me_ao_insn_read;
+ s->insn_write = me_ao_insn_write;
+ } else {
+ s->type = COMEDI_SUBD_UNUSED;
+ }
s = &dev->subdevices[2];
- s->type = COMEDI_SUBD_DIO;
- s->subdev_flags = SDF_READABLE | SDF_WRITEABLE;
- s->n_chan = board->dio_channel_nbr;
- s->maxdata = 1;
- s->len_chanlist = board->dio_channel_nbr;
- s->range_table = &range_digital;
- s->insn_bits = me_dio_insn_bits;
- s->insn_config = me_dio_insn_config;
- s->io_bits = 0;
+ s->type = COMEDI_SUBD_DIO;
+ s->subdev_flags = SDF_READABLE | SDF_WRITEABLE;
+ s->n_chan = 32;
+ s->maxdata = 1;
+ s->len_chanlist = 32;
+ s->range_table = &range_digital;
+ s->insn_bits = me_dio_insn_bits;
+ s->insn_config = me_dio_insn_config;
+ s->io_bits = 0;
dev_info(dev->class_dev, "%s: %s attached\n",
dev->driver->driver_name, dev->board_name);
@@ -775,6 +590,7 @@
static void me_detach(struct comedi_device *dev)
{
struct pci_dev *pcidev = comedi_to_pci_dev(dev);
+ struct me_private_data *dev_private = dev->private;
if (dev_private) {
if (dev_private->me_regbase) {
@@ -785,26 +601,25 @@
iounmap(dev_private->plx_regbase);
}
if (pcidev) {
- if (dev_private->plx_regbase_size)
+ if (dev->iobase)
comedi_pci_disable(pcidev);
- pci_dev_put(pcidev);
}
}
static struct comedi_driver me_daq_driver = {
.driver_name = "me_daq",
.module = THIS_MODULE,
- .attach_pci = me_attach_pci,
+ .auto_attach = me_auto_attach,
.detach = me_detach,
};
-static int __devinit me_daq_pci_probe(struct pci_dev *dev,
+static int me_daq_pci_probe(struct pci_dev *dev,
const struct pci_device_id *ent)
{
return comedi_pci_auto_config(dev, &me_daq_driver);
}
-static void __devexit me_daq_pci_remove(struct pci_dev *dev)
+static void me_daq_pci_remove(struct pci_dev *dev)
{
comedi_pci_auto_unconfig(dev);
}
@@ -820,7 +635,7 @@
.name = "me_daq",
.id_table = me_daq_pci_table,
.probe = me_daq_pci_probe,
- .remove = __devexit_p(me_daq_pci_remove),
+ .remove = me_daq_pci_remove,
};
module_comedi_pci_driver(me_daq_driver, me_daq_pci_driver);
diff --git a/drivers/staging/comedi/drivers/mpc624.c b/drivers/staging/comedi/drivers/mpc624.c
index f8b7fae..67dc5ad 100644
--- a/drivers/staging/comedi/drivers/mpc624.c
+++ b/drivers/staging/comedi/drivers/mpc624.c
@@ -122,13 +122,12 @@
#define MPC624_SPEED_6_875_Hz \
(MPC624_OSR4 | MPC624_OSR3 | MPC624_OSR2 | MPC624_OSR1 | MPC624_OSR0)
/* -------------------------------------------------------------------------- */
-struct skel_private {
+struct mpc624_private {
/* set by mpc624_attach() from driver's parameters */
unsigned long int ulConvertionRate;
};
-#define devpriv ((struct skel_private *)dev->private)
/* -------------------------------------------------------------------------- */
static const struct comedi_lrange range_mpc624_bipolar1 = {
1,
@@ -155,6 +154,7 @@
struct comedi_subdevice *s, struct comedi_insn *insn,
unsigned int *data)
{
+ struct mpc624_private *devpriv = dev->private;
int n, i;
unsigned long int data_in, data_out;
unsigned char ucPort;
@@ -283,6 +283,7 @@
static int mpc624_attach(struct comedi_device *dev, struct comedi_devconfig *it)
{
+ struct mpc624_private *devpriv;
struct comedi_subdevice *s;
unsigned long iobase;
int ret;
@@ -297,9 +298,10 @@
dev->iobase = iobase;
dev->board_name = "mpc624";
- /* Private structure initialization */
- if (alloc_private(dev, sizeof(struct skel_private)) < 0)
+ devpriv = kzalloc(sizeof(*devpriv), GFP_KERNEL);
+ if (!devpriv)
return -ENOMEM;
+ dev->private = devpriv;
switch (it->options[1]) {
case 0:
diff --git a/drivers/staging/comedi/drivers/mpc8260cpm.c b/drivers/staging/comedi/drivers/mpc8260cpm.c
deleted file mode 100644
index c0c3329..0000000
--- a/drivers/staging/comedi/drivers/mpc8260cpm.c
+++ /dev/null
@@ -1,164 +0,0 @@
-/*
- comedi/drivers/mpc8260.c
- driver for digital I/O pins on the MPC 8260 CPM module
-
- COMEDI - Linux Control and Measurement Device Interface
- Copyright (C) 2000,2001 David A. Schleef <ds@schleef.org>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-*/
-/*
-Driver: mpc8260cpm
-Description: MPC8260 CPM module generic digital I/O lines
-Devices: [Motorola] MPC8260 CPM (mpc8260cpm)
-Author: ds
-Status: experimental
-Updated: Sat, 16 Mar 2002 17:34:48 -0800
-
-This driver is specific to the Motorola MPC8260 processor, allowing
-you to access the processor's generic digital I/O lines.
-
-It is apparently missing some code.
-*/
-
-#include "../comedidev.h"
-
-extern unsigned long mpc8260_dio_reserved[4];
-
-struct mpc8260cpm_private {
-
- int data;
-
-};
-
-#define devpriv ((struct mpc8260cpm_private *)dev->private)
-
-static unsigned long *cpm_pdat(int port)
-{
- switch (port) {
- case 0:
- return &io->iop_pdata;
- case 1:
- return &io->iop_pdatb;
- case 2:
- return &io->iop_pdatc;
- case 3:
- return &io->iop_pdatd;
- }
-}
-
-static int mpc8260cpm_dio_config(struct comedi_device *dev,
- struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data)
-{
- int n;
- unsigned int d;
- unsigned int mask;
- int port;
-
- port = (int)s->private;
- mask = 1 << CR_CHAN(insn->chanspec);
- if (mask & cpm_reserved_bits[port]) {
- return -EINVAL;
- }
-
- switch (data[0]) {
- case INSN_CONFIG_DIO_OUTPUT:
- s->io_bits |= mask;
- break;
- case INSN_CONFIG_DIO_INPUT:
- s->io_bits &= ~mask;
- break;
- case INSN_CONFIG_DIO_QUERY:
- data[1] = (s->io_bits & mask) ? COMEDI_OUTPUT : COMEDI_INPUT;
- return insn->n;
- break;
- default:
- return -EINVAL;
- }
-
- switch (port) {
- case 0:
- return &io->iop_pdira;
- case 1:
- return &io->iop_pdirb;
- case 2:
- return &io->iop_pdirc;
- case 3:
- return &io->iop_pdird;
- }
-
- return 1;
-}
-
-static int mpc8260cpm_dio_bits(struct comedi_device *dev,
- struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data)
-{
- int port;
- unsigned long *p;
-
- p = cpm_pdat((int)s->private);
-
- return insn->n;
-}
-
-static int mpc8260cpm_attach(struct comedi_device *dev,
- struct comedi_devconfig *it)
-{
- struct comedi_subdevice *s;
- int i;
- int ret;
-
- printk("comedi%d: mpc8260cpm: ", dev->minor);
-
- dev->board_ptr = mpc8260cpm_boards + dev->board;
-
- dev->board_name = thisboard->name;
-
- if (alloc_private(dev, sizeof(struct mpc8260cpm_private)) < 0)
- return -ENOMEM;
-
- ret =comedi_alloc_subdevices(dev, 4);
- if (ret)
- return ret;
-
- for (i = 0; i < 4; i++) {
- s = &dev->subdevices[i];
- s->type = COMEDI_SUBD_DIO;
- s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
- s->n_chan = 32;
- s->maxdata = 1;
- s->range_table = &range_digital;
- s->insn_config = mpc8260cpm_dio_config;
- s->insn_bits = mpc8260cpm_dio_bits;
- }
-
- return 1;
-}
-
-static void mpc8260cpm_detach(struct comedi_device *dev)
-{
- /* Nothing to cleanup */
-}
-
-static struct comedi_driver mpc8260cpm_driver = {
- .driver_name = "mpc8260cpm",
- .module = THIS_MODULE,
- .attach = mpc8260cpm_attach,
- .detach = mpc8260cpm_detach,
-};
-module_comedi_driver(mpc8260cpm_driver);
diff --git a/drivers/staging/comedi/drivers/multiq3.c b/drivers/staging/comedi/drivers/multiq3.c
index 4625cb4..1f5f402 100644
--- a/drivers/staging/comedi/drivers/multiq3.c
+++ b/drivers/staging/comedi/drivers/multiq3.c
@@ -86,7 +86,6 @@
struct multiq3_private {
unsigned int ao_readback[2];
};
-#define devpriv ((struct multiq3_private *)dev->private)
static int multiq3_ai_insn_read(struct comedi_device *dev,
struct comedi_subdevice *s,
@@ -129,6 +128,7 @@
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
+ struct multiq3_private *devpriv = dev->private;
int i;
int chan = CR_CHAN(insn->chanspec);
@@ -142,6 +142,7 @@
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
+ struct multiq3_private *devpriv = dev->private;
int i;
int chan = CR_CHAN(insn->chanspec);
@@ -230,6 +231,7 @@
static int multiq3_attach(struct comedi_device *dev,
struct comedi_devconfig *it)
{
+ struct multiq3_private *devpriv;
int result = 0;
unsigned long iobase;
unsigned int irq;
@@ -256,9 +258,10 @@
if (result)
return result;
- result = alloc_private(dev, sizeof(struct multiq3_private));
- if (result < 0)
- return result;
+ devpriv = kzalloc(sizeof(*devpriv), GFP_KERNEL);
+ if (!devpriv)
+ return -ENOMEM;
+ dev->private = devpriv;
s = &dev->subdevices[0];
/* ai subdevice */
diff --git a/drivers/staging/comedi/drivers/ni_6527.c b/drivers/staging/comedi/drivers/ni_6527.c
index 51295f3..5196b460 100644
--- a/drivers/staging/comedi/drivers/ni_6527.c
+++ b/drivers/staging/comedi/drivers/ni_6527.c
@@ -112,12 +112,11 @@
unsigned int filter_enable;
};
-#define devpriv ((struct ni6527_private *)dev->private)
-
static int ni6527_di_insn_config(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
+ struct ni6527_private *devpriv = dev->private;
int chan = CR_CHAN(insn->chanspec);
unsigned int interval;
@@ -164,6 +163,8 @@
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
+ struct ni6527_private *devpriv = dev->private;
+
data[1] = readb(devpriv->mite->daq_io_addr + Port_Register(0));
data[1] |= readb(devpriv->mite->daq_io_addr + Port_Register(1)) << 8;
data[1] |= readb(devpriv->mite->daq_io_addr + Port_Register(2)) << 16;
@@ -175,6 +176,8 @@
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
+ struct ni6527_private *devpriv = dev->private;
+
if (data[0]) {
s->state &= ~data[0];
s->state |= (data[0] & data[1]);
@@ -202,6 +205,7 @@
static irqreturn_t ni6527_interrupt(int irq, void *d)
{
struct comedi_device *dev = d;
+ struct ni6527_private *devpriv = dev->private;
struct comedi_subdevice *s = &dev->subdevices[2];
unsigned int status;
@@ -243,29 +247,13 @@
if (err)
return 2;
- /* step 3: make sure arguments are trivially compatible */
+ /* Step 3: check if arguments are trivially valid */
- if (cmd->start_arg != 0) {
- cmd->start_arg = 0;
- err++;
- }
- if (cmd->scan_begin_arg != 0) {
- cmd->scan_begin_arg = 0;
- err++;
- }
- if (cmd->convert_arg != 0) {
- cmd->convert_arg = 0;
- err++;
- }
-
- if (cmd->scan_end_arg != 1) {
- cmd->scan_end_arg = 1;
- err++;
- }
- if (cmd->stop_arg != 0) {
- cmd->stop_arg = 0;
- err++;
- }
+ err |= cfc_check_trigger_arg_is(&cmd->start_arg, 0);
+ err |= cfc_check_trigger_arg_is(&cmd->scan_begin_arg, 0);
+ err |= cfc_check_trigger_arg_is(&cmd->convert_arg, 0);
+ err |= cfc_check_trigger_arg_is(&cmd->scan_end_arg, 1);
+ err |= cfc_check_trigger_arg_is(&cmd->stop_arg, 0);
if (err)
return 3;
@@ -281,6 +269,7 @@
static int ni6527_intr_cmd(struct comedi_device *dev,
struct comedi_subdevice *s)
{
+ struct ni6527_private *devpriv = dev->private;
/* struct comedi_cmd *cmd = &s->async->cmd; */
writeb(ClrEdge | ClrOverflow,
@@ -295,6 +284,8 @@
static int ni6527_intr_cancel(struct comedi_device *dev,
struct comedi_subdevice *s)
{
+ struct ni6527_private *devpriv = dev->private;
+
writeb(0x00, devpriv->mite->daq_io_addr + Master_Interrupt_Control);
return 0;
@@ -312,6 +303,8 @@
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
+ struct ni6527_private *devpriv = dev->private;
+
if (insn->n < 1)
return -EINVAL;
if (data[0] != INSN_CONFIG_CHANGE_NOTIFY)
@@ -348,15 +341,18 @@
return NULL;
}
-static int __devinit ni6527_attach_pci(struct comedi_device *dev,
- struct pci_dev *pcidev)
+static int ni6527_auto_attach(struct comedi_device *dev,
+ unsigned long context_unused)
{
+ struct pci_dev *pcidev = comedi_to_pci_dev(dev);
+ struct ni6527_private *devpriv;
struct comedi_subdevice *s;
int ret;
- ret = alloc_private(dev, sizeof(struct ni6527_private));
- if (ret < 0)
- return ret;
+ devpriv = kzalloc(sizeof(*devpriv), GFP_KERNEL);
+ if (!devpriv)
+ return -ENOMEM;
+ dev->private = devpriv;
dev->board_ptr = ni6527_find_boardinfo(pcidev);
if (!dev->board_ptr)
@@ -430,6 +426,8 @@
static void ni6527_detach(struct comedi_device *dev)
{
+ struct ni6527_private *devpriv = dev->private;
+
if (devpriv && devpriv->mite && devpriv->mite->daq_io_addr)
writeb(0x00,
devpriv->mite->daq_io_addr + Master_Interrupt_Control);
@@ -444,17 +442,17 @@
static struct comedi_driver ni6527_driver = {
.driver_name = DRIVER_NAME,
.module = THIS_MODULE,
- .attach_pci = ni6527_attach_pci,
+ .auto_attach = ni6527_auto_attach,
.detach = ni6527_detach,
};
-static int __devinit ni6527_pci_probe(struct pci_dev *dev,
+static int ni6527_pci_probe(struct pci_dev *dev,
const struct pci_device_id *ent)
{
return comedi_pci_auto_config(dev, &ni6527_driver);
}
-static void __devexit ni6527_pci_remove(struct pci_dev *dev)
+static void ni6527_pci_remove(struct pci_dev *dev)
{
comedi_pci_auto_unconfig(dev);
}
@@ -463,7 +461,7 @@
.name = DRIVER_NAME,
.id_table = ni6527_pci_table,
.probe = ni6527_pci_probe,
- .remove = __devexit_p(ni6527_pci_remove)
+ .remove = ni6527_pci_remove
};
module_comedi_pci_driver(ni6527_driver, ni6527_pci_driver);
diff --git a/drivers/staging/comedi/drivers/ni_65xx.c b/drivers/staging/comedi/drivers/ni_65xx.c
index 2a73ff5..2fb4b77 100644
--- a/drivers/staging/comedi/drivers/ni_65xx.c
+++ b/drivers/staging/comedi/drivers/ni_65xx.c
@@ -48,7 +48,6 @@
*/
-#define _GNU_SOURCE
#define DEBUG 1
#define DEBUG_FLAGS
#include <linux/interrupt.h>
@@ -291,11 +290,6 @@
unsigned short dio_direction[NI_65XX_MAX_NUM_PORTS];
};
-static inline struct ni_65xx_private *private(struct comedi_device *dev)
-{
- return dev->private;
-}
-
struct ni_65xx_subdevice_private {
unsigned base_port;
};
@@ -319,6 +313,7 @@
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
+ struct ni_65xx_private *devpriv = dev->private;
const unsigned chan = CR_CHAN(insn->chanspec);
const unsigned port =
sprivate(s)->base_port + ni_65xx_port_by_channel(chan);
@@ -335,22 +330,22 @@
interval = max_filter_interval;
data[1] = interval * filter_resolution_ns;
- if (interval != private(dev)->filter_interval) {
+ if (interval != devpriv->filter_interval) {
writeb(interval,
- private(dev)->mite->daq_io_addr +
+ devpriv->mite->daq_io_addr +
Filter_Interval);
- private(dev)->filter_interval = interval;
+ devpriv->filter_interval = interval;
}
- private(dev)->filter_enable[port] |=
+ devpriv->filter_enable[port] |=
1 << (chan % ni_65xx_channels_per_port);
} else {
- private(dev)->filter_enable[port] &=
+ devpriv->filter_enable[port] &=
~(1 << (chan % ni_65xx_channels_per_port));
}
- writeb(private(dev)->filter_enable[port],
- private(dev)->mite->daq_io_addr + Filter_Enable(port));
+ writeb(devpriv->filter_enable[port],
+ devpriv->mite->daq_io_addr + Filter_Enable(port));
return 2;
}
@@ -359,6 +354,7 @@
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
+ struct ni_65xx_private *devpriv = dev->private;
unsigned port;
if (insn->n < 1)
@@ -372,21 +368,21 @@
case INSN_CONFIG_DIO_OUTPUT:
if (s->type != COMEDI_SUBD_DIO)
return -EINVAL;
- private(dev)->dio_direction[port] = COMEDI_OUTPUT;
- writeb(0, private(dev)->mite->daq_io_addr + Port_Select(port));
+ devpriv->dio_direction[port] = COMEDI_OUTPUT;
+ writeb(0, devpriv->mite->daq_io_addr + Port_Select(port));
return 1;
break;
case INSN_CONFIG_DIO_INPUT:
if (s->type != COMEDI_SUBD_DIO)
return -EINVAL;
- private(dev)->dio_direction[port] = COMEDI_INPUT;
- writeb(1, private(dev)->mite->daq_io_addr + Port_Select(port));
+ devpriv->dio_direction[port] = COMEDI_INPUT;
+ writeb(1, devpriv->mite->daq_io_addr + Port_Select(port));
return 1;
break;
case INSN_CONFIG_DIO_QUERY:
if (s->type != COMEDI_SUBD_DIO)
return -EINVAL;
- data[1] = private(dev)->dio_direction[port];
+ data[1] = devpriv->dio_direction[port];
return insn->n;
break;
default:
@@ -399,6 +395,7 @@
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
+ struct ni_65xx_private *devpriv = dev->private;
unsigned base_bitfield_channel;
const unsigned max_ports_per_bitfield = 5;
unsigned read_bits = 0;
@@ -432,18 +429,18 @@
port_data &= 0xff;
if (port_mask) {
unsigned bits;
- private(dev)->output_bits[port] &= ~port_mask;
- private(dev)->output_bits[port] |=
+ devpriv->output_bits[port] &= ~port_mask;
+ devpriv->output_bits[port] |=
port_data & port_mask;
- bits = private(dev)->output_bits[port];
+ bits = devpriv->output_bits[port];
if (board(dev)->invert_outputs)
bits = ~bits;
writeb(bits,
- private(dev)->mite->daq_io_addr +
+ devpriv->mite->daq_io_addr +
Port_Data(port));
}
port_read_bits =
- readb(private(dev)->mite->daq_io_addr + Port_Data(port));
+ readb(devpriv->mite->daq_io_addr + Port_Data(port));
if (s->type == COMEDI_SUBD_DO && board(dev)->invert_outputs) {
/* Outputs inverted, so invert value read back from
* DO subdevice. (Does not apply to boards with DIO
@@ -464,17 +461,18 @@
static irqreturn_t ni_65xx_interrupt(int irq, void *d)
{
struct comedi_device *dev = d;
+ struct ni_65xx_private *devpriv = dev->private;
struct comedi_subdevice *s = &dev->subdevices[2];
unsigned int status;
- status = readb(private(dev)->mite->daq_io_addr + Change_Status);
+ status = readb(devpriv->mite->daq_io_addr + Change_Status);
if ((status & MasterInterruptStatus) == 0)
return IRQ_NONE;
if ((status & EdgeStatus) == 0)
return IRQ_NONE;
writeb(ClrEdge | ClrOverflow,
- private(dev)->mite->daq_io_addr + Clear_Register);
+ devpriv->mite->daq_io_addr + Clear_Register);
comedi_buf_put(s->async, 0);
s->async->events |= COMEDI_CB_EOS;
@@ -505,29 +503,13 @@
if (err)
return 2;
- /* step 3: make sure arguments are trivially compatible */
+ /* Step 3: check if arguments are trivially valid */
- if (cmd->start_arg != 0) {
- cmd->start_arg = 0;
- err++;
- }
- if (cmd->scan_begin_arg != 0) {
- cmd->scan_begin_arg = 0;
- err++;
- }
- if (cmd->convert_arg != 0) {
- cmd->convert_arg = 0;
- err++;
- }
-
- if (cmd->scan_end_arg != 1) {
- cmd->scan_end_arg = 1;
- err++;
- }
- if (cmd->stop_arg != 0) {
- cmd->stop_arg = 0;
- err++;
- }
+ err |= cfc_check_trigger_arg_is(&cmd->start_arg, 0);
+ err |= cfc_check_trigger_arg_is(&cmd->scan_begin_arg, 0);
+ err |= cfc_check_trigger_arg_is(&cmd->convert_arg, 0);
+ err |= cfc_check_trigger_arg_is(&cmd->scan_end_arg, 1);
+ err |= cfc_check_trigger_arg_is(&cmd->stop_arg, 0);
if (err)
return 3;
@@ -543,13 +525,14 @@
static int ni_65xx_intr_cmd(struct comedi_device *dev,
struct comedi_subdevice *s)
{
+ struct ni_65xx_private *devpriv = dev->private;
/* struct comedi_cmd *cmd = &s->async->cmd; */
writeb(ClrEdge | ClrOverflow,
- private(dev)->mite->daq_io_addr + Clear_Register);
+ devpriv->mite->daq_io_addr + Clear_Register);
writeb(FallingEdgeIntEnable | RisingEdgeIntEnable |
MasterInterruptEnable | EdgeIntEnable,
- private(dev)->mite->daq_io_addr + Master_Interrupt_Control);
+ devpriv->mite->daq_io_addr + Master_Interrupt_Control);
return 0;
}
@@ -557,8 +540,9 @@
static int ni_65xx_intr_cancel(struct comedi_device *dev,
struct comedi_subdevice *s)
{
- writeb(0x00,
- private(dev)->mite->daq_io_addr + Master_Interrupt_Control);
+ struct ni_65xx_private *devpriv = dev->private;
+
+ writeb(0x00, devpriv->mite->daq_io_addr + Master_Interrupt_Control);
return 0;
}
@@ -576,35 +560,37 @@
struct comedi_insn *insn,
unsigned int *data)
{
+ struct ni_65xx_private *devpriv = dev->private;
+
if (insn->n < 1)
return -EINVAL;
if (data[0] != INSN_CONFIG_CHANGE_NOTIFY)
return -EINVAL;
writeb(data[1],
- private(dev)->mite->daq_io_addr +
+ devpriv->mite->daq_io_addr +
Rising_Edge_Detection_Enable(0));
writeb(data[1] >> 8,
- private(dev)->mite->daq_io_addr +
+ devpriv->mite->daq_io_addr +
Rising_Edge_Detection_Enable(0x10));
writeb(data[1] >> 16,
- private(dev)->mite->daq_io_addr +
+ devpriv->mite->daq_io_addr +
Rising_Edge_Detection_Enable(0x20));
writeb(data[1] >> 24,
- private(dev)->mite->daq_io_addr +
+ devpriv->mite->daq_io_addr +
Rising_Edge_Detection_Enable(0x30));
writeb(data[2],
- private(dev)->mite->daq_io_addr +
+ devpriv->mite->daq_io_addr +
Falling_Edge_Detection_Enable(0));
writeb(data[2] >> 8,
- private(dev)->mite->daq_io_addr +
+ devpriv->mite->daq_io_addr +
Falling_Edge_Detection_Enable(0x10));
writeb(data[2] >> 16,
- private(dev)->mite->daq_io_addr +
+ devpriv->mite->daq_io_addr +
Falling_Edge_Detection_Enable(0x20));
writeb(data[2] >> 24,
- private(dev)->mite->daq_io_addr +
+ devpriv->mite->daq_io_addr +
Falling_Edge_Detection_Enable(0x30));
return 2;
@@ -624,35 +610,38 @@
return NULL;
}
-static int __devinit ni_65xx_attach_pci(struct comedi_device *dev,
- struct pci_dev *pcidev)
+static int ni_65xx_auto_attach(struct comedi_device *dev,
+ unsigned long context_unused)
{
+ struct pci_dev *pcidev = comedi_to_pci_dev(dev);
+ struct ni_65xx_private *devpriv;
struct comedi_subdevice *s;
unsigned i;
int ret;
- ret = alloc_private(dev, sizeof(struct ni_65xx_private));
- if (ret < 0)
- return ret;
+ devpriv = kzalloc(sizeof(*devpriv), GFP_KERNEL);
+ if (!devpriv)
+ return -ENOMEM;
+ dev->private = devpriv;
dev->board_ptr = ni_65xx_find_boardinfo(pcidev);
if (!dev->board_ptr)
return -ENODEV;
- private(dev)->mite = mite_alloc(pcidev);
- if (!private(dev)->mite)
+ devpriv->mite = mite_alloc(pcidev);
+ if (!devpriv->mite)
return -ENOMEM;
- ret = mite_setup(private(dev)->mite);
+ ret = mite_setup(devpriv->mite);
if (ret < 0) {
dev_warn(dev->class_dev, "error setting up mite\n");
return ret;
}
dev->board_name = board(dev)->name;
- dev->irq = mite_irq(private(dev)->mite);
+ dev->irq = mite_irq(devpriv->mite);
dev_info(dev->class_dev, "board: %s, ID=0x%02x", dev->board_name,
- readb(private(dev)->mite->daq_io_addr + ID_Register));
+ readb(devpriv->mite->daq_io_addr + ID_Register));
ret = comedi_alloc_subdevices(dev, 4);
if (ret)
@@ -710,7 +699,7 @@
for (i = 0; i < board(dev)->num_dio_ports; ++i) {
/* configure all ports for input */
writeb(0x1,
- private(dev)->mite->daq_io_addr +
+ devpriv->mite->daq_io_addr +
Port_Select(i));
}
} else {
@@ -732,21 +721,21 @@
for (i = 0; i < ni_65xx_total_num_ports(board(dev)); ++i) {
writeb(0x00,
- private(dev)->mite->daq_io_addr + Filter_Enable(i));
+ devpriv->mite->daq_io_addr + Filter_Enable(i));
if (board(dev)->invert_outputs)
writeb(0x01,
- private(dev)->mite->daq_io_addr + Port_Data(i));
+ devpriv->mite->daq_io_addr + Port_Data(i));
else
writeb(0x00,
- private(dev)->mite->daq_io_addr + Port_Data(i));
+ devpriv->mite->daq_io_addr + Port_Data(i));
}
writeb(ClrEdge | ClrOverflow,
- private(dev)->mite->daq_io_addr + Clear_Register);
+ devpriv->mite->daq_io_addr + Clear_Register);
writeb(0x00,
- private(dev)->mite->daq_io_addr + Master_Interrupt_Control);
+ devpriv->mite->daq_io_addr + Master_Interrupt_Control);
/* Set filter interval to 0 (32bit reg) */
- writeb(0x00000000, private(dev)->mite->daq_io_addr + Filter_Interval);
+ writeb(0x00000000, devpriv->mite->daq_io_addr + Filter_Interval);
ret = request_irq(dev->irq, ni_65xx_interrupt, IRQF_SHARED,
"ni_65xx", dev);
@@ -760,15 +749,16 @@
static void ni_65xx_detach(struct comedi_device *dev)
{
- if (private(dev) && private(dev)->mite
- && private(dev)->mite->daq_io_addr) {
+ struct ni_65xx_private *devpriv = dev->private;
+
+ if (devpriv && devpriv->mite && devpriv->mite->daq_io_addr) {
writeb(0x00,
- private(dev)->mite->daq_io_addr +
+ devpriv->mite->daq_io_addr +
Master_Interrupt_Control);
}
if (dev->irq)
free_irq(dev->irq, dev);
- if (private(dev)) {
+ if (devpriv) {
struct comedi_subdevice *s;
unsigned i;
@@ -777,9 +767,9 @@
kfree(s->private);
s->private = NULL;
}
- if (private(dev)->mite) {
- mite_unsetup(private(dev)->mite);
- mite_free(private(dev)->mite);
+ if (devpriv->mite) {
+ mite_unsetup(devpriv->mite);
+ mite_free(devpriv->mite);
}
}
}
@@ -787,17 +777,17 @@
static struct comedi_driver ni_65xx_driver = {
.driver_name = "ni_65xx",
.module = THIS_MODULE,
- .attach_pci = ni_65xx_attach_pci,
+ .auto_attach = ni_65xx_auto_attach,
.detach = ni_65xx_detach,
};
-static int __devinit ni_65xx_pci_probe(struct pci_dev *dev,
+static int ni_65xx_pci_probe(struct pci_dev *dev,
const struct pci_device_id *ent)
{
return comedi_pci_auto_config(dev, &ni_65xx_driver);
}
-static void __devexit ni_65xx_pci_remove(struct pci_dev *dev)
+static void ni_65xx_pci_remove(struct pci_dev *dev)
{
comedi_pci_auto_unconfig(dev);
}
@@ -806,7 +796,7 @@
.name = "ni_65xx",
.id_table = ni_65xx_pci_table,
.probe = ni_65xx_pci_probe,
- .remove = __devexit_p(ni_65xx_pci_remove)
+ .remove = ni_65xx_pci_remove
};
module_comedi_pci_driver(ni_65xx_driver, ni_65xx_pci_driver);
diff --git a/drivers/staging/comedi/drivers/ni_660x.c b/drivers/staging/comedi/drivers/ni_660x.c
index df2f3b0..26baf9c 100644
--- a/drivers/staging/comedi/drivers/ni_660x.c
+++ b/drivers/staging/comedi/drivers/ni_660x.c
@@ -419,16 +419,6 @@
#define NI_660X_MAX_NUM_CHIPS 2
#define NI_660X_MAX_NUM_COUNTERS (NI_660X_MAX_NUM_CHIPS * counters_per_chip)
-static DEFINE_PCI_DEVICE_TABLE(ni_660x_pci_table) = {
- {PCI_DEVICE(PCI_VENDOR_ID_NI, 0x2c60)},
- {PCI_DEVICE(PCI_VENDOR_ID_NI, 0x1310)},
- {PCI_DEVICE(PCI_VENDOR_ID_NI, 0x1360)},
- {PCI_DEVICE(PCI_VENDOR_ID_NI, 0x2cc0)},
- {0}
-};
-
-MODULE_DEVICE_TABLE(pci, ni_660x_pci_table);
-
struct ni_660x_private {
struct mite_struct *mite;
struct ni_gpct_device *counter_dev;
@@ -443,78 +433,11 @@
unsigned short pfi_output_selects[NUM_PFI_CHANNELS];
};
-static inline struct ni_660x_private *private(struct comedi_device *dev)
-{
- return dev->private;
-}
-
-/* initialized in ni_660x_attach_pci() */
-static inline const struct ni_660x_board *board(struct comedi_device *dev)
-{
- return dev->board_ptr;
-}
-
-static int ni_660x_attach_pci(struct comedi_device *dev,
- struct pci_dev *pcidev);
-static void ni_660x_detach(struct comedi_device *dev);
-static void init_tio_chip(struct comedi_device *dev, int chipset);
-static void ni_660x_select_pfi_output(struct comedi_device *dev,
- unsigned pfi_channel,
- unsigned output_select);
-
-static struct comedi_driver ni_660x_driver = {
- .driver_name = "ni_660x",
- .module = THIS_MODULE,
- .attach_pci = ni_660x_attach_pci,
- .detach = ni_660x_detach,
-};
-
-static int __devinit ni_660x_pci_probe(struct pci_dev *dev,
- const struct pci_device_id *ent)
-{
- return comedi_pci_auto_config(dev, &ni_660x_driver);
-}
-
-static void __devexit ni_660x_pci_remove(struct pci_dev *dev)
-{
- comedi_pci_auto_unconfig(dev);
-}
-
-static struct pci_driver ni_660x_pci_driver = {
- .name = "ni_660x",
- .id_table = ni_660x_pci_table,
- .probe = ni_660x_pci_probe,
- .remove = __devexit_p(ni_660x_pci_remove)
-};
-module_comedi_pci_driver(ni_660x_driver, ni_660x_pci_driver);
-
-static int ni_660x_set_pfi_routing(struct comedi_device *dev, unsigned chan,
- unsigned source);
-
-/* Possible instructions for a GPCT */
-static int ni_660x_GPCT_rinsn(struct comedi_device *dev,
- struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-static int ni_660x_GPCT_insn_config(struct comedi_device *dev,
- struct comedi_subdevice *s,
- struct comedi_insn *insn,
- unsigned int *data);
-static int ni_660x_GPCT_winsn(struct comedi_device *dev,
- struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-
-/* Possible instructions for Digital IO */
-static int ni_660x_dio_insn_config(struct comedi_device *dev,
- struct comedi_subdevice *s,
- struct comedi_insn *insn,
- unsigned int *data);
-static int ni_660x_dio_insn_bits(struct comedi_device *dev,
- struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-
static inline unsigned ni_660x_num_counters(struct comedi_device *dev)
{
- return board(dev)->n_chips * counters_per_chip;
+ const struct ni_660x_board *board = comedi_board(dev);
+
+ return board->n_chips * counters_per_chip;
}
static enum NI_660x_Register ni_gpct_to_660x_register(enum ni_gpct_register reg)
@@ -737,8 +660,9 @@
unsigned chip_index, unsigned bits,
enum NI_660x_Register reg)
{
+ struct ni_660x_private *devpriv = dev->private;
void __iomem *write_address =
- private(dev)->mite->daq_io_addr + GPCT_OFFSET[chip_index] +
+ devpriv->mite->daq_io_addr + GPCT_OFFSET[chip_index] +
registerData[reg].offset;
switch (registerData[reg].size) {
@@ -758,8 +682,9 @@
unsigned chip_index,
enum NI_660x_Register reg)
{
+ struct ni_660x_private *devpriv = dev->private;
void __iomem *read_address =
- private(dev)->mite->daq_io_addr + GPCT_OFFSET[chip_index] +
+ devpriv->mite->daq_io_addr + GPCT_OFFSET[chip_index] +
registerData[reg].offset;
switch (registerData[reg].size) {
@@ -806,54 +731,56 @@
unsigned mite_channel,
struct ni_gpct *counter)
{
+ struct ni_660x_private *devpriv = dev->private;
unsigned long flags;
- spin_lock_irqsave(&private(dev)->soft_reg_copy_lock, flags);
- private(dev)->dma_configuration_soft_copies[counter->chip_index] &=
+
+ spin_lock_irqsave(&devpriv->soft_reg_copy_lock, flags);
+ devpriv->dma_configuration_soft_copies[counter->chip_index] &=
~dma_select_mask(mite_channel);
- private(dev)->dma_configuration_soft_copies[counter->chip_index] |=
+ devpriv->dma_configuration_soft_copies[counter->chip_index] |=
dma_select_bits(mite_channel,
dma_selection_counter(counter->counter_index));
ni_660x_write_register(dev, counter->chip_index,
- private(dev)->
- dma_configuration_soft_copies
+ devpriv->dma_configuration_soft_copies
[counter->chip_index] |
dma_reset_bit(mite_channel), DMAConfigRegister);
mmiowb();
- spin_unlock_irqrestore(&private(dev)->soft_reg_copy_lock, flags);
+ spin_unlock_irqrestore(&devpriv->soft_reg_copy_lock, flags);
}
static inline void ni_660x_unset_dma_channel(struct comedi_device *dev,
unsigned mite_channel,
struct ni_gpct *counter)
{
+ struct ni_660x_private *devpriv = dev->private;
unsigned long flags;
- spin_lock_irqsave(&private(dev)->soft_reg_copy_lock, flags);
- private(dev)->dma_configuration_soft_copies[counter->chip_index] &=
+
+ spin_lock_irqsave(&devpriv->soft_reg_copy_lock, flags);
+ devpriv->dma_configuration_soft_copies[counter->chip_index] &=
~dma_select_mask(mite_channel);
- private(dev)->dma_configuration_soft_copies[counter->chip_index] |=
+ devpriv->dma_configuration_soft_copies[counter->chip_index] |=
dma_select_bits(mite_channel, dma_selection_none);
ni_660x_write_register(dev, counter->chip_index,
- private(dev)->
- dma_configuration_soft_copies
+ devpriv->dma_configuration_soft_copies
[counter->chip_index], DMAConfigRegister);
mmiowb();
- spin_unlock_irqrestore(&private(dev)->soft_reg_copy_lock, flags);
+ spin_unlock_irqrestore(&devpriv->soft_reg_copy_lock, flags);
}
static int ni_660x_request_mite_channel(struct comedi_device *dev,
struct ni_gpct *counter,
enum comedi_io_direction direction)
{
+ struct ni_660x_private *devpriv = dev->private;
unsigned long flags;
struct mite_channel *mite_chan;
- spin_lock_irqsave(&private(dev)->mite_channel_lock, flags);
+ spin_lock_irqsave(&devpriv->mite_channel_lock, flags);
BUG_ON(counter->mite_chan);
- mite_chan =
- mite_request_channel(private(dev)->mite, mite_ring(private(dev),
- counter));
+ mite_chan = mite_request_channel(devpriv->mite,
+ mite_ring(devpriv, counter));
if (mite_chan == NULL) {
- spin_unlock_irqrestore(&private(dev)->mite_channel_lock, flags);
+ spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags);
comedi_error(dev,
"failed to reserve mite dma channel for counter.");
return -EBUSY;
@@ -861,16 +788,17 @@
mite_chan->dir = direction;
ni_tio_set_mite_channel(counter, mite_chan);
ni_660x_set_dma_channel(dev, mite_chan->channel, counter);
- spin_unlock_irqrestore(&private(dev)->mite_channel_lock, flags);
+ spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags);
return 0;
}
static void ni_660x_release_mite_channel(struct comedi_device *dev,
struct ni_gpct *counter)
{
+ struct ni_660x_private *devpriv = dev->private;
unsigned long flags;
- spin_lock_irqsave(&private(dev)->mite_channel_lock, flags);
+ spin_lock_irqsave(&devpriv->mite_channel_lock, flags);
if (counter->mite_chan) {
struct mite_channel *mite_chan = counter->mite_chan;
@@ -878,7 +806,7 @@
ni_tio_set_mite_channel(counter, NULL);
mite_release_channel(mite_chan);
}
- spin_unlock_irqrestore(&private(dev)->mite_channel_lock, flags);
+ spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags);
}
static int ni_660x_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
@@ -947,6 +875,7 @@
static irqreturn_t ni_660x_interrupt(int irq, void *d)
{
struct comedi_device *dev = d;
+ struct ni_660x_private *devpriv = dev->private;
struct comedi_subdevice *s;
unsigned i;
unsigned long flags;
@@ -954,24 +883,26 @@
if (dev->attached == 0)
return IRQ_NONE;
/* lock to avoid race with comedi_poll */
- spin_lock_irqsave(&private(dev)->interrupt_lock, flags);
+ spin_lock_irqsave(&devpriv->interrupt_lock, flags);
smp_mb();
for (i = 0; i < ni_660x_num_counters(dev); ++i) {
s = &dev->subdevices[NI_660X_GPCT_SUBDEV(i)];
ni_660x_handle_gpct_interrupt(dev, s);
}
- spin_unlock_irqrestore(&private(dev)->interrupt_lock, flags);
+ spin_unlock_irqrestore(&devpriv->interrupt_lock, flags);
return IRQ_HANDLED;
}
static int ni_660x_input_poll(struct comedi_device *dev,
struct comedi_subdevice *s)
{
+ struct ni_660x_private *devpriv = dev->private;
unsigned long flags;
+
/* lock to avoid race with comedi_poll */
- spin_lock_irqsave(&private(dev)->interrupt_lock, flags);
+ spin_lock_irqsave(&devpriv->interrupt_lock, flags);
mite_sync_input_dma(subdev_to_counter(s)->mite_chan, s->async);
- spin_unlock_irqrestore(&private(dev)->interrupt_lock, flags);
+ spin_unlock_irqrestore(&devpriv->interrupt_lock, flags);
return comedi_buf_read_n_available(s->async);
}
@@ -979,9 +910,10 @@
struct comedi_subdevice *s,
unsigned long new_size)
{
+ struct ni_660x_private *devpriv = dev->private;
int ret;
- ret = mite_buf_change(mite_ring(private(dev), subdev_to_counter(s)),
+ ret = mite_buf_change(mite_ring(devpriv, subdev_to_counter(s)),
s->async);
if (ret < 0)
return ret;
@@ -991,32 +923,35 @@
static int ni_660x_allocate_private(struct comedi_device *dev)
{
- int retval;
+ struct ni_660x_private *devpriv;
unsigned i;
- retval = alloc_private(dev, sizeof(struct ni_660x_private));
- if (retval < 0)
- return retval;
+ devpriv = kzalloc(sizeof(*devpriv), GFP_KERNEL);
+ if (!devpriv)
+ return -ENOMEM;
+ dev->private = devpriv;
- spin_lock_init(&private(dev)->mite_channel_lock);
- spin_lock_init(&private(dev)->interrupt_lock);
- spin_lock_init(&private(dev)->soft_reg_copy_lock);
+ spin_lock_init(&devpriv->mite_channel_lock);
+ spin_lock_init(&devpriv->interrupt_lock);
+ spin_lock_init(&devpriv->soft_reg_copy_lock);
for (i = 0; i < NUM_PFI_CHANNELS; ++i)
- private(dev)->pfi_output_selects[i] = pfi_output_select_counter;
+ devpriv->pfi_output_selects[i] = pfi_output_select_counter;
return 0;
}
static int ni_660x_alloc_mite_rings(struct comedi_device *dev)
{
+ const struct ni_660x_board *board = comedi_board(dev);
+ struct ni_660x_private *devpriv = dev->private;
unsigned i;
unsigned j;
- for (i = 0; i < board(dev)->n_chips; ++i) {
+ for (i = 0; i < board->n_chips; ++i) {
for (j = 0; j < counters_per_chip; ++j) {
- private(dev)->mite_rings[i][j] =
- mite_alloc_ring(private(dev)->mite);
- if (private(dev)->mite_rings[i][j] == NULL)
+ devpriv->mite_rings[i][j] =
+ mite_alloc_ring(devpriv->mite);
+ if (devpriv->mite_rings[i][j] == NULL)
return -ENOMEM;
}
}
@@ -1025,12 +960,14 @@
static void ni_660x_free_mite_rings(struct comedi_device *dev)
{
+ const struct ni_660x_board *board = comedi_board(dev);
+ struct ni_660x_private *devpriv = dev->private;
unsigned i;
unsigned j;
- for (i = 0; i < board(dev)->n_chips; ++i) {
+ for (i = 0; i < board->n_chips; ++i) {
for (j = 0; j < counters_per_chip; ++j)
- mite_free_ring(private(dev)->mite_rings[i][j]);
+ mite_free_ring(devpriv->mite_rings[i][j]);
}
}
@@ -1048,145 +985,6 @@
return NULL;
}
-static int __devinit ni_660x_attach_pci(struct comedi_device *dev,
- struct pci_dev *pcidev)
-{
- struct comedi_subdevice *s;
- int ret;
- unsigned i;
- unsigned global_interrupt_config_bits;
-
- ret = ni_660x_allocate_private(dev);
- if (ret < 0)
- return ret;
- dev->board_ptr = ni_660x_find_boardinfo(pcidev);
- if (!dev->board_ptr)
- return -ENODEV;
- private(dev)->mite = mite_alloc(pcidev);
- if (!private(dev)->mite)
- return -ENOMEM;
-
- dev->board_name = board(dev)->name;
-
- ret = mite_setup2(private(dev)->mite, 1);
- if (ret < 0) {
- dev_warn(dev->class_dev, "error setting up mite\n");
- return ret;
- }
- comedi_set_hw_dev(dev, &private(dev)->mite->pcidev->dev);
- ret = ni_660x_alloc_mite_rings(dev);
- if (ret < 0)
- return ret;
-
- ret = comedi_alloc_subdevices(dev, 2 + NI_660X_MAX_NUM_COUNTERS);
- if (ret)
- return ret;
-
- s = &dev->subdevices[0];
- /* Old GENERAL-PURPOSE COUNTER/TIME (GPCT) subdevice, no longer used */
- s->type = COMEDI_SUBD_UNUSED;
-
- s = &dev->subdevices[NI_660X_DIO_SUBDEV];
- /* DIGITAL I/O SUBDEVICE */
- s->type = COMEDI_SUBD_DIO;
- s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
- s->n_chan = NUM_PFI_CHANNELS;
- s->maxdata = 1;
- s->range_table = &range_digital;
- s->insn_bits = ni_660x_dio_insn_bits;
- s->insn_config = ni_660x_dio_insn_config;
- s->io_bits = 0; /* all bits default to input */
- /* we use the ioconfig registers to control dio direction, so zero
- output enables in stc dio control reg */
- ni_660x_write_register(dev, 0, 0, STCDIOControl);
-
- private(dev)->counter_dev = ni_gpct_device_construct(dev,
- &ni_gpct_write_register,
- &ni_gpct_read_register,
- ni_gpct_variant_660x,
- ni_660x_num_counters
- (dev));
- if (private(dev)->counter_dev == NULL)
- return -ENOMEM;
- for (i = 0; i < NI_660X_MAX_NUM_COUNTERS; ++i) {
- s = &dev->subdevices[NI_660X_GPCT_SUBDEV(i)];
- if (i < ni_660x_num_counters(dev)) {
- s->type = COMEDI_SUBD_COUNTER;
- s->subdev_flags =
- SDF_READABLE | SDF_WRITABLE | SDF_LSAMPL |
- SDF_CMD_READ /* | SDF_CMD_WRITE */ ;
- s->n_chan = 3;
- s->maxdata = 0xffffffff;
- s->insn_read = ni_660x_GPCT_rinsn;
- s->insn_write = ni_660x_GPCT_winsn;
- s->insn_config = ni_660x_GPCT_insn_config;
- s->do_cmd = &ni_660x_cmd;
- s->len_chanlist = 1;
- s->do_cmdtest = &ni_660x_cmdtest;
- s->cancel = &ni_660x_cancel;
- s->poll = &ni_660x_input_poll;
- s->async_dma_dir = DMA_BIDIRECTIONAL;
- s->buf_change = &ni_660x_buf_change;
- s->private = &private(dev)->counter_dev->counters[i];
-
- private(dev)->counter_dev->counters[i].chip_index =
- i / counters_per_chip;
- private(dev)->counter_dev->counters[i].counter_index =
- i % counters_per_chip;
- } else {
- s->type = COMEDI_SUBD_UNUSED;
- }
- }
- for (i = 0; i < board(dev)->n_chips; ++i)
- init_tio_chip(dev, i);
-
- for (i = 0; i < ni_660x_num_counters(dev); ++i)
- ni_tio_init_counter(&private(dev)->counter_dev->counters[i]);
-
- for (i = 0; i < NUM_PFI_CHANNELS; ++i) {
- if (i < min_counter_pfi_chan)
- ni_660x_set_pfi_routing(dev, i, pfi_output_select_do);
- else
- ni_660x_set_pfi_routing(dev, i,
- pfi_output_select_counter);
- ni_660x_select_pfi_output(dev, i, pfi_output_select_high_Z);
- }
- /* to be safe, set counterswap bits on tio chips after all the counter
- outputs have been set to high impedance mode */
- for (i = 0; i < board(dev)->n_chips; ++i)
- set_tio_counterswap(dev, i);
-
- ret = request_irq(mite_irq(private(dev)->mite), ni_660x_interrupt,
- IRQF_SHARED, "ni_660x", dev);
- if (ret < 0) {
- dev_warn(dev->class_dev, " irq not available\n");
- return ret;
- }
- dev->irq = mite_irq(private(dev)->mite);
- global_interrupt_config_bits = Global_Int_Enable_Bit;
- if (board(dev)->n_chips > 1)
- global_interrupt_config_bits |= Cascade_Int_Enable_Bit;
- ni_660x_write_register(dev, 0, global_interrupt_config_bits,
- GlobalInterruptConfigRegister);
- dev_info(dev->class_dev, "ni_660x: %s attached\n", dev->board_name);
- return 0;
-}
-
-static void ni_660x_detach(struct comedi_device *dev)
-{
- if (dev->irq)
- free_irq(dev->irq, dev);
- if (dev->private) {
- if (private(dev)->counter_dev)
- ni_gpct_device_destroy(private(dev)->counter_dev);
- if (private(dev)->mite) {
- ni_660x_free_mite_rings(dev);
- mite_unsetup(private(dev)->mite);
- mite_free(private(dev)->mite);
- }
- }
-}
-
static int
ni_660x_GPCT_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
@@ -1196,17 +994,17 @@
static void init_tio_chip(struct comedi_device *dev, int chipset)
{
+ struct ni_660x_private *devpriv = dev->private;
unsigned i;
/* init dma configuration register */
- private(dev)->dma_configuration_soft_copies[chipset] = 0;
+ devpriv->dma_configuration_soft_copies[chipset] = 0;
for (i = 0; i < MAX_DMA_CHANNEL; ++i) {
- private(dev)->dma_configuration_soft_copies[chipset] |=
+ devpriv->dma_configuration_soft_copies[chipset] |=
dma_select_bits(i, dma_selection_none) & dma_select_mask(i);
}
ni_660x_write_register(dev, chipset,
- private(dev)->
- dma_configuration_soft_copies[chipset],
+ devpriv->dma_configuration_soft_copies[chipset],
DMAConfigRegister);
for (i = 0; i < NUM_PFI_CHANNELS; ++i)
ni_660x_write_register(dev, chipset, 0, IOConfigReg(i));
@@ -1251,6 +1049,7 @@
unsigned pfi_channel,
unsigned output_select)
{
+ const struct ni_660x_board *board = comedi_board(dev);
static const unsigned counter_4_7_first_pfi = 8;
static const unsigned counter_4_7_last_pfi = 23;
unsigned active_chipset = 0;
@@ -1258,7 +1057,7 @@
unsigned active_bits;
unsigned idle_bits;
- if (board(dev)->n_chips > 1) {
+ if (board->n_chips > 1) {
if (output_select == pfi_output_select_counter &&
pfi_channel >= counter_4_7_first_pfi &&
pfi_channel <= counter_4_7_last_pfi) {
@@ -1294,6 +1093,8 @@
static int ni_660x_set_pfi_routing(struct comedi_device *dev, unsigned chan,
unsigned source)
{
+ struct ni_660x_private *devpriv = dev->private;
+
if (source > num_pfi_output_selects)
return -EINVAL;
if (source == pfi_output_select_high_Z)
@@ -1305,76 +1106,249 @@
if (source == pfi_output_select_do)
return -EINVAL;
}
- BUG_ON(chan >= NUM_PFI_CHANNELS);
- private(dev)->pfi_output_selects[chan] = source;
- if (private(dev)->pfi_direction_bits & (((uint64_t) 1) << chan))
+ devpriv->pfi_output_selects[chan] = source;
+ if (devpriv->pfi_direction_bits & (((uint64_t) 1) << chan))
ni_660x_select_pfi_output(dev, chan,
- private(dev)->
- pfi_output_selects[chan]);
+ devpriv->pfi_output_selects[chan]);
return 0;
}
-static unsigned ni_660x_get_pfi_routing(struct comedi_device *dev,
- unsigned chan)
-{
- BUG_ON(chan >= NUM_PFI_CHANNELS);
- return private(dev)->pfi_output_selects[chan];
-}
-
-static void ni660x_config_filter(struct comedi_device *dev,
- unsigned pfi_channel,
- enum ni_gpct_filter_select filter)
-{
- unsigned bits = ni_660x_read_register(dev, 0, IOConfigReg(pfi_channel));
- bits &= ~pfi_input_select_mask(pfi_channel);
- bits |= pfi_input_select_bits(pfi_channel, filter);
- ni_660x_write_register(dev, 0, bits, IOConfigReg(pfi_channel));
-}
-
static int ni_660x_dio_insn_config(struct comedi_device *dev,
struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data)
+ struct comedi_insn *insn,
+ unsigned int *data)
{
- int chan = CR_CHAN(insn->chanspec);
-
- /* The input or output configuration of each digital line is
- * configured by a special insn_config instruction. chanspec
- * contains the channel to be changed, and data[0] contains the
- * value COMEDI_INPUT or COMEDI_OUTPUT. */
+ struct ni_660x_private *devpriv = dev->private;
+ unsigned int chan = CR_CHAN(insn->chanspec);
+ uint64_t bit = 1ULL << chan;
+ unsigned int val;
+ int ret;
switch (data[0]) {
case INSN_CONFIG_DIO_OUTPUT:
- private(dev)->pfi_direction_bits |= ((uint64_t) 1) << chan;
+ devpriv->pfi_direction_bits |= bit;
ni_660x_select_pfi_output(dev, chan,
- private(dev)->
- pfi_output_selects[chan]);
+ devpriv->pfi_output_selects[chan]);
break;
+
case INSN_CONFIG_DIO_INPUT:
- private(dev)->pfi_direction_bits &= ~(((uint64_t) 1) << chan);
+ devpriv->pfi_direction_bits &= ~bit;
ni_660x_select_pfi_output(dev, chan, pfi_output_select_high_Z);
break;
+
case INSN_CONFIG_DIO_QUERY:
- data[1] =
- (private(dev)->pfi_direction_bits &
- (((uint64_t) 1) << chan)) ? COMEDI_OUTPUT : COMEDI_INPUT;
- return 0;
+ data[1] = (devpriv->pfi_direction_bits & bit) ? COMEDI_OUTPUT
+ : COMEDI_INPUT;
+ break;
+
case INSN_CONFIG_SET_ROUTING:
- return ni_660x_set_pfi_routing(dev, chan, data[1]);
+ ret = ni_660x_set_pfi_routing(dev, chan, data[1]);
+ if (ret)
+ return ret;
break;
+
case INSN_CONFIG_GET_ROUTING:
- data[1] = ni_660x_get_pfi_routing(dev, chan);
+ data[1] = devpriv->pfi_output_selects[chan];
break;
+
case INSN_CONFIG_FILTER:
- ni660x_config_filter(dev, chan, data[1]);
+ val = ni_660x_read_register(dev, 0, IOConfigReg(chan));
+ val &= ~pfi_input_select_mask(chan);
+ val |= pfi_input_select_bits(chan, data[1]);
+ ni_660x_write_register(dev, 0, val, IOConfigReg(chan));
break;
+
default:
return -EINVAL;
- break;
}
+
+ return insn->n;
+}
+
+static int ni_660x_auto_attach(struct comedi_device *dev,
+ unsigned long context_unused)
+{
+ struct pci_dev *pcidev = comedi_to_pci_dev(dev);
+ const struct ni_660x_board *board;
+ struct ni_660x_private *devpriv;
+ struct comedi_subdevice *s;
+ int ret;
+ unsigned i;
+ unsigned global_interrupt_config_bits;
+
+ ret = ni_660x_allocate_private(dev);
+ if (ret < 0)
+ return ret;
+ devpriv = dev->private;
+
+ dev->board_ptr = ni_660x_find_boardinfo(pcidev);
+ if (!dev->board_ptr)
+ return -ENODEV;
+ board = comedi_board(dev);
+
+ devpriv->mite = mite_alloc(pcidev);
+ if (!devpriv->mite)
+ return -ENOMEM;
+
+ dev->board_name = board->name;
+
+ ret = mite_setup2(devpriv->mite, 1);
+ if (ret < 0) {
+ dev_warn(dev->class_dev, "error setting up mite\n");
+ return ret;
+ }
+
+ ret = ni_660x_alloc_mite_rings(dev);
+ if (ret < 0)
+ return ret;
+
+ ret = comedi_alloc_subdevices(dev, 2 + NI_660X_MAX_NUM_COUNTERS);
+ if (ret)
+ return ret;
+
+ s = &dev->subdevices[0];
+ /* Old GENERAL-PURPOSE COUNTER/TIME (GPCT) subdevice, no longer used */
+ s->type = COMEDI_SUBD_UNUSED;
+
+ s = &dev->subdevices[NI_660X_DIO_SUBDEV];
+ /* DIGITAL I/O SUBDEVICE */
+ s->type = COMEDI_SUBD_DIO;
+ s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
+ s->n_chan = NUM_PFI_CHANNELS;
+ s->maxdata = 1;
+ s->range_table = &range_digital;
+ s->insn_bits = ni_660x_dio_insn_bits;
+ s->insn_config = ni_660x_dio_insn_config;
+ s->io_bits = 0; /* all bits default to input */
+ /* we use the ioconfig registers to control dio direction, so zero
+ output enables in stc dio control reg */
+ ni_660x_write_register(dev, 0, 0, STCDIOControl);
+
+ devpriv->counter_dev = ni_gpct_device_construct(dev,
+ &ni_gpct_write_register,
+ &ni_gpct_read_register,
+ ni_gpct_variant_660x,
+ ni_660x_num_counters
+ (dev));
+ if (devpriv->counter_dev == NULL)
+ return -ENOMEM;
+ for (i = 0; i < NI_660X_MAX_NUM_COUNTERS; ++i) {
+ s = &dev->subdevices[NI_660X_GPCT_SUBDEV(i)];
+ if (i < ni_660x_num_counters(dev)) {
+ s->type = COMEDI_SUBD_COUNTER;
+ s->subdev_flags =
+ SDF_READABLE | SDF_WRITABLE | SDF_LSAMPL |
+ SDF_CMD_READ /* | SDF_CMD_WRITE */ ;
+ s->n_chan = 3;
+ s->maxdata = 0xffffffff;
+ s->insn_read = ni_660x_GPCT_rinsn;
+ s->insn_write = ni_660x_GPCT_winsn;
+ s->insn_config = ni_660x_GPCT_insn_config;
+ s->do_cmd = &ni_660x_cmd;
+ s->len_chanlist = 1;
+ s->do_cmdtest = &ni_660x_cmdtest;
+ s->cancel = &ni_660x_cancel;
+ s->poll = &ni_660x_input_poll;
+ s->async_dma_dir = DMA_BIDIRECTIONAL;
+ s->buf_change = &ni_660x_buf_change;
+ s->private = &devpriv->counter_dev->counters[i];
+
+ devpriv->counter_dev->counters[i].chip_index =
+ i / counters_per_chip;
+ devpriv->counter_dev->counters[i].counter_index =
+ i % counters_per_chip;
+ } else {
+ s->type = COMEDI_SUBD_UNUSED;
+ }
+ }
+ for (i = 0; i < board->n_chips; ++i)
+ init_tio_chip(dev, i);
+
+ for (i = 0; i < ni_660x_num_counters(dev); ++i)
+ ni_tio_init_counter(&devpriv->counter_dev->counters[i]);
+
+ for (i = 0; i < NUM_PFI_CHANNELS; ++i) {
+ if (i < min_counter_pfi_chan)
+ ni_660x_set_pfi_routing(dev, i, pfi_output_select_do);
+ else
+ ni_660x_set_pfi_routing(dev, i,
+ pfi_output_select_counter);
+ ni_660x_select_pfi_output(dev, i, pfi_output_select_high_Z);
+ }
+ /* to be safe, set counterswap bits on tio chips after all the counter
+ outputs have been set to high impedance mode */
+ for (i = 0; i < board->n_chips; ++i)
+ set_tio_counterswap(dev, i);
+
+ ret = request_irq(mite_irq(devpriv->mite), ni_660x_interrupt,
+ IRQF_SHARED, "ni_660x", dev);
+ if (ret < 0) {
+ dev_warn(dev->class_dev, " irq not available\n");
+ return ret;
+ }
+ dev->irq = mite_irq(devpriv->mite);
+ global_interrupt_config_bits = Global_Int_Enable_Bit;
+ if (board->n_chips > 1)
+ global_interrupt_config_bits |= Cascade_Int_Enable_Bit;
+ ni_660x_write_register(dev, 0, global_interrupt_config_bits,
+ GlobalInterruptConfigRegister);
+ dev_info(dev->class_dev, "ni_660x: %s attached\n", dev->board_name);
return 0;
}
+static void ni_660x_detach(struct comedi_device *dev)
+{
+ struct ni_660x_private *devpriv = dev->private;
+
+ if (dev->irq)
+ free_irq(dev->irq, dev);
+ if (devpriv) {
+ if (devpriv->counter_dev)
+ ni_gpct_device_destroy(devpriv->counter_dev);
+ if (devpriv->mite) {
+ ni_660x_free_mite_rings(dev);
+ mite_unsetup(devpriv->mite);
+ mite_free(devpriv->mite);
+ }
+ }
+}
+
+static struct comedi_driver ni_660x_driver = {
+ .driver_name = "ni_660x",
+ .module = THIS_MODULE,
+ .auto_attach = ni_660x_auto_attach,
+ .detach = ni_660x_detach,
+};
+
+static int ni_660x_pci_probe(struct pci_dev *dev,
+ const struct pci_device_id *ent)
+{
+ return comedi_pci_auto_config(dev, &ni_660x_driver);
+}
+
+static void ni_660x_pci_remove(struct pci_dev *dev)
+{
+ comedi_pci_auto_unconfig(dev);
+}
+
+static DEFINE_PCI_DEVICE_TABLE(ni_660x_pci_table) = {
+ {PCI_DEVICE(PCI_VENDOR_ID_NI, 0x2c60)},
+ {PCI_DEVICE(PCI_VENDOR_ID_NI, 0x1310)},
+ {PCI_DEVICE(PCI_VENDOR_ID_NI, 0x1360)},
+ {PCI_DEVICE(PCI_VENDOR_ID_NI, 0x2cc0)},
+ {0}
+};
+MODULE_DEVICE_TABLE(pci, ni_660x_pci_table);
+
+static struct pci_driver ni_660x_pci_driver = {
+ .name = "ni_660x",
+ .id_table = ni_660x_pci_table,
+ .probe = ni_660x_pci_probe,
+ .remove = ni_660x_pci_remove,
+};
+module_comedi_pci_driver(ni_660x_driver, ni_660x_pci_driver);
+
MODULE_AUTHOR("Comedi http://www.comedi.org");
MODULE_DESCRIPTION("Comedi low-level driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/ni_670x.c b/drivers/staging/comedi/drivers/ni_670x.c
index eac6dc0..272caeb 100644
--- a/drivers/staging/comedi/drivers/ni_670x.c
+++ b/drivers/staging/comedi/drivers/ni_670x.c
@@ -201,19 +201,21 @@
return NULL;
}
-static int __devinit ni_670x_attach_pci(struct comedi_device *dev,
- struct pci_dev *pcidev)
+static int ni_670x_auto_attach(struct comedi_device *dev,
+ unsigned long context_unused)
{
+ struct pci_dev *pcidev = comedi_to_pci_dev(dev);
const struct ni_670x_board *thisboard;
struct ni_670x_private *devpriv;
struct comedi_subdevice *s;
int ret;
int i;
- ret = alloc_private(dev, sizeof(*devpriv));
- if (ret < 0)
- return ret;
- devpriv = dev->private;
+ devpriv = kzalloc(sizeof(*devpriv), GFP_KERNEL);
+ if (!devpriv)
+ return -ENOMEM;
+ dev->private = devpriv;
+
dev->board_ptr = ni_670x_find_boardinfo(pcidev);
if (!dev->board_ptr)
return -ENODEV;
@@ -297,17 +299,17 @@
static struct comedi_driver ni_670x_driver = {
.driver_name = "ni_670x",
.module = THIS_MODULE,
- .attach_pci = ni_670x_attach_pci,
+ .auto_attach = ni_670x_auto_attach,
.detach = ni_670x_detach,
};
-static int __devinit ni_670x_pci_probe(struct pci_dev *dev,
+static int ni_670x_pci_probe(struct pci_dev *dev,
const struct pci_device_id *ent)
{
return comedi_pci_auto_config(dev, &ni_670x_driver);
}
-static void __devexit ni_670x_pci_remove(struct pci_dev *dev)
+static void ni_670x_pci_remove(struct pci_dev *dev)
{
comedi_pci_auto_unconfig(dev);
}
@@ -320,10 +322,10 @@
MODULE_DEVICE_TABLE(pci, ni_670x_pci_table);
static struct pci_driver ni_670x_pci_driver = {
- .name ="ni_670x",
+ .name = "ni_670x",
.id_table = ni_670x_pci_table,
.probe = ni_670x_pci_probe,
- .remove = __devexit_p(ni_670x_pci_remove),
+ .remove = ni_670x_pci_remove,
};
module_comedi_pci_driver(ni_670x_driver, ni_670x_pci_driver);
diff --git a/drivers/staging/comedi/drivers/ni_at_a2150.c b/drivers/staging/comedi/drivers/ni_at_a2150.c
index 8395080..06de25b 100644
--- a/drivers/staging/comedi/drivers/ni_at_a2150.c
+++ b/drivers/staging/comedi/drivers/ni_at_a2150.c
@@ -169,8 +169,6 @@
int config_bits; /* config register bits */
};
-#define devpriv ((struct a2150_private *)dev->private)
-
static int a2150_cancel(struct comedi_device *dev, struct comedi_subdevice *s);
static int a2150_get_timing(struct comedi_device *dev, unsigned int *period,
@@ -182,6 +180,8 @@
static void ni_dump_regs(struct comedi_device *dev)
{
+ struct a2150_private *devpriv = dev->private;
+
printk("config bits 0x%x\n", devpriv->config_bits);
printk("irq dma bits 0x%x\n", devpriv->irq_dma_bits);
printk("status bits 0x%x\n", inw(dev->iobase + STATUS_REG));
@@ -196,6 +196,7 @@
int status;
unsigned long flags;
struct comedi_device *dev = d;
+ struct a2150_private *devpriv = dev->private;
struct comedi_subdevice *s = dev->read_subdev;
struct comedi_async *async;
struct comedi_cmd *cmd;
@@ -300,6 +301,8 @@
static int a2150_cancel(struct comedi_device *dev, struct comedi_subdevice *s)
{
+ struct a2150_private *devpriv = dev->private;
+
/* disable dma on card */
devpriv->irq_dma_bits &= ~DMA_INTR_EN_BIT & ~DMA_EN_BIT;
outw(devpriv->irq_dma_bits, dev->iobase + IRQ_DMA_CNTRL_REG);
@@ -342,37 +345,21 @@
if (err)
return 2;
- /* step 3: make sure arguments are trivially compatible */
+ /* Step 3: check if arguments are trivially valid */
- if (cmd->start_arg != 0) {
- cmd->start_arg = 0;
- err++;
- }
- if (cmd->convert_src == TRIG_TIMER) {
- if (cmd->convert_arg < thisboard->ai_speed) {
- cmd->convert_arg = thisboard->ai_speed;
- err++;
- }
- }
- if (!cmd->chanlist_len) {
- cmd->chanlist_len = 1;
- err++;
- }
- if (cmd->scan_end_arg != cmd->chanlist_len) {
- cmd->scan_end_arg = cmd->chanlist_len;
- err++;
- }
- if (cmd->stop_src == TRIG_COUNT) {
- if (!cmd->stop_arg) {
- cmd->stop_arg = 1;
- err++;
- }
- } else { /* TRIG_NONE */
- if (cmd->stop_arg != 0) {
- cmd->stop_arg = 0;
- err++;
- }
- }
+ err |= cfc_check_trigger_arg_is(&cmd->start_arg, 0);
+
+ if (cmd->convert_src == TRIG_TIMER)
+ err |= cfc_check_trigger_arg_min(&cmd->convert_arg,
+ thisboard->ai_speed);
+
+ err |= cfc_check_trigger_arg_min(&cmd->chanlist_len, 1);
+ err |= cfc_check_trigger_arg_is(&cmd->scan_end_arg, cmd->chanlist_len);
+
+ if (cmd->stop_src == TRIG_COUNT)
+ err |= cfc_check_trigger_arg_min(&cmd->stop_arg, 1);
+ else /* TRIG_NONE */
+ err |= cfc_check_trigger_arg_is(&cmd->stop_arg, 0);
if (err)
return 3;
@@ -425,6 +412,7 @@
static int a2150_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
{
+ struct a2150_private *devpriv = dev->private;
struct comedi_async *async = s->async;
struct comedi_cmd *cmd = &async->cmd;
unsigned long lock_flags;
@@ -536,6 +524,7 @@
static int a2150_ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
+ struct a2150_private *devpriv = dev->private;
unsigned int i, n;
static const int timeout = 100000;
static const int filter_delay = 36;
@@ -615,6 +604,7 @@
static int a2150_get_timing(struct comedi_device *dev, unsigned int *period,
int flags)
{
+ struct a2150_private *devpriv = dev->private;
int lub, glb, temp;
int lub_divisor_shift, lub_index, glb_divisor_shift, glb_index;
int i, j;
@@ -689,6 +679,8 @@
unsigned int start_channel,
unsigned int num_channels)
{
+ struct a2150_private *devpriv = dev->private;
+
if (start_channel + num_channels > 4)
return -1;
@@ -727,6 +719,7 @@
static int a2150_attach(struct comedi_device *dev, struct comedi_devconfig *it)
{
+ struct a2150_private *devpriv;
struct comedi_subdevice *s;
unsigned long iobase = it->options[0];
unsigned int irq = it->options[1];
@@ -749,9 +742,10 @@
}
printk("\n");
- /* allocate and initialize dev->private */
- if (alloc_private(dev, sizeof(struct a2150_private)) < 0)
+ devpriv = kzalloc(sizeof(*devpriv), GFP_KERNEL);
+ if (!devpriv)
return -ENOMEM;
+ dev->private = devpriv;
if (iobase == 0) {
printk(" io base address required\n");
@@ -855,6 +849,8 @@
static void a2150_detach(struct comedi_device *dev)
{
+ struct a2150_private *devpriv = dev->private;
+
if (dev->iobase) {
outw(APD_BIT | DPD_BIT, dev->iobase + CONFIG_REG);
release_region(dev->iobase, A2150_SIZE);
diff --git a/drivers/staging/comedi/drivers/ni_at_ao.c b/drivers/staging/comedi/drivers/ni_at_ao.c
index 93938ce..907f65c 100644
--- a/drivers/staging/comedi/drivers/ni_at_ao.c
+++ b/drivers/staging/comedi/drivers/ni_at_ao.c
@@ -167,10 +167,10 @@
unsigned int ao_readback[10];
};
-#define devpriv ((struct atao_private *)dev->private)
-
static void atao_reset(struct comedi_device *dev)
{
+ struct atao_private *devpriv = dev->private;
+
/* This is the reset sequence described in the manual */
devpriv->cfg1 = 0;
@@ -202,6 +202,7 @@
static int atao_ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
+ struct atao_private *devpriv = dev->private;
int i;
int chan = CR_CHAN(insn->chanspec);
short bits;
@@ -226,6 +227,7 @@
static int atao_ao_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
+ struct atao_private *devpriv = dev->private;
int i;
int chan = CR_CHAN(insn->chanspec);
@@ -254,6 +256,7 @@
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
+ struct atao_private *devpriv = dev->private;
int chan = CR_CHAN(insn->chanspec);
unsigned int mask, bit;
@@ -309,6 +312,7 @@
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
+ struct atao_private *devpriv = dev->private;
unsigned int bitstring, bit;
unsigned int chan = CR_CHAN(insn->chanspec);
@@ -331,6 +335,7 @@
static int atao_attach(struct comedi_device *dev, struct comedi_devconfig *it)
{
const struct atao_board *board = comedi_board(dev);
+ struct atao_private *devpriv;
struct comedi_subdevice *s;
unsigned long iobase;
int ao_unipolar;
@@ -351,8 +356,10 @@
dev->board_name = board->name;
- if (alloc_private(dev, sizeof(struct atao_private)) < 0)
+ devpriv = kzalloc(sizeof(*devpriv), GFP_KERNEL);
+ if (!devpriv)
return -ENOMEM;
+ dev->private = devpriv;
ret = comedi_alloc_subdevices(dev, 4);
if (ret)
diff --git a/drivers/staging/comedi/drivers/ni_atmio.c b/drivers/staging/comedi/drivers/ni_atmio.c
index cac2557..2cc2996 100644
--- a/drivers/staging/comedi/drivers/ni_atmio.c
+++ b/drivers/staging/comedi/drivers/ni_atmio.c
@@ -284,8 +284,6 @@
};
-#define devpriv ((struct ni_private *)dev->private)
-
/* How we access registers */
#define ni_writel(a, b) (outl((a), (b)+dev->iobase))
@@ -303,6 +301,7 @@
static void ni_atmio_win_out(struct comedi_device *dev, uint16_t data, int addr)
{
+ struct ni_private *devpriv = dev->private;
unsigned long flags;
spin_lock_irqsave(&devpriv->window_lock, flags);
@@ -317,6 +316,7 @@
static uint16_t ni_atmio_win_in(struct comedi_device *dev, int addr)
{
+ struct ni_private *devpriv = dev->private;
unsigned long flags;
uint16_t ret;
@@ -406,16 +406,17 @@
static int ni_atmio_attach(struct comedi_device *dev,
struct comedi_devconfig *it)
{
+ struct ni_private *devpriv;
struct pnp_dev *isapnp_dev;
int ret;
unsigned long iobase;
int board;
unsigned int irq;
- /* allocate private area */
ret = ni_alloc_private(dev);
- if (ret < 0)
+ if (ret)
return ret;
+ devpriv = dev->private;
devpriv->stc_writew = &ni_atmio_win_out;
devpriv->stc_readw = &ni_atmio_win_in;
@@ -499,6 +500,8 @@
static void ni_atmio_detach(struct comedi_device *dev)
{
+ struct ni_private *devpriv = dev->private;
+
mio_common_detach(dev);
if (dev->iobase)
release_region(dev->iobase, NI_SIZE);
diff --git a/drivers/staging/comedi/drivers/ni_atmio16d.c b/drivers/staging/comedi/drivers/ni_atmio16d.c
index e91a620..4a17494f 100644
--- a/drivers/staging/comedi/drivers/ni_atmio16d.c
+++ b/drivers/staging/comedi/drivers/ni_atmio16d.c
@@ -102,7 +102,6 @@
#define CLOCK_100_HZ 0x8F25
/* Other miscellaneous defines */
#define ATMIO16D_SIZE 32 /* bus address range */
-#define devpriv ((struct atmio16d_private *)dev->private)
#define ATMIO16D_TIMEOUT 10
struct atmio16_board_t {
@@ -202,6 +201,7 @@
static void reset_atmio16d(struct comedi_device *dev)
{
+ struct atmio16d_private *devpriv = dev->private;
int i;
/* now we need to initialize the board */
@@ -271,51 +271,32 @@
if (err)
return 2;
- /* step 3: make sure arguments are trivially compatible */
+ /* Step 3: check if arguments are trivially valid */
- if (cmd->start_arg != 0) {
- cmd->start_arg = 0;
- err++;
- }
+ err |= cfc_check_trigger_arg_is(&cmd->start_arg, 0);
+
if (cmd->scan_begin_src == TRIG_FOLLOW) {
/* internal trigger */
- if (cmd->scan_begin_arg != 0) {
- cmd->scan_begin_arg = 0;
- err++;
- }
+ err |= cfc_check_trigger_arg_is(&cmd->scan_begin_arg, 0);
} else {
#if 0
/* external trigger */
/* should be level/edge, hi/lo specification here */
- if (cmd->scan_begin_arg != 0) {
- cmd->scan_begin_arg = 0;
- err++;
- }
+ err |= cfc_check_trigger_arg_is(&cmd->scan_begin_arg, 0);
#endif
}
- if (cmd->convert_arg < 10000) {
- cmd->convert_arg = 10000;
- err++;
- }
+ err |= cfc_check_trigger_arg_min(&cmd->convert_arg, 10000);
#if 0
- if (cmd->convert_arg > SLOWEST_TIMER) {
- cmd->convert_arg = SLOWEST_TIMER;
- err++;
- }
+ err |= cfc_check_trigger_arg_max(&cmd->convert_arg, SLOWEST_TIMER);
#endif
- if (cmd->scan_end_arg != cmd->chanlist_len) {
- cmd->scan_end_arg = cmd->chanlist_len;
- err++;
- }
+
+ err |= cfc_check_trigger_arg_is(&cmd->scan_end_arg, cmd->chanlist_len);
+
if (cmd->stop_src == TRIG_COUNT) {
/* any count is allowed */
- } else {
- /* TRIG_NONE */
- if (cmd->stop_arg != 0) {
- cmd->stop_arg = 0;
- err++;
- }
+ } else { /* TRIG_NONE */
+ err |= cfc_check_trigger_arg_is(&cmd->stop_arg, 0);
}
if (err)
@@ -327,6 +308,7 @@
static int atmio16d_ai_cmd(struct comedi_device *dev,
struct comedi_subdevice *s)
{
+ struct atmio16d_private *devpriv = dev->private;
struct comedi_cmd *cmd = &s->async->cmd;
unsigned int timer, base_clock;
unsigned int sample_count, tmp, chan, gain;
@@ -486,6 +468,7 @@
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
+ struct atmio16d_private *devpriv = dev->private;
int i, t;
int chan;
int gain;
@@ -539,6 +522,7 @@
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
+ struct atmio16d_private *devpriv = dev->private;
int i;
for (i = 0; i < insn->n; i++)
@@ -550,6 +534,7 @@
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
+ struct atmio16d_private *devpriv = dev->private;
int i;
int chan;
int d;
@@ -596,6 +581,7 @@
struct comedi_insn *insn,
unsigned int *data)
{
+ struct atmio16d_private *devpriv = dev->private;
int i;
int mask;
@@ -651,6 +637,7 @@
struct comedi_devconfig *it)
{
const struct atmio16_board_t *board = comedi_board(dev);
+ struct atmio16d_private *devpriv;
unsigned int irq;
unsigned long iobase;
int ret;
@@ -672,9 +659,10 @@
if (ret)
return ret;
- ret = alloc_private(dev, sizeof(struct atmio16d_private));
- if (ret < 0)
- return ret;
+ devpriv = kzalloc(sizeof(*devpriv), GFP_KERNEL);
+ if (!devpriv)
+ return -ENOMEM;
+ dev->private = devpriv;
/* reset the atmio16d hardware */
reset_atmio16d(dev);
diff --git a/drivers/staging/comedi/drivers/ni_daq_dio24.c b/drivers/staging/comedi/drivers/ni_daq_dio24.c
index 0ca222b..7b33335 100644
--- a/drivers/staging/comedi/drivers/ni_daq_dio24.c
+++ b/drivers/staging/comedi/drivers/ni_daq_dio24.c
@@ -96,8 +96,6 @@
int data; /* number of data points left to be taken */
};
-#define devpriv ((struct dio24_private *)dev->private)
-
static struct comedi_driver driver_dio24 = {
.driver_name = "ni_daq_dio24",
.module = THIS_MODULE,
@@ -110,6 +108,7 @@
static int dio24_attach(struct comedi_device *dev, struct comedi_devconfig *it)
{
+ struct dio24_private *devpriv;
struct comedi_subdevice *s;
unsigned long iobase = 0;
#ifdef incomplete
@@ -118,9 +117,10 @@
struct pcmcia_device *link;
int ret;
- /* allocate and initialize dev->private */
- if (alloc_private(dev, sizeof(struct dio24_private)) < 0)
+ devpriv = kzalloc(sizeof(*devpriv), GFP_KERNEL);
+ if (!devpriv)
return -ENOMEM;
+ dev->private = devpriv;
/* get base address, irq etc. based on bustype */
switch (thisboard->bustype) {
@@ -202,7 +202,7 @@
{
struct local_info_t *local;
- printk(KERN_INFO "ni_daq_dio24: HOLA SOY YO - CS-attach!\n");
+ dev_info(&link->dev, "ni_daq_dio24: HOLA SOY YO - CS-attach!\n");
dev_dbg(&link->dev, "dio24_cs_attach()\n");
@@ -242,7 +242,7 @@
{
int ret;
- printk(KERN_INFO "ni_daq_dio24: HOLA SOY YO! - config\n");
+ dev_info(&link->dev, "ni_daq_dio24: HOLA SOY YO! - config\n");
dev_dbg(&link->dev, "dio24_config\n");
@@ -265,7 +265,7 @@
return;
failed:
- printk(KERN_INFO "Fallo");
+ dev_info(&link->dev, "Fallo");
dio24_release(link);
} /* dio24_config */
diff --git a/drivers/staging/comedi/drivers/ni_labpc.c b/drivers/staging/comedi/drivers/ni_labpc.c
index b5a19a0..d29c4d7 100644
--- a/drivers/staging/comedi/drivers/ni_labpc.c
+++ b/drivers/staging/comedi/drivers/ni_labpc.c
@@ -487,8 +487,6 @@
/* 2 bytes per sample */
static const int sample_size = 2;
-#define devpriv ((struct labpc_private *)dev->private)
-
static inline int labpc_counter_load(struct comedi_device *dev,
unsigned long base_address,
unsigned int counter_number,
@@ -504,6 +502,7 @@
int labpc_common_attach(struct comedi_device *dev, unsigned long iobase,
unsigned int irq, unsigned int dma_chan)
{
+ struct labpc_private *devpriv = dev->private;
struct comedi_subdevice *s;
int i;
unsigned long isr_flags;
@@ -697,18 +696,23 @@
return NULL;
}
-static int __devinit labpc_attach_pci(struct comedi_device *dev,
- struct pci_dev *pcidev)
+static int labpc_auto_attach(struct comedi_device *dev,
+ unsigned long context_unused)
{
+ struct pci_dev *pcidev = comedi_to_pci_dev(dev);
+ struct labpc_private *devpriv;
unsigned long iobase;
unsigned int irq;
int ret;
if (!IS_ENABLED(CONFIG_COMEDI_PCI_DRIVERS))
return -ENODEV;
- ret = alloc_private(dev, sizeof(struct labpc_private));
- if (ret < 0)
- return ret;
+
+ devpriv = kzalloc(sizeof(*devpriv), GFP_KERNEL);
+ if (!devpriv)
+ return -ENOMEM;
+ dev->private = devpriv;
+
dev->board_ptr = labpc_pci_find_boardinfo(pcidev);
if (!dev->board_ptr)
return -ENODEV;
@@ -725,13 +729,15 @@
static int labpc_attach(struct comedi_device *dev, struct comedi_devconfig *it)
{
+ struct labpc_private *devpriv;
unsigned long iobase = 0;
unsigned int irq = 0;
unsigned int dma_chan = 0;
- /* allocate and initialize dev->private */
- if (alloc_private(dev, sizeof(struct labpc_private)) < 0)
+ devpriv = kzalloc(sizeof(*devpriv), GFP_KERNEL);
+ if (!devpriv)
return -ENOMEM;
+ dev->private = devpriv;
/* get base address, irq etc. based on bustype */
switch (thisboard->bustype) {
@@ -770,6 +776,7 @@
void labpc_common_detach(struct comedi_device *dev)
{
+ struct labpc_private *devpriv = dev->private;
struct comedi_subdevice *s;
if (!thisboard)
@@ -799,6 +806,8 @@
static void labpc_clear_adc_fifo(const struct comedi_device *dev)
{
+ struct labpc_private *devpriv = dev->private;
+
devpriv->write_byte(0x1, dev->iobase + ADC_CLEAR_REG);
devpriv->read_byte(dev->iobase + ADC_FIFO_REG);
devpriv->read_byte(dev->iobase + ADC_FIFO_REG);
@@ -806,6 +815,7 @@
static int labpc_cancel(struct comedi_device *dev, struct comedi_subdevice *s)
{
+ struct labpc_private *devpriv = dev->private;
unsigned long flags;
spin_lock_irqsave(&dev->spinlock, flags);
@@ -1016,56 +1026,34 @@
if (err)
return 2;
- /* step 3: make sure arguments are trivially compatible */
+ /* Step 3: check if arguments are trivially valid */
- if (cmd->start_arg == TRIG_NOW && cmd->start_arg != 0) {
- cmd->start_arg = 0;
- err++;
- }
+ if (cmd->start_arg == TRIG_NOW)
+ err |= cfc_check_trigger_arg_is(&cmd->start_arg, 0);
if (!cmd->chanlist_len)
- err++;
+ err |= -EINVAL;
+ err |= cfc_check_trigger_arg_is(&cmd->scan_end_arg, cmd->chanlist_len);
- if (cmd->scan_end_arg != cmd->chanlist_len) {
- cmd->scan_end_arg = cmd->chanlist_len;
- err++;
- }
+ if (cmd->convert_src == TRIG_TIMER)
+ err |= cfc_check_trigger_arg_min(&cmd->convert_arg,
+ thisboard->ai_speed);
- if (cmd->convert_src == TRIG_TIMER) {
- if (cmd->convert_arg < thisboard->ai_speed) {
- cmd->convert_arg = thisboard->ai_speed;
- err++;
- }
- }
/* make sure scan timing is not too fast */
if (cmd->scan_begin_src == TRIG_TIMER) {
- if (cmd->convert_src == TRIG_TIMER &&
- cmd->scan_begin_arg <
- cmd->convert_arg * cmd->chanlist_len) {
- cmd->scan_begin_arg =
- cmd->convert_arg * cmd->chanlist_len;
- err++;
- }
- if (cmd->scan_begin_arg <
- thisboard->ai_speed * cmd->chanlist_len) {
- cmd->scan_begin_arg =
- thisboard->ai_speed * cmd->chanlist_len;
- err++;
- }
+ if (cmd->convert_src == TRIG_TIMER)
+ err |= cfc_check_trigger_arg_min(&cmd->scan_begin_arg,
+ cmd->convert_arg * cmd->chanlist_len);
+ err |= cfc_check_trigger_arg_min(&cmd->scan_begin_arg,
+ thisboard->ai_speed * cmd->chanlist_len);
}
- /* stop source */
+
switch (cmd->stop_src) {
case TRIG_COUNT:
- if (!cmd->stop_arg) {
- cmd->stop_arg = 1;
- err++;
- }
+ err |= cfc_check_trigger_arg_min(&cmd->stop_arg, 1);
break;
case TRIG_NONE:
- if (cmd->stop_arg != 0) {
- cmd->stop_arg = 0;
- err++;
- }
+ err |= cfc_check_trigger_arg_is(&cmd->stop_arg, 0);
break;
/*
* TRIG_EXT doesn't care since it doesn't
@@ -1098,6 +1086,7 @@
static int labpc_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
{
+ struct labpc_private *devpriv = dev->private;
int channel, range, aref;
#ifdef CONFIG_ISA_DMA_API
unsigned long irq_flags;
@@ -1365,6 +1354,7 @@
static irqreturn_t labpc_interrupt(int irq, void *d)
{
struct comedi_device *dev = d;
+ struct labpc_private *devpriv = dev->private;
struct comedi_subdevice *s = dev->read_subdev;
struct comedi_async *async;
struct comedi_cmd *cmd;
@@ -1453,6 +1443,7 @@
/* read all available samples from ai fifo */
static int labpc_drain_fifo(struct comedi_device *dev)
{
+ struct labpc_private *devpriv = dev->private;
unsigned int lsb, msb;
short data;
struct comedi_async *async = dev->read_subdev->async;
@@ -1488,6 +1479,7 @@
#ifdef CONFIG_ISA_DMA_API
static void labpc_drain_dma(struct comedi_device *dev)
{
+ struct labpc_private *devpriv = dev->private;
struct comedi_subdevice *s = dev->read_subdev;
struct comedi_async *async = s->async;
int status;
@@ -1541,6 +1533,8 @@
static void handle_isa_dma(struct comedi_device *dev)
{
+ struct labpc_private *devpriv = dev->private;
+
labpc_drain_dma(dev);
enable_dma(devpriv->dma_chan);
@@ -1555,6 +1549,8 @@
static void labpc_drain_dregs(struct comedi_device *dev)
{
#ifdef CONFIG_ISA_DMA_API
+ struct labpc_private *devpriv = dev->private;
+
if (devpriv->current_transfer == isa_dma_transfer)
labpc_drain_dma(dev);
#endif
@@ -1565,6 +1561,7 @@
static int labpc_ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
+ struct labpc_private *devpriv = dev->private;
int i, n;
int chan, range;
int lsb, msb;
@@ -1654,6 +1651,7 @@
static int labpc_ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
+ struct labpc_private *devpriv = dev->private;
int channel, range;
unsigned long flags;
int lsb, msb;
@@ -1695,6 +1693,8 @@
static int labpc_ao_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
+ struct labpc_private *devpriv = dev->private;
+
data[0] = devpriv->ao_value[CR_CHAN(insn->chanspec)];
return 1;
@@ -1704,6 +1704,8 @@
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
+ struct labpc_private *devpriv = dev->private;
+
data[0] = devpriv->caldac[CR_CHAN(insn->chanspec)];
return 1;
@@ -1723,6 +1725,8 @@
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
+ struct labpc_private *devpriv = dev->private;
+
data[0] = devpriv->eeprom_data[CR_CHAN(insn->chanspec)];
return 1;
@@ -1779,6 +1783,7 @@
static void labpc_adc_timing(struct comedi_device *dev, struct comedi_cmd *cmd,
enum scan_mode mode)
{
+ struct labpc_private *devpriv = dev->private;
/* max value for 16 bit counter in mode 2 */
const int max_counter_value = 0x10000;
/* min value for 16 bit counter in mode 2 */
@@ -1885,6 +1890,7 @@
static void labpc_serial_out(struct comedi_device *dev, unsigned int value,
unsigned int value_width)
{
+ struct labpc_private *devpriv = dev->private;
int i;
for (i = 1; i <= value_width; i++) {
@@ -1909,6 +1915,7 @@
/* lowlevel read from eeprom */
static unsigned int labpc_serial_in(struct comedi_device *dev)
{
+ struct labpc_private *devpriv = dev->private;
unsigned int value = 0;
int i;
const int value_width = 8; /* number of bits wide values are */
@@ -1938,6 +1945,7 @@
static unsigned int labpc_eeprom_read(struct comedi_device *dev,
unsigned int address)
{
+ struct labpc_private *devpriv = dev->private;
unsigned int value;
/* bits to tell eeprom to expect a read */
const int read_instruction = 0x3;
@@ -1970,6 +1978,7 @@
static int labpc_eeprom_write(struct comedi_device *dev,
unsigned int address, unsigned int value)
{
+ struct labpc_private *devpriv = dev->private;
const int write_enable_instruction = 0x6;
const int write_instruction = 0x2;
const int write_length = 8; /* 8 bit write lengths to eeprom */
@@ -2027,6 +2036,7 @@
static unsigned int labpc_eeprom_read_status(struct comedi_device *dev)
{
+ struct labpc_private *devpriv = dev->private;
unsigned int value;
const int read_status_instruction = 0x5;
const int write_length = 8; /* 8 bit write lengths to eeprom */
@@ -2056,6 +2066,8 @@
static void write_caldac(struct comedi_device *dev, unsigned int channel,
unsigned int value)
{
+ struct labpc_private *devpriv = dev->private;
+
if (value == devpriv->caldac[channel])
return;
devpriv->caldac[channel] = value;
@@ -2084,7 +2096,7 @@
.driver_name = DRV_NAME,
.module = THIS_MODULE,
.attach = labpc_attach,
- .attach_pci = labpc_attach_pci,
+ .auto_attach = labpc_auto_attach,
.detach = labpc_common_detach,
.num_names = ARRAY_SIZE(labpc_boards),
.board_name = &labpc_boards[0].name,
@@ -2098,13 +2110,13 @@
};
MODULE_DEVICE_TABLE(pci, labpc_pci_table);
-static int __devinit labpc_pci_probe(struct pci_dev *dev,
+static int labpc_pci_probe(struct pci_dev *dev,
const struct pci_device_id *ent)
{
return comedi_pci_auto_config(dev, &labpc_driver);
}
-static void __devexit labpc_pci_remove(struct pci_dev *dev)
+static void labpc_pci_remove(struct pci_dev *dev)
{
comedi_pci_auto_unconfig(dev);
}
@@ -2113,7 +2125,7 @@
.name = DRV_NAME,
.id_table = labpc_pci_table,
.probe = labpc_pci_probe,
- .remove = __devexit_p(labpc_pci_remove)
+ .remove = labpc_pci_remove
};
module_comedi_pci_driver(labpc_driver, labpc_pci_driver);
#else
diff --git a/drivers/staging/comedi/drivers/ni_labpc_cs.c b/drivers/staging/comedi/drivers/ni_labpc_cs.c
index eb0417e..bfe19fa 100644
--- a/drivers/staging/comedi/drivers/ni_labpc_cs.c
+++ b/drivers/staging/comedi/drivers/ni_labpc_cs.c
@@ -127,13 +127,15 @@
static int labpc_attach(struct comedi_device *dev, struct comedi_devconfig *it)
{
+ struct labpc_private *devpriv;
unsigned long iobase = 0;
unsigned int irq = 0;
struct pcmcia_device *link;
- /* allocate and initialize dev->private */
- if (alloc_private(dev, sizeof(struct labpc_private)) < 0)
+ devpriv = kzalloc(sizeof(*devpriv), GFP_KERNEL);
+ if (!devpriv)
return -ENOMEM;
+ dev->private = devpriv;
/* get base address, irq etc. based on bustype */
switch (thisboard->bustype) {
diff --git a/drivers/staging/comedi/drivers/ni_mio_common.c b/drivers/staging/comedi/drivers/ni_mio_common.c
index 3e5fdae..56dc599 100644
--- a/drivers/staging/comedi/drivers/ni_mio_common.c
+++ b/drivers/staging/comedi/drivers/ni_mio_common.c
@@ -410,6 +410,7 @@
static inline void ni_set_bitfield(struct comedi_device *dev, int reg,
unsigned bit_mask, unsigned bit_values)
{
+ struct ni_private *devpriv = dev->private;
unsigned long flags;
spin_lock_irqsave(&devpriv->soft_reg_copy_lock, flags);
@@ -506,6 +507,7 @@
static inline void ni_set_cdo_dma_channel(struct comedi_device *dev,
int mite_channel)
{
+ struct ni_private *devpriv = dev->private;
unsigned long flags;
spin_lock_irqsave(&devpriv->soft_reg_copy_lock, flags);
@@ -525,6 +527,7 @@
static int ni_request_ai_mite_channel(struct comedi_device *dev)
{
+ struct ni_private *devpriv = dev->private;
unsigned long flags;
spin_lock_irqsave(&devpriv->mite_channel_lock, flags);
@@ -545,6 +548,7 @@
static int ni_request_ao_mite_channel(struct comedi_device *dev)
{
+ struct ni_private *devpriv = dev->private;
unsigned long flags;
spin_lock_irqsave(&devpriv->mite_channel_lock, flags);
@@ -567,6 +571,7 @@
unsigned gpct_index,
enum comedi_io_direction direction)
{
+ struct ni_private *devpriv = dev->private;
unsigned long flags;
struct mite_channel *mite_chan;
@@ -595,6 +600,7 @@
static int ni_request_cdo_mite_channel(struct comedi_device *dev)
{
#ifdef PCIDMA
+ struct ni_private *devpriv = dev->private;
unsigned long flags;
spin_lock_irqsave(&devpriv->mite_channel_lock, flags);
@@ -617,6 +623,7 @@
static void ni_release_ai_mite_channel(struct comedi_device *dev)
{
#ifdef PCIDMA
+ struct ni_private *devpriv = dev->private;
unsigned long flags;
spin_lock_irqsave(&devpriv->mite_channel_lock, flags);
@@ -632,6 +639,7 @@
static void ni_release_ao_mite_channel(struct comedi_device *dev)
{
#ifdef PCIDMA
+ struct ni_private *devpriv = dev->private;
unsigned long flags;
spin_lock_irqsave(&devpriv->mite_channel_lock, flags);
@@ -648,6 +656,7 @@
static void ni_release_gpct_mite_channel(struct comedi_device *dev,
unsigned gpct_index)
{
+ struct ni_private *devpriv = dev->private;
unsigned long flags;
BUG_ON(gpct_index >= NUM_GPCT);
@@ -669,6 +678,7 @@
static void ni_release_cdo_mite_channel(struct comedi_device *dev)
{
#ifdef PCIDMA
+ struct ni_private *devpriv = dev->private;
unsigned long flags;
spin_lock_irqsave(&devpriv->mite_channel_lock, flags);
@@ -686,6 +696,8 @@
static void ni_e_series_enable_second_irq(struct comedi_device *dev,
unsigned gpct_index, short enable)
{
+ struct ni_private *devpriv = dev->private;
+
if (boardtype.reg_type & ni_reg_m_series_mask)
return;
switch (gpct_index) {
@@ -716,6 +728,8 @@
static void ni_clear_ai_fifo(struct comedi_device *dev)
{
+ struct ni_private *devpriv = dev->private;
+
if (boardtype.reg_type == ni_reg_6143) {
/* Flush the 6143 data FIFO */
ni_writel(0x10, AIFIFO_Control_6143); /* Flush fifo */
@@ -742,13 +756,17 @@
static void win_out2(struct comedi_device *dev, uint32_t data, int reg)
{
+ struct ni_private *devpriv = dev->private;
+
devpriv->stc_writew(dev, data >> 16, reg);
devpriv->stc_writew(dev, data & 0xffff, reg + 1);
}
static uint32_t win_in2(struct comedi_device *dev, int reg)
{
+ struct ni_private *devpriv = dev->private;
uint32_t bits;
+
bits = devpriv->stc_readw(dev, reg) << 16;
bits |= devpriv->stc_readw(dev, reg + 1);
return bits;
@@ -758,6 +776,7 @@
static inline void ni_ao_win_outw(struct comedi_device *dev, uint16_t data,
int addr)
{
+ struct ni_private *devpriv = dev->private;
unsigned long flags;
spin_lock_irqsave(&devpriv->window_lock, flags);
@@ -769,6 +788,7 @@
static inline void ni_ao_win_outl(struct comedi_device *dev, uint32_t data,
int addr)
{
+ struct ni_private *devpriv = dev->private;
unsigned long flags;
spin_lock_irqsave(&devpriv->window_lock, flags);
@@ -779,6 +799,7 @@
static inline unsigned short ni_ao_win_inw(struct comedi_device *dev, int addr)
{
+ struct ni_private *devpriv = dev->private;
unsigned long flags;
unsigned short data;
@@ -814,6 +835,7 @@
static irqreturn_t ni_E_interrupt(int irq, void *d)
{
struct comedi_device *dev = d;
+ struct ni_private *devpriv = dev->private;
unsigned short a_status;
unsigned short b_status;
unsigned int ai_mite_status = 0;
@@ -872,6 +894,7 @@
#ifdef PCIDMA
static void ni_sync_ai_dma(struct comedi_device *dev)
{
+ struct ni_private *devpriv = dev->private;
struct comedi_subdevice *s = &dev->subdevices[NI_AI_SUBDEV];
unsigned long flags;
@@ -884,6 +907,7 @@
static void mite_handle_b_linkc(struct mite_struct *mite,
struct comedi_device *dev)
{
+ struct ni_private *devpriv = dev->private;
struct comedi_subdevice *s = &dev->subdevices[NI_AO_SUBDEV];
unsigned long flags;
@@ -896,6 +920,7 @@
static int ni_ao_wait_for_dma_load(struct comedi_device *dev)
{
+ struct ni_private *devpriv = dev->private;
static const int timeout = 10000;
int i;
for (i = 0; i < timeout; i++) {
@@ -918,6 +943,8 @@
#endif /* PCIDMA */
static void ni_handle_eos(struct comedi_device *dev, struct comedi_subdevice *s)
{
+ struct ni_private *devpriv = dev->private;
+
if (devpriv->aimode == AIMODE_SCAN) {
#ifdef PCIDMA
static const int timeout = 10;
@@ -984,6 +1011,7 @@
unsigned short counter_index)
{
#ifdef PCIDMA
+ struct ni_private *devpriv = dev->private;
struct comedi_subdevice *s;
s = &dev->subdevices[NI_GPCT_SUBDEV(counter_index)];
@@ -997,6 +1025,7 @@
static void ack_a_interrupt(struct comedi_device *dev, unsigned short a_status)
{
+ struct ni_private *devpriv = dev->private;
unsigned short ack = 0;
if (a_status & AI_SC_TC_St) {
@@ -1019,6 +1048,7 @@
static void handle_a_interrupt(struct comedi_device *dev, unsigned short status,
unsigned ai_mite_status)
{
+ struct ni_private *devpriv = dev->private;
struct comedi_subdevice *s = &dev->subdevices[NI_AI_SUBDEV];
/* 67xx boards don't have ai subdevice, but their gpct0 might generate an a interrupt */
@@ -1122,7 +1152,9 @@
static void ack_b_interrupt(struct comedi_device *dev, unsigned short b_status)
{
+ struct ni_private *devpriv = dev->private;
unsigned short ack = 0;
+
if (b_status & AO_BC_TC_St) {
ack |= AO_BC_TC_Interrupt_Ack;
}
@@ -1151,8 +1183,10 @@
static void handle_b_interrupt(struct comedi_device *dev,
unsigned short b_status, unsigned ao_mite_status)
{
+ struct ni_private *devpriv = dev->private;
struct comedi_subdevice *s = &dev->subdevices[NI_AO_SUBDEV];
/* unsigned short ack=0; */
+
#ifdef DEBUG_INTERRUPT
printk("ni_mio_common: interrupt: b_status=%04x m1_status=%08x\n",
b_status, ao_mite_status);
@@ -1340,6 +1374,7 @@
static int ni_ao_prep_fifo(struct comedi_device *dev,
struct comedi_subdevice *s)
{
+ struct ni_private *devpriv = dev->private;
int n;
/* reset fifo */
@@ -1364,6 +1399,7 @@
static void ni_ai_fifo_read(struct comedi_device *dev,
struct comedi_subdevice *s, int n)
{
+ struct ni_private *devpriv = dev->private;
struct comedi_async *async = s->async;
int i;
@@ -1434,6 +1470,7 @@
#ifdef PCIDMA
static int ni_ai_drain_dma(struct comedi_device *dev)
{
+ struct ni_private *devpriv = dev->private;
int i;
static const int timeout = 10000;
unsigned long flags;
@@ -1471,6 +1508,7 @@
*/
static void ni_handle_fifo_dregs(struct comedi_device *dev)
{
+ struct ni_private *devpriv = dev->private;
struct comedi_subdevice *s = &dev->subdevices[NI_AI_SUBDEV];
short data[2];
u32 dl;
@@ -1535,6 +1573,7 @@
static void get_last_sample_611x(struct comedi_device *dev)
{
+ struct ni_private *devpriv __maybe_unused = dev->private;
struct comedi_subdevice *s = &dev->subdevices[NI_AI_SUBDEV];
short data;
u32 dl;
@@ -1552,6 +1591,7 @@
static void get_last_sample_6143(struct comedi_device *dev)
{
+ struct ni_private *devpriv __maybe_unused = dev->private;
struct comedi_subdevice *s = &dev->subdevices[NI_AI_SUBDEV];
short data;
u32 dl;
@@ -1574,11 +1614,13 @@
void *data, unsigned int num_bytes,
unsigned int chan_index)
{
+ struct ni_private *devpriv = dev->private;
struct comedi_async *async = s->async;
unsigned int i;
unsigned int length = num_bytes / bytes_per_sample(s);
short *array = data;
unsigned int *larray = data;
+
for (i = 0; i < length; i++) {
#ifdef PCIDMA
if (s->subdev_flags & SDF_LSAMPL)
@@ -1599,6 +1641,7 @@
static int ni_ai_setup_MITE_dma(struct comedi_device *dev)
{
+ struct ni_private *devpriv = dev->private;
struct comedi_subdevice *s = &dev->subdevices[NI_AI_SUBDEV];
int retval;
unsigned long flags;
@@ -1638,6 +1681,7 @@
static int ni_ao_setup_MITE_dma(struct comedi_device *dev)
{
+ struct ni_private *devpriv = dev->private;
struct comedi_subdevice *s = &dev->subdevices[NI_AO_SUBDEV];
int retval;
unsigned long flags;
@@ -1676,6 +1720,8 @@
static int ni_ai_reset(struct comedi_device *dev, struct comedi_subdevice *s)
{
+ struct ni_private *devpriv = dev->private;
+
ni_release_ai_mite_channel(dev);
/* ai configuration */
devpriv->stc_writew(dev, AI_Configuration_Start | AI_Reset,
@@ -1786,6 +1832,7 @@
struct comedi_subdevice *s, struct comedi_insn *insn,
unsigned int *data)
{
+ struct ni_private *devpriv = dev->private;
int i, n;
const unsigned int mask = (1 << boardtype.adbits) - 1;
unsigned signbits;
@@ -1881,7 +1928,9 @@
static void ni_prime_channelgain_list(struct comedi_device *dev)
{
+ struct ni_private *devpriv = dev->private;
int i;
+
devpriv->stc_writew(dev, AI_CONVERT_Pulse, AI_Command_1_Register);
for (i = 0; i < NI_TIMEOUT; ++i) {
if (!(devpriv->stc_readw(dev,
@@ -1899,6 +1948,7 @@
unsigned int n_chan,
unsigned int *list)
{
+ struct ni_private *devpriv = dev->private;
unsigned int chan, range, aref;
unsigned int i;
unsigned offset;
@@ -2004,6 +2054,7 @@
static void ni_load_channelgain_list(struct comedi_device *dev,
unsigned int n_chan, unsigned int *list)
{
+ struct ni_private *devpriv = dev->private;
unsigned int chan, range, aref;
unsigned int i;
unsigned int hi, lo;
@@ -2122,7 +2173,9 @@
static int ni_ns_to_timer(const struct comedi_device *dev, unsigned nanosec,
int round_mode)
{
+ struct ni_private *devpriv = dev->private;
int divider;
+
switch (round_mode) {
case TRIG_ROUND_NEAREST:
default:
@@ -2140,6 +2193,8 @@
static unsigned ni_timer_to_ns(const struct comedi_device *dev, int timer)
{
+ struct ni_private *devpriv = dev->private;
+
return devpriv->clock_ns * (timer + 1);
}
@@ -2162,6 +2217,7 @@
static int ni_ai_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s,
struct comedi_cmd *cmd)
{
+ struct ni_private *devpriv = dev->private;
int err = 0;
int tmp;
unsigned int sources;
@@ -2200,7 +2256,7 @@
if (err)
return 2;
- /* step 3: make sure arguments are trivially compatible */
+ /* Step 3: check if arguments are trivially valid */
if (cmd->start_src == TRIG_EXT) {
/* external trigger */
@@ -2209,30 +2265,17 @@
if (tmp > 16)
tmp = 16;
tmp |= (cmd->start_arg & (CR_INVERT | CR_EDGE));
- if (cmd->start_arg != tmp) {
- cmd->start_arg = tmp;
- err++;
- }
+ err |= cfc_check_trigger_arg_is(&cmd->start_arg, tmp);
} else {
- if (cmd->start_arg != 0) {
- /* true for both TRIG_NOW and TRIG_INT */
- cmd->start_arg = 0;
- err++;
- }
+ /* true for both TRIG_NOW and TRIG_INT */
+ err |= cfc_check_trigger_arg_is(&cmd->start_arg, 0);
}
+
if (cmd->scan_begin_src == TRIG_TIMER) {
- if (cmd->scan_begin_arg < ni_min_ai_scan_period_ns(dev,
- cmd->
- chanlist_len))
- {
- cmd->scan_begin_arg =
- ni_min_ai_scan_period_ns(dev, cmd->chanlist_len);
- err++;
- }
- if (cmd->scan_begin_arg > devpriv->clock_ns * 0xffffff) {
- cmd->scan_begin_arg = devpriv->clock_ns * 0xffffff;
- err++;
- }
+ err |= cfc_check_trigger_arg_min(&cmd->scan_begin_arg,
+ ni_min_ai_scan_period_ns(dev, cmd->chanlist_len));
+ err |= cfc_check_trigger_arg_max(&cmd->scan_begin_arg,
+ devpriv->clock_ns * 0xffffff);
} else if (cmd->scan_begin_src == TRIG_EXT) {
/* external trigger */
unsigned int tmp = CR_CHAN(cmd->scan_begin_arg);
@@ -2240,32 +2283,20 @@
if (tmp > 16)
tmp = 16;
tmp |= (cmd->scan_begin_arg & (CR_INVERT | CR_EDGE));
- if (cmd->scan_begin_arg != tmp) {
- cmd->scan_begin_arg = tmp;
- err++;
- }
+ err |= cfc_check_trigger_arg_is(&cmd->scan_begin_arg, tmp);
} else { /* TRIG_OTHER */
- if (cmd->scan_begin_arg) {
- cmd->scan_begin_arg = 0;
- err++;
- }
+ err |= cfc_check_trigger_arg_is(&cmd->scan_begin_arg, 0);
}
+
if (cmd->convert_src == TRIG_TIMER) {
if ((boardtype.reg_type == ni_reg_611x)
|| (boardtype.reg_type == ni_reg_6143)) {
- if (cmd->convert_arg != 0) {
- cmd->convert_arg = 0;
- err++;
- }
+ err |= cfc_check_trigger_arg_is(&cmd->convert_arg, 0);
} else {
- if (cmd->convert_arg < boardtype.ai_speed) {
- cmd->convert_arg = boardtype.ai_speed;
- err++;
- }
- if (cmd->convert_arg > devpriv->clock_ns * 0xffff) {
- cmd->convert_arg = devpriv->clock_ns * 0xffff;
- err++;
- }
+ err |= cfc_check_trigger_arg_min(&cmd->convert_arg,
+ boardtype.ai_speed);
+ err |= cfc_check_trigger_arg_max(&cmd->convert_arg,
+ devpriv->clock_ns * 0xffff);
}
} else if (cmd->convert_src == TRIG_EXT) {
/* external trigger */
@@ -2274,40 +2305,23 @@
if (tmp > 16)
tmp = 16;
tmp |= (cmd->convert_arg & (CR_ALT_FILTER | CR_INVERT));
- if (cmd->convert_arg != tmp) {
- cmd->convert_arg = tmp;
- err++;
- }
+ err |= cfc_check_trigger_arg_is(&cmd->convert_arg, tmp);
} else if (cmd->convert_src == TRIG_NOW) {
- if (cmd->convert_arg != 0) {
- cmd->convert_arg = 0;
- err++;
- }
+ err |= cfc_check_trigger_arg_is(&cmd->convert_arg, 0);
}
- if (cmd->scan_end_arg != cmd->chanlist_len) {
- cmd->scan_end_arg = cmd->chanlist_len;
- err++;
- }
+ err |= cfc_check_trigger_arg_is(&cmd->scan_end_arg, cmd->chanlist_len);
+
if (cmd->stop_src == TRIG_COUNT) {
unsigned int max_count = 0x01000000;
if (boardtype.reg_type == ni_reg_611x)
max_count -= num_adc_stages_611x;
- if (cmd->stop_arg > max_count) {
- cmd->stop_arg = max_count;
- err++;
- }
- if (cmd->stop_arg < 1) {
- cmd->stop_arg = 1;
- err++;
- }
+ err |= cfc_check_trigger_arg_max(&cmd->stop_arg, max_count);
+ err |= cfc_check_trigger_arg_min(&cmd->stop_arg, 1);
} else {
/* TRIG_NONE */
- if (cmd->stop_arg != 0) {
- cmd->stop_arg = 0;
- err++;
- }
+ err |= cfc_check_trigger_arg_is(&cmd->stop_arg, 0);
}
if (err)
@@ -2356,6 +2370,7 @@
static int ni_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
{
+ struct ni_private *devpriv = dev->private;
const struct comedi_cmd *cmd = &s->async->cmd;
int timer;
int mode1 = 0; /* mode1 is needed for both stop and convert */
@@ -2662,6 +2677,8 @@
static int ni_ai_inttrig(struct comedi_device *dev, struct comedi_subdevice *s,
unsigned int trignum)
{
+ struct ni_private *devpriv = dev->private;
+
if (trignum != 0)
return -EINVAL;
@@ -2681,6 +2698,8 @@
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
+ struct ni_private *devpriv = dev->private;
+
if (insn->n < 1)
return -EINVAL;
@@ -2734,6 +2753,7 @@
struct comedi_insn *insn,
unsigned int *data)
{
+ struct ni_private *devpriv = dev->private;
unsigned int a, b, modebits;
int err = 0;
@@ -2857,6 +2877,7 @@
unsigned int chanspec[],
unsigned int n_chans, int timed)
{
+ struct ni_private *devpriv = dev->private;
unsigned int range;
unsigned int chan;
unsigned int conf;
@@ -2928,6 +2949,7 @@
unsigned int chanspec[],
unsigned int n_chans)
{
+ struct ni_private *devpriv = dev->private;
unsigned int range;
unsigned int chan;
unsigned int conf;
@@ -2984,6 +3006,8 @@
struct comedi_subdevice *s, struct comedi_insn *insn,
unsigned int *data)
{
+ struct ni_private *devpriv = dev->private;
+
data[0] = devpriv->ao[CR_CHAN(insn->chanspec)];
return 1;
@@ -2993,6 +3017,7 @@
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
+ struct ni_private *devpriv = dev->private;
unsigned int chan = CR_CHAN(insn->chanspec);
unsigned int invert;
@@ -3013,6 +3038,7 @@
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
+ struct ni_private *devpriv = dev->private;
unsigned int chan = CR_CHAN(insn->chanspec);
unsigned int invert;
@@ -3031,6 +3057,8 @@
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
+ struct ni_private *devpriv = dev->private;
+
switch (data[0]) {
case INSN_CONFIG_GET_HARDWARE_BUFFER_SIZE:
switch (data[1]) {
@@ -3057,6 +3085,7 @@
static int ni_ao_inttrig(struct comedi_device *dev, struct comedi_subdevice *s,
unsigned int trignum)
{
+ struct ni_private *devpriv = dev->private;
int ret;
int interrupt_b_bits;
int i;
@@ -3126,6 +3155,7 @@
static int ni_ao_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
{
+ struct ni_private *devpriv = dev->private;
const struct comedi_cmd *cmd = &s->async->cmd;
int bits;
int i;
@@ -3330,6 +3360,7 @@
static int ni_ao_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s,
struct comedi_cmd *cmd)
{
+ struct ni_private *devpriv = dev->private;
int err = 0;
int tmp;
@@ -3359,7 +3390,7 @@
if (err)
return 2;
- /* step 3: make sure arguments are trivially compatible */
+ /* Step 3: check if arguments are trivially valid */
if (cmd->start_src == TRIG_EXT) {
/* external trigger */
@@ -3368,47 +3399,26 @@
if (tmp > 18)
tmp = 18;
tmp |= (cmd->start_arg & (CR_INVERT | CR_EDGE));
- if (cmd->start_arg != tmp) {
- cmd->start_arg = tmp;
- err++;
- }
+ err |= cfc_check_trigger_arg_is(&cmd->start_arg, tmp);
} else {
- if (cmd->start_arg != 0) {
- /* true for both TRIG_NOW and TRIG_INT */
- cmd->start_arg = 0;
- err++;
- }
+ /* true for both TRIG_NOW and TRIG_INT */
+ err |= cfc_check_trigger_arg_is(&cmd->start_arg, 0);
}
+
if (cmd->scan_begin_src == TRIG_TIMER) {
- if (cmd->scan_begin_arg < boardtype.ao_speed) {
- cmd->scan_begin_arg = boardtype.ao_speed;
- err++;
- }
- if (cmd->scan_begin_arg > devpriv->clock_ns * 0xffffff) { /* XXX check */
- cmd->scan_begin_arg = devpriv->clock_ns * 0xffffff;
- err++;
- }
+ err |= cfc_check_trigger_arg_min(&cmd->scan_begin_arg,
+ boardtype.ao_speed);
+ err |= cfc_check_trigger_arg_max(&cmd->scan_begin_arg,
+ devpriv->clock_ns * 0xffffff);
}
- if (cmd->convert_arg != 0) {
- cmd->convert_arg = 0;
- err++;
- }
- if (cmd->scan_end_arg != cmd->chanlist_len) {
- cmd->scan_end_arg = cmd->chanlist_len;
- err++;
- }
- if (cmd->stop_src == TRIG_COUNT) { /* XXX check */
- if (cmd->stop_arg > 0x00ffffff) {
- cmd->stop_arg = 0x00ffffff;
- err++;
- }
- } else {
- /* TRIG_NONE */
- if (cmd->stop_arg != 0) {
- cmd->stop_arg = 0;
- err++;
- }
- }
+
+ err |= cfc_check_trigger_arg_is(&cmd->convert_arg, 0);
+ err |= cfc_check_trigger_arg_is(&cmd->scan_end_arg, cmd->chanlist_len);
+
+ if (cmd->stop_src == TRIG_COUNT)
+ err |= cfc_check_trigger_arg_max(&cmd->stop_arg, 0x00ffffff);
+ else /* TRIG_NONE */
+ err |= cfc_check_trigger_arg_is(&cmd->stop_arg, 0);
if (err)
return 3;
@@ -3438,6 +3448,8 @@
static int ni_ao_reset(struct comedi_device *dev, struct comedi_subdevice *s)
{
+ struct ni_private *devpriv = dev->private;
+
/* devpriv->ao0p=0x0000; */
/* ni_writew(devpriv->ao0p,AO_Configuration); */
@@ -3491,6 +3503,8 @@
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
+ struct ni_private *devpriv = dev->private;
+
#ifdef DEBUG_DIO
printk("ni_dio_insn_config() chan=%d io=%d\n",
CR_CHAN(insn->chanspec), data[0]);
@@ -3524,6 +3538,8 @@
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
+ struct ni_private *devpriv = dev->private;
+
#ifdef DEBUG_DIO
printk("ni_dio_insn_bits() mask=0x%x bits=0x%x\n", data[0], data[1]);
#endif
@@ -3552,6 +3568,8 @@
struct comedi_insn *insn,
unsigned int *data)
{
+ struct ni_private *devpriv __maybe_unused = dev->private;
+
#ifdef DEBUG_DIO
printk("ni_m_series_dio_insn_config() chan=%d io=%d\n",
CR_CHAN(insn->chanspec), data[0]);
@@ -3584,6 +3602,8 @@
struct comedi_insn *insn,
unsigned int *data)
{
+ struct ni_private *devpriv __maybe_unused = dev->private;
+
#ifdef DEBUG_DIO
printk("ni_m_series_dio_insn_bits() mask=0x%x bits=0x%x\n", data[0],
data[1]);
@@ -3623,39 +3643,18 @@
if (err)
return 2;
- /* step 3: make sure arguments are trivially compatible */
- if (cmd->start_src == TRIG_INT) {
- if (cmd->start_arg != 0) {
- cmd->start_arg = 0;
- err++;
- }
- }
- if (cmd->scan_begin_src == TRIG_EXT) {
- tmp = cmd->scan_begin_arg;
- tmp &= CR_PACK_FLAGS(CDO_Sample_Source_Select_Mask, 0, 0,
- CR_INVERT);
- if (tmp != cmd->scan_begin_arg) {
- err++;
- }
- }
- if (cmd->convert_src == TRIG_NOW) {
- if (cmd->convert_arg) {
- cmd->convert_arg = 0;
- err++;
- }
- }
+ /* Step 3: check if arguments are trivially valid */
- if (cmd->scan_end_arg != cmd->chanlist_len) {
- cmd->scan_end_arg = cmd->chanlist_len;
- err++;
- }
+ err |= cfc_check_trigger_arg_is(&cmd->start_arg, 0);
- if (cmd->stop_src == TRIG_NONE) {
- if (cmd->stop_arg != 0) {
- cmd->stop_arg = 0;
- err++;
- }
- }
+ tmp = cmd->scan_begin_arg;
+ tmp &= CR_PACK_FLAGS(CDO_Sample_Source_Select_Mask, 0, 0, CR_INVERT);
+ if (tmp != cmd->scan_begin_arg)
+ err |= -EINVAL;
+
+ err |= cfc_check_trigger_arg_is(&cmd->convert_arg, 0);
+ err |= cfc_check_trigger_arg_is(&cmd->scan_end_arg, cmd->chanlist_len);
+ err |= cfc_check_trigger_arg_is(&cmd->stop_arg, 0);
if (err)
return 3;
@@ -3680,6 +3679,7 @@
static int ni_cdio_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
{
+ struct ni_private *devpriv __maybe_unused = dev->private;
const struct comedi_cmd *cmd = &s->async->cmd;
unsigned cdo_mode_bits = CDO_FIFO_Mode_Bit | CDO_Halt_On_Error_Bit;
int retval;
@@ -3719,6 +3719,7 @@
unsigned int trignum)
{
#ifdef PCIDMA
+ struct ni_private *devpriv = dev->private;
unsigned long flags;
#endif
int retval = 0;
@@ -3766,6 +3767,8 @@
static int ni_cdio_cancel(struct comedi_device *dev, struct comedi_subdevice *s)
{
+ struct ni_private *devpriv __maybe_unused = dev->private;
+
ni_writel(CDO_Disarm_Bit | CDO_Error_Interrupt_Enable_Clear_Bit |
CDO_Empty_FIFO_Interrupt_Enable_Clear_Bit |
CDO_FIFO_Request_Interrupt_Enable_Clear_Bit,
@@ -3781,6 +3784,7 @@
static void handle_cdio_interrupt(struct comedi_device *dev)
{
+ struct ni_private *devpriv __maybe_unused = dev->private;
unsigned cdio_status;
struct comedi_subdevice *s = &dev->subdevices[NI_DIO_SUBDEV];
#ifdef PCIDMA
@@ -3824,6 +3828,7 @@
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
+ struct ni_private *devpriv = dev->private;
int err = insn->n;
unsigned char byte_out, byte_in = 0;
@@ -3920,6 +3925,7 @@
unsigned char data_out,
unsigned char *data_in)
{
+ struct ni_private *devpriv = dev->private;
unsigned int status1;
int err = 0, count = 20;
@@ -3978,6 +3984,7 @@
unsigned char data_out,
unsigned char *data_in)
{
+ struct ni_private *devpriv = dev->private;
unsigned char mask, input = 0;
#ifdef DEBUG_DIO
@@ -4031,9 +4038,10 @@
static void mio_common_detach(struct comedi_device *dev)
{
+ struct ni_private *devpriv = dev->private;
struct comedi_subdevice *s;
- if (dev->private) {
+ if (devpriv) {
if (devpriv->counter_dev) {
ni_gpct_device_destroy(devpriv->counter_dev);
}
@@ -4151,6 +4159,7 @@
enum ni_gpct_register reg)
{
struct comedi_device *dev = counter->counter_dev->dev;
+ struct ni_private *devpriv = dev->private;
unsigned stc_register;
/* bits in the join reset register which are relevant to counters */
static const unsigned gpct_joint_reset_mask = G0_Reset | G1_Reset;
@@ -4219,7 +4228,9 @@
enum ni_gpct_register reg)
{
struct comedi_device *dev = counter->counter_dev->dev;
+ struct ni_private *devpriv = dev->private;
unsigned stc_register;
+
switch (reg) {
/* m-series only registers */
case NITIO_G0_DMA_Status_Reg:
@@ -4251,6 +4262,8 @@
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
+ struct ni_private *devpriv = dev->private;
+
data[0] = devpriv->clock_and_fout & FOUT_Divider_mask;
return 1;
}
@@ -4259,6 +4272,8 @@
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
+ struct ni_private *devpriv = dev->private;
+
devpriv->clock_and_fout &= ~FOUT_Enable;
devpriv->stc_writew(dev, devpriv->clock_and_fout,
Clock_and_FOUT_Register);
@@ -4273,6 +4288,8 @@
static int ni_set_freq_out_clock(struct comedi_device *dev,
unsigned int clock_source)
{
+ struct ni_private *devpriv = dev->private;
+
switch (clock_source) {
case NI_FREQ_OUT_TIMEBASE_1_DIV_2_CLOCK_SRC:
devpriv->clock_and_fout &= ~FOUT_Timebase_Select;
@@ -4292,6 +4309,8 @@
unsigned int *clock_source,
unsigned int *clock_period_ns)
{
+ struct ni_private *devpriv = dev->private;
+
if (devpriv->clock_and_fout & FOUT_Timebase_Select) {
*clock_source = NI_FREQ_OUT_TIMEBASE_2_CLOCK_SRC;
*clock_period_ns = TIMEBASE_2_NS;
@@ -4320,11 +4339,12 @@
static int ni_alloc_private(struct comedi_device *dev)
{
- int ret;
+ struct ni_private *devpriv;
- ret = alloc_private(dev, sizeof(struct ni_private));
- if (ret < 0)
- return ret;
+ devpriv = kzalloc(sizeof(*devpriv), GFP_KERNEL);
+ if (!devpriv)
+ return -ENOMEM;
+ dev->private = devpriv;
spin_lock_init(&devpriv->window_lock);
spin_lock_init(&devpriv->soft_reg_copy_lock);
@@ -4335,6 +4355,7 @@
static int ni_E_init(struct comedi_device *dev)
{
+ struct ni_private *devpriv = dev->private;
struct comedi_subdevice *s;
unsigned j;
enum ni_gpct_variant counter_variant;
@@ -4661,6 +4682,7 @@
static int ni_8255_callback(int dir, int port, int data, unsigned long arg)
{
struct comedi_device *dev = (struct comedi_device *)arg;
+ struct ni_private *devpriv __maybe_unused = dev->private;
if (dir) {
ni_writeb(data, Port_A + 2 * port);
@@ -4689,6 +4711,7 @@
static int ni_read_eeprom(struct comedi_device *dev, int addr)
{
+ struct ni_private *devpriv __maybe_unused = dev->private;
int bit;
int bitstring;
@@ -4716,6 +4739,8 @@
struct comedi_insn *insn,
unsigned int *data)
{
+ struct ni_private *devpriv = dev->private;
+
data[0] = devpriv->eeprom_buffer[CR_CHAN(insn->chanspec)];
return 1;
@@ -4723,6 +4748,8 @@
static int ni_get_pwm_config(struct comedi_device *dev, unsigned int *data)
{
+ struct ni_private *devpriv = dev->private;
+
data[1] = devpriv->pwm_up_count * devpriv->clock_ns;
data[2] = devpriv->pwm_down_count * devpriv->clock_ns;
return 3;
@@ -4732,7 +4759,9 @@
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
+ struct ni_private *devpriv = dev->private;
unsigned up_count, down_count;
+
switch (data[0]) {
case INSN_CONFIG_PWM_OUTPUT:
switch (data[1]) {
@@ -4798,7 +4827,9 @@
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
+ struct ni_private *devpriv = dev->private;
unsigned up_count, down_count;
+
switch (data[0]) {
case INSN_CONFIG_PWM_OUTPUT:
switch (data[1]) {
@@ -4875,6 +4906,8 @@
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
+ struct ni_private *devpriv = dev->private;
+
data[0] = devpriv->caldacs[CR_CHAN(insn->chanspec)];
return 1;
@@ -4905,6 +4938,7 @@
static void caldac_setup(struct comedi_device *dev, struct comedi_subdevice *s)
{
+ struct ni_private *devpriv = dev->private;
int i, j;
int n_dacs;
int n_chans = 0;
@@ -4958,6 +4992,7 @@
static void ni_write_caldac(struct comedi_device *dev, int addr, int val)
{
+ struct ni_private *devpriv = dev->private;
unsigned int loadbit = 0, bits = 0, bit, bitstring = 0;
int i;
int type;
@@ -5211,8 +5246,10 @@
static int ni_m_series_set_pfi_routing(struct comedi_device *dev, unsigned chan,
unsigned source)
{
+ struct ni_private *devpriv = dev->private;
unsigned pfi_reg_index;
unsigned array_offset;
+
if ((source & 0x1f) != source)
return -EINVAL;
pfi_reg_index = 1 + chan / 3;
@@ -5247,7 +5284,9 @@
static unsigned ni_m_series_get_pfi_routing(struct comedi_device *dev,
unsigned chan)
{
+ struct ni_private *devpriv = dev->private;
const unsigned array_offset = chan / 3;
+
return MSeries_PFI_Output_Select_Source(chan,
devpriv->
pfi_output_select_reg
@@ -5306,7 +5345,9 @@
static int ni_config_filter(struct comedi_device *dev, unsigned pfi_channel,
enum ni_pfi_filter_select filter)
{
+ struct ni_private *devpriv __maybe_unused = dev->private;
unsigned bits;
+
if ((boardtype.reg_type & ni_reg_m_series_mask) == 0) {
return -ENOTSUPP;
}
@@ -5321,6 +5362,8 @@
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
+ struct ni_private *devpriv __maybe_unused = dev->private;
+
if ((boardtype.reg_type & ni_reg_m_series_mask) == 0) {
return -ENOTSUPP;
}
@@ -5337,6 +5380,7 @@
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
+ struct ni_private *devpriv = dev->private;
unsigned int chan;
if (insn->n < 1)
@@ -5379,6 +5423,8 @@
*/
static void ni_rtsi_init(struct comedi_device *dev)
{
+ struct ni_private *devpriv = dev->private;
+
/* Initialises the RTSI bus signal switch to a default state */
/* Set clock mode to internal */
@@ -5480,6 +5526,7 @@
static int ni_mseries_set_pll_master_clock(struct comedi_device *dev,
unsigned source, unsigned period_ns)
{
+ struct ni_private *devpriv = dev->private;
static const unsigned min_period_ns = 50;
static const unsigned max_period_ns = 1000;
static const unsigned timeout = 1000;
@@ -5488,6 +5535,7 @@
unsigned freq_multiplier;
unsigned i;
int retval;
+
if (source == NI_MIO_PLL_PXI10_CLOCK)
period_ns = 100;
/* these limits are somewhat arbitrary, but NI advertises 1 to 20MHz range so we'll use that */
@@ -5581,6 +5629,8 @@
static int ni_set_master_clock(struct comedi_device *dev, unsigned source,
unsigned period_ns)
{
+ struct ni_private *devpriv = dev->private;
+
if (source == NI_MIO_INTERNAL_CLOCK) {
devpriv->rtsi_trig_direction_reg &= ~Use_RTSI_Clock_Bit;
devpriv->stc_writew(dev, devpriv->rtsi_trig_direction_reg,
@@ -5666,6 +5716,8 @@
static int ni_set_rtsi_routing(struct comedi_device *dev, unsigned chan,
unsigned source)
{
+ struct ni_private *devpriv = dev->private;
+
if (ni_valid_rtsi_output_source(dev, chan, source) == 0)
return -EINVAL;
if (chan < 4) {
@@ -5686,6 +5738,8 @@
static unsigned ni_get_rtsi_routing(struct comedi_device *dev, unsigned chan)
{
+ struct ni_private *devpriv = dev->private;
+
if (chan < 4) {
return RTSI_Trig_Output_Source(chan,
devpriv->rtsi_trig_a_output_reg);
@@ -5704,7 +5758,9 @@
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
+ struct ni_private *devpriv = dev->private;
unsigned int chan = CR_CHAN(insn->chanspec);
+
switch (data[0]) {
case INSN_CONFIG_DIO_OUTPUT:
if (chan < num_configurable_rtsi_channels(dev)) {
diff --git a/drivers/staging/comedi/drivers/ni_mio_cs.c b/drivers/staging/comedi/drivers/ni_mio_cs.c
index ca4f8e0..76c6a13 100644
--- a/drivers/staging/comedi/drivers/ni_mio_cs.c
+++ b/drivers/staging/comedi/drivers/ni_mio_cs.c
@@ -175,9 +175,7 @@
struct pcmcia_device *link;
- NI_PRIVATE_COMMON};
-
-#define devpriv ((struct ni_private *)dev->private)
+NI_PRIVATE_COMMON};
/* How we access registers */
@@ -196,6 +194,7 @@
static void mio_cs_win_out(struct comedi_device *dev, uint16_t data, int addr)
{
+ struct ni_private *devpriv = dev->private;
unsigned long flags;
spin_lock_irqsave(&devpriv->window_lock, flags);
@@ -210,6 +209,7 @@
static uint16_t mio_cs_win_in(struct comedi_device *dev, int addr)
{
+ struct ni_private *devpriv = dev->private;
unsigned long flags;
uint16_t ret;
@@ -251,7 +251,7 @@
static void cs_release(struct pcmcia_device *link);
static void cs_detach(struct pcmcia_device *);
-static struct pcmcia_device *cur_dev = NULL;
+static struct pcmcia_device *cur_dev;
static int cs_attach(struct pcmcia_device *link)
{
@@ -324,6 +324,7 @@
static int mio_cs_attach(struct comedi_device *dev, struct comedi_devconfig *it)
{
+ struct ni_private *devpriv;
struct pcmcia_device *link;
unsigned int irq;
int ret;
@@ -339,13 +340,15 @@
irq = link->irq;
- printk("comedi%d: %s: DAQCard: io 0x%04lx, irq %u, ",
- dev->minor, dev->driver->driver_name, dev->iobase, irq);
+ dev->board_ptr = ni_boards + ni_getboardtype(dev, link);
#if 0
{
int i;
+ printk("comedi%d: %s: DAQCard: io 0x%04lx, irq %u, ",
+ dev->minor, dev->driver->driver_name, dev->iobase, irq);
+
printk(" board fingerprint:");
for (i = 0; i < 32; i += 2) {
printk(" %04x %02x", inw(dev->iobase + i),
@@ -356,26 +359,25 @@
for (i = 0; i < 10; i++)
printk(" 0x%04x", win_in(i));
printk("\n");
+
+ printk("boardtype.name: %s\n", boardtype.name);
}
#endif
- dev->board_ptr = ni_boards + ni_getboardtype(dev, link);
-
- printk(" %s", boardtype.name);
dev->board_name = boardtype.name;
ret = request_irq(irq, ni_E_interrupt, NI_E_IRQ_FLAGS,
"ni_mio_cs", dev);
if (ret < 0) {
- printk(" irq not available\n");
+ dev_err(dev->class_dev, "irq not available\n");
return -EINVAL;
}
dev->irq = irq;
- /* allocate private area */
ret = ni_alloc_private(dev);
- if (ret < 0)
+ if (ret)
return ret;
+ devpriv = dev->private;
devpriv->stc_writew = &mio_cs_win_out;
devpriv->stc_readw = &mio_cs_win_in;
@@ -400,7 +402,8 @@
return i;
}
- printk("unknown board 0x%04x -- pretend it is a ", link->card_id);
+ dev_err(dev->class_dev,
+ "unknown board 0x%04x -- pretend it is a ", link->card_id);
return 0;
}
diff --git a/drivers/staging/comedi/drivers/ni_pcidio.c b/drivers/staging/comedi/drivers/ni_pcidio.c
index bc9313e..084ebea 100644
--- a/drivers/staging/comedi/drivers/ni_pcidio.c
+++ b/drivers/staging/comedi/drivers/ni_pcidio.c
@@ -310,7 +310,6 @@
struct mite_dma_descriptor_ring *di_mite_ring;
spinlock_t mite_channel_lock;
};
-#define devpriv ((struct nidio96_private *)dev->private)
static int ni_pcidio_cmdtest(struct comedi_device *dev,
struct comedi_subdevice *s,
@@ -332,6 +331,7 @@
static int ni_pcidio_request_di_mite_channel(struct comedi_device *dev)
{
+ struct nidio96_private *devpriv = dev->private;
unsigned long flags;
spin_lock_irqsave(&devpriv->mite_channel_lock, flags);
@@ -355,6 +355,7 @@
static void ni_pcidio_release_di_mite_channel(struct comedi_device *dev)
{
+ struct nidio96_private *devpriv = dev->private;
unsigned long flags;
spin_lock_irqsave(&devpriv->mite_channel_lock, flags);
@@ -384,6 +385,7 @@
static int ni_pcidio_poll(struct comedi_device *dev, struct comedi_subdevice *s)
{
+ struct nidio96_private *devpriv = dev->private;
unsigned long irq_flags;
int count;
@@ -400,6 +402,7 @@
static irqreturn_t nidio_interrupt(int irq, void *d)
{
struct comedi_device *dev = d;
+ struct nidio96_private *devpriv = dev->private;
struct comedi_subdevice *s = &dev->subdevices[0];
struct comedi_async *async = s->async;
struct mite_struct *mite = devpriv->mite;
@@ -609,6 +612,7 @@
#ifdef unused
static void debug_int(struct comedi_device *dev)
{
+ struct nidio96_private *devpriv = dev->private;
int a, b;
static int n_int;
struct timeval tv;
@@ -640,6 +644,8 @@
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
+ struct nidio96_private *devpriv = dev->private;
+
if (insn->n != 1)
return -EINVAL;
switch (data[0]) {
@@ -668,6 +674,8 @@
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
+ struct nidio96_private *devpriv = dev->private;
+
if (data[0]) {
s->state &= ~data[0];
s->state |= (data[0] & data[1]);
@@ -707,46 +715,32 @@
if (err)
return 2;
- /* step 3: make sure arguments are trivially compatible */
+ /* Step 3: check if arguments are trivially valid */
- if (cmd->start_arg != 0) {
- /* same for both TRIG_INT and TRIG_NOW */
- cmd->start_arg = 0;
- err++;
- }
+ err |= cfc_check_trigger_arg_is(&cmd->start_arg, 0);
+
#define MAX_SPEED (TIMER_BASE) /* in nanoseconds */
if (cmd->scan_begin_src == TRIG_TIMER) {
- if (cmd->scan_begin_arg < MAX_SPEED) {
- cmd->scan_begin_arg = MAX_SPEED;
- err++;
- }
+ err |= cfc_check_trigger_arg_min(&cmd->scan_begin_arg,
+ MAX_SPEED);
/* no minimum speed */
} else {
/* TRIG_EXT */
/* should be level/edge, hi/lo specification here */
if ((cmd->scan_begin_arg & ~(CR_EDGE | CR_INVERT)) != 0) {
cmd->scan_begin_arg &= (CR_EDGE | CR_INVERT);
- err++;
+ err |= -EINVAL;
}
}
- if (cmd->convert_arg != 0) {
- cmd->convert_arg = 0;
- err++;
- }
- if (cmd->scan_end_arg != cmd->chanlist_len) {
- cmd->scan_end_arg = cmd->chanlist_len;
- err++;
- }
+ err |= cfc_check_trigger_arg_is(&cmd->convert_arg, 0);
+ err |= cfc_check_trigger_arg_is(&cmd->scan_end_arg, cmd->chanlist_len);
+
if (cmd->stop_src == TRIG_COUNT) {
/* no limit */
- } else {
- /* TRIG_NONE */
- if (cmd->stop_arg != 0) {
- cmd->stop_arg = 0;
- err++;
- }
+ } else { /* TRIG_NONE */
+ err |= cfc_check_trigger_arg_is(&cmd->stop_arg, 0);
}
if (err)
@@ -793,6 +787,7 @@
static int ni_pcidio_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
{
+ struct nidio96_private *devpriv = dev->private;
struct comedi_cmd *cmd = &s->async->cmd;
/* XXX configure ports for input */
@@ -910,6 +905,7 @@
static int setup_mite_dma(struct comedi_device *dev, struct comedi_subdevice *s)
{
+ struct nidio96_private *devpriv = dev->private;
int retval;
unsigned long flags;
@@ -934,6 +930,8 @@
static int ni_pcidio_inttrig(struct comedi_device *dev,
struct comedi_subdevice *s, unsigned int trignum)
{
+ struct nidio96_private *devpriv = dev->private;
+
if (trignum != 0)
return -EINVAL;
@@ -946,6 +944,8 @@
static int ni_pcidio_cancel(struct comedi_device *dev,
struct comedi_subdevice *s)
{
+ struct nidio96_private *devpriv = dev->private;
+
writeb(0x00,
devpriv->mite->daq_io_addr + Master_DMA_And_Interrupt_Control);
ni_pcidio_release_di_mite_channel(dev);
@@ -956,6 +956,7 @@
static int ni_pcidio_change(struct comedi_device *dev,
struct comedi_subdevice *s, unsigned long new_size)
{
+ struct nidio96_private *devpriv = dev->private;
int ret;
ret = mite_buf_change(devpriv->di_mite_ring, s->async);
@@ -970,6 +971,7 @@
static int pci_6534_load_fpga(struct comedi_device *dev, int fpga_index,
const u8 *data, size_t data_len)
{
+ struct nidio96_private *devpriv = dev->private;
static const int timeout = 1000;
int i;
size_t j;
@@ -1033,8 +1035,10 @@
static int pci_6534_reset_fpgas(struct comedi_device *dev)
{
+ struct nidio96_private *devpriv = dev->private;
int ret;
int i;
+
writew(0x0, devpriv->mite->daq_io_addr + Firmware_Control_Register);
for (i = 0; i < 3; ++i) {
ret = pci_6534_reset_fpga(dev, i);
@@ -1047,6 +1051,8 @@
static void pci_6534_init_main_fpga(struct comedi_device *dev)
{
+ struct nidio96_private *devpriv = dev->private;
+
writel(0, devpriv->mite->daq_io_addr + FPGA_Control1_Register);
writel(0, devpriv->mite->daq_io_addr + FPGA_Control2_Register);
writel(0, devpriv->mite->daq_io_addr + FPGA_SCALS_Counter_Register);
@@ -1057,6 +1063,7 @@
static int pci_6534_upload_firmware(struct comedi_device *dev)
{
+ struct nidio96_private *devpriv = dev->private;
int ret;
const struct firmware *fw;
static const char *const fw_file[3] = {
@@ -1099,16 +1106,20 @@
return NULL;
}
-static int __devinit nidio_attach_pci(struct comedi_device *dev,
- struct pci_dev *pcidev)
+static int nidio_auto_attach(struct comedi_device *dev,
+ unsigned long context_unused)
{
+ struct pci_dev *pcidev = comedi_to_pci_dev(dev);
+ struct nidio96_private *devpriv;
struct comedi_subdevice *s;
int ret;
unsigned int irq;
- ret = alloc_private(dev, sizeof(struct nidio96_private));
- if (ret < 0)
- return ret;
+ devpriv = kzalloc(sizeof(*devpriv), GFP_KERNEL);
+ if (!devpriv)
+ return -ENOMEM;
+ dev->private = devpriv;
+
spin_lock_init(&devpriv->mite_channel_lock);
dev->board_ptr = nidio_find_boardinfo(pcidev);
@@ -1123,7 +1134,7 @@
dev_warn(dev->class_dev, "error setting up mite\n");
return ret;
}
- comedi_set_hw_dev(dev, &devpriv->mite->pcidev->dev);
+
devpriv->di_mite_ring = mite_alloc_ring(devpriv->mite);
if (devpriv->di_mite_ring == NULL)
return -ENOMEM;
@@ -1184,6 +1195,8 @@
static void nidio_detach(struct comedi_device *dev)
{
+ struct nidio96_private *devpriv = dev->private;
+
if (dev->irq)
free_irq(dev->irq, dev);
if (devpriv) {
@@ -1201,17 +1214,17 @@
static struct comedi_driver ni_pcidio_driver = {
.driver_name = "ni_pcidio",
.module = THIS_MODULE,
- .attach_pci = nidio_attach_pci,
+ .auto_attach = nidio_auto_attach,
.detach = nidio_detach,
};
-static int __devinit ni_pcidio_pci_probe(struct pci_dev *dev,
+static int ni_pcidio_pci_probe(struct pci_dev *dev,
const struct pci_device_id *ent)
{
return comedi_pci_auto_config(dev, &ni_pcidio_driver);
}
-static void __devexit ni_pcidio_pci_remove(struct pci_dev *dev)
+static void ni_pcidio_pci_remove(struct pci_dev *dev)
{
comedi_pci_auto_unconfig(dev);
}
@@ -1228,7 +1241,7 @@
.name = "ni_pcidio",
.id_table = ni_pcidio_pci_table,
.probe = ni_pcidio_pci_probe,
- .remove = __devexit_p(ni_pcidio_pci_remove),
+ .remove = ni_pcidio_pci_remove,
};
module_comedi_pci_driver(ni_pcidio_driver, ni_pcidio_pci_driver);
diff --git a/drivers/staging/comedi/drivers/ni_pcimio.c b/drivers/staging/comedi/drivers/ni_pcimio.c
index f284a90..aaac0b2 100644
--- a/drivers/staging/comedi/drivers/ni_pcimio.c
+++ b/drivers/staging/comedi/drivers/ni_pcimio.c
@@ -1190,7 +1190,6 @@
struct ni_private {
NI_PRIVATE_COMMON};
-#define devpriv ((struct ni_private *)dev->private)
/* How we access registers */
@@ -1213,6 +1212,7 @@
static void e_series_win_out(struct comedi_device *dev, uint16_t data, int reg)
{
+ struct ni_private *devpriv = dev->private;
unsigned long flags;
spin_lock_irqsave(&devpriv->window_lock, flags);
@@ -1223,6 +1223,7 @@
static uint16_t e_series_win_in(struct comedi_device *dev, int reg)
{
+ struct ni_private *devpriv = dev->private;
unsigned long flags;
uint16_t ret;
@@ -1237,7 +1238,9 @@
static void m_series_stc_writew(struct comedi_device *dev, uint16_t data,
int reg)
{
+ struct ni_private *devpriv = dev->private;
unsigned offset;
+
switch (reg) {
case ADC_FIFO_Clear:
offset = M_Offset_AI_FIFO_Clear;
@@ -1381,8 +1384,9 @@
/* FIXME: DIO_Output_Register (16 bit reg) is replaced by M_Offset_Static_Digital_Output (32 bit)
and M_Offset_SCXI_Serial_Data_Out (8 bit) */
default:
- printk(KERN_WARNING "%s: bug! unhandled register=0x%x in switch.\n",
- __func__, reg);
+ dev_warn(dev->class_dev,
+ "%s: bug! unhandled register=0x%x in switch.\n",
+ __func__, reg);
BUG();
return;
break;
@@ -1392,7 +1396,9 @@
static uint16_t m_series_stc_readw(struct comedi_device *dev, int reg)
{
+ struct ni_private *devpriv = dev->private;
unsigned offset;
+
switch (reg) {
case AI_Status_1_Register:
offset = M_Offset_AI_Status_1;
@@ -1416,8 +1422,9 @@
offset = M_Offset_G01_Status;
break;
default:
- printk(KERN_WARNING "%s: bug! unhandled register=0x%x in switch.\n",
- __func__, reg);
+ dev_warn(dev->class_dev,
+ "%s: bug! unhandled register=0x%x in switch.\n",
+ __func__, reg);
BUG();
return 0;
break;
@@ -1428,7 +1435,9 @@
static void m_series_stc_writel(struct comedi_device *dev, uint32_t data,
int reg)
{
+ struct ni_private *devpriv = dev->private;
unsigned offset;
+
switch (reg) {
case AI_SC_Load_A_Registers:
offset = M_Offset_AI_SC_Load_A;
@@ -1458,8 +1467,9 @@
offset = M_Offset_G1_Load_B;
break;
default:
- printk(KERN_WARNING "%s: bug! unhandled register=0x%x in switch.\n",
- __func__, reg);
+ dev_warn(dev->class_dev,
+ "%s: bug! unhandled register=0x%x in switch.\n",
+ __func__, reg);
BUG();
return;
break;
@@ -1469,7 +1479,9 @@
static uint32_t m_series_stc_readl(struct comedi_device *dev, int reg)
{
+ struct ni_private *devpriv = dev->private;
unsigned offset;
+
switch (reg) {
case G_HW_Save_Register(0):
offset = M_Offset_G0_HW_Save;
@@ -1484,8 +1496,9 @@
offset = M_Offset_G1_Save;
break;
default:
- printk(KERN_WARNING "%s: bug! unhandled register=0x%x in switch.\n",
- __func__, reg);
+ dev_warn(dev->class_dev,
+ "%s: bug! unhandled register=0x%x in switch.\n",
+ __func__, reg);
BUG();
return 0;
break;
@@ -1516,6 +1529,7 @@
static void m_series_init_eeprom_buffer(struct comedi_device *dev)
{
+ struct ni_private *devpriv = dev->private;
static const int Start_Cal_EEPROM = 0x400;
static const unsigned window_size = 10;
static const int serial_number_eeprom_offset = 0x4;
@@ -1553,6 +1567,8 @@
static void init_6143(struct comedi_device *dev)
{
+ struct ni_private *devpriv = dev->private;
+
/* Disable interrupts */
devpriv->stc_writew(dev, 0, Interrupt_Control_Register);
@@ -1572,10 +1588,12 @@
static void pcimio_detach(struct comedi_device *dev)
{
+ struct ni_private *devpriv = dev->private;
+
mio_common_detach(dev);
if (dev->irq)
free_irq(dev->irq, dev);
- if (dev->private) {
+ if (devpriv) {
mite_free_ring(devpriv->ai_mite_ring);
mite_free_ring(devpriv->ao_mite_ring);
mite_free_ring(devpriv->cdo_mite_ring);
@@ -1602,16 +1620,19 @@
return NULL;
}
-static int __devinit pcimio_attach_pci(struct comedi_device *dev,
- struct pci_dev *pcidev)
+static int pcimio_auto_attach(struct comedi_device *dev,
+ unsigned long context_unused)
{
+ struct pci_dev *pcidev = comedi_to_pci_dev(dev);
+ struct ni_private *devpriv;
int ret;
dev_info(dev->class_dev, "ni_pcimio: attach %s\n", pci_name(pcidev));
ret = ni_alloc_private(dev);
- if (ret < 0)
+ if (ret)
return ret;
+ devpriv = dev->private;
dev->board_ptr = pcimio_find_boardinfo(pcidev);
if (!dev->board_ptr)
@@ -1641,7 +1662,7 @@
pr_warn("error setting up mite\n");
return ret;
}
- comedi_set_hw_dev(dev, &devpriv->mite->pcidev->dev);
+
devpriv->ai_mite_ring = mite_alloc_ring(devpriv->mite);
if (devpriv->ai_mite_ring == NULL)
return -ENOMEM;
@@ -1693,6 +1714,7 @@
static int pcimio_ai_change(struct comedi_device *dev,
struct comedi_subdevice *s, unsigned long new_size)
{
+ struct ni_private *devpriv = dev->private;
int ret;
ret = mite_buf_change(devpriv->ai_mite_ring, s->async);
@@ -1705,6 +1727,7 @@
static int pcimio_ao_change(struct comedi_device *dev,
struct comedi_subdevice *s, unsigned long new_size)
{
+ struct ni_private *devpriv = dev->private;
int ret;
ret = mite_buf_change(devpriv->ao_mite_ring, s->async);
@@ -1718,6 +1741,7 @@
struct comedi_subdevice *s,
unsigned long new_size)
{
+ struct ni_private *devpriv = dev->private;
int ret;
ret = mite_buf_change(devpriv->gpct_mite_ring[0], s->async);
@@ -1731,6 +1755,7 @@
struct comedi_subdevice *s,
unsigned long new_size)
{
+ struct ni_private *devpriv = dev->private;
int ret;
ret = mite_buf_change(devpriv->gpct_mite_ring[1], s->async);
@@ -1743,6 +1768,7 @@
static int pcimio_dio_change(struct comedi_device *dev,
struct comedi_subdevice *s, unsigned long new_size)
{
+ struct ni_private *devpriv = dev->private;
int ret;
ret = mite_buf_change(devpriv->cdo_mite_ring, s->async);
@@ -1755,17 +1781,17 @@
static struct comedi_driver ni_pcimio_driver = {
.driver_name = "ni_pcimio",
.module = THIS_MODULE,
- .attach_pci = pcimio_attach_pci,
+ .auto_attach = pcimio_auto_attach,
.detach = pcimio_detach,
};
-static int __devinit ni_pcimio_pci_probe(struct pci_dev *dev,
+static int ni_pcimio_pci_probe(struct pci_dev *dev,
const struct pci_device_id *ent)
{
return comedi_pci_auto_config(dev, &ni_pcimio_driver);
}
-static void __devexit ni_pcimio_pci_remove(struct pci_dev *dev)
+static void ni_pcimio_pci_remove(struct pci_dev *dev)
{
comedi_pci_auto_unconfig(dev);
}
@@ -1832,7 +1858,7 @@
.name = "ni_pcimio",
.id_table = ni_pcimio_pci_table,
.probe = ni_pcimio_pci_probe,
- .remove = __devexit_p(ni_pcimio_pci_remove)
+ .remove = ni_pcimio_pci_remove
};
module_comedi_pci_driver(ni_pcimio_driver, ni_pcimio_pci_driver);
diff --git a/drivers/staging/comedi/drivers/ni_tio.h b/drivers/staging/comedi/drivers/ni_tio.h
index b058820..8572996 100644
--- a/drivers/staging/comedi/drivers/ni_tio.h
+++ b/drivers/staging/comedi/drivers/ni_tio.h
@@ -120,9 +120,9 @@
struct ni_gpct_device {
struct comedi_device *dev;
- void (*write_register) (struct ni_gpct * counter, unsigned bits,
+ void (*write_register) (struct ni_gpct *counter, unsigned bits,
enum ni_gpct_register reg);
- unsigned (*read_register) (struct ni_gpct * counter,
+ unsigned (*read_register) (struct ni_gpct *counter,
enum ni_gpct_register reg);
enum ni_gpct_variant variant;
struct ni_gpct *counters;
diff --git a/drivers/staging/comedi/drivers/ni_tiocmd.c b/drivers/staging/comedi/drivers/ni_tiocmd.c
index 8ee93d3..0c991b9 100644
--- a/drivers/staging/comedi/drivers/ni_tiocmd.c
+++ b/drivers/staging/comedi/drivers/ni_tiocmd.c
@@ -173,7 +173,8 @@
static int ni_tio_output_cmd(struct ni_gpct *counter,
struct comedi_async *async)
{
- printk(KERN_ERR "ni_tio: output commands not yet implemented.\n");
+ dev_err(counter->counter_dev->dev->class_dev,
+ "output commands not yet implemented.\n");
return -ENOTSUPP;
counter->mite_chan->dir = COMEDI_OUTPUT;
@@ -219,7 +220,10 @@
spin_lock_irqsave(&counter->lock, flags);
if (counter->mite_chan == NULL) {
- printk(KERN_ERR "ni_tio: commands only supported with DMA. Interrupt-driven commands not yet implemented.\n");
+ dev_err(counter->counter_dev->dev->class_dev,
+ "commands only supported with DMA. ");
+ dev_err(counter->counter_dev->dev->class_dev,
+ "Interrupt-driven commands not yet implemented.\n");
retval = -EIO;
} else {
retval = ni_tio_cmd_setup(counter, async);
@@ -271,37 +275,19 @@
if (err)
return 2;
- /* step 3: make sure arguments are trivially compatible */
- if (cmd->start_src != TRIG_EXT) {
- if (cmd->start_arg != 0) {
- cmd->start_arg = 0;
- err++;
- }
- }
- if (cmd->scan_begin_src != TRIG_EXT) {
- if (cmd->scan_begin_arg) {
- cmd->scan_begin_arg = 0;
- err++;
- }
- }
- if (cmd->convert_src != TRIG_EXT) {
- if (cmd->convert_arg) {
- cmd->convert_arg = 0;
- err++;
- }
- }
+ /* Step 3: check if arguments are trivially valid */
- if (cmd->scan_end_arg != cmd->chanlist_len) {
- cmd->scan_end_arg = cmd->chanlist_len;
- err++;
- }
+ if (cmd->start_src != TRIG_EXT)
+ err |= cfc_check_trigger_arg_is(&cmd->start_arg, 0);
- if (cmd->stop_src == TRIG_NONE) {
- if (cmd->stop_arg != 0) {
- cmd->stop_arg = 0;
- err++;
- }
- }
+ if (cmd->scan_begin_src != TRIG_EXT)
+ err |= cfc_check_trigger_arg_is(&cmd->scan_begin_arg, 0);
+
+ if (cmd->convert_src != TRIG_EXT)
+ err |= cfc_check_trigger_arg_is(&cmd->convert_arg, 0);
+
+ err |= cfc_check_trigger_arg_is(&cmd->scan_end_arg, cmd->chanlist_len);
+ err |= cfc_check_trigger_arg_is(&cmd->stop_arg, 0);
if (err)
return 3;
@@ -427,8 +413,9 @@
NITIO_Gxx_Joint_Status2_Reg
(counter->counter_index)) &
Gi_Permanent_Stale_Bit(counter->counter_index)) {
- printk(KERN_INFO "%s: Gi_Permanent_Stale_Data detected.\n",
- __func__);
+ dev_info(counter->counter_dev->dev->class_dev,
+ "%s: Gi_Permanent_Stale_Data detected.\n",
+ __func__);
if (perm_stale_data)
*perm_stale_data = 1;
}
@@ -448,7 +435,8 @@
ni_tio_acknowledge_and_confirm(counter, &gate_error, &tc_error,
&perm_stale_data, NULL);
if (gate_error) {
- printk(KERN_NOTICE "%s: Gi_Gate_Error detected.\n", __func__);
+ dev_notice(counter->counter_dev->dev->class_dev,
+ "%s: Gi_Gate_Error detected.\n", __func__);
s->async->events |= COMEDI_CB_OVERFLOW;
}
if (perm_stale_data)
@@ -459,8 +447,8 @@
if (read_register(counter,
NITIO_Gi_DMA_Status_Reg
(counter->counter_index)) & Gi_DRQ_Error_Bit) {
- printk(KERN_NOTICE "%s: Gi_DRQ_Error detected.\n",
- __func__);
+ dev_notice(counter->counter_dev->dev->class_dev,
+ "%s: Gi_DRQ_Error detected.\n", __func__);
s->async->events |= COMEDI_CB_OVERFLOW;
}
break;
diff --git a/drivers/staging/comedi/drivers/pcl711.c b/drivers/staging/comedi/drivers/pcl711.c
index 89305a1..6ee5da2 100644
--- a/drivers/staging/comedi/drivers/pcl711.c
+++ b/drivers/staging/comedi/drivers/pcl711.c
@@ -161,14 +161,13 @@
unsigned int divisor2;
};
-#define devpriv ((struct pcl711_private *)dev->private)
-
static irqreturn_t pcl711_interrupt(int irq, void *d)
{
int lo, hi;
int data;
struct comedi_device *dev = d;
const struct pcl711_board *board = comedi_board(dev);
+ struct pcl711_private *devpriv = dev->private;
struct comedi_subdevice *s = &dev->subdevices[0];
if (!dev->attached) {
@@ -264,6 +263,7 @@
static int pcl711_ai_cmdtest(struct comedi_device *dev,
struct comedi_subdevice *s, struct comedi_cmd *cmd)
{
+ struct pcl711_private *devpriv = dev->private;
int tmp;
int err = 0;
@@ -289,38 +289,24 @@
if (err)
return 2;
- /* step 3 */
+ /* Step 3: check if arguments are trivially valid */
- if (cmd->start_arg != 0) {
- cmd->start_arg = 0;
- err++;
- }
+ err |= cfc_check_trigger_arg_is(&cmd->start_arg, 0);
+
if (cmd->scan_begin_src == TRIG_EXT) {
- if (cmd->scan_begin_arg != 0) {
- cmd->scan_begin_arg = 0;
- err++;
- }
+ err |= cfc_check_trigger_arg_is(&cmd->scan_begin_arg, 0);
} else {
#define MAX_SPEED 1000
#define TIMER_BASE 100
- if (cmd->scan_begin_arg < MAX_SPEED) {
- cmd->scan_begin_arg = MAX_SPEED;
- err++;
- }
+ err |= cfc_check_trigger_arg_min(&cmd->scan_begin_arg,
+ MAX_SPEED);
}
- if (cmd->convert_arg != 0) {
- cmd->convert_arg = 0;
- err++;
- }
- if (cmd->scan_end_arg != cmd->chanlist_len) {
- cmd->scan_end_arg = cmd->chanlist_len;
- err++;
- }
+
+ err |= cfc_check_trigger_arg_is(&cmd->convert_arg, 0);
+ err |= cfc_check_trigger_arg_is(&cmd->scan_end_arg, cmd->chanlist_len);
+
if (cmd->stop_src == TRIG_NONE) {
- if (cmd->stop_arg != 0) {
- cmd->stop_arg = 0;
- err++;
- }
+ err |= cfc_check_trigger_arg_is(&cmd->stop_arg, 0);
} else {
/* ignore */
}
@@ -349,6 +335,7 @@
static int pcl711_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
{
+ struct pcl711_private *devpriv = dev->private;
int timer1, timer2;
struct comedi_cmd *cmd = &s->async->cmd;
@@ -398,6 +385,7 @@
static int pcl711_ao_insn(struct comedi_device *dev, struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
+ struct pcl711_private *devpriv = dev->private;
int n;
int chan = CR_CHAN(insn->chanspec);
@@ -417,6 +405,7 @@
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
+ struct pcl711_private *devpriv = dev->private;
int n;
int chan = CR_CHAN(insn->chanspec);
@@ -460,6 +449,7 @@
static int pcl711_attach(struct comedi_device *dev, struct comedi_devconfig *it)
{
const struct pcl711_board *board = comedi_board(dev);
+ struct pcl711_private *devpriv;
int ret;
unsigned long iobase;
unsigned int irq;
@@ -499,9 +489,10 @@
if (ret)
return ret;
- ret = alloc_private(dev, sizeof(struct pcl711_private));
- if (ret < 0)
- return ret;
+ devpriv = kzalloc(sizeof(*devpriv), GFP_KERNEL);
+ if (!devpriv)
+ return -ENOMEM;
+ dev->private = devpriv;
s = &dev->subdevices[0];
/* AI subdevice */
diff --git a/drivers/staging/comedi/drivers/pcl726.c b/drivers/staging/comedi/drivers/pcl726.c
index 07e72de..50e0196 100644
--- a/drivers/staging/comedi/drivers/pcl726.c
+++ b/drivers/staging/comedi/drivers/pcl726.c
@@ -152,11 +152,10 @@
unsigned int ao_readback[12];
};
-#define devpriv ((struct pcl726_private *)dev->private)
-
static int pcl726_ao_insn(struct comedi_device *dev, struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
+ struct pcl726_private *devpriv = dev->private;
int hi, lo;
int n;
int chan = CR_CHAN(insn->chanspec);
@@ -183,6 +182,7 @@
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
+ struct pcl726_private *devpriv = dev->private;
int chan = CR_CHAN(insn->chanspec);
int n;
@@ -226,6 +226,7 @@
static int pcl726_attach(struct comedi_device *dev, struct comedi_devconfig *it)
{
const struct pcl726_board *board = comedi_board(dev);
+ struct pcl726_private *devpriv;
struct comedi_subdevice *s;
unsigned long iobase;
unsigned int iorange;
@@ -247,9 +248,10 @@
dev->board_name = board->name;
- ret = alloc_private(dev, sizeof(struct pcl726_private));
- if (ret < 0)
+ devpriv = kzalloc(sizeof(*devpriv), GFP_KERNEL);
+ if (!devpriv)
return -ENOMEM;
+ dev->private = devpriv;
for (i = 0; i < 12; i++) {
devpriv->bipolar[i] = 0;
diff --git a/drivers/staging/comedi/drivers/pcl812.c b/drivers/staging/comedi/drivers/pcl812.c
index 3cf55ff..560930e 100644
--- a/drivers/staging/comedi/drivers/pcl812.c
+++ b/drivers/staging/comedi/drivers/pcl812.c
@@ -369,8 +369,6 @@
unsigned int ao_readback[2]; /* data for AO readback */
};
-#define devpriv ((struct pcl812_private *)dev->private)
-
/*
==============================================================================
*/
@@ -388,6 +386,7 @@
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
+ struct pcl812_private *devpriv = dev->private;
int n;
int timeout, hi;
@@ -465,6 +464,7 @@
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
+ struct pcl812_private *devpriv = dev->private;
int chan = CR_CHAN(insn->chanspec);
int i;
@@ -486,6 +486,7 @@
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
+ struct pcl812_private *devpriv = dev->private;
int chan = CR_CHAN(insn->chanspec);
int i;
@@ -533,6 +534,7 @@
struct comedi_subdevice *s, struct comedi_cmd *cmd)
{
const struct pcl812_board *board = comedi_board(dev);
+ struct pcl812_private *devpriv = dev->private;
int err = 0;
unsigned int flags;
int tmp, divisor1, divisor2;
@@ -563,53 +565,25 @@
if (err)
return 2;
- /* step 3: make sure arguments are trivially compatible */
+ /* Step 3: check if arguments are trivially valid */
- if (cmd->start_arg != 0) {
- cmd->start_arg = 0;
- err++;
- }
+ err |= cfc_check_trigger_arg_is(&cmd->start_arg, 0);
+ err |= cfc_check_trigger_arg_is(&cmd->scan_begin_arg, 0);
- if (cmd->scan_begin_arg != 0) {
- cmd->scan_begin_arg = 0;
- err++;
- }
+ if (cmd->convert_src == TRIG_TIMER)
+ err |= cfc_check_trigger_arg_min(&cmd->convert_arg,
+ board->ai_ns_min);
+ else /* TRIG_EXT */
+ err |= cfc_check_trigger_arg_is(&cmd->convert_arg, 0);
- if (cmd->convert_src == TRIG_TIMER) {
- if (cmd->convert_arg < board->ai_ns_min) {
- cmd->convert_arg = board->ai_ns_min;
- err++;
- }
- } else { /* TRIG_EXT */
- if (cmd->convert_arg != 0) {
- cmd->convert_arg = 0;
- err++;
- }
- }
+ err |= cfc_check_trigger_arg_min(&cmd->chanlist_len, 1);
+ err |= cfc_check_trigger_arg_max(&cmd->chanlist_len, MAX_CHANLIST_LEN);
+ err |= cfc_check_trigger_arg_is(&cmd->scan_end_arg, cmd->chanlist_len);
- if (!cmd->chanlist_len) {
- cmd->chanlist_len = 1;
- err++;
- }
- if (cmd->chanlist_len > MAX_CHANLIST_LEN) {
- cmd->chanlist_len = board->n_aichan;
- err++;
- }
- if (cmd->scan_end_arg != cmd->chanlist_len) {
- cmd->scan_end_arg = cmd->chanlist_len;
- err++;
- }
- if (cmd->stop_src == TRIG_COUNT) {
- if (!cmd->stop_arg) {
- cmd->stop_arg = 1;
- err++;
- }
- } else { /* TRIG_NONE */
- if (cmd->stop_arg != 0) {
- cmd->stop_arg = 0;
- err++;
- }
- }
+ if (cmd->stop_src == TRIG_COUNT)
+ err |= cfc_check_trigger_arg_min(&cmd->stop_arg, 1);
+ else /* TRIG_NONE */
+ err |= cfc_check_trigger_arg_is(&cmd->stop_arg, 0);
if (err)
return 3;
@@ -639,6 +613,7 @@
static int pcl812_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
{
const struct pcl812_board *board = comedi_board(dev);
+ struct pcl812_private *devpriv = dev->private;
unsigned int divisor1 = 0, divisor2 = 0, i, dma_flags, bytes;
struct comedi_cmd *cmd = &s->async->cmd;
@@ -789,6 +764,7 @@
char err = 1;
unsigned int mask, timeout;
struct comedi_device *dev = d;
+ struct pcl812_private *devpriv = dev->private;
struct comedi_subdevice *s = &dev->subdevices[0];
unsigned int next_chan;
@@ -862,6 +838,7 @@
struct comedi_subdevice *s, short *ptr,
unsigned int bufptr, unsigned int len)
{
+ struct pcl812_private *devpriv = dev->private;
unsigned int i;
s->async->events = 0;
@@ -892,6 +869,7 @@
static irqreturn_t interrupt_pcl812_ai_dma(int irq, void *d)
{
struct comedi_device *dev = d;
+ struct pcl812_private *devpriv = dev->private;
struct comedi_subdevice *s = &dev->subdevices[0];
unsigned long dma_flags;
int len, bufptr;
@@ -938,6 +916,7 @@
static irqreturn_t interrupt_pcl812(int irq, void *d)
{
struct comedi_device *dev = d;
+ struct pcl812_private *devpriv = dev->private;
if (!dev->attached) {
comedi_error(dev, "spurious interrupt");
@@ -954,6 +933,7 @@
*/
static int pcl812_ai_poll(struct comedi_device *dev, struct comedi_subdevice *s)
{
+ struct pcl812_private *devpriv = dev->private;
unsigned long flags;
unsigned int top1, top2, i;
@@ -1002,6 +982,7 @@
struct comedi_subdevice *s,
unsigned int rangechan, char wait)
{
+ struct pcl812_private *devpriv = dev->private;
unsigned char chan_reg = CR_CHAN(rangechan); /* normal board */
/* gain index */
unsigned char gain_reg = CR_RANGE(rangechan) +
@@ -1063,8 +1044,9 @@
static void free_resources(struct comedi_device *dev)
{
const struct pcl812_board *board = comedi_board(dev);
+ struct pcl812_private *devpriv = dev->private;
- if (dev->private) {
+ if (devpriv) {
if (devpriv->dmabuf[0])
free_pages(devpriv->dmabuf[0], devpriv->dmapages[0]);
if (devpriv->dmabuf[1])
@@ -1084,6 +1066,8 @@
static int pcl812_ai_cancel(struct comedi_device *dev,
struct comedi_subdevice *s)
{
+ struct pcl812_private *devpriv = dev->private;
+
if (devpriv->ai_dma)
disable_dma(devpriv->dma);
outb(0, dev->iobase + PCL812_CLRINT); /* clear INT request */
@@ -1100,6 +1084,7 @@
static void pcl812_reset(struct comedi_device *dev)
{
const struct pcl812_board *board = comedi_board(dev);
+ struct pcl812_private *devpriv = dev->private;
outb(0, dev->iobase + PCL812_MUX);
outb(0 + devpriv->range_correction, dev->iobase + PCL812_GAIN);
@@ -1135,6 +1120,7 @@
static int pcl812_attach(struct comedi_device *dev, struct comedi_devconfig *it)
{
const struct pcl812_board *board = comedi_board(dev);
+ struct pcl812_private *devpriv;
int ret, subdev;
unsigned long iobase;
unsigned int irq;
@@ -1153,11 +1139,12 @@
}
dev->iobase = iobase;
- ret = alloc_private(dev, sizeof(struct pcl812_private));
- if (ret < 0) {
+ devpriv = kzalloc(sizeof(*devpriv), GFP_KERNEL);
+ if (!devpriv) {
free_resources(dev);
- return ret; /* Can't alloc mem */
+ return -ENOMEM;
}
+ dev->private = devpriv;
dev->board_name = board->name;
diff --git a/drivers/staging/comedi/drivers/pcl816.c b/drivers/staging/comedi/drivers/pcl816.c
index 0822de0..f625fda 100644
--- a/drivers/staging/comedi/drivers/pcl816.c
+++ b/drivers/staging/comedi/drivers/pcl816.c
@@ -126,8 +126,6 @@
int i8254_osc_base; /* 1/frequency of on board oscilator in ns */
};
-#define devpriv ((struct pcl816_private *)dev->private)
-
#ifdef unused
static int RTC_lock; /* RTC lock */
static int RTC_timer_lock; /* RTC int lock */
@@ -259,6 +257,7 @@
static irqreturn_t interrupt_pcl816_ai_mode13_int(int irq, void *d)
{
struct comedi_device *dev = d;
+ struct pcl816_private *devpriv = dev->private;
struct comedi_subdevice *s = &dev->subdevices[0];
int low, hi;
int timeout = 50; /* wait max 50us */
@@ -315,6 +314,7 @@
struct comedi_subdevice *s, short *ptr,
unsigned int bufptr, unsigned int len)
{
+ struct pcl816_private *devpriv = dev->private;
int i;
s->async->events = 0;
@@ -350,6 +350,7 @@
static irqreturn_t interrupt_pcl816_ai_mode13_dma(int irq, void *d)
{
struct comedi_device *dev = d;
+ struct pcl816_private *devpriv = dev->private;
struct comedi_subdevice *s = &dev->subdevices[0];
int len, bufptr, this_dma_buf;
unsigned long dma_flags;
@@ -398,6 +399,8 @@
static irqreturn_t interrupt_pcl816(int irq, void *d)
{
struct comedi_device *dev = d;
+ struct pcl816_private *devpriv = dev->private;
+
DPRINTK("<I>");
if (!dev->attached) {
@@ -481,43 +484,23 @@
return 2;
- /* step 3: make sure arguments are trivially compatible */
- if (cmd->start_arg != 0) {
- cmd->start_arg = 0;
- err++;
- }
+ /* Step 3: check if arguments are trivially valid */
- if (cmd->scan_begin_arg != 0) {
- cmd->scan_begin_arg = 0;
- err++;
- }
- if (cmd->convert_src == TRIG_TIMER) {
- if (cmd->convert_arg < board->ai_ns_min) {
- cmd->convert_arg = board->ai_ns_min;
- err++;
- }
- } else { /* TRIG_EXT */
- if (cmd->convert_arg != 0) {
- cmd->convert_arg = 0;
- err++;
- }
- }
+ err |= cfc_check_trigger_arg_is(&cmd->start_arg, 0);
+ err |= cfc_check_trigger_arg_is(&cmd->scan_begin_arg, 0);
- if (cmd->scan_end_arg != cmd->chanlist_len) {
- cmd->scan_end_arg = cmd->chanlist_len;
- err++;
- }
- if (cmd->stop_src == TRIG_COUNT) {
- if (!cmd->stop_arg) {
- cmd->stop_arg = 1;
- err++;
- }
- } else { /* TRIG_NONE */
- if (cmd->stop_arg != 0) {
- cmd->stop_arg = 0;
- err++;
- }
- }
+ if (cmd->convert_src == TRIG_TIMER)
+ err |= cfc_check_trigger_arg_min(&cmd->convert_arg,
+ board->ai_ns_min);
+ else /* TRIG_EXT */
+ err |= cfc_check_trigger_arg_is(&cmd->convert_arg, 0);
+
+ err |= cfc_check_trigger_arg_is(&cmd->scan_end_arg, cmd->chanlist_len);
+
+ if (cmd->stop_src == TRIG_COUNT)
+ err |= cfc_check_trigger_arg_min(&cmd->stop_arg, 1);
+ else /* TRIG_NONE */
+ err |= cfc_check_trigger_arg_is(&cmd->stop_arg, 0);
if (err)
return 3;
@@ -554,6 +537,7 @@
static int pcl816_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
{
const struct pcl816_board *board = comedi_board(dev);
+ struct pcl816_private *devpriv = dev->private;
unsigned int divisor1 = 0, divisor2 = 0, dma_flags, bytes, dmairq;
struct comedi_cmd *cmd = &s->async->cmd;
unsigned int seglen;
@@ -682,6 +666,7 @@
static int pcl816_ai_poll(struct comedi_device *dev, struct comedi_subdevice *s)
{
+ struct pcl816_private *devpriv = dev->private;
unsigned long flags;
unsigned int top1, top2, i;
@@ -727,6 +712,8 @@
static int pcl816_ai_cancel(struct comedi_device *dev,
struct comedi_subdevice *s)
{
+ struct pcl816_private *devpriv = dev->private;
+
/* DEBUG(printk("pcl816_ai_cancel()\n");) */
if (devpriv->irq_blocked > 0) {
@@ -932,6 +919,7 @@
struct comedi_subdevice *s, unsigned int *chanlist,
unsigned int seglen)
{
+ struct pcl816_private *devpriv = dev->private;
unsigned int i;
devpriv->ai_act_chanlist_len = seglen;
@@ -991,6 +979,7 @@
static int pcl816_attach(struct comedi_device *dev, struct comedi_devconfig *it)
{
const struct pcl816_board *board = comedi_board(dev);
+ struct pcl816_private *devpriv;
int ret;
unsigned long iobase;
unsigned int irq, dma;
@@ -1015,9 +1004,10 @@
return -EIO;
}
- ret = alloc_private(dev, sizeof(struct pcl816_private));
- if (ret < 0)
- return ret; /* Can't alloc mem */
+ devpriv = kzalloc(sizeof(*devpriv), GFP_KERNEL);
+ if (!devpriv)
+ return -ENOMEM;
+ dev->private = devpriv;
dev->board_name = board->name;
@@ -1216,6 +1206,7 @@
static void pcl816_detach(struct comedi_device *dev)
{
const struct pcl816_board *board = comedi_board(dev);
+ struct pcl816_private *devpriv = dev->private;
if (dev->private) {
pcl816_ai_cancel(dev, devpriv->sub_ai);
diff --git a/drivers/staging/comedi/drivers/pcl818.c b/drivers/staging/comedi/drivers/pcl818.c
index d4b0859..06127a5 100644
--- a/drivers/staging/comedi/drivers/pcl818.c
+++ b/drivers/staging/comedi/drivers/pcl818.c
@@ -326,8 +326,6 @@
0x88, 0x99, 0xaa, 0xbb, 0xcc, 0xdd, 0xee, 0xff
};
-#define devpriv ((struct pcl818_private *)dev->private)
-
/*
==============================================================================
*/
@@ -406,6 +404,7 @@
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
+ struct pcl818_private *devpriv = dev->private;
int n;
int chan = CR_CHAN(insn->chanspec);
@@ -419,6 +418,7 @@
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
+ struct pcl818_private *devpriv = dev->private;
int n;
int chan = CR_CHAN(insn->chanspec);
@@ -478,6 +478,7 @@
static irqreturn_t interrupt_pcl818_ai_mode13_int(int irq, void *d)
{
struct comedi_device *dev = d;
+ struct pcl818_private *devpriv = dev->private;
struct comedi_subdevice *s = &dev->subdevices[0];
int low;
int timeout = 50; /* wait max 50us */
@@ -537,6 +538,7 @@
static irqreturn_t interrupt_pcl818_ai_mode13_dma(int irq, void *d)
{
struct comedi_device *dev = d;
+ struct pcl818_private *devpriv = dev->private;
struct comedi_subdevice *s = &dev->subdevices[0];
int i, len, bufptr;
unsigned long flags;
@@ -616,6 +618,7 @@
static irqreturn_t interrupt_pcl818_ai_mode13_dma_rtc(int irq, void *d)
{
struct comedi_device *dev = d;
+ struct pcl818_private *devpriv = dev->private;
struct comedi_subdevice *s = &dev->subdevices[0];
unsigned long tmp;
unsigned int top1, top2, i, bufptr;
@@ -721,6 +724,7 @@
static irqreturn_t interrupt_pcl818_ai_mode13_fifo(int irq, void *d)
{
struct comedi_device *dev = d;
+ struct pcl818_private *devpriv = dev->private;
struct comedi_subdevice *s = &dev->subdevices[0];
int i, len, lo;
@@ -795,6 +799,7 @@
static irqreturn_t interrupt_pcl818(int irq, void *d)
{
struct comedi_device *dev = d;
+ struct pcl818_private *devpriv = dev->private;
if (!dev->attached) {
comedi_error(dev, "premature interrupt");
@@ -861,6 +866,7 @@
static void pcl818_ai_mode13dma_int(int mode, struct comedi_device *dev,
struct comedi_subdevice *s)
{
+ struct pcl818_private *devpriv = dev->private;
unsigned int flags;
unsigned int bytes;
@@ -902,6 +908,7 @@
static void pcl818_ai_mode13dma_rtc(int mode, struct comedi_device *dev,
struct comedi_subdevice *s)
{
+ struct pcl818_private *devpriv = dev->private;
unsigned int flags;
short *pole;
@@ -943,6 +950,7 @@
static int pcl818_ai_cmd_mode(int mode, struct comedi_device *dev,
struct comedi_subdevice *s)
{
+ struct pcl818_private *devpriv = dev->private;
struct comedi_cmd *cmd = &s->async->cmd;
int divisor1 = 0, divisor2 = 0;
unsigned int seglen;
@@ -1063,6 +1071,7 @@
static int pcl818_ao_mode13(int mode, struct comedi_device *dev,
struct comedi_subdevice *s, comedi_trig * it)
{
+ struct pcl818_private *devpriv = dev->private;
int divisor1 = 0, divisor2 = 0;
if (!dev->irq) {
@@ -1222,6 +1231,7 @@
unsigned int *chanlist, unsigned int n_chan,
unsigned int seglen)
{
+ struct pcl818_private *devpriv = dev->private;
int i;
devpriv->act_chanlist_len = seglen;
@@ -1259,6 +1269,7 @@
struct comedi_cmd *cmd)
{
const struct pcl818_board *board = comedi_board(dev);
+ struct pcl818_private *devpriv = dev->private;
int err = 0;
int tmp, divisor1 = 0, divisor2 = 0;
@@ -1283,45 +1294,23 @@
if (err)
return 2;
- /* step 3: make sure arguments are trivially compatible */
+ /* Step 3: check if arguments are trivially valid */
- if (cmd->start_arg != 0) {
- cmd->start_arg = 0;
- err++;
- }
+ err |= cfc_check_trigger_arg_is(&cmd->start_arg, 0);
+ err |= cfc_check_trigger_arg_is(&cmd->scan_begin_arg, 0);
- if (cmd->scan_begin_arg != 0) {
- cmd->scan_begin_arg = 0;
- err++;
- }
+ if (cmd->convert_src == TRIG_TIMER)
+ err |= cfc_check_trigger_arg_min(&cmd->convert_arg,
+ board->ns_min);
+ else /* TRIG_EXT */
+ err |= cfc_check_trigger_arg_is(&cmd->convert_arg, 0);
- if (cmd->convert_src == TRIG_TIMER) {
- if (cmd->convert_arg < board->ns_min) {
- cmd->convert_arg = board->ns_min;
- err++;
- }
- } else { /* TRIG_EXT */
- if (cmd->convert_arg != 0) {
- cmd->convert_arg = 0;
- err++;
- }
- }
+ err |= cfc_check_trigger_arg_is(&cmd->scan_end_arg, cmd->chanlist_len);
- if (cmd->scan_end_arg != cmd->chanlist_len) {
- cmd->scan_end_arg = cmd->chanlist_len;
- err++;
- }
- if (cmd->stop_src == TRIG_COUNT) {
- if (!cmd->stop_arg) {
- cmd->stop_arg = 1;
- err++;
- }
- } else { /* TRIG_NONE */
- if (cmd->stop_arg != 0) {
- cmd->stop_arg = 0;
- err++;
- }
- }
+ if (cmd->stop_src == TRIG_COUNT)
+ err |= cfc_check_trigger_arg_min(&cmd->stop_arg, 1);
+ else /* TRIG_NONE */
+ err |= cfc_check_trigger_arg_is(&cmd->stop_arg, 0);
if (err)
return 3;
@@ -1358,6 +1347,7 @@
*/
static int ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
{
+ struct pcl818_private *devpriv = dev->private;
struct comedi_cmd *cmd = &s->async->cmd;
int retval;
@@ -1397,6 +1387,8 @@
static int pcl818_ai_cancel(struct comedi_device *dev,
struct comedi_subdevice *s)
{
+ struct pcl818_private *devpriv = dev->private;
+
if (devpriv->irq_blocked > 0) {
dev_dbg(dev->class_dev, "pcl818_ai_cancel()\n");
devpriv->irq_was_now_closed = 1;
@@ -1482,6 +1474,7 @@
static void pcl818_reset(struct comedi_device *dev)
{
const struct pcl818_board *board = comedi_board(dev);
+ struct pcl818_private *devpriv = dev->private;
if (devpriv->usefifo) { /* FIFO shutdown */
outb(0, dev->iobase + PCL818_FI_INTCLR);
@@ -1552,6 +1545,7 @@
static void rtc_dropped_irq(unsigned long data)
{
struct comedi_device *dev = (void *)data;
+ struct pcl818_private *devpriv = dev->private;
unsigned long flags, tmp;
switch (devpriv->int818_mode) {
@@ -1601,6 +1595,7 @@
static int pcl818_attach(struct comedi_device *dev, struct comedi_devconfig *it)
{
const struct pcl818_board *board = comedi_board(dev);
+ struct pcl818_private *devpriv;
int ret;
unsigned long iobase;
unsigned int irq;
@@ -1608,9 +1603,10 @@
unsigned long pages;
struct comedi_subdevice *s;
- ret = alloc_private(dev, sizeof(struct pcl818_private));
- if (ret < 0)
- return ret; /* Can't alloc mem */
+ devpriv = kzalloc(sizeof(*devpriv), GFP_KERNEL);
+ if (!devpriv)
+ return -ENOMEM;
+ dev->private = devpriv;
/* claim our I/O space */
iobase = it->options[0];
@@ -1892,7 +1888,9 @@
static void pcl818_detach(struct comedi_device *dev)
{
- if (dev->private) {
+ struct pcl818_private *devpriv = dev->private;
+
+ if (devpriv) {
pcl818_ai_cancel(dev, devpriv->sub_ai);
pcl818_reset(dev);
if (devpriv->dma)
diff --git a/drivers/staging/comedi/drivers/pcm3724.c b/drivers/staging/comedi/drivers/pcm3724.c
index 4102547..5f062df 100644
--- a/drivers/staging/comedi/drivers/pcm3724.c
+++ b/drivers/staging/comedi/drivers/pcm3724.c
@@ -62,14 +62,6 @@
#define CR_A_MODE(a) ((a)<<5)
#define CR_CW 0x80
-struct pcm3724_board {
- const char *name; /* driver name */
- int dio; /* num of DIO */
- int numofports; /* num of 8255 subdevices */
- unsigned int IRQbits; /* allowed interrupts */
- unsigned int io_range; /* len of IO space */
-};
-
/* used to track configured dios */
struct priv_pcm3724 {
int dio_1;
@@ -156,13 +148,12 @@
static void enable_chan(struct comedi_device *dev, struct comedi_subdevice *s,
int chanspec)
{
+ struct priv_pcm3724 *priv = dev->private;
struct comedi_subdevice *s_dio1 = &dev->subdevices[0];
unsigned int mask;
int gatecfg;
- struct priv_pcm3724 *priv;
gatecfg = 0;
- priv = dev->private;
mask = 1 << CR_CHAN(chanspec);
if (s == s_dio1)
@@ -233,36 +224,33 @@
static int pcm3724_attach(struct comedi_device *dev,
struct comedi_devconfig *it)
{
- const struct pcm3724_board *board = comedi_board(dev);
+ struct priv_pcm3724 *priv;
struct comedi_subdevice *s;
unsigned long iobase;
unsigned int iorange;
- int ret, i, n_subdevices;
+ int ret, i;
+
+ dev->board_name = dev->driver->driver_name;
iobase = it->options[0];
- iorange = board->io_range;
+ iorange = PCM3724_SIZE;
- ret = alloc_private(dev, sizeof(struct priv_pcm3724));
- if (ret < 0)
+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+ if (!priv)
return -ENOMEM;
-
- ((struct priv_pcm3724 *)(dev->private))->dio_1 = 0;
- ((struct priv_pcm3724 *)(dev->private))->dio_2 = 0;
+ dev->private = priv;
printk(KERN_INFO "comedi%d: pcm3724: board=%s, 0x%03lx ", dev->minor,
- board->name, iobase);
+ dev->board_name, iobase);
if (!iobase || !request_region(iobase, iorange, "pcm3724")) {
printk("I/O port conflict\n");
return -EIO;
}
dev->iobase = iobase;
- dev->board_name = board->name;
printk(KERN_INFO "\n");
- n_subdevices = board->numofports;
-
- ret = comedi_alloc_subdevices(dev, n_subdevices);
+ ret = comedi_alloc_subdevices(dev, 2);
if (ret)
return ret;
@@ -277,7 +265,6 @@
static void pcm3724_detach(struct comedi_device *dev)
{
- const struct pcm3724_board *board = comedi_board(dev);
struct comedi_subdevice *s;
int i;
@@ -288,21 +275,14 @@
}
}
if (dev->iobase)
- release_region(dev->iobase, board->io_range);
+ release_region(dev->iobase, PCM3724_SIZE);
}
-static const struct pcm3724_board boardtypes[] = {
- { "pcm3724", 48, 2, 0x00fc, PCM3724_SIZE, },
-};
-
static struct comedi_driver pcm3724_driver = {
.driver_name = "pcm3724",
.module = THIS_MODULE,
.attach = pcm3724_attach,
.detach = pcm3724_detach,
- .board_name = &boardtypes[0].name,
- .num_names = ARRAY_SIZE(boardtypes),
- .offset = sizeof(struct pcm3724_board),
};
module_comedi_driver(pcm3724_driver);
diff --git a/drivers/staging/comedi/drivers/pcm_common.c b/drivers/staging/comedi/drivers/pcm_common.c
index 85ee05e..8a718ae 100644
--- a/drivers/staging/comedi/drivers/pcm_common.c
+++ b/drivers/staging/comedi/drivers/pcm_common.c
@@ -29,41 +29,19 @@
if (err)
return 2;
- /* step 3: make sure arguments are trivially compatible */
+ /* Step 3: check if arguments are trivially valid */
- /* cmd->start_src == TRIG_NOW || cmd->start_src == TRIG_INT */
- if (cmd->start_arg != 0) {
- cmd->start_arg = 0;
- err++;
- }
-
- /* cmd->scan_begin_src == TRIG_EXT */
- if (cmd->scan_begin_arg != 0) {
- cmd->scan_begin_arg = 0;
- err++;
- }
-
- /* cmd->convert_src == TRIG_NOW */
- if (cmd->convert_arg != 0) {
- cmd->convert_arg = 0;
- err++;
- }
-
- /* cmd->scan_end_src == TRIG_COUNT */
- if (cmd->scan_end_arg != cmd->chanlist_len) {
- cmd->scan_end_arg = cmd->chanlist_len;
- err++;
- }
+ err |= cfc_check_trigger_arg_is(&cmd->start_arg, 0);
+ err |= cfc_check_trigger_arg_is(&cmd->scan_begin_arg, 0);
+ err |= cfc_check_trigger_arg_is(&cmd->convert_arg, 0);
+ err |= cfc_check_trigger_arg_is(&cmd->scan_end_arg, cmd->chanlist_len);
switch (cmd->stop_src) {
case TRIG_COUNT:
/* any count allowed */
break;
case TRIG_NONE:
- if (cmd->stop_arg != 0) {
- cmd->stop_arg = 0;
- err++;
- }
+ err |= cfc_check_trigger_arg_is(&cmd->stop_arg, 0);
break;
default:
break;
diff --git a/drivers/staging/comedi/drivers/pcmad.c b/drivers/staging/comedi/drivers/pcmad.c
index 5efeb92..13e8421 100644
--- a/drivers/staging/comedi/drivers/pcmad.c
+++ b/drivers/staging/comedi/drivers/pcmad.c
@@ -62,7 +62,6 @@
int differential;
int twos_comp;
};
-#define devpriv ((struct pcmad_priv_struct *)dev->private)
#define TIMEOUT 100
@@ -71,6 +70,7 @@
struct comedi_insn *insn, unsigned int *data)
{
const struct pcmad_board_struct *board = comedi_board(dev);
+ struct pcmad_priv_struct *devpriv = dev->private;
int i;
int chan;
int n;
@@ -104,6 +104,7 @@
static int pcmad_attach(struct comedi_device *dev, struct comedi_devconfig *it)
{
const struct pcmad_board_struct *board = comedi_board(dev);
+ struct pcmad_priv_struct *devpriv;
int ret;
struct comedi_subdevice *s;
unsigned long iobase;
@@ -121,9 +122,10 @@
if (ret)
return ret;
- ret = alloc_private(dev, sizeof(struct pcmad_priv_struct));
- if (ret < 0)
- return ret;
+ devpriv = kzalloc(sizeof(*devpriv), GFP_KERNEL);
+ if (!devpriv)
+ return -ENOMEM;
+ dev->private = devpriv;
dev->board_name = board->name;
diff --git a/drivers/staging/comedi/drivers/pcmda12.c b/drivers/staging/comedi/drivers/pcmda12.c
index 28af8f6..0882daf 100644
--- a/drivers/staging/comedi/drivers/pcmda12.c
+++ b/drivers/staging/comedi/drivers/pcmda12.c
@@ -64,13 +64,6 @@
#define MSB_PORT(chan) (LSB_PORT(chan)+1)
#define BITS 12
-/*
- * Bords
- */
-struct pcmda12_board {
- const char *name;
-};
-
/* note these have no effect and are merely here for reference..
these are configured by jumpering the board! */
static const struct comedi_lrange pcmda12_ranges = {
@@ -86,8 +79,6 @@
int simultaneous_xfer_mode;
};
-#define devpriv ((struct pcmda12_private *)(dev->private))
-
static void zero_chans(struct comedi_device *dev)
{ /* sets up an
ASIC chip to defaults */
@@ -104,6 +95,7 @@
static int ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
+ struct pcmda12_private *devpriv = dev->private;
int i;
int chan = CR_CHAN(insn->chanspec);
@@ -146,6 +138,7 @@
static int ao_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
+ struct pcmda12_private *devpriv = dev->private;
int i;
int chan = CR_CHAN(insn->chanspec);
@@ -162,7 +155,7 @@
static int pcmda12_attach(struct comedi_device *dev,
struct comedi_devconfig *it)
{
- const struct pcmda12_board *board = comedi_board(dev);
+ struct pcmda12_private *devpriv;
struct comedi_subdevice *s;
unsigned long iobase;
int ret;
@@ -178,16 +171,12 @@
}
dev->iobase = iobase;
- dev->board_name = board->name;
+ dev->board_name = dev->driver->driver_name;
-/*
- * Allocate the private structure area. alloc_private() is a
- * convenient macro defined in comedidev.h.
- */
- if (alloc_private(dev, sizeof(struct pcmda12_private)) < 0) {
- printk(KERN_ERR "cannot allocate private data structure\n");
+ devpriv = kzalloc(sizeof(*devpriv), GFP_KERNEL);
+ if (!devpriv)
return -ENOMEM;
- }
+ dev->private = devpriv;
devpriv->simultaneous_xfer_mode = it->options[1];
@@ -218,20 +207,11 @@
release_region(dev->iobase, IOSIZE);
}
-static const struct pcmda12_board pcmda12_boards[] = {
- {
- .name = "pcmda12",
- },
-};
-
static struct comedi_driver pcmda12_driver = {
.driver_name = "pcmda12",
.module = THIS_MODULE,
.attach = pcmda12_attach,
.detach = pcmda12_detach,
- .board_name = &pcmda12_boards[0].name,
- .offset = sizeof(struct pcmda12_board),
- .num_names = ARRAY_SIZE(pcmda12_boards),
};
module_comedi_driver(pcmda12_driver);
diff --git a/drivers/staging/comedi/drivers/pcmmio.c b/drivers/staging/comedi/drivers/pcmmio.c
index a10bf0a..7522bfb 100644
--- a/drivers/staging/comedi/drivers/pcmmio.c
+++ b/drivers/staging/comedi/drivers/pcmmio.c
@@ -145,35 +145,6 @@
#define PAGE_ENAB 2
#define PAGE_INT_ID 3
-/*
- * Board descriptions for two imaginary boards. Describing the
- * boards in this way is optional, and completely driver-dependent.
- * Some drivers use arrays such as this, other do not.
- */
-struct pcmmio_board {
- const char *name;
- const int dio_num_asics;
- const int dio_num_ports;
- const int total_iosize;
- const int ai_bits;
- const int ao_bits;
- const int n_ai_chans;
- const int n_ao_chans;
- const struct comedi_lrange *ai_range_table, *ao_range_table;
- int (*ai_rinsn) (struct comedi_device *dev,
- struct comedi_subdevice *s,
- struct comedi_insn *insn,
- unsigned int *data);
- int (*ao_rinsn) (struct comedi_device *dev,
- struct comedi_subdevice *s,
- struct comedi_insn *insn,
- unsigned int *data);
- int (*ao_winsn) (struct comedi_device *dev,
- struct comedi_subdevice *s,
- struct comedi_insn *insn,
- unsigned int *data);
-};
-
static const struct comedi_lrange ranges_ai = {
4, {RANGE(-5., 5.), RANGE(-10., 10.), RANGE(0., 5.), RANGE(0., 10.)}
};
@@ -258,11 +229,6 @@
struct pcmmio_subdev_private *sprivs;
};
-/*
- * most drivers define the following macro to make it easy to
- * access the private structure.
- */
-#define devpriv ((struct pcmmio_private *)dev->private)
#define subpriv ((struct pcmmio_subdev_private *)s->private)
/* DIO devices are slightly special. Although it is possible to
@@ -416,9 +382,9 @@
static void switch_page(struct comedi_device *dev, int asic, int page)
{
- const struct pcmmio_board *board = comedi_board(dev);
+ struct pcmmio_private *devpriv = dev->private;
- if (asic < 0 || asic >= board->dio_num_asics)
+ if (asic < 0 || asic >= 1)
return; /* paranoia */
if (page < 0 || page >= NUM_PAGES)
return; /* more paranoia */
@@ -434,10 +400,10 @@
static void init_asics(struct comedi_device *dev)
{ /* sets up an
ASIC chip to defaults */
- const struct pcmmio_board *board = comedi_board(dev);
+ struct pcmmio_private *devpriv = dev->private;
int asic;
- for (asic = 0; asic < board->dio_num_asics; ++asic) {
+ for (asic = 0; asic < 1; ++asic) {
int port, page;
unsigned long baseaddr = devpriv->asics[asic].iobase;
@@ -472,9 +438,9 @@
#ifdef notused
static void lock_port(struct comedi_device *dev, int asic, int port)
{
- const struct pcmmio_board *board = comedi_board(dev);
+ struct pcmmio_private *devpriv = dev->private;
- if (asic < 0 || asic >= board->dio_num_asics)
+ if (asic < 0 || asic >= 1)
return; /* paranoia */
if (port < 0 || port >= PORTS_PER_ASIC)
return; /* more paranoia */
@@ -488,9 +454,9 @@
static void unlock_port(struct comedi_device *dev, int asic, int port)
{
- const struct pcmmio_board *board = comedi_board(dev);
+ struct pcmmio_private *devpriv = dev->private;
- if (asic < 0 || asic >= board->dio_num_asics)
+ if (asic < 0 || asic >= 1)
return; /* paranoia */
if (port < 0 || port >= PORTS_PER_ASIC)
return; /* more paranoia */
@@ -504,6 +470,7 @@
static void pcmmio_stop_intr(struct comedi_device *dev,
struct comedi_subdevice *s)
{
+ struct pcmmio_private *devpriv = dev->private;
int nports, firstport, asic, port;
asic = subpriv->dio.intr.asic;
@@ -526,6 +493,7 @@
{
int asic, got1 = 0;
struct comedi_device *dev = (struct comedi_device *)d;
+ struct pcmmio_private *devpriv = dev->private;
int i;
for (asic = 0; asic < MAX_ASICS; ++asic) {
@@ -685,6 +653,8 @@
static int pcmmio_start_intr(struct comedi_device *dev,
struct comedi_subdevice *s)
{
+ struct pcmmio_private *devpriv = dev->private;
+
if (!subpriv->dio.intr.continuous && subpriv->dio.intr.stop_count == 0) {
/* An empty acquisition! */
s->async->events |= COMEDI_CB_EOA;
@@ -1012,7 +982,7 @@
static int pcmmio_attach(struct comedi_device *dev, struct comedi_devconfig *it)
{
- const struct pcmmio_board *board = comedi_board(dev);
+ struct pcmmio_private *devpriv;
struct comedi_subdevice *s;
int sdev_no, chans_left, n_dio_subdevs, n_subdevs, port, asic,
thisasic_chanct = 0;
@@ -1020,32 +990,25 @@
unsigned int irq[MAX_ASICS];
int ret;
+ dev->board_name = dev->driver->driver_name;
+
iobase = it->options[0];
irq[0] = it->options[1];
printk(KERN_INFO "comedi%d: %s: io: %lx attaching...\n", dev->minor,
- dev->driver->driver_name, iobase);
+ dev->board_name, iobase);
dev->iobase = iobase;
- if (!iobase || !request_region(iobase,
- board->total_iosize,
- dev->driver->driver_name)) {
+ if (!iobase || !request_region(iobase, 32, dev->board_name)) {
printk(KERN_ERR "comedi%d: I/O port conflict\n", dev->minor);
return -EIO;
}
- dev->board_name = board->name;
-
-/*
- * Allocate the private structure area. alloc_private() is a
- * convenient macro defined in comedidev.h.
- */
- if (alloc_private(dev, sizeof(struct pcmmio_private)) < 0) {
- printk(KERN_ERR "comedi%d: cannot allocate private data structure\n",
- dev->minor);
+ devpriv = kzalloc(sizeof(*devpriv), GFP_KERNEL);
+ if (!devpriv)
return -ENOMEM;
- }
+ dev->private = devpriv;
for (asic = 0; asic < MAX_ASICS; ++asic) {
devpriv->asics[asic].num = asic;
@@ -1059,7 +1022,7 @@
spin_lock_init(&devpriv->asics[asic].spinlock);
}
- chans_left = CHANS_PER_ASIC * board->dio_num_asics;
+ chans_left = CHANS_PER_ASIC * 1;
n_dio_subdevs = CALC_N_DIO_SUBDEVS(chans_left);
n_subdevs = n_dio_subdevs + 2;
devpriv->sprivs =
@@ -1078,13 +1041,13 @@
/* First, AI */
s = &dev->subdevices[0];
s->private = &devpriv->sprivs[0];
- s->maxdata = (1 << board->ai_bits) - 1;
- s->range_table = board->ai_range_table;
+ s->maxdata = 0xffff;
+ s->range_table = &ranges_ai;
s->subdev_flags = SDF_READABLE | SDF_GROUND | SDF_DIFF;
s->type = COMEDI_SUBD_AI;
- s->n_chan = board->n_ai_chans;
+ s->n_chan = 16;
s->len_chanlist = s->n_chan;
- s->insn_read = board->ai_rinsn;
+ s->insn_read = ai_rinsn;
subpriv->iobase = dev->iobase + 0;
/* initialize the resource enable register by clearing it */
outb(0, subpriv->iobase + 3);
@@ -1093,14 +1056,14 @@
/* Next, AO */
s = &dev->subdevices[1];
s->private = &devpriv->sprivs[1];
- s->maxdata = (1 << board->ao_bits) - 1;
- s->range_table = board->ao_range_table;
+ s->maxdata = 0xffff;
+ s->range_table = &ranges_ao;
s->subdev_flags = SDF_READABLE;
s->type = COMEDI_SUBD_AO;
- s->n_chan = board->n_ao_chans;
+ s->n_chan = 8;
s->len_chanlist = s->n_chan;
- s->insn_read = board->ao_rinsn;
- s->insn_write = board->ao_winsn;
+ s->insn_read = ao_rinsn;
+ s->insn_write = ao_winsn;
subpriv->iobase = dev->iobase + 8;
/* initialize the resource enable register by clearing it */
outb(0, subpriv->iobase + 3);
@@ -1180,7 +1143,7 @@
for (asic = 0; irq[0] && asic < MAX_ASICS; ++asic) {
if (irq[asic]
&& request_irq(irq[asic], interrupt_pcmmio,
- IRQF_SHARED, board->name, dev)) {
+ IRQF_SHARED, dev->board_name, dev)) {
int i;
/* unroll the allocated irqs.. */
for (i = asic - 1; i >= 0; --i) {
@@ -1204,11 +1167,11 @@
static void pcmmio_detach(struct comedi_device *dev)
{
- const struct pcmmio_board *board = comedi_board(dev);
+ struct pcmmio_private *devpriv = dev->private;
int i;
if (dev->iobase)
- release_region(dev->iobase, board->total_iosize);
+ release_region(dev->iobase, 32);
for (i = 0; i < MAX_ASICS; ++i) {
if (devpriv && devpriv->asics[i].irq)
free_irq(devpriv->asics[i].irq, dev);
@@ -1217,32 +1180,11 @@
kfree(devpriv->sprivs);
}
-static const struct pcmmio_board pcmmio_boards[] = {
- {
- .name = "pcmmio",
- .dio_num_asics = 1,
- .dio_num_ports = 6,
- .total_iosize = 32,
- .ai_bits = 16,
- .ao_bits = 16,
- .n_ai_chans = 16,
- .n_ao_chans = 8,
- .ai_range_table = &ranges_ai,
- .ao_range_table = &ranges_ao,
- .ai_rinsn = ai_rinsn,
- .ao_rinsn = ao_rinsn,
- .ao_winsn = ao_winsn
- },
-};
-
static struct comedi_driver pcmmio_driver = {
.driver_name = "pcmmio",
.module = THIS_MODULE,
.attach = pcmmio_attach,
.detach = pcmmio_detach,
- .board_name = &pcmmio_boards[0].name,
- .offset = sizeof(struct pcmmio_board),
- .num_names = ARRAY_SIZE(pcmmio_boards),
};
module_comedi_driver(pcmmio_driver);
diff --git a/drivers/staging/comedi/drivers/pcmuio.c b/drivers/staging/comedi/drivers/pcmuio.c
index 0e32119..31ea20c 100644
--- a/drivers/staging/comedi/drivers/pcmuio.c
+++ b/drivers/staging/comedi/drivers/pcmuio.c
@@ -194,11 +194,6 @@
struct pcmuio_subdev_private *sprivs;
};
-/*
- * most drivers define the following macro to make it easy to
- * access the private structure.
- */
-#define devpriv ((struct pcmuio_private *)dev->private)
#define subpriv ((struct pcmuio_subdev_private *)s->private)
/* DIO devices are slightly special. Although it is possible to
@@ -348,6 +343,7 @@
static void switch_page(struct comedi_device *dev, int asic, int page)
{
const struct pcmuio_board *board = comedi_board(dev);
+ struct pcmuio_private *devpriv = dev->private;
if (asic < 0 || asic >= board->num_asics)
return; /* paranoia */
@@ -404,6 +400,7 @@
static void lock_port(struct comedi_device *dev, int asic, int port)
{
const struct pcmuio_board *board = comedi_board(dev);
+ struct pcmuio_private *devpriv = dev->private;
if (asic < 0 || asic >= board->num_asics)
return; /* paranoia */
@@ -419,6 +416,7 @@
static void unlock_port(struct comedi_device *dev, int asic, int port)
{
const struct pcmuio_board *board = comedi_board(dev);
+ struct pcmuio_private *devpriv = dev->private;
if (asic < 0 || asic >= board->num_asics)
return; /* paranoia */
@@ -435,6 +433,7 @@
struct comedi_subdevice *s)
{
int nports, firstport, asic, port;
+ struct pcmuio_private *devpriv = dev->private;
asic = subpriv->intr.asic;
if (asic < 0)
@@ -456,6 +455,7 @@
{
int asic, got1 = 0;
struct comedi_device *dev = (struct comedi_device *)d;
+ struct pcmuio_private *devpriv = dev->private;
int i;
for (asic = 0; asic < MAX_ASICS; ++asic) {
@@ -607,6 +607,8 @@
static int pcmuio_start_intr(struct comedi_device *dev,
struct comedi_subdevice *s)
{
+ struct pcmuio_private *devpriv = dev->private;
+
if (!subpriv->intr.continuous && subpriv->intr.stop_count == 0) {
/* An empty acquisition! */
s->async->events |= COMEDI_CB_EOA;
@@ -748,6 +750,7 @@
static int pcmuio_attach(struct comedi_device *dev, struct comedi_devconfig *it)
{
const struct pcmuio_board *board = comedi_board(dev);
+ struct pcmuio_private *devpriv;
struct comedi_subdevice *s;
int sdev_no, chans_left, n_subdevs, port, asic, thisasic_chanct = 0;
unsigned long iobase;
@@ -772,15 +775,10 @@
dev->board_name = board->name;
-/*
- * Allocate the private structure area. alloc_private() is a
- * convenient macro defined in comedidev.h.
- */
- if (alloc_private(dev, sizeof(struct pcmuio_private)) < 0) {
- dev_warn(dev->class_dev,
- "cannot allocate private data structure\n");
+ devpriv = kzalloc(sizeof(*devpriv), GFP_KERNEL);
+ if (!devpriv)
return -ENOMEM;
- }
+ dev->private = devpriv;
for (asic = 0; asic < MAX_ASICS; ++asic) {
devpriv->asics[asic].num = asic;
@@ -905,6 +903,7 @@
static void pcmuio_detach(struct comedi_device *dev)
{
const struct pcmuio_board *board = comedi_board(dev);
+ struct pcmuio_private *devpriv = dev->private;
int i;
if (dev->iobase)
diff --git a/drivers/staging/comedi/drivers/poc.c b/drivers/staging/comedi/drivers/poc.c
index 78dfe16..d7842c9 100644
--- a/drivers/staging/comedi/drivers/poc.c
+++ b/drivers/staging/comedi/drivers/poc.c
@@ -57,13 +57,18 @@
const struct comedi_lrange *range;
};
+struct poc_private {
+ unsigned int ao_readback[32];
+};
+
static int readback_insn(struct comedi_device *dev, struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
+ struct poc_private *devpriv = dev->private;
int chan;
chan = CR_CHAN(insn->chanspec);
- data[0] = ((unsigned int *)dev->private)[chan];
+ data[0] = devpriv->ao_readback[chan];
return 1;
}
@@ -75,12 +80,13 @@
static int dac02_ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
+ struct poc_private *devpriv = dev->private;
int temp;
int chan;
int output;
chan = CR_CHAN(insn->chanspec);
- ((unsigned int *)dev->private)[chan] = data[0];
+ devpriv->ao_readback[chan] = data[0];
output = data[0];
#ifdef wrong
/* convert to complementary binary if range is bipolar */
@@ -131,6 +137,7 @@
static int poc_attach(struct comedi_device *dev, struct comedi_devconfig *it)
{
const struct boarddef_struct *board = comedi_board(dev);
+ struct poc_private *devpriv;
struct comedi_subdevice *s;
unsigned long iobase;
unsigned int iosize;
@@ -160,8 +167,10 @@
if (ret)
return ret;
- if (alloc_private(dev, sizeof(unsigned int) * board->n_chan) < 0)
+ devpriv = kzalloc(sizeof(*devpriv), GFP_KERNEL);
+ if (!devpriv)
return -ENOMEM;
+ dev->private = devpriv;
/* analog output subdevice */
s = &dev->subdevices[0];
diff --git a/drivers/staging/comedi/drivers/quatech_daqp_cs.c b/drivers/staging/comedi/drivers/quatech_daqp_cs.c
index 3e276f7..ef0cdaa 100644
--- a/drivers/staging/comedi/drivers/quatech_daqp_cs.c
+++ b/drivers/staging/comedi/drivers/quatech_daqp_cs.c
@@ -47,6 +47,8 @@
Devices: [Quatech] DAQP-208 (daqp), DAQP-308
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include "../comedidev.h"
#include <linux/semaphore.h>
@@ -195,8 +197,8 @@
static void daqp_dump(struct comedi_device *dev)
{
- printk(KERN_INFO "DAQP: status %02x; aux status %02x\n",
- inb(dev->iobase + DAQP_STATUS), inb(dev->iobase + DAQP_AUX));
+ dev_info(dev->class_dev, "status %02x; aux status %02x\n",
+ inb(dev->iobase + DAQP_STATUS), inb(dev->iobase + DAQP_AUX));
}
static void hex_dump(char *str, void *ptr, int len)
@@ -255,33 +257,29 @@
int status;
if (local == NULL) {
- printk(KERN_WARNING
- "daqp_interrupt(): irq %d for unknown device.\n", irq);
+ pr_warn("irq %d for unknown device.\n", irq);
return IRQ_NONE;
}
dev = local->dev;
if (dev == NULL) {
- printk(KERN_WARNING "daqp_interrupt(): NULL comedi_device.\n");
+ pr_warn("NULL comedi_device.\n");
return IRQ_NONE;
}
if (!dev->attached) {
- printk(KERN_WARNING
- "daqp_interrupt(): struct comedi_device not yet attached.\n");
+ pr_warn("struct comedi_device not yet attached.\n");
return IRQ_NONE;
}
s = local->s;
if (s == NULL) {
- printk(KERN_WARNING
- "daqp_interrupt(): NULL comedi_subdevice.\n");
+ pr_warn("NULL comedi_subdevice.\n");
return IRQ_NONE;
}
if ((struct local_info_t *)s->private != local) {
- printk(KERN_WARNING
- "daqp_interrupt(): invalid comedi_subdevice.\n");
+ pr_warn("invalid comedi_subdevice.\n");
return IRQ_NONE;
}
@@ -302,7 +300,7 @@
if (status & DAQP_STATUS_DATA_LOST) {
s->async->events |=
COMEDI_CB_EOA | COMEDI_CB_OVERFLOW;
- printk("daqp: data lost\n");
+ dev_warn(dev->class_dev, "data lost\n");
daqp_ai_cancel(dev, s);
break;
}
@@ -331,8 +329,8 @@
}
if (loop_limit <= 0) {
- printk(KERN_WARNING
- "loop_limit reached in daqp_interrupt()\n");
+ dev_warn(dev->class_dev,
+ "loop_limit reached in daqp_interrupt()\n");
daqp_ai_cancel(dev, s);
s->async->events |= COMEDI_CB_EOA | COMEDI_CB_ERROR;
}
@@ -397,9 +395,11 @@
*/
while (--counter
- && (inb(dev->iobase + DAQP_STATUS) & DAQP_STATUS_EVENTS)) ;
+ && (inb(dev->iobase + DAQP_STATUS) & DAQP_STATUS_EVENTS))
+ ;
if (!counter) {
- printk("daqp: couldn't clear interrupts in status register\n");
+ dev_err(dev->class_dev,
+ "couldn't clear interrupts in status register\n");
return -1;
}
@@ -482,19 +482,15 @@
if (err)
return 2;
- /* step 3: make sure arguments are trivially compatible */
+ /* Step 3: check if arguments are trivially valid */
- if (cmd->start_arg != 0) {
- cmd->start_arg = 0;
- err++;
- }
+ err |= cfc_check_trigger_arg_is(&cmd->start_arg, 0);
+
#define MAX_SPEED 10000 /* 100 kHz - in nanoseconds */
- if (cmd->scan_begin_src == TRIG_TIMER
- && cmd->scan_begin_arg < MAX_SPEED) {
- cmd->scan_begin_arg = MAX_SPEED;
- err++;
- }
+ if (cmd->scan_begin_src == TRIG_TIMER)
+ err |= cfc_check_trigger_arg_min(&cmd->scan_begin_arg,
+ MAX_SPEED);
/* If both scan_begin and convert are both timer values, the only
* way that can make sense is if the scan time is the number of
@@ -503,30 +499,18 @@
if (cmd->scan_begin_src == TRIG_TIMER && cmd->convert_src == TRIG_TIMER
&& cmd->scan_begin_arg != cmd->convert_arg * cmd->scan_end_arg) {
- err++;
+ err |= -EINVAL;
}
- if (cmd->convert_src == TRIG_TIMER && cmd->convert_arg < MAX_SPEED) {
- cmd->convert_arg = MAX_SPEED;
- err++;
- }
+ if (cmd->convert_src == TRIG_TIMER)
+ err |= cfc_check_trigger_arg_min(&cmd->convert_arg, MAX_SPEED);
- if (cmd->scan_end_arg != cmd->chanlist_len) {
- cmd->scan_end_arg = cmd->chanlist_len;
- err++;
- }
- if (cmd->stop_src == TRIG_COUNT) {
- if (cmd->stop_arg > 0x00ffffff) {
- cmd->stop_arg = 0x00ffffff;
- err++;
- }
- } else {
- /* TRIG_NONE */
- if (cmd->stop_arg != 0) {
- cmd->stop_arg = 0;
- err++;
- }
- }
+ err |= cfc_check_trigger_arg_is(&cmd->scan_end_arg, cmd->chanlist_len);
+
+ if (cmd->stop_src == TRIG_COUNT)
+ err |= cfc_check_trigger_arg_max(&cmd->stop_arg, 0x00ffffff);
+ else /* TRIG_NONE */
+ err |= cfc_check_trigger_arg_is(&cmd->stop_arg, 0);
if (err)
return 3;
@@ -734,10 +718,11 @@
*/
counter = 100;
while (--counter
- && (inb(dev->iobase + DAQP_STATUS) & DAQP_STATUS_EVENTS)) ;
+ && (inb(dev->iobase + DAQP_STATUS) & DAQP_STATUS_EVENTS))
+ ;
if (!counter) {
- printk(KERN_ERR
- "daqp: couldn't clear interrupts in status register\n");
+ dev_err(dev->class_dev,
+ "couldn't clear interrupts in status register\n");
return -1;
}
@@ -824,8 +809,8 @@
struct comedi_subdevice *s;
if (it->options[0] < 0 || it->options[0] >= MAX_DEV || !local) {
- printk("comedi%d: No such daqp device %d\n",
- dev->minor, it->options[0]);
+ dev_err(dev->class_dev, "No such daqp device %d\n",
+ it->options[0]);
return -EIO;
}
@@ -852,8 +837,8 @@
if (ret)
return ret;
- printk(KERN_INFO "comedi%d: attaching daqp%d (io 0x%04lx)\n",
- dev->minor, it->options[0], dev->iobase);
+ dev_info(dev->class_dev, "attaching daqp%d (io 0x%04lx)\n",
+ it->options[0], dev->iobase);
s = &dev->subdevices[0];
dev->read_subdev = s;
@@ -958,7 +943,7 @@
if (dev_table[i] == NULL)
break;
if (i == MAX_DEV) {
- printk(KERN_NOTICE "daqp_cs: no devices available\n");
+ dev_notice(&link->dev, "no devices available\n");
return -ENODEV;
}
diff --git a/drivers/staging/comedi/drivers/rtd520.c b/drivers/staging/comedi/drivers/rtd520.c
index 41d24b0..8d7c948 100644
--- a/drivers/staging/comedi/drivers/rtd520.c
+++ b/drivers/staging/comedi/drivers/rtd520.c
@@ -107,14 +107,12 @@
#include "../comedidev.h"
#include "comedi_fc.h"
-
-#define DRV_NAME "rtd520"
+#include "rtd520.h"
+#include "plx9080.h"
/*======================================================================
Driver specific stuff (tunable)
======================================================================*/
-/* Enable this to test the new DMA support. You may get hard lock ups */
-/*#define USE_DMA*/
/* We really only need 2 buffers. More than that means being much
smarter about knowing which ones are full. */
@@ -147,20 +145,6 @@
Board specific stuff
======================================================================*/
-/* registers */
-#define PCI_VENDOR_ID_RTD 0x1435
-/*
- The board has three memory windows: las0, las1, and lcfg (the PCI chip)
- Las1 has the data and can be burst DMAed 32bits at a time.
-*/
-#define LCFG_PCIINDEX 0
-/* PCI region 1 is a 256 byte IO space mapping. Use??? */
-#define LAS0_PCIINDEX 2 /* PCI memory resources */
-#define LAS1_PCIINDEX 3
-#define LCFG_PCISIZE 0x100
-#define LAS0_PCISIZE 0x200
-#define LAS1_PCISIZE 0x10
-
#define RTD_CLOCK_RATE 8000000 /* 8Mhz onboard clock */
#define RTD_CLOCK_BASE 125 /* clock period in ns */
@@ -173,9 +157,6 @@
/* min speed when only 1 channel (no burst counter) */
#define RTD_MIN_SPEED_1 5000000 /* 200Hz, in nanoseconds */
-#include "rtd520.h"
-#include "plx9080.h"
-
/* Setup continuous ring of 1/2 FIFO transfers. See RTD manual p91 */
#define DMA_MODE_BITS (\
PLX_LOCAL_BUS_16_WIDE_BITS \
@@ -270,30 +251,24 @@
struct rtdBoard {
const char *name;
int device_id;
- int aiChans;
- int aiBits;
- int aiMaxGain;
int range10Start; /* start of +-10V range */
int rangeUniStart; /* start of +10V range */
+ const struct comedi_lrange *ai_range;
};
static const struct rtdBoard rtd520Boards[] = {
{
.name = "DM7520",
.device_id = 0x7520,
- .aiChans = 16,
- .aiBits = 12,
- .aiMaxGain = 32,
.range10Start = 6,
.rangeUniStart = 12,
+ .ai_range = &rtd_ai_7520_range,
}, {
.name = "PCI4520",
.device_id = 0x4520,
- .aiChans = 16,
- .aiBits = 12,
- .aiMaxGain = 128,
.range10Start = 8,
.rangeUniStart = 16,
+ .ai_range = &rtd_ai_4520_range,
},
};
@@ -307,7 +282,6 @@
void __iomem *las1;
void __iomem *lcfg;
- unsigned long intCount; /* interrupt count */
long aiCount; /* total transfer size (samples) */
int transCount; /* # to transfer data. 0->1/2FIFO */
int flags; /* flag event modes */
@@ -328,21 +302,6 @@
u16 intClearMask; /* interrupt clear mask */
u8 utcCtrl[4]; /* crtl mode for 3 utc + read back */
u8 dioStatus; /* could be read back (dio0Ctrl) */
-#ifdef USE_DMA
- /*
- * Always DMA 1/2 FIFO. Buffer (dmaBuff?) is (at least) twice that
- * size. After transferring, interrupt processes 1/2 FIFO and
- * passes to comedi
- */
- s16 dma0Offset; /* current processing offset (0, 1/2) */
- uint16_t *dma0Buff[DMA_CHAIN_COUNT]; /* DMA buffers (for ADC) */
- dma_addr_t dma0BuffPhysAddr[DMA_CHAIN_COUNT]; /* physical addresses */
- struct plx_dma_desc *dma0Chain; /* DMA descriptor ring for dmaBuff */
- dma_addr_t dma0ChainPhysAddr; /* physical addresses */
- /* shadow registers */
- u8 dma0Control;
- u8 dma1Control;
-#endif /* USE_DMA */
unsigned fifoLen;
};
@@ -365,9 +324,9 @@
Sets the original period to be the true value.
Note: you have to check if the value is larger than the counter range!
*/
-static int rtd_ns_to_timer_base(unsigned int *nanosec, /* desired period (in ns) */
+static int rtd_ns_to_timer_base(unsigned int *nanosec,
int round_mode, int base)
-{ /* clock period (in ns) */
+{
int divider;
switch (round_mode) {
@@ -420,18 +379,19 @@
r |= chan & 0xf;
/* Note: we also setup the channel list bipolar flag array */
- if (range < thisboard->range10Start) { /* first batch are +-5 */
- r |= 0x000; /* +-5 range */
- r |= (range & 0x7) << 4; /* gain */
+ if (range < thisboard->range10Start) {
+ /* +-5 range */
+ r |= 0x000;
+ r |= (range & 0x7) << 4;
CHAN_ARRAY_SET(devpriv->chanBipolar, chanIndex);
- } else if (range < thisboard->rangeUniStart) { /* second batch are +-10 */
- r |= 0x100; /* +-10 range */
- /* gain */
+ } else if (range < thisboard->rangeUniStart) {
+ /* +-10 range */
+ r |= 0x100;
r |= ((range - thisboard->range10Start) & 0x7) << 4;
CHAN_ARRAY_SET(devpriv->chanBipolar, chanIndex);
- } else { /* last batch is +10 */
- r |= 0x200; /* +10 range */
- /* gain */
+ } else {
+ /* +10 range */
+ r |= 0x200;
r |= ((range - thisboard->rangeUniStart) & 0x7) << 4;
CHAN_ARRAY_CLEAR(devpriv->chanBipolar, chanIndex);
}
@@ -507,15 +467,14 @@
}
}
if (i == limit) {
- printk(KERN_INFO "\ncomedi: %s: failed to probe fifo size.\n",
- DRV_NAME);
+ dev_info(dev->class_dev, "failed to probe fifo size.\n");
return -EIO;
}
writel(0, devpriv->las0 + LAS0_ADC_FIFO_CLEAR);
if (fifo_size != 0x400 && fifo_size != 0x2000) {
- printk
- (KERN_INFO "\ncomedi: %s: unexpected fifo size of %i, expected 1024 or 8192.\n",
- DRV_NAME, fifo_size);
+ dev_info(dev->class_dev,
+ "unexpected fifo size of %i, expected 1024 or 8192.\n",
+ fifo_size);
return -EIO;
}
return fifo_size;
@@ -558,12 +517,8 @@
break;
WAIT_QUIETLY;
}
- if (ii >= RTD_ADC_TIMEOUT) {
- DPRINTK
- ("rtd520: Error: ADC never finished! FifoStatus=0x%x\n",
- stat ^ 0x6666);
+ if (ii >= RTD_ADC_TIMEOUT)
return -ETIMEDOUT;
- }
/* read data */
d = readw(devpriv->las1 + LAS1_ADC_FIFO);
@@ -600,15 +555,8 @@
d = readw(devpriv->las1 + LAS1_ADC_FIFO);
continue;
}
-#if 0
- if (!(readl(devpriv->las0 + LAS0_ADC) & FS_ADC_NOT_EMPTY)) {
- DPRINTK("comedi: READ OOPS on %d of %d\n", ii + 1,
- count);
- break;
- }
-#endif
- d = readw(devpriv->las1 + LAS1_ADC_FIFO);
+ d = readw(devpriv->las1 + LAS1_ADC_FIFO);
d = d >> 3; /* low 3 bits are marker lines */
if (CHAN_ARRAY_TEST(devpriv->chanBipolar, s->async->cur_chan)) {
/* convert to comedi unsigned data */
@@ -656,125 +604,6 @@
return 0;
}
-#ifdef USE_DMA
-/*
- Terminate a DMA transfer and wait for everything to quiet down
-*/
-void abort_dma(struct comedi_device *dev, unsigned int channel)
-{ /* DMA channel 0, 1 */
- struct rtdPrivate *devpriv = dev->private;
- unsigned long dma_cs_addr; /* the control/status register */
- uint8_t status;
- unsigned int ii;
- /* unsigned long flags; */
-
- dma_cs_addr = (unsigned long)devpriv->lcfg
- + ((channel == 0) ? LCFG_DMACSR0 : LCFG_DMACSR1);
-
- /* spinlock for plx dma control/status reg */
- /* spin_lock_irqsave( &dev->spinlock, flags ); */
-
- /* abort dma transfer if necessary */
- status = readb(dma_cs_addr);
- if ((status & PLX_DMA_EN_BIT) == 0) { /* not enabled (Error?) */
- DPRINTK("rtd520: AbortDma on non-active channel %d (0x%x)\n",
- channel, status);
- goto abortDmaExit;
- }
-
- /* wait to make sure done bit is zero (needed?) */
- for (ii = 0; (status & PLX_DMA_DONE_BIT) && ii < RTD_DMA_TIMEOUT; ii++) {
- WAIT_QUIETLY;
- status = readb(dma_cs_addr);
- }
- if (status & PLX_DMA_DONE_BIT) {
- printk("rtd520: Timeout waiting for dma %i done clear\n",
- channel);
- goto abortDmaExit;
- }
-
- /* disable channel (required) */
- writeb(0, dma_cs_addr);
- udelay(1); /* needed?? */
- /* set abort bit for channel */
- writeb(PLX_DMA_ABORT_BIT, dma_cs_addr);
-
- /* wait for dma done bit to be set */
- status = readb(dma_cs_addr);
- for (ii = 0;
- (status & PLX_DMA_DONE_BIT) == 0 && ii < RTD_DMA_TIMEOUT; ii++) {
- status = readb(dma_cs_addr);
- WAIT_QUIETLY;
- }
- if ((status & PLX_DMA_DONE_BIT) == 0) {
- printk("rtd520: Timeout waiting for dma %i done set\n",
- channel);
- }
-
-abortDmaExit:
- /* spin_unlock_irqrestore( &dev->spinlock, flags ); */
-}
-
-/*
- Process what is in the DMA transfer buffer and pass to comedi
- Note: this is not re-entrant
-*/
-static int ai_process_dma(struct comedi_device *dev, struct comedi_subdevice *s)
-{
- struct rtdPrivate *devpriv = dev->private;
- int ii, n;
- s16 *dp;
-
- if (devpriv->aiCount == 0) /* transfer already complete */
- return 0;
-
- dp = devpriv->dma0Buff[devpriv->dma0Offset];
- for (ii = 0; ii < devpriv->fifoLen / 2;) { /* convert samples */
- short sample;
-
- if (CHAN_ARRAY_TEST(devpriv->chanBipolar, s->async->cur_chan)) {
- sample = (*dp >> 3) + 2048; /* convert to comedi unsigned data */
- else
- sample = *dp >> 3; /* low 3 bits are marker lines */
-
- *dp++ = sample; /* put processed value back */
-
- if (++s->async->cur_chan >= s->async->cmd.chanlist_len)
- s->async->cur_chan = 0;
-
- ++ii; /* number ready to transfer */
- if (devpriv->aiCount > 0) { /* < 0, means read forever */
- if (--devpriv->aiCount == 0) { /* done */
- /*DPRINTK ("rtd520: Final %d samples\n", ii); */
- break;
- }
- }
- }
-
- /* now pass the whole array to the comedi buffer */
- dp = devpriv->dma0Buff[devpriv->dma0Offset];
- n = comedi_buf_write_alloc(s->async, ii * sizeof(s16));
- if (n < (ii * sizeof(s16))) { /* any residual is an error */
- DPRINTK("rtd520:ai_process_dma buffer overflow %d samples!\n",
- ii - (n / sizeof(s16)));
- s->async->events |= COMEDI_CB_ERROR;
- return -1;
- }
- comedi_buf_memcpy_to(s->async, 0, dp, n);
- comedi_buf_write_free(s->async, n);
-
- /*
- * always at least 1 scan -- 1/2 FIFO is larger than our max scan list
- */
- s->async->events |= COMEDI_CB_BLOCK | COMEDI_CB_EOS;
-
- if (++devpriv->dma0Offset >= DMA_CHAIN_COUNT) { /* next buffer */
- devpriv->dma0Offset = 0;
- }
- return 0;
-}
-#endif /* USE_DMA */
-
/*
Handle all rtd520 interrupts.
Runs atomically and is never re-entered.
@@ -794,47 +623,10 @@
if (!dev->attached)
return IRQ_NONE;
- devpriv->intCount++; /* DEBUG statistics */
-
fifoStatus = readl(devpriv->las0 + LAS0_ADC);
/* check for FIFO full, this automatically halts the ADC! */
- if (!(fifoStatus & FS_ADC_NOT_FULL)) { /* 0 -> full */
- DPRINTK("rtd520: FIFO full! fifo_status=0x%x\n", (fifoStatus ^ 0x6666) & 0x7777); /* should be all 0s */
+ if (!(fifoStatus & FS_ADC_NOT_FULL)) /* 0 -> full */
goto abortTransfer;
- }
-#ifdef USE_DMA
- if (devpriv->flags & DMA0_ACTIVE) { /* Check DMA */
- u32 istatus = readl(devpriv->lcfg + LCFG_ITCSR);
-
- if (istatus & ICS_DMA0_A) {
- if (ai_process_dma(dev, s) < 0) {
- DPRINTK
- ("rtd520: comedi read buffer overflow (DMA) with %ld to go!\n",
- devpriv->aiCount);
- devpriv->dma0Control &= ~PLX_DMA_START_BIT;
- devpriv->dma0Control |= PLX_CLEAR_DMA_INTR_BIT;
- writeb(devpriv->dma0Control,
- devpriv->lcfg + LCFG_DMACSR0);
- goto abortTransfer;
- }
-
- /*DPRINTK ("rtd520: DMA transfer: %ld to go, istatus %x\n",
- devpriv->aiCount, istatus); */
- devpriv->dma0Control &= ~PLX_DMA_START_BIT;
- devpriv->dma0Control |= PLX_CLEAR_DMA_INTR_BIT;
- writeb(devpriv->dma0Control,
- devpriv->lcfg + LCFG_DMACSR0);
- if (0 == devpriv->aiCount) { /* counted down */
- DPRINTK("rtd520: Samples Done (DMA).\n");
- goto transferDone;
- }
- comedi_event(dev, s);
- } else {
- /*DPRINTK ("rtd520: No DMA ready: istatus %x\n", istatus); */
- }
- }
- /* Fall through and check for other interrupt sources */
-#endif /* USE_DMA */
status = readw(devpriv->las0 + LAS0_IT);
/* if interrupt was not caused by our board, or handled above */
@@ -842,57 +634,38 @@
return IRQ_HANDLED;
if (status & IRQM_ADC_ABOUT_CNT) { /* sample count -> read FIFO */
- /* since the priority interrupt controller may have queued a sample
- counter interrupt, even though we have already finished,
- we must handle the possibility that there is no data here */
- if (!(fifoStatus & FS_ADC_HEMPTY)) { /* 0 -> 1/2 full */
- /*DPRINTK("rtd520: Sample int, reading 1/2FIFO. fifo_status 0x%x\n",
- (fifoStatus ^ 0x6666) & 0x7777); */
- if (ai_read_n(dev, s, devpriv->fifoLen / 2) < 0) {
- DPRINTK
- ("rtd520: comedi read buffer overflow (1/2FIFO) with %ld to go!\n",
- devpriv->aiCount);
+ /*
+ * since the priority interrupt controller may have queued
+ * a sample counter interrupt, even though we have already
+ * finished, we must handle the possibility that there is
+ * no data here
+ */
+ if (!(fifoStatus & FS_ADC_HEMPTY)) {
+ /* FIFO half full */
+ if (ai_read_n(dev, s, devpriv->fifoLen / 2) < 0)
goto abortTransfer;
- }
- if (0 == devpriv->aiCount) { /* counted down */
- DPRINTK("rtd520: Samples Done (1/2). fifo_status was 0x%x\n", (fifoStatus ^ 0x6666) & 0x7777); /* should be all 0s */
+
+ if (0 == devpriv->aiCount)
goto transferDone;
- }
+
comedi_event(dev, s);
- } else if (devpriv->transCount > 0) { /* read often */
- /*DPRINTK("rtd520: Sample int, reading %d fifo_status 0x%x\n",
- devpriv->transCount, (fifoStatus ^ 0x6666) & 0x7777); */
- if (fifoStatus & FS_ADC_NOT_EMPTY) { /* 1 -> not empty */
- if (ai_read_n(dev, s, devpriv->transCount) < 0) {
- DPRINTK
- ("rtd520: comedi read buffer overflow (N) with %ld to go!\n",
- devpriv->aiCount);
+ } else if (devpriv->transCount > 0) {
+ if (fifoStatus & FS_ADC_NOT_EMPTY) {
+ /* FIFO not empty */
+ if (ai_read_n(dev, s, devpriv->transCount) < 0)
goto abortTransfer;
- }
- if (0 == devpriv->aiCount) { /* counted down */
- DPRINTK
- ("rtd520: Samples Done (N). fifo_status was 0x%x\n",
- (fifoStatus ^ 0x6666) & 0x7777);
+
+ if (0 == devpriv->aiCount)
goto transferDone;
- }
+
comedi_event(dev, s);
}
- } else { /* wait for 1/2 FIFO (old) */
- DPRINTK
- ("rtd520: Sample int. Wait for 1/2. fifo_status 0x%x\n",
- (fifoStatus ^ 0x6666) & 0x7777);
}
- } else {
- DPRINTK("rtd520: unknown interrupt source!\n");
}
overrun = readl(devpriv->las0 + LAS0_OVERRUN) & 0xffff;
- if (overrun) {
- DPRINTK
- ("rtd520: Interrupt overrun with %ld to go! over_status=0x%x\n",
- devpriv->aiCount, overrun);
+ if (overrun)
goto abortTransfer;
- }
/* clear the interrupt */
devpriv->intClearMask = status;
@@ -913,23 +686,9 @@
writel(0, devpriv->las0 + LAS0_ADC_CONVERSION);
devpriv->intMask = 0;
writew(devpriv->intMask, devpriv->las0 + LAS0_IT);
-#ifdef USE_DMA
- if (devpriv->flags & DMA0_ACTIVE) {
- writel(readl(devpriv->lcfg + LCFG_ITCSR) & ~ICS_DMA0_E,
- devpriv->lcfg + LCFG_ITCSR);
- abort_dma(dev, 0);
- devpriv->flags &= ~DMA0_ACTIVE;
- /* if Using DMA, then we should have read everything by now */
- if (devpriv->aiCount > 0) {
- DPRINTK("rtd520: Lost DMA data! %ld remain\n",
- devpriv->aiCount);
- }
- }
-#endif /* USE_DMA */
if (devpriv->aiCount > 0) { /* there shouldn't be anything left */
fifoStatus = readl(devpriv->las0 + LAS0_ADC);
- DPRINTK("rtd520: Finishing up. %ld remain, fifoStat=%x\n", devpriv->aiCount, (fifoStatus ^ 0x6666) & 0x7777); /* should read all 0s */
ai_read_dregs(dev, s); /* read anything left in FIFO */
}
@@ -944,25 +703,10 @@
fifoStatus = readl(devpriv->las0 + LAS0_ADC);
overrun = readl(devpriv->las0 + LAS0_OVERRUN) & 0xffff;
- DPRINTK
- ("rtd520: Acquisition complete. %ld ints, intStat=%x, overStat=%x\n",
- devpriv->intCount, status, overrun);
return IRQ_HANDLED;
}
-#if 0
-/*
- return the number of samples available
-*/
-static int rtd_ai_poll(struct comedi_device *dev, struct comedi_subdevice *s)
-{
- /* TODO: This needs to mask interrupts, read_dregs, and then re-enable */
- /* Not sure what to do if DMA is active */
- return s->async->buf_write_count - s->async->buf_read_count;
-}
-#endif
-
/*
cmdtest tests a particular command to see if it is valid.
Using the cmdtest ioctl, a user can create a valid cmd
@@ -1001,103 +745,85 @@
if (err)
return 2;
- /* step 3: make sure arguments are trivially compatible */
+ /* Step 3: check if arguments are trivially valid */
- if (cmd->start_arg != 0) {
- cmd->start_arg = 0;
- err++;
- }
+ err |= cfc_check_trigger_arg_is(&cmd->start_arg, 0);
if (cmd->scan_begin_src == TRIG_TIMER) {
/* Note: these are time periods, not actual rates */
if (1 == cmd->chanlist_len) { /* no scanning */
- if (cmd->scan_begin_arg < RTD_MAX_SPEED_1) {
- cmd->scan_begin_arg = RTD_MAX_SPEED_1;
+ if (cfc_check_trigger_arg_min(&cmd->scan_begin_arg,
+ RTD_MAX_SPEED_1)) {
rtd_ns_to_timer(&cmd->scan_begin_arg,
TRIG_ROUND_UP);
- err++;
+ err |= -EINVAL;
}
- if (cmd->scan_begin_arg > RTD_MIN_SPEED_1) {
- cmd->scan_begin_arg = RTD_MIN_SPEED_1;
+ if (cfc_check_trigger_arg_max(&cmd->scan_begin_arg,
+ RTD_MIN_SPEED_1)) {
rtd_ns_to_timer(&cmd->scan_begin_arg,
TRIG_ROUND_DOWN);
- err++;
+ err |= -EINVAL;
}
} else {
- if (cmd->scan_begin_arg < RTD_MAX_SPEED) {
- cmd->scan_begin_arg = RTD_MAX_SPEED;
+ if (cfc_check_trigger_arg_min(&cmd->scan_begin_arg,
+ RTD_MAX_SPEED)) {
rtd_ns_to_timer(&cmd->scan_begin_arg,
TRIG_ROUND_UP);
- err++;
+ err |= -EINVAL;
}
- if (cmd->scan_begin_arg > RTD_MIN_SPEED) {
- cmd->scan_begin_arg = RTD_MIN_SPEED;
+ if (cfc_check_trigger_arg_max(&cmd->scan_begin_arg,
+ RTD_MIN_SPEED)) {
rtd_ns_to_timer(&cmd->scan_begin_arg,
TRIG_ROUND_DOWN);
- err++;
+ err |= -EINVAL;
}
}
} else {
/* external trigger */
/* should be level/edge, hi/lo specification here */
/* should specify multiple external triggers */
- if (cmd->scan_begin_arg > 9) {
- cmd->scan_begin_arg = 9;
- err++;
- }
+ err |= cfc_check_trigger_arg_max(&cmd->scan_begin_arg, 9);
}
+
if (cmd->convert_src == TRIG_TIMER) {
if (1 == cmd->chanlist_len) { /* no scanning */
- if (cmd->convert_arg < RTD_MAX_SPEED_1) {
- cmd->convert_arg = RTD_MAX_SPEED_1;
+ if (cfc_check_trigger_arg_min(&cmd->convert_arg,
+ RTD_MAX_SPEED_1)) {
rtd_ns_to_timer(&cmd->convert_arg,
TRIG_ROUND_UP);
- err++;
+ err |= -EINVAL;
}
- if (cmd->convert_arg > RTD_MIN_SPEED_1) {
- cmd->convert_arg = RTD_MIN_SPEED_1;
+ if (cfc_check_trigger_arg_max(&cmd->convert_arg,
+ RTD_MIN_SPEED_1)) {
rtd_ns_to_timer(&cmd->convert_arg,
TRIG_ROUND_DOWN);
- err++;
+ err |= -EINVAL;
}
} else {
- if (cmd->convert_arg < RTD_MAX_SPEED) {
- cmd->convert_arg = RTD_MAX_SPEED;
+ if (cfc_check_trigger_arg_min(&cmd->convert_arg,
+ RTD_MAX_SPEED)) {
rtd_ns_to_timer(&cmd->convert_arg,
TRIG_ROUND_UP);
- err++;
+ err |= -EINVAL;
}
- if (cmd->convert_arg > RTD_MIN_SPEED) {
- cmd->convert_arg = RTD_MIN_SPEED;
+ if (cfc_check_trigger_arg_max(&cmd->convert_arg,
+ RTD_MIN_SPEED)) {
rtd_ns_to_timer(&cmd->convert_arg,
TRIG_ROUND_DOWN);
- err++;
+ err |= -EINVAL;
}
}
} else {
/* external trigger */
/* see above */
- if (cmd->convert_arg > 9) {
- cmd->convert_arg = 9;
- err++;
- }
+ err |= cfc_check_trigger_arg_max(&cmd->convert_arg, 9);
}
-#if 0
- if (cmd->scan_end_arg != cmd->chanlist_len) {
- cmd->scan_end_arg = cmd->chanlist_len;
- err++;
- }
-#endif
if (cmd->stop_src == TRIG_COUNT) {
/* TODO check for rounding error due to counter wrap */
-
} else {
/* TRIG_NONE */
- if (cmd->stop_arg != 0) {
- cmd->stop_arg = 0;
- err++;
- }
+ err |= cfc_check_trigger_arg_is(&cmd->stop_arg, 0);
}
if (err)
@@ -1159,28 +885,8 @@
writel(0, devpriv->las0 + LAS0_ADC_CONVERSION);
devpriv->intMask = 0;
writew(devpriv->intMask, devpriv->las0 + LAS0_IT);
-#ifdef USE_DMA
- if (devpriv->flags & DMA0_ACTIVE) { /* cancel anything running */
- writel(readl(devpriv->lcfg + LCFG_ITCSR) & ~ICS_DMA0_E,
- devpriv->lcfg + LCFG_ITCSR);
- abort_dma(dev, 0);
- devpriv->flags &= ~DMA0_ACTIVE;
- if (readl(devpriv->lcfg + LCFG_ITCSR) & ICS_DMA0_A) {
- devpriv->dma0Control = PLX_CLEAR_DMA_INTR_BIT;
- writeb(devpriv->dma0Control,
- devpriv->lcfg + LCFG_DMACSR0);
- }
- }
- writel(0, devpriv->las0 + LAS0_DMA0_RESET);
-#endif /* USE_DMA */
writel(0, devpriv->las0 + LAS0_ADC_FIFO_CLEAR);
writel(0, devpriv->las0 + LAS0_OVERRUN);
- devpriv->intCount = 0;
-
- if (!dev->irq) { /* we need interrupts for this */
- DPRINTK("rtd520: ERROR! No interrupt available!\n");
- return -ENXIO;
- }
/* start configuration */
/* load channel list and reset CGT */
@@ -1188,7 +894,6 @@
/* setup the common case and override if needed */
if (cmd->chanlist_len > 1) {
- /*DPRINTK ("rtd520: Multi channel setup\n"); */
/* pacer start source: SOFTWARE */
writel(0, devpriv->las0 + LAS0_PACER_START);
/* burst trigger source: PACER */
@@ -1196,7 +901,6 @@
/* ADC conversion trigger source: BURST */
writel(2, devpriv->las0 + LAS0_ADC_CONVERSION);
} else { /* single channel */
- /*DPRINTK ("rtd520: single channel setup\n"); */
/* pacer start source: SOFTWARE */
writel(0, devpriv->las0 + LAS0_PACER_START);
/* ADC conversion trigger source: PACER */
@@ -1208,8 +912,11 @@
/* scan_begin_arg is in nanoseconds */
/* find out how many samples to wait before transferring */
if (cmd->flags & TRIG_WAKE_EOS) {
- /* this may generate un-sustainable interrupt rates */
- /* the application is responsible for doing the right thing */
+ /*
+ * this may generate un-sustainable interrupt rates
+ * the application is responsible for doing the
+ * right thing
+ */
devpriv->transCount = cmd->chanlist_len;
devpriv->flags |= SEND_EOS;
} else {
@@ -1239,11 +946,6 @@
writel((devpriv->transCount - 1) & 0xffff,
devpriv->las0 + LAS0_ACNT);
}
-
- DPRINTK
- ("rtd520: scanLen=%d transferCount=%d fifoLen=%d\n scanTime(ns)=%d flags=0x%x\n",
- cmd->chanlist_len, devpriv->transCount, devpriv->fifoLen,
- cmd->scan_begin_arg, devpriv->flags);
} else { /* unknown timing, just use 1/2 FIFO */
devpriv->transCount = 0;
devpriv->flags &= ~SEND_EOS;
@@ -1268,10 +970,6 @@
case TRIG_NONE: /* stop when cancel is called */
devpriv->aiCount = -1; /* read forever */
break;
-
- default:
- DPRINTK("rtd520: Warning! ignoring stop_src mode %d\n",
- cmd->stop_src);
}
/* Scan timing */
@@ -1280,7 +978,6 @@
timer = rtd_ns_to_timer(&cmd->scan_begin_arg,
TRIG_ROUND_NEAREST);
/* set PACER clock */
- /*DPRINTK ("rtd520: loading %d into pacer\n", timer); */
writel(timer & 0xffffff, devpriv->las0 + LAS0_PCLK);
break;
@@ -1289,20 +986,16 @@
/* pacer start source: EXTERNAL */
writel(1, devpriv->las0 + LAS0_PACER_START);
break;
-
- default:
- DPRINTK("rtd520: Warning! ignoring scan_begin_src mode %d\n",
- cmd->scan_begin_src);
}
/* Sample timing within a scan */
switch (cmd->convert_src) {
case TRIG_TIMER: /* periodic */
- if (cmd->chanlist_len > 1) { /* only needed for multi-channel */
+ if (cmd->chanlist_len > 1) {
+ /* only needed for multi-channel */
timer = rtd_ns_to_timer(&cmd->convert_arg,
TRIG_ROUND_NEAREST);
/* setup BURST clock */
- /*DPRINTK ("rtd520: loading %d into burst\n", timer); */
writel(timer & 0x3ff, devpriv->las0 + LAS0_BCLK);
}
@@ -1312,10 +1005,6 @@
/* burst trigger source: EXTERNAL */
writel(2, devpriv->las0 + LAS0_BURST_START);
break;
-
- default:
- DPRINTK("rtd520: Warning! ignoring convert_src mode %d\n",
- cmd->convert_src);
}
/* end configuration */
@@ -1329,34 +1018,9 @@
if (devpriv->transCount > 0) { /* transfer every N samples */
devpriv->intMask = IRQM_ADC_ABOUT_CNT;
writew(devpriv->intMask, devpriv->las0 + LAS0_IT);
- DPRINTK("rtd520: Transferring every %d\n", devpriv->transCount);
} else { /* 1/2 FIFO transfers */
-#ifdef USE_DMA
- devpriv->flags |= DMA0_ACTIVE;
-
- /* point to first transfer in ring */
- devpriv->dma0Offset = 0;
- writel(DMA_MODE_BITS, devpriv->lcfg + LCFG_DMAMODE0);
- /* point to first block */
- writel(devpriv->dma0Chain[DMA_CHAIN_COUNT - 1].next,
- devpriv->lcfg + LCFG_DMADPR0);
- writel(DMAS_ADFIFO_HALF_FULL, devpriv->las0 + LAS0_DMA0_SRC);
- writel(readl(devpriv->lcfg + LCFG_ITCSR) | ICS_DMA0_E,
- devpriv->lcfg + LCFG_ITCSR);
- /* Must be 2 steps. See PLX app note about "Starting a DMA transfer" */
- devpriv->dma0Control = PLX_DMA_EN_BIT;
- writeb(devpriv->dma0Control,
- devpriv->lcfg + LCFG_DMACSR0);
- devpriv->dma0Control |= PLX_DMA_START_BIT;
- writeb(devpriv->dma0Control,
- devpriv->lcfg + LCFG_DMACSR0);
- DPRINTK("rtd520: Using DMA0 transfers. plxInt %x RtdInt %x\n",
- readl(devpriv->lcfg + LCFG_ITCSR), devpriv->intMask);
-#else /* USE_DMA */
devpriv->intMask = IRQM_ADC_ABOUT_CNT;
writew(devpriv->intMask, devpriv->las0 + LAS0_IT);
- DPRINTK("rtd520: Transferring every 1/2 FIFO\n");
-#endif /* USE_DMA */
}
/* BUG: start_src is ASSUMED to be TRIG_NOW */
@@ -1381,19 +1045,8 @@
devpriv->intMask = 0;
writew(devpriv->intMask, devpriv->las0 + LAS0_IT);
devpriv->aiCount = 0; /* stop and don't transfer any more */
-#ifdef USE_DMA
- if (devpriv->flags & DMA0_ACTIVE) {
- writel(readl(devpriv->lcfg + LCFG_ITCSR) & ~ICS_DMA0_E,
- devpriv->lcfg + LCFG_ITCSR);
- abort_dma(dev, 0);
- devpriv->flags &= ~DMA0_ACTIVE;
- }
-#endif /* USE_DMA */
status = readw(devpriv->las0 + LAS0_IT);
overrun = readl(devpriv->las0 + LAS0_OVERRUN) & 0xffff;
- DPRINTK
- ("rtd520: Acquisition canceled. %ld ints, intStat=%x, overStat=%x\n",
- devpriv->intCount, status, overrun);
return 0;
}
@@ -1430,14 +1083,11 @@
val = data[i] << 3;
}
- DPRINTK
- ("comedi: rtd520 DAC chan=%d range=%d writing %d as 0x%x\n",
- chan, range, data[i], val);
-
/* a typical programming sequence */
writew(val, devpriv->las1 +
((chan == 0) ? LAS1_DAC1_FIFO : LAS1_DAC2_FIFO));
- writew(0, devpriv->las0 + ((chan == 0) ? LAS0_DAC1 : LAS0_DAC2));
+ writew(0, devpriv->las0 +
+ ((chan == 0) ? LAS0_DAC1 : LAS0_DAC2));
devpriv->aoValue[chan] = data[i]; /* save for read back */
@@ -1449,12 +1099,8 @@
break;
WAIT_QUIETLY;
}
- if (ii >= RTD_DAC_TIMEOUT) {
- DPRINTK
- ("rtd520: Error: DAC never finished! FifoStatus=0x%x\n",
- stat ^ 0x6666);
+ if (ii >= RTD_DAC_TIMEOUT)
return -ETIMEDOUT;
- }
}
/* return the number of samples read/written */
@@ -1507,8 +1153,6 @@
* input lines. */
data[1] = readw(devpriv->las0 + LAS0_DIO0) & 0xff;
- /*DPRINTK("rtd520:port_0 wrote: 0x%x read: 0x%x\n", s->state, data[1]); */
-
return insn->n;
}
@@ -1542,7 +1186,6 @@
return -EINVAL;
}
- DPRINTK("rtd520: port_0_direction=0x%x (1 means out)\n", s->io_bits);
/* TODO support digital match interrupts and strobes */
devpriv->dioStatus = 0x01; /* set direction */
writew(devpriv->dioStatus, devpriv->las0 + LAS0_DIO_STATUS);
@@ -1557,180 +1200,10 @@
return 1;
}
-static struct pci_dev *rtd_find_pci(struct comedi_device *dev,
- struct comedi_devconfig *it)
+static void rtd_reset(struct comedi_device *dev)
{
- const struct rtdBoard *thisboard;
- struct pci_dev *pcidev = NULL;
- int bus = it->options[0];
- int slot = it->options[1];
- int i;
+ struct rtdPrivate *devpriv = dev->private;
- for_each_pci_dev(pcidev) {
- if (pcidev->vendor != PCI_VENDOR_ID_RTD)
- continue;
- if (bus || slot) {
- if (pcidev->bus->number != bus ||
- PCI_SLOT(pcidev->devfn) != slot)
- continue;
- }
- for (i = 0; i < ARRAY_SIZE(rtd520Boards); i++) {
- thisboard = &rtd520Boards[i];
- if (pcidev->device == thisboard->device_id) {
- dev->board_ptr = thisboard;
- return pcidev;
- }
- }
- }
- dev_warn(dev->class_dev,
- "no supported board found! (req. bus/slot: %d/%d)\n",
- bus, slot);
- return NULL;
-}
-
-static int rtd_attach(struct comedi_device *dev, struct comedi_devconfig *it)
-{ /* board name and options flags */
- const struct rtdBoard *thisboard;
- struct rtdPrivate *devpriv;
- struct pci_dev *pcidev;
- struct comedi_subdevice *s;
- resource_size_t pci_base;
- int ret;
-#ifdef USE_DMA
- int index;
-#endif
-
- printk(KERN_INFO "comedi%d: rtd520 attaching.\n", dev->minor);
-
-#if defined(CONFIG_COMEDI_DEBUG) && defined(USE_DMA)
- /* You can set this a load time: modprobe comedi comedi_debug=1 */
- if (0 == comedi_debug) /* force DMA debug printks */
- comedi_debug = 1;
-#endif
-
- /*
- * Allocate the private structure area. alloc_private() is a
- * convenient macro defined in comedidev.h.
- */
- if (alloc_private(dev, sizeof(struct rtdPrivate)) < 0)
- return -ENOMEM;
- devpriv = dev->private;
-
- pcidev = rtd_find_pci(dev, it);
- if (!pcidev)
- return -EIO;
- comedi_set_hw_dev(dev, &pcidev->dev);
- thisboard = comedi_board(dev);
-
- dev->board_name = thisboard->name;
-
- ret = comedi_pci_enable(pcidev, DRV_NAME);
- if (ret < 0) {
- printk(KERN_INFO "Failed to enable PCI device and request regions.\n");
- return ret;
- }
- dev->iobase = 1; /* the "detach" needs this */
-
- /* Initialize the base addresses */
- pci_base = pci_resource_start(pcidev, LAS0_PCIINDEX);
- devpriv->las0 = ioremap_nocache(pci_base, LAS0_PCISIZE);
- pci_base = pci_resource_start(pcidev, LAS1_PCIINDEX);
- devpriv->las1 = ioremap_nocache(pci_base, LAS1_PCISIZE);
- pci_base = pci_resource_start(pcidev, LCFG_PCIINDEX);
- devpriv->lcfg = ioremap_nocache(pci_base, LCFG_PCISIZE);
- if (!devpriv->las0 || !devpriv->las1 || !devpriv->lcfg)
- return -ENOMEM;
-
- { /* The RTD driver does this */
- unsigned char pci_latency;
- u16 revision;
- /*uint32_t epld_version; */
-
- pci_read_config_word(pcidev, PCI_REVISION_ID,
- &revision);
- DPRINTK("%s: PCI revision %d.\n", dev->board_name, revision);
-
- pci_read_config_byte(pcidev,
- PCI_LATENCY_TIMER, &pci_latency);
- if (pci_latency < 32) {
- printk(KERN_INFO "%s: PCI latency changed from %d to %d\n",
- dev->board_name, pci_latency, 32);
- pci_write_config_byte(pcidev,
- PCI_LATENCY_TIMER, 32);
- } else {
- DPRINTK("rtd520: PCI latency = %d\n", pci_latency);
- }
-
- /*
- * Undocumented EPLD version (doesn't match RTD driver results)
- */
- /*DPRINTK ("rtd520: Reading epld from %p\n",
- devpriv->las0+0);
- epld_version = readl (devpriv->las0+0);
- if ((epld_version & 0xF0) >> 4 == 0x0F) {
- DPRINTK("rtd520: pre-v8 EPLD. (%x)\n", epld_version);
- } else {
- DPRINTK("rtd520: EPLD version %x.\n", epld_version >> 4);
- } */
- }
-
- /* Show board configuration */
- printk(KERN_INFO "%s:", dev->board_name);
-
- ret = comedi_alloc_subdevices(dev, 4);
- if (ret)
- return ret;
-
- s = &dev->subdevices[0];
- dev->read_subdev = s;
- /* analog input subdevice */
- s->type = COMEDI_SUBD_AI;
- s->subdev_flags =
- SDF_READABLE | SDF_GROUND | SDF_COMMON | SDF_DIFF | SDF_CMD_READ;
- s->n_chan = thisboard->aiChans;
- s->maxdata = (1 << thisboard->aiBits) - 1;
- if (thisboard->aiMaxGain <= 32)
- s->range_table = &rtd_ai_7520_range;
- else
- s->range_table = &rtd_ai_4520_range;
-
- s->len_chanlist = RTD_MAX_CHANLIST; /* devpriv->fifoLen */
- s->insn_read = rtd_ai_rinsn;
- s->do_cmd = rtd_ai_cmd;
- s->do_cmdtest = rtd_ai_cmdtest;
- s->cancel = rtd_ai_cancel;
- /* s->poll = rtd_ai_poll; *//* not ready yet */
-
- s = &dev->subdevices[1];
- /* analog output subdevice */
- s->type = COMEDI_SUBD_AO;
- s->subdev_flags = SDF_WRITABLE;
- s->n_chan = 2;
- s->maxdata = (1 << thisboard->aiBits) - 1;
- s->range_table = &rtd_ao_range;
- s->insn_write = rtd_ao_winsn;
- s->insn_read = rtd_ao_rinsn;
-
- s = &dev->subdevices[2];
- /* digital i/o subdevice */
- s->type = COMEDI_SUBD_DIO;
- s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
- /* we only support port 0 right now. Ignoring port 1 and user IO */
- s->n_chan = 8;
- s->maxdata = 1;
- s->range_table = &range_digital;
- s->insn_bits = rtd_dio_insn_bits;
- s->insn_config = rtd_dio_insn_config;
-
- /* timer/counter subdevices (not currently supported) */
- s = &dev->subdevices[3];
- s->type = COMEDI_SUBD_COUNTER;
- s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
- s->n_chan = 3;
- s->maxdata = 0xffff;
-
- /* initialize board, per RTD spec */
- /* also, initialize shadow registers */
writel(0, devpriv->las0 + LAS0_BOARD_RESET);
udelay(100); /* needed? */
writel(0, devpriv->lcfg + LCFG_ITCSR);
@@ -1739,6 +1212,18 @@
devpriv->intClearMask = ~0;
writew(devpriv->intClearMask, devpriv->las0 + LAS0_CLEAR);
readw(devpriv->las0 + LAS0_CLEAR);
+}
+
+/*
+ * initialize board, per RTD spec
+ * also, initialize shadow registers
+ */
+static void rtd_init_board(struct comedi_device *dev)
+{
+ struct rtdPrivate *devpriv = dev->private;
+
+ rtd_reset(dev);
+
writel(0, devpriv->las0 + LAS0_OVERRUN);
writel(0, devpriv->las0 + LAS0_CGT_CLEAR);
writel(0, devpriv->las0 + LAS0_ADC_FIFO_CLEAR);
@@ -1756,157 +1241,153 @@
writeb(devpriv->utcCtrl[2], devpriv->las0 + LAS0_UTC_CTRL);
writeb(devpriv->utcCtrl[3], devpriv->las0 + LAS0_UTC_CTRL);
/* TODO: set user out source ??? */
+}
- /* check if our interrupt is available and get it */
- ret = request_irq(pcidev->irq, rtd_interrupt,
- IRQF_SHARED, DRV_NAME, dev);
+/* The RTD driver does this */
+static void rtd_pci_latency_quirk(struct comedi_device *dev,
+ struct pci_dev *pcidev)
+{
+ unsigned char pci_latency;
- if (ret < 0) {
- printk("Could not get interrupt! (%u)\n",
- pcidev->irq);
- return ret;
+ pci_read_config_byte(pcidev, PCI_LATENCY_TIMER, &pci_latency);
+ if (pci_latency < 32) {
+ dev_info(dev->class_dev,
+ "PCI latency changed from %d to %d\n",
+ pci_latency, 32);
+ pci_write_config_byte(pcidev, PCI_LATENCY_TIMER, 32);
}
- dev->irq = pcidev->irq;
- printk(KERN_INFO "( irq=%u )", dev->irq);
+}
+
+static const void *rtd_find_boardinfo(struct comedi_device *dev,
+ struct pci_dev *pcidev)
+{
+ const struct rtdBoard *thisboard;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(rtd520Boards); i++) {
+ thisboard = &rtd520Boards[i];
+ if (pcidev->device == thisboard->device_id)
+ return thisboard;
+ }
+ return NULL;
+}
+
+static int rtd_auto_attach(struct comedi_device *dev,
+ unsigned long context_unused)
+{
+ struct pci_dev *pcidev = comedi_to_pci_dev(dev);
+ const struct rtdBoard *thisboard;
+ struct rtdPrivate *devpriv;
+ struct comedi_subdevice *s;
+ int ret;
+
+ thisboard = rtd_find_boardinfo(dev, pcidev);
+ if (!thisboard)
+ return -ENODEV;
+ dev->board_ptr = thisboard;
+ dev->board_name = thisboard->name;
+
+ devpriv = kzalloc(sizeof(*devpriv), GFP_KERNEL);
+ if (!devpriv)
+ return -ENOMEM;
+ dev->private = devpriv;
+
+ ret = comedi_pci_enable(pcidev, dev->board_name);
+ if (ret)
+ return ret;
+ dev->iobase = 1; /* the "detach" needs this */
+
+ devpriv->las0 = ioremap_nocache(pci_resource_start(pcidev, 2),
+ pci_resource_len(pcidev, 2));
+ devpriv->las1 = ioremap_nocache(pci_resource_start(pcidev, 3),
+ pci_resource_len(pcidev, 3));
+ devpriv->lcfg = ioremap_nocache(pci_resource_start(pcidev, 0),
+ pci_resource_len(pcidev, 0));
+ if (!devpriv->las0 || !devpriv->las1 || !devpriv->lcfg)
+ return -ENOMEM;
+
+ rtd_pci_latency_quirk(dev, pcidev);
+
+ if (pcidev->irq) {
+ ret = request_irq(pcidev->irq, rtd_interrupt, IRQF_SHARED,
+ dev->board_name, dev);
+ if (ret == 0)
+ dev->irq = pcidev->irq;
+ }
+
+ ret = comedi_alloc_subdevices(dev, 4);
+ if (ret)
+ return ret;
+
+ s = &dev->subdevices[0];
+ /* analog input subdevice */
+ s->type = COMEDI_SUBD_AI;
+ s->subdev_flags = SDF_READABLE | SDF_GROUND | SDF_COMMON | SDF_DIFF;
+ s->n_chan = 16;
+ s->maxdata = 0x0fff;
+ s->range_table = thisboard->ai_range;
+ s->len_chanlist = RTD_MAX_CHANLIST;
+ s->insn_read = rtd_ai_rinsn;
+ if (dev->irq) {
+ dev->read_subdev = s;
+ s->subdev_flags |= SDF_CMD_READ;
+ s->do_cmd = rtd_ai_cmd;
+ s->do_cmdtest = rtd_ai_cmdtest;
+ s->cancel = rtd_ai_cancel;
+ }
+
+ s = &dev->subdevices[1];
+ /* analog output subdevice */
+ s->type = COMEDI_SUBD_AO;
+ s->subdev_flags = SDF_WRITABLE;
+ s->n_chan = 2;
+ s->maxdata = 0x0fff;
+ s->range_table = &rtd_ao_range;
+ s->insn_write = rtd_ao_winsn;
+ s->insn_read = rtd_ao_rinsn;
+
+ s = &dev->subdevices[2];
+ /* digital i/o subdevice */
+ s->type = COMEDI_SUBD_DIO;
+ s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
+ /* we only support port 0 right now. Ignoring port 1 and user IO */
+ s->n_chan = 8;
+ s->maxdata = 1;
+ s->range_table = &range_digital;
+ s->insn_bits = rtd_dio_insn_bits;
+ s->insn_config = rtd_dio_insn_config;
+
+ /* timer/counter subdevices (not currently supported) */
+ s = &dev->subdevices[3];
+ s->type = COMEDI_SUBD_COUNTER;
+ s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
+ s->n_chan = 3;
+ s->maxdata = 0xffff;
+
+ rtd_init_board(dev);
ret = rtd520_probe_fifo_depth(dev);
if (ret < 0)
return ret;
-
devpriv->fifoLen = ret;
- printk("( fifoLen=%d )", devpriv->fifoLen);
-
-#ifdef USE_DMA
- if (dev->irq > 0) {
- printk("( DMA buff=%d )\n", DMA_CHAIN_COUNT);
- /*
- * The PLX9080 has 2 DMA controllers, but there could be
- * 4 sources: ADC, digital, DAC1, and DAC2. Since only the
- * ADC supports cmd mode right now, this isn't an issue (yet)
- */
- devpriv->dma0Offset = 0;
-
- for (index = 0; index < DMA_CHAIN_COUNT; index++) {
- devpriv->dma0Buff[index] =
- pci_alloc_consistent(pcidev,
- sizeof(u16) *
- devpriv->fifoLen / 2,
- &devpriv->
- dma0BuffPhysAddr[index]);
- if (devpriv->dma0Buff[index] == NULL) {
- ret = -ENOMEM;
- goto rtd_attach_die_error;
- }
- /*DPRINTK ("buff[%d] @ %p virtual, %x PCI\n",
- index,
- devpriv->dma0Buff[index],
- devpriv->dma0BuffPhysAddr[index]); */
- }
-
- /*
- * setup DMA descriptor ring (use cpu_to_le32 for byte
- * ordering?)
- */
- devpriv->dma0Chain =
- pci_alloc_consistent(pcidev,
- sizeof(struct plx_dma_desc) *
- DMA_CHAIN_COUNT,
- &devpriv->dma0ChainPhysAddr);
- for (index = 0; index < DMA_CHAIN_COUNT; index++) {
- devpriv->dma0Chain[index].pci_start_addr =
- devpriv->dma0BuffPhysAddr[index];
- devpriv->dma0Chain[index].local_start_addr =
- DMALADDR_ADC;
- devpriv->dma0Chain[index].transfer_size =
- sizeof(u16) * devpriv->fifoLen / 2;
- devpriv->dma0Chain[index].next =
- (devpriv->dma0ChainPhysAddr + ((index +
- 1) %
- (DMA_CHAIN_COUNT))
- * sizeof(devpriv->dma0Chain[0]))
- | DMA_TRANSFER_BITS;
- /*DPRINTK ("ring[%d] @%lx PCI: %x, local: %x, N: 0x%x, next: %x\n",
- index,
- ((long)devpriv->dma0ChainPhysAddr
- + (index * sizeof(devpriv->dma0Chain[0]))),
- devpriv->dma0Chain[index].pci_start_addr,
- devpriv->dma0Chain[index].local_start_addr,
- devpriv->dma0Chain[index].transfer_size,
- devpriv->dma0Chain[index].next); */
- }
-
- if (devpriv->dma0Chain == NULL) {
- ret = -ENOMEM;
- goto rtd_attach_die_error;
- }
-
- writel(DMA_MODE_BITS, devpriv->lcfg + LCFG_DMAMODE0);
- /* set DMA trigger source */
- writel(DMAS_ADFIFO_HALF_FULL, devpriv->las0 + LAS0_DMA0_SRC);
- } else {
- printk(KERN_INFO "( no IRQ->no DMA )");
- }
-#endif /* USE_DMA */
if (dev->irq)
writel(ICS_PIE | ICS_PLIE, devpriv->lcfg + LCFG_ITCSR);
- printk("\ncomedi%d: rtd520 driver attached.\n", dev->minor);
+ dev_info(dev->class_dev, "%s attached\n", dev->board_name);
- return 1;
+ return 0;
}
static void rtd_detach(struct comedi_device *dev)
{
struct rtdPrivate *devpriv = dev->private;
struct pci_dev *pcidev = comedi_to_pci_dev(dev);
-#ifdef USE_DMA
- int index;
-#endif
if (devpriv) {
/* Shut down any board ops by resetting it */
-#ifdef USE_DMA
- if (devpriv->lcfg) {
- devpriv->dma0Control = 0;
- devpriv->dma1Control = 0;
- writeb(devpriv->dma0Control,
- devpriv->lcfg + LCFG_DMACSR0);
- writeb(devpriv->dma1Control,
- devpriv->lcfg + LCFG_DMACSR1);
- writel(ICS_PIE | ICS_PLIE, devpriv->lcfg + LCFG_ITCSR);
- }
-#endif /* USE_DMA */
- if (devpriv->las0) {
- writel(0, devpriv->las0 + LAS0_BOARD_RESET);
- devpriv->intMask = 0;
- writew(devpriv->intMask, devpriv->las0 + LAS0_IT);
- devpriv->intClearMask = ~0;
- writew(devpriv->intClearMask,
- devpriv->las0 + LAS0_CLEAR);
- readw(devpriv->las0 + LAS0_CLEAR);
- }
-#ifdef USE_DMA
- /* release DMA */
- for (index = 0; index < DMA_CHAIN_COUNT; index++) {
- if (NULL != devpriv->dma0Buff[index]) {
- pci_free_consistent(pcidev,
- sizeof(u16) *
- devpriv->fifoLen / 2,
- devpriv->dma0Buff[index],
- devpriv->
- dma0BuffPhysAddr[index]);
- devpriv->dma0Buff[index] = NULL;
- }
- }
- if (NULL != devpriv->dma0Chain) {
- pci_free_consistent(pcidev,
- sizeof(struct plx_dma_desc) *
- DMA_CHAIN_COUNT, devpriv->dma0Chain,
- devpriv->dma0ChainPhysAddr);
- devpriv->dma0Chain = NULL;
- }
-#endif /* USE_DMA */
+ if (devpriv->las0 && devpriv->lcfg)
+ rtd_reset(dev);
if (dev->irq) {
writel(readl(devpriv->lcfg + LCFG_ITCSR) &
~(ICS_PLIE | ICS_DMA0_E | ICS_DMA1_E),
@@ -1923,24 +1404,23 @@
if (pcidev) {
if (dev->iobase)
comedi_pci_disable(pcidev);
- pci_dev_put(pcidev);
}
}
static struct comedi_driver rtd520_driver = {
.driver_name = "rtd520",
.module = THIS_MODULE,
- .attach = rtd_attach,
+ .auto_attach = rtd_auto_attach,
.detach = rtd_detach,
};
-static int __devinit rtd520_pci_probe(struct pci_dev *dev,
+static int rtd520_pci_probe(struct pci_dev *dev,
const struct pci_device_id *ent)
{
return comedi_pci_auto_config(dev, &rtd520_driver);
}
-static void __devexit rtd520_pci_remove(struct pci_dev *dev)
+static void rtd520_pci_remove(struct pci_dev *dev)
{
comedi_pci_auto_unconfig(dev);
}
@@ -1956,7 +1436,7 @@
.name = "rtd520",
.id_table = rtd520_pci_table,
.probe = rtd520_pci_probe,
- .remove = __devexit_p(rtd520_pci_remove),
+ .remove = rtd520_pci_remove,
};
module_comedi_pci_driver(rtd520_driver, rtd520_pci_driver);
diff --git a/drivers/staging/comedi/drivers/rtd520.h b/drivers/staging/comedi/drivers/rtd520.h
index a3ec259..25188a5 100644
--- a/drivers/staging/comedi/drivers/rtd520.h
+++ b/drivers/staging/comedi/drivers/rtd520.h
@@ -26,163 +26,132 @@
*/
/*
- LAS0 Runtime Area
- Local Address Space 0 Offset Read Function Write Function
-*/
-#define LAS0_SPARE_00 0x0000 /* - - */
-#define LAS0_SPARE_04 0x0004 /* - - */
-#define LAS0_USER_IO 0x0008 /* Read User Inputs Write User Outputs */
-#define LAS0_SPARE_0C 0x000C /* - - */
-#define LAS0_ADC 0x0010 /* Read FIFO Status Software A/D Start */
-#define LAS0_DAC1 0x0014 /* - Software D/A1 Update */
-#define LAS0_DAC2 0x0018 /* - Software D/A2 Update */
-#define LAS0_SPARE_1C 0x001C /* - - */
-#define LAS0_SPARE_20 0x0020 /* - - */
-#define LAS0_DAC 0x0024 /* - Software Simultaneous D/A1 and D/A2 Update */
-#define LAS0_PACER 0x0028 /* Software Pacer Start Software Pacer Stop */
-#define LAS0_TIMER 0x002C /* Read Timer Counters Status HDIN Software Trigger */
-#define LAS0_IT 0x0030 /* Read Interrupt Status Write Interrupt Enable Mask Register */
-#define LAS0_CLEAR 0x0034 /* Clear ITs set by Clear Mask Set Interrupt Clear Mask */
-#define LAS0_OVERRUN 0x0038 /* Read pending interrupts Clear Overrun Register */
-#define LAS0_SPARE_3C 0x003C /* - - */
+ * Local Address Space 0 Offsets
+ */
+#define LAS0_USER_IO 0x0008 /* User I/O */
+#define LAS0_ADC 0x0010 /* FIFO Status/Software A/D Start */
+#define LAS0_DAC1 0x0014 /* Software D/A1 Update (w) */
+#define LAS0_DAC2 0x0018 /* Software D/A2 Update (w) */
+#define LAS0_DAC 0x0024 /* Software Simultaneous Update (w) */
+#define LAS0_PACER 0x0028 /* Software Pacer Start/Stop */
+#define LAS0_TIMER 0x002c /* Timer Status/HDIN Software Trig. */
+#define LAS0_IT 0x0030 /* Interrupt Status/Enable */
+#define LAS0_CLEAR 0x0034 /* Clear/Set Interrupt Clear Mask */
+#define LAS0_OVERRUN 0x0038 /* Pending interrupts/Clear Overrun */
+#define LAS0_PCLK 0x0040 /* Pacer Clock (24bit) */
+#define LAS0_BCLK 0x0044 /* Burst Clock (10bit) */
+#define LAS0_ADC_SCNT 0x0048 /* A/D Sample counter (10bit) */
+#define LAS0_DAC1_UCNT 0x004c /* D/A1 Update counter (10 bit) */
+#define LAS0_DAC2_UCNT 0x0050 /* D/A2 Update counter (10 bit) */
+#define LAS0_DCNT 0x0054 /* Delay counter (16 bit) */
+#define LAS0_ACNT 0x0058 /* About counter (16 bit) */
+#define LAS0_DAC_CLK 0x005c /* DAC clock (16bit) */
+#define LAS0_UTC0 0x0060 /* 8254 TC Counter 0 */
+#define LAS0_UTC1 0x0064 /* 8254 TC Counter 1 */
+#define LAS0_UTC2 0x0068 /* 8254 TC Counter 2 */
+#define LAS0_UTC_CTRL 0x006c /* 8254 TC Control */
+#define LAS0_DIO0 0x0070 /* Digital I/O Port 0 */
+#define LAS0_DIO1 0x0074 /* Digital I/O Port 1 */
+#define LAS0_DIO0_CTRL 0x0078 /* Digital I/O Control */
+#define LAS0_DIO_STATUS 0x007c /* Digital I/O Status */
+#define LAS0_BOARD_RESET 0x0100 /* Board reset */
+#define LAS0_DMA0_SRC 0x0104 /* DMA 0 Sources select */
+#define LAS0_DMA1_SRC 0x0108 /* DMA 1 Sources select */
+#define LAS0_ADC_CONVERSION 0x010c /* A/D Conversion Signal select */
+#define LAS0_BURST_START 0x0110 /* Burst Clock Start Trigger select */
+#define LAS0_PACER_START 0x0114 /* Pacer Clock Start Trigger select */
+#define LAS0_PACER_STOP 0x0118 /* Pacer Clock Stop Trigger select */
+#define LAS0_ACNT_STOP_ENABLE 0x011c /* About Counter Stop Enable */
+#define LAS0_PACER_REPEAT 0x0120 /* Pacer Start Trigger Mode select */
+#define LAS0_DIN_START 0x0124 /* HiSpd DI Sampling Signal select */
+#define LAS0_DIN_FIFO_CLEAR 0x0128 /* Digital Input FIFO Clear */
+#define LAS0_ADC_FIFO_CLEAR 0x012c /* A/D FIFO Clear */
+#define LAS0_CGT_WRITE 0x0130 /* Channel Gain Table Write */
+#define LAS0_CGL_WRITE 0x0134 /* Channel Gain Latch Write */
+#define LAS0_CG_DATA 0x0138 /* Digital Table Write */
+#define LAS0_CGT_ENABLE 0x013c /* Channel Gain Table Enable */
+#define LAS0_CG_ENABLE 0x0140 /* Digital Table Enable */
+#define LAS0_CGT_PAUSE 0x0144 /* Table Pause Enable */
+#define LAS0_CGT_RESET 0x0148 /* Reset Channel Gain Table */
+#define LAS0_CGT_CLEAR 0x014c /* Clear Channel Gain Table */
+#define LAS0_DAC1_CTRL 0x0150 /* D/A1 output type/range */
+#define LAS0_DAC1_SRC 0x0154 /* D/A1 update source */
+#define LAS0_DAC1_CYCLE 0x0158 /* D/A1 cycle mode */
+#define LAS0_DAC1_RESET 0x015c /* D/A1 FIFO reset */
+#define LAS0_DAC1_FIFO_CLEAR 0x0160 /* D/A1 FIFO clear */
+#define LAS0_DAC2_CTRL 0x0164 /* D/A2 output type/range */
+#define LAS0_DAC2_SRC 0x0168 /* D/A2 update source */
+#define LAS0_DAC2_CYCLE 0x016c /* D/A2 cycle mode */
+#define LAS0_DAC2_RESET 0x0170 /* D/A2 FIFO reset */
+#define LAS0_DAC2_FIFO_CLEAR 0x0174 /* D/A2 FIFO clear */
+#define LAS0_ADC_SCNT_SRC 0x0178 /* A/D Sample Counter Source select */
+#define LAS0_PACER_SELECT 0x0180 /* Pacer Clock select */
+#define LAS0_SBUS0_SRC 0x0184 /* SyncBus 0 Source select */
+#define LAS0_SBUS0_ENABLE 0x0188 /* SyncBus 0 enable */
+#define LAS0_SBUS1_SRC 0x018c /* SyncBus 1 Source select */
+#define LAS0_SBUS1_ENABLE 0x0190 /* SyncBus 1 enable */
+#define LAS0_SBUS2_SRC 0x0198 /* SyncBus 2 Source select */
+#define LAS0_SBUS2_ENABLE 0x019c /* SyncBus 2 enable */
+#define LAS0_ETRG_POLARITY 0x01a4 /* Ext. Trigger polarity select */
+#define LAS0_EINT_POLARITY 0x01a8 /* Ext. Interrupt polarity select */
+#define LAS0_UTC0_CLOCK 0x01ac /* UTC0 Clock select */
+#define LAS0_UTC0_GATE 0x01b0 /* UTC0 Gate select */
+#define LAS0_UTC1_CLOCK 0x01b4 /* UTC1 Clock select */
+#define LAS0_UTC1_GATE 0x01b8 /* UTC1 Gate select */
+#define LAS0_UTC2_CLOCK 0x01bc /* UTC2 Clock select */
+#define LAS0_UTC2_GATE 0x01c0 /* UTC2 Gate select */
+#define LAS0_UOUT0_SELECT 0x01c4 /* User Output 0 source select */
+#define LAS0_UOUT1_SELECT 0x01c8 /* User Output 1 source select */
+#define LAS0_DMA0_RESET 0x01cc /* DMA0 Request state machine reset */
+#define LAS0_DMA1_RESET 0x01d0 /* DMA1 Request state machine reset */
/*
- LAS0 Runtime Area Timer/Counter,Dig.IO
- Name Local Address Function
-*/
-#define LAS0_PCLK 0x0040 /* Pacer Clock value (24bit) Pacer Clock load (24bit) */
-#define LAS0_BCLK 0x0044 /* Burst Clock value (10bit) Burst Clock load (10bit) */
-#define LAS0_ADC_SCNT 0x0048 /* A/D Sample counter value (10bit) A/D Sample counter load (10bit) */
-#define LAS0_DAC1_UCNT 0x004C /* D/A1 Update counter value (10 bit) D/A1 Update counter load (10bit) */
-#define LAS0_DAC2_UCNT 0x0050 /* D/A2 Update counter value (10 bit) D/A2 Update counter load (10bit) */
-#define LAS0_DCNT 0x0054 /* Delay counter value (16 bit) Delay counter load (16bit) */
-#define LAS0_ACNT 0x0058 /* About counter value (16 bit) About counter load (16bit) */
-#define LAS0_DAC_CLK 0x005C /* DAC clock value (16bit) DAC clock load (16bit) */
-#define LAS0_UTC0 0x0060 /* 8254 TC Counter 0 User TC 0 value Load count in TC Counter 0 */
-#define LAS0_UTC1 0x0064 /* 8254 TC Counter 1 User TC 1 value Load count in TC Counter 1 */
-#define LAS0_UTC2 0x0068 /* 8254 TC Counter 2 User TC 2 value Load count in TC Counter 2 */
-#define LAS0_UTC_CTRL 0x006C /* 8254 TC Control Word Program counter mode for TC */
-#define LAS0_DIO0 0x0070 /* Digital I/O Port 0 Read Port Digital I/O Port 0 Write Port */
-#define LAS0_DIO1 0x0074 /* Digital I/O Port 1 Read Port Digital I/O Port 1 Write Port */
-#define LAS0_DIO0_CTRL 0x0078 /* Clear digital IRQ status flag/read Clear digital chip/program Port 0 */
-#define LAS0_DIO_STATUS 0x007C /* Read Digital I/O Status word Program digital control register & */
+ * Local Address Space 1 Offsets
+ */
+#define LAS1_ADC_FIFO 0x0000 /* A/D FIFO (16bit) */
+#define LAS1_HDIO_FIFO 0x0004 /* HiSpd DI FIFO (16bit) */
+#define LAS1_DAC1_FIFO 0x0008 /* D/A1 FIFO (16bit) */
+#define LAS1_DAC2_FIFO 0x000c /* D/A2 FIFO (16bit) */
/*
- LAS0 Setup Area
- Name Local Address Function
-*/
-#define LAS0_BOARD_RESET 0x0100 /* Board reset */
-#define LAS0_DMA0_SRC 0x0104 /* DMA 0 Sources select */
-#define LAS0_DMA1_SRC 0x0108 /* DMA 1 Sources select */
-#define LAS0_ADC_CONVERSION 0x010C /* A/D Conversion Signal select */
-#define LAS0_BURST_START 0x0110 /* Burst Clock Start Trigger select */
-#define LAS0_PACER_START 0x0114 /* Pacer Clock Start Trigger select */
-#define LAS0_PACER_STOP 0x0118 /* Pacer Clock Stop Trigger select */
-#define LAS0_ACNT_STOP_ENABLE 0x011C /* About Counter Stop Enable */
-#define LAS0_PACER_REPEAT 0x0120 /* Pacer Start Trigger Mode select */
-#define LAS0_DIN_START 0x0124 /* High Speed Digital Input Sampling Signal select */
-#define LAS0_DIN_FIFO_CLEAR 0x0128 /* Digital Input FIFO Clear */
-#define LAS0_ADC_FIFO_CLEAR 0x012C /* A/D FIFO Clear */
-#define LAS0_CGT_WRITE 0x0130 /* Channel Gain Table Write */
-#define LAS0_CGL_WRITE 0x0134 /* Channel Gain Latch Write */
-#define LAS0_CG_DATA 0x0138 /* Digital Table Write */
-#define LAS0_CGT_ENABLE 0x013C /* Channel Gain Table Enable */
-#define LAS0_CG_ENABLE 0x0140 /* Digital Table Enable */
-#define LAS0_CGT_PAUSE 0x0144 /* Table Pause Enable */
-#define LAS0_CGT_RESET 0x0148 /* Reset Channel Gain Table */
-#define LAS0_CGT_CLEAR 0x014C /* Clear Channel Gain Table */
-#define LAS0_DAC1_CTRL 0x0150 /* D/A1 output type/range */
-#define LAS0_DAC1_SRC 0x0154 /* D/A1 update source */
-#define LAS0_DAC1_CYCLE 0x0158 /* D/A1 cycle mode */
-#define LAS0_DAC1_RESET 0x015C /* D/A1 FIFO reset */
-#define LAS0_DAC1_FIFO_CLEAR 0x0160 /* D/A1 FIFO clear */
-#define LAS0_DAC2_CTRL 0x0164 /* D/A2 output type/range */
-#define LAS0_DAC2_SRC 0x0168 /* D/A2 update source */
-#define LAS0_DAC2_CYCLE 0x016C /* D/A2 cycle mode */
-#define LAS0_DAC2_RESET 0x0170 /* D/A2 FIFO reset */
-#define LAS0_DAC2_FIFO_CLEAR 0x0174 /* D/A2 FIFO clear */
-#define LAS0_ADC_SCNT_SRC 0x0178 /* A/D Sample Counter Source select */
-#define LAS0_PACER_SELECT 0x0180 /* Pacer Clock select */
-#define LAS0_SBUS0_SRC 0x0184 /* SyncBus 0 Source select */
-#define LAS0_SBUS0_ENABLE 0x0188 /* SyncBus 0 enable */
-#define LAS0_SBUS1_SRC 0x018C /* SyncBus 1 Source select */
-#define LAS0_SBUS1_ENABLE 0x0190 /* SyncBus 1 enable */
-#define LAS0_SBUS2_SRC 0x0198 /* SyncBus 2 Source select */
-#define LAS0_SBUS2_ENABLE 0x019C /* SyncBus 2 enable */
-#define LAS0_ETRG_POLARITY 0x01A4 /* External Trigger polarity select */
-#define LAS0_EINT_POLARITY 0x01A8 /* External Interrupt polarity select */
-#define LAS0_UTC0_CLOCK 0x01AC /* UTC0 Clock select */
-#define LAS0_UTC0_GATE 0x01B0 /* UTC0 Gate select */
-#define LAS0_UTC1_CLOCK 0x01B4 /* UTC1 Clock select */
-#define LAS0_UTC1_GATE 0x01B8 /* UTC1 Gate select */
-#define LAS0_UTC2_CLOCK 0x01BC /* UTC2 Clock select */
-#define LAS0_UTC2_GATE 0x01C0 /* UTC2 Gate select */
-#define LAS0_UOUT0_SELECT 0x01C4 /* User Output 0 source select */
-#define LAS0_UOUT1_SELECT 0x01C8 /* User Output 1 source select */
-#define LAS0_DMA0_RESET 0x01CC /* DMA0 Request state machine reset */
-#define LAS0_DMA1_RESET 0x01D0 /* DMA1 Request state machine reset */
-
-/*
- LAS1
- Name Local Address Function
-*/
-#define LAS1_ADC_FIFO 0x0000 /* Read A/D FIFO (16bit) - */
-#define LAS1_HDIO_FIFO 0x0004 /* Read High Speed Digital Input FIFO (16bit) - */
-#define LAS1_DAC1_FIFO 0x0008 /* - Write D/A1 FIFO (16bit) */
-#define LAS1_DAC2_FIFO 0x000C /* - Write D/A2 FIFO (16bit) */
-
-/*
- LCFG: PLX 9080 local config & runtime registers
- Name Local Address Function
-*/
-#define LCFG_ITCSR 0x0068 /* INTCSR, Interrupt Control/Status Register */
-#define LCFG_DMAMODE0 0x0080 /* DMA Channel 0 Mode Register */
-#define LCFG_DMAPADR0 0x0084 /* DMA Channel 0 PCI Address Register */
-#define LCFG_DMALADR0 0x0088 /* DMA Channel 0 Local Address Reg */
-#define LCFG_DMASIZ0 0x008C /* DMA Channel 0 Transfer Size (Bytes) Register */
-#define LCFG_DMADPR0 0x0090 /* DMA Channel 0 Descriptor Pointer Register */
-#define LCFG_DMAMODE1 0x0094 /* DMA Channel 1 Mode Register */
-#define LCFG_DMAPADR1 0x0098 /* DMA Channel 1 PCI Address Register */
-#define LCFG_DMALADR1 0x009C /* DMA Channel 1 Local Address Register */
-#define LCFG_DMASIZ1 0x00A0 /* DMA Channel 1 Transfer Size (Bytes) Register */
-#define LCFG_DMADPR1 0x00A4 /* DMA Channel 1 Descriptor Pointer Register */
-#define LCFG_DMACSR0 0x00A8 /* DMA Channel 0 Command/Status Register */
-#define LCFG_DMACSR1 0x00A9 /* DMA Channel 0 Command/Status Register */
-#define LCFG_DMAARB 0x00AC /* DMA Arbitration Register */
-#define LCFG_DMATHR 0x00B0 /* DMA Threshold Register */
-
-/*======================================================================
- Resister bit definitions
-======================================================================*/
+ * PLX 9080 local config & runtime registers
+ */
+#define LCFG_ITCSR 0x0068 /* Interrupt Control/Status */
+#define LCFG_DMAMODE0 0x0080 /* DMA0 Mode */
+#define LCFG_DMAPADR0 0x0084 /* DMA0 PCI Address */
+#define LCFG_DMALADR0 0x0088 /* DMA0 Local Address */
+#define LCFG_DMASIZ0 0x008c /* DMA0 Transfer Size (Bytes) */
+#define LCFG_DMADPR0 0x0090 /* DMA0 Descriptor Pointer */
+#define LCFG_DMAMODE1 0x0094 /* DMA1 Mode */
+#define LCFG_DMAPADR1 0x0098 /* DMA1 PCI Address */
+#define LCFG_DMALADR1 0x009c /* DMA1 Local Address */
+#define LCFG_DMASIZ1 0x00a0 /* DMA1 Transfer Size (Bytes) */
+#define LCFG_DMADPR1 0x00a4 /* DMA1 Descriptor Pointer */
+#define LCFG_DMACSR0 0x00a8 /* DMA0 Command/Status */
+#define LCFG_DMACSR1 0x00a9 /* DMA0 Command/Status */
+#define LCFG_DMAARB 0x00ac /* DMA Arbitration */
+#define LCFG_DMATHR 0x00b0 /* DMA Threshold */
/* FIFO Status Word Bits (RtdFifoStatus) */
-#define FS_DAC1_NOT_EMPTY 0x0001 /* D0 - DAC1 FIFO not empty */
-#define FS_DAC1_HEMPTY 0x0002 /* D1 - DAC1 FIFO half empty */
-#define FS_DAC1_NOT_FULL 0x0004 /* D2 - DAC1 FIFO not full */
-#define FS_DAC2_NOT_EMPTY 0x0010 /* D4 - DAC2 FIFO not empty */
-#define FS_DAC2_HEMPTY 0x0020 /* D5 - DAC2 FIFO half empty */
-#define FS_DAC2_NOT_FULL 0x0040 /* D6 - DAC2 FIFO not full */
-#define FS_ADC_NOT_EMPTY 0x0100 /* D8 - ADC FIFO not empty */
-#define FS_ADC_HEMPTY 0x0200 /* D9 - ADC FIFO half empty */
-#define FS_ADC_NOT_FULL 0x0400 /* D10 - ADC FIFO not full */
-#define FS_DIN_NOT_EMPTY 0x1000 /* D12 - DIN FIFO not empty */
-#define FS_DIN_HEMPTY 0x2000 /* D13 - DIN FIFO half empty */
-#define FS_DIN_NOT_FULL 0x4000 /* D14 - DIN FIFO not full */
+#define FS_DAC1_NOT_EMPTY (1 << 0) /* DAC1 FIFO not empty */
+#define FS_DAC1_HEMPTY (1 << 1) /* DAC1 FIFO half empty */
+#define FS_DAC1_NOT_FULL (1 << 2) /* DAC1 FIFO not full */
+#define FS_DAC2_NOT_EMPTY (1 << 4) /* DAC2 FIFO not empty */
+#define FS_DAC2_HEMPTY (1 << 5) /* DAC2 FIFO half empty */
+#define FS_DAC2_NOT_FULL (1 << 6) /* DAC2 FIFO not full */
+#define FS_ADC_NOT_EMPTY (1 << 8) /* ADC FIFO not empty */
+#define FS_ADC_HEMPTY (1 << 9) /* ADC FIFO half empty */
+#define FS_ADC_NOT_FULL (1 << 10) /* ADC FIFO not full */
+#define FS_DIN_NOT_EMPTY (1 << 12) /* DIN FIFO not empty */
+#define FS_DIN_HEMPTY (1 << 13) /* DIN FIFO half empty */
+#define FS_DIN_NOT_FULL (1 << 14) /* DIN FIFO not full */
/* Timer Status Word Bits (GetTimerStatus) */
-#define TS_PCLK_GATE 0x0001
-/* D0 - Pacer Clock Gate [0 - gated, 1 - enabled] */
-#define TS_BCLK_GATE 0x0002
-/* D1 - Burst Clock Gate [0 - disabled, 1 - running] */
-#define TS_DCNT_GATE 0x0004
-/* D2 - Pacer Clock Delayed Start Trigger [0 - delay over, 1 - delay in */
-/* progress] */
-#define TS_ACNT_GATE 0x0008
-/* D3 - Pacer Clock About Trigger [0 - completed, 1 - in progress] */
-#define TS_PCLK_RUN 0x0010
-/* D4 - Pacer Clock Shutdown Flag [0 - Pacer Clock cannot be start */
-/* triggered only by Software Pacer Start Command, 1 - Pacer Clock can */
-/* be start triggered] */
+#define TS_PCLK_GATE (1 << 0) /* Pacer Clock Gate enabled */
+#define TS_BCLK_GATE (1 << 1) /* Burst Clock Gate running */
+#define TS_DCNT_GATE (1 << 2) /* Pacer Clock Delayed Start Trig. */
+#define TS_ACNT_GATE (1 << 3) /* Pacer Clock About Trig. */
+#define TS_PCLK_RUN (1 << 4) /* Pacer Clock Shutdown Flag */
/* External Trigger polarity select */
/* External Interrupt polarity select */
diff --git a/drivers/staging/comedi/drivers/rti800.c b/drivers/staging/comedi/drivers/rti800.c
index 137885b..7e577e4 100644
--- a/drivers/staging/comedi/drivers/rti800.c
+++ b/drivers/staging/comedi/drivers/rti800.c
@@ -161,8 +161,6 @@
int muxgain_bits;
};
-#define devpriv ((struct rti800_private *)dev->private)
-
#define RTI800_TIMEOUT 100
static irqreturn_t rti800_interrupt(int irq, void *dev)
@@ -177,6 +175,7 @@
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
+ struct rti800_private *devpriv = dev->private;
int i, t;
int status;
int chan = CR_CHAN(insn->chanspec);
@@ -229,6 +228,7 @@
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
+ struct rti800_private *devpriv = dev->private;
int i;
int chan = CR_CHAN(insn->chanspec);
@@ -242,6 +242,7 @@
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
+ struct rti800_private *devpriv = dev->private;
int chan = CR_CHAN(insn->chanspec);
int d;
int i;
@@ -303,6 +304,7 @@
static int rti800_attach(struct comedi_device *dev, struct comedi_devconfig *it)
{
const struct rti800_board *board = comedi_board(dev);
+ struct rti800_private *devpriv;
unsigned int irq;
unsigned long iobase;
int ret;
@@ -347,9 +349,10 @@
if (ret)
return ret;
- ret = alloc_private(dev, sizeof(struct rti800_private));
- if (ret < 0)
- return ret;
+ devpriv = kzalloc(sizeof(*devpriv), GFP_KERNEL);
+ if (!devpriv)
+ return -ENOMEM;
+ dev->private = devpriv;
devpriv->adc_mux = it->options[2];
devpriv->adc_range = it->options[3];
diff --git a/drivers/staging/comedi/drivers/rti802.c b/drivers/staging/comedi/drivers/rti802.c
index 3f9d027..2185ca1 100644
--- a/drivers/staging/comedi/drivers/rti802.c
+++ b/drivers/staging/comedi/drivers/rti802.c
@@ -55,12 +55,11 @@
unsigned int ao_readback[8];
};
-#define devpriv ((struct rti802_private *)dev->private)
-
static int rti802_ao_insn_read(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
+ struct rti802_private *devpriv = dev->private;
int i;
for (i = 0; i < insn->n; i++)
@@ -73,6 +72,7 @@
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
+ struct rti802_private *devpriv = dev->private;
int i, d;
int chan = CR_CHAN(insn->chanspec);
@@ -89,6 +89,7 @@
static int rti802_attach(struct comedi_device *dev, struct comedi_devconfig *it)
{
+ struct rti802_private *devpriv;
struct comedi_subdevice *s;
int i;
unsigned long iobase;
@@ -104,8 +105,10 @@
dev->board_name = "rti802";
- if (alloc_private(dev, sizeof(struct rti802_private)))
+ devpriv = kzalloc(sizeof(*devpriv), GFP_KERNEL);
+ if (!devpriv)
return -ENOMEM;
+ dev->private = devpriv;
ret = comedi_alloc_subdevices(dev, 1);
if (ret)
diff --git a/drivers/staging/comedi/drivers/s526.c b/drivers/staging/comedi/drivers/s526.c
index a1e2562..39232b35 100644
--- a/drivers/staging/comedi/drivers/s526.c
+++ b/drivers/staging/comedi/drivers/s526.c
@@ -564,10 +564,10 @@
}
dev->iobase = iobase;
- ret = alloc_private(dev, sizeof(*devpriv));
- if (ret)
- return ret;
- devpriv = dev->private;
+ devpriv = kzalloc(sizeof(*devpriv), GFP_KERNEL);
+ if (!devpriv)
+ return -ENOMEM;
+ dev->private = devpriv;
ret = comedi_alloc_subdevices(dev, 4);
if (ret)
diff --git a/drivers/staging/comedi/drivers/s626.c b/drivers/staging/comedi/drivers/s626.c
index 551d68b..6dc1d28 100644
--- a/drivers/staging/comedi/drivers/s626.c
+++ b/drivers/staging/comedi/drivers/s626.c
@@ -161,7 +161,6 @@
};
*/
-#define devpriv ((struct s626_private *)dev->private)
#define diopriv ((struct dio_private *)s->private)
/* COUNTER OBJECT ------------------------------------------------ */
@@ -232,6 +231,8 @@
/* critical section. */
static void DEBItransfer(struct comedi_device *dev)
{
+ struct s626_private *devpriv = dev->private;
+
/* Initiate upload of shadow RAM to DEBI control register. */
MC_ENABLE(P_MC2, MC2_UPLD_DEBI);
@@ -249,6 +250,7 @@
static uint16_t DEBIread(struct comedi_device *dev, uint16_t addr)
{
+ struct s626_private *devpriv = dev->private;
uint16_t retval;
/* Set up DEBI control register value in shadow RAM. */
@@ -267,6 +269,7 @@
/* Write a value to a gate array register. */
static void DEBIwrite(struct comedi_device *dev, uint16_t addr, uint16_t wdata)
{
+ struct s626_private *devpriv = dev->private;
/* Set up DEBI control register value in shadow RAM. */
WR7146(P_DEBICMD, DEBI_CMD_WRWORD | addr);
@@ -283,6 +286,7 @@
static void DEBIreplace(struct comedi_device *dev, uint16_t addr, uint16_t mask,
uint16_t wdata)
{
+ struct s626_private *devpriv = dev->private;
/* Copy target gate array register into P_DEBIAD register. */
WR7146(P_DEBICMD, DEBI_CMD_RDWORD | addr);
@@ -302,6 +306,8 @@
static uint32_t I2Chandshake(struct comedi_device *dev, uint32_t val)
{
+ struct s626_private *devpriv = dev->private;
+
/* Write I2C command to I2C Transfer Control shadow register. */
WR7146(P_I2CCTRL, val);
@@ -324,6 +330,7 @@
/* Read uint8_t from EEPROM. */
static uint8_t I2Cread(struct comedi_device *dev, uint8_t addr)
{
+ struct s626_private *devpriv = dev->private;
uint8_t rtnval;
/* Send EEPROM target address. */
@@ -375,6 +382,7 @@
*/
static void SendDAC(struct comedi_device *dev, uint32_t val)
{
+ struct s626_private *devpriv = dev->private;
/* START THE SERIAL CLOCK RUNNING ------------- */
@@ -496,6 +504,7 @@
/* Private helper function: Write setpoint to an application DAC channel. */
static void SetDAC(struct comedi_device *dev, uint16_t chan, short dacdata)
{
+ struct s626_private *devpriv = dev->private;
register uint16_t signmask;
register uint32_t WSImage;
@@ -553,6 +562,7 @@
static void WriteTrimDAC(struct comedi_device *dev, uint8_t LogicalChan,
uint8_t DacData)
{
+ struct s626_private *devpriv = dev->private;
uint32_t chan;
/* Save the new setpoint in case the application needs to read it back later. */
@@ -735,6 +745,7 @@
static irqreturn_t s626_irq_handler(int irq, void *d)
{
struct comedi_device *dev = d;
+ struct s626_private *devpriv = dev->private;
struct comedi_subdevice *s;
struct comedi_cmd *cmd;
struct enc_private *k;
@@ -968,6 +979,7 @@
*/
static void ResetADC(struct comedi_device *dev, uint8_t *ppl)
{
+ struct s626_private *devpriv = dev->private;
register uint32_t *pRPS;
uint32_t JmpAdrs;
uint16_t i;
@@ -1163,6 +1175,7 @@
/* static int s626_ai_rinsn(struct comedi_device *dev,struct comedi_subdevice *s,struct comedi_insn *insn,unsigned int *data) */
/* { */
+/* struct s626_private *devpriv = dev->private; */
/* register uint8_t i; */
/* register int32_t *readaddr; */
@@ -1191,6 +1204,7 @@
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
+ struct s626_private *devpriv = dev->private;
uint16_t chan = CR_CHAN(insn->chanspec);
uint16_t range = CR_RANGE(insn->chanspec);
uint16_t AdcSpec = 0;
@@ -1302,6 +1316,8 @@
static int s626_ai_inttrig(struct comedi_device *dev,
struct comedi_subdevice *s, unsigned int trignum)
{
+ struct s626_private *devpriv = dev->private;
+
if (trignum != 0)
return -EINVAL;
@@ -1378,7 +1394,7 @@
/* TO COMPLETE */
static int s626_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
{
-
+ struct s626_private *devpriv = dev->private;
uint8_t ppl[16];
struct comedi_cmd *cmd = &s->async->cmd;
struct enc_private *k;
@@ -1533,80 +1549,46 @@
/* step 3: make sure arguments are trivially compatible */
- if (cmd->start_src != TRIG_EXT && cmd->start_arg != 0) {
- cmd->start_arg = 0;
- err++;
- }
+ if (cmd->start_src != TRIG_EXT)
+ err |= cfc_check_trigger_arg_is(&cmd->start_arg, 0);
+ if (cmd->start_src == TRIG_EXT)
+ err |= cfc_check_trigger_arg_max(&cmd->start_arg, 39);
- if (cmd->start_src == TRIG_EXT && cmd->start_arg > 39) {
- cmd->start_arg = 39;
- err++;
- }
+ if (cmd->scan_begin_src == TRIG_EXT)
+ err |= cfc_check_trigger_arg_max(&cmd->scan_begin_arg, 39);
- if (cmd->scan_begin_src == TRIG_EXT && cmd->scan_begin_arg > 39) {
- cmd->scan_begin_arg = 39;
- err++;
- }
+ if (cmd->convert_src == TRIG_EXT)
+ err |= cfc_check_trigger_arg_max(&cmd->convert_arg, 39);
- if (cmd->convert_src == TRIG_EXT && cmd->convert_arg > 39) {
- cmd->convert_arg = 39;
- err++;
- }
#define MAX_SPEED 200000 /* in nanoseconds */
#define MIN_SPEED 2000000000 /* in nanoseconds */
if (cmd->scan_begin_src == TRIG_TIMER) {
- if (cmd->scan_begin_arg < MAX_SPEED) {
- cmd->scan_begin_arg = MAX_SPEED;
- err++;
- }
- if (cmd->scan_begin_arg > MIN_SPEED) {
- cmd->scan_begin_arg = MIN_SPEED;
- err++;
- }
+ err |= cfc_check_trigger_arg_min(&cmd->scan_begin_arg,
+ MAX_SPEED);
+ err |= cfc_check_trigger_arg_max(&cmd->scan_begin_arg,
+ MIN_SPEED);
} else {
/* external trigger */
/* should be level/edge, hi/lo specification here */
/* should specify multiple external triggers */
-/* if(cmd->scan_begin_arg>9){ */
-/* cmd->scan_begin_arg=9; */
-/* err++; */
-/* } */
+/* err |= cfc_check_trigger_arg_max(&cmd->scan_begin_arg, 9); */
}
if (cmd->convert_src == TRIG_TIMER) {
- if (cmd->convert_arg < MAX_SPEED) {
- cmd->convert_arg = MAX_SPEED;
- err++;
- }
- if (cmd->convert_arg > MIN_SPEED) {
- cmd->convert_arg = MIN_SPEED;
- err++;
- }
+ err |= cfc_check_trigger_arg_min(&cmd->convert_arg, MAX_SPEED);
+ err |= cfc_check_trigger_arg_max(&cmd->convert_arg, MIN_SPEED);
} else {
/* external trigger */
/* see above */
-/* if(cmd->convert_arg>9){ */
-/* cmd->convert_arg=9; */
-/* err++; */
-/* } */
+/* err |= cfc_check_trigger_arg_max(&cmd->scan_begin_arg, 9); */
}
- if (cmd->scan_end_arg != cmd->chanlist_len) {
- cmd->scan_end_arg = cmd->chanlist_len;
- err++;
- }
- if (cmd->stop_src == TRIG_COUNT) {
- if (cmd->stop_arg > 0x00ffffff) {
- cmd->stop_arg = 0x00ffffff;
- err++;
- }
- } else {
- /* TRIG_NONE */
- if (cmd->stop_arg != 0) {
- cmd->stop_arg = 0;
- err++;
- }
- }
+ err |= cfc_check_trigger_arg_is(&cmd->scan_end_arg, cmd->chanlist_len);
+
+ if (cmd->stop_src == TRIG_COUNT)
+ err |= cfc_check_trigger_arg_max(&cmd->stop_arg, 0x00ffffff);
+ else /* TRIG_NONE */
+ err |= cfc_check_trigger_arg_is(&cmd->stop_arg, 0);
if (err)
return 3;
@@ -1643,6 +1625,8 @@
static int s626_ai_cancel(struct comedi_device *dev, struct comedi_subdevice *s)
{
+ struct s626_private *devpriv = dev->private;
+
/* Stop RPS program in case it is currently running. */
MC_DISABLE(P_MC1, MC1_ERPS1);
@@ -1657,7 +1641,7 @@
static int s626_ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
-
+ struct s626_private *devpriv = dev->private;
int i;
uint16_t chan = CR_CHAN(insn->chanspec);
int16_t dacdata;
@@ -1676,6 +1660,7 @@
static int s626_ao_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
+ struct s626_private *devpriv = dev->private;
int i;
for (i = 0; i < insn->n; i++)
@@ -1974,6 +1959,7 @@
static void SetMode_A(struct comedi_device *dev, struct enc_private *k,
uint16_t Setup, uint16_t DisableIntSrc)
{
+ struct s626_private *devpriv = dev->private;
register uint16_t cra;
register uint16_t crb;
register uint16_t setup = Setup; /* Cache the Standard Setup. */
@@ -2032,6 +2018,7 @@
static void SetMode_B(struct comedi_device *dev, struct enc_private *k,
uint16_t Setup, uint16_t DisableIntSrc)
{
+ struct s626_private *devpriv = dev->private;
register uint16_t cra;
register uint16_t crb;
register uint16_t setup = Setup; /* Cache the Standard Setup. */
@@ -2165,6 +2152,8 @@
static void SetIntSrc_A(struct comedi_device *dev, struct enc_private *k,
uint16_t IntSource)
{
+ struct s626_private *devpriv = dev->private;
+
/* Reset any pending counter overflow or index captures. */
DEBIreplace(dev, k->MyCRB, (uint16_t) (~CRBMSK_INTCTRL),
CRBMSK_INTRESETCMD | CRBMSK_INTRESET_A);
@@ -2182,6 +2171,7 @@
static void SetIntSrc_B(struct comedi_device *dev, struct enc_private *k,
uint16_t IntSource)
{
+ struct s626_private *devpriv = dev->private;
uint16_t crb;
/* Cache writeable CRB register image. */
@@ -2412,6 +2402,7 @@
static int s626_allocate_dma_buffers(struct comedi_device *dev)
{
struct pci_dev *pcidev = comedi_to_pci_dev(dev);
+ struct s626_private *devpriv = dev->private;
void *addr;
dma_addr_t appdma;
@@ -2432,6 +2423,7 @@
static void s626_initialize(struct comedi_device *dev)
{
+ struct s626_private *devpriv = dev->private;
dma_addr_t pPhysBuf;
uint16_t chan;
int i;
@@ -2665,16 +2657,20 @@
/* writel(IRQ_GPIO3 | IRQ_RPS1, devpriv->base_addr + P_IER); */
}
-static int s626_attach_pci(struct comedi_device *dev, struct pci_dev *pcidev)
+static int s626_auto_attach(struct comedi_device *dev,
+ unsigned long context_unused)
{
+ struct pci_dev *pcidev = comedi_to_pci_dev(dev);
+ struct s626_private *devpriv;
struct comedi_subdevice *s;
int ret;
- comedi_set_hw_dev(dev, &pcidev->dev);
dev->board_name = dev->driver->driver_name;
- if (alloc_private(dev, sizeof(struct s626_private)) < 0)
+ devpriv = kzalloc(sizeof(*devpriv), GFP_KERNEL);
+ if (!devpriv)
return -ENOMEM;
+ dev->private = devpriv;
ret = comedi_pci_enable(pcidev, dev->board_name);
if (ret)
@@ -2794,6 +2790,7 @@
static void s626_detach(struct comedi_device *dev)
{
struct pci_dev *pcidev = comedi_to_pci_dev(dev);
+ struct s626_private *devpriv = dev->private;
if (devpriv) {
/* stop ai_command */
@@ -2829,17 +2826,17 @@
static struct comedi_driver s626_driver = {
.driver_name = "s626",
.module = THIS_MODULE,
- .attach_pci = s626_attach_pci,
+ .auto_attach = s626_auto_attach,
.detach = s626_detach,
};
-static int __devinit s626_pci_probe(struct pci_dev *dev,
+static int s626_pci_probe(struct pci_dev *dev,
const struct pci_device_id *ent)
{
return comedi_pci_auto_config(dev, &s626_driver);
}
-static void __devexit s626_pci_remove(struct pci_dev *dev)
+static void s626_pci_remove(struct pci_dev *dev)
{
comedi_pci_auto_unconfig(dev);
}
@@ -2860,7 +2857,7 @@
.name = "s626",
.id_table = s626_pci_table,
.probe = s626_pci_probe,
- .remove = __devexit_p(s626_pci_remove),
+ .remove = s626_pci_remove,
};
module_comedi_pci_driver(s626_driver, s626_pci_driver);
diff --git a/drivers/staging/comedi/drivers/serial2002.c b/drivers/staging/comedi/drivers/serial2002.c
index 5bf84cf..e6177b4 100644
--- a/drivers/staging/comedi/drivers/serial2002.c
+++ b/drivers/staging/comedi/drivers/serial2002.c
@@ -31,6 +31,8 @@
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include "../comedidev.h"
#include <linux/delay.h>
@@ -43,10 +45,6 @@
#include <linux/serial.h>
#include <linux/poll.h>
-struct serial2002_board {
- const char *name;
-};
-
struct serial2002_range_table_t {
/* HACK... */
@@ -68,12 +66,6 @@
struct serial2002_range_table_t in_range[32], out_range[32];
};
-/*
- * most drivers define the following macro to make it easy to
- * access the private structure.
- */
-#define devpriv ((struct serial2002_private *)dev->private)
-
struct serial_data {
enum { is_invalid, is_digital, is_channel } kind;
int index;
@@ -282,7 +274,7 @@
length++;
if (data < 0) {
- printk(KERN_ERR "serial2002 error\n");
+ pr_err("Failed to read serial.\n");
break;
} else if (data & 0x80) {
result.value = (result.value << 7) | (data & 0x7f);
@@ -348,6 +340,7 @@
static int serial_2002_open(struct comedi_device *dev)
{
+ struct serial2002_private *devpriv = dev->private;
int result;
char port[20];
@@ -355,7 +348,7 @@
devpriv->tty = filp_open(port, O_RDWR, 0);
if (IS_ERR(devpriv->tty)) {
result = (int)PTR_ERR(devpriv->tty);
- printk(KERN_ERR "serial_2002: file open error = %d\n", result);
+ dev_err(dev->class_dev, "file open error = %d\n", result);
} else {
struct config_t {
@@ -655,6 +648,8 @@
static void serial_2002_close(struct comedi_device *dev)
{
+ struct serial2002_private *devpriv = dev->private;
+
if (!IS_ERR(devpriv->tty) && devpriv->tty)
filp_close(devpriv->tty, NULL);
}
@@ -663,6 +658,7 @@
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
+ struct serial2002_private *devpriv = dev->private;
int n;
int chan;
@@ -685,6 +681,7 @@
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
+ struct serial2002_private *devpriv = dev->private;
int n;
int chan;
@@ -704,6 +701,7 @@
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
+ struct serial2002_private *devpriv = dev->private;
int n;
int chan;
@@ -726,6 +724,7 @@
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
+ struct serial2002_private *devpriv = dev->private;
int n;
int chan;
@@ -746,6 +745,7 @@
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
+ struct serial2002_private *devpriv = dev->private;
int n;
int chan = CR_CHAN(insn->chanspec);
@@ -759,6 +759,7 @@
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
+ struct serial2002_private *devpriv = dev->private;
int n;
int chan;
@@ -780,14 +781,18 @@
static int serial2002_attach(struct comedi_device *dev,
struct comedi_devconfig *it)
{
- const struct serial2002_board *board = comedi_board(dev);
+ struct serial2002_private *devpriv;
struct comedi_subdevice *s;
int ret;
dev_dbg(dev->class_dev, "serial2002: attach\n");
- dev->board_name = board->name;
- if (alloc_private(dev, sizeof(struct serial2002_private)) < 0)
+ dev->board_name = dev->driver->driver_name;
+
+ devpriv = kzalloc(sizeof(*devpriv), GFP_KERNEL);
+ if (!devpriv)
return -ENOMEM;
+ dev->private = devpriv;
+
dev->open = serial_2002_open;
dev->close = serial_2002_close;
devpriv->port = it->options[0];
@@ -860,20 +865,11 @@
}
}
-static const struct serial2002_board serial2002_boards[] = {
- {
- .name = "serial2002"
- },
-};
-
static struct comedi_driver serial2002_driver = {
.driver_name = "serial2002",
.module = THIS_MODULE,
.attach = serial2002_attach,
.detach = serial2002_detach,
- .board_name = &serial2002_boards[0].name,
- .offset = sizeof(struct serial2002_board),
- .num_names = ARRAY_SIZE(serial2002_boards),
};
module_comedi_driver(serial2002_driver);
diff --git a/drivers/staging/comedi/drivers/skel.c b/drivers/staging/comedi/drivers/skel.c
index b70cdf3..e2d7970 100644
--- a/drivers/staging/comedi/drivers/skel.c
+++ b/drivers/staging/comedi/drivers/skel.c
@@ -92,6 +92,7 @@
*/
struct skel_board {
const char *name;
+ unsigned int devid;
int ai_chans;
int ai_bits;
int have_dio;
@@ -100,36 +101,20 @@
static const struct skel_board skel_boards[] = {
{
.name = "skel-100",
+ .devid = 0x100,
.ai_chans = 16,
.ai_bits = 12,
.have_dio = 1,
},
{
.name = "skel-200",
+ .devid = 0x200,
.ai_chans = 8,
.ai_bits = 16,
.have_dio = 0,
},
};
-/* This is used by modprobe to translate PCI IDs to drivers. Should
- * only be used for PCI and ISA-PnP devices */
-/* Please add your PCI vendor ID to comedidev.h, and it will be forwarded
- * upstream. */
-#define PCI_VENDOR_ID_SKEL 0xdafe
-static DEFINE_PCI_DEVICE_TABLE(skel_pci_table) = {
- { PCI_DEVICE(PCI_VENDOR_ID_SKEL, 0x0100) },
- { PCI_DEVICE(PCI_VENDOR_ID_SKEL, 0x0200) },
- { 0 }
-};
-
-MODULE_DEVICE_TABLE(pci, skel_pci_table);
-
-/*
- * Useful for shorthand access to the particular board structure
- */
-#define thisboard ((const struct skel_board *)dev->board_ptr)
-
/* this structure is for data unique to this hardware driver. If
several hardware drivers keep similar information in this structure,
feel free to suggest moving the variable to the struct comedi_device struct.
@@ -138,165 +123,25 @@
int data;
- /* would be useful for a PCI device */
- struct pci_dev *pci_dev;
-
/* Used for AO readback */
unsigned int ao_readback[2];
};
-/*
- * most drivers define the following macro to make it easy to
- * access the private structure.
- */
-#define devpriv ((struct skel_private *)dev->private)
-
-/*
- * The struct comedi_driver structure tells the Comedi core module
- * which functions to call to configure/deconfigure (attach/detach)
- * the board, and also about the kernel module that contains
- * the device code.
- */
-static int skel_attach(struct comedi_device *dev, struct comedi_devconfig *it);
-static void skel_detach(struct comedi_device *dev);
-static struct comedi_driver driver_skel = {
- .driver_name = "dummy",
- .module = THIS_MODULE,
- .attach = skel_attach,
- .detach = skel_detach,
-/* It is not necessary to implement the following members if you are
- * writing a driver for a ISA PnP or PCI card */
- /* Most drivers will support multiple types of boards by
- * having an array of board structures. These were defined
- * in skel_boards[] above. Note that the element 'name'
- * was first in the structure -- Comedi uses this fact to
- * extract the name of the board without knowing any details
- * about the structure except for its length.
- * When a device is attached (by comedi_config), the name
- * of the device is given to Comedi, and Comedi tries to
- * match it by going through the list of board names. If
- * there is a match, the address of the pointer is put
- * into dev->board_ptr and driver->attach() is called.
- *
- * Note that these are not necessary if you can determine
- * the type of board in software. ISA PnP, PCI, and PCMCIA
- * devices are such boards.
+/* This function doesn't require a particular form, this is just
+ * what happens to be used in some of the drivers. It should
+ * convert ns nanoseconds to a counter value suitable for programming
+ * the device. Also, it should adjust ns so that it cooresponds to
+ * the actual time that the device will use. */
+static int skel_ns_to_timer(unsigned int *ns, int round)
+{
+ /* trivial timer */
+ /* if your timing is done through two cascaded timers, the
+ * i8253_cascade_ns_to_timer() function in 8253.h can be
+ * very helpful. There are also i8254_load() and i8254_mm_load()
+ * which can be used to load values into the ubiquitous 8254 counters
*/
- .board_name = &skel_boards[0].name,
- .offset = sizeof(struct skel_board),
- .num_names = ARRAY_SIZE(skel_boards),
-};
-static int skel_ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-static int skel_ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-static int skel_ao_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-static int skel_dio_insn_bits(struct comedi_device *dev,
- struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-static int skel_dio_insn_config(struct comedi_device *dev,
- struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data);
-static int skel_ai_cmdtest(struct comedi_device *dev,
- struct comedi_subdevice *s, struct comedi_cmd *cmd);
-static int skel_ns_to_timer(unsigned int *ns, int round);
-
-/*
- * Attach is called by the Comedi core to configure the driver
- * for a particular board. If you specified a board_name array
- * in the driver structure, dev->board_ptr contains that
- * address.
- */
-static int skel_attach(struct comedi_device *dev, struct comedi_devconfig *it)
-{
- struct comedi_subdevice *s;
- int ret;
-
- pr_info("comedi%d: skel: ", dev->minor);
-
-/*
- * If you can probe the device to determine what device in a series
- * it is, this is the place to do it. Otherwise, dev->board_ptr
- * should already be initialized.
- */
- /* dev->board_ptr = skel_probe(dev, it); */
-
-/*
- * Initialize dev->board_name. Note that we can use the "thisboard"
- * macro now, since we just initialized it in the last line.
- */
- dev->board_name = thisboard->name;
-
-/*
- * Allocate the private structure area. alloc_private() is a
- * convenient macro defined in comedidev.h.
- */
- if (alloc_private(dev, sizeof(struct skel_private)) < 0)
- return -ENOMEM;
-
- ret = comedi_alloc_subdevices(dev, 3);
- if (ret)
- return ret;
-
- s = &dev->subdevices[0];
- /* dev->read_subdev=s; */
- /* analog input subdevice */
- s->type = COMEDI_SUBD_AI;
- /* we support single-ended (ground) and differential */
- s->subdev_flags = SDF_READABLE | SDF_GROUND | SDF_DIFF;
- s->n_chan = thisboard->ai_chans;
- s->maxdata = (1 << thisboard->ai_bits) - 1;
- s->range_table = &range_bipolar10;
- s->len_chanlist = 16; /* This is the maximum chanlist length that
- the board can handle */
- s->insn_read = skel_ai_rinsn;
-/*
-* s->subdev_flags |= SDF_CMD_READ;
-* s->do_cmd = skel_ai_cmd;
-*/
- s->do_cmdtest = skel_ai_cmdtest;
-
- s = &dev->subdevices[1];
- /* analog output subdevice */
- s->type = COMEDI_SUBD_AO;
- s->subdev_flags = SDF_WRITABLE;
- s->n_chan = 1;
- s->maxdata = 0xffff;
- s->range_table = &range_bipolar5;
- s->insn_write = skel_ao_winsn;
- s->insn_read = skel_ao_rinsn;
-
- s = &dev->subdevices[2];
- /* digital i/o subdevice */
- if (thisboard->have_dio) {
- s->type = COMEDI_SUBD_DIO;
- s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
- s->n_chan = 16;
- s->maxdata = 1;
- s->range_table = &range_digital;
- s->insn_bits = skel_dio_insn_bits;
- s->insn_config = skel_dio_insn_config;
- } else {
- s->type = COMEDI_SUBD_UNUSED;
- }
-
- pr_info("attached\n");
-
- return 0;
-}
-
-/*
- * _detach is called to deconfigure a device. It should deallocate
- * resources.
- * This function is also called when _attach() fails, so it should be
- * careful not to release resources that were not necessarily
- * allocated by _attach(). dev->private and dev->subdevices are
- * deallocated automatically by the core.
- */
-static void skel_detach(struct comedi_device *dev)
-{
+ return *ns;
}
/*
@@ -306,6 +151,7 @@
static int skel_ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
+ const struct skel_board *thisboard = comedi_board(dev);
int n, i;
unsigned int d;
unsigned int status;
@@ -331,9 +177,7 @@
break;
}
if (i == TIMEOUT) {
- /* printk() should be used instead of printk()
- * whenever the code can be called from real-time. */
- pr_info("timeout\n");
+ dev_warn(dev->class_dev, "ai timeout\n");
return -ETIMEDOUT;
}
@@ -389,67 +233,40 @@
if (err)
return 2;
- /* step 3: make sure arguments are trivially compatible */
+ /* Step 3: check if arguments are trivially valid */
- if (cmd->start_arg != 0) {
- cmd->start_arg = 0;
- err++;
- }
+ err |= cfc_check_trigger_arg_is(&cmd->start_arg, 0);
+
#define MAX_SPEED 10000 /* in nanoseconds */
#define MIN_SPEED 1000000000 /* in nanoseconds */
if (cmd->scan_begin_src == TRIG_TIMER) {
- if (cmd->scan_begin_arg < MAX_SPEED) {
- cmd->scan_begin_arg = MAX_SPEED;
- err++;
- }
- if (cmd->scan_begin_arg > MIN_SPEED) {
- cmd->scan_begin_arg = MIN_SPEED;
- err++;
- }
+ err |= cfc_check_trigger_arg_min(&cmd->scan_begin_arg,
+ MAX_SPEED);
+ err |= cfc_check_trigger_arg_max(&cmd->scan_begin_arg,
+ MIN_SPEED);
} else {
/* external trigger */
/* should be level/edge, hi/lo specification here */
/* should specify multiple external triggers */
- if (cmd->scan_begin_arg > 9) {
- cmd->scan_begin_arg = 9;
- err++;
- }
+ err |= cfc_check_trigger_arg_max(&cmd->scan_begin_arg, 9);
}
+
if (cmd->convert_src == TRIG_TIMER) {
- if (cmd->convert_arg < MAX_SPEED) {
- cmd->convert_arg = MAX_SPEED;
- err++;
- }
- if (cmd->convert_arg > MIN_SPEED) {
- cmd->convert_arg = MIN_SPEED;
- err++;
- }
+ err |= cfc_check_trigger_arg_min(&cmd->convert_arg, MAX_SPEED);
+ err |= cfc_check_trigger_arg_max(&cmd->convert_arg, MIN_SPEED);
} else {
/* external trigger */
/* see above */
- if (cmd->convert_arg > 9) {
- cmd->convert_arg = 9;
- err++;
- }
+ err |= cfc_check_trigger_arg_max(&cmd->scan_begin_arg, 9);
}
- if (cmd->scan_end_arg != cmd->chanlist_len) {
- cmd->scan_end_arg = cmd->chanlist_len;
- err++;
- }
- if (cmd->stop_src == TRIG_COUNT) {
- if (cmd->stop_arg > 0x00ffffff) {
- cmd->stop_arg = 0x00ffffff;
- err++;
- }
- } else {
- /* TRIG_NONE */
- if (cmd->stop_arg != 0) {
- cmd->stop_arg = 0;
- err++;
- }
- }
+ err |= cfc_check_trigger_arg_is(&cmd->scan_end_arg, cmd->chanlist_len);
+
+ if (cmd->stop_src == TRIG_COUNT)
+ err |= cfc_check_trigger_arg_max(&cmd->stop_arg, 0x00ffffff);
+ else /* TRIG_NONE */
+ err |= cfc_check_trigger_arg_is(&cmd->stop_arg, 0);
if (err)
return 3;
@@ -484,30 +301,13 @@
return 0;
}
-/* This function doesn't require a particular form, this is just
- * what happens to be used in some of the drivers. It should
- * convert ns nanoseconds to a counter value suitable for programming
- * the device. Also, it should adjust ns so that it cooresponds to
- * the actual time that the device will use. */
-static int skel_ns_to_timer(unsigned int *ns, int round)
-{
- /* trivial timer */
- /* if your timing is done through two cascaded timers, the
- * i8253_cascade_ns_to_timer() function in 8253.h can be
- * very helpful. There are also i8254_load() and i8254_mm_load()
- * which can be used to load values into the ubiquitous 8254 counters
- */
-
- return *ns;
-}
-
static int skel_ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
+ struct skel_private *devpriv = dev->private;
int i;
int chan = CR_CHAN(insn->chanspec);
- pr_info("skel_ao_winsn\n");
/* Writing a list of values to an AO channel is probably not
* very useful, but that's how the interface is defined. */
for (i = 0; i < insn->n; i++) {
@@ -525,6 +325,7 @@
static int skel_ao_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
+ struct skel_private *devpriv = dev->private;
int i;
int chan = CR_CHAN(insn->chanspec);
@@ -593,57 +394,332 @@
return insn->n;
}
-#ifdef CONFIG_COMEDI_PCI_DRIVERS
-static int __devinit driver_skel_pci_probe(struct pci_dev *dev,
- const struct pci_device_id *ent)
+static const struct skel_board *skel_find_pci_board(struct pci_dev *pcidev)
{
- return comedi_pci_auto_config(dev, &driver_skel);
+ unsigned int i;
+
+/*
+ * This example code assumes all the entries in skel_boards[] are PCI boards
+ * and all use the same PCI vendor ID. If skel_boards[] contains a mixture
+ * of PCI and non-PCI boards, this loop should skip over the non-PCI boards.
+ */
+ for (i = 0; i < ARRAY_SIZE(skel_boards); i++)
+ if (/* skel_boards[i].bustype == pci_bustype && */
+ pcidev->device == skel_boards[i].devid)
+ return &skel_boards[i];
+ return NULL;
}
-static void __devexit driver_skel_pci_remove(struct pci_dev *dev)
+/*
+ * Handle common part of skel_attach() and skel_auto_attach().
+ */
+static int skel_common_attach(struct comedi_device *dev)
+{
+ const struct skel_board *thisboard = comedi_board(dev);
+ struct comedi_subdevice *s;
+ int ret;
+
+ ret = comedi_alloc_subdevices(dev, 3);
+ if (ret)
+ return ret;
+
+ s = &dev->subdevices[0];
+ /* dev->read_subdev=s; */
+ /* analog input subdevice */
+ s->type = COMEDI_SUBD_AI;
+ /* we support single-ended (ground) and differential */
+ s->subdev_flags = SDF_READABLE | SDF_GROUND | SDF_DIFF;
+ s->n_chan = thisboard->ai_chans;
+ s->maxdata = (1 << thisboard->ai_bits) - 1;
+ s->range_table = &range_bipolar10;
+ s->len_chanlist = 16; /* This is the maximum chanlist length that
+ the board can handle */
+ s->insn_read = skel_ai_rinsn;
+/*
+* s->subdev_flags |= SDF_CMD_READ;
+* s->do_cmd = skel_ai_cmd;
+*/
+ s->do_cmdtest = skel_ai_cmdtest;
+
+ s = &dev->subdevices[1];
+ /* analog output subdevice */
+ s->type = COMEDI_SUBD_AO;
+ s->subdev_flags = SDF_WRITABLE;
+ s->n_chan = 1;
+ s->maxdata = 0xffff;
+ s->range_table = &range_bipolar5;
+ s->insn_write = skel_ao_winsn;
+ s->insn_read = skel_ao_rinsn;
+
+ s = &dev->subdevices[2];
+ /* digital i/o subdevice */
+ if (thisboard->have_dio) {
+ s->type = COMEDI_SUBD_DIO;
+ s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
+ s->n_chan = 16;
+ s->maxdata = 1;
+ s->range_table = &range_digital;
+ s->insn_bits = skel_dio_insn_bits;
+ s->insn_config = skel_dio_insn_config;
+ } else {
+ s->type = COMEDI_SUBD_UNUSED;
+ }
+
+ dev_info(dev->class_dev, "skel: attached\n");
+
+ return 0;
+}
+
+/*
+ * _attach is called by the Comedi core to configure the driver
+ * for a particular board in response to the COMEDI_DEVCONFIG ioctl for
+ * a matching board or driver name. If you specified a board_name array
+ * in the driver structure, dev->board_ptr contains that address.
+ *
+ * Drivers that handle only PCI or USB devices do not usually support
+ * manual attachment of those devices via the COMEDI_DEVCONFIG ioctl, so
+ * those drivers do not have an _attach function; they just have an
+ * _auto_attach function instead. (See skel_auto_attach() for an example
+ * of such a function.)
+ */
+static int skel_attach(struct comedi_device *dev, struct comedi_devconfig *it)
+{
+ const struct skel_board *thisboard;
+ struct skel_private *devpriv;
+
+/*
+ * If you can probe the device to determine what device in a series
+ * it is, this is the place to do it. Otherwise, dev->board_ptr
+ * should already be initialized.
+ */
+ /* dev->board_ptr = skel_probe(dev, it); */
+
+ thisboard = comedi_board(dev);
+
+/*
+ * Initialize dev->board_name.
+ */
+ dev->board_name = thisboard->name;
+
+ /* Allocate the private data */
+ devpriv = kzalloc(sizeof(*devpriv), GFP_KERNEL);
+ if (!devpriv)
+ return -ENOMEM;
+ dev->private = devpriv;
+
+/*
+ * Supported boards are usually either auto-attached via the
+ * Comedi driver's _auto_attach routine, or manually attached via the
+ * Comedi driver's _attach routine. In most cases, attempts to
+ * manual attach boards that are usually auto-attached should be
+ * rejected by this function.
+ */
+/*
+ * if (thisboard->bustype == pci_bustype) {
+ * dev_err(dev->class_dev,
+ * "Manual attachment of PCI board '%s' not supported\n",
+ * thisboard->name);
+ * }
+ */
+
+/*
+ * For ISA boards, get the i/o base address from it->options[],
+ * request the i/o region and set dev->iobase * from it->options[].
+ * If using interrupts, get the IRQ number from it->options[].
+ */
+
+ /*
+ * Call a common function to handle the remaining things to do for
+ * attaching ISA or PCI boards. (Extra parameters could be added
+ * to pass additional information such as IRQ number.)
+ */
+ return skel_common_attach(dev);
+}
+
+/*
+ * _auto_attach is called via comedi_pci_auto_config() (or
+ * comedi_usb_auto_config(), etc.) to handle devices that can be attached
+ * to the Comedi core automatically without the COMEDI_DEVCONFIG ioctl.
+ *
+ * The context parameter is usually unused, but if the driver called
+ * comedi_auto_config() directly instead of the comedi_pci_auto_config()
+ * wrapper function, this will be a copy of the context passed to
+ * comedi_auto_config().
+ */
+static int skel_auto_attach(struct comedi_device *dev,
+ unsigned long context)
+{
+ struct pci_dev *pcidev = comedi_to_pci_dev(dev);
+ const struct skel_board *thisboard;
+ struct skel_private *devpriv;
+ int ret;
+
+ /* Hack to allow unused code to be optimized out. */
+ if (!IS_ENABLED(CONFIG_COMEDI_PCI_DRIVERS))
+ return -EINVAL;
+
+ /* Find a matching board in skel_boards[]. */
+ thisboard = skel_find_pci_board(pcidev);
+ if (!thisboard) {
+ dev_err(dev->class_dev, "BUG! cannot determine board type!\n");
+ return -EINVAL;
+ }
+
+ /*
+ * Point the struct comedi_device to the matching board info
+ * and set the board name.
+ */
+ dev->board_ptr = thisboard;
+ dev->board_name = thisboard->name;
+
+ /* Allocate the private data */
+ devpriv = kzalloc(sizeof(*devpriv), GFP_KERNEL);
+ if (!devpriv)
+ return -ENOMEM;
+ dev->private = devpriv;
+
+ /* Enable the PCI device. */
+ ret = comedi_pci_enable(pcidev, dev->board_name);
+ if (ret)
+ return ret;
+
+ /*
+ * Record the fact that the PCI device is enabled so that it can
+ * be disabled during _detach().
+ *
+ * For this example driver, we assume PCI BAR 0 is the main I/O
+ * region for the board registers and use dev->iobase to hold the
+ * I/O base address and to indicate that the PCI device has been
+ * enabled.
+ *
+ * (For boards with memory-mapped registers, dev->iobase is not
+ * usually needed for register access, so can just be set to 1
+ * to indicate that the PCI device has been enabled.)
+ */
+ dev->iobase = pci_resource_start(pcidev, 0);
+
+ /*
+ * Call a common function to handle the remaining things to do for
+ * attaching ISA or PCI boards. (Extra parameters could be added
+ * to pass additional information such as IRQ number.)
+ */
+ return skel_common_attach(dev);
+}
+
+/*
+ * _detach is called to deconfigure a device. It should deallocate
+ * resources.
+ * This function is also called when _attach() fails, so it should be
+ * careful not to release resources that were not necessarily
+ * allocated by _attach(). dev->private and dev->subdevices are
+ * deallocated automatically by the core.
+ */
+static void skel_detach(struct comedi_device *dev)
+{
+ const struct skel_board *thisboard = comedi_board(dev);
+ struct skel_private *devpriv = dev->private;
+ struct pci_dev *pcidev = comedi_to_pci_dev(dev);
+
+ if (!thisboard || !devpriv)
+ return;
+
+/*
+ * Do common stuff such as freeing IRQ, unmapping remapped memory
+ * regions, etc., being careful to check that the stuff is valid given
+ * that _detach() is called even when _attach() or _auto_attach() return
+ * an error.
+ */
+
+ if (IS_ENABLED(CONFIG_COMEDI_PCI_DRIVERS) /* &&
+ thisboard->bustype == pci_bustype */) {
+ /*
+ * PCI board
+ *
+ * If PCI device enabled by _auto_attach() (or _attach()),
+ * disable it here.
+ */
+ if (pcidev && dev->iobase)
+ comedi_pci_disable(pcidev);
+ } else {
+ /*
+ * ISA board
+ *
+ * If I/O regions successfully requested by _attach(),
+ * release them here.
+ */
+ if (dev->iobase)
+ release_region(dev->iobase, SKEL_SIZE);
+ }
+}
+
+/*
+ * The struct comedi_driver structure tells the Comedi core module
+ * which functions to call to configure/deconfigure (attach/detach)
+ * the board, and also about the kernel module that contains
+ * the device code.
+ */
+static struct comedi_driver skel_driver = {
+ .driver_name = "dummy",
+ .module = THIS_MODULE,
+ .attach = skel_attach,
+ .auto_attach = skel_auto_attach,
+ .detach = skel_detach,
+/* It is not necessary to implement the following members if you are
+ * writing a driver for a ISA PnP or PCI card */
+ /* Most drivers will support multiple types of boards by
+ * having an array of board structures. These were defined
+ * in skel_boards[] above. Note that the element 'name'
+ * was first in the structure -- Comedi uses this fact to
+ * extract the name of the board without knowing any details
+ * about the structure except for its length.
+ * When a device is attached (by comedi_config), the name
+ * of the device is given to Comedi, and Comedi tries to
+ * match it by going through the list of board names. If
+ * there is a match, the address of the pointer is put
+ * into dev->board_ptr and driver->attach() is called.
+ *
+ * Note that these are not necessary if you can determine
+ * the type of board in software. ISA PnP, PCI, and PCMCIA
+ * devices are such boards.
+ */
+ .board_name = &skel_boards[0].name,
+ .offset = sizeof(struct skel_board),
+ .num_names = ARRAY_SIZE(skel_boards),
+};
+
+#ifdef CONFIG_COMEDI_PCI_DRIVERS
+
+/* This is used by modprobe to translate PCI IDs to drivers. Should
+ * only be used for PCI and ISA-PnP devices */
+/* Please add your PCI vendor ID to comedidev.h, and it will be forwarded
+ * upstream. */
+#define PCI_VENDOR_ID_SKEL 0xdafe
+static DEFINE_PCI_DEVICE_TABLE(skel_pci_table) = {
+ { PCI_DEVICE(PCI_VENDOR_ID_SKEL, 0x0100) },
+ { PCI_DEVICE(PCI_VENDOR_ID_SKEL, 0x0200) },
+ { 0 }
+};
+MODULE_DEVICE_TABLE(pci, skel_pci_table);
+
+static int skel_pci_probe(struct pci_dev *dev,
+ const struct pci_device_id *ent)
+{
+ return comedi_pci_auto_config(dev, &skel_driver);
+}
+
+static void skel_pci_remove(struct pci_dev *dev)
{
comedi_pci_auto_unconfig(dev);
}
-static struct pci_driver driver_skel_pci_driver = {
+static struct pci_driver skel_pci_driver = {
.id_table = skel_pci_table,
- .probe = &driver_skel_pci_probe,
- .remove = __devexit_p(&driver_skel_pci_remove)
+ .probe = &skel_pci_probe,
+ .remove = &skel_pci_remove
};
-
-static int __init driver_skel_init_module(void)
-{
- int retval;
-
- retval = comedi_driver_register(&driver_skel);
- if (retval < 0)
- return retval;
-
- driver_skel_pci_driver.name = (char *)driver_skel.driver_name;
- return pci_register_driver(&driver_skel_pci_driver);
-}
-
-static void __exit driver_skel_cleanup_module(void)
-{
- pci_unregister_driver(&driver_skel_pci_driver);
- comedi_driver_unregister(&driver_skel);
-}
-
-module_init(driver_skel_init_module);
-module_exit(driver_skel_cleanup_module);
+module_comedi_pci_driver(skel_driver, skel_pci_driver);
#else
-static int __init driver_skel_init_module(void)
-{
- return comedi_driver_register(&driver_skel);
-}
-
-static void __exit driver_skel_cleanup_module(void)
-{
- comedi_driver_unregister(&driver_skel);
-}
-
-module_init(driver_skel_init_module);
-module_exit(driver_skel_cleanup_module);
+module_comedi_driver(skel_driver);
#endif
MODULE_AUTHOR("Comedi http://www.comedi.org");
diff --git a/drivers/staging/comedi/drivers/ssv_dnp.c b/drivers/staging/comedi/drivers/ssv_dnp.c
index ae3aa1c..afa4016 100644
--- a/drivers/staging/comedi/drivers/ssv_dnp.c
+++ b/drivers/staging/comedi/drivers/ssv_dnp.c
@@ -50,15 +50,6 @@
#define PCMR 0xa3 /* Port C Mode Register */
#define PCDR 0xa7 /* Port C Data Register */
-/* This data structure holds information about the supported boards -------- */
-
-struct dnp_board {
- const char *name;
- int ai_chans;
- int ai_bits;
- int have_dio;
-};
-
/* ------------------------------------------------------------------------- */
/* The insn_bits interface allows packed reading/writing of DIO channels. */
/* The comedi core can convert between insn_bits and insn_read/write, so you */
@@ -173,11 +164,10 @@
static int dnp_attach(struct comedi_device *dev, struct comedi_devconfig *it)
{
- const struct dnp_board *board = comedi_board(dev);
struct comedi_subdevice *s;
int ret;
- dev->board_name = board->name;
+ dev->board_name = dev->driver->driver_name;
ret = comedi_alloc_subdevices(dev, 1);
if (ret)
@@ -219,23 +209,11 @@
outb((inb(CSCDR) & 0xAA), CSCDR);
}
-static const struct dnp_board dnp_boards[] = {
- {
- .name = "dnp-1486",
- .ai_chans = 16,
- .ai_bits = 12,
- .have_dio = 1,
- },
-};
-
static struct comedi_driver dnp_driver = {
- .driver_name = "ssv_dnp",
+ .driver_name = "dnp-1486",
.module = THIS_MODULE,
.attach = dnp_attach,
.detach = dnp_detach,
- .board_name = &dnp_boards[0].name,
- .offset = sizeof(struct dnp_board),
- .num_names = ARRAY_SIZE(dnp_boards),
};
module_comedi_driver(dnp_driver);
diff --git a/drivers/staging/comedi/drivers/unioxx5.c b/drivers/staging/comedi/drivers/unioxx5.c
index 9f1fdec..c9ded93 100644
--- a/drivers/staging/comedi/drivers/unioxx5.c
+++ b/drivers/staging/comedi/drivers/unioxx5.c
@@ -42,6 +42,8 @@
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include "../comedidev.h"
#include <linux/ioport.h>
#include <linux/slab.h>
@@ -144,8 +146,7 @@
channel_offset = __unioxx5_define_chan_offset(channel);
if (channel_offset < 0) {
- printk(KERN_ERR
- "comedi%d: undefined channel %d. channel range is 0 .. 23\n",
+ pr_err("comedi%d: undefined channel %d. channel range is 0 .. 23\n",
minor, channel);
return 0;
}
@@ -171,8 +172,7 @@
/* defining if given module can work on input */
if (usp->usp_module_type[module_no] & MODULE_OUTPUT_MASK) {
- printk(KERN_ERR
- "comedi%d: module in position %d with id 0x%02x is for output only",
+ pr_err("comedi%d: module in position %d with id 0x%02x is for output only",
minor, module_no, usp->usp_module_type[module_no]);
return 0;
}
@@ -209,8 +209,7 @@
channel_offset = __unioxx5_define_chan_offset(channel);
if (channel_offset < 0) {
- printk(KERN_ERR
- "comedi%d: undefined channel %d. channel range is 0 .. 23\n",
+ pr_err("comedi%d: undefined channel %d. channel range is 0 .. 23\n",
minor, channel);
return 0;
}
@@ -240,8 +239,7 @@
/* defining if given module can work on output */
if (!(usp->usp_module_type[module] & MODULE_OUTPUT_MASK)) {
- printk(KERN_ERR
- "comedi%d: module in position %d with id 0x%0x is for input only!\n",
+ pr_err("comedi%d: module in position %d with id 0x%0x is for input only!\n",
minor, module, usp->usp_module_type[module]);
return 0;
}
@@ -323,17 +321,17 @@
type = usp->usp_module_type[channel / 2];
if (type != MODULE_DIGITAL) {
- printk(KERN_ERR
- "comedi%d: channel configuration accessible only for digital modules\n",
- dev->minor);
+ dev_err(dev->class_dev,
+ "comedi%d: channel configuration accessible only for digital modules\n",
+ dev->minor);
return -1;
}
channel_offset = __unioxx5_define_chan_offset(channel);
if (channel_offset < 0) {
- printk(KERN_ERR
- "comedi%d: undefined channel %d. channel range is 0 .. 23\n",
- dev->minor, channel);
+ dev_err(dev->class_dev,
+ "comedi%d: undefined channel %d. channel range is 0 .. 23\n",
+ dev->minor, channel);
return -1;
}
@@ -348,7 +346,8 @@
flags |= mask;
break;
default:
- printk(KERN_ERR "comedi%d: unknown flag\n", dev->minor);
+ dev_err(dev->class_dev,
+ "comedi%d: unknown flag\n", dev->minor);
return -1;
}
@@ -375,19 +374,21 @@
int i, to, ndef_flag = 0;
if (!request_region(subdev_iobase, UNIOXX5_SIZE, DRIVER_NAME)) {
- printk(KERN_ERR "comedi%d: I/O port conflict\n", minor);
+ dev_err(subdev->class_dev,
+ "comedi%d: I/O port conflict\n", minor);
return -EIO;
}
usp = kzalloc(sizeof(*usp), GFP_KERNEL);
if (usp == NULL) {
- printk(KERN_ERR "comedi%d: error! --> out of memory!\n", minor);
+ dev_err(subdev->class_dev,
+ "comedi%d: error! --> out of memory!\n", minor);
return -1;
}
usp->usp_iobase = subdev_iobase;
- printk(KERN_INFO "comedi%d: |", minor);
+ dev_info(subdev->class_dev, "comedi%d: |", minor);
/* defining modules types */
for (i = 0; i < 12; i++) {
@@ -433,8 +434,6 @@
/* for digital modules only!!! */
subdev->insn_config = unioxx5_insn_config;
- printk(KERN_INFO "subdevice configured\n");
-
return 0;
}
@@ -464,8 +463,8 @@
/* unioxx5 can has from two to four subdevices */
if (n_subd < 2) {
- printk(KERN_ERR
- "your card must has at least 2 'g01' subdevices\n");
+ dev_err(dev->class_dev,
+ "your card must has at least 2 'g01' subdevices\n");
return -1;
}
@@ -480,7 +479,6 @@
return -1;
}
- printk(KERN_INFO "attached\n");
return 0;
}
diff --git a/drivers/staging/comedi/drivers/usbdux.c b/drivers/staging/comedi/drivers/usbdux.c
index b536bba..78f3a2e 100644
--- a/drivers/staging/comedi/drivers/usbdux.c
+++ b/drivers/staging/comedi/drivers/usbdux.c
@@ -938,9 +938,6 @@
if (!(this_usbduxsub->probed))
return -ENODEV;
- dev_dbg(&this_usbduxsub->interface->dev,
- "comedi%d: usbdux_ai_cmdtest\n", dev->minor);
-
/* Step 1 : check if triggers are trivially valid */
err |= cfc_check_trigger_src(&cmd->start_src, TRIG_NOW | TRIG_INT);
@@ -962,19 +959,12 @@
if (err)
return 2;
- /* step 3: make sure arguments are trivially compatible */
- if (cmd->start_arg != 0) {
- cmd->start_arg = 0;
- err++;
- }
+ /* Step 3: check if arguments are trivially valid */
- if (cmd->scan_begin_src == TRIG_FOLLOW) {
- /* internal trigger */
- if (cmd->scan_begin_arg != 0) {
- cmd->scan_begin_arg = 0;
- err++;
- }
- }
+ err |= cfc_check_trigger_arg_is(&cmd->start_arg, 0);
+
+ if (cmd->scan_begin_src == TRIG_FOLLOW) /* internal trigger */
+ err |= cfc_check_trigger_arg_is(&cmd->scan_begin_arg, 0);
if (cmd->scan_begin_src == TRIG_TIMER) {
if (this_usbduxsub->high_speed) {
@@ -989,51 +979,35 @@
while (i < (cmd->chanlist_len))
i = i * 2;
- if (cmd->scan_begin_arg < (1000000 / 8 * i)) {
- cmd->scan_begin_arg = 1000000 / 8 * i;
- err++;
- }
+ err |= cfc_check_trigger_arg_min(&cmd->scan_begin_arg,
+ 1000000 / 8 * i);
/* now calc the real sampling rate with all the
* rounding errors */
tmpTimer =
((unsigned int)(cmd->scan_begin_arg / 125000)) *
125000;
- if (cmd->scan_begin_arg != tmpTimer) {
- cmd->scan_begin_arg = tmpTimer;
- err++;
- }
} else {
/* full speed */
/* 1kHz scans every USB frame */
- if (cmd->scan_begin_arg < 1000000) {
- cmd->scan_begin_arg = 1000000;
- err++;
- }
+ err |= cfc_check_trigger_arg_min(&cmd->scan_begin_arg,
+ 1000000);
/*
* calc the real sampling rate with the rounding errors
*/
tmpTimer = ((unsigned int)(cmd->scan_begin_arg /
1000000)) * 1000000;
- if (cmd->scan_begin_arg != tmpTimer) {
- cmd->scan_begin_arg = tmpTimer;
- err++;
- }
}
+ err |= cfc_check_trigger_arg_is(&cmd->scan_begin_arg,
+ tmpTimer);
}
- /* the same argument */
- if (cmd->scan_end_arg != cmd->chanlist_len) {
- cmd->scan_end_arg = cmd->chanlist_len;
- err++;
- }
+
+ err |= cfc_check_trigger_arg_is(&cmd->scan_end_arg, cmd->chanlist_len);
if (cmd->stop_src == TRIG_COUNT) {
/* any count is allowed */
} else {
/* TRIG_NONE */
- if (cmd->stop_arg != 0) {
- cmd->stop_arg = 0;
- err++;
- }
+ err |= cfc_check_trigger_arg_is(&cmd->stop_arg, 0);
}
if (err)
@@ -1472,9 +1446,6 @@
if (!(this_usbduxsub->probed))
return -ENODEV;
- dev_dbg(&this_usbduxsub->interface->dev,
- "comedi%d: usbdux_ao_cmdtest\n", dev->minor);
-
/* Step 1 : check if triggers are trivially valid */
err |= cfc_check_trigger_src(&cmd->start_src, TRIG_NOW | TRIG_INT);
@@ -1519,57 +1490,30 @@
if (err)
return 2;
- /* step 3: make sure arguments are trivially compatible */
+ /* Step 3: check if arguments are trivially valid */
- if (cmd->start_arg != 0) {
- cmd->start_arg = 0;
- err++;
- }
+ err |= cfc_check_trigger_arg_is(&cmd->start_arg, 0);
- if (cmd->scan_begin_src == TRIG_FOLLOW) {
- /* internal trigger */
- if (cmd->scan_begin_arg != 0) {
- cmd->scan_begin_arg = 0;
- err++;
- }
- }
+ if (cmd->scan_begin_src == TRIG_FOLLOW) /* internal trigger */
+ err |= cfc_check_trigger_arg_is(&cmd->scan_begin_arg, 0);
- if (cmd->scan_begin_src == TRIG_TIMER) {
- /* timer */
- if (cmd->scan_begin_arg < 1000000) {
- cmd->scan_begin_arg = 1000000;
- err++;
- }
- }
+ if (cmd->scan_begin_src == TRIG_TIMER)
+ err |= cfc_check_trigger_arg_min(&cmd->scan_begin_arg,
+ 1000000);
+
/* not used now, is for later use */
- if (cmd->convert_src == TRIG_TIMER) {
- if (cmd->convert_arg < 125000) {
- cmd->convert_arg = 125000;
- err++;
- }
- }
+ if (cmd->convert_src == TRIG_TIMER)
+ err |= cfc_check_trigger_arg_min(&cmd->convert_arg, 125000);
- /* the same argument */
- if (cmd->scan_end_arg != cmd->chanlist_len) {
- cmd->scan_end_arg = cmd->chanlist_len;
- err++;
- }
+ err |= cfc_check_trigger_arg_is(&cmd->scan_end_arg, cmd->chanlist_len);
if (cmd->stop_src == TRIG_COUNT) {
/* any count is allowed */
} else {
/* TRIG_NONE */
- if (cmd->stop_arg != 0) {
- cmd->stop_arg = 0;
- err++;
- }
+ err |= cfc_check_trigger_arg_is(&cmd->stop_arg, 0);
}
- dev_dbg(&this_usbduxsub->interface->dev, "comedi%d: err=%d, "
- "scan_begin_src=%d, scan_begin_arg=%d, convert_src=%d, "
- "convert_arg=%d\n", dev->minor, err, cmd->scan_begin_src,
- cmd->scan_begin_arg, cmd->convert_src, cmd->convert_arg);
-
if (err)
return 3;
@@ -2375,9 +2319,10 @@
return 0;
}
-static int usbdux_attach_usb(struct comedi_device *dev,
- struct usb_interface *uinterf)
+static int usbdux_auto_attach(struct comedi_device *dev,
+ unsigned long context_unused)
{
+ struct usb_interface *uinterf = comedi_to_usb_interface(dev);
int ret;
struct usbduxsub *this_usbduxsub;
@@ -2386,14 +2331,12 @@
down(&start_stop_sem);
this_usbduxsub = usb_get_intfdata(uinterf);
if (!this_usbduxsub || !this_usbduxsub->probed) {
- printk(KERN_ERR
- "comedi%d: usbdux: error: attach_usb failed, not connected\n",
- dev->minor);
+ dev_err(dev->class_dev,
+ "usbdux: error: auto_attach failed, not connected\n");
ret = -ENODEV;
} else if (this_usbduxsub->attached) {
- printk(KERN_ERR
- "comedi%d: usbdux: error: attach_usb failed, already attached\n",
- dev->minor);
+ dev_err(dev->class_dev,
+ "error: auto_attach failed, already attached\n");
ret = -ENODEV;
} else
ret = usbdux_attach_common(dev, this_usbduxsub);
@@ -2417,7 +2360,7 @@
static struct comedi_driver usbdux_driver = {
.driver_name = "usbdux",
.module = THIS_MODULE,
- .attach_usb = usbdux_attach_usb,
+ .auto_attach = usbdux_auto_attach,
.detach = usbdux_detach,
};
diff --git a/drivers/staging/comedi/drivers/usbduxfast.c b/drivers/staging/comedi/drivers/usbduxfast.c
index 1154a7e2..4e19f61 100644
--- a/drivers/staging/comedi/drivers/usbduxfast.c
+++ b/drivers/staging/comedi/drivers/usbduxfast.c
@@ -37,6 +37,8 @@
* udev coldplug problem
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/firmware.h>
#include <linux/module.h>
@@ -216,8 +218,9 @@
usb_sndbulkpipe(udfs->usbdev, CHANNELLISTEP),
udfs->dux_commands, SIZEOFDUXBUFFER, &nsent, 10000);
if (tmp < 0)
- printk(KERN_ERR "comedi%d: could not transmit dux_commands to"
- "the usb-device, err=%d\n", udfs->comedidev->minor, tmp);
+ dev_err(&udfs->interface->dev,
+ "could not transmit dux_commands to the usb-device, err=%d\n",
+ tmp);
return tmp;
}
@@ -252,7 +255,7 @@
int ret = 0;
if (!udfs) {
- printk(KERN_ERR "comedi?: usbduxfast_ai_stop: udfs=NULL!\n");
+ pr_err("%s: udfs=NULL!\n", __func__);
return -EFAULT;
}
#ifdef CONFIG_COMEDI_DEBUG
@@ -284,7 +287,7 @@
#endif
udfs = dev->private;
if (!udfs) {
- printk(KERN_ERR "comedi: usbduxfast_ai_cancel: udfs=NULL\n");
+ dev_err(dev->class_dev, "%s: udfs=NULL\n", __func__);
return -EFAULT;
}
down(&udfs->sem);
@@ -309,26 +312,22 @@
struct usbduxfastsub_s *udfs;
struct comedi_device *this_comedidev;
struct comedi_subdevice *s;
- uint16_t *p;
/* sanity checks - is the urb there? */
if (!urb) {
- printk(KERN_ERR "comedi_: usbduxfast_: ao int-handler called "
- "with urb=NULL!\n");
+ pr_err("ao int-handler called with urb=NULL!\n");
return;
}
/* the context variable points to the subdevice */
this_comedidev = urb->context;
if (!this_comedidev) {
- printk(KERN_ERR "comedi_: usbduxfast_: urb context is a NULL "
- "pointer!\n");
+ pr_err("urb context is a NULL pointer!\n");
return;
}
/* the private structure of the subdevice is usbduxfastsub_s */
udfs = this_comedidev->private;
if (!udfs) {
- printk(KERN_ERR "comedi_: usbduxfast_: private of comedi "
- "subdev is a NULL pointer!\n");
+ pr_err("private of comedi subdev is a NULL pointer!\n");
return;
}
/* are we running a command? */
@@ -370,9 +369,8 @@
return;
default:
- printk("comedi%d: usbduxfast: non-zero urb status received in "
- "ai intr context: %d\n",
- udfs->comedidev->minor, urb->status);
+ pr_err("non-zero urb status received in ai intr context: %d\n",
+ urb->status);
s->async->events |= COMEDI_CB_EOA;
s->async->events |= COMEDI_CB_ERROR;
comedi_event(udfs->comedidev, s);
@@ -380,7 +378,6 @@
return;
}
- p = urb->transfer_buffer;
if (!udfs->ignore) {
if (!udfs->ai_continous) {
/* not continuous, fixed number of samples */
@@ -427,8 +424,8 @@
urb->status = 0;
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err < 0) {
- printk(KERN_ERR "comedi%d: usbduxfast: urb resubm failed: %d",
- udfs->comedidev->minor, err);
+ dev_err(&urb->dev->dev,
+ "urb resubm failed: %d", err);
s->async->events |= COMEDI_CB_EOA;
s->async->events |= COMEDI_CB_ERROR;
comedi_event(udfs->comedidev, s);
@@ -454,7 +451,8 @@
1, /* Length */
EZTIMEOUT); /* Timeout */
if (ret < 0) {
- printk("comedi_: usbduxfast_: control msg failed (start)\n");
+ dev_err(&udfs->interface->dev,
+ "control msg failed (start)\n");
return ret;
}
@@ -477,8 +475,8 @@
local_transfer_buffer, 1, /* Length */
EZTIMEOUT); /* Timeout */
if (ret < 0) {
- printk(KERN_ERR "comedi_: usbduxfast: control msg failed "
- "(stop)\n");
+ dev_err(&udfs->interface->dev,
+ "control msg failed (stop)\n");
return ret;
}
@@ -512,7 +510,7 @@
#endif
if (ret < 0) {
- printk(KERN_ERR "comedi_: usbduxfast: uppload failed\n");
+ dev_err(&udfs->interface->dev, "uppload failed\n");
return ret;
}
@@ -538,8 +536,8 @@
#endif
ret = usb_submit_urb(udfs->urbIn, GFP_ATOMIC);
if (ret) {
- printk(KERN_ERR "comedi_: usbduxfast: ai: usb_submit_urb error"
- " %d\n", ret);
+ dev_err(&udfs->interface->dev,
+ "ai: usb_submit_urb error %d\n", ret);
return ret;
}
return 0;
@@ -557,12 +555,6 @@
if (!udfs->probed)
return -ENODEV;
-#ifdef CONFIG_COMEDI_DEBUG
- printk(KERN_DEBUG "comedi%d: usbduxfast_ai_cmdtest\n", dev->minor);
- printk(KERN_DEBUG "comedi%d: usbduxfast: convert_arg=%u "
- "scan_begin_arg=%u\n",
- dev->minor, cmd->convert_arg, cmd->scan_begin_arg);
-#endif
/* Step 1 : check if triggers are trivially valid */
err |= cfc_check_trigger_src(&cmd->start_src,
@@ -592,20 +584,15 @@
if (err)
return 2;
- /* step 3: make sure arguments are trivially compatible */
+ /* Step 3: check if arguments are trivially valid */
- if (cmd->start_src == TRIG_NOW && cmd->start_arg != 0) {
- cmd->start_arg = 0;
- err++;
- }
+ if (cmd->start_src == TRIG_NOW)
+ err |= cfc_check_trigger_arg_is(&cmd->start_arg, 0);
if (!cmd->chanlist_len)
- err++;
+ err |= -EINVAL;
- if (cmd->scan_end_arg != cmd->chanlist_len) {
- cmd->scan_end_arg = cmd->chanlist_len;
- err++;
- }
+ err |= cfc_check_trigger_arg_is(&cmd->scan_end_arg, cmd->chanlist_len);
if (cmd->chanlist_len == 1)
minSamplPer = 1;
@@ -622,28 +609,19 @@
/* calc arg again */
tmp = steps / 30;
- if (cmd->convert_arg != tmp) {
- cmd->convert_arg = tmp;
- err++;
- }
+ err |= cfc_check_trigger_arg_is(&cmd->convert_arg, tmp);
}
if (cmd->scan_begin_src == TRIG_TIMER)
- err++;
+ err |= -EINVAL;
/* stop source */
switch (cmd->stop_src) {
case TRIG_COUNT:
- if (!cmd->stop_arg) {
- cmd->stop_arg = 1;
- err++;
- }
+ err |= cfc_check_trigger_arg_min(&cmd->stop_arg, 1);
break;
case TRIG_NONE:
- if (cmd->stop_arg != 0) {
- cmd->stop_arg = 0;
- err++;
- }
+ err |= cfc_check_trigger_arg_is(&cmd->stop_arg, 0);
break;
/*
* TRIG_EXT doesn't care since it doesn't trigger
@@ -682,8 +660,7 @@
#endif
if (trignum != 0) {
- printk(KERN_ERR "comedi%d: usbduxfast_ai_inttrig: invalid"
- " trignum\n", dev->minor);
+ dev_err(dev->class_dev, "%s: invalid trignum\n", __func__);
up(&udfs->sem);
return -EINVAL;
}
@@ -691,16 +668,16 @@
udfs->ai_cmd_running = 1;
ret = usbduxfastsub_submit_InURBs(udfs);
if (ret < 0) {
- printk(KERN_ERR "comedi%d: usbduxfast_ai_inttrig: "
- "urbSubmit: err=%d\n", dev->minor, ret);
+ dev_err(dev->class_dev,
+ "%s: urbSubmit: err=%d\n", __func__, ret);
udfs->ai_cmd_running = 0;
up(&udfs->sem);
return ret;
}
s->async->inttrig = NULL;
} else {
- printk(KERN_ERR "comedi%d: ai_inttrig but acqu is already"
- " running\n", dev->minor);
+ dev_err(dev->class_dev,
+ "ai_inttrig but acqu is already running\n");
}
up(&udfs->sem);
return 1;
@@ -738,8 +715,8 @@
return -ENODEV;
}
if (udfs->ai_cmd_running) {
- printk(KERN_ERR "comedi%d: ai_cmd not possible. Another ai_cmd"
- " is running.\n", dev->minor);
+ dev_err(dev->class_dev,
+ "ai_cmd not possible. Another ai_cmd is running.\n");
up(&udfs->sem);
return -EBUSY;
}
@@ -757,31 +734,29 @@
for (i = 0; i < cmd->chanlist_len; ++i) {
chan = CR_CHAN(cmd->chanlist[i]);
if (chan != i) {
- printk(KERN_ERR "comedi%d: cmd is accepting "
- "only consecutive channels.\n",
- dev->minor);
+ dev_err(dev->class_dev,
+ "cmd is accepting only consecutive channels.\n");
up(&udfs->sem);
return -EINVAL;
}
if ((gain != CR_RANGE(cmd->chanlist[i]))
&& (cmd->chanlist_len > 3)) {
- printk(KERN_ERR "comedi%d: the gain must be"
- " the same for all channels.\n",
- dev->minor);
+ dev_err(dev->class_dev,
+ "the gain must be the same for all channels.\n");
up(&udfs->sem);
return -EINVAL;
}
if (i >= NUMCHANNELS) {
- printk(KERN_ERR "comedi%d: channel list too"
- " long\n", dev->minor);
+ dev_err(dev->class_dev,
+ "channel list too long\n");
break;
}
}
}
steps = 0;
if (cmd->scan_begin_src == TRIG_TIMER) {
- printk(KERN_ERR "comedi%d: usbduxfast: "
- "scan_begin_src==TRIG_TIMER not valid.\n", dev->minor);
+ dev_err(dev->class_dev,
+ "scan_begin_src==TRIG_TIMER not valid.\n");
up(&udfs->sem);
return -EINVAL;
}
@@ -789,22 +764,21 @@
steps = (cmd->convert_arg * 30) / 1000;
if ((steps < MIN_SAMPLING_PERIOD) && (cmd->chanlist_len != 1)) {
- printk(KERN_ERR "comedi%d: usbduxfast: ai_cmd: steps=%ld, "
- "scan_begin_arg=%d. Not properly tested by cmdtest?\n",
- dev->minor, steps, cmd->scan_begin_arg);
+ dev_err(dev->class_dev,
+ "ai_cmd: steps=%ld, scan_begin_arg=%d. Not properly tested by cmdtest?\n",
+ steps, cmd->scan_begin_arg);
up(&udfs->sem);
return -EINVAL;
}
if (steps > MAX_SAMPLING_PERIOD) {
- printk(KERN_ERR "comedi%d: usbduxfast: ai_cmd: sampling rate "
- "too low.\n", dev->minor);
+ dev_err(dev->class_dev, "ai_cmd: sampling rate too low.\n");
up(&udfs->sem);
return -EINVAL;
}
if ((cmd->start_src == TRIG_EXT) && (cmd->chanlist_len != 1)
&& (cmd->chanlist_len != 16)) {
- printk(KERN_ERR "comedi%d: usbduxfast: ai_cmd: TRIG_EXT only"
- " with 1 or 16 channels possible.\n", dev->minor);
+ dev_err(dev->class_dev,
+ "ai_cmd: TRIG_EXT only with 1 or 16 channels possible.\n");
up(&udfs->sem);
return -EINVAL;
}
@@ -1121,8 +1095,7 @@
break;
default:
- printk(KERN_ERR "comedi %d: unsupported combination of "
- "channels\n", dev->minor);
+ dev_err(dev->class_dev, "unsupported combination of channels\n");
up(&udfs->sem);
return -EFAULT;
}
@@ -1134,17 +1107,16 @@
/* 0 means that the AD commands are sent */
result = send_dux_commands(udfs, SENDADCOMMANDS);
if (result < 0) {
- printk(KERN_ERR "comedi%d: adc command could not be submitted."
- "Aborting...\n", dev->minor);
+ dev_err(dev->class_dev,
+ "adc command could not be submitted. Aborting...\n");
up(&udfs->sem);
return result;
}
if (cmd->stop_src == TRIG_COUNT) {
udfs->ai_sample_count = cmd->stop_arg * cmd->scan_end_arg;
if (udfs->ai_sample_count < 1) {
- printk(KERN_ERR "comedi%d: "
- "(cmd->stop_arg)*(cmd->scan_end_arg)<1, "
- "aborting.\n", dev->minor);
+ dev_err(dev->class_dev,
+ "(cmd->stop_arg)*(cmd->scan_end_arg)<1, aborting.\n");
up(&udfs->sem);
return -EFAULT;
}
@@ -1193,8 +1165,7 @@
udfs = dev->private;
if (!udfs) {
- printk(KERN_ERR "comedi%d: ai_insn_read: no usb dev.\n",
- dev->minor);
+ dev_err(dev->class_dev, "%s: no usb dev.\n", __func__);
return -ENODEV;
}
#ifdef CONFIG_COMEDI_DEBUG
@@ -1207,8 +1178,8 @@
return -ENODEV;
}
if (udfs->ai_cmd_running) {
- printk(KERN_ERR "comedi%d: ai_insn_read not possible. Async "
- "Command is running.\n", dev->minor);
+ dev_err(dev->class_dev,
+ "ai_insn_read not possible. Async Command is running.\n");
up(&udfs->sem);
return -EBUSY;
}
@@ -1268,8 +1239,8 @@
/* 0 means that the AD commands are sent */
err = send_dux_commands(udfs, SENDADCOMMANDS);
if (err < 0) {
- printk(KERN_ERR "comedi%d: adc command could not be submitted."
- "Aborting...\n", dev->minor);
+ dev_err(dev->class_dev,
+ "adc command could not be submitted. Aborting...\n");
up(&udfs->sem);
return err;
}
@@ -1284,8 +1255,7 @@
udfs->transfer_buffer, SIZEINBUF,
&actual_length, 10000);
if (err < 0) {
- printk(KERN_ERR "comedi%d: insn timeout. No data.\n",
- dev->minor);
+ dev_err(dev->class_dev, "insn timeout. No data.\n");
up(&udfs->sem);
return err;
}
@@ -1297,15 +1267,13 @@
udfs->transfer_buffer, SIZEINBUF,
&actual_length, 10000);
if (err < 0) {
- printk(KERN_ERR "comedi%d: insn data error: %d\n",
- dev->minor, err);
+ dev_err(dev->class_dev, "insn data error: %d\n", err);
up(&udfs->sem);
return err;
}
n = actual_length / sizeof(uint16_t);
if ((n % 16) != 0) {
- printk(KERN_ERR "comedi%d: insn data packet "
- "corrupted.\n", dev->minor);
+ dev_err(dev->class_dev, "insn data packet corrupted.\n");
up(&udfs->sem);
return -EINVAL;
}
@@ -1454,9 +1422,10 @@
return 0;
}
-static int usbduxfast_attach_usb(struct comedi_device *dev,
- struct usb_interface *uinterf)
+static int usbduxfast_auto_attach(struct comedi_device *dev,
+ unsigned long context_unused)
{
+ struct usb_interface *uinterf = comedi_to_usb_interface(dev);
int ret;
struct usbduxfastsub_s *udfs;
@@ -1465,11 +1434,11 @@
udfs = usb_get_intfdata(uinterf);
if (!udfs || !udfs->probed) {
dev_err(dev->class_dev,
- "usbduxfast: error: attach_usb failed, not connected\n");
+ "usbduxfast: error: auto_attach failed, not connected\n");
ret = -ENODEV;
} else if (udfs->attached) {
dev_err(dev->class_dev,
- "usbduxfast: error: attach_usb failed, already attached\n");
+ "usbduxfast: error: auto_attach failed, already attached\n");
ret = -ENODEV;
} else
ret = usbduxfast_attach_common(dev, udfs);
@@ -1495,7 +1464,7 @@
static struct comedi_driver usbduxfast_driver = {
.driver_name = "usbduxfast",
.module = THIS_MODULE,
- .attach_usb = usbduxfast_attach_usb,
+ .auto_attach = usbduxfast_auto_attach,
.detach = usbduxfast_detach,
};
@@ -1535,8 +1504,8 @@
int ret;
if (udev->speed != USB_SPEED_HIGH) {
- printk(KERN_ERR "comedi_: usbduxfast_: This driver needs"
- "USB 2.0 to operate. Aborting...\n");
+ dev_err(&uinterf->dev,
+ "This driver needs USB 2.0 to operate. Aborting...\n");
return -ENODEV;
}
#ifdef CONFIG_COMEDI_DEBUG
@@ -1555,7 +1524,8 @@
/* no more space */
if (index == -1) {
- printk(KERN_ERR "Too many usbduxfast-devices connected.\n");
+ dev_err(&uinterf->dev,
+ "Too many usbduxfast-devices connected.\n");
up(&start_stop_sem);
return -EMFILE;
}
@@ -1586,8 +1556,8 @@
usbduxfastsub[index].dux_commands = kmalloc(SIZEOFDUXBUFFER,
GFP_KERNEL);
if (!usbduxfastsub[index].dux_commands) {
- printk(KERN_ERR "comedi_: usbduxfast: error alloc space for "
- "dac commands\n");
+ dev_err(&uinterf->dev,
+ "error alloc space for dac commands\n");
tidy_up(&(usbduxfastsub[index]));
up(&start_stop_sem);
return -ENOMEM;
@@ -1595,8 +1565,8 @@
/* create space of the instruction buffer */
usbduxfastsub[index].insnBuffer = kmalloc(SIZEINSNBUF, GFP_KERNEL);
if (!usbduxfastsub[index].insnBuffer) {
- printk(KERN_ERR "comedi_: usbduxfast: could not alloc space "
- "for insnBuffer\n");
+ dev_err(&uinterf->dev,
+ "could not alloc space for insnBuffer\n");
tidy_up(&(usbduxfastsub[index]));
up(&start_stop_sem);
return -ENOMEM;
@@ -1605,24 +1575,25 @@
i = usb_set_interface(usbduxfastsub[index].usbdev,
usbduxfastsub[index].ifnum, 1);
if (i < 0) {
- printk(KERN_ERR "comedi_: usbduxfast%d: could not switch to "
- "alternate setting 1.\n", index);
+ dev_err(&uinterf->dev,
+ "usbduxfast%d: could not switch to alternate setting 1.\n",
+ index);
tidy_up(&(usbduxfastsub[index]));
up(&start_stop_sem);
return -ENODEV;
}
usbduxfastsub[index].urbIn = usb_alloc_urb(0, GFP_KERNEL);
if (!usbduxfastsub[index].urbIn) {
- printk(KERN_ERR "comedi_: usbduxfast%d: Could not alloc."
- "urb\n", index);
+ dev_err(&uinterf->dev,
+ "usbduxfast%d: Could not alloc. urb\n", index);
tidy_up(&(usbduxfastsub[index]));
up(&start_stop_sem);
return -ENOMEM;
}
usbduxfastsub[index].transfer_buffer = kmalloc(SIZEINBUF, GFP_KERNEL);
if (!usbduxfastsub[index].transfer_buffer) {
- printk(KERN_ERR "comedi_: usbduxfast%d: could not alloc. "
- "transb.\n", index);
+ dev_err(&uinterf->dev,
+ "usbduxfast%d: could not alloc. transb.\n", index);
tidy_up(&(usbduxfastsub[index]));
up(&start_stop_sem);
return -ENOMEM;
@@ -1640,12 +1611,12 @@
usbduxfast_firmware_request_complete_handler);
if (ret) {
- dev_err(&udev->dev, "could not load firmware (err=%d)\n", ret);
+ dev_err(&uinterf->dev, "could not load firmware (err=%d)\n", ret);
return ret;
}
- printk(KERN_INFO "comedi_: usbduxfast%d has been successfully "
- "initialized.\n", index);
+ dev_info(&uinterf->dev,
+ "usbduxfast%d has been successfully initialized.\n", index);
/* success */
return 0;
}
@@ -1656,13 +1627,11 @@
struct usb_device *udev = interface_to_usbdev(intf);
if (!udfs) {
- printk(KERN_ERR "comedi_: usbduxfast: disconnect called with "
- "null pointer.\n");
+ dev_err(&intf->dev, "disconnect called with null pointer.\n");
return;
}
if (udfs->usbdev != udev) {
- printk(KERN_ERR "comedi_: usbduxfast: BUG! called with wrong "
- "ptr!!!\n");
+ dev_err(&intf->dev, "BUG! called with wrong ptr!!!\n");
return;
}
diff --git a/drivers/staging/comedi/drivers/usbduxsigma.c b/drivers/staging/comedi/drivers/usbduxsigma.c
index b169412..cdd279b 100644
--- a/drivers/staging/comedi/drivers/usbduxsigma.c
+++ b/drivers/staging/comedi/drivers/usbduxsigma.c
@@ -904,9 +904,6 @@
if (!(this_usbduxsub->probed))
return -ENODEV;
- dev_dbg(&this_usbduxsub->interface->dev,
- "comedi%d: usbdux_ai_cmdtest\n", dev->minor);
-
/* Step 1 : check if triggers are trivially valid */
err |= cfc_check_trigger_src(&cmd->start_src, TRIG_NOW | TRIG_INT);
@@ -928,19 +925,12 @@
if (err)
return 2;
- /* step 3: make sure arguments are trivially compatible */
- if (cmd->start_arg != 0) {
- cmd->start_arg = 0;
- err++;
- }
+ /* Step 3: check if arguments are trivially valid */
- if (cmd->scan_begin_src == TRIG_FOLLOW) {
- /* internal trigger */
- if (cmd->scan_begin_arg != 0) {
- cmd->scan_begin_arg = 0;
- err++;
- }
- }
+ err |= cfc_check_trigger_arg_is(&cmd->start_arg, 0);
+
+ if (cmd->scan_begin_src == TRIG_FOLLOW) /* internal trigger */
+ err |= cfc_check_trigger_arg_is(&cmd->scan_begin_arg, 0);
if (cmd->scan_begin_src == TRIG_TIMER) {
if (this_usbduxsub->high_speed) {
@@ -951,51 +941,35 @@
* are in the channel list the more time we need.
*/
i = chanToInterval(cmd->chanlist_len);
- if (cmd->scan_begin_arg < (1000000 / 8 * i)) {
- cmd->scan_begin_arg = 1000000 / 8 * i;
- err++;
- }
+ err |= cfc_check_trigger_arg_min(&cmd->scan_begin_arg,
+ (1000000 / 8 * i));
/* now calc the real sampling rate with all the
* rounding errors */
tmpTimer =
((unsigned int)(cmd->scan_begin_arg / 125000)) *
125000;
- if (cmd->scan_begin_arg != tmpTimer) {
- cmd->scan_begin_arg = tmpTimer;
- err++;
- }
} else {
/* full speed */
/* 1kHz scans every USB frame */
- if (cmd->scan_begin_arg < 1000000) {
- cmd->scan_begin_arg = 1000000;
- err++;
- }
+ err |= cfc_check_trigger_arg_min(&cmd->scan_begin_arg,
+ 1000000);
/*
* calc the real sampling rate with the rounding errors
*/
tmpTimer = ((unsigned int)(cmd->scan_begin_arg /
1000000)) * 1000000;
- if (cmd->scan_begin_arg != tmpTimer) {
- cmd->scan_begin_arg = tmpTimer;
- err++;
- }
}
+ err |= cfc_check_trigger_arg_is(&cmd->scan_begin_arg,
+ tmpTimer);
}
- /* the same argument */
- if (cmd->scan_end_arg != cmd->chanlist_len) {
- cmd->scan_end_arg = cmd->chanlist_len;
- err++;
- }
+
+ err |= cfc_check_trigger_arg_is(&cmd->scan_end_arg, cmd->chanlist_len);
if (cmd->stop_src == TRIG_COUNT) {
/* any count is allowed */
} else {
/* TRIG_NONE */
- if (cmd->stop_arg != 0) {
- cmd->stop_arg = 0;
- err++;
- }
+ err |= cfc_check_trigger_arg_is(&cmd->stop_arg, 0);
}
if (err)
@@ -1576,57 +1550,30 @@
if (err)
return 2;
- /* step 3: make sure arguments are trivially compatible */
+ /* Step 3: check if arguments are trivially valid */
- if (cmd->start_arg != 0) {
- cmd->start_arg = 0;
- err++;
- }
+ err |= cfc_check_trigger_arg_is(&cmd->start_arg, 0);
- if (cmd->scan_begin_src == TRIG_FOLLOW) {
- /* internal trigger */
- if (cmd->scan_begin_arg != 0) {
- cmd->scan_begin_arg = 0;
- err++;
- }
- }
+ if (cmd->scan_begin_src == TRIG_FOLLOW) /* internal trigger */
+ err |= cfc_check_trigger_arg_is(&cmd->scan_begin_arg, 0);
- if (cmd->scan_begin_src == TRIG_TIMER) {
- /* timer */
- if (cmd->scan_begin_arg < 1000000) {
- cmd->scan_begin_arg = 1000000;
- err++;
- }
- }
+ if (cmd->scan_begin_src == TRIG_TIMER)
+ err |= cfc_check_trigger_arg_min(&cmd->scan_begin_arg,
+ 1000000);
+
/* not used now, is for later use */
- if (cmd->convert_src == TRIG_TIMER) {
- if (cmd->convert_arg < 125000) {
- cmd->convert_arg = 125000;
- err++;
- }
- }
+ if (cmd->convert_src == TRIG_TIMER)
+ err |= cfc_check_trigger_arg_min(&cmd->convert_arg, 125000);
- /* the same argument */
- if (cmd->scan_end_arg != cmd->chanlist_len) {
- cmd->scan_end_arg = cmd->chanlist_len;
- err++;
- }
+ err |= cfc_check_trigger_arg_is(&cmd->scan_end_arg, cmd->chanlist_len);
if (cmd->stop_src == TRIG_COUNT) {
/* any count is allowed */
} else {
/* TRIG_NONE */
- if (cmd->stop_arg != 0) {
- cmd->stop_arg = 0;
- err++;
- }
+ err |= cfc_check_trigger_arg_is(&cmd->stop_arg, 0);
}
- dev_dbg(&this_usbduxsub->interface->dev, "comedi%d: err=%d, "
- "scan_begin_src=%d, scan_begin_arg=%d, convert_src=%d, "
- "convert_arg=%d\n", dev->minor, err, cmd->scan_begin_src,
- cmd->scan_begin_arg, cmd->convert_src, cmd->convert_arg);
-
if (err)
return 3;
@@ -2359,9 +2306,10 @@
return 0;
}
-static int usbduxsigma_attach_usb(struct comedi_device *dev,
- struct usb_interface *uinterf)
+static int usbduxsigma_auto_attach(struct comedi_device *dev,
+ unsigned long context_unused)
{
+ struct usb_interface *uinterf = comedi_to_usb_interface(dev);
int ret;
struct usbduxsub *uds;
@@ -2370,11 +2318,11 @@
uds = usb_get_intfdata(uinterf);
if (!uds || !uds->probed) {
dev_err(dev->class_dev,
- "usbduxsigma: error: attach_usb failed, not connected\n");
+ "usbduxsigma: error: auto_attach failed, not connected\n");
ret = -ENODEV;
} else if (uds->attached) {
dev_err(dev->class_dev,
- "usbduxsigma: error: attach_usb failed, already attached\n");
+ "usbduxsigma: error: auto_attach failed, already attached\n");
ret = -ENODEV;
} else
ret = usbduxsigma_attach_common(dev, uds);
@@ -2398,7 +2346,7 @@
static struct comedi_driver usbduxsigma_driver = {
.driver_name = "usbduxsigma",
.module = THIS_MODULE,
- .attach_usb = usbduxsigma_attach_usb,
+ .auto_attach = usbduxsigma_auto_attach,
.detach = usbduxsigma_detach,
};
diff --git a/drivers/staging/comedi/drivers/vmk80xx.c b/drivers/staging/comedi/drivers/vmk80xx.c
index df277aa..609dc69 100644
--- a/drivers/staging/comedi/drivers/vmk80xx.c
+++ b/drivers/staging/comedi/drivers/vmk80xx.c
@@ -1209,9 +1209,10 @@
}
/* called via comedi_usb_auto_config() */
-static int vmk80xx_attach_usb(struct comedi_device *cdev,
- struct usb_interface *intf)
+static int vmk80xx_auto_attach(struct comedi_device *cdev,
+ unsigned long context_unused)
{
+ struct usb_interface *intf = comedi_to_usb_interface(cdev);
int i;
int ret;
@@ -1246,7 +1247,7 @@
.driver_name = "vmk80xx",
.attach = vmk80xx_attach,
.detach = vmk80xx_detach,
- .attach_usb = vmk80xx_attach_usb,
+ .auto_attach = vmk80xx_auto_attach,
};
static int vmk80xx_usb_probe(struct usb_interface *intf,
@@ -1371,12 +1372,11 @@
if (dev->board.model == VMK8061_MODEL) {
vmk80xx_read_eeprom(dev, IC3_VERSION);
- printk(KERN_INFO "comedi#: vmk80xx: %s\n", dev->fw.ic3_vers);
+ dev_info(&intf->dev, "%s\n", dev->fw.ic3_vers);
if (vmk80xx_check_data_link(dev)) {
vmk80xx_read_eeprom(dev, IC6_VERSION);
- printk(KERN_INFO "comedi#: vmk80xx: %s\n",
- dev->fw.ic6_vers);
+ dev_info(&intf->dev, "%s\n", dev->fw.ic6_vers);
} else {
dbgcm("comedi#: vmk80xx: no conn. to CPU\n");
}
@@ -1387,8 +1387,8 @@
dev->probed = 1;
- printk(KERN_INFO "comedi#: vmk80xx: board #%d [%s] now attached\n",
- dev->count, dev->board.name);
+ dev_info(&intf->dev, "board #%d [%s] now attached\n",
+ dev->count, dev->board.name);
mutex_unlock(&glb_mutex);
@@ -1422,8 +1422,8 @@
kfree(dev->usb_rx_buf);
kfree(dev->usb_tx_buf);
- printk(KERN_INFO "comedi#: vmk80xx: board #%d [%s] now detached\n",
- dev->count, dev->board.name);
+ dev_info(&intf->dev, "board #%d [%s] now detached\n",
+ dev->count, dev->board.name);
up(&dev->limit_sem);
mutex_unlock(&glb_mutex);
diff --git a/drivers/staging/comedi/kcomedilib/kcomedilib_main.c b/drivers/staging/comedi/kcomedilib/kcomedilib_main.c
index 3f20ea5..4dc09a2 100644
--- a/drivers/staging/comedi/kcomedilib/kcomedilib_main.c
+++ b/drivers/staging/comedi/kcomedilib/kcomedilib_main.c
@@ -21,7 +21,6 @@
*/
-#define __NO_VERSION__
#include <linux/module.h>
#include <linux/errno.h>
@@ -95,7 +94,8 @@
s = &dev->subdevices[insn->subdev];
if (s->type == COMEDI_SUBD_UNUSED) {
- printk(KERN_ERR "%d not useable subdevice\n", insn->subdev);
+ dev_err(dev->class_dev,
+ "%d not useable subdevice\n", insn->subdev);
ret = -EIO;
goto error;
}
@@ -104,7 +104,7 @@
ret = comedi_check_chanlist(s, 1, &insn->chanspec);
if (ret < 0) {
- printk(KERN_ERR "bad chanspec\n");
+ dev_err(dev->class_dev, "bad chanspec\n");
ret = -EINVAL;
goto error;
}
diff --git a/drivers/staging/comedi/proc.c b/drivers/staging/comedi/proc.c
index bb7e70e..01acbe9 100644
--- a/drivers/staging/comedi/proc.c
+++ b/drivers/staging/comedi/proc.c
@@ -28,7 +28,6 @@
was cool.
*/
-#define __NO_VERSION__
#include "comedidev.h"
#include "comedi_internal.h"
#include <linux/proc_fs.h>
diff --git a/drivers/staging/crystalhd/crystalhd_cmds.c b/drivers/staging/crystalhd/crystalhd_cmds.c
index 05fe787..ed99daa6 100644
--- a/drivers/staging/crystalhd/crystalhd_cmds.c
+++ b/drivers/staging/crystalhd/crystalhd_cmds.c
@@ -308,9 +308,9 @@
sts = crystalhd_download_fw(ctx->adp, (uint8_t *)idata->add_cdata,
idata->add_cdata_sz);
- if (sts != BC_STS_SUCCESS) {
+ if (sts != BC_STS_SUCCESS)
BCMLOG_ERR("Firmware Download Failure!! - %d\n", sts);
- } else
+ else
ctx->state |= BC_LINK_INIT;
return sts;
@@ -951,7 +951,7 @@
*
* Called at the time of driver load.
*/
-enum BC_STATUS __devinit crystalhd_setup_cmd_context(struct crystalhd_cmd *ctx,
+enum BC_STATUS crystalhd_setup_cmd_context(struct crystalhd_cmd *ctx,
struct crystalhd_adp *adp)
{
int i = 0;
@@ -986,7 +986,7 @@
*
* Called at the time of driver un-load.
*/
-enum BC_STATUS __devexit crystalhd_delete_cmd_context(struct crystalhd_cmd *ctx)
+enum BC_STATUS crystalhd_delete_cmd_context(struct crystalhd_cmd *ctx)
{
BCMLOG(BCMLOG_DBG, "Deleting Command context..\n");
diff --git a/drivers/staging/crystalhd/crystalhd_lnx.c b/drivers/staging/crystalhd/crystalhd_lnx.c
index 166203a..85f51fb 100644
--- a/drivers/staging/crystalhd/crystalhd_lnx.c
+++ b/drivers/staging/crystalhd/crystalhd_lnx.c
@@ -353,7 +353,7 @@
.llseek = noop_llseek,
};
-static int __devinit chd_dec_init_chdev(struct crystalhd_adp *adp)
+static int chd_dec_init_chdev(struct crystalhd_adp *adp)
{
struct crystalhd_ioctl_data *temp;
struct device *dev;
@@ -418,7 +418,7 @@
return rc;
}
-static void __devexit chd_dec_release_chdev(struct crystalhd_adp *adp)
+static void chd_dec_release_chdev(struct crystalhd_adp *adp)
{
struct crystalhd_ioctl_data *temp = NULL;
if (!adp)
@@ -443,7 +443,7 @@
crystalhd_delete_elem_pool(adp);
}
-static int __devinit chd_pci_reserve_mem(struct crystalhd_adp *pinfo)
+static int chd_pci_reserve_mem(struct crystalhd_adp *pinfo)
{
int rc;
unsigned long bar2 = pci_resource_start(pinfo->pdev, 2);
@@ -496,7 +496,7 @@
return 0;
}
-static void __devexit chd_pci_release_mem(struct crystalhd_adp *pinfo)
+static void chd_pci_release_mem(struct crystalhd_adp *pinfo)
{
if (!pinfo)
return;
@@ -511,7 +511,7 @@
}
-static void __devexit chd_dec_pci_remove(struct pci_dev *pdev)
+static void chd_dec_pci_remove(struct pci_dev *pdev)
{
struct crystalhd_adp *pinfo;
enum BC_STATUS sts = BC_STS_SUCCESS;
@@ -537,7 +537,7 @@
g_adp_info = NULL;
}
-static int __devinit chd_dec_pci_probe(struct pci_dev *pdev,
+static int chd_dec_pci_probe(struct pci_dev *pdev,
const struct pci_device_id *entry)
{
struct crystalhd_adp *pinfo;
@@ -711,7 +711,7 @@
static struct pci_driver bc_chd_70012_driver = {
.name = "Broadcom 70012 Decoder",
.probe = chd_dec_pci_probe,
- .remove = __devexit_p(chd_dec_pci_remove),
+ .remove = chd_dec_pci_remove,
.id_table = chd_dec_pci_id_table,
#ifdef CONFIG_PM
.suspend = chd_dec_pci_suspend,
diff --git a/drivers/staging/crystalhd/crystalhd_misc.c b/drivers/staging/crystalhd/crystalhd_misc.c
index b3a6378..a5f109c 100644
--- a/drivers/staging/crystalhd/crystalhd_misc.c
+++ b/drivers/staging/crystalhd/crystalhd_misc.c
@@ -960,7 +960,7 @@
* Create general purpose list element pool to hold pending,
* and active requests.
*/
-int __devinit crystalhd_create_elem_pool(struct crystalhd_adp *adp,
+int crystalhd_create_elem_pool(struct crystalhd_adp *adp,
uint32_t pool_size)
{
uint32_t i;
diff --git a/drivers/staging/csr/Makefile b/drivers/staging/csr/Makefile
index ab626ed..dbd135a 100644
--- a/drivers/staging/csr/Makefile
+++ b/drivers/staging/csr/Makefile
@@ -70,5 +70,4 @@
csr_framework_ext.o \
csr_wifi_serialize_primitive_types.o \
csr_serialize_primitive_types.o \
- csr_msgconv.o \
- csr_panic.o
+ csr_msgconv.o
diff --git a/drivers/staging/csr/bh.c b/drivers/staging/csr/bh.c
index addee05..1a1f5c7 100644
--- a/drivers/staging/csr/bh.c
+++ b/drivers/staging/csr/bh.c
@@ -228,20 +228,19 @@
*
* ---------------------------------------------------------------------------
*/
-static int
-bh_thread_function(void *arg)
+static int bh_thread_function(void *arg)
{
- unifi_priv_t *priv = (unifi_priv_t*)arg;
- CsrResult csrResult;
- long ret;
- u32 timeout, t;
- struct uf_thread *this_thread;
+ unifi_priv_t *priv = (unifi_priv_t *)arg;
+ CsrResult csrResult;
+ long ret;
+ u32 timeout, t;
+ struct uf_thread *this_thread;
- unifi_trace(priv, UDBG2, "bh_thread_function starting\n");
+ unifi_trace(priv, UDBG2, "bh_thread_function starting\n");
- this_thread = &priv->bh_thread;
+ this_thread = &priv->bh_thread;
- t = timeout = 0;
+ t = timeout = 0;
while (!kthread_should_stop()) {
/* wait until an error occurs, or we need to process something. */
unifi_trace(priv, UDBG3, "bh_thread goes to sleep.\n");
diff --git a/drivers/staging/csr/csr_framework_ext.c b/drivers/staging/csr/csr_framework_ext.c
index f91a4bf..2aabb6c 100644
--- a/drivers/staging/csr/csr_framework_ext.c
+++ b/drivers/staging/csr/csr_framework_ext.c
@@ -9,7 +9,6 @@
*****************************************************************************/
#include <linux/kernel.h>
-#include <linux/version.h>
#include <linux/kthread.h>
#include <linux/module.h>
#include <linux/freezer.h>
@@ -18,102 +17,6 @@
#include <linux/bitops.h>
#include "csr_framework_ext.h"
-#include "csr_panic.h"
-
-/*----------------------------------------------------------------------------*
- * NAME
- * CsrMutexCreate
- *
- * DESCRIPTION
- * Create a mutex and return a handle to the created mutex.
- *
- * RETURNS
- * Possible values:
- * CSR_RESULT_SUCCESS in case of success
- * CSR_FE_RESULT_NO_MORE_MUTEXES in case of out of mutex resources
- * CSR_FE_RESULT_INVALID_POINTER in case the mutexHandle pointer is invalid
- *
- *----------------------------------------------------------------------------*/
-CsrResult CsrMutexCreate(CsrMutexHandle *mutexHandle)
-{
- if (mutexHandle == NULL)
- {
- return CSR_FE_RESULT_INVALID_POINTER;
- }
-
- sema_init(mutexHandle, 1);
-
- return CSR_RESULT_SUCCESS;
-}
-
-/*----------------------------------------------------------------------------*
- * NAME
- * CsrMutexDestroy
- *
- * DESCRIPTION
- * Destroy the previously created mutex.
- *
- * RETURNS
- * void
- *
- *----------------------------------------------------------------------------*/
-void CsrMutexDestroy(CsrMutexHandle *mutexHandle)
-{
-}
-
-/*----------------------------------------------------------------------------*
- * NAME
- * CsrMutexLock
- *
- * DESCRIPTION
- * Lock the mutex refered to by the provided handle.
- *
- * RETURNS
- * Possible values:
- * CSR_RESULT_SUCCESS in case of success
- * CSR_FE_RESULT_INVALID_HANDLE in case the mutexHandle is invalid
- *
- *----------------------------------------------------------------------------*/
-CsrResult CsrMutexLock(CsrMutexHandle *mutexHandle)
-{
- if (mutexHandle == NULL)
- {
- return CSR_FE_RESULT_INVALID_POINTER;
- }
-
- if (down_interruptible(mutexHandle))
- {
- CsrPanic(CSR_TECH_FW, CSR_PANIC_FW_UNEXPECTED_VALUE, "CsrMutexLock Failed");
- return CSR_FE_RESULT_INVALID_POINTER;
- }
-
- return CSR_RESULT_SUCCESS;
-}
-
-/*----------------------------------------------------------------------------*
- * NAME
- * CsrMutexUnlock
- *
- * DESCRIPTION
- * Unlock the mutex refered to by the provided handle.
- *
- * RETURNS
- * Possible values:
- * CSR_RESULT_SUCCESS in case of success
- * CSR_FE_RESULT_INVALID_HANDLE in case the mutexHandle is invalid
- *
- *----------------------------------------------------------------------------*/
-CsrResult CsrMutexUnlock(CsrMutexHandle *mutexHandle)
-{
- if (mutexHandle == NULL)
- {
- return CSR_FE_RESULT_INVALID_POINTER;
- }
-
- up(mutexHandle);
-
- return CSR_RESULT_SUCCESS;
-}
/*----------------------------------------------------------------------------*
* NAME
diff --git a/drivers/staging/csr/csr_framework_ext.h b/drivers/staging/csr/csr_framework_ext.h
index 66973e9..e8ae490 100644
--- a/drivers/staging/csr/csr_framework_ext.h
+++ b/drivers/staging/csr/csr_framework_ext.h
@@ -13,10 +13,6 @@
#include "csr_result.h"
#include "csr_framework_ext_types.h"
-#ifdef __cplusplus
-extern "C" {
-#endif
-
/* Result codes */
#define CSR_FE_RESULT_NO_MORE_EVENTS ((CsrResult) 0x0001)
#define CSR_FE_RESULT_INVALID_POINTER ((CsrResult) 0x0002)
@@ -34,215 +30,6 @@
#define CSR_EVENT_WAIT_INFINITE ((u16) 0xFFFF)
-/*----------------------------------------------------------------------------*
- * NAME
- * CsrEventCreate
- *
- * DESCRIPTION
- * Creates an event and returns a handle to the created event.
- *
- * RETURNS
- * Possible values:
- * CSR_RESULT_SUCCESS in case of success
- * CSR_FE_RESULT_NO_MORE_EVENTS in case of out of event resources
- * CSR_FE_RESULT_INVALID_POINTER in case the eventHandle pointer is invalid
- *
- *----------------------------------------------------------------------------*/
-CsrResult CsrEventCreate(CsrEventHandle *eventHandle);
-
-/*----------------------------------------------------------------------------*
- * NAME
- * CsrEventWait
- *
- * DESCRIPTION
- * Wait fore one or more of the event bits to be set.
- *
- * RETURNS
- * Possible values:
- * CSR_RESULT_SUCCESS in case of success
- * CSR_FE_RESULT_TIMEOUT in case of timeout
- * CSR_FE_RESULT_INVALID_HANDLE in case the eventHandle is invalid
- * CSR_FE_RESULT_INVALID_POINTER in case the eventBits pointer is invalid
- *
- *----------------------------------------------------------------------------*/
-CsrResult CsrEventWait(CsrEventHandle *eventHandle, u16 timeoutInMs, u32 *eventBits);
-
-/*----------------------------------------------------------------------------*
- * NAME
- * CsrEventSet
- *
- * DESCRIPTION
- * Set an event.
- *
- * RETURNS
- * Possible values:
- * CSR_RESULT_SUCCESS in case of success
- * CSR_FE_RESULT_INVALID_HANDLE in case the eventHandle is invalid
- *
- *----------------------------------------------------------------------------*/
-CsrResult CsrEventSet(CsrEventHandle *eventHandle, u32 eventBits);
-
-/*----------------------------------------------------------------------------*
- * NAME
- * CsrEventDestroy
- *
- * DESCRIPTION
- * Destroy the event associated.
- *
- * RETURNS
- * void
- *
- *----------------------------------------------------------------------------*/
-void CsrEventDestroy(CsrEventHandle *eventHandle);
-
-/*----------------------------------------------------------------------------*
- * NAME
- * CsrMutexCreate
- *
- * DESCRIPTION
- * Create a mutex and return a handle to the created mutex.
- *
- * RETURNS
- * Possible values:
- * CSR_RESULT_SUCCESS in case of success
- * CSR_FE_RESULT_NO_MORE_MUTEXES in case of out of mutex resources
- * CSR_FE_RESULT_INVALID_POINTER in case the mutexHandle pointer is invalid
- *
- *----------------------------------------------------------------------------*/
-CsrResult CsrMutexCreate(CsrMutexHandle *mutexHandle);
-
-/*----------------------------------------------------------------------------*
- * NAME
- * CsrMutexLock
- *
- * DESCRIPTION
- * Lock the mutex refered to by the provided handle.
- *
- * RETURNS
- * Possible values:
- * CSR_RESULT_SUCCESS in case of success
- * CSR_FE_RESULT_INVALID_HANDLE in case the mutexHandle is invalid
- *
- *----------------------------------------------------------------------------*/
-CsrResult CsrMutexLock(CsrMutexHandle *mutexHandle);
-
-/*----------------------------------------------------------------------------*
- * NAME
- * CsrMutexUnlock
- *
- * DESCRIPTION
- * Unlock the mutex refered to by the provided handle.
- *
- * RETURNS
- * Possible values:
- * CSR_RESULT_SUCCESS in case of success
- * CSR_FE_RESULT_INVALID_HANDLE in case the mutexHandle is invalid
- *
- *----------------------------------------------------------------------------*/
-CsrResult CsrMutexUnlock(CsrMutexHandle *mutexHandle);
-
-/*----------------------------------------------------------------------------*
- * NAME
- * CsrMutexDestroy
- *
- * DESCRIPTION
- * Destroy the previously created mutex.
- *
- * RETURNS
- * void
- *
- *----------------------------------------------------------------------------*/
-void CsrMutexDestroy(CsrMutexHandle *mutexHandle);
-
-/*----------------------------------------------------------------------------*
- * NAME
- * CsrGlobalMutexLock
- *
- * DESCRIPTION
- * Lock the global mutex. The global mutex is a single pre-initialised
- * shared mutex, spinlock or similar that does not need to be created prior
- * to use. The limitation is that there is only one single lock shared
- * between all code. Consequently, it must only be used very briefly to
- * either protect simple one-time initialisation or to protect the creation
- * of a dedicated mutex by calling CsrMutexCreate.
- *
- *----------------------------------------------------------------------------*/
-void CsrGlobalMutexLock(void);
-
-/*----------------------------------------------------------------------------*
- * NAME
- * CsrGlobalMutexUnlock
- *
- * DESCRIPTION
- * Unlock the global mutex.
- *
- *----------------------------------------------------------------------------*/
-void CsrGlobalMutexUnlock(void);
-
-/*----------------------------------------------------------------------------*
- * NAME
- * CsrThreadCreate
- *
- * DESCRIPTION
- * Create thread function and return a handle to the created thread.
- *
- * RETURNS
- * Possible values:
- * CSR_RESULT_SUCCESS in case of success
- * CSR_FE_RESULT_NO_MORE_THREADS in case of out of thread resources
- * CSR_FE_RESULT_INVALID_POINTER in case one of the supplied pointers is invalid
- *
- *----------------------------------------------------------------------------*/
-CsrResult CsrThreadCreate(void (*threadFunction)(void *pointer), void *pointer,
- u32 stackSize, u16 priority,
- const char *threadName, CsrThreadHandle *threadHandle);
-
-/*----------------------------------------------------------------------------*
- * NAME
- * CsrThreadGetHandle
- *
- * DESCRIPTION
- * Return thread handle of calling thread.
- *
- * RETURNS
- * Possible values:
- * CSR_RESULT_SUCCESS in case of success
- * CSR_FE_RESULT_INVALID_POINTER in case the threadHandle pointer is invalid
- *
- *----------------------------------------------------------------------------*/
-CsrResult CsrThreadGetHandle(CsrThreadHandle *threadHandle);
-
-/*----------------------------------------------------------------------------*
- * NAME
- * CsrThreadEqual
- *
- * DESCRIPTION
- * Compare thread handles
- *
- * RETURNS
- * Possible values:
- * CSR_RESULT_SUCCESS in case thread handles are identical
- * CSR_FE_RESULT_INVALID_POINTER in case either threadHandle pointer is invalid
- * CSR_RESULT_FAILURE otherwise
- *
- *----------------------------------------------------------------------------*/
-CsrResult CsrThreadEqual(CsrThreadHandle *threadHandle1, CsrThreadHandle *threadHandle2);
-
-/*----------------------------------------------------------------------------*
- * NAME
- * CsrThreadSleep
- *
- * DESCRIPTION
- * Sleep for a given period.
- *
- * RETURNS
- * void
- *
- *----------------------------------------------------------------------------*/
void CsrThreadSleep(u16 sleepTimeInMs);
-#ifdef __cplusplus
-}
-#endif
-
#endif
diff --git a/drivers/staging/csr/csr_framework_ext_types.h b/drivers/staging/csr/csr_framework_ext_types.h
index 57194ee..575598c 100644
--- a/drivers/staging/csr/csr_framework_ext_types.h
+++ b/drivers/staging/csr/csr_framework_ext_types.h
@@ -2,11 +2,11 @@
#define CSR_FRAMEWORK_EXT_TYPES_H__
/*****************************************************************************
- (c) Cambridge Silicon Radio Limited 2010
- All rights reserved and confidential information of CSR
+ (c) Cambridge Silicon Radio Limited 2010
+ All rights reserved and confidential information of CSR
- Refer to LICENSE.txt included with this source for details
- on the license terms.
+ Refer to LICENSE.txt included with this source for details
+ on the license terms.
*****************************************************************************/
@@ -17,47 +17,14 @@
#include <pthread.h>
#endif
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-
#ifdef __KERNEL__
-struct CsrThread
-{
- struct task_struct *thread_task;
- char name[16];
-};
-
-struct CsrEvent
-{
- /* wait_queue for waking the kernel thread */
- wait_queue_head_t wakeup_q;
- unsigned int wakeup_flag;
-};
-
-typedef struct CsrEvent CsrEventHandle;
typedef struct semaphore CsrMutexHandle;
-typedef struct CsrThread CsrThreadHandle;
#else /* __KERNEL __ */
-struct CsrEvent
-{
- pthread_cond_t event;
- pthread_mutex_t mutex;
- u32 eventBits;
-};
-
-typedef struct CsrEvent CsrEventHandle;
typedef pthread_mutex_t CsrMutexHandle;
-typedef pthread_t CsrThreadHandle;
#endif /* __KERNEL__ */
-#ifdef __cplusplus
-}
-#endif
-
#endif
diff --git a/drivers/staging/csr/csr_lib.h b/drivers/staging/csr/csr_lib.h
deleted file mode 100644
index b1a57d5..0000000
--- a/drivers/staging/csr/csr_lib.h
+++ /dev/null
@@ -1,188 +0,0 @@
-#ifndef CSR_LIB_H__
-#define CSR_LIB_H__
-/*****************************************************************************
-
- (c) Cambridge Silicon Radio Limited 2010
- All rights reserved and confidential information of CSR
-
- Refer to LICENSE.txt included with this source for details
- on the license terms.
-
-*****************************************************************************/
-
-#include "csr_prim_defs.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef struct
-{
- CsrPrim type;
-} CsrEvent;
-
-/*----------------------------------------------------------------------------*
- * CsrEvent_struct
- *
- * DESCRIPTION
- * Generic message creator.
- * Allocates and fills in a message with the signature CsrEvent
- *
- *----------------------------------------------------------------------------*/
-CsrEvent *CsrEvent_struct(u16 primtype, u16 msgtype);
-
-typedef struct
-{
- CsrPrim type;
- u8 value;
-} CsrEventCsrUint8;
-
-/*----------------------------------------------------------------------------*
- * CsrEventCsrUint8_struct
- *
- * DESCRIPTION
- * Generic message creator.
- * Allocates and fills in a message with the signature CsrEventCsrUint8
- *
- *----------------------------------------------------------------------------*/
-CsrEventCsrUint8 *CsrEventCsrUint8_struct(u16 primtype, u16 msgtype, u8 value);
-
-typedef struct
-{
- CsrPrim type;
- u16 value;
-} CsrEventCsrUint16;
-
-/*----------------------------------------------------------------------------*
- * CsrEventCsrUint16_struct
- *
- * DESCRIPTION
- * Generic message creator.
- * Allocates and fills in a message with the signature CsrEventCsrUint16
- *
- *----------------------------------------------------------------------------*/
-CsrEventCsrUint16 *CsrEventCsrUint16_struct(u16 primtype, u16 msgtype, u16 value);
-
-typedef struct
-{
- CsrPrim type;
- u16 value1;
- u8 value2;
-} CsrEventCsrUint16CsrUint8;
-
-/*----------------------------------------------------------------------------*
- * CsrEventCsrUint16CsrUint8_struct
- *
- * DESCRIPTION
- * Generic message creator.
- * Allocates and fills in a message with the signature CsrEventCsrUint16CsrUint8
- *
- *----------------------------------------------------------------------------*/
-CsrEventCsrUint16CsrUint8 *CsrEventCsrUint16CsrUint8_struct(u16 primtype, u16 msgtype, u16 value1, u8 value2);
-
-typedef struct
-{
- CsrPrim type;
- u16 value1;
- u16 value2;
-} CsrEventCsrUint16CsrUint16;
-
-/*----------------------------------------------------------------------------*
- * CsrEventCsrUint16CsrUint16_struct
- *
- * DESCRIPTION
- * Generic message creator.
- * Allocates and fills in a message with the signature CsrEventCsrUint16CsrUint16
- *
- *----------------------------------------------------------------------------*/
-CsrEventCsrUint16CsrUint16 *CsrEventCsrUint16CsrUint16_struct(u16 primtype, u16 msgtype, u16 value1, u16 value2);
-
-typedef struct
-{
- CsrPrim type;
- u16 value1;
- u32 value2;
-} CsrEventCsrUint16CsrUint32;
-
-/*----------------------------------------------------------------------------*
- * CsrEventCsrUint16_struct
- *
- * DESCRIPTION
- * Generic message creator.
- * Allocates and fills in a message with the signature CsrEventCsrUint16
- *
- *----------------------------------------------------------------------------*/
-CsrEventCsrUint16CsrUint32 *CsrEventCsrUint16CsrUint32_struct(u16 primtype, u16 msgtype, u16 value1, u32 value2);
-
-typedef struct
-{
- CsrPrim type;
- u16 value1;
- char *value2;
-} CsrEventCsrUint16CsrCharString;
-
-/*----------------------------------------------------------------------------*
- * CsrEventCsrUint16CsrCharString_struct
- *
- * DESCRIPTION
- * Generic message creator.
- * Allocates and fills in a message with the signature CsrEventCsrUint16CsrCharString
- *
- *----------------------------------------------------------------------------*/
-CsrEventCsrUint16CsrCharString *CsrEventCsrUint16CsrCharString_struct(u16 primtype, u16 msgtype, u16 value1, char *value2);
-
-typedef struct
-{
- CsrPrim type;
- u32 value;
-} CsrEventCsrUint32;
-
-/*----------------------------------------------------------------------------*
- * CsrEventCsrUint32_struct
- *
- * DESCRIPTION
- * Generic message creator.
- * Allocates and fills in a message with the signature CsrEventCsrUint32
- *
- *----------------------------------------------------------------------------*/
-CsrEventCsrUint32 *CsrEventCsrUint32_struct(u16 primtype, u16 msgtype, u32 value);
-
-typedef struct
-{
- CsrPrim type;
- u32 value1;
- u16 value2;
-} CsrEventCsrUint32CsrUint16;
-
-/*----------------------------------------------------------------------------*
- * CsrEventCsrUint32CsrUint16_struct
- *
- * DESCRIPTION
- * Generic message creator.
- * Allocates and fills in a message with the signature CsrEventCsrUint32CsrUint16
- *
- *----------------------------------------------------------------------------*/
-CsrEventCsrUint32CsrUint16 *CsrEventCsrUint32CsrUint16_struct(u16 primtype, u16 msgtype, u32 value1, u32 value2);
-
-typedef struct
-{
- CsrPrim type;
- u32 value1;
- char *value2;
-} CsrEventCsrUint32CsrCharString;
-
-/*----------------------------------------------------------------------------*
- * CsrEventCsrUint32CsrCharString_struct
- *
- * DESCRIPTION
- * Generic message creator.
- * Allocates and fills in a message with the signature CsrEventCsrUint32CsrCharString
- *
- *----------------------------------------------------------------------------*/
-CsrEventCsrUint32CsrCharString *CsrEventCsrUint32CsrCharString_struct(u16 primtype, u16 msgtype, u32 value1, char *value2);
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* CSR_LIB_H__ */
diff --git a/drivers/staging/csr/csr_log.h b/drivers/staging/csr/csr_log.h
index b280856..5de5650 100644
--- a/drivers/staging/csr/csr_log.h
+++ b/drivers/staging/csr/csr_log.h
@@ -2,23 +2,18 @@
#define CSR_LOG_H__
/*****************************************************************************
- (c) Cambridge Silicon Radio Limited 2010
- All rights reserved and confidential information of CSR
+ (c) Cambridge Silicon Radio Limited 2010
+ All rights reserved and confidential information of CSR
- Refer to LICENSE.txt included with this source for details
- on the license terms.
+ Refer to LICENSE.txt included with this source for details
+ on the license terms.
*****************************************************************************/
#include "csr_sched.h"
-#include "csr_panic.h"
#include "csr_prim_defs.h"
#include "csr_msgconv.h"
-#ifdef __cplusplus
-extern "C" {
-#endif
-
/*
* Log filtering
*/
@@ -77,34 +72,19 @@
/*
* Logging stuff
*/
-#define CSR_LOG_STRINGIFY_REAL(a) #a
+#define CSR_LOG_STRINGIFY_REAL(a) (#a)
#define CSR_LOG_STRINGIFY(a) CSR_LOG_STRINGIFY_REAL(a)
-#ifdef CSR_LOG_ASSERT_ENABLE
-#define CSR_LOG_ASSERT(cond) \
- do { \
- if (!(cond)) \
- { \
- char *panic_arg = "[" __FILE__ ":" CSR_LOG_STRINGIFY(__LINE__) "] - " CSR_LOG_STRINGIFY(cond); \
- CsrPanic(CSR_TECH_FW, CSR_PANIC_FW_ASSERTION_FAIL, panic_arg); \
- } \
- } while (0)
-#else
-#define CSR_LOG_ASSERT(cond)
-#endif
-
-typedef struct
-{
- u16 primitiveType;
- const char *primitiveName;
- CsrMsgConvMsgEntry *messageConv; /* Private - do not use */
+typedef struct {
+ u16 primitiveType;
+ const char *primitiveName;
+ CsrMsgConvMsgEntry *messageConv; /* Private - do not use */
} CsrLogPrimitiveInformation;
-typedef struct
-{
- const char *techVer;
- u32 primitiveInfoCount;
- CsrLogPrimitiveInformation *primitiveInfo;
+typedef struct {
+ const char *techVer;
+ u32 primitiveInfoCount;
+ CsrLogPrimitiveInformation *primitiveInfo;
} CsrLogTechInformation;
/*---------------------------------*/
@@ -118,21 +98,19 @@
#ifdef CSR_LOG_INCLUDE_FILE_NAME_AND_LINE_NUMBER
/* DEPRECATED - replaced by csr_log_text.h */
#define CSR_LOG_TEXT(text) \
- do { \
- if (!CsrLogTaskIsFiltered(CsrSchedTaskQueueGet(), CSR_LOG_LEVEL_TASK_TEXT)) \
- { \
- CsrLogTaskText(text, __LINE__, __FILE__); \
- } \
- } while (0)
+ do { \
+ if (!CsrLogTaskIsFiltered(CsrSchedTaskQueueGet(), CSR_LOG_LEVEL_TASK_TEXT)) { \
+ CsrLogTaskText(text, __LINE__, __FILE__); \
+ } \
+ } while (0)
#else
/* DEPRECATED - replaced by csr_log_text.h */
#define CSR_LOG_TEXT(text) \
- do { \
- if (!CsrLogTaskIsFiltered(CsrSchedTaskQueueGet(), CSR_LOG_LEVEL_TASK_TEXT)) \
- { \
- CsrLogTaskText(text, 0, NULL); \
- } \
- } while (0)
+ do { \
+ if (!CsrLogTaskIsFiltered(CsrSchedTaskQueueGet(), CSR_LOG_LEVEL_TASK_TEXT)) { \
+ CsrLogTaskText(text, 0, NULL); \
+ } \
+ } while (0)
#endif
#else
#define CSR_LOG_TEXT(text)
@@ -140,8 +118,8 @@
/* DEPRECATED - replaced by csr_log_text.h */
void CsrLogTaskText(const char *text,
- u32 line,
- const char *file);
+ u32 line,
+ const char *file);
#define CSR_LOG_STATE_TRANSITION_MASK_FSM_NAME (0x001)
#define CSR_LOG_STATE_TRANSITION_MASK_NEXT_STATE (0x002)
@@ -153,16 +131,16 @@
/* DEPRECATED - replaced by csr_log_text.h */
void CsrLogStateTransition(bitmask16_t mask,
- u32 identifier,
- const char *fsm_name,
- u32 prev_state,
- const char *prev_state_str,
- u32 in_event,
- const char *in_event_str,
- u32 next_state,
- const char *next_state_str,
- u32 line,
- const char *file);
+ u32 identifier,
+ const char *fsm_name,
+ u32 prev_state,
+ const char *prev_state_str,
+ u32 in_event,
+ const char *in_event_str,
+ u32 next_state,
+ const char *next_state_str,
+ u32 line,
+ const char *file);
/*---------------------------------*/
/* BSP logging */
@@ -183,67 +161,63 @@
#define SYNERGY_SERIALIZER_TYPE_SER (0x001)
void CsrLogMessagePut(u32 line,
- const char *file,
- CsrSchedQid src_task_id,
- CsrSchedQid dst_taskid,
- CsrSchedMsgId msg_id,
- u16 prim_type,
- const void *msg);
+ const char *file,
+ CsrSchedQid src_task_id,
+ CsrSchedQid dst_taskid,
+ CsrSchedMsgId msg_id,
+ u16 prim_type,
+ const void *msg);
void CsrLogMessageGet(CsrSchedQid src_task_id,
- CsrSchedQid dst_taskid,
- u8 get_res,
- CsrSchedMsgId msg_id,
- u16 prim_type,
- const void *msg);
+ CsrSchedQid dst_taskid,
+ u8 get_res,
+ CsrSchedMsgId msg_id,
+ u16 prim_type,
+ const void *msg);
void CsrLogTimedEventIn(u32 line,
- const char *file,
- CsrSchedQid task_id,
- CsrSchedTid tid,
- CsrTime requested_delay,
- u16 fniarg,
- const void *fnvarg);
+ const char *file,
+ CsrSchedQid task_id,
+ CsrSchedTid tid,
+ u32 requested_delay,
+ u16 fniarg,
+ const void *fnvarg);
void CsrLogTimedEventFire(CsrSchedQid task_id,
- CsrSchedTid tid);
+ CsrSchedTid tid);
void CsrLogTimedEventDone(CsrSchedQid task_id,
- CsrSchedTid tid);
+ CsrSchedTid tid);
void CsrLogTimedEventCancel(u32 line,
- const char *file,
- CsrSchedQid task_id,
- CsrSchedTid tid,
- u8 cancel_res);
+ const char *file,
+ CsrSchedQid task_id,
+ CsrSchedTid tid,
+ u8 cancel_res);
void CsrLogBgintRegister(u8 thread_id,
- CsrSchedBgint irq,
- const char *callback,
- const void *ptr);
+ CsrSchedBgint irq,
+ const char *callback,
+ const void *ptr);
void CsrLogBgintUnregister(CsrSchedBgint irq);
void CsrLogBgintSet(CsrSchedBgint irq);
void CsrLogBgintServiceStart(CsrSchedBgint irq);
void CsrLogBgintServiceDone(CsrSchedBgint irq);
void CsrLogExceptionStateEvent(u16 prim_type,
- CsrPrim msg_type,
- u16 state,
- u32 line,
- const char *file);
+ CsrPrim msg_type,
+ u16 state,
+ u32 line,
+ const char *file);
void CsrLogExceptionGeneral(u16 prim_type,
- u16 state,
- const char *text,
- u32 line,
- const char *file);
+ u16 state,
+ const char *text,
+ u32 line,
+ const char *file);
void CsrLogExceptionWarning(u16 prim_type,
- u16 state,
- const char *text,
- u32 line,
- const char *file);
-
-#ifdef __cplusplus
-}
-#endif
+ u16 state,
+ const char *text,
+ u32 line,
+ const char *file);
#endif
diff --git a/drivers/staging/csr/csr_log_configure.h b/drivers/staging/csr/csr_log_configure.h
index 8842e4b..283647c 100644
--- a/drivers/staging/csr/csr_log_configure.h
+++ b/drivers/staging/csr/csr_log_configure.h
@@ -2,45 +2,16 @@
#define CSR_LOG_CONFIGURE_H__
/*****************************************************************************
- (c) Cambridge Silicon Radio Limited 2010
- All rights reserved and confidential information of CSR
+ (c) Cambridge Silicon Radio Limited 2010
+ All rights reserved and confidential information of CSR
- Refer to LICENSE.txt included with this source for details
- on the license terms.
+ Refer to LICENSE.txt included with this source for details
+ on the license terms.
-*****************************************************************************/
+ *****************************************************************************/
#include "csr_log.h"
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/*---------------------------------*/
-/* Log init/deinit */
-/*---------------------------------*/
-void CsrLogInit(u8 size);
-void CsrLogDeinit(void);
-
-/*---------------------------------*/
-/* Log Framework Tech info */
-/*---------------------------------*/
-void CsrLogTechInfoRegister(void);
-
-/* Set the logging level for the environment outside the scheduler context */
-void CsrLogLevelEnvironmentSet(CsrLogLevelEnvironment environmentLogLevel);
-
-
-/* Set the logging level for all scheduler tasks */
-/* This function call takes precedence over all previous calls to CsrLogLevelTaskSetSpecific() */
-void CsrLogLevelTaskSetAll(CsrLogLevelTask tasksLogLevelMask);
-
-/* Set the logging level for a given Task */
-/* This function can be used as a complement to CsrLogLevelTaskSetAll() to add more _or_ less log from a given task than what is set
-generally with CsrLogLevelTaskSetAll(). */
-void CsrLogLevelTaskSetSpecific(CsrSchedQid taskId, CsrLogLevelTask taskLogLevelMask);
-
-
/*--------------------------------------------*/
/* Filtering on log text warning levels */
/*--------------------------------------------*/
@@ -65,70 +36,4 @@
* taskId's in the range 0x0600xxxx to 0x06FFxxxx. And so on for other technologies. */
typedef u32 CsrLogTextTaskId;
-/* Set the text logging level for all Tasks */
-/* This function call takes precedence over all previous calls to CsrLogLevelTextSetTask() and CsrLogLevelTextSetTaskSubOrigin() */
-void CsrLogLevelTextSetAll(CsrLogLevelText warningLevelMask);
-
-/* Set the text logging level for a given Task */
-/* This function call takes precedence over all previous calls to CsrLogLevelTextSetTaskSubOrigin(), but it can be used as a complement to
- * CsrLogLevelTextSetAll() to add more _or_ less log from a given task than what is set generally with CsrLogLevelTextSetAll(). */
-void CsrLogLevelTextSetTask(CsrLogTextTaskId taskId, CsrLogLevelText warningLevelMask);
-
-/* Set the text logging level for a given tasks subOrigin */
-/* This function can be used as a complement to CsrLogLevelTextSetAll() and CsrLogLevelTextSetTask() to add more _or_ less log from a given
- * subOrigin within a task than what is set generally with CsrLogLevelTextSetAll() _or_ CsrLogLevelTextSetTask(). */
-void CsrLogLevelTextSetTaskSubOrigin(CsrLogTextTaskId taskId, u16 subOrigin, CsrLogLevelText warningLevelMask);
-
-/*******************************************************************************
-
- NAME
- CsrLogLevelTextSet
-
- DESCRIPTION
- Set the text logging level for a given origin and optionally sub origin
- by name. If either string is NULL or zero length, it is interpreted as
- all origins and/or all sub origins respectively. If originName is NULL
- or zero length, subOriginName is ignored.
-
- Passing NULL or zero length strings in both originName and subOriginName
- is equivalent to calling CsrLogLevelTextSetAll, and overrides all
- previous filter configurations for all origins and sub origins.
-
- Passing NULL or a zero length string in subOriginName overrides all
- previous filter configurations for all sub origins of the specified
- origin.
-
- Note: the supplied strings may be accessed after the function returns
- and must remain valid and constant until CsrLogDeinit is called.
-
- Note: when specifying an origin (originName is not NULL and not zero
- length), this function can only be used for origins that use the
- csr_log_text_2.h interface for registration and logging. Filtering for
- origins that use the legacy csr_log_text.h interface must be be
- configured using the legacy filter configuration functions that accept
- a CsrLogTextTaskId as origin specifier. However, when not specifying an
- origin this function also affects origins that have been registered with
- the legacy csr_log_text.h interface. Furthermore, using this function
- and the legacy filter configuration functions on the same origin is not
- allowed.
-
- PARAMETERS
- originName - a string containing the name of the origin. Can be NULL or
- zero length to set the log level for all origins. In this case, the
- subOriginName parameter will be ignored.
- subOriginName - a string containing the name of the sub origin. Can be
- NULL or zero length to set the log level for all sub origins of the
- specified origin.
- warningLevelMask - The desired log level for the specified origin(s) and
- sub origin(s).
-
-*******************************************************************************/
-void CsrLogLevelTextSet(const char *originName,
- const char *subOriginName,
- CsrLogLevelText warningLevelMask);
-
-#ifdef __cplusplus
-}
-#endif
-
#endif
diff --git a/drivers/staging/csr/csr_log_text.h b/drivers/staging/csr/csr_log_text.h
index 9fe6c90..cfcf64a 100644
--- a/drivers/staging/csr/csr_log_text.h
+++ b/drivers/staging/csr/csr_log_text.h
@@ -12,10 +12,6 @@
#include "csr_log_configure.h"
-#ifdef __cplusplus
-extern "C" {
-#endif
-
typedef struct CsrLogSubOrigin
{
u16 subOriginNumber; /* Id of the given SubOrigin */
@@ -125,8 +121,4 @@
#define CSR_LOG_TEXT_UNHANDLED_PRIMITIVE(origin, suborigin, primClass, primType)
#endif
-#ifdef __cplusplus
-}
-#endif
-
#endif
diff --git a/drivers/staging/csr/csr_macro.h b/drivers/staging/csr/csr_macro.h
index 57cbfcb..c47f1d9 100644
--- a/drivers/staging/csr/csr_macro.h
+++ b/drivers/staging/csr/csr_macro.h
@@ -12,26 +12,10 @@
#include <linux/types.h>
-#ifdef __cplusplus
-extern "C" {
-#endif
-
#define FALSE (0)
#define TRUE (1)
/*------------------------------------------------------------------*/
-/* Bits - intended to operate on u32 values */
-/*------------------------------------------------------------------*/
-#define CSR_MASK_IS_SET(val, mask) (((val) & (mask)) == (mask))
-#define CSR_MASK_IS_UNSET(val, mask) ((((val) & (mask)) ^ mask) == (mask))
-#define CSR_MASK_SET(val, mask) ((val) |= (mask))
-#define CSR_MASK_UNSET(val, mask) ((val) = ((val) ^ (mask)) & (val)) /* Unsets the bits in val that are set in mask */
-#define CSR_BIT_IS_SET(val, bit) ((u8) ((((val) & (1UL << (bit))) != 0)))
-#define CSR_BIT_SET(val, bit) ((val) |= (1UL << (bit)))
-#define CSR_BIT_UNSET(val, bit) ((val) &= ~(1UL << (bit)))
-#define CSR_BIT_TOGGLE(val, bit) ((val) ^= (1UL << (bit)))
-
-/*------------------------------------------------------------------*/
/* Endian conversion */
/*------------------------------------------------------------------*/
#define CSR_GET_UINT16_FROM_LITTLE_ENDIAN(ptr) (((u16) ((u8 *) (ptr))[0]) | ((u16) ((u8 *) (ptr))[1]) << 8)
@@ -43,72 +27,13 @@
((u8 *) (ptr))[1] = ((u8) (((uint) >> 8) & 0x000000FF)); \
((u8 *) (ptr))[2] = ((u8) (((uint) >> 16) & 0x000000FF)); \
((u8 *) (ptr))[3] = ((u8) (((uint) >> 24) & 0x000000FF))
-#define CSR_GET_UINT16_FROM_BIG_ENDIAN(ptr) (((u16) ((u8 *) (ptr))[1]) | ((u16) ((u8 *) (ptr))[0]) << 8)
-#define CSR_GET_UINT24_FROM_BIG_ENDIAN(ptr) (((u32) ((u8 *) (ptr))[2]) | \
- ((u32) ((u8 *) (ptr))[1]) << 8 | ((u32) ((u8 *) (ptr))[0]) << 16)
-#define CSR_GET_UINT32_FROM_BIG_ENDIAN(ptr) (((u32) ((u8 *) (ptr))[3]) | ((u32) ((u8 *) (ptr))[2]) << 8 | \
- ((u32) ((u8 *) (ptr))[1]) << 16 | ((u32) ((u8 *) (ptr))[0]) << 24)
-#define CSR_COPY_UINT16_TO_BIG_ENDIAN(uint, ptr) ((u8 *) (ptr))[1] = ((u8) ((uint) & 0x00FF)); \
- ((u8 *) (ptr))[0] = ((u8) ((uint) >> 8))
-#define CSR_COPY_UINT24_TO_BIG_ENDIAN(uint, ptr) ((u8 *) (ptr))[2] = ((u8) ((uint) & 0x000000FF)); \
- ((u8 *) (ptr))[1] = ((u8) (((uint) >> 8) & 0x000000FF)); \
- ((u8 *) (ptr))[0] = ((u8) (((uint) >> 16) & 0x000000FF))
-#define CSR_COPY_UINT32_TO_BIG_ENDIAN(uint, ptr) ((u8 *) (ptr))[3] = ((u8) ((uint) & 0x000000FF)); \
- ((u8 *) (ptr))[2] = ((u8) (((uint) >> 8) & 0x000000FF)); \
- ((u8 *) (ptr))[1] = ((u8) (((uint) >> 16) & 0x000000FF)); \
- ((u8 *) (ptr))[0] = ((u8) (((uint) >> 24) & 0x000000FF))
-
-/*------------------------------------------------------------------*/
-/* XAP conversion macros */
-/*------------------------------------------------------------------*/
-
-#define CSR_LSB16(a) ((u8) ((a) & 0x00ff))
-#define CSR_MSB16(b) ((u8) ((b) >> 8))
-
-#define CSR_CONVERT_8_FROM_XAP(output, input) \
- (output) = ((u8) (input));(input) += 2
-
-#define CSR_CONVERT_16_FROM_XAP(output, input) \
- (output) = (u16) ((((u16) (input)[1]) << 8) | \
- ((u16) (input)[0]));(input) += 2
-
-#define CSR_CONVERT_32_FROM_XAP(output, input) \
- (output) = (((u32) (input)[1]) << 24) | \
- (((u32) (input)[0]) << 16) | \
- (((u32) (input)[3]) << 8) | \
- ((u32) (input)[2]);input += 4
-
-#define CSR_ADD_UINT8_TO_XAP(output, input) \
- (output)[0] = (input); \
- (output)[1] = 0;(output) += 2
-
-#define CSR_ADD_UINT16_TO_XAP(output, input) \
- (output)[0] = ((u8) ((input) & 0x00FF)); \
- (output)[1] = ((u8) ((input) >> 8));(output) += 2
-
-#define CSR_ADD_UINT32_TO_XAP(output, input) \
- (output)[0] = ((u8) (((input) >> 16) & 0x00FF)); \
- (output)[1] = ((u8) ((input) >> 24)); \
- (output)[2] = ((u8) ((input) & 0x00FF)); \
- (output)[3] = ((u8) (((input) >> 8) & 0x00FF));(output) += 4
/*------------------------------------------------------------------*/
/* Misc */
/*------------------------------------------------------------------*/
-#define CSRMAX(a, b) (((a) > (b)) ? (a) : (b))
-#define CSRMIN(a, b) (((a) < (b)) ? (a) : (b))
-
/* Use this macro on unused local variables that cannot be removed (such as
unused function parameters). This will quell warnings from certain compilers
and static code analysis tools like Lint and Valgrind. */
#define CSR_UNUSED(x) ((void) (x))
-#define CSR_TOUPPER(character) (((character) >= 'a') && ((character) <= 'z') ? ((character) - 0x20) : (character))
-#define CSR_TOLOWER(character) (((character) >= 'A') && ((character) <= 'Z') ? ((character) + 0x20) : (character))
-#define CSR_ARRAY_SIZE(x) (sizeof(x) / sizeof(*(x)))
-
-#ifdef __cplusplus
-}
-#endif
-
#endif
diff --git a/drivers/staging/csr/csr_msg_transport.h b/drivers/staging/csr/csr_msg_transport.h
index b0095b0..8d88e78 100644
--- a/drivers/staging/csr/csr_msg_transport.h
+++ b/drivers/staging/csr/csr_msg_transport.h
@@ -10,16 +10,8 @@
*****************************************************************************/
-#ifdef __cplusplus
-extern "C" {
-#endif
-
#ifndef CsrMsgTransport
#define CsrMsgTransport CsrSchedMessagePut
#endif
-#ifdef __cplusplus
-}
-#endif
-
#endif /* CSR_MSG_TRANSPORT */
diff --git a/drivers/staging/csr/csr_msgconv.c b/drivers/staging/csr/csr_msgconv.c
index 0081a25..db5e845 100644
--- a/drivers/staging/csr/csr_msgconv.c
+++ b/drivers/staging/csr/csr_msgconv.c
@@ -11,7 +11,6 @@
#include <linux/module.h>
#include <linux/types.h>
#include <linux/slab.h>
-#include "csr_panic.h"
#include "csr_sched.h"
#include "csr_msgconv.h"
#include "csr_macro.h"
diff --git a/drivers/staging/csr/csr_msgconv.h b/drivers/staging/csr/csr_msgconv.h
index 09489f3..7e4dd38 100644
--- a/drivers/staging/csr/csr_msgconv.h
+++ b/drivers/staging/csr/csr_msgconv.h
@@ -15,10 +15,6 @@
#include "csr_prim_defs.h"
#include "csr_sched.h"
-#ifdef __cplusplus
-extern "C" {
-#endif
-
typedef size_t (CsrMsgSizeofFunc)(void *msg);
typedef u8 *(CsrMsgSerializeFunc)(u8 *buffer, size_t *length, void *msg);
typedef void (CsrMsgFreeFunc)(void *msg);
@@ -79,9 +75,4 @@
void CsrMemCpyDes(void *value, u8 *buffer, size_t *offset, size_t length);
void CsrCharStringDes(char **value, u8 *buffer, size_t *offset);
-
-#ifdef __cplusplus
-}
-#endif
-
#endif
diff --git a/drivers/staging/csr/csr_panic.c b/drivers/staging/csr/csr_panic.c
deleted file mode 100644
index 095f7fa..0000000
--- a/drivers/staging/csr/csr_panic.c
+++ /dev/null
@@ -1,20 +0,0 @@
-/*****************************************************************************
-
- (c) Cambridge Silicon Radio Limited 2010
- All rights reserved and confidential information of CSR
-
- Refer to LICENSE.txt included with this source for details
- on the license terms.
-
-*****************************************************************************/
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-
-#include "csr_panic.h"
-
-void CsrPanic(u8 tech, u16 reason, const char *p)
-{
- BUG_ON(1);
-}
-EXPORT_SYMBOL_GPL(CsrPanic);
diff --git a/drivers/staging/csr/csr_panic.h b/drivers/staging/csr/csr_panic.h
deleted file mode 100644
index 37989fc..0000000
--- a/drivers/staging/csr/csr_panic.h
+++ /dev/null
@@ -1,53 +0,0 @@
-#ifndef CSR_PANIC_H__
-#define CSR_PANIC_H__
-/*****************************************************************************
-
- (c) Cambridge Silicon Radio Limited 2010
- All rights reserved and confidential information of CSR
-
- Refer to LICENSE.txt included with this source for details
- on the license terms.
-
-*****************************************************************************/
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* Synergy techonology ID definitions */
-#define CSR_TECH_FW 0
-#define CSR_TECH_BT 1
-#define CSR_TECH_WIFI 2
-#define CSR_TECH_GPS 3
-#define CSR_TECH_NFC 4
-
-/* Panic type ID definitions for technology type CSR_TECH_FW */
-#define CSR_PANIC_FW_UNEXPECTED_VALUE 0
-#define CSR_PANIC_FW_HEAP_EXHAUSTION 1
-#define CSR_PANIC_FW_INVALID_PFREE_POINTER 2
-#define CSR_PANIC_FW_EXCEPTION 3
-#define CSR_PANIC_FW_ASSERTION_FAIL 4
-#define CSR_PANIC_FW_NULL_TASK_HANDLER 5
-#define CSR_PANIC_FW_UNKNOWN_TASK 6
-#define CSR_PANIC_FW_QUEUE_ACCESS_VIOLATION 7
-#define CSR_PANIC_FW_TOO_MANY_MESSAGES 8
-#define CSR_PANIC_FW_TOO_MANY_TIMED_EVENTS 9
-#define CSR_PANIC_FW_ABCSP_SYNC_LOST 10
-#define CSR_PANIC_FW_OVERSIZE_ABCSP_PRIM 11
-#define CSR_PANIC_FW_H4_CORRUPTION 12
-#define CSR_PANIC_FW_H4_SYNC_LOST 13
-#define CSR_PANIC_FW_H4_RX_OVERRUN 14
-#define CSR_PANIC_FW_H4_TX_OVERRUN 15
-#define CSR_PANIC_FW_TM_BC_RESTART_FAIL 16
-#define CSR_PANIC_FW_TM_BC_START_FAIL 17
-#define CSR_PANIC_FW_TM_BC_BAD_STATE 18
-#define CSR_PANIC_FW_TM_BC_TRANSPORT_LOST 19
-
-/* Panic interface used by technologies */
-/* DEPRECATED - replaced by csr_log_text.h */
-void CsrPanic(u8 tech, u16 reason, const char *p);
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* CSR_PANIC_H__ */
diff --git a/drivers/staging/csr/csr_prim_defs.h b/drivers/staging/csr/csr_prim_defs.h
index 6a7f73d..81a1eaa 100644
--- a/drivers/staging/csr/csr_prim_defs.h
+++ b/drivers/staging/csr/csr_prim_defs.h
@@ -9,9 +9,6 @@
on the license terms.
*****************************************************************************/
-#ifdef __cplusplus
-extern "C" {
-#endif
/************************************************************************************
* Segmentation of primitives in upstream and downstream segment
@@ -55,8 +52,4 @@
#define CSR_ENV_PRIM ((u16) (0x00FF | CSR_SYNERGY_EVENT_CLASS_MISC_BASE))
-#ifdef __cplusplus
-}
-#endif
-
#endif /* CSR_PRIM_DEFS_H__ */
diff --git a/drivers/staging/csr/csr_result.h b/drivers/staging/csr/csr_result.h
index c7c36d6..cbb607d 100644
--- a/drivers/staging/csr/csr_result.h
+++ b/drivers/staging/csr/csr_result.h
@@ -10,16 +10,8 @@
*****************************************************************************/
-#ifdef __cplusplus
-extern "C" {
-#endif
-
typedef u16 CsrResult;
#define CSR_RESULT_SUCCESS ((CsrResult) 0x0000)
#define CSR_RESULT_FAILURE ((CsrResult) 0xFFFF)
-#ifdef __cplusplus
-}
-#endif
-
#endif
diff --git a/drivers/staging/csr/csr_sched.h b/drivers/staging/csr/csr_sched.h
index cc1b8bf..c7d672c 100644
--- a/drivers/staging/csr/csr_sched.h
+++ b/drivers/staging/csr/csr_sched.h
@@ -12,10 +12,6 @@
#include <linux/types.h>
#include "csr_time.h"
-#ifdef __cplusplus
-extern "C" {
-#endif
-
/* An identifier issued by the scheduler. */
typedef u32 CsrSchedIdentifier;
@@ -24,7 +20,6 @@
/* A queue identifier */
typedef u16 CsrSchedQid;
-#define CSR_SCHED_QID_INVALID ((CsrSchedQid) 0xFFFF)
/* A message identifier */
typedef CsrSchedIdentifier CsrSchedMsgId;
@@ -33,14 +28,11 @@
typedef CsrSchedIdentifier CsrSchedTid;
#define CSR_SCHED_TID_INVALID ((CsrSchedTid) 0)
-/* Scheduler entry functions share this structure */
-typedef void (*schedEntryFunction_t)(void **inst);
-
/* Time constants. */
-#define CSR_SCHED_TIME_MAX ((CsrTime) 0xFFFFFFFF)
-#define CSR_SCHED_MILLISECOND ((CsrTime) (1000))
-#define CSR_SCHED_SECOND ((CsrTime) (1000 * CSR_SCHED_MILLISECOND))
-#define CSR_SCHED_MINUTE ((CsrTime) (60 * CSR_SCHED_SECOND))
+#define CSR_SCHED_TIME_MAX (0xFFFFFFFF)
+#define CSR_SCHED_MILLISECOND (1000)
+#define CSR_SCHED_SECOND (1000 * CSR_SCHED_MILLISECOND)
+#define CSR_SCHED_MINUTE (60 * CSR_SCHED_SECOND)
/* Queue and primitive that identifies the environment */
#define CSR_SCHED_TASK_ID 0xFFFF
@@ -53,60 +45,6 @@
typedef u16 CsrSchedBgint;
#define CSR_SCHED_BGINT_INVALID ((CsrSchedBgint) 0xFFFF)
-typedef void (*CsrSchedBgintHandler)(void *);
-
-/*----------------------------------------------------------------------------*
- * NAME
- * CsrSchedBgintReg
- *
- * DESCRIPTION
- * Register a background interrupt handler function with the scheduler.
- * When CsrSchedBgint() is called from the foreground (e.g. an interrupt
- * routine) the registered function is called.
- *
- * If "cb" is null then the interrupt is effectively disabled. If a
- * no bgints are available, CSR_SCHED_BGINT_INVALID is returned, otherwise
- * a CsrSchedBgint value is returned to be used in subsequent calls to
- * CsrSchedBgint(). id is a possibly NULL identifier used for logging
- * purposes only.
- *
- * RETURNS
- * CsrSchedBgint -- CSR_SCHED_BGINT_INVALID denotes failure to obtain a CsrSchedBgintSet.
- *
- *----------------------------------------------------------------------------*/
-CsrSchedBgint CsrSchedBgintReg(CsrSchedBgintHandler cb,
- void *context,
- const char *id);
-
-/*----------------------------------------------------------------------------*
- * NAME
- * CsrSchedBgintUnreg
- *
- * DESCRIPTION
- * Unregister a background interrupt handler function.
- *
- * ``irq'' is a background interrupt handle previously obtained
- * from a call to CsrSchedBgintReg().
- *
- * RETURNS
- * void.
- *
- *----------------------------------------------------------------------------*/
-void CsrSchedBgintUnreg(CsrSchedBgint bgint);
-
-/*----------------------------------------------------------------------------*
- * NAME
- * CsrSchedBgintSet
- *
- * DESCRIPTION
- * Set background interrupt.
- *
- * RETURNS
- * void.
- *
- *----------------------------------------------------------------------------*/
-void CsrSchedBgintSet(CsrSchedBgint bgint);
-
/*----------------------------------------------------------------------------*
* NAME
* CsrSchedMessagePut
@@ -144,149 +82,4 @@
void *mv);
#endif
-/*----------------------------------------------------------------------------*
- * NAME
- * CsrSchedMessageBroadcast
- *
- * DESCRIPTION
- * Sends a message to all tasks.
- *
- * The user must supply a "factory function" that is called once
- * for every task that exists. The "factory function", msg_build_func,
- * must allocate and initialise the message and set the msg_build_ptr
- * to point to the message when done.
- *
- * NOTE
- * N/A
- *
- * RETURNS
- * void
- *
- *----------------------------------------------------------------------------*/
-#if defined(CSR_LOG_ENABLE) && defined(CSR_LOG_INCLUDE_FILE_NAME_AND_LINE_NUMBER)
-void CsrSchedMessageBroadcastStringLog(u16 mi,
- void *(*msg_build_func)(void *),
- void *msg_build_ptr,
- u32 line,
- const char *file);
-#define CsrSchedMessageBroadcast(mi, fn, ptr) CsrSchedMessageBroadcastStringLog((mi), (fn), (ptr), __LINE__, __FILE__)
-#else
-void CsrSchedMessageBroadcast(u16 mi,
- void *(*msg_build_func)(void *),
- void *msg_build_ptr);
-#endif
-
-/*----------------------------------------------------------------------------*
- * NAME
- * CsrSchedMessageGet
- *
- * DESCRIPTION
- * Obtains a message from the message queue belonging to the calling task.
- * The message consists of one or both of a u16 and a void *.
- *
- * RETURNS
- * u8 - TRUE if a message has been obtained from the queue, else FALSE.
- * If a message is taken from the queue, then "*pmi" and "*pmv" are set to
- * the "mi" and "mv" passed to CsrSchedMessagePut() respectively.
- *
- * "pmi" and "pmv" can be null, in which case the corresponding value from
- * them message is discarded.
- *
- *----------------------------------------------------------------------------*/
-u8 CsrSchedMessageGet(u16 *pmi, void **pmv);
-
-/*----------------------------------------------------------------------------*
- * NAME
- * CsrSchedTimerSet
- *
- * DESCRIPTION
- * Causes the void function "fn" to be called with the arguments
- * "fniarg" and "fnvarg" after "delay" has elapsed.
- *
- * "delay" must be less than half the range of a CsrTime.
- *
- * CsrSchedTimerSet() does nothing with "fniarg" and "fnvarg" except
- * deliver them via a call to "fn()". (Unless CsrSchedTimerCancel()
- * is used to prevent delivery.)
- *
- * NOTE
- * The function will be called at or after "delay"; the actual delay will
- * depend on the timing behaviour of the scheduler's tasks.
- *
- * RETURNS
- * CsrSchedTid - A timed event identifier, can be used in CsrSchedTimerCancel().
- *
- *----------------------------------------------------------------------------*/
-#if defined(CSR_LOG_ENABLE) && defined(CSR_LOG_INCLUDE_FILE_NAME_AND_LINE_NUMBER)
-CsrSchedTid CsrSchedTimerSetStringLog(CsrTime delay,
- void (*fn)(u16 mi, void *mv),
- u16 fniarg,
- void *fnvarg,
- u32 line,
- const char *file);
-#define CsrSchedTimerSet(d, fn, fni, fnv) CsrSchedTimerSetStringLog((d), (fn), (fni), (fnv), __LINE__, __FILE__)
-#else
-CsrSchedTid CsrSchedTimerSet(CsrTime delay,
- void (*fn)(u16 mi, void *mv),
- u16 fniarg,
- void *fnvarg);
-#endif
-
-/*----------------------------------------------------------------------------*
- * NAME
- * CsrSchedTimerCancel
- *
- * DESCRIPTION
- * Attempts to prevent the timed event with identifier "eventid" from
- * occurring.
- *
- * RETURNS
- * u8 - TRUE if cancelled, FALSE if the event has already occurred.
- *
- *----------------------------------------------------------------------------*/
-#if defined(CSR_LOG_ENABLE) && defined(CSR_LOG_INCLUDE_FILE_NAME_AND_LINE_NUMBER)
-u8 CsrSchedTimerCancelStringLog(CsrSchedTid eventid,
- u16 *pmi,
- void **pmv,
- u32 line,
- const char *file);
-#define CsrSchedTimerCancel(e, pmi, pmv) CsrSchedTimerCancelStringLog((e), (pmi), (pmv), __LINE__, __FILE__)
-#else
-u8 CsrSchedTimerCancel(CsrSchedTid eventid,
- u16 *pmi,
- void **pmv);
-#endif
-
-/*----------------------------------------------------------------------------*
- * NAME
- * CsrSchedTaskQueueGet
- *
- * DESCRIPTION
- * Return the queue identifier for the currently running queue
- *
- * RETURNS
- * CsrSchedQid - The current task queue identifier, or 0xFFFF if not available.
- *
- *----------------------------------------------------------------------------*/
-CsrSchedQid CsrSchedTaskQueueGet(void);
-
-
-/*----------------------------------------------------------------------------*
- * NAME
- * CsrSchedTaskQueueGet
- *
- * DESCRIPTION
- * Return the queue identifier for the currently running queue
- *
- * RETURNS
- * char - The current task queue identifier, or 0xFFFF if not available.
- *
- *----------------------------------------------------------------------------*/
-char* CsrSchedTaskNameGet(CsrSchedQid );
-
-
-#ifdef __cplusplus
-}
-#endif
-
#endif
diff --git a/drivers/staging/csr/csr_sdio.h b/drivers/staging/csr/csr_sdio.h
index f0cda84..624a53f 100644
--- a/drivers/staging/csr/csr_sdio.h
+++ b/drivers/staging/csr/csr_sdio.h
@@ -12,10 +12,6 @@
#include "csr_result.h"
-#ifdef __cplusplus
-extern "C" {
-#endif
-
/* Result Codes */
#define CSR_SDIO_RESULT_INVALID_VALUE ((CsrResult) 1) /* Invalid argument value */
#define CSR_SDIO_RESULT_NO_DEVICE ((CsrResult) 2) /* The specified device is no longer present */
@@ -724,8 +720,4 @@
void CsrSdioFunctionActive(CsrSdioFunction *function);
void CsrSdioFunctionIdle(CsrSdioFunction *function);
-#ifdef __cplusplus
-}
-#endif
-
#endif
diff --git a/drivers/staging/csr/csr_serialize_primitive_types.c b/drivers/staging/csr/csr_serialize_primitive_types.c
index bf5e4ab..9713b9a 100644
--- a/drivers/staging/csr/csr_serialize_primitive_types.c
+++ b/drivers/staging/csr/csr_serialize_primitive_types.c
@@ -13,7 +13,6 @@
#include "csr_prim_defs.h"
#include "csr_msgconv.h"
#include "csr_macro.h"
-#include "csr_lib.h"
void CsrUint8Des(u8 *value, u8 *buffer, size_t *offset)
{
diff --git a/drivers/staging/csr/csr_time.c b/drivers/staging/csr/csr_time.c
index 7b597f7..f3f4a9c 100644
--- a/drivers/staging/csr/csr_time.c
+++ b/drivers/staging/csr/csr_time.c
@@ -9,25 +9,24 @@
*****************************************************************************/
#include <linux/kernel.h>
-#include <linux/version.h>
#include <linux/time.h>
#include <linux/module.h>
#include "csr_time.h"
-CsrTime CsrTimeGet(CsrTime *high)
+u32 CsrTimeGet(u32 *high)
{
struct timespec ts;
u64 time;
- CsrTime low;
+ u32 low;
ts = current_kernel_time();
time = (u64) ts.tv_sec * 1000000 + ts.tv_nsec / 1000;
if (high != NULL)
- *high = (CsrTime) ((time >> 32) & 0xFFFFFFFF);
+ *high = (u32) ((time >> 32) & 0xFFFFFFFF);
- low = (CsrTime) (time & 0xFFFFFFFF);
+ low = (u32) (time & 0xFFFFFFFF);
return low;
}
diff --git a/drivers/staging/csr/csr_time.h b/drivers/staging/csr/csr_time.h
index 2a45f3e..fc29e8e 100644
--- a/drivers/staging/csr/csr_time.h
+++ b/drivers/staging/csr/csr_time.h
@@ -2,77 +2,43 @@
#define CSR_TIME_H__
/*****************************************************************************
- (c) Cambridge Silicon Radio Limited 2010
- All rights reserved and confidential information of CSR
+(c) Cambridge Silicon Radio Limited 2010
+All rights reserved and confidential information of CSR
- Refer to LICENSE.txt included with this source for details
- on the license terms.
+Refer to LICENSE.txt included with this source for details
+on the license terms.
*****************************************************************************/
#include <linux/types.h>
-#ifdef __cplusplus
-extern "C" {
-#endif
-
/*******************************************************************************
- NAME
- CsrTime
+NAME
+ CsrTimeGet
- DESCRIPTION
- Type to hold a value describing the current system time, which is a
- measure of time elapsed since some arbitrarily defined fixed time
- reference, usually associated with system startup.
+DESCRIPTION
+ Returns the current system time in a low and a high part. The low part
+ is expressed in microseconds. The high part is incremented when the low
+ part wraps to provide an extended range.
+
+ The caller may provide a NULL pointer as the high parameter.
+ In this case the function just returns the low part and ignores the
+ high parameter.
+
+ Although the time is expressed in microseconds the actual resolution is
+ platform dependent and can be less. It is recommended that the
+ resolution is at least 10 milliseconds.
+
+PARAMETERS
+ high - Pointer to variable that will receive the high part of the
+ current system time. Passing NULL is valid.
+
+RETURNS
+ Low part of current system time in microseconds.
*******************************************************************************/
-typedef u32 CsrTime;
-
-
-/*******************************************************************************
-
- NAME
- CsrTimeUtc
-
- DESCRIPTION
- Type to hold a value describing a UTC wallclock time expressed in
- seconds and milliseconds elapsed since midnight January 1st 1970.
-
-*******************************************************************************/
-typedef struct
-{
- u32 sec;
- u16 msec;
-} CsrTimeUtc;
-
-
-/*******************************************************************************
-
- NAME
- CsrTimeGet
-
- DESCRIPTION
- Returns the current system time in a low and a high part. The low part
- is expressed in microseconds. The high part is incremented when the low
- part wraps to provide an extended range.
-
- The caller may provide a NULL pointer as the high parameter. In this case
- the function just returns the low part and ignores the high parameter.
-
- Although the time is expressed in microseconds the actual resolution is
- platform dependent and can be less. It is recommended that the
- resolution is at least 10 milliseconds.
-
- PARAMETERS
- high - Pointer to variable that will receive the high part of the
- current system time. Passing NULL is valid.
-
- RETURNS
- Low part of current system time in microseconds.
-
-*******************************************************************************/
-CsrTime CsrTimeGet(CsrTime *high);
+u32 CsrTimeGet(u32 *high);
/*------------------------------------------------------------------*/
@@ -107,8 +73,4 @@
*----------------------------------------------------------------------------*/
#define CsrTimeSub(t1, t2) ((s32) (t1) - (s32) (t2))
-#ifdef __cplusplus
-}
-#endif
-
#endif
diff --git a/drivers/staging/csr/csr_wifi_common.h b/drivers/staging/csr/csr_wifi_common.h
index cc41a94..efc43a5 100644
--- a/drivers/staging/csr/csr_wifi_common.h
+++ b/drivers/staging/csr/csr_wifi_common.h
@@ -14,10 +14,6 @@
#include <linux/types.h>
#include "csr_result.h"
-#ifdef __cplusplus
-extern "C" {
-#endif
-
/* MAC address */
typedef struct
{
@@ -101,9 +97,5 @@
#define CSR_WIFI_VERSION "5.1.0.0"
-#ifdef __cplusplus
-}
-#endif
-
#endif
diff --git a/drivers/staging/csr/csr_wifi_fsm.h b/drivers/staging/csr/csr_wifi_fsm.h
index 073e2f8..fde1508 100644
--- a/drivers/staging/csr/csr_wifi_fsm.h
+++ b/drivers/staging/csr/csr_wifi_fsm.h
@@ -11,10 +11,6 @@
#ifndef CSR_WIFI_FSM_H
#define CSR_WIFI_FSM_H
-#ifdef __cplusplus
-extern "C" {
-#endif
-
#include "csr_prim_defs.h"
#include "csr_log_text.h"
#include "csr_wifi_fsm_event.h"
@@ -240,9 +236,5 @@
*/
extern void CsrWifiFsmInstallWakeupCallback(CsrWifiFsmContext *context, CsrWifiFsmExternalWakupCallbackPtr callback);
-#ifdef __cplusplus
-}
-#endif
-
#endif /* CSR_WIFI_FSM_H */
diff --git a/drivers/staging/csr/csr_wifi_fsm_event.h b/drivers/staging/csr/csr_wifi_fsm_event.h
index 57a5caf..0690ca9 100644
--- a/drivers/staging/csr/csr_wifi_fsm_event.h
+++ b/drivers/staging/csr/csr_wifi_fsm_event.h
@@ -11,10 +11,6 @@
#ifndef CSR_WIFI_FSM_EVENT_H
#define CSR_WIFI_FSM_EVENT_H
-#ifdef __cplusplus
-extern "C" {
-#endif
-
#include "csr_prim_defs.h"
#include "csr_sched.h"
@@ -42,9 +38,5 @@
struct CsrWifiFsmEvent *next;
} CsrWifiFsmEvent;
-#ifdef __cplusplus
-}
-#endif
-
#endif /* CSR_WIFI_FSM_EVENT_H */
diff --git a/drivers/staging/csr/csr_wifi_fsm_types.h b/drivers/staging/csr/csr_wifi_fsm_types.h
index 26752bf3..d21c60a 100644
--- a/drivers/staging/csr/csr_wifi_fsm_types.h
+++ b/drivers/staging/csr/csr_wifi_fsm_types.h
@@ -11,13 +11,8 @@
#ifndef CSR_WIFI_FSM_TYPES_H
#define CSR_WIFI_FSM_TYPES_H
-#ifdef __cplusplus
-extern "C" {
-#endif
-
#include <linux/types.h>
#include "csr_macro.h"
-#include "csr_panic.h"
#include "csr_sched.h"
#ifdef CSR_WIFI_FSM_MUTEX_ENABLE
@@ -432,9 +427,4 @@
#endif
};
-
-#ifdef __cplusplus
-}
-#endif
-
#endif /* CSR_WIFI_FSM_TYPES_H */
diff --git a/drivers/staging/csr/csr_wifi_hip_card.h b/drivers/staging/csr/csr_wifi_hip_card.h
index 9caf88c..bd47f60 100644
--- a/drivers/staging/csr/csr_wifi_hip_card.h
+++ b/drivers/staging/csr/csr_wifi_hip_card.h
@@ -21,10 +21,6 @@
#ifndef __CARD_H__
#define __CARD_H__
-#ifdef __cplusplus
-extern "C" {
-#endif
-
#include "csr_wifi_hip_card_sdio.h"
#include "csr_wifi_hip_signals.h"
#include "csr_wifi_hip_unifi_udi.h"
@@ -115,9 +111,4 @@
void unifi_debug_hex_to_buf(const char *buff, u16 length);
#endif
-
-#ifdef __cplusplus
-}
-#endif
-
#endif /* __CARD_H__ */
diff --git a/drivers/staging/csr/csr_wifi_hip_card_sdio.c b/drivers/staging/csr/csr_wifi_hip_card_sdio.c
index cf148a0..25cabf32 100644
--- a/drivers/staging/csr/csr_wifi_hip_card_sdio.c
+++ b/drivers/staging/csr/csr_wifi_hip_card_sdio.c
@@ -70,8 +70,6 @@
card_t *card;
u32 i;
- func_enter();
-
card = kzalloc(sizeof(card_t), GFP_KERNEL);
if (card == NULL)
@@ -148,7 +146,6 @@
}
}
#endif
- func_exit();
return card;
} /* unifi_alloc_card() */
@@ -171,35 +168,29 @@
{
CsrResult r;
- func_enter();
if (card == NULL)
{
- func_exit_r(CSR_WIFI_HIP_RESULT_INVALID_VALUE);
return CSR_WIFI_HIP_RESULT_INVALID_VALUE;
}
r = unifi_init(card);
if (r != CSR_RESULT_SUCCESS)
{
- func_exit_r(r);
return r;
}
r = unifi_hip_init(card);
if (r == CSR_WIFI_HIP_RESULT_NO_DEVICE)
{
- func_exit_r(r);
return r;
}
if (r != CSR_RESULT_SUCCESS)
{
unifi_error(card->ospriv, "Failed to start host protocol.\n");
- func_exit_r(r);
return r;
}
- func_exit();
return CSR_RESULT_SUCCESS;
}
@@ -223,11 +214,8 @@
CsrResult r;
CsrResult csrResult;
- func_enter();
-
if (card == NULL)
{
- func_exit_r(CSR_WIFI_HIP_RESULT_INVALID_VALUE);
return CSR_WIFI_HIP_RESULT_INVALID_VALUE;
}
@@ -250,7 +238,6 @@
if (csrResult != CSR_RESULT_SUCCESS)
{
r = ConvertCsrSdioToCsrHipResult(card, csrResult);
- func_exit_r(r);
return r;
}
card->sdio_clock_speed = UNIFI_SDIO_CLOCK_SAFE_HZ;
@@ -268,7 +255,6 @@
if (r != CSR_RESULT_SUCCESS)
{
unifi_error(card->ospriv, "Failed to reset UniFi\n");
- func_exit_r(r);
return r;
}
@@ -278,7 +264,6 @@
if (r != CSR_RESULT_SUCCESS)
{
unifi_error(card->ospriv, "Failed to set power save mode\n");
- func_exit_r(r);
return r;
}
@@ -298,7 +283,6 @@
if (r != CSR_RESULT_SUCCESS)
{
unifi_error(card->ospriv, "Failed to write SHARED_DMEM_PAGE\n");
- func_exit_r(r);
return r;
}
r = unifi_write_direct16(card, ChipHelper_HOST_WINDOW2_PAGE(card->helper) * 2, 0);
@@ -309,7 +293,6 @@
if (r != CSR_RESULT_SUCCESS)
{
unifi_error(card->ospriv, "Failed to write PROG_MEM2_PAGE\n");
- func_exit_r(r);
return r;
}
@@ -338,7 +321,6 @@
unifi_error(card->ospriv, "Probe for Flash failed\n");
}
- func_exit_r(r);
return r;
} /* unifi_init() */
@@ -363,11 +345,8 @@
CsrResult r;
void *dlpriv;
- func_enter();
-
if (card == NULL)
{
- func_exit_r(CSR_WIFI_HIP_RESULT_INVALID_VALUE);
return CSR_WIFI_HIP_RESULT_INVALID_VALUE;
}
@@ -380,7 +359,6 @@
dlpriv = unifi_dl_fw_read_start(card, UNIFI_FW_STA);
if (dlpriv == NULL)
{
- func_exit_r(CSR_WIFI_HIP_RESULT_NOT_FOUND);
return CSR_WIFI_HIP_RESULT_NOT_FOUND;
}
@@ -389,15 +367,12 @@
if (r != CSR_RESULT_SUCCESS)
{
unifi_error(card->ospriv, "Failed to download firmware\n");
- func_exit_r(r);
return r;
}
/* Free the firmware file information. */
unifi_fw_read_stop(card->ospriv, dlpriv);
- func_exit();
-
return CSR_RESULT_SUCCESS;
} /* unifi_download() */
@@ -425,8 +400,6 @@
CsrResult r;
CsrResult csrResult;
- func_enter();
-
r = card_hw_init(card);
if (r == CSR_WIFI_HIP_RESULT_NO_DEVICE)
{
@@ -435,7 +408,6 @@
if (r != CSR_RESULT_SUCCESS)
{
unifi_error(card->ospriv, "Failed to establish communication with UniFi\n");
- func_exit_r(r);
return r;
}
#ifdef CSR_PRE_ALLOC_NET_DATA
@@ -455,7 +427,6 @@
if (r != CSR_RESULT_SUCCESS)
{
unifi_error(card->ospriv, "Init slots failed: %d\n", r);
- func_exit_r(r);
return r;
}
@@ -464,7 +435,6 @@
r = unifi_set_host_state(card, UNIFI_HOST_STATE_AWAKE);
if (r != CSR_RESULT_SUCCESS)
{
- func_exit_r(r);
return r;
}
@@ -479,12 +449,9 @@
r = CardGenInt(card);
if (r != CSR_RESULT_SUCCESS)
{
- func_exit_r(r);
return r;
}
- func_exit();
-
return CSR_RESULT_SUCCESS;
} /* unifi_hip_init() */
@@ -609,8 +576,6 @@
s16 search_4slut_again;
CsrResult csrResult;
- func_enter();
-
/*
* The device revision from the TPLMID_MANF and TPLMID_CARD fields
* of the CIS are available as
@@ -635,7 +600,6 @@
if (r != CSR_RESULT_SUCCESS)
{
unifi_error(card->ospriv, "Firmware hasn't started\n");
- func_exit_r(r);
return r;
}
unifi_trace(card->ospriv, UDBG4, "SLUT addr 0x%lX\n", slut_address);
@@ -652,7 +616,6 @@
if (csrResult != CSR_RESULT_SUCCESS)
{
r = ConvertCsrSdioToCsrHipResult(card, csrResult);
- func_exit_r(r);
return r;
}
card->sdio_clock_speed = UNIFI_SDIO_CLOCK_INIT_HZ;
@@ -671,14 +634,12 @@
if (r != CSR_RESULT_SUCCESS)
{
unifi_error(card->ospriv, "Failed to read SLUT finger print\n");
- func_exit_r(r);
return r;
}
if (finger_print != SLUT_FINGERPRINT)
{
unifi_error(card->ospriv, "Failed to find Symbol lookup table fingerprint\n");
- func_exit_r(CSR_RESULT_FAILURE);
return CSR_RESULT_FAILURE;
}
@@ -696,7 +657,6 @@
r = unifi_card_read16(card, slut_address, &s);
if (r != CSR_RESULT_SUCCESS)
{
- func_exit_r(r);
return r;
}
slut_address += 2;
@@ -710,7 +670,6 @@
r = unifi_read32(card, slut_address, &l);
if (r != CSR_RESULT_SUCCESS)
{
- func_exit_r(r);
return r;
}
slut_address += 4;
@@ -739,7 +698,6 @@
if (r != CSR_RESULT_SUCCESS)
{
unifi_error(card->ospriv, "Failed to read config data\n");
- func_exit_r(r);
return r;
}
/* .. and then we copy the data to the host structure */
@@ -753,7 +711,6 @@
{
unifi_error(card->ospriv, "From host data slots %d\n", cfg_data->num_fromhost_data_slots);
unifi_error(card->ospriv, "need to be (queues * x + 2) (UNIFI_RESERVED_COMMAND_SLOTS for commands)\n");
- func_exit_r(CSR_RESULT_FAILURE);
return CSR_RESULT_FAILURE;
}
@@ -781,7 +738,6 @@
if ((card->sdio_io_block_size % cfg_data->sig_frag_size) != 0)
{
unifi_error(card->ospriv, "Configuration error: Can not pad to-host signals.\n");
- func_exit_r(CSR_WIFI_HIP_RESULT_INVALID_VALUE);
return CSR_WIFI_HIP_RESULT_INVALID_VALUE;
}
cfg_data->tohost_signal_padding = (u16) (card->sdio_io_block_size / cfg_data->sig_frag_size);
@@ -795,7 +751,6 @@
if (r != CSR_RESULT_SUCCESS)
{
unifi_error(card->ospriv, "Failed to write To-Host Signal Padding Fragments\n");
- func_exit_r(r);
return r;
}
}
@@ -818,7 +773,6 @@
if (r != CSR_RESULT_SUCCESS)
{
unifi_error(card->ospriv, "Failed to read build id\n");
- func_exit_r(r);
return r;
}
card->build_id = n;
@@ -835,7 +789,6 @@
if (r != CSR_RESULT_SUCCESS)
{
unifi_error(card->ospriv, "Failed to read build string\n");
- func_exit_r(r);
return r;
}
break;
@@ -853,7 +806,6 @@
if (r != CSR_RESULT_SUCCESS)
{
unifi_error(card->ospriv, "Failed to write loader load image command\n");
- func_exit_r(r);
return r;
}
@@ -871,7 +823,6 @@
if (r != CSR_RESULT_SUCCESS)
{
unifi_error(card->ospriv, "Failed to patch firmware\n");
- func_exit_r(r);
return r;
}
}
@@ -882,7 +833,6 @@
if (r != CSR_RESULT_SUCCESS)
{
unifi_error(card->ospriv, "Failed to write loader restart command\n");
- func_exit_r(r);
return r;
}
@@ -913,7 +863,6 @@
if (cfg_data == NULL)
{
unifi_error(card->ospriv, "Failed to find SDIO_SLOT_CONFIG Symbol\n");
- func_exit_r(CSR_RESULT_FAILURE);
return CSR_RESULT_FAILURE;
}
@@ -930,12 +879,10 @@
{
unifi_error(card->ospriv, "Failed to read init flag at %08lx\n",
card->init_flag_addr);
- func_exit_r(r);
return r;
}
if (initialised != 0)
{
- func_exit_r(CSR_RESULT_FAILURE);
return CSR_RESULT_FAILURE;
}
@@ -957,7 +904,6 @@
unifi_error(card->ospriv, "UniFi f/w protocol major version (%d) is different from driver (v%d.%d)\n",
major, UNIFI_HIP_MAJOR_VERSION, UNIFI_HIP_MINOR_VERSION);
#ifndef CSR_WIFI_DISABLE_HIP_VERSION_CHECK
- func_exit_r(CSR_RESULT_FAILURE);
return CSR_RESULT_FAILURE;
#endif
}
@@ -967,7 +913,6 @@
major, minor,
UNIFI_HIP_MAJOR_VERSION, UNIFI_HIP_MINOR_VERSION);
#ifndef CSR_WIFI_DISABLE_HIP_VERSION_CHECK
- func_exit_r(CSR_RESULT_FAILURE);
return CSR_RESULT_FAILURE;
#endif
}
@@ -978,7 +923,6 @@
*/
unifi_read_panic(card);
- func_exit();
return CSR_RESULT_SUCCESS;
} /* card_hw_init() */
@@ -1004,8 +948,6 @@
u8 io_enable;
CsrResult csrResult;
- func_enter();
-
r = CSR_RESULT_SUCCESS;
for (i = 0; i < MAILBOX2_ATTEMPTS; i++)
{
@@ -1107,7 +1049,6 @@
r = CSR_RESULT_FAILURE;
}
- func_exit();
return r;
} /* card_wait_for_unifi_to_reset() */
@@ -1136,14 +1077,11 @@
u8 io_enable;
CsrResult csrResult;
- func_enter();
-
if (card->chip_id <= SDIO_CARD_ID_UNIFI_2)
{
unifi_error(card->ospriv,
"Function reset method not supported for chip_id=%d\n",
card->chip_id);
- func_exit();
return CSR_RESULT_FAILURE;
}
@@ -1210,7 +1148,6 @@
r = CSR_RESULT_FAILURE;
}
- func_exit();
return r;
} /* card_wait_for_unifi_to_reset() */
@@ -1238,8 +1175,6 @@
u16 mbox0, mbox1;
CsrResult r;
- func_enter();
-
/*
* Wait for UniFi to initialise its data structures by polling
* the SHARED_MAILBOX1 register.
@@ -1277,7 +1212,6 @@
if (r != CSR_RESULT_SUCCESS)
{
unifi_error(card->ospriv, "Failed to read UniFi Mailbox1 register for second time\n");
- func_exit_r(r);
return r;
}
unifi_trace(card->ospriv, UDBG1, "MAILBOX1 value=0x%04X\n", mbox1);
@@ -1296,7 +1230,6 @@
{
unifi_trace(card->ospriv, UDBG1, "Timeout waiting for firmware to start, Mailbox1 still 0 after %d ms\n",
MAILBOX1_ATTEMPTS * MAILBOX1_TIMEOUT);
- func_exit_r(CSR_RESULT_FAILURE);
return CSR_RESULT_FAILURE;
}
@@ -1312,7 +1245,6 @@
if (r != CSR_RESULT_SUCCESS)
{
unifi_error(card->ospriv, "Failed to write f/w startup handshake to MAILBOX2\n");
- func_exit_r(r);
return r;
}
@@ -1330,13 +1262,11 @@
if (r != CSR_RESULT_SUCCESS)
{
unifi_error(card->ospriv, "Failed to read UniFi Mailbox0 register\n");
- func_exit_r(r);
return r;
}
*paddr = (((u32)mbox1 << 16) | mbox0);
- func_exit();
return CSR_RESULT_SUCCESS;
} /* card_wait_for_firmware_to_start() */
@@ -1358,14 +1288,12 @@
*/
CsrResult unifi_capture_panic(card_t *card)
{
- func_enter();
/* The firmware must have previously initialised to read the panic addresses
* from the SLUT
*/
if (!card->panic_data_phy_addr || !card->panic_data_mac_addr)
{
- func_exit();
return CSR_RESULT_SUCCESS;
}
@@ -1380,7 +1308,6 @@
unifi_info(card->ospriv, "Unable to read panic codes");
}
- func_exit();
return CSR_RESULT_SUCCESS;
}
@@ -1405,8 +1332,6 @@
s32 i;
CsrResult r, sr;
- func_enter();
-
/* A chip version of zero means that the version never got succesfully read
* during reset. In this case give up because it will not be possible to
* verify the chip version.
@@ -1513,7 +1438,6 @@
}
r = ConvertCsrSdioToCsrHipResult(card, sr);
- func_exit_r(r);
return r;
}
@@ -1536,8 +1460,6 @@
CsrResult r;
u16 p_code, p_arg;
- func_enter();
-
/* The firmware must have previously initialised to read the panic addresses
* from the SLUT
*/
@@ -1584,7 +1506,6 @@
card->last_mac_panic_arg = p_arg;
}
- func_exit();
}
@@ -1607,8 +1528,6 @@
s16 n, i, k, r;
sdio_config_data_t *cfg_data;
- func_enter();
-
/* Reset any state carried forward from a previous life */
card->fh_command_queue.q_rd_ptr = 0;
card->fh_command_queue.q_wr_ptr = 0;
@@ -1634,7 +1553,6 @@
if (card->fh_buffer.buf == NULL)
{
unifi_error(card->ospriv, "Failed to allocate memory for F-H signals\n");
- func_exit_r(CSR_WIFI_HIP_RESULT_NO_MEMORY);
return CSR_WIFI_HIP_RESULT_NO_MEMORY;
}
card->fh_buffer.bufsize = UNIFI_FH_BUF_SIZE;
@@ -1645,7 +1563,6 @@
if (card->th_buffer.buf == NULL)
{
unifi_error(card->ospriv, "Failed to allocate memory for T-H signals\n");
- func_exit_r(CSR_WIFI_HIP_RESULT_NO_MEMORY);
return CSR_WIFI_HIP_RESULT_NO_MEMORY;
}
card->th_buffer.bufsize = UNIFI_FH_BUF_SIZE;
@@ -1667,7 +1584,6 @@
if (card->from_host_data == NULL)
{
unifi_error(card->ospriv, "Failed to allocate memory for F-H bulk data array\n");
- func_exit_r(CSR_WIFI_HIP_RESULT_NO_MEMORY);
return CSR_WIFI_HIP_RESULT_NO_MEMORY;
}
@@ -1683,7 +1599,6 @@
if (card->fh_slot_host_tag_record == NULL)
{
unifi_error(card->ospriv, "Failed to allocate memory for F-H slot host tag mapping array\n");
- func_exit_r(CSR_WIFI_HIP_RESULT_NO_MEMORY);
return CSR_WIFI_HIP_RESULT_NO_MEMORY;
}
@@ -1702,7 +1617,6 @@
if (card->to_host_data == NULL)
{
unifi_error(card->ospriv, "Failed to allocate memory for T-H bulk data array\n");
- func_exit_r(CSR_WIFI_HIP_RESULT_NO_MEMORY);
return CSR_WIFI_HIP_RESULT_NO_MEMORY;
}
@@ -1736,7 +1650,6 @@
card->memory_resources_allocated = 1;
- func_exit();
return CSR_RESULT_SUCCESS;
} /* card_allocate_memory_resources() */
@@ -1781,7 +1694,6 @@
*/
static void card_free_memory_resources(card_t *card)
{
- func_enter();
unifi_trace(card->ospriv, UDBG1, "Freeing card memory resources.\n");
@@ -1812,7 +1724,6 @@
card->memory_resources_allocated = 0;
- func_exit();
} /* card_free_memory_resources() */
@@ -1820,8 +1731,6 @@
{
s16 i;
- func_enter();
-
unifi_trace(card->ospriv, UDBG1, "Initialising internal signal queues.\n");
/* Reset any state carried forward from a previous life */
card->fh_command_queue.q_rd_ptr = 0;
@@ -1838,7 +1747,6 @@
#ifndef CSR_WIFI_HIP_TA_DISABLE
unifi_ta_sampling_init(card);
#endif
- func_exit();
}
@@ -1858,7 +1766,6 @@
void unifi_cancel_pending_signals(card_t *card)
{
s16 i, n, r;
- func_enter();
unifi_trace(card->ospriv, UDBG1, "Canceling pending signals.\n");
@@ -1927,7 +1834,6 @@
card_init_soft_queues(card);
- func_exit();
} /* unifi_cancel_pending_signals() */
@@ -1951,7 +1857,6 @@
*/
void unifi_free_card(card_t *card)
{
- func_enter();
#ifdef CSR_PRE_ALLOC_NET_DATA
prealloc_netdata_free(card);
#endif
@@ -1967,7 +1872,6 @@
kfree(card);
- func_exit();
} /* unifi_free_card() */
@@ -1989,8 +1893,6 @@
CsrResult r;
u8 i;
- func_enter();
-
/* Allocate the buffers we need, only once. */
if (card->memory_resources_allocated == 1)
{
@@ -2007,14 +1909,12 @@
{
unifi_error(card->ospriv, "Failed to allocate card memory resources.\n");
card_free_memory_resources(card);
- func_exit_r(r);
return r;
}
if (card->sdio_ctrl_addr == 0)
{
unifi_error(card->ospriv, "Failed to find config struct!\n");
- func_exit_r(CSR_WIFI_HIP_RESULT_INVALID_VALUE);
return CSR_WIFI_HIP_RESULT_INVALID_VALUE;
}
@@ -2037,7 +1937,6 @@
if (r != CSR_RESULT_SUCCESS)
{
unifi_error(card->ospriv, "Failed to read from-host sig written count\n");
- func_exit_r(r);
return r;
}
card->from_host_signals_w = (s16)s;
@@ -2051,7 +1950,6 @@
if (r != CSR_RESULT_SUCCESS)
{
unifi_error(card->ospriv, "Failed to read to-host sig read count\n");
- func_exit_r(r);
return r;
}
card->to_host_signals_r = (s16)s;
@@ -2066,7 +1964,6 @@
if (r != CSR_RESULT_SUCCESS)
{
unifi_error(card->ospriv, "Failed to write initialised flag\n");
- func_exit_r(r);
return r;
}
@@ -2082,7 +1979,6 @@
card->dynamic_slot_data.packets_interval = UNIFI_PACKETS_INTERVAL;
- func_exit();
return CSR_RESULT_SUCCESS;
} /* card_init_slots() */
@@ -2153,8 +2049,6 @@
{
u8 i;
- func_enter();
-
unifi_trace(card->ospriv, UDBG5, "Packets Txed %d %d %d %d\n",
card->dynamic_slot_data.packets_txed[0],
card->dynamic_slot_data.packets_txed[1],
@@ -2176,7 +2070,6 @@
}
card->dynamic_slot_data.total_packets_txed = 0;
- func_exit();
}
@@ -2206,8 +2099,6 @@
q_t *sigq;
u16 num_data_slots = card->config_data.num_fromhost_data_slots - UNIFI_RESERVED_COMMAND_SLOTS;
- func_enter();
-
/* Calculate the pending queue length */
sigq = &card->fh_traffic_queue[queue];
q_len = CSR_WIFI_HIP_Q_SLOTS_USED(sigq);
@@ -2215,7 +2106,6 @@
if (q_len <= card->dynamic_slot_data.from_host_reserved_slots[queue])
{
unifi_trace(card->ospriv, UDBG5, "queue %d q_len %d already has that many reserved slots, exiting\n", queue, q_len);
- func_exit();
return;
}
@@ -2313,7 +2203,6 @@
card->dynamic_slot_data.from_host_max_slots[i]);
}
- func_exit();
}
@@ -2336,14 +2225,11 @@
u8 queue = card->from_host_data[slot].queue;
const void *os_data_ptr = card->from_host_data[slot].bd.os_data_ptr;
- func_enter();
-
if (card->from_host_data[slot].bd.data_length == 0)
{
unifi_warning(card->ospriv,
"Surprise: request to clear an already free FH data slot: %d\n",
slot);
- func_exit();
return;
}
@@ -2379,7 +2265,6 @@
unifi_trace(card->ospriv, UDBG4, "CardClearFromHostDataSlot: slot %d recycled %p\n", slot, os_data_ptr);
- func_exit();
} /* CardClearFromHostDataSlot() */
@@ -2457,8 +2342,6 @@
{
u16 i, n = 0;
- func_enter();
-
/* First two slots reserved for MLME */
for (i = 0; i < card->config_data.num_fromhost_data_slots; i++)
{
@@ -2469,7 +2352,6 @@
}
}
- func_exit();
return n;
} /* CardGetFreeFromHostDataSlots() */
@@ -2506,7 +2388,6 @@
static CsrResult unifi_identify_hw(card_t *card)
{
- func_enter();
card->chip_id = card->sdio_if->sdioId.cardId;
card->function = card->sdio_if->sdioId.sdioFunction;
@@ -2530,7 +2411,6 @@
ChipHelper_MarketingName(card->helper),
ChipHelper_FriendlyName(card->helper));
- func_exit();
return CSR_RESULT_SUCCESS;
} /* unifi_identify_hw() */
@@ -2541,8 +2421,6 @@
CsrResult csrResult;
enum unifi_host_state old_state = card->host_state;
- func_enter();
-
r = unifi_identify_hw(card);
if (r == CSR_WIFI_HIP_RESULT_NO_DEVICE)
{
@@ -2551,7 +2429,6 @@
if (r != CSR_RESULT_SUCCESS)
{
unifi_error(card->ospriv, "Failed to identify hw\n");
- func_exit_r(r);
return r;
}
@@ -2576,7 +2453,6 @@
if (csrResult != CSR_RESULT_SUCCESS)
{
r = ConvertCsrSdioToCsrHipResult(card, csrResult);
- func_exit_r(r);
return r;
}
card->sdio_clock_speed = UNIFI_SDIO_CLOCK_INIT_HZ;
@@ -2596,7 +2472,6 @@
r = ConvertCsrSdioToCsrHipResult(card, csrResult);
/* Can't enable WLAN function. Try resetting the SDIO block. */
unifi_error(card->ospriv, "Failed to re-enable function %d.\n", card->function);
- func_exit_r(r);
return r;
}
@@ -2610,11 +2485,9 @@
r = unifi_read_chip_version(card);
if (r != CSR_RESULT_SUCCESS)
{
- func_exit_r(r);
return r;
}
- func_exit();
return CSR_RESULT_SUCCESS;
} /* unifi_prepare_hw() */
@@ -2625,8 +2498,6 @@
CsrResult r;
u16 ver;
- func_enter();
-
gbl_chip_version = ChipHelper_GBL_CHIP_VERSION(card->helper);
/* Try to read the chip version from register. */
@@ -2640,7 +2511,6 @@
if (r != CSR_RESULT_SUCCESS)
{
unifi_error(card->ospriv, "Failed to read GBL_CHIP_VERSION\n");
- func_exit_r(r);
return r;
}
card->chip_version = ver;
@@ -2653,7 +2523,6 @@
unifi_info(card->ospriv, "Chip Version 0x%04X\n", card->chip_version);
- func_exit_r(r);
return r;
} /* unifi_read_chip_version() */
@@ -2684,8 +2553,6 @@
u16 new_block_size = UNIFI_IO_BLOCK_SIZE;
CsrResult csrResult;
- func_enter();
-
/* Errors returned by unifi_prepare_hw() are not critical at this point */
r = unifi_prepare_hw(card);
if (r == CSR_WIFI_HIP_RESULT_NO_DEVICE)
@@ -2709,7 +2576,6 @@
if (r != CSR_RESULT_SUCCESS)
{
unifi_error(card->ospriv, "unifi_prepare_hw failed after hard reset\n");
- func_exit_r(r);
return r;
}
}
@@ -2729,7 +2595,6 @@
if (r != CSR_RESULT_SUCCESS)
{
unifi_error(card->ospriv, "software hard reset failed\n");
- func_exit_r(r);
return r;
}
@@ -2742,7 +2607,6 @@
r = unifi_read_chip_version(card);
if (r != CSR_RESULT_SUCCESS)
{
- func_exit_r(r);
return r;
}
}
@@ -2792,7 +2656,6 @@
}
- func_exit_r(r);
return r;
} /* unifi_reset_hardware() */
@@ -2818,8 +2681,6 @@
CsrResult r;
CsrResult csrResult;
- func_enter();
-
/*
* This resets only function 1, so should be used in
* preference to the method below (CSR_FUNC_EN)
@@ -2869,7 +2730,6 @@
if (r != CSR_RESULT_SUCCESS)
{
unifi_warning(card->ospriv, "SDIO error writing SDIO_CSR_FUNC_EN: %d\n", r);
- func_exit_r(r);
return r;
}
else
@@ -2890,7 +2750,6 @@
unifi_warning(card->ospriv, "card_reset_method_io_enable failed to reset UniFi\n");
}
- func_exit();
return r;
} /* card_reset_method_io_enable() */
@@ -2915,8 +2774,6 @@
{
CsrResult r;
- func_enter();
-
/*
* Prepare UniFi for h/w reset
*/
@@ -2930,7 +2787,6 @@
if (r != CSR_RESULT_SUCCESS)
{
unifi_error(card->ospriv, "Failed to set UNIFI_HOST_STATE_DROWSY\n");
- func_exit_r(r);
return r;
}
CsrThreadSleep(5);
@@ -2944,7 +2800,6 @@
if (r != CSR_RESULT_SUCCESS)
{
unifi_error(card->ospriv, "Can't stop processors\n");
- func_exit();
return r;
}
@@ -2963,7 +2818,6 @@
if (r != CSR_RESULT_SUCCESS)
{
unifi_warning(card->ospriv, "SDIO error writing DBG_RESET: %d\n", r);
- func_exit_r(r);
return r;
}
@@ -2980,7 +2834,6 @@
unifi_warning(card->ospriv, "card_reset_method_dbg_reset failed to reset UniFi\n");
}
- func_exit();
return r;
} /* card_reset_method_dbg_reset() */
@@ -3008,8 +2861,6 @@
const struct chip_helper_reset_values *init_data;
u32 chunks;
- func_enter();
-
/* Clear cache of page registers */
card->proc_select = (u32)(-1);
card->dmem_page = (u32)(-1);
@@ -3028,7 +2879,6 @@
if (r != CSR_RESULT_SUCCESS)
{
unifi_error(card->ospriv, "unifi_card_hard_reset failed to identify h/w\n");
- func_exit();
return r;
}
@@ -3039,7 +2889,6 @@
unifi_error(card->ospriv,
"Hard reset (Code download) is unsupported\n");
- func_exit_r(CSR_RESULT_FAILURE);
return CSR_RESULT_FAILURE;
}
@@ -3058,7 +2907,6 @@
}
if (r == CSR_RESULT_SUCCESS)
{
- func_exit();
return r;
}
}
@@ -3066,7 +2914,6 @@
/* Software hard reset */
r = card_reset_method_dbg_reset(card);
- func_exit_r(r);
return r;
} /* unifi_card_hard_reset() */
@@ -3097,8 +2944,6 @@
{
CsrResult r;
- func_enter();
-
if (card->chip_id > SDIO_CARD_ID_UNIFI_2)
{
r = sdio_write_f0(card, SDIO_CSR_FROM_HOST_SCRATCH0,
@@ -3117,13 +2962,11 @@
if (r != CSR_RESULT_SUCCESS)
{
unifi_error(card->ospriv, "SDIO error writing UNIFI_SHARED_IO_INTERRUPT: %d\n", r);
- func_exit_r(r);
return r;
}
card->unifi_interrupt_seq++;
- func_exit();
return CSR_RESULT_SUCCESS;
} /* CardGenInt() */
@@ -3388,8 +3231,6 @@
bulk_data_desc_t *bulkdata = csptr->bulkdata;
s16 h, nslots;
- func_enter();
-
/* Count the number of slots required */
for (i = 0; i < UNIFI_MAX_DATA_REFERENCES; i++)
{
@@ -3470,7 +3311,6 @@
{
unifi_trace(card->ospriv, UDBG5, "fh data slot %d: %d\n", i, card->from_host_data[i].bd.data_length);
}
- func_exit();
return CSR_RESULT_FAILURE;
}
}
@@ -3523,8 +3363,6 @@
}
}
- func_exit();
-
return CSR_RESULT_SUCCESS;
} /* CardWriteBulkData() */
diff --git a/drivers/staging/csr/csr_wifi_hip_card_sdio.h b/drivers/staging/csr/csr_wifi_hip_card_sdio.h
index dc2ed70..a9b9ec4 100644
--- a/drivers/staging/csr/csr_wifi_hip_card_sdio.h
+++ b/drivers/staging/csr/csr_wifi_hip_card_sdio.h
@@ -20,10 +20,6 @@
#ifndef __CARD_SDIO_H__
#define __CARD_SDIO_H__
-#ifdef __cplusplus
-extern "C" {
-#endif
-
#include "csr_wifi_hip_unifi.h"
#include "csr_wifi_hip_unifi_udi.h"
#include "csr_wifi_hip_unifihw.h"
@@ -695,8 +691,4 @@
void dump(void *mem, u16 len);
void dump16(void *mem, u16 len);
-#ifdef __cplusplus
-}
-#endif
-
#endif /* __CARD_SDIO_H__ */
diff --git a/drivers/staging/csr/csr_wifi_hip_chiphelper.h b/drivers/staging/csr/csr_wifi_hip_chiphelper.h
index 24737ae..b6b67ee 100644
--- a/drivers/staging/csr/csr_wifi_hip_chiphelper.h
+++ b/drivers/staging/csr/csr_wifi_hip_chiphelper.h
@@ -14,10 +14,6 @@
#include <linux/types.h>
-#ifdef __cplusplus
-extern "C" {
-#endif
-
/* The age of the BlueCore chip. This is probably not useful, if
you know the age then you can probably work out the version directly. */
enum chip_helper_bluecore_age
@@ -408,64 +404,4 @@
u32 offset,
u16 *page, u16 *addr, u32 *len);
-#ifdef __cplusplus
-/* Close the extern "C" */
-}
-
-/*
- * This is the C++ API.
- */
-
-class ChipHelper
-{
-public:
- /* If this constructor is used then a GetVersionXXX function
- should be called next. */
- ChipHelper();
-
- /* copy constructor */
- ChipHelper(ChipDescript * desc);
-
- /* The default constructor assume a BC7 / UF105x series chip
- and that the number given is the value of UNIFI_GBL_CHIP_VERSION
- (0xFE81) */
- ChipHelper(u16 version);
-
- /* This returns the C interface magic token from a C++ instance. */
- ChipDescript* GetDescript() const
- {
- return m_desc;
- }
-
-
- /* Clear out theis class (set it to the null token). */
- void ClearVersion();
-
- /* Load this class with data for a specific chip. */
- void GetVersionAny(u16 from_FF9A, u16 from_FE81);
- void GetVersionUniFi(u16 version);
- void GetVersionBlueCore(chip_helper_bluecore_age age, u16 version);
- void GetVersionSdio(u8 sdio_version);
-
- /* Helpers to build the definitions of the member functions. */
-#define CHIP_HELPER_DEF0_CPP_DEC(ret_type, name, info) \
- ret_type name() const;
-#define CHIP_HELPER_DEF1_CPP_DEC(ret_type, name, type1, name1) \
- ret_type name(type1 name1) const;
-
- CHIP_HELPER_LIST(CPP_DEC)
-
-
- /* The DecodeWindow function, see the description of the C version. */
- s32 DecodeWindow(chip_helper_window_index window,
- chip_helper_window_type type,
- u32 offset,
- u16 &page, u16 &addr, u32 &len) const;
-
-private:
- ChipDescript *m_desc;
-};
-
-#endif /* __cplusplus */
-
#endif
diff --git a/drivers/staging/csr/csr_wifi_hip_chiphelper_private.h b/drivers/staging/csr/csr_wifi_hip_chiphelper_private.h
index cb0ea4b..e5e5799 100644
--- a/drivers/staging/csr/csr_wifi_hip_chiphelper_private.h
+++ b/drivers/staging/csr/csr_wifi_hip_chiphelper_private.h
@@ -14,10 +14,6 @@
#include "csr_wifi_hip_chiphelper.h"
-#ifdef __cplusplus
-extern "C" {
-#endif /* __cplusplus */
-
/* This GP stuff should be somewhere else? */
/* Memory spaces encoded in top byte of Generic Pointer type */
@@ -201,8 +197,4 @@
const struct window_info_t *windows[CHIP_HELPER_WINDOW_COUNT];
};
-#ifdef __cplusplus
-}
-#endif /* __cplusplus */
-
#endif /* CSR_WIFI_HIP_CHIPHELPER_PRIVATE_H__ */
diff --git a/drivers/staging/csr/csr_wifi_hip_conversions.h b/drivers/staging/csr/csr_wifi_hip_conversions.h
index 7d045c0..bf7a52e 100644
--- a/drivers/staging/csr/csr_wifi_hip_conversions.h
+++ b/drivers/staging/csr/csr_wifi_hip_conversions.h
@@ -23,10 +23,6 @@
#ifndef __CSR_WIFI_HIP_CONVERSIONS_H__
#define __CSR_WIFI_HIP_CONVERSIONS_H__
-#ifdef __cplusplus
-extern "C" {
-#endif
-
#define SIZEOF_UINT16 2
#define SIZEOF_UINT32 4
#define SIZEOF_UINT64 8
@@ -73,9 +69,5 @@
CsrResult read_unpack_signal(const u8 *ptr, CSR_SIGNAL *sig);
CsrResult write_pack(const CSR_SIGNAL *sig, u8 *ptr, u16 *sig_len);
-#ifdef __cplusplus
-}
-#endif
-
#endif /* __CSR_WIFI_HIP_CONVERSIONS_H__ */
diff --git a/drivers/staging/csr/csr_wifi_hip_download.c b/drivers/staging/csr/csr_wifi_hip_download.c
index 6db672c..2f44a38 100644
--- a/drivers/staging/csr/csr_wifi_hip_download.c
+++ b/drivers/staging/csr/csr_wifi_hip_download.c
@@ -68,7 +68,6 @@
if (r != CSR_RESULT_SUCCESS)
{
unifi_error(card->ospriv, "Firmware hasn't started\n");
- func_exit_r(r);
return r;
}
*pslut = slut_address;
@@ -81,7 +80,6 @@
if (csrResult != CSR_RESULT_SUCCESS)
{
r = ConvertCsrSdioToCsrHipResult(card, csrResult);
- func_exit_r(r);
return r;
}
card->sdio_clock_speed = UNIFI_SDIO_CLOCK_INIT_HZ;
@@ -106,14 +104,12 @@
if (r != CSR_RESULT_SUCCESS)
{
unifi_error(card->ospriv, "Failed to read SLUT finger print\n");
- func_exit_r(r);
return r;
}
if (finger_print != SLUT_FINGERPRINT)
{
unifi_error(card->ospriv, "Failed to find SLUT fingerprint\n");
- func_exit_r(CSR_RESULT_FAILURE);
return CSR_RESULT_FAILURE;
}
@@ -128,7 +124,6 @@
r = unifi_card_read16(card, slut_address, &id);
if (r != CSR_RESULT_SUCCESS)
{
- func_exit_r(r);
return r;
}
slut_address += 2;
@@ -143,7 +138,6 @@
r = unifi_read32(card, slut_address, &obj);
if (r != CSR_RESULT_SUCCESS)
{
- func_exit_r(r);
return r;
}
slut_address += 4;
@@ -161,7 +155,6 @@
}
}
- func_exit_r(r);
return r;
}
@@ -279,7 +272,6 @@
if (r != CSR_RESULT_SUCCESS)
{
unifi_error(card->ospriv, "Converted patch download failed\n");
- func_exit_r(r);
return r;
}
else
@@ -294,7 +286,6 @@
unifi_error(card->ospriv, "Failed to write loader restart cmd\n");
}
- func_exit_r(r);
return r;
}
}
@@ -327,8 +318,6 @@
xbv1_t *fwinfo;
CsrResult r;
- func_enter();
-
fwinfo = kmalloc(sizeof(xbv1_t), GFP_KERNEL);
if (fwinfo == NULL)
{
@@ -376,7 +365,6 @@
}
kfree(fwinfo);
- func_exit_r(r);
return r;
} /* unifi_dl_firmware() */
@@ -407,15 +395,12 @@
xbv1_t *fwinfo;
CsrResult r;
- func_enter();
-
unifi_info(card->ospriv, "unifi_dl_patch %p %08x\n", dlpriv, boot_ctrl);
fwinfo = kmalloc(sizeof(xbv1_t), GFP_KERNEL);
if (fwinfo == NULL)
{
unifi_error(card->ospriv, "Failed to allocate memory for patches\n");
- func_exit();
return CSR_WIFI_HIP_RESULT_NO_MEMORY;
}
@@ -431,7 +416,6 @@
{
kfree(fwinfo);
unifi_error(card->ospriv, "Failed to read in patch file\n");
- func_exit();
return CSR_WIFI_HIP_RESULT_INVALID_VALUE;
}
@@ -446,7 +430,6 @@
card->build_id, fwinfo->build_id);
kfree(fwinfo);
#ifndef CSR_WIFI_IGNORE_PATCH_VERSION_MISMATCH
- func_exit();
return CSR_WIFI_HIP_RESULT_INVALID_VALUE;
#else
fwinfo = NULL;
@@ -463,7 +446,6 @@
kfree(fwinfo);
- func_exit_r(r);
return r;
} /* unifi_dl_patch() */
diff --git a/drivers/staging/csr/csr_wifi_hip_dump.c b/drivers/staging/csr/csr_wifi_hip_dump.c
index d67b460..7b7eec49 100644
--- a/drivers/staging/csr/csr_wifi_hip_dump.c
+++ b/drivers/staging/csr/csr_wifi_hip_dump.c
@@ -40,7 +40,7 @@
typedef struct coredump_buf
{
u16 count; /* serial number of dump */
- CsrTime timestamp; /* host's system time at capture */
+ u32 timestamp; /* host's system time at capture */
s16 requestor; /* request: 0=auto dump, 1=manual */
u16 chip_ver;
u32 fw_ver;
@@ -104,8 +104,6 @@
{
CsrResult r;
- func_enter();
-
if (enable)
{
unifi_trace(card->ospriv, UDBG2, "Mini-coredump requested after reset\n");
@@ -121,7 +119,6 @@
r = CSR_RESULT_SUCCESS;
}
- func_exit_r(r);
return r;
}
@@ -145,8 +142,6 @@
{
CsrResult r = CSR_RESULT_SUCCESS;
- func_enter();
-
if (card == NULL)
{
r = CSR_WIFI_HIP_RESULT_INVALID_VALUE;
@@ -160,7 +155,6 @@
}
}
- func_exit_r(r);
return r;
}
@@ -192,9 +186,7 @@
{
CsrResult r = CSR_RESULT_SUCCESS;
static u16 dump_seq_no = 1;
- CsrTime time_of_capture;
-
- func_enter();
+ u32 time_of_capture;
if (card->dump_next_write == NULL)
{
@@ -269,7 +261,6 @@
}
done:
- func_exit_r(r);
return r;
} /* unifi_coredump_capture() */
@@ -358,8 +349,6 @@
s32 i = 0;
coredump_buffer *find_dump = NULL;
- func_enter();
-
if (req == NULL || card == NULL)
{
r = CSR_WIFI_HIP_RESULT_INVALID_VALUE;
@@ -452,7 +441,6 @@
req->serial = find_dump->count;
done:
- func_exit_r(r);
return r;
} /* unifi_coredump_get_value() */
@@ -481,8 +469,6 @@
{
CsrResult r;
- func_enter();
-
if (zonebuf == NULL || def == NULL)
{
r = CSR_WIFI_HIP_RESULT_INVALID_VALUE;
@@ -521,7 +507,6 @@
}
done:
- func_exit_r(r);
return r;
}
@@ -551,8 +536,6 @@
CsrResult r = CSR_RESULT_SUCCESS;
s32 i;
- func_enter();
-
/* Walk the table of coredump zone definitions and read them from the chip */
for (i = 0;
(i < HIP_CDUMP_NUM_ZONES) && (r == 0);
@@ -561,7 +544,6 @@
r = unifi_coredump_read_zone(card, dump_buf->zone[i], &zonedef_table[i]);
}
- func_exit_r(r);
return r;
}
@@ -590,8 +572,6 @@
CsrResult r;
u32 sdio_addr;
- func_enter();
-
if (dump_buf == NULL)
{
r = CSR_WIFI_HIP_RESULT_INVALID_VALUE;
@@ -634,7 +614,6 @@
}
done:
- func_exit_r(r);
return r;
} /* unifi_coredump_from_sdio() */
@@ -743,8 +722,6 @@
u32 i = 0;
#endif
- func_enter();
-
card->request_coredump_on_reset = 0;
card->dump_next_write = NULL;
card->dump_cur_read = NULL;
@@ -790,7 +767,6 @@
done:
#endif
- func_exit();
return CSR_RESULT_SUCCESS;
#ifndef UNIFI_DISABLE_COREDUMP
@@ -798,7 +774,6 @@
/* Unwind what we allocated so far */
unifi_error(ospriv, "Out of memory allocating core dump node %d\n", i);
unifi_coredump_free(card);
- func_exit();
return CSR_WIFI_HIP_RESULT_NO_MEMORY;
#endif
} /* unifi_coreump_init() */
@@ -826,7 +801,6 @@
s16 i = 0;
s16 j;
- func_enter();
unifi_trace(ospriv, UDBG2, "Core dump de-configured\n");
if (card->dump_buf == NULL)
@@ -858,8 +832,6 @@
card->dump_buf = NULL;
card->dump_next_write = NULL;
card->dump_cur_read = NULL;
-
- func_exit();
} /* unifi_coredump_free() */
diff --git a/drivers/staging/csr/csr_wifi_hip_send.c b/drivers/staging/csr/csr_wifi_hip_send.c
index 86aa23c..76429e5 100644
--- a/drivers/staging/csr/csr_wifi_hip_send.c
+++ b/drivers/staging/csr/csr_wifi_hip_send.c
@@ -270,8 +270,6 @@
}
}
- func_exit();
-
return CSR_RESULT_SUCCESS;
} /* send_signal() */
diff --git a/drivers/staging/csr/csr_wifi_hip_signals.h b/drivers/staging/csr/csr_wifi_hip_signals.h
index 5f84155..ca4d077 100644
--- a/drivers/staging/csr/csr_wifi_hip_signals.h
+++ b/drivers/staging/csr/csr_wifi_hip_signals.h
@@ -1,10 +1,10 @@
/*****************************************************************************
- (c) Cambridge Silicon Radio Limited 2011
- All rights reserved and confidential information of CSR
+ (c) Cambridge Silicon Radio Limited 2011
+ All rights reserved and confidential information of CSR
- Refer to LICENSE.txt included with this source for details
- on the license terms.
+ Refer to LICENSE.txt included with this source for details
+ on the license terms.
*****************************************************************************/
@@ -101,10 +101,6 @@
/* FUNCTION DECLARATIONS */
/******************************************************************************/
-#ifdef __cplusplus
-extern "C" {
-#endif /* __cplusplus */
-
/******************************************************************************
* SigGetNumDataRefs - Retrieve pointers to data-refs from a signal.
*
@@ -129,9 +125,4 @@
*/
s32 SigGetSize(const CSR_SIGNAL *aSignal);
-#ifdef __cplusplus
-}
-#endif /* __cplusplus */
-
-
#endif /* __CSR_WIFI_HIP_SIGNALS_H__ */
diff --git a/drivers/staging/csr/csr_wifi_hip_sigs.h b/drivers/staging/csr/csr_wifi_hip_sigs.h
index 2b9f51d..6112cc3 100644
--- a/drivers/staging/csr/csr_wifi_hip_sigs.h
+++ b/drivers/staging/csr/csr_wifi_hip_sigs.h
@@ -16,10 +16,6 @@
#ifndef CSR_WIFI_HIP_SIGS_H
#define CSR_WIFI_HIP_SIGS_H
-#ifdef __cplusplus
-extern "C" {
-#endif
-
typedef s16 csr_place_holding_type;
typedef u16 CSR_ASSOCIATION_ID;
@@ -1418,8 +1414,4 @@
u32 SigGetFilterPos(u16 aSigID);
-#ifdef __cplusplus
-}
-#endif
-
#endif
diff --git a/drivers/staging/csr/csr_wifi_hip_ta_sampling.h b/drivers/staging/csr/csr_wifi_hip_ta_sampling.h
index 46c630b..aa684c6 100644
--- a/drivers/staging/csr/csr_wifi_hip_ta_sampling.h
+++ b/drivers/staging/csr/csr_wifi_hip_ta_sampling.h
@@ -21,10 +21,6 @@
#ifndef __TA_SAMPLING_H__
#define __TA_SAMPLING_H__
-#ifdef __cplusplus
-extern "C" {
-#endif
-
#include "csr_wifi_hip_unifi.h"
typedef struct ta_l4stats
@@ -67,9 +63,4 @@
void unifi_ta_sampling_init(card_t *card);
-
-#ifdef __cplusplus
-}
-#endif
-
#endif /* __TA_SAMPLING_H__ */
diff --git a/drivers/staging/csr/csr_wifi_hip_unifi.h b/drivers/staging/csr/csr_wifi_hip_unifi.h
index 2923e2ef..c2a2231 100644
--- a/drivers/staging/csr/csr_wifi_hip_unifi.h
+++ b/drivers/staging/csr/csr_wifi_hip_unifi.h
@@ -20,10 +20,6 @@
#ifndef __CSR_WIFI_HIP_UNIFI_H__
#define __CSR_WIFI_HIP_UNIFI_H__ 1
-#ifdef __cplusplus
-extern "C" {
-#endif
-
#ifndef CSR_WIFI_HIP_TA_DISABLE
#include "csr_wifi_router_ctrl_prim.h"
#include "csr_wifi_router_prim.h"
@@ -228,7 +224,7 @@
u32 chip_ver; /* Chip version */
u32 fw_ver; /* Firmware version */
s32 requestor; /* Requestor: 0=auto dump, 1=manual */
- CsrTime timestamp; /* time of capture by driver */
+ u32 timestamp; /* time of capture by driver */
u32 serial; /* capture serial number */
s32 value; /* register value */
} unifi_coredump_req_t; /* mini-coredumped reg value request */
@@ -872,8 +868,4 @@
CsrResult unifi_coredump_init(card_t *card, u16 num_dump_buffers);
void unifi_coredump_free(card_t *card);
-#ifdef __cplusplus
-}
-#endif
-
#endif /* __CSR_WIFI_HIP_UNIFI_H__ */
diff --git a/drivers/staging/csr/csr_wifi_hip_unifi_signal_names.c b/drivers/staging/csr/csr_wifi_hip_unifi_signal_names.c
index 7c13df2..9a35285 100644
--- a/drivers/staging/csr/csr_wifi_hip_unifi_signal_names.c
+++ b/drivers/staging/csr/csr_wifi_hip_unifi_signal_names.c
@@ -10,37 +10,32 @@
#include "csr_wifi_hip_unifi.h"
-struct sig_name
-{
- s16 id;
- const char *name;
+struct sig_name {
+ s16 id;
+ const char *name;
};
static const struct sig_name Unifi_bulkcmd_names[] = {
- { 0, "SignalCmd" },
- { 1, "CopyToHost" },
- { 2, "CopyToHostAck" },
- { 3, "CopyFromHost" },
- { 4, "CopyFromHostAck" },
- { 5, "ClearSlot" },
- { 6, "CopyOverlay" },
- { 7, "CopyOverlayAck" },
- { 8, "CopyFromHostAndClearSlot" },
- { 15, "Padding" }
+ { 0, "SignalCmd" },
+ { 1, "CopyToHost" },
+ { 2, "CopyToHostAck" },
+ { 3, "CopyFromHost" },
+ { 4, "CopyFromHostAck" },
+ { 5, "ClearSlot" },
+ { 6, "CopyOverlay" },
+ { 7, "CopyOverlayAck" },
+ { 8, "CopyFromHostAndClearSlot" },
+ { 15, "Padding" }
};
-const char* lookup_bulkcmd_name(u16 id)
+const char *lookup_bulkcmd_name(u16 id)
{
- if (id < 9)
- {
- return Unifi_bulkcmd_names[id].name;
- }
- if (id == 15)
- {
- return "Padding";
- }
+ if (id < 9)
+ return Unifi_bulkcmd_names[id].name;
+ if (id == 15)
+ return "Padding";
- return "UNKNOWN";
+ return "UNKNOWN";
}
diff --git a/drivers/staging/csr/csr_wifi_hip_unifi_udi.h b/drivers/staging/csr/csr_wifi_hip_unifi_udi.h
index 83032d0..9d85cfd 100644
--- a/drivers/staging/csr/csr_wifi_hip_unifi_udi.h
+++ b/drivers/staging/csr/csr_wifi_hip_unifi_udi.h
@@ -20,10 +20,6 @@
#ifndef __CSR_WIFI_HIP_UNIFI_UDI_H__
#define __CSR_WIFI_HIP_UNIFI_UDI_H__
-#ifdef __cplusplus
-extern "C" {
-#endif
-
#include "csr_wifi_hip_unifi.h"
#include "csr_wifi_hip_signals.h"
@@ -68,9 +64,4 @@
} \
} while (0)
-
-#ifdef __cplusplus
-}
-#endif
-
#endif /* __CSR_WIFI_HIP_UNIFI_UDI_H__ */
diff --git a/drivers/staging/csr/csr_wifi_hip_unifihw.h b/drivers/staging/csr/csr_wifi_hip_unifihw.h
index 5ffd6ba..3f9fcbd 100644
--- a/drivers/staging/csr/csr_wifi_hip_unifihw.h
+++ b/drivers/staging/csr/csr_wifi_hip_unifihw.h
@@ -20,10 +20,6 @@
#ifndef __UNIFIHW_H__
#define __UNIFIHW_H__ 1
-#ifdef __cplusplus
-extern "C" {
-#endif
-
/* Symbol Look Up Table fingerprint. IDs are in sigs.h */
#define SLUT_FINGERPRINT 0xD397
@@ -60,8 +56,4 @@
#define UNIFI_GP_OFFSET(GP) ((GP) & 0xFFFFFF)
#define UNIFI_GP_SPACE(GP) (((GP) >> 24) & 0xFF)
-#ifdef __cplusplus
-}
-#endif
-
#endif /* __UNIFIHW_H__ */
diff --git a/drivers/staging/csr/csr_wifi_hip_unifiversion.h b/drivers/staging/csr/csr_wifi_hip_unifiversion.h
index e1fdbb2..d1c6678 100644
--- a/drivers/staging/csr/csr_wifi_hip_unifiversion.h
+++ b/drivers/staging/csr/csr_wifi_hip_unifiversion.h
@@ -21,18 +21,10 @@
#ifndef __UNIFIVERSION_H__
#define __UNIFIVERSION_H__
-#ifdef __cplusplus
-extern "C" {
-#endif
-
/*
* The minimum version of Host Interface Protocol required by the driver.
*/
#define UNIFI_HIP_MAJOR_VERSION 9
#define UNIFI_HIP_MINOR_VERSION 1
-#ifdef __cplusplus
-}
-#endif
-
#endif /* __UNIFIVERSION_H__ */
diff --git a/drivers/staging/csr/csr_wifi_hip_xbv.c b/drivers/staging/csr/csr_wifi_hip_xbv.c
index 071f80a..050a15f 100644
--- a/drivers/staging/csr/csr_wifi_hip_xbv.c
+++ b/drivers/staging/csr/csr_wifi_hip_xbv.c
@@ -758,7 +758,7 @@
while (left)
{
/* Calculate amount to be transferred */
- sec_data_len = CSRMIN(left, PTDL_MAX_SIZE - PTDL_HDR_SIZE);
+ sec_data_len = min_t(u32, left, PTDL_MAX_SIZE - PTDL_HDR_SIZE);
sec_len = sec_data_len + PTDL_HDR_SIZE;
/* Write PTDL header + entire PTDL size */
diff --git a/drivers/staging/csr/csr_wifi_hip_xbv.h b/drivers/staging/csr/csr_wifi_hip_xbv.h
index 9b60a7e..3c50723 100644
--- a/drivers/staging/csr/csr_wifi_hip_xbv.h
+++ b/drivers/staging/csr/csr_wifi_hip_xbv.h
@@ -21,10 +21,6 @@
#ifndef __XBV_H__
#define __XBV_H__
-#ifdef __cplusplus
-extern "C" {
-#endif
-
#ifndef CSR_WIFI_XBV_TEST
/* Driver includes */
#include "csr_wifi_hip_unifi.h"
@@ -120,8 +116,4 @@
void* xbv_to_patch(card_t *card, fwreadfn_t readfn, const void *fw_buf, const xbv1_t *fwinfo,
u32 *size);
-#ifdef __cplusplus
-}
-#endif
-
#endif /* __XBV_H__ */
diff --git a/drivers/staging/csr/csr_wifi_hostio_prim.h b/drivers/staging/csr/csr_wifi_hostio_prim.h
index bf7c55c..cfb3e27 100644
--- a/drivers/staging/csr/csr_wifi_hostio_prim.h
+++ b/drivers/staging/csr/csr_wifi_hostio_prim.h
@@ -12,16 +12,7 @@
#ifndef CSR_WIFI_HOSTIO_H
#define CSR_WIFI_HOSTIO_H
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-
#define CSR_WIFI_HOSTIO_PRIM 0x0453
-#ifdef __cplusplus
-}
-#endif
-
#endif /* CSR_WIFI_HOSTIO_H */
diff --git a/drivers/staging/csr/csr_wifi_lib.h b/drivers/staging/csr/csr_wifi_lib.h
index eb56f62..5fde0ef 100644
--- a/drivers/staging/csr/csr_wifi_lib.h
+++ b/drivers/staging/csr/csr_wifi_lib.h
@@ -12,11 +12,6 @@
#include "csr_wifi_fsm_event.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
/*----------------------------------------------------------------------------*
* CsrWifiFsmEventInit
*
@@ -105,8 +100,4 @@
*----------------------------------------------------------------------------*/
CsrWifiEventCsrUint16CsrUint8* CsrWifiEventCsrUint16CsrUint8_struct(u16 primtype, u16 msgtype, CsrSchedQid dst, CsrSchedQid src, u16 value16, u8 value8);
-#ifdef __cplusplus
-}
-#endif
-
#endif /* CSR_WIFI_LIB_H__ */
diff --git a/drivers/staging/csr/csr_wifi_msgconv.h b/drivers/staging/csr/csr_wifi_msgconv.h
index 7ec35d7..f8b4029 100644
--- a/drivers/staging/csr/csr_wifi_msgconv.h
+++ b/drivers/staging/csr/csr_wifi_msgconv.h
@@ -14,11 +14,6 @@
#include "csr_prim_defs.h"
#include "csr_sched.h"
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-
void CsrUint16SerBigEndian(u8 *ptr, size_t *len, u16 v);
void CsrUint24SerBigEndian(u8 *ptr, size_t *len, u32 v);
void CsrUint32SerBigEndian(u8 *ptr, size_t *len, u32 v);
@@ -51,8 +46,4 @@
u8* CsrWifiEventCsrUint16CsrUint8Ser(u8 *ptr, size_t *len, void *msg);
void* CsrWifiEventCsrUint16CsrUint8Des(u8 *buffer, size_t length);
-#ifdef __cplusplus
-}
-#endif
-
#endif /* CSR_WIFI_MSGCONV_H__ */
diff --git a/drivers/staging/csr/csr_wifi_nme_ap_converter_init.h b/drivers/staging/csr/csr_wifi_nme_ap_converter_init.h
index 4072c06..b89d7c7 100644
--- a/drivers/staging/csr/csr_wifi_nme_ap_converter_init.h
+++ b/drivers/staging/csr/csr_wifi_nme_ap_converter_init.h
@@ -13,10 +13,6 @@
#ifndef CSR_WIFI_NME_AP_CONVERTER_INIT_H__
#define CSR_WIFI_NME_AP_CONVERTER_INIT_H__
-#ifdef __cplusplus
-extern "C" {
-#endif
-
#ifndef CSR_WIFI_NME_ENABLE
#error CSR_WIFI_NME_ENABLE MUST be defined inorder to use csr_wifi_nme_ap_converter_init.h
#endif
@@ -42,8 +38,4 @@
#endif /* EXCLUDE_CSR_WIFI_NME_AP_MODULE */
-#ifdef __cplusplus
-}
-#endif
-
#endif /* CSR_WIFI_NME_AP_CONVERTER_INIT_H__ */
diff --git a/drivers/staging/csr/csr_wifi_nme_ap_lib.h b/drivers/staging/csr/csr_wifi_nme_ap_lib.h
index d401470..6d8df83 100644
--- a/drivers/staging/csr/csr_wifi_nme_ap_lib.h
+++ b/drivers/staging/csr/csr_wifi_nme_ap_lib.h
@@ -22,11 +22,6 @@
#include "csr_wifi_nme_ap_prim.h"
#include "csr_wifi_nme_task.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
#ifndef CSR_WIFI_NME_ENABLE
#error CSR_WIFI_NME_ENABLE MUST be defined inorder to use csr_wifi_nme_ap_lib.h
#endif
@@ -58,24 +53,6 @@
*----------------------------------------------------------------------------*/
void CsrWifiNmeApFreeDownstreamMessageContents(u16 eventClass, void *message);
-/*----------------------------------------------------------------------------*
- * Enum to string functions
- *----------------------------------------------------------------------------*/
-const char* CsrWifiNmeApPersCredentialTypeToString(CsrWifiNmeApPersCredentialType value);
-
-
-/*----------------------------------------------------------------------------*
- * CsrPrim Type toString function.
- * Converts a message type to the String name of the Message
- *----------------------------------------------------------------------------*/
-const char* CsrWifiNmeApPrimTypeToString(CsrPrim msgType);
-
-/*----------------------------------------------------------------------------*
- * Lookup arrays for PrimType name Strings
- *----------------------------------------------------------------------------*/
-extern const char *CsrWifiNmeApUpstreamPrimNames[CSR_WIFI_NME_AP_PRIM_UPSTREAM_COUNT];
-extern const char *CsrWifiNmeApDownstreamPrimNames[CSR_WIFI_NME_AP_PRIM_DOWNSTREAM_COUNT];
-
/*******************************************************************************
NAME
@@ -515,9 +492,4 @@
#define CsrWifiNmeApWpsRegisterCfmSend(dst__, interfaceTag__, status__) \
CsrWifiNmeApWpsRegisterCfmSendTo(dst__, CSR_WIFI_NME_IFACEQUEUE, interfaceTag__, status__)
-
-#ifdef __cplusplus
-}
-#endif
-
#endif /* CSR_WIFI_NME_AP_LIB_H__ */
diff --git a/drivers/staging/csr/csr_wifi_nme_ap_prim.h b/drivers/staging/csr/csr_wifi_nme_ap_prim.h
index fc44560..b32bdbc 100644
--- a/drivers/staging/csr/csr_wifi_nme_ap_prim.h
+++ b/drivers/staging/csr/csr_wifi_nme_ap_prim.h
@@ -22,10 +22,6 @@
#include "csr_wifi_sme_ap_prim.h"
#include "csr_wifi_nme_prim.h"
-#ifdef __cplusplus
-extern "C" {
-#endif
-
#ifndef CSR_WIFI_NME_ENABLE
#error CSR_WIFI_NME_ENABLE MUST be defined inorder to use csr_wifi_nme_ap_prim.h
#endif
@@ -494,10 +490,5 @@
CsrWifiMacAddress peerDeviceAddress;
} CsrWifiNmeApStationInd;
-
-#ifdef __cplusplus
-}
-#endif
-
#endif /* CSR_WIFI_NME_AP_PRIM_H__ */
diff --git a/drivers/staging/csr/csr_wifi_nme_ap_sef.h b/drivers/staging/csr/csr_wifi_nme_ap_sef.h
index 3f35363..3daaa09 100644
--- a/drivers/staging/csr/csr_wifi_nme_ap_sef.h
+++ b/drivers/staging/csr/csr_wifi_nme_ap_sef.h
@@ -11,11 +11,6 @@
#include "csr_wifi_nme_prim.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
void CsrWifiNmeApUpstreamStateHandlers(void* drvpriv, CsrWifiFsmEvent* msg);
@@ -23,9 +18,4 @@
extern void CsrWifiNmeApStartCfmHandler(void* drvpriv, CsrWifiFsmEvent* msg);
extern void CsrWifiNmeApStopCfmHandler(void* drvpriv, CsrWifiFsmEvent* msg);
-
-#ifdef __cplusplus
-}
-#endif
-
#endif /* CSR_WIFI_ROUTER_SEF_CSR_WIFI_NME_H__ */
diff --git a/drivers/staging/csr/csr_wifi_nme_ap_serialize.h b/drivers/staging/csr/csr_wifi_nme_ap_serialize.h
index 0f57829..c04585e 100644
--- a/drivers/staging/csr/csr_wifi_nme_ap_serialize.h
+++ b/drivers/staging/csr/csr_wifi_nme_ap_serialize.h
@@ -17,10 +17,6 @@
#include "csr_wifi_nme_ap_prim.h"
-#ifdef __cplusplus
-extern "C" {
-#endif
-
#ifndef CSR_WIFI_NME_ENABLE
#error CSR_WIFI_NME_ENABLE MUST be defined inorder to use csr_wifi_nme_ap_serialize.h
#endif
@@ -95,9 +91,4 @@
extern size_t CsrWifiNmeApStationIndSizeof(void *msg);
#define CsrWifiNmeApStationIndSerFree CsrWifiNmeApPfree
-
-#ifdef __cplusplus
-}
-#endif
#endif /* CSR_WIFI_NME_AP_SERIALIZE_H__ */
-
diff --git a/drivers/staging/csr/csr_wifi_nme_converter_init.h b/drivers/staging/csr/csr_wifi_nme_converter_init.h
index 6661914..85e6f5f 100644
--- a/drivers/staging/csr/csr_wifi_nme_converter_init.h
+++ b/drivers/staging/csr/csr_wifi_nme_converter_init.h
@@ -13,10 +13,6 @@
#ifndef CSR_WIFI_NME_CONVERTER_INIT_H__
#define CSR_WIFI_NME_CONVERTER_INIT_H__
-#ifdef __cplusplus
-extern "C" {
-#endif
-
#ifndef CSR_WIFI_NME_ENABLE
#error CSR_WIFI_NME_ENABLE MUST be defined inorder to use csr_wifi_nme_converter_init.h
#endif
@@ -39,8 +35,4 @@
#endif /* EXCLUDE_CSR_WIFI_NME_MODULE */
-#ifdef __cplusplus
-}
-#endif
-
#endif /* CSR_WIFI_NME_CONVERTER_INIT_H__ */
diff --git a/drivers/staging/csr/csr_wifi_nme_lib.h b/drivers/staging/csr/csr_wifi_nme_lib.h
index 709ece4..5a1f132 100644
--- a/drivers/staging/csr/csr_wifi_nme_lib.h
+++ b/drivers/staging/csr/csr_wifi_nme_lib.h
@@ -23,68 +23,10 @@
#include "csr_wifi_nme_task.h"
-#ifdef __cplusplus
-extern "C" {
-#endif
-
#ifndef CSR_WIFI_NME_ENABLE
#error CSR_WIFI_NME_ENABLE MUST be defined inorder to use csr_wifi_nme_lib.h
#endif
-/*----------------------------------------------------------------------------*
- * CsrWifiNmeFreeUpstreamMessageContents
- *
- * DESCRIPTION
- * Free the allocated memory in a CSR_WIFI_NME upstream message. Does not
- * free the message itself, and can only be used for upstream messages.
- *
- * PARAMETERS
- * Deallocates the resources in a CSR_WIFI_NME upstream message
- *----------------------------------------------------------------------------*/
-void CsrWifiNmeFreeUpstreamMessageContents(u16 eventClass, void *message);
-
-/*----------------------------------------------------------------------------*
- * CsrWifiNmeFreeDownstreamMessageContents
- *
- * DESCRIPTION
- * Free the allocated memory in a CSR_WIFI_NME downstream message. Does not
- * free the message itself, and can only be used for downstream messages.
- *
- * PARAMETERS
- * Deallocates the resources in a CSR_WIFI_NME downstream message
- *----------------------------------------------------------------------------*/
-void CsrWifiNmeFreeDownstreamMessageContents(u16 eventClass, void *message);
-
-/*----------------------------------------------------------------------------*
- * Enum to string functions
- *----------------------------------------------------------------------------*/
-const char* CsrWifiNmeAuthModeToString(CsrWifiNmeAuthMode value);
-const char* CsrWifiNmeBssTypeToString(CsrWifiNmeBssType value);
-const char* CsrWifiNmeCcxOptionsMaskToString(CsrWifiNmeCcxOptionsMask value);
-const char* CsrWifiNmeConfigActionToString(CsrWifiNmeConfigAction value);
-const char* CsrWifiNmeConnectionStatusToString(CsrWifiNmeConnectionStatus value);
-const char* CsrWifiNmeCredentialTypeToString(CsrWifiNmeCredentialType value);
-const char* CsrWifiNmeEapMethodToString(CsrWifiNmeEapMethod value);
-const char* CsrWifiNmeEncryptionToString(CsrWifiNmeEncryption value);
-const char* CsrWifiNmeIndicationsToString(CsrWifiNmeIndications value);
-const char* CsrWifiNmeSecErrorToString(CsrWifiNmeSecError value);
-const char* CsrWifiNmeSimCardTypeToString(CsrWifiNmeSimCardType value);
-const char* CsrWifiNmeUmtsAuthResultToString(CsrWifiNmeUmtsAuthResult value);
-const char* CsrWifiNmeWmmQosInfoToString(CsrWifiNmeWmmQosInfo value);
-
-
-/*----------------------------------------------------------------------------*
- * CsrPrim Type toString function.
- * Converts a message type to the String name of the Message
- *----------------------------------------------------------------------------*/
-const char* CsrWifiNmePrimTypeToString(CsrPrim msgType);
-
-/*----------------------------------------------------------------------------*
- * Lookup arrays for PrimType name Strings
- *----------------------------------------------------------------------------*/
-extern const char *CsrWifiNmeUpstreamPrimNames[CSR_WIFI_NME_PRIM_UPSTREAM_COUNT];
-extern const char *CsrWifiNmeDownstreamPrimNames[CSR_WIFI_NME_PRIM_DOWNSTREAM_COUNT];
-
/*******************************************************************************
NAME
@@ -1046,9 +988,4 @@
#define CsrWifiNmeWpsReqSend(src__, interfaceTag__, pin__, ssid__, bssid__) \
CsrWifiNmeWpsReqSendTo(CSR_WIFI_NME_IFACEQUEUE, src__, interfaceTag__, pin__, ssid__, bssid__)
-
-#ifdef __cplusplus
-}
-#endif
-
#endif /* CSR_WIFI_NME_LIB_H__ */
diff --git a/drivers/staging/csr/csr_wifi_nme_prim.h b/drivers/staging/csr/csr_wifi_nme_prim.h
index 20dc779..9a7927a 100644
--- a/drivers/staging/csr/csr_wifi_nme_prim.h
+++ b/drivers/staging/csr/csr_wifi_nme_prim.h
@@ -21,10 +21,6 @@
#include "csr_wifi_fsm_event.h"
#include "csr_wifi_sme_prim.h"
-#ifdef __cplusplus
-extern "C" {
-#endif
-
#ifndef CSR_WIFI_NME_ENABLE
#error CSR_WIFI_NME_ENABLE MUST be defined inorder to use csr_wifi_nme_prim.h
#endif
@@ -1657,10 +1653,5 @@
CsrResult status;
} CsrWifiNmeEventMaskSetCfm;
-
-#ifdef __cplusplus
-}
-#endif
-
#endif /* CSR_WIFI_NME_PRIM_H__ */
diff --git a/drivers/staging/csr/csr_wifi_nme_serialize.h b/drivers/staging/csr/csr_wifi_nme_serialize.h
index c6b1636..ebac484 100644
--- a/drivers/staging/csr/csr_wifi_nme_serialize.h
+++ b/drivers/staging/csr/csr_wifi_nme_serialize.h
@@ -16,10 +16,6 @@
#include "csr_wifi_msgconv.h"
#include "csr_wifi_nme_prim.h"
-#ifdef __cplusplus
-extern "C" {
-#endif
-
#ifndef CSR_WIFI_NME_ENABLE
#error CSR_WIFI_NME_ENABLE MUST be defined inorder to use csr_wifi_nme_serialize.h
#endif
@@ -166,9 +162,5 @@
#define CsrWifiNmeEventMaskSetCfmSizeof CsrWifiEventCsrUint16Sizeof
#define CsrWifiNmeEventMaskSetCfmSerFree CsrWifiNmePfree
-
-#ifdef __cplusplus
-}
-#endif
#endif /* CSR_WIFI_NME_SERIALIZE_H__ */
diff --git a/drivers/staging/csr/csr_wifi_nme_task.h b/drivers/staging/csr/csr_wifi_nme_task.h
index 76f44db..84e973a 100644
--- a/drivers/staging/csr/csr_wifi_nme_task.h
+++ b/drivers/staging/csr/csr_wifi_nme_task.h
@@ -16,23 +16,12 @@
#include <linux/types.h>
#include "csr_sched.h"
-#ifdef __cplusplus
-extern "C" {
-#endif
-
#ifndef CSR_WIFI_NME_ENABLE
#error CSR_WIFI_NME_ENABLE MUST be defined inorder to use csr_wifi_nme_task.h
#endif
#define CSR_WIFI_NME_LOG_ID 0x1203FFFF
extern CsrSchedQid CSR_WIFI_NME_IFACEQUEUE;
-void CsrWifiNmeInit(void **gash);
-void CsrWifiNmeDeinit(void **gash);
-void CsrWifiNmeHandler(void **gash);
-
-#ifdef __cplusplus
-}
-#endif
#endif /* CSR_WIFI_NME_TASK_H__ */
diff --git a/drivers/staging/csr/csr_wifi_private_common.h b/drivers/staging/csr/csr_wifi_private_common.h
index 4730998..ee3bd51 100644
--- a/drivers/staging/csr/csr_wifi_private_common.h
+++ b/drivers/staging/csr/csr_wifi_private_common.h
@@ -11,10 +11,6 @@
#ifndef CSR_WIFI_PRIVATE_COMMON_H__
#define CSR_WIFI_PRIVATE_COMMON_H__
-#ifdef __cplusplus
-extern "C" {
-#endif
-
/**
* @brief maximum number of STAs allowed to be connected
*
@@ -81,9 +77,5 @@
#define CSR_WIFI_MODE_WPS_ENROLLEE ((CsrWifiInterfaceMode) 0x06)
#define CSR_WIFI_MODE_IBSS ((CsrWifiInterfaceMode) 0x07)
-#ifdef __cplusplus
-}
-#endif
-
#endif
diff --git a/drivers/staging/csr/csr_wifi_result.h b/drivers/staging/csr/csr_wifi_result.h
index 2f87cda..3c394c7 100644
--- a/drivers/staging/csr/csr_wifi_result.h
+++ b/drivers/staging/csr/csr_wifi_result.h
@@ -13,10 +13,6 @@
#include "csr_result.h"
-#ifdef __cplusplus
-extern "C" {
-#endif
-
/* THIS FILE SHOULD CONTAIN ONLY RESULT CODES */
/* Result Codes */
@@ -27,9 +23,5 @@
#define CSR_WIFI_HIP_RESULT_RANGE ((CsrResult) 5) /* Request exceeds the range of a file or a buffer */
#define CSR_WIFI_HIP_RESULT_NOT_FOUND ((CsrResult) 6) /* A file (typically a f/w patch) is not found */
-#ifdef __cplusplus
-}
-#endif
-
#endif /* CSR_WIFI_RESULT_H__ */
diff --git a/drivers/staging/csr/csr_wifi_router_converter_init.h b/drivers/staging/csr/csr_wifi_router_converter_init.h
index 2a293e4..478327b7 100644
--- a/drivers/staging/csr/csr_wifi_router_converter_init.h
+++ b/drivers/staging/csr/csr_wifi_router_converter_init.h
@@ -13,10 +13,6 @@
#ifndef CSR_WIFI_ROUTER_CONVERTER_INIT_H__
#define CSR_WIFI_ROUTER_CONVERTER_INIT_H__
-#ifdef __cplusplus
-extern "C" {
-#endif
-
#ifndef EXCLUDE_CSR_WIFI_ROUTER_MODULE
#include "csr_msgconv.h"
@@ -35,8 +31,4 @@
#endif /* EXCLUDE_CSR_WIFI_ROUTER_MODULE */
-#ifdef __cplusplus
-}
-#endif
-
#endif /* CSR_WIFI_ROUTER_CONVERTER_INIT_H__ */
diff --git a/drivers/staging/csr/csr_wifi_router_ctrl_converter_init.h b/drivers/staging/csr/csr_wifi_router_ctrl_converter_init.h
index 0c9d26b..c984589 100644
--- a/drivers/staging/csr/csr_wifi_router_ctrl_converter_init.h
+++ b/drivers/staging/csr/csr_wifi_router_ctrl_converter_init.h
@@ -13,10 +13,6 @@
#ifndef CSR_WIFI_ROUTER_CTRL_CONVERTER_INIT_H__
#define CSR_WIFI_ROUTER_CTRL_CONVERTER_INIT_H__
-#ifdef __cplusplus
-extern "C" {
-#endif
-
#ifndef EXCLUDE_CSR_WIFI_ROUTER_CTRL_MODULE
#include "csr_msgconv.h"
@@ -35,8 +31,4 @@
#endif /* EXCLUDE_CSR_WIFI_ROUTER_CTRL_MODULE */
-#ifdef __cplusplus
-}
-#endif
-
#endif /* CSR_WIFI_ROUTER_CTRL_CONVERTER_INIT_H__ */
diff --git a/drivers/staging/csr/csr_wifi_router_ctrl_lib.h b/drivers/staging/csr/csr_wifi_router_ctrl_lib.h
index 93d0fad..f235153 100644
--- a/drivers/staging/csr/csr_wifi_router_ctrl_lib.h
+++ b/drivers/staging/csr/csr_wifi_router_ctrl_lib.h
@@ -22,11 +22,6 @@
#include "csr_wifi_router_ctrl_prim.h"
#include "csr_wifi_router_task.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
/*----------------------------------------------------------------------------*
* CsrWifiRouterCtrlFreeUpstreamMessageContents
*
@@ -2084,9 +2079,4 @@
#define CsrWifiRouterCtrlWifiOnCfmSend(dst__, clientData__, status__) \
CsrWifiRouterCtrlWifiOnCfmSendTo(dst__, CSR_WIFI_ROUTER_IFACEQUEUE, clientData__, status__)
-
-#ifdef __cplusplus
-}
-#endif
-
#endif /* CSR_WIFI_ROUTER_CTRL_LIB_H__ */
diff --git a/drivers/staging/csr/csr_wifi_router_ctrl_prim.h b/drivers/staging/csr/csr_wifi_router_ctrl_prim.h
index ec972ac..1312a33 100644
--- a/drivers/staging/csr/csr_wifi_router_ctrl_prim.h
+++ b/drivers/staging/csr/csr_wifi_router_ctrl_prim.h
@@ -20,10 +20,6 @@
#include "csr_result.h"
#include "csr_wifi_fsm_event.h"
-#ifdef __cplusplus
-extern "C" {
-#endif
-
#define CSR_WIFI_ROUTER_CTRL_PRIM (0x0401)
typedef CsrPrim CsrWifiRouterCtrlPrim;
@@ -2113,10 +2109,5 @@
u8 *data;
} CsrWifiRouterCtrlWapiUnicastTxEncryptInd;
-
-#ifdef __cplusplus
-}
-#endif
-
#endif /* CSR_WIFI_ROUTER_CTRL_PRIM_H__ */
diff --git a/drivers/staging/csr/csr_wifi_router_ctrl_sef.c b/drivers/staging/csr/csr_wifi_router_ctrl_sef.c
index 33d92b6..99cf930 100644
--- a/drivers/staging/csr/csr_wifi_router_ctrl_sef.c
+++ b/drivers/staging/csr/csr_wifi_router_ctrl_sef.c
@@ -9,37 +9,38 @@
*****************************************************************************/
#include "csr_wifi_router_ctrl_sef.h"
-const CsrWifiRouterCtrlStateHandlerType CsrWifiRouterCtrlDownstreamStateHandlers[CSR_WIFI_ROUTER_CTRL_PRIM_DOWNSTREAM_COUNT] =
-{
- /* 0x0000 */ CsrWifiRouterCtrlConfigurePowerModeReqHandler,
- /* 0x0001 */ CsrWifiRouterCtrlHipReqHandler,
- /* 0x0002 */ CsrWifiRouterCtrlMediaStatusReqHandler,
- /* 0x0003 */ CsrWifiRouterCtrlMulticastAddressResHandler,
- /* 0x0004 */ CsrWifiRouterCtrlPortConfigureReqHandler,
- /* 0x0005 */ CsrWifiRouterCtrlQosControlReqHandler,
- /* 0x0006 */ CsrWifiRouterCtrlSuspendResHandler,
- /* 0x0007 */ CsrWifiRouterCtrlTclasAddReqHandler,
- /* 0x0008 */ CsrWifiRouterCtrlResumeResHandler,
- /* 0x0009 */ CsrWifiRouterCtrlRawSdioDeinitialiseReqHandler,
- /* 0x000A */ CsrWifiRouterCtrlRawSdioInitialiseReqHandler,
- /* 0x000B */ CsrWifiRouterCtrlTclasDelReqHandler,
- /* 0x000C */ CsrWifiRouterCtrlTrafficClassificationReqHandler,
- /* 0x000D */ CsrWifiRouterCtrlTrafficConfigReqHandler,
- /* 0x000E */ CsrWifiRouterCtrlWifiOffReqHandler,
- /* 0x000F */ CsrWifiRouterCtrlWifiOffResHandler,
- /* 0x0010 */ CsrWifiRouterCtrlWifiOnReqHandler,
- /* 0x0011 */ CsrWifiRouterCtrlWifiOnResHandler,
- /* 0x0012 */ CsrWifiRouterCtrlM4TransmitReqHandler,
- /* 0x0013 */ CsrWifiRouterCtrlModeSetReqHandler,
- /* 0x0014 */ CsrWifiRouterCtrlPeerAddReqHandler,
- /* 0x0015 */ CsrWifiRouterCtrlPeerDelReqHandler,
- /* 0x0016 */ CsrWifiRouterCtrlPeerUpdateReqHandler,
- /* 0x0017 */ CsrWifiRouterCtrlCapabilitiesReqHandler,
- /* 0x0018 */ CsrWifiRouterCtrlBlockAckEnableReqHandler,
- /* 0x0019 */ CsrWifiRouterCtrlBlockAckDisableReqHandler,
- /* 0x001A */ CsrWifiRouterCtrlWapiRxPktReqHandler,
- /* 0x001B */ CsrWifiRouterCtrlWapiMulticastFilterReqHandler,
- /* 0x001C */ CsrWifiRouterCtrlWapiUnicastFilterReqHandler,
- /* 0x001D */ CsrWifiRouterCtrlWapiUnicastTxPktReqHandler,
- /* 0x001E */ CsrWifiRouterCtrlWapiFilterReqHandler,
+const CsrWifiRouterCtrlStateHandlerType
+ CsrWifiRouterCtrlDownstreamStateHandlers
+ [CSR_WIFI_ROUTER_CTRL_PRIM_DOWNSTREAM_COUNT] = {
+ /* 0x0000 */ CsrWifiRouterCtrlConfigurePowerModeReqHandler,
+ /* 0x0001 */ CsrWifiRouterCtrlHipReqHandler,
+ /* 0x0002 */ CsrWifiRouterCtrlMediaStatusReqHandler,
+ /* 0x0003 */ CsrWifiRouterCtrlMulticastAddressResHandler,
+ /* 0x0004 */ CsrWifiRouterCtrlPortConfigureReqHandler,
+ /* 0x0005 */ CsrWifiRouterCtrlQosControlReqHandler,
+ /* 0x0006 */ CsrWifiRouterCtrlSuspendResHandler,
+ /* 0x0007 */ CsrWifiRouterCtrlTclasAddReqHandler,
+ /* 0x0008 */ CsrWifiRouterCtrlResumeResHandler,
+ /* 0x0009 */ CsrWifiRouterCtrlRawSdioDeinitialiseReqHandler,
+ /* 0x000A */ CsrWifiRouterCtrlRawSdioInitialiseReqHandler,
+ /* 0x000B */ CsrWifiRouterCtrlTclasDelReqHandler,
+ /* 0x000C */ CsrWifiRouterCtrlTrafficClassificationReqHandler,
+ /* 0x000D */ CsrWifiRouterCtrlTrafficConfigReqHandler,
+ /* 0x000E */ CsrWifiRouterCtrlWifiOffReqHandler,
+ /* 0x000F */ CsrWifiRouterCtrlWifiOffResHandler,
+ /* 0x0010 */ CsrWifiRouterCtrlWifiOnReqHandler,
+ /* 0x0011 */ CsrWifiRouterCtrlWifiOnResHandler,
+ /* 0x0012 */ CsrWifiRouterCtrlM4TransmitReqHandler,
+ /* 0x0013 */ CsrWifiRouterCtrlModeSetReqHandler,
+ /* 0x0014 */ CsrWifiRouterCtrlPeerAddReqHandler,
+ /* 0x0015 */ CsrWifiRouterCtrlPeerDelReqHandler,
+ /* 0x0016 */ CsrWifiRouterCtrlPeerUpdateReqHandler,
+ /* 0x0017 */ CsrWifiRouterCtrlCapabilitiesReqHandler,
+ /* 0x0018 */ CsrWifiRouterCtrlBlockAckEnableReqHandler,
+ /* 0x0019 */ CsrWifiRouterCtrlBlockAckDisableReqHandler,
+ /* 0x001A */ CsrWifiRouterCtrlWapiRxPktReqHandler,
+ /* 0x001B */ CsrWifiRouterCtrlWapiMulticastFilterReqHandler,
+ /* 0x001C */ CsrWifiRouterCtrlWapiUnicastFilterReqHandler,
+ /* 0x001D */ CsrWifiRouterCtrlWapiUnicastTxPktReqHandler,
+ /* 0x001E */ CsrWifiRouterCtrlWapiFilterReqHandler,
};
diff --git a/drivers/staging/csr/csr_wifi_router_ctrl_sef.h b/drivers/staging/csr/csr_wifi_router_ctrl_sef.h
index e0ee5cf..2fb4937 100644
--- a/drivers/staging/csr/csr_wifi_router_ctrl_sef.h
+++ b/drivers/staging/csr/csr_wifi_router_ctrl_sef.h
@@ -12,10 +12,6 @@
#include "csr_wifi_router_ctrl_prim.h"
-#ifdef __cplusplus
-extern "C" {
-#endif
-
typedef void (*CsrWifiRouterCtrlStateHandlerType)(void* drvpriv, CsrWifiFsmEvent* msg);
extern const CsrWifiRouterCtrlStateHandlerType CsrWifiRouterCtrlDownstreamStateHandlers[CSR_WIFI_ROUTER_CTRL_PRIM_DOWNSTREAM_COUNT];
@@ -51,8 +47,5 @@
extern void CsrWifiRouterCtrlWapiUnicastTxPktReqHandler(void* drvpriv, CsrWifiFsmEvent* msg);
extern void CsrWifiRouterCtrlWapiUnicastFilterReqHandler(void* drvpriv, CsrWifiFsmEvent* msg);
extern void CsrWifiRouterCtrlWapiFilterReqHandler(void* drvpriv, CsrWifiFsmEvent* msg);
-#ifdef __cplusplus
-}
-#endif
#endif /* CSR_WIFI_ROUTER_SEF_CSR_WIFI_ROUTER_CTRL_H__ */
diff --git a/drivers/staging/csr/csr_wifi_router_ctrl_serialize.h b/drivers/staging/csr/csr_wifi_router_ctrl_serialize.h
index 2c2a229..c904838 100644
--- a/drivers/staging/csr/csr_wifi_router_ctrl_serialize.h
+++ b/drivers/staging/csr/csr_wifi_router_ctrl_serialize.h
@@ -17,10 +17,6 @@
#include "csr_wifi_router_ctrl_prim.h"
-#ifdef __cplusplus
-extern "C" {
-#endif
-
extern void CsrWifiRouterCtrlPfree(void *ptr);
extern u8* CsrWifiRouterCtrlConfigurePowerModeReqSer(u8 *ptr, size_t *len, void *msg);
@@ -333,9 +329,5 @@
extern size_t CsrWifiRouterCtrlWapiUnicastTxEncryptIndSizeof(void *msg);
extern void CsrWifiRouterCtrlWapiUnicastTxEncryptIndSerFree(void *msg);
-
-#ifdef __cplusplus
-}
-#endif
#endif /* CSR_WIFI_ROUTER_CTRL_SERIALIZE_H__ */
diff --git a/drivers/staging/csr/csr_wifi_router_free_upstream_contents.c b/drivers/staging/csr/csr_wifi_router_free_upstream_contents.c
index de1086d..4cd1263 100644
--- a/drivers/staging/csr/csr_wifi_router_free_upstream_contents.c
+++ b/drivers/staging/csr/csr_wifi_router_free_upstream_contents.c
@@ -1,10 +1,10 @@
/*****************************************************************************
- (c) Cambridge Silicon Radio Limited 2011
- All rights reserved and confidential information of CSR
+ (c) Cambridge Silicon Radio Limited 2011
+ All rights reserved and confidential information of CSR
- Refer to LICENSE.txt included with this source for details
- on the license terms.
+ Refer to LICENSE.txt included with this source for details
+ on the license terms.
*****************************************************************************/
@@ -26,28 +26,22 @@
*----------------------------------------------------------------------------*/
void CsrWifiRouterFreeUpstreamMessageContents(u16 eventClass, void *message)
{
- if (eventClass != CSR_WIFI_ROUTER_PRIM)
- {
- return;
- }
- if (NULL == message)
- {
- return;
- }
-
- switch (*((CsrWifiRouterPrim *) message))
- {
- case CSR_WIFI_ROUTER_MA_PACKET_IND:
- {
- CsrWifiRouterMaPacketInd *p = (CsrWifiRouterMaPacketInd *)message;
- kfree(p->frame);
- p->frame = NULL;
- break;
- }
-
- default:
- break;
- }
+ if (eventClass != CSR_WIFI_ROUTER_PRIM)
+ return;
+ if (NULL == message)
+ return;
+ switch (*((CsrWifiRouterPrim *) message)) {
+ case CSR_WIFI_ROUTER_MA_PACKET_IND:
+ {
+ CsrWifiRouterMaPacketInd *p =
+ (CsrWifiRouterMaPacketInd *) message;
+ kfree(p->frame);
+ p->frame = NULL;
+ break;
+ }
+ default:
+ break;
+ }
}
diff --git a/drivers/staging/csr/csr_wifi_router_lib.h b/drivers/staging/csr/csr_wifi_router_lib.h
index 06a2214..b0477c4 100644
--- a/drivers/staging/csr/csr_wifi_router_lib.h
+++ b/drivers/staging/csr/csr_wifi_router_lib.h
@@ -22,11 +22,6 @@
#include "csr_wifi_router_prim.h"
#include "csr_wifi_router_task.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
/*----------------------------------------------------------------------------*
* CsrWifiRouterFreeUpstreamMessageContents
*
@@ -419,9 +414,4 @@
#define CsrWifiRouterMaPacketUnsubscribeCfmSend(dst__, interfaceTag__, status__) \
CsrWifiRouterMaPacketUnsubscribeCfmSendTo(dst__, CSR_WIFI_ROUTER_IFACEQUEUE, interfaceTag__, status__)
-
-#ifdef __cplusplus
-}
-#endif
-
#endif /* CSR_WIFI_ROUTER_LIB_H__ */
diff --git a/drivers/staging/csr/csr_wifi_router_prim.h b/drivers/staging/csr/csr_wifi_router_prim.h
index c61486f..c52344b 100644
--- a/drivers/staging/csr/csr_wifi_router_prim.h
+++ b/drivers/staging/csr/csr_wifi_router_prim.h
@@ -20,10 +20,6 @@
#include "csr_result.h"
#include "csr_wifi_fsm_event.h"
-#ifdef __cplusplus
-extern "C" {
-#endif
-
#define CSR_WIFI_ROUTER_PRIM (0x0400)
typedef CsrPrim CsrWifiRouterPrim;
@@ -421,10 +417,5 @@
u16 rate;
} CsrWifiRouterMaPacketInd;
-
-#ifdef __cplusplus
-}
-#endif
-
#endif /* CSR_WIFI_ROUTER_PRIM_H__ */
diff --git a/drivers/staging/csr/csr_wifi_router_sef.h b/drivers/staging/csr/csr_wifi_router_sef.h
index 49dd158..86692c7 100644
--- a/drivers/staging/csr/csr_wifi_router_sef.h
+++ b/drivers/staging/csr/csr_wifi_router_sef.h
@@ -12,10 +12,6 @@
#include "csr_wifi_router_prim.h"
-#ifdef __cplusplus
-extern "C" {
-#endif
-
typedef void (*CsrWifiRouterStateHandlerType)(void* drvpriv, CsrWifiFsmEvent* msg);
extern const CsrWifiRouterStateHandlerType CsrWifiRouterDownstreamStateHandlers[CSR_WIFI_ROUTER_PRIM_DOWNSTREAM_COUNT];
@@ -26,8 +22,4 @@
extern void CsrWifiRouterMaPacketResHandler(void* drvpriv, CsrWifiFsmEvent* msg);
extern void CsrWifiRouterMaPacketCancelReqHandler(void* drvpriv, CsrWifiFsmEvent* msg);
-#ifdef __cplusplus
-}
-#endif
-
#endif /* CSR_WIFI_ROUTER_SEF_CSR_WIFI_ROUTER_H__ */
diff --git a/drivers/staging/csr/csr_wifi_router_serialize.h b/drivers/staging/csr/csr_wifi_router_serialize.h
index 07e21b2..94ccdac 100644
--- a/drivers/staging/csr/csr_wifi_router_serialize.h
+++ b/drivers/staging/csr/csr_wifi_router_serialize.h
@@ -16,10 +16,6 @@
#include "csr_wifi_msgconv.h"
#include "csr_wifi_router_prim.h"
-#ifdef __cplusplus
-extern "C" {
-#endif
-
extern void CsrWifiRouterPfree(void *ptr);
extern u8* CsrWifiRouterMaPacketSubscribeReqSer(u8 *ptr, size_t *len, void *msg);
@@ -67,9 +63,5 @@
extern size_t CsrWifiRouterMaPacketIndSizeof(void *msg);
extern void CsrWifiRouterMaPacketIndSerFree(void *msg);
-
-#ifdef __cplusplus
-}
-#endif
#endif /* CSR_WIFI_ROUTER_SERIALIZE_H__ */
diff --git a/drivers/staging/csr/csr_wifi_router_task.h b/drivers/staging/csr/csr_wifi_router_task.h
index 4e51fae..9ba892f 100644
--- a/drivers/staging/csr/csr_wifi_router_task.h
+++ b/drivers/staging/csr/csr_wifi_router_task.h
@@ -15,19 +15,11 @@
#include "csr_sched.h"
-#ifdef __cplusplus
-extern "C" {
-#endif
-
#define CSR_WIFI_ROUTER_LOG_ID 0x1201FFFF
extern CsrSchedQid CSR_WIFI_ROUTER_IFACEQUEUE;
void CsrWifiRouterInit(void **gash);
void CsrWifiRouterDeinit(void **gash);
void CsrWifiRouterHandler(void **gash);
-#ifdef __cplusplus
-}
-#endif
-
#endif /* CSR_WIFI_ROUTER_TASK_H__ */
diff --git a/drivers/staging/csr/csr_wifi_sme_ap_lib.h b/drivers/staging/csr/csr_wifi_sme_ap_lib.h
index 350cb9e..48ea914 100644
--- a/drivers/staging/csr/csr_wifi_sme_ap_lib.h
+++ b/drivers/staging/csr/csr_wifi_sme_ap_lib.h
@@ -22,11 +22,6 @@
#include "csr_wifi_sme_ap_prim.h"
#include "csr_wifi_sme_task.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
#ifndef CSR_WIFI_AP_ENABLE
#error CSR_WIFI_AP_ENABLE MUST be defined inorder to use csr_wifi_sme_ap_lib.h
#endif
@@ -776,8 +771,4 @@
CsrWifiSmeApWpsRegistrationStartedCfmSendTo(dst__, CSR_WIFI_SME_IFACEQUEUE, interfaceTag__, status__)
-#ifdef __cplusplus
-}
-#endif
-
#endif /* CSR_WIFI_SME_AP_LIB_H__ */
diff --git a/drivers/staging/csr/csr_wifi_sme_ap_prim.h b/drivers/staging/csr/csr_wifi_sme_ap_prim.h
index 93b64e9..3c4bcbc 100644
--- a/drivers/staging/csr/csr_wifi_sme_ap_prim.h
+++ b/drivers/staging/csr/csr_wifi_sme_ap_prim.h
@@ -20,10 +20,6 @@
#include "csr_wifi_fsm_event.h"
#include "csr_wifi_sme_prim.h"
-#ifdef __cplusplus
-extern "C" {
-#endif
-
#ifndef CSR_WIFI_AP_ENABLE
#error CSR_WIFI_AP_ENABLE MUST be defined inorder to use csr_wifi_sme_ap_prim.h
#endif
@@ -1030,9 +1026,5 @@
} CsrWifiSmeApBaDeleteCfm;
-#ifdef __cplusplus
-}
-#endif
-
#endif /* CSR_WIFI_SME_AP_PRIM_H__ */
diff --git a/drivers/staging/csr/csr_wifi_sme_converter_init.h b/drivers/staging/csr/csr_wifi_sme_converter_init.h
index fb895de..ba5e4b4 100644
--- a/drivers/staging/csr/csr_wifi_sme_converter_init.h
+++ b/drivers/staging/csr/csr_wifi_sme_converter_init.h
@@ -13,10 +13,6 @@
#ifndef CSR_WIFI_SME_CONVERTER_INIT_H__
#define CSR_WIFI_SME_CONVERTER_INIT_H__
-#ifdef __cplusplus
-extern "C" {
-#endif
-
#ifndef EXCLUDE_CSR_WIFI_SME_MODULE
#include "csr_msgconv.h"
@@ -35,8 +31,4 @@
#endif /* EXCLUDE_CSR_WIFI_SME_MODULE */
-#ifdef __cplusplus
-}
-#endif
-
#endif /* CSR_WIFI_SME_CONVERTER_INIT_H__ */
diff --git a/drivers/staging/csr/csr_wifi_sme_lib.h b/drivers/staging/csr/csr_wifi_sme_lib.h
index 3ca7456..53cf126 100644
--- a/drivers/staging/csr/csr_wifi_sme_lib.h
+++ b/drivers/staging/csr/csr_wifi_sme_lib.h
@@ -32,11 +32,6 @@
# endif
#endif
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
/*----------------------------------------------------------------------------*
* CsrWifiSmeFreeUpstreamMessageContents
*
@@ -4305,9 +4300,4 @@
#define CsrWifiSmeWpsConfigurationCfmSend(dst__, status__) \
CsrWifiSmeWpsConfigurationCfmSendTo(dst__, CSR_WIFI_SME_IFACEQUEUE, status__)
-
-#ifdef __cplusplus
-}
-#endif
-
#endif /* CSR_WIFI_SME_LIB_H__ */
diff --git a/drivers/staging/csr/csr_wifi_sme_prim.h b/drivers/staging/csr/csr_wifi_sme_prim.h
index 55cac50..17ec79c 100644
--- a/drivers/staging/csr/csr_wifi_sme_prim.h
+++ b/drivers/staging/csr/csr_wifi_sme_prim.h
@@ -20,10 +20,6 @@
#include "csr_result.h"
#include "csr_wifi_fsm_event.h"
-#ifdef __cplusplus
-extern "C" {
-#endif
-
#define CSR_WIFI_SME_PRIM (0x0404)
typedef CsrPrim CsrWifiSmePrim;
@@ -6510,10 +6506,5 @@
CsrResult status;
} CsrWifiSmeWpsConfigurationCfm;
-
-#ifdef __cplusplus
-}
-#endif
-
#endif /* CSR_WIFI_SME_PRIM_H__ */
diff --git a/drivers/staging/csr/csr_wifi_sme_sef.h b/drivers/staging/csr/csr_wifi_sme_sef.h
index c874181..78b88c0 100644
--- a/drivers/staging/csr/csr_wifi_sme_sef.h
+++ b/drivers/staging/csr/csr_wifi_sme_sef.h
@@ -1,10 +1,10 @@
/*****************************************************************************
- (c) Cambridge Silicon Radio Limited 2010
- Confidential information of CSR
+ (c) Cambridge Silicon Radio Limited 2010
+ Confidential information of CSR
- Refer to LICENSE.txt included with this source for details
- on the license terms.
+ Refer to LICENSE.txt included with this source for details
+ on the license terms.
*****************************************************************************/
#ifndef CSR_WIFI_ROUTER_SEF_CSR_WIFI_SME_H__
@@ -12,90 +12,131 @@
#include "csr_wifi_sme_prim.h"
+typedef void (*CsrWifiSmeStateHandlerType)(void *drvpriv, CsrWifiFsmEvent *msg);
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef void (*CsrWifiSmeStateHandlerType)(void* drvpriv, CsrWifiFsmEvent* msg);
-
-extern const CsrWifiSmeStateHandlerType CsrWifiSmeUpstreamStateHandlers[CSR_WIFI_SME_PRIM_UPSTREAM_COUNT];
+extern const CsrWifiSmeStateHandlerType
+ CsrWifiSmeUpstreamStateHandlers[CSR_WIFI_SME_PRIM_UPSTREAM_COUNT];
-extern void CsrWifiSmeActivateCfmHandler(void* drvpriv, CsrWifiFsmEvent* msg);
-extern void CsrWifiSmeAdhocConfigGetCfmHandler(void* drvpriv, CsrWifiFsmEvent* msg);
-extern void CsrWifiSmeAdhocConfigSetCfmHandler(void* drvpriv, CsrWifiFsmEvent* msg);
-extern void CsrWifiSmeAssociationCompleteIndHandler(void* drvpriv, CsrWifiFsmEvent* msg);
-extern void CsrWifiSmeAssociationStartIndHandler(void* drvpriv, CsrWifiFsmEvent* msg);
-extern void CsrWifiSmeBlacklistCfmHandler(void* drvpriv, CsrWifiFsmEvent* msg);
-extern void CsrWifiSmeCalibrationDataGetCfmHandler(void* drvpriv, CsrWifiFsmEvent* msg);
-extern void CsrWifiSmeCalibrationDataSetCfmHandler(void* drvpriv, CsrWifiFsmEvent* msg);
-extern void CsrWifiSmeCcxConfigGetCfmHandler(void* drvpriv, CsrWifiFsmEvent* msg);
-extern void CsrWifiSmeCcxConfigSetCfmHandler(void* drvpriv, CsrWifiFsmEvent* msg);
-extern void CsrWifiSmeCoexConfigGetCfmHandler(void* drvpriv, CsrWifiFsmEvent* msg);
-extern void CsrWifiSmeCoexConfigSetCfmHandler(void* drvpriv, CsrWifiFsmEvent* msg);
-extern void CsrWifiSmeCoexInfoGetCfmHandler(void* drvpriv, CsrWifiFsmEvent* msg);
-extern void CsrWifiSmeConnectCfmHandler(void* drvpriv, CsrWifiFsmEvent* msg);
-extern void CsrWifiSmeConnectionConfigGetCfmHandler(void* drvpriv, CsrWifiFsmEvent* msg);
-extern void CsrWifiSmeConnectionInfoGetCfmHandler(void* drvpriv, CsrWifiFsmEvent* msg);
-extern void CsrWifiSmeConnectionQualityIndHandler(void* drvpriv, CsrWifiFsmEvent* msg);
-extern void CsrWifiSmeConnectionStatsGetCfmHandler(void* drvpriv, CsrWifiFsmEvent* msg);
-extern void CsrWifiSmeDeactivateCfmHandler(void* drvpriv, CsrWifiFsmEvent* msg);
-extern void CsrWifiSmeDisconnectCfmHandler(void* drvpriv, CsrWifiFsmEvent* msg);
-extern void CsrWifiSmeEventMaskSetCfmHandler(void* drvpriv, CsrWifiFsmEvent* msg);
-extern void CsrWifiSmeHostConfigGetCfmHandler(void* drvpriv, CsrWifiFsmEvent* msg);
-extern void CsrWifiSmeHostConfigSetCfmHandler(void* drvpriv, CsrWifiFsmEvent* msg);
-extern void CsrWifiSmeIbssStationIndHandler(void* drvpriv, CsrWifiFsmEvent* msg);
-extern void CsrWifiSmeKeyCfmHandler(void* drvpriv, CsrWifiFsmEvent* msg);
-extern void CsrWifiSmeLinkQualityGetCfmHandler(void* drvpriv, CsrWifiFsmEvent* msg);
-extern void CsrWifiSmeMediaStatusIndHandler(void* drvpriv, CsrWifiFsmEvent* msg);
-extern void CsrWifiSmeMibConfigGetCfmHandler(void* drvpriv, CsrWifiFsmEvent* msg);
-extern void CsrWifiSmeMibConfigSetCfmHandler(void* drvpriv, CsrWifiFsmEvent* msg);
-extern void CsrWifiSmeMibGetCfmHandler(void* drvpriv, CsrWifiFsmEvent* msg);
-extern void CsrWifiSmeMibGetNextCfmHandler(void* drvpriv, CsrWifiFsmEvent* msg);
-extern void CsrWifiSmeMibSetCfmHandler(void* drvpriv, CsrWifiFsmEvent* msg);
-extern void CsrWifiSmeMicFailureIndHandler(void* drvpriv, CsrWifiFsmEvent* msg);
-extern void CsrWifiSmeMulticastAddressCfmHandler(void* drvpriv, CsrWifiFsmEvent* msg);
-extern void CsrWifiSmePacketFilterSetCfmHandler(void* drvpriv, CsrWifiFsmEvent* msg);
-extern void CsrWifiSmePermanentMacAddressGetCfmHandler(void* drvpriv, CsrWifiFsmEvent* msg);
-extern void CsrWifiSmePmkidCandidateListIndHandler(void* drvpriv, CsrWifiFsmEvent* msg);
-extern void CsrWifiSmePmkidCfmHandler(void* drvpriv, CsrWifiFsmEvent* msg);
-extern void CsrWifiSmePowerConfigGetCfmHandler(void* drvpriv, CsrWifiFsmEvent* msg);
-extern void CsrWifiSmePowerConfigSetCfmHandler(void* drvpriv, CsrWifiFsmEvent* msg);
-extern void CsrWifiSmeRegulatoryDomainInfoGetCfmHandler(void* drvpriv, CsrWifiFsmEvent* msg);
-extern void CsrWifiSmeRoamCompleteIndHandler(void* drvpriv, CsrWifiFsmEvent* msg);
-extern void CsrWifiSmeRoamStartIndHandler(void* drvpriv, CsrWifiFsmEvent* msg);
-extern void CsrWifiSmeRoamingConfigGetCfmHandler(void* drvpriv, CsrWifiFsmEvent* msg);
-extern void CsrWifiSmeRoamingConfigSetCfmHandler(void* drvpriv, CsrWifiFsmEvent* msg);
-extern void CsrWifiSmeScanConfigGetCfmHandler(void* drvpriv, CsrWifiFsmEvent* msg);
-extern void CsrWifiSmeScanConfigSetCfmHandler(void* drvpriv, CsrWifiFsmEvent* msg);
-extern void CsrWifiSmeScanFullCfmHandler(void* drvpriv, CsrWifiFsmEvent* msg);
-extern void CsrWifiSmeScanResultIndHandler(void* drvpriv, CsrWifiFsmEvent* msg);
-extern void CsrWifiSmeScanResultsFlushCfmHandler(void* drvpriv, CsrWifiFsmEvent* msg);
-extern void CsrWifiSmeScanResultsGetCfmHandler(void* drvpriv, CsrWifiFsmEvent* msg);
-extern void CsrWifiSmeSmeStaConfigGetCfmHandler(void* drvpriv, CsrWifiFsmEvent* msg);
-extern void CsrWifiSmeSmeStaConfigSetCfmHandler(void* drvpriv, CsrWifiFsmEvent* msg);
-extern void CsrWifiSmeStationMacAddressGetCfmHandler(void* drvpriv, CsrWifiFsmEvent* msg);
-extern void CsrWifiSmeTspecIndHandler(void* drvpriv, CsrWifiFsmEvent* msg);
-extern void CsrWifiSmeTspecCfmHandler(void* drvpriv, CsrWifiFsmEvent* msg);
-extern void CsrWifiSmeVersionsGetCfmHandler(void* drvpriv, CsrWifiFsmEvent* msg);
-extern void CsrWifiSmeWifiFlightmodeCfmHandler(void* drvpriv, CsrWifiFsmEvent* msg);
-extern void CsrWifiSmeWifiOffIndHandler(void* drvpriv, CsrWifiFsmEvent* msg);
-extern void CsrWifiSmeWifiOffCfmHandler(void* drvpriv, CsrWifiFsmEvent* msg);
-extern void CsrWifiSmeWifiOnCfmHandler(void* drvpriv, CsrWifiFsmEvent* msg);
-extern void CsrWifiSmeCloakedSsidsSetCfmHandler(void* drvpriv, CsrWifiFsmEvent* msg);
-extern void CsrWifiSmeCloakedSsidsGetCfmHandler(void* drvpriv, CsrWifiFsmEvent* msg);
-extern void CsrWifiSmeWifiOnIndHandler(void* drvpriv, CsrWifiFsmEvent* msg);
-extern void CsrWifiSmeSmeCommonConfigGetCfmHandler(void* drvpriv, CsrWifiFsmEvent* msg);
-extern void CsrWifiSmeSmeCommonConfigSetCfmHandler(void* drvpriv, CsrWifiFsmEvent* msg);
-extern void CsrWifiSmeGetInterfaceCapabilityCfmHandler(void* drvpriv, CsrWifiFsmEvent* msg);
-extern void CsrWifiSmeErrorIndHandler(void* drvpriv, CsrWifiFsmEvent* msg);
-extern void CsrWifiSmeInfoIndHandler(void* drvpriv, CsrWifiFsmEvent* msg);
-extern void CsrWifiSmeCoreDumpIndHandler(void* drvpriv, CsrWifiFsmEvent* msg);
-extern void CsrWifiSmeAmpStatusChangeIndHandler(void* drvpriv, CsrWifiFsmEvent* msg);
-
-#ifdef __cplusplus
-}
-#endif
+extern void CsrWifiSmeActivateCfmHandler(void *drvpriv, CsrWifiFsmEvent *msg);
+extern void CsrWifiSmeAdhocConfigGetCfmHandler(void *drvpriv,
+ CsrWifiFsmEvent *msg);
+extern void CsrWifiSmeAdhocConfigSetCfmHandler(void *drvpriv,
+ CsrWifiFsmEvent *msg);
+extern void CsrWifiSmeAssociationCompleteIndHandler(void *drvpriv,
+ CsrWifiFsmEvent *msg);
+extern void CsrWifiSmeAssociationStartIndHandler(void *drvpriv,
+ CsrWifiFsmEvent *msg);
+extern void CsrWifiSmeBlacklistCfmHandler(void *drvpriv,
+ CsrWifiFsmEvent *msg);
+extern void CsrWifiSmeCalibrationDataGetCfmHandler(void *drvpriv,
+ CsrWifiFsmEvent *msg);
+extern void CsrWifiSmeCalibrationDataSetCfmHandler(void *drvpriv,
+ CsrWifiFsmEvent *msg);
+extern void CsrWifiSmeCcxConfigGetCfmHandler(void *drvpriv,
+ CsrWifiFsmEvent *msg);
+extern void CsrWifiSmeCcxConfigSetCfmHandler(void *drvpriv,
+ CsrWifiFsmEvent *msg);
+extern void CsrWifiSmeCoexConfigGetCfmHandler(void *drvpriv,
+ CsrWifiFsmEvent *msg);
+extern void CsrWifiSmeCoexConfigSetCfmHandler(void *drvpriv,
+ CsrWifiFsmEvent *msg);
+extern void CsrWifiSmeCoexInfoGetCfmHandler(void *drvpriv,
+ CsrWifiFsmEvent *msg);
+extern void CsrWifiSmeConnectCfmHandler(void *drvpriv, CsrWifiFsmEvent *msg);
+extern void CsrWifiSmeConnectionConfigGetCfmHandler(void *drvpriv,
+ CsrWifiFsmEvent *msg);
+extern void CsrWifiSmeConnectionInfoGetCfmHandler(void *drvpriv,
+ CsrWifiFsmEvent *msg);
+extern void CsrWifiSmeConnectionQualityIndHandler(void *drvpriv,
+ CsrWifiFsmEvent *msg);
+extern void CsrWifiSmeConnectionStatsGetCfmHandler(void *drvpriv,
+ CsrWifiFsmEvent *msg);
+extern void CsrWifiSmeDeactivateCfmHandler(void *drvpriv, CsrWifiFsmEvent *msg);
+extern void CsrWifiSmeDisconnectCfmHandler(void *drvpriv, CsrWifiFsmEvent *msg);
+extern void CsrWifiSmeEventMaskSetCfmHandler(void *drvpriv,
+ CsrWifiFsmEvent *msg);
+extern void CsrWifiSmeHostConfigGetCfmHandler(void *drvpriv,
+ CsrWifiFsmEvent *msg);
+extern void CsrWifiSmeHostConfigSetCfmHandler(void *drvpriv,
+ CsrWifiFsmEvent *msg);
+extern void CsrWifiSmeIbssStationIndHandler(void *drvpriv,
+ CsrWifiFsmEvent *msg);
+extern void CsrWifiSmeKeyCfmHandler(void *drvpriv, CsrWifiFsmEvent *msg);
+extern void CsrWifiSmeLinkQualityGetCfmHandler(void *drvpriv,
+ CsrWifiFsmEvent *msg);
+extern void CsrWifiSmeMediaStatusIndHandler(void *drvpriv,
+ CsrWifiFsmEvent *msg);
+extern void CsrWifiSmeMibConfigGetCfmHandler(void *drvpriv,
+ CsrWifiFsmEvent *msg);
+extern void CsrWifiSmeMibConfigSetCfmHandler(void *drvpriv,
+ CsrWifiFsmEvent *msg);
+extern void CsrWifiSmeMibGetCfmHandler(void *drvpriv, CsrWifiFsmEvent *msg);
+extern void CsrWifiSmeMibGetNextCfmHandler(void *drvpriv, CsrWifiFsmEvent *msg);
+extern void CsrWifiSmeMibSetCfmHandler(void *drvpriv, CsrWifiFsmEvent *msg);
+extern void CsrWifiSmeMicFailureIndHandler(void *drvpriv, CsrWifiFsmEvent *msg);
+extern void CsrWifiSmeMulticastAddressCfmHandler(void *drvpriv,
+ CsrWifiFsmEvent *msg);
+extern void CsrWifiSmePacketFilterSetCfmHandler(void *drvpriv,
+ CsrWifiFsmEvent *msg);
+extern void CsrWifiSmePermanentMacAddressGetCfmHandler(void *drvpriv,
+ CsrWifiFsmEvent *msg);
+extern void CsrWifiSmePmkidCandidateListIndHandler(void *drvpriv,
+ CsrWifiFsmEvent *msg);
+extern void CsrWifiSmePmkidCfmHandler(void *drvpriv, CsrWifiFsmEvent *msg);
+extern void CsrWifiSmePowerConfigGetCfmHandler(void *drvpriv,
+ CsrWifiFsmEvent *msg);
+extern void CsrWifiSmePowerConfigSetCfmHandler(void *drvpriv,
+ CsrWifiFsmEvent *msg);
+extern void CsrWifiSmeRegulatoryDomainInfoGetCfmHandler(void *drvpriv,
+ CsrWifiFsmEvent *msg);
+extern void CsrWifiSmeRoamCompleteIndHandler(void *drvpriv,
+ CsrWifiFsmEvent *msg);
+extern void CsrWifiSmeRoamStartIndHandler(void *drvpriv, CsrWifiFsmEvent *msg);
+extern void CsrWifiSmeRoamingConfigGetCfmHandler(void *drvpriv,
+ CsrWifiFsmEvent *msg);
+extern void CsrWifiSmeRoamingConfigSetCfmHandler(void *drvpriv,
+ CsrWifiFsmEvent *msg);
+extern void CsrWifiSmeScanConfigGetCfmHandler(void *drvpriv,
+ CsrWifiFsmEvent *msg);
+extern void CsrWifiSmeScanConfigSetCfmHandler(void *drvpriv,
+ CsrWifiFsmEvent *msg);
+extern void CsrWifiSmeScanFullCfmHandler(void *drvpriv, CsrWifiFsmEvent *msg);
+extern void CsrWifiSmeScanResultIndHandler(void *drvpriv, CsrWifiFsmEvent *msg);
+extern void CsrWifiSmeScanResultsFlushCfmHandler(void *drvpriv,
+ CsrWifiFsmEvent *msg);
+extern void CsrWifiSmeScanResultsGetCfmHandler(void *drvpriv,
+ CsrWifiFsmEvent *msg);
+extern void CsrWifiSmeSmeStaConfigGetCfmHandler(void *drvpriv,
+ CsrWifiFsmEvent *msg);
+extern void CsrWifiSmeSmeStaConfigSetCfmHandler(void *drvpriv,
+ CsrWifiFsmEvent *msg);
+extern void CsrWifiSmeStationMacAddressGetCfmHandler(void *drvpriv,
+ CsrWifiFsmEvent *msg);
+extern void CsrWifiSmeTspecIndHandler(void *drvpriv, CsrWifiFsmEvent *msg);
+extern void CsrWifiSmeTspecCfmHandler(void *drvpriv, CsrWifiFsmEvent *msg);
+extern void CsrWifiSmeVersionsGetCfmHandler(void *drvpriv,
+ CsrWifiFsmEvent *msg);
+extern void CsrWifiSmeWifiFlightmodeCfmHandler(void *drvpriv,
+ CsrWifiFsmEvent *msg);
+extern void CsrWifiSmeWifiOffIndHandler(void *drvpriv, CsrWifiFsmEvent *msg);
+extern void CsrWifiSmeWifiOffCfmHandler(void *drvpriv, CsrWifiFsmEvent *msg);
+extern void CsrWifiSmeWifiOnCfmHandler(void *drvpriv, CsrWifiFsmEvent *msg);
+extern void CsrWifiSmeCloakedSsidsSetCfmHandler(void *drvpriv,
+ CsrWifiFsmEvent *msg);
+extern void CsrWifiSmeCloakedSsidsGetCfmHandler(void *drvpriv,
+ CsrWifiFsmEvent *msg);
+extern void CsrWifiSmeWifiOnIndHandler(void *drvpriv, CsrWifiFsmEvent *msg);
+extern void CsrWifiSmeSmeCommonConfigGetCfmHandler(void *drvpriv,
+ CsrWifiFsmEvent *msg);
+extern void CsrWifiSmeSmeCommonConfigSetCfmHandler(void *drvpriv,
+ CsrWifiFsmEvent *msg);
+extern void CsrWifiSmeGetInterfaceCapabilityCfmHandler(void *drvpriv,
+ CsrWifiFsmEvent *msg);
+extern void CsrWifiSmeErrorIndHandler(void *drvpriv, CsrWifiFsmEvent *msg);
+extern void CsrWifiSmeInfoIndHandler(void *drvpriv, CsrWifiFsmEvent *msg);
+extern void CsrWifiSmeCoreDumpIndHandler(void *drvpriv, CsrWifiFsmEvent *msg);
+extern void CsrWifiSmeAmpStatusChangeIndHandler(void *drvpriv,
+ CsrWifiFsmEvent *msg);
#endif /* CSR_WIFI_ROUTER_SEF_CSR_WIFI_SME_H__ */
diff --git a/drivers/staging/csr/csr_wifi_sme_serialize.h b/drivers/staging/csr/csr_wifi_sme_serialize.h
index 4f3af0a..f852626 100644
--- a/drivers/staging/csr/csr_wifi_sme_serialize.h
+++ b/drivers/staging/csr/csr_wifi_sme_serialize.h
@@ -1,10 +1,10 @@
/*****************************************************************************
- (c) Cambridge Silicon Radio Limited 2012
- All rights reserved and confidential information of CSR
+ (c) Cambridge Silicon Radio Limited 2012
+ All rights reserved and confidential information of CSR
- Refer to LICENSE.txt included with this source for details
- on the license terms.
+ Refer to LICENSE.txt included with this source for details
+ on the license terms.
*****************************************************************************/
@@ -16,10 +16,6 @@
#include "csr_wifi_msgconv.h"
#include "csr_wifi_sme_prim.h"
-#ifdef __cplusplus
-extern "C" {
-#endif
-
extern void CsrWifiSmePfree(void *ptr);
#define CsrWifiSmeActivateReqSer CsrWifiEventSer
@@ -32,13 +28,13 @@
#define CsrWifiSmeAdhocConfigGetReqSizeof CsrWifiEventSizeof
#define CsrWifiSmeAdhocConfigGetReqSerFree CsrWifiSmePfree
-extern u8* CsrWifiSmeAdhocConfigSetReqSer(u8 *ptr, size_t *len, void *msg);
-extern void* CsrWifiSmeAdhocConfigSetReqDes(u8 *buffer, size_t len);
+extern u8 *CsrWifiSmeAdhocConfigSetReqSer(u8 *ptr, size_t *len, void *msg);
+extern void *CsrWifiSmeAdhocConfigSetReqDes(u8 *buffer, size_t len);
extern size_t CsrWifiSmeAdhocConfigSetReqSizeof(void *msg);
#define CsrWifiSmeAdhocConfigSetReqSerFree CsrWifiSmePfree
-extern u8* CsrWifiSmeBlacklistReqSer(u8 *ptr, size_t *len, void *msg);
-extern void* CsrWifiSmeBlacklistReqDes(u8 *buffer, size_t len);
+extern u8 *CsrWifiSmeBlacklistReqSer(u8 *ptr, size_t *len, void *msg);
+extern void *CsrWifiSmeBlacklistReqDes(u8 *buffer, size_t len);
extern size_t CsrWifiSmeBlacklistReqSizeof(void *msg);
extern void CsrWifiSmeBlacklistReqSerFree(void *msg);
@@ -47,8 +43,8 @@
#define CsrWifiSmeCalibrationDataGetReqSizeof CsrWifiEventSizeof
#define CsrWifiSmeCalibrationDataGetReqSerFree CsrWifiSmePfree
-extern u8* CsrWifiSmeCalibrationDataSetReqSer(u8 *ptr, size_t *len, void *msg);
-extern void* CsrWifiSmeCalibrationDataSetReqDes(u8 *buffer, size_t len);
+extern u8 *CsrWifiSmeCalibrationDataSetReqSer(u8 *ptr, size_t *len, void *msg);
+extern void *CsrWifiSmeCalibrationDataSetReqDes(u8 *buffer, size_t len);
extern size_t CsrWifiSmeCalibrationDataSetReqSizeof(void *msg);
extern void CsrWifiSmeCalibrationDataSetReqSerFree(void *msg);
@@ -57,8 +53,8 @@
#define CsrWifiSmeCcxConfigGetReqSizeof CsrWifiEventCsrUint16Sizeof
#define CsrWifiSmeCcxConfigGetReqSerFree CsrWifiSmePfree
-extern u8* CsrWifiSmeCcxConfigSetReqSer(u8 *ptr, size_t *len, void *msg);
-extern void* CsrWifiSmeCcxConfigSetReqDes(u8 *buffer, size_t len);
+extern u8 *CsrWifiSmeCcxConfigSetReqSer(u8 *ptr, size_t *len, void *msg);
+extern void *CsrWifiSmeCcxConfigSetReqDes(u8 *buffer, size_t len);
extern size_t CsrWifiSmeCcxConfigSetReqSizeof(void *msg);
#define CsrWifiSmeCcxConfigSetReqSerFree CsrWifiSmePfree
@@ -67,8 +63,8 @@
#define CsrWifiSmeCoexConfigGetReqSizeof CsrWifiEventSizeof
#define CsrWifiSmeCoexConfigGetReqSerFree CsrWifiSmePfree
-extern u8* CsrWifiSmeCoexConfigSetReqSer(u8 *ptr, size_t *len, void *msg);
-extern void* CsrWifiSmeCoexConfigSetReqDes(u8 *buffer, size_t len);
+extern u8 *CsrWifiSmeCoexConfigSetReqSer(u8 *ptr, size_t *len, void *msg);
+extern void *CsrWifiSmeCoexConfigSetReqDes(u8 *buffer, size_t len);
extern size_t CsrWifiSmeCoexConfigSetReqSizeof(void *msg);
#define CsrWifiSmeCoexConfigSetReqSerFree CsrWifiSmePfree
@@ -77,8 +73,8 @@
#define CsrWifiSmeCoexInfoGetReqSizeof CsrWifiEventSizeof
#define CsrWifiSmeCoexInfoGetReqSerFree CsrWifiSmePfree
-extern u8* CsrWifiSmeConnectReqSer(u8 *ptr, size_t *len, void *msg);
-extern void* CsrWifiSmeConnectReqDes(u8 *buffer, size_t len);
+extern u8 *CsrWifiSmeConnectReqSer(u8 *ptr, size_t *len, void *msg);
+extern void *CsrWifiSmeConnectReqDes(u8 *buffer, size_t len);
extern size_t CsrWifiSmeConnectReqSizeof(void *msg);
extern void CsrWifiSmeConnectReqSerFree(void *msg);
@@ -117,13 +113,13 @@
#define CsrWifiSmeHostConfigGetReqSizeof CsrWifiEventCsrUint16Sizeof
#define CsrWifiSmeHostConfigGetReqSerFree CsrWifiSmePfree
-extern u8* CsrWifiSmeHostConfigSetReqSer(u8 *ptr, size_t *len, void *msg);
-extern void* CsrWifiSmeHostConfigSetReqDes(u8 *buffer, size_t len);
+extern u8 *CsrWifiSmeHostConfigSetReqSer(u8 *ptr, size_t *len, void *msg);
+extern void *CsrWifiSmeHostConfigSetReqDes(u8 *buffer, size_t len);
extern size_t CsrWifiSmeHostConfigSetReqSizeof(void *msg);
#define CsrWifiSmeHostConfigSetReqSerFree CsrWifiSmePfree
-extern u8* CsrWifiSmeKeyReqSer(u8 *ptr, size_t *len, void *msg);
-extern void* CsrWifiSmeKeyReqDes(u8 *buffer, size_t len);
+extern u8 *CsrWifiSmeKeyReqSer(u8 *ptr, size_t *len, void *msg);
+extern void *CsrWifiSmeKeyReqDes(u8 *buffer, size_t len);
extern size_t CsrWifiSmeKeyReqSizeof(void *msg);
#define CsrWifiSmeKeyReqSerFree CsrWifiSmePfree
@@ -137,33 +133,33 @@
#define CsrWifiSmeMibConfigGetReqSizeof CsrWifiEventSizeof
#define CsrWifiSmeMibConfigGetReqSerFree CsrWifiSmePfree
-extern u8* CsrWifiSmeMibConfigSetReqSer(u8 *ptr, size_t *len, void *msg);
-extern void* CsrWifiSmeMibConfigSetReqDes(u8 *buffer, size_t len);
+extern u8 *CsrWifiSmeMibConfigSetReqSer(u8 *ptr, size_t *len, void *msg);
+extern void *CsrWifiSmeMibConfigSetReqDes(u8 *buffer, size_t len);
extern size_t CsrWifiSmeMibConfigSetReqSizeof(void *msg);
#define CsrWifiSmeMibConfigSetReqSerFree CsrWifiSmePfree
-extern u8* CsrWifiSmeMibGetNextReqSer(u8 *ptr, size_t *len, void *msg);
-extern void* CsrWifiSmeMibGetNextReqDes(u8 *buffer, size_t len);
+extern u8 *CsrWifiSmeMibGetNextReqSer(u8 *ptr, size_t *len, void *msg);
+extern void *CsrWifiSmeMibGetNextReqDes(u8 *buffer, size_t len);
extern size_t CsrWifiSmeMibGetNextReqSizeof(void *msg);
extern void CsrWifiSmeMibGetNextReqSerFree(void *msg);
-extern u8* CsrWifiSmeMibGetReqSer(u8 *ptr, size_t *len, void *msg);
-extern void* CsrWifiSmeMibGetReqDes(u8 *buffer, size_t len);
+extern u8 *CsrWifiSmeMibGetReqSer(u8 *ptr, size_t *len, void *msg);
+extern void *CsrWifiSmeMibGetReqDes(u8 *buffer, size_t len);
extern size_t CsrWifiSmeMibGetReqSizeof(void *msg);
extern void CsrWifiSmeMibGetReqSerFree(void *msg);
-extern u8* CsrWifiSmeMibSetReqSer(u8 *ptr, size_t *len, void *msg);
-extern void* CsrWifiSmeMibSetReqDes(u8 *buffer, size_t len);
+extern u8 *CsrWifiSmeMibSetReqSer(u8 *ptr, size_t *len, void *msg);
+extern void *CsrWifiSmeMibSetReqDes(u8 *buffer, size_t len);
extern size_t CsrWifiSmeMibSetReqSizeof(void *msg);
extern void CsrWifiSmeMibSetReqSerFree(void *msg);
-extern u8* CsrWifiSmeMulticastAddressReqSer(u8 *ptr, size_t *len, void *msg);
-extern void* CsrWifiSmeMulticastAddressReqDes(u8 *buffer, size_t len);
+extern u8 *CsrWifiSmeMulticastAddressReqSer(u8 *ptr, size_t *len, void *msg);
+extern void *CsrWifiSmeMulticastAddressReqDes(u8 *buffer, size_t len);
extern size_t CsrWifiSmeMulticastAddressReqSizeof(void *msg);
extern void CsrWifiSmeMulticastAddressReqSerFree(void *msg);
-extern u8* CsrWifiSmePacketFilterSetReqSer(u8 *ptr, size_t *len, void *msg);
-extern void* CsrWifiSmePacketFilterSetReqDes(u8 *buffer, size_t len);
+extern u8 *CsrWifiSmePacketFilterSetReqSer(u8 *ptr, size_t *len, void *msg);
+extern void *CsrWifiSmePacketFilterSetReqDes(u8 *buffer, size_t len);
extern size_t CsrWifiSmePacketFilterSetReqSizeof(void *msg);
extern void CsrWifiSmePacketFilterSetReqSerFree(void *msg);
@@ -172,8 +168,8 @@
#define CsrWifiSmePermanentMacAddressGetReqSizeof CsrWifiEventSizeof
#define CsrWifiSmePermanentMacAddressGetReqSerFree CsrWifiSmePfree
-extern u8* CsrWifiSmePmkidReqSer(u8 *ptr, size_t *len, void *msg);
-extern void* CsrWifiSmePmkidReqDes(u8 *buffer, size_t len);
+extern u8 *CsrWifiSmePmkidReqSer(u8 *ptr, size_t *len, void *msg);
+extern void *CsrWifiSmePmkidReqDes(u8 *buffer, size_t len);
extern size_t CsrWifiSmePmkidReqSizeof(void *msg);
extern void CsrWifiSmePmkidReqSerFree(void *msg);
@@ -182,8 +178,8 @@
#define CsrWifiSmePowerConfigGetReqSizeof CsrWifiEventSizeof
#define CsrWifiSmePowerConfigGetReqSerFree CsrWifiSmePfree
-extern u8* CsrWifiSmePowerConfigSetReqSer(u8 *ptr, size_t *len, void *msg);
-extern void* CsrWifiSmePowerConfigSetReqDes(u8 *buffer, size_t len);
+extern u8 *CsrWifiSmePowerConfigSetReqSer(u8 *ptr, size_t *len, void *msg);
+extern void *CsrWifiSmePowerConfigSetReqDes(u8 *buffer, size_t len);
extern size_t CsrWifiSmePowerConfigSetReqSizeof(void *msg);
#define CsrWifiSmePowerConfigSetReqSerFree CsrWifiSmePfree
@@ -197,8 +193,8 @@
#define CsrWifiSmeRoamingConfigGetReqSizeof CsrWifiEventCsrUint16Sizeof
#define CsrWifiSmeRoamingConfigGetReqSerFree CsrWifiSmePfree
-extern u8* CsrWifiSmeRoamingConfigSetReqSer(u8 *ptr, size_t *len, void *msg);
-extern void* CsrWifiSmeRoamingConfigSetReqDes(u8 *buffer, size_t len);
+extern u8 *CsrWifiSmeRoamingConfigSetReqSer(u8 *ptr, size_t *len, void *msg);
+extern void *CsrWifiSmeRoamingConfigSetReqDes(u8 *buffer, size_t len);
extern size_t CsrWifiSmeRoamingConfigSetReqSizeof(void *msg);
#define CsrWifiSmeRoamingConfigSetReqSerFree CsrWifiSmePfree
@@ -207,13 +203,13 @@
#define CsrWifiSmeScanConfigGetReqSizeof CsrWifiEventSizeof
#define CsrWifiSmeScanConfigGetReqSerFree CsrWifiSmePfree
-extern u8* CsrWifiSmeScanConfigSetReqSer(u8 *ptr, size_t *len, void *msg);
-extern void* CsrWifiSmeScanConfigSetReqDes(u8 *buffer, size_t len);
+extern u8 *CsrWifiSmeScanConfigSetReqSer(u8 *ptr, size_t *len, void *msg);
+extern void *CsrWifiSmeScanConfigSetReqDes(u8 *buffer, size_t len);
extern size_t CsrWifiSmeScanConfigSetReqSizeof(void *msg);
extern void CsrWifiSmeScanConfigSetReqSerFree(void *msg);
-extern u8* CsrWifiSmeScanFullReqSer(u8 *ptr, size_t *len, void *msg);
-extern void* CsrWifiSmeScanFullReqDes(u8 *buffer, size_t len);
+extern u8 *CsrWifiSmeScanFullReqSer(u8 *ptr, size_t *len, void *msg);
+extern void *CsrWifiSmeScanFullReqDes(u8 *buffer, size_t len);
extern size_t CsrWifiSmeScanFullReqSizeof(void *msg);
extern void CsrWifiSmeScanFullReqSerFree(void *msg);
@@ -232,8 +228,8 @@
#define CsrWifiSmeSmeStaConfigGetReqSizeof CsrWifiEventCsrUint16Sizeof
#define CsrWifiSmeSmeStaConfigGetReqSerFree CsrWifiSmePfree
-extern u8* CsrWifiSmeSmeStaConfigSetReqSer(u8 *ptr, size_t *len, void *msg);
-extern void* CsrWifiSmeSmeStaConfigSetReqDes(u8 *buffer, size_t len);
+extern u8 *CsrWifiSmeSmeStaConfigSetReqSer(u8 *ptr, size_t *len, void *msg);
+extern void *CsrWifiSmeSmeStaConfigSetReqDes(u8 *buffer, size_t len);
extern size_t CsrWifiSmeSmeStaConfigSetReqSizeof(void *msg);
#define CsrWifiSmeSmeStaConfigSetReqSerFree CsrWifiSmePfree
@@ -242,8 +238,8 @@
#define CsrWifiSmeStationMacAddressGetReqSizeof CsrWifiEventSizeof
#define CsrWifiSmeStationMacAddressGetReqSerFree CsrWifiSmePfree
-extern u8* CsrWifiSmeTspecReqSer(u8 *ptr, size_t *len, void *msg);
-extern void* CsrWifiSmeTspecReqDes(u8 *buffer, size_t len);
+extern u8 *CsrWifiSmeTspecReqSer(u8 *ptr, size_t *len, void *msg);
+extern void *CsrWifiSmeTspecReqDes(u8 *buffer, size_t len);
extern size_t CsrWifiSmeTspecReqSizeof(void *msg);
extern void CsrWifiSmeTspecReqSerFree(void *msg);
@@ -252,8 +248,8 @@
#define CsrWifiSmeVersionsGetReqSizeof CsrWifiEventSizeof
#define CsrWifiSmeVersionsGetReqSerFree CsrWifiSmePfree
-extern u8* CsrWifiSmeWifiFlightmodeReqSer(u8 *ptr, size_t *len, void *msg);
-extern void* CsrWifiSmeWifiFlightmodeReqDes(u8 *buffer, size_t len);
+extern u8 *CsrWifiSmeWifiFlightmodeReqSer(u8 *ptr, size_t *len, void *msg);
+extern void *CsrWifiSmeWifiFlightmodeReqDes(u8 *buffer, size_t len);
extern size_t CsrWifiSmeWifiFlightmodeReqSizeof(void *msg);
extern void CsrWifiSmeWifiFlightmodeReqSerFree(void *msg);
@@ -262,13 +258,13 @@
#define CsrWifiSmeWifiOffReqSizeof CsrWifiEventSizeof
#define CsrWifiSmeWifiOffReqSerFree CsrWifiSmePfree
-extern u8* CsrWifiSmeWifiOnReqSer(u8 *ptr, size_t *len, void *msg);
-extern void* CsrWifiSmeWifiOnReqDes(u8 *buffer, size_t len);
+extern u8 *CsrWifiSmeWifiOnReqSer(u8 *ptr, size_t *len, void *msg);
+extern void *CsrWifiSmeWifiOnReqDes(u8 *buffer, size_t len);
extern size_t CsrWifiSmeWifiOnReqSizeof(void *msg);
extern void CsrWifiSmeWifiOnReqSerFree(void *msg);
-extern u8* CsrWifiSmeCloakedSsidsSetReqSer(u8 *ptr, size_t *len, void *msg);
-extern void* CsrWifiSmeCloakedSsidsSetReqDes(u8 *buffer, size_t len);
+extern u8 *CsrWifiSmeCloakedSsidsSetReqSer(u8 *ptr, size_t *len, void *msg);
+extern void *CsrWifiSmeCloakedSsidsSetReqDes(u8 *buffer, size_t len);
extern size_t CsrWifiSmeCloakedSsidsSetReqSizeof(void *msg);
extern void CsrWifiSmeCloakedSsidsSetReqSerFree(void *msg);
@@ -282,8 +278,8 @@
#define CsrWifiSmeSmeCommonConfigGetReqSizeof CsrWifiEventSizeof
#define CsrWifiSmeSmeCommonConfigGetReqSerFree CsrWifiSmePfree
-extern u8* CsrWifiSmeSmeCommonConfigSetReqSer(u8 *ptr, size_t *len, void *msg);
-extern void* CsrWifiSmeSmeCommonConfigSetReqDes(u8 *buffer, size_t len);
+extern u8 *CsrWifiSmeSmeCommonConfigSetReqSer(u8 *ptr, size_t *len, void *msg);
+extern void *CsrWifiSmeSmeCommonConfigSetReqDes(u8 *buffer, size_t len);
extern size_t CsrWifiSmeSmeCommonConfigSetReqSizeof(void *msg);
#define CsrWifiSmeSmeCommonConfigSetReqSerFree CsrWifiSmePfree
@@ -292,13 +288,13 @@
#define CsrWifiSmeInterfaceCapabilityGetReqSizeof CsrWifiEventSizeof
#define CsrWifiSmeInterfaceCapabilityGetReqSerFree CsrWifiSmePfree
-extern u8* CsrWifiSmeWpsConfigurationReqSer(u8 *ptr, size_t *len, void *msg);
-extern void* CsrWifiSmeWpsConfigurationReqDes(u8 *buffer, size_t len);
+extern u8 *CsrWifiSmeWpsConfigurationReqSer(u8 *ptr, size_t *len, void *msg);
+extern void *CsrWifiSmeWpsConfigurationReqDes(u8 *buffer, size_t len);
extern size_t CsrWifiSmeWpsConfigurationReqSizeof(void *msg);
extern void CsrWifiSmeWpsConfigurationReqSerFree(void *msg);
-extern u8* CsrWifiSmeSetReqSer(u8 *ptr, size_t *len, void *msg);
-extern void* CsrWifiSmeSetReqDes(u8 *buffer, size_t len);
+extern u8 *CsrWifiSmeSetReqSer(u8 *ptr, size_t *len, void *msg);
+extern void *CsrWifiSmeSetReqDes(u8 *buffer, size_t len);
extern size_t CsrWifiSmeSetReqSizeof(void *msg);
extern void CsrWifiSmeSetReqSerFree(void *msg);
@@ -307,8 +303,8 @@
#define CsrWifiSmeActivateCfmSizeof CsrWifiEventCsrUint16Sizeof
#define CsrWifiSmeActivateCfmSerFree CsrWifiSmePfree
-extern u8* CsrWifiSmeAdhocConfigGetCfmSer(u8 *ptr, size_t *len, void *msg);
-extern void* CsrWifiSmeAdhocConfigGetCfmDes(u8 *buffer, size_t len);
+extern u8 *CsrWifiSmeAdhocConfigGetCfmSer(u8 *ptr, size_t *len, void *msg);
+extern void *CsrWifiSmeAdhocConfigGetCfmDes(u8 *buffer, size_t len);
extern size_t CsrWifiSmeAdhocConfigGetCfmSizeof(void *msg);
#define CsrWifiSmeAdhocConfigGetCfmSerFree CsrWifiSmePfree
@@ -317,23 +313,23 @@
#define CsrWifiSmeAdhocConfigSetCfmSizeof CsrWifiEventCsrUint16Sizeof
#define CsrWifiSmeAdhocConfigSetCfmSerFree CsrWifiSmePfree
-extern u8* CsrWifiSmeAssociationCompleteIndSer(u8 *ptr, size_t *len, void *msg);
-extern void* CsrWifiSmeAssociationCompleteIndDes(u8 *buffer, size_t len);
+extern u8 *CsrWifiSmeAssociationCompleteIndSer(u8 *ptr, size_t *len, void *msg);
+extern void *CsrWifiSmeAssociationCompleteIndDes(u8 *buffer, size_t len);
extern size_t CsrWifiSmeAssociationCompleteIndSizeof(void *msg);
extern void CsrWifiSmeAssociationCompleteIndSerFree(void *msg);
-extern u8* CsrWifiSmeAssociationStartIndSer(u8 *ptr, size_t *len, void *msg);
-extern void* CsrWifiSmeAssociationStartIndDes(u8 *buffer, size_t len);
+extern u8 *CsrWifiSmeAssociationStartIndSer(u8 *ptr, size_t *len, void *msg);
+extern void *CsrWifiSmeAssociationStartIndDes(u8 *buffer, size_t len);
extern size_t CsrWifiSmeAssociationStartIndSizeof(void *msg);
#define CsrWifiSmeAssociationStartIndSerFree CsrWifiSmePfree
-extern u8* CsrWifiSmeBlacklistCfmSer(u8 *ptr, size_t *len, void *msg);
-extern void* CsrWifiSmeBlacklistCfmDes(u8 *buffer, size_t len);
+extern u8 *CsrWifiSmeBlacklistCfmSer(u8 *ptr, size_t *len, void *msg);
+extern void *CsrWifiSmeBlacklistCfmDes(u8 *buffer, size_t len);
extern size_t CsrWifiSmeBlacklistCfmSizeof(void *msg);
extern void CsrWifiSmeBlacklistCfmSerFree(void *msg);
-extern u8* CsrWifiSmeCalibrationDataGetCfmSer(u8 *ptr, size_t *len, void *msg);
-extern void* CsrWifiSmeCalibrationDataGetCfmDes(u8 *buffer, size_t len);
+extern u8 *CsrWifiSmeCalibrationDataGetCfmSer(u8 *ptr, size_t *len, void *msg);
+extern void *CsrWifiSmeCalibrationDataGetCfmDes(u8 *buffer, size_t len);
extern size_t CsrWifiSmeCalibrationDataGetCfmSizeof(void *msg);
extern void CsrWifiSmeCalibrationDataGetCfmSerFree(void *msg);
@@ -342,18 +338,18 @@
#define CsrWifiSmeCalibrationDataSetCfmSizeof CsrWifiEventCsrUint16Sizeof
#define CsrWifiSmeCalibrationDataSetCfmSerFree CsrWifiSmePfree
-extern u8* CsrWifiSmeCcxConfigGetCfmSer(u8 *ptr, size_t *len, void *msg);
-extern void* CsrWifiSmeCcxConfigGetCfmDes(u8 *buffer, size_t len);
+extern u8 *CsrWifiSmeCcxConfigGetCfmSer(u8 *ptr, size_t *len, void *msg);
+extern void *CsrWifiSmeCcxConfigGetCfmDes(u8 *buffer, size_t len);
extern size_t CsrWifiSmeCcxConfigGetCfmSizeof(void *msg);
#define CsrWifiSmeCcxConfigGetCfmSerFree CsrWifiSmePfree
-extern u8* CsrWifiSmeCcxConfigSetCfmSer(u8 *ptr, size_t *len, void *msg);
-extern void* CsrWifiSmeCcxConfigSetCfmDes(u8 *buffer, size_t len);
+extern u8 *CsrWifiSmeCcxConfigSetCfmSer(u8 *ptr, size_t *len, void *msg);
+extern void *CsrWifiSmeCcxConfigSetCfmDes(u8 *buffer, size_t len);
extern size_t CsrWifiSmeCcxConfigSetCfmSizeof(void *msg);
#define CsrWifiSmeCcxConfigSetCfmSerFree CsrWifiSmePfree
-extern u8* CsrWifiSmeCoexConfigGetCfmSer(u8 *ptr, size_t *len, void *msg);
-extern void* CsrWifiSmeCoexConfigGetCfmDes(u8 *buffer, size_t len);
+extern u8 *CsrWifiSmeCoexConfigGetCfmSer(u8 *ptr, size_t *len, void *msg);
+extern void *CsrWifiSmeCoexConfigGetCfmDes(u8 *buffer, size_t len);
extern size_t CsrWifiSmeCoexConfigGetCfmSizeof(void *msg);
#define CsrWifiSmeCoexConfigGetCfmSerFree CsrWifiSmePfree
@@ -362,33 +358,33 @@
#define CsrWifiSmeCoexConfigSetCfmSizeof CsrWifiEventCsrUint16Sizeof
#define CsrWifiSmeCoexConfigSetCfmSerFree CsrWifiSmePfree
-extern u8* CsrWifiSmeCoexInfoGetCfmSer(u8 *ptr, size_t *len, void *msg);
-extern void* CsrWifiSmeCoexInfoGetCfmDes(u8 *buffer, size_t len);
+extern u8 *CsrWifiSmeCoexInfoGetCfmSer(u8 *ptr, size_t *len, void *msg);
+extern void *CsrWifiSmeCoexInfoGetCfmDes(u8 *buffer, size_t len);
extern size_t CsrWifiSmeCoexInfoGetCfmSizeof(void *msg);
#define CsrWifiSmeCoexInfoGetCfmSerFree CsrWifiSmePfree
-extern u8* CsrWifiSmeConnectCfmSer(u8 *ptr, size_t *len, void *msg);
-extern void* CsrWifiSmeConnectCfmDes(u8 *buffer, size_t len);
+extern u8 *CsrWifiSmeConnectCfmSer(u8 *ptr, size_t *len, void *msg);
+extern void *CsrWifiSmeConnectCfmDes(u8 *buffer, size_t len);
extern size_t CsrWifiSmeConnectCfmSizeof(void *msg);
#define CsrWifiSmeConnectCfmSerFree CsrWifiSmePfree
-extern u8* CsrWifiSmeConnectionConfigGetCfmSer(u8 *ptr, size_t *len, void *msg);
-extern void* CsrWifiSmeConnectionConfigGetCfmDes(u8 *buffer, size_t len);
+extern u8 *CsrWifiSmeConnectionConfigGetCfmSer(u8 *ptr, size_t *len, void *msg);
+extern void *CsrWifiSmeConnectionConfigGetCfmDes(u8 *buffer, size_t len);
extern size_t CsrWifiSmeConnectionConfigGetCfmSizeof(void *msg);
extern void CsrWifiSmeConnectionConfigGetCfmSerFree(void *msg);
-extern u8* CsrWifiSmeConnectionInfoGetCfmSer(u8 *ptr, size_t *len, void *msg);
-extern void* CsrWifiSmeConnectionInfoGetCfmDes(u8 *buffer, size_t len);
+extern u8 *CsrWifiSmeConnectionInfoGetCfmSer(u8 *ptr, size_t *len, void *msg);
+extern void *CsrWifiSmeConnectionInfoGetCfmDes(u8 *buffer, size_t len);
extern size_t CsrWifiSmeConnectionInfoGetCfmSizeof(void *msg);
extern void CsrWifiSmeConnectionInfoGetCfmSerFree(void *msg);
-extern u8* CsrWifiSmeConnectionQualityIndSer(u8 *ptr, size_t *len, void *msg);
-extern void* CsrWifiSmeConnectionQualityIndDes(u8 *buffer, size_t len);
+extern u8 *CsrWifiSmeConnectionQualityIndSer(u8 *ptr, size_t *len, void *msg);
+extern void *CsrWifiSmeConnectionQualityIndDes(u8 *buffer, size_t len);
extern size_t CsrWifiSmeConnectionQualityIndSizeof(void *msg);
#define CsrWifiSmeConnectionQualityIndSerFree CsrWifiSmePfree
-extern u8* CsrWifiSmeConnectionStatsGetCfmSer(u8 *ptr, size_t *len, void *msg);
-extern void* CsrWifiSmeConnectionStatsGetCfmDes(u8 *buffer, size_t len);
+extern u8 *CsrWifiSmeConnectionStatsGetCfmSer(u8 *ptr, size_t *len, void *msg);
+extern void *CsrWifiSmeConnectionStatsGetCfmDes(u8 *buffer, size_t len);
extern size_t CsrWifiSmeConnectionStatsGetCfmSizeof(void *msg);
#define CsrWifiSmeConnectionStatsGetCfmSerFree CsrWifiSmePfree
@@ -397,8 +393,8 @@
#define CsrWifiSmeDeactivateCfmSizeof CsrWifiEventCsrUint16Sizeof
#define CsrWifiSmeDeactivateCfmSerFree CsrWifiSmePfree
-extern u8* CsrWifiSmeDisconnectCfmSer(u8 *ptr, size_t *len, void *msg);
-extern void* CsrWifiSmeDisconnectCfmDes(u8 *buffer, size_t len);
+extern u8 *CsrWifiSmeDisconnectCfmSer(u8 *ptr, size_t *len, void *msg);
+extern void *CsrWifiSmeDisconnectCfmDes(u8 *buffer, size_t len);
extern size_t CsrWifiSmeDisconnectCfmSizeof(void *msg);
#define CsrWifiSmeDisconnectCfmSerFree CsrWifiSmePfree
@@ -407,38 +403,38 @@
#define CsrWifiSmeEventMaskSetCfmSizeof CsrWifiEventCsrUint16Sizeof
#define CsrWifiSmeEventMaskSetCfmSerFree CsrWifiSmePfree
-extern u8* CsrWifiSmeHostConfigGetCfmSer(u8 *ptr, size_t *len, void *msg);
-extern void* CsrWifiSmeHostConfigGetCfmDes(u8 *buffer, size_t len);
+extern u8 *CsrWifiSmeHostConfigGetCfmSer(u8 *ptr, size_t *len, void *msg);
+extern void *CsrWifiSmeHostConfigGetCfmDes(u8 *buffer, size_t len);
extern size_t CsrWifiSmeHostConfigGetCfmSizeof(void *msg);
#define CsrWifiSmeHostConfigGetCfmSerFree CsrWifiSmePfree
-extern u8* CsrWifiSmeHostConfigSetCfmSer(u8 *ptr, size_t *len, void *msg);
-extern void* CsrWifiSmeHostConfigSetCfmDes(u8 *buffer, size_t len);
+extern u8 *CsrWifiSmeHostConfigSetCfmSer(u8 *ptr, size_t *len, void *msg);
+extern void *CsrWifiSmeHostConfigSetCfmDes(u8 *buffer, size_t len);
extern size_t CsrWifiSmeHostConfigSetCfmSizeof(void *msg);
#define CsrWifiSmeHostConfigSetCfmSerFree CsrWifiSmePfree
-extern u8* CsrWifiSmeIbssStationIndSer(u8 *ptr, size_t *len, void *msg);
-extern void* CsrWifiSmeIbssStationIndDes(u8 *buffer, size_t len);
+extern u8 *CsrWifiSmeIbssStationIndSer(u8 *ptr, size_t *len, void *msg);
+extern void *CsrWifiSmeIbssStationIndDes(u8 *buffer, size_t len);
extern size_t CsrWifiSmeIbssStationIndSizeof(void *msg);
#define CsrWifiSmeIbssStationIndSerFree CsrWifiSmePfree
-extern u8* CsrWifiSmeKeyCfmSer(u8 *ptr, size_t *len, void *msg);
-extern void* CsrWifiSmeKeyCfmDes(u8 *buffer, size_t len);
+extern u8 *CsrWifiSmeKeyCfmSer(u8 *ptr, size_t *len, void *msg);
+extern void *CsrWifiSmeKeyCfmDes(u8 *buffer, size_t len);
extern size_t CsrWifiSmeKeyCfmSizeof(void *msg);
#define CsrWifiSmeKeyCfmSerFree CsrWifiSmePfree
-extern u8* CsrWifiSmeLinkQualityGetCfmSer(u8 *ptr, size_t *len, void *msg);
-extern void* CsrWifiSmeLinkQualityGetCfmDes(u8 *buffer, size_t len);
+extern u8 *CsrWifiSmeLinkQualityGetCfmSer(u8 *ptr, size_t *len, void *msg);
+extern void *CsrWifiSmeLinkQualityGetCfmDes(u8 *buffer, size_t len);
extern size_t CsrWifiSmeLinkQualityGetCfmSizeof(void *msg);
#define CsrWifiSmeLinkQualityGetCfmSerFree CsrWifiSmePfree
-extern u8* CsrWifiSmeMediaStatusIndSer(u8 *ptr, size_t *len, void *msg);
-extern void* CsrWifiSmeMediaStatusIndDes(u8 *buffer, size_t len);
+extern u8 *CsrWifiSmeMediaStatusIndSer(u8 *ptr, size_t *len, void *msg);
+extern void *CsrWifiSmeMediaStatusIndDes(u8 *buffer, size_t len);
extern size_t CsrWifiSmeMediaStatusIndSizeof(void *msg);
extern void CsrWifiSmeMediaStatusIndSerFree(void *msg);
-extern u8* CsrWifiSmeMibConfigGetCfmSer(u8 *ptr, size_t *len, void *msg);
-extern void* CsrWifiSmeMibConfigGetCfmDes(u8 *buffer, size_t len);
+extern u8 *CsrWifiSmeMibConfigGetCfmSer(u8 *ptr, size_t *len, void *msg);
+extern void *CsrWifiSmeMibConfigGetCfmDes(u8 *buffer, size_t len);
extern size_t CsrWifiSmeMibConfigGetCfmSizeof(void *msg);
#define CsrWifiSmeMibConfigGetCfmSerFree CsrWifiSmePfree
@@ -447,13 +443,13 @@
#define CsrWifiSmeMibConfigSetCfmSizeof CsrWifiEventCsrUint16Sizeof
#define CsrWifiSmeMibConfigSetCfmSerFree CsrWifiSmePfree
-extern u8* CsrWifiSmeMibGetCfmSer(u8 *ptr, size_t *len, void *msg);
-extern void* CsrWifiSmeMibGetCfmDes(u8 *buffer, size_t len);
+extern u8 *CsrWifiSmeMibGetCfmSer(u8 *ptr, size_t *len, void *msg);
+extern void *CsrWifiSmeMibGetCfmDes(u8 *buffer, size_t len);
extern size_t CsrWifiSmeMibGetCfmSizeof(void *msg);
extern void CsrWifiSmeMibGetCfmSerFree(void *msg);
-extern u8* CsrWifiSmeMibGetNextCfmSer(u8 *ptr, size_t *len, void *msg);
-extern void* CsrWifiSmeMibGetNextCfmDes(u8 *buffer, size_t len);
+extern u8 *CsrWifiSmeMibGetNextCfmSer(u8 *ptr, size_t *len, void *msg);
+extern void *CsrWifiSmeMibGetNextCfmDes(u8 *buffer, size_t len);
extern size_t CsrWifiSmeMibGetNextCfmSizeof(void *msg);
extern void CsrWifiSmeMibGetNextCfmSerFree(void *msg);
@@ -462,38 +458,39 @@
#define CsrWifiSmeMibSetCfmSizeof CsrWifiEventCsrUint16Sizeof
#define CsrWifiSmeMibSetCfmSerFree CsrWifiSmePfree
-extern u8* CsrWifiSmeMicFailureIndSer(u8 *ptr, size_t *len, void *msg);
-extern void* CsrWifiSmeMicFailureIndDes(u8 *buffer, size_t len);
+extern u8 *CsrWifiSmeMicFailureIndSer(u8 *ptr, size_t *len, void *msg);
+extern void *CsrWifiSmeMicFailureIndDes(u8 *buffer, size_t len);
extern size_t CsrWifiSmeMicFailureIndSizeof(void *msg);
#define CsrWifiSmeMicFailureIndSerFree CsrWifiSmePfree
-extern u8* CsrWifiSmeMulticastAddressCfmSer(u8 *ptr, size_t *len, void *msg);
-extern void* CsrWifiSmeMulticastAddressCfmDes(u8 *buffer, size_t len);
+extern u8 *CsrWifiSmeMulticastAddressCfmSer(u8 *ptr, size_t *len, void *msg);
+extern void *CsrWifiSmeMulticastAddressCfmDes(u8 *buffer, size_t len);
extern size_t CsrWifiSmeMulticastAddressCfmSizeof(void *msg);
extern void CsrWifiSmeMulticastAddressCfmSerFree(void *msg);
-extern u8* CsrWifiSmePacketFilterSetCfmSer(u8 *ptr, size_t *len, void *msg);
-extern void* CsrWifiSmePacketFilterSetCfmDes(u8 *buffer, size_t len);
+extern u8 *CsrWifiSmePacketFilterSetCfmSer(u8 *ptr, size_t *len, void *msg);
+extern void *CsrWifiSmePacketFilterSetCfmDes(u8 *buffer, size_t len);
extern size_t CsrWifiSmePacketFilterSetCfmSizeof(void *msg);
#define CsrWifiSmePacketFilterSetCfmSerFree CsrWifiSmePfree
-extern u8* CsrWifiSmePermanentMacAddressGetCfmSer(u8 *ptr, size_t *len, void *msg);
-extern void* CsrWifiSmePermanentMacAddressGetCfmDes(u8 *buffer, size_t len);
+extern u8 *CsrWifiSmePermanentMacAddressGetCfmSer(u8 *ptr, size_t *len,
+ void *msg);
+extern void *CsrWifiSmePermanentMacAddressGetCfmDes(u8 *buffer, size_t len);
extern size_t CsrWifiSmePermanentMacAddressGetCfmSizeof(void *msg);
#define CsrWifiSmePermanentMacAddressGetCfmSerFree CsrWifiSmePfree
-extern u8* CsrWifiSmePmkidCandidateListIndSer(u8 *ptr, size_t *len, void *msg);
-extern void* CsrWifiSmePmkidCandidateListIndDes(u8 *buffer, size_t len);
+extern u8 *CsrWifiSmePmkidCandidateListIndSer(u8 *ptr, size_t *len, void *msg);
+extern void *CsrWifiSmePmkidCandidateListIndDes(u8 *buffer, size_t len);
extern size_t CsrWifiSmePmkidCandidateListIndSizeof(void *msg);
extern void CsrWifiSmePmkidCandidateListIndSerFree(void *msg);
-extern u8* CsrWifiSmePmkidCfmSer(u8 *ptr, size_t *len, void *msg);
-extern void* CsrWifiSmePmkidCfmDes(u8 *buffer, size_t len);
+extern u8 *CsrWifiSmePmkidCfmSer(u8 *ptr, size_t *len, void *msg);
+extern void *CsrWifiSmePmkidCfmDes(u8 *buffer, size_t len);
extern size_t CsrWifiSmePmkidCfmSizeof(void *msg);
extern void CsrWifiSmePmkidCfmSerFree(void *msg);
-extern u8* CsrWifiSmePowerConfigGetCfmSer(u8 *ptr, size_t *len, void *msg);
-extern void* CsrWifiSmePowerConfigGetCfmDes(u8 *buffer, size_t len);
+extern u8 *CsrWifiSmePowerConfigGetCfmSer(u8 *ptr, size_t *len, void *msg);
+extern void *CsrWifiSmePowerConfigGetCfmDes(u8 *buffer, size_t len);
extern size_t CsrWifiSmePowerConfigGetCfmSizeof(void *msg);
#define CsrWifiSmePowerConfigGetCfmSerFree CsrWifiSmePfree
@@ -502,33 +499,34 @@
#define CsrWifiSmePowerConfigSetCfmSizeof CsrWifiEventCsrUint16Sizeof
#define CsrWifiSmePowerConfigSetCfmSerFree CsrWifiSmePfree
-extern u8* CsrWifiSmeRegulatoryDomainInfoGetCfmSer(u8 *ptr, size_t *len, void *msg);
-extern void* CsrWifiSmeRegulatoryDomainInfoGetCfmDes(u8 *buffer, size_t len);
+extern u8 *CsrWifiSmeRegulatoryDomainInfoGetCfmSer(u8 *ptr, size_t *len,
+ void *msg);
+extern void *CsrWifiSmeRegulatoryDomainInfoGetCfmDes(u8 *buffer, size_t len);
extern size_t CsrWifiSmeRegulatoryDomainInfoGetCfmSizeof(void *msg);
#define CsrWifiSmeRegulatoryDomainInfoGetCfmSerFree CsrWifiSmePfree
-extern u8* CsrWifiSmeRoamCompleteIndSer(u8 *ptr, size_t *len, void *msg);
-extern void* CsrWifiSmeRoamCompleteIndDes(u8 *buffer, size_t len);
+extern u8 *CsrWifiSmeRoamCompleteIndSer(u8 *ptr, size_t *len, void *msg);
+extern void *CsrWifiSmeRoamCompleteIndDes(u8 *buffer, size_t len);
extern size_t CsrWifiSmeRoamCompleteIndSizeof(void *msg);
#define CsrWifiSmeRoamCompleteIndSerFree CsrWifiSmePfree
-extern u8* CsrWifiSmeRoamStartIndSer(u8 *ptr, size_t *len, void *msg);
-extern void* CsrWifiSmeRoamStartIndDes(u8 *buffer, size_t len);
+extern u8 *CsrWifiSmeRoamStartIndSer(u8 *ptr, size_t *len, void *msg);
+extern void *CsrWifiSmeRoamStartIndDes(u8 *buffer, size_t len);
extern size_t CsrWifiSmeRoamStartIndSizeof(void *msg);
#define CsrWifiSmeRoamStartIndSerFree CsrWifiSmePfree
-extern u8* CsrWifiSmeRoamingConfigGetCfmSer(u8 *ptr, size_t *len, void *msg);
-extern void* CsrWifiSmeRoamingConfigGetCfmDes(u8 *buffer, size_t len);
+extern u8 *CsrWifiSmeRoamingConfigGetCfmSer(u8 *ptr, size_t *len, void *msg);
+extern void *CsrWifiSmeRoamingConfigGetCfmDes(u8 *buffer, size_t len);
extern size_t CsrWifiSmeRoamingConfigGetCfmSizeof(void *msg);
#define CsrWifiSmeRoamingConfigGetCfmSerFree CsrWifiSmePfree
-extern u8* CsrWifiSmeRoamingConfigSetCfmSer(u8 *ptr, size_t *len, void *msg);
-extern void* CsrWifiSmeRoamingConfigSetCfmDes(u8 *buffer, size_t len);
+extern u8 *CsrWifiSmeRoamingConfigSetCfmSer(u8 *ptr, size_t *len, void *msg);
+extern void *CsrWifiSmeRoamingConfigSetCfmDes(u8 *buffer, size_t len);
extern size_t CsrWifiSmeRoamingConfigSetCfmSizeof(void *msg);
#define CsrWifiSmeRoamingConfigSetCfmSerFree CsrWifiSmePfree
-extern u8* CsrWifiSmeScanConfigGetCfmSer(u8 *ptr, size_t *len, void *msg);
-extern void* CsrWifiSmeScanConfigGetCfmDes(u8 *buffer, size_t len);
+extern u8 *CsrWifiSmeScanConfigGetCfmSer(u8 *ptr, size_t *len, void *msg);
+extern void *CsrWifiSmeScanConfigGetCfmDes(u8 *buffer, size_t len);
extern size_t CsrWifiSmeScanConfigGetCfmSizeof(void *msg);
extern void CsrWifiSmeScanConfigGetCfmSerFree(void *msg);
@@ -542,8 +540,8 @@
#define CsrWifiSmeScanFullCfmSizeof CsrWifiEventCsrUint16Sizeof
#define CsrWifiSmeScanFullCfmSerFree CsrWifiSmePfree
-extern u8* CsrWifiSmeScanResultIndSer(u8 *ptr, size_t *len, void *msg);
-extern void* CsrWifiSmeScanResultIndDes(u8 *buffer, size_t len);
+extern u8 *CsrWifiSmeScanResultIndSer(u8 *ptr, size_t *len, void *msg);
+extern void *CsrWifiSmeScanResultIndDes(u8 *buffer, size_t len);
extern size_t CsrWifiSmeScanResultIndSizeof(void *msg);
extern void CsrWifiSmeScanResultIndSerFree(void *msg);
@@ -552,38 +550,39 @@
#define CsrWifiSmeScanResultsFlushCfmSizeof CsrWifiEventCsrUint16Sizeof
#define CsrWifiSmeScanResultsFlushCfmSerFree CsrWifiSmePfree
-extern u8* CsrWifiSmeScanResultsGetCfmSer(u8 *ptr, size_t *len, void *msg);
-extern void* CsrWifiSmeScanResultsGetCfmDes(u8 *buffer, size_t len);
+extern u8 *CsrWifiSmeScanResultsGetCfmSer(u8 *ptr, size_t *len, void *msg);
+extern void *CsrWifiSmeScanResultsGetCfmDes(u8 *buffer, size_t len);
extern size_t CsrWifiSmeScanResultsGetCfmSizeof(void *msg);
extern void CsrWifiSmeScanResultsGetCfmSerFree(void *msg);
-extern u8* CsrWifiSmeSmeStaConfigGetCfmSer(u8 *ptr, size_t *len, void *msg);
-extern void* CsrWifiSmeSmeStaConfigGetCfmDes(u8 *buffer, size_t len);
+extern u8 *CsrWifiSmeSmeStaConfigGetCfmSer(u8 *ptr, size_t *len, void *msg);
+extern void *CsrWifiSmeSmeStaConfigGetCfmDes(u8 *buffer, size_t len);
extern size_t CsrWifiSmeSmeStaConfigGetCfmSizeof(void *msg);
#define CsrWifiSmeSmeStaConfigGetCfmSerFree CsrWifiSmePfree
-extern u8* CsrWifiSmeSmeStaConfigSetCfmSer(u8 *ptr, size_t *len, void *msg);
-extern void* CsrWifiSmeSmeStaConfigSetCfmDes(u8 *buffer, size_t len);
+extern u8 *CsrWifiSmeSmeStaConfigSetCfmSer(u8 *ptr, size_t *len, void *msg);
+extern void *CsrWifiSmeSmeStaConfigSetCfmDes(u8 *buffer, size_t len);
extern size_t CsrWifiSmeSmeStaConfigSetCfmSizeof(void *msg);
#define CsrWifiSmeSmeStaConfigSetCfmSerFree CsrWifiSmePfree
-extern u8* CsrWifiSmeStationMacAddressGetCfmSer(u8 *ptr, size_t *len, void *msg);
-extern void* CsrWifiSmeStationMacAddressGetCfmDes(u8 *buffer, size_t len);
+extern u8 *CsrWifiSmeStationMacAddressGetCfmSer(u8 *ptr, size_t *len,
+ void *msg);
+extern void *CsrWifiSmeStationMacAddressGetCfmDes(u8 *buffer, size_t len);
extern size_t CsrWifiSmeStationMacAddressGetCfmSizeof(void *msg);
#define CsrWifiSmeStationMacAddressGetCfmSerFree CsrWifiSmePfree
-extern u8* CsrWifiSmeTspecIndSer(u8 *ptr, size_t *len, void *msg);
-extern void* CsrWifiSmeTspecIndDes(u8 *buffer, size_t len);
+extern u8 *CsrWifiSmeTspecIndSer(u8 *ptr, size_t *len, void *msg);
+extern void *CsrWifiSmeTspecIndDes(u8 *buffer, size_t len);
extern size_t CsrWifiSmeTspecIndSizeof(void *msg);
extern void CsrWifiSmeTspecIndSerFree(void *msg);
-extern u8* CsrWifiSmeTspecCfmSer(u8 *ptr, size_t *len, void *msg);
-extern void* CsrWifiSmeTspecCfmDes(u8 *buffer, size_t len);
+extern u8 *CsrWifiSmeTspecCfmSer(u8 *ptr, size_t *len, void *msg);
+extern void *CsrWifiSmeTspecCfmDes(u8 *buffer, size_t len);
extern size_t CsrWifiSmeTspecCfmSizeof(void *msg);
extern void CsrWifiSmeTspecCfmSerFree(void *msg);
-extern u8* CsrWifiSmeVersionsGetCfmSer(u8 *ptr, size_t *len, void *msg);
-extern void* CsrWifiSmeVersionsGetCfmDes(u8 *buffer, size_t len);
+extern u8 *CsrWifiSmeVersionsGetCfmSer(u8 *ptr, size_t *len, void *msg);
+extern void *CsrWifiSmeVersionsGetCfmDes(u8 *buffer, size_t len);
extern size_t CsrWifiSmeVersionsGetCfmSizeof(void *msg);
extern void CsrWifiSmeVersionsGetCfmSerFree(void *msg);
@@ -612,18 +611,18 @@
#define CsrWifiSmeCloakedSsidsSetCfmSizeof CsrWifiEventCsrUint16Sizeof
#define CsrWifiSmeCloakedSsidsSetCfmSerFree CsrWifiSmePfree
-extern u8* CsrWifiSmeCloakedSsidsGetCfmSer(u8 *ptr, size_t *len, void *msg);
-extern void* CsrWifiSmeCloakedSsidsGetCfmDes(u8 *buffer, size_t len);
+extern u8 *CsrWifiSmeCloakedSsidsGetCfmSer(u8 *ptr, size_t *len, void *msg);
+extern void *CsrWifiSmeCloakedSsidsGetCfmDes(u8 *buffer, size_t len);
extern size_t CsrWifiSmeCloakedSsidsGetCfmSizeof(void *msg);
extern void CsrWifiSmeCloakedSsidsGetCfmSerFree(void *msg);
-extern u8* CsrWifiSmeWifiOnIndSer(u8 *ptr, size_t *len, void *msg);
-extern void* CsrWifiSmeWifiOnIndDes(u8 *buffer, size_t len);
+extern u8 *CsrWifiSmeWifiOnIndSer(u8 *ptr, size_t *len, void *msg);
+extern void *CsrWifiSmeWifiOnIndDes(u8 *buffer, size_t len);
extern size_t CsrWifiSmeWifiOnIndSizeof(void *msg);
#define CsrWifiSmeWifiOnIndSerFree CsrWifiSmePfree
-extern u8* CsrWifiSmeSmeCommonConfigGetCfmSer(u8 *ptr, size_t *len, void *msg);
-extern void* CsrWifiSmeSmeCommonConfigGetCfmDes(u8 *buffer, size_t len);
+extern u8 *CsrWifiSmeSmeCommonConfigGetCfmSer(u8 *ptr, size_t *len, void *msg);
+extern void *CsrWifiSmeSmeCommonConfigGetCfmDes(u8 *buffer, size_t len);
extern size_t CsrWifiSmeSmeCommonConfigGetCfmSizeof(void *msg);
#define CsrWifiSmeSmeCommonConfigGetCfmSerFree CsrWifiSmePfree
@@ -632,23 +631,24 @@
#define CsrWifiSmeSmeCommonConfigSetCfmSizeof CsrWifiEventCsrUint16Sizeof
#define CsrWifiSmeSmeCommonConfigSetCfmSerFree CsrWifiSmePfree
-extern u8* CsrWifiSmeInterfaceCapabilityGetCfmSer(u8 *ptr, size_t *len, void *msg);
-extern void* CsrWifiSmeInterfaceCapabilityGetCfmDes(u8 *buffer, size_t len);
+extern u8 *CsrWifiSmeInterfaceCapabilityGetCfmSer(u8 *ptr, size_t *len,
+ void *msg);
+extern void *CsrWifiSmeInterfaceCapabilityGetCfmDes(u8 *buffer, size_t len);
extern size_t CsrWifiSmeInterfaceCapabilityGetCfmSizeof(void *msg);
#define CsrWifiSmeInterfaceCapabilityGetCfmSerFree CsrWifiSmePfree
-extern u8* CsrWifiSmeErrorIndSer(u8 *ptr, size_t *len, void *msg);
-extern void* CsrWifiSmeErrorIndDes(u8 *buffer, size_t len);
+extern u8 *CsrWifiSmeErrorIndSer(u8 *ptr, size_t *len, void *msg);
+extern void *CsrWifiSmeErrorIndDes(u8 *buffer, size_t len);
extern size_t CsrWifiSmeErrorIndSizeof(void *msg);
extern void CsrWifiSmeErrorIndSerFree(void *msg);
-extern u8* CsrWifiSmeInfoIndSer(u8 *ptr, size_t *len, void *msg);
-extern void* CsrWifiSmeInfoIndDes(u8 *buffer, size_t len);
+extern u8 *CsrWifiSmeInfoIndSer(u8 *ptr, size_t *len, void *msg);
+extern void *CsrWifiSmeInfoIndDes(u8 *buffer, size_t len);
extern size_t CsrWifiSmeInfoIndSizeof(void *msg);
extern void CsrWifiSmeInfoIndSerFree(void *msg);
-extern u8* CsrWifiSmeCoreDumpIndSer(u8 *ptr, size_t *len, void *msg);
-extern void* CsrWifiSmeCoreDumpIndDes(u8 *buffer, size_t len);
+extern u8 *CsrWifiSmeCoreDumpIndSer(u8 *ptr, size_t *len, void *msg);
+extern void *CsrWifiSmeCoreDumpIndDes(u8 *buffer, size_t len);
extern size_t CsrWifiSmeCoreDumpIndSizeof(void *msg);
extern void CsrWifiSmeCoreDumpIndSerFree(void *msg);
@@ -662,9 +662,5 @@
#define CsrWifiSmeWpsConfigurationCfmSizeof CsrWifiEventCsrUint16Sizeof
#define CsrWifiSmeWpsConfigurationCfmSerFree CsrWifiSmePfree
-
-#ifdef __cplusplus
-}
-#endif
#endif /* CSR_WIFI_SME_SERIALIZE_H__ */
diff --git a/drivers/staging/csr/csr_wifi_sme_task.h b/drivers/staging/csr/csr_wifi_sme_task.h
index 0f725e4..1e938c1 100644
--- a/drivers/staging/csr/csr_wifi_sme_task.h
+++ b/drivers/staging/csr/csr_wifi_sme_task.h
@@ -1,10 +1,10 @@
/*****************************************************************************
- (c) Cambridge Silicon Radio Limited 2011
- All rights reserved and confidential information of CSR
+ (c) Cambridge Silicon Radio Limited 2011
+ All rights reserved and confidential information of CSR
- Refer to LICENSE.txt included with this source for details
- on the license terms.
+ Refer to LICENSE.txt included with this source for details
+ on the license terms.
*****************************************************************************/
@@ -15,19 +15,11 @@
#include "csr_sched.h"
-#ifdef __cplusplus
-extern "C" {
-#endif
-
#define CSR_WIFI_SME_LOG_ID 0x1202FFFF
extern CsrSchedQid CSR_WIFI_SME_IFACEQUEUE;
void CsrWifiSmeInit(void **gash);
void CsrWifiSmeDeinit(void **gash);
void CsrWifiSmeHandler(void **gash);
-#ifdef __cplusplus
-}
-#endif
-
#endif /* CSR_WIFI_SME_TASK_H__ */
diff --git a/drivers/staging/csr/csr_wifi_vif_utils.h b/drivers/staging/csr/csr_wifi_vif_utils.h
index 523172d..8ff9788 100644
--- a/drivers/staging/csr/csr_wifi_vif_utils.h
+++ b/drivers/staging/csr/csr_wifi_vif_utils.h
@@ -11,10 +11,6 @@
#ifndef CSR_WIFI_VIF_UTILS_H
#define CSR_WIFI_VIF_UTILS_H
-#ifdef __cplusplus
-extern "C" {
-#endif
-
/* STANDARD INCLUDES ********************************************************/
/* PROJECT INCLUDES *********************************************************/
@@ -27,82 +23,5 @@
#define CSR_WIFI_NUM_INTERFACES (u8)0x1
#define CSR_WIFI_INTERFACE_IN_USE (u16)0x0
-/* This is used at places where interface Id isn't available*/
-#define CSR_WIFI_INTERFACE_ZERO 0
-#define CSR_WIFI_INTERFACE_STA 0
-#define CSR_WIFI_INTERFACE_AMP 0
-
-
-#define CSR_WIFI_VIF_UTILS_UNDEFINED_TAG 0xFFFF
-
-/* Extract the Interface Id from the event */
-#define CsrWifiVifUtilsGetVifTagFromEvent(msg) \
- ((u16) * ((u16 *) ((u8 *) (msg) + sizeof(CsrWifiFsmEvent))))
-
-/* The HPI Vif combines the type and the interface id */
-#define CsrWifiVifUtilsGetVifTagFromHipEvent(msg) \
- ((msg)->virtualInterfaceIdentifier & 0x00FF)
-
-#define CsrWifiVifUtilsPackHipEventVif(type, interfaceId) \
- ((u16)((interfaceId) | ((type) << 8)))
-
-
-/* TYPES DEFINITIONS ********************************************************/
-
-/* GLOBAL VARIABLE DECLARATIONS *********************************************/
-
-/* PUBLIC FUNCTION PROTOTYPES ***********************************************/
-
-/**
- * @brief
- * First checks if the mode is supported capability bitmap of the interface.
- * If this succeeds, then checks if running this mode on this interface is allowed.
- *
- * @param[in] u8 : interface capability bitmap
- * @param[in] u8* : pointer to the array of current interface modes
- * @param[in] u16 : interfaceTag
- * @param[in] CsrWifiInterfaceMode : mode
- *
- * @return
- * u8 : returns true if the interface is allowed to operate in the mode otherwise false.
- */
-extern u8 CsrWifiVifUtilsCheckCompatibility(u8 interfaceCapability,
- u8 *currentInterfaceModes,
- u16 interfaceTag,
- CsrWifiInterfaceMode mode);
-
-/**
- * @brief
- * Checks if the specified interface is supported.
- * NOTE: Only checks that the interface is supported, no checks are made to
- * determine whether a supported interface may be made active.
- *
- * @param[in] u16 : interfaceTag
- *
- * @return
- * u8 : returns true if the interface is supported, otherwise false.
- */
-extern u8 CsrWifiVifUtilsIsSupported(u16 interfaceTag);
-
-#ifdef CSR_LOG_ENABLE
-/**
- * @brief
- * Registers the virtual interface utils logging details.
- * Should only be called once at initialisation.
- *
- * @param[in/out] None
- *
- * @return
- * None
- */
-void CsrWifiVifUtilsLogTextRegister(void);
-#else
-#define CsrWifiVifUtilsLogTextRegister()
-#endif
-
-#ifdef __cplusplus
-}
-#endif
-
#endif /* CSR_WIFI_VIF_UTILS_H */
diff --git a/drivers/staging/csr/data_tx.c b/drivers/staging/csr/data_tx.c
index 8ed7a78..9e3d8b8 100644
--- a/drivers/staging/csr/data_tx.c
+++ b/drivers/staging/csr/data_tx.c
@@ -18,33 +18,30 @@
int
uf_verify_m4(unifi_priv_t *priv, const unsigned char *packet, unsigned int length)
{
- const unsigned char *p = packet;
- u16 keyinfo;
+ const unsigned char *p = packet;
+ u16 keyinfo;
- if (length < (4 + 5 + 8 + 32 + 16 + 8 + 8 + 16 + 1 + 8)) {
- return 1;
- }
+ if (length < (4 + 5 + 8 + 32 + 16 + 8 + 8 + 16 + 1 + 8))
+ return 1;
- p += 8;
- keyinfo = p[5] << 8 | p[6]; /* big-endian */
- if (
- (p[0] == 1 || p[0] == 2) /* protocol version 802.1X-2001 (WPA) or -2004 (WPA2) */ &&
- p[1] == 3 /* EAPOL-Key */ &&
- /* don't bother checking p[2] p[3] (hh ll, packet body length) */
- (p[4] == 254 || p[4] == 2) /* descriptor type P802.1i-D3.0 (WPA) or 802.11i-2004 (WPA2) */ &&
- ((keyinfo & 0x0007) == 1 || (keyinfo & 0x0007) == 2) /* key descriptor version */ &&
- (keyinfo & ~0x0207U) == 0x0108 && /* key info for 4/4 or 4/2 -- ignore key desc version and sec bit (since varies in WPA 4/4) */
- (p[4 + 5 + 8 + 32 + 16 + 8 + 8 + 16 + 0] == 0 && /* key data length (2 octets) 0 for 4/4 only */
- p[4 + 5 + 8 + 32 + 16 + 8 + 8 + 16 + 1] == 0)
- ) {
- unifi_trace(priv, UDBG1, "uf_verify_m4: M4 detected \n");
- return 0;
- }
- else
- {
- return 1;
- }
+ p += 8;
+ keyinfo = p[5] << 8 | p[6]; /* big-endian */
+ if (
+ (p[0] == 1 || p[0] == 2) /* protocol version 802.1X-2001 (WPA) or -2004 (WPA2) */ &&
+ p[1] == 3 /* EAPOL-Key */ &&
+ /* don't bother checking p[2] p[3] (hh ll, packet body length) */
+ (p[4] == 254 || p[4] == 2) /* descriptor type P802.1i-D3.0 (WPA) or 802.11i-2004 (WPA2) */ &&
+ ((keyinfo & 0x0007) == 1 || (keyinfo & 0x0007) == 2) /* key descriptor version */ &&
+ (keyinfo & ~0x0207U) == 0x0108 && /* key info for 4/4 or 4/2 -- ignore key desc version and sec bit (since varies in WPA 4/4) */
+ (p[4 + 5 + 8 + 32 + 16 + 8 + 8 + 16 + 0] == 0 && /* key data length (2 octets) 0 for 4/4 only */
+ p[4 + 5 + 8 + 32 + 16 + 8 + 8 + 16 + 1] == 0)
+ ) {
+ unifi_trace(priv, UDBG1, "uf_verify_m4: M4 detected\n");
+ return 0;
+ } else {
+ return 1;
+ }
}
/*
diff --git a/drivers/staging/csr/drv.c b/drivers/staging/csr/drv.c
index 2497580..4780c32 100644
--- a/drivers/staging/csr/drv.c
+++ b/drivers/staging/csr/drv.c
@@ -166,33 +166,32 @@
static const char*
trace_putest_cmdid(unifi_putest_command_t putest_cmd)
{
- switch (putest_cmd)
- {
- case UNIFI_PUTEST_START:
- return "START";
- case UNIFI_PUTEST_STOP:
- return "STOP";
- case UNIFI_PUTEST_SET_SDIO_CLOCK:
- return "SET CLOCK";
- case UNIFI_PUTEST_CMD52_READ:
- return "CMD52R";
- case UNIFI_PUTEST_CMD52_BLOCK_READ:
- return "CMD52BR";
- case UNIFI_PUTEST_CMD52_WRITE:
- return "CMD52W";
- case UNIFI_PUTEST_DL_FW:
- return "D/L FW";
- case UNIFI_PUTEST_DL_FW_BUFF:
- return "D/L FW BUFFER";
- case UNIFI_PUTEST_COREDUMP_PREPARE:
- return "PREPARE COREDUMP";
- case UNIFI_PUTEST_GP_READ16:
- return "GP16R";
- case UNIFI_PUTEST_GP_WRITE16:
- return "GP16W";
- default:
- return "ERROR: unrecognised command";
- }
+ switch (putest_cmd) {
+ case UNIFI_PUTEST_START:
+ return "START";
+ case UNIFI_PUTEST_STOP:
+ return "STOP";
+ case UNIFI_PUTEST_SET_SDIO_CLOCK:
+ return "SET CLOCK";
+ case UNIFI_PUTEST_CMD52_READ:
+ return "CMD52R";
+ case UNIFI_PUTEST_CMD52_BLOCK_READ:
+ return "CMD52BR";
+ case UNIFI_PUTEST_CMD52_WRITE:
+ return "CMD52W";
+ case UNIFI_PUTEST_DL_FW:
+ return "D/L FW";
+ case UNIFI_PUTEST_DL_FW_BUFF:
+ return "D/L FW BUFFER";
+ case UNIFI_PUTEST_COREDUMP_PREPARE:
+ return "PREPARE COREDUMP";
+ case UNIFI_PUTEST_GP_READ16:
+ return "GP16R";
+ case UNIFI_PUTEST_GP_WRITE16:
+ return "GP16W";
+ default:
+ return "ERROR: unrecognised command";
+ }
}
#ifdef CSR_WIFI_HIP_DEBUG_OFFLINE
@@ -266,8 +265,6 @@
unifi_priv_t *priv;
ul_client_t *udi_cli;
- func_enter();
-
devno = MINOR(inode->i_rdev) >> 1;
/*
@@ -278,7 +275,6 @@
priv = uf_get_instance(devno);
if (priv == NULL) {
unifi_error(NULL, "unifi_open: No device present\n");
- func_exit();
return -ENODEV;
}
@@ -290,7 +286,6 @@
/* Too many clients already using this device */
unifi_error(priv, "Too many clients already open\n");
uf_put_instance(devno);
- func_exit();
return -ENOSPC;
}
unifi_trace(priv, UDBG1, "Client is registered to /dev/unifiudi%d\n", devno);
@@ -310,7 +305,6 @@
uf_put_instance(devno);
unifi_info(priv, "There is already a configuration client using the character device\n");
- func_exit();
return -EBUSY;
}
#endif /* CSR_SME_USERSPACE */
@@ -331,7 +325,6 @@
uf_put_instance(devno);
unifi_error(priv, "Too many clients already open\n");
- func_exit();
return -ENOSPC;
}
@@ -357,7 +350,6 @@
*/
file->private_data = udi_cli;
- func_exit();
return 0;
} /* unifi_open() */
@@ -369,8 +361,6 @@
int devno;
unifi_priv_t *priv;
- func_enter();
-
priv = uf_find_instance(udi_cli->instance);
if (!priv) {
unifi_error(priv, "unifi_close: instance for device not found\n");
@@ -465,8 +455,6 @@
struct list_head *l;
int msglen;
- func_enter();
-
priv = uf_find_instance(pcli->instance);
if (!priv) {
unifi_error(priv, "invalid priv\n");
@@ -527,7 +515,6 @@
/* It is our resposibility to free the message buffer. */
kfree(logptr);
- func_exit_r(msglen);
return msglen;
} /* unifi_read() */
@@ -615,7 +602,6 @@
unifi_net_data_free(priv, &bulk_data.d[i]);
}
}
- func_exit();
return -EIO;
}
@@ -654,8 +640,6 @@
int bytecount;
CsrResult csrResult;
- func_enter();
-
/*
* The signal is the first thing in buf, the signal id is the
* first 16 bits of the signal.
@@ -668,7 +652,6 @@
if ((signal_size <= 0) || (signal_size > buflen)) {
unifi_error(priv, "udi_send_signal_raw - Couldn't find length of signal 0x%x\n",
sig_id);
- func_exit();
return -EINVAL;
}
unifi_trace(priv, UDBG2, "udi_send_signal_raw: signal 0x%.4X len:%d\n",
@@ -713,7 +696,6 @@
if (bytecount > buflen) {
unifi_error(priv, "udi_send_signal_raw: Not enough data (%d instead of %d)\n", buflen, bytecount);
- func_exit();
return -EINVAL;
}
@@ -721,7 +703,6 @@
r = ul_send_signal_raw(priv, buf, signal_size, &data_ptrs);
if (r < 0) {
unifi_error(priv, "udi_send_signal_raw: send failed (%d)\n", r);
- func_exit();
return -EIO;
}
@@ -746,8 +727,6 @@
}
#endif
- func_exit_r(bytecount);
-
return bytecount;
} /* udi_send_signal_raw */
@@ -784,8 +763,6 @@
bulk_data_param_t bulkdata;
CsrResult csrResult;
- func_enter();
-
priv = uf_find_instance(pcli->instance);
if (!priv) {
unifi_error(priv, "invalid priv\n");
@@ -812,7 +789,6 @@
csrResult = unifi_net_data_malloc(priv, &bulkdata.d[0], len);
if (csrResult != CSR_RESULT_SUCCESS) {
unifi_error(priv, "unifi_write: failed to allocate request_data.\n");
- func_exit();
return -ENOMEM;
}
@@ -822,7 +798,6 @@
if (copy_from_user((void*)user_data_buf, p, len)) {
unifi_error(priv, "unifi_write: copy from user failed\n");
unifi_net_data_free(priv, &bulkdata.d[0]);
- func_exit();
return -EFAULT;
}
@@ -838,7 +813,6 @@
unifi_error(priv, "unifi_write - Couldn't find length of signal 0x%x\n",
sig_id);
unifi_net_data_free(priv, &bulkdata.d[0]);
- func_exit();
return -EINVAL;
}
@@ -849,7 +823,6 @@
signal_buf = kmalloc(signal_size, GFP_KERNEL);
if (!signal_buf) {
unifi_net_data_free(priv, &bulkdata.d[0]);
- func_exit();
return -ENOMEM;
}
@@ -948,8 +921,6 @@
kfree(buf);
- func_exit_r(bytes_written);
-
return bytes_written;
} /* unifi_write() */
@@ -1657,8 +1628,6 @@
unsigned int mask = 0;
int ready;
- func_enter();
-
ready = !list_empty(&pcli->udi_log);
poll_wait(filp, &pcli->udi_wq, wait);
@@ -1667,8 +1636,6 @@
mask |= POLLIN | POLLRDNORM; /* readable */
}
- func_exit();
-
return mask;
} /* unifi_poll() */
@@ -1784,8 +1751,6 @@
unsigned long n_1000;
#endif
- func_enter();
-
/* Just a sanity check */
if ((signal == NULL) || (signal_len <= 0)) {
return;
@@ -1901,7 +1866,6 @@
if (down_interruptible(&pcli->udi_sem)) {
printk(KERN_WARNING "udi_log_event_q: Failed to get udi sem\n");
kfree(logptr);
- func_exit();
return;
}
list_add_tail(&logptr->q, &pcli->udi_log);
@@ -1910,7 +1874,6 @@
/* Wake any waiting user process */
wake_up_interruptible(&pcli->udi_wq);
- func_exit();
} /* udi_log_event() */
#ifdef CSR_SME_USERSPACE
@@ -1921,8 +1884,6 @@
udi_msg_t *msgptr;
u8 *p;
- func_enter();
-
/* Just a sanity check */
if ((buffer == NULL) || (length <= 0)) {
return -EINVAL;
@@ -1968,8 +1929,6 @@
/* It is our responsibility to free the buffer allocated in build_packed_*() */
kfree(buffer);
- func_exit();
-
return 0;
} /* uf_sme_queue_message() */
@@ -2059,10 +2018,10 @@
void uf_destroy_device_nodes(unifi_priv_t *priv)
{
- device_destroy(unifi_class, priv->unifiudi_cdev.dev);
- device_destroy(unifi_class, priv->unifi_cdev.dev);
- cdev_del(&priv->unifiudi_cdev);
- cdev_del(&priv->unifi_cdev);
+ device_destroy(unifi_class, priv->unifiudi_cdev.dev);
+ device_destroy(unifi_class, priv->unifi_cdev.dev);
+ cdev_del(&priv->unifiudi_cdev);
+ cdev_del(&priv->unifi_cdev);
}
diff --git a/drivers/staging/csr/firmware.c b/drivers/staging/csr/firmware.c
index b6d8a6e..b42a4d6 100644
--- a/drivers/staging/csr/firmware.c
+++ b/drivers/staging/csr/firmware.c
@@ -62,8 +62,6 @@
unifi_priv_t *priv = (unifi_priv_t*)ospriv;
CSR_UNUSED(info);
- func_enter();
-
if (is_fw == UNIFI_FW_STA) {
/* F/w may have been released after a previous successful download. */
if (priv->fw_sta.dl_data == NULL) {
@@ -72,7 +70,6 @@
}
/* Set up callback struct for readfunc() */
if (priv->fw_sta.dl_data != NULL) {
- func_exit();
return &priv->fw_sta;
}
@@ -80,7 +77,6 @@
unifi_error(priv, "downloading firmware... unknown request: %d\n", is_fw);
}
- func_exit();
return NULL;
} /* unifi_fw_read_start() */
@@ -105,7 +101,6 @@
{
unifi_priv_t *priv = (unifi_priv_t*)ospriv;
struct dlpriv *dl_struct = (struct dlpriv *)dlpriv;
- func_enter();
if (dl_struct != NULL) {
if (dl_struct->dl_data != NULL) {
@@ -115,7 +110,6 @@
uf_release_firmware(priv, dl_struct);
}
- func_exit();
} /* unifi_fw_read_stop() */
@@ -143,17 +137,14 @@
unifi_fw_open_buffer(void *ospriv, void *fwbuf, u32 len)
{
unifi_priv_t *priv = (unifi_priv_t*)ospriv;
- func_enter();
if (fwbuf == NULL) {
- func_exit();
return NULL;
}
priv->fw_conv.dl_data = fwbuf;
priv->fw_conv.dl_len = len;
priv->fw_conv.fw_desc = NULL; /* No OS f/w resource is associated */
- func_exit();
return &priv->fw_conv;
}
@@ -242,8 +233,6 @@
int
uf_run_unifihelper(unifi_priv_t *priv)
{
-#ifdef CONFIG_HOTPLUG
-
#ifdef ANDROID_BUILD
char *prog = "/system/bin/unififw";
#else
@@ -289,10 +278,6 @@
r = call_usermodehelper(argv[0], argv, envp, UMH_WAIT_EXEC);
return r;
-#else
- unifi_trace(priv, UDBG1, "Can't automatically download firmware because kernel does not have HOTPLUG\n");
- return -1;
-#endif
} /* uf_run_unifihelper() */
#ifdef CSR_WIFI_SPLIT_PATCH
diff --git a/drivers/staging/csr/inet.c b/drivers/staging/csr/inet.c
index b4acb54..b3ef818 100644
--- a/drivers/staging/csr/inet.c
+++ b/drivers/staging/csr/inet.c
@@ -93,14 +93,12 @@
void uf_register_inet_notifier(void)
{
- if (atomic_inc_return(&inet_notif_refs) == 1) {
- register_inetaddr_notifier(&uf_inetaddr_notifier);
- }
+ if (atomic_inc_return(&inet_notif_refs) == 1)
+ register_inetaddr_notifier(&uf_inetaddr_notifier);
}
void uf_unregister_inet_notifier(void)
{
- if (atomic_dec_return(&inet_notif_refs) == 0) {
- unregister_inetaddr_notifier(&uf_inetaddr_notifier);
- }
+ if (atomic_dec_return(&inet_notif_refs) == 0)
+ unregister_inetaddr_notifier(&uf_inetaddr_notifier);
}
diff --git a/drivers/staging/csr/io.c b/drivers/staging/csr/io.c
index caf48e3..af9c28f 100644
--- a/drivers/staging/csr/io.c
+++ b/drivers/staging/csr/io.c
@@ -31,7 +31,6 @@
* ---------------------------------------------------------------------------
*/
#include <linux/proc_fs.h>
-#include <linux/version.h>
#include "csr_wifi_hip_unifi.h"
#include "csr_wifi_hip_unifiversion.h"
@@ -86,7 +85,6 @@
static CsrResult signal_buffer_init(unifi_priv_t * priv, int size)
{
int i;
- func_enter();
priv->rxSignalBuffer.writePointer =
priv->rxSignalBuffer.readPointer = 0;
@@ -106,11 +104,9 @@
kfree(priv->rxSignalBuffer.rx_buff[j].bufptr);
priv->rxSignalBuffer.rx_buff[j].bufptr = NULL;
}
- func_exit();
return -1;
}
}
- func_exit();
return 0;
}
@@ -265,8 +261,6 @@
int r = -1;
CsrResult csrResult;
- func_enter();
-
if ((bus_id < 0) || (bus_id >= MAX_UNIFI_DEVS)) {
unifi_error(priv, "register_unifi_sdio: invalid device %d\n",
bus_id);
@@ -415,7 +409,6 @@
up(&Unifi_instance_mutex);
- func_exit();
return priv;
failed4:
@@ -449,7 +442,6 @@
up(&Unifi_instance_mutex);
- func_exit();
return NULL;
} /* register_unifi_sdio() */
@@ -473,7 +465,6 @@
static void
ask_unifi_sdio_cleanup(unifi_priv_t *priv)
{
- func_enter();
/*
* Now clear the flag that says the old instance is in use.
@@ -486,8 +477,6 @@
unifi_trace(NULL, UDBG5, "ask_unifi_sdio_cleanup: wake up cleanup workqueue.\n");
wake_up(&Unifi_cleanup_wq);
- func_exit();
-
} /* ask_unifi_sdio_cleanup() */
@@ -511,8 +500,6 @@
int i;
static const CsrWifiMacAddress broadcast_address = {{0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF}};
- func_enter();
-
/* Remove the device nodes */
uf_destroy_device_nodes(priv);
@@ -604,8 +591,6 @@
unifi_trace(NULL, UDBG5, "cleanup_unifi_sdio: DONE.\n");
- func_exit();
-
} /* cleanup_unifi_sdio() */
@@ -639,7 +624,6 @@
if (priv == NULL) {
unifi_error(priv, "unregister_unifi_sdio: device %d is not registered\n",
bus_id);
- func_exit();
return;
}
@@ -1016,37 +1000,37 @@
static void
uf_sdio_inserted(CsrSdioFunction *sdio_ctx)
{
- unifi_priv_t *priv;
+ unifi_priv_t *priv;
- unifi_trace(NULL, UDBG5, "uf_sdio_inserted(0x%p), slot_id=%d, dev=%p\n",
- sdio_ctx, active_slot, os_devices[active_slot]);
+ unifi_trace(NULL, UDBG5, "uf_sdio_inserted(0x%p), slot_id=%d, dev=%p\n",
+ sdio_ctx, active_slot, os_devices[active_slot]);
- priv = register_unifi_sdio(sdio_ctx, active_slot, os_devices[active_slot]);
- if (priv == NULL) {
- CsrSdioInsertedAcknowledge(sdio_ctx, CSR_RESULT_FAILURE);
- return;
- }
+ priv = register_unifi_sdio(sdio_ctx, active_slot, os_devices[active_slot]);
+ if (priv == NULL) {
+ CsrSdioInsertedAcknowledge(sdio_ctx, CSR_RESULT_FAILURE);
+ return;
+ }
- sdio_ctx->driverData = priv;
+ sdio_ctx->driverData = priv;
- CsrSdioInsertedAcknowledge(sdio_ctx, CSR_RESULT_SUCCESS);
+ CsrSdioInsertedAcknowledge(sdio_ctx, CSR_RESULT_SUCCESS);
} /* uf_sdio_inserted() */
static void
uf_sdio_removed(CsrSdioFunction *sdio_ctx)
{
- unregister_unifi_sdio(active_slot);
- CsrSdioRemovedAcknowledge(sdio_ctx);
+ unregister_unifi_sdio(active_slot);
+ CsrSdioRemovedAcknowledge(sdio_ctx);
} /* uf_sdio_removed() */
static void
uf_sdio_dsr_handler(CsrSdioFunction *sdio_ctx)
{
- unifi_priv_t *priv = sdio_ctx->driverData;
+ unifi_priv_t *priv = sdio_ctx->driverData;
- unifi_sdio_interrupt_handler(priv->card);
+ unifi_sdio_interrupt_handler(priv->card);
} /* uf_sdio_dsr_handler() */
/*
@@ -1068,7 +1052,7 @@
static CsrSdioInterruptDsrCallback
uf_sdio_int_handler(CsrSdioFunction *sdio_ctx)
{
- return uf_sdio_dsr_handler;
+ return uf_sdio_dsr_handler;
} /* uf_sdio_int_handler() */
@@ -1076,18 +1060,18 @@
static CsrSdioFunctionId unifi_ids[] =
{
- {
- .manfId = SDIO_MANF_ID_CSR,
- .cardId = SDIO_CARD_ID_UNIFI_3,
- .sdioFunction = SDIO_WLAN_FUNC_ID_UNIFI_3,
- .sdioInterface = CSR_SDIO_ANY_SDIO_INTERFACE,
- },
- {
- .manfId = SDIO_MANF_ID_CSR,
- .cardId = SDIO_CARD_ID_UNIFI_4,
- .sdioFunction = SDIO_WLAN_FUNC_ID_UNIFI_4,
- .sdioInterface = CSR_SDIO_ANY_SDIO_INTERFACE,
- }
+ {
+ .manfId = SDIO_MANF_ID_CSR,
+ .cardId = SDIO_CARD_ID_UNIFI_3,
+ .sdioFunction = SDIO_WLAN_FUNC_ID_UNIFI_3,
+ .sdioInterface = CSR_SDIO_ANY_SDIO_INTERFACE,
+ },
+ {
+ .manfId = SDIO_MANF_ID_CSR,
+ .cardId = SDIO_CARD_ID_UNIFI_4,
+ .sdioFunction = SDIO_WLAN_FUNC_ID_UNIFI_4,
+ .sdioInterface = CSR_SDIO_ANY_SDIO_INTERFACE,
+ }
};
@@ -1096,14 +1080,14 @@
*/
static CsrSdioFunctionDriver unifi_sdioFunction_drv =
{
- .inserted = uf_sdio_inserted,
- .removed = uf_sdio_removed,
- .intr = uf_sdio_int_handler,
- .suspend = uf_lx_suspend,
- .resume = uf_lx_resume,
+ .inserted = uf_sdio_inserted,
+ .removed = uf_sdio_removed,
+ .intr = uf_sdio_int_handler,
+ .suspend = uf_lx_suspend,
+ .resume = uf_lx_resume,
- .ids = unifi_ids,
- .idsCount = sizeof(unifi_ids) / sizeof(unifi_ids[0])
+ .ids = unifi_ids,
+ .idsCount = sizeof(unifi_ids) / sizeof(unifi_ids[0])
};
@@ -1126,15 +1110,15 @@
int __init
uf_sdio_load(void)
{
- CsrResult csrResult;
+ CsrResult csrResult;
- csrResult = CsrSdioFunctionDriverRegister(&unifi_sdioFunction_drv);
- if (csrResult != CSR_RESULT_SUCCESS) {
- unifi_error(NULL, "Failed to register UniFi SDIO driver: csrResult=%d\n", csrResult);
- return -EIO;
- }
+ csrResult = CsrSdioFunctionDriverRegister(&unifi_sdioFunction_drv);
+ if (csrResult != CSR_RESULT_SUCCESS) {
+ unifi_error(NULL, "Failed to register UniFi SDIO driver: csrResult=%d\n", csrResult);
+ return -EIO;
+ }
- return 0;
+ return 0;
} /* uf_sdio_load() */
@@ -1142,6 +1126,6 @@
void __exit
uf_sdio_unload(void)
{
- CsrSdioFunctionDriverUnregister(&unifi_sdioFunction_drv);
+ CsrSdioFunctionDriverUnregister(&unifi_sdioFunction_drv);
} /* uf_sdio_unload() */
diff --git a/drivers/staging/csr/mlme.c b/drivers/staging/csr/mlme.c
index ed767ecc..861d6b7 100644
--- a/drivers/staging/csr/mlme.c
+++ b/drivers/staging/csr/mlme.c
@@ -154,8 +154,6 @@
{
int r;
- func_enter();
-
if (sig->SignalPrimitiveHeader.SignalId == 0) {
unifi_error(priv, "unifi_mlme_blocking_request: Invalid Signal Id (0x%x)\n",
sig->SignalPrimitiveHeader.SignalId);
@@ -199,7 +197,6 @@
return r;
}
- func_exit();
return 0;
} /* unifi_mlme_blocking_request() */
diff --git a/drivers/staging/csr/monitor.c b/drivers/staging/csr/monitor.c
index 7c524a1..c8e20e4 100644
--- a/drivers/staging/csr/monitor.c
+++ b/drivers/staging/csr/monitor.c
@@ -10,7 +10,6 @@
* ---------------------------------------------------------------------------
*/
-#include <linux/version.h>
#include "unifi_priv.h"
#ifdef UNIFI_SNIFF_ARPHRD
@@ -122,8 +121,6 @@
struct unifi_rx_radiotap_header *unifi_rt;
int signal, noise, snr;
- func_enter();
-
if (ind_data_len <= 0) {
unifi_error(priv, "Invalid length in CSR_MA_SNIFFDATA_INDICATION.\n");
return;
@@ -205,7 +202,6 @@
priv->stats.rx_packets++;
priv->stats.rx_bytes += ind_data_len;
- func_exit();
} /* netrx_radiotap() */
#endif /* RADIOTAP */
@@ -256,8 +252,6 @@
} *avs;
int signal, noise, snr;
- func_enter();
-
if (ind_data_len <= 0) {
unifi_error(priv, "Invalid length in CSR_MA_SNIFFDATA_INDICATION.\n");
return;
@@ -319,7 +313,6 @@
priv->stats.rx_packets++;
priv->stats.rx_bytes += ind_data_len;
- func_exit();
} /* netrx_prism() */
#endif /* PRISM */
@@ -351,11 +344,8 @@
struct net_device *dev = priv->netdev;
struct sk_buff *skb = (struct sk_buff*)bulkdata->d[0].os_net_buf_ptr;
- func_enter();
-
if (bulkdata->d[0].data_length == 0) {
unifi_warning(priv, "rx: MA-SNIFFDATA indication with zero bulk data\n");
- func_exit();
return;
}
diff --git a/drivers/staging/csr/netdev.c b/drivers/staging/csr/netdev.c
index 9a52ab4..7dad26f 100644
--- a/drivers/staging/csr/netdev.c
+++ b/drivers/staging/csr/netdev.c
@@ -47,7 +47,6 @@
#include <linux/etherdevice.h>
#include <linux/mutex.h>
#include <linux/semaphore.h>
-#include <linux/version.h>
#include <linux/vmalloc.h>
#include "csr_wifi_hip_unifi.h"
#include "csr_wifi_hip_conversions.h"
@@ -55,7 +54,7 @@
#include <net/pkt_sched.h>
-/* Wext handler is suported only if CSR_SUPPORT_WEXT is defined */
+/* Wext handler is supported only if CSR_SUPPORT_WEXT is defined */
#ifdef CSR_SUPPORT_WEXT
extern struct iw_handler_def unifi_iw_handler_def;
#endif /* CSR_SUPPORT_WEXT */
@@ -89,7 +88,7 @@
/*
* The driver uses the qdisc interface to buffer and control all
* outgoing traffic. We create a root qdisc, register our qdisc operations
- * and later we create two subsiduary pfifo queues for the uncontrolled
+ * and later we create two subsidiary pfifo queues for the uncontrolled
* and controlled ports.
*
* The network stack delivers all outgoing packets in our enqueue handler.
@@ -478,8 +477,6 @@
int i;
unsigned long flags;
- func_enter();
-
unifi_trace(priv, UDBG1, "uf_free_netdevice\n");
if (!priv) {
@@ -554,7 +551,6 @@
}
}
- func_exit();
return 0;
} /* uf_free_netdevice() */
@@ -578,8 +574,6 @@
netInterface_priv_t *interfacePriv = (netInterface_priv_t *)netdev_priv(dev);
unifi_priv_t *priv = interfacePriv->privPtr;
- func_enter();
-
/* If we haven't finished UniFi initialisation, we can't start */
if (priv->init_progress != UNIFI_INIT_COMPLETED) {
unifi_warning(priv, "%s: unifi not ready, failing net_open\n", __FUNCTION__);
@@ -615,7 +609,6 @@
netif_tx_start_all_queues(dev);
- func_exit();
return 0;
} /* uf_net_open() */
@@ -627,8 +620,6 @@
netInterface_priv_t *interfacePriv = (netInterface_priv_t*)netdev_priv(dev);
unifi_priv_t *priv = interfacePriv->privPtr;
- func_enter();
-
/* Stop sniffing if in Monitor mode */
if (priv->wext_conf.mode == IW_MODE_MONITOR) {
if (priv->card) {
@@ -639,13 +630,10 @@
}
}
}
-#else
- func_enter();
#endif
netif_tx_stop_all_queues(dev);
- func_exit();
return 0;
} /* uf_net_stop() */
@@ -675,7 +663,6 @@
{
CSR_PRIORITY priority = CSR_CONTENTION;
- func_enter();
priority = (CSR_PRIORITY) (skb->priority >> 5);
if (priority == CSR_QOS_UP0) { /* 0 */
@@ -721,7 +708,6 @@
unifi_trace(priv, UDBG5, "Packet priority = %d\n", priority);
- func_exit();
return priority;
}
@@ -750,8 +736,6 @@
u8 interfaceMode = interfacePriv->interfaceMode;
- func_enter();
-
/* Priority Mapping for all the Modes */
switch(interfaceMode)
{
@@ -788,7 +772,6 @@
}
unifi_trace(priv, UDBG5, "priority = %x\n", priority);
- func_exit();
return priority;
}
@@ -816,8 +799,6 @@
int proto;
CSR_PRIORITY priority;
- func_enter();
-
memcpy(&ehdr, skb->data, ETH_HLEN);
proto = ntohs(ehdr.h_proto);
@@ -836,7 +817,6 @@
}
- func_exit();
return (u16)queue;
} /* uf_net_select_queue() */
@@ -1582,7 +1562,7 @@
return -1;
}
- /* RA adrress must contain the immediate destination MAC address that is similiar to
+ /* RA address must contain the immediate destination MAC address that is similar to
* the Address 1 field of 802.11 Mac header here 4 is: (sizeof(framecontrol) + sizeof (durationID))
* which is address 1 field
*/
@@ -1760,8 +1740,6 @@
CSR_PRIORITY priority;
CsrWifiRouterCtrlPortAction port_action;
- func_enter();
-
unifi_trace(priv, UDBG5, "unifi_net_xmit: skb = %x\n", skb);
memcpy(&ehdr, skb->data, ETH_HLEN);
@@ -1805,7 +1783,6 @@
interfacePriv->stats.tx_dropped++;
kfree_skb(skb);
- func_exit();
return NETDEV_TX_OK;
}
@@ -1848,7 +1825,6 @@
/* The skb will have been freed by send_XXX_request() */
- func_exit();
return result;
} /* uf_net_xmit() */
@@ -1877,7 +1853,6 @@
unifi_priv_t *priv = ospriv;
int i; /* used as a loop counter */
- func_enter();
unifi_trace(priv, UDBG2, "Stopping queue %d\n", queue);
for(i=0;i<CSR_WIFI_NUM_INTERFACES;i++)
@@ -1897,7 +1872,6 @@
unifi_error(priv, "Start buffering %d defaulting to 0\n", queue);
}
#endif
- func_exit();
} /* unifi_pause_xmit() */
@@ -1907,7 +1881,6 @@
unifi_priv_t *priv = ospriv;
int i=0; /* used as a loop counter */
- func_enter();
unifi_trace(priv, UDBG2, "Waking queue %d\n", queue);
for(i=0;i<CSR_WIFI_NUM_INTERFACES;i++)
@@ -1927,7 +1900,6 @@
uf_send_buffered_frames(priv,0);
}
#endif
- func_exit();
} /* unifi_restart_xmit() */
@@ -1963,7 +1935,6 @@
priv->interfacePriv[ifTag]->stats.rx_frame_errors++;
unifi_net_data_free(priv, &bulkdata->d[0]);
unifi_notice(priv, "indicate_rx_skb: Discard unknown frame.\n");
- func_exit();
return;
}
@@ -1975,7 +1946,6 @@
unifi_net_data_free(priv, &bulkdata->d[0]);
unifi_trace(priv, UDBG5, "indicate_rx_skb: Data given to subscription"
"API, not being given to kernel\n");
- func_exit();
return;
}
@@ -1998,7 +1968,6 @@
priv->interfacePriv[ifTag]->stats.rx_errors++;
priv->interfacePriv[ifTag]->stats.rx_length_errors++;
unifi_net_data_free(priv, &bulkdata->d[0]);
- func_exit();
return;
}
@@ -2025,7 +1994,6 @@
priv->interfacePriv[ifTag]->stats.rx_packets++;
priv->interfacePriv[ifTag]->stats.rx_bytes += bulkdata->d[0].data_length;
- func_exit();
return;
}
@@ -2178,8 +2146,6 @@
netInterface_priv_t *interfacePriv;
struct ethhdr ehdr;
- func_enter();
-
interfaceTag = (pkt_ind->VirtualInterfaceIdentifier & 0xff);
interfacePriv = priv->interfacePriv[interfaceTag];
@@ -2188,7 +2154,6 @@
{
unifi_error(priv, "%s: MA-PACKET indication with bad interfaceTag %d\n", __FUNCTION__, interfaceTag);
unifi_net_data_free(priv,&bulkdata->d[0]);
- func_exit();
return;
}
@@ -2197,14 +2162,12 @@
{
unifi_error(priv, "%s: MA-PACKET indication with unallocated interfaceTag %d\n", __FUNCTION__, interfaceTag);
unifi_net_data_free(priv, &bulkdata->d[0]);
- func_exit();
return;
}
if (bulkdata->d[0].data_length == 0) {
unifi_warning(priv, "%s: MA-PACKET indication with zero bulk data\n", __FUNCTION__);
unifi_net_data_free(priv,&bulkdata->d[0]);
- func_exit();
return;
}
@@ -2326,7 +2289,6 @@
sa[0], sa[1],sa[2], sa[3], sa[4],sa[5]);
CsrWifiRouterCtrlUnexpectedFrameIndSend(priv->CSR_WIFI_SME_IFACEQUEUE,0,interfaceTag,peerMacAddress);
unifi_net_data_free(priv, &bulkdata->d[0]);
- func_exit();
return;
}
@@ -2343,7 +2305,6 @@
unifi_net_data_free(priv, &bulkdata->d[0]);
unifi_notice(priv, "%s: Dropping packet, proto=0x%04x, %s port\n", __FUNCTION__,
proto, queue ? "Controlled" : "Un-controlled");
- func_exit();
return;
}
@@ -2351,7 +2312,6 @@
if((dataFrameType == QOS_DATA_NULL) || (dataFrameType == DATA_NULL)){
unifi_trace(priv, UDBG5, "%s: Null Frame Received and Freed\n", __FUNCTION__);
unifi_net_data_free(priv, &bulkdata->d[0]);
- func_exit();
return;
}
@@ -2366,7 +2326,6 @@
bulkdata,
macHeaderLengthInBytes)))
{
- func_exit();
return;
}
unifi_trace(priv, UDBG5, "unifi_rx: no specific AP handling process as normal frame, MAC Header len %d\n",macHeaderLengthInBytes);
@@ -2389,7 +2348,6 @@
unifi_trace(priv, UDBG1, "Zero length frame, but not null-data %04x\n", frameControl);
}
unifi_net_data_free(priv, &bulkdata->d[0]);
- func_exit();
return;
}
@@ -2399,7 +2357,6 @@
unifi_net_data_free(priv, &bulkdata->d[0]);
unifi_notice(priv, "%s: Dropping packet, proto=0x%04x, %s port\n",
__FUNCTION__, proto, queue ? "controlled" : "uncontrolled");
- func_exit();
return;
} else if ( (port_action == CSR_WIFI_ROUTER_CTRL_PORT_ACTION_8021X_PORT_CLOSED_BLOCK) ||
(interfacePriv->connected != UnifiConnected) ) {
@@ -2415,7 +2372,6 @@
__FUNCTION__, sizeof(rx_buffered_packets_t));
interfacePriv->stats.rx_dropped++;
unifi_net_data_free(priv, &bulkdata->d[0]);
- func_exit();
return;
}
@@ -2439,15 +2395,12 @@
list_add_tail(&rx_q_item->q, rx_list);
up(&priv->rx_q_sem);
- func_exit();
return;
}
indicate_rx_skb(priv, interfaceTag, da, sa, skb, signal, bulkdata);
- func_exit();
-
} /* unifi_rx() */
static void process_ma_packet_cfm(unifi_priv_t *priv, CSR_SIGNAL *signal, bulk_data_param_t *bulkdata)
@@ -2456,7 +2409,6 @@
const CSR_MA_PACKET_CONFIRM *pkt_cfm = &signal->u.MaPacketConfirm;
netInterface_priv_t *interfacePriv;
- func_enter();
interfaceTag = (pkt_cfm->VirtualInterfaceIdentifier & 0xff);
interfacePriv = priv->interfacePriv[interfaceTag];
@@ -2464,7 +2416,6 @@
if (interfaceTag >= CSR_WIFI_NUM_INTERFACES)
{
unifi_error(priv, "%s: MA-PACKET confirm with bad interfaceTag %d\n", __FUNCTION__, interfaceTag);
- func_exit();
return;
}
#ifdef CSR_SUPPORT_SME
@@ -2487,7 +2438,6 @@
interfacePriv->m4_hostTag = 0xffffffff;
}
#endif
- func_exit();
return;
}
@@ -2528,8 +2478,6 @@
#endif
- func_enter();
-
interfaceTag = (pkt_ind->VirtualInterfaceIdentifier & 0xff);
interfacePriv = priv->interfacePriv[interfaceTag];
@@ -2539,7 +2487,6 @@
{
unifi_error(priv, "%s: MA-PACKET indication with bad interfaceTag %d\n", __FUNCTION__, interfaceTag);
unifi_net_data_free(priv,&bulkdata->d[0]);
- func_exit();
return;
}
@@ -2548,24 +2495,21 @@
{
unifi_error(priv, "%s: MA-PACKET indication with unallocated interfaceTag %d\n", __FUNCTION__, interfaceTag);
unifi_net_data_free(priv, &bulkdata->d[0]);
- func_exit();
return;
}
if (bulkdata->d[0].data_length == 0) {
unifi_warning(priv, "%s: MA-PACKET indication with zero bulk data\n", __FUNCTION__);
unifi_net_data_free(priv,&bulkdata->d[0]);
- func_exit();
return;
}
/* For monitor mode we need to pass this indication to the registered application
- handle this seperately*/
+ handle this separately*/
/* MIC failure is already taken care of so no need to send the PDUs which are not successfully received in non-monitor mode*/
if(pkt_ind->ReceptionStatus != CSR_RX_SUCCESS)
{
unifi_warning(priv, "%s: MA-PACKET indication with status = %d\n",__FUNCTION__, pkt_ind->ReceptionStatus);
unifi_net_data_free(priv,&bulkdata->d[0]);
- func_exit();
return;
}
@@ -2613,13 +2557,11 @@
}
#endif
unifi_net_data_free(priv,&bulkdata->d[0]);
- func_exit();
return;
}
if(frameType != IEEE802_11_FRAMETYPE_DATA) {
unifi_warning(priv, "%s: Non control Non Data frame is received\n",__FUNCTION__);
unifi_net_data_free(priv,&bulkdata->d[0]);
- func_exit();
return;
}
@@ -2637,7 +2579,6 @@
sa[0], sa[1],sa[2], sa[3], sa[4],sa[5]);
CsrWifiRouterCtrlUnexpectedFrameIndSend(priv->CSR_WIFI_SME_IFACEQUEUE,0,interfaceTag,peerMacAddress);
unifi_net_data_free(priv, &bulkdata->d[0]);
- func_exit();
return;
}
@@ -2743,7 +2684,6 @@
up(&priv->ba_mutex);
process_ba_complete(priv, interfacePriv);
- func_exit();
}
/*
* ---------------------------------------------------------------------------
@@ -2836,8 +2776,6 @@
int id, r;
bulk_data_param_t bulkdata;
- func_enter();
-
/* Just a sanity check */
if (sig_packed == NULL) {
return;
@@ -2902,7 +2840,6 @@
break;
}
- func_exit();
} /* netdev_mlme_event_handler() */
@@ -3100,13 +3037,13 @@
u16 gap;
gap = (sn - ba_session->expected_sn) & 0xFFF;
- unifi_trace(priv, UDBG6, "%s: proccess the frames up to new_expected_sn = %d gap = %d\n", __FUNCTION__, sn, gap);
+ unifi_trace(priv, UDBG6, "%s: process the frames up to new_expected_sn = %d gap = %d\n", __FUNCTION__, sn, gap);
for(j = 0; j < gap && j < ba_session->wind_size; j++) {
i = SN_TO_INDEX(ba_session, ba_session->expected_sn);
- unifi_trace(priv, UDBG6, "%s: proccess the slot index = %d\n", __FUNCTION__, i);
+ unifi_trace(priv, UDBG6, "%s: process the slot index = %d\n", __FUNCTION__, i);
if(ba_session->buffer[i].active) {
add_frame_to_ba_complete(priv, interfacePriv, &ba_session->buffer[i]);
- unifi_trace(priv, UDBG6, "%s: proccess the frame at index = %d expected_sn = %d\n", __FUNCTION__, i, ba_session->expected_sn);
+ unifi_trace(priv, UDBG6, "%s: process the frame at index = %d expected_sn = %d\n", __FUNCTION__, i, ba_session->expected_sn);
FREE_BUFFER_SLOT(ba_session, i);
} else {
unifi_trace(priv, UDBG6, "%s: empty slot at index = %d\n", __FUNCTION__, i);
@@ -3247,8 +3184,8 @@
netInterface_priv_t *interfacePriv,
ba_session_rx_struct *ba_session)
{
- CsrTime now;
- CsrTime age;
+ u32 now;
+ u32 age;
u8 i, j;
u16 sn_temp;
@@ -3283,11 +3220,11 @@
if (ba_session->buffer[i].recv_time > now)
{
/* timer wrap */
- age = CsrTimeAdd((CsrTime)CsrTimeSub(CSR_SCHED_TIME_MAX, ba_session->buffer[i].recv_time), now);
+ age = CsrTimeAdd((u32)CsrTimeSub(CSR_SCHED_TIME_MAX, ba_session->buffer[i].recv_time), now);
}
else
{
- age = (CsrTime)CsrTimeSub(now, ba_session->buffer[i].recv_time);
+ age = (u32)CsrTimeSub(now, ba_session->buffer[i].recv_time);
}
if (age >= CSR_WIFI_BA_MPDU_FRAME_AGE_TIMEOUT)
@@ -3331,8 +3268,6 @@
CSR_PRIORITY UserPriority;
CSR_SEQUENCE_NUMBER sn;
- func_enter();
-
interfaceTag = (pkt_err_ind->VirtualInterfaceIdentifier & 0xff);
@@ -3340,7 +3275,6 @@
if (interfaceTag >= CSR_WIFI_NUM_INTERFACES)
{
unifi_error(priv, "%s: MaPacketErrorIndication indication with bad interfaceTag %d\n", __FUNCTION__, interfaceTag);
- func_exit();
return;
}
@@ -3348,7 +3282,6 @@
UserPriority = pkt_err_ind->UserPriority;
if(UserPriority > 15) {
unifi_error(priv, "%s: MaPacketErrorIndication indication with bad UserPriority=%d\n", __FUNCTION__, UserPriority);
- func_exit();
}
sn = pkt_err_ind->SequenceNumber;
@@ -3369,7 +3302,6 @@
up(&priv->ba_mutex);
process_ba_complete(priv, interfacePriv);
- func_exit();
}
diff --git a/drivers/staging/csr/os.c b/drivers/staging/csr/os.c
index 35dc908..37ec59d 100644
--- a/drivers/staging/csr/os.c
+++ b/drivers/staging/csr/os.c
@@ -412,9 +412,8 @@
return;
}
for (i = 0; i < len; i++) {
- if (col == 0) {
+ if (col == 0)
printk("0x%02X: ", i);
- }
printk(" %02X", pdata[i]);
@@ -423,9 +422,8 @@
col = 0;
}
}
- if (col) {
+ if (col)
printk("\n");
- }
} /* dump() */
@@ -438,9 +436,8 @@
printk("timestamp %s \n", print_time());
#endif /* ANDROID_TIMESTAMP */
for (i = 0; i < len; i+=2) {
- if (col == 0) {
+ if (col == 0)
printk("0x%02X: ", i);
- }
printk(" %04X", *p++);
@@ -449,9 +446,8 @@
col = 0;
}
}
- if (col) {
+ if (col)
printk("\n");
- }
}
@@ -459,7 +455,7 @@
void
dump_str(void *mem, u16 len)
{
- int i, col = 0;
+ int i;
unsigned char *pdata = (unsigned char *)mem;
#ifdef ANDROID_TIMESTAMP
printk("timestamp %s \n", print_time());
@@ -467,9 +463,7 @@
for (i = 0; i < len; i++) {
printk("%c", pdata[i]);
}
- if (col) {
- printk("\n");
- }
+ printk("\n");
} /* dump_str() */
#endif /* CSR_ONLY_NOTES */
diff --git a/drivers/staging/csr/sdio_mmc.c b/drivers/staging/csr/sdio_mmc.c
index af3e40b..b6a16de 100644
--- a/drivers/staging/csr/sdio_mmc.c
+++ b/drivers/staging/csr/sdio_mmc.c
@@ -14,7 +14,6 @@
#include <linux/kernel.h>
#include <linux/mutex.h>
#include <linux/gfp.h>
-#include <linux/version.h>
#include <linux/mmc/core.h>
#include <linux/mmc/card.h>
#include <linux/mmc/host.h>
@@ -152,7 +151,6 @@
_sdio_release_host(func);
if (err) {
- func_exit_r(err);
return ConvertSdioToCsrSdioResult(err);
}
@@ -170,7 +168,6 @@
_sdio_release_host(func);
if (err) {
- func_exit_r(err);
return ConvertSdioToCsrSdioResult(err);
}
@@ -246,7 +243,6 @@
_sdio_release_host(func);
if (err) {
- func_exit_r(err);
return ConvertSdioToCsrSdioResult(err);
}
@@ -268,7 +264,6 @@
_sdio_release_host(func);
if (err) {
- func_exit_r(err);
return ConvertSdioToCsrSdioResult(err);
}
@@ -287,7 +282,6 @@
_sdio_release_host(func);
if (err) {
- func_exit_r(err);
return ConvertSdioToCsrSdioResult(err);
}
@@ -305,7 +299,6 @@
_sdio_release_host(func);
if (err) {
- func_exit_r(err);
return ConvertSdioToCsrSdioResult(err);
}
@@ -480,7 +473,6 @@
#endif
_sdio_release_host(func);
- func_exit();
if (err) {
printk(KERN_ERR "unifi: %s: error %d writing IENx\n", __FUNCTION__, err);
return ConvertSdioToCsrSdioResult(err);
@@ -507,7 +499,6 @@
#endif
_sdio_release_host(func);
- func_exit();
if (err) {
printk(KERN_ERR "unifi: %s: error %d writing IENx\n", __FUNCTION__, err);
return ConvertSdioToCsrSdioResult(err);
@@ -541,8 +532,6 @@
struct sdio_func *func = (struct sdio_func *)function->priv;
int err;
- func_enter();
-
/* Enable UniFi function 1 (the 802.11 part). */
_sdio_claim_host(func);
err = sdio_enable_func(func);
@@ -551,7 +540,6 @@
unifi_error(NULL, "Failed to enable SDIO function %d\n", func->num);
}
- func_exit();
return ConvertSdioToCsrSdioResult(err);
} /* CsrSdioFunctionEnable() */
@@ -575,8 +563,6 @@
struct sdio_func *func = (struct sdio_func *)function->priv;
int err;
- func_enter();
-
/* Disable UniFi function 1 (the 802.11 part). */
_sdio_claim_host(func);
err = sdio_disable_func(func);
@@ -585,7 +571,6 @@
unifi_error(NULL, "Failed to disable SDIO function %d\n", func->num);
}
- func_exit();
return ConvertSdioToCsrSdioResult(err);
} /* CsrSdioFunctionDisable() */
@@ -1034,8 +1019,6 @@
int instance;
CsrSdioFunction *sdio_ctx;
- func_enter();
-
/* First of all claim the SDIO driver */
sdio_claim_host(func);
@@ -1103,7 +1086,6 @@
wake_lock(&unifi_sdio_wake_lock);
#endif
- func_exit();
return 0;
} /* uf_glue_sdio_probe() */
@@ -1131,8 +1113,6 @@
return;
}
- func_enter();
-
unifi_info(NULL, "UniFi card removed\n");
/* Clean up the SDIO function driver */
@@ -1148,8 +1128,6 @@
kfree(sdio_ctx);
- func_exit();
-
} /* uf_glue_sdio_remove */
@@ -1183,11 +1161,8 @@
static int
uf_glue_sdio_suspend(struct device *dev)
{
- func_enter();
-
unifi_trace(NULL, UDBG1, "uf_glue_sdio_suspend");
- func_exit();
return 0;
} /* uf_glue_sdio_suspend */
@@ -1208,8 +1183,6 @@
static int
uf_glue_sdio_resume(struct device *dev)
{
- func_enter();
-
unifi_trace(NULL, UDBG1, "uf_glue_sdio_resume");
#ifdef ANDROID_BUILD
@@ -1217,7 +1190,6 @@
wake_lock(&unifi_sdio_wake_lock);
#endif
- func_exit();
return 0;
} /* uf_glue_sdio_resume */
diff --git a/drivers/staging/csr/sme_blocking.c b/drivers/staging/csr/sme_blocking.c
index 543e8f2..d88ccd5 100644
--- a/drivers/staging/csr/sme_blocking.c
+++ b/drivers/staging/csr/sme_blocking.c
@@ -270,17 +270,15 @@
}
r = sme_init_request(priv);
- if (r) {
+ if (r)
return -EIO;
- }
/* Stop the SME */
CsrWifiSmeWifiOffReqSend(0);
r = sme_wait_for_reply(priv, UNIFI_SME_MGT_LONG_TIMEOUT);
- if (r) {
+ if (r)
return r;
- }
unifi_trace(priv, UDBG4,
"sme_mgt_wifi_off: unifi_mgt_wifi_off_req <-- (r=%d, status=%d)\n",
@@ -300,16 +298,14 @@
}
r = sme_init_request(priv);
- if (r) {
+ if (r)
return -EIO;
- }
CsrWifiSmeKeyReqSend(0, CSR_WIFI_INTERFACE_IN_USE, action, *sme_key);
r = sme_wait_for_reply(priv, UNIFI_SME_MGT_SHORT_TIMEOUT);
- if (r) {
+ if (r)
return r;
- }
return convert_sme_error(priv->sme_reply.reply_status);
}
@@ -332,9 +328,8 @@
unifi_trace(priv, UDBG4, "sme_mgt_scan_full: -->\n");
r = sme_init_request(priv);
- if (r) {
+ if (r)
return -EIO;
- }
/* If a channel list is provided, do an active scan */
if (is_active) {
@@ -354,16 +349,14 @@
0, NULL);
r = sme_wait_for_reply(priv, UNIFI_SME_MGT_LONG_TIMEOUT);
- if (r) {
+ if (r)
return r;
- }
unifi_trace(priv, UDBG4, "sme_mgt_scan_full: <-- (status=%d)\n", priv->sme_reply.reply_status);
- if (priv->sme_reply.reply_status == CSR_WIFI_RESULT_UNAVAILABLE) {
+ if (priv->sme_reply.reply_status == CSR_WIFI_RESULT_UNAVAILABLE)
return 0; /* initial scan already underway */
- } else {
+ else
return convert_sme_error(priv->sme_reply.reply_status);
- }
}
@@ -385,15 +378,13 @@
}
r = sme_init_request(priv);
- if (r) {
+ if (r)
return -EIO;
- }
CsrWifiSmeScanResultsGetReqSend(0);
r = sme_wait_for_reply(priv, UNIFI_SME_MGT_LONG_TIMEOUT);
- if (r) {
+ if (r)
return r;
- }
scan_result_list_count = priv->sme_reply.reply_scan_results_count;
scan_result_list = priv->sme_reply.reply_scan_results;
@@ -454,20 +445,17 @@
priv->connection_config.ssid.ssid);
r = sme_init_request(priv);
- if (r) {
+ if (r)
return -EIO;
- }
CsrWifiSmeConnectReqSend(0, CSR_WIFI_INTERFACE_IN_USE, priv->connection_config);
r = sme_wait_for_reply(priv, UNIFI_SME_MGT_SHORT_TIMEOUT);
- if (r) {
+ if (r)
return r;
- }
- if (priv->sme_reply.reply_status) {
+ if (priv->sme_reply.reply_status)
unifi_trace(priv, UDBG1, "sme_mgt_connect: failed with SME status %d\n",
priv->sme_reply.reply_status);
- }
return convert_sme_error(priv->sme_reply.reply_status);
}
@@ -483,15 +471,13 @@
}
r = sme_init_request(priv);
- if (r) {
+ if (r)
return -EIO;
- }
CsrWifiSmeDisconnectReqSend(0, CSR_WIFI_INTERFACE_IN_USE);
r = sme_wait_for_reply(priv, UNIFI_SME_MGT_SHORT_TIMEOUT);
- if (r) {
+ if (r)
return r;
- }
unifi_trace(priv, UDBG4, "sme_mgt_disconnect: <-- (status=%d)\n", priv->sme_reply.reply_status);
return convert_sme_error(priv->sme_reply.reply_status);
@@ -510,16 +496,14 @@
}
r = sme_init_request(priv);
- if (r) {
+ if (r)
return -EIO;
- }
CsrWifiSmePmkidReqSend(0, CSR_WIFI_INTERFACE_IN_USE, action,
pmkid_list->pmkidsCount, pmkid_list->pmkids);
r = sme_wait_for_reply(priv, UNIFI_SME_MGT_SHORT_TIMEOUT);
- if (r) {
+ if (r)
return r;
- }
unifi_trace(priv, UDBG4, "sme_mgt_pmkid: <-- (status=%d)\n", priv->sme_reply.reply_status);
return convert_sme_error(priv->sme_reply.reply_status);
@@ -537,9 +521,8 @@
}
r = sme_init_request(priv);
- if (r) {
+ if (r)
return -EIO;
- }
priv->mib_cfm_buffer = varbind;
priv->mib_cfm_buffer_length = MAX_VARBIND_LENGTH;
@@ -571,15 +554,13 @@
}
r = sme_init_request(priv);
- if (r) {
+ if (r)
return -EIO;
- }
CsrWifiSmeMibSetReqSend(0, length, varbind);
r = sme_wait_for_reply(priv, UNIFI_SME_MGT_SHORT_TIMEOUT);
- if (r) {
+ if (r)
return r;
- }
unifi_trace(priv, UDBG4, "sme_mgt_mib_set: <-- (status=%d)\n", priv->sme_reply.reply_status);
return convert_sme_error(priv->sme_reply.reply_status);
@@ -598,16 +579,14 @@
}
r = sme_init_request(priv);
- if (r) {
+ if (r)
return -EIO;
- }
CsrWifiSmePowerConfigSetReqSend(0, *powerConfig);
r = sme_wait_for_reply(priv, UNIFI_SME_MGT_SHORT_TIMEOUT);
- if (r) {
+ if (r)
return r;
- }
unifi_trace(priv, UDBG4,
"sme_mgt_set_value_async: unifi_mgt_set_value_req <-- (r=%d status=%d)\n",
@@ -637,29 +616,26 @@
}
r = sme_init_request(priv);
- if (r) {
+ if (r)
return -EIO;
- }
CsrWifiSmeSmeStaConfigSetReqSend(0, CSR_WIFI_INTERFACE_IN_USE, *staConfig);
r = sme_wait_for_reply(priv, UNIFI_SME_MGT_SHORT_TIMEOUT);
- if (r) {
+ if (r)
return r;
- }
+
unifi_trace(priv, UDBG4,
"sme_mgt_sme_config_set: CsrWifiSmeSmeStaConfigSetReq <-- (r=%d status=%d)\n",
r, priv->sme_reply.reply_status);
r = sme_init_request(priv);
- if (r) {
+ if (r)
return -EIO;
- }
CsrWifiSmeSmeCommonConfigSetReqSend(0, *deviceConfig);
r = sme_wait_for_reply(priv, UNIFI_SME_MGT_SHORT_TIMEOUT);
- if (r) {
+ if (r)
return r;
- }
unifi_trace(priv, UDBG4,
"sme_mgt_sme_config_set: CsrWifiSmeSmeCommonConfigSetReq <-- (r=%d status=%d)\n",
@@ -693,16 +669,14 @@
}
r = sme_init_request(priv);
- if (r) {
+ if (r)
return -EIO;
- }
CsrWifiSmeMibConfigSetReqSend(0, *mibConfig);
r = sme_wait_for_reply(priv, UNIFI_SME_MGT_SHORT_TIMEOUT);
- if (r) {
+ if (r)
return r;
- }
unifi_trace(priv, UDBG4,
"sme_mgt_mib_config_set: unifi_mgt_set_mib_config_req <-- (r=%d status=%d)\n",
@@ -732,16 +706,14 @@
}
r = sme_init_request(priv);
- if (r) {
+ if (r)
return -EIO;
- }
CsrWifiSmeCoexConfigSetReqSend(0, *coexConfig);
r = sme_wait_for_reply(priv, UNIFI_SME_MGT_SHORT_TIMEOUT);
- if (r) {
+ if (r)
return r;
- }
unifi_trace(priv, UDBG4,
"sme_mgt_coex_config_set: unifi_mgt_set_mib_config_req <-- (r=%d status=%d)\n",
@@ -773,16 +745,14 @@
}
r = sme_init_request(priv);
- if (r) {
+ if (r)
return -EIO;
- }
CsrWifiSmeHostConfigSetReqSend(0, CSR_WIFI_INTERFACE_IN_USE, *hostConfig);
r = sme_wait_for_reply(priv, UNIFI_SME_MGT_SHORT_TIMEOUT);
- if (r) {
+ if (r)
return r;
- }
unifi_trace(priv, UDBG4,
"sme_mgt_host_config_set: unifi_mgt_set_host_config_req <-- (r=%d status=%d)\n",
@@ -815,16 +785,14 @@
unifi_trace(priv, UDBG4, "sme_mgt_versions_get: unifi_mgt_versions_get_req -->\n");
r = sme_init_request(priv);
- if (r) {
+ if (r)
return -EIO;
- }
CsrWifiSmeVersionsGetReqSend(0);
r = sme_wait_for_reply(priv, UNIFI_SME_MGT_SHORT_TIMEOUT);
- if (r) {
+ if (r)
return r;
- }
/* store the reply */
if (versions != NULL) {
@@ -861,16 +829,14 @@
unifi_trace(priv, UDBG4, "sme_mgt_power_config_get: unifi_mgt_power_config_req -->\n");
r = sme_init_request(priv);
- if (r) {
+ if (r)
return -EIO;
- }
CsrWifiSmePowerConfigGetReqSend(0);
r = sme_wait_for_reply(priv, UNIFI_SME_MGT_SHORT_TIMEOUT);
- if (r) {
+ if (r)
return r;
- }
/* store the reply */
if (powerConfig != NULL) {
@@ -905,23 +871,20 @@
unifi_trace(priv, UDBG4, "sme_mgt_host_config_get: unifi_mgt_host_config_get_req -->\n");
r = sme_init_request(priv);
- if (r) {
+ if (r)
return -EIO;
- }
CsrWifiSmeHostConfigGetReqSend(0, CSR_WIFI_INTERFACE_IN_USE);
r = sme_wait_for_reply(priv, UNIFI_SME_MGT_SHORT_TIMEOUT);
- if (r) {
+ if (r)
return r;
- }
/* store the reply */
- if (hostConfig != NULL) {
+ if (hostConfig != NULL)
memcpy((unsigned char*)hostConfig,
(unsigned char*)&priv->sme_reply.hostConfig,
sizeof(CsrWifiSmeHostConfig));
- }
unifi_trace(priv, UDBG4,
"sme_mgt_host_config_get: unifi_mgt_host_config_get_req <-- (r=%d status=%d)\n",
@@ -951,41 +914,35 @@
/* Common device config */
r = sme_init_request(priv);
- if (r) {
+ if (r)
return -EIO;
- }
CsrWifiSmeSmeCommonConfigGetReqSend(0);
r = sme_wait_for_reply(priv, UNIFI_SME_MGT_SHORT_TIMEOUT);
- if (r) {
+ if (r)
return r;
- }
/* store the reply */
- if (deviceConfig != NULL) {
+ if (deviceConfig != NULL)
memcpy((unsigned char*)deviceConfig,
(unsigned char*)&priv->sme_reply.deviceConfig,
sizeof(CsrWifiSmeDeviceConfig));
- }
/* STA config */
r = sme_init_request(priv);
- if (r) {
+ if (r)
return -EIO;
- }
CsrWifiSmeSmeStaConfigGetReqSend(0, CSR_WIFI_INTERFACE_IN_USE);
r = sme_wait_for_reply(priv, UNIFI_SME_MGT_SHORT_TIMEOUT);
- if (r) {
+ if (r)
return r;
- }
/* store the reply */
- if (staConfig != NULL) {
+ if (staConfig != NULL)
memcpy((unsigned char*)staConfig,
(unsigned char*)&priv->sme_reply.staConfig,
sizeof(CsrWifiSmeStaConfig));
- }
unifi_trace(priv, UDBG4,
"sme_mgt_sme_config_get: unifi_mgt_sme_config_get_req <-- (r=%d status=%d)\n",
@@ -1014,23 +971,20 @@
unifi_trace(priv, UDBG4, "sme_mgt_coex_info_get: unifi_mgt_coex_info_get_req -->\n");
r = sme_init_request(priv);
- if (r) {
+ if (r)
return -EIO;
- }
CsrWifiSmeCoexInfoGetReqSend(0);
r = sme_wait_for_reply(priv, UNIFI_SME_MGT_SHORT_TIMEOUT);
- if (r) {
+ if (r)
return r;
- }
/* store the reply */
- if (coexInfo != NULL) {
+ if (coexInfo != NULL)
memcpy((unsigned char*)coexInfo,
(unsigned char*)&priv->sme_reply.coexInfo,
sizeof(CsrWifiSmeCoexInfo));
- }
unifi_trace(priv, UDBG4,
"sme_mgt_coex_info_get: unifi_mgt_coex_info_get_req <-- (r=%d status=%d)\n",
@@ -1060,23 +1014,20 @@
unifi_trace(priv, UDBG4, "sme_mgt_coex_config_get: unifi_mgt_coex_config_get_req -->\n");
r = sme_init_request(priv);
- if (r) {
+ if (r)
return -EIO;
- }
CsrWifiSmeCoexConfigGetReqSend(0);
r = sme_wait_for_reply(priv, UNIFI_SME_MGT_SHORT_TIMEOUT);
- if (r) {
+ if (r)
return r;
- }
/* store the reply */
- if (coexConfig != NULL) {
+ if (coexConfig != NULL)
memcpy((unsigned char*)coexConfig,
(unsigned char*)&priv->sme_reply.coexConfig,
sizeof(CsrWifiSmeCoexConfig));
- }
unifi_trace(priv, UDBG4,
"sme_mgt_coex_config_get: unifi_mgt_coex_config_get_req <-- (r=%d status=%d)\n",
@@ -1104,23 +1055,20 @@
unifi_trace(priv, UDBG4, "sme_mgt_mib_config_get: unifi_mgt_mib_config_get_req -->\n");
r = sme_init_request(priv);
- if (r) {
+ if (r)
return -EIO;
- }
CsrWifiSmeMibConfigGetReqSend(0);
r = sme_wait_for_reply(priv, UNIFI_SME_MGT_SHORT_TIMEOUT);
- if (r) {
+ if (r)
return r;
- }
/* store the reply */
- if (mibConfig != NULL) {
+ if (mibConfig != NULL)
memcpy((unsigned char*)mibConfig,
(unsigned char*)&priv->sme_reply.mibConfig,
sizeof(CsrWifiSmeMibConfig));
- }
unifi_trace(priv, UDBG4,
"sme_mgt_mib_config_get: unifi_mgt_mib_config_get_req <-- (r=%d status=%d)\n",
@@ -1148,23 +1096,20 @@
unifi_trace(priv, UDBG4, "sme_mgt_connection_info_get: unifi_mgt_connection_info_get_req -->\n");
r = sme_init_request(priv);
- if (r) {
+ if (r)
return -EIO;
- }
CsrWifiSmeConnectionInfoGetReqSend(0, CSR_WIFI_INTERFACE_IN_USE);
r = sme_wait_for_reply(priv, UNIFI_SME_MGT_SHORT_TIMEOUT);
- if (r) {
+ if (r)
return r;
- }
/* store the reply */
- if (connectionInfo != NULL) {
+ if (connectionInfo != NULL)
memcpy((unsigned char*)connectionInfo,
(unsigned char*)&priv->sme_reply.connectionInfo,
sizeof(CsrWifiSmeConnectionInfo));
- }
unifi_trace(priv, UDBG4,
"sme_mgt_connection_info_get: unifi_mgt_connection_info_get_req <-- (r=%d status=%d)\n",
@@ -1192,23 +1137,20 @@
unifi_trace(priv, UDBG4, "sme_mgt_connection_config_get: unifi_mgt_connection_config_get_req -->\n");
r = sme_init_request(priv);
- if (r) {
+ if (r)
return -EIO;
- }
CsrWifiSmeConnectionConfigGetReqSend(0, CSR_WIFI_INTERFACE_IN_USE);
r = sme_wait_for_reply(priv, UNIFI_SME_MGT_SHORT_TIMEOUT);
- if (r) {
+ if (r)
return r;
- }
/* store the reply */
- if (connectionConfig != NULL) {
+ if (connectionConfig != NULL)
memcpy((unsigned char*)connectionConfig,
(unsigned char*)&priv->sme_reply.connectionConfig,
sizeof(CsrWifiSmeConnectionConfig));
- }
unifi_trace(priv, UDBG4,
"sme_mgt_connection_config_get: unifi_mgt_connection_config_get_req <-- (r=%d status=%d)\n",
@@ -1236,23 +1178,20 @@
unifi_trace(priv, UDBG4, "sme_mgt_connection_stats_get: unifi_mgt_connection_stats_get_req -->\n");
r = sme_init_request(priv);
- if (r) {
+ if (r)
return -EIO;
- }
CsrWifiSmeConnectionStatsGetReqSend(0, CSR_WIFI_INTERFACE_IN_USE);
r = sme_wait_for_reply(priv, UNIFI_SME_MGT_SHORT_TIMEOUT);
- if (r) {
+ if (r)
return r;
- }
/* store the reply */
- if (connectionStats != NULL) {
+ if (connectionStats != NULL)
memcpy((unsigned char*)connectionStats,
(unsigned char*)&priv->sme_reply.connectionStats,
sizeof(CsrWifiSmeConnectionStats));
- }
unifi_trace(priv, UDBG4,
"sme_mgt_connection_stats_get: unifi_mgt_connection_stats_get_req <-- (r=%d status=%d)\n",
@@ -1272,58 +1211,56 @@
int sme_mgt_packet_filter_set(unifi_priv_t *priv)
{
- CsrWifiIp4Address ipAddress = {{0xFF, 0xFF, 0xFF, 0xFF }};
- if (priv->smepriv == NULL) {
- unifi_error(priv, "sme_mgt_packet_filter_set: invalid smepriv\n");
- return -EIO;
- }
- if (priv->packet_filters.arp_filter) {
- ipAddress.a[0] = (priv->sta_ip_address ) & 0xFF;
- ipAddress.a[1] = (priv->sta_ip_address >> 8) & 0xFF;
- ipAddress.a[2] = (priv->sta_ip_address >> 16) & 0xFF;
- ipAddress.a[3] = (priv->sta_ip_address >> 24) & 0xFF;
- }
+ CsrWifiIp4Address ipAddress = {{0xFF, 0xFF, 0xFF, 0xFF }};
+ if (priv->smepriv == NULL) {
+ unifi_error(priv, "sme_mgt_packet_filter_set: invalid smepriv\n");
+ return -EIO;
+ }
+ if (priv->packet_filters.arp_filter) {
+ ipAddress.a[0] = (priv->sta_ip_address ) & 0xFF;
+ ipAddress.a[1] = (priv->sta_ip_address >> 8) & 0xFF;
+ ipAddress.a[2] = (priv->sta_ip_address >> 16) & 0xFF;
+ ipAddress.a[3] = (priv->sta_ip_address >> 24) & 0xFF;
+ }
- unifi_trace(priv, UDBG5,
- "sme_mgt_packet_filter_set: IP address %d.%d.%d.%d\n",
- ipAddress.a[0], ipAddress.a[1],
- ipAddress.a[2], ipAddress.a[3]);
+ unifi_trace(priv, UDBG5,
+ "sme_mgt_packet_filter_set: IP address %d.%d.%d.%d\n",
+ ipAddress.a[0], ipAddress.a[1],
+ ipAddress.a[2], ipAddress.a[3]);
- /* Doesn't block for a confirm */
- CsrWifiSmePacketFilterSetReqSend(0, CSR_WIFI_INTERFACE_IN_USE,
- priv->packet_filters.tclas_ies_length,
- priv->filter_tclas_ies,
- priv->packet_filters.filter_mode,
- ipAddress);
- return 0;
+ /* Doesn't block for a confirm */
+ CsrWifiSmePacketFilterSetReqSend(0, CSR_WIFI_INTERFACE_IN_USE,
+ priv->packet_filters.tclas_ies_length,
+ priv->filter_tclas_ies,
+ priv->packet_filters.filter_mode,
+ ipAddress);
+ return 0;
}
int sme_mgt_tspec(unifi_priv_t *priv, CsrWifiSmeListAction action,
u32 tid, CsrWifiSmeDataBlock *tspec, CsrWifiSmeDataBlock *tclas)
{
- int r;
+ int r;
- if (priv->smepriv == NULL) {
- unifi_error(priv, "sme_mgt_tspec: invalid smepriv\n");
- return -EIO;
- }
+ if (priv->smepriv == NULL) {
+ unifi_error(priv, "sme_mgt_tspec: invalid smepriv\n");
+ return -EIO;
+ }
- r = sme_init_request(priv);
- if (r) {
- return -EIO;
- }
+ r = sme_init_request(priv);
+ if (r)
+ return -EIO;
- CsrWifiSmeTspecReqSend(0, CSR_WIFI_INTERFACE_IN_USE,
- action, tid, TRUE, 0,
- tspec->length, tspec->data,
- tclas->length, tclas->data);
- r = sme_wait_for_reply(priv, UNIFI_SME_MGT_SHORT_TIMEOUT);
- if (r) {
- return r;
- }
+ CsrWifiSmeTspecReqSend(0, CSR_WIFI_INTERFACE_IN_USE,
+ action, tid, TRUE, 0,
+ tspec->length, tspec->data,
+ tclas->length, tclas->data);
+ r = sme_wait_for_reply(priv, UNIFI_SME_MGT_SHORT_TIMEOUT);
+ if (r)
+ return r;
- unifi_trace(priv, UDBG4, "sme_mgt_tspec: <-- (status=%d)\n", priv->sme_reply.reply_status);
- return convert_sme_error(priv->sme_reply.reply_status);
+ unifi_trace(priv, UDBG4, "sme_mgt_tspec: <-- (status=%d)\n", priv->sme_reply.reply_status);
+ return convert_sme_error(priv->sme_reply.reply_status);
}
@@ -1339,9 +1276,8 @@
}
r = sme_init_request(priv);
- if (r) {
+ if (r)
return -EIO;
- }
/* Suspend the SME, which MAY cause it to power down UniFi */
CsrWifiRouterCtrlSuspendIndSend(priv->CSR_WIFI_SME_IFACEQUEUE,0, 0, priv->wol_suspend);
@@ -1427,17 +1363,15 @@
}
r = sme_init_request(priv);
- if (r) {
+ if (r)
return -EIO;
- }
CsrWifiRouterCtrlResumeIndSend(priv->CSR_WIFI_SME_IFACEQUEUE,0, priv->wol_suspend);
r = sme_wait_for_reply(priv, UNIFI_SME_SYS_LONG_TIMEOUT);
- if (r) {
+ if (r)
unifi_notice(priv,
"resume: SME did not reply, return success anyway\n");
- }
return 0;
}
@@ -1453,16 +1387,14 @@
}
r = sme_init_request(priv);
- if (r) {
+ if (r)
return -EIO;
- }
CsrWifiNmeApStopReqSend(0,interface_tag);
r = sme_wait_for_reply(priv, UNIFI_SME_MGT_SHORT_TIMEOUT);
- if (r) {
+ if (r)
return r;
- }
unifi_trace(priv, UDBG4,
"sme_ap_stop <-- (r=%d status=%d)\n",
@@ -1484,9 +1416,8 @@
}
r = sme_init_request(priv);
- if (r) {
+ if (r)
return -EIO;
- }
CsrWifiNmeApStartReqSend(0,interface_tag,CSR_WIFI_AP_TYPE_LEGACY,FALSE,
ap_config->ssid,1,ap_config->channel,
@@ -1494,9 +1425,8 @@
p2p_go_param,FALSE);
r = sme_wait_for_reply(priv, UNIFI_SME_MGT_SHORT_TIMEOUT);
- if (r) {
+ if (r)
return r;
- }
unifi_trace(priv, UDBG4,
"sme_ap_start <-- (r=%d status=%d)\n",
@@ -1518,14 +1448,15 @@
}
r = sme_init_request(priv);
- if (r) {
+ if (r)
return -EIO;
- }
CsrWifiNmeApConfigSetReqSend(0,*group_security_config,
*ap_mac_config);
r = sme_wait_for_reply(priv, UNIFI_SME_MGT_SHORT_TIMEOUT);
+ if (r)
+ return r;
unifi_trace(priv, UDBG4,
"sme_ap_config <-- (r=%d status=%d)\n",
diff --git a/drivers/staging/csr/sme_native.c b/drivers/staging/csr/sme_native.c
index d7a5125..525fe1b 100644
--- a/drivers/staging/csr/sme_native.c
+++ b/drivers/staging/csr/sme_native.c
@@ -12,7 +12,6 @@
*/
#include <linux/netdevice.h>
-#include <linux/version.h>
#include "unifi_priv.h"
#include "csr_wifi_hip_unifi.h"
#include "csr_wifi_hip_conversions.h"
@@ -22,23 +21,17 @@
int
uf_sme_init(unifi_priv_t *priv)
{
- func_enter();
-
sema_init(&priv->mlme_blocking_mutex, 1);
#ifdef CSR_SUPPORT_WEXT
{
int r = uf_init_wext_interface(priv);
if (r != 0) {
- func_exit();
return r;
}
}
#endif
-
-
- func_exit();
return 0;
} /* uf_sme_init() */
@@ -47,8 +40,6 @@
uf_sme_deinit(unifi_priv_t *priv)
{
- func_enter();
-
/* Free memory allocated for the scan table */
/* unifi_clear_scan_table(priv); */
@@ -59,8 +50,6 @@
uf_deinit_wext_interface(priv);
#endif
-
- func_exit();
} /* uf_sme_deinit() */
@@ -222,8 +211,6 @@
CSR_SIGNAL signal;
ul_client_t *client = pcli;
- func_enter();
-
if (client == NULL) {
unifi_error(NULL, "sme_native_log_event: client has exited\n");
return;
@@ -334,8 +321,6 @@
/* Wake any waiting user process */
wake_up_interruptible(&client->udi_wq);
- func_exit();
-
} /* sme_native_log_event() */
@@ -461,8 +446,6 @@
unifi_priv_t *priv = uf_find_instance(pcli->instance);
int id, r;
- func_enter();
-
/* Just a sanity check */
if ((sig_packed == NULL) || (sig_len <= 0)) {
return;
@@ -542,7 +525,6 @@
break;
}
- func_exit();
} /* sme_native_mlme_event_handler() */
@@ -574,14 +556,11 @@
{
int r = 0;
- func_enter();
-
#ifdef CSR_SUPPORT_WEXT
/* The reset clears any 802.11 association. */
priv->wext_conf.flag_associated = 0;
#endif
- func_exit();
return r;
} /* unifi_reset_state() */
diff --git a/drivers/staging/csr/sme_sys.c b/drivers/staging/csr/sme_sys.c
index 5b26c41..2b06819 100644
--- a/drivers/staging/csr/sme_sys.c
+++ b/drivers/staging/csr/sme_sys.c
@@ -14,7 +14,6 @@
* ---------------------------------------------------------------------------
*/
-#include <linux/version.h>
#include "csr_wifi_hip_unifiversion.h"
#include "unifi_priv.h"
#include "csr_wifi_hip_conversions.h"
@@ -413,8 +412,6 @@
0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
0xc0, 0xa8, 0x00, 0x02};
- func_enter();
-
csrResult = unifi_net_data_malloc(priv, &bulkdata.d[0], sizeof(arp_req));
if (csrResult != CSR_RESULT_SUCCESS)
{
@@ -480,8 +477,6 @@
return;
}
- func_exit();
-
}
#endif /* CSR_WIFI_SEND_GRATUITOUS_ARP */
@@ -2102,7 +2097,7 @@
u8 freeSlotFound = FALSE;
CsrWifiRouterCtrlStaInfo_t *newRecord = NULL;
netInterface_priv_t *interfacePriv = priv->interfacePriv[req->interfaceTag];
- CsrTime currentTime, currentTimeHi;
+ u32 currentTime, currentTimeHi;
unsigned long lock_flags;
if (req->interfaceTag >= CSR_WIFI_NUM_INTERFACES) {
@@ -2296,8 +2291,8 @@
struct unifi_priv *priv;
CsrWifiRouterCtrlStaInfo_t *sta_record = NULL;
u8 i = 0;
- CsrTime now;
- CsrTime inactive_time;
+ u32 now;
+ u32 inactive_time;
netInterface_priv_t *interfacePriv = (netInterface_priv_t *) data;
if (!interfacePriv)
@@ -2329,11 +2324,11 @@
if (sta_record->lastActivity > now)
{
/* simple timer wrap (for 1 wrap) */
- inactive_time = CsrTimeAdd((CsrTime)CsrTimeSub(CSR_SCHED_TIME_MAX, sta_record->lastActivity), now);
+ inactive_time = CsrTimeAdd((u32)CsrTimeSub(CSR_SCHED_TIME_MAX, sta_record->lastActivity), now);
}
else
{
- inactive_time = (CsrTime)CsrTimeSub(now, sta_record->lastActivity);
+ inactive_time = (u32)CsrTimeSub(now, sta_record->lastActivity);
}
if (inactive_time >= STA_INACTIVE_TIMEOUT_VAL)
@@ -2411,8 +2406,6 @@
struct list_head send_cfm_list;
u8 j;
- func_enter();
-
if(!staInfo) {
return;
}
diff --git a/drivers/staging/csr/sme_userspace.h b/drivers/staging/csr/sme_userspace.h
index 7816b15..ebe371c 100644
--- a/drivers/staging/csr/sme_userspace.h
+++ b/drivers/staging/csr/sme_userspace.h
@@ -32,7 +32,7 @@
#include "csr_wifi_sme_lib.h"
void CsrWifiRouterTransportInit(unifi_priv_t *priv);
-void CsrWifiRouterTransportRecv(unifi_priv_t *priv, u8* buffer, size_t bufferLength);
+void CsrWifiRouterTransportRecv(unifi_priv_t *priv, u8 *buffer, size_t bufferLength);
void CsrWifiRouterTransportDeInit(unifi_priv_t *priv);
#endif /* __LINUX_SME_USERSPACE_H__ */
diff --git a/drivers/staging/csr/sme_wext.c b/drivers/staging/csr/sme_wext.c
index b58c0c6..5e06a38 100644
--- a/drivers/staging/csr/sme_wext.c
+++ b/drivers/staging/csr/sme_wext.c
@@ -800,7 +800,6 @@
u8 enable;
netInterface_priv_t *interfacePriv = (netInterface_priv_t *)netdev_priv(dev);
unifi_priv_t *priv = interfacePriv->privPtr;
- func_enter();
unifi_trace(priv, UDBG1, "iwprivsconfwapi\n" );
@@ -824,7 +823,6 @@
~(CSR_WIFI_SME_ENCRYPTION_CIPHER_PAIRWISE_SMS4 | CSR_WIFI_SME_ENCRYPTION_CIPHER_GROUP_SMS4);
}
- func_exit();
return 0;
}
@@ -837,7 +835,6 @@
unifiio_wapi_key_t inKey;
netInterface_priv_t *interfacePriv = (netInterface_priv_t *)netdev_priv(dev);
unifi_priv_t *priv = interfacePriv->privPtr;
- func_enter();
unifi_trace(priv, UDBG1, "iwprivswpikey\n" );
@@ -882,7 +879,6 @@
return convert_sme_error(r);
}
- func_exit();
return r;
}
#endif
@@ -914,7 +910,6 @@
unifi_priv_t *priv = interfacePriv->privPtr;
struct iw_freq *freq = (struct iw_freq *)wrqu;
- func_enter();
unifi_trace(priv, UDBG2, "unifi_siwfreq\n");
if(interfacePriv->interfaceMode == CSR_WIFI_ROUTER_CTRL_MODE_AP ||
@@ -935,7 +930,6 @@
priv->connection_config.adhocChannel = wext_freq_to_channel(freq->m, freq->e);
}
- func_exit();
return 0;
} /* unifi_siwfreq() */
@@ -950,7 +944,6 @@
int err = 0;
CsrWifiSmeConnectionInfo connectionInfo;
- func_enter();
unifi_trace(priv, UDBG2, "unifi_giwfreq\n");
CHECK_INITED(priv);
@@ -970,7 +963,6 @@
(connectionInfo.networkType80211 == CSR_WIFI_SME_RADIO_IF_GHZ_5_0));
freq->e = 6;
- func_exit();
return convert_sme_error(err);
} /* unifi_giwfreq() */
@@ -982,7 +974,6 @@
netInterface_priv_t *interfacePriv = (netInterface_priv_t *)netdev_priv(dev);
unifi_priv_t *priv = interfacePriv->privPtr;
- func_enter();
unifi_trace(priv, UDBG2, "unifi_siwmode\n");
if(interfacePriv->interfaceMode == CSR_WIFI_ROUTER_CTRL_MODE_AP ||
@@ -1011,7 +1002,6 @@
priv->connection_config.ssid.length = 0;
memset(priv->connection_config.bssid.a, 0xFF, ETH_ALEN);
- func_exit();
return 0;
} /* unifi_siwmode() */
@@ -1026,7 +1016,6 @@
unifi_priv_t *priv = interfacePriv->privPtr;
CsrWifiSmeConnectionConfig connectionConfig;
- func_enter();
unifi_trace(priv, UDBG2, "unifi_giwmode\n");
CHECK_INITED(priv);
@@ -1069,7 +1058,6 @@
}
unifi_trace(priv, UDBG4, "unifi_giwmode: mode = 0x%x\n", wrqu->mode);
- func_exit();
return r;
} /* unifi_giwmode() */
@@ -1192,8 +1180,6 @@
unifi_priv_t *priv = interfacePriv->privPtr;
int err = 0;
- func_enter();
-
CHECK_INITED(priv);
if(interfacePriv->interfaceMode == CSR_WIFI_ROUTER_CTRL_MODE_AP ||
@@ -1235,11 +1221,9 @@
err = sme_mgt_connect(priv);
if (err) {
unifi_error(priv, "unifi_siwap: Join failed, status %d\n", err);
- func_exit();
return convert_sme_error(err);
}
}
- func_exit();
return 0;
} /* unifi_siwap() */
@@ -1255,8 +1239,6 @@
int r = 0;
u8 *bssid;
- func_enter();
-
CHECK_INITED(priv);
unifi_trace(priv, UDBG2, "unifi_giwap\n");
@@ -1281,7 +1263,6 @@
memset(wrqu->ap_addr.sa_data, 0, ETH_ALEN);
}
- func_exit();
return 0;
} /* unifi_giwap() */
@@ -1302,8 +1283,6 @@
struct iw_scan_req *req = (struct iw_scan_req *) extra;
#endif
- func_enter();
-
CHECK_INITED(priv);
if(interfacePriv->interfaceMode == CSR_WIFI_ROUTER_CTRL_MODE_AP ||
@@ -1366,7 +1345,6 @@
kfree(channel_list);
}
- func_exit();
return r;
} /* unifi_siwscan() */
@@ -1707,7 +1685,6 @@
int len;
int err = 0;
- func_enter();
CHECK_INITED(priv);
if(interfacePriv->interfaceMode == CSR_WIFI_ROUTER_CTRL_MODE_AP ||
@@ -1760,11 +1737,9 @@
UF_RTNL_LOCK();
if (err) {
unifi_error(priv, "unifi_siwessid: Join failed, status %d\n", err);
- func_exit();
return convert_sme_error(err);
}
- func_exit();
return 0;
} /* unifi_siwessid() */
@@ -1779,7 +1754,6 @@
CsrWifiSmeConnectionInfo connectionInfo;
int r = 0;
- func_enter();
unifi_trace(priv, UDBG2, "unifi_giwessid\n");
CHECK_INITED(priv);
@@ -1805,7 +1779,6 @@
data->length, essid);
}
- func_exit();
return 0;
} /* unifi_giwessid() */
@@ -1821,8 +1794,6 @@
CsrWifiSmeMibConfig mibConfig;
int r;
- func_enter();
-
CHECK_INITED(priv);
unifi_trace(priv, UDBG2, "unifi_siwrate\n");
@@ -1863,7 +1834,6 @@
return r;
}
- func_exit();
return 0;
} /* unifi_siwrate() */
@@ -1882,7 +1852,6 @@
CsrWifiSmeMibConfig mibConfig;
CsrWifiSmeConnectionStats connectionStats;
- func_enter();
unifi_trace(priv, UDBG2, "unifi_giwrate\n");
CHECK_INITED(priv);
@@ -1913,8 +1882,6 @@
args->value = bitrate * 500000;
args->fixed = !flag;
- func_exit();
-
return 0;
} /* unifi_giwrate() */
@@ -2081,7 +2048,6 @@
int privacy = -1;
CsrWifiSmeKey sme_key;
- func_enter();
unifi_trace(priv, UDBG2, "unifi_siwencode\n");
CHECK_INITED(priv);
@@ -2236,7 +2202,6 @@
CSR_WIFI_SME_ENCRYPTION_CIPHER_NONE;
}
- func_exit_r(rc);
return convert_sme_error(rc);
} /* unifi_siwencode() */
@@ -2467,7 +2432,6 @@
netInterface_priv_t *interfacePriv = (netInterface_priv_t *)netdev_priv(dev);
unifi_priv_t *priv = interfacePriv->privPtr;
struct iw_mlme *mlme = (struct iw_mlme *)extra;
- func_enter();
unifi_trace(priv, UDBG2, "unifi_siwmlme\n");
CHECK_INITED(priv);
@@ -2488,11 +2452,9 @@
UF_RTNL_LOCK();
break;
default:
- func_exit_r(-EOPNOTSUPP);
return -EOPNOTSUPP;
}
- func_exit();
return 0;
} /* unifi_siwmlme() */
@@ -2529,7 +2491,6 @@
unifi_priv_t *priv = interfacePriv->privPtr;
int len;
- func_enter();
unifi_trace(priv, UDBG2, "unifi_siwgenie\n");
if(interfacePriv->interfaceMode == CSR_WIFI_ROUTER_CTRL_MODE_AP ||
@@ -2548,20 +2509,17 @@
len = wrqu->data.length;
if (len == 0) {
- func_exit();
return 0;
}
priv->connection_config.mlmeAssociateReqInformationElements = kmalloc(len, GFP_KERNEL);
if (priv->connection_config.mlmeAssociateReqInformationElements == NULL) {
- func_exit();
return -ENOMEM;
}
priv->connection_config.mlmeAssociateReqInformationElementsLength = len;
memcpy( priv->connection_config.mlmeAssociateReqInformationElements, extra, len);
- func_exit();
return 0;
} /* unifi_siwgenie() */
@@ -2574,7 +2532,6 @@
unifi_priv_t *priv = interfacePriv->privPtr;
int len;
- func_enter();
unifi_trace(priv, UDBG2, "unifi_giwgenie\n");
if(interfacePriv->interfaceMode == CSR_WIFI_ROUTER_CTRL_MODE_AP ||
@@ -2599,7 +2556,6 @@
wrqu->data.length = len;
memcpy(extra, priv->connection_config.mlmeAssociateReqInformationElements, len);
- func_exit();
return 0;
} /* unifi_giwgenie() */
@@ -2627,7 +2583,6 @@
unifi_priv_t *priv = interfacePriv->privPtr;
CsrWifiSmeAuthModeMask new_auth;
- func_enter();
unifi_trace(priv, UDBG2, "unifi_siwauth\n");
if(interfacePriv->interfaceMode == CSR_WIFI_ROUTER_CTRL_MODE_AP ||
@@ -2848,7 +2803,6 @@
}
unifi_trace(priv, UDBG2, "authModeMask = %d", priv->connection_config.authModeMask);
- func_exit();
return 0;
} /* _unifi_siwauth() */
@@ -2911,8 +2865,6 @@
CsrWifiSmeKey sme_key;
CsrWifiSmeKeyType key_type;
- func_enter();
-
CHECK_INITED(priv);
if(interfacePriv->interfaceMode == CSR_WIFI_ROUTER_CTRL_MODE_AP ||
@@ -3061,7 +3013,6 @@
return convert_sme_error(r);
}
- func_exit();
return r;
} /* _unifi_siwencodeext() */
diff --git a/drivers/staging/csr/ul_int.c b/drivers/staging/csr/ul_int.c
index 4013d02..0fae6f4 100644
--- a/drivers/staging/csr/ul_int.c
+++ b/drivers/staging/csr/ul_int.c
@@ -12,7 +12,6 @@
*
* ***************************************************************************
*/
-#include <linux/version.h>
#include "csr_wifi_hip_unifi.h"
#include "csr_wifi_hip_conversions.h"
#include "unifi_priv.h"
diff --git a/drivers/staging/csr/unifi_event.c b/drivers/staging/csr/unifi_event.c
index c27b23da..e81a998 100644
--- a/drivers/staging/csr/unifi_event.c
+++ b/drivers/staging/csr/unifi_event.c
@@ -376,8 +376,6 @@
s16 signal_id;
u8 pktIndToSme = FALSE, freeBulkData = FALSE;
- func_enter();
-
unifi_trace(priv, UDBG5, "unifi_process_receive_event: "
"%04x %04x %04x %04x %04x %04x %04x %04x (%d)\n",
CSR_GET_UINT16_FROM_LITTLE_ENDIAN((sigdata) + sizeof(s16)*0) & 0xFFFF,
@@ -523,7 +521,6 @@
unifi_net_data_free(priv, (void *)&bulkdata->d[i]);
}
}
- func_exit();
return;
}
} /* CSR_MA_PACKET_INDICATION_ID */
@@ -573,7 +570,6 @@
}
}
- func_exit();
} /* unifi_process_receive_event() */
@@ -587,7 +583,6 @@
{
unifi_priv_t *priv = (unifi_priv_t*)ospriv;
- func_enter();
unifi_trace(priv, UDBG4, "rx_wq_handler: RdPtr = %d WritePtr = %d\n",
priv->rxSignalBuffer.readPointer,priv->rxSignalBuffer.writePointer);
if(priv != NULL) {
@@ -605,7 +600,6 @@
}
priv->rxSignalBuffer.readPointer = readPointer;
}
- func_exit();
}
void rx_wq_handler(struct work_struct *work)
@@ -655,7 +649,6 @@
u8 writePointer;
int i;
rx_buff_struct_t * rx_buff;
- func_enter();
unifi_trace(priv, UDBG5, "unifi_receive_event: "
"%04x %04x %04x %04x %04x %04x %04x %04x (%d)\n",
@@ -695,6 +688,5 @@
#else
unifi_process_receive_event(ospriv, sigdata, siglen, bulkdata);
#endif
- func_exit();
} /* unifi_receive_event() */
diff --git a/drivers/staging/csr/unifi_os.h b/drivers/staging/csr/unifi_os.h
index 4e63a94..56a2698 100644
--- a/drivers/staging/csr/unifi_os.h
+++ b/drivers/staging/csr/unifi_os.h
@@ -61,26 +61,6 @@
* etc.
*/
-#define func_enter() \
- do { \
- if (unifi_debug >= 5) { \
- printk("unifi: => %s\n", __FUNCTION__); \
- } \
- } while (0)
-#define func_exit() \
- do { \
- if (unifi_debug >= 5) { \
- printk("unifi: <= %s\n", __FUNCTION__); \
- } \
- } while (0)
-#define func_exit_r(_rc) \
- do { \
- if (unifi_debug >= 5) { \
- printk("unifi: <= %s %d\n", __FUNCTION__, (int)(_rc)); \
- } \
- } while (0)
-
-
#define ASSERT(cond) \
do { \
if (!(cond)) { \
@@ -107,9 +87,6 @@
#else
/* Stubs */
-#define func_enter()
-#define func_exit()
-#define func_exit_r(_rc)
#define ASSERT(cond)
diff --git a/drivers/staging/csr/unifi_pdu_processing.c b/drivers/staging/csr/unifi_pdu_processing.c
index ae7c8fc..95efc36 100644
--- a/drivers/staging/csr/unifi_pdu_processing.c
+++ b/drivers/staging/csr/unifi_pdu_processing.c
@@ -14,7 +14,6 @@
* ---------------------------------------------------------------------------
*/
-#include <linux/version.h>
#include <linux/types.h>
#include <linux/etherdevice.h>
#include <linux/vmalloc.h>
@@ -409,7 +408,6 @@
unifi_error(priv,
"Failed to allocate %d bytes for tx packet record\n",
sizeof(tx_buffered_packets_t));
- func_exit();
return CSR_RESULT_FAILURE;
}
@@ -1117,8 +1115,8 @@
staRecord->nullDataHostTag = INVALID_HOST_TAG;
if(pkt_cfm->TransmissionStatus == CSR_TX_RETRY_LIMIT){
- CsrTime now;
- CsrTime inactive_time;
+ u32 now;
+ u32 inactive_time;
unifi_trace(priv, UDBG1, "Nulldata to probe STA ALIVE Failed with retry limit\n");
/* Recheck if there is some activity after null data is sent.
@@ -1134,12 +1132,12 @@
if (staRecord->lastActivity > now)
{
/* simple timer wrap (for 1 wrap) */
- inactive_time = CsrTimeAdd((CsrTime)CsrTimeSub(CSR_SCHED_TIME_MAX, staRecord->lastActivity),
+ inactive_time = CsrTimeAdd((u32)CsrTimeSub(CSR_SCHED_TIME_MAX, staRecord->lastActivity),
now);
}
else
{
- inactive_time = (CsrTime)CsrTimeSub(now, staRecord->lastActivity);
+ inactive_time = (u32)CsrTimeSub(now, staRecord->lastActivity);
}
if (inactive_time >= STA_INACTIVE_TIMEOUT_VAL)
@@ -2024,7 +2022,6 @@
netInterface_priv_t *interfacePriv = priv->interfacePriv[interfaceTag];
u32 hostTag = 0xffffffff;
- func_enter();
if(!isRouterBufferEnabled(priv,UNIFI_TRAFFIC_Q_VO)) {
while((interfacePriv->dtimActive)&& (buffered_pkt=dequeue_tx_data_pdu(priv,&interfacePriv->genericMulticastOrBroadCastMgtFrames))) {
buffered_pkt->transmissionControl |= (TRANSMISSION_CONTROL_TRIGGER_MASK);
@@ -2124,7 +2121,6 @@
CSR_RESULT_CODE resultCode = CSR_RC_SUCCESS;
netInterface_priv_t *interfacePriv;
- func_enter();
unifi_trace(priv, UDBG3,
"uf_process_ma_vif_availibility_ind: Process signal 0x%.4X\n",
*((u16*)sigdata));
@@ -2134,7 +2130,6 @@
unifi_error(priv,
"uf_process_ma_vif_availibility_ind: Received unknown signal 0x%.4X.\n",
CSR_GET_UINT16_FROM_LITTLE_ENDIAN(sigdata));
- func_exit();
return;
}
ind = &signal.u.MaVifAvailabilityIndication;
@@ -2369,8 +2364,6 @@
u8 moreData = FALSE;
s8 r =0;
- func_enter();
-
unifi_trace(priv,UDBG2,"uf_send_buffered_data_from_ac :\n");
while(!isRouterBufferEnabled(priv,queue) &&
@@ -2399,8 +2392,6 @@
}
}
- func_exit();
-
}
void uf_send_buffered_frames(unifi_priv_t *priv,unifi_TrafficQueue q)
@@ -2416,7 +2407,6 @@
if(!((interfacePriv->interfaceMode == CSR_WIFI_ROUTER_CTRL_MODE_AP) ||
(interfacePriv->interfaceMode == CSR_WIFI_ROUTER_CTRL_MODE_P2PGO)))
return;
- func_enter();
queue = (q<=3)?q:0;
@@ -2451,7 +2441,6 @@
interfacePriv->dtimActive = FALSE;
}
}
- func_exit();
return;
}
if(priv->pausedStaHandle[queue] > 7) {
@@ -2542,7 +2531,6 @@
*/
unifi_trace(priv, UDBG4, "csrWifiHipSendBufferedFrames: UAPSD Resume Q=%x\n", queue);
resume_suspended_uapsd(priv, interfaceTag);
- func_exit();
}
@@ -2770,7 +2758,6 @@
CSR_RATE transmitRate = 0;
- func_enter();
/* Send a Null Frame to Peer,
* 32= size of mac header */
csrResult = unifi_net_data_malloc(priv, &bulkdata.d[0], MAC_HEADER_SIZE + QOS_CONTROL_HEADER_SIZE);
@@ -2823,7 +2810,6 @@
unifi_net_data_free(priv, &bulkdata.d[0]);
}
- func_exit();
return;
}
@@ -2842,7 +2828,6 @@
CSR_MA_PACKET_REQUEST *req = &signal.u.MaPacketRequest;
unsigned long lock_flags;
- func_enter();
/* Send a Null Frame to Peer, size = 24 for MAC header */
csrResult = unifi_net_data_malloc(priv, &bulkdata.d[0], MAC_HEADER_SIZE);
@@ -2909,7 +2894,6 @@
srcStaInfo->nullDataHostTag = INVALID_HOST_TAG;
}
- func_exit();
return;
}
@@ -3327,8 +3311,6 @@
struct list_head *placeHolder;
unsigned long lock_flags;
- func_enter();
-
spin_lock_irqsave(&priv->tx_q_lock,lock_flags);
/* Search through the list and if confirmation required for any frames,
@@ -3357,7 +3339,6 @@
spin_unlock_irqrestore(&priv->tx_q_lock,lock_flags);
- func_exit();
}
@@ -3492,11 +3473,11 @@
}
/* Function to do inactivity */
-void uf_check_inactivity(unifi_priv_t *priv, u16 interfaceTag, CsrTime currentTime)
+void uf_check_inactivity(unifi_priv_t *priv, u16 interfaceTag, u32 currentTime)
{
u32 i;
CsrWifiRouterCtrlStaInfo_t *staInfo;
- CsrTime elapsedTime; /* Time in microseconds */
+ u32 elapsedTime; /* Time in microseconds */
netInterface_priv_t *interfacePriv = priv->interfacePriv[interfaceTag];
CsrWifiMacAddress peerMacAddress;
unsigned long lock_flags;
@@ -3543,8 +3524,8 @@
/* Function to update activity of a station */
void uf_update_sta_activity(unifi_priv_t *priv, u16 interfaceTag, const u8 *peerMacAddress)
{
- CsrTime elapsedTime, currentTime; /* Time in microseconds */
- CsrTime timeHi; /* Not used - Time in microseconds */
+ u32 elapsedTime, currentTime; /* Time in microseconds */
+ u32 timeHi; /* Not used - Time in microseconds */
CsrWifiRouterCtrlStaInfo_t *staInfo;
netInterface_priv_t *interfacePriv = priv->interfacePriv[interfaceTag];
unsigned long lock_flags;
@@ -3595,7 +3576,6 @@
int r;
unsigned long lock_flags;
- func_enter();
while(!isRouterBufferEnabled(priv,3) &&
((buffered_pkt=dequeue_tx_data_pdu(priv,&interfacePriv->genericMgtFrames))!=NULL)) {
buffered_pkt->transmissionControl &=
@@ -3672,7 +3652,6 @@
}
}
}
- func_exit();
}
void update_eosp_to_head_of_broadcast_list_head(unifi_priv_t *priv,u16 interfaceTag)
{
@@ -3683,7 +3662,6 @@
struct list_head *placeHolder;
tx_buffered_packets_t *tx_q_item;
- func_enter();
if (interfacePriv->noOfbroadcastPktQueued) {
/* Update the EOSP to the HEAD of b/c list
@@ -3700,7 +3678,6 @@
}
spin_unlock_irqrestore(&priv->tx_q_lock,lock_flags);
}
- func_exit();
}
/*
diff --git a/drivers/staging/csr/unifi_priv.h b/drivers/staging/csr/unifi_priv.h
index aec8e28..d20d74c 100644
--- a/drivers/staging/csr/unifi_priv.h
+++ b/drivers/staging/csr/unifi_priv.h
@@ -17,7 +17,6 @@
#ifndef __LINUX_UNIFI_PRIV_H__
#define __LINUX_UNIFI_PRIV_H__ 1
-#include <linux/version.h>
#include <linux/module.h>
#include <linux/string.h>
#include <linux/errno.h>
@@ -313,7 +312,7 @@
CSR_CLIENT_TAG nullDataHostTag;
/* Activity timestamps for the station */
- CsrTime lastActivity;
+ u32 lastActivity;
/* during m/c transmission sp suspended */
u8 uspSuspend;
@@ -653,7 +652,7 @@
bulk_data_param_t bulkdata;
CSR_SIGNAL signal;
u16 sn;
- CsrTime recv_time;
+ u32 recv_time;
} frame_desc_struct;
typedef struct {
@@ -736,7 +735,7 @@
u8 sta_activity_check_enabled;
/* Timestamp when the last inactivity check was done */
- CsrTime last_inactivity_check;
+ u32 last_inactivity_check;
/*number of multicast or borad cast packets queued*/
u16 noOfbroadcastPktQueued;
diff --git a/drivers/staging/csr/unifi_sme.c b/drivers/staging/csr/unifi_sme.c
index ff639d4..7c6c413 100644
--- a/drivers/staging/csr/unifi_sme.c
+++ b/drivers/staging/csr/unifi_sme.c
@@ -78,23 +78,19 @@
CsrResult result = CSR_RESULT_SUCCESS;
int r;
- func_enter();
/* Just a sanity check */
if ((signal == NULL) || (signal_len <= 0)) {
- func_exit();
return;
}
priv = uf_find_instance(pcli->instance);
if (!priv) {
unifi_error(priv, "sme_log_event: invalid priv\n");
- func_exit();
return;
}
if (priv->smepriv == NULL) {
unifi_error(priv, "sme_log_event: invalid smepriv\n");
- func_exit();
return;
}
@@ -109,7 +105,6 @@
if ((unpacked_signal.SignalPrimitiveHeader.SignalId == CSR_DEBUG_STRING_INDICATION_ID) ||
(unpacked_signal.SignalPrimitiveHeader.SignalId == CSR_DEBUG_WORD16_INDICATION_ID))
{
- func_exit();
return;
}
if (unpacked_signal.SignalPrimitiveHeader.SignalId == CSR_MA_PACKET_INDICATION_ID)
@@ -171,7 +166,6 @@
if (interfaceTag >= CSR_WIFI_NUM_INTERFACES)
{
unifi_error(priv, "Bad MA_PACKET_CONFIRM interfaceTag %d\n", interfaceTag);
- func_exit();
return;
}
@@ -219,7 +213,6 @@
} else {
unifi_trace(priv, UDBG1, "%s: M4 received from netdevice\n", __FUNCTION__);
}
- func_exit();
return;
}
}
@@ -248,7 +241,6 @@
dataref1.length, dataref1.data,
dataref2.length, dataref2.data);
- func_exit();
} /* sme_log_event() */
@@ -1158,8 +1150,6 @@
CsrWifiMacAddress peer;
unsigned long flags;
- func_enter();
-
/* The peer address was stored in the signal */
spin_lock_irqsave(&priv->m4_lock, flags);
memcpy(peer.a, req->Ra.x, sizeof(peer.a));
@@ -1171,8 +1161,6 @@
unifi_trace(priv, UDBG1, "M4ReadyToSendInd sent for peer %pMF\n",
peer.a);
- func_exit();
-
} /* uf_send_m4_ready_wq() */
#if (defined(CSR_WIFI_SECURITY_WAPI_ENABLE) && defined(CSR_WIFI_SECURITY_WAPI_SW_ENCRYPTION))
@@ -1204,8 +1192,6 @@
if (interfacePriv->interfaceMode == CSR_WIFI_ROUTER_CTRL_MODE_STA) {
- func_enter();
-
pktBulkDataLength = interfacePriv->wapi_unicast_bulk_data.data_length;
if (pktBulkDataLength > 0) {
@@ -1231,7 +1217,6 @@
kfree(pktBulkData); /* Would have been copied over by the SME Handler */
- func_exit();
} else {
unifi_warning(priv, "uf_send_pkt_to_encrypt() is NOT applicable for interface mode - %d\n",interfacePriv->interfaceMode);
}
diff --git a/drivers/staging/csr/unifi_wext.h b/drivers/staging/csr/unifi_wext.h
index 6834c43..beba089 100644
--- a/drivers/staging/csr/unifi_wext.h
+++ b/drivers/staging/csr/unifi_wext.h
@@ -16,7 +16,6 @@
#define __LINUX_UNIFI_WEXT_H__ 1
#include <linux/kernel.h>
-#include <linux/version.h>
#include <net/iw_handler.h>
#include "csr_wifi_sme_prim.h"
diff --git a/drivers/staging/cxt1e1/musycc.c b/drivers/staging/cxt1e1/musycc.c
index ba721c6..b2cc68a 100644
--- a/drivers/staging/cxt1e1/musycc.c
+++ b/drivers/staging/cxt1e1/musycc.c
@@ -55,26 +55,26 @@
extern int max_rxdesc_used;
extern int max_txdesc_used;
extern ci_t *CI; /* dummy pointr to board ZEROE's data - DEBUG
- * USAGE */
+ * USAGE */
/*******************************************************************/
/* forward references */
-void c4_fifo_free (mpi_t *, int);
-void c4_wk_chan_restart (mch_t *);
-void musycc_bh_tx_eom (mpi_t *, int);
-int musycc_chan_up (ci_t *, int);
-status_t __init musycc_init (ci_t *);
-STATIC void __init musycc_init_port (mpi_t *);
-void musycc_intr_bh_tasklet (ci_t *);
-void musycc_serv_req (mpi_t *, u_int32_t);
-void musycc_update_timeslots (mpi_t *);
+void c4_fifo_free(mpi_t *, int);
+void c4_wk_chan_restart(mch_t *);
+void musycc_bh_tx_eom(mpi_t *, int);
+int musycc_chan_up(ci_t *, int);
+status_t __init musycc_init(ci_t *);
+STATIC void __init musycc_init_port(mpi_t *);
+void musycc_intr_bh_tasklet(ci_t *);
+void musycc_serv_req(mpi_t *, u_int32_t);
+void musycc_update_timeslots(mpi_t *);
/*******************************************************************/
#if 1
STATIC int
-musycc_dump_rxbuffer_ring (mch_t * ch, int lockit)
+musycc_dump_rxbuffer_ring(mch_t * ch, int lockit)
{
struct mdesc *m;
unsigned long flags = 0;
@@ -83,71 +83,64 @@
int n;
if (lockit)
- {
- spin_lock_irqsave (&ch->ch_rxlock, flags);
- }
+ spin_lock_irqsave(&ch->ch_rxlock, flags);
if (ch->rxd_num == 0)
- {
- pr_info(" ZERO receive buffers allocated for this channel.");
- } else
- {
- FLUSH_MEM_READ ();
- m = &ch->mdr[ch->rxix_irq_srv];
- for (n = ch->rxd_num; n; n--)
- {
- status = le32_to_cpu (m->status);
- {
- pr_info("%c %08lx[%2d]: sts %08x (%c%c%c%c:%d.) Data [%08x] Next [%08x]\n",
- (m == &ch->mdr[ch->rxix_irq_srv]) ? 'F' : ' ',
- (unsigned long) m, n,
- status,
- m->data ? (status & HOST_RX_OWNED ? 'H' : 'M') : '-',
- status & POLL_DISABLED ? 'P' : '-',
- status & EOBIRQ_ENABLE ? 'b' : '-',
- status & EOMIRQ_ENABLE ? 'm' : '-',
- status & LENGTH_MASK,
- le32_to_cpu (m->data), le32_to_cpu (m->next));
+ pr_info(" ZERO receive buffers allocated for this channel.");
+ else {
+ FLUSH_MEM_READ();
+ m = &ch->mdr[ch->rxix_irq_srv];
+ for (n = ch->rxd_num; n; n--) {
+ status = le32_to_cpu(m->status);
+ {
+ pr_info("%c %08lx[%2d]: sts %08x (%c%c%c%c:%d.) Data [%08x] Next [%08x]\n",
+ (m == &ch->mdr[ch->rxix_irq_srv]) ? 'F' : ' ',
+ (unsigned long) m, n,
+ status,
+ m->data ? (status & HOST_RX_OWNED ? 'H' : 'M') : '-',
+ status & POLL_DISABLED ? 'P' : '-',
+ status & EOBIRQ_ENABLE ? 'b' : '-',
+ status & EOMIRQ_ENABLE ? 'm' : '-',
+ status & LENGTH_MASK,
+ le32_to_cpu(m->data), le32_to_cpu(m->next));
#ifdef RLD_DUMP_BUFDATA
- {
- u_int32_t *dp;
- int len = status & LENGTH_MASK;
+ {
+ u_int32_t *dp;
+ int len = status & LENGTH_MASK;
#if 1
- if (m->data && (status & HOST_RX_OWNED))
+ if (m->data && (status & HOST_RX_OWNED))
#else
- if (m->data) /* always dump regardless of valid RX
- * data */
+ if (m->data) /* always dump regardless of valid RX
+ * data */
#endif
- {
- dp = (u_int32_t *) OS_phystov ((void *) (le32_to_cpu (m->data)));
- if (len >= 0x10)
- pr_info(" %x[%x]: %08X %08X %08X %08x\n", (u_int32_t) dp, len,
- *dp, *(dp + 1), *(dp + 2), *(dp + 3));
- else if (len >= 0x08)
- pr_info(" %x[%x]: %08X %08X\n", (u_int32_t) dp, len,
- *dp, *(dp + 1));
- else
- pr_info(" %x[%x]: %08X\n", (u_int32_t) dp, len, *dp);
- }
- }
+ {
+ dp = (u_int32_t *) OS_phystov((void *) (le32_to_cpu(m->data)));
+ if (len >= 0x10)
+ pr_info(" %x[%x]: %08X %08X %08X %08x\n", (u_int32_t) dp, len,
+ *dp, *(dp + 1), *(dp + 2), *(dp + 3));
+ else if (len >= 0x08)
+ pr_info(" %x[%x]: %08X %08X\n", (u_int32_t) dp, len,
+ *dp, *(dp + 1));
+ else
+ pr_info(" %x[%x]: %08X\n", (u_int32_t) dp, len, *dp);
+ }
+ }
#endif
- }
- m = m->snext;
- }
+ }
+ m = m->snext;
+ }
} /* -for- */
pr_info("\n");
if (lockit)
- {
- spin_unlock_irqrestore (&ch->ch_rxlock, flags);
- }
+ spin_unlock_irqrestore(&ch->ch_rxlock, flags);
return 0;
}
#endif
#if 1
STATIC int
-musycc_dump_txbuffer_ring (mch_t * ch, int lockit)
+musycc_dump_txbuffer_ring(mch_t * ch, int lockit)
{
struct mdesc *m;
unsigned long flags = 0;
@@ -155,60 +148,52 @@
int n;
if (lockit)
- {
- spin_lock_irqsave (&ch->ch_txlock, flags);
- }
+ spin_lock_irqsave(&ch->ch_txlock, flags);
if (ch->txd_num == 0)
- {
- pr_info(" ZERO transmit buffers allocated for this channel.");
- } else
- {
- FLUSH_MEM_READ ();
- m = ch->txd_irq_srv;
- for (n = ch->txd_num; n; n--)
- {
- status = le32_to_cpu (m->status);
- {
- pr_info("%c%c %08lx[%2d]: sts %08x (%c%c%c%c:%d.) Data [%08x] Next [%08x]\n",
- (m == ch->txd_usr_add) ? 'F' : ' ',
- (m == ch->txd_irq_srv) ? 'L' : ' ',
- (unsigned long) m, n,
- status,
- m->data ? (status & MUSYCC_TX_OWNED ? 'M' : 'H') : '-',
- status & POLL_DISABLED ? 'P' : '-',
- status & EOBIRQ_ENABLE ? 'b' : '-',
- status & EOMIRQ_ENABLE ? 'm' : '-',
- status & LENGTH_MASK,
- le32_to_cpu (m->data), le32_to_cpu (m->next));
+ pr_info(" ZERO transmit buffers allocated for this channel.");
+ else {
+ FLUSH_MEM_READ();
+ m = ch->txd_irq_srv;
+ for (n = ch->txd_num; n; n--) {
+ status = le32_to_cpu(m->status);
+ {
+ pr_info("%c%c %08lx[%2d]: sts %08x (%c%c%c%c:%d.) Data [%08x] Next [%08x]\n",
+ (m == ch->txd_usr_add) ? 'F' : ' ',
+ (m == ch->txd_irq_srv) ? 'L' : ' ',
+ (unsigned long) m, n,
+ status,
+ m->data ? (status & MUSYCC_TX_OWNED ? 'M' : 'H') : '-',
+ status & POLL_DISABLED ? 'P' : '-',
+ status & EOBIRQ_ENABLE ? 'b' : '-',
+ status & EOMIRQ_ENABLE ? 'm' : '-',
+ status & LENGTH_MASK,
+ le32_to_cpu(m->data), le32_to_cpu(m->next));
#ifdef RLD_DUMP_BUFDATA
- {
- u_int32_t *dp;
- int len = status & LENGTH_MASK;
+ {
+ u_int32_t *dp;
+ int len = status & LENGTH_MASK;
- if (m->data)
- {
- dp = (u_int32_t *) OS_phystov ((void *) (le32_to_cpu (m->data)));
- if (len >= 0x10)
- pr_info(" %x[%x]: %08X %08X %08X %08x\n", (u_int32_t) dp, len,
- *dp, *(dp + 1), *(dp + 2), *(dp + 3));
- else if (len >= 0x08)
- pr_info(" %x[%x]: %08X %08X\n", (u_int32_t) dp, len,
- *dp, *(dp + 1));
- else
- pr_info(" %x[%x]: %08X\n", (u_int32_t) dp, len, *dp);
- }
- }
+ if (m->data) {
+ dp = (u_int32_t *) OS_phystov((void *) (le32_to_cpu(m->data)));
+ if (len >= 0x10)
+ pr_info(" %x[%x]: %08X %08X %08X %08x\n", (u_int32_t) dp, len,
+ *dp, *(dp + 1), *(dp + 2), *(dp + 3));
+ else if (len >= 0x08)
+ pr_info(" %x[%x]: %08X %08X\n", (u_int32_t) dp, len,
+ *dp, *(dp + 1));
+ else
+ pr_info(" %x[%x]: %08X\n", (u_int32_t) dp, len, *dp);
+ }
+ }
#endif
- }
- m = m->snext;
- }
+ }
+ m = m->snext;
+ }
} /* -for- */
pr_info("\n");
if (lockit)
- {
- spin_unlock_irqrestore (&ch->ch_txlock, flags);
- }
+ spin_unlock_irqrestore(&ch->ch_txlock, flags);
return 0;
}
#endif
@@ -220,58 +205,55 @@
*/
status_t
-musycc_dump_ring (ci_t * ci, unsigned int chan)
+musycc_dump_ring(ci_t * ci, unsigned int chan)
{
mch_t *ch;
if (chan >= MAX_CHANS_USED)
+ return SBE_DRVR_FAIL; /* E2BIG */
{
- return SBE_DRVR_FAIL; /* E2BIG */
- }
- {
- int bh;
+ int bh;
- bh = atomic_read (&ci->bh_pending);
- pr_info(">> bh_pend %d [%d] ihead %d itail %d [%d] th_cnt %d bh_cnt %d wdcnt %d note %d\n",
- bh, max_bh, ci->iqp_headx, ci->iqp_tailx, max_intcnt,
- ci->intlog.drvr_intr_thcount,
- ci->intlog.drvr_intr_bhcount,
- ci->wdcount, ci->wd_notify);
- max_bh = 0; /* reset counter */
- max_intcnt = 0; /* reset counter */
+ bh = atomic_read(&ci->bh_pending);
+ pr_info(">> bh_pend %d [%d] ihead %d itail %d [%d] th_cnt %d bh_cnt %d wdcnt %d note %d\n",
+ bh, max_bh, ci->iqp_headx, ci->iqp_tailx, max_intcnt,
+ ci->intlog.drvr_intr_thcount,
+ ci->intlog.drvr_intr_bhcount,
+ ci->wdcount, ci->wd_notify);
+ max_bh = 0; /* reset counter */
+ max_intcnt = 0; /* reset counter */
}
- if (!(ch = sd_find_chan (dummy, chan)))
- {
- pr_info(">> musycc_dump_ring: channel %d not up.\n", chan);
- return ENOENT;
+ if (!(ch = sd_find_chan(dummy, chan))) {
+ pr_info(">> musycc_dump_ring: channel %d not up.\n", chan);
+ return ENOENT;
}
pr_info(">> CI %p CHANNEL %3d @ %p: state %x status/p %x/%x\n", ci, chan, ch, ch->state,
- ch->status, ch->p.status);
+ ch->status, ch->p.status);
pr_info("--------------------------------\nTX Buffer Ring - Channel %d, txd_num %d. (bd/ch pend %d %d), TXD required %d, txpkt %lu\n",
- chan, ch->txd_num,
- (u_int32_t) atomic_read (&ci->tx_pending), (u_int32_t) atomic_read (&ch->tx_pending), ch->txd_required, ch->s.tx_packets);
+ chan, ch->txd_num,
+ (u_int32_t) atomic_read(&ci->tx_pending), (u_int32_t) atomic_read(&ch->tx_pending), ch->txd_required, ch->s.tx_packets);
pr_info("++ User 0x%p IRQ_SRV 0x%p USR_ADD 0x%p QStopped %x, start_tx %x tx_full %d txd_free %d mode %x\n",
- ch->user, ch->txd_irq_srv, ch->txd_usr_add,
- sd_queue_stopped (ch->user),
- ch->ch_start_tx, ch->tx_full, ch->txd_free, ch->p.chan_mode);
- musycc_dump_txbuffer_ring (ch, 1);
+ ch->user, ch->txd_irq_srv, ch->txd_usr_add,
+ sd_queue_stopped(ch->user),
+ ch->ch_start_tx, ch->tx_full, ch->txd_free, ch->p.chan_mode);
+ musycc_dump_txbuffer_ring(ch, 1);
pr_info("RX Buffer Ring - Channel %d, rxd_num %d. IRQ_SRV[%d] 0x%p, start_rx %x rxpkt %lu\n",
- chan, ch->rxd_num, ch->rxix_irq_srv,
- &ch->mdr[ch->rxix_irq_srv], ch->ch_start_rx, ch->s.rx_packets);
- musycc_dump_rxbuffer_ring (ch, 1);
+ chan, ch->rxd_num, ch->rxix_irq_srv,
+ &ch->mdr[ch->rxix_irq_srv], ch->ch_start_rx, ch->s.rx_packets);
+ musycc_dump_rxbuffer_ring(ch, 1);
return SBE_DRVR_SUCCESS;
}
status_t
-musycc_dump_rings (ci_t * ci, unsigned int start_chan)
+musycc_dump_rings(ci_t * ci, unsigned int start_chan)
{
unsigned int chan;
for (chan = start_chan; chan < (start_chan + 5); chan++)
- musycc_dump_ring (ci, chan);
+ musycc_dump_ring(ci, chan);
return SBE_DRVR_SUCCESS;
}
@@ -282,7 +264,7 @@
*/
void
-musycc_init_mdt (mpi_t * pi)
+musycc_init_mdt(mpi_t * pi)
{
u_int32_t *addr, cfg;
int i;
@@ -299,56 +281,50 @@
cfg = CFG_CH_FLAG_7E << IDLE_CODE;
for (i = 0; i < 32; addr++, i++)
- {
- pci_write_32 (addr, cfg);
- }
+ pci_write_32(addr, cfg);
}
/* Set TX thp to the next unprocessed md */
void
-musycc_update_tx_thp (mch_t * ch)
+musycc_update_tx_thp(mch_t * ch)
{
struct mdesc *md;
unsigned long flags;
- spin_lock_irqsave (&ch->ch_txlock, flags);
- while (1)
- {
- md = ch->txd_irq_srv;
- FLUSH_MEM_READ ();
- if (!md->data)
- {
- /* No MDs with buffers to process */
- spin_unlock_irqrestore (&ch->ch_txlock, flags);
- return;
- }
- if ((le32_to_cpu (md->status)) & MUSYCC_TX_OWNED)
- {
- /* this is the MD to restart TX with */
- break;
- }
- /*
- * Otherwise, we have a valid, host-owned message descriptor which
- * has been successfully transmitted and whose buffer can be freed,
- * so... process this MD, it's owned by the host. (This might give
- * as a new, updated txd_irq_srv.)
- */
- musycc_bh_tx_eom (ch->up, ch->gchan);
+ spin_lock_irqsave(&ch->ch_txlock, flags);
+ while (1) {
+ md = ch->txd_irq_srv;
+ FLUSH_MEM_READ();
+ if (!md->data) {
+ /* No MDs with buffers to process */
+ spin_unlock_irqrestore(&ch->ch_txlock, flags);
+ return;
+ }
+ if ((le32_to_cpu(md->status)) & MUSYCC_TX_OWNED) {
+ /* this is the MD to restart TX with */
+ break;
+ }
+ /*
+ * Otherwise, we have a valid, host-owned message descriptor which
+ * has been successfully transmitted and whose buffer can be freed,
+ * so... process this MD, it's owned by the host. (This might give
+ * as a new, updated txd_irq_srv.)
+ */
+ musycc_bh_tx_eom(ch->up, ch->gchan);
}
md = ch->txd_irq_srv;
- ch->up->regram->thp[ch->gchan] = cpu_to_le32 (OS_vtophys (md));
- FLUSH_MEM_WRITE ();
+ ch->up->regram->thp[ch->gchan] = cpu_to_le32(OS_vtophys(md));
+ FLUSH_MEM_WRITE();
- if (ch->tx_full)
- {
- ch->tx_full = 0;
- ch->txd_required = 0;
- sd_enable_xmit (ch->user); /* re-enable to catch flow controlled
- * channel */
+ if (ch->tx_full) {
+ ch->tx_full = 0;
+ ch->txd_required = 0;
+ sd_enable_xmit(ch->user); /* re-enable to catch flow controlled
+ * channel */
}
- spin_unlock_irqrestore (&ch->ch_txlock, flags);
+ spin_unlock_irqrestore(&ch->ch_txlock, flags);
#ifdef RLD_TRANS_DEBUG
pr_info("++ musycc_update_tx_thp[%d]: setting thp = %p, sts %x\n", ch->channum, md, md->status);
@@ -366,7 +342,7 @@
*/
void
-musycc_wq_chan_restart (void *arg) /* channel private structure */
+musycc_wq_chan_restart(void *arg) /* channel private structure */
{
mch_t *ch;
mpi_t *pi;
@@ -380,7 +356,7 @@
#ifdef RLD_TRANS_DEBUG
pr_info("wq_chan_restart[%d]: start_RT[%d/%d] status %x\n",
- ch->channum, ch->ch_start_rx, ch->ch_start_tx, ch->status);
+ ch->channum, ch->ch_start_rx, ch->ch_start_tx, ch->status);
#endif
@@ -388,80 +364,74 @@
/** check for RX restart request **/
/**********************************/
- if ((ch->ch_start_rx) && (ch->status & RX_ENABLED))
- {
+ if ((ch->ch_start_rx) && (ch->status & RX_ENABLED)) {
- ch->ch_start_rx = 0;
+ ch->ch_start_rx = 0;
#if defined(RLD_TRANS_DEBUG) || defined(RLD_RXACT_DEBUG)
- {
- static int hereb4 = 7;
+ {
+ static int hereb4 = 7;
- if (hereb4) /* RLD DEBUG */
- {
- hereb4--;
+ if (hereb4) { /* RLD DEBUG */
+ hereb4--;
#ifdef RLD_TRANS_DEBUG
- md = &ch->mdr[ch->rxix_irq_srv];
- pr_info("++ musycc_wq_chan_restart[%d] CHAN RX ACTIVATE: rxix_irq_srv %d, md %p sts %x, rxpkt %lu\n",
- ch->channum, ch->rxix_irq_srv, md, le32_to_cpu (md->status),
- ch->s.rx_packets);
+ md = &ch->mdr[ch->rxix_irq_srv];
+ pr_info("++ musycc_wq_chan_restart[%d] CHAN RX ACTIVATE: rxix_irq_srv %d, md %p sts %x, rxpkt %lu\n",
+ ch->channum, ch->rxix_irq_srv, md, le32_to_cpu(md->status),
+ ch->s.rx_packets);
#elif defined(RLD_RXACT_DEBUG)
- md = &ch->mdr[ch->rxix_irq_srv];
- pr_info("++ musycc_wq_chan_restart[%d] CHAN RX ACTIVATE: rxix_irq_srv %d, md %p sts %x, rxpkt %lu\n",
- ch->channum, ch->rxix_irq_srv, md, le32_to_cpu (md->status),
- ch->s.rx_packets);
- musycc_dump_rxbuffer_ring (ch, 1); /* RLD DEBUG */
+ md = &ch->mdr[ch->rxix_irq_srv];
+ pr_info("++ musycc_wq_chan_restart[%d] CHAN RX ACTIVATE: rxix_irq_srv %d, md %p sts %x, rxpkt %lu\n",
+ ch->channum, ch->rxix_irq_srv, md, le32_to_cpu(md->status),
+ ch->s.rx_packets);
+ musycc_dump_rxbuffer_ring(ch, 1); /* RLD DEBUG */
#endif
- }
- }
+ }
+ }
#endif
- musycc_serv_req (pi, SR_CHANNEL_ACTIVATE | SR_RX_DIRECTION | ch->gchan);
+ musycc_serv_req(pi, SR_CHANNEL_ACTIVATE | SR_RX_DIRECTION | ch->gchan);
}
/**********************************/
/** check for TX restart request **/
/**********************************/
- if ((ch->ch_start_tx) && (ch->status & TX_ENABLED))
- {
- /* find next unprocessed message, then set TX thp to it */
- musycc_update_tx_thp (ch);
+ if ((ch->ch_start_tx) && (ch->status & TX_ENABLED)) {
+ /* find next unprocessed message, then set TX thp to it */
+ musycc_update_tx_thp(ch);
#if 0
- spin_lock_irqsave (&ch->ch_txlock, flags);
+ spin_lock_irqsave(&ch->ch_txlock, flags);
#endif
- md = ch->txd_irq_srv;
- if (!md)
- {
+ md = ch->txd_irq_srv;
+ if (!md) {
#ifdef RLD_TRANS_DEBUG
- pr_info("-- musycc_wq_chan_restart[%d]: WARNING, starting NULL md\n", ch->channum);
+ pr_info("-- musycc_wq_chan_restart[%d]: WARNING, starting NULL md\n", ch->channum);
#endif
#if 0
- spin_unlock_irqrestore (&ch->ch_txlock, flags);
+ spin_unlock_irqrestore(&ch->ch_txlock, flags);
#endif
- } else if (md->data && ((le32_to_cpu (md->status)) & MUSYCC_TX_OWNED))
- {
- ch->ch_start_tx = 0;
+ } else if (md->data && ((le32_to_cpu(md->status)) & MUSYCC_TX_OWNED)) {
+ ch->ch_start_tx = 0;
#if 0
- spin_unlock_irqrestore (&ch->ch_txlock, flags); /* allow interrupts for service request */
+ spin_unlock_irqrestore(&ch->ch_txlock, flags); /* allow interrupts for service request */
#endif
#ifdef RLD_TRANS_DEBUG
- pr_info("++ musycc_wq_chan_restart() CHAN TX ACTIVATE: chan %d txd_irq_srv %p = sts %x, txpkt %lu\n",
- ch->channum, ch->txd_irq_srv, ch->txd_irq_srv->status, ch->s.tx_packets);
+ pr_info("++ musycc_wq_chan_restart() CHAN TX ACTIVATE: chan %d txd_irq_srv %p = sts %x, txpkt %lu\n",
+ ch->channum, ch->txd_irq_srv, ch->txd_irq_srv->status, ch->s.tx_packets);
#endif
- musycc_serv_req (pi, SR_CHANNEL_ACTIVATE | SR_TX_DIRECTION | ch->gchan);
- }
+ musycc_serv_req(pi, SR_CHANNEL_ACTIVATE | SR_TX_DIRECTION | ch->gchan);
+ }
#ifdef RLD_RESTART_DEBUG
- else
- {
- /* retain request to start until retried and we have data to xmit */
- pr_info("-- musycc_wq_chan_restart[%d]: DELAYED due to md %p sts %x data %x, start_tx %x\n",
- ch->channum, md,
- le32_to_cpu (md->status),
- le32_to_cpu (md->data), ch->ch_start_tx);
- musycc_dump_txbuffer_ring (ch, 0);
+ else {
+ /* retain request to start until retried and we have data to xmit */
+ pr_info("-- musycc_wq_chan_restart[%d]: DELAYED due to md %p sts %x data %x, start_tx %x\n",
+ ch->channum, md,
+ le32_to_cpu(md->status),
+ le32_to_cpu(md->data), ch->ch_start_tx);
+ musycc_dump_txbuffer_ring(ch, 0);
#if 0
- spin_unlock_irqrestore (&ch->ch_txlock, flags); /* allow interrupts for service request */
+ spin_unlock_irqrestore(&ch->ch_txlock, flags); /* allow interrupts for service request */
#endif
- }
+ }
#endif
}
}
@@ -473,41 +443,41 @@
*/
void
-musycc_chan_restart (mch_t * ch)
+musycc_chan_restart(mch_t * ch)
{
#ifdef RLD_RESTART_DEBUG
pr_info("++ musycc_chan_restart[%d]: txd_irq_srv @ %p = sts %x\n",
- ch->channum, ch->txd_irq_srv, ch->txd_irq_srv->status);
+ ch->channum, ch->txd_irq_srv, ch->txd_irq_srv->status);
#endif
/* 2.6 - find next unprocessed message, then set TX thp to it */
#ifdef RLD_RESTART_DEBUG
pr_info(">> musycc_chan_restart: scheduling Chan %x workQ @ %p\n", ch->channum, &ch->ch_work);
#endif
- c4_wk_chan_restart (ch); /* work queue mechanism fires off: Ref:
- * musycc_wq_chan_restart () */
+ c4_wk_chan_restart(ch); /* work queue mechanism fires off: Ref:
+ * musycc_wq_chan_restart () */
}
void
-rld_put_led (mpi_t * pi, u_int32_t ledval)
+rld_put_led(mpi_t * pi, u_int32_t ledval)
{
static u_int32_t led = 0;
if (ledval == 0)
- led = 0;
+ led = 0;
else
- led |= ledval;
+ led |= ledval;
- pci_write_32 ((u_int32_t *) &pi->up->cpldbase->leds, led); /* RLD DEBUG TRANHANG */
+ pci_write_32((u_int32_t *) &pi->up->cpldbase->leds, led); /* RLD DEBUG TRANHANG */
}
#define MUSYCC_SR_RETRY_CNT 9
void
-musycc_serv_req (mpi_t * pi, u_int32_t req)
+musycc_serv_req(mpi_t * pi, u_int32_t req)
{
volatile u_int32_t r;
int rcnt;
@@ -520,49 +490,46 @@
* acknowledged."
*/
- SD_SEM_TAKE (&pi->sr_sem_busy, "serv"); /* only 1 thru here, per
- * group */
+ SD_SEM_TAKE(&pi->sr_sem_busy, "serv"); /* only 1 thru here, per
+ * group */
- if (pi->sr_last == req)
- {
+ if (pi->sr_last == req) {
#ifdef RLD_TRANS_DEBUG
- pr_info(">> same SR, Port %d Req %x\n", pi->portnum, req);
+ pr_info(">> same SR, Port %d Req %x\n", pi->portnum, req);
#endif
- /*
- * The most likely repeated request is the channel activation command
- * which follows the occurrence of a Transparent mode TX ONR or a
- * BUFF error. If the previous command was a CHANNEL ACTIVATE,
- * precede it with a NOOP command in order maintain coherent control
- * of this current (re)ACTIVATE.
- */
+ /*
+ * The most likely repeated request is the channel activation command
+ * which follows the occurrence of a Transparent mode TX ONR or a
+ * BUFF error. If the previous command was a CHANNEL ACTIVATE,
+ * precede it with a NOOP command in order maintain coherent control
+ * of this current (re)ACTIVATE.
+ */
- r = (pi->sr_last & ~SR_GCHANNEL_MASK);
- if ((r == (SR_CHANNEL_ACTIVATE | SR_TX_DIRECTION)) ||
- (r == (SR_CHANNEL_ACTIVATE | SR_RX_DIRECTION)))
- {
+ r = (pi->sr_last & ~SR_GCHANNEL_MASK);
+ if ((r == (SR_CHANNEL_ACTIVATE | SR_TX_DIRECTION)) ||
+ (r == (SR_CHANNEL_ACTIVATE | SR_RX_DIRECTION))) {
#ifdef RLD_TRANS_DEBUG
- pr_info(">> same CHAN ACT SR, Port %d Req %x => issue SR_NOOP CMD\n", pi->portnum, req);
+ pr_info(">> same CHAN ACT SR, Port %d Req %x => issue SR_NOOP CMD\n", pi->portnum, req);
#endif
- SD_SEM_GIVE (&pi->sr_sem_busy); /* allow this next request */
- musycc_serv_req (pi, SR_NOOP);
- SD_SEM_TAKE (&pi->sr_sem_busy, "serv"); /* relock & continue w/
- * original req */
- } else if (req == SR_NOOP)
- {
- /* no need to issue back-to-back SR_NOOP commands at this time */
+ SD_SEM_GIVE(&pi->sr_sem_busy); /* allow this next request */
+ musycc_serv_req(pi, SR_NOOP);
+ SD_SEM_TAKE(&pi->sr_sem_busy, "serv"); /* relock & continue w/
+ * original req */
+ } else if (req == SR_NOOP) {
+ /* no need to issue back-to-back SR_NOOP commands at this time */
#ifdef RLD_TRANS_DEBUG
- pr_info(">> same Port SR_NOOP skipped, Port %d\n", pi->portnum);
+ pr_info(">> same Port SR_NOOP skipped, Port %d\n", pi->portnum);
#endif
- SD_SEM_GIVE (&pi->sr_sem_busy); /* allow this next request */
- return;
- }
+ SD_SEM_GIVE(&pi->sr_sem_busy); /* allow this next request */
+ return;
+ }
}
rcnt = 0;
pi->sr_last = req;
rewrite:
- pci_write_32 ((u_int32_t *) &pi->reg->srd, req);
- FLUSH_MEM_WRITE ();
+ pci_write_32((u_int32_t *) &pi->reg->srd, req);
+ FLUSH_MEM_WRITE();
/*
* Per MUSYCC Manual, Section 6.1,2 - "When writing an SCR service
@@ -572,120 +539,108 @@
* the host follow any SCR write with another operation which reads from
* the same address."
*/
- r = pci_read_32 ((u_int32_t *) &pi->reg->srd); /* adhere to write
- * timing imposition */
+ r = pci_read_32((u_int32_t *) &pi->reg->srd); /* adhere to write
+ * timing imposition */
- if ((r != req) && (req != SR_CHIP_RESET) && (++rcnt <= MUSYCC_SR_RETRY_CNT))
- {
- if (cxt1e1_log_level >= LOG_MONITOR)
- pr_info("%s: %d - reissue srv req/last %x/%x (hdw reads %x), Chan %d.\n",
- pi->up->devname, rcnt, req, pi->sr_last, r,
- (pi->portnum * MUSYCC_NCHANS) + (req & 0x1f));
- OS_uwait_dummy (); /* this delay helps reduce reissue counts
- * (reason not yet researched) */
- goto rewrite;
+ if ((r != req) && (req != SR_CHIP_RESET) && (++rcnt <= MUSYCC_SR_RETRY_CNT)) {
+ if (cxt1e1_log_level >= LOG_MONITOR)
+ pr_info("%s: %d - reissue srv req/last %x/%x (hdw reads %x), Chan %d.\n",
+ pi->up->devname, rcnt, req, pi->sr_last, r,
+ (pi->portnum * MUSYCC_NCHANS) + (req & 0x1f));
+ OS_uwait_dummy(); /* this delay helps reduce reissue counts
+ * (reason not yet researched) */
+ goto rewrite;
}
- if (rcnt > MUSYCC_SR_RETRY_CNT)
- {
- pr_warning("%s: failed service request (#%d)= %x, group %d.\n",
- pi->up->devname, MUSYCC_SR_RETRY_CNT, req, pi->portnum);
- SD_SEM_GIVE (&pi->sr_sem_busy); /* allow any next request */
- return;
+ if (rcnt > MUSYCC_SR_RETRY_CNT) {
+ pr_warning("%s: failed service request (#%d)= %x, group %d.\n",
+ pi->up->devname, MUSYCC_SR_RETRY_CNT, req, pi->portnum);
+ SD_SEM_GIVE(&pi->sr_sem_busy); /* allow any next request */
+ return;
}
- if (req == SR_CHIP_RESET)
- {
- /*
- * PORT NOTE: the CHIP_RESET command is NOT ack'd by the MUSYCC, thus
- * the upcoming delay is used. Though the MUSYCC documentation
- * suggests a read-after-write would supply the required delay, it's
- * unclear what CPU/BUS clock speeds might have been assumed when
- * suggesting this 'lack of ACK' workaround. Thus the use of uwait.
- */
- OS_uwait (100000, "icard"); /* 100ms */
- } else
- {
- FLUSH_MEM_READ ();
- SD_SEM_TAKE (&pi->sr_sem_wait, "sakack"); /* sleep until SACK
- * interrupt occurs */
+ if (req == SR_CHIP_RESET) {
+ /*
+ * PORT NOTE: the CHIP_RESET command is NOT ack'd by the MUSYCC, thus
+ * the upcoming delay is used. Though the MUSYCC documentation
+ * suggests a read-after-write would supply the required delay, it's
+ * unclear what CPU/BUS clock speeds might have been assumed when
+ * suggesting this 'lack of ACK' workaround. Thus the use of uwait.
+ */
+ OS_uwait(100000, "icard"); /* 100ms */
+ } else {
+ FLUSH_MEM_READ();
+ SD_SEM_TAKE(&pi->sr_sem_wait, "sakack"); /* sleep until SACK
+ * interrupt occurs */
}
- SD_SEM_GIVE (&pi->sr_sem_busy); /* allow any next request */
+ SD_SEM_GIVE(&pi->sr_sem_busy); /* allow any next request */
}
#ifdef SBE_PMCC4_ENABLE
void
-musycc_update_timeslots (mpi_t * pi)
+musycc_update_timeslots(mpi_t * pi)
{
int i, ch;
- char e1mode = IS_FRAME_ANY_E1 (pi->p.port_mode);
+ char e1mode = IS_FRAME_ANY_E1(pi->p.port_mode);
- for (i = 0; i < 32; i++)
- {
- int usedby = 0, last = 0, ts, j, bits[8];
+ for (i = 0; i < 32; i++) {
+ int usedby = 0, last = 0, ts, j, bits[8];
- u_int8_t lastval = 0;
+ u_int8_t lastval = 0;
- if (((i == 0) && e1mode) || /* disable if E1 mode */
- ((i == 16) && ((pi->p.port_mode == CFG_FRAME_E1CRC_CAS) || (pi->p.port_mode == CFG_FRAME_E1CRC_CAS_AMI)))
- || ((i > 23) && (!e1mode))) /* disable if T1 mode */
- {
- pi->tsm[i] = 0xff; /* make tslot unavailable for this mode */
- } else
- {
- pi->tsm[i] = 0x00; /* make tslot available for assignment */
- }
- for (j = 0; j < 8; j++)
- bits[j] = -1;
- for (ch = 0; ch < MUSYCC_NCHANS; ch++)
- {
- if ((pi->chan[ch]->state == UP) && (pi->chan[ch]->p.bitmask[i]))
- {
- usedby++;
- last = ch;
- lastval = pi->chan[ch]->p.bitmask[i];
- for (j = 0; j < 8; j++)
- if (lastval & (1 << j))
- bits[j] = ch;
- pi->tsm[i] |= lastval;
- }
- }
- if (!usedby)
- ts = 0;
- else if ((usedby == 1) && (lastval == 0xff))
- ts = (4 << 5) | last;
- else if ((usedby == 1) && (lastval == 0x7f))
- ts = (5 << 5) | last;
- else
- {
- int idx;
+ if (((i == 0) && e1mode) || /* disable if E1 mode */
+ ((i == 16) && ((pi->p.port_mode == CFG_FRAME_E1CRC_CAS) || (pi->p.port_mode == CFG_FRAME_E1CRC_CAS_AMI)))
+ || ((i > 23) && (!e1mode))) /* disable if T1 mode */
+ pi->tsm[i] = 0xff; /* make tslot unavailable for this mode */
+ else
+ pi->tsm[i] = 0x00; /* make tslot available for assignment */
+ for (j = 0; j < 8; j++)
+ bits[j] = -1;
+ for (ch = 0; ch < MUSYCC_NCHANS; ch++) {
+ if ((pi->chan[ch]->state == UP) && (pi->chan[ch]->p.bitmask[i])) {
+ usedby++;
+ last = ch;
+ lastval = pi->chan[ch]->p.bitmask[i];
+ for (j = 0; j < 8; j++)
+ if (lastval & (1 << j))
+ bits[j] = ch;
+ pi->tsm[i] |= lastval;
+ }
+ }
+ if (!usedby)
+ ts = 0;
+ else if ((usedby == 1) && (lastval == 0xff))
+ ts = (4 << 5) | last;
+ else if ((usedby == 1) && (lastval == 0x7f))
+ ts = (5 << 5) | last;
+ else {
+ int idx;
- if (bits[0] < 0)
- ts = (6 << 5) | (idx = last);
- else
- ts = (7 << 5) | (idx = bits[0]);
- for (j = 1; j < 8; j++)
- {
- pi->regram->rscm[idx * 8 + j] = (bits[j] < 0) ? 0 : (0x80 | bits[j]);
- pi->regram->tscm[idx * 8 + j] = (bits[j] < 0) ? 0 : (0x80 | bits[j]);
- }
- }
- pi->regram->rtsm[i] = ts;
- pi->regram->ttsm[i] = ts;
+ if (bits[0] < 0)
+ ts = (6 << 5) | (idx = last);
+ else
+ ts = (7 << 5) | (idx = bits[0]);
+ for (j = 1; j < 8; j++) {
+ pi->regram->rscm[idx * 8 + j] = (bits[j] < 0) ? 0 : (0x80 | bits[j]);
+ pi->regram->tscm[idx * 8 + j] = (bits[j] < 0) ? 0 : (0x80 | bits[j]);
+ }
+ }
+ pi->regram->rtsm[i] = ts;
+ pi->regram->ttsm[i] = ts;
}
- FLUSH_MEM_WRITE ();
+ FLUSH_MEM_WRITE();
- musycc_serv_req (pi, SR_TIMESLOT_MAP | SR_RX_DIRECTION);
- musycc_serv_req (pi, SR_TIMESLOT_MAP | SR_TX_DIRECTION);
- musycc_serv_req (pi, SR_SUBCHANNEL_MAP | SR_RX_DIRECTION);
- musycc_serv_req (pi, SR_SUBCHANNEL_MAP | SR_TX_DIRECTION);
+ musycc_serv_req(pi, SR_TIMESLOT_MAP | SR_RX_DIRECTION);
+ musycc_serv_req(pi, SR_TIMESLOT_MAP | SR_TX_DIRECTION);
+ musycc_serv_req(pi, SR_SUBCHANNEL_MAP | SR_RX_DIRECTION);
+ musycc_serv_req(pi, SR_SUBCHANNEL_MAP | SR_TX_DIRECTION);
}
#endif
#ifdef SBE_WAN256T3_ENABLE
void
-musycc_update_timeslots (mpi_t * pi)
+musycc_update_timeslots(mpi_t * pi)
{
mch_t *ch;
@@ -699,21 +654,20 @@
#ifdef SBE_WAN256T3_ENABLE
hmask = (0x1f << hyperdummy) & 0x1f;
#endif
- for (i = 0; i < 128; i++)
- {
- gchan = ((pi->portnum * MUSYCC_NCHANS) + (i & hmask)) % MUSYCC_NCHANS;
- ch = pi->chan[gchan];
- if (ch->p.mode_56k)
- tsen = MODE_56KBPS;
- else
- tsen = MODE_64KBPS; /* also the default */
- ts = ((pi->portnum % 4) == (i / 32)) ? (tsen << 5) | (i & hmask) : 0;
- pi->regram->rtsm[i] = ts;
- pi->regram->ttsm[i] = ts;
+ for (i = 0; i < 128; i++) {
+ gchan = ((pi->portnum * MUSYCC_NCHANS) + (i & hmask)) % MUSYCC_NCHANS;
+ ch = pi->chan[gchan];
+ if (ch->p.mode_56k)
+ tsen = MODE_56KBPS;
+ else
+ tsen = MODE_64KBPS; /* also the default */
+ ts = ((pi->portnum % 4) == (i / 32)) ? (tsen << 5) | (i & hmask) : 0;
+ pi->regram->rtsm[i] = ts;
+ pi->regram->ttsm[i] = ts;
}
- FLUSH_MEM_WRITE ();
- musycc_serv_req (pi, SR_TIMESLOT_MAP | SR_RX_DIRECTION);
- musycc_serv_req (pi, SR_TIMESLOT_MAP | SR_TX_DIRECTION);
+ FLUSH_MEM_WRITE();
+ musycc_serv_req(pi, SR_TIMESLOT_MAP | SR_RX_DIRECTION);
+ musycc_serv_req(pi, SR_TIMESLOT_MAP | SR_TX_DIRECTION);
}
#endif
@@ -723,26 +677,25 @@
* into a hardware specific register value (IE. MUSYCC CCD Register).
*/
u_int32_t
-musycc_chan_proto (int proto)
+musycc_chan_proto(int proto)
{
int reg;
- switch (proto)
- {
+ switch (proto) {
case CFG_CH_PROTO_TRANS: /* 0 */
- reg = MUSYCC_CCD_TRANS;
- break;
+ reg = MUSYCC_CCD_TRANS;
+ break;
case CFG_CH_PROTO_SS7: /* 1 */
- reg = MUSYCC_CCD_SS7;
- break;
+ reg = MUSYCC_CCD_SS7;
+ break;
default:
case CFG_CH_PROTO_ISLP_MODE: /* 4 */
case CFG_CH_PROTO_HDLC_FCS16: /* 2 */
- reg = MUSYCC_CCD_HDLC_FCS16;
- break;
+ reg = MUSYCC_CCD_HDLC_FCS16;
+ break;
case CFG_CH_PROTO_HDLC_FCS32: /* 3 */
- reg = MUSYCC_CCD_HDLC_FCS32;
- break;
+ reg = MUSYCC_CCD_HDLC_FCS32;
+ break;
}
return reg;
@@ -750,46 +703,46 @@
#ifdef SBE_WAN256T3_ENABLE
STATIC void __init
-musycc_init_port (mpi_t * pi)
+musycc_init_port(mpi_t * pi)
{
- pci_write_32 ((u_int32_t *) &pi->reg->gbp, OS_vtophys (pi->regram));
+ pci_write_32((u_int32_t *) &pi->reg->gbp, OS_vtophys(pi->regram));
pi->regram->grcd =
- __constant_cpu_to_le32 (MUSYCC_GRCD_RX_ENABLE |
- MUSYCC_GRCD_TX_ENABLE |
- MUSYCC_GRCD_SF_ALIGN |
- MUSYCC_GRCD_SUBCHAN_DISABLE |
- MUSYCC_GRCD_OOFMP_DISABLE |
- MUSYCC_GRCD_COFAIRQ_DISABLE |
- MUSYCC_GRCD_MC_ENABLE |
- (MUSYCC_GRCD_POLLTH_32 << MUSYCC_GRCD_POLLTH_SHIFT));
+ __constant_cpu_to_le32(MUSYCC_GRCD_RX_ENABLE |
+ MUSYCC_GRCD_TX_ENABLE |
+ MUSYCC_GRCD_SF_ALIGN |
+ MUSYCC_GRCD_SUBCHAN_DISABLE |
+ MUSYCC_GRCD_OOFMP_DISABLE |
+ MUSYCC_GRCD_COFAIRQ_DISABLE |
+ MUSYCC_GRCD_MC_ENABLE |
+ (MUSYCC_GRCD_POLLTH_32 << MUSYCC_GRCD_POLLTH_SHIFT));
pi->regram->pcd =
- __constant_cpu_to_le32 (MUSYCC_PCD_E1X4_MODE |
- MUSYCC_PCD_TXDATA_RISING |
- MUSYCC_PCD_TX_DRIVEN);
+ __constant_cpu_to_le32(MUSYCC_PCD_E1X4_MODE |
+ MUSYCC_PCD_TXDATA_RISING |
+ MUSYCC_PCD_TX_DRIVEN);
/* Message length descriptor */
- pi->regram->mld = __constant_cpu_to_le32 (cxt1e1_max_mru | (cxt1e1_max_mru << 16));
- FLUSH_MEM_WRITE ();
+ pi->regram->mld = __constant_cpu_to_le32(cxt1e1_max_mru | (cxt1e1_max_mru << 16));
+ FLUSH_MEM_WRITE();
- musycc_serv_req (pi, SR_GROUP_INIT | SR_RX_DIRECTION);
- musycc_serv_req (pi, SR_GROUP_INIT | SR_TX_DIRECTION);
+ musycc_serv_req(pi, SR_GROUP_INIT | SR_RX_DIRECTION);
+ musycc_serv_req(pi, SR_GROUP_INIT | SR_TX_DIRECTION);
- musycc_init_mdt (pi);
+ musycc_init_mdt(pi);
- musycc_update_timeslots (pi);
+ musycc_update_timeslots(pi);
}
#endif
status_t __init
-musycc_init (ci_t * ci)
+musycc_init(ci_t * ci)
{
char *regaddr; /* temp for address boundary calculations */
int i, gchan;
- OS_sem_init (&ci->sem_wdbusy, SEM_AVAILABLE); /* watchdog exclusion */
+ OS_sem_init(&ci->sem_wdbusy, SEM_AVAILABLE); /* watchdog exclusion */
/*
* Per MUSYCC manual, Section 6.3.4 - "The host must allocate a dword
@@ -798,87 +751,80 @@
#define INT_QUEUE_BOUNDARY 4
- regaddr = OS_kmalloc ((INT_QUEUE_SIZE + 1) * sizeof (u_int32_t));
+ regaddr = OS_kmalloc((INT_QUEUE_SIZE + 1) * sizeof(u_int32_t));
if (regaddr == 0)
- return ENOMEM;
+ return ENOMEM;
ci->iqd_p_saved = regaddr; /* save orig value for free's usage */
ci->iqd_p = (u_int32_t *) ((unsigned long) (regaddr + INT_QUEUE_BOUNDARY - 1) &
- (~(INT_QUEUE_BOUNDARY - 1))); /* this calculates
- * closest boundary */
+ (~(INT_QUEUE_BOUNDARY - 1))); /* this calculates
+ * closest boundary */
for (i = 0; i < INT_QUEUE_SIZE; i++)
- {
- ci->iqd_p[i] = __constant_cpu_to_le32 (INT_EMPTY_ENTRY);
- }
+ ci->iqd_p[i] = __constant_cpu_to_le32(INT_EMPTY_ENTRY);
- for (i = 0; i < ci->max_port; i++)
- {
- mpi_t *pi = &ci->port[i];
+ for (i = 0; i < ci->max_port; i++) {
+ mpi_t *pi = &ci->port[i];
- /*
- * Per MUSYCC manual, Section 6.3.2 - "The host must allocate a 2KB
- * bound memory segment for Channel Group 0."
- */
+ /*
+ * Per MUSYCC manual, Section 6.3.2 - "The host must allocate a 2KB
+ * bound memory segment for Channel Group 0."
+ */
#define GROUP_BOUNDARY 0x800
- regaddr = OS_kmalloc (sizeof (struct musycc_groupr) + GROUP_BOUNDARY);
- if (regaddr == 0)
- {
- for (gchan = 0; gchan < i; gchan++)
- {
- pi = &ci->port[gchan];
- OS_kfree (pi->reg);
- pi->reg = 0;
- }
- return ENOMEM;
- }
- pi->regram_saved = regaddr; /* save orig value for free's usage */
- pi->regram = (struct musycc_groupr *) ((unsigned long) (regaddr + GROUP_BOUNDARY - 1) &
- (~(GROUP_BOUNDARY - 1))); /* this calculates
- * closest boundary */
+ regaddr = OS_kmalloc(sizeof(struct musycc_groupr) + GROUP_BOUNDARY);
+ if (regaddr == 0) {
+ for (gchan = 0; gchan < i; gchan++) {
+ pi = &ci->port[gchan];
+ OS_kfree(pi->reg);
+ pi->reg = 0;
+ }
+ return ENOMEM;
+ }
+ pi->regram_saved = regaddr; /* save orig value for free's usage */
+ pi->regram = (struct musycc_groupr *) ((unsigned long) (regaddr + GROUP_BOUNDARY - 1) &
+ (~(GROUP_BOUNDARY - 1))); /* this calculates
+ * closest boundary */
}
/* any board centric MUSYCC commands will use group ZERO as its "home" */
ci->regram = ci->port[0].regram;
- musycc_serv_req (&ci->port[0], SR_CHIP_RESET);
+ musycc_serv_req(&ci->port[0], SR_CHIP_RESET);
- pci_write_32 ((u_int32_t *) &ci->reg->gbp, OS_vtophys (ci->regram));
- pci_flush_write (ci);
+ pci_write_32((u_int32_t *) &ci->reg->gbp, OS_vtophys(ci->regram));
+ pci_flush_write(ci);
#ifdef CONFIG_SBE_PMCC4_NCOMM
- ci->regram->__glcd = __constant_cpu_to_le32 (GCD_MAGIC);
+ ci->regram->__glcd = __constant_cpu_to_le32(GCD_MAGIC);
#else
/* standard driver POLLS for INTB via CPLD register */
- ci->regram->__glcd = __constant_cpu_to_le32 (GCD_MAGIC | MUSYCC_GCD_INTB_DISABLE);
+ ci->regram->__glcd = __constant_cpu_to_le32(GCD_MAGIC | MUSYCC_GCD_INTB_DISABLE);
#endif
- ci->regram->__iqp = cpu_to_le32 (OS_vtophys (&ci->iqd_p[0]));
- ci->regram->__iql = __constant_cpu_to_le32 (INT_QUEUE_SIZE - 1);
- pci_write_32 ((u_int32_t *) &ci->reg->dacbp, 0);
- FLUSH_MEM_WRITE ();
+ ci->regram->__iqp = cpu_to_le32(OS_vtophys(&ci->iqd_p[0]));
+ ci->regram->__iql = __constant_cpu_to_le32(INT_QUEUE_SIZE - 1);
+ pci_write_32((u_int32_t *) &ci->reg->dacbp, 0);
+ FLUSH_MEM_WRITE();
ci->state = C_RUNNING; /* mark as full interrupt processing
- * available */
+ * available */
- musycc_serv_req (&ci->port[0], SR_GLOBAL_INIT); /* FIRST INTERRUPT ! */
+ musycc_serv_req(&ci->port[0], SR_GLOBAL_INIT); /* FIRST INTERRUPT ! */
/* sanity check settable parameters */
- if (cxt1e1_max_mru > 0xffe)
- {
- pr_warning("Maximum allowed MRU exceeded, resetting %d to %d.\n",
- cxt1e1_max_mru, 0xffe);
- cxt1e1_max_mru = 0xffe;
+ if (cxt1e1_max_mru > 0xffe) {
+ pr_warning("Maximum allowed MRU exceeded, resetting %d to %d.\n",
+ cxt1e1_max_mru, 0xffe);
+ cxt1e1_max_mru = 0xffe;
}
- if (cxt1e1_max_mtu > 0xffe)
- {
- pr_warning("Maximum allowed MTU exceeded, resetting %d to %d.\n",
- cxt1e1_max_mtu, 0xffe);
- cxt1e1_max_mtu = 0xffe;
+ if (cxt1e1_max_mtu > 0xffe) {
+ pr_warning("Maximum allowed MTU exceeded, resetting %d to %d.\n",
+ cxt1e1_max_mtu, 0xffe);
+ cxt1e1_max_mtu = 0xffe;
}
#ifdef SBE_WAN256T3_ENABLE
for (i = 0; i < MUSYCC_NPORTS; i++)
- musycc_init_port (&ci->port[i]);
+ musycc_init_port(&ci->port[i]);
#endif
return SBE_DRVR_SUCCESS; /* no error */
@@ -886,7 +832,7 @@
void
-musycc_bh_tx_eom (mpi_t * pi, int gchan)
+musycc_bh_tx_eom(mpi_t * pi, int gchan)
{
mch_t *ch;
struct mdesc *md;
@@ -900,128 +846,117 @@
volatile u_int32_t status;
ch = pi->chan[gchan];
- if (ch == 0 || ch->state != UP)
- {
- if (cxt1e1_log_level >= LOG_ERROR)
- pr_info("%s: intr: xmit EOM on uninitialized channel %d\n",
- pi->up->devname, gchan);
+ if (ch == 0 || ch->state != UP) {
+ if (cxt1e1_log_level >= LOG_ERROR)
+ pr_info("%s: intr: xmit EOM on uninitialized channel %d\n",
+ pi->up->devname, gchan);
}
if (ch == 0 || ch->mdt == 0)
- return; /* note: mdt==0 implies a malloc()
- * failure w/in chan_up() routine */
+ return; /* note: mdt==0 implies a malloc()
+ * failure w/in chan_up() routine */
#if 0
#ifdef SBE_ISR_INLINE
- spin_lock_irq (&ch->ch_txlock);
+ spin_lock_irq(&ch->ch_txlock);
#else
- spin_lock_irqsave (&ch->ch_txlock, flags);
+ spin_lock_irqsave(&ch->ch_txlock, flags);
#endif
#endif
- do
- {
- FLUSH_MEM_READ ();
- md = ch->txd_irq_srv;
- status = le32_to_cpu (md->status);
+ do {
+ FLUSH_MEM_READ();
+ md = ch->txd_irq_srv;
+ status = le32_to_cpu(md->status);
- /*
- * Note: Per MUSYCC Ref 6.4.9, the host does not poll a host-owned
- * Transmit Buffer Descriptor during Transparent Mode.
- */
- if (status & MUSYCC_TX_OWNED)
- {
- int readCount, loopCount;
+ /*
+ * Note: Per MUSYCC Ref 6.4.9, the host does not poll a host-owned
+ * Transmit Buffer Descriptor during Transparent Mode.
+ */
+ if (status & MUSYCC_TX_OWNED) {
+ int readCount, loopCount;
- /***********************************************************/
- /* HW Bug Fix */
- /* ---------- */
- /* Under certain PCI Bus loading conditions, the data */
- /* associated with an update of Shared Memory is delayed */
- /* relative to its PCI Interrupt. This is caught when */
- /* the host determines it does not yet OWN the descriptor. */
- /***********************************************************/
+ /***********************************************************/
+ /* HW Bug Fix */
+ /* ---------- */
+ /* Under certain PCI Bus loading conditions, the data */
+ /* associated with an update of Shared Memory is delayed */
+ /* relative to its PCI Interrupt. This is caught when */
+ /* the host determines it does not yet OWN the descriptor. */
+ /***********************************************************/
- readCount = 0;
- while (status & MUSYCC_TX_OWNED)
- {
- for (loopCount = 0; loopCount < 0x30; loopCount++)
- OS_uwait_dummy (); /* use call to avoid optimization
- * removal of dummy delay */
- FLUSH_MEM_READ ();
- status = le32_to_cpu (md->status);
- if (readCount++ > 40)
- break; /* don't wait any longer */
- }
- if (status & MUSYCC_TX_OWNED)
- {
- if (cxt1e1_log_level >= LOG_MONITOR)
- {
- pr_info("%s: Port %d Chan %2d - unexpected TX msg ownership intr (md %p sts %x)\n",
- pi->up->devname, pi->portnum, ch->channum,
- md, status);
- pr_info("++ User 0x%p IRQ_SRV 0x%p USR_ADD 0x%p QStopped %x, start_tx %x tx_full %d txd_free %d mode %x\n",
- ch->user, ch->txd_irq_srv, ch->txd_usr_add,
- sd_queue_stopped (ch->user),
- ch->ch_start_tx, ch->tx_full, ch->txd_free, ch->p.chan_mode);
- musycc_dump_txbuffer_ring (ch, 0);
- }
- break; /* Not our mdesc, done */
- } else
- {
- if (cxt1e1_log_level >= LOG_MONITOR)
- pr_info("%s: Port %d Chan %2d - recovered TX msg ownership [%d] (md %p sts %x)\n",
- pi->up->devname, pi->portnum, ch->channum, readCount, md, status);
- }
- }
- ch->txd_irq_srv = md->snext;
+ readCount = 0;
+ while (status & MUSYCC_TX_OWNED) {
+ for (loopCount = 0; loopCount < 0x30; loopCount++)
+ OS_uwait_dummy(); /* use call to avoid optimization
+ * removal of dummy delay */
+ FLUSH_MEM_READ();
+ status = le32_to_cpu(md->status);
+ if (readCount++ > 40)
+ break; /* don't wait any longer */
+ }
+ if (status & MUSYCC_TX_OWNED) {
+ if (cxt1e1_log_level >= LOG_MONITOR) {
+ pr_info("%s: Port %d Chan %2d - unexpected TX msg ownership intr (md %p sts %x)\n",
+ pi->up->devname, pi->portnum, ch->channum,
+ md, status);
+ pr_info("++ User 0x%p IRQ_SRV 0x%p USR_ADD 0x%p QStopped %x, start_tx %x tx_full %d txd_free %d mode %x\n",
+ ch->user, ch->txd_irq_srv, ch->txd_usr_add,
+ sd_queue_stopped(ch->user),
+ ch->ch_start_tx, ch->tx_full, ch->txd_free, ch->p.chan_mode);
+ musycc_dump_txbuffer_ring(ch, 0);
+ }
+ break; /* Not our mdesc, done */
+ } else {
+ if (cxt1e1_log_level >= LOG_MONITOR)
+ pr_info("%s: Port %d Chan %2d - recovered TX msg ownership [%d] (md %p sts %x)\n",
+ pi->up->devname, pi->portnum, ch->channum, readCount, md, status);
+ }
+ }
+ ch->txd_irq_srv = md->snext;
- md->data = 0;
- if (md->mem_token != 0)
- {
- /* upcount channel */
- atomic_sub (OS_mem_token_tlen (md->mem_token), &ch->tx_pending);
- /* upcount card */
- atomic_sub (OS_mem_token_tlen (md->mem_token), &pi->up->tx_pending);
+ md->data = 0;
+ if (md->mem_token != 0) {
+ /* upcount channel */
+ atomic_sub(OS_mem_token_tlen(md->mem_token), &ch->tx_pending);
+ /* upcount card */
+ atomic_sub(OS_mem_token_tlen(md->mem_token), &pi->up->tx_pending);
#ifdef SBE_WAN256T3_ENABLE
- if (!atomic_read (&pi->up->tx_pending))
- wan256t3_led (pi->up, LED_TX, 0);
+ if (!atomic_read(&pi->up->tx_pending))
+ wan256t3_led(pi->up, LED_TX, 0);
#endif
#ifdef CONFIG_SBE_WAN256T3_NCOMM
- /* callback that our packet was sent */
- {
- int hdlcnum = (pi->portnum * 32 + gchan);
+ /* callback that our packet was sent */
+ {
+ int hdlcnum = (pi->portnum * 32 + gchan);
- if (hdlcnum >= 228)
- {
- if (nciProcess_TX_complete)
- (*nciProcess_TX_complete) (hdlcnum,
- getuserbychan (gchan));
- }
- }
+ if (hdlcnum >= 228) {
+ if (nciProcess_TX_complete)
+ (*nciProcess_TX_complete) (hdlcnum,
+ getuserbychan(gchan));
+ }
+ }
#endif /*** CONFIG_SBE_WAN256T3_NCOMM ***/
- OS_mem_token_free_irq (md->mem_token);
- md->mem_token = 0;
- }
- md->status = 0;
+ OS_mem_token_free_irq(md->mem_token);
+ md->mem_token = 0;
+ }
+ md->status = 0;
#ifdef RLD_TXFULL_DEBUG
- if (cxt1e1_log_level >= LOG_MONITOR2)
- pr_info("~~ tx_eom: tx_full %x txd_free %d -> %d\n",
- ch->tx_full, ch->txd_free, ch->txd_free + 1);
+ if (cxt1e1_log_level >= LOG_MONITOR2)
+ pr_info("~~ tx_eom: tx_full %x txd_free %d -> %d\n",
+ ch->tx_full, ch->txd_free, ch->txd_free + 1);
#endif
- ++ch->txd_free;
- FLUSH_MEM_WRITE ();
+ ++ch->txd_free;
+ FLUSH_MEM_WRITE();
- if ((ch->p.chan_mode != CFG_CH_PROTO_TRANS) && (status & EOBIRQ_ENABLE))
- {
- if (cxt1e1_log_level >= LOG_MONITOR)
- pr_info("%s: Mode (%x) incorrect EOB status (%x)\n",
- pi->up->devname, ch->p.chan_mode, status);
- if ((status & EOMIRQ_ENABLE) == 0)
- break;
- }
- }
- while ((ch->p.chan_mode != CFG_CH_PROTO_TRANS) && ((status & EOMIRQ_ENABLE) == 0));
+ if ((ch->p.chan_mode != CFG_CH_PROTO_TRANS) && (status & EOBIRQ_ENABLE)) {
+ if (cxt1e1_log_level >= LOG_MONITOR)
+ pr_info("%s: Mode (%x) incorrect EOB status (%x)\n",
+ pi->up->devname, ch->p.chan_mode, status);
+ if ((status & EOMIRQ_ENABLE) == 0)
+ break;
+ }
+ } while ((ch->p.chan_mode != CFG_CH_PROTO_TRANS) && ((status & EOMIRQ_ENABLE) == 0));
/*
* NOTE: (The above 'while' is coupled w/ previous 'do', way above.) Each
* Transparent data buffer has the EOB bit, and NOT the EOM bit, set and
@@ -1029,56 +964,53 @@
* buffer.
*/
- FLUSH_MEM_READ ();
+ FLUSH_MEM_READ();
/*
* Smooth flow control hysterisis by maintaining task stoppage until half
* the available write buffers are available.
*/
- if (ch->tx_full && (ch->txd_free >= (ch->txd_num / 2)))
- {
- /*
- * Then, only releave task stoppage if we actually have enough
- * buffers to service the last requested packet. It may require MORE
- * than half the available!
- */
- if (ch->txd_free >= ch->txd_required)
- {
+ if (ch->tx_full && (ch->txd_free >= (ch->txd_num / 2))) {
+ /*
+ * Then, only releave task stoppage if we actually have enough
+ * buffers to service the last requested packet. It may require MORE
+ * than half the available!
+ */
+ if (ch->txd_free >= ch->txd_required) {
#ifdef RLD_TXFULL_DEBUG
- if (cxt1e1_log_level >= LOG_MONITOR2)
- pr_info("tx_eom[%d]: enable xmit tx_full no more, txd_free %d txd_num/2 %d\n",
- ch->channum,
- ch->txd_free, ch->txd_num / 2);
+ if (cxt1e1_log_level >= LOG_MONITOR2)
+ pr_info("tx_eom[%d]: enable xmit tx_full no more, txd_free %d txd_num/2 %d\n",
+ ch->channum,
+ ch->txd_free, ch->txd_num / 2);
#endif
- ch->tx_full = 0;
- ch->txd_required = 0;
- sd_enable_xmit (ch->user); /* re-enable to catch flow controlled
- * channel */
- }
+ ch->tx_full = 0;
+ ch->txd_required = 0;
+ sd_enable_xmit(ch->user); /* re-enable to catch flow controlled
+ * channel */
+ }
}
#ifdef RLD_TXFULL_DEBUG
- else if (ch->tx_full)
- {
- if (cxt1e1_log_level >= LOG_MONITOR2)
- pr_info("tx_eom[%d]: bypass TX enable though room available? (txd_free %d txd_num/2 %d)\n",
- ch->channum,
- ch->txd_free, ch->txd_num / 2);
+ else if (ch->tx_full) {
+ if (cxt1e1_log_level >= LOG_MONITOR2)
+ pr_info("tx_eom[%d]: bypass TX enable though room available? (txd_free %d txd_num/2 %d)\n",
+ ch->channum,
+ ch->txd_free, ch->txd_num / 2);
}
#endif
- FLUSH_MEM_WRITE ();
+ FLUSH_MEM_WRITE();
#if 0
#ifdef SBE_ISR_INLINE
- spin_unlock_irq (&ch->ch_txlock);
+ spin_unlock_irq(&ch->ch_txlock);
#else
- spin_unlock_irqrestore (&ch->ch_txlock, flags);
+ spin_unlock_irqrestore(&ch->ch_txlock, flags);
#endif
#endif
}
STATIC void
-musycc_bh_rx_eom (mpi_t * pi, int gchan)
+musycc_bh_rx_eom(mpi_t * pi, int gchan)
{
mch_t *ch;
void *m, *m2;
@@ -1087,89 +1019,76 @@
u_int32_t error;
ch = pi->chan[gchan];
- if (ch == 0 || ch->state != UP)
- {
- if (cxt1e1_log_level > LOG_ERROR)
- pr_info("%s: intr: receive EOM on uninitialized channel %d\n",
- pi->up->devname, gchan);
- return;
+ if (ch == 0 || ch->state != UP) {
+ if (cxt1e1_log_level > LOG_ERROR)
+ pr_info("%s: intr: receive EOM on uninitialized channel %d\n",
+ pi->up->devname, gchan);
+ return;
}
if (ch->mdr == 0)
- return; /* can this happen ? */
+ return; /* can this happen ? */
- for (;;)
- {
- FLUSH_MEM_READ ();
- md = &ch->mdr[ch->rxix_irq_srv];
- status = le32_to_cpu (md->status);
- if (!(status & HOST_RX_OWNED))
- break; /* Not our mdesc, done */
- m = md->mem_token;
- error = (status >> 16) & 0xf;
- if (error == 0)
- {
+ for (;;) {
+ FLUSH_MEM_READ();
+ md = &ch->mdr[ch->rxix_irq_srv];
+ status = le32_to_cpu(md->status);
+ if (!(status & HOST_RX_OWNED))
+ break; /* Not our mdesc, done */
+ m = md->mem_token;
+ error = (status >> 16) & 0xf;
+ if (error == 0) {
#ifdef CONFIG_SBE_WAN256T3_NCOMM
- int hdlcnum = (pi->portnum * 32 + gchan);
+ int hdlcnum = (pi->portnum * 32 + gchan);
- /*
- * if the packet number belongs to NCOMM, then send it to the TMS
- * driver
- */
- if (hdlcnum >= 228)
- {
- if (nciProcess_RX_packet)
- (*nciProcess_RX_packet) (hdlcnum, status & 0x3fff, m, ch->user);
- } else
+ /*
+ * if the packet number belongs to NCOMM, then send it to the TMS
+ * driver
+ */
+ if (hdlcnum >= 228) {
+ if (nciProcess_RX_packet)
+ (*nciProcess_RX_packet) (hdlcnum, status & 0x3fff, m, ch->user);
+ } else
#endif /*** CONFIG_SBE_WAN256T3_NCOMM ***/
- {
- if ((m2 = OS_mem_token_alloc (cxt1e1_max_mru)))
- {
- /* substitute the mbuf+cluster */
- md->mem_token = m2;
- md->data = cpu_to_le32 (OS_vtophys (OS_mem_token_data (m2)));
+ {
+ if ((m2 = OS_mem_token_alloc(cxt1e1_max_mru))) {
+ /* substitute the mbuf+cluster */
+ md->mem_token = m2;
+ md->data = cpu_to_le32(OS_vtophys(OS_mem_token_data(m2)));
- /* pass the received mbuf upward */
- sd_recv_consume (m, status & LENGTH_MASK, ch->user);
- ch->s.rx_packets++;
- ch->s.rx_bytes += status & LENGTH_MASK;
- } else
- {
- ch->s.rx_dropped++;
- }
- }
- } else if (error == ERR_FCS)
- {
- ch->s.rx_crc_errors++;
- } else if (error == ERR_ALIGN)
- {
- ch->s.rx_missed_errors++;
- } else if (error == ERR_ABT)
- {
- ch->s.rx_missed_errors++;
- } else if (error == ERR_LNG)
- {
- ch->s.rx_length_errors++;
- } else if (error == ERR_SHT)
- {
- ch->s.rx_length_errors++;
- }
- FLUSH_MEM_WRITE ();
- status = cxt1e1_max_mru;
- if (ch->p.chan_mode == CFG_CH_PROTO_TRANS)
- status |= EOBIRQ_ENABLE;
- md->status = cpu_to_le32 (status);
+ /* pass the received mbuf upward */
+ sd_recv_consume(m, status & LENGTH_MASK, ch->user);
+ ch->s.rx_packets++;
+ ch->s.rx_bytes += status & LENGTH_MASK;
+ } else
+ ch->s.rx_dropped++;
+ }
+ } else if (error == ERR_FCS)
+ ch->s.rx_crc_errors++;
+ else if (error == ERR_ALIGN)
+ ch->s.rx_missed_errors++;
+ else if (error == ERR_ABT)
+ ch->s.rx_missed_errors++;
+ else if (error == ERR_LNG)
+ ch->s.rx_length_errors++;
+ else if (error == ERR_SHT)
+ ch->s.rx_length_errors++;
+ FLUSH_MEM_WRITE();
+ status = cxt1e1_max_mru;
+ if (ch->p.chan_mode == CFG_CH_PROTO_TRANS)
+ status |= EOBIRQ_ENABLE;
+ md->status = cpu_to_le32(status);
- /* Check next mdesc in the ring */
- if (++ch->rxix_irq_srv >= ch->rxd_num)
- ch->rxix_irq_srv = 0;
- FLUSH_MEM_WRITE ();
+ /* Check next mdesc in the ring */
+ if (++ch->rxix_irq_srv >= ch->rxd_num)
+ ch->rxix_irq_srv = 0;
+ FLUSH_MEM_WRITE();
}
}
irqreturn_t
-musycc_intr_th_handler (void *devp)
+musycc_intr_th_handler(void *devp)
{
ci_t *ci = (ci_t *) devp;
volatile u_int32_t status, currInt = 0;
@@ -1180,28 +1099,25 @@
* might be shared, just return.
*/
if (ci->state == C_INIT)
- {
- return IRQ_NONE;
- }
+ return IRQ_NONE;
/*
* Marked as hardware available. Don't service interrupts, just clear the
* event.
*/
- if (ci->state == C_IDLE)
- {
- status = pci_read_32 ((u_int32_t *) &ci->reg->isd);
+ if (ci->state == C_IDLE) {
+ status = pci_read_32((u_int32_t *) &ci->reg->isd);
- /* clear the interrupt but process nothing else */
- pci_write_32 ((u_int32_t *) &ci->reg->isd, status);
- return IRQ_HANDLED;
+ /* clear the interrupt but process nothing else */
+ pci_write_32((u_int32_t *) &ci->reg->isd, status);
+ return IRQ_HANDLED;
}
- FLUSH_PCI_READ ();
- FLUSH_MEM_READ ();
+ FLUSH_PCI_READ();
+ FLUSH_MEM_READ();
- status = pci_read_32 ((u_int32_t *) &ci->reg->isd);
- nextInt = INTRPTS_NEXTINT (status);
- intCnt = INTRPTS_INTCNT (status);
+ status = pci_read_32((u_int32_t *) &ci->reg->isd);
+ nextInt = INTRPTS_NEXTINT(status);
+ intCnt = INTRPTS_INTCNT(status);
ci->intlog.drvr_intr_thcount++;
/*********************************************************/
@@ -1218,22 +1134,20 @@
/* incorrect ISD's are encountered. */
/*********************************************************/
- if (nextInt != INTRPTS_NEXTINT (ci->intlog.this_status_new))
- {
- if (cxt1e1_log_level >= LOG_MONITOR)
- {
- pr_info("%s: note - updated ISD from %08x to %08x\n",
- ci->devname, status,
- (status & (~INTRPTS_NEXTINT_M)) | ci->intlog.this_status_new);
- }
- /*
- * Replace bogus status with software corrected value.
- *
- * It's not known whether, during this problem occurrence, if the
- * INTFULL bit is correctly reported or not.
- */
- status = (status & (~INTRPTS_NEXTINT_M)) | (ci->intlog.this_status_new);
- nextInt = INTRPTS_NEXTINT (status);
+ if (nextInt != INTRPTS_NEXTINT(ci->intlog.this_status_new)) {
+ if (cxt1e1_log_level >= LOG_MONITOR) {
+ pr_info("%s: note - updated ISD from %08x to %08x\n",
+ ci->devname, status,
+ (status & (~INTRPTS_NEXTINT_M)) | ci->intlog.this_status_new);
+ }
+ /*
+ * Replace bogus status with software corrected value.
+ *
+ * It's not known whether, during this problem occurrence, if the
+ * INTFULL bit is correctly reported or not.
+ */
+ status = (status & (~INTRPTS_NEXTINT_M)) | (ci->intlog.this_status_new);
+ nextInt = INTRPTS_NEXTINT(status);
}
/**********************************************/
/* Cn847x Bug Fix */
@@ -1243,43 +1157,40 @@
/**********************************************/
if (intCnt == INT_QUEUE_SIZE)
- {
- currInt = ((intCnt - 1) + nextInt) & (INT_QUEUE_SIZE - 1);
- } else
- /************************************************/
- /* Interrupt Write Location Issues */
- /* ------------------------------- */
- /* When the interrupt status descriptor is */
- /* written, the interrupt line is de-asserted */
- /* by the Cn847x. In the case of MIPS */
- /* microprocessors, this must occur at the */
- /* beginning of the interrupt handler so that */
- /* the interrupt handle is not re-entered due */
- /* to interrupt dis-assertion latency. */
- /* In the case of all other processors, this */
- /* action should occur at the end of the */
- /* interrupt handler to avoid overwriting the */
- /* interrupt queue. */
- /************************************************/
+ currInt = ((intCnt - 1) + nextInt) & (INT_QUEUE_SIZE - 1);
+ else
+ /************************************************/
+ /* Interrupt Write Location Issues */
+ /* ------------------------------- */
+ /* When the interrupt status descriptor is */
+ /* written, the interrupt line is de-asserted */
+ /* by the Cn847x. In the case of MIPS */
+ /* microprocessors, this must occur at the */
+ /* beginning of the interrupt handler so that */
+ /* the interrupt handle is not re-entered due */
+ /* to interrupt dis-assertion latency. */
+ /* In the case of all other processors, this */
+ /* action should occur at the end of the */
+ /* interrupt handler to avoid overwriting the */
+ /* interrupt queue. */
+ /************************************************/
if (intCnt)
- {
- currInt = (intCnt + nextInt) & (INT_QUEUE_SIZE - 1);
- } else
- {
- /*
- * NOTE: Servicing an interrupt whose ISD contains a count of ZERO
- * can be indicative of a Shared Interrupt chain. Our driver can be
- * called from the system's interrupt handler as a matter of the OS
- * walking the chain. As the chain is walked, the interrupt will
- * eventually be serviced by the correct driver/handler.
- */
+ currInt = (intCnt + nextInt) & (INT_QUEUE_SIZE - 1);
+ else {
+ /*
+ * NOTE: Servicing an interrupt whose ISD contains a count of ZERO
+ * can be indicative of a Shared Interrupt chain. Our driver can be
+ * called from the system's interrupt handler as a matter of the OS
+ * walking the chain. As the chain is walked, the interrupt will
+ * eventually be serviced by the correct driver/handler.
+ */
#if 0
- /* chained interrupt = not ours */
- pr_info(">> %s: intCnt NULL, sts %x, possibly a chained interrupt!\n",
- ci->devname, status);
+ /* chained interrupt = not ours */
+ pr_info(">> %s: intCnt NULL, sts %x, possibly a chained interrupt!\n",
+ ci->devname, status);
#endif
- return IRQ_NONE;
+ return IRQ_NONE;
}
ci->iqp_tailx = currInt;
@@ -1289,27 +1200,25 @@
ci->intlog.this_status_new = currInt;
if ((cxt1e1_log_level >= LOG_WARN) && (status & INTRPTS_INTFULL_M))
- {
- pr_info("%s: Interrupt queue full condition occurred\n", ci->devname);
- }
+ pr_info("%s: Interrupt queue full condition occurred\n", ci->devname);
if (cxt1e1_log_level >= LOG_DEBUG)
- pr_info("%s: interrupts pending, isd @ 0x%p: %x curr %d cnt %d NEXT %d\n",
- ci->devname, &ci->reg->isd,
- status, nextInt, intCnt, (intCnt + nextInt) & (INT_QUEUE_SIZE - 1));
+ pr_info("%s: interrupts pending, isd @ 0x%p: %x curr %d cnt %d NEXT %d\n",
+ ci->devname, &ci->reg->isd,
+ status, nextInt, intCnt, (intCnt + nextInt) & (INT_QUEUE_SIZE - 1));
- FLUSH_MEM_WRITE ();
+ FLUSH_MEM_WRITE();
#if defined(SBE_ISR_TASKLET)
- pci_write_32 ((u_int32_t *) &ci->reg->isd, currInt);
- atomic_inc (&ci->bh_pending);
- tasklet_schedule (&ci->ci_musycc_isr_tasklet);
+ pci_write_32((u_int32_t *) &ci->reg->isd, currInt);
+ atomic_inc(&ci->bh_pending);
+ tasklet_schedule(&ci->ci_musycc_isr_tasklet);
#elif defined(SBE_ISR_IMMEDIATE)
- pci_write_32 ((u_int32_t *) &ci->reg->isd, currInt);
- atomic_inc (&ci->bh_pending);
- queue_task (&ci->ci_musycc_isr_tq, &tq_immediate);
- mark_bh (IMMEDIATE_BH);
+ pci_write_32((u_int32_t *) &ci->reg->isd, currInt);
+ atomic_inc(&ci->bh_pending);
+ queue_task(&ci->ci_musycc_isr_tq, &tq_immediate);
+ mark_bh(IMMEDIATE_BH);
#elif defined(SBE_ISR_INLINE)
- (void) musycc_intr_bh_tasklet (ci);
- pci_write_32 ((u_int32_t *) &ci->reg->isd, currInt);
+ (void) musycc_intr_bh_tasklet(ci);
+ pci_write_32((u_int32_t *) &ci->reg->isd, currInt);
#endif
return IRQ_HANDLED;
}
@@ -1320,7 +1229,7 @@
#else
void
#endif
-musycc_intr_bh_tasklet (ci_t * ci)
+musycc_intr_bh_tasklet(ci_t * ci)
{
mpi_t *pi;
mch_t *ch;
@@ -1336,21 +1245,19 @@
* Hardware not available, potential interrupt hang. But since interrupt
* might be shared, just return.
*/
- if ((drvr_state != SBE_DRVR_AVAILABLE) || (ci->state == C_INIT))
- {
+ if ((drvr_state != SBE_DRVR_AVAILABLE) || (ci->state == C_INIT)) {
#if defined(SBE_ISR_IMMEDIATE)
- return 0L;
+ return 0L;
#else
- return;
+ return;
#endif
}
#if defined(SBE_ISR_TASKLET) || defined(SBE_ISR_IMMEDIATE)
- if (drvr_state != SBE_DRVR_AVAILABLE)
- {
+ if (drvr_state != SBE_DRVR_AVAILABLE) {
#if defined(SBE_ISR_TASKLET)
- return;
+ return;
#elif defined(SBE_ISR_IMMEDIATE)
- return 0L;
+ return 0L;
#endif
}
#elif defined(SBE_ISR_INLINE)
@@ -1358,273 +1265,249 @@
#endif
ci->intlog.drvr_intr_bhcount++;
- FLUSH_MEM_READ ();
+ FLUSH_MEM_READ();
{
- unsigned int bh = atomic_read (&ci->bh_pending);
+ unsigned int bh = atomic_read(&ci->bh_pending);
- max_bh = max (bh, max_bh);
+ max_bh = max(bh, max_bh);
}
- atomic_set (&ci->bh_pending, 0);/* if here, no longer pending */
- while ((headx = ci->iqp_headx) != (tailx = ci->iqp_tailx))
- {
- intCnt = (tailx >= headx) ? (tailx - headx) : (tailx - headx + INT_QUEUE_SIZE);
- currInt = le32_to_cpu (ci->iqd_p[headx]);
+ atomic_set(&ci->bh_pending, 0);/* if here, no longer pending */
+ while ((headx = ci->iqp_headx) != (tailx = ci->iqp_tailx)) {
+ intCnt = (tailx >= headx) ? (tailx - headx) : (tailx - headx + INT_QUEUE_SIZE);
+ currInt = le32_to_cpu(ci->iqd_p[headx]);
- max_intcnt = max (intCnt, max_intcnt); /* RLD DEBUG */
+ max_intcnt = max(intCnt, max_intcnt); /* RLD DEBUG */
- /**************************************************/
- /* HW Bug Fix */
- /* ---------- */
- /* The following code checks for the condition */
- /* of interrupt assertion before interrupt */
- /* queue update. This is a problem on several */
- /* PCI-Local bridge chips found on some products. */
- /**************************************************/
+ /**************************************************/
+ /* HW Bug Fix */
+ /* ---------- */
+ /* The following code checks for the condition */
+ /* of interrupt assertion before interrupt */
+ /* queue update. This is a problem on several */
+ /* PCI-Local bridge chips found on some products. */
+ /**************************************************/
- readCount = 0;
- if ((currInt == badInt) || (currInt == badInt2))
- ci->intlog.drvr_int_failure++;
+ readCount = 0;
+ if ((currInt == badInt) || (currInt == badInt2))
+ ci->intlog.drvr_int_failure++;
- while ((currInt == badInt) || (currInt == badInt2))
- {
- for (loopCount = 0; loopCount < 0x30; loopCount++)
- OS_uwait_dummy (); /* use call to avoid optimization removal
- * of dummy delay */
- FLUSH_MEM_READ ();
- currInt = le32_to_cpu (ci->iqd_p[headx]);
- if (readCount++ > 20)
- break;
- }
+ while ((currInt == badInt) || (currInt == badInt2)) {
+ for (loopCount = 0; loopCount < 0x30; loopCount++)
+ OS_uwait_dummy(); /* use call to avoid optimization removal
+ * of dummy delay */
+ FLUSH_MEM_READ();
+ currInt = le32_to_cpu(ci->iqd_p[headx]);
+ if (readCount++ > 20)
+ break;
+ }
- if ((currInt == badInt) || (currInt == badInt2)) /* catch failure of Bug
- * Fix checking */
- {
- if (cxt1e1_log_level >= LOG_WARN)
- pr_info("%s: Illegal Interrupt Detected @ 0x%p, mod %d.)\n",
- ci->devname, &ci->iqd_p[headx], headx);
+ if ((currInt == badInt) || (currInt == badInt2)) { /* catch failure of Bug
+ * Fix checking */
+ if (cxt1e1_log_level >= LOG_WARN)
+ pr_info("%s: Illegal Interrupt Detected @ 0x%p, mod %d.)\n",
+ ci->devname, &ci->iqd_p[headx], headx);
- /*
- * If the descriptor has not recovered, then leaving the EMPTY
- * entry set will not signal to the MUSYCC that this descriptor
- * has been serviced. The Interrupt Queue can then start losing
- * available descriptors and MUSYCC eventually encounters and
- * reports the INTFULL condition. Per manual, changing any bit
- * marks descriptor as available, thus the use of different
- * EMPTY_ENTRY values.
- */
+ /*
+ * If the descriptor has not recovered, then leaving the EMPTY
+ * entry set will not signal to the MUSYCC that this descriptor
+ * has been serviced. The Interrupt Queue can then start losing
+ * available descriptors and MUSYCC eventually encounters and
+ * reports the INTFULL condition. Per manual, changing any bit
+ * marks descriptor as available, thus the use of different
+ * EMPTY_ENTRY values.
+ */
- if (currInt == badInt)
- {
- ci->iqd_p[headx] = __constant_cpu_to_le32 (INT_EMPTY_ENTRY2);
- } else
- {
- ci->iqd_p[headx] = __constant_cpu_to_le32 (INT_EMPTY_ENTRY);
- }
- ci->iqp_headx = (headx + 1) & (INT_QUEUE_SIZE - 1); /* insure wrapness */
- FLUSH_MEM_WRITE ();
- FLUSH_MEM_READ ();
- continue;
- }
- group = INTRPT_GRP (currInt);
- gchan = INTRPT_CH (currInt);
- event = INTRPT_EVENT (currInt);
- err = INTRPT_ERROR (currInt);
- tx = currInt & INTRPT_DIR_M;
+ if (currInt == badInt)
+ ci->iqd_p[headx] = __constant_cpu_to_le32(INT_EMPTY_ENTRY2);
+ else
+ ci->iqd_p[headx] = __constant_cpu_to_le32(INT_EMPTY_ENTRY);
+ ci->iqp_headx = (headx + 1) & (INT_QUEUE_SIZE - 1); /* insure wrapness */
+ FLUSH_MEM_WRITE();
+ FLUSH_MEM_READ();
+ continue;
+ }
+ group = INTRPT_GRP(currInt);
+ gchan = INTRPT_CH(currInt);
+ event = INTRPT_EVENT(currInt);
+ err = INTRPT_ERROR(currInt);
+ tx = currInt & INTRPT_DIR_M;
- ci->iqd_p[headx] = __constant_cpu_to_le32 (INT_EMPTY_ENTRY);
- FLUSH_MEM_WRITE ();
+ ci->iqd_p[headx] = __constant_cpu_to_le32(INT_EMPTY_ENTRY);
+ FLUSH_MEM_WRITE();
- if (cxt1e1_log_level >= LOG_DEBUG)
- {
- if (err != 0)
- pr_info(" %08x -> err: %2d,", currInt, err);
+ if (cxt1e1_log_level >= LOG_DEBUG) {
+ if (err != 0)
+ pr_info(" %08x -> err: %2d,", currInt, err);
- pr_info("+ interrupt event: %d, grp: %d, chan: %2d, side: %cX\n",
- event, group, gchan, tx ? 'T' : 'R');
- }
- pi = &ci->port[group]; /* notice that here we assume 1-1 group -
- * port mapping */
- ch = pi->chan[gchan];
- switch (event)
- {
- case EVE_SACK: /* Service Request Acknowledge */
- if (cxt1e1_log_level >= LOG_DEBUG)
- {
- volatile u_int32_t r;
+ pr_info("+ interrupt event: %d, grp: %d, chan: %2d, side: %cX\n",
+ event, group, gchan, tx ? 'T' : 'R');
+ }
+ pi = &ci->port[group]; /* notice that here we assume 1-1 group -
+ * port mapping */
+ ch = pi->chan[gchan];
+ switch (event) {
+ case EVE_SACK: /* Service Request Acknowledge */
+ if (cxt1e1_log_level >= LOG_DEBUG) {
+ volatile u_int32_t r;
- r = pci_read_32 ((u_int32_t *) &pi->reg->srd);
- pr_info("- SACK cmd: %08x (hdw= %08x)\n", pi->sr_last, r);
- }
- SD_SEM_GIVE (&pi->sr_sem_wait); /* wake up waiting process */
- break;
- case EVE_CHABT: /* Change To Abort Code (0x7e -> 0xff) */
- case EVE_CHIC: /* Change To Idle Code (0xff -> 0x7e) */
- break;
- case EVE_EOM: /* End Of Message */
- case EVE_EOB: /* End Of Buffer (Transparent mode) */
- if (tx)
- {
- musycc_bh_tx_eom (pi, gchan);
- } else
- {
- musycc_bh_rx_eom (pi, gchan);
- }
+ r = pci_read_32((u_int32_t *) &pi->reg->srd);
+ pr_info("- SACK cmd: %08x (hdw= %08x)\n", pi->sr_last, r);
+ }
+ SD_SEM_GIVE(&pi->sr_sem_wait); /* wake up waiting process */
+ break;
+ case EVE_CHABT: /* Change To Abort Code (0x7e -> 0xff) */
+ case EVE_CHIC: /* Change To Idle Code (0xff -> 0x7e) */
+ break;
+ case EVE_EOM: /* End Of Message */
+ case EVE_EOB: /* End Of Buffer (Transparent mode) */
+ if (tx)
+ musycc_bh_tx_eom(pi, gchan);
+ else
+ musycc_bh_rx_eom(pi, gchan);
#if 0
- break;
+ break;
#else
- /*
- * MUSYCC Interrupt Descriptor section states that EOB and EOM
- * can be combined with the NONE error (as well as others). So
- * drop thru to catch this...
- */
+ /*
+ * MUSYCC Interrupt Descriptor section states that EOB and EOM
+ * can be combined with the NONE error (as well as others). So
+ * drop thru to catch this...
+ */
#endif
- case EVE_NONE:
- if (err == ERR_SHT)
- {
- ch->s.rx_length_errors++;
- }
- break;
- default:
- if (cxt1e1_log_level >= LOG_WARN)
- pr_info("%s: unexpected interrupt event: %d, iqd[%d]: %08x, port: %d\n", ci->devname,
- event, headx, currInt, group);
- break;
- } /* switch on event */
+ case EVE_NONE:
+ if (err == ERR_SHT)
+ ch->s.rx_length_errors++;
+ break;
+ default:
+ if (cxt1e1_log_level >= LOG_WARN)
+ pr_info("%s: unexpected interrupt event: %d, iqd[%d]: %08x, port: %d\n", ci->devname,
+ event, headx, currInt, group);
+ break;
+ } /* switch on event */
- /*
- * Per MUSYCC Manual, Section 6.4.8.3 [Transmit Errors], TX errors
- * are service-affecting and require action to resume normal
- * bit-level processing.
- */
+ /*
+ * Per MUSYCC Manual, Section 6.4.8.3 [Transmit Errors], TX errors
+ * are service-affecting and require action to resume normal
+ * bit-level processing.
+ */
- switch (err)
- {
- case ERR_ONR:
- /*
- * Per MUSYCC manual, Section 6.4.8.3 [Transmit Errors], this
- * error requires Transmit channel reactivation.
- *
- * Per MUSYCC manual, Section 6.4.8.4 [Receive Errors], this error
- * requires Receive channel reactivation.
- */
- if (tx)
- {
+ switch (err) {
+ case ERR_ONR:
+ /*
+ * Per MUSYCC manual, Section 6.4.8.3 [Transmit Errors], this
+ * error requires Transmit channel reactivation.
+ *
+ * Per MUSYCC manual, Section 6.4.8.4 [Receive Errors], this error
+ * requires Receive channel reactivation.
+ */
+ if (tx) {
- /*
- * TX ONR Error only occurs when channel is configured for
- * Transparent Mode. However, this code will catch and
- * re-activate on ANY TX ONR error.
- */
+ /*
+ * TX ONR Error only occurs when channel is configured for
+ * Transparent Mode. However, this code will catch and
+ * re-activate on ANY TX ONR error.
+ */
- /*
- * Set flag to re-enable on any next transmit attempt.
- */
- ch->ch_start_tx = CH_START_TX_ONR;
+ /*
+ * Set flag to re-enable on any next transmit attempt.
+ */
+ ch->ch_start_tx = CH_START_TX_ONR;
- {
+ {
#ifdef RLD_TRANS_DEBUG
- if (1 || cxt1e1_log_level >= LOG_MONITOR)
+ if (1 || cxt1e1_log_level >= LOG_MONITOR)
#else
- if (cxt1e1_log_level >= LOG_MONITOR)
+ if (cxt1e1_log_level >= LOG_MONITOR)
#endif
- {
- pr_info("%s: TX buffer underflow [ONR] on channel %d, mode %x QStopped %x free %d\n",
- ci->devname, ch->channum, ch->p.chan_mode, sd_queue_stopped (ch->user), ch->txd_free);
+ {
+ pr_info("%s: TX buffer underflow [ONR] on channel %d, mode %x QStopped %x free %d\n",
+ ci->devname, ch->channum, ch->p.chan_mode, sd_queue_stopped(ch->user), ch->txd_free);
#ifdef RLD_DEBUG
- if (ch->p.chan_mode == 2) /* problem = ONR on HDLC
- * mode */
- {
- pr_info("++ Failed Last %x Next %x QStopped %x, start_tx %x tx_full %d txd_free %d mode %x\n",
- (u_int32_t) ch->txd_irq_srv, (u_int32_t) ch->txd_usr_add,
- sd_queue_stopped (ch->user),
- ch->ch_start_tx, ch->tx_full, ch->txd_free, ch->p.chan_mode);
- musycc_dump_txbuffer_ring (ch, 0);
- }
+ if (ch->p.chan_mode == 2) { /* problem = ONR on HDLC
+ * mode */
+ pr_info("++ Failed Last %x Next %x QStopped %x, start_tx %x tx_full %d txd_free %d mode %x\n",
+ (u_int32_t) ch->txd_irq_srv, (u_int32_t) ch->txd_usr_add,
+ sd_queue_stopped(ch->user),
+ ch->ch_start_tx, ch->tx_full, ch->txd_free, ch->p.chan_mode);
+ musycc_dump_txbuffer_ring(ch, 0);
+ }
#endif
- }
- }
- } else /* RX buffer overrun */
- {
- /*
- * Per MUSYCC manual, Section 6.4.8.4 [Receive Errors],
- * channel recovery for this RX ONR error IS required. It is
- * also suggested to increase the number of receive buffers
- * for this channel. Receive channel reactivation IS
- * required, and data has been lost.
- */
- ch->s.rx_over_errors++;
- ch->ch_start_rx = CH_START_RX_ONR;
+ }
+ }
+ } else { /* RX buffer overrun */
+ /*
+ * Per MUSYCC manual, Section 6.4.8.4 [Receive Errors],
+ * channel recovery for this RX ONR error IS required. It is
+ * also suggested to increase the number of receive buffers
+ * for this channel. Receive channel reactivation IS
+ * required, and data has been lost.
+ */
+ ch->s.rx_over_errors++;
+ ch->ch_start_rx = CH_START_RX_ONR;
- if (cxt1e1_log_level >= LOG_WARN)
- {
- pr_info("%s: RX buffer overflow [ONR] on channel %d, mode %x\n",
- ci->devname, ch->channum, ch->p.chan_mode);
- //musycc_dump_rxbuffer_ring (ch, 0); /* RLD DEBUG */
- }
- }
- musycc_chan_restart (ch);
- break;
- case ERR_BUF:
- if (tx)
- {
- ch->s.tx_fifo_errors++;
- ch->ch_start_tx = CH_START_TX_BUF;
- /*
- * Per MUSYCC manual, Section 6.4.8.3 [Transmit Errors],
- * this BUFF error requires Transmit channel reactivation.
- */
- if (cxt1e1_log_level >= LOG_MONITOR)
- pr_info("%s: TX buffer underrun [BUFF] on channel %d, mode %x\n",
- ci->devname, ch->channum, ch->p.chan_mode);
- } else /* RX buffer overrun */
- {
- ch->s.rx_over_errors++;
- /*
- * Per MUSYCC manual, Section 6.4.8.4 [Receive Errors], HDLC
- * mode requires NO recovery for this RX BUFF error is
- * required. It is suggested to increase the FIFO buffer
- * space for this channel. Receive channel reactivation is
- * not required, but data has been lost.
- */
- if (cxt1e1_log_level >= LOG_WARN)
- pr_info("%s: RX buffer overrun [BUFF] on channel %d, mode %x\n",
- ci->devname, ch->channum, ch->p.chan_mode);
- /*
- * Per MUSYCC manual, Section 6.4.9.4 [Receive Errors],
- * Transparent mode DOES require recovery for the RX BUFF
- * error. It is suggested to increase the FIFO buffer space
- * for this channel. Receive channel reactivation IS
- * required and data has been lost.
- */
- if (ch->p.chan_mode == CFG_CH_PROTO_TRANS)
- ch->ch_start_rx = CH_START_RX_BUF;
- }
+ if (cxt1e1_log_level >= LOG_WARN) {
+ pr_info("%s: RX buffer overflow [ONR] on channel %d, mode %x\n",
+ ci->devname, ch->channum, ch->p.chan_mode);
+ //musycc_dump_rxbuffer_ring (ch, 0); /* RLD DEBUG */
+ }
+ }
+ musycc_chan_restart(ch);
+ break;
+ case ERR_BUF:
+ if (tx) {
+ ch->s.tx_fifo_errors++;
+ ch->ch_start_tx = CH_START_TX_BUF;
+ /*
+ * Per MUSYCC manual, Section 6.4.8.3 [Transmit Errors],
+ * this BUFF error requires Transmit channel reactivation.
+ */
+ if (cxt1e1_log_level >= LOG_MONITOR)
+ pr_info("%s: TX buffer underrun [BUFF] on channel %d, mode %x\n",
+ ci->devname, ch->channum, ch->p.chan_mode);
+ } else { /* RX buffer overrun */
+ ch->s.rx_over_errors++;
+ /*
+ * Per MUSYCC manual, Section 6.4.8.4 [Receive Errors], HDLC
+ * mode requires NO recovery for this RX BUFF error is
+ * required. It is suggested to increase the FIFO buffer
+ * space for this channel. Receive channel reactivation is
+ * not required, but data has been lost.
+ */
+ if (cxt1e1_log_level >= LOG_WARN)
+ pr_info("%s: RX buffer overrun [BUFF] on channel %d, mode %x\n",
+ ci->devname, ch->channum, ch->p.chan_mode);
+ /*
+ * Per MUSYCC manual, Section 6.4.9.4 [Receive Errors],
+ * Transparent mode DOES require recovery for the RX BUFF
+ * error. It is suggested to increase the FIFO buffer space
+ * for this channel. Receive channel reactivation IS
+ * required and data has been lost.
+ */
+ if (ch->p.chan_mode == CFG_CH_PROTO_TRANS)
+ ch->ch_start_rx = CH_START_RX_BUF;
+ }
- if (tx || (ch->p.chan_mode == CFG_CH_PROTO_TRANS))
- musycc_chan_restart (ch);
- break;
- default:
- break;
- } /* switch on err */
+ if (tx || (ch->p.chan_mode == CFG_CH_PROTO_TRANS))
+ musycc_chan_restart(ch);
+ break;
+ default:
+ break;
+ } /* switch on err */
- /* Check for interrupt lost condition */
- if ((currInt & INTRPT_ILOST_M) && (cxt1e1_log_level >= LOG_ERROR))
- {
- pr_info("%s: Interrupt queue overflow - ILOST asserted\n",
- ci->devname);
- }
- ci->iqp_headx = (headx + 1) & (INT_QUEUE_SIZE - 1); /* insure wrapness */
- FLUSH_MEM_WRITE ();
- FLUSH_MEM_READ ();
+ /* Check for interrupt lost condition */
+ if ((currInt & INTRPT_ILOST_M) && (cxt1e1_log_level >= LOG_ERROR))
+ pr_info("%s: Interrupt queue overflow - ILOST asserted\n",
+ ci->devname);
+ ci->iqp_headx = (headx + 1) & (INT_QUEUE_SIZE - 1); /* insure wrapness */
+ FLUSH_MEM_WRITE();
+ FLUSH_MEM_READ();
} /* while */
- if ((cxt1e1_log_level >= LOG_MONITOR2) && (ci->iqp_headx != ci->iqp_tailx))
- {
- int bh;
+ if ((cxt1e1_log_level >= LOG_MONITOR2) && (ci->iqp_headx != ci->iqp_tailx)) {
+ int bh;
- bh = atomic_read (&CI->bh_pending);
- pr_info("_bh_: late arrivals, head %d != tail %d, pending %d\n",
- ci->iqp_headx, ci->iqp_tailx, bh);
+ bh = atomic_read(&CI->bh_pending);
+ pr_info("_bh_: late arrivals, head %d != tail %d, pending %d\n",
+ ci->iqp_headx, ci->iqp_tailx, bh);
}
#if defined(SBE_ISR_IMMEDIATE)
return 0L;
@@ -1634,14 +1517,14 @@
#if 0
int __init
-musycc_new_chan (ci_t * ci, int channum, void *user)
+musycc_new_chan(ci_t * ci, int channum, void *user)
{
mch_t *ch;
ch = ci->port[channum / MUSYCC_NCHANS].chan[channum % MUSYCC_NCHANS];
if (ch->state != UNASSIGNED)
- return EEXIST;
+ return EEXIST;
/* NOTE: mch_t already cleared during OS_kmalloc() */
ch->state = DOWN;
ch->user = user;
@@ -1653,8 +1536,8 @@
ch->p.chan_mode = CFG_CH_PROTO_HDLC_FCS16;
ch->p.idlecode = CFG_CH_FLAG_7E;
ch->p.pad_fill_count = 2;
- spin_lock_init (&ch->ch_rxlock);
- spin_lock_init (&ch->ch_txlock);
+ spin_lock_init(&ch->ch_rxlock);
+ spin_lock_init(&ch->ch_txlock);
return 0;
}
@@ -1663,53 +1546,49 @@
#ifdef SBE_PMCC4_ENABLE
status_t
-musycc_chan_down (ci_t * dummy, int channum)
+musycc_chan_down(ci_t * dummy, int channum)
{
mpi_t *pi;
mch_t *ch;
int i, gchan;
- if (!(ch = sd_find_chan (dummy, channum)))
- return EINVAL;
+ if (!(ch = sd_find_chan(dummy, channum)))
+ return EINVAL;
pi = ch->up;
gchan = ch->gchan;
/* Deactivate the channel */
- musycc_serv_req (pi, SR_CHANNEL_DEACTIVATE | SR_RX_DIRECTION | gchan);
+ musycc_serv_req(pi, SR_CHANNEL_DEACTIVATE | SR_RX_DIRECTION | gchan);
ch->ch_start_rx = 0;
- musycc_serv_req (pi, SR_CHANNEL_DEACTIVATE | SR_TX_DIRECTION | gchan);
+ musycc_serv_req(pi, SR_CHANNEL_DEACTIVATE | SR_TX_DIRECTION | gchan);
ch->ch_start_tx = 0;
if (ch->state == DOWN)
- return 0;
+ return 0;
ch->state = DOWN;
pi->regram->thp[gchan] = 0;
pi->regram->tmp[gchan] = 0;
pi->regram->rhp[gchan] = 0;
pi->regram->rmp[gchan] = 0;
- FLUSH_MEM_WRITE ();
+ FLUSH_MEM_WRITE();
for (i = 0; i < ch->txd_num; i++)
- {
- if (ch->mdt[i].mem_token != 0)
- OS_mem_token_free (ch->mdt[i].mem_token);
- }
+ if (ch->mdt[i].mem_token != 0)
+ OS_mem_token_free(ch->mdt[i].mem_token);
for (i = 0; i < ch->rxd_num; i++)
- {
- if (ch->mdr[i].mem_token != 0)
- OS_mem_token_free (ch->mdr[i].mem_token);
- }
+ if (ch->mdr[i].mem_token != 0)
+ OS_mem_token_free(ch->mdr[i].mem_token);
- OS_kfree (ch->mdr);
+ OS_kfree(ch->mdr);
ch->mdr = 0;
ch->rxd_num = 0;
- OS_kfree (ch->mdt);
+ OS_kfree(ch->mdt);
ch->mdt = 0;
ch->txd_num = 0;
- musycc_update_timeslots (pi);
- c4_fifo_free (pi, ch->gchan);
+ musycc_update_timeslots(pi);
+ c4_fifo_free(pi, ch->gchan);
pi->openchans--;
return 0;
@@ -1718,38 +1597,38 @@
int
-musycc_del_chan (ci_t * ci, int channum)
+musycc_del_chan(ci_t * ci, int channum)
{
mch_t *ch;
if ((channum < 0) || (channum >= (MUSYCC_NPORTS * MUSYCC_NCHANS))) /* sanity chk param */
- return ECHRNG;
- if (!(ch = sd_find_chan (ci, channum)))
- return ENOENT;
+ return ECHRNG;
+ if (!(ch = sd_find_chan(ci, channum)))
+ return ENOENT;
if (ch->state == UP)
- musycc_chan_down (ci, channum);
+ musycc_chan_down(ci, channum);
ch->state = UNASSIGNED;
return 0;
}
int
-musycc_del_chan_stats (ci_t * ci, int channum)
+musycc_del_chan_stats(ci_t * ci, int channum)
{
mch_t *ch;
if (channum < 0 || channum >= (MUSYCC_NPORTS * MUSYCC_NCHANS)) /* sanity chk param */
- return ECHRNG;
- if (!(ch = sd_find_chan (ci, channum)))
- return ENOENT;
+ return ECHRNG;
+ if (!(ch = sd_find_chan(ci, channum)))
+ return ENOENT;
- memset (&ch->s, 0, sizeof (struct sbecom_chan_stats));
+ memset(&ch->s, 0, sizeof(struct sbecom_chan_stats));
return 0;
}
int
-musycc_start_xmit (ci_t * ci, int channum, void *mem_token)
+musycc_start_xmit(ci_t * ci, int channum, void *mem_token)
{
mch_t *ch;
struct mdesc *md;
@@ -1760,16 +1639,16 @@
int txd_need_cnt;
u_int32_t len;
- if (!(ch = sd_find_chan (ci, channum)))
- return -ENOENT;
+ if (!(ch = sd_find_chan(ci, channum)))
+ return -ENOENT;
if (ci->state != C_RUNNING) /* full interrupt processing available */
- return -EINVAL;
+ return -EINVAL;
if (ch->state != UP)
- return -EINVAL;
+ return -EINVAL;
if (!(ch->status & TX_ENABLED))
- return -EROFS; /* how else to flag unwritable state ? */
+ return -EROFS; /* how else to flag unwritable state ? */
#ifdef RLD_TRANS_DEBUGx
if (1 || cxt1e1_log_level >= LOG_MONITOR2)
@@ -1777,66 +1656,58 @@
if (cxt1e1_log_level >= LOG_MONITOR2)
#endif
{
- pr_info("++ start_xmt[%d]: state %x start %x full %d free %d required %d stopped %x\n",
- channum, ch->state, ch->ch_start_tx, ch->tx_full,
- ch->txd_free, ch->txd_required, sd_queue_stopped (ch->user));
+ pr_info("++ start_xmt[%d]: state %x start %x full %d free %d required %d stopped %x\n",
+ channum, ch->state, ch->ch_start_tx, ch->tx_full,
+ ch->txd_free, ch->txd_required, sd_queue_stopped(ch->user));
}
/***********************************************/
/** Determine total amount of data to be sent **/
/***********************************************/
m2 = mem_token;
txd_need_cnt = 0;
- for (len = OS_mem_token_tlen (m2); len > 0;
- m2 = (void *) OS_mem_token_next (m2))
- {
- if (!OS_mem_token_len (m2))
- continue;
- txd_need_cnt++;
- len -= OS_mem_token_len (m2);
+ for (len = OS_mem_token_tlen(m2); len > 0;
+ m2 = (void *) OS_mem_token_next(m2)) {
+ if (!OS_mem_token_len(m2))
+ continue;
+ txd_need_cnt++;
+ len -= OS_mem_token_len(m2);
}
- if (txd_need_cnt == 0)
- {
- if (cxt1e1_log_level >= LOG_MONITOR2)
- pr_info("%s channel %d: no TX data in User buffer\n", ci->devname, channum);
- OS_mem_token_free (mem_token);
- return 0; /* no data to send */
+ if (txd_need_cnt == 0) {
+ if (cxt1e1_log_level >= LOG_MONITOR2)
+ pr_info("%s channel %d: no TX data in User buffer\n", ci->devname, channum);
+ OS_mem_token_free(mem_token);
+ return 0; /* no data to send */
}
/*************************************************/
/** Are there sufficient descriptors available? **/
/*************************************************/
- if (txd_need_cnt > ch->txd_num) /* never enough descriptors for this
- * large a buffer */
- {
- if (cxt1e1_log_level >= LOG_DEBUG)
- {
- pr_info("start_xmit: discarding buffer, insufficient descriptor cnt %d, need %d.\n",
- ch->txd_num, txd_need_cnt + 1);
- }
- ch->s.tx_dropped++;
- OS_mem_token_free (mem_token);
- return 0;
+ if (txd_need_cnt > ch->txd_num) { /* never enough descriptors for this
+ * large a buffer */
+ if (cxt1e1_log_level >= LOG_DEBUG)
+ pr_info("start_xmit: discarding buffer, insufficient descriptor cnt %d, need %d.\n",
+ ch->txd_num, txd_need_cnt + 1);
+ ch->s.tx_dropped++;
+ OS_mem_token_free(mem_token);
+ return 0;
}
#if 0
- spin_lock_irqsave (&ch->ch_txlock, flags);
+ spin_lock_irqsave(&ch->ch_txlock, flags);
#endif
/************************************************************/
/** flow control the line if not enough descriptors remain **/
/************************************************************/
- if (txd_need_cnt > ch->txd_free)
- {
- if (cxt1e1_log_level >= LOG_MONITOR2)
- {
- pr_info("start_xmit[%d]: EBUSY - need more descriptors, have %d of %d need %d\n",
- channum, ch->txd_free, ch->txd_num, txd_need_cnt);
- }
- ch->tx_full = 1;
- ch->txd_required = txd_need_cnt;
- sd_disable_xmit (ch->user);
+ if (txd_need_cnt > ch->txd_free) {
+ if (cxt1e1_log_level >= LOG_MONITOR2)
+ pr_info("start_xmit[%d]: EBUSY - need more descriptors, have %d of %d need %d\n",
+ channum, ch->txd_free, ch->txd_num, txd_need_cnt);
+ ch->tx_full = 1;
+ ch->txd_required = txd_need_cnt;
+ sd_disable_xmit(ch->user);
#if 0
- spin_unlock_irqrestore (&ch->ch_txlock, flags);
+ spin_unlock_irqrestore(&ch->ch_txlock, flags);
#endif
- return -EBUSY; /* tell user to try again later */
+ return -EBUSY; /* tell user to try again later */
}
/**************************************************/
/** Put the user data into MUSYCC data buffer(s) **/
@@ -1844,74 +1715,71 @@
m2 = mem_token;
md = ch->txd_usr_add; /* get current available descriptor */
- for (len = OS_mem_token_tlen (m2); len > 0; m2 = OS_mem_token_next (m2))
- {
- int u = OS_mem_token_len (m2);
+ for (len = OS_mem_token_tlen(m2); len > 0; m2 = OS_mem_token_next(m2)) {
+ int u = OS_mem_token_len(m2);
- if (!u)
- continue;
- len -= u;
+ if (!u)
+ continue;
+ len -= u;
- /*
- * Enable following chunks, yet wait to enable the FIRST chunk until
- * after ALL subsequent chunks are setup.
- */
- if (md != ch->txd_usr_add) /* not first chunk */
- u |= MUSYCC_TX_OWNED; /* transfer ownership from HOST to MUSYCC */
+ /*
+ * Enable following chunks, yet wait to enable the FIRST chunk until
+ * after ALL subsequent chunks are setup.
+ */
+ if (md != ch->txd_usr_add) /* not first chunk */
+ u |= MUSYCC_TX_OWNED; /* transfer ownership from HOST to MUSYCC */
- if (len) /* not last chunk */
- u |= EOBIRQ_ENABLE;
- else if (ch->p.chan_mode == CFG_CH_PROTO_TRANS)
- {
- /*
- * Per MUSYCC Ref 6.4.9 for Transparent Mode, the host must
- * always clear EOMIRQ_ENABLE in every Transmit Buffer Descriptor
- * (IE. don't set herein).
- */
- u |= EOBIRQ_ENABLE;
- } else
- u |= EOMIRQ_ENABLE; /* EOM, last HDLC chunk */
+ if (len) /* not last chunk */
+ u |= EOBIRQ_ENABLE;
+ else if (ch->p.chan_mode == CFG_CH_PROTO_TRANS) {
+ /*
+ * Per MUSYCC Ref 6.4.9 for Transparent Mode, the host must
+ * always clear EOMIRQ_ENABLE in every Transmit Buffer Descriptor
+ * (IE. don't set herein).
+ */
+ u |= EOBIRQ_ENABLE;
+ } else
+ u |= EOMIRQ_ENABLE; /* EOM, last HDLC chunk */
- /* last chunk in hdlc mode */
- u |= (ch->p.idlecode << IDLE_CODE);
- if (ch->p.pad_fill_count)
- {
+ /* last chunk in hdlc mode */
+ u |= (ch->p.idlecode << IDLE_CODE);
+ if (ch->p.pad_fill_count) {
#if 0
- /* NOOP NOTE: u_int8_t cannot be > 0xFF */
- /* sanitize pad_fill_count for maximums allowed by hardware */
- if (ch->p.pad_fill_count > EXTRA_FLAGS_MASK)
- ch->p.pad_fill_count = EXTRA_FLAGS_MASK;
+ /* NOOP NOTE: u_int8_t cannot be > 0xFF */
+ /* sanitize pad_fill_count for maximums allowed by hardware */
+ if (ch->p.pad_fill_count > EXTRA_FLAGS_MASK)
+ ch->p.pad_fill_count = EXTRA_FLAGS_MASK;
#endif
- u |= (PADFILL_ENABLE | (ch->p.pad_fill_count << EXTRA_FLAGS));
- }
- md->mem_token = len ? 0 : mem_token; /* Fill in mds on last
- * segment, others set ZERO
- * so that entire token is
- * removed ONLY when ALL
- * segments have been
- * transmitted. */
+ u |= (PADFILL_ENABLE | (ch->p.pad_fill_count << EXTRA_FLAGS));
+ }
+ md->mem_token = len ? 0 : mem_token; /* Fill in mds on last
+ * segment, others set ZERO
+ * so that entire token is
+ * removed ONLY when ALL
+ * segments have been
+ * transmitted. */
- md->data = cpu_to_le32 (OS_vtophys (OS_mem_token_data (m2)));
- FLUSH_MEM_WRITE ();
- md->status = cpu_to_le32 (u);
- --ch->txd_free;
- md = md->snext;
+ md->data = cpu_to_le32(OS_vtophys(OS_mem_token_data(m2)));
+ FLUSH_MEM_WRITE();
+ md->status = cpu_to_le32(u);
+ --ch->txd_free;
+ md = md->snext;
}
- FLUSH_MEM_WRITE ();
+ FLUSH_MEM_WRITE();
/*
* Now transfer ownership of first chunk from HOST to MUSYCC in order to
* fire-off this XMIT.
*/
- ch->txd_usr_add->status |= __constant_cpu_to_le32 (MUSYCC_TX_OWNED);
- FLUSH_MEM_WRITE ();
+ ch->txd_usr_add->status |= __constant_cpu_to_le32(MUSYCC_TX_OWNED);
+ FLUSH_MEM_WRITE();
ch->txd_usr_add = md;
- len = OS_mem_token_tlen (mem_token);
- atomic_add (len, &ch->tx_pending);
- atomic_add (len, &ci->tx_pending);
+ len = OS_mem_token_tlen(mem_token);
+ atomic_add(len, &ch->tx_pending);
+ atomic_add(len, &ci->tx_pending);
ch->s.tx_packets++;
ch->s.tx_bytes += len;
/*
@@ -1919,11 +1787,9 @@
* transmission.
*/
if (ch->ch_start_tx)
- {
- musycc_chan_restart (ch);
- }
+ musycc_chan_restart(ch);
#ifdef SBE_WAN256T3_ENABLE
- wan256t3_led (ci, LED_TX, LEDV_G);
+ wan256t3_led(ci, LED_TX, LEDV_G);
#endif
return 0;
}
diff --git a/drivers/staging/cxt1e1/musycc.h b/drivers/staging/cxt1e1/musycc.h
index cf6b54e..56fb42f 100644
--- a/drivers/staging/cxt1e1/musycc.h
+++ b/drivers/staging/cxt1e1/musycc.h
@@ -48,59 +48,57 @@
#define INT_QUEUE_SIZE MUSYCC_NIQD
/* RAM image of MUSYCC registers laid out as a C structure */
- struct musycc_groupr
- {
- VINT32 thp[32]; /* Transmit Head Pointer [5-29] */
- VINT32 tmp[32]; /* Transmit Message Pointer [5-30] */
- VINT32 rhp[32]; /* Receive Head Pointer [5-29] */
- VINT32 rmp[32]; /* Receive Message Pointer [5-30] */
- VINT8 ttsm[128]; /* Time Slot Map [5-22] */
- VINT8 tscm[256]; /* Subchannel Map [5-24] */
- VINT32 tcct[32]; /* Channel Configuration [5-26] */
- VINT8 rtsm[128]; /* Time Slot Map [5-22] */
- VINT8 rscm[256]; /* Subchannel Map [5-24] */
- VINT32 rcct[32]; /* Channel Configuration [5-26] */
- VINT32 __glcd; /* Global Configuration Descriptor [5-10] */
- VINT32 __iqp; /* Interrupt Queue Pointer [5-36] */
- VINT32 __iql; /* Interrupt Queue Length [5-36] */
- VINT32 grcd; /* Group Configuration Descriptor [5-16] */
- VINT32 mpd; /* Memory Protection Descriptor [5-18] */
- VINT32 mld; /* Message Length Descriptor [5-20] */
- VINT32 pcd; /* Port Configuration Descriptor [5-19] */
- };
+struct musycc_groupr {
+ VINT32 thp[32]; /* Transmit Head Pointer [5-29] */
+ VINT32 tmp[32]; /* Transmit Message Pointer [5-30] */
+ VINT32 rhp[32]; /* Receive Head Pointer [5-29] */
+ VINT32 rmp[32]; /* Receive Message Pointer [5-30] */
+ VINT8 ttsm[128]; /* Time Slot Map [5-22] */
+ VINT8 tscm[256]; /* Subchannel Map [5-24] */
+ VINT32 tcct[32]; /* Channel Configuration [5-26] */
+ VINT8 rtsm[128]; /* Time Slot Map [5-22] */
+ VINT8 rscm[256]; /* Subchannel Map [5-24] */
+ VINT32 rcct[32]; /* Channel Configuration [5-26] */
+ VINT32 __glcd; /* Global Configuration Descriptor [5-10] */
+ VINT32 __iqp; /* Interrupt Queue Pointer [5-36] */
+ VINT32 __iql; /* Interrupt Queue Length [5-36] */
+ VINT32 grcd; /* Group Configuration Descriptor [5-16] */
+ VINT32 mpd; /* Memory Protection Descriptor [5-18] */
+ VINT32 mld; /* Message Length Descriptor [5-20] */
+ VINT32 pcd; /* Port Configuration Descriptor [5-19] */
+};
/* hardware MUSYCC registers laid out as a C structure */
- struct musycc_globalr
- {
- VINT32 gbp; /* Group Base Pointer */
- VINT32 dacbp; /* Dual Address Cycle Base Pointer */
- VINT32 srd; /* Service Request Descriptor */
- VINT32 isd; /* Interrupt Service Descriptor */
- /*
- * adjust __thp due to above 4 registers, which are not contained
- * within musycc_groupr[]. All __XXX[] are just place holders,
- * anyhow.
- */
- VINT32 __thp[32 - 4]; /* Transmit Head Pointer [5-29] */
- VINT32 __tmp[32]; /* Transmit Message Pointer [5-30] */
- VINT32 __rhp[32]; /* Receive Head Pointer [5-29] */
- VINT32 __rmp[32]; /* Receive Message Pointer [5-30] */
- VINT8 ttsm[128]; /* Time Slot Map [5-22] */
- VINT8 tscm[256]; /* Subchannel Map [5-24] */
- VINT32 tcct[32]; /* Channel Configuration [5-26] */
- VINT8 rtsm[128]; /* Time Slot Map [5-22] */
- VINT8 rscm[256]; /* Subchannel Map [5-24] */
- VINT32 rcct[32]; /* Channel Configuration [5-26] */
- VINT32 glcd; /* Global Configuration Descriptor [5-10] */
- VINT32 iqp; /* Interrupt Queue Pointer [5-36] */
- VINT32 iql; /* Interrupt Queue Length [5-36] */
- VINT32 grcd; /* Group Configuration Descriptor [5-16] */
- VINT32 mpd; /* Memory Protection Descriptor [5-18] */
- VINT32 mld; /* Message Length Descriptor [5-20] */
- VINT32 pcd; /* Port Configuration Descriptor [5-19] */
- VINT32 rbist; /* Receive BIST status [5-4] */
- VINT32 tbist; /* Receive BIST status [5-4] */
- };
+struct musycc_globalr {
+ VINT32 gbp; /* Group Base Pointer */
+ VINT32 dacbp; /* Dual Address Cycle Base Pointer */
+ VINT32 srd; /* Service Request Descriptor */
+ VINT32 isd; /* Interrupt Service Descriptor */
+ /*
+ * adjust __thp due to above 4 registers, which are not contained
+ * within musycc_groupr[]. All __XXX[] are just place holders,
+ * anyhow.
+ */
+ VINT32 __thp[32 - 4]; /* Transmit Head Pointer [5-29] */
+ VINT32 __tmp[32]; /* Transmit Message Pointer [5-30] */
+ VINT32 __rhp[32]; /* Receive Head Pointer [5-29] */
+ VINT32 __rmp[32]; /* Receive Message Pointer [5-30] */
+ VINT8 ttsm[128]; /* Time Slot Map [5-22] */
+ VINT8 tscm[256]; /* Subchannel Map [5-24] */
+ VINT32 tcct[32]; /* Channel Configuration [5-26] */
+ VINT8 rtsm[128]; /* Time Slot Map [5-22] */
+ VINT8 rscm[256]; /* Subchannel Map [5-24] */
+ VINT32 rcct[32]; /* Channel Configuration [5-26] */
+ VINT32 glcd; /* Global Configuration Descriptor [5-10] */
+ VINT32 iqp; /* Interrupt Queue Pointer [5-36] */
+ VINT32 iql; /* Interrupt Queue Length [5-36] */
+ VINT32 grcd; /* Group Configuration Descriptor [5-16] */
+ VINT32 mpd; /* Memory Protection Descriptor [5-18] */
+ VINT32 mld; /* Message Length Descriptor [5-20] */
+ VINT32 pcd; /* Port Configuration Descriptor [5-19] */
+ VINT32 rbist; /* Receive BIST status [5-4] */
+ VINT32 tbist; /* Receive BIST status [5-4] */
+};
/* Global Config Descriptor bit macros */
#define MUSYCC_GCD_ECLK_ENABLE 0x00000800 /* EBUS clock enable */
@@ -108,18 +106,18 @@
#define MUSYCC_GCD_INTA_DISABLE 0x00000008 /* PCI INTA disable */
#define MUSYCC_GCD_INTB_DISABLE 0x00000004 /* PCI INTB disable */
#define MUSYCC_GCD_BLAPSE 12 /* Position index for BLAPSE bit
- * field */
+ * field */
#define MUSYCC_GCD_ALAPSE 8 /* Position index for ALAPSE bit
- * field */
+ * field */
#define MUSYCC_GCD_ELAPSE 4 /* Position index for ELAPSE bit
- * field */
+ * field */
#define MUSYCC_GCD_PORTMAP_3 3 /* Reserved */
#define MUSYCC_GCD_PORTMAP_2 2 /* Port 0=>Grp 0,1,2,3; Port 1=>Grp
- * 4,5,6,7 */
+ * 4,5,6,7 */
#define MUSYCC_GCD_PORTMAP_1 1 /* Port 0=>Grp 0,1; Port 1=>Grp 2,3,
- * etc... */
+ * etc... */
#define MUSYCC_GCD_PORTMAP_0 0 /* Port 0=>Grp 0; Port 1=>Grp 2,
- * etc... */
+ * etc... */
/* and board specific assignments... */
#ifdef SBE_WAN256T3_ENABLE
@@ -137,57 +135,57 @@
#endif
#define GCD_MAGIC (((BLAPSE_VAL)<<(MUSYCC_GCD_BLAPSE)) | \
- ((ALAPSE_VAL)<<(MUSYCC_GCD_ALAPSE)) | \
- ((ELAPSE_VAL)<<(MUSYCC_GCD_ELAPSE)) | \
- (MUSYCC_GCD_ECLK_ENABLE) | PORTMAP_VAL)
+ ((ALAPSE_VAL)<<(MUSYCC_GCD_ALAPSE)) | \
+ ((ELAPSE_VAL)<<(MUSYCC_GCD_ELAPSE)) | \
+ (MUSYCC_GCD_ECLK_ENABLE) | PORTMAP_VAL)
/* Group Config Descriptor bit macros */
#define MUSYCC_GRCD_RX_ENABLE 0x00000001 /* Enable receive processing */
#define MUSYCC_GRCD_TX_ENABLE 0x00000002 /* Enable transmit processing */
#define MUSYCC_GRCD_SUBCHAN_DISABLE 0x00000004 /* Master disable for
- * subchanneling */
+ * subchanneling */
#define MUSYCC_GRCD_OOFMP_DISABLE 0x00000008 /* Out of Frame message
- * processing disabled all
- * channels */
+ * processing disabled all
+ * channels */
#define MUSYCC_GRCD_OOFIRQ_DISABLE 0x00000010 /* Out of Frame/In Frame irqs
- * disabled */
+ * disabled */
#define MUSYCC_GRCD_COFAIRQ_DISABLE 0x00000020 /* Change of Frame Alignment
- * irq disabled */
+ * irq disabled */
#define MUSYCC_GRCD_INHRBSD 0x00000100 /* Receive Buffer Status
- * overwrite disabled */
+ * overwrite disabled */
#define MUSYCC_GRCD_INHTBSD 0x00000200 /* Transmit Buffer Status
- * overwrite disabled */
+ * overwrite disabled */
#define MUSYCC_GRCD_SF_ALIGN 0x00008000 /* External frame sync */
#define MUSYCC_GRCD_MC_ENABLE 0x00000040 /* Message configuration bits
- * copy enable. Conexant sez
- * turn this on */
+ * copy enable. Conexant sez
+ * turn this on */
#define MUSYCC_GRCD_POLLTH_16 0x00000001 /* Poll every 16th frame */
#define MUSYCC_GRCD_POLLTH_32 0x00000002 /* Poll every 32nd frame */
#define MUSYCC_GRCD_POLLTH_64 0x00000003 /* Poll every 64th frame */
#define MUSYCC_GRCD_POLLTH_SHIFT 10 /* Position index for poll throttle
- * bit field */
+ * bit field */
#define MUSYCC_GRCD_SUERM_THRESH_SHIFT 16 /* Position index for SUERM
- * count threshold */
+ * count threshold */
/* Port Config Descriptor bit macros */
#define MUSYCC_PCD_E1X2_MODE 2 /* Port mode in bits 0-2. T1 and E1 */
#define MUSYCC_PCD_E1X4_MODE 3 /* are defined in cn847x.h */
#define MUSYCC_PCD_NX64_MODE 4
#define MUSYCC_PCD_TXDATA_RISING 0x00000010 /* Sample Tx data on TCLK
- * rising edge */
+ * rising edge */
#define MUSYCC_PCD_TXSYNC_RISING 0x00000020 /* Sample Tx frame sync on
- * TCLK rising edge */
+ * TCLK rising edge */
#define MUSYCC_PCD_RXDATA_RISING 0x00000040 /* Sample Rx data on RCLK
- * rising edge */
+ * rising edge */
#define MUSYCC_PCD_RXSYNC_RISING 0x00000080 /* Sample Rx frame sync on
- * RCLK rising edge */
+ * RCLK rising edge */
#define MUSYCC_PCD_ROOF_RISING 0x00000100 /* Sample Rx Out Of Frame
- * signal on RCLK rising edge */
+ * signal on RCLK rising edge */
#define MUSYCC_PCD_TX_DRIVEN 0x00000200 /* No mapped timeslots causes
- * logic 1 on output, else
- * tristate */
+ * logic 1 on output, else
+ * tristate */
#define MUSYCC_PCD_PORTMODE_MASK 0xfffffff8 /* For changing the port mode
- * between E1 and T1 */
+ * between E1 and T1 */
/* Time Slot Descriptor bit macros */
#define MUSYCC_TSD_MODE_64KBPS 4
@@ -202,17 +200,17 @@
#define MUSYCC_CCD_BUFIRQ_DISABLE 0x00000002 /* BUFF and ONR irqs disabled */
#define MUSYCC_CCD_EOMIRQ_DISABLE 0x00000004 /* EOM irq disabled */
#define MUSYCC_CCD_MSGIRQ_DISABLE 0x00000008 /* LNG, FCS, ALIGN, and ABT
- * irqs disabled */
+ * irqs disabled */
#define MUSYCC_CCD_IDLEIRQ_DISABLE 0x00000010 /* CHABT, CHIC, and SHT irqs
- * disabled */
+ * disabled */
#define MUSYCC_CCD_FILTIRQ_DISABLE 0x00000020 /* SFILT irq disabled */
#define MUSYCC_CCD_SDECIRQ_DISABLE 0x00000040 /* SDEC irq disabled */
#define MUSYCC_CCD_SINCIRQ_DISABLE 0x00000080 /* SINC irq disabled */
#define MUSYCC_CCD_SUERIRQ_DISABLE 0x00000100 /* SUERR irq disabled */
#define MUSYCC_CCD_FCS_XFER 0x00000200 /* Propagate FCS along with
- * received data */
+ * received data */
#define MUSYCC_CCD_PROTO_SHIFT 12 /* Position index for protocol bit
- * field */
+ * field */
#define MUSYCC_CCD_TRANS 0 /* Protocol mode in bits 12-14 */
#define MUSYCC_CCD_SS7 1
#define MUSYCC_CCD_HDLC_FCS16 2
@@ -220,11 +218,11 @@
#define MUSYCC_CCD_EOPIRQ_DISABLE 0x00008000 /* EOP irq disabled */
#define MUSYCC_CCD_INVERT_DATA 0x00800000 /* Invert data */
#define MUSYCC_CCD_MAX_LENGTH 10 /* Position index for max length bit
- * field */
+ * field */
#define MUSYCC_CCD_BUFFER_LENGTH 16 /* Position index for internal data
- * buffer length */
+ * buffer length */
#define MUSYCC_CCD_BUFFER_LOC 24 /* Position index for internal data
- * buffer starting location */
+ * buffer starting location */
/****************************************************************************
* Interrupt Descriptor Information */
@@ -266,7 +264,7 @@
#define INTRPT_GRP_S 29
#define INTRPT_GRP_MSB_S 12
#define INTRPT_GRP(x) (((x & INTRPT_GRP_M) >> INTRPT_GRP_S) | \
- ((x & INTRPT_GRP_MSB_M) >> INTRPT_GRP_MSB_S))
+ ((x & INTRPT_GRP_MSB_M) >> INTRPT_GRP_MSB_S))
#define INTRPT_CH_M 0x1F000000
#define INTRPT_CH_S 24
@@ -295,82 +293,82 @@
/* Buffer Descriptor bit macros */
#define OWNER_BIT 0x80000000 /* Set for MUSYCC owner on xmit, host
- * owner on receive */
+ * owner on receive */
#define HOST_TX_OWNED 0x00000000 /* Host owns descriptor */
#define MUSYCC_TX_OWNED 0x80000000 /* MUSYCC owns descriptor */
#define HOST_RX_OWNED 0x80000000 /* Host owns descriptor */
#define MUSYCC_RX_OWNED 0x00000000 /* MUSYCC owns descriptor */
#define POLL_DISABLED 0x40000000 /* MUSYCC not allowed to poll buffer
- * for ownership */
+ * for ownership */
#define EOMIRQ_ENABLE 0x20000000 /* This buffer contains the end of
- * the message */
+ * the message */
#define EOBIRQ_ENABLE 0x10000000 /* EOB irq enabled */
#define PADFILL_ENABLE 0x01000000 /* Enable padfill */
#define REPEAT_BIT 0x00008000 /* Bit on for FISU descriptor */
#define LENGTH_MASK 0X3fff /* This part of status descriptor is
- * length */
+ * length */
#define IDLE_CODE 25 /* Position index for idle code (2
- * bits) */
+ * bits) */
#define EXTRA_FLAGS 16 /* Position index for minimum flags
- * between messages (8 bits) */
+ * between messages (8 bits) */
#define IDLE_CODE_MASK 0x03 /* Gets rid of garbage before the
- * pattern is OR'd in */
+ * pattern is OR'd in */
#define EXTRA_FLAGS_MASK 0xff /* Gets rid of garbage before the
- * pattern is OR'd in */
+ * pattern is OR'd in */
#define PCI_PERMUTED_OWNER_BIT 0x00000080 /* For flipping the bit on
- * the polled mode descriptor */
+ * the polled mode descriptor */
/* Service Request Descriptor bit macros */
#define SREQ 8 /* Position index for service request bit
- * field */
+ * field */
#define SR_NOOP (0<<(SREQ)) /* No Operation. Generates SACK */
#define SR_CHIP_RESET (1<<(SREQ)) /* Soft chip reset */
#define SR_GROUP_RESET (2<<(SREQ)) /* Group reset */
#define SR_GLOBAL_INIT (4<<(SREQ)) /* Global init: read global
- * config deswc and interrupt
- * queue desc */
+ * config deswc and interrupt
+ * queue desc */
#define SR_GROUP_INIT (5<<(SREQ)) /* Group init: read Timeslot
- * and Subchannel maps,
- * Channel Config, */
+ * and Subchannel maps,
+ * Channel Config, */
/*
* Group Config, Memory Protect, Message Length, and Port Config
* Descriptors
*/
#define SR_CHANNEL_ACTIVATE (8<<(SREQ)) /* Init channel, read Head
- * Pointer, process first
- * Message Descriptor */
+ * Pointer, process first
+ * Message Descriptor */
#define SR_GCHANNEL_MASK 0x001F /* channel portion (gchan) */
#define SR_CHANNEL_DEACTIVATE (9<<(SREQ)) /* Stop channel processing */
#define SR_JUMP (10<<(SREQ)) /* a: Process new Message
- * List */
+ * List */
#define SR_CHANNEL_CONFIG (11<<(SREQ)) /* b: Read channel
- * Configuration Descriptor */
+ * Configuration Descriptor */
#define SR_GLOBAL_CONFIG (16<<(SREQ)) /* 10: Read Global
- * Configuration Descriptor */
+ * Configuration Descriptor */
#define SR_INTERRUPT_Q (17<<(SREQ)) /* 11: Read Interrupt Queue
- * Descriptor */
+ * Descriptor */
#define SR_GROUP_CONFIG (18<<(SREQ)) /* 12: Read Group
- * Configuration Descriptor */
+ * Configuration Descriptor */
#define SR_MEMORY_PROTECT (19<<(SREQ)) /* 13: Read Memory Protection
- * Descriptor */
+ * Descriptor */
#define SR_MESSAGE_LENGTH (20<<(SREQ)) /* 14: Read Message Length
- * Descriptor */
+ * Descriptor */
#define SR_PORT_CONFIG (21<<(SREQ)) /* 15: Read Port
- * Configuration Descriptor */
+ * Configuration Descriptor */
#define SR_TIMESLOT_MAP (24<<(SREQ)) /* 18: Read Timeslot Map */
#define SR_SUBCHANNEL_MAP (25<<(SREQ)) /* 19: Read Subchannel Map */
#define SR_CHAN_CONFIG_TABLE (26<<(SREQ)) /* 20: Read Channel
- * Configuration Table for
- * the group */
+ * Configuration Table for
+ * the group */
#define SR_TX_DIRECTION 0x00000020 /* Transmit direction bit.
- * Bit off indicates receive
- * direction */
+ * Bit off indicates receive
+ * direction */
#define SR_RX_DIRECTION 0x00000000
/* Interrupt Descriptor bit macros */
#define GROUP10 29 /* Position index for the 2 LS group
- * bits */
+ * bits */
#define CHANNEL 24 /* Position index for channel bits */
#define INT_IQD_TX 0x80000000
#define INT_IQD_GRP 0x60000000
@@ -384,7 +382,7 @@
/* Interrupt Descriptor Events */
#define EVE_EVENT 20 /* Position index for event bits */
#define EVE_NONE 0 /* No event to report in this
- * interrupt */
+ * interrupt */
#define EVE_SACK 1 /* Service Request acknowledge */
#define EVE_EOB 2 /* End of Buffer */
#define EVE_EOM 3 /* End of Message */
@@ -411,12 +409,12 @@
#define ERR_PERR 15 /* PCI Parity Error */
/* Other Stuff */
#define TRANSMIT_DIRECTION 0x80000000 /* Transmit direction bit. Bit off
- * indicates receive direction */
+ * indicates receive direction */
#define ILOST 0x00008000 /* Interrupt Lost */
#define GROUPMSB 0x00004000 /* Group number MSB */
#define SACK_IMAGE 0x00100000 /* Used in IRQ for semaphore test */
#define INITIAL_STATUS 0x10000 /* IRQ status should be this after
- * reset */
+ * reset */
/* This must be defined on an entire channel group (Port) basis */
#define SUERM_THRESHOLD 0x1f
diff --git a/drivers/staging/cxt1e1/sbecrc.c b/drivers/staging/cxt1e1/sbecrc.c
index 3f3cd60a..87512a5 100644
--- a/drivers/staging/cxt1e1/sbecrc.c
+++ b/drivers/staging/cxt1e1/sbecrc.c
@@ -44,25 +44,23 @@
***************************************************************************/
static void
-genCrcTable (u_int32_t *CRCTable)
+genCrcTable(u_int32_t *CRCTable)
{
- int ii, jj;
- u_int32_t crc;
+ int ii, jj;
+ u_int32_t crc;
- for (ii = 0; ii < CRC_TABLE_ENTRIES; ii++)
- {
- crc = ii;
- for (jj = 8; jj > 0; jj--)
- {
- if (crc & 1)
- crc = (crc >> 1) ^ CRC32_POLYNOMIAL;
- else
- crc >>= 1;
- }
- CRCTable[ii] = crc;
- }
+ for (ii = 0; ii < CRC_TABLE_ENTRIES; ii++) {
+ crc = ii;
+ for (jj = 8; jj > 0; jj--) {
+ if (crc & 1)
+ crc = (crc >> 1) ^ CRC32_POLYNOMIAL;
+ else
+ crc >>= 1;
+ }
+ CRCTable[ii] = crc;
+ }
- crcTableInit++;
+ crcTableInit++;
}
@@ -85,52 +83,49 @@
*/
void
-sbeCrc (u_int8_t *buffer, /* data buffer to crc */
- u_int32_t count, /* length of block in bytes */
- u_int32_t initialCrc, /* starting CRC */
- u_int32_t *result)
+sbeCrc(u_int8_t *buffer, /* data buffer to crc */
+ u_int32_t count, /* length of block in bytes */
+ u_int32_t initialCrc, /* starting CRC */
+ u_int32_t *result)
{
- u_int32_t *tbl = 0;
- u_int32_t temp1, temp2, crc;
+ u_int32_t *tbl = 0;
+ u_int32_t temp1, temp2, crc;
- /*
- * if table not yet created, do so. Don't care about "extra" time
- * checking this every time sbeCrc() is called, since CRC calculations are
- * already time consuming
- */
- if (!crcTableInit)
- {
+ /*
+ * if table not yet created, do so. Don't care about "extra" time
+ * checking this every time sbeCrc() is called, since CRC calculations
+ * are already time consuming
+ */
+ if (!crcTableInit) {
#ifdef STATIC_CRC_TABLE
- tbl = &CRCTable;
- genCrcTable (tbl);
+ tbl = &CRCTable;
+ genCrcTable(tbl);
#else
- tbl = (u_int32_t *) OS_kmalloc (CRC_TABLE_ENTRIES * sizeof (u_int32_t));
- if (tbl == 0)
- {
- *result = 0; /* dummy up return value due to malloc
- * failure */
- return;
- }
- genCrcTable (tbl);
+ tbl = (u_int32_t *) OS_kmalloc(CRC_TABLE_ENTRIES * sizeof(u_int32_t));
+ if (tbl == 0) {
+ *result = 0; /* dummy up return value due to malloc
+ * failure */
+ return;
+ }
+ genCrcTable(tbl);
#endif
- }
- /* inverting bits makes ZMODEM & PKZIP compatible */
- crc = initialCrc ^ 0xFFFFFFFFL;
+ }
+ /* inverting bits makes ZMODEM & PKZIP compatible */
+ crc = initialCrc ^ 0xFFFFFFFFL;
- while (count-- != 0)
- {
- temp1 = (crc >> 8) & 0x00FFFFFFL;
- temp2 = tbl[((int) crc ^ *buffer++) & 0xff];
- crc = temp1 ^ temp2;
- }
+ while (count-- != 0) {
+ temp1 = (crc >> 8) & 0x00FFFFFFL;
+ temp2 = tbl[((int) crc ^ *buffer++) & 0xff];
+ crc = temp1 ^ temp2;
+ }
- crc ^= 0xFFFFFFFFL;
+ crc ^= 0xFFFFFFFFL;
- *result = crc;
+ *result = crc;
#ifndef STATIC_CRC_TABLE
- crcTableInit = 0;
- OS_kfree (tbl);
+ crcTableInit = 0;
+ OS_kfree(tbl);
#endif
}
diff --git a/drivers/staging/dgrp/dgrp_common.h b/drivers/staging/dgrp/dgrp_common.h
index 05ff338..0583fe9 100644
--- a/drivers/staging/dgrp/dgrp_common.h
+++ b/drivers/staging/dgrp/dgrp_common.h
@@ -31,7 +31,6 @@
* All global storage allocation.
************************************************************************/
-extern int dgrp_rawreadok; /* Allow raw writing of input */
extern int dgrp_register_cudevices; /* enable legacy cu devices */
extern int dgrp_register_prdevices; /* enable transparent print devices */
extern int dgrp_poll_tick; /* Poll interval - in ms */
diff --git a/drivers/staging/dgrp/dgrp_dpa_ops.c b/drivers/staging/dgrp/dgrp_dpa_ops.c
index 49e6709..021cca4 100644
--- a/drivers/staging/dgrp/dgrp_dpa_ops.c
+++ b/drivers/staging/dgrp/dgrp_dpa_ops.c
@@ -387,7 +387,7 @@
port = getchan.ch_port;
- if (port < 0 || port > nd->nd_chan_count)
+ if (port > nd->nd_chan_count)
return -EINVAL;
ch = nd->nd_chan + port;
diff --git a/drivers/staging/dgrp/dgrp_driver.c b/drivers/staging/dgrp/dgrp_driver.c
index 6e4a0eb..aa26258 100644
--- a/drivers/staging/dgrp/dgrp_driver.c
+++ b/drivers/staging/dgrp/dgrp_driver.c
@@ -39,14 +39,10 @@
struct list_head nd_struct_list;
struct dgrp_poll_data dgrp_poll_data;
-int dgrp_rawreadok = 1; /* Bypass flipbuf on input */
int dgrp_register_cudevices = 1;/* Turn on/off registering legacy cu devices */
int dgrp_register_prdevices = 1;/* Turn on/off registering transparent print */
int dgrp_poll_tick = 20; /* Poll interval - in ms */
-module_param_named(rawreadok, dgrp_rawreadok, int, 0644);
-MODULE_PARM_DESC(rawreadok, "Bypass flip buffers on input");
-
module_param_named(register_cudevices, dgrp_register_cudevices, int, 0644);
MODULE_PARM_DESC(register_cudevices, "Turn on/off registering legacy cu devices");
diff --git a/drivers/staging/dgrp/dgrp_net_ops.c b/drivers/staging/dgrp/dgrp_net_ops.c
index ab839ea..2d1bbfd 100644
--- a/drivers/staging/dgrp/dgrp_net_ops.c
+++ b/drivers/staging/dgrp/dgrp_net_ops.c
@@ -151,20 +151,15 @@
* Copys the rbuf to the flipbuf and sends to line discipline.
* Sends input buffer data to the line discipline.
*
- * There are several modes to consider here:
- * rawreadok, tty->real_raw, and IF_PARMRK
*/
static void dgrp_input(struct ch_struct *ch)
{
struct nd_struct *nd;
struct tty_struct *tty;
- int remain;
int data_len;
int len;
- int flip_len;
int tty_count;
ulong lock_flags;
- struct tty_ldisc *ld;
u8 *myflipbuf;
u8 *myflipflagbuf;
@@ -212,37 +207,11 @@
spin_unlock_irqrestore(&nd->nd_lock, lock_flags);
- /* Decide how much data we can send into the tty layer */
- if (dgrp_rawreadok && tty->real_raw)
- flip_len = MYFLIPLEN;
- else
- flip_len = TTY_FLIPBUF_SIZE;
-
/* data_len should be the number of chars that we read in */
data_len = (ch->ch_rin - ch->ch_rout) & RBUF_MASK;
- remain = data_len;
/* len is the amount of data we are going to transfer here */
- len = min(data_len, flip_len);
-
- /* take into consideration length of ldisc */
- len = min(len, (N_TTY_BUF_SIZE - 1) - tty->read_cnt);
-
- ld = tty_ldisc_ref(tty);
-
- /*
- * If we were unable to get a reference to the ld,
- * don't flush our buffer, and act like the ld doesn't
- * have any space to put the data right now.
- */
- if (!ld) {
- len = 0;
- } else if (!ld->ops->receive_buf) {
- spin_lock_irqsave(&nd->nd_lock, lock_flags);
- ch->ch_rout = ch->ch_rin;
- spin_unlock_irqrestore(&nd->nd_lock, lock_flags);
- len = 0;
- }
+ len = tty_buffer_request_room(tty, data_len);
/* Check DPA flow control */
if ((nd->nd_dpa_debug) &&
@@ -254,42 +223,22 @@
dgrp_read_data_block(ch, myflipbuf, len);
- /*
- * In high performance mode, we don't have to update
- * flag_buf or any of the counts or pointers into flip buf.
- */
- if (!dgrp_rawreadok || !tty->real_raw) {
- if (I_PARMRK(tty) || I_BRKINT(tty) || I_INPCK(tty))
- parity_scan(ch, myflipbuf, myflipflagbuf, &len);
- else
- memset(myflipflagbuf, TTY_NORMAL, len);
- }
+ if (I_PARMRK(tty) || I_BRKINT(tty) || I_INPCK(tty))
+ parity_scan(ch, myflipbuf, myflipflagbuf, &len);
+ else
+ memset(myflipflagbuf, TTY_NORMAL, len);
if ((nd->nd_dpa_debug) &&
(nd->nd_dpa_port == PORT_NUM(MINOR(tty_devnum(tty)))))
dgrp_dpa_data(nd, 1, myflipbuf, len);
- /*
- * If we're doing raw reads, jam it right into the
- * line disc bypassing the flip buffers.
- */
- if (dgrp_rawreadok && tty->real_raw)
- ld->ops->receive_buf(tty, myflipbuf, NULL, len);
- else {
- len = tty_buffer_request_room(tty, len);
- tty_insert_flip_string_flags(tty, myflipbuf,
- myflipflagbuf, len);
-
- /* Tell the tty layer its okay to "eat" the data now */
- tty_flip_buffer_push(tty);
- }
+ tty_insert_flip_string_flags(tty, myflipbuf,
+ myflipflagbuf, len);
+ tty_flip_buffer_push(tty);
ch->ch_rxcount += len;
}
- if (ld)
- tty_ldisc_deref(ld);
-
/*
* Wake up any sleepers (maybe dgrp close) that might be waiting
* for a channel flag state change.
@@ -1057,13 +1006,13 @@
spin_unlock_irqrestore(&dgrp_poll_data.poll_lock, lock_flags);
-done:
down(&nd->nd_net_semaphore);
dgrp_monitor_message(nd, "Net Close");
up(&nd->nd_net_semaphore);
+done:
module_put(THIS_MODULE);
file->private_data = NULL;
return 0;
@@ -1671,6 +1620,9 @@
* do the job.
*/
+ /* FIXME: jiffies - ch->ch_waketime can never
+ be < 0. Someone needs to work out what is
+ actually intended here */
if (ch->ch_pun.un_open_count &&
(ch->ch_pun.un_flag &
(UN_EMPTY|UN_TIME|UN_LOW|UN_PWAIT)) != 0) {
@@ -2546,7 +2498,7 @@
/*
* Fabricate and insert a data packet header to
- * preceed the remaining data when it comes in.
+ * preced the remaining data when it comes in.
*/
if (remain < plen) {
@@ -2715,7 +2667,7 @@
}
/*
- * Handle delayed response arrival preceeding
+ * Handle delayed response arrival preceding
* the open response we are waiting for.
*/
@@ -3553,7 +3505,7 @@
/*
* Decrement statistics. These are only for use with
* KME, so don't worry that the operations are done
- * unlocked, and so the results are occassionally wrong.
+ * unlocked, and so the results are occasionally wrong.
*/
nd->nd_read_count -= (nd->nd_read_count +
diff --git a/drivers/staging/dgrp/dgrp_specproc.c b/drivers/staging/dgrp/dgrp_specproc.c
index 24327c3..c214078 100644
--- a/drivers/staging/dgrp/dgrp_specproc.c
+++ b/drivers/staging/dgrp/dgrp_specproc.c
@@ -629,8 +629,6 @@
{
seq_printf(m, "version: %s\n", DIGI_VERSION);
seq_puts(m, "register_with_sysfs: 1\n");
- seq_printf(m, "rawreadok: 0x%08x\t(%d)\n",
- dgrp_rawreadok, dgrp_rawreadok);
seq_printf(m, "pollrate: 0x%08x\t(%d)\n",
dgrp_poll_tick, dgrp_poll_tick);
@@ -754,6 +752,8 @@
return 0;
+ /* FIXME this guy should free the tty driver stored in nd and destroy
+ * all channel ports */
error_out:
kfree(nd);
return ret;
diff --git a/drivers/staging/dgrp/dgrp_sysfs.c b/drivers/staging/dgrp/dgrp_sysfs.c
index e5a3c88..be179ad 100644
--- a/drivers/staging/dgrp/dgrp_sysfs.c
+++ b/drivers/staging/dgrp/dgrp_sysfs.c
@@ -17,7 +17,6 @@
#include "dgrp_common.h"
#include <linux/kernel.h>
-#include <linux/version.h>
#include <linux/module.h>
#include <linux/ctype.h>
#include <linux/string.h>
@@ -55,23 +54,6 @@
dgrp_class_register_with_sysfs_show, NULL);
-static ssize_t dgrp_class_rawreadok_show(struct device *c,
- struct device_attribute *attr,
- char *buf)
-{
- return snprintf(buf, PAGE_SIZE, "%d\n", dgrp_rawreadok);
-}
-static ssize_t dgrp_class_rawreadok_store(struct device *c,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- sscanf(buf, "0x%x\n", &dgrp_rawreadok);
- return count;
-}
-static DEVICE_ATTR(rawreadok, 0600, dgrp_class_rawreadok_show,
- dgrp_class_rawreadok_store);
-
-
static ssize_t dgrp_class_pollrate_show(struct device *c,
struct device_attribute *attr,
char *buf)
@@ -91,7 +73,6 @@
static struct attribute *dgrp_sysfs_global_settings_entries[] = {
&dev_attr_pollrate.attr,
- &dev_attr_rawreadok.attr,
&dev_attr_register_with_sysfs.attr,
NULL
};
@@ -177,7 +158,7 @@
if (!nd)
return 0;
- if (nd->nd_state == NS_READY && nd->nd_ps_desc)
+ if (nd->nd_state == NS_READY)
return snprintf(buf, PAGE_SIZE, "%s\n", nd->nd_ps_desc);
return 0;
}
diff --git a/drivers/staging/dgrp/dgrp_tty.c b/drivers/staging/dgrp/dgrp_tty.c
index e125b03..51d3ed3 100644
--- a/drivers/staging/dgrp/dgrp_tty.c
+++ b/drivers/staging/dgrp/dgrp_tty.c
@@ -432,7 +432,7 @@
/*
* From the POSIX.1 spec (7.1.2.6): "If {_POSIX_VDISABLE}
* is defined for the terminal device file, and the value
- * of one of the changable special control characters (see
+ * of one of the changeable special control characters (see
* 7.1.1.9) is {_POSIX_VDISABLE}, that function shall be
* disabled, that is, no input data shall be recognized as
* the disabled special character."
@@ -2265,9 +2265,7 @@
| ((mlast & DM_RI) ? TIOCM_RNG : 0)
| ((mlast & DM_DSR) ? TIOCM_DSR : 0)
| ((mlast & DM_CTS) ? TIOCM_CTS : 0);
- put_user(mlast, (unsigned int __user *) value);
-
- return 0;
+ return put_user(mlast, (unsigned int __user *) value);
}
/*
@@ -2285,7 +2283,8 @@
if (error == 0)
return -EFAULT;
- get_user(arg, (unsigned int __user *) value);
+ if (get_user(arg, (unsigned int __user *) value))
+ return -EFAULT;
mval |= ((arg & TIOCM_RTS) ? DM_RTS : 0)
| ((arg & TIOCM_DTR) ? DM_DTR : 0);
@@ -2615,21 +2614,6 @@
*/
return 0;
- case TIOCGSOFTCAR:
- rc = access_ok(VERIFY_WRITE, (void __user *) arg,
- sizeof(long));
- if (rc == 0)
- return -EFAULT;
- put_user(C_CLOCAL(tty) ? 1 : 0, (unsigned long __user *) arg);
- return 0;
-
- case TIOCSSOFTCAR:
- get_user(arg, (unsigned long __user *) arg);
- tty->termios.c_cflag =
- ((tty->termios.c_cflag & ~CLOCAL) |
- (arg ? CLOCAL : 0));
- return 0;
-
case TIOCMGET:
rc = access_ok(VERIFY_WRITE, (void __user *) arg,
sizeof(unsigned int));
@@ -2699,7 +2683,7 @@
- looking at the tty_ioctl code, these command all call our
tty_set_termios at the driver's end, when a TCSETA* is sent,
it is expecting the tty to have a termio structure,
- NOT a termios stucture. These two structures differ in size
+ NOT a termios structure. These two structures differ in size
and the tty_ioctl code does a conversion before processing them both.
- we should treat the TCSETAW TCSETAF ioctls the same, and let
the tty_ioctl code do the conversion stuff.
@@ -2851,17 +2835,16 @@
break;
case DIGI_GETCUSTOMBAUD:
- rc = access_ok(VERIFY_WRITE, (void __user *) arg, sizeof(int));
- if (rc == 0)
+ if (put_user(ch->ch_custom_speed, (unsigned int __user *) arg))
return -EFAULT;
- put_user(ch->ch_custom_speed, (unsigned int __user *) arg);
break;
case DIGI_SETCUSTOMBAUD:
{
int new_rate;
- get_user(new_rate, (unsigned int __user *) arg);
+ if (get_user(new_rate, (unsigned int __user *) arg))
+ return -EFAULT;
dgrp_set_custom_speed(ch, new_rate);
break;
@@ -2996,7 +2979,7 @@
}
/*
- * Stop the reciever
+ * Stop the receiver
*/
static void dgrp_tty_input_stop(struct tty_struct *tty)
{
@@ -3119,6 +3102,7 @@
void
dgrp_tty_uninit(struct nd_struct *nd)
{
+ unsigned int i;
char id[3];
ID_TO_CHAR(nd->nd_ID, id);
@@ -3152,6 +3136,8 @@
put_tty_driver(nd->nd_xprint_ttdriver);
nd->nd_ttdriver_flags &= ~XPRINT_TTDRV_REG;
}
+ for (i = 0; i < CHAN_MAX; i++)
+ tty_port_destroy(&nd->nd_chan[i].port);
}
@@ -3335,7 +3321,6 @@
init_waitqueue_head(&(ch->ch_pun.un_open_wait));
init_waitqueue_head(&(ch->ch_pun.un_close_wait));
tty_port_init(&ch->port);
- tty_port_init(&ch->port);
}
return 0;
}
diff --git a/drivers/staging/et131x/README b/drivers/staging/et131x/README
index 8265723..38537d4 100644
--- a/drivers/staging/et131x/README
+++ b/drivers/staging/et131x/README
@@ -8,7 +8,7 @@
driver as they did not build properly at the time.
TODO:
- - Use of kmem_cache seems a bit unusual
+ - some rx packets have CRC/code/frame errors
Please send patches to:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/drivers/staging/et131x/et131x.c b/drivers/staging/et131x/et131x.c
index 413da0d..84bbcd4 100644
--- a/drivers/staging/et131x/et131x.c
+++ b/drivers/staging/et131x/et131x.c
@@ -143,7 +143,6 @@
#define fMP_DEST_BROAD 0x00000002
/* MP_ADAPTER flags */
-#define fMP_ADAPTER_RECV_LOOKASIDE 0x00000004
#define fMP_ADAPTER_INTERRUPT_IN_USE 0x00000008
/* MP_SHARED flags */
@@ -176,22 +175,14 @@
#define PARM_DMA_CACHE_DEF 0
/* RX defines */
-#define USE_FBR0 1
-#define FBR_CHUNKS 32
-#define MAX_DESC_PER_RING_RX 1024
+#define FBR_CHUNKS 32
+#define MAX_DESC_PER_RING_RX 1024
/* number of RFDs - default and min */
-#ifdef USE_FBR0
#define RFD_LOW_WATER_MARK 40
#define NIC_DEFAULT_NUM_RFD 1024
#define NUM_FBRS 2
-#else
-#define RFD_LOW_WATER_MARK 20
-#define NIC_DEFAULT_NUM_RFD 256
-#define NUM_FBRS 1
-#endif
-#define NIC_MIN_NUM_RFD 64
#define NUM_PACKETS_HANDLED 256
#define ALCATEL_MULTICAST_PKT 0x01000000
@@ -291,29 +282,20 @@
*/
struct fbr_lookup {
void *virt[MAX_DESC_PER_RING_RX];
- void *buffer1[MAX_DESC_PER_RING_RX];
- void *buffer2[MAX_DESC_PER_RING_RX];
u32 bus_high[MAX_DESC_PER_RING_RX];
u32 bus_low[MAX_DESC_PER_RING_RX];
void *ring_virtaddr;
dma_addr_t ring_physaddr;
void *mem_virtaddrs[MAX_DESC_PER_RING_RX / FBR_CHUNKS];
dma_addr_t mem_physaddrs[MAX_DESC_PER_RING_RX / FBR_CHUNKS];
- u64 real_physaddr;
- u64 offset;
u32 local_full;
u32 num_entries;
- u32 buffsize;
+ dma_addr_t buffsize;
};
/*
* struct rx_ring is the sructure representing the adaptor's local
* reference(s) to the rings
- *
- ******************************************************************************
- * IMPORTANT NOTE :- fbr_lookup *fbr[NUM_FBRS] uses index 0 to refer to FBR1
- * and index 1 to refer to FRB0
- ******************************************************************************
*/
struct rx_ring {
struct fbr_lookup *fbr[NUM_FBRS];
@@ -332,9 +314,6 @@
u32 num_rfd;
bool unfinished_receives;
-
- /* lookaside lists */
- struct kmem_cache *recv_lookaside;
};
/* TX defines */
@@ -866,28 +845,27 @@
/* Setup the receive dma configuration register for normal operation */
u32 csr = 0x2000; /* FBR1 enable */
- if (adapter->rx_ring.fbr[0]->buffsize == 4096)
+ if (adapter->rx_ring.fbr[1]->buffsize == 4096)
csr |= 0x0800;
- else if (adapter->rx_ring.fbr[0]->buffsize == 8192)
+ else if (adapter->rx_ring.fbr[1]->buffsize == 8192)
csr |= 0x1000;
- else if (adapter->rx_ring.fbr[0]->buffsize == 16384)
+ else if (adapter->rx_ring.fbr[1]->buffsize == 16384)
csr |= 0x1800;
-#ifdef USE_FBR0
+
csr |= 0x0400; /* FBR0 enable */
- if (adapter->rx_ring.fbr[1]->buffsize == 256)
+ if (adapter->rx_ring.fbr[0]->buffsize == 256)
csr |= 0x0100;
- else if (adapter->rx_ring.fbr[1]->buffsize == 512)
+ else if (adapter->rx_ring.fbr[0]->buffsize == 512)
csr |= 0x0200;
- else if (adapter->rx_ring.fbr[1]->buffsize == 1024)
+ else if (adapter->rx_ring.fbr[0]->buffsize == 1024)
csr |= 0x0300;
-#endif
writel(csr, &adapter->regs->rxdma.csr);
csr = readl(&adapter->regs->rxdma.csr);
- if ((csr & 0x00020000) != 0) {
+ if (csr & 0x00020000) {
udelay(5);
csr = readl(&adapter->regs->rxdma.csr);
- if ((csr & 0x00020000) != 0) {
+ if (csr & 0x00020000) {
dev_err(&adapter->pdev->dev,
"RX Dma failed to exit halt state. CSR 0x%08x\n",
csr);
@@ -1758,22 +1736,8 @@
*/
static void et131x_xcvr_init(struct et131x_adapter *adapter)
{
- u16 imr;
- u16 isr;
u16 lcr2;
- et131x_mii_read(adapter, PHY_INTERRUPT_STATUS, &isr);
- et131x_mii_read(adapter, PHY_INTERRUPT_MASK, &imr);
-
- /* Set the link status interrupt only. Bad behavior when link status
- * and auto neg are set, we run into a nested interrupt problem
- */
- imr |= (ET_PHY_INT_MASK_AUTONEGSTAT |
- ET_PHY_INT_MASK_LINKSTAT |
- ET_PHY_INT_MASK_ENABLE);
-
- et131x_mii_write(adapter, PHY_INTERRUPT_MASK, imr);
-
/* Set the LED behavior such that LED 1 indicates speed (off =
* 10Mbits, blink = 100Mbits, on = 1000Mbits) and LED 2 indicates
* link and activity (on for link, blink off for activity).
@@ -1798,7 +1762,7 @@
}
/**
- * et131x_configure_global_regs - configure JAGCore global regs
+ * et131x_configure_global_regs - configure JAGCore global regs
* @adapter: pointer to our adapter structure
*
* Used to configure the global registers on the JAGCore
@@ -1856,29 +1820,22 @@
u32 entry;
u32 psr_num_des;
unsigned long flags;
+ u8 id;
/* Halt RXDMA to perform the reconfigure. */
et131x_rx_dma_disable(adapter);
- /* Load the completion writeback physical address
- *
- * NOTE : dma_alloc_coherent(), used above to alloc DMA regions,
- * ALWAYS returns SAC (32-bit) addresses. If DAC (64-bit) addresses
- * are ever returned, make sure the high part is retrieved here
- * before storing the adjusted address.
- */
- writel((u32) ((u64)rx_local->rx_status_bus >> 32),
- &rx_dma->dma_wb_base_hi);
- writel((u32) rx_local->rx_status_bus, &rx_dma->dma_wb_base_lo);
+ /* Load the completion writeback physical address */
+ writel(upper_32_bits(rx_local->rx_status_bus), &rx_dma->dma_wb_base_hi);
+ writel(lower_32_bits(rx_local->rx_status_bus), &rx_dma->dma_wb_base_lo);
memset(rx_local->rx_status_block, 0, sizeof(struct rx_status_block));
/* Set the address and parameters of the packet status ring into the
* 1310's registers
*/
- writel((u32) ((u64)rx_local->ps_ring_physaddr >> 32),
- &rx_dma->psr_base_hi);
- writel((u32) rx_local->ps_ring_physaddr, &rx_dma->psr_base_lo);
+ writel(upper_32_bits(rx_local->ps_ring_physaddr), &rx_dma->psr_base_hi);
+ writel(lower_32_bits(rx_local->ps_ring_physaddr), &rx_dma->psr_base_lo);
writel(rx_local->psr_num_entries - 1, &rx_dma->psr_num_des);
writel(0, &rx_dma->psr_full_offset);
@@ -1891,57 +1848,57 @@
/* These local variables track the PSR in the adapter structure */
rx_local->local_psr_full = 0;
- /* Now's the best time to initialize FBR1 contents */
- fbr_entry = (struct fbr_desc *) rx_local->fbr[0]->ring_virtaddr;
- for (entry = 0; entry < rx_local->fbr[0]->num_entries; entry++) {
- fbr_entry->addr_hi = rx_local->fbr[0]->bus_high[entry];
- fbr_entry->addr_lo = rx_local->fbr[0]->bus_low[entry];
- fbr_entry->word2 = entry;
- fbr_entry++;
+ for (id = 0; id < NUM_FBRS; id++) {
+ u32 *num_des;
+ u32 *full_offset;
+ u32 *min_des;
+ u32 *base_hi;
+ u32 *base_lo;
+
+ if (id == 0) {
+ num_des = &rx_dma->fbr0_num_des;
+ full_offset = &rx_dma->fbr0_full_offset;
+ min_des = &rx_dma->fbr0_min_des;
+ base_hi = &rx_dma->fbr0_base_hi;
+ base_lo = &rx_dma->fbr0_base_lo;
+ } else {
+ num_des = &rx_dma->fbr1_num_des;
+ full_offset = &rx_dma->fbr1_full_offset;
+ min_des = &rx_dma->fbr1_min_des;
+ base_hi = &rx_dma->fbr1_base_hi;
+ base_lo = &rx_dma->fbr1_base_lo;
+ }
+
+ /* Now's the best time to initialize FBR contents */
+ fbr_entry =
+ (struct fbr_desc *) rx_local->fbr[id]->ring_virtaddr;
+ for (entry = 0;
+ entry < rx_local->fbr[id]->num_entries; entry++) {
+ fbr_entry->addr_hi = rx_local->fbr[id]->bus_high[entry];
+ fbr_entry->addr_lo = rx_local->fbr[id]->bus_low[entry];
+ fbr_entry->word2 = entry;
+ fbr_entry++;
+ }
+
+ /* Set the address and parameters of Free buffer ring 1 and 0
+ * into the 1310's registers
+ */
+ writel(upper_32_bits(rx_local->fbr[id]->ring_physaddr),
+ base_hi);
+ writel(lower_32_bits(rx_local->fbr[id]->ring_physaddr),
+ base_lo);
+ writel(rx_local->fbr[id]->num_entries - 1, num_des);
+ writel(ET_DMA10_WRAP, full_offset);
+
+ /* This variable tracks the free buffer ring 1 full position,
+ * so it has to match the above.
+ */
+ rx_local->fbr[id]->local_full = ET_DMA10_WRAP;
+ writel(((rx_local->fbr[id]->num_entries *
+ LO_MARK_PERCENT_FOR_RX) / 100) - 1,
+ min_des);
}
- /* Set the address and parameters of Free buffer ring 1 (and 0 if
- * required) into the 1310's registers
- */
- writel((u32) (rx_local->fbr[0]->real_physaddr >> 32),
- &rx_dma->fbr1_base_hi);
- writel((u32) rx_local->fbr[0]->real_physaddr, &rx_dma->fbr1_base_lo);
- writel(rx_local->fbr[0]->num_entries - 1, &rx_dma->fbr1_num_des);
- writel(ET_DMA10_WRAP, &rx_dma->fbr1_full_offset);
-
- /* This variable tracks the free buffer ring 1 full position, so it
- * has to match the above.
- */
- rx_local->fbr[0]->local_full = ET_DMA10_WRAP;
- writel(
- ((rx_local->fbr[0]->num_entries * LO_MARK_PERCENT_FOR_RX) / 100) - 1,
- &rx_dma->fbr1_min_des);
-
-#ifdef USE_FBR0
- /* Now's the best time to initialize FBR0 contents */
- fbr_entry = (struct fbr_desc *) rx_local->fbr[1]->ring_virtaddr;
- for (entry = 0; entry < rx_local->fbr[1]->num_entries; entry++) {
- fbr_entry->addr_hi = rx_local->fbr[1]->bus_high[entry];
- fbr_entry->addr_lo = rx_local->fbr[1]->bus_low[entry];
- fbr_entry->word2 = entry;
- fbr_entry++;
- }
-
- writel((u32) (rx_local->fbr[1]->real_physaddr >> 32),
- &rx_dma->fbr0_base_hi);
- writel((u32) rx_local->fbr[1]->real_physaddr, &rx_dma->fbr0_base_lo);
- writel(rx_local->fbr[1]->num_entries - 1, &rx_dma->fbr0_num_des);
- writel(ET_DMA10_WRAP, &rx_dma->fbr0_full_offset);
-
- /* This variable tracks the free buffer ring 0 full position, so it
- * has to match the above.
- */
- rx_local->fbr[1]->local_full = ET_DMA10_WRAP;
- writel(
- ((rx_local->fbr[1]->num_entries * LO_MARK_PERCENT_FOR_RX) / 100) - 1,
- &rx_dma->fbr0_min_des);
-#endif
-
/* Program the number of packets we will receive before generating an
* interrupt.
* For version B silicon, this value gets updated once autoneg is
@@ -1971,18 +1928,19 @@
struct txdma_regs __iomem *txdma = &adapter->regs->txdma;
/* Load the hardware with the start of the transmit descriptor ring. */
- writel((u32) ((u64)adapter->tx_ring.tx_desc_ring_pa >> 32),
+ writel(upper_32_bits(adapter->tx_ring.tx_desc_ring_pa),
&txdma->pr_base_hi);
- writel((u32) adapter->tx_ring.tx_desc_ring_pa,
+ writel(lower_32_bits(adapter->tx_ring.tx_desc_ring_pa),
&txdma->pr_base_lo);
/* Initialise the transmit DMA engine */
writel(NUM_DESC_PER_RING_TX - 1, &txdma->pr_num_des);
/* Load the completion writeback physical address */
- writel((u32)((u64)adapter->tx_ring.tx_status_pa >> 32),
- &txdma->dma_wb_base_hi);
- writel((u32)adapter->tx_ring.tx_status_pa, &txdma->dma_wb_base_lo);
+ writel(upper_32_bits(adapter->tx_ring.tx_status_pa),
+ &txdma->dma_wb_base_hi);
+ writel(lower_32_bits(adapter->tx_ring.tx_status_pa),
+ &txdma->dma_wb_base_lo);
*adapter->tx_ring.tx_status = 0;
@@ -2267,31 +2225,6 @@
}
/**
- * et131x_align_allocated_memory - Align allocated memory on a given boundary
- * @adapter: pointer to our adapter structure
- * @phys_addr: pointer to Physical address
- * @offset: pointer to the offset variable
- * @mask: correct mask
- */
-static void et131x_align_allocated_memory(struct et131x_adapter *adapter,
- u64 *phys_addr, u64 *offset,
- u64 mask)
-{
- u64 new_addr = *phys_addr & ~mask;
-
- *offset = 0;
-
- if (new_addr != *phys_addr) {
- /* Move to next aligned block */
- new_addr += mask + 1;
- /* Return offset for adjusting virt addr */
- *offset = new_addr - *phys_addr;
- /* Return new physical address */
- *phys_addr = new_addr;
- }
-}
-
-/**
* et131x_rx_dma_memory_alloc
* @adapter: pointer to our private adapter structure
*
@@ -2302,19 +2235,19 @@
*/
static int et131x_rx_dma_memory_alloc(struct et131x_adapter *adapter)
{
+ u8 id;
u32 i, j;
u32 bufsize;
- u32 pktstat_ringsize, fbr_chunksize;
+ u32 pktstat_ringsize;
+ u32 fbr_chunksize;
struct rx_ring *rx_ring;
/* Setup some convenience pointers */
rx_ring = &adapter->rx_ring;
/* Alloc memory for the lookup table */
-#ifdef USE_FBR0
- rx_ring->fbr[1] = kmalloc(sizeof(struct fbr_lookup), GFP_KERNEL);
-#endif
rx_ring->fbr[0] = kmalloc(sizeof(struct fbr_lookup), GFP_KERNEL);
+ rx_ring->fbr[1] = kmalloc(sizeof(struct fbr_lookup), GFP_KERNEL);
/* The first thing we will do is configure the sizes of the buffer
* rings. These will change based on jumbo packet support. Larger
@@ -2335,211 +2268,85 @@
*/
if (adapter->registry_jumbo_packet < 2048) {
-#ifdef USE_FBR0
- rx_ring->fbr[1]->buffsize = 256;
+ rx_ring->fbr[0]->buffsize = 256;
+ rx_ring->fbr[0]->num_entries = 512;
+ rx_ring->fbr[1]->buffsize = 2048;
rx_ring->fbr[1]->num_entries = 512;
-#endif
- rx_ring->fbr[0]->buffsize = 2048;
- rx_ring->fbr[0]->num_entries = 512;
} else if (adapter->registry_jumbo_packet < 4096) {
-#ifdef USE_FBR0
- rx_ring->fbr[1]->buffsize = 512;
- rx_ring->fbr[1]->num_entries = 1024;
-#endif
- rx_ring->fbr[0]->buffsize = 4096;
- rx_ring->fbr[0]->num_entries = 512;
+ rx_ring->fbr[0]->buffsize = 512;
+ rx_ring->fbr[0]->num_entries = 1024;
+ rx_ring->fbr[1]->buffsize = 4096;
+ rx_ring->fbr[1]->num_entries = 512;
} else {
-#ifdef USE_FBR0
- rx_ring->fbr[1]->buffsize = 1024;
- rx_ring->fbr[1]->num_entries = 768;
-#endif
- rx_ring->fbr[0]->buffsize = 16384;
- rx_ring->fbr[0]->num_entries = 128;
+ rx_ring->fbr[0]->buffsize = 1024;
+ rx_ring->fbr[0]->num_entries = 768;
+ rx_ring->fbr[1]->buffsize = 16384;
+ rx_ring->fbr[1]->num_entries = 128;
}
-#ifdef USE_FBR0
adapter->rx_ring.psr_num_entries =
- adapter->rx_ring.fbr[1]->num_entries +
- adapter->rx_ring.fbr[0]->num_entries;
-#else
- adapter->rx_ring.psr_num_entries = adapter->rx_ring.fbr[0]->num_entries;
-#endif
+ adapter->rx_ring.fbr[0]->num_entries +
+ adapter->rx_ring.fbr[1]->num_entries;
- /* Allocate an area of memory for Free Buffer Ring 1 */
- bufsize = (sizeof(struct fbr_desc) * rx_ring->fbr[0]->num_entries) +
- 0xfff;
- rx_ring->fbr[0]->ring_virtaddr = dma_alloc_coherent(&adapter->pdev->dev,
+ for (id = 0; id < NUM_FBRS; id++) {
+ /* Allocate an area of memory for Free Buffer Ring */
+ bufsize =
+ (sizeof(struct fbr_desc) * rx_ring->fbr[id]->num_entries);
+ rx_ring->fbr[id]->ring_virtaddr =
+ dma_alloc_coherent(&adapter->pdev->dev,
bufsize,
- &rx_ring->fbr[0]->ring_physaddr,
+ &rx_ring->fbr[id]->ring_physaddr,
GFP_KERNEL);
- if (!rx_ring->fbr[0]->ring_virtaddr) {
- dev_err(&adapter->pdev->dev,
- "Cannot alloc memory for Free Buffer Ring 1\n");
- return -ENOMEM;
- }
-
- /* Save physical address
- *
- * NOTE: dma_alloc_coherent(), used above to alloc DMA regions,
- * ALWAYS returns SAC (32-bit) addresses. If DAC (64-bit) addresses
- * are ever returned, make sure the high part is retrieved here
- * before storing the adjusted address.
- */
- rx_ring->fbr[0]->real_physaddr = rx_ring->fbr[0]->ring_physaddr;
-
- /* Align Free Buffer Ring 1 on a 4K boundary */
- et131x_align_allocated_memory(adapter,
- &rx_ring->fbr[0]->real_physaddr,
- &rx_ring->fbr[0]->offset, 0x0FFF);
-
- rx_ring->fbr[0]->ring_virtaddr =
- (void *)((u8 *) rx_ring->fbr[0]->ring_virtaddr +
- rx_ring->fbr[0]->offset);
-
-#ifdef USE_FBR0
- /* Allocate an area of memory for Free Buffer Ring 0 */
- bufsize = (sizeof(struct fbr_desc) * rx_ring->fbr[1]->num_entries) +
- 0xfff;
- rx_ring->fbr[1]->ring_virtaddr = dma_alloc_coherent(&adapter->pdev->dev,
- bufsize,
- &rx_ring->fbr[1]->ring_physaddr,
- GFP_KERNEL);
- if (!rx_ring->fbr[1]->ring_virtaddr) {
- dev_err(&adapter->pdev->dev,
- "Cannot alloc memory for Free Buffer Ring 0\n");
- return -ENOMEM;
- }
-
- /* Save physical address
- *
- * NOTE: dma_alloc_coherent(), used above to alloc DMA regions,
- * ALWAYS returns SAC (32-bit) addresses. If DAC (64-bit) addresses
- * are ever returned, make sure the high part is retrieved here before
- * storing the adjusted address.
- */
- rx_ring->fbr[1]->real_physaddr = rx_ring->fbr[1]->ring_physaddr;
-
- /* Align Free Buffer Ring 0 on a 4K boundary */
- et131x_align_allocated_memory(adapter,
- &rx_ring->fbr[1]->real_physaddr,
- &rx_ring->fbr[1]->offset, 0x0FFF);
-
- rx_ring->fbr[1]->ring_virtaddr =
- (void *)((u8 *) rx_ring->fbr[1]->ring_virtaddr +
- rx_ring->fbr[1]->offset);
-#endif
- for (i = 0; i < (rx_ring->fbr[0]->num_entries / FBR_CHUNKS); i++) {
- u64 fbr1_tmp_physaddr;
- u64 fbr1_offset;
- u32 fbr1_align;
-
- /* This code allocates an area of memory big enough for N
- * free buffers + (buffer_size - 1) so that the buffers can
- * be aligned on 4k boundaries. If each buffer were aligned
- * to a buffer_size boundary, the effect would be to double
- * the size of FBR0. By allocating N buffers at once, we
- * reduce this overhead.
- */
- if (rx_ring->fbr[0]->buffsize > 4096)
- fbr1_align = 4096;
- else
- fbr1_align = rx_ring->fbr[0]->buffsize;
-
- fbr_chunksize =
- (FBR_CHUNKS * rx_ring->fbr[0]->buffsize) + fbr1_align - 1;
- rx_ring->fbr[0]->mem_virtaddrs[i] =
- dma_alloc_coherent(&adapter->pdev->dev, fbr_chunksize,
- &rx_ring->fbr[0]->mem_physaddrs[i],
- GFP_KERNEL);
-
- if (!rx_ring->fbr[0]->mem_virtaddrs[i]) {
+ if (!rx_ring->fbr[id]->ring_virtaddr) {
dev_err(&adapter->pdev->dev,
- "Could not alloc memory\n");
+ "Cannot alloc memory for Free Buffer Ring %d\n", id);
return -ENOMEM;
}
-
- /* See NOTE in "Save Physical Address" comment above */
- fbr1_tmp_physaddr = rx_ring->fbr[0]->mem_physaddrs[i];
-
- et131x_align_allocated_memory(adapter,
- &fbr1_tmp_physaddr,
- &fbr1_offset, (fbr1_align - 1));
-
- for (j = 0; j < FBR_CHUNKS; j++) {
- u32 index = (i * FBR_CHUNKS) + j;
-
- /* Save the Virtual address of this index for quick
- * access later
- */
- rx_ring->fbr[0]->virt[index] =
- (u8 *) rx_ring->fbr[0]->mem_virtaddrs[i] +
- (j * rx_ring->fbr[0]->buffsize) + fbr1_offset;
-
- /* now store the physical address in the descriptor
- * so the device can access it
- */
- rx_ring->fbr[0]->bus_high[index] =
- (u32) (fbr1_tmp_physaddr >> 32);
- rx_ring->fbr[0]->bus_low[index] =
- (u32) fbr1_tmp_physaddr;
-
- fbr1_tmp_physaddr += rx_ring->fbr[0]->buffsize;
-
- rx_ring->fbr[0]->buffer1[index] =
- rx_ring->fbr[0]->virt[index];
- rx_ring->fbr[0]->buffer2[index] =
- rx_ring->fbr[0]->virt[index] - 4;
- }
}
-#ifdef USE_FBR0
- /* Same for FBR0 (if in use) */
- for (i = 0; i < (rx_ring->fbr[1]->num_entries / FBR_CHUNKS); i++) {
- u64 fbr0_tmp_physaddr;
- u64 fbr0_offset;
+ for (id = 0; id < NUM_FBRS; id++) {
+ fbr_chunksize = (FBR_CHUNKS * rx_ring->fbr[id]->buffsize);
- fbr_chunksize =
- ((FBR_CHUNKS + 1) * rx_ring->fbr[1]->buffsize) - 1;
- rx_ring->fbr[1]->mem_virtaddrs[i] =
- dma_alloc_coherent(&adapter->pdev->dev, fbr_chunksize,
- &rx_ring->fbr[1]->mem_physaddrs[i],
- GFP_KERNEL);
+ for (i = 0;
+ i < (rx_ring->fbr[id]->num_entries / FBR_CHUNKS); i++) {
+ dma_addr_t fbr_tmp_physaddr;
- if (!rx_ring->fbr[1]->mem_virtaddrs[i]) {
- dev_err(&adapter->pdev->dev,
- "Could not alloc memory\n");
- return -ENOMEM;
- }
+ rx_ring->fbr[id]->mem_virtaddrs[i] = dma_alloc_coherent(
+ &adapter->pdev->dev, fbr_chunksize,
+ &rx_ring->fbr[id]->mem_physaddrs[i],
+ GFP_KERNEL);
- /* See NOTE in "Save Physical Address" comment above */
- fbr0_tmp_physaddr = rx_ring->fbr[1]->mem_physaddrs[i];
+ if (!rx_ring->fbr[id]->mem_virtaddrs[i]) {
+ dev_err(&adapter->pdev->dev,
+ "Could not alloc memory\n");
+ return -ENOMEM;
+ }
- et131x_align_allocated_memory(adapter,
- &fbr0_tmp_physaddr,
- &fbr0_offset,
- rx_ring->fbr[1]->buffsize - 1);
+ /* See NOTE in "Save Physical Address" comment above */
+ fbr_tmp_physaddr = rx_ring->fbr[id]->mem_physaddrs[i];
- for (j = 0; j < FBR_CHUNKS; j++) {
- u32 index = (i * FBR_CHUNKS) + j;
+ for (j = 0; j < FBR_CHUNKS; j++) {
+ u32 index = (i * FBR_CHUNKS) + j;
- rx_ring->fbr[1]->virt[index] =
- (u8 *) rx_ring->fbr[1]->mem_virtaddrs[i] +
- (j * rx_ring->fbr[1]->buffsize) + fbr0_offset;
+ /* Save the Virtual address of this index for
+ * quick access later
+ */
+ rx_ring->fbr[id]->virt[index] =
+ (u8 *) rx_ring->fbr[id]->mem_virtaddrs[i] +
+ (j * rx_ring->fbr[id]->buffsize);
- rx_ring->fbr[1]->bus_high[index] =
- (u32) (fbr0_tmp_physaddr >> 32);
- rx_ring->fbr[1]->bus_low[index] =
- (u32) fbr0_tmp_physaddr;
+ /* now store the physical address in the
+ * descriptor so the device can access it
+ */
+ rx_ring->fbr[id]->bus_high[index] =
+ upper_32_bits(fbr_tmp_physaddr);
+ rx_ring->fbr[id]->bus_low[index] =
+ lower_32_bits(fbr_tmp_physaddr);
- fbr0_tmp_physaddr += rx_ring->fbr[1]->buffsize;
-
- rx_ring->fbr[1]->buffer1[index] =
- rx_ring->fbr[1]->virt[index];
- rx_ring->fbr[1]->buffer2[index] =
- rx_ring->fbr[1]->virt[index] - 4;
+ fbr_tmp_physaddr += rx_ring->fbr[id]->buffsize;
+ }
}
}
-#endif
/* Allocate an area of memory for FIFO of Packet Status ring entries */
pktstat_ringsize =
@@ -2578,21 +2385,6 @@
rx_ring->num_rfd = NIC_DEFAULT_NUM_RFD;
pr_info("PRS %llx\n", (unsigned long long)rx_ring->rx_status_bus);
- /* Recv
- * kmem_cache_create initializes a lookaside list. After successful
- * creation, nonpaged fixed-size blocks can be allocated from and
- * freed to the lookaside list.
- * RFDs will be allocated from this pool.
- */
- rx_ring->recv_lookaside = kmem_cache_create(adapter->netdev->name,
- sizeof(struct rfd),
- 0,
- SLAB_CACHE_DMA |
- SLAB_HWCACHE_ALIGN,
- NULL);
-
- adapter->flags |= fMP_ADAPTER_RECV_LOOKASIDE;
-
/* The RFDs are going to be put on lists later on, so initialize the
* lists now.
*/
@@ -2606,6 +2398,7 @@
*/
static void et131x_rx_dma_memory_free(struct et131x_adapter *adapter)
{
+ u8 id;
u32 index;
u32 bufsize;
u32 pktstat_ringsize;
@@ -2624,92 +2417,45 @@
list_del(&rfd->list_node);
rfd->skb = NULL;
- kmem_cache_free(adapter->rx_ring.recv_lookaside, rfd);
+ kfree(rfd);
}
- /* Free Free Buffer Ring 1 */
- if (rx_ring->fbr[0]->ring_virtaddr) {
+ /* Free Free Buffer Rings */
+ for (id = 0; id < NUM_FBRS; id++) {
+ if (!rx_ring->fbr[id]->ring_virtaddr)
+ continue;
+
/* First the packet memory */
- for (index = 0; index <
- (rx_ring->fbr[0]->num_entries / FBR_CHUNKS); index++) {
- if (rx_ring->fbr[0]->mem_virtaddrs[index]) {
- u32 fbr1_align;
-
- if (rx_ring->fbr[0]->buffsize > 4096)
- fbr1_align = 4096;
- else
- fbr1_align = rx_ring->fbr[0]->buffsize;
-
+ for (index = 0;
+ index < (rx_ring->fbr[id]->num_entries / FBR_CHUNKS);
+ index++) {
+ if (rx_ring->fbr[id]->mem_virtaddrs[index]) {
bufsize =
- (rx_ring->fbr[0]->buffsize * FBR_CHUNKS) +
- fbr1_align - 1;
+ rx_ring->fbr[id]->buffsize * FBR_CHUNKS;
dma_free_coherent(&adapter->pdev->dev,
bufsize,
- rx_ring->fbr[0]->mem_virtaddrs[index],
- rx_ring->fbr[0]->mem_physaddrs[index]);
+ rx_ring->fbr[id]->mem_virtaddrs[index],
+ rx_ring->fbr[id]->mem_physaddrs[index]);
- rx_ring->fbr[0]->mem_virtaddrs[index] = NULL;
+ rx_ring->fbr[id]->mem_virtaddrs[index] = NULL;
}
}
- /* Now the FIFO itself */
- rx_ring->fbr[0]->ring_virtaddr = (void *)((u8 *)
- rx_ring->fbr[0]->ring_virtaddr - rx_ring->fbr[0]->offset);
-
bufsize =
- (sizeof(struct fbr_desc) * rx_ring->fbr[0]->num_entries) +
- 0xfff;
+ sizeof(struct fbr_desc) * rx_ring->fbr[id]->num_entries;
dma_free_coherent(&adapter->pdev->dev, bufsize,
- rx_ring->fbr[0]->ring_virtaddr,
- rx_ring->fbr[0]->ring_physaddr);
+ rx_ring->fbr[id]->ring_virtaddr,
+ rx_ring->fbr[id]->ring_physaddr);
- rx_ring->fbr[0]->ring_virtaddr = NULL;
+ rx_ring->fbr[id]->ring_virtaddr = NULL;
}
-#ifdef USE_FBR0
- /* Now the same for Free Buffer Ring 0 */
- if (rx_ring->fbr[1]->ring_virtaddr) {
- /* First the packet memory */
- for (index = 0; index <
- (rx_ring->fbr[1]->num_entries / FBR_CHUNKS); index++) {
- if (rx_ring->fbr[1]->mem_virtaddrs[index]) {
- bufsize =
- (rx_ring->fbr[1]->buffsize *
- (FBR_CHUNKS + 1)) - 1;
-
- dma_free_coherent(&adapter->pdev->dev,
- bufsize,
- rx_ring->fbr[1]->mem_virtaddrs[index],
- rx_ring->fbr[1]->mem_physaddrs[index]);
-
- rx_ring->fbr[1]->mem_virtaddrs[index] = NULL;
- }
- }
-
- /* Now the FIFO itself */
- rx_ring->fbr[1]->ring_virtaddr = (void *)((u8 *)
- rx_ring->fbr[1]->ring_virtaddr - rx_ring->fbr[1]->offset);
-
- bufsize =
- (sizeof(struct fbr_desc) * rx_ring->fbr[1]->num_entries) +
- 0xfff;
-
- dma_free_coherent(&adapter->pdev->dev,
- bufsize,
- rx_ring->fbr[1]->ring_virtaddr,
- rx_ring->fbr[1]->ring_physaddr);
-
- rx_ring->fbr[1]->ring_virtaddr = NULL;
- }
-#endif
-
/* Free Packet Status Ring */
if (rx_ring->ps_ring_virtaddr) {
- pktstat_ringsize =
- sizeof(struct pkt_stat_desc) *
- adapter->rx_ring.psr_num_entries;
+ pktstat_ringsize = sizeof(struct pkt_stat_desc) *
+ adapter->rx_ring.psr_num_entries;
dma_free_coherent(&adapter->pdev->dev, pktstat_ringsize,
rx_ring->ps_ring_virtaddr,
@@ -2726,18 +2472,9 @@
rx_ring->rx_status_block = NULL;
}
- /* Destroy the lookaside (RFD) pool */
- if (adapter->flags & fMP_ADAPTER_RECV_LOOKASIDE) {
- kmem_cache_destroy(rx_ring->recv_lookaside);
- adapter->flags &= ~fMP_ADAPTER_RECV_LOOKASIDE;
- }
-
/* Free the FBR Lookup Table */
-#ifdef USE_FBR0
- kfree(rx_ring->fbr[1]);
-#endif
-
kfree(rx_ring->fbr[0]);
+ kfree(rx_ring->fbr[1]);
/* Reset Counters */
rx_ring->num_ready_recv = 0;
@@ -2751,8 +2488,7 @@
*/
static int et131x_init_recv(struct et131x_adapter *adapter)
{
- int status = -ENOMEM;
- struct rfd *rfd = NULL;
+ struct rfd *rfd;
u32 rfdct;
u32 numrfd = 0;
struct rx_ring *rx_ring;
@@ -2762,14 +2498,11 @@
/* Setup each RFD */
for (rfdct = 0; rfdct < rx_ring->num_rfd; rfdct++) {
- rfd = kmem_cache_alloc(rx_ring->recv_lookaside,
- GFP_ATOMIC | GFP_DMA);
+ rfd = kzalloc(sizeof(struct rfd), GFP_ATOMIC | GFP_DMA);
if (!rfd) {
- dev_err(&adapter->pdev->dev,
- "Couldn't alloc RFD out of kmem_cache\n");
- status = -ENOMEM;
- continue;
+ dev_err(&adapter->pdev->dev, "Couldn't alloc RFD\n");
+ return -ENOMEM;
}
rfd->skb = NULL;
@@ -2782,17 +2515,7 @@
numrfd++;
}
- if (numrfd > NIC_MIN_NUM_RFD)
- status = 0;
-
- rx_ring->num_rfd = numrfd;
-
- if (status != 0) {
- kmem_cache_free(rx_ring->recv_lookaside, rfd);
- dev_err(&adapter->pdev->dev,
- "Allocation problems in et131x_init_recv\n");
- }
- return status;
+ return 0;
}
/**
@@ -2831,51 +2554,34 @@
/* We don't use any of the OOB data besides status. Otherwise, we
* need to clean up OOB data
*/
- if (
-#ifdef USE_FBR0
- (ring_index == 0 && buff_index < rx_local->fbr[1]->num_entries) ||
-#endif
- (ring_index == 1 && buff_index < rx_local->fbr[0]->num_entries)) {
+ if (buff_index < rx_local->fbr[ring_index]->num_entries) {
+ u32 *offset;
+ struct fbr_desc *next;
+
spin_lock_irqsave(&adapter->fbr_lock, flags);
- if (ring_index == 1) {
- struct fbr_desc *next = (struct fbr_desc *)
- (rx_local->fbr[0]->ring_virtaddr) +
- INDEX10(rx_local->fbr[0]->local_full);
+ if (ring_index == 0)
+ offset = &rx_dma->fbr0_full_offset;
+ else
+ offset = &rx_dma->fbr1_full_offset;
- /* Handle the Free Buffer Ring advancement here. Write
- * the PA / Buffer Index for the returned buffer into
- * the oldest (next to be freed)FBR entry
- */
- next->addr_hi = rx_local->fbr[0]->bus_high[buff_index];
- next->addr_lo = rx_local->fbr[0]->bus_low[buff_index];
- next->word2 = buff_index;
+ next = (struct fbr_desc *)
+ (rx_local->fbr[ring_index]->ring_virtaddr) +
+ INDEX10(rx_local->fbr[ring_index]->local_full);
- writel(bump_free_buff_ring(
- &rx_local->fbr[0]->local_full,
- rx_local->fbr[0]->num_entries - 1),
- &rx_dma->fbr1_full_offset);
- }
-#ifdef USE_FBR0
- else {
- struct fbr_desc *next = (struct fbr_desc *)
- rx_local->fbr[1]->ring_virtaddr +
- INDEX10(rx_local->fbr[1]->local_full);
+ /* Handle the Free Buffer Ring advancement here. Write
+ * the PA / Buffer Index for the returned buffer into
+ * the oldest (next to be freed)FBR entry
+ */
+ next->addr_hi = rx_local->fbr[ring_index]->bus_high[buff_index];
+ next->addr_lo = rx_local->fbr[ring_index]->bus_low[buff_index];
+ next->word2 = buff_index;
- /* Handle the Free Buffer Ring advancement here. Write
- * the PA / Buffer Index for the returned buffer into
- * the oldest (next to be freed) FBR entry
- */
- next->addr_hi = rx_local->fbr[1]->bus_high[buff_index];
- next->addr_lo = rx_local->fbr[1]->bus_low[buff_index];
- next->word2 = buff_index;
+ writel(bump_free_buff_ring(
+ &rx_local->fbr[ring_index]->local_full,
+ rx_local->fbr[ring_index]->num_entries - 1),
+ offset);
- writel(bump_free_buff_ring(
- &rx_local->fbr[1]->local_full,
- rx_local->fbr[1]->num_entries - 1),
- &rx_dma->fbr0_full_offset);
- }
-#endif
spin_unlock_irqrestore(&adapter->fbr_lock, flags);
} else {
dev_err(&adapter->pdev->dev,
@@ -2919,6 +2625,7 @@
u32 len;
u32 word0;
u32 word1;
+ struct sk_buff *skb;
/* RX Status block is written by the DMA engine prior to every
* interrupt. It contains the next to be used entry in the Packet
@@ -2929,16 +2636,14 @@
/* Check the PSR and wrap bits do not match */
if ((word1 & 0x1FFF) == (rx_local->local_psr_full & 0x1FFF))
- /* Looks like this ring is not updated yet */
- return NULL;
+ return NULL; /* Looks like this ring is not updated yet */
/* The packet status ring indicates that data is available. */
psr = (struct pkt_stat_desc *) (rx_local->ps_ring_virtaddr) +
(rx_local->local_psr_full & 0xFFF);
- /* Grab any information that is required once the PSR is
- * advanced, since we can no longer rely on the memory being
- * accurate
+ /* Grab any information that is required once the PSR is advanced,
+ * since we can no longer rely on the memory being accurate
*/
len = psr->word1 & 0xFFFF;
ring_index = (psr->word1 >> 26) & 0x03;
@@ -2955,40 +2660,24 @@
rx_local->local_psr_full ^= 0x1000;
}
- writel(rx_local->local_psr_full,
- &adapter->regs->rxdma.psr_full_offset);
+ writel(rx_local->local_psr_full, &adapter->regs->rxdma.psr_full_offset);
-#ifndef USE_FBR0
- if (ring_index != 1)
- return NULL;
-#endif
-
-#ifdef USE_FBR0
if (ring_index > 1 ||
- (ring_index == 0 &&
- buff_index > rx_local->fbr[1]->num_entries - 1) ||
- (ring_index == 1 &&
- buff_index > rx_local->fbr[0]->num_entries - 1)) {
-#else
- if (ring_index != 1 || buff_index > rx_local->fbr[0]->num_entries - 1) {
-#endif
+ buff_index > rx_local->fbr[ring_index]->num_entries - 1) {
/* Illegal buffer or ring index cannot be used by S/W*/
dev_err(&adapter->pdev->dev,
- "NICRxPkts PSR Entry %d indicates "
- "length of %d and/or bad bi(%d)\n",
- rx_local->local_psr_full & 0xFFF,
- len, buff_index);
+ "NICRxPkts PSR Entry %d indicates length of %d and/or bad bi(%d)\n",
+ rx_local->local_psr_full & 0xFFF, len, buff_index);
return NULL;
}
/* Get and fill the RFD. */
spin_lock_irqsave(&adapter->rcv_lock, flags);
- rfd = NULL;
element = rx_local->recv_list.next;
rfd = (struct rfd *) list_entry(element, struct rfd, list_node);
- if (rfd == NULL) {
+ if (!rfd) {
spin_unlock_irqrestore(&adapter->rcv_lock, flags);
return NULL;
}
@@ -3001,119 +2690,95 @@
rfd->bufferindex = buff_index;
rfd->ringindex = ring_index;
- /* In V1 silicon, there is a bug which screws up filtering of
- * runt packets. Therefore runt packet filtering is disabled
- * in the MAC and the packets are dropped here. They are
- * also counted here.
+ /* In V1 silicon, there is a bug which screws up filtering of runt
+ * packets. Therefore runt packet filtering is disabled in the MAC and
+ * the packets are dropped here. They are also counted here.
*/
if (len < (NIC_MIN_PACKET_SIZE + 4)) {
adapter->stats.rx_other_errs++;
len = 0;
}
- if (len) {
- /* Determine if this is a multicast packet coming in */
- if ((word0 & ALCATEL_MULTICAST_PKT) &&
- !(word0 & ALCATEL_BROADCAST_PKT)) {
- /* Promiscuous mode and Multicast mode are
- * not mutually exclusive as was first
- * thought. I guess Promiscuous is just
- * considered a super-set of the other
- * filters. Generally filter is 0x2b when in
- * promiscuous mode.
- */
- if ((adapter->packet_filter &
- ET131X_PACKET_TYPE_MULTICAST)
- && !(adapter->packet_filter &
- ET131X_PACKET_TYPE_PROMISCUOUS)
- && !(adapter->packet_filter &
+ if (len == 0) {
+ rfd->len = 0;
+ goto out;
+ }
+
+ /* Determine if this is a multicast packet coming in */
+ if ((word0 & ALCATEL_MULTICAST_PKT) &&
+ !(word0 & ALCATEL_BROADCAST_PKT)) {
+ /* Promiscuous mode and Multicast mode are not mutually
+ * exclusive as was first thought. I guess Promiscuous is just
+ * considered a super-set of the other filters. Generally filter
+ * is 0x2b when in promiscuous mode.
+ */
+ if ((adapter->packet_filter & ET131X_PACKET_TYPE_MULTICAST)
+ && !(adapter->packet_filter & ET131X_PACKET_TYPE_PROMISCUOUS)
+ && !(adapter->packet_filter &
ET131X_PACKET_TYPE_ALL_MULTICAST)) {
- /*
- * Note - ring_index for fbr[] array is reversed
- * 1 for FBR0 etc
- */
- buf = rx_local->fbr[(ring_index == 0 ? 1 : 0)]->
- virt[buff_index];
+ buf = rx_local->fbr[ring_index]->virt[buff_index];
- /* Loop through our list to see if the
- * destination address of this packet
- * matches one in our list.
- */
- for (i = 0; i < adapter->multicast_addr_count;
- i++) {
- if (buf[0] ==
- adapter->multicast_list[i][0]
- && buf[1] ==
- adapter->multicast_list[i][1]
- && buf[2] ==
- adapter->multicast_list[i][2]
- && buf[3] ==
- adapter->multicast_list[i][3]
- && buf[4] ==
- adapter->multicast_list[i][4]
- && buf[5] ==
- adapter->multicast_list[i][5]) {
- break;
- }
+ /* Loop through our list to see if the destination
+ * address of this packet matches one in our list.
+ */
+ for (i = 0; i < adapter->multicast_addr_count; i++) {
+ if (buf[0] == adapter->multicast_list[i][0]
+ && buf[1] == adapter->multicast_list[i][1]
+ && buf[2] == adapter->multicast_list[i][2]
+ && buf[3] == adapter->multicast_list[i][3]
+ && buf[4] == adapter->multicast_list[i][4]
+ && buf[5] == adapter->multicast_list[i][5]) {
+ break;
}
-
- /* If our index is equal to the number
- * of Multicast address we have, then
- * this means we did not find this
- * packet's matching address in our
- * list. Set the len to zero,
- * so we free our RFD when we return
- * from this function.
- */
- if (i == adapter->multicast_addr_count)
- len = 0;
}
- if (len > 0)
- adapter->stats.multicast_pkts_rcvd++;
- } else if (word0 & ALCATEL_BROADCAST_PKT)
- adapter->stats.broadcast_pkts_rcvd++;
- else
- /* Not sure what this counter measures in
- * promiscuous mode. Perhaps we should check
- * the MAC address to see if it is directed
- * to us in promiscuous mode.
+ /* If our index is equal to the number of Multicast
+ * address we have, then this means we did not find this
+ * packet's matching address in our list. Set the len to
+ * zero, so we free our RFD when we return from this
+ * function.
*/
- adapter->stats.unicast_pkts_rcvd++;
- }
-
- if (len > 0) {
- struct sk_buff *skb = NULL;
-
- /*rfd->len = len - 4; */
- rfd->len = len;
-
- skb = dev_alloc_skb(rfd->len + 2);
- if (!skb) {
- dev_err(&adapter->pdev->dev,
- "Couldn't alloc an SKB for Rx\n");
- return NULL;
+ if (i == adapter->multicast_addr_count)
+ len = 0;
}
- adapter->net_stats.rx_bytes += rfd->len;
-
- /*
- * Note - ring_index for fbr[] array is reversed,
- * 1 for FBR0 etc
- */
- memcpy(skb_put(skb, rfd->len),
- rx_local->fbr[(ring_index == 0 ? 1 : 0)]->virt[buff_index],
- rfd->len);
-
- skb->dev = adapter->netdev;
- skb->protocol = eth_type_trans(skb, adapter->netdev);
- skb->ip_summed = CHECKSUM_NONE;
-
- netif_rx_ni(skb);
+ if (len > 0)
+ adapter->stats.multicast_pkts_rcvd++;
+ } else if (word0 & ALCATEL_BROADCAST_PKT) {
+ adapter->stats.broadcast_pkts_rcvd++;
} else {
- rfd->len = 0;
+ /* Not sure what this counter measures in promiscuous mode.
+ * Perhaps we should check the MAC address to see if it is
+ * directed to us in promiscuous mode.
+ */
+ adapter->stats.unicast_pkts_rcvd++;
}
+ if (len == 0) {
+ rfd->len = 0;
+ goto out;
+ }
+
+ rfd->len = len;
+
+ skb = dev_alloc_skb(rfd->len + 2);
+ if (!skb) {
+ dev_err(&adapter->pdev->dev, "Couldn't alloc an SKB for Rx\n");
+ return NULL;
+ }
+
+ adapter->net_stats.rx_bytes += rfd->len;
+
+ memcpy(skb_put(skb, rfd->len),
+ rx_local->fbr[ring_index]->virt[buff_index],
+ rfd->len);
+
+ skb->dev = adapter->netdev;
+ skb->protocol = eth_type_trans(skb, adapter->netdev);
+ skb->ip_summed = CHECKSUM_NONE;
+ netif_rx_ni(skb);
+
+out:
nic_return_rfd(adapter, rfd);
return rfd;
}
@@ -3198,10 +2863,7 @@
return -ENOMEM;
}
- /* Allocate enough memory for the Tx descriptor ring, and allocate
- * some extra so that the ring can be aligned on a 4k boundary.
- */
- desc_size = (sizeof(struct tx_desc) * NUM_DESC_PER_RING_TX) + 4096 - 1;
+ desc_size = (sizeof(struct tx_desc) * NUM_DESC_PER_RING_TX);
tx_ring->tx_desc_ring =
(struct tx_desc *) dma_alloc_coherent(&adapter->pdev->dev,
desc_size,
@@ -3245,8 +2907,7 @@
if (adapter->tx_ring.tx_desc_ring) {
/* Free memory relating to Tx rings here */
- desc_size = (sizeof(struct tx_desc) * NUM_DESC_PER_RING_TX)
- + 4096 - 1;
+ desc_size = (sizeof(struct tx_desc) * NUM_DESC_PER_RING_TX);
dma_free_coherent(&adapter->pdev->dev,
desc_size,
adapter->tx_ring.tx_desc_ring,
@@ -3285,6 +2946,7 @@
struct skb_frag_struct *frags = &skb_shinfo(skb)->frags[0];
unsigned long flags;
struct phy_device *phydev = adapter->phydev;
+ dma_addr_t dma_addr;
/* Part of the optimizations of this send routine restrict us to
* sending 24 fragments at a pass. In practice we should never see
@@ -3313,85 +2975,47 @@
* This will work until we determine why the hardware
* doesn't seem to like large fragments.
*/
- if ((skb->len - skb->data_len) <= 1514) {
- desc[frag].addr_hi = 0;
+ if (skb_headlen(skb) <= 1514) {
/* Low 16bits are length, high is vlan and
unused currently so zero */
- desc[frag].len_vlan =
- skb->len - skb->data_len;
-
- /* NOTE: Here, the dma_addr_t returned from
- * dma_map_single() is implicitly cast as a
- * u32. Although dma_addr_t can be
- * 64-bit, the address returned by
- * dma_map_single() is always 32-bit
- * addressable (as defined by the pci/dma
- * subsystem)
- */
- desc[frag++].addr_lo =
- dma_map_single(&adapter->pdev->dev,
- skb->data,
- skb->len -
- skb->data_len,
- DMA_TO_DEVICE);
+ desc[frag].len_vlan = skb_headlen(skb);
+ dma_addr = dma_map_single(&adapter->pdev->dev,
+ skb->data,
+ skb_headlen(skb),
+ DMA_TO_DEVICE);
+ desc[frag].addr_lo = lower_32_bits(dma_addr);
+ desc[frag].addr_hi = upper_32_bits(dma_addr);
+ frag++;
} else {
- desc[frag].addr_hi = 0;
- desc[frag].len_vlan =
- (skb->len - skb->data_len) / 2;
+ desc[frag].len_vlan = skb_headlen(skb) / 2;
+ dma_addr = dma_map_single(&adapter->pdev->dev,
+ skb->data,
+ (skb_headlen(skb) / 2),
+ DMA_TO_DEVICE);
+ desc[frag].addr_lo = lower_32_bits(dma_addr);
+ desc[frag].addr_hi = upper_32_bits(dma_addr);
+ frag++;
- /* NOTE: Here, the dma_addr_t returned from
- * dma_map_single() is implicitly cast as a
- * u32. Although dma_addr_t can be
- * 64-bit, the address returned by
- * dma_map_single() is always 32-bit
- * addressable (as defined by the pci/dma
- * subsystem)
- */
- desc[frag++].addr_lo =
- dma_map_single(&adapter->pdev->dev,
- skb->data,
- ((skb->len -
- skb->data_len) / 2),
- DMA_TO_DEVICE);
- desc[frag].addr_hi = 0;
-
- desc[frag].len_vlan =
- (skb->len - skb->data_len) / 2;
-
- /* NOTE: Here, the dma_addr_t returned from
- * dma_map_single() is implicitly cast as a
- * u32. Although dma_addr_t can be
- * 64-bit, the address returned by
- * dma_map_single() is always 32-bit
- * addressable (as defined by the pci/dma
- * subsystem)
- */
- desc[frag++].addr_lo =
- dma_map_single(&adapter->pdev->dev,
- skb->data +
- ((skb->len -
- skb->data_len) / 2),
- ((skb->len -
- skb->data_len) / 2),
- DMA_TO_DEVICE);
+ desc[frag].len_vlan = skb_headlen(skb) / 2;
+ dma_addr = dma_map_single(&adapter->pdev->dev,
+ skb->data +
+ (skb_headlen(skb) / 2),
+ (skb_headlen(skb) / 2),
+ DMA_TO_DEVICE);
+ desc[frag].addr_lo = lower_32_bits(dma_addr);
+ desc[frag].addr_hi = upper_32_bits(dma_addr);
+ frag++;
}
} else {
- desc[frag].addr_hi = 0;
- desc[frag].len_vlan =
- frags[i - 1].size;
-
- /* NOTE: Here, the dma_addr_t returned from
- * dma_map_page() is implicitly cast as a u32.
- * Although dma_addr_t can be 64-bit, the address
- * returned by dma_map_page() is always 32-bit
- * addressable (as defined by the pci/dma subsystem)
- */
- desc[frag++].addr_lo = skb_frag_dma_map(
- &adapter->pdev->dev,
- &frags[i - 1],
- 0,
- frags[i - 1].size,
- DMA_TO_DEVICE);
+ desc[frag].len_vlan = frags[i - 1].size;
+ dma_addr = skb_frag_dma_map(&adapter->pdev->dev,
+ &frags[i - 1],
+ 0,
+ frags[i - 1].size,
+ DMA_TO_DEVICE);
+ desc[frag].addr_lo = lower_32_bits(dma_addr);
+ desc[frag].addr_hi = upper_32_bits(dma_addr);
+ frag++;
}
}
@@ -3521,7 +3145,7 @@
tcb->skb = skb;
- if (skb->data != NULL && skb->len - skb->data_len >= 6) {
+ if (skb->data != NULL && skb_headlen(skb) >= 6) {
shbufva = (u16 *) skb->data;
if ((shbufva[0] == 0xffff) &&
@@ -3618,6 +3242,7 @@
unsigned long flags;
struct tx_desc *desc = NULL;
struct net_device_stats *stats = &adapter->net_stats;
+ u64 dma_addr;
if (tcb->flags & fMP_DEST_BROAD)
atomic_inc(&adapter->stats.broadcast_pkts_xmtd);
@@ -3638,8 +3263,11 @@
(adapter->tx_ring.tx_desc_ring +
INDEX10(tcb->index_start));
+ dma_addr = desc->addr_lo;
+ dma_addr |= (u64)desc->addr_hi << 32;
+
dma_unmap_single(&adapter->pdev->dev,
- desc->addr_lo,
+ dma_addr,
desc->len_vlan, DMA_TO_DEVICE);
add_10bit(&tcb->index_start, 1);
@@ -3830,7 +3458,12 @@
et131x_mii_read(adapter, 0x08, (u16 *)®s_buff[num++]);
et131x_mii_read(adapter, MII_CTRL1000, (u16 *)®s_buff[num++]);
et131x_mii_read(adapter, MII_STAT1000, (u16 *)®s_buff[num++]);
+ et131x_mii_read(adapter, 0x0b, (u16 *)®s_buff[num++]);
+ et131x_mii_read(adapter, 0x0c, (u16 *)®s_buff[num++]);
+ et131x_mii_read(adapter, MII_MMD_CTRL, (u16 *)®s_buff[num++]);
+ et131x_mii_read(adapter, MII_MMD_DATA, (u16 *)®s_buff[num++]);
et131x_mii_read(adapter, MII_ESTATUS, (u16 *)®s_buff[num++]);
+
et131x_mii_read(adapter, PHY_INDEX_REG, (u16 *)®s_buff[num++]);
et131x_mii_read(adapter, PHY_DATA_REG, (u16 *)®s_buff[num++]);
et131x_mii_read(adapter, PHY_MPHY_CONTROL_REG,
@@ -3839,6 +3472,7 @@
(u16 *)®s_buff[num++]);
et131x_mii_read(adapter, PHY_LOOPBACK_CONTROL+1,
(u16 *)®s_buff[num++]);
+
et131x_mii_read(adapter, PHY_REGISTER_MGMT_CONTROL,
(u16 *)®s_buff[num++]);
et131x_mii_read(adapter, PHY_CONFIG, (u16 *)®s_buff[num++]);
@@ -3943,7 +3577,7 @@
.get_drvinfo = et131x_get_drvinfo,
.get_regs_len = et131x_get_regs_len,
.get_regs = et131x_get_regs,
- .get_link = ethtool_op_get_link,
+ .get_link = ethtool_op_get_link,
};
/**
* et131x_hwaddr_init - set up the MAC Address on the ET1310
@@ -4110,8 +3744,18 @@
}
/* This is a periodic timer, so reschedule */
- mod_timer(&adapter->error_timer, jiffies +
- TX_ERROR_PERIOD * HZ / 1000);
+ mod_timer(&adapter->error_timer, jiffies + TX_ERROR_PERIOD * HZ / 1000);
+}
+
+/**
+ * et131x_adapter_memory_free - Free all memory allocated for use by Tx & Rx
+ * @adapter: pointer to our private adapter structure
+ */
+static void et131x_adapter_memory_free(struct et131x_adapter *adapter)
+{
+ /* Free DMA memory */
+ et131x_tx_dma_memory_free(adapter);
+ et131x_rx_dma_memory_free(adapter);
}
/**
@@ -4144,26 +3788,14 @@
/* Init receive data structures */
status = et131x_init_recv(adapter);
- if (status != 0) {
+ if (status) {
dev_err(&adapter->pdev->dev,
"et131x_init_recv FAILED\n");
- et131x_tx_dma_memory_free(adapter);
- et131x_rx_dma_memory_free(adapter);
+ et131x_adapter_memory_free(adapter);
}
return status;
}
-/**
- * et131x_adapter_memory_free - Free all memory allocated for use by Tx & Rx
- * @adapter: pointer to our private adapter structure
- */
-static void et131x_adapter_memory_free(struct et131x_adapter *adapter)
-{
- /* Free DMA memory */
- et131x_tx_dma_memory_free(adapter);
- et131x_rx_dma_memory_free(adapter);
-}
-
static void et131x_adjust_link(struct net_device *netdev)
{
struct et131x_adapter *adapter = netdev_priv(netdev);
@@ -4358,7 +3990,7 @@
* PCI subsystem detects that a PCI device which matches the information
* contained in the pci_device_id table has been removed.
*/
-static void __devexit et131x_pci_remove(struct pci_dev *pdev)
+static void et131x_pci_remove(struct pci_dev *pdev)
{
struct net_device *netdev = pci_get_drvdata(pdev);
struct et131x_adapter *adapter = netdev_priv(netdev);
@@ -4558,182 +4190,169 @@
status &= 0xffffffd7;
- if (status) {
- /* Handle the TXDMA Error interrupt */
- if (status & ET_INTR_TXDMA_ERR) {
- u32 txdma_err;
+ if (!status)
+ goto out;
- /* Following read also clears the register (COR) */
- txdma_err = readl(&iomem->txdma.tx_dma_error);
+ /* Handle the TXDMA Error interrupt */
+ if (status & ET_INTR_TXDMA_ERR) {
+ u32 txdma_err;
- dev_warn(&adapter->pdev->dev,
- "TXDMA_ERR interrupt, error = %d\n",
- txdma_err);
- }
+ /* Following read also clears the register (COR) */
+ txdma_err = readl(&iomem->txdma.tx_dma_error);
- /* Handle Free Buffer Ring 0 and 1 Low interrupt */
- if (status &
- (ET_INTR_RXDMA_FB_R0_LOW | ET_INTR_RXDMA_FB_R1_LOW)) {
- /*
- * This indicates the number of unused buffers in
- * RXDMA free buffer ring 0 is <= the limit you
- * programmed. Free buffer resources need to be
- * returned. Free buffers are consumed as packets
- * are passed from the network to the host. The host
- * becomes aware of the packets from the contents of
- * the packet status ring. This ring is queried when
- * the packet done interrupt occurs. Packets are then
- * passed to the OS. When the OS is done with the
- * packets the resources can be returned to the
- * ET1310 for re-use. This interrupt is one method of
- * returning resources.
- */
+ dev_warn(&adapter->pdev->dev,
+ "TXDMA_ERR interrupt, error = %d\n",
+ txdma_err);
+ }
- /* If the user has flow control on, then we will
- * send a pause packet, otherwise just exit
- */
- if (adapter->flowcontrol == FLOW_TXONLY ||
- adapter->flowcontrol == FLOW_BOTH) {
- u32 pm_csr;
+ /* Handle Free Buffer Ring 0 and 1 Low interrupt */
+ if (status & (ET_INTR_RXDMA_FB_R0_LOW | ET_INTR_RXDMA_FB_R1_LOW)) {
+ /*
+ * This indicates the number of unused buffers in RXDMA free
+ * buffer ring 0 is <= the limit you programmed. Free buffer
+ * resources need to be returned. Free buffers are consumed as
+ * packets are passed from the network to the host. The host
+ * becomes aware of the packets from the contents of the packet
+ * status ring. This ring is queried when the packet done
+ * interrupt occurs. Packets are then passed to the OS. When
+ * the OS is done with the packets the resources can be
+ * returned to the ET1310 for re-use. This interrupt is one
+ * method of returning resources.
+ */
- /* Tell the device to send a pause packet via
- * the back pressure register (bp req and
- * bp xon/xoff)
- */
- pm_csr = readl(&iomem->global.pm_csr);
- if (!et1310_in_phy_coma(adapter))
- writel(3, &iomem->txmac.bp_ctrl);
- }
- }
-
- /* Handle Packet Status Ring Low Interrupt */
- if (status & ET_INTR_RXDMA_STAT_LOW) {
+ /*
+ * If the user has flow control on, then we will
+ * send a pause packet, otherwise just exit
+ */
+ if (adapter->flowcontrol == FLOW_TXONLY ||
+ adapter->flowcontrol == FLOW_BOTH) {
+ u32 pm_csr;
/*
- * Same idea as with the two Free Buffer Rings.
- * Packets going from the network to the host each
- * consume a free buffer resource and a packet status
- * resource. These resoures are passed to the OS.
- * When the OS is done with the resources, they need
- * to be returned to the ET1310. This is one method
- * of returning the resources.
+ * Tell the device to send a pause packet via the back
+ * pressure register (bp req and bp xon/xoff)
*/
- }
-
- /* Handle RXDMA Error Interrupt */
- if (status & ET_INTR_RXDMA_ERR) {
- /*
- * The rxdma_error interrupt is sent when a time-out
- * on a request issued by the JAGCore has occurred or
- * a completion is returned with an un-successful
- * status. In both cases the request is considered
- * complete. The JAGCore will automatically re-try the
- * request in question. Normally information on events
- * like these are sent to the host using the "Advanced
- * Error Reporting" capability. This interrupt is
- * another way of getting similar information. The
- * only thing required is to clear the interrupt by
- * reading the ISR in the global resources. The
- * JAGCore will do a re-try on the request. Normally
- * you should never see this interrupt. If you start
- * to see this interrupt occurring frequently then
- * something bad has occurred. A reset might be the
- * thing to do.
- */
- /* TRAP();*/
-
- dev_warn(&adapter->pdev->dev,
- "RxDMA_ERR interrupt, error %x\n",
- readl(&iomem->txmac.tx_test));
- }
-
- /* Handle the Wake on LAN Event */
- if (status & ET_INTR_WOL) {
- /*
- * This is a secondary interrupt for wake on LAN.
- * The driver should never see this, if it does,
- * something serious is wrong. We will TRAP the
- * message when we are in DBG mode, otherwise we
- * will ignore it.
- */
- dev_err(&adapter->pdev->dev, "WAKE_ON_LAN interrupt\n");
- }
-
- /* Let's move on to the TxMac */
- if (status & ET_INTR_TXMAC) {
- u32 err = readl(&iomem->txmac.err);
-
- /*
- * When any of the errors occur and TXMAC generates
- * an interrupt to report these errors, it usually
- * means that TXMAC has detected an error in the data
- * stream retrieved from the on-chip Tx Q. All of
- * these errors are catastrophic and TXMAC won't be
- * able to recover data when these errors occur. In
- * a nutshell, the whole Tx path will have to be reset
- * and re-configured afterwards.
- */
- dev_warn(&adapter->pdev->dev,
- "TXMAC interrupt, error 0x%08x\n",
- err);
-
- /* If we are debugging, we want to see this error,
- * otherwise we just want the device to be reset and
- * continue
- */
- }
-
- /* Handle RXMAC Interrupt */
- if (status & ET_INTR_RXMAC) {
- /*
- * These interrupts are catastrophic to the device,
- * what we need to do is disable the interrupts and
- * set the flag to cause us to reset so we can solve
- * this issue.
- */
- /* MP_SET_FLAG( adapter,
- fMP_ADAPTER_HARDWARE_ERROR); */
-
- dev_warn(&adapter->pdev->dev,
- "RXMAC interrupt, error 0x%08x. Requesting reset\n",
- readl(&iomem->rxmac.err_reg));
-
- dev_warn(&adapter->pdev->dev,
- "Enable 0x%08x, Diag 0x%08x\n",
- readl(&iomem->rxmac.ctrl),
- readl(&iomem->rxmac.rxq_diag));
-
- /*
- * If we are debugging, we want to see this error,
- * otherwise we just want the device to be reset and
- * continue
- */
- }
-
- /* Handle MAC_STAT Interrupt */
- if (status & ET_INTR_MAC_STAT) {
- /*
- * This means at least one of the un-masked counters
- * in the MAC_STAT block has rolled over. Use this
- * to maintain the top, software managed bits of the
- * counter(s).
- */
- et1310_handle_macstat_interrupt(adapter);
- }
-
- /* Handle SLV Timeout Interrupt */
- if (status & ET_INTR_SLV_TIMEOUT) {
- /*
- * This means a timeout has occurred on a read or
- * write request to one of the JAGCore registers. The
- * Global Resources block has terminated the request
- * and on a read request, returned a "fake" value.
- * The most likely reasons are: Bad Address or the
- * addressed module is in a power-down state and
- * can't respond.
- */
+ pm_csr = readl(&iomem->global.pm_csr);
+ if (!et1310_in_phy_coma(adapter))
+ writel(3, &iomem->txmac.bp_ctrl);
}
}
+
+ /* Handle Packet Status Ring Low Interrupt */
+ if (status & ET_INTR_RXDMA_STAT_LOW) {
+ /*
+ * Same idea as with the two Free Buffer Rings. Packets going
+ * from the network to the host each consume a free buffer
+ * resource and a packet status resource. These resoures are
+ * passed to the OS. When the OS is done with the resources,
+ * they need to be returned to the ET1310. This is one method
+ * of returning the resources.
+ */
+ }
+
+ /* Handle RXDMA Error Interrupt */
+ if (status & ET_INTR_RXDMA_ERR) {
+ /*
+ * The rxdma_error interrupt is sent when a time-out on a
+ * request issued by the JAGCore has occurred or a completion is
+ * returned with an un-successful status. In both cases the
+ * request is considered complete. The JAGCore will
+ * automatically re-try the request in question. Normally
+ * information on events like these are sent to the host using
+ * the "Advanced Error Reporting" capability. This interrupt is
+ * another way of getting similar information. The only thing
+ * required is to clear the interrupt by reading the ISR in the
+ * global resources. The JAGCore will do a re-try on the
+ * request. Normally you should never see this interrupt. If
+ * you start to see this interrupt occurring frequently then
+ * something bad has occurred. A reset might be the thing to do.
+ */
+ /* TRAP();*/
+
+ dev_warn(&adapter->pdev->dev,
+ "RxDMA_ERR interrupt, error %x\n",
+ readl(&iomem->txmac.tx_test));
+ }
+
+ /* Handle the Wake on LAN Event */
+ if (status & ET_INTR_WOL) {
+ /*
+ * This is a secondary interrupt for wake on LAN. The driver
+ * should never see this, if it does, something serious is
+ * wrong. We will TRAP the message when we are in DBG mode,
+ * otherwise we will ignore it.
+ */
+ dev_err(&adapter->pdev->dev, "WAKE_ON_LAN interrupt\n");
+ }
+
+ /* Let's move on to the TxMac */
+ if (status & ET_INTR_TXMAC) {
+ u32 err = readl(&iomem->txmac.err);
+
+ /*
+ * When any of the errors occur and TXMAC generates an
+ * interrupt to report these errors, it usually means that
+ * TXMAC has detected an error in the data stream retrieved
+ * from the on-chip Tx Q. All of these errors are catastrophic
+ * and TXMAC won't be able to recover data when these errors
+ * occur. In a nutshell, the whole Tx path will have to be reset
+ * and re-configured afterwards.
+ */
+ dev_warn(&adapter->pdev->dev,
+ "TXMAC interrupt, error 0x%08x\n",
+ err);
+
+ /*
+ * If we are debugging, we want to see this error, otherwise we
+ * just want the device to be reset and continue
+ */
+ }
+
+ /* Handle RXMAC Interrupt */
+ if (status & ET_INTR_RXMAC) {
+ /*
+ * These interrupts are catastrophic to the device, what we need
+ * to do is disable the interrupts and set the flag to cause us
+ * to reset so we can solve this issue.
+ */
+ /* MP_SET_FLAG( adapter, fMP_ADAPTER_HARDWARE_ERROR); */
+
+ dev_warn(&adapter->pdev->dev,
+ "RXMAC interrupt, error 0x%08x. Requesting reset\n",
+ readl(&iomem->rxmac.err_reg));
+
+ dev_warn(&adapter->pdev->dev,
+ "Enable 0x%08x, Diag 0x%08x\n",
+ readl(&iomem->rxmac.ctrl),
+ readl(&iomem->rxmac.rxq_diag));
+
+ /*
+ * If we are debugging, we want to see this error, otherwise we
+ * just want the device to be reset and continue
+ */
+ }
+
+ /* Handle MAC_STAT Interrupt */
+ if (status & ET_INTR_MAC_STAT) {
+ /*
+ * This means at least one of the un-masked counters in the
+ * MAC_STAT block has rolled over. Use this to maintain the top,
+ * software managed bits of the counter(s).
+ */
+ et1310_handle_macstat_interrupt(adapter);
+ }
+
+ /* Handle SLV Timeout Interrupt */
+ if (status & ET_INTR_SLV_TIMEOUT) {
+ /*
+ * This means a timeout has occurred on a read or write request
+ * to one of the JAGCore registers. The Global Resources block
+ * has terminated the request and on a read request, returned a
+ * "fake" value. The most likely reasons are: Bad Address or the
+ * addressed module is in a power-down state and can't respond.
+ */
+ }
+out:
et131x_enable_interrupts(adapter);
}
@@ -5221,7 +4840,7 @@
* contained in the pci_device_id table. This routine is the equivalent to
* a device insertion routine.
*/
-static int __devinit et131x_pci_setup(struct pci_dev *pdev,
+static int et131x_pci_setup(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
struct net_device *netdev;
@@ -5423,7 +5042,7 @@
.name = DRIVER_NAME,
.id_table = et131x_pci_table,
.probe = et131x_pci_setup,
- .remove = __devexit_p(et131x_pci_remove),
+ .remove = et131x_pci_remove,
.driver.pm = ET131X_PM_OPS,
};
diff --git a/drivers/staging/et131x/et131x.h b/drivers/staging/et131x/et131x.h
index 864379b..347e63d 100644
--- a/drivers/staging/et131x/et131x.h
+++ b/drivers/staging/et131x/et131x.h
@@ -1538,10 +1538,6 @@
* 0: int_en
*/
-#define ET_PHY_INT_MASK_AUTONEGSTAT 0x0100
-#define ET_PHY_INT_MASK_LINKSTAT 0x0004
-#define ET_PHY_INT_MASK_ENABLE 0x0001
-
/* MI Register 25: Interrupt Status Reg(0x19)
* 15-10: reserved
* 9: mdio_sync_lost
diff --git a/drivers/staging/ft1000/ft1000-usb/ft1000_proc.c b/drivers/staging/ft1000/ft1000-usb/ft1000_proc.c
index 5ae3967..1edaddb 100644
--- a/drivers/staging/ft1000/ft1000-usb/ft1000_proc.c
+++ b/drivers/staging/ft1000/ft1000-usb/ft1000_proc.c
@@ -205,7 +205,7 @@
{
struct ft1000_info *info;
struct proc_dir_entry *ft1000_proc_file;
- int ret = 0;
+ int ret = -EINVAL;
info = netdev_priv(dev);
@@ -213,7 +213,6 @@
if (info->ft1000_proc_dir == NULL) {
printk(KERN_WARNING "Unable to create %s dir.\n",
FT1000_PROC_DIR);
- ret = -EINVAL;
goto fail;
}
@@ -223,7 +222,6 @@
if (ft1000_proc_file == NULL) {
printk(KERN_WARNING "Unable to create /proc entry.\n");
- ret = -EINVAL;
goto fail_entry;
}
diff --git a/drivers/staging/fwserial/Kconfig b/drivers/staging/fwserial/Kconfig
new file mode 100644
index 0000000..580406c
--- /dev/null
+++ b/drivers/staging/fwserial/Kconfig
@@ -0,0 +1,9 @@
+config FIREWIRE_SERIAL
+ tristate "TTY over Firewire"
+ depends on FIREWIRE
+ help
+ This enables TTY over IEEE 1394, providing high-speed serial
+ connectivity to cabled peers.
+
+ To compile this driver as a module, say M here: the module will
+ be called firewire-serial.
diff --git a/drivers/staging/fwserial/Makefile b/drivers/staging/fwserial/Makefile
new file mode 100644
index 0000000..2170869
--- /dev/null
+++ b/drivers/staging/fwserial/Makefile
@@ -0,0 +1,2 @@
+obj-$(CONFIG_FIREWIRE_SERIAL) += firewire-serial.o
+firewire-serial-objs := fwserial.o dma_fifo.o
diff --git a/drivers/staging/fwserial/TODO b/drivers/staging/fwserial/TODO
new file mode 100644
index 0000000..7269005
--- /dev/null
+++ b/drivers/staging/fwserial/TODO
@@ -0,0 +1,37 @@
+TODOs
+-----
+1. Implement retries for RCODE_BUSY, RCODE_NO_ACK and RCODE_SEND_ERROR
+ - I/O is handled asynchronously which presents some issues when error
+ conditions occur.
+2. Implement _robust_ console on top of this. The existing prototype console
+ driver is not ready for the big leagues yet.
+3. Expose means of controlling attach/detach of peers via sysfs. Include
+ GUID-to-port matching/whitelist/blacklist.
+
+-- Issues with firewire stack --
+1. This driver uses the same unregistered vendor id that the firewire core does
+ (0xd00d1e). Perhaps this could be exposed as a define in
+ firewire-constants.h?
+2. MAX_ASYNC_PAYLOAD needs to be publicly exposed by core/ohci
+ - otherwise how will this driver know the max size of address window to
+ open for one packet write?
+3. Maybe device_max_receive() and link_speed_to_max_payload() should be
+ taken up by the firewire core?
+4. To avoid dropping rx data while still limiting the maximum buffering,
+ the size of the AR context must be known. How to expose this to drivers?
+5. Explore if bigger AR context will reduce RCODE_BUSY responses
+ (or auto-grow to certain max size -- but this would require major surgery
+ as the current AR is contiguously mapped)
+
+-- Issues with TTY core --
+ 1. Hack for alternate device name scheme
+ - because udev no longer allows device renaming, devices should have
+ their proper names on creation. This is an issue for creating the
+ fwloop<n> device with the fwtty<n> devices because although duplicating
+ roughly the same operations as tty_port_register_device() isn't difficult,
+ access to the tty_class & tty_fops is restricted in scope.
+
+ This is currently being worked around in create_loop_device() by
+ extracting the tty_class ptr and tty_fops ptr from the previously created
+ tty devices. Perhaps an add'l api can be added -- eg.,
+ tty_{port_}register_named_device().
diff --git a/drivers/staging/fwserial/dma_fifo.c b/drivers/staging/fwserial/dma_fifo.c
new file mode 100644
index 0000000..5e84634
--- /dev/null
+++ b/drivers/staging/fwserial/dma_fifo.c
@@ -0,0 +1,307 @@
+/*
+ * DMA-able FIFO implementation
+ *
+ * Copyright (C) 2012 Peter Hurley <peter@hurleysoftware.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/list.h>
+#include <linux/bug.h>
+
+#include "dma_fifo.h"
+
+#ifdef DEBUG_TRACING
+#define df_trace(s, args...) pr_debug(s, ##args)
+#else
+#define df_trace(s, args...)
+#endif
+
+#define FAIL(fifo, condition, format...) ({ \
+ fifo->corrupt = !!(condition); \
+ WARN(fifo->corrupt, format); \
+})
+
+/*
+ * private helper fn to determine if check is in open interval (lo,hi)
+ */
+static bool addr_check(unsigned check, unsigned lo, unsigned hi)
+{
+ return check - (lo + 1) < (hi - 1) - lo;
+}
+
+/**
+ * dma_fifo_init: initialize the fifo to a valid but inoperative state
+ * @fifo: address of in-place "struct dma_fifo" object
+ */
+void dma_fifo_init(struct dma_fifo *fifo)
+{
+ memset(fifo, 0, sizeof(*fifo));
+ INIT_LIST_HEAD(&fifo->pending);
+}
+
+/**
+ * dma_fifo_alloc - initialize and allocate dma_fifo
+ * @fifo: address of in-place "struct dma_fifo" object
+ * @size: 'apparent' size, in bytes, of fifo
+ * @align: dma alignment to maintain (should be at least cpu cache alignment),
+ * must be power of 2
+ * @tx_limit: maximum # of bytes transmissable per dma (rounded down to
+ * multiple of alignment, but at least align size)
+ * @open_limit: maximum # of outstanding dma transactions allowed
+ * @gfp_mask: get_free_pages mask, passed to kmalloc()
+ *
+ * The 'apparent' size will be rounded up to next greater aligned size.
+ * Returns 0 if no error, otherwise an error code
+ */
+int dma_fifo_alloc(struct dma_fifo *fifo, int size, unsigned align,
+ int tx_limit, int open_limit, gfp_t gfp_mask)
+{
+ int capacity;
+
+ if (!is_power_of_2(align) || size < 0)
+ return -EINVAL;
+
+ size = round_up(size, align);
+ capacity = size + align * open_limit + align * DMA_FIFO_GUARD;
+ fifo->data = kmalloc(capacity, gfp_mask);
+ if (!fifo->data)
+ return -ENOMEM;
+
+ fifo->in = 0;
+ fifo->out = 0;
+ fifo->done = 0;
+ fifo->size = size;
+ fifo->avail = size;
+ fifo->align = align;
+ fifo->tx_limit = max_t(int, round_down(tx_limit, align), align);
+ fifo->open = 0;
+ fifo->open_limit = open_limit;
+ fifo->guard = size + align * open_limit;
+ fifo->capacity = capacity;
+ fifo->corrupt = 0;
+
+ return 0;
+}
+
+/**
+ * dma_fifo_free - frees the fifo
+ * @fifo: address of in-place "struct dma_fifo" to free
+ *
+ * Also reinits the fifo to a valid but inoperative state. This
+ * allows the fifo to be reused with a different target requiring
+ * different fifo parameters.
+ */
+void dma_fifo_free(struct dma_fifo *fifo)
+{
+ struct dma_pending *pending, *next;
+
+ if (fifo->data == NULL)
+ return;
+
+ list_for_each_entry_safe(pending, next, &fifo->pending, link)
+ list_del_init(&pending->link);
+ kfree(fifo->data);
+ fifo->data = NULL;
+}
+
+/**
+ * dma_fifo_reset - dumps the fifo contents and reinits for reuse
+ * @fifo: address of in-place "struct dma_fifo" to reset
+ */
+void dma_fifo_reset(struct dma_fifo *fifo)
+{
+ struct dma_pending *pending, *next;
+
+ if (fifo->data == NULL)
+ return;
+
+ list_for_each_entry_safe(pending, next, &fifo->pending, link)
+ list_del_init(&pending->link);
+ fifo->in = 0;
+ fifo->out = 0;
+ fifo->done = 0;
+ fifo->avail = fifo->size;
+ fifo->open = 0;
+ fifo->corrupt = 0;
+}
+
+/**
+ * dma_fifo_in - copies data into the fifo
+ * @fifo: address of in-place "struct dma_fifo" to write to
+ * @src: buffer to copy from
+ * @n: # of bytes to copy
+ *
+ * Returns the # of bytes actually copied, which can be less than requested if
+ * the fifo becomes full. If < 0, return is error code.
+ */
+int dma_fifo_in(struct dma_fifo *fifo, const void *src, int n)
+{
+ int ofs, l;
+
+ if (fifo->data == NULL)
+ return -ENOENT;
+ if (fifo->corrupt)
+ return -ENXIO;
+
+ if (n > fifo->avail)
+ n = fifo->avail;
+ if (n <= 0)
+ return 0;
+
+ ofs = fifo->in % fifo->capacity;
+ l = min(n, fifo->capacity - ofs);
+ memcpy(fifo->data + ofs, src, l);
+ memcpy(fifo->data, src + l, n - l);
+
+ if (FAIL(fifo, addr_check(fifo->done, fifo->in, fifo->in + n) ||
+ fifo->avail < n,
+ "fifo corrupt: in:%u out:%u done:%u n:%d avail:%d",
+ fifo->in, fifo->out, fifo->done, n, fifo->avail))
+ return -ENXIO;
+
+ fifo->in += n;
+ fifo->avail -= n;
+
+ df_trace("in:%u out:%u done:%u n:%d avail:%d", fifo->in, fifo->out,
+ fifo->done, n, fifo->avail);
+
+ return n;
+}
+
+/**
+ * dma_fifo_out_pend - gets address/len of next avail read and marks as pended
+ * @fifo: address of in-place "struct dma_fifo" to read from
+ * @pended: address of structure to fill with read address/len
+ * The data/len fields will be NULL/0 if no dma is pended.
+ *
+ * Returns the # of used bytes remaining in fifo (ie, if > 0, more data
+ * remains in the fifo that was not pended). If < 0, return is error code.
+ */
+int dma_fifo_out_pend(struct dma_fifo *fifo, struct dma_pending *pended)
+{
+ unsigned len, n, ofs, l, limit;
+
+ if (fifo->data == NULL)
+ return -ENOENT;
+ if (fifo->corrupt)
+ return -ENXIO;
+
+ pended->len = 0;
+ pended->data = NULL;
+ pended->out = fifo->out;
+
+ len = fifo->in - fifo->out;
+ if (!len)
+ return -ENODATA;
+ if (fifo->open == fifo->open_limit)
+ return -EAGAIN;
+
+ n = len;
+ ofs = fifo->out % fifo->capacity;
+ l = fifo->capacity - ofs;
+ limit = min_t(unsigned, l, fifo->tx_limit);
+ if (n > limit) {
+ n = limit;
+ fifo->out += limit;
+ } else if (ofs + n > fifo->guard) {
+ fifo->out += l;
+ fifo->in = fifo->out;
+ } else {
+ fifo->out += round_up(n, fifo->align);
+ fifo->in = fifo->out;
+ }
+
+ df_trace("in: %u out: %u done: %u n: %d len: %u avail: %d", fifo->in,
+ fifo->out, fifo->done, n, len, fifo->avail);
+
+ pended->len = n;
+ pended->data = fifo->data + ofs;
+ pended->next = fifo->out;
+ list_add_tail(&pended->link, &fifo->pending);
+ ++fifo->open;
+
+ if (FAIL(fifo, fifo->open > fifo->open_limit,
+ "past open limit:%d (limit:%d)",
+ fifo->open, fifo->open_limit))
+ return -ENXIO;
+ if (FAIL(fifo, fifo->out & (fifo->align - 1),
+ "fifo out unaligned:%u (align:%u)",
+ fifo->out, fifo->align))
+ return -ENXIO;
+
+ return len - n;
+}
+
+/**
+ * dma_fifo_out_complete - marks pended dma as completed
+ * @fifo: address of in-place "struct dma_fifo" which was read from
+ * @complete: address of structure for previously pended dma to mark completed
+ */
+int dma_fifo_out_complete(struct dma_fifo *fifo, struct dma_pending *complete)
+{
+ struct dma_pending *pending, *next, *tmp;
+
+ if (fifo->data == NULL)
+ return -ENOENT;
+ if (fifo->corrupt)
+ return -ENXIO;
+ if (list_empty(&fifo->pending) && fifo->open == 0)
+ return -EINVAL;
+
+ if (FAIL(fifo, list_empty(&fifo->pending) != (fifo->open == 0),
+ "pending list disagrees with open count:%d",
+ fifo->open))
+ return -ENXIO;
+
+ tmp = complete->data;
+ *tmp = *complete;
+ list_replace(&complete->link, &tmp->link);
+ dp_mark_completed(tmp);
+
+ /* Only update the fifo in the original pended order */
+ list_for_each_entry_safe(pending, next, &fifo->pending, link) {
+ if (!dp_is_completed(pending)) {
+ df_trace("still pending: saved out: %u len: %d",
+ pending->out, pending->len);
+ break;
+ }
+
+ if (FAIL(fifo, pending->out != fifo->done ||
+ addr_check(fifo->in, fifo->done, pending->next),
+ "in:%u out:%u done:%u saved:%u next:%u",
+ fifo->in, fifo->out, fifo->done, pending->out,
+ pending->next))
+ return -ENXIO;
+
+ list_del_init(&pending->link);
+ fifo->done = pending->next;
+ fifo->avail += pending->len;
+ --fifo->open;
+
+ df_trace("in: %u out: %u done: %u len: %u avail: %d", fifo->in,
+ fifo->out, fifo->done, pending->len, fifo->avail);
+ }
+
+ if (FAIL(fifo, fifo->open < 0, "open dma:%d < 0", fifo->open))
+ return -ENXIO;
+ if (FAIL(fifo, fifo->avail > fifo->size, "fifo avail:%d > size:%d",
+ fifo->avail, fifo->size))
+ return -ENXIO;
+
+ return 0;
+}
diff --git a/drivers/staging/fwserial/dma_fifo.h b/drivers/staging/fwserial/dma_fifo.h
new file mode 100644
index 0000000..a113fe1
--- /dev/null
+++ b/drivers/staging/fwserial/dma_fifo.h
@@ -0,0 +1,130 @@
+/*
+ * DMA-able FIFO interface
+ *
+ * Copyright (C) 2012 Peter Hurley <peter@hurleysoftware.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef _DMA_FIFO_H_
+#define _DMA_FIFO_H_
+
+/**
+ * The design basis for the DMA FIFO is to provide an output side that
+ * complies with the streaming DMA API design that can be DMA'd from directly
+ * (without additional copying), coupled with an input side that maintains a
+ * logically consistent 'apparent' size (ie, bytes in + bytes avail is static
+ * for the lifetime of the FIFO).
+ *
+ * DMA output transactions originate on a cache line boundary and can be
+ * variably-sized. DMA output transactions can be retired out-of-order but
+ * the FIFO will only advance the output in the original input sequence.
+ * This means the FIFO will eventually stall if a transaction is never retired.
+ *
+ * Chunking the output side into cache line multiples means that some FIFO
+ * memory is unused. For example, if all the avail input has been pended out,
+ * then the in and out markers are re-aligned to the next cache line.
+ * The maximum possible waste is
+ * (cache line alignment - 1) * (max outstanding dma transactions)
+ * This potential waste requires additional hidden capacity within the FIFO
+ * to be able to accept input while the 'apparent' size has not been reached.
+ *
+ * Additional cache lines (ie, guard area) are used to minimize DMA
+ * fragmentation when wrapping at the end of the FIFO. Input is allowed into the
+ * guard area, but the in and out FIFO markers are wrapped when DMA is pended.
+ */
+
+#define DMA_FIFO_GUARD 3 /* # of cache lines to reserve for the guard area */
+
+struct dma_fifo {
+ unsigned in;
+ unsigned out; /* updated when dma is pended */
+ unsigned done; /* updated upon dma completion */
+ struct {
+ unsigned corrupt:1;
+ };
+ int size; /* 'apparent' size of fifo */
+ int guard; /* ofs of guard area */
+ int capacity; /* size + reserved */
+ int avail; /* # of unused bytes in fifo */
+ unsigned align; /* must be power of 2 */
+ int tx_limit; /* max # of bytes per dma transaction */
+ int open_limit; /* max # of outstanding allowed */
+ int open; /* # of outstanding dma transactions */
+ struct list_head pending; /* fifo markers for outstanding dma */
+ void *data;
+};
+
+struct dma_pending {
+ struct list_head link;
+ void *data;
+ unsigned len;
+ unsigned next;
+ unsigned out;
+};
+
+static inline void dp_mark_completed(struct dma_pending *dp)
+{
+ dp->data += 1;
+}
+
+static inline bool dp_is_completed(struct dma_pending *dp)
+{
+ return (unsigned long)dp->data & 1UL;
+}
+
+extern void dma_fifo_init(struct dma_fifo *fifo);
+extern int dma_fifo_alloc(struct dma_fifo *fifo, int size, unsigned align,
+ int tx_limit, int open_limit, gfp_t gfp_mask);
+extern void dma_fifo_free(struct dma_fifo *fifo);
+extern void dma_fifo_reset(struct dma_fifo *fifo);
+extern int dma_fifo_in(struct dma_fifo *fifo, const void *src, int n);
+extern int dma_fifo_out_pend(struct dma_fifo *fifo, struct dma_pending *pended);
+extern int dma_fifo_out_complete(struct dma_fifo *fifo,
+ struct dma_pending *complete);
+
+/* returns the # of used bytes in the fifo */
+static inline int dma_fifo_level(struct dma_fifo *fifo)
+{
+ return fifo->size - fifo->avail;
+}
+
+/* returns the # of bytes ready for output in the fifo */
+static inline int dma_fifo_out_level(struct dma_fifo *fifo)
+{
+ return fifo->in - fifo->out;
+}
+
+/* returns the # of unused bytes in the fifo */
+static inline int dma_fifo_avail(struct dma_fifo *fifo)
+{
+ return fifo->avail;
+}
+
+/* returns true if fifo has max # of outstanding dmas */
+static inline bool dma_fifo_busy(struct dma_fifo *fifo)
+{
+ return fifo->open == fifo->open_limit;
+}
+
+/* changes the max size of dma returned from dma_fifo_out_pend() */
+static inline int dma_fifo_change_tx_limit(struct dma_fifo *fifo, int tx_limit)
+{
+ tx_limit = round_down(tx_limit, fifo->align);
+ fifo->tx_limit = max_t(int, tx_limit, fifo->align);
+ return 0;
+}
+
+#endif /* _DMA_FIFO_H_ */
diff --git a/drivers/staging/fwserial/fwserial.c b/drivers/staging/fwserial/fwserial.c
new file mode 100644
index 0000000..61ee290
--- /dev/null
+++ b/drivers/staging/fwserial/fwserial.c
@@ -0,0 +1,2943 @@
+/*
+ * FireWire Serial driver
+ *
+ * Copyright (C) 2012 Peter Hurley <peter@hurleysoftware.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/device.h>
+#include <linux/mod_devicetable.h>
+#include <linux/rculist.h>
+#include <linux/workqueue.h>
+#include <linux/ratelimit.h>
+#include <linux/bug.h>
+#include <linux/uaccess.h>
+
+#include "fwserial.h"
+
+#define be32_to_u64(hi, lo) ((u64)be32_to_cpu(hi) << 32 | be32_to_cpu(lo))
+
+#define LINUX_VENDOR_ID 0xd00d1eU /* same id used in card root directory */
+#define FWSERIAL_VERSION 0x00e81cU /* must be unique within LINUX_VENDOR_ID */
+
+/* configurable options */
+static int num_ttys = 4; /* # of std ttys to create per fw_card */
+ /* - doubles as loopback port index */
+static bool auto_connect = true; /* try to VIRT_CABLE to every peer */
+static bool create_loop_dev = true; /* create a loopback device for each card */
+bool limit_bw; /* limit async bandwidth to 20% of max */
+
+module_param_named(ttys, num_ttys, int, S_IRUGO | S_IWUSR);
+module_param_named(auto, auto_connect, bool, S_IRUGO | S_IWUSR);
+module_param_named(loop, create_loop_dev, bool, S_IRUGO | S_IWUSR);
+module_param(limit_bw, bool, S_IRUGO | S_IWUSR);
+
+/*
+ * Threshold below which the tty is woken for writing
+ * - should be equal to WAKEUP_CHARS in drivers/tty/n_tty.c because
+ * even if the writer is woken, n_tty_poll() won't set POLLOUT until
+ * our fifo is below this level
+ */
+#define WAKEUP_CHARS 256
+
+/**
+ * fwserial_list: list of every fw_serial created for each fw_card
+ * See discussion in fwserial_probe.
+ */
+static LIST_HEAD(fwserial_list);
+static DEFINE_MUTEX(fwserial_list_mutex);
+
+/**
+ * port_table: array of tty ports allocated to each fw_card
+ *
+ * tty ports are allocated during probe when an fw_serial is first
+ * created for a given fw_card. Ports are allocated in a contiguous block,
+ * each block consisting of 'num_ports' ports.
+ */
+static struct fwtty_port *port_table[MAX_TOTAL_PORTS];
+static DEFINE_MUTEX(port_table_lock);
+static bool port_table_corrupt;
+#define FWTTY_INVALID_INDEX MAX_TOTAL_PORTS
+
+/* total # of tty ports created per fw_card */
+static int num_ports;
+
+/* slab used as pool for struct fwtty_transactions */
+static struct kmem_cache *fwtty_txn_cache;
+
+struct fwtty_transaction;
+typedef void (*fwtty_transaction_cb)(struct fw_card *card, int rcode,
+ void *data, size_t length,
+ struct fwtty_transaction *txn);
+
+struct fwtty_transaction {
+ struct fw_transaction fw_txn;
+ fwtty_transaction_cb callback;
+ struct fwtty_port *port;
+ union {
+ struct dma_pending dma_pended;
+ };
+};
+
+#define to_device(a, b) (a->b)
+#define fwtty_err(p, s, v...) dev_err(to_device(p, device), s, ##v)
+#define fwtty_info(p, s, v...) dev_info(to_device(p, device), s, ##v)
+#define fwtty_notice(p, s, v...) dev_notice(to_device(p, device), s, ##v)
+#define fwtty_dbg(p, s, v...) \
+ dev_dbg(to_device(p, device), "%s: " s, __func__, ##v)
+#define fwtty_err_ratelimited(p, s, v...) \
+ dev_err_ratelimited(to_device(p, device), s, ##v)
+
+#ifdef DEBUG
+static inline void debug_short_write(struct fwtty_port *port, int c, int n)
+{
+ int avail;
+
+ if (n < c) {
+ spin_lock_bh(&port->lock);
+ avail = dma_fifo_avail(&port->tx_fifo);
+ spin_unlock_bh(&port->lock);
+ fwtty_dbg(port, "short write: avail:%d req:%d wrote:%d",
+ avail, c, n);
+ }
+}
+#else
+#define debug_short_write(port, c, n)
+#endif
+
+static struct fwtty_peer *__fwserial_peer_by_node_id(struct fw_card *card,
+ int generation, int id);
+
+#ifdef FWTTY_PROFILING
+
+static void profile_fifo_avail(struct fwtty_port *port, unsigned *stat)
+{
+ spin_lock_bh(&port->lock);
+ profile_size_distrib(stat, dma_fifo_avail(&port->tx_fifo));
+ spin_unlock_bh(&port->lock);
+}
+
+static void dump_profile(struct seq_file *m, struct stats *stats)
+{
+ /* for each stat, print sum of 0 to 2^k, then individually */
+ int k = 4;
+ unsigned sum;
+ int j;
+ char t[10];
+
+ snprintf(t, 10, "< %d", 1 << k);
+ seq_printf(m, "\n%14s %6s", " ", t);
+ for (j = k + 1; j < DISTRIBUTION_MAX_INDEX; ++j)
+ seq_printf(m, "%6d", 1 << j);
+
+ ++k;
+ for (j = 0, sum = 0; j <= k; ++j)
+ sum += stats->reads[j];
+ seq_printf(m, "\n%14s: %6d", "reads", sum);
+ for (j = k + 1; j <= DISTRIBUTION_MAX_INDEX; ++j)
+ seq_printf(m, "%6d", stats->reads[j]);
+
+ for (j = 0, sum = 0; j <= k; ++j)
+ sum += stats->writes[j];
+ seq_printf(m, "\n%14s: %6d", "writes", sum);
+ for (j = k + 1; j <= DISTRIBUTION_MAX_INDEX; ++j)
+ seq_printf(m, "%6d", stats->writes[j]);
+
+ for (j = 0, sum = 0; j <= k; ++j)
+ sum += stats->txns[j];
+ seq_printf(m, "\n%14s: %6d", "txns", sum);
+ for (j = k + 1; j <= DISTRIBUTION_MAX_INDEX; ++j)
+ seq_printf(m, "%6d", stats->txns[j]);
+
+ for (j = 0, sum = 0; j <= k; ++j)
+ sum += stats->unthrottle[j];
+ seq_printf(m, "\n%14s: %6d", "avail @ unthr", sum);
+ for (j = k + 1; j <= DISTRIBUTION_MAX_INDEX; ++j)
+ seq_printf(m, "%6d", stats->unthrottle[j]);
+}
+
+#else
+#define profile_fifo_avail(port, stat)
+#define dump_profile(m, stats)
+#endif
+
+/* Returns the max receive packet size for the given card */
+static inline int device_max_receive(struct fw_device *fw_device)
+{
+ return 1 << (clamp_t(int, fw_device->max_rec, 8U, 13U) + 1);
+}
+
+static void fwtty_log_tx_error(struct fwtty_port *port, int rcode)
+{
+ switch (rcode) {
+ case RCODE_SEND_ERROR:
+ fwtty_err_ratelimited(port, "card busy");
+ break;
+ case RCODE_ADDRESS_ERROR:
+ fwtty_err_ratelimited(port, "bad unit addr or write length");
+ break;
+ case RCODE_DATA_ERROR:
+ fwtty_err_ratelimited(port, "failed rx");
+ break;
+ case RCODE_NO_ACK:
+ fwtty_err_ratelimited(port, "missing ack");
+ break;
+ case RCODE_BUSY:
+ fwtty_err_ratelimited(port, "remote busy");
+ break;
+ default:
+ fwtty_err_ratelimited(port, "failed tx: %d", rcode);
+ }
+}
+
+static void fwtty_txn_constructor(void *this)
+{
+ struct fwtty_transaction *txn = this;
+
+ init_timer(&txn->fw_txn.split_timeout_timer);
+}
+
+static void fwtty_common_callback(struct fw_card *card, int rcode,
+ void *payload, size_t len, void *cb_data)
+{
+ struct fwtty_transaction *txn = cb_data;
+ struct fwtty_port *port = txn->port;
+
+ if (port && rcode != RCODE_COMPLETE)
+ fwtty_log_tx_error(port, rcode);
+ if (txn->callback)
+ txn->callback(card, rcode, payload, len, txn);
+ kmem_cache_free(fwtty_txn_cache, txn);
+}
+
+static int fwtty_send_data_async(struct fwtty_peer *peer, int tcode,
+ unsigned long long addr, void *payload,
+ size_t len, fwtty_transaction_cb callback,
+ struct fwtty_port *port)
+{
+ struct fwtty_transaction *txn;
+ int generation;
+
+ txn = kmem_cache_alloc(fwtty_txn_cache, GFP_ATOMIC);
+ if (!txn)
+ return -ENOMEM;
+
+ txn->callback = callback;
+ txn->port = port;
+
+ generation = peer->generation;
+ smp_rmb();
+ fw_send_request(peer->serial->card, &txn->fw_txn, tcode,
+ peer->node_id, generation, peer->speed, addr, payload,
+ len, fwtty_common_callback, txn);
+ return 0;
+}
+
+static void fwtty_send_txn_async(struct fwtty_peer *peer,
+ struct fwtty_transaction *txn, int tcode,
+ unsigned long long addr, void *payload,
+ size_t len, fwtty_transaction_cb callback,
+ struct fwtty_port *port)
+{
+ int generation;
+
+ txn->callback = callback;
+ txn->port = port;
+
+ generation = peer->generation;
+ smp_rmb();
+ fw_send_request(peer->serial->card, &txn->fw_txn, tcode,
+ peer->node_id, generation, peer->speed, addr, payload,
+ len, fwtty_common_callback, txn);
+}
+
+
+static void __fwtty_restart_tx(struct fwtty_port *port)
+{
+ int len, avail;
+
+ len = dma_fifo_out_level(&port->tx_fifo);
+ if (len)
+ schedule_delayed_work(&port->drain, 0);
+ avail = dma_fifo_avail(&port->tx_fifo);
+
+ fwtty_dbg(port, "fifo len: %d avail: %d", len, avail);
+}
+
+static void fwtty_restart_tx(struct fwtty_port *port)
+{
+ spin_lock_bh(&port->lock);
+ __fwtty_restart_tx(port);
+ spin_unlock_bh(&port->lock);
+}
+
+/**
+ * fwtty_update_port_status - decodes & dispatches line status changes
+ *
+ * Note: in loopback, the port->lock is being held. Only use functions that
+ * don't attempt to reclaim the port->lock.
+ */
+static void fwtty_update_port_status(struct fwtty_port *port, unsigned status)
+{
+ unsigned delta;
+ struct tty_struct *tty;
+
+ /* simulated LSR/MSR status from remote */
+ status &= ~MCTRL_MASK;
+ delta = (port->mstatus ^ status) & ~MCTRL_MASK;
+ delta &= ~(status & TIOCM_RNG);
+ port->mstatus = status;
+
+ if (delta & TIOCM_RNG)
+ ++port->icount.rng;
+ if (delta & TIOCM_DSR)
+ ++port->icount.dsr;
+ if (delta & TIOCM_CAR)
+ ++port->icount.dcd;
+ if (delta & TIOCM_CTS)
+ ++port->icount.cts;
+
+ fwtty_dbg(port, "status: %x delta: %x", status, delta);
+
+ if (delta & TIOCM_CAR) {
+ tty = tty_port_tty_get(&port->port);
+ if (tty && !C_CLOCAL(tty)) {
+ if (status & TIOCM_CAR)
+ wake_up_interruptible(&port->port.open_wait);
+ else
+ schedule_work(&port->hangup);
+ }
+ tty_kref_put(tty);
+ }
+
+ if (delta & TIOCM_CTS) {
+ tty = tty_port_tty_get(&port->port);
+ if (tty && C_CRTSCTS(tty)) {
+ if (tty->hw_stopped) {
+ if (status & TIOCM_CTS) {
+ tty->hw_stopped = 0;
+ if (port->loopback)
+ __fwtty_restart_tx(port);
+ else
+ fwtty_restart_tx(port);
+ }
+ } else {
+ if (~status & TIOCM_CTS)
+ tty->hw_stopped = 1;
+ }
+ }
+ tty_kref_put(tty);
+
+ } else if (delta & OOB_TX_THROTTLE) {
+ tty = tty_port_tty_get(&port->port);
+ if (tty) {
+ if (tty->hw_stopped) {
+ if (~status & OOB_TX_THROTTLE) {
+ tty->hw_stopped = 0;
+ if (port->loopback)
+ __fwtty_restart_tx(port);
+ else
+ fwtty_restart_tx(port);
+ }
+ } else {
+ if (status & OOB_TX_THROTTLE)
+ tty->hw_stopped = 1;
+ }
+ }
+ tty_kref_put(tty);
+ }
+
+ if (delta & (UART_LSR_BI << 24)) {
+ if (status & (UART_LSR_BI << 24)) {
+ port->break_last = jiffies;
+ schedule_delayed_work(&port->emit_breaks, 0);
+ } else {
+ /* run emit_breaks one last time (if pending) */
+ mod_delayed_work(system_wq, &port->emit_breaks, 0);
+ }
+ }
+
+ if (delta & (TIOCM_DSR | TIOCM_CAR | TIOCM_CTS | TIOCM_RNG))
+ wake_up_interruptible(&port->port.delta_msr_wait);
+}
+
+/**
+ * __fwtty_port_line_status - generate 'line status' for indicated port
+ *
+ * This function returns a remote 'MSR' state based on the local 'MCR' state,
+ * as if a null modem cable was attached. The actual status is a mangling
+ * of TIOCM_* bits suitable for sending to a peer's status_addr.
+ *
+ * Note: caller must be holding port lock
+ */
+static unsigned __fwtty_port_line_status(struct fwtty_port *port)
+{
+ unsigned status = 0;
+
+ /* TODO: add module param to tie RNG to DTR as well */
+
+ if (port->mctrl & TIOCM_DTR)
+ status |= TIOCM_DSR | TIOCM_CAR;
+ if (port->mctrl & TIOCM_RTS)
+ status |= TIOCM_CTS;
+ if (port->mctrl & OOB_RX_THROTTLE)
+ status |= OOB_TX_THROTTLE;
+ /* emulate BRK as add'l line status */
+ if (port->break_ctl)
+ status |= UART_LSR_BI << 24;
+
+ return status;
+}
+
+/**
+ * __fwtty_write_port_status - send the port line status to peer
+ *
+ * Note: caller must be holding the port lock.
+ */
+static int __fwtty_write_port_status(struct fwtty_port *port)
+{
+ struct fwtty_peer *peer;
+ int err = -ENOENT;
+ unsigned status = __fwtty_port_line_status(port);
+
+ rcu_read_lock();
+ peer = rcu_dereference(port->peer);
+ if (peer) {
+ err = fwtty_send_data_async(peer, TCODE_WRITE_QUADLET_REQUEST,
+ peer->status_addr, &status,
+ sizeof(status), NULL, port);
+ }
+ rcu_read_unlock();
+
+ return err;
+}
+
+/**
+ * fwtty_write_port_status - same as above but locked by port lock
+ */
+static int fwtty_write_port_status(struct fwtty_port *port)
+{
+ int err;
+
+ spin_lock_bh(&port->lock);
+ err = __fwtty_write_port_status(port);
+ spin_unlock_bh(&port->lock);
+ return err;
+}
+
+static void __fwtty_throttle(struct fwtty_port *port, struct tty_struct *tty)
+{
+ unsigned old;
+
+ old = port->mctrl;
+ port->mctrl |= OOB_RX_THROTTLE;
+ if (C_CRTSCTS(tty))
+ port->mctrl &= ~TIOCM_RTS;
+ if (~old & OOB_RX_THROTTLE)
+ __fwtty_write_port_status(port);
+}
+
+/**
+ * fwtty_do_hangup - wait for ldisc to deliver all pending rx; only then hangup
+ *
+ * When the remote has finished tx, and all in-flight rx has been received and
+ * and pushed to the flip buffer, the remote may close its device. This will
+ * drop DTR on the remote which will drop carrier here. Typically, the tty is
+ * hung up when carrier is dropped or lost.
+ *
+ * However, there is a race between the hang up and the line discipline
+ * delivering its data to the reader. A hangup will cause the ldisc to flush
+ * (ie., clear) the read buffer and flip buffer. Because of firewire's
+ * relatively high throughput, the ldisc frequently lags well behind the driver,
+ * resulting in lost data (which has already been received and written to
+ * the flip buffer) when the remote closes its end.
+ *
+ * Unfortunately, since the flip buffer offers no direct method for determining
+ * if it holds data, ensuring the ldisc has delivered all data is problematic.
+ */
+
+/* FIXME: drop this workaround when __tty_hangup waits for ldisc completion */
+static void fwtty_do_hangup(struct work_struct *work)
+{
+ struct fwtty_port *port = to_port(work, hangup);
+ struct tty_struct *tty;
+
+ schedule_timeout_uninterruptible(msecs_to_jiffies(50));
+
+ tty = tty_port_tty_get(&port->port);
+ if (tty)
+ tty_vhangup(tty);
+ tty_kref_put(tty);
+}
+
+
+static void fwtty_emit_breaks(struct work_struct *work)
+{
+ struct fwtty_port *port = to_port(to_delayed_work(work), emit_breaks);
+ struct tty_struct *tty;
+ static const char buf[16];
+ unsigned long now = jiffies;
+ unsigned long elapsed = now - port->break_last;
+ int n, t, c, brk = 0;
+
+ tty = tty_port_tty_get(&port->port);
+ if (!tty)
+ return;
+
+ /* generate breaks at the line rate (but at least 1) */
+ n = (elapsed * port->cps) / HZ + 1;
+ port->break_last = now;
+
+ fwtty_dbg(port, "sending %d brks", n);
+
+ while (n) {
+ t = min(n, 16);
+ c = tty_insert_flip_string_fixed_flag(tty, buf, TTY_BREAK, t);
+ n -= c;
+ brk += c;
+ if (c < t)
+ break;
+ }
+ tty_flip_buffer_push(tty);
+
+ tty_kref_put(tty);
+
+ if (port->mstatus & (UART_LSR_BI << 24))
+ schedule_delayed_work(&port->emit_breaks, FREQ_BREAKS);
+ port->icount.brk += brk;
+}
+
+static void fwtty_pushrx(struct work_struct *work)
+{
+ struct fwtty_port *port = to_port(work, push);
+ struct tty_struct *tty;
+ struct buffered_rx *buf, *next;
+ int n, c = 0;
+
+ tty = tty_port_tty_get(&port->port);
+ if (!tty)
+ return;
+
+ spin_lock_bh(&port->lock);
+ list_for_each_entry_safe(buf, next, &port->buf_list, list) {
+ n = tty_insert_flip_string_fixed_flag(tty, buf->data,
+ TTY_NORMAL, buf->n);
+ c += n;
+ port->buffered -= n;
+ if (n < buf->n) {
+ if (n > 0) {
+ memmove(buf->data, buf->data + n, buf->n - n);
+ buf->n -= n;
+ }
+ __fwtty_throttle(port, tty);
+ break;
+ } else {
+ list_del(&buf->list);
+ kfree(buf);
+ }
+ }
+ if (c > 0)
+ tty_flip_buffer_push(tty);
+
+ if (list_empty(&port->buf_list))
+ clear_bit(BUFFERING_RX, &port->flags);
+ spin_unlock_bh(&port->lock);
+
+ tty_kref_put(tty);
+}
+
+static int fwtty_buffer_rx(struct fwtty_port *port, unsigned char *d, size_t n)
+{
+ struct buffered_rx *buf;
+ size_t size = (n + sizeof(struct buffered_rx) + 0xFF) & ~0xFF;
+
+ if (port->buffered + n > HIGH_WATERMARK)
+ return 0;
+ buf = kmalloc(size, GFP_ATOMIC);
+ if (!buf)
+ return 0;
+ INIT_LIST_HEAD(&buf->list);
+ buf->n = n;
+ memcpy(buf->data, d, n);
+
+ spin_lock_bh(&port->lock);
+ list_add_tail(&buf->list, &port->buf_list);
+ port->buffered += n;
+ if (port->buffered > port->stats.watermark)
+ port->stats.watermark = port->buffered;
+ set_bit(BUFFERING_RX, &port->flags);
+ spin_unlock_bh(&port->lock);
+
+ return n;
+}
+
+static int fwtty_rx(struct fwtty_port *port, unsigned char *data, size_t len)
+{
+ struct tty_struct *tty;
+ int c, n = len;
+ unsigned lsr;
+ int err = 0;
+
+ tty = tty_port_tty_get(&port->port);
+ if (!tty)
+ return -ENOENT;
+
+ fwtty_dbg(port, "%d", n);
+ profile_size_distrib(port->stats.reads, n);
+
+ if (port->write_only) {
+ n = 0;
+ goto out;
+ }
+
+ /* disregard break status; breaks are generated by emit_breaks work */
+ lsr = (port->mstatus >> 24) & ~UART_LSR_BI;
+
+ if (port->overrun)
+ lsr |= UART_LSR_OE;
+
+ if (lsr & UART_LSR_OE)
+ ++port->icount.overrun;
+
+ lsr &= port->status_mask;
+ if (lsr & ~port->ignore_mask & UART_LSR_OE) {
+ if (!tty_insert_flip_char(tty, 0, TTY_OVERRUN)) {
+ err = -EIO;
+ goto out;
+ }
+ }
+ port->overrun = false;
+
+ if (lsr & port->ignore_mask & ~UART_LSR_OE) {
+ /* TODO: don't drop SAK and Magic SysRq here */
+ n = 0;
+ goto out;
+ }
+
+ if (!test_bit(BUFFERING_RX, &port->flags)) {
+ c = tty_insert_flip_string_fixed_flag(tty, data, TTY_NORMAL, n);
+ if (c > 0)
+ tty_flip_buffer_push(tty);
+ n -= c;
+
+ if (n) {
+ /* start buffering and throttling */
+ n -= fwtty_buffer_rx(port, &data[c], n);
+
+ spin_lock_bh(&port->lock);
+ __fwtty_throttle(port, tty);
+ spin_unlock_bh(&port->lock);
+ }
+ } else
+ n -= fwtty_buffer_rx(port, data, n);
+
+ if (n) {
+ port->overrun = true;
+ err = -EIO;
+ }
+
+out:
+ tty_kref_put(tty);
+
+ port->icount.rx += len;
+ port->stats.lost += n;
+ return err;
+}
+
+/**
+ * fwtty_port_handler - bus address handler for port reads/writes
+ * @parameters: fw_address_callback_t as specified by firewire core interface
+ *
+ * This handler is responsible for handling inbound read/write dma from remotes.
+ */
+static void fwtty_port_handler(struct fw_card *card,
+ struct fw_request *request,
+ int tcode, int destination, int source,
+ int generation,
+ unsigned long long addr,
+ void *data, size_t len,
+ void *callback_data)
+{
+ struct fwtty_port *port = callback_data;
+ struct fwtty_peer *peer;
+ int err;
+ int rcode;
+
+ /* Only accept rx from the peer virtual-cabled to this port */
+ rcu_read_lock();
+ peer = __fwserial_peer_by_node_id(card, generation, source);
+ rcu_read_unlock();
+ if (!peer || peer != rcu_access_pointer(port->peer)) {
+ rcode = RCODE_ADDRESS_ERROR;
+ fwtty_err_ratelimited(port, "ignoring unauthenticated data");
+ goto respond;
+ }
+
+ switch (tcode) {
+ case TCODE_WRITE_QUADLET_REQUEST:
+ if (addr != port->rx_handler.offset || len != 4)
+ rcode = RCODE_ADDRESS_ERROR;
+ else {
+ fwtty_update_port_status(port, *(unsigned *)data);
+ rcode = RCODE_COMPLETE;
+ }
+ break;
+
+ case TCODE_WRITE_BLOCK_REQUEST:
+ if (addr != port->rx_handler.offset + 4 ||
+ len > port->rx_handler.length - 4) {
+ rcode = RCODE_ADDRESS_ERROR;
+ } else {
+ err = fwtty_rx(port, data, len);
+ switch (err) {
+ case 0:
+ rcode = RCODE_COMPLETE;
+ break;
+ case -EIO:
+ rcode = RCODE_DATA_ERROR;
+ break;
+ default:
+ rcode = RCODE_CONFLICT_ERROR;
+ break;
+ }
+ }
+ break;
+
+ default:
+ rcode = RCODE_TYPE_ERROR;
+ }
+
+respond:
+ fw_send_response(card, request, rcode);
+}
+
+/**
+ * fwtty_tx_complete - callback for tx dma
+ * @data: ignored, has no meaning for write txns
+ * @length: ignored, has no meaning for write txns
+ *
+ * The writer must be woken here if the fifo has been emptied because it
+ * may have slept if chars_in_buffer was != 0
+ */
+static void fwtty_tx_complete(struct fw_card *card, int rcode,
+ void *data, size_t length,
+ struct fwtty_transaction *txn)
+{
+ struct fwtty_port *port = txn->port;
+ struct tty_struct *tty;
+ int len;
+
+ fwtty_dbg(port, "rcode: %d", rcode);
+
+ switch (rcode) {
+ case RCODE_COMPLETE:
+ spin_lock_bh(&port->lock);
+ dma_fifo_out_complete(&port->tx_fifo, &txn->dma_pended);
+ len = dma_fifo_level(&port->tx_fifo);
+ spin_unlock_bh(&port->lock);
+
+ port->icount.tx += txn->dma_pended.len;
+ break;
+
+ default:
+ /* TODO: implement retries */
+ spin_lock_bh(&port->lock);
+ dma_fifo_out_complete(&port->tx_fifo, &txn->dma_pended);
+ len = dma_fifo_level(&port->tx_fifo);
+ spin_unlock_bh(&port->lock);
+
+ port->stats.dropped += txn->dma_pended.len;
+ }
+
+ if (len < WAKEUP_CHARS) {
+ tty = tty_port_tty_get(&port->port);
+ if (tty) {
+ tty_wakeup(tty);
+ tty_kref_put(tty);
+ }
+ }
+}
+
+static int fwtty_tx(struct fwtty_port *port, bool drain)
+{
+ struct fwtty_peer *peer;
+ struct fwtty_transaction *txn;
+ struct tty_struct *tty;
+ int n, len;
+
+ tty = tty_port_tty_get(&port->port);
+ if (!tty)
+ return -ENOENT;
+
+ rcu_read_lock();
+ peer = rcu_dereference(port->peer);
+ if (!peer) {
+ n = -EIO;
+ goto out;
+ }
+
+ if (test_and_set_bit(IN_TX, &port->flags)) {
+ n = -EALREADY;
+ goto out;
+ }
+
+ /* try to write as many dma transactions out as possible */
+ n = -EAGAIN;
+ while (!tty->stopped && !tty->hw_stopped &&
+ !test_bit(STOP_TX, &port->flags)) {
+ txn = kmem_cache_alloc(fwtty_txn_cache, GFP_ATOMIC);
+ if (!txn) {
+ n = -ENOMEM;
+ break;
+ }
+
+ spin_lock_bh(&port->lock);
+ n = dma_fifo_out_pend(&port->tx_fifo, &txn->dma_pended);
+ spin_unlock_bh(&port->lock);
+
+ fwtty_dbg(port, "out: %u rem: %d", txn->dma_pended.len, n);
+
+ if (n < 0) {
+ kmem_cache_free(fwtty_txn_cache, txn);
+ if (n == -EAGAIN)
+ ++port->stats.tx_stall;
+ else if (n == -ENODATA)
+ profile_size_distrib(port->stats.txns, 0);
+ else {
+ ++port->stats.fifo_errs;
+ fwtty_err_ratelimited(port, "fifo err: %d", n);
+ }
+ break;
+ }
+
+ profile_size_distrib(port->stats.txns, txn->dma_pended.len);
+
+ fwtty_send_txn_async(peer, txn, TCODE_WRITE_BLOCK_REQUEST,
+ peer->fifo_addr, txn->dma_pended.data,
+ txn->dma_pended.len, fwtty_tx_complete,
+ port);
+ ++port->stats.sent;
+
+ /*
+ * Stop tx if the 'last view' of the fifo is empty or if
+ * this is the writer and there's not enough data to bother
+ */
+ if (n == 0 || (!drain && n < WRITER_MINIMUM))
+ break;
+ }
+
+ if (n >= 0 || n == -EAGAIN || n == -ENOMEM || n == -ENODATA) {
+ spin_lock_bh(&port->lock);
+ len = dma_fifo_out_level(&port->tx_fifo);
+ if (len) {
+ unsigned long delay = (n == -ENOMEM) ? HZ : 1;
+ schedule_delayed_work(&port->drain, delay);
+ }
+ len = dma_fifo_level(&port->tx_fifo);
+ spin_unlock_bh(&port->lock);
+
+ /* wakeup the writer */
+ if (drain && len < WAKEUP_CHARS)
+ tty_wakeup(tty);
+ }
+
+ clear_bit(IN_TX, &port->flags);
+ wake_up_interruptible(&port->wait_tx);
+
+out:
+ rcu_read_unlock();
+ tty_kref_put(tty);
+ return n;
+}
+
+static void fwtty_drain_tx(struct work_struct *work)
+{
+ struct fwtty_port *port = to_port(to_delayed_work(work), drain);
+
+ fwtty_tx(port, true);
+}
+
+static void fwtty_write_xchar(struct fwtty_port *port, char ch)
+{
+ struct fwtty_peer *peer;
+
+ ++port->stats.xchars;
+
+ fwtty_dbg(port, "%02x", ch);
+
+ rcu_read_lock();
+ peer = rcu_dereference(port->peer);
+ if (peer) {
+ fwtty_send_data_async(peer, TCODE_WRITE_BLOCK_REQUEST,
+ peer->fifo_addr, &ch, sizeof(ch),
+ NULL, port);
+ }
+ rcu_read_unlock();
+}
+
+struct fwtty_port *fwtty_port_get(unsigned index)
+{
+ struct fwtty_port *port;
+
+ if (index >= MAX_TOTAL_PORTS)
+ return NULL;
+
+ mutex_lock(&port_table_lock);
+ port = port_table[index];
+ if (port)
+ kref_get(&port->serial->kref);
+ mutex_unlock(&port_table_lock);
+ return port;
+}
+EXPORT_SYMBOL(fwtty_port_get);
+
+static int fwtty_ports_add(struct fw_serial *serial)
+{
+ int err = -EBUSY;
+ int i, j;
+
+ if (port_table_corrupt)
+ return err;
+
+ mutex_lock(&port_table_lock);
+ for (i = 0; i + num_ports <= MAX_TOTAL_PORTS; i += num_ports) {
+ if (!port_table[i]) {
+ for (j = 0; j < num_ports; ++i, ++j) {
+ serial->ports[j]->index = i;
+ port_table[i] = serial->ports[j];
+ }
+ err = 0;
+ break;
+ }
+ }
+ mutex_unlock(&port_table_lock);
+ return err;
+}
+
+static void fwserial_destroy(struct kref *kref)
+{
+ struct fw_serial *serial = to_serial(kref, kref);
+ struct fwtty_port **ports = serial->ports;
+ int j, i = ports[0]->index;
+
+ synchronize_rcu();
+
+ mutex_lock(&port_table_lock);
+ for (j = 0; j < num_ports; ++i, ++j) {
+ port_table_corrupt |= port_table[i] != ports[j];
+ WARN_ONCE(port_table_corrupt, "port_table[%d]: %p != ports[%d]: %p",
+ i, port_table[i], j, ports[j]);
+
+ port_table[i] = NULL;
+ }
+ mutex_unlock(&port_table_lock);
+
+ for (j = 0; j < num_ports; ++j) {
+ fw_core_remove_address_handler(&ports[j]->rx_handler);
+ tty_port_destroy(&ports[j]->port);
+ kfree(ports[j]);
+ }
+ kfree(serial);
+}
+
+void fwtty_port_put(struct fwtty_port *port)
+{
+ kref_put(&port->serial->kref, fwserial_destroy);
+}
+EXPORT_SYMBOL(fwtty_port_put);
+
+static void fwtty_port_dtr_rts(struct tty_port *tty_port, int on)
+{
+ struct fwtty_port *port = to_port(tty_port, port);
+
+ fwtty_dbg(port, "on/off: %d", on);
+
+ spin_lock_bh(&port->lock);
+ /* Don't change carrier state if this is a console */
+ if (!port->port.console) {
+ if (on)
+ port->mctrl |= TIOCM_DTR | TIOCM_RTS;
+ else
+ port->mctrl &= ~(TIOCM_DTR | TIOCM_RTS);
+ }
+
+ __fwtty_write_port_status(port);
+ spin_unlock_bh(&port->lock);
+}
+
+/**
+ * fwtty_port_carrier_raised: required tty_port operation
+ *
+ * This port operation is polled after a tty has been opened and is waiting for
+ * carrier detect -- see drivers/tty/tty_port:tty_port_block_til_ready().
+ */
+static int fwtty_port_carrier_raised(struct tty_port *tty_port)
+{
+ struct fwtty_port *port = to_port(tty_port, port);
+ int rc;
+
+ rc = (port->mstatus & TIOCM_CAR);
+
+ fwtty_dbg(port, "%d", rc);
+
+ return rc;
+}
+
+static unsigned set_termios(struct fwtty_port *port, struct tty_struct *tty)
+{
+ unsigned baud, frame;
+
+ baud = tty_termios_baud_rate(&tty->termios);
+ tty_termios_encode_baud_rate(&tty->termios, baud, baud);
+
+ /* compute bit count of 2 frames */
+ frame = 12 + ((C_CSTOPB(tty)) ? 4 : 2) + ((C_PARENB(tty)) ? 2 : 0);
+
+ switch (C_CSIZE(tty)) {
+ case CS5:
+ frame -= (C_CSTOPB(tty)) ? 1 : 0;
+ break;
+ case CS6:
+ frame += 2;
+ break;
+ case CS7:
+ frame += 4;
+ break;
+ case CS8:
+ frame += 6;
+ break;
+ }
+
+ port->cps = (baud << 1) / frame;
+
+ port->status_mask = UART_LSR_OE;
+ if (_I_FLAG(tty, BRKINT | PARMRK))
+ port->status_mask |= UART_LSR_BI;
+
+ port->ignore_mask = 0;
+ if (I_IGNBRK(tty)) {
+ port->ignore_mask |= UART_LSR_BI;
+ if (I_IGNPAR(tty))
+ port->ignore_mask |= UART_LSR_OE;
+ }
+
+ port->write_only = !C_CREAD(tty);
+
+ /* turn off echo and newline xlat if loopback */
+ if (port->loopback) {
+ tty->termios.c_lflag &= ~(ECHO | ECHOE | ECHOK | ECHOKE |
+ ECHONL | ECHOPRT | ECHOCTL);
+ tty->termios.c_oflag &= ~ONLCR;
+ }
+
+ return baud;
+}
+
+static int fwtty_port_activate(struct tty_port *tty_port,
+ struct tty_struct *tty)
+{
+ struct fwtty_port *port = to_port(tty_port, port);
+ unsigned baud;
+ int err;
+
+ set_bit(TTY_IO_ERROR, &tty->flags);
+
+ err = dma_fifo_alloc(&port->tx_fifo, FWTTY_PORT_TXFIFO_LEN,
+ cache_line_size(),
+ port->max_payload,
+ FWTTY_PORT_MAX_PEND_DMA,
+ GFP_KERNEL);
+ if (err)
+ return err;
+
+ spin_lock_bh(&port->lock);
+
+ baud = set_termios(port, tty);
+
+ /* if console, don't change carrier state */
+ if (!port->port.console) {
+ port->mctrl = 0;
+ if (baud != 0)
+ port->mctrl = TIOCM_DTR | TIOCM_RTS;
+ }
+
+ if (C_CRTSCTS(tty) && ~port->mstatus & TIOCM_CTS)
+ tty->hw_stopped = 1;
+
+ __fwtty_write_port_status(port);
+ spin_unlock_bh(&port->lock);
+
+ clear_bit(TTY_IO_ERROR, &tty->flags);
+
+ return 0;
+}
+
+/**
+ * fwtty_port_shutdown
+ *
+ * Note: the tty port core ensures this is not the console and
+ * manages TTY_IO_ERROR properly
+ */
+static void fwtty_port_shutdown(struct tty_port *tty_port)
+{
+ struct fwtty_port *port = to_port(tty_port, port);
+ struct buffered_rx *buf, *next;
+
+ /* TODO: cancel outstanding transactions */
+
+ cancel_delayed_work_sync(&port->emit_breaks);
+ cancel_delayed_work_sync(&port->drain);
+ cancel_work_sync(&port->push);
+
+ spin_lock_bh(&port->lock);
+ list_for_each_entry_safe(buf, next, &port->buf_list, list) {
+ list_del(&buf->list);
+ kfree(buf);
+ }
+ port->buffered = 0;
+ port->flags = 0;
+ port->break_ctl = 0;
+ port->overrun = 0;
+ __fwtty_write_port_status(port);
+ dma_fifo_free(&port->tx_fifo);
+ spin_unlock_bh(&port->lock);
+}
+
+static int fwtty_open(struct tty_struct *tty, struct file *fp)
+{
+ struct fwtty_port *port = tty->driver_data;
+
+ return tty_port_open(&port->port, tty, fp);
+}
+
+static void fwtty_close(struct tty_struct *tty, struct file *fp)
+{
+ struct fwtty_port *port = tty->driver_data;
+
+ tty_port_close(&port->port, tty, fp);
+}
+
+static void fwtty_hangup(struct tty_struct *tty)
+{
+ struct fwtty_port *port = tty->driver_data;
+
+ tty_port_hangup(&port->port);
+}
+
+static void fwtty_cleanup(struct tty_struct *tty)
+{
+ struct fwtty_port *port = tty->driver_data;
+
+ tty->driver_data = NULL;
+ fwtty_port_put(port);
+}
+
+static int fwtty_install(struct tty_driver *driver, struct tty_struct *tty)
+{
+ struct fwtty_port *port = fwtty_port_get(tty->index);
+ int err;
+
+ err = tty_standard_install(driver, tty);
+ if (!err)
+ tty->driver_data = port;
+ else
+ fwtty_port_put(port);
+ return err;
+}
+
+static int fwtty_write(struct tty_struct *tty, const unsigned char *buf, int c)
+{
+ struct fwtty_port *port = tty->driver_data;
+ int n, len;
+
+ fwtty_dbg(port, "%d", c);
+ profile_size_distrib(port->stats.writes, c);
+
+ spin_lock_bh(&port->lock);
+ n = dma_fifo_in(&port->tx_fifo, buf, c);
+ len = dma_fifo_out_level(&port->tx_fifo);
+ if (len < DRAIN_THRESHOLD)
+ schedule_delayed_work(&port->drain, 1);
+ spin_unlock_bh(&port->lock);
+
+ if (len >= DRAIN_THRESHOLD)
+ fwtty_tx(port, false);
+
+ debug_short_write(port, c, n);
+
+ return (n < 0) ? 0 : n;
+}
+
+static int fwtty_write_room(struct tty_struct *tty)
+{
+ struct fwtty_port *port = tty->driver_data;
+ int n;
+
+ spin_lock_bh(&port->lock);
+ n = dma_fifo_avail(&port->tx_fifo);
+ spin_unlock_bh(&port->lock);
+
+ fwtty_dbg(port, "%d", n);
+
+ return n;
+}
+
+static int fwtty_chars_in_buffer(struct tty_struct *tty)
+{
+ struct fwtty_port *port = tty->driver_data;
+ int n;
+
+ spin_lock_bh(&port->lock);
+ n = dma_fifo_level(&port->tx_fifo);
+ spin_unlock_bh(&port->lock);
+
+ fwtty_dbg(port, "%d", n);
+
+ return n;
+}
+
+static void fwtty_send_xchar(struct tty_struct *tty, char ch)
+{
+ struct fwtty_port *port = tty->driver_data;
+
+ fwtty_dbg(port, "%02x", ch);
+
+ fwtty_write_xchar(port, ch);
+}
+
+static void fwtty_throttle(struct tty_struct *tty)
+{
+ struct fwtty_port *port = tty->driver_data;
+
+ /*
+ * Ignore throttling (but not unthrottling).
+ * It only makes sense to throttle when data will no longer be
+ * accepted by the tty flip buffer. For example, it is
+ * possible for received data to overflow the tty buffer long
+ * before the line discipline ever has a chance to throttle the driver.
+ * Additionally, the driver may have already completed the I/O
+ * but the tty buffer is still emptying, so the line discipline is
+ * throttling and unthrottling nothing.
+ */
+
+ ++port->stats.throttled;
+}
+
+static void fwtty_unthrottle(struct tty_struct *tty)
+{
+ struct fwtty_port *port = tty->driver_data;
+
+ fwtty_dbg(port, "CRTSCTS: %d", (C_CRTSCTS(tty) != 0));
+
+ profile_fifo_avail(port, port->stats.unthrottle);
+
+ schedule_work(&port->push);
+
+ spin_lock_bh(&port->lock);
+ port->mctrl &= ~OOB_RX_THROTTLE;
+ if (C_CRTSCTS(tty))
+ port->mctrl |= TIOCM_RTS;
+ __fwtty_write_port_status(port);
+ spin_unlock_bh(&port->lock);
+}
+
+static int check_msr_delta(struct fwtty_port *port, unsigned long mask,
+ struct async_icount *prev)
+{
+ struct async_icount now;
+ int delta;
+
+ now = port->icount;
+
+ delta = ((mask & TIOCM_RNG && prev->rng != now.rng) ||
+ (mask & TIOCM_DSR && prev->dsr != now.dsr) ||
+ (mask & TIOCM_CAR && prev->dcd != now.dcd) ||
+ (mask & TIOCM_CTS && prev->cts != now.cts));
+
+ *prev = now;
+
+ return delta;
+}
+
+static int wait_msr_change(struct fwtty_port *port, unsigned long mask)
+{
+ struct async_icount prev;
+
+ prev = port->icount;
+
+ return wait_event_interruptible(port->port.delta_msr_wait,
+ check_msr_delta(port, mask, &prev));
+}
+
+static int get_serial_info(struct fwtty_port *port,
+ struct serial_struct __user *info)
+{
+ struct serial_struct tmp;
+
+ memset(&tmp, 0, sizeof(tmp));
+
+ tmp.type = PORT_UNKNOWN;
+ tmp.line = port->port.tty->index;
+ tmp.flags = port->port.flags;
+ tmp.xmit_fifo_size = FWTTY_PORT_TXFIFO_LEN;
+ tmp.baud_base = 400000000;
+ tmp.close_delay = port->port.close_delay;
+
+ return (copy_to_user(info, &tmp, sizeof(*info))) ? -EFAULT : 0;
+}
+
+static int set_serial_info(struct fwtty_port *port,
+ struct serial_struct __user *info)
+{
+ struct serial_struct tmp;
+
+ if (copy_from_user(&tmp, info, sizeof(tmp)))
+ return -EFAULT;
+
+ if (tmp.irq != 0 || tmp.port != 0 || tmp.custom_divisor != 0 ||
+ tmp.baud_base != 400000000)
+ return -EPERM;
+
+ if (!capable(CAP_SYS_ADMIN)) {
+ if (((tmp.flags & ~ASYNC_USR_MASK) !=
+ (port->port.flags & ~ASYNC_USR_MASK)))
+ return -EPERM;
+ } else
+ port->port.close_delay = tmp.close_delay * HZ / 100;
+
+ return 0;
+}
+
+static int fwtty_ioctl(struct tty_struct *tty, unsigned cmd,
+ unsigned long arg)
+{
+ struct fwtty_port *port = tty->driver_data;
+ int err;
+
+ switch (cmd) {
+ case TIOCGSERIAL:
+ mutex_lock(&port->port.mutex);
+ err = get_serial_info(port, (void __user *)arg);
+ mutex_unlock(&port->port.mutex);
+ break;
+
+ case TIOCSSERIAL:
+ mutex_lock(&port->port.mutex);
+ err = set_serial_info(port, (void __user *)arg);
+ mutex_unlock(&port->port.mutex);
+ break;
+
+ case TIOCMIWAIT:
+ err = wait_msr_change(port, arg);
+ break;
+
+ default:
+ err = -ENOIOCTLCMD;
+ }
+
+ return err;
+}
+
+static void fwtty_set_termios(struct tty_struct *tty, struct ktermios *old)
+{
+ struct fwtty_port *port = tty->driver_data;
+ unsigned baud;
+
+ spin_lock_bh(&port->lock);
+ baud = set_termios(port, tty);
+
+ if ((baud == 0) && (old->c_cflag & CBAUD))
+ port->mctrl &= ~(TIOCM_DTR | TIOCM_RTS);
+ else if ((baud != 0) && !(old->c_cflag & CBAUD)) {
+ if (C_CRTSCTS(tty) || !test_bit(TTY_THROTTLED, &tty->flags))
+ port->mctrl |= TIOCM_DTR | TIOCM_RTS;
+ else
+ port->mctrl |= TIOCM_DTR;
+ }
+ __fwtty_write_port_status(port);
+ spin_unlock_bh(&port->lock);
+
+ if (old->c_cflag & CRTSCTS) {
+ if (!C_CRTSCTS(tty)) {
+ tty->hw_stopped = 0;
+ fwtty_restart_tx(port);
+ }
+ } else if (C_CRTSCTS(tty) && ~port->mstatus & TIOCM_CTS) {
+ tty->hw_stopped = 1;
+ }
+}
+
+/**
+ * fwtty_break_ctl - start/stop sending breaks
+ *
+ * Signals the remote to start or stop generating simulated breaks.
+ * First, stop dequeueing from the fifo and wait for writer/drain to leave tx
+ * before signalling the break line status. This guarantees any pending rx will
+ * be queued to the line discipline before break is simulated on the remote.
+ * Conversely, turning off break_ctl requires signalling the line status change,
+ * then enabling tx.
+ */
+static int fwtty_break_ctl(struct tty_struct *tty, int state)
+{
+ struct fwtty_port *port = tty->driver_data;
+ long ret;
+
+ fwtty_dbg(port, "%d", state);
+
+ if (state == -1) {
+ set_bit(STOP_TX, &port->flags);
+ ret = wait_event_interruptible_timeout(port->wait_tx,
+ !test_bit(IN_TX, &port->flags),
+ 10);
+ if (ret == 0 || ret == -ERESTARTSYS) {
+ clear_bit(STOP_TX, &port->flags);
+ fwtty_restart_tx(port);
+ return -EINTR;
+ }
+ }
+
+ spin_lock_bh(&port->lock);
+ port->break_ctl = (state == -1);
+ __fwtty_write_port_status(port);
+ spin_unlock_bh(&port->lock);
+
+ if (state == 0) {
+ spin_lock_bh(&port->lock);
+ dma_fifo_reset(&port->tx_fifo);
+ clear_bit(STOP_TX, &port->flags);
+ spin_unlock_bh(&port->lock);
+ }
+ return 0;
+}
+
+static int fwtty_tiocmget(struct tty_struct *tty)
+{
+ struct fwtty_port *port = tty->driver_data;
+ unsigned tiocm;
+
+ spin_lock_bh(&port->lock);
+ tiocm = (port->mctrl & MCTRL_MASK) | (port->mstatus & ~MCTRL_MASK);
+ spin_unlock_bh(&port->lock);
+
+ fwtty_dbg(port, "%x", tiocm);
+
+ return tiocm;
+}
+
+static int fwtty_tiocmset(struct tty_struct *tty, unsigned set, unsigned clear)
+{
+ struct fwtty_port *port = tty->driver_data;
+
+ fwtty_dbg(port, "set: %x clear: %x", set, clear);
+
+ /* TODO: simulate loopback if TIOCM_LOOP set */
+
+ spin_lock_bh(&port->lock);
+ port->mctrl &= ~(clear & MCTRL_MASK & 0xffff);
+ port->mctrl |= set & MCTRL_MASK & 0xffff;
+ __fwtty_write_port_status(port);
+ spin_unlock_bh(&port->lock);
+ return 0;
+}
+
+static int fwtty_get_icount(struct tty_struct *tty,
+ struct serial_icounter_struct *icount)
+{
+ struct fwtty_port *port = tty->driver_data;
+ struct stats stats;
+
+ memcpy(&stats, &port->stats, sizeof(stats));
+ if (port->port.console)
+ (*port->fwcon_ops->stats)(&stats, port->con_data);
+
+ icount->cts = port->icount.cts;
+ icount->dsr = port->icount.dsr;
+ icount->rng = port->icount.rng;
+ icount->dcd = port->icount.dcd;
+ icount->rx = port->icount.rx;
+ icount->tx = port->icount.tx + stats.xchars;
+ icount->frame = port->icount.frame;
+ icount->overrun = port->icount.overrun;
+ icount->parity = port->icount.parity;
+ icount->brk = port->icount.brk;
+ icount->buf_overrun = port->icount.overrun;
+ return 0;
+}
+
+static void fwtty_proc_show_port(struct seq_file *m, struct fwtty_port *port)
+{
+ struct stats stats;
+
+ memcpy(&stats, &port->stats, sizeof(stats));
+ if (port->port.console)
+ (*port->fwcon_ops->stats)(&stats, port->con_data);
+
+ seq_printf(m, " tx:%d rx:%d", port->icount.tx + stats.xchars,
+ port->icount.rx);
+ seq_printf(m, " cts:%d dsr:%d rng:%d dcd:%d", port->icount.cts,
+ port->icount.dsr, port->icount.rng, port->icount.dcd);
+ seq_printf(m, " fe:%d oe:%d pe:%d brk:%d", port->icount.frame,
+ port->icount.overrun, port->icount.parity, port->icount.brk);
+ seq_printf(m, " dr:%d st:%d err:%d lost:%d", stats.dropped,
+ stats.tx_stall, stats.fifo_errs, stats.lost);
+ seq_printf(m, " pkts:%d thr:%d wtrmk:%d", stats.sent, stats.throttled,
+ stats.watermark);
+ seq_printf(m, " addr:%012llx", port->rx_handler.offset);
+
+ if (port->port.console) {
+ seq_printf(m, "\n ");
+ (*port->fwcon_ops->proc_show)(m, port->con_data);
+ }
+
+ dump_profile(m, &port->stats);
+}
+
+static void fwtty_proc_show_peer(struct seq_file *m, struct fwtty_peer *peer)
+{
+ int generation = peer->generation;
+
+ smp_rmb();
+ seq_printf(m, " %s:", dev_name(&peer->unit->device));
+ seq_printf(m, " node:%04x gen:%d", peer->node_id, generation);
+ seq_printf(m, " sp:%d max:%d guid:%016llx", peer->speed,
+ peer->max_payload, (unsigned long long) peer->guid);
+
+ if (capable(CAP_SYS_ADMIN)) {
+ seq_printf(m, " mgmt:%012llx",
+ (unsigned long long) peer->mgmt_addr);
+ seq_printf(m, " addr:%012llx",
+ (unsigned long long) peer->status_addr);
+ }
+ seq_putc(m, '\n');
+}
+
+static int fwtty_proc_show(struct seq_file *m, void *v)
+{
+ struct fwtty_port *port;
+ struct fw_serial *serial;
+ struct fwtty_peer *peer;
+ int i;
+
+ seq_puts(m, "fwserinfo: 1.0 driver: 1.0\n");
+ for (i = 0; i < MAX_TOTAL_PORTS && (port = fwtty_port_get(i)); ++i) {
+ seq_printf(m, "%2d:", i);
+ if (capable(CAP_SYS_ADMIN))
+ fwtty_proc_show_port(m, port);
+ fwtty_port_put(port);
+ seq_printf(m, "\n");
+ }
+ seq_putc(m, '\n');
+
+ rcu_read_lock();
+ list_for_each_entry_rcu(serial, &fwserial_list, list) {
+ seq_printf(m, "card: %s guid: %016llx\n",
+ dev_name(serial->card->device),
+ (unsigned long long) serial->card->guid);
+ list_for_each_entry_rcu(peer, &serial->peer_list, list)
+ fwtty_proc_show_peer(m, peer);
+ }
+ rcu_read_unlock();
+ return 0;
+}
+
+static int fwtty_proc_open(struct inode *inode, struct file *fp)
+{
+ return single_open(fp, fwtty_proc_show, NULL);
+}
+
+static const struct file_operations fwtty_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = fwtty_proc_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static const struct tty_port_operations fwtty_port_ops = {
+ .dtr_rts = fwtty_port_dtr_rts,
+ .carrier_raised = fwtty_port_carrier_raised,
+ .shutdown = fwtty_port_shutdown,
+ .activate = fwtty_port_activate,
+};
+
+static const struct tty_operations fwtty_ops = {
+ .open = fwtty_open,
+ .close = fwtty_close,
+ .hangup = fwtty_hangup,
+ .cleanup = fwtty_cleanup,
+ .install = fwtty_install,
+ .write = fwtty_write,
+ .write_room = fwtty_write_room,
+ .chars_in_buffer = fwtty_chars_in_buffer,
+ .send_xchar = fwtty_send_xchar,
+ .throttle = fwtty_throttle,
+ .unthrottle = fwtty_unthrottle,
+ .ioctl = fwtty_ioctl,
+ .set_termios = fwtty_set_termios,
+ .break_ctl = fwtty_break_ctl,
+ .tiocmget = fwtty_tiocmget,
+ .tiocmset = fwtty_tiocmset,
+ .get_icount = fwtty_get_icount,
+ .proc_fops = &fwtty_proc_fops,
+};
+
+static inline int mgmt_pkt_expected_len(__be16 code)
+{
+ static const struct fwserial_mgmt_pkt pkt;
+
+ switch (be16_to_cpu(code)) {
+ case FWSC_VIRT_CABLE_PLUG:
+ return sizeof(pkt.hdr) + sizeof(pkt.plug_req);
+
+ case FWSC_VIRT_CABLE_PLUG_RSP: /* | FWSC_RSP_OK */
+ return sizeof(pkt.hdr) + sizeof(pkt.plug_rsp);
+
+
+ case FWSC_VIRT_CABLE_UNPLUG:
+ case FWSC_VIRT_CABLE_UNPLUG_RSP:
+ case FWSC_VIRT_CABLE_PLUG_RSP | FWSC_RSP_NACK:
+ case FWSC_VIRT_CABLE_UNPLUG_RSP | FWSC_RSP_NACK:
+ return sizeof(pkt.hdr);
+
+ default:
+ return -1;
+ }
+}
+
+static inline void fill_plug_params(struct virt_plug_params *params,
+ struct fwtty_port *port)
+{
+ u64 status_addr = port->rx_handler.offset;
+ u64 fifo_addr = port->rx_handler.offset + 4;
+ size_t fifo_len = port->rx_handler.length - 4;
+
+ params->status_hi = cpu_to_be32(status_addr >> 32);
+ params->status_lo = cpu_to_be32(status_addr);
+ params->fifo_hi = cpu_to_be32(fifo_addr >> 32);
+ params->fifo_lo = cpu_to_be32(fifo_addr);
+ params->fifo_len = cpu_to_be32(fifo_len);
+}
+
+static inline void fill_plug_req(struct fwserial_mgmt_pkt *pkt,
+ struct fwtty_port *port)
+{
+ pkt->hdr.code = cpu_to_be16(FWSC_VIRT_CABLE_PLUG);
+ pkt->hdr.len = cpu_to_be16(mgmt_pkt_expected_len(pkt->hdr.code));
+ fill_plug_params(&pkt->plug_req, port);
+}
+
+static inline void fill_plug_rsp_ok(struct fwserial_mgmt_pkt *pkt,
+ struct fwtty_port *port)
+{
+ pkt->hdr.code = cpu_to_be16(FWSC_VIRT_CABLE_PLUG_RSP);
+ pkt->hdr.len = cpu_to_be16(mgmt_pkt_expected_len(pkt->hdr.code));
+ fill_plug_params(&pkt->plug_rsp, port);
+}
+
+static inline void fill_plug_rsp_nack(struct fwserial_mgmt_pkt *pkt)
+{
+ pkt->hdr.code = cpu_to_be16(FWSC_VIRT_CABLE_PLUG_RSP | FWSC_RSP_NACK);
+ pkt->hdr.len = cpu_to_be16(mgmt_pkt_expected_len(pkt->hdr.code));
+}
+
+static inline void fill_unplug_req(struct fwserial_mgmt_pkt *pkt)
+{
+ pkt->hdr.code = cpu_to_be16(FWSC_VIRT_CABLE_UNPLUG);
+ pkt->hdr.len = cpu_to_be16(mgmt_pkt_expected_len(pkt->hdr.code));
+}
+
+static inline void fill_unplug_rsp_nack(struct fwserial_mgmt_pkt *pkt)
+{
+ pkt->hdr.code = cpu_to_be16(FWSC_VIRT_CABLE_UNPLUG_RSP | FWSC_RSP_NACK);
+ pkt->hdr.len = cpu_to_be16(mgmt_pkt_expected_len(pkt->hdr.code));
+}
+
+static inline void fill_unplug_rsp_ok(struct fwserial_mgmt_pkt *pkt)
+{
+ pkt->hdr.code = cpu_to_be16(FWSC_VIRT_CABLE_UNPLUG_RSP);
+ pkt->hdr.len = cpu_to_be16(mgmt_pkt_expected_len(pkt->hdr.code));
+}
+
+static void fwserial_virt_plug_complete(struct fwtty_peer *peer,
+ struct virt_plug_params *params)
+{
+ struct fwtty_port *port = peer->port;
+
+ peer->status_addr = be32_to_u64(params->status_hi, params->status_lo);
+ peer->fifo_addr = be32_to_u64(params->fifo_hi, params->fifo_lo);
+ peer->fifo_len = be32_to_cpu(params->fifo_len);
+ peer_set_state(peer, FWPS_ATTACHED);
+
+ /* reconfigure tx_fifo optimally for this peer */
+ spin_lock_bh(&port->lock);
+ port->max_payload = min3(peer->max_payload, peer->fifo_len,
+ MAX_ASYNC_PAYLOAD);
+ dma_fifo_change_tx_limit(&port->tx_fifo, port->max_payload);
+ spin_unlock_bh(&peer->port->lock);
+
+ if (port->port.console && port->fwcon_ops->notify != NULL)
+ (*port->fwcon_ops->notify)(FWCON_NOTIFY_ATTACH, port->con_data);
+
+ fwtty_info(&peer->unit, "peer (guid:%016llx) connected on %s",
+ (unsigned long long)peer->guid, dev_name(port->device));
+}
+
+static inline int fwserial_send_mgmt_sync(struct fwtty_peer *peer,
+ struct fwserial_mgmt_pkt *pkt)
+{
+ int generation;
+ int rcode, tries = 5;
+
+ do {
+ generation = peer->generation;
+ smp_rmb();
+
+ rcode = fw_run_transaction(peer->serial->card,
+ TCODE_WRITE_BLOCK_REQUEST,
+ peer->node_id,
+ generation, peer->speed,
+ peer->mgmt_addr,
+ pkt, be16_to_cpu(pkt->hdr.len));
+ if (rcode == RCODE_BUSY || rcode == RCODE_SEND_ERROR ||
+ rcode == RCODE_GENERATION) {
+ fwtty_dbg(&peer->unit, "mgmt write error: %d", rcode);
+ continue;
+ } else
+ break;
+ } while (--tries > 0);
+ return rcode;
+}
+
+/**
+ * fwserial_claim_port - attempt to claim port @ index for peer
+ *
+ * Returns ptr to claimed port or error code (as ERR_PTR())
+ * Can sleep - must be called from process context
+ */
+static struct fwtty_port *fwserial_claim_port(struct fwtty_peer *peer,
+ int index)
+{
+ struct fwtty_port *port;
+
+ if (index < 0 || index >= num_ports)
+ return ERR_PTR(-EINVAL);
+
+ /* must guarantee that previous port releases have completed */
+ synchronize_rcu();
+
+ port = peer->serial->ports[index];
+ spin_lock_bh(&port->lock);
+ if (!rcu_access_pointer(port->peer))
+ rcu_assign_pointer(port->peer, peer);
+ else
+ port = ERR_PTR(-EBUSY);
+ spin_unlock_bh(&port->lock);
+
+ return port;
+}
+
+/**
+ * fwserial_find_port - find avail port and claim for peer
+ *
+ * Returns ptr to claimed port or NULL if none avail
+ * Can sleep - must be called from process context
+ */
+static struct fwtty_port *fwserial_find_port(struct fwtty_peer *peer)
+{
+ struct fwtty_port **ports = peer->serial->ports;
+ int i;
+
+ /* must guarantee that previous port releases have completed */
+ synchronize_rcu();
+
+ /* TODO: implement optional GUID-to-specific port # matching */
+
+ /* find an unattached port (but not the loopback port, if present) */
+ for (i = 0; i < num_ttys; ++i) {
+ spin_lock_bh(&ports[i]->lock);
+ if (!ports[i]->peer) {
+ /* claim port */
+ rcu_assign_pointer(ports[i]->peer, peer);
+ spin_unlock_bh(&ports[i]->lock);
+ return ports[i];
+ }
+ spin_unlock_bh(&ports[i]->lock);
+ }
+ return NULL;
+}
+
+static void fwserial_release_port(struct fwtty_port *port)
+{
+ /* drop carrier (and all other line status) */
+ fwtty_update_port_status(port, 0);
+
+ spin_lock_bh(&port->lock);
+
+ /* reset dma fifo max transmission size back to S100 */
+ port->max_payload = link_speed_to_max_payload(SCODE_100);
+ dma_fifo_change_tx_limit(&port->tx_fifo, port->max_payload);
+
+ rcu_assign_pointer(port->peer, NULL);
+ spin_unlock_bh(&port->lock);
+
+ if (port->port.console && port->fwcon_ops->notify != NULL)
+ (*port->fwcon_ops->notify)(FWCON_NOTIFY_DETACH, port->con_data);
+}
+
+static void fwserial_plug_timeout(unsigned long data)
+{
+ struct fwtty_peer *peer = (struct fwtty_peer *) data;
+ struct fwtty_port *port;
+
+ spin_lock_bh(&peer->lock);
+ if (peer->state != FWPS_PLUG_PENDING) {
+ spin_unlock_bh(&peer->lock);
+ return;
+ }
+
+ port = peer_revert_state(peer);
+ spin_unlock_bh(&peer->lock);
+
+ if (port)
+ fwserial_release_port(port);
+}
+
+/**
+ * fwserial_connect_peer - initiate virtual cable with peer
+ *
+ * Returns 0 if VIRT_CABLE_PLUG request was successfully sent,
+ * otherwise error code. Must be called from process context.
+ */
+static int fwserial_connect_peer(struct fwtty_peer *peer)
+{
+ struct fwtty_port *port;
+ struct fwserial_mgmt_pkt *pkt;
+ int err, rcode;
+
+ pkt = kmalloc(sizeof(*pkt), GFP_KERNEL);
+ if (!pkt)
+ return -ENOMEM;
+
+ port = fwserial_find_port(peer);
+ if (!port) {
+ fwtty_err(&peer->unit, "avail ports in use");
+ err = -EBUSY;
+ goto free_pkt;
+ }
+
+ spin_lock_bh(&peer->lock);
+
+ /* only initiate VIRT_CABLE_PLUG if peer is currently not attached */
+ if (peer->state != FWPS_NOT_ATTACHED) {
+ err = -EBUSY;
+ goto release_port;
+ }
+
+ peer->port = port;
+ peer_set_state(peer, FWPS_PLUG_PENDING);
+
+ fill_plug_req(pkt, peer->port);
+
+ setup_timer(&peer->timer, fwserial_plug_timeout, (unsigned long)peer);
+ mod_timer(&peer->timer, jiffies + VIRT_CABLE_PLUG_TIMEOUT);
+ spin_unlock_bh(&peer->lock);
+
+ rcode = fwserial_send_mgmt_sync(peer, pkt);
+
+ spin_lock_bh(&peer->lock);
+ if (peer->state == FWPS_PLUG_PENDING && rcode != RCODE_COMPLETE) {
+ if (rcode == RCODE_CONFLICT_ERROR)
+ err = -EAGAIN;
+ else
+ err = -EIO;
+ goto cancel_timer;
+ }
+ spin_unlock_bh(&peer->lock);
+
+ kfree(pkt);
+ return 0;
+
+cancel_timer:
+ del_timer(&peer->timer);
+ peer_revert_state(peer);
+release_port:
+ spin_unlock_bh(&peer->lock);
+ fwserial_release_port(port);
+free_pkt:
+ kfree(pkt);
+ return err;
+}
+
+/**
+ * fwserial_close_port -
+ * HUP the tty (if the tty exists) and unregister the tty device.
+ * Only used by the unit driver upon unit removal to disconnect and
+ * cleanup all attached ports
+ *
+ * The port reference is put by fwtty_cleanup (if a reference was
+ * ever taken).
+ */
+static void fwserial_close_port(struct fwtty_port *port)
+{
+ struct tty_struct *tty;
+
+ mutex_lock(&port->port.mutex);
+ tty = tty_port_tty_get(&port->port);
+ if (tty) {
+ tty_vhangup(tty);
+ tty_kref_put(tty);
+ }
+ mutex_unlock(&port->port.mutex);
+
+ tty_unregister_device(fwtty_driver, port->index);
+}
+
+/**
+ * fwserial_lookup - finds first fw_serial associated with card
+ * @card: fw_card to match
+ *
+ * NB: caller must be holding fwserial_list_mutex
+ */
+static struct fw_serial *fwserial_lookup(struct fw_card *card)
+{
+ struct fw_serial *serial;
+
+ list_for_each_entry(serial, &fwserial_list, list) {
+ if (card == serial->card)
+ return serial;
+ }
+
+ return NULL;
+}
+
+/**
+ * __fwserial_lookup_rcu - finds first fw_serial associated with card
+ * @card: fw_card to match
+ *
+ * NB: caller must be inside rcu_read_lock() section
+ */
+static struct fw_serial *__fwserial_lookup_rcu(struct fw_card *card)
+{
+ struct fw_serial *serial;
+
+ list_for_each_entry_rcu(serial, &fwserial_list, list) {
+ if (card == serial->card)
+ return serial;
+ }
+
+ return NULL;
+}
+
+/**
+ * __fwserial_peer_by_node_id - finds a peer matching the given generation + id
+ *
+ * If a matching peer could not be found for the specified generation/node id,
+ * this could be because:
+ * a) the generation has changed and one of the nodes hasn't updated yet
+ * b) the remote node has created its remote unit device before this
+ * local node has created its corresponding remote unit device
+ * In either case, the remote node should retry
+ *
+ * Note: caller must be in rcu_read_lock() section
+ */
+static struct fwtty_peer *__fwserial_peer_by_node_id(struct fw_card *card,
+ int generation, int id)
+{
+ struct fw_serial *serial;
+ struct fwtty_peer *peer;
+
+ serial = __fwserial_lookup_rcu(card);
+ if (!serial) {
+ /*
+ * Something is very wrong - there should be a matching
+ * fw_serial structure for every fw_card. Maybe the remote node
+ * has created its remote unit device before this driver has
+ * been probed for any unit devices...
+ */
+ fwtty_err(card, "unknown card (guid %016llx)",
+ (unsigned long long) card->guid);
+ return NULL;
+ }
+
+ list_for_each_entry_rcu(peer, &serial->peer_list, list) {
+ int g = peer->generation;
+ smp_rmb();
+ if (generation == g && id == peer->node_id)
+ return peer;
+ }
+
+ return NULL;
+}
+
+#ifdef DEBUG
+static void __dump_peer_list(struct fw_card *card)
+{
+ struct fw_serial *serial;
+ struct fwtty_peer *peer;
+
+ serial = __fwserial_lookup_rcu(card);
+ if (!serial)
+ return;
+
+ list_for_each_entry_rcu(peer, &serial->peer_list, list) {
+ int g = peer->generation;
+ smp_rmb();
+ fwtty_dbg(card, "peer(%d:%x) guid: %016llx\n", g,
+ peer->node_id, (unsigned long long) peer->guid);
+ }
+}
+#else
+#define __dump_peer_list(s)
+#endif
+
+static void fwserial_auto_connect(struct work_struct *work)
+{
+ struct fwtty_peer *peer = to_peer(to_delayed_work(work), connect);
+ int err;
+
+ err = fwserial_connect_peer(peer);
+ if (err == -EAGAIN && ++peer->connect_retries < MAX_CONNECT_RETRIES)
+ schedule_delayed_work(&peer->connect, CONNECT_RETRY_DELAY);
+}
+
+/**
+ * fwserial_add_peer - add a newly probed 'serial' unit device as a 'peer'
+ * @serial: aggregate representing the specific fw_card to add the peer to
+ * @unit: 'peer' to create and add to peer_list of serial
+ *
+ * Adds a 'peer' (ie, a local or remote 'serial' unit device) to the list of
+ * peers for a specific fw_card. Optionally, auto-attach this peer to an
+ * available tty port. This function is called either directly or indirectly
+ * as a result of a 'serial' unit device being created & probed.
+ *
+ * Note: this function is serialized with fwserial_remove_peer() by the
+ * fwserial_list_mutex held in fwserial_probe().
+ *
+ * A 1:1 correspondence between an fw_unit and an fwtty_peer is maintained
+ * via the dev_set_drvdata() for the device of the fw_unit.
+ */
+static int fwserial_add_peer(struct fw_serial *serial, struct fw_unit *unit)
+{
+ struct device *dev = &unit->device;
+ struct fw_device *parent = fw_parent_device(unit);
+ struct fwtty_peer *peer;
+ struct fw_csr_iterator ci;
+ int key, val;
+ int generation;
+
+ peer = kzalloc(sizeof(*peer), GFP_KERNEL);
+ if (!peer)
+ return -ENOMEM;
+
+ peer_set_state(peer, FWPS_NOT_ATTACHED);
+
+ dev_set_drvdata(dev, peer);
+ peer->unit = unit;
+ peer->guid = (u64)parent->config_rom[3] << 32 | parent->config_rom[4];
+ peer->speed = parent->max_speed;
+ peer->max_payload = min(device_max_receive(parent),
+ link_speed_to_max_payload(peer->speed));
+
+ generation = parent->generation;
+ smp_rmb();
+ peer->node_id = parent->node_id;
+ smp_wmb();
+ peer->generation = generation;
+
+ /* retrieve the mgmt bus addr from the unit directory */
+ fw_csr_iterator_init(&ci, unit->directory);
+ while (fw_csr_iterator_next(&ci, &key, &val)) {
+ if (key == (CSR_OFFSET | CSR_DEPENDENT_INFO)) {
+ peer->mgmt_addr = CSR_REGISTER_BASE + 4 * val;
+ break;
+ }
+ }
+ if (peer->mgmt_addr == 0ULL) {
+ /*
+ * No mgmt address effectively disables VIRT_CABLE_PLUG -
+ * this peer will not be able to attach to a remote
+ */
+ peer_set_state(peer, FWPS_NO_MGMT_ADDR);
+ }
+
+ spin_lock_init(&peer->lock);
+ peer->port = NULL;
+
+ init_timer(&peer->timer);
+ INIT_WORK(&peer->work, NULL);
+ INIT_DELAYED_WORK(&peer->connect, fwserial_auto_connect);
+
+ /* associate peer with specific fw_card */
+ peer->serial = serial;
+ list_add_rcu(&peer->list, &serial->peer_list);
+
+ fwtty_info(&peer->unit, "peer added (guid:%016llx)",
+ (unsigned long long)peer->guid);
+
+ /* identify the local unit & virt cable to loopback port */
+ if (parent->is_local) {
+ serial->self = peer;
+ if (create_loop_dev) {
+ struct fwtty_port *port;
+ port = fwserial_claim_port(peer, num_ttys);
+ if (!IS_ERR(port)) {
+ struct virt_plug_params params;
+
+ spin_lock_bh(&peer->lock);
+ peer->port = port;
+ fill_plug_params(¶ms, port);
+ fwserial_virt_plug_complete(peer, ¶ms);
+ spin_unlock_bh(&peer->lock);
+
+ fwtty_write_port_status(port);
+ }
+ }
+
+ } else if (auto_connect) {
+ /* auto-attach to remote units only (if policy allows) */
+ schedule_delayed_work(&peer->connect, 1);
+ }
+
+ return 0;
+}
+
+/**
+ * fwserial_remove_peer - remove a 'serial' unit device as a 'peer'
+ *
+ * Remove a 'peer' from its list of peers. This function is only
+ * called by fwserial_remove() on bus removal of the unit device.
+ *
+ * Note: this function is serialized with fwserial_add_peer() by the
+ * fwserial_list_mutex held in fwserial_remove().
+ */
+static void fwserial_remove_peer(struct fwtty_peer *peer)
+{
+ struct fwtty_port *port;
+
+ spin_lock_bh(&peer->lock);
+ peer_set_state(peer, FWPS_GONE);
+ spin_unlock_bh(&peer->lock);
+
+ cancel_delayed_work_sync(&peer->connect);
+ cancel_work_sync(&peer->work);
+
+ spin_lock_bh(&peer->lock);
+ /* if this unit is the local unit, clear link */
+ if (peer == peer->serial->self)
+ peer->serial->self = NULL;
+
+ /* cancel the request timeout timer (if running) */
+ del_timer(&peer->timer);
+
+ port = peer->port;
+ peer->port = NULL;
+
+ list_del_rcu(&peer->list);
+
+ fwtty_info(&peer->unit, "peer removed (guid:%016llx)",
+ (unsigned long long)peer->guid);
+
+ spin_unlock_bh(&peer->lock);
+
+ if (port)
+ fwserial_release_port(port);
+
+ synchronize_rcu();
+ kfree(peer);
+}
+
+/**
+ * create_loop_device - create a loopback tty device
+ * @tty_driver: tty_driver to own loopback device
+ * @prototype: ptr to already-assigned 'prototype' tty port
+ * @index: index to associate this device with the tty port
+ * @parent: device to child to
+ *
+ * HACK - this is basically tty_port_register_device() with an
+ * alternate naming scheme. Suggest tty_port_register_named_device()
+ * helper api.
+ *
+ * Creates a loopback tty device named 'fwloop<n>' which is attached to
+ * the local unit in fwserial_add_peer(). Note that <n> in the device
+ * name advances in increments of port allocation blocks, ie., for port
+ * indices 0..3, the device name will be 'fwloop0'; for 4..7, 'fwloop1',
+ * and so on.
+ *
+ * Only one loopback device should be created per fw_card.
+ */
+static void release_loop_device(struct device *dev)
+{
+ kfree(dev);
+}
+
+static struct device *create_loop_device(struct tty_driver *driver,
+ struct fwtty_port *prototype,
+ struct fwtty_port *port,
+ struct device *parent)
+{
+ char name[64];
+ int index = port->index;
+ dev_t devt = MKDEV(driver->major, driver->minor_start) + index;
+ struct device *dev = NULL;
+ int err;
+
+ if (index >= fwtty_driver->num)
+ return ERR_PTR(-EINVAL);
+
+ snprintf(name, 64, "%s%d", loop_dev_name, index / num_ports);
+
+ tty_port_link_device(&port->port, driver, index);
+
+ cdev_init(&driver->cdevs[index], driver->cdevs[prototype->index].ops);
+ driver->cdevs[index].owner = driver->owner;
+ err = cdev_add(&driver->cdevs[index], devt, 1);
+ if (err)
+ return ERR_PTR(err);
+
+ dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+ if (!dev) {
+ cdev_del(&driver->cdevs[index]);
+ return ERR_PTR(-ENOMEM);
+ }
+
+ dev->devt = devt;
+ dev->class = prototype->device->class;
+ dev->parent = parent;
+ dev->release = release_loop_device;
+ dev_set_name(dev, "%s", name);
+ dev->groups = NULL;
+ dev_set_drvdata(dev, NULL);
+
+ err = device_register(dev);
+ if (err) {
+ put_device(dev);
+ cdev_del(&driver->cdevs[index]);
+ return ERR_PTR(err);
+ }
+
+ return dev;
+}
+
+/**
+ * fwserial_create - init everything to create TTYs for a specific fw_card
+ * @unit: fw_unit for first 'serial' unit device probed for this fw_card
+ *
+ * This function inits the aggregate structure (an fw_serial instance)
+ * used to manage the TTY ports registered by a specific fw_card. Also, the
+ * unit device is added as the first 'peer'.
+ *
+ * This unit device may represent a local unit device (as specified by the
+ * config ROM unit directory) or it may represent a remote unit device
+ * (as specified by the reading of the remote node's config ROM).
+ *
+ * Returns 0 to indicate "ownership" of the unit device, or a negative errno
+ * value to indicate which error.
+ */
+static int fwserial_create(struct fw_unit *unit)
+{
+ struct fw_device *parent = fw_parent_device(unit);
+ struct fw_card *card = parent->card;
+ struct fw_serial *serial;
+ struct fwtty_port *port;
+ struct device *tty_dev;
+ int i, j;
+ int err;
+
+ serial = kzalloc(sizeof(*serial), GFP_KERNEL);
+ if (!serial)
+ return -ENOMEM;
+
+ kref_init(&serial->kref);
+ serial->card = card;
+ INIT_LIST_HEAD(&serial->peer_list);
+
+ for (i = 0; i < num_ports; ++i) {
+ port = kzalloc(sizeof(*port), GFP_KERNEL);
+ if (!port) {
+ err = -ENOMEM;
+ goto free_ports;
+ }
+ tty_port_init(&port->port);
+ port->index = FWTTY_INVALID_INDEX;
+ port->port.ops = &fwtty_port_ops;
+ port->serial = serial;
+
+ spin_lock_init(&port->lock);
+ INIT_DELAYED_WORK(&port->drain, fwtty_drain_tx);
+ INIT_DELAYED_WORK(&port->emit_breaks, fwtty_emit_breaks);
+ INIT_WORK(&port->hangup, fwtty_do_hangup);
+ INIT_WORK(&port->push, fwtty_pushrx);
+ INIT_LIST_HEAD(&port->buf_list);
+ init_waitqueue_head(&port->wait_tx);
+ port->max_payload = link_speed_to_max_payload(SCODE_100);
+ dma_fifo_init(&port->tx_fifo);
+
+ rcu_assign_pointer(port->peer, NULL);
+ serial->ports[i] = port;
+
+ /* get unique bus addr region for port's status & recv fifo */
+ port->rx_handler.length = FWTTY_PORT_RXFIFO_LEN + 4;
+ port->rx_handler.address_callback = fwtty_port_handler;
+ port->rx_handler.callback_data = port;
+ /*
+ * XXX: use custom memory region above cpu physical memory addrs
+ * this will ease porting to 64-bit firewire adapters
+ */
+ err = fw_core_add_address_handler(&port->rx_handler,
+ &fw_high_memory_region);
+ if (err) {
+ kfree(port);
+ goto free_ports;
+ }
+ }
+ /* preserve i for error cleanup */
+
+ err = fwtty_ports_add(serial);
+ if (err) {
+ fwtty_err(&unit, "no space in port table");
+ goto free_ports;
+ }
+
+ for (j = 0; j < num_ttys; ++j) {
+ tty_dev = tty_port_register_device(&serial->ports[j]->port,
+ fwtty_driver,
+ serial->ports[j]->index,
+ card->device);
+ if (IS_ERR(tty_dev)) {
+ err = PTR_ERR(tty_dev);
+ fwtty_err(&unit, "register tty device error (%d)", err);
+ goto unregister_ttys;
+ }
+
+ serial->ports[j]->device = tty_dev;
+ }
+ /* preserve j for error cleanup */
+
+ if (create_loop_dev) {
+ struct device *loop_dev;
+
+ loop_dev = create_loop_device(fwtty_driver,
+ serial->ports[0],
+ serial->ports[num_ttys],
+ card->device);
+ if (IS_ERR(loop_dev)) {
+ err = PTR_ERR(loop_dev);
+ fwtty_err(&unit, "create loop device failed (%d)", err);
+ goto unregister_ttys;
+ }
+ serial->ports[num_ttys]->device = loop_dev;
+ serial->ports[num_ttys]->loopback = true;
+ }
+
+ list_add_rcu(&serial->list, &fwserial_list);
+
+ fwtty_notice(&unit, "TTY over FireWire on device %s (guid %016llx)",
+ dev_name(card->device), (unsigned long long) card->guid);
+
+ err = fwserial_add_peer(serial, unit);
+ if (!err)
+ return 0;
+
+ fwtty_err(&unit, "unable to add peer unit device (%d)", err);
+
+ /* fall-through to error processing */
+ list_del_rcu(&serial->list);
+unregister_ttys:
+ for (--j; j >= 0; --j)
+ tty_unregister_device(fwtty_driver, serial->ports[j]->index);
+ kref_put(&serial->kref, fwserial_destroy);
+ return err;
+
+free_ports:
+ for (--i; i >= 0; --i) {
+ tty_port_destroy(&serial->ports[i]->port);
+ kfree(serial->ports[i]);
+ }
+ kfree(serial);
+ return err;
+}
+
+/**
+ * fwserial_probe: bus probe function for firewire 'serial' unit devices
+ *
+ * A 'serial' unit device is created and probed as a result of:
+ * - declaring a ieee1394 bus id table for 'devices' matching a fabricated
+ * 'serial' unit specifier id
+ * - adding a unit directory to the config ROM(s) for a 'serial' unit
+ *
+ * The firewire core registers unit devices by enumerating unit directories
+ * of a node's config ROM after reading the config ROM when a new node is
+ * added to the bus topology after a bus reset.
+ *
+ * The practical implications of this are:
+ * - this probe is called for both local and remote nodes that have a 'serial'
+ * unit directory in their config ROM (that matches the specifiers in
+ * fwserial_id_table).
+ * - no specific order is enforced for local vs. remote unit devices
+ *
+ * This unit driver copes with the lack of specific order in the same way the
+ * firewire net driver does -- each probe, for either a local or remote unit
+ * device, is treated as a 'peer' (has a struct fwtty_peer instance) and the
+ * first peer created for a given fw_card (tracked by the global fwserial_list)
+ * creates the underlying TTYs (aggregated in a fw_serial instance).
+ *
+ * NB: an early attempt to differentiate local & remote unit devices by creating
+ * peers only for remote units and fw_serial instances (with their
+ * associated TTY devices) only for local units was discarded. Managing
+ * the peer lifetimes on device removal proved too complicated.
+ *
+ * fwserial_probe/fwserial_remove are effectively serialized by the
+ * fwserial_list_mutex. This is necessary because the addition of the first peer
+ * for a given fw_card will trigger the creation of the fw_serial for that
+ * fw_card, which must not simultaneously contend with the removal of the
+ * last peer for a given fw_card triggering the destruction of the same
+ * fw_serial for the same fw_card.
+ */
+static int fwserial_probe(struct device *dev)
+{
+ struct fw_unit *unit = fw_unit(dev);
+ struct fw_serial *serial;
+ int err;
+
+ mutex_lock(&fwserial_list_mutex);
+ serial = fwserial_lookup(fw_parent_device(unit)->card);
+ if (!serial)
+ err = fwserial_create(unit);
+ else
+ err = fwserial_add_peer(serial, unit);
+ mutex_unlock(&fwserial_list_mutex);
+ return err;
+}
+
+/**
+ * fwserial_remove: bus removal function for firewire 'serial' unit devices
+ *
+ * The corresponding 'peer' for this unit device is removed from the list of
+ * peers for the associated fw_serial (which has a 1:1 correspondence with a
+ * specific fw_card). If this is the last peer being removed, then trigger
+ * the destruction of the underlying TTYs.
+ */
+static int fwserial_remove(struct device *dev)
+{
+ struct fwtty_peer *peer = dev_get_drvdata(dev);
+ struct fw_serial *serial = peer->serial;
+ int i;
+
+ mutex_lock(&fwserial_list_mutex);
+ fwserial_remove_peer(peer);
+
+ if (list_empty(&serial->peer_list)) {
+ /* unlink from the fwserial_list here */
+ list_del_rcu(&serial->list);
+
+ for (i = 0; i < num_ports; ++i)
+ fwserial_close_port(serial->ports[i]);
+ kref_put(&serial->kref, fwserial_destroy);
+ }
+ mutex_unlock(&fwserial_list_mutex);
+
+ return 0;
+}
+
+/**
+ * fwserial_update: bus update function for 'firewire' serial unit devices
+ *
+ * Updates the new node_id and bus generation for this peer. Note that locking
+ * is unnecessary; but careful memory barrier usage is important to enforce the
+ * load and store order of generation & node_id.
+ *
+ * The fw-core orders the write of node_id before generation in the parent
+ * fw_device to ensure that a stale node_id cannot be used with a current
+ * bus generation. So the generation value must be read before the node_id.
+ *
+ * In turn, this orders the write of node_id before generation in the peer to
+ * also ensure a stale node_id cannot be used with a current bus generation.
+ */
+static void fwserial_update(struct fw_unit *unit)
+{
+ struct fw_device *parent = fw_parent_device(unit);
+ struct fwtty_peer *peer = dev_get_drvdata(&unit->device);
+ int generation;
+
+ generation = parent->generation;
+ smp_rmb();
+ peer->node_id = parent->node_id;
+ smp_wmb();
+ peer->generation = generation;
+}
+
+static const struct ieee1394_device_id fwserial_id_table[] = {
+ {
+ .match_flags = IEEE1394_MATCH_SPECIFIER_ID |
+ IEEE1394_MATCH_VERSION,
+ .specifier_id = LINUX_VENDOR_ID,
+ .version = FWSERIAL_VERSION,
+ },
+ { }
+};
+
+static struct fw_driver fwserial_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = KBUILD_MODNAME,
+ .bus = &fw_bus_type,
+ .probe = fwserial_probe,
+ .remove = fwserial_remove,
+ },
+ .update = fwserial_update,
+ .id_table = fwserial_id_table,
+};
+
+#define FW_UNIT_SPECIFIER(id) ((CSR_SPECIFIER_ID << 24) | (id))
+#define FW_UNIT_VERSION(ver) ((CSR_VERSION << 24) | (ver))
+#define FW_UNIT_ADDRESS(ofs) (((CSR_OFFSET | CSR_DEPENDENT_INFO) << 24) \
+ | (((ofs) - CSR_REGISTER_BASE) >> 2))
+/* XXX: config ROM definitons could be improved with semi-automated offset
+ * and length calculation
+ */
+#define FW_ROM_DESCRIPTOR(ofs) (((CSR_LEAF | CSR_DESCRIPTOR) << 24) | (ofs))
+
+struct fwserial_unit_directory_data {
+ u16 crc;
+ u16 len;
+ u32 unit_specifier;
+ u32 unit_sw_version;
+ u32 unit_addr_offset;
+ u32 desc1_ofs;
+ u16 desc1_crc;
+ u16 desc1_len;
+ u32 desc1_data[5];
+} __packed;
+
+static struct fwserial_unit_directory_data fwserial_unit_directory_data = {
+ .len = 4,
+ .unit_specifier = FW_UNIT_SPECIFIER(LINUX_VENDOR_ID),
+ .unit_sw_version = FW_UNIT_VERSION(FWSERIAL_VERSION),
+ .desc1_ofs = FW_ROM_DESCRIPTOR(1),
+ .desc1_len = 5,
+ .desc1_data = {
+ 0x00000000, /* type = text */
+ 0x00000000, /* enc = ASCII, lang EN */
+ 0x4c696e75, /* 'Linux TTY' */
+ 0x78205454,
+ 0x59000000,
+ },
+};
+
+static struct fw_descriptor fwserial_unit_directory = {
+ .length = sizeof(fwserial_unit_directory_data) / sizeof(u32),
+ .key = (CSR_DIRECTORY | CSR_UNIT) << 24,
+ .data = (u32 *)&fwserial_unit_directory_data,
+};
+
+/*
+ * The management address is in the unit space region but above other known
+ * address users (to keep wild writes from causing havoc)
+ */
+const struct fw_address_region fwserial_mgmt_addr_region = {
+ .start = CSR_REGISTER_BASE + 0x1e0000ULL,
+ .end = 0x1000000000000ULL,
+};
+
+static struct fw_address_handler fwserial_mgmt_addr_handler;
+
+/**
+ * fwserial_handle_plug_req - handle VIRT_CABLE_PLUG request work
+ * @work: ptr to peer->work
+ *
+ * Attempts to complete the VIRT_CABLE_PLUG handshake sequence for this peer.
+ *
+ * This checks for a collided request-- ie, that a VIRT_CABLE_PLUG request was
+ * already sent to this peer. If so, the collision is resolved by comparing
+ * guid values; the loser sends the plug response.
+ *
+ * Note: if an error prevents a response, don't do anything -- the
+ * remote will timeout its request.
+ */
+static void fwserial_handle_plug_req(struct work_struct *work)
+{
+ struct fwtty_peer *peer = to_peer(work, work);
+ struct virt_plug_params *plug_req = &peer->work_params.plug_req;
+ struct fwtty_port *port;
+ struct fwserial_mgmt_pkt *pkt;
+ int rcode;
+
+ pkt = kmalloc(sizeof(*pkt), GFP_KERNEL);
+ if (!pkt)
+ return;
+
+ port = fwserial_find_port(peer);
+
+ spin_lock_bh(&peer->lock);
+
+ switch (peer->state) {
+ case FWPS_NOT_ATTACHED:
+ if (!port) {
+ fwtty_err(&peer->unit, "no more ports avail");
+ fill_plug_rsp_nack(pkt);
+ } else {
+ peer->port = port;
+ fill_plug_rsp_ok(pkt, peer->port);
+ peer_set_state(peer, FWPS_PLUG_RESPONDING);
+ /* don't release claimed port */
+ port = NULL;
+ }
+ break;
+
+ case FWPS_PLUG_PENDING:
+ if (peer->serial->card->guid > peer->guid)
+ goto cleanup;
+
+ /* We lost - hijack the already-claimed port and send ok */
+ del_timer(&peer->timer);
+ fill_plug_rsp_ok(pkt, peer->port);
+ peer_set_state(peer, FWPS_PLUG_RESPONDING);
+ break;
+
+ default:
+ fill_plug_rsp_nack(pkt);
+ }
+
+ spin_unlock_bh(&peer->lock);
+ if (port)
+ fwserial_release_port(port);
+
+ rcode = fwserial_send_mgmt_sync(peer, pkt);
+
+ spin_lock_bh(&peer->lock);
+ if (peer->state == FWPS_PLUG_RESPONDING) {
+ if (rcode == RCODE_COMPLETE) {
+ struct fwtty_port *tmp = peer->port;
+
+ fwserial_virt_plug_complete(peer, plug_req);
+ spin_unlock_bh(&peer->lock);
+
+ fwtty_write_port_status(tmp);
+ spin_lock_bh(&peer->lock);
+ } else {
+ fwtty_err(&peer->unit, "PLUG_RSP error (%d)", rcode);
+ port = peer_revert_state(peer);
+ }
+ }
+cleanup:
+ spin_unlock_bh(&peer->lock);
+ if (port)
+ fwserial_release_port(port);
+ kfree(pkt);
+ return;
+}
+
+static void fwserial_handle_unplug_req(struct work_struct *work)
+{
+ struct fwtty_peer *peer = to_peer(work, work);
+ struct fwtty_port *port = NULL;
+ struct fwserial_mgmt_pkt *pkt;
+ int rcode;
+
+ pkt = kmalloc(sizeof(*pkt), GFP_KERNEL);
+ if (!pkt)
+ return;
+
+ spin_lock_bh(&peer->lock);
+
+ switch (peer->state) {
+ case FWPS_ATTACHED:
+ fill_unplug_rsp_ok(pkt);
+ peer_set_state(peer, FWPS_UNPLUG_RESPONDING);
+ break;
+
+ case FWPS_UNPLUG_PENDING:
+ if (peer->serial->card->guid > peer->guid)
+ goto cleanup;
+
+ /* We lost - send unplug rsp */
+ del_timer(&peer->timer);
+ fill_unplug_rsp_ok(pkt);
+ peer_set_state(peer, FWPS_UNPLUG_RESPONDING);
+ break;
+
+ default:
+ fill_unplug_rsp_nack(pkt);
+ }
+
+ spin_unlock_bh(&peer->lock);
+
+ rcode = fwserial_send_mgmt_sync(peer, pkt);
+
+ spin_lock_bh(&peer->lock);
+ if (peer->state == FWPS_UNPLUG_RESPONDING) {
+ if (rcode == RCODE_COMPLETE)
+ port = peer_revert_state(peer);
+ else
+ fwtty_err(&peer->unit, "UNPLUG_RSP error (%d)", rcode);
+ }
+cleanup:
+ spin_unlock_bh(&peer->lock);
+ if (port)
+ fwserial_release_port(port);
+ kfree(pkt);
+ return;
+}
+
+static int fwserial_parse_mgmt_write(struct fwtty_peer *peer,
+ struct fwserial_mgmt_pkt *pkt,
+ unsigned long long addr,
+ size_t len)
+{
+ struct fwtty_port *port = NULL;
+ int rcode;
+
+ if (addr != fwserial_mgmt_addr_handler.offset || len < sizeof(pkt->hdr))
+ return RCODE_ADDRESS_ERROR;
+
+ if (len != be16_to_cpu(pkt->hdr.len) ||
+ len != mgmt_pkt_expected_len(pkt->hdr.code))
+ return RCODE_DATA_ERROR;
+
+ spin_lock_bh(&peer->lock);
+ if (peer->state == FWPS_GONE) {
+ /*
+ * This should never happen - it would mean that the
+ * remote unit that just wrote this transaction was
+ * already removed from the bus -- and the removal was
+ * processed before we rec'd this transaction
+ */
+ fwtty_err(&peer->unit, "peer already removed");
+ spin_unlock_bh(&peer->lock);
+ return RCODE_ADDRESS_ERROR;
+ }
+
+ rcode = RCODE_COMPLETE;
+
+ fwtty_dbg(&peer->unit, "mgmt: hdr.code: %04hx", pkt->hdr.code);
+
+ switch (be16_to_cpu(pkt->hdr.code) & FWSC_CODE_MASK) {
+ case FWSC_VIRT_CABLE_PLUG:
+ if (work_pending(&peer->work)) {
+ fwtty_err(&peer->unit, "plug req: busy");
+ rcode = RCODE_CONFLICT_ERROR;
+
+ } else {
+ peer->work_params.plug_req = pkt->plug_req;
+ PREPARE_WORK(&peer->work, fwserial_handle_plug_req);
+ queue_work(system_unbound_wq, &peer->work);
+ }
+ break;
+
+ case FWSC_VIRT_CABLE_PLUG_RSP:
+ if (peer->state != FWPS_PLUG_PENDING) {
+ rcode = RCODE_CONFLICT_ERROR;
+
+ } else if (be16_to_cpu(pkt->hdr.code) & FWSC_RSP_NACK) {
+ fwtty_notice(&peer->unit, "NACK plug rsp");
+ port = peer_revert_state(peer);
+
+ } else {
+ struct fwtty_port *tmp = peer->port;
+
+ fwserial_virt_plug_complete(peer, &pkt->plug_rsp);
+ spin_unlock_bh(&peer->lock);
+
+ fwtty_write_port_status(tmp);
+ spin_lock_bh(&peer->lock);
+ }
+ break;
+
+ case FWSC_VIRT_CABLE_UNPLUG:
+ if (work_pending(&peer->work)) {
+ fwtty_err(&peer->unit, "unplug req: busy");
+ rcode = RCODE_CONFLICT_ERROR;
+ } else {
+ PREPARE_WORK(&peer->work, fwserial_handle_unplug_req);
+ queue_work(system_unbound_wq, &peer->work);
+ }
+ break;
+
+ case FWSC_VIRT_CABLE_UNPLUG_RSP:
+ if (peer->state != FWPS_UNPLUG_PENDING)
+ rcode = RCODE_CONFLICT_ERROR;
+ else {
+ if (be16_to_cpu(pkt->hdr.code) & FWSC_RSP_NACK)
+ fwtty_notice(&peer->unit, "NACK unplug?");
+ port = peer_revert_state(peer);
+ }
+ break;
+
+ default:
+ fwtty_err(&peer->unit, "unknown mgmt code %d",
+ be16_to_cpu(pkt->hdr.code));
+ rcode = RCODE_DATA_ERROR;
+ }
+ spin_unlock_bh(&peer->lock);
+
+ if (port)
+ fwserial_release_port(port);
+
+ return rcode;
+}
+
+/**
+ * fwserial_mgmt_handler: bus address handler for mgmt requests
+ * @parameters: fw_address_callback_t as specified by firewire core interface
+ *
+ * This handler is responsible for handling virtual cable requests from remotes
+ * for all cards.
+ */
+static void fwserial_mgmt_handler(struct fw_card *card,
+ struct fw_request *request,
+ int tcode, int destination, int source,
+ int generation,
+ unsigned long long addr,
+ void *data, size_t len,
+ void *callback_data)
+{
+ struct fwserial_mgmt_pkt *pkt = data;
+ struct fwtty_peer *peer;
+ int rcode;
+
+ rcu_read_lock();
+ peer = __fwserial_peer_by_node_id(card, generation, source);
+ if (!peer) {
+ fwtty_dbg(card, "peer(%d:%x) not found", generation, source);
+ __dump_peer_list(card);
+ rcode = RCODE_CONFLICT_ERROR;
+
+ } else {
+ switch (tcode) {
+ case TCODE_WRITE_BLOCK_REQUEST:
+ rcode = fwserial_parse_mgmt_write(peer, pkt, addr, len);
+ break;
+
+ default:
+ rcode = RCODE_TYPE_ERROR;
+ }
+ }
+
+ rcu_read_unlock();
+ fw_send_response(card, request, rcode);
+}
+
+static int __init fwserial_init(void)
+{
+ int err, num_loops = !!(create_loop_dev);
+
+ /* num_ttys/num_ports must not be set above the static alloc avail */
+ if (num_ttys + num_loops > MAX_CARD_PORTS)
+ num_ttys = MAX_CARD_PORTS - num_loops;
+ num_ports = num_ttys + num_loops;
+
+ fwtty_driver = alloc_tty_driver(MAX_TOTAL_PORTS);
+ if (!fwtty_driver) {
+ err = -ENOMEM;
+ return err;
+ }
+
+ fwtty_driver->driver_name = KBUILD_MODNAME;
+ fwtty_driver->name = tty_dev_name;
+ fwtty_driver->major = 0;
+ fwtty_driver->minor_start = 0;
+ fwtty_driver->type = TTY_DRIVER_TYPE_SERIAL;
+ fwtty_driver->subtype = SERIAL_TYPE_NORMAL;
+ fwtty_driver->flags = TTY_DRIVER_REAL_RAW |
+ TTY_DRIVER_DYNAMIC_DEV;
+
+ fwtty_driver->init_termios = tty_std_termios;
+ fwtty_driver->init_termios.c_cflag |= CLOCAL;
+ tty_set_operations(fwtty_driver, &fwtty_ops);
+
+ err = tty_register_driver(fwtty_driver);
+ if (err) {
+ driver_err("register tty driver failed (%d)", err);
+ goto put_tty;
+ }
+
+ fwtty_txn_cache = kmem_cache_create("fwtty_txn_cache",
+ sizeof(struct fwtty_transaction),
+ 0, 0, fwtty_txn_constructor);
+ if (!fwtty_txn_cache) {
+ err = -ENOMEM;
+ goto unregister_driver;
+ }
+
+ /*
+ * Ideally, this address handler would be registered per local node
+ * (rather than the same handler for all local nodes). However,
+ * since the firewire core requires the config rom descriptor *before*
+ * the local unit device(s) are created, a single management handler
+ * must suffice for all local serial units.
+ */
+ fwserial_mgmt_addr_handler.length = sizeof(struct fwserial_mgmt_pkt);
+ fwserial_mgmt_addr_handler.address_callback = fwserial_mgmt_handler;
+
+ err = fw_core_add_address_handler(&fwserial_mgmt_addr_handler,
+ &fwserial_mgmt_addr_region);
+ if (err) {
+ driver_err("add management handler failed (%d)", err);
+ goto destroy_cache;
+ }
+
+ fwserial_unit_directory_data.unit_addr_offset =
+ FW_UNIT_ADDRESS(fwserial_mgmt_addr_handler.offset);
+ err = fw_core_add_descriptor(&fwserial_unit_directory);
+ if (err) {
+ driver_err("add unit descriptor failed (%d)", err);
+ goto remove_handler;
+ }
+
+ err = driver_register(&fwserial_driver.driver);
+ if (err) {
+ driver_err("register fwserial driver failed (%d)", err);
+ goto remove_descriptor;
+ }
+
+ return 0;
+
+remove_descriptor:
+ fw_core_remove_descriptor(&fwserial_unit_directory);
+remove_handler:
+ fw_core_remove_address_handler(&fwserial_mgmt_addr_handler);
+destroy_cache:
+ kmem_cache_destroy(fwtty_txn_cache);
+unregister_driver:
+ tty_unregister_driver(fwtty_driver);
+put_tty:
+ put_tty_driver(fwtty_driver);
+ return err;
+}
+
+static void __exit fwserial_exit(void)
+{
+ driver_unregister(&fwserial_driver.driver);
+ fw_core_remove_descriptor(&fwserial_unit_directory);
+ fw_core_remove_address_handler(&fwserial_mgmt_addr_handler);
+ kmem_cache_destroy(fwtty_txn_cache);
+ tty_unregister_driver(fwtty_driver);
+ put_tty_driver(fwtty_driver);
+}
+
+module_init(fwserial_init);
+module_exit(fwserial_exit);
+
+MODULE_AUTHOR("Peter Hurley (peter@hurleysoftware.com)");
+MODULE_DESCRIPTION("FireWire Serial TTY Driver");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(ieee1394, fwserial_id_table);
+MODULE_PARM_DESC(ttys, "Number of ttys to create for each local firewire node");
+MODULE_PARM_DESC(auto, "Auto-connect a tty to each firewire node discovered");
+MODULE_PARM_DESC(loop, "Create a loopback device, fwloop<n>, with ttys");
+MODULE_PARM_DESC(limit_bw, "Limit bandwidth utilization to 20%.");
diff --git a/drivers/staging/fwserial/fwserial.h b/drivers/staging/fwserial/fwserial.h
new file mode 100644
index 0000000..8b572ed
--- /dev/null
+++ b/drivers/staging/fwserial/fwserial.h
@@ -0,0 +1,387 @@
+#ifndef _FIREWIRE_FWSERIAL_H
+#define _FIREWIRE_FWSERIAL_H
+
+#include <linux/kernel.h>
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+#include <linux/list.h>
+#include <linux/firewire.h>
+#include <linux/firewire-constants.h>
+#include <linux/spinlock.h>
+#include <linux/rcupdate.h>
+#include <linux/mutex.h>
+#include <linux/serial.h>
+#include <linux/serial_reg.h>
+#include <linux/module.h>
+#include <linux/seq_file.h>
+
+#include "dma_fifo.h"
+
+#ifdef FWTTY_PROFILING
+#define DISTRIBUTION_MAX_SIZE 8192
+#define DISTRIBUTION_MAX_INDEX (ilog2(DISTRIBUTION_MAX_SIZE) + 1)
+static inline void profile_size_distrib(unsigned stat[], unsigned val)
+{
+ int n = (val) ? min(ilog2(val) + 1, DISTRIBUTION_MAX_INDEX) : 0;
+ ++stat[n];
+}
+#else
+#define DISTRIBUTION_MAX_INDEX 0
+#define profile_size_distrib(st, n)
+#endif
+
+/* Parameters for both VIRT_CABLE_PLUG & VIRT_CABLE_PLUG_RSP mgmt codes */
+struct virt_plug_params {
+ __be32 status_hi;
+ __be32 status_lo;
+ __be32 fifo_hi;
+ __be32 fifo_lo;
+ __be32 fifo_len;
+};
+
+struct peer_work_params {
+ union {
+ struct virt_plug_params plug_req;
+ };
+};
+
+/**
+ * fwtty_peer: structure representing local & remote unit devices
+ * @unit: unit child device of fw_device node
+ * @serial: back pointer to associated fw_serial aggregate
+ * @guid: unique 64-bit guid for this unit device
+ * @generation: most recent bus generation
+ * @node_id: most recent node_id
+ * @speed: link speed of peer (0 = S100, 2 = S400, ... 5 = S3200)
+ * @mgmt_addr: bus addr region to write mgmt packets to
+ * @status_addr: bus addr register to write line status to
+ * @fifo_addr: bus addr region to write serial output to
+ * @fifo_len: max length for single write to fifo_addr
+ * @list: link for insertion into fw_serial's peer_list
+ * @rcu: for deferring peer reclamation
+ * @lock: spinlock to synchonize changes to state & port fields
+ * @work: only one work item can be queued at any one time
+ * Note: pending work is canceled prior to removal, so this
+ * peer is valid for at least the lifetime of the work function
+ * @work_params: parameter block for work functions
+ * @timer: timer for resetting peer state if remote request times out
+ * @state: current state
+ * @connect: work item for auto-connecting
+ * @connect_retries: # of connections already attempted
+ * @port: associated tty_port (usable if state == FWSC_ATTACHED)
+ */
+struct fwtty_peer {
+ struct fw_unit *unit;
+ struct fw_serial *serial;
+ u64 guid;
+ int generation;
+ int node_id;
+ unsigned speed;
+ int max_payload;
+ u64 mgmt_addr;
+
+ /* these are usable only if state == FWSC_ATTACHED */
+ u64 status_addr;
+ u64 fifo_addr;
+ int fifo_len;
+
+ struct list_head list;
+ struct rcu_head rcu;
+
+ spinlock_t lock;
+ struct work_struct work;
+ struct peer_work_params work_params;
+ struct timer_list timer;
+ int state;
+ struct delayed_work connect;
+ int connect_retries;
+
+ struct fwtty_port *port;
+};
+
+#define to_peer(ptr, field) (container_of(ptr, struct fwtty_peer, field))
+
+/* state values for fwtty_peer.state field */
+enum fwtty_peer_state {
+ FWPS_GONE,
+ FWPS_NOT_ATTACHED,
+ FWPS_ATTACHED,
+ FWPS_PLUG_PENDING,
+ FWPS_PLUG_RESPONDING,
+ FWPS_UNPLUG_PENDING,
+ FWPS_UNPLUG_RESPONDING,
+
+ FWPS_NO_MGMT_ADDR = -1,
+};
+
+#define CONNECT_RETRY_DELAY HZ
+#define MAX_CONNECT_RETRIES 10
+
+/* must be holding peer lock for these state funclets */
+static inline void peer_set_state(struct fwtty_peer *peer, int new)
+{
+ peer->state = new;
+}
+
+static inline struct fwtty_port *peer_revert_state(struct fwtty_peer *peer)
+{
+ struct fwtty_port *port = peer->port;
+
+ peer->port = NULL;
+ peer_set_state(peer, FWPS_NOT_ATTACHED);
+ return port;
+}
+
+struct fwserial_mgmt_pkt {
+ struct {
+ __be16 len;
+ __be16 code;
+ } hdr;
+ union {
+ struct virt_plug_params plug_req;
+ struct virt_plug_params plug_rsp;
+ };
+} __packed;
+
+/* fwserial_mgmt_packet codes */
+#define FWSC_RSP_OK 0x0000
+#define FWSC_RSP_NACK 0x8000
+#define FWSC_CODE_MASK 0x0fff
+
+#define FWSC_VIRT_CABLE_PLUG 1
+#define FWSC_VIRT_CABLE_UNPLUG 2
+#define FWSC_VIRT_CABLE_PLUG_RSP 3
+#define FWSC_VIRT_CABLE_UNPLUG_RSP 4
+
+/* 1 min. plug timeout -- suitable for userland authorization */
+#define VIRT_CABLE_PLUG_TIMEOUT (60 * HZ)
+
+struct stats {
+ unsigned xchars;
+ unsigned dropped;
+ unsigned tx_stall;
+ unsigned fifo_errs;
+ unsigned sent;
+ unsigned lost;
+ unsigned throttled;
+ unsigned watermark;
+ unsigned reads[DISTRIBUTION_MAX_INDEX + 1];
+ unsigned writes[DISTRIBUTION_MAX_INDEX + 1];
+ unsigned txns[DISTRIBUTION_MAX_INDEX + 1];
+ unsigned unthrottle[DISTRIBUTION_MAX_INDEX + 1];
+};
+
+struct fwconsole_ops {
+ void (*notify)(int code, void *data);
+ void (*stats)(struct stats *stats, void *data);
+ void (*proc_show)(struct seq_file *m, void *data);
+};
+
+/* codes for console ops notify */
+#define FWCON_NOTIFY_ATTACH 1
+#define FWCON_NOTIFY_DETACH 2
+
+struct buffered_rx {
+ struct list_head list;
+ size_t n;
+ unsigned char data[0];
+};
+
+/**
+ * fwtty_port: structure used to track/represent underlying tty_port
+ * @port: underlying tty_port
+ * @device: tty device
+ * @index: index into port_table for this particular port
+ * note: minor = index + FWSERIAL_TTY_START_MINOR
+ * @serial: back pointer to the containing fw_serial
+ * @rx_handler: bus address handler for unique addr region used by remotes
+ * to communicate with this port. Every port uses
+ * fwtty_port_handler() for per port transactions.
+ * @fwcon_ops: ops for attached fw_console (if any)
+ * @con_data: private data for fw_console
+ * @wait_tx: waitqueue for sleeping until writer/drain completes tx
+ * @emit_breaks: delayed work responsible for generating breaks when the
+ * break line status is active
+ * @cps : characters per second computed from the termios settings
+ * @break_last: timestamp in jiffies from last emit_breaks
+ * @hangup: work responsible for HUPing when carrier is dropped/lost
+ * @mstatus: loose virtualization of LSR/MSR
+ * bits 15..0 correspond to TIOCM_* bits
+ * bits 19..16 reserved for mctrl
+ * bit 20 OOB_TX_THROTTLE
+ * bits 23..21 reserved
+ * bits 31..24 correspond to UART_LSR_* bits
+ * @lock: spinlock for protecting concurrent access to fields below it
+ * @mctrl: loose virtualization of MCR
+ * bits 15..0 correspond to TIOCM_* bits
+ * bit 16 OOB_RX_THROTTLE
+ * bits 19..17 reserved
+ * bits 31..20 reserved for mstatus
+ * @drain: delayed work scheduled to ensure that writes are flushed.
+ * The work can race with the writer but concurrent sending is
+ * prevented with the IN_TX flag. Scheduled under lock to
+ * limit scheduling when fifo has just been drained.
+ * @push: work responsible for pushing buffered rx to the ldisc.
+ * rx can become buffered if the tty buffer is filled before the
+ * ldisc throttles the sender.
+ * @buf_list: list of buffered rx yet to be sent to ldisc
+ * @buffered: byte count of buffered rx
+ * @tx_fifo: fifo used to store & block-up writes for dma to remote
+ * @max_payload: max bytes transmissable per dma (based on peer's max_payload)
+ * @status_mask: UART_LSR_* bitmask significant to rx (based on termios)
+ * @ignore_mask: UART_LSR_* bitmask of states to ignore (also based on termios)
+ * @break_ctl: if set, port is 'sending break' to remote
+ * @write_only: self-explanatory
+ * @overrun: previous rx was lost (partially or completely)
+ * @loopback: if set, port is in loopback mode
+ * @flags: atomic bit flags
+ * bit 0: IN_TX - gate to allow only one cpu to send from the dma fifo
+ * at a time.
+ * bit 1: STOP_TX - force tx to exit while sending
+ * @peer: rcu-pointer to associated fwtty_peer (if attached)
+ * NULL if no peer attached
+ * @icount: predefined statistics reported by the TIOCGICOUNT ioctl
+ * @stats: additional statistics reported in /proc/tty/driver/firewire_serial
+ */
+struct fwtty_port {
+ struct tty_port port;
+ struct device *device;
+ unsigned index;
+ struct fw_serial *serial;
+ struct fw_address_handler rx_handler;
+
+ struct fwconsole_ops *fwcon_ops;
+ void *con_data;
+
+ wait_queue_head_t wait_tx;
+ struct delayed_work emit_breaks;
+ unsigned cps;
+ unsigned long break_last;
+
+ struct work_struct hangup;
+
+ unsigned mstatus;
+
+ spinlock_t lock;
+ unsigned mctrl;
+ struct delayed_work drain;
+ struct work_struct push;
+ struct list_head buf_list;
+ int buffered;
+ struct dma_fifo tx_fifo;
+ int max_payload;
+ unsigned status_mask;
+ unsigned ignore_mask;
+ unsigned break_ctl:1,
+ write_only:1,
+ overrun:1,
+ loopback:1;
+ unsigned long flags;
+
+ struct fwtty_peer *peer;
+
+ struct async_icount icount;
+ struct stats stats;
+};
+
+#define to_port(ptr, field) (container_of(ptr, struct fwtty_port, field))
+
+/* bit #s for flags field */
+#define IN_TX 0
+#define STOP_TX 1
+#define BUFFERING_RX 2
+
+/* bitmasks for special mctrl/mstatus bits */
+#define OOB_RX_THROTTLE 0x00010000
+#define MCTRL_RSRVD 0x000e0000
+#define OOB_TX_THROTTLE 0x00100000
+#define MSTATUS_RSRVD 0x00e00000
+
+#define MCTRL_MASK (TIOCM_DTR | TIOCM_RTS | TIOCM_OUT1 | TIOCM_OUT2 | \
+ TIOCM_LOOP | OOB_RX_THROTTLE | MCTRL_RSRVD)
+
+/* XXX even every 1/50th secs. may be unnecessarily accurate */
+/* delay in jiffies between brk emits */
+#define FREQ_BREAKS (HZ / 50)
+
+/* Ports are allocated in blocks of num_ports for each fw_card */
+#define MAX_CARD_PORTS 32 /* max # of ports per card */
+#define MAX_TOTAL_PORTS 64 /* max # of ports total */
+
+/* tuning parameters */
+#define FWTTY_PORT_TXFIFO_LEN 4096
+#define FWTTY_PORT_MAX_PEND_DMA 8 /* costs a cache line per pend */
+#define DRAIN_THRESHOLD 1024
+#define MAX_ASYNC_PAYLOAD 4096 /* ohci-defined limit */
+#define WRITER_MINIMUM 128
+/* TODO: how to set watermark to AR context size? see fwtty_rx() */
+#define HIGH_WATERMARK 32768 /* AR context is 32K */
+
+/*
+ * Size of bus addr region above 4GB used per port as the recv addr
+ * - must be at least as big as the MAX_ASYNC_PAYLOAD
+ */
+#define FWTTY_PORT_RXFIFO_LEN MAX_ASYNC_PAYLOAD
+
+/**
+ * fw_serial: aggregate used to associate tty ports with specific fw_card
+ * @card: fw_card associated with this fw_serial device (1:1 association)
+ * @kref: reference-counted multi-port management allows delayed destroy
+ * @self: local unit device as 'peer'. Not valid until local unit device
+ * is enumerated.
+ * @list: link for insertion into fwserial_list
+ * @peer_list: list of local & remote unit devices attached to this card
+ * @ports: fixed array of tty_ports provided by this serial device
+ */
+struct fw_serial {
+ struct fw_card *card;
+ struct kref kref;
+
+ struct fwtty_peer *self;
+
+ struct list_head list;
+ struct list_head peer_list;
+
+ struct fwtty_port *ports[MAX_CARD_PORTS];
+};
+
+#define to_serial(ptr, field) (container_of(ptr, struct fw_serial, field))
+
+#define TTY_DEV_NAME "fwtty" /* ttyFW was taken */
+static const char tty_dev_name[] = TTY_DEV_NAME;
+static const char loop_dev_name[] = "fwloop";
+extern bool limit_bw;
+
+struct tty_driver *fwtty_driver;
+
+#define driver_err(s, v...) pr_err(KBUILD_MODNAME ": " s, ##v)
+
+struct fwtty_port *fwtty_port_get(unsigned index);
+void fwtty_port_put(struct fwtty_port *port);
+
+static inline void fwtty_bind_console(struct fwtty_port *port,
+ struct fwconsole_ops *fwcon_ops,
+ void *data)
+{
+ port->con_data = data;
+ port->fwcon_ops = fwcon_ops;
+}
+
+/*
+ * Returns the max send async payload size in bytes based on the unit device
+ * link speed - if set to limit bandwidth to max 20%, use lookup table
+ */
+static inline int link_speed_to_max_payload(unsigned speed)
+{
+ static const int max_async[] = { 307, 614, 1229, 2458, 4916, 9832, };
+ BUILD_BUG_ON(ARRAY_SIZE(max_async) - 1 != SCODE_3200);
+
+ speed = clamp(speed, (unsigned) SCODE_100, (unsigned) SCODE_3200);
+ if (limit_bw)
+ return max_async[speed];
+ else
+ return 1 << (speed + 9);
+}
+
+#endif /* _FIREWIRE_FWSERIAL_H */
diff --git a/drivers/staging/gdm72xx/gdm_qos.c b/drivers/staging/gdm72xx/gdm_qos.c
index e26c6a8..1e63031 100644
--- a/drivers/staging/gdm72xx/gdm_qos.c
+++ b/drivers/staging/gdm72xx/gdm_qos.c
@@ -11,6 +11,8 @@
* GNU General Public License for more details.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/etherdevice.h>
#include <asm/byteorder.h>
@@ -24,15 +26,6 @@
#define B2H(x) __be16_to_cpu(x)
-#undef dprintk
-#define dprintk(fmt, args ...) printk(KERN_DEBUG "[QoS] " fmt, ## args)
-#undef wprintk
-#define wprintk(fmt, args ...) \
- printk(KERN_WARNING "[QoS WARNING] " fmt, ## args)
-#undef eprintk
-#define eprintk(fmt, args ...) printk(KERN_ERR "[QoS ERROR] " fmt, ## args)
-
-
#define MAX_FREE_LIST_CNT 32
static struct {
struct list_head head;
@@ -95,7 +88,7 @@
total_free++;
}
- dprintk("%s: total_free_cnt=%d\n", __func__, total_free);
+ pr_debug("%s: total_free_cnt=%d\n", __func__, total_free);
}
void gdm_qos_init(void *nic_ptr)
@@ -240,7 +233,9 @@
qcb->csr[i].qos_buf_count++;
if (!list_empty(&qcb->qos_list[i]))
- wprintk("QoS Index(%d) is piled!!\n", i);
+ netdev_warn(nic->netdev,
+ "Index(%d) is piled!!\n",
+ i);
}
}
}
@@ -280,7 +275,8 @@
entry = alloc_qos_entry();
entry->skb = skb;
entry->dev = dev;
- dprintk("qcb->qos_list_cnt=%d\n", qcb->qos_list_cnt);
+ netdev_dbg(dev, "qcb->qos_list_cnt=%d\n",
+ qcb->qos_list_cnt);
}
spin_lock_irqsave(&qcb->qos_lock, flags);
@@ -362,7 +358,7 @@
index = get_csr(qcb, SFID, 0);
if (index == -1) {
spin_unlock_irqrestore(&qcb->qos_lock, flags);
- eprintk("QoS ERROR: No SF\n");
+ netdev_err(nic->netdev, "QoS ERROR: No SF\n");
return;
}
qcb->csr[index].qos_buf_count = buf[(i*5)+10];
@@ -383,11 +379,12 @@
index = get_csr(qcb, SFID, 1);
if (index == -1) {
- eprintk("QoS ERROR: csr Update Error\n");
+ netdev_err(nic->netdev, "QoS ERROR: csr Update Error\n");
return;
}
- dprintk("QOS_ADD SFID = 0x%x, index=%d\n", SFID, index);
+ netdev_dbg(nic->netdev, "QOS_ADD SFID = 0x%x, index=%d\n",
+ SFID, index);
spin_lock_irqsave(&qcb->qos_lock, flags);
qcb->csr[index].SFID = SFID;
@@ -435,11 +432,13 @@
SFID += (buf[pos++]);
index = get_csr(qcb, SFID, 1);
if (index == -1) {
- eprintk("QoS ERROR: Wrong index(%d)\n", index);
+ netdev_err(nic->netdev, "QoS ERROR: Wrong index(%d)\n",
+ index);
return;
}
- dprintk("QOS_CHANGE_DEL SFID = 0x%x, index=%d\n", SFID, index);
+ netdev_dbg(nic->netdev, "QOS_CHANGE_DEL SFID = 0x%x, index=%d\n",
+ SFID, index);
INIT_LIST_HEAD(&free_list);
diff --git a/drivers/staging/gdm72xx/gdm_sdio.c b/drivers/staging/gdm72xx/gdm_sdio.c
index ca38d71..8b8ed98 100644
--- a/drivers/staging/gdm72xx/gdm_sdio.c
+++ b/drivers/staging/gdm72xx/gdm_sdio.c
@@ -157,7 +157,7 @@
tx->sdu_buf = kmalloc(SDU_TX_BUF_SIZE, GFP_KERNEL);
if (tx->sdu_buf == NULL) {
- printk(KERN_ERR "Failed to allocate SDU tx buffer.\n");
+ dev_err(&sdev->func->dev, "Failed to allocate SDU tx buffer.\n");
goto fail;
}
@@ -186,7 +186,7 @@
rx->rx_buf = kmalloc(RX_BUF_SIZE, GFP_KERNEL);
if (rx->rx_buf == NULL) {
- printk(KERN_ERR "Failed to allocate rx buffer.\n");
+ dev_err(&sdev->func->dev, "Failed to allocate rx buffer.\n");
goto fail;
}
@@ -246,7 +246,8 @@
ret = sdio_memcpy_toio(func, 0, data, n);
if (ret < 0) {
if (ret != -ENOMEDIUM)
- printk(KERN_ERR "gdmwms: %s error: ret = %d\n",
+ dev_err(&func->dev,
+ "gdmwms: %s error: ret = %d\n",
__func__, ret);
goto end_io;
}
@@ -259,7 +260,8 @@
ret = sdio_memcpy_toio(func, 0, data + n, remain);
if (ret < 0) {
if (ret != -ENOMEDIUM)
- printk(KERN_ERR "gdmwms: %s error: ret = %d\n",
+ dev_err(&func->dev,
+ "gdmwms: %s error: ret = %d\n",
__func__, ret);
goto end_io;
}
@@ -522,13 +524,14 @@
ret = sdio_memcpy_fromio(func, hdr, 0x0, TYPE_A_LOOKAHEAD_SIZE);
if (ret) {
- printk(KERN_ERR "Cannot read from function %d\n", func->num);
+ dev_err(&func->dev,
+ "Cannot read from function %d\n", func->num);
goto done;
}
len = (hdr[2] << 16) | (hdr[1] << 8) | hdr[0];
if (len > (RX_BUF_SIZE - TYPE_A_HEADER_SIZE)) {
- printk(KERN_ERR "Too big Type-A size: %d\n", len);
+ dev_err(&func->dev, "Too big Type-A size: %d\n", len);
goto done;
}
@@ -562,8 +565,8 @@
n = blocks * func->cur_blksize;
ret = sdio_memcpy_fromio(func, buf, 0x0, n);
if (ret) {
- printk(KERN_ERR "Cannot read from function %d\n",
- func->num);
+ dev_err(&func->dev,
+ "Cannot read from function %d\n", func->num);
goto done;
}
buf += n;
@@ -573,8 +576,8 @@
if (remain) {
ret = sdio_memcpy_fromio(func, buf, 0x0, remain);
if (ret) {
- printk(KERN_ERR "Cannot read from function %d\n",
- func->num);
+ dev_err(&func->dev,
+ "Cannot read from function %d\n", func->num);
goto done;
}
}
@@ -637,9 +640,9 @@
struct phy_dev *phy_dev = NULL;
struct sdiowm_dev *sdev = NULL;
- printk(KERN_INFO "Found GDM SDIO VID = 0x%04x PID = 0x%04x...\n",
- func->vendor, func->device);
- printk(KERN_INFO "GCT WiMax driver version %s\n", DRIVER_VERSION);
+ dev_info(&func->dev, "Found GDM SDIO VID = 0x%04x PID = 0x%04x...\n",
+ func->vendor, func->device);
+ dev_info(&func->dev, "GCT WiMax driver version %s\n", DRIVER_VERSION);
sdio_claim_host(func);
sdio_enable_func(func);
diff --git a/drivers/staging/gdm72xx/gdm_usb.c b/drivers/staging/gdm72xx/gdm_usb.c
index 0c9e895..bce6104 100644
--- a/drivers/staging/gdm72xx/gdm_usb.c
+++ b/drivers/staging/gdm72xx/gdm_usb.c
@@ -186,6 +186,7 @@
struct rx_cxt *rx = &udev->rx;
struct usb_tx *t;
struct usb_rx *r;
+ unsigned long flags;
INIT_LIST_HEAD(&tx->free_list);
INIT_LIST_HEAD(&tx->sdu_list);
@@ -200,14 +201,17 @@
spin_lock_init(&tx->lock);
spin_lock_init(&rx->lock);
+ spin_lock_irqsave(&tx->lock, flags);
for (i = 0; i < MAX_NR_SDU_BUF; i++) {
t = alloc_tx_struct(tx);
if (t == NULL) {
+ spin_unlock_irqrestore(&tx->lock, flags);
ret = -ENOMEM;
goto fail;
}
list_add(&t->list, &tx->free_list);
}
+ spin_unlock_irqrestore(&tx->lock, flags);
r = alloc_rx_struct(rx);
if (r == NULL) {
@@ -215,7 +219,9 @@
goto fail;
}
+ spin_lock_irqsave(&rx->lock, flags);
list_add(&r->list, &rx->free_list);
+ spin_unlock_irqrestore(&rx->lock, flags);
return ret;
fail:
@@ -229,6 +235,9 @@
struct rx_cxt *rx = &udev->rx;
struct usb_tx *t, *t_next;
struct usb_rx *r, *r_next;
+ unsigned long flags;
+
+ spin_lock_irqsave(&tx->lock, flags);
list_for_each_entry_safe(t, t_next, &tx->sdu_list, list) {
list_del(&t->list);
@@ -245,6 +254,10 @@
free_tx_struct(t);
}
+ spin_unlock_irqrestore(&tx->lock, flags);
+
+ spin_lock_irqsave(&rx->lock, flags);
+
list_for_each_entry_safe(r, r_next, &rx->free_list, list) {
list_del(&r->list);
free_rx_struct(r);
@@ -254,6 +267,8 @@
list_del(&r->list);
free_rx_struct(r);
}
+
+ spin_unlock_irqrestore(&rx->lock, flags);
}
static void __gdm_usb_send_complete(struct urb *urb)
@@ -303,9 +318,12 @@
u8 *pkt = data;
u16 cmd_evt;
unsigned long flags;
+#ifdef CONFIG_WIMAX_GDM72XX_K_MODE
+ unsigned long flags2;
+#endif /* CONFIG_WIMAX_GDM72XX_K_MODE */
if (!udev->usbdev) {
- printk(KERN_ERR "%s: No such device\n", __func__);
+ dev_err(&usbdev->dev, "%s: No such device\n", __func__);
return -ENODEV;
}
@@ -371,13 +389,16 @@
rx = &udev->rx;
+ spin_lock_irqsave(&rx->lock, flags2);
list_for_each_entry(r, &rx->used_list, list)
usb_unlink_urb(r->urb);
+ spin_unlock_irqrestore(&rx->lock, flags2);
+
udev->bw_switch = 1;
- spin_lock(&k_lock);
+ spin_lock_irqsave(&k_lock, flags2);
list_add_tail(&udev->list, &k_list);
- spin_unlock(&k_lock);
+ spin_unlock_irqrestore(&k_lock, flags2);
wake_up(&k_wait);
}
@@ -416,7 +437,7 @@
struct tx_cxt *tx = &udev->tx;
struct usb_tx *t;
u16 cmd_evt;
- unsigned long flags;
+ unsigned long flags, flags2;
#ifdef CONFIG_WIMAX_GDM72XX_USB_PM
struct usb_device *dev = urb->dev;
@@ -462,9 +483,9 @@
if (!urb->status && r->callback)
r->callback(r->cb_data, r->buf, urb->actual_length);
- spin_lock(&rx->lock);
+ spin_lock_irqsave(&rx->lock, flags2);
put_rx_struct(rx, r);
- spin_unlock(&rx->lock);
+ spin_unlock_irqrestore(&rx->lock, flags2);
spin_unlock_irqrestore(&tx->lock, flags);
@@ -484,7 +505,7 @@
unsigned long flags;
if (!udev->usbdev) {
- printk(KERN_ERR "%s: No such device\n", __func__);
+ dev_err(&usbdev->dev, "%s: No such device\n", __func__);
return -ENODEV;
}
@@ -559,9 +580,9 @@
idProduct = L2H(usbdev->descriptor.idProduct);
bcdDevice = L2H(usbdev->descriptor.bcdDevice);
- printk(KERN_INFO "Found GDM USB VID = 0x%04x PID = 0x%04x...\n",
- idVendor, idProduct);
- printk(KERN_INFO "GCT WiMax driver version %s\n", DRIVER_VERSION);
+ dev_info(&intf->dev, "Found GDM USB VID = 0x%04x PID = 0x%04x...\n",
+ idVendor, idProduct);
+ dev_info(&intf->dev, "GCT WiMax driver version %s\n", DRIVER_VERSION);
if (idProduct == EMERGENCY_PID) {
@@ -619,8 +640,9 @@
if (ret) {
kfree(phy_dev);
kfree(udev);
+ } else {
+ usb_set_intfdata(intf, phy_dev);
}
- usb_set_intfdata(intf, phy_dev);
return ret;
}
@@ -660,14 +682,22 @@
struct usbwm_dev *udev;
struct rx_cxt *rx;
struct usb_rx *r;
+ unsigned long flags;
phy_dev = usb_get_intfdata(intf);
+ if (!phy_dev)
+ return 0;
+
udev = phy_dev->priv_dev;
rx = &udev->rx;
+ spin_lock_irqsave(&rx->lock, flags);
+
list_for_each_entry(r, &rx->used_list, list)
usb_unlink_urb(r->urb);
+ spin_unlock_irqrestore(&rx->lock, flags);
+
return 0;
}
@@ -677,14 +707,22 @@
struct usbwm_dev *udev;
struct rx_cxt *rx;
struct usb_rx *r;
+ unsigned long flags;
phy_dev = usb_get_intfdata(intf);
+ if (!phy_dev)
+ return 0;
+
udev = phy_dev->priv_dev;
rx = &udev->rx;
+ spin_lock_irqsave(&rx->lock, flags);
+
list_for_each_entry(r, &rx->used_list, list)
usb_submit_urb(r->urb, GFP_ATOMIC);
+ spin_unlock_irqrestore(&rx->lock, flags);
+
return 0;
}
@@ -719,9 +757,13 @@
while (jiffies < expire)
schedule_timeout(K_WAIT_TIME);
+ spin_lock_irqsave(&rx->lock, flags);
+
list_for_each_entry(r, &rx->used_list, list)
usb_submit_urb(r->urb, GFP_ATOMIC);
+ spin_unlock_irqrestore(&rx->lock, flags);
+
spin_lock_irqsave(&tx->lock, flags);
list_for_each_entry_safe(t, temp, &tx->pending_list,
diff --git a/drivers/staging/gdm72xx/gdm_wimax.c b/drivers/staging/gdm72xx/gdm_wimax.c
index 6cb8107..41efbee 100644
--- a/drivers/staging/gdm72xx/gdm_wimax.c
+++ b/drivers/staging/gdm72xx/gdm_wimax.c
@@ -11,6 +11,8 @@
* GNU General Public License for more details.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/etherdevice.h>
#include <asm/byteorder.h>
#include <linux/ip.h>
@@ -166,21 +168,13 @@
get_ip_protocol_name(ip_protocol),
get_port_name(port));
- #if 1
if (!(data[0] == 0xff && data[1] == 0xff)) {
if (protocol == ETH_P_IP) {
- printk(KERN_DEBUG " src=%u.%u.%u.%u\n",
- NIPQUAD(ih->saddr));
+ printk(KERN_DEBUG " src=%pI4\n", &ih->saddr);
} else if (protocol == ETH_P_IPV6) {
- #ifdef NIP6
- printk(KERN_DEBUG " src=%x:%x:%x:%x:%x:%x:%x:%x\n",
- NIP6(ih->saddr));
- #else
printk(KERN_DEBUG " src=%pI6\n", &ih->saddr);
- #endif
}
}
- #endif
#if (DUMP_PACKET & DUMP_SDU_ALL)
printk_hex(data, len);
@@ -271,7 +265,7 @@
return 0;
}
- printk(KERN_ERR "Creating WiMax Event netlink is failed\n");
+ pr_err("Creating WiMax Event netlink is failed\n");
return -1;
}
@@ -367,7 +361,7 @@
e = get_event_entry();
if (!e) {
- printk(KERN_ERR "%s: No memory for event\n", __func__);
+ netdev_err(dev, "%s: No memory for event\n", __func__);
spin_unlock_irqrestore(&wm_event.evt_lock, flags);
return -ENOMEM;
}
@@ -433,10 +427,10 @@
#if !defined(LOOPBACK_TEST)
if (!fsm)
- printk(KERN_ERR "ASSERTION ERROR: fsm is NULL!!\n");
+ netdev_err(dev, "ASSERTION ERROR: fsm is NULL!!\n");
else if (fsm->m_status != M_CONNECTED) {
- printk(KERN_EMERG "ASSERTION ERROR: Device is NOT ready. status=%d\n",
- fsm->m_status);
+ netdev_emerg(dev, "ASSERTION ERROR: Device is NOT ready. status=%d\n",
+ fsm->m_status);
kfree_skb(skb);
return 0;
}
@@ -622,9 +616,8 @@
case SIOCG_DATA:
case SIOCS_DATA:
if (req->data_id >= SIOC_DATA_MAX) {
- printk(KERN_ERR
- "%s error: data-index(%d) is invalid!!\n",
- __func__, req->data_id);
+ netdev_err(dev, "%s error: data-index(%d) is invalid!!\n",
+ __func__, req->data_id);
return -EOPNOTSUPP;
}
if (req->cmd == SIOCG_DATA) {
@@ -646,7 +639,7 @@
}
break;
default:
- printk(KERN_ERR "%s: %x unknown ioctl\n", __func__, cmd);
+ netdev_err(dev, "%s: %x unknown ioctl\n", __func__, cmd);
return -EOPNOTSUPP;
}
@@ -692,7 +685,7 @@
hci->length = H2B(len);
gdm_wimax_send(nic, hci, HCI_HEADER_SIZE+len);
- printk(KERN_INFO "GDM WiMax Set CAPABILITY: 0x%08X\n", DB2H(val));
+ netdev_info(dev, "GDM WiMax Set CAPABILITY: 0x%08X\n", DB2H(val));
}
static int gdm_wimax_hci_get_tlv(u8 *buf, u8 *T, u16 *L, u8 **V)
@@ -726,28 +719,28 @@
cmd_len = B2H(*(u16 *)&buf[2]);
if (len < cmd_len + HCI_HEADER_SIZE) {
- printk(KERN_ERR "%s: invalid length [%d/%d]\n", __func__,
- cmd_len + HCI_HEADER_SIZE, len);
+ netdev_err(dev, "%s: invalid length [%d/%d]\n", __func__,
+ cmd_len + HCI_HEADER_SIZE, len);
return -1;
}
if (cmd_evt == WIMAX_GET_INFO_RESULT) {
if (cmd_len < 2) {
- printk(KERN_ERR "%s: len is too short [%x/%d]\n",
- __func__, cmd_evt, len);
+ netdev_err(dev, "%s: len is too short [%x/%d]\n",
+ __func__, cmd_evt, len);
return -1;
}
pos += gdm_wimax_hci_get_tlv(&buf[pos], &T, &L, &V);
if (T == TLV_T(T_MAC_ADDRESS)) {
if (L != dev->addr_len) {
- printk(KERN_ERR
- "%s Invalid inofrmation result T/L "
- "[%x/%d]\n", __func__, T, L);
+ netdev_err(dev,
+ "%s Invalid inofrmation result T/L [%x/%d]\n",
+ __func__, T, L);
return -1;
}
- printk(KERN_INFO "MAC change [%pM]->[%pM]\n",
- dev->dev_addr, V);
+ netdev_info(dev, "MAC change [%pM]->[%pM]\n",
+ dev->dev_addr, V);
memcpy(dev->dev_addr, V, dev->addr_len);
return 1;
}
@@ -769,7 +762,7 @@
skb = dev_alloc_skb(len + 2);
if (!skb) {
- printk(KERN_ERR "%s: dev_alloc_skb failed!\n", __func__);
+ netdev_err(dev, "%s: dev_alloc_skb failed!\n", __func__);
return;
}
skb_reserve(skb, 2);
@@ -784,7 +777,7 @@
ret = in_interrupt() ? netif_rx(skb) : netif_rx_ni(skb);
if (ret == NET_RX_DROP)
- printk(KERN_ERR "%s skb dropped\n", __func__);
+ netdev_err(dev, "%s skb dropped\n", __func__);
}
static void gdm_wimax_transmit_aggr_pkt(struct net_device *dev, char *buf,
@@ -799,8 +792,8 @@
hci = (struct hci_s *) buf;
if (B2H(hci->cmd_evt) != WIMAX_RX_SDU) {
- printk(KERN_ERR "Wrong cmd_evt(0x%04X)\n",
- B2H(hci->cmd_evt));
+ netdev_err(dev, "Wrong cmd_evt(0x%04X)\n",
+ B2H(hci->cmd_evt));
break;
}
@@ -834,8 +827,8 @@
if (len < cmd_len + HCI_HEADER_SIZE) {
if (len)
- printk(KERN_ERR "%s: invalid length [%d/%d]\n",
- __func__, cmd_len + HCI_HEADER_SIZE, len);
+ netdev_err(dev, "%s: invalid length [%d/%d]\n",
+ __func__, cmd_len + HCI_HEADER_SIZE, len);
return;
}
@@ -915,7 +908,8 @@
gdm_wimax_rcv_with_cb(nic, rx_complete, nic);
else {
if (ret < 0)
- printk(KERN_ERR "get_prepared_info failed(%d)\n", ret);
+ netdev_err(nic->netdev,
+ "get_prepared_info failed(%d)\n", ret);
gdm_wimax_rcv_with_cb(nic, prepare_rx_complete, nic);
#if 0
/* Re-prepare WiMax device */
@@ -949,7 +943,7 @@
"wm%d", ether_setup);
if (dev == NULL) {
- printk(KERN_ERR "alloc_etherdev failed\n");
+ pr_err("alloc_etherdev failed\n");
return -ENOMEM;
}
@@ -969,7 +963,7 @@
/* event socket init */
ret = gdm_wimax_event_init();
if (ret < 0) {
- printk(KERN_ERR "Cannot create event.\n");
+ pr_err("Cannot create event.\n");
goto cleanup;
}
@@ -996,7 +990,7 @@
return 0;
cleanup:
- printk(KERN_ERR "register_netdev failed\n");
+ pr_err("register_netdev failed\n");
free_netdev(dev);
return ret;
}
diff --git a/drivers/staging/gdm72xx/netlink_k.c b/drivers/staging/gdm72xx/netlink_k.c
index 20d0aec..52c25ba 100644
--- a/drivers/staging/gdm72xx/netlink_k.c
+++ b/drivers/staging/gdm72xx/netlink_k.c
@@ -11,6 +11,8 @@
* GNU General Public License for more details.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/etherdevice.h>
#include <linux/netlink.h>
@@ -54,8 +56,8 @@
if (skb->len < nlh->nlmsg_len ||
nlh->nlmsg_len > ND_MAX_MSG_LEN) {
- printk(KERN_ERR "Invalid length (%d,%d)\n", skb->len,
- nlh->nlmsg_len);
+ netdev_err(skb->dev, "Invalid length (%d,%d)\n",
+ skb->len, nlh->nlmsg_len);
return;
}
@@ -69,10 +71,11 @@
rcv_cb(dev, nlh->nlmsg_type, msg, mlen);
dev_put(dev);
} else
- printk(KERN_ERR "dev_get_by_index(%d) "
- "is not found.\n", ifindex);
+ netdev_err(skb->dev,
+ "dev_get_by_index(%d) is not found.\n",
+ ifindex);
} else
- printk(KERN_ERR "Unregistered Callback\n");
+ netdev_err(skb->dev, "Unregistered Callback\n");
}
}
@@ -116,14 +119,14 @@
int ret = 0;
if (group > ND_MAX_GROUP) {
- printk(KERN_ERR "Group %d is invalied.\n", group);
- printk(KERN_ERR "Valid group is 0 ~ %d.\n", ND_MAX_GROUP);
+ pr_err("Group %d is invalied.\n", group);
+ pr_err("Valid group is 0 ~ %d.\n", ND_MAX_GROUP);
return -EINVAL;
}
skb = alloc_skb(NLMSG_SPACE(len), GFP_ATOMIC);
if (!skb) {
- printk(KERN_ERR "netlink_broadcast ret=%d\n", ret);
+ pr_err("netlink_broadcast ret=%d\n", ret);
return -ENOMEM;
}
@@ -144,8 +147,8 @@
return len;
else {
if (ret != -ESRCH) {
- printk(KERN_ERR "netlink_broadcast g=%d, t=%d, l=%d, r=%d\n",
- group, type, len, ret);
+ pr_err("netlink_broadcast g=%d, t=%d, l=%d, r=%d\n",
+ group, type, len, ret);
}
ret = 0;
}
diff --git a/drivers/staging/gdm72xx/sdio_boot.c b/drivers/staging/gdm72xx/sdio_boot.c
index 65624bc..6291829 100644
--- a/drivers/staging/gdm72xx/sdio_boot.c
+++ b/drivers/staging/gdm72xx/sdio_boot.c
@@ -24,15 +24,18 @@
#include <linux/mmc/card.h>
#include <linux/mmc/sdio_func.h>
+#include <linux/firmware.h>
+
#include "gdm_sdio.h"
#define TYPE_A_HEADER_SIZE 4
#define TYPE_A_LOOKAHEAD_SIZE 16
-#define YMEM0_SIZE 0x8000 /* 32kbytes */
+#define YMEM0_SIZE 0x8000 /* 32kbytes */
#define DOWNLOAD_SIZE (YMEM0_SIZE - TYPE_A_HEADER_SIZE)
-#define KRN_PATH "/lib/firmware/gdm72xx/gdmskrn.bin"
-#define RFS_PATH "/lib/firmware/gdm72xx/gdmsrfs.bin"
+#define FW_DIR "gdm72xx/"
+#define FW_KRN "gdmskrn.bin"
+#define FW_RFS "gdmsrfs.bin"
static u8 *tx_buf;
@@ -52,106 +55,109 @@
return 0;
}
-static int download_image(struct sdio_func *func, char *img_name)
+static int download_image(struct sdio_func *func, const char *img_name)
{
- int ret = 0, len, size, pno;
- struct file *filp = NULL;
- struct inode *inode = NULL;
+ int ret = 0, len, pno;
u8 *buf = tx_buf;
loff_t pos = 0;
+ int img_len;
+ const struct firmware *firm;
- filp = filp_open(img_name, O_RDONLY | O_LARGEFILE, 0);
- if (IS_ERR(filp)) {
- printk(KERN_ERR "Can't find %s.\n", img_name);
- return -ENOENT;
+ ret = request_firmware(&firm, img_name, &func->dev);
+ if (ret < 0) {
+ dev_err(&func->dev,
+ "requesting firmware %s failed with error %d\n",
+ img_name, ret);
+ return ret;
}
- inode = filp->f_dentry->d_inode;
- if (!S_ISREG(inode->i_mode)) {
- printk(KERN_ERR "Invalid file type: %s\n", img_name);
- ret = -EINVAL;
- goto out;
+ buf = kmalloc(DOWNLOAD_SIZE + TYPE_A_HEADER_SIZE, GFP_KERNEL);
+ if (buf == NULL) {
+ dev_err(&func->dev, "Error: kmalloc\n");
+ return -ENOMEM;
}
- size = i_size_read(inode->i_mapping->host);
- if (size <= 0) {
- printk(KERN_ERR "Unable to find file size: %s\n", img_name);
- ret = size;
+ img_len = firm->size;
+
+ if (img_len <= 0) {
+ ret = -1;
goto out;
}
pno = 0;
- while ((len = filp->f_op->read(filp, buf + TYPE_A_HEADER_SIZE,
- DOWNLOAD_SIZE, &pos))) {
- if (len < 0) {
- ret = -1;
- goto out;
+ while (img_len > 0) {
+ if (img_len > DOWNLOAD_SIZE) {
+ len = DOWNLOAD_SIZE;
+ buf[3] = 0;
+ } else {
+ len = img_len; /* the last packet */
+ buf[3] = 2;
}
buf[0] = len & 0xff;
buf[1] = (len >> 8) & 0xff;
buf[2] = (len >> 16) & 0xff;
- if (pos >= size) /* The last packet */
- buf[3] = 2;
- else
- buf[3] = 0;
-
+ memcpy(buf+TYPE_A_HEADER_SIZE, firm->data + pos, len);
ret = sdio_memcpy_toio(func, 0, buf, len + TYPE_A_HEADER_SIZE);
if (ret < 0) {
- printk(KERN_ERR "gdmwm: send image error: "
- "packet number = %d ret = %d\n", pno, ret);
+ dev_err(&func->dev,
+ "send image error: packet number = %d ret = %d\n",
+ pno, ret);
goto out;
}
+
if (buf[3] == 2) /* The last packet */
break;
if (!ack_ready(func)) {
ret = -EIO;
- printk(KERN_ERR "gdmwm: Ack is not ready.\n");
+ dev_err(&func->dev, "Ack is not ready.\n");
goto out;
}
ret = sdio_memcpy_fromio(func, buf, 0, TYPE_A_LOOKAHEAD_SIZE);
if (ret < 0) {
- printk(KERN_ERR "gdmwm: receive ack error: "
- "packet number = %d ret = %d\n", pno, ret);
+ dev_err(&func->dev,
+ "receive ack error: packet number = %d ret = %d\n",
+ pno, ret);
goto out;
}
sdio_writeb(func, 0x01, 0x13, &ret);
sdio_writeb(func, 0x00, 0x10, &ret); /* PCRRT */
+ img_len -= DOWNLOAD_SIZE;
+ pos += DOWNLOAD_SIZE;
pno++;
}
+
out:
- filp_close(filp, NULL);
+ kfree(buf);
return ret;
}
int sdio_boot(struct sdio_func *func)
{
- static mm_segment_t fs;
int ret;
+ const char *krn_name = FW_DIR FW_KRN;
+ const char *rfs_name = FW_DIR FW_RFS;
tx_buf = kmalloc(YMEM0_SIZE, GFP_KERNEL);
if (tx_buf == NULL) {
- printk(KERN_ERR "Error: kmalloc: %s %d\n", __func__, __LINE__);
+ dev_err(&func->dev, "Error: kmalloc: %s %d\n",
+ __func__, __LINE__);
return -ENOMEM;
}
- fs = get_fs();
- set_fs(get_ds());
-
- ret = download_image(func, KRN_PATH);
+ ret = download_image(func, krn_name);
if (ret)
goto restore_fs;
- printk(KERN_INFO "GCT: Kernel download success.\n");
+ dev_info(&func->dev, "GCT: Kernel download success.\n");
- ret = download_image(func, RFS_PATH);
+ ret = download_image(func, rfs_name);
if (ret)
goto restore_fs;
- printk(KERN_INFO "GCT: Filesystem download success.\n");
+ dev_info(&func->dev, "GCT: Filesystem download success.\n");
restore_fs:
- set_fs(fs);
kfree(tx_buf);
return ret;
}
diff --git a/drivers/staging/gdm72xx/usb_boot.c b/drivers/staging/gdm72xx/usb_boot.c
index 0787188..3e2103a 100644
--- a/drivers/staging/gdm72xx/usb_boot.c
+++ b/drivers/staging/gdm72xx/usb_boot.c
@@ -82,7 +82,8 @@
&actual, 1000);
if (ret < 0) {
- printk(KERN_ERR "Error : usb_bulk_msg ( result = %d )\n", ret);
+ dev_err(&usbdev->dev, "Error : usb_bulk_msg ( result = %d )\n",
+ ret);
return ret;
}
return 0;
@@ -97,8 +98,8 @@
&actual, 5000);
if (ret < 0) {
- printk(KERN_ERR "Error : usb_bulk_msg(recv) ( result = %d )\n",
- ret);
+ dev_err(&usbdev->dev,
+ "Error : usb_bulk_msg(recv) ( result = %d )\n", ret);
return ret;
}
return 0;
@@ -150,20 +151,20 @@
ret = request_firmware(&firm, img_name, &usbdev->dev);
if (ret < 0) {
- printk(KERN_ERR
- "requesting firmware %s failed with error %d\n",
+ dev_err(&usbdev->dev,
+ "requesting firmware %s failed with error %d\n",
img_name, ret);
return ret;
}
tx_buf = kmalloc(DOWNLOAD_SIZE, GFP_KERNEL);
if (tx_buf == NULL) {
- printk(KERN_ERR "Error: kmalloc\n");
+ dev_err(&usbdev->dev, "Error: kmalloc\n");
return -ENOMEM;
}
if (firm->size < sizeof(hdr)) {
- printk(KERN_ERR "gdmwm: Cannot read the image info.\n");
+ dev_err(&usbdev->dev, "Cannot read the image info.\n");
ret = -EIO;
goto out;
}
@@ -172,23 +173,22 @@
array_le32_to_cpu((u32 *)&hdr, 19);
#if 0
if (hdr.magic_code != 0x10767fff) {
- printk(KERN_ERR "gdmwm: Invalid magic code 0x%08x\n",
+ dev_err(&usbdev->dev, "Invalid magic code 0x%08x\n",
hdr.magic_code);
ret = -EINVAL;
goto out;
}
#endif
if (hdr.count > MAX_IMG_CNT) {
- printk(KERN_ERR "gdmwm: Too many images. %d\n", hdr.count);
+ dev_err(&usbdev->dev, "Too many images. %d\n", hdr.count);
ret = -EINVAL;
goto out;
}
for (i = 0; i < hdr.count; i++) {
if (hdr.offset[i] > hdr.len) {
- printk(KERN_ERR "gdmwm: Invalid offset. "
- "Entry = %d Offset = 0x%08x "
- "Image length = 0x%08x\n",
+ dev_err(&usbdev->dev,
+ "Invalid offset. Entry = %d Offset = 0x%08x Image length = 0x%08x\n",
i, hdr.offset[i], hdr.len);
ret = -EINVAL;
goto out;
@@ -196,7 +196,7 @@
pos = hdr.offset[i];
if (firm->size < sizeof(fw_info) + pos) {
- printk(KERN_ERR "gdmwm: Cannot read the FW info.\n");
+ dev_err(&usbdev->dev, "Cannot read the FW info.\n");
ret = -EIO;
goto out;
}
@@ -205,7 +205,7 @@
array_le32_to_cpu((u32 *)&fw_info, 8);
#if 0
if ((fw_info.id & 0xfffff000) != 0x10767000) {
- printk(KERN_ERR "gdmwm: Invalid FW id. 0x%08x\n",
+ dev_err(&usbdev->dev, "Invalid FW id. 0x%08x\n",
fw_info.id);
ret = -EIO;
goto out;
@@ -217,7 +217,7 @@
pos = hdr.offset[i] + fw_info.kernel_offset;
if (firm->size < fw_info.kernel_len + pos) {
- printk(KERN_ERR "gdmwm: Kernel FW is too small.\n");
+ dev_err(&usbdev->dev, "Kernel FW is too small.\n");
goto out;
}
@@ -225,24 +225,25 @@
fw_info.kernel_len, DN_KERNEL_MAGIC_NUMBER);
if (ret < 0)
goto out;
- printk(KERN_INFO "GCT: Kernel download success.\n");
+ dev_info(&usbdev->dev, "GCT: Kernel download success.\n");
pos = hdr.offset[i] + fw_info.rootfs_offset;
if (firm->size < fw_info.rootfs_len + pos) {
- printk(KERN_ERR "gdmwm: Filesystem FW is too small.\n");
+ dev_err(&usbdev->dev, "Filesystem FW is too small.\n");
goto out;
}
ret = download_image(usbdev, firm, pos, fw_info.rootfs_len,
DN_ROOTFS_MAGIC_NUMBER);
if (ret < 0)
goto out;
- printk(KERN_INFO "GCT: Filesystem download success.\n");
+ dev_info(&usbdev->dev, "GCT: Filesystem download success.\n");
break;
}
if (i == hdr.count) {
- printk(KERN_ERR "Firmware for gsk%x is not installed.\n", pid);
+ dev_err(&usbdev->dev, "Firmware for gsk%x is not installed.\n",
+ pid);
ret = -EINVAL;
}
out:
@@ -293,15 +294,15 @@
ret = request_firmware(&firm, img_name, &usbdev->dev);
if (ret < 0) {
- printk(KERN_ERR
- "requesting firmware %s failed with error %d\n",
+ dev_err(&usbdev->dev,
+ "requesting firmware %s failed with error %d\n",
img_name, ret);
return ret;
}
buf = kmalloc(DOWNLOAD_CHUCK + pad_size, GFP_KERNEL);
if (buf == NULL) {
- printk(KERN_ERR "Error: kmalloc\n");
+ dev_err(&usbdev->dev, "Error: kmalloc\n");
return -ENOMEM;
}
@@ -366,12 +367,12 @@
ret = em_download_image(usbdev, kern_name, KERNEL_TYPE_STRING);
if (ret < 0)
return ret;
- printk(KERN_INFO "GCT Emergency: Kernel download success.\n");
+ dev_err(&usbdev->dev, "GCT Emergency: Kernel download success.\n");
ret = em_download_image(usbdev, fs_name, FS_TYPE_STRING);
if (ret < 0)
return ret;
- printk(KERN_INFO "GCT Emergency: Filesystem download success.\n");
+ dev_info(&usbdev->dev, "GCT Emergency: Filesystem download success.\n");
ret = em_fw_reset(usbdev);
diff --git a/drivers/staging/iio/accel/Kconfig b/drivers/staging/iio/accel/Kconfig
index 5ab7167..2b54430 100644
--- a/drivers/staging/iio/accel/Kconfig
+++ b/drivers/staging/iio/accel/Kconfig
@@ -6,8 +6,8 @@
config ADIS16201
tristate "Analog Devices ADIS16201 Dual-Axis Digital Inclinometer and Accelerometer"
depends on SPI
- select IIO_TRIGGER if IIO_BUFFER
- select IIO_SW_RING if IIO_BUFFER
+ select IIO_ADIS_LIB
+ select IIO_ADIS_LIB_BUFFER if IIO_BUFFER
help
Say yes here to build support for Analog Devices adis16201 dual-axis
digital inclinometer and accelerometer.
@@ -15,8 +15,8 @@
config ADIS16203
tristate "Analog Devices ADIS16203 Programmable 360 Degrees Inclinometer"
depends on SPI
- select IIO_TRIGGER if IIO_BUFFER
- select IIO_SW_RING if IIO_BUFFER
+ select IIO_ADIS_LIB
+ select IIO_ADIS_LIB_BUFFER if IIO_BUFFER
help
Say yes here to build support for Analog Devices adis16203 Programmable
360 Degrees Inclinometer.
@@ -24,8 +24,8 @@
config ADIS16204
tristate "Analog Devices ADIS16204 Programmable High-g Digital Impact Sensor and Recorder"
depends on SPI
- select IIO_TRIGGER if IIO_BUFFER
- select IIO_SW_RING if IIO_BUFFER
+ select IIO_ADIS_LIB
+ select IIO_ADIS_LIB_BUFFER if IIO_BUFFER
help
Say yes here to build support for Analog Devices adis16204 Programmable
High-g Digital Impact Sensor and Recorder.
@@ -33,8 +33,8 @@
config ADIS16209
tristate "Analog Devices ADIS16209 Dual-Axis Digital Inclinometer and Accelerometer"
depends on SPI
- select IIO_TRIGGER if IIO_BUFFER
- select IIO_SW_RING if IIO_BUFFER
+ select IIO_ADIS_LIB
+ select IIO_ADIS_LIB_BUFFER if IIO_BUFFER
help
Say yes here to build support for Analog Devices adis16209 dual-axis digital inclinometer
and accelerometer.
@@ -42,6 +42,7 @@
config ADIS16220
tristate "Analog Devices ADIS16220 Programmable Digital Vibration Sensor"
depends on SPI
+ select IIO_ADIS_LIB
help
Say yes here to build support for Analog Devices adis16220 programmable
digital vibration sensor.
@@ -49,8 +50,8 @@
config ADIS16240
tristate "Analog Devices ADIS16240 Programmable Impact Sensor and Recorder"
depends on SPI
- select IIO_TRIGGER if IIO_BUFFER
- select IIO_SW_RING if IIO_BUFFER
+ select IIO_ADIS_LIB
+ select IIO_ADIS_LIB_BUFFER if IIO_BUFFER
help
Say yes here to build support for Analog Devices adis16240 programmable
impact Sensor and recorder.
diff --git a/drivers/staging/iio/accel/Makefile b/drivers/staging/iio/accel/Makefile
index 95c6666..8e7ee03 100644
--- a/drivers/staging/iio/accel/Makefile
+++ b/drivers/staging/iio/accel/Makefile
@@ -3,26 +3,21 @@
#
adis16201-y := adis16201_core.o
-adis16201-$(CONFIG_IIO_BUFFER) += adis16201_ring.o adis16201_trigger.o
obj-$(CONFIG_ADIS16201) += adis16201.o
adis16203-y := adis16203_core.o
-adis16203-$(CONFIG_IIO_BUFFER) += adis16203_ring.o adis16203_trigger.o
obj-$(CONFIG_ADIS16203) += adis16203.o
adis16204-y := adis16204_core.o
-adis16204-$(CONFIG_IIO_BUFFER) += adis16204_ring.o adis16204_trigger.o
obj-$(CONFIG_ADIS16204) += adis16204.o
adis16209-y := adis16209_core.o
-adis16209-$(CONFIG_IIO_BUFFER) += adis16209_ring.o adis16209_trigger.o
obj-$(CONFIG_ADIS16209) += adis16209.o
adis16220-y := adis16220_core.o
obj-$(CONFIG_ADIS16220) += adis16220.o
adis16240-y := adis16240_core.o
-adis16240-$(CONFIG_IIO_BUFFER) += adis16240_ring.o adis16240_trigger.o
obj-$(CONFIG_ADIS16240) += adis16240.o
obj-$(CONFIG_KXSD9) += kxsd9.o
diff --git a/drivers/staging/iio/accel/adis16201.h b/drivers/staging/iio/accel/adis16201.h
index 72750f7..8747de5 100644
--- a/drivers/staging/iio/accel/adis16201.h
+++ b/drivers/staging/iio/accel/adis16201.h
@@ -3,9 +3,6 @@
#define ADIS16201_STARTUP_DELAY 220 /* ms */
-#define ADIS16201_READ_REG(a) a
-#define ADIS16201_WRITE_REG(a) ((a) | 0x80)
-
#define ADIS16201_FLASH_CNT 0x00 /* Flash memory write count */
#define ADIS16201_SUPPLY_OUT 0x02 /* Output, power supply */
#define ADIS16201_XACCL_OUT 0x04 /* Output, x-axis accelerometer */
@@ -36,8 +33,6 @@
#define ADIS16201_DIAG_STAT 0x3C /* Diagnostics, system status register */
#define ADIS16201_GLOB_CMD 0x3E /* Operation, system command register */
-#define ADIS16201_OUTPUTS 7
-
/* MSC_CTRL */
#define ADIS16201_MSC_CTRL_SELF_TEST_EN (1 << 8) /* Self-test enable */
#define ADIS16201_MSC_CTRL_DATA_RDY_EN (1 << 2) /* Data-ready enable: 1 = enabled, 0 = disabled */
@@ -47,95 +42,25 @@
/* DIAG_STAT */
#define ADIS16201_DIAG_STAT_ALARM2 (1<<9) /* Alarm 2 status: 1 = alarm active, 0 = alarm inactive */
#define ADIS16201_DIAG_STAT_ALARM1 (1<<8) /* Alarm 1 status: 1 = alarm active, 0 = alarm inactive */
-#define ADIS16201_DIAG_STAT_SPI_FAIL (1<<3) /* SPI communications failure */
-#define ADIS16201_DIAG_STAT_FLASH_UPT (1<<2) /* Flash update failure */
-#define ADIS16201_DIAG_STAT_POWER_HIGH (1<<1) /* Power supply above 3.625 V */
-#define ADIS16201_DIAG_STAT_POWER_LOW (1<<0) /* Power supply below 3.15 V */
+#define ADIS16201_DIAG_STAT_SPI_FAIL_BIT 3 /* SPI communications failure */
+#define ADIS16201_DIAG_STAT_FLASH_UPT_BIT 2 /* Flash update failure */
+#define ADIS16201_DIAG_STAT_POWER_HIGH_BIT 1 /* Power supply above 3.625 V */
+#define ADIS16201_DIAG_STAT_POWER_LOW_BIT 0 /* Power supply below 3.15 V */
/* GLOB_CMD */
#define ADIS16201_GLOB_CMD_SW_RESET (1<<7)
#define ADIS16201_GLOB_CMD_FACTORY_CAL (1<<1)
-#define ADIS16201_MAX_TX 14
-#define ADIS16201_MAX_RX 14
-
#define ADIS16201_ERROR_ACTIVE (1<<14)
-/**
- * struct adis16201_state - device instance specific data
- * @us: actual spi_device
- * @trig: data ready trigger registered with iio
- * @tx: transmit buffer
- * @rx: receive buffer
- * @buf_lock: mutex to protect tx and rx
- **/
-struct adis16201_state {
- struct spi_device *us;
- struct iio_trigger *trig;
- struct mutex buf_lock;
- u8 tx[14] ____cacheline_aligned;
- u8 rx[14];
-};
-
-int adis16201_set_irq(struct iio_dev *indio_dev, bool enable);
-
enum adis16201_scan {
- ADIS16201_SCAN_SUPPLY,
ADIS16201_SCAN_ACC_X,
ADIS16201_SCAN_ACC_Y,
- ADIS16201_SCAN_AUX_ADC,
- ADIS16201_SCAN_TEMP,
ADIS16201_SCAN_INCLI_X,
ADIS16201_SCAN_INCLI_Y,
+ ADIS16201_SCAN_SUPPLY,
+ ADIS16201_SCAN_AUX_ADC,
+ ADIS16201_SCAN_TEMP,
};
-#ifdef CONFIG_IIO_BUFFER
-void adis16201_remove_trigger(struct iio_dev *indio_dev);
-int adis16201_probe_trigger(struct iio_dev *indio_dev);
-
-ssize_t adis16201_read_data_from_ring(struct device *dev,
- struct device_attribute *attr,
- char *buf);
-
-int adis16201_configure_ring(struct iio_dev *indio_dev);
-void adis16201_unconfigure_ring(struct iio_dev *indio_dev);
-
-#else /* CONFIG_IIO_BUFFER */
-
-static inline void adis16201_remove_trigger(struct iio_dev *indio_dev)
-{
-}
-
-static inline int adis16201_probe_trigger(struct iio_dev *indio_dev)
-{
- return 0;
-}
-
-static inline ssize_t
-adis16201_read_data_from_ring(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- return 0;
-}
-
-static int adis16201_configure_ring(struct iio_dev *indio_dev)
-{
- return 0;
-}
-
-static inline void adis16201_unconfigure_ring(struct iio_dev *indio_dev)
-{
-}
-
-static inline int adis16201_initialize_ring(struct iio_ring_buffer *ring)
-{
- return 0;
-}
-
-static inline void adis16201_uninitialize_ring(struct iio_ring_buffer *ring)
-{
-}
-
-#endif /* CONFIG_IIO_BUFFER */
#endif /* SPI_ADIS16201_H_ */
diff --git a/drivers/staging/iio/accel/adis16201_core.c b/drivers/staging/iio/accel/adis16201_core.c
index b12ca68..9e5791f 100644
--- a/drivers/staging/iio/accel/adis16201_core.c
+++ b/drivers/staging/iio/accel/adis16201_core.c
@@ -18,258 +18,15 @@
#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
#include <linux/iio/buffer.h>
+#include <linux/iio/imu/adis.h>
#include "adis16201.h"
-enum adis16201_chan {
- in_supply,
- temp,
- accel_x,
- accel_y,
- incli_x,
- incli_y,
- in_aux,
-};
-
-/**
- * adis16201_spi_write_reg_8() - write single byte to a register
- * @dev: device associated with child of actual device (iio_dev or iio_trig)
- * @reg_address: the address of the register to be written
- * @val: the value to write
- **/
-static int adis16201_spi_write_reg_8(struct iio_dev *indio_dev,
- u8 reg_address,
- u8 val)
-{
- int ret;
- struct adis16201_state *st = iio_priv(indio_dev);
-
- mutex_lock(&st->buf_lock);
- st->tx[0] = ADIS16201_WRITE_REG(reg_address);
- st->tx[1] = val;
-
- ret = spi_write(st->us, st->tx, 2);
- mutex_unlock(&st->buf_lock);
-
- return ret;
-}
-
-/**
- * adis16201_spi_write_reg_16() - write 2 bytes to a pair of registers
- * @indio_dev: iio device associated with child of actual device
- * @reg_address: the address of the lower of the two registers. Second register
- * is assumed to have address one greater.
- * @val: value to be written
- **/
-static int adis16201_spi_write_reg_16(struct iio_dev *indio_dev,
- u8 lower_reg_address,
- u16 value)
-{
- int ret;
- struct spi_message msg;
- struct adis16201_state *st = iio_priv(indio_dev);
- struct spi_transfer xfers[] = {
- {
- .tx_buf = st->tx,
- .bits_per_word = 8,
- .len = 2,
- .cs_change = 1,
- }, {
- .tx_buf = st->tx + 2,
- .bits_per_word = 8,
- .len = 2,
- },
- };
-
- mutex_lock(&st->buf_lock);
- st->tx[0] = ADIS16201_WRITE_REG(lower_reg_address);
- st->tx[1] = value & 0xFF;
- st->tx[2] = ADIS16201_WRITE_REG(lower_reg_address + 1);
- st->tx[3] = (value >> 8) & 0xFF;
-
- spi_message_init(&msg);
- spi_message_add_tail(&xfers[0], &msg);
- spi_message_add_tail(&xfers[1], &msg);
- ret = spi_sync(st->us, &msg);
- mutex_unlock(&st->buf_lock);
-
- return ret;
-}
-
-/**
- * adis16201_spi_read_reg_16() - read 2 bytes from a 16-bit register
- * @indio_dev: iio device associated with child of actual device
- * @reg_address: the address of the lower of the two registers. Second register
- * is assumed to have address one greater.
- * @val: somewhere to pass back the value read
- **/
-static int adis16201_spi_read_reg_16(struct iio_dev *indio_dev,
- u8 lower_reg_address,
- u16 *val)
-{
- struct spi_message msg;
- struct adis16201_state *st = iio_priv(indio_dev);
- int ret;
- struct spi_transfer xfers[] = {
- {
- .tx_buf = st->tx,
- .bits_per_word = 8,
- .len = 2,
- .cs_change = 1,
- .delay_usecs = 20,
- }, {
- .rx_buf = st->rx,
- .bits_per_word = 8,
- .len = 2,
- .delay_usecs = 20,
- },
- };
-
- mutex_lock(&st->buf_lock);
- st->tx[0] = ADIS16201_READ_REG(lower_reg_address);
- st->tx[1] = 0;
-
- spi_message_init(&msg);
- spi_message_add_tail(&xfers[0], &msg);
- spi_message_add_tail(&xfers[1], &msg);
- ret = spi_sync(st->us, &msg);
- if (ret) {
- dev_err(&st->us->dev, "problem when reading 16 bit register 0x%02X",
- lower_reg_address);
- goto error_ret;
- }
- *val = (st->rx[0] << 8) | st->rx[1];
-
-error_ret:
- mutex_unlock(&st->buf_lock);
- return ret;
-}
-
-static int adis16201_reset(struct iio_dev *indio_dev)
-{
- int ret;
- struct adis16201_state *st = iio_priv(indio_dev);
-
- ret = adis16201_spi_write_reg_8(indio_dev,
- ADIS16201_GLOB_CMD,
- ADIS16201_GLOB_CMD_SW_RESET);
- if (ret)
- dev_err(&st->us->dev, "problem resetting device");
-
- return ret;
-}
-
-int adis16201_set_irq(struct iio_dev *indio_dev, bool enable)
-{
- int ret = 0;
- u16 msc;
-
- ret = adis16201_spi_read_reg_16(indio_dev, ADIS16201_MSC_CTRL, &msc);
- if (ret)
- goto error_ret;
-
- msc |= ADIS16201_MSC_CTRL_ACTIVE_HIGH;
- msc &= ~ADIS16201_MSC_CTRL_DATA_RDY_DIO1;
- if (enable)
- msc |= ADIS16201_MSC_CTRL_DATA_RDY_EN;
- else
- msc &= ~ADIS16201_MSC_CTRL_DATA_RDY_EN;
-
- ret = adis16201_spi_write_reg_16(indio_dev, ADIS16201_MSC_CTRL, msc);
-
-error_ret:
- return ret;
-}
-
-static int adis16201_check_status(struct iio_dev *indio_dev)
-{
- u16 status;
- int ret;
-
- ret = adis16201_spi_read_reg_16(indio_dev,
- ADIS16201_DIAG_STAT, &status);
- if (ret < 0) {
- dev_err(&indio_dev->dev, "Reading status failed\n");
- goto error_ret;
- }
- ret = status & 0xF;
- if (ret)
- ret = -EFAULT;
-
- if (status & ADIS16201_DIAG_STAT_SPI_FAIL)
- dev_err(&indio_dev->dev, "SPI failure\n");
- if (status & ADIS16201_DIAG_STAT_FLASH_UPT)
- dev_err(&indio_dev->dev, "Flash update failed\n");
- if (status & ADIS16201_DIAG_STAT_POWER_HIGH)
- dev_err(&indio_dev->dev, "Power supply above 3.625V\n");
- if (status & ADIS16201_DIAG_STAT_POWER_LOW)
- dev_err(&indio_dev->dev, "Power supply below 3.15V\n");
-
-error_ret:
- return ret;
-}
-
-static int adis16201_self_test(struct iio_dev *indio_dev)
-{
- int ret;
- ret = adis16201_spi_write_reg_16(indio_dev,
- ADIS16201_MSC_CTRL,
- ADIS16201_MSC_CTRL_SELF_TEST_EN);
- if (ret) {
- dev_err(&indio_dev->dev, "problem starting self test");
- goto err_ret;
- }
-
- ret = adis16201_check_status(indio_dev);
-
-err_ret:
- return ret;
-}
-
-static int adis16201_initial_setup(struct iio_dev *indio_dev)
-{
- int ret;
- struct device *dev = &indio_dev->dev;
-
- /* Disable IRQ */
- ret = adis16201_set_irq(indio_dev, false);
- if (ret) {
- dev_err(dev, "disable irq failed");
- goto err_ret;
- }
-
- /* Do self test */
- ret = adis16201_self_test(indio_dev);
- if (ret) {
- dev_err(dev, "self test failure");
- goto err_ret;
- }
-
- /* Read status register to check the result */
- ret = adis16201_check_status(indio_dev);
- if (ret) {
- adis16201_reset(indio_dev);
- dev_err(dev, "device not playing ball -> reset");
- msleep(ADIS16201_STARTUP_DELAY);
- ret = adis16201_check_status(indio_dev);
- if (ret) {
- dev_err(dev, "giving up");
- goto err_ret;
- }
- }
-
-err_ret:
- return ret;
-}
-
-static u8 adis16201_addresses[7][2] = {
- [in_supply] = { ADIS16201_SUPPLY_OUT, },
- [temp] = { ADIS16201_TEMP_OUT },
- [accel_x] = { ADIS16201_XACCL_OUT, ADIS16201_XACCL_OFFS },
- [accel_y] = { ADIS16201_YACCL_OUT, ADIS16201_YACCL_OFFS },
- [in_aux] = { ADIS16201_AUX_ADC },
- [incli_x] = { ADIS16201_XINCL_OUT },
- [incli_y] = { ADIS16201_YINCL_OUT },
+static const u8 adis16201_addresses[] = {
+ [ADIS16201_SCAN_ACC_X] = ADIS16201_XACCL_OFFS,
+ [ADIS16201_SCAN_ACC_Y] = ADIS16201_YACCL_OFFS,
+ [ADIS16201_SCAN_INCLI_X] = ADIS16201_XINCL_OFFS,
+ [ADIS16201_SCAN_INCLI_Y] = ADIS16201_YINCL_OFFS,
};
static int adis16201_read_raw(struct iio_dev *indio_dev,
@@ -277,6 +34,7 @@
int *val, int *val2,
long mask)
{
+ struct adis *st = iio_priv(indio_dev);
int ret;
int bits;
u8 addr;
@@ -284,29 +42,8 @@
switch (mask) {
case IIO_CHAN_INFO_RAW:
- mutex_lock(&indio_dev->mlock);
- addr = adis16201_addresses[chan->address][0];
- ret = adis16201_spi_read_reg_16(indio_dev, addr, &val16);
- if (ret) {
- mutex_unlock(&indio_dev->mlock);
- return ret;
- }
-
- if (val16 & ADIS16201_ERROR_ACTIVE) {
- ret = adis16201_check_status(indio_dev);
- if (ret) {
- mutex_unlock(&indio_dev->mlock);
- return ret;
- }
- }
- val16 = val16 & ((1 << chan->scan_type.realbits) - 1);
- if (chan->scan_type.sign == 's')
- val16 = (s16)(val16 <<
- (16 - chan->scan_type.realbits)) >>
- (16 - chan->scan_type.realbits);
- *val = val16;
- mutex_unlock(&indio_dev->mlock);
- return IIO_VAL_INT;
+ return adis_single_conversion(indio_dev, chan,
+ ADIS16201_ERROR_ACTIVE, val);
case IIO_CHAN_INFO_SCALE:
switch (chan->type) {
case IIO_VOLTAGE:
@@ -347,10 +84,10 @@
break;
default:
return -EINVAL;
- };
+ }
mutex_lock(&indio_dev->mlock);
- addr = adis16201_addresses[chan->address][1];
- ret = adis16201_spi_read_reg_16(indio_dev, addr, &val16);
+ addr = adis16201_addresses[chan->scan_index];
+ ret = adis_read_reg_16(st, addr, &val16);
if (ret) {
mutex_unlock(&indio_dev->mlock);
return ret;
@@ -370,6 +107,7 @@
int val2,
long mask)
{
+ struct adis *st = iio_priv(indio_dev);
int bits;
s16 val16;
u8 addr;
@@ -384,126 +122,63 @@
break;
default:
return -EINVAL;
- };
+ }
val16 = val & ((1 << bits) - 1);
- addr = adis16201_addresses[chan->address][1];
- return adis16201_spi_write_reg_16(indio_dev, addr, val16);
+ addr = adis16201_addresses[chan->scan_index];
+ return adis_write_reg_16(st, addr, val16);
}
return -EINVAL;
}
static const struct iio_chan_spec adis16201_channels[] = {
- {
- .type = IIO_VOLTAGE,
- .indexed = 1,
- .channel = 0,
- .extend_name = "supply",
- .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
- IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
- .address = in_supply,
- .scan_index = ADIS16201_SCAN_SUPPLY,
- .scan_type = {
- .sign = 'u',
- .realbits = 12,
- .storagebits = 16,
- },
- }, {
- .type = IIO_TEMP,
- .indexed = 1,
- .channel = 0,
- .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
- IIO_CHAN_INFO_SCALE_SEPARATE_BIT |
- IIO_CHAN_INFO_OFFSET_SEPARATE_BIT,
- .address = temp,
- .scan_index = ADIS16201_SCAN_TEMP,
- .scan_type = {
- .sign = 'u',
- .realbits = 12,
- .storagebits = 16,
- },
- }, {
- .type = IIO_ACCEL,
- .modified = 1,
- .channel2 = IIO_MOD_X,
- .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
- IIO_CHAN_INFO_SCALE_SHARED_BIT |
- IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT,
- .address = accel_x,
- .scan_index = ADIS16201_SCAN_ACC_X,
- .scan_type = {
- .sign = 's',
- .realbits = 14,
- .storagebits = 16,
- },
- }, {
- .type = IIO_ACCEL,
- .modified = 1,
- .channel2 = IIO_MOD_Y,
- .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
- IIO_CHAN_INFO_SCALE_SHARED_BIT |
- IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT,
- .address = accel_y,
- .scan_index = ADIS16201_SCAN_ACC_Y,
- .scan_type = {
- .sign = 's',
- .realbits = 14,
- .storagebits = 16,
- },
- }, {
- .type = IIO_VOLTAGE,
- .indexed = 1,
- .channel = 1,
- .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
- IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
- .address = in_aux,
- .scan_index = ADIS16201_SCAN_AUX_ADC,
- .scan_type = {
- .sign = 'u',
- .realbits = 12,
- .storagebits = 16,
- },
- }, {
- .type = IIO_INCLI,
- .modified = 1,
- .channel2 = IIO_MOD_X,
- .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
- IIO_CHAN_INFO_SCALE_SHARED_BIT |
- IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT,
- .address = incli_x,
- .scan_index = ADIS16201_SCAN_INCLI_X,
- .scan_type = {
- .sign = 's',
- .realbits = 14,
- .storagebits = 16,
- },
- }, {
- .type = IIO_INCLI,
- .modified = 1,
- .channel2 = IIO_MOD_Y,
- .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
- IIO_CHAN_INFO_SCALE_SHARED_BIT |
- IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT,
- .address = incli_y,
- .scan_index = ADIS16201_SCAN_INCLI_Y,
- .scan_type = {
- .sign = 's',
- .realbits = 14,
- .storagebits = 16,
- },
- },
+ ADIS_SUPPLY_CHAN(ADIS16201_SUPPLY_OUT, ADIS16201_SCAN_SUPPLY, 12),
+ ADIS_TEMP_CHAN(ADIS16201_TEMP_OUT, ADIS16201_SCAN_TEMP, 12),
+ ADIS_ACCEL_CHAN(X, ADIS16201_XACCL_OUT, ADIS16201_SCAN_ACC_X,
+ IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT, 14),
+ ADIS_ACCEL_CHAN(Y, ADIS16201_YACCL_OUT, ADIS16201_SCAN_ACC_Y,
+ IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT, 14),
+ ADIS_AUX_ADC_CHAN(ADIS16201_AUX_ADC, ADIS16201_SCAN_AUX_ADC, 12),
+ ADIS_INCLI_CHAN(X, ADIS16201_XINCL_OUT, ADIS16201_SCAN_INCLI_X,
+ IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT, 14),
+ ADIS_INCLI_CHAN(X, ADIS16201_YINCL_OUT, ADIS16201_SCAN_INCLI_Y,
+ IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT, 14),
IIO_CHAN_SOFT_TIMESTAMP(7)
};
static const struct iio_info adis16201_info = {
.read_raw = &adis16201_read_raw,
.write_raw = &adis16201_write_raw,
+ .update_scan_mode = adis_update_scan_mode,
.driver_module = THIS_MODULE,
};
-static int __devinit adis16201_probe(struct spi_device *spi)
+static const char * const adis16201_status_error_msgs[] = {
+ [ADIS16201_DIAG_STAT_SPI_FAIL_BIT] = "SPI failure",
+ [ADIS16201_DIAG_STAT_FLASH_UPT_BIT] = "Flash update failed",
+ [ADIS16201_DIAG_STAT_POWER_HIGH_BIT] = "Power supply above 3.625V",
+ [ADIS16201_DIAG_STAT_POWER_LOW_BIT] = "Power supply below 3.15V",
+};
+
+static const struct adis_data adis16201_data = {
+ .read_delay = 20,
+ .msc_ctrl_reg = ADIS16201_MSC_CTRL,
+ .glob_cmd_reg = ADIS16201_GLOB_CMD,
+ .diag_stat_reg = ADIS16201_DIAG_STAT,
+
+ .self_test_mask = ADIS16201_MSC_CTRL_SELF_TEST_EN,
+ .startup_delay = ADIS16201_STARTUP_DELAY,
+
+ .status_error_msgs = adis16201_status_error_msgs,
+ .status_error_mask = BIT(ADIS16201_DIAG_STAT_SPI_FAIL_BIT) |
+ BIT(ADIS16201_DIAG_STAT_FLASH_UPT_BIT) |
+ BIT(ADIS16201_DIAG_STAT_POWER_HIGH_BIT) |
+ BIT(ADIS16201_DIAG_STAT_POWER_LOW_BIT),
+};
+
+static int adis16201_probe(struct spi_device *spi)
{
int ret;
- struct adis16201_state *st;
+ struct adis *st;
struct iio_dev *indio_dev;
/* setup the industrialio driver allocated elements */
@@ -516,9 +191,6 @@
/* this is only used for removal purposes */
spi_set_drvdata(spi, indio_dev);
- st->us = spi;
- mutex_init(&st->buf_lock);
-
indio_dev->name = spi->dev.driver->name;
indio_dev->dev.parent = &spi->dev;
indio_dev->info = &adis16201_info;
@@ -527,54 +199,38 @@
indio_dev->num_channels = ARRAY_SIZE(adis16201_channels);
indio_dev->modes = INDIO_DIRECT_MODE;
- ret = adis16201_configure_ring(indio_dev);
+ ret = adis_init(st, indio_dev, spi, &adis16201_data);
+ if (ret)
+ goto error_free_dev;
+ ret = adis_setup_buffer_and_trigger(st, indio_dev, NULL);
if (ret)
goto error_free_dev;
- ret = iio_buffer_register(indio_dev,
- adis16201_channels,
- ARRAY_SIZE(adis16201_channels));
- if (ret) {
- printk(KERN_ERR "failed to initialize the ring\n");
- goto error_unreg_ring_funcs;
- }
-
- if (spi->irq) {
- ret = adis16201_probe_trigger(indio_dev);
- if (ret)
- goto error_uninitialize_ring;
- }
-
/* Get the device into a sane initial state */
- ret = adis16201_initial_setup(indio_dev);
+ ret = adis_initial_startup(st);
if (ret)
- goto error_remove_trigger;
+ goto error_cleanup_buffer_trigger;
ret = iio_device_register(indio_dev);
if (ret < 0)
- goto error_remove_trigger;
+ goto error_cleanup_buffer_trigger;
return 0;
-error_remove_trigger:
- adis16201_remove_trigger(indio_dev);
-error_uninitialize_ring:
- iio_buffer_unregister(indio_dev);
-error_unreg_ring_funcs:
- adis16201_unconfigure_ring(indio_dev);
+error_cleanup_buffer_trigger:
+ adis_cleanup_buffer_and_trigger(st, indio_dev);
error_free_dev:
iio_device_free(indio_dev);
error_ret:
return ret;
}
-static int __devexit adis16201_remove(struct spi_device *spi)
+static int adis16201_remove(struct spi_device *spi)
{
struct iio_dev *indio_dev = spi_get_drvdata(spi);
+ struct adis *st = iio_priv(indio_dev);
iio_device_unregister(indio_dev);
- adis16201_remove_trigger(indio_dev);
- iio_buffer_unregister(indio_dev);
- adis16201_unconfigure_ring(indio_dev);
+ adis_cleanup_buffer_and_trigger(st, indio_dev);
iio_device_free(indio_dev);
return 0;
@@ -586,7 +242,7 @@
.owner = THIS_MODULE,
},
.probe = adis16201_probe,
- .remove = __devexit_p(adis16201_remove),
+ .remove = adis16201_remove,
};
module_spi_driver(adis16201_driver);
diff --git a/drivers/staging/iio/accel/adis16201_ring.c b/drivers/staging/iio/accel/adis16201_ring.c
deleted file mode 100644
index 97c09f0..0000000
--- a/drivers/staging/iio/accel/adis16201_ring.c
+++ /dev/null
@@ -1,136 +0,0 @@
-#include <linux/export.h>
-#include <linux/interrupt.h>
-#include <linux/mutex.h>
-#include <linux/kernel.h>
-#include <linux/spi/spi.h>
-#include <linux/slab.h>
-
-#include <linux/iio/iio.h>
-#include "../ring_sw.h"
-#include <linux/iio/trigger_consumer.h>
-#include "adis16201.h"
-
-
-/**
- * adis16201_read_ring_data() read data registers which will be placed into ring
- * @dev: device associated with child of actual device (iio_dev or iio_trig)
- * @rx: somewhere to pass back the value read
- **/
-static int adis16201_read_ring_data(struct iio_dev *indio_dev, u8 *rx)
-{
- struct spi_message msg;
- struct adis16201_state *st = iio_priv(indio_dev);
- struct spi_transfer xfers[ADIS16201_OUTPUTS + 1];
- int ret;
- int i;
-
- mutex_lock(&st->buf_lock);
-
- spi_message_init(&msg);
-
- memset(xfers, 0, sizeof(xfers));
- for (i = 0; i <= ADIS16201_OUTPUTS; i++) {
- xfers[i].bits_per_word = 8;
- xfers[i].cs_change = 1;
- xfers[i].len = 2;
- xfers[i].delay_usecs = 20;
- if (i < ADIS16201_OUTPUTS) {
- xfers[i].tx_buf = st->tx + 2 * i;
- st->tx[2 * i] = ADIS16201_READ_REG(ADIS16201_SUPPLY_OUT +
- 2 * i);
- st->tx[2 * i + 1] = 0;
- }
- if (i >= 1)
- xfers[i].rx_buf = rx + 2 * (i - 1);
- spi_message_add_tail(&xfers[i], &msg);
- }
-
- ret = spi_sync(st->us, &msg);
- if (ret)
- dev_err(&st->us->dev, "problem when burst reading");
-
- mutex_unlock(&st->buf_lock);
-
- return ret;
-}
-
-/* Whilst this makes a lot of calls to iio_sw_ring functions - it is to device
- * specific to be rolled into the core.
- */
-static irqreturn_t adis16201_trigger_handler(int irq, void *p)
-{
- struct iio_poll_func *pf = p;
- struct iio_dev *indio_dev = pf->indio_dev;
- struct adis16201_state *st = iio_priv(indio_dev);
-
- int i = 0;
- s16 *data;
-
- data = kmalloc(indio_dev->scan_bytes, GFP_KERNEL);
- if (data == NULL) {
- dev_err(&st->us->dev, "memory alloc failed in ring bh");
- goto done;
- }
-
- if (!bitmap_empty(indio_dev->active_scan_mask, indio_dev->masklength)
- && adis16201_read_ring_data(indio_dev, st->rx) >= 0)
- for (; i < bitmap_weight(indio_dev->active_scan_mask,
- indio_dev->masklength); i++)
- data[i] = be16_to_cpup((__be16 *)&(st->rx[i*2]));
-
- /* Guaranteed to be aligned with 8 byte boundary */
- if (indio_dev->scan_timestamp)
- *((s64 *)(data + ((i + 3)/4)*4)) = pf->timestamp;
-
- iio_push_to_buffer(indio_dev->buffer, (u8 *)data);
-
- kfree(data);
-done:
- iio_trigger_notify_done(indio_dev->trig);
-
- return IRQ_HANDLED;
-}
-
-void adis16201_unconfigure_ring(struct iio_dev *indio_dev)
-{
- iio_dealloc_pollfunc(indio_dev->pollfunc);
- iio_sw_rb_free(indio_dev->buffer);
-}
-
-static const struct iio_buffer_setup_ops adis16201_ring_setup_ops = {
- .preenable = &iio_sw_buffer_preenable,
- .postenable = &iio_triggered_buffer_postenable,
- .predisable = &iio_triggered_buffer_predisable,
-};
-
-int adis16201_configure_ring(struct iio_dev *indio_dev)
-{
- int ret = 0;
- struct iio_buffer *ring;
-
- ring = iio_sw_rb_allocate(indio_dev);
- if (!ring) {
- ret = -ENOMEM;
- return ret;
- }
- indio_dev->buffer = ring;
- ring->scan_timestamp = true;
- indio_dev->setup_ops = &adis16201_ring_setup_ops;
-
- indio_dev->pollfunc = iio_alloc_pollfunc(&iio_pollfunc_store_time,
- &adis16201_trigger_handler,
- IRQF_ONESHOT,
- indio_dev,
- "adis16201_consumer%d",
- indio_dev->id);
- if (indio_dev->pollfunc == NULL) {
- ret = -ENOMEM;
- goto error_iio_sw_rb_free;
- }
-
- indio_dev->modes |= INDIO_BUFFER_TRIGGERED;
- return 0;
-error_iio_sw_rb_free:
- iio_sw_rb_free(indio_dev->buffer);
- return ret;
-}
diff --git a/drivers/staging/iio/accel/adis16201_trigger.c b/drivers/staging/iio/accel/adis16201_trigger.c
deleted file mode 100644
index 96fdabb..0000000
--- a/drivers/staging/iio/accel/adis16201_trigger.c
+++ /dev/null
@@ -1,71 +0,0 @@
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/spi/spi.h>
-#include <linux/export.h>
-
-#include <linux/iio/iio.h>
-#include <linux/iio/trigger.h>
-#include "adis16201.h"
-
-/**
- * adis16201_data_rdy_trigger_set_state() set datardy interrupt state
- **/
-static int adis16201_data_rdy_trigger_set_state(struct iio_trigger *trig,
- bool state)
-{
- struct iio_dev *indio_dev = trig->private_data;
-
- dev_dbg(&indio_dev->dev, "%s (%d)\n", __func__, state);
- return adis16201_set_irq(indio_dev, state);
-}
-
-static const struct iio_trigger_ops adis16201_trigger_ops = {
- .owner = THIS_MODULE,
- .set_trigger_state = &adis16201_data_rdy_trigger_set_state,
-};
-
-int adis16201_probe_trigger(struct iio_dev *indio_dev)
-{
- int ret;
- struct adis16201_state *st = iio_priv(indio_dev);
-
- st->trig = iio_trigger_alloc("adis16201-dev%d", indio_dev->id);
- if (st->trig == NULL) {
- ret = -ENOMEM;
- goto error_ret;
- }
- ret = request_irq(st->us->irq,
- &iio_trigger_generic_data_rdy_poll,
- IRQF_TRIGGER_RISING,
- "adis16201",
- st->trig);
- if (ret)
- goto error_free_trig;
- st->trig->dev.parent = &st->us->dev;
- st->trig->ops = &adis16201_trigger_ops;
- st->trig->private_data = indio_dev;
- ret = iio_trigger_register(st->trig);
-
- /* select default trigger */
- indio_dev->trig = st->trig;
- if (ret)
- goto error_free_irq;
-
- return 0;
-
-error_free_irq:
- free_irq(st->us->irq, st->trig);
-error_free_trig:
- iio_trigger_free(st->trig);
-error_ret:
- return ret;
-}
-
-void adis16201_remove_trigger(struct iio_dev *indio_dev)
-{
- struct adis16201_state *state = iio_priv(indio_dev);
-
- iio_trigger_unregister(state->trig);
- free_irq(state->us->irq, state->trig);
- iio_trigger_free(state->trig);
-}
diff --git a/drivers/staging/iio/accel/adis16203.h b/drivers/staging/iio/accel/adis16203.h
index 3f96ad3..acc688d 100644
--- a/drivers/staging/iio/accel/adis16203.h
+++ b/drivers/staging/iio/accel/adis16203.h
@@ -3,9 +3,6 @@
#define ADIS16203_STARTUP_DELAY 220 /* ms */
-#define ADIS16203_READ_REG(a) a
-#define ADIS16203_WRITE_REG(a) ((a) | 0x80)
-
#define ADIS16203_FLASH_CNT 0x00 /* Flash memory write count */
#define ADIS16203_SUPPLY_OUT 0x02 /* Output, power supply */
#define ADIS16203_AUX_ADC 0x08 /* Output, auxiliary ADC input */
@@ -27,8 +24,6 @@
#define ADIS16203_DIAG_STAT 0x3C /* Diagnostics, system status register */
#define ADIS16203_GLOB_CMD 0x3E /* Operation, system command register */
-#define ADIS16203_OUTPUTS 5
-
/* MSC_CTRL */
#define ADIS16203_MSC_CTRL_PWRUP_SELF_TEST (1 << 10) /* Self-test at power-on: 1 = disabled, 0 = enabled */
#define ADIS16203_MSC_CTRL_REVERSE_ROT_EN (1 << 9) /* Reverses rotation of both inclination outputs */
@@ -40,86 +35,25 @@
/* DIAG_STAT */
#define ADIS16203_DIAG_STAT_ALARM2 (1<<9) /* Alarm 2 status: 1 = alarm active, 0 = alarm inactive */
#define ADIS16203_DIAG_STAT_ALARM1 (1<<8) /* Alarm 1 status: 1 = alarm active, 0 = alarm inactive */
-#define ADIS16203_DIAG_STAT_SELFTEST_FAIL (1<<5) /* Self-test diagnostic error flag */
-#define ADIS16203_DIAG_STAT_SPI_FAIL (1<<3) /* SPI communications failure */
-#define ADIS16203_DIAG_STAT_FLASH_UPT (1<<2) /* Flash update failure */
-#define ADIS16203_DIAG_STAT_POWER_HIGH (1<<1) /* Power supply above 3.625 V */
-#define ADIS16203_DIAG_STAT_POWER_LOW (1<<0) /* Power supply below 3.15 V */
+#define ADIS16203_DIAG_STAT_SELFTEST_FAIL_BIT 5 /* Self-test diagnostic error flag */
+#define ADIS16203_DIAG_STAT_SPI_FAIL_BIT 3 /* SPI communications failure */
+#define ADIS16203_DIAG_STAT_FLASH_UPT_BIT 2 /* Flash update failure */
+#define ADIS16203_DIAG_STAT_POWER_HIGH_BIT 1 /* Power supply above 3.625 V */
+#define ADIS16203_DIAG_STAT_POWER_LOW_BIT 0 /* Power supply below 3.15 V */
/* GLOB_CMD */
#define ADIS16203_GLOB_CMD_SW_RESET (1<<7)
#define ADIS16203_GLOB_CMD_CLEAR_STAT (1<<4)
#define ADIS16203_GLOB_CMD_FACTORY_CAL (1<<1)
-#define ADIS16203_MAX_TX 12
-#define ADIS16203_MAX_RX 10
-
#define ADIS16203_ERROR_ACTIVE (1<<14)
-/**
- * struct adis16203_state - device instance specific data
- * @us: actual spi_device
- * @trig: data ready trigger registered with iio
- * @tx: transmit buffer
- * @rx: receive buffer
- * @buf_lock: mutex to protect tx and rx
- **/
-struct adis16203_state {
- struct spi_device *us;
- struct iio_trigger *trig;
- struct mutex buf_lock;
- u8 tx[ADIS16203_MAX_TX] ____cacheline_aligned;
- u8 rx[ADIS16203_MAX_RX];
-};
-
-int adis16203_set_irq(struct iio_dev *indio_dev, bool enable);
-
enum adis16203_scan {
+ ADIS16203_SCAN_INCLI_X,
+ ADIS16203_SCAN_INCLI_Y,
ADIS16203_SCAN_SUPPLY,
ADIS16203_SCAN_AUX_ADC,
ADIS16203_SCAN_TEMP,
- ADIS16203_SCAN_INCLI_X,
- ADIS16203_SCAN_INCLI_Y,
};
-#ifdef CONFIG_IIO_BUFFER
-void adis16203_remove_trigger(struct iio_dev *indio_dev);
-int adis16203_probe_trigger(struct iio_dev *indio_dev);
-
-ssize_t adis16203_read_data_from_ring(struct device *dev,
- struct device_attribute *attr,
- char *buf);
-
-int adis16203_configure_ring(struct iio_dev *indio_dev);
-void adis16203_unconfigure_ring(struct iio_dev *indio_dev);
-
-#else /* CONFIG_IIO_BUFFER */
-
-static inline void adis16203_remove_trigger(struct iio_dev *indio_dev)
-{
-}
-
-static inline int adis16203_probe_trigger(struct iio_dev *indio_dev)
-{
- return 0;
-}
-
-static inline ssize_t
-adis16203_read_data_from_ring(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- return 0;
-}
-
-static int adis16203_configure_ring(struct iio_dev *indio_dev)
-{
- return 0;
-}
-
-static inline void adis16203_unconfigure_ring(struct iio_dev *indio_dev)
-{
-}
-
-#endif /* CONFIG_IIO_BUFFER */
#endif /* SPI_ADIS16203_H_ */
diff --git a/drivers/staging/iio/accel/adis16203_core.c b/drivers/staging/iio/accel/adis16203_core.c
index e7b3441..8c23527 100644
--- a/drivers/staging/iio/accel/adis16203_core.c
+++ b/drivers/staging/iio/accel/adis16203_core.c
@@ -1,7 +1,7 @@
/*
* ADIS16203 Programmable Digital Vibration Sensor driver
*
- * Copyright 2010 Analog Devices Inc.
+ * Copyright 2030 Analog Devices Inc.
*
* Licensed under the GPL-2 or later.
*/
@@ -18,254 +18,14 @@
#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
#include <linux/iio/buffer.h>
+#include <linux/iio/imu/adis.h>
#include "adis16203.h"
#define DRIVER_NAME "adis16203"
-/**
- * adis16203_spi_write_reg_8() - write single byte to a register
- * @indio_dev: iio device associated with child of actual device
- * @reg_address: the address of the register to be written
- * @val: the value to write
- **/
-static int adis16203_spi_write_reg_8(struct iio_dev *indio_dev,
- u8 reg_address,
- u8 val)
-{
- int ret;
- struct adis16203_state *st = iio_priv(indio_dev);
-
- mutex_lock(&st->buf_lock);
- st->tx[0] = ADIS16203_WRITE_REG(reg_address);
- st->tx[1] = val;
-
- ret = spi_write(st->us, st->tx, 2);
- mutex_unlock(&st->buf_lock);
-
- return ret;
-}
-
-/**
- * adis16203_spi_write_reg_16() - write 2 bytes to a pair of registers
- * @indio_dev: iio device associated with child of actual device
- * @reg_address: the address of the lower of the two registers. Second register
- * is assumed to have address one greater.
- * @val: value to be written
- **/
-static int adis16203_spi_write_reg_16(struct iio_dev *indio_dev,
- u8 lower_reg_address,
- u16 value)
-{
- int ret;
- struct spi_message msg;
- struct adis16203_state *st = iio_priv(indio_dev);
- struct spi_transfer xfers[] = {
- {
- .tx_buf = st->tx,
- .bits_per_word = 8,
- .len = 2,
- .cs_change = 1,
- }, {
- .tx_buf = st->tx + 2,
- .bits_per_word = 8,
- .len = 2,
- },
- };
-
- mutex_lock(&st->buf_lock);
- st->tx[0] = ADIS16203_WRITE_REG(lower_reg_address);
- st->tx[1] = value & 0xFF;
- st->tx[2] = ADIS16203_WRITE_REG(lower_reg_address + 1);
- st->tx[3] = (value >> 8) & 0xFF;
-
- spi_message_init(&msg);
- spi_message_add_tail(&xfers[0], &msg);
- spi_message_add_tail(&xfers[1], &msg);
- ret = spi_sync(st->us, &msg);
- mutex_unlock(&st->buf_lock);
-
- return ret;
-}
-
-/**
- * adis16203_spi_read_reg_16() - read 2 bytes from a 16-bit register
- * @indio_dev: iio device associated with child of actual device
- * @reg_address: the address of the lower of the two registers. Second register
- * is assumed to have address one greater.
- * @val: somewhere to pass back the value read
- **/
-static int adis16203_spi_read_reg_16(struct iio_dev *indio_dev,
- u8 lower_reg_address,
- u16 *val)
-{
- struct spi_message msg;
- struct adis16203_state *st = iio_priv(indio_dev);
- int ret;
- struct spi_transfer xfers[] = {
- {
- .tx_buf = st->tx,
- .bits_per_word = 8,
- .len = 2,
- .cs_change = 1,
- .delay_usecs = 20,
- }, {
- .rx_buf = st->rx,
- .bits_per_word = 8,
- .len = 2,
- .delay_usecs = 20,
- },
- };
-
- mutex_lock(&st->buf_lock);
- st->tx[0] = ADIS16203_READ_REG(lower_reg_address);
- st->tx[1] = 0;
-
- spi_message_init(&msg);
- spi_message_add_tail(&xfers[0], &msg);
- spi_message_add_tail(&xfers[1], &msg);
- ret = spi_sync(st->us, &msg);
- if (ret) {
- dev_err(&st->us->dev, "problem when reading 16 bit register 0x%02X",
- lower_reg_address);
- goto error_ret;
- }
- *val = (st->rx[0] << 8) | st->rx[1];
-
-error_ret:
- mutex_unlock(&st->buf_lock);
- return ret;
-}
-
-static int adis16203_check_status(struct iio_dev *indio_dev)
-{
- u16 status;
- int ret;
-
- ret = adis16203_spi_read_reg_16(indio_dev,
- ADIS16203_DIAG_STAT,
- &status);
- if (ret < 0) {
- dev_err(&indio_dev->dev, "Reading status failed\n");
- goto error_ret;
- }
- ret = status & 0x1F;
-
- if (status & ADIS16203_DIAG_STAT_SELFTEST_FAIL)
- dev_err(&indio_dev->dev, "Self test failure\n");
- if (status & ADIS16203_DIAG_STAT_SPI_FAIL)
- dev_err(&indio_dev->dev, "SPI failure\n");
- if (status & ADIS16203_DIAG_STAT_FLASH_UPT)
- dev_err(&indio_dev->dev, "Flash update failed\n");
- if (status & ADIS16203_DIAG_STAT_POWER_HIGH)
- dev_err(&indio_dev->dev, "Power supply above 3.625V\n");
- if (status & ADIS16203_DIAG_STAT_POWER_LOW)
- dev_err(&indio_dev->dev, "Power supply below 3.15V\n");
-
-error_ret:
- return ret;
-}
-
-static int adis16203_reset(struct iio_dev *indio_dev)
-{
- int ret;
- ret = adis16203_spi_write_reg_8(indio_dev,
- ADIS16203_GLOB_CMD,
- ADIS16203_GLOB_CMD_SW_RESET);
- if (ret)
- dev_err(&indio_dev->dev, "problem resetting device");
-
- return ret;
-}
-
-int adis16203_set_irq(struct iio_dev *indio_dev, bool enable)
-{
- int ret = 0;
- u16 msc;
-
- ret = adis16203_spi_read_reg_16(indio_dev, ADIS16203_MSC_CTRL, &msc);
- if (ret)
- goto error_ret;
-
- msc |= ADIS16203_MSC_CTRL_ACTIVE_HIGH;
- msc &= ~ADIS16203_MSC_CTRL_DATA_RDY_DIO1;
- if (enable)
- msc |= ADIS16203_MSC_CTRL_DATA_RDY_EN;
- else
- msc &= ~ADIS16203_MSC_CTRL_DATA_RDY_EN;
-
- ret = adis16203_spi_write_reg_16(indio_dev, ADIS16203_MSC_CTRL, msc);
-
-error_ret:
- return ret;
-}
-
-static int adis16203_self_test(struct iio_dev *indio_dev)
-{
- int ret;
- ret = adis16203_spi_write_reg_16(indio_dev,
- ADIS16203_MSC_CTRL,
- ADIS16203_MSC_CTRL_SELF_TEST_EN);
- if (ret) {
- dev_err(&indio_dev->dev, "problem starting self test");
- goto err_ret;
- }
-
- adis16203_check_status(indio_dev);
-
-err_ret:
- return ret;
-}
-
-static int adis16203_initial_setup(struct iio_dev *indio_dev)
-{
- int ret;
-
- /* Disable IRQ */
- ret = adis16203_set_irq(indio_dev, false);
- if (ret) {
- dev_err(&indio_dev->dev, "disable irq failed");
- goto err_ret;
- }
-
- /* Do self test */
- ret = adis16203_self_test(indio_dev);
- if (ret) {
- dev_err(&indio_dev->dev, "self test failure");
- goto err_ret;
- }
-
- /* Read status register to check the result */
- ret = adis16203_check_status(indio_dev);
- if (ret) {
- adis16203_reset(indio_dev);
- dev_err(&indio_dev->dev, "device not playing ball -> reset");
- msleep(ADIS16203_STARTUP_DELAY);
- ret = adis16203_check_status(indio_dev);
- if (ret) {
- dev_err(&indio_dev->dev, "giving up");
- goto err_ret;
- }
- }
-
-err_ret:
- return ret;
-}
-
-enum adis16203_chan {
- in_supply,
- in_aux,
- incli_x,
- incli_y,
- temp,
-};
-
-static u8 adis16203_addresses[5][2] = {
- [in_supply] = { ADIS16203_SUPPLY_OUT },
- [in_aux] = { ADIS16203_AUX_ADC },
- [incli_x] = { ADIS16203_XINCL_OUT, ADIS16203_INCL_NULL},
- [incli_y] = { ADIS16203_YINCL_OUT },
- [temp] = { ADIS16203_TEMP_OUT }
+static const u8 adis16203_addresses[] = {
+ [ADIS16203_SCAN_INCLI_X] = ADIS16203_INCL_NULL,
};
static int adis16203_write_raw(struct iio_dev *indio_dev,
@@ -274,9 +34,10 @@
int val2,
long mask)
{
+ struct adis *st = iio_priv(indio_dev);
/* currently only one writable parameter which keeps this simple */
- u8 addr = adis16203_addresses[chan->address][1];
- return adis16203_spi_write_reg_16(indio_dev, addr, val & 0x3FFF);
+ u8 addr = adis16203_addresses[chan->scan_index];
+ return adis_write_reg_16(st, addr, val & 0x3FFF);
}
static int adis16203_read_raw(struct iio_dev *indio_dev,
@@ -284,35 +45,15 @@
int *val, int *val2,
long mask)
{
+ struct adis *st = iio_priv(indio_dev);
int ret;
int bits;
u8 addr;
s16 val16;
switch (mask) {
case IIO_CHAN_INFO_RAW:
- mutex_lock(&indio_dev->mlock);
- addr = adis16203_addresses[chan->address][0];
- ret = adis16203_spi_read_reg_16(indio_dev, addr, &val16);
- if (ret) {
- mutex_unlock(&indio_dev->mlock);
- return ret;
- }
-
- if (val16 & ADIS16203_ERROR_ACTIVE) {
- ret = adis16203_check_status(indio_dev);
- if (ret) {
- mutex_unlock(&indio_dev->mlock);
- return ret;
- }
- }
- val16 = val16 & ((1 << chan->scan_type.realbits) - 1);
- if (chan->scan_type.sign == 's')
- val16 = (s16)(val16 <<
- (16 - chan->scan_type.realbits)) >>
- (16 - chan->scan_type.realbits);
- *val = val16;
- mutex_unlock(&indio_dev->mlock);
- return IIO_VAL_INT;
+ return adis_single_conversion(indio_dev, chan,
+ ADIS16203_ERROR_ACTIVE, val);
case IIO_CHAN_INFO_SCALE:
switch (chan->type) {
case IIO_VOLTAGE:
@@ -341,8 +82,8 @@
case IIO_CHAN_INFO_CALIBBIAS:
bits = 14;
mutex_lock(&indio_dev->mlock);
- addr = adis16203_addresses[chan->address][1];
- ret = adis16203_spi_read_reg_16(indio_dev, addr, &val16);
+ addr = adis16203_addresses[chan->scan_index];
+ ret = adis_read_reg_16(st, addr, &val16);
if (ret) {
mutex_unlock(&indio_dev->mlock);
return ret;
@@ -358,89 +99,53 @@
}
static const struct iio_chan_spec adis16203_channels[] = {
- {
- .type = IIO_VOLTAGE,
- .indexed = 1,
- .channel = 0,
- .extend_name = "supply",
- .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
- IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
- .address = in_supply,
- .scan_index = ADIS16203_SCAN_SUPPLY,
- .scan_type = {
- .sign = 'u',
- .realbits = 12,
- .storagebits = 16,
- },
- }, {
- .type = IIO_VOLTAGE,
- .indexed = 1,
- .channel = 1,
- .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
- IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
- .address = in_aux,
- .scan_index = ADIS16203_SCAN_AUX_ADC,
- .scan_type = {
- .sign = 'u',
- .realbits = 12,
- .storagebits = 16,
- },
- }, {
- .type = IIO_INCLI,
- .modified = 1,
- .channel2 = IIO_MOD_X,
- .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
- IIO_CHAN_INFO_SCALE_SHARED_BIT |
- IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT,
- .address = incli_x,
- .scan_index = ADIS16203_SCAN_INCLI_X,
- .scan_type = {
- .sign = 's',
- .realbits = 14,
- .storagebits = 16,
- },
- }, { /* Fixme: Not what it appears to be - see data sheet */
- .type = IIO_INCLI,
- .modified = 1,
- .channel2 = IIO_MOD_Y,
- .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
- IIO_CHAN_INFO_SCALE_SHARED_BIT,
- .address = incli_y,
- .scan_index = ADIS16203_SCAN_INCLI_Y,
- .scan_type = {
- .sign = 's',
- .realbits = 14,
- .storagebits = 16,
- },
- }, {
- .type = IIO_TEMP,
- .indexed = 1,
- .channel = 0,
- .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
- IIO_CHAN_INFO_SCALE_SEPARATE_BIT |
- IIO_CHAN_INFO_OFFSET_SEPARATE_BIT,
- .address = temp,
- .scan_index = ADIS16203_SCAN_TEMP,
- .scan_type = {
- .sign = 'u',
- .realbits = 12,
- .storagebits = 16,
- },
- },
+ ADIS_SUPPLY_CHAN(ADIS16203_SUPPLY_OUT, ADIS16203_SCAN_SUPPLY, 12),
+ ADIS_AUX_ADC_CHAN(ADIS16203_AUX_ADC, ADIS16203_SCAN_AUX_ADC, 12),
+ ADIS_INCLI_CHAN(X, ADIS16203_XINCL_OUT, ADIS16203_SCAN_INCLI_X,
+ IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT, 14),
+ /* Fixme: Not what it appears to be - see data sheet */
+ ADIS_INCLI_CHAN(Y, ADIS16203_YINCL_OUT, ADIS16203_SCAN_INCLI_Y, 0, 14),
+ ADIS_TEMP_CHAN(ADIS16203_TEMP_OUT, ADIS16203_SCAN_TEMP, 12),
IIO_CHAN_SOFT_TIMESTAMP(5),
};
static const struct iio_info adis16203_info = {
.read_raw = &adis16203_read_raw,
.write_raw = &adis16203_write_raw,
+ .update_scan_mode = adis_update_scan_mode,
.driver_module = THIS_MODULE,
};
-static int __devinit adis16203_probe(struct spi_device *spi)
+static const char * const adis16203_status_error_msgs[] = {
+ [ADIS16203_DIAG_STAT_SELFTEST_FAIL_BIT] = "Self test failure",
+ [ADIS16203_DIAG_STAT_SPI_FAIL_BIT] = "SPI failure",
+ [ADIS16203_DIAG_STAT_FLASH_UPT_BIT] = "Flash update failed",
+ [ADIS16203_DIAG_STAT_POWER_HIGH_BIT] = "Power supply above 3.625V",
+ [ADIS16203_DIAG_STAT_POWER_LOW_BIT] = "Power supply below 3.15V",
+};
+
+static const struct adis_data adis16203_data = {
+ .read_delay = 20,
+ .msc_ctrl_reg = ADIS16203_MSC_CTRL,
+ .glob_cmd_reg = ADIS16203_GLOB_CMD,
+ .diag_stat_reg = ADIS16203_DIAG_STAT,
+
+ .self_test_mask = ADIS16203_MSC_CTRL_SELF_TEST_EN,
+ .startup_delay = ADIS16203_STARTUP_DELAY,
+
+ .status_error_msgs = adis16203_status_error_msgs,
+ .status_error_mask = BIT(ADIS16203_DIAG_STAT_SELFTEST_FAIL_BIT) |
+ BIT(ADIS16203_DIAG_STAT_SPI_FAIL_BIT) |
+ BIT(ADIS16203_DIAG_STAT_FLASH_UPT_BIT) |
+ BIT(ADIS16203_DIAG_STAT_POWER_HIGH_BIT) |
+ BIT(ADIS16203_DIAG_STAT_POWER_LOW_BIT),
+};
+
+static int adis16203_probe(struct spi_device *spi)
{
int ret;
struct iio_dev *indio_dev;
- struct adis16203_state *st;
+ struct adis *st;
/* setup the industrialio driver allocated elements */
indio_dev = iio_device_alloc(sizeof(*st));
@@ -451,8 +156,6 @@
st = iio_priv(indio_dev);
/* this is only used for removal purposes */
spi_set_drvdata(spi, indio_dev);
- st->us = spi;
- mutex_init(&st->buf_lock);
indio_dev->name = spi->dev.driver->name;
indio_dev->dev.parent = &spi->dev;
@@ -461,55 +164,40 @@
indio_dev->info = &adis16203_info;
indio_dev->modes = INDIO_DIRECT_MODE;
- ret = adis16203_configure_ring(indio_dev);
+ ret = adis_init(st, indio_dev, spi, &adis16203_data);
if (ret)
goto error_free_dev;
- ret = iio_buffer_register(indio_dev,
- adis16203_channels,
- ARRAY_SIZE(adis16203_channels));
- if (ret) {
- printk(KERN_ERR "failed to initialize the ring\n");
- goto error_unreg_ring_funcs;
- }
-
- if (spi->irq) {
- ret = adis16203_probe_trigger(indio_dev);
- if (ret)
- goto error_uninitialize_ring;
- }
+ ret = adis_setup_buffer_and_trigger(st, indio_dev, NULL);
+ if (ret)
+ goto error_free_dev;
/* Get the device into a sane initial state */
- ret = adis16203_initial_setup(indio_dev);
+ ret = adis_initial_startup(st);
if (ret)
- goto error_remove_trigger;
+ goto error_cleanup_buffer_trigger;
ret = iio_device_register(indio_dev);
if (ret)
- goto error_remove_trigger;
+ goto error_cleanup_buffer_trigger;
return 0;
-error_remove_trigger:
- adis16203_remove_trigger(indio_dev);
-error_uninitialize_ring:
- iio_buffer_unregister(indio_dev);
-error_unreg_ring_funcs:
- adis16203_unconfigure_ring(indio_dev);
+error_cleanup_buffer_trigger:
+ adis_cleanup_buffer_and_trigger(st, indio_dev);
error_free_dev:
iio_device_free(indio_dev);
error_ret:
return ret;
}
-static int __devexit adis16203_remove(struct spi_device *spi)
+static int adis16203_remove(struct spi_device *spi)
{
struct iio_dev *indio_dev = spi_get_drvdata(spi);
+ struct adis *st = iio_priv(indio_dev);
iio_device_unregister(indio_dev);
- adis16203_remove_trigger(indio_dev);
- iio_buffer_unregister(indio_dev);
- adis16203_unconfigure_ring(indio_dev);
+ adis_cleanup_buffer_and_trigger(st, indio_dev);
iio_device_free(indio_dev);
return 0;
@@ -521,7 +209,7 @@
.owner = THIS_MODULE,
},
.probe = adis16203_probe,
- .remove = __devexit_p(adis16203_remove),
+ .remove = adis16203_remove,
};
module_spi_driver(adis16203_driver);
diff --git a/drivers/staging/iio/accel/adis16203_ring.c b/drivers/staging/iio/accel/adis16203_ring.c
deleted file mode 100644
index 7507e1a..0000000
--- a/drivers/staging/iio/accel/adis16203_ring.c
+++ /dev/null
@@ -1,136 +0,0 @@
-#include <linux/export.h>
-#include <linux/interrupt.h>
-#include <linux/mutex.h>
-#include <linux/kernel.h>
-#include <linux/spi/spi.h>
-#include <linux/slab.h>
-
-#include <linux/iio/iio.h>
-#include "../ring_sw.h"
-#include <linux/iio/trigger_consumer.h>
-#include "adis16203.h"
-
-/**
- * adis16203_read_ring_data() read data registers which will be placed into ring
- * @indio_dev: the IIO device
- * @rx: somewhere to pass back the value read
- **/
-static int adis16203_read_ring_data(struct iio_dev *indio_dev, u8 *rx)
-{
- struct spi_message msg;
- struct adis16203_state *st = iio_priv(indio_dev);
- struct spi_transfer xfers[ADIS16203_OUTPUTS + 1];
- int ret;
- int i;
-
- mutex_lock(&st->buf_lock);
-
- spi_message_init(&msg);
-
- memset(xfers, 0, sizeof(xfers));
- for (i = 0; i <= ADIS16203_OUTPUTS; i++) {
- xfers[i].bits_per_word = 8;
- xfers[i].cs_change = 1;
- xfers[i].len = 2;
- xfers[i].delay_usecs = 20;
- xfers[i].tx_buf = st->tx + 2 * i;
- if (i < 1) /* SUPPLY_OUT: 0x02, AUX_ADC: 0x08 */
- st->tx[2 * i] = ADIS16203_READ_REG(ADIS16203_SUPPLY_OUT + 2 * i);
- else
- st->tx[2 * i] = ADIS16203_READ_REG(ADIS16203_SUPPLY_OUT + 2 * i + 6);
- st->tx[2 * i + 1] = 0;
- if (i >= 1)
- xfers[i].rx_buf = rx + 2 * (i - 1);
- spi_message_add_tail(&xfers[i], &msg);
- }
-
- ret = spi_sync(st->us, &msg);
- if (ret)
- dev_err(&st->us->dev, "problem when burst reading");
-
- mutex_unlock(&st->buf_lock);
-
- return ret;
-}
-
-/* Whilst this makes a lot of calls to iio_sw_ring functions - it is to device
- * specific to be rolled into the core.
- */
-static irqreturn_t adis16203_trigger_handler(int irq, void *p)
-{
- struct iio_poll_func *pf = p;
- struct iio_dev *indio_dev = pf->indio_dev;
- struct adis16203_state *st = iio_priv(indio_dev);
-
- int i = 0;
- s16 *data;
-
- data = kmalloc(indio_dev->scan_bytes, GFP_KERNEL);
- if (data == NULL) {
- dev_err(&st->us->dev, "memory alloc failed in ring bh");
- goto done;
- }
-
- if (!bitmap_empty(indio_dev->active_scan_mask, indio_dev->masklength) &&
- adis16203_read_ring_data(indio_dev, st->rx) >= 0)
- for (; i < bitmap_weight(indio_dev->active_scan_mask,
- indio_dev->masklength); i++)
- data[i] = be16_to_cpup((__be16 *)&(st->rx[i*2]));
-
- /* Guaranteed to be aligned with 8 byte boundary */
- if (indio_dev->scan_timestamp)
- *((s64 *)(data + ((i + 3)/4)*4)) = pf->timestamp;
-
- iio_push_to_buffer(indio_dev->buffer, (u8 *)data);
-
- kfree(data);
-done:
- iio_trigger_notify_done(indio_dev->trig);
-
- return IRQ_HANDLED;
-}
-
-void adis16203_unconfigure_ring(struct iio_dev *indio_dev)
-{
- iio_dealloc_pollfunc(indio_dev->pollfunc);
- iio_sw_rb_free(indio_dev->buffer);
-}
-
-static const struct iio_buffer_setup_ops adis16203_ring_setup_ops = {
- .preenable = &iio_sw_buffer_preenable,
- .postenable = &iio_triggered_buffer_postenable,
- .predisable = &iio_triggered_buffer_predisable,
-};
-
-int adis16203_configure_ring(struct iio_dev *indio_dev)
-{
- int ret = 0;
- struct iio_buffer *ring;
-
- ring = iio_sw_rb_allocate(indio_dev);
- if (!ring) {
- ret = -ENOMEM;
- return ret;
- }
- indio_dev->buffer = ring;
- ring->scan_timestamp = true;
- indio_dev->setup_ops = &adis16203_ring_setup_ops;
-
- indio_dev->pollfunc = iio_alloc_pollfunc(&iio_pollfunc_store_time,
- &adis16203_trigger_handler,
- IRQF_ONESHOT,
- indio_dev,
- "adis16203_consumer%d",
- indio_dev->id);
- if (indio_dev->pollfunc == NULL) {
- ret = -ENOMEM;
- goto error_iio_sw_rb_free;
- }
-
- indio_dev->modes |= INDIO_BUFFER_TRIGGERED;
- return 0;
-
-error_iio_sw_rb_free:
- iio_sw_rb_free(indio_dev->buffer);
- return ret;
-}
diff --git a/drivers/staging/iio/accel/adis16203_trigger.c b/drivers/staging/iio/accel/adis16203_trigger.c
deleted file mode 100644
index b8a0407..0000000
--- a/drivers/staging/iio/accel/adis16203_trigger.c
+++ /dev/null
@@ -1,73 +0,0 @@
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/spi/spi.h>
-#include <linux/export.h>
-
-#include <linux/iio/iio.h>
-#include <linux/iio/trigger.h>
-#include "adis16203.h"
-
-/**
- * adis16203_data_rdy_trigger_set_state() set datardy interrupt state
- **/
-static int adis16203_data_rdy_trigger_set_state(struct iio_trigger *trig,
- bool state)
-{
- struct iio_dev *indio_dev = trig->private_data;
-
- dev_dbg(&indio_dev->dev, "%s (%d)\n", __func__, state);
- return adis16203_set_irq(indio_dev, state);
-}
-
-static const struct iio_trigger_ops adis16203_trigger_ops = {
- .owner = THIS_MODULE,
- .set_trigger_state = &adis16203_data_rdy_trigger_set_state,
-};
-
-int adis16203_probe_trigger(struct iio_dev *indio_dev)
-{
- int ret;
- struct adis16203_state *st = iio_priv(indio_dev);
-
- st->trig = iio_trigger_alloc("adis16203-dev%d", indio_dev->id);
- if (st->trig == NULL) {
- ret = -ENOMEM;
- goto error_ret;
- }
-
- ret = request_irq(st->us->irq,
- &iio_trigger_generic_data_rdy_poll,
- IRQF_TRIGGER_RISING,
- "adis16203",
- st->trig);
- if (ret)
- goto error_free_trig;
-
- st->trig->dev.parent = &st->us->dev;
- st->trig->ops = &adis16203_trigger_ops;
- st->trig->private_data = indio_dev;
- ret = iio_trigger_register(st->trig);
-
- /* select default trigger */
- indio_dev->trig = st->trig;
- if (ret)
- goto error_free_irq;
-
- return 0;
-
-error_free_irq:
- free_irq(st->us->irq, st->trig);
-error_free_trig:
- iio_trigger_free(st->trig);
-error_ret:
- return ret;
-}
-
-void adis16203_remove_trigger(struct iio_dev *indio_dev)
-{
- struct adis16203_state *st = iio_priv(indio_dev);
-
- iio_trigger_unregister(st->trig);
- free_irq(st->us->irq, st->trig);
- iio_trigger_free(st->trig);
-}
diff --git a/drivers/staging/iio/accel/adis16204.h b/drivers/staging/iio/accel/adis16204.h
index 7cf4e91..9ff950c 100644
--- a/drivers/staging/iio/accel/adis16204.h
+++ b/drivers/staging/iio/accel/adis16204.h
@@ -3,9 +3,6 @@
#define ADIS16204_STARTUP_DELAY 220 /* ms */
-#define ADIS16204_READ_REG(a) a
-#define ADIS16204_WRITE_REG(a) ((a) | 0x80)
-
#define ADIS16204_FLASH_CNT 0x00 /* Flash memory write count */
#define ADIS16204_SUPPLY_OUT 0x02 /* Output, power supply */
#define ADIS16204_XACCL_OUT 0x04 /* Output, x-axis accelerometer */
@@ -35,8 +32,6 @@
#define ADIS16204_DIAG_STAT 0x3C /* Diagnostics, system status register */
#define ADIS16204_GLOB_CMD 0x3E /* Operation, system command register */
-#define ADIS16204_OUTPUTS 5
-
/* MSC_CTRL */
#define ADIS16204_MSC_CTRL_PWRUP_SELF_TEST (1 << 10) /* Self-test at power-on: 1 = disabled, 0 = enabled */
#define ADIS16204_MSC_CTRL_SELF_TEST_EN (1 << 8) /* Self-test enable */
@@ -47,87 +42,27 @@
/* DIAG_STAT */
#define ADIS16204_DIAG_STAT_ALARM2 (1<<9) /* Alarm 2 status: 1 = alarm active, 0 = alarm inactive */
#define ADIS16204_DIAG_STAT_ALARM1 (1<<8) /* Alarm 1 status: 1 = alarm active, 0 = alarm inactive */
-#define ADIS16204_DIAG_STAT_SELFTEST_FAIL (1<<5) /* Self-test diagnostic error flag: 1 = error condition,
+#define ADIS16204_DIAG_STAT_SELFTEST_FAIL_BIT 5 /* Self-test diagnostic error flag: 1 = error condition,
0 = normal operation */
-#define ADIS16204_DIAG_STAT_SPI_FAIL (1<<3) /* SPI communications failure */
-#define ADIS16204_DIAG_STAT_FLASH_UPT (1<<2) /* Flash update failure */
-#define ADIS16204_DIAG_STAT_POWER_HIGH (1<<1) /* Power supply above 3.625 V */
-#define ADIS16204_DIAG_STAT_POWER_LOW (1<<0) /* Power supply below 2.975 V */
+#define ADIS16204_DIAG_STAT_SPI_FAIL_BIT 3 /* SPI communications failure */
+#define ADIS16204_DIAG_STAT_FLASH_UPT_BIT 2 /* Flash update failure */
+#define ADIS16204_DIAG_STAT_POWER_HIGH_BIT 1 /* Power supply above 3.625 V */
+#define ADIS16204_DIAG_STAT_POWER_LOW_BIT 0 /* Power supply below 2.975 V */
/* GLOB_CMD */
#define ADIS16204_GLOB_CMD_SW_RESET (1<<7)
#define ADIS16204_GLOB_CMD_CLEAR_STAT (1<<4)
#define ADIS16204_GLOB_CMD_FACTORY_CAL (1<<1)
-#define ADIS16204_MAX_TX 24
-#define ADIS16204_MAX_RX 24
-
#define ADIS16204_ERROR_ACTIVE (1<<14)
-/**
- * struct adis16204_state - device instance specific data
- * @us: actual spi_device
- * @trig: data ready trigger registered with iio
- * @tx: transmit buffer
- * @rx: receive buffer
- * @buf_lock: mutex to protect tx and rx
- **/
-struct adis16204_state {
- struct spi_device *us;
- struct iio_trigger *trig;
- struct mutex buf_lock;
- u8 tx[ADIS16204_MAX_TX] ____cacheline_aligned;
- u8 rx[ADIS16204_MAX_RX];
-};
-
-int adis16204_set_irq(struct iio_dev *indio_dev, bool enable);
-
enum adis16204_scan {
- ADIS16204_SCAN_SUPPLY,
ADIS16204_SCAN_ACC_X,
ADIS16204_SCAN_ACC_Y,
+ ADIS16204_SCAN_ACC_XY,
+ ADIS16204_SCAN_SUPPLY,
ADIS16204_SCAN_AUX_ADC,
ADIS16204_SCAN_TEMP,
};
-#ifdef CONFIG_IIO_BUFFER
-void adis16204_remove_trigger(struct iio_dev *indio_dev);
-int adis16204_probe_trigger(struct iio_dev *indio_dev);
-
-ssize_t adis16204_read_data_from_ring(struct device *dev,
- struct device_attribute *attr,
- char *buf);
-
-int adis16204_configure_ring(struct iio_dev *indio_dev);
-void adis16204_unconfigure_ring(struct iio_dev *indio_dev);
-
-#else /* CONFIG_IIO_BUFFER */
-
-static inline void adis16204_remove_trigger(struct iio_dev *indio_dev)
-{
-}
-
-static inline int adis16204_probe_trigger(struct iio_dev *indio_dev)
-{
- return 0;
-}
-
-static inline ssize_t
-adis16204_read_data_from_ring(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- return 0;
-}
-
-static int adis16204_configure_ring(struct iio_dev *indio_dev)
-{
- return 0;
-}
-
-static inline void adis16204_unconfigure_ring(struct iio_dev *indio_dev)
-{
-}
-
-#endif /* CONFIG_IIO_BUFFER */
#endif /* SPI_ADIS16204_H_ */
diff --git a/drivers/staging/iio/accel/adis16204_core.c b/drivers/staging/iio/accel/adis16204_core.c
index c6234c2..f359266 100644
--- a/drivers/staging/iio/accel/adis16204_core.c
+++ b/drivers/staging/iio/accel/adis16204_core.c
@@ -21,261 +21,16 @@
#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
#include <linux/iio/buffer.h>
+#include <linux/iio/imu/adis.h>
#include "adis16204.h"
-#define DRIVER_NAME "adis16204"
-
-/**
- * adis16204_spi_write_reg_8() - write single byte to a register
- * @dev: device associated with child of actual device (iio_dev or iio_trig)
- * @reg_address: the address of the register to be written
- * @val: the value to write
- **/
-static int adis16204_spi_write_reg_8(struct iio_dev *indio_dev,
- u8 reg_address,
- u8 val)
-{
- int ret;
- struct adis16204_state *st = iio_priv(indio_dev);
-
- mutex_lock(&st->buf_lock);
- st->tx[0] = ADIS16204_WRITE_REG(reg_address);
- st->tx[1] = val;
-
- ret = spi_write(st->us, st->tx, 2);
- mutex_unlock(&st->buf_lock);
-
- return ret;
-}
-
-/**
- * adis16204_spi_write_reg_16() - write 2 bytes to a pair of registers
- * @indio_dev: iio device associated with child of actual device
- * @reg_address: the address of the lower of the two registers. Second register
- * is assumed to have address one greater.
- * @val: value to be written
- **/
-static int adis16204_spi_write_reg_16(struct iio_dev *indio_dev,
- u8 lower_reg_address,
- u16 value)
-{
- int ret;
- struct spi_message msg;
- struct adis16204_state *st = iio_priv(indio_dev);
- struct spi_transfer xfers[] = {
- {
- .tx_buf = st->tx,
- .bits_per_word = 8,
- .len = 2,
- .cs_change = 1,
- }, {
- .tx_buf = st->tx + 2,
- .bits_per_word = 8,
- .len = 2,
- .cs_change = 1,
- },
- };
-
- mutex_lock(&st->buf_lock);
- st->tx[0] = ADIS16204_WRITE_REG(lower_reg_address);
- st->tx[1] = value & 0xFF;
- st->tx[2] = ADIS16204_WRITE_REG(lower_reg_address + 1);
- st->tx[3] = (value >> 8) & 0xFF;
-
- spi_message_init(&msg);
- spi_message_add_tail(&xfers[0], &msg);
- spi_message_add_tail(&xfers[1], &msg);
- ret = spi_sync(st->us, &msg);
- mutex_unlock(&st->buf_lock);
-
- return ret;
-}
-
-/**
- * adis16204_spi_read_reg_16() - read 2 bytes from a 16-bit register
- * @indio_dev: iio device associated with child of actual device
- * @reg_address: the address of the lower of the two registers. Second register
- * is assumed to have address one greater.
- * @val: somewhere to pass back the value read
- **/
-static int adis16204_spi_read_reg_16(struct iio_dev *indio_dev,
- u8 lower_reg_address,
- u16 *val)
-{
- struct spi_message msg;
- struct adis16204_state *st = iio_priv(indio_dev);
- int ret;
- struct spi_transfer xfers[] = {
- {
- .tx_buf = st->tx,
- .bits_per_word = 8,
- .len = 2,
- .cs_change = 1,
- .delay_usecs = 20,
- }, {
- .rx_buf = st->rx,
- .bits_per_word = 8,
- .len = 2,
- .delay_usecs = 20,
- },
- };
-
- mutex_lock(&st->buf_lock);
- st->tx[0] = ADIS16204_READ_REG(lower_reg_address);
- st->tx[1] = 0;
-
- spi_message_init(&msg);
- spi_message_add_tail(&xfers[0], &msg);
- spi_message_add_tail(&xfers[1], &msg);
- ret = spi_sync(st->us, &msg);
- if (ret) {
- dev_err(&st->us->dev, "problem when reading 16 bit register 0x%02X",
- lower_reg_address);
- goto error_ret;
- }
- *val = (st->rx[0] << 8) | st->rx[1];
-
-error_ret:
- mutex_unlock(&st->buf_lock);
- return ret;
-}
-
-static int adis16204_check_status(struct iio_dev *indio_dev)
-{
- u16 status;
- int ret;
-
- ret = adis16204_spi_read_reg_16(indio_dev,
- ADIS16204_DIAG_STAT, &status);
- if (ret < 0) {
- dev_err(&indio_dev->dev, "Reading status failed\n");
- goto error_ret;
- }
- ret = status & 0x1F;
-
- if (status & ADIS16204_DIAG_STAT_SELFTEST_FAIL)
- dev_err(&indio_dev->dev, "Self test failure\n");
- if (status & ADIS16204_DIAG_STAT_SPI_FAIL)
- dev_err(&indio_dev->dev, "SPI failure\n");
- if (status & ADIS16204_DIAG_STAT_FLASH_UPT)
- dev_err(&indio_dev->dev, "Flash update failed\n");
- if (status & ADIS16204_DIAG_STAT_POWER_HIGH)
- dev_err(&indio_dev->dev, "Power supply above 3.625V\n");
- if (status & ADIS16204_DIAG_STAT_POWER_LOW)
- dev_err(&indio_dev->dev, "Power supply below 2.975V\n");
-
-error_ret:
- return ret;
-}
-
-static int adis16204_reset(struct iio_dev *indio_dev)
-{
- int ret;
- ret = adis16204_spi_write_reg_8(indio_dev,
- ADIS16204_GLOB_CMD,
- ADIS16204_GLOB_CMD_SW_RESET);
- if (ret)
- dev_err(&indio_dev->dev, "problem resetting device");
-
- return ret;
-}
-
-int adis16204_set_irq(struct iio_dev *indio_dev, bool enable)
-{
- int ret = 0;
- u16 msc;
-
- ret = adis16204_spi_read_reg_16(indio_dev, ADIS16204_MSC_CTRL, &msc);
- if (ret)
- goto error_ret;
-
- msc |= ADIS16204_MSC_CTRL_ACTIVE_HIGH;
- msc &= ~ADIS16204_MSC_CTRL_DATA_RDY_DIO2;
- if (enable)
- msc |= ADIS16204_MSC_CTRL_DATA_RDY_EN;
- else
- msc &= ~ADIS16204_MSC_CTRL_DATA_RDY_EN;
-
- ret = adis16204_spi_write_reg_16(indio_dev, ADIS16204_MSC_CTRL, msc);
-
-error_ret:
- return ret;
-}
-
-static int adis16204_self_test(struct iio_dev *indio_dev)
-{
- int ret;
- ret = adis16204_spi_write_reg_16(indio_dev,
- ADIS16204_MSC_CTRL,
- ADIS16204_MSC_CTRL_SELF_TEST_EN);
- if (ret) {
- dev_err(&indio_dev->dev, "problem starting self test");
- goto err_ret;
- }
-
- adis16204_check_status(indio_dev);
-
-err_ret:
- return ret;
-}
-
-static int adis16204_initial_setup(struct iio_dev *indio_dev)
-{
- int ret;
-
- /* Disable IRQ */
- ret = adis16204_set_irq(indio_dev, false);
- if (ret) {
- dev_err(&indio_dev->dev, "disable irq failed");
- goto err_ret;
- }
-
- /* Do self test */
- ret = adis16204_self_test(indio_dev);
- if (ret) {
- dev_err(&indio_dev->dev, "self test failure");
- goto err_ret;
- }
-
- /* Read status register to check the result */
- ret = adis16204_check_status(indio_dev);
- if (ret) {
- adis16204_reset(indio_dev);
- dev_err(&indio_dev->dev, "device not playing ball -> reset");
- msleep(ADIS16204_STARTUP_DELAY);
- ret = adis16204_check_status(indio_dev);
- if (ret) {
- dev_err(&indio_dev->dev, "giving up");
- goto err_ret;
- }
- }
-
-err_ret:
- return ret;
-}
-
/* Unique to this driver currently */
-enum adis16204_channel {
- in_supply,
- in_aux,
- temp,
- accel_x,
- accel_y,
- accel_xy,
-};
-
-static u8 adis16204_addresses[6][3] = {
- [in_supply] = { ADIS16204_SUPPLY_OUT },
- [in_aux] = { ADIS16204_AUX_ADC },
- [temp] = { ADIS16204_TEMP_OUT },
- [accel_x] = { ADIS16204_XACCL_OUT, ADIS16204_XACCL_NULL,
- ADIS16204_X_PEAK_OUT },
- [accel_y] = { ADIS16204_XACCL_OUT, ADIS16204_YACCL_NULL,
- ADIS16204_Y_PEAK_OUT },
- [accel_xy] = { ADIS16204_XY_RSS_OUT, 0,
- ADIS16204_XY_PEAK_OUT },
+static const u8 adis16204_addresses[][2] = {
+ [ADIS16204_SCAN_ACC_X] = { ADIS16204_XACCL_NULL, ADIS16204_X_PEAK_OUT },
+ [ADIS16204_SCAN_ACC_Y] = { ADIS16204_YACCL_NULL, ADIS16204_Y_PEAK_OUT },
+ [ADIS16204_SCAN_ACC_XY] = { 0, ADIS16204_XY_PEAK_OUT },
};
static int adis16204_read_raw(struct iio_dev *indio_dev,
@@ -283,6 +38,7 @@
int *val, int *val2,
long mask)
{
+ struct adis *st = iio_priv(indio_dev);
int ret;
int bits;
u8 addr;
@@ -291,29 +47,8 @@
switch (mask) {
case IIO_CHAN_INFO_RAW:
- mutex_lock(&indio_dev->mlock);
- addr = adis16204_addresses[chan->address][0];
- ret = adis16204_spi_read_reg_16(indio_dev, addr, &val16);
- if (ret) {
- mutex_unlock(&indio_dev->mlock);
- return ret;
- }
-
- if (val16 & ADIS16204_ERROR_ACTIVE) {
- ret = adis16204_check_status(indio_dev);
- if (ret) {
- mutex_unlock(&indio_dev->mlock);
- return ret;
- }
- }
- val16 = val16 & ((1 << chan->scan_type.realbits) - 1);
- if (chan->scan_type.sign == 's')
- val16 = (s16)(val16 <<
- (16 - chan->scan_type.realbits)) >>
- (16 - chan->scan_type.realbits);
- *val = val16;
- mutex_unlock(&indio_dev->mlock);
- return IIO_VAL_INT;
+ return adis_single_conversion(indio_dev, chan,
+ ADIS16204_ERROR_ACTIVE, val);
case IIO_CHAN_INFO_SCALE:
switch (chan->type) {
case IIO_VOLTAGE:
@@ -353,14 +88,14 @@
case IIO_CHAN_INFO_PEAK:
if (mask == IIO_CHAN_INFO_CALIBBIAS) {
bits = 12;
- addrind = 1;
+ addrind = 0;
} else { /* PEAK_SEPARATE */
bits = 14;
- addrind = 2;
+ addrind = 1;
}
mutex_lock(&indio_dev->mlock);
- addr = adis16204_addresses[chan->address][addrind];
- ret = adis16204_spi_read_reg_16(indio_dev, addr, &val16);
+ addr = adis16204_addresses[chan->scan_index][addrind];
+ ret = adis_read_reg_16(st, addr, &val16);
if (ret) {
mutex_unlock(&indio_dev->mlock);
return ret;
@@ -380,6 +115,7 @@
int val2,
long mask)
{
+ struct adis *st = iio_priv(indio_dev);
int bits;
s16 val16;
u8 addr;
@@ -391,114 +127,65 @@
break;
default:
return -EINVAL;
- };
+ }
val16 = val & ((1 << bits) - 1);
- addr = adis16204_addresses[chan->address][1];
- return adis16204_spi_write_reg_16(indio_dev, addr, val16);
+ addr = adis16204_addresses[chan->scan_index][1];
+ return adis_write_reg_16(st, addr, val16);
}
return -EINVAL;
}
static const struct iio_chan_spec adis16204_channels[] = {
- {
- .type = IIO_VOLTAGE,
- .indexed = 1, /* Note was not previously indexed */
- .channel = 0,
- .extend_name = "supply",
- .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
- IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
- .address = in_supply,
- .scan_index = ADIS16204_SCAN_SUPPLY,
- .scan_type = {
- .sign = 'u',
- .realbits = 12,
- .storagebits = 16,
- },
- }, {
- .type = IIO_VOLTAGE,
- .indexed = 1,
- .channel = 1,
- .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
- IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
- .address = in_aux,
- .scan_index = ADIS16204_SCAN_AUX_ADC,
- .scan_type = {
- .sign = 'u',
- .realbits = 12,
- .storagebits = 16,
- },
- }, {
- .type = IIO_TEMP,
- .indexed = 1,
- .channel = 0,
- .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
- IIO_CHAN_INFO_SCALE_SEPARATE_BIT |
- IIO_CHAN_INFO_OFFSET_SEPARATE_BIT,
- .address = temp,
- .scan_index = ADIS16204_SCAN_TEMP,
- .scan_type = {
- .sign = 'u',
- .realbits = 12,
- .storagebits = 16,
- },
- }, {
- .type = IIO_ACCEL,
- .modified = 1,
- .channel2 = IIO_MOD_X,
- .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
- IIO_CHAN_INFO_SCALE_SEPARATE_BIT |
+ ADIS_SUPPLY_CHAN(ADIS16204_SUPPLY_OUT, ADIS16204_SCAN_SUPPLY, 12),
+ ADIS_AUX_ADC_CHAN(ADIS16204_AUX_ADC, ADIS16204_SCAN_AUX_ADC, 12),
+ ADIS_TEMP_CHAN(ADIS16204_TEMP_OUT, ADIS16204_SCAN_TEMP, 12),
+ ADIS_ACCEL_CHAN(X, ADIS16204_XACCL_OUT, ADIS16204_SCAN_ACC_X,
IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
- IIO_CHAN_INFO_PEAK_SEPARATE_BIT,
- .address = accel_x,
- .scan_index = ADIS16204_SCAN_ACC_X,
- .scan_type = {
- .sign = 's',
- .realbits = 14,
- .storagebits = 16,
- },
- }, {
- .type = IIO_ACCEL,
- .modified = 1,
- .channel2 = IIO_MOD_Y,
- .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
- IIO_CHAN_INFO_SCALE_SEPARATE_BIT |
+ IIO_CHAN_INFO_PEAK_SEPARATE_BIT, 14),
+ ADIS_ACCEL_CHAN(Y, ADIS16204_YACCL_OUT, ADIS16204_SCAN_ACC_Y,
IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
- IIO_CHAN_INFO_PEAK_SEPARATE_BIT,
- .address = accel_y,
- .scan_index = ADIS16204_SCAN_ACC_Y,
- .scan_type = {
- .sign = 's',
- .realbits = 14,
- .storagebits = 16,
- },
- },
+ IIO_CHAN_INFO_PEAK_SEPARATE_BIT, 14),
+ ADIS_ACCEL_CHAN(ROOT_SUM_SQUARED_X_Y, ADIS16204_XY_RSS_OUT,
+ ADIS16204_SCAN_ACC_XY, IIO_CHAN_INFO_PEAK_SEPARATE_BIT, 14),
IIO_CHAN_SOFT_TIMESTAMP(5),
- {
- .type = IIO_ACCEL,
- .modified = 1,
- .channel2 = IIO_MOD_ROOT_SUM_SQUARED_X_Y,
- .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
- IIO_CHAN_INFO_SCALE_SEPARATE_BIT |
- IIO_CHAN_INFO_PEAK_SEPARATE_BIT,
- .address = accel_xy,
- .scan_type = {
- .sign = 'u',
- .realbits = 14,
- .storagebits = 16,
- },
- }
};
static const struct iio_info adis16204_info = {
.read_raw = &adis16204_read_raw,
.write_raw = &adis16204_write_raw,
+ .update_scan_mode = adis_update_scan_mode,
.driver_module = THIS_MODULE,
};
-static int __devinit adis16204_probe(struct spi_device *spi)
+static const char * const adis16204_status_error_msgs[] = {
+ [ADIS16204_DIAG_STAT_SELFTEST_FAIL_BIT] = "Self test failure",
+ [ADIS16204_DIAG_STAT_SPI_FAIL_BIT] = "SPI failure",
+ [ADIS16204_DIAG_STAT_FLASH_UPT_BIT] = "Flash update failed",
+ [ADIS16204_DIAG_STAT_POWER_HIGH_BIT] = "Power supply above 3.625V",
+ [ADIS16204_DIAG_STAT_POWER_LOW_BIT] = "Power supply below 2.975V",
+};
+
+static const struct adis_data adis16204_data = {
+ .read_delay = 20,
+ .msc_ctrl_reg = ADIS16204_MSC_CTRL,
+ .glob_cmd_reg = ADIS16204_GLOB_CMD,
+ .diag_stat_reg = ADIS16204_DIAG_STAT,
+
+ .self_test_mask = ADIS16204_MSC_CTRL_SELF_TEST_EN,
+ .startup_delay = ADIS16204_STARTUP_DELAY,
+
+ .status_error_msgs = adis16204_status_error_msgs,
+ .status_error_mask = BIT(ADIS16204_DIAG_STAT_SELFTEST_FAIL_BIT) |
+ BIT(ADIS16204_DIAG_STAT_SPI_FAIL_BIT) |
+ BIT(ADIS16204_DIAG_STAT_FLASH_UPT_BIT) |
+ BIT(ADIS16204_DIAG_STAT_POWER_HIGH_BIT) |
+ BIT(ADIS16204_DIAG_STAT_POWER_LOW_BIT),
+};
+
+static int adis16204_probe(struct spi_device *spi)
{
int ret;
- struct adis16204_state *st;
+ struct adis *st;
struct iio_dev *indio_dev;
/* setup the industrialio driver allocated elements */
@@ -510,8 +197,6 @@
st = iio_priv(indio_dev);
/* this is only used for removal purposes */
spi_set_drvdata(spi, indio_dev);
- st->us = spi;
- mutex_init(&st->buf_lock);
indio_dev->name = spi->dev.driver->name;
indio_dev->dev.parent = &spi->dev;
@@ -520,54 +205,39 @@
indio_dev->num_channels = ARRAY_SIZE(adis16204_channels);
indio_dev->modes = INDIO_DIRECT_MODE;
- ret = adis16204_configure_ring(indio_dev);
+ ret = adis_init(st, indio_dev, spi, &adis16204_data);
if (ret)
goto error_free_dev;
- ret = iio_buffer_register(indio_dev,
- adis16204_channels,
- 6);
- if (ret) {
- printk(KERN_ERR "failed to initialize the ring\n");
- goto error_unreg_ring_funcs;
- }
-
- if (spi->irq) {
- ret = adis16204_probe_trigger(indio_dev);
- if (ret)
- goto error_uninitialize_ring;
- }
+ ret = adis_setup_buffer_and_trigger(st, indio_dev, NULL);
+ if (ret)
+ goto error_free_dev;
/* Get the device into a sane initial state */
- ret = adis16204_initial_setup(indio_dev);
+ ret = adis_initial_startup(st);
if (ret)
- goto error_remove_trigger;
+ goto error_cleanup_buffer_trigger;
ret = iio_device_register(indio_dev);
if (ret)
- goto error_remove_trigger;
+ goto error_cleanup_buffer_trigger;
return 0;
-error_remove_trigger:
- adis16204_remove_trigger(indio_dev);
-error_uninitialize_ring:
- iio_buffer_unregister(indio_dev);
-error_unreg_ring_funcs:
- adis16204_unconfigure_ring(indio_dev);
+error_cleanup_buffer_trigger:
+ adis_cleanup_buffer_and_trigger(st, indio_dev);
error_free_dev:
iio_device_free(indio_dev);
error_ret:
return ret;
}
-static int __devexit adis16204_remove(struct spi_device *spi)
+static int adis16204_remove(struct spi_device *spi)
{
struct iio_dev *indio_dev = spi_get_drvdata(spi);
+ struct adis *st = iio_priv(indio_dev);
iio_device_unregister(indio_dev);
- adis16204_remove_trigger(indio_dev);
- iio_buffer_unregister(indio_dev);
- adis16204_unconfigure_ring(indio_dev);
+ adis_cleanup_buffer_and_trigger(st, indio_dev);
iio_device_free(indio_dev);
return 0;
@@ -579,7 +249,7 @@
.owner = THIS_MODULE,
},
.probe = adis16204_probe,
- .remove = __devexit_p(adis16204_remove),
+ .remove = adis16204_remove,
};
module_spi_driver(adis16204_driver);
diff --git a/drivers/staging/iio/accel/adis16204_ring.c b/drivers/staging/iio/accel/adis16204_ring.c
deleted file mode 100644
index 4c976be..0000000
--- a/drivers/staging/iio/accel/adis16204_ring.c
+++ /dev/null
@@ -1,134 +0,0 @@
-#include <linux/export.h>
-#include <linux/interrupt.h>
-#include <linux/mutex.h>
-#include <linux/kernel.h>
-#include <linux/spi/spi.h>
-#include <linux/slab.h>
-
-#include <linux/iio/iio.h>
-#include "../ring_sw.h"
-#include <linux/iio/trigger_consumer.h>
-#include "adis16204.h"
-
-/**
- * adis16204_read_ring_data() read data registers which will be placed into ring
- * @indio_dev: the IIO device
- * @rx: somewhere to pass back the value read
- **/
-static int adis16204_read_ring_data(struct iio_dev *indio_dev, u8 *rx)
-{
- struct spi_message msg;
- struct adis16204_state *st = iio_priv(indio_dev);
- struct spi_transfer xfers[ADIS16204_OUTPUTS + 1];
- int ret;
- int i;
-
- mutex_lock(&st->buf_lock);
-
- spi_message_init(&msg);
-
- memset(xfers, 0, sizeof(xfers));
- for (i = 0; i <= ADIS16204_OUTPUTS; i++) {
- xfers[i].bits_per_word = 8;
- xfers[i].cs_change = 1;
- xfers[i].len = 2;
- xfers[i].delay_usecs = 20;
- xfers[i].tx_buf = st->tx + 2 * i;
- st->tx[2 * i]
- = ADIS16204_READ_REG(ADIS16204_SUPPLY_OUT + 2 * i);
- st->tx[2 * i + 1] = 0;
- if (i >= 1)
- xfers[i].rx_buf = rx + 2 * (i - 1);
- spi_message_add_tail(&xfers[i], &msg);
- }
-
- ret = spi_sync(st->us, &msg);
- if (ret)
- dev_err(&st->us->dev, "problem when burst reading");
-
- mutex_unlock(&st->buf_lock);
-
- return ret;
-}
-
-/* Whilst this makes a lot of calls to iio_sw_ring functions - it is to device
- * specific to be rolled into the core.
- */
-static irqreturn_t adis16204_trigger_handler(int irq, void *p)
-{
- struct iio_poll_func *pf = p;
- struct iio_dev *indio_dev = pf->indio_dev;
- struct adis16204_state *st = iio_priv(indio_dev);
- int i = 0;
- s16 *data;
-
- data = kmalloc(indio_dev->scan_bytes, GFP_KERNEL);
- if (data == NULL) {
- dev_err(&st->us->dev, "memory alloc failed in ring bh");
- goto done;
- }
-
- if (!bitmap_empty(indio_dev->active_scan_mask, indio_dev->masklength) &&
- adis16204_read_ring_data(indio_dev, st->rx) >= 0)
- for (; i < bitmap_weight(indio_dev->active_scan_mask,
- indio_dev->masklength); i++)
- data[i] = be16_to_cpup((__be16 *)&(st->rx[i*2]));
-
- /* Guaranteed to be aligned with 8 byte boundary */
- if (indio_dev->scan_timestamp)
- *((s64 *)(data + ((i + 3)/4)*4)) = pf->timestamp;
-
- iio_push_to_buffer(indio_dev->buffer, (u8 *)data);
-
- kfree(data);
-done:
- iio_trigger_notify_done(indio_dev->trig);
-
- return IRQ_HANDLED;
-}
-
-void adis16204_unconfigure_ring(struct iio_dev *indio_dev)
-{
- iio_dealloc_pollfunc(indio_dev->pollfunc);
- iio_sw_rb_free(indio_dev->buffer);
-}
-
-static const struct iio_buffer_setup_ops adis16204_ring_setup_ops = {
- .preenable = &iio_sw_buffer_preenable,
- .postenable = &iio_triggered_buffer_postenable,
- .predisable = &iio_triggered_buffer_predisable,
-};
-
-int adis16204_configure_ring(struct iio_dev *indio_dev)
-{
- int ret = 0;
- struct iio_buffer *ring;
-
- ring = iio_sw_rb_allocate(indio_dev);
- if (!ring) {
- ret = -ENOMEM;
- return ret;
- }
- indio_dev->buffer = ring;
- ring->scan_timestamp = true;
- indio_dev->setup_ops = &adis16204_ring_setup_ops;
-
- indio_dev->pollfunc = iio_alloc_pollfunc(&iio_pollfunc_store_time,
- &adis16204_trigger_handler,
- IRQF_ONESHOT,
- indio_dev,
- "%s_consumer%d",
- indio_dev->name,
- indio_dev->id);
- if (indio_dev->pollfunc == NULL) {
- ret = -ENOMEM;
- goto error_iio_sw_rb_free;
- }
-
- indio_dev->modes |= INDIO_BUFFER_TRIGGERED;
- return 0;
-
-error_iio_sw_rb_free:
- iio_sw_rb_free(indio_dev->buffer);
- return ret;
-}
diff --git a/drivers/staging/iio/accel/adis16204_trigger.c b/drivers/staging/iio/accel/adis16204_trigger.c
deleted file mode 100644
index 408a168..0000000
--- a/drivers/staging/iio/accel/adis16204_trigger.c
+++ /dev/null
@@ -1,73 +0,0 @@
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/spi/spi.h>
-#include <linux/export.h>
-
-#include <linux/iio/iio.h>
-#include <linux/iio/trigger.h>
-#include "adis16204.h"
-
-/**
- * adis16204_data_rdy_trigger_set_state() set datardy interrupt state
- **/
-static int adis16204_data_rdy_trigger_set_state(struct iio_trigger *trig,
- bool state)
-{
- struct iio_dev *indio_dev = trig->private_data;
-
- dev_dbg(&indio_dev->dev, "%s (%d)\n", __func__, state);
- return adis16204_set_irq(indio_dev, state);
-}
-
-static const struct iio_trigger_ops adis16204_trigger_ops = {
- .owner = THIS_MODULE,
- .set_trigger_state = &adis16204_data_rdy_trigger_set_state,
-};
-
-int adis16204_probe_trigger(struct iio_dev *indio_dev)
-{
- int ret;
- struct adis16204_state *st = iio_priv(indio_dev);
-
- st->trig = iio_trigger_alloc("adis16204-dev%d", indio_dev->id);
- if (st->trig == NULL) {
- ret = -ENOMEM;
- goto error_ret;
- }
-
- ret = request_irq(st->us->irq,
- &iio_trigger_generic_data_rdy_poll,
- IRQF_TRIGGER_RISING,
- "adis16204",
- st->trig);
- if (ret)
- goto error_free_trig;
-
- st->trig->dev.parent = &st->us->dev;
- st->trig->ops = &adis16204_trigger_ops;
- st->trig->private_data = indio_dev;
- ret = iio_trigger_register(st->trig);
-
- /* select default trigger */
- indio_dev->trig = st->trig;
- if (ret)
- goto error_free_irq;
-
- return 0;
-
-error_free_irq:
- free_irq(st->us->irq, st->trig);
-error_free_trig:
- iio_trigger_free(st->trig);
-error_ret:
- return ret;
-}
-
-void adis16204_remove_trigger(struct iio_dev *indio_dev)
-{
- struct adis16204_state *state = iio_priv(indio_dev);
-
- iio_trigger_unregister(state->trig);
- free_irq(state->us->irq, state->trig);
- iio_trigger_free(state->trig);
-}
diff --git a/drivers/staging/iio/accel/adis16209.h b/drivers/staging/iio/accel/adis16209.h
index 3c88b86..ad3945a 100644
--- a/drivers/staging/iio/accel/adis16209.h
+++ b/drivers/staging/iio/accel/adis16209.h
@@ -3,9 +3,6 @@
#define ADIS16209_STARTUP_DELAY 220 /* ms */
-#define ADIS16209_READ_REG(a) a
-#define ADIS16209_WRITE_REG(a) ((a) | 0x80)
-
/* Flash memory write count */
#define ADIS16209_FLASH_CNT 0x00
/* Output, power supply */
@@ -61,8 +58,6 @@
/* Operation, system command register */
#define ADIS16209_GLOB_CMD 0x3E
-#define ADIS16209_OUTPUTS 8
-
/* MSC_CTRL */
/* Self-test at power-on: 1 = disabled, 0 = enabled */
#define ADIS16209_MSC_CTRL_PWRUP_SELF_TEST (1 << 10)
@@ -81,44 +76,23 @@
/* Alarm 1 status: 1 = alarm active, 0 = alarm inactive */
#define ADIS16209_DIAG_STAT_ALARM1 (1<<8)
/* Self-test diagnostic error flag: 1 = error condition, 0 = normal operation */
-#define ADIS16209_DIAG_STAT_SELFTEST_FAIL (1<<5)
+#define ADIS16209_DIAG_STAT_SELFTEST_FAIL_BIT 5
/* SPI communications failure */
-#define ADIS16209_DIAG_STAT_SPI_FAIL (1<<3)
+#define ADIS16209_DIAG_STAT_SPI_FAIL_BIT 3
/* Flash update failure */
-#define ADIS16209_DIAG_STAT_FLASH_UPT (1<<2)
+#define ADIS16209_DIAG_STAT_FLASH_UPT_BIT 2
/* Power supply above 3.625 V */
-#define ADIS16209_DIAG_STAT_POWER_HIGH (1<<1)
+#define ADIS16209_DIAG_STAT_POWER_HIGH_BIT 1
/* Power supply below 3.15 V */
-#define ADIS16209_DIAG_STAT_POWER_LOW (1<<0)
+#define ADIS16209_DIAG_STAT_POWER_LOW_BIT 0
/* GLOB_CMD */
#define ADIS16209_GLOB_CMD_SW_RESET (1<<7)
#define ADIS16209_GLOB_CMD_CLEAR_STAT (1<<4)
#define ADIS16209_GLOB_CMD_FACTORY_CAL (1<<1)
-#define ADIS16209_MAX_TX 24
-#define ADIS16209_MAX_RX 24
-
#define ADIS16209_ERROR_ACTIVE (1<<14)
-/**
- * struct adis16209_state - device instance specific data
- * @us: actual spi_device
- * @trig: data ready trigger registered with iio
- * @tx: transmit buffer
- * @rx: receive buffer
- * @buf_lock: mutex to protect tx and rx
- **/
-struct adis16209_state {
- struct spi_device *us;
- struct iio_trigger *trig;
- struct mutex buf_lock;
- u8 tx[ADIS16209_MAX_TX] ____cacheline_aligned;
- u8 rx[ADIS16209_MAX_RX];
-};
-
-int adis16209_set_irq(struct iio_dev *indio_dev, bool enable);
-
#define ADIS16209_SCAN_SUPPLY 0
#define ADIS16209_SCAN_ACC_X 1
#define ADIS16209_SCAN_ACC_Y 2
@@ -128,45 +102,4 @@
#define ADIS16209_SCAN_INCLI_Y 6
#define ADIS16209_SCAN_ROT 7
-#ifdef CONFIG_IIO_BUFFER
-
-void adis16209_remove_trigger(struct iio_dev *indio_dev);
-int adis16209_probe_trigger(struct iio_dev *indio_dev);
-
-ssize_t adis16209_read_data_from_ring(struct device *dev,
- struct device_attribute *attr,
- char *buf);
-
-int adis16209_configure_ring(struct iio_dev *indio_dev);
-void adis16209_unconfigure_ring(struct iio_dev *indio_dev);
-
-#else /* CONFIG_IIO_BUFFER */
-
-static inline void adis16209_remove_trigger(struct iio_dev *indio_dev)
-{
-}
-
-static inline int adis16209_probe_trigger(struct iio_dev *indio_dev)
-{
- return 0;
-}
-
-static inline ssize_t
-adis16209_read_data_from_ring(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- return 0;
-}
-
-static int adis16209_configure_ring(struct iio_dev *indio_dev)
-{
- return 0;
-}
-
-static inline void adis16209_unconfigure_ring(struct iio_dev *indio_dev)
-{
-}
-
-#endif /* CONFIG_IIO_BUFFER */
#endif /* SPI_ADIS16209_H_ */
diff --git a/drivers/staging/iio/accel/adis16209_core.c b/drivers/staging/iio/accel/adis16209_core.c
index 7ee974b..69c50ee 100644
--- a/drivers/staging/iio/accel/adis16209_core.c
+++ b/drivers/staging/iio/accel/adis16209_core.c
@@ -19,262 +19,19 @@
#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
#include <linux/iio/buffer.h>
+#include <linux/iio/imu/adis.h>
#include "adis16209.h"
-#define DRIVER_NAME "adis16209"
-
-/**
- * adis16209_spi_write_reg_8() - write single byte to a register
- * @indio_dev: iio device associated with actual device
- * @reg_address: the address of the register to be written
- * @val: the value to write
- **/
-static int adis16209_spi_write_reg_8(struct iio_dev *indio_dev,
- u8 reg_address,
- u8 val)
-{
- int ret;
- struct adis16209_state *st = iio_priv(indio_dev);
-
- mutex_lock(&st->buf_lock);
- st->tx[0] = ADIS16209_WRITE_REG(reg_address);
- st->tx[1] = val;
-
- ret = spi_write(st->us, st->tx, 2);
- mutex_unlock(&st->buf_lock);
-
- return ret;
-}
-
-/**
- * adis16209_spi_write_reg_16() - write 2 bytes to a pair of registers
- * @indio_dev: iio device associated actual device
- * @reg_address: the address of the lower of the two registers. Second register
- * is assumed to have address one greater.
- * @val: value to be written
- **/
-static int adis16209_spi_write_reg_16(struct iio_dev *indio_dev,
- u8 lower_reg_address,
- u16 value)
-{
- int ret;
- struct spi_message msg;
- struct adis16209_state *st = iio_priv(indio_dev);
- struct spi_transfer xfers[] = {
- {
- .tx_buf = st->tx,
- .bits_per_word = 8,
- .len = 2,
- .cs_change = 1,
- .delay_usecs = 30,
- }, {
- .tx_buf = st->tx + 2,
- .bits_per_word = 8,
- .len = 2,
- .delay_usecs = 30,
- },
- };
-
- mutex_lock(&st->buf_lock);
- st->tx[0] = ADIS16209_WRITE_REG(lower_reg_address);
- st->tx[1] = value & 0xFF;
- st->tx[2] = ADIS16209_WRITE_REG(lower_reg_address + 1);
- st->tx[3] = (value >> 8) & 0xFF;
-
- spi_message_init(&msg);
- spi_message_add_tail(&xfers[0], &msg);
- spi_message_add_tail(&xfers[1], &msg);
- ret = spi_sync(st->us, &msg);
- mutex_unlock(&st->buf_lock);
-
- return ret;
-}
-
-/**
- * adis16209_spi_read_reg_16() - read 2 bytes from a 16-bit register
- * @indio_dev: iio device associated with device
- * @reg_address: the address of the lower of the two registers. Second register
- * is assumed to have address one greater.
- * @val: somewhere to pass back the value read
- **/
-static int adis16209_spi_read_reg_16(struct iio_dev *indio_dev,
- u8 lower_reg_address,
- u16 *val)
-{
- struct spi_message msg;
- struct adis16209_state *st = iio_priv(indio_dev);
- int ret;
- struct spi_transfer xfers[] = {
- {
- .tx_buf = st->tx,
- .bits_per_word = 8,
- .len = 2,
- .cs_change = 1,
- .delay_usecs = 30,
- }, {
- .rx_buf = st->rx,
- .bits_per_word = 8,
- .len = 2,
- .delay_usecs = 30,
- },
- };
-
- mutex_lock(&st->buf_lock);
- st->tx[0] = ADIS16209_READ_REG(lower_reg_address);
- st->tx[1] = 0;
-
- spi_message_init(&msg);
- spi_message_add_tail(&xfers[0], &msg);
- spi_message_add_tail(&xfers[1], &msg);
- ret = spi_sync(st->us, &msg);
- if (ret) {
- dev_err(&st->us->dev,
- "problem when reading 16 bit register 0x%02X",
- lower_reg_address);
- goto error_ret;
- }
- *val = (st->rx[0] << 8) | st->rx[1];
-
-error_ret:
- mutex_unlock(&st->buf_lock);
- return ret;
-}
-
-static int adis16209_reset(struct iio_dev *indio_dev)
-{
- int ret;
- ret = adis16209_spi_write_reg_8(indio_dev,
- ADIS16209_GLOB_CMD,
- ADIS16209_GLOB_CMD_SW_RESET);
- if (ret)
- dev_err(&indio_dev->dev, "problem resetting device");
-
- return ret;
-}
-
-int adis16209_set_irq(struct iio_dev *indio_dev, bool enable)
-{
- int ret = 0;
- u16 msc;
-
- ret = adis16209_spi_read_reg_16(indio_dev, ADIS16209_MSC_CTRL, &msc);
- if (ret)
- goto error_ret;
-
- msc |= ADIS16209_MSC_CTRL_ACTIVE_HIGH;
- msc &= ~ADIS16209_MSC_CTRL_DATA_RDY_DIO2;
- if (enable)
- msc |= ADIS16209_MSC_CTRL_DATA_RDY_EN;
- else
- msc &= ~ADIS16209_MSC_CTRL_DATA_RDY_EN;
-
- ret = adis16209_spi_write_reg_16(indio_dev, ADIS16209_MSC_CTRL, msc);
-
-error_ret:
- return ret;
-}
-
-static int adis16209_check_status(struct iio_dev *indio_dev)
-{
- u16 status;
- int ret;
-
- ret = adis16209_spi_read_reg_16(indio_dev,
- ADIS16209_DIAG_STAT, &status);
- if (ret < 0) {
- dev_err(&indio_dev->dev, "Reading status failed\n");
- goto error_ret;
- }
- ret = status & 0x1F;
-
- if (status & ADIS16209_DIAG_STAT_SELFTEST_FAIL)
- dev_err(&indio_dev->dev, "Self test failure\n");
- if (status & ADIS16209_DIAG_STAT_SPI_FAIL)
- dev_err(&indio_dev->dev, "SPI failure\n");
- if (status & ADIS16209_DIAG_STAT_FLASH_UPT)
- dev_err(&indio_dev->dev, "Flash update failed\n");
- if (status & ADIS16209_DIAG_STAT_POWER_HIGH)
- dev_err(&indio_dev->dev, "Power supply above 3.625V\n");
- if (status & ADIS16209_DIAG_STAT_POWER_LOW)
- dev_err(&indio_dev->dev, "Power supply below 3.15V\n");
-
-error_ret:
- return ret;
-}
-
-static int adis16209_self_test(struct iio_dev *indio_dev)
-{
- int ret;
- ret = adis16209_spi_write_reg_16(indio_dev,
- ADIS16209_MSC_CTRL,
- ADIS16209_MSC_CTRL_SELF_TEST_EN);
- if (ret) {
- dev_err(&indio_dev->dev, "problem starting self test");
- goto err_ret;
- }
-
- adis16209_check_status(indio_dev);
-
-err_ret:
- return ret;
-}
-
-static int adis16209_initial_setup(struct iio_dev *indio_dev)
-{
- int ret;
-
- /* Disable IRQ */
- ret = adis16209_set_irq(indio_dev, false);
- if (ret) {
- dev_err(&indio_dev->dev, "disable irq failed");
- goto err_ret;
- }
-
- /* Do self test */
- ret = adis16209_self_test(indio_dev);
- if (ret) {
- dev_err(&indio_dev->dev, "self test failure");
- goto err_ret;
- }
-
- /* Read status register to check the result */
- ret = adis16209_check_status(indio_dev);
- if (ret) {
- adis16209_reset(indio_dev);
- dev_err(&indio_dev->dev, "device not playing ball -> reset");
- msleep(ADIS16209_STARTUP_DELAY);
- ret = adis16209_check_status(indio_dev);
- if (ret) {
- dev_err(&indio_dev->dev, "giving up");
- goto err_ret;
- }
- }
-
-err_ret:
- return ret;
-}
-
-enum adis16209_chan {
- in_supply,
- temp,
- accel_x,
- accel_y,
- incli_x,
- incli_y,
- in_aux,
- rot,
-};
-
-static const u8 adis16209_addresses[8][2] = {
- [in_supply] = { ADIS16209_SUPPLY_OUT },
- [in_aux] = { ADIS16209_AUX_ADC },
- [accel_x] = { ADIS16209_XACCL_OUT, ADIS16209_XACCL_NULL },
- [accel_y] = { ADIS16209_YACCL_OUT, ADIS16209_YACCL_NULL },
- [incli_x] = { ADIS16209_XINCL_OUT, ADIS16209_XINCL_NULL },
- [incli_y] = { ADIS16209_YINCL_OUT, ADIS16209_YINCL_NULL },
- [rot] = { ADIS16209_ROT_OUT },
- [temp] = { ADIS16209_TEMP_OUT },
+static const u8 adis16209_addresses[8][1] = {
+ [ADIS16209_SCAN_SUPPLY] = { },
+ [ADIS16209_SCAN_AUX_ADC] = { },
+ [ADIS16209_SCAN_ACC_X] = { ADIS16209_XACCL_NULL },
+ [ADIS16209_SCAN_ACC_Y] = { ADIS16209_YACCL_NULL },
+ [ADIS16209_SCAN_INCLI_X] = { ADIS16209_XINCL_NULL },
+ [ADIS16209_SCAN_INCLI_Y] = { ADIS16209_YINCL_NULL },
+ [ADIS16209_SCAN_ROT] = { },
+ [ADIS16209_SCAN_TEMP] = { },
};
static int adis16209_write_raw(struct iio_dev *indio_dev,
@@ -283,6 +40,7 @@
int val2,
long mask)
{
+ struct adis *st = iio_priv(indio_dev);
int bits;
s16 val16;
u8 addr;
@@ -295,10 +53,10 @@
break;
default:
return -EINVAL;
- };
+ }
val16 = val & ((1 << bits) - 1);
- addr = adis16209_addresses[chan->address][1];
- return adis16209_spi_write_reg_16(indio_dev, addr, val16);
+ addr = adis16209_addresses[chan->scan_index][0];
+ return adis_write_reg_16(st, addr, val16);
}
return -EINVAL;
}
@@ -308,6 +66,7 @@
int *val, int *val2,
long mask)
{
+ struct adis *st = iio_priv(indio_dev);
int ret;
int bits;
u8 addr;
@@ -315,29 +74,8 @@
switch (mask) {
case IIO_CHAN_INFO_RAW:
- mutex_lock(&indio_dev->mlock);
- addr = adis16209_addresses[chan->address][0];
- ret = adis16209_spi_read_reg_16(indio_dev, addr, &val16);
- if (ret) {
- mutex_unlock(&indio_dev->mlock);
- return ret;
- }
-
- if (val16 & ADIS16209_ERROR_ACTIVE) {
- ret = adis16209_check_status(indio_dev);
- if (ret) {
- mutex_unlock(&indio_dev->mlock);
- return ret;
- }
- }
- val16 = val16 & ((1 << chan->scan_type.realbits) - 1);
- if (chan->scan_type.sign == 's')
- val16 = (s16)(val16 <<
- (16 - chan->scan_type.realbits)) >>
- (16 - chan->scan_type.realbits);
- *val = val16;
- mutex_unlock(&indio_dev->mlock);
- return IIO_VAL_INT;
+ return adis_single_conversion(indio_dev, chan,
+ ADIS16209_ERROR_ACTIVE, val);
case IIO_CHAN_INFO_SCALE:
switch (chan->type) {
case IIO_VOLTAGE:
@@ -374,10 +112,10 @@
break;
default:
return -EINVAL;
- };
+ }
mutex_lock(&indio_dev->mlock);
- addr = adis16209_addresses[chan->address][1];
- ret = adis16209_spi_read_reg_16(indio_dev, addr, &val16);
+ addr = adis16209_addresses[chan->scan_index][0];
+ ret = adis_read_reg_16(st, addr, &val16);
if (ret) {
mutex_unlock(&indio_dev->mlock);
return ret;
@@ -392,128 +130,56 @@
}
static const struct iio_chan_spec adis16209_channels[] = {
- {
- .type = IIO_VOLTAGE,
- .indexed = 1,
- .channel = 0,
- .extend_name = "supply",
- .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
- IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
- .address = in_supply,
- .scan_index = ADIS16209_SCAN_SUPPLY,
- .scan_type = {
- .sign = 'u',
- .realbits = 14,
- .storagebits = 16,
- },
- }, {
- .type = IIO_TEMP,
- .indexed = 0,
- .channel = 0,
- .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
- IIO_CHAN_INFO_SCALE_SEPARATE_BIT |
- IIO_CHAN_INFO_OFFSET_SEPARATE_BIT,
- .address = temp,
- .scan_index = ADIS16209_SCAN_TEMP,
- .scan_type = {
- .sign = 'u',
- .realbits = 12,
- .storagebits = 16,
- },
- }, {
- .type = IIO_ACCEL,
- .modified = 1,
- .channel2 = IIO_MOD_X,
- .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
- IIO_CHAN_INFO_SCALE_SHARED_BIT |
- IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT,
- .address = accel_x,
- .scan_index = ADIS16209_SCAN_ACC_X,
- .scan_type = {
- .sign = 's',
- .realbits = 14,
- .storagebits = 16,
- },
- }, {
- .type = IIO_ACCEL,
- .modified = 1,
- .channel2 = IIO_MOD_Y,
- .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
- IIO_CHAN_INFO_SCALE_SHARED_BIT |
- IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT,
- .address = accel_y,
- .scan_index = ADIS16209_SCAN_ACC_Y,
- .scan_type = {
- .sign = 's',
- .realbits = 14,
- .storagebits = 16,
- },
- }, {
- .type = IIO_VOLTAGE,
- .indexed = 1,
- .channel = 1,
- .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
- IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
- .address = in_aux,
- .scan_index = ADIS16209_SCAN_AUX_ADC,
- .scan_type = {
- .sign = 'u',
- .realbits = 12,
- .storagebits = 16,
- },
- }, {
- .type = IIO_INCLI,
- .modified = 1,
- .channel2 = IIO_MOD_X,
- .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
- IIO_CHAN_INFO_SCALE_SHARED_BIT,
- .address = incli_x,
- .scan_index = ADIS16209_SCAN_INCLI_X,
- .scan_type = {
- .sign = 's',
- .realbits = 14,
- .storagebits = 16,
- },
- }, {
- .type = IIO_INCLI,
- .modified = 1,
- .channel2 = IIO_MOD_Y,
- .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
- IIO_CHAN_INFO_SCALE_SHARED_BIT,
- .address = incli_y,
- .scan_index = ADIS16209_SCAN_INCLI_Y,
- .scan_type = {
- .sign = 's',
- .realbits = 14,
- .storagebits = 16,
- },
- }, {
- .type = IIO_ROT,
- .modified = 1,
- .channel2 = IIO_MOD_X,
- .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
- IIO_CHAN_INFO_SCALE_SHARED_BIT,
- .address = rot,
- .scan_index = ADIS16209_SCAN_ROT,
- .scan_type = {
- .sign = 's',
- .realbits = 14,
- .storagebits = 16,
- },
- },
+ ADIS_SUPPLY_CHAN(ADIS16209_SUPPLY_OUT, ADIS16209_SCAN_SUPPLY, 14),
+ ADIS_TEMP_CHAN(ADIS16209_TEMP_OUT, ADIS16209_SCAN_TEMP, 12),
+ ADIS_ACCEL_CHAN(X, ADIS16209_XACCL_OUT, ADIS16209_SCAN_ACC_X,
+ IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT, 14),
+ ADIS_ACCEL_CHAN(Y, ADIS16209_YACCL_OUT, ADIS16209_SCAN_ACC_Y,
+ IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT, 14),
+ ADIS_AUX_ADC_CHAN(ADIS16209_AUX_ADC, ADIS16209_SCAN_AUX_ADC, 12),
+ ADIS_INCLI_CHAN(X, ADIS16209_XINCL_OUT, ADIS16209_SCAN_INCLI_X, 0, 14),
+ ADIS_INCLI_CHAN(Y, ADIS16209_YINCL_OUT, ADIS16209_SCAN_INCLI_Y, 0, 14),
+ ADIS_ROT_CHAN(X, ADIS16209_ROT_OUT, ADIS16209_SCAN_ROT, 0, 14),
IIO_CHAN_SOFT_TIMESTAMP(8)
};
static const struct iio_info adis16209_info = {
.read_raw = &adis16209_read_raw,
.write_raw = &adis16209_write_raw,
+ .update_scan_mode = adis_update_scan_mode,
.driver_module = THIS_MODULE,
};
-static int __devinit adis16209_probe(struct spi_device *spi)
+static const char * const adis16209_status_error_msgs[] = {
+ [ADIS16209_DIAG_STAT_SELFTEST_FAIL_BIT] = "Self test failure",
+ [ADIS16209_DIAG_STAT_SPI_FAIL_BIT] = "SPI failure",
+ [ADIS16209_DIAG_STAT_FLASH_UPT_BIT] = "Flash update failed",
+ [ADIS16209_DIAG_STAT_POWER_HIGH_BIT] = "Power supply above 3.625V",
+ [ADIS16209_DIAG_STAT_POWER_LOW_BIT] = "Power supply below 3.15V",
+};
+
+static const struct adis_data adis16209_data = {
+ .read_delay = 30,
+ .msc_ctrl_reg = ADIS16209_MSC_CTRL,
+ .glob_cmd_reg = ADIS16209_GLOB_CMD,
+ .diag_stat_reg = ADIS16209_DIAG_STAT,
+
+ .self_test_mask = ADIS16209_MSC_CTRL_SELF_TEST_EN,
+ .startup_delay = ADIS16209_STARTUP_DELAY,
+
+ .status_error_msgs = adis16209_status_error_msgs,
+ .status_error_mask = BIT(ADIS16209_DIAG_STAT_SELFTEST_FAIL_BIT) |
+ BIT(ADIS16209_DIAG_STAT_SPI_FAIL_BIT) |
+ BIT(ADIS16209_DIAG_STAT_FLASH_UPT_BIT) |
+ BIT(ADIS16209_DIAG_STAT_POWER_HIGH_BIT) |
+ BIT(ADIS16209_DIAG_STAT_POWER_LOW_BIT),
+};
+
+
+static int adis16209_probe(struct spi_device *spi)
{
int ret;
- struct adis16209_state *st;
+ struct adis *st;
struct iio_dev *indio_dev;
/* setup the industrialio driver allocated elements */
@@ -525,8 +191,6 @@
st = iio_priv(indio_dev);
/* this is only used for removal purposes */
spi_set_drvdata(spi, indio_dev);
- st->us = spi;
- mutex_init(&st->buf_lock);
indio_dev->name = spi->dev.driver->name;
indio_dev->dev.parent = &spi->dev;
@@ -535,54 +199,38 @@
indio_dev->num_channels = ARRAY_SIZE(adis16209_channels);
indio_dev->modes = INDIO_DIRECT_MODE;
- ret = adis16209_configure_ring(indio_dev);
+ ret = adis_init(st, indio_dev, spi, &adis16209_data);
+ if (ret)
+ goto error_free_dev;
+ ret = adis_setup_buffer_and_trigger(st, indio_dev, NULL);
if (ret)
goto error_free_dev;
- ret = iio_buffer_register(indio_dev,
- adis16209_channels,
- ARRAY_SIZE(adis16209_channels));
- if (ret) {
- printk(KERN_ERR "failed to initialize the ring\n");
- goto error_unreg_ring_funcs;
- }
-
- if (spi->irq) {
- ret = adis16209_probe_trigger(indio_dev);
- if (ret)
- goto error_uninitialize_ring;
- }
-
/* Get the device into a sane initial state */
- ret = adis16209_initial_setup(indio_dev);
+ ret = adis_initial_startup(st);
if (ret)
- goto error_remove_trigger;
+ goto error_cleanup_buffer_trigger;
ret = iio_device_register(indio_dev);
if (ret)
- goto error_remove_trigger;
+ goto error_cleanup_buffer_trigger;
return 0;
-error_remove_trigger:
- adis16209_remove_trigger(indio_dev);
-error_uninitialize_ring:
- iio_buffer_unregister(indio_dev);
-error_unreg_ring_funcs:
- adis16209_unconfigure_ring(indio_dev);
+error_cleanup_buffer_trigger:
+ adis_cleanup_buffer_and_trigger(st, indio_dev);
error_free_dev:
iio_device_free(indio_dev);
error_ret:
return ret;
}
-static int __devexit adis16209_remove(struct spi_device *spi)
+static int adis16209_remove(struct spi_device *spi)
{
struct iio_dev *indio_dev = spi_get_drvdata(spi);
+ struct adis *st = iio_priv(indio_dev);
iio_device_unregister(indio_dev);
- adis16209_remove_trigger(indio_dev);
- iio_buffer_unregister(indio_dev);
- adis16209_unconfigure_ring(indio_dev);
+ adis_cleanup_buffer_and_trigger(st, indio_dev);
iio_device_free(indio_dev);
return 0;
@@ -594,7 +242,7 @@
.owner = THIS_MODULE,
},
.probe = adis16209_probe,
- .remove = __devexit_p(adis16209_remove),
+ .remove = adis16209_remove,
};
module_spi_driver(adis16209_driver);
diff --git a/drivers/staging/iio/accel/adis16209_ring.c b/drivers/staging/iio/accel/adis16209_ring.c
deleted file mode 100644
index f939e29..0000000
--- a/drivers/staging/iio/accel/adis16209_ring.c
+++ /dev/null
@@ -1,134 +0,0 @@
-#include <linux/export.h>
-#include <linux/interrupt.h>
-#include <linux/mutex.h>
-#include <linux/kernel.h>
-#include <linux/spi/spi.h>
-#include <linux/slab.h>
-
-#include <linux/iio/iio.h>
-#include "../ring_sw.h"
-#include <linux/iio/trigger_consumer.h>
-#include "adis16209.h"
-
-/**
- * adis16209_read_ring_data() read data registers which will be placed into ring
- * @indio_dev: the IIO device
- * @rx: somewhere to pass back the value read
- **/
-static int adis16209_read_ring_data(struct iio_dev *indio_dev, u8 *rx)
-{
- struct spi_message msg;
- struct adis16209_state *st = iio_priv(indio_dev);
- struct spi_transfer xfers[ADIS16209_OUTPUTS + 1];
- int ret;
- int i;
-
- mutex_lock(&st->buf_lock);
-
- spi_message_init(&msg);
-
- memset(xfers, 0, sizeof(xfers));
- for (i = 0; i <= ADIS16209_OUTPUTS; i++) {
- xfers[i].bits_per_word = 8;
- xfers[i].cs_change = 1;
- xfers[i].len = 2;
- xfers[i].delay_usecs = 30;
- xfers[i].tx_buf = st->tx + 2 * i;
- st->tx[2 * i]
- = ADIS16209_READ_REG(ADIS16209_SUPPLY_OUT + 2 * i);
- st->tx[2 * i + 1] = 0;
- if (i >= 1)
- xfers[i].rx_buf = rx + 2 * (i - 1);
- spi_message_add_tail(&xfers[i], &msg);
- }
-
- ret = spi_sync(st->us, &msg);
- if (ret)
- dev_err(&st->us->dev, "problem when burst reading");
-
- mutex_unlock(&st->buf_lock);
-
- return ret;
-}
-
-/* Whilst this makes a lot of calls to iio_sw_ring functions - it is to device
- * specific to be rolled into the core.
- */
-static irqreturn_t adis16209_trigger_handler(int irq, void *p)
-{
- struct iio_poll_func *pf = p;
- struct iio_dev *indio_dev = pf->indio_dev;
- struct adis16209_state *st = iio_priv(indio_dev);
- int i = 0;
- s16 *data;
-
- data = kmalloc(indio_dev->scan_bytes, GFP_KERNEL);
- if (data == NULL) {
- dev_err(&st->us->dev, "memory alloc failed in ring bh");
- goto done;
- }
-
- if (!bitmap_empty(indio_dev->active_scan_mask, indio_dev->masklength) &&
- adis16209_read_ring_data(indio_dev, st->rx) >= 0)
- for (; i < bitmap_weight(indio_dev->active_scan_mask,
- indio_dev->masklength); i++)
- data[i] = be16_to_cpup((__be16 *)&(st->rx[i*2]));
-
- /* Guaranteed to be aligned with 8 byte boundary */
- if (indio_dev->scan_timestamp)
- *((s64 *)(data + ((i + 3)/4)*4)) = pf->timestamp;
-
- iio_push_to_buffer(indio_dev->buffer, (u8 *)data);
-
- kfree(data);
-done:
- iio_trigger_notify_done(indio_dev->trig);
-
- return IRQ_HANDLED;
-}
-
-void adis16209_unconfigure_ring(struct iio_dev *indio_dev)
-{
- iio_dealloc_pollfunc(indio_dev->pollfunc);
- iio_sw_rb_free(indio_dev->buffer);
-}
-
-static const struct iio_buffer_setup_ops adis16209_ring_setup_ops = {
- .preenable = &iio_sw_buffer_preenable,
- .postenable = &iio_triggered_buffer_postenable,
- .predisable = &iio_triggered_buffer_predisable,
-};
-
-int adis16209_configure_ring(struct iio_dev *indio_dev)
-{
- int ret = 0;
- struct iio_buffer *ring;
-
- ring = iio_sw_rb_allocate(indio_dev);
- if (!ring) {
- ret = -ENOMEM;
- return ret;
- }
- indio_dev->buffer = ring;
- ring->scan_timestamp = true;
- indio_dev->setup_ops = &adis16209_ring_setup_ops;
-
- indio_dev->pollfunc = iio_alloc_pollfunc(&iio_pollfunc_store_time,
- &adis16209_trigger_handler,
- IRQF_ONESHOT,
- indio_dev,
- "%s_consumer%d",
- indio_dev->name,
- indio_dev->id);
- if (indio_dev->pollfunc == NULL) {
- ret = -ENOMEM;
- goto error_iio_sw_rb_free;
- }
-
- indio_dev->modes |= INDIO_BUFFER_TRIGGERED;
- return 0;
-
-error_iio_sw_rb_free:
- iio_sw_rb_free(indio_dev->buffer);
- return ret;
-}
diff --git a/drivers/staging/iio/accel/adis16209_trigger.c b/drivers/staging/iio/accel/adis16209_trigger.c
deleted file mode 100644
index 2ad93dc..0000000
--- a/drivers/staging/iio/accel/adis16209_trigger.c
+++ /dev/null
@@ -1,81 +0,0 @@
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/spi/spi.h>
-#include <linux/export.h>
-
-#include <linux/iio/iio.h>
-#include <linux/iio/trigger.h>
-#include "adis16209.h"
-
-/**
- * adis16209_data_rdy_trig_poll() the event handler for the data rdy trig
- **/
-static irqreturn_t adis16209_data_rdy_trig_poll(int irq, void *trig)
-{
- iio_trigger_poll(trig, iio_get_time_ns());
- return IRQ_HANDLED;
-}
-
-/**
- * adis16209_data_rdy_trigger_set_state() set datardy interrupt state
- **/
-static int adis16209_data_rdy_trigger_set_state(struct iio_trigger *trig,
- bool state)
-{
- struct iio_dev *indio_dev = trig->private_data;
-
- dev_dbg(&indio_dev->dev, "%s (%d)\n", __func__, state);
- return adis16209_set_irq(indio_dev, state);
-}
-
-static const struct iio_trigger_ops adis16209_trigger_ops = {
- .owner = THIS_MODULE,
- .set_trigger_state = &adis16209_data_rdy_trigger_set_state,
-};
-
-int adis16209_probe_trigger(struct iio_dev *indio_dev)
-{
- int ret;
- struct adis16209_state *st = iio_priv(indio_dev);
-
- st->trig = iio_trigger_alloc("adis16209-dev%d", indio_dev->id);
- if (st->trig == NULL) {
- ret = -ENOMEM;
- goto error_ret;
- }
-
- ret = request_irq(st->us->irq,
- adis16209_data_rdy_trig_poll,
- IRQF_TRIGGER_RISING,
- "adis16209",
- st->trig);
- if (ret)
- goto error_free_trig;
- st->trig->dev.parent = &st->us->dev;
- st->trig->ops = &adis16209_trigger_ops;
- st->trig->private_data = indio_dev;
- ret = iio_trigger_register(st->trig);
-
- /* select default trigger */
- indio_dev->trig = st->trig;
- if (ret)
- goto error_free_irq;
-
- return 0;
-
-error_free_irq:
- free_irq(st->us->irq, st->trig);
-error_free_trig:
- iio_trigger_free(st->trig);
-error_ret:
- return ret;
-}
-
-void adis16209_remove_trigger(struct iio_dev *indio_dev)
-{
- struct adis16209_state *st = iio_priv(indio_dev);
-
- iio_trigger_unregister(st->trig);
- free_irq(st->us->irq, st->trig);
- iio_trigger_free(st->trig);
-}
diff --git a/drivers/staging/iio/accel/adis16220.h b/drivers/staging/iio/accel/adis16220.h
index 024313c..a894ad7 100644
--- a/drivers/staging/iio/accel/adis16220.h
+++ b/drivers/staging/iio/accel/adis16220.h
@@ -1,10 +1,9 @@
#ifndef SPI_ADIS16220_H_
#define SPI_ADIS16220_H_
-#define ADIS16220_STARTUP_DELAY 220 /* ms */
+#include <linux/iio/imu/adis.h>
-#define ADIS16220_READ_REG(a) a
-#define ADIS16220_WRITE_REG(a) ((a) | 0x80)
+#define ADIS16220_STARTUP_DELAY 220 /* ms */
/* Flash memory write count */
#define ADIS16220_FLASH_CNT 0x00
@@ -102,15 +101,15 @@
#define ADIS16220_DIAG_STAT_FLASH_CHK (1<<6)
#define ADIS16220_DIAG_STAT_SELF_TEST (1<<5)
/* Capture period violation/interruption */
-#define ADIS16220_DIAG_STAT_VIOLATION (1<<4)
+#define ADIS16220_DIAG_STAT_VIOLATION_BIT 4
/* SPI communications failure */
-#define ADIS16220_DIAG_STAT_SPI_FAIL (1<<3)
+#define ADIS16220_DIAG_STAT_SPI_FAIL_BIT 3
/* Flash update failure */
-#define ADIS16220_DIAG_STAT_FLASH_UPT (1<<2)
+#define ADIS16220_DIAG_STAT_FLASH_UPT_BIT 2
/* Power supply above 3.625 V */
-#define ADIS16220_DIAG_STAT_POWER_HIGH (1<<1)
+#define ADIS16220_DIAG_STAT_POWER_HIGH_BIT 1
/* Power supply below 3.15 V */
-#define ADIS16220_DIAG_STAT_POWER_LOW (1<<0)
+#define ADIS16220_DIAG_STAT_POWER_LOW_BIT 0
/* GLOB_CMD */
#define ADIS16220_GLOB_CMD_SW_RESET (1<<7)
@@ -125,13 +124,14 @@
/**
* struct adis16220_state - device instance specific data
- * @us: actual spi_device
+ * @adis: adis device
* @tx: transmit buffer
* @rx: receive buffer
* @buf_lock: mutex to protect tx and rx
**/
struct adis16220_state {
- struct spi_device *us;
+ struct adis adis;
+
struct mutex buf_lock;
u8 tx[ADIS16220_MAX_TX] ____cacheline_aligned;
u8 rx[ADIS16220_MAX_RX];
diff --git a/drivers/staging/iio/accel/adis16220_core.c b/drivers/staging/iio/accel/adis16220_core.c
index eaadd9d..370b01a 100644
--- a/drivers/staging/iio/accel/adis16220_core.c
+++ b/drivers/staging/iio/accel/adis16220_core.c
@@ -20,138 +20,19 @@
#include "adis16220.h"
-#define DRIVER_NAME "adis16220"
-
-/**
- * adis16220_spi_write_reg_8() - write single byte to a register
- * @indio_dev: iio device associated with child of actual device
- * @reg_address: the address of the register to be written
- * @val: the value to write
- **/
-static int adis16220_spi_write_reg_8(struct iio_dev *indio_dev,
- u8 reg_address,
- u8 val)
-{
- int ret;
- struct adis16220_state *st = iio_priv(indio_dev);
-
- mutex_lock(&st->buf_lock);
- st->tx[0] = ADIS16220_WRITE_REG(reg_address);
- st->tx[1] = val;
-
- ret = spi_write(st->us, st->tx, 2);
- mutex_unlock(&st->buf_lock);
-
- return ret;
-}
-
-/**
- * adis16220_spi_write_reg_16() - write 2 bytes to a pair of registers
- * @indio_dev: iio device associated with child of actual device
- * @reg_address: the address of the lower of the two registers. Second register
- * is assumed to have address one greater.
- * @val: value to be written
- **/
-static int adis16220_spi_write_reg_16(struct iio_dev *indio_dev,
- u8 lower_reg_address,
- u16 value)
-{
- int ret;
- struct spi_message msg;
- struct adis16220_state *st = iio_priv(indio_dev);
- struct spi_transfer xfers[] = {
- {
- .tx_buf = st->tx,
- .bits_per_word = 8,
- .len = 2,
- .cs_change = 1,
- .delay_usecs = 35,
- }, {
- .tx_buf = st->tx + 2,
- .bits_per_word = 8,
- .len = 2,
- .delay_usecs = 35,
- },
- };
-
- mutex_lock(&st->buf_lock);
- st->tx[0] = ADIS16220_WRITE_REG(lower_reg_address);
- st->tx[1] = value & 0xFF;
- st->tx[2] = ADIS16220_WRITE_REG(lower_reg_address + 1);
- st->tx[3] = (value >> 8) & 0xFF;
-
- spi_message_init(&msg);
- spi_message_add_tail(&xfers[0], &msg);
- spi_message_add_tail(&xfers[1], &msg);
- ret = spi_sync(st->us, &msg);
- mutex_unlock(&st->buf_lock);
-
- return ret;
-}
-
-/**
- * adis16220_spi_read_reg_16() - read 2 bytes from a 16-bit register
- * @indio_dev: iio device associated with child of actual device
- * @reg_address: the address of the lower of the two registers. Second register
- * is assumed to have address one greater.
- * @val: somewhere to pass back the value read
- **/
-static int adis16220_spi_read_reg_16(struct iio_dev *indio_dev,
- u8 lower_reg_address,
- u16 *val)
-{
- struct spi_message msg;
- struct adis16220_state *st = iio_priv(indio_dev);
- int ret;
- struct spi_transfer xfers[] = {
- {
- .tx_buf = st->tx,
- .bits_per_word = 8,
- .len = 2,
- .cs_change = 1,
- .delay_usecs = 35,
- }, {
- .rx_buf = st->rx,
- .bits_per_word = 8,
- .len = 2,
- .cs_change = 1,
- .delay_usecs = 35,
- },
- };
-
- mutex_lock(&st->buf_lock);
- st->tx[0] = ADIS16220_READ_REG(lower_reg_address);
- st->tx[1] = 0;
-
- spi_message_init(&msg);
- spi_message_add_tail(&xfers[0], &msg);
- spi_message_add_tail(&xfers[1], &msg);
- ret = spi_sync(st->us, &msg);
- if (ret) {
- dev_err(&st->us->dev,
- "problem when reading 16 bit register 0x%02X",
- lower_reg_address);
- goto error_ret;
- }
- *val = (st->rx[0] << 8) | st->rx[1];
-
-error_ret:
- mutex_unlock(&st->buf_lock);
- return ret;
-}
-
static ssize_t adis16220_read_16bit(struct device *dev,
struct device_attribute *attr,
char *buf)
{
struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+ struct adis16220_state *st = iio_priv(indio_dev);
ssize_t ret;
s16 val = 0;
/* Take the iio_dev status lock */
mutex_lock(&indio_dev->mlock);
- ret = adis16220_spi_read_reg_16(indio_dev, this_attr->address,
+ ret = adis_read_reg_16(&st->adis, this_attr->address,
(u16 *)&val);
mutex_unlock(&indio_dev->mlock);
if (ret)
@@ -166,13 +47,14 @@
{
struct iio_dev *indio_dev = dev_to_iio_dev(dev);
struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
+ struct adis16220_state *st = iio_priv(indio_dev);
int ret;
u16 val;
ret = kstrtou16(buf, 10, &val);
if (ret)
goto error_ret;
- ret = adis16220_spi_write_reg_16(indio_dev, this_attr->address, val);
+ ret = adis_write_reg_16(&st->adis, this_attr->address, val);
error_ret:
return ret ? ret : len;
@@ -180,10 +62,11 @@
static int adis16220_capture(struct iio_dev *indio_dev)
{
+ struct adis16220_state *st = iio_priv(indio_dev);
int ret;
- ret = adis16220_spi_write_reg_16(indio_dev,
- ADIS16220_GLOB_CMD,
- 0xBF08); /* initiates a manual data capture */
+
+ /* initiates a manual data capture */
+ ret = adis_write_reg_16(&st->adis, ADIS16220_GLOB_CMD, 0xBF08);
if (ret)
dev_err(&indio_dev->dev, "problem beginning capture");
@@ -192,18 +75,6 @@
return ret;
}
-static int adis16220_reset(struct iio_dev *indio_dev)
-{
- int ret;
- ret = adis16220_spi_write_reg_8(indio_dev,
- ADIS16220_GLOB_CMD,
- ADIS16220_GLOB_CMD_SW_RESET);
- if (ret)
- dev_err(&indio_dev->dev, "problem resetting device");
-
- return ret;
-}
-
static ssize_t adis16220_write_capture(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t len)
@@ -224,81 +95,6 @@
return len;
}
-static int adis16220_check_status(struct iio_dev *indio_dev)
-{
- u16 status;
- int ret;
-
- ret = adis16220_spi_read_reg_16(indio_dev, ADIS16220_DIAG_STAT,
- &status);
-
- if (ret < 0) {
- dev_err(&indio_dev->dev, "Reading status failed\n");
- goto error_ret;
- }
- ret = status & 0x7F;
-
- if (status & ADIS16220_DIAG_STAT_VIOLATION)
- dev_err(&indio_dev->dev,
- "Capture period violation/interruption\n");
- if (status & ADIS16220_DIAG_STAT_SPI_FAIL)
- dev_err(&indio_dev->dev, "SPI failure\n");
- if (status & ADIS16220_DIAG_STAT_FLASH_UPT)
- dev_err(&indio_dev->dev, "Flash update failed\n");
- if (status & ADIS16220_DIAG_STAT_POWER_HIGH)
- dev_err(&indio_dev->dev, "Power supply above 3.625V\n");
- if (status & ADIS16220_DIAG_STAT_POWER_LOW)
- dev_err(&indio_dev->dev, "Power supply below 3.15V\n");
-
-error_ret:
- return ret;
-}
-
-static int adis16220_self_test(struct iio_dev *indio_dev)
-{
- int ret;
- ret = adis16220_spi_write_reg_16(indio_dev,
- ADIS16220_MSC_CTRL,
- ADIS16220_MSC_CTRL_SELF_TEST_EN);
- if (ret) {
- dev_err(&indio_dev->dev, "problem starting self test");
- goto err_ret;
- }
-
- adis16220_check_status(indio_dev);
-
-err_ret:
- return ret;
-}
-
-static int adis16220_initial_setup(struct iio_dev *indio_dev)
-{
- int ret;
-
- /* Do self test */
- ret = adis16220_self_test(indio_dev);
- if (ret) {
- dev_err(&indio_dev->dev, "self test failure");
- goto err_ret;
- }
-
- /* Read status register to check the result */
- ret = adis16220_check_status(indio_dev);
- if (ret) {
- adis16220_reset(indio_dev);
- dev_err(&indio_dev->dev, "device not playing ball -> reset");
- msleep(ADIS16220_STARTUP_DELAY);
- ret = adis16220_check_status(indio_dev);
- if (ret) {
- dev_err(&indio_dev->dev, "giving up");
- goto err_ret;
- }
- }
-
-err_ret:
- return ret;
-}
-
static ssize_t adis16220_capture_buffer_read(struct iio_dev *indio_dev,
char *buf,
loff_t off,
@@ -335,7 +131,7 @@
count = ADIS16220_CAPTURE_SIZE - off;
/* write the begin position of capture buffer */
- ret = adis16220_spi_write_reg_16(indio_dev,
+ ret = adis_write_reg_16(&st->adis,
ADIS16220_CAPT_PNTR,
off > 1);
if (ret)
@@ -344,8 +140,9 @@
/* read count/2 values from capture buffer */
mutex_lock(&st->buf_lock);
+
for (i = 0; i < count; i += 2) {
- st->tx[i] = ADIS16220_READ_REG(addr);
+ st->tx[i] = ADIS_READ_REG(addr);
st->tx[i + 1] = 0;
}
xfers[1].len = count;
@@ -353,7 +150,7 @@
spi_message_init(&msg);
spi_message_add_tail(&xfers[0], &msg);
spi_message_add_tail(&xfers[1], &msg);
- ret = spi_sync(st->us, &msg);
+ ret = spi_sync(st->adis.spi, &msg);
if (ret) {
mutex_unlock(&st->buf_lock);
@@ -474,6 +271,8 @@
int *val, int *val2,
long mask)
{
+ struct adis16220_state *st = iio_priv(indio_dev);
+ const struct adis16220_address_spec *addr;
int ret = -EINVAL;
int addrind = 0;
u16 uval;
@@ -518,28 +317,21 @@
default:
return -EINVAL;
}
- if (adis16220_addresses[chan->address][addrind].sign) {
- ret = adis16220_spi_read_reg_16(indio_dev,
- adis16220_addresses[chan
- ->address]
- [addrind].addr,
- &sval);
+ addr = &adis16220_addresses[chan->address][addrind];
+ if (addr->sign) {
+ ret = adis_read_reg_16(&st->adis, addr->addr, &sval);
if (ret)
return ret;
- bits = adis16220_addresses[chan->address][addrind].bits;
+ bits = addr->bits;
sval &= (1 << bits) - 1;
sval = (s16)(sval << (16 - bits)) >> (16 - bits);
*val = sval;
return IIO_VAL_INT;
} else {
- ret = adis16220_spi_read_reg_16(indio_dev,
- adis16220_addresses[chan
- ->address]
- [addrind].addr,
- &uval);
+ ret = adis_read_reg_16(&st->adis, addr->addr, &uval);
if (ret)
return ret;
- bits = adis16220_addresses[chan->address][addrind].bits;
+ bits = addr->bits;
uval &= (1 << bits) - 1;
*val = uval;
return IIO_VAL_INT;
@@ -603,7 +395,33 @@
.read_raw = &adis16220_read_raw,
};
-static int __devinit adis16220_probe(struct spi_device *spi)
+static const char * const adis16220_status_error_msgs[] = {
+ [ADIS16220_DIAG_STAT_VIOLATION_BIT] = "Capture period violation/interruption",
+ [ADIS16220_DIAG_STAT_SPI_FAIL_BIT] = "SPI failure",
+ [ADIS16220_DIAG_STAT_FLASH_UPT_BIT] = "Flash update failed",
+ [ADIS16220_DIAG_STAT_POWER_HIGH_BIT] = "Power supply above 3.625V",
+ [ADIS16220_DIAG_STAT_POWER_LOW_BIT] = "Power supply below 3.15V",
+};
+
+static const struct adis_data adis16220_data = {
+ .read_delay = 35,
+ .write_delay = 35,
+ .msc_ctrl_reg = ADIS16220_MSC_CTRL,
+ .glob_cmd_reg = ADIS16220_GLOB_CMD,
+ .diag_stat_reg = ADIS16220_DIAG_STAT,
+
+ .self_test_mask = ADIS16220_MSC_CTRL_SELF_TEST_EN,
+ .startup_delay = ADIS16220_STARTUP_DELAY,
+
+ .status_error_msgs = adis16220_status_error_msgs,
+ .status_error_mask = BIT(ADIS16220_DIAG_STAT_VIOLATION_BIT) |
+ BIT(ADIS16220_DIAG_STAT_SPI_FAIL_BIT) |
+ BIT(ADIS16220_DIAG_STAT_FLASH_UPT_BIT) |
+ BIT(ADIS16220_DIAG_STAT_POWER_HIGH_BIT) |
+ BIT(ADIS16220_DIAG_STAT_POWER_LOW_BIT),
+};
+
+static int adis16220_probe(struct spi_device *spi)
{
int ret;
struct adis16220_state *st;
@@ -620,9 +438,6 @@
/* this is only used for removal purposes */
spi_set_drvdata(spi, indio_dev);
- st->us = spi;
- mutex_init(&st->buf_lock);
-
indio_dev->name = spi->dev.driver->name;
indio_dev->dev.parent = &spi->dev;
indio_dev->info = &adis16220_info;
@@ -646,8 +461,11 @@
if (ret)
goto error_rm_adc1_bin;
+ ret = adis_init(&st->adis, indio_dev, spi, &adis16220_data);
+ if (ret)
+ goto error_rm_adc2_bin;
/* Get the device into a sane initial state */
- ret = adis16220_initial_setup(indio_dev);
+ ret = adis_initial_startup(&st->adis);
if (ret)
goto error_rm_adc2_bin;
return 0;
@@ -666,7 +484,7 @@
return ret;
}
-static int __devexit adis16220_remove(struct spi_device *spi)
+static int adis16220_remove(struct spi_device *spi)
{
struct iio_dev *indio_dev = spi_get_drvdata(spi);
@@ -685,7 +503,7 @@
.owner = THIS_MODULE,
},
.probe = adis16220_probe,
- .remove = __devexit_p(adis16220_remove),
+ .remove = adis16220_remove,
};
module_spi_driver(adis16220_driver);
diff --git a/drivers/staging/iio/accel/adis16240.h b/drivers/staging/iio/accel/adis16240.h
index 3fabcc0..d442d49 100644
--- a/drivers/staging/iio/accel/adis16240.h
+++ b/drivers/staging/iio/accel/adis16240.h
@@ -3,9 +3,6 @@
#define ADIS16240_STARTUP_DELAY 220 /* ms */
-#define ADIS16240_READ_REG(a) a
-#define ADIS16240_WRITE_REG(a) ((a) | 0x80)
-
/* Flash memory write count */
#define ADIS16240_FLASH_CNT 0x00
/* Output, power supply */
@@ -75,8 +72,6 @@
/* System command */
#define ADIS16240_GLOB_CMD 0x4A
-#define ADIS16240_OUTPUTS 6
-
/* MSC_CTRL */
/* Enables sum-of-squares output (XYZPEAK_OUT) */
#define ADIS16240_MSC_CTRL_XYZPEAK_OUT_EN (1 << 15)
@@ -101,17 +96,17 @@
/* Flash test, checksum flag: 1 = mismatch, 0 = match */
#define ADIS16240_DIAG_STAT_CHKSUM (1<<6)
/* Power-on, self-test flag: 1 = failure, 0 = pass */
-#define ADIS16240_DIAG_STAT_PWRON_FAIL (1<<5)
+#define ADIS16240_DIAG_STAT_PWRON_FAIL_BIT 5
/* Power-on self-test: 1 = in-progress, 0 = complete */
#define ADIS16240_DIAG_STAT_PWRON_BUSY (1<<4)
/* SPI communications failure */
-#define ADIS16240_DIAG_STAT_SPI_FAIL (1<<3)
+#define ADIS16240_DIAG_STAT_SPI_FAIL_BIT 3
/* Flash update failure */
-#define ADIS16240_DIAG_STAT_FLASH_UPT (1<<2)
+#define ADIS16240_DIAG_STAT_FLASH_UPT_BIT 2
/* Power supply above 3.625 V */
-#define ADIS16240_DIAG_STAT_POWER_HIGH (1<<1)
+#define ADIS16240_DIAG_STAT_POWER_HIGH_BIT 1
/* Power supply below 3.15 V */
-#define ADIS16240_DIAG_STAT_POWER_LOW (1<<0)
+#define ADIS16240_DIAG_STAT_POWER_LOW_BIT 0
/* GLOB_CMD */
#define ADIS16240_GLOB_CMD_RESUME (1<<8)
@@ -120,77 +115,15 @@
#define ADIS16240_ERROR_ACTIVE (1<<14)
-#define ADIS16240_MAX_TX 24
-#define ADIS16240_MAX_RX 24
-
-/**
- * struct adis16240_state - device instance specific data
- * @us: actual spi_device
- * @trig: data ready trigger registered with iio
- * @tx: transmit buffer
- * @rx: receive buffer
- * @buf_lock: mutex to protect tx and rx
- **/
-struct adis16240_state {
- struct spi_device *us;
- struct iio_trigger *trig;
- struct mutex buf_lock;
- u8 tx[ADIS16240_MAX_TX] ____cacheline_aligned;
- u8 rx[ADIS16240_MAX_RX];
-};
-
-int adis16240_set_irq(struct iio_dev *indio_dev, bool enable);
-
/* At the moment triggers are only used for ring buffer
* filling. This may change!
*/
-#define ADIS16240_SCAN_SUPPLY 0
-#define ADIS16240_SCAN_ACC_X 1
-#define ADIS16240_SCAN_ACC_Y 2
-#define ADIS16240_SCAN_ACC_Z 3
+#define ADIS16240_SCAN_ACC_X 0
+#define ADIS16240_SCAN_ACC_Y 1
+#define ADIS16240_SCAN_ACC_Z 2
+#define ADIS16240_SCAN_SUPPLY 3
#define ADIS16240_SCAN_AUX_ADC 4
#define ADIS16240_SCAN_TEMP 5
-#ifdef CONFIG_IIO_BUFFER
-void adis16240_remove_trigger(struct iio_dev *indio_dev);
-int adis16240_probe_trigger(struct iio_dev *indio_dev);
-
-ssize_t adis16240_read_data_from_ring(struct device *dev,
- struct device_attribute *attr,
- char *buf);
-
-
-int adis16240_configure_ring(struct iio_dev *indio_dev);
-void adis16240_unconfigure_ring(struct iio_dev *indio_dev);
-
-#else /* CONFIG_IIO_BUFFER */
-
-static inline void adis16240_remove_trigger(struct iio_dev *indio_dev)
-{
-}
-
-static inline int adis16240_probe_trigger(struct iio_dev *indio_dev)
-{
- return 0;
-}
-
-static inline ssize_t
-adis16240_read_data_from_ring(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- return 0;
-}
-
-static int adis16240_configure_ring(struct iio_dev *indio_dev)
-{
- return 0;
-}
-
-static inline void adis16240_unconfigure_ring(struct iio_dev *indio_dev)
-{
-}
-
-#endif /* CONFIG_IIO_BUFFER */
#endif /* SPI_ADIS16240_H_ */
diff --git a/drivers/staging/iio/accel/adis16240_core.c b/drivers/staging/iio/accel/adis16240_core.c
index 35e0939..e97fa0b 100644
--- a/drivers/staging/iio/accel/adis16240_core.c
+++ b/drivers/staging/iio/accel/adis16240_core.c
@@ -22,151 +22,29 @@
#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
#include <linux/iio/buffer.h>
+#include <linux/iio/imu/adis.h>
#include "adis16240.h"
-#define DRIVER_NAME "adis16240"
-
-static int adis16240_check_status(struct iio_dev *indio_dev);
-
-/**
- * adis16240_spi_write_reg_8() - write single byte to a register
- * @indio_dev: iio_dev associated with device
- * @reg_address: the address of the register to be written
- * @val: the value to write
- **/
-static int adis16240_spi_write_reg_8(struct iio_dev *indio_dev,
- u8 reg_address,
- u8 val)
-{
- int ret;
- struct adis16240_state *st = iio_priv(indio_dev);
-
- mutex_lock(&st->buf_lock);
- st->tx[0] = ADIS16240_WRITE_REG(reg_address);
- st->tx[1] = val;
-
- ret = spi_write(st->us, st->tx, 2);
- mutex_unlock(&st->buf_lock);
-
- return ret;
-}
-
-/**
- * adis16240_spi_write_reg_16() - write 2 bytes to a pair of registers
- * @indio_dev: iio_dev for this device
- * @reg_address: the address of the lower of the two registers. Second register
- * is assumed to have address one greater.
- * @val: value to be written
- **/
-static int adis16240_spi_write_reg_16(struct iio_dev *indio_dev,
- u8 lower_reg_address,
- u16 value)
-{
- int ret;
- struct spi_message msg;
- struct adis16240_state *st = iio_priv(indio_dev);
- struct spi_transfer xfers[] = {
- {
- .tx_buf = st->tx,
- .bits_per_word = 8,
- .len = 2,
- .cs_change = 1,
- .delay_usecs = 35,
- }, {
- .tx_buf = st->tx + 2,
- .bits_per_word = 8,
- .len = 2,
- .delay_usecs = 35,
- },
- };
-
- mutex_lock(&st->buf_lock);
- st->tx[0] = ADIS16240_WRITE_REG(lower_reg_address);
- st->tx[1] = value & 0xFF;
- st->tx[2] = ADIS16240_WRITE_REG(lower_reg_address + 1);
- st->tx[3] = (value >> 8) & 0xFF;
-
- spi_message_init(&msg);
- spi_message_add_tail(&xfers[0], &msg);
- spi_message_add_tail(&xfers[1], &msg);
- ret = spi_sync(st->us, &msg);
- mutex_unlock(&st->buf_lock);
-
- return ret;
-}
-
-/**
- * adis16240_spi_read_reg_16() - read 2 bytes from a 16-bit register
- * @indio_dev: iio_dev for this device
- * @reg_address: the address of the lower of the two registers. Second register
- * is assumed to have address one greater.
- * @val: somewhere to pass back the value read
- **/
-static int adis16240_spi_read_reg_16(struct iio_dev *indio_dev,
- u8 lower_reg_address,
- u16 *val)
-{
- struct spi_message msg;
- struct adis16240_state *st = iio_priv(indio_dev);
- int ret;
- struct spi_transfer xfers[] = {
- {
- .tx_buf = st->tx,
- .bits_per_word = 8,
- .len = 2,
- .cs_change = 1,
- .delay_usecs = 35,
- }, {
- .rx_buf = st->rx,
- .bits_per_word = 8,
- .len = 2,
- .cs_change = 1,
- .delay_usecs = 35,
- },
- };
-
- mutex_lock(&st->buf_lock);
- st->tx[0] = ADIS16240_READ_REG(lower_reg_address);
- st->tx[1] = 0;
- st->tx[2] = 0;
- st->tx[3] = 0;
-
- spi_message_init(&msg);
- spi_message_add_tail(&xfers[0], &msg);
- spi_message_add_tail(&xfers[1], &msg);
- ret = spi_sync(st->us, &msg);
- if (ret) {
- dev_err(&st->us->dev,
- "problem when reading 16 bit register 0x%02X",
- lower_reg_address);
- goto error_ret;
- }
- *val = (st->rx[0] << 8) | st->rx[1];
-
-error_ret:
- mutex_unlock(&st->buf_lock);
- return ret;
-}
-
static ssize_t adis16240_spi_read_signed(struct device *dev,
struct device_attribute *attr,
char *buf,
unsigned bits)
{
struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+ struct adis *st = iio_priv(indio_dev);
int ret;
s16 val = 0;
unsigned shift = 16 - bits;
struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
- ret = adis16240_spi_read_reg_16(indio_dev,
+ ret = adis_read_reg_16(st,
this_attr->address, (u16 *)&val);
if (ret)
return ret;
if (val & ADIS16240_ERROR_ACTIVE)
- adis16240_check_status(indio_dev);
+ adis_check_status(st);
val = ((s16)(val << shift) >> shift);
return sprintf(buf, "%d\n", val);
@@ -187,152 +65,16 @@
return ret;
}
-static int adis16240_reset(struct iio_dev *indio_dev)
-{
- int ret;
- ret = adis16240_spi_write_reg_8(indio_dev,
- ADIS16240_GLOB_CMD,
- ADIS16240_GLOB_CMD_SW_RESET);
- if (ret)
- dev_err(&indio_dev->dev, "problem resetting device");
-
- return ret;
-}
-
-int adis16240_set_irq(struct iio_dev *indio_dev, bool enable)
-{
- int ret = 0;
- u16 msc;
-
- ret = adis16240_spi_read_reg_16(indio_dev,
- ADIS16240_MSC_CTRL, &msc);
- if (ret)
- goto error_ret;
-
- msc |= ADIS16240_MSC_CTRL_ACTIVE_HIGH;
- msc &= ~ADIS16240_MSC_CTRL_DATA_RDY_DIO2;
- if (enable)
- msc |= ADIS16240_MSC_CTRL_DATA_RDY_EN;
- else
- msc &= ~ADIS16240_MSC_CTRL_DATA_RDY_EN;
-
- ret = adis16240_spi_write_reg_16(indio_dev,
- ADIS16240_MSC_CTRL, msc);
-
-error_ret:
- return ret;
-}
-
-static int adis16240_self_test(struct iio_dev *indio_dev)
-{
- int ret;
- ret = adis16240_spi_write_reg_16(indio_dev,
- ADIS16240_MSC_CTRL,
- ADIS16240_MSC_CTRL_SELF_TEST_EN);
- if (ret) {
- dev_err(&indio_dev->dev, "problem starting self test");
- goto err_ret;
- }
-
- msleep(ADIS16240_STARTUP_DELAY);
-
- adis16240_check_status(indio_dev);
-
-err_ret:
- return ret;
-}
-
-static int adis16240_check_status(struct iio_dev *indio_dev)
-{
- u16 status;
- int ret;
- struct device *dev = &indio_dev->dev;
-
- ret = adis16240_spi_read_reg_16(indio_dev,
- ADIS16240_DIAG_STAT, &status);
-
- if (ret < 0) {
- dev_err(dev, "Reading status failed\n");
- goto error_ret;
- }
-
- ret = status & 0x2F;
- if (status & ADIS16240_DIAG_STAT_PWRON_FAIL)
- dev_err(dev, "Power-on, self-test fail\n");
- if (status & ADIS16240_DIAG_STAT_SPI_FAIL)
- dev_err(dev, "SPI failure\n");
- if (status & ADIS16240_DIAG_STAT_FLASH_UPT)
- dev_err(dev, "Flash update failed\n");
- if (status & ADIS16240_DIAG_STAT_POWER_HIGH)
- dev_err(dev, "Power supply above 3.625V\n");
- if (status & ADIS16240_DIAG_STAT_POWER_LOW)
- dev_err(dev, "Power supply below 2.225V\n");
-
-error_ret:
- return ret;
-}
-
-static int adis16240_initial_setup(struct iio_dev *indio_dev)
-{
- int ret;
- struct device *dev = &indio_dev->dev;
-
- /* Disable IRQ */
- ret = adis16240_set_irq(indio_dev, false);
- if (ret) {
- dev_err(dev, "disable irq failed");
- goto err_ret;
- }
-
- /* Do self test */
- ret = adis16240_self_test(indio_dev);
- if (ret) {
- dev_err(dev, "self test failure");
- goto err_ret;
- }
-
- /* Read status register to check the result */
- ret = adis16240_check_status(indio_dev);
- if (ret) {
- adis16240_reset(indio_dev);
- dev_err(dev, "device not playing ball -> reset");
- msleep(ADIS16240_STARTUP_DELAY);
- ret = adis16240_check_status(indio_dev);
- if (ret) {
- dev_err(dev, "giving up");
- goto err_ret;
- }
- }
-
-err_ret:
- return ret;
-}
-
static IIO_DEVICE_ATTR(in_accel_xyz_squared_peak_raw, S_IRUGO,
adis16240_read_12bit_signed, NULL,
ADIS16240_XYZPEAK_OUT);
static IIO_CONST_ATTR_SAMP_FREQ_AVAIL("4096");
-enum adis16240_chan {
- in_supply,
- in_aux,
- accel_x,
- accel_y,
- accel_z,
- temp,
-};
-
-static const u8 adis16240_addresses[6][3] = {
- [in_supply] = { ADIS16240_SUPPLY_OUT },
- [in_aux] = { ADIS16240_AUX_ADC },
- [accel_x] = { ADIS16240_XACCL_OUT, ADIS16240_XACCL_OFF,
- ADIS16240_XPEAK_OUT },
- [accel_y] = { ADIS16240_YACCL_OUT, ADIS16240_YACCL_OFF,
- ADIS16240_YPEAK_OUT },
- [accel_z] = { ADIS16240_ZACCL_OUT, ADIS16240_ZACCL_OFF,
- ADIS16240_ZPEAK_OUT },
- [temp] = { ADIS16240_TEMP_OUT },
+static const u8 adis16240_addresses[][2] = {
+ [ADIS16240_SCAN_ACC_X] = { ADIS16240_XACCL_OFF, ADIS16240_XPEAK_OUT },
+ [ADIS16240_SCAN_ACC_Y] = { ADIS16240_YACCL_OFF, ADIS16240_YPEAK_OUT },
+ [ADIS16240_SCAN_ACC_Z] = { ADIS16240_ZACCL_OFF, ADIS16240_ZPEAK_OUT },
};
static int adis16240_read_raw(struct iio_dev *indio_dev,
@@ -340,6 +82,7 @@
int *val, int *val2,
long mask)
{
+ struct adis *st = iio_priv(indio_dev);
int ret;
int bits;
u8 addr;
@@ -347,29 +90,8 @@
switch (mask) {
case IIO_CHAN_INFO_RAW:
- mutex_lock(&indio_dev->mlock);
- addr = adis16240_addresses[chan->address][0];
- ret = adis16240_spi_read_reg_16(indio_dev, addr, &val16);
- if (ret) {
- mutex_unlock(&indio_dev->mlock);
- return ret;
- }
-
- if (val16 & ADIS16240_ERROR_ACTIVE) {
- ret = adis16240_check_status(indio_dev);
- if (ret) {
- mutex_unlock(&indio_dev->mlock);
- return ret;
- }
- }
- val16 = val16 & ((1 << chan->scan_type.realbits) - 1);
- if (chan->scan_type.sign == 's')
- val16 = (s16)(val16 <<
- (16 - chan->scan_type.realbits)) >>
- (16 - chan->scan_type.realbits);
- *val = val16;
- mutex_unlock(&indio_dev->mlock);
- return IIO_VAL_INT;
+ return adis_single_conversion(indio_dev, chan,
+ ADIS16240_ERROR_ACTIVE, val);
case IIO_CHAN_INFO_SCALE:
switch (chan->type) {
case IIO_VOLTAGE:
@@ -402,8 +124,8 @@
case IIO_CHAN_INFO_CALIBBIAS:
bits = 10;
mutex_lock(&indio_dev->mlock);
- addr = adis16240_addresses[chan->address][1];
- ret = adis16240_spi_read_reg_16(indio_dev, addr, &val16);
+ addr = adis16240_addresses[chan->scan_index][0];
+ ret = adis_read_reg_16(st, addr, &val16);
if (ret) {
mutex_unlock(&indio_dev->mlock);
return ret;
@@ -416,8 +138,8 @@
case IIO_CHAN_INFO_PEAK:
bits = 10;
mutex_lock(&indio_dev->mlock);
- addr = adis16240_addresses[chan->address][2];
- ret = adis16240_spi_read_reg_16(indio_dev, addr, &val16);
+ addr = adis16240_addresses[chan->scan_index][1];
+ ret = adis_read_reg_16(st, addr, &val16);
if (ret) {
mutex_unlock(&indio_dev->mlock);
return ret;
@@ -437,104 +159,32 @@
int val2,
long mask)
{
+ struct adis *st = iio_priv(indio_dev);
int bits = 10;
s16 val16;
u8 addr;
switch (mask) {
case IIO_CHAN_INFO_CALIBBIAS:
val16 = val & ((1 << bits) - 1);
- addr = adis16240_addresses[chan->address][1];
- return adis16240_spi_write_reg_16(indio_dev, addr, val16);
+ addr = adis16240_addresses[chan->scan_index][0];
+ return adis_write_reg_16(st, addr, val16);
}
return -EINVAL;
}
static const struct iio_chan_spec adis16240_channels[] = {
- {
- .type = IIO_VOLTAGE,
- .indexed = 1,
- .channel = 0,
- .extend_name = "supply",
- .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
- IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
- .address = in_supply,
- .scan_index = ADIS16240_SCAN_SUPPLY,
- .scan_type = {
- .sign = 'u',
- .realbits = 10,
- .storagebits = 16,
- },
- }, {
- .type = IIO_VOLTAGE,
- .indexed = 1,
- .channel = 1,
- .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
- .address = in_aux,
- .scan_index = ADIS16240_SCAN_AUX_ADC,
- .scan_type = {
- .sign = 'u',
- .realbits = 10,
- .storagebits = 16,
- },
- }, {
- .type = IIO_ACCEL,
- .modified = 1,
- .channel2 = IIO_MOD_X,
- .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
- IIO_CHAN_INFO_SCALE_SHARED_BIT |
+ ADIS_SUPPLY_CHAN(ADIS16240_SUPPLY_OUT, ADIS16240_SCAN_SUPPLY, 10),
+ ADIS_AUX_ADC_CHAN(ADIS16240_AUX_ADC, ADIS16240_SCAN_AUX_ADC, 10),
+ ADIS_ACCEL_CHAN(X, ADIS16240_XACCL_OUT, ADIS16240_SCAN_ACC_X,
IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
- IIO_CHAN_INFO_PEAK_SEPARATE_BIT,
- .address = accel_x,
- .scan_index = ADIS16240_SCAN_ACC_X,
- .scan_type = {
- .sign = 's',
- .realbits = 10,
- .storagebits = 16,
- },
- }, {
- .type = IIO_ACCEL,
- .modified = 1,
- .channel2 = IIO_MOD_Y,
- .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
- IIO_CHAN_INFO_SCALE_SHARED_BIT |
+ IIO_CHAN_INFO_PEAK_SEPARATE_BIT, 10),
+ ADIS_ACCEL_CHAN(Y, ADIS16240_YACCL_OUT, ADIS16240_SCAN_ACC_Y,
IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
- IIO_CHAN_INFO_PEAK_SEPARATE_BIT,
- .address = accel_y,
- .scan_index = ADIS16240_SCAN_ACC_Y,
- .scan_type = {
- .sign = 's',
- .realbits = 10,
- .storagebits = 16,
- },
- }, {
- .type = IIO_ACCEL,
- .modified = 1,
- .channel2 = IIO_MOD_Z,
- .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
- IIO_CHAN_INFO_SCALE_SHARED_BIT |
+ IIO_CHAN_INFO_PEAK_SEPARATE_BIT, 10),
+ ADIS_ACCEL_CHAN(Z, ADIS16240_ZACCL_OUT, ADIS16240_SCAN_ACC_Z,
IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
- IIO_CHAN_INFO_PEAK_SEPARATE_BIT,
- .address = accel_z,
- .scan_index = ADIS16240_SCAN_ACC_Z,
- .scan_type = {
- .sign = 's',
- .realbits = 10,
- .storagebits = 16,
- },
- }, {
- .type = IIO_TEMP,
- .indexed = 1,
- .channel = 0,
- .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
- IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
- .address = temp,
- .scan_index = ADIS16240_SCAN_TEMP,
- .scan_type = {
- .sign = 'u',
- .realbits = 10,
- .storagebits = 16,
- },
- },
+ IIO_CHAN_INFO_PEAK_SEPARATE_BIT, 10),
+ ADIS_TEMP_CHAN(ADIS16240_TEMP_OUT, ADIS16240_SCAN_TEMP, 10),
IIO_CHAN_SOFT_TIMESTAMP(6)
};
@@ -552,13 +202,40 @@
.attrs = &adis16240_attribute_group,
.read_raw = &adis16240_read_raw,
.write_raw = &adis16240_write_raw,
+ .update_scan_mode = adis_update_scan_mode,
.driver_module = THIS_MODULE,
};
-static int __devinit adis16240_probe(struct spi_device *spi)
+static const char * const adis16240_status_error_msgs[] = {
+ [ADIS16240_DIAG_STAT_PWRON_FAIL_BIT] = "Power on, self-test failed",
+ [ADIS16240_DIAG_STAT_SPI_FAIL_BIT] = "SPI failure",
+ [ADIS16240_DIAG_STAT_FLASH_UPT_BIT] = "Flash update failed",
+ [ADIS16240_DIAG_STAT_POWER_HIGH_BIT] = "Power supply above 3.625V",
+ [ADIS16240_DIAG_STAT_POWER_LOW_BIT] = "Power supply below 2.225V",
+};
+
+static const struct adis_data adis16240_data = {
+ .write_delay = 35,
+ .read_delay = 35,
+ .msc_ctrl_reg = ADIS16240_MSC_CTRL,
+ .glob_cmd_reg = ADIS16240_GLOB_CMD,
+ .diag_stat_reg = ADIS16240_DIAG_STAT,
+
+ .self_test_mask = ADIS16240_MSC_CTRL_SELF_TEST_EN,
+ .startup_delay = ADIS16240_STARTUP_DELAY,
+
+ .status_error_msgs = adis16240_status_error_msgs,
+ .status_error_mask = BIT(ADIS16240_DIAG_STAT_PWRON_FAIL_BIT) |
+ BIT(ADIS16240_DIAG_STAT_SPI_FAIL_BIT) |
+ BIT(ADIS16240_DIAG_STAT_FLASH_UPT_BIT) |
+ BIT(ADIS16240_DIAG_STAT_POWER_HIGH_BIT) |
+ BIT(ADIS16240_DIAG_STAT_POWER_LOW_BIT),
+};
+
+static int adis16240_probe(struct spi_device *spi)
{
int ret;
- struct adis16240_state *st;
+ struct adis *st;
struct iio_dev *indio_dev;
/* setup the industrialio driver allocated elements */
@@ -571,9 +248,6 @@
/* this is only used for removal purposes */
spi_set_drvdata(spi, indio_dev);
- st->us = spi;
- mutex_init(&st->buf_lock);
-
indio_dev->name = spi->dev.driver->name;
indio_dev->dev.parent = &spi->dev;
indio_dev->info = &adis16240_info;
@@ -581,54 +255,37 @@
indio_dev->num_channels = ARRAY_SIZE(adis16240_channels);
indio_dev->modes = INDIO_DIRECT_MODE;
- ret = adis16240_configure_ring(indio_dev);
+ ret = adis_init(st, indio_dev, spi, &adis16240_data);
+ if (ret)
+ goto error_free_dev;
+ ret = adis_setup_buffer_and_trigger(st, indio_dev, NULL);
if (ret)
goto error_free_dev;
- ret = iio_buffer_register(indio_dev,
- adis16240_channels,
- ARRAY_SIZE(adis16240_channels));
- if (ret) {
- printk(KERN_ERR "failed to initialize the ring\n");
- goto error_unreg_ring_funcs;
- }
-
- if (spi->irq) {
- ret = adis16240_probe_trigger(indio_dev);
- if (ret)
- goto error_uninitialize_ring;
- }
-
/* Get the device into a sane initial state */
- ret = adis16240_initial_setup(indio_dev);
+ ret = adis_initial_startup(st);
if (ret)
- goto error_remove_trigger;
+ goto error_cleanup_buffer_trigger;
ret = iio_device_register(indio_dev);
if (ret)
- goto error_remove_trigger;
+ goto error_cleanup_buffer_trigger;
return 0;
-error_remove_trigger:
- adis16240_remove_trigger(indio_dev);
-error_uninitialize_ring:
- iio_buffer_unregister(indio_dev);
-error_unreg_ring_funcs:
- adis16240_unconfigure_ring(indio_dev);
+error_cleanup_buffer_trigger:
+ adis_cleanup_buffer_and_trigger(st, indio_dev);
error_free_dev:
iio_device_free(indio_dev);
error_ret:
return ret;
}
-static int __devexit adis16240_remove(struct spi_device *spi)
+static int adis16240_remove(struct spi_device *spi)
{
-
struct iio_dev *indio_dev = spi_get_drvdata(spi);
+ struct adis *st = iio_priv(indio_dev);
iio_device_unregister(indio_dev);
- adis16240_remove_trigger(indio_dev);
- iio_buffer_unregister(indio_dev);
- adis16240_unconfigure_ring(indio_dev);
+ adis_cleanup_buffer_and_trigger(st, indio_dev);
iio_device_free(indio_dev);
return 0;
@@ -640,7 +297,7 @@
.owner = THIS_MODULE,
},
.probe = adis16240_probe,
- .remove = __devexit_p(adis16240_remove),
+ .remove = adis16240_remove,
};
module_spi_driver(adis16240_driver);
diff --git a/drivers/staging/iio/accel/adis16240_ring.c b/drivers/staging/iio/accel/adis16240_ring.c
deleted file mode 100644
index caff8e2..0000000
--- a/drivers/staging/iio/accel/adis16240_ring.c
+++ /dev/null
@@ -1,132 +0,0 @@
-#include <linux/export.h>
-#include <linux/interrupt.h>
-#include <linux/mutex.h>
-#include <linux/kernel.h>
-#include <linux/spi/spi.h>
-#include <linux/slab.h>
-
-#include <linux/iio/iio.h>
-#include "../ring_sw.h"
-#include <linux/iio/trigger_consumer.h>
-#include "adis16240.h"
-
-/**
- * adis16240_read_ring_data() read data registers which will be placed into ring
- * @indio_dev: the IIO device
- * @rx: somewhere to pass back the value read
- **/
-static int adis16240_read_ring_data(struct iio_dev *indio_dev, u8 *rx)
-{
- struct spi_message msg;
- struct adis16240_state *st = iio_priv(indio_dev);
- struct spi_transfer xfers[ADIS16240_OUTPUTS + 1];
- int ret;
- int i;
-
- mutex_lock(&st->buf_lock);
-
- spi_message_init(&msg);
-
- memset(xfers, 0, sizeof(xfers));
- for (i = 0; i <= ADIS16240_OUTPUTS; i++) {
- xfers[i].bits_per_word = 8;
- xfers[i].cs_change = 1;
- xfers[i].len = 2;
- xfers[i].delay_usecs = 30;
- xfers[i].tx_buf = st->tx + 2 * i;
- st->tx[2 * i]
- = ADIS16240_READ_REG(ADIS16240_SUPPLY_OUT + 2 * i);
- st->tx[2 * i + 1] = 0;
- if (i >= 1)
- xfers[i].rx_buf = rx + 2 * (i - 1);
- spi_message_add_tail(&xfers[i], &msg);
- }
-
- ret = spi_sync(st->us, &msg);
- if (ret)
- dev_err(&st->us->dev, "problem when burst reading");
-
- mutex_unlock(&st->buf_lock);
-
- return ret;
-}
-
-static irqreturn_t adis16240_trigger_handler(int irq, void *p)
-{
- struct iio_poll_func *pf = p;
- struct iio_dev *indio_dev = pf->indio_dev;
- struct adis16240_state *st = iio_priv(indio_dev);
-
- int i = 0;
- s16 *data;
-
- data = kmalloc(indio_dev->scan_bytes, GFP_KERNEL);
- if (data == NULL) {
- dev_err(&st->us->dev, "memory alloc failed in ring bh");
- goto done;
- }
-
- if (!bitmap_empty(indio_dev->active_scan_mask, indio_dev->masklength) &&
- adis16240_read_ring_data(indio_dev, st->rx) >= 0)
- for (; i < bitmap_weight(indio_dev->active_scan_mask,
- indio_dev->masklength); i++)
- data[i] = be16_to_cpup((__be16 *)&(st->rx[i*2]));
-
- /* Guaranteed to be aligned with 8 byte boundary */
- if (indio_dev->scan_timestamp)
- *((s64 *)(data + ((i + 3)/4)*4)) = pf->timestamp;
-
- iio_push_to_buffer(indio_dev->buffer, (u8 *)data);
-
- kfree(data);
-done:
- iio_trigger_notify_done(indio_dev->trig);
-
- return IRQ_HANDLED;
-}
-
-void adis16240_unconfigure_ring(struct iio_dev *indio_dev)
-{
- iio_dealloc_pollfunc(indio_dev->pollfunc);
- iio_sw_rb_free(indio_dev->buffer);
-}
-
-static const struct iio_buffer_setup_ops adis16240_ring_setup_ops = {
- .preenable = &iio_sw_buffer_preenable,
- .postenable = &iio_triggered_buffer_postenable,
- .predisable = &iio_triggered_buffer_predisable,
-};
-
-int adis16240_configure_ring(struct iio_dev *indio_dev)
-{
- int ret = 0;
- struct iio_buffer *ring;
-
- ring = iio_sw_rb_allocate(indio_dev);
- if (!ring) {
- ret = -ENOMEM;
- return ret;
- }
- indio_dev->buffer = ring;
- ring->scan_timestamp = true;
- indio_dev->setup_ops = &adis16240_ring_setup_ops;
-
- indio_dev->pollfunc = iio_alloc_pollfunc(&iio_pollfunc_store_time,
- &adis16240_trigger_handler,
- IRQF_ONESHOT,
- indio_dev,
- "%s_consumer%d",
- indio_dev->name,
- indio_dev->id);
- if (indio_dev->pollfunc == NULL) {
- ret = -ENOMEM;
- goto error_iio_sw_rb_free;
- }
-
- indio_dev->modes |= INDIO_BUFFER_TRIGGERED;
- return 0;
-
-error_iio_sw_rb_free:
- iio_sw_rb_free(indio_dev->buffer);
- return ret;
-}
diff --git a/drivers/staging/iio/accel/adis16240_trigger.c b/drivers/staging/iio/accel/adis16240_trigger.c
deleted file mode 100644
index fa90a22..0000000
--- a/drivers/staging/iio/accel/adis16240_trigger.c
+++ /dev/null
@@ -1,82 +0,0 @@
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/spi/spi.h>
-#include <linux/export.h>
-
-#include <linux/iio/iio.h>
-#include <linux/iio/trigger.h>
-#include "adis16240.h"
-
-/**
- * adis16240_data_rdy_trig_poll() the event handler for the data rdy trig
- **/
-static irqreturn_t adis16240_data_rdy_trig_poll(int irq, void *trig)
-{
- iio_trigger_poll(trig, iio_get_time_ns());
- return IRQ_HANDLED;
-}
-
-/**
- * adis16240_data_rdy_trigger_set_state() set datardy interrupt state
- **/
-static int adis16240_data_rdy_trigger_set_state(struct iio_trigger *trig,
- bool state)
-{
- struct iio_dev *indio_dev = trig->private_data;
-
- dev_dbg(&indio_dev->dev, "%s (%d)\n", __func__, state);
- return adis16240_set_irq(indio_dev, state);
-}
-
-static const struct iio_trigger_ops adis16240_trigger_ops = {
- .owner = THIS_MODULE,
- .set_trigger_state = &adis16240_data_rdy_trigger_set_state,
-};
-
-int adis16240_probe_trigger(struct iio_dev *indio_dev)
-{
- int ret;
- struct adis16240_state *st = iio_priv(indio_dev);
-
- st->trig = iio_trigger_alloc("adis16240-dev%d", indio_dev->id);
- if (st->trig == NULL) {
- ret = -ENOMEM;
- goto error_ret;
- }
-
- ret = request_irq(st->us->irq,
- adis16240_data_rdy_trig_poll,
- IRQF_TRIGGER_RISING,
- "adis16240",
- st->trig);
- if (ret)
- goto error_free_trig;
-
- st->trig->dev.parent = &st->us->dev;
- st->trig->ops = &adis16240_trigger_ops;
- st->trig->private_data = indio_dev;
- ret = iio_trigger_register(st->trig);
-
- /* select default trigger */
- indio_dev->trig = st->trig;
- if (ret)
- goto error_free_irq;
-
- return 0;
-
-error_free_irq:
- free_irq(st->us->irq, st->trig);
-error_free_trig:
- iio_trigger_free(st->trig);
-error_ret:
- return ret;
-}
-
-void adis16240_remove_trigger(struct iio_dev *indio_dev)
-{
- struct adis16240_state *st = iio_priv(indio_dev);
-
- iio_trigger_unregister(st->trig);
- free_irq(st->us->irq, st->trig);
- iio_trigger_free(st->trig);
-}
diff --git a/drivers/staging/iio/accel/kxsd9.c b/drivers/staging/iio/accel/kxsd9.c
index fdd5fbd..318331f 100644
--- a/drivers/staging/iio/accel/kxsd9.c
+++ b/drivers/staging/iio/accel/kxsd9.c
@@ -171,7 +171,7 @@
*val2 = kxsd9_micro_scales[ret & KXSD9_FS_MASK];
ret = IIO_VAL_INT_PLUS_MICRO;
break;
- };
+ }
error_ret:
return ret;
@@ -200,7 +200,7 @@
.attrs = kxsd9_attributes,
};
-static int __devinit kxsd9_power_up(struct kxsd9_state *st)
+static int kxsd9_power_up(struct kxsd9_state *st)
{
int ret;
@@ -222,7 +222,7 @@
.driver_module = THIS_MODULE,
};
-static int __devinit kxsd9_probe(struct spi_device *spi)
+static int kxsd9_probe(struct spi_device *spi)
{
struct iio_dev *indio_dev;
struct kxsd9_state *st;
@@ -261,7 +261,7 @@
return ret;
}
-static int __devexit kxsd9_remove(struct spi_device *spi)
+static int kxsd9_remove(struct spi_device *spi)
{
iio_device_unregister(spi_get_drvdata(spi));
iio_device_free(spi_get_drvdata(spi));
@@ -281,7 +281,7 @@
.owner = THIS_MODULE,
},
.probe = kxsd9_probe,
- .remove = __devexit_p(kxsd9_remove),
+ .remove = kxsd9_remove,
.id_table = kxsd9_id,
};
module_spi_driver(kxsd9_driver);
diff --git a/drivers/staging/iio/accel/lis3l02dq.h b/drivers/staging/iio/accel/lis3l02dq.h
index f9bcd41..2bac722 100644
--- a/drivers/staging/iio/accel/lis3l02dq.h
+++ b/drivers/staging/iio/accel/lis3l02dq.h
@@ -158,6 +158,7 @@
struct spi_device *us;
struct iio_trigger *trig;
struct mutex buf_lock;
+ int gpio;
bool trigger_on;
u8 tx[LIS3L02DQ_MAX_RX] ____cacheline_aligned;
diff --git a/drivers/staging/iio/accel/lis3l02dq_core.c b/drivers/staging/iio/accel/lis3l02dq_core.c
index 21b0469..37ed1b8 100644
--- a/drivers/staging/iio/accel/lis3l02dq_core.c
+++ b/drivers/staging/iio/accel/lis3l02dq_core.c
@@ -15,6 +15,7 @@
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/gpio.h>
+#include <linux/of_gpio.h>
#include <linux/mutex.h>
#include <linux/device.h>
#include <linux/kernel.h>
@@ -674,7 +675,7 @@
.attrs = &lis3l02dq_attribute_group,
};
-static int __devinit lis3l02dq_probe(struct spi_device *spi)
+static int lis3l02dq_probe(struct spi_device *spi)
{
int ret;
struct lis3l02dq_state *st;
@@ -690,6 +691,7 @@
spi_set_drvdata(spi, indio_dev);
st->us = spi;
+ st->gpio = of_get_gpio(spi->dev.of_node, 0);
mutex_init(&st->buf_lock);
indio_dev->name = spi->dev.driver->name;
indio_dev->dev.parent = &spi->dev;
@@ -711,7 +713,7 @@
goto error_unreg_buffer_funcs;
}
- if (spi->irq && gpio_is_valid(irq_to_gpio(spi->irq)) > 0) {
+ if (spi->irq) {
ret = request_threaded_irq(st->us->irq,
&lis3l02dq_th,
&lis3l02dq_event_handler,
@@ -738,10 +740,10 @@
return 0;
error_remove_trigger:
- if (spi->irq && gpio_is_valid(irq_to_gpio(spi->irq)))
+ if (spi->irq)
lis3l02dq_remove_trigger(indio_dev);
error_free_interrupt:
- if (spi->irq && gpio_is_valid(irq_to_gpio(spi->irq)) > 0)
+ if (spi->irq)
free_irq(st->us->irq, indio_dev);
error_uninitialize_buffer:
iio_buffer_unregister(indio_dev);
@@ -780,7 +782,7 @@
}
/* fixme, confirm ordering in this function */
-static int __devexit lis3l02dq_remove(struct spi_device *spi)
+static int lis3l02dq_remove(struct spi_device *spi)
{
struct iio_dev *indio_dev = spi_get_drvdata(spi);
struct lis3l02dq_state *st = iio_priv(indio_dev);
@@ -790,7 +792,7 @@
lis3l02dq_disable_all_events(indio_dev);
lis3l02dq_stop_device(indio_dev);
- if (spi->irq && gpio_is_valid(irq_to_gpio(spi->irq)) > 0)
+ if (spi->irq)
free_irq(st->us->irq, indio_dev);
lis3l02dq_remove_trigger(indio_dev);
@@ -808,7 +810,7 @@
.owner = THIS_MODULE,
},
.probe = lis3l02dq_probe,
- .remove = __devexit_p(lis3l02dq_remove),
+ .remove = lis3l02dq_remove,
};
module_spi_driver(lis3l02dq_driver);
diff --git a/drivers/staging/iio/accel/lis3l02dq_ring.c b/drivers/staging/iio/accel/lis3l02dq_ring.c
index fa4190d..bc38651 100644
--- a/drivers/staging/iio/accel/lis3l02dq_ring.c
+++ b/drivers/staging/iio/accel/lis3l02dq_ring.c
@@ -154,7 +154,7 @@
if (indio_dev->scan_timestamp)
*(s64 *)((u8 *)data + ALIGN(len, sizeof(s64)))
= pf->timestamp;
- iio_push_to_buffer(indio_dev->buffer, (u8 *)data);
+ iio_push_to_buffers(indio_dev, (u8 *)data);
kfree(data);
done:
@@ -237,7 +237,7 @@
u8 t;
__lis3l02dq_write_data_ready_config(indio_dev, state);
- if (state == false) {
+ if (!state) {
/*
* A possible quirk with the handler is currently worked around
* by ensuring outstanding read events are cleared.
@@ -263,7 +263,7 @@
/* If gpio still high (or high again)
* In theory possible we will need to do this several times */
for (i = 0; i < 5; i++)
- if (gpio_get_value(irq_to_gpio(st->us->irq)))
+ if (gpio_get_value(st->gpio))
lis3l02dq_read_all(indio_dev, NULL);
else
break;
diff --git a/drivers/staging/iio/accel/sca3000_core.c b/drivers/staging/iio/accel/sca3000_core.c
index ffd1697..414d3ca 100644
--- a/drivers/staging/iio/accel/sca3000_core.c
+++ b/drivers/staging/iio/accel/sca3000_core.c
@@ -1139,7 +1139,7 @@
.driver_module = THIS_MODULE,
};
-static int __devinit sca3000_probe(struct spi_device *spi)
+static int sca3000_probe(struct spi_device *spi)
{
int ret;
struct sca3000_state *st;
@@ -1233,7 +1233,7 @@
return ret;
}
-static int __devexit sca3000_remove(struct spi_device *spi)
+static int sca3000_remove(struct spi_device *spi)
{
struct iio_dev *indio_dev = spi_get_drvdata(spi);
struct sca3000_state *st = iio_priv(indio_dev);
@@ -1265,7 +1265,7 @@
.owner = THIS_MODULE,
},
.probe = sca3000_probe,
- .remove = __devexit_p(sca3000_remove),
+ .remove = sca3000_remove,
.id_table = sca3000_id,
};
module_spi_driver(sca3000_driver);
diff --git a/drivers/staging/iio/adc/Kconfig b/drivers/staging/iio/adc/Kconfig
index a525143..fb8c239 100644
--- a/drivers/staging/iio/adc/Kconfig
+++ b/drivers/staging/iio/adc/Kconfig
@@ -10,17 +10,6 @@
Say yes here to build support for Analog Devices AD7291
8 Channel ADC with temperature sensor.
-config AD7298
- tristate "Analog Devices AD7298 ADC driver"
- depends on SPI
- select IIO_TRIGGERED_BUFFER if IIO_BUFFER
- help
- Say yes here to build support for Analog Devices AD7298
- 8 Channel ADC with temperature sensor.
-
- To compile this driver as a module, choose M here: the
- module will be called ad7298.
-
config AD7606
tristate "Analog Devices AD7606 ADC driver"
depends on GPIOLIB
@@ -68,19 +57,6 @@
Say yes here to include ring buffer support in the AD799X
ADC driver.
-config AD7887
- tristate "Analog Devices AD7887 ADC driver"
- depends on SPI
- select IIO_BUFFER
- select IIO_TRIGGERED_BUFFER
- help
- Say yes here to build support for Analog Devices
- AD7887 SPI analog to digital converter (ADC).
- If unsure, say N (but it's safe to say "Y").
-
- To compile this driver as a module, choose M here: the
- module will be called ad7887.
-
config AD7780
tristate "Analog Devices AD7780 and similar ADCs driver"
depends on SPI
@@ -94,18 +70,6 @@
To compile this driver as a module, choose M here: the
module will be called ad7780.
-config AD7793
- tristate "Analog Devices AD7793 and similar ADCs driver"
- depends on SPI
- select AD_SIGMA_DELTA
- help
- Say yes here to build support for Analog Devices AD7785, AD7792, AD7793,
- AD7794 and AD7795 SPI analog to digital converters (ADC).
- If unsure, say N (but it's safe to say "Y").
-
- To compile this driver as a module, choose M here: the
- module will be called AD7793.
-
config AD7816
tristate "Analog Devices AD7816/7/8 temperature sensor and ADC driver"
depends on SPI
@@ -126,18 +90,11 @@
To compile this driver as a module, choose M here: the
module will be called ad7192.
-config ADT7310
- tristate "Analog Devices ADT7310 temperature sensor driver"
- depends on SPI
- help
- Say yes here to build support for Analog Devices ADT7310
- temperature sensors.
-
config ADT7410
- tristate "Analog Devices ADT7410 temperature sensor driver"
- depends on I2C
+ tristate "Analog Devices ADT7310/ADT7410 temperature sensor driver"
+ depends on I2C || SPI_MASTER
help
- Say yes here to build support for Analog Devices ADT7410
+ Say yes here to build support for Analog Devices ADT7310/ADT7410
temperature sensors.
config AD7280
@@ -150,30 +107,6 @@
To compile this driver as a module, choose M here: the
module will be called ad7280a
-config MAX1363
- tristate "Maxim max1363 ADC driver"
- depends on I2C
- select IIO_TRIGGER if IIO_BUFFER
- select MAX1363_RING_BUFFER
- help
- Say yes here to build support for many Maxim i2c analog to digital
- converters (ADC). (max1361, max1362, max1363, max1364, max1036,
- max1037, max1038, max1039, max1136, max1136, max1137, max1138,
- max1139, max1236, max1237, max11238, max1239, max11600, max11601,
- max11602, max11603, max11604, max11605, max11606, max11607,
- max11608, max11609, max11610, max11611, max11612, max11613,
- max11614, max11615, max11616, max11617, max11644, max11645,
- max11646, max11647) Provides direct access via sysfs.
-
-config MAX1363_RING_BUFFER
- bool "Maxim max1363: use ring buffer"
- depends on MAX1363
- select IIO_BUFFER
- select IIO_SW_RING
- help
- Say yes here to include ring buffer support in the MAX1363
- ADC driver.
-
config LPC32XX_ADC
tristate "NXP LPC32XX ADC"
depends on ARCH_LPC32XX
diff --git a/drivers/staging/iio/adc/Makefile b/drivers/staging/iio/adc/Makefile
index 62ee02e..d285596 100644
--- a/drivers/staging/iio/adc/Makefile
+++ b/drivers/staging/iio/adc/Makefile
@@ -2,11 +2,6 @@
# Makefile for industrial I/O ADC drivers
#
-max1363-y := max1363_core.o
-max1363-y += max1363_ring.o
-
-obj-$(CONFIG_MAX1363) += max1363.o
-
ad7606-y := ad7606_core.o
ad7606-$(CONFIG_IIO_BUFFER) += ad7606_ring.o
ad7606-$(CONFIG_AD7606_IFACE_PARALLEL) += ad7606_par.o
@@ -17,20 +12,10 @@
ad799x-$(CONFIG_AD799X_RING_BUFFER) += ad799x_ring.o
obj-$(CONFIG_AD799X) += ad799x.o
-ad7887-y := ad7887_core.o
-ad7887-$(CONFIG_IIO_BUFFER) += ad7887_ring.o
-obj-$(CONFIG_AD7887) += ad7887.o
-
-ad7298-y := ad7298_core.o
-ad7298-$(CONFIG_IIO_BUFFER) += ad7298_ring.o
-obj-$(CONFIG_AD7298) += ad7298.o
-
obj-$(CONFIG_AD7291) += ad7291.o
obj-$(CONFIG_AD7780) += ad7780.o
-obj-$(CONFIG_AD7793) += ad7793.o
obj-$(CONFIG_AD7816) += ad7816.o
obj-$(CONFIG_AD7192) += ad7192.o
-obj-$(CONFIG_ADT7310) += adt7310.o
obj-$(CONFIG_ADT7410) += adt7410.o
obj-$(CONFIG_AD7280) += ad7280a.o
obj-$(CONFIG_LPC32XX_ADC) += lpc32xx_adc.o
diff --git a/drivers/staging/iio/adc/ad7192.c b/drivers/staging/iio/adc/ad7192.c
index aeaa61d..5047019 100644
--- a/drivers/staging/iio/adc/ad7192.c
+++ b/drivers/staging/iio/adc/ad7192.c
@@ -606,7 +606,7 @@
IIO_CHAN_SOFT_TIMESTAMP(8),
};
-static int __devinit ad7192_probe(struct spi_device *spi)
+static int ad7192_probe(struct spi_device *spi)
{
const struct ad7192_platform_data *pdata = spi->dev.platform_data;
struct ad7192_state *st;
@@ -686,7 +686,7 @@
return ret;
}
-static int __devexit ad7192_remove(struct spi_device *spi)
+static int ad7192_remove(struct spi_device *spi)
{
struct iio_dev *indio_dev = spi_get_drvdata(spi);
struct ad7192_state *st = iio_priv(indio_dev);
@@ -716,7 +716,7 @@
.owner = THIS_MODULE,
},
.probe = ad7192_probe,
- .remove = __devexit_p(ad7192_remove),
+ .remove = ad7192_remove,
.id_table = ad7192_id,
};
module_spi_driver(ad7192_driver);
diff --git a/drivers/staging/iio/adc/ad7280a.c b/drivers/staging/iio/adc/ad7280a.c
index cfc39a7..fa81a49 100644
--- a/drivers/staging/iio/adc/ad7280a.c
+++ b/drivers/staging/iio/adc/ad7280a.c
@@ -117,7 +117,7 @@
*/
#define POLYNOM 0x2F
#define POLYNOM_ORDER 8
-#define HIGHBIT 1 << (POLYNOM_ORDER - 1);
+#define HIGHBIT (1 << (POLYNOM_ORDER - 1))
struct ad7280_state {
struct spi_device *spi;
@@ -832,7 +832,7 @@
.thermistor_term_en = true,
};
-static int __devinit ad7280_probe(struct spi_device *spi)
+static int ad7280_probe(struct spi_device *spi)
{
const struct ad7280_platform_data *pdata = spi->dev.platform_data;
struct ad7280_state *st;
@@ -950,7 +950,7 @@
return ret;
}
-static int __devexit ad7280_remove(struct spi_device *spi)
+static int ad7280_remove(struct spi_device *spi)
{
struct iio_dev *indio_dev = spi_get_drvdata(spi);
struct ad7280_state *st = iio_priv(indio_dev);
@@ -981,7 +981,7 @@
.owner = THIS_MODULE,
},
.probe = ad7280_probe,
- .remove = __devexit_p(ad7280_remove),
+ .remove = ad7280_remove,
.id_table = ad7280_id,
};
module_spi_driver(ad7280_driver);
diff --git a/drivers/staging/iio/adc/ad7291.c b/drivers/staging/iio/adc/ad7291.c
index 029b39c..6e58e36 100644
--- a/drivers/staging/iio/adc/ad7291.c
+++ b/drivers/staging/iio/adc/ad7291.c
@@ -580,7 +580,7 @@
.event_attrs = &ad7291_event_attribute_group,
};
-static int __devinit ad7291_probe(struct i2c_client *client,
+static int ad7291_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct ad7291_chip_info *chip;
@@ -674,7 +674,7 @@
return ret;
}
-static int __devexit ad7291_remove(struct i2c_client *client)
+static int ad7291_remove(struct i2c_client *client)
{
struct iio_dev *indio_dev = i2c_get_clientdata(client);
struct ad7291_chip_info *chip = iio_priv(indio_dev);
@@ -706,7 +706,7 @@
.name = KBUILD_MODNAME,
},
.probe = ad7291_probe,
- .remove = __devexit_p(ad7291_remove),
+ .remove = ad7291_remove,
.id_table = ad7291_id,
};
module_i2c_driver(ad7291_driver);
diff --git a/drivers/staging/iio/adc/ad7298.h b/drivers/staging/iio/adc/ad7298.h
deleted file mode 100644
index 18f2787..0000000
--- a/drivers/staging/iio/adc/ad7298.h
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * AD7298 SPI ADC driver
- *
- * Copyright 2011 Analog Devices Inc.
- *
- * Licensed under the GPL-2.
- */
-
-#ifndef IIO_ADC_AD7298_H_
-#define IIO_ADC_AD7298_H_
-
-#define AD7298_WRITE (1 << 15) /* write to the control register */
-#define AD7298_REPEAT (1 << 14) /* repeated conversion enable */
-#define AD7298_CH(x) (1 << (13 - (x))) /* channel select */
-#define AD7298_TSENSE (1 << 5) /* temperature conversion enable */
-#define AD7298_EXTREF (1 << 2) /* external reference enable */
-#define AD7298_TAVG (1 << 1) /* temperature sensor averaging enable */
-#define AD7298_PDD (1 << 0) /* partial power down enable */
-
-#define AD7298_MAX_CHAN 8
-#define AD7298_BITS 12
-#define AD7298_STORAGE_BITS 16
-#define AD7298_INTREF_mV 2500
-
-#define AD7298_CH_TEMP 9
-
-#define RES_MASK(bits) ((1 << (bits)) - 1)
-
-/*
- * TODO: struct ad7298_platform_data needs to go into include/linux/iio
- */
-
-struct ad7298_platform_data {
- /* External Vref voltage applied */
- u16 vref_mv;
-};
-
-struct ad7298_state {
- struct spi_device *spi;
- struct regulator *reg;
- u16 int_vref_mv;
- unsigned ext_ref;
- struct spi_transfer ring_xfer[10];
- struct spi_transfer scan_single_xfer[3];
- struct spi_message ring_msg;
- struct spi_message scan_single_msg;
- /*
- * DMA (thus cache coherency maintenance) requires the
- * transfer buffers to live in their own cache lines.
- */
- unsigned short rx_buf[8] ____cacheline_aligned;
- unsigned short tx_buf[2];
-};
-
-#ifdef CONFIG_IIO_BUFFER
-int ad7298_register_ring_funcs_and_init(struct iio_dev *indio_dev);
-void ad7298_ring_cleanup(struct iio_dev *indio_dev);
-int ad7298_update_scan_mode(struct iio_dev *indio_dev,
- const unsigned long *active_scan_mask);
-#else /* CONFIG_IIO_BUFFER */
-
-static inline int
-ad7298_register_ring_funcs_and_init(struct iio_dev *indio_dev)
-{
- return 0;
-}
-
-static inline void ad7298_ring_cleanup(struct iio_dev *indio_dev)
-{
-}
-
-#define ad7298_update_scan_mode NULL
-
-#endif /* CONFIG_IIO_BUFFER */
-#endif /* IIO_ADC_AD7298_H_ */
diff --git a/drivers/staging/iio/adc/ad7298_core.c b/drivers/staging/iio/adc/ad7298_core.c
deleted file mode 100644
index 4c75114..0000000
--- a/drivers/staging/iio/adc/ad7298_core.c
+++ /dev/null
@@ -1,289 +0,0 @@
-/*
- * AD7298 SPI ADC driver
- *
- * Copyright 2011 Analog Devices Inc.
- *
- * Licensed under the GPL-2.
- */
-
-#include <linux/device.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/sysfs.h>
-#include <linux/spi/spi.h>
-#include <linux/regulator/consumer.h>
-#include <linux/err.h>
-#include <linux/delay.h>
-#include <linux/module.h>
-
-#include <linux/iio/iio.h>
-#include <linux/iio/sysfs.h>
-#include <linux/iio/buffer.h>
-
-#include "ad7298.h"
-
-#define AD7298_V_CHAN(index) \
- { \
- .type = IIO_VOLTAGE, \
- .indexed = 1, \
- .channel = index, \
- .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | \
- IIO_CHAN_INFO_SCALE_SHARED_BIT, \
- .address = index, \
- .scan_index = index, \
- .scan_type = { \
- .sign = 'u', \
- .realbits = 12, \
- .storagebits = 16, \
- }, \
- }
-
-static const struct iio_chan_spec ad7298_channels[] = {
- {
- .type = IIO_TEMP,
- .indexed = 1,
- .channel = 0,
- .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
- IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
- .address = AD7298_CH_TEMP,
- .scan_index = -1,
- .scan_type = {
- .sign = 's',
- .realbits = 32,
- .storagebits = 32,
- },
- },
- AD7298_V_CHAN(0),
- AD7298_V_CHAN(1),
- AD7298_V_CHAN(2),
- AD7298_V_CHAN(3),
- AD7298_V_CHAN(4),
- AD7298_V_CHAN(5),
- AD7298_V_CHAN(6),
- AD7298_V_CHAN(7),
- IIO_CHAN_SOFT_TIMESTAMP(8),
-};
-
-static int ad7298_scan_direct(struct ad7298_state *st, unsigned ch)
-{
- int ret;
- st->tx_buf[0] = cpu_to_be16(AD7298_WRITE | st->ext_ref |
- (AD7298_CH(0) >> ch));
-
- ret = spi_sync(st->spi, &st->scan_single_msg);
- if (ret)
- return ret;
-
- return be16_to_cpu(st->rx_buf[0]);
-}
-
-static int ad7298_scan_temp(struct ad7298_state *st, int *val)
-{
- int tmp, ret;
- __be16 buf;
-
- buf = cpu_to_be16(AD7298_WRITE | AD7298_TSENSE |
- AD7298_TAVG | st->ext_ref);
-
- ret = spi_write(st->spi, (u8 *)&buf, 2);
- if (ret)
- return ret;
-
- buf = cpu_to_be16(0);
-
- ret = spi_write(st->spi, (u8 *)&buf, 2);
- if (ret)
- return ret;
-
- usleep_range(101, 1000); /* sleep > 100us */
-
- ret = spi_read(st->spi, (u8 *)&buf, 2);
- if (ret)
- return ret;
-
- tmp = be16_to_cpu(buf) & RES_MASK(AD7298_BITS);
-
- /*
- * One LSB of the ADC corresponds to 0.25 deg C.
- * The temperature reading is in 12-bit twos complement format
- */
-
- if (tmp & (1 << (AD7298_BITS - 1))) {
- tmp = (4096 - tmp) * 250;
- tmp -= (2 * tmp);
-
- } else {
- tmp *= 250; /* temperature in milli degrees Celsius */
- }
-
- *val = tmp;
-
- return 0;
-}
-
-static int ad7298_read_raw(struct iio_dev *indio_dev,
- struct iio_chan_spec const *chan,
- int *val,
- int *val2,
- long m)
-{
- int ret;
- struct ad7298_state *st = iio_priv(indio_dev);
- unsigned int scale_uv;
-
- switch (m) {
- case IIO_CHAN_INFO_RAW:
- mutex_lock(&indio_dev->mlock);
- if (indio_dev->currentmode == INDIO_BUFFER_TRIGGERED) {
- ret = -EBUSY;
- } else {
- if (chan->address == AD7298_CH_TEMP)
- ret = ad7298_scan_temp(st, val);
- else
- ret = ad7298_scan_direct(st, chan->address);
- }
- mutex_unlock(&indio_dev->mlock);
-
- if (ret < 0)
- return ret;
-
- if (chan->address != AD7298_CH_TEMP)
- *val = ret & RES_MASK(AD7298_BITS);
-
- return IIO_VAL_INT;
- case IIO_CHAN_INFO_SCALE:
- switch (chan->type) {
- case IIO_VOLTAGE:
- scale_uv = (st->int_vref_mv * 1000) >> AD7298_BITS;
- *val = scale_uv / 1000;
- *val2 = (scale_uv % 1000) * 1000;
- return IIO_VAL_INT_PLUS_MICRO;
- case IIO_TEMP:
- *val = 1;
- *val2 = 0;
- return IIO_VAL_INT_PLUS_MICRO;
- default:
- return -EINVAL;
- }
- }
- return -EINVAL;
-}
-
-static const struct iio_info ad7298_info = {
- .read_raw = &ad7298_read_raw,
- .update_scan_mode = ad7298_update_scan_mode,
- .driver_module = THIS_MODULE,
-};
-
-static int __devinit ad7298_probe(struct spi_device *spi)
-{
- struct ad7298_platform_data *pdata = spi->dev.platform_data;
- struct ad7298_state *st;
- int ret;
- struct iio_dev *indio_dev = iio_device_alloc(sizeof(*st));
-
- if (indio_dev == NULL)
- return -ENOMEM;
-
- st = iio_priv(indio_dev);
-
- st->reg = regulator_get(&spi->dev, "vcc");
- if (!IS_ERR(st->reg)) {
- ret = regulator_enable(st->reg);
- if (ret)
- goto error_put_reg;
- }
-
- spi_set_drvdata(spi, indio_dev);
-
- st->spi = spi;
-
- indio_dev->name = spi_get_device_id(spi)->name;
- indio_dev->dev.parent = &spi->dev;
- indio_dev->modes = INDIO_DIRECT_MODE;
- indio_dev->channels = ad7298_channels;
- indio_dev->num_channels = ARRAY_SIZE(ad7298_channels);
- indio_dev->info = &ad7298_info;
-
- /* Setup default message */
-
- st->scan_single_xfer[0].tx_buf = &st->tx_buf[0];
- st->scan_single_xfer[0].len = 2;
- st->scan_single_xfer[0].cs_change = 1;
- st->scan_single_xfer[1].tx_buf = &st->tx_buf[1];
- st->scan_single_xfer[1].len = 2;
- st->scan_single_xfer[1].cs_change = 1;
- st->scan_single_xfer[2].rx_buf = &st->rx_buf[0];
- st->scan_single_xfer[2].len = 2;
-
- spi_message_init(&st->scan_single_msg);
- spi_message_add_tail(&st->scan_single_xfer[0], &st->scan_single_msg);
- spi_message_add_tail(&st->scan_single_xfer[1], &st->scan_single_msg);
- spi_message_add_tail(&st->scan_single_xfer[2], &st->scan_single_msg);
-
- if (pdata && pdata->vref_mv) {
- st->int_vref_mv = pdata->vref_mv;
- st->ext_ref = AD7298_EXTREF;
- } else {
- st->int_vref_mv = AD7298_INTREF_mV;
- }
-
- ret = ad7298_register_ring_funcs_and_init(indio_dev);
- if (ret)
- goto error_disable_reg;
-
- ret = iio_device_register(indio_dev);
- if (ret)
- goto error_cleanup_ring;
-
- return 0;
-
-error_cleanup_ring:
- ad7298_ring_cleanup(indio_dev);
-error_disable_reg:
- if (!IS_ERR(st->reg))
- regulator_disable(st->reg);
-error_put_reg:
- if (!IS_ERR(st->reg))
- regulator_put(st->reg);
- iio_device_free(indio_dev);
-
- return ret;
-}
-
-static int __devexit ad7298_remove(struct spi_device *spi)
-{
- struct iio_dev *indio_dev = spi_get_drvdata(spi);
- struct ad7298_state *st = iio_priv(indio_dev);
-
- iio_device_unregister(indio_dev);
- ad7298_ring_cleanup(indio_dev);
- if (!IS_ERR(st->reg)) {
- regulator_disable(st->reg);
- regulator_put(st->reg);
- }
- iio_device_free(indio_dev);
-
- return 0;
-}
-
-static const struct spi_device_id ad7298_id[] = {
- {"ad7298", 0},
- {}
-};
-MODULE_DEVICE_TABLE(spi, ad7298_id);
-
-static struct spi_driver ad7298_driver = {
- .driver = {
- .name = "ad7298",
- .owner = THIS_MODULE,
- },
- .probe = ad7298_probe,
- .remove = __devexit_p(ad7298_remove),
- .id_table = ad7298_id,
-};
-module_spi_driver(ad7298_driver);
-
-MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
-MODULE_DESCRIPTION("Analog Devices AD7298 ADC");
-MODULE_LICENSE("GPL v2");
diff --git a/drivers/staging/iio/adc/ad7298_ring.c b/drivers/staging/iio/adc/ad7298_ring.c
deleted file mode 100644
index c2906a8..0000000
--- a/drivers/staging/iio/adc/ad7298_ring.c
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * AD7298 SPI ADC driver
- *
- * Copyright 2011-2012 Analog Devices Inc.
- *
- * Licensed under the GPL-2.
- */
-
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/spi/spi.h>
-
-#include <linux/iio/iio.h>
-#include <linux/iio/buffer.h>
-#include <linux/iio/trigger_consumer.h>
-#include <linux/iio/triggered_buffer.h>
-
-#include "ad7298.h"
-
-/**
- * ad7298_update_scan_mode() setup the spi transfer buffer for the new scan mask
- **/
-int ad7298_update_scan_mode(struct iio_dev *indio_dev,
- const unsigned long *active_scan_mask)
-{
- struct ad7298_state *st = iio_priv(indio_dev);
- int i, m;
- unsigned short command;
- int scan_count;
-
- /* Now compute overall size */
- scan_count = bitmap_weight(active_scan_mask, indio_dev->masklength);
-
- command = AD7298_WRITE | st->ext_ref;
-
- for (i = 0, m = AD7298_CH(0); i < AD7298_MAX_CHAN; i++, m >>= 1)
- if (test_bit(i, active_scan_mask))
- command |= m;
-
- st->tx_buf[0] = cpu_to_be16(command);
-
- /* build spi ring message */
- st->ring_xfer[0].tx_buf = &st->tx_buf[0];
- st->ring_xfer[0].len = 2;
- st->ring_xfer[0].cs_change = 1;
- st->ring_xfer[1].tx_buf = &st->tx_buf[1];
- st->ring_xfer[1].len = 2;
- st->ring_xfer[1].cs_change = 1;
-
- spi_message_init(&st->ring_msg);
- spi_message_add_tail(&st->ring_xfer[0], &st->ring_msg);
- spi_message_add_tail(&st->ring_xfer[1], &st->ring_msg);
-
- for (i = 0; i < scan_count; i++) {
- st->ring_xfer[i + 2].rx_buf = &st->rx_buf[i];
- st->ring_xfer[i + 2].len = 2;
- st->ring_xfer[i + 2].cs_change = 1;
- spi_message_add_tail(&st->ring_xfer[i + 2], &st->ring_msg);
- }
- /* make sure last transfer cs_change is not set */
- st->ring_xfer[i + 1].cs_change = 0;
-
- return 0;
-}
-
-/**
- * ad7298_trigger_handler() bh of trigger launched polling to ring buffer
- *
- * Currently there is no option in this driver to disable the saving of
- * timestamps within the ring.
- **/
-static irqreturn_t ad7298_trigger_handler(int irq, void *p)
-{
- struct iio_poll_func *pf = p;
- struct iio_dev *indio_dev = pf->indio_dev;
- struct ad7298_state *st = iio_priv(indio_dev);
- s64 time_ns = 0;
- __u16 buf[16];
- int b_sent, i;
-
- b_sent = spi_sync(st->spi, &st->ring_msg);
- if (b_sent)
- goto done;
-
- if (indio_dev->scan_timestamp) {
- time_ns = iio_get_time_ns();
- memcpy((u8 *)buf + indio_dev->scan_bytes - sizeof(s64),
- &time_ns, sizeof(time_ns));
- }
-
- for (i = 0; i < bitmap_weight(indio_dev->active_scan_mask,
- indio_dev->masklength); i++)
- buf[i] = be16_to_cpu(st->rx_buf[i]);
-
- iio_push_to_buffer(indio_dev->buffer, (u8 *)buf);
-
-done:
- iio_trigger_notify_done(indio_dev->trig);
-
- return IRQ_HANDLED;
-}
-
-int ad7298_register_ring_funcs_and_init(struct iio_dev *indio_dev)
-{
- return iio_triggered_buffer_setup(indio_dev, NULL,
- &ad7298_trigger_handler, NULL);
-}
-
-void ad7298_ring_cleanup(struct iio_dev *indio_dev)
-{
- iio_triggered_buffer_cleanup(indio_dev);
-}
diff --git a/drivers/staging/iio/adc/ad7606_par.c b/drivers/staging/iio/adc/ad7606_par.c
index a53faaf..58cfdde 100644
--- a/drivers/staging/iio/adc/ad7606_par.c
+++ b/drivers/staging/iio/adc/ad7606_par.c
@@ -47,7 +47,7 @@
.read_block = ad7606_par8_read_block,
};
-static int __devinit ad7606_par_probe(struct platform_device *pdev)
+static int ad7606_par_probe(struct platform_device *pdev)
{
struct resource *res;
struct iio_dev *indio_dev;
@@ -100,7 +100,7 @@
return ret;
}
-static int __devexit ad7606_par_remove(struct platform_device *pdev)
+static int ad7606_par_remove(struct platform_device *pdev)
{
struct iio_dev *indio_dev = platform_get_drvdata(pdev);
struct resource *res;
@@ -164,7 +164,7 @@
static struct platform_driver ad7606_driver = {
.probe = ad7606_par_probe,
- .remove = __devexit_p(ad7606_par_remove),
+ .remove = ad7606_par_remove,
.id_table = ad7606_driver_ids,
.driver = {
.name = "ad7606",
diff --git a/drivers/staging/iio/adc/ad7606_ring.c b/drivers/staging/iio/adc/ad7606_ring.c
index ba04d0f..2b25cb0 100644
--- a/drivers/staging/iio/adc/ad7606_ring.c
+++ b/drivers/staging/iio/adc/ad7606_ring.c
@@ -83,7 +83,7 @@
if (indio_dev->scan_timestamp)
*((s64 *)(buf + indio_dev->scan_bytes - sizeof(s64))) = time_ns;
- iio_push_to_buffer(indio_dev->buffer, buf);
+ iio_push_to_buffers(indio_dev, buf);
done:
gpio_set_value(st->pdata->gpio_convst, 0);
iio_trigger_notify_done(indio_dev->trig);
diff --git a/drivers/staging/iio/adc/ad7606_spi.c b/drivers/staging/iio/adc/ad7606_spi.c
index 099d347..6a8ecd7 100644
--- a/drivers/staging/iio/adc/ad7606_spi.c
+++ b/drivers/staging/iio/adc/ad7606_spi.c
@@ -39,7 +39,7 @@
.read_block = ad7606_spi_read_block,
};
-static int __devinit ad7606_spi_probe(struct spi_device *spi)
+static int ad7606_spi_probe(struct spi_device *spi)
{
struct iio_dev *indio_dev;
@@ -55,7 +55,7 @@
return 0;
}
-static int __devexit ad7606_spi_remove(struct spi_device *spi)
+static int ad7606_spi_remove(struct spi_device *spi)
{
struct iio_dev *indio_dev = dev_get_drvdata(&spi->dev);
@@ -106,7 +106,7 @@
.pm = AD7606_SPI_PM_OPS,
},
.probe = ad7606_spi_probe,
- .remove = __devexit_p(ad7606_spi_remove),
+ .remove = ad7606_spi_remove,
.id_table = ad7606_id,
};
module_spi_driver(ad7606_driver);
diff --git a/drivers/staging/iio/adc/ad7780.c b/drivers/staging/iio/adc/ad7780.c
index 0a1328b..e1f8860 100644
--- a/drivers/staging/iio/adc/ad7780.c
+++ b/drivers/staging/iio/adc/ad7780.c
@@ -164,7 +164,7 @@
.driver_module = THIS_MODULE,
};
-static int __devinit ad7780_probe(struct spi_device *spi)
+static int ad7780_probe(struct spi_device *spi)
{
struct ad7780_platform_data *pdata = spi->dev.platform_data;
struct ad7780_state *st;
@@ -248,7 +248,7 @@
return ret;
}
-static int __devexit ad7780_remove(struct spi_device *spi)
+static int ad7780_remove(struct spi_device *spi)
{
struct iio_dev *indio_dev = spi_get_drvdata(spi);
struct ad7780_state *st = iio_priv(indio_dev);
@@ -283,7 +283,7 @@
.owner = THIS_MODULE,
},
.probe = ad7780_probe,
- .remove = __devexit_p(ad7780_remove),
+ .remove = ad7780_remove,
.id_table = ad7780_id,
};
module_spi_driver(ad7780_driver);
diff --git a/drivers/staging/iio/adc/ad7793.c b/drivers/staging/iio/adc/ad7793.c
deleted file mode 100644
index 691a7be..0000000
--- a/drivers/staging/iio/adc/ad7793.c
+++ /dev/null
@@ -1,566 +0,0 @@
-/*
- * AD7785/AD7792/AD7793/AD7794/AD7795 SPI ADC driver
- *
- * Copyright 2011-2012 Analog Devices Inc.
- *
- * Licensed under the GPL-2.
- */
-
-#include <linux/interrupt.h>
-#include <linux/device.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/sysfs.h>
-#include <linux/spi/spi.h>
-#include <linux/regulator/consumer.h>
-#include <linux/err.h>
-#include <linux/sched.h>
-#include <linux/delay.h>
-#include <linux/module.h>
-
-#include <linux/iio/iio.h>
-#include <linux/iio/sysfs.h>
-#include <linux/iio/buffer.h>
-#include <linux/iio/trigger.h>
-#include <linux/iio/trigger_consumer.h>
-#include <linux/iio/triggered_buffer.h>
-#include <linux/iio/adc/ad_sigma_delta.h>
-
-#include "ad7793.h"
-
-/* NOTE:
- * The AD7792/AD7793 features a dual use data out ready DOUT/RDY output.
- * In order to avoid contentions on the SPI bus, it's therefore necessary
- * to use spi bus locking.
- *
- * The DOUT/RDY output must also be wired to an interrupt capable GPIO.
- */
-
-struct ad7793_chip_info {
- const struct iio_chan_spec *channels;
- unsigned int num_channels;
-};
-
-struct ad7793_state {
- const struct ad7793_chip_info *chip_info;
- struct regulator *reg;
- u16 int_vref_mv;
- u16 mode;
- u16 conf;
- u32 scale_avail[8][2];
-
- struct ad_sigma_delta sd;
-
-};
-
-enum ad7793_supported_device_ids {
- ID_AD7785,
- ID_AD7792,
- ID_AD7793,
- ID_AD7794,
- ID_AD7795,
-};
-
-static struct ad7793_state *ad_sigma_delta_to_ad7793(struct ad_sigma_delta *sd)
-{
- return container_of(sd, struct ad7793_state, sd);
-}
-
-static int ad7793_set_channel(struct ad_sigma_delta *sd, unsigned int channel)
-{
- struct ad7793_state *st = ad_sigma_delta_to_ad7793(sd);
-
- st->conf &= ~AD7793_CONF_CHAN_MASK;
- st->conf |= AD7793_CONF_CHAN(channel);
-
- return ad_sd_write_reg(&st->sd, AD7793_REG_CONF, 2, st->conf);
-}
-
-static int ad7793_set_mode(struct ad_sigma_delta *sd,
- enum ad_sigma_delta_mode mode)
-{
- struct ad7793_state *st = ad_sigma_delta_to_ad7793(sd);
-
- st->mode &= ~AD7793_MODE_SEL_MASK;
- st->mode |= AD7793_MODE_SEL(mode);
-
- return ad_sd_write_reg(&st->sd, AD7793_REG_MODE, 2, st->mode);
-}
-
-static const struct ad_sigma_delta_info ad7793_sigma_delta_info = {
- .set_channel = ad7793_set_channel,
- .set_mode = ad7793_set_mode,
- .has_registers = true,
- .addr_shift = 3,
- .read_mask = BIT(6),
-};
-
-static const struct ad_sd_calib_data ad7793_calib_arr[6] = {
- {AD7793_MODE_CAL_INT_ZERO, AD7793_CH_AIN1P_AIN1M},
- {AD7793_MODE_CAL_INT_FULL, AD7793_CH_AIN1P_AIN1M},
- {AD7793_MODE_CAL_INT_ZERO, AD7793_CH_AIN2P_AIN2M},
- {AD7793_MODE_CAL_INT_FULL, AD7793_CH_AIN2P_AIN2M},
- {AD7793_MODE_CAL_INT_ZERO, AD7793_CH_AIN3P_AIN3M},
- {AD7793_MODE_CAL_INT_FULL, AD7793_CH_AIN3P_AIN3M}
-};
-
-static int ad7793_calibrate_all(struct ad7793_state *st)
-{
- return ad_sd_calibrate_all(&st->sd, ad7793_calib_arr,
- ARRAY_SIZE(ad7793_calib_arr));
-}
-
-static int ad7793_setup(struct iio_dev *indio_dev,
- const struct ad7793_platform_data *pdata)
-{
- struct ad7793_state *st = iio_priv(indio_dev);
- int i, ret = -1;
- unsigned long long scale_uv;
- u32 id;
-
- /* reset the serial interface */
- ret = spi_write(st->sd.spi, (u8 *)&ret, sizeof(ret));
- if (ret < 0)
- goto out;
- msleep(1); /* Wait for at least 500us */
-
- /* write/read test for device presence */
- ret = ad_sd_read_reg(&st->sd, AD7793_REG_ID, 1, &id);
- if (ret)
- goto out;
-
- id &= AD7793_ID_MASK;
-
- if (!((id == AD7792_ID) || (id == AD7793_ID) || (id == AD7795_ID))) {
- dev_err(&st->sd.spi->dev, "device ID query failed\n");
- goto out;
- }
-
- st->mode = pdata->mode;
- st->conf = pdata->conf;
-
- ret = ad7793_set_mode(&st->sd, AD_SD_MODE_IDLE);
- if (ret)
- goto out;
-
- ret = ad7793_set_channel(&st->sd, 0);
- if (ret)
- goto out;
-
- ret = ad_sd_write_reg(&st->sd, AD7793_REG_IO,
- sizeof(pdata->io), pdata->io);
- if (ret)
- goto out;
-
- ret = ad7793_calibrate_all(st);
- if (ret)
- goto out;
-
- /* Populate available ADC input ranges */
- for (i = 0; i < ARRAY_SIZE(st->scale_avail); i++) {
- scale_uv = ((u64)st->int_vref_mv * 100000000)
- >> (st->chip_info->channels[0].scan_type.realbits -
- (!!(st->conf & AD7793_CONF_UNIPOLAR) ? 0 : 1));
- scale_uv >>= i;
-
- st->scale_avail[i][1] = do_div(scale_uv, 100000000) * 10;
- st->scale_avail[i][0] = scale_uv;
- }
-
- return 0;
-out:
- dev_err(&st->sd.spi->dev, "setup failed\n");
- return ret;
-}
-
-static const u16 sample_freq_avail[16] = {0, 470, 242, 123, 62, 50, 39, 33, 19,
- 17, 16, 12, 10, 8, 6, 4};
-
-static ssize_t ad7793_read_frequency(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct iio_dev *indio_dev = dev_to_iio_dev(dev);
- struct ad7793_state *st = iio_priv(indio_dev);
-
- return sprintf(buf, "%d\n",
- sample_freq_avail[AD7793_MODE_RATE(st->mode)]);
-}
-
-static ssize_t ad7793_write_frequency(struct device *dev,
- struct device_attribute *attr,
- const char *buf,
- size_t len)
-{
- struct iio_dev *indio_dev = dev_to_iio_dev(dev);
- struct ad7793_state *st = iio_priv(indio_dev);
- long lval;
- int i, ret;
-
- mutex_lock(&indio_dev->mlock);
- if (iio_buffer_enabled(indio_dev)) {
- mutex_unlock(&indio_dev->mlock);
- return -EBUSY;
- }
- mutex_unlock(&indio_dev->mlock);
-
- ret = strict_strtol(buf, 10, &lval);
- if (ret)
- return ret;
-
- ret = -EINVAL;
-
- for (i = 0; i < ARRAY_SIZE(sample_freq_avail); i++)
- if (lval == sample_freq_avail[i]) {
- mutex_lock(&indio_dev->mlock);
- st->mode &= ~AD7793_MODE_RATE(-1);
- st->mode |= AD7793_MODE_RATE(i);
- ad_sd_write_reg(&st->sd, AD7793_REG_MODE,
- sizeof(st->mode), st->mode);
- mutex_unlock(&indio_dev->mlock);
- ret = 0;
- }
-
- return ret ? ret : len;
-}
-
-static IIO_DEV_ATTR_SAMP_FREQ(S_IWUSR | S_IRUGO,
- ad7793_read_frequency,
- ad7793_write_frequency);
-
-static IIO_CONST_ATTR_SAMP_FREQ_AVAIL(
- "470 242 123 62 50 39 33 19 17 16 12 10 8 6 4");
-
-static ssize_t ad7793_show_scale_available(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct iio_dev *indio_dev = dev_to_iio_dev(dev);
- struct ad7793_state *st = iio_priv(indio_dev);
- int i, len = 0;
-
- for (i = 0; i < ARRAY_SIZE(st->scale_avail); i++)
- len += sprintf(buf + len, "%d.%09u ", st->scale_avail[i][0],
- st->scale_avail[i][1]);
-
- len += sprintf(buf + len, "\n");
-
- return len;
-}
-
-static IIO_DEVICE_ATTR_NAMED(in_m_in_scale_available,
- in_voltage-voltage_scale_available, S_IRUGO,
- ad7793_show_scale_available, NULL, 0);
-
-static struct attribute *ad7793_attributes[] = {
- &iio_dev_attr_sampling_frequency.dev_attr.attr,
- &iio_const_attr_sampling_frequency_available.dev_attr.attr,
- &iio_dev_attr_in_m_in_scale_available.dev_attr.attr,
- NULL
-};
-
-static const struct attribute_group ad7793_attribute_group = {
- .attrs = ad7793_attributes,
-};
-
-static int ad7793_read_raw(struct iio_dev *indio_dev,
- struct iio_chan_spec const *chan,
- int *val,
- int *val2,
- long m)
-{
- struct ad7793_state *st = iio_priv(indio_dev);
- int ret;
- unsigned long long scale_uv;
- bool unipolar = !!(st->conf & AD7793_CONF_UNIPOLAR);
-
- switch (m) {
- case IIO_CHAN_INFO_RAW:
- ret = ad_sigma_delta_single_conversion(indio_dev, chan, val);
- if (ret < 0)
- return ret;
-
- return IIO_VAL_INT;
-
- case IIO_CHAN_INFO_SCALE:
- switch (chan->type) {
- case IIO_VOLTAGE:
- if (chan->differential) {
- *val = st->
- scale_avail[(st->conf >> 8) & 0x7][0];
- *val2 = st->
- scale_avail[(st->conf >> 8) & 0x7][1];
- return IIO_VAL_INT_PLUS_NANO;
- } else {
- /* 1170mV / 2^23 * 6 */
- scale_uv = (1170ULL * 100000000ULL * 6ULL);
- }
- break;
- case IIO_TEMP:
- /* 1170mV / 0.81 mV/C / 2^23 */
- scale_uv = 1444444444444ULL;
- break;
- default:
- return -EINVAL;
- }
-
- scale_uv >>= (chan->scan_type.realbits - (unipolar ? 0 : 1));
- *val = 0;
- *val2 = scale_uv;
- return IIO_VAL_INT_PLUS_NANO;
- case IIO_CHAN_INFO_OFFSET:
- if (!unipolar)
- *val = -(1 << (chan->scan_type.realbits - 1));
- else
- *val = 0;
-
- /* Kelvin to Celsius */
- if (chan->type == IIO_TEMP) {
- unsigned long long offset;
- unsigned int shift;
-
- shift = chan->scan_type.realbits - (unipolar ? 0 : 1);
- offset = 273ULL << shift;
- do_div(offset, 1444);
- *val -= offset;
- }
- return IIO_VAL_INT;
- }
- return -EINVAL;
-}
-
-static int ad7793_write_raw(struct iio_dev *indio_dev,
- struct iio_chan_spec const *chan,
- int val,
- int val2,
- long mask)
-{
- struct ad7793_state *st = iio_priv(indio_dev);
- int ret, i;
- unsigned int tmp;
-
- mutex_lock(&indio_dev->mlock);
- if (iio_buffer_enabled(indio_dev)) {
- mutex_unlock(&indio_dev->mlock);
- return -EBUSY;
- }
-
- switch (mask) {
- case IIO_CHAN_INFO_SCALE:
- ret = -EINVAL;
- for (i = 0; i < ARRAY_SIZE(st->scale_avail); i++)
- if (val2 == st->scale_avail[i][1]) {
- ret = 0;
- tmp = st->conf;
- st->conf &= ~AD7793_CONF_GAIN(-1);
- st->conf |= AD7793_CONF_GAIN(i);
-
- if (tmp == st->conf)
- break;
-
- ad_sd_write_reg(&st->sd, AD7793_REG_CONF,
- sizeof(st->conf), st->conf);
- ad7793_calibrate_all(st);
- break;
- }
- break;
- default:
- ret = -EINVAL;
- }
-
- mutex_unlock(&indio_dev->mlock);
- return ret;
-}
-
-static int ad7793_write_raw_get_fmt(struct iio_dev *indio_dev,
- struct iio_chan_spec const *chan,
- long mask)
-{
- return IIO_VAL_INT_PLUS_NANO;
-}
-
-static const struct iio_info ad7793_info = {
- .read_raw = &ad7793_read_raw,
- .write_raw = &ad7793_write_raw,
- .write_raw_get_fmt = &ad7793_write_raw_get_fmt,
- .attrs = &ad7793_attribute_group,
- .validate_trigger = ad_sd_validate_trigger,
- .driver_module = THIS_MODULE,
-};
-
-#define DECLARE_AD7793_CHANNELS(_name, _b, _sb, _s) \
-const struct iio_chan_spec _name##_channels[] = { \
- AD_SD_DIFF_CHANNEL(0, 0, 0, AD7793_CH_AIN1P_AIN1M, (_b), (_sb), (_s)), \
- AD_SD_DIFF_CHANNEL(1, 1, 1, AD7793_CH_AIN2P_AIN2M, (_b), (_sb), (_s)), \
- AD_SD_DIFF_CHANNEL(2, 2, 2, AD7793_CH_AIN3P_AIN3M, (_b), (_sb), (_s)), \
- AD_SD_SHORTED_CHANNEL(3, 0, AD7793_CH_AIN1M_AIN1M, (_b), (_sb), (_s)), \
- AD_SD_TEMP_CHANNEL(4, AD7793_CH_TEMP, (_b), (_sb), (_s)), \
- AD_SD_SUPPLY_CHANNEL(5, 3, AD7793_CH_AVDD_MONITOR, (_b), (_sb), (_s)), \
- IIO_CHAN_SOFT_TIMESTAMP(6), \
-}
-
-#define DECLARE_AD7795_CHANNELS(_name, _b, _sb) \
-const struct iio_chan_spec _name##_channels[] = { \
- AD_SD_DIFF_CHANNEL(0, 0, 0, AD7793_CH_AIN1P_AIN1M, (_b), (_sb), 0), \
- AD_SD_DIFF_CHANNEL(1, 1, 1, AD7793_CH_AIN2P_AIN2M, (_b), (_sb), 0), \
- AD_SD_DIFF_CHANNEL(2, 2, 2, AD7793_CH_AIN3P_AIN3M, (_b), (_sb), 0), \
- AD_SD_DIFF_CHANNEL(3, 3, 3, AD7795_CH_AIN4P_AIN4M, (_b), (_sb), 0), \
- AD_SD_DIFF_CHANNEL(4, 4, 4, AD7795_CH_AIN5P_AIN5M, (_b), (_sb), 0), \
- AD_SD_DIFF_CHANNEL(5, 5, 5, AD7795_CH_AIN6P_AIN6M, (_b), (_sb), 0), \
- AD_SD_SHORTED_CHANNEL(6, 0, AD7795_CH_AIN1M_AIN1M, (_b), (_sb), 0), \
- AD_SD_TEMP_CHANNEL(7, AD7793_CH_TEMP, (_b), (_sb), 0), \
- AD_SD_SUPPLY_CHANNEL(8, 3, AD7793_CH_AVDD_MONITOR, (_b), (_sb), 0), \
- IIO_CHAN_SOFT_TIMESTAMP(9), \
-}
-
-static DECLARE_AD7793_CHANNELS(ad7785, 20, 32, 4);
-static DECLARE_AD7793_CHANNELS(ad7792, 16, 32, 0);
-static DECLARE_AD7793_CHANNELS(ad7793, 24, 32, 0);
-static DECLARE_AD7795_CHANNELS(ad7794, 16, 32);
-static DECLARE_AD7795_CHANNELS(ad7795, 24, 32);
-
-static const struct ad7793_chip_info ad7793_chip_info_tbl[] = {
- [ID_AD7785] = {
- .channels = ad7785_channels,
- .num_channels = ARRAY_SIZE(ad7785_channels),
- },
- [ID_AD7792] = {
- .channels = ad7792_channels,
- .num_channels = ARRAY_SIZE(ad7792_channels),
- },
- [ID_AD7793] = {
- .channels = ad7793_channels,
- .num_channels = ARRAY_SIZE(ad7793_channels),
- },
- [ID_AD7794] = {
- .channels = ad7794_channels,
- .num_channels = ARRAY_SIZE(ad7794_channels),
- },
- [ID_AD7795] = {
- .channels = ad7795_channels,
- .num_channels = ARRAY_SIZE(ad7795_channels),
- },
-};
-
-static int __devinit ad7793_probe(struct spi_device *spi)
-{
- const struct ad7793_platform_data *pdata = spi->dev.platform_data;
- struct ad7793_state *st;
- struct iio_dev *indio_dev;
- int ret, voltage_uv = 0;
-
- if (!pdata) {
- dev_err(&spi->dev, "no platform data?\n");
- return -ENODEV;
- }
-
- if (!spi->irq) {
- dev_err(&spi->dev, "no IRQ?\n");
- return -ENODEV;
- }
-
- indio_dev = iio_device_alloc(sizeof(*st));
- if (indio_dev == NULL)
- return -ENOMEM;
-
- st = iio_priv(indio_dev);
-
- ad_sd_init(&st->sd, indio_dev, spi, &ad7793_sigma_delta_info);
-
- st->reg = regulator_get(&spi->dev, "vcc");
- if (!IS_ERR(st->reg)) {
- ret = regulator_enable(st->reg);
- if (ret)
- goto error_put_reg;
-
- voltage_uv = regulator_get_voltage(st->reg);
- }
-
- st->chip_info =
- &ad7793_chip_info_tbl[spi_get_device_id(spi)->driver_data];
-
- if (pdata && pdata->vref_mv)
- st->int_vref_mv = pdata->vref_mv;
- else if (voltage_uv)
- st->int_vref_mv = voltage_uv / 1000;
- else
- st->int_vref_mv = 1170; /* Build-in ref */
-
- spi_set_drvdata(spi, indio_dev);
-
- indio_dev->dev.parent = &spi->dev;
- indio_dev->name = spi_get_device_id(spi)->name;
- indio_dev->modes = INDIO_DIRECT_MODE;
- indio_dev->channels = st->chip_info->channels;
- indio_dev->num_channels = st->chip_info->num_channels;
- indio_dev->info = &ad7793_info;
-
- ret = ad_sd_setup_buffer_and_trigger(indio_dev);
- if (ret)
- goto error_disable_reg;
-
- ret = ad7793_setup(indio_dev, pdata);
- if (ret)
- goto error_remove_trigger;
-
- ret = iio_device_register(indio_dev);
- if (ret)
- goto error_remove_trigger;
-
- return 0;
-
-error_remove_trigger:
- ad_sd_cleanup_buffer_and_trigger(indio_dev);
-error_disable_reg:
- if (!IS_ERR(st->reg))
- regulator_disable(st->reg);
-error_put_reg:
- if (!IS_ERR(st->reg))
- regulator_put(st->reg);
-
- iio_device_free(indio_dev);
-
- return ret;
-}
-
-static int __devexit ad7793_remove(struct spi_device *spi)
-{
- struct iio_dev *indio_dev = spi_get_drvdata(spi);
- struct ad7793_state *st = iio_priv(indio_dev);
-
- iio_device_unregister(indio_dev);
- ad_sd_cleanup_buffer_and_trigger(indio_dev);
-
- if (!IS_ERR(st->reg)) {
- regulator_disable(st->reg);
- regulator_put(st->reg);
- }
-
- iio_device_free(indio_dev);
-
- return 0;
-}
-
-static const struct spi_device_id ad7793_id[] = {
- {"ad7785", ID_AD7785},
- {"ad7792", ID_AD7792},
- {"ad7793", ID_AD7793},
- {"ad7794", ID_AD7794},
- {"ad7795", ID_AD7795},
- {}
-};
-MODULE_DEVICE_TABLE(spi, ad7793_id);
-
-static struct spi_driver ad7793_driver = {
- .driver = {
- .name = "ad7793",
- .owner = THIS_MODULE,
- },
- .probe = ad7793_probe,
- .remove = __devexit_p(ad7793_remove),
- .id_table = ad7793_id,
-};
-module_spi_driver(ad7793_driver);
-
-MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
-MODULE_DESCRIPTION("Analog Devices AD7793 and simialr ADCs");
-MODULE_LICENSE("GPL v2");
diff --git a/drivers/staging/iio/adc/ad7793.h b/drivers/staging/iio/adc/ad7793.h
deleted file mode 100644
index 8fdd450a..0000000
--- a/drivers/staging/iio/adc/ad7793.h
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * AD7792/AD7793 SPI ADC driver
- *
- * Copyright 2011 Analog Devices Inc.
- *
- * Licensed under the GPL-2.
- */
-#ifndef IIO_ADC_AD7793_H_
-#define IIO_ADC_AD7793_H_
-
-/*
- * TODO: struct ad7793_platform_data needs to go into include/linux/iio
- */
-
-/* Registers */
-#define AD7793_REG_COMM 0 /* Communications Register (WO, 8-bit) */
-#define AD7793_REG_STAT 0 /* Status Register (RO, 8-bit) */
-#define AD7793_REG_MODE 1 /* Mode Register (RW, 16-bit */
-#define AD7793_REG_CONF 2 /* Configuration Register (RW, 16-bit) */
-#define AD7793_REG_DATA 3 /* Data Register (RO, 16-/24-bit) */
-#define AD7793_REG_ID 4 /* ID Register (RO, 8-bit) */
-#define AD7793_REG_IO 5 /* IO Register (RO, 8-bit) */
-#define AD7793_REG_OFFSET 6 /* Offset Register (RW, 16-bit
- * (AD7792)/24-bit (AD7793)) */
-#define AD7793_REG_FULLSALE 7 /* Full-Scale Register
- * (RW, 16-bit (AD7792)/24-bit (AD7793)) */
-
-/* Communications Register Bit Designations (AD7793_REG_COMM) */
-#define AD7793_COMM_WEN (1 << 7) /* Write Enable */
-#define AD7793_COMM_WRITE (0 << 6) /* Write Operation */
-#define AD7793_COMM_READ (1 << 6) /* Read Operation */
-#define AD7793_COMM_ADDR(x) (((x) & 0x7) << 3) /* Register Address */
-#define AD7793_COMM_CREAD (1 << 2) /* Continuous Read of Data Register */
-
-/* Status Register Bit Designations (AD7793_REG_STAT) */
-#define AD7793_STAT_RDY (1 << 7) /* Ready */
-#define AD7793_STAT_ERR (1 << 6) /* Error (Overrange, Underrange) */
-#define AD7793_STAT_CH3 (1 << 2) /* Channel 3 */
-#define AD7793_STAT_CH2 (1 << 1) /* Channel 2 */
-#define AD7793_STAT_CH1 (1 << 0) /* Channel 1 */
-
-/* Mode Register Bit Designations (AD7793_REG_MODE) */
-#define AD7793_MODE_SEL(x) (((x) & 0x7) << 13) /* Operation Mode Select */
-#define AD7793_MODE_SEL_MASK (0x7 << 13) /* Operation Mode Select mask */
-#define AD7793_MODE_CLKSRC(x) (((x) & 0x3) << 6) /* ADC Clock Source Select */
-#define AD7793_MODE_RATE(x) ((x) & 0xF) /* Filter Update Rate Select */
-
-#define AD7793_MODE_CONT 0 /* Continuous Conversion Mode */
-#define AD7793_MODE_SINGLE 1 /* Single Conversion Mode */
-#define AD7793_MODE_IDLE 2 /* Idle Mode */
-#define AD7793_MODE_PWRDN 3 /* Power-Down Mode */
-#define AD7793_MODE_CAL_INT_ZERO 4 /* Internal Zero-Scale Calibration */
-#define AD7793_MODE_CAL_INT_FULL 5 /* Internal Full-Scale Calibration */
-#define AD7793_MODE_CAL_SYS_ZERO 6 /* System Zero-Scale Calibration */
-#define AD7793_MODE_CAL_SYS_FULL 7 /* System Full-Scale Calibration */
-
-#define AD7793_CLK_INT 0 /* Internal 64 kHz Clock not
- * available at the CLK pin */
-#define AD7793_CLK_INT_CO 1 /* Internal 64 kHz Clock available
- * at the CLK pin */
-#define AD7793_CLK_EXT 2 /* External 64 kHz Clock */
-#define AD7793_CLK_EXT_DIV2 3 /* External Clock divided by 2 */
-
-/* Configuration Register Bit Designations (AD7793_REG_CONF) */
-#define AD7793_CONF_VBIAS(x) (((x) & 0x3) << 14) /* Bias Voltage
- * Generator Enable */
-#define AD7793_CONF_BO_EN (1 << 13) /* Burnout Current Enable */
-#define AD7793_CONF_UNIPOLAR (1 << 12) /* Unipolar/Bipolar Enable */
-#define AD7793_CONF_BOOST (1 << 11) /* Boost Enable */
-#define AD7793_CONF_GAIN(x) (((x) & 0x7) << 8) /* Gain Select */
-#define AD7793_CONF_REFSEL (1 << 7) /* INT/EXT Reference Select */
-#define AD7793_CONF_BUF (1 << 4) /* Buffered Mode Enable */
-#define AD7793_CONF_CHAN(x) ((x) & 0xf) /* Channel select */
-#define AD7793_CONF_CHAN_MASK 0xf /* Channel select mask */
-
-#define AD7793_CH_AIN1P_AIN1M 0 /* AIN1(+) - AIN1(-) */
-#define AD7793_CH_AIN2P_AIN2M 1 /* AIN2(+) - AIN2(-) */
-#define AD7793_CH_AIN3P_AIN3M 2 /* AIN3(+) - AIN3(-) */
-#define AD7793_CH_AIN1M_AIN1M 3 /* AIN1(-) - AIN1(-) */
-#define AD7793_CH_TEMP 6 /* Temp Sensor */
-#define AD7793_CH_AVDD_MONITOR 7 /* AVDD Monitor */
-
-#define AD7795_CH_AIN4P_AIN4M 4 /* AIN4(+) - AIN4(-) */
-#define AD7795_CH_AIN5P_AIN5M 5 /* AIN5(+) - AIN5(-) */
-#define AD7795_CH_AIN6P_AIN6M 6 /* AIN6(+) - AIN6(-) */
-#define AD7795_CH_AIN1M_AIN1M 8 /* AIN1(-) - AIN1(-) */
-
-/* ID Register Bit Designations (AD7793_REG_ID) */
-#define AD7792_ID 0xA
-#define AD7793_ID 0xB
-#define AD7795_ID 0xF
-#define AD7793_ID_MASK 0xF
-
-/* IO (Excitation Current Sources) Register Bit Designations (AD7793_REG_IO) */
-#define AD7793_IO_IEXC1_IOUT1_IEXC2_IOUT2 0 /* IEXC1 connect to IOUT1,
- * IEXC2 connect to IOUT2 */
-#define AD7793_IO_IEXC1_IOUT2_IEXC2_IOUT1 1 /* IEXC1 connect to IOUT2,
- * IEXC2 connect to IOUT1 */
-#define AD7793_IO_IEXC1_IEXC2_IOUT1 2 /* Both current sources
- * IEXC1,2 connect to IOUT1 */
-#define AD7793_IO_IEXC1_IEXC2_IOUT2 3 /* Both current sources
- * IEXC1,2 connect to IOUT2 */
-
-#define AD7793_IO_IXCEN_10uA (1 << 0) /* Excitation Current 10uA */
-#define AD7793_IO_IXCEN_210uA (2 << 0) /* Excitation Current 210uA */
-#define AD7793_IO_IXCEN_1mA (3 << 0) /* Excitation Current 1mA */
-
-struct ad7793_platform_data {
- u16 vref_mv;
- u16 mode;
- u16 conf;
- u8 io;
-};
-
-#endif /* IIO_ADC_AD7793_H_ */
diff --git a/drivers/staging/iio/adc/ad7816.c b/drivers/staging/iio/adc/ad7816.c
index c5fb947..9284771 100644
--- a/drivers/staging/iio/adc/ad7816.c
+++ b/drivers/staging/iio/adc/ad7816.c
@@ -341,7 +341,7 @@
* device probe and remove
*/
-static int __devinit ad7816_probe(struct spi_device *spi_dev)
+static int ad7816_probe(struct spi_device *spi_dev)
{
struct ad7816_chip_info *chip;
struct iio_dev *indio_dev;
@@ -431,7 +431,7 @@
return ret;
}
-static int __devexit ad7816_remove(struct spi_device *spi_dev)
+static int ad7816_remove(struct spi_device *spi_dev)
{
struct iio_dev *indio_dev = dev_get_drvdata(&spi_dev->dev);
struct ad7816_chip_info *chip = iio_priv(indio_dev);
@@ -463,7 +463,7 @@
.owner = THIS_MODULE,
},
.probe = ad7816_probe,
- .remove = __devexit_p(ad7816_remove),
+ .remove = ad7816_remove,
.id_table = ad7816_id,
};
module_spi_driver(ad7816_driver);
diff --git a/drivers/staging/iio/adc/ad7887.h b/drivers/staging/iio/adc/ad7887.h
deleted file mode 100644
index 2e09e54..0000000
--- a/drivers/staging/iio/adc/ad7887.h
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * AD7887 SPI ADC driver
- *
- * Copyright 2010 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-#ifndef IIO_ADC_AD7887_H_
-#define IIO_ADC_AD7887_H_
-
-#define AD7887_REF_DIS (1 << 5) /* on-chip reference disable */
-#define AD7887_DUAL (1 << 4) /* dual-channel mode */
-#define AD7887_CH_AIN1 (1 << 3) /* convert on channel 1, DUAL=1 */
-#define AD7887_CH_AIN0 (0 << 3) /* convert on channel 0, DUAL=0,1 */
-#define AD7887_PM_MODE1 (0) /* CS based shutdown */
-#define AD7887_PM_MODE2 (1) /* full on */
-#define AD7887_PM_MODE3 (2) /* auto shutdown after conversion */
-#define AD7887_PM_MODE4 (3) /* standby mode */
-
-enum ad7887_channels {
- AD7887_CH0,
- AD7887_CH0_CH1,
- AD7887_CH1,
-};
-
-#define RES_MASK(bits) ((1 << (bits)) - 1) /* TODO: move this into a common header */
-
-/*
- * TODO: struct ad7887_platform_data needs to go into include/linux/iio
- */
-
-struct ad7887_platform_data {
- /* External Vref voltage applied */
- u16 vref_mv;
- /*
- * AD7887:
- * In single channel mode en_dual = flase, AIN1/Vref pins assumes its
- * Vref function. In dual channel mode en_dual = true, AIN1 becomes the
- * second input channel, and Vref is internally connected to Vdd.
- */
- bool en_dual;
- /*
- * AD7887:
- * use_onchip_ref = true, the Vref is internally connected to the 2.500V
- * Voltage reference. If use_onchip_ref = false, the reference voltage
- * is supplied by AIN1/Vref
- */
- bool use_onchip_ref;
-};
-
-/**
- * struct ad7887_chip_info - chip specifc information
- * @int_vref_mv: the internal reference voltage
- * @channel: channel specification
- */
-
-struct ad7887_chip_info {
- u16 int_vref_mv;
- struct iio_chan_spec channel[3];
-};
-
-struct ad7887_state {
- struct spi_device *spi;
- const struct ad7887_chip_info *chip_info;
- struct regulator *reg;
- u16 int_vref_mv;
- struct spi_transfer xfer[4];
- struct spi_message msg[3];
- struct spi_message *ring_msg;
- unsigned char tx_cmd_buf[8];
-
- /*
- * DMA (thus cache coherency maintenance) requires the
- * transfer buffers to live in their own cache lines.
- */
-
- unsigned char data[4] ____cacheline_aligned;
-};
-
-enum ad7887_supported_device_ids {
- ID_AD7887
-};
-
-#ifdef CONFIG_IIO_BUFFER
-int ad7887_register_ring_funcs_and_init(struct iio_dev *indio_dev);
-void ad7887_ring_cleanup(struct iio_dev *indio_dev);
-#else /* CONFIG_IIO_BUFFER */
-
-static inline int
-ad7887_register_ring_funcs_and_init(struct iio_dev *indio_dev)
-{
- return 0;
-}
-
-static inline void ad7887_ring_cleanup(struct iio_dev *indio_dev)
-{
-}
-#endif /* CONFIG_IIO_BUFFER */
-#endif /* IIO_ADC_AD7887_H_ */
diff --git a/drivers/staging/iio/adc/ad7887_core.c b/drivers/staging/iio/adc/ad7887_core.c
deleted file mode 100644
index 5517905..0000000
--- a/drivers/staging/iio/adc/ad7887_core.c
+++ /dev/null
@@ -1,257 +0,0 @@
-/*
- * AD7887 SPI ADC driver
- *
- * Copyright 2010-2011 Analog Devices Inc.
- *
- * Licensed under the GPL-2.
- */
-
-#include <linux/device.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/sysfs.h>
-#include <linux/spi/spi.h>
-#include <linux/regulator/consumer.h>
-#include <linux/err.h>
-#include <linux/module.h>
-
-#include <linux/iio/iio.h>
-#include <linux/iio/sysfs.h>
-#include <linux/iio/buffer.h>
-
-
-#include "ad7887.h"
-
-static int ad7887_scan_direct(struct ad7887_state *st, unsigned ch)
-{
- int ret = spi_sync(st->spi, &st->msg[ch]);
- if (ret)
- return ret;
-
- return (st->data[(ch * 2)] << 8) | st->data[(ch * 2) + 1];
-}
-
-static int ad7887_read_raw(struct iio_dev *indio_dev,
- struct iio_chan_spec const *chan,
- int *val,
- int *val2,
- long m)
-{
- int ret;
- struct ad7887_state *st = iio_priv(indio_dev);
- unsigned int scale_uv;
-
- switch (m) {
- case IIO_CHAN_INFO_RAW:
- mutex_lock(&indio_dev->mlock);
- if (iio_buffer_enabled(indio_dev))
- ret = -EBUSY;
- else
- ret = ad7887_scan_direct(st, chan->address);
- mutex_unlock(&indio_dev->mlock);
-
- if (ret < 0)
- return ret;
- *val = (ret >> st->chip_info->channel[0].scan_type.shift) &
- RES_MASK(st->chip_info->channel[0].scan_type.realbits);
- return IIO_VAL_INT;
- case IIO_CHAN_INFO_SCALE:
- scale_uv = (st->int_vref_mv * 1000)
- >> st->chip_info->channel[0].scan_type.realbits;
- *val = scale_uv/1000;
- *val2 = (scale_uv%1000)*1000;
- return IIO_VAL_INT_PLUS_MICRO;
- }
- return -EINVAL;
-}
-
-
-static const struct ad7887_chip_info ad7887_chip_info_tbl[] = {
- /*
- * More devices added in future
- */
- [ID_AD7887] = {
- .channel[0] = {
- .type = IIO_VOLTAGE,
- .indexed = 1,
- .channel = 1,
- .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
- IIO_CHAN_INFO_SCALE_SHARED_BIT,
- .address = 1,
- .scan_index = 1,
- .scan_type = IIO_ST('u', 12, 16, 0),
- },
- .channel[1] = {
- .type = IIO_VOLTAGE,
- .indexed = 1,
- .channel = 0,
- .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
- IIO_CHAN_INFO_SCALE_SHARED_BIT,
- .address = 0,
- .scan_index = 0,
- .scan_type = IIO_ST('u', 12, 16, 0),
- },
- .channel[2] = IIO_CHAN_SOFT_TIMESTAMP(2),
- .int_vref_mv = 2500,
- },
-};
-
-static const struct iio_info ad7887_info = {
- .read_raw = &ad7887_read_raw,
- .driver_module = THIS_MODULE,
-};
-
-static int __devinit ad7887_probe(struct spi_device *spi)
-{
- struct ad7887_platform_data *pdata = spi->dev.platform_data;
- struct ad7887_state *st;
- int ret, voltage_uv = 0;
- struct iio_dev *indio_dev = iio_device_alloc(sizeof(*st));
-
- if (indio_dev == NULL)
- return -ENOMEM;
-
- st = iio_priv(indio_dev);
-
- st->reg = regulator_get(&spi->dev, "vcc");
- if (!IS_ERR(st->reg)) {
- ret = regulator_enable(st->reg);
- if (ret)
- goto error_put_reg;
-
- voltage_uv = regulator_get_voltage(st->reg);
- }
-
- st->chip_info =
- &ad7887_chip_info_tbl[spi_get_device_id(spi)->driver_data];
-
- spi_set_drvdata(spi, indio_dev);
- st->spi = spi;
-
- /* Estabilish that the iio_dev is a child of the spi device */
- indio_dev->dev.parent = &spi->dev;
- indio_dev->name = spi_get_device_id(spi)->name;
- indio_dev->info = &ad7887_info;
- indio_dev->modes = INDIO_DIRECT_MODE;
-
- /* Setup default message */
-
- st->tx_cmd_buf[0] = AD7887_CH_AIN0 | AD7887_PM_MODE4 |
- ((pdata && pdata->use_onchip_ref) ?
- 0 : AD7887_REF_DIS);
-
- st->xfer[0].rx_buf = &st->data[0];
- st->xfer[0].tx_buf = &st->tx_cmd_buf[0];
- st->xfer[0].len = 2;
-
- spi_message_init(&st->msg[AD7887_CH0]);
- spi_message_add_tail(&st->xfer[0], &st->msg[AD7887_CH0]);
-
- if (pdata && pdata->en_dual) {
- st->tx_cmd_buf[0] |= AD7887_DUAL | AD7887_REF_DIS;
-
- st->tx_cmd_buf[2] = AD7887_CH_AIN1 | AD7887_DUAL |
- AD7887_REF_DIS | AD7887_PM_MODE4;
- st->tx_cmd_buf[4] = AD7887_CH_AIN0 | AD7887_DUAL |
- AD7887_REF_DIS | AD7887_PM_MODE4;
- st->tx_cmd_buf[6] = AD7887_CH_AIN1 | AD7887_DUAL |
- AD7887_REF_DIS | AD7887_PM_MODE4;
-
- st->xfer[1].rx_buf = &st->data[0];
- st->xfer[1].tx_buf = &st->tx_cmd_buf[2];
- st->xfer[1].len = 2;
-
- st->xfer[2].rx_buf = &st->data[2];
- st->xfer[2].tx_buf = &st->tx_cmd_buf[4];
- st->xfer[2].len = 2;
-
- spi_message_init(&st->msg[AD7887_CH0_CH1]);
- spi_message_add_tail(&st->xfer[1], &st->msg[AD7887_CH0_CH1]);
- spi_message_add_tail(&st->xfer[2], &st->msg[AD7887_CH0_CH1]);
-
- st->xfer[3].rx_buf = &st->data[0];
- st->xfer[3].tx_buf = &st->tx_cmd_buf[6];
- st->xfer[3].len = 2;
-
- spi_message_init(&st->msg[AD7887_CH1]);
- spi_message_add_tail(&st->xfer[3], &st->msg[AD7887_CH1]);
-
- if (pdata && pdata->vref_mv)
- st->int_vref_mv = pdata->vref_mv;
- else if (voltage_uv)
- st->int_vref_mv = voltage_uv / 1000;
- else
- dev_warn(&spi->dev, "reference voltage unspecified\n");
-
- indio_dev->channels = st->chip_info->channel;
- indio_dev->num_channels = 3;
- } else {
- if (pdata && pdata->vref_mv)
- st->int_vref_mv = pdata->vref_mv;
- else if (pdata && pdata->use_onchip_ref)
- st->int_vref_mv = st->chip_info->int_vref_mv;
- else
- dev_warn(&spi->dev, "reference voltage unspecified\n");
-
- indio_dev->channels = &st->chip_info->channel[1];
- indio_dev->num_channels = 2;
- }
-
- ret = ad7887_register_ring_funcs_and_init(indio_dev);
- if (ret)
- goto error_disable_reg;
-
- ret = iio_device_register(indio_dev);
- if (ret)
- goto error_unregister_ring;
-
- return 0;
-error_unregister_ring:
- ad7887_ring_cleanup(indio_dev);
-error_disable_reg:
- if (!IS_ERR(st->reg))
- regulator_disable(st->reg);
-error_put_reg:
- if (!IS_ERR(st->reg))
- regulator_put(st->reg);
- iio_device_free(indio_dev);
-
- return ret;
-}
-
-static int __devexit ad7887_remove(struct spi_device *spi)
-{
- struct iio_dev *indio_dev = spi_get_drvdata(spi);
- struct ad7887_state *st = iio_priv(indio_dev);
-
- iio_device_unregister(indio_dev);
- ad7887_ring_cleanup(indio_dev);
- if (!IS_ERR(st->reg)) {
- regulator_disable(st->reg);
- regulator_put(st->reg);
- }
- iio_device_free(indio_dev);
-
- return 0;
-}
-
-static const struct spi_device_id ad7887_id[] = {
- {"ad7887", ID_AD7887},
- {}
-};
-MODULE_DEVICE_TABLE(spi, ad7887_id);
-
-static struct spi_driver ad7887_driver = {
- .driver = {
- .name = "ad7887",
- .owner = THIS_MODULE,
- },
- .probe = ad7887_probe,
- .remove = __devexit_p(ad7887_remove),
- .id_table = ad7887_id,
-};
-module_spi_driver(ad7887_driver);
-
-MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
-MODULE_DESCRIPTION("Analog Devices AD7887 ADC");
-MODULE_LICENSE("GPL v2");
diff --git a/drivers/staging/iio/adc/ad7887_ring.c b/drivers/staging/iio/adc/ad7887_ring.c
deleted file mode 100644
index b39923b..0000000
--- a/drivers/staging/iio/adc/ad7887_ring.c
+++ /dev/null
@@ -1,122 +0,0 @@
-/*
- * Copyright 2010-2012 Analog Devices Inc.
- * Copyright (C) 2008 Jonathan Cameron
- *
- * Licensed under the GPL-2.
- *
- * ad7887_ring.c
- */
-
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/spi/spi.h>
-
-#include <linux/iio/iio.h>
-#include <linux/iio/buffer.h>
-#include <linux/iio/trigger_consumer.h>
-#include <linux/iio/triggered_buffer.h>
-
-#include "ad7887.h"
-
-/**
- * ad7887_ring_preenable() setup the parameters of the ring before enabling
- *
- * The complex nature of the setting of the nuber of bytes per datum is due
- * to this driver currently ensuring that the timestamp is stored at an 8
- * byte boundary.
- **/
-static int ad7887_ring_preenable(struct iio_dev *indio_dev)
-{
- struct ad7887_state *st = iio_priv(indio_dev);
- int ret;
-
- ret = iio_sw_buffer_preenable(indio_dev);
- if (ret < 0)
- return ret;
-
- /* We know this is a single long so can 'cheat' */
- switch (*indio_dev->active_scan_mask) {
- case (1 << 0):
- st->ring_msg = &st->msg[AD7887_CH0];
- break;
- case (1 << 1):
- st->ring_msg = &st->msg[AD7887_CH1];
- /* Dummy read: push CH1 setting down to hardware */
- spi_sync(st->spi, st->ring_msg);
- break;
- case ((1 << 1) | (1 << 0)):
- st->ring_msg = &st->msg[AD7887_CH0_CH1];
- break;
- }
-
- return 0;
-}
-
-static int ad7887_ring_postdisable(struct iio_dev *indio_dev)
-{
- struct ad7887_state *st = iio_priv(indio_dev);
-
- /* dummy read: restore default CH0 settin */
- return spi_sync(st->spi, &st->msg[AD7887_CH0]);
-}
-
-/**
- * ad7887_trigger_handler() bh of trigger launched polling to ring buffer
- *
- * Currently there is no option in this driver to disable the saving of
- * timestamps within the ring.
- **/
-static irqreturn_t ad7887_trigger_handler(int irq, void *p)
-{
- struct iio_poll_func *pf = p;
- struct iio_dev *indio_dev = pf->indio_dev;
- struct ad7887_state *st = iio_priv(indio_dev);
- s64 time_ns;
- __u8 *buf;
- int b_sent;
-
- unsigned int bytes = bitmap_weight(indio_dev->active_scan_mask,
- indio_dev->masklength) *
- st->chip_info->channel[0].scan_type.storagebits / 8;
-
- buf = kzalloc(indio_dev->scan_bytes, GFP_KERNEL);
- if (buf == NULL)
- goto done;
-
- b_sent = spi_sync(st->spi, st->ring_msg);
- if (b_sent)
- goto done;
-
- time_ns = iio_get_time_ns();
-
- memcpy(buf, st->data, bytes);
- if (indio_dev->scan_timestamp)
- memcpy(buf + indio_dev->scan_bytes - sizeof(s64),
- &time_ns, sizeof(time_ns));
-
- iio_push_to_buffer(indio_dev->buffer, buf);
-done:
- kfree(buf);
- iio_trigger_notify_done(indio_dev->trig);
-
- return IRQ_HANDLED;
-}
-
-static const struct iio_buffer_setup_ops ad7887_ring_setup_ops = {
- .preenable = &ad7887_ring_preenable,
- .postenable = &iio_triggered_buffer_postenable,
- .predisable = &iio_triggered_buffer_predisable,
- .postdisable = &ad7887_ring_postdisable,
-};
-
-int ad7887_register_ring_funcs_and_init(struct iio_dev *indio_dev)
-{
- return iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time,
- &ad7887_trigger_handler, &ad7887_ring_setup_ops);
-}
-
-void ad7887_ring_cleanup(struct iio_dev *indio_dev)
-{
- iio_triggered_buffer_cleanup(indio_dev);
-}
diff --git a/drivers/staging/iio/adc/ad799x_core.c b/drivers/staging/iio/adc/ad799x_core.c
index 9900507..077eedb 100644
--- a/drivers/staging/iio/adc/ad799x_core.c
+++ b/drivers/staging/iio/adc/ad799x_core.c
@@ -854,7 +854,7 @@
},
};
-static int __devinit ad799x_probe(struct i2c_client *client,
+static int ad799x_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
int ret;
@@ -932,7 +932,7 @@
return ret;
}
-static __devexit int ad799x_remove(struct i2c_client *client)
+static int ad799x_remove(struct i2c_client *client)
{
struct iio_dev *indio_dev = i2c_get_clientdata(client);
struct ad799x_state *st = iio_priv(indio_dev);
@@ -970,7 +970,7 @@
.name = "ad799x",
},
.probe = ad799x_probe,
- .remove = __devexit_p(ad799x_remove),
+ .remove = ad799x_remove,
.id_table = ad799x_id,
};
module_i2c_driver(ad799x_driver);
diff --git a/drivers/staging/iio/adc/ad799x_ring.c b/drivers/staging/iio/adc/ad799x_ring.c
index 86026d9..2c5f384 100644
--- a/drivers/staging/iio/adc/ad799x_ring.c
+++ b/drivers/staging/iio/adc/ad799x_ring.c
@@ -77,7 +77,7 @@
memcpy(rxbuf + indio_dev->scan_bytes - sizeof(s64),
&time_ns, sizeof(time_ns));
- iio_push_to_buffer(indio_dev->buffer, rxbuf);
+ iio_push_to_buffers(indio_dev, rxbuf);
done:
kfree(rxbuf);
out:
diff --git a/drivers/staging/iio/adc/adt7310.c b/drivers/staging/iio/adc/adt7310.c
deleted file mode 100644
index 72460b6..0000000
--- a/drivers/staging/iio/adc/adt7310.c
+++ /dev/null
@@ -1,881 +0,0 @@
-/*
- * ADT7310 digital temperature sensor driver supporting ADT7310
- *
- * Copyright 2010 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#include <linux/interrupt.h>
-#include <linux/device.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/sysfs.h>
-#include <linux/list.h>
-#include <linux/spi/spi.h>
-#include <linux/module.h>
-
-#include <linux/iio/iio.h>
-#include <linux/iio/sysfs.h>
-#include <linux/iio/events.h>
-/*
- * ADT7310 registers definition
- */
-
-#define ADT7310_STATUS 0
-#define ADT7310_CONFIG 1
-#define ADT7310_TEMPERATURE 2
-#define ADT7310_ID 3
-#define ADT7310_T_CRIT 4
-#define ADT7310_T_HYST 5
-#define ADT7310_T_ALARM_HIGH 6
-#define ADT7310_T_ALARM_LOW 7
-
-/*
- * ADT7310 status
- */
-#define ADT7310_STAT_T_LOW 0x10
-#define ADT7310_STAT_T_HIGH 0x20
-#define ADT7310_STAT_T_CRIT 0x40
-#define ADT7310_STAT_NOT_RDY 0x80
-
-/*
- * ADT7310 config
- */
-#define ADT7310_FAULT_QUEUE_MASK 0x3
-#define ADT7310_CT_POLARITY 0x4
-#define ADT7310_INT_POLARITY 0x8
-#define ADT7310_EVENT_MODE 0x10
-#define ADT7310_MODE_MASK 0x60
-#define ADT7310_ONESHOT 0x20
-#define ADT7310_SPS 0x40
-#define ADT7310_PD 0x60
-#define ADT7310_RESOLUTION 0x80
-
-/*
- * ADT7310 masks
- */
-#define ADT7310_T16_VALUE_SIGN 0x8000
-#define ADT7310_T16_VALUE_FLOAT_OFFSET 7
-#define ADT7310_T16_VALUE_FLOAT_MASK 0x7F
-#define ADT7310_T13_VALUE_SIGN 0x1000
-#define ADT7310_T13_VALUE_OFFSET 3
-#define ADT7310_T13_VALUE_FLOAT_OFFSET 4
-#define ADT7310_T13_VALUE_FLOAT_MASK 0xF
-#define ADT7310_T_HYST_MASK 0xF
-#define ADT7310_DEVICE_ID_MASK 0x7
-#define ADT7310_MANUFACTORY_ID_MASK 0xF8
-#define ADT7310_MANUFACTORY_ID_OFFSET 3
-
-
-#define ADT7310_CMD_REG_MASK 0x28
-#define ADT7310_CMD_REG_OFFSET 3
-#define ADT7310_CMD_READ 0x40
-#define ADT7310_CMD_CON_READ 0x4
-
-#define ADT7310_IRQS 2
-
-/*
- * struct adt7310_chip_info - chip specifc information
- */
-
-struct adt7310_chip_info {
- struct spi_device *spi_dev;
- u8 config;
-};
-
-/*
- * adt7310 register access by SPI
- */
-
-static int adt7310_spi_read_word(struct adt7310_chip_info *chip, u8 reg, u16 *data)
-{
- struct spi_device *spi_dev = chip->spi_dev;
- u8 command = (reg << ADT7310_CMD_REG_OFFSET) & ADT7310_CMD_REG_MASK;
- int ret = 0;
-
- command |= ADT7310_CMD_READ;
- ret = spi_write(spi_dev, &command, sizeof(command));
- if (ret < 0) {
- dev_err(&spi_dev->dev, "SPI write command error\n");
- return ret;
- }
-
- ret = spi_read(spi_dev, (u8 *)data, sizeof(*data));
- if (ret < 0) {
- dev_err(&spi_dev->dev, "SPI read word error\n");
- return ret;
- }
-
- *data = be16_to_cpu(*data);
-
- return 0;
-}
-
-static int adt7310_spi_write_word(struct adt7310_chip_info *chip, u8 reg, u16 data)
-{
- struct spi_device *spi_dev = chip->spi_dev;
- u8 buf[3];
- int ret = 0;
-
- buf[0] = (reg << ADT7310_CMD_REG_OFFSET) & ADT7310_CMD_REG_MASK;
- buf[1] = (u8)(data >> 8);
- buf[2] = (u8)(data & 0xFF);
-
- ret = spi_write(spi_dev, buf, 3);
- if (ret < 0) {
- dev_err(&spi_dev->dev, "SPI write word error\n");
- return ret;
- }
-
- return ret;
-}
-
-static int adt7310_spi_read_byte(struct adt7310_chip_info *chip, u8 reg, u8 *data)
-{
- struct spi_device *spi_dev = chip->spi_dev;
- u8 command = (reg << ADT7310_CMD_REG_OFFSET) & ADT7310_CMD_REG_MASK;
- int ret = 0;
-
- command |= ADT7310_CMD_READ;
- ret = spi_write(spi_dev, &command, sizeof(command));
- if (ret < 0) {
- dev_err(&spi_dev->dev, "SPI write command error\n");
- return ret;
- }
-
- ret = spi_read(spi_dev, data, sizeof(*data));
- if (ret < 0) {
- dev_err(&spi_dev->dev, "SPI read byte error\n");
- return ret;
- }
-
- return 0;
-}
-
-static int adt7310_spi_write_byte(struct adt7310_chip_info *chip, u8 reg, u8 data)
-{
- struct spi_device *spi_dev = chip->spi_dev;
- u8 buf[2];
- int ret = 0;
-
- buf[0] = (reg << ADT7310_CMD_REG_OFFSET) & ADT7310_CMD_REG_MASK;
- buf[1] = data;
-
- ret = spi_write(spi_dev, buf, 2);
- if (ret < 0) {
- dev_err(&spi_dev->dev, "SPI write byte error\n");
- return ret;
- }
-
- return ret;
-}
-
-static ssize_t adt7310_show_mode(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct iio_dev *dev_info = dev_to_iio_dev(dev);
- struct adt7310_chip_info *chip = iio_priv(dev_info);
- u8 config;
-
- config = chip->config & ADT7310_MODE_MASK;
-
- switch (config) {
- case ADT7310_PD:
- return sprintf(buf, "power-down\n");
- case ADT7310_ONESHOT:
- return sprintf(buf, "one-shot\n");
- case ADT7310_SPS:
- return sprintf(buf, "sps\n");
- default:
- return sprintf(buf, "full\n");
- }
-}
-
-static ssize_t adt7310_store_mode(struct device *dev,
- struct device_attribute *attr,
- const char *buf,
- size_t len)
-{
- struct iio_dev *dev_info = dev_to_iio_dev(dev);
- struct adt7310_chip_info *chip = iio_priv(dev_info);
- u16 config;
- int ret;
-
- ret = adt7310_spi_read_byte(chip, ADT7310_CONFIG, &chip->config);
- if (ret)
- return -EIO;
-
- config = chip->config & (~ADT7310_MODE_MASK);
- if (strcmp(buf, "power-down"))
- config |= ADT7310_PD;
- else if (strcmp(buf, "one-shot"))
- config |= ADT7310_ONESHOT;
- else if (strcmp(buf, "sps"))
- config |= ADT7310_SPS;
-
- ret = adt7310_spi_write_byte(chip, ADT7310_CONFIG, config);
- if (ret)
- return -EIO;
-
- chip->config = config;
-
- return len;
-}
-
-static IIO_DEVICE_ATTR(mode, S_IRUGO | S_IWUSR,
- adt7310_show_mode,
- adt7310_store_mode,
- 0);
-
-static ssize_t adt7310_show_available_modes(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- return sprintf(buf, "full\none-shot\nsps\npower-down\n");
-}
-
-static IIO_DEVICE_ATTR(available_modes, S_IRUGO, adt7310_show_available_modes, NULL, 0);
-
-static ssize_t adt7310_show_resolution(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct iio_dev *dev_info = dev_to_iio_dev(dev);
- struct adt7310_chip_info *chip = iio_priv(dev_info);
- int ret;
- int bits;
-
- ret = adt7310_spi_read_byte(chip, ADT7310_CONFIG, &chip->config);
- if (ret)
- return -EIO;
-
- if (chip->config & ADT7310_RESOLUTION)
- bits = 16;
- else
- bits = 13;
-
- return sprintf(buf, "%d bits\n", bits);
-}
-
-static ssize_t adt7310_store_resolution(struct device *dev,
- struct device_attribute *attr,
- const char *buf,
- size_t len)
-{
- struct iio_dev *dev_info = dev_to_iio_dev(dev);
- struct adt7310_chip_info *chip = iio_priv(dev_info);
- unsigned long data;
- u16 config;
- int ret;
-
- ret = strict_strtoul(buf, 10, &data);
- if (ret)
- return -EINVAL;
-
- ret = adt7310_spi_read_byte(chip, ADT7310_CONFIG, &chip->config);
- if (ret)
- return -EIO;
-
- config = chip->config & (~ADT7310_RESOLUTION);
- if (data)
- config |= ADT7310_RESOLUTION;
-
- ret = adt7310_spi_write_byte(chip, ADT7310_CONFIG, config);
- if (ret)
- return -EIO;
-
- chip->config = config;
-
- return len;
-}
-
-static IIO_DEVICE_ATTR(resolution, S_IRUGO | S_IWUSR,
- adt7310_show_resolution,
- adt7310_store_resolution,
- 0);
-
-static ssize_t adt7310_show_id(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct iio_dev *dev_info = dev_to_iio_dev(dev);
- struct adt7310_chip_info *chip = iio_priv(dev_info);
- u8 id;
- int ret;
-
- ret = adt7310_spi_read_byte(chip, ADT7310_ID, &id);
- if (ret)
- return -EIO;
-
- return sprintf(buf, "device id: 0x%x\nmanufactory id: 0x%x\n",
- id & ADT7310_DEVICE_ID_MASK,
- (id & ADT7310_MANUFACTORY_ID_MASK) >> ADT7310_MANUFACTORY_ID_OFFSET);
-}
-
-static IIO_DEVICE_ATTR(id, S_IRUGO | S_IWUSR,
- adt7310_show_id,
- NULL,
- 0);
-
-static ssize_t adt7310_convert_temperature(struct adt7310_chip_info *chip,
- u16 data, char *buf)
-{
- char sign = ' ';
-
- if (chip->config & ADT7310_RESOLUTION) {
- if (data & ADT7310_T16_VALUE_SIGN) {
- /* convert supplement to positive value */
- data = (u16)((ADT7310_T16_VALUE_SIGN << 1) - (u32)data);
- sign = '-';
- }
- return sprintf(buf, "%c%d.%.7d\n", sign,
- (data >> ADT7310_T16_VALUE_FLOAT_OFFSET),
- (data & ADT7310_T16_VALUE_FLOAT_MASK) * 78125);
- } else {
- if (data & ADT7310_T13_VALUE_SIGN) {
- /* convert supplement to positive value */
- data >>= ADT7310_T13_VALUE_OFFSET;
- data = (ADT7310_T13_VALUE_SIGN << 1) - data;
- sign = '-';
- }
- return sprintf(buf, "%c%d.%.4d\n", sign,
- (data >> ADT7310_T13_VALUE_FLOAT_OFFSET),
- (data & ADT7310_T13_VALUE_FLOAT_MASK) * 625);
- }
-}
-
-static ssize_t adt7310_show_value(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct iio_dev *dev_info = dev_to_iio_dev(dev);
- struct adt7310_chip_info *chip = iio_priv(dev_info);
- u8 status;
- u16 data;
- int ret, i = 0;
-
- do {
- ret = adt7310_spi_read_byte(chip, ADT7310_STATUS, &status);
- if (ret)
- return -EIO;
- i++;
- if (i == 10000)
- return -EIO;
- } while (status & ADT7310_STAT_NOT_RDY);
-
- ret = adt7310_spi_read_word(chip, ADT7310_TEMPERATURE, &data);
- if (ret)
- return -EIO;
-
- return adt7310_convert_temperature(chip, data, buf);
-}
-
-static IIO_DEVICE_ATTR(value, S_IRUGO, adt7310_show_value, NULL, 0);
-
-static struct attribute *adt7310_attributes[] = {
- &iio_dev_attr_available_modes.dev_attr.attr,
- &iio_dev_attr_mode.dev_attr.attr,
- &iio_dev_attr_resolution.dev_attr.attr,
- &iio_dev_attr_id.dev_attr.attr,
- &iio_dev_attr_value.dev_attr.attr,
- NULL,
-};
-
-static const struct attribute_group adt7310_attribute_group = {
- .attrs = adt7310_attributes,
-};
-
-static irqreturn_t adt7310_event_handler(int irq, void *private)
-{
- struct iio_dev *indio_dev = private;
- struct adt7310_chip_info *chip = iio_priv(indio_dev);
- s64 timestamp = iio_get_time_ns();
- u8 status;
- int ret;
-
- ret = adt7310_spi_read_byte(chip, ADT7310_STATUS, &status);
- if (ret)
- goto done;
-
- if (status & ADT7310_STAT_T_HIGH)
- iio_push_event(indio_dev,
- IIO_UNMOD_EVENT_CODE(IIO_TEMP, 0,
- IIO_EV_TYPE_THRESH,
- IIO_EV_DIR_RISING),
- timestamp);
- if (status & ADT7310_STAT_T_LOW)
- iio_push_event(indio_dev,
- IIO_UNMOD_EVENT_CODE(IIO_TEMP, 0,
- IIO_EV_TYPE_THRESH,
- IIO_EV_DIR_FALLING),
- timestamp);
- if (status & ADT7310_STAT_T_CRIT)
- iio_push_event(indio_dev,
- IIO_UNMOD_EVENT_CODE(IIO_TEMP, 0,
- IIO_EV_TYPE_THRESH,
- IIO_EV_DIR_RISING),
- timestamp);
-
-done:
- return IRQ_HANDLED;
-}
-
-static ssize_t adt7310_show_event_mode(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct iio_dev *dev_info = dev_to_iio_dev(dev);
- struct adt7310_chip_info *chip = iio_priv(dev_info);
- int ret;
-
- ret = adt7310_spi_read_byte(chip, ADT7310_CONFIG, &chip->config);
- if (ret)
- return -EIO;
-
- if (chip->config & ADT7310_EVENT_MODE)
- return sprintf(buf, "interrupt\n");
- else
- return sprintf(buf, "comparator\n");
-}
-
-static ssize_t adt7310_set_event_mode(struct device *dev,
- struct device_attribute *attr,
- const char *buf,
- size_t len)
-{
- struct iio_dev *dev_info = dev_to_iio_dev(dev);
- struct adt7310_chip_info *chip = iio_priv(dev_info);
- u16 config;
- int ret;
-
- ret = adt7310_spi_read_byte(chip, ADT7310_CONFIG, &chip->config);
- if (ret)
- return -EIO;
-
- config = chip->config &= ~ADT7310_EVENT_MODE;
- if (strcmp(buf, "comparator") != 0)
- config |= ADT7310_EVENT_MODE;
-
- ret = adt7310_spi_write_byte(chip, ADT7310_CONFIG, config);
- if (ret)
- return -EIO;
-
- chip->config = config;
-
- return len;
-}
-
-static ssize_t adt7310_show_available_event_modes(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- return sprintf(buf, "comparator\ninterrupt\n");
-}
-
-static ssize_t adt7310_show_fault_queue(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct iio_dev *dev_info = dev_to_iio_dev(dev);
- struct adt7310_chip_info *chip = iio_priv(dev_info);
- int ret;
-
- ret = adt7310_spi_read_byte(chip, ADT7310_CONFIG, &chip->config);
- if (ret)
- return -EIO;
-
- return sprintf(buf, "%d\n", chip->config & ADT7310_FAULT_QUEUE_MASK);
-}
-
-static ssize_t adt7310_set_fault_queue(struct device *dev,
- struct device_attribute *attr,
- const char *buf,
- size_t len)
-{
- struct iio_dev *dev_info = dev_to_iio_dev(dev);
- struct adt7310_chip_info *chip = iio_priv(dev_info);
- unsigned long data;
- int ret;
- u8 config;
-
- ret = strict_strtoul(buf, 10, &data);
- if (ret || data > 3)
- return -EINVAL;
-
- ret = adt7310_spi_read_byte(chip, ADT7310_CONFIG, &chip->config);
- if (ret)
- return -EIO;
-
- config = chip->config & ~ADT7310_FAULT_QUEUE_MASK;
- config |= data;
- ret = adt7310_spi_write_byte(chip, ADT7310_CONFIG, config);
- if (ret)
- return -EIO;
-
- chip->config = config;
-
- return len;
-}
-
-static inline ssize_t adt7310_show_t_bound(struct device *dev,
- struct device_attribute *attr,
- u8 bound_reg,
- char *buf)
-{
- struct iio_dev *dev_info = dev_to_iio_dev(dev);
- struct adt7310_chip_info *chip = iio_priv(dev_info);
- u16 data;
- int ret;
-
- ret = adt7310_spi_read_word(chip, bound_reg, &data);
- if (ret)
- return -EIO;
-
- return adt7310_convert_temperature(chip, data, buf);
-}
-
-static inline ssize_t adt7310_set_t_bound(struct device *dev,
- struct device_attribute *attr,
- u8 bound_reg,
- const char *buf,
- size_t len)
-{
- struct iio_dev *dev_info = dev_to_iio_dev(dev);
- struct adt7310_chip_info *chip = iio_priv(dev_info);
- long tmp1, tmp2;
- u16 data;
- char *pos;
- int ret;
-
- pos = strchr(buf, '.');
-
- ret = strict_strtol(buf, 10, &tmp1);
-
- if (ret || tmp1 > 127 || tmp1 < -128)
- return -EINVAL;
-
- if (pos) {
- len = strlen(pos);
-
- if (chip->config & ADT7310_RESOLUTION) {
- if (len > ADT7310_T16_VALUE_FLOAT_OFFSET)
- len = ADT7310_T16_VALUE_FLOAT_OFFSET;
- pos[len] = 0;
- ret = strict_strtol(pos, 10, &tmp2);
-
- if (!ret)
- tmp2 = (tmp2 / 78125) * 78125;
- } else {
- if (len > ADT7310_T13_VALUE_FLOAT_OFFSET)
- len = ADT7310_T13_VALUE_FLOAT_OFFSET;
- pos[len] = 0;
- ret = strict_strtol(pos, 10, &tmp2);
-
- if (!ret)
- tmp2 = (tmp2 / 625) * 625;
- }
- }
-
- if (tmp1 < 0)
- data = (u16)(-tmp1);
- else
- data = (u16)tmp1;
-
- if (chip->config & ADT7310_RESOLUTION) {
- data = (data << ADT7310_T16_VALUE_FLOAT_OFFSET) |
- (tmp2 & ADT7310_T16_VALUE_FLOAT_MASK);
-
- if (tmp1 < 0)
- /* convert positive value to supplyment */
- data = (u16)((ADT7310_T16_VALUE_SIGN << 1) - (u32)data);
- } else {
- data = (data << ADT7310_T13_VALUE_FLOAT_OFFSET) |
- (tmp2 & ADT7310_T13_VALUE_FLOAT_MASK);
-
- if (tmp1 < 0)
- /* convert positive value to supplyment */
- data = (ADT7310_T13_VALUE_SIGN << 1) - data;
- data <<= ADT7310_T13_VALUE_OFFSET;
- }
-
- ret = adt7310_spi_write_word(chip, bound_reg, data);
- if (ret)
- return -EIO;
-
- return len;
-}
-
-static ssize_t adt7310_show_t_alarm_high(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- return adt7310_show_t_bound(dev, attr,
- ADT7310_T_ALARM_HIGH, buf);
-}
-
-static inline ssize_t adt7310_set_t_alarm_high(struct device *dev,
- struct device_attribute *attr,
- const char *buf,
- size_t len)
-{
- return adt7310_set_t_bound(dev, attr,
- ADT7310_T_ALARM_HIGH, buf, len);
-}
-
-static ssize_t adt7310_show_t_alarm_low(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- return adt7310_show_t_bound(dev, attr,
- ADT7310_T_ALARM_LOW, buf);
-}
-
-static inline ssize_t adt7310_set_t_alarm_low(struct device *dev,
- struct device_attribute *attr,
- const char *buf,
- size_t len)
-{
- return adt7310_set_t_bound(dev, attr,
- ADT7310_T_ALARM_LOW, buf, len);
-}
-
-static ssize_t adt7310_show_t_crit(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- return adt7310_show_t_bound(dev, attr,
- ADT7310_T_CRIT, buf);
-}
-
-static inline ssize_t adt7310_set_t_crit(struct device *dev,
- struct device_attribute *attr,
- const char *buf,
- size_t len)
-{
- return adt7310_set_t_bound(dev, attr,
- ADT7310_T_CRIT, buf, len);
-}
-
-static ssize_t adt7310_show_t_hyst(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct iio_dev *dev_info = dev_to_iio_dev(dev);
- struct adt7310_chip_info *chip = iio_priv(dev_info);
- int ret;
- u8 t_hyst;
-
- ret = adt7310_spi_read_byte(chip, ADT7310_T_HYST, &t_hyst);
- if (ret)
- return -EIO;
-
- return sprintf(buf, "%d\n", t_hyst & ADT7310_T_HYST_MASK);
-}
-
-static inline ssize_t adt7310_set_t_hyst(struct device *dev,
- struct device_attribute *attr,
- const char *buf,
- size_t len)
-{
- struct iio_dev *dev_info = dev_to_iio_dev(dev);
- struct adt7310_chip_info *chip = iio_priv(dev_info);
- int ret;
- unsigned long data;
- u8 t_hyst;
-
- ret = strict_strtol(buf, 10, &data);
-
- if (ret || data > ADT7310_T_HYST_MASK)
- return -EINVAL;
-
- t_hyst = (u8)data;
-
- ret = adt7310_spi_write_byte(chip, ADT7310_T_HYST, t_hyst);
- if (ret)
- return -EIO;
-
- return len;
-}
-
-static IIO_DEVICE_ATTR(event_mode,
- S_IRUGO | S_IWUSR,
- adt7310_show_event_mode, adt7310_set_event_mode, 0);
-static IIO_DEVICE_ATTR(available_event_modes,
- S_IRUGO | S_IWUSR,
- adt7310_show_available_event_modes, NULL, 0);
-static IIO_DEVICE_ATTR(fault_queue,
- S_IRUGO | S_IWUSR,
- adt7310_show_fault_queue, adt7310_set_fault_queue, 0);
-static IIO_DEVICE_ATTR(t_alarm_high,
- S_IRUGO | S_IWUSR,
- adt7310_show_t_alarm_high, adt7310_set_t_alarm_high, 0);
-static IIO_DEVICE_ATTR(t_alarm_low,
- S_IRUGO | S_IWUSR,
- adt7310_show_t_alarm_low, adt7310_set_t_alarm_low, 0);
-static IIO_DEVICE_ATTR(t_crit,
- S_IRUGO | S_IWUSR,
- adt7310_show_t_crit, adt7310_set_t_crit, 0);
-static IIO_DEVICE_ATTR(t_hyst,
- S_IRUGO | S_IWUSR,
- adt7310_show_t_hyst, adt7310_set_t_hyst, 0);
-
-static struct attribute *adt7310_event_int_attributes[] = {
- &iio_dev_attr_event_mode.dev_attr.attr,
- &iio_dev_attr_available_event_modes.dev_attr.attr,
- &iio_dev_attr_fault_queue.dev_attr.attr,
- &iio_dev_attr_t_alarm_high.dev_attr.attr,
- &iio_dev_attr_t_alarm_low.dev_attr.attr,
- &iio_dev_attr_t_crit.dev_attr.attr,
- &iio_dev_attr_t_hyst.dev_attr.attr,
- NULL,
-};
-
-static struct attribute_group adt7310_event_attribute_group = {
- .attrs = adt7310_event_int_attributes,
- .name = "events",
-};
-
-static const struct iio_info adt7310_info = {
- .attrs = &adt7310_attribute_group,
- .event_attrs = &adt7310_event_attribute_group,
- .driver_module = THIS_MODULE,
-};
-
-/*
- * device probe and remove
- */
-
-static int __devinit adt7310_probe(struct spi_device *spi_dev)
-{
- struct adt7310_chip_info *chip;
- struct iio_dev *indio_dev;
- int ret = 0;
- unsigned long *adt7310_platform_data = spi_dev->dev.platform_data;
- unsigned long irq_flags;
-
- indio_dev = iio_device_alloc(sizeof(*chip));
- if (indio_dev == NULL) {
- ret = -ENOMEM;
- goto error_ret;
- }
- chip = iio_priv(indio_dev);
- /* this is only used for device removal purposes */
- dev_set_drvdata(&spi_dev->dev, indio_dev);
-
- chip->spi_dev = spi_dev;
-
- indio_dev->dev.parent = &spi_dev->dev;
- indio_dev->name = spi_get_device_id(spi_dev)->name;
- indio_dev->info = &adt7310_info;
- indio_dev->modes = INDIO_DIRECT_MODE;
-
- /* CT critcal temperature event. line 0 */
- if (spi_dev->irq) {
- if (adt7310_platform_data[2])
- irq_flags = adt7310_platform_data[2];
- else
- irq_flags = IRQF_TRIGGER_LOW;
- ret = request_threaded_irq(spi_dev->irq,
- NULL,
- &adt7310_event_handler,
- irq_flags | IRQF_ONESHOT,
- indio_dev->name,
- indio_dev);
- if (ret)
- goto error_free_dev;
- }
-
- /* INT bound temperature alarm event. line 1 */
- if (adt7310_platform_data[0]) {
- ret = request_threaded_irq(adt7310_platform_data[0],
- NULL,
- &adt7310_event_handler,
- adt7310_platform_data[1] |
- IRQF_ONESHOT,
- indio_dev->name,
- indio_dev);
- if (ret)
- goto error_unreg_ct_irq;
- }
-
- if (spi_dev->irq && adt7310_platform_data[0]) {
- ret = adt7310_spi_read_byte(chip, ADT7310_CONFIG, &chip->config);
- if (ret) {
- ret = -EIO;
- goto error_unreg_int_irq;
- }
-
- /* set irq polarity low level */
- chip->config &= ~ADT7310_CT_POLARITY;
-
- if (adt7310_platform_data[1] & IRQF_TRIGGER_HIGH)
- chip->config |= ADT7310_INT_POLARITY;
- else
- chip->config &= ~ADT7310_INT_POLARITY;
-
- ret = adt7310_spi_write_byte(chip, ADT7310_CONFIG, chip->config);
- if (ret) {
- ret = -EIO;
- goto error_unreg_int_irq;
- }
- }
-
- ret = iio_device_register(indio_dev);
- if (ret)
- goto error_unreg_int_irq;
-
- dev_info(&spi_dev->dev, "%s temperature sensor registered.\n",
- indio_dev->name);
-
- return 0;
-
-error_unreg_int_irq:
- free_irq(adt7310_platform_data[0], indio_dev);
-error_unreg_ct_irq:
- free_irq(spi_dev->irq, indio_dev);
-error_free_dev:
- iio_device_free(indio_dev);
-error_ret:
- return ret;
-}
-
-static int __devexit adt7310_remove(struct spi_device *spi_dev)
-{
- struct iio_dev *indio_dev = dev_get_drvdata(&spi_dev->dev);
- unsigned long *adt7310_platform_data = spi_dev->dev.platform_data;
-
- iio_device_unregister(indio_dev);
- dev_set_drvdata(&spi_dev->dev, NULL);
- if (adt7310_platform_data[0])
- free_irq(adt7310_platform_data[0], indio_dev);
- if (spi_dev->irq)
- free_irq(spi_dev->irq, indio_dev);
- iio_device_free(indio_dev);
-
- return 0;
-}
-
-static const struct spi_device_id adt7310_id[] = {
- { "adt7310", 0 },
- {}
-};
-
-MODULE_DEVICE_TABLE(spi, adt7310_id);
-
-static struct spi_driver adt7310_driver = {
- .driver = {
- .name = "adt7310",
- .owner = THIS_MODULE,
- },
- .probe = adt7310_probe,
- .remove = __devexit_p(adt7310_remove),
- .id_table = adt7310_id,
-};
-module_spi_driver(adt7310_driver);
-
-MODULE_AUTHOR("Sonic Zhang <sonic.zhang@analog.com>");
-MODULE_DESCRIPTION("Analog Devices ADT7310 digital"
- " temperature sensor driver");
-MODULE_LICENSE("GPL v2");
diff --git a/drivers/staging/iio/adc/adt7410.c b/drivers/staging/iio/adc/adt7410.c
index 4157596..35455e1 100644
--- a/drivers/staging/iio/adc/adt7410.c
+++ b/drivers/staging/iio/adc/adt7410.c
@@ -1,5 +1,5 @@
/*
- * ADT7410 digital temperature sensor driver supporting ADT7410
+ * ADT7410 digital temperature sensor driver supporting ADT7310/ADT7410
*
* Copyright 2010 Analog Devices Inc.
*
@@ -13,6 +13,7 @@
#include <linux/sysfs.h>
#include <linux/list.h>
#include <linux/i2c.h>
+#include <linux/spi/spi.h>
#include <linux/module.h>
#include <linux/iio/iio.h>
@@ -34,6 +35,19 @@
#define ADT7410_RESET 0x2F
/*
+ * ADT7310 registers definition
+ */
+
+#define ADT7310_STATUS 0
+#define ADT7310_CONFIG 1
+#define ADT7310_TEMPERATURE 2
+#define ADT7310_ID 3
+#define ADT7310_T_CRIT 4
+#define ADT7310_T_HYST 5
+#define ADT7310_T_ALARM_HIGH 6
+#define ADT7310_T_ALARM_LOW 7
+
+/*
* ADT7410 status
*/
#define ADT7410_STAT_T_LOW 0x10
@@ -69,75 +83,52 @@
#define ADT7410_MANUFACTORY_ID_MASK 0xF0
#define ADT7410_MANUFACTORY_ID_OFFSET 4
+
+#define ADT7310_CMD_REG_MASK 0x28
+#define ADT7310_CMD_REG_OFFSET 3
+#define ADT7310_CMD_READ 0x40
+#define ADT7310_CMD_CON_READ 0x4
+
#define ADT7410_IRQS 2
/*
* struct adt7410_chip_info - chip specifc information
*/
-struct adt7410_chip_info {
- struct i2c_client *client;
- u8 config;
+struct adt7410_chip_info;
+
+struct adt7410_ops {
+ int (*read_word)(struct adt7410_chip_info *, u8 reg, u16 *data);
+ int (*write_word)(struct adt7410_chip_info *, u8 reg, u16 data);
+ int (*read_byte)(struct adt7410_chip_info *, u8 reg, u8 *data);
+ int (*write_byte)(struct adt7410_chip_info *, u8 reg, u8 data);
};
-/*
- * adt7410 register access by I2C
- */
+struct adt7410_chip_info {
+ struct device *dev;
+ u8 config;
-static int adt7410_i2c_read_word(struct adt7410_chip_info *chip, u8 reg, u16 *data)
+ const struct adt7410_ops *ops;
+};
+
+static int adt7410_read_word(struct adt7410_chip_info *chip, u8 reg, u16 *data)
{
- struct i2c_client *client = chip->client;
- int ret = 0;
-
- ret = i2c_smbus_read_word_data(client, reg);
- if (ret < 0) {
- dev_err(&client->dev, "I2C read error\n");
- return ret;
- }
-
- *data = swab16((u16)ret);
-
- return 0;
+ return chip->ops->read_word(chip, reg, data);
}
-static int adt7410_i2c_write_word(struct adt7410_chip_info *chip, u8 reg, u16 data)
+static int adt7410_write_word(struct adt7410_chip_info *chip, u8 reg, u16 data)
{
- struct i2c_client *client = chip->client;
- int ret = 0;
-
- ret = i2c_smbus_write_word_data(client, reg, swab16(data));
- if (ret < 0)
- dev_err(&client->dev, "I2C write error\n");
-
- return ret;
+ return chip->ops->write_word(chip, reg, data);
}
-static int adt7410_i2c_read_byte(struct adt7410_chip_info *chip, u8 reg, u8 *data)
+static int adt7410_read_byte(struct adt7410_chip_info *chip, u8 reg, u8 *data)
{
- struct i2c_client *client = chip->client;
- int ret = 0;
-
- ret = i2c_smbus_read_byte_data(client, reg);
- if (ret < 0) {
- dev_err(&client->dev, "I2C read error\n");
- return ret;
- }
-
- *data = (u8)ret;
-
- return 0;
+ return chip->ops->read_byte(chip, reg, data);
}
-static int adt7410_i2c_write_byte(struct adt7410_chip_info *chip, u8 reg, u8 data)
+static int adt7410_write_byte(struct adt7410_chip_info *chip, u8 reg, u8 data)
{
- struct i2c_client *client = chip->client;
- int ret = 0;
-
- ret = i2c_smbus_write_byte_data(client, reg, data);
- if (ret < 0)
- dev_err(&client->dev, "I2C write error\n");
-
- return ret;
+ return chip->ops->write_byte(chip, reg, data);
}
static ssize_t adt7410_show_mode(struct device *dev,
@@ -172,7 +163,7 @@
u16 config;
int ret;
- ret = adt7410_i2c_read_byte(chip, ADT7410_CONFIG, &chip->config);
+ ret = adt7410_read_byte(chip, ADT7410_CONFIG, &chip->config);
if (ret)
return -EIO;
@@ -184,13 +175,13 @@
else if (strcmp(buf, "sps"))
config |= ADT7410_SPS;
- ret = adt7410_i2c_write_byte(chip, ADT7410_CONFIG, config);
+ ret = adt7410_write_byte(chip, ADT7410_CONFIG, config);
if (ret)
return -EIO;
chip->config = config;
- return ret;
+ return len;
}
static IIO_DEVICE_ATTR(mode, S_IRUGO | S_IWUSR,
@@ -216,7 +207,7 @@
int ret;
int bits;
- ret = adt7410_i2c_read_byte(chip, ADT7410_CONFIG, &chip->config);
+ ret = adt7410_read_byte(chip, ADT7410_CONFIG, &chip->config);
if (ret)
return -EIO;
@@ -243,7 +234,7 @@
if (ret)
return -EINVAL;
- ret = adt7410_i2c_read_byte(chip, ADT7410_CONFIG, &chip->config);
+ ret = adt7410_read_byte(chip, ADT7410_CONFIG, &chip->config);
if (ret)
return -EIO;
@@ -251,7 +242,7 @@
if (data)
config |= ADT7410_RESOLUTION;
- ret = adt7410_i2c_write_byte(chip, ADT7410_CONFIG, config);
+ ret = adt7410_write_byte(chip, ADT7410_CONFIG, config);
if (ret)
return -EIO;
@@ -274,7 +265,7 @@
u8 id;
int ret;
- ret = adt7410_i2c_read_byte(chip, ADT7410_ID, &id);
+ ret = adt7410_read_byte(chip, ADT7410_ID, &id);
if (ret)
return -EIO;
@@ -317,7 +308,7 @@
int ret, i = 0;
do {
- ret = adt7410_i2c_read_byte(chip, ADT7410_STATUS, &status);
+ ret = adt7410_read_byte(chip, ADT7410_STATUS, &status);
if (ret)
return -EIO;
i++;
@@ -325,7 +316,7 @@
return -EIO;
} while (status & ADT7410_STAT_NOT_RDY);
- ret = adt7410_i2c_read_word(chip, ADT7410_TEMPERATURE, &data);
+ ret = adt7410_read_word(chip, ADT7410_TEMPERATURE, &data);
if (ret)
return -EIO;
@@ -354,7 +345,7 @@
s64 timestamp = iio_get_time_ns();
u8 status;
- if (adt7410_i2c_read_byte(chip, ADT7410_STATUS, &status))
+ if (adt7410_read_byte(chip, ADT7410_STATUS, &status))
return IRQ_HANDLED;
if (status & ADT7410_STAT_T_HIGH)
@@ -387,7 +378,7 @@
struct adt7410_chip_info *chip = iio_priv(dev_info);
int ret;
- ret = adt7410_i2c_read_byte(chip, ADT7410_CONFIG, &chip->config);
+ ret = adt7410_read_byte(chip, ADT7410_CONFIG, &chip->config);
if (ret)
return -EIO;
@@ -407,7 +398,7 @@
u16 config;
int ret;
- ret = adt7410_i2c_read_byte(chip, ADT7410_CONFIG, &chip->config);
+ ret = adt7410_read_byte(chip, ADT7410_CONFIG, &chip->config);
if (ret)
return -EIO;
@@ -415,7 +406,7 @@
if (strcmp(buf, "comparator") != 0)
config |= ADT7410_EVENT_MODE;
- ret = adt7410_i2c_write_byte(chip, ADT7410_CONFIG, config);
+ ret = adt7410_write_byte(chip, ADT7410_CONFIG, config);
if (ret)
return -EIO;
@@ -439,7 +430,7 @@
struct adt7410_chip_info *chip = iio_priv(dev_info);
int ret;
- ret = adt7410_i2c_read_byte(chip, ADT7410_CONFIG, &chip->config);
+ ret = adt7410_read_byte(chip, ADT7410_CONFIG, &chip->config);
if (ret)
return -EIO;
@@ -461,13 +452,13 @@
if (ret || data > 3)
return -EINVAL;
- ret = adt7410_i2c_read_byte(chip, ADT7410_CONFIG, &chip->config);
+ ret = adt7410_read_byte(chip, ADT7410_CONFIG, &chip->config);
if (ret)
return -EIO;
config = chip->config & ~ADT7410_FAULT_QUEUE_MASK;
config |= data;
- ret = adt7410_i2c_write_byte(chip, ADT7410_CONFIG, config);
+ ret = adt7410_write_byte(chip, ADT7410_CONFIG, config);
if (ret)
return -EIO;
@@ -486,7 +477,7 @@
u16 data;
int ret;
- ret = adt7410_i2c_read_word(chip, bound_reg, &data);
+ ret = adt7410_read_word(chip, bound_reg, &data);
if (ret)
return -EIO;
@@ -557,7 +548,7 @@
data <<= ADT7410_T13_VALUE_OFFSET;
}
- ret = adt7410_i2c_write_word(chip, bound_reg, data);
+ ret = adt7410_write_word(chip, bound_reg, data);
if (ret)
return -EIO;
@@ -624,7 +615,7 @@
int ret;
u8 t_hyst;
- ret = adt7410_i2c_read_byte(chip, ADT7410_T_HYST, &t_hyst);
+ ret = adt7410_read_byte(chip, ADT7410_T_HYST, &t_hyst);
if (ret)
return -EIO;
@@ -649,7 +640,7 @@
t_hyst = (u8)data;
- ret = adt7410_i2c_write_byte(chip, ADT7410_T_HYST, t_hyst);
+ ret = adt7410_write_byte(chip, ADT7410_T_HYST, t_hyst);
if (ret)
return -EIO;
@@ -704,14 +695,14 @@
* device probe and remove
*/
-static int __devinit adt7410_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
+static int adt7410_probe(struct device *dev, int irq,
+ const char *name, const struct adt7410_ops *ops)
{
+ unsigned long *adt7410_platform_data = dev->platform_data;
+ unsigned long local_pdata[] = {0, 0};
struct adt7410_chip_info *chip;
struct iio_dev *indio_dev;
int ret = 0;
- unsigned long *adt7410_platform_data = client->dev.platform_data;
- unsigned long local_pdata[] = {0, 0};
indio_dev = iio_device_alloc(sizeof(*chip));
if (indio_dev == NULL) {
@@ -720,12 +711,13 @@
}
chip = iio_priv(indio_dev);
/* this is only used for device removal purposes */
- i2c_set_clientdata(client, indio_dev);
+ dev_set_drvdata(dev, indio_dev);
- chip->client = client;
+ chip->dev = dev;
+ chip->ops = ops;
- indio_dev->name = id->name;
- indio_dev->dev.parent = &client->dev;
+ indio_dev->name = name;
+ indio_dev->dev.parent = dev;
indio_dev->info = &adt7410_info;
indio_dev->modes = INDIO_DIRECT_MODE;
@@ -733,12 +725,12 @@
adt7410_platform_data = local_pdata;
/* CT critcal temperature event. line 0 */
- if (client->irq) {
- ret = request_threaded_irq(client->irq,
+ if (irq) {
+ ret = request_threaded_irq(irq,
NULL,
&adt7410_event_handler,
IRQF_TRIGGER_LOW | IRQF_ONESHOT,
- id->name,
+ name,
indio_dev);
if (ret)
goto error_free_dev;
@@ -751,13 +743,13 @@
&adt7410_event_handler,
adt7410_platform_data[1] |
IRQF_ONESHOT,
- id->name,
+ name,
indio_dev);
if (ret)
goto error_unreg_ct_irq;
}
- ret = adt7410_i2c_read_byte(chip, ADT7410_CONFIG, &chip->config);
+ ret = adt7410_read_byte(chip, ADT7410_CONFIG, &chip->config);
if (ret) {
ret = -EIO;
goto error_unreg_int_irq;
@@ -765,7 +757,7 @@
chip->config |= ADT7410_RESOLUTION;
- if (client->irq && adt7410_platform_data[0]) {
+ if (irq && adt7410_platform_data[0]) {
/* set irq polarity low level */
chip->config &= ~ADT7410_CT_POLARITY;
@@ -776,7 +768,7 @@
chip->config &= ~ADT7410_INT_POLARITY;
}
- ret = adt7410_i2c_write_byte(chip, ADT7410_CONFIG, chip->config);
+ ret = adt7410_write_byte(chip, ADT7410_CONFIG, chip->config);
if (ret) {
ret = -EIO;
goto error_unreg_int_irq;
@@ -785,36 +777,117 @@
if (ret)
goto error_unreg_int_irq;
- dev_info(&client->dev, "%s temperature sensor registered.\n",
- id->name);
+ dev_info(dev, "%s temperature sensor registered.\n",
+ name);
return 0;
error_unreg_int_irq:
free_irq(adt7410_platform_data[0], indio_dev);
error_unreg_ct_irq:
- free_irq(client->irq, indio_dev);
+ free_irq(irq, indio_dev);
error_free_dev:
iio_device_free(indio_dev);
error_ret:
return ret;
}
-static int __devexit adt7410_remove(struct i2c_client *client)
+static int adt7410_remove(struct device *dev, int irq)
{
- struct iio_dev *indio_dev = i2c_get_clientdata(client);
- unsigned long *adt7410_platform_data = client->dev.platform_data;
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+ unsigned long *adt7410_platform_data = dev->platform_data;
iio_device_unregister(indio_dev);
if (adt7410_platform_data[0])
free_irq(adt7410_platform_data[0], indio_dev);
- if (client->irq)
- free_irq(client->irq, indio_dev);
+ if (irq)
+ free_irq(irq, indio_dev);
iio_device_free(indio_dev);
return 0;
}
+#if IS_ENABLED(CONFIG_I2C)
+
+static int adt7410_i2c_read_word(struct adt7410_chip_info *chip, u8 reg,
+ u16 *data)
+{
+ struct i2c_client *client = to_i2c_client(chip->dev);
+ int ret = 0;
+
+ ret = i2c_smbus_read_word_data(client, reg);
+ if (ret < 0) {
+ dev_err(&client->dev, "I2C read error\n");
+ return ret;
+ }
+
+ *data = swab16((u16)ret);
+
+ return 0;
+}
+
+static int adt7410_i2c_write_word(struct adt7410_chip_info *chip, u8 reg,
+ u16 data)
+{
+ struct i2c_client *client = to_i2c_client(chip->dev);
+ int ret = 0;
+
+ ret = i2c_smbus_write_word_data(client, reg, swab16(data));
+ if (ret < 0)
+ dev_err(&client->dev, "I2C write error\n");
+
+ return ret;
+}
+
+static int adt7410_i2c_read_byte(struct adt7410_chip_info *chip, u8 reg,
+ u8 *data)
+{
+ struct i2c_client *client = to_i2c_client(chip->dev);
+ int ret = 0;
+
+ ret = i2c_smbus_read_byte_data(client, reg);
+ if (ret < 0) {
+ dev_err(&client->dev, "I2C read error\n");
+ return ret;
+ }
+
+ *data = (u8)ret;
+
+ return 0;
+}
+
+static int adt7410_i2c_write_byte(struct adt7410_chip_info *chip, u8 reg,
+ u8 data)
+{
+ struct i2c_client *client = to_i2c_client(chip->dev);
+ int ret = 0;
+
+ ret = i2c_smbus_write_byte_data(client, reg, data);
+ if (ret < 0)
+ dev_err(&client->dev, "I2C write error\n");
+
+ return ret;
+}
+
+static const struct adt7410_ops adt7410_i2c_ops = {
+ .read_word = adt7410_i2c_read_word,
+ .write_word = adt7410_i2c_write_word,
+ .read_byte = adt7410_i2c_read_byte,
+ .write_byte = adt7410_i2c_write_byte,
+};
+
+static int adt7410_i2c_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ return adt7410_probe(&client->dev, client->irq, id->name,
+ &adt7410_i2c_ops);
+}
+
+static int adt7410_i2c_remove(struct i2c_client *client)
+{
+ return adt7410_remove(&client->dev, client->irq);
+}
+
static const struct i2c_device_id adt7410_id[] = {
{ "adt7410", 0 },
{}
@@ -826,13 +899,204 @@
.driver = {
.name = "adt7410",
},
- .probe = adt7410_probe,
- .remove = __devexit_p(adt7410_remove),
+ .probe = adt7410_i2c_probe,
+ .remove = adt7410_i2c_remove,
.id_table = adt7410_id,
};
-module_i2c_driver(adt7410_driver);
+
+static int __init adt7410_i2c_init(void)
+{
+ return i2c_add_driver(&adt7410_driver);
+}
+
+static void __exit adt7410_i2c_exit(void)
+{
+ i2c_del_driver(&adt7410_driver);
+}
+
+#else
+
+static int __init adt7410_i2c_init(void) { return 0; };
+static void __exit adt7410_i2c_exit(void) {};
+
+#endif
+
+#if IS_ENABLED(CONFIG_SPI_MASTER)
+
+static const u8 adt7371_reg_table[] = {
+ [ADT7410_TEMPERATURE] = ADT7310_TEMPERATURE,
+ [ADT7410_STATUS] = ADT7310_STATUS,
+ [ADT7410_CONFIG] = ADT7310_CONFIG,
+ [ADT7410_T_ALARM_HIGH] = ADT7310_T_ALARM_HIGH,
+ [ADT7410_T_ALARM_LOW] = ADT7310_T_ALARM_LOW,
+ [ADT7410_T_CRIT] = ADT7310_T_CRIT,
+ [ADT7410_T_HYST] = ADT7310_T_HYST,
+ [ADT7410_ID] = ADT7310_ID,
+};
+
+#define AD7310_COMMAND(reg) (adt7371_reg_table[(reg)] << ADT7310_CMD_REG_OFFSET)
+
+static int adt7310_spi_read_word(struct adt7410_chip_info *chip,
+ u8 reg, u16 *data)
+{
+ struct spi_device *spi = to_spi_device(chip->dev);
+ u8 command = AD7310_COMMAND(reg);
+ int ret = 0;
+
+ command |= ADT7310_CMD_READ;
+ ret = spi_write(spi, &command, sizeof(command));
+ if (ret < 0) {
+ dev_err(&spi->dev, "SPI write command error\n");
+ return ret;
+ }
+
+ ret = spi_read(spi, (u8 *)data, sizeof(*data));
+ if (ret < 0) {
+ dev_err(&spi->dev, "SPI read word error\n");
+ return ret;
+ }
+
+ *data = be16_to_cpu(*data);
+
+ return 0;
+}
+
+static int adt7310_spi_write_word(struct adt7410_chip_info *chip, u8 reg,
+ u16 data)
+{
+ struct spi_device *spi = to_spi_device(chip->dev);
+ u8 buf[3];
+ int ret = 0;
+
+ buf[0] = AD7310_COMMAND(reg);
+ buf[1] = (u8)(data >> 8);
+ buf[2] = (u8)(data & 0xFF);
+
+ ret = spi_write(spi, buf, 3);
+ if (ret < 0) {
+ dev_err(&spi->dev, "SPI write word error\n");
+ return ret;
+ }
+
+ return ret;
+}
+
+static int adt7310_spi_read_byte(struct adt7410_chip_info *chip, u8 reg,
+ u8 *data)
+{
+ struct spi_device *spi = to_spi_device(chip->dev);
+ u8 command = AD7310_COMMAND(reg);
+ int ret = 0;
+
+ command |= ADT7310_CMD_READ;
+ ret = spi_write(spi, &command, sizeof(command));
+ if (ret < 0) {
+ dev_err(&spi->dev, "SPI write command error\n");
+ return ret;
+ }
+
+ ret = spi_read(spi, data, sizeof(*data));
+ if (ret < 0) {
+ dev_err(&spi->dev, "SPI read byte error\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static int adt7310_spi_write_byte(struct adt7410_chip_info *chip, u8 reg,
+ u8 data)
+{
+ struct spi_device *spi = to_spi_device(chip->dev);
+ u8 buf[2];
+ int ret = 0;
+
+ buf[0] = AD7310_COMMAND(reg);
+ buf[1] = data;
+
+ ret = spi_write(spi, buf, 2);
+ if (ret < 0) {
+ dev_err(&spi->dev, "SPI write byte error\n");
+ return ret;
+ }
+
+ return ret;
+}
+
+static const struct adt7410_ops adt7310_spi_ops = {
+ .read_word = adt7310_spi_read_word,
+ .write_word = adt7310_spi_write_word,
+ .read_byte = adt7310_spi_read_byte,
+ .write_byte = adt7310_spi_write_byte,
+};
+
+static int adt7310_spi_probe(struct spi_device *spi)
+{
+ return adt7410_probe(&spi->dev, spi->irq,
+ spi_get_device_id(spi)->name, &adt7310_spi_ops);
+}
+
+static int adt7310_spi_remove(struct spi_device *spi)
+{
+ return adt7410_remove(&spi->dev, spi->irq);
+}
+
+static const struct spi_device_id adt7310_id[] = {
+ { "adt7310", 0 },
+ {}
+};
+MODULE_DEVICE_TABLE(spi, adt7310_id);
+
+static struct spi_driver adt7310_driver = {
+ .driver = {
+ .name = "adt7310",
+ .owner = THIS_MODULE,
+ },
+ .probe = adt7310_spi_probe,
+ .remove = adt7310_spi_remove,
+ .id_table = adt7310_id,
+};
+
+static int __init adt7310_spi_init(void)
+{
+ return spi_register_driver(&adt7310_driver);
+}
+
+static void adt7310_spi_exit(void)
+{
+ spi_unregister_driver(&adt7310_driver);
+}
+
+#else
+
+static int __init adt7310_spi_init(void) { return 0; };
+static void adt7310_spi_exit(void) {};
+
+#endif
+
+static int __init adt7410_init(void)
+{
+ int ret;
+
+ ret = adt7310_spi_init();
+ if (ret)
+ return ret;
+
+ ret = adt7410_i2c_init();
+ if (ret)
+ adt7310_spi_exit();
+
+ return ret;
+}
+module_init(adt7410_init);
+
+static void __exit adt7410_exit(void)
+{
+ adt7410_i2c_exit();
+ adt7310_spi_exit();
+}
+module_exit(adt7410_exit);
MODULE_AUTHOR("Sonic Zhang <sonic.zhang@analog.com>");
-MODULE_DESCRIPTION("Analog Devices ADT7410 digital"
- " temperature sensor driver");
+MODULE_DESCRIPTION("Analog Devices ADT7310/ADT7410 digital temperature sensor driver");
MODULE_LICENSE("GPL v2");
diff --git a/drivers/staging/iio/adc/lpc32xx_adc.c b/drivers/staging/iio/adc/lpc32xx_adc.c
index 7e9bd00..0bf2a6c 100644
--- a/drivers/staging/iio/adc/lpc32xx_adc.c
+++ b/drivers/staging/iio/adc/lpc32xx_adc.c
@@ -126,7 +126,7 @@
return IRQ_HANDLED;
}
-static int __devinit lpc32xx_adc_probe(struct platform_device *pdev)
+static int lpc32xx_adc_probe(struct platform_device *pdev)
{
struct lpc32xx_adc_info *info = NULL;
struct resource *res;
@@ -150,7 +150,7 @@
info = iio_priv(iodev);
- info->adc_base = ioremap(res->start, res->end - res->start + 1);
+ info->adc_base = ioremap(res->start, resource_size(res));
if (!info->adc_base) {
dev_err(&pdev->dev, "failed mapping memory\n");
retval = -EBUSY;
@@ -207,7 +207,7 @@
return retval;
}
-static int __devexit lpc32xx_adc_remove(struct platform_device *pdev)
+static int lpc32xx_adc_remove(struct platform_device *pdev)
{
struct iio_dev *iodev = platform_get_drvdata(pdev);
struct lpc32xx_adc_info *info = iio_priv(iodev);
@@ -233,7 +233,7 @@
static struct platform_driver lpc32xx_adc_driver = {
.probe = lpc32xx_adc_probe,
- .remove = __devexit_p(lpc32xx_adc_remove),
+ .remove = lpc32xx_adc_remove,
.driver = {
.name = MOD_NAME,
.owner = THIS_MODULE,
diff --git a/drivers/staging/iio/adc/max1363.h b/drivers/staging/iio/adc/max1363.h
deleted file mode 100644
index c746918..0000000
--- a/drivers/staging/iio/adc/max1363.h
+++ /dev/null
@@ -1,177 +0,0 @@
-#ifndef _MAX1363_H_
-#define _MAX1363_H_
-
-#define MAX1363_SETUP_BYTE(a) ((a) | 0x80)
-
-/* There is a fair bit more defined here than currently
- * used, but the intention is to support everything these
- * chips do in the long run */
-
-/* see data sheets */
-/* max1363 and max1236, max1237, max1238, max1239 */
-#define MAX1363_SETUP_AIN3_IS_AIN3_REF_IS_VDD 0x00
-#define MAX1363_SETUP_AIN3_IS_REF_EXT_TO_REF 0x20
-#define MAX1363_SETUP_AIN3_IS_AIN3_REF_IS_INT 0x40
-#define MAX1363_SETUP_AIN3_IS_REF_REF_IS_INT 0x60
-#define MAX1363_SETUP_POWER_UP_INT_REF 0x10
-#define MAX1363_SETUP_POWER_DOWN_INT_REF 0x00
-
-/* think about includeing max11600 etc - more settings */
-#define MAX1363_SETUP_EXT_CLOCK 0x08
-#define MAX1363_SETUP_INT_CLOCK 0x00
-#define MAX1363_SETUP_UNIPOLAR 0x00
-#define MAX1363_SETUP_BIPOLAR 0x04
-#define MAX1363_SETUP_RESET 0x00
-#define MAX1363_SETUP_NORESET 0x02
-/* max1363 only - though don't care on others.
- * For now monitor modes are not implemented as the relevant
- * line is not connected on my test board.
- * The definitions are here as I intend to add this soon.
- */
-#define MAX1363_SETUP_MONITOR_SETUP 0x01
-
-/* Specific to the max1363 */
-#define MAX1363_MON_RESET_CHAN(a) (1 << ((a) + 4))
-#define MAX1363_MON_INT_ENABLE 0x01
-
-/* defined for readability reasons */
-/* All chips */
-#define MAX1363_CONFIG_BYTE(a) ((a))
-
-#define MAX1363_CONFIG_SE 0x01
-#define MAX1363_CONFIG_DE 0x00
-#define MAX1363_CONFIG_SCAN_TO_CS 0x00
-#define MAX1363_CONFIG_SCAN_SINGLE_8 0x20
-#define MAX1363_CONFIG_SCAN_MONITOR_MODE 0x40
-#define MAX1363_CONFIG_SCAN_SINGLE_1 0x60
-/* max123{6-9} only */
-#define MAX1236_SCAN_MID_TO_CHANNEL 0x40
-
-/* max1363 only - merely part of channel selects or don't care for others*/
-#define MAX1363_CONFIG_EN_MON_MODE_READ 0x18
-
-#define MAX1363_CHANNEL_SEL(a) ((a) << 1)
-
-/* max1363 strictly 0x06 - but doesn't matter */
-#define MAX1363_CHANNEL_SEL_MASK 0x1E
-#define MAX1363_SCAN_MASK 0x60
-#define MAX1363_SE_DE_MASK 0x01
-
-#define MAX1363_MAX_CHANNELS 25
-/**
- * struct max1363_mode - scan mode information
- * @conf: The corresponding value of the configuration register
- * @modemask: Bit mask corresponding to channels enabled in this mode
- */
-struct max1363_mode {
- int8_t conf;
- DECLARE_BITMAP(modemask, MAX1363_MAX_CHANNELS);
-};
-
-/* This must be maintained along side the max1363_mode_table in max1363_core */
-enum max1363_modes {
- /* Single read of a single channel */
- _s0, _s1, _s2, _s3, _s4, _s5, _s6, _s7, _s8, _s9, _s10, _s11,
- /* Differential single read */
- d0m1, d2m3, d4m5, d6m7, d8m9, d10m11,
- d1m0, d3m2, d5m4, d7m6, d9m8, d11m10,
- /* Scan to channel and mid to channel where overlapping */
- s0to1, s0to2, s2to3, s0to3, s0to4, s0to5, s0to6,
- s6to7, s0to7, s6to8, s0to8, s6to9,
- s0to9, s6to10, s0to10, s6to11, s0to11,
- /* Differential scan to channel and mid to channel where overlapping */
- d0m1to2m3, d0m1to4m5, d0m1to6m7, d6m7to8m9,
- d0m1to8m9, d6m7to10m11, d0m1to10m11, d1m0to3m2,
- d1m0to5m4, d1m0to7m6, d7m6to9m8, d1m0to9m8,
- d7m6to11m10, d1m0to11m10,
-};
-
-/**
- * struct max1363_chip_info - chip specifc information
- * @name: indentification string for chip
- * @bits: accuracy of the adc in bits
- * @int_vref_mv: the internal reference voltage
- * @info: iio core function callbacks structure
- * @mode_list: array of available scan modes
- * @num_modes: the number of scan modes available
- * @default_mode: the scan mode in which the chip starts up
- * @channel: channel specification
- * @num_channels: number of channels
- */
-struct max1363_chip_info {
- const struct iio_info *info;
- const struct iio_chan_spec *channels;
- int num_channels;
- const enum max1363_modes *mode_list;
- enum max1363_modes default_mode;
- u16 int_vref_mv;
- u8 num_modes;
- u8 bits;
-};
-
-/**
- * struct max1363_state - driver instance specific data
- * @client: i2c_client
- * @setupbyte: cache of current device setup byte
- * @configbyte: cache of current device config byte
- * @chip_info: chip model specific constants, available modes etc
- * @current_mode: the scan mode of this chip
- * @requestedmask: a valid requested set of channels
- * @reg: supply regulator
- * @monitor_on: whether monitor mode is enabled
- * @monitor_speed: parameter corresponding to device monitor speed setting
- * @mask_high: bitmask for enabled high thresholds
- * @mask_low: bitmask for enabled low thresholds
- * @thresh_high: high threshold values
- * @thresh_low: low threshold values
- */
-struct max1363_state {
- struct i2c_client *client;
- u8 setupbyte;
- u8 configbyte;
- const struct max1363_chip_info *chip_info;
- const struct max1363_mode *current_mode;
- u32 requestedmask;
- struct regulator *reg;
-
- /* Using monitor modes and buffer at the same time is
- currently not supported */
- bool monitor_on;
- unsigned int monitor_speed:3;
- u8 mask_high;
- u8 mask_low;
- /* 4x unipolar first then the fours bipolar ones */
- s16 thresh_high[8];
- s16 thresh_low[8];
-};
-
-const struct max1363_mode
-*max1363_match_mode(const unsigned long *mask,
- const struct max1363_chip_info *ci);
-
-int max1363_set_scan_mode(struct max1363_state *st);
-
-#ifdef CONFIG_MAX1363_RING_BUFFER
-int max1363_update_scan_mode(struct iio_dev *indio_dev,
- const unsigned long *scan_mask);
-int max1363_register_ring_funcs_and_init(struct iio_dev *indio_dev);
-void max1363_ring_cleanup(struct iio_dev *indio_dev);
-
-#else /* CONFIG_MAX1363_RING_BUFFER */
-int max1363_update_scan_mode(struct iio_dev *indio_dev,
- const long *scan_mask)
-{
- return 0;
-}
-
-static inline int
-max1363_register_ring_funcs_and_init(struct iio_dev *indio_dev)
-{
- return 0;
-}
-
-static inline void max1363_ring_cleanup(struct iio_dev *indio_dev)
-{
-}
-#endif /* CONFIG_MAX1363_RING_BUFFER */
-#endif /* _MAX1363_H_ */
diff --git a/drivers/staging/iio/adc/max1363_ring.c b/drivers/staging/iio/adc/max1363_ring.c
deleted file mode 100644
index 5f74f3b..0000000
--- a/drivers/staging/iio/adc/max1363_ring.c
+++ /dev/null
@@ -1,139 +0,0 @@
-/*
- * Copyright (C) 2008 Jonathan Cameron
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * max1363_ring.c
- */
-
-#include <linux/interrupt.h>
-#include <linux/slab.h>
-#include <linux/kernel.h>
-#include <linux/i2c.h>
-#include <linux/bitops.h>
-
-#include <linux/iio/iio.h>
-#include <linux/iio/buffer.h>
-#include "../ring_sw.h"
-#include <linux/iio/trigger_consumer.h>
-
-#include "max1363.h"
-
-int max1363_update_scan_mode(struct iio_dev *indio_dev,
- const unsigned long *scan_mask)
-{
- struct max1363_state *st = iio_priv(indio_dev);
-
- /*
- * Need to figure out the current mode based upon the requested
- * scan mask in iio_dev
- */
- st->current_mode = max1363_match_mode(scan_mask, st->chip_info);
- if (!st->current_mode)
- return -EINVAL;
- max1363_set_scan_mode(st);
- return 0;
-}
-
-static irqreturn_t max1363_trigger_handler(int irq, void *p)
-{
- struct iio_poll_func *pf = p;
- struct iio_dev *indio_dev = pf->indio_dev;
- struct max1363_state *st = iio_priv(indio_dev);
- s64 time_ns;
- __u8 *rxbuf;
- int b_sent;
- size_t d_size;
- unsigned long numvals = bitmap_weight(st->current_mode->modemask,
- MAX1363_MAX_CHANNELS);
-
- /* Ensure the timestamp is 8 byte aligned */
- if (st->chip_info->bits != 8)
- d_size = numvals*2;
- else
- d_size = numvals;
- if (indio_dev->scan_timestamp) {
- d_size += sizeof(s64);
- if (d_size % sizeof(s64))
- d_size += sizeof(s64) - (d_size % sizeof(s64));
- }
- /* Monitor mode prevents reading. Whilst not currently implemented
- * might as well have this test in here in the meantime as it does
- * no harm.
- */
- if (numvals == 0)
- goto done;
-
- rxbuf = kmalloc(d_size, GFP_KERNEL);
- if (rxbuf == NULL)
- goto done;
- if (st->chip_info->bits != 8)
- b_sent = i2c_master_recv(st->client, rxbuf, numvals*2);
- else
- b_sent = i2c_master_recv(st->client, rxbuf, numvals);
- if (b_sent < 0)
- goto done_free;
-
- time_ns = iio_get_time_ns();
-
- if (indio_dev->scan_timestamp)
- memcpy(rxbuf + d_size - sizeof(s64), &time_ns, sizeof(time_ns));
- iio_push_to_buffer(indio_dev->buffer, rxbuf);
-
-done_free:
- kfree(rxbuf);
-done:
- iio_trigger_notify_done(indio_dev->trig);
-
- return IRQ_HANDLED;
-}
-
-static const struct iio_buffer_setup_ops max1363_ring_setup_ops = {
- .postenable = &iio_triggered_buffer_postenable,
- .preenable = &iio_sw_buffer_preenable,
- .predisable = &iio_triggered_buffer_predisable,
-};
-
-int max1363_register_ring_funcs_and_init(struct iio_dev *indio_dev)
-{
- struct max1363_state *st = iio_priv(indio_dev);
- int ret = 0;
-
- indio_dev->buffer = iio_sw_rb_allocate(indio_dev);
- if (!indio_dev->buffer) {
- ret = -ENOMEM;
- goto error_ret;
- }
- indio_dev->pollfunc = iio_alloc_pollfunc(NULL,
- &max1363_trigger_handler,
- IRQF_ONESHOT,
- indio_dev,
- "%s_consumer%d",
- st->client->name,
- indio_dev->id);
- if (indio_dev->pollfunc == NULL) {
- ret = -ENOMEM;
- goto error_deallocate_sw_rb;
- }
- /* Ring buffer functions - here trigger setup related */
- indio_dev->setup_ops = &max1363_ring_setup_ops;
-
- /* Flag that polled ring buffering is possible */
- indio_dev->modes |= INDIO_BUFFER_TRIGGERED;
-
- return 0;
-
-error_deallocate_sw_rb:
- iio_sw_rb_free(indio_dev->buffer);
-error_ret:
- return ret;
-}
-
-void max1363_ring_cleanup(struct iio_dev *indio_dev)
-{
- /* ensure that the trigger has been detached */
- iio_dealloc_pollfunc(indio_dev->pollfunc);
- iio_sw_rb_free(indio_dev->buffer);
-}
diff --git a/drivers/staging/iio/adc/mxs-lradc.c b/drivers/staging/iio/adc/mxs-lradc.c
index ca7c1fa..fb31b45 100644
--- a/drivers/staging/iio/adc/mxs-lradc.c
+++ b/drivers/staging/iio/adc/mxs-lradc.c
@@ -237,7 +237,6 @@
struct iio_poll_func *pf = p;
struct iio_dev *iio = pf->indio_dev;
struct mxs_lradc *lradc = iio_priv(iio);
- struct iio_buffer *buffer = iio->buffer;
const uint32_t chan_value = LRADC_CH_ACCUMULATE |
((LRADC_DELAY_TIMER_LOOP - 1) << LRADC_CH_NUM_SAMPLES_OFFSET);
int i, j = 0;
@@ -256,7 +255,7 @@
*timestamp = pf->timestamp;
}
- iio_push_to_buffer(buffer, (u8 *)lradc->buffer);
+ iio_push_to_buffers(iio, (u8 *)lradc->buffer);
iio_trigger_notify_done(iio->trig);
@@ -351,7 +350,7 @@
writel(chan_value, lradc->base + LRADC_CH(ofs));
enable |= 1 << ofs;
ofs++;
- };
+ }
writel(LRADC_DELAY_TRIGGER_LRADCS_MASK | LRADC_DELAY_KICK,
lradc->base + LRADC_DELAY(0) + STMP_OFFSET_REG_CLR);
@@ -467,7 +466,7 @@
writel(0, lradc->base + LRADC_DELAY(i));
}
-static int __devinit mxs_lradc_probe(struct platform_device *pdev)
+static int mxs_lradc_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct mxs_lradc *lradc;
@@ -552,7 +551,7 @@
return ret;
}
-static int __devexit mxs_lradc_remove(struct platform_device *pdev)
+static int mxs_lradc_remove(struct platform_device *pdev)
{
struct iio_dev *iio = platform_get_drvdata(pdev);
struct mxs_lradc *lradc = iio_priv(iio);
@@ -580,7 +579,7 @@
.of_match_table = mxs_lradc_dt_ids,
},
.probe = mxs_lradc_probe,
- .remove = __devexit_p(mxs_lradc_remove),
+ .remove = mxs_lradc_remove,
};
module_platform_driver(mxs_lradc_driver);
diff --git a/drivers/staging/iio/adc/spear_adc.c b/drivers/staging/iio/adc/spear_adc.c
index 0b83e2e..13052ce 100644
--- a/drivers/staging/iio/adc/spear_adc.c
+++ b/drivers/staging/iio/adc/spear_adc.c
@@ -291,7 +291,7 @@
.driver_module = THIS_MODULE,
};
-static int __devinit spear_adc_probe(struct platform_device *pdev)
+static int spear_adc_probe(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
struct device *dev = &pdev->dev;
@@ -401,7 +401,7 @@
return ret;
}
-static int __devexit spear_adc_remove(struct platform_device *pdev)
+static int spear_adc_remove(struct platform_device *pdev)
{
struct iio_dev *iodev = platform_get_drvdata(pdev);
struct spear_adc_info *info = iio_priv(iodev);
@@ -424,7 +424,7 @@
static struct platform_driver spear_adc_driver = {
.probe = spear_adc_probe,
- .remove = __devexit_p(spear_adc_remove),
+ .remove = spear_adc_remove,
.driver = {
.name = MOD_NAME,
.owner = THIS_MODULE,
diff --git a/drivers/staging/iio/addac/adt7316-i2c.c b/drivers/staging/iio/addac/adt7316-i2c.c
index 9e128dd..ce7d91c 100644
--- a/drivers/staging/iio/addac/adt7316-i2c.c
+++ b/drivers/staging/iio/addac/adt7316-i2c.c
@@ -92,7 +92,7 @@
* device probe and remove
*/
-static int __devinit adt7316_i2c_probe(struct i2c_client *client,
+static int adt7316_i2c_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct adt7316_bus bus = {
@@ -108,7 +108,7 @@
return adt7316_probe(&client->dev, &bus, id->name);
}
-static int __devexit adt7316_i2c_remove(struct i2c_client *client)
+static int adt7316_i2c_remove(struct i2c_client *client)
{
return adt7316_remove(&client->dev);
}
@@ -132,7 +132,7 @@
.owner = THIS_MODULE,
},
.probe = adt7316_i2c_probe,
- .remove = __devexit_p(adt7316_i2c_remove),
+ .remove = adt7316_i2c_remove,
.id_table = adt7316_i2c_id,
};
module_i2c_driver(adt7316_driver);
diff --git a/drivers/staging/iio/addac/adt7316-spi.c b/drivers/staging/iio/addac/adt7316-spi.c
index 985f7d8..0db8ef5 100644
--- a/drivers/staging/iio/addac/adt7316-spi.c
+++ b/drivers/staging/iio/addac/adt7316-spi.c
@@ -89,7 +89,7 @@
* device probe and remove
*/
-static int __devinit adt7316_spi_probe(struct spi_device *spi_dev)
+static int adt7316_spi_probe(struct spi_device *spi_dev)
{
struct adt7316_bus bus = {
.client = spi_dev,
@@ -116,7 +116,7 @@
return adt7316_probe(&spi_dev->dev, &bus, spi_dev->modalias);
}
-static int __devexit adt7316_spi_remove(struct spi_device *spi_dev)
+static int adt7316_spi_remove(struct spi_device *spi_dev)
{
return adt7316_remove(&spi_dev->dev);
}
@@ -140,7 +140,7 @@
.owner = THIS_MODULE,
},
.probe = adt7316_spi_probe,
- .remove = __devexit_p(adt7316_spi_remove),
+ .remove = adt7316_spi_remove,
.id_table = adt7316_spi_id,
};
module_spi_driver(adt7316_driver);
diff --git a/drivers/staging/iio/addac/adt7316.c b/drivers/staging/iio/addac/adt7316.c
index 8fb014a..0b431bc 100644
--- a/drivers/staging/iio/addac/adt7316.c
+++ b/drivers/staging/iio/addac/adt7316.c
@@ -2125,7 +2125,7 @@
/*
* device probe and remove
*/
-int __devinit adt7316_probe(struct device *dev, struct adt7316_bus *bus,
+int adt7316_probe(struct device *dev, struct adt7316_bus *bus,
const char *name)
{
struct adt7316_chip_info *chip;
@@ -2216,7 +2216,7 @@
}
EXPORT_SYMBOL(adt7316_probe);
-int __devexit adt7316_remove(struct device *dev)
+int adt7316_remove(struct device *dev)
{
struct iio_dev *indio_dev = dev_get_drvdata(dev);
struct adt7316_chip_info *chip = iio_priv(indio_dev);
diff --git a/drivers/staging/iio/cdc/ad7150.c b/drivers/staging/iio/cdc/ad7150.c
index 6a40414..3c608c1 100644
--- a/drivers/staging/iio/cdc/ad7150.c
+++ b/drivers/staging/iio/cdc/ad7150.c
@@ -156,7 +156,7 @@
return !adaptive && (threshtype == 0x1);
else
return !adaptive && (threshtype == 0x0);
- };
+ }
return -EINVAL;
}
@@ -194,7 +194,7 @@
break;
default:
return -EINVAL;
- };
+ }
ret = i2c_smbus_write_byte_data(chip->client,
ad7150_addresses[chan][4],
sens);
@@ -257,7 +257,7 @@
default:
ret = -EINVAL;
goto error_ret;
- };
+ }
cfg |= (!adaptive << 7) | (thresh_type << 5);
@@ -327,7 +327,7 @@
default:
ret = -EINVAL;
goto error_ret;
- };
+ }
/* write back if active */
ret = ad7150_write_event_params(indio_dev, event_code);
@@ -360,7 +360,7 @@
break;
default:
return -EINVAL;
- };
+ }
return sprintf(buf, "%d\n", value);
}
@@ -394,7 +394,7 @@
default:
ret = -EINVAL;
goto error_ret;
- };
+ }
ret = ad7150_write_event_params(indio_dev, this_attr->address);
error_ret:
@@ -551,7 +551,7 @@
* device probe and remove
*/
-static int __devinit ad7150_probe(struct i2c_client *client,
+static int ad7150_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
int ret;
@@ -628,7 +628,7 @@
return ret;
}
-static int __devexit ad7150_remove(struct i2c_client *client)
+static int ad7150_remove(struct i2c_client *client)
{
struct iio_dev *indio_dev = i2c_get_clientdata(client);
@@ -658,7 +658,7 @@
.name = "ad7150",
},
.probe = ad7150_probe,
- .remove = __devexit_p(ad7150_remove),
+ .remove = ad7150_remove,
.id_table = ad7150_id,
};
module_i2c_driver(ad7150_driver);
diff --git a/drivers/staging/iio/cdc/ad7152.c b/drivers/staging/iio/cdc/ad7152.c
index 98c3015..3c92ba3 100644
--- a/drivers/staging/iio/cdc/ad7152.c
+++ b/drivers/staging/iio/cdc/ad7152.c
@@ -405,7 +405,7 @@
break;
default:
ret = -EINVAL;
- };
+ }
out:
mutex_unlock(&indio_dev->mlock);
return ret;
@@ -474,7 +474,7 @@
* device probe and remove
*/
-static int __devinit ad7152_probe(struct i2c_client *client,
+static int ad7152_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
int ret = 0;
@@ -518,7 +518,7 @@
return ret;
}
-static int __devexit ad7152_remove(struct i2c_client *client)
+static int ad7152_remove(struct i2c_client *client)
{
struct iio_dev *indio_dev = i2c_get_clientdata(client);
@@ -541,7 +541,7 @@
.name = KBUILD_MODNAME,
},
.probe = ad7152_probe,
- .remove = __devexit_p(ad7152_remove),
+ .remove = ad7152_remove,
.id_table = ad7152_id,
};
module_i2c_driver(ad7152_driver);
diff --git a/drivers/staging/iio/cdc/ad7746.c b/drivers/staging/iio/cdc/ad7746.c
index 754e11e..466b82e 100644
--- a/drivers/staging/iio/cdc/ad7746.c
+++ b/drivers/staging/iio/cdc/ad7746.c
@@ -677,7 +677,7 @@
break;
default:
ret = -EINVAL;
- };
+ }
out:
mutex_unlock(&indio_dev->mlock);
return ret;
@@ -694,7 +694,7 @@
* device probe and remove
*/
-static int __devinit ad7746_probe(struct i2c_client *client,
+static int ad7746_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct ad7746_platform_data *pdata = client->dev.platform_data;
@@ -768,7 +768,7 @@
return ret;
}
-static int __devexit ad7746_remove(struct i2c_client *client)
+static int ad7746_remove(struct i2c_client *client)
{
struct iio_dev *indio_dev = i2c_get_clientdata(client);
@@ -792,7 +792,7 @@
.name = KBUILD_MODNAME,
},
.probe = ad7746_probe,
- .remove = __devexit_p(ad7746_remove),
+ .remove = ad7746_remove,
.id_table = ad7746_id,
};
module_i2c_driver(ad7746_driver);
diff --git a/drivers/staging/iio/frequency/ad5930.c b/drivers/staging/iio/frequency/ad5930.c
index 2d541d0..23777be 100644
--- a/drivers/staging/iio/frequency/ad5930.c
+++ b/drivers/staging/iio/frequency/ad5930.c
@@ -91,7 +91,7 @@
.driver_module = THIS_MODULE,
};
-static int __devinit ad5930_probe(struct spi_device *spi)
+static int ad5930_probe(struct spi_device *spi)
{
struct ad5930_state *st;
struct iio_dev *idev;
@@ -127,7 +127,7 @@
return ret;
}
-static int __devexit ad5930_remove(struct spi_device *spi)
+static int ad5930_remove(struct spi_device *spi)
{
iio_device_unregister(spi_get_drvdata(spi));
iio_device_free(spi_get_drvdata(spi));
@@ -141,7 +141,7 @@
.owner = THIS_MODULE,
},
.probe = ad5930_probe,
- .remove = __devexit_p(ad5930_remove),
+ .remove = ad5930_remove,
};
module_spi_driver(ad5930_driver);
diff --git a/drivers/staging/iio/frequency/ad9832.c b/drivers/staging/iio/frequency/ad9832.c
index fed3940..4e18380 100644
--- a/drivers/staging/iio/frequency/ad9832.c
+++ b/drivers/staging/iio/frequency/ad9832.c
@@ -201,7 +201,7 @@
.driver_module = THIS_MODULE,
};
-static int __devinit ad9832_probe(struct spi_device *spi)
+static int ad9832_probe(struct spi_device *spi)
{
struct ad9832_platform_data *pdata = spi->dev.platform_data;
struct iio_dev *indio_dev;
@@ -324,7 +324,7 @@
return ret;
}
-static int __devexit ad9832_remove(struct spi_device *spi)
+static int ad9832_remove(struct spi_device *spi)
{
struct iio_dev *indio_dev = spi_get_drvdata(spi);
struct ad9832_state *st = iio_priv(indio_dev);
@@ -352,7 +352,7 @@
.owner = THIS_MODULE,
},
.probe = ad9832_probe,
- .remove = __devexit_p(ad9832_remove),
+ .remove = ad9832_remove,
.id_table = ad9832_id,
};
module_spi_driver(ad9832_driver);
diff --git a/drivers/staging/iio/frequency/ad9834.c b/drivers/staging/iio/frequency/ad9834.c
index 1b2dc74..5cba3c0 100644
--- a/drivers/staging/iio/frequency/ad9834.c
+++ b/drivers/staging/iio/frequency/ad9834.c
@@ -314,7 +314,7 @@
.driver_module = THIS_MODULE,
};
-static int __devinit ad9834_probe(struct spi_device *spi)
+static int ad9834_probe(struct spi_device *spi)
{
struct ad9834_platform_data *pdata = spi->dev.platform_data;
struct ad9834_state *st;
@@ -424,7 +424,7 @@
return ret;
}
-static int __devexit ad9834_remove(struct spi_device *spi)
+static int ad9834_remove(struct spi_device *spi)
{
struct iio_dev *indio_dev = spi_get_drvdata(spi);
struct ad9834_state *st = iio_priv(indio_dev);
@@ -454,7 +454,7 @@
.owner = THIS_MODULE,
},
.probe = ad9834_probe,
- .remove = __devexit_p(ad9834_remove),
+ .remove = ad9834_remove,
.id_table = ad9834_id,
};
module_spi_driver(ad9834_driver);
diff --git a/drivers/staging/iio/frequency/ad9850.c b/drivers/staging/iio/frequency/ad9850.c
index 74abee0..104f7a4 100644
--- a/drivers/staging/iio/frequency/ad9850.c
+++ b/drivers/staging/iio/frequency/ad9850.c
@@ -77,7 +77,7 @@
.driver_module = THIS_MODULE,
};
-static int __devinit ad9850_probe(struct spi_device *spi)
+static int ad9850_probe(struct spi_device *spi)
{
struct ad9850_state *st;
struct iio_dev *idev;
@@ -113,7 +113,7 @@
return ret;
}
-static int __devexit ad9850_remove(struct spi_device *spi)
+static int ad9850_remove(struct spi_device *spi)
{
iio_device_unregister(spi_get_drvdata(spi));
iio_device_free(spi_get_drvdata(spi));
@@ -127,7 +127,7 @@
.owner = THIS_MODULE,
},
.probe = ad9850_probe,
- .remove = __devexit_p(ad9850_remove),
+ .remove = ad9850_remove,
};
module_spi_driver(ad9850_driver);
diff --git a/drivers/staging/iio/frequency/ad9852.c b/drivers/staging/iio/frequency/ad9852.c
index fd9d14a..17ac825 100644
--- a/drivers/staging/iio/frequency/ad9852.c
+++ b/drivers/staging/iio/frequency/ad9852.c
@@ -226,7 +226,7 @@
.driver_module = THIS_MODULE,
};
-static int __devinit ad9852_probe(struct spi_device *spi)
+static int ad9852_probe(struct spi_device *spi)
{
struct ad9852_state *st;
struct iio_dev *idev;
@@ -264,7 +264,7 @@
return ret;
}
-static int __devexit ad9852_remove(struct spi_device *spi)
+static int ad9852_remove(struct spi_device *spi)
{
iio_device_unregister(spi_get_drvdata(spi));
iio_device_free(spi_get_drvdata(spi));
@@ -278,7 +278,7 @@
.owner = THIS_MODULE,
},
.probe = ad9852_probe,
- .remove = __devexit_p(ad9852_remove),
+ .remove = ad9852_remove,
};
module_spi_driver(ad9852_driver);
diff --git a/drivers/staging/iio/frequency/ad9910.c b/drivers/staging/iio/frequency/ad9910.c
index 5a7ba30..e48f874 100644
--- a/drivers/staging/iio/frequency/ad9910.c
+++ b/drivers/staging/iio/frequency/ad9910.c
@@ -361,7 +361,7 @@
.driver_module = THIS_MODULE,
};
-static int __devinit ad9910_probe(struct spi_device *spi)
+static int ad9910_probe(struct spi_device *spi)
{
struct ad9910_state *st;
struct iio_dev *idev;
@@ -397,7 +397,7 @@
return ret;
}
-static int __devexit ad9910_remove(struct spi_device *spi)
+static int ad9910_remove(struct spi_device *spi)
{
iio_device_unregister(spi_get_drvdata(spi));
iio_device_free(spi_get_drvdata(spi));
@@ -411,7 +411,7 @@
.owner = THIS_MODULE,
},
.probe = ad9910_probe,
- .remove = __devexit_p(ad9910_remove),
+ .remove = ad9910_remove,
};
module_spi_driver(ad9910_driver);
diff --git a/drivers/staging/iio/frequency/ad9951.c b/drivers/staging/iio/frequency/ad9951.c
index ba6f49f..8234e3c 100644
--- a/drivers/staging/iio/frequency/ad9951.c
+++ b/drivers/staging/iio/frequency/ad9951.c
@@ -170,7 +170,7 @@
.driver_module = THIS_MODULE,
};
-static int __devinit ad9951_probe(struct spi_device *spi)
+static int ad9951_probe(struct spi_device *spi)
{
struct ad9951_state *st;
struct iio_dev *idev;
@@ -208,7 +208,7 @@
return ret;
}
-static int __devexit ad9951_remove(struct spi_device *spi)
+static int ad9951_remove(struct spi_device *spi)
{
iio_device_unregister(spi_get_drvdata(spi));
iio_device_free(spi_get_drvdata(spi));
@@ -222,7 +222,7 @@
.owner = THIS_MODULE,
},
.probe = ad9951_probe,
- .remove = __devexit_p(ad9951_remove),
+ .remove = ad9951_remove,
};
module_spi_driver(ad9951_driver);
diff --git a/drivers/staging/iio/gyro/Makefile b/drivers/staging/iio/gyro/Makefile
index 9ba5ec1..1303569 100644
--- a/drivers/staging/iio/gyro/Makefile
+++ b/drivers/staging/iio/gyro/Makefile
@@ -12,7 +12,6 @@
obj-$(CONFIG_ADIS16130) += adis16130.o
adis16260-y := adis16260_core.o
-adis16260-$(CONFIG_IIO_BUFFER) += adis16260_ring.o adis16260_trigger.o
obj-$(CONFIG_ADIS16260) += adis16260.o
adis16251-y := adis16251_core.o
diff --git a/drivers/staging/iio/gyro/adis16060_core.c b/drivers/staging/iio/gyro/adis16060_core.c
index 87151a7..687c151 100644
--- a/drivers/staging/iio/gyro/adis16060_core.c
+++ b/drivers/staging/iio/gyro/adis16060_core.c
@@ -145,7 +145,7 @@
}
};
-static int __devinit adis16060_r_probe(struct spi_device *spi)
+static int adis16060_r_probe(struct spi_device *spi)
{
int ret;
struct adis16060_state *st;
@@ -184,7 +184,7 @@
}
/* fixme, confirm ordering in this function */
-static int __devexit adis16060_r_remove(struct spi_device *spi)
+static int adis16060_r_remove(struct spi_device *spi)
{
iio_device_unregister(spi_get_drvdata(spi));
iio_device_free(spi_get_drvdata(spi));
@@ -192,7 +192,7 @@
return 0;
}
-static int __devinit adis16060_w_probe(struct spi_device *spi)
+static int adis16060_w_probe(struct spi_device *spi)
{
int ret;
struct iio_dev *indio_dev = adis16060_iio_dev;
@@ -210,7 +210,7 @@
return ret;
}
-static int __devexit adis16060_w_remove(struct spi_device *spi)
+static int adis16060_w_remove(struct spi_device *spi)
{
return 0;
}
@@ -221,7 +221,7 @@
.owner = THIS_MODULE,
},
.probe = adis16060_r_probe,
- .remove = __devexit_p(adis16060_r_remove),
+ .remove = adis16060_r_remove,
};
static struct spi_driver adis16060_w_driver = {
@@ -230,7 +230,7 @@
.owner = THIS_MODULE,
},
.probe = adis16060_w_probe,
- .remove = __devexit_p(adis16060_w_remove),
+ .remove = adis16060_w_remove,
};
static __init int adis16060_init(void)
diff --git a/drivers/staging/iio/gyro/adis16080_core.c b/drivers/staging/iio/gyro/adis16080_core.c
index a739025..3525a68 100644
--- a/drivers/staging/iio/gyro/adis16080_core.c
+++ b/drivers/staging/iio/gyro/adis16080_core.c
@@ -138,7 +138,7 @@
.driver_module = THIS_MODULE,
};
-static int __devinit adis16080_probe(struct spi_device *spi)
+static int adis16080_probe(struct spi_device *spi)
{
int ret;
struct adis16080_state *st;
@@ -177,7 +177,7 @@
}
/* fixme, confirm ordering in this function */
-static int __devexit adis16080_remove(struct spi_device *spi)
+static int adis16080_remove(struct spi_device *spi)
{
iio_device_unregister(spi_get_drvdata(spi));
iio_device_free(spi_get_drvdata(spi));
@@ -191,7 +191,7 @@
.owner = THIS_MODULE,
},
.probe = adis16080_probe,
- .remove = __devexit_p(adis16080_remove),
+ .remove = adis16080_remove,
};
module_spi_driver(adis16080_driver);
diff --git a/drivers/staging/iio/gyro/adis16130_core.c b/drivers/staging/iio/gyro/adis16130_core.c
index fbf96b0..835801e 100644
--- a/drivers/staging/iio/gyro/adis16130_core.c
+++ b/drivers/staging/iio/gyro/adis16130_core.c
@@ -116,7 +116,7 @@
.driver_module = THIS_MODULE,
};
-static int __devinit adis16130_probe(struct spi_device *spi)
+static int adis16130_probe(struct spi_device *spi)
{
int ret;
struct adis16130_state *st;
@@ -154,7 +154,7 @@
}
/* fixme, confirm ordering in this function */
-static int __devexit adis16130_remove(struct spi_device *spi)
+static int adis16130_remove(struct spi_device *spi)
{
iio_device_unregister(spi_get_drvdata(spi));
iio_device_free(spi_get_drvdata(spi));
@@ -168,7 +168,7 @@
.owner = THIS_MODULE,
},
.probe = adis16130_probe,
- .remove = __devexit_p(adis16130_remove),
+ .remove = adis16130_remove,
};
module_spi_driver(adis16130_driver);
diff --git a/drivers/staging/iio/gyro/adis16260.h b/drivers/staging/iio/gyro/adis16260.h
index 4c4b251..df3c0b7 100644
--- a/drivers/staging/iio/gyro/adis16260.h
+++ b/drivers/staging/iio/gyro/adis16260.h
@@ -1,12 +1,11 @@
#ifndef SPI_ADIS16260_H_
#define SPI_ADIS16260_H_
+
#include "adis16260_platform_data.h"
+#include <linux/iio/imu/adis.h>
#define ADIS16260_STARTUP_DELAY 220 /* ms */
-#define ADIS16260_READ_REG(a) a
-#define ADIS16260_WRITE_REG(a) ((a) | 0x80)
-
#define ADIS16260_FLASH_CNT 0x00 /* Flash memory write count */
#define ADIS16260_SUPPLY_OUT 0x02 /* Power supply measurement */
#define ADIS16260_GYRO_OUT 0x04 /* X-axis gyroscope output */
@@ -34,8 +33,6 @@
* convert to decimal = 16,265/16,260 */
#define ADIS16260_SERIAL_NUM 0x58 /* Serial number */
-#define ADIS16260_OUTPUTS 5
-
#define ADIS16260_ERROR_ACTIVE (1<<14)
#define ADIS16260_NEW_DATA (1<<15)
@@ -60,13 +57,13 @@
/* DIAG_STAT */
#define ADIS16260_DIAG_STAT_ALARM2 (1<<9)
#define ADIS16260_DIAG_STAT_ALARM1 (1<<8)
-#define ADIS16260_DIAG_STAT_FLASH_CHK (1<<6)
-#define ADIS16260_DIAG_STAT_SELF_TEST (1<<5)
-#define ADIS16260_DIAG_STAT_OVERFLOW (1<<4)
-#define ADIS16260_DIAG_STAT_SPI_FAIL (1<<3)
-#define ADIS16260_DIAG_STAT_FLASH_UPT (1<<2)
-#define ADIS16260_DIAG_STAT_POWER_HIGH (1<<1)
-#define ADIS16260_DIAG_STAT_POWER_LOW (1<<0)
+#define ADIS16260_DIAG_STAT_FLASH_CHK_BIT 6
+#define ADIS16260_DIAG_STAT_SELF_TEST_BIT 5
+#define ADIS16260_DIAG_STAT_OVERFLOW_BIT 4
+#define ADIS16260_DIAG_STAT_SPI_FAIL_BIT 3
+#define ADIS16260_DIAG_STAT_FLASH_UPT_BIT 2
+#define ADIS16260_DIAG_STAT_POWER_HIGH_BIT 1
+#define ADIS16260_DIAG_STAT_POWER_LOW_BIT 0
/* GLOB_CMD */
#define ADIS16260_GLOB_CMD_SW_RESET (1<<7)
@@ -75,82 +72,27 @@
#define ADIS16260_GLOB_CMD_FAC_CALIB (1<<1)
#define ADIS16260_GLOB_CMD_AUTO_NULL (1<<0)
-#define ADIS16260_MAX_TX 24
-#define ADIS16260_MAX_RX 24
-
#define ADIS16260_SPI_SLOW (u32)(300 * 1000)
#define ADIS16260_SPI_BURST (u32)(1000 * 1000)
#define ADIS16260_SPI_FAST (u32)(2000 * 1000)
/**
* struct adis16260_state - device instance specific data
- * @us: actual spi_device
- * @trig: data ready trigger registered with iio
- * @buf_lock: mutex to protect tx and rx
* @negate: negate the scale parameter
- * @tx: transmit buffer
- * @rx: receive buffer
**/
struct adis16260_state {
- struct spi_device *us;
- struct iio_trigger *trig;
- struct mutex buf_lock;
- unsigned negate:1;
- u8 tx[ADIS16260_MAX_TX] ____cacheline_aligned;
- u8 rx[ADIS16260_MAX_RX];
+ unsigned negate:1;
+ struct adis adis;
};
-int adis16260_set_irq(struct iio_dev *indio_dev, bool enable);
-
/* At the moment triggers are only used for ring buffer
* filling. This may change!
*/
-#define ADIS16260_SCAN_SUPPLY 0
-#define ADIS16260_SCAN_GYRO 1
+#define ADIS16260_SCAN_GYRO 0
+#define ADIS16260_SCAN_SUPPLY 1
#define ADIS16260_SCAN_AUX_ADC 2
#define ADIS16260_SCAN_TEMP 3
#define ADIS16260_SCAN_ANGL 4
-#ifdef CONFIG_IIO_BUFFER
-void adis16260_remove_trigger(struct iio_dev *indio_dev);
-int adis16260_probe_trigger(struct iio_dev *indio_dev);
-
-ssize_t adis16260_read_data_from_ring(struct device *dev,
- struct device_attribute *attr,
- char *buf);
-
-
-int adis16260_configure_ring(struct iio_dev *indio_dev);
-void adis16260_unconfigure_ring(struct iio_dev *indio_dev);
-
-#else /* CONFIG_IIO_BUFFER */
-
-static inline void adis16260_remove_trigger(struct iio_dev *indio_dev)
-{
-}
-
-static inline int adis16260_probe_trigger(struct iio_dev *indio_dev)
-{
- return 0;
-}
-
-static inline ssize_t
-adis16260_read_data_from_ring(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- return 0;
-}
-
-static int adis16260_configure_ring(struct iio_dev *indio_dev)
-{
- return 0;
-}
-
-static inline void adis16260_unconfigure_ring(struct iio_dev *indio_dev)
-{
-}
-
-#endif /* CONFIG_IIO_BUFFER */
#endif /* SPI_ADIS16260_H_ */
diff --git a/drivers/staging/iio/gyro/adis16260_core.c b/drivers/staging/iio/gyro/adis16260_core.c
index aa964a2..6e80b8c 100644
--- a/drivers/staging/iio/gyro/adis16260_core.c
+++ b/drivers/staging/iio/gyro/adis16260_core.c
@@ -24,134 +24,13 @@
#include "adis16260.h"
-#define DRIVER_NAME "adis16260"
-
-static int adis16260_check_status(struct iio_dev *indio_dev);
-
-/**
- * adis16260_spi_write_reg_8() - write single byte to a register
- * @indio_dev: iio_dev for the device
- * @reg_address: the address of the register to be written
- * @val: the value to write
- **/
-static int adis16260_spi_write_reg_8(struct iio_dev *indio_dev,
- u8 reg_address,
- u8 val)
-{
- int ret;
- struct adis16260_state *st = iio_priv(indio_dev);
-
- mutex_lock(&st->buf_lock);
- st->tx[0] = ADIS16260_WRITE_REG(reg_address);
- st->tx[1] = val;
-
- ret = spi_write(st->us, st->tx, 2);
- mutex_unlock(&st->buf_lock);
-
- return ret;
-}
-
-/**
- * adis16260_spi_write_reg_16() - write 2 bytes to a pair of registers
- * @indio_dev: iio_dev for the device
- * @reg_address: the address of the lower of the two registers. Second register
- * is assumed to have address one greater.
- * @val: value to be written
- **/
-static int adis16260_spi_write_reg_16(struct iio_dev *indio_dev,
- u8 lower_reg_address,
- u16 value)
-{
- int ret;
- struct spi_message msg;
- struct adis16260_state *st = iio_priv(indio_dev);
- struct spi_transfer xfers[] = {
- {
- .tx_buf = st->tx,
- .bits_per_word = 8,
- .len = 2,
- .cs_change = 1,
- .delay_usecs = 20,
- }, {
- .tx_buf = st->tx + 2,
- .bits_per_word = 8,
- .len = 2,
- .delay_usecs = 20,
- },
- };
-
- mutex_lock(&st->buf_lock);
- st->tx[0] = ADIS16260_WRITE_REG(lower_reg_address);
- st->tx[1] = value & 0xFF;
- st->tx[2] = ADIS16260_WRITE_REG(lower_reg_address + 1);
- st->tx[3] = (value >> 8) & 0xFF;
-
- spi_message_init(&msg);
- spi_message_add_tail(&xfers[0], &msg);
- spi_message_add_tail(&xfers[1], &msg);
- ret = spi_sync(st->us, &msg);
- mutex_unlock(&st->buf_lock);
-
- return ret;
-}
-
-/**
- * adis16260_spi_read_reg_16() - read 2 bytes from a 16-bit register
- * @indio_dev: iio_dev for the device
- * @reg_address: the address of the lower of the two registers. Second register
- * is assumed to have address one greater.
- * @val: somewhere to pass back the value read
- **/
-static int adis16260_spi_read_reg_16(struct iio_dev *indio_dev,
- u8 lower_reg_address,
- u16 *val)
-{
- struct spi_message msg;
- struct adis16260_state *st = iio_priv(indio_dev);
- int ret;
- struct spi_transfer xfers[] = {
- {
- .tx_buf = st->tx,
- .bits_per_word = 8,
- .len = 2,
- .cs_change = 1,
- .delay_usecs = 30,
- }, {
- .rx_buf = st->rx,
- .bits_per_word = 8,
- .len = 2,
- .delay_usecs = 30,
- },
- };
-
- mutex_lock(&st->buf_lock);
- st->tx[0] = ADIS16260_READ_REG(lower_reg_address);
- st->tx[1] = 0;
-
- spi_message_init(&msg);
- spi_message_add_tail(&xfers[0], &msg);
- spi_message_add_tail(&xfers[1], &msg);
- ret = spi_sync(st->us, &msg);
- if (ret) {
- dev_err(&st->us->dev,
- "problem when reading 16 bit register 0x%02X",
- lower_reg_address);
- goto error_ret;
- }
- *val = (st->rx[0] << 8) | st->rx[1];
-
-error_ret:
- mutex_unlock(&st->buf_lock);
- return ret;
-}
-
static ssize_t adis16260_read_frequency_available(struct device *dev,
struct device_attribute *attr,
char *buf)
{
struct iio_dev *indio_dev = dev_to_iio_dev(dev);
struct adis16260_state *st = iio_priv(indio_dev);
- if (spi_get_device_id(st->us)->driver_data)
+ if (spi_get_device_id(st->adis.spi)->driver_data)
return sprintf(buf, "%s\n", "0.129 ~ 256");
else
return sprintf(buf, "%s\n", "256 2048");
@@ -166,13 +45,11 @@
int ret, len = 0;
u16 t;
int sps;
- ret = adis16260_spi_read_reg_16(indio_dev,
- ADIS16260_SMPL_PRD,
- &t);
+ ret = adis_read_reg_16(&st->adis, ADIS16260_SMPL_PRD, &t);
if (ret)
return ret;
- if (spi_get_device_id(st->us)->driver_data) /* If an adis16251 */
+ if (spi_get_device_id(st->adis.spi)->driver_data) /* If an adis16251 */
sps = (t & ADIS16260_SMPL_PRD_TIME_BASE) ? 8 : 256;
else
sps = (t & ADIS16260_SMPL_PRD_TIME_BASE) ? 66 : 2048;
@@ -199,7 +76,7 @@
return -EINVAL;
mutex_lock(&indio_dev->mlock);
- if (spi_get_device_id(st->us)) {
+ if (spi_get_device_id(st->adis.spi)->driver_data) {
t = (256 / val);
if (t > 0)
t--;
@@ -211,10 +88,10 @@
t &= ADIS16260_SMPL_PRD_DIV_MASK;
}
if ((t & ADIS16260_SMPL_PRD_DIV_MASK) >= 0x0A)
- st->us->max_speed_hz = ADIS16260_SPI_SLOW;
+ st->adis.spi->max_speed_hz = ADIS16260_SPI_SLOW;
else
- st->us->max_speed_hz = ADIS16260_SPI_FAST;
- ret = adis16260_spi_write_reg_8(indio_dev,
+ st->adis.spi->max_speed_hz = ADIS16260_SPI_FAST;
+ ret = adis_write_reg_8(&st->adis,
ADIS16260_SMPL_PRD,
t);
@@ -223,140 +100,20 @@
return ret ? ret : len;
}
-static int adis16260_reset(struct iio_dev *indio_dev)
-{
- int ret;
- ret = adis16260_spi_write_reg_8(indio_dev,
- ADIS16260_GLOB_CMD,
- ADIS16260_GLOB_CMD_SW_RESET);
- if (ret)
- dev_err(&indio_dev->dev, "problem resetting device");
-
- return ret;
-}
-
-int adis16260_set_irq(struct iio_dev *indio_dev, bool enable)
-{
- int ret;
- u16 msc;
- ret = adis16260_spi_read_reg_16(indio_dev, ADIS16260_MSC_CTRL, &msc);
- if (ret)
- goto error_ret;
-
- msc |= ADIS16260_MSC_CTRL_DATA_RDY_POL_HIGH;
- if (enable)
- msc |= ADIS16260_MSC_CTRL_DATA_RDY_EN;
- else
- msc &= ~ADIS16260_MSC_CTRL_DATA_RDY_EN;
-
- ret = adis16260_spi_write_reg_16(indio_dev, ADIS16260_MSC_CTRL, msc);
- if (ret)
- goto error_ret;
-
-error_ret:
- return ret;
-}
-
/* Power down the device */
static int adis16260_stop_device(struct iio_dev *indio_dev)
{
+ struct adis16260_state *st = iio_priv(indio_dev);
int ret;
u16 val = ADIS16260_SLP_CNT_POWER_OFF;
- ret = adis16260_spi_write_reg_16(indio_dev, ADIS16260_SLP_CNT, val);
+ ret = adis_write_reg_16(&st->adis, ADIS16260_SLP_CNT, val);
if (ret)
dev_err(&indio_dev->dev, "problem with turning device off: SLP_CNT");
return ret;
}
-static int adis16260_self_test(struct iio_dev *indio_dev)
-{
- int ret;
- ret = adis16260_spi_write_reg_16(indio_dev,
- ADIS16260_MSC_CTRL,
- ADIS16260_MSC_CTRL_MEM_TEST);
- if (ret) {
- dev_err(&indio_dev->dev, "problem starting self test");
- goto err_ret;
- }
-
- adis16260_check_status(indio_dev);
-
-err_ret:
- return ret;
-}
-
-static int adis16260_check_status(struct iio_dev *indio_dev)
-{
- u16 status;
- int ret;
- struct device *dev = &indio_dev->dev;
-
- ret = adis16260_spi_read_reg_16(indio_dev,
- ADIS16260_DIAG_STAT,
- &status);
-
- if (ret < 0) {
- dev_err(dev, "Reading status failed\n");
- goto error_ret;
- }
- ret = status & 0x7F;
- if (status & ADIS16260_DIAG_STAT_FLASH_CHK)
- dev_err(dev, "Flash checksum error\n");
- if (status & ADIS16260_DIAG_STAT_SELF_TEST)
- dev_err(dev, "Self test error\n");
- if (status & ADIS16260_DIAG_STAT_OVERFLOW)
- dev_err(dev, "Sensor overrange\n");
- if (status & ADIS16260_DIAG_STAT_SPI_FAIL)
- dev_err(dev, "SPI failure\n");
- if (status & ADIS16260_DIAG_STAT_FLASH_UPT)
- dev_err(dev, "Flash update failed\n");
- if (status & ADIS16260_DIAG_STAT_POWER_HIGH)
- dev_err(dev, "Power supply above 5.25V\n");
- if (status & ADIS16260_DIAG_STAT_POWER_LOW)
- dev_err(dev, "Power supply below 4.75V\n");
-
-error_ret:
- return ret;
-}
-
-static int adis16260_initial_setup(struct iio_dev *indio_dev)
-{
- int ret;
- struct device *dev = &indio_dev->dev;
-
- /* Disable IRQ */
- ret = adis16260_set_irq(indio_dev, false);
- if (ret) {
- dev_err(dev, "disable irq failed");
- goto err_ret;
- }
-
- /* Do self test */
- ret = adis16260_self_test(indio_dev);
- if (ret) {
- dev_err(dev, "self test failure");
- goto err_ret;
- }
-
- /* Read status register to check the result */
- ret = adis16260_check_status(indio_dev);
- if (ret) {
- adis16260_reset(indio_dev);
- dev_err(dev, "device not playing ball -> reset");
- msleep(ADIS16260_STARTUP_DELAY);
- ret = adis16260_check_status(indio_dev);
- if (ret) {
- dev_err(dev, "giving up");
- goto err_ret;
- }
- }
-
-err_ret:
- return ret;
-}
-
static IIO_DEV_ATTR_SAMP_FREQ(S_IWUSR | S_IRUGO,
adis16260_read_frequency,
adis16260_write_frequency);
@@ -364,100 +121,26 @@
static IIO_DEVICE_ATTR(sampling_frequency_available,
S_IRUGO, adis16260_read_frequency_available, NULL, 0);
-enum adis16260_channel {
- gyro,
- temp,
- in_supply,
- in_aux,
- angle,
-};
#define ADIS16260_GYRO_CHANNEL_SET(axis, mod) \
- struct iio_chan_spec adis16260_channels_##axis[] = { \
- { \
- .type = IIO_ANGL_VEL, \
- .modified = 1, \
- .channel2 = mod, \
- .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | \
- IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT | \
- IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT | \
- IIO_CHAN_INFO_SCALE_SEPARATE_BIT, \
- .address = gyro, \
- .scan_index = ADIS16260_SCAN_GYRO, \
- .scan_type = { \
- .sign = 's', \
- .realbits = 14, \
- .storagebits = 16, \
- }, \
- }, { \
- .type = IIO_ANGL, \
- .modified = 1, \
- .channel2 = mod, \
- .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT, \
- .address = angle, \
- .scan_index = ADIS16260_SCAN_ANGL, \
- .scan_type = { \
- .sign = 'u', \
- .realbits = 14, \
- .storagebits = 16, \
- }, \
- }, { \
- .type = IIO_TEMP, \
- .indexed = 1, \
- .channel = 0, \
- .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | \
- IIO_CHAN_INFO_OFFSET_SEPARATE_BIT | \
- IIO_CHAN_INFO_SCALE_SEPARATE_BIT, \
- .address = temp, \
- .scan_index = ADIS16260_SCAN_TEMP, \
- .scan_type = { \
- .sign = 'u', \
- .realbits = 12, \
- .storagebits = 16, \
- }, \
- }, { \
- .type = IIO_VOLTAGE, \
- .indexed = 1, \
- .channel = 0, \
- .extend_name = "supply", \
- .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | \
- IIO_CHAN_INFO_SCALE_SEPARATE_BIT, \
- .address = in_supply, \
- .scan_index = ADIS16260_SCAN_SUPPLY, \
- .scan_type = { \
- .sign = 'u', \
- .realbits = 12, \
- .storagebits = 16, \
- }, \
- }, { \
- .type = IIO_VOLTAGE, \
- .indexed = 1, \
- .channel = 1, \
- .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | \
- IIO_CHAN_INFO_SCALE_SEPARATE_BIT, \
- .address = in_aux, \
- .scan_index = ADIS16260_SCAN_AUX_ADC, \
- .scan_type = { \
- .sign = 'u', \
- .realbits = 12, \
- .storagebits = 16, \
- }, \
- }, \
- IIO_CHAN_SOFT_TIMESTAMP(5), \
- }
+struct iio_chan_spec adis16260_channels_##axis[] = { \
+ ADIS_GYRO_CHAN(mod, ADIS16260_GYRO_OUT, ADIS16260_SCAN_GYRO, \
+ IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT | \
+ IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT, 14), \
+ ADIS_INCLI_CHAN(mod, ADIS16260_ANGL_OUT, ADIS16260_SCAN_ANGL, 0, 14), \
+ ADIS_TEMP_CHAN(ADIS16260_TEMP_OUT, ADIS16260_SCAN_TEMP, 12), \
+ ADIS_SUPPLY_CHAN(ADIS16260_SUPPLY_OUT, ADIS16260_SCAN_SUPPLY, 12), \
+ ADIS_AUX_ADC_CHAN(ADIS16260_AUX_ADC, ADIS16260_SCAN_AUX_ADC, 12), \
+ IIO_CHAN_SOFT_TIMESTAMP(5), \
+}
-static const ADIS16260_GYRO_CHANNEL_SET(x, IIO_MOD_X);
-static const ADIS16260_GYRO_CHANNEL_SET(y, IIO_MOD_Y);
-static const ADIS16260_GYRO_CHANNEL_SET(z, IIO_MOD_Z);
+static const ADIS16260_GYRO_CHANNEL_SET(x, X);
+static const ADIS16260_GYRO_CHANNEL_SET(y, Y);
+static const ADIS16260_GYRO_CHANNEL_SET(z, Z);
-static const u8 adis16260_addresses[5][3] = {
- [gyro] = { ADIS16260_GYRO_OUT,
- ADIS16260_GYRO_OFF,
- ADIS16260_GYRO_SCALE },
- [angle] = { ADIS16260_ANGL_OUT },
- [in_supply] = { ADIS16260_SUPPLY_OUT },
- [in_aux] = { ADIS16260_AUX_ADC },
- [temp] = { ADIS16260_TEMP_OUT },
+static const u8 adis16260_addresses[][2] = {
+ [ADIS16260_SCAN_GYRO] = { ADIS16260_GYRO_OFF, ADIS16260_GYRO_SCALE },
};
+
static int adis16260_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int *val, int *val2,
@@ -471,34 +154,13 @@
switch (mask) {
case IIO_CHAN_INFO_RAW:
- mutex_lock(&indio_dev->mlock);
- addr = adis16260_addresses[chan->address][0];
- ret = adis16260_spi_read_reg_16(indio_dev, addr, &val16);
- if (ret) {
- mutex_unlock(&indio_dev->mlock);
- return ret;
- }
-
- if (val16 & ADIS16260_ERROR_ACTIVE) {
- ret = adis16260_check_status(indio_dev);
- if (ret) {
- mutex_unlock(&indio_dev->mlock);
- return ret;
- }
- }
- val16 = val16 & ((1 << chan->scan_type.realbits) - 1);
- if (chan->scan_type.sign == 's')
- val16 = (s16)(val16 <<
- (16 - chan->scan_type.realbits)) >>
- (16 - chan->scan_type.realbits);
- *val = val16;
- mutex_unlock(&indio_dev->mlock);
- return IIO_VAL_INT;
+ return adis_single_conversion(indio_dev, chan,
+ ADIS16260_ERROR_ACTIVE, val);
case IIO_CHAN_INFO_SCALE:
switch (chan->type) {
case IIO_ANGL_VEL:
*val = 0;
- if (spi_get_device_id(st->us)->driver_data) {
+ if (spi_get_device_id(st->adis.spi)->driver_data) {
/* 0.01832 degree / sec */
*val2 = IIO_DEGREE_TO_RAD(18320);
} else {
@@ -533,10 +195,10 @@
break;
default:
return -EINVAL;
- };
+ }
mutex_lock(&indio_dev->mlock);
- addr = adis16260_addresses[chan->address][1];
- ret = adis16260_spi_read_reg_16(indio_dev, addr, &val16);
+ addr = adis16260_addresses[chan->scan_index][0];
+ ret = adis_read_reg_16(&st->adis, addr, &val16);
if (ret) {
mutex_unlock(&indio_dev->mlock);
return ret;
@@ -553,10 +215,10 @@
break;
default:
return -EINVAL;
- };
+ }
mutex_lock(&indio_dev->mlock);
- addr = adis16260_addresses[chan->address][2];
- ret = adis16260_spi_read_reg_16(indio_dev, addr, &val16);
+ addr = adis16260_addresses[chan->scan_index][1];
+ ret = adis_read_reg_16(&st->adis, addr, &val16);
if (ret) {
mutex_unlock(&indio_dev->mlock);
return ret;
@@ -574,18 +236,19 @@
int val2,
long mask)
{
+ struct adis16260_state *st = iio_priv(indio_dev);
int bits = 12;
s16 val16;
u8 addr;
switch (mask) {
case IIO_CHAN_INFO_CALIBBIAS:
val16 = val & ((1 << bits) - 1);
- addr = adis16260_addresses[chan->address][1];
- return adis16260_spi_write_reg_16(indio_dev, addr, val16);
+ addr = adis16260_addresses[chan->scan_index][0];
+ return adis_write_reg_16(&st->adis, addr, val16);
case IIO_CHAN_INFO_CALIBSCALE:
val16 = val & ((1 << bits) - 1);
- addr = adis16260_addresses[chan->address][2];
- return adis16260_spi_write_reg_16(indio_dev, addr, val16);
+ addr = adis16260_addresses[chan->scan_index][1];
+ return adis_write_reg_16(&st->adis, addr, val16);
}
return -EINVAL;
}
@@ -604,10 +267,41 @@
.attrs = &adis16260_attribute_group,
.read_raw = &adis16260_read_raw,
.write_raw = &adis16260_write_raw,
+ .update_scan_mode = adis_update_scan_mode,
.driver_module = THIS_MODULE,
};
-static int __devinit adis16260_probe(struct spi_device *spi)
+static const char * const adis1620_status_error_msgs[] = {
+ [ADIS16260_DIAG_STAT_FLASH_CHK_BIT] = "Flash checksum error",
+ [ADIS16260_DIAG_STAT_SELF_TEST_BIT] = "Self test error",
+ [ADIS16260_DIAG_STAT_OVERFLOW_BIT] = "Sensor overrange",
+ [ADIS16260_DIAG_STAT_SPI_FAIL_BIT] = "SPI failure",
+ [ADIS16260_DIAG_STAT_FLASH_UPT_BIT] = "Flash update failed",
+ [ADIS16260_DIAG_STAT_POWER_HIGH_BIT] = "Power supply above 5.25",
+ [ADIS16260_DIAG_STAT_POWER_LOW_BIT] = "Power supply below 4.75",
+};
+
+static const struct adis_data adis16260_data = {
+ .write_delay = 30,
+ .read_delay = 30,
+ .msc_ctrl_reg = ADIS16260_MSC_CTRL,
+ .glob_cmd_reg = ADIS16260_GLOB_CMD,
+ .diag_stat_reg = ADIS16260_DIAG_STAT,
+
+ .self_test_mask = ADIS16260_MSC_CTRL_MEM_TEST,
+ .startup_delay = ADIS16260_STARTUP_DELAY,
+
+ .status_error_msgs = adis1620_status_error_msgs,
+ .status_error_mask = BIT(ADIS16260_DIAG_STAT_FLASH_CHK_BIT) |
+ BIT(ADIS16260_DIAG_STAT_SELF_TEST_BIT) |
+ BIT(ADIS16260_DIAG_STAT_OVERFLOW_BIT) |
+ BIT(ADIS16260_DIAG_STAT_SPI_FAIL_BIT) |
+ BIT(ADIS16260_DIAG_STAT_FLASH_UPT_BIT) |
+ BIT(ADIS16260_DIAG_STAT_POWER_HIGH_BIT) |
+ BIT(ADIS16260_DIAG_STAT_POWER_LOW_BIT),
+};
+
+static int adis16260_probe(struct spi_device *spi)
{
int ret;
struct adis16260_platform_data *pd = spi->dev.platform_data;
@@ -626,10 +320,7 @@
/* this is only used for removal purposes */
spi_set_drvdata(spi, indio_dev);
- st->us = spi;
- mutex_init(&st->buf_lock);
-
- indio_dev->name = spi_get_device_id(st->us)->name;
+ indio_dev->name = spi_get_device_id(spi)->name;
indio_dev->dev.parent = &spi->dev;
indio_dev->info = &adis16260_info;
indio_dev->num_channels
@@ -653,17 +344,14 @@
indio_dev->num_channels = ARRAY_SIZE(adis16260_channels_x);
indio_dev->modes = INDIO_DIRECT_MODE;
- ret = adis16260_configure_ring(indio_dev);
+ ret = adis_init(&st->adis, indio_dev, spi, &adis16260_data);
if (ret)
goto error_free_dev;
- ret = iio_buffer_register(indio_dev,
- indio_dev->channels,
- ARRAY_SIZE(adis16260_channels_x));
- if (ret) {
- printk(KERN_ERR "failed to initialize the ring\n");
- goto error_unreg_ring_funcs;
- }
+ ret = adis_setup_buffer_and_trigger(&st->adis, indio_dev, NULL);
+ if (ret)
+ goto error_free_dev;
+
if (indio_dev->buffer) {
/* Set default scan mode */
iio_scan_mask_set(indio_dev, indio_dev->buffer,
@@ -677,43 +365,33 @@
iio_scan_mask_set(indio_dev, indio_dev->buffer,
ADIS16260_SCAN_ANGL);
}
- if (spi->irq) {
- ret = adis16260_probe_trigger(indio_dev);
- if (ret)
- goto error_uninitialize_ring;
- }
/* Get the device into a sane initial state */
- ret = adis16260_initial_setup(indio_dev);
+ ret = adis_initial_startup(&st->adis);
if (ret)
- goto error_remove_trigger;
+ goto error_cleanup_buffer_trigger;
ret = iio_device_register(indio_dev);
if (ret)
- goto error_remove_trigger;
+ goto error_cleanup_buffer_trigger;
return 0;
-error_remove_trigger:
- adis16260_remove_trigger(indio_dev);
-error_uninitialize_ring:
- iio_buffer_unregister(indio_dev);
-error_unreg_ring_funcs:
- adis16260_unconfigure_ring(indio_dev);
+error_cleanup_buffer_trigger:
+ adis_cleanup_buffer_and_trigger(&st->adis, indio_dev);
error_free_dev:
iio_device_free(indio_dev);
error_ret:
return ret;
}
-static int __devexit adis16260_remove(struct spi_device *spi)
+static int adis16260_remove(struct spi_device *spi)
{
struct iio_dev *indio_dev = spi_get_drvdata(spi);
+ struct adis16260_state *st = iio_priv(indio_dev);
iio_device_unregister(indio_dev);
adis16260_stop_device(indio_dev);
- adis16260_remove_trigger(indio_dev);
- iio_buffer_unregister(indio_dev);
- adis16260_unconfigure_ring(indio_dev);
+ adis_cleanup_buffer_and_trigger(&st->adis, indio_dev);
iio_device_free(indio_dev);
return 0;
@@ -739,7 +417,7 @@
.owner = THIS_MODULE,
},
.probe = adis16260_probe,
- .remove = __devexit_p(adis16260_remove),
+ .remove = adis16260_remove,
.id_table = adis16260_id,
};
module_spi_driver(adis16260_driver);
diff --git a/drivers/staging/iio/gyro/adis16260_ring.c b/drivers/staging/iio/gyro/adis16260_ring.c
deleted file mode 100644
index e294cb4..0000000
--- a/drivers/staging/iio/gyro/adis16260_ring.c
+++ /dev/null
@@ -1,136 +0,0 @@
-#include <linux/export.h>
-#include <linux/interrupt.h>
-#include <linux/mutex.h>
-#include <linux/kernel.h>
-#include <linux/spi/spi.h>
-#include <linux/slab.h>
-
-#include <linux/iio/iio.h>
-#include "../ring_sw.h"
-#include <linux/iio/trigger_consumer.h>
-#include "adis16260.h"
-
-/**
- * adis16260_read_ring_data() read data registers which will be placed into ring
- * @indio_dev: the IIO device
- * @rx: somewhere to pass back the value read
- **/
-static int adis16260_read_ring_data(struct iio_dev *indio_dev, u8 *rx)
-{
- struct spi_message msg;
- struct adis16260_state *st = iio_priv(indio_dev);
- struct spi_transfer xfers[ADIS16260_OUTPUTS + 1];
- int ret;
- int i;
-
- mutex_lock(&st->buf_lock);
-
- spi_message_init(&msg);
-
- memset(xfers, 0, sizeof(xfers));
- for (i = 0; i <= ADIS16260_OUTPUTS; i++) {
- xfers[i].bits_per_word = 8;
- xfers[i].cs_change = 1;
- xfers[i].len = 2;
- xfers[i].delay_usecs = 30;
- xfers[i].tx_buf = st->tx + 2 * i;
- if (i < 2) /* SUPPLY_OUT:0x02 GYRO_OUT:0x04 */
- st->tx[2 * i]
- = ADIS16260_READ_REG(ADIS16260_SUPPLY_OUT
- + 2 * i);
- else /* 0x06 to 0x09 is reserved */
- st->tx[2 * i]
- = ADIS16260_READ_REG(ADIS16260_SUPPLY_OUT
- + 2 * i + 4);
- st->tx[2 * i + 1] = 0;
- if (i >= 1)
- xfers[i].rx_buf = rx + 2 * (i - 1);
- spi_message_add_tail(&xfers[i], &msg);
- }
-
- ret = spi_sync(st->us, &msg);
- if (ret)
- dev_err(&st->us->dev, "problem when burst reading");
-
- mutex_unlock(&st->buf_lock);
-
- return ret;
-}
-
-static irqreturn_t adis16260_trigger_handler(int irq, void *p)
-{
- struct iio_poll_func *pf = p;
- struct iio_dev *indio_dev = pf->indio_dev;
- struct adis16260_state *st = iio_priv(indio_dev);
- int i = 0;
- s16 *data;
-
- data = kmalloc(indio_dev->scan_bytes, GFP_KERNEL);
- if (data == NULL) {
- dev_err(&st->us->dev, "memory alloc failed in ring bh");
- goto done;
- }
-
- if (!bitmap_empty(indio_dev->active_scan_mask, indio_dev->masklength) &&
- adis16260_read_ring_data(indio_dev, st->rx) >= 0)
- for (; i < bitmap_weight(indio_dev->active_scan_mask,
- indio_dev->masklength); i++)
- data[i] = be16_to_cpup((__be16 *)&(st->rx[i*2]));
-
- /* Guaranteed to be aligned with 8 byte boundary */
- if (indio_dev->scan_timestamp)
- *((s64 *)(data + ((i + 3)/4)*4)) = pf->timestamp;
-
- iio_push_to_buffer(indio_dev->buffer, (u8 *)data);
-
- kfree(data);
-done:
- iio_trigger_notify_done(indio_dev->trig);
-
- return IRQ_HANDLED;
-}
-
-void adis16260_unconfigure_ring(struct iio_dev *indio_dev)
-{
- iio_dealloc_pollfunc(indio_dev->pollfunc);
- iio_sw_rb_free(indio_dev->buffer);
-}
-
-static const struct iio_buffer_setup_ops adis16260_ring_setup_ops = {
- .preenable = &iio_sw_buffer_preenable,
- .postenable = &iio_triggered_buffer_postenable,
- .predisable = &iio_triggered_buffer_predisable,
-};
-
-int adis16260_configure_ring(struct iio_dev *indio_dev)
-{
- int ret = 0;
- struct iio_buffer *ring;
-
- ring = iio_sw_rb_allocate(indio_dev);
- if (!ring) {
- ret = -ENOMEM;
- return ret;
- }
- indio_dev->buffer = ring;
- ring->scan_timestamp = true;
- indio_dev->setup_ops = &adis16260_ring_setup_ops;
-
- indio_dev->pollfunc = iio_alloc_pollfunc(&iio_pollfunc_store_time,
- &adis16260_trigger_handler,
- IRQF_ONESHOT,
- indio_dev,
- "adis16260_consumer%d",
- indio_dev->id);
- if (indio_dev->pollfunc == NULL) {
- ret = -ENOMEM;
- goto error_iio_sw_rb_free;
- }
-
- indio_dev->modes |= INDIO_BUFFER_TRIGGERED;
- return 0;
-
-error_iio_sw_rb_free:
- iio_sw_rb_free(indio_dev->buffer);
- return ret;
-}
diff --git a/drivers/staging/iio/gyro/adis16260_trigger.c b/drivers/staging/iio/gyro/adis16260_trigger.c
deleted file mode 100644
index 034559e..0000000
--- a/drivers/staging/iio/gyro/adis16260_trigger.c
+++ /dev/null
@@ -1,75 +0,0 @@
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/spi/spi.h>
-#include <linux/export.h>
-
-#include <linux/iio/iio.h>
-#include <linux/iio/trigger.h>
-#include "adis16260.h"
-
-/**
- * adis16260_data_rdy_trigger_set_state() set datardy interrupt state
- **/
-static int adis16260_data_rdy_trigger_set_state(struct iio_trigger *trig,
- bool state)
-{
- struct iio_dev *indio_dev = trig->private_data;
-
- dev_dbg(&indio_dev->dev, "%s (%d)\n", __func__, state);
- return adis16260_set_irq(indio_dev, state);
-}
-
-static const struct iio_trigger_ops adis16260_trigger_ops = {
- .owner = THIS_MODULE,
- .set_trigger_state = &adis16260_data_rdy_trigger_set_state,
-};
-
-int adis16260_probe_trigger(struct iio_dev *indio_dev)
-{
- int ret;
- struct adis16260_state *st = iio_priv(indio_dev);
-
- st->trig = iio_trigger_alloc("%s-dev%d",
- spi_get_device_id(st->us)->name,
- indio_dev->id);
- if (st->trig == NULL) {
- ret = -ENOMEM;
- goto error_ret;
- }
-
- ret = request_irq(st->us->irq,
- &iio_trigger_generic_data_rdy_poll,
- IRQF_TRIGGER_RISING,
- "adis16260",
- st->trig);
- if (ret)
- goto error_free_trig;
-
- st->trig->dev.parent = &st->us->dev;
- st->trig->ops = &adis16260_trigger_ops;
- st->trig->private_data = indio_dev;
- ret = iio_trigger_register(st->trig);
-
- /* select default trigger */
- indio_dev->trig = st->trig;
- if (ret)
- goto error_free_irq;
-
- return 0;
-
-error_free_irq:
- free_irq(st->us->irq, st->trig);
-error_free_trig:
- iio_trigger_free(st->trig);
-error_ret:
- return ret;
-}
-
-void adis16260_remove_trigger(struct iio_dev *indio_dev)
-{
- struct adis16260_state *st = iio_priv(indio_dev);
-
- iio_trigger_unregister(st->trig);
- free_irq(st->us->irq, st->trig);
- iio_trigger_free(st->trig);
-}
diff --git a/drivers/staging/iio/gyro/adxrs450_core.c b/drivers/staging/iio/gyro/adxrs450_core.c
index d93527d..f0ce81d 100644
--- a/drivers/staging/iio/gyro/adxrs450_core.c
+++ b/drivers/staging/iio/gyro/adxrs450_core.c
@@ -365,7 +365,7 @@
.write_raw = &adxrs450_write_raw,
};
-static int __devinit adxrs450_probe(struct spi_device *spi)
+static int adxrs450_probe(struct spi_device *spi)
{
int ret;
struct adxrs450_state *st;
@@ -409,7 +409,7 @@
return ret;
}
-static int __devexit adxrs450_remove(struct spi_device *spi)
+static int adxrs450_remove(struct spi_device *spi)
{
iio_device_unregister(spi_get_drvdata(spi));
iio_device_free(spi_get_drvdata(spi));
@@ -430,7 +430,7 @@
.owner = THIS_MODULE,
},
.probe = adxrs450_probe,
- .remove = __devexit_p(adxrs450_remove),
+ .remove = adxrs450_remove,
.id_table = adxrs450_id,
};
module_spi_driver(adxrs450_driver);
diff --git a/drivers/staging/iio/iio_dummy_evgen.c b/drivers/staging/iio/iio_dummy_evgen.c
index 74e24e8..132d278 100644
--- a/drivers/staging/iio/iio_dummy_evgen.c
+++ b/drivers/staging/iio/iio_dummy_evgen.c
@@ -108,7 +108,7 @@
mutex_lock(&iio_evgen->lock);
for (i = 0; i < IIO_EVENTGEN_NO; i++)
- if (iio_evgen->inuse[i] == false) {
+ if (!iio_evgen->inuse[i]) {
ret = iio_evgen->base + i;
iio_evgen->inuse[i] = true;
break;
diff --git a/drivers/staging/iio/iio_hwmon.c b/drivers/staging/iio/iio_hwmon.c
index 5d49122..c7a5f97 100644
--- a/drivers/staging/iio/iio_hwmon.c
+++ b/drivers/staging/iio/iio_hwmon.c
@@ -69,7 +69,7 @@
}
}
-static int __devinit iio_hwmon_probe(struct platform_device *pdev)
+static int iio_hwmon_probe(struct platform_device *pdev)
{
struct iio_hwmon_state *st;
struct sensor_device_attribute *a;
@@ -170,7 +170,7 @@
return ret;
}
-static int __devexit iio_hwmon_remove(struct platform_device *pdev)
+static int iio_hwmon_remove(struct platform_device *pdev)
{
struct iio_hwmon_state *st = platform_get_drvdata(pdev);
@@ -189,7 +189,7 @@
.owner = THIS_MODULE,
},
.probe = iio_hwmon_probe,
- .remove = __devexit_p(iio_hwmon_remove),
+ .remove = iio_hwmon_remove,
};
module_platform_driver(iio_hwmon_driver);
diff --git a/drivers/staging/iio/iio_simple_dummy.c b/drivers/staging/iio/iio_simple_dummy.c
index dc6c728..a865adf 100644
--- a/drivers/staging/iio/iio_simple_dummy.c
+++ b/drivers/staging/iio/iio_simple_dummy.c
@@ -378,7 +378,7 @@
* const struct i2c_device_id *id)
* SPI: iio_dummy_probe(struct spi_device *spi)
*/
-static int __devinit iio_dummy_probe(int index)
+static int iio_dummy_probe(int index)
{
int ret;
struct iio_dev *indio_dev;
diff --git a/drivers/staging/iio/iio_simple_dummy_buffer.c b/drivers/staging/iio/iio_simple_dummy_buffer.c
index 697d970..dee16f0 100644
--- a/drivers/staging/iio/iio_simple_dummy_buffer.c
+++ b/drivers/staging/iio/iio_simple_dummy_buffer.c
@@ -46,7 +46,6 @@
{
struct iio_poll_func *pf = p;
struct iio_dev *indio_dev = pf->indio_dev;
- struct iio_buffer *buffer = indio_dev->buffer;
int len = 0;
u16 *data;
@@ -76,7 +75,7 @@
i < bitmap_weight(indio_dev->active_scan_mask,
indio_dev->masklength);
i++, j++) {
- j = find_next_bit(buffer->scan_mask,
+ j = find_next_bit(indio_dev->active_scan_mask,
indio_dev->masklength, j);
/* random access read from the 'device' */
data[i] = fakedata[j];
@@ -87,7 +86,7 @@
if (indio_dev->scan_timestamp)
*(s64 *)((u8 *)data + ALIGN(len, sizeof(s64)))
= iio_get_time_ns();
- iio_push_to_buffer(buffer, (u8 *)data);
+ iio_push_to_buffers(indio_dev, (u8 *)data);
kfree(data);
diff --git a/drivers/staging/iio/impedance-analyzer/ad5933.c b/drivers/staging/iio/impedance-analyzer/ad5933.c
index de21d47..779243d 100644
--- a/drivers/staging/iio/impedance-analyzer/ad5933.c
+++ b/drivers/staging/iio/impedance-analyzer/ad5933.c
@@ -647,7 +647,6 @@
struct ad5933_state *st = container_of(work,
struct ad5933_state, work.work);
struct iio_dev *indio_dev = i2c_get_clientdata(st->client);
- struct iio_buffer *ring = indio_dev->buffer;
signed short buf[2];
unsigned char status;
@@ -677,8 +676,7 @@
} else {
buf[0] = be16_to_cpu(buf[0]);
}
- /* save datum to the ring */
- iio_push_to_buffer(ring, (u8 *)buf);
+ iio_push_to_buffers(indio_dev, (u8 *)buf);
} else {
/* no data available - try again later */
schedule_delayed_work(&st->work, st->poll_time_jiffies);
@@ -699,7 +697,7 @@
mutex_unlock(&indio_dev->mlock);
}
-static int __devinit ad5933_probe(struct i2c_client *client,
+static int ad5933_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
int ret, voltage_uv = 0;
@@ -789,7 +787,7 @@
return ret;
}
-static __devexit int ad5933_remove(struct i2c_client *client)
+static int ad5933_remove(struct i2c_client *client)
{
struct iio_dev *indio_dev = i2c_get_clientdata(client);
struct ad5933_state *st = iio_priv(indio_dev);
@@ -819,7 +817,7 @@
.name = "ad5933",
},
.probe = ad5933_probe,
- .remove = __devexit_p(ad5933_remove),
+ .remove = ad5933_remove,
.id_table = ad5933_id,
};
module_i2c_driver(ad5933_driver);
diff --git a/drivers/staging/iio/imu/adis16400.h b/drivers/staging/iio/imu/adis16400.h
index 77c601d..7a105e9 100644
--- a/drivers/staging/iio/imu/adis16400.h
+++ b/drivers/staging/iio/imu/adis16400.h
@@ -123,6 +123,9 @@
/* SLP_CNT */
#define ADIS16400_SLP_CNT_POWER_OFF (1<<8)
+#define ADIS16334_RATE_DIV_SHIFT 8
+#define ADIS16334_RATE_INT_CLK BIT(0)
+
#define ADIS16400_MAX_TX 24
#define ADIS16400_MAX_RX 24
@@ -130,18 +133,21 @@
#define ADIS16400_SPI_BURST (u32)(1000 * 1000)
#define ADIS16400_SPI_FAST (u32)(2000 * 1000)
-#define ADIS16400_HAS_PROD_ID 1
-#define ADIS16400_NO_BURST 2
+#define ADIS16400_HAS_PROD_ID BIT(0)
+#define ADIS16400_NO_BURST BIT(1)
+#define ADIS16400_HAS_SLOW_MODE BIT(2)
+
struct adis16400_chip_info {
const struct iio_chan_spec *channels;
const int num_channels;
- const int product_id;
const long flags;
unsigned int gyro_scale_micro;
unsigned int accel_scale_micro;
int temp_scale_nano;
int temp_offset;
unsigned long default_scan_mask;
+ int (*set_freq)(struct iio_dev *indio_dev, unsigned int freq);
+ int (*get_freq)(struct iio_dev *indio_dev);
};
/**
diff --git a/drivers/staging/iio/imu/adis16400_core.c b/drivers/staging/iio/imu/adis16400_core.c
index 3144a7b..9c8f5ab 100644
--- a/drivers/staging/iio/imu/adis16400_core.c
+++ b/drivers/staging/iio/imu/adis16400_core.c
@@ -38,7 +38,6 @@
ADIS16360,
ADIS16362,
ADIS16364,
- ADIS16365,
ADIS16400,
};
@@ -161,10 +160,39 @@
return ret;
}
+static int adis16334_get_freq(struct iio_dev *indio_dev)
+{
+ int ret;
+ u16 t;
+
+ ret = adis16400_spi_read_reg_16(indio_dev, ADIS16400_SMPL_PRD, &t);
+ if (ret < 0)
+ return ret;
+
+ t >>= ADIS16334_RATE_DIV_SHIFT;
+
+ return (8192 >> t) / 10;
+}
+
+static int adis16334_set_freq(struct iio_dev *indio_dev, unsigned int freq)
+{
+ unsigned int t;
+
+ t = ilog2(8192 / (freq * 10));
+
+ if (t > 0x31)
+ t = 0x31;
+
+ t <<= ADIS16334_RATE_DIV_SHIFT;
+ t |= ADIS16334_RATE_INT_CLK;
+
+ return adis16400_spi_write_reg_16(indio_dev, ADIS16400_SMPL_PRD, t);
+}
+
static int adis16400_get_freq(struct iio_dev *indio_dev)
{
- u16 t;
int sps, ret;
+ u16 t;
ret = adis16400_spi_read_reg_16(indio_dev, ADIS16400_SMPL_PRD, &t);
if (ret < 0)
@@ -175,13 +203,33 @@
return sps;
}
+static int adis16400_set_freq(struct iio_dev *indio_dev, unsigned int freq)
+{
+ struct adis16400_state *st = iio_priv(indio_dev);
+ unsigned int t;
+
+ t = 1638 / freq;
+ if (t > 0)
+ t--;
+ t &= ADIS16400_SMPL_PRD_DIV_MASK;
+ if ((t & ADIS16400_SMPL_PRD_DIV_MASK) >= 0x0A)
+ st->us->max_speed_hz = ADIS16400_SPI_SLOW;
+ else
+ st->us->max_speed_hz = ADIS16400_SPI_FAST;
+
+ return adis16400_spi_write_reg_8(indio_dev,
+ ADIS16400_SMPL_PRD, t);
+}
+
static ssize_t adis16400_read_frequency(struct device *dev,
struct device_attribute *attr,
char *buf)
{
struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+ struct adis16400_state *st = iio_priv(indio_dev);
int ret, len = 0;
- ret = adis16400_get_freq(indio_dev);
+
+ ret = st->variant->get_freq(indio_dev);
if (ret < 0)
return ret;
len = sprintf(buf, "%d SPS\n", ret);
@@ -229,7 +277,6 @@
struct adis16400_state *st = iio_priv(indio_dev);
long val;
int ret;
- u8 t;
ret = strict_strtol(buf, 10, &val);
if (ret)
@@ -239,18 +286,7 @@
mutex_lock(&indio_dev->mlock);
- t = (1638 / val);
- if (t > 0)
- t--;
- t &= ADIS16400_SMPL_PRD_DIV_MASK;
- if ((t & ADIS16400_SMPL_PRD_DIV_MASK) >= 0x0A)
- st->us->max_speed_hz = ADIS16400_SPI_SLOW;
- else
- st->us->max_speed_hz = ADIS16400_SPI_FAST;
-
- ret = adis16400_spi_write_reg_8(indio_dev,
- ADIS16400_SMPL_PRD,
- t);
+ st->variant->set_freq(indio_dev, val);
/* Also update the filter */
mutex_unlock(&indio_dev->mlock);
@@ -378,10 +414,14 @@
{
int ret;
u16 prod_id, smp_prd;
+ unsigned int device_id;
struct adis16400_state *st = iio_priv(indio_dev);
- /* use low spi speed for init */
- st->us->max_speed_hz = ADIS16400_SPI_SLOW;
+ /* use low spi speed for init if the device has a slow mode */
+ if (st->variant->flags & ADIS16400_HAS_SLOW_MODE)
+ st->us->max_speed_hz = ADIS16400_SPI_SLOW;
+ else
+ st->us->max_speed_hz = ADIS16400_SPI_FAST;
st->us->mode = SPI_MODE_3;
spi_setup(st->us);
@@ -414,19 +454,27 @@
if (ret)
goto err_ret;
- if ((prod_id & 0xF000) != st->variant->product_id)
- dev_warn(&indio_dev->dev, "incorrect id");
+ sscanf(indio_dev->name, "adis%u\n", &device_id);
+
+ if (prod_id != device_id)
+ dev_warn(&indio_dev->dev, "Device ID(%u) and product ID(%u) do not match.",
+ device_id, prod_id);
dev_info(&indio_dev->dev, "%s: prod_id 0x%04x at CS%d (irq %d)\n",
indio_dev->name, prod_id,
st->us->chip_select, st->us->irq);
}
/* use high spi speed if possible */
- ret = adis16400_spi_read_reg_16(indio_dev,
- ADIS16400_SMPL_PRD, &smp_prd);
- if (!ret && (smp_prd & ADIS16400_SMPL_PRD_DIV_MASK) < 0x0A) {
- st->us->max_speed_hz = ADIS16400_SPI_SLOW;
- spi_setup(st->us);
+ if (st->variant->flags & ADIS16400_HAS_SLOW_MODE) {
+ ret = adis16400_spi_read_reg_16(indio_dev,
+ ADIS16400_SMPL_PRD, &smp_prd);
+ if (ret)
+ goto err_ret;
+
+ if ((smp_prd & ADIS16400_SMPL_PRD_DIV_MASK) < 0x0A) {
+ st->us->max_speed_hz = ADIS16400_SPI_FAST;
+ spi_setup(st->us);
+ }
}
err_ret:
@@ -503,7 +551,7 @@
mutex_lock(&indio_dev->mlock);
st->filt_int = val;
/* Work out update to current value */
- sps = adis16400_get_freq(indio_dev);
+ sps = st->variant->get_freq(indio_dev);
if (sps < 0) {
mutex_unlock(&indio_dev->mlock);
return sps;
@@ -601,7 +649,7 @@
mutex_unlock(&indio_dev->mlock);
return ret;
}
- ret = adis16400_get_freq(indio_dev);
+ val16 = st->variant->get_freq(indio_dev);
if (ret > 0)
*val = ret/adis16400_3db_divisors[val16 & 0x03];
*val2 = 0;
@@ -624,7 +672,7 @@
IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
.address = in_supply,
.scan_index = ADIS16400_SCAN_SUPPLY,
- .scan_type = IIO_ST('u', 14, 16, 0)
+ .scan_type = IIO_ST('u', 14, 16, 0),
}, {
.type = IIO_ANGL_VEL,
.modified = 1,
@@ -635,7 +683,7 @@
IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY_SHARED_BIT,
.address = gyro_x,
.scan_index = ADIS16400_SCAN_GYRO_X,
- .scan_type = IIO_ST('s', 14, 16, 0)
+ .scan_type = IIO_ST('s', 14, 16, 0),
}, {
.type = IIO_ANGL_VEL,
.modified = 1,
@@ -754,7 +802,7 @@
IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
.address = in_supply,
.scan_index = ADIS16400_SCAN_SUPPLY,
- .scan_type = IIO_ST('u', 12, 16, 0)
+ .scan_type = IIO_ST('u', 12, 16, 0),
}, {
.type = IIO_ANGL_VEL,
.modified = 1,
@@ -765,7 +813,7 @@
IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY_SHARED_BIT,
.address = gyro_x,
.scan_index = ADIS16400_SCAN_GYRO_X,
- .scan_type = IIO_ST('s', 14, 16, 0)
+ .scan_type = IIO_ST('s', 14, 16, 0),
}, {
.type = IIO_ANGL_VEL,
.modified = 1,
@@ -879,7 +927,7 @@
IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
.address = in_supply,
.scan_index = ADIS16400_SCAN_SUPPLY,
- .scan_type = IIO_ST('u', 12, 16, 0)
+ .scan_type = IIO_ST('u', 12, 16, 0),
}, {
.type = IIO_ANGL_VEL,
.modified = 1,
@@ -1060,6 +1108,7 @@
[ADIS16300] = {
.channels = adis16300_channels,
.num_channels = ARRAY_SIZE(adis16300_channels),
+ .flags = ADIS16400_HAS_SLOW_MODE,
.gyro_scale_micro = IIO_DEGREE_TO_RAD(50000), /* 0.05 deg/s */
.accel_scale_micro = 5884,
.temp_scale_nano = 140000000, /* 0.14 C */
@@ -1070,10 +1119,13 @@
(1 << ADIS16400_SCAN_TEMP) | (1 << ADIS16400_SCAN_ADC_0) |
(1 << ADIS16300_SCAN_INCLI_X) | (1 << ADIS16300_SCAN_INCLI_Y) |
(1 << 14),
+ .set_freq = adis16400_set_freq,
+ .get_freq = adis16400_get_freq,
},
[ADIS16334] = {
.channels = adis16334_channels,
.num_channels = ARRAY_SIZE(adis16334_channels),
+ .flags = ADIS16400_HAS_PROD_ID,
.gyro_scale_micro = IIO_DEGREE_TO_RAD(50000), /* 0.05 deg/s */
.accel_scale_micro = IIO_G_TO_M_S_2(1000), /* 1 mg */
.temp_scale_nano = 67850000, /* 0.06785 C */
@@ -1082,6 +1134,8 @@
(1 << ADIS16400_SCAN_GYRO_Y) | (1 << ADIS16400_SCAN_GYRO_Z) |
(1 << ADIS16400_SCAN_ACC_X) | (1 << ADIS16400_SCAN_ACC_Y) |
(1 << ADIS16400_SCAN_ACC_Z),
+ .set_freq = adis16334_set_freq,
+ .get_freq = adis16334_get_freq,
},
[ADIS16350] = {
.channels = adis16350_channels,
@@ -1091,62 +1145,57 @@
.temp_scale_nano = 145300000, /* 0.1453 C */
.temp_offset = 25000000 / 145300, /* 25 C = 0x00 */
.default_scan_mask = 0x7FF,
- .flags = ADIS16400_NO_BURST,
+ .flags = ADIS16400_NO_BURST | ADIS16400_HAS_SLOW_MODE,
+ .set_freq = adis16400_set_freq,
+ .get_freq = adis16400_get_freq,
},
[ADIS16360] = {
.channels = adis16350_channels,
.num_channels = ARRAY_SIZE(adis16350_channels),
- .flags = ADIS16400_HAS_PROD_ID,
- .product_id = 0x3FE8,
+ .flags = ADIS16400_HAS_PROD_ID | ADIS16400_HAS_SLOW_MODE,
.gyro_scale_micro = IIO_DEGREE_TO_RAD(50000), /* 0.05 deg/s */
.accel_scale_micro = IIO_G_TO_M_S_2(3333), /* 3.333 mg */
.temp_scale_nano = 136000000, /* 0.136 C */
.temp_offset = 25000000 / 136000, /* 25 C = 0x00 */
.default_scan_mask = 0x7FF,
+ .set_freq = adis16400_set_freq,
+ .get_freq = adis16400_get_freq,
},
[ADIS16362] = {
.channels = adis16350_channels,
.num_channels = ARRAY_SIZE(adis16350_channels),
- .flags = ADIS16400_HAS_PROD_ID,
- .product_id = 0x3FEA,
+ .flags = ADIS16400_HAS_PROD_ID | ADIS16400_HAS_SLOW_MODE,
.gyro_scale_micro = IIO_DEGREE_TO_RAD(50000), /* 0.05 deg/s */
.accel_scale_micro = IIO_G_TO_M_S_2(333), /* 0.333 mg */
.temp_scale_nano = 136000000, /* 0.136 C */
.temp_offset = 25000000 / 136000, /* 25 C = 0x00 */
.default_scan_mask = 0x7FF,
+ .set_freq = adis16400_set_freq,
+ .get_freq = adis16400_get_freq,
},
[ADIS16364] = {
.channels = adis16350_channels,
.num_channels = ARRAY_SIZE(adis16350_channels),
- .flags = ADIS16400_HAS_PROD_ID,
- .product_id = 0x3FEC,
+ .flags = ADIS16400_HAS_PROD_ID | ADIS16400_HAS_SLOW_MODE,
.gyro_scale_micro = IIO_DEGREE_TO_RAD(50000), /* 0.05 deg/s */
.accel_scale_micro = IIO_G_TO_M_S_2(1000), /* 1 mg */
.temp_scale_nano = 136000000, /* 0.136 C */
.temp_offset = 25000000 / 136000, /* 25 C = 0x00 */
.default_scan_mask = 0x7FF,
- },
- [ADIS16365] = {
- .channels = adis16350_channels,
- .num_channels = ARRAY_SIZE(adis16350_channels),
- .flags = ADIS16400_HAS_PROD_ID,
- .product_id = 0x3FED,
- .gyro_scale_micro = IIO_DEGREE_TO_RAD(50000), /* 0.05 deg/s */
- .accel_scale_micro = IIO_G_TO_M_S_2(1000), /* 1 mg */
- .temp_scale_nano = 136000000, /* 0.136 C */
- .temp_offset = 25000000 / 136000, /* 25 C = 0x00 */
- .default_scan_mask = 0x7FF,
+ .set_freq = adis16400_set_freq,
+ .get_freq = adis16400_get_freq,
},
[ADIS16400] = {
.channels = adis16400_channels,
.num_channels = ARRAY_SIZE(adis16400_channels),
- .flags = ADIS16400_HAS_PROD_ID,
- .product_id = 0x4015,
+ .flags = ADIS16400_HAS_PROD_ID | ADIS16400_HAS_SLOW_MODE,
.gyro_scale_micro = IIO_DEGREE_TO_RAD(50000), /* 0.05 deg/s */
.accel_scale_micro = IIO_G_TO_M_S_2(3333), /* 3.333 mg */
.default_scan_mask = 0xFFF,
.temp_scale_nano = 140000000, /* 0.14 C */
.temp_offset = 25000000 / 140000, /* 25 C = 0x00 */
+ .set_freq = adis16400_set_freq,
+ .get_freq = adis16400_get_freq,
}
};
@@ -1157,7 +1206,7 @@
.attrs = &adis16400_attribute_group,
};
-static int __devinit adis16400_probe(struct spi_device *spi)
+static int adis16400_probe(struct spi_device *spi)
{
int ret;
struct adis16400_state *st;
@@ -1224,7 +1273,7 @@
}
/* fixme, confirm ordering in this function */
-static int __devexit adis16400_remove(struct spi_device *spi)
+static int adis16400_remove(struct spi_device *spi)
{
struct iio_dev *indio_dev = spi_get_drvdata(spi);
@@ -1248,7 +1297,7 @@
{"adis16360", ADIS16360},
{"adis16362", ADIS16362},
{"adis16364", ADIS16364},
- {"adis16365", ADIS16365},
+ {"adis16365", ADIS16360},
{"adis16400", ADIS16400},
{"adis16405", ADIS16400},
{}
@@ -1262,7 +1311,7 @@
},
.id_table = adis16400_id,
.probe = adis16400_probe,
- .remove = __devexit_p(adis16400_remove),
+ .remove = adis16400_remove,
};
module_spi_driver(adis16400_driver);
diff --git a/drivers/staging/iio/imu/adis16400_ring.c b/drivers/staging/iio/imu/adis16400_ring.c
index 260bdd1..d46c1e3 100644
--- a/drivers/staging/iio/imu/adis16400_ring.c
+++ b/drivers/staging/iio/imu/adis16400_ring.c
@@ -114,7 +114,6 @@
struct iio_poll_func *pf = p;
struct iio_dev *indio_dev = pf->indio_dev;
struct adis16400_state *st = iio_priv(indio_dev);
- struct iio_buffer *ring = indio_dev->buffer;
int i = 0, j, ret = 0;
s16 *data;
@@ -148,9 +147,9 @@
}
}
/* Guaranteed to be aligned with 8 byte boundary */
- if (ring->scan_timestamp)
+ if (indio_dev->scan_timestamp)
*((s64 *)(data + ((i + 3)/4)*4)) = pf->timestamp;
- iio_push_to_buffer(ring, (u8 *) data);
+ iio_push_to_buffers(indio_dev, (u8 *) data);
done:
kfree(data);
diff --git a/drivers/staging/iio/light/isl29018.c b/drivers/staging/iio/light/isl29018.c
index 6ee5567..b0adac0 100644
--- a/drivers/staging/iio/light/isl29018.c
+++ b/drivers/staging/iio/light/isl29018.c
@@ -67,6 +67,7 @@
unsigned int range;
unsigned int adc_bit;
int prox_scheme;
+ bool suspended;
};
static int isl29018_set_range(struct isl29018_chip *chip, unsigned long range,
@@ -355,7 +356,7 @@
}
mutex_unlock(&chip->lock);
- return 0;
+ return ret;
}
static int isl29018_read_raw(struct iio_dev *indio_dev,
@@ -368,6 +369,10 @@
struct isl29018_chip *chip = iio_priv(indio_dev);
mutex_lock(&chip->lock);
+ if (chip->suspended) {
+ mutex_unlock(&chip->lock);
+ return -EBUSY;
+ }
switch (mask) {
case IIO_CHAN_INFO_RAW:
case IIO_CHAN_INFO_PROCESSED:
@@ -538,7 +543,7 @@
.cache_type = REGCACHE_RBTREE,
};
-static int __devinit isl29018_probe(struct i2c_client *client,
+static int isl29018_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct isl29018_chip *chip;
@@ -561,6 +566,7 @@
chip->lux_scale = 1;
chip->range = 1000;
chip->adc_bit = 16;
+ chip->suspended = false;
chip->regmap = devm_regmap_init_i2c(client, &isl29018_regmap_config);
if (IS_ERR(chip->regmap)) {
@@ -592,7 +598,7 @@
return err;
}
-static int __devexit isl29018_remove(struct i2c_client *client)
+static int isl29018_remove(struct i2c_client *client)
{
struct iio_dev *indio_dev = i2c_get_clientdata(client);
@@ -603,6 +609,44 @@
return 0;
}
+#ifdef CONFIG_PM_SLEEP
+static int isl29018_suspend(struct device *dev)
+{
+ struct isl29018_chip *chip = iio_priv(dev_get_drvdata(dev));
+
+ mutex_lock(&chip->lock);
+
+ /* Since this driver uses only polling commands, we are by default in
+ * auto shutdown (ie, power-down) mode.
+ * So we do not have much to do here.
+ */
+ chip->suspended = true;
+
+ mutex_unlock(&chip->lock);
+ return 0;
+}
+
+static int isl29018_resume(struct device *dev)
+{
+ struct isl29018_chip *chip = iio_priv(dev_get_drvdata(dev));
+ int err;
+
+ mutex_lock(&chip->lock);
+
+ err = isl29018_chip_init(chip);
+ if (!err)
+ chip->suspended = false;
+
+ mutex_unlock(&chip->lock);
+ return err;
+}
+
+static SIMPLE_DEV_PM_OPS(isl29018_pm_ops, isl29018_suspend, isl29018_resume);
+#define ISL29018_PM_OPS (&isl29018_pm_ops)
+#else
+#define ISL29018_PM_OPS NULL
+#endif
+
static const struct i2c_device_id isl29018_id[] = {
{"isl29018", 0},
{}
@@ -620,11 +664,12 @@
.class = I2C_CLASS_HWMON,
.driver = {
.name = "isl29018",
+ .pm = ISL29018_PM_OPS,
.owner = THIS_MODULE,
.of_match_table = isl29018_of_match,
},
.probe = isl29018_probe,
- .remove = __devexit_p(isl29018_remove),
+ .remove = isl29018_remove,
.id_table = isl29018_id,
};
module_i2c_driver(isl29018_driver);
diff --git a/drivers/staging/iio/light/isl29028.c b/drivers/staging/iio/light/isl29028.c
index 33a4c3f..e52af77 100644
--- a/drivers/staging/iio/light/isl29028.c
+++ b/drivers/staging/iio/light/isl29028.c
@@ -475,7 +475,7 @@
.cache_type = REGCACHE_RBTREE,
};
-static int __devinit isl29028_probe(struct i2c_client *client,
+static int isl29028_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct isl29028_chip *chip;
@@ -526,7 +526,7 @@
return ret;
}
-static int __devexit isl29028_remove(struct i2c_client *client)
+static int isl29028_remove(struct i2c_client *client)
{
struct iio_dev *indio_dev = i2c_get_clientdata(client);
@@ -555,7 +555,7 @@
.of_match_table = isl29028_of_match,
},
.probe = isl29028_probe,
- .remove = __devexit_p(isl29028_remove),
+ .remove = isl29028_remove,
.id_table = isl29028_id,
};
diff --git a/drivers/staging/iio/light/tsl2563.c b/drivers/staging/iio/light/tsl2563.c
index 954ca2c..1a9adc0 100644
--- a/drivers/staging/iio/light/tsl2563.c
+++ b/drivers/staging/iio/light/tsl2563.c
@@ -652,7 +652,7 @@
}
if (!state && (chip->intr & 0x30)) {
- chip->intr |= ~0x30;
+ chip->intr &= ~0x30;
ret = i2c_smbus_write_byte_data(chip->client,
TSL2563_CMD | TSL2563_REG_INT,
chip->intr);
@@ -705,7 +705,7 @@
.write_event_config = &tsl2563_write_interrupt_config,
};
-static int __devinit tsl2563_probe(struct i2c_client *client,
+static int tsl2563_probe(struct i2c_client *client,
const struct i2c_device_id *device_id)
{
struct iio_dev *indio_dev;
@@ -805,7 +805,7 @@
return err;
}
-static int __devexit tsl2563_remove(struct i2c_client *client)
+static int tsl2563_remove(struct i2c_client *client)
{
struct tsl2563_chip *chip = i2c_get_clientdata(client);
struct iio_dev *indio_dev = iio_priv_to_dev(chip);
@@ -814,7 +814,7 @@
if (!chip->int_enabled)
cancel_delayed_work(&chip->poweroff_work);
/* Ensure that interrupts are disabled - then flush any bottom halves */
- chip->intr |= ~0x30;
+ chip->intr &= ~0x30;
i2c_smbus_write_byte_data(chip->client, TSL2563_CMD | TSL2563_REG_INT,
chip->intr);
flush_scheduled_work();
@@ -889,7 +889,7 @@
.pm = TSL2563_PM_OPS,
},
.probe = tsl2563_probe,
- .remove = __devexit_p(tsl2563_remove),
+ .remove = tsl2563_remove,
.id_table = tsl2563_id,
};
module_i2c_driver(tsl2563_i2c_driver);
diff --git a/drivers/staging/iio/light/tsl2583.c b/drivers/staging/iio/light/tsl2583.c
index 6d2f4c6..b377dd3 100644
--- a/drivers/staging/iio/light/tsl2583.c
+++ b/drivers/staging/iio/light/tsl2583.c
@@ -799,7 +799,7 @@
* Client probe function - When a valid device is found, the driver's device
* data structure is updated, and initialization completes successfully.
*/
-static int __devinit taos_probe(struct i2c_client *clientp,
+static int taos_probe(struct i2c_client *clientp,
const struct i2c_device_id *idp)
{
int i, ret;
@@ -923,7 +923,7 @@
#define TAOS_PM_OPS NULL
#endif
-static int __devexit taos_remove(struct i2c_client *client)
+static int taos_remove(struct i2c_client *client)
{
iio_device_unregister(i2c_get_clientdata(client));
iio_device_free(i2c_get_clientdata(client));
@@ -947,7 +947,7 @@
},
.id_table = taos_idtable,
.probe = taos_probe,
- .remove = __devexit_p(taos_remove),
+ .remove = taos_remove,
};
module_i2c_driver(taos_driver);
diff --git a/drivers/staging/iio/light/tsl2x7x_core.c b/drivers/staging/iio/light/tsl2x7x_core.c
index 497a977..9e50fbb 100644
--- a/drivers/staging/iio/light/tsl2x7x_core.c
+++ b/drivers/staging/iio/light/tsl2x7x_core.c
@@ -1897,7 +1897,7 @@
},
};
-static int __devinit tsl2x7x_probe(struct i2c_client *clientp,
+static int tsl2x7x_probe(struct i2c_client *clientp,
const struct i2c_device_id *id)
{
int ret;
@@ -2026,7 +2026,7 @@
return ret;
}
-static int __devexit tsl2x7x_remove(struct i2c_client *client)
+static int tsl2x7x_remove(struct i2c_client *client)
{
struct iio_dev *indio_dev = i2c_get_clientdata(client);
@@ -2070,7 +2070,7 @@
},
.id_table = tsl2x7x_idtable,
.probe = tsl2x7x_probe,
- .remove = __devexit_p(tsl2x7x_remove),
+ .remove = tsl2x7x_remove,
};
module_i2c_driver(tsl2x7x_driver);
diff --git a/drivers/staging/iio/magnetometer/ak8975.c b/drivers/staging/iio/magnetometer/ak8975.c
index 01b4b07..28f080e 100644
--- a/drivers/staging/iio/magnetometer/ak8975.c
+++ b/drivers/staging/iio/magnetometer/ak8975.c
@@ -409,7 +409,7 @@
.driver_module = THIS_MODULE,
};
-static int __devinit ak8975_probe(struct i2c_client *client,
+static int ak8975_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct ak8975_data *data;
@@ -475,7 +475,7 @@
return err;
}
-static int __devexit ak8975_remove(struct i2c_client *client)
+static int ak8975_remove(struct i2c_client *client)
{
struct iio_dev *indio_dev = i2c_get_clientdata(client);
struct ak8975_data *data = iio_priv(indio_dev);
@@ -510,7 +510,7 @@
.of_match_table = ak8975_of_match,
},
.probe = ak8975_probe,
- .remove = __devexit_p(ak8975_remove),
+ .remove = ak8975_remove,
.id_table = ak8975_id,
};
module_i2c_driver(ak8975_driver);
diff --git a/drivers/staging/iio/magnetometer/hmc5843.c b/drivers/staging/iio/magnetometer/hmc5843.c
index 10e0954..1a520ec 100644
--- a/drivers/staging/iio/magnetometer/hmc5843.c
+++ b/drivers/staging/iio/magnetometer/hmc5843.c
@@ -555,7 +555,7 @@
*val = 0;
*val2 = data->variant->regval_to_nanoscale[data->range];
return IIO_VAL_INT_PLUS_NANO;
- };
+ }
return -EINVAL;
}
@@ -665,7 +665,7 @@
.driver_module = THIS_MODULE,
};
-static int __devinit hmc5843_probe(struct i2c_client *client,
+static int hmc5843_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct hmc5843_data *data;
@@ -704,7 +704,7 @@
return err;
}
-static int __devexit hmc5843_remove(struct i2c_client *client)
+static int hmc5843_remove(struct i2c_client *client)
{
struct iio_dev *indio_dev = i2c_get_clientdata(client);
@@ -755,7 +755,7 @@
},
.id_table = hmc5843_id,
.probe = hmc5843_probe,
- .remove = __devexit_p(hmc5843_remove),
+ .remove = hmc5843_remove,
.detect = hmc5843_detect,
.address_list = normal_i2c,
};
diff --git a/drivers/staging/iio/meter/ade7753.c b/drivers/staging/iio/meter/ade7753.c
index 8b9eceb..51c3bde 100644
--- a/drivers/staging/iio/meter/ade7753.c
+++ b/drivers/staging/iio/meter/ade7753.c
@@ -512,7 +512,7 @@
.driver_module = THIS_MODULE,
};
-static int __devinit ade7753_probe(struct spi_device *spi)
+static int ade7753_probe(struct spi_device *spi)
{
int ret;
struct ade7753_state *st;
@@ -555,7 +555,7 @@
}
/* fixme, confirm ordering in this function */
-static int __devexit ade7753_remove(struct spi_device *spi)
+static int ade7753_remove(struct spi_device *spi)
{
struct iio_dev *indio_dev = spi_get_drvdata(spi);
@@ -572,7 +572,7 @@
.owner = THIS_MODULE,
},
.probe = ade7753_probe,
- .remove = __devexit_p(ade7753_remove),
+ .remove = ade7753_remove,
};
module_spi_driver(ade7753_driver);
diff --git a/drivers/staging/iio/meter/ade7753.h b/drivers/staging/iio/meter/ade7753.h
index 3f059d3..a9d93cc 100644
--- a/drivers/staging/iio/meter/ade7753.h
+++ b/drivers/staging/iio/meter/ade7753.h
@@ -55,8 +55,6 @@
#define ADE7753_SPI_BURST (u32)(1000 * 1000)
#define ADE7753_SPI_FAST (u32)(2000 * 1000)
-#define DRIVER_NAME "ade7753"
-
/**
* struct ade7753_state - device instance specific data
* @us: actual spi_device
diff --git a/drivers/staging/iio/meter/ade7754.c b/drivers/staging/iio/meter/ade7754.c
index 76e0ade..b50c89e 100644
--- a/drivers/staging/iio/meter/ade7754.c
+++ b/drivers/staging/iio/meter/ade7754.c
@@ -535,7 +535,7 @@
.driver_module = THIS_MODULE,
};
-static int __devinit ade7754_probe(struct spi_device *spi)
+static int ade7754_probe(struct spi_device *spi)
{
int ret;
struct ade7754_state *st;
@@ -577,7 +577,7 @@
}
/* fixme, confirm ordering in this function */
-static int __devexit ade7754_remove(struct spi_device *spi)
+static int ade7754_remove(struct spi_device *spi)
{
struct iio_dev *indio_dev = spi_get_drvdata(spi);
@@ -594,7 +594,7 @@
.owner = THIS_MODULE,
},
.probe = ade7754_probe,
- .remove = __devexit_p(ade7754_remove),
+ .remove = ade7754_remove,
};
module_spi_driver(ade7754_driver);
diff --git a/drivers/staging/iio/meter/ade7754.h b/drivers/staging/iio/meter/ade7754.h
index 6121125..e42ffc3 100644
--- a/drivers/staging/iio/meter/ade7754.h
+++ b/drivers/staging/iio/meter/ade7754.h
@@ -73,8 +73,6 @@
#define ADE7754_SPI_BURST (u32)(1000 * 1000)
#define ADE7754_SPI_FAST (u32)(2000 * 1000)
-#define DRIVER_NAME "ade7754"
-
/**
* struct ade7754_state - device instance specific data
* @us: actual spi_device
diff --git a/drivers/staging/iio/meter/ade7758.h b/drivers/staging/iio/meter/ade7758.h
index 1e11ad5..0731820 100644
--- a/drivers/staging/iio/meter/ade7758.h
+++ b/drivers/staging/iio/meter/ade7758.h
@@ -105,9 +105,6 @@
#define AD7758_APP_PWR 4
#define AD7758_WT(p, w) (((w) << 2) | (p))
-#define DRIVER_NAME "ade7758"
-
-
/**
* struct ade7758_state - device instance specific data
* @us: actual spi_device
diff --git a/drivers/staging/iio/meter/ade7758_core.c b/drivers/staging/iio/meter/ade7758_core.c
index a0fef77..3454e51 100644
--- a/drivers/staging/iio/meter/ade7758_core.c
+++ b/drivers/staging/iio/meter/ade7758_core.c
@@ -881,7 +881,7 @@
.driver_module = THIS_MODULE,
};
-static int __devinit ade7758_probe(struct spi_device *spi)
+static int ade7758_probe(struct spi_device *spi)
{
int ret;
struct ade7758_state *st;
@@ -962,7 +962,7 @@
return ret;
}
-static int __devexit ade7758_remove(struct spi_device *spi)
+static int ade7758_remove(struct spi_device *spi)
{
struct iio_dev *indio_dev = spi_get_drvdata(spi);
struct ade7758_state *st = iio_priv(indio_dev);
@@ -992,7 +992,7 @@
.owner = THIS_MODULE,
},
.probe = ade7758_probe,
- .remove = __devexit_p(ade7758_remove),
+ .remove = ade7758_remove,
.id_table = ade7758_id,
};
module_spi_driver(ade7758_driver);
diff --git a/drivers/staging/iio/meter/ade7758_ring.c b/drivers/staging/iio/meter/ade7758_ring.c
index 9e49bac..4552a4c 100644
--- a/drivers/staging/iio/meter/ade7758_ring.c
+++ b/drivers/staging/iio/meter/ade7758_ring.c
@@ -73,7 +73,7 @@
if (indio_dev->scan_timestamp)
dat64[1] = pf->timestamp;
- iio_push_to_buffer(indio_dev->buffer, (u8 *)dat64);
+ iio_push_to_buffers(indio_dev, (u8 *)dat64);
iio_trigger_notify_done(indio_dev->trig);
diff --git a/drivers/staging/iio/meter/ade7759.c b/drivers/staging/iio/meter/ade7759.c
index cb0707c..10b911b 100644
--- a/drivers/staging/iio/meter/ade7759.c
+++ b/drivers/staging/iio/meter/ade7759.c
@@ -458,7 +458,7 @@
.driver_module = THIS_MODULE,
};
-static int __devinit ade7759_probe(struct spi_device *spi)
+static int ade7759_probe(struct spi_device *spi)
{
int ret;
struct ade7759_state *st;
@@ -499,7 +499,7 @@
}
/* fixme, confirm ordering in this function */
-static int __devexit ade7759_remove(struct spi_device *spi)
+static int ade7759_remove(struct spi_device *spi)
{
struct iio_dev *indio_dev = spi_get_drvdata(spi);
@@ -516,7 +516,7 @@
.owner = THIS_MODULE,
},
.probe = ade7759_probe,
- .remove = __devexit_p(ade7759_remove),
+ .remove = ade7759_remove,
};
module_spi_driver(ade7759_driver);
diff --git a/drivers/staging/iio/meter/ade7759.h b/drivers/staging/iio/meter/ade7759.h
index c81d23d..f9ff1f8 100644
--- a/drivers/staging/iio/meter/ade7759.h
+++ b/drivers/staging/iio/meter/ade7759.h
@@ -36,8 +36,6 @@
#define ADE7759_SPI_BURST (u32)(1000 * 1000)
#define ADE7759_SPI_FAST (u32)(2000 * 1000)
-#define DRIVER_NAME "ade7759"
-
/**
* struct ade7759_state - device instance specific data
* @us: actual spi_device
diff --git a/drivers/staging/iio/meter/ade7854-i2c.c b/drivers/staging/iio/meter/ade7854-i2c.c
index 0609046..db9ef6c 100644
--- a/drivers/staging/iio/meter/ade7854-i2c.c
+++ b/drivers/staging/iio/meter/ade7854-i2c.c
@@ -201,7 +201,7 @@
return ret;
}
-static int __devinit ade7854_i2c_probe(struct i2c_client *client,
+static int ade7854_i2c_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
int ret;
@@ -231,7 +231,7 @@
return ret;
}
-static int __devexit ade7854_i2c_remove(struct i2c_client *client)
+static int ade7854_i2c_remove(struct i2c_client *client)
{
return ade7854_remove(i2c_get_clientdata(client));
}
@@ -250,7 +250,7 @@
.name = "ade7854",
},
.probe = ade7854_i2c_probe,
- .remove = __devexit_p(ade7854_i2c_remove),
+ .remove = ade7854_i2c_remove,
.id_table = ade7854_id,
};
module_i2c_driver(ade7854_i2c_driver);
diff --git a/drivers/staging/iio/meter/ade7854-spi.c b/drivers/staging/iio/meter/ade7854-spi.c
index 7dae035..f0984fa 100644
--- a/drivers/staging/iio/meter/ade7854-spi.c
+++ b/drivers/staging/iio/meter/ade7854-spi.c
@@ -300,7 +300,7 @@
return ret;
}
-static int __devinit ade7854_spi_probe(struct spi_device *spi)
+static int ade7854_spi_probe(struct spi_device *spi)
{
int ret;
struct ade7854_state *st;
@@ -330,7 +330,7 @@
return 0;
}
-static int __devexit ade7854_spi_remove(struct spi_device *spi)
+static int ade7854_spi_remove(struct spi_device *spi)
{
ade7854_remove(spi_get_drvdata(spi));
@@ -351,7 +351,7 @@
.owner = THIS_MODULE,
},
.probe = ade7854_spi_probe,
- .remove = __devexit_p(ade7854_spi_remove),
+ .remove = ade7854_spi_remove,
.id_table = ade7854_id,
};
module_spi_driver(ade7854_driver);
diff --git a/drivers/staging/iio/meter/ade7854.h b/drivers/staging/iio/meter/ade7854.h
index 2c96e86..0653457 100644
--- a/drivers/staging/iio/meter/ade7854.h
+++ b/drivers/staging/iio/meter/ade7854.h
@@ -142,8 +142,6 @@
#define ADE7854_SPI_BURST (u32)(1000 * 1000)
#define ADE7854_SPI_FAST (u32)(2000 * 1000)
-#define DRIVER_NAME "ade7854"
-
/**
* struct ade7854_state - device instance specific data
* @spi: actual spi_device
diff --git a/drivers/staging/iio/resolver/ad2s1200.c b/drivers/staging/iio/resolver/ad2s1200.c
index 8b71eb0..4fe3499 100644
--- a/drivers/staging/iio/resolver/ad2s1200.c
+++ b/drivers/staging/iio/resolver/ad2s1200.c
@@ -99,7 +99,7 @@
.driver_module = THIS_MODULE,
};
-static int __devinit ad2s1200_probe(struct spi_device *spi)
+static int ad2s1200_probe(struct spi_device *spi)
{
struct ad2s1200_state *st;
struct iio_dev *indio_dev;
@@ -149,7 +149,7 @@
return ret;
}
-static int __devexit ad2s1200_remove(struct spi_device *spi)
+static int ad2s1200_remove(struct spi_device *spi)
{
iio_device_unregister(spi_get_drvdata(spi));
iio_device_free(spi_get_drvdata(spi));
@@ -170,7 +170,7 @@
.owner = THIS_MODULE,
},
.probe = ad2s1200_probe,
- .remove = __devexit_p(ad2s1200_remove),
+ .remove = ad2s1200_remove,
.id_table = ad2s1200_id,
};
module_spi_driver(ad2s1200_driver);
diff --git a/drivers/staging/iio/resolver/ad2s1210.c b/drivers/staging/iio/resolver/ad2s1210.c
index 4ba4d05..ed07a34 100644
--- a/drivers/staging/iio/resolver/ad2s1210.c
+++ b/drivers/staging/iio/resolver/ad2s1210.c
@@ -610,7 +610,7 @@
.attrs = ad2s1210_attributes,
};
-static int __devinit ad2s1210_initial(struct ad2s1210_state *st)
+static int ad2s1210_initial(struct ad2s1210_state *st)
{
unsigned char data;
int ret;
@@ -681,7 +681,7 @@
gpio_free_array(ad2s1210_gpios, ARRAY_SIZE(ad2s1210_gpios));
}
-static int __devinit ad2s1210_probe(struct spi_device *spi)
+static int ad2s1210_probe(struct spi_device *spi)
{
struct iio_dev *indio_dev;
struct ad2s1210_state *st;
@@ -736,7 +736,7 @@
return ret;
}
-static int __devexit ad2s1210_remove(struct spi_device *spi)
+static int ad2s1210_remove(struct spi_device *spi)
{
struct iio_dev *indio_dev = spi_get_drvdata(spi);
@@ -759,7 +759,7 @@
.owner = THIS_MODULE,
},
.probe = ad2s1210_probe,
- .remove = __devexit_p(ad2s1210_remove),
+ .remove = ad2s1210_remove,
.id_table = ad2s1210_id,
};
module_spi_driver(ad2s1210_driver);
diff --git a/drivers/staging/iio/resolver/ad2s90.c b/drivers/staging/iio/resolver/ad2s90.c
index a805722..0aecfbc 100644
--- a/drivers/staging/iio/resolver/ad2s90.c
+++ b/drivers/staging/iio/resolver/ad2s90.c
@@ -58,7 +58,7 @@
.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
};
-static int __devinit ad2s90_probe(struct spi_device *spi)
+static int ad2s90_probe(struct spi_device *spi)
{
struct iio_dev *indio_dev;
struct ad2s90_state *st;
@@ -98,7 +98,7 @@
return ret;
}
-static int __devexit ad2s90_remove(struct spi_device *spi)
+static int ad2s90_remove(struct spi_device *spi)
{
iio_device_unregister(spi_get_drvdata(spi));
iio_device_free(spi_get_drvdata(spi));
@@ -118,7 +118,7 @@
.owner = THIS_MODULE,
},
.probe = ad2s90_probe,
- .remove = __devexit_p(ad2s90_remove),
+ .remove = ad2s90_remove,
.id_table = ad2s90_id,
};
module_spi_driver(ad2s90_driver);
diff --git a/drivers/staging/iio/trigger/iio-trig-bfin-timer.c b/drivers/staging/iio/trigger/iio-trig-bfin-timer.c
index 52062d7..42798da 100644
--- a/drivers/staging/iio/trigger/iio-trig-bfin-timer.c
+++ b/drivers/staging/iio/trigger/iio-trig-bfin-timer.c
@@ -180,7 +180,7 @@
.set_trigger_state = iio_bfin_tmr_set_state,
};
-static int __devinit iio_bfin_tmr_trigger_probe(struct platform_device *pdev)
+static int iio_bfin_tmr_trigger_probe(struct platform_device *pdev)
{
struct iio_bfin_timer_trigger_pdata *pdata = pdev->dev.platform_data;
struct bfin_tmr_state *st;
@@ -275,7 +275,7 @@
return ret;
}
-static int __devexit iio_bfin_tmr_trigger_remove(struct platform_device *pdev)
+static int iio_bfin_tmr_trigger_remove(struct platform_device *pdev)
{
struct bfin_tmr_state *st = platform_get_drvdata(pdev);
@@ -296,7 +296,7 @@
.owner = THIS_MODULE,
},
.probe = iio_bfin_tmr_trigger_probe,
- .remove = __devexit_p(iio_bfin_tmr_trigger_remove),
+ .remove = iio_bfin_tmr_trigger_remove,
};
module_platform_driver(iio_bfin_tmr_trigger_driver);
diff --git a/drivers/staging/iio/trigger/iio-trig-gpio.c b/drivers/staging/iio/trigger/iio-trig-gpio.c
index 5ff4d7f..fcc4cb0 100644
--- a/drivers/staging/iio/trigger/iio-trig-gpio.c
+++ b/drivers/staging/iio/trigger/iio-trig-gpio.c
@@ -51,7 +51,7 @@
.owner = THIS_MODULE,
};
-static int __devinit iio_gpio_trigger_probe(struct platform_device *pdev)
+static int iio_gpio_trigger_probe(struct platform_device *pdev)
{
struct iio_gpio_trigger_info *trig_info;
struct iio_trigger *trig, *trig2;
@@ -130,7 +130,7 @@
return ret;
}
-static int __devexit iio_gpio_trigger_remove(struct platform_device *pdev)
+static int iio_gpio_trigger_remove(struct platform_device *pdev)
{
struct iio_trigger *trig, *trig2;
struct iio_gpio_trigger_info *trig_info;
@@ -153,7 +153,7 @@
static struct platform_driver iio_gpio_trigger_driver = {
.probe = iio_gpio_trigger_probe,
- .remove = __devexit_p(iio_gpio_trigger_remove),
+ .remove = iio_gpio_trigger_remove,
.driver = {
.name = "iio_gpio_trigger",
.owner = THIS_MODULE,
diff --git a/drivers/staging/iio/trigger/iio-trig-periodic-rtc.c b/drivers/staging/iio/trigger/iio-trig-periodic-rtc.c
index a3de76d..9102b1b 100644
--- a/drivers/staging/iio/trigger/iio-trig-periodic-rtc.c
+++ b/drivers/staging/iio/trigger/iio-trig-periodic-rtc.c
@@ -101,7 +101,7 @@
.set_trigger_state = &iio_trig_periodic_rtc_set_state,
};
-static int __devinit iio_trig_periodic_rtc_probe(struct platform_device *dev)
+static int iio_trig_periodic_rtc_probe(struct platform_device *dev)
{
char **pdata = dev->dev.platform_data;
struct iio_prtc_trigger_info *trig_info;
@@ -167,7 +167,7 @@
return ret;
}
-static int __devexit iio_trig_periodic_rtc_remove(struct platform_device *dev)
+static int iio_trig_periodic_rtc_remove(struct platform_device *dev)
{
struct iio_trigger *trig, *trig2;
struct iio_prtc_trigger_info *trig_info;
@@ -188,7 +188,7 @@
static struct platform_driver iio_trig_periodic_rtc_driver = {
.probe = iio_trig_periodic_rtc_probe,
- .remove = __devexit_p(iio_trig_periodic_rtc_remove),
+ .remove = iio_trig_periodic_rtc_remove,
.driver = {
.name = "iio_prtc_trigger",
.owner = THIS_MODULE,
diff --git a/drivers/staging/imx-drm/Kconfig b/drivers/staging/imx-drm/Kconfig
index 14b4449..be7e2e3 100644
--- a/drivers/staging/imx-drm/Kconfig
+++ b/drivers/staging/imx-drm/Kconfig
@@ -3,7 +3,7 @@
select DRM_KMS_HELPER
select DRM_GEM_CMA_HELPER
select DRM_KMS_CMA_HELPER
- depends on DRM && ARCH_MXC
+ depends on DRM && (ARCH_MXC || ARCH_MULTIPLATFORM)
help
enable i.MX graphics support
diff --git a/drivers/staging/imx-drm/imx-drm-core.c b/drivers/staging/imx-drm/imx-drm-core.c
index 1913199..ecf0f44 100644
--- a/drivers/staging/imx-drm/imx-drm-core.c
+++ b/drivers/staging/imx-drm/imx-drm-core.c
@@ -824,7 +824,7 @@
static struct platform_driver imx_drm_pdrv = {
.probe = imx_drm_platform_probe,
- .remove = __devexit_p(imx_drm_platform_remove),
+ .remove = imx_drm_platform_remove,
.driver = {
.owner = THIS_MODULE,
.name = "imx-drm",
diff --git a/drivers/staging/imx-drm/ipu-v3/imx-ipu-v3.h b/drivers/staging/imx-drm/ipu-v3/imx-ipu-v3.h
index 74158dd..99d1cce 100644
--- a/drivers/staging/imx-drm/ipu-v3/imx-ipu-v3.h
+++ b/drivers/staging/imx-drm/ipu-v3/imx-ipu-v3.h
@@ -16,7 +16,6 @@
#include <linux/videodev2.h>
#include <linux/bitmap.h>
#include <linux/fb.h>
-#include <linux/videodev2.h>
struct ipu_soc;
@@ -293,6 +292,7 @@
void ipu_cpmem_set_yuv_planar(struct ipu_ch_param __iomem *p, u32 pixel_format,
int stride, int height);
+void ipu_cpmem_set_yuv_interleaved(struct ipu_ch_param *p, u32 pixel_format);
void ipu_cpmem_set_yuv_planar_full(struct ipu_ch_param __iomem *p,
u32 pixel_format, int stride, int u_offset, int v_offset);
int ipu_cpmem_set_fmt(struct ipu_ch_param __iomem *cpmem, u32 pixelformat);
diff --git a/drivers/staging/imx-drm/ipu-v3/ipu-common.c b/drivers/staging/imx-drm/ipu-v3/ipu-common.c
index f381960..677e665 100644
--- a/drivers/staging/imx-drm/ipu-v3/ipu-common.c
+++ b/drivers/staging/imx-drm/ipu-v3/ipu-common.c
@@ -225,6 +225,23 @@
}
EXPORT_SYMBOL_GPL(ipu_cpmem_set_format_passthrough);
+void ipu_cpmem_set_yuv_interleaved(struct ipu_ch_param *p, u32 pixel_format)
+{
+ switch (pixel_format) {
+ case V4L2_PIX_FMT_UYVY:
+ ipu_ch_param_write_field(p, IPU_FIELD_BPP, 3); /* bits/pixel */
+ ipu_ch_param_write_field(p, IPU_FIELD_PFS, 0xA); /* pix format */
+ ipu_ch_param_write_field(p, IPU_FIELD_NPB, 31); /* burst size */
+ break;
+ case V4L2_PIX_FMT_YUYV:
+ ipu_ch_param_write_field(p, IPU_FIELD_BPP, 3); /* bits/pixel */
+ ipu_ch_param_write_field(p, IPU_FIELD_PFS, 0x8); /* pix format */
+ ipu_ch_param_write_field(p, IPU_FIELD_NPB, 31); /* burst size */
+ break;
+ }
+}
+EXPORT_SYMBOL_GPL(ipu_cpmem_set_yuv_interleaved);
+
void ipu_cpmem_set_yuv_planar_full(struct ipu_ch_param __iomem *p,
u32 pixel_format, int stride, int u_offset, int v_offset)
{
@@ -234,6 +251,11 @@
ipu_ch_param_write_field(p, IPU_FIELD_UBO, u_offset / 8);
ipu_ch_param_write_field(p, IPU_FIELD_VBO, v_offset / 8);
break;
+ case V4L2_PIX_FMT_YVU420:
+ ipu_ch_param_write_field(p, IPU_FIELD_SLUV, (stride / 2) - 1);
+ ipu_ch_param_write_field(p, IPU_FIELD_UBO, v_offset / 8);
+ ipu_ch_param_write_field(p, IPU_FIELD_VBO, u_offset / 8);
+ break;
}
}
EXPORT_SYMBOL_GPL(ipu_cpmem_set_yuv_planar_full);
@@ -246,10 +268,11 @@
switch (pixel_format) {
case V4L2_PIX_FMT_YUV420:
+ case V4L2_PIX_FMT_YVU420:
uv_stride = stride / 2;
u_offset = stride * height;
v_offset = u_offset + (uv_stride * height / 2);
- ipu_cpmem_set_yuv_planar_full(p, V4L2_PIX_FMT_YUV420, stride,
+ ipu_cpmem_set_yuv_planar_full(p, pixel_format, stride,
u_offset, v_offset);
break;
}
@@ -307,6 +330,7 @@
{
switch (pixelformat) {
case V4L2_PIX_FMT_YUV420:
+ case V4L2_PIX_FMT_YVU420:
/* pix format */
ipu_ch_param_write_field(cpmem, IPU_FIELD_PFS, 2);
/* burst size */
@@ -369,6 +393,7 @@
switch (pix->pixelformat) {
case V4L2_PIX_FMT_YUV420:
+ case V4L2_PIX_FMT_YVU420:
y_offset = Y_OFFSET(pix, image->rect.left, image->rect.top);
u_offset = U_OFFSET(pix, image->rect.left,
image->rect.top) - y_offset;
@@ -380,6 +405,7 @@
ipu_cpmem_set_buffer(cpmem, 0, image->phys + y_offset);
break;
case V4L2_PIX_FMT_UYVY:
+ case V4L2_PIX_FMT_YUYV:
ipu_cpmem_set_buffer(cpmem, 0, image->phys +
image->rect.left * 2 +
image->rect.top * image->pix.bytesperline);
@@ -413,8 +439,9 @@
{
switch (pixelformat) {
case V4L2_PIX_FMT_YUV420:
+ case V4L2_PIX_FMT_YVU420:
case V4L2_PIX_FMT_UYVY:
- case V4L2_PIX_FMT_YVYU:
+ case V4L2_PIX_FMT_YUYV:
return IPUV3_COLORSPACE_YUV;
case V4L2_PIX_FMT_RGB32:
case V4L2_PIX_FMT_BGR32:
@@ -646,8 +673,6 @@
cpu_relax();
}
- mdelay(300);
-
return 0;
}
@@ -988,7 +1013,7 @@
irq_free_descs(ipu->irq_start, IPU_NUM_IRQS);
}
-static int __devinit ipu_probe(struct platform_device *pdev)
+static int ipu_probe(struct platform_device *pdev)
{
const struct of_device_id *of_id =
of_match_device(imx_ipu_dt_ids, &pdev->dev);
@@ -1000,13 +1025,11 @@
devtype = of_id->data;
- dev_info(&pdev->dev, "Initializing %s\n", devtype->name);
-
irq_sync = platform_get_irq(pdev, 0);
irq_err = platform_get_irq(pdev, 1);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- dev_info(&pdev->dev, "irq_sync: %d irq_err: %d\n",
+ dev_dbg(&pdev->dev, "irq_sync: %d irq_err: %d\n",
irq_sync, irq_err);
if (!res || irq_sync < 0 || irq_err < 0)
@@ -1026,27 +1049,27 @@
spin_lock_init(&ipu->lock);
mutex_init(&ipu->channel_lock);
- dev_info(&pdev->dev, "cm_reg: 0x%08lx\n",
+ dev_dbg(&pdev->dev, "cm_reg: 0x%08lx\n",
ipu_base + devtype->cm_ofs);
- dev_info(&pdev->dev, "idmac: 0x%08lx\n",
+ dev_dbg(&pdev->dev, "idmac: 0x%08lx\n",
ipu_base + devtype->cm_ofs + IPU_CM_IDMAC_REG_OFS);
- dev_info(&pdev->dev, "cpmem: 0x%08lx\n",
+ dev_dbg(&pdev->dev, "cpmem: 0x%08lx\n",
ipu_base + devtype->cpmem_ofs);
- dev_info(&pdev->dev, "disp0: 0x%08lx\n",
+ dev_dbg(&pdev->dev, "disp0: 0x%08lx\n",
ipu_base + devtype->disp0_ofs);
- dev_info(&pdev->dev, "disp1: 0x%08lx\n",
+ dev_dbg(&pdev->dev, "disp1: 0x%08lx\n",
ipu_base + devtype->disp1_ofs);
- dev_info(&pdev->dev, "srm: 0x%08lx\n",
+ dev_dbg(&pdev->dev, "srm: 0x%08lx\n",
ipu_base + devtype->srm_ofs);
- dev_info(&pdev->dev, "tpm: 0x%08lx\n",
+ dev_dbg(&pdev->dev, "tpm: 0x%08lx\n",
ipu_base + devtype->tpm_ofs);
- dev_info(&pdev->dev, "dc: 0x%08lx\n",
+ dev_dbg(&pdev->dev, "dc: 0x%08lx\n",
ipu_base + devtype->cm_ofs + IPU_CM_DC_REG_OFS);
- dev_info(&pdev->dev, "ic: 0x%08lx\n",
+ dev_dbg(&pdev->dev, "ic: 0x%08lx\n",
ipu_base + devtype->cm_ofs + IPU_CM_IC_REG_OFS);
- dev_info(&pdev->dev, "dmfc: 0x%08lx\n",
+ dev_dbg(&pdev->dev, "dmfc: 0x%08lx\n",
ipu_base + devtype->cm_ofs + IPU_CM_DMFC_REG_OFS);
- dev_info(&pdev->dev, "vdi: 0x%08lx\n",
+ dev_dbg(&pdev->dev, "vdi: 0x%08lx\n",
ipu_base + devtype->vdi_ofs);
ipu->cm_reg = devm_ioremap(&pdev->dev,
@@ -1098,6 +1121,8 @@
goto failed_add_clients;
}
+ dev_info(&pdev->dev, "%s probed\n", devtype->name);
+
return 0;
failed_add_clients:
@@ -1111,7 +1136,7 @@
return ret;
}
-static int __devexit ipu_remove(struct platform_device *pdev)
+static int ipu_remove(struct platform_device *pdev)
{
struct ipu_soc *ipu = platform_get_drvdata(pdev);
struct resource *res;
@@ -1133,7 +1158,7 @@
.of_match_table = imx_ipu_dt_ids,
},
.probe = ipu_probe,
- .remove = __devexit_p(ipu_remove),
+ .remove = ipu_remove,
};
module_platform_driver(imx_ipu_driver);
diff --git a/drivers/staging/imx-drm/ipuv3-crtc.c b/drivers/staging/imx-drm/ipuv3-crtc.c
index 78d3eda..1892006 100644
--- a/drivers/staging/imx-drm/ipuv3-crtc.c
+++ b/drivers/staging/imx-drm/ipuv3-crtc.c
@@ -116,7 +116,7 @@
{
struct ipu_crtc *ipu_crtc = to_ipu_crtc(crtc);
- dev_info(ipu_crtc->dev, "%s mode: %d\n", __func__, mode);
+ dev_dbg(ipu_crtc->dev, "%s mode: %d\n", __func__, mode);
switch (mode) {
case DRM_MODE_DPMS_ON:
@@ -530,7 +530,7 @@
return ret;
}
-static int __devinit ipu_drm_probe(struct platform_device *pdev)
+static int ipu_drm_probe(struct platform_device *pdev)
{
struct ipu_client_platformdata *pdata = pdev->dev.platform_data;
struct ipu_crtc *ipu_crtc;
@@ -554,7 +554,7 @@
return 0;
}
-static int __devexit ipu_drm_remove(struct platform_device *pdev)
+static int ipu_drm_remove(struct platform_device *pdev)
{
struct ipu_crtc *ipu_crtc = platform_get_drvdata(pdev);
@@ -570,7 +570,7 @@
.name = "imx-ipuv3-crtc",
},
.probe = ipu_drm_probe,
- .remove = __devexit_p(ipu_drm_remove),
+ .remove = ipu_drm_remove,
};
module_platform_driver(ipu_drm_driver);
diff --git a/drivers/staging/imx-drm/parallel-display.c b/drivers/staging/imx-drm/parallel-display.c
index 9b51d73..a8064fc 100644
--- a/drivers/staging/imx-drm/parallel-display.c
+++ b/drivers/staging/imx-drm/parallel-display.c
@@ -23,6 +23,7 @@
#include <drm/drm_fb_helper.h>
#include <drm/drm_crtc_helper.h>
#include <linux/videodev2.h>
+#include <linux/pinctrl/consumer.h>
#include "imx-drm.h"
@@ -188,18 +189,27 @@
return 0;
}
-static int __devinit imx_pd_probe(struct platform_device *pdev)
+static int imx_pd_probe(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
const u8 *edidp;
struct imx_parallel_display *imxpd;
int ret;
const char *fmt;
+ struct pinctrl *pinctrl;
imxpd = devm_kzalloc(&pdev->dev, sizeof(*imxpd), GFP_KERNEL);
if (!imxpd)
return -ENOMEM;
+ pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
+ if (IS_ERR(pinctrl)) {
+ ret = PTR_ERR(pinctrl);
+ dev_warn(&pdev->dev, "pinctrl_get_select_default failed with %d",
+ ret);
+ return ret;
+ }
+
edidp = of_get_property(np, "edid", &imxpd->edid_len);
if (edidp)
imxpd->edid = kmemdup(edidp, imxpd->edid_len, GFP_KERNEL);
@@ -225,7 +235,7 @@
return 0;
}
-static int __devexit imx_pd_remove(struct platform_device *pdev)
+static int imx_pd_remove(struct platform_device *pdev)
{
struct imx_parallel_display *imxpd = platform_get_drvdata(pdev);
struct drm_connector *connector = &imxpd->connector;
@@ -246,7 +256,7 @@
static struct platform_driver imx_pd_driver = {
.probe = imx_pd_probe,
- .remove = __devexit_p(imx_pd_remove),
+ .remove = imx_pd_remove,
.driver = {
.of_match_table = imx_pd_dt_ids,
.name = "imx-parallel-display",
diff --git a/drivers/staging/ipack/Kconfig b/drivers/staging/ipack/Kconfig
deleted file mode 100644
index 4cf4706..0000000
--- a/drivers/staging/ipack/Kconfig
+++ /dev/null
@@ -1,21 +0,0 @@
-#
-# IPACK configuration.
-#
-
-menuconfig IPACK_BUS
- tristate "IndustryPack bus support"
- depends on HAS_IOMEM
- ---help---
- If you say Y here you get support for the IndustryPack Framework
- for drivers for many types of boards that support this industrial
- bus. The IndustryPack Framework is a virtual bus allowing to
- communicate between carrier and mezzanine cards connected through
- this bus.
-
-if IPACK_BUS
-
-source "drivers/staging/ipack/bridges/Kconfig"
-
-source "drivers/staging/ipack/devices/Kconfig"
-
-endif # IPACK
diff --git a/drivers/staging/ipack/TODO b/drivers/staging/ipack/TODO
deleted file mode 100644
index ffafe69..0000000
--- a/drivers/staging/ipack/TODO
+++ /dev/null
@@ -1,22 +0,0 @@
- TODO
- ====
-Introduction
-============
-
-These drivers add support for IndustryPack devices: carrier and IP module
-boards.
-
-The ipack driver is just an abstraction of the bus providing the common
-operations between the two kind of boards.
-
-TODO
-====
-
-checkpatch.pl warnings
-cleanup
-
-Contact
-=======
-
-Contact: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
-Mailing List: industrypack-devel@lists.sourceforge.net
diff --git a/drivers/staging/ipack/bridges/Kconfig b/drivers/staging/ipack/bridges/Kconfig
deleted file mode 100644
index 97c837e..0000000
--- a/drivers/staging/ipack/bridges/Kconfig
+++ /dev/null
@@ -1,8 +0,0 @@
-config BOARD_TPCI200
- tristate "TEWS TPCI-200 support for IndustryPack bus"
- depends on IPACK_BUS
- depends on PCI
- help
- This driver supports the TEWS TPCI200 device for the IndustryPack bus.
- default n
-
diff --git a/drivers/staging/ipack/ipack_ids.h b/drivers/staging/ipack/ipack_ids.h
deleted file mode 100644
index 8153fee..0000000
--- a/drivers/staging/ipack/ipack_ids.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * IndustryPack Fromat, Vendor and Device IDs.
- */
-
-/* ID section format versions */
-#define IPACK_ID_VERSION_INVALID 0x00
-#define IPACK_ID_VERSION_1 0x01
-#define IPACK_ID_VERSION_2 0x02
-
-/* Vendors and devices. Sort key: vendor first, device next. */
-#define IPACK1_VENDOR_ID_RESERVED1 0x00
-#define IPACK1_VENDOR_ID_RESERVED2 0xFF
-#define IPACK1_VENDOR_ID_UNREGISTRED01 0x01
-#define IPACK1_VENDOR_ID_UNREGISTRED02 0x02
-#define IPACK1_VENDOR_ID_UNREGISTRED03 0x03
-#define IPACK1_VENDOR_ID_UNREGISTRED04 0x04
-#define IPACK1_VENDOR_ID_UNREGISTRED05 0x05
-#define IPACK1_VENDOR_ID_UNREGISTRED06 0x06
-#define IPACK1_VENDOR_ID_UNREGISTRED07 0x07
-#define IPACK1_VENDOR_ID_UNREGISTRED08 0x08
-#define IPACK1_VENDOR_ID_UNREGISTRED09 0x09
-#define IPACK1_VENDOR_ID_UNREGISTRED10 0x0A
-#define IPACK1_VENDOR_ID_UNREGISTRED11 0x0B
-#define IPACK1_VENDOR_ID_UNREGISTRED12 0x0C
-#define IPACK1_VENDOR_ID_UNREGISTRED13 0x0D
-#define IPACK1_VENDOR_ID_UNREGISTRED14 0x0E
-#define IPACK1_VENDOR_ID_UNREGISTRED15 0x0F
-
-#define IPACK1_VENDOR_ID_SBS 0xF0
-#define IPACK1_DEVICE_ID_SBS_OCTAL_232 0x22
-#define IPACK1_DEVICE_ID_SBS_OCTAL_422 0x2A
-#define IPACK1_DEVICE_ID_SBS_OCTAL_485 0x48
diff --git a/drivers/staging/line6/Kconfig b/drivers/staging/line6/Kconfig
index 43120ff..b635436 100644
--- a/drivers/staging/line6/Kconfig
+++ b/drivers/staging/line6/Kconfig
@@ -23,32 +23,6 @@
if LINE6_USB
-config LINE6_USB_DEBUG
- bool "print debug messages"
- default n
- help
- Say Y here to write debug messages to the syslog.
-
- If unsure, say N.
-
-config LINE6_USB_DUMP_CTRL
- bool "dump control messages"
- default n
- help
- Say Y here to write control messages sent to and received from
- Line6 devices to the syslog.
-
- If unsure, say N.
-
-config LINE6_USB_DUMP_MIDI
- bool "dump MIDI messages"
- default n
- help
- Say Y here to write MIDI messages sent to and received from
- Line6 devices to the syslog.
-
- If unsure, say N.
-
config LINE6_USB_DUMP_PCM
bool "dump PCM data"
default n
@@ -59,17 +33,6 @@
If unsure, say N.
-config LINE6_USB_RAW
- bool "raw data communication"
- default n
- help
- Say Y here to create special files which allow to send raw data
- to the device. This bypasses any sanity checks, so if you discover
- the code to erase the firmware, feel free to render your device
- useless, but only after reading the GPL section "NO WARRANTY".
-
- If unsure, say N.
-
config LINE6_USB_IMPULSE_RESPONSE
bool "measure impulse response"
default n
diff --git a/drivers/staging/line6/Makefile b/drivers/staging/line6/Makefile
index 34a2dda..ae5c374 100644
--- a/drivers/staging/line6/Makefile
+++ b/drivers/staging/line6/Makefile
@@ -3,9 +3,7 @@
line6usb-y := \
audio.o \
capture.o \
- control.o \
driver.o \
- dumprequest.o \
midi.o \
midibuf.o \
pcm.o \
diff --git a/drivers/staging/line6/audio.c b/drivers/staging/line6/audio.c
index 8e73983..a92e21f 100644
--- a/drivers/staging/line6/audio.c
+++ b/drivers/staging/line6/audio.c
@@ -16,20 +16,16 @@
#include "driver.h"
#include "audio.h"
-static int line6_index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX;
-static char *line6_id[SNDRV_CARDS] = SNDRV_DEFAULT_STR;
-
/*
Initialize the Line6 USB audio system.
*/
int line6_init_audio(struct usb_line6 *line6)
{
- static int dev;
struct snd_card *card;
int err;
- err = snd_card_create(line6_index[dev], line6_id[dev], THIS_MODULE, 0,
- &card);
+ err = snd_card_create(SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1,
+ THIS_MODULE, 0, &card);
if (err < 0)
return err;
diff --git a/drivers/staging/line6/capture.c b/drivers/staging/line6/capture.c
index c85c5b6..389c41f 100644
--- a/drivers/staging/line6/capture.c
+++ b/drivers/staging/line6/capture.c
@@ -256,8 +256,8 @@
#ifdef CONFIG_LINE6_USB_IMPULSE_RESPONSE
if (!(line6pcm->flags & LINE6_BITS_PCM_IMPULSE))
#endif
- if (test_bit(LINE6_INDEX_PCM_ALSA_CAPTURE_STREAM, &line6pcm->flags)
- && (fsize > 0))
+ if (test_bit(LINE6_INDEX_PCM_ALSA_CAPTURE_STREAM,
+ &line6pcm->flags) && (fsize > 0))
line6_capture_copy(line6pcm, fbuf, fsize);
}
@@ -274,7 +274,8 @@
#ifdef CONFIG_LINE6_USB_IMPULSE_RESPONSE
if (!(line6pcm->flags & LINE6_BITS_PCM_IMPULSE))
#endif
- if (test_bit(LINE6_INDEX_PCM_ALSA_CAPTURE_STREAM, &line6pcm->flags))
+ if (test_bit(LINE6_INDEX_PCM_ALSA_CAPTURE_STREAM,
+ &line6pcm->flags))
line6_capture_check_period(line6pcm, length);
}
}
@@ -356,7 +357,8 @@
#ifdef CONFIG_PM
case SNDRV_PCM_TRIGGER_RESUME:
#endif
- err = line6_pcm_acquire(line6pcm, LINE6_BIT_PCM_ALSA_CAPTURE_STREAM);
+ err = line6_pcm_acquire(line6pcm,
+ LINE6_BIT_PCM_ALSA_CAPTURE_STREAM);
if (err < 0)
return err;
@@ -367,7 +369,8 @@
#ifdef CONFIG_PM
case SNDRV_PCM_TRIGGER_SUSPEND:
#endif
- err = line6_pcm_release(line6pcm, LINE6_BIT_PCM_ALSA_CAPTURE_STREAM);
+ err = line6_pcm_release(line6pcm,
+ LINE6_BIT_PCM_ALSA_CAPTURE_STREAM);
if (err < 0)
return err;
diff --git a/drivers/staging/line6/control.c b/drivers/staging/line6/control.c
deleted file mode 100644
index f8326f5..0000000
--- a/drivers/staging/line6/control.c
+++ /dev/null
@@ -1,995 +0,0 @@
-/*
- * Line6 Linux USB driver - 0.9.1beta
- *
- * Copyright (C) 2004-2010 Markus Grabner (grabner@icg.tugraz.at)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation, version 2.
- *
- */
-
-#include <linux/usb.h>
-
-#include "control.h"
-#include "driver.h"
-#include "pod.h"
-#include "usbdefs.h"
-#include "variax.h"
-
-#define DEVICE_ATTR2(_name1, _name2, _mode, _show, _store) \
-struct device_attribute dev_attr_##_name1 = __ATTR(_name2, _mode, _show, _store)
-
-#define LINE6_PARAM_R(PREFIX, prefix, type, param) \
-static ssize_t prefix##_get_##param(struct device *dev, \
- struct device_attribute *attr, char *buf) \
-{ \
- return prefix##_get_param_##type(dev, buf, PREFIX##_##param); \
-}
-
-#define LINE6_PARAM_RW(PREFIX, prefix, type, param) \
-LINE6_PARAM_R(PREFIX, prefix, type, param); \
-static ssize_t prefix##_set_##param(struct device *dev, \
- struct device_attribute *attr, const char *buf, size_t count) \
-{ \
- return prefix##_set_param_##type(dev, buf, count, PREFIX##_##param); \
-}
-
-#define POD_PARAM_R(type, param) LINE6_PARAM_R(POD, pod, type, param)
-#define POD_PARAM_RW(type, param) LINE6_PARAM_RW(POD, pod, type, param)
-#define VARIAX_PARAM_R(type, param) LINE6_PARAM_R(VARIAX, variax, type, param)
-#define VARIAX_PARAM_RW(type, param) LINE6_PARAM_RW(VARIAX, variax, type, param)
-
-static ssize_t pod_get_param_int(struct device *dev, char *buf, int param)
-{
- struct usb_interface *interface = to_usb_interface(dev);
- struct usb_line6_pod *pod = usb_get_intfdata(interface);
- int retval = line6_dump_wait_interruptible(&pod->dumpreq);
- if (retval < 0)
- return retval;
- return sprintf(buf, "%d\n", pod->prog_data.control[param]);
-}
-
-static ssize_t pod_set_param_int(struct device *dev, const char *buf,
- size_t count, int param)
-{
- struct usb_interface *interface = to_usb_interface(dev);
- struct usb_line6_pod *pod = usb_get_intfdata(interface);
- u8 value;
- int retval;
-
- retval = kstrtou8(buf, 10, &value);
- if (retval)
- return retval;
-
- line6_pod_transmit_parameter(pod, param, value);
- return count;
-}
-
-static ssize_t variax_get_param_int(struct device *dev, char *buf, int param)
-{
- struct usb_interface *interface = to_usb_interface(dev);
- struct usb_line6_variax *variax = usb_get_intfdata(interface);
- int retval = line6_dump_wait_interruptible(&variax->dumpreq);
- if (retval < 0)
- return retval;
- return sprintf(buf, "%d\n", variax->model_data.control[param]);
-}
-
-static ssize_t variax_get_param_float(struct device *dev, char *buf, int param)
-{
- /*
- We do our own floating point handling here since at the time
- this code was written (Jan 2006) it was highly discouraged to
- use floating point arithmetic in the kernel. If you think that
- this no longer applies, feel free to replace this by generic
- floating point code.
- */
-
- static const int BIAS = 0x7f;
- static const int OFFSET = 0xf;
- static const int PRECISION = 1000;
-
- int len = 0;
- unsigned part_int, part_frac;
- struct usb_interface *interface = to_usb_interface(dev);
- struct usb_line6_variax *variax = usb_get_intfdata(interface);
- const unsigned char *p = variax->model_data.control + param;
- int retval = line6_dump_wait_interruptible(&variax->dumpreq);
- if (retval < 0)
- return retval;
-
- if ((p[0] == 0) && (p[1] == 0) && (p[2] == 0))
- part_int = part_frac = 0;
- else {
- int exponent = (((p[0] & 0x7f) << 1) | (p[1] >> 7)) - BIAS;
- unsigned mantissa = (p[1] << 8) | p[2] | 0x8000;
- exponent -= OFFSET;
-
- if (exponent >= 0) {
- part_int = mantissa << exponent;
- part_frac = 0;
- } else {
- part_int = mantissa >> -exponent;
- part_frac = (mantissa << (32 + exponent)) & 0xffffffff;
- }
-
- part_frac =
- (part_frac / ((1UL << 31) / (PRECISION / 2 * 10)) + 5) / 10;
- }
-
- len +=
- sprintf(buf + len, "%s%d.%03d\n", ((p[0] & 0x80) ? "-" : ""),
- part_int, part_frac);
- return len;
-}
-
-POD_PARAM_RW(int, tweak);
-POD_PARAM_RW(int, wah_position);
-POD_PARAM_RW(int, compression_gain);
-POD_PARAM_RW(int, vol_pedal_position);
-POD_PARAM_RW(int, compression_threshold);
-POD_PARAM_RW(int, pan);
-POD_PARAM_RW(int, amp_model_setup);
-POD_PARAM_RW(int, amp_model);
-POD_PARAM_RW(int, drive);
-POD_PARAM_RW(int, bass);
-POD_PARAM_RW(int, mid);
-POD_PARAM_RW(int, lowmid);
-POD_PARAM_RW(int, treble);
-POD_PARAM_RW(int, highmid);
-POD_PARAM_RW(int, chan_vol);
-POD_PARAM_RW(int, reverb_mix);
-POD_PARAM_RW(int, effect_setup);
-POD_PARAM_RW(int, band_1_frequency);
-POD_PARAM_RW(int, presence);
-POD_PARAM_RW(int, treble__bass);
-POD_PARAM_RW(int, noise_gate_enable);
-POD_PARAM_RW(int, gate_threshold);
-POD_PARAM_RW(int, gate_decay_time);
-POD_PARAM_RW(int, stomp_enable);
-POD_PARAM_RW(int, comp_enable);
-POD_PARAM_RW(int, stomp_time);
-POD_PARAM_RW(int, delay_enable);
-POD_PARAM_RW(int, mod_param_1);
-POD_PARAM_RW(int, delay_param_1);
-POD_PARAM_RW(int, delay_param_1_note_value);
-POD_PARAM_RW(int, band_2_frequency__bass);
-POD_PARAM_RW(int, delay_param_2);
-POD_PARAM_RW(int, delay_volume_mix);
-POD_PARAM_RW(int, delay_param_3);
-POD_PARAM_RW(int, reverb_enable);
-POD_PARAM_RW(int, reverb_type);
-POD_PARAM_RW(int, reverb_decay);
-POD_PARAM_RW(int, reverb_tone);
-POD_PARAM_RW(int, reverb_pre_delay);
-POD_PARAM_RW(int, reverb_pre_post);
-POD_PARAM_RW(int, band_2_frequency);
-POD_PARAM_RW(int, band_3_frequency__bass);
-POD_PARAM_RW(int, wah_enable);
-POD_PARAM_RW(int, modulation_lo_cut);
-POD_PARAM_RW(int, delay_reverb_lo_cut);
-POD_PARAM_RW(int, volume_pedal_minimum);
-POD_PARAM_RW(int, eq_pre_post);
-POD_PARAM_RW(int, volume_pre_post);
-POD_PARAM_RW(int, di_model);
-POD_PARAM_RW(int, di_delay);
-POD_PARAM_RW(int, mod_enable);
-POD_PARAM_RW(int, mod_param_1_note_value);
-POD_PARAM_RW(int, mod_param_2);
-POD_PARAM_RW(int, mod_param_3);
-POD_PARAM_RW(int, mod_param_4);
-POD_PARAM_RW(int, mod_param_5);
-POD_PARAM_RW(int, mod_volume_mix);
-POD_PARAM_RW(int, mod_pre_post);
-POD_PARAM_RW(int, modulation_model);
-POD_PARAM_RW(int, band_3_frequency);
-POD_PARAM_RW(int, band_4_frequency__bass);
-POD_PARAM_RW(int, mod_param_1_double_precision);
-POD_PARAM_RW(int, delay_param_1_double_precision);
-POD_PARAM_RW(int, eq_enable);
-POD_PARAM_RW(int, tap);
-POD_PARAM_RW(int, volume_tweak_pedal_assign);
-POD_PARAM_RW(int, band_5_frequency);
-POD_PARAM_RW(int, tuner);
-POD_PARAM_RW(int, mic_selection);
-POD_PARAM_RW(int, cabinet_model);
-POD_PARAM_RW(int, stomp_model);
-POD_PARAM_RW(int, roomlevel);
-POD_PARAM_RW(int, band_4_frequency);
-POD_PARAM_RW(int, band_6_frequency);
-POD_PARAM_RW(int, stomp_param_1_note_value);
-POD_PARAM_RW(int, stomp_param_2);
-POD_PARAM_RW(int, stomp_param_3);
-POD_PARAM_RW(int, stomp_param_4);
-POD_PARAM_RW(int, stomp_param_5);
-POD_PARAM_RW(int, stomp_param_6);
-POD_PARAM_RW(int, amp_switch_select);
-POD_PARAM_RW(int, delay_param_4);
-POD_PARAM_RW(int, delay_param_5);
-POD_PARAM_RW(int, delay_pre_post);
-POD_PARAM_RW(int, delay_model);
-POD_PARAM_RW(int, delay_verb_model);
-POD_PARAM_RW(int, tempo_msb);
-POD_PARAM_RW(int, tempo_lsb);
-POD_PARAM_RW(int, wah_model);
-POD_PARAM_RW(int, bypass_volume);
-POD_PARAM_RW(int, fx_loop_on_off);
-POD_PARAM_RW(int, tweak_param_select);
-POD_PARAM_RW(int, amp1_engage);
-POD_PARAM_RW(int, band_1_gain);
-POD_PARAM_RW(int, band_2_gain__bass);
-POD_PARAM_RW(int, band_2_gain);
-POD_PARAM_RW(int, band_3_gain__bass);
-POD_PARAM_RW(int, band_3_gain);
-POD_PARAM_RW(int, band_4_gain__bass);
-POD_PARAM_RW(int, band_5_gain__bass);
-POD_PARAM_RW(int, band_4_gain);
-POD_PARAM_RW(int, band_6_gain__bass);
-VARIAX_PARAM_R(int, body);
-VARIAX_PARAM_R(int, pickup1_enable);
-VARIAX_PARAM_R(int, pickup1_type);
-VARIAX_PARAM_R(float, pickup1_position);
-VARIAX_PARAM_R(float, pickup1_angle);
-VARIAX_PARAM_R(float, pickup1_level);
-VARIAX_PARAM_R(int, pickup2_enable);
-VARIAX_PARAM_R(int, pickup2_type);
-VARIAX_PARAM_R(float, pickup2_position);
-VARIAX_PARAM_R(float, pickup2_angle);
-VARIAX_PARAM_R(float, pickup2_level);
-VARIAX_PARAM_R(int, pickup_phase);
-VARIAX_PARAM_R(float, capacitance);
-VARIAX_PARAM_R(float, tone_resistance);
-VARIAX_PARAM_R(float, volume_resistance);
-VARIAX_PARAM_R(int, taper);
-VARIAX_PARAM_R(float, tone_dump);
-VARIAX_PARAM_R(int, save_tone);
-VARIAX_PARAM_R(float, volume_dump);
-VARIAX_PARAM_R(int, tuning_enable);
-VARIAX_PARAM_R(int, tuning6);
-VARIAX_PARAM_R(int, tuning5);
-VARIAX_PARAM_R(int, tuning4);
-VARIAX_PARAM_R(int, tuning3);
-VARIAX_PARAM_R(int, tuning2);
-VARIAX_PARAM_R(int, tuning1);
-VARIAX_PARAM_R(float, detune6);
-VARIAX_PARAM_R(float, detune5);
-VARIAX_PARAM_R(float, detune4);
-VARIAX_PARAM_R(float, detune3);
-VARIAX_PARAM_R(float, detune2);
-VARIAX_PARAM_R(float, detune1);
-VARIAX_PARAM_R(float, mix6);
-VARIAX_PARAM_R(float, mix5);
-VARIAX_PARAM_R(float, mix4);
-VARIAX_PARAM_R(float, mix3);
-VARIAX_PARAM_R(float, mix2);
-VARIAX_PARAM_R(float, mix1);
-VARIAX_PARAM_R(int, pickup_wiring);
-
-static DEVICE_ATTR(tweak, S_IWUSR | S_IRUGO, pod_get_tweak, pod_set_tweak);
-static DEVICE_ATTR(wah_position, S_IWUSR | S_IRUGO, pod_get_wah_position,
- pod_set_wah_position);
-static DEVICE_ATTR(compression_gain, S_IWUSR | S_IRUGO,
- pod_get_compression_gain, pod_set_compression_gain);
-static DEVICE_ATTR(vol_pedal_position, S_IWUSR | S_IRUGO,
- pod_get_vol_pedal_position, pod_set_vol_pedal_position);
-static DEVICE_ATTR(compression_threshold, S_IWUSR | S_IRUGO,
- pod_get_compression_threshold,
- pod_set_compression_threshold);
-static DEVICE_ATTR(pan, S_IWUSR | S_IRUGO, pod_get_pan, pod_set_pan);
-static DEVICE_ATTR(amp_model_setup, S_IWUSR | S_IRUGO, pod_get_amp_model_setup,
- pod_set_amp_model_setup);
-static DEVICE_ATTR(amp_model, S_IWUSR | S_IRUGO, pod_get_amp_model,
- pod_set_amp_model);
-static DEVICE_ATTR(drive, S_IWUSR | S_IRUGO, pod_get_drive, pod_set_drive);
-static DEVICE_ATTR(bass, S_IWUSR | S_IRUGO, pod_get_bass, pod_set_bass);
-static DEVICE_ATTR(mid, S_IWUSR | S_IRUGO, pod_get_mid, pod_set_mid);
-static DEVICE_ATTR(lowmid, S_IWUSR | S_IRUGO, pod_get_lowmid, pod_set_lowmid);
-static DEVICE_ATTR(treble, S_IWUSR | S_IRUGO, pod_get_treble, pod_set_treble);
-static DEVICE_ATTR(highmid, S_IWUSR | S_IRUGO, pod_get_highmid,
- pod_set_highmid);
-static DEVICE_ATTR(chan_vol, S_IWUSR | S_IRUGO, pod_get_chan_vol,
- pod_set_chan_vol);
-static DEVICE_ATTR(reverb_mix, S_IWUSR | S_IRUGO, pod_get_reverb_mix,
- pod_set_reverb_mix);
-static DEVICE_ATTR(effect_setup, S_IWUSR | S_IRUGO, pod_get_effect_setup,
- pod_set_effect_setup);
-static DEVICE_ATTR(band_1_frequency, S_IWUSR | S_IRUGO,
- pod_get_band_1_frequency, pod_set_band_1_frequency);
-static DEVICE_ATTR(presence, S_IWUSR | S_IRUGO, pod_get_presence,
- pod_set_presence);
-static DEVICE_ATTR2(treble__bass, treble, S_IWUSR | S_IRUGO,
- pod_get_treble__bass, pod_set_treble__bass);
-static DEVICE_ATTR(noise_gate_enable, S_IWUSR | S_IRUGO,
- pod_get_noise_gate_enable, pod_set_noise_gate_enable);
-static DEVICE_ATTR(gate_threshold, S_IWUSR | S_IRUGO, pod_get_gate_threshold,
- pod_set_gate_threshold);
-static DEVICE_ATTR(gate_decay_time, S_IWUSR | S_IRUGO, pod_get_gate_decay_time,
- pod_set_gate_decay_time);
-static DEVICE_ATTR(stomp_enable, S_IWUSR | S_IRUGO, pod_get_stomp_enable,
- pod_set_stomp_enable);
-static DEVICE_ATTR(comp_enable, S_IWUSR | S_IRUGO, pod_get_comp_enable,
- pod_set_comp_enable);
-static DEVICE_ATTR(stomp_time, S_IWUSR | S_IRUGO, pod_get_stomp_time,
- pod_set_stomp_time);
-static DEVICE_ATTR(delay_enable, S_IWUSR | S_IRUGO, pod_get_delay_enable,
- pod_set_delay_enable);
-static DEVICE_ATTR(mod_param_1, S_IWUSR | S_IRUGO, pod_get_mod_param_1,
- pod_set_mod_param_1);
-static DEVICE_ATTR(delay_param_1, S_IWUSR | S_IRUGO, pod_get_delay_param_1,
- pod_set_delay_param_1);
-static DEVICE_ATTR(delay_param_1_note_value, S_IWUSR | S_IRUGO,
- pod_get_delay_param_1_note_value,
- pod_set_delay_param_1_note_value);
-static DEVICE_ATTR2(band_2_frequency__bass, band_2_frequency, S_IWUSR | S_IRUGO,
- pod_get_band_2_frequency__bass,
- pod_set_band_2_frequency__bass);
-static DEVICE_ATTR(delay_param_2, S_IWUSR | S_IRUGO, pod_get_delay_param_2,
- pod_set_delay_param_2);
-static DEVICE_ATTR(delay_volume_mix, S_IWUSR | S_IRUGO,
- pod_get_delay_volume_mix, pod_set_delay_volume_mix);
-static DEVICE_ATTR(delay_param_3, S_IWUSR | S_IRUGO, pod_get_delay_param_3,
- pod_set_delay_param_3);
-static DEVICE_ATTR(reverb_enable, S_IWUSR | S_IRUGO, pod_get_reverb_enable,
- pod_set_reverb_enable);
-static DEVICE_ATTR(reverb_type, S_IWUSR | S_IRUGO, pod_get_reverb_type,
- pod_set_reverb_type);
-static DEVICE_ATTR(reverb_decay, S_IWUSR | S_IRUGO, pod_get_reverb_decay,
- pod_set_reverb_decay);
-static DEVICE_ATTR(reverb_tone, S_IWUSR | S_IRUGO, pod_get_reverb_tone,
- pod_set_reverb_tone);
-static DEVICE_ATTR(reverb_pre_delay, S_IWUSR | S_IRUGO,
- pod_get_reverb_pre_delay, pod_set_reverb_pre_delay);
-static DEVICE_ATTR(reverb_pre_post, S_IWUSR | S_IRUGO, pod_get_reverb_pre_post,
- pod_set_reverb_pre_post);
-static DEVICE_ATTR(band_2_frequency, S_IWUSR | S_IRUGO,
- pod_get_band_2_frequency, pod_set_band_2_frequency);
-static DEVICE_ATTR2(band_3_frequency__bass, band_3_frequency, S_IWUSR | S_IRUGO,
- pod_get_band_3_frequency__bass,
- pod_set_band_3_frequency__bass);
-static DEVICE_ATTR(wah_enable, S_IWUSR | S_IRUGO, pod_get_wah_enable,
- pod_set_wah_enable);
-static DEVICE_ATTR(modulation_lo_cut, S_IWUSR | S_IRUGO,
- pod_get_modulation_lo_cut, pod_set_modulation_lo_cut);
-static DEVICE_ATTR(delay_reverb_lo_cut, S_IWUSR | S_IRUGO,
- pod_get_delay_reverb_lo_cut, pod_set_delay_reverb_lo_cut);
-static DEVICE_ATTR(volume_pedal_minimum, S_IWUSR | S_IRUGO,
- pod_get_volume_pedal_minimum, pod_set_volume_pedal_minimum);
-static DEVICE_ATTR(eq_pre_post, S_IWUSR | S_IRUGO, pod_get_eq_pre_post,
- pod_set_eq_pre_post);
-static DEVICE_ATTR(volume_pre_post, S_IWUSR | S_IRUGO, pod_get_volume_pre_post,
- pod_set_volume_pre_post);
-static DEVICE_ATTR(di_model, S_IWUSR | S_IRUGO, pod_get_di_model,
- pod_set_di_model);
-static DEVICE_ATTR(di_delay, S_IWUSR | S_IRUGO, pod_get_di_delay,
- pod_set_di_delay);
-static DEVICE_ATTR(mod_enable, S_IWUSR | S_IRUGO, pod_get_mod_enable,
- pod_set_mod_enable);
-static DEVICE_ATTR(mod_param_1_note_value, S_IWUSR | S_IRUGO,
- pod_get_mod_param_1_note_value,
- pod_set_mod_param_1_note_value);
-static DEVICE_ATTR(mod_param_2, S_IWUSR | S_IRUGO, pod_get_mod_param_2,
- pod_set_mod_param_2);
-static DEVICE_ATTR(mod_param_3, S_IWUSR | S_IRUGO, pod_get_mod_param_3,
- pod_set_mod_param_3);
-static DEVICE_ATTR(mod_param_4, S_IWUSR | S_IRUGO, pod_get_mod_param_4,
- pod_set_mod_param_4);
-static DEVICE_ATTR(mod_param_5, S_IWUSR | S_IRUGO, pod_get_mod_param_5,
- pod_set_mod_param_5);
-static DEVICE_ATTR(mod_volume_mix, S_IWUSR | S_IRUGO, pod_get_mod_volume_mix,
- pod_set_mod_volume_mix);
-static DEVICE_ATTR(mod_pre_post, S_IWUSR | S_IRUGO, pod_get_mod_pre_post,
- pod_set_mod_pre_post);
-static DEVICE_ATTR(modulation_model, S_IWUSR | S_IRUGO,
- pod_get_modulation_model, pod_set_modulation_model);
-static DEVICE_ATTR(band_3_frequency, S_IWUSR | S_IRUGO,
- pod_get_band_3_frequency, pod_set_band_3_frequency);
-static DEVICE_ATTR2(band_4_frequency__bass, band_4_frequency, S_IWUSR | S_IRUGO,
- pod_get_band_4_frequency__bass,
- pod_set_band_4_frequency__bass);
-static DEVICE_ATTR(mod_param_1_double_precision, S_IWUSR | S_IRUGO,
- pod_get_mod_param_1_double_precision,
- pod_set_mod_param_1_double_precision);
-static DEVICE_ATTR(delay_param_1_double_precision, S_IWUSR | S_IRUGO,
- pod_get_delay_param_1_double_precision,
- pod_set_delay_param_1_double_precision);
-static DEVICE_ATTR(eq_enable, S_IWUSR | S_IRUGO, pod_get_eq_enable,
- pod_set_eq_enable);
-static DEVICE_ATTR(tap, S_IWUSR | S_IRUGO, pod_get_tap, pod_set_tap);
-static DEVICE_ATTR(volume_tweak_pedal_assign, S_IWUSR | S_IRUGO,
- pod_get_volume_tweak_pedal_assign,
- pod_set_volume_tweak_pedal_assign);
-static DEVICE_ATTR(band_5_frequency, S_IWUSR | S_IRUGO,
- pod_get_band_5_frequency, pod_set_band_5_frequency);
-static DEVICE_ATTR(tuner, S_IWUSR | S_IRUGO, pod_get_tuner, pod_set_tuner);
-static DEVICE_ATTR(mic_selection, S_IWUSR | S_IRUGO, pod_get_mic_selection,
- pod_set_mic_selection);
-static DEVICE_ATTR(cabinet_model, S_IWUSR | S_IRUGO, pod_get_cabinet_model,
- pod_set_cabinet_model);
-static DEVICE_ATTR(stomp_model, S_IWUSR | S_IRUGO, pod_get_stomp_model,
- pod_set_stomp_model);
-static DEVICE_ATTR(roomlevel, S_IWUSR | S_IRUGO, pod_get_roomlevel,
- pod_set_roomlevel);
-static DEVICE_ATTR(band_4_frequency, S_IWUSR | S_IRUGO,
- pod_get_band_4_frequency, pod_set_band_4_frequency);
-static DEVICE_ATTR(band_6_frequency, S_IWUSR | S_IRUGO,
- pod_get_band_6_frequency, pod_set_band_6_frequency);
-static DEVICE_ATTR(stomp_param_1_note_value, S_IWUSR | S_IRUGO,
- pod_get_stomp_param_1_note_value,
- pod_set_stomp_param_1_note_value);
-static DEVICE_ATTR(stomp_param_2, S_IWUSR | S_IRUGO, pod_get_stomp_param_2,
- pod_set_stomp_param_2);
-static DEVICE_ATTR(stomp_param_3, S_IWUSR | S_IRUGO, pod_get_stomp_param_3,
- pod_set_stomp_param_3);
-static DEVICE_ATTR(stomp_param_4, S_IWUSR | S_IRUGO, pod_get_stomp_param_4,
- pod_set_stomp_param_4);
-static DEVICE_ATTR(stomp_param_5, S_IWUSR | S_IRUGO, pod_get_stomp_param_5,
- pod_set_stomp_param_5);
-static DEVICE_ATTR(stomp_param_6, S_IWUSR | S_IRUGO, pod_get_stomp_param_6,
- pod_set_stomp_param_6);
-static DEVICE_ATTR(amp_switch_select, S_IWUSR | S_IRUGO,
- pod_get_amp_switch_select, pod_set_amp_switch_select);
-static DEVICE_ATTR(delay_param_4, S_IWUSR | S_IRUGO, pod_get_delay_param_4,
- pod_set_delay_param_4);
-static DEVICE_ATTR(delay_param_5, S_IWUSR | S_IRUGO, pod_get_delay_param_5,
- pod_set_delay_param_5);
-static DEVICE_ATTR(delay_pre_post, S_IWUSR | S_IRUGO, pod_get_delay_pre_post,
- pod_set_delay_pre_post);
-static DEVICE_ATTR(delay_model, S_IWUSR | S_IRUGO, pod_get_delay_model,
- pod_set_delay_model);
-static DEVICE_ATTR(delay_verb_model, S_IWUSR | S_IRUGO,
- pod_get_delay_verb_model, pod_set_delay_verb_model);
-static DEVICE_ATTR(tempo_msb, S_IWUSR | S_IRUGO, pod_get_tempo_msb,
- pod_set_tempo_msb);
-static DEVICE_ATTR(tempo_lsb, S_IWUSR | S_IRUGO, pod_get_tempo_lsb,
- pod_set_tempo_lsb);
-static DEVICE_ATTR(wah_model, S_IWUSR | S_IRUGO, pod_get_wah_model,
- pod_set_wah_model);
-static DEVICE_ATTR(bypass_volume, S_IWUSR | S_IRUGO, pod_get_bypass_volume,
- pod_set_bypass_volume);
-static DEVICE_ATTR(fx_loop_on_off, S_IWUSR | S_IRUGO, pod_get_fx_loop_on_off,
- pod_set_fx_loop_on_off);
-static DEVICE_ATTR(tweak_param_select, S_IWUSR | S_IRUGO,
- pod_get_tweak_param_select, pod_set_tweak_param_select);
-static DEVICE_ATTR(amp1_engage, S_IWUSR | S_IRUGO, pod_get_amp1_engage,
- pod_set_amp1_engage);
-static DEVICE_ATTR(band_1_gain, S_IWUSR | S_IRUGO, pod_get_band_1_gain,
- pod_set_band_1_gain);
-static DEVICE_ATTR2(band_2_gain__bass, band_2_gain, S_IWUSR | S_IRUGO,
- pod_get_band_2_gain__bass, pod_set_band_2_gain__bass);
-static DEVICE_ATTR(band_2_gain, S_IWUSR | S_IRUGO, pod_get_band_2_gain,
- pod_set_band_2_gain);
-static DEVICE_ATTR2(band_3_gain__bass, band_3_gain, S_IWUSR | S_IRUGO,
- pod_get_band_3_gain__bass, pod_set_band_3_gain__bass);
-static DEVICE_ATTR(band_3_gain, S_IWUSR | S_IRUGO, pod_get_band_3_gain,
- pod_set_band_3_gain);
-static DEVICE_ATTR2(band_4_gain__bass, band_4_gain, S_IWUSR | S_IRUGO,
- pod_get_band_4_gain__bass, pod_set_band_4_gain__bass);
-static DEVICE_ATTR2(band_5_gain__bass, band_5_gain, S_IWUSR | S_IRUGO,
- pod_get_band_5_gain__bass, pod_set_band_5_gain__bass);
-static DEVICE_ATTR(band_4_gain, S_IWUSR | S_IRUGO, pod_get_band_4_gain,
- pod_set_band_4_gain);
-static DEVICE_ATTR2(band_6_gain__bass, band_6_gain, S_IWUSR | S_IRUGO,
- pod_get_band_6_gain__bass, pod_set_band_6_gain__bass);
-static DEVICE_ATTR(body, S_IRUGO, variax_get_body, line6_nop_write);
-static DEVICE_ATTR(pickup1_enable, S_IRUGO, variax_get_pickup1_enable,
- line6_nop_write);
-static DEVICE_ATTR(pickup1_type, S_IRUGO, variax_get_pickup1_type,
- line6_nop_write);
-static DEVICE_ATTR(pickup1_position, S_IRUGO, variax_get_pickup1_position,
- line6_nop_write);
-static DEVICE_ATTR(pickup1_angle, S_IRUGO, variax_get_pickup1_angle,
- line6_nop_write);
-static DEVICE_ATTR(pickup1_level, S_IRUGO, variax_get_pickup1_level,
- line6_nop_write);
-static DEVICE_ATTR(pickup2_enable, S_IRUGO, variax_get_pickup2_enable,
- line6_nop_write);
-static DEVICE_ATTR(pickup2_type, S_IRUGO, variax_get_pickup2_type,
- line6_nop_write);
-static DEVICE_ATTR(pickup2_position, S_IRUGO, variax_get_pickup2_position,
- line6_nop_write);
-static DEVICE_ATTR(pickup2_angle, S_IRUGO, variax_get_pickup2_angle,
- line6_nop_write);
-static DEVICE_ATTR(pickup2_level, S_IRUGO, variax_get_pickup2_level,
- line6_nop_write);
-static DEVICE_ATTR(pickup_phase, S_IRUGO, variax_get_pickup_phase,
- line6_nop_write);
-static DEVICE_ATTR(capacitance, S_IRUGO, variax_get_capacitance,
- line6_nop_write);
-static DEVICE_ATTR(tone_resistance, S_IRUGO, variax_get_tone_resistance,
- line6_nop_write);
-static DEVICE_ATTR(volume_resistance, S_IRUGO, variax_get_volume_resistance,
- line6_nop_write);
-static DEVICE_ATTR(taper, S_IRUGO, variax_get_taper, line6_nop_write);
-static DEVICE_ATTR(tone_dump, S_IRUGO, variax_get_tone_dump, line6_nop_write);
-static DEVICE_ATTR(save_tone, S_IRUGO, variax_get_save_tone, line6_nop_write);
-static DEVICE_ATTR(volume_dump, S_IRUGO, variax_get_volume_dump,
- line6_nop_write);
-static DEVICE_ATTR(tuning_enable, S_IRUGO, variax_get_tuning_enable,
- line6_nop_write);
-static DEVICE_ATTR(tuning6, S_IRUGO, variax_get_tuning6, line6_nop_write);
-static DEVICE_ATTR(tuning5, S_IRUGO, variax_get_tuning5, line6_nop_write);
-static DEVICE_ATTR(tuning4, S_IRUGO, variax_get_tuning4, line6_nop_write);
-static DEVICE_ATTR(tuning3, S_IRUGO, variax_get_tuning3, line6_nop_write);
-static DEVICE_ATTR(tuning2, S_IRUGO, variax_get_tuning2, line6_nop_write);
-static DEVICE_ATTR(tuning1, S_IRUGO, variax_get_tuning1, line6_nop_write);
-static DEVICE_ATTR(detune6, S_IRUGO, variax_get_detune6, line6_nop_write);
-static DEVICE_ATTR(detune5, S_IRUGO, variax_get_detune5, line6_nop_write);
-static DEVICE_ATTR(detune4, S_IRUGO, variax_get_detune4, line6_nop_write);
-static DEVICE_ATTR(detune3, S_IRUGO, variax_get_detune3, line6_nop_write);
-static DEVICE_ATTR(detune2, S_IRUGO, variax_get_detune2, line6_nop_write);
-static DEVICE_ATTR(detune1, S_IRUGO, variax_get_detune1, line6_nop_write);
-static DEVICE_ATTR(mix6, S_IRUGO, variax_get_mix6, line6_nop_write);
-static DEVICE_ATTR(mix5, S_IRUGO, variax_get_mix5, line6_nop_write);
-static DEVICE_ATTR(mix4, S_IRUGO, variax_get_mix4, line6_nop_write);
-static DEVICE_ATTR(mix3, S_IRUGO, variax_get_mix3, line6_nop_write);
-static DEVICE_ATTR(mix2, S_IRUGO, variax_get_mix2, line6_nop_write);
-static DEVICE_ATTR(mix1, S_IRUGO, variax_get_mix1, line6_nop_write);
-static DEVICE_ATTR(pickup_wiring, S_IRUGO, variax_get_pickup_wiring,
- line6_nop_write);
-
-int line6_pod_create_files(int firmware, int type, struct device *dev)
-{
- int err;
- CHECK_RETURN(device_create_file(dev, &dev_attr_tweak));
- CHECK_RETURN(device_create_file(dev, &dev_attr_wah_position));
- if ((type & (LINE6_BITS_PODXTALL)) != 0)
- CHECK_RETURN(device_create_file
- (dev, &dev_attr_compression_gain));
- CHECK_RETURN(device_create_file(dev, &dev_attr_vol_pedal_position));
- CHECK_RETURN(device_create_file(dev, &dev_attr_compression_threshold));
- CHECK_RETURN(device_create_file(dev, &dev_attr_pan));
- CHECK_RETURN(device_create_file(dev, &dev_attr_amp_model_setup));
- if (firmware >= 200)
- CHECK_RETURN(device_create_file(dev, &dev_attr_amp_model));
- CHECK_RETURN(device_create_file(dev, &dev_attr_drive));
- CHECK_RETURN(device_create_file(dev, &dev_attr_bass));
- if ((type & (LINE6_BITS_PODXTALL)) != 0)
- CHECK_RETURN(device_create_file(dev, &dev_attr_mid));
- if ((type & (LINE6_BITS_BASSPODXTALL)) != 0)
- CHECK_RETURN(device_create_file(dev, &dev_attr_lowmid));
- if ((type & (LINE6_BITS_PODXTALL)) != 0)
- CHECK_RETURN(device_create_file(dev, &dev_attr_treble));
- if ((type & (LINE6_BITS_BASSPODXTALL)) != 0)
- CHECK_RETURN(device_create_file(dev, &dev_attr_highmid));
- CHECK_RETURN(device_create_file(dev, &dev_attr_chan_vol));
- if ((type & (LINE6_BITS_PODXTALL)) != 0)
- CHECK_RETURN(device_create_file(dev, &dev_attr_reverb_mix));
- CHECK_RETURN(device_create_file(dev, &dev_attr_effect_setup));
- if (firmware >= 200)
- CHECK_RETURN(device_create_file
- (dev, &dev_attr_band_1_frequency));
- if ((type & (LINE6_BITS_PODXTALL)) != 0)
- CHECK_RETURN(device_create_file(dev, &dev_attr_presence));
- if ((type & (LINE6_BITS_BASSPODXTALL)) != 0)
- CHECK_RETURN(device_create_file(dev, &dev_attr_treble__bass));
- CHECK_RETURN(device_create_file(dev, &dev_attr_noise_gate_enable));
- CHECK_RETURN(device_create_file(dev, &dev_attr_gate_threshold));
- CHECK_RETURN(device_create_file(dev, &dev_attr_gate_decay_time));
- CHECK_RETURN(device_create_file(dev, &dev_attr_stomp_enable));
- CHECK_RETURN(device_create_file(dev, &dev_attr_comp_enable));
- CHECK_RETURN(device_create_file(dev, &dev_attr_stomp_time));
- CHECK_RETURN(device_create_file(dev, &dev_attr_delay_enable));
- CHECK_RETURN(device_create_file(dev, &dev_attr_mod_param_1));
- CHECK_RETURN(device_create_file(dev, &dev_attr_delay_param_1));
- CHECK_RETURN(device_create_file
- (dev, &dev_attr_delay_param_1_note_value));
- if ((type & (LINE6_BITS_BASSPODXTALL)) != 0)
- if (firmware >= 200)
- CHECK_RETURN(device_create_file
- (dev, &dev_attr_band_2_frequency__bass));
- CHECK_RETURN(device_create_file(dev, &dev_attr_delay_param_2));
- CHECK_RETURN(device_create_file(dev, &dev_attr_delay_volume_mix));
- CHECK_RETURN(device_create_file(dev, &dev_attr_delay_param_3));
- if ((type & (LINE6_BITS_PODXTALL)) != 0)
- CHECK_RETURN(device_create_file(dev, &dev_attr_reverb_enable));
- if ((type & (LINE6_BITS_PODXTALL)) != 0)
- CHECK_RETURN(device_create_file(dev, &dev_attr_reverb_type));
- if ((type & (LINE6_BITS_PODXTALL)) != 0)
- CHECK_RETURN(device_create_file(dev, &dev_attr_reverb_decay));
- if ((type & (LINE6_BITS_PODXTALL)) != 0)
- CHECK_RETURN(device_create_file(dev, &dev_attr_reverb_tone));
- if ((type & (LINE6_BITS_PODXTALL)) != 0)
- CHECK_RETURN(device_create_file
- (dev, &dev_attr_reverb_pre_delay));
- if ((type & (LINE6_BITS_PODXTALL)) != 0)
- CHECK_RETURN(device_create_file
- (dev, &dev_attr_reverb_pre_post));
- if ((type & (LINE6_BITS_PODXTALL)) != 0)
- if (firmware >= 200)
- CHECK_RETURN(device_create_file
- (dev, &dev_attr_band_2_frequency));
- if ((type & (LINE6_BITS_BASSPODXTALL)) != 0)
- if (firmware >= 200)
- CHECK_RETURN(device_create_file
- (dev, &dev_attr_band_3_frequency__bass));
- CHECK_RETURN(device_create_file(dev, &dev_attr_wah_enable));
- if ((type & (LINE6_BITS_BASSPODXTALL)) != 0)
- CHECK_RETURN(device_create_file
- (dev, &dev_attr_modulation_lo_cut));
- if ((type & (LINE6_BITS_BASSPODXTALL)) != 0)
- CHECK_RETURN(device_create_file
- (dev, &dev_attr_delay_reverb_lo_cut));
- if ((type & (LINE6_BITS_PODXTALL)) != 0)
- if (firmware >= 200)
- CHECK_RETURN(device_create_file
- (dev, &dev_attr_volume_pedal_minimum));
- if ((type & (LINE6_BITS_BASSPODXTALL)) != 0)
- if (firmware >= 200)
- CHECK_RETURN(device_create_file
- (dev, &dev_attr_eq_pre_post));
- CHECK_RETURN(device_create_file(dev, &dev_attr_volume_pre_post));
- if ((type & (LINE6_BITS_BASSPODXTALL)) != 0)
- CHECK_RETURN(device_create_file(dev, &dev_attr_di_model));
- if ((type & (LINE6_BITS_BASSPODXTALL)) != 0)
- CHECK_RETURN(device_create_file(dev, &dev_attr_di_delay));
- CHECK_RETURN(device_create_file(dev, &dev_attr_mod_enable));
- CHECK_RETURN(device_create_file(dev, &dev_attr_mod_param_1_note_value));
- CHECK_RETURN(device_create_file(dev, &dev_attr_mod_param_2));
- CHECK_RETURN(device_create_file(dev, &dev_attr_mod_param_3));
- CHECK_RETURN(device_create_file(dev, &dev_attr_mod_param_4));
- if ((type & (LINE6_BITS_BASSPODXTALL)) != 0)
- CHECK_RETURN(device_create_file(dev, &dev_attr_mod_param_5));
- CHECK_RETURN(device_create_file(dev, &dev_attr_mod_volume_mix));
- CHECK_RETURN(device_create_file(dev, &dev_attr_mod_pre_post));
- CHECK_RETURN(device_create_file(dev, &dev_attr_modulation_model));
- if ((type & (LINE6_BITS_PODXTALL)) != 0)
- if (firmware >= 200)
- CHECK_RETURN(device_create_file
- (dev, &dev_attr_band_3_frequency));
- if ((type & (LINE6_BITS_BASSPODXTALL)) != 0)
- if (firmware >= 200)
- CHECK_RETURN(device_create_file
- (dev, &dev_attr_band_4_frequency__bass));
- CHECK_RETURN(device_create_file
- (dev, &dev_attr_mod_param_1_double_precision));
- CHECK_RETURN(device_create_file
- (dev, &dev_attr_delay_param_1_double_precision));
- if (firmware >= 200)
- CHECK_RETURN(device_create_file(dev, &dev_attr_eq_enable));
- CHECK_RETURN(device_create_file(dev, &dev_attr_tap));
- CHECK_RETURN(device_create_file
- (dev, &dev_attr_volume_tweak_pedal_assign));
- if ((type & (LINE6_BITS_BASSPODXTALL)) != 0)
- if (firmware >= 200)
- CHECK_RETURN(device_create_file
- (dev, &dev_attr_band_5_frequency));
- CHECK_RETURN(device_create_file(dev, &dev_attr_tuner));
- CHECK_RETURN(device_create_file(dev, &dev_attr_mic_selection));
- CHECK_RETURN(device_create_file(dev, &dev_attr_cabinet_model));
- CHECK_RETURN(device_create_file(dev, &dev_attr_stomp_model));
- CHECK_RETURN(device_create_file(dev, &dev_attr_roomlevel));
- if ((type & (LINE6_BITS_PODXTALL)) != 0)
- if (firmware >= 200)
- CHECK_RETURN(device_create_file
- (dev, &dev_attr_band_4_frequency));
- if ((type & (LINE6_BITS_BASSPODXTALL)) != 0)
- if (firmware >= 200)
- CHECK_RETURN(device_create_file
- (dev, &dev_attr_band_6_frequency));
- CHECK_RETURN(device_create_file
- (dev, &dev_attr_stomp_param_1_note_value));
- CHECK_RETURN(device_create_file(dev, &dev_attr_stomp_param_2));
- CHECK_RETURN(device_create_file(dev, &dev_attr_stomp_param_3));
- CHECK_RETURN(device_create_file(dev, &dev_attr_stomp_param_4));
- CHECK_RETURN(device_create_file(dev, &dev_attr_stomp_param_5));
- CHECK_RETURN(device_create_file(dev, &dev_attr_stomp_param_6));
- if ((type & (LINE6_BITS_LIVE)) != 0)
- CHECK_RETURN(device_create_file
- (dev, &dev_attr_amp_switch_select));
- CHECK_RETURN(device_create_file(dev, &dev_attr_delay_param_4));
- CHECK_RETURN(device_create_file(dev, &dev_attr_delay_param_5));
- CHECK_RETURN(device_create_file(dev, &dev_attr_delay_pre_post));
- if ((type & (LINE6_BITS_PODXTALL)) != 0)
- CHECK_RETURN(device_create_file(dev, &dev_attr_delay_model));
- if ((type & (LINE6_BITS_BASSPODXTALL)) != 0)
- CHECK_RETURN(device_create_file
- (dev, &dev_attr_delay_verb_model));
- CHECK_RETURN(device_create_file(dev, &dev_attr_tempo_msb));
- CHECK_RETURN(device_create_file(dev, &dev_attr_tempo_lsb));
- if (firmware >= 300)
- CHECK_RETURN(device_create_file(dev, &dev_attr_wah_model));
- if (firmware >= 214)
- CHECK_RETURN(device_create_file(dev, &dev_attr_bypass_volume));
- if ((type & (LINE6_BITS_PRO)) != 0)
- CHECK_RETURN(device_create_file(dev, &dev_attr_fx_loop_on_off));
- CHECK_RETURN(device_create_file(dev, &dev_attr_tweak_param_select));
- CHECK_RETURN(device_create_file(dev, &dev_attr_amp1_engage));
- if (firmware >= 200)
- CHECK_RETURN(device_create_file(dev, &dev_attr_band_1_gain));
- if ((type & (LINE6_BITS_BASSPODXTALL)) != 0)
- if (firmware >= 200)
- CHECK_RETURN(device_create_file
- (dev, &dev_attr_band_2_gain__bass));
- if ((type & (LINE6_BITS_PODXTALL)) != 0)
- if (firmware >= 200)
- CHECK_RETURN(device_create_file
- (dev, &dev_attr_band_2_gain));
- if ((type & (LINE6_BITS_BASSPODXTALL)) != 0)
- if (firmware >= 200)
- CHECK_RETURN(device_create_file
- (dev, &dev_attr_band_3_gain__bass));
- if ((type & (LINE6_BITS_PODXTALL)) != 0)
- if (firmware >= 200)
- CHECK_RETURN(device_create_file
- (dev, &dev_attr_band_3_gain));
- if ((type & (LINE6_BITS_BASSPODXTALL)) != 0)
- if (firmware >= 200)
- CHECK_RETURN(device_create_file
- (dev, &dev_attr_band_4_gain__bass));
- if ((type & (LINE6_BITS_BASSPODXTALL)) != 0)
- if (firmware >= 200)
- CHECK_RETURN(device_create_file
- (dev, &dev_attr_band_5_gain__bass));
- if ((type & (LINE6_BITS_PODXTALL)) != 0)
- if (firmware >= 200)
- CHECK_RETURN(device_create_file
- (dev, &dev_attr_band_4_gain));
- if ((type & (LINE6_BITS_BASSPODXTALL)) != 0)
- if (firmware >= 200)
- CHECK_RETURN(device_create_file
- (dev, &dev_attr_band_6_gain__bass));
- return 0;
-}
-
-void line6_pod_remove_files(int firmware, int type, struct device *dev)
-{
- device_remove_file(dev, &dev_attr_tweak);
- device_remove_file(dev, &dev_attr_wah_position);
- if ((type & (LINE6_BITS_PODXTALL)) != 0)
- device_remove_file(dev, &dev_attr_compression_gain);
- device_remove_file(dev, &dev_attr_vol_pedal_position);
- device_remove_file(dev, &dev_attr_compression_threshold);
- device_remove_file(dev, &dev_attr_pan);
- device_remove_file(dev, &dev_attr_amp_model_setup);
- if (firmware >= 200)
- device_remove_file(dev, &dev_attr_amp_model);
- device_remove_file(dev, &dev_attr_drive);
- device_remove_file(dev, &dev_attr_bass);
- if ((type & (LINE6_BITS_PODXTALL)) != 0)
- device_remove_file(dev, &dev_attr_mid);
- if ((type & (LINE6_BITS_BASSPODXTALL)) != 0)
- device_remove_file(dev, &dev_attr_lowmid);
- if ((type & (LINE6_BITS_PODXTALL)) != 0)
- device_remove_file(dev, &dev_attr_treble);
- if ((type & (LINE6_BITS_BASSPODXTALL)) != 0)
- device_remove_file(dev, &dev_attr_highmid);
- device_remove_file(dev, &dev_attr_chan_vol);
- if ((type & (LINE6_BITS_PODXTALL)) != 0)
- device_remove_file(dev, &dev_attr_reverb_mix);
- device_remove_file(dev, &dev_attr_effect_setup);
- if (firmware >= 200)
- device_remove_file(dev, &dev_attr_band_1_frequency);
- if ((type & (LINE6_BITS_PODXTALL)) != 0)
- device_remove_file(dev, &dev_attr_presence);
- if ((type & (LINE6_BITS_BASSPODXTALL)) != 0)
- device_remove_file(dev, &dev_attr_treble__bass);
- device_remove_file(dev, &dev_attr_noise_gate_enable);
- device_remove_file(dev, &dev_attr_gate_threshold);
- device_remove_file(dev, &dev_attr_gate_decay_time);
- device_remove_file(dev, &dev_attr_stomp_enable);
- device_remove_file(dev, &dev_attr_comp_enable);
- device_remove_file(dev, &dev_attr_stomp_time);
- device_remove_file(dev, &dev_attr_delay_enable);
- device_remove_file(dev, &dev_attr_mod_param_1);
- device_remove_file(dev, &dev_attr_delay_param_1);
- device_remove_file(dev, &dev_attr_delay_param_1_note_value);
- if ((type & (LINE6_BITS_BASSPODXTALL)) != 0)
- if (firmware >= 200)
- device_remove_file(dev,
- &dev_attr_band_2_frequency__bass);
- device_remove_file(dev, &dev_attr_delay_param_2);
- device_remove_file(dev, &dev_attr_delay_volume_mix);
- device_remove_file(dev, &dev_attr_delay_param_3);
- if ((type & (LINE6_BITS_PODXTALL)) != 0)
- device_remove_file(dev, &dev_attr_reverb_enable);
- if ((type & (LINE6_BITS_PODXTALL)) != 0)
- device_remove_file(dev, &dev_attr_reverb_type);
- if ((type & (LINE6_BITS_PODXTALL)) != 0)
- device_remove_file(dev, &dev_attr_reverb_decay);
- if ((type & (LINE6_BITS_PODXTALL)) != 0)
- device_remove_file(dev, &dev_attr_reverb_tone);
- if ((type & (LINE6_BITS_PODXTALL)) != 0)
- device_remove_file(dev, &dev_attr_reverb_pre_delay);
- if ((type & (LINE6_BITS_PODXTALL)) != 0)
- device_remove_file(dev, &dev_attr_reverb_pre_post);
- if ((type & (LINE6_BITS_PODXTALL)) != 0)
- if (firmware >= 200)
- device_remove_file(dev, &dev_attr_band_2_frequency);
- if ((type & (LINE6_BITS_BASSPODXTALL)) != 0)
- if (firmware >= 200)
- device_remove_file(dev,
- &dev_attr_band_3_frequency__bass);
- device_remove_file(dev, &dev_attr_wah_enable);
- if ((type & (LINE6_BITS_BASSPODXTALL)) != 0)
- device_remove_file(dev, &dev_attr_modulation_lo_cut);
- if ((type & (LINE6_BITS_BASSPODXTALL)) != 0)
- device_remove_file(dev, &dev_attr_delay_reverb_lo_cut);
- if ((type & (LINE6_BITS_PODXTALL)) != 0)
- if (firmware >= 200)
- device_remove_file(dev, &dev_attr_volume_pedal_minimum);
- if ((type & (LINE6_BITS_BASSPODXTALL)) != 0)
- if (firmware >= 200)
- device_remove_file(dev, &dev_attr_eq_pre_post);
- device_remove_file(dev, &dev_attr_volume_pre_post);
- if ((type & (LINE6_BITS_BASSPODXTALL)) != 0)
- device_remove_file(dev, &dev_attr_di_model);
- if ((type & (LINE6_BITS_BASSPODXTALL)) != 0)
- device_remove_file(dev, &dev_attr_di_delay);
- device_remove_file(dev, &dev_attr_mod_enable);
- device_remove_file(dev, &dev_attr_mod_param_1_note_value);
- device_remove_file(dev, &dev_attr_mod_param_2);
- device_remove_file(dev, &dev_attr_mod_param_3);
- device_remove_file(dev, &dev_attr_mod_param_4);
- if ((type & (LINE6_BITS_BASSPODXTALL)) != 0)
- device_remove_file(dev, &dev_attr_mod_param_5);
- device_remove_file(dev, &dev_attr_mod_volume_mix);
- device_remove_file(dev, &dev_attr_mod_pre_post);
- device_remove_file(dev, &dev_attr_modulation_model);
- if ((type & (LINE6_BITS_PODXTALL)) != 0)
- if (firmware >= 200)
- device_remove_file(dev, &dev_attr_band_3_frequency);
- if ((type & (LINE6_BITS_BASSPODXTALL)) != 0)
- if (firmware >= 200)
- device_remove_file(dev,
- &dev_attr_band_4_frequency__bass);
- device_remove_file(dev, &dev_attr_mod_param_1_double_precision);
- device_remove_file(dev, &dev_attr_delay_param_1_double_precision);
- if (firmware >= 200)
- device_remove_file(dev, &dev_attr_eq_enable);
- device_remove_file(dev, &dev_attr_tap);
- device_remove_file(dev, &dev_attr_volume_tweak_pedal_assign);
- if ((type & (LINE6_BITS_BASSPODXTALL)) != 0)
- if (firmware >= 200)
- device_remove_file(dev, &dev_attr_band_5_frequency);
- device_remove_file(dev, &dev_attr_tuner);
- device_remove_file(dev, &dev_attr_mic_selection);
- device_remove_file(dev, &dev_attr_cabinet_model);
- device_remove_file(dev, &dev_attr_stomp_model);
- device_remove_file(dev, &dev_attr_roomlevel);
- if ((type & (LINE6_BITS_PODXTALL)) != 0)
- if (firmware >= 200)
- device_remove_file(dev, &dev_attr_band_4_frequency);
- if ((type & (LINE6_BITS_BASSPODXTALL)) != 0)
- if (firmware >= 200)
- device_remove_file(dev, &dev_attr_band_6_frequency);
- device_remove_file(dev, &dev_attr_stomp_param_1_note_value);
- device_remove_file(dev, &dev_attr_stomp_param_2);
- device_remove_file(dev, &dev_attr_stomp_param_3);
- device_remove_file(dev, &dev_attr_stomp_param_4);
- device_remove_file(dev, &dev_attr_stomp_param_5);
- device_remove_file(dev, &dev_attr_stomp_param_6);
- if ((type & (LINE6_BITS_LIVE)) != 0)
- device_remove_file(dev, &dev_attr_amp_switch_select);
- device_remove_file(dev, &dev_attr_delay_param_4);
- device_remove_file(dev, &dev_attr_delay_param_5);
- device_remove_file(dev, &dev_attr_delay_pre_post);
- if ((type & (LINE6_BITS_PODXTALL)) != 0)
- device_remove_file(dev, &dev_attr_delay_model);
- if ((type & (LINE6_BITS_BASSPODXTALL)) != 0)
- device_remove_file(dev, &dev_attr_delay_verb_model);
- device_remove_file(dev, &dev_attr_tempo_msb);
- device_remove_file(dev, &dev_attr_tempo_lsb);
- if (firmware >= 300)
- device_remove_file(dev, &dev_attr_wah_model);
- if (firmware >= 214)
- device_remove_file(dev, &dev_attr_bypass_volume);
- if ((type & (LINE6_BITS_PRO)) != 0)
- device_remove_file(dev, &dev_attr_fx_loop_on_off);
- device_remove_file(dev, &dev_attr_tweak_param_select);
- device_remove_file(dev, &dev_attr_amp1_engage);
- if (firmware >= 200)
- device_remove_file(dev, &dev_attr_band_1_gain);
- if ((type & (LINE6_BITS_BASSPODXTALL)) != 0)
- if (firmware >= 200)
- device_remove_file(dev, &dev_attr_band_2_gain__bass);
- if ((type & (LINE6_BITS_PODXTALL)) != 0)
- if (firmware >= 200)
- device_remove_file(dev, &dev_attr_band_2_gain);
- if ((type & (LINE6_BITS_BASSPODXTALL)) != 0)
- if (firmware >= 200)
- device_remove_file(dev, &dev_attr_band_3_gain__bass);
- if ((type & (LINE6_BITS_PODXTALL)) != 0)
- if (firmware >= 200)
- device_remove_file(dev, &dev_attr_band_3_gain);
- if ((type & (LINE6_BITS_BASSPODXTALL)) != 0)
- if (firmware >= 200)
- device_remove_file(dev, &dev_attr_band_4_gain__bass);
- if ((type & (LINE6_BITS_BASSPODXTALL)) != 0)
- if (firmware >= 200)
- device_remove_file(dev, &dev_attr_band_5_gain__bass);
- if ((type & (LINE6_BITS_PODXTALL)) != 0)
- if (firmware >= 200)
- device_remove_file(dev, &dev_attr_band_4_gain);
- if ((type & (LINE6_BITS_BASSPODXTALL)) != 0)
- if (firmware >= 200)
- device_remove_file(dev, &dev_attr_band_6_gain__bass);
-}
-
-int line6_variax_create_files(int firmware, int type, struct device *dev)
-{
- int err;
- CHECK_RETURN(device_create_file(dev, &dev_attr_body));
- CHECK_RETURN(device_create_file(dev, &dev_attr_pickup1_enable));
- CHECK_RETURN(device_create_file(dev, &dev_attr_pickup1_type));
- CHECK_RETURN(device_create_file(dev, &dev_attr_pickup1_position));
- CHECK_RETURN(device_create_file(dev, &dev_attr_pickup1_angle));
- CHECK_RETURN(device_create_file(dev, &dev_attr_pickup1_level));
- CHECK_RETURN(device_create_file(dev, &dev_attr_pickup2_enable));
- CHECK_RETURN(device_create_file(dev, &dev_attr_pickup2_type));
- CHECK_RETURN(device_create_file(dev, &dev_attr_pickup2_position));
- CHECK_RETURN(device_create_file(dev, &dev_attr_pickup2_angle));
- CHECK_RETURN(device_create_file(dev, &dev_attr_pickup2_level));
- CHECK_RETURN(device_create_file(dev, &dev_attr_pickup_phase));
- CHECK_RETURN(device_create_file(dev, &dev_attr_capacitance));
- CHECK_RETURN(device_create_file(dev, &dev_attr_tone_resistance));
- CHECK_RETURN(device_create_file(dev, &dev_attr_volume_resistance));
- CHECK_RETURN(device_create_file(dev, &dev_attr_taper));
- CHECK_RETURN(device_create_file(dev, &dev_attr_tone_dump));
- CHECK_RETURN(device_create_file(dev, &dev_attr_save_tone));
- CHECK_RETURN(device_create_file(dev, &dev_attr_volume_dump));
- CHECK_RETURN(device_create_file(dev, &dev_attr_tuning_enable));
- CHECK_RETURN(device_create_file(dev, &dev_attr_tuning6));
- CHECK_RETURN(device_create_file(dev, &dev_attr_tuning5));
- CHECK_RETURN(device_create_file(dev, &dev_attr_tuning4));
- CHECK_RETURN(device_create_file(dev, &dev_attr_tuning3));
- CHECK_RETURN(device_create_file(dev, &dev_attr_tuning2));
- CHECK_RETURN(device_create_file(dev, &dev_attr_tuning1));
- CHECK_RETURN(device_create_file(dev, &dev_attr_detune6));
- CHECK_RETURN(device_create_file(dev, &dev_attr_detune5));
- CHECK_RETURN(device_create_file(dev, &dev_attr_detune4));
- CHECK_RETURN(device_create_file(dev, &dev_attr_detune3));
- CHECK_RETURN(device_create_file(dev, &dev_attr_detune2));
- CHECK_RETURN(device_create_file(dev, &dev_attr_detune1));
- CHECK_RETURN(device_create_file(dev, &dev_attr_mix6));
- CHECK_RETURN(device_create_file(dev, &dev_attr_mix5));
- CHECK_RETURN(device_create_file(dev, &dev_attr_mix4));
- CHECK_RETURN(device_create_file(dev, &dev_attr_mix3));
- CHECK_RETURN(device_create_file(dev, &dev_attr_mix2));
- CHECK_RETURN(device_create_file(dev, &dev_attr_mix1));
- CHECK_RETURN(device_create_file(dev, &dev_attr_pickup_wiring));
- return 0;
-}
-
-void line6_variax_remove_files(int firmware, int type, struct device *dev)
-{
- device_remove_file(dev, &dev_attr_body);
- device_remove_file(dev, &dev_attr_pickup1_enable);
- device_remove_file(dev, &dev_attr_pickup1_type);
- device_remove_file(dev, &dev_attr_pickup1_position);
- device_remove_file(dev, &dev_attr_pickup1_angle);
- device_remove_file(dev, &dev_attr_pickup1_level);
- device_remove_file(dev, &dev_attr_pickup2_enable);
- device_remove_file(dev, &dev_attr_pickup2_type);
- device_remove_file(dev, &dev_attr_pickup2_position);
- device_remove_file(dev, &dev_attr_pickup2_angle);
- device_remove_file(dev, &dev_attr_pickup2_level);
- device_remove_file(dev, &dev_attr_pickup_phase);
- device_remove_file(dev, &dev_attr_capacitance);
- device_remove_file(dev, &dev_attr_tone_resistance);
- device_remove_file(dev, &dev_attr_volume_resistance);
- device_remove_file(dev, &dev_attr_taper);
- device_remove_file(dev, &dev_attr_tone_dump);
- device_remove_file(dev, &dev_attr_save_tone);
- device_remove_file(dev, &dev_attr_volume_dump);
- device_remove_file(dev, &dev_attr_tuning_enable);
- device_remove_file(dev, &dev_attr_tuning6);
- device_remove_file(dev, &dev_attr_tuning5);
- device_remove_file(dev, &dev_attr_tuning4);
- device_remove_file(dev, &dev_attr_tuning3);
- device_remove_file(dev, &dev_attr_tuning2);
- device_remove_file(dev, &dev_attr_tuning1);
- device_remove_file(dev, &dev_attr_detune6);
- device_remove_file(dev, &dev_attr_detune5);
- device_remove_file(dev, &dev_attr_detune4);
- device_remove_file(dev, &dev_attr_detune3);
- device_remove_file(dev, &dev_attr_detune2);
- device_remove_file(dev, &dev_attr_detune1);
- device_remove_file(dev, &dev_attr_mix6);
- device_remove_file(dev, &dev_attr_mix5);
- device_remove_file(dev, &dev_attr_mix4);
- device_remove_file(dev, &dev_attr_mix3);
- device_remove_file(dev, &dev_attr_mix2);
- device_remove_file(dev, &dev_attr_mix1);
- device_remove_file(dev, &dev_attr_pickup_wiring);
-}
diff --git a/drivers/staging/line6/control.h b/drivers/staging/line6/control.h
deleted file mode 100644
index e4c5d2c..0000000
--- a/drivers/staging/line6/control.h
+++ /dev/null
@@ -1,195 +0,0 @@
-/*
- * Line6 Linux USB driver - 0.9.1beta
- *
- * Copyright (C) 2004-2010 Markus Grabner (grabner@icg.tugraz.at)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation, version 2.
- *
- */
-
-#ifndef LINE6_CONTROL_H
-#define LINE6_CONTROL_H
-
-/**
- List of PODxt Pro controls.
- See Appendix C of the "PODxt (Pro) Pilot's Handbook" by Line6.
- Comments after the number refer to the PODxt Pro firmware version required
- for this feature.
-
- Please *don't* reformat this file since "control.c" is created automatically
- from "control.h", and this process depends on the exact formatting of the
- code and the comments below!
-*/
-
-/* *INDENT-OFF* */
-
-enum {
- POD_tweak = 1,
- POD_wah_position = 4,
- POD_compression_gain = 5, /* device: LINE6_BITS_PODXTALL */
- POD_vol_pedal_position = 7,
- POD_compression_threshold = 9,
- POD_pan = 10,
- POD_amp_model_setup = 11,
- POD_amp_model = 12, /* firmware: 2.0 */
- POD_drive = 13,
- POD_bass = 14,
- POD_mid = 15, /* device: LINE6_BITS_PODXTALL */
- POD_lowmid = 15, /* device: LINE6_BITS_BASSPODXTALL */
- POD_treble = 16, /* device: LINE6_BITS_PODXTALL */
- POD_highmid = 16, /* device: LINE6_BITS_BASSPODXTALL */
- POD_chan_vol = 17,
- POD_reverb_mix = 18, /* device: LINE6_BITS_PODXTALL */
- POD_effect_setup = 19,
- POD_band_1_frequency = 20, /* firmware: 2.0 */
- POD_presence = 21, /* device: LINE6_BITS_PODXTALL */
- POD_treble__bass = 21, /* device: LINE6_BITS_BASSPODXTALL */
- POD_noise_gate_enable = 22,
- POD_gate_threshold = 23,
- POD_gate_decay_time = 24,
- POD_stomp_enable = 25,
- POD_comp_enable = 26,
- POD_stomp_time = 27,
- POD_delay_enable = 28,
- POD_mod_param_1 = 29,
- POD_delay_param_1 = 30,
- POD_delay_param_1_note_value = 31,
- POD_band_2_frequency__bass = 32, /* device: LINE6_BITS_BASSPODXTALL */ /* firmware: 2.0 */
- POD_delay_param_2 = 33,
- POD_delay_volume_mix = 34,
- POD_delay_param_3 = 35,
- POD_reverb_enable = 36, /* device: LINE6_BITS_PODXTALL */
- POD_reverb_type = 37, /* device: LINE6_BITS_PODXTALL */
- POD_reverb_decay = 38, /* device: LINE6_BITS_PODXTALL */
- POD_reverb_tone = 39, /* device: LINE6_BITS_PODXTALL */
- POD_reverb_pre_delay = 40, /* device: LINE6_BITS_PODXTALL */
- POD_reverb_pre_post = 41, /* device: LINE6_BITS_PODXTALL */
- POD_band_2_frequency = 42, /* device: LINE6_BITS_PODXTALL */ /* firmware: 2.0 */
- POD_band_3_frequency__bass = 42, /* device: LINE6_BITS_BASSPODXTALL */ /* firmware: 2.0 */
- POD_wah_enable = 43,
- POD_modulation_lo_cut = 44, /* device: LINE6_BITS_BASSPODXTALL */
- POD_delay_reverb_lo_cut = 45, /* device: LINE6_BITS_BASSPODXTALL */
- POD_volume_pedal_minimum = 46, /* device: LINE6_BITS_PODXTALL */ /* firmware: 2.0 */
- POD_eq_pre_post = 46, /* device: LINE6_BITS_BASSPODXTALL */ /* firmware: 2.0 */
- POD_volume_pre_post = 47,
- POD_di_model = 48, /* device: LINE6_BITS_BASSPODXTALL */
- POD_di_delay = 49, /* device: LINE6_BITS_BASSPODXTALL */
- POD_mod_enable = 50,
- POD_mod_param_1_note_value = 51,
- POD_mod_param_2 = 52,
- POD_mod_param_3 = 53,
- POD_mod_param_4 = 54,
- POD_mod_param_5 = 55, /* device: LINE6_BITS_BASSPODXTALL */
- POD_mod_volume_mix = 56,
- POD_mod_pre_post = 57,
- POD_modulation_model = 58,
- POD_band_3_frequency = 60, /* device: LINE6_BITS_PODXTALL */ /* firmware: 2.0 */
- POD_band_4_frequency__bass = 60, /* device: LINE6_BITS_BASSPODXTALL */ /* firmware: 2.0 */
- POD_mod_param_1_double_precision = 61,
- POD_delay_param_1_double_precision = 62,
- POD_eq_enable = 63, /* firmware: 2.0 */
- POD_tap = 64,
- POD_volume_tweak_pedal_assign = 65,
- POD_band_5_frequency = 68, /* device: LINE6_BITS_BASSPODXTALL */ /* firmware: 2.0 */
- POD_tuner = 69,
- POD_mic_selection = 70,
- POD_cabinet_model = 71,
- POD_stomp_model = 75,
- POD_roomlevel = 76,
- POD_band_4_frequency = 77, /* device: LINE6_BITS_PODXTALL */ /* firmware: 2.0 */
- POD_band_6_frequency = 77, /* device: LINE6_BITS_BASSPODXTALL */ /* firmware: 2.0 */
- POD_stomp_param_1_note_value = 78,
- POD_stomp_param_2 = 79,
- POD_stomp_param_3 = 80,
- POD_stomp_param_4 = 81,
- POD_stomp_param_5 = 82,
- POD_stomp_param_6 = 83,
- POD_amp_switch_select = 84, /* device: LINE6_BITS_LIVE */
- POD_delay_param_4 = 85,
- POD_delay_param_5 = 86,
- POD_delay_pre_post = 87,
- POD_delay_model = 88, /* device: LINE6_BITS_PODXTALL */
- POD_delay_verb_model = 88, /* device: LINE6_BITS_BASSPODXTALL */
- POD_tempo_msb = 89,
- POD_tempo_lsb = 90,
- POD_wah_model = 91, /* firmware: 3.0 */
- POD_bypass_volume = 105, /* firmware: 2.14 */
- POD_fx_loop_on_off = 107, /* device: LINE6_BITS_PRO */
- POD_tweak_param_select = 108,
- POD_amp1_engage = 111,
- POD_band_1_gain = 114, /* firmware: 2.0 */
- POD_band_2_gain__bass = 115, /* device: LINE6_BITS_BASSPODXTALL */ /* firmware: 2.0 */
- POD_band_2_gain = 116, /* device: LINE6_BITS_PODXTALL */ /* firmware: 2.0 */
- POD_band_3_gain__bass = 116, /* device: LINE6_BITS_BASSPODXTALL */ /* firmware: 2.0 */
- POD_band_3_gain = 117, /* device: LINE6_BITS_PODXTALL */ /* firmware: 2.0 */
- POD_band_4_gain__bass = 117, /* device: LINE6_BITS_BASSPODXTALL */ /* firmware: 2.0 */
- POD_band_5_gain__bass = 118, /* device: LINE6_BITS_BASSPODXTALL */ /* firmware: 2.0 */
- POD_band_4_gain = 119, /* device: LINE6_BITS_PODXTALL */ /* firmware: 2.0 */
- POD_band_6_gain__bass = 119 /* device: LINE6_BITS_BASSPODXTALL */ /* firmware: 2.0 */
-};
-
-/**
- List of Variax workbench controls (dump).
-*/
-enum {
- VARIAX_body = 3,
- VARIAX_pickup1_enable = 4, /* 0: enabled, 1: disabled */
- VARIAX_pickup1_type = 8,
- VARIAX_pickup1_position = 9, /* type: 24 bit float */
- VARIAX_pickup1_angle = 12, /* type: 24 bit float */
- VARIAX_pickup1_level = 15, /* type: 24 bit float */
- VARIAX_pickup2_enable = 18, /* 0: enabled, 1: disabled */
- VARIAX_pickup2_type = 22,
- VARIAX_pickup2_position = 23, /* type: 24 bit float */
- VARIAX_pickup2_angle = 26, /* type: 24 bit float */
- VARIAX_pickup2_level = 29, /* type: 24 bit float */
- VARIAX_pickup_phase = 32, /* 0: in phase, 1: out of phase */
- VARIAX_capacitance = 33, /* type: 24 bit float */
- VARIAX_tone_resistance = 36, /* type: 24 bit float */
- VARIAX_volume_resistance = 39, /* type: 24 bit float */
- VARIAX_taper = 42, /* 0: Linear, 1: Audio */
- VARIAX_tone_dump = 43, /* type: 24 bit float */
- VARIAX_save_tone = 46,
- VARIAX_volume_dump = 47, /* type: 24 bit float */
- VARIAX_tuning_enable = 50,
- VARIAX_tuning6 = 51,
- VARIAX_tuning5 = 52,
- VARIAX_tuning4 = 53,
- VARIAX_tuning3 = 54,
- VARIAX_tuning2 = 55,
- VARIAX_tuning1 = 56,
- VARIAX_detune6 = 57, /* type: 24 bit float */
- VARIAX_detune5 = 60, /* type: 24 bit float */
- VARIAX_detune4 = 63, /* type: 24 bit float */
- VARIAX_detune3 = 66, /* type: 24 bit float */
- VARIAX_detune2 = 69, /* type: 24 bit float */
- VARIAX_detune1 = 72, /* type: 24 bit float */
- VARIAX_mix6 = 75, /* type: 24 bit float */
- VARIAX_mix5 = 78, /* type: 24 bit float */
- VARIAX_mix4 = 81, /* type: 24 bit float */
- VARIAX_mix3 = 84, /* type: 24 bit float */
- VARIAX_mix2 = 87, /* type: 24 bit float */
- VARIAX_mix1 = 90, /* type: 24 bit float */
- VARIAX_pickup_wiring = 96 /* 0: parallel, 1: series */
-};
-
-/**
- List of Variax workbench controls (MIDI).
-*/
-enum {
- VARIAXMIDI_volume = 7,
- VARIAXMIDI_tone = 79,
-};
-
-/* *INDENT-ON* */
-
-extern int line6_pod_create_files(int firmware, int type, struct device *dev);
-extern void line6_pod_remove_files(int firmware, int type, struct device *dev);
-extern int line6_variax_create_files(int firmware, int type,
- struct device *dev);
-extern void line6_variax_remove_files(int firmware, int type,
- struct device *dev);
-
-#endif
diff --git a/drivers/staging/line6/driver.c b/drivers/staging/line6/driver.c
index b8358ca7..1e4ce500 100644
--- a/drivers/staging/line6/driver.c
+++ b/drivers/staging/line6/driver.c
@@ -16,7 +16,6 @@
#include "audio.h"
#include "capture.h"
-#include "control.h"
#include "driver.h"
#include "midi.h"
#include "playback.h"
@@ -96,8 +95,6 @@
0xf0, 0x7e, 0x7f, 0x06, 0x01, 0xf7
};
-struct usb_line6 *line6_devices[LINE6_MAX_DEVICES];
-
/**
Class for asynchronous messages.
*/
@@ -179,22 +176,6 @@
}
#endif
-#ifdef CONFIG_LINE6_USB_DUMP_CTRL
-/*
- Dump URB data to syslog.
-*/
-static void line6_dump_urb(struct urb *urb)
-{
- struct usb_line6 *line6 = (struct usb_line6 *)urb->context;
-
- if (urb->status < 0)
- return;
-
- line6_write_hexdump(line6, 'R', (unsigned char *)urb->transfer_buffer,
- urb->actual_length);
-}
-#endif
-
/*
Send raw message in pieces of wMaxPacketSize bytes.
*/
@@ -203,10 +184,6 @@
{
int i, done = 0;
-#ifdef CONFIG_LINE6_USB_DUMP_CTRL
- line6_write_hexdump(line6, 'S', buffer, size);
-#endif
-
for (i = 0; i < size; i += line6->max_packet_size) {
int partial;
const char *frag_buf = buffer + i;
@@ -261,10 +238,6 @@
(char *)msg->buffer + done, bytes,
line6_async_request_sent, msg, line6->interval);
-#ifdef CONFIG_LINE6_USB_DUMP_CTRL
- line6_write_hexdump(line6, 'S', (char *)msg->buffer + done, bytes);
-#endif
-
msg->done += bytes;
retval = usb_submit_urb(urb, GFP_ATOMIC);
@@ -405,19 +378,13 @@
if (urb->status == -ESHUTDOWN)
return;
-#ifdef CONFIG_LINE6_USB_DUMP_CTRL
- line6_dump_urb(urb);
-#endif
-
done =
line6_midibuf_write(mb, urb->transfer_buffer, urb->actual_length);
if (done < urb->actual_length) {
line6_midibuf_ignore(mb, done);
- DEBUG_MESSAGES(dev_err
- (line6->ifcdev,
- "%d %d buffer overflow - message skipped\n",
- done, urb->actual_length));
+ dev_dbg(line6->ifcdev, "%d %d buffer overflow - message skipped\n",
+ done, urb->actual_length);
}
for (;;) {
@@ -428,15 +395,7 @@
if (done == 0)
break;
- /* MIDI input filter */
- if (line6_midibuf_skip_message
- (mb, line6->line6midi->midi_mask_receive))
- continue;
-
line6->message_length = done;
-#ifdef CONFIG_LINE6_USB_DUMP_MIDI
- line6_write_hexdump(line6, 'r', line6->buffer_message, done);
-#endif
line6_midi_receive(line6, line6->buffer_message, done);
switch (line6->usbdev->descriptor.idProduct) {
@@ -506,10 +465,6 @@
buffer[0] = LINE6_PROGRAM_CHANGE | LINE6_CHANNEL_HOST;
buffer[1] = value;
-#ifdef CONFIG_LINE6_USB_DUMP_CTRL
- line6_write_hexdump(line6, 'S', buffer, 2);
-#endif
-
retval = usb_interrupt_msg(line6->usbdev,
usb_sndintpipe(line6->usbdev,
line6->ep_control_write),
@@ -543,10 +498,6 @@
buffer[1] = param;
buffer[2] = value;
-#ifdef CONFIG_LINE6_USB_DUMP_CTRL
- line6_write_hexdump(line6, 'S', buffer, 3);
-#endif
-
retval = usb_interrupt_msg(line6->usbdev,
usb_sndintpipe(line6->usbdev,
line6->ep_control_write),
@@ -690,20 +641,6 @@
}
/*
- "write" request on "raw" special file.
-*/
-#ifdef CONFIG_LINE6_USB_RAW
-ssize_t line6_set_raw(struct device *dev, struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct usb_interface *interface = to_usb_interface(dev);
- struct usb_line6 *line6 = usb_get_intfdata(interface);
- line6_send_raw_message(line6, buf, count);
- return count;
-}
-#endif
-
-/*
Generic destructor.
*/
static void line6_destruct(struct usb_interface *interface)
@@ -740,7 +677,6 @@
struct usb_device *usbdev;
struct usb_line6 *line6;
const struct line6_properties *properties;
- int devnum;
int interface_number, alternate = 0;
int product;
int size = 0;
@@ -774,16 +710,6 @@
goto err_put;
}
- /* find free slot in device table: */
- for (devnum = 0; devnum < LINE6_MAX_DEVICES; ++devnum)
- if (line6_devices[devnum] == NULL)
- break;
-
- if (devnum == LINE6_MAX_DEVICES) {
- ret = -ENODEV;
- goto err_put;
- }
-
/* initialize device info: */
properties = &line6_properties_table[devtype];
dev_info(&interface->dev, "Line6 %s found\n", properties->name);
@@ -1112,7 +1038,6 @@
dev_info(&interface->dev, "Line6 %s now attached\n",
line6->properties->name);
- line6_devices[devnum] = line6;
switch (product) {
case LINE6_DEVID_PODX3:
@@ -1141,7 +1066,7 @@
{
struct usb_line6 *line6;
struct usb_device *usbdev;
- int interface_number, i;
+ int interface_number;
if (interface == NULL)
return;
@@ -1214,10 +1139,6 @@
dev_info(&interface->dev, "Line6 %s now disconnected\n",
line6->properties->name);
-
- for (i = LINE6_MAX_DEVICES; i--;)
- if (line6_devices[i] == line6)
- line6_devices[i] = NULL;
}
line6_destruct(interface);
diff --git a/drivers/staging/line6/driver.h b/drivers/staging/line6/driver.h
index a3029eb..f0be5a2 100644
--- a/drivers/staging/line6/driver.h
+++ b/drivers/staging/line6/driver.h
@@ -20,12 +20,11 @@
#define DRIVER_NAME "line6usb"
-#if defined(CONFIG_LINE6_USB_DUMP_CTRL) || defined(CONFIG_LINE6_USB_DUMP_MIDI) || defined(CONFIG_LINE6_USB_DUMP_PCM)
+#if defined(CONFIG_LINE6_USB_DUMP_PCM)
#define CONFIG_LINE6_USB_DUMP_ANY
#endif
#define LINE6_TIMEOUT 1
-#define LINE6_MAX_DEVICES 8
#define LINE6_BUFSIZE_LISTEN 32
#define LINE6_MESSAGE_MAXLEN 256
@@ -53,12 +52,6 @@
#define LINE6_CHANNEL_MASK 0x0f
-#ifdef CONFIG_LINE6_USB_DEBUG
-#define DEBUG_MESSAGES(x) (x)
-#else
-#define DEBUG_MESSAGES(x)
-#endif
-
#define MISSING_CASE \
printk(KERN_ERR "line6usb driver bug: missing case in %s:%d\n", \
__FILE__, __LINE__)
@@ -78,7 +71,6 @@
} while (0)
extern const unsigned char line6_midi_id[3];
-extern struct usb_line6 *line6_devices[LINE6_MAX_DEVICES];
static const int SYSEX_DATA_OFS = sizeof(line6_midi_id) + 3;
static const int SYSEX_EXTRA_SIZE = sizeof(line6_midi_id) + 4;
diff --git a/drivers/staging/line6/dumprequest.c b/drivers/staging/line6/dumprequest.c
deleted file mode 100644
index 60c7bae..0000000
--- a/drivers/staging/line6/dumprequest.c
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * Line6 Linux USB driver - 0.9.1beta
- *
- * Copyright (C) 2004-2010 Markus Grabner (grabner@icg.tugraz.at)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation, version 2.
- *
- */
-
-#include <linux/slab.h>
-
-#include "driver.h"
-#include "dumprequest.h"
-
-/*
- Set "dump in progress" flag.
-*/
-void line6_dump_started(struct line6_dump_request *l6dr, int dest)
-{
- l6dr->in_progress = dest;
-}
-
-/*
- Invalidate current channel, i.e., set "dump in progress" flag.
- Reading from the "dump" special file blocks until dump is completed.
-*/
-void line6_invalidate_current(struct line6_dump_request *l6dr)
-{
- line6_dump_started(l6dr, LINE6_DUMP_CURRENT);
-}
-
-/*
- Clear "dump in progress" flag and notify waiting processes.
-*/
-void line6_dump_finished(struct line6_dump_request *l6dr)
-{
- l6dr->in_progress = LINE6_DUMP_NONE;
- wake_up(&l6dr->wait);
-}
-
-/*
- Send an asynchronous channel dump request.
-*/
-int line6_dump_request_async(struct line6_dump_request *l6dr,
- struct usb_line6 *line6, int num, int dest)
-{
- int ret;
- line6_dump_started(l6dr, dest);
- ret = line6_send_raw_message_async(line6, l6dr->reqbufs[num].buffer,
- l6dr->reqbufs[num].length);
-
- if (ret < 0)
- line6_dump_finished(l6dr);
-
- return ret;
-}
-
-/*
- Wait for completion (interruptible).
-*/
-int line6_dump_wait_interruptible(struct line6_dump_request *l6dr)
-{
- return wait_event_interruptible(l6dr->wait,
- l6dr->in_progress == LINE6_DUMP_NONE);
-}
-
-/*
- Wait for completion.
-*/
-void line6_dump_wait(struct line6_dump_request *l6dr)
-{
- wait_event(l6dr->wait, l6dr->in_progress == LINE6_DUMP_NONE);
-}
-
-/*
- Wait for completion (with timeout).
-*/
-int line6_dump_wait_timeout(struct line6_dump_request *l6dr, long timeout)
-{
- return wait_event_timeout(l6dr->wait,
- l6dr->in_progress == LINE6_DUMP_NONE,
- timeout);
-}
-
-/*
- Initialize dump request buffer.
-*/
-int line6_dumpreq_initbuf(struct line6_dump_request *l6dr, const void *buf,
- size_t len, int num)
-{
- l6dr->reqbufs[num].buffer = kmemdup(buf, len, GFP_KERNEL);
- if (l6dr->reqbufs[num].buffer == NULL)
- return -ENOMEM;
- l6dr->reqbufs[num].length = len;
- return 0;
-}
-
-/*
- Initialize dump request data structure (including one buffer).
-*/
-int line6_dumpreq_init(struct line6_dump_request *l6dr, const void *buf,
- size_t len)
-{
- int ret;
- ret = line6_dumpreq_initbuf(l6dr, buf, len, 0);
- if (ret < 0)
- return ret;
- init_waitqueue_head(&l6dr->wait);
- return 0;
-}
-
-/*
- Destruct dump request data structure.
-*/
-void line6_dumpreq_destructbuf(struct line6_dump_request *l6dr, int num)
-{
- if (l6dr == NULL)
- return;
- if (l6dr->reqbufs[num].buffer == NULL)
- return;
- kfree(l6dr->reqbufs[num].buffer);
- l6dr->reqbufs[num].buffer = NULL;
-}
-
-/*
- Destruct dump request data structure.
-*/
-void line6_dumpreq_destruct(struct line6_dump_request *l6dr)
-{
- if (l6dr->reqbufs[0].buffer == NULL)
- return;
- line6_dumpreq_destructbuf(l6dr, 0);
-}
diff --git a/drivers/staging/line6/dumprequest.h b/drivers/staging/line6/dumprequest.h
deleted file mode 100644
index c17a262..0000000
--- a/drivers/staging/line6/dumprequest.h
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- * Line6 Linux USB driver - 0.9.1beta
- *
- * Copyright (C) 2004-2010 Markus Grabner (grabner@icg.tugraz.at)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation, version 2.
- *
- */
-
-#ifndef DUMPREQUEST_H
-#define DUMPREQUEST_H
-
-#include <linux/usb.h>
-#include <linux/wait.h>
-#include <sound/core.h>
-
-enum {
- LINE6_DUMP_NONE,
- LINE6_DUMP_CURRENT
-};
-
-struct line6_dump_reqbuf {
- /**
- Buffer for dump requests.
- */
- unsigned char *buffer;
-
- /**
- Size of dump request.
- */
- size_t length;
-};
-
-/**
- Provides the functionality to request channel/model/... dump data from a
- Line6 device.
-*/
-struct line6_dump_request {
- /**
- Wait queue for access to program dump data.
- */
- wait_queue_head_t wait;
-
- /**
- Indicates an unfinished program dump request.
- 0: no dump
- 1: dump current settings
- Other device-specific values are also allowed.
- */
- int in_progress;
-
- /**
- Dump request buffers
- */
- struct line6_dump_reqbuf reqbufs[1];
-};
-
-extern void line6_dump_finished(struct line6_dump_request *l6dr);
-extern int line6_dump_request_async(struct line6_dump_request *l6dr,
- struct usb_line6 *line6, int num, int dest);
-extern void line6_dump_started(struct line6_dump_request *l6dr, int dest);
-extern void line6_dumpreq_destruct(struct line6_dump_request *l6dr);
-extern void line6_dumpreq_destructbuf(struct line6_dump_request *l6dr, int num);
-extern int line6_dumpreq_init(struct line6_dump_request *l6dr, const void *buf,
- size_t len);
-extern int line6_dumpreq_initbuf(struct line6_dump_request *l6dr,
- const void *buf, size_t len, int num);
-extern void line6_invalidate_current(struct line6_dump_request *l6dr);
-extern void line6_dump_wait(struct line6_dump_request *l6dr);
-extern int line6_dump_wait_interruptible(struct line6_dump_request *l6dr);
-extern int line6_dump_wait_timeout(struct line6_dump_request *l6dr,
- long timeout);
-
-#endif
diff --git a/drivers/staging/line6/midi.c b/drivers/staging/line6/midi.c
index 5040729..6982eca 100644
--- a/drivers/staging/line6/midi.c
+++ b/drivers/staging/line6/midi.c
@@ -59,9 +59,6 @@
if (done == 0)
break;
-#ifdef CONFIG_LINE6_USB_DUMP_MIDI
- line6_write_hexdump(line6, 's', chunk, done);
-#endif
line6_midibuf_write(mb, chunk, done);
snd_rawmidi_transmit_ack(substream, done);
}
@@ -72,10 +69,6 @@
if (done == 0)
break;
- if (line6_midibuf_skip_message
- (mb, line6midi->midi_mask_transmit))
- continue;
-
send_midi_async(line6, chunk, done);
}
@@ -131,9 +124,6 @@
dev_err(line6->ifcdev, "Out of memory\n");
return -ENOMEM;
}
-#ifdef CONFIG_LINE6_USB_DUMP_CTRL
- line6_write_hexdump(line6, 'S', data, length);
-#endif
transfer_buffer = kmemdup(data, length, GFP_ATOMIC);
@@ -158,28 +148,6 @@
}
++line6->line6midi->num_active_send_urbs;
-
- switch (line6->usbdev->descriptor.idProduct) {
- case LINE6_DEVID_BASSPODXT:
- case LINE6_DEVID_BASSPODXTLIVE:
- case LINE6_DEVID_BASSPODXTPRO:
- case LINE6_DEVID_PODXT:
- case LINE6_DEVID_PODXTLIVE:
- case LINE6_DEVID_PODXTPRO:
- case LINE6_DEVID_POCKETPOD:
- line6_pod_midi_postprocess((struct usb_line6_pod *)line6, data,
- length);
- break;
-
- case LINE6_DEVID_VARIAX:
- case LINE6_DEVID_PODHD300:
- case LINE6_DEVID_PODHD500:
- break;
-
- default:
- MISSING_CASE;
- }
-
return 0;
}
@@ -287,83 +255,10 @@
return 0;
}
-/*
- "read" request on "midi_mask_transmit" special file.
-*/
-static ssize_t midi_get_midi_mask_transmit(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct usb_interface *interface = to_usb_interface(dev);
- struct usb_line6 *line6 = usb_get_intfdata(interface);
- return sprintf(buf, "%d\n", line6->line6midi->midi_mask_transmit);
-}
-
-/*
- "write" request on "midi_mask" special file.
-*/
-static ssize_t midi_set_midi_mask_transmit(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct usb_interface *interface = to_usb_interface(dev);
- struct usb_line6 *line6 = usb_get_intfdata(interface);
- unsigned short value;
- int ret;
-
- ret = kstrtou16(buf, 10, &value);
- if (ret)
- return ret;
-
- line6->line6midi->midi_mask_transmit = value;
- return count;
-}
-
-/*
- "read" request on "midi_mask_receive" special file.
-*/
-static ssize_t midi_get_midi_mask_receive(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct usb_interface *interface = to_usb_interface(dev);
- struct usb_line6 *line6 = usb_get_intfdata(interface);
- return sprintf(buf, "%d\n", line6->line6midi->midi_mask_receive);
-}
-
-/*
- "write" request on "midi_mask" special file.
-*/
-static ssize_t midi_set_midi_mask_receive(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct usb_interface *interface = to_usb_interface(dev);
- struct usb_line6 *line6 = usb_get_intfdata(interface);
- unsigned short value;
- int ret;
-
- ret = kstrtou16(buf, 10, &value);
- if (ret)
- return ret;
-
- line6->line6midi->midi_mask_receive = value;
- return count;
-}
-
-static DEVICE_ATTR(midi_mask_transmit, S_IWUSR | S_IRUGO,
- midi_get_midi_mask_transmit, midi_set_midi_mask_transmit);
-static DEVICE_ATTR(midi_mask_receive, S_IWUSR | S_IRUGO,
- midi_get_midi_mask_receive, midi_set_midi_mask_receive);
-
/* MIDI device destructor */
static int snd_line6_midi_free(struct snd_device *device)
{
struct snd_line6_midi *line6midi = device->device_data;
- device_remove_file(line6midi->line6->ifcdev,
- &dev_attr_midi_mask_transmit);
- device_remove_file(line6midi->line6->ifcdev,
- &dev_attr_midi_mask_receive);
line6_midibuf_destroy(&line6midi->midibuf_in);
line6_midibuf_destroy(&line6midi->midibuf_out);
return 0;
@@ -405,19 +300,6 @@
}
line6midi->line6 = line6;
-
- switch (line6->product) {
- case LINE6_DEVID_PODHD300:
- case LINE6_DEVID_PODHD500:
- line6midi->midi_mask_transmit = 1;
- line6midi->midi_mask_receive = 1;
- break;
-
- default:
- line6midi->midi_mask_transmit = 1;
- line6midi->midi_mask_receive = 4;
- }
-
line6->line6midi = line6midi;
err = snd_device_new(line6->card, SNDRV_DEV_RAWMIDI, line6midi,
@@ -431,14 +313,6 @@
if (err < 0)
return err;
- err = device_create_file(line6->ifcdev, &dev_attr_midi_mask_transmit);
- if (err < 0)
- return err;
-
- err = device_create_file(line6->ifcdev, &dev_attr_midi_mask_receive);
- if (err < 0)
- return err;
-
init_waitqueue_head(&line6midi->send_wait);
spin_lock_init(&line6midi->send_urb_lock);
spin_lock_init(&line6midi->midi_transmit_lock);
diff --git a/drivers/staging/line6/midi.h b/drivers/staging/line6/midi.h
index 4a9e9f9..19dabd5 100644
--- a/drivers/staging/line6/midi.h
+++ b/drivers/staging/line6/midi.h
@@ -55,16 +55,6 @@
wait_queue_head_t send_wait;
/**
- Bit mask for output MIDI channels.
- */
- unsigned short midi_mask_transmit;
-
- /**
- Bit mask for input MIDI channels.
- */
- unsigned short midi_mask_receive;
-
- /**
Buffer for incoming MIDI stream.
*/
struct MidiBuffer midibuf_in;
diff --git a/drivers/staging/line6/midibuf.c b/drivers/staging/line6/midibuf.c
index 836e8c8..968e0de 100644
--- a/drivers/staging/line6/midibuf.c
+++ b/drivers/staging/line6/midibuf.c
@@ -64,9 +64,9 @@
void line6_midibuf_status(struct MidiBuffer *this)
{
- pr_debug("midibuf size=%d split=%d pos_read=%d pos_write=%d "
- "full=%d command_prev=%02x\n", this->size, this->split,
- this->pos_read, this->pos_write, this->full, this->command_prev);
+ pr_debug("midibuf size=%d split=%d pos_read=%d pos_write=%d full=%d command_prev=%02x\n",
+ this->size, this->split, this->pos_read, this->pos_write,
+ this->full, this->command_prev);
}
int line6_midibuf_bytes_free(struct MidiBuffer *this)
diff --git a/drivers/staging/line6/pcm.c b/drivers/staging/line6/pcm.c
index 7fe44a6..6c1e313 100644
--- a/drivers/staging/line6/pcm.c
+++ b/drivers/staging/line6/pcm.c
@@ -109,7 +109,7 @@
line6pcm->prev_fbuf = NULL;
if (test_flags(flags_old, flags_new, LINE6_BITS_CAPTURE_BUFFER)) {
- /* We may be invoked multiple times in a row so allocate once only */
+ /* Invoked multiple times in a row so allocate once only */
if (!line6pcm->buffer_in) {
line6pcm->buffer_in =
kmalloc(LINE6_ISO_BUFFERS * LINE6_ISO_PACKETS *
@@ -148,7 +148,7 @@
}
if (test_flags(flags_old, flags_new, LINE6_BITS_PLAYBACK_BUFFER)) {
- /* We may be invoked multiple times in a row so allocate once only */
+ /* Invoked multiple times in a row so allocate once only */
if (!line6pcm->buffer_out) {
line6pcm->buffer_out =
kmalloc(LINE6_ISO_BUFFERS * LINE6_ISO_PACKETS *
diff --git a/drivers/staging/line6/pcm.h b/drivers/staging/line6/pcm.h
index 5210ec8..6aa0d46 100644
--- a/drivers/staging/line6/pcm.h
+++ b/drivers/staging/line6/pcm.h
@@ -167,7 +167,7 @@
#endif
LINE6_BIT_PCM_ALSA_CAPTURE_STREAM |
LINE6_BIT_PCM_MONITOR_CAPTURE_STREAM,
-
+
LINE6_BITS_STREAM =
LINE6_BITS_PLAYBACK_STREAM |
LINE6_BITS_CAPTURE_STREAM
diff --git a/drivers/staging/line6/playback.c b/drivers/staging/line6/playback.c
index a0ab9d0..4cf23af 100644
--- a/drivers/staging/line6/playback.c
+++ b/drivers/staging/line6/playback.c
@@ -185,7 +185,7 @@
if (urb_size == 0) {
/* can't determine URB size */
spin_unlock_irqrestore(&line6pcm->lock_audio_out, flags);
- dev_err(line6pcm->line6->ifcdev, "driver bug: urb_size = 0\n"); /* this is somewhat paranoid */
+ dev_err(line6pcm->line6->ifcdev, "driver bug: urb_size = 0\n");
return -EINVAL;
}
@@ -218,7 +218,8 @@
len * bytes_per_frame, runtime->dma_area,
(urb_frames - len) * bytes_per_frame);
} else
- dev_err(line6pcm->line6->ifcdev, "driver bug: len = %d\n", len); /* this is somewhat paranoid */
+ dev_err(line6pcm->line6->ifcdev, "driver bug: len = %d\n",
+ len);
} else {
memcpy(urb_out->transfer_buffer,
runtime->dma_area +
@@ -319,7 +320,8 @@
}
/*
- Wait until unlinking of all currently active playback URBs has been finished.
+ Wait until unlinking of all currently active playback URBs has been
+ finished.
*/
void line6_wait_clear_audio_out_urbs(struct snd_line6_pcm *line6pcm)
{
@@ -413,7 +415,8 @@
if (!shutdown) {
submit_audio_out_urb(line6pcm);
- if (test_bit(LINE6_INDEX_PCM_ALSA_PLAYBACK_STREAM, &line6pcm->flags)) {
+ if (test_bit(LINE6_INDEX_PCM_ALSA_PLAYBACK_STREAM,
+ &line6pcm->flags)) {
line6pcm->bytes_out += length;
if (line6pcm->bytes_out >= line6pcm->period_out) {
line6pcm->bytes_out %= line6pcm->period_out;
@@ -499,7 +502,8 @@
#ifdef CONFIG_PM
case SNDRV_PCM_TRIGGER_RESUME:
#endif
- err = line6_pcm_acquire(line6pcm, LINE6_BIT_PCM_ALSA_PLAYBACK_STREAM);
+ err = line6_pcm_acquire(line6pcm,
+ LINE6_BIT_PCM_ALSA_PLAYBACK_STREAM);
if (err < 0)
return err;
@@ -510,7 +514,8 @@
#ifdef CONFIG_PM
case SNDRV_PCM_TRIGGER_SUSPEND:
#endif
- err = line6_pcm_release(line6pcm, LINE6_BIT_PCM_ALSA_PLAYBACK_STREAM);
+ err = line6_pcm_release(line6pcm,
+ LINE6_BIT_PCM_ALSA_PLAYBACK_STREAM);
if (err < 0)
return err;
diff --git a/drivers/staging/line6/pod.c b/drivers/staging/line6/pod.c
index 9edd053..e542540 100644
--- a/drivers/staging/line6/pod.c
+++ b/drivers/staging/line6/pod.c
@@ -15,7 +15,6 @@
#include "audio.h"
#include "capture.h"
-#include "control.h"
#include "driver.h"
#include "playback.h"
#include "pod.h"
@@ -26,7 +25,6 @@
/* *INDENT-OFF* */
enum {
- POD_SYSEX_CLIP = 0x0f,
POD_SYSEX_SAVE = 0x24,
POD_SYSEX_SYSTEM = 0x56,
POD_SYSEX_SYSTEMREQ = 0x57,
@@ -41,11 +39,6 @@
enum {
POD_monitor_level = 0x04,
- POD_routing = 0x05,
- POD_tuner_mute = 0x13,
- POD_tuner_freq = 0x15,
- POD_tuner_note = 0x16,
- POD_tuner_pitch = 0x17,
POD_system_invalid = 0x10000
};
@@ -118,10 +111,6 @@
.bytes_per_frame = POD_BYTES_PER_FRAME
};
-static const char pod_request_channel[] = {
- 0xf0, 0x00, 0x01, 0x0c, 0x03, 0x75, 0xf7
-};
-
static const char pod_version_header[] = {
0xf2, 0x7e, 0x7f, 0x06, 0x02
};
@@ -129,18 +118,6 @@
/* forward declarations: */
static void pod_startup2(unsigned long data);
static void pod_startup3(struct usb_line6_pod *pod);
-static void pod_startup4(struct usb_line6_pod *pod);
-
-/*
- Mark all parameters as dirty and notify waiting processes.
-*/
-static void pod_mark_batch_all_dirty(struct usb_line6_pod *pod)
-{
- int i;
-
- for (i = 0; i < POD_CONTROL_SIZE; i++)
- set_bit(i, pod->param_dirty);
-}
static char *pod_alloc_sysex_buffer(struct usb_line6_pod *pod, int code,
int size)
@@ -150,45 +127,6 @@
}
/*
- Send channel dump data to the PODxt Pro.
-*/
-static void pod_dump(struct usb_line6_pod *pod, const unsigned char *data)
-{
- int size = 1 + sizeof(pod->prog_data);
- char *sysex = pod_alloc_sysex_buffer(pod, POD_SYSEX_DUMP, size);
- if (!sysex)
- return;
- /* Don't know what this is good for, but PODxt Pro transmits it, so we
- * also do... */
- sysex[SYSEX_DATA_OFS] = 5;
- memcpy(sysex + SYSEX_DATA_OFS + 1, data, sizeof(pod->prog_data));
- line6_send_sysex_message(&pod->line6, sysex, size);
- memcpy(&pod->prog_data, data, sizeof(pod->prog_data));
- pod_mark_batch_all_dirty(pod);
- kfree(sysex);
-}
-
-/*
- Store parameter value in driver memory and mark it as dirty.
-*/
-static void pod_store_parameter(struct usb_line6_pod *pod, int param, int value)
-{
- pod->prog_data.control[param] = value;
- set_bit(param, pod->param_dirty);
- pod->dirty = 1;
-}
-
-/*
- Handle SAVE button.
-*/
-static void pod_save_button_pressed(struct usb_line6_pod *pod, int type,
- int index)
-{
- pod->dirty = 0;
- set_bit(POD_SAVE_PRESSED, &pod->atomic_flags);
-}
-
-/*
Process a completely received message.
*/
void line6_pod_process_message(struct usb_line6_pod *pod)
@@ -209,25 +147,11 @@
/* process all remaining messages */
switch (buf[0]) {
case LINE6_PARAM_CHANGE | LINE6_CHANNEL_DEVICE:
- pod_store_parameter(pod, buf[1], buf[2]);
- /* intentionally no break here! */
-
case LINE6_PARAM_CHANGE | LINE6_CHANNEL_HOST:
- if ((buf[1] == POD_amp_model_setup) ||
- (buf[1] == POD_effect_setup))
- /* these also affect other settings */
- line6_dump_request_async(&pod->dumpreq, &pod->line6, 0,
- LINE6_DUMP_CURRENT);
-
break;
case LINE6_PROGRAM_CHANGE | LINE6_CHANNEL_DEVICE:
case LINE6_PROGRAM_CHANGE | LINE6_CHANNEL_HOST:
- pod->channel_num = buf[1];
- pod->dirty = 0;
- set_bit(POD_CHANNEL_DIRTY, &pod->atomic_flags);
- line6_dump_request_async(&pod->dumpreq, &pod->line6, 0,
- LINE6_DUMP_CURRENT);
break;
case LINE6_SYSEX_BEGIN | LINE6_CHANNEL_DEVICE:
@@ -235,43 +159,6 @@
if (memcmp(buf + 1, line6_midi_id, sizeof(line6_midi_id)) == 0) {
switch (buf[5]) {
case POD_SYSEX_DUMP:
- if (pod->line6.message_length ==
- sizeof(pod->prog_data) + 7) {
- switch (pod->dumpreq.in_progress) {
- case LINE6_DUMP_CURRENT:
- memcpy(&pod->prog_data, buf + 7,
- sizeof(pod->prog_data));
- pod_mark_batch_all_dirty(pod);
- break;
-
- case POD_DUMP_MEMORY:
- memcpy(&pod->prog_data_buf,
- buf + 7,
- sizeof
- (pod->prog_data_buf));
- break;
-
- default:
- DEBUG_MESSAGES(dev_err
- (pod->
- line6.ifcdev,
- "unknown dump code %02X\n",
- pod->
- dumpreq.in_progress));
- }
-
- line6_dump_finished(&pod->dumpreq);
- pod_startup3(pod);
- } else
- DEBUG_MESSAGES(dev_err
- (pod->line6.ifcdev,
- "wrong size of channel dump message (%d instead of %d)\n",
- pod->
- line6.message_length,
- (int)
- sizeof(pod->prog_data) +
- 7));
-
break;
case POD_SYSEX_SYSTEM:{
@@ -280,35 +167,8 @@
<< 8) |
((int)buf[9] << 4) | (int)buf[10];
-#define PROCESS_SYSTEM_PARAM(x) \
- case POD_ ## x: \
- pod->x.value = value; \
- wake_up(&pod->x.wait); \
- break;
-
- switch (buf[6]) {
- PROCESS_SYSTEM_PARAM
- (monitor_level);
- PROCESS_SYSTEM_PARAM(routing);
- PROCESS_SYSTEM_PARAM
- (tuner_mute);
- PROCESS_SYSTEM_PARAM
- (tuner_freq);
- PROCESS_SYSTEM_PARAM
- (tuner_note);
- PROCESS_SYSTEM_PARAM
- (tuner_pitch);
-
-#undef PROCESS_SYSTEM_PARAM
-
- default:
- DEBUG_MESSAGES(dev_err
- (pod->
- line6.ifcdev,
- "unknown tuner/system response %02X\n",
- buf[6]));
- }
-
+ if (buf[6] == POD_monitor_level)
+ pod->monitor_level = value;
break;
}
@@ -317,29 +177,18 @@
break;
case POD_SYSEX_SAVE:
- pod_save_button_pressed(pod, buf[6], buf[7]);
- break;
-
- case POD_SYSEX_CLIP:
- DEBUG_MESSAGES(dev_err
- (pod->line6.ifcdev,
- "audio clipped\n"));
- pod->clipping.value = 1;
- wake_up(&pod->clipping.wait);
break;
case POD_SYSEX_STORE:
- DEBUG_MESSAGES(dev_err
- (pod->line6.ifcdev,
- "message %02X not yet implemented\n",
- buf[5]));
+ dev_dbg(pod->line6.ifcdev,
+ "message %02X not yet implemented\n",
+ buf[5]);
break;
default:
- DEBUG_MESSAGES(dev_err
- (pod->line6.ifcdev,
- "unknown sysex message %02X\n",
- buf[5]));
+ dev_dbg(pod->line6.ifcdev,
+ "unknown sysex message %02X\n",
+ buf[5]);
}
} else
if (memcmp
@@ -350,11 +199,9 @@
pod->device_id =
((int)buf[8] << 16) | ((int)buf[9] << 8) | (int)
buf[10];
- pod_startup4(pod);
+ pod_startup3(pod);
} else
- DEBUG_MESSAGES(dev_err
- (pod->line6.ifcdev,
- "unknown sysex header\n"));
+ dev_dbg(pod->line6.ifcdev, "unknown sysex header\n");
break;
@@ -362,349 +209,22 @@
break;
default:
- DEBUG_MESSAGES(dev_err
- (pod->line6.ifcdev,
- "POD: unknown message %02X\n", buf[0]));
+ dev_dbg(pod->line6.ifcdev, "POD: unknown message %02X\n",
+ buf[0]);
}
}
/*
- Detect some cases that require a channel dump after sending a command to the
- device. Important notes:
- *) The actual dump request can not be sent here since we are not allowed to
- wait for the completion of the first message in this context, and sending
- the dump request before completion of the previous message leaves the POD
- in an undefined state. The dump request will be sent when the echoed
- commands are received.
- *) This method fails if a param change message is "chopped" after the first
- byte.
-*/
-void line6_pod_midi_postprocess(struct usb_line6_pod *pod, unsigned char *data,
- int length)
-{
- int i;
-
- if (!pod->midi_postprocess)
- return;
-
- for (i = 0; i < length; ++i) {
- if (data[i] == (LINE6_PROGRAM_CHANGE | LINE6_CHANNEL_HOST)) {
- line6_invalidate_current(&pod->dumpreq);
- break;
- } else
- if ((data[i] == (LINE6_PARAM_CHANGE | LINE6_CHANNEL_HOST))
- && (i < length - 1))
- if ((data[i + 1] == POD_amp_model_setup)
- || (data[i + 1] == POD_effect_setup)) {
- line6_invalidate_current(&pod->dumpreq);
- break;
- }
- }
-}
-
-/*
- Send channel number (i.e., switch to a different sound).
-*/
-static void pod_send_channel(struct usb_line6_pod *pod, u8 value)
-{
- line6_invalidate_current(&pod->dumpreq);
-
- if (line6_send_program(&pod->line6, value) == 0)
- pod->channel_num = value;
- else
- line6_dump_finished(&pod->dumpreq);
-}
-
-/*
Transmit PODxt Pro control parameter.
*/
void line6_pod_transmit_parameter(struct usb_line6_pod *pod, int param,
u8 value)
{
- if (line6_transmit_parameter(&pod->line6, param, value) == 0)
- pod_store_parameter(pod, param, value);
-
- if ((param == POD_amp_model_setup) || (param == POD_effect_setup)) /* these also affect other settings */
- line6_invalidate_current(&pod->dumpreq);
-}
-
-/*
- Resolve value to memory location.
-*/
-static int pod_resolve(const char *buf, short block0, short block1,
- unsigned char *location)
-{
- u8 value;
- short block;
- int ret;
-
- ret = kstrtou8(buf, 10, &value);
- if (ret)
- return ret;
-
- block = (value < 0x40) ? block0 : block1;
- value &= 0x3f;
- location[0] = block >> 7;
- location[1] = value | (block & 0x7f);
- return 0;
-}
-
-/*
- Send command to store channel/effects setup/amp setup to PODxt Pro.
-*/
-static ssize_t pod_send_store_command(struct device *dev, const char *buf,
- size_t count, short block0, short block1)
-{
- struct usb_interface *interface = to_usb_interface(dev);
- struct usb_line6_pod *pod = usb_get_intfdata(interface);
- int ret;
- int size = 3 + sizeof(pod->prog_data_buf);
- char *sysex = pod_alloc_sysex_buffer(pod, POD_SYSEX_STORE, size);
-
- if (!sysex)
- return 0;
-
- sysex[SYSEX_DATA_OFS] = 5; /* see pod_dump() */
- ret = pod_resolve(buf, block0, block1, sysex + SYSEX_DATA_OFS + 1);
- if (ret) {
- kfree(sysex);
- return ret;
- }
-
- memcpy(sysex + SYSEX_DATA_OFS + 3, &pod->prog_data_buf,
- sizeof(pod->prog_data_buf));
-
- line6_send_sysex_message(&pod->line6, sysex, size);
- kfree(sysex);
- /* needs some delay here on AMD64 platform */
- return count;
-}
-
-/*
- Send command to retrieve channel/effects setup/amp setup to PODxt Pro.
-*/
-static ssize_t pod_send_retrieve_command(struct device *dev, const char *buf,
- size_t count, short block0,
- short block1)
-{
- struct usb_interface *interface = to_usb_interface(dev);
- struct usb_line6_pod *pod = usb_get_intfdata(interface);
- int ret;
- int size = 4;
- char *sysex = pod_alloc_sysex_buffer(pod, POD_SYSEX_DUMPMEM, size);
-
- if (!sysex)
- return 0;
-
- ret = pod_resolve(buf, block0, block1, sysex + SYSEX_DATA_OFS);
- if (ret) {
- kfree(sysex);
- return ret;
- }
- sysex[SYSEX_DATA_OFS + 2] = 0;
- sysex[SYSEX_DATA_OFS + 3] = 0;
- line6_dump_started(&pod->dumpreq, POD_DUMP_MEMORY);
-
- if (line6_send_sysex_message(&pod->line6, sysex, size) < size)
- line6_dump_finished(&pod->dumpreq);
-
- kfree(sysex);
- /* needs some delay here on AMD64 platform */
- return count;
-}
-
-/*
- Generic get name function.
-*/
-static ssize_t get_name_generic(struct usb_line6_pod *pod, const char *str,
- char *buf)
-{
- int length = 0;
- const char *p1;
- char *p2;
- char *last_non_space = buf;
-
- int retval = line6_dump_wait_interruptible(&pod->dumpreq);
- if (retval < 0)
- return retval;
-
- for (p1 = str, p2 = buf; *p1; ++p1, ++p2) {
- *p2 = *p1;
- if (*p2 != ' ')
- last_non_space = p2;
- if (++length == POD_NAME_LENGTH)
- break;
- }
-
- *(last_non_space + 1) = '\n';
- return last_non_space - buf + 2;
-}
-
-/*
- "read" request on "channel" special file.
-*/
-static ssize_t pod_get_channel(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct usb_interface *interface = to_usb_interface(dev);
- struct usb_line6_pod *pod = usb_get_intfdata(interface);
- return sprintf(buf, "%d\n", pod->channel_num);
-}
-
-/*
- "write" request on "channel" special file.
-*/
-static ssize_t pod_set_channel(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct usb_interface *interface = to_usb_interface(dev);
- struct usb_line6_pod *pod = usb_get_intfdata(interface);
- u8 value;
- int ret;
-
- ret = kstrtou8(buf, 10, &value);
- if (ret)
- return ret;
-
- pod_send_channel(pod, value);
- return count;
-}
-
-/*
- "read" request on "name" special file.
-*/
-static ssize_t pod_get_name(struct device *dev, struct device_attribute *attr,
- char *buf)
-{
- struct usb_interface *interface = to_usb_interface(dev);
- struct usb_line6_pod *pod = usb_get_intfdata(interface);
- return get_name_generic(pod, pod->prog_data.header + POD_NAME_OFFSET,
- buf);
-}
-
-/*
- "read" request on "name" special file.
-*/
-static ssize_t pod_get_name_buf(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct usb_interface *interface = to_usb_interface(dev);
- struct usb_line6_pod *pod = usb_get_intfdata(interface);
- return get_name_generic(pod,
- pod->prog_data_buf.header + POD_NAME_OFFSET,
- buf);
-}
-
-/*
- "read" request on "dump" special file.
-*/
-static ssize_t pod_get_dump(struct device *dev, struct device_attribute *attr,
- char *buf)
-{
- struct usb_interface *interface = to_usb_interface(dev);
- struct usb_line6_pod *pod = usb_get_intfdata(interface);
- int retval = line6_dump_wait_interruptible(&pod->dumpreq);
- if (retval < 0)
- return retval;
- memcpy(buf, &pod->prog_data, sizeof(pod->prog_data));
- return sizeof(pod->prog_data);
-}
-
-/*
- "write" request on "dump" special file.
-*/
-static ssize_t pod_set_dump(struct device *dev, struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct usb_interface *interface = to_usb_interface(dev);
- struct usb_line6_pod *pod = usb_get_intfdata(interface);
-
- if (count != sizeof(pod->prog_data)) {
- dev_err(pod->line6.ifcdev,
- "data block must be exactly %d bytes\n",
- (int)sizeof(pod->prog_data));
- return -EINVAL;
- }
-
- pod_dump(pod, buf);
- return sizeof(pod->prog_data);
-}
-
-/*
- Identify system parameters related to the tuner.
-*/
-static bool pod_is_tuner(int code)
-{
- return
- (code == POD_tuner_mute) ||
- (code == POD_tuner_freq) ||
- (code == POD_tuner_note) || (code == POD_tuner_pitch);
-}
-
-/*
- Get system parameter (as integer).
- @param tuner non-zero, if code refers to a tuner parameter
-*/
-static int pod_get_system_param_int(struct usb_line6_pod *pod, int *value,
- int code, struct ValueWait *param, int sign)
-{
- char *sysex;
- static const int size = 1;
- int retval = 0;
-
- if (((pod->prog_data.control[POD_tuner] & 0x40) == 0)
- && pod_is_tuner(code))
- return -ENODEV;
-
- /* send value request to device: */
- param->value = POD_system_invalid;
- sysex = pod_alloc_sysex_buffer(pod, POD_SYSEX_SYSTEMREQ, size);
-
- if (!sysex)
- return -ENOMEM;
-
- sysex[SYSEX_DATA_OFS] = code;
- line6_send_sysex_message(&pod->line6, sysex, size);
- kfree(sysex);
-
- /* wait for device to respond: */
- retval =
- wait_event_interruptible(param->wait,
- param->value != POD_system_invalid);
-
- if (retval < 0)
- return retval;
-
- *value = sign ? (int)(signed short)param->value : (int)(unsigned short)
- param->value;
-
- if (*value == POD_system_invalid)
- *value = 0; /* don't report uninitialized values */
-
- return 0;
-}
-
-/*
- Get system parameter (as string).
- @param tuner non-zero, if code refers to a tuner parameter
-*/
-static ssize_t pod_get_system_param_string(struct usb_line6_pod *pod, char *buf,
- int code, struct ValueWait *param,
- int sign)
-{
- int retval, value = 0;
- retval = pod_get_system_param_int(pod, &value, code, param, sign);
-
- if (retval < 0)
- return retval;
-
- return sprintf(buf, "%d\n", value);
+ line6_transmit_parameter(&pod->line6, param, value);
}
/*
Send system parameter (from integer).
- @param tuner non-zero, if code refers to a tuner parameter
*/
static int pod_set_system_param_int(struct usb_line6_pod *pod, int value,
int code)
@@ -712,11 +232,6 @@
char *sysex;
static const int size = 5;
- if (((pod->prog_data.control[POD_tuner] & 0x40) == 0)
- && pod_is_tuner(code))
- return -EINVAL;
-
- /* send value to tuner: */
sysex = pod_alloc_sysex_buffer(pod, POD_SYSEX_SYSTEM, size);
if (!sysex)
return -ENOMEM;
@@ -731,179 +246,6 @@
}
/*
- Send system parameter (from string).
- @param tuner non-zero, if code refers to a tuner parameter
-*/
-static ssize_t pod_set_system_param_string(struct usb_line6_pod *pod,
- const char *buf, int count, int code,
- unsigned short mask)
-{
- int retval;
- unsigned short value = simple_strtoul(buf, NULL, 10) & mask;
- retval = pod_set_system_param_int(pod, value, code);
- return (retval < 0) ? retval : count;
-}
-
-/*
- "read" request on "dump_buf" special file.
-*/
-static ssize_t pod_get_dump_buf(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct usb_interface *interface = to_usb_interface(dev);
- struct usb_line6_pod *pod = usb_get_intfdata(interface);
- int retval = line6_dump_wait_interruptible(&pod->dumpreq);
- if (retval < 0)
- return retval;
- memcpy(buf, &pod->prog_data_buf, sizeof(pod->prog_data_buf));
- return sizeof(pod->prog_data_buf);
-}
-
-/*
- "write" request on "dump_buf" special file.
-*/
-static ssize_t pod_set_dump_buf(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct usb_interface *interface = to_usb_interface(dev);
- struct usb_line6_pod *pod = usb_get_intfdata(interface);
-
- if (count != sizeof(pod->prog_data)) {
- dev_err(pod->line6.ifcdev,
- "data block must be exactly %d bytes\n",
- (int)sizeof(pod->prog_data));
- return -EINVAL;
- }
-
- memcpy(&pod->prog_data_buf, buf, sizeof(pod->prog_data));
- return sizeof(pod->prog_data);
-}
-
-/*
- "write" request on "finish" special file.
-*/
-static ssize_t pod_set_finish(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct usb_interface *interface = to_usb_interface(dev);
- struct usb_line6_pod *pod = usb_get_intfdata(interface);
- int size = 0;
- char *sysex = pod_alloc_sysex_buffer(pod, POD_SYSEX_FINISH, size);
- if (!sysex)
- return 0;
- line6_send_sysex_message(&pod->line6, sysex, size);
- kfree(sysex);
- return count;
-}
-
-/*
- "write" request on "store_channel" special file.
-*/
-static ssize_t pod_set_store_channel(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- return pod_send_store_command(dev, buf, count, 0x0000, 0x00c0);
-}
-
-/*
- "write" request on "store_effects_setup" special file.
-*/
-static ssize_t pod_set_store_effects_setup(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- return pod_send_store_command(dev, buf, count, 0x0080, 0x0080);
-}
-
-/*
- "write" request on "store_amp_setup" special file.
-*/
-static ssize_t pod_set_store_amp_setup(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- return pod_send_store_command(dev, buf, count, 0x0040, 0x0100);
-}
-
-/*
- "write" request on "retrieve_channel" special file.
-*/
-static ssize_t pod_set_retrieve_channel(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- return pod_send_retrieve_command(dev, buf, count, 0x0000, 0x00c0);
-}
-
-/*
- "write" request on "retrieve_effects_setup" special file.
-*/
-static ssize_t pod_set_retrieve_effects_setup(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- return pod_send_retrieve_command(dev, buf, count, 0x0080, 0x0080);
-}
-
-/*
- "write" request on "retrieve_amp_setup" special file.
-*/
-static ssize_t pod_set_retrieve_amp_setup(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- return pod_send_retrieve_command(dev, buf, count, 0x0040, 0x0100);
-}
-
-/*
- "read" request on "dirty" special file.
-*/
-static ssize_t pod_get_dirty(struct device *dev, struct device_attribute *attr,
- char *buf)
-{
- struct usb_interface *interface = to_usb_interface(dev);
- struct usb_line6_pod *pod = usb_get_intfdata(interface);
- buf[0] = pod->dirty ? '1' : '0';
- buf[1] = '\n';
- return 2;
-}
-
-/*
- "read" request on "midi_postprocess" special file.
-*/
-static ssize_t pod_get_midi_postprocess(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct usb_interface *interface = to_usb_interface(dev);
- struct usb_line6_pod *pod = usb_get_intfdata(interface);
- return sprintf(buf, "%d\n", pod->midi_postprocess);
-}
-
-/*
- "write" request on "midi_postprocess" special file.
-*/
-static ssize_t pod_set_midi_postprocess(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct usb_interface *interface = to_usb_interface(dev);
- struct usb_line6_pod *pod = usb_get_intfdata(interface);
- u8 value;
- int ret;
-
- ret = kstrtou8(buf, 10, &value);
- if (ret)
- return ret;
-
- pod->midi_postprocess = value ? 1 : 0;
- return count;
-}
-
-/*
"read" request on "serial_number" special file.
*/
static ssize_t pod_get_serial_number(struct device *dev,
@@ -939,18 +281,6 @@
}
/*
- "read" request on "clip" special file.
-*/
-static ssize_t pod_wait_for_clip(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct usb_interface *interface = to_usb_interface(dev);
- struct usb_line6_pod *pod = usb_get_intfdata(interface);
- return wait_event_interruptible(pod->clipping.wait,
- pod->clipping.value != 0);
-}
-
-/*
POD startup procedure.
This is a sequence of functions with special requirements (e.g., must
not run immediately after initialization, must not run in interrupt
@@ -969,22 +299,6 @@
static void pod_startup2(unsigned long data)
{
struct usb_line6_pod *pod = (struct usb_line6_pod *)data;
-
- /* schedule another startup procedure until startup is complete: */
- if (pod->startup_progress >= POD_STARTUP_LAST)
- return;
-
- pod->startup_progress = POD_STARTUP_DUMPREQ;
- line6_start_timer(&pod->startup_timer, POD_STARTUP_DELAY, pod_startup2,
- (unsigned long)pod);
-
- /* current channel dump: */
- line6_dump_request_async(&pod->dumpreq, &pod->line6, 0,
- LINE6_DUMP_CURRENT);
-}
-
-static void pod_startup3(struct usb_line6_pod *pod)
-{
struct usb_line6 *line6 = &pod->line6;
CHECK_STARTUP_PROGRESS(pod->startup_progress, POD_STARTUP_VERSIONREQ);
@@ -992,7 +306,7 @@
line6_version_request_async(line6);
}
-static void pod_startup4(struct usb_line6_pod *pod)
+static void pod_startup3(struct usb_line6_pod *pod)
{
CHECK_STARTUP_PROGRESS(pod->startup_progress, POD_STARTUP_WORKQUEUE);
@@ -1000,7 +314,7 @@
schedule_work(&pod->startup_work);
}
-static void pod_startup5(struct work_struct *work)
+static void pod_startup4(struct work_struct *work)
{
struct usb_line6_pod *pod =
container_of(work, struct usb_line6_pod, startup_work);
@@ -1013,87 +327,14 @@
/* ALSA audio interface: */
line6_register_audio(line6);
-
- /* device files: */
- line6_pod_create_files(pod->firmware_version,
- line6->properties->device_bit, line6->ifcdev);
}
-#define POD_GET_SYSTEM_PARAM(code, sign) \
-static ssize_t pod_get_ ## code(struct device *dev, \
- struct device_attribute *attr, char *buf) \
-{ \
- struct usb_interface *interface = to_usb_interface(dev); \
- struct usb_line6_pod *pod = usb_get_intfdata(interface); \
- return pod_get_system_param_string(pod, buf, POD_ ## code, \
- &pod->code, sign); \
-}
-
-#define POD_GET_SET_SYSTEM_PARAM(code, mask, sign) \
-POD_GET_SYSTEM_PARAM(code, sign) \
-static ssize_t pod_set_ ## code(struct device *dev, \
- struct device_attribute *attr, \
- const char *buf, size_t count) \
-{ \
- struct usb_interface *interface = to_usb_interface(dev); \
- struct usb_line6_pod *pod = usb_get_intfdata(interface); \
- return pod_set_system_param_string(pod, buf, count, POD_ ## code, mask); \
-}
-
-POD_GET_SET_SYSTEM_PARAM(monitor_level, 0xffff, 0);
-POD_GET_SET_SYSTEM_PARAM(routing, 0x0003, 0);
-POD_GET_SET_SYSTEM_PARAM(tuner_mute, 0x0001, 0);
-POD_GET_SET_SYSTEM_PARAM(tuner_freq, 0xffff, 0);
-POD_GET_SYSTEM_PARAM(tuner_note, 1);
-POD_GET_SYSTEM_PARAM(tuner_pitch, 1);
-
-#undef GET_SET_SYSTEM_PARAM
-#undef GET_SYSTEM_PARAM
-
/* POD special files: */
-static DEVICE_ATTR(channel, S_IWUSR | S_IRUGO, pod_get_channel,
- pod_set_channel);
-static DEVICE_ATTR(clip, S_IRUGO, pod_wait_for_clip, line6_nop_write);
static DEVICE_ATTR(device_id, S_IRUGO, pod_get_device_id, line6_nop_write);
-static DEVICE_ATTR(dirty, S_IRUGO, pod_get_dirty, line6_nop_write);
-static DEVICE_ATTR(dump, S_IWUSR | S_IRUGO, pod_get_dump, pod_set_dump);
-static DEVICE_ATTR(dump_buf, S_IWUSR | S_IRUGO, pod_get_dump_buf,
- pod_set_dump_buf);
-static DEVICE_ATTR(finish, S_IWUSR, line6_nop_read, pod_set_finish);
static DEVICE_ATTR(firmware_version, S_IRUGO, pod_get_firmware_version,
line6_nop_write);
-static DEVICE_ATTR(midi_postprocess, S_IWUSR | S_IRUGO,
- pod_get_midi_postprocess, pod_set_midi_postprocess);
-static DEVICE_ATTR(monitor_level, S_IWUSR | S_IRUGO, pod_get_monitor_level,
- pod_set_monitor_level);
-static DEVICE_ATTR(name, S_IRUGO, pod_get_name, line6_nop_write);
-static DEVICE_ATTR(name_buf, S_IRUGO, pod_get_name_buf, line6_nop_write);
-static DEVICE_ATTR(retrieve_amp_setup, S_IWUSR, line6_nop_read,
- pod_set_retrieve_amp_setup);
-static DEVICE_ATTR(retrieve_channel, S_IWUSR, line6_nop_read,
- pod_set_retrieve_channel);
-static DEVICE_ATTR(retrieve_effects_setup, S_IWUSR, line6_nop_read,
- pod_set_retrieve_effects_setup);
-static DEVICE_ATTR(routing, S_IWUSR | S_IRUGO, pod_get_routing,
- pod_set_routing);
static DEVICE_ATTR(serial_number, S_IRUGO, pod_get_serial_number,
line6_nop_write);
-static DEVICE_ATTR(store_amp_setup, S_IWUSR, line6_nop_read,
- pod_set_store_amp_setup);
-static DEVICE_ATTR(store_channel, S_IWUSR, line6_nop_read,
- pod_set_store_channel);
-static DEVICE_ATTR(store_effects_setup, S_IWUSR, line6_nop_read,
- pod_set_store_effects_setup);
-static DEVICE_ATTR(tuner_freq, S_IWUSR | S_IRUGO, pod_get_tuner_freq,
- pod_set_tuner_freq);
-static DEVICE_ATTR(tuner_mute, S_IWUSR | S_IRUGO, pod_get_tuner_mute,
- pod_set_tuner_mute);
-static DEVICE_ATTR(tuner_note, S_IRUGO, pod_get_tuner_note, line6_nop_write);
-static DEVICE_ATTR(tuner_pitch, S_IRUGO, pod_get_tuner_pitch, line6_nop_write);
-
-#ifdef CONFIG_LINE6_USB_RAW
-static DEVICE_ATTR(raw, S_IWUSR, line6_nop_read, line6_set_raw);
-#endif
/* control info callback */
static int snd_pod_control_monitor_info(struct snd_kcontrol *kcontrol,
@@ -1112,7 +353,7 @@
{
struct snd_line6_pcm *line6pcm = snd_kcontrol_chip(kcontrol);
struct usb_line6_pod *pod = (struct usb_line6_pod *)line6pcm->line6;
- ucontrol->value.integer.value[0] = pod->monitor_level.value;
+ ucontrol->value.integer.value[0] = pod->monitor_level;
return 0;
}
@@ -1123,10 +364,10 @@
struct snd_line6_pcm *line6pcm = snd_kcontrol_chip(kcontrol);
struct usb_line6_pod *pod = (struct usb_line6_pod *)line6pcm->line6;
- if (ucontrol->value.integer.value[0] == pod->monitor_level.value)
+ if (ucontrol->value.integer.value[0] == pod->monitor_level)
return 0;
- pod->monitor_level.value = ucontrol->value.integer.value[0];
+ pod->monitor_level = ucontrol->value.integer.value[0];
pod_set_system_param_int(pod, ucontrol->value.integer.value[0],
POD_monitor_level);
return 1;
@@ -1156,9 +397,6 @@
del_timer(&pod->startup_timer);
cancel_work_sync(&pod->startup_work);
-
- /* free dump request data: */
- line6_dumpreq_destruct(&pod->dumpreq);
}
/*
@@ -1168,35 +406,9 @@
{
int err;
- CHECK_RETURN(device_create_file(dev, &dev_attr_channel));
- CHECK_RETURN(device_create_file(dev, &dev_attr_clip));
CHECK_RETURN(device_create_file(dev, &dev_attr_device_id));
- CHECK_RETURN(device_create_file(dev, &dev_attr_dirty));
- CHECK_RETURN(device_create_file(dev, &dev_attr_dump));
- CHECK_RETURN(device_create_file(dev, &dev_attr_dump_buf));
- CHECK_RETURN(device_create_file(dev, &dev_attr_finish));
CHECK_RETURN(device_create_file(dev, &dev_attr_firmware_version));
- CHECK_RETURN(device_create_file(dev, &dev_attr_midi_postprocess));
- CHECK_RETURN(device_create_file(dev, &dev_attr_monitor_level));
- CHECK_RETURN(device_create_file(dev, &dev_attr_name));
- CHECK_RETURN(device_create_file(dev, &dev_attr_name_buf));
- CHECK_RETURN(device_create_file(dev, &dev_attr_retrieve_amp_setup));
- CHECK_RETURN(device_create_file(dev, &dev_attr_retrieve_channel));
- CHECK_RETURN(device_create_file(dev, &dev_attr_retrieve_effects_setup));
- CHECK_RETURN(device_create_file(dev, &dev_attr_routing));
CHECK_RETURN(device_create_file(dev, &dev_attr_serial_number));
- CHECK_RETURN(device_create_file(dev, &dev_attr_store_amp_setup));
- CHECK_RETURN(device_create_file(dev, &dev_attr_store_channel));
- CHECK_RETURN(device_create_file(dev, &dev_attr_store_effects_setup));
- CHECK_RETURN(device_create_file(dev, &dev_attr_tuner_freq));
- CHECK_RETURN(device_create_file(dev, &dev_attr_tuner_mute));
- CHECK_RETURN(device_create_file(dev, &dev_attr_tuner_note));
- CHECK_RETURN(device_create_file(dev, &dev_attr_tuner_pitch));
-
-#ifdef CONFIG_LINE6_USB_RAW
- CHECK_RETURN(device_create_file(dev, &dev_attr_raw));
-#endif
-
return 0;
}
@@ -1210,32 +422,11 @@
struct usb_line6 *line6 = &pod->line6;
init_timer(&pod->startup_timer);
- INIT_WORK(&pod->startup_work, pod_startup5);
+ INIT_WORK(&pod->startup_work, pod_startup4);
if ((interface == NULL) || (pod == NULL))
return -ENODEV;
- pod->channel_num = 255;
-
- /* initialize wait queues: */
- init_waitqueue_head(&pod->monitor_level.wait);
- init_waitqueue_head(&pod->routing.wait);
- init_waitqueue_head(&pod->tuner_mute.wait);
- init_waitqueue_head(&pod->tuner_freq.wait);
- init_waitqueue_head(&pod->tuner_note.wait);
- init_waitqueue_head(&pod->tuner_pitch.wait);
- init_waitqueue_head(&pod->clipping.wait);
-
- memset(pod->param_dirty, 0xff, sizeof(pod->param_dirty));
-
- /* initialize USB buffers: */
- err = line6_dumpreq_init(&pod->dumpreq, pod_request_channel,
- sizeof(pod_request_channel));
- if (err < 0) {
- dev_err(&interface->dev, "Out of memory\n");
- return -ENOMEM;
- }
-
/* create sysfs entries: */
err = pod_create_files2(&interface->dev);
if (err < 0)
@@ -1269,7 +460,7 @@
*/
if (pod->line6.properties->capabilities & LINE6_BIT_CONTROL) {
- pod->monitor_level.value = POD_system_invalid;
+ pod->monitor_level = POD_system_invalid;
/* initiate startup procedure: */
pod_startup1(pod);
@@ -1311,39 +502,9 @@
if (dev != NULL) {
/* remove sysfs entries: */
- line6_pod_remove_files(pod->firmware_version,
- pod->line6.
- properties->device_bit, dev);
-
- device_remove_file(dev, &dev_attr_channel);
- device_remove_file(dev, &dev_attr_clip);
device_remove_file(dev, &dev_attr_device_id);
- device_remove_file(dev, &dev_attr_dirty);
- device_remove_file(dev, &dev_attr_dump);
- device_remove_file(dev, &dev_attr_dump_buf);
- device_remove_file(dev, &dev_attr_finish);
device_remove_file(dev, &dev_attr_firmware_version);
- device_remove_file(dev, &dev_attr_midi_postprocess);
- device_remove_file(dev, &dev_attr_monitor_level);
- device_remove_file(dev, &dev_attr_name);
- device_remove_file(dev, &dev_attr_name_buf);
- device_remove_file(dev, &dev_attr_retrieve_amp_setup);
- device_remove_file(dev, &dev_attr_retrieve_channel);
- device_remove_file(dev,
- &dev_attr_retrieve_effects_setup);
- device_remove_file(dev, &dev_attr_routing);
device_remove_file(dev, &dev_attr_serial_number);
- device_remove_file(dev, &dev_attr_store_amp_setup);
- device_remove_file(dev, &dev_attr_store_channel);
- device_remove_file(dev, &dev_attr_store_effects_setup);
- device_remove_file(dev, &dev_attr_tuner_freq);
- device_remove_file(dev, &dev_attr_tuner_mute);
- device_remove_file(dev, &dev_attr_tuner_note);
- device_remove_file(dev, &dev_attr_tuner_pitch);
-
-#ifdef CONFIG_LINE6_USB_RAW
- device_remove_file(dev, &dev_attr_raw);
-#endif
}
}
diff --git a/drivers/staging/line6/pod.h b/drivers/staging/line6/pod.h
index 47e0d1a..3e3f167 100644
--- a/drivers/staging/line6/pod.h
+++ b/drivers/staging/line6/pod.h
@@ -15,12 +15,10 @@
#include <linux/interrupt.h>
#include <linux/spinlock.h>
#include <linux/usb.h>
-#include <linux/wait.h>
#include <sound/core.h>
#include "driver.h"
-#include "dumprequest.h"
/*
PODxt Live interfaces
@@ -46,37 +44,12 @@
*/
enum {
POD_STARTUP_INIT = 1,
- POD_STARTUP_DUMPREQ,
POD_STARTUP_VERSIONREQ,
POD_STARTUP_WORKQUEUE,
POD_STARTUP_SETUP,
POD_STARTUP_LAST = POD_STARTUP_SETUP - 1
};
-/**
- Data structure for values that need to be requested explicitly.
- This is the case for system and tuner settings.
-*/
-struct ValueWait {
- int value;
- wait_queue_head_t wait;
-};
-
-/**
- Binary PODxt Pro program dump
-*/
-struct pod_program {
- /**
- Header information (including program name).
- */
- unsigned char header[0x20];
-
- /**
- Program parameters.
- */
- unsigned char control[POD_CONTROL_SIZE];
-};
-
struct usb_line6_pod {
/**
Generic Line6 USB data.
@@ -84,63 +57,9 @@
struct usb_line6 line6;
/**
- Dump request structure.
- */
- struct line6_dump_request dumpreq;
-
- /**
- Current program number.
- */
- unsigned char channel_num;
-
- /**
- Current program settings.
- */
- struct pod_program prog_data;
-
- /**
- Buffer for data retrieved from or to be stored on PODxt Pro.
- */
- struct pod_program prog_data_buf;
-
- /**
- Tuner mute mode.
- */
- struct ValueWait tuner_mute;
-
- /**
- Tuner base frequency (typically 440Hz).
- */
- struct ValueWait tuner_freq;
-
- /**
- Note received from tuner.
- */
- struct ValueWait tuner_note;
-
- /**
- Pitch value received from tuner.
- */
- struct ValueWait tuner_pitch;
-
- /**
Instrument monitor level.
*/
- struct ValueWait monitor_level;
-
- /**
- Audio routing mode.
- 0: send processed guitar
- 1: send clean guitar
- 2: send clean guitar re-amp playback
- 3: send re-amp playback
- */
- struct ValueWait routing;
-
- /**
- Wait for audio clipping event.
- */
- struct ValueWait clipping;
+ int monitor_level;
/**
Timer for device initializaton.
@@ -158,16 +77,6 @@
int startup_progress;
/**
- Dirty flags for access to parameter data.
- */
- unsigned long param_dirty[POD_CONTROL_SIZE / sizeof(unsigned long)];
-
- /**
- Some atomic flags.
- */
- unsigned long atomic_flags;
-
- /**
Serial number of device.
*/
int serial_number;
@@ -181,23 +90,11 @@
Device ID.
*/
int device_id;
-
- /**
- Flag to indicate modification of current program settings.
- */
- char dirty;
-
- /**
- Flag to enable MIDI postprocessing.
- */
- char midi_postprocess;
};
extern void line6_pod_disconnect(struct usb_interface *interface);
extern int line6_pod_init(struct usb_interface *interface,
struct usb_line6_pod *pod);
-extern void line6_pod_midi_postprocess(struct usb_line6_pod *pod,
- unsigned char *data, int length);
extern void line6_pod_process_message(struct usb_line6_pod *pod);
extern void line6_pod_transmit_parameter(struct usb_line6_pod *pod, int param,
u8 value);
diff --git a/drivers/staging/line6/toneport.c b/drivers/staging/line6/toneport.c
index 31b624b..a529dd3 100644
--- a/drivers/staging/line6/toneport.c
+++ b/drivers/staging/line6/toneport.c
@@ -127,13 +127,11 @@
const char *buf, size_t count)
{
int retval;
- long value;
- retval = strict_strtol(buf, 10, &value);
+ retval = kstrtoint(buf, 10, &led_red);
if (retval)
return retval;
- led_red = value;
toneport_update_led(dev);
return count;
}
@@ -143,13 +141,11 @@
const char *buf, size_t count)
{
int retval;
- long value;
- retval = strict_strtol(buf, 10, &value);
+ retval = kstrtoint(buf, 10, &led_green);
if (retval)
return retval;
- led_green = value;
toneport_update_led(dev);
return count;
}
diff --git a/drivers/staging/line6/usbdefs.h b/drivers/staging/line6/usbdefs.h
index 353d59d..43eb540 100644
--- a/drivers/staging/line6/usbdefs.h
+++ b/drivers/staging/line6/usbdefs.h
@@ -83,11 +83,15 @@
LINE6_BIT(VARIAX),
LINE6_BITS_PRO = LINE6_BIT_BASSPODXTPRO | LINE6_BIT_PODXTPRO,
- LINE6_BITS_LIVE = LINE6_BIT_BASSPODXTLIVE | LINE6_BIT_PODXTLIVE | LINE6_BIT_PODX3LIVE,
- LINE6_BITS_PODXTALL = LINE6_BIT_PODXT | LINE6_BIT_PODXTLIVE | LINE6_BIT_PODXTPRO,
+ LINE6_BITS_LIVE = LINE6_BIT_BASSPODXTLIVE | LINE6_BIT_PODXTLIVE |
+ LINE6_BIT_PODX3LIVE,
+ LINE6_BITS_PODXTALL = LINE6_BIT_PODXT | LINE6_BIT_PODXTLIVE |
+ LINE6_BIT_PODXTPRO,
LINE6_BITS_PODX3ALL = LINE6_BIT_PODX3 | LINE6_BIT_PODX3LIVE,
LINE6_BITS_PODHDALL = LINE6_BIT_PODHD300 | LINE6_BIT_PODHD500,
- LINE6_BITS_BASSPODXTALL = LINE6_BIT_BASSPODXT | LINE6_BIT_BASSPODXTLIVE | LINE6_BIT_BASSPODXTPRO
+ LINE6_BITS_BASSPODXTALL = LINE6_BIT_BASSPODXT |
+ LINE6_BIT_BASSPODXTLIVE |
+ LINE6_BIT_BASSPODXTPRO
};
/* device supports settings parameter via USB */
diff --git a/drivers/staging/line6/variax.c b/drivers/staging/line6/variax.c
index f97416b..4fca58f 100644
--- a/drivers/staging/line6/variax.c
+++ b/drivers/staging/line6/variax.c
@@ -12,28 +12,13 @@
#include <linux/slab.h>
#include "audio.h"
-#include "control.h"
#include "driver.h"
#include "variax.h"
-#define VARIAX_SYSEX_CODE 7
-#define VARIAX_SYSEX_PARAM 0x3b
-#define VARIAX_SYSEX_ACTIVATE 0x2a
-#define VARIAX_MODEL_HEADER_LENGTH 7
-#define VARIAX_MODEL_MESSAGE_LENGTH 199
#define VARIAX_OFFSET_ACTIVATE 7
/*
This message is sent by the device during initialization and identifies
- the connected guitar model.
-*/
-static const char variax_init_model[] = {
- 0xf0, 0x00, 0x01, 0x0c, 0x07, 0x00, 0x69, 0x02,
- 0x00
-};
-
-/*
- This message is sent by the device during initialization and identifies
the connected guitar version.
*/
static const char variax_init_version[] = {
@@ -53,43 +38,11 @@
0xf7
};
-static const char variax_request_bank[] = {
- 0xf0, 0x00, 0x01, 0x0c, 0x07, 0x00, 0x6d, 0xf7
-};
-
-static const char variax_request_model1[] = {
- 0xf0, 0x00, 0x01, 0x0c, 0x07, 0x00, 0x3c, 0x00,
- 0x02, 0x00, 0x00, 0x00, 0x00, 0x03, 0x05, 0x03,
- 0x00, 0x00, 0x00, 0xf7
-};
-
-static const char variax_request_model2[] = {
- 0xf0, 0x00, 0x01, 0x0c, 0x07, 0x00, 0x3c, 0x00,
- 0x02, 0x00, 0x00, 0x00, 0x00, 0x03, 0x07, 0x03,
- 0x00, 0x00, 0x00, 0xf7
-};
-
/* forward declarations: */
-static int variax_create_files2(struct device *dev);
static void variax_startup2(unsigned long data);
static void variax_startup4(unsigned long data);
static void variax_startup5(unsigned long data);
-/*
- Decode data transmitted by workbench.
-*/
-static void variax_decode(const unsigned char *raw_data, unsigned char *data,
- int raw_size)
-{
- for (; raw_size > 0; raw_size -= 6) {
- data[2] = raw_data[0] | (raw_data[1] << 4);
- data[1] = raw_data[2] | (raw_data[3] << 4);
- data[0] = raw_data[4] | (raw_data[5] << 4);
- raw_data += 6;
- data += 3;
- }
-}
-
static void variax_activate_async(struct usb_line6_variax *variax, int a)
{
variax->buffer_activate[VARIAX_OFFSET_ACTIVATE] = a;
@@ -155,37 +108,21 @@
{
struct usb_line6_variax *variax = (struct usb_line6_variax *)data;
CHECK_STARTUP_PROGRESS(variax->startup_progress,
- VARIAX_STARTUP_DUMPREQ);
-
- /* current model dump: */
- line6_dump_request_async(&variax->dumpreq, &variax->line6, 0,
- VARIAX_DUMP_PASS1);
- /* passes 2 and 3 are performed implicitly before entering variax_startup6 */
-}
-
-static void variax_startup6(struct usb_line6_variax *variax)
-{
- CHECK_STARTUP_PROGRESS(variax->startup_progress,
VARIAX_STARTUP_WORKQUEUE);
/* schedule work for global work queue: */
schedule_work(&variax->startup_work);
}
-static void variax_startup7(struct work_struct *work)
+static void variax_startup6(struct work_struct *work)
{
struct usb_line6_variax *variax =
container_of(work, struct usb_line6_variax, startup_work);
- struct usb_line6 *line6 = &variax->line6;
CHECK_STARTUP_PROGRESS(variax->startup_progress, VARIAX_STARTUP_SETUP);
/* ALSA audio interface: */
line6_register_audio(&variax->line6);
-
- /* device files: */
- line6_variax_create_files(0, 0, line6->ifcdev);
- variax_create_files2(line6->ifcdev);
}
/*
@@ -197,22 +134,10 @@
switch (buf[0]) {
case LINE6_PARAM_CHANGE | LINE6_CHANNEL_HOST:
- switch (buf[1]) {
- case VARIAXMIDI_volume:
- variax->volume = buf[2];
- break;
-
- case VARIAXMIDI_tone:
- variax->tone = buf[2];
- }
-
break;
case LINE6_PROGRAM_CHANGE | LINE6_CHANNEL_DEVICE:
case LINE6_PROGRAM_CHANGE | LINE6_CHANNEL_HOST:
- variax->model = buf[1];
- line6_dump_request_async(&variax->dumpreq, &variax->line6, 0,
- VARIAX_DUMP_PASS1);
break;
case LINE6_RESET:
@@ -220,353 +145,26 @@
break;
case LINE6_SYSEX_BEGIN:
- if (memcmp(buf + 1, variax_request_model1 + 1,
- VARIAX_MODEL_HEADER_LENGTH - 1) == 0) {
- if (variax->line6.message_length ==
- VARIAX_MODEL_MESSAGE_LENGTH) {
- switch (variax->dumpreq.in_progress) {
- case VARIAX_DUMP_PASS1:
- variax_decode(buf +
- VARIAX_MODEL_HEADER_LENGTH,
- (unsigned char *)
- &variax->model_data,
- (sizeof
- (variax->model_data.
- name) +
- sizeof(variax->
- model_data.
- control)
- / 2) * 2);
- line6_dump_request_async
- (&variax->dumpreq, &variax->line6,
- 1, VARIAX_DUMP_PASS2);
- break;
-
- case VARIAX_DUMP_PASS2:
- /* model name is transmitted twice, so skip it here: */
- variax_decode(buf +
- VARIAX_MODEL_HEADER_LENGTH,
- (unsigned char *)
- &variax->
- model_data.control +
- sizeof(variax->model_data.
- control)
- / 2,
- sizeof(variax->model_data.
- control)
- / 2 * 2);
- line6_dump_request_async
- (&variax->dumpreq, &variax->line6,
- 2, VARIAX_DUMP_PASS3);
- }
- } else {
- DEBUG_MESSAGES(dev_err
- (variax->line6.ifcdev,
- "illegal length %d of model data\n",
- variax->line6.message_length));
- line6_dump_finished(&variax->dumpreq);
- }
- } else if (memcmp(buf + 1, variax_request_bank + 1,
- sizeof(variax_request_bank) - 2) == 0) {
- memcpy(variax->bank,
- buf + sizeof(variax_request_bank) - 1,
- sizeof(variax->bank));
- line6_dump_finished(&variax->dumpreq);
- variax_startup6(variax);
- } else if (memcmp(buf + 1, variax_init_model + 1,
- sizeof(variax_init_model) - 1) == 0) {
- memcpy(variax->guitar,
- buf + sizeof(variax_init_model),
- sizeof(variax->guitar));
- } else if (memcmp(buf + 1, variax_init_version + 1,
- sizeof(variax_init_version) - 1) == 0) {
+ if (memcmp(buf + 1, variax_init_version + 1,
+ sizeof(variax_init_version) - 1) == 0) {
variax_startup3(variax);
} else if (memcmp(buf + 1, variax_init_done + 1,
sizeof(variax_init_done) - 1) == 0) {
/* notify of complete initialization: */
variax_startup4((unsigned long)variax);
}
-
break;
case LINE6_SYSEX_END:
break;
default:
- DEBUG_MESSAGES(dev_err
- (variax->line6.ifcdev,
- "Variax: unknown message %02X\n", buf[0]));
+ dev_dbg(variax->line6.ifcdev,
+ "Variax: unknown message %02X\n", buf[0]);
}
}
/*
- "read" request on "volume" special file.
-*/
-static ssize_t variax_get_volume(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct usb_line6_variax *variax =
- usb_get_intfdata(to_usb_interface(dev));
- return sprintf(buf, "%d\n", variax->volume);
-}
-
-/*
- "write" request on "volume" special file.
-*/
-static ssize_t variax_set_volume(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct usb_line6_variax *variax =
- usb_get_intfdata(to_usb_interface(dev));
- u8 value;
- int ret;
-
- ret = kstrtou8(buf, 10, &value);
- if (ret)
- return ret;
-
- if (line6_transmit_parameter(&variax->line6, VARIAXMIDI_volume,
- value) == 0)
- variax->volume = value;
-
- return count;
-}
-
-/*
- "read" request on "model" special file.
-*/
-static ssize_t variax_get_model(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct usb_line6_variax *variax =
- usb_get_intfdata(to_usb_interface(dev));
- return sprintf(buf, "%d\n", variax->model);
-}
-
-/*
- "write" request on "model" special file.
-*/
-static ssize_t variax_set_model(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct usb_line6_variax *variax =
- usb_get_intfdata(to_usb_interface(dev));
- u8 value;
- int ret;
-
- ret = kstrtou8(buf, 10, &value);
- if (ret)
- return ret;
-
- if (line6_send_program(&variax->line6, value) == 0)
- variax->model = value;
-
- return count;
-}
-
-/*
- "read" request on "active" special file.
-*/
-static ssize_t variax_get_active(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct usb_line6_variax *variax =
- usb_get_intfdata(to_usb_interface(dev));
- return sprintf(buf, "%d\n",
- variax->buffer_activate[VARIAX_OFFSET_ACTIVATE]);
-}
-
-/*
- "write" request on "active" special file.
-*/
-static ssize_t variax_set_active(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct usb_line6_variax *variax =
- usb_get_intfdata(to_usb_interface(dev));
- u8 value;
- int ret;
-
- ret = kstrtou8(buf, 10, &value);
- if (ret)
- return ret;
-
- variax_activate_async(variax, value ? 1 : 0);
- return count;
-}
-
-/*
- "read" request on "tone" special file.
-*/
-static ssize_t variax_get_tone(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct usb_line6_variax *variax =
- usb_get_intfdata(to_usb_interface(dev));
- return sprintf(buf, "%d\n", variax->tone);
-}
-
-/*
- "write" request on "tone" special file.
-*/
-static ssize_t variax_set_tone(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct usb_line6_variax *variax =
- usb_get_intfdata(to_usb_interface(dev));
- u8 value;
- int ret;
-
- ret = kstrtou8(buf, 10, &value);
- if (ret)
- return ret;
-
- if (line6_transmit_parameter(&variax->line6, VARIAXMIDI_tone,
- value) == 0)
- variax->tone = value;
-
- return count;
-}
-
-static ssize_t get_string(char *buf, const char *data, int length)
-{
- int i;
- memcpy(buf, data, length);
-
- for (i = length; i--;) {
- char c = buf[i];
-
- if ((c != 0) && (c != ' '))
- break;
- }
-
- buf[i + 1] = '\n';
- return i + 2;
-}
-
-/*
- "read" request on "name" special file.
-*/
-static ssize_t variax_get_name(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct usb_line6_variax *variax =
- usb_get_intfdata(to_usb_interface(dev));
- line6_dump_wait_interruptible(&variax->dumpreq);
- return get_string(buf, variax->model_data.name,
- sizeof(variax->model_data.name));
-}
-
-/*
- "read" request on "bank" special file.
-*/
-static ssize_t variax_get_bank(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct usb_line6_variax *variax =
- usb_get_intfdata(to_usb_interface(dev));
- line6_dump_wait_interruptible(&variax->dumpreq);
- return get_string(buf, variax->bank, sizeof(variax->bank));
-}
-
-/*
- "read" request on "dump" special file.
-*/
-static ssize_t variax_get_dump(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct usb_line6_variax *variax =
- usb_get_intfdata(to_usb_interface(dev));
- int retval;
- retval = line6_dump_wait_interruptible(&variax->dumpreq);
- if (retval < 0)
- return retval;
- memcpy(buf, &variax->model_data.control,
- sizeof(variax->model_data.control));
- return sizeof(variax->model_data.control);
-}
-
-/*
- "read" request on "guitar" special file.
-*/
-static ssize_t variax_get_guitar(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct usb_line6_variax *variax =
- usb_get_intfdata(to_usb_interface(dev));
- return sprintf(buf, "%s\n", variax->guitar);
-}
-
-#ifdef CONFIG_LINE6_USB_RAW
-
-static char *variax_alloc_sysex_buffer(struct usb_line6_variax *variax,
- int code, int size)
-{
- return line6_alloc_sysex_buffer(&variax->line6, VARIAX_SYSEX_CODE, code,
- size);
-}
-
-/*
- "write" request on "raw" special file.
-*/
-static ssize_t variax_set_raw2(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct usb_line6_variax *variax =
- usb_get_intfdata(to_usb_interface(dev));
- int size;
- int i;
- char *sysex;
-
- count -= count % 3;
- size = count * 2;
- sysex = variax_alloc_sysex_buffer(variax, VARIAX_SYSEX_PARAM, size);
-
- if (!sysex)
- return 0;
-
- for (i = 0; i < count; i += 3) {
- const unsigned char *p1 = buf + i;
- char *p2 = sysex + SYSEX_DATA_OFS + i * 2;
- p2[0] = p1[2] & 0x0f;
- p2[1] = p1[2] >> 4;
- p2[2] = p1[1] & 0x0f;
- p2[3] = p1[1] >> 4;
- p2[4] = p1[0] & 0x0f;
- p2[5] = p1[0] >> 4;
- }
-
- line6_send_sysex_message(&variax->line6, sysex, size);
- kfree(sysex);
- return count;
-}
-
-#endif
-
-/* Variax workbench special files: */
-static DEVICE_ATTR(model, S_IWUSR | S_IRUGO, variax_get_model,
- variax_set_model);
-static DEVICE_ATTR(volume, S_IWUSR | S_IRUGO, variax_get_volume,
- variax_set_volume);
-static DEVICE_ATTR(tone, S_IWUSR | S_IRUGO, variax_get_tone, variax_set_tone);
-static DEVICE_ATTR(name, S_IRUGO, variax_get_name, line6_nop_write);
-static DEVICE_ATTR(bank, S_IRUGO, variax_get_bank, line6_nop_write);
-static DEVICE_ATTR(dump, S_IRUGO, variax_get_dump, line6_nop_write);
-static DEVICE_ATTR(active, S_IWUSR | S_IRUGO, variax_get_active,
- variax_set_active);
-static DEVICE_ATTR(guitar, S_IRUGO, variax_get_guitar, line6_nop_write);
-
-#ifdef CONFIG_LINE6_USB_RAW
-static DEVICE_ATTR(raw, S_IWUSR, line6_nop_read, line6_set_raw);
-static DEVICE_ATTR(raw2, S_IWUSR, line6_nop_read, variax_set_raw2);
-#endif
-
-/*
Variax destructor.
*/
static void variax_destruct(struct usb_interface *interface)
@@ -581,36 +179,10 @@
del_timer(&variax->startup_timer2);
cancel_work_sync(&variax->startup_work);
- /* free dump request data: */
- line6_dumpreq_destructbuf(&variax->dumpreq, 2);
- line6_dumpreq_destructbuf(&variax->dumpreq, 1);
- line6_dumpreq_destruct(&variax->dumpreq);
-
kfree(variax->buffer_activate);
}
/*
- Create sysfs entries.
-*/
-static int variax_create_files2(struct device *dev)
-{
- int err;
- CHECK_RETURN(device_create_file(dev, &dev_attr_model));
- CHECK_RETURN(device_create_file(dev, &dev_attr_volume));
- CHECK_RETURN(device_create_file(dev, &dev_attr_tone));
- CHECK_RETURN(device_create_file(dev, &dev_attr_name));
- CHECK_RETURN(device_create_file(dev, &dev_attr_bank));
- CHECK_RETURN(device_create_file(dev, &dev_attr_dump));
- CHECK_RETURN(device_create_file(dev, &dev_attr_active));
- CHECK_RETURN(device_create_file(dev, &dev_attr_guitar));
-#ifdef CONFIG_LINE6_USB_RAW
- CHECK_RETURN(device_create_file(dev, &dev_attr_raw));
- CHECK_RETURN(device_create_file(dev, &dev_attr_raw2));
-#endif
- return 0;
-}
-
-/*
Try to init workbench device.
*/
static int variax_try_init(struct usb_interface *interface,
@@ -620,36 +192,12 @@
init_timer(&variax->startup_timer1);
init_timer(&variax->startup_timer2);
- INIT_WORK(&variax->startup_work, variax_startup7);
+ INIT_WORK(&variax->startup_work, variax_startup6);
if ((interface == NULL) || (variax == NULL))
return -ENODEV;
/* initialize USB buffers: */
- err = line6_dumpreq_init(&variax->dumpreq, variax_request_model1,
- sizeof(variax_request_model1));
-
- if (err < 0) {
- dev_err(&interface->dev, "Out of memory\n");
- return err;
- }
-
- err = line6_dumpreq_initbuf(&variax->dumpreq, variax_request_model2,
- sizeof(variax_request_model2), 1);
-
- if (err < 0) {
- dev_err(&interface->dev, "Out of memory\n");
- return err;
- }
-
- err = line6_dumpreq_initbuf(&variax->dumpreq, variax_request_bank,
- sizeof(variax_request_bank), 2);
-
- if (err < 0) {
- dev_err(&interface->dev, "Out of memory\n");
- return err;
- }
-
variax->buffer_activate = kmemdup(variax_activate,
sizeof(variax_activate), GFP_KERNEL);
@@ -692,28 +240,8 @@
*/
void line6_variax_disconnect(struct usb_interface *interface)
{
- struct device *dev;
-
if (interface == NULL)
return;
- dev = &interface->dev;
-
- if (dev != NULL) {
- /* remove sysfs entries: */
- line6_variax_remove_files(0, 0, dev);
- device_remove_file(dev, &dev_attr_model);
- device_remove_file(dev, &dev_attr_volume);
- device_remove_file(dev, &dev_attr_tone);
- device_remove_file(dev, &dev_attr_name);
- device_remove_file(dev, &dev_attr_bank);
- device_remove_file(dev, &dev_attr_dump);
- device_remove_file(dev, &dev_attr_active);
- device_remove_file(dev, &dev_attr_guitar);
-#ifdef CONFIG_LINE6_USB_RAW
- device_remove_file(dev, &dev_attr_raw);
- device_remove_file(dev, &dev_attr_raw2);
-#endif
- }
variax_destruct(interface);
}
diff --git a/drivers/staging/line6/variax.h b/drivers/staging/line6/variax.h
index e2999ab..24de796 100644
--- a/drivers/staging/line6/variax.h
+++ b/drivers/staging/line6/variax.h
@@ -18,7 +18,6 @@
#include <sound/core.h>
#include "driver.h"
-#include "dumprequest.h"
#define VARIAX_STARTUP_DELAY1 1000
#define VARIAX_STARTUP_DELAY3 100
@@ -32,33 +31,11 @@
VARIAX_STARTUP_VERSIONREQ,
VARIAX_STARTUP_WAIT,
VARIAX_STARTUP_ACTIVATE,
- VARIAX_STARTUP_DUMPREQ,
VARIAX_STARTUP_WORKQUEUE,
VARIAX_STARTUP_SETUP,
VARIAX_STARTUP_LAST = VARIAX_STARTUP_SETUP - 1
};
-enum {
- VARIAX_DUMP_PASS1 = LINE6_DUMP_CURRENT,
- VARIAX_DUMP_PASS2,
- VARIAX_DUMP_PASS3
-};
-
-/**
- Binary Variax model dump
-*/
-struct variax_model {
- /**
- Header information (including program name).
- */
- unsigned char name[18];
-
- /**
- Model parameters.
- */
- unsigned char control[78 * 2];
-};
-
struct usb_line6_variax {
/**
Generic Line6 USB data.
@@ -66,48 +43,11 @@
struct usb_line6 line6;
/**
- Dump request structure.
- Append two extra buffers for 3-pass data query.
- */
- struct line6_dump_request dumpreq;
- struct line6_dump_reqbuf extrabuf[2];
-
- /**
Buffer for activation code.
*/
unsigned char *buffer_activate;
/**
- Model number.
- */
- int model;
-
- /**
- Current model settings.
- */
- struct variax_model model_data;
-
- /**
- Name of connected guitar.
- */
- unsigned char guitar[18];
-
- /**
- Name of current model bank.
- */
- unsigned char bank[18];
-
- /**
- Position of volume dial.
- */
- int volume;
-
- /**
- Position of tone control dial.
- */
- int tone;
-
- /**
Handler for device initializaton.
*/
struct work_struct startup_work;
diff --git a/drivers/staging/media/dt3155v4l/dt3155v4l.c b/drivers/staging/media/dt3155v4l/dt3155v4l.c
index 2e7b711..2389103 100644
--- a/drivers/staging/media/dt3155v4l/dt3155v4l.c
+++ b/drivers/staging/media/dt3155v4l/dt3155v4l.c
@@ -718,7 +718,7 @@
*/
};
-static int __devinit
+static int
dt3155_init_board(struct pci_dev *pdev)
{
struct dt3155_priv *pd = pci_get_drvdata(pdev);
@@ -836,7 +836,7 @@
unsigned long *bitmap;
};
-static int __devinit
+static int
dt3155_alloc_coherent(struct device *dev, size_t size, int flags)
{
struct dma_coherent_mem *mem;
@@ -877,7 +877,7 @@
return 0;
}
-static void __devexit
+static void
dt3155_free_coherent(struct device *dev)
{
struct dma_coherent_mem *mem = dev->dma_mem;
@@ -891,7 +891,7 @@
kfree(mem);
}
-static int __devinit
+static int
dt3155_probe(struct pci_dev *pdev, const struct pci_device_id *id)
{
int err;
@@ -956,7 +956,7 @@
return err;
}
-static void __devexit
+static void
dt3155_remove(struct pci_dev *pdev)
{
struct dt3155_priv *pd = pci_get_drvdata(pdev);
@@ -983,7 +983,7 @@
.name = DT3155_NAME,
.id_table = pci_ids,
.probe = dt3155_probe,
- .remove = __devexit_p(dt3155_remove),
+ .remove = dt3155_remove,
};
module_pci_driver(pci_driver);
diff --git a/drivers/staging/media/lirc/lirc_parallel.c b/drivers/staging/media/lirc/lirc_parallel.c
index dd2bca7..ec14bc8 100644
--- a/drivers/staging/media/lirc/lirc_parallel.c
+++ b/drivers/staging/media/lirc/lirc_parallel.c
@@ -583,12 +583,12 @@
static struct platform_device *lirc_parallel_dev;
-static int __devinit lirc_parallel_probe(struct platform_device *dev)
+static int lirc_parallel_probe(struct platform_device *dev)
{
return 0;
}
-static int __devexit lirc_parallel_remove(struct platform_device *dev)
+static int lirc_parallel_remove(struct platform_device *dev)
{
return 0;
}
@@ -606,7 +606,7 @@
static struct platform_driver lirc_parallel_driver = {
.probe = lirc_parallel_probe,
- .remove = __devexit_p(lirc_parallel_remove),
+ .remove = lirc_parallel_remove,
.suspend = lirc_parallel_suspend,
.resume = lirc_parallel_resume,
.driver = {
diff --git a/drivers/staging/media/lirc/lirc_serial.c b/drivers/staging/media/lirc/lirc_serial.c
index 97ef670..71e3bf2 100644
--- a/drivers/staging/media/lirc/lirc_serial.c
+++ b/drivers/staging/media/lirc/lirc_serial.c
@@ -841,7 +841,7 @@
return 0;
}
-static int __devinit lirc_serial_probe(struct platform_device *dev)
+static int lirc_serial_probe(struct platform_device *dev)
{
int i, nlow, nhigh, result;
@@ -927,7 +927,7 @@
return result;
}
-static int __devexit lirc_serial_remove(struct platform_device *dev)
+static int lirc_serial_remove(struct platform_device *dev)
{
free_irq(irq, (void *)&hardware);
@@ -1148,7 +1148,7 @@
static struct platform_driver lirc_serial_driver = {
.probe = lirc_serial_probe,
- .remove = __devexit_p(lirc_serial_remove),
+ .remove = lirc_serial_remove,
.suspend = lirc_serial_suspend,
.resume = lirc_serial_resume,
.driver = {
diff --git a/drivers/staging/media/lirc/lirc_sir.c b/drivers/staging/media/lirc/lirc_sir.c
index 4afc3b4..a457998 100644
--- a/drivers/staging/media/lirc/lirc_sir.c
+++ b/drivers/staging/media/lirc/lirc_sir.c
@@ -1218,19 +1218,19 @@
return 0;
}
-static int __devinit lirc_sir_probe(struct platform_device *dev)
+static int lirc_sir_probe(struct platform_device *dev)
{
return 0;
}
-static int __devexit lirc_sir_remove(struct platform_device *dev)
+static int lirc_sir_remove(struct platform_device *dev)
{
return 0;
}
static struct platform_driver lirc_sir_driver = {
.probe = lirc_sir_probe,
- .remove = __devexit_p(lirc_sir_remove),
+ .remove = lirc_sir_remove,
.driver = {
.name = "lirc_sir",
.owner = THIS_MODULE,
diff --git a/drivers/staging/media/solo6x10/core.c b/drivers/staging/media/solo6x10/core.c
index 3ee9b12..fd83d6d 100644
--- a/drivers/staging/media/solo6x10/core.c
+++ b/drivers/staging/media/solo6x10/core.c
@@ -129,7 +129,7 @@
kfree(solo_dev);
}
-static int __devinit solo_pci_probe(struct pci_dev *pdev,
+static int solo_pci_probe(struct pci_dev *pdev,
const struct pci_device_id *id)
{
struct solo_dev *solo_dev;
@@ -284,7 +284,7 @@
return ret;
}
-static void __devexit solo_pci_remove(struct pci_dev *pdev)
+static void solo_pci_remove(struct pci_dev *pdev)
{
struct solo_dev *solo_dev = pci_get_drvdata(pdev);
diff --git a/drivers/staging/net/pc300_drv.c b/drivers/staging/net/pc300_drv.c
index cb0f8d9..7281797 100644
--- a/drivers/staging/net/pc300_drv.c
+++ b/drivers/staging/net/pc300_drv.c
@@ -3409,7 +3409,7 @@
board_nbr++;
}
-static int __devinit
+static int
cpc_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
{
int err, eeprom_outdated = 0;
@@ -3607,7 +3607,7 @@
return err;
}
-static void __devexit cpc_remove_one(struct pci_dev *pdev)
+static void cpc_remove_one(struct pci_dev *pdev)
{
pc300_t *card = pci_get_drvdata(pdev);
@@ -3646,7 +3646,7 @@
.name = "pc300",
.id_table = cpc_pci_dev_id,
.probe = cpc_init_one,
- .remove = __devexit_p(cpc_remove_one),
+ .remove = cpc_remove_one,
};
static int __init cpc_init(void)
diff --git a/drivers/staging/nvec/Kconfig b/drivers/staging/nvec/Kconfig
index 1235a789..f779fdc 100644
--- a/drivers/staging/nvec/Kconfig
+++ b/drivers/staging/nvec/Kconfig
@@ -1,6 +1,7 @@
config MFD_NVEC
bool "NV Tegra Embedded Controller SMBus Interface"
depends on I2C && GPIOLIB && ARCH_TEGRA
+ select MFD_CORE
help
Say Y here to enable support for a nVidia compliant embedded
controller.
diff --git a/drivers/staging/nvec/nvec.c b/drivers/staging/nvec/nvec.c
index 094fdc3..c59b7b2 100644
--- a/drivers/staging/nvec/nvec.c
+++ b/drivers/staging/nvec/nvec.c
@@ -716,7 +716,7 @@
nvec_write_async(nvec_power_handle, "\x04\x01", 2);
}
-static int __devinit tegra_nvec_probe(struct platform_device *pdev)
+static int tegra_nvec_probe(struct platform_device *pdev)
{
int err, ret;
struct clk *i2c_clk;
@@ -853,7 +853,7 @@
return 0;
}
-static int __devexit tegra_nvec_remove(struct platform_device *pdev)
+static int tegra_nvec_remove(struct platform_device *pdev)
{
struct nvec_chip *nvec = platform_get_drvdata(pdev);
@@ -901,7 +901,7 @@
static const SIMPLE_DEV_PM_OPS(nvec_pm_ops, nvec_suspend, nvec_resume);
/* Match table for of_platform binding */
-static const struct of_device_id nvidia_nvec_of_match[] __devinitconst = {
+static const struct of_device_id nvidia_nvec_of_match[] = {
{ .compatible = "nvidia,nvec", },
{},
};
@@ -909,7 +909,7 @@
static struct platform_driver nvec_device_driver = {
.probe = tegra_nvec_probe,
- .remove = __devexit_p(tegra_nvec_remove),
+ .remove = tegra_nvec_remove,
.driver = {
.name = "nvec",
.owner = THIS_MODULE,
diff --git a/drivers/staging/nvec/nvec_kbd.c b/drivers/staging/nvec/nvec_kbd.c
index 6cc30dc..7cb149b 100644
--- a/drivers/staging/nvec/nvec_kbd.c
+++ b/drivers/staging/nvec/nvec_kbd.c
@@ -100,7 +100,7 @@
return 0;
}
-static int __devinit nvec_kbd_probe(struct platform_device *pdev)
+static int nvec_kbd_probe(struct platform_device *pdev)
{
struct nvec_chip *nvec = dev_get_drvdata(pdev->dev.parent);
int i, j, err;
@@ -159,7 +159,7 @@
return err;
}
-static int __devexit nvec_kbd_remove(struct platform_device *pdev)
+static int nvec_kbd_remove(struct platform_device *pdev)
{
input_unregister_device(keys_dev.input);
input_free_device(keys_dev.input);
@@ -169,7 +169,7 @@
static struct platform_driver nvec_kbd_driver = {
.probe = nvec_kbd_probe,
- .remove = __devexit_p(nvec_kbd_remove),
+ .remove = nvec_kbd_remove,
.driver = {
.name = "nvec-kbd",
.owner = THIS_MODULE,
diff --git a/drivers/staging/nvec/nvec_paz00.c b/drivers/staging/nvec/nvec_paz00.c
index b747e39..934b796 100644
--- a/drivers/staging/nvec/nvec_paz00.c
+++ b/drivers/staging/nvec/nvec_paz00.c
@@ -43,7 +43,7 @@
}
-static int __devinit nvec_paz00_probe(struct platform_device *pdev)
+static int nvec_paz00_probe(struct platform_device *pdev)
{
struct nvec_chip *nvec = dev_get_drvdata(pdev->dev.parent);
struct nvec_led *led;
@@ -72,7 +72,7 @@
return 0;
}
-static int __devexit nvec_paz00_remove(struct platform_device *pdev)
+static int nvec_paz00_remove(struct platform_device *pdev)
{
struct nvec_led *led = platform_get_drvdata(pdev);
@@ -83,7 +83,7 @@
static struct platform_driver nvec_paz00_driver = {
.probe = nvec_paz00_probe,
- .remove = __devexit_p(nvec_paz00_remove),
+ .remove = nvec_paz00_remove,
.driver = {
.name = "nvec-paz00",
.owner = THIS_MODULE,
diff --git a/drivers/staging/nvec/nvec_power.c b/drivers/staging/nvec/nvec_power.c
index cc8ccd7..b7b6d54 100644
--- a/drivers/staging/nvec/nvec_power.c
+++ b/drivers/staging/nvec/nvec_power.c
@@ -368,7 +368,7 @@
schedule_delayed_work(to_delayed_work(work), msecs_to_jiffies(5000));
};
-static int __devinit nvec_power_probe(struct platform_device *pdev)
+static int nvec_power_probe(struct platform_device *pdev)
{
struct power_supply *psy;
struct nvec_power *power;
@@ -407,7 +407,7 @@
return power_supply_register(&pdev->dev, psy);
}
-static int __devexit nvec_power_remove(struct platform_device *pdev)
+static int nvec_power_remove(struct platform_device *pdev)
{
struct nvec_power *power = platform_get_drvdata(pdev);
@@ -425,7 +425,7 @@
static struct platform_driver nvec_power_driver = {
.probe = nvec_power_probe,
- .remove = __devexit_p(nvec_power_remove),
+ .remove = nvec_power_remove,
.driver = {
.name = "nvec-power",
.owner = THIS_MODULE,
diff --git a/drivers/staging/nvec/nvec_ps2.c b/drivers/staging/nvec/nvec_ps2.c
index d7c6511..88dd288 100644
--- a/drivers/staging/nvec/nvec_ps2.c
+++ b/drivers/staging/nvec/nvec_ps2.c
@@ -93,7 +93,7 @@
return NOTIFY_DONE;
}
-static int __devinit nvec_mouse_probe(struct platform_device *pdev)
+static int nvec_mouse_probe(struct platform_device *pdev)
{
struct nvec_chip *nvec = dev_get_drvdata(pdev->dev.parent);
struct serio *ser_dev;
@@ -123,7 +123,7 @@
return 0;
}
-static int __devexit nvec_mouse_remove(struct platform_device *pdev)
+static int nvec_mouse_remove(struct platform_device *pdev)
{
serio_unregister_port(ps2_dev.ser_dev);
@@ -164,7 +164,7 @@
static struct platform_driver nvec_mouse_driver = {
.probe = nvec_mouse_probe,
- .remove = __devexit_p(nvec_mouse_remove),
+ .remove = nvec_mouse_remove,
.driver = {
.name = "nvec-mouse",
.owner = THIS_MODULE,
diff --git a/drivers/staging/octeon/ethernet.c b/drivers/staging/octeon/ethernet.c
index 683bedc..ef32dc1 100644
--- a/drivers/staging/octeon/ethernet.c
+++ b/drivers/staging/octeon/ethernet.c
@@ -169,7 +169,7 @@
queue_delayed_work(cvm_oct_poll_queue, &priv->port_periodic_work, HZ);
}
-static __devinit void cvm_oct_configure_common_hw(void)
+static void cvm_oct_configure_common_hw(void)
{
/* Setup the FPA */
cvmx_fpa_enable();
@@ -586,7 +586,7 @@
extern void octeon_mdiobus_force_mod_depencency(void);
-static struct device_node * __devinit cvm_oct_of_get_child(const struct device_node *parent,
+static struct device_node *cvm_oct_of_get_child(const struct device_node *parent,
int reg_val)
{
struct device_node *node = NULL;
@@ -604,7 +604,7 @@
return node;
}
-static struct device_node * __devinit cvm_oct_node_for_port(struct device_node *pip,
+static struct device_node *cvm_oct_node_for_port(struct device_node *pip,
int interface, int port)
{
struct device_node *ni, *np;
@@ -619,7 +619,7 @@
return np;
}
-static int __devinit cvm_oct_probe(struct platform_device *pdev)
+static int cvm_oct_probe(struct platform_device *pdev)
{
int num_interfaces;
int interface;
@@ -813,7 +813,7 @@
return 0;
}
-static int __devexit cvm_oct_remove(struct platform_device *pdev)
+static int cvm_oct_remove(struct platform_device *pdev)
{
int port;
@@ -874,7 +874,7 @@
static struct platform_driver cvm_oct_driver = {
.probe = cvm_oct_probe,
- .remove = __devexit_p(cvm_oct_remove),
+ .remove = cvm_oct_remove,
.driver = {
.owner = THIS_MODULE,
.name = KBUILD_MODNAME,
diff --git a/drivers/staging/olpc_dcon/olpc_dcon.c b/drivers/staging/olpc_dcon/olpc_dcon.c
index d49c32a..54ed6f6 100644
--- a/drivers/staging/olpc_dcon/olpc_dcon.c
+++ b/drivers/staging/olpc_dcon/olpc_dcon.c
@@ -39,10 +39,6 @@
static ushort resumeline = 898;
module_param(resumeline, ushort, 0444);
-/* Default off since it doesn't work on DCON ASIC in B-test OLPC board */
-static int useaa = 1;
-module_param(useaa, int, 0444);
-
static struct dcon_platform_data *pdata;
/* I2C structures */
@@ -50,8 +46,6 @@
/* Platform devices */
static struct platform_device *dcon_device;
-static DECLARE_WAIT_QUEUE_HEAD(dcon_wait_queue);
-
static unsigned short normal_i2c[] = { 0x0d, I2C_CLIENT_END };
static s32 dcon_write(struct dcon_priv *dcon, u8 reg, u16 val)
@@ -103,9 +97,7 @@
/* Colour swizzle, AA, no passthrough, backlight */
if (is_init) {
dcon->disp_mode = MODE_PASSTHRU | MODE_BL_ENABLE |
- MODE_CSWIZZLE;
- if (useaa)
- dcon->disp_mode |= MODE_COL_AA;
+ MODE_CSWIZZLE | MODE_COL_AA;
}
dcon_write(dcon, DCON_REG_MODE, dcon->disp_mode);
@@ -191,9 +183,7 @@
dcon->disp_mode |= MODE_MONO_LUMA;
} else {
dcon->disp_mode &= ~(MODE_MONO_LUMA);
- dcon->disp_mode |= MODE_CSWIZZLE;
- if (useaa)
- dcon->disp_mode |= MODE_COL_AA;
+ dcon->disp_mode |= MODE_CSWIZZLE | MODE_COL_AA;
}
dcon_write(dcon, DCON_REG_MODE, dcon->disp_mode);
@@ -288,7 +278,6 @@
{
struct dcon_priv *dcon = container_of(work, struct dcon_priv,
switch_source);
- DECLARE_WAITQUEUE(wait, current);
int source = dcon->pending_src;
if (dcon->curr_src == source)
@@ -305,11 +294,9 @@
if (dcon_write(dcon, DCON_REG_MODE,
dcon->disp_mode | MODE_SCAN_INT))
pr_err("couldn't enable scanline interrupt!\n");
- else {
+ else
/* Wait up to one second for the scanline interrupt */
- wait_event_timeout(dcon_wait_queue,
- dcon->switched == true, HZ);
- }
+ wait_event_timeout(dcon->waitq, dcon->switched, HZ);
if (!dcon->switched)
pr_err("Timeout entering CPU mode; expect a screen glitch.\n");
@@ -340,21 +327,15 @@
break;
case DCON_SOURCE_DCON:
{
- int t;
struct timespec delta_t;
pr_info("dcon_source_switch to DCON\n");
- add_wait_queue(&dcon_wait_queue, &wait);
- set_current_state(TASK_UNINTERRUPTIBLE);
-
/* Clear DCONLOAD - this implies that the DCON is in control */
pdata->set_dconload(0);
getnstimeofday(&dcon->load_time);
- t = schedule_timeout(HZ/2);
- remove_wait_queue(&dcon_wait_queue, &wait);
- set_current_state(TASK_RUNNING);
+ wait_event_timeout(dcon->waitq, dcon->switched, HZ/2);
if (!dcon->switched) {
pr_err("Timeout entering DCON mode; expect a screen glitch.\n");
@@ -539,6 +520,10 @@
if (level != dcon->bl_val)
dcon_set_backlight(dcon, level);
+ /* power down the DCON when the screen is blanked */
+ if (!dcon->ignore_fb_events)
+ dcon_sleep(dcon, !!(dev->props.state & BL_CORE_FBBLANK));
+
return 0;
}
@@ -584,24 +569,6 @@
.notifier_call = unfreeze_on_panic,
};
-/*
- * When the framebuffer sleeps due to external sources (e.g. user idle), power
- * down the DCON as well. Power it back up when the fb comes back to life.
- */
-static int dcon_fb_notifier(struct notifier_block *self,
- unsigned long event, void *data)
-{
- struct fb_event *evdata = data;
- struct dcon_priv *dcon = container_of(self, struct dcon_priv,
- fbevent_nb);
- int *blank = (int *)evdata->data;
- if (((event != FB_EVENT_BLANK) && (event != FB_EVENT_CONBLANK)) ||
- dcon->ignore_fb_events)
- return 0;
- dcon_sleep(dcon, *blank ? true : false);
- return 0;
-}
-
static int dcon_detect(struct i2c_client *client, struct i2c_board_info *info)
{
strlcpy(info->type, "olpc_dcon", I2C_NAME_SIZE);
@@ -622,10 +589,10 @@
return -ENOMEM;
dcon->client = client;
+ init_waitqueue_head(&dcon->waitq);
INIT_WORK(&dcon->switch_source, dcon_source_switch);
dcon->reboot_nb.notifier_call = dcon_reboot_notify;
dcon->reboot_nb.priority = -1;
- dcon->fbevent_nb.notifier_call = dcon_fb_notifier;
i2c_set_clientdata(client, dcon);
@@ -680,7 +647,6 @@
register_reboot_notifier(&dcon->reboot_nb);
atomic_notifier_chain_register(&panic_notifier_list, &dcon_panic_nb);
- fb_register_client(&dcon->fbevent_nb);
return 0;
@@ -701,7 +667,6 @@
{
struct dcon_priv *dcon = i2c_get_clientdata(client);
- fb_unregister_client(&dcon->fbevent_nb);
unregister_reboot_notifier(&dcon->reboot_nb);
atomic_notifier_chain_unregister(&panic_notifier_list, &dcon_panic_nb);
@@ -720,8 +685,9 @@
}
#ifdef CONFIG_PM
-static int dcon_suspend(struct i2c_client *client, pm_message_t state)
+static int dcon_suspend(struct device *dev)
{
+ struct i2c_client *client = to_i2c_client(dev);
struct dcon_priv *dcon = i2c_get_clientdata(client);
if (!dcon->asleep) {
@@ -732,8 +698,9 @@
return 0;
}
-static int dcon_resume(struct i2c_client *client)
+static int dcon_resume(struct device *dev)
{
+ struct i2c_client *client = to_i2c_client(dev);
struct dcon_priv *dcon = i2c_get_clientdata(client);
if (!dcon->asleep) {
@@ -744,7 +711,12 @@
return 0;
}
-#endif
+#else
+
+#define dcon_suspend NULL
+#define dcon_resume NULL
+
+#endif /* CONFIG_PM */
irqreturn_t dcon_interrupt(int irq, void *id)
@@ -764,7 +736,7 @@
case 1: /* switch to CPU mode */
dcon->switched = true;
getnstimeofday(&dcon->irq_time);
- wake_up(&dcon_wait_queue);
+ wake_up(&dcon->waitq);
break;
case 0:
@@ -778,7 +750,7 @@
if (dcon->curr_src != dcon->pending_src && !dcon->switched) {
dcon->switched = true;
getnstimeofday(&dcon->irq_time);
- wake_up(&dcon_wait_queue);
+ wake_up(&dcon->waitq);
pr_debug("switching w/ status 0/0\n");
} else {
pr_debug("scanline interrupt w/CPU\n");
@@ -788,27 +760,28 @@
return IRQ_HANDLED;
}
+static const struct dev_pm_ops dcon_pm_ops = {
+ .suspend = dcon_suspend,
+ .resume = dcon_resume,
+};
+
static const struct i2c_device_id dcon_idtable[] = {
{ "olpc_dcon", 0 },
{ }
};
-
MODULE_DEVICE_TABLE(i2c, dcon_idtable);
struct i2c_driver dcon_driver = {
.driver = {
.name = "olpc_dcon",
+ .pm = &dcon_pm_ops,
},
.class = I2C_CLASS_DDC | I2C_CLASS_HWMON,
.id_table = dcon_idtable,
.probe = dcon_probe,
- .remove = __devexit_p(dcon_remove),
+ .remove = dcon_remove,
.detect = dcon_detect,
.address_list = normal_i2c,
-#ifdef CONFIG_PM
- .suspend = dcon_suspend,
- .resume = dcon_resume,
-#endif
};
static int __init olpc_dcon_init(void)
diff --git a/drivers/staging/olpc_dcon/olpc_dcon.h b/drivers/staging/olpc_dcon/olpc_dcon.h
index 167a417..997bded 100644
--- a/drivers/staging/olpc_dcon/olpc_dcon.h
+++ b/drivers/staging/olpc_dcon/olpc_dcon.h
@@ -52,9 +52,9 @@
struct fb_info *fbinfo;
struct backlight_device *bl_dev;
+ wait_queue_head_t waitq;
struct work_struct switch_source;
struct notifier_block reboot_nb;
- struct notifier_block fbevent_nb;
/* Shadow register for the DCON_REG_MODE register */
u8 disp_mode;
diff --git a/drivers/staging/olpc_dcon/olpc_dcon_xo_1_5.c b/drivers/staging/olpc_dcon/olpc_dcon_xo_1_5.c
index 352dd3d..6a4d379 100644
--- a/drivers/staging/olpc_dcon/olpc_dcon_xo_1_5.c
+++ b/drivers/staging/olpc_dcon/olpc_dcon_xo_1_5.c
@@ -10,7 +10,6 @@
#include <linux/acpi.h>
#include <linux/delay.h>
-#include <linux/pci.h>
#include <linux/gpio.h>
#include <asm/olpc.h>
@@ -62,33 +61,6 @@
static int dcon_init_xo_1_5(struct dcon_priv *dcon)
{
unsigned int irq;
- u_int8_t tmp;
- struct pci_dev *pdev;
-
- pdev = pci_get_device(PCI_VENDOR_ID_VIA,
- PCI_DEVICE_ID_VIA_VX855, NULL);
- if (!pdev) {
- pr_err("cannot find VX855 PCI ID\n");
- return 1;
- }
-
- pci_read_config_byte(pdev, 0x95, &tmp);
- pci_write_config_byte(pdev, 0x95, tmp|0x0c);
-
- /* Set GPIO8 to GPIO mode, not SSPICLK */
- pci_read_config_byte(pdev, 0xe3, &tmp);
- pci_write_config_byte(pdev, 0xe3, tmp | 0x04);
-
- /* Set GPI10/GPI11 to GPI mode, not SSPISDI/SSPISS */
- pci_read_config_byte(pdev, 0xe4, &tmp);
- pci_write_config_byte(pdev, 0xe4, tmp|0x08);
-
- /* clear PMU_RxE1[6] to select SCI on GPIO12 */
- /* clear PMU_RxE0[6] to choose falling edge */
- pci_read_config_byte(pdev, 0xe1, &tmp);
- pci_write_config_byte(pdev, 0xe1, tmp & ~BIT_GPIO12);
- pci_read_config_byte(pdev, 0xe0, &tmp);
- pci_write_config_byte(pdev, 0xe0, tmp & ~BIT_GPIO12);
dcon_clear_irq();
@@ -101,8 +73,6 @@
DCON_SOURCE_CPU : DCON_SOURCE_DCON;
dcon->pending_src = dcon->curr_src;
- pci_dev_put(pdev);
-
/* we're sharing the IRQ with ACPI */
irq = acpi_gbl_FADT.sci_interrupt;
if (request_irq(irq, &dcon_interrupt, IRQF_SHARED, "DCON", dcon)) {
diff --git a/drivers/staging/omap-thermal/omap-bandgap.c b/drivers/staging/omap-thermal/omap-bandgap.c
index 368a2e1..8346e345 100644
--- a/drivers/staging/omap-thermal/omap-bandgap.c
+++ b/drivers/staging/omap-thermal/omap-bandgap.c
@@ -38,6 +38,7 @@
#include <linux/of_device.h>
#include <linux/of_platform.h>
#include <linux/of_irq.h>
+#include <linux/io.h>
#include "omap-bandgap.h"
@@ -112,6 +113,11 @@
omap_bandgap_writel(bg_ptr, ctrl, tsr->bgap_mask_ctrl);
+ dev_dbg(bg_ptr->dev,
+ "%s: IRQ from %s sensor: hotevent %d coldevent %d\n",
+ __func__, bg_ptr->conf->sensors[i].domain,
+ t_hot, t_cold);
+
/* read temperature */
temp = omap_bandgap_readl(bg_ptr, tsr->temp_sensor_ctrl);
temp &= tsr->bgap_dtemp_mask;
@@ -843,7 +849,7 @@
}
static
-int __devinit omap_bandgap_probe(struct platform_device *pdev)
+int omap_bandgap_probe(struct platform_device *pdev)
{
struct omap_bandgap *bg_ptr;
int clk_rate, ret = 0, i;
@@ -992,7 +998,7 @@
}
static
-int __devexit omap_bandgap_remove(struct platform_device *pdev)
+int omap_bandgap_remove(struct platform_device *pdev)
{
struct omap_bandgap *bg_ptr = platform_get_drvdata(pdev);
int i;
@@ -1059,7 +1065,6 @@
static int omap_bandgap_restore_ctxt(struct omap_bandgap *bg_ptr)
{
int i;
- u32 temp = 0;
for (i = 0; i < bg_ptr->conf->sensor_count; i++) {
struct temp_sensor_registers *tsr;
@@ -1072,41 +1077,27 @@
if (OMAP_BANDGAP_HAS(bg_ptr, COUNTER))
val = omap_bandgap_readl(bg_ptr, tsr->bgap_counter);
- if (val == 0) {
- if (OMAP_BANDGAP_HAS(bg_ptr, TSHUT_CONFIG))
- omap_bandgap_writel(bg_ptr,
- rval->tshut_threshold,
- tsr->tshut_threshold);
- /* Force immediate temperature measurement and update
- * of the DTEMP field
- */
- omap_bandgap_force_single_read(bg_ptr, i);
+ if (OMAP_BANDGAP_HAS(bg_ptr, TSHUT_CONFIG))
+ omap_bandgap_writel(bg_ptr,
+ rval->tshut_threshold,
+ tsr->tshut_threshold);
+ /* Force immediate temperature measurement and update
+ * of the DTEMP field
+ */
+ omap_bandgap_force_single_read(bg_ptr, i);
- if (OMAP_BANDGAP_HAS(bg_ptr, COUNTER))
- omap_bandgap_writel(bg_ptr, rval->bg_counter,
- tsr->bgap_counter);
- if (OMAP_BANDGAP_HAS(bg_ptr, MODE_CONFIG))
- omap_bandgap_writel(bg_ptr, rval->bg_mode_ctrl,
- tsr->bgap_mode_ctrl);
- if (OMAP_BANDGAP_HAS(bg_ptr, TALERT)) {
- omap_bandgap_writel(bg_ptr,
- rval->bg_threshold,
- tsr->bgap_threshold);
- omap_bandgap_writel(bg_ptr, rval->bg_ctrl,
- tsr->bgap_mask_ctrl);
- }
- } else {
- temp = omap_bandgap_readl(bg_ptr,
- tsr->temp_sensor_ctrl);
- temp &= (tsr->bgap_dtemp_mask);
- omap_bandgap_force_single_read(bg_ptr, i);
- if (temp == 0 && OMAP_BANDGAP_HAS(bg_ptr, TALERT)) {
- temp = omap_bandgap_readl(bg_ptr,
- tsr->bgap_mask_ctrl);
- temp |= 1 << __ffs(tsr->mode_ctrl_mask);
- omap_bandgap_writel(bg_ptr, temp,
- tsr->bgap_mask_ctrl);
- }
+ if (OMAP_BANDGAP_HAS(bg_ptr, COUNTER))
+ omap_bandgap_writel(bg_ptr, rval->bg_counter,
+ tsr->bgap_counter);
+ if (OMAP_BANDGAP_HAS(bg_ptr, MODE_CONFIG))
+ omap_bandgap_writel(bg_ptr, rval->bg_mode_ctrl,
+ tsr->bgap_mode_ctrl);
+ if (OMAP_BANDGAP_HAS(bg_ptr, TALERT)) {
+ omap_bandgap_writel(bg_ptr,
+ rval->bg_threshold,
+ tsr->bgap_threshold);
+ omap_bandgap_writel(bg_ptr, rval->bg_ctrl,
+ tsr->bgap_mask_ctrl);
}
}
diff --git a/drivers/staging/omap-thermal/omap-bandgap.h b/drivers/staging/omap-thermal/omap-bandgap.h
index 78aed75..2bb14bd 100644
--- a/drivers/staging/omap-thermal/omap-bandgap.h
+++ b/drivers/staging/omap-thermal/omap-bandgap.h
@@ -336,14 +336,6 @@
};
/**
- * struct thermal_cooling_conf - description on how to cool a thermal zone
- * @freq_clip_count: size of freq_data
- */
-struct thermal_cooling_conf {
- int freq_clip_count;
-};
-
-/**
* struct omap_temp_sensor - bandgap temperature sensor platform data
* @ts_data: pointer to struct with thresholds, limits of temperature sensor
* @registers: pointer to the list of register offsets and bitfields
@@ -365,7 +357,6 @@
struct temp_sensor_registers *registers;
struct temp_sensor_regval regval;
char *domain;
- struct thermal_cooling_conf cooling_data;
/* for hotspot extrapolation */
const int slope;
const int constant;
diff --git a/drivers/staging/omap-thermal/omap-thermal-common.c b/drivers/staging/omap-thermal/omap-thermal-common.c
index 5c0c203b..15e9723 100644
--- a/drivers/staging/omap-thermal/omap-thermal-common.c
+++ b/drivers/staging/omap-thermal/omap-thermal-common.c
@@ -29,6 +29,7 @@
#include <linux/workqueue.h>
#include <linux/thermal.h>
#include <linux/cpufreq.h>
+#include <linux/cpumask.h>
#include <linux/cpu_cooling.h>
#include "omap-thermal.h"
@@ -112,7 +113,7 @@
struct thermal_cooling_device *cdev)
{
struct omap_thermal_data *data = thermal->devdata;
- int max, id;
+ int id;
if (IS_ERR_OR_NULL(data))
return -ENODEV;
@@ -122,7 +123,6 @@
return 0;
id = data->sensor_id;
- max = data->bg_ptr->conf->sensors[id].cooling_data.freq_clip_count;
/* TODO: bind with min and max states */
/* Simple thing, two trips, one passive another critical */
@@ -256,12 +256,12 @@
int omap_thermal_expose_sensor(struct omap_bandgap *bg_ptr, int id,
char *domain)
{
- struct omap_thermal_pdata pdata;
+ struct omap_thermal_data *data;
data = omap_bandgap_get_sensor_data(bg_ptr, id);
if (!data)
- data = omap_thermal_build_pdata(bg_ptr, id);
+ data = omap_thermal_build_data(bg_ptr, id);
if (!data)
return -EINVAL;
@@ -304,81 +304,24 @@
return 0;
}
-static int omap_thermal_build_cpufreq_clip(struct omap_bandgap *bg_ptr,
- struct freq_clip_table **tab_ptr,
- int *tab_size)
-{
- struct cpufreq_frequency_table *freq_table;
- struct freq_clip_table *tab;
- int i, count = 0;
-
- freq_table = cpufreq_frequency_get_table(0);
- if (IS_ERR_OR_NULL(freq_table)) {
- dev_err(bg_ptr->dev,
- "%s: failed to get cpufreq table (%p)\n",
- __func__, freq_table);
- return -EINVAL;
- }
-
- for (i = 0; freq_table[i].frequency != CPUFREQ_TABLE_END; i++) {
- unsigned int freq = freq_table[i].frequency;
- if (freq == CPUFREQ_ENTRY_INVALID)
- continue;
- count++;
- }
-
- tab = devm_kzalloc(bg_ptr->dev, sizeof(*tab) * count, GFP_KERNEL);
- if (!tab) {
- dev_err(bg_ptr->dev,
- "%s: no memory available\n", __func__);
- return -ENOMEM;
- }
-
- for (i = 0; freq_table[i].frequency != CPUFREQ_TABLE_END; i++) {
- unsigned int freq = freq_table[i].frequency;
-
- if (freq == CPUFREQ_ENTRY_INVALID)
- continue;
-
- tab[count - i - 1].freq_clip_max = freq;
- tab[count - i - 1].temp_level = OMAP_TRIP_HOT;
- tab[count - i - 1].mask_val = cpumask_of(0);
- }
-
- *tab_ptr = tab;
- *tab_size = count;
-
- return 0;
-}
-
int omap_thermal_register_cpu_cooling(struct omap_bandgap *bg_ptr, int id)
{
struct omap_thermal_data *data;
- struct freq_clip_table *tab_ptr;
- int tab_size, ret;
data = omap_bandgap_get_sensor_data(bg_ptr, id);
if (!data)
- data = omap_thermal_build_pdata(bg_ptr, id);
+ data = omap_thermal_build_data(bg_ptr, id);
if (!data)
return -EINVAL;
- ret = omap_thermal_build_cpufreq_clip(bg_ptr, &tab_ptr, &tab_size);
- if (ret < 0) {
- dev_err(bg_ptr->dev,
- "%s: failed to build cpufreq clip table\n", __func__);
- return ret;
- }
-
/* Register cooling device */
- data->cool_dev = cpufreq_cooling_register(tab_ptr, tab_size);
+ data->cool_dev = cpufreq_cooling_register(cpu_present_mask);
if (IS_ERR_OR_NULL(data->cool_dev)) {
dev_err(bg_ptr->dev,
"Failed to register cpufreq cooling device\n");
return PTR_ERR(data->cool_dev);
}
- bg_ptr->conf->sensors[id].cooling_data.freq_clip_count = tab_size;
omap_bandgap_set_sensor_data(bg_ptr, id, data);
return 0;
diff --git a/drivers/staging/omapdrm/Kconfig b/drivers/staging/omapdrm/Kconfig
index 81a7cba..b724a41 100644
--- a/drivers/staging/omapdrm/Kconfig
+++ b/drivers/staging/omapdrm/Kconfig
@@ -2,7 +2,7 @@
config DRM_OMAP
tristate "OMAP DRM"
depends on DRM && !CONFIG_FB_OMAP2
- depends on ARCH_OMAP2PLUS
+ depends on ARCH_OMAP2PLUS || ARCH_MULTIPLATFORM
select DRM_KMS_HELPER
select OMAP2_DSS
select FB_SYS_FILLRECT
diff --git a/drivers/staging/omapdrm/omap_connector.c b/drivers/staging/omapdrm/omap_connector.c
index 38be186..91edb3f 100644
--- a/drivers/staging/omapdrm/omap_connector.c
+++ b/drivers/staging/omapdrm/omap_connector.c
@@ -146,11 +146,10 @@
enum drm_connector_status ret;
if (dssdrv->detect) {
- if (dssdrv->detect(dssdev)) {
+ if (dssdrv->detect(dssdev))
ret = connector_status_connected;
- } else {
+ else
ret = connector_status_disconnected;
- }
} else {
ret = connector_status_unknown;
}
@@ -383,9 +382,8 @@
return connector;
fail:
- if (connector) {
+ if (connector)
omap_connector_destroy(connector);
- }
return NULL;
}
diff --git a/drivers/staging/omapdrm/omap_crtc.c b/drivers/staging/omapdrm/omap_crtc.c
index 732f2ad..d87bd84 100644
--- a/drivers/staging/omapdrm/omap_crtc.c
+++ b/drivers/staging/omapdrm/omap_crtc.c
@@ -19,7 +19,7 @@
#include "omap_drv.h"
-#include "drm_mode.h"
+#include <drm/drm_mode.h>
#include "drm_crtc.h"
#include "drm_crtc_helper.h"
@@ -114,7 +114,7 @@
static void vblank_cb(void *arg)
{
- static uint32_t sequence = 0;
+ static uint32_t sequence;
struct drm_crtc *crtc = arg;
struct drm_device *dev = crtc->dev;
struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
@@ -263,8 +263,8 @@
return crtc;
fail:
- if (crtc) {
+ if (crtc)
omap_crtc_destroy(crtc);
- }
+
return NULL;
}
diff --git a/drivers/staging/omapdrm/omap_dmm_priv.h b/drivers/staging/omapdrm/omap_dmm_priv.h
index 08b22e9..273ec12 100644
--- a/drivers/staging/omapdrm/omap_dmm_priv.h
+++ b/drivers/staging/omapdrm/omap_dmm_priv.h
@@ -141,8 +141,7 @@
/* only one trans per engine for now */
struct dmm_txn txn;
- /* offset to lut associated with container */
- u32 *lut_offset;
+ bool async;
wait_queue_head_t wait_for_refill;
@@ -161,10 +160,11 @@
dma_addr_t refill_pa;
/* refill engines */
- struct semaphore engine_sem;
+ wait_queue_head_t engine_queue;
struct list_head idle_head;
struct refill_engine *engines;
int num_engines;
+ atomic_t engine_counter;
/* container information */
int container_width;
@@ -176,9 +176,6 @@
/* array of LUT - TCM containers */
struct tcm **tcm;
- /* LUT table storage */
- u32 *lut;
-
/* allocation list and lock */
struct list_head alloc_head;
};
diff --git a/drivers/staging/omapdrm/omap_dmm_tiler.c b/drivers/staging/omapdrm/omap_dmm_tiler.c
index 3ae3955..59bf438 100644
--- a/drivers/staging/omapdrm/omap_dmm_tiler.c
+++ b/drivers/staging/omapdrm/omap_dmm_tiler.c
@@ -29,7 +29,6 @@
#include <linux/mm.h>
#include <linux/time.h>
#include <linux/list.h>
-#include <linux/semaphore.h>
#include "omap_dmm_tiler.h"
#include "omap_dmm_priv.h"
@@ -120,6 +119,18 @@
return 0;
}
+static void release_engine(struct refill_engine *engine)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&list_lock, flags);
+ list_add(&engine->idle_node, &omap_dmm->idle_head);
+ spin_unlock_irqrestore(&list_lock, flags);
+
+ atomic_inc(&omap_dmm->engine_counter);
+ wake_up_interruptible(&omap_dmm->engine_queue);
+}
+
static irqreturn_t omap_dmm_irq_handler(int irq, void *arg)
{
struct dmm *dmm = arg;
@@ -130,9 +141,13 @@
writel(status, dmm->base + DMM_PAT_IRQSTATUS);
for (i = 0; i < dmm->num_engines; i++) {
- if (status & DMM_IRQSTAT_LST)
+ if (status & DMM_IRQSTAT_LST) {
wake_up_interruptible(&dmm->engines[i].wait_for_refill);
+ if (dmm->engines[i].async)
+ release_engine(&dmm->engines[i]);
+ }
+
status >>= 8;
}
@@ -146,17 +161,24 @@
{
struct dmm_txn *txn = NULL;
struct refill_engine *engine = NULL;
+ int ret;
+ unsigned long flags;
- down(&dmm->engine_sem);
+
+ /* wait until an engine is available */
+ ret = wait_event_interruptible(omap_dmm->engine_queue,
+ atomic_add_unless(&omap_dmm->engine_counter, -1, 0));
+ if (ret)
+ return ERR_PTR(ret);
/* grab an idle engine */
- spin_lock(&list_lock);
+ spin_lock_irqsave(&list_lock, flags);
if (!list_empty(&dmm->idle_head)) {
engine = list_entry(dmm->idle_head.next, struct refill_engine,
idle_node);
list_del(&engine->idle_node);
}
- spin_unlock(&list_lock);
+ spin_unlock_irqrestore(&list_lock, flags);
BUG_ON(!engine);
@@ -174,7 +196,7 @@
* Add region to DMM transaction. If pages or pages[i] is NULL, then the
* corresponding slot is cleared (ie. dummy_pa is programmed)
*/
-static int dmm_txn_append(struct dmm_txn *txn, struct pat_area *area,
+static void dmm_txn_append(struct dmm_txn *txn, struct pat_area *area,
struct page **pages, uint32_t npages, uint32_t roll)
{
dma_addr_t pat_pa = 0;
@@ -184,9 +206,6 @@
int columns = (1 + area->x1 - area->x0);
int rows = (1 + area->y1 - area->y0);
int i = columns*rows;
- u32 *lut = omap_dmm->lut + (engine->tcm->lut_id * omap_dmm->lut_width *
- omap_dmm->lut_height) +
- (area->y0 * omap_dmm->lut_width) + area->x0;
pat = alloc_dma(txn, sizeof(struct pat), &pat_pa);
@@ -209,13 +228,9 @@
page_to_phys(pages[n]) : engine->dmm->dummy_pa;
}
- /* fill in lut with new addresses */
- for (i = 0; i < rows; i++, lut += omap_dmm->lut_width)
- memcpy(lut, &data[i*columns], columns * sizeof(u32));
-
txn->last_pat = pat;
- return 0;
+ return;
}
/**
@@ -245,6 +260,9 @@
goto cleanup;
}
+ /* mark whether it is async to denote list management in IRQ handler */
+ engine->async = wait ? false : true;
+
/* kick reload */
writel(engine->refill_pa,
dmm->base + reg[PAT_DESCR][engine->id]);
@@ -259,11 +277,10 @@
}
cleanup:
- spin_lock(&list_lock);
- list_add(&engine->idle_node, &dmm->idle_head);
- spin_unlock(&list_lock);
+ /* only place engine back on list if we are done with it */
+ if (ret || wait)
+ release_engine(engine);
- up(&omap_dmm->engine_sem);
return ret;
}
@@ -279,7 +296,7 @@
txn = dmm_txn_init(omap_dmm, area->tcm);
if (IS_ERR_OR_NULL(txn))
- return PTR_ERR(txn);
+ return -ENOMEM;
tcm_for_each_slice(slice, *area, area_s) {
struct pat_area p_area = {
@@ -287,16 +304,13 @@
.x1 = slice.p1.x, .y1 = slice.p1.y,
};
- ret = dmm_txn_append(txn, &p_area, pages, npages, roll);
- if (ret)
- goto fail;
+ dmm_txn_append(txn, &p_area, pages, npages, roll);
roll += tcm_sizeof(slice);
}
ret = dmm_txn_commit(txn, wait);
-fail:
return ret;
}
@@ -333,6 +347,7 @@
struct tiler_block *block = kzalloc(sizeof(*block), GFP_KERNEL);
u32 min_align = 128;
int ret;
+ unsigned long flags;
BUG_ON(!validfmt(fmt));
@@ -354,9 +369,9 @@
}
/* add to allocation list */
- spin_lock(&list_lock);
+ spin_lock_irqsave(&list_lock, flags);
list_add(&block->alloc_node, &omap_dmm->alloc_head);
- spin_unlock(&list_lock);
+ spin_unlock_irqrestore(&list_lock, flags);
return block;
}
@@ -365,6 +380,7 @@
{
struct tiler_block *block = kzalloc(sizeof(*block), GFP_KERNEL);
int num_pages = (size + PAGE_SIZE - 1) >> PAGE_SHIFT;
+ unsigned long flags;
if (!block)
return ERR_PTR(-ENOMEM);
@@ -377,9 +393,9 @@
return ERR_PTR(-ENOMEM);
}
- spin_lock(&list_lock);
+ spin_lock_irqsave(&list_lock, flags);
list_add(&block->alloc_node, &omap_dmm->alloc_head);
- spin_unlock(&list_lock);
+ spin_unlock_irqrestore(&list_lock, flags);
return block;
}
@@ -388,13 +404,14 @@
int tiler_release(struct tiler_block *block)
{
int ret = tcm_free(&block->area);
+ unsigned long flags;
if (block->area.tcm)
dev_err(omap_dmm->dev, "failed to release block\n");
- spin_lock(&list_lock);
+ spin_lock_irqsave(&list_lock, flags);
list_del(&block->alloc_node);
- spin_unlock(&list_lock);
+ spin_unlock_irqrestore(&list_lock, flags);
kfree(block);
return ret;
@@ -505,7 +522,7 @@
return round_up(geom[fmt].cpp * w, PAGE_SIZE) * h;
}
-bool dmm_is_initialized(void)
+bool dmm_is_available(void)
{
return omap_dmm ? true : false;
}
@@ -514,16 +531,17 @@
{
struct tiler_block *block, *_block;
int i;
+ unsigned long flags;
if (omap_dmm) {
/* free all area regions */
- spin_lock(&list_lock);
+ spin_lock_irqsave(&list_lock, flags);
list_for_each_entry_safe(block, _block, &omap_dmm->alloc_head,
alloc_node) {
list_del(&block->alloc_node);
kfree(block);
}
- spin_unlock(&list_lock);
+ spin_unlock_irqrestore(&list_lock, flags);
for (i = 0; i < omap_dmm->num_lut; i++)
if (omap_dmm->tcm && omap_dmm->tcm[i])
@@ -532,15 +550,13 @@
kfree(omap_dmm->engines);
if (omap_dmm->refill_va)
- dma_free_coherent(omap_dmm->dev,
+ dma_free_writecombine(omap_dmm->dev,
REFILL_BUFFER_SIZE * omap_dmm->num_engines,
omap_dmm->refill_va,
omap_dmm->refill_pa);
if (omap_dmm->dummy_page)
__free_page(omap_dmm->dummy_page);
- vfree(omap_dmm->lut);
-
if (omap_dmm->irq > 0)
free_irq(omap_dmm->irq, omap_dmm);
@@ -556,7 +572,7 @@
{
int ret = -EFAULT, i;
struct tcm_area area = {0};
- u32 hwinfo, pat_geom, lut_table_size;
+ u32 hwinfo, pat_geom;
struct resource *mem;
omap_dmm = kzalloc(sizeof(*omap_dmm), GFP_KERNEL);
@@ -569,6 +585,8 @@
INIT_LIST_HEAD(&omap_dmm->alloc_head);
INIT_LIST_HEAD(&omap_dmm->idle_head);
+ init_waitqueue_head(&omap_dmm->engine_queue);
+
/* lookup hwmod data - base address and irq */
mem = platform_get_resource(dev, IORESOURCE_MEM, 0);
if (!mem) {
@@ -597,6 +615,8 @@
omap_dmm->container_width = 256;
omap_dmm->container_height = 128;
+ atomic_set(&omap_dmm->engine_counter, omap_dmm->num_engines);
+
/* read out actual LUT width and height */
pat_geom = readl(omap_dmm->base + DMM_PAT_GEOMETRY);
omap_dmm->lut_width = ((pat_geom >> 16) & 0xF) << 5;
@@ -628,16 +648,6 @@
*/
writel(0x7e7e7e7e, omap_dmm->base + DMM_PAT_IRQENABLE_SET);
- lut_table_size = omap_dmm->lut_width * omap_dmm->lut_height *
- omap_dmm->num_lut;
-
- omap_dmm->lut = vmalloc(lut_table_size * sizeof(*omap_dmm->lut));
- if (!omap_dmm->lut) {
- dev_err(&dev->dev, "could not allocate lut table\n");
- ret = -ENOMEM;
- goto fail;
- }
-
omap_dmm->dummy_page = alloc_page(GFP_KERNEL | __GFP_DMA32);
if (!omap_dmm->dummy_page) {
dev_err(&dev->dev, "could not allocate dummy page\n");
@@ -652,7 +662,7 @@
omap_dmm->dummy_pa = page_to_phys(omap_dmm->dummy_page);
/* alloc refill memory */
- omap_dmm->refill_va = dma_alloc_coherent(&dev->dev,
+ omap_dmm->refill_va = dma_alloc_writecombine(&dev->dev,
REFILL_BUFFER_SIZE * omap_dmm->num_engines,
&omap_dmm->refill_pa, GFP_KERNEL);
if (!omap_dmm->refill_va) {
@@ -670,7 +680,6 @@
goto fail;
}
- sema_init(&omap_dmm->engine_sem, omap_dmm->num_engines);
for (i = 0; i < omap_dmm->num_engines; i++) {
omap_dmm->engines[i].id = i;
omap_dmm->engines[i].dmm = omap_dmm;
@@ -720,9 +729,6 @@
.p1.y = omap_dmm->container_height - 1,
};
- for (i = 0; i < lut_table_size; i++)
- omap_dmm->lut[i] = omap_dmm->dummy_pa;
-
/* initialize all LUTs to dummy page entries */
for (i = 0; i < omap_dmm->num_lut; i++) {
area.tcm = omap_dmm->tcm[i];
diff --git a/drivers/staging/omapdrm/omap_dmm_tiler.h b/drivers/staging/omapdrm/omap_dmm_tiler.h
index 740911d..4fdd61e 100644
--- a/drivers/staging/omapdrm/omap_dmm_tiler.h
+++ b/drivers/staging/omapdrm/omap_dmm_tiler.h
@@ -16,7 +16,6 @@
#ifndef OMAP_DMM_TILER_H
#define OMAP_DMM_TILER_H
-#include <plat/cpu.h>
#include "omap_drv.h"
#include "tcm.h"
@@ -107,7 +106,7 @@
size_t tiler_size(enum tiler_fmt fmt, uint16_t w, uint16_t h);
size_t tiler_vsize(enum tiler_fmt fmt, uint16_t w, uint16_t h);
void tiler_align(enum tiler_fmt fmt, uint16_t *w, uint16_t *h);
-bool dmm_is_initialized(void);
+bool dmm_is_available(void);
extern struct platform_driver omap_dmm_driver;
@@ -139,9 +138,4 @@
}
}
-static inline int dmm_is_available(void)
-{
- return cpu_is_omap44xx();
-}
-
#endif
diff --git a/drivers/staging/omapdrm/omap_drv.c b/drivers/staging/omapdrm/omap_drv.c
index ebdb0b6..d4823fd 100644
--- a/drivers/staging/omapdrm/omap_drv.c
+++ b/drivers/staging/omapdrm/omap_drv.c
@@ -30,8 +30,6 @@
#define DRIVER_MINOR 0
#define DRIVER_PATCHLEVEL 0
-struct drm_device *drm_device;
-
static int num_crtc = CONFIG_DRM_OMAP_NUM_CRTCS;
MODULE_PARM_DESC(num_crtc, "Number of overlays to use as CRTCs");
@@ -53,9 +51,8 @@
{
struct omap_drm_private *priv = dev->dev_private;
DBG("dev=%p", dev);
- if (priv->fbdev) {
+ if (priv->fbdev)
drm_fb_helper_hotplug_event(priv->fbdev);
- }
}
static const struct drm_mode_config_funcs omap_mode_config_funcs = {
@@ -87,9 +84,9 @@
case OMAP_DSS_HOTPLUG_DISCONNECT: {
struct drm_device *dev = drm_device;
DBG("hotplug event: evt=%d, dev=%p", evt, dev);
- if (dev) {
+ if (dev)
drm_sysfs_hotplug_event(dev);
- }
+
return NOTIFY_OK;
}
default: /* don't care about other events for now */
@@ -213,9 +210,9 @@
struct drm_encoder *encoder =
omap_connector_attached_encoder(
priv->connectors[*j]);
- if (encoder) {
+ if (encoder)
mgr = omap_encoder_get_manager(encoder);
- }
+
}
(*j)++;
}
@@ -234,9 +231,9 @@
struct drm_encoder *encoder =
omap_connector_attached_encoder(
priv->connectors[idx]);
- if (encoder) {
+ if (encoder)
mgr = omap_encoder_get_manager(encoder);
- }
+
}
(*j)++;
}
@@ -355,9 +352,8 @@
*/
int max_overlays = min(omap_dss_get_num_overlays(), num_crtc);
- for (i = 0; i < omap_dss_get_num_overlay_managers(); i++) {
+ for (i = 0; i < omap_dss_get_num_overlay_managers(); i++)
create_encoder(dev, omap_dss_get_overlay_manager(i));
- }
for_each_dss_dev(dssdev) {
create_connector(dev, dssdev);
@@ -419,13 +415,14 @@
static int ioctl_get_param(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
+ struct omap_drm_private *priv = dev->dev_private;
struct drm_omap_param *args = data;
DBG("%p: param=%llu", dev, args->param);
switch (args->param) {
case OMAP_PARAM_CHIPSET_ID:
- args->value = GET_OMAP_TYPE;
+ args->value = priv->omaprev;
break;
default:
DBG("unknown parameter %lld", args->param);
@@ -469,15 +466,13 @@
VERB("%p:%p: handle=%d, op=%x", dev, file_priv, args->handle, args->op);
obj = drm_gem_object_lookup(dev, file_priv, args->handle);
- if (!obj) {
+ if (!obj)
return -ENOENT;
- }
ret = omap_gem_op_sync(obj, args->op);
- if (!ret) {
+ if (!ret)
ret = omap_gem_op_start(obj, args->op);
- }
drm_gem_object_unreference_unlocked(obj);
@@ -494,16 +489,14 @@
VERB("%p:%p: handle=%d", dev, file_priv, args->handle);
obj = drm_gem_object_lookup(dev, file_priv, args->handle);
- if (!obj) {
+ if (!obj)
return -ENOENT;
- }
/* XXX flushy, flushy */
ret = 0;
- if (!ret) {
+ if (!ret)
ret = omap_gem_op_finish(obj, args->op);
- }
drm_gem_object_unreference_unlocked(obj);
@@ -520,9 +513,8 @@
DBG("%p:%p: handle=%d", dev, file_priv, args->handle);
obj = drm_gem_object_lookup(dev, file_priv, args->handle);
- if (!obj) {
+ if (!obj)
return -ENOENT;
- }
args->size = omap_gem_mmap_size(obj);
args->offset = omap_gem_mmap_offset(obj);
@@ -557,19 +549,20 @@
*/
static int dev_load(struct drm_device *dev, unsigned long flags)
{
+ struct omap_drm_platform_data *pdata = dev->dev->platform_data;
struct omap_drm_private *priv;
int ret;
DBG("load: dev=%p", dev);
- drm_device = dev;
-
priv = kzalloc(sizeof(*priv), GFP_KERNEL);
if (!priv) {
dev_err(dev->dev, "could not allocate priv\n");
return -ENOMEM;
}
+ priv->omaprev = pdata->omaprev;
+
dev->dev_private = priv;
priv->wq = alloc_ordered_workqueue("omapdrm", 0);
@@ -595,9 +588,8 @@
drm_kms_helper_poll_init(dev);
ret = drm_vblank_init(dev, priv->num_crtcs);
- if (ret) {
+ if (ret)
dev_warn(dev->dev, "could not init vblank\n");
- }
return 0;
}
@@ -659,19 +651,22 @@
DBG("lastclose: dev=%p", dev);
- /* need to restore default rotation state.. not sure if there is
- * a cleaner way to restore properties to default state? Maybe
- * a flag that properties should automatically be restored to
- * default state on lastclose?
- */
- for (i = 0; i < priv->num_crtcs; i++) {
- drm_object_property_set_value(&priv->crtcs[i]->base,
- priv->rotation_prop, 0);
- }
+ if (priv->rotation_prop) {
+ /* need to restore default rotation state.. not sure
+ * if there is a cleaner way to restore properties to
+ * default state? Maybe a flag that properties should
+ * automatically be restored to default state on
+ * lastclose?
+ */
+ for (i = 0; i < priv->num_crtcs; i++) {
+ drm_object_property_set_value(&priv->crtcs[i]->base,
+ priv->rotation_prop, 0);
+ }
- for (i = 0; i < priv->num_planes; i++) {
- drm_object_property_set_value(&priv->planes[i]->base,
- priv->rotation_prop, 0);
+ for (i = 0; i < priv->num_planes; i++) {
+ drm_object_property_set_value(&priv->planes[i]->base,
+ priv->rotation_prop, 0);
+ }
}
ret = drm_fb_helper_restore_fbdev_mode(priv->fbdev);
diff --git a/drivers/staging/omapdrm/omap_drv.h b/drivers/staging/omapdrm/omap_drv.h
index 9dc72d1..1d4aea5 100644
--- a/drivers/staging/omapdrm/omap_drv.h
+++ b/drivers/staging/omapdrm/omap_drv.h
@@ -40,6 +40,8 @@
#define MAX_MAPPERS 2
struct omap_drm_private {
+ uint32_t omaprev;
+
unsigned int num_crtcs;
struct drm_crtc *crtcs[8];
@@ -189,9 +191,9 @@
int omap_gem_tiled_size(struct drm_gem_object *obj, uint16_t *w, uint16_t *h);
int omap_gem_tiled_stride(struct drm_gem_object *obj, uint32_t orient);
-struct dma_buf * omap_gem_prime_export(struct drm_device *dev,
+struct dma_buf *omap_gem_prime_export(struct drm_device *dev,
struct drm_gem_object *obj, int flags);
-struct drm_gem_object * omap_gem_prime_import(struct drm_device *dev,
+struct drm_gem_object *omap_gem_prime_import(struct drm_device *dev,
struct dma_buf *buffer);
static inline int align_pitch(int pitch, int width, int bpp)
@@ -216,17 +218,17 @@
for (i = 0; i < n; i++) {
bos[i] = drm_gem_object_lookup(dev, filp, handles[i]);
- if (!bos[i]) {
+ if (!bos[i])
goto fail;
- }
+
}
return 0;
fail:
- while (--i > 0) {
+ while (--i > 0)
drm_gem_object_unreference_unlocked(bos[i]);
- }
+
return -ENOENT;
}
diff --git a/drivers/staging/omapdrm/omap_encoder.c b/drivers/staging/omapdrm/omap_encoder.c
index 31c735d..5341d5e 100644
--- a/drivers/staging/omapdrm/omap_encoder.c
+++ b/drivers/staging/omapdrm/omap_encoder.c
@@ -72,9 +72,9 @@
for (i = 0; i < priv->num_connectors; i++) {
struct drm_connector *connector = priv->connectors[i];
- if (connector->encoder == encoder) {
+ if (connector->encoder == encoder)
omap_connector_mode_set(connector, mode);
- }
+
}
}
@@ -163,9 +163,8 @@
return encoder;
fail:
- if (encoder) {
+ if (encoder)
omap_encoder_destroy(encoder);
- }
return NULL;
}
diff --git a/drivers/staging/omapdrm/omap_fb.c b/drivers/staging/omapdrm/omap_fb.c
index 446801d..09028e9 100644
--- a/drivers/staging/omapdrm/omap_fb.c
+++ b/drivers/staging/omapdrm/omap_fb.c
@@ -253,6 +253,7 @@
int ret = 0, i, na, nb;
struct omap_framebuffer *ofba = to_omap_framebuffer(a);
struct omap_framebuffer *ofbb = to_omap_framebuffer(b);
+ uint32_t pinned_mask = 0;
na = a ? drm_format_num_planes(a->pixel_format) : 0;
nb = b ? drm_format_num_planes(b->pixel_format) : 0;
@@ -263,25 +264,24 @@
pa = (i < na) ? &ofba->planes[i] : NULL;
pb = (i < nb) ? &ofbb->planes[i] : NULL;
- if (pa) {
+ if (pa)
unpin(arg, pa->bo);
- pa->paddr = 0;
- }
if (pb && !ret) {
ret = omap_gem_get_paddr(pb->bo, &pb->paddr, true);
- if (!ret)
+ if (!ret) {
omap_gem_dma_sync(pb->bo, DMA_TO_DEVICE);
+ pinned_mask |= (1 << i);
+ }
}
}
if (ret) {
/* something went wrong.. unpin what has been pinned */
for (i = 0; i < nb; i++) {
- struct plane *pb = &ofba->planes[i];
- if (pb->paddr) {
+ if (pinned_mask & (1 << i)) {
+ struct plane *pb = &ofba->planes[i];
unpin(arg, pb->bo);
- pb->paddr = 0;
}
}
}
@@ -307,17 +307,16 @@
struct list_head *connector_list = &dev->mode_config.connector_list;
struct drm_connector *connector = from;
- if (!from) {
+ if (!from)
return list_first_entry(connector_list, typeof(*from), head);
- }
list_for_each_entry_from(connector, connector_list, head) {
if (connector != from) {
struct drm_encoder *encoder = connector->encoder;
struct drm_crtc *crtc = encoder ? encoder->crtc : NULL;
- if (crtc && crtc->fb == fb) {
+ if (crtc && crtc->fb == fb)
return connector;
- }
+
}
}
@@ -466,8 +465,8 @@
return fb;
fail:
- if (fb) {
+ if (fb)
omap_framebuffer_destroy(fb);
- }
+
return ERR_PTR(ret);
}
diff --git a/drivers/staging/omapdrm/omap_gem.c b/drivers/staging/omapdrm/omap_gem.c
index 66e2c2f..c38992b 100644
--- a/drivers/staging/omapdrm/omap_gem.c
+++ b/drivers/staging/omapdrm/omap_gem.c
@@ -25,7 +25,7 @@
#include "omap_dmm_tiler.h"
/* remove these once drm core helpers are merged */
-struct page ** _drm_gem_get_pages(struct drm_gem_object *obj, gfp_t gfpmask);
+struct page **_drm_gem_get_pages(struct drm_gem_object *obj, gfp_t gfpmask);
void _drm_gem_put_pages(struct drm_gem_object *obj, struct page **pages,
bool dirty, bool accessed);
int _drm_gem_create_mmap_offset_size(struct drm_gem_object *obj, size_t size);
@@ -521,9 +521,8 @@
/* if a shmem backed object, make sure we have pages attached now */
ret = get_pages(obj, &pages);
- if (ret) {
+ if (ret)
goto fail;
- }
/* where should we do corresponding put_pages().. we are mapping
* the original page, rather than thru a GART, so we can't rely
@@ -953,7 +952,7 @@
void *omap_gem_vaddr(struct drm_gem_object *obj)
{
struct omap_gem_object *omap_obj = to_omap_bo(obj);
- WARN_ON(! mutex_is_locked(&obj->dev->struct_mutex));
+ WARN_ON(!mutex_is_locked(&obj->dev->struct_mutex));
if (!omap_obj->vaddr) {
struct page **pages;
int ret = get_pages(obj, &pages);
@@ -972,7 +971,7 @@
struct omap_gem_object *omap_obj = to_omap_bo(obj);
uint64_t off = 0;
- WARN_ON(! mutex_is_locked(&dev->struct_mutex));
+ WARN_ON(!mutex_is_locked(&dev->struct_mutex));
if (obj->map_list.map)
off = (uint64_t)obj->map_list.hash.key;
@@ -1146,9 +1145,8 @@
struct omap_gem_sync_waiter *waiter =
kzalloc(sizeof(*waiter), GFP_KERNEL);
- if (!waiter) {
+ if (!waiter)
return -ENOMEM;
- }
waiter->omap_obj = omap_obj;
waiter->op = op;
@@ -1177,9 +1175,8 @@
}
spin_unlock(&sync_lock);
- if (waiter) {
+ if (waiter)
kfree(waiter);
- }
}
return ret;
}
@@ -1201,9 +1198,8 @@
struct omap_gem_sync_waiter *waiter =
kzalloc(sizeof(*waiter), GFP_ATOMIC);
- if (!waiter) {
+ if (!waiter)
return -ENOMEM;
- }
waiter->omap_obj = omap_obj;
waiter->op = op;
@@ -1285,9 +1281,8 @@
list_del(&omap_obj->mm_list);
- if (obj->map_list.map) {
+ if (obj->map_list.map)
drm_gem_free_mmap_offset(obj);
- }
/* this means the object is still pinned.. which really should
* not happen. I think..
@@ -1296,9 +1291,9 @@
/* don't free externally allocated backing memory */
if (!(omap_obj->flags & OMAP_BO_EXT_MEM)) {
- if (omap_obj->pages) {
+ if (omap_obj->pages)
omap_gem_detach_pages(obj);
- }
+
if (!is_shmem(obj)) {
dma_free_writecombine(dev->dev, obj->size,
omap_obj->vaddr, omap_obj->paddr);
@@ -1308,9 +1303,8 @@
}
/* don't free externally allocated syncobj */
- if (!(omap_obj->flags & OMAP_BO_EXT_SYNC)) {
+ if (!(omap_obj->flags & OMAP_BO_EXT_SYNC))
kfree(omap_obj->sync);
- }
drm_gem_object_release(obj);
@@ -1395,9 +1389,9 @@
*/
omap_obj->vaddr = dma_alloc_writecombine(dev->dev, size,
&omap_obj->paddr, GFP_KERNEL);
- if (omap_obj->vaddr) {
+ if (omap_obj->vaddr)
flags |= OMAP_BO_DMA;
- }
+
}
omap_obj->flags = flags;
@@ -1407,22 +1401,20 @@
omap_obj->height = gsize.tiled.height;
}
- if (flags & (OMAP_BO_DMA|OMAP_BO_EXT_MEM)) {
+ if (flags & (OMAP_BO_DMA|OMAP_BO_EXT_MEM))
ret = drm_gem_private_object_init(dev, obj, size);
- } else {
+ else
ret = drm_gem_object_init(dev, obj, size);
- }
- if (ret) {
+ if (ret)
goto fail;
- }
return obj;
fail:
- if (obj) {
+ if (obj)
omap_gem_free_object(obj);
- }
+
return NULL;
}
@@ -1435,7 +1427,7 @@
};
int i, j;
- if (!dmm_is_initialized()) {
+ if (!dmm_is_available()) {
/* DMM only supported on OMAP4 and later, so this isn't fatal */
dev_warn(dev->dev, "DMM not available, disable DMM support\n");
return;
diff --git a/drivers/staging/omapdrm/omap_gem_dmabuf.c b/drivers/staging/omapdrm/omap_gem_dmabuf.c
index c6f3ef6..9a30206 100644
--- a/drivers/staging/omapdrm/omap_gem_dmabuf.c
+++ b/drivers/staging/omapdrm/omap_gem_dmabuf.c
@@ -191,13 +191,13 @@
.mmap = omap_gem_dmabuf_mmap,
};
-struct dma_buf * omap_gem_prime_export(struct drm_device *dev,
+struct dma_buf *omap_gem_prime_export(struct drm_device *dev,
struct drm_gem_object *obj, int flags)
{
return dma_buf_export(obj, &omap_dmabuf_ops, obj->size, 0600);
}
-struct drm_gem_object * omap_gem_prime_import(struct drm_device *dev,
+struct drm_gem_object *omap_gem_prime_import(struct drm_device *dev,
struct dma_buf *buffer)
{
struct drm_gem_object *obj;
diff --git a/drivers/staging/omapdrm/omap_gem_helpers.c b/drivers/staging/omapdrm/omap_gem_helpers.c
index f895363..ffb8cce 100644
--- a/drivers/staging/omapdrm/omap_gem_helpers.c
+++ b/drivers/staging/omapdrm/omap_gem_helpers.c
@@ -32,7 +32,7 @@
* @obj: obj in question
* @gfpmask: gfp mask of requested pages
*/
-struct page ** _drm_gem_get_pages(struct drm_gem_object *obj, gfp_t gfpmask)
+struct page **_drm_gem_get_pages(struct drm_gem_object *obj, gfp_t gfpmask)
{
struct inode *inode;
struct address_space *mapping;
@@ -80,9 +80,9 @@
return pages;
fail:
- while (i--) {
+ while (i--)
page_cache_release(pages[i]);
- }
+
drm_free_large(pages);
return ERR_CAST(p);
}
diff --git a/drivers/staging/omapdrm/omap_plane.c b/drivers/staging/omapdrm/omap_plane.c
index 4bde639..2a8e5ba 100644
--- a/drivers/staging/omapdrm/omap_plane.c
+++ b/drivers/staging/omapdrm/omap_plane.c
@@ -416,26 +416,28 @@
struct omap_drm_private *priv = dev->dev_private;
struct drm_property *prop;
- prop = priv->rotation_prop;
- if (!prop) {
- const struct drm_prop_enum_list props[] = {
- { DRM_ROTATE_0, "rotate-0" },
- { DRM_ROTATE_90, "rotate-90" },
- { DRM_ROTATE_180, "rotate-180" },
- { DRM_ROTATE_270, "rotate-270" },
- { DRM_REFLECT_X, "reflect-x" },
- { DRM_REFLECT_Y, "reflect-y" },
- };
- prop = drm_property_create_bitmask(dev, 0, "rotation",
- props, ARRAY_SIZE(props));
- if (prop == NULL)
- return;
- priv->rotation_prop = prop;
+ if (priv->has_dmm) {
+ prop = priv->rotation_prop;
+ if (!prop) {
+ const struct drm_prop_enum_list props[] = {
+ { DRM_ROTATE_0, "rotate-0" },
+ { DRM_ROTATE_90, "rotate-90" },
+ { DRM_ROTATE_180, "rotate-180" },
+ { DRM_ROTATE_270, "rotate-270" },
+ { DRM_REFLECT_X, "reflect-x" },
+ { DRM_REFLECT_Y, "reflect-y" },
+ };
+ prop = drm_property_create_bitmask(dev, 0, "rotation",
+ props, ARRAY_SIZE(props));
+ if (prop == NULL)
+ return;
+ priv->rotation_prop = prop;
+ }
+ drm_object_attach_property(obj, prop, 0);
}
- drm_object_attach_property(obj, prop, 0);
- prop = priv->zorder_prop;
- if (!prop) {
+ prop = priv->zorder_prop;
+ if (!prop) {
prop = drm_property_create_range(dev, 0, "zorder", 0, 3);
if (prop == NULL)
return;
@@ -549,8 +551,8 @@
return plane;
fail:
- if (plane) {
+ if (plane)
omap_plane_destroy(plane);
- }
+
return NULL;
}
diff --git a/drivers/staging/ozwpan/ozevent.c b/drivers/staging/ozwpan/ozevent.c
index a48498b..50578ba 100644
--- a/drivers/staging/ozwpan/ozevent.c
+++ b/drivers/staging/ozwpan/ozevent.c
@@ -79,6 +79,7 @@
/*------------------------------------------------------------------------------
* Context: process
*/
+#ifdef CONFIG_DEBUG_FS
static void oz_events_clear(struct oz_evtdev *dev)
{
unsigned long irqstate;
@@ -88,7 +89,6 @@
dev->missed_events = 0;
spin_unlock_irqrestore(&dev->lock, irqstate);
}
-#ifdef CONFIG_DEBUG_FS
/*------------------------------------------------------------------------------
* Context: process
*/
diff --git a/drivers/staging/ozwpan/ozhcd.c b/drivers/staging/ozwpan/ozhcd.c
index 2e087ac..b2d77df 100644
--- a/drivers/staging/ozwpan/ozhcd.c
+++ b/drivers/staging/ozwpan/ozhcd.c
@@ -278,8 +278,7 @@
g_link_pool_size++;
}
spin_unlock_irqrestore(&g_link_lock, irq_state);
- if (urbl)
- kfree(urbl);
+ kfree(urbl);
}
}
/*------------------------------------------------------------------------------
@@ -2304,8 +2303,8 @@
*/
void oz_hcd_term(void)
{
- tasklet_disable(&g_urb_process_tasklet);
- tasklet_disable(&g_urb_cancel_tasklet);
+ tasklet_kill(&g_urb_process_tasklet);
+ tasklet_kill(&g_urb_cancel_tasklet);
platform_device_unregister(g_plat_dev);
platform_driver_unregister(&g_oz_plat_drv);
oz_trace("Pending urbs:%d\n", atomic_read(&g_pending_urbs));
diff --git a/drivers/staging/ozwpan/ozpd.c b/drivers/staging/ozwpan/ozpd.c
index 0b3648c..118a4db 100644
--- a/drivers/staging/ozwpan/ozpd.c
+++ b/drivers/staging/ozwpan/ozpd.c
@@ -402,8 +402,7 @@
f = 0;
}
spin_unlock_bh(&pd->tx_frame_lock);
- if (f)
- kfree(f);
+ kfree(f);
}
/*------------------------------------------------------------------------------
* Context: softirq-serialized
@@ -737,8 +736,7 @@
st = 0;
}
spin_unlock_bh(&pd->stream_lock);
- if (st)
- kfree(st);
+ kfree(st);
return 0;
}
/*------------------------------------------------------------------------------
diff --git a/drivers/staging/ozwpan/ozproto.c b/drivers/staging/ozwpan/ozproto.c
index cfb5160..e00a539 100644
--- a/drivers/staging/ozwpan/ozproto.c
+++ b/drivers/staging/ozwpan/ozproto.c
@@ -566,8 +566,7 @@
}
spin_unlock_bh(&g_polling_lock);
oz_pd_put(pd);
- if (t)
- kfree(t);
+ kfree(t);
t = t2;
} while (t);
g_timer_state = OZ_TIMER_IDLE;
diff --git a/drivers/staging/panel/panel.c b/drivers/staging/panel/panel.c
index 6e9f709..e3113ec 100644
--- a/drivers/staging/panel/panel.c
+++ b/drivers/staging/panel/panel.c
@@ -1758,7 +1758,7 @@
char *press_str = input->u.kbd.press_str;
if (press_str[0])
keypad_send_key(press_str,
- sizeof(press_str));
+ sizeof(input->u.kbd.press_str));
}
if (input->u.kbd.repeat_str[0]) {
@@ -1766,7 +1766,7 @@
if (input->high_timer >= KEYPAD_REP_START) {
input->high_timer -= KEYPAD_REP_DELAY;
keypad_send_key(repeat_str,
- sizeof(repeat_str));
+ sizeof(input->u.kbd.repeat_str));
}
/* we will need to come back here soon */
inputs_stable = 0;
@@ -1805,7 +1805,7 @@
if (input->high_timer >= KEYPAD_REP_START)
input->high_timer -= KEYPAD_REP_DELAY;
keypad_send_key(repeat_str,
- sizeof(repeat_str));
+ sizeof(input->u.kbd.repeat_str));
/* we will need to come back here soon */
inputs_stable = 0;
}
@@ -1824,7 +1824,7 @@
char *release_str = input->u.kbd.release_str;
if (release_str[0])
keypad_send_key(release_str,
- sizeof(release_str));
+ sizeof(input->u.kbd.release_str));
}
input->state = INPUT_ST_LOW;
diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211.h b/drivers/staging/rtl8187se/ieee80211/ieee80211.h
index 5f5a3022..8fc9f58 100644
--- a/drivers/staging/rtl8187se/ieee80211/ieee80211.h
+++ b/drivers/staging/rtl8187se/ieee80211/ieee80211.h
@@ -1221,7 +1221,7 @@
return ((struct ieee80211_device *)netdev_priv(dev))->priv;
}
-extern inline int ieee80211_is_empty_essid(const char *essid, int essid_len)
+static inline int ieee80211_is_empty_essid(const char *essid, int essid_len)
{
/* Single white space is for Linksys APs */
if (essid_len == 1 && essid[0] == ' ')
@@ -1237,7 +1237,7 @@
return 1;
}
-extern inline int ieee80211_is_valid_mode(struct ieee80211_device *ieee, int mode)
+static inline int ieee80211_is_valid_mode(struct ieee80211_device *ieee, int mode)
{
/*
* It is possible for both access points and our device to support
@@ -1263,7 +1263,7 @@
return 0;
}
-extern inline int ieee80211_get_hdrlen(u16 fc)
+static inline int ieee80211_get_hdrlen(u16 fc)
{
int hdrlen = 24;
diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_crypt.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_crypt.c
index b3882ae..694eae3 100644
--- a/drivers/staging/rtl8187se/ieee80211/ieee80211_crypt.c
+++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_crypt.c
@@ -11,12 +11,14 @@
*
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
//#include <linux/config.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
-#include <asm/string.h>
-#include <asm/errno.h>
+#include <linux/string.h>
+#include <linux/errno.h>
#include "ieee80211.h"
@@ -66,8 +68,7 @@
spin_lock_irqsave(&ieee->lock, flags);
ieee80211_crypt_deinit_entries(ieee, 0);
if (!list_empty(&ieee->crypt_deinit_list)) {
- printk(KERN_DEBUG "%s: entries remaining in delayed crypt "
- "deletion list\n", ieee->dev->name);
+ pr_debug("entries remaining in delayed crypt deletion list\n");
ieee->crypt_deinit_timer.expires = jiffies + HZ;
add_timer(&ieee->crypt_deinit_timer);
}
@@ -118,8 +119,7 @@
list_add(&alg->list, &hcrypt->algs);
spin_unlock_irqrestore(&hcrypt->lock, flags);
- printk(KERN_DEBUG "ieee80211_crypt: registered algorithm '%s'\n",
- ops->name);
+ pr_debug("registered algorithm '%s'\n", ops->name);
return 0;
}
@@ -146,8 +146,7 @@
spin_unlock_irqrestore(&hcrypt->lock, flags);
if (del_alg) {
- printk(KERN_DEBUG "ieee80211_crypt: unregistered algorithm "
- "'%s'\n", ops->name);
+ pr_debug("unregistered algorithm '%s'\n", ops->name);
kfree(del_alg);
}
@@ -155,7 +154,7 @@
}
-struct ieee80211_crypto_ops * ieee80211_get_crypto_ops(const char *name)
+struct ieee80211_crypto_ops *ieee80211_get_crypto_ops(const char *name)
{
unsigned long flags;
struct list_head *ptr;
@@ -182,7 +181,7 @@
}
-static void * ieee80211_crypt_null_init(int keyidx) { return (void *) 1; }
+static void *ieee80211_crypt_null_init(int keyidx) { return (void *) 1; }
static void ieee80211_crypt_null_deinit(void *priv) {}
static struct ieee80211_crypto_ops ieee80211_crypt_null = {
@@ -234,9 +233,8 @@
alg = list_entry(ptr, struct ieee80211_crypto_alg, list);
if (alg) {
list_del(ptr);
- printk(KERN_DEBUG
- "ieee80211_crypt: unregistered algorithm '%s' (deinit)\n",
- alg->ops->name);
+ pr_debug("unregistered algorithm '%s' (deinit)\n",
+ alg->ops->name);
kfree(alg);
}
}
diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_crypt.h b/drivers/staging/rtl8187se/ieee80211/ieee80211_crypt.h
index b58a3bc..0b4ea43 100644
--- a/drivers/staging/rtl8187se/ieee80211/ieee80211_crypt.h
+++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_crypt.h
@@ -77,7 +77,7 @@
int ieee80211_register_crypto_ops(struct ieee80211_crypto_ops *ops);
int ieee80211_unregister_crypto_ops(struct ieee80211_crypto_ops *ops);
-struct ieee80211_crypto_ops * ieee80211_get_crypto_ops(const char *name);
+struct ieee80211_crypto_ops *ieee80211_get_crypto_ops(const char *name);
void ieee80211_crypt_deinit_entries(struct ieee80211_device *, int);
void ieee80211_crypt_deinit_handler(unsigned long);
void ieee80211_crypt_delayed_deinit(struct ieee80211_device *ieee,
diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_crypt_ccmp.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_crypt_ccmp.c
index 6aaaa2f..f5949e8 100644
--- a/drivers/staging/rtl8187se/ieee80211/ieee80211_crypt_ccmp.c
+++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_crypt_ccmp.c
@@ -9,6 +9,8 @@
* more details.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
//#include <linux/config.h>
#include <linux/module.h>
#include <linux/init.h>
@@ -18,7 +20,7 @@
#include <linux/netdevice.h>
#include <linux/if_ether.h>
#include <linux/if_arp.h>
-#include <asm/string.h>
+#include <linux/string.h>
#include <linux/wireless.h>
#include "ieee80211.h"
@@ -64,7 +66,7 @@
crypto_cipher_encrypt_one((void *)tfm, ct, pt);
}
-static void * ieee80211_ccmp_init(int key_idx)
+static void *ieee80211_ccmp_init(int key_idx)
{
struct ieee80211_ccmp_data *priv;
@@ -75,8 +77,7 @@
priv->tfm = (void *)crypto_alloc_cipher("aes", 0, CRYPTO_ALG_ASYNC);
if (IS_ERR(priv->tfm)) {
- printk(KERN_DEBUG "ieee80211_crypt_ccmp: could not allocate "
- "crypto API aes\n");
+ pr_debug("could not allocate crypto API aes\n");
priv->tfm = NULL;
goto fail;
}
@@ -128,7 +129,7 @@
/*
qc_included = ((WLAN_FC_GET_TYPE(fc) == IEEE80211_FTYPE_DATA) &&
(WLAN_FC_GET_STYPE(fc) & 0x08));
- */
+ */
// fixed by David :2006.9.6
qc_included = ((WLAN_FC_GET_TYPE(fc) == IEEE80211_FTYPE_DATA) &&
(WLAN_FC_GET_STYPE(fc) & 0x80));
@@ -282,23 +283,22 @@
keyidx = pos[3];
if (!(keyidx & (1 << 5))) {
if (net_ratelimit()) {
- printk(KERN_DEBUG "CCMP: received packet without ExtIV"
- " flag from %pM\n", hdr->addr2);
+ pr_debug("received packet without ExtIV flag from %pM\n",
+ hdr->addr2);
}
key->dot11RSNAStatsCCMPFormatErrors++;
return -2;
}
keyidx >>= 6;
if (key->key_idx != keyidx) {
- printk(KERN_DEBUG "CCMP: RX tkey->key_idx=%d frame "
- "keyidx=%d priv=%p\n", key->key_idx, keyidx, priv);
+ pr_debug("RX tkey->key_idx=%d frame keyidx=%d priv=%p\n",
+ key->key_idx, keyidx, priv);
return -6;
}
if (!key->key_set) {
if (net_ratelimit()) {
- printk(KERN_DEBUG "CCMP: received packet from %pM"
- " with keyid=%d that does not have a configured"
- " key\n", hdr->addr2, keyidx);
+ pr_debug("received packet from %pM with keyid=%d that does not have a configured key\n",
+ hdr->addr2, keyidx);
}
return -3;
}
@@ -313,9 +313,8 @@
if (memcmp(pn, key->rx_pn, CCMP_PN_LEN) <= 0) {
if (net_ratelimit()) {
- printk(KERN_DEBUG "CCMP: replay detected: STA=%pM"
- " previous PN %pm received PN %pm\n",
- hdr->addr2, key->rx_pn, pn);
+ pr_debug("replay detected: STA=%pM previous PN %pm received PN %pm\n",
+ hdr->addr2, key->rx_pn, pn);
}
key->dot11RSNAStatsCCMPReplays++;
return -4;
@@ -341,10 +340,9 @@
}
if (memcmp(mic, a, CCMP_MIC_LEN) != 0) {
- if (net_ratelimit()) {
- printk(KERN_DEBUG "CCMP: decrypt failed: STA="
- "%pM\n", hdr->addr2);
- }
+ if (net_ratelimit())
+ pr_debug("decrypt failed: STA=%pM\n", hdr->addr2);
+
key->dot11RSNAStatsCCMPDecryptErrors++;
return -5;
}
@@ -415,7 +413,7 @@
}
-static char * ieee80211_ccmp_print_stats(char *p, void *priv)
+static char *ieee80211_ccmp_print_stats(char *p, void *priv)
{
struct ieee80211_ccmp_data *ccmp = priv;
p += sprintf(p, "key[%d] alg=CCMP key_set=%d "
diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_crypt_wep.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_crypt_wep.c
index 58f3eeb..bba7714 100644
--- a/drivers/staging/rtl8187se/ieee80211/ieee80211_crypt_wep.c
+++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_crypt_wep.c
@@ -9,13 +9,15 @@
* more details.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
//#include <linux/config.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/random.h>
#include <linux/skbuff.h>
-#include <asm/string.h>
+#include <linux/string.h>
#include "ieee80211.h"
@@ -40,7 +42,7 @@
};
-static void * prism2_wep_init(int keyidx)
+static void *prism2_wep_init(int keyidx)
{
struct prism2_wep_data *priv;
@@ -50,15 +52,13 @@
priv->key_idx = keyidx;
priv->tx_tfm = crypto_alloc_blkcipher("ecb(arc4)", 0, CRYPTO_ALG_ASYNC);
if (IS_ERR(priv->tx_tfm)) {
- printk(KERN_DEBUG "ieee80211_crypt_wep: could not allocate "
- "crypto API arc4\n");
+ pr_debug("could not allocate crypto API arc4\n");
priv->tx_tfm = NULL;
goto fail;
}
priv->rx_tfm = crypto_alloc_blkcipher("ecb(arc4)", 0, CRYPTO_ALG_ASYNC);
if (IS_ERR(priv->rx_tfm)) {
- printk(KERN_DEBUG "ieee80211_crypt_wep: could not allocate "
- "crypto API arc4\n");
+ pr_debug("could not allocate crypto API arc4\n");
priv->rx_tfm = NULL;
goto fail;
}
@@ -217,7 +217,7 @@
memmove(skb->data + 4, skb->data, hdr_len);
skb_pull(skb, 4);
skb_trim(skb, skb->len - 4);
- return 0;
+ return 0;
}
@@ -248,7 +248,7 @@
}
-static char * prism2_wep_print_stats(char *p, void *priv)
+static char *prism2_wep_print_stats(char *p, void *priv)
{
struct prism2_wep_data *wep = priv;
p += sprintf(p, "key[%d] alg=WEP len=%d\n",
@@ -289,5 +289,5 @@
void ieee80211_wep_null(void)
{
// printk("============>%s()\n", __func__);
- return;
+ return;
}
diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_module.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_module.c
index 9422573..4358c4b 100644
--- a/drivers/staging/rtl8187se/ieee80211/ieee80211_module.c
+++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_module.c
@@ -48,7 +48,7 @@
#include <linux/types.h>
#include <linux/wireless.h>
#include <linux/etherdevice.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
#include <net/arp.h>
#include <net/net_namespace.h>
@@ -69,8 +69,7 @@
MAX_NETWORK_COUNT, sizeof(struct ieee80211_network),
GFP_KERNEL);
if (!ieee->networks) {
- printk(KERN_WARNING "%s: Out of memory allocating beacons\n",
- ieee->dev->name);
+ netdev_warn(ieee->dev, "Out of memory allocating beacons\n");
return -ENOMEM;
}
@@ -100,7 +99,7 @@
{
struct ieee80211_device *ieee;
struct net_device *dev;
- int i,err;
+ int i, err;
IEEE80211_DEBUG_INFO("Initializing...\n");
@@ -140,11 +139,11 @@
spin_lock_init(&ieee->wpax_suitlist_lock);
ieee->wpax_type_set = 0;
- ieee->wpa_enabled = 0;
- ieee->tkip_countermeasures = 0;
- ieee->drop_unencrypted = 0;
- ieee->privacy_invoked = 0;
- ieee->ieee802_1x = 1;
+ ieee->wpa_enabled = 0;
+ ieee->tkip_countermeasures = 0;
+ ieee->drop_unencrypted = 0;
+ ieee->privacy_invoked = 0;
+ ieee->ieee802_1x = 1;
ieee->raw_tx = 0;
ieee80211_softmac_init(ieee);
@@ -153,9 +152,9 @@
INIT_LIST_HEAD(&ieee->ibss_mac_hash[i]);
for (i = 0; i < 17; i++) {
- ieee->last_rxseq_num[i] = -1;
- ieee->last_rxfrag_num[i] = -1;
- ieee->last_packet_time[i] = 0;
+ ieee->last_rxseq_num[i] = -1;
+ ieee->last_rxfrag_num[i] = -1;
+ ieee->last_packet_time[i] = 0;
}
//These function were added to load crypte module autoly
ieee80211_tkip_null();
diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_rx.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_rx.c
index 3a72449..446f15e 100644
--- a/drivers/staging/rtl8187se/ieee80211/ieee80211_rx.c
+++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_rx.c
@@ -39,7 +39,7 @@
#include <linux/types.h>
#include <linux/wireless.h>
#include <linux/etherdevice.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
#include <linux/ctype.h>
#include "ieee80211.h"
@@ -65,7 +65,7 @@
/* Called only as a tasklet (software IRQ) */
static struct ieee80211_frag_entry *
ieee80211_frag_cache_find(struct ieee80211_device *ieee, unsigned int seq,
- unsigned int frag, u8 tid,u8 *src, u8 *dst)
+ unsigned int frag, u8 tid, u8 *src, u8 *dst)
{
struct ieee80211_frag_entry *entry;
int i;
@@ -107,18 +107,18 @@
struct ieee80211_hdr_4addrqos *hdr_4addrqos;
u8 tid;
- if (((fc & IEEE80211_FCTL_DSTODS) == IEEE80211_FCTL_DSTODS)&&IEEE80211_QOS_HAS_SEQ(fc)) {
- hdr_4addrqos = (struct ieee80211_hdr_4addrqos *)hdr;
- tid = le16_to_cpu(hdr_4addrqos->qos_ctl) & IEEE80211_QOS_TID;
- tid = UP2AC(tid);
- tid ++;
+ if (((fc & IEEE80211_FCTL_DSTODS) == IEEE80211_FCTL_DSTODS) && IEEE80211_QOS_HAS_SEQ(fc)) {
+ hdr_4addrqos = (struct ieee80211_hdr_4addrqos *)hdr;
+ tid = le16_to_cpu(hdr_4addrqos->qos_ctl) & IEEE80211_QOS_TID;
+ tid = UP2AC(tid);
+ tid++;
} else if (IEEE80211_QOS_HAS_SEQ(fc)) {
- hdr_3addrqos = (struct ieee80211_hdr_3addrqos *)hdr;
- tid = le16_to_cpu(hdr_3addrqos->qos_ctl) & IEEE80211_QOS_TID;
- tid = UP2AC(tid);
- tid ++;
+ hdr_3addrqos = (struct ieee80211_hdr_3addrqos *)hdr;
+ tid = le16_to_cpu(hdr_3addrqos->qos_ctl) & IEEE80211_QOS_TID;
+ tid = UP2AC(tid);
+ tid++;
} else {
- tid = 0;
+ tid = 0;
}
if (frag == 0) {
@@ -129,7 +129,7 @@
2 /* alignment */ +
8 /* WEP */ +
ETH_ALEN /* WDS */ +
- (IEEE80211_QOS_HAS_SEQ(fc)?2:0) /* QOS Control */);
+ (IEEE80211_QOS_HAS_SEQ(fc) ? 2 : 0) /* QOS Control */);
if (skb == NULL)
return NULL;
@@ -150,7 +150,7 @@
} else {
/* received a fragment of a frame for which the head fragment
* should have already been received */
- entry = ieee80211_frag_cache_find(ieee, seq, frag, tid,hdr->addr2,
+ entry = ieee80211_frag_cache_find(ieee, seq, frag, tid, hdr->addr2,
hdr->addr1);
if (entry != NULL) {
entry->last_frag = frag;
@@ -174,21 +174,21 @@
struct ieee80211_hdr_4addrqos *hdr_4addrqos;
u8 tid;
- if(((fc & IEEE80211_FCTL_DSTODS) == IEEE80211_FCTL_DSTODS)&&IEEE80211_QOS_HAS_SEQ(fc)) {
- hdr_4addrqos = (struct ieee80211_hdr_4addrqos *)hdr;
- tid = le16_to_cpu(hdr_4addrqos->qos_ctl) & IEEE80211_QOS_TID;
- tid = UP2AC(tid);
- tid ++;
+ if (((fc & IEEE80211_FCTL_DSTODS) == IEEE80211_FCTL_DSTODS) && IEEE80211_QOS_HAS_SEQ(fc)) {
+ hdr_4addrqos = (struct ieee80211_hdr_4addrqos *)hdr;
+ tid = le16_to_cpu(hdr_4addrqos->qos_ctl) & IEEE80211_QOS_TID;
+ tid = UP2AC(tid);
+ tid++;
} else if (IEEE80211_QOS_HAS_SEQ(fc)) {
- hdr_3addrqos = (struct ieee80211_hdr_3addrqos *)hdr;
- tid = le16_to_cpu(hdr_3addrqos->qos_ctl) & IEEE80211_QOS_TID;
- tid = UP2AC(tid);
- tid ++;
+ hdr_3addrqos = (struct ieee80211_hdr_3addrqos *)hdr;
+ tid = le16_to_cpu(hdr_3addrqos->qos_ctl) & IEEE80211_QOS_TID;
+ tid = UP2AC(tid);
+ tid++;
} else {
- tid = 0;
+ tid = 0;
}
- entry = ieee80211_frag_cache_find(ieee, seq, -1, tid,hdr->addr2,
+ entry = ieee80211_frag_cache_find(ieee, seq, -1, tid, hdr->addr2,
hdr->addr1);
if (entry == NULL) {
@@ -227,7 +227,7 @@
ieee80211_rx_mgt(ieee, (struct ieee80211_hdr_4addr *)skb->data,
rx_stats);
- if((ieee->state == IEEE80211_LINKED)&&(memcmp(hdr->addr3,ieee->current_network.bssid,ETH_ALEN))) {
+ if ((ieee->state == IEEE80211_LINKED) && (memcmp(hdr->addr3, ieee->current_network.bssid, ETH_ALEN))) {
dev_kfree_skb_any(skb);
return 0;
}
@@ -244,11 +244,9 @@
/* See IEEE 802.1H for LLC/SNAP encapsulation/decapsulation */
/* Ethernet-II snap header (RFC1042 for most EtherTypes) */
-static unsigned char rfc1042_header[] =
-{ 0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00 };
+static unsigned char rfc1042_header[] = { 0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00 };
/* Bridge-Tunnel header (for EtherTypes ETH_P_AARP and ETH_P_IPX) */
-static unsigned char bridge_tunnel_header[] =
-{ 0xaa, 0xaa, 0x03, 0x00, 0x00, 0xf8 };
+static unsigned char bridge_tunnel_header[] = { 0xaa, 0xaa, 0x03, 0x00, 0x00, 0xf8 };
/* No encapsulation header if EtherType < 0x600 (=length) */
/* Called by ieee80211_rx_frame_decrypt */
@@ -294,7 +292,7 @@
/* Called only as a tasklet (software IRQ), by ieee80211_rx */
static inline int
-ieee80211_rx_frame_decrypt(struct ieee80211_device* ieee, struct sk_buff *skb,
+ieee80211_rx_frame_decrypt(struct ieee80211_device *ieee, struct sk_buff *skb,
struct ieee80211_crypt_data *crypt)
{
struct ieee80211_hdr_4addr *hdr;
@@ -310,9 +308,9 @@
if (ieee->tkip_countermeasures &&
strcmp(crypt->ops->name, "TKIP") == 0) {
if (net_ratelimit()) {
- printk(KERN_DEBUG "%s: TKIP countermeasures: dropped "
- "received packet from %pM\n",
- ieee->dev->name, hdr->addr2);
+ netdev_dbg(ieee->dev,
+ "TKIP countermeasures: dropped received packet from %pM\n",
+ ieee->dev->name, hdr->addr2);
}
return -1;
}
@@ -339,7 +337,7 @@
/* Called only as a tasklet (software IRQ), by ieee80211_rx */
static inline int
-ieee80211_rx_frame_decrypt_msdu(struct ieee80211_device* ieee, struct sk_buff *skb,
+ieee80211_rx_frame_decrypt_msdu(struct ieee80211_device *ieee, struct sk_buff *skb,
int keyidx, struct ieee80211_crypt_data *crypt)
{
struct ieee80211_hdr_4addr *hdr;
@@ -355,9 +353,9 @@
res = crypt->ops->decrypt_msdu(skb, keyidx, hdrlen, crypt->priv);
atomic_dec(&crypt->refcnt);
if (res < 0) {
- printk(KERN_DEBUG "%s: MSDU decryption/MIC verification failed"
- " (SA=%pM keyidx=%d)\n",
- ieee->dev->name, hdr->addr2, keyidx);
+ netdev_dbg(ieee->dev,
+ "MSDU decryption/MIC verification failed (SA=%pM keyidx=%d)\n",
+ hdr->addr2, keyidx);
return -1;
}
@@ -381,18 +379,18 @@
u8 tid;
//TO2DS and QoS
- if(((fc & IEEE80211_FCTL_DSTODS) == IEEE80211_FCTL_DSTODS)&&IEEE80211_QOS_HAS_SEQ(fc)) {
- hdr_4addrqos = (struct ieee80211_hdr_4addrqos *)header;
- tid = le16_to_cpu(hdr_4addrqos->qos_ctl) & IEEE80211_QOS_TID;
- tid = UP2AC(tid);
- tid ++;
- } else if(IEEE80211_QOS_HAS_SEQ(fc)) { //QoS
- hdr_3addrqos = (struct ieee80211_hdr_3addrqos *)header;
- tid = le16_to_cpu(hdr_3addrqos->qos_ctl) & IEEE80211_QOS_TID;
- tid = UP2AC(tid);
- tid ++;
+ if (((fc & IEEE80211_FCTL_DSTODS) == IEEE80211_FCTL_DSTODS) && IEEE80211_QOS_HAS_SEQ(fc)) {
+ hdr_4addrqos = (struct ieee80211_hdr_4addrqos *)header;
+ tid = le16_to_cpu(hdr_4addrqos->qos_ctl) & IEEE80211_QOS_TID;
+ tid = UP2AC(tid);
+ tid++;
+ } else if (IEEE80211_QOS_HAS_SEQ(fc)) { //QoS
+ hdr_3addrqos = (struct ieee80211_hdr_3addrqos *)header;
+ tid = le16_to_cpu(hdr_3addrqos->qos_ctl) & IEEE80211_QOS_TID;
+ tid = UP2AC(tid);
+ tid++;
} else { // no QoS
- tid = 0;
+ tid = 0;
}
switch (ieee->iw_mode) {
case IW_MODE_ADHOC:
@@ -411,7 +409,8 @@
if (p == &ieee->ibss_mac_hash[index]) {
entry = kmalloc(sizeof(struct ieee_ibss_seq), GFP_ATOMIC);
if (!entry) {
- printk(KERN_WARNING "Cannot malloc new mac entry\n");
+ netdev_warn(ieee->dev,
+ "Cannot malloc new mac entry\n");
return 0;
}
memcpy(entry->mac, mac, ETH_ALEN);
@@ -442,7 +441,7 @@
// }
if ((*last_seq == seq) &&
time_after(*last_time + IEEE_PACKET_RETRY_TIME, jiffies)) {
- if (*last_frag == frag){
+ if (*last_frag == frag) {
//printk(KERN_WARNING "[1] go drop!\n");
goto drop;
@@ -493,8 +492,7 @@
stats = &ieee->stats;
if (skb->len < 10) {
- printk(KERN_INFO "%s: SKB length < 10\n",
- dev->name);
+ netdev_info(ieee->dev, "SKB length < 10\n");
goto rx_dropped;
}
@@ -506,19 +504,12 @@
frag = WLAN_GET_SEQ_FRAG(sc);
//YJ,add,080828,for keep alive
- if((fc & IEEE80211_FCTL_TODS) != IEEE80211_FCTL_TODS)
- {
- if(!memcmp(hdr->addr1,dev->dev_addr, ETH_ALEN))
- {
+ if ((fc & IEEE80211_FCTL_TODS) != IEEE80211_FCTL_TODS) {
+ if (!memcmp(hdr->addr1, dev->dev_addr, ETH_ALEN))
ieee->NumRxUnicast++;
- }
- }
- else
- {
- if(!memcmp(hdr->addr3, dev->dev_addr, ETH_ALEN))
- {
+ } else {
+ if (!memcmp(hdr->addr3, dev->dev_addr, ETH_ALEN))
ieee->NumRxUnicast++;
- }
}
//YJ,add,080828,for keep alive,end
@@ -577,12 +568,12 @@
case IEEE80211_FCTL_FROMDS:
memcpy(dst, hdr->addr1, ETH_ALEN);
memcpy(src, hdr->addr3, ETH_ALEN);
- memcpy(bssid,hdr->addr2,ETH_ALEN);
+ memcpy(bssid, hdr->addr2, ETH_ALEN);
break;
case IEEE80211_FCTL_TODS:
memcpy(dst, hdr->addr3, ETH_ALEN);
memcpy(src, hdr->addr2, ETH_ALEN);
- memcpy(bssid,hdr->addr1,ETH_ALEN);
+ memcpy(bssid, hdr->addr1, ETH_ALEN);
break;
case IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS:
if (skb->len < IEEE80211_DATA_HDR4_LEN)
@@ -594,7 +585,7 @@
case 0:
memcpy(dst, hdr->addr1, ETH_ALEN);
memcpy(src, hdr->addr2, ETH_ALEN);
- memcpy(bssid,hdr->addr3,ETH_ALEN);
+ memcpy(bssid, hdr->addr3, ETH_ALEN);
break;
}
@@ -607,7 +598,7 @@
if (stype != IEEE80211_STYPE_DATA &&
stype != IEEE80211_STYPE_DATA_CFACK &&
stype != IEEE80211_STYPE_DATA_CFPOLL &&
- stype != IEEE80211_STYPE_DATA_CFACKPOLL&&
+ stype != IEEE80211_STYPE_DATA_CFACKPOLL &&
stype != IEEE80211_STYPE_QOS_DATA//add by David,2006.8.4
) {
if (stype != IEEE80211_STYPE_NULLFUNC)
@@ -618,9 +609,8 @@
type, stype, skb->len);
goto rx_dropped;
}
- if(memcmp(bssid,ieee->current_network.bssid,ETH_ALEN)) {
+ if (memcmp(bssid, ieee->current_network.bssid, ETH_ALEN))
goto rx_dropped;
- }
ieee->NumRxDataInPeriod++;
ieee->NumRxOkTotal++;
@@ -653,9 +643,8 @@
flen -= hdrlen;
if (frag_skb->tail + flen > frag_skb->end) {
- printk(KERN_WARNING "%s: host decrypted and "
- "reassembled frame did not fit skb\n",
- dev->name);
+ netdev_warn(ieee->dev,
+ "host decrypted and reassembled frame did not fit skb\n");
ieee80211_frag_cache_invalidate(ieee, hdr);
goto rx_dropped;
}
@@ -804,7 +793,7 @@
case IEEE80211_OFDM_RATE_54MB:
return 1;
}
- return 0;
+ return 0;
}
static inline int ieee80211_SignalStrengthTranslate(
@@ -814,46 +803,27 @@
int RetSS;
// Step 1. Scale mapping.
- if(CurrSS >= 71 && CurrSS <= 100)
- {
+ if (CurrSS >= 71 && CurrSS <= 100)
RetSS = 90 + ((CurrSS - 70) / 3);
- }
- else if(CurrSS >= 41 && CurrSS <= 70)
- {
+ else if (CurrSS >= 41 && CurrSS <= 70)
RetSS = 78 + ((CurrSS - 40) / 3);
- }
- else if(CurrSS >= 31 && CurrSS <= 40)
- {
+ else if (CurrSS >= 31 && CurrSS <= 40)
RetSS = 66 + (CurrSS - 30);
- }
- else if(CurrSS >= 21 && CurrSS <= 30)
- {
+ else if (CurrSS >= 21 && CurrSS <= 30)
RetSS = 54 + (CurrSS - 20);
- }
- else if(CurrSS >= 5 && CurrSS <= 20)
- {
+ else if (CurrSS >= 5 && CurrSS <= 20)
RetSS = 42 + (((CurrSS - 5) * 2) / 3);
- }
- else if(CurrSS == 4)
- {
+ else if (CurrSS == 4)
RetSS = 36;
- }
- else if(CurrSS == 3)
- {
+ else if (CurrSS == 3)
RetSS = 27;
- }
- else if(CurrSS == 2)
- {
+ else if (CurrSS == 2)
RetSS = 18;
- }
- else if(CurrSS == 1)
- {
+ else if (CurrSS == 1)
RetSS = 9;
- }
else
- {
RetSS = CurrSS;
- }
+
//RT_TRACE(COMP_DBG, DBG_LOUD, ("##### After Mapping: LastSS: %d, CurrSS: %d, RetSS: %d\n", LastSS, CurrSS, RetSS));
// Step 2. Smoothing.
@@ -867,20 +837,16 @@
struct ieee80211_device *ieee,
struct ieee80211_info_element *info_element,
struct ieee80211_network *network,
- u8 * addr2
+ u8 *addr2
)
{
- if(IS_DOT11D_ENABLE(ieee))
- {
- if(info_element->len!= 0)
- {
+ if (IS_DOT11D_ENABLE(ieee)) {
+ if (info_element->len != 0) {
memcpy(network->CountryIeBuf, info_element->data, info_element->len);
network->CountryIeLen = info_element->len;
- if(!IS_COUNTRY_IE_VALID(ieee))
- {
+ if (!IS_COUNTRY_IE_VALID(ieee))
Dot11d_UpdateCountryIe(ieee, addr2, info_element->len, info_element->data);
- }
}
//
@@ -888,10 +854,8 @@
// some AP (e.g. Cisco 1242) don't include country IE in their
// probe response frame.
//
- if(IS_EQUAL_CIE_SRC(ieee, addr2) )
- {
+ if (IS_EQUAL_CIE_SRC(ieee, addr2))
UPDATE_CIE_WATCHDOG(ieee);
- }
}
}
@@ -920,10 +884,10 @@
char *p;
#endif
struct ieee80211_info_element *info_element;
- u16 left;
+ u16 left;
u8 i;
short offset;
- u8 curRate = 0,hOpRate = 0,curRate_ex = 0;
+ u8 curRate = 0, hOpRate = 0, curRate_ex = 0;
/* Pull out fixed field data */
memcpy(network->bssid, beacon->header.addr3, ETH_ALEN);
@@ -953,10 +917,10 @@
} else
network->flags |= NETWORK_HAS_CCK;
- network->wpa_ie_len = 0;
- network->rsn_ie_len = 0;
+ network->wpa_ie_len = 0;
+ network->rsn_ie_len = 0;
- info_element = &beacon->info_element;
+ info_element = &beacon->info_element;
left = stats->len - ((void *)info_element - (void *)beacon);
while (left >= sizeof(struct ieee80211_info_element_hdr)) {
if (sizeof(struct ieee80211_info_element_hdr) + info_element->len > left) {
@@ -964,7 +928,7 @@
info_element->len + sizeof(struct ieee80211_info_element),
left);
return 1;
- }
+ }
switch (info_element->id) {
case MFIE_TYPE_SSID:
@@ -977,8 +941,8 @@
network->ssid_len = min(info_element->len,
(u8)IW_ESSID_MAX_SIZE);
memcpy(network->ssid, info_element->data, network->ssid_len);
- if (network->ssid_len < IW_ESSID_MAX_SIZE)
- memset(network->ssid + network->ssid_len, 0,
+ if (network->ssid_len < IW_ESSID_MAX_SIZE)
+ memset(network->ssid + network->ssid_len, 0,
IW_ESSID_MAX_SIZE - network->ssid_len);
IEEE80211_DEBUG_SCAN("MFIE_TYPE_SSID: '%s' len=%d.\n",
@@ -993,7 +957,7 @@
for (i = 0; i < network->rates_len; i++) {
network->rates[i] = info_element->data[i];
curRate = network->rates[i] & 0x7f;
- if( hOpRate < curRate )
+ if (hOpRate < curRate)
hOpRate = curRate;
#ifdef CONFIG_IEEE80211_DEBUG
p += snprintf(p, sizeof(rates_str) - (p - rates_str), "%02X ", network->rates[i]);
@@ -1019,7 +983,7 @@
for (i = 0; i < network->rates_ex_len; i++) {
network->rates_ex[i] = info_element->data[i];
curRate_ex = network->rates_ex[i] & 0x7f;
- if( hOpRate < curRate_ex )
+ if (hOpRate < curRate_ex)
hOpRate = curRate_ex;
#ifdef CONFIG_IEEE80211_DEBUG
p += snprintf(p, sizeof(rates_str) - (p - rates_str), "%02X ", network->rates[i]);
@@ -1038,14 +1002,14 @@
break;
case MFIE_TYPE_DS_SET:
- IEEE80211_DEBUG_SCAN("MFIE_TYPE_DS_SET: %d\n",
+ IEEE80211_DEBUG_SCAN("MFIE_TYPE_DS_SET: %d\n",
info_element->data[0]);
if (stats->freq == IEEE80211_24GHZ_BAND)
network->channel = info_element->data[0];
break;
- case MFIE_TYPE_FH_SET:
- IEEE80211_DEBUG_SCAN("MFIE_TYPE_FH_SET: ignored\n");
+ case MFIE_TYPE_FH_SET:
+ IEEE80211_DEBUG_SCAN("MFIE_TYPE_FH_SET: ignored\n");
break;
case MFIE_TYPE_CF_SET:
@@ -1054,12 +1018,12 @@
case MFIE_TYPE_TIM:
- if(info_element->len < 4)
+ if (info_element->len < 4)
break;
network->dtim_period = info_element->data[1];
- if(ieee->state != IEEE80211_LINKED)
+ if (ieee->state != IEEE80211_LINKED)
break;
network->last_dtim_sta_time[0] = jiffies;
@@ -1067,10 +1031,10 @@
network->dtim_data = IEEE80211_DTIM_VALID;
- if(info_element->data[0] != 0)
+ if (info_element->data[0] != 0)
break;
- if(info_element->data[2] & 1)
+ if (info_element->data[2] & 1)
network->dtim_data |= IEEE80211_DTIM_MBCAST;
offset = (info_element->data[2] >> 1)*2;
@@ -1078,8 +1042,8 @@
//printk("offset1:%x aid:%x\n",offset, ieee->assoc_id);
/* add and modified for ps 2008.1.22 */
- if(ieee->assoc_id < 8*offset ||
- ieee->assoc_id > 8*(offset + info_element->len -3)) {
+ if (ieee->assoc_id < 8*offset ||
+ ieee->assoc_id > 8*(offset + info_element->len - 3)) {
break;
}
@@ -1089,9 +1053,9 @@
// info_element->data[3+offset] ,
// info_element->data[3+offset] & (1<<(ieee->assoc_id%8)));
- if(info_element->data[3+offset] & (1<<(ieee->assoc_id%8))) {
+ if (info_element->data[3+offset] & (1<<(ieee->assoc_id%8)))
network->dtim_data |= IEEE80211_DTIM_UCAST;
- }
+
break;
case MFIE_TYPE_IBSS_SET:
@@ -1125,9 +1089,8 @@
info_element->data[4] == 0x02) {
network->Turbo_Enable = 1;
}
- if (1 == stats->nic_type) {//nic 87
+ if (1 == stats->nic_type) //nic 87
break;
- }
if (info_element->len >= 5 &&
info_element->data[0] == 0x00 &&
@@ -1152,7 +1115,7 @@
//printk(KERN_WARNING "wmm info¶m updated: %x\n", info_element->data[6]);
network->wmm_info = info_element->data[6];
//WMM Parameter Element
- memcpy(network->wmm_param, (u8 *)(info_element->data + 8),(info_element->len - 8));
+ memcpy(network->wmm_param, (u8 *)(info_element->data + 8), (info_element->len - 8));
network->QoS_Enable = 1;
}
break;
@@ -1174,14 +1137,14 @@
default:
IEEE80211_DEBUG_SCAN("unsupported IE %d\n",
info_element->id);
- break;
- }
+ break;
+ }
left -= sizeof(struct ieee80211_info_element_hdr) +
info_element->len;
info_element = (struct ieee80211_info_element *)
- &info_element->data[info_element->len];
- }
+ &info_element->data[info_element->len];
+ }
//by amy 080312
network->HighestOperaRate = hOpRate;
//by amy 080312
@@ -1217,7 +1180,7 @@
static inline int is_same_network(struct ieee80211_network *src,
struct ieee80211_network *dst,
- struct ieee80211_device * ieee)
+ struct ieee80211_device *ieee)
{
/* A network is only a duplicate if the channel, BSSID, ESSID
* and the capability field (in particular IBSS and BSS) all match.
@@ -1241,12 +1204,11 @@
unsigned char quality = src->stats.signalstrength;
unsigned char signal = 0;
unsigned char noise = 0;
- if(dst->stats.signalstrength > 0) {
- quality = (dst->stats.signalstrength * 5 + src->stats.signalstrength + 5)/6;
- }
+ if (dst->stats.signalstrength > 0)
+ quality = (dst->stats.signalstrength * 5 + src->stats.signalstrength + 5)/6;
signal = ieee80211_TranslateToDbm(quality);
//noise = signal - src->stats.noise;
- if(dst->stats.noise > 0)
+ if (dst->stats.noise > 0)
noise = (dst->stats.noise * 5 + src->stats.noise)/6;
//if(strcmp(dst->ssid, "linksys_lzm000") == 0)
// printk("ssid:%s, quality:%d, signal:%d\n", dst->ssid, quality, signal);
@@ -1262,12 +1224,11 @@
dst->rates_len = src->rates_len;
memcpy(dst->rates_ex, src->rates_ex, src->rates_ex_len);
dst->rates_ex_len = src->rates_ex_len;
- dst->HighestOperaRate= src->HighestOperaRate;
+ dst->HighestOperaRate = src->HighestOperaRate;
//printk("==========>in %s: src->ssid is %s,chan is %d\n",__func__,src->ssid,src->channel);
//YJ,add,080819,for hidden ap
- if(src->ssid_len > 0)
- {
+ if (src->ssid_len > 0) {
//if(src->ssid_len == 13)
// printk("=====================>>>>>>>> Dst ssid: %s Src ssid: %s\n", dst->ssid, src->ssid);
memset(dst->ssid, 0, dst->ssid_len);
@@ -1305,11 +1266,11 @@
memcpy(dst->wmm_param, src->wmm_param, IEEE80211_AC_PRAM_LEN);
}
*/
- if(src->wmm_param[0].ac_aci_acm_aifsn|| \
- src->wmm_param[1].ac_aci_acm_aifsn|| \
- src->wmm_param[2].ac_aci_acm_aifsn|| \
+ if (src->wmm_param[0].ac_aci_acm_aifsn || \
+ src->wmm_param[1].ac_aci_acm_aifsn || \
+ src->wmm_param[2].ac_aci_acm_aifsn || \
src->wmm_param[3].ac_aci_acm_aifsn) {
- memcpy(dst->wmm_param, src->wmm_param, WME_AC_PRAM_LEN);
+ memcpy(dst->wmm_param, src->wmm_param, WME_AC_PRAM_LEN);
}
dst->QoS_Enable = src->QoS_Enable;
#else
@@ -1336,7 +1297,7 @@
unsigned long flags;
short renew;
u8 wmm_info;
- u8 is_beacon = (WLAN_FC_GET_STYPE(beacon->header.frame_ctl) == IEEE80211_STYPE_BEACON)? 1:0; //YJ,add,080819,for hidden ap
+ u8 is_beacon = (WLAN_FC_GET_STYPE(beacon->header.frame_ctl) == IEEE80211_STYPE_BEACON) ? 1 : 0; //YJ,add,080819,for hidden ap
memset(&network, 0, sizeof(struct ieee80211_network));
@@ -1378,48 +1339,36 @@
// (2) If there is no any country code in beacon,
// then wireless adapter should do active scan from ch1~11 and
// passive scan from ch12~14
- if(ieee->bGlobalDomain)
- {
- if (WLAN_FC_GET_STYPE(beacon->header.frame_ctl) == IEEE80211_STYPE_PROBE_RESP)
- {
+ if (ieee->bGlobalDomain) {
+ if (WLAN_FC_GET_STYPE(beacon->header.frame_ctl) == IEEE80211_STYPE_PROBE_RESP) {
// Case 1: Country code
- if(IS_COUNTRY_IE_VALID(ieee) )
- {
- if( !IsLegalChannel(ieee, network.channel) )
- {
+ if (IS_COUNTRY_IE_VALID(ieee)) {
+ if (!IsLegalChannel(ieee, network.channel)) {
printk("GetScanInfo(): For Country code, filter probe response at channel(%d).\n", network.channel);
return;
}
}
// Case 2: No any country code.
- else
- {
+ else {
// Filter over channel ch12~14
- if(network.channel > 11)
- {
+ if (network.channel > 11) {
printk("GetScanInfo(): For Global Domain, filter probe response at channel(%d).\n", network.channel);
return;
}
}
- }
- else
- {
+ } else {
// Case 1: Country code
- if(IS_COUNTRY_IE_VALID(ieee) )
- {
- if( !IsLegalChannel(ieee, network.channel) )
- {
- printk("GetScanInfo(): For Country code, filter beacon at channel(%d).\n",network.channel);
+ if (IS_COUNTRY_IE_VALID(ieee)) {
+ if (!IsLegalChannel(ieee, network.channel)) {
+ printk("GetScanInfo(): For Country code, filter beacon at channel(%d).\n", network.channel);
return;
}
}
// Case 2: No any country code.
- else
- {
+ else {
// Filter over channel ch12~14
- if(network.channel > 14)
- {
- printk("GetScanInfo(): For Global Domain, filter beacon at channel(%d).\n",network.channel);
+ if (network.channel > 14) {
+ printk("GetScanInfo(): For Global Domain, filter beacon at channel(%d).\n", network.channel);
return;
}
}
@@ -1437,12 +1386,12 @@
spin_lock_irqsave(&ieee->lock, flags);
- if(is_same_network(&ieee->current_network, &network, ieee)) {
+ if (is_same_network(&ieee->current_network, &network, ieee)) {
wmm_info = ieee->current_network.wmm_info;
//YJ,add,080819,for hidden ap
- if(is_beacon == 0)
+ if (is_beacon == 0)
network.flags = (~NETWORK_EMPTY_ESSID & network.flags)|(NETWORK_EMPTY_ESSID & ieee->current_network.flags);
- else if(ieee->state == IEEE80211_LINKED)
+ else if (ieee->state == IEEE80211_LINKED)
ieee->NumRxBcnInPeriod++;
//YJ,add,080819,for hidden ap,end
//printk("====>network.ssid=%s cur_ssid=%s\n", network.ssid, ieee->current_network.ssid);
@@ -1504,13 +1453,13 @@
*/
renew = !time_after(target->last_scanned + ieee->scan_age, jiffies);
//YJ,add,080819,for hidden ap
- if(is_beacon == 0)
+ if (is_beacon == 0)
network.flags = (~NETWORK_EMPTY_ESSID & network.flags)|(NETWORK_EMPTY_ESSID & target->flags);
//if(strncmp(network.ssid, "linksys-c",9) == 0)
// printk("====>2 network.ssid=%s FLAG=%d target.ssid=%s FLAG=%d\n", network.ssid, network.flags, target->ssid, target->flags);
- if(((network.flags & NETWORK_EMPTY_ESSID) == NETWORK_EMPTY_ESSID) \
+ if (((network.flags & NETWORK_EMPTY_ESSID) == NETWORK_EMPTY_ESSID) \
&& (((network.ssid_len > 0) && (strncmp(target->ssid, network.ssid, network.ssid_len)))\
- ||((ieee->current_network.ssid_len == network.ssid_len)&&(strncmp(ieee->current_network.ssid, network.ssid, network.ssid_len) == 0)&&(ieee->state == IEEE80211_NOLINK))))
+ || ((ieee->current_network.ssid_len == network.ssid_len) && (strncmp(ieee->current_network.ssid, network.ssid, network.ssid_len) == 0) && (ieee->state == IEEE80211_NOLINK))))
renew = 1;
//YJ,add,080819,for hidden ap,end
update_network(target, &network);
diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac_wx.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac_wx.c
index 1ef8fd6..d9add53 100644
--- a/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac_wx.c
+++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac_wx.c
@@ -32,11 +32,11 @@
union iwreq_data *wrqu, char *b)
{
int ret;
- struct iw_freq *fwrq = & wrqu->freq;
+ struct iw_freq *fwrq = &wrqu->freq;
// printk("in %s\n",__func__);
down(&ieee->wx_sem);
- if(ieee->iw_mode == IW_MODE_INFRA){
+ if (ieee->iw_mode == IW_MODE_INFRA) {
ret = -EOPNOTSUPP;
goto out;
}
@@ -57,21 +57,20 @@
}
}
- if (fwrq->e > 0 || fwrq->m > 14 || fwrq->m < 1 ){
+ if (fwrq->e > 0 || fwrq->m > 14 || fwrq->m < 1) {
ret = -EOPNOTSUPP;
goto out;
- }else { /* Set the channel */
+ } else { /* Set the channel */
ieee->current_network.channel = fwrq->m;
ieee->set_chan(ieee->dev, ieee->current_network.channel);
- if(ieee->iw_mode == IW_MODE_ADHOC || ieee->iw_mode == IW_MODE_MASTER)
- if(ieee->state == IEEE80211_LINKED){
-
- ieee80211_stop_send_beacons(ieee);
- ieee80211_start_send_beacons(ieee);
+ if (ieee->iw_mode == IW_MODE_ADHOC || ieee->iw_mode == IW_MODE_MASTER)
+ if (ieee->state == IEEE80211_LINKED) {
+ ieee80211_stop_send_beacons(ieee);
+ ieee80211_start_send_beacons(ieee);
}
}
@@ -86,7 +85,7 @@
struct iw_request_info *a,
union iwreq_data *wrqu, char *b)
{
- struct iw_freq *fwrq = & wrqu->freq;
+ struct iw_freq *fwrq = &wrqu->freq;
if (ieee->current_network.channel == 0)
return -1;
@@ -143,12 +142,12 @@
down(&ieee->wx_sem);
/* use ifconfig hw ether */
- if (ieee->iw_mode == IW_MODE_MASTER){
+ if (ieee->iw_mode == IW_MODE_MASTER) {
ret = -1;
goto out;
}
- if (temp->sa_family != ARPHRD_ETHER){
+ if (temp->sa_family != ARPHRD_ETHER) {
ret = -EINVAL;
goto out;
}
@@ -175,9 +174,10 @@
return ret;
}
- int ieee80211_wx_get_essid(struct ieee80211_device *ieee, struct iw_request_info *a,union iwreq_data *wrqu,char *b)
+int ieee80211_wx_get_essid(struct ieee80211_device *ieee, struct iw_request_info *a,
+ union iwreq_data *wrqu, char *b)
{
- int len,ret = 0;
+ int len, ret = 0;
unsigned long flags;
if (ieee->iw_mode == IW_MODE_MONITOR)
@@ -200,7 +200,7 @@
}
len = ieee->current_network.ssid_len;
wrqu->essid.length = len;
- strncpy(b,ieee->current_network.ssid,len);
+ strncpy(b, ieee->current_network.ssid, len);
wrqu->essid.flags = 1;
out:
@@ -218,11 +218,11 @@
u32 target_rate = wrqu->bitrate.value;
//added by lizhaoming for auto mode
- if(target_rate == -1){
- ieee->rate = 110;
- } else {
- ieee->rate = target_rate/100000;
- }
+ if (target_rate == -1)
+ ieee->rate = 110;
+ else
+ ieee->rate = target_rate/100000;
+
//FIXME: we might want to limit rate also in management protocols.
return 0;
}
@@ -250,16 +250,14 @@
if (wrqu->mode == ieee->iw_mode)
goto out;
- if (wrqu->mode == IW_MODE_MONITOR){
-
+ if (wrqu->mode == IW_MODE_MONITOR)
ieee->dev->type = ARPHRD_IEEE80211;
- }else{
+ else
ieee->dev->type = ARPHRD_ETHER;
- }
- if (!ieee->proto_started){
+ if (!ieee->proto_started) {
ieee->iw_mode = wrqu->mode;
- }else{
+ } else {
ieee80211_stop_protocol(ieee);
ieee->iw_mode = wrqu->mode;
ieee80211_start_protocol(ieee);
@@ -296,7 +294,7 @@
if (ieee->data_hard_resume)
ieee->data_hard_resume(ieee->dev);
- if(ieee->iw_mode == IW_MODE_ADHOC || ieee->iw_mode == IW_MODE_MASTER)
+ if (ieee->iw_mode == IW_MODE_ADHOC || ieee->iw_mode == IW_MODE_MASTER)
ieee80211_start_send_beacons(ieee);
//YJ,add,080828, In prevent of lossing ping packet during scanning
@@ -314,7 +312,7 @@
down(&ieee->wx_sem);
- if (ieee->iw_mode == IW_MODE_MONITOR || !(ieee->proto_started)){
+ if (ieee->iw_mode == IW_MODE_MONITOR || !(ieee->proto_started)) {
ret = -1;
goto out;
}
@@ -323,7 +321,7 @@
//ieee80211_sta_ps_send_null_frame(ieee, true);
//YJ,add,080828,end
- if ( ieee->state == IEEE80211_LINKED){
+ if (ieee->state == IEEE80211_LINKED) {
queue_work(ieee->wq, &ieee->wx_sync_scan_wq);
/* intentionally forget to up sem */
return 0;
@@ -339,7 +337,7 @@
union iwreq_data *wrqu, char *extra)
{
- int ret=0,len;
+ int ret = 0, len;
short proto_started;
unsigned long flags;
@@ -349,17 +347,17 @@
proto_started = ieee->proto_started;
- if (wrqu->essid.length > IW_ESSID_MAX_SIZE){
- ret= -E2BIG;
+ if (wrqu->essid.length > IW_ESSID_MAX_SIZE) {
+ ret = -E2BIG;
goto out;
}
- if (ieee->iw_mode == IW_MODE_MONITOR){
- ret= -1;
+ if (ieee->iw_mode == IW_MODE_MONITOR) {
+ ret = -1;
goto out;
}
- if(proto_started)
+ if (proto_started)
ieee80211_stop_protocol(ieee);
/* this is just to be sure that the GET wx callback
@@ -377,13 +375,12 @@
//YJ,modified,080819,end
//YJ,add,080819,for hidden ap
- if(len == 0){
+ if (len == 0) {
memset(ieee->current_network.bssid, 0, ETH_ALEN);
ieee->current_network.capability = 0;
}
//YJ,add,080819,for hidden ap,end
- }
- else{
+ } else {
ieee->ssid_set = 0;
ieee->current_network.ssid[0] = '\0';
ieee->current_network.ssid_len = 0;
@@ -398,7 +395,7 @@
return ret;
}
- int ieee80211_wx_get_mode(struct ieee80211_device *ieee, struct iw_request_info *a,
+int ieee80211_wx_get_mode(struct ieee80211_device *ieee, struct iw_request_info *a,
union iwreq_data *wrqu, char *b)
{
@@ -406,7 +403,7 @@
return 0;
}
- int ieee80211_wx_set_rawtx(struct ieee80211_device *ieee,
+int ieee80211_wx_set_rawtx(struct ieee80211_device *ieee,
struct iw_request_info *info,
union iwreq_data *wrqu, char *extra)
{
@@ -417,24 +414,23 @@
down(&ieee->wx_sem);
- if(enable)
+ if (enable)
ieee->raw_tx = 1;
else
ieee->raw_tx = 0;
- printk(KERN_INFO"raw TX is %s\n",
- ieee->raw_tx ? "enabled" : "disabled");
+ netdev_info(ieee->dev, "raw TX is %s\n",
+ ieee->raw_tx ? "enabled" : "disabled");
- if(ieee->iw_mode == IW_MODE_MONITOR)
- {
- if(prev == 0 && ieee->raw_tx){
+ if (ieee->iw_mode == IW_MODE_MONITOR) {
+ if (prev == 0 && ieee->raw_tx) {
if (ieee->data_hard_resume)
ieee->data_hard_resume(ieee->dev);
netif_carrier_on(ieee->dev);
}
- if(prev && ieee->raw_tx == 1)
+ if (prev && ieee->raw_tx == 1)
netif_carrier_off(ieee->dev);
}
@@ -448,18 +444,18 @@
union iwreq_data *wrqu, char *extra)
{
strlcpy(wrqu->name, "802.11", IFNAMSIZ);
- if(ieee->modulation & IEEE80211_CCK_MODULATION){
+ if (ieee->modulation & IEEE80211_CCK_MODULATION) {
strlcat(wrqu->name, "b", IFNAMSIZ);
- if(ieee->modulation & IEEE80211_OFDM_MODULATION)
+ if (ieee->modulation & IEEE80211_OFDM_MODULATION)
strlcat(wrqu->name, "/g", IFNAMSIZ);
- }else if(ieee->modulation & IEEE80211_OFDM_MODULATION)
+ } else if (ieee->modulation & IEEE80211_OFDM_MODULATION)
strlcat(wrqu->name, "g", IFNAMSIZ);
- if((ieee->state == IEEE80211_LINKED) ||
+ if ((ieee->state == IEEE80211_LINKED) ||
(ieee->state == IEEE80211_LINKED_SCANNING))
- strlcat(wrqu->name," link", IFNAMSIZ);
- else if(ieee->state != IEEE80211_NOLINK)
- strlcat(wrqu->name," .....", IFNAMSIZ);
+ strlcat(wrqu->name, " link", IFNAMSIZ);
+ else if (ieee->state != IEEE80211_NOLINK)
+ strlcat(wrqu->name, " .....", IFNAMSIZ);
return 0;
@@ -473,11 +469,10 @@
{
int ret = 0;
- if(
- (!ieee->sta_wake_up) ||
- (!ieee->ps_request_tx_ack) ||
- (!ieee->enter_sleep_state) ||
- (!ieee->ps_is_queue_empty)){
+ if ((!ieee->sta_wake_up) ||
+ (!ieee->ps_request_tx_ack) ||
+ (!ieee->enter_sleep_state) ||
+ (!ieee->ps_is_queue_empty)) {
printk("ERROR. PS mode tried to be use but driver missed a callback\n\n");
@@ -486,7 +481,7 @@
down(&ieee->wx_sem);
- if (wrqu->power.disabled){
+ if (wrqu->power.disabled) {
ieee->ps = IEEE80211_PS_DISABLED;
goto exit;
@@ -512,7 +507,7 @@
if (wrqu->power.flags & IW_POWER_TIMEOUT) {
ieee->ps_timeout = wrqu->power.value / 1000;
- printk("Timeout %d\n",ieee->ps_timeout);
+ printk("Timeout %d\n", ieee->ps_timeout);
}
if (wrqu->power.flags & IW_POWER_PERIOD) {
@@ -533,11 +528,11 @@
struct iw_request_info *info,
union iwreq_data *wrqu, char *extra)
{
- int ret =0;
+ int ret = 0;
down(&ieee->wx_sem);
- if(ieee->ps == IEEE80211_PS_DISABLED){
+ if (ieee->ps == IEEE80211_PS_DISABLED) {
wrqu->power.disabled = 1;
goto exit;
}
diff --git a/drivers/staging/rtl8187se/r8180.h b/drivers/staging/rtl8187se/r8180.h
index 2682afb..70ea414 100644
--- a/drivers/staging/rtl8187se/r8180.h
+++ b/drivers/staging/rtl8187se/r8180.h
@@ -327,12 +327,8 @@
int irq;
struct ieee80211_device *ieee80211;
- short phy_ver; /* meaningful for rtl8225 1:A 2:B 3:C */
- short enable_gpio0;
- short hw_plcp_len;
short plcp_preamble_mode; // 0:auto 1:short 2:long
- spinlock_t irq_lock;
spinlock_t irq_th_lock;
spinlock_t tx_lock;
spinlock_t ps_lock;
@@ -350,7 +346,6 @@
u8 channel_plan; // it's the channel plan index
short up;
short crcmon; //if 1 allow bad crc frame reception in monitor mode
- short prism_hdr;
struct timer_list scan_timer;
/*short scanpending;
@@ -359,14 +354,11 @@
u8 active_probe;
//u8 active_scan_num;
struct semaphore wx_sem;
- struct semaphore rf_state;
short hw_wep;
short digphy;
short antb;
short diversity;
- u8 cs_treshold;
- short rcr_csense;
u32 key0[4];
short (*rf_set_sens)(struct net_device *dev,short sens);
void (*rf_set_chan)(struct net_device *dev,short ch);
@@ -491,7 +483,6 @@
RT_RF_POWER_STATE eRFPowerState;
u32 RfOffReason;
bool RFChangeInProgress;
- bool bInHctTest;
bool SetRFPowerStateInProgress;
u8 RFProgType;
bool bLeisurePs;
@@ -618,17 +609,11 @@
// struct workqueue_struct *workqueue;
struct work_struct reset_wq;
struct work_struct watch_dog_wq;
- struct work_struct tx_irq_wq;
short ack_tx_to_ieee;
- u8 PowerProfile;
- u32 CSMethod;
- u8 cck_txpwr_base;
- u8 ofdm_txpwr_base;
u8 dma_poll_stop_mask;
//u8 RegThreeWireMode;
- u8 MWIEnable;
u16 ShortRetryLimit;
u16 LongRetryLimit;
u16 EarlyRxThreshold;
@@ -667,35 +652,22 @@
void force_pci_posting(struct net_device *dev);
void rtl8180_rtx_disable(struct net_device *);
-void rtl8180_rx_enable(struct net_device *);
-void rtl8180_tx_enable(struct net_device *);
-void rtl8180_start_scanning(struct net_device *dev);
-void rtl8180_start_scanning_s(struct net_device *dev);
-void rtl8180_stop_scanning(struct net_device *dev);
-void rtl8180_disassociate(struct net_device *dev);
-//void fix_rx_fifo(struct net_device *dev);
void rtl8180_set_anaparam(struct net_device *dev,u32 a);
void rtl8185_set_anaparam2(struct net_device *dev,u32 a);
void rtl8180_set_hw_wep(struct net_device *dev);
void rtl8180_no_hw_wep(struct net_device *dev);
void rtl8180_update_msr(struct net_device *dev);
-//void rtl8180_BSS_create(struct net_device *dev);
void rtl8180_beacon_tx_disable(struct net_device *dev);
void rtl8180_beacon_rx_disable(struct net_device *dev);
-void rtl8180_conttx_enable(struct net_device *dev);
-void rtl8180_conttx_disable(struct net_device *dev);
int rtl8180_down(struct net_device *dev);
int rtl8180_up(struct net_device *dev);
void rtl8180_commit(struct net_device *dev);
void rtl8180_set_chan(struct net_device *dev,short ch);
-void rtl8180_set_master_essid(struct net_device *dev,char *essid);
-void rtl8180_update_beacon_security(struct net_device *dev);
void write_phy(struct net_device *dev, u8 adr, u8 data);
void write_phy_cck(struct net_device *dev, u8 adr, u32 data);
void write_phy_ofdm(struct net_device *dev, u8 adr, u32 data);
void rtl8185_tx_antenna(struct net_device *dev, u8 ant);
void rtl8185_rf_pins_enable(struct net_device *dev);
-void IBSS_randomize_cell(struct net_device *dev);
void IPSEnter(struct net_device *dev);
void IPSLeave(struct net_device *dev);
int get_curr_tx_free_desc(struct net_device *dev, int priority);
diff --git a/drivers/staging/rtl8187se/r8180_core.c b/drivers/staging/rtl8187se/r8180_core.c
index 20e5fb5..ae38475 100644
--- a/drivers/staging/rtl8187se/r8180_core.c
+++ b/drivers/staging/rtl8187se/r8180_core.c
@@ -27,6 +27,8 @@
Written by Mariusz Matuszek.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#undef RX_DONT_PASS_UL
#undef DUMMY_RX
@@ -44,7 +46,7 @@
#include "ieee80211/dot11d.h"
-static struct pci_device_id rtl8180_pci_id_tbl[] __devinitdata = {
+static struct pci_device_id rtl8180_pci_id_tbl[] = {
{
.vendor = PCI_VENDOR_ID_REALTEK,
.device = 0x8199,
@@ -61,33 +63,23 @@
}
};
-
static char ifname[IFNAMSIZ] = "wlan%d";
-static int hwseqnum = 0;
-static int hwwep = 0;
-static int channels = 0x3fff;
+static int hwwep;
MODULE_LICENSE("GPL");
MODULE_DEVICE_TABLE(pci, rtl8180_pci_id_tbl);
MODULE_AUTHOR("Andrea Merello <andreamrl@tiscali.it>");
-MODULE_DESCRIPTION("Linux driver for Realtek RTL8180 / RTL8185 WiFi cards");
-
+MODULE_DESCRIPTION("Linux driver for Realtek RTL8187SE WiFi cards");
module_param_string(ifname, ifname, sizeof(ifname), S_IRUGO|S_IWUSR);
-module_param(hwseqnum, int, S_IRUGO|S_IWUSR);
module_param(hwwep, int, S_IRUGO|S_IWUSR);
-module_param(channels, int, S_IRUGO|S_IWUSR);
-MODULE_PARM_DESC(devname, " Net interface name, wlan%d=default");
-MODULE_PARM_DESC(hwseqnum, " Try to use hardware 802.11 header sequence numbers. Zero=default");
MODULE_PARM_DESC(hwwep, " Try to use hardware WEP support. Still broken and not available on all cards");
-MODULE_PARM_DESC(channels, " Channel bitmask for specific locales. NYI");
-
-static int __devinit rtl8180_pci_probe(struct pci_dev *pdev,
+static int rtl8180_pci_probe(struct pci_dev *pdev,
const struct pci_device_id *id);
-static void __devexit rtl8180_pci_remove(struct pci_dev *pdev);
+static void rtl8180_pci_remove(struct pci_dev *pdev);
static void rtl8180_shutdown(struct pci_dev *pdev)
{
@@ -126,8 +118,7 @@
err = pci_enable_device(pdev);
if (err) {
- printk(KERN_ERR "%s: pci_enable_device failed on resume\n",
- dev->name);
+ dev_err(&pdev->dev, "pci_enable_device failed on resume\n");
return err;
}
@@ -159,7 +150,7 @@
.name = RTL8180_MODULE_NAME,
.id_table = rtl8180_pci_id_tbl,
.probe = rtl8180_pci_probe,
- .remove = __devexit_p(rtl8180_pci_remove),
+ .remove = rtl8180_pci_remove,
.suspend = rtl8180_suspend,
.resume = rtl8180_resume,
.shutdown = rtl8180_shutdown,
@@ -211,7 +202,7 @@
void rtl8180_commit(struct net_device *dev);
void rtl8180_start_tx_beacon(struct net_device *dev);
-static struct proc_dir_entry *rtl8180_proc = NULL;
+static struct proc_dir_entry *rtl8180_proc;
static int proc_get_registers(char *page, char **start,
off_t offset, int count,
@@ -323,7 +314,6 @@
remove_proc_entry("stats-tx", priv->dir_dev);
remove_proc_entry("stats-rx", priv->dir_dev);
remove_proc_entry("registers", priv->dir_dev);
- remove_proc_entry(dev->name, rtl8180_proc);
priv->dir_dev = NULL;
}
}
@@ -444,24 +434,6 @@
*buffer = NULL;
}
-void print_buffer(u32 *buffer, int len)
-{
- int i;
- u8 *buf = (u8 *)buffer;
-
- printk("ASCII BUFFER DUMP (len: %x):\n", len);
-
- for (i = 0; i < len; i++)
- printk("%c", buf[i]);
-
- printk("\nBINARY BUFFER DUMP (len: %x):\n", len);
-
- for (i = 0; i < len; i++)
- printk("%02x", buf[i]);
-
- printk("\n");
-}
-
int get_curr_tx_free_desc(struct net_device *dev, int priority)
{
struct r8180_priv *priv = ieee80211_priv(dev);
@@ -635,74 +607,6 @@
set_nic_rxring(dev);
}
-unsigned char QUALITY_MAP[] = {
- 0x64, 0x64, 0x64, 0x63, 0x63, 0x62, 0x62, 0x61,
- 0x61, 0x60, 0x60, 0x5f, 0x5f, 0x5e, 0x5d, 0x5c,
- 0x5b, 0x5a, 0x59, 0x57, 0x56, 0x54, 0x52, 0x4f,
- 0x4c, 0x49, 0x45, 0x41, 0x3c, 0x37, 0x31, 0x29,
- 0x24, 0x22, 0x22, 0x22, 0x22, 0x22, 0x22, 0x22,
- 0x22, 0x22, 0x21, 0x21, 0x21, 0x21, 0x21, 0x20,
- 0x20, 0x20, 0x20, 0x1f, 0x1f, 0x1e, 0x1e, 0x1e,
- 0x1d, 0x1d, 0x1c, 0x1c, 0x1b, 0x1a, 0x19, 0x19,
- 0x18, 0x17, 0x16, 0x15, 0x14, 0x12, 0x11, 0x0f,
- 0x0e, 0x0c, 0x0a, 0x08, 0x06, 0x04, 0x01, 0x00
-};
-
-unsigned char STRENGTH_MAP[] = {
- 0x64, 0x64, 0x63, 0x62, 0x61, 0x60, 0x5f, 0x5e,
- 0x5d, 0x5c, 0x5b, 0x5a, 0x57, 0x54, 0x52, 0x50,
- 0x4e, 0x4c, 0x4a, 0x48, 0x46, 0x44, 0x41, 0x3f,
- 0x3c, 0x3a, 0x37, 0x36, 0x36, 0x1c, 0x1c, 0x1b,
- 0x1b, 0x1a, 0x1a, 0x19, 0x19, 0x18, 0x18, 0x17,
- 0x17, 0x16, 0x16, 0x15, 0x15, 0x14, 0x14, 0x13,
- 0x13, 0x12, 0x12, 0x11, 0x11, 0x10, 0x10, 0x0f,
- 0x0f, 0x0e, 0x0e, 0x0d, 0x0d, 0x0c, 0x0c, 0x0b,
- 0x0b, 0x0a, 0x0a, 0x09, 0x09, 0x08, 0x08, 0x07,
- 0x07, 0x06, 0x06, 0x05, 0x04, 0x03, 0x02, 0x00
-};
-
-void rtl8180_RSSI_calc(struct net_device *dev, u8 *rssi, u8 *qual)
-{
- u32 temp;
- u32 temp2;
- u32 q;
- u32 orig_qual;
- u8 _rssi;
-
- q = *qual;
- orig_qual = *qual;
- _rssi = 0; /* avoid gcc complains.. */
-
- if (q <= 0x4e) {
- temp = QUALITY_MAP[q];
- } else {
- if (q & 0x80)
- temp = 0x32;
- else
- temp = 1;
- }
-
- *qual = temp;
- temp2 = *rssi;
-
- if (_rssi < 0x64) {
- if (_rssi == 0)
- *rssi = 1;
- } else {
- *rssi = 0x64;
- }
-
- return;
-}
-
-void rtl8180_irq_enable(struct net_device *dev)
-{
- struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-
- priv->irq_enabled = 1;
- write_nic_word(dev, INTA_MASK, priv->irq_mask);
-}
-
void rtl8180_irq_disable(struct net_device *dev)
{
struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
@@ -724,7 +628,6 @@
write_nic_byte(dev, EPROM_CMD, ecmd);
}
-void rtl8180_adapter_start(struct net_device *dev);
void rtl8180_beacon_tx_enable(struct net_device *dev);
void rtl8180_update_msr(struct net_device *dev)
@@ -771,57 +674,6 @@
priv->rf_set_chan(dev, priv->chan);
}
-void rtl8180_rx_enable(struct net_device *dev)
-{
- u8 cmd;
- u32 rxconf;
- /* for now we accept data, management & ctl frame*/
- struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-
- rxconf = read_nic_dword(dev, RX_CONF);
- rxconf = rxconf & ~MAC_FILTER_MASK;
- rxconf = rxconf | (1<<ACCEPT_MNG_FRAME_SHIFT);
- rxconf = rxconf | (1<<ACCEPT_DATA_FRAME_SHIFT);
- rxconf = rxconf | (1<<ACCEPT_BCAST_FRAME_SHIFT);
- rxconf = rxconf | (1<<ACCEPT_MCAST_FRAME_SHIFT);
- if (dev->flags & IFF_PROMISC)
- DMESG("NIC in promisc mode");
-
- if (priv->ieee80211->iw_mode == IW_MODE_MONITOR || \
- dev->flags & IFF_PROMISC) {
- rxconf = rxconf | (1<<ACCEPT_ALLMAC_FRAME_SHIFT);
- } else {
- rxconf = rxconf | (1<<ACCEPT_NICMAC_FRAME_SHIFT);
- }
-
- if (priv->ieee80211->iw_mode == IW_MODE_MONITOR) {
- rxconf = rxconf | (1<<ACCEPT_CTL_FRAME_SHIFT);
- rxconf = rxconf | (1<<ACCEPT_ICVERR_FRAME_SHIFT);
- rxconf = rxconf | (1<<ACCEPT_PWR_FRAME_SHIFT);
- }
-
- if (priv->crcmon == 1 && priv->ieee80211->iw_mode == IW_MODE_MONITOR)
- rxconf = rxconf | (1<<ACCEPT_CRCERR_FRAME_SHIFT);
-
- rxconf = rxconf & ~RX_FIFO_THRESHOLD_MASK;
- rxconf = rxconf | (RX_FIFO_THRESHOLD_NONE << RX_FIFO_THRESHOLD_SHIFT);
-
- rxconf = rxconf | (1<<RX_AUTORESETPHY_SHIFT);
- rxconf = rxconf & ~MAX_RX_DMA_MASK;
- rxconf = rxconf | (MAX_RX_DMA_2048<<MAX_RX_DMA_SHIFT);
-
- rxconf = rxconf | RCR_ONLYERLPKT;
-
- rxconf = rxconf & ~RCR_CS_MASK;
-
- write_nic_dword(dev, RX_CONF, rxconf);
-
- fix_rx_fifo(dev);
-
- cmd = read_nic_byte(dev, CMD);
- write_nic_byte(dev, CMD, cmd | (1<<CMD_RX_ENABLE_SHIFT));
-}
-
void set_nic_txring(struct net_device *dev)
{
struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
@@ -835,80 +687,6 @@
write_nic_dword(dev, TX_BEACON_RING_ADDR, priv->txbeaconringdma);
}
-void rtl8180_conttx_enable(struct net_device *dev)
-{
- u32 txconf;
-
- txconf = read_nic_dword(dev, TX_CONF);
- txconf = txconf & ~TX_LOOPBACK_MASK;
- txconf = txconf | (TX_LOOPBACK_CONTINUE<<TX_LOOPBACK_SHIFT);
- write_nic_dword(dev, TX_CONF, txconf);
-}
-
-void rtl8180_conttx_disable(struct net_device *dev)
-{
- u32 txconf;
-
- txconf = read_nic_dword(dev, TX_CONF);
- txconf = txconf & ~TX_LOOPBACK_MASK;
- txconf = txconf | (TX_LOOPBACK_NONE<<TX_LOOPBACK_SHIFT);
- write_nic_dword(dev, TX_CONF, txconf);
-}
-
-void rtl8180_tx_enable(struct net_device *dev)
-{
- u8 cmd;
- u8 tx_agc_ctl;
- u8 byte;
- u32 txconf;
- struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-
- txconf = read_nic_dword(dev, TX_CONF);
-
- byte = read_nic_byte(dev, CW_CONF);
- byte &= ~(1<<CW_CONF_PERPACKET_CW_SHIFT);
- byte &= ~(1<<CW_CONF_PERPACKET_RETRY_SHIFT);
- write_nic_byte(dev, CW_CONF, byte);
-
- tx_agc_ctl = read_nic_byte(dev, TX_AGC_CTL);
- tx_agc_ctl &= ~(1<<TX_AGC_CTL_PERPACKET_GAIN_SHIFT);
- tx_agc_ctl &= ~(1<<TX_AGC_CTL_PERPACKET_ANTSEL_SHIFT);
- tx_agc_ctl |= (1<<TX_AGC_CTL_FEEDBACK_ANT);
- write_nic_byte(dev, TX_AGC_CTL, tx_agc_ctl);
- write_nic_byte(dev, 0xec, 0x3f); /* Disable early TX */
-
- txconf = txconf & ~(1<<TCR_PROBE_NOTIMESTAMP_SHIFT);
-
- txconf = txconf & ~TX_LOOPBACK_MASK;
- txconf = txconf | (TX_LOOPBACK_NONE<<TX_LOOPBACK_SHIFT);
- txconf = txconf & ~TCR_DPRETRY_MASK;
- txconf = txconf & ~TCR_RTSRETRY_MASK;
- txconf = txconf | (priv->retry_data<<TX_DPRETRY_SHIFT);
- txconf = txconf | (priv->retry_rts<<TX_RTSRETRY_SHIFT);
- txconf = txconf & ~(1<<TX_NOCRC_SHIFT);
-
- if (priv->hw_plcp_len)
- txconf = txconf & ~TCR_PLCP_LEN;
- else
- txconf = txconf | TCR_PLCP_LEN;
-
- txconf = txconf & ~TCR_MXDMA_MASK;
- txconf = txconf | (TCR_MXDMA_2048<<TCR_MXDMA_SHIFT);
- txconf = txconf | TCR_CWMIN;
- txconf = txconf | TCR_DISCW;
-
- txconf = txconf | (1 << TX_NOICV_SHIFT);
-
- write_nic_dword(dev, TX_CONF, txconf);
-
- fix_tx_fifo(dev);
-
- cmd = read_nic_byte(dev, CMD);
- write_nic_byte(dev, CMD, cmd | (1<<CMD_TX_ENABLE_SHIFT));
-
- write_nic_dword(dev, TX_CONF, txconf);
-}
-
void rtl8180_beacon_tx_enable(struct net_device *dev)
{
struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
@@ -936,8 +714,8 @@
struct r8180_priv *priv = ieee80211_priv(dev);
cmd = read_nic_byte(dev, CMD);
- write_nic_byte(dev, CMD, cmd & ~\
- ((1<<CMD_RX_ENABLE_SHIFT)|(1<<CMD_TX_ENABLE_SHIFT)));
+ write_nic_byte(dev, CMD, cmd &
+ ~((1<<CMD_RX_ENABLE_SHIFT)|(1<<CMD_TX_ENABLE_SHIFT)));
force_pci_posting(dev);
mdelay(10);
@@ -1481,8 +1259,7 @@
pci_dma_sync_single_for_cpu(priv->pdev,
priv->rxbuffer->dma,
- priv->rxbuffersize * \
- sizeof(u8),
+ priv->rxbuffersize * sizeof(u8),
PCI_DMA_FROMDEVICE);
first = *(priv->rxringtail) & (1<<29) ? 1 : 0;
@@ -1660,14 +1437,9 @@
dev_kfree_skb_any(priv->rx_skb);
priv->stats.rxnolast++;
}
- /* support for prism header has been originally added by Christian */
- if (priv->prism_hdr && priv->ieee80211->iw_mode == IW_MODE_MONITOR) {
-
- } else {
- priv->rx_skb = dev_alloc_skb(len+2);
- if (!priv->rx_skb)
- goto drop;
- }
+ priv->rx_skb = dev_alloc_skb(len+2);
+ if (!priv->rx_skb)
+ goto drop;
priv->rx_skb_complete = 0;
priv->rx_skb->dev = dev;
@@ -1718,8 +1490,7 @@
pci_dma_sync_single_for_device(priv->pdev,
priv->rxbuffer->dma,
- priv->rxbuffersize * \
- sizeof(u8),
+ priv->rxbuffersize * sizeof(u8),
PCI_DMA_FROMDEVICE);
drop: /* this is used when we have not enough mem */
@@ -1929,7 +1700,7 @@
* descriptor in the ring buffer, copyes the frame in a TX buffer
* and kicks the NIC to ensure it does the DMA transfer.
*/
-short rtl8180_tx(struct net_device *dev, u8* txbuf, int len, int priority,
+short rtl8180_tx(struct net_device *dev, u8 *txbuf, int len, int priority,
short morefrag, short descfrag, int rate)
{
struct r8180_priv *priv = ieee80211_priv(dev);
@@ -1940,8 +1711,6 @@
int remain;
int buflen;
int count;
- u16 duration;
- short ext;
struct buffer *buflist;
struct ieee80211_hdr_3addr *frag_hdr = (struct ieee80211_hdr_3addr *)txbuf;
u8 dest[ETH_ALEN];
@@ -2137,15 +1906,6 @@
*tail = *tail | ((rate&0xf) << 24);
- /* hw_plcp_len is not used for rtl8180 chip */
- /* FIXME */
- if (!priv->hw_plcp_len) {
- duration = rtl8180_len2duration(len, rate, &ext);
- *(tail+1) = *(tail+1) | ((duration & 0x7fff)<<16);
- if (ext)
- *(tail+1) = *(tail+1) | (1<<31); /* plcp length extension */
- }
-
if (morefrag)
*tail = (*tail) | (1<<17); /* more fragment */
if (!remain)
@@ -2223,10 +1983,10 @@
write_nic_dword(dev, BSSID, ((u32 *)net->bssid)[0]);
write_nic_word(dev, BSSID+4, ((u16 *)net->bssid)[2]);
- beacon_interval = read_nic_dword(dev, BEACON_INTERVAL);
+ beacon_interval = read_nic_word(dev, BEACON_INTERVAL);
beacon_interval &= ~BEACON_INTERVAL_MASK;
beacon_interval |= net->beacon_interval;
- write_nic_dword(dev, BEACON_INTERVAL, beacon_interval);
+ write_nic_word(dev, BEACON_INTERVAL, beacon_interval);
rtl8180_set_mode(dev, EPROM_CMD_NORMAL);
@@ -2279,8 +2039,6 @@
return 0;
return 1;
}
-/* FIXME FIXME 5msecs is random */
-#define HW_WAKE_DELAY 5
void rtl8180_hw_wakeup(struct net_device *dev)
{
@@ -2397,7 +2155,8 @@
write_nic_dword(dev, AC_VO_PARAM, u4bAcParam);
break;
default:
- printk(KERN_WARNING "SetHwReg8185():invalid ACI: %d!\n", eACI);
+ pr_warn("SetHwReg8185():invalid ACI: %d!\n",
+ eACI);
break;
}
}
@@ -2436,7 +2195,8 @@
write_nic_dword(dev, AC_VO_PARAM, u4bAcParam);
break;
default:
- printk(KERN_WARNING "SetHwReg8185(): invalid ACI: %d !\n", eACI);
+ pr_warn("SetHwReg8185(): invalid ACI: %d !\n",
+ eACI);
break;
}
}
@@ -2444,7 +2204,6 @@
}
}
-void rtl8180_tx_irq_wq(struct work_struct *work);
void rtl8180_restart_wq(struct work_struct *work);
/* void rtl8180_rq_tx_ack(struct work_struct *work); */
void rtl8180_watch_dog_wq(struct work_struct *work);
@@ -2455,7 +2214,7 @@
void watch_dog_adaptive(unsigned long data)
{
- struct r8180_priv* priv = ieee80211_priv((struct net_device *)data);
+ struct r8180_priv *priv = ieee80211_priv((struct net_device *)data);
if (!priv->up) {
DMESG("<----watch_dog_adaptive():driver is not up!\n");
@@ -2601,8 +2360,7 @@
{
struct r8180_priv *priv = ieee80211_priv(dev);
u16 word;
- u16 version;
- u32 usValue;
+ u16 usValue;
u16 tmpu16;
int i, j;
struct eeprom_93cx6 eeprom;
@@ -2634,7 +2392,6 @@
priv->RFChangeInProgress = false;
priv->SetRFPowerStateInProgress = false;
priv->RFProgType = 0;
- priv->bInHctTest = false;
priv->irq_enabled = 0;
@@ -2658,14 +2415,12 @@
priv->ieee80211->ps_is_queue_empty = rtl8180_is_tx_queue_empty;
priv->hw_wep = hwwep;
- priv->prism_hdr = 0;
priv->dev = dev;
priv->retry_rts = DEFAULT_RETRY_RTS;
priv->retry_data = DEFAULT_RETRY_DATA;
priv->RFChangeInProgress = false;
priv->SetRFPowerStateInProgress = false;
priv->RFProgType = 0;
- priv->bInHctTest = false;
priv->bInactivePs = true; /* false; */
priv->ieee80211->bInactivePs = priv->bInactivePs;
priv->bSwRfProcessing = false;
@@ -2726,7 +2481,6 @@
priv->NumTxOkTotal = 0;
priv->NumTxUnicast = 0;
priv->keepAliveLevel = DEFAULT_KEEP_ALIVE_LEVEL;
- priv->PowerProfile = POWER_PROFILE_AC;
priv->CurrRetryCnt = 0;
priv->LastRetryCnt = 0;
priv->LastTxokCnt = 0;
@@ -2748,15 +2502,12 @@
priv->RegBModeGainStage = 1;
priv->promisc = (dev->flags & IFF_PROMISC) ? 1 : 0;
- spin_lock_init(&priv->irq_lock);
spin_lock_init(&priv->irq_th_lock);
spin_lock_init(&priv->tx_lock);
spin_lock_init(&priv->ps_lock);
spin_lock_init(&priv->rf_ps_lock);
sema_init(&priv->wx_sem, 1);
- sema_init(&priv->rf_state, 1);
INIT_WORK(&priv->reset_wq, (void *)rtl8180_restart_wq);
- INIT_WORK(&priv->tx_irq_wq, (void *)rtl8180_tx_irq_wq);
INIT_DELAYED_WORK(&priv->ieee80211->hw_wakeup_wq,
(void *)rtl8180_hw_wakeup_wq);
INIT_DELAYED_WORK(&priv->ieee80211->hw_sleep_wq,
@@ -2798,19 +2549,14 @@
priv->ieee80211->stop_send_beacons = rtl8180_beacon_tx_disable;
priv->ieee80211->fts = DEFAULT_FRAG_THRESHOLD;
- priv->MWIEnable = 0;
-
priv->ShortRetryLimit = 7;
priv->LongRetryLimit = 7;
priv->EarlyRxThreshold = 7;
- priv->CSMethod = (0x01 << 29);
-
- priv->TransmitConfig = TCR_DurProcMode_OFFSET |
+ priv->TransmitConfig = (1<<TCR_DurProcMode_OFFSET) |
(7<<TCR_MXDMA_OFFSET) |
(priv->ShortRetryLimit<<TCR_SRL_OFFSET) |
- (priv->LongRetryLimit<<TCR_LRL_OFFSET) |
- (0 ? TCR_SAT : 0);
+ (priv->LongRetryLimit<<TCR_LRL_OFFSET);
priv->ReceiveConfig = RCR_AMF | RCR_ADF | RCR_ACF |
RCR_AB | RCR_AM | RCR_APM |
@@ -2832,47 +2578,35 @@
priv->InitialGain = 6;
DMESG("MAC controller is a RTL8187SE b/g");
- priv->phy_ver = 2;
priv->ieee80211->modulation |= IEEE80211_OFDM_MODULATION;
priv->ieee80211->short_slot = 1;
- /* just for sync 85 */
- priv->enable_gpio0 = 0;
-
- eeprom_93cx6_read(&eeprom, EEPROM_SW_REVD_OFFSET, &eeprom_val);
- usValue = eeprom_val;
- DMESG("usValue is 0x%x\n", usValue);
+ eeprom_93cx6_read(&eeprom, EEPROM_SW_REVD_OFFSET, &usValue);
+ DMESG("usValue is %#hx\n", usValue);
/* 3Read AntennaDiversity */
/* SW Antenna Diversity. */
- if ((usValue & EEPROM_SW_AD_MASK) != EEPROM_SW_AD_ENABLE)
- priv->EEPROMSwAntennaDiversity = false;
- else
- priv->EEPROMSwAntennaDiversity = true;
+ priv->EEPROMSwAntennaDiversity = (usValue & EEPROM_SW_AD_MASK) ==
+ EEPROM_SW_AD_ENABLE;
/* Default Antenna to use. */
- if ((usValue & EEPROM_DEF_ANT_MASK) != EEPROM_DEF_ANT_1)
- priv->EEPROMDefaultAntenna1 = false;
- else
- priv->EEPROMDefaultAntenna1 = true;
+ priv->EEPROMDefaultAntenna1 = (usValue & EEPROM_DEF_ANT_MASK) ==
+ EEPROM_DEF_ANT_1;
if (priv->RegSwAntennaDiversityMechanism == 0) /* Auto */
/* 0: default from EEPROM. */
priv->bSwAntennaDiverity = priv->EEPROMSwAntennaDiversity;
else
/* 1:disable antenna diversity, 2: enable antenna diversity. */
- priv->bSwAntennaDiverity = ((priv->RegSwAntennaDiversityMechanism == 1) ? false : true);
+ priv->bSwAntennaDiverity = priv->RegSwAntennaDiversityMechanism == 2;
if (priv->RegDefaultAntenna == 0)
/* 0: default from EEPROM. */
priv->bDefaultAntenna1 = priv->EEPROMDefaultAntenna1;
else
/* 1: main, 2: aux. */
- priv->bDefaultAntenna1 = ((priv->RegDefaultAntenna == 2) ? true : false);
-
- /* rtl8185 can calc plcp len in HW. */
- priv->hw_plcp_len = 1;
+ priv->bDefaultAntenna1 = priv->RegDefaultAntenna == 2;
priv->plcp_preamble_mode = 2;
/* the eeprom type is stored in RCR register bit #6 */
@@ -2909,18 +2643,6 @@
if ((tmpu16 & EEPROM_THERMAL_METER_ENABLE) >> 13)
priv->bTxPowerTrack = true;
- eeprom_93cx6_read(&eeprom, EPROM_TXPW_BASE, &word);
- priv->cck_txpwr_base = word & 0xf;
- priv->ofdm_txpwr_base = (word>>4) & 0xf;
-
- eeprom_93cx6_read(&eeprom, EPROM_VERSION, &version);
- DMESG("EEPROM version %x", version);
- priv->rcr_csense = 3;
-
- eeprom_93cx6_read(&eeprom, ENERGY_TRESHOLD, &eeprom_val);
- priv->cs_treshold = (eeprom_val & 0xff00) >> 8;
-
- eeprom_93cx6_read(&eeprom, RFCHIPID, &eeprom_val);
priv->rf_sleep = rtl8225z4_rf_sleep;
priv->rf_wakeup = rtl8225z4_rf_wakeup;
DMESGW("**PLEASE** REPORT SUCCESSFUL/UNSUCCESSFUL TO Realtek!");
@@ -3084,100 +2806,6 @@
rtl8185_write_phy(dev, adr, data | 0x10000);
}
-void rtl8185_set_rate(struct net_device *dev)
-{
- int i;
- u16 word;
- int basic_rate, min_rr_rate, max_rr_rate;
-
- basic_rate = ieeerate2rtlrate(240);
- min_rr_rate = ieeerate2rtlrate(60);
- max_rr_rate = ieeerate2rtlrate(240);
-
- write_nic_byte(dev, RESP_RATE,
- max_rr_rate<<MAX_RESP_RATE_SHIFT |
- min_rr_rate<<MIN_RESP_RATE_SHIFT);
-
- word = read_nic_word(dev, BRSR);
- word &= ~BRSR_MBR_8185;
-
- for (i = 0; i <= basic_rate; i++)
- word |= (1<<i);
-
- write_nic_word(dev, BRSR, word);
-}
-
-void rtl8180_adapter_start(struct net_device *dev)
-{
- struct r8180_priv *priv = ieee80211_priv(dev);
-
- rtl8180_rtx_disable(dev);
- rtl8180_reset(dev);
-
- /* enable beacon timeout, beacon TX ok and err
- * LP tx ok and err, HP TX ok and err, NP TX ok and err,
- * RX ok and ERR, and GP timer
- */
- priv->irq_mask = 0x6fcf;
-
- priv->dma_poll_mask = 0;
-
- rtl8180_beacon_tx_disable(dev);
-
- rtl8180_set_mode(dev, EPROM_CMD_CONFIG);
- write_nic_dword(dev, MAC0, ((u32 *)dev->dev_addr)[0]);
- write_nic_word(dev, MAC4, ((u32 *)dev->dev_addr)[1] & 0xffff);
- rtl8180_set_mode(dev, EPROM_CMD_NORMAL);
-
- rtl8180_update_msr(dev);
-
- /* These might be unnecessary since we do in rx_enable / tx_enable */
- fix_rx_fifo(dev);
- fix_tx_fifo(dev);
-
- rtl8180_set_mode(dev, EPROM_CMD_CONFIG);
-
- /*
- * The following is very strange. seems to be that 1 means test mode,
- * but we need to acknowledges the nic when a packet is ready
- * although we set it to 0
- */
-
- write_nic_byte(dev,
- CONFIG2, read_nic_byte(dev, CONFIG2) & ~\
- (1<<CONFIG2_DMA_POLLING_MODE_SHIFT));
- /* ^the nic isn't in test mode */
- write_nic_byte(dev,
- CONFIG2, read_nic_byte(dev, CONFIG2)|(1<<4));
-
- rtl8180_set_mode(dev, EPROM_CMD_NORMAL);
-
- write_nic_dword(dev, INT_TIMEOUT, 0);
-
- write_nic_byte(dev, WPA_CONFIG, 0);
-
- rtl8180_no_hw_wep(dev);
-
- rtl8185_set_rate(dev);
- write_nic_byte(dev, RATE_FALLBACK, 0x81);
-
- write_nic_byte(dev, GP_ENABLE, read_nic_byte(dev, GP_ENABLE) & ~(1<<6));
-
- /* FIXME cfg 3 ClkRun enable - isn't it ReadOnly ? */
- rtl8180_set_mode(dev, EPROM_CMD_CONFIG);
- write_nic_byte(dev, CONFIG3, read_nic_byte(dev, CONFIG3)
- | (1 << CONFIG3_CLKRUN_SHIFT));
- rtl8180_set_mode(dev, EPROM_CMD_NORMAL);
-
- priv->rf_init(dev);
-
- if (priv->rf_set_sens != NULL)
- priv->rf_set_sens(dev, priv->sens);
- rtl8180_irq_enable(dev);
-
- netif_start_queue(dev);
-}
-
/*
* This configures registers for beacon tx and enables it via
* rtl8180_beacon_tx_enable(). rtl8180_beacon_tx_disable() might
@@ -3299,8 +2927,6 @@
}
}
-static u8 read_acadapter_file(char *filename);
-
void rtl8180_watch_dog(struct net_device *dev)
{
struct r8180_priv *priv = ieee80211_priv(dev);
@@ -3333,12 +2959,7 @@
MgntLinkKeepAlive(priv);
/* YJ,add,080828,for LPS */
- if (priv->PowerProfile == POWER_PROFILE_BATTERY)
- priv->bLeisurePs = true;
- else if (priv->PowerProfile == POWER_PROFILE_AC) {
- LeisurePSLeave(priv);
- priv->bLeisurePs = false;
- }
+ LeisurePSLeave(priv);
if (priv->ieee80211->state == IEEE80211_LINKED) {
priv->link_detect.NumRxOkInPeriod = priv->ieee80211->NumRxDataInPeriod;
@@ -3555,7 +3176,7 @@
.ndo_start_xmit = ieee80211_rtl_xmit,
};
-static int __devinit rtl8180_pci_probe(struct pci_dev *pdev,
+static int rtl8180_pci_probe(struct pci_dev *pdev,
const struct pci_device_id *id)
{
unsigned long ioaddr = 0;
@@ -3638,7 +3259,8 @@
netif_carrier_off(dev);
- register_netdev(dev);
+ if (register_netdev(dev))
+ goto fail1;
rtl8180_proc_init_one(dev);
@@ -3667,7 +3289,7 @@
return ret;
}
-static void __devexit rtl8180_pci_remove(struct pci_dev *pdev)
+static void rtl8180_pci_remove(struct pci_dev *pdev)
{
struct r8180_priv *priv;
struct net_device *dev = pci_get_drvdata(pdev);
@@ -3721,27 +3343,27 @@
ret = ieee80211_crypto_init();
if (ret) {
- printk(KERN_ERR "ieee80211_crypto_init() failed %d\n", ret);
+ pr_err("ieee80211_crypto_init() failed %d\n", ret);
return ret;
}
ret = ieee80211_crypto_tkip_init();
if (ret) {
- printk(KERN_ERR "ieee80211_crypto_tkip_init() failed %d\n", ret);
+ pr_err("ieee80211_crypto_tkip_init() failed %d\n", ret);
return ret;
}
ret = ieee80211_crypto_ccmp_init();
if (ret) {
- printk(KERN_ERR "ieee80211_crypto_ccmp_init() failed %d\n", ret);
+ pr_err("ieee80211_crypto_ccmp_init() failed %d\n", ret);
return ret;
}
ret = ieee80211_crypto_wep_init();
if (ret) {
- printk(KERN_ERR "ieee80211_crypto_wep_init() failed %d\n", ret);
+ pr_err("ieee80211_crypto_wep_init() failed %d\n", ret);
return ret;
}
- printk(KERN_INFO "\nLinux kernel driver for RTL8180 / RTL8185 based WLAN cards\n");
- printk(KERN_INFO "Copyright (c) 2004-2005, Andrea Merello\n");
+ pr_info("\nLinux kernel driver for RTL8180 / RTL8185 based WLAN cards\n");
+ pr_info("Copyright (c) 2004-2005, Andrea Merello\n");
DMESG("Initializing module");
DMESG("Wireless extensions version %d", WIRELESS_EXT);
rtl8180_proc_module_init();
@@ -3844,7 +3466,7 @@
return ;
}
- nicv = (u32 *)((nic - nicbegin) + (u8*)begin);
+ nicv = (u32 *)((nic - nicbegin) + (u8 *)begin);
if ((head <= tail && (nicv > tail || nicv < head)) ||
(head > tail && (nicv > tail && nicv < head))) {
DMESGW("nic has lost pointer");
@@ -3932,15 +3554,6 @@
spin_unlock_irqrestore(&priv->tx_lock, flag);
}
-void rtl8180_tx_irq_wq(struct work_struct *work)
-{
- struct delayed_work *dwork = to_delayed_work(work);
- struct ieee80211_device * ieee = (struct ieee80211_device *)
- container_of(dwork, struct ieee80211_device, watch_dog_wq);
- struct net_device *dev = ieee->dev;
-
- rtl8180_tx_isr(dev, MANAGE_PRIORITY, 0);
-}
irqreturn_t rtl8180_interrupt(int irq, void *netdev, struct pt_regs *regs)
{
struct net_device *dev = (struct net_device *) netdev;
@@ -4013,7 +3626,7 @@
priv->stats.txbkperr++;
priv->ieee80211->stats.tx_errors++;
rtl8180_tx_isr(dev, BK_PRIORITY, 1);
- rtl8180_try_wake_queue(dev, BE_PRIORITY);
+ rtl8180_try_wake_queue(dev, BK_PRIORITY);
}
if (inta & ISR_TBEDER) { /* corresponding to BE_PRIORITY */
@@ -4067,6 +3680,7 @@
priv->link_detect.NumTxOkInPeriod++; /* YJ,add,080828 */
priv->stats.txnpokint++;
rtl8180_tx_isr(dev, NORM_PRIORITY, 0);
+ rtl8180_try_wake_queue(dev, NORM_PRIORITY);
}
if (inta & ISR_TLPDOK) { /* Low priority tx ok */
@@ -4113,10 +3727,7 @@
char *argv[3];
static char *RadioPowerPath = "/etc/acpi/events/RadioPower.sh";
static char *envp[] = {"HOME=/", "TERM=linux", "PATH=/usr/bin:/bin", NULL};
- static int readf_count = 0;
-
- if (readf_count % 10 == 0)
- priv->PowerProfile = read_acadapter_file("/proc/acpi/ac_adapter/AC0/state");
+ static int readf_count;
readf_count = (readf_count+1)%0xffff;
/* We should turn off LED before polling FF51[4]. */
@@ -4162,10 +3773,5 @@
}
}
-static u8 read_acadapter_file(char *filename)
-{
- return 0;
-}
-
module_init(rtl8180_pci_module_init);
module_exit(rtl8180_pci_module_exit);
diff --git a/drivers/staging/rtl8187se/r8180_dm.h b/drivers/staging/rtl8187se/r8180_dm.h
index b775825..732c06a 100644
--- a/drivers/staging/rtl8187se/r8180_dm.h
+++ b/drivers/staging/rtl8187se/r8180_dm.h
@@ -13,10 +13,10 @@
bool CheckHighPower(struct net_device *dev);
void rtl8180_hw_dig_wq(struct work_struct *work);
void rtl8180_tx_pw_wq(struct work_struct *work);
-void rtl8180_rate_adapter(struct work_struct * work);
+void rtl8180_rate_adapter(struct work_struct *work);
void TxPwrTracking87SE(struct net_device *dev);
bool CheckTxPwrTracking(struct net_device *dev);
-void rtl8180_rate_adapter(struct work_struct * work);
+void rtl8180_rate_adapter(struct work_struct *work);
void timer_rate_adaptive(unsigned long data);
diff --git a/drivers/staging/rtl8187se/r8180_rtl8225.h b/drivers/staging/rtl8187se/r8180_rtl8225.h
index 494ea86..c6f2128 100644
--- a/drivers/staging/rtl8187se/r8180_rtl8225.h
+++ b/drivers/staging/rtl8187se/r8180_rtl8225.h
@@ -23,8 +23,8 @@
void rtl8225z2_rf_set_chan(struct net_device *dev, short ch);
void rtl8225z2_rf_close(struct net_device *dev);
-void RF_WriteReg(struct net_device *dev, u8 offset, u32 data);
-u32 RF_ReadReg(struct net_device *dev, u8 offset);
+void RF_WriteReg(struct net_device *dev, u8 offset, u16 data);
+u16 RF_ReadReg(struct net_device *dev, u8 offset);
void rtl8180_set_mode(struct net_device *dev, int mode);
void rtl8180_set_mode(struct net_device *dev, int mode);
diff --git a/drivers/staging/rtl8187se/r8180_rtl8225z2.c b/drivers/staging/rtl8187se/r8180_rtl8225z2.c
index d28c1d9..c592f79 100644
--- a/drivers/staging/rtl8187se/r8180_rtl8225z2.c
+++ b/drivers/staging/rtl8187se/r8180_rtl8225z2.c
@@ -15,7 +15,6 @@
#include "ieee80211/dot11d.h"
-
static void write_rtl8225(struct net_device *dev, u8 adr, u16 data)
{
int i;
@@ -76,22 +75,6 @@
rtl8185_rf_pins_enable(dev);
}
-static const u16 rtl8225bcd_rxgain[] = {
- 0x0400, 0x0401, 0x0402, 0x0403, 0x0404, 0x0405, 0x0408, 0x0409,
- 0x040a, 0x040b, 0x0502, 0x0503, 0x0504, 0x0505, 0x0540, 0x0541,
- 0x0542, 0x0543, 0x0544, 0x0545, 0x0580, 0x0581, 0x0582, 0x0583,
- 0x0584, 0x0585, 0x0588, 0x0589, 0x058a, 0x058b, 0x0643, 0x0644,
- 0x0645, 0x0680, 0x0681, 0x0682, 0x0683, 0x0684, 0x0685, 0x0688,
- 0x0689, 0x068a, 0x068b, 0x068c, 0x0742, 0x0743, 0x0744, 0x0745,
- 0x0780, 0x0781, 0x0782, 0x0783, 0x0784, 0x0785, 0x0788, 0x0789,
- 0x078a, 0x078b, 0x078c, 0x078d, 0x0790, 0x0791, 0x0792, 0x0793,
- 0x0794, 0x0795, 0x0798, 0x0799, 0x079a, 0x079b, 0x079c, 0x079d,
- 0x07a0, 0x07a1, 0x07a2, 0x07a3, 0x07a4, 0x07a5, 0x07a8, 0x07a9,
- 0x07aa, 0x07ab, 0x07ac, 0x07ad, 0x07b0, 0x07b1, 0x07b2, 0x07b3,
- 0x07b4, 0x07b5, 0x07b8, 0x07b9, 0x07ba, 0x07bb, 0x07bb
-
-};
-
static const u8 rtl8225_agc[] = {
0x9e, 0x9e, 0x9e, 0x9e, 0x9e, 0x9e, 0x9e, 0x9e,
0x9d, 0x9c, 0x9b, 0x9a, 0x99, 0x98, 0x97, 0x96,
@@ -111,122 +94,12 @@
0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
};
-static const u8 rtl8225_gain[] = {
- 0x23, 0x88, 0x7c, 0xa5, /* -82dBm */
- 0x23, 0x88, 0x7c, 0xb5, /* -82dBm */
- 0x23, 0x88, 0x7c, 0xc5, /* -82dBm */
- 0x33, 0x80, 0x79, 0xc5, /* -78dBm */
- 0x43, 0x78, 0x76, 0xc5, /* -74dBm */
- 0x53, 0x60, 0x73, 0xc5, /* -70dBm */
- 0x63, 0x58, 0x70, 0xc5, /* -66dBm */
-};
-
-static const u8 rtl8225_tx_gain_cck_ofdm[] = {
- 0x02, 0x06, 0x0e, 0x1e, 0x3e, 0x7e
-};
-
-static const u8 rtl8225_tx_power_cck[] = {
- 0x18, 0x17, 0x15, 0x11, 0x0c, 0x08, 0x04, 0x02,
- 0x1b, 0x1a, 0x17, 0x13, 0x0e, 0x09, 0x04, 0x02,
- 0x1f, 0x1e, 0x1a, 0x15, 0x10, 0x0a, 0x05, 0x02,
- 0x22, 0x21, 0x1d, 0x18, 0x11, 0x0b, 0x06, 0x02,
- 0x26, 0x25, 0x21, 0x1b, 0x14, 0x0d, 0x06, 0x03,
- 0x2b, 0x2a, 0x25, 0x1e, 0x16, 0x0e, 0x07, 0x03
-};
-
-static const u8 rtl8225_tx_power_cck_ch14[] = {
- 0x18, 0x17, 0x15, 0x0c, 0x00, 0x00, 0x00, 0x00,
- 0x1b, 0x1a, 0x17, 0x0e, 0x00, 0x00, 0x00, 0x00,
- 0x1f, 0x1e, 0x1a, 0x0f, 0x00, 0x00, 0x00, 0x00,
- 0x22, 0x21, 0x1d, 0x11, 0x00, 0x00, 0x00, 0x00,
- 0x26, 0x25, 0x21, 0x13, 0x00, 0x00, 0x00, 0x00,
- 0x2b, 0x2a, 0x25, 0x15, 0x00, 0x00, 0x00, 0x00
-};
-
-static const u8 rtl8225_tx_power_ofdm[] = {
- 0x80, 0x90, 0xa2, 0xb5, 0xcb, 0xe4
-};
-
static const u32 rtl8225_chan[] = {
0,
0x0080, 0x0100, 0x0180, 0x0200, 0x0280, 0x0300, 0x0380,
0x0400, 0x0480, 0x0500, 0x0580, 0x0600, 0x0680, 0x074A,
};
-static void rtl8225_SetTXPowerLevel(struct net_device *dev, short ch)
-{
- struct r8180_priv *priv = ieee80211_priv(dev);
- int GainIdx;
- int GainSetting;
- int i;
- u8 power;
- const u8 *cck_power_table;
- u8 max_cck_power_level;
- u8 max_ofdm_power_level;
- u8 min_ofdm_power_level;
- u8 cck_power_level = 0xff & priv->chtxpwr[ch];
- u8 ofdm_power_level = 0xff & priv->chtxpwr_ofdm[ch];
-
- max_cck_power_level = 35;
- max_ofdm_power_level = 35;
- min_ofdm_power_level = 0;
-
- if (cck_power_level > max_cck_power_level)
- cck_power_level = max_cck_power_level;
-
- GainIdx = cck_power_level % 6;
- GainSetting = cck_power_level / 6;
-
- if (ch == 14)
- cck_power_table = rtl8225_tx_power_cck_ch14;
- else
- cck_power_table = rtl8225_tx_power_cck;
-
- write_nic_byte(dev, TX_GAIN_CCK,
- rtl8225_tx_gain_cck_ofdm[GainSetting] >> 1);
-
- for (i = 0; i < 8; i++) {
- power = cck_power_table[GainIdx * 8 + i];
- write_phy_cck(dev, 0x44 + i, power);
- }
-
- /* FIXME Is this delay really needed ? */
- force_pci_posting(dev);
- mdelay(1);
-
- if (ofdm_power_level > (max_ofdm_power_level - min_ofdm_power_level))
- ofdm_power_level = max_ofdm_power_level;
- else
- ofdm_power_level += min_ofdm_power_level;
-
- if (ofdm_power_level > 35)
- ofdm_power_level = 35;
-
- GainIdx = ofdm_power_level % 6;
- GainSetting = ofdm_power_level / 6;
-
- rtl8185_set_anaparam2(dev, RTL8225_ANAPARAM2_ON);
-
- write_phy_ofdm(dev, 2, 0x42);
- write_phy_ofdm(dev, 6, 0x00);
- write_phy_ofdm(dev, 8, 0x00);
-
- write_nic_byte(dev, TX_GAIN_OFDM,
- rtl8225_tx_gain_cck_ofdm[GainSetting] >> 1);
-
- power = rtl8225_tx_power_ofdm[GainIdx];
-
- write_phy_ofdm(dev, 5, power);
- write_phy_ofdm(dev, 7, power);
-
- force_pci_posting(dev);
- mdelay(1);
-}
-
-static const u8 rtl8225z2_threshold[] = {
- 0x8d, 0x8d, 0x8d, 0x8d, 0x9d, 0xad, 0xbd,
-};
-
static const u8 rtl8225z2_gain_bg[] = {
0x23, 0x15, 0xa5, /* -82-1dBm */
0x23, 0x15, 0xb5, /* -82-2dBm */
@@ -259,31 +132,10 @@
0x0794, 0x0795, 0x0798, 0x0799, 0x079a, 0x079b, 0x079c, 0x079d,
0x07a0, 0x07a1, 0x07a2, 0x07a3, 0x07a4, 0x07a5, 0x07a8, 0x07a9,
0x03aa, 0x03ab, 0x03ac, 0x03ad, 0x03b0, 0x03b1, 0x03b2, 0x03b3,
- 0x03b4, 0x03b5, 0x03b8, 0x03b9, 0x03ba, 0x03bb, 0x03bb
+ 0x03b4, 0x03b5, 0x03b8, 0x03b9, 0x03ba, 0x03bb
};
-static const u8 ZEBRA2_CCK_OFDM_GAIN_SETTING[] = {
- 0x00, 0x01, 0x02, 0x03, 0x04, 0x05,
- 0x06, 0x07, 0x08, 0x09, 0x0a, 0x0b,
- 0x0c, 0x0d, 0x0e, 0x0f, 0x10, 0x11,
- 0x12, 0x13, 0x14, 0x15, 0x16, 0x17,
- 0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d,
- 0x1e, 0x1f, 0x20, 0x21, 0x22, 0x23,
-};
-
-static const u8 rtl8225z2_tx_power_ofdm[] = {
- 0x42, 0x00, 0x40, 0x00, 0x40
-};
-
-static const u8 rtl8225z2_tx_power_cck_ch14[] = {
- 0x36, 0x35, 0x2e, 0x1b, 0x00, 0x00, 0x00, 0x00
-};
-
-static const u8 rtl8225z2_tx_power_cck[] = {
- 0x36, 0x35, 0x2e, 0x25, 0x1c, 0x12, 0x09, 0x04
-};
-
void rtl8225z2_set_gain(struct net_device *dev, short gain)
{
const u8 *rtl8225_gain;
@@ -412,22 +264,6 @@
return dataRead;
}
-short rtl8225_is_V_z2(struct net_device *dev)
-{
- short vz2 = 1;
-
- if (read_rtl8225(dev, 8) != 0x588)
- vz2 = 0;
- else /* reg 9 pg 1 = 24 */
- if (read_rtl8225(dev, 9) != 0x700)
- vz2 = 0;
-
- /* sw back to pg 0 */
- write_rtl8225(dev, 0, 0xb7);
-
- return vz2;
-}
-
void rtl8225z2_rf_close(struct net_device *dev)
{
RF_WriteReg(dev, 0x4, 0x1f);
@@ -524,8 +360,7 @@
if (cck_power_level > 35)
cck_power_level = 35;
- write_nic_byte(dev, CCK_TXAGC,
- (ZEBRA2_CCK_OFDM_GAIN_SETTING[(u8)cck_power_level]));
+ write_nic_byte(dev, CCK_TXAGC, cck_power_level);
force_pci_posting(dev);
mdelay(1);
@@ -540,8 +375,7 @@
write_phy_ofdm(dev, 8, 0x40);
}
- write_nic_byte(dev, OFDM_TXAGC,
- ZEBRA2_CCK_OFDM_GAIN_SETTING[(u8)ofdm_power_level]);
+ write_nic_byte(dev, OFDM_TXAGC, ofdm_power_level);
if (ofdm_power_level <= 11) {
write_phy_ofdm(dev, 0x07, 0x5c);
@@ -592,50 +426,13 @@
write_nic_word(dev, GP_ENABLE, 0xff & (~(1 << 6)));
}
-static void rtl8225_rf_set_chan(struct net_device *dev, short ch)
-{
- struct r8180_priv *priv = ieee80211_priv(dev);
- short gset = (priv->ieee80211->state == IEEE80211_LINKED &&
- ieee80211_is_54g(&priv->ieee80211->current_network)) ||
- priv->ieee80211->iw_mode == IW_MODE_MONITOR;
-
- rtl8225_SetTXPowerLevel(dev, ch);
-
- write_rtl8225(dev, 0x7, rtl8225_chan[ch]);
-
- force_pci_posting(dev);
- mdelay(10);
-
- if (gset) {
- write_nic_byte(dev, SIFS, 0x22);
- write_nic_byte(dev, DIFS, 0x14);
- } else {
- write_nic_byte(dev, SIFS, 0x44);
- write_nic_byte(dev, DIFS, 0x24);
- }
-
- if (priv->ieee80211->state == IEEE80211_LINKED &&
- ieee80211_is_shortslot(&priv->ieee80211->current_network))
- write_nic_byte(dev, SLOT, 0x9);
- else
- write_nic_byte(dev, SLOT, 0x14);
-
- if (gset) {
- write_nic_byte(dev, EIFS, 81);
- write_nic_byte(dev, CW_VAL, 0x73);
- } else {
- write_nic_byte(dev, EIFS, 81);
- write_nic_byte(dev, CW_VAL, 0xa5);
- }
-}
-
void rtl8225z2_rf_init(struct net_device *dev)
{
struct r8180_priv *priv = ieee80211_priv(dev);
int i;
short channel = 1;
- u16 brsr;
- u32 data, addr;
+ u16 brsr;
+ u32 data;
priv->chan = channel;
@@ -676,8 +473,8 @@
write_rtl8225(dev, 0x0, 0x1b7);
- for (i = 0; i < 95; i++) {
- write_rtl8225(dev, 0x1, (u8)(i + 1));
+ for (i = 0; i < ARRAY_SIZE(rtl8225z2_rxgain); i++) {
+ write_rtl8225(dev, 0x1, i + 1);
write_rtl8225(dev, 0x2, rtl8225z2_rxgain[i]);
}
@@ -707,14 +504,12 @@
write_rtl8225(dev, 0x0, 0x2bf);
- for (i = 0; i < 128; i++) {
- data = rtl8225_agc[i];
-
- addr = i + 0x80; /* enable writing AGC table */
- write_phy_ofdm(dev, 0xb, data);
+ for (i = 0; i < ARRAY_SIZE(rtl8225_agc); i++) {
+ write_phy_ofdm(dev, 0xb, rtl8225_agc[i]);
mdelay(1);
- write_phy_ofdm(dev, 0xa, addr);
+ /* enable writing AGC table */
+ write_phy_ofdm(dev, 0xa, i + 0x80);
mdelay(1);
}
@@ -808,7 +603,7 @@
write_nic_dword(dev, 0x94, 0x15c00002);
rtl8185_rf_pins_enable(dev);
- rtl8225_rf_set_chan(dev, priv->chan);
+ rtl8225z2_rf_set_chan(dev, priv->chan);
}
void rtl8225z2_rf_set_mode(struct net_device *dev)
diff --git a/drivers/staging/rtl8187se/r8180_wx.c b/drivers/staging/rtl8187se/r8180_wx.c
index 52f63d7..156b758 100644
--- a/drivers/staging/rtl8187se/r8180_wx.c
+++ b/drivers/staging/rtl8187se/r8180_wx.c
@@ -59,8 +59,6 @@
if (priv->ieee80211->bHwRadioOff)
return 0;
- if (erq->flags & IW_ENCODE_DISABLED)
-
if (erq->length > 0) {
u32* tkey = (u32*) key;
priv->key0[0] = tkey[0];
diff --git a/drivers/staging/rtl8187se/r8185b_init.c b/drivers/staging/rtl8187se/r8185b_init.c
index bf34319..f1db9e4 100644
--- a/drivers/staging/rtl8187se/r8185b_init.c
+++ b/drivers/staging/rtl8187se/r8185b_init.c
@@ -207,156 +207,84 @@
write_nic_word(dev, RFPinsEnable, 0x1bff);
}
-static int HwHSSIThreeWire(struct net_device *dev,
- u8 *pDataBuf,
- u8 nDataBufBitCnt,
- int bSI,
- int bWrite)
+static bool HwHSSIThreeWire(struct net_device *dev,
+ u8 *pDataBuf,
+ bool write)
{
- int bResult = 1;
u8 TryCnt;
u8 u1bTmp;
- do {
- /* Check if WE and RE are cleared. */
- for (TryCnt = 0; TryCnt < TC_3W_POLL_MAX_TRY_CNT; TryCnt++) {
- u1bTmp = read_nic_byte(dev, SW_3W_CMD1);
- if ((u1bTmp & (SW_3W_CMD1_RE|SW_3W_CMD1_WE)) == 0)
- break;
+ /* Check if WE and RE are cleared. */
+ for (TryCnt = 0; TryCnt < TC_3W_POLL_MAX_TRY_CNT; TryCnt++) {
+ u1bTmp = read_nic_byte(dev, SW_3W_CMD1);
+ if ((u1bTmp & (SW_3W_CMD1_RE|SW_3W_CMD1_WE)) == 0)
+ break;
- udelay(10);
- }
- if (TryCnt == TC_3W_POLL_MAX_TRY_CNT) {
- printk(KERN_ERR "rtl8187se: HwThreeWire(): CmdReg:"
- " %#X RE|WE bits are not clear!!\n", u1bTmp);
- dump_stack();
- return 0;
- }
+ udelay(10);
+ }
+ if (TryCnt == TC_3W_POLL_MAX_TRY_CNT) {
+ netdev_err(dev,
+ "HwThreeWire(): CmdReg: %#X RE|WE bits are not clear!!\n",
+ u1bTmp);
+ return false;
+ }
- /* RTL8187S HSSI Read/Write Function */
- u1bTmp = read_nic_byte(dev, RF_SW_CONFIG);
+ /* RTL8187S HSSI Read/Write Function */
+ u1bTmp = read_nic_byte(dev, RF_SW_CONFIG);
+ u1bTmp |= RF_SW_CFG_SI; /* reg08[1]=1 Serial Interface(SI) */
+ write_nic_byte(dev, RF_SW_CONFIG, u1bTmp);
- if (bSI)
- u1bTmp |= RF_SW_CFG_SI; /* reg08[1]=1 Serial Interface(SI) */
+ /* jong: HW SI read must set reg84[3]=0. */
+ u1bTmp = read_nic_byte(dev, RFPinsSelect);
+ u1bTmp &= ~BIT3;
+ write_nic_byte(dev, RFPinsSelect, u1bTmp);
+ /* Fill up data buffer for write operation. */
- else
- u1bTmp &= ~RF_SW_CFG_SI; /* reg08[1]=0 Parallel Interface(PI) */
+ /* SI - reg274[3:0] : RF register's Address */
+ if (write)
+ write_nic_word(dev, SW_3W_DB0, *((u16 *)pDataBuf));
+ else
+ write_nic_word(dev, SW_3W_DB0, *((u16 *)pDataBuf));
+
+ /* Set up command: WE or RE. */
+ if (write)
+ write_nic_byte(dev, SW_3W_CMD1, SW_3W_CMD1_WE);
+ else
+ write_nic_byte(dev, SW_3W_CMD1, SW_3W_CMD1_RE);
- write_nic_byte(dev, RF_SW_CONFIG, u1bTmp);
+ /* Check if DONE is set. */
+ for (TryCnt = 0; TryCnt < TC_3W_POLL_MAX_TRY_CNT; TryCnt++) {
+ u1bTmp = read_nic_byte(dev, SW_3W_CMD1);
+ if (u1bTmp & SW_3W_CMD1_DONE)
+ break;
- if (bSI) {
- /* jong: HW SI read must set reg84[3]=0. */
- u1bTmp = read_nic_byte(dev, RFPinsSelect);
- u1bTmp &= ~BIT3;
- write_nic_byte(dev, RFPinsSelect, u1bTmp);
- }
- /* Fill up data buffer for write operation. */
+ udelay(10);
+ }
- if (bWrite) {
- if (nDataBufBitCnt == 16) {
- write_nic_word(dev, SW_3W_DB0, *((u16 *)pDataBuf));
- } else if (nDataBufBitCnt == 64) {
- /* RTL8187S shouldn't enter this case */
- write_nic_dword(dev, SW_3W_DB0, *((u32 *)pDataBuf));
- write_nic_dword(dev, SW_3W_DB1, *((u32 *)(pDataBuf + 4)));
- } else {
- int idx;
- int ByteCnt = nDataBufBitCnt / 8;
- /* printk("%d\n",nDataBufBitCnt); */
- if ((nDataBufBitCnt % 8) != 0) {
- printk(KERN_ERR "rtl8187se: "
- "HwThreeWire(): nDataBufBitCnt(%d)"
- " should be multiple of 8!!!\n",
- nDataBufBitCnt);
- dump_stack();
- nDataBufBitCnt += 8;
- nDataBufBitCnt &= ~7;
- }
+ write_nic_byte(dev, SW_3W_CMD1, 0);
- if (nDataBufBitCnt > 64) {
- printk(KERN_ERR "rtl8187se: HwThreeWire():"
- " nDataBufBitCnt(%d) should <= 64!!!\n",
- nDataBufBitCnt);
- dump_stack();
- nDataBufBitCnt = 64;
- }
+ /* Read back data for read operation. */
+ if (!write) {
+ /* Serial Interface : reg363_362[11:0] */
+ *((u16 *)pDataBuf) = read_nic_word(dev, SI_DATA_READ);
+ *((u16 *)pDataBuf) &= 0x0FFF;
+ }
- for (idx = 0; idx < ByteCnt; idx++)
- write_nic_byte(dev, (SW_3W_DB0+idx), *(pDataBuf+idx));
-
- }
- } else { /* read */
- if (bSI) {
- /* SI - reg274[3:0] : RF register's Address */
- write_nic_word(dev, SW_3W_DB0, *((u16 *)pDataBuf));
- } else {
- /* PI - reg274[15:12] : RF register's Address */
- write_nic_word(dev, SW_3W_DB0, (*((u16 *)pDataBuf)) << 12);
- }
- }
-
- /* Set up command: WE or RE. */
- if (bWrite)
- write_nic_byte(dev, SW_3W_CMD1, SW_3W_CMD1_WE);
-
- else
- write_nic_byte(dev, SW_3W_CMD1, SW_3W_CMD1_RE);
-
-
- /* Check if DONE is set. */
- for (TryCnt = 0; TryCnt < TC_3W_POLL_MAX_TRY_CNT; TryCnt++) {
- u1bTmp = read_nic_byte(dev, SW_3W_CMD1);
- if ((u1bTmp & SW_3W_CMD1_DONE) != 0)
- break;
-
- udelay(10);
- }
-
- write_nic_byte(dev, SW_3W_CMD1, 0);
-
- /* Read back data for read operation. */
- if (bWrite == 0) {
- if (bSI) {
- /* Serial Interface : reg363_362[11:0] */
- *((u16 *)pDataBuf) = read_nic_word(dev, SI_DATA_READ) ;
- } else {
- /* Parallel Interface : reg361_360[11:0] */
- *((u16 *)pDataBuf) = read_nic_word(dev, PI_DATA_READ);
- }
-
- *((u16 *)pDataBuf) &= 0x0FFF;
- }
-
- } while (0);
-
- return bResult;
+ return true;
}
-void RF_WriteReg(struct net_device *dev, u8 offset, u32 data)
+void RF_WriteReg(struct net_device *dev, u8 offset, u16 data)
{
- u32 data2Write;
- u8 len;
-
- /* Pure HW 3-wire. */
- data2Write = (data << 4) | (u32)(offset & 0x0f);
- len = 16;
-
- HwHSSIThreeWire(dev, (u8 *)(&data2Write), len, 1, 1);
+ u16 reg = (data << 4) | (offset & 0x0f);
+ HwHSSIThreeWire(dev, (u8 *)®, true);
}
-u32 RF_ReadReg(struct net_device *dev, u8 offset)
+u16 RF_ReadReg(struct net_device *dev, u8 offset)
{
- u32 data2Write;
- u8 wlen;
- u32 dataRead;
-
- data2Write = ((u32)(offset & 0x0f));
- wlen = 16;
- HwHSSIThreeWire(dev, (u8 *)(&data2Write), wlen, 1, 0);
- dataRead = data2Write;
-
- return dataRead;
+ u16 reg = offset & 0x0f;
+ HwHSSIThreeWire(dev, (u8 *)®, false);
+ return reg;
}
@@ -472,7 +400,8 @@
struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
u32 i;
u32 addr, data;
- u32 u4bRegOffset, u4bRegValue, u4bRF23, u4bRF24;
+ u32 u4bRegOffset, u4bRegValue;
+ u16 u4bRF23, u4bRF24;
u8 u1b24E;
int d_cut = 0;
@@ -491,7 +420,7 @@
if (u4bRF23 == 0x818 && u4bRF24 == 0x70C) {
d_cut = 1;
- printk(KERN_INFO "rtl8187se: card type changed from C- to D-cut\n");
+ netdev_info(dev, "card type changed from C- to D-cut\n");
}
/* Page0 : reg0-reg15 */
@@ -930,10 +859,7 @@
u8 GetSupportedWirelessMode8185(struct net_device *dev)
{
- u8 btSupportedWirelessMode = 0;
-
- btSupportedWirelessMode = (WIRELESS_MODE_B | WIRELESS_MODE_G);
- return btSupportedWirelessMode;
+ return WIRELESS_MODE_B | WIRELESS_MODE_G;
}
void ActUpdateChannelAccessSetting(struct net_device *dev,
@@ -1130,13 +1056,13 @@
ieee->mode = (WIRELESS_MODE)btWirelessMode;
/* 3. Change related setting. */
- if( ieee->mode == WIRELESS_MODE_A ) {
+ if (ieee->mode == WIRELESS_MODE_A)
DMESG("WIRELESS_MODE_A\n");
- } else if( ieee->mode == WIRELESS_MODE_B ) {
+ else if (ieee->mode == WIRELESS_MODE_B)
DMESG("WIRELESS_MODE_B\n");
- } else if( ieee->mode == WIRELESS_MODE_G ) {
+ else if (ieee->mode == WIRELESS_MODE_G)
DMESG("WIRELESS_MODE_G\n");
- }
+
ActUpdateChannelAccessSetting( dev, ieee->mode, &priv->ChannelAccessSetting);
}
@@ -1148,18 +1074,11 @@
write_nic_dword(dev, IMR, priv->IntrMask);
}
-void DrvIFIndicateDisassociation(struct net_device *dev, u16 reason)
-{
- /* nothing is needed after disassociation request. */
-}
-
void MgntDisconnectIBSS(struct net_device *dev)
{
struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
u8 i;
- DrvIFIndicateDisassociation(dev, unspec_reason);
-
for (i = 0; i < 6 ; i++)
priv->ieee80211->current_network.bssid[i] = 0x55;
@@ -1190,8 +1109,6 @@
if (memcmp(priv->ieee80211->current_network.bssid, asSta, 6) == 0) {
/* ShuChen TODO: change media status. */
- /* ShuChen TODO: What to do when disassociate. */
- DrvIFIndicateDisassociation(dev, unspec_reason);
for (i = 0; i < 6; i++)
priv->ieee80211->current_network.bssid[i] = 0x22;
@@ -1267,14 +1184,6 @@
return bResult;
}
-void HalEnableRx8185Dummy(struct net_device *dev)
-{
-}
-
-void HalDisableRx8185Dummy(struct net_device *dev)
-{
-}
-
bool MgntActSet_RF_State(struct net_device *dev, RT_RF_POWER_STATE StateToSet, u32 ChangeSource)
{
struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
@@ -1323,11 +1232,9 @@
priv->RfOffReason = 0;
bActionAllowed = true;
- if (rtState == eRfOff && ChangeSource >= RF_CHANGE_BY_HW && !priv->bInHctTest)
+ if (rtState == eRfOff && ChangeSource >= RF_CHANGE_BY_HW)
bConnectBySSID = true;
-
- } else
- ;
+ }
break;
case eRfOff:
@@ -1359,18 +1266,6 @@
if (bActionAllowed) {
/* Config HW to the specified mode. */
SetRFPowerState(dev, StateToSet);
-
- /* Turn on RF. */
- if (StateToSet == eRfOn) {
- HalEnableRx8185Dummy(dev);
- if (bConnectBySSID) {
- /* by amy not supported */
- }
- }
- /* Turn off RF. */
- else if (StateToSet == eRfOff)
- HalDisableRx8185Dummy(dev);
-
}
/* Release RF spinlock */
diff --git a/drivers/staging/rtl8192e/rtl8192e/rtl_core.c b/drivers/staging/rtl8192e/rtl8192e/rtl_core.c
index 81134d3..1a70f32 100644
--- a/drivers/staging/rtl8192e/rtl8192e/rtl_core.c
+++ b/drivers/staging/rtl8192e/rtl8192e/rtl_core.c
@@ -82,7 +82,7 @@
.RxCheckStuckHandler = rtl8192_HalRxCheckStuck,
};
-static struct pci_device_id rtl8192_pci_id_tbl[] __devinitdata = {
+static struct pci_device_id rtl8192_pci_id_tbl[] = {
{RTL_PCI_DEVICE(0x10ec, 0x8192, rtl819xp_ops)},
{RTL_PCI_DEVICE(0x07aa, 0x0044, rtl819xp_ops)},
{RTL_PCI_DEVICE(0x07aa, 0x0047, rtl819xp_ops)},
@@ -91,15 +91,15 @@
MODULE_DEVICE_TABLE(pci, rtl8192_pci_id_tbl);
-static int __devinit rtl8192_pci_probe(struct pci_dev *pdev,
+static int rtl8192_pci_probe(struct pci_dev *pdev,
const struct pci_device_id *id);
-static void __devexit rtl8192_pci_disconnect(struct pci_dev *pdev);
+static void rtl8192_pci_disconnect(struct pci_dev *pdev);
static struct pci_driver rtl8192_pci_driver = {
.name = DRV_NAME, /* Driver name */
.id_table = rtl8192_pci_id_tbl, /* PCI_ID table */
.probe = rtl8192_pci_probe, /* probe fn */
- .remove = __devexit_p(rtl8192_pci_disconnect), /* remove fn */
+ .remove = rtl8192_pci_disconnect, /* remove fn */
.suspend = rtl8192E_suspend, /* PM suspend fn */
.resume = rtl8192E_resume, /* PM resume fn */
};
@@ -2846,7 +2846,7 @@
.ndo_start_xmit = rtllib_xmit,
};
-static int __devinit rtl8192_pci_probe(struct pci_dev *pdev,
+static int rtl8192_pci_probe(struct pci_dev *pdev,
const struct pci_device_id *id)
{
unsigned long ioaddr = 0;
@@ -2955,7 +2955,8 @@
netif_carrier_off(dev);
netif_stop_queue(dev);
- register_netdev(dev);
+ if (register_netdev(dev))
+ goto err_free_irq;
RT_TRACE(COMP_INIT, "dev name: %s\n", dev->name);
rtl8192_proc_init_one(dev);
@@ -2981,7 +2982,7 @@
return err;
}
-static void __devexit rtl8192_pci_disconnect(struct pci_dev *pdev)
+static void rtl8192_pci_disconnect(struct pci_dev *pdev)
{
struct net_device *dev = pci_get_drvdata(pdev);
struct r8192_priv *priv ;
diff --git a/drivers/staging/rtl8192e/rtllib.h b/drivers/staging/rtl8192e/rtllib.h
index 9ac8d8e..3485ef1 100644
--- a/drivers/staging/rtl8192e/rtllib.h
+++ b/drivers/staging/rtl8192e/rtllib.h
@@ -2567,7 +2567,7 @@
return ((struct rtllib_device *)netdev_priv(dev))->priv;
}
-extern inline int rtllib_is_empty_essid(const char *essid, int essid_len)
+static inline int rtllib_is_empty_essid(const char *essid, int essid_len)
{
/* Single white space is for Linksys APs */
if (essid_len == 1 && essid[0] == ' ')
@@ -2583,7 +2583,7 @@
return 1;
}
-extern inline int rtllib_is_valid_mode(struct rtllib_device *ieee, int mode)
+static inline int rtllib_is_valid_mode(struct rtllib_device *ieee, int mode)
{
/*
* It is possible for both access points and our device to support
@@ -2609,7 +2609,7 @@
return 0;
}
-extern inline int rtllib_get_hdrlen(u16 fc)
+static inline int rtllib_get_hdrlen(u16 fc)
{
int hdrlen = RTLLIB_3ADDR_LEN;
diff --git a/drivers/staging/rtl8192e/rtllib_tx.c b/drivers/staging/rtl8192e/rtllib_tx.c
index 42900ee..759d7c7 100644
--- a/drivers/staging/rtl8192e/rtllib_tx.c
+++ b/drivers/staging/rtl8192e/rtllib_tx.c
@@ -287,7 +287,7 @@
{
struct rt_hi_throughput *pHTInfo = ieee->pHTInfo;
struct tx_ts_record *pTxTs = NULL;
- struct rtllib_hdr_1addr* hdr = (struct rtllib_hdr_1addr *)skb->data;
+ struct rtllib_hdr_1addr *hdr = (struct rtllib_hdr_1addr *)skb->data;
if (rtllib_act_scanning(ieee, false))
return;
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211.h b/drivers/staging/rtl8192u/ieee80211/ieee80211.h
index 13f45c3..502bfdb 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211.h
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211.h
@@ -235,7 +235,10 @@
-#define aSifsTime ((priv->ieee80211->current_network.mode == IEEE_A)||(priv->ieee80211->current_network.mode == IEEE_N_24G)||(priv->ieee80211->current_network.mode == IEEE_N_5G))? 16 : 10
+#define aSifsTime ((priv->ieee80211->current_network.mode == IEEE_A || \
+ priv->ieee80211->current_network.mode == IEEE_N_24G || \
+ priv->ieee80211->current_network.mode == IEEE_N_5G) ? \
+ 16 : 10)
#define MGMT_QUEUE_NUM 5
diff --git a/drivers/staging/rtl8192u/r8192U_core.c b/drivers/staging/rtl8192u/r8192U_core.c
index 5a2fab9..56367f2 100644
--- a/drivers/staging/rtl8192u/r8192U_core.c
+++ b/drivers/staging/rtl8192u/r8192U_core.c
@@ -144,9 +144,9 @@
MODULE_PARM_DESC(hwwep," Try to use hardware security support. ");
MODULE_PARM_DESC(channels," Channel bitmask for specific locales. NYI");
-static int __devinit rtl8192_usb_probe(struct usb_interface *intf,
+static int rtl8192_usb_probe(struct usb_interface *intf,
const struct usb_device_id *id);
-static void __devexit rtl8192_usb_disconnect(struct usb_interface *intf);
+static void rtl8192_usb_disconnect(struct usb_interface *intf);
static struct usb_driver rtl8192_usb_driver = {
@@ -5739,7 +5739,7 @@
---------------------------- USB_STUFF---------------------------
*****************************************************************************/
-static int __devinit rtl8192_usb_probe(struct usb_interface *intf,
+static int rtl8192_usb_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
// unsigned long ioaddr = 0;
@@ -5826,7 +5826,7 @@
}
-static void __devexit rtl8192_usb_disconnect(struct usb_interface *intf)
+static void rtl8192_usb_disconnect(struct usb_interface *intf)
{
struct net_device *dev = usb_get_intfdata(intf);
diff --git a/drivers/staging/rtl8712/mlme_linux.c b/drivers/staging/rtl8712/mlme_linux.c
index abf96c1..7279854 100644
--- a/drivers/staging/rtl8712/mlme_linux.c
+++ b/drivers/staging/rtl8712/mlme_linux.c
@@ -156,7 +156,7 @@
p = buff;
p += sprintf(p, "ASSOCINFO(ReqIEs=");
len = sec_ie[1] + 2;
- len = (len < IW_CUSTOM_MAX) ? len : IW_CUSTOM_MAX;
+ len = (len < IW_CUSTOM_MAX) ? len : IW_CUSTOM_MAX - 1;
for (i = 0; i < len; i++)
p += sprintf(p, "%02x", sec_ie[i]);
p += sprintf(p, ")");
diff --git a/drivers/staging/rtl8712/rtl871x_cmd.c b/drivers/staging/rtl8712/rtl871x_cmd.c
index 659683e..31f31dbf 100644
--- a/drivers/staging/rtl8712/rtl871x_cmd.c
+++ b/drivers/staging/rtl8712/rtl871x_cmd.c
@@ -814,7 +814,7 @@
struct cmd_priv *pcmdpriv = &padapter->cmdpriv;
struct cmd_obj *ph2c;
struct set_assocsta_parm *psetassocsta_para;
- struct set_stakey_rsp *psetassocsta_rsp = NULL;
+ struct set_assocsta_rsp *psetassocsta_rsp = NULL;
ph2c = (struct cmd_obj *)_malloc(sizeof(struct cmd_obj));
if (ph2c == NULL)
@@ -825,7 +825,7 @@
kfree((u8 *) ph2c);
return _FAIL;
}
- psetassocsta_rsp = (struct set_stakey_rsp *)_malloc(
+ psetassocsta_rsp = (struct set_assocsta_rsp *)_malloc(
sizeof(struct set_assocsta_rsp));
if (psetassocsta_rsp == NULL) {
kfree((u8 *)ph2c);
diff --git a/drivers/staging/rtl8712/rtl871x_ioctl_linux.c b/drivers/staging/rtl8712/rtl871x_ioctl_linux.c
index c9a6a7f..3a64790 100644
--- a/drivers/staging/rtl8712/rtl871x_ioctl_linux.c
+++ b/drivers/staging/rtl8712/rtl871x_ioctl_linux.c
@@ -2110,10 +2110,10 @@
struct iw_point *pdata = &wrqu->data;
u32 u32wps_start = 0;
- if (copy_from_user((void *)&u32wps_start, pdata->pointer, 4))
- return -EFAULT;
if ((padapter->bDriverStopped) || (pdata == NULL))
return -EINVAL;
+ if (copy_from_user((void *)&u32wps_start, pdata->pointer, 4))
+ return -EFAULT;
if (u32wps_start == 0)
u32wps_start = *extra;
if (u32wps_start == 1) /* WPS Start */
diff --git a/drivers/staging/rts5139/Makefile b/drivers/staging/rts5139/Makefile
index 82b8958..75dd312 100644
--- a/drivers/staging/rts5139/Makefile
+++ b/drivers/staging/rts5139/Makefile
@@ -25,13 +25,19 @@
# Makefile for the RTS51xx USB Card Reader drivers.
#
-TARGET_MODULE := rts5139
+obj-$(CONFIG_RTS5139) := rts5139.o
-EXTRA_CFLAGS := -Idrivers/scsi -I$(PWD)
+ccflags-y := -Idrivers/scsi
-obj-m += $(TARGET_MODULE).o
-
-common-obj := rts51x_transport.o rts51x_scsi.o rts51x_fop.o
-
-$(TARGET_MODULE)-objs := $(common-obj) rts51x.o rts51x_chip.o rts51x_card.o \
- xd.o sd.o ms.o sd_cprm.o ms_mg.o
+rts5139-y := \
+ rts51x_transport.o \
+ rts51x_scsi.o \
+ rts51x_fop.o \
+ rts51x.o \
+ rts51x_chip.o \
+ rts51x_card.o \
+ xd.o \
+ sd.o \
+ ms.o \
+ sd_cprm.o \
+ ms_mg.o
diff --git a/drivers/staging/rts5139/ms.c b/drivers/staging/rts5139/ms.c
index 6eef33b..a27f7e2 100644
--- a/drivers/staging/rts5139/ms.c
+++ b/drivers/staging/rts5139/ms.c
@@ -160,7 +160,7 @@
rts51x_add_cmd(chip, WRITE_REG_CMD, MS_CFG, MS_2K_SECTOR_MODE,
0);
- trans_dma_enable(dir, chip, sec_cnt * 512, DMA_512);
+ rts51x_trans_dma_enable(dir, chip, sec_cnt * 512, DMA_512);
rts51x_add_cmd(chip, WRITE_REG_CMD, MS_TRANSFER, 0xFF,
MS_TRANSFER_START | trans_mode);
@@ -602,7 +602,7 @@
if (!chip->option.FT2_fast_mode) {
wait_timeout(250);
- card_power_on(chip, MS_CARD);
+ rts51x_card_power_on(chip, MS_CARD);
wait_timeout(150);
#ifdef SUPPORT_OCP
@@ -872,7 +872,7 @@
int retval;
u8 buf[6];
- ms_cleanup_work(chip);
+ rts51x_ms_cleanup_work(chip);
/* Set Parameter Register */
retval = ms_set_rw_reg_addr(chip, 0, 0, Pro_DataCount1, 6);
@@ -2600,14 +2600,14 @@
return STATUS_FAIL;
}
-int reset_ms_card(struct rts51x_chip *chip)
+int rts51x_reset_ms_card(struct rts51x_chip *chip)
{
struct ms_info *ms_card = &(chip->ms_card);
int retval;
memset(ms_card, 0, sizeof(struct ms_info));
- enable_card_clock(chip, MS_CARD);
+ rts51x_enable_card_clock(chip, MS_CARD);
retval = rts51x_select_card(chip, MS_CARD);
if (retval != STATUS_SUCCESS)
@@ -2936,7 +2936,7 @@
return STATUS_SUCCESS;
}
-void mspro_polling_format_status(struct rts51x_chip *chip)
+void rts51x_mspro_polling_format_status(struct rts51x_chip *chip)
{
struct ms_info *ms_card = &(chip->ms_card);
int i;
@@ -2952,25 +2952,25 @@
return;
}
-void mspro_format_sense(struct rts51x_chip *chip, unsigned int lun)
+void rts51x_mspro_format_sense(struct rts51x_chip *chip, unsigned int lun)
{
struct ms_info *ms_card = &(chip->ms_card);
if (CHK_FORMAT_STATUS(ms_card, FORMAT_SUCCESS)) {
- set_sense_type(chip, lun, SENSE_TYPE_NO_SENSE);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_NO_SENSE);
ms_card->pro_under_formatting = 0;
ms_card->progress = 0;
} else if (CHK_FORMAT_STATUS(ms_card, FORMAT_IN_PROGRESS)) {
- set_sense_data(chip, lun, CUR_ERR, 0x02, 0, 0x04, 0x04,
+ rts51x_set_sense_data(chip, lun, CUR_ERR, 0x02, 0, 0x04, 0x04,
0, (u16) (ms_card->progress));
} else {
- set_sense_type(chip, lun, SENSE_TYPE_FORMAT_CMD_FAILED);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_FORMAT_CMD_FAILED);
ms_card->pro_under_formatting = 0;
ms_card->progress = 0;
}
}
-int mspro_format(struct scsi_cmnd *srb, struct rts51x_chip *chip,
+int rts51x_mspro_format(struct scsi_cmnd *srb, struct rts51x_chip *chip,
int short_data_len, int quick_format)
{
struct ms_info *ms_card = &(chip->ms_card);
@@ -3035,7 +3035,7 @@
ms_card->pro_under_formatting = 0;
ms_card->progress = 0;
ms_card->format_status = FORMAT_SUCCESS;
- set_sense_type(chip, SCSI_LUN(srb), SENSE_TYPE_NO_SENSE);
+ rts51x_set_sense_type(chip, SCSI_LUN(srb), SENSE_TYPE_NO_SENSE);
return STATUS_SUCCESS;
}
@@ -3103,7 +3103,7 @@
rts51x_add_cmd(chip, WRITE_REG_CMD, MS_SECTOR_CNT_H, 0xFF, 0);
rts51x_add_cmd(chip, WRITE_REG_CMD, MS_TPC, 0xFF, READ_PAGE_DATA);
- trans_dma_enable(DMA_FROM_DEVICE, chip, 512 * page_cnt, DMA_512);
+ rts51x_trans_dma_enable(DMA_FROM_DEVICE, chip, 512 * page_cnt, DMA_512);
rts51x_add_cmd(chip, WRITE_REG_CMD, MS_TRANSFER, 0xFF,
MS_TRANSFER_START | MS_TM_MULTI_READ);
@@ -3307,7 +3307,7 @@
rts51x_add_cmd(chip, WRITE_REG_CMD, CARD_DATA_SOURCE, 0x01,
RING_BUFFER);
- trans_dma_enable(DMA_TO_DEVICE, chip, 512 * page_cnt, DMA_512);
+ rts51x_trans_dma_enable(DMA_TO_DEVICE, chip, 512 * page_cnt, DMA_512);
rts51x_add_cmd(chip, WRITE_REG_CMD, MS_TRANSFER, 0xFF,
MS_TRANSFER_START | MS_TM_MULTI_WRITE);
@@ -3467,7 +3467,7 @@
rts51x_add_cmd(chip, WRITE_REG_CMD, MS_TRANS_CFG, 0xFF,
trans_cfg);
- trans_dma_enable(DMA_FROM_DEVICE, chip, 512, DMA_512);
+ rts51x_trans_dma_enable(DMA_FROM_DEVICE, chip, 512, DMA_512);
rts51x_add_cmd(chip, WRITE_REG_CMD, MS_TRANSFER, 0xFF,
MS_TRANSFER_START | MS_TM_NORMAL_READ);
@@ -3670,7 +3670,7 @@
rts51x_add_cmd(chip, WRITE_REG_CMD, MS_TRANS_CFG, 0xFF,
WAIT_INT);
- trans_dma_enable(DMA_TO_DEVICE, chip, 512, DMA_512);
+ rts51x_trans_dma_enable(DMA_TO_DEVICE, chip, 512, DMA_512);
rts51x_add_cmd(chip, WRITE_REG_CMD, MS_TRANSFER, 0xFF,
MS_TRANSFER_START | MS_TM_NORMAL_WRITE);
@@ -3803,10 +3803,10 @@
return STATUS_SUCCESS;
}
-int ms_delay_write(struct rts51x_chip *chip)
+int rts51x_ms_delay_write(struct rts51x_chip *chip)
{
struct ms_info *ms_card = &(chip->ms_card);
- struct ms_delay_write_tag *delay_write = &(ms_card->delay_write);
+ struct rts51x_ms_delay_write_tag *delay_write = &(ms_card->delay_write);
int retval;
if (delay_write->delay_write_flag) {
@@ -3827,16 +3827,16 @@
return STATUS_SUCCESS;
}
-static inline void ms_rw_fail(struct scsi_cmnd *srb, struct rts51x_chip *chip)
+static inline void rts51x_ms_rw_fail(struct scsi_cmnd *srb, struct rts51x_chip *chip)
{
if (srb->sc_data_direction == DMA_FROM_DEVICE)
- set_sense_type(chip, SCSI_LUN(srb),
+ rts51x_set_sense_type(chip, SCSI_LUN(srb),
SENSE_TYPE_MEDIA_UNRECOVER_READ_ERR);
else
- set_sense_type(chip, SCSI_LUN(srb), SENSE_TYPE_MEDIA_WRITE_ERR);
+ rts51x_set_sense_type(chip, SCSI_LUN(srb), SENSE_TYPE_MEDIA_WRITE_ERR);
}
-static int ms_rw_multi_sector(struct scsi_cmnd *srb, struct rts51x_chip *chip,
+static int rts51x_ms_rw_multi_sector(struct scsi_cmnd *srb, struct rts51x_chip *chip,
u32 start_sector, u16 sector_cnt)
{
struct ms_info *ms_card = &(chip->ms_card);
@@ -3847,7 +3847,7 @@
u8 start_page, end_page = 0, page_cnt;
u8 *buf;
void *ptr = NULL;
- struct ms_delay_write_tag *delay_write = &(ms_card->delay_write);
+ struct rts51x_ms_delay_write_tag *delay_write = &(ms_card->delay_write);
ms_set_err_code(chip, MS_NO_ERROR);
@@ -3857,7 +3857,7 @@
retval = ms_switch_clock(chip);
if (retval != STATUS_SUCCESS) {
- ms_rw_fail(srb, chip);
+ rts51x_ms_rw_fail(srb, chip);
TRACE_RET(chip, retval);
}
@@ -3873,7 +3873,7 @@
retval = ms_build_l2p_tbl(chip, seg_no);
if (retval != STATUS_SUCCESS) {
chip->card_fail |= MS_CARD;
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_NOT_PRESENT);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MEDIA_NOT_PRESENT);
TRACE_RET(chip, retval);
}
}
@@ -3898,7 +3898,7 @@
start_page);
#endif
if (retval != STATUS_SUCCESS) {
- set_sense_type(chip, lun,
+ rts51x_set_sense_type(chip, lun,
SENSE_TYPE_MEDIA_WRITE_ERR);
TRACE_RET(chip, retval);
}
@@ -3911,9 +3911,9 @@
old_blk = delay_write->old_phyblock;
new_blk = delay_write->new_phyblock;
} else {
- retval = ms_delay_write(chip);
+ retval = rts51x_ms_delay_write(chip);
if (retval != STATUS_SUCCESS) {
- set_sense_type(chip, lun,
+ rts51x_set_sense_type(chip, lun,
SENSE_TYPE_MEDIA_WRITE_ERR);
TRACE_RET(chip, retval);
}
@@ -3922,7 +3922,7 @@
log_blk - ms_start_idx[seg_no]);
new_blk = ms_get_unused_block(chip, seg_no);
if ((old_blk == 0xFFFF) || (new_blk == 0xFFFF)) {
- set_sense_type(chip, lun,
+ rts51x_set_sense_type(chip, lun,
SENSE_TYPE_MEDIA_WRITE_ERR);
TRACE_RET(chip, STATUS_FAIL);
}
@@ -3933,26 +3933,26 @@
if (retval != STATUS_SUCCESS) {
if (monitor_card_cd(chip, MS_CARD) ==
CD_NOT_EXIST) {
- set_sense_type(chip, lun,
+ rts51x_set_sense_type(chip, lun,
SENSE_TYPE_MEDIA_NOT_PRESENT);
TRACE_RET(chip, STATUS_FAIL);
}
- set_sense_type(chip, lun,
+ rts51x_set_sense_type(chip, lun,
SENSE_TYPE_MEDIA_WRITE_ERR);
TRACE_RET(chip, retval);
}
}
} else {
- retval = ms_delay_write(chip);
+ retval = rts51x_ms_delay_write(chip);
if (retval != STATUS_SUCCESS) {
if (monitor_card_cd(chip, MS_CARD) == CD_NOT_EXIST) {
- set_sense_type(chip, lun,
+ rts51x_set_sense_type(chip, lun,
SENSE_TYPE_MEDIA_NOT_PRESENT);
TRACE_RET(chip, STATUS_FAIL);
}
- set_sense_type(chip, lun,
+ rts51x_set_sense_type(chip, lun,
SENSE_TYPE_MEDIA_UNRECOVER_READ_ERR);
TRACE_RET(chip, retval);
}
@@ -3960,7 +3960,7 @@
ms_get_l2p_tbl(chip, seg_no,
log_blk - ms_start_idx[seg_no]);
if (old_blk == 0xFFFF) {
- set_sense_type(chip, lun,
+ rts51x_set_sense_type(chip, lun,
SENSE_TYPE_MEDIA_UNRECOVER_READ_ERR);
TRACE_RET(chip, STATUS_FAIL);
}
@@ -3993,12 +3993,12 @@
if (retval != STATUS_SUCCESS) {
if (monitor_card_cd(chip, MS_CARD) == CD_NOT_EXIST) {
- set_sense_type(chip, lun,
+ rts51x_set_sense_type(chip, lun,
SENSE_TYPE_MEDIA_NOT_PRESENT);
TRACE_RET(chip, STATUS_FAIL);
}
- ms_rw_fail(srb, chip);
+ rts51x_ms_rw_fail(srb, chip);
TRACE_RET(chip, retval);
}
/* Update L2P table if need */
@@ -4030,7 +4030,7 @@
retval = ms_build_l2p_tbl(chip, seg_no);
if (retval != STATUS_SUCCESS) {
chip->card_fail |= MS_CARD;
- set_sense_type(chip, lun,
+ rts51x_set_sense_type(chip, lun,
SENSE_TYPE_MEDIA_NOT_PRESENT);
TRACE_RET(chip, retval);
}
@@ -4040,14 +4040,14 @@
ms_get_l2p_tbl(chip, seg_no,
log_blk - ms_start_idx[seg_no]);
if (old_blk == 0xFFFF) {
- ms_rw_fail(srb, chip);
+ rts51x_ms_rw_fail(srb, chip);
TRACE_RET(chip, STATUS_FAIL);
}
if (srb->sc_data_direction == DMA_TO_DEVICE) {
new_blk = ms_get_unused_block(chip, seg_no);
if (new_blk == 0xFFFF) {
- ms_rw_fail(srb, chip);
+ rts51x_ms_rw_fail(srb, chip);
TRACE_RET(chip, STATUS_FAIL);
}
}
@@ -4073,7 +4073,7 @@
return STATUS_SUCCESS;
}
-int ms_rw(struct scsi_cmnd *srb, struct rts51x_chip *chip, u32 start_sector,
+int rts51x_ms_rw(struct scsi_cmnd *srb, struct rts51x_chip *chip, u32 start_sector,
u16 sector_cnt)
{
struct ms_info *ms_card = &(chip->ms_card);
@@ -4084,12 +4084,12 @@
mspro_rw_multi_sector(srb, chip, start_sector, sector_cnt);
else
retval =
- ms_rw_multi_sector(srb, chip, start_sector, sector_cnt);
+ rts51x_ms_rw_multi_sector(srb, chip, start_sector, sector_cnt);
return retval;
}
-void ms_free_l2p_tbl(struct rts51x_chip *chip)
+void rts51x_ms_free_l2p_tbl(struct rts51x_chip *chip)
{
struct ms_info *ms_card = &(chip->ms_card);
int i = 0;
@@ -4110,7 +4110,7 @@
}
}
-void ms_cleanup_work(struct rts51x_chip *chip)
+void rts51x_ms_cleanup_work(struct rts51x_chip *chip)
{
struct ms_info *ms_card = &(chip->ms_card);
@@ -4130,7 +4130,7 @@
} else if ((!CHK_MSPRO(ms_card))
&& ms_card->delay_write.delay_write_flag) {
RTS51X_DEBUGP("MS: delay write\n");
- ms_delay_write(chip);
+ rts51x_ms_delay_write(chip);
ms_card->counter = 0;
}
}
@@ -4161,12 +4161,12 @@
return STATUS_SUCCESS;
}
-int release_ms_card(struct rts51x_chip *chip)
+int rts51x_release_ms_card(struct rts51x_chip *chip)
{
struct ms_info *ms_card = &(chip->ms_card);
int retval;
- RTS51X_DEBUGP("release_ms_card\n");
+ RTS51X_DEBUGP("rts51x_release_ms_card\n");
ms_card->delay_write.delay_write_flag = 0;
ms_card->pro_under_formatting = 0;
@@ -4175,7 +4175,7 @@
chip->card_fail &= ~MS_CARD;
chip->card_wp &= ~MS_CARD;
- ms_free_l2p_tbl(chip);
+ rts51x_ms_free_l2p_tbl(chip);
rts51x_write_register(chip, SFSM_ED, HW_CMD_STOP, HW_CMD_STOP);
diff --git a/drivers/staging/rts5139/ms.h b/drivers/staging/rts5139/ms.h
index 0321d06..857c197 100644
--- a/drivers/staging/rts5139/ms.h
+++ b/drivers/staging/rts5139/ms.h
@@ -231,18 +231,18 @@
(((retval) != STATUS_SUCCESS) || \
(chip->rsp_buf[0] & MS_TRANSFER_ERR))
-void mspro_polling_format_status(struct rts51x_chip *chip);
-void mspro_format_sense(struct rts51x_chip *chip, unsigned int lun);
+void rts51x_mspro_polling_format_status(struct rts51x_chip *chip);
+void rts51x_mspro_format_sense(struct rts51x_chip *chip, unsigned int lun);
-int reset_ms_card(struct rts51x_chip *chip);
-int ms_rw(struct scsi_cmnd *srb, struct rts51x_chip *chip, u32 start_sector,
+int rts51x_reset_ms_card(struct rts51x_chip *chip);
+int rts51x_ms_rw(struct scsi_cmnd *srb, struct rts51x_chip *chip, u32 start_sector,
u16 sector_cnt);
-int mspro_format(struct scsi_cmnd *srb, struct rts51x_chip *chip,
+int rts51x_mspro_format(struct scsi_cmnd *srb, struct rts51x_chip *chip,
int short_data_len, int quick_format);
-void ms_free_l2p_tbl(struct rts51x_chip *chip);
-void ms_cleanup_work(struct rts51x_chip *chip);
-int release_ms_card(struct rts51x_chip *chip);
-int ms_delay_write(struct rts51x_chip *chip);
+void rts51x_ms_free_l2p_tbl(struct rts51x_chip *chip);
+void rts51x_ms_cleanup_work(struct rts51x_chip *chip);
+int rts51x_release_ms_card(struct rts51x_chip *chip);
+int rts51x_ms_delay_write(struct rts51x_chip *chip);
#ifdef SUPPORT_MAGIC_GATE
diff --git a/drivers/staging/rts5139/ms_mg.c b/drivers/staging/rts5139/ms_mg.c
index 057d96c..54cfd85 100644
--- a/drivers/staging/rts5139/ms_mg.c
+++ b/drivers/staging/rts5139/ms_mg.c
@@ -119,7 +119,7 @@
* 2. send SET_ID TPC command to medium with Leaf ID released by host
* in this SCSI CMD.
*/
-int mg_set_leaf_id(struct scsi_cmnd *srb, struct rts51x_chip *chip)
+int rts51x_mg_set_leaf_id(struct scsi_cmnd *srb, struct rts51x_chip *chip)
{
int retval;
int i;
@@ -129,10 +129,10 @@
RTS51X_DEBUGP("--%s--\n", __func__);
if (scsi_bufflen(srb) < 12) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
TRACE_RET(chip, STATUS_FAIL);
}
- ms_cleanup_work(chip);
+ rts51x_ms_cleanup_work(chip);
retval = ms_switch_clock(chip);
if (retval != STATUS_SUCCESS)
@@ -140,7 +140,7 @@
retval = mg_send_ex_cmd(chip, MG_SET_LID, 0);
if (retval != STATUS_SUCCESS) {
- set_sense_type(chip, lun, SENSE_TYPE_MG_KEY_FAIL_NOT_ESTAB);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MG_KEY_FAIL_NOT_ESTAB);
TRACE_RET(chip, retval);
}
@@ -151,12 +151,12 @@
retval =
ms_write_bytes(chip, PRO_WRITE_SHORT_DATA, 32, WAIT_INT, buf1, 32);
if (retval != STATUS_SUCCESS) {
- set_sense_type(chip, lun, SENSE_TYPE_MG_KEY_FAIL_NOT_ESTAB);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MG_KEY_FAIL_NOT_ESTAB);
TRACE_RET(chip, retval);
}
retval = mg_check_int_error(chip);
if (retval != STATUS_SUCCESS) {
- set_sense_type(chip, lun, SENSE_TYPE_MG_KEY_FAIL_NOT_ESTAB);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MG_KEY_FAIL_NOT_ESTAB);
TRACE_RET(chip, retval);
}
@@ -170,7 +170,7 @@
* data(1536 bytes totally) from medium by using READ_LONG_DATA TPC
* for 3 times, and report data to host with data-length is 1052 bytes.
*/
-int mg_get_local_EKB(struct scsi_cmnd *srb, struct rts51x_chip *chip)
+int rts51x_mg_get_local_EKB(struct scsi_cmnd *srb, struct rts51x_chip *chip)
{
int retval = STATUS_FAIL;
int bufflen;
@@ -179,7 +179,7 @@
RTS51X_DEBUGP("--%s--\n", __func__);
- ms_cleanup_work(chip);
+ rts51x_ms_cleanup_work(chip);
retval = ms_switch_clock(chip);
if (retval != STATUS_SUCCESS)
@@ -196,21 +196,21 @@
retval = mg_send_ex_cmd(chip, MG_GET_LEKB, 0);
if (retval != STATUS_SUCCESS) {
- set_sense_type(chip, lun, SENSE_TYPE_MG_KEY_FAIL_NOT_AUTHEN);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MG_KEY_FAIL_NOT_AUTHEN);
TRACE_GOTO(chip, GetEKBFinish);
}
retval = ms_transfer_data(chip, MS_TM_AUTO_READ, PRO_READ_LONG_DATA,
3, WAIT_INT, 0, 0, buf + 4, 1536);
if (retval != STATUS_SUCCESS) {
- set_sense_type(chip, lun, SENSE_TYPE_MG_KEY_FAIL_NOT_AUTHEN);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MG_KEY_FAIL_NOT_AUTHEN);
rts51x_write_register(chip, CARD_STOP, MS_STOP | MS_CLR_ERR,
MS_STOP | MS_CLR_ERR);
TRACE_GOTO(chip, GetEKBFinish);
}
retval = mg_check_int_error(chip);
if (retval != STATUS_SUCCESS) {
- set_sense_type(chip, lun, SENSE_TYPE_MG_KEY_FAIL_NOT_AUTHEN);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MG_KEY_FAIL_NOT_AUTHEN);
TRACE_GOTO(chip, GetEKBFinish);
}
@@ -229,7 +229,7 @@
* TPC commands to the medium for writing 8-bytes data as challenge
* by host within a short data packet.
*/
-int mg_chg(struct scsi_cmnd *srb, struct rts51x_chip *chip)
+int rts51x_mg_chg(struct scsi_cmnd *srb, struct rts51x_chip *chip)
{
struct ms_info *ms_card = &(chip->ms_card);
int retval;
@@ -240,7 +240,7 @@
RTS51X_DEBUGP("--%s--\n", __func__);
- ms_cleanup_work(chip);
+ rts51x_ms_cleanup_work(chip);
retval = ms_switch_clock(chip);
if (retval != STATUS_SUCCESS)
@@ -248,19 +248,19 @@
retval = mg_send_ex_cmd(chip, MG_GET_ID, 0);
if (retval != STATUS_SUCCESS) {
- set_sense_type(chip, lun, SENSE_TYPE_MG_INCOMPATIBLE_MEDIUM);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MG_INCOMPATIBLE_MEDIUM);
TRACE_RET(chip, retval);
}
retval =
ms_read_bytes(chip, PRO_READ_SHORT_DATA, 32, WAIT_INT, buf, 32);
if (retval != STATUS_SUCCESS) {
- set_sense_type(chip, lun, SENSE_TYPE_MG_INCOMPATIBLE_MEDIUM);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MG_INCOMPATIBLE_MEDIUM);
TRACE_RET(chip, retval);
}
retval = mg_check_int_error(chip);
if (retval != STATUS_SUCCESS) {
- set_sense_type(chip, lun, SENSE_TYPE_MG_INCOMPATIBLE_MEDIUM);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MG_INCOMPATIBLE_MEDIUM);
TRACE_RET(chip, retval);
}
@@ -276,13 +276,13 @@
}
if (i == 2500) {
- set_sense_type(chip, lun, SENSE_TYPE_MG_INCOMPATIBLE_MEDIUM);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MG_INCOMPATIBLE_MEDIUM);
TRACE_RET(chip, STATUS_FAIL);
}
retval = mg_send_ex_cmd(chip, MG_SET_RD, 0);
if (retval != STATUS_SUCCESS) {
- set_sense_type(chip, lun, SENSE_TYPE_MG_INCOMPATIBLE_MEDIUM);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MG_INCOMPATIBLE_MEDIUM);
TRACE_RET(chip, retval);
}
@@ -296,12 +296,12 @@
retval =
ms_write_bytes(chip, PRO_WRITE_SHORT_DATA, 32, WAIT_INT, buf, 32);
if (retval != STATUS_SUCCESS) {
- set_sense_type(chip, lun, SENSE_TYPE_MG_INCOMPATIBLE_MEDIUM);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MG_INCOMPATIBLE_MEDIUM);
TRACE_RET(chip, retval);
}
retval = mg_check_int_error(chip);
if (retval != STATUS_SUCCESS) {
- set_sense_type(chip, lun, SENSE_TYPE_MG_INCOMPATIBLE_MEDIUM);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MG_INCOMPATIBLE_MEDIUM);
TRACE_RET(chip, retval);
}
@@ -320,7 +320,7 @@
* The paremeter MagicGateID is the one that adapter has obtained from
* the medium by TPC commands in Set Leaf ID command phase previously.
*/
-int mg_get_rsp_chg(struct scsi_cmnd *srb, struct rts51x_chip *chip)
+int rts51x_mg_get_rsp_chg(struct scsi_cmnd *srb, struct rts51x_chip *chip)
{
struct ms_info *ms_card = &(chip->ms_card);
int retval, i;
@@ -330,7 +330,7 @@
RTS51X_DEBUGP("--%s--\n", __func__);
- ms_cleanup_work(chip);
+ rts51x_ms_cleanup_work(chip);
retval = ms_switch_clock(chip);
if (retval != STATUS_SUCCESS)
@@ -338,19 +338,19 @@
retval = mg_send_ex_cmd(chip, MG_MAKE_RMS, 0);
if (retval != STATUS_SUCCESS) {
- set_sense_type(chip, lun, SENSE_TYPE_MG_KEY_FAIL_NOT_AUTHEN);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MG_KEY_FAIL_NOT_AUTHEN);
TRACE_RET(chip, retval);
}
retval =
ms_read_bytes(chip, PRO_READ_SHORT_DATA, 32, WAIT_INT, buf1, 32);
if (retval != STATUS_SUCCESS) {
- set_sense_type(chip, lun, SENSE_TYPE_MG_KEY_FAIL_NOT_AUTHEN);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MG_KEY_FAIL_NOT_AUTHEN);
TRACE_RET(chip, retval);
}
retval = mg_check_int_error(chip);
if (retval != STATUS_SUCCESS) {
- set_sense_type(chip, lun, SENSE_TYPE_MG_KEY_FAIL_NOT_AUTHEN);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MG_KEY_FAIL_NOT_AUTHEN);
TRACE_RET(chip, retval);
}
@@ -375,7 +375,7 @@
}
if (i == 2500) {
- set_sense_type(chip, lun, SENSE_TYPE_MG_KEY_FAIL_NOT_AUTHEN);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MG_KEY_FAIL_NOT_AUTHEN);
TRACE_RET(chip, STATUS_FAIL);
}
@@ -389,7 +389,7 @@
* issues TPC commands to the medium for writing 8-bytes data as
* challenge by host within a short data packet.
*/
-int mg_rsp(struct scsi_cmnd *srb, struct rts51x_chip *chip)
+int rts51x_mg_rsp(struct scsi_cmnd *srb, struct rts51x_chip *chip)
{
struct ms_info *ms_card = &(chip->ms_card);
int retval;
@@ -400,7 +400,7 @@
RTS51X_DEBUGP("--%s--\n", __func__);
- ms_cleanup_work(chip);
+ rts51x_ms_cleanup_work(chip);
retval = ms_switch_clock(chip);
if (retval != STATUS_SUCCESS)
@@ -408,7 +408,7 @@
retval = mg_send_ex_cmd(chip, MG_MAKE_KSE, 0);
if (retval != STATUS_SUCCESS) {
- set_sense_type(chip, lun, SENSE_TYPE_MG_KEY_FAIL_NOT_AUTHEN);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MG_KEY_FAIL_NOT_AUTHEN);
TRACE_RET(chip, retval);
}
@@ -422,12 +422,12 @@
retval =
ms_write_bytes(chip, PRO_WRITE_SHORT_DATA, 32, WAIT_INT, buf, 32);
if (retval != STATUS_SUCCESS) {
- set_sense_type(chip, lun, SENSE_TYPE_MG_KEY_FAIL_NOT_AUTHEN);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MG_KEY_FAIL_NOT_AUTHEN);
TRACE_RET(chip, retval);
}
retval = mg_check_int_error(chip);
if (retval != STATUS_SUCCESS) {
- set_sense_type(chip, lun, SENSE_TYPE_MG_KEY_FAIL_NOT_AUTHEN);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MG_KEY_FAIL_NOT_AUTHEN);
TRACE_RET(chip, retval);
}
@@ -447,7 +447,7 @@
* precedes data transmission from medium to Ring buffer by DMA mechanism
* in order to get maximum performance and minimum code size simultaneously.
*/
-int mg_get_ICV(struct scsi_cmnd *srb, struct rts51x_chip *chip)
+int rts51x_mg_get_ICV(struct scsi_cmnd *srb, struct rts51x_chip *chip)
{
struct ms_info *ms_card = &(chip->ms_card);
int retval;
@@ -457,7 +457,7 @@
RTS51X_DEBUGP("--%s--\n", __func__);
- ms_cleanup_work(chip);
+ rts51x_ms_cleanup_work(chip);
retval = ms_switch_clock(chip);
if (retval != STATUS_SUCCESS)
@@ -474,21 +474,21 @@
retval = mg_send_ex_cmd(chip, MG_GET_IBD, ms_card->mg_entry_num);
if (retval != STATUS_SUCCESS) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_UNRECOVER_READ_ERR);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MEDIA_UNRECOVER_READ_ERR);
TRACE_GOTO(chip, GetICVFinish);
}
retval = ms_transfer_data(chip, MS_TM_AUTO_READ, PRO_READ_LONG_DATA,
2, WAIT_INT, 0, 0, buf + 4, 1024);
if (retval != STATUS_SUCCESS) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_UNRECOVER_READ_ERR);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MEDIA_UNRECOVER_READ_ERR);
rts51x_write_register(chip, CARD_STOP, MS_STOP | MS_CLR_ERR,
MS_STOP | MS_CLR_ERR);
TRACE_GOTO(chip, GetICVFinish);
}
retval = mg_check_int_error(chip);
if (retval != STATUS_SUCCESS) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_UNRECOVER_READ_ERR);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MEDIA_UNRECOVER_READ_ERR);
TRACE_GOTO(chip, GetICVFinish);
}
@@ -511,7 +511,7 @@
* that sent by host, and it should be skipped by shifting DMA pointer
* before writing 1024 bytes to medium.
*/
-int mg_set_ICV(struct scsi_cmnd *srb, struct rts51x_chip *chip)
+int rts51x_mg_set_ICV(struct scsi_cmnd *srb, struct rts51x_chip *chip)
{
struct ms_info *ms_card = &(chip->ms_card);
int retval;
@@ -524,7 +524,7 @@
RTS51X_DEBUGP("--%s--\n", __func__);
- ms_cleanup_work(chip);
+ rts51x_ms_cleanup_work(chip);
retval = ms_switch_clock(chip);
if (retval != STATUS_SUCCESS)
@@ -541,13 +541,13 @@
if (retval != STATUS_SUCCESS) {
if (ms_card->mg_auth == 0) {
if ((buf[5] & 0xC0) != 0)
- set_sense_type(chip, lun,
+ rts51x_set_sense_type(chip, lun,
SENSE_TYPE_MG_KEY_FAIL_NOT_ESTAB);
else
- set_sense_type(chip, lun,
+ rts51x_set_sense_type(chip, lun,
SENSE_TYPE_MG_WRITE_ERR);
} else {
- set_sense_type(chip, lun, SENSE_TYPE_MG_WRITE_ERR);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MG_WRITE_ERR);
}
TRACE_GOTO(chip, SetICVFinish);
}
@@ -563,7 +563,7 @@
rts51x_add_cmd(chip, WRITE_REG_CMD, MS_TRANS_CFG, 0xFF,
WAIT_INT);
- trans_dma_enable(DMA_TO_DEVICE, chip, 512, DMA_512);
+ rts51x_trans_dma_enable(DMA_TO_DEVICE, chip, 512, DMA_512);
rts51x_add_cmd(chip, WRITE_REG_CMD, MS_TRANSFER, 0xFF,
MS_TRANSFER_START | MS_TM_NORMAL_WRITE);
@@ -572,7 +572,7 @@
retval = rts51x_send_cmd(chip, MODE_CDOR, 100);
if (retval != STATUS_SUCCESS) {
- set_sense_type(chip, lun, SENSE_TYPE_MG_WRITE_ERR);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MG_WRITE_ERR);
TRACE_GOTO(chip, SetICVFinish);
}
@@ -583,13 +583,13 @@
rts51x_clear_ms_error(chip);
if (ms_card->mg_auth == 0) {
if ((buf[5] & 0xC0) != 0)
- set_sense_type(chip, lun,
+ rts51x_set_sense_type(chip, lun,
SENSE_TYPE_MG_KEY_FAIL_NOT_ESTAB);
else
- set_sense_type(chip, lun,
+ rts51x_set_sense_type(chip, lun,
SENSE_TYPE_MG_WRITE_ERR);
} else {
- set_sense_type(chip, lun,
+ rts51x_set_sense_type(chip, lun,
SENSE_TYPE_MG_WRITE_ERR);
}
retval = STATUS_FAIL;
@@ -602,13 +602,13 @@
rts51x_clear_ms_error(chip);
if (ms_card->mg_auth == 0) {
if ((buf[5] & 0xC0) != 0)
- set_sense_type(chip, lun,
+ rts51x_set_sense_type(chip, lun,
SENSE_TYPE_MG_KEY_FAIL_NOT_ESTAB);
else
- set_sense_type(chip, lun,
+ rts51x_set_sense_type(chip, lun,
SENSE_TYPE_MG_WRITE_ERR);
} else {
- set_sense_type(chip, lun,
+ rts51x_set_sense_type(chip, lun,
SENSE_TYPE_MG_WRITE_ERR);
}
retval = STATUS_FAIL;
@@ -622,13 +622,13 @@
rts51x_clear_ms_error(chip);
if (ms_card->mg_auth == 0) {
if ((buf[5] & 0xC0) != 0)
- set_sense_type(chip, lun,
+ rts51x_set_sense_type(chip, lun,
SENSE_TYPE_MG_KEY_FAIL_NOT_ESTAB);
else
- set_sense_type(chip, lun,
+ rts51x_set_sense_type(chip, lun,
SENSE_TYPE_MG_WRITE_ERR);
} else {
- set_sense_type(chip, lun, SENSE_TYPE_MG_WRITE_ERR);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MG_WRITE_ERR);
}
TRACE_GOTO(chip, SetICVFinish);
}
diff --git a/drivers/staging/rts5139/ms_mg.h b/drivers/staging/rts5139/ms_mg.h
index e2ca550..d15733a 100644
--- a/drivers/staging/rts5139/ms_mg.h
+++ b/drivers/staging/rts5139/ms_mg.h
@@ -30,12 +30,12 @@
#include "rts51x_chip.h"
#include "ms.h"
-int mg_set_leaf_id(struct scsi_cmnd *srb, struct rts51x_chip *chip);
-int mg_get_local_EKB(struct scsi_cmnd *srb, struct rts51x_chip *chip);
-int mg_chg(struct scsi_cmnd *srb, struct rts51x_chip *chip);
-int mg_get_rsp_chg(struct scsi_cmnd *srb, struct rts51x_chip *chip);
-int mg_rsp(struct scsi_cmnd *srb, struct rts51x_chip *chip);
-int mg_get_ICV(struct scsi_cmnd *srb, struct rts51x_chip *chip);
-int mg_set_ICV(struct scsi_cmnd *srb, struct rts51x_chip *chip);
+int rts51x_mg_set_leaf_id(struct scsi_cmnd *srb, struct rts51x_chip *chip);
+int rts51x_mg_get_local_EKB(struct scsi_cmnd *srb, struct rts51x_chip *chip);
+int rts51x_mg_chg(struct scsi_cmnd *srb, struct rts51x_chip *chip);
+int rts51x_mg_get_rsp_chg(struct scsi_cmnd *srb, struct rts51x_chip *chip);
+int rts51x_mg_rsp(struct scsi_cmnd *srb, struct rts51x_chip *chip);
+int rts51x_mg_get_ICV(struct scsi_cmnd *srb, struct rts51x_chip *chip);
+int rts51x_mg_set_ICV(struct scsi_cmnd *srb, struct rts51x_chip *chip);
#endif /* __RTS51X_MS_MG_H */
diff --git a/drivers/staging/rts5139/rts51x.c b/drivers/staging/rts5139/rts51x.c
index c3fe7dd..0421346 100644
--- a/drivers/staging/rts5139/rts51x.c
+++ b/drivers/staging/rts5139/rts51x.c
@@ -306,7 +306,7 @@
/* we've got a command, let's do it! */
else {
- RTS51X_DEBUG(scsi_show_command(chip->srb));
+ RTS51X_DEBUG(rts51x_scsi_show_command(chip->srb));
rts51x_invoke_transport(chip->srb, chip);
}
@@ -397,7 +397,7 @@
}
#endif
- mspro_polling_format_status(chip);
+ rts51x_mspro_polling_format_status(chip);
/* lock the device pointers */
mutex_lock(&(chip->usb->dev_mutex));
@@ -478,7 +478,7 @@
{
struct rts51x_option *option = &(chip->option);
- option->mspro_formatter_enable = 1;
+ option->rts51x_mspro_formatter_enable = 1;
option->fpga_sd_sdr104_clk = CLK_100;
option->fpga_sd_sdr50_clk = CLK_100;
@@ -510,7 +510,7 @@
option->FT2_fast_mode = 0;
option->pwr_delay = 800;
- option->xd_rw_step = 0;
+ option->rts51x_xd_rw_step = 0;
option->D3318_off_delay = 50;
option->delink_delay = 100;
option->rts5129_D3318_off_enable = 0;
@@ -518,7 +518,7 @@
option->reset_or_rw_fail_set_pad_drive = 1;
option->debounce_num = 2;
option->led_toggle_interval = 6;
- option->xd_rwn_step = 0;
+ option->rts51x_xd_rwn_step = 0;
option->sd_send_status_en = 0;
option->sdr50_tx_phase = 0x01;
option->sdr50_rx_phase = 0x05;
diff --git a/drivers/staging/rts5139/rts51x_card.c b/drivers/staging/rts5139/rts51x_card.c
index 50be42a..509d83e 100644
--- a/drivers/staging/rts5139/rts51x_card.c
+++ b/drivers/staging/rts5139/rts51x_card.c
@@ -41,7 +41,7 @@
#include "sd.h"
#include "ms.h"
-void do_remaining_work(struct rts51x_chip *chip)
+void rts51x_do_remaining_work(struct rts51x_chip *chip)
{
struct sd_info *sd_card = &(chip->sd_card);
struct xd_info *xd_card = &(chip->xd_card);
@@ -84,27 +84,27 @@
}
if (sd_card->counter > POLLING_WAIT_CNT)
- sd_cleanup_work(chip);
+ rts51x_sd_cleanup_work(chip);
if (xd_card->counter > POLLING_WAIT_CNT)
- xd_cleanup_work(chip);
+ rts51x_xd_cleanup_work(chip);
if (ms_card->counter > POLLING_WAIT_CNT)
- ms_cleanup_work(chip);
+ rts51x_ms_cleanup_work(chip);
}
-static void do_reset_xd_card(struct rts51x_chip *chip)
+static void do_rts51x_reset_xd_card(struct rts51x_chip *chip)
{
int retval;
if (chip->card2lun[XD_CARD] >= MAX_ALLOWED_LUN_CNT)
return;
- retval = reset_xd_card(chip);
+ retval = rts51x_reset_xd_card(chip);
if (retval == STATUS_SUCCESS) {
chip->card_ready |= XD_CARD;
chip->card_fail &= ~XD_CARD;
- chip->rw_card[chip->card2lun[XD_CARD]] = xd_rw;
+ chip->rw_card[chip->card2lun[XD_CARD]] = rts51x_xd_rw;
} else {
chip->card_ready &= ~XD_CARD;
chip->card_fail |= XD_CARD;
@@ -120,18 +120,18 @@
}
}
-void do_reset_sd_card(struct rts51x_chip *chip)
+void rts51x_do_rts51x_reset_sd_card(struct rts51x_chip *chip)
{
int retval;
if (chip->card2lun[SD_CARD] >= MAX_ALLOWED_LUN_CNT)
return;
- retval = reset_sd_card(chip);
+ retval = rts51x_reset_sd_card(chip);
if (retval == STATUS_SUCCESS) {
chip->card_ready |= SD_CARD;
chip->card_fail &= ~SD_CARD;
- chip->rw_card[chip->card2lun[SD_CARD]] = sd_rw;
+ chip->rw_card[chip->card2lun[SD_CARD]] = rts51x_sd_rw;
} else {
chip->card_ready &= ~SD_CARD;
chip->card_fail |= SD_CARD;
@@ -147,18 +147,18 @@
}
}
-static void do_reset_ms_card(struct rts51x_chip *chip)
+static void do_rts51x_reset_ms_card(struct rts51x_chip *chip)
{
int retval;
if (chip->card2lun[MS_CARD] >= MAX_ALLOWED_LUN_CNT)
return;
- retval = reset_ms_card(chip);
+ retval = rts51x_reset_ms_card(chip);
if (retval == STATUS_SUCCESS) {
chip->card_ready |= MS_CARD;
chip->card_fail &= ~MS_CARD;
- chip->rw_card[chip->card2lun[MS_CARD]] = ms_rw;
+ chip->rw_card[chip->card2lun[MS_CARD]] = rts51x_ms_rw;
} else {
chip->card_ready &= ~MS_CARD;
chip->card_fail |= MS_CARD;
@@ -301,7 +301,7 @@
chip->card_exist &= ~XD_CARD;
chip->card_ejected = 0;
if (chip->card_ready & XD_CARD) {
- release_xd_card(chip);
+ rts51x_release_xd_card(chip);
chip->rw_card[chip->card2lun[XD_CARD]] = NULL;
clear_bit(chip->card2lun[XD_CARD],
&(chip->lun_mc));
@@ -312,7 +312,7 @@
chip->card_exist &= ~SD_CARD;
chip->card_ejected = 0;
if (chip->card_ready & SD_CARD) {
- release_sd_card(chip);
+ rts51x_release_sd_card(chip);
chip->rw_card[chip->card2lun[SD_CARD]] = NULL;
clear_bit(chip->card2lun[SD_CARD],
&(chip->lun_mc));
@@ -323,7 +323,7 @@
chip->card_exist &= ~MS_CARD;
chip->card_ejected = 0;
if (chip->card_ready & MS_CARD) {
- release_ms_card(chip);
+ rts51x_release_ms_card(chip);
chip->rw_card[chip->card2lun[MS_CARD]] = NULL;
clear_bit(chip->card2lun[MS_CARD],
&(chip->lun_mc));
@@ -339,13 +339,13 @@
if (need_reset & XD_CARD) {
chip->card_exist |= XD_CARD;
- do_reset_xd_card(chip);
+ do_rts51x_reset_xd_card(chip);
} else if (need_reset & SD_CARD) {
chip->card_exist |= SD_CARD;
- do_reset_sd_card(chip);
+ rts51x_do_rts51x_reset_sd_card(chip);
} else if (need_reset & MS_CARD) {
chip->card_exist |= MS_CARD;
- do_reset_ms_card(chip);
+ do_rts51x_reset_ms_card(chip);
}
}
}
@@ -353,20 +353,20 @@
void rts51x_release_cards(struct rts51x_chip *chip)
{
if (chip->card_ready & SD_CARD) {
- sd_cleanup_work(chip);
- release_sd_card(chip);
+ rts51x_sd_cleanup_work(chip);
+ rts51x_release_sd_card(chip);
chip->card_ready &= ~SD_CARD;
}
if (chip->card_ready & XD_CARD) {
- xd_cleanup_work(chip);
- release_xd_card(chip);
+ rts51x_xd_cleanup_work(chip);
+ rts51x_release_xd_card(chip);
chip->card_ready &= ~XD_CARD;
}
if (chip->card_ready & MS_CARD) {
- ms_cleanup_work(chip);
- release_ms_card(chip);
+ rts51x_ms_cleanup_work(chip);
+ rts51x_release_ms_card(chip);
chip->card_ready &= ~MS_CARD;
}
}
@@ -376,7 +376,7 @@
return ((depth > 1) ? (depth - 1) : depth);
}
-int switch_ssc_clock(struct rts51x_chip *chip, int clk)
+int rts51x_switch_ssc_clock(struct rts51x_chip *chip, int clk)
{
struct sd_info *sd_card = &(chip->sd_card);
struct ms_info *ms_card = &(chip->ms_card);
@@ -513,7 +513,7 @@
return STATUS_SUCCESS;
}
-int switch_normal_clock(struct rts51x_chip *chip, int clk)
+int rts51x_switch_normal_clock(struct rts51x_chip *chip, int clk)
{
int retval;
u8 sel, div, mcu_cnt;
@@ -653,7 +653,7 @@
return STATUS_SUCCESS;
}
-int card_rw(struct scsi_cmnd *srb, struct rts51x_chip *chip, u32 sec_addr,
+int rts51x_card_rw(struct scsi_cmnd *srb, struct rts51x_chip *chip, u32 sec_addr,
u16 sec_cnt)
{
int retval;
@@ -688,7 +688,7 @@
return retval;
}
-u8 get_lun_card(struct rts51x_chip *chip, unsigned int lun)
+u8 rts51x_get_lun_card(struct rts51x_chip *chip, unsigned int lun)
{
if ((chip->card_ready & chip->lun2card[lun]) == XD_CARD)
return (u8) XD_CARD;
@@ -744,24 +744,24 @@
return STATUS_SUCCESS;
}
-void eject_card(struct rts51x_chip *chip, unsigned int lun)
+void rts51x_eject_card(struct rts51x_chip *chip, unsigned int lun)
{
RTS51X_DEBUGP("eject card\n");
RTS51X_SET_STAT(chip, STAT_RUN);
- do_remaining_work(chip);
+ rts51x_do_remaining_work(chip);
if ((chip->card_ready & chip->lun2card[lun]) == SD_CARD) {
- release_sd_card(chip);
+ rts51x_release_sd_card(chip);
chip->card_ejected |= SD_CARD;
chip->card_ready &= ~SD_CARD;
chip->capacity[lun] = 0;
} else if ((chip->card_ready & chip->lun2card[lun]) == XD_CARD) {
- release_xd_card(chip);
+ rts51x_release_xd_card(chip);
chip->card_ejected |= XD_CARD;
chip->card_ready &= ~XD_CARD;
chip->capacity[lun] = 0;
} else if ((chip->card_ready & chip->lun2card[lun]) == MS_CARD) {
- release_ms_card(chip);
+ rts51x_release_ms_card(chip);
chip->card_ejected |= MS_CARD;
chip->card_ready &= ~MS_CARD;
chip->capacity[lun] = 0;
@@ -770,7 +770,7 @@
XD_INT | MS_INT | SD_INT);
}
-void trans_dma_enable(enum dma_data_direction dir, struct rts51x_chip *chip,
+void rts51x_trans_dma_enable(enum dma_data_direction dir, struct rts51x_chip *chip,
u32 byte_cnt, u8 pack_size)
{
if (pack_size > DMA_1024)
@@ -798,7 +798,7 @@
}
}
-int enable_card_clock(struct rts51x_chip *chip, u8 card)
+int rts51x_enable_card_clock(struct rts51x_chip *chip, u8 card)
{
u8 clk_en = 0;
@@ -814,7 +814,7 @@
return STATUS_SUCCESS;
}
-int card_power_on(struct rts51x_chip *chip, u8 card)
+int rts51x_card_power_on(struct rts51x_chip *chip, u8 card)
{
u8 mask, val1, val2;
@@ -863,7 +863,7 @@
return CD_NOT_EXIST;
}
-int toggle_gpio(struct rts51x_chip *chip, u8 gpio)
+int rts51x_toggle_gpio(struct rts51x_chip *chip, u8 gpio)
{
int retval;
u8 temp_reg;
@@ -898,7 +898,7 @@
return STATUS_SUCCESS;
}
-int turn_on_led(struct rts51x_chip *chip, u8 gpio)
+int rts51x_turn_on_led(struct rts51x_chip *chip, u8 gpio)
{
int retval;
u8 gpio_oe[4] = {
@@ -917,7 +917,7 @@
return STATUS_SUCCESS;
}
-int turn_off_led(struct rts51x_chip *chip, u8 gpio)
+int rts51x_turn_off_led(struct rts51x_chip *chip, u8 gpio)
{
int retval;
u8 gpio_output[4] = {
diff --git a/drivers/staging/rts5139/rts51x_card.h b/drivers/staging/rts5139/rts51x_card.h
index c5c03cc..e62b25c 100644
--- a/drivers/staging/rts5139/rts51x_card.h
+++ b/drivers/staging/rts5139/rts51x_card.h
@@ -737,24 +737,24 @@
int monitor_card_cd(struct rts51x_chip *chip, u8 card);
-void do_remaining_work(struct rts51x_chip *chip);
-void do_reset_sd_card(struct rts51x_chip *chip);
+void rts51x_do_remaining_work(struct rts51x_chip *chip);
+void rts51x_do_rts51x_reset_sd_card(struct rts51x_chip *chip);
void rts51x_init_cards(struct rts51x_chip *chip);
void rts51x_release_cards(struct rts51x_chip *chip);
-int switch_ssc_clock(struct rts51x_chip *chip, int clk);
-int switch_normal_clock(struct rts51x_chip *chip, int clk);
-int card_rw(struct scsi_cmnd *srb, struct rts51x_chip *chip, u32 sec_addr,
+int rts51x_switch_ssc_clock(struct rts51x_chip *chip, int clk);
+int rts51x_switch_normal_clock(struct rts51x_chip *chip, int clk);
+int rts51x_card_rw(struct scsi_cmnd *srb, struct rts51x_chip *chip, u32 sec_addr,
u16 sec_cnt);
-u8 get_lun_card(struct rts51x_chip *chip, unsigned int lun);
+u8 rts51x_get_lun_card(struct rts51x_chip *chip, unsigned int lun);
int rts51x_select_card(struct rts51x_chip *chip, int card);
-void eject_card(struct rts51x_chip *chip, unsigned int lun);
-void trans_dma_enable(enum dma_data_direction dir, struct rts51x_chip *chip,
+void rts51x_eject_card(struct rts51x_chip *chip, unsigned int lun);
+void rts51x_trans_dma_enable(enum dma_data_direction dir, struct rts51x_chip *chip,
u32 byte_cnt, u8 pack_size);
-int enable_card_clock(struct rts51x_chip *chip, u8 card);
-int card_power_on(struct rts51x_chip *chip, u8 card);
-int toggle_gpio(struct rts51x_chip *chip, u8 gpio);
-int turn_on_led(struct rts51x_chip *chip, u8 gpio);
-int turn_off_led(struct rts51x_chip *chip, u8 gpio);
+int rts51x_enable_card_clock(struct rts51x_chip *chip, u8 card);
+int rts51x_card_power_on(struct rts51x_chip *chip, u8 card);
+int rts51x_toggle_gpio(struct rts51x_chip *chip, u8 gpio);
+int rts51x_turn_on_led(struct rts51x_chip *chip, u8 gpio);
+int rts51x_turn_off_led(struct rts51x_chip *chip, u8 gpio);
static inline int check_card_ready(struct rts51x_chip *chip, unsigned int lun)
{
@@ -830,9 +830,9 @@
int retval = 0;
if (chip->asic_code)
- retval = switch_ssc_clock(chip, clk);
+ retval = rts51x_switch_ssc_clock(chip, clk);
else
- retval = switch_normal_clock(chip, clk);
+ retval = rts51x_switch_normal_clock(chip, clk);
return retval;
}
diff --git a/drivers/staging/rts5139/rts51x_chip.c b/drivers/staging/rts5139/rts51x_chip.c
index 08dcae8..7d7510d 100644
--- a/drivers/staging/rts5139/rts51x_chip.c
+++ b/drivers/staging/rts5139/rts51x_chip.c
@@ -132,7 +132,7 @@
}
#endif
if (chip->option.FT2_fast_mode) {
- card_power_on(chip, SD_CARD | MS_CARD | XD_CARD);
+ rts51x_card_power_on(chip, SD_CARD | MS_CARD | XD_CARD);
wait_timeout(10);
}
@@ -212,8 +212,8 @@
int rts51x_release_chip(struct rts51x_chip *chip)
{
- xd_free_l2p_tbl(chip);
- ms_free_l2p_tbl(chip);
+ rts51x_xd_free_l2p_tbl(chip);
+ rts51x_ms_free_l2p_tbl(chip);
chip->card_ready = 0;
return STATUS_SUCCESS;
}
@@ -227,7 +227,7 @@
chip->led_toggle_counter++;
} else {
chip->led_toggle_counter = 0;
- toggle_gpio(chip, LED_GPIO);
+ rts51x_toggle_gpio(chip, LED_GPIO);
}
}
}
@@ -325,14 +325,14 @@
&& (chip->card_exist &
(SD_CARD | MS_CARD | XD_CARD))
&& (!chip->card_ejected)) {
- turn_on_led(chip, LED_GPIO);
+ rts51x_turn_on_led(chip, LED_GPIO);
} else {
if (chip->rts5179) {
rts51x_ep0_write_register(chip,
CARD_GPIO,
0x03, 0x00);
} else {
- turn_off_led(chip, LED_GPIO);
+ rts51x_turn_off_led(chip, LED_GPIO);
}
}
@@ -353,7 +353,7 @@
switch (RTS51X_GET_STAT(chip)) {
case STAT_RUN:
rts51x_blink_led(chip);
- do_remaining_work(chip);
+ rts51x_do_remaining_work(chip);
break;
case STAT_IDLE:
@@ -707,7 +707,7 @@
if (chip->rts5179)
rts51x_ep0_write_register(chip, CARD_GPIO, 0x03, 0x00);
else
- turn_off_led(chip, LED_GPIO);
+ rts51x_turn_off_led(chip, LED_GPIO);
chip->cur_clk = 0;
chip->card_exist = 0;
@@ -797,7 +797,7 @@
{
struct sd_info *sd_card = &(chip->sd_card);
struct ms_info *ms_card = &(chip->ms_card);
- u8 card = get_lun_card(chip, lun);
+ u8 card = rts51x_get_lun_card(chip, lun);
#ifdef SUPPORT_OC
u8 oc_now_mask = 0, oc_ever_mask = 0;
#endif
@@ -958,9 +958,9 @@
rts51x_status[12] = 0;
/* Detailed Type */
- if (get_lun_card(chip, lun) == XD_CARD) {
+ if (rts51x_get_lun_card(chip, lun) == XD_CARD) {
rts51x_status[13] = 0x40;
- } else if (get_lun_card(chip, lun) == SD_CARD) {
+ } else if (rts51x_get_lun_card(chip, lun) == SD_CARD) {
struct sd_info *sd_card = &(chip->sd_card);
rts51x_status[13] = 0x20;
@@ -976,7 +976,7 @@
if (CHK_MMC_SECTOR_MODE(sd_card))
rts51x_status[13] |= 0x04; /* Hi capacity */
}
- } else if (get_lun_card(chip, lun) == MS_CARD) {
+ } else if (rts51x_get_lun_card(chip, lun) == MS_CARD) {
struct ms_info *ms_card = &(chip->ms_card);
if (CHK_MSPRO(ms_card)) {
diff --git a/drivers/staging/rts5139/rts51x_chip.h b/drivers/staging/rts5139/rts51x_chip.h
index 64257ca..12deb24 100644
--- a/drivers/staging/rts5139/rts51x_chip.h
+++ b/drivers/staging/rts5139/rts51x_chip.h
@@ -253,7 +253,7 @@
#define SUPPORT_UHS50_MMC44 0x40
struct rts51x_option {
- int mspro_formatter_enable;
+ int rts51x_mspro_formatter_enable;
/* card clock expected by user for fpga platform */
int fpga_sd_sdr104_clk;
@@ -308,7 +308,7 @@
* add for config delay between 1/4 PMOS and 3/4 PMOS */
int pwr_delay;
- int xd_rw_step; /* add to tune xd tRP */
+ int rts51x_xd_rw_step; /* add to tune xd tRP */
int D3318_off_delay; /* add to tune D3318 off delay time */
int delink_delay; /* add to tune delink delay time */
/* add for rts5129 to enable/disable D3318 off */
@@ -320,7 +320,7 @@
u8 debounce_num; /* debounce number */
u8 led_toggle_interval; /* used to control led toggle speed */
- int xd_rwn_step;
+ int rts51x_xd_rwn_step;
u8 sd_send_status_en;
/* used to store default phase which is
* used when phase tune all pass. */
@@ -337,11 +337,11 @@
u8 dv18_voltage; /* add to tune dv18 voltage */
};
-#define MS_FORMATTER_ENABLED(chip) ((chip)->option.mspro_formatter_enable)
+#define MS_FORMATTER_ENABLED(chip) ((chip)->option.rts51x_mspro_formatter_enable)
struct rts51x_chip;
-typedef int (*card_rw_func) (struct scsi_cmnd *srb, struct rts51x_chip *chip,
+typedef int (*rts51x_card_rw_func) (struct scsi_cmnd *srb, struct rts51x_chip *chip,
u32 sec_addr, u16 sec_cnt);
/* For MS Card */
@@ -564,7 +564,7 @@
#define CHK_MS8BIT(ms_card) (((ms_card)->ms_type & MS_8BIT))
#define CHK_MS4BIT(ms_card) (((ms_card)->ms_type & MS_4BIT))
-struct ms_delay_write_tag {
+struct rts51x_ms_delay_write_tag {
u16 old_phyblock;
u16 new_phyblock;
u16 logblock;
@@ -605,7 +605,7 @@
u32 total_sec_cnt;
u8 last_rw_int;
- struct ms_delay_write_tag delay_write;
+ struct rts51x_ms_delay_write_tag delay_write;
int counter;
@@ -671,7 +671,7 @@
u32 capacity[MAX_ALLOWED_LUN_CNT];
/* read/write card function pointer */
- card_rw_func rw_card[MAX_ALLOWED_LUN_CNT];
+ rts51x_card_rw_func rw_card[MAX_ALLOWED_LUN_CNT];
/* read/write capacity, used for GPIO Toggle */
u32 rw_cap[MAX_ALLOWED_LUN_CNT];
/* card to lun mapping table */
diff --git a/drivers/staging/rts5139/rts51x_fop.c b/drivers/staging/rts5139/rts51x_fop.c
index bf1a9e6..dee7d8a 100644
--- a/drivers/staging/rts5139/rts51x_fop.c
+++ b/drivers/staging/rts5139/rts51x_fop.c
@@ -70,7 +70,7 @@
switch (dir) {
case 0:
/* No data */
- retval = ext_sd_execute_no_data(chip, chip->card2lun[SD_CARD],
+ retval = ext_rts51x_sd_execute_no_data(chip, chip->card2lun[SD_CARD],
cmd_idx, standby, acmd,
rsp_code, arg);
if (retval != TRANSPORT_GOOD)
@@ -83,7 +83,7 @@
if (!buf)
TRACE_RET(chip, STATUS_NOMEM);
- retval = ext_sd_execute_read_data(chip, chip->card2lun[SD_CARD],
+ retval = ext_rts51x_sd_execute_read_data(chip, chip->card2lun[SD_CARD],
cmd_idx, cmd12, standby, acmd,
rsp_code, arg, len, buf,
cmnd->buf_len, 0);
@@ -117,7 +117,7 @@
}
retval =
- ext_sd_execute_write_data(chip, chip->card2lun[SD_CARD],
+ ext_rts51x_sd_execute_write_data(chip, chip->card2lun[SD_CARD],
cmd_idx, cmd12, standby, acmd,
rsp_code, arg, len, buf,
cmnd->buf_len, 0);
diff --git a/drivers/staging/rts5139/rts51x_scsi.c b/drivers/staging/rts5139/rts51x_scsi.c
index e07a1f4..052911c 100644
--- a/drivers/staging/rts5139/rts51x_scsi.c
+++ b/drivers/staging/rts5139/rts51x_scsi.c
@@ -44,7 +44,7 @@
#include "ms_mg.h"
#include "trace.h"
-void scsi_show_command(struct scsi_cmnd *srb)
+void rts51x_scsi_show_command(struct scsi_cmnd *srb)
{
char *what = NULL;
int i, unknown_cmd = 0;
@@ -333,72 +333,72 @@
}
}
-void set_sense_type(struct rts51x_chip *chip, unsigned int lun, int sense_type)
+void rts51x_set_sense_type(struct rts51x_chip *chip, unsigned int lun, int sense_type)
{
switch (sense_type) {
case SENSE_TYPE_MEDIA_CHANGE:
- set_sense_data(chip, lun, CUR_ERR, 0x06, 0, 0x28, 0, 0, 0);
+ rts51x_set_sense_data(chip, lun, CUR_ERR, 0x06, 0, 0x28, 0, 0, 0);
break;
case SENSE_TYPE_MEDIA_NOT_PRESENT:
- set_sense_data(chip, lun, CUR_ERR, 0x02, 0, 0x3A, 0, 0, 0);
+ rts51x_set_sense_data(chip, lun, CUR_ERR, 0x02, 0, 0x3A, 0, 0, 0);
break;
case SENSE_TYPE_MEDIA_LBA_OVER_RANGE:
- set_sense_data(chip, lun, CUR_ERR, 0x05, 0, 0x21, 0, 0, 0);
+ rts51x_set_sense_data(chip, lun, CUR_ERR, 0x05, 0, 0x21, 0, 0, 0);
break;
case SENSE_TYPE_MEDIA_LUN_NOT_SUPPORT:
- set_sense_data(chip, lun, CUR_ERR, 0x05, 0, 0x25, 0, 0, 0);
+ rts51x_set_sense_data(chip, lun, CUR_ERR, 0x05, 0, 0x25, 0, 0, 0);
break;
case SENSE_TYPE_MEDIA_WRITE_PROTECT:
- set_sense_data(chip, lun, CUR_ERR, 0x07, 0, 0x27, 0, 0, 0);
+ rts51x_set_sense_data(chip, lun, CUR_ERR, 0x07, 0, 0x27, 0, 0, 0);
break;
case SENSE_TYPE_MEDIA_UNRECOVER_READ_ERR:
- set_sense_data(chip, lun, CUR_ERR, 0x03, 0, 0x11, 0, 0, 0);
+ rts51x_set_sense_data(chip, lun, CUR_ERR, 0x03, 0, 0x11, 0, 0, 0);
break;
case SENSE_TYPE_MEDIA_WRITE_ERR:
- set_sense_data(chip, lun, CUR_ERR, 0x03, 0, 0x0C, 0x02, 0, 0);
+ rts51x_set_sense_data(chip, lun, CUR_ERR, 0x03, 0, 0x0C, 0x02, 0, 0);
break;
case SENSE_TYPE_MEDIA_INVALID_CMD_FIELD:
- set_sense_data(chip, lun, CUR_ERR, ILGAL_REQ, 0,
+ rts51x_set_sense_data(chip, lun, CUR_ERR, ILGAL_REQ, 0,
ASC_INVLD_CDB, ASCQ_INVLD_CDB, CDB_ILLEGAL, 1);
break;
case SENSE_TYPE_FORMAT_CMD_FAILED:
- set_sense_data(chip, lun, CUR_ERR, 0x03, 0, 0x31, 0x01, 0, 0);
+ rts51x_set_sense_data(chip, lun, CUR_ERR, 0x03, 0, 0x31, 0x01, 0, 0);
break;
#ifdef SUPPORT_MAGIC_GATE
case SENSE_TYPE_MG_KEY_FAIL_NOT_ESTAB:
- set_sense_data(chip, lun, CUR_ERR, 0x05, 0, 0x6F, 0x02, 0, 0);
+ rts51x_set_sense_data(chip, lun, CUR_ERR, 0x05, 0, 0x6F, 0x02, 0, 0);
break;
case SENSE_TYPE_MG_KEY_FAIL_NOT_AUTHEN:
- set_sense_data(chip, lun, CUR_ERR, 0x05, 0, 0x6F, 0x00, 0, 0);
+ rts51x_set_sense_data(chip, lun, CUR_ERR, 0x05, 0, 0x6F, 0x00, 0, 0);
break;
case SENSE_TYPE_MG_INCOMPATIBLE_MEDIUM:
- set_sense_data(chip, lun, CUR_ERR, 0x02, 0, 0x30, 0x00, 0, 0);
+ rts51x_set_sense_data(chip, lun, CUR_ERR, 0x02, 0, 0x30, 0x00, 0, 0);
break;
case SENSE_TYPE_MG_WRITE_ERR:
- set_sense_data(chip, lun, CUR_ERR, 0x03, 0, 0x0C, 0x00, 0, 0);
+ rts51x_set_sense_data(chip, lun, CUR_ERR, 0x03, 0, 0x0C, 0x00, 0, 0);
break;
#endif
case SENSE_TYPE_NO_SENSE:
default:
- set_sense_data(chip, lun, CUR_ERR, 0, 0, 0, 0, 0, 0);
+ rts51x_set_sense_data(chip, lun, CUR_ERR, 0, 0, 0, 0, 0, 0);
break;
}
}
-void set_sense_data(struct rts51x_chip *chip, unsigned int lun, u8 err_code,
+void rts51x_set_sense_data(struct rts51x_chip *chip, unsigned int lun, u8 err_code,
u8 sense_key, u32 info, u8 asc, u8 ascq, u8 sns_key_info0,
u16 sns_key_info1)
{
@@ -428,13 +428,13 @@
rts51x_init_cards(chip);
if (!check_card_ready(chip, lun)) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_NOT_PRESENT);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MEDIA_NOT_PRESENT);
return TRANSPORT_FAILED;
}
if (!check_lun_mc(chip, lun)) {
set_lun_mc(chip, lun);
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_CHANGE);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MEDIA_CHANGE);
return TRANSPORT_FAILED;
}
@@ -457,7 +457,7 @@
char *inquiry_string;
unsigned char sendbytes;
unsigned char *buf;
- u8 card = get_lun_card(chip, lun);
+ u8 card = rts51x_get_lun_card(chip, lun);
int pro_formatter_flag = 0;
unsigned char inquiry_buf[] = {
QULIFIRE | DRCT_ACCESS_DEV,
@@ -532,7 +532,7 @@
case UNLOAD_MEDIUM:
/* Media shall be unload */
if (check_card_ready(chip, lun))
- eject_card(chip, lun);
+ rts51x_eject_card(chip, lun);
return TRANSPORT_GOOD;
case MAKE_MEDIUM_READY:
@@ -540,7 +540,7 @@
if (check_card_ready(chip, lun)) {
return TRANSPORT_GOOD;
} else {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_NOT_PRESENT);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MEDIA_NOT_PRESENT);
TRACE_RET(chip, TRANSPORT_FAILED);
}
@@ -559,7 +559,7 @@
scsi_set_resid(srb, 0);
if (prevent) {
- set_sense_type(chip, SCSI_LUN(srb),
+ rts51x_set_sense_type(chip, SCSI_LUN(srb),
SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
TRACE_RET(chip, TRANSPORT_FAILED);
}
@@ -663,10 +663,10 @@
int status;
int pro_formatter_flag;
unsigned char pageCode, *buf;
- u8 card = get_lun_card(chip, lun);
+ u8 card = rts51x_get_lun_card(chip, lun);
if (!check_card_ready(chip, lun)) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_NOT_PRESENT);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MEDIA_NOT_PRESENT);
scsi_set_resid(srb, scsi_bufflen(srb));
TRACE_RET(chip, TRANSPORT_FAILED);
}
@@ -678,7 +678,7 @@
if ((get_lun2card(chip, lun) & MS_CARD)) {
if (!card || (card == MS_CARD)) {
dataSize = 108;
- if (chip->option.mspro_formatter_enable)
+ if (chip->option.rts51x_mspro_formatter_enable)
pro_formatter_flag = 1;
}
}
@@ -725,7 +725,7 @@
}
status = TRANSPORT_GOOD;
} else {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
scsi_set_resid(srb, scsi_bufflen(srb));
status = TRANSPORT_FAILED;
}
@@ -749,9 +749,9 @@
sense = &(chip->sense_buffer[lun]);
- if ((get_lun_card(chip, lun) == MS_CARD)
+ if ((rts51x_get_lun_card(chip, lun) == MS_CARD)
&& PRO_UNDER_FORMATTING(ms_card)) {
- mspro_format_sense(chip, lun);
+ rts51x_mspro_format_sense(chip, lun);
}
buf = vmalloc(scsi_bufflen(srb));
@@ -766,7 +766,7 @@
scsi_set_resid(srb, 0);
/* Reset Sense Data */
- set_sense_type(chip, lun, SENSE_TYPE_NO_SENSE);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_NO_SENSE);
return TRANSPORT_GOOD;
}
@@ -778,13 +778,13 @@
u16 sec_cnt;
if (!check_card_ready(chip, lun) || (chip->capacity[lun] == 0)) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_NOT_PRESENT);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MEDIA_NOT_PRESENT);
TRACE_RET(chip, TRANSPORT_FAILED);
}
if (!check_lun_mc(chip, lun)) {
set_lun_mc(chip, lun);
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_CHANGE);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MEDIA_CHANGE);
return TRANSPORT_FAILED;
}
@@ -812,13 +812,13 @@
((u32) srb->cmnd[7]);
sec_cnt = ((u16) (srb->cmnd[9]) << 8) | srb->cmnd[10];
} else {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
TRACE_RET(chip, TRANSPORT_FAILED);
}
if ((start_sec > chip->capacity[lun]) ||
((start_sec + sec_cnt) > chip->capacity[lun])) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_LBA_OVER_RANGE);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MEDIA_LBA_OVER_RANGE);
TRACE_RET(chip, TRANSPORT_FAILED);
}
@@ -830,17 +830,17 @@
if ((srb->sc_data_direction == DMA_TO_DEVICE)
&& check_card_wp(chip, lun)) {
RTS51X_DEBUGP("Write protected card!\n");
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_WRITE_PROTECT);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MEDIA_WRITE_PROTECT);
TRACE_RET(chip, TRANSPORT_FAILED);
}
- retval = card_rw(srb, chip, start_sec, sec_cnt);
+ retval = rts51x_card_rw(srb, chip, start_sec, sec_cnt);
if (retval != STATUS_SUCCESS) {
if (srb->sc_data_direction == DMA_FROM_DEVICE) {
- set_sense_type(chip, lun,
+ rts51x_set_sense_type(chip, lun,
SENSE_TYPE_MEDIA_UNRECOVER_READ_ERR);
} else {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_WRITE_ERR);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MEDIA_WRITE_ERR);
}
TRACE_RET(chip, TRANSPORT_FAILED);
}
@@ -855,13 +855,13 @@
unsigned char *buf;
unsigned int lun = SCSI_LUN(srb);
unsigned int buf_len;
- u8 card = get_lun_card(chip, lun);
+ u8 card = rts51x_get_lun_card(chip, lun);
int desc_cnt;
int i = 0;
if (!check_card_ready(chip, lun)) {
- if (!chip->option.mspro_formatter_enable) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_NOT_PRESENT);
+ if (!chip->option.rts51x_mspro_formatter_enable) {
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MEDIA_NOT_PRESENT);
TRACE_RET(chip, TRANSPORT_FAILED);
}
}
@@ -877,7 +877,7 @@
buf[i++] = 0;
/* Capacity List Length */
- if ((buf_len > 12) && chip->option.mspro_formatter_enable &&
+ if ((buf_len > 12) && chip->option.rts51x_mspro_formatter_enable &&
(chip->lun2card[lun] & MS_CARD) && (!card || (card == MS_CARD))) {
buf[i++] = 0x10;
desc_cnt = 2;
@@ -933,13 +933,13 @@
unsigned int lun = SCSI_LUN(srb);
if (!check_card_ready(chip, lun)) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_NOT_PRESENT);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MEDIA_NOT_PRESENT);
TRACE_RET(chip, TRANSPORT_FAILED);
}
if (!check_lun_mc(chip, lun)) {
set_lun_mc(chip, lun);
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_CHANGE);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MEDIA_CHANGE);
return TRANSPORT_FAILED;
}
@@ -1021,7 +1021,7 @@
retval = rts51x_ep0_read_register(chip, addr + i, buf + i);
if (retval != STATUS_SUCCESS) {
vfree(buf);
- set_sense_type(chip, lun,
+ rts51x_set_sense_type(chip, lun,
SENSE_TYPE_MEDIA_UNRECOVER_READ_ERR);
TRACE_RET(chip, TRANSPORT_FAILED);
}
@@ -1066,7 +1066,7 @@
rts51x_ep0_write_register(chip, addr + i, 0xFF, buf[i]);
if (retval != STATUS_SUCCESS) {
vfree(buf);
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_WRITE_ERR);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MEDIA_WRITE_ERR);
TRACE_RET(chip, TRANSPORT_FAILED);
}
}
@@ -1083,12 +1083,12 @@
unsigned int lun = SCSI_LUN(srb);
if (!check_card_ready(chip, lun)) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_NOT_PRESENT);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MEDIA_NOT_PRESENT);
TRACE_RET(chip, TRANSPORT_FAILED);
}
- if (get_lun_card(chip, lun) != SD_CARD) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_UNRECOVER_READ_ERR);
+ if (rts51x_get_lun_card(chip, lun) != SD_CARD) {
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MEDIA_UNRECOVER_READ_ERR);
TRACE_RET(chip, TRANSPORT_FAILED);
}
@@ -1120,7 +1120,7 @@
rts51x_read_phy_register(chip, addr + i, buf + i);
if (retval != STATUS_SUCCESS) {
vfree(buf);
- set_sense_type(chip, SCSI_LUN(srb),
+ rts51x_set_sense_type(chip, SCSI_LUN(srb),
SENSE_TYPE_MEDIA_UNRECOVER_READ_ERR);
TRACE_RET(chip, TRANSPORT_FAILED);
}
@@ -1163,7 +1163,7 @@
rts51x_write_phy_register(chip, addr + i, buf[i]);
if (retval != STATUS_SUCCESS) {
vfree(buf);
- set_sense_type(chip, SCSI_LUN(srb),
+ rts51x_set_sense_type(chip, SCSI_LUN(srb),
SENSE_TYPE_MEDIA_WRITE_ERR);
TRACE_RET(chip, TRANSPORT_FAILED);
}
@@ -1181,15 +1181,15 @@
u8 card, bus_width;
if (!check_card_ready(chip, lun)) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_NOT_PRESENT);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MEDIA_NOT_PRESENT);
TRACE_RET(chip, TRANSPORT_FAILED);
}
- card = get_lun_card(chip, lun);
+ card = rts51x_get_lun_card(chip, lun);
if ((card == SD_CARD) || (card == MS_CARD)) {
bus_width = chip->card_bus_width[lun];
} else {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_UNRECOVER_READ_ERR);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MEDIA_UNRECOVER_READ_ERR);
TRACE_RET(chip, TRANSPORT_FAILED);
}
@@ -1211,7 +1211,7 @@
((2 + MSG_FUNC_LEN + MSG_FILE_LEN + TIME_VAL_LEN) * TRACE_ITEM_CNT);
if ((scsi_bufflen(srb) < buf_len) || (scsi_sglist(srb) == NULL)) {
- set_sense_type(chip, SCSI_LUN(srb),
+ rts51x_set_sense_type(chip, SCSI_LUN(srb),
SENSE_TYPE_MEDIA_UNRECOVER_READ_ERR);
TRACE_RET(chip, TRANSPORT_FAILED);
}
@@ -1251,7 +1251,7 @@
case ADD_BATCHCMD:
cmd_type = srb->cmnd[4];
if (cmd_type > 2) {
- set_sense_type(chip, lun,
+ rts51x_set_sense_type(chip, lun,
SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
TRACE_RET(chip, TRANSPORT_FAILED);
}
@@ -1274,13 +1274,13 @@
[9]);
retval = rts51x_send_cmd(chip, mode, 1000);
if (retval != STATUS_SUCCESS) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_WRITE_ERR);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MEDIA_WRITE_ERR);
TRACE_RET(chip, TRANSPORT_FAILED);
}
if (mode & STAGE_R) {
retval = rts51x_get_rsp(chip, len, timeout);
if (retval != STATUS_SUCCESS) {
- set_sense_type(chip, lun,
+ rts51x_set_sense_type(chip, lun,
SENSE_TYPE_MEDIA_UNRECOVER_READ_ERR);
TRACE_RET(chip, TRANSPORT_FAILED);
}
@@ -1291,7 +1291,7 @@
idx = srb->cmnd[4];
value = chip->rsp_buf[idx];
if (scsi_bufflen(srb) < 1) {
- set_sense_type(chip, lun,
+ rts51x_set_sense_type(chip, lun,
SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
TRACE_RET(chip, TRANSPORT_FAILED);
}
@@ -1300,12 +1300,12 @@
break;
default:
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
TRACE_RET(chip, TRANSPORT_FAILED);
}
if (retval != STATUS_SUCCESS) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_WRITE_ERR);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MEDIA_WRITE_ERR);
TRACE_RET(chip, TRANSPORT_FAILED);
}
@@ -1357,7 +1357,7 @@
break;
default:
- set_sense_type(chip, SCSI_LUN(srb),
+ rts51x_set_sense_type(chip, SCSI_LUN(srb),
SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
TRACE_RET(chip, TRANSPORT_FAILED);
}
@@ -1401,7 +1401,7 @@
break;
default:
- set_sense_type(chip, SCSI_LUN(srb),
+ rts51x_set_sense_type(chip, SCSI_LUN(srb),
SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
TRACE_RET(chip, TRANSPORT_FAILED);
}
@@ -1415,15 +1415,15 @@
unsigned int lun = SCSI_LUN(srb);
int retval, quick_format;
- if (get_lun_card(chip, lun) != MS_CARD) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_LUN_NOT_SUPPORT);
+ if (rts51x_get_lun_card(chip, lun) != MS_CARD) {
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MEDIA_LUN_NOT_SUPPORT);
TRACE_RET(chip, TRANSPORT_FAILED);
}
if ((srb->cmnd[3] != 0x4D) || (srb->cmnd[4] != 0x47)
|| (srb->cmnd[5] != 0x66) || (srb->cmnd[6] != 0x6D)
|| (srb->cmnd[7] != 0x74)) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
TRACE_RET(chip, TRANSPORT_FAILED);
}
@@ -1433,26 +1433,26 @@
quick_format = 1;
if (!(chip->card_ready & MS_CARD)) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_NOT_PRESENT);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MEDIA_NOT_PRESENT);
TRACE_RET(chip, TRANSPORT_FAILED);
}
if (chip->card_wp & MS_CARD) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_WRITE_PROTECT);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MEDIA_WRITE_PROTECT);
TRACE_RET(chip, TRANSPORT_FAILED);
}
if (!CHK_MSPRO(ms_card)) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_LUN_NOT_SUPPORT);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MEDIA_LUN_NOT_SUPPORT);
TRACE_RET(chip, TRANSPORT_FAILED);
}
rts51x_prepare_run(chip);
RTS51X_SET_STAT(chip, STAT_RUN);
- retval = mspro_format(srb, chip, MS_SHORT_DATA_LEN, quick_format);
+ retval = rts51x_mspro_format(srb, chip, MS_SHORT_DATA_LEN, quick_format);
if (retval != STATUS_SUCCESS) {
- set_sense_type(chip, lun, SENSE_TYPE_FORMAT_CMD_FAILED);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_FORMAT_CMD_FAILED);
TRACE_RET(chip, TRANSPORT_FAILED);
}
@@ -1471,18 +1471,18 @@
int i;
if (!check_card_ready(chip, lun)) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_NOT_PRESENT);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MEDIA_NOT_PRESENT);
TRACE_RET(chip, TRANSPORT_FAILED);
}
- if ((get_lun_card(chip, lun) != MS_CARD)) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_LUN_NOT_SUPPORT);
+ if ((rts51x_get_lun_card(chip, lun) != MS_CARD)) {
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MEDIA_LUN_NOT_SUPPORT);
TRACE_RET(chip, TRANSPORT_FAILED);
}
if ((srb->cmnd[2] != 0xB0) || (srb->cmnd[4] != 0x4D) ||
(srb->cmnd[5] != 0x53) || (srb->cmnd[6] != 0x49) ||
(srb->cmnd[7] != 0x44)) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
TRACE_RET(chip, TRANSPORT_FAILED);
}
@@ -1490,7 +1490,7 @@
if ((CHK_MSXC(ms_card) && (dev_info_id == 0x10)) ||
(!CHK_MSXC(ms_card) && (dev_info_id == 0x13)) ||
!CHK_MSPRO(ms_card)) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
TRACE_RET(chip, TRANSPORT_FAILED);
}
@@ -1576,44 +1576,44 @@
rts51x_prepare_run(chip);
RTS51X_SET_STAT(chip, STAT_RUN);
- sd_cleanup_work(chip);
+ rts51x_sd_cleanup_work(chip);
if (!check_card_ready(chip, lun)) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_NOT_PRESENT);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MEDIA_NOT_PRESENT);
TRACE_RET(chip, TRANSPORT_FAILED);
}
- if ((get_lun_card(chip, lun) != SD_CARD)) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_LUN_NOT_SUPPORT);
+ if ((rts51x_get_lun_card(chip, lun) != SD_CARD)) {
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MEDIA_LUN_NOT_SUPPORT);
TRACE_RET(chip, TRANSPORT_FAILED);
}
switch (srb->cmnd[0]) {
case SD_PASS_THRU_MODE:
- result = sd_pass_thru_mode(srb, chip);
+ result = rts51x_sd_pass_thru_mode(srb, chip);
break;
case SD_EXECUTE_NO_DATA:
- result = sd_execute_no_data(srb, chip);
+ result = rts51x_sd_execute_no_data(srb, chip);
break;
case SD_EXECUTE_READ:
- result = sd_execute_read_data(srb, chip);
+ result = rts51x_sd_execute_read_data(srb, chip);
break;
case SD_EXECUTE_WRITE:
- result = sd_execute_write_data(srb, chip);
+ result = rts51x_sd_execute_write_data(srb, chip);
break;
case SD_GET_RSP:
- result = sd_get_cmd_rsp(srb, chip);
+ result = rts51x_sd_get_cmd_rsp(srb, chip);
break;
case SD_HW_RST:
- result = sd_hw_rst(srb, chip);
+ result = rts51x_sd_hw_rst(srb, chip);
break;
default:
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
TRACE_RET(chip, TRANSPORT_FAILED);
}
@@ -1632,24 +1632,24 @@
rts51x_prepare_run(chip);
RTS51X_SET_STAT(chip, STAT_RUN);
- ms_cleanup_work(chip);
+ rts51x_ms_cleanup_work(chip);
if (!check_card_ready(chip, lun)) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_NOT_PRESENT);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MEDIA_NOT_PRESENT);
TRACE_RET(chip, TRANSPORT_FAILED);
}
- if ((get_lun_card(chip, lun) != MS_CARD)) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_LUN_NOT_SUPPORT);
+ if ((rts51x_get_lun_card(chip, lun) != MS_CARD)) {
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MEDIA_LUN_NOT_SUPPORT);
TRACE_RET(chip, TRANSPORT_FAILED);
}
if (srb->cmnd[7] != KC_MG_R_PRO) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
TRACE_RET(chip, TRANSPORT_FAILED);
}
if (!CHK_MSPRO(ms_card)) {
- set_sense_type(chip, lun, SENSE_TYPE_MG_INCOMPATIBLE_MEDIUM);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MG_INCOMPATIBLE_MEDIUM);
TRACE_RET(chip, TRANSPORT_FAILED);
}
@@ -1659,11 +1659,11 @@
case KF_GET_LOC_EKB:
if ((scsi_bufflen(srb) == 0x41C) &&
(srb->cmnd[8] == 0x04) && (srb->cmnd[9] == 0x1C)) {
- retval = mg_get_local_EKB(srb, chip);
+ retval = rts51x_mg_get_local_EKB(srb, chip);
if (retval != STATUS_SUCCESS)
TRACE_RET(chip, TRANSPORT_FAILED);
} else {
- set_sense_type(chip, lun,
+ rts51x_set_sense_type(chip, lun,
SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
TRACE_RET(chip, TRANSPORT_FAILED);
}
@@ -1672,11 +1672,11 @@
case KF_RSP_CHG:
if ((scsi_bufflen(srb) == 0x24) &&
(srb->cmnd[8] == 0x00) && (srb->cmnd[9] == 0x24)) {
- retval = mg_get_rsp_chg(srb, chip);
+ retval = rts51x_mg_get_rsp_chg(srb, chip);
if (retval != STATUS_SUCCESS)
TRACE_RET(chip, TRANSPORT_FAILED);
} else {
- set_sense_type(chip, lun,
+ rts51x_set_sense_type(chip, lun,
SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
TRACE_RET(chip, TRANSPORT_FAILED);
}
@@ -1690,18 +1690,18 @@
(srb->cmnd[2] == 0x00) &&
(srb->cmnd[3] == 0x00) &&
(srb->cmnd[4] == 0x00) && (srb->cmnd[5] < 32)) {
- retval = mg_get_ICV(srb, chip);
+ retval = rts51x_mg_get_ICV(srb, chip);
if (retval != STATUS_SUCCESS)
TRACE_RET(chip, TRANSPORT_FAILED);
} else {
- set_sense_type(chip, lun,
+ rts51x_set_sense_type(chip, lun,
SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
TRACE_RET(chip, TRANSPORT_FAILED);
}
break;
default:
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
TRACE_RET(chip, TRANSPORT_FAILED);
}
@@ -1719,28 +1719,28 @@
rts51x_prepare_run(chip);
RTS51X_SET_STAT(chip, STAT_RUN);
- ms_cleanup_work(chip);
+ rts51x_ms_cleanup_work(chip);
if (!check_card_ready(chip, lun)) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_NOT_PRESENT);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MEDIA_NOT_PRESENT);
TRACE_RET(chip, TRANSPORT_FAILED);
}
if (check_card_wp(chip, lun)) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_WRITE_PROTECT);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MEDIA_WRITE_PROTECT);
TRACE_RET(chip, TRANSPORT_FAILED);
}
- if ((get_lun_card(chip, lun) != MS_CARD)) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_LUN_NOT_SUPPORT);
+ if ((rts51x_get_lun_card(chip, lun) != MS_CARD)) {
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MEDIA_LUN_NOT_SUPPORT);
TRACE_RET(chip, TRANSPORT_FAILED);
}
if (srb->cmnd[7] != KC_MG_R_PRO) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
TRACE_RET(chip, TRANSPORT_FAILED);
}
if (!CHK_MSPRO(ms_card)) {
- set_sense_type(chip, lun, SENSE_TYPE_MG_INCOMPATIBLE_MEDIUM);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MG_INCOMPATIBLE_MEDIUM);
TRACE_RET(chip, TRANSPORT_FAILED);
}
@@ -1750,11 +1750,11 @@
case KF_SET_LEAF_ID:
if ((scsi_bufflen(srb) == 0x0C) &&
(srb->cmnd[8] == 0x00) && (srb->cmnd[9] == 0x0C)) {
- retval = mg_set_leaf_id(srb, chip);
+ retval = rts51x_mg_set_leaf_id(srb, chip);
if (retval != STATUS_SUCCESS)
TRACE_RET(chip, TRANSPORT_FAILED);
} else {
- set_sense_type(chip, lun,
+ rts51x_set_sense_type(chip, lun,
SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
TRACE_RET(chip, TRANSPORT_FAILED);
}
@@ -1763,11 +1763,11 @@
case KF_CHG_HOST:
if ((scsi_bufflen(srb) == 0x0C) &&
(srb->cmnd[8] == 0x00) && (srb->cmnd[9] == 0x0C)) {
- retval = mg_chg(srb, chip);
+ retval = rts51x_mg_chg(srb, chip);
if (retval != STATUS_SUCCESS)
TRACE_RET(chip, TRANSPORT_FAILED);
} else {
- set_sense_type(chip, lun,
+ rts51x_set_sense_type(chip, lun,
SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
TRACE_RET(chip, TRANSPORT_FAILED);
}
@@ -1776,11 +1776,11 @@
case KF_RSP_HOST:
if ((scsi_bufflen(srb) == 0x0C) &&
(srb->cmnd[8] == 0x00) && (srb->cmnd[9] == 0x0C)) {
- retval = mg_rsp(srb, chip);
+ retval = rts51x_mg_rsp(srb, chip);
if (retval != STATUS_SUCCESS)
TRACE_RET(chip, TRANSPORT_FAILED);
} else {
- set_sense_type(chip, lun,
+ rts51x_set_sense_type(chip, lun,
SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
TRACE_RET(chip, TRANSPORT_FAILED);
}
@@ -1794,18 +1794,18 @@
(srb->cmnd[2] == 0x00) &&
(srb->cmnd[3] == 0x00) &&
(srb->cmnd[4] == 0x00) && (srb->cmnd[5] < 32)) {
- retval = mg_set_ICV(srb, chip);
+ retval = rts51x_mg_set_ICV(srb, chip);
if (retval != STATUS_SUCCESS)
TRACE_RET(chip, TRANSPORT_FAILED);
} else {
- set_sense_type(chip, lun,
+ rts51x_set_sense_type(chip, lun,
SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
TRACE_RET(chip, TRANSPORT_FAILED);
}
break;
default:
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
TRACE_RET(chip, TRANSPORT_FAILED);
}
@@ -1820,12 +1820,12 @@
unsigned int lun = SCSI_LUN(srb);
int result = TRANSPORT_GOOD;
- if ((get_lun_card(chip, lun) == MS_CARD) &&
+ if ((rts51x_get_lun_card(chip, lun) == MS_CARD) &&
(ms_card->format_status == FORMAT_IN_PROGRESS)) {
if ((srb->cmnd[0] != REQUEST_SENSE)
&& (srb->cmnd[0] != INQUIRY)) {
/* Logical Unit Not Ready Format in Progress */
- set_sense_data(chip, lun, CUR_ERR, 0x02, 0, 0x04, 0x04,
+ rts51x_set_sense_data(chip, lun, CUR_ERR, 0x02, 0, 0x04, 0x04,
0, (u16) (ms_card->progress));
TRACE_RET(chip, TRANSPORT_FAILED);
}
@@ -1908,7 +1908,7 @@
break;
default:
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
result = TRANSPORT_FAILED;
}
diff --git a/drivers/staging/rts5139/rts51x_scsi.h b/drivers/staging/rts5139/rts51x_scsi.h
index 9042bc9..cdfe550 100644
--- a/drivers/staging/rts5139/rts51x_scsi.h
+++ b/drivers/staging/rts5139/rts51x_scsi.h
@@ -133,9 +133,9 @@
#define SCSI 0x00 /* Interface ID */
-void scsi_show_command(struct scsi_cmnd *srb);
-void set_sense_type(struct rts51x_chip *chip, unsigned int lun, int sense_type);
-void set_sense_data(struct rts51x_chip *chip, unsigned int lun, u8 err_code,
+void rts51x_scsi_show_command(struct scsi_cmnd *srb);
+void rts51x_set_sense_type(struct rts51x_chip *chip, unsigned int lun, int sense_type);
+void rts51x_set_sense_data(struct rts51x_chip *chip, unsigned int lun, u8 err_code,
u8 sense_key, u32 info, u8 asc, u8 ascq, u8 sns_key_info0,
u16 sns_key_info1);
diff --git a/drivers/staging/rts5139/sd.c b/drivers/staging/rts5139/sd.c
index b739f26..4283b09 100644
--- a/drivers/staging/rts5139/sd.c
+++ b/drivers/staging/rts5139/sd.c
@@ -680,7 +680,7 @@
return STATUS_SUCCESS;
}
-int sd_select_card(struct rts51x_chip *chip, int select)
+int rts51x_sd_select_card(struct rts51x_chip *chip, int select)
{
struct sd_info *sd_card = &(chip->sd_card);
int retval;
@@ -1747,7 +1747,7 @@
return STATUS_SUCCESS;
}
-int sd_switch_clock(struct rts51x_chip *chip)
+int rts51x_sd_switch_clock(struct rts51x_chip *chip)
{
struct sd_info *sd_card = &(chip->sd_card);
int retval;
@@ -1913,7 +1913,7 @@
#endif
/* Power on card */
- retval = card_power_on(chip, SD_CARD);
+ retval = rts51x_card_power_on(chip, SD_CARD);
if (retval != STATUS_SUCCESS)
TRACE_RET(chip, retval);
@@ -2139,7 +2139,7 @@
if (retval != STATUS_SUCCESS)
TRACE_RET(chip, retval);
/* Select SD card */
- retval = sd_select_card(chip, 1);
+ retval = rts51x_sd_select_card(chip, 1);
if (retval != STATUS_SUCCESS)
TRACE_RET(chip, retval);
@@ -2656,7 +2656,7 @@
spec_ver = (sd_card->raw_csd[0] & 0x3C) >> 2;
/* Select MMC card */
- retval = sd_select_card(chip, 1);
+ retval = rts51x_sd_select_card(chip, 1);
if (retval != STATUS_SUCCESS)
TRACE_RET(chip, retval);
@@ -2748,7 +2748,7 @@
return STATUS_SUCCESS;
}
-int reset_sd_card(struct rts51x_chip *chip)
+int rts51x_reset_sd_card(struct rts51x_chip *chip)
{
struct sd_info *sd_card = &(chip->sd_card);
int retval;
@@ -2764,7 +2764,7 @@
sd_card->sd_switch_fail = 0;
sd_clear_reset_fail(chip);
- enable_card_clock(chip, SD_CARD);
+ rts51x_enable_card_clock(chip, SD_CARD);
sd_init_power(chip);
@@ -2891,7 +2891,7 @@
int retval;
if (sd_card->seq_mode) {
- retval = sd_switch_clock(chip);
+ retval = rts51x_sd_switch_clock(chip);
if (retval != STATUS_SUCCESS)
return;
@@ -2923,14 +2923,14 @@
sd_card->sd_clock = CLK_50;
}
- retval = sd_switch_clock(chip);
+ retval = rts51x_sd_switch_clock(chip);
if (retval != STATUS_SUCCESS)
TRACE_RET(chip, retval);
return STATUS_SUCCESS;
}
-int sd_rw(struct scsi_cmnd *srb, struct rts51x_chip *chip, u32 start_sector,
+int rts51x_sd_rw(struct scsi_cmnd *srb, struct rts51x_chip *chip, u32 start_sector,
u16 sector_cnt)
{
struct sd_info *sd_card = &(chip->sd_card);
@@ -2947,11 +2947,11 @@
else
data_addr = start_sector;
- RTS51X_DEBUGP("sd_rw, data_addr = 0x%x\n", data_addr);
+ RTS51X_DEBUGP("rts51x_sd_rw, data_addr = 0x%x\n", data_addr);
sd_clr_err_code(chip);
- retval = sd_switch_clock(chip);
+ retval = rts51x_sd_switch_clock(chip);
if (retval != STATUS_SUCCESS)
TRACE_RET(chip, retval);
@@ -3020,7 +3020,7 @@
SD_NO_WAIT_BUSY_END | SD_NO_CHECK_CRC7 |
SD_RSP_LEN_0);
- trans_dma_enable(srb->sc_data_direction, chip, sector_cnt * 512,
+ rts51x_trans_dma_enable(srb->sc_data_direction, chip, sector_cnt * 512,
DMA_512);
if (srb->sc_data_direction == DMA_FROM_DEVICE) {
@@ -3058,7 +3058,7 @@
SD_NO_WAIT_BUSY_END | SD_CHECK_CRC7 |
SD_RSP_LEN_6);
- trans_dma_enable(srb->sc_data_direction, chip,
+ rts51x_trans_dma_enable(srb->sc_data_direction, chip,
sector_cnt * 512, DMA_512);
rts51x_add_cmd(chip, WRITE_REG_CMD, SD_TRANSFER, 0xFF,
@@ -3099,7 +3099,7 @@
SD_NO_WAIT_BUSY_END | SD_NO_CHECK_CRC7 |
SD_RSP_LEN_0);
- trans_dma_enable(srb->sc_data_direction, chip,
+ rts51x_trans_dma_enable(srb->sc_data_direction, chip,
sector_cnt * 512, DMA_512);
rts51x_add_cmd(chip, WRITE_REG_CMD, SD_TRANSFER, 0xFF,
@@ -3168,7 +3168,7 @@
return STATUS_SUCCESS;
}
-void sd_cleanup_work(struct rts51x_chip *chip)
+void rts51x_sd_cleanup_work(struct rts51x_chip *chip)
{
struct sd_info *sd_card = &(chip->sd_card);
@@ -3220,12 +3220,12 @@
return STATUS_SUCCESS;
}
-int release_sd_card(struct rts51x_chip *chip)
+int rts51x_release_sd_card(struct rts51x_chip *chip)
{
struct sd_info *sd_card = &(chip->sd_card);
int retval;
- RTS51X_DEBUGP("release_sd_card\n");
+ RTS51X_DEBUGP("rts51x_release_sd_card\n");
chip->card_ready &= ~SD_CARD;
chip->card_fail &= ~SD_CARD;
diff --git a/drivers/staging/rts5139/sd.h b/drivers/staging/rts5139/sd.h
index de155d8..7dd943f5 100644
--- a/drivers/staging/rts5139/sd.h
+++ b/drivers/staging/rts5139/sd.h
@@ -256,13 +256,13 @@
int len;
};
-int sd_select_card(struct rts51x_chip *chip, int select);
-int reset_sd_card(struct rts51x_chip *chip);
-int sd_switch_clock(struct rts51x_chip *chip);
-int sd_rw(struct scsi_cmnd *srb, struct rts51x_chip *chip, u32 start_sector,
+int rts51x_sd_select_card(struct rts51x_chip *chip, int select);
+int rts51x_reset_sd_card(struct rts51x_chip *chip);
+int rts51x_sd_switch_clock(struct rts51x_chip *chip);
+int rts51x_sd_rw(struct scsi_cmnd *srb, struct rts51x_chip *chip, u32 start_sector,
u16 sector_cnt);
-void sd_cleanup_work(struct rts51x_chip *chip);
-int release_sd_card(struct rts51x_chip *chip);
+void rts51x_sd_cleanup_work(struct rts51x_chip *chip);
+int rts51x_release_sd_card(struct rts51x_chip *chip);
#ifdef SUPPORT_CPRM
extern int reset_sd(struct rts51x_chip *chip);
diff --git a/drivers/staging/rts5139/sd_cprm.c b/drivers/staging/rts5139/sd_cprm.c
index 0167f7f..d468983 100644
--- a/drivers/staging/rts5139/sd_cprm.c
+++ b/drivers/staging/rts5139/sd_cprm.c
@@ -269,7 +269,7 @@
return STATUS_SUCCESS;
}
-int ext_sd_execute_no_data(struct rts51x_chip *chip, unsigned int lun,
+int ext_rts51x_sd_execute_no_data(struct rts51x_chip *chip, unsigned int lun,
u8 cmd_idx, u8 standby, u8 acmd, u8 rsp_code,
u32 arg)
{
@@ -277,30 +277,30 @@
int retval, rsp_len;
u8 rsp_type;
- retval = sd_switch_clock(chip);
+ retval = rts51x_sd_switch_clock(chip);
if (retval != STATUS_SUCCESS)
TRACE_RET(chip, TRANSPORT_FAILED);
if (sd_card->pre_cmd_err) {
sd_card->pre_cmd_err = 0;
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_CHANGE);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MEDIA_CHANGE);
TRACE_RET(chip, TRANSPORT_FAILED);
}
retval = get_rsp_type(rsp_code, &rsp_type, &rsp_len);
if (retval != STATUS_SUCCESS) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
TRACE_RET(chip, TRANSPORT_FAILED);
}
sd_card->last_rsp_type = rsp_type;
- retval = sd_switch_clock(chip);
+ retval = rts51x_sd_switch_clock(chip);
if (retval != STATUS_SUCCESS)
TRACE_RET(chip, TRANSPORT_FAILED);
/* Set H/W SD/MMC Bus Width */
rts51x_write_register(chip, SD_CFG1, 0x03, SD_BUS_WIDTH_4);
if (standby) {
- retval = sd_select_card(chip, 0);
+ retval = rts51x_sd_select_card(chip, 0);
if (retval != STATUS_SUCCESS)
TRACE_GOTO(chip, SD_Execute_Cmd_Failed);
}
@@ -319,7 +319,7 @@
TRACE_GOTO(chip, SD_Execute_Cmd_Failed);
if (standby) {
- retval = sd_select_card(chip, 1);
+ retval = rts51x_sd_select_card(chip, 1);
if (retval != STATUS_SUCCESS)
TRACE_GOTO(chip, SD_Execute_Cmd_Failed);
}
@@ -328,16 +328,16 @@
SD_Execute_Cmd_Failed:
sd_card->pre_cmd_err = 1;
- set_sense_type(chip, lun, SENSE_TYPE_NO_SENSE);
- release_sd_card(chip);
- do_reset_sd_card(chip);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_NO_SENSE);
+ rts51x_release_sd_card(chip);
+ rts51x_do_rts51x_reset_sd_card(chip);
if (!(chip->card_ready & SD_CARD))
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_NOT_PRESENT);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MEDIA_NOT_PRESENT);
TRACE_RET(chip, TRANSPORT_FAILED);
}
-int ext_sd_execute_read_data(struct rts51x_chip *chip, unsigned int lun,
+int ext_rts51x_sd_execute_read_data(struct rts51x_chip *chip, unsigned int lun,
u8 cmd_idx, u8 cmd12, u8 standby,
u8 acmd, u8 rsp_code, u32 arg, u32 data_len,
void *data_buf, unsigned int buf_len, int use_sg)
@@ -349,21 +349,21 @@
if (sd_card->pre_cmd_err) {
sd_card->pre_cmd_err = 0;
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_CHANGE);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MEDIA_CHANGE);
TRACE_RET(chip, TRANSPORT_FAILED);
}
- retval = sd_switch_clock(chip);
+ retval = rts51x_sd_switch_clock(chip);
if (retval != STATUS_SUCCESS)
TRACE_RET(chip, STATUS_FAIL);
retval = get_rsp_type(rsp_code, &rsp_type, &rsp_len);
if (retval != STATUS_SUCCESS) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
TRACE_RET(chip, TRANSPORT_FAILED);
}
sd_card->last_rsp_type = rsp_type;
- retval = sd_switch_clock(chip);
+ retval = rts51x_sd_switch_clock(chip);
if (retval != STATUS_SUCCESS)
TRACE_RET(chip, TRANSPORT_FAILED);
bus_width = SD_BUS_WIDTH_4;
@@ -376,7 +376,7 @@
}
if (standby) {
- retval = sd_select_card(chip, 0);
+ retval = rts51x_sd_select_card(chip, 0);
if (retval != STATUS_SUCCESS)
TRACE_GOTO(chip, SD_Execute_Read_Cmd_Failed);
}
@@ -448,7 +448,7 @@
rts51x_add_cmd(chip, WRITE_REG_CMD, SD_CMD4, 0xFF, (u8) arg);
rts51x_add_cmd(chip, WRITE_REG_CMD, SD_CFG1, 0x03, bus_width);
rts51x_add_cmd(chip, WRITE_REG_CMD, SD_CFG2, 0xFF, rsp_type);
- trans_dma_enable(DMA_FROM_DEVICE, chip, data_len, DMA_512);
+ rts51x_trans_dma_enable(DMA_FROM_DEVICE, chip, data_len, DMA_512);
rts51x_add_cmd(chip, WRITE_REG_CMD, SD_TRANSFER, 0xFF,
SD_TM_AUTO_READ_2 | SD_TRANSFER_START);
rts51x_add_cmd(chip, CHECK_REG_CMD, SD_TRANSFER,
@@ -490,7 +490,7 @@
TRACE_GOTO(chip, SD_Execute_Read_Cmd_Failed);
if (standby) {
- retval = sd_select_card(chip, 1);
+ retval = rts51x_sd_select_card(chip, 1);
if (retval != STATUS_SUCCESS)
TRACE_GOTO(chip, SD_Execute_Read_Cmd_Failed);
}
@@ -531,18 +531,18 @@
SD_Execute_Read_Cmd_Failed:
sd_card->pre_cmd_err = 1;
- set_sense_type(chip, lun, SENSE_TYPE_NO_SENSE);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_NO_SENSE);
if (read_err)
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_UNRECOVER_READ_ERR);
- release_sd_card(chip);
- do_reset_sd_card(chip);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MEDIA_UNRECOVER_READ_ERR);
+ rts51x_release_sd_card(chip);
+ rts51x_do_rts51x_reset_sd_card(chip);
if (!(chip->card_ready & SD_CARD))
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_NOT_PRESENT);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MEDIA_NOT_PRESENT);
TRACE_RET(chip, TRANSPORT_FAILED);
}
-int ext_sd_execute_write_data(struct rts51x_chip *chip, unsigned int lun,
+int ext_rts51x_sd_execute_write_data(struct rts51x_chip *chip, unsigned int lun,
u8 cmd_idx, u8 cmd12, u8 standby, u8 acmd,
u8 rsp_code, u32 arg, u32 data_len,
void *data_buf, unsigned int buf_len, int use_sg)
@@ -555,22 +555,22 @@
if (sd_card->pre_cmd_err) {
sd_card->pre_cmd_err = 0;
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_CHANGE);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MEDIA_CHANGE);
TRACE_RET(chip, TRANSPORT_FAILED);
}
- retval = sd_switch_clock(chip);
+ retval = rts51x_sd_switch_clock(chip);
if (retval != STATUS_SUCCESS)
TRACE_RET(chip, STATUS_FAIL);
retval = get_rsp_type(rsp_code, &rsp_type, &rsp_len);
if (retval != STATUS_SUCCESS) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
TRACE_RET(chip, TRANSPORT_FAILED);
}
sd_card->last_rsp_type = rsp_type;
- retval = sd_switch_clock(chip);
+ retval = rts51x_sd_switch_clock(chip);
if (retval != STATUS_SUCCESS)
TRACE_RET(chip, TRANSPORT_FAILED);
rts51x_write_register(chip, SD_CFG1, 0x03, SD_BUS_WIDTH_4);
@@ -583,7 +583,7 @@
}
if (standby) {
- retval = sd_select_card(chip, 0);
+ retval = rts51x_sd_select_card(chip, 0);
if (retval != STATUS_SUCCESS)
TRACE_GOTO(chip, SD_Execute_Write_Cmd_Failed);
}
@@ -690,7 +690,7 @@
rts51x_add_cmd(chip, WRITE_REG_CMD, SD_BLOCK_CNT_L,
0xFF, (u8) ((data_len & 0x0001FE00) >> 9));
- trans_dma_enable(DMA_TO_DEVICE, chip, data_len, DMA_512);
+ rts51x_trans_dma_enable(DMA_TO_DEVICE, chip, data_len, DMA_512);
rts51x_add_cmd(chip, WRITE_REG_CMD, SD_TRANSFER, 0xFF,
SD_TM_AUTO_WRITE_3 | SD_TRANSFER_START);
@@ -724,7 +724,7 @@
}
if (standby) {
- retval = sd_select_card(chip, 1);
+ retval = rts51x_sd_select_card(chip, 1);
if (retval != STATUS_SUCCESS)
TRACE_GOTO(chip, SD_Execute_Write_Cmd_Failed);
}
@@ -767,18 +767,18 @@
SD_Execute_Write_Cmd_Failed:
sd_card->pre_cmd_err = 1;
- set_sense_type(chip, lun, SENSE_TYPE_NO_SENSE);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_NO_SENSE);
if (write_err)
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_WRITE_ERR);
- release_sd_card(chip);
- do_reset_sd_card(chip);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MEDIA_WRITE_ERR);
+ rts51x_release_sd_card(chip);
+ rts51x_do_rts51x_reset_sd_card(chip);
if (!(chip->card_ready & SD_CARD))
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_NOT_PRESENT);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MEDIA_NOT_PRESENT);
TRACE_RET(chip, TRANSPORT_FAILED);
}
-int sd_pass_thru_mode(struct scsi_cmnd *srb, struct rts51x_chip *chip)
+int rts51x_sd_pass_thru_mode(struct scsi_cmnd *srb, struct rts51x_chip *chip)
{
struct sd_info *sd_card = &(chip->sd_card);
unsigned int lun = SCSI_LUN(srb);
@@ -808,7 +808,7 @@
if (!(CHK_BIT(chip->lun_mc, lun))) {
SET_BIT(chip->lun_mc, lun);
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_CHANGE);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MEDIA_CHANGE);
TRACE_RET(chip, TRANSPORT_FAILED);
}
@@ -816,7 +816,7 @@
|| (0x20 != srb->cmnd[4]) || (0x43 != srb->cmnd[5])
|| (0x61 != srb->cmnd[6]) || (0x72 != srb->cmnd[7])
|| (0x64 != srb->cmnd[8])) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
TRACE_RET(chip, TRANSPORT_FAILED);
}
@@ -830,7 +830,7 @@
break;
default:
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
TRACE_RET(chip, TRANSPORT_FAILED);
}
@@ -850,7 +850,7 @@
return TRANSPORT_GOOD;
}
-int sd_execute_no_data(struct scsi_cmnd *srb, struct rts51x_chip *chip)
+int rts51x_sd_execute_no_data(struct scsi_cmnd *srb, struct rts51x_chip *chip)
{
struct sd_info *sd_card = &(chip->sd_card);
unsigned int lun = SCSI_LUN(srb);
@@ -860,7 +860,7 @@
u32 arg;
if (!sd_card->sd_pass_thru_en) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
TRACE_RET(chip, TRANSPORT_FAILED);
}
@@ -876,13 +876,13 @@
rsp_code = srb->cmnd[10];
retval =
- ext_sd_execute_no_data(chip, lun, cmd_idx, standby, acmd, rsp_code,
+ ext_rts51x_sd_execute_no_data(chip, lun, cmd_idx, standby, acmd, rsp_code,
arg);
scsi_set_resid(srb, 0);
return retval;
}
-int sd_execute_read_data(struct scsi_cmnd *srb, struct rts51x_chip *chip)
+int rts51x_sd_execute_read_data(struct scsi_cmnd *srb, struct rts51x_chip *chip)
{
struct sd_info *sd_card = &(chip->sd_card);
int retval;
@@ -891,7 +891,7 @@
u32 arg, data_len;
if (!sd_card->sd_pass_thru_en) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
TRACE_RET(chip, TRANSPORT_FAILED);
}
@@ -912,7 +912,7 @@
rsp_code = srb->cmnd[10];
retval =
- ext_sd_execute_read_data(chip, lun, cmd_idx, send_cmd12, standby,
+ ext_rts51x_sd_execute_read_data(chip, lun, cmd_idx, send_cmd12, standby,
acmd, rsp_code, arg, data_len,
scsi_sglist(srb), scsi_bufflen(srb),
scsi_sg_count(srb));
@@ -920,7 +920,7 @@
return retval;
}
-int sd_execute_write_data(struct scsi_cmnd *srb, struct rts51x_chip *chip)
+int rts51x_sd_execute_write_data(struct scsi_cmnd *srb, struct rts51x_chip *chip)
{
struct sd_info *sd_card = &(chip->sd_card);
int retval;
@@ -929,7 +929,7 @@
u32 data_len, arg;
if (!sd_card->sd_pass_thru_en) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
TRACE_RET(chip, TRANSPORT_FAILED);
}
@@ -950,7 +950,7 @@
rsp_code = srb->cmnd[10];
retval =
- ext_sd_execute_write_data(chip, lun, cmd_idx, send_cmd12, standby,
+ ext_rts51x_sd_execute_write_data(chip, lun, cmd_idx, send_cmd12, standby,
acmd, rsp_code, arg, data_len,
scsi_sglist(srb), scsi_bufflen(srb),
scsi_sg_count(srb));
@@ -958,7 +958,7 @@
return retval;
}
-int sd_get_cmd_rsp(struct scsi_cmnd *srb, struct rts51x_chip *chip)
+int rts51x_sd_get_cmd_rsp(struct scsi_cmnd *srb, struct rts51x_chip *chip)
{
struct sd_info *sd_card = &(chip->sd_card);
unsigned int lun = SCSI_LUN(srb);
@@ -966,20 +966,20 @@
u16 data_len;
if (!sd_card->sd_pass_thru_en) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
TRACE_RET(chip, TRANSPORT_FAILED);
}
if (sd_card->pre_cmd_err) {
sd_card->pre_cmd_err = 0;
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_CHANGE);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MEDIA_CHANGE);
TRACE_RET(chip, TRANSPORT_FAILED);
}
data_len = ((u16) srb->cmnd[7] << 8) | srb->cmnd[8];
if (sd_card->last_rsp_type == SD_RSP_TYPE_R0) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
TRACE_RET(chip, TRANSPORT_FAILED);
} else if (sd_card->last_rsp_type == SD_RSP_TYPE_R2) {
count = (data_len < 17) ? data_len : 17;
@@ -997,20 +997,20 @@
return TRANSPORT_GOOD;
}
-int sd_hw_rst(struct scsi_cmnd *srb, struct rts51x_chip *chip)
+int rts51x_sd_hw_rst(struct scsi_cmnd *srb, struct rts51x_chip *chip)
{
struct sd_info *sd_card = &(chip->sd_card);
unsigned int lun = SCSI_LUN(srb);
int retval;
if (!sd_card->sd_pass_thru_en) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
TRACE_RET(chip, TRANSPORT_FAILED);
}
if (sd_card->pre_cmd_err) {
sd_card->pre_cmd_err = 0;
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_CHANGE);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MEDIA_CHANGE);
TRACE_RET(chip, TRANSPORT_FAILED);
}
@@ -1018,16 +1018,16 @@
|| (0x20 != srb->cmnd[4]) || (0x43 != srb->cmnd[5])
|| (0x61 != srb->cmnd[6]) || (0x72 != srb->cmnd[7])
|| (0x64 != srb->cmnd[8])) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
TRACE_RET(chip, TRANSPORT_FAILED);
}
switch (srb->cmnd[1] & 0x0F) {
case 0:
/* SD Card Power Off -> ON and Initialization */
- retval = reset_sd_card(chip);
+ retval = rts51x_reset_sd_card(chip);
if (retval != STATUS_SUCCESS) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_NOT_PRESENT);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MEDIA_NOT_PRESENT);
sd_card->pre_cmd_err = 1;
TRACE_RET(chip, TRANSPORT_FAILED);
}
@@ -1038,14 +1038,14 @@
* (without SD Card Power Off -> ON) */
retval = reset_sd(chip);
if (retval != STATUS_SUCCESS) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_NOT_PRESENT);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MEDIA_NOT_PRESENT);
sd_card->pre_cmd_err = 1;
TRACE_RET(chip, TRANSPORT_FAILED);
}
break;
default:
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
TRACE_RET(chip, TRANSPORT_FAILED);
}
diff --git a/drivers/staging/rts5139/sd_cprm.h b/drivers/staging/rts5139/sd_cprm.h
index 75e263b..79dfd27 100644
--- a/drivers/staging/rts5139/sd_cprm.h
+++ b/drivers/staging/rts5139/sd_cprm.h
@@ -31,24 +31,24 @@
#include "sd.h"
#ifdef SUPPORT_CPRM
-int ext_sd_execute_no_data(struct rts51x_chip *chip, unsigned int lun,
+int ext_rts51x_sd_execute_no_data(struct rts51x_chip *chip, unsigned int lun,
u8 cmd_idx, u8 standby, u8 acmd, u8 rsp_code,
u32 arg);
-int ext_sd_execute_read_data(struct rts51x_chip *chip, unsigned int lun,
+int ext_rts51x_sd_execute_read_data(struct rts51x_chip *chip, unsigned int lun,
u8 cmd_idx, u8 cmd12, u8 standby, u8 acmd,
u8 rsp_code, u32 arg, u32 data_len, void *data_buf,
unsigned int buf_len, int use_sg);
-int ext_sd_execute_write_data(struct rts51x_chip *chip, unsigned int lun,
+int ext_rts51x_sd_execute_write_data(struct rts51x_chip *chip, unsigned int lun,
u8 cmd_idx, u8 cmd12, u8 standby, u8 acmd,
u8 rsp_code, u32 arg, u32 data_len,
void *data_buf, unsigned int buf_len, int use_sg);
-int sd_pass_thru_mode(struct scsi_cmnd *srb, struct rts51x_chip *chip);
-int sd_execute_no_data(struct scsi_cmnd *srb, struct rts51x_chip *chip);
-int sd_execute_read_data(struct scsi_cmnd *srb, struct rts51x_chip *chip);
-int sd_execute_write_data(struct scsi_cmnd *srb, struct rts51x_chip *chip);
-int sd_get_cmd_rsp(struct scsi_cmnd *srb, struct rts51x_chip *chip);
-int sd_hw_rst(struct scsi_cmnd *srb, struct rts51x_chip *chip);
+int rts51x_sd_pass_thru_mode(struct scsi_cmnd *srb, struct rts51x_chip *chip);
+int rts51x_sd_execute_no_data(struct scsi_cmnd *srb, struct rts51x_chip *chip);
+int rts51x_sd_execute_read_data(struct scsi_cmnd *srb, struct rts51x_chip *chip);
+int rts51x_sd_execute_write_data(struct scsi_cmnd *srb, struct rts51x_chip *chip);
+int rts51x_sd_get_cmd_rsp(struct scsi_cmnd *srb, struct rts51x_chip *chip);
+int rts51x_sd_hw_rst(struct scsi_cmnd *srb, struct rts51x_chip *chip);
#endif
#endif /* __RTS51X_SD_CPRM_H */
diff --git a/drivers/staging/rts5139/xd.c b/drivers/staging/rts5139/xd.c
index 58f8ba2..10fea7e 100644
--- a/drivers/staging/rts5139/xd.c
+++ b/drivers/staging/rts5139/xd.c
@@ -425,7 +425,7 @@
}
#endif
- retval = card_power_on(chip, XD_CARD);
+ retval = rts51x_card_power_on(chip, XD_CARD);
if (retval != STATUS_SUCCESS)
TRACE_RET(chip, retval);
#ifdef SUPPORT_OCP
@@ -472,8 +472,8 @@
rts51x_init_cmd(chip);
rts51x_add_cmd(chip, WRITE_REG_CMD, XD_DTCTL, 0xFF,
XD_TIME_SETUP_STEP * 3 + XD_TIME_RW_STEP *
- (2 + i + chip->option.xd_rw_step)
- + XD_TIME_RWN_STEP * (i + chip->option.xd_rwn_step));
+ (2 + i + chip->option.rts51x_xd_rw_step)
+ + XD_TIME_RWN_STEP * (i + chip->option.rts51x_xd_rwn_step));
rts51x_add_cmd(chip, WRITE_REG_CMD, XD_CATCTL, 0xFF,
XD_TIME_SETUP_STEP * 3 + XD_TIME_RW_STEP * (4 +
i) + XD_TIME_RWN_STEP * (3 + i));
@@ -905,7 +905,7 @@
return (u32) zone->l2p_table[log_off] + ((u32) (zone_no) << 10);
}
-int reset_xd_card(struct rts51x_chip *chip)
+int rts51x_reset_xd_card(struct rts51x_chip *chip)
{
struct xd_info *xd_card = &(chip->xd_card);
int retval;
@@ -920,7 +920,7 @@
xd_card->cis_block = 0xFFFF;
xd_card->delay_write.delay_write_flag = 0;
- enable_card_clock(chip, XD_CARD);
+ rts51x_enable_card_clock(chip, XD_CARD);
retval = reset_xd(chip);
if (retval != STATUS_SUCCESS) {
@@ -1526,7 +1526,7 @@
rts51x_add_cmd(chip, WRITE_REG_CMD, XD_CHK_DATA_STATUS,
XD_AUTO_CHK_DATA_STATUS, XD_AUTO_CHK_DATA_STATUS);
- trans_dma_enable(chip->srb->sc_data_direction, chip, page_cnt * 512,
+ rts51x_trans_dma_enable(chip->srb->sc_data_direction, chip, page_cnt * 512,
DMA_512);
rts51x_add_cmd(chip, WRITE_REG_CMD, XD_TRANSFER, 0xFF,
@@ -1745,7 +1745,7 @@
rts51x_add_cmd(chip, WRITE_REG_CMD, CARD_DATA_SOURCE, 0x01,
RING_BUFFER);
- trans_dma_enable(chip->srb->sc_data_direction, chip, page_cnt * 512,
+ rts51x_trans_dma_enable(chip->srb->sc_data_direction, chip, page_cnt * 512,
DMA_512);
rts51x_add_cmd(chip, WRITE_REG_CMD, XD_TRANSFER, 0xFF,
@@ -1842,7 +1842,7 @@
return STATUS_SUCCESS;
}
-int xd_rw(struct scsi_cmnd *srb, struct rts51x_chip *chip, u32 start_sector,
+int rts51x_xd_rw(struct scsi_cmnd *srb, struct rts51x_chip *chip, u32 start_sector,
u16 sector_cnt)
{
struct xd_info *xd_card = &(chip->xd_card);
@@ -1860,7 +1860,7 @@
xd_card->counter = 0;
- RTS51X_DEBUGP("xd_rw: scsi_bufflen = %d, scsi_sg_count = %d\n",
+ RTS51X_DEBUGP("rts51x_xd_rw: scsi_bufflen = %d, scsi_sg_count = %d\n",
scsi_bufflen(srb), scsi_sg_count(srb));
RTS51X_DEBUGP("Data direction: %s\n",
(srb->sc_data_direction ==
@@ -1883,7 +1883,7 @@
retval = xd_build_l2p_tbl(chip, zone_no);
if (retval != STATUS_SUCCESS) {
chip->card_fail |= XD_CARD;
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_NOT_PRESENT);
+ rts51x_set_sense_type(chip, lun, SENSE_TYPE_MEDIA_NOT_PRESENT);
TRACE_RET(chip, retval);
}
}
@@ -1900,7 +1900,7 @@
delay_write->pageoff,
start_page);
if (retval != STATUS_SUCCESS) {
- set_sense_type(chip, lun,
+ rts51x_set_sense_type(chip, lun,
SENSE_TYPE_MEDIA_WRITE_ERR);
TRACE_RET(chip, retval);
}
@@ -1916,7 +1916,7 @@
} else {
retval = xd_delay_write(chip);
if (retval != STATUS_SUCCESS) {
- set_sense_type(chip, lun,
+ rts51x_set_sense_type(chip, lun,
SENSE_TYPE_MEDIA_WRITE_ERR);
TRACE_RET(chip, retval);
}
@@ -1924,7 +1924,7 @@
new_blk = xd_get_unused_block(chip, zone_no);
if ((old_blk == BLK_NOT_FOUND)
|| (new_blk == BLK_NOT_FOUND)) {
- set_sense_type(chip, lun,
+ rts51x_set_sense_type(chip, lun,
SENSE_TYPE_MEDIA_WRITE_ERR);
TRACE_RET(chip, retval);
}
@@ -1935,11 +1935,11 @@
if (retval != STATUS_SUCCESS) {
if (monitor_card_cd(chip, XD_CARD) ==
CD_NOT_EXIST) {
- set_sense_type(chip, lun,
+ rts51x_set_sense_type(chip, lun,
SENSE_TYPE_MEDIA_NOT_PRESENT);
TRACE_RET(chip, STATUS_FAIL);
}
- set_sense_type(chip, lun,
+ rts51x_set_sense_type(chip, lun,
SENSE_TYPE_MEDIA_WRITE_ERR);
TRACE_RET(chip, retval);
}
@@ -1948,18 +1948,18 @@
retval = xd_delay_write(chip);
if (retval != STATUS_SUCCESS) {
if (monitor_card_cd(chip, XD_CARD) == CD_NOT_EXIST) {
- set_sense_type(chip, lun,
+ rts51x_set_sense_type(chip, lun,
SENSE_TYPE_MEDIA_NOT_PRESENT);
TRACE_RET(chip, STATUS_FAIL);
}
- set_sense_type(chip, lun,
+ rts51x_set_sense_type(chip, lun,
SENSE_TYPE_MEDIA_UNRECOVER_READ_ERR);
TRACE_RET(chip, retval);
}
old_blk = xd_get_l2p_tbl(chip, zone_no, log_off);
if (old_blk == BLK_NOT_FOUND) {
- set_sense_type(chip, lun,
+ rts51x_set_sense_type(chip, lun,
SENSE_TYPE_MEDIA_UNRECOVER_READ_ERR);
TRACE_RET(chip, STATUS_FAIL);
}
@@ -1980,7 +1980,7 @@
start_page, end_page,
buf, &ptr, &offset);
if (retval != STATUS_SUCCESS) {
- set_sense_type(chip, lun,
+ rts51x_set_sense_type(chip, lun,
SENSE_TYPE_MEDIA_UNRECOVER_READ_ERR);
TRACE_RET(chip, STATUS_FAIL);
}
@@ -1991,7 +1991,7 @@
end_page, buf, &ptr,
&offset);
if (retval != STATUS_SUCCESS) {
- set_sense_type(chip, lun,
+ rts51x_set_sense_type(chip, lun,
SENSE_TYPE_MEDIA_WRITE_ERR);
TRACE_RET(chip, STATUS_FAIL);
}
@@ -2010,7 +2010,7 @@
retval = xd_build_l2p_tbl(chip, zone_no);
if (retval != STATUS_SUCCESS) {
chip->card_fail |= XD_CARD;
- set_sense_type(chip, lun,
+ rts51x_set_sense_type(chip, lun,
SENSE_TYPE_MEDIA_NOT_PRESENT);
TRACE_RET(chip, retval);
}
@@ -2019,10 +2019,10 @@
old_blk = xd_get_l2p_tbl(chip, zone_no, log_off);
if (old_blk == BLK_NOT_FOUND) {
if (srb->sc_data_direction == DMA_FROM_DEVICE) {
- set_sense_type(chip, lun,
+ rts51x_set_sense_type(chip, lun,
SENSE_TYPE_MEDIA_UNRECOVER_READ_ERR);
} else {
- set_sense_type(chip, lun,
+ rts51x_set_sense_type(chip, lun,
SENSE_TYPE_MEDIA_WRITE_ERR);
}
TRACE_RET(chip, STATUS_FAIL);
@@ -2031,7 +2031,7 @@
if (srb->sc_data_direction == DMA_TO_DEVICE) {
new_blk = xd_get_unused_block(chip, zone_no);
if (new_blk == BLK_NOT_FOUND) {
- set_sense_type(chip, lun,
+ rts51x_set_sense_type(chip, lun,
SENSE_TYPE_MEDIA_WRITE_ERR);
TRACE_RET(chip, STATUS_FAIL);
}
@@ -2054,7 +2054,7 @@
return STATUS_SUCCESS;
}
-void xd_free_l2p_tbl(struct rts51x_chip *chip)
+void rts51x_xd_free_l2p_tbl(struct rts51x_chip *chip)
{
struct xd_info *xd_card = &(chip->xd_card);
int i = 0;
@@ -2075,7 +2075,7 @@
}
}
-void xd_cleanup_work(struct rts51x_chip *chip)
+void rts51x_xd_cleanup_work(struct rts51x_chip *chip)
{
struct xd_info *xd_card = &(chip->xd_card);
@@ -2115,12 +2115,12 @@
return STATUS_SUCCESS;
}
-int release_xd_card(struct rts51x_chip *chip)
+int rts51x_release_xd_card(struct rts51x_chip *chip)
{
struct xd_info *xd_card = &(chip->xd_card);
int retval;
- RTS51X_DEBUGP("release_xd_card\n");
+ RTS51X_DEBUGP("rts51x_release_xd_card\n");
chip->card_ready &= ~XD_CARD;
chip->card_fail &= ~XD_CARD;
@@ -2128,7 +2128,7 @@
xd_card->delay_write.delay_write_flag = 0;
- xd_free_l2p_tbl(chip);
+ rts51x_xd_free_l2p_tbl(chip);
rts51x_write_register(chip, SFSM_ED, HW_CMD_STOP, HW_CMD_STOP);
diff --git a/drivers/staging/rts5139/xd.h b/drivers/staging/rts5139/xd.h
index 55e4205..695a0b4 100644
--- a/drivers/staging/rts5139/xd.h
+++ b/drivers/staging/rts5139/xd.h
@@ -181,11 +181,11 @@
#define CIS1_8 (256 + 8)
#define CIS1_9 (256 + 9)
-int reset_xd_card(struct rts51x_chip *chip);
-int xd_rw(struct scsi_cmnd *srb, struct rts51x_chip *chip, u32 start_sector,
+int rts51x_reset_xd_card(struct rts51x_chip *chip);
+int rts51x_xd_rw(struct scsi_cmnd *srb, struct rts51x_chip *chip, u32 start_sector,
u16 sector_cnt);
-void xd_free_l2p_tbl(struct rts51x_chip *chip);
-void xd_cleanup_work(struct rts51x_chip *chip);
-int release_xd_card(struct rts51x_chip *chip);
+void rts51x_xd_free_l2p_tbl(struct rts51x_chip *chip);
+void rts51x_xd_cleanup_work(struct rts51x_chip *chip);
+int rts51x_release_xd_card(struct rts51x_chip *chip);
#endif /* __RTS51X_XD_H */
diff --git a/drivers/staging/rts_pstor/Kconfig b/drivers/staging/rts_pstor/Kconfig
deleted file mode 100644
index 4d66a99..0000000
--- a/drivers/staging/rts_pstor/Kconfig
+++ /dev/null
@@ -1,16 +0,0 @@
-config RTS_PSTOR
- tristate "RealTek PCI-E Card Reader support"
- depends on PCI && SCSI
- help
- Say Y here to include driver code to support the Realtek
- PCI-E card readers.
-
- If this driver is compiled as a module, it will be named rts_pstor.
-
-config RTS_PSTOR_DEBUG
- bool "Realtek PCI-E Card Reader verbose debug"
- depends on RTS_PSTOR
- help
- Say Y here in order to have the rts_pstor code generate
- verbose debugging messages.
-
diff --git a/drivers/staging/rts_pstor/Makefile b/drivers/staging/rts_pstor/Makefile
deleted file mode 100644
index 42533d3..0000000
--- a/drivers/staging/rts_pstor/Makefile
+++ /dev/null
@@ -1,16 +0,0 @@
-ccflags := -Idrivers/scsi
-
-obj-$(CONFIG_RTS_PSTOR) := rts_pstor.o
-
-rts_pstor-y := \
- rtsx.o \
- rtsx_chip.o \
- rtsx_transport.o \
- rtsx_scsi.o \
- rtsx_card.o \
- general.o \
- sd.o \
- xd.o \
- ms.o \
- spi.o
-
diff --git a/drivers/staging/rts_pstor/TODO b/drivers/staging/rts_pstor/TODO
deleted file mode 100644
index becb95e..0000000
--- a/drivers/staging/rts_pstor/TODO
+++ /dev/null
@@ -1,9 +0,0 @@
-TODO:
-- support more pcie card reader of Realtek family
-- use kernel coding style
-- checkpatch.pl fixes
-- stop having thousands of lines of code duplicated with staging/rts5139
-- This driver contains an entire SD/MMC stack -- it should use the stack in
- drivers/mmc instead, as a host driver e.g. drivers/mmc/host/realtek-pci.c;
- see drivers/mmc/host/via-sdmmc.c as an example.
-- This driver presents cards as SCSI devices, but they should be MMC devices.
diff --git a/drivers/staging/rts_pstor/debug.h b/drivers/staging/rts_pstor/debug.h
deleted file mode 100644
index ab305be..0000000
--- a/drivers/staging/rts_pstor/debug.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/* Driver for Realtek PCI-Express card reader
- * Header file
- *
- * Copyright(c) 2009 Realtek Semiconductor Corp. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, see <http://www.gnu.org/licenses/>.
- *
- * Author:
- * wwang (wei_wang@realsil.com.cn)
- * No. 450, Shenhu Road, Suzhou Industry Park, Suzhou, China
- */
-
-#ifndef __REALTEK_RTSX_DEBUG_H
-#define __REALTEK_RTSX_DEBUG_H
-
-#include <linux/kernel.h>
-
-#define RTSX_STOR "rts_pstor: "
-
-#ifdef CONFIG_RTS_PSTOR_DEBUG
-#define RTSX_DEBUGP(x...) printk(KERN_DEBUG RTSX_STOR x)
-#define RTSX_DEBUGPN(x...) printk(KERN_DEBUG x)
-#define RTSX_DEBUGPX(x...) printk(x)
-#define RTSX_DEBUG(x) x
-#else
-#define RTSX_DEBUGP(x...)
-#define RTSX_DEBUGPN(x...)
-#define RTSX_DEBUGPX(x...)
-#define RTSX_DEBUG(x)
-#endif
-
-#endif /* __REALTEK_RTSX_DEBUG_H */
diff --git a/drivers/staging/rts_pstor/general.c b/drivers/staging/rts_pstor/general.c
deleted file mode 100644
index 056e98d..0000000
--- a/drivers/staging/rts_pstor/general.c
+++ /dev/null
@@ -1,35 +0,0 @@
-/* Driver for Realtek PCI-Express card reader
- *
- * Copyright(c) 2009 Realtek Semiconductor Corp. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, see <http://www.gnu.org/licenses/>.
- *
- * Author:
- * wwang (wei_wang@realsil.com.cn)
- * No. 450, Shenhu Road, Suzhou Industry Park, Suzhou, China
- */
-
-#include "general.h"
-
-int bit1cnt_long(u32 data)
-{
- int i, cnt = 0;
- for (i = 0; i < 32; i++) {
- if (data & 0x01)
- cnt++;
- data >>= 1;
- }
- return cnt;
-}
-
diff --git a/drivers/staging/rts_pstor/ms.c b/drivers/staging/rts_pstor/ms.c
deleted file mode 100644
index 16a5c16..0000000
--- a/drivers/staging/rts_pstor/ms.c
+++ /dev/null
@@ -1,4051 +0,0 @@
-/* Driver for Realtek PCI-Express card reader
- *
- * Copyright(c) 2009 Realtek Semiconductor Corp. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, see <http://www.gnu.org/licenses/>.
- *
- * Author:
- * wwang (wei_wang@realsil.com.cn)
- * No. 450, Shenhu Road, Suzhou Industry Park, Suzhou, China
- */
-
-#include <linux/blkdev.h>
-#include <linux/kthread.h>
-#include <linux/sched.h>
-#include <linux/vmalloc.h>
-
-#include "rtsx.h"
-#include "rtsx_transport.h"
-#include "rtsx_scsi.h"
-#include "rtsx_card.h"
-#include "ms.h"
-
-static inline void ms_set_err_code(struct rtsx_chip *chip, u8 err_code)
-{
- struct ms_info *ms_card = &(chip->ms_card);
-
- ms_card->err_code = err_code;
-}
-
-static inline int ms_check_err_code(struct rtsx_chip *chip, u8 err_code)
-{
- struct ms_info *ms_card = &(chip->ms_card);
-
- return (ms_card->err_code == err_code);
-}
-
-static int ms_parse_err_code(struct rtsx_chip *chip)
-{
- TRACE_RET(chip, STATUS_FAIL);
-}
-
-static int ms_transfer_tpc(struct rtsx_chip *chip, u8 trans_mode, u8 tpc, u8 cnt, u8 cfg)
-{
- struct ms_info *ms_card = &(chip->ms_card);
- int retval;
- u8 *ptr;
-
- RTSX_DEBUGP("ms_transfer_tpc: tpc = 0x%x\n", tpc);
-
- rtsx_init_cmd(chip);
-
- rtsx_add_cmd(chip, WRITE_REG_CMD, MS_TPC, 0xFF, tpc);
- rtsx_add_cmd(chip, WRITE_REG_CMD, MS_BYTE_CNT, 0xFF, cnt);
- rtsx_add_cmd(chip, WRITE_REG_CMD, MS_TRANS_CFG, 0xFF, cfg);
- rtsx_add_cmd(chip, WRITE_REG_CMD, CARD_DATA_SOURCE, 0x01, PINGPONG_BUFFER);
-
- rtsx_add_cmd(chip, WRITE_REG_CMD, MS_TRANSFER, 0xFF, MS_TRANSFER_START | trans_mode);
- rtsx_add_cmd(chip, CHECK_REG_CMD, MS_TRANSFER, MS_TRANSFER_END, MS_TRANSFER_END);
-
- rtsx_add_cmd(chip, READ_REG_CMD, MS_TRANS_CFG, 0, 0);
-
- retval = rtsx_send_cmd(chip, MS_CARD, 5000);
- if (retval < 0) {
- rtsx_clear_ms_error(chip);
- ms_set_err_code(chip, MS_TO_ERROR);
- TRACE_RET(chip, ms_parse_err_code(chip));
- }
-
- ptr = rtsx_get_cmd_data(chip) + 1;
-
- if (!(tpc & 0x08)) { /* Read Packet */
- if (*ptr & MS_CRC16_ERR) {
- ms_set_err_code(chip, MS_CRC16_ERROR);
- TRACE_RET(chip, ms_parse_err_code(chip));
- }
- } else { /* Write Packet */
- if (CHK_MSPRO(ms_card) && !(*ptr & 0x80)) {
- if (*ptr & (MS_INT_ERR | MS_INT_CMDNK)) {
- ms_set_err_code(chip, MS_CMD_NK);
- TRACE_RET(chip, ms_parse_err_code(chip));
- }
- }
- }
-
- if (*ptr & MS_RDY_TIMEOUT) {
- rtsx_clear_ms_error(chip);
- ms_set_err_code(chip, MS_TO_ERROR);
- TRACE_RET(chip, ms_parse_err_code(chip));
- }
-
- return STATUS_SUCCESS;
-}
-
-static int ms_transfer_data(struct rtsx_chip *chip, u8 trans_mode, u8 tpc, u16 sec_cnt,
- u8 cfg, int mode_2k, int use_sg, void *buf, int buf_len)
-{
- int retval;
- u8 val, err_code = 0;
- enum dma_data_direction dir;
-
- if (!buf || !buf_len)
- TRACE_RET(chip, STATUS_FAIL);
-
- if (trans_mode == MS_TM_AUTO_READ) {
- dir = DMA_FROM_DEVICE;
- err_code = MS_FLASH_READ_ERROR;
- } else if (trans_mode == MS_TM_AUTO_WRITE) {
- dir = DMA_TO_DEVICE;
- err_code = MS_FLASH_WRITE_ERROR;
- } else {
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- rtsx_init_cmd(chip);
-
- rtsx_add_cmd(chip, WRITE_REG_CMD, MS_TPC, 0xFF, tpc);
- rtsx_add_cmd(chip, WRITE_REG_CMD,
- MS_SECTOR_CNT_H, 0xFF, (u8)(sec_cnt >> 8));
- rtsx_add_cmd(chip, WRITE_REG_CMD, MS_SECTOR_CNT_L, 0xFF, (u8)sec_cnt);
- rtsx_add_cmd(chip, WRITE_REG_CMD, MS_TRANS_CFG, 0xFF, cfg);
-
- if (mode_2k) {
- rtsx_add_cmd(chip, WRITE_REG_CMD,
- MS_CFG, MS_2K_SECTOR_MODE, MS_2K_SECTOR_MODE);
- } else {
- rtsx_add_cmd(chip, WRITE_REG_CMD, MS_CFG, MS_2K_SECTOR_MODE, 0);
- }
-
- trans_dma_enable(dir, chip, sec_cnt * 512, DMA_512);
-
- rtsx_add_cmd(chip, WRITE_REG_CMD,
- MS_TRANSFER, 0xFF, MS_TRANSFER_START | trans_mode);
- rtsx_add_cmd(chip, CHECK_REG_CMD,
- MS_TRANSFER, MS_TRANSFER_END, MS_TRANSFER_END);
-
- rtsx_send_cmd_no_wait(chip);
-
- retval = rtsx_transfer_data(chip, MS_CARD, buf, buf_len,
- use_sg, dir, chip->mspro_timeout);
- if (retval < 0) {
- ms_set_err_code(chip, err_code);
- if (retval == -ETIMEDOUT)
- retval = STATUS_TIMEDOUT;
- else
- retval = STATUS_FAIL;
-
- TRACE_RET(chip, retval);
- }
-
- RTSX_READ_REG(chip, MS_TRANS_CFG, &val);
- if (val & (MS_INT_CMDNK | MS_INT_ERR | MS_CRC16_ERR | MS_RDY_TIMEOUT))
- TRACE_RET(chip, STATUS_FAIL);
-
- return STATUS_SUCCESS;
-}
-
-static int ms_write_bytes(struct rtsx_chip *chip,
- u8 tpc, u8 cnt, u8 cfg, u8 *data, int data_len)
-{
- struct ms_info *ms_card = &(chip->ms_card);
- int retval, i;
-
- if (!data || (data_len < cnt))
- TRACE_RET(chip, STATUS_ERROR);
-
- rtsx_init_cmd(chip);
-
- for (i = 0; i < cnt; i++) {
- rtsx_add_cmd(chip, WRITE_REG_CMD,
- PPBUF_BASE2 + i, 0xFF, data[i]);
- }
- if (cnt % 2)
- rtsx_add_cmd(chip, WRITE_REG_CMD, PPBUF_BASE2 + i, 0xFF, 0xFF);
-
- rtsx_add_cmd(chip, WRITE_REG_CMD, MS_TPC, 0xFF, tpc);
- rtsx_add_cmd(chip, WRITE_REG_CMD, MS_BYTE_CNT, 0xFF, cnt);
- rtsx_add_cmd(chip, WRITE_REG_CMD, MS_TRANS_CFG, 0xFF, cfg);
- rtsx_add_cmd(chip, WRITE_REG_CMD, CARD_DATA_SOURCE, 0x01, PINGPONG_BUFFER);
-
- rtsx_add_cmd(chip, WRITE_REG_CMD,
- MS_TRANSFER, 0xFF, MS_TRANSFER_START | MS_TM_WRITE_BYTES);
- rtsx_add_cmd(chip, CHECK_REG_CMD,
- MS_TRANSFER, MS_TRANSFER_END, MS_TRANSFER_END);
-
- retval = rtsx_send_cmd(chip, MS_CARD, 5000);
- if (retval < 0) {
- u8 val = 0;
-
- rtsx_read_register(chip, MS_TRANS_CFG, &val);
- RTSX_DEBUGP("MS_TRANS_CFG: 0x%02x\n", val);
-
- rtsx_clear_ms_error(chip);
-
- if (!(tpc & 0x08)) {
- if (val & MS_CRC16_ERR) {
- ms_set_err_code(chip, MS_CRC16_ERROR);
- TRACE_RET(chip, ms_parse_err_code(chip));
- }
- } else {
- if (CHK_MSPRO(ms_card) && !(val & 0x80)) {
- if (val & (MS_INT_ERR | MS_INT_CMDNK)) {
- ms_set_err_code(chip, MS_CMD_NK);
- TRACE_RET(chip, ms_parse_err_code(chip));
- }
- }
- }
-
- if (val & MS_RDY_TIMEOUT) {
- ms_set_err_code(chip, MS_TO_ERROR);
- TRACE_RET(chip, ms_parse_err_code(chip));
- }
-
- ms_set_err_code(chip, MS_TO_ERROR);
- TRACE_RET(chip, ms_parse_err_code(chip));
- }
-
- return STATUS_SUCCESS;
-}
-
-static int ms_read_bytes(struct rtsx_chip *chip, u8 tpc, u8 cnt, u8 cfg, u8 *data, int data_len)
-{
- struct ms_info *ms_card = &(chip->ms_card);
- int retval, i;
- u8 *ptr;
-
- if (!data)
- TRACE_RET(chip, STATUS_ERROR);
-
- rtsx_init_cmd(chip);
-
- rtsx_add_cmd(chip, WRITE_REG_CMD, MS_TPC, 0xFF, tpc);
- rtsx_add_cmd(chip, WRITE_REG_CMD, MS_BYTE_CNT, 0xFF, cnt);
- rtsx_add_cmd(chip, WRITE_REG_CMD, MS_TRANS_CFG, 0xFF, cfg);
- rtsx_add_cmd(chip, WRITE_REG_CMD, CARD_DATA_SOURCE, 0x01, PINGPONG_BUFFER);
-
- rtsx_add_cmd(chip, WRITE_REG_CMD, MS_TRANSFER, 0xFF, MS_TRANSFER_START | MS_TM_READ_BYTES);
- rtsx_add_cmd(chip, CHECK_REG_CMD, MS_TRANSFER, MS_TRANSFER_END, MS_TRANSFER_END);
-
- for (i = 0; i < data_len - 1; i++)
- rtsx_add_cmd(chip, READ_REG_CMD, PPBUF_BASE2 + i, 0, 0);
-
- if (data_len % 2)
- rtsx_add_cmd(chip, READ_REG_CMD, PPBUF_BASE2 + data_len, 0, 0);
- else
- rtsx_add_cmd(chip, READ_REG_CMD, PPBUF_BASE2 + data_len - 1, 0, 0);
-
- retval = rtsx_send_cmd(chip, MS_CARD, 5000);
- if (retval < 0) {
- u8 val = 0;
-
- rtsx_read_register(chip, MS_TRANS_CFG, &val);
- rtsx_clear_ms_error(chip);
-
- if (!(tpc & 0x08)) {
- if (val & MS_CRC16_ERR) {
- ms_set_err_code(chip, MS_CRC16_ERROR);
- TRACE_RET(chip, ms_parse_err_code(chip));
- }
- } else {
- if (CHK_MSPRO(ms_card) && !(val & 0x80)) {
- if (val & (MS_INT_ERR | MS_INT_CMDNK)) {
- ms_set_err_code(chip, MS_CMD_NK);
- TRACE_RET(chip, ms_parse_err_code(chip));
- }
- }
- }
-
- if (val & MS_RDY_TIMEOUT) {
- ms_set_err_code(chip, MS_TO_ERROR);
- TRACE_RET(chip, ms_parse_err_code(chip));
- }
-
- ms_set_err_code(chip, MS_TO_ERROR);
- TRACE_RET(chip, ms_parse_err_code(chip));
- }
-
- ptr = rtsx_get_cmd_data(chip) + 1;
-
- for (i = 0; i < data_len; i++)
- data[i] = ptr[i];
-
- if ((tpc == PRO_READ_SHORT_DATA) && (data_len == 8)) {
- RTSX_DEBUGP("Read format progress:\n");
- RTSX_DUMP(ptr, cnt);
- }
-
- return STATUS_SUCCESS;
-}
-
-static int ms_set_rw_reg_addr(struct rtsx_chip *chip,
- u8 read_start, u8 read_cnt, u8 write_start, u8 write_cnt)
-{
- int retval, i;
- u8 data[4];
-
- data[0] = read_start;
- data[1] = read_cnt;
- data[2] = write_start;
- data[3] = write_cnt;
-
- for (i = 0; i < MS_MAX_RETRY_COUNT; i++) {
- retval = ms_write_bytes(chip, SET_RW_REG_ADRS, 4,
- NO_WAIT_INT, data, 4);
- if (retval == STATUS_SUCCESS)
- return STATUS_SUCCESS;
- rtsx_clear_ms_error(chip);
- }
-
- TRACE_RET(chip, STATUS_FAIL);
-}
-
-static int ms_send_cmd(struct rtsx_chip *chip, u8 cmd, u8 cfg)
-{
- u8 data[2];
-
- data[0] = cmd;
- data[1] = 0;
-
- return ms_write_bytes(chip, PRO_SET_CMD, 1, cfg, data, 1);
-}
-
-static int ms_set_init_para(struct rtsx_chip *chip)
-{
- struct ms_info *ms_card = &(chip->ms_card);
- int retval;
-
- if (CHK_HG8BIT(ms_card)) {
- if (chip->asic_code)
- ms_card->ms_clock = chip->asic_ms_hg_clk;
- else
- ms_card->ms_clock = chip->fpga_ms_hg_clk;
-
- } else if (CHK_MSPRO(ms_card) || CHK_MS4BIT(ms_card)) {
- if (chip->asic_code)
- ms_card->ms_clock = chip->asic_ms_4bit_clk;
- else
- ms_card->ms_clock = chip->fpga_ms_4bit_clk;
-
- } else {
- if (chip->asic_code)
- ms_card->ms_clock = chip->asic_ms_1bit_clk;
- else
- ms_card->ms_clock = chip->fpga_ms_1bit_clk;
- }
-
- retval = switch_clock(chip, ms_card->ms_clock);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- retval = select_card(chip, MS_CARD);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- return STATUS_SUCCESS;
-}
-
-static int ms_switch_clock(struct rtsx_chip *chip)
-{
- struct ms_info *ms_card = &(chip->ms_card);
- int retval;
-
- retval = select_card(chip, MS_CARD);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- retval = switch_clock(chip, ms_card->ms_clock);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- return STATUS_SUCCESS;
-}
-
-static int ms_pull_ctl_disable(struct rtsx_chip *chip)
-{
- if (CHECK_PID(chip, 0x5209)) {
- RTSX_WRITE_REG(chip, CARD_PULL_CTL4, 0xFF, 0x55);
- RTSX_WRITE_REG(chip, CARD_PULL_CTL5, 0xFF, 0x55);
- RTSX_WRITE_REG(chip, CARD_PULL_CTL6, 0xFF, 0x15);
- } else if (CHECK_PID(chip, 0x5208)) {
- RTSX_WRITE_REG(chip, CARD_PULL_CTL1, 0xFF,
- MS_D1_PD | MS_D2_PD | MS_CLK_PD | MS_D6_PD);
- RTSX_WRITE_REG(chip, CARD_PULL_CTL2, 0xFF,
- MS_D3_PD | MS_D0_PD | MS_BS_PD | XD_D4_PD);
- RTSX_WRITE_REG(chip, CARD_PULL_CTL3, 0xFF,
- MS_D7_PD | XD_CE_PD | XD_CLE_PD | XD_CD_PU);
- RTSX_WRITE_REG(chip, CARD_PULL_CTL4, 0xFF,
- XD_RDY_PD | SD_D3_PD | SD_D2_PD | XD_ALE_PD);
- RTSX_WRITE_REG(chip, CARD_PULL_CTL5, 0xFF,
- MS_INS_PU | SD_WP_PD | SD_CD_PU | SD_CMD_PD);
- RTSX_WRITE_REG(chip, CARD_PULL_CTL6, 0xFF,
- MS_D5_PD | MS_D4_PD);
- } else if (CHECK_PID(chip, 0x5288)) {
- if (CHECK_BARO_PKG(chip, QFN)) {
- RTSX_WRITE_REG(chip, CARD_PULL_CTL1, 0xFF, 0x55);
- RTSX_WRITE_REG(chip, CARD_PULL_CTL2, 0xFF, 0x55);
- RTSX_WRITE_REG(chip, CARD_PULL_CTL3, 0xFF, 0x4B);
- RTSX_WRITE_REG(chip, CARD_PULL_CTL4, 0xFF, 0x69);
- }
- }
-
- return STATUS_SUCCESS;
-}
-
-static int ms_pull_ctl_enable(struct rtsx_chip *chip)
-{
- int retval;
-
- rtsx_init_cmd(chip);
-
- if (CHECK_PID(chip, 0x5209)) {
- rtsx_add_cmd(chip, WRITE_REG_CMD, CARD_PULL_CTL4, 0xFF, 0x55);
- rtsx_add_cmd(chip, WRITE_REG_CMD, CARD_PULL_CTL5, 0xFF, 0x55);
- rtsx_add_cmd(chip, WRITE_REG_CMD, CARD_PULL_CTL6, 0xFF, 0x15);
- } else if (CHECK_PID(chip, 0x5208)) {
- rtsx_add_cmd(chip, WRITE_REG_CMD, CARD_PULL_CTL1, 0xFF,
- MS_D1_PD | MS_D2_PD | MS_CLK_NP | MS_D6_PD);
- rtsx_add_cmd(chip, WRITE_REG_CMD, CARD_PULL_CTL2, 0xFF,
- MS_D3_PD | MS_D0_PD | MS_BS_NP | XD_D4_PD);
- rtsx_add_cmd(chip, WRITE_REG_CMD, CARD_PULL_CTL3, 0xFF,
- MS_D7_PD | XD_CE_PD | XD_CLE_PD | XD_CD_PU);
- rtsx_add_cmd(chip, WRITE_REG_CMD, CARD_PULL_CTL4, 0xFF,
- XD_RDY_PD | SD_D3_PD | SD_D2_PD | XD_ALE_PD);
- rtsx_add_cmd(chip, WRITE_REG_CMD, CARD_PULL_CTL5, 0xFF,
- MS_INS_PU | SD_WP_PD | SD_CD_PU | SD_CMD_PD);
- rtsx_add_cmd(chip, WRITE_REG_CMD, CARD_PULL_CTL6, 0xFF,
- MS_D5_PD | MS_D4_PD);
- } else if (CHECK_PID(chip, 0x5288)) {
- if (CHECK_BARO_PKG(chip, QFN)) {
- rtsx_add_cmd(chip, WRITE_REG_CMD,
- CARD_PULL_CTL1, 0xFF, 0x55);
- rtsx_add_cmd(chip, WRITE_REG_CMD,
- CARD_PULL_CTL2, 0xFF, 0x45);
- rtsx_add_cmd(chip, WRITE_REG_CMD,
- CARD_PULL_CTL3, 0xFF, 0x4B);
- rtsx_add_cmd(chip, WRITE_REG_CMD,
- CARD_PULL_CTL4, 0xFF, 0x29);
- }
- }
-
- retval = rtsx_send_cmd(chip, MS_CARD, 100);
- if (retval < 0)
- TRACE_RET(chip, STATUS_FAIL);
-
- return STATUS_SUCCESS;
-}
-
-static int ms_prepare_reset(struct rtsx_chip *chip)
-{
- struct ms_info *ms_card = &(chip->ms_card);
- int retval;
- u8 oc_mask = 0;
-
- ms_card->ms_type = 0;
- ms_card->check_ms_flow = 0;
- ms_card->switch_8bit_fail = 0;
- ms_card->delay_write.delay_write_flag = 0;
-
- ms_card->pro_under_formatting = 0;
-
- retval = ms_power_off_card3v3(chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- if (!chip->ft2_fast_mode)
- wait_timeout(250);
-
- retval = enable_card_clock(chip, MS_CARD);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- if (chip->asic_code) {
- retval = ms_pull_ctl_enable(chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
- } else {
- RTSX_WRITE_REG(chip, FPGA_PULL_CTL, FPGA_MS_PULL_CTL_BIT | 0x20, 0);
- }
-
- if (!chip->ft2_fast_mode) {
- retval = card_power_on(chip, MS_CARD);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- wait_timeout(150);
-
-#ifdef SUPPORT_OCP
- if (CHECK_LUN_MODE(chip, SD_MS_2LUN))
- oc_mask = MS_OC_NOW | MS_OC_EVER;
- else
- oc_mask = SD_OC_NOW | SD_OC_EVER;
-
- if (chip->ocp_stat & oc_mask) {
- RTSX_DEBUGP("Over current, OCPSTAT is 0x%x\n",
- chip->ocp_stat);
- TRACE_RET(chip, STATUS_FAIL);
- }
-#endif
- }
-
- RTSX_WRITE_REG(chip, CARD_OE, MS_OUTPUT_EN, MS_OUTPUT_EN);
-
- if (chip->asic_code) {
- RTSX_WRITE_REG(chip, MS_CFG, 0xFF,
- SAMPLE_TIME_RISING | PUSH_TIME_DEFAULT |
- NO_EXTEND_TOGGLE | MS_BUS_WIDTH_1);
- } else {
- RTSX_WRITE_REG(chip, MS_CFG, 0xFF,
- SAMPLE_TIME_FALLING | PUSH_TIME_DEFAULT |
- NO_EXTEND_TOGGLE | MS_BUS_WIDTH_1);
- }
- RTSX_WRITE_REG(chip, MS_TRANS_CFG, 0xFF, NO_WAIT_INT | NO_AUTO_READ_INT_REG);
- RTSX_WRITE_REG(chip, CARD_STOP, MS_STOP | MS_CLR_ERR, MS_STOP | MS_CLR_ERR);
-
- retval = ms_set_init_para(chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- return STATUS_SUCCESS;
-}
-
-static int ms_identify_media_type(struct rtsx_chip *chip, int switch_8bit_bus)
-{
- struct ms_info *ms_card = &(chip->ms_card);
- int retval, i;
- u8 val;
-
- retval = ms_set_rw_reg_addr(chip, Pro_StatusReg, 6, SystemParm, 1);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- for (i = 0; i < MS_MAX_RETRY_COUNT; i++) {
- retval = ms_transfer_tpc(chip, MS_TM_READ_BYTES, READ_REG, 6, NO_WAIT_INT);
- if (retval == STATUS_SUCCESS)
- break;
- }
- if (i == MS_MAX_RETRY_COUNT)
- TRACE_RET(chip, STATUS_FAIL);
-
- RTSX_READ_REG(chip, PPBUF_BASE2 + 2, &val);
- RTSX_DEBUGP("Type register: 0x%x\n", val);
- if (val != 0x01) {
- if (val != 0x02)
- ms_card->check_ms_flow = 1;
-
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- RTSX_READ_REG(chip, PPBUF_BASE2 + 4, &val);
- RTSX_DEBUGP("Category register: 0x%x\n", val);
- if (val != 0) {
- ms_card->check_ms_flow = 1;
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- RTSX_READ_REG(chip, PPBUF_BASE2 + 5, &val);
- RTSX_DEBUGP("Class register: 0x%x\n", val);
- if (val == 0) {
- RTSX_READ_REG(chip, PPBUF_BASE2, &val);
- if (val & WRT_PRTCT)
- chip->card_wp |= MS_CARD;
- else
- chip->card_wp &= ~MS_CARD;
-
- } else if ((val == 0x01) || (val == 0x02) || (val == 0x03)) {
- chip->card_wp |= MS_CARD;
- } else {
- ms_card->check_ms_flow = 1;
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- ms_card->ms_type |= TYPE_MSPRO;
-
- RTSX_READ_REG(chip, PPBUF_BASE2 + 3, &val);
- RTSX_DEBUGP("IF Mode register: 0x%x\n", val);
- if (val == 0) {
- ms_card->ms_type &= 0x0F;
- } else if (val == 7) {
- if (switch_8bit_bus)
- ms_card->ms_type |= MS_HG;
- else
- ms_card->ms_type &= 0x0F;
-
- } else {
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- return STATUS_SUCCESS;
-}
-
-static int ms_confirm_cpu_startup(struct rtsx_chip *chip)
-{
- int retval, i, k;
- u8 val;
-
- /* Confirm CPU StartUp */
- k = 0;
- do {
- if (detect_card_cd(chip, MS_CARD) != STATUS_SUCCESS) {
- ms_set_err_code(chip, MS_NO_CARD);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- for (i = 0; i < MS_MAX_RETRY_COUNT; i++) {
- retval = ms_read_bytes(chip, GET_INT, 1, NO_WAIT_INT, &val, 1);
- if (retval == STATUS_SUCCESS)
- break;
- }
- if (i == MS_MAX_RETRY_COUNT)
- TRACE_RET(chip, STATUS_FAIL);
-
- if (k > 100)
- TRACE_RET(chip, STATUS_FAIL);
-
- k++;
- wait_timeout(100);
- } while (!(val & INT_REG_CED));
-
- for (i = 0; i < MS_MAX_RETRY_COUNT; i++) {
- retval = ms_read_bytes(chip, GET_INT, 1, NO_WAIT_INT, &val, 1);
- if (retval == STATUS_SUCCESS)
- break;
- }
- if (i == MS_MAX_RETRY_COUNT)
- TRACE_RET(chip, STATUS_FAIL);
-
- if (val & INT_REG_ERR) {
- if (val & INT_REG_CMDNK)
- chip->card_wp |= (MS_CARD);
- else
- TRACE_RET(chip, STATUS_FAIL);
- }
- /* -- end confirm CPU startup */
-
- return STATUS_SUCCESS;
-}
-
-static int ms_switch_parallel_bus(struct rtsx_chip *chip)
-{
- int retval, i;
- u8 data[2];
-
- data[0] = PARALLEL_4BIT_IF;
- data[1] = 0;
- for (i = 0; i < MS_MAX_RETRY_COUNT; i++) {
- retval = ms_write_bytes(chip, WRITE_REG, 1, NO_WAIT_INT, data, 2);
- if (retval == STATUS_SUCCESS)
- break;
- }
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- return STATUS_SUCCESS;
-}
-
-static int ms_switch_8bit_bus(struct rtsx_chip *chip)
-{
- struct ms_info *ms_card = &(chip->ms_card);
- int retval, i;
- u8 data[2];
-
- data[0] = PARALLEL_8BIT_IF;
- data[1] = 0;
- for (i = 0; i < MS_MAX_RETRY_COUNT; i++) {
- retval = ms_write_bytes(chip, WRITE_REG, 1, NO_WAIT_INT, data, 2);
- if (retval == STATUS_SUCCESS)
- break;
- }
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- RTSX_WRITE_REG(chip, MS_CFG, 0x98, MS_BUS_WIDTH_8 | SAMPLE_TIME_FALLING);
- ms_card->ms_type |= MS_8BIT;
- retval = ms_set_init_para(chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- for (i = 0; i < MS_MAX_RETRY_COUNT; i++) {
- retval = ms_transfer_tpc(chip, MS_TM_READ_BYTES, GET_INT, 1, NO_WAIT_INT);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- return STATUS_SUCCESS;
-}
-
-static int ms_pro_reset_flow(struct rtsx_chip *chip, int switch_8bit_bus)
-{
- struct ms_info *ms_card = &(chip->ms_card);
- int retval, i;
-
- for (i = 0; i < 3; i++) {
- retval = ms_prepare_reset(chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- retval = ms_identify_media_type(chip, switch_8bit_bus);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- retval = ms_confirm_cpu_startup(chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- retval = ms_switch_parallel_bus(chip);
- if (retval != STATUS_SUCCESS) {
- if (detect_card_cd(chip, MS_CARD) != STATUS_SUCCESS) {
- ms_set_err_code(chip, MS_NO_CARD);
- TRACE_RET(chip, STATUS_FAIL);
- }
- continue;
- } else {
- break;
- }
- }
-
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- /* Switch MS-PRO into Parallel mode */
- RTSX_WRITE_REG(chip, MS_CFG, 0x18, MS_BUS_WIDTH_4);
- RTSX_WRITE_REG(chip, MS_CFG, PUSH_TIME_ODD, PUSH_TIME_ODD);
-
- retval = ms_set_init_para(chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- /* If MSPro HG Card, We shall try to switch to 8-bit bus */
- if (CHK_MSHG(ms_card) && chip->support_ms_8bit && switch_8bit_bus) {
- retval = ms_switch_8bit_bus(chip);
- if (retval != STATUS_SUCCESS) {
- ms_card->switch_8bit_fail = 1;
- TRACE_RET(chip, STATUS_FAIL);
- }
- }
-
- return STATUS_SUCCESS;
-}
-
-#ifdef XC_POWERCLASS
-static int msxc_change_power(struct rtsx_chip *chip, u8 mode)
-{
- int retval;
- u8 buf[6];
-
- ms_cleanup_work(chip);
-
- retval = ms_set_rw_reg_addr(chip, 0, 0, Pro_DataCount1, 6);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- buf[0] = 0;
- buf[1] = mode;
- buf[2] = 0;
- buf[3] = 0;
- buf[4] = 0;
- buf[5] = 0;
-
- retval = ms_write_bytes(chip, PRO_WRITE_REG , 6, NO_WAIT_INT, buf, 6);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- retval = ms_send_cmd(chip, XC_CHG_POWER, WAIT_INT);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- RTSX_READ_REG(chip, MS_TRANS_CFG, buf);
- if (buf[0] & (MS_INT_CMDNK | MS_INT_ERR))
- TRACE_RET(chip, STATUS_FAIL);
-
- return STATUS_SUCCESS;
-}
-#endif
-
-static int ms_read_attribute_info(struct rtsx_chip *chip)
-{
- struct ms_info *ms_card = &(chip->ms_card);
- int retval, i;
- u8 val, *buf, class_code, device_type, sub_class, data[16];
- u16 total_blk = 0, blk_size = 0;
-#ifdef SUPPORT_MSXC
- u32 xc_total_blk = 0, xc_blk_size = 0;
-#endif
- u32 sys_info_addr = 0, sys_info_size;
-#ifdef SUPPORT_PCGL_1P18
- u32 model_name_addr = 0, model_name_size;
- int found_sys_info = 0, found_model_name = 0;
-#endif
-
- retval = ms_set_rw_reg_addr(chip, Pro_IntReg, 2, Pro_SystemParm, 7);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- if (CHK_MS8BIT(ms_card))
- data[0] = PARALLEL_8BIT_IF;
- else
- data[0] = PARALLEL_4BIT_IF;
-
- data[1] = 0;
-
- data[2] = 0x40;
- data[3] = 0;
- data[4] = 0;
- data[5] = 0;
- data[6] = 0;
- data[7] = 0;
-
- for (i = 0; i < MS_MAX_RETRY_COUNT; i++) {
- retval = ms_write_bytes(chip, PRO_WRITE_REG, 7, NO_WAIT_INT, data, 8);
- if (retval == STATUS_SUCCESS)
- break;
- }
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- buf = kmalloc(64 * 512, GFP_KERNEL);
- if (buf == NULL)
- TRACE_RET(chip, STATUS_ERROR);
-
- for (i = 0; i < MS_MAX_RETRY_COUNT; i++) {
- retval = ms_send_cmd(chip, PRO_READ_ATRB, WAIT_INT);
- if (retval != STATUS_SUCCESS)
- continue;
-
- retval = rtsx_read_register(chip, MS_TRANS_CFG, &val);
- if (retval != STATUS_SUCCESS) {
- kfree(buf);
- TRACE_RET(chip, STATUS_FAIL);
- }
- if (!(val & MS_INT_BREQ)) {
- kfree(buf);
- TRACE_RET(chip, STATUS_FAIL);
- }
- retval = ms_transfer_data(chip, MS_TM_AUTO_READ, PRO_READ_LONG_DATA,
- 0x40, WAIT_INT, 0, 0, buf, 64 * 512);
- if (retval == STATUS_SUCCESS)
- break;
- else
- rtsx_clear_ms_error(chip);
- }
- if (retval != STATUS_SUCCESS) {
- kfree(buf);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- i = 0;
- do {
- retval = rtsx_read_register(chip, MS_TRANS_CFG, &val);
- if (retval != STATUS_SUCCESS) {
- kfree(buf);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- if ((val & MS_INT_CED) || !(val & MS_INT_BREQ))
- break;
-
- retval = ms_transfer_tpc(chip, MS_TM_NORMAL_READ, PRO_READ_LONG_DATA, 0, WAIT_INT);
- if (retval != STATUS_SUCCESS) {
- kfree(buf);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- i++;
- } while (i < 1024);
-
- if (retval != STATUS_SUCCESS) {
- kfree(buf);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- if ((buf[0] != 0xa5) && (buf[1] != 0xc3)) {
- /* Signature code is wrong */
- kfree(buf);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- if ((buf[4] < 1) || (buf[4] > 12)) {
- kfree(buf);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- for (i = 0; i < buf[4]; i++) {
- int cur_addr_off = 16 + i * 12;
-
-#ifdef SUPPORT_MSXC
- if ((buf[cur_addr_off + 8] == 0x10) || (buf[cur_addr_off + 8] == 0x13))
-#else
- if (buf[cur_addr_off + 8] == 0x10)
-#endif
- {
- sys_info_addr = ((u32)buf[cur_addr_off + 0] << 24) |
- ((u32)buf[cur_addr_off + 1] << 16) |
- ((u32)buf[cur_addr_off + 2] << 8) | buf[cur_addr_off + 3];
- sys_info_size = ((u32)buf[cur_addr_off + 4] << 24) |
- ((u32)buf[cur_addr_off + 5] << 16) |
- ((u32)buf[cur_addr_off + 6] << 8) | buf[cur_addr_off + 7];
- RTSX_DEBUGP("sys_info_addr = 0x%x, sys_info_size = 0x%x\n",
- sys_info_addr, sys_info_size);
- if (sys_info_size != 96) {
- kfree(buf);
- TRACE_RET(chip, STATUS_FAIL);
- }
- if (sys_info_addr < 0x1A0) {
- kfree(buf);
- TRACE_RET(chip, STATUS_FAIL);
- }
- if ((sys_info_size + sys_info_addr) > 0x8000) {
- kfree(buf);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
-#ifdef SUPPORT_MSXC
- if (buf[cur_addr_off + 8] == 0x13)
- ms_card->ms_type |= MS_XC;
-#endif
-#ifdef SUPPORT_PCGL_1P18
- found_sys_info = 1;
-#else
- break;
-#endif
- }
-#ifdef SUPPORT_PCGL_1P18
- if (buf[cur_addr_off + 8] == 0x15) {
- model_name_addr = ((u32)buf[cur_addr_off + 0] << 24) |
- ((u32)buf[cur_addr_off + 1] << 16) |
- ((u32)buf[cur_addr_off + 2] << 8) | buf[cur_addr_off + 3];
- model_name_size = ((u32)buf[cur_addr_off + 4] << 24) |
- ((u32)buf[cur_addr_off + 5] << 16) |
- ((u32)buf[cur_addr_off + 6] << 8) | buf[cur_addr_off + 7];
- RTSX_DEBUGP("model_name_addr = 0x%x, model_name_size = 0x%x\n",
- model_name_addr, model_name_size);
- if (model_name_size != 48) {
- kfree(buf);
- TRACE_RET(chip, STATUS_FAIL);
- }
- if (model_name_addr < 0x1A0) {
- kfree(buf);
- TRACE_RET(chip, STATUS_FAIL);
- }
- if ((model_name_size + model_name_addr) > 0x8000) {
- kfree(buf);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- found_model_name = 1;
- }
-
- if (found_sys_info && found_model_name)
- break;
-#endif
- }
-
- if (i == buf[4]) {
- kfree(buf);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- class_code = buf[sys_info_addr + 0];
- device_type = buf[sys_info_addr + 56];
- sub_class = buf[sys_info_addr + 46];
-#ifdef SUPPORT_MSXC
- if (CHK_MSXC(ms_card)) {
- xc_total_blk = ((u32)buf[sys_info_addr + 6] << 24) |
- ((u32)buf[sys_info_addr + 7] << 16) |
- ((u32)buf[sys_info_addr + 8] << 8) |
- buf[sys_info_addr + 9];
- xc_blk_size = ((u32)buf[sys_info_addr + 32] << 24) |
- ((u32)buf[sys_info_addr + 33] << 16) |
- ((u32)buf[sys_info_addr + 34] << 8) |
- buf[sys_info_addr + 35];
- RTSX_DEBUGP("xc_total_blk = 0x%x, xc_blk_size = 0x%x\n", xc_total_blk, xc_blk_size);
- } else {
- total_blk = ((u16)buf[sys_info_addr + 6] << 8) | buf[sys_info_addr + 7];
- blk_size = ((u16)buf[sys_info_addr + 2] << 8) | buf[sys_info_addr + 3];
- RTSX_DEBUGP("total_blk = 0x%x, blk_size = 0x%x\n", total_blk, blk_size);
- }
-#else
- total_blk = ((u16)buf[sys_info_addr + 6] << 8) | buf[sys_info_addr + 7];
- blk_size = ((u16)buf[sys_info_addr + 2] << 8) | buf[sys_info_addr + 3];
- RTSX_DEBUGP("total_blk = 0x%x, blk_size = 0x%x\n", total_blk, blk_size);
-#endif
-
- RTSX_DEBUGP("class_code = 0x%x, device_type = 0x%x, sub_class = 0x%x\n",
- class_code, device_type, sub_class);
-
- memcpy(ms_card->raw_sys_info, buf + sys_info_addr, 96);
-#ifdef SUPPORT_PCGL_1P18
- memcpy(ms_card->raw_model_name, buf + model_name_addr, 48);
-#endif
-
- kfree(buf);
-
-#ifdef SUPPORT_MSXC
- if (CHK_MSXC(ms_card)) {
- if (class_code != 0x03)
- TRACE_RET(chip, STATUS_FAIL);
- } else {
- if (class_code != 0x02)
- TRACE_RET(chip, STATUS_FAIL);
- }
-#else
- if (class_code != 0x02)
- TRACE_RET(chip, STATUS_FAIL);
-#endif
-
- if (device_type != 0x00) {
- if ((device_type == 0x01) || (device_type == 0x02) ||
- (device_type == 0x03)) {
- chip->card_wp |= MS_CARD;
- } else {
- TRACE_RET(chip, STATUS_FAIL);
- }
- }
-
- if (sub_class & 0xC0)
- TRACE_RET(chip, STATUS_FAIL);
-
- RTSX_DEBUGP("class_code: 0x%x, device_type: 0x%x, sub_class: 0x%x\n",
- class_code, device_type, sub_class);
-
-#ifdef SUPPORT_MSXC
- if (CHK_MSXC(ms_card)) {
- chip->capacity[chip->card2lun[MS_CARD]] =
- ms_card->capacity = xc_total_blk * xc_blk_size;
- } else {
- chip->capacity[chip->card2lun[MS_CARD]] =
- ms_card->capacity = total_blk * blk_size;
- }
-#else
- chip->capacity[chip->card2lun[MS_CARD]] = ms_card->capacity = total_blk * blk_size;
-#endif
-
- return STATUS_SUCCESS;
-}
-
-#ifdef SUPPORT_MAGIC_GATE
-static int mg_set_tpc_para_sub(struct rtsx_chip *chip, int type, u8 mg_entry_num);
-#endif
-
-static int reset_ms_pro(struct rtsx_chip *chip)
-{
- struct ms_info *ms_card = &(chip->ms_card);
- int retval;
-#ifdef XC_POWERCLASS
- u8 change_power_class;
-
- if (chip->ms_power_class_en & 0x02)
- change_power_class = 2;
- else if (chip->ms_power_class_en & 0x01)
- change_power_class = 1;
- else
- change_power_class = 0;
-#endif
-
-#ifdef XC_POWERCLASS
-Retry:
-#endif
- retval = ms_pro_reset_flow(chip, 1);
- if (retval != STATUS_SUCCESS) {
- if (ms_card->switch_8bit_fail) {
- retval = ms_pro_reset_flow(chip, 0);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
- } else {
- TRACE_RET(chip, STATUS_FAIL);
- }
- }
-
- retval = ms_read_attribute_info(chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
-#ifdef XC_POWERCLASS
- if (CHK_HG8BIT(ms_card))
- change_power_class = 0;
-
- if (change_power_class && CHK_MSXC(ms_card)) {
- u8 power_class_en = chip->ms_power_class_en;
-
- RTSX_DEBUGP("power_class_en = 0x%x\n", power_class_en);
- RTSX_DEBUGP("change_power_class = %d\n", change_power_class);
-
- if (change_power_class)
- power_class_en &= (1 << (change_power_class - 1));
- else
- power_class_en = 0;
-
- if (power_class_en) {
- u8 power_class_mode = (ms_card->raw_sys_info[46] & 0x18) >> 3;
- RTSX_DEBUGP("power_class_mode = 0x%x", power_class_mode);
- if (change_power_class > power_class_mode)
- change_power_class = power_class_mode;
- if (change_power_class) {
- retval = msxc_change_power(chip, change_power_class);
- if (retval != STATUS_SUCCESS) {
- change_power_class--;
- goto Retry;
- }
- }
- }
- }
-#endif
-
-#ifdef SUPPORT_MAGIC_GATE
- retval = mg_set_tpc_para_sub(chip, 0, 0);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-#endif
-
- if (CHK_HG8BIT(ms_card))
- chip->card_bus_width[chip->card2lun[MS_CARD]] = 8;
- else
- chip->card_bus_width[chip->card2lun[MS_CARD]] = 4;
-
- return STATUS_SUCCESS;
-}
-
-static int ms_read_status_reg(struct rtsx_chip *chip)
-{
- int retval;
- u8 val[2];
-
- retval = ms_set_rw_reg_addr(chip, StatusReg0, 2, 0, 0);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- retval = ms_read_bytes(chip, READ_REG, 2, NO_WAIT_INT, val, 2);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- if (val[1] & (STS_UCDT | STS_UCEX | STS_UCFG)) {
- ms_set_err_code(chip, MS_FLASH_READ_ERROR);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- return STATUS_SUCCESS;
-}
-
-
-static int ms_read_extra_data(struct rtsx_chip *chip,
- u16 block_addr, u8 page_num, u8 *buf, int buf_len)
-{
- struct ms_info *ms_card = &(chip->ms_card);
- int retval, i;
- u8 val, data[10];
-
- retval = ms_set_rw_reg_addr(chip, OverwriteFlag, MS_EXTRA_SIZE, SystemParm, 6);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- if (CHK_MS4BIT(ms_card)) {
- /* Parallel interface */
- data[0] = 0x88;
- } else {
- /* Serial interface */
- data[0] = 0x80;
- }
- data[1] = 0;
- data[2] = (u8)(block_addr >> 8);
- data[3] = (u8)block_addr;
- data[4] = 0x40;
- data[5] = page_num;
-
- for (i = 0; i < MS_MAX_RETRY_COUNT; i++) {
- retval = ms_write_bytes(chip, WRITE_REG, 6, NO_WAIT_INT, data, 6);
- if (retval == STATUS_SUCCESS)
- break;
- }
- if (i == MS_MAX_RETRY_COUNT)
- TRACE_RET(chip, STATUS_FAIL);
-
- ms_set_err_code(chip, MS_NO_ERROR);
-
- for (i = 0; i < MS_MAX_RETRY_COUNT; i++) {
- retval = ms_send_cmd(chip, BLOCK_READ, WAIT_INT);
- if (retval == STATUS_SUCCESS)
- break;
- }
- if (i == MS_MAX_RETRY_COUNT)
- TRACE_RET(chip, STATUS_FAIL);
-
- ms_set_err_code(chip, MS_NO_ERROR);
- retval = ms_read_bytes(chip, GET_INT, 1, NO_WAIT_INT, &val, 1);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- if (val & INT_REG_CMDNK) {
- ms_set_err_code(chip, MS_CMD_NK);
- TRACE_RET(chip, STATUS_FAIL);
- }
- if (val & INT_REG_CED) {
- if (val & INT_REG_ERR) {
- retval = ms_read_status_reg(chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- retval = ms_set_rw_reg_addr(chip, OverwriteFlag, MS_EXTRA_SIZE, SystemParm, 6);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
- }
- }
-
- retval = ms_read_bytes(chip, READ_REG, MS_EXTRA_SIZE, NO_WAIT_INT, data, MS_EXTRA_SIZE);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- if (buf && buf_len) {
- if (buf_len > MS_EXTRA_SIZE)
- buf_len = MS_EXTRA_SIZE;
- memcpy(buf, data, buf_len);
- }
-
- return STATUS_SUCCESS;
-}
-
-static int ms_write_extra_data(struct rtsx_chip *chip,
- u16 block_addr, u8 page_num, u8 *buf, int buf_len)
-{
- struct ms_info *ms_card = &(chip->ms_card);
- int retval, i;
- u8 val, data[16];
-
- if (!buf || (buf_len < MS_EXTRA_SIZE))
- TRACE_RET(chip, STATUS_FAIL);
-
- retval = ms_set_rw_reg_addr(chip, OverwriteFlag, MS_EXTRA_SIZE, SystemParm, 6 + MS_EXTRA_SIZE);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- if (CHK_MS4BIT(ms_card))
- data[0] = 0x88;
- else
- data[0] = 0x80;
-
- data[1] = 0;
- data[2] = (u8)(block_addr >> 8);
- data[3] = (u8)block_addr;
- data[4] = 0x40;
- data[5] = page_num;
-
- for (i = 6; i < MS_EXTRA_SIZE + 6; i++)
- data[i] = buf[i - 6];
-
- retval = ms_write_bytes(chip, WRITE_REG , (6+MS_EXTRA_SIZE), NO_WAIT_INT, data, 16);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- retval = ms_send_cmd(chip, BLOCK_WRITE, WAIT_INT);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- ms_set_err_code(chip, MS_NO_ERROR);
- retval = ms_read_bytes(chip, GET_INT, 1, NO_WAIT_INT, &val, 1);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- if (val & INT_REG_CMDNK) {
- ms_set_err_code(chip, MS_CMD_NK);
- TRACE_RET(chip, STATUS_FAIL);
- }
- if (val & INT_REG_CED) {
- if (val & INT_REG_ERR) {
- ms_set_err_code(chip, MS_FLASH_WRITE_ERROR);
- TRACE_RET(chip, STATUS_FAIL);
- }
- }
-
- return STATUS_SUCCESS;
-}
-
-
-static int ms_read_page(struct rtsx_chip *chip, u16 block_addr, u8 page_num)
-{
- struct ms_info *ms_card = &(chip->ms_card);
- int retval;
- u8 val, data[6];
-
- retval = ms_set_rw_reg_addr(chip, OverwriteFlag, MS_EXTRA_SIZE, SystemParm, 6);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- if (CHK_MS4BIT(ms_card))
- data[0] = 0x88;
- else
- data[0] = 0x80;
-
- data[1] = 0;
- data[2] = (u8)(block_addr >> 8);
- data[3] = (u8)block_addr;
- data[4] = 0x20;
- data[5] = page_num;
-
- retval = ms_write_bytes(chip, WRITE_REG , 6, NO_WAIT_INT, data, 6);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- retval = ms_send_cmd(chip, BLOCK_READ, WAIT_INT);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- ms_set_err_code(chip, MS_NO_ERROR);
- retval = ms_read_bytes(chip, GET_INT, 1, NO_WAIT_INT, &val, 1);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- if (val & INT_REG_CMDNK) {
- ms_set_err_code(chip, MS_CMD_NK);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- if (val & INT_REG_CED) {
- if (val & INT_REG_ERR) {
- if (!(val & INT_REG_BREQ)) {
- ms_set_err_code(chip, MS_FLASH_READ_ERROR);
- TRACE_RET(chip, STATUS_FAIL);
- }
- retval = ms_read_status_reg(chip);
- if (retval != STATUS_SUCCESS)
- ms_set_err_code(chip, MS_FLASH_WRITE_ERROR);
-
- } else {
- if (!(val & INT_REG_BREQ)) {
- ms_set_err_code(chip, MS_BREQ_ERROR);
- TRACE_RET(chip, STATUS_FAIL);
- }
- }
- }
-
- retval = ms_transfer_tpc(chip, MS_TM_NORMAL_READ, READ_PAGE_DATA, 0, NO_WAIT_INT);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- if (ms_check_err_code(chip, MS_FLASH_WRITE_ERROR))
- TRACE_RET(chip, STATUS_FAIL);
-
- return STATUS_SUCCESS;
-}
-
-
-static int ms_set_bad_block(struct rtsx_chip *chip, u16 phy_blk)
-{
- struct ms_info *ms_card = &(chip->ms_card);
- int retval;
- u8 val, data[8], extra[MS_EXTRA_SIZE];
-
- retval = ms_read_extra_data(chip, phy_blk, 0, extra, MS_EXTRA_SIZE);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- retval = ms_set_rw_reg_addr(chip, OverwriteFlag, MS_EXTRA_SIZE, SystemParm, 7);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- ms_set_err_code(chip, MS_NO_ERROR);
-
- if (CHK_MS4BIT(ms_card))
- data[0] = 0x88;
- else
- data[0] = 0x80;
-
- data[1] = 0;
- data[2] = (u8)(phy_blk >> 8);
- data[3] = (u8)phy_blk;
- data[4] = 0x80;
- data[5] = 0;
- data[6] = extra[0] & 0x7F;
- data[7] = 0xFF;
-
- retval = ms_write_bytes(chip, WRITE_REG , 7, NO_WAIT_INT, data, 7);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- retval = ms_send_cmd(chip, BLOCK_WRITE, WAIT_INT);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- ms_set_err_code(chip, MS_NO_ERROR);
- retval = ms_read_bytes(chip, GET_INT, 1, NO_WAIT_INT, &val, 1);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- if (val & INT_REG_CMDNK) {
- ms_set_err_code(chip, MS_CMD_NK);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- if (val & INT_REG_CED) {
- if (val & INT_REG_ERR) {
- ms_set_err_code(chip, MS_FLASH_WRITE_ERROR);
- TRACE_RET(chip, STATUS_FAIL);
- }
- }
-
- return STATUS_SUCCESS;
-}
-
-
-static int ms_erase_block(struct rtsx_chip *chip, u16 phy_blk)
-{
- struct ms_info *ms_card = &(chip->ms_card);
- int retval, i = 0;
- u8 val, data[6];
-
- retval = ms_set_rw_reg_addr(chip, OverwriteFlag, MS_EXTRA_SIZE, SystemParm, 6);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- ms_set_err_code(chip, MS_NO_ERROR);
-
- if (CHK_MS4BIT(ms_card))
- data[0] = 0x88;
- else
- data[0] = 0x80;
-
- data[1] = 0;
- data[2] = (u8)(phy_blk >> 8);
- data[3] = (u8)phy_blk;
- data[4] = 0;
- data[5] = 0;
-
- retval = ms_write_bytes(chip, WRITE_REG, 6, NO_WAIT_INT, data, 6);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
-ERASE_RTY:
- retval = ms_send_cmd(chip, BLOCK_ERASE, WAIT_INT);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- ms_set_err_code(chip, MS_NO_ERROR);
- retval = ms_read_bytes(chip, GET_INT, 1, NO_WAIT_INT, &val, 1);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- if (val & INT_REG_CMDNK) {
- if (i < 3) {
- i++;
- goto ERASE_RTY;
- }
-
- ms_set_err_code(chip, MS_CMD_NK);
- ms_set_bad_block(chip, phy_blk);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- if (val & INT_REG_CED) {
- if (val & INT_REG_ERR) {
- ms_set_err_code(chip, MS_FLASH_WRITE_ERROR);
- TRACE_RET(chip, STATUS_FAIL);
- }
- }
-
- return STATUS_SUCCESS;
-}
-
-
-static void ms_set_page_status(u16 log_blk, u8 type, u8 *extra, int extra_len)
-{
- if (!extra || (extra_len < MS_EXTRA_SIZE))
- return;
-
- memset(extra, 0xFF, MS_EXTRA_SIZE);
-
- if (type == setPS_NG) {
- /* set page status as 1:NG,and block status keep 1:OK */
- extra[0] = 0xB8;
- } else {
- /* set page status as 0:Data Error,and block status keep 1:OK */
- extra[0] = 0x98;
- }
-
- extra[2] = (u8)(log_blk >> 8);
- extra[3] = (u8)log_blk;
-}
-
-static int ms_init_page(struct rtsx_chip *chip, u16 phy_blk, u16 log_blk, u8 start_page, u8 end_page)
-{
- int retval;
- u8 extra[MS_EXTRA_SIZE], i;
-
- memset(extra, 0xff, MS_EXTRA_SIZE);
-
- extra[0] = 0xf8; /* Block, page OK, data erased */
- extra[1] = 0xff;
- extra[2] = (u8)(log_blk >> 8);
- extra[3] = (u8)log_blk;
-
- for (i = start_page; i < end_page; i++) {
- if (detect_card_cd(chip, MS_CARD) != STATUS_SUCCESS) {
- ms_set_err_code(chip, MS_NO_CARD);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- retval = ms_write_extra_data(chip, phy_blk, i, extra, MS_EXTRA_SIZE);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- return STATUS_SUCCESS;
-}
-
-static int ms_copy_page(struct rtsx_chip *chip, u16 old_blk, u16 new_blk,
- u16 log_blk, u8 start_page, u8 end_page)
-{
- struct ms_info *ms_card = &(chip->ms_card);
- int retval, rty_cnt, uncorrect_flag = 0;
- u8 extra[MS_EXTRA_SIZE], val, i, j, data[16];
-
- RTSX_DEBUGP("Copy page from 0x%x to 0x%x, logical block is 0x%x\n",
- old_blk, new_blk, log_blk);
- RTSX_DEBUGP("start_page = %d, end_page = %d\n", start_page, end_page);
-
- retval = ms_read_extra_data(chip, new_blk, 0, extra, MS_EXTRA_SIZE);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- retval = ms_read_status_reg(chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- RTSX_READ_REG(chip, PPBUF_BASE2, &val);
-
- if (val & BUF_FULL) {
- retval = ms_send_cmd(chip, CLEAR_BUF, WAIT_INT);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- retval = ms_read_bytes(chip, GET_INT, 1, NO_WAIT_INT, &val, 1);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- if (!(val & INT_REG_CED)) {
- ms_set_err_code(chip, MS_FLASH_WRITE_ERROR);
- TRACE_RET(chip, STATUS_FAIL);
- }
- }
-
- for (i = start_page; i < end_page; i++) {
- if (detect_card_cd(chip, MS_CARD) != STATUS_SUCCESS) {
- ms_set_err_code(chip, MS_NO_CARD);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- ms_read_extra_data(chip, old_blk, i, extra, MS_EXTRA_SIZE);
-
- retval = ms_set_rw_reg_addr(chip, OverwriteFlag, MS_EXTRA_SIZE, SystemParm, 6);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- ms_set_err_code(chip, MS_NO_ERROR);
-
- if (CHK_MS4BIT(ms_card))
- data[0] = 0x88;
- else
- data[0] = 0x80;
-
- data[1] = 0;
- data[2] = (u8)(old_blk >> 8);
- data[3] = (u8)old_blk;
- data[4] = 0x20;
- data[5] = i;
-
- retval = ms_write_bytes(chip, WRITE_REG , 6, NO_WAIT_INT, data, 6);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- retval = ms_send_cmd(chip, BLOCK_READ, WAIT_INT);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- ms_set_err_code(chip, MS_NO_ERROR);
- retval = ms_read_bytes(chip, GET_INT, 1, NO_WAIT_INT, &val, 1);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- if (val & INT_REG_CMDNK) {
- ms_set_err_code(chip, MS_CMD_NK);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- if (val & INT_REG_CED) {
- if (val & INT_REG_ERR) {
- retval = ms_read_status_reg(chip);
- if (retval != STATUS_SUCCESS) {
- uncorrect_flag = 1;
- RTSX_DEBUGP("Uncorrectable error\n");
- } else {
- uncorrect_flag = 0;
- }
-
- retval = ms_transfer_tpc(chip, MS_TM_NORMAL_READ, READ_PAGE_DATA, 0, NO_WAIT_INT);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- if (uncorrect_flag) {
- ms_set_page_status(log_blk, setPS_NG, extra, MS_EXTRA_SIZE);
- if (i == 0)
- extra[0] &= 0xEF;
-
- ms_write_extra_data(chip, old_blk, i, extra, MS_EXTRA_SIZE);
- RTSX_DEBUGP("page %d : extra[0] = 0x%x\n", i, extra[0]);
- MS_SET_BAD_BLOCK_FLG(ms_card);
-
- ms_set_page_status(log_blk, setPS_Error, extra, MS_EXTRA_SIZE);
- ms_write_extra_data(chip, new_blk, i, extra, MS_EXTRA_SIZE);
- continue;
- }
-
- for (rty_cnt = 0; rty_cnt < MS_MAX_RETRY_COUNT; rty_cnt++) {
- retval = ms_transfer_tpc(chip, MS_TM_NORMAL_WRITE,
- WRITE_PAGE_DATA, 0, NO_WAIT_INT);
- if (retval == STATUS_SUCCESS)
- break;
- }
- if (rty_cnt == MS_MAX_RETRY_COUNT)
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- if (!(val & INT_REG_BREQ)) {
- ms_set_err_code(chip, MS_BREQ_ERROR);
- TRACE_RET(chip, STATUS_FAIL);
- }
- }
-
- retval = ms_set_rw_reg_addr(chip, OverwriteFlag,
- MS_EXTRA_SIZE, SystemParm, (6+MS_EXTRA_SIZE));
-
- ms_set_err_code(chip, MS_NO_ERROR);
-
- if (CHK_MS4BIT(ms_card))
- data[0] = 0x88;
- else
- data[0] = 0x80;
-
- data[1] = 0;
- data[2] = (u8)(new_blk >> 8);
- data[3] = (u8)new_blk;
- data[4] = 0x20;
- data[5] = i;
-
- if ((extra[0] & 0x60) != 0x60)
- data[6] = extra[0];
- else
- data[6] = 0xF8;
-
- data[6 + 1] = 0xFF;
- data[6 + 2] = (u8)(log_blk >> 8);
- data[6 + 3] = (u8)log_blk;
-
- for (j = 4; j <= MS_EXTRA_SIZE; j++)
- data[6 + j] = 0xFF;
-
- retval = ms_write_bytes(chip, WRITE_REG, (6 + MS_EXTRA_SIZE), NO_WAIT_INT, data, 16);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- retval = ms_send_cmd(chip, BLOCK_WRITE, WAIT_INT);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- ms_set_err_code(chip, MS_NO_ERROR);
- retval = ms_read_bytes(chip, GET_INT, 1, NO_WAIT_INT, &val, 1);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- if (val & INT_REG_CMDNK) {
- ms_set_err_code(chip, MS_CMD_NK);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- if (val & INT_REG_CED) {
- if (val & INT_REG_ERR) {
- ms_set_err_code(chip, MS_FLASH_WRITE_ERROR);
- TRACE_RET(chip, STATUS_FAIL);
- }
- }
-
- if (i == 0) {
- retval = ms_set_rw_reg_addr(chip, OverwriteFlag, MS_EXTRA_SIZE, SystemParm, 7);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- ms_set_err_code(chip, MS_NO_ERROR);
-
- if (CHK_MS4BIT(ms_card))
- data[0] = 0x88;
- else
- data[0] = 0x80;
-
- data[1] = 0;
- data[2] = (u8)(old_blk >> 8);
- data[3] = (u8)old_blk;
- data[4] = 0x80;
- data[5] = 0;
- data[6] = 0xEF;
- data[7] = 0xFF;
-
- retval = ms_write_bytes(chip, WRITE_REG, 7, NO_WAIT_INT, data, 8);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- retval = ms_send_cmd(chip, BLOCK_WRITE, WAIT_INT);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- ms_set_err_code(chip, MS_NO_ERROR);
- retval = ms_read_bytes(chip, GET_INT, 1, NO_WAIT_INT, &val, 1);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- if (val & INT_REG_CMDNK) {
- ms_set_err_code(chip, MS_CMD_NK);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- if (val & INT_REG_CED) {
- if (val & INT_REG_ERR) {
- ms_set_err_code(chip, MS_FLASH_WRITE_ERROR);
- TRACE_RET(chip, STATUS_FAIL);
- }
- }
- }
- }
-
- return STATUS_SUCCESS;
-}
-
-
-static int reset_ms(struct rtsx_chip *chip)
-{
- struct ms_info *ms_card = &(chip->ms_card);
- int retval;
- u16 i, reg_addr, block_size;
- u8 val, extra[MS_EXTRA_SIZE], j, *ptr;
-#ifndef SUPPORT_MAGIC_GATE
- u16 eblock_cnt;
-#endif
-
- retval = ms_prepare_reset(chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- ms_card->ms_type |= TYPE_MS;
-
- retval = ms_send_cmd(chip, MS_RESET, NO_WAIT_INT);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- retval = ms_read_status_reg(chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- RTSX_READ_REG(chip, PPBUF_BASE2, &val);
- if (val & WRT_PRTCT)
- chip->card_wp |= MS_CARD;
- else
- chip->card_wp &= ~MS_CARD;
-
- i = 0;
-
-RE_SEARCH:
- /* Search Boot Block */
- while (i < (MAX_DEFECTIVE_BLOCK + 2)) {
- if (detect_card_cd(chip, MS_CARD) != STATUS_SUCCESS) {
- ms_set_err_code(chip, MS_NO_CARD);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- retval = ms_read_extra_data(chip, i, 0, extra, MS_EXTRA_SIZE);
- if (retval != STATUS_SUCCESS) {
- i++;
- continue;
- }
-
- if (extra[0] & BLOCK_OK) {
- if (!(extra[1] & NOT_BOOT_BLOCK)) {
- ms_card->boot_block = i;
- break;
- }
- }
- i++;
- }
-
- if (i == (MAX_DEFECTIVE_BLOCK + 2)) {
- RTSX_DEBUGP("No boot block found!");
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- for (j = 0; j < 3; j++) {
- retval = ms_read_page(chip, ms_card->boot_block, j);
- if (retval != STATUS_SUCCESS) {
- if (ms_check_err_code(chip, MS_FLASH_WRITE_ERROR)) {
- i = ms_card->boot_block + 1;
- ms_set_err_code(chip, MS_NO_ERROR);
- goto RE_SEARCH;
- }
- }
- }
-
- retval = ms_read_page(chip, ms_card->boot_block, 0);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- /* Read MS system information as sys_info */
- rtsx_init_cmd(chip);
-
- for (i = 0; i < 96; i++)
- rtsx_add_cmd(chip, READ_REG_CMD, PPBUF_BASE2 + 0x1A0 + i, 0, 0);
-
- retval = rtsx_send_cmd(chip, MS_CARD, 100);
- if (retval < 0)
- TRACE_RET(chip, STATUS_FAIL);
-
- ptr = rtsx_get_cmd_data(chip);
- memcpy(ms_card->raw_sys_info, ptr, 96);
-
- /* Read useful block contents */
- rtsx_init_cmd(chip);
-
- rtsx_add_cmd(chip, READ_REG_CMD, HEADER_ID0, 0, 0);
- rtsx_add_cmd(chip, READ_REG_CMD, HEADER_ID1, 0, 0);
-
- for (reg_addr = DISABLED_BLOCK0; reg_addr <= DISABLED_BLOCK3; reg_addr++)
- rtsx_add_cmd(chip, READ_REG_CMD, reg_addr, 0, 0);
-
- for (reg_addr = BLOCK_SIZE_0; reg_addr <= PAGE_SIZE_1; reg_addr++)
- rtsx_add_cmd(chip, READ_REG_CMD, reg_addr, 0, 0);
-
- rtsx_add_cmd(chip, READ_REG_CMD, MS_Device_Type, 0, 0);
- rtsx_add_cmd(chip, READ_REG_CMD, MS_4bit_Support, 0, 0);
-
- retval = rtsx_send_cmd(chip, MS_CARD, 100);
- if (retval < 0)
- TRACE_RET(chip, STATUS_FAIL);
-
- ptr = rtsx_get_cmd_data(chip);
-
- RTSX_DEBUGP("Boot block data:\n");
- RTSX_DUMP(ptr, 16);
-
- /* Block ID error
- * HEADER_ID0, HEADER_ID1
- */
- if (ptr[0] != 0x00 || ptr[1] != 0x01) {
- i = ms_card->boot_block + 1;
- goto RE_SEARCH;
- }
-
- /* Page size error
- * PAGE_SIZE_0, PAGE_SIZE_1
- */
- if (ptr[12] != 0x02 || ptr[13] != 0x00) {
- i = ms_card->boot_block + 1;
- goto RE_SEARCH;
- }
-
- if ((ptr[14] == 1) || (ptr[14] == 3))
- chip->card_wp |= MS_CARD;
-
- /* BLOCK_SIZE_0, BLOCK_SIZE_1 */
- block_size = ((u16)ptr[6] << 8) | ptr[7];
- if (block_size == 0x0010) {
- /* Block size 16KB */
- ms_card->block_shift = 5;
- ms_card->page_off = 0x1F;
- } else if (block_size == 0x0008) {
- /* Block size 8KB */
- ms_card->block_shift = 4;
- ms_card->page_off = 0x0F;
- }
-
- /* BLOCK_COUNT_0, BLOCK_COUNT_1 */
- ms_card->total_block = ((u16)ptr[8] << 8) | ptr[9];
-
-#ifdef SUPPORT_MAGIC_GATE
- j = ptr[10];
-
- if (ms_card->block_shift == 4) { /* 4MB or 8MB */
- if (j < 2) { /* Effective block for 4MB: 0x1F0 */
- ms_card->capacity = 0x1EE0;
- } else { /* Effective block for 8MB: 0x3E0 */
- ms_card->capacity = 0x3DE0;
- }
- } else { /* 16MB, 32MB, 64MB or 128MB */
- if (j < 5) { /* Effective block for 16MB: 0x3E0 */
- ms_card->capacity = 0x7BC0;
- } else if (j < 0xA) { /* Effective block for 32MB: 0x7C0 */
- ms_card->capacity = 0xF7C0;
- } else if (j < 0x11) { /* Effective block for 64MB: 0xF80 */
- ms_card->capacity = 0x1EF80;
- } else { /* Effective block for 128MB: 0x1F00 */
- ms_card->capacity = 0x3DF00;
- }
- }
-#else
- /* EBLOCK_COUNT_0, EBLOCK_COUNT_1 */
- eblock_cnt = ((u16)ptr[10] << 8) | ptr[11];
-
- ms_card->capacity = ((u32)eblock_cnt - 2) << ms_card->block_shift;
-#endif
-
- chip->capacity[chip->card2lun[MS_CARD]] = ms_card->capacity;
-
- /* Switch I/F Mode */
- if (ptr[15]) {
- retval = ms_set_rw_reg_addr(chip, 0, 0, SystemParm, 1);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- RTSX_WRITE_REG(chip, PPBUF_BASE2, 0xFF, 0x88);
- RTSX_WRITE_REG(chip, PPBUF_BASE2 + 1, 0xFF, 0);
-
- retval = ms_transfer_tpc(chip, MS_TM_WRITE_BYTES, WRITE_REG , 1, NO_WAIT_INT);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- RTSX_WRITE_REG(chip, MS_CFG, 0x58 | MS_NO_CHECK_INT,
- MS_BUS_WIDTH_4 | PUSH_TIME_ODD | MS_NO_CHECK_INT);
-
- ms_card->ms_type |= MS_4BIT;
- }
-
- if (CHK_MS4BIT(ms_card))
- chip->card_bus_width[chip->card2lun[MS_CARD]] = 4;
- else
- chip->card_bus_width[chip->card2lun[MS_CARD]] = 1;
-
- return STATUS_SUCCESS;
-}
-
-static int ms_init_l2p_tbl(struct rtsx_chip *chip)
-{
- struct ms_info *ms_card = &(chip->ms_card);
- int size, i, seg_no, retval;
- u16 defect_block, reg_addr;
- u8 val1, val2;
-
- ms_card->segment_cnt = ms_card->total_block >> 9;
- RTSX_DEBUGP("ms_card->segment_cnt = %d\n", ms_card->segment_cnt);
-
- size = ms_card->segment_cnt * sizeof(struct zone_entry);
- ms_card->segment = vzalloc(size);
- if (ms_card->segment == NULL)
- TRACE_RET(chip, STATUS_FAIL);
-
- retval = ms_read_page(chip, ms_card->boot_block, 1);
- if (retval != STATUS_SUCCESS)
- TRACE_GOTO(chip, INIT_FAIL);
-
- reg_addr = PPBUF_BASE2;
- for (i = 0; i < (((ms_card->total_block >> 9) * 10) + 1); i++) {
- retval = rtsx_read_register(chip, reg_addr++, &val1);
- if (retval != STATUS_SUCCESS)
- TRACE_GOTO(chip, INIT_FAIL);
-
- retval = rtsx_read_register(chip, reg_addr++, &val2);
- if (retval != STATUS_SUCCESS)
- TRACE_GOTO(chip, INIT_FAIL);
-
- defect_block = ((u16)val1 << 8) | val2;
- if (defect_block == 0xFFFF)
- break;
-
- seg_no = defect_block / 512;
- ms_card->segment[seg_no].defect_list[ms_card->segment[seg_no].disable_count++] = defect_block;
- }
-
- for (i = 0; i < ms_card->segment_cnt; i++) {
- ms_card->segment[i].build_flag = 0;
- ms_card->segment[i].l2p_table = NULL;
- ms_card->segment[i].free_table = NULL;
- ms_card->segment[i].get_index = 0;
- ms_card->segment[i].set_index = 0;
- ms_card->segment[i].unused_blk_cnt = 0;
-
- RTSX_DEBUGP("defective block count of segment %d is %d\n",
- i, ms_card->segment[i].disable_count);
- }
-
- return STATUS_SUCCESS;
-
-INIT_FAIL:
- if (ms_card->segment) {
- vfree(ms_card->segment);
- ms_card->segment = NULL;
- }
-
- return STATUS_FAIL;
-}
-
-static u16 ms_get_l2p_tbl(struct rtsx_chip *chip, int seg_no, u16 log_off)
-{
- struct ms_info *ms_card = &(chip->ms_card);
- struct zone_entry *segment;
-
- if (ms_card->segment == NULL)
- return 0xFFFF;
-
- segment = &(ms_card->segment[seg_no]);
-
- if (segment->l2p_table)
- return segment->l2p_table[log_off];
-
- return 0xFFFF;
-}
-
-static void ms_set_l2p_tbl(struct rtsx_chip *chip, int seg_no, u16 log_off, u16 phy_blk)
-{
- struct ms_info *ms_card = &(chip->ms_card);
- struct zone_entry *segment;
-
- if (ms_card->segment == NULL)
- return;
-
- segment = &(ms_card->segment[seg_no]);
- if (segment->l2p_table)
- segment->l2p_table[log_off] = phy_blk;
-}
-
-static void ms_set_unused_block(struct rtsx_chip *chip, u16 phy_blk)
-{
- struct ms_info *ms_card = &(chip->ms_card);
- struct zone_entry *segment;
- int seg_no;
-
- seg_no = (int)phy_blk >> 9;
- segment = &(ms_card->segment[seg_no]);
-
- segment->free_table[segment->set_index++] = phy_blk;
- if (segment->set_index >= MS_FREE_TABLE_CNT)
- segment->set_index = 0;
-
- segment->unused_blk_cnt++;
-}
-
-static u16 ms_get_unused_block(struct rtsx_chip *chip, int seg_no)
-{
- struct ms_info *ms_card = &(chip->ms_card);
- struct zone_entry *segment;
- u16 phy_blk;
-
- segment = &(ms_card->segment[seg_no]);
-
- if (segment->unused_blk_cnt <= 0)
- return 0xFFFF;
-
- phy_blk = segment->free_table[segment->get_index];
- segment->free_table[segment->get_index++] = 0xFFFF;
- if (segment->get_index >= MS_FREE_TABLE_CNT)
- segment->get_index = 0;
-
- segment->unused_blk_cnt--;
-
- return phy_blk;
-}
-
-static const unsigned short ms_start_idx[] = {0, 494, 990, 1486, 1982, 2478, 2974, 3470,
- 3966, 4462, 4958, 5454, 5950, 6446, 6942, 7438, 7934};
-
-static int ms_arbitrate_l2p(struct rtsx_chip *chip, u16 phy_blk, u16 log_off, u8 us1, u8 us2)
-{
- struct ms_info *ms_card = &(chip->ms_card);
- struct zone_entry *segment;
- int seg_no;
- u16 tmp_blk;
-
- seg_no = (int)phy_blk >> 9;
- segment = &(ms_card->segment[seg_no]);
- tmp_blk = segment->l2p_table[log_off];
-
- if (us1 != us2) {
- if (us1 == 0) {
- if (!(chip->card_wp & MS_CARD))
- ms_erase_block(chip, tmp_blk);
-
- ms_set_unused_block(chip, tmp_blk);
- segment->l2p_table[log_off] = phy_blk;
- } else {
- if (!(chip->card_wp & MS_CARD))
- ms_erase_block(chip, phy_blk);
-
- ms_set_unused_block(chip, phy_blk);
- }
- } else {
- if (phy_blk < tmp_blk) {
- if (!(chip->card_wp & MS_CARD))
- ms_erase_block(chip, phy_blk);
-
- ms_set_unused_block(chip, phy_blk);
- } else {
- if (!(chip->card_wp & MS_CARD))
- ms_erase_block(chip, tmp_blk);
-
- ms_set_unused_block(chip, tmp_blk);
- segment->l2p_table[log_off] = phy_blk;
- }
- }
-
- return STATUS_SUCCESS;
-}
-
-static int ms_build_l2p_tbl(struct rtsx_chip *chip, int seg_no)
-{
- struct ms_info *ms_card = &(chip->ms_card);
- struct zone_entry *segment;
- int retval, table_size, disable_cnt, defect_flag, i;
- u16 start, end, phy_blk, log_blk, tmp_blk;
- u8 extra[MS_EXTRA_SIZE], us1, us2;
-
- RTSX_DEBUGP("ms_build_l2p_tbl: %d\n", seg_no);
-
- if (ms_card->segment == NULL) {
- retval = ms_init_l2p_tbl(chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, retval);
- }
-
- if (ms_card->segment[seg_no].build_flag) {
- RTSX_DEBUGP("l2p table of segment %d has been built\n", seg_no);
- return STATUS_SUCCESS;
- }
-
- if (seg_no == 0)
- table_size = 494;
- else
- table_size = 496;
-
- segment = &(ms_card->segment[seg_no]);
-
- if (segment->l2p_table == NULL) {
- segment->l2p_table = (u16 *)vmalloc(table_size * 2);
- if (segment->l2p_table == NULL)
- TRACE_GOTO(chip, BUILD_FAIL);
- }
- memset((u8 *)(segment->l2p_table), 0xff, table_size * 2);
-
- if (segment->free_table == NULL) {
- segment->free_table = (u16 *)vmalloc(MS_FREE_TABLE_CNT * 2);
- if (segment->free_table == NULL)
- TRACE_GOTO(chip, BUILD_FAIL);
- }
- memset((u8 *)(segment->free_table), 0xff, MS_FREE_TABLE_CNT * 2);
-
- start = (u16)seg_no << 9;
- end = (u16)(seg_no + 1) << 9;
-
- disable_cnt = segment->disable_count;
-
- segment->get_index = segment->set_index = 0;
- segment->unused_blk_cnt = 0;
-
- for (phy_blk = start; phy_blk < end; phy_blk++) {
- if (disable_cnt) {
- defect_flag = 0;
- for (i = 0; i < segment->disable_count; i++) {
- if (phy_blk == segment->defect_list[i]) {
- defect_flag = 1;
- break;
- }
- }
- if (defect_flag) {
- disable_cnt--;
- continue;
- }
- }
-
- retval = ms_read_extra_data(chip, phy_blk, 0, extra, MS_EXTRA_SIZE);
- if (retval != STATUS_SUCCESS) {
- RTSX_DEBUGP("read extra data fail\n");
- ms_set_bad_block(chip, phy_blk);
- continue;
- }
-
- if (seg_no == ms_card->segment_cnt - 1) {
- if (!(extra[1] & NOT_TRANSLATION_TABLE)) {
- if (!(chip->card_wp & MS_CARD)) {
- retval = ms_erase_block(chip, phy_blk);
- if (retval != STATUS_SUCCESS)
- continue;
- extra[2] = 0xff;
- extra[3] = 0xff;
- }
- }
- }
-
- if (!(extra[0] & BLOCK_OK))
- continue;
- if (!(extra[1] & NOT_BOOT_BLOCK))
- continue;
- if ((extra[0] & PAGE_OK) != PAGE_OK)
- continue;
-
- log_blk = ((u16)extra[2] << 8) | extra[3];
-
- if (log_blk == 0xFFFF) {
- if (!(chip->card_wp & MS_CARD)) {
- retval = ms_erase_block(chip, phy_blk);
- if (retval != STATUS_SUCCESS)
- continue;
- }
- ms_set_unused_block(chip, phy_blk);
- continue;
- }
-
- if ((log_blk < ms_start_idx[seg_no]) ||
- (log_blk >= ms_start_idx[seg_no+1])) {
- if (!(chip->card_wp & MS_CARD)) {
- retval = ms_erase_block(chip, phy_blk);
- if (retval != STATUS_SUCCESS)
- continue;
- }
- ms_set_unused_block(chip, phy_blk);
- continue;
- }
-
- if (segment->l2p_table[log_blk - ms_start_idx[seg_no]] == 0xFFFF) {
- segment->l2p_table[log_blk - ms_start_idx[seg_no]] = phy_blk;
- continue;
- }
-
- us1 = extra[0] & 0x10;
- tmp_blk = segment->l2p_table[log_blk - ms_start_idx[seg_no]];
- retval = ms_read_extra_data(chip, tmp_blk, 0, extra, MS_EXTRA_SIZE);
- if (retval != STATUS_SUCCESS)
- continue;
- us2 = extra[0] & 0x10;
-
- (void)ms_arbitrate_l2p(chip, phy_blk, log_blk-ms_start_idx[seg_no], us1, us2);
- continue;
- }
-
- segment->build_flag = 1;
-
- RTSX_DEBUGP("unused block count: %d\n", segment->unused_blk_cnt);
-
- /* Logical Address Confirmation Process */
- if (seg_no == ms_card->segment_cnt - 1) {
- if (segment->unused_blk_cnt < 2)
- chip->card_wp |= MS_CARD;
- } else {
- if (segment->unused_blk_cnt < 1)
- chip->card_wp |= MS_CARD;
- }
-
- if (chip->card_wp & MS_CARD)
- return STATUS_SUCCESS;
-
- for (log_blk = ms_start_idx[seg_no]; log_blk < ms_start_idx[seg_no + 1]; log_blk++) {
- if (segment->l2p_table[log_blk-ms_start_idx[seg_no]] == 0xFFFF) {
- phy_blk = ms_get_unused_block(chip, seg_no);
- if (phy_blk == 0xFFFF) {
- chip->card_wp |= MS_CARD;
- return STATUS_SUCCESS;
- }
- retval = ms_init_page(chip, phy_blk, log_blk, 0, 1);
- if (retval != STATUS_SUCCESS)
- TRACE_GOTO(chip, BUILD_FAIL);
-
- segment->l2p_table[log_blk-ms_start_idx[seg_no]] = phy_blk;
- if (seg_no == ms_card->segment_cnt - 1) {
- if (segment->unused_blk_cnt < 2) {
- chip->card_wp |= MS_CARD;
- return STATUS_SUCCESS;
- }
- } else {
- if (segment->unused_blk_cnt < 1) {
- chip->card_wp |= MS_CARD;
- return STATUS_SUCCESS;
- }
- }
- }
- }
-
- /* Make boot block be the first normal block */
- if (seg_no == 0) {
- for (log_blk = 0; log_blk < 494; log_blk++) {
- tmp_blk = segment->l2p_table[log_blk];
- if (tmp_blk < ms_card->boot_block) {
- RTSX_DEBUGP("Boot block is not the first normal block.\n");
-
- if (chip->card_wp & MS_CARD)
- break;
-
- phy_blk = ms_get_unused_block(chip, 0);
- retval = ms_copy_page(chip, tmp_blk, phy_blk,
- log_blk, 0, ms_card->page_off + 1);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- segment->l2p_table[log_blk] = phy_blk;
-
- retval = ms_set_bad_block(chip, tmp_blk);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
- }
- }
- }
-
- return STATUS_SUCCESS;
-
-BUILD_FAIL:
- segment->build_flag = 0;
- if (segment->l2p_table) {
- vfree(segment->l2p_table);
- segment->l2p_table = NULL;
- }
- if (segment->free_table) {
- vfree(segment->free_table);
- segment->free_table = NULL;
- }
-
- return STATUS_FAIL;
-}
-
-
-int reset_ms_card(struct rtsx_chip *chip)
-{
- struct ms_info *ms_card = &(chip->ms_card);
- int retval;
-
- memset(ms_card, 0, sizeof(struct ms_info));
-
- retval = enable_card_clock(chip, MS_CARD);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- retval = select_card(chip, MS_CARD);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- ms_card->ms_type = 0;
-
- retval = reset_ms_pro(chip);
- if (retval != STATUS_SUCCESS) {
- if (ms_card->check_ms_flow) {
- retval = reset_ms(chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
- } else {
- TRACE_RET(chip, STATUS_FAIL);
- }
- }
-
- retval = ms_set_init_para(chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- if (!CHK_MSPRO(ms_card)) {
- /* Build table for the last segment,
- * to check if L2P table block exists, erasing it
- */
- retval = ms_build_l2p_tbl(chip, ms_card->total_block / 512 - 1);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- RTSX_DEBUGP("ms_card->ms_type = 0x%x\n", ms_card->ms_type);
-
- return STATUS_SUCCESS;
-}
-
-static int mspro_set_rw_cmd(struct rtsx_chip *chip, u32 start_sec, u16 sec_cnt, u8 cmd)
-{
- int retval, i;
- u8 data[8];
-
- data[0] = cmd;
- data[1] = (u8)(sec_cnt >> 8);
- data[2] = (u8)sec_cnt;
- data[3] = (u8)(start_sec >> 24);
- data[4] = (u8)(start_sec >> 16);
- data[5] = (u8)(start_sec >> 8);
- data[6] = (u8)start_sec;
- data[7] = 0;
-
- for (i = 0; i < MS_MAX_RETRY_COUNT; i++) {
- retval = ms_write_bytes(chip, PRO_EX_SET_CMD, 7, WAIT_INT, data, 8);
- if (retval == STATUS_SUCCESS)
- break;
- }
- if (i == MS_MAX_RETRY_COUNT)
- TRACE_RET(chip, STATUS_FAIL);
-
- return STATUS_SUCCESS;
-}
-
-
-void mspro_stop_seq_mode(struct rtsx_chip *chip)
-{
- struct ms_info *ms_card = &(chip->ms_card);
- int retval;
-
- RTSX_DEBUGP("--%s--\n", __func__);
-
- if (ms_card->seq_mode) {
- retval = ms_switch_clock(chip);
- if (retval != STATUS_SUCCESS)
- return;
-
- ms_card->seq_mode = 0;
- ms_card->total_sec_cnt = 0;
- ms_send_cmd(chip, PRO_STOP, WAIT_INT);
-
- rtsx_write_register(chip, RBCTL, RB_FLUSH, RB_FLUSH);
- }
-}
-
-static inline int ms_auto_tune_clock(struct rtsx_chip *chip)
-{
- struct ms_info *ms_card = &(chip->ms_card);
- int retval;
-
- RTSX_DEBUGP("--%s--\n", __func__);
-
- if (chip->asic_code) {
- if (ms_card->ms_clock > 30)
- ms_card->ms_clock -= 20;
- } else {
- if (ms_card->ms_clock == CLK_80)
- ms_card->ms_clock = CLK_60;
- else if (ms_card->ms_clock == CLK_60)
- ms_card->ms_clock = CLK_40;
- }
-
- retval = ms_switch_clock(chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- return STATUS_SUCCESS;
-}
-
-static int mspro_rw_multi_sector(struct scsi_cmnd *srb, struct rtsx_chip *chip, u32 start_sector, u16 sector_cnt)
-{
- struct ms_info *ms_card = &(chip->ms_card);
- int retval, mode_2k = 0;
- u16 count;
- u8 val, trans_mode, rw_tpc, rw_cmd;
-
- ms_set_err_code(chip, MS_NO_ERROR);
-
- ms_card->cleanup_counter = 0;
-
- if (CHK_MSHG(ms_card)) {
- if ((start_sector % 4) || (sector_cnt % 4)) {
- if (srb->sc_data_direction == DMA_FROM_DEVICE) {
- rw_tpc = PRO_READ_LONG_DATA;
- rw_cmd = PRO_READ_DATA;
- } else {
- rw_tpc = PRO_WRITE_LONG_DATA;
- rw_cmd = PRO_WRITE_DATA;
- }
- } else {
- if (srb->sc_data_direction == DMA_FROM_DEVICE) {
- rw_tpc = PRO_READ_QUAD_DATA;
- rw_cmd = PRO_READ_2K_DATA;
- } else {
- rw_tpc = PRO_WRITE_QUAD_DATA;
- rw_cmd = PRO_WRITE_2K_DATA;
- }
- mode_2k = 1;
- }
- } else {
- if (srb->sc_data_direction == DMA_FROM_DEVICE) {
- rw_tpc = PRO_READ_LONG_DATA;
- rw_cmd = PRO_READ_DATA;
- } else {
- rw_tpc = PRO_WRITE_LONG_DATA;
- rw_cmd = PRO_WRITE_DATA;
- }
- }
-
- retval = ms_switch_clock(chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- if (srb->sc_data_direction == DMA_FROM_DEVICE)
- trans_mode = MS_TM_AUTO_READ;
- else
- trans_mode = MS_TM_AUTO_WRITE;
-
- RTSX_READ_REG(chip, MS_TRANS_CFG, &val);
-
- if (ms_card->seq_mode) {
- if ((ms_card->pre_dir != srb->sc_data_direction)
- || ((ms_card->pre_sec_addr + ms_card->pre_sec_cnt) != start_sector)
- || (mode_2k && (ms_card->seq_mode & MODE_512_SEQ))
- || (!mode_2k && (ms_card->seq_mode & MODE_2K_SEQ))
- || !(val & MS_INT_BREQ)
- || ((ms_card->total_sec_cnt + sector_cnt) > 0xFE00)) {
- ms_card->seq_mode = 0;
- ms_card->total_sec_cnt = 0;
- if (val & MS_INT_BREQ) {
- retval = ms_send_cmd(chip, PRO_STOP, WAIT_INT);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- rtsx_write_register(chip, RBCTL, RB_FLUSH, RB_FLUSH);
- }
- }
- }
-
- if (!ms_card->seq_mode) {
- ms_card->total_sec_cnt = 0;
- if (sector_cnt >= SEQ_START_CRITERIA) {
- if ((ms_card->capacity - start_sector) > 0xFE00)
- count = 0xFE00;
- else
- count = (u16)(ms_card->capacity - start_sector);
-
- if (count > sector_cnt) {
- if (mode_2k)
- ms_card->seq_mode |= MODE_2K_SEQ;
- else
- ms_card->seq_mode |= MODE_512_SEQ;
- }
- } else {
- count = sector_cnt;
- }
- retval = mspro_set_rw_cmd(chip, start_sector, count, rw_cmd);
- if (retval != STATUS_SUCCESS) {
- ms_card->seq_mode = 0;
- TRACE_RET(chip, STATUS_FAIL);
- }
- }
-
- retval = ms_transfer_data(chip, trans_mode, rw_tpc, sector_cnt, WAIT_INT, mode_2k,
- scsi_sg_count(srb), scsi_sglist(srb), scsi_bufflen(srb));
- if (retval != STATUS_SUCCESS) {
- ms_card->seq_mode = 0;
- rtsx_read_register(chip, MS_TRANS_CFG, &val);
- rtsx_clear_ms_error(chip);
-
- if (detect_card_cd(chip, MS_CARD) != STATUS_SUCCESS) {
- chip->rw_need_retry = 0;
- RTSX_DEBUGP("No card exist, exit mspro_rw_multi_sector\n");
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- if (val & MS_INT_BREQ)
- ms_send_cmd(chip, PRO_STOP, WAIT_INT);
-
- if (val & (MS_CRC16_ERR | MS_RDY_TIMEOUT)) {
- RTSX_DEBUGP("MSPro CRC error, tune clock!\n");
- chip->rw_need_retry = 1;
- ms_auto_tune_clock(chip);
- }
-
- TRACE_RET(chip, retval);
- }
-
- if (ms_card->seq_mode) {
- ms_card->pre_sec_addr = start_sector;
- ms_card->pre_sec_cnt = sector_cnt;
- ms_card->pre_dir = srb->sc_data_direction;
- ms_card->total_sec_cnt += sector_cnt;
- }
-
- return STATUS_SUCCESS;
-}
-
-static int mspro_read_format_progress(struct rtsx_chip *chip, const int short_data_len)
-{
- struct ms_info *ms_card = &(chip->ms_card);
- int retval, i;
- u32 total_progress, cur_progress;
- u8 cnt, tmp;
- u8 data[8];
-
- RTSX_DEBUGP("mspro_read_format_progress, short_data_len = %d\n", short_data_len);
-
- retval = ms_switch_clock(chip);
- if (retval != STATUS_SUCCESS) {
- ms_card->format_status = FORMAT_FAIL;
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- retval = rtsx_read_register(chip, MS_TRANS_CFG, &tmp);
- if (retval != STATUS_SUCCESS) {
- ms_card->format_status = FORMAT_FAIL;
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- if (!(tmp & MS_INT_BREQ)) {
- if ((tmp & (MS_INT_CED | MS_INT_BREQ | MS_INT_CMDNK | MS_INT_ERR)) == MS_INT_CED) {
- ms_card->format_status = FORMAT_SUCCESS;
- return STATUS_SUCCESS;
- }
- ms_card->format_status = FORMAT_FAIL;
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- if (short_data_len >= 256)
- cnt = 0;
- else
- cnt = (u8)short_data_len;
-
- retval = rtsx_write_register(chip, MS_CFG, MS_NO_CHECK_INT, MS_NO_CHECK_INT);
- if (retval != STATUS_SUCCESS) {
- ms_card->format_status = FORMAT_FAIL;
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- retval = ms_read_bytes(chip, PRO_READ_SHORT_DATA, cnt, WAIT_INT, data, 8);
- if (retval != STATUS_SUCCESS) {
- ms_card->format_status = FORMAT_FAIL;
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- total_progress = (data[0] << 24) | (data[1] << 16) | (data[2] << 8) | data[3];
- cur_progress = (data[4] << 24) | (data[5] << 16) | (data[6] << 8) | data[7];
-
- RTSX_DEBUGP("total_progress = %d, cur_progress = %d\n",
- total_progress, cur_progress);
-
- if (total_progress == 0) {
- ms_card->progress = 0;
- } else {
- u64 ulltmp = (u64)cur_progress * (u64)65535;
- do_div(ulltmp, total_progress);
- ms_card->progress = (u16)ulltmp;
- }
- RTSX_DEBUGP("progress = %d\n", ms_card->progress);
-
- for (i = 0; i < 5000; i++) {
- retval = rtsx_read_register(chip, MS_TRANS_CFG, &tmp);
- if (retval != STATUS_SUCCESS) {
- ms_card->format_status = FORMAT_FAIL;
- TRACE_RET(chip, STATUS_FAIL);
- }
- if (tmp & (MS_INT_CED | MS_INT_CMDNK | MS_INT_BREQ | MS_INT_ERR))
- break;
-
- wait_timeout(1);
- }
-
- retval = rtsx_write_register(chip, MS_CFG, MS_NO_CHECK_INT, 0);
- if (retval != STATUS_SUCCESS) {
- ms_card->format_status = FORMAT_FAIL;
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- if (i == 5000) {
- ms_card->format_status = FORMAT_FAIL;
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- if (tmp & (MS_INT_CMDNK | MS_INT_ERR)) {
- ms_card->format_status = FORMAT_FAIL;
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- if (tmp & MS_INT_CED) {
- ms_card->format_status = FORMAT_SUCCESS;
- ms_card->pro_under_formatting = 0;
- } else if (tmp & MS_INT_BREQ) {
- ms_card->format_status = FORMAT_IN_PROGRESS;
- } else {
- ms_card->format_status = FORMAT_FAIL;
- ms_card->pro_under_formatting = 0;
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- return STATUS_SUCCESS;
-}
-
-void mspro_polling_format_status(struct rtsx_chip *chip)
-{
- struct ms_info *ms_card = &(chip->ms_card);
- int i;
-
- if (ms_card->pro_under_formatting && (rtsx_get_stat(chip) != RTSX_STAT_SS)) {
- rtsx_set_stat(chip, RTSX_STAT_RUN);
-
- for (i = 0; i < 65535; i++) {
- mspro_read_format_progress(chip, MS_SHORT_DATA_LEN);
- if (ms_card->format_status != FORMAT_IN_PROGRESS)
- break;
- }
- }
-
- return;
-}
-
-int mspro_format(struct scsi_cmnd *srb, struct rtsx_chip *chip, int short_data_len, int quick_format)
-{
- struct ms_info *ms_card = &(chip->ms_card);
- int retval, i;
- u8 buf[8], tmp;
- u16 para;
-
- RTSX_DEBUGP("--%s--\n", __func__);
-
- retval = ms_switch_clock(chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- retval = ms_set_rw_reg_addr(chip, 0x00, 0x00, Pro_TPCParm, 0x01);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- memset(buf, 0, 2);
- switch (short_data_len) {
- case 32:
- buf[0] = 0;
- break;
- case 64:
- buf[0] = 1;
- break;
- case 128:
- buf[0] = 2;
- break;
- case 256:
- default:
- buf[0] = 3;
- break;
- }
-
- for (i = 0; i < MS_MAX_RETRY_COUNT; i++) {
- retval = ms_write_bytes(chip, PRO_WRITE_REG, 1, NO_WAIT_INT, buf, 2);
- if (retval == STATUS_SUCCESS)
- break;
- }
- if (i == MS_MAX_RETRY_COUNT)
- TRACE_RET(chip, STATUS_FAIL);
-
- if (quick_format)
- para = 0x0000;
- else
- para = 0x0001;
-
- retval = mspro_set_rw_cmd(chip, 0, para, PRO_FORMAT);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- RTSX_READ_REG(chip, MS_TRANS_CFG, &tmp);
-
- if (tmp & (MS_INT_CMDNK | MS_INT_ERR))
- TRACE_RET(chip, STATUS_FAIL);
-
- if ((tmp & (MS_INT_BREQ | MS_INT_CED)) == MS_INT_BREQ) {
- ms_card->pro_under_formatting = 1;
- ms_card->progress = 0;
- ms_card->format_status = FORMAT_IN_PROGRESS;
- return STATUS_SUCCESS;
- }
-
- if (tmp & MS_INT_CED) {
- ms_card->pro_under_formatting = 0;
- ms_card->progress = 0;
- ms_card->format_status = FORMAT_SUCCESS;
- set_sense_type(chip, SCSI_LUN(srb), SENSE_TYPE_NO_SENSE);
- return STATUS_SUCCESS;
- }
-
- TRACE_RET(chip, STATUS_FAIL);
-}
-
-
-static int ms_read_multiple_pages(struct rtsx_chip *chip, u16 phy_blk, u16 log_blk,
- u8 start_page, u8 end_page, u8 *buf, unsigned int *index, unsigned int *offset)
-{
- struct ms_info *ms_card = &(chip->ms_card);
- int retval, i;
- u8 extra[MS_EXTRA_SIZE], page_addr, val, trans_cfg, data[6];
- u8 *ptr;
-
- retval = ms_read_extra_data(chip, phy_blk, start_page, extra, MS_EXTRA_SIZE);
- if (retval == STATUS_SUCCESS) {
- if ((extra[1] & 0x30) != 0x30) {
- ms_set_err_code(chip, MS_FLASH_READ_ERROR);
- TRACE_RET(chip, STATUS_FAIL);
- }
- }
-
- retval = ms_set_rw_reg_addr(chip, OverwriteFlag, MS_EXTRA_SIZE, SystemParm, 6);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- if (CHK_MS4BIT(ms_card))
- data[0] = 0x88;
- else
- data[0] = 0x80;
-
- data[1] = 0;
- data[2] = (u8)(phy_blk >> 8);
- data[3] = (u8)phy_blk;
- data[4] = 0;
- data[5] = start_page;
-
- for (i = 0; i < MS_MAX_RETRY_COUNT; i++) {
- retval = ms_write_bytes(chip, WRITE_REG, 6, NO_WAIT_INT, data, 6);
- if (retval == STATUS_SUCCESS)
- break;
- }
- if (i == MS_MAX_RETRY_COUNT)
- TRACE_RET(chip, STATUS_FAIL);
-
- ms_set_err_code(chip, MS_NO_ERROR);
-
- retval = ms_send_cmd(chip, BLOCK_READ, WAIT_INT);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- ptr = buf;
-
- for (page_addr = start_page; page_addr < end_page; page_addr++) {
- ms_set_err_code(chip, MS_NO_ERROR);
-
- if (detect_card_cd(chip, MS_CARD) != STATUS_SUCCESS) {
- ms_set_err_code(chip, MS_NO_CARD);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- retval = ms_read_bytes(chip, GET_INT, 1, NO_WAIT_INT, &val, 1);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- if (val & INT_REG_CMDNK) {
- ms_set_err_code(chip, MS_CMD_NK);
- TRACE_RET(chip, STATUS_FAIL);
- }
- if (val & INT_REG_ERR) {
- if (val & INT_REG_BREQ) {
- retval = ms_read_status_reg(chip);
- if (retval != STATUS_SUCCESS) {
- if (!(chip->card_wp & MS_CARD)) {
- reset_ms(chip);
- ms_set_page_status(log_blk, setPS_NG, extra, MS_EXTRA_SIZE);
- ms_write_extra_data(chip, phy_blk,
- page_addr, extra, MS_EXTRA_SIZE);
- }
- ms_set_err_code(chip, MS_FLASH_READ_ERROR);
- TRACE_RET(chip, STATUS_FAIL);
- }
- } else {
- ms_set_err_code(chip, MS_FLASH_READ_ERROR);
- TRACE_RET(chip, STATUS_FAIL);
- }
- } else {
- if (!(val & INT_REG_BREQ)) {
- ms_set_err_code(chip, MS_BREQ_ERROR);
- TRACE_RET(chip, STATUS_FAIL);
- }
- }
-
- if (page_addr == (end_page - 1)) {
- if (!(val & INT_REG_CED)) {
- retval = ms_send_cmd(chip, BLOCK_END, WAIT_INT);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- retval = ms_read_bytes(chip, GET_INT, 1, NO_WAIT_INT, &val, 1);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- if (!(val & INT_REG_CED)) {
- ms_set_err_code(chip, MS_FLASH_READ_ERROR);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- trans_cfg = NO_WAIT_INT;
- } else {
- trans_cfg = WAIT_INT;
- }
-
- rtsx_init_cmd(chip);
-
- rtsx_add_cmd(chip, WRITE_REG_CMD, MS_TPC, 0xFF, READ_PAGE_DATA);
- rtsx_add_cmd(chip, WRITE_REG_CMD, MS_TRANS_CFG, 0xFF, trans_cfg);
- rtsx_add_cmd(chip, WRITE_REG_CMD, CARD_DATA_SOURCE, 0x01, RING_BUFFER);
-
- trans_dma_enable(DMA_FROM_DEVICE, chip, 512, DMA_512);
-
- rtsx_add_cmd(chip, WRITE_REG_CMD, MS_TRANSFER, 0xFF,
- MS_TRANSFER_START | MS_TM_NORMAL_READ);
- rtsx_add_cmd(chip, CHECK_REG_CMD, MS_TRANSFER, MS_TRANSFER_END, MS_TRANSFER_END);
-
- rtsx_send_cmd_no_wait(chip);
-
- retval = rtsx_transfer_data_partial(chip, MS_CARD, ptr, 512, scsi_sg_count(chip->srb),
- index, offset, DMA_FROM_DEVICE, chip->ms_timeout);
- if (retval < 0) {
- if (retval == -ETIMEDOUT) {
- ms_set_err_code(chip, MS_TO_ERROR);
- rtsx_clear_ms_error(chip);
- TRACE_RET(chip, STATUS_TIMEDOUT);
- }
-
- retval = rtsx_read_register(chip, MS_TRANS_CFG, &val);
- if (retval != STATUS_SUCCESS) {
- ms_set_err_code(chip, MS_TO_ERROR);
- rtsx_clear_ms_error(chip);
- TRACE_RET(chip, STATUS_TIMEDOUT);
- }
- if (val & (MS_CRC16_ERR | MS_RDY_TIMEOUT)) {
- ms_set_err_code(chip, MS_CRC16_ERROR);
- rtsx_clear_ms_error(chip);
- TRACE_RET(chip, STATUS_FAIL);
- }
- }
-
- if (scsi_sg_count(chip->srb) == 0)
- ptr += 512;
- }
-
- return STATUS_SUCCESS;
-}
-
-static int ms_write_multiple_pages(struct rtsx_chip *chip, u16 old_blk, u16 new_blk,
- u16 log_blk, u8 start_page, u8 end_page, u8 *buf,
- unsigned int *index, unsigned int *offset)
-{
- struct ms_info *ms_card = &(chip->ms_card);
- int retval, i;
- u8 page_addr, val, data[16];
- u8 *ptr;
-
- if (!start_page) {
- retval = ms_set_rw_reg_addr(chip, OverwriteFlag, MS_EXTRA_SIZE, SystemParm, 7);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- if (CHK_MS4BIT(ms_card))
- data[0] = 0x88;
- else
- data[0] = 0x80;
-
- data[1] = 0;
- data[2] = (u8)(old_blk >> 8);
- data[3] = (u8)old_blk;
- data[4] = 0x80;
- data[5] = 0;
- data[6] = 0xEF;
- data[7] = 0xFF;
-
- retval = ms_write_bytes(chip, WRITE_REG, 7, NO_WAIT_INT, data, 8);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- retval = ms_send_cmd(chip, BLOCK_WRITE, WAIT_INT);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- ms_set_err_code(chip, MS_NO_ERROR);
- retval = ms_transfer_tpc(chip, MS_TM_READ_BYTES, GET_INT, 1, NO_WAIT_INT);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- retval = ms_set_rw_reg_addr(chip, OverwriteFlag, MS_EXTRA_SIZE, SystemParm, (6 + MS_EXTRA_SIZE));
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- ms_set_err_code(chip, MS_NO_ERROR);
-
- if (CHK_MS4BIT(ms_card))
- data[0] = 0x88;
- else
- data[0] = 0x80;
-
- data[1] = 0;
- data[2] = (u8)(new_blk >> 8);
- data[3] = (u8)new_blk;
- if ((end_page - start_page) == 1)
- data[4] = 0x20;
- else
- data[4] = 0;
-
- data[5] = start_page;
- data[6] = 0xF8;
- data[7] = 0xFF;
- data[8] = (u8)(log_blk >> 8);
- data[9] = (u8)log_blk;
-
- for (i = 0x0A; i < 0x10; i++)
- data[i] = 0xFF;
-
- for (i = 0; i < MS_MAX_RETRY_COUNT; i++) {
- retval = ms_write_bytes(chip, WRITE_REG, 6 + MS_EXTRA_SIZE, NO_WAIT_INT, data, 16);
- if (retval == STATUS_SUCCESS)
- break;
- }
- if (i == MS_MAX_RETRY_COUNT)
- TRACE_RET(chip, STATUS_FAIL);
-
- for (i = 0; i < MS_MAX_RETRY_COUNT; i++) {
- retval = ms_send_cmd(chip, BLOCK_WRITE, WAIT_INT);
- if (retval == STATUS_SUCCESS)
- break;
- }
- if (i == MS_MAX_RETRY_COUNT)
- TRACE_RET(chip, STATUS_FAIL);
-
- retval = ms_read_bytes(chip, GET_INT, 1, NO_WAIT_INT, &val, 1);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- ptr = buf;
- for (page_addr = start_page; page_addr < end_page; page_addr++) {
- ms_set_err_code(chip, MS_NO_ERROR);
-
- if (detect_card_cd(chip, MS_CARD) != STATUS_SUCCESS) {
- ms_set_err_code(chip, MS_NO_CARD);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- if (val & INT_REG_CMDNK) {
- ms_set_err_code(chip, MS_CMD_NK);
- TRACE_RET(chip, STATUS_FAIL);
- }
- if (val & INT_REG_ERR) {
- ms_set_err_code(chip, MS_FLASH_WRITE_ERROR);
- TRACE_RET(chip, STATUS_FAIL);
- }
- if (!(val & INT_REG_BREQ)) {
- ms_set_err_code(chip, MS_BREQ_ERROR);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- udelay(30);
-
- rtsx_init_cmd(chip);
-
- rtsx_add_cmd(chip, WRITE_REG_CMD, MS_TPC, 0xFF, WRITE_PAGE_DATA);
- rtsx_add_cmd(chip, WRITE_REG_CMD, MS_TRANS_CFG, 0xFF, WAIT_INT);
- rtsx_add_cmd(chip, WRITE_REG_CMD, CARD_DATA_SOURCE, 0x01, RING_BUFFER);
-
- trans_dma_enable(DMA_TO_DEVICE, chip, 512, DMA_512);
-
- rtsx_add_cmd(chip, WRITE_REG_CMD, MS_TRANSFER, 0xFF,
- MS_TRANSFER_START | MS_TM_NORMAL_WRITE);
- rtsx_add_cmd(chip, CHECK_REG_CMD, MS_TRANSFER, MS_TRANSFER_END, MS_TRANSFER_END);
-
- rtsx_send_cmd_no_wait(chip);
-
- retval = rtsx_transfer_data_partial(chip, MS_CARD, ptr, 512, scsi_sg_count(chip->srb),
- index, offset, DMA_TO_DEVICE, chip->ms_timeout);
- if (retval < 0) {
- ms_set_err_code(chip, MS_TO_ERROR);
- rtsx_clear_ms_error(chip);
-
- if (retval == -ETIMEDOUT)
- TRACE_RET(chip, STATUS_TIMEDOUT);
- else
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- retval = ms_read_bytes(chip, GET_INT, 1, NO_WAIT_INT, &val, 1);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- if ((end_page - start_page) == 1) {
- if (!(val & INT_REG_CED)) {
- ms_set_err_code(chip, MS_FLASH_WRITE_ERROR);
- TRACE_RET(chip, STATUS_FAIL);
- }
- } else {
- if (page_addr == (end_page - 1)) {
- if (!(val & INT_REG_CED)) {
- retval = ms_send_cmd(chip, BLOCK_END, WAIT_INT);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- retval = ms_read_bytes(chip, GET_INT, 1, NO_WAIT_INT, &val, 1);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- if ((page_addr == (end_page - 1)) || (page_addr == ms_card->page_off)) {
- if (!(val & INT_REG_CED)) {
- ms_set_err_code(chip, MS_FLASH_WRITE_ERROR);
- TRACE_RET(chip, STATUS_FAIL);
- }
- }
- }
-
- if (scsi_sg_count(chip->srb) == 0)
- ptr += 512;
- }
-
- return STATUS_SUCCESS;
-}
-
-
-static int ms_finish_write(struct rtsx_chip *chip, u16 old_blk, u16 new_blk,
- u16 log_blk, u8 page_off)
-{
- struct ms_info *ms_card = &(chip->ms_card);
- int retval, seg_no;
-
- retval = ms_copy_page(chip, old_blk, new_blk, log_blk,
- page_off, ms_card->page_off + 1);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- seg_no = old_blk >> 9;
-
- if (MS_TST_BAD_BLOCK_FLG(ms_card)) {
- MS_CLR_BAD_BLOCK_FLG(ms_card);
- ms_set_bad_block(chip, old_blk);
- } else {
- retval = ms_erase_block(chip, old_blk);
- if (retval == STATUS_SUCCESS)
- ms_set_unused_block(chip, old_blk);
- }
-
- ms_set_l2p_tbl(chip, seg_no, log_blk - ms_start_idx[seg_no], new_blk);
-
- return STATUS_SUCCESS;
-}
-
-static int ms_prepare_write(struct rtsx_chip *chip, u16 old_blk, u16 new_blk,
- u16 log_blk, u8 start_page)
-{
- int retval;
-
- if (start_page) {
- retval = ms_copy_page(chip, old_blk, new_blk, log_blk, 0, start_page);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- return STATUS_SUCCESS;
-}
-
-#ifdef MS_DELAY_WRITE
-int ms_delay_write(struct rtsx_chip *chip)
-{
- struct ms_info *ms_card = &(chip->ms_card);
- struct ms_delay_write_tag *delay_write = &(ms_card->delay_write);
- int retval;
-
- if (delay_write->delay_write_flag) {
- retval = ms_set_init_para(chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- delay_write->delay_write_flag = 0;
- retval = ms_finish_write(chip,
- delay_write->old_phyblock, delay_write->new_phyblock,
- delay_write->logblock, delay_write->pageoff);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- return STATUS_SUCCESS;
-}
-#endif
-
-static inline void ms_rw_fail(struct scsi_cmnd *srb, struct rtsx_chip *chip)
-{
- if (srb->sc_data_direction == DMA_FROM_DEVICE)
- set_sense_type(chip, SCSI_LUN(srb), SENSE_TYPE_MEDIA_UNRECOVER_READ_ERR);
- else
- set_sense_type(chip, SCSI_LUN(srb), SENSE_TYPE_MEDIA_WRITE_ERR);
-}
-
-static int ms_rw_multi_sector(struct scsi_cmnd *srb, struct rtsx_chip *chip, u32 start_sector, u16 sector_cnt)
-{
- struct ms_info *ms_card = &(chip->ms_card);
- unsigned int lun = SCSI_LUN(srb);
- int retval, seg_no;
- unsigned int index = 0, offset = 0;
- u16 old_blk = 0, new_blk = 0, log_blk, total_sec_cnt = sector_cnt;
- u8 start_page, end_page = 0, page_cnt;
- u8 *ptr;
-#ifdef MS_DELAY_WRITE
- struct ms_delay_write_tag *delay_write = &(ms_card->delay_write);
-#endif
-
- ms_set_err_code(chip, MS_NO_ERROR);
-
- ms_card->cleanup_counter = 0;
-
- ptr = (u8 *)scsi_sglist(srb);
-
- retval = ms_switch_clock(chip);
- if (retval != STATUS_SUCCESS) {
- ms_rw_fail(srb, chip);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- log_blk = (u16)(start_sector >> ms_card->block_shift);
- start_page = (u8)(start_sector & ms_card->page_off);
-
- for (seg_no = 0; seg_no < ARRAY_SIZE(ms_start_idx) - 1; seg_no++) {
- if (log_blk < ms_start_idx[seg_no+1])
- break;
- }
-
- if (ms_card->segment[seg_no].build_flag == 0) {
- retval = ms_build_l2p_tbl(chip, seg_no);
- if (retval != STATUS_SUCCESS) {
- chip->card_fail |= MS_CARD;
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_NOT_PRESENT);
- TRACE_RET(chip, STATUS_FAIL);
- }
- }
-
- if (srb->sc_data_direction == DMA_TO_DEVICE) {
-#ifdef MS_DELAY_WRITE
- if (delay_write->delay_write_flag &&
- (delay_write->logblock == log_blk) &&
- (start_page > delay_write->pageoff)) {
- delay_write->delay_write_flag = 0;
- retval = ms_copy_page(chip,
- delay_write->old_phyblock,
- delay_write->new_phyblock, log_blk,
- delay_write->pageoff, start_page);
- if (retval != STATUS_SUCCESS) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_WRITE_ERR);
- TRACE_RET(chip, STATUS_FAIL);
- }
- old_blk = delay_write->old_phyblock;
- new_blk = delay_write->new_phyblock;
- } else if (delay_write->delay_write_flag &&
- (delay_write->logblock == log_blk) &&
- (start_page == delay_write->pageoff)) {
- delay_write->delay_write_flag = 0;
- old_blk = delay_write->old_phyblock;
- new_blk = delay_write->new_phyblock;
- } else {
- retval = ms_delay_write(chip);
- if (retval != STATUS_SUCCESS) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_WRITE_ERR);
- TRACE_RET(chip, STATUS_FAIL);
- }
-#endif
- old_blk = ms_get_l2p_tbl(chip, seg_no, log_blk - ms_start_idx[seg_no]);
- new_blk = ms_get_unused_block(chip, seg_no);
- if ((old_blk == 0xFFFF) || (new_blk == 0xFFFF)) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_WRITE_ERR);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- retval = ms_prepare_write(chip, old_blk, new_blk, log_blk, start_page);
- if (retval != STATUS_SUCCESS) {
- if (detect_card_cd(chip, MS_CARD) != STATUS_SUCCESS) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_NOT_PRESENT);
- TRACE_RET(chip, STATUS_FAIL);
- }
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_WRITE_ERR);
- TRACE_RET(chip, STATUS_FAIL);
- }
-#ifdef MS_DELAY_WRITE
- }
-#endif
- } else {
-#ifdef MS_DELAY_WRITE
- retval = ms_delay_write(chip);
- if (retval != STATUS_SUCCESS) {
- if (detect_card_cd(chip, MS_CARD) != STATUS_SUCCESS) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_NOT_PRESENT);
- TRACE_RET(chip, STATUS_FAIL);
- }
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_UNRECOVER_READ_ERR);
- TRACE_RET(chip, STATUS_FAIL);
- }
-#endif
- old_blk = ms_get_l2p_tbl(chip, seg_no, log_blk - ms_start_idx[seg_no]);
- if (old_blk == 0xFFFF) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_UNRECOVER_READ_ERR);
- TRACE_RET(chip, STATUS_FAIL);
- }
- }
-
- RTSX_DEBUGP("seg_no = %d, old_blk = 0x%x, new_blk = 0x%x\n", seg_no, old_blk, new_blk);
-
- while (total_sec_cnt) {
- if ((start_page + total_sec_cnt) > (ms_card->page_off + 1))
- end_page = ms_card->page_off + 1;
- else
- end_page = start_page + (u8)total_sec_cnt;
-
- page_cnt = end_page - start_page;
-
- RTSX_DEBUGP("start_page = %d, end_page = %d, page_cnt = %d\n",
- start_page, end_page, page_cnt);
-
- if (srb->sc_data_direction == DMA_FROM_DEVICE) {
- retval = ms_read_multiple_pages(chip,
- old_blk, log_blk, start_page, end_page,
- ptr, &index, &offset);
- } else {
- retval = ms_write_multiple_pages(chip, old_blk,
- new_blk, log_blk, start_page, end_page,
- ptr, &index, &offset);
- }
-
- if (retval != STATUS_SUCCESS) {
- toggle_gpio(chip, 1);
- if (detect_card_cd(chip, MS_CARD) != STATUS_SUCCESS) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_NOT_PRESENT);
- TRACE_RET(chip, STATUS_FAIL);
- }
- ms_rw_fail(srb, chip);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- if (srb->sc_data_direction == DMA_TO_DEVICE) {
- if (end_page == (ms_card->page_off + 1)) {
- retval = ms_erase_block(chip, old_blk);
- if (retval == STATUS_SUCCESS)
- ms_set_unused_block(chip, old_blk);
-
- ms_set_l2p_tbl(chip, seg_no, log_blk - ms_start_idx[seg_no], new_blk);
- }
- }
-
- total_sec_cnt -= page_cnt;
- if (scsi_sg_count(srb) == 0)
- ptr += page_cnt * 512;
-
- if (total_sec_cnt == 0)
- break;
-
- log_blk++;
-
- for (seg_no = 0; seg_no < ARRAY_SIZE(ms_start_idx) - 1;
- seg_no++) {
- if (log_blk < ms_start_idx[seg_no+1])
- break;
- }
-
- if (ms_card->segment[seg_no].build_flag == 0) {
- retval = ms_build_l2p_tbl(chip, seg_no);
- if (retval != STATUS_SUCCESS) {
- chip->card_fail |= MS_CARD;
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_NOT_PRESENT);
- TRACE_RET(chip, STATUS_FAIL);
- }
- }
-
- old_blk = ms_get_l2p_tbl(chip, seg_no, log_blk - ms_start_idx[seg_no]);
- if (old_blk == 0xFFFF) {
- ms_rw_fail(srb, chip);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- if (srb->sc_data_direction == DMA_TO_DEVICE) {
- new_blk = ms_get_unused_block(chip, seg_no);
- if (new_blk == 0xFFFF) {
- ms_rw_fail(srb, chip);
- TRACE_RET(chip, STATUS_FAIL);
- }
- }
-
- RTSX_DEBUGP("seg_no = %d, old_blk = 0x%x, new_blk = 0x%x\n", seg_no, old_blk, new_blk);
-
- start_page = 0;
- }
-
- if (srb->sc_data_direction == DMA_TO_DEVICE) {
- if (end_page < (ms_card->page_off + 1)) {
-#ifdef MS_DELAY_WRITE
- delay_write->delay_write_flag = 1;
- delay_write->old_phyblock = old_blk;
- delay_write->new_phyblock = new_blk;
- delay_write->logblock = log_blk;
- delay_write->pageoff = end_page;
-#else
- retval = ms_finish_write(chip, old_blk, new_blk, log_blk, end_page);
- if (retval != STATUS_SUCCESS) {
- if (detect_card_cd(chip, MS_CARD) != STATUS_SUCCESS) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_NOT_PRESENT);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- ms_rw_fail(srb, chip);
- TRACE_RET(chip, STATUS_FAIL);
- }
-#endif
- }
- }
-
- scsi_set_resid(srb, 0);
-
- return STATUS_SUCCESS;
-}
-
-int ms_rw(struct scsi_cmnd *srb, struct rtsx_chip *chip, u32 start_sector, u16 sector_cnt)
-{
- struct ms_info *ms_card = &(chip->ms_card);
- int retval;
-
- if (CHK_MSPRO(ms_card))
- retval = mspro_rw_multi_sector(srb, chip, start_sector, sector_cnt);
- else
- retval = ms_rw_multi_sector(srb, chip, start_sector, sector_cnt);
-
- return retval;
-}
-
-
-void ms_free_l2p_tbl(struct rtsx_chip *chip)
-{
- struct ms_info *ms_card = &(chip->ms_card);
- int i = 0;
-
- if (ms_card->segment != NULL) {
- for (i = 0; i < ms_card->segment_cnt; i++) {
- if (ms_card->segment[i].l2p_table != NULL) {
- vfree(ms_card->segment[i].l2p_table);
- ms_card->segment[i].l2p_table = NULL;
- }
- if (ms_card->segment[i].free_table != NULL) {
- vfree(ms_card->segment[i].free_table);
- ms_card->segment[i].free_table = NULL;
- }
- }
- vfree(ms_card->segment);
- ms_card->segment = NULL;
- }
-}
-
-#ifdef SUPPORT_MAGIC_GATE
-
-#ifdef READ_BYTES_WAIT_INT
-static int ms_poll_int(struct rtsx_chip *chip)
-{
- int retval;
- u8 val;
-
- rtsx_init_cmd(chip);
-
- rtsx_add_cmd(chip, CHECK_REG_CMD, MS_TRANS_CFG, MS_INT_CED, MS_INT_CED);
-
- retval = rtsx_send_cmd(chip, MS_CARD, 5000);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- val = *rtsx_get_cmd_data(chip);
- if (val & MS_INT_ERR)
- TRACE_RET(chip, STATUS_FAIL);
-
- return STATUS_SUCCESS;
-}
-#endif
-
-#ifdef MS_SAMPLE_INT_ERR
-static int check_ms_err(struct rtsx_chip *chip)
-{
- int retval;
- u8 val;
-
- retval = rtsx_read_register(chip, MS_TRANSFER, &val);
- if (retval != STATUS_SUCCESS)
- return 1;
- if (val & MS_TRANSFER_ERR)
- return 1;
-
- retval = rtsx_read_register(chip, MS_TRANS_CFG, &val);
- if (retval != STATUS_SUCCESS)
- return 1;
-
- if (val & (MS_INT_ERR | MS_INT_CMDNK))
- return 1;
-
- return 0;
-}
-#else
-static int check_ms_err(struct rtsx_chip *chip)
-{
- int retval;
- u8 val;
-
- retval = rtsx_read_register(chip, MS_TRANSFER, &val);
- if (retval != STATUS_SUCCESS)
- return 1;
- if (val & MS_TRANSFER_ERR)
- return 1;
-
- return 0;
-}
-#endif
-
-static int mg_send_ex_cmd(struct rtsx_chip *chip, u8 cmd, u8 entry_num)
-{
- int retval, i;
- u8 data[8];
-
- data[0] = cmd;
- data[1] = 0;
- data[2] = 0;
- data[3] = 0;
- data[4] = 0;
- data[5] = 0;
- data[6] = entry_num;
- data[7] = 0;
-
- for (i = 0; i < MS_MAX_RETRY_COUNT; i++) {
- retval = ms_write_bytes(chip, PRO_EX_SET_CMD, 7, WAIT_INT, data, 8);
- if (retval == STATUS_SUCCESS)
- break;
- }
- if (i == MS_MAX_RETRY_COUNT)
- TRACE_RET(chip, STATUS_FAIL);
-
- if (check_ms_err(chip)) {
- rtsx_clear_ms_error(chip);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- return STATUS_SUCCESS;
-}
-
-static int mg_set_tpc_para_sub(struct rtsx_chip *chip, int type, u8 mg_entry_num)
-{
- int retval;
- u8 buf[6];
-
- RTSX_DEBUGP("--%s--\n", __func__);
-
- if (type == 0)
- retval = ms_set_rw_reg_addr(chip, 0, 0, Pro_TPCParm, 1);
- else
- retval = ms_set_rw_reg_addr(chip, 0, 0, Pro_DataCount1, 6);
-
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- buf[0] = 0;
- buf[1] = 0;
- if (type == 1) {
- buf[2] = 0;
- buf[3] = 0;
- buf[4] = 0;
- buf[5] = mg_entry_num;
- }
- retval = ms_write_bytes(chip, PRO_WRITE_REG, (type == 0) ? 1 : 6, NO_WAIT_INT, buf, 6);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- return STATUS_SUCCESS;
-}
-
-int mg_set_leaf_id(struct scsi_cmnd *srb, struct rtsx_chip *chip)
-{
- int retval;
- int i;
- unsigned int lun = SCSI_LUN(srb);
- u8 buf1[32], buf2[12];
-
- RTSX_DEBUGP("--%s--\n", __func__);
-
- if (scsi_bufflen(srb) < 12) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- ms_cleanup_work(chip);
-
- retval = ms_switch_clock(chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- retval = mg_send_ex_cmd(chip, MG_SET_LID, 0);
- if (retval != STATUS_SUCCESS) {
- set_sense_type(chip, lun, SENSE_TYPE_MG_KEY_FAIL_NOT_ESTAB);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- memset(buf1, 0, 32);
- rtsx_stor_get_xfer_buf(buf2, min(12, (int)scsi_bufflen(srb)), srb);
- for (i = 0; i < 8; i++)
- buf1[8+i] = buf2[4+i];
-
- retval = ms_write_bytes(chip, PRO_WRITE_SHORT_DATA, 32, WAIT_INT, buf1, 32);
- if (retval != STATUS_SUCCESS) {
- set_sense_type(chip, lun, SENSE_TYPE_MG_KEY_FAIL_NOT_ESTAB);
- TRACE_RET(chip, STATUS_FAIL);
- }
- if (check_ms_err(chip)) {
- set_sense_type(chip, lun, SENSE_TYPE_MG_KEY_FAIL_NOT_ESTAB);
- rtsx_clear_ms_error(chip);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- return STATUS_SUCCESS;
-}
-
-int mg_get_local_EKB(struct scsi_cmnd *srb, struct rtsx_chip *chip)
-{
- int retval = STATUS_FAIL;
- int bufflen;
- unsigned int lun = SCSI_LUN(srb);
- u8 *buf = NULL;
-
- RTSX_DEBUGP("--%s--\n", __func__);
-
- ms_cleanup_work(chip);
-
- retval = ms_switch_clock(chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- buf = kmalloc(1540, GFP_KERNEL);
- if (!buf)
- TRACE_RET(chip, STATUS_ERROR);
-
- buf[0] = 0x04;
- buf[1] = 0x1A;
- buf[2] = 0x00;
- buf[3] = 0x00;
-
- retval = mg_send_ex_cmd(chip, MG_GET_LEKB, 0);
- if (retval != STATUS_SUCCESS) {
- set_sense_type(chip, lun, SENSE_TYPE_MG_KEY_FAIL_NOT_AUTHEN);
- TRACE_GOTO(chip, GetEKBFinish);
- }
-
- retval = ms_transfer_data(chip, MS_TM_AUTO_READ, PRO_READ_LONG_DATA,
- 3, WAIT_INT, 0, 0, buf + 4, 1536);
- if (retval != STATUS_SUCCESS) {
- set_sense_type(chip, lun, SENSE_TYPE_MG_KEY_FAIL_NOT_AUTHEN);
- rtsx_clear_ms_error(chip);
- TRACE_GOTO(chip, GetEKBFinish);
- }
- if (check_ms_err(chip)) {
- set_sense_type(chip, lun, SENSE_TYPE_MG_KEY_FAIL_NOT_AUTHEN);
- rtsx_clear_ms_error(chip);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- bufflen = min(1052, (int)scsi_bufflen(srb));
- rtsx_stor_set_xfer_buf(buf, bufflen, srb);
-
-GetEKBFinish:
- kfree(buf);
- return retval;
-}
-
-int mg_chg(struct scsi_cmnd *srb, struct rtsx_chip *chip)
-{
- struct ms_info *ms_card = &(chip->ms_card);
- int retval;
- int bufflen;
- int i;
- unsigned int lun = SCSI_LUN(srb);
- u8 buf[32];
-
- RTSX_DEBUGP("--%s--\n", __func__);
-
- ms_cleanup_work(chip);
-
- retval = ms_switch_clock(chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- retval = mg_send_ex_cmd(chip, MG_GET_ID, 0);
- if (retval != STATUS_SUCCESS) {
- set_sense_type(chip, lun, SENSE_TYPE_MG_INCOMPATIBLE_MEDIUM);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- retval = ms_read_bytes(chip, PRO_READ_SHORT_DATA, 32, WAIT_INT, buf, 32);
- if (retval != STATUS_SUCCESS) {
- set_sense_type(chip, lun, SENSE_TYPE_MG_INCOMPATIBLE_MEDIUM);
- TRACE_RET(chip, STATUS_FAIL);
- }
- if (check_ms_err(chip)) {
- set_sense_type(chip, lun, SENSE_TYPE_MG_INCOMPATIBLE_MEDIUM);
- rtsx_clear_ms_error(chip);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- memcpy(ms_card->magic_gate_id, buf, 16);
-
-#ifdef READ_BYTES_WAIT_INT
- retval = ms_poll_int(chip);
- if (retval != STATUS_SUCCESS) {
- set_sense_type(chip, lun, SENSE_TYPE_MG_INCOMPATIBLE_MEDIUM);
- TRACE_RET(chip, STATUS_FAIL);
- }
-#endif
-
- retval = mg_send_ex_cmd(chip, MG_SET_RD, 0);
- if (retval != STATUS_SUCCESS) {
- set_sense_type(chip, lun, SENSE_TYPE_MG_INCOMPATIBLE_MEDIUM);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- bufflen = min(12, (int)scsi_bufflen(srb));
- rtsx_stor_get_xfer_buf(buf, bufflen, srb);
-
- for (i = 0; i < 8; i++)
- buf[i] = buf[4+i];
-
- for (i = 0; i < 24; i++)
- buf[8+i] = 0;
-
- retval = ms_write_bytes(chip, PRO_WRITE_SHORT_DATA,
- 32, WAIT_INT, buf, 32);
- if (retval != STATUS_SUCCESS) {
- set_sense_type(chip, lun, SENSE_TYPE_MG_INCOMPATIBLE_MEDIUM);
- TRACE_RET(chip, STATUS_FAIL);
- }
- if (check_ms_err(chip)) {
- set_sense_type(chip, lun, SENSE_TYPE_MG_INCOMPATIBLE_MEDIUM);
- rtsx_clear_ms_error(chip);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- ms_card->mg_auth = 0;
-
- return STATUS_SUCCESS;
-}
-
-int mg_get_rsp_chg(struct scsi_cmnd *srb, struct rtsx_chip *chip)
-{
- struct ms_info *ms_card = &(chip->ms_card);
- int retval;
- int bufflen;
- unsigned int lun = SCSI_LUN(srb);
- u8 buf1[32], buf2[36];
-
- RTSX_DEBUGP("--%s--\n", __func__);
-
- ms_cleanup_work(chip);
-
- retval = ms_switch_clock(chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- retval = mg_send_ex_cmd(chip, MG_MAKE_RMS, 0);
- if (retval != STATUS_SUCCESS) {
- set_sense_type(chip, lun, SENSE_TYPE_MG_KEY_FAIL_NOT_AUTHEN);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- retval = ms_read_bytes(chip, PRO_READ_SHORT_DATA, 32, WAIT_INT, buf1, 32);
- if (retval != STATUS_SUCCESS) {
- set_sense_type(chip, lun, SENSE_TYPE_MG_KEY_FAIL_NOT_AUTHEN);
- TRACE_RET(chip, STATUS_FAIL);
- }
- if (check_ms_err(chip)) {
- set_sense_type(chip, lun, SENSE_TYPE_MG_KEY_FAIL_NOT_AUTHEN);
- rtsx_clear_ms_error(chip);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- buf2[0] = 0x00;
- buf2[1] = 0x22;
- buf2[2] = 0x00;
- buf2[3] = 0x00;
-
- memcpy(buf2 + 4, ms_card->magic_gate_id, 16);
- memcpy(buf2 + 20, buf1, 16);
-
- bufflen = min(36, (int)scsi_bufflen(srb));
- rtsx_stor_set_xfer_buf(buf2, bufflen, srb);
-
-#ifdef READ_BYTES_WAIT_INT
- retval = ms_poll_int(chip);
- if (retval != STATUS_SUCCESS) {
- set_sense_type(chip, lun, SENSE_TYPE_MG_KEY_FAIL_NOT_AUTHEN);
- TRACE_RET(chip, STATUS_FAIL);
- }
-#endif
-
- return STATUS_SUCCESS;
-}
-
-int mg_rsp(struct scsi_cmnd *srb, struct rtsx_chip *chip)
-{
- struct ms_info *ms_card = &(chip->ms_card);
- int retval;
- int i;
- int bufflen;
- unsigned int lun = SCSI_LUN(srb);
- u8 buf[32];
-
- RTSX_DEBUGP("--%s--\n", __func__);
-
- ms_cleanup_work(chip);
-
- retval = ms_switch_clock(chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- retval = mg_send_ex_cmd(chip, MG_MAKE_KSE, 0);
- if (retval != STATUS_SUCCESS) {
- set_sense_type(chip, lun, SENSE_TYPE_MG_KEY_FAIL_NOT_AUTHEN);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- bufflen = min(12, (int)scsi_bufflen(srb));
- rtsx_stor_get_xfer_buf(buf, bufflen, srb);
-
- for (i = 0; i < 8; i++)
- buf[i] = buf[4+i];
-
- for (i = 0; i < 24; i++)
- buf[8+i] = 0;
-
- retval = ms_write_bytes(chip, PRO_WRITE_SHORT_DATA, 32, WAIT_INT, buf, 32);
- if (retval != STATUS_SUCCESS) {
- set_sense_type(chip, lun, SENSE_TYPE_MG_KEY_FAIL_NOT_AUTHEN);
- TRACE_RET(chip, STATUS_FAIL);
- }
- if (check_ms_err(chip)) {
- set_sense_type(chip, lun, SENSE_TYPE_MG_KEY_FAIL_NOT_AUTHEN);
- rtsx_clear_ms_error(chip);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- ms_card->mg_auth = 1;
-
- return STATUS_SUCCESS;
-}
-
-int mg_get_ICV(struct scsi_cmnd *srb, struct rtsx_chip *chip)
-{
- struct ms_info *ms_card = &(chip->ms_card);
- int retval;
- int bufflen;
- unsigned int lun = SCSI_LUN(srb);
- u8 *buf = NULL;
-
- RTSX_DEBUGP("--%s--\n", __func__);
-
- ms_cleanup_work(chip);
-
- retval = ms_switch_clock(chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- buf = kmalloc(1028, GFP_KERNEL);
- if (!buf)
- TRACE_RET(chip, STATUS_ERROR);
-
- buf[0] = 0x04;
- buf[1] = 0x02;
- buf[2] = 0x00;
- buf[3] = 0x00;
-
- retval = mg_send_ex_cmd(chip, MG_GET_IBD, ms_card->mg_entry_num);
- if (retval != STATUS_SUCCESS) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_UNRECOVER_READ_ERR);
- TRACE_GOTO(chip, GetICVFinish);
- }
-
- retval = ms_transfer_data(chip, MS_TM_AUTO_READ, PRO_READ_LONG_DATA,
- 2, WAIT_INT, 0, 0, buf + 4, 1024);
- if (retval != STATUS_SUCCESS) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_UNRECOVER_READ_ERR);
- rtsx_clear_ms_error(chip);
- TRACE_GOTO(chip, GetICVFinish);
- }
- if (check_ms_err(chip)) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_UNRECOVER_READ_ERR);
- rtsx_clear_ms_error(chip);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- bufflen = min(1028, (int)scsi_bufflen(srb));
- rtsx_stor_set_xfer_buf(buf, bufflen, srb);
-
-GetICVFinish:
- kfree(buf);
- return retval;
-}
-
-int mg_set_ICV(struct scsi_cmnd *srb, struct rtsx_chip *chip)
-{
- struct ms_info *ms_card = &(chip->ms_card);
- int retval;
- int bufflen;
-#ifdef MG_SET_ICV_SLOW
- int i;
-#endif
- unsigned int lun = SCSI_LUN(srb);
- u8 *buf = NULL;
-
- RTSX_DEBUGP("--%s--\n", __func__);
-
- ms_cleanup_work(chip);
-
- retval = ms_switch_clock(chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- buf = kmalloc(1028, GFP_KERNEL);
- if (!buf)
- TRACE_RET(chip, STATUS_ERROR);
-
- bufflen = min(1028, (int)scsi_bufflen(srb));
- rtsx_stor_get_xfer_buf(buf, bufflen, srb);
-
- retval = mg_send_ex_cmd(chip, MG_SET_IBD, ms_card->mg_entry_num);
- if (retval != STATUS_SUCCESS) {
- if (ms_card->mg_auth == 0) {
- if ((buf[5] & 0xC0) != 0)
- set_sense_type(chip, lun, SENSE_TYPE_MG_KEY_FAIL_NOT_ESTAB);
- else
- set_sense_type(chip, lun, SENSE_TYPE_MG_WRITE_ERR);
- } else {
- set_sense_type(chip, lun, SENSE_TYPE_MG_WRITE_ERR);
- }
- TRACE_GOTO(chip, SetICVFinish);
- }
-
-#ifdef MG_SET_ICV_SLOW
- for (i = 0; i < 2; i++) {
- udelay(50);
-
- rtsx_init_cmd(chip);
-
- rtsx_add_cmd(chip, WRITE_REG_CMD, MS_TPC, 0xFF, PRO_WRITE_LONG_DATA);
- rtsx_add_cmd(chip, WRITE_REG_CMD, MS_TRANS_CFG, 0xFF, WAIT_INT);
- rtsx_add_cmd(chip, WRITE_REG_CMD, CARD_DATA_SOURCE, 0x01, RING_BUFFER);
-
- trans_dma_enable(DMA_TO_DEVICE, chip, 512, DMA_512);
-
- rtsx_add_cmd(chip, WRITE_REG_CMD, MS_TRANSFER, 0xFF,
- MS_TRANSFER_START | MS_TM_NORMAL_WRITE);
- rtsx_add_cmd(chip, CHECK_REG_CMD, MS_TRANSFER, MS_TRANSFER_END, MS_TRANSFER_END);
-
- rtsx_send_cmd_no_wait(chip);
-
- retval = rtsx_transfer_data(chip, MS_CARD, buf + 4 + i*512, 512, 0, DMA_TO_DEVICE, 3000);
- if ((retval < 0) || check_ms_err(chip)) {
- rtsx_clear_ms_error(chip);
- if (ms_card->mg_auth == 0) {
- if ((buf[5] & 0xC0) != 0)
- set_sense_type(chip, lun, SENSE_TYPE_MG_KEY_FAIL_NOT_ESTAB);
- else
- set_sense_type(chip, lun, SENSE_TYPE_MG_WRITE_ERR);
- } else {
- set_sense_type(chip, lun, SENSE_TYPE_MG_WRITE_ERR);
- }
- retval = STATUS_FAIL;
- TRACE_GOTO(chip, SetICVFinish);
- }
- }
-#else
- retval = ms_transfer_data(chip, MS_TM_AUTO_WRITE, PRO_WRITE_LONG_DATA,
- 2, WAIT_INT, 0, 0, buf + 4, 1024);
- if ((retval != STATUS_SUCCESS) || check_ms_err(chip)) {
- rtsx_clear_ms_error(chip);
- if (ms_card->mg_auth == 0) {
- if ((buf[5] & 0xC0) != 0)
- set_sense_type(chip, lun, SENSE_TYPE_MG_KEY_FAIL_NOT_ESTAB);
- else
- set_sense_type(chip, lun, SENSE_TYPE_MG_WRITE_ERR);
- } else {
- set_sense_type(chip, lun, SENSE_TYPE_MG_WRITE_ERR);
- }
- TRACE_GOTO(chip, SetICVFinish);
- }
-#endif
-
-SetICVFinish:
- kfree(buf);
- return retval;
-}
-
-#endif /* SUPPORT_MAGIC_GATE */
-
-void ms_cleanup_work(struct rtsx_chip *chip)
-{
- struct ms_info *ms_card = &(chip->ms_card);
-
- if (CHK_MSPRO(ms_card)) {
- if (ms_card->seq_mode) {
- RTSX_DEBUGP("MS Pro: stop transmission\n");
- mspro_stop_seq_mode(chip);
- ms_card->cleanup_counter = 0;
- }
- if (CHK_MSHG(ms_card)) {
- rtsx_write_register(chip, MS_CFG,
- MS_2K_SECTOR_MODE, 0x00);
- }
- }
-#ifdef MS_DELAY_WRITE
- else if ((!CHK_MSPRO(ms_card)) && ms_card->delay_write.delay_write_flag) {
- RTSX_DEBUGP("MS: delay write\n");
- ms_delay_write(chip);
- ms_card->cleanup_counter = 0;
- }
-#endif
-}
-
-int ms_power_off_card3v3(struct rtsx_chip *chip)
-{
- int retval;
-
- retval = disable_card_clock(chip, MS_CARD);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- if (chip->asic_code) {
- retval = ms_pull_ctl_disable(chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
- } else {
- RTSX_WRITE_REG(chip, FPGA_PULL_CTL,
- FPGA_MS_PULL_CTL_BIT | 0x20, FPGA_MS_PULL_CTL_BIT);
- }
- RTSX_WRITE_REG(chip, CARD_OE, MS_OUTPUT_EN, 0);
- if (!chip->ft2_fast_mode) {
- retval = card_power_off(chip, MS_CARD);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- return STATUS_SUCCESS;
-}
-
-int release_ms_card(struct rtsx_chip *chip)
-{
- struct ms_info *ms_card = &(chip->ms_card);
- int retval;
-
- RTSX_DEBUGP("release_ms_card\n");
-
-#ifdef MS_DELAY_WRITE
- ms_card->delay_write.delay_write_flag = 0;
-#endif
- ms_card->pro_under_formatting = 0;
-
- chip->card_ready &= ~MS_CARD;
- chip->card_fail &= ~MS_CARD;
- chip->card_wp &= ~MS_CARD;
-
- ms_free_l2p_tbl(chip);
-
- memset(ms_card->raw_sys_info, 0, 96);
-#ifdef SUPPORT_PCGL_1P18
- memset(ms_card->raw_model_name, 0, 48);
-#endif
-
- retval = ms_power_off_card3v3(chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- return STATUS_SUCCESS;
-}
-
diff --git a/drivers/staging/rts_pstor/ms.h b/drivers/staging/rts_pstor/ms.h
deleted file mode 100644
index 5370198..0000000
--- a/drivers/staging/rts_pstor/ms.h
+++ /dev/null
@@ -1,225 +0,0 @@
-/* Driver for Realtek PCI-Express card reader
- * Header file
- *
- * Copyright(c) 2009 Realtek Semiconductor Corp. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, see <http://www.gnu.org/licenses/>.
- *
- * Author:
- * wwang (wei_wang@realsil.com.cn)
- * No. 450, Shenhu Road, Suzhou Industry Park, Suzhou, China
- */
-
-#ifndef __REALTEK_RTSX_MS_H
-#define __REALTEK_RTSX_MS_H
-
-#define MS_DELAY_WRITE
-
-#define MS_MAX_RETRY_COUNT 3
-
-#define MS_EXTRA_SIZE 0x9
-
-#define WRT_PRTCT 0x01
-
-/* Error Code */
-#define MS_NO_ERROR 0x00
-#define MS_CRC16_ERROR 0x80
-#define MS_TO_ERROR 0x40
-#define MS_NO_CARD 0x20
-#define MS_NO_MEMORY 0x10
-#define MS_CMD_NK 0x08
-#define MS_FLASH_READ_ERROR 0x04
-#define MS_FLASH_WRITE_ERROR 0x02
-#define MS_BREQ_ERROR 0x01
-#define MS_NOT_FOUND 0x03
-
-/* Transfer Protocol Command */
-#define READ_PAGE_DATA 0x02
-#define READ_REG 0x04
-#define GET_INT 0x07
-#define WRITE_PAGE_DATA 0x0D
-#define WRITE_REG 0x0B
-#define SET_RW_REG_ADRS 0x08
-#define SET_CMD 0x0E
-
-#define PRO_READ_LONG_DATA 0x02
-#define PRO_READ_SHORT_DATA 0x03
-#define PRO_READ_REG 0x04
-#define PRO_READ_QUAD_DATA 0x05
-#define PRO_GET_INT 0x07
-#define PRO_WRITE_LONG_DATA 0x0D
-#define PRO_WRITE_SHORT_DATA 0x0C
-#define PRO_WRITE_QUAD_DATA 0x0A
-#define PRO_WRITE_REG 0x0B
-#define PRO_SET_RW_REG_ADRS 0x08
-#define PRO_SET_CMD 0x0E
-#define PRO_EX_SET_CMD 0x09
-
-#ifdef SUPPORT_MAGIC_GATE
-
-#define MG_GET_ID 0x40
-#define MG_SET_LID 0x41
-#define MG_GET_LEKB 0x42
-#define MG_SET_RD 0x43
-#define MG_MAKE_RMS 0x44
-#define MG_MAKE_KSE 0x45
-#define MG_SET_IBD 0x46
-#define MG_GET_IBD 0x47
-
-#endif
-
-#ifdef XC_POWERCLASS
-#define XC_CHG_POWER 0x16
-#endif
-
-#define BLOCK_READ 0xAA
-#define BLOCK_WRITE 0x55
-#define BLOCK_END 0x33
-#define BLOCK_ERASE 0x99
-#define FLASH_STOP 0xCC
-
-#define SLEEP 0x5A
-#define CLEAR_BUF 0xC3
-#define MS_RESET 0x3C
-
-#define PRO_READ_DATA 0x20
-#define PRO_WRITE_DATA 0x21
-#define PRO_READ_ATRB 0x24
-#define PRO_STOP 0x25
-#define PRO_ERASE 0x26
-#define PRO_READ_2K_DATA 0x27
-#define PRO_WRITE_2K_DATA 0x28
-
-#define PRO_FORMAT 0x10
-#define PRO_SLEEP 0x11
-
-#define IntReg 0x01
-#define StatusReg0 0x02
-#define StatusReg1 0x03
-
-#define SystemParm 0x10
-#define BlockAdrs 0x11
-#define CMDParm 0x14
-#define PageAdrs 0x15
-
-#define OverwriteFlag 0x16
-#define ManagemenFlag 0x17
-#define LogicalAdrs 0x18
-#define ReserveArea 0x1A
-
-#define Pro_IntReg 0x01
-#define Pro_StatusReg 0x02
-#define Pro_TypeReg 0x04
-#define Pro_IFModeReg 0x05
-#define Pro_CatagoryReg 0x06
-#define Pro_ClassReg 0x07
-
-
-#define Pro_SystemParm 0x10
-#define Pro_DataCount1 0x11
-#define Pro_DataCount0 0x12
-#define Pro_DataAddr3 0x13
-#define Pro_DataAddr2 0x14
-#define Pro_DataAddr1 0x15
-#define Pro_DataAddr0 0x16
-
-#define Pro_TPCParm 0x17
-#define Pro_CMDParm 0x18
-
-#define INT_REG_CED 0x80
-#define INT_REG_ERR 0x40
-#define INT_REG_BREQ 0x20
-#define INT_REG_CMDNK 0x01
-
-#define BLOCK_BOOT 0xC0
-#define BLOCK_OK 0x80
-#define PAGE_OK 0x60
-#define DATA_COMPL 0x10
-
-#define NOT_BOOT_BLOCK 0x4
-#define NOT_TRANSLATION_TABLE 0x8
-
-#define HEADER_ID0 PPBUF_BASE2
-#define HEADER_ID1 (PPBUF_BASE2 + 1)
-#define DISABLED_BLOCK0 (PPBUF_BASE2 + 0x170 + 4)
-#define DISABLED_BLOCK1 (PPBUF_BASE2 + 0x170 + 5)
-#define DISABLED_BLOCK2 (PPBUF_BASE2 + 0x170 + 6)
-#define DISABLED_BLOCK3 (PPBUF_BASE2 + 0x170 + 7)
-#define BLOCK_SIZE_0 (PPBUF_BASE2 + 0x1a0 + 2)
-#define BLOCK_SIZE_1 (PPBUF_BASE2 + 0x1a0 + 3)
-#define BLOCK_COUNT_0 (PPBUF_BASE2 + 0x1a0 + 4)
-#define BLOCK_COUNT_1 (PPBUF_BASE2 + 0x1a0 + 5)
-#define EBLOCK_COUNT_0 (PPBUF_BASE2 + 0x1a0 + 6)
-#define EBLOCK_COUNT_1 (PPBUF_BASE2 + 0x1a0 + 7)
-#define PAGE_SIZE_0 (PPBUF_BASE2 + 0x1a0 + 8)
-#define PAGE_SIZE_1 (PPBUF_BASE2 + 0x1a0 + 9)
-
-#define MS_Device_Type (PPBUF_BASE2 + 0x1D8)
-
-#define MS_4bit_Support (PPBUF_BASE2 + 0x1D3)
-
-#define setPS_NG 1
-#define setPS_Error 0
-
-#define PARALLEL_8BIT_IF 0x40
-#define PARALLEL_4BIT_IF 0x00
-#define SERIAL_IF 0x80
-
-#define BUF_FULL 0x10
-#define BUF_EMPTY 0x20
-
-#define MEDIA_BUSY 0x80
-#define FLASH_BUSY 0x40
-#define DATA_ERROR 0x20
-#define STS_UCDT 0x10
-#define EXTRA_ERROR 0x08
-#define STS_UCEX 0x04
-#define FLAG_ERROR 0x02
-#define STS_UCFG 0x01
-
-#define MS_SHORT_DATA_LEN 32
-
-#define FORMAT_SUCCESS 0
-#define FORMAT_FAIL 1
-#define FORMAT_IN_PROGRESS 2
-
-#define MS_SET_BAD_BLOCK_FLG(ms_card) ((ms_card)->multi_flag |= 0x80)
-#define MS_CLR_BAD_BLOCK_FLG(ms_card) ((ms_card)->multi_flag &= 0x7F)
-#define MS_TST_BAD_BLOCK_FLG(ms_card) ((ms_card)->multi_flag & 0x80)
-
-void mspro_polling_format_status(struct rtsx_chip *chip);
-
-void mspro_stop_seq_mode(struct rtsx_chip *chip);
-int reset_ms_card(struct rtsx_chip *chip);
-int ms_rw(struct scsi_cmnd *srb, struct rtsx_chip *chip, u32 start_sector, u16 sector_cnt);
-int mspro_format(struct scsi_cmnd *srb, struct rtsx_chip *chip, int short_data_len, int quick_format);
-void ms_free_l2p_tbl(struct rtsx_chip *chip);
-void ms_cleanup_work(struct rtsx_chip *chip);
-int ms_power_off_card3v3(struct rtsx_chip *chip);
-int release_ms_card(struct rtsx_chip *chip);
-#ifdef MS_DELAY_WRITE
-int ms_delay_write(struct rtsx_chip *chip);
-#endif
-
-#ifdef SUPPORT_MAGIC_GATE
-int mg_set_leaf_id(struct scsi_cmnd *srb, struct rtsx_chip *chip);
-int mg_get_local_EKB(struct scsi_cmnd *srb, struct rtsx_chip *chip);
-int mg_chg(struct scsi_cmnd *srb, struct rtsx_chip *chip);
-int mg_get_rsp_chg(struct scsi_cmnd *srb, struct rtsx_chip *chip);
-int mg_rsp(struct scsi_cmnd *srb, struct rtsx_chip *chip);
-int mg_get_ICV(struct scsi_cmnd *srb, struct rtsx_chip *chip);
-int mg_set_ICV(struct scsi_cmnd *srb, struct rtsx_chip *chip);
-#endif
-
-#endif /* __REALTEK_RTSX_MS_H */
diff --git a/drivers/staging/rts_pstor/rtsx.c b/drivers/staging/rts_pstor/rtsx.c
deleted file mode 100644
index afe9c2e..0000000
--- a/drivers/staging/rts_pstor/rtsx.c
+++ /dev/null
@@ -1,1105 +0,0 @@
-/* Driver for Realtek PCI-Express card reader
- *
- * Copyright(c) 2009 Realtek Semiconductor Corp. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, see <http://www.gnu.org/licenses/>.
- *
- * Author:
- * wwang (wei_wang@realsil.com.cn)
- * No. 450, Shenhu Road, Suzhou Industry Park, Suzhou, China
- */
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/blkdev.h>
-#include <linux/kthread.h>
-#include <linux/sched.h>
-#include <linux/workqueue.h>
-
-#include "rtsx.h"
-#include "rtsx_chip.h"
-#include "rtsx_transport.h"
-#include "rtsx_scsi.h"
-#include "rtsx_card.h"
-#include "general.h"
-
-#include "ms.h"
-#include "sd.h"
-#include "xd.h"
-
-#define DRIVER_VERSION "v1.10"
-
-MODULE_DESCRIPTION("Realtek PCI-Express card reader driver");
-MODULE_LICENSE("GPL");
-MODULE_VERSION(DRIVER_VERSION);
-
-static unsigned int delay_use = 1;
-module_param(delay_use, uint, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(delay_use, "seconds to delay before using a new device");
-
-static int ss_en;
-module_param(ss_en, int, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(ss_en, "enable selective suspend");
-
-static int ss_interval = 50;
-module_param(ss_interval, int, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(ss_interval, "Interval to enter ss state in seconds");
-
-static int auto_delink_en;
-module_param(auto_delink_en, int, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(auto_delink_en, "enable auto delink");
-
-static unsigned char aspm_l0s_l1_en;
-module_param(aspm_l0s_l1_en, byte, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(aspm_l0s_l1_en, "enable device aspm");
-
-static int msi_en;
-module_param(msi_en, int, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(msi_en, "enable msi");
-
-static irqreturn_t rtsx_interrupt(int irq, void *dev_id);
-
-/***********************************************************************
- * Host functions
- ***********************************************************************/
-
-static const char *host_info(struct Scsi_Host *host)
-{
- return "SCSI emulation for PCI-Express Mass Storage devices";
-}
-
-static int slave_alloc(struct scsi_device *sdev)
-{
- /*
- * Set the INQUIRY transfer length to 36. We don't use any of
- * the extra data and many devices choke if asked for more or
- * less than 36 bytes.
- */
- sdev->inquiry_len = 36;
- return 0;
-}
-
-static int slave_configure(struct scsi_device *sdev)
-{
- /* Scatter-gather buffers (all but the last) must have a length
- * divisible by the bulk maxpacket size. Otherwise a data packet
- * would end up being short, causing a premature end to the data
- * transfer. Since high-speed bulk pipes have a maxpacket size
- * of 512, we'll use that as the scsi device queue's DMA alignment
- * mask. Guaranteeing proper alignment of the first buffer will
- * have the desired effect because, except at the beginning and
- * the end, scatter-gather buffers follow page boundaries. */
- blk_queue_dma_alignment(sdev->request_queue, (512 - 1));
-
- /* Set the SCSI level to at least 2. We'll leave it at 3 if that's
- * what is originally reported. We need this to avoid confusing
- * the SCSI layer with devices that report 0 or 1, but need 10-byte
- * commands (ala ATAPI devices behind certain bridges, or devices
- * which simply have broken INQUIRY data).
- *
- * NOTE: This means /dev/sg programs (ala cdrecord) will get the
- * actual information. This seems to be the preference for
- * programs like that.
- *
- * NOTE: This also means that /proc/scsi/scsi and sysfs may report
- * the actual value or the modified one, depending on where the
- * data comes from.
- */
- if (sdev->scsi_level < SCSI_2)
- sdev->scsi_level = sdev->sdev_target->scsi_level = SCSI_2;
-
- return 0;
-}
-
-
-/***********************************************************************
- * /proc/scsi/ functions
- ***********************************************************************/
-
-/* we use this macro to help us write into the buffer */
-#undef SPRINTF
-#define SPRINTF(args...) \
- do { if (pos < buffer+length) pos += sprintf(pos, ## args); } while (0)
-
-static int proc_info(struct Scsi_Host *host, char *buffer,
- char **start, off_t offset, int length, int inout)
-{
- char *pos = buffer;
-
- /* if someone is sending us data, just throw it away */
- if (inout)
- return length;
-
- /* print the controller name */
- SPRINTF(" Host scsi%d: %s\n", host->host_no, CR_DRIVER_NAME);
-
- /* print product, vendor, and driver version strings */
- SPRINTF(" Vendor: Realtek Corp.\n");
- SPRINTF(" Product: PCIE Card Reader\n");
- SPRINTF(" Version: %s\n", DRIVER_VERSION);
-
- /*
- * Calculate start of next buffer, and return value.
- */
- *start = buffer + offset;
-
- if ((pos - buffer) < offset)
- return 0;
- else if ((pos - buffer - offset) < length)
- return pos - buffer - offset;
- else
- return length;
-}
-
-/* queue a command */
-/* This is always called with scsi_lock(host) held */
-static int queuecommand_lck(struct scsi_cmnd *srb,
- void (*done)(struct scsi_cmnd *))
-{
- struct rtsx_dev *dev = host_to_rtsx(srb->device->host);
- struct rtsx_chip *chip = dev->chip;
-
- /* check for state-transition errors */
- if (chip->srb != NULL) {
- dev_err(&dev->pci->dev, "Error in %s: chip->srb = %p\n",
- __func__, chip->srb);
- return SCSI_MLQUEUE_HOST_BUSY;
- }
-
- /* fail the command if we are disconnecting */
- if (rtsx_chk_stat(chip, RTSX_STAT_DISCONNECT)) {
- dev_info(&dev->pci->dev, "Fail command during disconnect\n");
- srb->result = DID_NO_CONNECT << 16;
- done(srb);
- return 0;
- }
-
- /* enqueue the command and wake up the control thread */
- srb->scsi_done = done;
- chip->srb = srb;
- complete(&dev->cmnd_ready);
-
- return 0;
-}
-
-static DEF_SCSI_QCMD(queuecommand)
-
-/***********************************************************************
- * Error handling functions
- ***********************************************************************/
-
-/* Command timeout and abort */
-static int command_abort(struct scsi_cmnd *srb)
-{
- struct Scsi_Host *host = srb->device->host;
- struct rtsx_dev *dev = host_to_rtsx(host);
- struct rtsx_chip *chip = dev->chip;
-
- dev_info(&dev->pci->dev, "%s called\n", __func__);
-
- scsi_lock(host);
-
- /* Is this command still active? */
- if (chip->srb != srb) {
- scsi_unlock(host);
- dev_info(&dev->pci->dev, "-- nothing to abort\n");
- return FAILED;
- }
-
- rtsx_set_stat(chip, RTSX_STAT_ABORT);
-
- scsi_unlock(host);
-
- /* Wait for the aborted command to finish */
- wait_for_completion(&dev->notify);
-
- return SUCCESS;
-}
-
-/* This invokes the transport reset mechanism to reset the state of the
- * device */
-static int device_reset(struct scsi_cmnd *srb)
-{
- int result = 0;
- struct rtsx_dev *dev = host_to_rtsx(srb->device->host);
-
- dev_info(&dev->pci->dev, "%s called\n", __func__);
-
- return result < 0 ? FAILED : SUCCESS;
-}
-
-/* Simulate a SCSI bus reset by resetting the device's USB port. */
-static int bus_reset(struct scsi_cmnd *srb)
-{
- int result = 0;
- struct rtsx_dev *dev = host_to_rtsx(srb->device->host);
-
- dev_info(&dev->pci->dev, "%s called\n", __func__);
-
- return result < 0 ? FAILED : SUCCESS;
-}
-
-
-/*
- * this defines our host template, with which we'll allocate hosts
- */
-
-static struct scsi_host_template rtsx_host_template = {
- /* basic userland interface stuff */
- .name = CR_DRIVER_NAME,
- .proc_name = CR_DRIVER_NAME,
- .proc_info = proc_info,
- .info = host_info,
-
- /* command interface -- queued only */
- .queuecommand = queuecommand,
-
- /* error and abort handlers */
- .eh_abort_handler = command_abort,
- .eh_device_reset_handler = device_reset,
- .eh_bus_reset_handler = bus_reset,
-
- /* queue commands only, only one command per LUN */
- .can_queue = 1,
- .cmd_per_lun = 1,
-
- /* unknown initiator id */
- .this_id = -1,
-
- .slave_alloc = slave_alloc,
- .slave_configure = slave_configure,
-
- /* lots of sg segments can be handled */
- .sg_tablesize = SG_ALL,
-
- /* limit the total size of a transfer to 120 KB */
- .max_sectors = 240,
-
- /* merge commands... this seems to help performance, but
- * periodically someone should test to see which setting is more
- * optimal.
- */
- .use_clustering = 1,
-
- /* emulated HBA */
- .emulated = 1,
-
- /* we do our own delay after a device or bus reset */
- .skip_settle_delay = 1,
-
- /* module management */
- .module = THIS_MODULE
-};
-
-
-static int rtsx_acquire_irq(struct rtsx_dev *dev)
-{
- struct rtsx_chip *chip = dev->chip;
-
- dev_info(&dev->pci->dev, "%s: chip->msi_en = %d, pci->irq = %d\n",
- __func__, chip->msi_en, dev->pci->irq);
-
- if (request_irq(dev->pci->irq, rtsx_interrupt,
- chip->msi_en ? 0 : IRQF_SHARED,
- CR_DRIVER_NAME, dev)) {
- dev_err(&dev->pci->dev,
- "rtsx: unable to grab IRQ %d, disabling device\n",
- dev->pci->irq);
- return -1;
- }
-
- dev->irq = dev->pci->irq;
- pci_intx(dev->pci, !chip->msi_en);
-
- return 0;
-}
-
-
-int rtsx_read_pci_cfg_byte(u8 bus, u8 dev, u8 func, u8 offset, u8 *val)
-{
- struct pci_dev *pdev;
- u8 data;
- u8 devfn = (dev << 3) | func;
-
- pdev = pci_get_bus_and_slot(bus, devfn);
- if (!pdev)
- return -1;
-
- pci_read_config_byte(pdev, offset, &data);
- if (val)
- *val = data;
-
- return 0;
-}
-
-#ifdef CONFIG_PM
-/*
- * power management
- */
-static int rtsx_suspend(struct pci_dev *pci, pm_message_t state)
-{
- struct rtsx_dev *dev = (struct rtsx_dev *)pci_get_drvdata(pci);
- struct rtsx_chip *chip;
-
- if (!dev)
- return 0;
-
- /* lock the device pointers */
- mutex_lock(&(dev->dev_mutex));
-
- chip = dev->chip;
-
- rtsx_do_before_power_down(chip, PM_S3);
-
- if (dev->irq >= 0) {
- synchronize_irq(dev->irq);
- free_irq(dev->irq, (void *)dev);
- dev->irq = -1;
- }
-
- if (chip->msi_en)
- pci_disable_msi(pci);
-
- pci_save_state(pci);
- pci_enable_wake(pci, pci_choose_state(pci, state), 1);
- pci_disable_device(pci);
- pci_set_power_state(pci, pci_choose_state(pci, state));
-
- /* unlock the device pointers */
- mutex_unlock(&dev->dev_mutex);
-
- return 0;
-}
-
-static int rtsx_resume(struct pci_dev *pci)
-{
- struct rtsx_dev *dev = (struct rtsx_dev *)pci_get_drvdata(pci);
- struct rtsx_chip *chip;
-
- if (!dev)
- return 0;
-
- chip = dev->chip;
-
- /* lock the device pointers */
- mutex_lock(&(dev->dev_mutex));
-
- pci_set_power_state(pci, PCI_D0);
- pci_restore_state(pci);
- if (pci_enable_device(pci) < 0) {
- dev_err(&dev->pci->dev,
- "%s: pci_enable_device failed, disabling device\n",
- CR_DRIVER_NAME);
- /* unlock the device pointers */
- mutex_unlock(&dev->dev_mutex);
- return -EIO;
- }
- pci_set_master(pci);
-
- if (chip->msi_en) {
- if (pci_enable_msi(pci) < 0)
- chip->msi_en = 0;
- }
-
- if (rtsx_acquire_irq(dev) < 0) {
- /* unlock the device pointers */
- mutex_unlock(&dev->dev_mutex);
- return -EIO;
- }
-
- rtsx_write_register(chip, HOST_SLEEP_STATE, 0x03, 0x00);
- rtsx_init_chip(chip);
-
- /* unlock the device pointers */
- mutex_unlock(&dev->dev_mutex);
-
- return 0;
-}
-#endif /* CONFIG_PM */
-
-static void rtsx_shutdown(struct pci_dev *pci)
-{
- struct rtsx_dev *dev = (struct rtsx_dev *)pci_get_drvdata(pci);
- struct rtsx_chip *chip;
-
- if (!dev)
- return;
-
- chip = dev->chip;
-
- rtsx_do_before_power_down(chip, PM_S1);
-
- if (dev->irq >= 0) {
- synchronize_irq(dev->irq);
- free_irq(dev->irq, (void *)dev);
- dev->irq = -1;
- }
-
- if (chip->msi_en)
- pci_disable_msi(pci);
-
- pci_disable_device(pci);
-
- return;
-}
-
-static int rtsx_control_thread(void *__dev)
-{
- struct rtsx_dev *dev = (struct rtsx_dev *)__dev;
- struct rtsx_chip *chip = dev->chip;
- struct Scsi_Host *host = rtsx_to_host(dev);
-
- for (;;) {
- if (wait_for_completion_interruptible(&dev->cmnd_ready))
- break;
-
- /* lock the device pointers */
- mutex_lock(&(dev->dev_mutex));
-
- /* if the device has disconnected, we are free to exit */
- if (rtsx_chk_stat(chip, RTSX_STAT_DISCONNECT)) {
- dev_info(&dev->pci->dev, "-- rtsx-control exiting\n");
- mutex_unlock(&dev->dev_mutex);
- break;
- }
-
- /* lock access to the state */
- scsi_lock(host);
-
- /* has the command aborted ? */
- if (rtsx_chk_stat(chip, RTSX_STAT_ABORT)) {
- chip->srb->result = DID_ABORT << 16;
- goto SkipForAbort;
- }
-
- scsi_unlock(host);
-
- /* reject the command if the direction indicator
- * is UNKNOWN
- */
- if (chip->srb->sc_data_direction == DMA_BIDIRECTIONAL) {
- dev_err(&dev->pci->dev, "UNKNOWN data direction\n");
- chip->srb->result = DID_ERROR << 16;
- }
-
- /* reject if target != 0 or if LUN is higher than
- * the maximum known LUN
- */
- else if (chip->srb->device->id) {
- dev_err(&dev->pci->dev, "Bad target number (%d:%d)\n",
- chip->srb->device->id,
- chip->srb->device->lun);
- chip->srb->result = DID_BAD_TARGET << 16;
- }
-
- else if (chip->srb->device->lun > chip->max_lun) {
- dev_err(&dev->pci->dev, "Bad LUN (%d:%d)\n",
- chip->srb->device->id,
- chip->srb->device->lun);
- chip->srb->result = DID_BAD_TARGET << 16;
- }
-
- /* we've got a command, let's do it! */
- else {
- RTSX_DEBUG(scsi_show_command(chip->srb));
- rtsx_invoke_transport(chip->srb, chip);
- }
-
- /* lock access to the state */
- scsi_lock(host);
-
- /* did the command already complete because of a disconnect? */
- if (!chip->srb)
- ; /* nothing to do */
-
- /* indicate that the command is done */
- else if (chip->srb->result != DID_ABORT << 16) {
- chip->srb->scsi_done(chip->srb);
- } else {
-SkipForAbort:
- dev_err(&dev->pci->dev, "scsi command aborted\n");
- }
-
- if (rtsx_chk_stat(chip, RTSX_STAT_ABORT)) {
- complete(&(dev->notify));
-
- rtsx_set_stat(chip, RTSX_STAT_IDLE);
- }
-
- /* finished working on this command */
- chip->srb = NULL;
- scsi_unlock(host);
-
- /* unlock the device pointers */
- mutex_unlock(&dev->dev_mutex);
- } /* for (;;) */
-
- /* notify the exit routine that we're actually exiting now
- *
- * complete()/wait_for_completion() is similar to up()/down(),
- * except that complete() is safe in the case where the structure
- * is getting deleted in a parallel mode of execution (i.e. just
- * after the down() -- that's necessary for the thread-shutdown
- * case.
- *
- * complete_and_exit() goes even further than this -- it is safe in
- * the case that the thread of the caller is going away (not just
- * the structure) -- this is necessary for the module-remove case.
- * This is important in preemption kernels, which transfer the flow
- * of execution immediately upon a complete().
- */
- complete_and_exit(&dev->control_exit, 0);
-}
-
-
-static int rtsx_polling_thread(void *__dev)
-{
- struct rtsx_dev *dev = (struct rtsx_dev *)__dev;
- struct rtsx_chip *chip = dev->chip;
- struct sd_info *sd_card = &(chip->sd_card);
- struct xd_info *xd_card = &(chip->xd_card);
- struct ms_info *ms_card = &(chip->ms_card);
-
- sd_card->cleanup_counter = 0;
- xd_card->cleanup_counter = 0;
- ms_card->cleanup_counter = 0;
-
- /* Wait until SCSI scan finished */
- wait_timeout((delay_use + 5) * 1000);
-
- for (;;) {
-
- set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(POLLING_INTERVAL);
-
- /* lock the device pointers */
- mutex_lock(&(dev->dev_mutex));
-
- /* if the device has disconnected, we are free to exit */
- if (rtsx_chk_stat(chip, RTSX_STAT_DISCONNECT)) {
- dev_info(&dev->pci->dev, "-- rtsx-polling exiting\n");
- mutex_unlock(&dev->dev_mutex);
- break;
- }
-
- mutex_unlock(&dev->dev_mutex);
-
- mspro_polling_format_status(chip);
-
- /* lock the device pointers */
- mutex_lock(&(dev->dev_mutex));
-
- rtsx_polling_func(chip);
-
- /* unlock the device pointers */
- mutex_unlock(&dev->dev_mutex);
- }
-
- complete_and_exit(&dev->polling_exit, 0);
-}
-
-/*
- * interrupt handler
- */
-static irqreturn_t rtsx_interrupt(int irq, void *dev_id)
-{
- struct rtsx_dev *dev = dev_id;
- struct rtsx_chip *chip;
- int retval;
- u32 status;
-
- if (dev)
- chip = dev->chip;
- else
- return IRQ_NONE;
-
- if (!chip)
- return IRQ_NONE;
-
- spin_lock(&dev->reg_lock);
-
- retval = rtsx_pre_handle_interrupt(chip);
- if (retval == STATUS_FAIL) {
- spin_unlock(&dev->reg_lock);
- if (chip->int_reg == 0xFFFFFFFF)
- return IRQ_HANDLED;
- else
- return IRQ_NONE;
- }
-
- status = chip->int_reg;
-
- if (dev->check_card_cd) {
- if (!(dev->check_card_cd & status)) {
- /* card not exist, return TRANS_RESULT_FAIL */
- dev->trans_result = TRANS_RESULT_FAIL;
- if (dev->done)
- complete(dev->done);
- goto Exit;
- }
- }
-
- if (status & (NEED_COMPLETE_INT | DELINK_INT)) {
- if (status & (TRANS_FAIL_INT | DELINK_INT)) {
- if (status & DELINK_INT)
- RTSX_SET_DELINK(chip);
- dev->trans_result = TRANS_RESULT_FAIL;
- if (dev->done)
- complete(dev->done);
- } else if (status & TRANS_OK_INT) {
- dev->trans_result = TRANS_RESULT_OK;
- if (dev->done)
- complete(dev->done);
- } else if (status & DATA_DONE_INT) {
- dev->trans_result = TRANS_NOT_READY;
- if (dev->done && (dev->trans_state == STATE_TRANS_SG))
- complete(dev->done);
- }
- }
-
-Exit:
- spin_unlock(&dev->reg_lock);
- return IRQ_HANDLED;
-}
-
-
-/* Release all our dynamic resources */
-static void rtsx_release_resources(struct rtsx_dev *dev)
-{
- dev_info(&dev->pci->dev, "-- %s\n", __func__);
-
- /* Tell the control thread to exit. The SCSI host must
- * already have been removed so it won't try to queue
- * any more commands.
- */
- dev_info(&dev->pci->dev, "-- sending exit command to thread\n");
- complete(&dev->cmnd_ready);
- if (dev->ctl_thread)
- wait_for_completion(&dev->control_exit);
- if (dev->polling_thread)
- wait_for_completion(&dev->polling_exit);
-
- wait_timeout(200);
-
- if (dev->rtsx_resv_buf) {
- dma_free_coherent(&(dev->pci->dev), RTSX_RESV_BUF_LEN,
- dev->rtsx_resv_buf, dev->rtsx_resv_buf_addr);
- dev->chip->host_cmds_ptr = NULL;
- dev->chip->host_sg_tbl_ptr = NULL;
- }
-
- if (dev->irq > 0)
- free_irq(dev->irq, (void *)dev);
- if (dev->chip->msi_en)
- pci_disable_msi(dev->pci);
- if (dev->remap_addr)
- iounmap(dev->remap_addr);
-
- pci_disable_device(dev->pci);
- pci_release_regions(dev->pci);
-
- rtsx_release_chip(dev->chip);
- kfree(dev->chip);
-}
-
-/* First stage of disconnect processing: stop all commands and remove
- * the host */
-static void quiesce_and_remove_host(struct rtsx_dev *dev)
-{
- struct Scsi_Host *host = rtsx_to_host(dev);
- struct rtsx_chip *chip = dev->chip;
-
- /* Prevent new transfers, stop the current command, and
- * interrupt a SCSI-scan or device-reset delay */
- mutex_lock(&dev->dev_mutex);
- scsi_lock(host);
- rtsx_set_stat(chip, RTSX_STAT_DISCONNECT);
- scsi_unlock(host);
- mutex_unlock(&dev->dev_mutex);
- wake_up(&dev->delay_wait);
- wait_for_completion(&dev->scanning_done);
-
- /* Wait some time to let other threads exist */
- wait_timeout(100);
-
- /* queuecommand won't accept any new commands and the control
- * thread won't execute a previously-queued command. If there
- * is such a command pending, complete it with an error. */
- mutex_lock(&dev->dev_mutex);
- if (chip->srb) {
- chip->srb->result = DID_NO_CONNECT << 16;
- scsi_lock(host);
- chip->srb->scsi_done(dev->chip->srb);
- chip->srb = NULL;
- scsi_unlock(host);
- }
- mutex_unlock(&dev->dev_mutex);
-
- /* Now we own no commands so it's safe to remove the SCSI host */
- scsi_remove_host(host);
-}
-
-/* Second stage of disconnect processing: deallocate all resources */
-static void release_everything(struct rtsx_dev *dev)
-{
- rtsx_release_resources(dev);
-
- /* Drop our reference to the host; the SCSI core will free it
- * when the refcount becomes 0. */
- scsi_host_put(rtsx_to_host(dev));
-}
-
-/* Thread to carry out delayed SCSI-device scanning */
-static int rtsx_scan_thread(void *__dev)
-{
- struct rtsx_dev *dev = (struct rtsx_dev *)__dev;
- struct rtsx_chip *chip = dev->chip;
-
- /* Wait for the timeout to expire or for a disconnect */
- if (delay_use > 0) {
- dev_info(&dev->pci->dev,
- "%s: waiting for device to settle before scanning\n",
- CR_DRIVER_NAME);
- wait_event_interruptible_timeout(dev->delay_wait,
- rtsx_chk_stat(chip, RTSX_STAT_DISCONNECT),
- delay_use * HZ);
- }
-
- /* If the device is still connected, perform the scanning */
- if (!rtsx_chk_stat(chip, RTSX_STAT_DISCONNECT)) {
- scsi_scan_host(rtsx_to_host(dev));
- dev_info(&dev->pci->dev, "%s: device scan complete\n",
- CR_DRIVER_NAME);
-
- /* Should we unbind if no devices were detected? */
- }
-
- complete_and_exit(&dev->scanning_done, 0);
-}
-
-static void rtsx_init_options(struct rtsx_chip *chip)
-{
- chip->vendor_id = chip->rtsx->pci->vendor;
- chip->product_id = chip->rtsx->pci->device;
- chip->adma_mode = 1;
- chip->lun_mc = 0;
- chip->driver_first_load = 1;
-#ifdef HW_AUTO_SWITCH_SD_BUS
- chip->sdio_in_charge = 0;
-#endif
-
- chip->mspro_formatter_enable = 1;
- chip->ignore_sd = 0;
- chip->use_hw_setting = 0;
- chip->lun_mode = DEFAULT_SINGLE;
- chip->auto_delink_en = auto_delink_en;
- chip->ss_en = ss_en;
- chip->ss_idle_period = ss_interval * 1000;
- chip->remote_wakeup_en = 0;
- chip->aspm_l0s_l1_en = aspm_l0s_l1_en;
- chip->dynamic_aspm = 1;
- chip->fpga_sd_sdr104_clk = CLK_200;
- chip->fpga_sd_ddr50_clk = CLK_100;
- chip->fpga_sd_sdr50_clk = CLK_100;
- chip->fpga_sd_hs_clk = CLK_100;
- chip->fpga_mmc_52m_clk = CLK_80;
- chip->fpga_ms_hg_clk = CLK_80;
- chip->fpga_ms_4bit_clk = CLK_80;
- chip->fpga_ms_1bit_clk = CLK_40;
- chip->asic_sd_sdr104_clk = 203;
- chip->asic_sd_sdr50_clk = 98;
- chip->asic_sd_ddr50_clk = 98;
- chip->asic_sd_hs_clk = 98;
- chip->asic_mmc_52m_clk = 98;
- chip->asic_ms_hg_clk = 117;
- chip->asic_ms_4bit_clk = 78;
- chip->asic_ms_1bit_clk = 39;
- chip->ssc_depth_sd_sdr104 = SSC_DEPTH_2M;
- chip->ssc_depth_sd_sdr50 = SSC_DEPTH_2M;
- chip->ssc_depth_sd_ddr50 = SSC_DEPTH_1M;
- chip->ssc_depth_sd_hs = SSC_DEPTH_1M;
- chip->ssc_depth_mmc_52m = SSC_DEPTH_1M;
- chip->ssc_depth_ms_hg = SSC_DEPTH_1M;
- chip->ssc_depth_ms_4bit = SSC_DEPTH_512K;
- chip->ssc_depth_low_speed = SSC_DEPTH_512K;
- chip->ssc_en = 1;
- chip->sd_speed_prior = 0x01040203;
- chip->sd_current_prior = 0x00010203;
- chip->sd_ctl = SD_PUSH_POINT_AUTO |
- SD_SAMPLE_POINT_AUTO |
- SUPPORT_MMC_DDR_MODE;
- chip->sd_ddr_tx_phase = 0;
- chip->mmc_ddr_tx_phase = 1;
- chip->sd_default_tx_phase = 15;
- chip->sd_default_rx_phase = 15;
- chip->pmos_pwr_on_interval = 200;
- chip->sd_voltage_switch_delay = 1000;
- chip->ms_power_class_en = 3;
-
- chip->sd_400mA_ocp_thd = 1;
- chip->sd_800mA_ocp_thd = 5;
- chip->ms_ocp_thd = 2;
-
- chip->card_drive_sel = 0x55;
- chip->sd30_drive_sel_1v8 = 0x03;
- chip->sd30_drive_sel_3v3 = 0x01;
-
- chip->do_delink_before_power_down = 1;
- chip->auto_power_down = 1;
- chip->polling_config = 0;
-
- chip->force_clkreq_0 = 1;
- chip->ft2_fast_mode = 0;
-
- chip->sdio_retry_cnt = 1;
-
- chip->xd_timeout = 2000;
- chip->sd_timeout = 10000;
- chip->ms_timeout = 2000;
- chip->mspro_timeout = 15000;
-
- chip->power_down_in_ss = 1;
-
- chip->sdr104_en = 1;
- chip->sdr50_en = 1;
- chip->ddr50_en = 1;
-
- chip->delink_stage1_step = 100;
- chip->delink_stage2_step = 40;
- chip->delink_stage3_step = 20;
-
- chip->auto_delink_in_L1 = 1;
- chip->blink_led = 1;
- chip->msi_en = msi_en;
- chip->hp_watch_bios_hotplug = 0;
- chip->max_payload = 0;
- chip->phy_voltage = 0;
-
- chip->support_ms_8bit = 1;
- chip->s3_pwr_off_delay = 1000;
-}
-
-static int __devinit rtsx_probe(struct pci_dev *pci,
- const struct pci_device_id *pci_id)
-{
- struct Scsi_Host *host;
- struct rtsx_dev *dev;
- int err = 0;
- struct task_struct *th;
-
- RTSX_DEBUGP("Realtek PCI-E card reader detected\n");
-
- err = pci_enable_device(pci);
- if (err < 0) {
- dev_err(&pci->dev, "PCI enable device failed!\n");
- return err;
- }
-
- err = pci_request_regions(pci, CR_DRIVER_NAME);
- if (err < 0) {
- dev_err(&pci->dev, "PCI request regions for %s failed!\n",
- CR_DRIVER_NAME);
- pci_disable_device(pci);
- return err;
- }
-
- /*
- * Ask the SCSI layer to allocate a host structure, with extra
- * space at the end for our private rtsx_dev structure.
- */
- host = scsi_host_alloc(&rtsx_host_template, sizeof(*dev));
- if (!host) {
- dev_err(&pci->dev, "Unable to allocate the scsi host\n");
- pci_release_regions(pci);
- pci_disable_device(pci);
- return -ENOMEM;
- }
-
- dev = host_to_rtsx(host);
- memset(dev, 0, sizeof(struct rtsx_dev));
-
- dev->chip = kzalloc(sizeof(struct rtsx_chip), GFP_KERNEL);
- if (dev->chip == NULL)
- goto errout;
-
- spin_lock_init(&dev->reg_lock);
- mutex_init(&(dev->dev_mutex));
- init_completion(&dev->cmnd_ready);
- init_completion(&dev->control_exit);
- init_completion(&dev->polling_exit);
- init_completion(&(dev->notify));
- init_completion(&dev->scanning_done);
- init_waitqueue_head(&dev->delay_wait);
-
- dev->pci = pci;
- dev->irq = -1;
-
- dev_info(&pci->dev, "Resource length: 0x%x\n",
- (unsigned int)pci_resource_len(pci, 0));
- dev->addr = pci_resource_start(pci, 0);
- dev->remap_addr = ioremap_nocache(dev->addr, pci_resource_len(pci, 0));
- if (dev->remap_addr == NULL) {
- dev_err(&pci->dev, "ioremap error\n");
- err = -ENXIO;
- goto errout;
- }
-
- /*
- * Using "unsigned long" cast here to eliminate gcc warning in
- * 64-bit system
- */
- dev_info(&pci->dev, "Original address: 0x%lx, remapped address: 0x%lx\n",
- (unsigned long)(dev->addr), (unsigned long)(dev->remap_addr));
-
- dev->rtsx_resv_buf = dma_alloc_coherent(&(pci->dev), RTSX_RESV_BUF_LEN,
- &(dev->rtsx_resv_buf_addr), GFP_KERNEL);
- if (dev->rtsx_resv_buf == NULL) {
- dev_err(&pci->dev, "alloc dma buffer fail\n");
- err = -ENXIO;
- goto errout;
- }
- dev->chip->host_cmds_ptr = dev->rtsx_resv_buf;
- dev->chip->host_cmds_addr = dev->rtsx_resv_buf_addr;
- dev->chip->host_sg_tbl_ptr = dev->rtsx_resv_buf + HOST_CMDS_BUF_LEN;
- dev->chip->host_sg_tbl_addr = dev->rtsx_resv_buf_addr +
- HOST_CMDS_BUF_LEN;
-
- dev->chip->rtsx = dev;
-
- rtsx_init_options(dev->chip);
-
- dev_info(&pci->dev, "pci->irq = %d\n", pci->irq);
-
- if (dev->chip->msi_en) {
- if (pci_enable_msi(pci) < 0)
- dev->chip->msi_en = 0;
- }
-
- if (rtsx_acquire_irq(dev) < 0) {
- err = -EBUSY;
- goto errout;
- }
-
- pci_set_master(pci);
- synchronize_irq(dev->irq);
-
- rtsx_init_chip(dev->chip);
-
- /* set the supported max_lun and max_id for the scsi host
- * NOTE: the minimal value of max_id is 1 */
- host->max_id = 1;
- host->max_lun = dev->chip->max_lun;
-
- /* Start up our control thread */
- th = kthread_run(rtsx_control_thread, dev, CR_DRIVER_NAME);
- if (IS_ERR(th)) {
- dev_err(&pci->dev, "Unable to start control thread\n");
- err = PTR_ERR(th);
- goto errout;
- }
- dev->ctl_thread = th;
-
- err = scsi_add_host(host, &pci->dev);
- if (err) {
- dev_err(&pci->dev, "Unable to add the scsi host\n");
- goto errout;
- }
-
- /* Start up the thread for delayed SCSI-device scanning */
- th = kthread_run(rtsx_scan_thread, dev, "rtsx-scan");
- if (IS_ERR(th)) {
- dev_err(&pci->dev, "Unable to start the device-scanning thread\n");
- complete(&dev->scanning_done);
- quiesce_and_remove_host(dev);
- err = PTR_ERR(th);
- goto errout;
- }
-
- /* Start up the thread for polling thread */
- th = kthread_run(rtsx_polling_thread, dev, "rtsx-polling");
- if (IS_ERR(th)) {
- dev_err(&pci->dev, "Unable to start the device-polling thread\n");
- quiesce_and_remove_host(dev);
- err = PTR_ERR(th);
- goto errout;
- }
- dev->polling_thread = th;
-
- pci_set_drvdata(pci, dev);
-
- return 0;
-
- /* We come here if there are any problems */
-errout:
- dev_err(&pci->dev, "rtsx_probe() failed\n");
- release_everything(dev);
-
- return err;
-}
-
-
-static void __devexit rtsx_remove(struct pci_dev *pci)
-{
- struct rtsx_dev *dev = (struct rtsx_dev *)pci_get_drvdata(pci);
-
- dev_info(&pci->dev, "rtsx_remove() called\n");
-
- quiesce_and_remove_host(dev);
- release_everything(dev);
-
- pci_set_drvdata(pci, NULL);
-}
-
-/* PCI IDs */
-static DEFINE_PCI_DEVICE_TABLE(rtsx_ids) = {
- { PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x5208), PCI_CLASS_OTHERS << 16, 0xFF0000 },
- { PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x5209), PCI_CLASS_OTHERS << 16, 0xFF0000 },
- { PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x5288), PCI_CLASS_OTHERS << 16, 0xFF0000 },
- { 0, },
-};
-
-MODULE_DEVICE_TABLE(pci, rtsx_ids);
-
-/* pci_driver definition */
-static struct pci_driver driver = {
- .name = CR_DRIVER_NAME,
- .id_table = rtsx_ids,
- .probe = rtsx_probe,
- .remove = __devexit_p(rtsx_remove),
-#ifdef CONFIG_PM
- .suspend = rtsx_suspend,
- .resume = rtsx_resume,
-#endif
- .shutdown = rtsx_shutdown,
-};
-
-static int __init rtsx_init(void)
-{
- pr_info("Initializing Realtek PCIE storage driver...\n");
-
- return pci_register_driver(&driver);
-}
-
-static void __exit rtsx_exit(void)
-{
- pr_info("rtsx_exit() called\n");
-
- pci_unregister_driver(&driver);
-
- pr_info("%s module exit\n", CR_DRIVER_NAME);
-}
-
-module_init(rtsx_init)
-module_exit(rtsx_exit)
-
diff --git a/drivers/staging/rts_pstor/rtsx.h b/drivers/staging/rts_pstor/rtsx.h
deleted file mode 100644
index 1ab42fc..0000000
--- a/drivers/staging/rts_pstor/rtsx.h
+++ /dev/null
@@ -1,186 +0,0 @@
-/* Driver for Realtek PCI-Express card reader
- * Header file
- *
- * Copyright(c) 2009 Realtek Semiconductor Corp. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, see <http://www.gnu.org/licenses/>.
- *
- * Author:
- * wwang (wei_wang@realsil.com.cn)
- * No. 450, Shenhu Road, Suzhou Industry Park, Suzhou, China
- */
-
-#ifndef __REALTEK_RTSX_H
-#define __REALTEK_RTSX_H
-
-#include <linux/io.h>
-#include <linux/bitops.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/pci.h>
-#include <linux/mutex.h>
-#include <linux/cdrom.h>
-#include <linux/workqueue.h>
-#include <linux/timer.h>
-#include <linux/time.h>
-
-#include <scsi/scsi.h>
-#include <scsi/scsi_cmnd.h>
-#include <scsi/scsi_device.h>
-#include <scsi/scsi_devinfo.h>
-#include <scsi/scsi_eh.h>
-#include <scsi/scsi_host.h>
-
-#include "debug.h"
-#include "trace.h"
-#include "general.h"
-
-#define CR_DRIVER_NAME "rts_pstor"
-
-#define pci_get_bus_and_slot(bus, devfn) \
- pci_get_domain_bus_and_slot(0, (bus), (devfn))
-
-/*
- * macros for easy use
- */
-#define rtsx_writel(chip, reg, value) \
- iowrite32(value, (chip)->rtsx->remap_addr + reg)
-#define rtsx_readl(chip, reg) \
- ioread32((chip)->rtsx->remap_addr + reg)
-#define rtsx_writew(chip, reg, value) \
- iowrite16(value, (chip)->rtsx->remap_addr + reg)
-#define rtsx_readw(chip, reg) \
- ioread16((chip)->rtsx->remap_addr + reg)
-#define rtsx_writeb(chip, reg, value) \
- iowrite8(value, (chip)->rtsx->remap_addr + reg)
-#define rtsx_readb(chip, reg) \
- ioread8((chip)->rtsx->remap_addr + reg)
-
-#define rtsx_read_config_byte(chip, where, val) \
- pci_read_config_byte((chip)->rtsx->pci, where, val)
-
-#define rtsx_write_config_byte(chip, where, val) \
- pci_write_config_byte((chip)->rtsx->pci, where, val)
-
-#define wait_timeout_x(task_state, msecs) \
-do { \
- set_current_state((task_state)); \
- schedule_timeout((msecs) * HZ / 1000); \
-} while (0)
-#define wait_timeout(msecs) wait_timeout_x(TASK_INTERRUPTIBLE, (msecs))
-
-
-#define STATE_TRANS_NONE 0
-#define STATE_TRANS_CMD 1
-#define STATE_TRANS_BUF 2
-#define STATE_TRANS_SG 3
-
-#define TRANS_NOT_READY 0
-#define TRANS_RESULT_OK 1
-#define TRANS_RESULT_FAIL 2
-
-#define SCSI_LUN(srb) ((srb)->device->lun)
-
-typedef unsigned long DELAY_PARA_T;
-
-struct rtsx_chip;
-
-struct rtsx_dev {
- struct pci_dev *pci;
-
- /* pci resources */
- unsigned long addr;
- void __iomem *remap_addr;
- int irq;
-
- /* locks */
- spinlock_t reg_lock;
-
- struct task_struct *ctl_thread; /* the control thread */
- struct task_struct *polling_thread; /* the polling thread */
-
- /* mutual exclusion and synchronization structures */
- struct completion cmnd_ready; /* to sleep thread on */
- struct completion control_exit; /* control thread exit */
- struct completion polling_exit; /* polling thread exit */
- struct completion notify; /* thread begin/end */
- struct completion scanning_done; /* wait for scan thread */
-
- wait_queue_head_t delay_wait; /* wait during scan, reset */
- struct mutex dev_mutex;
-
- /* host reserved buffer */
- void *rtsx_resv_buf;
- dma_addr_t rtsx_resv_buf_addr;
-
- char trans_result;
- char trans_state;
-
- struct completion *done;
- /* Whether interrupt handler should care card cd info */
- u32 check_card_cd;
-
- struct rtsx_chip *chip;
-};
-
-typedef struct rtsx_dev rtsx_dev_t;
-
-/* Convert between rtsx_dev and the corresponding Scsi_Host */
-static inline struct Scsi_Host *rtsx_to_host(struct rtsx_dev *dev)
-{
- return container_of((void *) dev, struct Scsi_Host, hostdata);
-}
-static inline struct rtsx_dev *host_to_rtsx(struct Scsi_Host *host)
-{
- return (struct rtsx_dev *) host->hostdata;
-}
-
-static inline void get_current_time(u8 *timeval_buf, int buf_len)
-{
- struct timeval tv;
-
- if (!timeval_buf || (buf_len < 8))
- return;
-
- do_gettimeofday(&tv);
-
- timeval_buf[0] = (u8)(tv.tv_sec >> 24);
- timeval_buf[1] = (u8)(tv.tv_sec >> 16);
- timeval_buf[2] = (u8)(tv.tv_sec >> 8);
- timeval_buf[3] = (u8)(tv.tv_sec);
- timeval_buf[4] = (u8)(tv.tv_usec >> 24);
- timeval_buf[5] = (u8)(tv.tv_usec >> 16);
- timeval_buf[6] = (u8)(tv.tv_usec >> 8);
- timeval_buf[7] = (u8)(tv.tv_usec);
-}
-
-/* The scsi_lock() and scsi_unlock() macros protect the sm_state and the
- * single queue element srb for write access */
-#define scsi_unlock(host) spin_unlock_irq(host->host_lock)
-#define scsi_lock(host) spin_lock_irq(host->host_lock)
-
-#define lock_state(chip) spin_lock_irq(&((chip)->rtsx->reg_lock))
-#define unlock_state(chip) spin_unlock_irq(&((chip)->rtsx->reg_lock))
-
-/* struct scsi_cmnd transfer buffer access utilities */
-enum xfer_buf_dir {TO_XFER_BUF, FROM_XFER_BUF};
-
-int rtsx_read_pci_cfg_byte(u8 bus, u8 dev, u8 func, u8 offset, u8 *val);
-
-#endif /* __REALTEK_RTSX_H */
diff --git a/drivers/staging/rts_pstor/rtsx_card.c b/drivers/staging/rts_pstor/rtsx_card.c
deleted file mode 100644
index 539aa6a..0000000
--- a/drivers/staging/rts_pstor/rtsx_card.c
+++ /dev/null
@@ -1,1233 +0,0 @@
-/* Driver for Realtek PCI-Express card reader
- *
- * Copyright(c) 2009 Realtek Semiconductor Corp. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, see <http://www.gnu.org/licenses/>.
- *
- * Author:
- * wwang (wei_wang@realsil.com.cn)
- * No. 450, Shenhu Road, Suzhou Industry Park, Suzhou, China
- */
-
-#include <linux/blkdev.h>
-#include <linux/kthread.h>
-#include <linux/sched.h>
-#include <linux/workqueue.h>
-#include <linux/kernel.h>
-
-#include "rtsx.h"
-#include "rtsx_transport.h"
-#include "rtsx_scsi.h"
-#include "rtsx_card.h"
-
-#include "rtsx_sys.h"
-#include "general.h"
-
-#include "sd.h"
-#include "xd.h"
-#include "ms.h"
-
-void do_remaining_work(struct rtsx_chip *chip)
-{
- struct sd_info *sd_card = &(chip->sd_card);
-#ifdef XD_DELAY_WRITE
- struct xd_info *xd_card = &(chip->xd_card);
-#endif
- struct ms_info *ms_card = &(chip->ms_card);
-
- if (chip->card_ready & SD_CARD) {
- if (sd_card->seq_mode) {
- rtsx_set_stat(chip, RTSX_STAT_RUN);
- sd_card->cleanup_counter++;
- } else {
- sd_card->cleanup_counter = 0;
- }
- }
-
-#ifdef XD_DELAY_WRITE
- if (chip->card_ready & XD_CARD) {
- if (xd_card->delay_write.delay_write_flag) {
- rtsx_set_stat(chip, RTSX_STAT_RUN);
- xd_card->cleanup_counter++;
- } else {
- xd_card->cleanup_counter = 0;
- }
- }
-#endif
-
- if (chip->card_ready & MS_CARD) {
- if (CHK_MSPRO(ms_card)) {
- if (ms_card->seq_mode) {
- rtsx_set_stat(chip, RTSX_STAT_RUN);
- ms_card->cleanup_counter++;
- } else {
- ms_card->cleanup_counter = 0;
- }
- } else {
-#ifdef MS_DELAY_WRITE
- if (ms_card->delay_write.delay_write_flag) {
- rtsx_set_stat(chip, RTSX_STAT_RUN);
- ms_card->cleanup_counter++;
- } else {
- ms_card->cleanup_counter = 0;
- }
-#endif
- }
- }
-
- if (sd_card->cleanup_counter > POLLING_WAIT_CNT)
- sd_cleanup_work(chip);
-
- if (xd_card->cleanup_counter > POLLING_WAIT_CNT)
- xd_cleanup_work(chip);
-
- if (ms_card->cleanup_counter > POLLING_WAIT_CNT)
- ms_cleanup_work(chip);
-}
-
-void try_to_switch_sdio_ctrl(struct rtsx_chip *chip)
-{
- u8 reg1 = 0, reg2 = 0;
-
- rtsx_read_register(chip, 0xFF34, ®1);
- rtsx_read_register(chip, 0xFF38, ®2);
- RTSX_DEBUGP("reg 0xFF34: 0x%x, reg 0xFF38: 0x%x\n", reg1, reg2);
- if ((reg1 & 0xC0) && (reg2 & 0xC0)) {
- chip->sd_int = 1;
- rtsx_write_register(chip, SDIO_CTRL, 0xFF, SDIO_BUS_CTRL | SDIO_CD_CTRL);
- rtsx_write_register(chip, PWR_GATE_CTRL, LDO3318_PWR_MASK, LDO_ON);
- }
-}
-
-#ifdef SUPPORT_SDIO_ASPM
-void dynamic_configure_sdio_aspm(struct rtsx_chip *chip)
-{
- u8 buf[12], reg;
- int i;
-
- for (i = 0; i < 12; i++)
- rtsx_read_register(chip, 0xFF08 + i, &buf[i]);
- rtsx_read_register(chip, 0xFF25, ®);
- if ((memcmp(buf, chip->sdio_raw_data, 12) != 0) || (reg & 0x03)) {
- chip->sdio_counter = 0;
- chip->sdio_idle = 0;
- } else {
- if (!chip->sdio_idle) {
- chip->sdio_counter++;
- if (chip->sdio_counter >= SDIO_IDLE_COUNT) {
- chip->sdio_counter = 0;
- chip->sdio_idle = 1;
- }
- }
- }
- memcpy(chip->sdio_raw_data, buf, 12);
-
- if (chip->sdio_idle) {
- if (!chip->sdio_aspm) {
- RTSX_DEBUGP("SDIO enter ASPM!\n");
- rtsx_write_register(chip, ASPM_FORCE_CTL, 0xFC,
- 0x30 | (chip->aspm_level[1] << 2));
- chip->sdio_aspm = 1;
- }
- } else {
- if (chip->sdio_aspm) {
- RTSX_DEBUGP("SDIO exit ASPM!\n");
- rtsx_write_register(chip, ASPM_FORCE_CTL, 0xFC, 0x30);
- chip->sdio_aspm = 0;
- }
- }
-}
-#endif
-
-void do_reset_sd_card(struct rtsx_chip *chip)
-{
- int retval;
-
- RTSX_DEBUGP("%s: %d, card2lun = 0x%x\n", __func__,
- chip->sd_reset_counter, chip->card2lun[SD_CARD]);
-
- if (chip->card2lun[SD_CARD] >= MAX_ALLOWED_LUN_CNT) {
- clear_bit(SD_NR, &(chip->need_reset));
- chip->sd_reset_counter = 0;
- chip->sd_show_cnt = 0;
- return;
- }
-
- chip->rw_fail_cnt[chip->card2lun[SD_CARD]] = 0;
-
- rtsx_set_stat(chip, RTSX_STAT_RUN);
- rtsx_write_register(chip, SDIO_CTRL, 0xFF, 0);
-
- retval = reset_sd_card(chip);
- if (chip->need_release & SD_CARD)
- return;
- if (retval == STATUS_SUCCESS) {
- clear_bit(SD_NR, &(chip->need_reset));
- chip->sd_reset_counter = 0;
- chip->sd_show_cnt = 0;
- chip->card_ready |= SD_CARD;
- chip->card_fail &= ~SD_CARD;
- chip->rw_card[chip->card2lun[SD_CARD]] = sd_rw;
- } else {
- if (chip->sd_io || (chip->sd_reset_counter >= MAX_RESET_CNT)) {
- clear_bit(SD_NR, &(chip->need_reset));
- chip->sd_reset_counter = 0;
- chip->sd_show_cnt = 0;
- } else {
- chip->sd_reset_counter++;
- }
- chip->card_ready &= ~SD_CARD;
- chip->card_fail |= SD_CARD;
- chip->capacity[chip->card2lun[SD_CARD]] = 0;
- chip->rw_card[chip->card2lun[SD_CARD]] = NULL;
-
- rtsx_write_register(chip, CARD_OE, SD_OUTPUT_EN, 0);
- if (!chip->ft2_fast_mode)
- card_power_off(chip, SD_CARD);
- if (chip->sd_io) {
- chip->sd_int = 0;
- try_to_switch_sdio_ctrl(chip);
- } else {
- disable_card_clock(chip, SD_CARD);
- }
- }
-}
-
-void do_reset_xd_card(struct rtsx_chip *chip)
-{
- int retval;
-
- RTSX_DEBUGP("%s: %d, card2lun = 0x%x\n", __func__,
- chip->xd_reset_counter, chip->card2lun[XD_CARD]);
-
- if (chip->card2lun[XD_CARD] >= MAX_ALLOWED_LUN_CNT) {
- clear_bit(XD_NR, &(chip->need_reset));
- chip->xd_reset_counter = 0;
- chip->xd_show_cnt = 0;
- return;
- }
-
- chip->rw_fail_cnt[chip->card2lun[XD_CARD]] = 0;
-
- rtsx_set_stat(chip, RTSX_STAT_RUN);
- rtsx_write_register(chip, SDIO_CTRL, 0xFF, 0);
-
- retval = reset_xd_card(chip);
- if (chip->need_release & XD_CARD)
- return;
- if (retval == STATUS_SUCCESS) {
- clear_bit(XD_NR, &(chip->need_reset));
- chip->xd_reset_counter = 0;
- chip->card_ready |= XD_CARD;
- chip->card_fail &= ~XD_CARD;
- chip->rw_card[chip->card2lun[XD_CARD]] = xd_rw;
- } else {
- if (chip->xd_reset_counter >= MAX_RESET_CNT) {
- clear_bit(XD_NR, &(chip->need_reset));
- chip->xd_reset_counter = 0;
- chip->xd_show_cnt = 0;
- } else {
- chip->xd_reset_counter++;
- }
- chip->card_ready &= ~XD_CARD;
- chip->card_fail |= XD_CARD;
- chip->capacity[chip->card2lun[XD_CARD]] = 0;
- chip->rw_card[chip->card2lun[XD_CARD]] = NULL;
-
- rtsx_write_register(chip, CARD_OE, XD_OUTPUT_EN, 0);
- if (!chip->ft2_fast_mode)
- card_power_off(chip, XD_CARD);
- disable_card_clock(chip, XD_CARD);
- }
-}
-
-void do_reset_ms_card(struct rtsx_chip *chip)
-{
- int retval;
-
- RTSX_DEBUGP("%s: %d, card2lun = 0x%x\n", __func__,
- chip->ms_reset_counter, chip->card2lun[MS_CARD]);
-
- if (chip->card2lun[MS_CARD] >= MAX_ALLOWED_LUN_CNT) {
- clear_bit(MS_NR, &(chip->need_reset));
- chip->ms_reset_counter = 0;
- chip->ms_show_cnt = 0;
- return;
- }
-
- chip->rw_fail_cnt[chip->card2lun[MS_CARD]] = 0;
-
- rtsx_set_stat(chip, RTSX_STAT_RUN);
- rtsx_write_register(chip, SDIO_CTRL, 0xFF, 0);
-
- retval = reset_ms_card(chip);
- if (chip->need_release & MS_CARD)
- return;
- if (retval == STATUS_SUCCESS) {
- clear_bit(MS_NR, &(chip->need_reset));
- chip->ms_reset_counter = 0;
- chip->card_ready |= MS_CARD;
- chip->card_fail &= ~MS_CARD;
- chip->rw_card[chip->card2lun[MS_CARD]] = ms_rw;
- } else {
- if (chip->ms_reset_counter >= MAX_RESET_CNT) {
- clear_bit(MS_NR, &(chip->need_reset));
- chip->ms_reset_counter = 0;
- chip->ms_show_cnt = 0;
- } else {
- chip->ms_reset_counter++;
- }
- chip->card_ready &= ~MS_CARD;
- chip->card_fail |= MS_CARD;
- chip->capacity[chip->card2lun[MS_CARD]] = 0;
- chip->rw_card[chip->card2lun[MS_CARD]] = NULL;
-
- rtsx_write_register(chip, CARD_OE, MS_OUTPUT_EN, 0);
- if (!chip->ft2_fast_mode)
- card_power_off(chip, MS_CARD);
- disable_card_clock(chip, MS_CARD);
- }
-}
-
-static void release_sdio(struct rtsx_chip *chip)
-{
- if (chip->sd_io) {
- rtsx_write_register(chip, CARD_STOP, SD_STOP | SD_CLR_ERR,
- SD_STOP | SD_CLR_ERR);
-
- if (chip->chip_insert_with_sdio) {
- chip->chip_insert_with_sdio = 0;
-
- if (CHECK_PID(chip, 0x5288))
- rtsx_write_register(chip, 0xFE5A, 0x08, 0x00);
- else
- rtsx_write_register(chip, 0xFE70, 0x80, 0x00);
- }
-
- rtsx_write_register(chip, SDIO_CTRL, SDIO_CD_CTRL, 0);
- chip->sd_io = 0;
- }
-}
-
-void rtsx_power_off_card(struct rtsx_chip *chip)
-{
- if ((chip->card_ready & SD_CARD) || chip->sd_io) {
- sd_cleanup_work(chip);
- sd_power_off_card3v3(chip);
- }
-
- if (chip->card_ready & XD_CARD) {
- xd_cleanup_work(chip);
- xd_power_off_card3v3(chip);
- }
-
- if (chip->card_ready & MS_CARD) {
- ms_cleanup_work(chip);
- ms_power_off_card3v3(chip);
- }
-}
-
-void rtsx_release_cards(struct rtsx_chip *chip)
-{
- chip->int_reg = rtsx_readl(chip, RTSX_BIPR);
-
- if ((chip->card_ready & SD_CARD) || chip->sd_io) {
- if (chip->int_reg & SD_EXIST)
- sd_cleanup_work(chip);
- release_sd_card(chip);
- }
-
- if (chip->card_ready & XD_CARD) {
- if (chip->int_reg & XD_EXIST)
- xd_cleanup_work(chip);
- release_xd_card(chip);
- }
-
- if (chip->card_ready & MS_CARD) {
- if (chip->int_reg & MS_EXIST)
- ms_cleanup_work(chip);
- release_ms_card(chip);
- }
-}
-
-void rtsx_reset_cards(struct rtsx_chip *chip)
-{
- if (!chip->need_reset)
- return;
-
- rtsx_set_stat(chip, RTSX_STAT_RUN);
-
- rtsx_force_power_on(chip, SSC_PDCTL | OC_PDCTL);
-
- rtsx_disable_aspm(chip);
-
- if ((chip->need_reset & SD_CARD) && chip->chip_insert_with_sdio)
- clear_bit(SD_NR, &(chip->need_reset));
-
- if (chip->need_reset & XD_CARD) {
- chip->card_exist |= XD_CARD;
-
- if (chip->xd_show_cnt >= MAX_SHOW_CNT)
- do_reset_xd_card(chip);
- else
- chip->xd_show_cnt++;
- }
- if (CHECK_PID(chip, 0x5288) && CHECK_BARO_PKG(chip, QFN)) {
- if (chip->card_exist & XD_CARD) {
- clear_bit(SD_NR, &(chip->need_reset));
- clear_bit(MS_NR, &(chip->need_reset));
- }
- }
- if (chip->need_reset & SD_CARD) {
- chip->card_exist |= SD_CARD;
-
- if (chip->sd_show_cnt >= MAX_SHOW_CNT) {
- rtsx_write_register(chip, RBCTL, RB_FLUSH, RB_FLUSH);
- do_reset_sd_card(chip);
- } else {
- chip->sd_show_cnt++;
- }
- }
- if (chip->need_reset & MS_CARD) {
- chip->card_exist |= MS_CARD;
-
- if (chip->ms_show_cnt >= MAX_SHOW_CNT)
- do_reset_ms_card(chip);
- else
- chip->ms_show_cnt++;
- }
-}
-
-void rtsx_reinit_cards(struct rtsx_chip *chip, int reset_chip)
-{
- rtsx_set_stat(chip, RTSX_STAT_RUN);
-
- rtsx_force_power_on(chip, SSC_PDCTL | OC_PDCTL);
-
- if (reset_chip)
- rtsx_reset_chip(chip);
-
- chip->int_reg = rtsx_readl(chip, RTSX_BIPR);
-
- if ((chip->int_reg & SD_EXIST) && (chip->need_reinit & SD_CARD)) {
- release_sdio(chip);
- release_sd_card(chip);
-
- wait_timeout(100);
-
- chip->card_exist |= SD_CARD;
- do_reset_sd_card(chip);
- }
-
- if ((chip->int_reg & XD_EXIST) && (chip->need_reinit & XD_CARD)) {
- release_xd_card(chip);
-
- wait_timeout(100);
-
- chip->card_exist |= XD_CARD;
- do_reset_xd_card(chip);
- }
-
- if ((chip->int_reg & MS_EXIST) && (chip->need_reinit & MS_CARD)) {
- release_ms_card(chip);
-
- wait_timeout(100);
-
- chip->card_exist |= MS_CARD;
- do_reset_ms_card(chip);
- }
-
- chip->need_reinit = 0;
-}
-
-#ifdef DISABLE_CARD_INT
-void card_cd_debounce(struct rtsx_chip *chip, unsigned long *need_reset, unsigned long *need_release)
-{
- u8 release_map = 0, reset_map = 0;
-
- chip->int_reg = rtsx_readl(chip, RTSX_BIPR);
-
- if (chip->card_exist) {
- if (chip->card_exist & XD_CARD) {
- if (!(chip->int_reg & XD_EXIST))
- release_map |= XD_CARD;
- } else if (chip->card_exist & SD_CARD) {
- if (!(chip->int_reg & SD_EXIST))
- release_map |= SD_CARD;
- } else if (chip->card_exist & MS_CARD) {
- if (!(chip->int_reg & MS_EXIST))
- release_map |= MS_CARD;
- }
- } else {
- if (chip->int_reg & XD_EXIST)
- reset_map |= XD_CARD;
- else if (chip->int_reg & SD_EXIST)
- reset_map |= SD_CARD;
- else if (chip->int_reg & MS_EXIST)
- reset_map |= MS_CARD;
- }
-
- if (reset_map) {
- int xd_cnt = 0, sd_cnt = 0, ms_cnt = 0;
- int i;
-
- for (i = 0; i < (DEBOUNCE_CNT); i++) {
- chip->int_reg = rtsx_readl(chip, RTSX_BIPR);
-
- if (chip->int_reg & XD_EXIST)
- xd_cnt++;
- else
- xd_cnt = 0;
-
- if (chip->int_reg & SD_EXIST)
- sd_cnt++;
- else
- sd_cnt = 0;
-
- if (chip->int_reg & MS_EXIST)
- ms_cnt++;
- else
- ms_cnt = 0;
-
- wait_timeout(30);
- }
-
- reset_map = 0;
- if (!(chip->card_exist & XD_CARD) && (xd_cnt > (DEBOUNCE_CNT-1)))
- reset_map |= XD_CARD;
- if (!(chip->card_exist & SD_CARD) && (sd_cnt > (DEBOUNCE_CNT-1)))
- reset_map |= SD_CARD;
- if (!(chip->card_exist & MS_CARD) && (ms_cnt > (DEBOUNCE_CNT-1)))
- reset_map |= MS_CARD;
- }
-
- if (CHECK_PID(chip, 0x5288) && CHECK_BARO_PKG(chip, QFN))
- rtsx_write_register(chip, HOST_SLEEP_STATE, 0xC0, 0x00);
-
- if (need_reset)
- *need_reset = reset_map;
- if (need_release)
- *need_release = release_map;
-}
-#endif
-
-void rtsx_init_cards(struct rtsx_chip *chip)
-{
- if (RTSX_TST_DELINK(chip) && (rtsx_get_stat(chip) != RTSX_STAT_SS)) {
- RTSX_DEBUGP("Reset chip in polling thread!\n");
- rtsx_reset_chip(chip);
- RTSX_CLR_DELINK(chip);
- }
-
-#ifdef DISABLE_CARD_INT
- card_cd_debounce(chip, &(chip->need_reset), &(chip->need_release));
-#endif
-
- if (chip->need_release) {
- if (CHECK_PID(chip, 0x5288) && CHECK_BARO_PKG(chip, QFN)) {
- if (chip->int_reg & XD_EXIST) {
- clear_bit(SD_NR, &(chip->need_release));
- clear_bit(MS_NR, &(chip->need_release));
- }
- }
-
- if (!(chip->card_exist & SD_CARD) && !chip->sd_io)
- clear_bit(SD_NR, &(chip->need_release));
- if (!(chip->card_exist & XD_CARD))
- clear_bit(XD_NR, &(chip->need_release));
- if (!(chip->card_exist & MS_CARD))
- clear_bit(MS_NR, &(chip->need_release));
-
- RTSX_DEBUGP("chip->need_release = 0x%x\n", (unsigned int)(chip->need_release));
-
-#ifdef SUPPORT_OCP
- if (chip->need_release) {
- if (CHECK_PID(chip, 0x5209)) {
- u8 mask = 0, val = 0;
- if (CHECK_LUN_MODE(chip, SD_MS_2LUN)) {
- if (chip->ocp_stat & (MS_OC_NOW | MS_OC_EVER)) {
- mask |= MS_OCP_INT_CLR | MS_OC_CLR;
- val |= MS_OCP_INT_CLR | MS_OC_CLR;
- }
- }
- if (chip->ocp_stat & (SD_OC_NOW | SD_OC_EVER)) {
- mask |= SD_OCP_INT_CLR | SD_OC_CLR;
- val |= SD_OCP_INT_CLR | SD_OC_CLR;
- }
- if (mask)
- rtsx_write_register(chip, OCPCTL, mask, val);
- } else {
- if (chip->ocp_stat & (CARD_OC_NOW | CARD_OC_EVER))
- rtsx_write_register(chip, OCPCLR,
- CARD_OC_INT_CLR | CARD_OC_CLR,
- CARD_OC_INT_CLR | CARD_OC_CLR);
- }
- chip->ocp_stat = 0;
- }
-#endif
- if (chip->need_release) {
- rtsx_set_stat(chip, RTSX_STAT_RUN);
- rtsx_force_power_on(chip, SSC_PDCTL | OC_PDCTL);
- }
-
- if (chip->need_release & SD_CARD) {
- clear_bit(SD_NR, &(chip->need_release));
- chip->card_exist &= ~SD_CARD;
- chip->card_ejected &= ~SD_CARD;
- chip->card_fail &= ~SD_CARD;
- CLR_BIT(chip->lun_mc, chip->card2lun[SD_CARD]);
- chip->rw_fail_cnt[chip->card2lun[SD_CARD]] = 0;
- rtsx_write_register(chip, RBCTL, RB_FLUSH, RB_FLUSH);
-
- release_sdio(chip);
- release_sd_card(chip);
- }
-
- if (chip->need_release & XD_CARD) {
- clear_bit(XD_NR, &(chip->need_release));
- chip->card_exist &= ~XD_CARD;
- chip->card_ejected &= ~XD_CARD;
- chip->card_fail &= ~XD_CARD;
- CLR_BIT(chip->lun_mc, chip->card2lun[XD_CARD]);
- chip->rw_fail_cnt[chip->card2lun[XD_CARD]] = 0;
-
- release_xd_card(chip);
-
- if (CHECK_PID(chip, 0x5288) && CHECK_BARO_PKG(chip, QFN))
- rtsx_write_register(chip, HOST_SLEEP_STATE, 0xC0, 0xC0);
- }
-
- if (chip->need_release & MS_CARD) {
- clear_bit(MS_NR, &(chip->need_release));
- chip->card_exist &= ~MS_CARD;
- chip->card_ejected &= ~MS_CARD;
- chip->card_fail &= ~MS_CARD;
- CLR_BIT(chip->lun_mc, chip->card2lun[MS_CARD]);
- chip->rw_fail_cnt[chip->card2lun[MS_CARD]] = 0;
-
- release_ms_card(chip);
- }
-
- RTSX_DEBUGP("chip->card_exist = 0x%x\n", chip->card_exist);
-
- if (!chip->card_exist)
- turn_off_led(chip, LED_GPIO);
- }
-
- if (chip->need_reset) {
- RTSX_DEBUGP("chip->need_reset = 0x%x\n", (unsigned int)(chip->need_reset));
-
- rtsx_reset_cards(chip);
- }
-
- if (chip->need_reinit) {
- RTSX_DEBUGP("chip->need_reinit = 0x%x\n", (unsigned int)(chip->need_reinit));
-
- rtsx_reinit_cards(chip, 0);
- }
-}
-
-static inline u8 double_depth(u8 depth)
-{
- return ((depth > 1) ? (depth - 1) : depth);
-}
-
-int switch_ssc_clock(struct rtsx_chip *chip, int clk)
-{
- struct sd_info *sd_card = &(chip->sd_card);
- struct ms_info *ms_card = &(chip->ms_card);
- int retval;
- u8 N = (u8)(clk - 2), min_N, max_N;
- u8 mcu_cnt, div, max_div, ssc_depth, ssc_depth_mask;
- int sd_vpclk_phase_reset = 0;
-
- if (chip->cur_clk == clk)
- return STATUS_SUCCESS;
-
- if (CHECK_PID(chip, 0x5209)) {
- min_N = 80;
- max_N = 208;
- max_div = CLK_DIV_8;
- } else {
- min_N = 60;
- max_N = 120;
- max_div = CLK_DIV_4;
- }
-
- if (CHECK_PID(chip, 0x5209) && (chip->cur_card == SD_CARD)) {
- struct sd_info *sd_card = &(chip->sd_card);
- if (CHK_SD30_SPEED(sd_card) || CHK_MMC_DDR52(sd_card))
- sd_vpclk_phase_reset = 1;
- }
-
- RTSX_DEBUGP("Switch SSC clock to %dMHz (cur_clk = %d)\n", clk, chip->cur_clk);
-
- if ((clk <= 2) || (N > max_N))
- TRACE_RET(chip, STATUS_FAIL);
-
- mcu_cnt = (u8)(125/clk + 3);
- if (CHECK_PID(chip, 0x5209)) {
- if (mcu_cnt > 15)
- mcu_cnt = 15;
- } else {
- if (mcu_cnt > 7)
- mcu_cnt = 7;
- }
-
- div = CLK_DIV_1;
- while ((N < min_N) && (div < max_div)) {
- N = (N + 2) * 2 - 2;
- div++;
- }
- RTSX_DEBUGP("N = %d, div = %d\n", N, div);
-
- if (chip->ssc_en) {
- if (CHECK_PID(chip, 0x5209)) {
- if (chip->cur_card == SD_CARD) {
- if (CHK_SD_SDR104(sd_card))
- ssc_depth = chip->ssc_depth_sd_sdr104;
- else if (CHK_SD_SDR50(sd_card))
- ssc_depth = chip->ssc_depth_sd_sdr50;
- else if (CHK_SD_DDR50(sd_card))
- ssc_depth = double_depth(chip->ssc_depth_sd_ddr50);
- else if (CHK_SD_HS(sd_card))
- ssc_depth = double_depth(chip->ssc_depth_sd_hs);
- else if (CHK_MMC_52M(sd_card) || CHK_MMC_DDR52(sd_card))
- ssc_depth = double_depth(chip->ssc_depth_mmc_52m);
- else
- ssc_depth = double_depth(chip->ssc_depth_low_speed);
- } else if (chip->cur_card == MS_CARD) {
- if (CHK_MSPRO(ms_card)) {
- if (CHK_HG8BIT(ms_card))
- ssc_depth = double_depth(chip->ssc_depth_ms_hg);
- else
- ssc_depth = double_depth(chip->ssc_depth_ms_4bit);
- } else {
- if (CHK_MS4BIT(ms_card))
- ssc_depth = double_depth(chip->ssc_depth_ms_4bit);
- else
- ssc_depth = double_depth(chip->ssc_depth_low_speed);
- }
- } else {
- ssc_depth = double_depth(chip->ssc_depth_low_speed);
- }
-
- if (ssc_depth) {
- if (div == CLK_DIV_2) {
- if (ssc_depth > 1)
- ssc_depth -= 1;
- else
- ssc_depth = SSC_DEPTH_4M;
-
- } else if (div == CLK_DIV_4) {
- if (ssc_depth > 2)
- ssc_depth -= 2;
- else
- ssc_depth = SSC_DEPTH_4M;
-
- } else if (div == CLK_DIV_8) {
- if (ssc_depth > 3)
- ssc_depth -= 3;
- else
- ssc_depth = SSC_DEPTH_4M;
-
- }
- }
- } else {
- ssc_depth = 0x01;
- N -= 2;
- }
- } else {
- ssc_depth = 0;
- }
-
- if (CHECK_PID(chip, 0x5209))
- ssc_depth_mask = SSC_DEPTH_MASK;
- else
- ssc_depth_mask = 0x03;
-
- RTSX_DEBUGP("ssc_depth = %d\n", ssc_depth);
-
- rtsx_init_cmd(chip);
- rtsx_add_cmd(chip, WRITE_REG_CMD, CLK_CTL, CLK_LOW_FREQ, CLK_LOW_FREQ);
- rtsx_add_cmd(chip, WRITE_REG_CMD, CLK_DIV, 0xFF, (div << 4) | mcu_cnt);
- rtsx_add_cmd(chip, WRITE_REG_CMD, SSC_CTL1, SSC_RSTB, 0);
- rtsx_add_cmd(chip, WRITE_REG_CMD, SSC_CTL2, ssc_depth_mask, ssc_depth);
- rtsx_add_cmd(chip, WRITE_REG_CMD, SSC_DIV_N_0, 0xFF, N);
- rtsx_add_cmd(chip, WRITE_REG_CMD, SSC_CTL1, SSC_RSTB, SSC_RSTB);
- if (sd_vpclk_phase_reset) {
- rtsx_add_cmd(chip, WRITE_REG_CMD, SD_VPCLK0_CTL, PHASE_NOT_RESET, 0);
- rtsx_add_cmd(chip, WRITE_REG_CMD, SD_VPCLK0_CTL, PHASE_NOT_RESET, PHASE_NOT_RESET);
- }
-
- retval = rtsx_send_cmd(chip, 0, WAIT_TIME);
- if (retval < 0)
- TRACE_RET(chip, STATUS_ERROR);
-
- udelay(10);
- RTSX_WRITE_REG(chip, CLK_CTL, CLK_LOW_FREQ, 0);
-
- chip->cur_clk = clk;
-
- return STATUS_SUCCESS;
-}
-
-int switch_normal_clock(struct rtsx_chip *chip, int clk)
-{
- u8 sel, div, mcu_cnt;
- int sd_vpclk_phase_reset = 0;
-
- if (chip->cur_clk == clk)
- return STATUS_SUCCESS;
-
- if (CHECK_PID(chip, 0x5209) && (chip->cur_card == SD_CARD)) {
- struct sd_info *sd_card = &(chip->sd_card);
- if (CHK_SD30_SPEED(sd_card) || CHK_MMC_DDR52(sd_card))
- sd_vpclk_phase_reset = 1;
- }
-
- switch (clk) {
- case CLK_20:
- RTSX_DEBUGP("Switch clock to 20MHz\n");
- sel = SSC_80;
- div = CLK_DIV_4;
- mcu_cnt = 7;
- break;
-
- case CLK_30:
- RTSX_DEBUGP("Switch clock to 30MHz\n");
- sel = SSC_120;
- div = CLK_DIV_4;
- mcu_cnt = 7;
- break;
-
- case CLK_40:
- RTSX_DEBUGP("Switch clock to 40MHz\n");
- sel = SSC_80;
- div = CLK_DIV_2;
- mcu_cnt = 7;
- break;
-
- case CLK_50:
- RTSX_DEBUGP("Switch clock to 50MHz\n");
- sel = SSC_100;
- div = CLK_DIV_2;
- mcu_cnt = 6;
- break;
-
- case CLK_60:
- RTSX_DEBUGP("Switch clock to 60MHz\n");
- sel = SSC_120;
- div = CLK_DIV_2;
- mcu_cnt = 6;
- break;
-
- case CLK_80:
- RTSX_DEBUGP("Switch clock to 80MHz\n");
- sel = SSC_80;
- div = CLK_DIV_1;
- mcu_cnt = 5;
- break;
-
- case CLK_100:
- RTSX_DEBUGP("Switch clock to 100MHz\n");
- sel = SSC_100;
- div = CLK_DIV_1;
- mcu_cnt = 5;
- break;
-
- case CLK_120:
- RTSX_DEBUGP("Switch clock to 120MHz\n");
- sel = SSC_120;
- div = CLK_DIV_1;
- mcu_cnt = 5;
- break;
-
- case CLK_150:
- RTSX_DEBUGP("Switch clock to 150MHz\n");
- sel = SSC_150;
- div = CLK_DIV_1;
- mcu_cnt = 4;
- break;
-
- case CLK_200:
- RTSX_DEBUGP("Switch clock to 200MHz\n");
- sel = SSC_200;
- div = CLK_DIV_1;
- mcu_cnt = 4;
- break;
-
- default:
- RTSX_DEBUGP("Try to switch to an illegal clock (%d)\n", clk);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- RTSX_WRITE_REG(chip, CLK_CTL, 0xFF, CLK_LOW_FREQ);
- if (sd_vpclk_phase_reset) {
- RTSX_WRITE_REG(chip, SD_VPCLK0_CTL, PHASE_NOT_RESET, 0);
- RTSX_WRITE_REG(chip, SD_VPCLK1_CTL, PHASE_NOT_RESET, 0);
- }
- RTSX_WRITE_REG(chip, CLK_DIV, 0xFF, (div << 4) | mcu_cnt);
- RTSX_WRITE_REG(chip, CLK_SEL, 0xFF, sel);
-
- if (sd_vpclk_phase_reset) {
- udelay(200);
- RTSX_WRITE_REG(chip, SD_VPCLK0_CTL, PHASE_NOT_RESET, PHASE_NOT_RESET);
- RTSX_WRITE_REG(chip, SD_VPCLK1_CTL, PHASE_NOT_RESET, PHASE_NOT_RESET);
- udelay(200);
- }
- RTSX_WRITE_REG(chip, CLK_CTL, 0xFF, 0);
-
- chip->cur_clk = clk;
-
- return STATUS_SUCCESS;
-}
-
-void trans_dma_enable(enum dma_data_direction dir, struct rtsx_chip *chip, u32 byte_cnt, u8 pack_size)
-{
- if (pack_size > DMA_1024)
- pack_size = DMA_512;
-
- rtsx_add_cmd(chip, WRITE_REG_CMD, IRQSTAT0, DMA_DONE_INT, DMA_DONE_INT);
-
- rtsx_add_cmd(chip, WRITE_REG_CMD, DMATC3, 0xFF, (u8)(byte_cnt >> 24));
- rtsx_add_cmd(chip, WRITE_REG_CMD, DMATC2, 0xFF, (u8)(byte_cnt >> 16));
- rtsx_add_cmd(chip, WRITE_REG_CMD, DMATC1, 0xFF, (u8)(byte_cnt >> 8));
- rtsx_add_cmd(chip, WRITE_REG_CMD, DMATC0, 0xFF, (u8)byte_cnt);
-
- if (dir == DMA_FROM_DEVICE) {
- rtsx_add_cmd(chip, WRITE_REG_CMD, DMACTL, 0x03 | DMA_PACK_SIZE_MASK,
- DMA_DIR_FROM_CARD | DMA_EN | pack_size);
- } else {
- rtsx_add_cmd(chip, WRITE_REG_CMD, DMACTL, 0x03 | DMA_PACK_SIZE_MASK,
- DMA_DIR_TO_CARD | DMA_EN | pack_size);
- }
-
- rtsx_add_cmd(chip, WRITE_REG_CMD, CARD_DATA_SOURCE, 0x01, RING_BUFFER);
-}
-
-int enable_card_clock(struct rtsx_chip *chip, u8 card)
-{
- u8 clk_en = 0;
-
- if (card & XD_CARD)
- clk_en |= XD_CLK_EN;
- if (card & SD_CARD)
- clk_en |= SD_CLK_EN;
- if (card & MS_CARD)
- clk_en |= MS_CLK_EN;
-
- RTSX_WRITE_REG(chip, CARD_CLK_EN, clk_en, clk_en);
-
- return STATUS_SUCCESS;
-}
-
-int disable_card_clock(struct rtsx_chip *chip, u8 card)
-{
- u8 clk_en = 0;
-
- if (card & XD_CARD)
- clk_en |= XD_CLK_EN;
- if (card & SD_CARD)
- clk_en |= SD_CLK_EN;
- if (card & MS_CARD)
- clk_en |= MS_CLK_EN;
-
- RTSX_WRITE_REG(chip, CARD_CLK_EN, clk_en, 0);
-
- return STATUS_SUCCESS;
-}
-
-int card_power_on(struct rtsx_chip *chip, u8 card)
-{
- int retval;
- u8 mask, val1, val2;
-
- if (CHECK_LUN_MODE(chip, SD_MS_2LUN) && (card == MS_CARD)) {
- mask = MS_POWER_MASK;
- val1 = MS_PARTIAL_POWER_ON;
- val2 = MS_POWER_ON;
- } else {
- mask = SD_POWER_MASK;
- val1 = SD_PARTIAL_POWER_ON;
- val2 = SD_POWER_ON;
- }
-
- rtsx_init_cmd(chip);
- rtsx_add_cmd(chip, WRITE_REG_CMD, CARD_PWR_CTL, mask, val1);
- if (CHECK_PID(chip, 0x5209) && (card == SD_CARD))
- rtsx_add_cmd(chip, WRITE_REG_CMD, PWR_GATE_CTRL, LDO3318_PWR_MASK, LDO_SUSPEND);
-
- retval = rtsx_send_cmd(chip, 0, 100);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- udelay(chip->pmos_pwr_on_interval);
-
- rtsx_init_cmd(chip);
- rtsx_add_cmd(chip, WRITE_REG_CMD, CARD_PWR_CTL, mask, val2);
- if (CHECK_PID(chip, 0x5209) && (card == SD_CARD))
- rtsx_add_cmd(chip, WRITE_REG_CMD, PWR_GATE_CTRL, LDO3318_PWR_MASK, LDO_ON);
-
- retval = rtsx_send_cmd(chip, 0, 100);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- return STATUS_SUCCESS;
-}
-
-int card_power_off(struct rtsx_chip *chip, u8 card)
-{
- u8 mask, val;
-
- if (CHECK_LUN_MODE(chip, SD_MS_2LUN) && (card == MS_CARD)) {
- mask = MS_POWER_MASK;
- val = MS_POWER_OFF;
- } else {
- mask = SD_POWER_MASK;
- val = SD_POWER_OFF;
- }
- if (CHECK_PID(chip, 0x5209)) {
- mask |= PMOS_STRG_MASK;
- val |= PMOS_STRG_400mA;
- }
-
- RTSX_WRITE_REG(chip, CARD_PWR_CTL, mask, val);
- if (CHECK_PID(chip, 0x5209) && (card == SD_CARD))
- RTSX_WRITE_REG(chip, PWR_GATE_CTRL, LDO3318_PWR_MASK, LDO_OFF);
-
- return STATUS_SUCCESS;
-}
-
-int card_rw(struct scsi_cmnd *srb, struct rtsx_chip *chip, u32 sec_addr, u16 sec_cnt)
-{
- int retval;
- unsigned int lun = SCSI_LUN(srb);
- int i;
-
- if (chip->rw_card[lun] == NULL)
- TRACE_RET(chip, STATUS_FAIL);
-
- for (i = 0; i < 3; i++) {
- chip->rw_need_retry = 0;
-
- retval = chip->rw_card[lun](srb, chip, sec_addr, sec_cnt);
- if (retval != STATUS_SUCCESS) {
- if (rtsx_check_chip_exist(chip) != STATUS_SUCCESS) {
- rtsx_release_chip(chip);
- TRACE_RET(chip, STATUS_FAIL);
- }
- if (detect_card_cd(chip, chip->cur_card) != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- if (!chip->rw_need_retry) {
- RTSX_DEBUGP("RW fail, but no need to retry\n");
- break;
- }
- } else {
- chip->rw_need_retry = 0;
- break;
- }
-
- RTSX_DEBUGP("Retry RW, (i = %d)\n", i);
- }
-
- return retval;
-}
-
-int card_share_mode(struct rtsx_chip *chip, int card)
-{
- u8 mask, value;
-
- if (CHECK_PID(chip, 0x5209) || CHECK_PID(chip, 0x5208)) {
- mask = CARD_SHARE_MASK;
- if (card == SD_CARD)
- value = CARD_SHARE_48_SD;
- else if (card == MS_CARD)
- value = CARD_SHARE_48_MS;
- else if (card == XD_CARD)
- value = CARD_SHARE_48_XD;
- else
- TRACE_RET(chip, STATUS_FAIL);
-
- } else if (CHECK_PID(chip, 0x5288)) {
- mask = 0x03;
- if (card == SD_CARD)
- value = CARD_SHARE_BAROSSA_SD;
- else if (card == MS_CARD)
- value = CARD_SHARE_BAROSSA_MS;
- else if (card == XD_CARD)
- value = CARD_SHARE_BAROSSA_XD;
- else
- TRACE_RET(chip, STATUS_FAIL);
-
- } else {
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- RTSX_WRITE_REG(chip, CARD_SHARE_MODE, mask, value);
-
- return STATUS_SUCCESS;
-}
-
-
-int select_card(struct rtsx_chip *chip, int card)
-{
- int retval;
-
- if (chip->cur_card != card) {
- u8 mod;
-
- if (card == SD_CARD)
- mod = SD_MOD_SEL;
- else if (card == MS_CARD)
- mod = MS_MOD_SEL;
- else if (card == XD_CARD)
- mod = XD_MOD_SEL;
- else if (card == SPI_CARD)
- mod = SPI_MOD_SEL;
- else
- TRACE_RET(chip, STATUS_FAIL);
-
- RTSX_WRITE_REG(chip, CARD_SELECT, 0x07, mod);
- chip->cur_card = card;
-
- retval = card_share_mode(chip, card);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- return STATUS_SUCCESS;
-}
-
-void toggle_gpio(struct rtsx_chip *chip, u8 gpio)
-{
- u8 temp_reg;
-
- rtsx_read_register(chip, CARD_GPIO, &temp_reg);
- temp_reg ^= (0x01 << gpio);
- rtsx_write_register(chip, CARD_GPIO, 0xFF, temp_reg);
-}
-
-void turn_on_led(struct rtsx_chip *chip, u8 gpio)
-{
- if (CHECK_PID(chip, 0x5288))
- rtsx_write_register(chip, CARD_GPIO, (u8)(1 << gpio), (u8)(1 << gpio));
- else
- rtsx_write_register(chip, CARD_GPIO, (u8)(1 << gpio), 0);
-}
-
-void turn_off_led(struct rtsx_chip *chip, u8 gpio)
-{
- if (CHECK_PID(chip, 0x5288))
- rtsx_write_register(chip, CARD_GPIO, (u8)(1 << gpio), 0);
- else
- rtsx_write_register(chip, CARD_GPIO, (u8)(1 << gpio), (u8)(1 << gpio));
-}
-
-int detect_card_cd(struct rtsx_chip *chip, int card)
-{
- u32 card_cd, status;
-
- if (card == SD_CARD) {
- card_cd = SD_EXIST;
- } else if (card == MS_CARD) {
- card_cd = MS_EXIST;
- } else if (card == XD_CARD) {
- card_cd = XD_EXIST;
- } else {
- RTSX_DEBUGP("Wrong card type: 0x%x\n", card);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- status = rtsx_readl(chip, RTSX_BIPR);
- if (!(status & card_cd))
- TRACE_RET(chip, STATUS_FAIL);
-
- return STATUS_SUCCESS;
-}
-
-int check_card_exist(struct rtsx_chip *chip, unsigned int lun)
-{
- if (chip->card_exist & chip->lun2card[lun])
- return 1;
-
- return 0;
-}
-
-int check_card_ready(struct rtsx_chip *chip, unsigned int lun)
-{
- if (chip->card_ready & chip->lun2card[lun])
- return 1;
-
- return 0;
-}
-
-int check_card_wp(struct rtsx_chip *chip, unsigned int lun)
-{
- if (chip->card_wp & chip->lun2card[lun])
- return 1;
-
- return 0;
-}
-
-int check_card_fail(struct rtsx_chip *chip, unsigned int lun)
-{
- if (chip->card_fail & chip->lun2card[lun])
- return 1;
-
- return 0;
-}
-
-int check_card_ejected(struct rtsx_chip *chip, unsigned int lun)
-{
- if (chip->card_ejected & chip->lun2card[lun])
- return 1;
-
- return 0;
-}
-
-u8 get_lun_card(struct rtsx_chip *chip, unsigned int lun)
-{
- if ((chip->card_ready & chip->lun2card[lun]) == XD_CARD)
- return (u8)XD_CARD;
- else if ((chip->card_ready & chip->lun2card[lun]) == SD_CARD)
- return (u8)SD_CARD;
- else if ((chip->card_ready & chip->lun2card[lun]) == MS_CARD)
- return (u8)MS_CARD;
-
- return 0;
-}
-
-void eject_card(struct rtsx_chip *chip, unsigned int lun)
-{
- do_remaining_work(chip);
-
- if ((chip->card_ready & chip->lun2card[lun]) == SD_CARD) {
- release_sd_card(chip);
- chip->card_ejected |= SD_CARD;
- chip->card_ready &= ~SD_CARD;
- chip->capacity[lun] = 0;
- } else if ((chip->card_ready & chip->lun2card[lun]) == XD_CARD) {
- release_xd_card(chip);
- chip->card_ejected |= XD_CARD;
- chip->card_ready &= ~XD_CARD;
- chip->capacity[lun] = 0;
- } else if ((chip->card_ready & chip->lun2card[lun]) == MS_CARD) {
- release_ms_card(chip);
- chip->card_ejected |= MS_CARD;
- chip->card_ready &= ~MS_CARD;
- chip->capacity[lun] = 0;
- }
-}
diff --git a/drivers/staging/rts_pstor/rtsx_card.h b/drivers/staging/rts_pstor/rtsx_card.h
deleted file mode 100644
index 3f72776..0000000
--- a/drivers/staging/rts_pstor/rtsx_card.h
+++ /dev/null
@@ -1,1093 +0,0 @@
-/* Driver for Realtek PCI-Express card reader
- * Header file
- *
- * Copyright(c) 2009 Realtek Semiconductor Corp. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, see <http://www.gnu.org/licenses/>.
- *
- * Author:
- * wwang (wei_wang@realsil.com.cn)
- * No. 450, Shenhu Road, Suzhou Industry Park, Suzhou, China
- */
-
-#ifndef __REALTEK_RTSX_CARD_H
-#define __REALTEK_RTSX_CARD_H
-
-#include "debug.h"
-#include "rtsx.h"
-#include "rtsx_chip.h"
-#include "rtsx_transport.h"
-#include "sd.h"
-
-#define SSC_POWER_DOWN 0x01
-#define SD_OC_POWER_DOWN 0x02
-#define MS_OC_POWER_DOWN 0x04
-#define ALL_POWER_DOWN 0x07
-#define OC_POWER_DOWN 0x06
-
-#define PMOS_STRG_MASK 0x10
-#define PMOS_STRG_800mA 0x10
-#define PMOS_STRG_400mA 0x00
-
-#define POWER_OFF 0x03
-#define PARTIAL_POWER_ON 0x01
-#define POWER_ON 0x00
-
-#define MS_POWER_OFF 0x0C
-#define MS_PARTIAL_POWER_ON 0x04
-#define MS_POWER_ON 0x00
-#define MS_POWER_MASK 0x0C
-
-#define SD_POWER_OFF 0x03
-#define SD_PARTIAL_POWER_ON 0x01
-#define SD_POWER_ON 0x00
-#define SD_POWER_MASK 0x03
-
-#define XD_OUTPUT_EN 0x02
-#define SD_OUTPUT_EN 0x04
-#define MS_OUTPUT_EN 0x08
-#define SPI_OUTPUT_EN 0x10
-
-#define CLK_LOW_FREQ 0x01
-
-#define CLK_DIV_1 0x01
-#define CLK_DIV_2 0x02
-#define CLK_DIV_4 0x03
-#define CLK_DIV_8 0x04
-
-#define SSC_80 0
-#define SSC_100 1
-#define SSC_120 2
-#define SSC_150 3
-#define SSC_200 4
-
-#define XD_CLK_EN 0x02
-#define SD_CLK_EN 0x04
-#define MS_CLK_EN 0x08
-#define SPI_CLK_EN 0x10
-
-#define XD_MOD_SEL 1
-#define SD_MOD_SEL 2
-#define MS_MOD_SEL 3
-#define SPI_MOD_SEL 4
-
-#define CHANGE_CLK 0x01
-
-#define SD_CRC7_ERR 0x80
-#define SD_CRC16_ERR 0x40
-#define SD_CRC_WRITE_ERR 0x20
-#define SD_CRC_WRITE_ERR_MASK 0x1C
-#define GET_CRC_TIME_OUT 0x02
-#define SD_TUNING_COMPARE_ERR 0x01
-
-#define SD_RSP_80CLK_TIMEOUT 0x01
-
-#define SD_CLK_TOGGLE_EN 0x80
-#define SD_CLK_FORCE_STOP 0x40
-#define SD_DAT3_STATUS 0x10
-#define SD_DAT2_STATUS 0x08
-#define SD_DAT1_STATUS 0x04
-#define SD_DAT0_STATUS 0x02
-#define SD_CMD_STATUS 0x01
-
-#define SD_IO_USING_1V8 0x80
-#define SD_IO_USING_3V3 0x7F
-#define TYPE_A_DRIVING 0x00
-#define TYPE_B_DRIVING 0x01
-#define TYPE_C_DRIVING 0x02
-#define TYPE_D_DRIVING 0x03
-
-#define DDR_FIX_RX_DAT 0x00
-#define DDR_VAR_RX_DAT 0x80
-#define DDR_FIX_RX_DAT_EDGE 0x00
-#define DDR_FIX_RX_DAT_14_DELAY 0x40
-#define DDR_FIX_RX_CMD 0x00
-#define DDR_VAR_RX_CMD 0x20
-#define DDR_FIX_RX_CMD_POS_EDGE 0x00
-#define DDR_FIX_RX_CMD_14_DELAY 0x10
-#define SD20_RX_POS_EDGE 0x00
-#define SD20_RX_14_DELAY 0x08
-#define SD20_RX_SEL_MASK 0x08
-
-#define DDR_FIX_TX_CMD_DAT 0x00
-#define DDR_VAR_TX_CMD_DAT 0x80
-#define DDR_FIX_TX_DAT_14_TSU 0x00
-#define DDR_FIX_TX_DAT_12_TSU 0x40
-#define DDR_FIX_TX_CMD_NEG_EDGE 0x00
-#define DDR_FIX_TX_CMD_14_AHEAD 0x20
-#define SD20_TX_NEG_EDGE 0x00
-#define SD20_TX_14_AHEAD 0x10
-#define SD20_TX_SEL_MASK 0x10
-#define DDR_VAR_SDCLK_POL_SWAP 0x01
-
-#define SD_TRANSFER_START 0x80
-#define SD_TRANSFER_END 0x40
-#define SD_STAT_IDLE 0x20
-#define SD_TRANSFER_ERR 0x10
-#define SD_TM_NORMAL_WRITE 0x00
-#define SD_TM_AUTO_WRITE_3 0x01
-#define SD_TM_AUTO_WRITE_4 0x02
-#define SD_TM_AUTO_READ_3 0x05
-#define SD_TM_AUTO_READ_4 0x06
-#define SD_TM_CMD_RSP 0x08
-#define SD_TM_AUTO_WRITE_1 0x09
-#define SD_TM_AUTO_WRITE_2 0x0A
-#define SD_TM_NORMAL_READ 0x0C
-#define SD_TM_AUTO_READ_1 0x0D
-#define SD_TM_AUTO_READ_2 0x0E
-#define SD_TM_AUTO_TUNING 0x0F
-
-#define PHASE_CHANGE 0x80
-#define PHASE_NOT_RESET 0x40
-
-#define DCMPS_CHANGE 0x80
-#define DCMPS_CHANGE_DONE 0x40
-#define DCMPS_ERROR 0x20
-#define DCMPS_CURRENT_PHASE 0x1F
-
-#define SD_CLK_DIVIDE_0 0x00
-#define SD_CLK_DIVIDE_256 0xC0
-#define SD_CLK_DIVIDE_128 0x80
-#define SD_BUS_WIDTH_1 0x00
-#define SD_BUS_WIDTH_4 0x01
-#define SD_BUS_WIDTH_8 0x02
-#define SD_ASYNC_FIFO_NOT_RST 0x10
-#define SD_20_MODE 0x00
-#define SD_DDR_MODE 0x04
-#define SD_30_MODE 0x08
-
-#define SD_CLK_DIVIDE_MASK 0xC0
-
-#define SD_CMD_IDLE 0x80
-
-#define SD_DATA_IDLE 0x80
-
-#define DCM_RESET 0x08
-#define DCM_LOCKED 0x04
-#define DCM_208M 0x00
-#define DCM_TX 0x01
-#define DCM_RX 0x02
-
-#define DRP_START 0x80
-#define DRP_DONE 0x40
-
-#define DRP_WRITE 0x80
-#define DRP_READ 0x00
-#define DCM_WRITE_ADDRESS_50 0x50
-#define DCM_WRITE_ADDRESS_51 0x51
-#define DCM_READ_ADDRESS_00 0x00
-#define DCM_READ_ADDRESS_51 0x51
-
-#define SD_CALCULATE_CRC7 0x00
-#define SD_NO_CALCULATE_CRC7 0x80
-#define SD_CHECK_CRC16 0x00
-#define SD_NO_CHECK_CRC16 0x40
-#define SD_NO_CHECK_WAIT_CRC_TO 0x20
-#define SD_WAIT_BUSY_END 0x08
-#define SD_NO_WAIT_BUSY_END 0x00
-#define SD_CHECK_CRC7 0x00
-#define SD_NO_CHECK_CRC7 0x04
-#define SD_RSP_LEN_0 0x00
-#define SD_RSP_LEN_6 0x01
-#define SD_RSP_LEN_17 0x02
-#define SD_RSP_TYPE_R0 0x04
-#define SD_RSP_TYPE_R1 0x01
-#define SD_RSP_TYPE_R1b 0x09
-#define SD_RSP_TYPE_R2 0x02
-#define SD_RSP_TYPE_R3 0x05
-#define SD_RSP_TYPE_R4 0x05
-#define SD_RSP_TYPE_R5 0x01
-#define SD_RSP_TYPE_R6 0x01
-#define SD_RSP_TYPE_R7 0x01
-
-#define SD_RSP_80CLK_TIMEOUT_EN 0x01
-
-#define SAMPLE_TIME_RISING 0x00
-#define SAMPLE_TIME_FALLING 0x80
-#define PUSH_TIME_DEFAULT 0x00
-#define PUSH_TIME_ODD 0x40
-#define NO_EXTEND_TOGGLE 0x00
-#define EXTEND_TOGGLE_CHK 0x20
-#define MS_BUS_WIDTH_1 0x00
-#define MS_BUS_WIDTH_4 0x10
-#define MS_BUS_WIDTH_8 0x18
-#define MS_2K_SECTOR_MODE 0x04
-#define MS_512_SECTOR_MODE 0x00
-#define MS_TOGGLE_TIMEOUT_EN 0x00
-#define MS_TOGGLE_TIMEOUT_DISEN 0x01
-#define MS_NO_CHECK_INT 0x02
-
-#define WAIT_INT 0x80
-#define NO_WAIT_INT 0x00
-#define NO_AUTO_READ_INT_REG 0x00
-#define AUTO_READ_INT_REG 0x40
-#define MS_CRC16_ERR 0x20
-#define MS_RDY_TIMEOUT 0x10
-#define MS_INT_CMDNK 0x08
-#define MS_INT_BREQ 0x04
-#define MS_INT_ERR 0x02
-#define MS_INT_CED 0x01
-
-#define MS_TRANSFER_START 0x80
-#define MS_TRANSFER_END 0x40
-#define MS_TRANSFER_ERR 0x20
-#define MS_BS_STATE 0x10
-#define MS_TM_READ_BYTES 0x00
-#define MS_TM_NORMAL_READ 0x01
-#define MS_TM_WRITE_BYTES 0x04
-#define MS_TM_NORMAL_WRITE 0x05
-#define MS_TM_AUTO_READ 0x08
-#define MS_TM_AUTO_WRITE 0x0C
-
-#define CARD_SHARE_MASK 0x0F
-#define CARD_SHARE_MULTI_LUN 0x00
-#define CARD_SHARE_NORMAL 0x00
-#define CARD_SHARE_48_XD 0x02
-#define CARD_SHARE_48_SD 0x04
-#define CARD_SHARE_48_MS 0x08
-#define CARD_SHARE_BAROSSA_XD 0x00
-#define CARD_SHARE_BAROSSA_SD 0x01
-#define CARD_SHARE_BAROSSA_MS 0x02
-
-#define MS_DRIVE_8 0x00
-#define MS_DRIVE_4 0x40
-#define MS_DRIVE_12 0x80
-#define SD_DRIVE_8 0x00
-#define SD_DRIVE_4 0x10
-#define SD_DRIVE_12 0x20
-#define XD_DRIVE_8 0x00
-#define XD_DRIVE_4 0x04
-#define XD_DRIVE_12 0x08
-
-#define SPI_STOP 0x01
-#define XD_STOP 0x02
-#define SD_STOP 0x04
-#define MS_STOP 0x08
-#define SPI_CLR_ERR 0x10
-#define XD_CLR_ERR 0x20
-#define SD_CLR_ERR 0x40
-#define MS_CLR_ERR 0x80
-
-#define CRC_FIX_CLK (0x00 << 0)
-#define CRC_VAR_CLK0 (0x01 << 0)
-#define CRC_VAR_CLK1 (0x02 << 0)
-#define SD30_FIX_CLK (0x00 << 2)
-#define SD30_VAR_CLK0 (0x01 << 2)
-#define SD30_VAR_CLK1 (0x02 << 2)
-#define SAMPLE_FIX_CLK (0x00 << 4)
-#define SAMPLE_VAR_CLK0 (0x01 << 4)
-#define SAMPLE_VAR_CLK1 (0x02 << 4)
-
-#define SDIO_VER_20 0x80
-#define SDIO_VER_10 0x00
-#define SDIO_VER_CHG 0x40
-#define SDIO_BUS_AUTO_SWITCH 0x10
-
-#define PINGPONG_BUFFER 0x01
-#define RING_BUFFER 0x00
-
-#define RB_FLUSH 0x80
-
-#define DMA_DONE_INT_EN 0x80
-#define SUSPEND_INT_EN 0x40
-#define LINK_RDY_INT_EN 0x20
-#define LINK_DOWN_INT_EN 0x10
-
-#define DMA_DONE_INT 0x80
-#define SUSPEND_INT 0x40
-#define LINK_RDY_INT 0x20
-#define LINK_DOWN_INT 0x10
-
-#define MRD_ERR_INT_EN 0x40
-#define MWR_ERR_INT_EN 0x20
-#define SCSI_CMD_INT_EN 0x10
-#define TLP_RCV_INT_EN 0x08
-#define TLP_TRSMT_INT_EN 0x04
-#define MRD_COMPLETE_INT_EN 0x02
-#define MWR_COMPLETE_INT_EN 0x01
-
-#define MRD_ERR_INT 0x40
-#define MWR_ERR_INT 0x20
-#define SCSI_CMD_INT 0x10
-#define TLP_RX_INT 0x08
-#define TLP_TX_INT 0x04
-#define MRD_COMPLETE_INT 0x02
-#define MWR_COMPLETE_INT 0x01
-
-#define MSG_RX_INT_EN 0x08
-#define MRD_RX_INT_EN 0x04
-#define MWR_RX_INT_EN 0x02
-#define CPLD_RX_INT_EN 0x01
-
-#define MSG_RX_INT 0x08
-#define MRD_RX_INT 0x04
-#define MWR_RX_INT 0x02
-#define CPLD_RX_INT 0x01
-
-#define MSG_TX_INT_EN 0x08
-#define MRD_TX_INT_EN 0x04
-#define MWR_TX_INT_EN 0x02
-#define CPLD_TX_INT_EN 0x01
-
-#define MSG_TX_INT 0x08
-#define MRD_TX_INT 0x04
-#define MWR_TX_INT 0x02
-#define CPLD_TX_INT 0x01
-
-#define DMA_RST 0x80
-#define DMA_BUSY 0x04
-#define DMA_DIR_TO_CARD 0x00
-#define DMA_DIR_FROM_CARD 0x02
-#define DMA_EN 0x01
-#define DMA_128 (0 << 4)
-#define DMA_256 (1 << 4)
-#define DMA_512 (2 << 4)
-#define DMA_1024 (3 << 4)
-#define DMA_PACK_SIZE_MASK 0x30
-
-#define XD_PWR_OFF_DELAY0 0x00
-#define XD_PWR_OFF_DELAY1 0x02
-#define XD_PWR_OFF_DELAY2 0x04
-#define XD_PWR_OFF_DELAY3 0x06
-#define XD_AUTO_PWR_OFF_EN 0xF7
-#define XD_NO_AUTO_PWR_OFF 0x08
-
-#define XD_TIME_RWN_1 0x00
-#define XD_TIME_RWN_STEP 0x20
-#define XD_TIME_RW_1 0x00
-#define XD_TIME_RW_STEP 0x04
-#define XD_TIME_SETUP_1 0x00
-#define XD_TIME_SETUP_STEP 0x01
-
-#define XD_ECC2_UNCORRECTABLE 0x80
-#define XD_ECC2_ERROR 0x40
-#define XD_ECC1_UNCORRECTABLE 0x20
-#define XD_ECC1_ERROR 0x10
-#define XD_RDY 0x04
-#define XD_CE_EN 0xFD
-#define XD_CE_DISEN 0x02
-#define XD_WP_EN 0xFE
-#define XD_WP_DISEN 0x01
-
-#define XD_TRANSFER_START 0x80
-#define XD_TRANSFER_END 0x40
-#define XD_PPB_EMPTY 0x20
-#define XD_RESET 0x00
-#define XD_ERASE 0x01
-#define XD_READ_STATUS 0x02
-#define XD_READ_ID 0x03
-#define XD_READ_REDUNDANT 0x04
-#define XD_READ_PAGES 0x05
-#define XD_SET_CMD 0x06
-#define XD_NORMAL_READ 0x07
-#define XD_WRITE_PAGES 0x08
-#define XD_NORMAL_WRITE 0x09
-#define XD_WRITE_REDUNDANT 0x0A
-#define XD_SET_ADDR 0x0B
-
-#define XD_PPB_TO_SIE 0x80
-#define XD_TO_PPB_ONLY 0x00
-#define XD_BA_TRANSFORM 0x40
-#define XD_BA_NO_TRANSFORM 0x00
-#define XD_NO_CALC_ECC 0x20
-#define XD_CALC_ECC 0x00
-#define XD_IGNORE_ECC 0x10
-#define XD_CHECK_ECC 0x00
-#define XD_DIRECT_TO_RB 0x08
-#define XD_ADDR_LENGTH_0 0x00
-#define XD_ADDR_LENGTH_1 0x01
-#define XD_ADDR_LENGTH_2 0x02
-#define XD_ADDR_LENGTH_3 0x03
-#define XD_ADDR_LENGTH_4 0x04
-
-#define XD_GPG 0xFF
-#define XD_BPG 0x00
-
-#define XD_GBLK 0xFF
-#define XD_LATER_BBLK 0xF0
-
-#define XD_ECC2_ALL1 0x80
-#define XD_ECC1_ALL1 0x40
-#define XD_BA2_ALL0 0x20
-#define XD_BA1_ALL0 0x10
-#define XD_BA1_BA2_EQL 0x04
-#define XD_BA2_VALID 0x02
-#define XD_BA1_VALID 0x01
-
-#define XD_PGSTS_ZEROBIT_OVER4 0x00
-#define XD_PGSTS_NOT_FF 0x02
-#define XD_AUTO_CHK_DATA_STATUS 0x01
-
-#define RSTB_MODE_DETECT 0x80
-#define MODE_OUT_VLD 0x40
-#define MODE_OUT_0_NONE 0x00
-#define MODE_OUT_10_NONE 0x04
-#define MODE_OUT_10_47 0x05
-#define MODE_OUT_10_180 0x06
-#define MODE_OUT_10_680 0x07
-#define MODE_OUT_16_NONE 0x08
-#define MODE_OUT_16_47 0x09
-#define MODE_OUT_16_180 0x0A
-#define MODE_OUT_16_680 0x0B
-#define MODE_OUT_NONE_NONE 0x0C
-#define MODE_OUT_NONE_47 0x0D
-#define MODE_OUT_NONE_180 0x0E
-#define MODE_OUT_NONE_680 0x0F
-
-#define CARD_OC_INT_EN 0x20
-#define CARD_DETECT_EN 0x08
-
-#define MS_DETECT_EN 0x80
-#define MS_OCP_INT_EN 0x40
-#define MS_OCP_INT_CLR 0x20
-#define MS_OC_CLR 0x10
-#define SD_DETECT_EN 0x08
-#define SD_OCP_INT_EN 0x04
-#define SD_OCP_INT_CLR 0x02
-#define SD_OC_CLR 0x01
-
-#define CARD_OCP_DETECT 0x80
-#define CARD_OC_NOW 0x08
-#define CARD_OC_EVER 0x04
-
-#define MS_OCP_DETECT 0x80
-#define MS_OC_NOW 0x40
-#define MS_OC_EVER 0x20
-#define SD_OCP_DETECT 0x08
-#define SD_OC_NOW 0x04
-#define SD_OC_EVER 0x02
-
-#define CARD_OC_INT_CLR 0x08
-#define CARD_OC_CLR 0x02
-
-#define SD_OCP_GLITCH_MASK 0x07
-#define SD_OCP_GLITCH_6_4 0x00
-#define SD_OCP_GLITCH_64 0x01
-#define SD_OCP_GLITCH_640 0x02
-#define SD_OCP_GLITCH_1000 0x03
-#define SD_OCP_GLITCH_2000 0x04
-#define SD_OCP_GLITCH_4000 0x05
-#define SD_OCP_GLITCH_8000 0x06
-#define SD_OCP_GLITCH_10000 0x07
-
-#define MS_OCP_GLITCH_MASK 0x70
-#define MS_OCP_GLITCH_6_4 (0x00 << 4)
-#define MS_OCP_GLITCH_64 (0x01 << 4)
-#define MS_OCP_GLITCH_640 (0x02 << 4)
-#define MS_OCP_GLITCH_1000 (0x03 << 4)
-#define MS_OCP_GLITCH_2000 (0x04 << 4)
-#define MS_OCP_GLITCH_4000 (0x05 << 4)
-#define MS_OCP_GLITCH_8000 (0x06 << 4)
-#define MS_OCP_GLITCH_10000 (0x07 << 4)
-
-#define OCP_TIME_60 0x00
-#define OCP_TIME_100 (0x01 << 3)
-#define OCP_TIME_200 (0x02 << 3)
-#define OCP_TIME_400 (0x03 << 3)
-#define OCP_TIME_600 (0x04 << 3)
-#define OCP_TIME_800 (0x05 << 3)
-#define OCP_TIME_1100 (0x06 << 3)
-#define OCP_TIME_MASK 0x38
-
-#define MS_OCP_TIME_60 0x00
-#define MS_OCP_TIME_100 (0x01 << 4)
-#define MS_OCP_TIME_200 (0x02 << 4)
-#define MS_OCP_TIME_400 (0x03 << 4)
-#define MS_OCP_TIME_600 (0x04 << 4)
-#define MS_OCP_TIME_800 (0x05 << 4)
-#define MS_OCP_TIME_1100 (0x06 << 4)
-#define MS_OCP_TIME_MASK 0x70
-
-#define SD_OCP_TIME_60 0x00
-#define SD_OCP_TIME_100 0x01
-#define SD_OCP_TIME_200 0x02
-#define SD_OCP_TIME_400 0x03
-#define SD_OCP_TIME_600 0x04
-#define SD_OCP_TIME_800 0x05
-#define SD_OCP_TIME_1100 0x06
-#define SD_OCP_TIME_MASK 0x07
-
-#define OCP_THD_315_417 0x00
-#define OCP_THD_283_783 (0x01 << 6)
-#define OCP_THD_244_946 (0x02 << 6)
-#define OCP_THD_191_1080 (0x03 << 6)
-#define OCP_THD_MASK 0xC0
-
-#define MS_OCP_THD_450 0x00
-#define MS_OCP_THD_550 (0x01 << 4)
-#define MS_OCP_THD_650 (0x02 << 4)
-#define MS_OCP_THD_750 (0x03 << 4)
-#define MS_OCP_THD_850 (0x04 << 4)
-#define MS_OCP_THD_950 (0x05 << 4)
-#define MS_OCP_THD_1050 (0x06 << 4)
-#define MS_OCP_THD_1150 (0x07 << 4)
-#define MS_OCP_THD_MASK 0x70
-
-#define SD_OCP_THD_450 0x00
-#define SD_OCP_THD_550 0x01
-#define SD_OCP_THD_650 0x02
-#define SD_OCP_THD_750 0x03
-#define SD_OCP_THD_850 0x04
-#define SD_OCP_THD_950 0x05
-#define SD_OCP_THD_1050 0x06
-#define SD_OCP_THD_1150 0x07
-#define SD_OCP_THD_MASK 0x07
-
-#define FPGA_MS_PULL_CTL_EN 0xEF
-#define FPGA_SD_PULL_CTL_EN 0xF7
-#define FPGA_XD_PULL_CTL_EN1 0xFE
-#define FPGA_XD_PULL_CTL_EN2 0xFD
-#define FPGA_XD_PULL_CTL_EN3 0xFB
-
-#define FPGA_MS_PULL_CTL_BIT 0x10
-#define FPGA_SD_PULL_CTL_BIT 0x08
-
-#define BLINK_EN 0x08
-#define LED_GPIO0 (0 << 4)
-#define LED_GPIO1 (1 << 4)
-#define LED_GPIO2 (2 << 4)
-
-#define SDIO_BUS_CTRL 0x01
-#define SDIO_CD_CTRL 0x02
-
-#define SSC_RSTB 0x80
-#define SSC_8X_EN 0x40
-#define SSC_FIX_FRAC 0x20
-#define SSC_SEL_1M 0x00
-#define SSC_SEL_2M 0x08
-#define SSC_SEL_4M 0x10
-#define SSC_SEL_8M 0x18
-
-#define SSC_DEPTH_MASK 0x07
-#define SSC_DEPTH_DISALBE 0x00
-#define SSC_DEPTH_4M 0x01
-#define SSC_DEPTH_2M 0x02
-#define SSC_DEPTH_1M 0x03
-#define SSC_DEPTH_512K 0x04
-#define SSC_DEPTH_256K 0x05
-#define SSC_DEPTH_128K 0x06
-#define SSC_DEPTH_64K 0x07
-
-#define XD_D3_NP 0x00
-#define XD_D3_PD (0x01 << 6)
-#define XD_D3_PU (0x02 << 6)
-#define XD_D2_NP 0x00
-#define XD_D2_PD (0x01 << 4)
-#define XD_D2_PU (0x02 << 4)
-#define XD_D1_NP 0x00
-#define XD_D1_PD (0x01 << 2)
-#define XD_D1_PU (0x02 << 2)
-#define XD_D0_NP 0x00
-#define XD_D0_PD 0x01
-#define XD_D0_PU 0x02
-
-#define SD_D7_NP 0x00
-#define SD_D7_PD (0x01 << 4)
-#define SD_DAT7_PU (0x02 << 4)
-#define SD_CLK_NP 0x00
-#define SD_CLK_PD (0x01 << 2)
-#define SD_CLK_PU (0x02 << 2)
-#define SD_D5_NP 0x00
-#define SD_D5_PD 0x01
-#define SD_D5_PU 0x02
-
-#define MS_D1_NP 0x00
-#define MS_D1_PD (0x01 << 6)
-#define MS_D1_PU (0x02 << 6)
-#define MS_D2_NP 0x00
-#define MS_D2_PD (0x01 << 4)
-#define MS_D2_PU (0x02 << 4)
-#define MS_CLK_NP 0x00
-#define MS_CLK_PD (0x01 << 2)
-#define MS_CLK_PU (0x02 << 2)
-#define MS_D6_NP 0x00
-#define MS_D6_PD 0x01
-#define MS_D6_PU 0x02
-
-#define XD_D7_NP 0x00
-#define XD_D7_PD (0x01 << 6)
-#define XD_D7_PU (0x02 << 6)
-#define XD_D6_NP 0x00
-#define XD_D6_PD (0x01 << 4)
-#define XD_D6_PU (0x02 << 4)
-#define XD_D5_NP 0x00
-#define XD_D5_PD (0x01 << 2)
-#define XD_D5_PU (0x02 << 2)
-#define XD_D4_NP 0x00
-#define XD_D4_PD 0x01
-#define XD_D4_PU 0x02
-
-#define SD_D6_NP 0x00
-#define SD_D6_PD (0x01 << 6)
-#define SD_D6_PU (0x02 << 6)
-#define SD_D0_NP 0x00
-#define SD_D0_PD (0x01 << 4)
-#define SD_D0_PU (0x02 << 4)
-#define SD_D1_NP 0x00
-#define SD_D1_PD 0x01
-#define SD_D1_PU 0x02
-
-#define MS_D3_NP 0x00
-#define MS_D3_PD (0x01 << 6)
-#define MS_D3_PU (0x02 << 6)
-#define MS_D0_NP 0x00
-#define MS_D0_PD (0x01 << 4)
-#define MS_D0_PU (0x02 << 4)
-#define MS_BS_NP 0x00
-#define MS_BS_PD (0x01 << 2)
-#define MS_BS_PU (0x02 << 2)
-
-#define XD_WP_NP 0x00
-#define XD_WP_PD (0x01 << 6)
-#define XD_WP_PU (0x02 << 6)
-#define XD_CE_NP 0x00
-#define XD_CE_PD (0x01 << 3)
-#define XD_CE_PU (0x02 << 3)
-#define XD_CLE_NP 0x00
-#define XD_CLE_PD (0x01 << 1)
-#define XD_CLE_PU (0x02 << 1)
-#define XD_CD_PD 0x00
-#define XD_CD_PU 0x01
-
-#define SD_D4_NP 0x00
-#define SD_D4_PD (0x01 << 6)
-#define SD_D4_PU (0x02 << 6)
-
-#define MS_D7_NP 0x00
-#define MS_D7_PD (0x01 << 6)
-#define MS_D7_PU (0x02 << 6)
-
-#define XD_RDY_NP 0x00
-#define XD_RDY_PD (0x01 << 6)
-#define XD_RDY_PU (0x02 << 6)
-#define XD_WE_NP 0x00
-#define XD_WE_PD (0x01 << 4)
-#define XD_WE_PU (0x02 << 4)
-#define XD_RE_NP 0x00
-#define XD_RE_PD (0x01 << 2)
-#define XD_RE_PU (0x02 << 2)
-#define XD_ALE_NP 0x00
-#define XD_ALE_PD 0x01
-#define XD_ALE_PU 0x02
-
-#define SD_D3_NP 0x00
-#define SD_D3_PD (0x01 << 4)
-#define SD_D3_PU (0x02 << 4)
-#define SD_D2_NP 0x00
-#define SD_D2_PD (0x01 << 2)
-#define SD_D2_PU (0x02 << 2)
-
-#define MS_INS_PD 0x00
-#define MS_INS_PU (0x01 << 7)
-#define SD_WP_NP 0x00
-#define SD_WP_PD (0x01 << 5)
-#define SD_WP_PU (0x02 << 5)
-#define SD_CD_PD 0x00
-#define SD_CD_PU (0x01 << 4)
-#define SD_CMD_NP 0x00
-#define SD_CMD_PD (0x01 << 2)
-#define SD_CMD_PU (0x02 << 2)
-
-#define MS_D5_NP 0x00
-#define MS_D5_PD (0x01 << 2)
-#define MS_D5_PU (0x02 << 2)
-#define MS_D4_NP 0x00
-#define MS_D4_PD 0x01
-#define MS_D4_PU 0x02
-
-#define FORCE_PM_CLOCK 0x10
-#define EN_CLOCK_PM 0x01
-
-#define HOST_ENTER_S3 0x02
-#define HOST_ENTER_S1 0x01
-
-#define AUX_PWR_DETECTED 0x01
-
-#define PHY_DEBUG_MODE 0x01
-
-#define SPI_COMMAND_BIT_8 0xE0
-#define SPI_ADDRESS_BIT_24 0x17
-#define SPI_ADDRESS_BIT_32 0x1F
-
-#define SPI_TRANSFER0_START 0x80
-#define SPI_TRANSFER0_END 0x40
-#define SPI_C_MODE0 0x00
-#define SPI_CA_MODE0 0x01
-#define SPI_CDO_MODE0 0x02
-#define SPI_CDI_MODE0 0x03
-#define SPI_CADO_MODE0 0x04
-#define SPI_CADI_MODE0 0x05
-#define SPI_POLLING_MODE0 0x06
-
-#define SPI_TRANSFER1_START 0x80
-#define SPI_TRANSFER1_END 0x40
-#define SPI_DO_MODE1 0x00
-#define SPI_DI_MODE1 0x01
-
-#define CS_POLARITY_HIGH 0x40
-#define CS_POLARITY_LOW 0x00
-#define DTO_MSB_FIRST 0x00
-#define DTO_LSB_FIRST 0x20
-#define SPI_MASTER 0x00
-#define SPI_SLAVE 0x10
-#define SPI_MODE0 0x00
-#define SPI_MODE1 0x04
-#define SPI_MODE2 0x08
-#define SPI_MODE3 0x0C
-#define SPI_MANUAL 0x00
-#define SPI_HALF_AUTO 0x01
-#define SPI_AUTO 0x02
-#define SPI_EEPROM_AUTO 0x03
-
-#define EDO_TIMING_MASK 0x03
-#define SAMPLE_RISING 0x00
-#define SAMPLE_DELAY_HALF 0x01
-#define SAMPLE_DELAY_ONE 0x02
-#define SAPMLE_DELAY_ONE_HALF 0x03
-#define TCS_MASK 0x0C
-
-#define NOT_BYPASS_SD 0x02
-#define DISABLE_SDIO_FUNC 0x04
-#define SELECT_1LUN 0x08
-
-#define PWR_GATE_EN 0x01
-#define LDO3318_PWR_MASK 0x06
-#define LDO_ON 0x00
-#define LDO_SUSPEND 0x04
-#define LDO_OFF 0x06
-
-#define SD_CFG1 0xFDA0
-#define SD_CFG2 0xFDA1
-#define SD_CFG3 0xFDA2
-#define SD_STAT1 0xFDA3
-#define SD_STAT2 0xFDA4
-#define SD_BUS_STAT 0xFDA5
-#define SD_PAD_CTL 0xFDA6
-#define SD_SAMPLE_POINT_CTL 0xFDA7
-#define SD_PUSH_POINT_CTL 0xFDA8
-#define SD_CMD0 0xFDA9
-#define SD_CMD1 0xFDAA
-#define SD_CMD2 0xFDAB
-#define SD_CMD3 0xFDAC
-#define SD_CMD4 0xFDAD
-#define SD_CMD5 0xFDAE
-#define SD_BYTE_CNT_L 0xFDAF
-#define SD_BYTE_CNT_H 0xFDB0
-#define SD_BLOCK_CNT_L 0xFDB1
-#define SD_BLOCK_CNT_H 0xFDB2
-#define SD_TRANSFER 0xFDB3
-#define SD_CMD_STATE 0xFDB5
-#define SD_DATA_STATE 0xFDB6
-
-#define DCM_DRP_CTL 0xFC23
-#define DCM_DRP_TRIG 0xFC24
-#define DCM_DRP_CFG 0xFC25
-#define DCM_DRP_WR_DATA_L 0xFC26
-#define DCM_DRP_WR_DATA_H 0xFC27
-#define DCM_DRP_RD_DATA_L 0xFC28
-#define DCM_DRP_RD_DATA_H 0xFC29
-#define SD_VPCLK0_CTL 0xFC2A
-#define SD_VPCLK1_CTL 0xFC2B
-#define SD_DCMPS0_CTL 0xFC2C
-#define SD_DCMPS1_CTL 0xFC2D
-#define SD_VPTX_CTL SD_VPCLK0_CTL
-#define SD_VPRX_CTL SD_VPCLK1_CTL
-#define SD_DCMPS_TX_CTL SD_DCMPS0_CTL
-#define SD_DCMPS_RX_CTL SD_DCMPS1_CTL
-
-#define CARD_CLK_SOURCE 0xFC2E
-
-#define CARD_PWR_CTL 0xFD50
-#define CARD_CLK_SWITCH 0xFD51
-#define CARD_SHARE_MODE 0xFD52
-#define CARD_DRIVE_SEL 0xFD53
-#define CARD_STOP 0xFD54
-#define CARD_OE 0xFD55
-#define CARD_AUTO_BLINK 0xFD56
-#define CARD_GPIO_DIR 0xFD57
-#define CARD_GPIO 0xFD58
-
-#define CARD_DATA_SOURCE 0xFD5B
-#define CARD_SELECT 0xFD5C
-#define SD30_DRIVE_SEL 0xFD5E
-
-#define CARD_CLK_EN 0xFD69
-
-#define SDIO_CTRL 0xFD6B
-
-#define FPDCTL 0xFC00
-#define PDINFO 0xFC01
-
-#define CLK_CTL 0xFC02
-#define CLK_DIV 0xFC03
-#define CLK_SEL 0xFC04
-
-#define SSC_DIV_N_0 0xFC0F
-#define SSC_DIV_N_1 0xFC10
-
-#define RCCTL 0xFC14
-
-#define FPGA_PULL_CTL 0xFC1D
-
-#define CARD_PULL_CTL1 0xFD60
-#define CARD_PULL_CTL2 0xFD61
-#define CARD_PULL_CTL3 0xFD62
-#define CARD_PULL_CTL4 0xFD63
-#define CARD_PULL_CTL5 0xFD64
-#define CARD_PULL_CTL6 0xFD65
-
-#define IRQEN0 0xFE20
-#define IRQSTAT0 0xFE21
-#define IRQEN1 0xFE22
-#define IRQSTAT1 0xFE23
-#define TLPRIEN 0xFE24
-#define TLPRISTAT 0xFE25
-#define TLPTIEN 0xFE26
-#define TLPTISTAT 0xFE27
-#define DMATC0 0xFE28
-#define DMATC1 0xFE29
-#define DMATC2 0xFE2A
-#define DMATC3 0xFE2B
-#define DMACTL 0xFE2C
-#define BCTL 0xFE2D
-#define RBBC0 0xFE2E
-#define RBBC1 0xFE2F
-#define RBDAT 0xFE30
-#define RBCTL 0xFE34
-#define CFGADDR0 0xFE35
-#define CFGADDR1 0xFE36
-#define CFGDATA0 0xFE37
-#define CFGDATA1 0xFE38
-#define CFGDATA2 0xFE39
-#define CFGDATA3 0xFE3A
-#define CFGRWCTL 0xFE3B
-#define PHYRWCTL 0xFE3C
-#define PHYDATA0 0xFE3D
-#define PHYDATA1 0xFE3E
-#define PHYADDR 0xFE3F
-#define MSGRXDATA0 0xFE40
-#define MSGRXDATA1 0xFE41
-#define MSGRXDATA2 0xFE42
-#define MSGRXDATA3 0xFE43
-#define MSGTXDATA0 0xFE44
-#define MSGTXDATA1 0xFE45
-#define MSGTXDATA2 0xFE46
-#define MSGTXDATA3 0xFE47
-#define MSGTXCTL 0xFE48
-#define PETXCFG 0xFE49
-
-#define CDRESUMECTL 0xFE52
-#define WAKE_SEL_CTL 0xFE54
-#define PME_FORCE_CTL 0xFE56
-#define ASPM_FORCE_CTL 0xFE57
-#define PM_CLK_FORCE_CTL 0xFE58
-#define PERST_GLITCH_WIDTH 0xFE5C
-#define CHANGE_LINK_STATE 0xFE5B
-#define RESET_LOAD_REG 0xFE5E
-#define HOST_SLEEP_STATE 0xFE60
-#define MAIN_PWR_OFF_CTL 0xFE70 /* RTS5208 */
-#define SDIO_CFG 0xFE70 /* RTS5209 */
-
-#define NFTS_TX_CTRL 0xFE72
-
-#define PWR_GATE_CTRL 0xFE75
-#define PWD_SUSPEND_EN 0xFE76
-
-#define EFUSE_CONTENT 0xFE5F
-
-#define XD_INIT 0xFD10
-#define XD_DTCTL 0xFD11
-#define XD_CTL 0xFD12
-#define XD_TRANSFER 0xFD13
-#define XD_CFG 0xFD14
-#define XD_ADDRESS0 0xFD15
-#define XD_ADDRESS1 0xFD16
-#define XD_ADDRESS2 0xFD17
-#define XD_ADDRESS3 0xFD18
-#define XD_ADDRESS4 0xFD19
-#define XD_DAT 0xFD1A
-#define XD_PAGE_CNT 0xFD1B
-#define XD_PAGE_STATUS 0xFD1C
-#define XD_BLOCK_STATUS 0xFD1D
-#define XD_BLOCK_ADDR1_L 0xFD1E
-#define XD_BLOCK_ADDR1_H 0xFD1F
-#define XD_BLOCK_ADDR2_L 0xFD20
-#define XD_BLOCK_ADDR2_H 0xFD21
-#define XD_BYTE_CNT_L 0xFD22
-#define XD_BYTE_CNT_H 0xFD23
-#define XD_PARITY 0xFD24
-#define XD_ECC_BIT1 0xFD25
-#define XD_ECC_BYTE1 0xFD26
-#define XD_ECC_BIT2 0xFD27
-#define XD_ECC_BYTE2 0xFD28
-#define XD_RESERVED0 0xFD29
-#define XD_RESERVED1 0xFD2A
-#define XD_RESERVED2 0xFD2B
-#define XD_RESERVED3 0xFD2C
-#define XD_CHK_DATA_STATUS 0xFD2D
-#define XD_CATCTL 0xFD2E
-
-#define MS_CFG 0xFD40
-#define MS_TPC 0xFD41
-#define MS_TRANS_CFG 0xFD42
-#define MS_TRANSFER 0xFD43
-#define MS_INT_REG 0xFD44
-#define MS_BYTE_CNT 0xFD45
-#define MS_SECTOR_CNT_L 0xFD46
-#define MS_SECTOR_CNT_H 0xFD47
-#define MS_DBUS_H 0xFD48
-
-#define SSC_CTL1 0xFC11
-#define SSC_CTL2 0xFC12
-
-#define OCPCTL 0xFC15
-#define OCPSTAT 0xFC16
-#define OCPCLR 0xFC17 /* 5208 */
-#define OCPGLITCH 0xFC17 /* 5209 */
-#define OCPPARA1 0xFC18
-#define OCPPARA2 0xFC19
-
-#define EFUSE_OP 0xFC20
-#define EFUSE_CTRL 0xFC21
-#define EFUSE_DATA 0xFC22
-
-#define SPI_COMMAND 0xFD80
-#define SPI_ADDR0 0xFD81
-#define SPI_ADDR1 0xFD82
-#define SPI_ADDR2 0xFD83
-#define SPI_ADDR3 0xFD84
-#define SPI_CA_NUMBER 0xFD85
-#define SPI_LENGTH0 0xFD86
-#define SPI_LENGTH1 0xFD87
-#define SPI_DATA 0xFD88
-#define SPI_DATA_NUMBER 0xFD89
-#define SPI_TRANSFER0 0xFD90
-#define SPI_TRANSFER1 0xFD91
-#define SPI_CONTROL 0xFD92
-#define SPI_SIG 0xFD93
-#define SPI_TCTL 0xFD94
-#define SPI_SLAVE_NUM 0xFD95
-#define SPI_CLK_DIVIDER0 0xFD96
-#define SPI_CLK_DIVIDER1 0xFD97
-
-#define SRAM_BASE 0xE600
-#define RBUF_BASE 0xF400
-#define PPBUF_BASE1 0xF800
-#define PPBUF_BASE2 0xFA00
-#define IMAGE_FLAG_ADDR0 0xCE80
-#define IMAGE_FLAG_ADDR1 0xCE81
-
-#define READ_OP 1
-#define WRITE_OP 2
-
-#define LCTLR 0x80
-
-#define POLLING_WAIT_CNT 1
-#define IDLE_MAX_COUNT 10
-#define SDIO_IDLE_COUNT 10
-
-#define DEBOUNCE_CNT 5
-
-void do_remaining_work(struct rtsx_chip *chip);
-void try_to_switch_sdio_ctrl(struct rtsx_chip *chip);
-void do_reset_sd_card(struct rtsx_chip *chip);
-void do_reset_xd_card(struct rtsx_chip *chip);
-void do_reset_ms_card(struct rtsx_chip *chip);
-void rtsx_power_off_card(struct rtsx_chip *chip);
-void rtsx_release_cards(struct rtsx_chip *chip);
-void rtsx_reset_cards(struct rtsx_chip *chip);
-void rtsx_reinit_cards(struct rtsx_chip *chip, int reset_chip);
-void rtsx_init_cards(struct rtsx_chip *chip);
-int switch_ssc_clock(struct rtsx_chip *chip, int clk);
-int switch_normal_clock(struct rtsx_chip *chip, int clk);
-int enable_card_clock(struct rtsx_chip *chip, u8 card);
-int disable_card_clock(struct rtsx_chip *chip, u8 card);
-int card_rw(struct scsi_cmnd *srb, struct rtsx_chip *chip, u32 sec_addr, u16 sec_cnt);
-void trans_dma_enable(enum dma_data_direction dir, struct rtsx_chip *chip, u32 byte_cnt, u8 pack_size);
-void toggle_gpio(struct rtsx_chip *chip, u8 gpio);
-void turn_on_led(struct rtsx_chip *chip, u8 gpio);
-void turn_off_led(struct rtsx_chip *chip, u8 gpio);
-
-int card_share_mode(struct rtsx_chip *chip, int card);
-int select_card(struct rtsx_chip *chip, int card);
-int detect_card_cd(struct rtsx_chip *chip, int card);
-int check_card_exist(struct rtsx_chip *chip, unsigned int lun);
-int check_card_ready(struct rtsx_chip *chip, unsigned int lun);
-int check_card_wp(struct rtsx_chip *chip, unsigned int lun);
-int check_card_fail(struct rtsx_chip *chip, unsigned int lun);
-int check_card_ejected(struct rtsx_chip *chip, unsigned int lun);
-void eject_card(struct rtsx_chip *chip, unsigned int lun);
-u8 get_lun_card(struct rtsx_chip *chip, unsigned int lun);
-
-static inline u32 get_card_size(struct rtsx_chip *chip, unsigned int lun)
-{
-#ifdef SUPPORT_SD_LOCK
- struct sd_info *sd_card = &(chip->sd_card);
-
- if ((get_lun_card(chip, lun) == SD_CARD) && (sd_card->sd_lock_status & SD_LOCKED))
- return 0;
- else
- return chip->capacity[lun];
-#else
- return chip->capacity[lun];
-#endif
-}
-
-static inline int switch_clock(struct rtsx_chip *chip, int clk)
-{
- int retval = 0;
-
- if (chip->asic_code)
- retval = switch_ssc_clock(chip, clk);
- else
- retval = switch_normal_clock(chip, clk);
-
- return retval;
-}
-
-int card_power_on(struct rtsx_chip *chip, u8 card);
-int card_power_off(struct rtsx_chip *chip, u8 card);
-
-static inline int card_power_off_all(struct rtsx_chip *chip)
-{
- RTSX_WRITE_REG(chip, CARD_PWR_CTL, 0x0F, 0x0F);
-
- return STATUS_SUCCESS;
-}
-
-static inline void rtsx_clear_xd_error(struct rtsx_chip *chip)
-{
- rtsx_write_register(chip, CARD_STOP, XD_STOP | XD_CLR_ERR, XD_STOP | XD_CLR_ERR);
-}
-
-static inline void rtsx_clear_sd_error(struct rtsx_chip *chip)
-{
- rtsx_write_register(chip, CARD_STOP, SD_STOP | SD_CLR_ERR, SD_STOP | SD_CLR_ERR);
-}
-
-static inline void rtsx_clear_ms_error(struct rtsx_chip *chip)
-{
- rtsx_write_register(chip, CARD_STOP, MS_STOP | MS_CLR_ERR, MS_STOP | MS_CLR_ERR);
-}
-
-static inline void rtsx_clear_spi_error(struct rtsx_chip *chip)
-{
- rtsx_write_register(chip, CARD_STOP, SPI_STOP | SPI_CLR_ERR, SPI_STOP | SPI_CLR_ERR);
-}
-
-#ifdef SUPPORT_SDIO_ASPM
-void dynamic_configure_sdio_aspm(struct rtsx_chip *chip);
-#endif
-
-#endif /* __REALTEK_RTSX_CARD_H */
diff --git a/drivers/staging/rts_pstor/rtsx_chip.c b/drivers/staging/rts_pstor/rtsx_chip.c
deleted file mode 100644
index d8e691b..0000000
--- a/drivers/staging/rts_pstor/rtsx_chip.c
+++ /dev/null
@@ -1,2264 +0,0 @@
-/* Driver for Realtek PCI-Express card reader
- *
- * Copyright(c) 2009 Realtek Semiconductor Corp. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, see <http://www.gnu.org/licenses/>.
- *
- * Author:
- * wwang (wei_wang@realsil.com.cn)
- * No. 450, Shenhu Road, Suzhou Industry Park, Suzhou, China
- */
-
-#include <linux/blkdev.h>
-#include <linux/kthread.h>
-#include <linux/sched.h>
-#include <linux/workqueue.h>
-#include <linux/vmalloc.h>
-
-#include "rtsx.h"
-#include "rtsx_transport.h"
-#include "rtsx_scsi.h"
-#include "rtsx_card.h"
-#include "rtsx_chip.h"
-#include "rtsx_sys.h"
-#include "general.h"
-
-#include "sd.h"
-#include "xd.h"
-#include "ms.h"
-
-static void rtsx_calibration(struct rtsx_chip *chip)
-{
- rtsx_write_phy_register(chip, 0x1B, 0x135E);
- wait_timeout(10);
- rtsx_write_phy_register(chip, 0x00, 0x0280);
- rtsx_write_phy_register(chip, 0x01, 0x7112);
- rtsx_write_phy_register(chip, 0x01, 0x7110);
- rtsx_write_phy_register(chip, 0x01, 0x7112);
- rtsx_write_phy_register(chip, 0x01, 0x7113);
- rtsx_write_phy_register(chip, 0x00, 0x0288);
-}
-
-void rtsx_disable_card_int(struct rtsx_chip *chip)
-{
- u32 reg = rtsx_readl(chip, RTSX_BIER);
-
- reg &= ~(XD_INT_EN | SD_INT_EN | MS_INT_EN);
- rtsx_writel(chip, RTSX_BIER, reg);
-}
-
-void rtsx_enable_card_int(struct rtsx_chip *chip)
-{
- u32 reg = rtsx_readl(chip, RTSX_BIER);
- int i;
-
- for (i = 0; i <= chip->max_lun; i++) {
- if (chip->lun2card[i] & XD_CARD)
- reg |= XD_INT_EN;
- if (chip->lun2card[i] & SD_CARD)
- reg |= SD_INT_EN;
- if (chip->lun2card[i] & MS_CARD)
- reg |= MS_INT_EN;
- }
- if (chip->hw_bypass_sd)
- reg &= ~((u32)SD_INT_EN);
-
- rtsx_writel(chip, RTSX_BIER, reg);
-}
-
-void rtsx_enable_bus_int(struct rtsx_chip *chip)
-{
- u32 reg = 0;
-#ifndef DISABLE_CARD_INT
- int i;
-#endif
-
- reg = TRANS_OK_INT_EN | TRANS_FAIL_INT_EN;
-
-#ifndef DISABLE_CARD_INT
- for (i = 0; i <= chip->max_lun; i++) {
- RTSX_DEBUGP("lun2card[%d] = 0x%02x\n", i, chip->lun2card[i]);
-
- if (chip->lun2card[i] & XD_CARD)
- reg |= XD_INT_EN;
- if (chip->lun2card[i] & SD_CARD)
- reg |= SD_INT_EN;
- if (chip->lun2card[i] & MS_CARD)
- reg |= MS_INT_EN;
- }
- if (chip->hw_bypass_sd)
- reg &= ~((u32)SD_INT_EN);
-#endif
-
- if (chip->ic_version >= IC_VER_C)
- reg |= DELINK_INT_EN;
-#ifdef SUPPORT_OCP
- if (CHECK_PID(chip, 0x5209)) {
- if (CHECK_LUN_MODE(chip, SD_MS_2LUN))
- reg |= MS_OC_INT_EN | SD_OC_INT_EN;
- else
- reg |= SD_OC_INT_EN;
- } else {
- reg |= OC_INT_EN;
- }
-#endif
- if (!chip->adma_mode)
- reg |= DATA_DONE_INT_EN;
-
- /* Enable Bus Interrupt */
- rtsx_writel(chip, RTSX_BIER, reg);
-
- RTSX_DEBUGP("RTSX_BIER: 0x%08x\n", reg);
-}
-
-void rtsx_disable_bus_int(struct rtsx_chip *chip)
-{
- rtsx_writel(chip, RTSX_BIER, 0);
-}
-
-static int rtsx_pre_handle_sdio_old(struct rtsx_chip *chip)
-{
- if (chip->ignore_sd && CHK_SDIO_EXIST(chip)) {
- if (chip->asic_code) {
- RTSX_WRITE_REG(chip, CARD_PULL_CTL5, 0xFF,
- MS_INS_PU | SD_WP_PU | SD_CD_PU | SD_CMD_PU);
- } else {
- RTSX_WRITE_REG(chip, FPGA_PULL_CTL, 0xFF, FPGA_SD_PULL_CTL_EN);
- }
- RTSX_WRITE_REG(chip, CARD_SHARE_MODE, 0xFF, CARD_SHARE_48_SD);
-
- /* Enable SDIO internal clock */
- RTSX_WRITE_REG(chip, 0xFF2C, 0x01, 0x01);
-
- RTSX_WRITE_REG(chip, SDIO_CTRL, 0xFF, SDIO_BUS_CTRL | SDIO_CD_CTRL);
-
- chip->sd_int = 1;
- chip->sd_io = 1;
- } else {
- chip->need_reset |= SD_CARD;
- }
-
- return STATUS_SUCCESS;
-}
-
-#ifdef HW_AUTO_SWITCH_SD_BUS
-static int rtsx_pre_handle_sdio_new(struct rtsx_chip *chip)
-{
- u8 tmp;
- int sw_bypass_sd = 0;
- int retval;
-
- if (chip->driver_first_load) {
- if (CHECK_PID(chip, 0x5288)) {
- RTSX_READ_REG(chip, 0xFE5A, &tmp);
- if (tmp & 0x08)
- sw_bypass_sd = 1;
- } else if (CHECK_PID(chip, 0x5208)) {
- RTSX_READ_REG(chip, 0xFE70, &tmp);
- if (tmp & 0x80)
- sw_bypass_sd = 1;
- } else if (CHECK_PID(chip, 0x5209)) {
- RTSX_READ_REG(chip, SDIO_CFG, &tmp);
- if (tmp & SDIO_BUS_AUTO_SWITCH)
- sw_bypass_sd = 1;
- }
- } else {
- if (chip->sdio_in_charge)
- sw_bypass_sd = 1;
- }
- RTSX_DEBUGP("chip->sdio_in_charge = %d\n", chip->sdio_in_charge);
- RTSX_DEBUGP("chip->driver_first_load = %d\n", chip->driver_first_load);
- RTSX_DEBUGP("sw_bypass_sd = %d\n", sw_bypass_sd);
-
- if (sw_bypass_sd) {
- u8 cd_toggle_mask = 0;
-
- RTSX_READ_REG(chip, TLPTISTAT, &tmp);
- if (CHECK_PID(chip, 0x5209))
- cd_toggle_mask = 0x10;
- else
- cd_toggle_mask = 0x08;
-
- if (tmp & cd_toggle_mask) {
- /* Disable sdio_bus_auto_switch */
- if (CHECK_PID(chip, 0x5288))
- RTSX_WRITE_REG(chip, 0xFE5A, 0x08, 0x00);
- else if (CHECK_PID(chip, 0x5208))
- RTSX_WRITE_REG(chip, 0xFE70, 0x80, 0x00);
- else
- RTSX_WRITE_REG(chip, SDIO_CFG, SDIO_BUS_AUTO_SWITCH, 0);
-
- RTSX_WRITE_REG(chip, TLPTISTAT, 0xFF, tmp);
-
- chip->need_reset |= SD_CARD;
- } else {
- RTSX_DEBUGP("Chip inserted with SDIO!\n");
-
- if (chip->asic_code) {
- retval = sd_pull_ctl_enable(chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
- } else {
- RTSX_WRITE_REG(chip, FPGA_PULL_CTL, FPGA_SD_PULL_CTL_BIT | 0x20, 0);
- }
- retval = card_share_mode(chip, SD_CARD);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- /* Enable sdio_bus_auto_switch */
- if (CHECK_PID(chip, 0x5288)) {
- RTSX_WRITE_REG(chip, 0xFE5A, 0x08, 0x08);
- } else if (CHECK_PID(chip, 0x5208)) {
- RTSX_WRITE_REG(chip, 0xFE70, 0x80, 0x80);
- } else {
- RTSX_WRITE_REG(chip, SDIO_CFG,
- SDIO_BUS_AUTO_SWITCH, SDIO_BUS_AUTO_SWITCH);
- }
- chip->chip_insert_with_sdio = 1;
- chip->sd_io = 1;
- }
- } else {
- if (CHECK_PID(chip, 0x5209))
- RTSX_WRITE_REG(chip, TLPTISTAT, 0x10, 0x10);
- else
- RTSX_WRITE_REG(chip, TLPTISTAT, 0x08, 0x08);
-
- chip->need_reset |= SD_CARD;
- }
-
- return STATUS_SUCCESS;
-}
-#endif
-
-int rtsx_reset_chip(struct rtsx_chip *chip)
-{
- int retval;
-
- rtsx_writel(chip, RTSX_HCBAR, chip->host_cmds_addr);
-
- rtsx_disable_aspm(chip);
-
- if (CHECK_PID(chip, 0x5209) && chip->asic_code) {
- u16 val;
-
- /* optimize PHY */
- retval = rtsx_write_phy_register(chip, 0x00, 0xB966);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- retval = rtsx_write_phy_register(chip, 0x01, 0x713F);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- retval = rtsx_write_phy_register(chip, 0x03, 0xA549);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- retval = rtsx_write_phy_register(chip, 0x06, 0xB235);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- retval = rtsx_write_phy_register(chip, 0x07, 0xEF40);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- retval = rtsx_write_phy_register(chip, 0x1E, 0xF8EB);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- retval = rtsx_write_phy_register(chip, 0x19, 0xFE6C);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- wait_timeout(1);
- retval = rtsx_write_phy_register(chip, 0x0A, 0x05C0);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
-
- retval = rtsx_write_cfg_dw(chip, 1, 0x110, 0xFFFF, 0xFFFF);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- retval = rtsx_read_phy_register(chip, 0x08, &val);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- RTSX_DEBUGP("Read from phy 0x08: 0x%04x\n", val);
-
- if (chip->phy_voltage) {
- chip->phy_voltage &= 0x3F;
- RTSX_DEBUGP("chip->phy_voltage = 0x%x\n", chip->phy_voltage);
- val &= ~0x3F;
- val |= chip->phy_voltage;
- RTSX_DEBUGP("Write to phy 0x08: 0x%04x\n", val);
- retval = rtsx_write_phy_register(chip, 0x08, val);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- } else {
- chip->phy_voltage = (u8)(val & 0x3F);
- RTSX_DEBUGP("Default, chip->phy_voltage = 0x%x\n", chip->phy_voltage);
- }
- }
-
- RTSX_WRITE_REG(chip, HOST_SLEEP_STATE, 0x03, 0x00);
-
- /* Disable card clock */
- RTSX_WRITE_REG(chip, CARD_CLK_EN, 0x1E, 0);
-
-#ifdef SUPPORT_OCP
- /* SSC power on, OCD power on */
- if (CHECK_LUN_MODE(chip, SD_MS_2LUN))
- RTSX_WRITE_REG(chip, FPDCTL, OC_POWER_DOWN, 0);
- else
- RTSX_WRITE_REG(chip, FPDCTL, OC_POWER_DOWN, MS_OC_POWER_DOWN);
-
- if (CHECK_PID(chip, 0x5209)) {
- RTSX_WRITE_REG(chip, OCPPARA1, SD_OCP_TIME_MASK | MS_OCP_TIME_MASK,
- SD_OCP_TIME_800 | MS_OCP_TIME_800);
- RTSX_WRITE_REG(chip, OCPPARA2, SD_OCP_THD_MASK | MS_OCP_THD_MASK,
- chip->sd_400mA_ocp_thd | (chip->ms_ocp_thd << 4));
- if (CHECK_LUN_MODE(chip, SD_MS_2LUN)) {
- RTSX_WRITE_REG(chip, OCPGLITCH, SD_OCP_GLITCH_MASK | MS_OCP_GLITCH_MASK,
- SD_OCP_GLITCH_10000 | MS_OCP_GLITCH_10000);
- } else {
- RTSX_WRITE_REG(chip, OCPGLITCH, SD_OCP_GLITCH_MASK, SD_OCP_GLITCH_10000);
- }
- RTSX_WRITE_REG(chip, OCPCTL, 0xFF,
- SD_OCP_INT_EN | SD_DETECT_EN | MS_OCP_INT_EN | MS_DETECT_EN);
- } else {
- RTSX_WRITE_REG(chip, OCPPARA1, OCP_TIME_MASK, OCP_TIME_800);
- RTSX_WRITE_REG(chip, OCPPARA2, OCP_THD_MASK, OCP_THD_244_946);
- RTSX_WRITE_REG(chip, OCPCTL, 0xFF, CARD_OC_INT_EN | CARD_DETECT_EN);
- }
-#else
- /* OC power down */
- RTSX_WRITE_REG(chip, FPDCTL, OC_POWER_DOWN, OC_POWER_DOWN);
-#endif
-
- if (!CHECK_PID(chip, 0x5288))
- RTSX_WRITE_REG(chip, CARD_GPIO_DIR, 0xFF, 0x03);
-
- /* Turn off LED */
- RTSX_WRITE_REG(chip, CARD_GPIO, 0xFF, 0x03);
-
- /* Reset delink mode */
- RTSX_WRITE_REG(chip, CHANGE_LINK_STATE, 0x0A, 0);
-
- /* Card driving select */
- RTSX_WRITE_REG(chip, CARD_DRIVE_SEL, 0xFF, chip->card_drive_sel);
- if (CHECK_PID(chip, 0x5209))
- RTSX_WRITE_REG(chip, SD30_DRIVE_SEL, 0x07, chip->sd30_drive_sel_3v3);
-
-#ifdef LED_AUTO_BLINK
- RTSX_WRITE_REG(chip, CARD_AUTO_BLINK, 0xFF,
- LED_BLINK_SPEED | BLINK_EN | LED_GPIO0);
-#endif
-
- if (chip->asic_code) {
- /* Enable SSC Clock */
- RTSX_WRITE_REG(chip, SSC_CTL1, 0xFF, SSC_8X_EN | SSC_SEL_4M);
- RTSX_WRITE_REG(chip, SSC_CTL2, 0xFF, 0x12);
- }
-
- /* Disable cd_pwr_save (u_force_rst_core_en=0, u_cd_rst_core_en=0)
- 0xFE5B
- bit[1] u_cd_rst_core_en rst_value = 0
- bit[2] u_force_rst_core_en rst_value = 0
- bit[5] u_mac_phy_rst_n_dbg rst_value = 1
- bit[4] u_non_sticky_rst_n_dbg rst_value = 0
- */
- RTSX_WRITE_REG(chip, CHANGE_LINK_STATE, 0x16, 0x10);
-
- /* Enable ASPM */
- if (chip->aspm_l0s_l1_en) {
- if (chip->dynamic_aspm) {
- if (CHK_SDIO_EXIST(chip)) {
- if (CHECK_PID(chip, 0x5209)) {
- retval = rtsx_write_cfg_dw(chip, 1, 0xC0, 0xFF, chip->aspm_l0s_l1_en);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- } else if (CHECK_PID(chip, 0x5288)) {
- retval = rtsx_write_cfg_dw(chip, 2, 0xC0, 0xFF, chip->aspm_l0s_l1_en);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
- }
- }
- } else {
- if (CHECK_PID(chip, 0x5208))
- RTSX_WRITE_REG(chip, ASPM_FORCE_CTL, 0xFF, 0x3F);
-
- retval = rtsx_write_config_byte(chip, LCTLR, chip->aspm_l0s_l1_en);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- chip->aspm_level[0] = chip->aspm_l0s_l1_en;
- if (CHK_SDIO_EXIST(chip)) {
- chip->aspm_level[1] = chip->aspm_l0s_l1_en;
- if (CHECK_PID(chip, 0x5288))
- retval = rtsx_write_cfg_dw(chip, 2, 0xC0, 0xFF, chip->aspm_l0s_l1_en);
- else
- retval = rtsx_write_cfg_dw(chip, 1, 0xC0, 0xFF, chip->aspm_l0s_l1_en);
-
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- }
-
- chip->aspm_enabled = 1;
- }
- } else {
- if (chip->asic_code && CHECK_PID(chip, 0x5208)) {
- retval = rtsx_write_phy_register(chip, 0x07, 0x0129);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
- }
- retval = rtsx_write_config_byte(chip, LCTLR, chip->aspm_l0s_l1_en);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- retval = rtsx_write_config_byte(chip, 0x81, 1);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- if (CHK_SDIO_EXIST(chip)) {
- if (CHECK_PID(chip, 0x5288))
- retval = rtsx_write_cfg_dw(chip, 2, 0xC0, 0xFF00, 0x0100);
- else
- retval = rtsx_write_cfg_dw(chip, 1, 0xC0, 0xFF00, 0x0100);
-
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- }
-
- if (CHECK_PID(chip, 0x5209)) {
- retval = rtsx_write_cfg_dw(chip, 0, 0x70C, 0xFF000000, 0x5B);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- if (CHECK_PID(chip, 0x5288)) {
- if (!CHK_SDIO_EXIST(chip)) {
- retval = rtsx_write_cfg_dw(chip, 2, 0xC0, 0xFFFF, 0x0103);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- retval = rtsx_write_cfg_dw(chip, 2, 0x84, 0xFF, 0x03);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- }
- }
-
- RTSX_WRITE_REG(chip, IRQSTAT0, LINK_RDY_INT, LINK_RDY_INT);
-
- RTSX_WRITE_REG(chip, PERST_GLITCH_WIDTH, 0xFF, 0x80);
-
- if (CHECK_PID(chip, 0x5209)) {
- RTSX_WRITE_REG(chip, PWD_SUSPEND_EN, 0xFF, 0xFF);
- RTSX_WRITE_REG(chip, PWR_GATE_CTRL, PWR_GATE_EN, PWR_GATE_EN);
- }
-
- /* Enable PCIE interrupt */
- if (chip->asic_code) {
- if (CHECK_PID(chip, 0x5208)) {
- if (chip->phy_debug_mode) {
- RTSX_WRITE_REG(chip, CDRESUMECTL, 0x77, 0);
- rtsx_disable_bus_int(chip);
- } else {
- rtsx_enable_bus_int(chip);
- }
-
- if (chip->ic_version >= IC_VER_D) {
- u16 reg;
- retval = rtsx_read_phy_register(chip, 0x00, ®);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- reg &= 0xFE7F;
- reg |= 0x80;
- retval = rtsx_write_phy_register(chip, 0x00, reg);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- retval = rtsx_read_phy_register(chip, 0x1C, ®);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- reg &= 0xFFF7;
- retval = rtsx_write_phy_register(chip, 0x1C, reg);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- }
-
- if (chip->driver_first_load && (chip->ic_version < IC_VER_C))
- rtsx_calibration(chip);
-
- } else {
- rtsx_enable_bus_int(chip);
- }
- } else {
- rtsx_enable_bus_int(chip);
- }
-
-#ifdef HW_INT_WRITE_CLR
- if (CHECK_PID(chip, 0x5209)) {
- /* Set interrupt write clear */
- RTSX_WRITE_REG(chip, NFTS_TX_CTRL, 0x02, 0);
- }
-#endif
-
- chip->need_reset = 0;
-
- chip->int_reg = rtsx_readl(chip, RTSX_BIPR);
-#ifdef HW_INT_WRITE_CLR
- if (CHECK_PID(chip, 0x5209)) {
- /* Clear interrupt flag */
- rtsx_writel(chip, RTSX_BIPR, chip->int_reg);
- }
-#endif
- if (chip->hw_bypass_sd)
- goto NextCard;
- RTSX_DEBUGP("In rtsx_reset_chip, chip->int_reg = 0x%x\n", chip->int_reg);
- if (chip->int_reg & SD_EXIST) {
-#ifdef HW_AUTO_SWITCH_SD_BUS
- if (CHECK_PID(chip, 0x5208) && (chip->ic_version < IC_VER_C))
- retval = rtsx_pre_handle_sdio_old(chip);
- else
- retval = rtsx_pre_handle_sdio_new(chip);
-
- RTSX_DEBUGP("chip->need_reset = 0x%x (rtsx_reset_chip)\n", (unsigned int)(chip->need_reset));
-#else /* HW_AUTO_SWITCH_SD_BUS */
- retval = rtsx_pre_handle_sdio_old(chip);
-#endif /* HW_AUTO_SWITCH_SD_BUS */
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- } else {
- chip->sd_io = 0;
- RTSX_WRITE_REG(chip, SDIO_CTRL, SDIO_BUS_CTRL | SDIO_CD_CTRL, 0);
- }
-
-NextCard:
- if (chip->int_reg & XD_EXIST)
- chip->need_reset |= XD_CARD;
- if (chip->int_reg & MS_EXIST)
- chip->need_reset |= MS_CARD;
- if (chip->int_reg & CARD_EXIST)
- RTSX_WRITE_REG(chip, SSC_CTL1, SSC_RSTB, SSC_RSTB);
-
- RTSX_DEBUGP("In rtsx_init_chip, chip->need_reset = 0x%x\n", (unsigned int)(chip->need_reset));
-
- RTSX_WRITE_REG(chip, RCCTL, 0x01, 0x00);
-
- if (CHECK_PID(chip, 0x5208) || CHECK_PID(chip, 0x5288)) {
- /* Turn off main power when entering S3/S4 state */
- RTSX_WRITE_REG(chip, MAIN_PWR_OFF_CTL, 0x03, 0x03);
- }
-
- if (chip->remote_wakeup_en && !chip->auto_delink_en) {
- RTSX_WRITE_REG(chip, WAKE_SEL_CTL, 0x07, 0x07);
- if (chip->aux_pwr_exist)
- RTSX_WRITE_REG(chip, PME_FORCE_CTL, 0xFF, 0x33);
- } else {
- RTSX_WRITE_REG(chip, WAKE_SEL_CTL, 0x07, 0x04);
- RTSX_WRITE_REG(chip, PME_FORCE_CTL, 0xFF, 0x30);
- }
-
- if (CHECK_PID(chip, 0x5208) && (chip->ic_version >= IC_VER_D)) {
- RTSX_WRITE_REG(chip, PETXCFG, 0x1C, 0x14);
- } else if (CHECK_PID(chip, 0x5209)) {
- if (chip->force_clkreq_0)
- RTSX_WRITE_REG(chip, PETXCFG, 0x08, 0x08);
- else
- RTSX_WRITE_REG(chip, PETXCFG, 0x08, 0x00);
- }
-
- if (chip->asic_code && CHECK_PID(chip, 0x5208)) {
- retval = rtsx_clr_phy_reg_bit(chip, 0x1C, 2);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- if (chip->ft2_fast_mode) {
- RTSX_WRITE_REG(chip, CARD_PWR_CTL, 0xFF, MS_PARTIAL_POWER_ON | SD_PARTIAL_POWER_ON);
- udelay(chip->pmos_pwr_on_interval);
- RTSX_WRITE_REG(chip, CARD_PWR_CTL, 0xFF, MS_POWER_ON | SD_POWER_ON);
-
- wait_timeout(200);
- }
-
- /* Reset card */
- rtsx_reset_detected_cards(chip, 0);
-
- chip->driver_first_load = 0;
-
- return STATUS_SUCCESS;
-}
-
-static inline int check_sd_speed_prior(u32 sd_speed_prior)
-{
- int i, fake_para = 0;
-
- for (i = 0; i < 4; i++) {
- u8 tmp = (u8)(sd_speed_prior >> (i*8));
- if ((tmp < 0x01) || (tmp > 0x04)) {
- fake_para = 1;
- break;
- }
- }
-
- return !fake_para;
-}
-
-static inline int check_sd_current_prior(u32 sd_current_prior)
-{
- int i, fake_para = 0;
-
- for (i = 0; i < 4; i++) {
- u8 tmp = (u8)(sd_current_prior >> (i*8));
- if (tmp > 0x03) {
- fake_para = 1;
- break;
- }
- }
-
- return !fake_para;
-}
-
-static int rts5209_init(struct rtsx_chip *chip)
-{
- int retval;
- u32 lval = 0;
- u8 val = 0;
-
- val = rtsx_readb(chip, 0x1C);
- if ((val & 0x10) == 0)
- chip->asic_code = 1;
- else
- chip->asic_code = 0;
-
- chip->ic_version = val & 0x0F;
- chip->phy_debug_mode = 0;
-
- chip->aux_pwr_exist = 0;
-
- chip->ms_power_class_en = 0x03;
-
- retval = rtsx_read_cfg_dw(chip, 0, 0x724, &lval);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- RTSX_DEBUGP("dw in 0x724: 0x%x\n", lval);
- val = (u8)lval;
- if (!(val & 0x80)) {
- if (val & 0x08)
- chip->lun_mode = DEFAULT_SINGLE;
- else
- chip->lun_mode = SD_MS_2LUN;
-
- if (val & 0x04)
- SET_SDIO_EXIST(chip);
- else
- CLR_SDIO_EXIST(chip);
-
- if (val & 0x02)
- chip->hw_bypass_sd = 0;
- else
- chip->hw_bypass_sd = 1;
-
- } else {
- SET_SDIO_EXIST(chip);
- chip->hw_bypass_sd = 0;
- }
-
- if (chip->use_hw_setting) {
- u8 clk;
-
- chip->aspm_l0s_l1_en = (val >> 5) & 0x03;
-
- val = (u8)(lval >> 8);
-
- clk = (val >> 5) & 0x07;
- if (clk != 0x07)
- chip->asic_sd_sdr50_clk = 98 - clk * 2;
-
- if (val & 0x10)
- chip->auto_delink_en = 1;
- else
- chip->auto_delink_en = 0;
-
- if (chip->ss_en == 2) {
- chip->ss_en = 0;
- } else {
- if (val & 0x08)
- chip->ss_en = 1;
- else
- chip->ss_en = 0;
- }
-
- clk = val & 0x07;
- if (clk != 0x07)
- chip->asic_ms_hg_clk = (59 - clk) * 2;
-
- val = (u8)(lval >> 16);
-
- clk = (val >> 6) & 0x03;
- if (clk != 0x03) {
- chip->asic_sd_hs_clk = (49 - clk * 2) * 2;
- chip->asic_mmc_52m_clk = (49 - clk * 2) * 2;
- }
-
- clk = (val >> 4) & 0x03;
- if (clk != 0x03)
- chip->asic_sd_ddr50_clk = (48 - clk * 2) * 2;
-
- if (val & 0x01)
- chip->sdr104_en = 1;
- else
- chip->sdr104_en = 0;
-
- if (val & 0x02)
- chip->ddr50_en = 1;
- else
- chip->ddr50_en = 0;
-
- if (val & 0x04)
- chip->sdr50_en = 1;
- else
- chip->sdr50_en = 0;
-
-
- val = (u8)(lval >> 24);
-
- clk = (val >> 5) & 0x07;
- if (clk != 0x07)
- chip->asic_sd_sdr104_clk = 206 - clk * 3;
-
- if (val & 0x10)
- chip->power_down_in_ss = 1;
- else
- chip->power_down_in_ss = 0;
-
- chip->ms_power_class_en = val & 0x03;
- }
-
- if (chip->hp_watch_bios_hotplug && chip->auto_delink_en) {
- u8 reg58, reg5b;
-
- retval = rtsx_read_pci_cfg_byte(0x00,
- 0x1C, 0x02, 0x58, ®58);
- if (retval < 0)
- return STATUS_SUCCESS;
-
- retval = rtsx_read_pci_cfg_byte(0x00,
- 0x1C, 0x02, 0x5B, ®5b);
- if (retval < 0)
- return STATUS_SUCCESS;
-
- RTSX_DEBUGP("reg58 = 0x%x, reg5b = 0x%x\n", reg58, reg5b);
-
- if ((reg58 == 0x00) && (reg5b == 0x01))
- chip->auto_delink_en = 0;
-
- }
-
- return STATUS_SUCCESS;
-}
-
-static int rts5208_init(struct rtsx_chip *chip)
-{
- int retval;
- u16 reg = 0;
- u8 val = 0;
-
- RTSX_WRITE_REG(chip, CLK_SEL, 0x03, 0x03);
- RTSX_READ_REG(chip, CLK_SEL, &val);
- if (val == 0)
- chip->asic_code = 1;
- else
- chip->asic_code = 0;
-
- if (chip->asic_code) {
- retval = rtsx_read_phy_register(chip, 0x1C, ®);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- RTSX_DEBUGP("Value of phy register 0x1C is 0x%x\n", reg);
- chip->ic_version = (reg >> 4) & 0x07;
- if (reg & PHY_DEBUG_MODE)
- chip->phy_debug_mode = 1;
- else
- chip->phy_debug_mode = 0;
-
- } else {
- RTSX_READ_REG(chip, 0xFE80, &val);
- chip->ic_version = val;
- chip->phy_debug_mode = 0;
- }
-
- RTSX_READ_REG(chip, PDINFO, &val);
- RTSX_DEBUGP("PDINFO: 0x%x\n", val);
- if (val & AUX_PWR_DETECTED)
- chip->aux_pwr_exist = 1;
- else
- chip->aux_pwr_exist = 0;
-
- RTSX_READ_REG(chip, 0xFE50, &val);
- if (val & 0x01)
- chip->hw_bypass_sd = 1;
- else
- chip->hw_bypass_sd = 0;
-
- rtsx_read_config_byte(chip, 0x0E, &val);
- if (val & 0x80)
- SET_SDIO_EXIST(chip);
- else
- CLR_SDIO_EXIST(chip);
-
- if (chip->use_hw_setting) {
- RTSX_READ_REG(chip, CHANGE_LINK_STATE, &val);
- if (val & 0x80)
- chip->auto_delink_en = 1;
- else
- chip->auto_delink_en = 0;
- }
-
- return STATUS_SUCCESS;
-}
-
-static int rts5288_init(struct rtsx_chip *chip)
-{
- int retval;
- u8 val = 0, max_func;
- u32 lval = 0;
-
- RTSX_WRITE_REG(chip, CLK_SEL, 0x03, 0x03);
- RTSX_READ_REG(chip, CLK_SEL, &val);
- if (val == 0)
- chip->asic_code = 1;
- else
- chip->asic_code = 0;
-
- chip->ic_version = 0;
- chip->phy_debug_mode = 0;
-
- RTSX_READ_REG(chip, PDINFO, &val);
- RTSX_DEBUGP("PDINFO: 0x%x\n", val);
- if (val & AUX_PWR_DETECTED)
- chip->aux_pwr_exist = 1;
- else
- chip->aux_pwr_exist = 0;
-
- RTSX_READ_REG(chip, CARD_SHARE_MODE, &val);
- RTSX_DEBUGP("CARD_SHARE_MODE: 0x%x\n", val);
- if (val & 0x04)
- chip->baro_pkg = QFN;
- else
- chip->baro_pkg = LQFP;
-
- RTSX_READ_REG(chip, 0xFE5A, &val);
- if (val & 0x10)
- chip->hw_bypass_sd = 1;
- else
- chip->hw_bypass_sd = 0;
-
- retval = rtsx_read_cfg_dw(chip, 0, 0x718, &lval);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- max_func = (u8)((lval >> 29) & 0x07);
- RTSX_DEBUGP("Max function number: %d\n", max_func);
- if (max_func == 0x02)
- SET_SDIO_EXIST(chip);
- else
- CLR_SDIO_EXIST(chip);
-
- if (chip->use_hw_setting) {
- RTSX_READ_REG(chip, CHANGE_LINK_STATE, &val);
- if (val & 0x80)
- chip->auto_delink_en = 1;
- else
- chip->auto_delink_en = 0;
-
- if (CHECK_BARO_PKG(chip, LQFP))
- chip->lun_mode = SD_MS_1LUN;
- else
- chip->lun_mode = DEFAULT_SINGLE;
-
- }
-
- return STATUS_SUCCESS;
-}
-
-int rtsx_init_chip(struct rtsx_chip *chip)
-{
- struct sd_info *sd_card = &(chip->sd_card);
- struct xd_info *xd_card = &(chip->xd_card);
- struct ms_info *ms_card = &(chip->ms_card);
- int retval;
- unsigned int i;
-
- RTSX_DEBUGP("Vendor ID: 0x%04x, Product ID: 0x%04x\n",
- chip->vendor_id, chip->product_id);
-
- chip->ic_version = 0;
-
-#ifdef _MSG_TRACE
- chip->msg_idx = 0;
-#endif
-
- memset(xd_card, 0, sizeof(struct xd_info));
- memset(sd_card, 0, sizeof(struct sd_info));
- memset(ms_card, 0, sizeof(struct ms_info));
-
- chip->xd_reset_counter = 0;
- chip->sd_reset_counter = 0;
- chip->ms_reset_counter = 0;
-
- chip->xd_show_cnt = MAX_SHOW_CNT;
- chip->sd_show_cnt = MAX_SHOW_CNT;
- chip->ms_show_cnt = MAX_SHOW_CNT;
-
- chip->sd_io = 0;
- chip->auto_delink_cnt = 0;
- chip->auto_delink_allowed = 1;
- rtsx_set_stat(chip, RTSX_STAT_INIT);
-
- chip->aspm_enabled = 0;
- chip->chip_insert_with_sdio = 0;
- chip->sdio_aspm = 0;
- chip->sdio_idle = 0;
- chip->sdio_counter = 0;
- chip->cur_card = 0;
- chip->phy_debug_mode = 0;
- chip->sdio_func_exist = 0;
- memset(chip->sdio_raw_data, 0, 12);
-
- for (i = 0; i < MAX_ALLOWED_LUN_CNT; i++) {
- set_sense_type(chip, i, SENSE_TYPE_NO_SENSE);
- chip->rw_fail_cnt[i] = 0;
- }
-
- if (!check_sd_speed_prior(chip->sd_speed_prior))
- chip->sd_speed_prior = 0x01040203;
-
- RTSX_DEBUGP("sd_speed_prior = 0x%08x\n", chip->sd_speed_prior);
-
- if (!check_sd_current_prior(chip->sd_current_prior))
- chip->sd_current_prior = 0x00010203;
-
- RTSX_DEBUGP("sd_current_prior = 0x%08x\n", chip->sd_current_prior);
-
- if ((chip->sd_ddr_tx_phase > 31) || (chip->sd_ddr_tx_phase < 0))
- chip->sd_ddr_tx_phase = 0;
-
- if ((chip->mmc_ddr_tx_phase > 31) || (chip->mmc_ddr_tx_phase < 0))
- chip->mmc_ddr_tx_phase = 0;
-
- RTSX_WRITE_REG(chip, FPDCTL, SSC_POWER_DOWN, 0);
- wait_timeout(200);
- RTSX_WRITE_REG(chip, CLK_DIV, 0x07, 0x07);
- RTSX_DEBUGP("chip->use_hw_setting = %d\n", chip->use_hw_setting);
-
- if (CHECK_PID(chip, 0x5209)) {
- retval = rts5209_init(chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- } else if (CHECK_PID(chip, 0x5208)) {
- retval = rts5208_init(chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- } else if (CHECK_PID(chip, 0x5288)) {
- retval = rts5288_init(chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- }
-
- if (chip->ss_en == 2)
- chip->ss_en = 0;
-
- RTSX_DEBUGP("chip->asic_code = %d\n", chip->asic_code);
- RTSX_DEBUGP("chip->ic_version = 0x%x\n", chip->ic_version);
- RTSX_DEBUGP("chip->phy_debug_mode = %d\n", chip->phy_debug_mode);
- RTSX_DEBUGP("chip->aux_pwr_exist = %d\n", chip->aux_pwr_exist);
- RTSX_DEBUGP("chip->sdio_func_exist = %d\n", chip->sdio_func_exist);
- RTSX_DEBUGP("chip->hw_bypass_sd = %d\n", chip->hw_bypass_sd);
- RTSX_DEBUGP("chip->aspm_l0s_l1_en = %d\n", chip->aspm_l0s_l1_en);
- RTSX_DEBUGP("chip->lun_mode = %d\n", chip->lun_mode);
- RTSX_DEBUGP("chip->auto_delink_en = %d\n", chip->auto_delink_en);
- RTSX_DEBUGP("chip->ss_en = %d\n", chip->ss_en);
- RTSX_DEBUGP("chip->baro_pkg = %d\n", chip->baro_pkg);
-
- if (CHECK_LUN_MODE(chip, SD_MS_2LUN)) {
- chip->card2lun[SD_CARD] = 0;
- chip->card2lun[MS_CARD] = 1;
- chip->card2lun[XD_CARD] = 0xFF;
- chip->lun2card[0] = SD_CARD;
- chip->lun2card[1] = MS_CARD;
- chip->max_lun = 1;
- SET_SDIO_IGNORED(chip);
- } else if (CHECK_LUN_MODE(chip, SD_MS_1LUN)) {
- chip->card2lun[SD_CARD] = 0;
- chip->card2lun[MS_CARD] = 0;
- chip->card2lun[XD_CARD] = 0xFF;
- chip->lun2card[0] = SD_CARD | MS_CARD;
- chip->max_lun = 0;
- } else {
- chip->card2lun[XD_CARD] = 0;
- chip->card2lun[SD_CARD] = 0;
- chip->card2lun[MS_CARD] = 0;
- chip->lun2card[0] = XD_CARD | SD_CARD | MS_CARD;
- chip->max_lun = 0;
- }
-
- retval = rtsx_reset_chip(chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- return STATUS_SUCCESS;
-}
-
-void rtsx_release_chip(struct rtsx_chip *chip)
-{
- xd_free_l2p_tbl(chip);
- ms_free_l2p_tbl(chip);
- chip->card_exist = 0;
- chip->card_ready = 0;
-}
-
-#if !defined(LED_AUTO_BLINK) && defined(REGULAR_BLINK)
-static inline void rtsx_blink_led(struct rtsx_chip *chip)
-{
- if (chip->card_exist && chip->blink_led) {
- if (chip->led_toggle_counter < LED_TOGGLE_INTERVAL) {
- chip->led_toggle_counter++;
- } else {
- chip->led_toggle_counter = 0;
- toggle_gpio(chip, LED_GPIO);
- }
- }
-}
-#endif
-
-static void rtsx_monitor_aspm_config(struct rtsx_chip *chip)
-{
- int maybe_support_aspm, reg_changed;
- u32 tmp = 0;
- u8 reg0 = 0, reg1 = 0;
-
- maybe_support_aspm = 0;
- reg_changed = 0;
- rtsx_read_config_byte(chip, LCTLR, ®0);
- if (chip->aspm_level[0] != reg0) {
- reg_changed = 1;
- chip->aspm_level[0] = reg0;
- }
- if (CHK_SDIO_EXIST(chip) && !CHK_SDIO_IGNORED(chip)) {
- rtsx_read_cfg_dw(chip, 1, 0xC0, &tmp);
- reg1 = (u8)tmp;
- if (chip->aspm_level[1] != reg1) {
- reg_changed = 1;
- chip->aspm_level[1] = reg1;
- }
-
- if ((reg0 & 0x03) && (reg1 & 0x03))
- maybe_support_aspm = 1;
-
- } else {
- if (reg0 & 0x03)
- maybe_support_aspm = 1;
-
- }
-
- if (reg_changed) {
- if (maybe_support_aspm)
- chip->aspm_l0s_l1_en = 0x03;
-
- RTSX_DEBUGP("aspm_level[0] = 0x%02x, aspm_level[1] = 0x%02x\n",
- chip->aspm_level[0], chip->aspm_level[1]);
-
- if (chip->aspm_l0s_l1_en) {
- chip->aspm_enabled = 1;
- } else {
- chip->aspm_enabled = 0;
- chip->sdio_aspm = 0;
- }
- rtsx_write_register(chip, ASPM_FORCE_CTL, 0xFF,
- 0x30 | chip->aspm_level[0] | (chip->aspm_level[1] << 2));
- }
-}
-
-void rtsx_polling_func(struct rtsx_chip *chip)
-{
-#ifdef SUPPORT_SD_LOCK
- struct sd_info *sd_card = &(chip->sd_card);
-#endif
- int ss_allowed;
-
- if (rtsx_chk_stat(chip, RTSX_STAT_SUSPEND))
- return;
-
- if (rtsx_chk_stat(chip, RTSX_STAT_DELINK))
- goto Delink_Stage;
-
- if (chip->polling_config) {
- u8 val;
- rtsx_read_config_byte(chip, 0, &val);
- }
-
- if (rtsx_chk_stat(chip, RTSX_STAT_SS))
- return;
-
-#ifdef SUPPORT_OCP
- if (chip->ocp_int) {
- rtsx_read_register(chip, OCPSTAT, &(chip->ocp_stat));
-
- if (CHECK_PID(chip, 0x5209) &&
- CHECK_LUN_MODE(chip, SD_MS_2LUN)) {
- if (chip->ocp_int & SD_OC_INT)
- sd_power_off_card3v3(chip);
- if (chip->ocp_int & MS_OC_INT)
- ms_power_off_card3v3(chip);
- } else {
- if (chip->card_exist & SD_CARD)
- sd_power_off_card3v3(chip);
- else if (chip->card_exist & MS_CARD)
- ms_power_off_card3v3(chip);
- else if (chip->card_exist & XD_CARD)
- xd_power_off_card3v3(chip);
-
- }
-
- chip->ocp_int = 0;
- }
-#endif
-
-#ifdef SUPPORT_SD_LOCK
- if (sd_card->sd_erase_status) {
- if (chip->card_exist & SD_CARD) {
- u8 val;
- if (CHECK_PID(chip, 0x5209)) {
- rtsx_read_register(chip, SD_BUS_STAT, &val);
- if (val & SD_DAT0_STATUS) {
- sd_card->sd_erase_status = SD_NOT_ERASE;
- sd_card->sd_lock_notify = 1;
- chip->need_reinit |= SD_CARD;
- }
- } else {
- rtsx_read_register(chip, 0xFD30, &val);
- if (val & 0x02) {
- sd_card->sd_erase_status = SD_NOT_ERASE;
- sd_card->sd_lock_notify = 1;
- chip->need_reinit |= SD_CARD;
- }
- }
- } else {
- sd_card->sd_erase_status = SD_NOT_ERASE;
- }
- }
-#endif
-
- rtsx_init_cards(chip);
-
- if (chip->ss_en) {
- ss_allowed = 1;
-
- if (CHECK_PID(chip, 0x5288)) {
- ss_allowed = 0;
- } else {
- if (CHK_SDIO_EXIST(chip) && !CHK_SDIO_IGNORED(chip)) {
- u32 val;
- rtsx_read_cfg_dw(chip, 1, 0x04, &val);
- if (val & 0x07)
- ss_allowed = 0;
-
- }
- }
- } else {
- ss_allowed = 0;
- }
-
- if (ss_allowed && !chip->sd_io) {
- if (rtsx_get_stat(chip) != RTSX_STAT_IDLE) {
- chip->ss_counter = 0;
- } else {
- if (chip->ss_counter <
- (chip->ss_idle_period / POLLING_INTERVAL)) {
- chip->ss_counter++;
- } else {
- rtsx_exclusive_enter_ss(chip);
- return;
- }
- }
- }
-
- if (CHECK_PID(chip, 0x5208)) {
- rtsx_monitor_aspm_config(chip);
-
-#ifdef SUPPORT_SDIO_ASPM
- if (CHK_SDIO_EXIST(chip) && !CHK_SDIO_IGNORED(chip) &&
- chip->aspm_l0s_l1_en && chip->dynamic_aspm) {
- if (chip->sd_io) {
- dynamic_configure_sdio_aspm(chip);
- } else {
- if (!chip->sdio_aspm) {
- RTSX_DEBUGP("SDIO enter ASPM!\n");
- rtsx_write_register(chip,
- ASPM_FORCE_CTL, 0xFC,
- 0x30 | (chip->aspm_level[1] << 2));
- chip->sdio_aspm = 1;
- }
- }
- }
-#endif
- }
-
- if (chip->idle_counter < IDLE_MAX_COUNT) {
- chip->idle_counter++;
- } else {
- if (rtsx_get_stat(chip) != RTSX_STAT_IDLE) {
- RTSX_DEBUGP("Idle state!\n");
- rtsx_set_stat(chip, RTSX_STAT_IDLE);
-
-#if !defined(LED_AUTO_BLINK) && defined(REGULAR_BLINK)
- chip->led_toggle_counter = 0;
-#endif
- rtsx_force_power_on(chip, SSC_PDCTL);
-
- turn_off_led(chip, LED_GPIO);
-
- if (chip->auto_power_down && !chip->card_ready && !chip->sd_io)
- rtsx_force_power_down(chip, SSC_PDCTL | OC_PDCTL);
-
- }
- }
-
- switch (rtsx_get_stat(chip)) {
- case RTSX_STAT_RUN:
-#if !defined(LED_AUTO_BLINK) && defined(REGULAR_BLINK)
- rtsx_blink_led(chip);
-#endif
- do_remaining_work(chip);
- break;
-
- case RTSX_STAT_IDLE:
- if (chip->sd_io && !chip->sd_int)
- try_to_switch_sdio_ctrl(chip);
-
- rtsx_enable_aspm(chip);
- break;
-
- default:
- break;
- }
-
-
-#ifdef SUPPORT_OCP
- if (CHECK_LUN_MODE(chip, SD_MS_2LUN)) {
-#ifdef CONFIG_RTS_PSTOR_DEBUG
- if (chip->ocp_stat & (SD_OC_NOW | SD_OC_EVER | MS_OC_NOW | MS_OC_EVER))
- RTSX_DEBUGP("Over current, OCPSTAT is 0x%x\n", chip->ocp_stat);
-#endif
-
- if (chip->ocp_stat & (SD_OC_NOW | SD_OC_EVER)) {
- if (chip->card_exist & SD_CARD) {
- rtsx_write_register(chip, CARD_OE, SD_OUTPUT_EN, 0);
- card_power_off(chip, SD_CARD);
- chip->card_fail |= SD_CARD;
- }
- }
- if (chip->ocp_stat & (MS_OC_NOW | MS_OC_EVER)) {
- if (chip->card_exist & MS_CARD) {
- rtsx_write_register(chip, CARD_OE, MS_OUTPUT_EN, 0);
- card_power_off(chip, MS_CARD);
- chip->card_fail |= MS_CARD;
- }
- }
- } else {
- if (chip->ocp_stat & (SD_OC_NOW | SD_OC_EVER)) {
- RTSX_DEBUGP("Over current, OCPSTAT is 0x%x\n", chip->ocp_stat);
- if (chip->card_exist & SD_CARD) {
- rtsx_write_register(chip, CARD_OE, SD_OUTPUT_EN, 0);
- chip->card_fail |= SD_CARD;
- } else if (chip->card_exist & MS_CARD) {
- rtsx_write_register(chip, CARD_OE, MS_OUTPUT_EN, 0);
- chip->card_fail |= MS_CARD;
- } else if (chip->card_exist & XD_CARD) {
- rtsx_write_register(chip, CARD_OE, XD_OUTPUT_EN, 0);
- chip->card_fail |= XD_CARD;
- }
- card_power_off(chip, SD_CARD);
- }
- }
-#endif
-
-Delink_Stage:
- if (chip->auto_delink_en && chip->auto_delink_allowed &&
- !chip->card_ready && !chip->card_ejected && !chip->sd_io) {
- int enter_L1 = chip->auto_delink_in_L1 && (chip->aspm_l0s_l1_en || chip->ss_en);
- int delink_stage1_cnt = chip->delink_stage1_step;
- int delink_stage2_cnt = delink_stage1_cnt + chip->delink_stage2_step;
- int delink_stage3_cnt = delink_stage2_cnt + chip->delink_stage3_step;
-
- if (chip->auto_delink_cnt <= delink_stage3_cnt) {
- if (chip->auto_delink_cnt == delink_stage1_cnt) {
- rtsx_set_stat(chip, RTSX_STAT_DELINK);
-
- if (chip->asic_code && CHECK_PID(chip, 0x5208))
- rtsx_set_phy_reg_bit(chip, 0x1C, 2);
-
- if (chip->card_exist) {
- RTSX_DEBUGP("False card inserted, do force delink\n");
-
- if (enter_L1)
- rtsx_write_register(chip, HOST_SLEEP_STATE, 0x03, 1);
-
- rtsx_write_register(chip, CHANGE_LINK_STATE, 0x0A, 0x0A);
-
- if (enter_L1)
- rtsx_enter_L1(chip);
-
- chip->auto_delink_cnt = delink_stage3_cnt + 1;
- } else {
- RTSX_DEBUGP("No card inserted, do delink\n");
-
- if (enter_L1)
- rtsx_write_register(chip, HOST_SLEEP_STATE, 0x03, 1);
-
-#ifdef HW_INT_WRITE_CLR
- if (CHECK_PID(chip, 0x5209)) {
- rtsx_writel(chip, RTSX_BIPR, 0xFFFFFFFF);
- RTSX_DEBUGP("RTSX_BIPR: 0x%x\n", rtsx_readl(chip, RTSX_BIPR));
- }
-#endif
- rtsx_write_register(chip, CHANGE_LINK_STATE, 0x02, 0x02);
-
- if (enter_L1)
- rtsx_enter_L1(chip);
-
- }
- }
-
- if (chip->auto_delink_cnt == delink_stage2_cnt) {
- RTSX_DEBUGP("Try to do force delink\n");
-
- if (enter_L1)
- rtsx_exit_L1(chip);
-
- if (chip->asic_code && CHECK_PID(chip, 0x5208))
- rtsx_set_phy_reg_bit(chip, 0x1C, 2);
-
- rtsx_write_register(chip, CHANGE_LINK_STATE, 0x0A, 0x0A);
- }
-
- chip->auto_delink_cnt++;
- }
- } else {
- chip->auto_delink_cnt = 0;
- }
-}
-
-void rtsx_undo_delink(struct rtsx_chip *chip)
-{
- chip->auto_delink_allowed = 0;
- rtsx_write_register(chip, CHANGE_LINK_STATE, 0x0A, 0x00);
-}
-
-/**
- * rtsx_stop_cmd - stop command transfer and DMA transfer
- * @chip: Realtek's card reader chip
- * @card: flash card type
- *
- * Stop command transfer and DMA transfer.
- * This function is called in error handler.
- */
-void rtsx_stop_cmd(struct rtsx_chip *chip, int card)
-{
- int i;
-
- for (i = 0; i <= 8; i++) {
- int addr = RTSX_HCBAR + i * 4;
- u32 reg;
- reg = rtsx_readl(chip, addr);
- RTSX_DEBUGP("BAR (0x%02x): 0x%08x\n", addr, reg);
- }
- rtsx_writel(chip, RTSX_HCBCTLR, STOP_CMD);
- rtsx_writel(chip, RTSX_HDBCTLR, STOP_DMA);
-
- for (i = 0; i < 16; i++) {
- u16 addr = 0xFE20 + (u16)i;
- u8 val;
- rtsx_read_register(chip, addr, &val);
- RTSX_DEBUGP("0x%04X: 0x%02x\n", addr, val);
- }
-
- rtsx_write_register(chip, DMACTL, 0x80, 0x80);
- rtsx_write_register(chip, RBCTL, 0x80, 0x80);
-}
-
-#define MAX_RW_REG_CNT 1024
-
-int rtsx_write_register(struct rtsx_chip *chip, u16 addr, u8 mask, u8 data)
-{
- int i;
- u32 val = 3 << 30;
-
- val |= (u32)(addr & 0x3FFF) << 16;
- val |= (u32)mask << 8;
- val |= (u32)data;
-
- rtsx_writel(chip, RTSX_HAIMR, val);
-
- for (i = 0; i < MAX_RW_REG_CNT; i++) {
- val = rtsx_readl(chip, RTSX_HAIMR);
- if ((val & (1 << 31)) == 0) {
- if (data != (u8)val)
- TRACE_RET(chip, STATUS_FAIL);
-
- return STATUS_SUCCESS;
- }
- }
-
- TRACE_RET(chip, STATUS_TIMEDOUT);
-}
-
-int rtsx_read_register(struct rtsx_chip *chip, u16 addr, u8 *data)
-{
- u32 val = 2 << 30;
- int i;
-
- if (data)
- *data = 0;
-
- val |= (u32)(addr & 0x3FFF) << 16;
-
- rtsx_writel(chip, RTSX_HAIMR, val);
-
- for (i = 0; i < MAX_RW_REG_CNT; i++) {
- val = rtsx_readl(chip, RTSX_HAIMR);
- if ((val & (1 << 31)) == 0)
- break;
- }
-
- if (i >= MAX_RW_REG_CNT)
- TRACE_RET(chip, STATUS_TIMEDOUT);
-
- if (data)
- *data = (u8)(val & 0xFF);
-
- return STATUS_SUCCESS;
-}
-
-int rtsx_write_cfg_dw(struct rtsx_chip *chip, u8 func_no, u16 addr, u32 mask, u32 val)
-{
- u8 mode = 0, tmp;
- int i;
-
- for (i = 0; i < 4; i++) {
- if (mask & 0xFF) {
- RTSX_WRITE_REG(chip, CFGDATA0 + i,
- 0xFF, (u8)(val & mask & 0xFF));
- mode |= (1 << i);
- }
- mask >>= 8;
- val >>= 8;
- }
-
- if (mode) {
- RTSX_WRITE_REG(chip, CFGADDR0, 0xFF, (u8)addr);
- RTSX_WRITE_REG(chip, CFGADDR1, 0xFF, (u8)(addr >> 8));
-
- RTSX_WRITE_REG(chip, CFGRWCTL, 0xFF,
- 0x80 | mode | ((func_no & 0x03) << 4));
-
- for (i = 0; i < MAX_RW_REG_CNT; i++) {
- RTSX_READ_REG(chip, CFGRWCTL, &tmp);
- if ((tmp & 0x80) == 0)
- break;
- }
- }
-
- return STATUS_SUCCESS;
-}
-
-int rtsx_read_cfg_dw(struct rtsx_chip *chip, u8 func_no, u16 addr, u32 *val)
-{
- int i;
- u8 tmp;
- u32 data = 0;
-
- RTSX_WRITE_REG(chip, CFGADDR0, 0xFF, (u8)addr);
- RTSX_WRITE_REG(chip, CFGADDR1, 0xFF, (u8)(addr >> 8));
- RTSX_WRITE_REG(chip, CFGRWCTL, 0xFF, 0x80 | ((func_no & 0x03) << 4));
-
- for (i = 0; i < MAX_RW_REG_CNT; i++) {
- RTSX_READ_REG(chip, CFGRWCTL, &tmp);
- if ((tmp & 0x80) == 0)
- break;
- }
-
- for (i = 0; i < 4; i++) {
- RTSX_READ_REG(chip, CFGDATA0 + i, &tmp);
- data |= (u32)tmp << (i * 8);
- }
-
- if (val)
- *val = data;
-
- return STATUS_SUCCESS;
-}
-
-int rtsx_write_cfg_seq(struct rtsx_chip *chip, u8 func, u16 addr, u8 *buf, int len)
-{
- u32 *data, *mask;
- u16 offset = addr % 4;
- u16 aligned_addr = addr - offset;
- int dw_len, i, j;
- int retval;
-
- RTSX_DEBUGP("%s\n", __func__);
-
- if (!buf)
- TRACE_RET(chip, STATUS_NOMEM);
-
- if ((len + offset) % 4)
- dw_len = (len + offset) / 4 + 1;
- else
- dw_len = (len + offset) / 4;
-
- RTSX_DEBUGP("dw_len = %d\n", dw_len);
-
- data = vzalloc(dw_len * 4);
- if (!data)
- TRACE_RET(chip, STATUS_NOMEM);
-
- mask = vzalloc(dw_len * 4);
- if (!mask) {
- vfree(data);
- TRACE_RET(chip, STATUS_NOMEM);
- }
-
- j = 0;
- for (i = 0; i < len; i++) {
- mask[j] |= 0xFF << (offset * 8);
- data[j] |= buf[i] << (offset * 8);
- if (++offset == 4) {
- j++;
- offset = 0;
- }
- }
-
- RTSX_DUMP(mask, dw_len * 4);
- RTSX_DUMP(data, dw_len * 4);
-
- for (i = 0; i < dw_len; i++) {
- retval = rtsx_write_cfg_dw(chip, func, aligned_addr + i * 4, mask[i], data[i]);
- if (retval != STATUS_SUCCESS) {
- vfree(data);
- vfree(mask);
- TRACE_RET(chip, STATUS_FAIL);
- }
- }
-
- vfree(data);
- vfree(mask);
-
- return STATUS_SUCCESS;
-}
-
-int rtsx_read_cfg_seq(struct rtsx_chip *chip, u8 func, u16 addr, u8 *buf, int len)
-{
- u32 *data;
- u16 offset = addr % 4;
- u16 aligned_addr = addr - offset;
- int dw_len, i, j;
- int retval;
-
- RTSX_DEBUGP("%s\n", __func__);
-
- if ((len + offset) % 4)
- dw_len = (len + offset) / 4 + 1;
- else
- dw_len = (len + offset) / 4;
-
- RTSX_DEBUGP("dw_len = %d\n", dw_len);
-
- data = (u32 *)vmalloc(dw_len * 4);
- if (!data)
- TRACE_RET(chip, STATUS_NOMEM);
-
- for (i = 0; i < dw_len; i++) {
- retval = rtsx_read_cfg_dw(chip, func, aligned_addr + i * 4, data + i);
- if (retval != STATUS_SUCCESS) {
- vfree(data);
- TRACE_RET(chip, STATUS_FAIL);
- }
- }
-
- if (buf) {
- j = 0;
-
- for (i = 0; i < len; i++) {
- buf[i] = (u8)(data[j] >> (offset * 8));
- if (++offset == 4) {
- j++;
- offset = 0;
- }
- }
- }
-
- vfree(data);
-
- return STATUS_SUCCESS;
-}
-
-int rtsx_write_phy_register(struct rtsx_chip *chip, u8 addr, u16 val)
-{
- int i, finished = 0;
- u8 tmp;
-
- RTSX_WRITE_REG(chip, PHYDATA0, 0xFF, (u8)val);
- RTSX_WRITE_REG(chip, PHYDATA1, 0xFF, (u8)(val >> 8));
- RTSX_WRITE_REG(chip, PHYADDR, 0xFF, addr);
- RTSX_WRITE_REG(chip, PHYRWCTL, 0xFF, 0x81);
-
- for (i = 0; i < 100000; i++) {
- RTSX_READ_REG(chip, PHYRWCTL, &tmp);
- if (!(tmp & 0x80)) {
- finished = 1;
- break;
- }
- }
-
- if (!finished)
- TRACE_RET(chip, STATUS_FAIL);
-
- return STATUS_SUCCESS;
-}
-
-int rtsx_read_phy_register(struct rtsx_chip *chip, u8 addr, u16 *val)
-{
- int i, finished = 0;
- u16 data = 0;
- u8 tmp;
-
- RTSX_WRITE_REG(chip, PHYADDR, 0xFF, addr);
- RTSX_WRITE_REG(chip, PHYRWCTL, 0xFF, 0x80);
-
- for (i = 0; i < 100000; i++) {
- RTSX_READ_REG(chip, PHYRWCTL, &tmp);
- if (!(tmp & 0x80)) {
- finished = 1;
- break;
- }
- }
-
- if (!finished)
- TRACE_RET(chip, STATUS_FAIL);
-
- RTSX_READ_REG(chip, PHYDATA0, &tmp);
- data = tmp;
- RTSX_READ_REG(chip, PHYDATA1, &tmp);
- data |= (u16)tmp << 8;
-
- if (val)
- *val = data;
-
- return STATUS_SUCCESS;
-}
-
-int rtsx_read_efuse(struct rtsx_chip *chip, u8 addr, u8 *val)
-{
- int i;
- u8 data = 0;
-
- RTSX_WRITE_REG(chip, EFUSE_CTRL, 0xFF, 0x80|addr);
-
- for (i = 0; i < 100; i++) {
- RTSX_READ_REG(chip, EFUSE_CTRL, &data);
- if (!(data & 0x80))
- break;
- udelay(1);
- }
-
- if (data & 0x80)
- TRACE_RET(chip, STATUS_TIMEDOUT);
-
- RTSX_READ_REG(chip, EFUSE_DATA, &data);
- if (val)
- *val = data;
-
- return STATUS_SUCCESS;
-}
-
-int rtsx_write_efuse(struct rtsx_chip *chip, u8 addr, u8 val)
-{
- int i, j;
- u8 data = 0, tmp = 0xFF;
-
- for (i = 0; i < 8; i++) {
- if (val & (u8)(1 << i))
- continue;
-
- tmp &= (~(u8)(1 << i));
- RTSX_DEBUGP("Write 0x%x to 0x%x\n", tmp, addr);
-
- RTSX_WRITE_REG(chip, EFUSE_DATA, 0xFF, tmp);
- RTSX_WRITE_REG(chip, EFUSE_CTRL, 0xFF, 0xA0|addr);
-
- for (j = 0; j < 100; j++) {
- RTSX_READ_REG(chip, EFUSE_CTRL, &data);
- if (!(data & 0x80))
- break;
- wait_timeout(3);
- }
-
- if (data & 0x80)
- TRACE_RET(chip, STATUS_TIMEDOUT);
-
- wait_timeout(5);
- }
-
- return STATUS_SUCCESS;
-}
-
-int rtsx_clr_phy_reg_bit(struct rtsx_chip *chip, u8 reg, u8 bit)
-{
- int retval;
- u16 value;
-
- retval = rtsx_read_phy_register(chip, reg, &value);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- if (value & (1 << bit)) {
- value &= ~(1 << bit);
- retval = rtsx_write_phy_register(chip, reg, value);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- return STATUS_SUCCESS;
-}
-
-int rtsx_set_phy_reg_bit(struct rtsx_chip *chip, u8 reg, u8 bit)
-{
- int retval;
- u16 value;
-
- retval = rtsx_read_phy_register(chip, reg, &value);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- if (0 == (value & (1 << bit))) {
- value |= (1 << bit);
- retval = rtsx_write_phy_register(chip, reg, value);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- return STATUS_SUCCESS;
-}
-
-int rtsx_check_link_ready(struct rtsx_chip *chip)
-{
- u8 val;
-
- RTSX_READ_REG(chip, IRQSTAT0, &val);
-
- RTSX_DEBUGP("IRQSTAT0: 0x%x\n", val);
- if (val & LINK_RDY_INT) {
- RTSX_DEBUGP("Delinked!\n");
- rtsx_write_register(chip, IRQSTAT0, LINK_RDY_INT, LINK_RDY_INT);
- return STATUS_FAIL;
- }
-
- return STATUS_SUCCESS;
-}
-
-static void rtsx_handle_pm_dstate(struct rtsx_chip *chip, u8 dstate)
-{
- u32 ultmp;
-
- RTSX_DEBUGP("%04x set pm_dstate to %d\n", chip->product_id, dstate);
-
- if (CHK_SDIO_EXIST(chip)) {
- u8 func_no;
-
- if (CHECK_PID(chip, 0x5288))
- func_no = 2;
- else
- func_no = 1;
-
- rtsx_read_cfg_dw(chip, func_no, 0x84, &ultmp);
- RTSX_DEBUGP("pm_dstate of function %d: 0x%x\n", (int)func_no, ultmp);
- rtsx_write_cfg_dw(chip, func_no, 0x84, 0xFF, dstate);
- }
-
- rtsx_write_config_byte(chip, 0x44, dstate);
- rtsx_write_config_byte(chip, 0x45, 0);
-}
-
-void rtsx_enter_L1(struct rtsx_chip *chip)
-{
- rtsx_handle_pm_dstate(chip, 2);
-}
-
-void rtsx_exit_L1(struct rtsx_chip *chip)
-{
- rtsx_write_config_byte(chip, 0x44, 0);
- rtsx_write_config_byte(chip, 0x45, 0);
-}
-
-void rtsx_enter_ss(struct rtsx_chip *chip)
-{
- RTSX_DEBUGP("Enter Selective Suspend State!\n");
-
- rtsx_write_register(chip, IRQSTAT0, LINK_RDY_INT, LINK_RDY_INT);
-
- if (chip->power_down_in_ss) {
- rtsx_power_off_card(chip);
- rtsx_force_power_down(chip, SSC_PDCTL | OC_PDCTL);
- }
-
- if (CHK_SDIO_EXIST(chip)) {
- if (CHECK_PID(chip, 0x5288))
- rtsx_write_cfg_dw(chip, 2, 0xC0, 0xFF00, 0x0100);
- else
- rtsx_write_cfg_dw(chip, 1, 0xC0, 0xFF00, 0x0100);
- }
-
- if (chip->auto_delink_en) {
- rtsx_write_register(chip, HOST_SLEEP_STATE, 0x01, 0x01);
- } else {
- if (!chip->phy_debug_mode) {
- u32 tmp;
- tmp = rtsx_readl(chip, RTSX_BIER);
- tmp |= CARD_INT;
- rtsx_writel(chip, RTSX_BIER, tmp);
- }
-
- rtsx_write_register(chip, CHANGE_LINK_STATE, 0x02, 0);
- }
-
- rtsx_enter_L1(chip);
-
- RTSX_CLR_DELINK(chip);
- rtsx_set_stat(chip, RTSX_STAT_SS);
-}
-
-void rtsx_exit_ss(struct rtsx_chip *chip)
-{
- RTSX_DEBUGP("Exit Selective Suspend State!\n");
-
- rtsx_exit_L1(chip);
-
- if (chip->power_down_in_ss) {
- rtsx_force_power_on(chip, SSC_PDCTL | OC_PDCTL);
- udelay(1000);
- }
-
- if (RTSX_TST_DELINK(chip)) {
- chip->need_reinit = SD_CARD | MS_CARD | XD_CARD;
- rtsx_reinit_cards(chip, 1);
- RTSX_CLR_DELINK(chip);
- } else if (chip->power_down_in_ss) {
- chip->need_reinit = SD_CARD | MS_CARD | XD_CARD;
- rtsx_reinit_cards(chip, 0);
- }
-}
-
-int rtsx_pre_handle_interrupt(struct rtsx_chip *chip)
-{
- u32 status, int_enable;
- int exit_ss = 0;
-#ifdef SUPPORT_OCP
- u32 ocp_int = 0;
-
- if (CHECK_PID(chip, 0x5209)) {
- if (CHECK_LUN_MODE(chip, SD_MS_2LUN))
- ocp_int = MS_OC_INT | SD_OC_INT;
- else
- ocp_int = SD_OC_INT;
-
- } else {
- ocp_int = OC_INT;
- }
-#endif
-
- if (chip->ss_en) {
- chip->ss_counter = 0;
- if (rtsx_get_stat(chip) == RTSX_STAT_SS) {
- exit_ss = 1;
- rtsx_exit_L1(chip);
- rtsx_set_stat(chip, RTSX_STAT_RUN);
- }
- }
-
- int_enable = rtsx_readl(chip, RTSX_BIER);
- chip->int_reg = rtsx_readl(chip, RTSX_BIPR);
-
-#ifdef HW_INT_WRITE_CLR
- if (CHECK_PID(chip, 0x5209))
- rtsx_writel(chip, RTSX_BIPR, chip->int_reg);
-#endif
-
- if (((chip->int_reg & int_enable) == 0) || (chip->int_reg == 0xFFFFFFFF))
- return STATUS_FAIL;
-
- if (!chip->msi_en) {
- if (CHECK_PID(chip, 0x5209)) {
- u8 val;
- rtsx_read_config_byte(chip, 0x05, &val);
- if (val & 0x04)
- return STATUS_FAIL;
- }
- }
-
- status = chip->int_reg &= (int_enable | 0x7FFFFF);
-
- if (status & CARD_INT) {
- chip->auto_delink_cnt = 0;
-
- if (status & SD_INT) {
- if (status & SD_EXIST) {
- set_bit(SD_NR, &(chip->need_reset));
- } else {
- set_bit(SD_NR, &(chip->need_release));
- chip->sd_reset_counter = 0;
- chip->sd_show_cnt = 0;
- clear_bit(SD_NR, &(chip->need_reset));
- }
- } else {
- /* If multi-luns, it's possible that
- when plugging/unplugging one card
- there is another card which still
- exists in the slot. In this case,
- all existed cards should be reset.
- */
- if (exit_ss && (status & SD_EXIST))
- set_bit(SD_NR, &(chip->need_reinit));
- }
- if (!CHECK_PID(chip, 0x5288) || CHECK_BARO_PKG(chip, QFN)) {
- if (status & XD_INT) {
- if (status & XD_EXIST) {
- set_bit(XD_NR, &(chip->need_reset));
- } else {
- set_bit(XD_NR, &(chip->need_release));
- chip->xd_reset_counter = 0;
- chip->xd_show_cnt = 0;
- clear_bit(XD_NR, &(chip->need_reset));
- }
- } else {
- if (exit_ss && (status & XD_EXIST))
- set_bit(XD_NR, &(chip->need_reinit));
- }
- }
- if (status & MS_INT) {
- if (status & MS_EXIST) {
- set_bit(MS_NR, &(chip->need_reset));
- } else {
- set_bit(MS_NR, &(chip->need_release));
- chip->ms_reset_counter = 0;
- chip->ms_show_cnt = 0;
- clear_bit(MS_NR, &(chip->need_reset));
- }
- } else {
- if (exit_ss && (status & MS_EXIST))
- set_bit(MS_NR, &(chip->need_reinit));
- }
- }
-
-#ifdef SUPPORT_OCP
- chip->ocp_int = ocp_int & status;
-#endif
-
- if (chip->sd_io) {
- if (chip->int_reg & DATA_DONE_INT)
- chip->int_reg &= ~(u32)DATA_DONE_INT;
- }
-
- return STATUS_SUCCESS;
-}
-
-void rtsx_do_before_power_down(struct rtsx_chip *chip, int pm_stat)
-{
- int retval;
-
- RTSX_DEBUGP("rtsx_do_before_power_down, pm_stat = %d\n", pm_stat);
-
- rtsx_set_stat(chip, RTSX_STAT_SUSPEND);
-
- retval = rtsx_force_power_on(chip, SSC_PDCTL);
- if (retval != STATUS_SUCCESS)
- return;
-
- rtsx_release_cards(chip);
- rtsx_disable_bus_int(chip);
- turn_off_led(chip, LED_GPIO);
-
-#ifdef HW_AUTO_SWITCH_SD_BUS
- if (chip->sd_io) {
- chip->sdio_in_charge = 1;
- if (CHECK_PID(chip, 0x5208)) {
- rtsx_write_register(chip, TLPTISTAT, 0x08, 0x08);
- /* Enable sdio_bus_auto_switch */
- rtsx_write_register(chip, 0xFE70, 0x80, 0x80);
- } else if (CHECK_PID(chip, 0x5288)) {
- rtsx_write_register(chip, TLPTISTAT, 0x08, 0x08);
- /* Enable sdio_bus_auto_switch */
- rtsx_write_register(chip, 0xFE5A, 0x08, 0x08);
- } else if (CHECK_PID(chip, 0x5209)) {
- rtsx_write_register(chip, TLPTISTAT, 0x10, 0x10);
- /* Enable sdio_bus_auto_switch */
- rtsx_write_register(chip, SDIO_CFG, SDIO_BUS_AUTO_SWITCH, SDIO_BUS_AUTO_SWITCH);
- }
- }
-#endif
-
- if (CHECK_PID(chip, 0x5208) && (chip->ic_version >= IC_VER_D)) {
- /* u_force_clkreq_0 */
- rtsx_write_register(chip, PETXCFG, 0x08, 0x08);
- } else if (CHECK_PID(chip, 0x5209)) {
- /* u_force_clkreq_0 */
- rtsx_write_register(chip, PETXCFG, 0x08, 0x08);
- }
-
- if (pm_stat == PM_S1) {
- RTSX_DEBUGP("Host enter S1\n");
- rtsx_write_register(chip, HOST_SLEEP_STATE, 0x03, HOST_ENTER_S1);
- } else if (pm_stat == PM_S3) {
- if (chip->s3_pwr_off_delay > 0)
- wait_timeout(chip->s3_pwr_off_delay);
-
- RTSX_DEBUGP("Host enter S3\n");
- rtsx_write_register(chip, HOST_SLEEP_STATE, 0x03, HOST_ENTER_S3);
- }
-
- if (chip->do_delink_before_power_down && chip->auto_delink_en)
- rtsx_write_register(chip, CHANGE_LINK_STATE, 0x02, 2);
-
- rtsx_force_power_down(chip, SSC_PDCTL | OC_PDCTL);
-
- chip->cur_clk = 0;
- chip->cur_card = 0;
- chip->card_exist = 0;
-}
-
-void rtsx_enable_aspm(struct rtsx_chip *chip)
-{
- if (chip->aspm_l0s_l1_en && chip->dynamic_aspm) {
- if (!chip->aspm_enabled) {
- RTSX_DEBUGP("Try to enable ASPM\n");
- chip->aspm_enabled = 1;
-
- if (chip->asic_code && CHECK_PID(chip, 0x5208))
- rtsx_write_phy_register(chip, 0x07, 0);
- if (CHECK_PID(chip, 0x5208)) {
- rtsx_write_register(chip, ASPM_FORCE_CTL, 0xF3,
- 0x30 | chip->aspm_level[0]);
- } else {
- rtsx_write_config_byte(chip, LCTLR, chip->aspm_l0s_l1_en);
- }
-
- if (CHK_SDIO_EXIST(chip)) {
- u16 val = chip->aspm_l0s_l1_en | 0x0100;
- if (CHECK_PID(chip, 0x5288))
- rtsx_write_cfg_dw(chip, 2, 0xC0, 0xFFFF, val);
- else
- rtsx_write_cfg_dw(chip, 1, 0xC0, 0xFFFF, val);
- }
- }
- }
-
- return;
-}
-
-void rtsx_disable_aspm(struct rtsx_chip *chip)
-{
- if (CHECK_PID(chip, 0x5208))
- rtsx_monitor_aspm_config(chip);
-
- if (chip->aspm_l0s_l1_en && chip->dynamic_aspm) {
- if (chip->aspm_enabled) {
- RTSX_DEBUGP("Try to disable ASPM\n");
- chip->aspm_enabled = 0;
-
- if (chip->asic_code && CHECK_PID(chip, 0x5208))
- rtsx_write_phy_register(chip, 0x07, 0x0129);
- if (CHECK_PID(chip, 0x5208))
- rtsx_write_register(chip, ASPM_FORCE_CTL, 0xF3, 0x30);
- else
- rtsx_write_config_byte(chip, LCTLR, 0x00);
-
- wait_timeout(1);
- }
- }
-
- return;
-}
-
-int rtsx_read_ppbuf(struct rtsx_chip *chip, u8 *buf, int buf_len)
-{
- int retval;
- int i, j;
- u16 reg_addr;
- u8 *ptr;
-
- if (!buf)
- TRACE_RET(chip, STATUS_ERROR);
-
- ptr = buf;
- reg_addr = PPBUF_BASE2;
- for (i = 0; i < buf_len/256; i++) {
- rtsx_init_cmd(chip);
-
- for (j = 0; j < 256; j++)
- rtsx_add_cmd(chip, READ_REG_CMD, reg_addr++, 0, 0);
-
- retval = rtsx_send_cmd(chip, 0, 250);
- if (retval < 0)
- TRACE_RET(chip, STATUS_FAIL);
-
- memcpy(ptr, rtsx_get_cmd_data(chip), 256);
- ptr += 256;
- }
-
- if (buf_len%256) {
- rtsx_init_cmd(chip);
-
- for (j = 0; j < buf_len%256; j++)
- rtsx_add_cmd(chip, READ_REG_CMD, reg_addr++, 0, 0);
-
- retval = rtsx_send_cmd(chip, 0, 250);
- if (retval < 0)
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- memcpy(ptr, rtsx_get_cmd_data(chip), buf_len%256);
-
- return STATUS_SUCCESS;
-}
-
-int rtsx_write_ppbuf(struct rtsx_chip *chip, u8 *buf, int buf_len)
-{
- int retval;
- int i, j;
- u16 reg_addr;
- u8 *ptr;
-
- if (!buf)
- TRACE_RET(chip, STATUS_ERROR);
-
- ptr = buf;
- reg_addr = PPBUF_BASE2;
- for (i = 0; i < buf_len/256; i++) {
- rtsx_init_cmd(chip);
-
- for (j = 0; j < 256; j++) {
- rtsx_add_cmd(chip, WRITE_REG_CMD, reg_addr++, 0xFF, *ptr);
- ptr++;
- }
-
- retval = rtsx_send_cmd(chip, 0, 250);
- if (retval < 0)
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- if (buf_len%256) {
- rtsx_init_cmd(chip);
-
- for (j = 0; j < buf_len%256; j++) {
- rtsx_add_cmd(chip, WRITE_REG_CMD, reg_addr++, 0xFF, *ptr);
- ptr++;
- }
-
- retval = rtsx_send_cmd(chip, 0, 250);
- if (retval < 0)
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- return STATUS_SUCCESS;
-}
-
-int rtsx_check_chip_exist(struct rtsx_chip *chip)
-{
- if (rtsx_readl(chip, 0) == 0xFFFFFFFF)
- TRACE_RET(chip, STATUS_FAIL);
-
- return STATUS_SUCCESS;
-}
-
-int rtsx_force_power_on(struct rtsx_chip *chip, u8 ctl)
-{
- int retval;
- u8 mask = 0;
-
- if (ctl & SSC_PDCTL)
- mask |= SSC_POWER_DOWN;
-
-#ifdef SUPPORT_OCP
- if (ctl & OC_PDCTL) {
- mask |= SD_OC_POWER_DOWN;
- if (CHECK_LUN_MODE(chip, SD_MS_2LUN))
- mask |= MS_OC_POWER_DOWN;
- }
-#endif
-
- if (mask) {
- retval = rtsx_write_register(chip, FPDCTL, mask, 0);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- if (CHECK_PID(chip, 0x5288))
- wait_timeout(200);
- }
-
- return STATUS_SUCCESS;
-}
-
-int rtsx_force_power_down(struct rtsx_chip *chip, u8 ctl)
-{
- int retval;
- u8 mask = 0, val = 0;
-
- if (ctl & SSC_PDCTL)
- mask |= SSC_POWER_DOWN;
-
-#ifdef SUPPORT_OCP
- if (ctl & OC_PDCTL) {
- mask |= SD_OC_POWER_DOWN;
- if (CHECK_LUN_MODE(chip, SD_MS_2LUN))
- mask |= MS_OC_POWER_DOWN;
- }
-#endif
-
- if (mask) {
- val = mask;
- retval = rtsx_write_register(chip, FPDCTL, mask, val);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- return STATUS_SUCCESS;
-}
diff --git a/drivers/staging/rts_pstor/rtsx_chip.h b/drivers/staging/rts_pstor/rtsx_chip.h
deleted file mode 100644
index 9f7cd82a..0000000
--- a/drivers/staging/rts_pstor/rtsx_chip.h
+++ /dev/null
@@ -1,989 +0,0 @@
-/* Driver for Realtek PCI-Express card reader
- * Header file
- *
- * Copyright(c) 2009 Realtek Semiconductor Corp. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, see <http://www.gnu.org/licenses/>.
- *
- * Author:
- * wwang (wei_wang@realsil.com.cn)
- * No. 450, Shenhu Road, Suzhou Industry Park, Suzhou, China
- */
-
-#ifndef __REALTEK_RTSX_CHIP_H
-#define __REALTEK_RTSX_CHIP_H
-
-#include "rtsx.h"
-
-#define SUPPORT_CPRM
-#define SUPPORT_OCP
-#define SUPPORT_SDIO_ASPM
-#define SUPPORT_MAGIC_GATE
-#define SUPPORT_MSXC
-#define SUPPORT_SD_LOCK
-/* Hardware switch bus_ctl and cd_ctl automatically */
-#define HW_AUTO_SWITCH_SD_BUS
-/* Enable hardware interrupt write clear */
-#define HW_INT_WRITE_CLR
-/* #define LED_AUTO_BLINK */
-/* #define DISABLE_CARD_INT */
-
-#ifdef SUPPORT_MAGIC_GATE
- /* Using NORMAL_WRITE instead of AUTO_WRITE to set ICV */
- #define MG_SET_ICV_SLOW
- /* HW may miss ERR/CMDNK signal when sampling INT status. */
- #define MS_SAMPLE_INT_ERR
- /* HW DO NOT support Wait_INT function during READ_BYTES transfer mode */
- #define READ_BYTES_WAIT_INT
-#endif
-
-#ifdef SUPPORT_MSXC
-#define XC_POWERCLASS
-#define SUPPORT_PCGL_1P18
-#endif
-
-#ifndef LED_AUTO_BLINK
-#define REGULAR_BLINK
-#endif
-
-#define LED_BLINK_SPEED 5
-#define LED_TOGGLE_INTERVAL 6
-#define GPIO_TOGGLE_THRESHOLD 1024
-#define LED_GPIO 0
-
-#define POLLING_INTERVAL 30
-
-#define TRACE_ITEM_CNT 64
-
-#ifndef STATUS_SUCCESS
-#define STATUS_SUCCESS 0
-#endif
-#ifndef STATUS_FAIL
-#define STATUS_FAIL 1
-#endif
-#ifndef STATUS_TIMEDOUT
-#define STATUS_TIMEDOUT 2
-#endif
-#ifndef STATUS_NOMEM
-#define STATUS_NOMEM 3
-#endif
-#ifndef STATUS_READ_FAIL
-#define STATUS_READ_FAIL 4
-#endif
-#ifndef STATUS_WRITE_FAIL
-#define STATUS_WRITE_FAIL 5
-#endif
-#ifndef STATUS_ERROR
-#define STATUS_ERROR 10
-#endif
-
-#define PM_S1 1
-#define PM_S3 3
-
-/*
- * Transport return codes
- */
-
-#define TRANSPORT_GOOD 0 /* Transport good, command good */
-#define TRANSPORT_FAILED 1 /* Transport good, command failed */
-#define TRANSPORT_NO_SENSE 2 /* Command failed, no auto-sense */
-#define TRANSPORT_ERROR 3 /* Transport bad (i.e. device dead) */
-
-
-/*-----------------------------------
- Start-Stop-Unit
------------------------------------*/
-#define STOP_MEDIUM 0x00 /* access disable */
-#define MAKE_MEDIUM_READY 0x01 /* access enable */
-#define UNLOAD_MEDIUM 0x02 /* unload */
-#define LOAD_MEDIUM 0x03 /* load */
-
-/*-----------------------------------
- STANDARD_INQUIRY
------------------------------------*/
-#define QULIFIRE 0x00
-#define AENC_FNC 0x00
-#define TRML_IOP 0x00
-#define REL_ADR 0x00
-#define WBUS_32 0x00
-#define WBUS_16 0x00
-#define SYNC 0x00
-#define LINKED 0x00
-#define CMD_QUE 0x00
-#define SFT_RE 0x00
-
-#define VEN_ID_LEN 8 /* Vendor ID Length */
-#define PRDCT_ID_LEN 16 /* Product ID Length */
-#define PRDCT_REV_LEN 4 /* Product LOT Length */
-
-/* Dynamic flag definitions: used in set_bit() etc. */
-#define RTSX_FLIDX_TRANS_ACTIVE 18 /* 0x00040000 transfer is active */
-#define RTSX_FLIDX_ABORTING 20 /* 0x00100000 abort is in progress */
-#define RTSX_FLIDX_DISCONNECTING 21 /* 0x00200000 disconnect in progress */
-#define ABORTING_OR_DISCONNECTING ((1UL << US_FLIDX_ABORTING) | \
- (1UL << US_FLIDX_DISCONNECTING))
-#define RTSX_FLIDX_RESETTING 22 /* 0x00400000 device reset in progress */
-#define RTSX_FLIDX_TIMED_OUT 23 /* 0x00800000 SCSI midlayer timed out */
-
-#define DRCT_ACCESS_DEV 0x00 /* Direct Access Device */
-#define RMB_DISC 0x80 /* The Device is Removable */
-#define ANSI_SCSI2 0x02 /* Based on ANSI-SCSI2 */
-
-#define SCSI 0x00 /* Interface ID */
-
-#define WRITE_PROTECTED_MEDIA 0x07
-
-/*---- sense key ----*/
-#define ILI 0x20 /* ILI bit is on */
-
-#define NO_SENSE 0x00 /* not exist sense key */
-#define RECOVER_ERR 0x01 /* Target/Logical unit is recoverd */
-#define NOT_READY 0x02 /* Logical unit is not ready */
-#define MEDIA_ERR 0x03 /* medium/data error */
-#define HARDWARE_ERR 0x04 /* hardware error */
-#define ILGAL_REQ 0x05 /* CDB/parameter/identify msg error */
-#define UNIT_ATTENTION 0x06 /* unit attention condition occur */
-#define DAT_PRTCT 0x07 /* read/write is desable */
-#define BLNC_CHK 0x08 /* find blank/DOF in read */
- /* write to unblank area */
-#define CPY_ABRT 0x0a /* Copy/Compare/Copy&Verify illgal */
-#define ABRT_CMD 0x0b /* Target make the command in error */
-#define EQUAL 0x0c /* Search Data end with Equal */
-#define VLM_OVRFLW 0x0d /* Some data are left in buffer */
-#define MISCMP 0x0e /* find inequality */
-
-#define READ_ERR -1
-#define WRITE_ERR -2
-
-#define FIRST_RESET 0x01
-#define USED_EXIST 0x02
-
-/*-----------------------------------
- SENSE_DATA
------------------------------------*/
-/*---- valid ----*/
-#define SENSE_VALID 0x80 /* Sense data is valid as SCSI2 */
-#define SENSE_INVALID 0x00 /* Sense data is invalid as SCSI2 */
-
-/*---- error code ----*/
-#define CUR_ERR 0x70 /* current error */
-#define DEF_ERR 0x71 /* specific command error */
-
-/*---- sense key Information ----*/
-#define SNSKEYINFO_LEN 3 /* length of sense key information */
-
-#define SKSV 0x80
-#define CDB_ILLEGAL 0x40
-#define DAT_ILLEGAL 0x00
-#define BPV 0x08
-#define BIT_ILLEGAL0 0 /* bit0 is illegal */
-#define BIT_ILLEGAL1 1 /* bit1 is illegal */
-#define BIT_ILLEGAL2 2 /* bit2 is illegal */
-#define BIT_ILLEGAL3 3 /* bit3 is illegal */
-#define BIT_ILLEGAL4 4 /* bit4 is illegal */
-#define BIT_ILLEGAL5 5 /* bit5 is illegal */
-#define BIT_ILLEGAL6 6 /* bit6 is illegal */
-#define BIT_ILLEGAL7 7 /* bit7 is illegal */
-
-/*---- ASC ----*/
-#define ASC_NO_INFO 0x00
-#define ASC_MISCMP 0x1d
-#define ASC_INVLD_CDB 0x24
-#define ASC_INVLD_PARA 0x26
-#define ASC_LU_NOT_READY 0x04
-#define ASC_WRITE_ERR 0x0c
-#define ASC_READ_ERR 0x11
-#define ASC_LOAD_EJCT_ERR 0x53
-#define ASC_MEDIA_NOT_PRESENT 0x3A
-#define ASC_MEDIA_CHANGED 0x28
-#define ASC_MEDIA_IN_PROCESS 0x04
-#define ASC_WRITE_PROTECT 0x27
-#define ASC_LUN_NOT_SUPPORTED 0x25
-
-/*---- ASQC ----*/
-#define ASCQ_NO_INFO 0x00
-#define ASCQ_MEDIA_IN_PROCESS 0x01
-#define ASCQ_MISCMP 0x00
-#define ASCQ_INVLD_CDB 0x00
-#define ASCQ_INVLD_PARA 0x02
-#define ASCQ_LU_NOT_READY 0x02
-#define ASCQ_WRITE_ERR 0x02
-#define ASCQ_READ_ERR 0x00
-#define ASCQ_LOAD_EJCT_ERR 0x00
-#define ASCQ_WRITE_PROTECT 0x00
-
-
-struct sense_data_t {
- unsigned char err_code; /* error code */
- /* bit7 : valid */
- /* (1 : SCSI2) */
- /* (0 : Vendor specific) */
- /* bit6-0 : error code */
- /* (0x70 : current error) */
- /* (0x71 : specific command error) */
- unsigned char seg_no; /* segment No. */
- unsigned char sense_key; /* byte5 : ILI */
- /* bit3-0 : sense key */
- unsigned char info[4]; /* information */
- unsigned char ad_sense_len; /* additional sense data length */
- unsigned char cmd_info[4]; /* command specific information */
- unsigned char asc; /* ASC */
- unsigned char ascq; /* ASCQ */
- unsigned char rfu; /* FRU */
- unsigned char sns_key_info[3]; /* sense key specific information */
-};
-
-/* PCI Operation Register Address */
-#define RTSX_HCBAR 0x00
-#define RTSX_HCBCTLR 0x04
-#define RTSX_HDBAR 0x08
-#define RTSX_HDBCTLR 0x0C
-#define RTSX_HAIMR 0x10
-#define RTSX_BIPR 0x14
-#define RTSX_BIER 0x18
-
-/* Host command buffer control register */
-#define STOP_CMD (0x01 << 28)
-
-/* Host data buffer control register */
-#define SDMA_MODE 0x00
-#define ADMA_MODE (0x02 << 26)
-#define STOP_DMA (0x01 << 28)
-#define TRIG_DMA (0x01 << 31)
-
-/* Bus interrupt pending register */
-#define CMD_DONE_INT (1 << 31)
-#define DATA_DONE_INT (1 << 30)
-#define TRANS_OK_INT (1 << 29)
-#define TRANS_FAIL_INT (1 << 28)
-#define XD_INT (1 << 27)
-#define MS_INT (1 << 26)
-#define SD_INT (1 << 25)
-#define GPIO0_INT (1 << 24)
-#define OC_INT (1 << 23)
-#define SD_WRITE_PROTECT (1 << 19)
-#define XD_EXIST (1 << 18)
-#define MS_EXIST (1 << 17)
-#define SD_EXIST (1 << 16)
-#define DELINK_INT GPIO0_INT
-#define MS_OC_INT (1 << 23)
-#define SD_OC_INT (1 << 22)
-
-#define CARD_INT (XD_INT | MS_INT | SD_INT)
-#define NEED_COMPLETE_INT (DATA_DONE_INT | TRANS_OK_INT | TRANS_FAIL_INT)
-#define RTSX_INT (CMD_DONE_INT | NEED_COMPLETE_INT | CARD_INT | GPIO0_INT | OC_INT)
-
-#define CARD_EXIST (XD_EXIST | MS_EXIST | SD_EXIST)
-
-/* Bus interrupt enable register */
-#define CMD_DONE_INT_EN (1 << 31)
-#define DATA_DONE_INT_EN (1 << 30)
-#define TRANS_OK_INT_EN (1 << 29)
-#define TRANS_FAIL_INT_EN (1 << 28)
-#define XD_INT_EN (1 << 27)
-#define MS_INT_EN (1 << 26)
-#define SD_INT_EN (1 << 25)
-#define GPIO0_INT_EN (1 << 24)
-#define OC_INT_EN (1 << 23)
-#define DELINK_INT_EN GPIO0_INT_EN
-#define MS_OC_INT_EN (1 << 23)
-#define SD_OC_INT_EN (1 << 22)
-
-
-#define READ_REG_CMD 0
-#define WRITE_REG_CMD 1
-#define CHECK_REG_CMD 2
-
-#define HOST_TO_DEVICE 0
-#define DEVICE_TO_HOST 1
-
-
-#define RTSX_RESV_BUF_LEN 4096
-#define HOST_CMDS_BUF_LEN 1024
-#define HOST_SG_TBL_BUF_LEN (RTSX_RESV_BUF_LEN - HOST_CMDS_BUF_LEN)
-
-#define SD_NR 2
-#define MS_NR 3
-#define XD_NR 4
-#define SPI_NR 7
-#define SD_CARD (1 << SD_NR)
-#define MS_CARD (1 << MS_NR)
-#define XD_CARD (1 << XD_NR)
-#define SPI_CARD (1 << SPI_NR)
-
-#define MAX_ALLOWED_LUN_CNT 8
-
-#define XD_FREE_TABLE_CNT 1200
-#define MS_FREE_TABLE_CNT 512
-
-
-/* Bit Operation */
-#define SET_BIT(data, idx) ((data) |= 1 << (idx))
-#define CLR_BIT(data, idx) ((data) &= ~(1 << (idx)))
-#define CHK_BIT(data, idx) ((data) & (1 << (idx)))
-
-/* SG descriptor */
-#define SG_INT 0x04
-#define SG_END 0x02
-#define SG_VALID 0x01
-
-#define SG_NO_OP 0x00
-#define SG_TRANS_DATA (0x02 << 4)
-#define SG_LINK_DESC (0x03 << 4)
-
-struct rtsx_chip;
-
-typedef int (*card_rw_func)(struct scsi_cmnd *srb, struct rtsx_chip *chip, u32 sec_addr, u16 sec_cnt);
-
-/* Supported Clock */
-enum card_clock {CLK_20 = 1, CLK_30, CLK_40, CLK_50, CLK_60, CLK_80, CLK_100, CLK_120, CLK_150, CLK_200};
-
-enum RTSX_STAT {RTSX_STAT_INIT, RTSX_STAT_IDLE, RTSX_STAT_RUN, RTSX_STAT_SS,
- RTSX_STAT_DELINK, RTSX_STAT_SUSPEND, RTSX_STAT_ABORT, RTSX_STAT_DISCONNECT};
-enum IC_VER {IC_VER_AB, IC_VER_C = 2, IC_VER_D = 3};
-
-#define MAX_RESET_CNT 3
-
-/* For MS Card */
-#define MAX_DEFECTIVE_BLOCK 10
-
-struct zone_entry {
- u16 *l2p_table;
- u16 *free_table;
- u16 defect_list[MAX_DEFECTIVE_BLOCK]; /* For MS card only */
- int set_index;
- int get_index;
- int unused_blk_cnt;
- int disable_count;
- /* To indicate whether the L2P table of this zone has been built. */
- int build_flag;
-};
-
-#define TYPE_SD 0x0000
-#define TYPE_MMC 0x0001
-
-/* TYPE_SD */
-#define SD_HS 0x0100
-#define SD_SDR50 0x0200
-#define SD_DDR50 0x0400
-#define SD_SDR104 0x0800
-#define SD_HCXC 0x1000
-
-/* TYPE_MMC */
-#define MMC_26M 0x0100
-#define MMC_52M 0x0200
-#define MMC_4BIT 0x0400
-#define MMC_8BIT 0x0800
-#define MMC_SECTOR_MODE 0x1000
-#define MMC_DDR52 0x2000
-
-/* SD card */
-#define CHK_SD(sd_card) (((sd_card)->sd_type & 0xFF) == TYPE_SD)
-#define CHK_SD_HS(sd_card) (CHK_SD(sd_card) && ((sd_card)->sd_type & SD_HS))
-#define CHK_SD_SDR50(sd_card) (CHK_SD(sd_card) && ((sd_card)->sd_type & SD_SDR50))
-#define CHK_SD_DDR50(sd_card) (CHK_SD(sd_card) && ((sd_card)->sd_type & SD_DDR50))
-#define CHK_SD_SDR104(sd_card) (CHK_SD(sd_card) && ((sd_card)->sd_type & SD_SDR104))
-#define CHK_SD_HCXC(sd_card) (CHK_SD(sd_card) && ((sd_card)->sd_type & SD_HCXC))
-#define CHK_SD_HC(sd_card) (CHK_SD_HCXC(sd_card) && ((sd_card)->capacity <= 0x4000000))
-#define CHK_SD_XC(sd_card) (CHK_SD_HCXC(sd_card) && ((sd_card)->capacity > 0x4000000))
-#define CHK_SD30_SPEED(sd_card) (CHK_SD_SDR50(sd_card) || CHK_SD_DDR50(sd_card) || CHK_SD_SDR104(sd_card))
-
-#define SET_SD(sd_card) ((sd_card)->sd_type = TYPE_SD)
-#define SET_SD_HS(sd_card) ((sd_card)->sd_type |= SD_HS)
-#define SET_SD_SDR50(sd_card) ((sd_card)->sd_type |= SD_SDR50)
-#define SET_SD_DDR50(sd_card) ((sd_card)->sd_type |= SD_DDR50)
-#define SET_SD_SDR104(sd_card) ((sd_card)->sd_type |= SD_SDR104)
-#define SET_SD_HCXC(sd_card) ((sd_card)->sd_type |= SD_HCXC)
-
-#define CLR_SD_HS(sd_card) ((sd_card)->sd_type &= ~SD_HS)
-#define CLR_SD_SDR50(sd_card) ((sd_card)->sd_type &= ~SD_SDR50)
-#define CLR_SD_DDR50(sd_card) ((sd_card)->sd_type &= ~SD_DDR50)
-#define CLR_SD_SDR104(sd_card) ((sd_card)->sd_type &= ~SD_SDR104)
-#define CLR_SD_HCXC(sd_card) ((sd_card)->sd_type &= ~SD_HCXC)
-
-/* MMC card */
-#define CHK_MMC(sd_card) (((sd_card)->sd_type & 0xFF) == TYPE_MMC)
-#define CHK_MMC_26M(sd_card) (CHK_MMC(sd_card) && ((sd_card)->sd_type & MMC_26M))
-#define CHK_MMC_52M(sd_card) (CHK_MMC(sd_card) && ((sd_card)->sd_type & MMC_52M))
-#define CHK_MMC_4BIT(sd_card) (CHK_MMC(sd_card) && ((sd_card)->sd_type & MMC_4BIT))
-#define CHK_MMC_8BIT(sd_card) (CHK_MMC(sd_card) && ((sd_card)->sd_type & MMC_8BIT))
-#define CHK_MMC_SECTOR_MODE(sd_card) (CHK_MMC(sd_card) && ((sd_card)->sd_type & MMC_SECTOR_MODE))
-#define CHK_MMC_DDR52(sd_card) (CHK_MMC(sd_card) && ((sd_card)->sd_type & MMC_DDR52))
-
-#define SET_MMC(sd_card) ((sd_card)->sd_type = TYPE_MMC)
-#define SET_MMC_26M(sd_card) ((sd_card)->sd_type |= MMC_26M)
-#define SET_MMC_52M(sd_card) ((sd_card)->sd_type |= MMC_52M)
-#define SET_MMC_4BIT(sd_card) ((sd_card)->sd_type |= MMC_4BIT)
-#define SET_MMC_8BIT(sd_card) ((sd_card)->sd_type |= MMC_8BIT)
-#define SET_MMC_SECTOR_MODE(sd_card) ((sd_card)->sd_type |= MMC_SECTOR_MODE)
-#define SET_MMC_DDR52(sd_card) ((sd_card)->sd_type |= MMC_DDR52)
-
-#define CLR_MMC_26M(sd_card) ((sd_card)->sd_type &= ~MMC_26M)
-#define CLR_MMC_52M(sd_card) ((sd_card)->sd_type &= ~MMC_52M)
-#define CLR_MMC_4BIT(sd_card) ((sd_card)->sd_type &= ~MMC_4BIT)
-#define CLR_MMC_8BIT(sd_card) ((sd_card)->sd_type &= ~MMC_8BIT)
-#define CLR_MMC_SECTOR_MODE(sd_card) ((sd_card)->sd_type &= ~MMC_SECTOR_MODE)
-#define CLR_MMC_DDR52(sd_card) ((sd_card)->sd_type &= ~MMC_DDR52)
-
-#define CHK_MMC_HS(sd_card) (CHK_MMC_52M(sd_card) && CHK_MMC_26M(sd_card))
-#define CLR_MMC_HS(sd_card) \
-do { \
- CLR_MMC_DDR52(sd_card); \
- CLR_MMC_52M(sd_card); \
- CLR_MMC_26M(sd_card); \
-} while (0)
-
-#define SD_SUPPORT_CLASS_TEN 0x01
-#define SD_SUPPORT_1V8 0x02
-
-#define SD_SET_CLASS_TEN(sd_card) ((sd_card)->sd_setting |= SD_SUPPORT_CLASS_TEN)
-#define SD_CHK_CLASS_TEN(sd_card) ((sd_card)->sd_setting & SD_SUPPORT_CLASS_TEN)
-#define SD_CLR_CLASS_TEN(sd_card) ((sd_card)->sd_setting &= ~SD_SUPPORT_CLASS_TEN)
-#define SD_SET_1V8(sd_card) ((sd_card)->sd_setting |= SD_SUPPORT_1V8)
-#define SD_CHK_1V8(sd_card) ((sd_card)->sd_setting & SD_SUPPORT_1V8)
-#define SD_CLR_1V8(sd_card) ((sd_card)->sd_setting &= ~SD_SUPPORT_1V8)
-
-struct sd_info {
- u16 sd_type;
- u8 err_code;
- u8 sd_data_buf_ready;
- u32 sd_addr;
- u32 capacity;
-
- u8 raw_csd[16];
- u8 raw_scr[8];
-
- /* Sequential RW */
- int seq_mode;
- enum dma_data_direction pre_dir;
- u32 pre_sec_addr;
- u16 pre_sec_cnt;
-
- int cleanup_counter;
-
- int sd_clock;
-
- int mmc_dont_switch_bus;
-
-#ifdef SUPPORT_CPRM
- int sd_pass_thru_en;
- int pre_cmd_err;
- u8 last_rsp_type;
- u8 rsp[17];
-#endif
-
- u8 func_group1_mask;
- u8 func_group2_mask;
- u8 func_group3_mask;
- u8 func_group4_mask;
-
- u8 sd_switch_fail;
- u8 sd_read_phase;
-
-#ifdef SUPPORT_SD_LOCK
- u8 sd_lock_status;
- u8 sd_erase_status;
- u8 sd_lock_notify;
-#endif
- int need_retune;
-};
-
-struct xd_delay_write_tag {
- u32 old_phyblock;
- u32 new_phyblock;
- u32 logblock;
- u8 pageoff;
- u8 delay_write_flag;
-};
-
-struct xd_info {
- u8 maker_code;
- u8 device_code;
- u8 block_shift;
- u8 page_off;
- u8 addr_cycle;
- u16 cis_block;
- u8 multi_flag;
- u8 err_code;
- u32 capacity;
-
- struct zone_entry *zone;
- int zone_cnt;
-
- struct xd_delay_write_tag delay_write;
- int cleanup_counter;
-
- int xd_clock;
-};
-
-#define MODE_512_SEQ 0x01
-#define MODE_2K_SEQ 0x02
-
-#define TYPE_MS 0x0000
-#define TYPE_MSPRO 0x0001
-
-#define MS_4BIT 0x0100
-#define MS_8BIT 0x0200
-#define MS_HG 0x0400
-#define MS_XC 0x0800
-
-#define HG8BIT (MS_HG | MS_8BIT)
-
-#define CHK_MSPRO(ms_card) (((ms_card)->ms_type & 0xFF) == TYPE_MSPRO)
-#define CHK_HG8BIT(ms_card) (CHK_MSPRO(ms_card) && (((ms_card)->ms_type & HG8BIT) == HG8BIT))
-#define CHK_MSXC(ms_card) (CHK_MSPRO(ms_card) && ((ms_card)->ms_type & MS_XC))
-#define CHK_MSHG(ms_card) (CHK_MSPRO(ms_card) && ((ms_card)->ms_type & MS_HG))
-
-#define CHK_MS8BIT(ms_card) (((ms_card)->ms_type & MS_8BIT))
-#define CHK_MS4BIT(ms_card) (((ms_card)->ms_type & MS_4BIT))
-
-struct ms_delay_write_tag {
- u16 old_phyblock;
- u16 new_phyblock;
- u16 logblock;
- u8 pageoff;
- u8 delay_write_flag;
-};
-
-struct ms_info {
- u16 ms_type;
- u8 block_shift;
- u8 page_off;
- u16 total_block;
- u16 boot_block;
- u32 capacity;
-
- u8 check_ms_flow;
- u8 switch_8bit_fail;
- u8 err_code;
-
- struct zone_entry *segment;
- int segment_cnt;
-
- int pro_under_formatting;
- int format_status;
- u16 progress;
- u8 raw_sys_info[96];
-#ifdef SUPPORT_PCGL_1P18
- u8 raw_model_name[48];
-#endif
-
- u8 multi_flag;
-
- /* Sequential RW */
- u8 seq_mode;
- enum dma_data_direction pre_dir;
- u32 pre_sec_addr;
- u16 pre_sec_cnt;
- u32 total_sec_cnt;
-
- struct ms_delay_write_tag delay_write;
-
- int cleanup_counter;
-
- int ms_clock;
-
-#ifdef SUPPORT_MAGIC_GATE
- u8 magic_gate_id[16];
- u8 mg_entry_num;
- int mg_auth; /* flag to indicate authentication process */
-#endif
-};
-
-struct spi_info {
- u8 use_clk;
- u8 write_en;
- u16 clk_div;
- u8 err_code;
-
- int spi_clock;
-};
-
-
-#ifdef _MSG_TRACE
-struct trace_msg_t {
- u16 line;
-#define MSG_FUNC_LEN 64
- char func[MSG_FUNC_LEN];
-#define MSG_FILE_LEN 32
- char file[MSG_FILE_LEN];
-#define TIME_VAL_LEN 16
- u8 timeval_buf[TIME_VAL_LEN];
- u8 valid;
-};
-#endif
-
-/************/
-/* LUN mode */
-/************/
-/* Single LUN, support xD/SD/MS */
-#define DEFAULT_SINGLE 0
-/* 2 LUN mode, support SD/MS */
-#define SD_MS_2LUN 1
-/* Single LUN, but only support SD/MS, for Barossa LQFP */
-#define SD_MS_1LUN 2
-
-#define LAST_LUN_MODE 2
-
-/* Barossa package */
-#define QFN 0
-#define LQFP 1
-
-/******************/
-/* sd_ctl bit map */
-/******************/
-/* SD push point control, bit 0, 1 */
-#define SD_PUSH_POINT_CTL_MASK 0x03
-#define SD_PUSH_POINT_DELAY 0x01
-#define SD_PUSH_POINT_AUTO 0x02
-/* SD sample point control, bit 2, 3 */
-#define SD_SAMPLE_POINT_CTL_MASK 0x0C
-#define SD_SAMPLE_POINT_DELAY 0x04
-#define SD_SAMPLE_POINT_AUTO 0x08
-/* SD DDR Tx phase set by user, bit 4 */
-#define SD_DDR_TX_PHASE_SET_BY_USER 0x10
-/* MMC DDR Tx phase set by user, bit 5 */
-#define MMC_DDR_TX_PHASE_SET_BY_USER 0x20
-/* Support MMC DDR mode, bit 6 */
-#define SUPPORT_MMC_DDR_MODE 0x40
-/* Reset MMC at first */
-#define RESET_MMC_FIRST 0x80
-
-#define SEQ_START_CRITERIA 0x20
-
-/* MS Power Class En */
-#define POWER_CLASS_2_EN 0x02
-#define POWER_CLASS_1_EN 0x01
-
-#define MAX_SHOW_CNT 10
-#define MAX_RESET_CNT 3
-
-#define SDIO_EXIST 0x01
-#define SDIO_IGNORED 0x02
-
-#define CHK_SDIO_EXIST(chip) ((chip)->sdio_func_exist & SDIO_EXIST)
-#define SET_SDIO_EXIST(chip) ((chip)->sdio_func_exist |= SDIO_EXIST)
-#define CLR_SDIO_EXIST(chip) ((chip)->sdio_func_exist &= ~SDIO_EXIST)
-
-#define CHK_SDIO_IGNORED(chip) ((chip)->sdio_func_exist & SDIO_IGNORED)
-#define SET_SDIO_IGNORED(chip) ((chip)->sdio_func_exist |= SDIO_IGNORED)
-#define CLR_SDIO_IGNORED(chip) ((chip)->sdio_func_exist &= ~SDIO_IGNORED)
-
-struct rtsx_chip {
- rtsx_dev_t *rtsx;
-
- u32 int_reg; /* Bus interrupt pending register */
- char max_lun;
- void *context;
-
- void *host_cmds_ptr; /* host commands buffer pointer */
- dma_addr_t host_cmds_addr;
- int ci; /* Command Index */
-
- void *host_sg_tbl_ptr; /* SG descriptor table */
- dma_addr_t host_sg_tbl_addr;
- int sgi; /* SG entry index */
-
- struct scsi_cmnd *srb; /* current srb */
- struct sense_data_t sense_buffer[MAX_ALLOWED_LUN_CNT];
-
- int cur_clk; /* current card clock */
-
- /* Current accessed card */
- int cur_card;
-
- unsigned long need_release; /* need release bit map */
- unsigned long need_reset; /* need reset bit map */
- /* Flag to indicate that this card is just resumed from SS state,
- * and need released before being resetted
- */
- unsigned long need_reinit;
-
- int rw_need_retry;
-
-#ifdef SUPPORT_OCP
- u32 ocp_int;
- u8 ocp_stat;
-#endif
-
- u8 card_exist; /* card exist bit map (physical exist) */
- u8 card_ready; /* card ready bit map (reset successfully) */
- u8 card_fail; /* card reset fail bit map */
- u8 card_ejected; /* card ejected bit map */
- u8 card_wp; /* card write protected bit map */
-
- u8 lun_mc; /* flag to indicate whether to answer MediaChange */
-
-#ifndef LED_AUTO_BLINK
- int led_toggle_counter;
-#endif
-
- int sd_reset_counter;
- int xd_reset_counter;
- int ms_reset_counter;
-
- /* card bus width */
- u8 card_bus_width[MAX_ALLOWED_LUN_CNT];
- /* card capacity */
- u32 capacity[MAX_ALLOWED_LUN_CNT];
- /* read/write card function pointer */
- card_rw_func rw_card[MAX_ALLOWED_LUN_CNT];
- /* read/write capacity, used for GPIO Toggle */
- u32 rw_cap[MAX_ALLOWED_LUN_CNT];
- /* card to lun mapping table */
- u8 card2lun[32];
- /* lun to card mapping table */
- u8 lun2card[MAX_ALLOWED_LUN_CNT];
-
- int rw_fail_cnt[MAX_ALLOWED_LUN_CNT];
-
- int sd_show_cnt;
- int xd_show_cnt;
- int ms_show_cnt;
-
- /* card information */
- struct sd_info sd_card;
- struct xd_info xd_card;
- struct ms_info ms_card;
-
- struct spi_info spi;
-
-#ifdef _MSG_TRACE
- struct trace_msg_t trace_msg[TRACE_ITEM_CNT];
- int msg_idx;
-#endif
-
- int auto_delink_cnt;
- int auto_delink_allowed;
-
- int aspm_enabled;
-
- int sdio_aspm;
- int sdio_idle;
- int sdio_counter;
- u8 sdio_raw_data[12];
-
- u8 sd_io;
- u8 sd_int;
-
- u8 rtsx_flag;
-
- int ss_counter;
- int idle_counter;
- enum RTSX_STAT rtsx_stat;
-
- u16 vendor_id;
- u16 product_id;
- u8 ic_version;
-
- int driver_first_load;
-
-#ifdef HW_AUTO_SWITCH_SD_BUS
- int sdio_in_charge;
-#endif
-
- u8 aspm_level[2];
-
- int chip_insert_with_sdio;
-
- /* Options */
-
- int adma_mode;
-
- int auto_delink_en;
- int ss_en;
- u8 lun_mode;
- u8 aspm_l0s_l1_en;
-
- int power_down_in_ss;
-
- int sdr104_en;
- int ddr50_en;
- int sdr50_en;
-
- int baro_pkg;
-
- int asic_code;
- int phy_debug_mode;
- int hw_bypass_sd;
- int sdio_func_exist;
- int aux_pwr_exist;
- u8 ms_power_class_en;
-
- int mspro_formatter_enable;
-
- int remote_wakeup_en;
-
- int ignore_sd;
- int use_hw_setting;
-
- int ss_idle_period;
-
- int dynamic_aspm;
-
- int fpga_sd_sdr104_clk;
- int fpga_sd_ddr50_clk;
- int fpga_sd_sdr50_clk;
- int fpga_sd_hs_clk;
- int fpga_mmc_52m_clk;
- int fpga_ms_hg_clk;
- int fpga_ms_4bit_clk;
- int fpga_ms_1bit_clk;
-
- int asic_sd_sdr104_clk;
- int asic_sd_ddr50_clk;
- int asic_sd_sdr50_clk;
- int asic_sd_hs_clk;
- int asic_mmc_52m_clk;
- int asic_ms_hg_clk;
- int asic_ms_4bit_clk;
- int asic_ms_1bit_clk;
-
- u8 ssc_depth_sd_sdr104;
- u8 ssc_depth_sd_ddr50;
- u8 ssc_depth_sd_sdr50;
- u8 ssc_depth_sd_hs;
- u8 ssc_depth_mmc_52m;
- u8 ssc_depth_ms_hg;
- u8 ssc_depth_ms_4bit;
- u8 ssc_depth_low_speed;
-
- u8 card_drive_sel;
- u8 sd30_drive_sel_1v8;
- u8 sd30_drive_sel_3v3;
-
- u8 sd_400mA_ocp_thd;
- u8 sd_800mA_ocp_thd;
- u8 ms_ocp_thd;
-
- int ssc_en;
- int msi_en;
-
- int xd_timeout;
- int sd_timeout;
- int ms_timeout;
- int mspro_timeout;
-
- int auto_power_down;
-
- int sd_ddr_tx_phase;
- int mmc_ddr_tx_phase;
- int sd_default_tx_phase;
- int sd_default_rx_phase;
-
- int pmos_pwr_on_interval;
- int sd_voltage_switch_delay;
- int s3_pwr_off_delay;
-
- int force_clkreq_0;
- int ft2_fast_mode;
-
- int do_delink_before_power_down;
- int polling_config;
- int sdio_retry_cnt;
-
- int delink_stage1_step;
- int delink_stage2_step;
- int delink_stage3_step;
-
- int auto_delink_in_L1;
- int hp_watch_bios_hotplug;
- int support_ms_8bit;
-
- u8 blink_led;
- u8 phy_voltage;
- u8 max_payload;
-
- u32 sd_speed_prior;
- u32 sd_current_prior;
- u32 sd_ctl;
-};
-
-#define rtsx_set_stat(chip, stat) \
-do { \
- if ((stat) != RTSX_STAT_IDLE) { \
- (chip)->idle_counter = 0; \
- } \
- (chip)->rtsx_stat = (enum RTSX_STAT)(stat); \
-} while (0)
-#define rtsx_get_stat(chip) ((chip)->rtsx_stat)
-#define rtsx_chk_stat(chip, stat) ((chip)->rtsx_stat == (stat))
-
-#define RTSX_SET_DELINK(chip) ((chip)->rtsx_flag |= 0x01)
-#define RTSX_CLR_DELINK(chip) ((chip)->rtsx_flag &= 0xFE)
-#define RTSX_TST_DELINK(chip) ((chip)->rtsx_flag & 0x01)
-
-#define CHECK_PID(chip, pid) ((chip)->product_id == (pid))
-#define CHECK_BARO_PKG(chip, pkg) ((chip)->baro_pkg == (pkg))
-#define CHECK_LUN_MODE(chip, mode) ((chip)->lun_mode == (mode))
-
-/* Power down control */
-#define SSC_PDCTL 0x01
-#define OC_PDCTL 0x02
-
-int rtsx_force_power_on(struct rtsx_chip *chip, u8 ctl);
-int rtsx_force_power_down(struct rtsx_chip *chip, u8 ctl);
-
-void rtsx_disable_card_int(struct rtsx_chip *chip);
-void rtsx_enable_card_int(struct rtsx_chip *chip);
-void rtsx_enable_bus_int(struct rtsx_chip *chip);
-void rtsx_disable_bus_int(struct rtsx_chip *chip);
-int rtsx_reset_chip(struct rtsx_chip *chip);
-int rtsx_init_chip(struct rtsx_chip *chip);
-void rtsx_release_chip(struct rtsx_chip *chip);
-void rtsx_polling_func(struct rtsx_chip *chip);
-void rtsx_undo_delink(struct rtsx_chip *chip);
-void rtsx_stop_cmd(struct rtsx_chip *chip, int card);
-int rtsx_write_register(struct rtsx_chip *chip, u16 addr, u8 mask, u8 data);
-int rtsx_read_register(struct rtsx_chip *chip, u16 addr, u8 *data);
-int rtsx_write_cfg_dw(struct rtsx_chip *chip, u8 func_no, u16 addr, u32 mask, u32 val);
-int rtsx_read_cfg_dw(struct rtsx_chip *chip, u8 func_no, u16 addr, u32 *val);
-int rtsx_write_cfg_seq(struct rtsx_chip *chip, u8 func, u16 addr, u8 *buf, int len);
-int rtsx_read_cfg_seq(struct rtsx_chip *chip, u8 func, u16 addr, u8 *buf, int len);
-int rtsx_write_phy_register(struct rtsx_chip *chip, u8 addr, u16 val);
-int rtsx_read_phy_register(struct rtsx_chip *chip, u8 addr, u16 *val);
-int rtsx_read_efuse(struct rtsx_chip *chip, u8 addr, u8 *val);
-int rtsx_write_efuse(struct rtsx_chip *chip, u8 addr, u8 val);
-int rtsx_clr_phy_reg_bit(struct rtsx_chip *chip, u8 reg, u8 bit);
-int rtsx_set_phy_reg_bit(struct rtsx_chip *chip, u8 reg, u8 bit);
-int rtsx_check_link_ready(struct rtsx_chip *chip);
-void rtsx_enter_ss(struct rtsx_chip *chip);
-void rtsx_exit_ss(struct rtsx_chip *chip);
-int rtsx_pre_handle_interrupt(struct rtsx_chip *chip);
-void rtsx_enter_L1(struct rtsx_chip *chip);
-void rtsx_exit_L1(struct rtsx_chip *chip);
-void rtsx_do_before_power_down(struct rtsx_chip *chip, int pm_stat);
-void rtsx_enable_aspm(struct rtsx_chip *chip);
-void rtsx_disable_aspm(struct rtsx_chip *chip);
-int rtsx_read_ppbuf(struct rtsx_chip *chip, u8 *buf, int buf_len);
-int rtsx_write_ppbuf(struct rtsx_chip *chip, u8 *buf, int buf_len);
-int rtsx_check_chip_exist(struct rtsx_chip *chip);
-
-#define RTSX_WRITE_REG(chip, addr, mask, data) \
-do { \
- int retval = rtsx_write_register((chip), (addr), (mask), (data)); \
- if (retval != STATUS_SUCCESS) { \
- TRACE_RET((chip), retval); \
- } \
-} while (0)
-
-#define RTSX_READ_REG(chip, addr, data) \
-do { \
- int retval = rtsx_read_register((chip), (addr), (data)); \
- if (retval != STATUS_SUCCESS) { \
- TRACE_RET((chip), retval); \
- } \
-} while (0)
-
-#endif /* __REALTEK_RTSX_CHIP_H */
diff --git a/drivers/staging/rts_pstor/rtsx_scsi.c b/drivers/staging/rts_pstor/rtsx_scsi.c
deleted file mode 100644
index 86c41b3..0000000
--- a/drivers/staging/rts_pstor/rtsx_scsi.c
+++ /dev/null
@@ -1,3137 +0,0 @@
-/* Driver for Realtek PCI-Express card reader
- *
- * Copyright(c) 2009 Realtek Semiconductor Corp. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, see <http://www.gnu.org/licenses/>.
- *
- * Author:
- * wwang (wei_wang@realsil.com.cn)
- * No. 450, Shenhu Road, Suzhou Industry Park, Suzhou, China
- */
-
-#include <linux/blkdev.h>
-#include <linux/kthread.h>
-#include <linux/sched.h>
-#include <linux/vmalloc.h>
-
-#include "rtsx.h"
-#include "rtsx_transport.h"
-#include "rtsx_sys.h"
-#include "rtsx_card.h"
-#include "rtsx_chip.h"
-#include "rtsx_scsi.h"
-#include "sd.h"
-#include "ms.h"
-#include "spi.h"
-
-void scsi_show_command(struct scsi_cmnd *srb)
-{
- char *what = NULL;
- int i, unknown_cmd = 0;
-
- switch (srb->cmnd[0]) {
- case TEST_UNIT_READY: what = "TEST_UNIT_READY"; break;
- case REZERO_UNIT: what = "REZERO_UNIT"; break;
- case REQUEST_SENSE: what = "REQUEST_SENSE"; break;
- case FORMAT_UNIT: what = "FORMAT_UNIT"; break;
- case READ_BLOCK_LIMITS: what = "READ_BLOCK_LIMITS"; break;
- case REASSIGN_BLOCKS: what = "REASSIGN_BLOCKS"; break;
- case READ_6: what = "READ_6"; break;
- case WRITE_6: what = "WRITE_6"; break;
- case SEEK_6: what = "SEEK_6"; break;
- case READ_REVERSE: what = "READ_REVERSE"; break;
- case WRITE_FILEMARKS: what = "WRITE_FILEMARKS"; break;
- case SPACE: what = "SPACE"; break;
- case INQUIRY: what = "INQUIRY"; break;
- case RECOVER_BUFFERED_DATA: what = "RECOVER_BUFFERED_DATA"; break;
- case MODE_SELECT: what = "MODE_SELECT"; break;
- case RESERVE: what = "RESERVE"; break;
- case RELEASE: what = "RELEASE"; break;
- case COPY: what = "COPY"; break;
- case ERASE: what = "ERASE"; break;
- case MODE_SENSE: what = "MODE_SENSE"; break;
- case START_STOP: what = "START_STOP"; break;
- case RECEIVE_DIAGNOSTIC: what = "RECEIVE_DIAGNOSTIC"; break;
- case SEND_DIAGNOSTIC: what = "SEND_DIAGNOSTIC"; break;
- case ALLOW_MEDIUM_REMOVAL: what = "ALLOW_MEDIUM_REMOVAL"; break;
- case SET_WINDOW: what = "SET_WINDOW"; break;
- case READ_CAPACITY: what = "READ_CAPACITY"; break;
- case READ_10: what = "READ_10"; break;
- case WRITE_10: what = "WRITE_10"; break;
- case SEEK_10: what = "SEEK_10"; break;
- case WRITE_VERIFY: what = "WRITE_VERIFY"; break;
- case VERIFY: what = "VERIFY"; break;
- case SEARCH_HIGH: what = "SEARCH_HIGH"; break;
- case SEARCH_EQUAL: what = "SEARCH_EQUAL"; break;
- case SEARCH_LOW: what = "SEARCH_LOW"; break;
- case SET_LIMITS: what = "SET_LIMITS"; break;
- case READ_POSITION: what = "READ_POSITION"; break;
- case SYNCHRONIZE_CACHE: what = "SYNCHRONIZE_CACHE"; break;
- case LOCK_UNLOCK_CACHE: what = "LOCK_UNLOCK_CACHE"; break;
- case READ_DEFECT_DATA: what = "READ_DEFECT_DATA"; break;
- case MEDIUM_SCAN: what = "MEDIUM_SCAN"; break;
- case COMPARE: what = "COMPARE"; break;
- case COPY_VERIFY: what = "COPY_VERIFY"; break;
- case WRITE_BUFFER: what = "WRITE_BUFFER"; break;
- case READ_BUFFER: what = "READ_BUFFER"; break;
- case UPDATE_BLOCK: what = "UPDATE_BLOCK"; break;
- case READ_LONG: what = "READ_LONG"; break;
- case WRITE_LONG: what = "WRITE_LONG"; break;
- case CHANGE_DEFINITION: what = "CHANGE_DEFINITION"; break;
- case WRITE_SAME: what = "WRITE_SAME"; break;
- case GPCMD_READ_SUBCHANNEL: what = "READ SUBCHANNEL"; break;
- case READ_TOC: what = "READ_TOC"; break;
- case GPCMD_READ_HEADER: what = "READ HEADER"; break;
- case GPCMD_PLAY_AUDIO_10: what = "PLAY AUDIO (10)"; break;
- case GPCMD_PLAY_AUDIO_MSF: what = "PLAY AUDIO MSF"; break;
- case GPCMD_GET_EVENT_STATUS_NOTIFICATION:
- what = "GET EVENT/STATUS NOTIFICATION"; break;
- case GPCMD_PAUSE_RESUME: what = "PAUSE/RESUME"; break;
- case LOG_SELECT: what = "LOG_SELECT"; break;
- case LOG_SENSE: what = "LOG_SENSE"; break;
- case GPCMD_STOP_PLAY_SCAN: what = "STOP PLAY/SCAN"; break;
- case GPCMD_READ_DISC_INFO: what = "READ DISC INFORMATION"; break;
- case GPCMD_READ_TRACK_RZONE_INFO:
- what = "READ TRACK INFORMATION"; break;
- case GPCMD_RESERVE_RZONE_TRACK: what = "RESERVE TRACK"; break;
- case GPCMD_SEND_OPC: what = "SEND OPC"; break;
- case MODE_SELECT_10: what = "MODE_SELECT_10"; break;
- case GPCMD_REPAIR_RZONE_TRACK: what = "REPAIR TRACK"; break;
- case 0x59: what = "READ MASTER CUE"; break;
- case MODE_SENSE_10: what = "MODE_SENSE_10"; break;
- case GPCMD_CLOSE_TRACK: what = "CLOSE TRACK/SESSION"; break;
- case 0x5C: what = "READ BUFFER CAPACITY"; break;
- case 0x5D: what = "SEND CUE SHEET"; break;
- case GPCMD_BLANK: what = "BLANK"; break;
- case REPORT_LUNS: what = "REPORT LUNS"; break;
- case MOVE_MEDIUM: what = "MOVE_MEDIUM or PLAY AUDIO (12)"; break;
- case READ_12: what = "READ_12"; break;
- case WRITE_12: what = "WRITE_12"; break;
- case WRITE_VERIFY_12: what = "WRITE_VERIFY_12"; break;
- case SEARCH_HIGH_12: what = "SEARCH_HIGH_12"; break;
- case SEARCH_EQUAL_12: what = "SEARCH_EQUAL_12"; break;
- case SEARCH_LOW_12: what = "SEARCH_LOW_12"; break;
- case SEND_VOLUME_TAG: what = "SEND_VOLUME_TAG"; break;
- case READ_ELEMENT_STATUS: what = "READ_ELEMENT_STATUS"; break;
- case GPCMD_READ_CD_MSF: what = "READ CD MSF"; break;
- case GPCMD_SCAN: what = "SCAN"; break;
- case GPCMD_SET_SPEED: what = "SET CD SPEED"; break;
- case GPCMD_MECHANISM_STATUS: what = "MECHANISM STATUS"; break;
- case GPCMD_READ_CD: what = "READ CD"; break;
- case 0xE1: what = "WRITE CONTINUE"; break;
- case WRITE_LONG_2: what = "WRITE_LONG_2"; break;
- case VENDOR_CMND: what = "Realtek's vendor command"; break;
- default: what = "(unknown command)"; unknown_cmd = 1; break;
- }
-
- if (srb->cmnd[0] != TEST_UNIT_READY)
- RTSX_DEBUGP("Command %s (%d bytes)\n", what, srb->cmd_len);
-
- if (unknown_cmd) {
- RTSX_DEBUGP("");
- for (i = 0; i < srb->cmd_len && i < 16; i++)
- RTSX_DEBUGPN(" %02x", srb->cmnd[i]);
- RTSX_DEBUGPN("\n");
- }
-}
-
-void set_sense_type(struct rtsx_chip *chip, unsigned int lun, int sense_type)
-{
- switch (sense_type) {
- case SENSE_TYPE_MEDIA_CHANGE:
- set_sense_data(chip, lun, CUR_ERR, 0x06, 0, 0x28, 0, 0, 0);
- break;
-
- case SENSE_TYPE_MEDIA_NOT_PRESENT:
- set_sense_data(chip, lun, CUR_ERR, 0x02, 0, 0x3A, 0, 0, 0);
- break;
-
- case SENSE_TYPE_MEDIA_LBA_OVER_RANGE:
- set_sense_data(chip, lun, CUR_ERR, 0x05, 0, 0x21, 0, 0, 0);
- break;
-
- case SENSE_TYPE_MEDIA_LUN_NOT_SUPPORT:
- set_sense_data(chip, lun, CUR_ERR, 0x05, 0, 0x25, 0, 0, 0);
- break;
-
- case SENSE_TYPE_MEDIA_WRITE_PROTECT:
- set_sense_data(chip, lun, CUR_ERR, 0x07, 0, 0x27, 0, 0, 0);
- break;
-
- case SENSE_TYPE_MEDIA_UNRECOVER_READ_ERR:
- set_sense_data(chip, lun, CUR_ERR, 0x03, 0, 0x11, 0, 0, 0);
- break;
-
- case SENSE_TYPE_MEDIA_WRITE_ERR:
- set_sense_data(chip, lun, CUR_ERR, 0x03, 0, 0x0C, 0x02, 0, 0);
- break;
-
- case SENSE_TYPE_MEDIA_INVALID_CMD_FIELD:
- set_sense_data(chip, lun, CUR_ERR, ILGAL_REQ, 0,
- ASC_INVLD_CDB, ASCQ_INVLD_CDB, CDB_ILLEGAL, 1);
- break;
-
- case SENSE_TYPE_FORMAT_IN_PROGRESS:
- set_sense_data(chip, lun, CUR_ERR, 0x02, 0, 0x04, 0x04, 0, 0);
- break;
-
- case SENSE_TYPE_FORMAT_CMD_FAILED:
- set_sense_data(chip, lun, CUR_ERR, 0x03, 0, 0x31, 0x01, 0, 0);
- break;
-
-#ifdef SUPPORT_MAGIC_GATE
- case SENSE_TYPE_MG_KEY_FAIL_NOT_ESTAB:
- set_sense_data(chip, lun, CUR_ERR, 0x05, 0, 0x6F, 0x02, 0, 0);
- break;
-
- case SENSE_TYPE_MG_KEY_FAIL_NOT_AUTHEN:
- set_sense_data(chip, lun, CUR_ERR, 0x05, 0, 0x6F, 0x00, 0, 0);
- break;
-
- case SENSE_TYPE_MG_INCOMPATIBLE_MEDIUM:
- set_sense_data(chip, lun, CUR_ERR, 0x02, 0, 0x30, 0x00, 0, 0);
- break;
-
- case SENSE_TYPE_MG_WRITE_ERR:
- set_sense_data(chip, lun, CUR_ERR, 0x03, 0, 0x0C, 0x00, 0, 0);
- break;
-#endif
-
-#ifdef SUPPORT_SD_LOCK
- case SENSE_TYPE_MEDIA_READ_FORBIDDEN:
- set_sense_data(chip, lun, CUR_ERR, 0x07, 0, 0x11, 0x13, 0, 0);
- break;
-#endif
-
- case SENSE_TYPE_NO_SENSE:
- default:
- set_sense_data(chip, lun, CUR_ERR, 0, 0, 0, 0, 0, 0);
- break;
- }
-}
-
-void set_sense_data(struct rtsx_chip *chip, unsigned int lun, u8 err_code, u8 sense_key,
- u32 info, u8 asc, u8 ascq, u8 sns_key_info0, u16 sns_key_info1)
-{
- struct sense_data_t *sense = &(chip->sense_buffer[lun]);
-
- sense->err_code = err_code;
- sense->sense_key = sense_key;
- sense->info[0] = (u8)(info >> 24);
- sense->info[1] = (u8)(info >> 16);
- sense->info[2] = (u8)(info >> 8);
- sense->info[3] = (u8)info;
-
- sense->ad_sense_len = sizeof(struct sense_data_t) - 8;
- sense->asc = asc;
- sense->ascq = ascq;
- if (sns_key_info0 != 0) {
- sense->sns_key_info[0] = SKSV | sns_key_info0;
- sense->sns_key_info[1] = (sns_key_info1 & 0xf0) >> 8;
- sense->sns_key_info[2] = sns_key_info1 & 0x0f;
- }
-}
-
-static int test_unit_ready(struct scsi_cmnd *srb, struct rtsx_chip *chip)
-{
- unsigned int lun = SCSI_LUN(srb);
-
- if (!check_card_ready(chip, lun)) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_NOT_PRESENT);
- return TRANSPORT_FAILED;
- }
-
- if (!(CHK_BIT(chip->lun_mc, lun))) {
- SET_BIT(chip->lun_mc, lun);
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_CHANGE);
- return TRANSPORT_FAILED;
- }
-
-#ifdef SUPPORT_SD_LOCK
- if (get_lun_card(chip, SCSI_LUN(srb)) == SD_CARD) {
- struct sd_info *sd_card = &(chip->sd_card);
- if (sd_card->sd_lock_notify) {
- sd_card->sd_lock_notify = 0;
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_CHANGE);
- return TRANSPORT_FAILED;
- } else if (sd_card->sd_lock_status & SD_LOCKED) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_READ_FORBIDDEN);
- return TRANSPORT_FAILED;
- }
- }
-#endif
-
- return TRANSPORT_GOOD;
-}
-
-static unsigned char formatter_inquiry_str[20] = {
- 'M', 'E', 'M', 'O', 'R', 'Y', 'S', 'T', 'I', 'C', 'K',
-#ifdef SUPPORT_MAGIC_GATE
- '-', 'M', 'G', /* Byte[47:49] */
-#else
- 0x20, 0x20, 0x20, /* Byte[47:49] */
-#endif
-
-#ifdef SUPPORT_MAGIC_GATE
- 0x0B, /* Byte[50]: MG, MS, MSPro, MSXC */
-#else
- 0x09, /* Byte[50]: MS, MSPro, MSXC */
-#endif
- 0x00, /* Byte[51]: Category Specific Commands */
- 0x00, /* Byte[52]: Access Control and feature */
- 0x20, 0x20, 0x20, /* Byte[53:55] */
-};
-
-static int inquiry(struct scsi_cmnd *srb, struct rtsx_chip *chip)
-{
- unsigned int lun = SCSI_LUN(srb);
- char *inquiry_default = (char *)"Generic-xD/SD/M.S. 1.00 ";
- char *inquiry_sdms = (char *)"Generic-SD/MemoryStick 1.00 ";
- char *inquiry_sd = (char *)"Generic-SD/MMC 1.00 ";
- char *inquiry_ms = (char *)"Generic-MemoryStick 1.00 ";
- char *inquiry_string;
- unsigned char sendbytes;
- unsigned char *buf;
- u8 card = get_lun_card(chip, lun);
- int pro_formatter_flag = 0;
- unsigned char inquiry_buf[] = {
- QULIFIRE|DRCT_ACCESS_DEV,
- RMB_DISC|0x0D,
- 0x00,
- 0x01,
- 0x1f,
- 0x02,
- 0,
- REL_ADR|WBUS_32|WBUS_16|SYNC|LINKED|CMD_QUE|SFT_RE,
- };
-
- if (CHECK_LUN_MODE(chip, SD_MS_2LUN)) {
- if (chip->lun2card[lun] == SD_CARD)
- inquiry_string = inquiry_sd;
- else
- inquiry_string = inquiry_ms;
-
- } else if (CHECK_LUN_MODE(chip, SD_MS_1LUN)) {
- inquiry_string = inquiry_sdms;
- } else {
- inquiry_string = inquiry_default;
- }
-
- buf = vmalloc(scsi_bufflen(srb));
- if (buf == NULL)
- TRACE_RET(chip, TRANSPORT_ERROR);
-
-#ifdef SUPPORT_MAGIC_GATE
- if ((chip->mspro_formatter_enable) &&
- (chip->lun2card[lun] & MS_CARD))
-#else
- if (chip->mspro_formatter_enable)
-#endif
- {
- if (!card || (card == MS_CARD))
- pro_formatter_flag = 1;
- }
-
- if (pro_formatter_flag) {
- if (scsi_bufflen(srb) < 56)
- sendbytes = (unsigned char)(scsi_bufflen(srb));
- else
- sendbytes = 56;
-
- } else {
- if (scsi_bufflen(srb) < 36)
- sendbytes = (unsigned char)(scsi_bufflen(srb));
- else
- sendbytes = 36;
- }
-
- if (sendbytes > 8) {
- memcpy(buf, inquiry_buf, 8);
- memcpy(buf + 8, inquiry_string, sendbytes - 8);
- if (pro_formatter_flag) {
- /* Additional Length */
- buf[4] = 0x33;
- }
- } else {
- memcpy(buf, inquiry_buf, sendbytes);
- }
-
- if (pro_formatter_flag) {
- if (sendbytes > 36)
- memcpy(buf + 36, formatter_inquiry_str, sendbytes - 36);
- }
-
- scsi_set_resid(srb, 0);
-
- rtsx_stor_set_xfer_buf(buf, scsi_bufflen(srb), srb);
- vfree(buf);
-
- return TRANSPORT_GOOD;
-}
-
-
-static int start_stop_unit(struct scsi_cmnd *srb, struct rtsx_chip *chip)
-{
- unsigned int lun = SCSI_LUN(srb);
-
- scsi_set_resid(srb, scsi_bufflen(srb));
-
- if (srb->cmnd[1] == 1)
- return TRANSPORT_GOOD;
-
- switch (srb->cmnd[0x4]) {
- case STOP_MEDIUM:
- /* Media disabled */
- return TRANSPORT_GOOD;
-
- case UNLOAD_MEDIUM:
- /* Media shall be unload */
- if (check_card_ready(chip, lun))
- eject_card(chip, lun);
- return TRANSPORT_GOOD;
-
- case MAKE_MEDIUM_READY:
- case LOAD_MEDIUM:
- if (check_card_ready(chip, lun)) {
- return TRANSPORT_GOOD;
- } else {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_NOT_PRESENT);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
-
- break;
- }
-
- TRACE_RET(chip, TRANSPORT_ERROR);
-}
-
-
-static int allow_medium_removal(struct scsi_cmnd *srb, struct rtsx_chip *chip)
-{
- int prevent;
-
- prevent = srb->cmnd[4] & 0x1;
-
- scsi_set_resid(srb, 0);
-
- if (prevent) {
- set_sense_type(chip, SCSI_LUN(srb), SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
-
- return TRANSPORT_GOOD;
-}
-
-
-static int request_sense(struct scsi_cmnd *srb, struct rtsx_chip *chip)
-{
- struct sense_data_t *sense;
- unsigned int lun = SCSI_LUN(srb);
- struct ms_info *ms_card = &(chip->ms_card);
- unsigned char *tmp, *buf;
-
- sense = &(chip->sense_buffer[lun]);
-
- if ((get_lun_card(chip, lun) == MS_CARD) && ms_card->pro_under_formatting) {
- if (ms_card->format_status == FORMAT_SUCCESS) {
- set_sense_type(chip, lun, SENSE_TYPE_NO_SENSE);
- ms_card->pro_under_formatting = 0;
- ms_card->progress = 0;
- } else if (ms_card->format_status == FORMAT_IN_PROGRESS) {
- /* Logical Unit Not Ready Format in Progress */
- set_sense_data(chip, lun, CUR_ERR, 0x02, 0, 0x04, 0x04,
- 0, (u16)(ms_card->progress));
- } else {
- /* Format Command Failed */
- set_sense_type(chip, lun, SENSE_TYPE_FORMAT_CMD_FAILED);
- ms_card->pro_under_formatting = 0;
- ms_card->progress = 0;
- }
-
- rtsx_set_stat(chip, RTSX_STAT_RUN);
- }
-
- buf = vmalloc(scsi_bufflen(srb));
- if (buf == NULL)
- TRACE_RET(chip, TRANSPORT_ERROR);
-
- tmp = (unsigned char *)sense;
- memcpy(buf, tmp, scsi_bufflen(srb));
-
- rtsx_stor_set_xfer_buf(buf, scsi_bufflen(srb), srb);
- vfree(buf);
-
- scsi_set_resid(srb, 0);
- /* Reset Sense Data */
- set_sense_type(chip, lun, SENSE_TYPE_NO_SENSE);
- return TRANSPORT_GOOD;
-}
-
-static void ms_mode_sense(struct rtsx_chip *chip, u8 cmd,
- int lun, u8 *buf, int buf_len)
-{
- struct ms_info *ms_card = &(chip->ms_card);
- int sys_info_offset;
- int data_size = buf_len;
- int support_format = 0;
- int i = 0;
-
- if (cmd == MODE_SENSE) {
- sys_info_offset = 8;
- if (data_size > 0x68)
- data_size = 0x68;
-
- buf[i++] = 0x67; /* Mode Data Length */
- } else {
- sys_info_offset = 12;
- if (data_size > 0x6C)
- data_size = 0x6C;
-
- buf[i++] = 0x00; /* Mode Data Length (MSB) */
- buf[i++] = 0x6A; /* Mode Data Length (LSB) */
- }
-
- /* Medium Type Code */
- if (check_card_ready(chip, lun)) {
- if (CHK_MSXC(ms_card)) {
- support_format = 1;
- buf[i++] = 0x40;
- } else if (CHK_MSPRO(ms_card)) {
- support_format = 1;
- buf[i++] = 0x20;
- } else {
- buf[i++] = 0x10;
- }
-
- /* WP */
- if (check_card_wp(chip, lun))
- buf[i++] = 0x80;
- else
- buf[i++] = 0x00;
-
- } else {
- buf[i++] = 0x00; /* MediaType */
- buf[i++] = 0x00; /* WP */
- }
-
- buf[i++] = 0x00; /* Reserved */
-
- if (cmd == MODE_SENSE_10) {
- buf[i++] = 0x00; /* Reserved */
- buf[i++] = 0x00; /* Block descriptor length(MSB) */
- buf[i++] = 0x00; /* Block descriptor length(LSB) */
-
- /* The Following Data is the content of "Page 0x20" */
- if (data_size >= 9)
- buf[i++] = 0x20; /* Page Code */
- if (data_size >= 10)
- buf[i++] = 0x62; /* Page Length */
- if (data_size >= 11)
- buf[i++] = 0x00; /* No Access Control */
- if (data_size >= 12) {
- if (support_format)
- buf[i++] = 0xC0; /* SF, SGM */
- else
- buf[i++] = 0x00;
- }
- } else {
- /* The Following Data is the content of "Page 0x20" */
- if (data_size >= 5)
- buf[i++] = 0x20; /* Page Code */
- if (data_size >= 6)
- buf[i++] = 0x62; /* Page Length */
- if (data_size >= 7)
- buf[i++] = 0x00; /* No Access Control */
- if (data_size >= 8) {
- if (support_format)
- buf[i++] = 0xC0; /* SF, SGM */
- else
- buf[i++] = 0x00;
- }
- }
-
- if (data_size > sys_info_offset) {
- /* 96 Bytes Attribute Data */
- int len = data_size - sys_info_offset;
- len = (len < 96) ? len : 96;
-
- memcpy(buf + sys_info_offset, ms_card->raw_sys_info, len);
- }
-}
-
-static int mode_sense(struct scsi_cmnd *srb, struct rtsx_chip *chip)
-{
- unsigned int lun = SCSI_LUN(srb);
- unsigned int dataSize;
- int status;
- int pro_formatter_flag;
- unsigned char pageCode, *buf;
- u8 card = get_lun_card(chip, lun);
-
-#ifndef SUPPORT_MAGIC_GATE
- if (!check_card_ready(chip, lun)) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_NOT_PRESENT);
- scsi_set_resid(srb, scsi_bufflen(srb));
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
-#endif
-
- pro_formatter_flag = 0;
- dataSize = 8;
-#ifdef SUPPORT_MAGIC_GATE
- if ((chip->lun2card[lun] & MS_CARD)) {
- if (!card || (card == MS_CARD)) {
- dataSize = 108;
- if (chip->mspro_formatter_enable)
- pro_formatter_flag = 1;
- }
- }
-#else
- if (card == MS_CARD) {
- if (chip->mspro_formatter_enable) {
- pro_formatter_flag = 1;
- dataSize = 108;
- }
- }
-#endif
-
- buf = kmalloc(dataSize, GFP_KERNEL);
- if (buf == NULL)
- TRACE_RET(chip, TRANSPORT_ERROR);
-
- pageCode = srb->cmnd[2] & 0x3f;
-
- if ((pageCode == 0x3F) || (pageCode == 0x1C) ||
- (pageCode == 0x00) ||
- (pro_formatter_flag && (pageCode == 0x20))) {
- if (srb->cmnd[0] == MODE_SENSE) {
- if ((pageCode == 0x3F) || (pageCode == 0x20)) {
- ms_mode_sense(chip, srb->cmnd[0],
- lun, buf, dataSize);
- } else {
- dataSize = 4;
- buf[0] = 0x03;
- buf[1] = 0x00;
- if (check_card_wp(chip, lun))
- buf[2] = 0x80;
- else
- buf[2] = 0x00;
-
- buf[3] = 0x00;
- }
- } else {
- if ((pageCode == 0x3F) || (pageCode == 0x20)) {
- ms_mode_sense(chip, srb->cmnd[0],
- lun, buf, dataSize);
- } else {
- dataSize = 8;
- buf[0] = 0x00;
- buf[1] = 0x06;
- buf[2] = 0x00;
- if (check_card_wp(chip, lun))
- buf[3] = 0x80;
- else
- buf[3] = 0x00;
- buf[4] = 0x00;
- buf[5] = 0x00;
- buf[6] = 0x00;
- buf[7] = 0x00;
- }
- }
- status = TRANSPORT_GOOD;
- } else {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
- scsi_set_resid(srb, scsi_bufflen(srb));
- status = TRANSPORT_FAILED;
- }
-
- if (status == TRANSPORT_GOOD) {
- unsigned int len = min(scsi_bufflen(srb), dataSize);
- rtsx_stor_set_xfer_buf(buf, len, srb);
- scsi_set_resid(srb, scsi_bufflen(srb) - len);
- }
- kfree(buf);
-
- return status;
-}
-
-static int read_write(struct scsi_cmnd *srb, struct rtsx_chip *chip)
-{
-#ifdef SUPPORT_SD_LOCK
- struct sd_info *sd_card = &(chip->sd_card);
-#endif
- unsigned int lun = SCSI_LUN(srb);
- int retval;
- u32 start_sec;
- u16 sec_cnt;
-
- rtsx_disable_aspm(chip);
-
- if (chip->ss_en && (rtsx_get_stat(chip) == RTSX_STAT_SS)) {
- rtsx_exit_ss(chip);
- wait_timeout(100);
- }
- rtsx_set_stat(chip, RTSX_STAT_RUN);
-
- if (!check_card_ready(chip, lun) || (get_card_size(chip, lun) == 0)) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_NOT_PRESENT);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
-
- if (!(CHK_BIT(chip->lun_mc, lun))) {
- SET_BIT(chip->lun_mc, lun);
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_CHANGE);
- return TRANSPORT_FAILED;
- }
-
-#ifdef SUPPORT_SD_LOCK
- if (sd_card->sd_erase_status) {
- /* Accessing to any card is forbidden
- * until the erase procedure of SD is completed
- */
- RTSX_DEBUGP("SD card being erased!\n");
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_READ_FORBIDDEN);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
-
- if (get_lun_card(chip, lun) == SD_CARD) {
- if (sd_card->sd_lock_status & SD_LOCKED) {
- RTSX_DEBUGP("SD card locked!\n");
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_READ_FORBIDDEN);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
- }
-#endif
-
- if ((srb->cmnd[0] == READ_10) || (srb->cmnd[0] == WRITE_10)) {
- start_sec = ((u32)srb->cmnd[2] << 24) | ((u32)srb->cmnd[3] << 16) |
- ((u32)srb->cmnd[4] << 8) | ((u32)srb->cmnd[5]);
- sec_cnt = ((u16)(srb->cmnd[7]) << 8) | srb->cmnd[8];
- } else if ((srb->cmnd[0] == READ_6) || (srb->cmnd[0] == WRITE_6)) {
- start_sec = ((u32)(srb->cmnd[1] & 0x1F) << 16) |
- ((u32)srb->cmnd[2] << 8) | ((u32)srb->cmnd[3]);
- sec_cnt = srb->cmnd[4];
- } else if ((srb->cmnd[0] == VENDOR_CMND) && (srb->cmnd[1] == SCSI_APP_CMD) &&
- ((srb->cmnd[2] == PP_READ10) || (srb->cmnd[2] == PP_WRITE10))) {
- start_sec = ((u32)srb->cmnd[4] << 24) | ((u32)srb->cmnd[5] << 16) |
- ((u32)srb->cmnd[6] << 8) | ((u32)srb->cmnd[7]);
- sec_cnt = ((u16)(srb->cmnd[9]) << 8) | srb->cmnd[10];
- } else {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
-
- /* In some test, we will receive a start_sec like 0xFFFFFFFF.
- * In this situation, start_sec + sec_cnt will overflow, so we
- * need to judge start_sec at first
- */
- if ((start_sec > get_card_size(chip, lun)) ||
- ((start_sec + sec_cnt) > get_card_size(chip, lun))) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_LBA_OVER_RANGE);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
-
- if (sec_cnt == 0) {
- scsi_set_resid(srb, 0);
- return TRANSPORT_GOOD;
- }
-
- if (chip->rw_fail_cnt[lun] == 3) {
- RTSX_DEBUGP("read/write fail three times in succession\n");
- if (srb->sc_data_direction == DMA_FROM_DEVICE)
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_UNRECOVER_READ_ERR);
- else
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_WRITE_ERR);
-
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
-
- if (srb->sc_data_direction == DMA_TO_DEVICE) {
- if (check_card_wp(chip, lun)) {
- RTSX_DEBUGP("Write protected card!\n");
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_WRITE_PROTECT);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
- if (CHECK_PID(chip, 0x5209) && chip->max_payload) {
- u8 val = 0x10 | (chip->max_payload << 5);
- retval = rtsx_write_cfg_dw(chip, 0, 0x78, 0xFF, val);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, TRANSPORT_ERROR);
- }
- }
-
- retval = card_rw(srb, chip, start_sec, sec_cnt);
- if (retval != STATUS_SUCCESS) {
- if (chip->need_release & chip->lun2card[lun]) {
- chip->rw_fail_cnt[lun] = 0;
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_NOT_PRESENT);
- } else {
- chip->rw_fail_cnt[lun]++;
- if (srb->sc_data_direction == DMA_FROM_DEVICE)
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_UNRECOVER_READ_ERR);
- else
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_WRITE_ERR);
- }
- retval = TRANSPORT_FAILED;
- TRACE_GOTO(chip, Exit);
- } else {
- chip->rw_fail_cnt[lun] = 0;
- retval = TRANSPORT_GOOD;
- }
-
- scsi_set_resid(srb, 0);
-
-Exit:
- if (srb->sc_data_direction == DMA_TO_DEVICE) {
- if (CHECK_PID(chip, 0x5209) && chip->max_payload) {
- retval = rtsx_write_cfg_dw(chip, 0, 0x78, 0xFF, 0x10);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, TRANSPORT_ERROR);
- }
- }
-
- return retval;
-}
-
-static int read_format_capacity(struct scsi_cmnd *srb, struct rtsx_chip *chip)
-{
- unsigned char *buf;
- unsigned int lun = SCSI_LUN(srb);
- unsigned int buf_len;
- u8 card = get_lun_card(chip, lun);
- u32 card_size;
- int desc_cnt;
- int i = 0;
-
- if (!check_card_ready(chip, lun)) {
- if (!chip->mspro_formatter_enable) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_NOT_PRESENT);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
- }
-
- buf_len = (scsi_bufflen(srb) > 12) ? 0x14 : 12;
-
- buf = kmalloc(buf_len, GFP_KERNEL);
- if (buf == NULL)
- TRACE_RET(chip, TRANSPORT_ERROR);
-
- buf[i++] = 0;
- buf[i++] = 0;
- buf[i++] = 0;
-
- /* Capacity List Length */
- if ((buf_len > 12) && chip->mspro_formatter_enable &&
- (chip->lun2card[lun] & MS_CARD) &&
- (!card || (card == MS_CARD))) {
- buf[i++] = 0x10;
- desc_cnt = 2;
- } else {
- buf[i++] = 0x08;
- desc_cnt = 1;
- }
-
- while (desc_cnt) {
- if (check_card_ready(chip, lun)) {
- card_size = get_card_size(chip, lun);
- buf[i++] = (unsigned char)(card_size >> 24);
- buf[i++] = (unsigned char)(card_size >> 16);
- buf[i++] = (unsigned char)(card_size >> 8);
- buf[i++] = (unsigned char)card_size;
-
- if (desc_cnt == 2)
- buf[i++] = 2;
- else
- buf[i++] = 0;
- } else {
- buf[i++] = 0xFF;
- buf[i++] = 0xFF;
- buf[i++] = 0xFF;
- buf[i++] = 0xFF;
-
- if (desc_cnt == 2)
- buf[i++] = 3;
- else
- buf[i++] = 0;
- }
-
- buf[i++] = 0x00;
- buf[i++] = 0x02;
- buf[i++] = 0x00;
-
- desc_cnt--;
- }
-
- buf_len = min(scsi_bufflen(srb), buf_len);
- rtsx_stor_set_xfer_buf(buf, buf_len, srb);
- kfree(buf);
-
- scsi_set_resid(srb, scsi_bufflen(srb) - buf_len);
-
- return TRANSPORT_GOOD;
-}
-
-static int read_capacity(struct scsi_cmnd *srb, struct rtsx_chip *chip)
-{
- unsigned char *buf;
- unsigned int lun = SCSI_LUN(srb);
- u32 card_size;
-
- if (!check_card_ready(chip, lun)) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_NOT_PRESENT);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
-
- if (!(CHK_BIT(chip->lun_mc, lun))) {
- SET_BIT(chip->lun_mc, lun);
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_CHANGE);
- return TRANSPORT_FAILED;
- }
-
- buf = kmalloc(8, GFP_KERNEL);
- if (buf == NULL)
- TRACE_RET(chip, TRANSPORT_ERROR);
-
- card_size = get_card_size(chip, lun);
- buf[0] = (unsigned char)((card_size - 1) >> 24);
- buf[1] = (unsigned char)((card_size - 1) >> 16);
- buf[2] = (unsigned char)((card_size - 1) >> 8);
- buf[3] = (unsigned char)(card_size - 1);
-
- buf[4] = 0x00;
- buf[5] = 0x00;
- buf[6] = 0x02;
- buf[7] = 0x00;
-
- rtsx_stor_set_xfer_buf(buf, scsi_bufflen(srb), srb);
- kfree(buf);
-
- scsi_set_resid(srb, 0);
-
- return TRANSPORT_GOOD;
-}
-
-static int read_eeprom(struct scsi_cmnd *srb, struct rtsx_chip *chip)
-{
- unsigned short len, i;
- int retval;
- u8 *buf;
-
- rtsx_disable_aspm(chip);
-
- if (chip->ss_en && (rtsx_get_stat(chip) == RTSX_STAT_SS)) {
- rtsx_exit_ss(chip);
- wait_timeout(100);
- }
- rtsx_set_stat(chip, RTSX_STAT_RUN);
-
- len = ((u16)srb->cmnd[4] << 8) | srb->cmnd[5];
-
- buf = (u8 *)vmalloc(len);
- if (!buf)
- TRACE_RET(chip, TRANSPORT_ERROR);
-
- retval = rtsx_force_power_on(chip, SSC_PDCTL);
- if (retval != STATUS_SUCCESS) {
- vfree(buf);
- set_sense_type(chip, SCSI_LUN(srb), SENSE_TYPE_MEDIA_UNRECOVER_READ_ERR);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
-
- for (i = 0; i < len; i++) {
- retval = spi_read_eeprom(chip, i, buf + i);
- if (retval != STATUS_SUCCESS) {
- vfree(buf);
- set_sense_type(chip, SCSI_LUN(srb), SENSE_TYPE_MEDIA_UNRECOVER_READ_ERR);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
- }
-
- len = (unsigned short)min(scsi_bufflen(srb), (unsigned int)len);
- rtsx_stor_set_xfer_buf(buf, len, srb);
- scsi_set_resid(srb, scsi_bufflen(srb) - len);
-
- vfree(buf);
-
- return TRANSPORT_GOOD;
-}
-
-static int write_eeprom(struct scsi_cmnd *srb, struct rtsx_chip *chip)
-{
- unsigned short len, i;
- int retval;
- u8 *buf;
-
- rtsx_disable_aspm(chip);
-
- if (chip->ss_en && (rtsx_get_stat(chip) == RTSX_STAT_SS)) {
- rtsx_exit_ss(chip);
- wait_timeout(100);
- }
- rtsx_set_stat(chip, RTSX_STAT_RUN);
-
- len = ((u16)srb->cmnd[4] << 8) | srb->cmnd[5];
-
- retval = rtsx_force_power_on(chip, SSC_PDCTL);
- if (retval != STATUS_SUCCESS) {
- set_sense_type(chip, SCSI_LUN(srb), SENSE_TYPE_MEDIA_WRITE_ERR);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
-
- if (len == 511) {
- retval = spi_erase_eeprom_chip(chip);
- if (retval != STATUS_SUCCESS) {
- set_sense_type(chip, SCSI_LUN(srb), SENSE_TYPE_MEDIA_WRITE_ERR);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
- } else {
- len = (unsigned short)min(scsi_bufflen(srb), (unsigned int)len);
- buf = (u8 *)vmalloc(len);
- if (buf == NULL)
- TRACE_RET(chip, TRANSPORT_ERROR);
-
- rtsx_stor_get_xfer_buf(buf, len, srb);
- scsi_set_resid(srb, scsi_bufflen(srb) - len);
-
- for (i = 0; i < len; i++) {
- retval = spi_write_eeprom(chip, i, buf[i]);
- if (retval != STATUS_SUCCESS) {
- vfree(buf);
- set_sense_type(chip, SCSI_LUN(srb), SENSE_TYPE_MEDIA_WRITE_ERR);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
- }
-
- vfree(buf);
- }
-
- return TRANSPORT_GOOD;
-}
-
-static int read_mem(struct scsi_cmnd *srb, struct rtsx_chip *chip)
-{
- unsigned short addr, len, i;
- int retval;
- u8 *buf;
-
- rtsx_disable_aspm(chip);
-
- if (chip->ss_en && (rtsx_get_stat(chip) == RTSX_STAT_SS)) {
- rtsx_exit_ss(chip);
- wait_timeout(100);
- }
- rtsx_set_stat(chip, RTSX_STAT_RUN);
-
- addr = ((u16)srb->cmnd[2] << 8) | srb->cmnd[3];
- len = ((u16)srb->cmnd[4] << 8) | srb->cmnd[5];
-
- if (addr < 0xFC00) {
- set_sense_type(chip, SCSI_LUN(srb), SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
-
- buf = (u8 *)vmalloc(len);
- if (!buf)
- TRACE_RET(chip, TRANSPORT_ERROR);
-
- retval = rtsx_force_power_on(chip, SSC_PDCTL);
- if (retval != STATUS_SUCCESS) {
- vfree(buf);
- set_sense_type(chip, SCSI_LUN(srb), SENSE_TYPE_MEDIA_WRITE_ERR);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
-
- for (i = 0; i < len; i++) {
- retval = rtsx_read_register(chip, addr + i, buf + i);
- if (retval != STATUS_SUCCESS) {
- vfree(buf);
- set_sense_type(chip, SCSI_LUN(srb), SENSE_TYPE_MEDIA_UNRECOVER_READ_ERR);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
- }
-
- len = (unsigned short)min(scsi_bufflen(srb), (unsigned int)len);
- rtsx_stor_set_xfer_buf(buf, len, srb);
- scsi_set_resid(srb, scsi_bufflen(srb) - len);
-
- vfree(buf);
-
- return TRANSPORT_GOOD;
-}
-
-static int write_mem(struct scsi_cmnd *srb, struct rtsx_chip *chip)
-{
- unsigned short addr, len, i;
- int retval;
- u8 *buf;
-
- rtsx_disable_aspm(chip);
-
- if (chip->ss_en && (rtsx_get_stat(chip) == RTSX_STAT_SS)) {
- rtsx_exit_ss(chip);
- wait_timeout(100);
- }
- rtsx_set_stat(chip, RTSX_STAT_RUN);
-
- addr = ((u16)srb->cmnd[2] << 8) | srb->cmnd[3];
- len = ((u16)srb->cmnd[4] << 8) | srb->cmnd[5];
-
- if (addr < 0xFC00) {
- set_sense_type(chip, SCSI_LUN(srb), SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
-
- len = (unsigned short)min(scsi_bufflen(srb), (unsigned int)len);
- buf = (u8 *)vmalloc(len);
- if (buf == NULL)
- TRACE_RET(chip, TRANSPORT_ERROR);
-
- rtsx_stor_get_xfer_buf(buf, len, srb);
- scsi_set_resid(srb, scsi_bufflen(srb) - len);
-
- retval = rtsx_force_power_on(chip, SSC_PDCTL);
- if (retval != STATUS_SUCCESS) {
- vfree(buf);
- set_sense_type(chip, SCSI_LUN(srb), SENSE_TYPE_MEDIA_WRITE_ERR);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
-
- for (i = 0; i < len; i++) {
- retval = rtsx_write_register(chip, addr + i, 0xFF, buf[i]);
- if (retval != STATUS_SUCCESS) {
- vfree(buf);
- set_sense_type(chip, SCSI_LUN(srb), SENSE_TYPE_MEDIA_WRITE_ERR);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
- }
-
- vfree(buf);
-
- return TRANSPORT_GOOD;
-}
-
-static int get_sd_csd(struct scsi_cmnd *srb, struct rtsx_chip *chip)
-{
- struct sd_info *sd_card = &(chip->sd_card);
- unsigned int lun = SCSI_LUN(srb);
-
- if (!check_card_ready(chip, lun)) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_NOT_PRESENT);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
-
- if (get_lun_card(chip, lun) != SD_CARD) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_UNRECOVER_READ_ERR);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
-
- scsi_set_resid(srb, 0);
- rtsx_stor_set_xfer_buf(sd_card->raw_csd, scsi_bufflen(srb), srb);
-
- return TRANSPORT_GOOD;
-}
-
-static int toggle_gpio_cmd(struct scsi_cmnd *srb, struct rtsx_chip *chip)
-{
- u8 gpio = srb->cmnd[2];
-
- rtsx_disable_aspm(chip);
-
- if (chip->ss_en && (rtsx_get_stat(chip) == RTSX_STAT_SS)) {
- rtsx_exit_ss(chip);
- wait_timeout(100);
- }
- rtsx_set_stat(chip, RTSX_STAT_RUN);
-
- if (gpio > 3)
- gpio = 1;
- toggle_gpio(chip, gpio);
-
- return TRANSPORT_GOOD;
-}
-
-#ifdef _MSG_TRACE
-static int trace_msg_cmd(struct scsi_cmnd *srb, struct rtsx_chip *chip)
-{
- unsigned char *ptr, *buf = NULL;
- int i, msg_cnt;
- u8 clear;
- unsigned int buf_len;
-
- buf_len = 4 + ((2 + MSG_FUNC_LEN + MSG_FILE_LEN + TIME_VAL_LEN) * TRACE_ITEM_CNT);
-
- if ((scsi_bufflen(srb) < buf_len) || (scsi_sglist(srb) == NULL)) {
- set_sense_type(chip, SCSI_LUN(srb), SENSE_TYPE_MEDIA_UNRECOVER_READ_ERR);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
-
- clear = srb->cmnd[2];
-
- buf = (unsigned char *)vmalloc(scsi_bufflen(srb));
- if (buf == NULL)
- TRACE_RET(chip, TRANSPORT_ERROR);
- ptr = buf;
-
- if (chip->trace_msg[chip->msg_idx].valid)
- msg_cnt = TRACE_ITEM_CNT;
- else
- msg_cnt = chip->msg_idx;
-
- *(ptr++) = (u8)(msg_cnt >> 24);
- *(ptr++) = (u8)(msg_cnt >> 16);
- *(ptr++) = (u8)(msg_cnt >> 8);
- *(ptr++) = (u8)msg_cnt;
- RTSX_DEBUGP("Trace message count is %d\n", msg_cnt);
-
- for (i = 1; i <= msg_cnt; i++) {
- int j, idx;
-
- idx = chip->msg_idx - i;
- if (idx < 0)
- idx += TRACE_ITEM_CNT;
-
- *(ptr++) = (u8)(chip->trace_msg[idx].line >> 8);
- *(ptr++) = (u8)(chip->trace_msg[idx].line);
- for (j = 0; j < MSG_FUNC_LEN; j++)
- *(ptr++) = chip->trace_msg[idx].func[j];
-
- for (j = 0; j < MSG_FILE_LEN; j++)
- *(ptr++) = chip->trace_msg[idx].file[j];
-
- for (j = 0; j < TIME_VAL_LEN; j++)
- *(ptr++) = chip->trace_msg[idx].timeval_buf[j];
- }
-
- rtsx_stor_set_xfer_buf(buf, scsi_bufflen(srb), srb);
- vfree(buf);
-
- if (clear) {
- chip->msg_idx = 0;
- for (i = 0; i < TRACE_ITEM_CNT; i++)
- chip->trace_msg[i].valid = 0;
- }
-
- scsi_set_resid(srb, 0);
- return TRANSPORT_GOOD;
-}
-#endif
-
-static int read_host_reg(struct scsi_cmnd *srb, struct rtsx_chip *chip)
-{
- u8 addr, buf[4];
- u32 val;
- unsigned int len;
-
- rtsx_disable_aspm(chip);
-
- if (chip->ss_en && (rtsx_get_stat(chip) == RTSX_STAT_SS)) {
- rtsx_exit_ss(chip);
- wait_timeout(100);
- }
- rtsx_set_stat(chip, RTSX_STAT_RUN);
-
- addr = srb->cmnd[4];
-
- val = rtsx_readl(chip, addr);
- RTSX_DEBUGP("Host register (0x%x): 0x%x\n", addr, val);
-
- buf[0] = (u8)(val >> 24);
- buf[1] = (u8)(val >> 16);
- buf[2] = (u8)(val >> 8);
- buf[3] = (u8)val;
-
- len = min(scsi_bufflen(srb), (unsigned int)4);
- rtsx_stor_set_xfer_buf(buf, len, srb);
- scsi_set_resid(srb, scsi_bufflen(srb) - len);
-
- return TRANSPORT_GOOD;
-}
-
-static int write_host_reg(struct scsi_cmnd *srb, struct rtsx_chip *chip)
-{
- u8 addr, buf[4];
- u32 val;
- unsigned int len;
-
- rtsx_disable_aspm(chip);
-
- if (chip->ss_en && (rtsx_get_stat(chip) == RTSX_STAT_SS)) {
- rtsx_exit_ss(chip);
- wait_timeout(100);
- }
- rtsx_set_stat(chip, RTSX_STAT_RUN);
-
- addr = srb->cmnd[4];
-
- len = min(scsi_bufflen(srb), (unsigned int)4);
- rtsx_stor_get_xfer_buf(buf, len, srb);
- scsi_set_resid(srb, scsi_bufflen(srb) - len);
-
- val = ((u32)buf[0] << 24) | ((u32)buf[1] << 16) | ((u32)buf[2] << 8) | buf[3];
-
- rtsx_writel(chip, addr, val);
-
- return TRANSPORT_GOOD;
-}
-
-static int set_variable(struct scsi_cmnd *srb, struct rtsx_chip *chip)
-{
- unsigned lun = SCSI_LUN(srb);
-
- if (srb->cmnd[3] == 1) {
- /* Variable Clock */
- struct xd_info *xd_card = &(chip->xd_card);
- struct sd_info *sd_card = &(chip->sd_card);
- struct ms_info *ms_card = &(chip->ms_card);
-
- switch (srb->cmnd[4]) {
- case XD_CARD:
- xd_card->xd_clock = srb->cmnd[5];
- break;
-
- case SD_CARD:
- sd_card->sd_clock = srb->cmnd[5];
- break;
-
- case MS_CARD:
- ms_card->ms_clock = srb->cmnd[5];
- break;
-
- default:
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
- } else if (srb->cmnd[3] == 2) {
- if (srb->cmnd[4]) {
- chip->blink_led = 1;
- } else {
- int retval;
-
- chip->blink_led = 0;
-
- rtsx_disable_aspm(chip);
-
- if (chip->ss_en && (rtsx_get_stat(chip) == RTSX_STAT_SS)) {
- rtsx_exit_ss(chip);
- wait_timeout(100);
- }
- rtsx_set_stat(chip, RTSX_STAT_RUN);
-
- retval = rtsx_force_power_on(chip, SSC_PDCTL);
- if (retval != STATUS_SUCCESS) {
- set_sense_type(chip, SCSI_LUN(srb), SENSE_TYPE_MEDIA_WRITE_ERR);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
-
- turn_off_led(chip, LED_GPIO);
- }
- } else {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
-
- return TRANSPORT_GOOD;
-}
-
-static int get_variable(struct scsi_cmnd *srb, struct rtsx_chip *chip)
-{
- unsigned int lun = SCSI_LUN(srb);
-
- if (srb->cmnd[3] == 1) {
- struct xd_info *xd_card = &(chip->xd_card);
- struct sd_info *sd_card = &(chip->sd_card);
- struct ms_info *ms_card = &(chip->ms_card);
- u8 tmp;
-
- switch (srb->cmnd[4]) {
- case XD_CARD:
- tmp = (u8)(xd_card->xd_clock);
- break;
-
- case SD_CARD:
- tmp = (u8)(sd_card->sd_clock);
- break;
-
- case MS_CARD:
- tmp = (u8)(ms_card->ms_clock);
- break;
-
- default:
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
-
- rtsx_stor_set_xfer_buf(&tmp, 1, srb);
- } else if (srb->cmnd[3] == 2) {
- u8 tmp = chip->blink_led;
- rtsx_stor_set_xfer_buf(&tmp, 1, srb);
- } else {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
-
- return TRANSPORT_GOOD;
-}
-
-static int dma_access_ring_buffer(struct scsi_cmnd *srb, struct rtsx_chip *chip)
-{
- int retval;
- unsigned int lun = SCSI_LUN(srb);
- u16 len;
-
- rtsx_disable_aspm(chip);
-
- if (chip->ss_en && (rtsx_get_stat(chip) == RTSX_STAT_SS)) {
- rtsx_exit_ss(chip);
- wait_timeout(100);
- }
- rtsx_set_stat(chip, RTSX_STAT_RUN);
-
- len = ((u16)(srb->cmnd[4]) << 8) | srb->cmnd[5];
- len = min(len, (u16)scsi_bufflen(srb));
-
- if (srb->sc_data_direction == DMA_FROM_DEVICE)
- RTSX_DEBUGP("Read from device\n");
- else
- RTSX_DEBUGP("Write to device\n");
-
- retval = rtsx_transfer_data(chip, 0, scsi_sglist(srb), len,
- scsi_sg_count(srb), srb->sc_data_direction, 1000);
- if (retval < 0) {
- if (srb->sc_data_direction == DMA_FROM_DEVICE)
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_UNRECOVER_READ_ERR);
- else
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_WRITE_ERR);
-
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
- scsi_set_resid(srb, 0);
-
- return TRANSPORT_GOOD;
-}
-
-static int get_dev_status(struct scsi_cmnd *srb, struct rtsx_chip *chip)
-{
- struct sd_info *sd_card = &(chip->sd_card);
- struct ms_info *ms_card = &(chip->ms_card);
- int buf_len;
- unsigned int lun = SCSI_LUN(srb);
- u8 card = get_lun_card(chip, lun);
- u8 status[32];
-#ifdef SUPPORT_OCP
- u8 oc_now_mask = 0, oc_ever_mask = 0;
-#endif
-
- memset(status, 0, 32);
-
- status[0] = (u8)(chip->product_id);
- status[1] = chip->ic_version;
-
- if (chip->auto_delink_en)
- status[2] = 0x10;
- else
- status[2] = 0x00;
-
- status[3] = 20;
- status[4] = 10;
- status[5] = 05;
- status[6] = 21;
-
- if (chip->card_wp)
- status[7] = 0x20;
- else
- status[7] = 0x00;
-
-#ifdef SUPPORT_OCP
- status[8] = 0;
- if (CHECK_LUN_MODE(chip, SD_MS_2LUN) && (chip->lun2card[lun] == MS_CARD)) {
- oc_now_mask = MS_OC_NOW;
- oc_ever_mask = MS_OC_EVER;
- } else {
- oc_now_mask = SD_OC_NOW;
- oc_ever_mask = SD_OC_EVER;
- }
-
- if (chip->ocp_stat & oc_now_mask)
- status[8] |= 0x02;
-
- if (chip->ocp_stat & oc_ever_mask)
- status[8] |= 0x01;
-#endif
-
- if (card == SD_CARD) {
- if (CHK_SD(sd_card)) {
- if (CHK_SD_HCXC(sd_card)) {
- if (sd_card->capacity > 0x4000000)
- status[0x0E] = 0x02;
- else
- status[0x0E] = 0x01;
- } else {
- status[0x0E] = 0x00;
- }
-
- if (CHK_SD_SDR104(sd_card))
- status[0x0F] = 0x03;
- else if (CHK_SD_DDR50(sd_card))
- status[0x0F] = 0x04;
- else if (CHK_SD_SDR50(sd_card))
- status[0x0F] = 0x02;
- else if (CHK_SD_HS(sd_card))
- status[0x0F] = 0x01;
- else
- status[0x0F] = 0x00;
- } else {
- if (CHK_MMC_SECTOR_MODE(sd_card))
- status[0x0E] = 0x01;
- else
- status[0x0E] = 0x00;
-
- if (CHK_MMC_DDR52(sd_card))
- status[0x0F] = 0x03;
- else if (CHK_MMC_52M(sd_card))
- status[0x0F] = 0x02;
- else if (CHK_MMC_26M(sd_card))
- status[0x0F] = 0x01;
- else
- status[0x0F] = 0x00;
- }
- } else if (card == MS_CARD) {
- if (CHK_MSPRO(ms_card)) {
- if (CHK_MSXC(ms_card))
- status[0x0E] = 0x01;
- else
- status[0x0E] = 0x00;
-
- if (CHK_HG8BIT(ms_card))
- status[0x0F] = 0x01;
- else
- status[0x0F] = 0x00;
- }
- }
-
-#ifdef SUPPORT_SD_LOCK
- if (card == SD_CARD) {
- status[0x17] = 0x80;
- if (sd_card->sd_erase_status)
- status[0x17] |= 0x01;
- if (sd_card->sd_lock_status & SD_LOCKED) {
- status[0x17] |= 0x02;
- status[0x07] |= 0x40;
- }
- if (sd_card->sd_lock_status & SD_PWD_EXIST)
- status[0x17] |= 0x04;
- } else {
- status[0x17] = 0x00;
- }
-
- RTSX_DEBUGP("status[0x17] = 0x%x\n", status[0x17]);
-#endif
-
- status[0x18] = 0x8A;
- status[0x1A] = 0x28;
-#ifdef SUPPORT_SD_LOCK
- status[0x1F] = 0x01;
-#endif
-
- buf_len = min(scsi_bufflen(srb), (unsigned int)sizeof(status));
- rtsx_stor_set_xfer_buf(status, buf_len, srb);
- scsi_set_resid(srb, scsi_bufflen(srb) - buf_len);
-
- return TRANSPORT_GOOD;
-}
-
-static int set_chip_mode(struct scsi_cmnd *srb, struct rtsx_chip *chip)
-{
- int phy_debug_mode;
- int retval;
- u16 reg;
-
- if (!CHECK_PID(chip, 0x5208)) {
- set_sense_type(chip, SCSI_LUN(srb), SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
-
- phy_debug_mode = (int)(srb->cmnd[3]);
-
- if (phy_debug_mode) {
- chip->phy_debug_mode = 1;
- retval = rtsx_write_register(chip, CDRESUMECTL, 0x77, 0);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, TRANSPORT_FAILED);
-
- rtsx_disable_bus_int(chip);
-
- retval = rtsx_read_phy_register(chip, 0x1C, ®);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, TRANSPORT_FAILED);
-
- reg |= 0x0001;
- retval = rtsx_write_phy_register(chip, 0x1C, reg);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, TRANSPORT_FAILED);
- } else {
- chip->phy_debug_mode = 0;
- retval = rtsx_write_register(chip, CDRESUMECTL, 0x77, 0x77);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, TRANSPORT_FAILED);
-
- rtsx_enable_bus_int(chip);
-
- retval = rtsx_read_phy_register(chip, 0x1C, ®);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, TRANSPORT_FAILED);
-
- reg &= 0xFFFE;
- retval = rtsx_write_phy_register(chip, 0x1C, reg);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
-
- return TRANSPORT_GOOD;
-}
-
-static int rw_mem_cmd_buf(struct scsi_cmnd *srb, struct rtsx_chip *chip)
-{
- int retval = STATUS_SUCCESS;
- unsigned int lun = SCSI_LUN(srb);
- u8 cmd_type, mask, value, idx;
- u16 addr;
-
- rtsx_disable_aspm(chip);
-
- if (chip->ss_en && (rtsx_get_stat(chip) == RTSX_STAT_SS)) {
- rtsx_exit_ss(chip);
- wait_timeout(100);
- }
- rtsx_set_stat(chip, RTSX_STAT_RUN);
-
- switch (srb->cmnd[3]) {
- case INIT_BATCHCMD:
- rtsx_init_cmd(chip);
- break;
-
- case ADD_BATCHCMD:
- cmd_type = srb->cmnd[4];
- if (cmd_type > 2) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
- addr = (srb->cmnd[5] << 8) | srb->cmnd[6];
- mask = srb->cmnd[7];
- value = srb->cmnd[8];
- rtsx_add_cmd(chip, cmd_type, addr, mask, value);
- break;
-
- case SEND_BATCHCMD:
- retval = rtsx_send_cmd(chip, 0, 1000);
- break;
-
- case GET_BATCHRSP:
- idx = srb->cmnd[4];
- value = *(rtsx_get_cmd_data(chip) + idx);
- if (scsi_bufflen(srb) < 1) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
- rtsx_stor_set_xfer_buf(&value, 1, srb);
- scsi_set_resid(srb, 0);
- break;
-
- default:
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
-
- if (retval != STATUS_SUCCESS) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_WRITE_ERR);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
-
- return TRANSPORT_GOOD;
-}
-
-static int suit_cmd(struct scsi_cmnd *srb, struct rtsx_chip *chip)
-{
- int result;
-
- switch (srb->cmnd[3]) {
- case INIT_BATCHCMD:
- case ADD_BATCHCMD:
- case SEND_BATCHCMD:
- case GET_BATCHRSP:
- result = rw_mem_cmd_buf(srb, chip);
- break;
- default:
- result = TRANSPORT_ERROR;
- }
-
- return result;
-}
-
-static int read_phy_register(struct scsi_cmnd *srb, struct rtsx_chip *chip)
-{
- unsigned short addr, len, i;
- int retval;
- u8 *buf;
- u16 val;
-
- rtsx_disable_aspm(chip);
-
- if (chip->ss_en && (rtsx_get_stat(chip) == RTSX_STAT_SS)) {
- rtsx_exit_ss(chip);
- wait_timeout(100);
- }
- rtsx_set_stat(chip, RTSX_STAT_RUN);
-
- addr = ((u16)srb->cmnd[4] << 8) | srb->cmnd[5];
- len = ((u16)srb->cmnd[6] << 8) | srb->cmnd[7];
-
- if (len % 2)
- len -= len % 2;
-
- if (len) {
- buf = (u8 *)vmalloc(len);
- if (!buf)
- TRACE_RET(chip, TRANSPORT_ERROR);
-
- retval = rtsx_force_power_on(chip, SSC_PDCTL);
- if (retval != STATUS_SUCCESS) {
- vfree(buf);
- set_sense_type(chip, SCSI_LUN(srb), SENSE_TYPE_MEDIA_UNRECOVER_READ_ERR);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
-
- for (i = 0; i < len / 2; i++) {
- retval = rtsx_read_phy_register(chip, addr + i, &val);
- if (retval != STATUS_SUCCESS) {
- vfree(buf);
- set_sense_type(chip, SCSI_LUN(srb), SENSE_TYPE_MEDIA_UNRECOVER_READ_ERR);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
-
- buf[2*i] = (u8)(val >> 8);
- buf[2*i+1] = (u8)val;
- }
-
- len = (unsigned short)min(scsi_bufflen(srb), (unsigned int)len);
- rtsx_stor_set_xfer_buf(buf, len, srb);
- scsi_set_resid(srb, scsi_bufflen(srb) - len);
-
- vfree(buf);
- }
-
- return TRANSPORT_GOOD;
-}
-
-static int write_phy_register(struct scsi_cmnd *srb, struct rtsx_chip *chip)
-{
- unsigned short addr, len, i;
- int retval;
- u8 *buf;
- u16 val;
-
- rtsx_disable_aspm(chip);
-
- if (chip->ss_en && (rtsx_get_stat(chip) == RTSX_STAT_SS)) {
- rtsx_exit_ss(chip);
- wait_timeout(100);
- }
- rtsx_set_stat(chip, RTSX_STAT_RUN);
-
- addr = ((u16)srb->cmnd[4] << 8) | srb->cmnd[5];
- len = ((u16)srb->cmnd[6] << 8) | srb->cmnd[7];
-
- if (len % 2)
- len -= len % 2;
-
- if (len) {
- len = (unsigned short)min(scsi_bufflen(srb), (unsigned int)len);
-
- buf = (u8 *)vmalloc(len);
- if (buf == NULL)
- TRACE_RET(chip, TRANSPORT_ERROR);
-
- rtsx_stor_get_xfer_buf(buf, len, srb);
- scsi_set_resid(srb, scsi_bufflen(srb) - len);
-
- retval = rtsx_force_power_on(chip, SSC_PDCTL);
- if (retval != STATUS_SUCCESS) {
- vfree(buf);
- set_sense_type(chip, SCSI_LUN(srb), SENSE_TYPE_MEDIA_WRITE_ERR);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
-
- for (i = 0; i < len / 2; i++) {
- val = ((u16)buf[2*i] << 8) | buf[2*i+1];
- retval = rtsx_write_phy_register(chip, addr + i, val);
- if (retval != STATUS_SUCCESS) {
- vfree(buf);
- set_sense_type(chip, SCSI_LUN(srb), SENSE_TYPE_MEDIA_WRITE_ERR);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
- }
-
- vfree(buf);
- }
-
- return TRANSPORT_GOOD;
-}
-
-static int erase_eeprom2(struct scsi_cmnd *srb, struct rtsx_chip *chip)
-{
- unsigned short addr;
- int retval;
- u8 mode;
-
- rtsx_disable_aspm(chip);
-
- if (chip->ss_en && (rtsx_get_stat(chip) == RTSX_STAT_SS)) {
- rtsx_exit_ss(chip);
- wait_timeout(100);
- }
- rtsx_set_stat(chip, RTSX_STAT_RUN);
-
- retval = rtsx_force_power_on(chip, SSC_PDCTL);
- if (retval != STATUS_SUCCESS) {
- set_sense_type(chip, SCSI_LUN(srb), SENSE_TYPE_MEDIA_WRITE_ERR);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
-
- mode = srb->cmnd[3];
- addr = ((u16)srb->cmnd[4] << 8) | srb->cmnd[5];
-
- if (mode == 0) {
- retval = spi_erase_eeprom_chip(chip);
- if (retval != STATUS_SUCCESS) {
- set_sense_type(chip, SCSI_LUN(srb), SENSE_TYPE_MEDIA_WRITE_ERR);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
- } else if (mode == 1) {
- retval = spi_erase_eeprom_byte(chip, addr);
- if (retval != STATUS_SUCCESS) {
- set_sense_type(chip, SCSI_LUN(srb), SENSE_TYPE_MEDIA_WRITE_ERR);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
- } else {
- set_sense_type(chip, SCSI_LUN(srb), SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
-
- return TRANSPORT_GOOD;
-}
-
-static int read_eeprom2(struct scsi_cmnd *srb, struct rtsx_chip *chip)
-{
- unsigned short addr, len, i;
- int retval;
- u8 *buf;
-
- rtsx_disable_aspm(chip);
-
- if (chip->ss_en && (rtsx_get_stat(chip) == RTSX_STAT_SS)) {
- rtsx_exit_ss(chip);
- wait_timeout(100);
- }
- rtsx_set_stat(chip, RTSX_STAT_RUN);
-
- addr = ((u16)srb->cmnd[4] << 8) | srb->cmnd[5];
- len = ((u16)srb->cmnd[6] << 8) | srb->cmnd[7];
-
- buf = (u8 *)vmalloc(len);
- if (!buf)
- TRACE_RET(chip, TRANSPORT_ERROR);
-
- retval = rtsx_force_power_on(chip, SSC_PDCTL);
- if (retval != STATUS_SUCCESS) {
- vfree(buf);
- set_sense_type(chip, SCSI_LUN(srb), SENSE_TYPE_MEDIA_UNRECOVER_READ_ERR);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
-
- for (i = 0; i < len; i++) {
- retval = spi_read_eeprom(chip, addr + i, buf + i);
- if (retval != STATUS_SUCCESS) {
- vfree(buf);
- set_sense_type(chip, SCSI_LUN(srb), SENSE_TYPE_MEDIA_UNRECOVER_READ_ERR);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
- }
-
- len = (unsigned short)min(scsi_bufflen(srb), (unsigned int)len);
- rtsx_stor_set_xfer_buf(buf, len, srb);
- scsi_set_resid(srb, scsi_bufflen(srb) - len);
-
- vfree(buf);
-
- return TRANSPORT_GOOD;
-}
-
-static int write_eeprom2(struct scsi_cmnd *srb, struct rtsx_chip *chip)
-{
- unsigned short addr, len, i;
- int retval;
- u8 *buf;
-
- rtsx_disable_aspm(chip);
-
- if (chip->ss_en && (rtsx_get_stat(chip) == RTSX_STAT_SS)) {
- rtsx_exit_ss(chip);
- wait_timeout(100);
- }
- rtsx_set_stat(chip, RTSX_STAT_RUN);
-
- addr = ((u16)srb->cmnd[4] << 8) | srb->cmnd[5];
- len = ((u16)srb->cmnd[6] << 8) | srb->cmnd[7];
-
- len = (unsigned short)min(scsi_bufflen(srb), (unsigned int)len);
- buf = (u8 *)vmalloc(len);
- if (buf == NULL)
- TRACE_RET(chip, TRANSPORT_ERROR);
-
- rtsx_stor_get_xfer_buf(buf, len, srb);
- scsi_set_resid(srb, scsi_bufflen(srb) - len);
-
- retval = rtsx_force_power_on(chip, SSC_PDCTL);
- if (retval != STATUS_SUCCESS) {
- vfree(buf);
- set_sense_type(chip, SCSI_LUN(srb), SENSE_TYPE_MEDIA_WRITE_ERR);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
-
- for (i = 0; i < len; i++) {
- retval = spi_write_eeprom(chip, addr + i, buf[i]);
- if (retval != STATUS_SUCCESS) {
- vfree(buf);
- set_sense_type(chip, SCSI_LUN(srb), SENSE_TYPE_MEDIA_WRITE_ERR);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
- }
-
- vfree(buf);
-
- return TRANSPORT_GOOD;
-}
-
-static int read_efuse(struct scsi_cmnd *srb, struct rtsx_chip *chip)
-{
- int retval;
- u8 addr, len, i;
- u8 *buf;
-
- rtsx_disable_aspm(chip);
-
- if (chip->ss_en && (rtsx_get_stat(chip) == RTSX_STAT_SS)) {
- rtsx_exit_ss(chip);
- wait_timeout(100);
- }
- rtsx_set_stat(chip, RTSX_STAT_RUN);
-
- addr = srb->cmnd[4];
- len = srb->cmnd[5];
-
- buf = (u8 *)vmalloc(len);
- if (!buf)
- TRACE_RET(chip, TRANSPORT_ERROR);
-
- retval = rtsx_force_power_on(chip, SSC_PDCTL);
- if (retval != STATUS_SUCCESS) {
- vfree(buf);
- set_sense_type(chip, SCSI_LUN(srb), SENSE_TYPE_MEDIA_UNRECOVER_READ_ERR);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
-
- for (i = 0; i < len; i++) {
- retval = rtsx_read_efuse(chip, addr + i, buf + i);
- if (retval != STATUS_SUCCESS) {
- vfree(buf);
- set_sense_type(chip, SCSI_LUN(srb), SENSE_TYPE_MEDIA_UNRECOVER_READ_ERR);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
- }
-
- len = (u8)min(scsi_bufflen(srb), (unsigned int)len);
- rtsx_stor_set_xfer_buf(buf, len, srb);
- scsi_set_resid(srb, scsi_bufflen(srb) - len);
-
- vfree(buf);
-
- return TRANSPORT_GOOD;
-}
-
-static int write_efuse(struct scsi_cmnd *srb, struct rtsx_chip *chip)
-{
- int retval, result = TRANSPORT_GOOD;
- u16 val;
- u8 addr, len, i;
- u8 *buf;
-
- rtsx_disable_aspm(chip);
-
- if (chip->ss_en && (rtsx_get_stat(chip) == RTSX_STAT_SS)) {
- rtsx_exit_ss(chip);
- wait_timeout(100);
- }
- rtsx_set_stat(chip, RTSX_STAT_RUN);
-
- addr = srb->cmnd[4];
- len = srb->cmnd[5];
-
- len = (u8)min(scsi_bufflen(srb), (unsigned int)len);
- buf = (u8 *)vmalloc(len);
- if (buf == NULL)
- TRACE_RET(chip, TRANSPORT_ERROR);
-
- rtsx_stor_get_xfer_buf(buf, len, srb);
- scsi_set_resid(srb, scsi_bufflen(srb) - len);
-
- retval = rtsx_force_power_on(chip, SSC_PDCTL);
- if (retval != STATUS_SUCCESS) {
- vfree(buf);
- TRACE_RET(chip, TRANSPORT_ERROR);
- }
-
- if (chip->asic_code) {
- retval = rtsx_read_phy_register(chip, 0x08, &val);
- if (retval != STATUS_SUCCESS) {
- vfree(buf);
- TRACE_RET(chip, TRANSPORT_ERROR);
- }
-
- retval = rtsx_write_register(chip, PWR_GATE_CTRL, LDO3318_PWR_MASK, LDO_OFF);
- if (retval != STATUS_SUCCESS) {
- vfree(buf);
- TRACE_RET(chip, TRANSPORT_ERROR);
- }
-
- wait_timeout(600);
-
- retval = rtsx_write_phy_register(chip, 0x08, 0x4C00 | chip->phy_voltage);
- if (retval != STATUS_SUCCESS) {
- vfree(buf);
- TRACE_RET(chip, TRANSPORT_ERROR);
- }
-
- retval = rtsx_write_register(chip, PWR_GATE_CTRL, LDO3318_PWR_MASK, LDO_ON);
- if (retval != STATUS_SUCCESS) {
- vfree(buf);
- TRACE_RET(chip, TRANSPORT_ERROR);
- }
-
- wait_timeout(600);
- }
-
- retval = card_power_on(chip, SPI_CARD);
- if (retval != STATUS_SUCCESS) {
- vfree(buf);
- TRACE_RET(chip, TRANSPORT_ERROR);
- }
-
- wait_timeout(50);
-
- for (i = 0; i < len; i++) {
- retval = rtsx_write_efuse(chip, addr + i, buf[i]);
- if (retval != STATUS_SUCCESS) {
- set_sense_type(chip, SCSI_LUN(srb), SENSE_TYPE_MEDIA_WRITE_ERR);
- result = TRANSPORT_FAILED;
- TRACE_GOTO(chip, Exit);
- }
- }
-
-Exit:
- vfree(buf);
-
- retval = card_power_off(chip, SPI_CARD);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, TRANSPORT_ERROR);
-
- if (chip->asic_code) {
- retval = rtsx_write_register(chip, PWR_GATE_CTRL, LDO3318_PWR_MASK, LDO_OFF);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, TRANSPORT_ERROR);
-
- wait_timeout(600);
-
- retval = rtsx_write_phy_register(chip, 0x08, val);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, TRANSPORT_ERROR);
-
- retval = rtsx_write_register(chip, PWR_GATE_CTRL, LDO3318_PWR_MASK, LDO_ON);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, TRANSPORT_ERROR);
- }
-
- return result;
-}
-
-static int read_cfg_byte(struct scsi_cmnd *srb, struct rtsx_chip *chip)
-{
- int retval;
- u8 func, func_max;
- u16 addr, len;
- u8 *buf;
-
- rtsx_disable_aspm(chip);
-
- if (chip->ss_en && (rtsx_get_stat(chip) == RTSX_STAT_SS)) {
- rtsx_exit_ss(chip);
- wait_timeout(100);
- }
- rtsx_set_stat(chip, RTSX_STAT_RUN);
-
- func = srb->cmnd[3];
- addr = ((u16)(srb->cmnd[4]) << 8) | srb->cmnd[5];
- len = ((u16)(srb->cmnd[6]) << 8) | srb->cmnd[7];
-
- RTSX_DEBUGP("%s: func = %d, addr = 0x%x, len = %d\n", __func__, func, addr, len);
-
- if (CHK_SDIO_EXIST(chip) && !CHK_SDIO_IGNORED(chip))
- func_max = 1;
- else
- func_max = 0;
-
- if (func > func_max) {
- set_sense_type(chip, SCSI_LUN(srb), SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
-
- buf = (u8 *)vmalloc(len);
- if (!buf)
- TRACE_RET(chip, TRANSPORT_ERROR);
-
- retval = rtsx_read_cfg_seq(chip, func, addr, buf, len);
- if (retval != STATUS_SUCCESS) {
- set_sense_type(chip, SCSI_LUN(srb), SENSE_TYPE_MEDIA_UNRECOVER_READ_ERR);
- vfree(buf);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
-
- len = (u16)min(scsi_bufflen(srb), (unsigned int)len);
- rtsx_stor_set_xfer_buf(buf, len, srb);
- scsi_set_resid(srb, scsi_bufflen(srb) - len);
-
- vfree(buf);
-
- return TRANSPORT_GOOD;
-}
-
-static int write_cfg_byte(struct scsi_cmnd *srb, struct rtsx_chip *chip)
-{
- int retval;
- u8 func, func_max;
- u16 addr, len;
- u8 *buf;
-
- rtsx_disable_aspm(chip);
-
- if (chip->ss_en && (rtsx_get_stat(chip) == RTSX_STAT_SS)) {
- rtsx_exit_ss(chip);
- wait_timeout(100);
- }
- rtsx_set_stat(chip, RTSX_STAT_RUN);
-
- func = srb->cmnd[3];
- addr = ((u16)(srb->cmnd[4]) << 8) | srb->cmnd[5];
- len = ((u16)(srb->cmnd[6]) << 8) | srb->cmnd[7];
-
- RTSX_DEBUGP("%s: func = %d, addr = 0x%x\n", __func__, func, addr);
-
- if (CHK_SDIO_EXIST(chip) && !CHK_SDIO_IGNORED(chip))
- func_max = 1;
- else
- func_max = 0;
-
- if (func > func_max) {
- set_sense_type(chip, SCSI_LUN(srb), SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
-
- len = (unsigned short)min(scsi_bufflen(srb), (unsigned int)len);
- buf = (u8 *)vmalloc(len);
- if (!buf)
- TRACE_RET(chip, TRANSPORT_ERROR);
-
- rtsx_stor_get_xfer_buf(buf, len, srb);
- scsi_set_resid(srb, scsi_bufflen(srb) - len);
-
- retval = rtsx_write_cfg_seq(chip, func, addr, buf, len);
- if (retval != STATUS_SUCCESS) {
- set_sense_type(chip, SCSI_LUN(srb), SENSE_TYPE_MEDIA_WRITE_ERR);
- vfree(buf);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
-
- vfree(buf);
-
- return TRANSPORT_GOOD;
-}
-
-static int app_cmd(struct scsi_cmnd *srb, struct rtsx_chip *chip)
-{
- int result;
-
- switch (srb->cmnd[2]) {
- case PP_READ10:
- case PP_WRITE10:
- result = read_write(srb, chip);
- break;
-
- case READ_HOST_REG:
- result = read_host_reg(srb, chip);
- break;
-
- case WRITE_HOST_REG:
- result = write_host_reg(srb, chip);
- break;
-
- case GET_VAR:
- result = get_variable(srb, chip);
- break;
-
- case SET_VAR:
- result = set_variable(srb, chip);
- break;
-
- case DMA_READ:
- case DMA_WRITE:
- result = dma_access_ring_buffer(srb, chip);
- break;
-
- case READ_PHY:
- result = read_phy_register(srb, chip);
- break;
-
- case WRITE_PHY:
- result = write_phy_register(srb, chip);
- break;
-
- case ERASE_EEPROM2:
- result = erase_eeprom2(srb, chip);
- break;
-
- case READ_EEPROM2:
- result = read_eeprom2(srb, chip);
- break;
-
- case WRITE_EEPROM2:
- result = write_eeprom2(srb, chip);
- break;
-
- case READ_EFUSE:
- result = read_efuse(srb, chip);
- break;
-
- case WRITE_EFUSE:
- result = write_efuse(srb, chip);
- break;
-
- case READ_CFG:
- result = read_cfg_byte(srb, chip);
- break;
-
- case WRITE_CFG:
- result = write_cfg_byte(srb, chip);
- break;
-
- case SET_CHIP_MODE:
- result = set_chip_mode(srb, chip);
- break;
-
- case SUIT_CMD:
- result = suit_cmd(srb, chip);
- break;
-
- case GET_DEV_STATUS:
- result = get_dev_status(srb, chip);
- break;
-
- default:
- set_sense_type(chip, SCSI_LUN(srb), SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
-
- return result;
-}
-
-
-static int read_status(struct scsi_cmnd *srb, struct rtsx_chip *chip)
-{
- u8 rtsx_status[16];
- int buf_len;
- unsigned int lun = SCSI_LUN(srb);
-
- rtsx_status[0] = (u8)(chip->vendor_id >> 8);
- rtsx_status[1] = (u8)(chip->vendor_id);
-
- rtsx_status[2] = (u8)(chip->product_id >> 8);
- rtsx_status[3] = (u8)(chip->product_id);
-
- rtsx_status[4] = (u8)lun;
-
- if (CHECK_LUN_MODE(chip, SD_MS_2LUN)) {
- if (chip->lun2card[lun] == SD_CARD)
- rtsx_status[5] = 2;
- else
- rtsx_status[5] = 3;
- } else {
- if (chip->card_exist) {
- if (chip->card_exist & XD_CARD)
- rtsx_status[5] = 4;
- else if (chip->card_exist & SD_CARD)
- rtsx_status[5] = 2;
- else if (chip->card_exist & MS_CARD)
- rtsx_status[5] = 3;
- else
- rtsx_status[5] = 7;
- } else {
- rtsx_status[5] = 7;
- }
- }
-
- if (CHECK_LUN_MODE(chip, SD_MS_2LUN))
- rtsx_status[6] = 2;
- else
- rtsx_status[6] = 1;
-
- rtsx_status[7] = (u8)(chip->product_id);
- rtsx_status[8] = chip->ic_version;
-
- if (check_card_exist(chip, lun))
- rtsx_status[9] = 1;
- else
- rtsx_status[9] = 0;
-
- if (CHECK_LUN_MODE(chip, SD_MS_2LUN))
- rtsx_status[10] = 0;
- else
- rtsx_status[10] = 1;
-
- if (CHECK_LUN_MODE(chip, SD_MS_2LUN)) {
- if (chip->lun2card[lun] == SD_CARD)
- rtsx_status[11] = SD_CARD;
- else
- rtsx_status[11] = MS_CARD;
- } else {
- rtsx_status[11] = XD_CARD | SD_CARD | MS_CARD;
- }
-
- if (check_card_ready(chip, lun))
- rtsx_status[12] = 1;
- else
- rtsx_status[12] = 0;
-
- if (get_lun_card(chip, lun) == XD_CARD) {
- rtsx_status[13] = 0x40;
- } else if (get_lun_card(chip, lun) == SD_CARD) {
- struct sd_info *sd_card = &(chip->sd_card);
-
- rtsx_status[13] = 0x20;
- if (CHK_SD(sd_card)) {
- if (CHK_SD_HCXC(sd_card))
- rtsx_status[13] |= 0x04;
- if (CHK_SD_HS(sd_card))
- rtsx_status[13] |= 0x02;
- } else {
- rtsx_status[13] |= 0x08;
- if (CHK_MMC_52M(sd_card))
- rtsx_status[13] |= 0x02;
- if (CHK_MMC_SECTOR_MODE(sd_card))
- rtsx_status[13] |= 0x04;
- }
- } else if (get_lun_card(chip, lun) == MS_CARD) {
- struct ms_info *ms_card = &(chip->ms_card);
-
- if (CHK_MSPRO(ms_card)) {
- rtsx_status[13] = 0x38;
- if (CHK_HG8BIT(ms_card))
- rtsx_status[13] |= 0x04;
-#ifdef SUPPORT_MSXC
- if (CHK_MSXC(ms_card))
- rtsx_status[13] |= 0x01;
-#endif
- } else {
- rtsx_status[13] = 0x30;
- }
- } else {
- if (CHECK_LUN_MODE(chip, DEFAULT_SINGLE)) {
-#ifdef SUPPORT_SDIO
- if (chip->sd_io && chip->sd_int)
- rtsx_status[13] = 0x60;
- else
- rtsx_status[13] = 0x70;
-#else
- rtsx_status[13] = 0x70;
-#endif
- } else {
- if (chip->lun2card[lun] == SD_CARD)
- rtsx_status[13] = 0x20;
- else
- rtsx_status[13] = 0x30;
- }
- }
-
- rtsx_status[14] = 0x78;
- if (CHK_SDIO_EXIST(chip) && !CHK_SDIO_IGNORED(chip))
- rtsx_status[15] = 0x83;
- else
- rtsx_status[15] = 0x82;
-
- buf_len = min(scsi_bufflen(srb), (unsigned int)sizeof(rtsx_status));
- rtsx_stor_set_xfer_buf(rtsx_status, buf_len, srb);
- scsi_set_resid(srb, scsi_bufflen(srb) - buf_len);
-
- return TRANSPORT_GOOD;
-}
-
-static int get_card_bus_width(struct scsi_cmnd *srb, struct rtsx_chip *chip)
-{
- unsigned int lun = SCSI_LUN(srb);
- u8 card, bus_width;
-
- if (!check_card_ready(chip, lun)) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_NOT_PRESENT);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
-
- card = get_lun_card(chip, lun);
- if ((card == SD_CARD) || (card == MS_CARD)) {
- bus_width = chip->card_bus_width[lun];
- } else {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_UNRECOVER_READ_ERR);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
-
- scsi_set_resid(srb, 0);
- rtsx_stor_set_xfer_buf(&bus_width, scsi_bufflen(srb), srb);
-
- return TRANSPORT_GOOD;
-}
-
-static int spi_vendor_cmd(struct scsi_cmnd *srb, struct rtsx_chip *chip)
-{
- int result;
- unsigned int lun = SCSI_LUN(srb);
- u8 gpio_dir;
-
- if (CHECK_PID(chip, 0x5208) || CHECK_PID(chip, 0x5288)) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
-
- rtsx_disable_aspm(chip);
-
- if (chip->ss_en && (rtsx_get_stat(chip) == RTSX_STAT_SS)) {
- rtsx_exit_ss(chip);
- wait_timeout(100);
- }
- rtsx_set_stat(chip, RTSX_STAT_RUN);
-
- rtsx_force_power_on(chip, SSC_PDCTL);
-
- rtsx_read_register(chip, CARD_GPIO_DIR, &gpio_dir);
- rtsx_write_register(chip, CARD_GPIO_DIR, 0x07, gpio_dir & 0x06);
-
- switch (srb->cmnd[2]) {
- case SCSI_SPI_GETSTATUS:
- result = spi_get_status(srb, chip);
- break;
-
- case SCSI_SPI_SETPARAMETER:
- result = spi_set_parameter(srb, chip);
- break;
-
- case SCSI_SPI_READFALSHID:
- result = spi_read_flash_id(srb, chip);
- break;
-
- case SCSI_SPI_READFLASH:
- result = spi_read_flash(srb, chip);
- break;
-
- case SCSI_SPI_WRITEFLASH:
- result = spi_write_flash(srb, chip);
- break;
-
- case SCSI_SPI_WRITEFLASHSTATUS:
- result = spi_write_flash_status(srb, chip);
- break;
-
- case SCSI_SPI_ERASEFLASH:
- result = spi_erase_flash(srb, chip);
- break;
-
- default:
- rtsx_write_register(chip, CARD_GPIO_DIR, 0x07, gpio_dir);
-
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
-
- rtsx_write_register(chip, CARD_GPIO_DIR, 0x07, gpio_dir);
-
- if (result != STATUS_SUCCESS)
- TRACE_RET(chip, TRANSPORT_FAILED);
-
- return TRANSPORT_GOOD;
-}
-
-static int vendor_cmnd(struct scsi_cmnd *srb, struct rtsx_chip *chip)
-{
- int result;
-
- switch (srb->cmnd[1]) {
- case READ_STATUS:
- result = read_status(srb, chip);
- break;
-
- case READ_MEM:
- result = read_mem(srb, chip);
- break;
-
- case WRITE_MEM:
- result = write_mem(srb, chip);
- break;
-
- case READ_EEPROM:
- result = read_eeprom(srb, chip);
- break;
-
- case WRITE_EEPROM:
- result = write_eeprom(srb, chip);
- break;
-
- case TOGGLE_GPIO:
- result = toggle_gpio_cmd(srb, chip);
- break;
-
- case GET_SD_CSD:
- result = get_sd_csd(srb, chip);
- break;
-
- case GET_BUS_WIDTH:
- result = get_card_bus_width(srb, chip);
- break;
-
-#ifdef _MSG_TRACE
- case TRACE_MSG:
- result = trace_msg_cmd(srb, chip);
- break;
-#endif
-
- case SCSI_APP_CMD:
- result = app_cmd(srb, chip);
- break;
-
- case SPI_VENDOR_COMMAND:
- result = spi_vendor_cmd(srb, chip);
- break;
-
- default:
- set_sense_type(chip, SCSI_LUN(srb), SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
-
- return result;
-}
-
-#if !defined(LED_AUTO_BLINK) && !defined(REGULAR_BLINK)
-void led_shine(struct scsi_cmnd *srb, struct rtsx_chip *chip)
-{
- unsigned int lun = SCSI_LUN(srb);
- u16 sec_cnt;
-
- if ((srb->cmnd[0] == READ_10) || (srb->cmnd[0] == WRITE_10))
- sec_cnt = ((u16)(srb->cmnd[7]) << 8) | srb->cmnd[8];
- else if ((srb->cmnd[0] == READ_6) || (srb->cmnd[0] == WRITE_6))
- sec_cnt = srb->cmnd[4];
- else
- return;
-
- if (chip->rw_cap[lun] >= GPIO_TOGGLE_THRESHOLD) {
- toggle_gpio(chip, LED_GPIO);
- chip->rw_cap[lun] = 0;
- } else {
- chip->rw_cap[lun] += sec_cnt;
- }
-}
-#endif
-
-static int ms_format_cmnd(struct scsi_cmnd *srb, struct rtsx_chip *chip)
-{
- struct ms_info *ms_card = &(chip->ms_card);
- unsigned int lun = SCSI_LUN(srb);
- int retval, quick_format;
-
- if (get_lun_card(chip, lun) != MS_CARD) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_LUN_NOT_SUPPORT);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
-
- if ((srb->cmnd[3] != 0x4D) || (srb->cmnd[4] != 0x47) ||
- (srb->cmnd[5] != 0x66) || (srb->cmnd[6] != 0x6D) ||
- (srb->cmnd[7] != 0x74)) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
-
- rtsx_disable_aspm(chip);
-
- if (chip->ss_en && (rtsx_get_stat(chip) == RTSX_STAT_SS)) {
- rtsx_exit_ss(chip);
- wait_timeout(100);
-
- if (!check_card_ready(chip, lun) ||
- (get_card_size(chip, lun) == 0)) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_NOT_PRESENT);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
- }
- rtsx_set_stat(chip, RTSX_STAT_RUN);
-
- if (srb->cmnd[8] & 0x01)
- quick_format = 0;
- else
- quick_format = 1;
-
- if (!(chip->card_ready & MS_CARD)) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_NOT_PRESENT);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
-
- if (chip->card_wp & MS_CARD) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_WRITE_PROTECT);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
-
- if (!CHK_MSPRO(ms_card)) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_LUN_NOT_SUPPORT);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
-
- retval = mspro_format(srb, chip, MS_SHORT_DATA_LEN, quick_format);
- if (retval != STATUS_SUCCESS) {
- set_sense_type(chip, lun, SENSE_TYPE_FORMAT_CMD_FAILED);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
-
- scsi_set_resid(srb, 0);
- return TRANSPORT_GOOD;
-}
-
-#ifdef SUPPORT_PCGL_1P18
-static int get_ms_information(struct scsi_cmnd *srb, struct rtsx_chip *chip)
-{
- struct ms_info *ms_card = &(chip->ms_card);
- unsigned int lun = SCSI_LUN(srb);
- u8 dev_info_id, data_len;
- u8 *buf;
- unsigned int buf_len;
- int i;
-
- if (!check_card_ready(chip, lun)) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_NOT_PRESENT);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
- if ((get_lun_card(chip, lun) != MS_CARD)) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_LUN_NOT_SUPPORT);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
-
- if ((srb->cmnd[2] != 0xB0) || (srb->cmnd[4] != 0x4D) ||
- (srb->cmnd[5] != 0x53) || (srb->cmnd[6] != 0x49) ||
- (srb->cmnd[7] != 0x44)) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
-
- dev_info_id = srb->cmnd[3];
- if ((CHK_MSXC(ms_card) && (dev_info_id == 0x10)) ||
- (!CHK_MSXC(ms_card) && (dev_info_id == 0x13)) ||
- !CHK_MSPRO(ms_card)) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
-
- if (dev_info_id == 0x15)
- buf_len = data_len = 0x3A;
- else
- buf_len = data_len = 0x6A;
-
- buf = kmalloc(buf_len, GFP_KERNEL);
- if (!buf)
- TRACE_RET(chip, TRANSPORT_ERROR);
-
- i = 0;
- /* GET Memory Stick Media Information Response Header */
- buf[i++] = 0x00; /* Data length MSB */
- buf[i++] = data_len; /* Data length LSB */
- /* Device Information Type Code */
- if (CHK_MSXC(ms_card))
- buf[i++] = 0x03;
- else
- buf[i++] = 0x02;
-
- /* SGM bit */
- buf[i++] = 0x01;
- /* Reserved */
- buf[i++] = 0x00;
- buf[i++] = 0x00;
- buf[i++] = 0x00;
- /* Number of Device Information */
- buf[i++] = 0x01;
-
- /* Device Information Body */
-
- /* Device Information ID Number */
- buf[i++] = dev_info_id;
- /* Device Information Length */
- if (dev_info_id == 0x15)
- data_len = 0x31;
- else
- data_len = 0x61;
-
- buf[i++] = 0x00; /* Data length MSB */
- buf[i++] = data_len; /* Data length LSB */
- /* Valid Bit */
- buf[i++] = 0x80;
- if ((dev_info_id == 0x10) || (dev_info_id == 0x13)) {
- /* System Information */
- memcpy(buf+i, ms_card->raw_sys_info, 96);
- } else {
- /* Model Name */
- memcpy(buf+i, ms_card->raw_model_name, 48);
- }
-
- rtsx_stor_set_xfer_buf(buf, buf_len, srb);
-
- if (dev_info_id == 0x15)
- scsi_set_resid(srb, scsi_bufflen(srb)-0x3C);
- else
- scsi_set_resid(srb, scsi_bufflen(srb)-0x6C);
-
- kfree(buf);
- return STATUS_SUCCESS;
-}
-#endif
-
-static int ms_sp_cmnd(struct scsi_cmnd *srb, struct rtsx_chip *chip)
-{
- int retval = TRANSPORT_ERROR;
-
- if (srb->cmnd[2] == MS_FORMAT)
- retval = ms_format_cmnd(srb, chip);
-#ifdef SUPPORT_PCGL_1P18
- else if (srb->cmnd[2] == GET_MS_INFORMATION)
- retval = get_ms_information(srb, chip);
-#endif
-
- return retval;
-}
-
-#ifdef SUPPORT_CPRM
-static int sd_extention_cmnd(struct scsi_cmnd *srb, struct rtsx_chip *chip)
-{
- unsigned int lun = SCSI_LUN(srb);
- int result;
-
- rtsx_disable_aspm(chip);
-
- if (chip->ss_en && (rtsx_get_stat(chip) == RTSX_STAT_SS)) {
- rtsx_exit_ss(chip);
- wait_timeout(100);
- }
- rtsx_set_stat(chip, RTSX_STAT_RUN);
-
- sd_cleanup_work(chip);
-
- if (!check_card_ready(chip, lun)) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_NOT_PRESENT);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
- if ((get_lun_card(chip, lun) != SD_CARD)) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_LUN_NOT_SUPPORT);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
-
- switch (srb->cmnd[0]) {
- case SD_PASS_THRU_MODE:
- result = sd_pass_thru_mode(srb, chip);
- break;
-
- case SD_EXECUTE_NO_DATA:
- result = sd_execute_no_data(srb, chip);
- break;
-
- case SD_EXECUTE_READ:
- result = sd_execute_read_data(srb, chip);
- break;
-
- case SD_EXECUTE_WRITE:
- result = sd_execute_write_data(srb, chip);
- break;
-
- case SD_GET_RSP:
- result = sd_get_cmd_rsp(srb, chip);
- break;
-
- case SD_HW_RST:
- result = sd_hw_rst(srb, chip);
- break;
-
- default:
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
-
- return result;
-}
-#endif
-
-#ifdef SUPPORT_MAGIC_GATE
-static int mg_report_key(struct scsi_cmnd *srb, struct rtsx_chip *chip)
-{
- struct ms_info *ms_card = &(chip->ms_card);
- unsigned int lun = SCSI_LUN(srb);
- int retval;
- u8 key_format;
-
- RTSX_DEBUGP("--%s--\n", __func__);
-
- rtsx_disable_aspm(chip);
-
- if (chip->ss_en && (rtsx_get_stat(chip) == RTSX_STAT_SS)) {
- rtsx_exit_ss(chip);
- wait_timeout(100);
- }
- rtsx_set_stat(chip, RTSX_STAT_RUN);
-
- ms_cleanup_work(chip);
-
- if (!check_card_ready(chip, lun)) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_NOT_PRESENT);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
- if ((get_lun_card(chip, lun) != MS_CARD)) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_LUN_NOT_SUPPORT);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
-
- if (srb->cmnd[7] != KC_MG_R_PRO) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
-
- if (!CHK_MSPRO(ms_card)) {
- set_sense_type(chip, lun, SENSE_TYPE_MG_INCOMPATIBLE_MEDIUM);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
-
- key_format = srb->cmnd[10] & 0x3F;
- RTSX_DEBUGP("key_format = 0x%x\n", key_format);
-
- switch (key_format) {
- case KF_GET_LOC_EKB:
- if ((scsi_bufflen(srb) == 0x41C) &&
- (srb->cmnd[8] == 0x04) &&
- (srb->cmnd[9] == 0x1C)) {
- retval = mg_get_local_EKB(srb, chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, TRANSPORT_FAILED);
-
- } else {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
- break;
-
- case KF_RSP_CHG:
- if ((scsi_bufflen(srb) == 0x24) &&
- (srb->cmnd[8] == 0x00) &&
- (srb->cmnd[9] == 0x24)) {
- retval = mg_get_rsp_chg(srb, chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, TRANSPORT_FAILED);
-
- } else {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
- break;
-
- case KF_GET_ICV:
- ms_card->mg_entry_num = srb->cmnd[5];
- if ((scsi_bufflen(srb) == 0x404) &&
- (srb->cmnd[8] == 0x04) &&
- (srb->cmnd[9] == 0x04) &&
- (srb->cmnd[2] == 0x00) &&
- (srb->cmnd[3] == 0x00) &&
- (srb->cmnd[4] == 0x00) &&
- (srb->cmnd[5] < 32)) {
- retval = mg_get_ICV(srb, chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, TRANSPORT_FAILED);
-
- } else {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
- break;
-
- default:
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
-
- scsi_set_resid(srb, 0);
- return TRANSPORT_GOOD;
-}
-
-static int mg_send_key(struct scsi_cmnd *srb, struct rtsx_chip *chip)
-{
- struct ms_info *ms_card = &(chip->ms_card);
- unsigned int lun = SCSI_LUN(srb);
- int retval;
- u8 key_format;
-
- RTSX_DEBUGP("--%s--\n", __func__);
-
- rtsx_disable_aspm(chip);
-
- if (chip->ss_en && (rtsx_get_stat(chip) == RTSX_STAT_SS)) {
- rtsx_exit_ss(chip);
- wait_timeout(100);
- }
- rtsx_set_stat(chip, RTSX_STAT_RUN);
-
- ms_cleanup_work(chip);
-
- if (!check_card_ready(chip, lun)) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_NOT_PRESENT);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
- if (check_card_wp(chip, lun)) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_WRITE_PROTECT);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
- if ((get_lun_card(chip, lun) != MS_CARD)) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_LUN_NOT_SUPPORT);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
-
- if (srb->cmnd[7] != KC_MG_R_PRO) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
-
- if (!CHK_MSPRO(ms_card)) {
- set_sense_type(chip, lun, SENSE_TYPE_MG_INCOMPATIBLE_MEDIUM);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
-
- key_format = srb->cmnd[10] & 0x3F;
- RTSX_DEBUGP("key_format = 0x%x\n", key_format);
-
- switch (key_format) {
- case KF_SET_LEAF_ID:
- if ((scsi_bufflen(srb) == 0x0C) &&
- (srb->cmnd[8] == 0x00) &&
- (srb->cmnd[9] == 0x0C)) {
- retval = mg_set_leaf_id(srb, chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, TRANSPORT_FAILED);
-
- } else {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
- break;
-
- case KF_CHG_HOST:
- if ((scsi_bufflen(srb) == 0x0C) &&
- (srb->cmnd[8] == 0x00) &&
- (srb->cmnd[9] == 0x0C)) {
- retval = mg_chg(srb, chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, TRANSPORT_FAILED);
-
- } else {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
- break;
-
- case KF_RSP_HOST:
- if ((scsi_bufflen(srb) == 0x0C) &&
- (srb->cmnd[8] == 0x00) &&
- (srb->cmnd[9] == 0x0C)) {
- retval = mg_rsp(srb, chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, TRANSPORT_FAILED);
-
- } else {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
- break;
-
- case KF_SET_ICV:
- ms_card->mg_entry_num = srb->cmnd[5];
- if ((scsi_bufflen(srb) == 0x404) &&
- (srb->cmnd[8] == 0x04) &&
- (srb->cmnd[9] == 0x04) &&
- (srb->cmnd[2] == 0x00) &&
- (srb->cmnd[3] == 0x00) &&
- (srb->cmnd[4] == 0x00) &&
- (srb->cmnd[5] < 32)) {
- retval = mg_set_ICV(srb, chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, TRANSPORT_FAILED);
-
- } else {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
- break;
-
- default:
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
-
- scsi_set_resid(srb, 0);
- return TRANSPORT_GOOD;
-}
-#endif
-
-int rtsx_scsi_handler(struct scsi_cmnd *srb, struct rtsx_chip *chip)
-{
-#ifdef SUPPORT_SD_LOCK
- struct sd_info *sd_card = &(chip->sd_card);
-#endif
- struct ms_info *ms_card = &(chip->ms_card);
- unsigned int lun = SCSI_LUN(srb);
- int result;
-
-#ifdef SUPPORT_SD_LOCK
- if (sd_card->sd_erase_status) {
- /* Block all SCSI command except for
- * REQUEST_SENSE and rs_ppstatus
- */
- if (!((srb->cmnd[0] == VENDOR_CMND) &&
- (srb->cmnd[1] == SCSI_APP_CMD) &&
- (srb->cmnd[2] == GET_DEV_STATUS)) &&
- (srb->cmnd[0] != REQUEST_SENSE)) {
- /* Logical Unit Not Ready Format in Progress */
- set_sense_data(chip, lun, CUR_ERR,
- 0x02, 0, 0x04, 0x04, 0, 0);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
- }
-#endif
-
- if ((get_lun_card(chip, lun) == MS_CARD) &&
- (ms_card->format_status == FORMAT_IN_PROGRESS)) {
- if ((srb->cmnd[0] != REQUEST_SENSE) && (srb->cmnd[0] != INQUIRY)) {
- /* Logical Unit Not Ready Format in Progress */
- set_sense_data(chip, lun, CUR_ERR, 0x02, 0, 0x04, 0x04,
- 0, (u16)(ms_card->progress));
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
- }
-
- switch (srb->cmnd[0]) {
- case READ_10:
- case WRITE_10:
- case READ_6:
- case WRITE_6:
- result = read_write(srb, chip);
-#if !defined(LED_AUTO_BLINK) && !defined(REGULAR_BLINK)
- led_shine(srb, chip);
-#endif
- break;
-
- case TEST_UNIT_READY:
- result = test_unit_ready(srb, chip);
- break;
-
- case INQUIRY:
- result = inquiry(srb, chip);
- break;
-
- case READ_CAPACITY:
- result = read_capacity(srb, chip);
- break;
-
- case START_STOP:
- result = start_stop_unit(srb, chip);
- break;
-
- case ALLOW_MEDIUM_REMOVAL:
- result = allow_medium_removal(srb, chip);
- break;
-
- case REQUEST_SENSE:
- result = request_sense(srb, chip);
- break;
-
- case MODE_SENSE:
- case MODE_SENSE_10:
- result = mode_sense(srb, chip);
- break;
-
- case 0x23:
- result = read_format_capacity(srb, chip);
- break;
-
- case VENDOR_CMND:
- result = vendor_cmnd(srb, chip);
- break;
-
- case MS_SP_CMND:
- result = ms_sp_cmnd(srb, chip);
- break;
-
-#ifdef SUPPORT_CPRM
- case SD_PASS_THRU_MODE:
- case SD_EXECUTE_NO_DATA:
- case SD_EXECUTE_READ:
- case SD_EXECUTE_WRITE:
- case SD_GET_RSP:
- case SD_HW_RST:
- result = sd_extention_cmnd(srb, chip);
- break;
-#endif
-
-#ifdef SUPPORT_MAGIC_GATE
- case CMD_MSPRO_MG_RKEY:
- result = mg_report_key(srb, chip);
- break;
-
- case CMD_MSPRO_MG_SKEY:
- result = mg_send_key(srb, chip);
- break;
-#endif
-
- case FORMAT_UNIT:
- case MODE_SELECT:
- case VERIFY:
- result = TRANSPORT_GOOD;
- break;
-
- default:
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
- result = TRANSPORT_FAILED;
- }
-
- return result;
-}
diff --git a/drivers/staging/rts_pstor/rtsx_scsi.h b/drivers/staging/rts_pstor/rtsx_scsi.h
deleted file mode 100644
index 64b8499..0000000
--- a/drivers/staging/rts_pstor/rtsx_scsi.h
+++ /dev/null
@@ -1,142 +0,0 @@
-/* Driver for Realtek PCI-Express card reader
- * Header file
- *
- * Copyright(c) 2009 Realtek Semiconductor Corp. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, see <http://www.gnu.org/licenses/>.
- *
- * Author:
- * wwang (wei_wang@realsil.com.cn)
- * No. 450, Shenhu Road, Suzhou Industry Park, Suzhou, China
- */
-
-#ifndef __REALTEK_RTSX_SCSI_H
-#define __REALTEK_RTSX_SCSI_H
-
-#include "rtsx.h"
-#include "rtsx_chip.h"
-
-#define MS_SP_CMND 0xFA
-#define MS_FORMAT 0xA0
-#define GET_MS_INFORMATION 0xB0
-
-#define VENDOR_CMND 0xF0
-
-#define READ_STATUS 0x09
-
-#define READ_EEPROM 0x04
-#define WRITE_EEPROM 0x05
-#define READ_MEM 0x0D
-#define WRITE_MEM 0x0E
-#define GET_BUS_WIDTH 0x13
-#define GET_SD_CSD 0x14
-#define TOGGLE_GPIO 0x15
-#define TRACE_MSG 0x18
-
-#define SCSI_APP_CMD 0x10
-
-#define PP_READ10 0x1A
-#define PP_WRITE10 0x0A
-#define READ_HOST_REG 0x1D
-#define WRITE_HOST_REG 0x0D
-#define SET_VAR 0x05
-#define GET_VAR 0x15
-#define DMA_READ 0x16
-#define DMA_WRITE 0x06
-#define GET_DEV_STATUS 0x10
-#define SET_CHIP_MODE 0x27
-#define SUIT_CMD 0xE0
-#define WRITE_PHY 0x07
-#define READ_PHY 0x17
-#define WRITE_EEPROM2 0x03
-#define READ_EEPROM2 0x13
-#define ERASE_EEPROM2 0x23
-#define WRITE_EFUSE 0x04
-#define READ_EFUSE 0x14
-#define WRITE_CFG 0x0E
-#define READ_CFG 0x1E
-
-#define SPI_VENDOR_COMMAND 0x1C
-
-#define SCSI_SPI_GETSTATUS 0x00
-#define SCSI_SPI_SETPARAMETER 0x01
-#define SCSI_SPI_READFALSHID 0x02
-#define SCSI_SPI_READFLASH 0x03
-#define SCSI_SPI_WRITEFLASH 0x04
-#define SCSI_SPI_WRITEFLASHSTATUS 0x05
-#define SCSI_SPI_ERASEFLASH 0x06
-
-#define INIT_BATCHCMD 0x41
-#define ADD_BATCHCMD 0x42
-#define SEND_BATCHCMD 0x43
-#define GET_BATCHRSP 0x44
-
-#define CHIP_NORMALMODE 0x00
-#define CHIP_DEBUGMODE 0x01
-
-/* SD Pass Through Command Extension */
-#define SD_PASS_THRU_MODE 0xD0
-#define SD_EXECUTE_NO_DATA 0xD1
-#define SD_EXECUTE_READ 0xD2
-#define SD_EXECUTE_WRITE 0xD3
-#define SD_GET_RSP 0xD4
-#define SD_HW_RST 0xD6
-
-#ifdef SUPPORT_MAGIC_GATE
-#define CMD_MSPRO_MG_RKEY 0xA4 /* Report Key Command */
-#define CMD_MSPRO_MG_SKEY 0xA3 /* Send Key Command */
-
-/* CBWCB field: key class */
-#define KC_MG_R_PRO 0xBE /* MG-R PRO*/
-
-/* CBWCB field: key format */
-#define KF_SET_LEAF_ID 0x31 /* Set Leaf ID */
-#define KF_GET_LOC_EKB 0x32 /* Get Local EKB */
-#define KF_CHG_HOST 0x33 /* Challenge (host) */
-#define KF_RSP_CHG 0x34 /* Response and Challenge (device) */
-#define KF_RSP_HOST 0x35 /* Response (host) */
-#define KF_GET_ICV 0x36 /* Get ICV */
-#define KF_SET_ICV 0x37 /* SSet ICV */
-#endif
-
-/* Sense type */
-#define SENSE_TYPE_NO_SENSE 0
-#define SENSE_TYPE_MEDIA_CHANGE 1
-#define SENSE_TYPE_MEDIA_NOT_PRESENT 2
-#define SENSE_TYPE_MEDIA_LBA_OVER_RANGE 3
-#define SENSE_TYPE_MEDIA_LUN_NOT_SUPPORT 4
-#define SENSE_TYPE_MEDIA_WRITE_PROTECT 5
-#define SENSE_TYPE_MEDIA_INVALID_CMD_FIELD 6
-#define SENSE_TYPE_MEDIA_UNRECOVER_READ_ERR 7
-#define SENSE_TYPE_MEDIA_WRITE_ERR 8
-#define SENSE_TYPE_FORMAT_IN_PROGRESS 9
-#define SENSE_TYPE_FORMAT_CMD_FAILED 10
-#ifdef SUPPORT_MAGIC_GATE
-#define SENSE_TYPE_MG_KEY_FAIL_NOT_ESTAB 0x0b
-#define SENSE_TYPE_MG_KEY_FAIL_NOT_AUTHEN 0x0c
-#define SENSE_TYPE_MG_INCOMPATIBLE_MEDIUM 0x0d
-#define SENSE_TYPE_MG_WRITE_ERR 0x0e
-#endif
-#ifdef SUPPORT_SD_LOCK
-#define SENSE_TYPE_MEDIA_READ_FORBIDDEN 0x10 /* FOR Locked SD card*/
-#endif
-
-void scsi_show_command(struct scsi_cmnd *srb);
-void set_sense_type(struct rtsx_chip *chip, unsigned int lun, int sense_type);
-void set_sense_data(struct rtsx_chip *chip, unsigned int lun, u8 err_code, u8 sense_key,
- u32 info, u8 asc, u8 ascq, u8 sns_key_info0, u16 sns_key_info1);
-int rtsx_scsi_handler(struct scsi_cmnd *srb, struct rtsx_chip *chip);
-
-#endif /* __REALTEK_RTSX_SCSI_H */
-
diff --git a/drivers/staging/rts_pstor/rtsx_sys.h b/drivers/staging/rts_pstor/rtsx_sys.h
deleted file mode 100644
index 8e55a3a..0000000
--- a/drivers/staging/rts_pstor/rtsx_sys.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/* Driver for Realtek PCI-Express card reader
- * Header file
- *
- * Copyright(c) 2009 Realtek Semiconductor Corp. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, see <http://www.gnu.org/licenses/>.
- *
- * Author:
- * wwang (wei_wang@realsil.com.cn)
- * No. 450, Shenhu Road, Suzhou Industry Park, Suzhou, China
- */
-
-#ifndef __RTSX_SYS_H
-#define __RTSX_SYS_H
-
-#include "rtsx.h"
-#include "rtsx_chip.h"
-#include "rtsx_card.h"
-
-typedef dma_addr_t ULONG_PTR;
-
-static inline void rtsx_exclusive_enter_ss(struct rtsx_chip *chip)
-{
- struct rtsx_dev *dev = chip->rtsx;
-
- spin_lock(&(dev->reg_lock));
- rtsx_enter_ss(chip);
- spin_unlock(&(dev->reg_lock));
-}
-
-static inline void rtsx_reset_detected_cards(struct rtsx_chip *chip, int flag)
-{
- rtsx_reset_cards(chip);
-}
-
-#define RTSX_MSG_IN_INT(x)
-
-#endif /* __RTSX_SYS_H */
-
diff --git a/drivers/staging/rts_pstor/rtsx_transport.c b/drivers/staging/rts_pstor/rtsx_transport.c
deleted file mode 100644
index 1f9a424..0000000
--- a/drivers/staging/rts_pstor/rtsx_transport.c
+++ /dev/null
@@ -1,769 +0,0 @@
-/* Driver for Realtek PCI-Express card reader
- *
- * Copyright(c) 2009 Realtek Semiconductor Corp. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, see <http://www.gnu.org/licenses/>.
- *
- * Author:
- * wwang (wei_wang@realsil.com.cn)
- * No. 450, Shenhu Road, Suzhou Industry Park, Suzhou, China
- */
-
-#include <linux/blkdev.h>
-#include <linux/kthread.h>
-#include <linux/sched.h>
-
-#include "rtsx.h"
-#include "rtsx_scsi.h"
-#include "rtsx_transport.h"
-#include "rtsx_chip.h"
-#include "rtsx_card.h"
-#include "debug.h"
-
-/***********************************************************************
- * Scatter-gather transfer buffer access routines
- ***********************************************************************/
-
-/* Copy a buffer of length buflen to/from the srb's transfer buffer.
- * (Note: for scatter-gather transfers (srb->use_sg > 0), srb->request_buffer
- * points to a list of s-g entries and we ignore srb->request_bufflen.
- * For non-scatter-gather transfers, srb->request_buffer points to the
- * transfer buffer itself and srb->request_bufflen is the buffer's length.)
- * Update the *index and *offset variables so that the next copy will
- * pick up from where this one left off. */
-
-unsigned int rtsx_stor_access_xfer_buf(unsigned char *buffer,
- unsigned int buflen, struct scsi_cmnd *srb, unsigned int *index,
- unsigned int *offset, enum xfer_buf_dir dir)
-{
- unsigned int cnt;
-
- /* If not using scatter-gather, just transfer the data directly.
- * Make certain it will fit in the available buffer space. */
- if (scsi_sg_count(srb) == 0) {
- if (*offset >= scsi_bufflen(srb))
- return 0;
- cnt = min(buflen, scsi_bufflen(srb) - *offset);
- if (dir == TO_XFER_BUF)
- memcpy((unsigned char *) scsi_sglist(srb) + *offset,
- buffer, cnt);
- else
- memcpy(buffer, (unsigned char *) scsi_sglist(srb) +
- *offset, cnt);
- *offset += cnt;
-
- /* Using scatter-gather. We have to go through the list one entry
- * at a time. Each s-g entry contains some number of pages, and
- * each page has to be kmap()'ed separately. If the page is already
- * in kernel-addressable memory then kmap() will return its address.
- * If the page is not directly accessible -- such as a user buffer
- * located in high memory -- then kmap() will map it to a temporary
- * position in the kernel's virtual address space. */
- } else {
- struct scatterlist *sg =
- (struct scatterlist *) scsi_sglist(srb)
- + *index;
-
- /* This loop handles a single s-g list entry, which may
- * include multiple pages. Find the initial page structure
- * and the starting offset within the page, and update
- * the *offset and *index values for the next loop. */
- cnt = 0;
- while (cnt < buflen && *index < scsi_sg_count(srb)) {
- struct page *page = sg_page(sg) +
- ((sg->offset + *offset) >> PAGE_SHIFT);
- unsigned int poff =
- (sg->offset + *offset) & (PAGE_SIZE-1);
- unsigned int sglen = sg->length - *offset;
-
- if (sglen > buflen - cnt) {
-
- /* Transfer ends within this s-g entry */
- sglen = buflen - cnt;
- *offset += sglen;
- } else {
-
- /* Transfer continues to next s-g entry */
- *offset = 0;
- ++*index;
- ++sg;
- }
-
- /* Transfer the data for all the pages in this
- * s-g entry. For each page: call kmap(), do the
- * transfer, and call kunmap() immediately after. */
- while (sglen > 0) {
- unsigned int plen = min(sglen, (unsigned int)
- PAGE_SIZE - poff);
- unsigned char *ptr = kmap(page);
-
- if (dir == TO_XFER_BUF)
- memcpy(ptr + poff, buffer + cnt, plen);
- else
- memcpy(buffer + cnt, ptr + poff, plen);
- kunmap(page);
-
- /* Start at the beginning of the next page */
- poff = 0;
- ++page;
- cnt += plen;
- sglen -= plen;
- }
- }
- }
-
- /* Return the amount actually transferred */
- return cnt;
-}
-
-/* Store the contents of buffer into srb's transfer buffer and set the
-* SCSI residue. */
-void rtsx_stor_set_xfer_buf(unsigned char *buffer,
- unsigned int buflen, struct scsi_cmnd *srb)
-{
- unsigned int index = 0, offset = 0;
-
- rtsx_stor_access_xfer_buf(buffer, buflen, srb, &index, &offset,
- TO_XFER_BUF);
- if (buflen < scsi_bufflen(srb))
- scsi_set_resid(srb, scsi_bufflen(srb) - buflen);
-}
-
-void rtsx_stor_get_xfer_buf(unsigned char *buffer,
- unsigned int buflen, struct scsi_cmnd *srb)
-{
- unsigned int index = 0, offset = 0;
-
- rtsx_stor_access_xfer_buf(buffer, buflen, srb, &index, &offset,
- FROM_XFER_BUF);
- if (buflen < scsi_bufflen(srb))
- scsi_set_resid(srb, scsi_bufflen(srb) - buflen);
-}
-
-
-/***********************************************************************
- * Transport routines
- ***********************************************************************/
-
-/* Invoke the transport and basic error-handling/recovery methods
- *
- * This is used to send the message to the device and receive the response.
- */
-void rtsx_invoke_transport(struct scsi_cmnd *srb, struct rtsx_chip *chip)
-{
- int result;
-
- result = rtsx_scsi_handler(srb, chip);
-
- /* if the command gets aborted by the higher layers, we need to
- * short-circuit all other processing
- */
- if (rtsx_chk_stat(chip, RTSX_STAT_ABORT)) {
- RTSX_DEBUGP("-- command was aborted\n");
- srb->result = DID_ABORT << 16;
- goto Handle_Errors;
- }
-
- /* if there is a transport error, reset and don't auto-sense */
- if (result == TRANSPORT_ERROR) {
- RTSX_DEBUGP("-- transport indicates error, resetting\n");
- srb->result = DID_ERROR << 16;
- goto Handle_Errors;
- }
-
- srb->result = SAM_STAT_GOOD;
-
- /*
- * If we have a failure, we're going to do a REQUEST_SENSE
- * automatically. Note that we differentiate between a command
- * "failure" and an "error" in the transport mechanism.
- */
- if (result == TRANSPORT_FAILED) {
- /* set the result so the higher layers expect this data */
- srb->result = SAM_STAT_CHECK_CONDITION;
- memcpy(srb->sense_buffer,
- (unsigned char *)&(chip->sense_buffer[SCSI_LUN(srb)]),
- sizeof(struct sense_data_t));
- }
-
- return;
-
- /* Error and abort processing: try to resynchronize with the device
- * by issuing a port reset. If that fails, try a class-specific
- * device reset. */
-Handle_Errors:
- return;
-}
-
-void rtsx_add_cmd(struct rtsx_chip *chip,
- u8 cmd_type, u16 reg_addr, u8 mask, u8 data)
-{
- u32 *cb = (u32 *)(chip->host_cmds_ptr);
- u32 val = 0;
-
- val |= (u32)(cmd_type & 0x03) << 30;
- val |= (u32)(reg_addr & 0x3FFF) << 16;
- val |= (u32)mask << 8;
- val |= (u32)data;
-
- spin_lock_irq(&chip->rtsx->reg_lock);
- if (chip->ci < (HOST_CMDS_BUF_LEN / 4))
- cb[(chip->ci)++] = cpu_to_le32(val);
-
- spin_unlock_irq(&chip->rtsx->reg_lock);
-}
-
-void rtsx_send_cmd_no_wait(struct rtsx_chip *chip)
-{
- u32 val = 1 << 31;
-
- rtsx_writel(chip, RTSX_HCBAR, chip->host_cmds_addr);
-
- val |= (u32)(chip->ci * 4) & 0x00FFFFFF;
- /* Hardware Auto Response */
- val |= 0x40000000;
- rtsx_writel(chip, RTSX_HCBCTLR, val);
-}
-
-int rtsx_send_cmd(struct rtsx_chip *chip, u8 card, int timeout)
-{
- struct rtsx_dev *rtsx = chip->rtsx;
- struct completion trans_done;
- u32 val = 1 << 31;
- long timeleft;
- int err = 0;
-
- if (card == SD_CARD)
- rtsx->check_card_cd = SD_EXIST;
- else if (card == MS_CARD)
- rtsx->check_card_cd = MS_EXIST;
- else if (card == XD_CARD)
- rtsx->check_card_cd = XD_EXIST;
- else
- rtsx->check_card_cd = 0;
-
- spin_lock_irq(&rtsx->reg_lock);
-
- /* set up data structures for the wakeup system */
- rtsx->done = &trans_done;
- rtsx->trans_result = TRANS_NOT_READY;
- init_completion(&trans_done);
- rtsx->trans_state = STATE_TRANS_CMD;
-
- rtsx_writel(chip, RTSX_HCBAR, chip->host_cmds_addr);
-
- val |= (u32)(chip->ci * 4) & 0x00FFFFFF;
- /* Hardware Auto Response */
- val |= 0x40000000;
- rtsx_writel(chip, RTSX_HCBCTLR, val);
-
- spin_unlock_irq(&rtsx->reg_lock);
-
- /* Wait for TRANS_OK_INT */
- timeleft = wait_for_completion_interruptible_timeout(
- &trans_done, timeout * HZ / 1000);
- if (timeleft <= 0) {
- RTSX_DEBUGP("chip->int_reg = 0x%x\n", chip->int_reg);
- err = -ETIMEDOUT;
- TRACE_GOTO(chip, finish_send_cmd);
- }
-
- spin_lock_irq(&rtsx->reg_lock);
- if (rtsx->trans_result == TRANS_RESULT_FAIL)
- err = -EIO;
- else if (rtsx->trans_result == TRANS_RESULT_OK)
- err = 0;
-
- spin_unlock_irq(&rtsx->reg_lock);
-
-finish_send_cmd:
- rtsx->done = NULL;
- rtsx->trans_state = STATE_TRANS_NONE;
-
- if (err < 0)
- rtsx_stop_cmd(chip, card);
-
- return err;
-}
-
-static inline void rtsx_add_sg_tbl(
- struct rtsx_chip *chip, u32 addr, u32 len, u8 option)
-{
- u64 *sgb = (u64 *)(chip->host_sg_tbl_ptr);
- u64 val = 0;
- u32 temp_len = 0;
- u8 temp_opt = 0;
-
- do {
- if (len > 0x80000) {
- temp_len = 0x80000;
- temp_opt = option & (~SG_END);
- } else {
- temp_len = len;
- temp_opt = option;
- }
- val = ((u64)addr << 32) | ((u64)temp_len << 12) | temp_opt;
-
- if (chip->sgi < (HOST_SG_TBL_BUF_LEN / 8))
- sgb[(chip->sgi)++] = cpu_to_le64(val);
-
- len -= temp_len;
- addr += temp_len;
- } while (len);
-}
-
-static int rtsx_transfer_sglist_adma_partial(struct rtsx_chip *chip, u8 card,
- struct scatterlist *sg, int num_sg, unsigned int *index,
- unsigned int *offset, int size,
- enum dma_data_direction dma_dir, int timeout)
-{
- struct rtsx_dev *rtsx = chip->rtsx;
- struct completion trans_done;
- u8 dir;
- int sg_cnt, i, resid;
- int err = 0;
- long timeleft;
- struct scatterlist *sg_ptr;
- u32 val = TRIG_DMA;
-
- if ((sg == NULL) || (num_sg <= 0) || !offset || !index)
- return -EIO;
-
- if (dma_dir == DMA_TO_DEVICE)
- dir = HOST_TO_DEVICE;
- else if (dma_dir == DMA_FROM_DEVICE)
- dir = DEVICE_TO_HOST;
- else
- return -ENXIO;
-
- if (card == SD_CARD)
- rtsx->check_card_cd = SD_EXIST;
- else if (card == MS_CARD)
- rtsx->check_card_cd = MS_EXIST;
- else if (card == XD_CARD)
- rtsx->check_card_cd = XD_EXIST;
- else
- rtsx->check_card_cd = 0;
-
- spin_lock_irq(&rtsx->reg_lock);
-
- /* set up data structures for the wakeup system */
- rtsx->done = &trans_done;
-
- rtsx->trans_state = STATE_TRANS_SG;
- rtsx->trans_result = TRANS_NOT_READY;
-
- spin_unlock_irq(&rtsx->reg_lock);
-
- sg_cnt = dma_map_sg(&(rtsx->pci->dev), sg, num_sg, dma_dir);
-
- resid = size;
- sg_ptr = sg;
- chip->sgi = 0;
- /* Usually the next entry will be @sg@ + 1, but if this sg element
- * is part of a chained scatterlist, it could jump to the start of
- * a new scatterlist array. So here we use sg_next to move to
- * the proper sg
- */
- for (i = 0; i < *index; i++)
- sg_ptr = sg_next(sg_ptr);
- for (i = *index; i < sg_cnt; i++) {
- dma_addr_t addr;
- unsigned int len;
- u8 option;
-
- addr = sg_dma_address(sg_ptr);
- len = sg_dma_len(sg_ptr);
-
- RTSX_DEBUGP("DMA addr: 0x%x, Len: 0x%x\n",
- (unsigned int)addr, len);
- RTSX_DEBUGP("*index = %d, *offset = %d\n", *index, *offset);
-
- addr += *offset;
-
- if ((len - *offset) > resid) {
- *offset += resid;
- len = resid;
- resid = 0;
- } else {
- resid -= (len - *offset);
- len -= *offset;
- *offset = 0;
- *index = *index + 1;
- }
- if ((i == (sg_cnt - 1)) || !resid)
- option = SG_VALID | SG_END | SG_TRANS_DATA;
- else
- option = SG_VALID | SG_TRANS_DATA;
-
- rtsx_add_sg_tbl(chip, (u32)addr, (u32)len, option);
-
- if (!resid)
- break;
-
- sg_ptr = sg_next(sg_ptr);
- }
-
- RTSX_DEBUGP("SG table count = %d\n", chip->sgi);
-
- val |= (u32)(dir & 0x01) << 29;
- val |= ADMA_MODE;
-
- spin_lock_irq(&rtsx->reg_lock);
-
- init_completion(&trans_done);
-
- rtsx_writel(chip, RTSX_HDBAR, chip->host_sg_tbl_addr);
- rtsx_writel(chip, RTSX_HDBCTLR, val);
-
- spin_unlock_irq(&rtsx->reg_lock);
-
- timeleft = wait_for_completion_interruptible_timeout(
- &trans_done, timeout * HZ / 1000);
- if (timeleft <= 0) {
- RTSX_DEBUGP("Timeout (%s %d)\n", __func__, __LINE__);
- RTSX_DEBUGP("chip->int_reg = 0x%x\n", chip->int_reg);
- err = -ETIMEDOUT;
- goto out;
- }
-
- spin_lock_irq(&rtsx->reg_lock);
- if (rtsx->trans_result == TRANS_RESULT_FAIL) {
- err = -EIO;
- spin_unlock_irq(&rtsx->reg_lock);
- goto out;
- }
- spin_unlock_irq(&rtsx->reg_lock);
-
- /* Wait for TRANS_OK_INT */
- spin_lock_irq(&rtsx->reg_lock);
- if (rtsx->trans_result == TRANS_NOT_READY) {
- init_completion(&trans_done);
- spin_unlock_irq(&rtsx->reg_lock);
- timeleft = wait_for_completion_interruptible_timeout(
- &trans_done, timeout * HZ / 1000);
- if (timeleft <= 0) {
- RTSX_DEBUGP("Timeout (%s %d)\n", __func__, __LINE__);
- RTSX_DEBUGP("chip->int_reg = 0x%x\n", chip->int_reg);
- err = -ETIMEDOUT;
- goto out;
- }
- } else {
- spin_unlock_irq(&rtsx->reg_lock);
- }
-
- spin_lock_irq(&rtsx->reg_lock);
- if (rtsx->trans_result == TRANS_RESULT_FAIL)
- err = -EIO;
- else if (rtsx->trans_result == TRANS_RESULT_OK)
- err = 0;
-
- spin_unlock_irq(&rtsx->reg_lock);
-
-out:
- rtsx->done = NULL;
- rtsx->trans_state = STATE_TRANS_NONE;
- dma_unmap_sg(&(rtsx->pci->dev), sg, num_sg, dma_dir);
-
- if (err < 0)
- rtsx_stop_cmd(chip, card);
-
- return err;
-}
-
-static int rtsx_transfer_sglist_adma(struct rtsx_chip *chip, u8 card,
- struct scatterlist *sg, int num_sg,
- enum dma_data_direction dma_dir, int timeout)
-{
- struct rtsx_dev *rtsx = chip->rtsx;
- struct completion trans_done;
- u8 dir;
- int buf_cnt, i;
- int err = 0;
- long timeleft;
- struct scatterlist *sg_ptr;
-
- if ((sg == NULL) || (num_sg <= 0))
- return -EIO;
-
- if (dma_dir == DMA_TO_DEVICE)
- dir = HOST_TO_DEVICE;
- else if (dma_dir == DMA_FROM_DEVICE)
- dir = DEVICE_TO_HOST;
- else
- return -ENXIO;
-
- if (card == SD_CARD)
- rtsx->check_card_cd = SD_EXIST;
- else if (card == MS_CARD)
- rtsx->check_card_cd = MS_EXIST;
- else if (card == XD_CARD)
- rtsx->check_card_cd = XD_EXIST;
- else
- rtsx->check_card_cd = 0;
-
- spin_lock_irq(&rtsx->reg_lock);
-
- /* set up data structures for the wakeup system */
- rtsx->done = &trans_done;
-
- rtsx->trans_state = STATE_TRANS_SG;
- rtsx->trans_result = TRANS_NOT_READY;
-
- spin_unlock_irq(&rtsx->reg_lock);
-
- buf_cnt = dma_map_sg(&(rtsx->pci->dev), sg, num_sg, dma_dir);
-
- sg_ptr = sg;
-
- for (i = 0; i <= buf_cnt / (HOST_SG_TBL_BUF_LEN / 8); i++) {
- u32 val = TRIG_DMA;
- int sg_cnt, j;
-
- if (i == buf_cnt / (HOST_SG_TBL_BUF_LEN / 8))
- sg_cnt = buf_cnt % (HOST_SG_TBL_BUF_LEN / 8);
- else
- sg_cnt = (HOST_SG_TBL_BUF_LEN / 8);
-
- chip->sgi = 0;
- for (j = 0; j < sg_cnt; j++) {
- dma_addr_t addr = sg_dma_address(sg_ptr);
- unsigned int len = sg_dma_len(sg_ptr);
- u8 option;
-
- RTSX_DEBUGP("DMA addr: 0x%x, Len: 0x%x\n",
- (unsigned int)addr, len);
-
- if (j == (sg_cnt - 1))
- option = SG_VALID | SG_END | SG_TRANS_DATA;
- else
- option = SG_VALID | SG_TRANS_DATA;
-
- rtsx_add_sg_tbl(chip, (u32)addr, (u32)len, option);
-
- sg_ptr = sg_next(sg_ptr);
- }
-
- RTSX_DEBUGP("SG table count = %d\n", chip->sgi);
-
- val |= (u32)(dir & 0x01) << 29;
- val |= ADMA_MODE;
-
- spin_lock_irq(&rtsx->reg_lock);
-
- init_completion(&trans_done);
-
- rtsx_writel(chip, RTSX_HDBAR, chip->host_sg_tbl_addr);
- rtsx_writel(chip, RTSX_HDBCTLR, val);
-
- spin_unlock_irq(&rtsx->reg_lock);
-
- timeleft = wait_for_completion_interruptible_timeout(
- &trans_done, timeout * HZ / 1000);
- if (timeleft <= 0) {
- RTSX_DEBUGP("Timeout (%s %d)\n", __func__, __LINE__);
- RTSX_DEBUGP("chip->int_reg = 0x%x\n", chip->int_reg);
- err = -ETIMEDOUT;
- goto out;
- }
-
- spin_lock_irq(&rtsx->reg_lock);
- if (rtsx->trans_result == TRANS_RESULT_FAIL) {
- err = -EIO;
- spin_unlock_irq(&rtsx->reg_lock);
- goto out;
- }
- spin_unlock_irq(&rtsx->reg_lock);
-
- sg_ptr += sg_cnt;
- }
-
- /* Wait for TRANS_OK_INT */
- spin_lock_irq(&rtsx->reg_lock);
- if (rtsx->trans_result == TRANS_NOT_READY) {
- init_completion(&trans_done);
- spin_unlock_irq(&rtsx->reg_lock);
- timeleft = wait_for_completion_interruptible_timeout(
- &trans_done, timeout * HZ / 1000);
- if (timeleft <= 0) {
- RTSX_DEBUGP("Timeout (%s %d)\n", __func__, __LINE__);
- RTSX_DEBUGP("chip->int_reg = 0x%x\n", chip->int_reg);
- err = -ETIMEDOUT;
- goto out;
- }
- } else {
- spin_unlock_irq(&rtsx->reg_lock);
- }
-
- spin_lock_irq(&rtsx->reg_lock);
- if (rtsx->trans_result == TRANS_RESULT_FAIL)
- err = -EIO;
- else if (rtsx->trans_result == TRANS_RESULT_OK)
- err = 0;
-
- spin_unlock_irq(&rtsx->reg_lock);
-
-out:
- rtsx->done = NULL;
- rtsx->trans_state = STATE_TRANS_NONE;
- dma_unmap_sg(&(rtsx->pci->dev), sg, num_sg, dma_dir);
-
- if (err < 0)
- rtsx_stop_cmd(chip, card);
-
- return err;
-}
-
-static int rtsx_transfer_buf(struct rtsx_chip *chip, u8 card, void *buf, size_t len,
- enum dma_data_direction dma_dir, int timeout)
-{
- struct rtsx_dev *rtsx = chip->rtsx;
- struct completion trans_done;
- dma_addr_t addr;
- u8 dir;
- int err = 0;
- u32 val = (1 << 31);
- long timeleft;
-
- if ((buf == NULL) || (len <= 0))
- return -EIO;
-
- if (dma_dir == DMA_TO_DEVICE)
- dir = HOST_TO_DEVICE;
- else if (dma_dir == DMA_FROM_DEVICE)
- dir = DEVICE_TO_HOST;
- else
- return -ENXIO;
-
- addr = dma_map_single(&(rtsx->pci->dev), buf, len, dma_dir);
- if (!addr)
- return -ENOMEM;
-
- if (card == SD_CARD)
- rtsx->check_card_cd = SD_EXIST;
- else if (card == MS_CARD)
- rtsx->check_card_cd = MS_EXIST;
- else if (card == XD_CARD)
- rtsx->check_card_cd = XD_EXIST;
- else
- rtsx->check_card_cd = 0;
-
- val |= (u32)(dir & 0x01) << 29;
- val |= (u32)(len & 0x00FFFFFF);
-
- spin_lock_irq(&rtsx->reg_lock);
-
- /* set up data structures for the wakeup system */
- rtsx->done = &trans_done;
-
- init_completion(&trans_done);
-
- rtsx->trans_state = STATE_TRANS_BUF;
- rtsx->trans_result = TRANS_NOT_READY;
-
- rtsx_writel(chip, RTSX_HDBAR, addr);
- rtsx_writel(chip, RTSX_HDBCTLR, val);
-
- spin_unlock_irq(&rtsx->reg_lock);
-
- /* Wait for TRANS_OK_INT */
- timeleft = wait_for_completion_interruptible_timeout(
- &trans_done, timeout * HZ / 1000);
- if (timeleft <= 0) {
- RTSX_DEBUGP("Timeout (%s %d)\n", __func__, __LINE__);
- RTSX_DEBUGP("chip->int_reg = 0x%x\n", chip->int_reg);
- err = -ETIMEDOUT;
- goto out;
- }
-
- spin_lock_irq(&rtsx->reg_lock);
- if (rtsx->trans_result == TRANS_RESULT_FAIL)
- err = -EIO;
- else if (rtsx->trans_result == TRANS_RESULT_OK)
- err = 0;
-
- spin_unlock_irq(&rtsx->reg_lock);
-
-out:
- rtsx->done = NULL;
- rtsx->trans_state = STATE_TRANS_NONE;
- dma_unmap_single(&(rtsx->pci->dev), addr, len, dma_dir);
-
- if (err < 0)
- rtsx_stop_cmd(chip, card);
-
- return err;
-}
-
-int rtsx_transfer_data_partial(struct rtsx_chip *chip, u8 card,
- void *buf, size_t len, int use_sg, unsigned int *index,
- unsigned int *offset, enum dma_data_direction dma_dir,
- int timeout)
-{
- int err = 0;
-
- /* don't transfer data during abort processing */
- if (rtsx_chk_stat(chip, RTSX_STAT_ABORT))
- return -EIO;
-
- if (use_sg) {
- err = rtsx_transfer_sglist_adma_partial(chip, card,
- (struct scatterlist *)buf, use_sg,
- index, offset, (int)len, dma_dir, timeout);
- } else {
- err = rtsx_transfer_buf(chip, card,
- buf, len, dma_dir, timeout);
- }
-
- if (err < 0) {
- if (RTSX_TST_DELINK(chip)) {
- RTSX_CLR_DELINK(chip);
- chip->need_reinit = SD_CARD | MS_CARD | XD_CARD;
- rtsx_reinit_cards(chip, 1);
- }
- }
-
- return err;
-}
-
-int rtsx_transfer_data(struct rtsx_chip *chip, u8 card, void *buf, size_t len,
- int use_sg, enum dma_data_direction dma_dir, int timeout)
-{
- int err = 0;
-
- RTSX_DEBUGP("use_sg = %d\n", use_sg);
-
- /* don't transfer data during abort processing */
- if (rtsx_chk_stat(chip, RTSX_STAT_ABORT))
- return -EIO;
-
- if (use_sg) {
- err = rtsx_transfer_sglist_adma(chip, card,
- (struct scatterlist *)buf,
- use_sg, dma_dir, timeout);
- } else {
- err = rtsx_transfer_buf(chip, card, buf, len, dma_dir, timeout);
- }
-
- if (err < 0) {
- if (RTSX_TST_DELINK(chip)) {
- RTSX_CLR_DELINK(chip);
- chip->need_reinit = SD_CARD | MS_CARD | XD_CARD;
- rtsx_reinit_cards(chip, 1);
- }
- }
-
- return err;
-}
-
diff --git a/drivers/staging/rts_pstor/rtsx_transport.h b/drivers/staging/rts_pstor/rtsx_transport.h
deleted file mode 100644
index 41f1ea0..0000000
--- a/drivers/staging/rts_pstor/rtsx_transport.h
+++ /dev/null
@@ -1,66 +0,0 @@
-/* Driver for Realtek PCI-Express card reader
- * Header file
- *
- * Copyright(c) 2009 Realtek Semiconductor Corp. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, see <http://www.gnu.org/licenses/>.
- *
- * Author:
- * wwang (wei_wang@realsil.com.cn)
- * No. 450, Shenhu Road, Suzhou Industry Park, Suzhou, China
- */
-
-#ifndef __REALTEK_RTSX_TRANSPORT_H
-#define __REALTEK_RTSX_TRANSPORT_H
-
-#include "rtsx.h"
-#include "rtsx_chip.h"
-
-#define WAIT_TIME 2000
-
-unsigned int rtsx_stor_access_xfer_buf(unsigned char *buffer,
- unsigned int buflen, struct scsi_cmnd *srb, unsigned int *index,
- unsigned int *offset, enum xfer_buf_dir dir);
-void rtsx_stor_set_xfer_buf(unsigned char *buffer,
- unsigned int buflen, struct scsi_cmnd *srb);
-void rtsx_stor_get_xfer_buf(unsigned char *buffer,
- unsigned int buflen, struct scsi_cmnd *srb);
-void rtsx_invoke_transport(struct scsi_cmnd *srb, struct rtsx_chip *chip);
-
-
-#define rtsx_init_cmd(chip) ((chip)->ci = 0)
-
-void rtsx_add_cmd(struct rtsx_chip *chip,
- u8 cmd_type, u16 reg_addr, u8 mask, u8 data);
-void rtsx_send_cmd_no_wait(struct rtsx_chip *chip);
-int rtsx_send_cmd(struct rtsx_chip *chip, u8 card, int timeout);
-
-extern inline u8 *rtsx_get_cmd_data(struct rtsx_chip *chip)
-{
-#ifdef CMD_USING_SG
- return (u8 *)(chip->host_sg_tbl_ptr);
-#else
- return (u8 *)(chip->host_cmds_ptr);
-#endif
-}
-
-int rtsx_transfer_data(struct rtsx_chip *chip, u8 card, void *buf, size_t len,
- int use_sg, enum dma_data_direction dma_dir, int timeout);
-
-int rtsx_transfer_data_partial(struct rtsx_chip *chip, u8 card, void *buf, size_t len,
- int use_sg, unsigned int *index, unsigned int *offset,
- enum dma_data_direction dma_dir, int timeout);
-
-#endif /* __REALTEK_RTSX_TRANSPORT_H */
-
diff --git a/drivers/staging/rts_pstor/sd.c b/drivers/staging/rts_pstor/sd.c
deleted file mode 100644
index c6a581c..0000000
--- a/drivers/staging/rts_pstor/sd.c
+++ /dev/null
@@ -1,4570 +0,0 @@
-/* Driver for Realtek PCI-Express card reader
- *
- * Copyright(c) 2009 Realtek Semiconductor Corp. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, see <http://www.gnu.org/licenses/>.
- *
- * Author:
- * wwang (wei_wang@realsil.com.cn)
- * No. 450, Shenhu Road, Suzhou Industry Park, Suzhou, China
- */
-
-#include <linux/blkdev.h>
-#include <linux/kthread.h>
-#include <linux/sched.h>
-
-#include "rtsx.h"
-#include "rtsx_transport.h"
-#include "rtsx_scsi.h"
-#include "rtsx_card.h"
-#include "sd.h"
-
-#define SD_MAX_RETRY_COUNT 3
-
-static u16 REG_SD_CFG1;
-static u16 REG_SD_CFG2;
-static u16 REG_SD_CFG3;
-static u16 REG_SD_STAT1;
-static u16 REG_SD_STAT2;
-static u16 REG_SD_BUS_STAT;
-static u16 REG_SD_PAD_CTL;
-static u16 REG_SD_SAMPLE_POINT_CTL;
-static u16 REG_SD_PUSH_POINT_CTL;
-static u16 REG_SD_CMD0;
-static u16 REG_SD_CMD1;
-static u16 REG_SD_CMD2;
-static u16 REG_SD_CMD3;
-static u16 REG_SD_CMD4;
-static u16 REG_SD_CMD5;
-static u16 REG_SD_BYTE_CNT_L;
-static u16 REG_SD_BYTE_CNT_H;
-static u16 REG_SD_BLOCK_CNT_L;
-static u16 REG_SD_BLOCK_CNT_H;
-static u16 REG_SD_TRANSFER;
-static u16 REG_SD_VPCLK0_CTL;
-static u16 REG_SD_VPCLK1_CTL;
-static u16 REG_SD_DCMPS0_CTL;
-static u16 REG_SD_DCMPS1_CTL;
-
-static inline void sd_set_err_code(struct rtsx_chip *chip, u8 err_code)
-{
- struct sd_info *sd_card = &(chip->sd_card);
-
- sd_card->err_code |= err_code;
-}
-
-static inline void sd_clr_err_code(struct rtsx_chip *chip)
-{
- struct sd_info *sd_card = &(chip->sd_card);
-
- sd_card->err_code = 0;
-}
-
-static inline int sd_check_err_code(struct rtsx_chip *chip, u8 err_code)
-{
- struct sd_info *sd_card = &(chip->sd_card);
-
- return sd_card->err_code & err_code;
-}
-
-static void sd_init_reg_addr(struct rtsx_chip *chip)
-{
- if (CHECK_PID(chip, 0x5209)) {
- REG_SD_CFG1 = SD_CFG1;
- REG_SD_CFG2 = SD_CFG2;
- REG_SD_CFG3 = SD_CFG3;
- REG_SD_STAT1 = SD_STAT1;
- REG_SD_STAT2 = SD_STAT2;
- REG_SD_BUS_STAT = SD_BUS_STAT;
- REG_SD_PAD_CTL = SD_PAD_CTL;
- REG_SD_SAMPLE_POINT_CTL = SD_SAMPLE_POINT_CTL;
- REG_SD_PUSH_POINT_CTL = SD_PUSH_POINT_CTL;
- REG_SD_CMD0 = SD_CMD0;
- REG_SD_CMD1 = SD_CMD1;
- REG_SD_CMD2 = SD_CMD2;
- REG_SD_CMD3 = SD_CMD3;
- REG_SD_CMD4 = SD_CMD4;
- REG_SD_CMD5 = SD_CMD5;
- REG_SD_BYTE_CNT_L = SD_BYTE_CNT_L;
- REG_SD_BYTE_CNT_H = SD_BYTE_CNT_H;
- REG_SD_BLOCK_CNT_L = SD_BLOCK_CNT_L;
- REG_SD_BLOCK_CNT_H = SD_BLOCK_CNT_H;
- REG_SD_TRANSFER = SD_TRANSFER;
- REG_SD_VPCLK0_CTL = SD_VPCLK0_CTL;
- REG_SD_VPCLK1_CTL = SD_VPCLK1_CTL;
- REG_SD_DCMPS0_CTL = SD_DCMPS0_CTL;
- REG_SD_DCMPS1_CTL = SD_DCMPS1_CTL;
- } else {
- REG_SD_CFG1 = 0xFD31;
- REG_SD_CFG2 = 0xFD33;
- REG_SD_CFG3 = 0xFD3E;
- REG_SD_STAT1 = 0xFD30;
- REG_SD_STAT2 = 0;
- REG_SD_BUS_STAT = 0;
- REG_SD_PAD_CTL = 0;
- REG_SD_SAMPLE_POINT_CTL = 0;
- REG_SD_PUSH_POINT_CTL = 0;
- REG_SD_CMD0 = 0xFD34;
- REG_SD_CMD1 = 0xFD35;
- REG_SD_CMD2 = 0xFD36;
- REG_SD_CMD3 = 0xFD37;
- REG_SD_CMD4 = 0xFD38;
- REG_SD_CMD5 = 0xFD5A;
- REG_SD_BYTE_CNT_L = 0xFD39;
- REG_SD_BYTE_CNT_H = 0xFD3A;
- REG_SD_BLOCK_CNT_L = 0xFD3B;
- REG_SD_BLOCK_CNT_H = 0xFD3C;
- REG_SD_TRANSFER = 0xFD32;
- REG_SD_VPCLK0_CTL = 0;
- REG_SD_VPCLK1_CTL = 0;
- REG_SD_DCMPS0_CTL = 0;
- REG_SD_DCMPS1_CTL = 0;
- }
-}
-
-static int sd_check_data0_status(struct rtsx_chip *chip)
-{
- u8 stat;
-
- if (CHECK_PID(chip, 0x5209))
- RTSX_READ_REG(chip, REG_SD_BUS_STAT, &stat);
- else
- RTSX_READ_REG(chip, REG_SD_STAT1, &stat);
-
- if (!(stat & SD_DAT0_STATUS)) {
- sd_set_err_code(chip, SD_BUSY);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- return STATUS_SUCCESS;
-}
-
-static int sd_send_cmd_get_rsp(struct rtsx_chip *chip, u8 cmd_idx,
- u32 arg, u8 rsp_type, u8 *rsp, int rsp_len)
-{
- struct sd_info *sd_card = &(chip->sd_card);
- int retval;
- int timeout = 100;
- u16 reg_addr;
- u8 *ptr;
- int stat_idx = 0;
- int rty_cnt = 0;
-
- sd_clr_err_code(chip);
-
- RTSX_DEBUGP("SD/MMC CMD %d, arg = 0x%08x\n", cmd_idx, arg);
-
- if (rsp_type == SD_RSP_TYPE_R1b)
- timeout = 3000;
-
-RTY_SEND_CMD:
-
- rtsx_init_cmd(chip);
-
- rtsx_add_cmd(chip, WRITE_REG_CMD, REG_SD_CMD0, 0xFF, 0x40 | cmd_idx);
- rtsx_add_cmd(chip, WRITE_REG_CMD, REG_SD_CMD1, 0xFF, (u8)(arg >> 24));
- rtsx_add_cmd(chip, WRITE_REG_CMD, REG_SD_CMD2, 0xFF, (u8)(arg >> 16));
- rtsx_add_cmd(chip, WRITE_REG_CMD, REG_SD_CMD3, 0xFF, (u8)(arg >> 8));
- rtsx_add_cmd(chip, WRITE_REG_CMD, REG_SD_CMD4, 0xFF, (u8)arg);
-
- rtsx_add_cmd(chip, WRITE_REG_CMD, REG_SD_CFG2, 0xFF, rsp_type);
- rtsx_add_cmd(chip, WRITE_REG_CMD, CARD_DATA_SOURCE,
- 0x01, PINGPONG_BUFFER);
- rtsx_add_cmd(chip, WRITE_REG_CMD, REG_SD_TRANSFER,
- 0xFF, SD_TM_CMD_RSP | SD_TRANSFER_START);
- rtsx_add_cmd(chip, CHECK_REG_CMD, REG_SD_TRANSFER,
- SD_TRANSFER_END | SD_STAT_IDLE, SD_TRANSFER_END | SD_STAT_IDLE);
-
- if (rsp_type == SD_RSP_TYPE_R2) {
- for (reg_addr = PPBUF_BASE2; reg_addr < PPBUF_BASE2 + 16; reg_addr++)
- rtsx_add_cmd(chip, READ_REG_CMD, reg_addr, 0, 0);
-
- stat_idx = 16;
- } else if (rsp_type != SD_RSP_TYPE_R0) {
- for (reg_addr = REG_SD_CMD0; reg_addr <= REG_SD_CMD4; reg_addr++)
- rtsx_add_cmd(chip, READ_REG_CMD, reg_addr, 0, 0);
-
- stat_idx = 5;
- }
-
- rtsx_add_cmd(chip, READ_REG_CMD, REG_SD_STAT1, 0, 0);
-
- retval = rtsx_send_cmd(chip, SD_CARD, timeout);
- if (retval < 0) {
- u8 val;
-
- rtsx_read_register(chip, REG_SD_STAT1, &val);
- RTSX_DEBUGP("SD_STAT1: 0x%x\n", val);
-
- if (CHECK_PID(chip, 0x5209)) {
- rtsx_read_register(chip, REG_SD_STAT2, &val);
- RTSX_DEBUGP("SD_STAT2: 0x%x\n", val);
-
- if (val & SD_RSP_80CLK_TIMEOUT) {
- rtsx_clear_sd_error(chip);
- sd_set_err_code(chip, SD_RSP_TIMEOUT);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- rtsx_read_register(chip, REG_SD_BUS_STAT, &val);
- RTSX_DEBUGP("SD_BUS_STAT: 0x%x\n", val);
- } else {
- rtsx_read_register(chip, REG_SD_CFG3, &val);
- RTSX_DEBUGP("SD_CFG3: 0x%x\n", val);
- }
-
- if (retval == -ETIMEDOUT) {
- if (rsp_type & SD_WAIT_BUSY_END) {
- retval = sd_check_data0_status(chip);
- if (retval != STATUS_SUCCESS) {
- rtsx_clear_sd_error(chip);
- TRACE_RET(chip, retval);
- }
- } else {
- sd_set_err_code(chip, SD_TO_ERR);
- }
- retval = STATUS_TIMEDOUT;
- } else {
- retval = STATUS_FAIL;
- }
- rtsx_clear_sd_error(chip);
-
- TRACE_RET(chip, retval);
- }
-
- if (rsp_type == SD_RSP_TYPE_R0)
- return STATUS_SUCCESS;
-
- ptr = rtsx_get_cmd_data(chip) + 1;
-
- if ((ptr[0] & 0xC0) != 0) {
- sd_set_err_code(chip, SD_STS_ERR);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- if (!(rsp_type & SD_NO_CHECK_CRC7)) {
- if (ptr[stat_idx] & SD_CRC7_ERR) {
- if (cmd_idx == WRITE_MULTIPLE_BLOCK) {
- sd_set_err_code(chip, SD_CRC_ERR);
- TRACE_RET(chip, STATUS_FAIL);
- }
- if (rty_cnt < SD_MAX_RETRY_COUNT) {
- wait_timeout(20);
- rty_cnt++;
- goto RTY_SEND_CMD;
- } else {
- sd_set_err_code(chip, SD_CRC_ERR);
- TRACE_RET(chip, STATUS_FAIL);
- }
- }
- }
-
- if ((rsp_type == SD_RSP_TYPE_R1) || (rsp_type == SD_RSP_TYPE_R1b)) {
- if ((cmd_idx != SEND_RELATIVE_ADDR) && (cmd_idx != SEND_IF_COND)) {
- if (cmd_idx != STOP_TRANSMISSION) {
- if (ptr[1] & 0x80)
- TRACE_RET(chip, STATUS_FAIL);
- }
-#ifdef SUPPORT_SD_LOCK
- if (ptr[1] & 0x7D)
-#else
- if (ptr[1] & 0x7F)
-#endif
- {
- RTSX_DEBUGP("ptr[1]: 0x%02x\n", ptr[1]);
- TRACE_RET(chip, STATUS_FAIL);
- }
- if (ptr[2] & 0xFF) {
- RTSX_DEBUGP("ptr[2]: 0x%02x\n", ptr[2]);
- TRACE_RET(chip, STATUS_FAIL);
- }
- if (ptr[3] & 0x80) {
- RTSX_DEBUGP("ptr[3]: 0x%02x\n", ptr[3]);
- TRACE_RET(chip, STATUS_FAIL);
- }
- if (ptr[3] & 0x01)
- sd_card->sd_data_buf_ready = 1;
- else
- sd_card->sd_data_buf_ready = 0;
- }
- }
-
- if (rsp && rsp_len)
- memcpy(rsp, ptr, rsp_len);
-
- return STATUS_SUCCESS;
-}
-
-static int sd_read_data(struct rtsx_chip *chip,
- u8 trans_mode, u8 *cmd, int cmd_len, u16 byte_cnt,
- u16 blk_cnt, u8 bus_width, u8 *buf, int buf_len,
- int timeout)
-{
- struct sd_info *sd_card = &(chip->sd_card);
- int retval;
- int i;
-
- sd_clr_err_code(chip);
-
- if (!buf)
- buf_len = 0;
-
- if (buf_len > 512)
- TRACE_RET(chip, STATUS_FAIL);
-
- rtsx_init_cmd(chip);
-
- if (cmd_len) {
- RTSX_DEBUGP("SD/MMC CMD %d\n", cmd[0] - 0x40);
- for (i = 0; i < (cmd_len < 6 ? cmd_len : 6); i++)
- rtsx_add_cmd(chip, WRITE_REG_CMD, REG_SD_CMD0 + i, 0xFF, cmd[i]);
- }
- rtsx_add_cmd(chip, WRITE_REG_CMD, REG_SD_BYTE_CNT_L, 0xFF, (u8)byte_cnt);
- rtsx_add_cmd(chip, WRITE_REG_CMD, REG_SD_BYTE_CNT_H, 0xFF, (u8)(byte_cnt >> 8));
- rtsx_add_cmd(chip, WRITE_REG_CMD, REG_SD_BLOCK_CNT_L, 0xFF, (u8)blk_cnt);
- rtsx_add_cmd(chip, WRITE_REG_CMD, REG_SD_BLOCK_CNT_H, 0xFF, (u8)(blk_cnt >> 8));
-
- rtsx_add_cmd(chip, WRITE_REG_CMD, REG_SD_CFG1, 0x03, bus_width);
-
- rtsx_add_cmd(chip, WRITE_REG_CMD, REG_SD_CFG2, 0xFF,
- SD_CALCULATE_CRC7 | SD_CHECK_CRC16 | SD_NO_WAIT_BUSY_END |
- SD_CHECK_CRC7 | SD_RSP_LEN_6);
- if (trans_mode != SD_TM_AUTO_TUNING)
- rtsx_add_cmd(chip, WRITE_REG_CMD, CARD_DATA_SOURCE, 0x01, PINGPONG_BUFFER);
-
- rtsx_add_cmd(chip, WRITE_REG_CMD, REG_SD_TRANSFER, 0xFF, trans_mode | SD_TRANSFER_START);
- rtsx_add_cmd(chip, CHECK_REG_CMD, REG_SD_TRANSFER, SD_TRANSFER_END, SD_TRANSFER_END);
-
- retval = rtsx_send_cmd(chip, SD_CARD, timeout);
- if (retval < 0) {
- if (retval == -ETIMEDOUT) {
- sd_send_cmd_get_rsp(chip, SEND_STATUS, sd_card->sd_addr,
- SD_RSP_TYPE_R1, NULL, 0);
- }
-
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- if (buf && buf_len) {
- retval = rtsx_read_ppbuf(chip, buf, buf_len);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- return STATUS_SUCCESS;
-}
-
-static int sd_write_data(struct rtsx_chip *chip, u8 trans_mode,
- u8 *cmd, int cmd_len, u16 byte_cnt, u16 blk_cnt, u8 bus_width,
- u8 *buf, int buf_len, int timeout)
-{
- struct sd_info *sd_card = &(chip->sd_card);
- int retval;
- int i;
-
- sd_clr_err_code(chip);
-
- if (!buf)
- buf_len = 0;
-
- if (buf_len > 512) {
- /* This function can't write data more than one page */
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- if (buf && buf_len) {
- retval = rtsx_write_ppbuf(chip, buf, buf_len);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- rtsx_init_cmd(chip);
-
- if (cmd_len) {
- RTSX_DEBUGP("SD/MMC CMD %d\n", cmd[0] - 0x40);
- for (i = 0; i < (cmd_len < 6 ? cmd_len : 6); i++) {
- rtsx_add_cmd(chip, WRITE_REG_CMD,
- REG_SD_CMD0 + i, 0xFF, cmd[i]);
- }
- }
- rtsx_add_cmd(chip, WRITE_REG_CMD, REG_SD_BYTE_CNT_L, 0xFF, (u8)byte_cnt);
- rtsx_add_cmd(chip, WRITE_REG_CMD, REG_SD_BYTE_CNT_H, 0xFF, (u8)(byte_cnt >> 8));
- rtsx_add_cmd(chip, WRITE_REG_CMD, REG_SD_BLOCK_CNT_L, 0xFF, (u8)blk_cnt);
- rtsx_add_cmd(chip, WRITE_REG_CMD, REG_SD_BLOCK_CNT_H, 0xFF, (u8)(blk_cnt >> 8));
-
- rtsx_add_cmd(chip, WRITE_REG_CMD, REG_SD_CFG1, 0x03, bus_width);
-
- rtsx_add_cmd(chip, WRITE_REG_CMD, REG_SD_CFG2, 0xFF,
- SD_CALCULATE_CRC7 | SD_CHECK_CRC16 | SD_NO_WAIT_BUSY_END |
- SD_CHECK_CRC7 | SD_RSP_LEN_6);
-
- rtsx_add_cmd(chip, WRITE_REG_CMD, REG_SD_TRANSFER, 0xFF, trans_mode | SD_TRANSFER_START);
- rtsx_add_cmd(chip, CHECK_REG_CMD, REG_SD_TRANSFER, SD_TRANSFER_END, SD_TRANSFER_END);
-
- retval = rtsx_send_cmd(chip, SD_CARD, timeout);
- if (retval < 0) {
- if (retval == -ETIMEDOUT) {
- sd_send_cmd_get_rsp(chip, SEND_STATUS,
- sd_card->sd_addr, SD_RSP_TYPE_R1, NULL, 0);
- }
-
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- return STATUS_SUCCESS;
-}
-
-static int sd_check_csd(struct rtsx_chip *chip, char check_wp)
-{
- struct sd_info *sd_card = &(chip->sd_card);
- int retval;
- int i;
- u8 csd_ver, trans_speed;
- u8 rsp[16];
-
- for (i = 0; i < 6; i++) {
- if (detect_card_cd(chip, SD_CARD) != STATUS_SUCCESS) {
- sd_set_err_code(chip, SD_NO_CARD);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- retval = sd_send_cmd_get_rsp(chip, SEND_CSD, sd_card->sd_addr, SD_RSP_TYPE_R2, rsp, 16);
- if (retval == STATUS_SUCCESS)
- break;
- }
-
- if (i == 6)
- TRACE_RET(chip, STATUS_FAIL);
-
- memcpy(sd_card->raw_csd, rsp + 1, 15);
-
- if (CHECK_PID(chip, 0x5209))
- RTSX_READ_REG(chip, REG_SD_CMD5, sd_card->raw_csd + 15);
-
- RTSX_DEBUGP("CSD Response:\n");
- RTSX_DUMP(sd_card->raw_csd, 16);
-
- csd_ver = (rsp[1] & 0xc0) >> 6;
- RTSX_DEBUGP("csd_ver = %d\n", csd_ver);
-
- trans_speed = rsp[4];
- if ((trans_speed & 0x07) == 0x02) {
- if ((trans_speed & 0xf8) >= 0x30) {
- if (chip->asic_code)
- sd_card->sd_clock = 47;
- else
- sd_card->sd_clock = CLK_50;
-
- } else if ((trans_speed & 0xf8) == 0x28) {
- if (chip->asic_code)
- sd_card->sd_clock = 39;
- else
- sd_card->sd_clock = CLK_40;
-
- } else if ((trans_speed & 0xf8) == 0x20) {
- if (chip->asic_code)
- sd_card->sd_clock = 29;
- else
- sd_card->sd_clock = CLK_30;
-
- } else if ((trans_speed & 0xf8) >= 0x10) {
- if (chip->asic_code)
- sd_card->sd_clock = 23;
- else
- sd_card->sd_clock = CLK_20;
-
- } else if ((trans_speed & 0x08) >= 0x08) {
- if (chip->asic_code)
- sd_card->sd_clock = 19;
- else
- sd_card->sd_clock = CLK_20;
- } else {
- TRACE_RET(chip, STATUS_FAIL);
- }
- } else {
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- if (CHK_MMC_SECTOR_MODE(sd_card)) {
- sd_card->capacity = 0;
- } else {
- if ((!CHK_SD_HCXC(sd_card)) || (csd_ver == 0)) {
- u8 blk_size, c_size_mult;
- u16 c_size;
- blk_size = rsp[6] & 0x0F;
- c_size = ((u16)(rsp[7] & 0x03) << 10)
- + ((u16)rsp[8] << 2)
- + ((u16)(rsp[9] & 0xC0) >> 6);
- c_size_mult = (u8)((rsp[10] & 0x03) << 1);
- c_size_mult += (rsp[11] & 0x80) >> 7;
- sd_card->capacity = (((u32)(c_size + 1)) * (1 << (c_size_mult + 2))) << (blk_size - 9);
- } else {
- u32 total_sector = 0;
- total_sector = (((u32)rsp[8] & 0x3f) << 16) |
- ((u32)rsp[9] << 8) | (u32)rsp[10];
- sd_card->capacity = (total_sector + 1) << 10;
- }
- }
-
- if (check_wp) {
- if (rsp[15] & 0x30)
- chip->card_wp |= SD_CARD;
-
- RTSX_DEBUGP("CSD WP Status: 0x%x\n", rsp[15]);
- }
-
- return STATUS_SUCCESS;
-}
-
-static int sd_set_sample_push_timing(struct rtsx_chip *chip)
-{
- struct sd_info *sd_card = &(chip->sd_card);
-
- if (CHECK_PID(chip, 0x5209)) {
- if (CHK_SD_SDR104(sd_card) || CHK_SD_SDR50(sd_card)) {
- RTSX_WRITE_REG(chip, SD_CFG1, 0x0C | SD_ASYNC_FIFO_NOT_RST,
- SD_30_MODE | SD_ASYNC_FIFO_NOT_RST);
- RTSX_WRITE_REG(chip, CLK_CTL, CLK_LOW_FREQ, CLK_LOW_FREQ);
- RTSX_WRITE_REG(chip, CARD_CLK_SOURCE, 0xFF,
- CRC_VAR_CLK0 | SD30_FIX_CLK | SAMPLE_VAR_CLK1);
- RTSX_WRITE_REG(chip, CLK_CTL, CLK_LOW_FREQ, 0);
- } else if (CHK_SD_DDR50(sd_card) || CHK_MMC_DDR52(sd_card)) {
- RTSX_WRITE_REG(chip, SD_CFG1, 0x0C | SD_ASYNC_FIFO_NOT_RST,
- SD_DDR_MODE | SD_ASYNC_FIFO_NOT_RST);
- RTSX_WRITE_REG(chip, CLK_CTL, CLK_LOW_FREQ, CLK_LOW_FREQ);
- RTSX_WRITE_REG(chip, CARD_CLK_SOURCE, 0xFF,
- CRC_VAR_CLK0 | SD30_FIX_CLK | SAMPLE_VAR_CLK1);
- RTSX_WRITE_REG(chip, CLK_CTL, CLK_LOW_FREQ, 0);
- RTSX_WRITE_REG(chip, SD_PUSH_POINT_CTL, DDR_VAR_TX_CMD_DAT,
- DDR_VAR_TX_CMD_DAT);
- RTSX_WRITE_REG(chip, SD_SAMPLE_POINT_CTL, DDR_VAR_RX_DAT | DDR_VAR_RX_CMD,
- DDR_VAR_RX_DAT | DDR_VAR_RX_CMD);
- } else {
- u8 val = 0;
-
- RTSX_WRITE_REG(chip, SD_CFG1, 0x0C, SD_20_MODE);
- RTSX_WRITE_REG(chip, CLK_CTL, CLK_LOW_FREQ, CLK_LOW_FREQ);
- RTSX_WRITE_REG(chip, CARD_CLK_SOURCE, 0xFF,
- CRC_FIX_CLK | SD30_VAR_CLK0 | SAMPLE_VAR_CLK1);
- RTSX_WRITE_REG(chip, CLK_CTL, CLK_LOW_FREQ, 0);
-
- if ((chip->sd_ctl & SD_PUSH_POINT_CTL_MASK) == SD_PUSH_POINT_AUTO)
- val = SD20_TX_NEG_EDGE;
- else if ((chip->sd_ctl & SD_PUSH_POINT_CTL_MASK) == SD_PUSH_POINT_DELAY)
- val = SD20_TX_14_AHEAD;
- else
- val = SD20_TX_NEG_EDGE;
-
- RTSX_WRITE_REG(chip, SD_PUSH_POINT_CTL, SD20_TX_SEL_MASK, val);
-
- if ((chip->sd_ctl & SD_SAMPLE_POINT_CTL_MASK) == SD_SAMPLE_POINT_AUTO) {
- if (chip->asic_code) {
- if (CHK_SD_HS(sd_card) || CHK_MMC_52M(sd_card))
- val = SD20_RX_14_DELAY;
- else
- val = SD20_RX_POS_EDGE;
- } else {
- val = SD20_RX_14_DELAY;
- }
- } else if ((chip->sd_ctl & SD_SAMPLE_POINT_CTL_MASK) == SD_SAMPLE_POINT_DELAY) {
- val = SD20_RX_14_DELAY;
- } else {
- val = SD20_RX_POS_EDGE;
- }
- RTSX_WRITE_REG(chip, SD_SAMPLE_POINT_CTL, SD20_RX_SEL_MASK, val);
- }
- } else {
- u8 val = 0;
-
- if ((chip->sd_ctl & SD_PUSH_POINT_CTL_MASK) == SD_PUSH_POINT_DELAY)
- val |= 0x10;
-
- if ((chip->sd_ctl & SD_SAMPLE_POINT_CTL_MASK) == SD_SAMPLE_POINT_AUTO) {
- if (chip->asic_code) {
- if (CHK_SD_HS(sd_card) || CHK_MMC_52M(sd_card)) {
- if (val & 0x10)
- val |= 0x04;
- else
- val |= 0x08;
- }
- } else {
- if (val & 0x10)
- val |= 0x04;
- else
- val |= 0x08;
- }
- } else if ((chip->sd_ctl & SD_SAMPLE_POINT_CTL_MASK) == SD_SAMPLE_POINT_DELAY) {
- if (val & 0x10)
- val |= 0x04;
- else
- val |= 0x08;
- }
-
- RTSX_WRITE_REG(chip, REG_SD_CFG1, 0x1C, val);
- }
-
- return STATUS_SUCCESS;
-}
-
-static void sd_choose_proper_clock(struct rtsx_chip *chip)
-{
- struct sd_info *sd_card = &(chip->sd_card);
-
- if (CHK_SD_SDR104(sd_card)) {
- if (chip->asic_code)
- sd_card->sd_clock = chip->asic_sd_sdr104_clk;
- else
- sd_card->sd_clock = chip->fpga_sd_sdr104_clk;
-
- } else if (CHK_SD_DDR50(sd_card)) {
- if (chip->asic_code)
- sd_card->sd_clock = chip->asic_sd_ddr50_clk;
- else
- sd_card->sd_clock = chip->fpga_sd_ddr50_clk;
-
- } else if (CHK_SD_SDR50(sd_card)) {
- if (chip->asic_code)
- sd_card->sd_clock = chip->asic_sd_sdr50_clk;
- else
- sd_card->sd_clock = chip->fpga_sd_sdr50_clk;
-
- } else if (CHK_SD_HS(sd_card)) {
- if (chip->asic_code)
- sd_card->sd_clock = chip->asic_sd_hs_clk;
- else
- sd_card->sd_clock = chip->fpga_sd_hs_clk;
-
- } else if (CHK_MMC_52M(sd_card) || CHK_MMC_DDR52(sd_card)) {
- if (chip->asic_code)
- sd_card->sd_clock = chip->asic_mmc_52m_clk;
- else
- sd_card->sd_clock = chip->fpga_mmc_52m_clk;
-
- } else if (CHK_MMC_26M(sd_card)) {
- if (chip->asic_code)
- sd_card->sd_clock = 48;
- else
- sd_card->sd_clock = CLK_50;
- }
-}
-
-static int sd_set_clock_divider(struct rtsx_chip *chip, u8 clk_div)
-{
- u8 mask = 0, val = 0;
-
- if (CHECK_PID(chip, 0x5209)) {
- mask = SD_CLK_DIVIDE_MASK;
- val = clk_div;
- } else {
- mask = 0x60;
- if (clk_div == SD_CLK_DIVIDE_0)
- val = 0x00;
- else if (clk_div == SD_CLK_DIVIDE_128)
- val = 0x40;
- else if (clk_div == SD_CLK_DIVIDE_256)
- val = 0x20;
- }
-
- RTSX_WRITE_REG(chip, REG_SD_CFG1, mask, val);
-
- return STATUS_SUCCESS;
-}
-
-static int sd_set_init_para(struct rtsx_chip *chip)
-{
- struct sd_info *sd_card = &(chip->sd_card);
- int retval;
-
- retval = sd_set_sample_push_timing(chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- sd_choose_proper_clock(chip);
-
- retval = switch_clock(chip, sd_card->sd_clock);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- return STATUS_SUCCESS;
-}
-
-int sd_select_card(struct rtsx_chip *chip, int select)
-{
- struct sd_info *sd_card = &(chip->sd_card);
- int retval;
- u8 cmd_idx, cmd_type;
- u32 addr;
-
- if (select) {
- cmd_idx = SELECT_CARD;
- cmd_type = SD_RSP_TYPE_R1;
- addr = sd_card->sd_addr;
- } else {
- cmd_idx = DESELECT_CARD;
- cmd_type = SD_RSP_TYPE_R0;
- addr = 0;
- }
-
- retval = sd_send_cmd_get_rsp(chip, cmd_idx, addr, cmd_type, NULL, 0);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- return STATUS_SUCCESS;
-}
-
-#ifdef SUPPORT_SD_LOCK
-static int sd_update_lock_status(struct rtsx_chip *chip)
-{
- struct sd_info *sd_card = &(chip->sd_card);
- int retval;
- u8 rsp[5];
-
- retval = sd_send_cmd_get_rsp(chip, SEND_STATUS, sd_card->sd_addr, SD_RSP_TYPE_R1, rsp, 5);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- if (rsp[1] & 0x02)
- sd_card->sd_lock_status |= SD_LOCKED;
- else
- sd_card->sd_lock_status &= ~SD_LOCKED;
-
- RTSX_DEBUGP("sd_card->sd_lock_status = 0x%x\n", sd_card->sd_lock_status);
-
- if (rsp[1] & 0x01)
- TRACE_RET(chip, STATUS_FAIL);
-
- return STATUS_SUCCESS;
-}
-#endif
-
-static int sd_wait_state_data_ready(struct rtsx_chip *chip, u8 state, u8 data_ready, int polling_cnt)
-{
- struct sd_info *sd_card = &(chip->sd_card);
- int retval, i;
- u8 rsp[5];
-
- for (i = 0; i < polling_cnt; i++) {
- retval = sd_send_cmd_get_rsp(chip, SEND_STATUS,
- sd_card->sd_addr, SD_RSP_TYPE_R1, rsp, 5);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- if (((rsp[3] & 0x1E) == state) && ((rsp[3] & 0x01) == data_ready))
- return STATUS_SUCCESS;
- }
-
- TRACE_RET(chip, STATUS_FAIL);
-}
-
-static int sd_change_bank_voltage(struct rtsx_chip *chip, u8 voltage)
-{
- int retval;
-
- if (voltage == SD_IO_3V3) {
- if (chip->asic_code) {
- retval = rtsx_write_phy_register(chip, 0x08, 0x4FC0 | chip->phy_voltage);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
- } else {
- RTSX_WRITE_REG(chip, SD_PAD_CTL, SD_IO_USING_1V8, 0);
- }
- } else if (voltage == SD_IO_1V8) {
- if (chip->asic_code) {
- retval = rtsx_write_phy_register(chip, 0x08, 0x4C40 | chip->phy_voltage);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
- } else {
- RTSX_WRITE_REG(chip, SD_PAD_CTL, SD_IO_USING_1V8, SD_IO_USING_1V8);
- }
- } else {
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- return STATUS_SUCCESS;
-}
-
-static int sd_voltage_switch(struct rtsx_chip *chip)
-{
- int retval;
- u8 stat;
-
- RTSX_WRITE_REG(chip, SD_BUS_STAT, SD_CLK_TOGGLE_EN | SD_CLK_FORCE_STOP, SD_CLK_TOGGLE_EN);
-
- retval = sd_send_cmd_get_rsp(chip, VOLTAGE_SWITCH, 0, SD_RSP_TYPE_R1, NULL, 0);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- udelay(chip->sd_voltage_switch_delay);
-
- RTSX_READ_REG(chip, SD_BUS_STAT, &stat);
- if (stat & (SD_CMD_STATUS | SD_DAT3_STATUS | SD_DAT2_STATUS |
- SD_DAT1_STATUS | SD_DAT0_STATUS)) {
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- RTSX_WRITE_REG(chip, SD_BUS_STAT, 0xFF, SD_CLK_FORCE_STOP);
- retval = sd_change_bank_voltage(chip, SD_IO_1V8);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- wait_timeout(50);
-
- RTSX_WRITE_REG(chip, SD_BUS_STAT, 0xFF, SD_CLK_TOGGLE_EN);
- wait_timeout(10);
-
- RTSX_READ_REG(chip, SD_BUS_STAT, &stat);
- if ((stat & (SD_CMD_STATUS | SD_DAT3_STATUS | SD_DAT2_STATUS |
- SD_DAT1_STATUS | SD_DAT0_STATUS)) !=
- (SD_CMD_STATUS | SD_DAT3_STATUS | SD_DAT2_STATUS |
- SD_DAT1_STATUS | SD_DAT0_STATUS)) {
- RTSX_DEBUGP("SD_BUS_STAT: 0x%x\n", stat);
- rtsx_write_register(chip, SD_BUS_STAT, SD_CLK_TOGGLE_EN | SD_CLK_FORCE_STOP, 0);
- rtsx_write_register(chip, CARD_CLK_EN, 0xFF, 0);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- RTSX_WRITE_REG(chip, SD_BUS_STAT, SD_CLK_TOGGLE_EN | SD_CLK_FORCE_STOP, 0);
-
- return STATUS_SUCCESS;
-}
-
-static int sd_reset_dcm(struct rtsx_chip *chip, u8 tune_dir)
-{
- if (tune_dir == TUNE_RX) {
- RTSX_WRITE_REG(chip, DCM_DRP_CTL, 0xFF, DCM_RESET | DCM_RX);
- RTSX_WRITE_REG(chip, DCM_DRP_CTL, 0xFF, DCM_RX);
- } else {
- RTSX_WRITE_REG(chip, DCM_DRP_CTL, 0xFF, DCM_RESET | DCM_TX);
- RTSX_WRITE_REG(chip, DCM_DRP_CTL, 0xFF, DCM_TX);
- }
-
- return STATUS_SUCCESS;
-}
-
-static int sd_change_phase(struct rtsx_chip *chip, u8 sample_point, u8 tune_dir)
-{
- struct sd_info *sd_card = &(chip->sd_card);
- u16 SD_VP_CTL, SD_DCMPS_CTL;
- u8 val;
- int retval;
- int ddr_rx = 0;
-
- RTSX_DEBUGP("sd_change_phase (sample_point = %d, tune_dir = %d)\n",
- sample_point, tune_dir);
-
- if (tune_dir == TUNE_RX) {
- SD_VP_CTL = SD_VPRX_CTL;
- SD_DCMPS_CTL = SD_DCMPS_RX_CTL;
- if (CHK_SD_DDR50(sd_card))
- ddr_rx = 1;
- } else {
- SD_VP_CTL = SD_VPTX_CTL;
- SD_DCMPS_CTL = SD_DCMPS_TX_CTL;
- }
-
- if (chip->asic_code) {
- RTSX_WRITE_REG(chip, CLK_CTL, CHANGE_CLK, CHANGE_CLK);
- RTSX_WRITE_REG(chip, SD_VP_CTL, 0x1F, sample_point);
- RTSX_WRITE_REG(chip, SD_VPCLK0_CTL, PHASE_NOT_RESET, 0);
- RTSX_WRITE_REG(chip, SD_VPCLK0_CTL, PHASE_NOT_RESET, PHASE_NOT_RESET);
- RTSX_WRITE_REG(chip, CLK_CTL, CHANGE_CLK, 0);
- } else {
-#ifdef CONFIG_RTS_PSTOR_DEBUG
- rtsx_read_register(chip, SD_VP_CTL, &val);
- RTSX_DEBUGP("SD_VP_CTL: 0x%x\n", val);
- rtsx_read_register(chip, SD_DCMPS_CTL, &val);
- RTSX_DEBUGP("SD_DCMPS_CTL: 0x%x\n", val);
-#endif
-
- if (ddr_rx) {
- RTSX_WRITE_REG(chip, SD_VP_CTL, PHASE_CHANGE, PHASE_CHANGE);
- udelay(50);
- RTSX_WRITE_REG(chip, SD_VP_CTL, 0xFF,
- PHASE_CHANGE | PHASE_NOT_RESET | sample_point);
- } else {
- RTSX_WRITE_REG(chip, CLK_CTL, CHANGE_CLK, CHANGE_CLK);
- udelay(50);
- RTSX_WRITE_REG(chip, SD_VP_CTL, 0xFF,
- PHASE_NOT_RESET | sample_point);
- }
- udelay(100);
-
- rtsx_init_cmd(chip);
- rtsx_add_cmd(chip, WRITE_REG_CMD, SD_DCMPS_CTL, DCMPS_CHANGE, DCMPS_CHANGE);
- rtsx_add_cmd(chip, CHECK_REG_CMD, SD_DCMPS_CTL, DCMPS_CHANGE_DONE, DCMPS_CHANGE_DONE);
- retval = rtsx_send_cmd(chip, SD_CARD, 100);
- if (retval != STATUS_SUCCESS)
- TRACE_GOTO(chip, Fail);
-
- val = *rtsx_get_cmd_data(chip);
- if (val & DCMPS_ERROR)
- TRACE_GOTO(chip, Fail);
-
- if ((val & DCMPS_CURRENT_PHASE) != sample_point)
- TRACE_GOTO(chip, Fail);
-
- RTSX_WRITE_REG(chip, SD_DCMPS_CTL, DCMPS_CHANGE, 0);
- if (ddr_rx)
- RTSX_WRITE_REG(chip, SD_VP_CTL, PHASE_CHANGE, 0);
- else
- RTSX_WRITE_REG(chip, CLK_CTL, CHANGE_CLK, 0);
-
- udelay(50);
- }
-
- RTSX_WRITE_REG(chip, SD_CFG1, SD_ASYNC_FIFO_NOT_RST, 0);
-
- return STATUS_SUCCESS;
-
-Fail:
-#ifdef CONFIG_RTS_PSTOR_DEBUG
- rtsx_read_register(chip, SD_VP_CTL, &val);
- RTSX_DEBUGP("SD_VP_CTL: 0x%x\n", val);
- rtsx_read_register(chip, SD_DCMPS_CTL, &val);
- RTSX_DEBUGP("SD_DCMPS_CTL: 0x%x\n", val);
-#endif
-
- rtsx_write_register(chip, SD_DCMPS_CTL, DCMPS_CHANGE, 0);
- rtsx_write_register(chip, SD_VP_CTL, PHASE_CHANGE, 0);
- wait_timeout(10);
- sd_reset_dcm(chip, tune_dir);
- return STATUS_FAIL;
-}
-
-static int sd_check_spec(struct rtsx_chip *chip, u8 bus_width)
-{
- struct sd_info *sd_card = &(chip->sd_card);
- int retval;
- u8 cmd[5], buf[8];
-
- retval = sd_send_cmd_get_rsp(chip, APP_CMD, sd_card->sd_addr, SD_RSP_TYPE_R1, NULL, 0);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- cmd[0] = 0x40 | SEND_SCR;
- cmd[1] = 0;
- cmd[2] = 0;
- cmd[3] = 0;
- cmd[4] = 0;
-
- retval = sd_read_data(chip, SD_TM_NORMAL_READ, cmd, 5, 8, 1, bus_width, buf, 8, 250);
- if (retval != STATUS_SUCCESS) {
- rtsx_clear_sd_error(chip);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- memcpy(sd_card->raw_scr, buf, 8);
-
- if ((buf[0] & 0x0F) == 0)
- TRACE_RET(chip, STATUS_FAIL);
-
- return STATUS_SUCCESS;
-}
-
-static int sd_query_switch_result(struct rtsx_chip *chip, u8 func_group, u8 func_to_switch,
- u8 *buf, int buf_len)
-{
- u8 support_mask = 0, query_switch = 0, switch_busy = 0;
- int support_offset = 0, query_switch_offset = 0, check_busy_offset = 0;
-
- if (func_group == SD_FUNC_GROUP_1) {
- support_offset = FUNCTION_GROUP1_SUPPORT_OFFSET;
- query_switch_offset = FUNCTION_GROUP1_QUERY_SWITCH_OFFSET;
- check_busy_offset = FUNCTION_GROUP1_CHECK_BUSY_OFFSET;
-
- switch (func_to_switch) {
- case HS_SUPPORT:
- support_mask = HS_SUPPORT_MASK;
- query_switch = HS_QUERY_SWITCH_OK;
- switch_busy = HS_SWITCH_BUSY;
- break;
-
- case SDR50_SUPPORT:
- support_mask = SDR50_SUPPORT_MASK;
- query_switch = SDR50_QUERY_SWITCH_OK;
- switch_busy = SDR50_SWITCH_BUSY;
- break;
-
- case SDR104_SUPPORT:
- support_mask = SDR104_SUPPORT_MASK;
- query_switch = SDR104_QUERY_SWITCH_OK;
- switch_busy = SDR104_SWITCH_BUSY;
- break;
-
- case DDR50_SUPPORT:
- support_mask = DDR50_SUPPORT_MASK;
- query_switch = DDR50_QUERY_SWITCH_OK;
- switch_busy = DDR50_SWITCH_BUSY;
- break;
-
- default:
- TRACE_RET(chip, STATUS_FAIL);
- }
- } else if (func_group == SD_FUNC_GROUP_3) {
- support_offset = FUNCTION_GROUP3_SUPPORT_OFFSET;
- query_switch_offset = FUNCTION_GROUP3_QUERY_SWITCH_OFFSET;
- check_busy_offset = FUNCTION_GROUP3_CHECK_BUSY_OFFSET;
-
- switch (func_to_switch) {
- case DRIVING_TYPE_A:
- support_mask = DRIVING_TYPE_A_MASK;
- query_switch = TYPE_A_QUERY_SWITCH_OK;
- switch_busy = TYPE_A_SWITCH_BUSY;
- break;
-
- case DRIVING_TYPE_C:
- support_mask = DRIVING_TYPE_C_MASK;
- query_switch = TYPE_C_QUERY_SWITCH_OK;
- switch_busy = TYPE_C_SWITCH_BUSY;
- break;
-
- case DRIVING_TYPE_D:
- support_mask = DRIVING_TYPE_D_MASK;
- query_switch = TYPE_D_QUERY_SWITCH_OK;
- switch_busy = TYPE_D_SWITCH_BUSY;
- break;
-
- default:
- TRACE_RET(chip, STATUS_FAIL);
- }
- } else if (func_group == SD_FUNC_GROUP_4) {
- support_offset = FUNCTION_GROUP4_SUPPORT_OFFSET;
- query_switch_offset = FUNCTION_GROUP4_QUERY_SWITCH_OFFSET;
- check_busy_offset = FUNCTION_GROUP4_CHECK_BUSY_OFFSET;
-
- switch (func_to_switch) {
- case CURRENT_LIMIT_400:
- support_mask = CURRENT_LIMIT_400_MASK;
- query_switch = CURRENT_LIMIT_400_QUERY_SWITCH_OK;
- switch_busy = CURRENT_LIMIT_400_SWITCH_BUSY;
- break;
-
- case CURRENT_LIMIT_600:
- support_mask = CURRENT_LIMIT_600_MASK;
- query_switch = CURRENT_LIMIT_600_QUERY_SWITCH_OK;
- switch_busy = CURRENT_LIMIT_600_SWITCH_BUSY;
- break;
-
- case CURRENT_LIMIT_800:
- support_mask = CURRENT_LIMIT_800_MASK;
- query_switch = CURRENT_LIMIT_800_QUERY_SWITCH_OK;
- switch_busy = CURRENT_LIMIT_800_SWITCH_BUSY;
- break;
-
- default:
- TRACE_RET(chip, STATUS_FAIL);
- }
- } else {
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- if (func_group == SD_FUNC_GROUP_1) {
- if (!(buf[support_offset] & support_mask) ||
- ((buf[query_switch_offset] & 0x0F) != query_switch)) {
- TRACE_RET(chip, STATUS_FAIL);
- }
- }
-
- /* Check 'Busy Status' */
- if ((buf[DATA_STRUCTURE_VER_OFFSET] == 0x01) &&
- ((buf[check_busy_offset] & switch_busy) == switch_busy)) {
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- return STATUS_SUCCESS;
-}
-
-static int sd_check_switch_mode(struct rtsx_chip *chip, u8 mode,
- u8 func_group, u8 func_to_switch, u8 bus_width)
-{
- struct sd_info *sd_card = &(chip->sd_card);
- int retval;
- u8 cmd[5], buf[64];
-
- RTSX_DEBUGP("sd_check_switch_mode (mode = %d, func_group = %d, func_to_switch = %d)\n",
- mode, func_group, func_to_switch);
-
- cmd[0] = 0x40 | SWITCH;
- cmd[1] = mode;
-
- if (func_group == SD_FUNC_GROUP_1) {
- cmd[2] = 0xFF;
- cmd[3] = 0xFF;
- cmd[4] = 0xF0 + func_to_switch;
- } else if (func_group == SD_FUNC_GROUP_3) {
- cmd[2] = 0xFF;
- cmd[3] = 0xF0 + func_to_switch;
- cmd[4] = 0xFF;
- } else if (func_group == SD_FUNC_GROUP_4) {
- cmd[2] = 0xFF;
- cmd[3] = 0x0F + (func_to_switch << 4);
- cmd[4] = 0xFF;
- } else {
- cmd[1] = SD_CHECK_MODE;
- cmd[2] = 0xFF;
- cmd[3] = 0xFF;
- cmd[4] = 0xFF;
- }
-
- retval = sd_read_data(chip, SD_TM_NORMAL_READ, cmd, 5, 64, 1, bus_width, buf, 64, 250);
- if (retval != STATUS_SUCCESS) {
- rtsx_clear_sd_error(chip);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- RTSX_DUMP(buf, 64);
-
- if (func_group == NO_ARGUMENT) {
- sd_card->func_group1_mask = buf[0x0D];
- sd_card->func_group2_mask = buf[0x0B];
- sd_card->func_group3_mask = buf[0x09];
- sd_card->func_group4_mask = buf[0x07];
-
- RTSX_DEBUGP("func_group1_mask = 0x%02x\n", buf[0x0D]);
- RTSX_DEBUGP("func_group2_mask = 0x%02x\n", buf[0x0B]);
- RTSX_DEBUGP("func_group3_mask = 0x%02x\n", buf[0x09]);
- RTSX_DEBUGP("func_group4_mask = 0x%02x\n", buf[0x07]);
- } else {
- /* Maximum current consumption, check whether current is acceptable;
- * bit[511:496] = 0x0000 means some error happened.
- */
- u16 cc = ((u16)buf[0] << 8) | buf[1];
- RTSX_DEBUGP("Maximum current consumption: %dmA\n", cc);
- if ((cc == 0) || (cc > 800))
- TRACE_RET(chip, STATUS_FAIL);
-
- retval = sd_query_switch_result(chip, func_group, func_to_switch, buf, 64);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- if ((cc > 400) || (func_to_switch > CURRENT_LIMIT_400)) {
- RTSX_WRITE_REG(chip, OCPPARA2, SD_OCP_THD_MASK, chip->sd_800mA_ocp_thd);
- RTSX_WRITE_REG(chip, CARD_PWR_CTL, PMOS_STRG_MASK, PMOS_STRG_800mA);
- }
- }
-
- return STATUS_SUCCESS;
-}
-
-static u8 downgrade_switch_mode(u8 func_group, u8 func_to_switch)
-{
- if (func_group == SD_FUNC_GROUP_1) {
- if (func_to_switch > HS_SUPPORT)
- func_to_switch--;
-
- } else if (func_group == SD_FUNC_GROUP_4) {
- if (func_to_switch > CURRENT_LIMIT_200)
- func_to_switch--;
- }
-
- return func_to_switch;
-}
-
-static int sd_check_switch(struct rtsx_chip *chip,
- u8 func_group, u8 func_to_switch, u8 bus_width)
-{
- int retval;
- int i;
- int switch_good = 0;
-
- for (i = 0; i < 3; i++) {
- if (detect_card_cd(chip, SD_CARD) != STATUS_SUCCESS) {
- sd_set_err_code(chip, SD_NO_CARD);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- retval = sd_check_switch_mode(chip, SD_CHECK_MODE, func_group,
- func_to_switch, bus_width);
- if (retval == STATUS_SUCCESS) {
- u8 stat;
-
- retval = sd_check_switch_mode(chip, SD_SWITCH_MODE,
- func_group, func_to_switch, bus_width);
- if (retval == STATUS_SUCCESS) {
- switch_good = 1;
- break;
- }
-
- RTSX_READ_REG(chip, SD_STAT1, &stat);
- if (stat & SD_CRC16_ERR) {
- RTSX_DEBUGP("SD CRC16 error when switching mode\n");
- TRACE_RET(chip, STATUS_FAIL);
- }
- }
-
- func_to_switch = downgrade_switch_mode(func_group, func_to_switch);
-
- wait_timeout(20);
- }
-
- if (!switch_good)
- TRACE_RET(chip, STATUS_FAIL);
-
- return STATUS_SUCCESS;
-}
-
-static int sd_switch_function(struct rtsx_chip *chip, u8 bus_width)
-{
- struct sd_info *sd_card = &(chip->sd_card);
- int retval;
- int i;
- u8 func_to_switch = 0;
-
- /* Get supported functions */
- retval = sd_check_switch_mode(chip, SD_CHECK_MODE,
- NO_ARGUMENT, NO_ARGUMENT, bus_width);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- sd_card->func_group1_mask &= ~(sd_card->sd_switch_fail);
-
- /* Function Group 1: Access Mode */
- for (i = 0; i < 4; i++) {
- switch ((u8)(chip->sd_speed_prior >> (i*8))) {
- case SDR104_SUPPORT:
- if ((sd_card->func_group1_mask & SDR104_SUPPORT_MASK)
- && chip->sdr104_en) {
- func_to_switch = SDR104_SUPPORT;
- }
- break;
-
- case DDR50_SUPPORT:
- if ((sd_card->func_group1_mask & DDR50_SUPPORT_MASK)
- && chip->ddr50_en) {
- func_to_switch = DDR50_SUPPORT;
- }
- break;
-
- case SDR50_SUPPORT:
- if ((sd_card->func_group1_mask & SDR50_SUPPORT_MASK)
- && chip->sdr50_en) {
- func_to_switch = SDR50_SUPPORT;
- }
- break;
-
- case HS_SUPPORT:
- if (sd_card->func_group1_mask & HS_SUPPORT_MASK)
- func_to_switch = HS_SUPPORT;
-
- break;
-
- default:
- continue;
- }
-
-
- if (func_to_switch)
- break;
-
- }
- RTSX_DEBUGP("SD_FUNC_GROUP_1: func_to_switch = 0x%02x", func_to_switch);
-
-#ifdef SUPPORT_SD_LOCK
- if ((sd_card->sd_lock_status & SD_SDR_RST)
- && (DDR50_SUPPORT == func_to_switch)
- && (sd_card->func_group1_mask & SDR50_SUPPORT_MASK)) {
- func_to_switch = SDR50_SUPPORT;
- RTSX_DEBUGP("Using SDR50 instead of DDR50 for SD Lock\n");
- }
-#endif
-
- if (func_to_switch) {
- retval = sd_check_switch(chip, SD_FUNC_GROUP_1, func_to_switch, bus_width);
- if (retval != STATUS_SUCCESS) {
- if (func_to_switch == SDR104_SUPPORT) {
- sd_card->sd_switch_fail = SDR104_SUPPORT_MASK;
- } else if (func_to_switch == DDR50_SUPPORT) {
- sd_card->sd_switch_fail =
- SDR104_SUPPORT_MASK | DDR50_SUPPORT_MASK;
- } else if (func_to_switch == SDR50_SUPPORT) {
- sd_card->sd_switch_fail =
- SDR104_SUPPORT_MASK | DDR50_SUPPORT_MASK |
- SDR50_SUPPORT_MASK;
- }
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- if (func_to_switch == SDR104_SUPPORT)
- SET_SD_SDR104(sd_card);
- else if (func_to_switch == DDR50_SUPPORT)
- SET_SD_DDR50(sd_card);
- else if (func_to_switch == SDR50_SUPPORT)
- SET_SD_SDR50(sd_card);
- else
- SET_SD_HS(sd_card);
- }
-
- if (CHK_SD_DDR50(sd_card)) {
- RTSX_WRITE_REG(chip, SD_PUSH_POINT_CTL, 0x06, 0x04);
- retval = sd_set_sample_push_timing(chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- if (!func_to_switch || (func_to_switch == HS_SUPPORT)) {
- /* Do not try to switch current limit if the card doesn't
- * support UHS mode or we don't want it to support UHS mode
- */
- return STATUS_SUCCESS;
- }
-
- /* Function Group 4: Current Limit */
- func_to_switch = 0xFF;
-
- for (i = 0; i < 4; i++) {
- switch ((u8)(chip->sd_current_prior >> (i*8))) {
- case CURRENT_LIMIT_800:
- if (sd_card->func_group4_mask & CURRENT_LIMIT_800_MASK)
- func_to_switch = CURRENT_LIMIT_800;
-
- break;
-
- case CURRENT_LIMIT_600:
- if (sd_card->func_group4_mask & CURRENT_LIMIT_600_MASK)
- func_to_switch = CURRENT_LIMIT_600;
-
- break;
-
- case CURRENT_LIMIT_400:
- if (sd_card->func_group4_mask & CURRENT_LIMIT_400_MASK)
- func_to_switch = CURRENT_LIMIT_400;
-
- break;
-
- case CURRENT_LIMIT_200:
- if (sd_card->func_group4_mask & CURRENT_LIMIT_200_MASK)
- func_to_switch = CURRENT_LIMIT_200;
-
- break;
-
- default:
- continue;
- }
-
- if (func_to_switch != 0xFF)
- break;
- }
-
- RTSX_DEBUGP("SD_FUNC_GROUP_4: func_to_switch = 0x%02x", func_to_switch);
-
- if (func_to_switch <= CURRENT_LIMIT_800) {
- retval = sd_check_switch(chip, SD_FUNC_GROUP_4, func_to_switch, bus_width);
- if (retval != STATUS_SUCCESS) {
- if (sd_check_err_code(chip, SD_NO_CARD))
- TRACE_RET(chip, STATUS_FAIL);
- }
- RTSX_DEBUGP("Switch current limit finished! (%d)\n", retval);
- }
-
- if (CHK_SD_DDR50(sd_card))
- RTSX_WRITE_REG(chip, SD_PUSH_POINT_CTL, 0x06, 0);
-
- return STATUS_SUCCESS;
-}
-
-static int sd_wait_data_idle(struct rtsx_chip *chip)
-{
- int retval = STATUS_TIMEDOUT;
- int i;
- u8 val = 0;
-
- for (i = 0; i < 100; i++) {
- RTSX_READ_REG(chip, SD_DATA_STATE, &val);
- if (val & SD_DATA_IDLE) {
- retval = STATUS_SUCCESS;
- break;
- }
- udelay(100);
- }
- RTSX_DEBUGP("SD_DATA_STATE: 0x%02x\n", val);
-
- return retval;
-}
-
-static int sd_sdr_tuning_rx_cmd(struct rtsx_chip *chip, u8 sample_point)
-{
- int retval;
- u8 cmd[5];
-
- retval = sd_change_phase(chip, sample_point, TUNE_RX);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- cmd[0] = 0x40 | SEND_TUNING_PATTERN;
- cmd[1] = 0;
- cmd[2] = 0;
- cmd[3] = 0;
- cmd[4] = 0;
-
- retval = sd_read_data(chip, SD_TM_AUTO_TUNING,
- cmd, 5, 0x40, 1, SD_BUS_WIDTH_4, NULL, 0, 100);
- if (retval != STATUS_SUCCESS) {
- (void)sd_wait_data_idle(chip);
-
- rtsx_clear_sd_error(chip);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- return STATUS_SUCCESS;
-}
-
-static int sd_ddr_tuning_rx_cmd(struct rtsx_chip *chip, u8 sample_point)
-{
- struct sd_info *sd_card = &(chip->sd_card);
- int retval;
- u8 cmd[5];
-
- retval = sd_change_phase(chip, sample_point, TUNE_RX);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- RTSX_DEBUGP("sd ddr tuning rx\n");
-
- retval = sd_send_cmd_get_rsp(chip, APP_CMD, sd_card->sd_addr, SD_RSP_TYPE_R1, NULL, 0);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- cmd[0] = 0x40 | SD_STATUS;
- cmd[1] = 0;
- cmd[2] = 0;
- cmd[3] = 0;
- cmd[4] = 0;
-
- retval = sd_read_data(chip, SD_TM_NORMAL_READ,
- cmd, 5, 64, 1, SD_BUS_WIDTH_4, NULL, 0, 100);
- if (retval != STATUS_SUCCESS) {
- (void)sd_wait_data_idle(chip);
-
- rtsx_clear_sd_error(chip);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- return STATUS_SUCCESS;
-}
-
-static int mmc_ddr_tunning_rx_cmd(struct rtsx_chip *chip, u8 sample_point)
-{
- struct sd_info *sd_card = &(chip->sd_card);
- int retval;
- u8 cmd[5], bus_width;
-
- if (CHK_MMC_8BIT(sd_card))
- bus_width = SD_BUS_WIDTH_8;
- else if (CHK_MMC_4BIT(sd_card))
- bus_width = SD_BUS_WIDTH_4;
- else
- bus_width = SD_BUS_WIDTH_1;
-
- retval = sd_change_phase(chip, sample_point, TUNE_RX);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- RTSX_DEBUGP("mmc ddr tuning rx\n");
-
- cmd[0] = 0x40 | SEND_EXT_CSD;
- cmd[1] = 0;
- cmd[2] = 0;
- cmd[3] = 0;
- cmd[4] = 0;
-
- retval = sd_read_data(chip, SD_TM_NORMAL_READ,
- cmd, 5, 0x200, 1, bus_width, NULL, 0, 100);
- if (retval != STATUS_SUCCESS) {
- (void)sd_wait_data_idle(chip);
-
- rtsx_clear_sd_error(chip);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- return STATUS_SUCCESS;
-}
-
-static int sd_sdr_tuning_tx_cmd(struct rtsx_chip *chip, u8 sample_point)
-{
- struct sd_info *sd_card = &(chip->sd_card);
- int retval;
-
- retval = sd_change_phase(chip, sample_point, TUNE_TX);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- RTSX_WRITE_REG(chip, SD_CFG3, SD_RSP_80CLK_TIMEOUT_EN, SD_RSP_80CLK_TIMEOUT_EN);
-
- retval = sd_send_cmd_get_rsp(chip, SEND_STATUS, sd_card->sd_addr,
- SD_RSP_TYPE_R1, NULL, 0);
- if (retval != STATUS_SUCCESS) {
- if (sd_check_err_code(chip, SD_RSP_TIMEOUT)) {
- rtsx_write_register(chip, SD_CFG3, SD_RSP_80CLK_TIMEOUT_EN, 0);
- TRACE_RET(chip, STATUS_FAIL);
- }
- }
-
- RTSX_WRITE_REG(chip, SD_CFG3, SD_RSP_80CLK_TIMEOUT_EN, 0);
-
- return STATUS_SUCCESS;
-}
-
-static int sd_ddr_tuning_tx_cmd(struct rtsx_chip *chip, u8 sample_point)
-{
- struct sd_info *sd_card = &(chip->sd_card);
- int retval;
- u8 cmd[5], bus_width;
-
- retval = sd_change_phase(chip, sample_point, TUNE_TX);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- if (CHK_SD(sd_card)) {
- bus_width = SD_BUS_WIDTH_4;
- } else {
- if (CHK_MMC_8BIT(sd_card))
- bus_width = SD_BUS_WIDTH_8;
- else if (CHK_MMC_4BIT(sd_card))
- bus_width = SD_BUS_WIDTH_4;
- else
- bus_width = SD_BUS_WIDTH_1;
- }
-
- retval = sd_wait_state_data_ready(chip, 0x08, 1, 1000);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- RTSX_WRITE_REG(chip, SD_CFG3, SD_RSP_80CLK_TIMEOUT_EN, SD_RSP_80CLK_TIMEOUT_EN);
-
- cmd[0] = 0x40 | PROGRAM_CSD;
- cmd[1] = 0;
- cmd[2] = 0;
- cmd[3] = 0;
- cmd[4] = 0;
-
- retval = sd_write_data(chip, SD_TM_AUTO_WRITE_2,
- cmd, 5, 16, 1, bus_width, sd_card->raw_csd, 16, 100);
- if (retval != STATUS_SUCCESS) {
- rtsx_clear_sd_error(chip);
- rtsx_write_register(chip, SD_CFG3, SD_RSP_80CLK_TIMEOUT_EN, 0);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- RTSX_WRITE_REG(chip, SD_CFG3, SD_RSP_80CLK_TIMEOUT_EN, 0);
-
- sd_send_cmd_get_rsp(chip, SEND_STATUS, sd_card->sd_addr, SD_RSP_TYPE_R1, NULL, 0);
-
- return STATUS_SUCCESS;
-}
-
-static u8 sd_search_final_phase(struct rtsx_chip *chip, u32 phase_map, u8 tune_dir)
-{
- struct sd_info *sd_card = &(chip->sd_card);
- struct timing_phase_path path[MAX_PHASE + 1];
- int i, j, cont_path_cnt;
- int new_block, max_len, final_path_idx;
- u8 final_phase = 0xFF;
-
- if (phase_map == 0xFFFFFFFF) {
- if (tune_dir == TUNE_RX)
- final_phase = (u8)chip->sd_default_rx_phase;
- else
- final_phase = (u8)chip->sd_default_tx_phase;
-
- goto Search_Finish;
- }
-
- cont_path_cnt = 0;
- new_block = 1;
- j = 0;
- for (i = 0; i < MAX_PHASE + 1; i++) {
- if (phase_map & (1 << i)) {
- if (new_block) {
- new_block = 0;
- j = cont_path_cnt++;
- path[j].start = i;
- path[j].end = i;
- } else {
- path[j].end = i;
- }
- } else {
- new_block = 1;
- if (cont_path_cnt) {
- int idx = cont_path_cnt - 1;
- path[idx].len = path[idx].end - path[idx].start + 1;
- path[idx].mid = path[idx].start + path[idx].len / 2;
- }
- }
- }
-
- if (cont_path_cnt == 0) {
- RTSX_DEBUGP("No continuous phase path\n");
- goto Search_Finish;
- } else {
- int idx = cont_path_cnt - 1;
- path[idx].len = path[idx].end - path[idx].start + 1;
- path[idx].mid = path[idx].start + path[idx].len / 2;
- }
-
- if ((path[0].start == 0) && (path[cont_path_cnt - 1].end == MAX_PHASE)) {
- path[0].start = path[cont_path_cnt - 1].start - MAX_PHASE - 1;
- path[0].len += path[cont_path_cnt - 1].len;
- path[0].mid = path[0].start + path[0].len / 2;
- if (path[0].mid < 0)
- path[0].mid += MAX_PHASE + 1;
-
- cont_path_cnt--;
- }
-
- max_len = 0;
- final_phase = 0;
- final_path_idx = 0;
- for (i = 0; i < cont_path_cnt; i++) {
- if (path[i].len > max_len) {
- max_len = path[i].len;
- final_phase = (u8)path[i].mid;
- final_path_idx = i;
- }
-
- RTSX_DEBUGP("path[%d].start = %d\n", i, path[i].start);
- RTSX_DEBUGP("path[%d].end = %d\n", i, path[i].end);
- RTSX_DEBUGP("path[%d].len = %d\n", i, path[i].len);
- RTSX_DEBUGP("path[%d].mid = %d\n", i, path[i].mid);
- RTSX_DEBUGP("\n");
- }
-
- if (tune_dir == TUNE_TX) {
- if (CHK_SD_SDR104(sd_card)) {
- if (max_len > 15) {
- int temp_mid = (max_len - 16) / 2;
- int temp_final_phase =
- path[final_path_idx].end - (max_len - (6 + temp_mid));
-
- if (temp_final_phase < 0)
- final_phase = (u8)(temp_final_phase + MAX_PHASE + 1);
- else
- final_phase = (u8)temp_final_phase;
- }
- } else if (CHK_SD_SDR50(sd_card)) {
- if (max_len > 12) {
- int temp_mid = (max_len - 13) / 2;
- int temp_final_phase =
- path[final_path_idx].end - (max_len - (3 + temp_mid));
-
- if (temp_final_phase < 0)
- final_phase = (u8)(temp_final_phase + MAX_PHASE + 1);
- else
- final_phase = (u8)temp_final_phase;
- }
- }
- }
-
-Search_Finish:
- RTSX_DEBUGP("Final chosen phase: %d\n", final_phase);
- return final_phase;
-}
-
-static int sd_tuning_rx(struct rtsx_chip *chip)
-{
- struct sd_info *sd_card = &(chip->sd_card);
- int retval;
- int i, j;
- u32 raw_phase_map[3], phase_map;
- u8 final_phase;
- int (*tuning_cmd)(struct rtsx_chip *chip, u8 sample_point);
-
- if (CHK_SD(sd_card)) {
- if (CHK_SD_DDR50(sd_card))
- tuning_cmd = sd_ddr_tuning_rx_cmd;
- else
- tuning_cmd = sd_sdr_tuning_rx_cmd;
-
- } else {
- if (CHK_MMC_DDR52(sd_card))
- tuning_cmd = mmc_ddr_tunning_rx_cmd;
- else
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- for (i = 0; i < 3; i++) {
- raw_phase_map[i] = 0;
- for (j = MAX_PHASE; j >= 0; j--) {
- if (detect_card_cd(chip, SD_CARD) != STATUS_SUCCESS) {
- sd_set_err_code(chip, SD_NO_CARD);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- retval = tuning_cmd(chip, (u8)j);
- if (retval == STATUS_SUCCESS)
- raw_phase_map[i] |= 1 << j;
- }
- }
-
- phase_map = raw_phase_map[0] & raw_phase_map[1] & raw_phase_map[2];
- for (i = 0; i < 3; i++)
- RTSX_DEBUGP("RX raw_phase_map[%d] = 0x%08x\n", i, raw_phase_map[i]);
-
- RTSX_DEBUGP("RX phase_map = 0x%08x\n", phase_map);
-
- final_phase = sd_search_final_phase(chip, phase_map, TUNE_RX);
- if (final_phase == 0xFF)
- TRACE_RET(chip, STATUS_FAIL);
-
- retval = sd_change_phase(chip, final_phase, TUNE_RX);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- return STATUS_SUCCESS;
-}
-
-static int sd_ddr_pre_tuning_tx(struct rtsx_chip *chip)
-{
- struct sd_info *sd_card = &(chip->sd_card);
- int retval;
- int i;
- u32 phase_map;
- u8 final_phase;
-
- RTSX_WRITE_REG(chip, SD_CFG3, SD_RSP_80CLK_TIMEOUT_EN, SD_RSP_80CLK_TIMEOUT_EN);
-
- phase_map = 0;
- for (i = MAX_PHASE; i >= 0; i--) {
- if (detect_card_cd(chip, SD_CARD) != STATUS_SUCCESS) {
- sd_set_err_code(chip, SD_NO_CARD);
- rtsx_write_register(chip, SD_CFG3,
- SD_RSP_80CLK_TIMEOUT_EN, 0);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- retval = sd_change_phase(chip, (u8)i, TUNE_TX);
- if (retval != STATUS_SUCCESS)
- continue;
-
- retval = sd_send_cmd_get_rsp(chip, SEND_STATUS, sd_card->sd_addr,
- SD_RSP_TYPE_R1, NULL, 0);
- if ((retval == STATUS_SUCCESS) || !sd_check_err_code(chip, SD_RSP_TIMEOUT))
- phase_map |= 1 << i;
- }
-
- RTSX_WRITE_REG(chip, SD_CFG3, SD_RSP_80CLK_TIMEOUT_EN, 0);
-
- RTSX_DEBUGP("DDR TX pre tune phase_map = 0x%08x\n", phase_map);
-
- final_phase = sd_search_final_phase(chip, phase_map, TUNE_TX);
- if (final_phase == 0xFF)
- TRACE_RET(chip, STATUS_FAIL);
-
- retval = sd_change_phase(chip, final_phase, TUNE_TX);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- RTSX_DEBUGP("DDR TX pre tune phase: %d\n", (int)final_phase);
-
- return STATUS_SUCCESS;
-}
-
-static int sd_tuning_tx(struct rtsx_chip *chip)
-{
- struct sd_info *sd_card = &(chip->sd_card);
- int retval;
- int i, j;
- u32 raw_phase_map[3], phase_map;
- u8 final_phase;
- int (*tuning_cmd)(struct rtsx_chip *chip, u8 sample_point);
-
- if (CHK_SD(sd_card)) {
- if (CHK_SD_DDR50(sd_card))
- tuning_cmd = sd_ddr_tuning_tx_cmd;
- else
- tuning_cmd = sd_sdr_tuning_tx_cmd;
-
- } else {
- if (CHK_MMC_DDR52(sd_card))
- tuning_cmd = sd_ddr_tuning_tx_cmd;
- else
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- for (i = 0; i < 3; i++) {
- raw_phase_map[i] = 0;
- for (j = MAX_PHASE; j >= 0; j--) {
- if (detect_card_cd(chip, SD_CARD) != STATUS_SUCCESS) {
- sd_set_err_code(chip, SD_NO_CARD);
- rtsx_write_register(chip, SD_CFG3,
- SD_RSP_80CLK_TIMEOUT_EN, 0);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- retval = tuning_cmd(chip, (u8)j);
- if (retval == STATUS_SUCCESS)
- raw_phase_map[i] |= 1 << j;
- }
- }
-
- phase_map = raw_phase_map[0] & raw_phase_map[1] & raw_phase_map[2];
- for (i = 0; i < 3; i++)
- RTSX_DEBUGP("TX raw_phase_map[%d] = 0x%08x\n", i, raw_phase_map[i]);
-
- RTSX_DEBUGP("TX phase_map = 0x%08x\n", phase_map);
-
- final_phase = sd_search_final_phase(chip, phase_map, TUNE_TX);
- if (final_phase == 0xFF)
- TRACE_RET(chip, STATUS_FAIL);
-
- retval = sd_change_phase(chip, final_phase, TUNE_TX);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- return STATUS_SUCCESS;
-}
-
-static int sd_sdr_tuning(struct rtsx_chip *chip)
-{
- int retval;
-
- retval = sd_tuning_tx(chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- retval = sd_tuning_rx(chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- return STATUS_SUCCESS;
-}
-
-static int sd_ddr_tuning(struct rtsx_chip *chip)
-{
- int retval;
-
- if (!(chip->sd_ctl & SD_DDR_TX_PHASE_SET_BY_USER)) {
- retval = sd_ddr_pre_tuning_tx(chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
- } else {
- retval = sd_change_phase(chip, (u8)chip->sd_ddr_tx_phase, TUNE_TX);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- retval = sd_tuning_rx(chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- if (!(chip->sd_ctl & SD_DDR_TX_PHASE_SET_BY_USER)) {
- retval = sd_tuning_tx(chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- return STATUS_SUCCESS;
-}
-
-static int mmc_ddr_tuning(struct rtsx_chip *chip)
-{
- int retval;
-
- if (!(chip->sd_ctl & MMC_DDR_TX_PHASE_SET_BY_USER)) {
- retval = sd_ddr_pre_tuning_tx(chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
- } else {
- retval = sd_change_phase(chip, (u8)chip->mmc_ddr_tx_phase, TUNE_TX);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- retval = sd_tuning_rx(chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- if (!(chip->sd_ctl & MMC_DDR_TX_PHASE_SET_BY_USER)) {
- retval = sd_tuning_tx(chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- return STATUS_SUCCESS;
-}
-
-int sd_switch_clock(struct rtsx_chip *chip)
-{
- struct sd_info *sd_card = &(chip->sd_card);
- int retval;
- int re_tuning = 0;
-
- retval = select_card(chip, SD_CARD);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- if (CHECK_PID(chip, 0x5209) &&
- (CHK_SD30_SPEED(sd_card) || CHK_MMC_DDR52(sd_card))) {
- if (sd_card->need_retune && (sd_card->sd_clock != chip->cur_clk)) {
- re_tuning = 1;
- sd_card->need_retune = 0;
- }
- }
-
- retval = switch_clock(chip, sd_card->sd_clock);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- if (re_tuning) {
- if (CHK_SD(sd_card)) {
- if (CHK_SD_DDR50(sd_card))
- retval = sd_ddr_tuning(chip);
- else
- retval = sd_sdr_tuning(chip);
- } else {
- if (CHK_MMC_DDR52(sd_card))
- retval = mmc_ddr_tuning(chip);
- }
-
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- return STATUS_SUCCESS;
-}
-
-static int sd_prepare_reset(struct rtsx_chip *chip)
-{
- struct sd_info *sd_card = &(chip->sd_card);
- int retval;
-
- if (chip->asic_code)
- sd_card->sd_clock = 29;
- else
- sd_card->sd_clock = CLK_30;
-
- sd_card->sd_type = 0;
- sd_card->seq_mode = 0;
- sd_card->sd_data_buf_ready = 0;
- sd_card->capacity = 0;
-
-#ifdef SUPPORT_SD_LOCK
- sd_card->sd_lock_status = 0;
- sd_card->sd_erase_status = 0;
-#endif
-
- chip->capacity[chip->card2lun[SD_CARD]] = 0;
- chip->sd_io = 0;
-
- retval = sd_set_init_para(chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, retval);
-
- if (CHECK_PID(chip, 0x5209)) {
- RTSX_WRITE_REG(chip, REG_SD_CFG1, 0xFF,
- SD_CLK_DIVIDE_128 | SD_20_MODE | SD_BUS_WIDTH_1);
- RTSX_WRITE_REG(chip, SD_SAMPLE_POINT_CTL, 0xFF, SD20_RX_POS_EDGE);
- RTSX_WRITE_REG(chip, SD_PUSH_POINT_CTL, 0xFF, 0);
- } else {
- RTSX_WRITE_REG(chip, REG_SD_CFG1, 0xFF, 0x40);
- }
-
- RTSX_WRITE_REG(chip, CARD_STOP, SD_STOP | SD_CLR_ERR, SD_STOP | SD_CLR_ERR);
-
- retval = select_card(chip, SD_CARD);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- return STATUS_SUCCESS;
-}
-
-static int sd_pull_ctl_disable(struct rtsx_chip *chip)
-{
- if (CHECK_PID(chip, 0x5209)) {
- RTSX_WRITE_REG(chip, CARD_PULL_CTL1, 0xFF, 0x55);
- RTSX_WRITE_REG(chip, CARD_PULL_CTL2, 0xFF, 0x55);
- RTSX_WRITE_REG(chip, CARD_PULL_CTL3, 0xFF, 0xD5);
- } else if (CHECK_PID(chip, 0x5208)) {
- RTSX_WRITE_REG(chip, CARD_PULL_CTL1, 0xFF,
- XD_D3_PD | SD_D7_PD | SD_CLK_PD | SD_D5_PD);
- RTSX_WRITE_REG(chip, CARD_PULL_CTL2, 0xFF,
- SD_D6_PD | SD_D0_PD | SD_D1_PD | XD_D5_PD);
- RTSX_WRITE_REG(chip, CARD_PULL_CTL3, 0xFF,
- SD_D4_PD | XD_CE_PD | XD_CLE_PD | XD_CD_PU);
- RTSX_WRITE_REG(chip, CARD_PULL_CTL4, 0xFF,
- XD_RDY_PD | SD_D3_PD | SD_D2_PD | XD_ALE_PD);
- RTSX_WRITE_REG(chip, CARD_PULL_CTL5, 0xFF,
- MS_INS_PU | SD_WP_PD | SD_CD_PU | SD_CMD_PD);
- RTSX_WRITE_REG(chip, CARD_PULL_CTL6, 0xFF, MS_D5_PD | MS_D4_PD);
- } else if (CHECK_PID(chip, 0x5288)) {
- if (CHECK_BARO_PKG(chip, QFN)) {
- RTSX_WRITE_REG(chip, CARD_PULL_CTL1, 0xFF, 0x55);
- RTSX_WRITE_REG(chip, CARD_PULL_CTL2, 0xFF, 0x55);
- RTSX_WRITE_REG(chip, CARD_PULL_CTL3, 0xFF, 0x4B);
- RTSX_WRITE_REG(chip, CARD_PULL_CTL4, 0xFF, 0x69);
- }
- }
-
- return STATUS_SUCCESS;
-}
-
-int sd_pull_ctl_enable(struct rtsx_chip *chip)
-{
- int retval;
-
- rtsx_init_cmd(chip);
-
- if (CHECK_PID(chip, 0x5209)) {
- rtsx_add_cmd(chip, WRITE_REG_CMD, CARD_PULL_CTL1, 0xFF, 0xAA);
- rtsx_add_cmd(chip, WRITE_REG_CMD, CARD_PULL_CTL2, 0xFF, 0xAA);
- rtsx_add_cmd(chip, WRITE_REG_CMD, CARD_PULL_CTL3, 0xFF, 0xE9);
- } else if (CHECK_PID(chip, 0x5208)) {
- rtsx_add_cmd(chip, WRITE_REG_CMD, CARD_PULL_CTL1, 0xFF,
- XD_D3_PD | SD_DAT7_PU | SD_CLK_NP | SD_D5_PU);
- rtsx_add_cmd(chip, WRITE_REG_CMD, CARD_PULL_CTL2, 0xFF,
- SD_D6_PU | SD_D0_PU | SD_D1_PU | XD_D5_PD);
- rtsx_add_cmd(chip, WRITE_REG_CMD, CARD_PULL_CTL3, 0xFF,
- SD_D4_PU | XD_CE_PD | XD_CLE_PD | XD_CD_PU);
- rtsx_add_cmd(chip, WRITE_REG_CMD, CARD_PULL_CTL4, 0xFF,
- XD_RDY_PD | SD_D3_PU | SD_D2_PU | XD_ALE_PD);
- rtsx_add_cmd(chip, WRITE_REG_CMD, CARD_PULL_CTL5, 0xFF,
- MS_INS_PU | SD_WP_PU | SD_CD_PU | SD_CMD_PU);
- rtsx_add_cmd(chip, WRITE_REG_CMD, CARD_PULL_CTL6, 0xFF, MS_D5_PD | MS_D4_PD);
- } else if (CHECK_PID(chip, 0x5288)) {
- if (CHECK_BARO_PKG(chip, QFN)) {
- rtsx_add_cmd(chip, WRITE_REG_CMD, CARD_PULL_CTL1, 0xFF, 0xA8);
- rtsx_add_cmd(chip, WRITE_REG_CMD, CARD_PULL_CTL2, 0xFF, 0x5A);
- rtsx_add_cmd(chip, WRITE_REG_CMD, CARD_PULL_CTL3, 0xFF, 0x95);
- rtsx_add_cmd(chip, WRITE_REG_CMD, CARD_PULL_CTL4, 0xFF, 0xAA);
- }
- }
-
- retval = rtsx_send_cmd(chip, SD_CARD, 100);
- if (retval < 0)
- TRACE_RET(chip, STATUS_FAIL);
-
- return STATUS_SUCCESS;
-}
-
-static int sd_init_power(struct rtsx_chip *chip)
-{
- int retval;
-
- if (CHECK_PID(chip, 0x5209))
- RTSX_WRITE_REG(chip, PWR_GATE_CTRL, LDO3318_PWR_MASK, LDO_OFF);
-
- retval = sd_power_off_card3v3(chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- if (!chip->ft2_fast_mode)
- wait_timeout(250);
-
- retval = enable_card_clock(chip, SD_CARD);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- if (chip->asic_code) {
- retval = sd_pull_ctl_enable(chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
- } else {
- RTSX_WRITE_REG(chip, FPGA_PULL_CTL, FPGA_SD_PULL_CTL_BIT | 0x20, 0);
- }
-
- if (chip->ft2_fast_mode) {
- if (CHECK_PID(chip, 0x5209))
- RTSX_WRITE_REG(chip, PWR_GATE_CTRL, LDO3318_PWR_MASK, LDO_ON);
-
- } else {
- retval = card_power_on(chip, SD_CARD);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- wait_timeout(260);
-
-#ifdef SUPPORT_OCP
- if (chip->ocp_stat & (SD_OC_NOW | SD_OC_EVER)) {
- RTSX_DEBUGP("Over current, OCPSTAT is 0x%x\n", chip->ocp_stat);
- TRACE_RET(chip, STATUS_FAIL);
- }
-#endif
- }
-
- RTSX_WRITE_REG(chip, CARD_OE, SD_OUTPUT_EN, SD_OUTPUT_EN);
-
- return STATUS_SUCCESS;
-}
-
-static int sd_dummy_clock(struct rtsx_chip *chip)
-{
- if (CHECK_PID(chip, 0x5209)) {
- RTSX_WRITE_REG(chip, SD_BUS_STAT, SD_CLK_TOGGLE_EN, SD_CLK_TOGGLE_EN);
- wait_timeout(5);
- RTSX_WRITE_REG(chip, SD_BUS_STAT, SD_CLK_TOGGLE_EN, 0x00);
- } else {
- RTSX_WRITE_REG(chip, REG_SD_CFG3, 0x01, 0x01);
- wait_timeout(5);
- RTSX_WRITE_REG(chip, REG_SD_CFG3, 0x01, 0);
- }
-
- return STATUS_SUCCESS;
-}
-
-static int sd_read_lba0(struct rtsx_chip *chip)
-{
- struct sd_info *sd_card = &(chip->sd_card);
- int retval;
- u8 cmd[5], bus_width;
-
- cmd[0] = 0x40 | READ_SINGLE_BLOCK;
- cmd[1] = 0;
- cmd[2] = 0;
- cmd[3] = 0;
- cmd[4] = 0;
-
- if (CHK_SD(sd_card)) {
- bus_width = SD_BUS_WIDTH_4;
- } else {
- if (CHK_MMC_8BIT(sd_card))
- bus_width = SD_BUS_WIDTH_8;
- else if (CHK_MMC_4BIT(sd_card))
- bus_width = SD_BUS_WIDTH_4;
- else
- bus_width = SD_BUS_WIDTH_1;
- }
-
- retval = sd_read_data(chip, SD_TM_NORMAL_READ, cmd,
- 5, 512, 1, bus_width, NULL, 0, 100);
- if (retval != STATUS_SUCCESS) {
- rtsx_clear_sd_error(chip);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- return STATUS_SUCCESS;
-}
-
-static int sd_check_wp_state(struct rtsx_chip *chip)
-{
- struct sd_info *sd_card = &(chip->sd_card);
- int retval;
- u32 val;
- u16 sd_card_type;
- u8 cmd[5], buf[64];
-
- retval = sd_send_cmd_get_rsp(chip, APP_CMD,
- sd_card->sd_addr, SD_RSP_TYPE_R1, NULL, 0);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- cmd[0] = 0x40 | SD_STATUS;
- cmd[1] = 0;
- cmd[2] = 0;
- cmd[3] = 0;
- cmd[4] = 0;
-
- retval = sd_read_data(chip, SD_TM_NORMAL_READ, cmd, 5, 64, 1, SD_BUS_WIDTH_4, buf, 64, 250);
- if (retval != STATUS_SUCCESS) {
- rtsx_clear_sd_error(chip);
-
- sd_send_cmd_get_rsp(chip, SEND_STATUS, sd_card->sd_addr, SD_RSP_TYPE_R1, NULL, 0);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- RTSX_DEBUGP("ACMD13:\n");
- RTSX_DUMP(buf, 64);
-
- sd_card_type = ((u16)buf[2] << 8) | buf[3];
- RTSX_DEBUGP("sd_card_type = 0x%04x\n", sd_card_type);
- if ((sd_card_type == 0x0001) || (sd_card_type == 0x0002)) {
- /* ROM card or OTP */
- chip->card_wp |= SD_CARD;
- }
-
- /* Check SD Machanical Write-Protect Switch */
- val = rtsx_readl(chip, RTSX_BIPR);
- if (val & SD_WRITE_PROTECT)
- chip->card_wp |= SD_CARD;
-
- return STATUS_SUCCESS;
-}
-
-static int reset_sd(struct rtsx_chip *chip)
-{
- struct sd_info *sd_card = &(chip->sd_card);
- int retval, i = 0, j = 0, k = 0, hi_cap_flow = 0;
- int sd_dont_switch = 0;
- int support_1v8 = 0;
- int try_sdio = 1;
- u8 rsp[16];
- u8 switch_bus_width;
- u32 voltage = 0;
- int sd20_mode = 0;
-
- SET_SD(sd_card);
-
-Switch_Fail:
-
- i = 0;
- j = 0;
- k = 0;
- hi_cap_flow = 0;
-
-#ifdef SUPPORT_SD_LOCK
- if (sd_card->sd_lock_status & SD_UNLOCK_POW_ON)
- goto SD_UNLOCK_ENTRY;
-#endif
-
- retval = sd_prepare_reset(chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- retval = sd_dummy_clock(chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- if (CHK_SDIO_EXIST(chip) && !CHK_SDIO_IGNORED(chip) && try_sdio) {
- int rty_cnt = 0;
-
- for (; rty_cnt < chip->sdio_retry_cnt; rty_cnt++) {
- if (detect_card_cd(chip, SD_CARD) != STATUS_SUCCESS) {
- sd_set_err_code(chip, SD_NO_CARD);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- retval = sd_send_cmd_get_rsp(chip, IO_SEND_OP_COND, 0, SD_RSP_TYPE_R4, rsp, 5);
- if (retval == STATUS_SUCCESS) {
- int func_num = (rsp[1] >> 4) & 0x07;
- if (func_num) {
- RTSX_DEBUGP("SD_IO card (Function number: %d)!\n", func_num);
- chip->sd_io = 1;
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- break;
- }
-
- sd_init_power(chip);
-
- sd_dummy_clock(chip);
- }
-
- RTSX_DEBUGP("Normal card!\n");
- }
-
- /* Start Initialization Process of SD Card */
-RTY_SD_RST:
- retval = sd_send_cmd_get_rsp(chip, GO_IDLE_STATE, 0, SD_RSP_TYPE_R0, NULL, 0);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- wait_timeout(20);
-
- retval = sd_send_cmd_get_rsp(chip, SEND_IF_COND, 0x000001AA, SD_RSP_TYPE_R7, rsp, 5);
- if (retval == STATUS_SUCCESS) {
- if ((rsp[4] == 0xAA) && ((rsp[3] & 0x0f) == 0x01)) {
- hi_cap_flow = 1;
- if (CHECK_PID(chip, 0x5209)) {
- if (sd20_mode) {
- voltage = SUPPORT_VOLTAGE |
- SUPPORT_HIGH_AND_EXTENDED_CAPACITY;
- } else {
- voltage = SUPPORT_VOLTAGE |
- SUPPORT_HIGH_AND_EXTENDED_CAPACITY |
- SUPPORT_MAX_POWER_PERMANCE | SUPPORT_1V8;
- }
- } else {
- voltage = SUPPORT_VOLTAGE | 0x40000000;
- }
- }
- }
-
- if (!hi_cap_flow) {
- voltage = SUPPORT_VOLTAGE;
-
- retval = sd_send_cmd_get_rsp(chip, GO_IDLE_STATE, 0, SD_RSP_TYPE_R0, NULL, 0);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- wait_timeout(20);
- }
-
- do {
- retval = sd_send_cmd_get_rsp(chip, APP_CMD, 0, SD_RSP_TYPE_R1, NULL, 0);
- if (retval != STATUS_SUCCESS) {
- if (detect_card_cd(chip, SD_CARD) != STATUS_SUCCESS) {
- sd_set_err_code(chip, SD_NO_CARD);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- j++;
- if (j < 3)
- goto RTY_SD_RST;
- else
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- retval = sd_send_cmd_get_rsp(chip, SD_APP_OP_COND, voltage, SD_RSP_TYPE_R3, rsp, 5);
- if (retval != STATUS_SUCCESS) {
- k++;
- if (k < 3)
- goto RTY_SD_RST;
- else
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- i++;
- wait_timeout(20);
- } while (!(rsp[1] & 0x80) && (i < 255));
-
- if (i == 255)
- TRACE_RET(chip, STATUS_FAIL);
-
- if (hi_cap_flow) {
- if (rsp[1] & 0x40)
- SET_SD_HCXC(sd_card);
- else
- CLR_SD_HCXC(sd_card);
-
- if (CHECK_PID(chip, 0x5209) && CHK_SD_HCXC(sd_card) && !sd20_mode)
- support_1v8 = (rsp[1] & 0x01) ? 1 : 0;
- else
- support_1v8 = 0;
- } else {
- CLR_SD_HCXC(sd_card);
- support_1v8 = 0;
- }
- RTSX_DEBUGP("support_1v8 = %d\n", support_1v8);
-
- if (support_1v8) {
- retval = sd_voltage_switch(chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- retval = sd_send_cmd_get_rsp(chip, ALL_SEND_CID, 0, SD_RSP_TYPE_R2, NULL, 0);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- for (i = 0; i < 3; i++) {
- retval = sd_send_cmd_get_rsp(chip, SEND_RELATIVE_ADDR, 0, SD_RSP_TYPE_R6, rsp, 5);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- sd_card->sd_addr = (u32)rsp[1] << 24;
- sd_card->sd_addr += (u32)rsp[2] << 16;
-
- if (sd_card->sd_addr)
- break;
- }
-
- retval = sd_check_csd(chip, 1);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- retval = sd_select_card(chip, 1);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
-#ifdef SUPPORT_SD_LOCK
-SD_UNLOCK_ENTRY:
- retval = sd_update_lock_status(chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- if (sd_card->sd_lock_status & SD_LOCKED) {
- sd_card->sd_lock_status |= (SD_LOCK_1BIT_MODE | SD_PWD_EXIST);
- return STATUS_SUCCESS;
- } else if (!(sd_card->sd_lock_status & SD_UNLOCK_POW_ON)) {
- sd_card->sd_lock_status &= ~SD_PWD_EXIST;
- }
-#endif
-
- retval = sd_send_cmd_get_rsp(chip, APP_CMD, sd_card->sd_addr, SD_RSP_TYPE_R1, NULL, 0);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- retval = sd_send_cmd_get_rsp(chip, SET_CLR_CARD_DETECT, 0, SD_RSP_TYPE_R1, NULL, 0);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- if (support_1v8) {
- retval = sd_send_cmd_get_rsp(chip, APP_CMD, sd_card->sd_addr, SD_RSP_TYPE_R1, NULL, 0);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- retval = sd_send_cmd_get_rsp(chip, SET_BUS_WIDTH, 2, SD_RSP_TYPE_R1, NULL, 0);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- switch_bus_width = SD_BUS_WIDTH_4;
- } else {
- switch_bus_width = SD_BUS_WIDTH_1;
- }
-
- retval = sd_send_cmd_get_rsp(chip, SET_BLOCKLEN, 0x200, SD_RSP_TYPE_R1, NULL, 0);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- retval = sd_set_clock_divider(chip, SD_CLK_DIVIDE_0);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- if (!(sd_card->raw_csd[4] & 0x40))
- sd_dont_switch = 1;
-
- if (!sd_dont_switch) {
- if (sd20_mode) {
- /* Set sd_switch_fail here, because we needn't
- * switch to UHS mode
- */
- sd_card->sd_switch_fail = SDR104_SUPPORT_MASK |
- DDR50_SUPPORT_MASK | SDR50_SUPPORT_MASK;
- }
-
- /* Check the card whether follow SD1.1 spec or higher */
- retval = sd_check_spec(chip, switch_bus_width);
- if (retval == STATUS_SUCCESS) {
- retval = sd_switch_function(chip, switch_bus_width);
- if (retval != STATUS_SUCCESS) {
- if (CHECK_PID(chip, 0x5209))
- sd_change_bank_voltage(chip, SD_IO_3V3);
-
- sd_init_power(chip);
- sd_dont_switch = 1;
- try_sdio = 0;
-
- goto Switch_Fail;
- }
- } else {
- if (support_1v8) {
- if (CHECK_PID(chip, 0x5209))
- sd_change_bank_voltage(chip, SD_IO_3V3);
-
- sd_init_power(chip);
- sd_dont_switch = 1;
- try_sdio = 0;
-
- goto Switch_Fail;
- }
- }
- }
-
- if (!support_1v8) {
- retval = sd_send_cmd_get_rsp(chip, APP_CMD, sd_card->sd_addr, SD_RSP_TYPE_R1, NULL, 0);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- retval = sd_send_cmd_get_rsp(chip, SET_BUS_WIDTH, 2, SD_RSP_TYPE_R1, NULL, 0);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
- }
-
-#ifdef SUPPORT_SD_LOCK
- sd_card->sd_lock_status &= ~SD_LOCK_1BIT_MODE;
-#endif
-
- if (!sd20_mode && CHK_SD30_SPEED(sd_card)) {
- int read_lba0 = 1;
-
- RTSX_WRITE_REG(chip, SD30_DRIVE_SEL, 0x07, chip->sd30_drive_sel_1v8);
-
- retval = sd_set_init_para(chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- if (CHK_SD_DDR50(sd_card))
- retval = sd_ddr_tuning(chip);
- else
- retval = sd_sdr_tuning(chip);
-
- if (retval != STATUS_SUCCESS) {
- if (sd20_mode) {
- TRACE_RET(chip, STATUS_FAIL);
- } else {
- retval = sd_init_power(chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- try_sdio = 0;
- sd20_mode = 1;
- goto Switch_Fail;
- }
- }
-
- sd_send_cmd_get_rsp(chip, SEND_STATUS, sd_card->sd_addr, SD_RSP_TYPE_R1, NULL, 0);
-
- if (CHK_SD_DDR50(sd_card)) {
- retval = sd_wait_state_data_ready(chip, 0x08, 1, 1000);
- if (retval != STATUS_SUCCESS)
- read_lba0 = 0;
- }
-
- if (read_lba0) {
- retval = sd_read_lba0(chip);
- if (retval != STATUS_SUCCESS) {
- if (sd20_mode) {
- TRACE_RET(chip, STATUS_FAIL);
- } else {
- retval = sd_init_power(chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- try_sdio = 0;
- sd20_mode = 1;
- goto Switch_Fail;
- }
- }
- }
- }
-
- retval = sd_check_wp_state(chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- chip->card_bus_width[chip->card2lun[SD_CARD]] = 4;
-
-#ifdef SUPPORT_SD_LOCK
- if (sd_card->sd_lock_status & SD_UNLOCK_POW_ON) {
- RTSX_WRITE_REG(chip, REG_SD_BLOCK_CNT_H, 0xFF, 0x02);
- RTSX_WRITE_REG(chip, REG_SD_BLOCK_CNT_L, 0xFF, 0x00);
- }
-#endif
-
- return STATUS_SUCCESS;
-}
-
-
-static int mmc_test_switch_bus(struct rtsx_chip *chip, u8 width)
-{
- struct sd_info *sd_card = &(chip->sd_card);
- int retval;
- u8 buf[8] = {0}, bus_width, *ptr;
- u16 byte_cnt;
- int len;
-
- retval = sd_send_cmd_get_rsp(chip, BUSTEST_W, 0, SD_RSP_TYPE_R1, NULL, 0);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, SWITCH_FAIL);
-
- if (width == MMC_8BIT_BUS) {
- buf[0] = 0x55;
- buf[1] = 0xAA;
- len = 8;
- byte_cnt = 8;
- bus_width = SD_BUS_WIDTH_8;
- } else {
- buf[0] = 0x5A;
- len = 4;
- byte_cnt = 4;
- bus_width = SD_BUS_WIDTH_4;
- }
-
- if (!CHECK_PID(chip, 0x5209)) {
- retval = rtsx_write_register(chip, REG_SD_CFG3, 0x02, 0x02);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, SWITCH_ERR);
- }
-
- retval = sd_write_data(chip, SD_TM_AUTO_WRITE_3,
- NULL, 0, byte_cnt, 1, bus_width, buf, len, 100);
- if (retval != STATUS_SUCCESS) {
- if (CHECK_PID(chip, 0x5209)) {
- u8 val1 = 0, val2 = 0;
- rtsx_read_register(chip, REG_SD_STAT1, &val1);
- rtsx_read_register(chip, REG_SD_STAT2, &val2);
- rtsx_clear_sd_error(chip);
- if ((val1 & 0xE0) || val2)
- TRACE_RET(chip, SWITCH_ERR);
- } else {
- rtsx_clear_sd_error(chip);
- rtsx_write_register(chip, REG_SD_CFG3, 0x02, 0);
- TRACE_RET(chip, SWITCH_ERR);
- }
- }
-
- if (!CHECK_PID(chip, 0x5209)) {
- retval = rtsx_write_register(chip, REG_SD_CFG3, 0x02, 0);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, SWITCH_ERR);
- }
-
- RTSX_DEBUGP("SD/MMC CMD %d\n", BUSTEST_R);
-
- rtsx_init_cmd(chip);
-
- rtsx_add_cmd(chip, WRITE_REG_CMD, REG_SD_CMD0, 0xFF, 0x40 | BUSTEST_R);
-
- if (width == MMC_8BIT_BUS)
- rtsx_add_cmd(chip, WRITE_REG_CMD, REG_SD_BYTE_CNT_L, 0xFF, 0x08);
- else
- rtsx_add_cmd(chip, WRITE_REG_CMD, REG_SD_BYTE_CNT_L, 0xFF, 0x04);
-
- rtsx_add_cmd(chip, WRITE_REG_CMD, REG_SD_BLOCK_CNT_L, 0xFF, 1);
- rtsx_add_cmd(chip, WRITE_REG_CMD, REG_SD_BLOCK_CNT_H, 0xFF, 0);
-
- rtsx_add_cmd(chip, WRITE_REG_CMD, REG_SD_CFG2, 0xFF,
- SD_CALCULATE_CRC7 | SD_NO_CHECK_CRC16 | SD_NO_WAIT_BUSY_END |
- SD_CHECK_CRC7 | SD_RSP_LEN_6);
- rtsx_add_cmd(chip, WRITE_REG_CMD, CARD_DATA_SOURCE, 0x01, PINGPONG_BUFFER);
- rtsx_add_cmd(chip, WRITE_REG_CMD, REG_SD_TRANSFER, 0xFF, SD_TM_NORMAL_READ | SD_TRANSFER_START);
- rtsx_add_cmd(chip, CHECK_REG_CMD, REG_SD_TRANSFER, SD_TRANSFER_END, SD_TRANSFER_END);
-
- rtsx_add_cmd(chip, READ_REG_CMD, PPBUF_BASE2, 0, 0);
- if (width == MMC_8BIT_BUS)
- rtsx_add_cmd(chip, READ_REG_CMD, PPBUF_BASE2 + 1, 0, 0);
-
- retval = rtsx_send_cmd(chip, SD_CARD, 100);
- if (retval < 0) {
- rtsx_clear_sd_error(chip);
- TRACE_RET(chip, SWITCH_ERR);
- }
-
- ptr = rtsx_get_cmd_data(chip) + 1;
-
- if (width == MMC_8BIT_BUS) {
- RTSX_DEBUGP("BUSTEST_R [8bits]: 0x%02x 0x%02x\n", ptr[0], ptr[1]);
- if ((ptr[0] == 0xAA) && (ptr[1] == 0x55)) {
- u8 rsp[5];
- u32 arg;
-
- if (CHK_MMC_DDR52(sd_card))
- arg = 0x03B70600;
- else
- arg = 0x03B70200;
-
- retval = sd_send_cmd_get_rsp(chip, SWITCH, arg, SD_RSP_TYPE_R1b, rsp, 5);
- if ((retval == STATUS_SUCCESS) && !(rsp[4] & MMC_SWITCH_ERR))
- return SWITCH_SUCCESS;
- }
- } else {
- RTSX_DEBUGP("BUSTEST_R [4bits]: 0x%02x\n", ptr[0]);
- if (ptr[0] == 0xA5) {
- u8 rsp[5];
- u32 arg;
-
- if (CHK_MMC_DDR52(sd_card))
- arg = 0x03B70500;
- else
- arg = 0x03B70100;
-
- retval = sd_send_cmd_get_rsp(chip, SWITCH, arg, SD_RSP_TYPE_R1b, rsp, 5);
- if ((retval == STATUS_SUCCESS) && !(rsp[4] & MMC_SWITCH_ERR))
- return SWITCH_SUCCESS;
- }
- }
-
- TRACE_RET(chip, SWITCH_FAIL);
-}
-
-
-static int mmc_switch_timing_bus(struct rtsx_chip *chip, int switch_ddr)
-{
- struct sd_info *sd_card = &(chip->sd_card);
- int retval;
- u8 *ptr, card_type, card_type_mask = 0;
-
- CLR_MMC_HS(sd_card);
-
- RTSX_DEBUGP("SD/MMC CMD %d\n", SEND_EXT_CSD);
-
- rtsx_init_cmd(chip);
-
- rtsx_add_cmd(chip, WRITE_REG_CMD, REG_SD_CMD0, 0xFF, 0x40 | SEND_EXT_CSD);
- rtsx_add_cmd(chip, WRITE_REG_CMD, REG_SD_CMD1, 0xFF, 0);
- rtsx_add_cmd(chip, WRITE_REG_CMD, REG_SD_CMD2, 0xFF, 0);
- rtsx_add_cmd(chip, WRITE_REG_CMD, REG_SD_CMD3, 0xFF, 0);
- rtsx_add_cmd(chip, WRITE_REG_CMD, REG_SD_CMD4, 0xFF, 0);
-
- rtsx_add_cmd(chip, WRITE_REG_CMD, REG_SD_BYTE_CNT_L, 0xFF, 0);
- rtsx_add_cmd(chip, WRITE_REG_CMD, REG_SD_BYTE_CNT_H, 0xFF, 2);
- rtsx_add_cmd(chip, WRITE_REG_CMD, REG_SD_BLOCK_CNT_L, 0xFF, 1);
- rtsx_add_cmd(chip, WRITE_REG_CMD, REG_SD_BLOCK_CNT_H, 0xFF, 0);
-
- rtsx_add_cmd(chip, WRITE_REG_CMD, REG_SD_CFG2, 0xFF,
- SD_CALCULATE_CRC7 | SD_CHECK_CRC16 | SD_NO_WAIT_BUSY_END |
- SD_CHECK_CRC7 | SD_RSP_LEN_6);
- rtsx_add_cmd(chip, WRITE_REG_CMD, CARD_DATA_SOURCE, 0x01, PINGPONG_BUFFER);
- rtsx_add_cmd(chip, WRITE_REG_CMD, REG_SD_TRANSFER, 0xFF, SD_TM_NORMAL_READ | SD_TRANSFER_START);
- rtsx_add_cmd(chip, CHECK_REG_CMD, REG_SD_TRANSFER, SD_TRANSFER_END, SD_TRANSFER_END);
-
- rtsx_add_cmd(chip, READ_REG_CMD, PPBUF_BASE2 + 196, 0xFF, 0);
- rtsx_add_cmd(chip, READ_REG_CMD, PPBUF_BASE2 + 212, 0xFF, 0);
- rtsx_add_cmd(chip, READ_REG_CMD, PPBUF_BASE2 + 213, 0xFF, 0);
- rtsx_add_cmd(chip, READ_REG_CMD, PPBUF_BASE2 + 214, 0xFF, 0);
- rtsx_add_cmd(chip, READ_REG_CMD, PPBUF_BASE2 + 215, 0xFF, 0);
-
- retval = rtsx_send_cmd(chip, SD_CARD, 1000);
- if (retval < 0) {
- if (retval == -ETIMEDOUT) {
- rtsx_clear_sd_error(chip);
- sd_send_cmd_get_rsp(chip, SEND_STATUS, sd_card->sd_addr,
- SD_RSP_TYPE_R1, NULL, 0);
- }
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- ptr = rtsx_get_cmd_data(chip);
- if (ptr[0] & SD_TRANSFER_ERR) {
- sd_send_cmd_get_rsp(chip, SEND_STATUS, sd_card->sd_addr, SD_RSP_TYPE_R1, NULL, 0);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- if (CHK_MMC_SECTOR_MODE(sd_card)) {
- sd_card->capacity = ((u32)ptr[5] << 24) | ((u32)ptr[4] << 16) |
- ((u32)ptr[3] << 8) | ((u32)ptr[2]);
- }
-
- if (CHECK_PID(chip, 0x5209)) {
-#ifdef SUPPORT_SD_LOCK
- if (!(sd_card->sd_lock_status & SD_SDR_RST) &&
- (chip->sd_ctl & SUPPORT_MMC_DDR_MODE)) {
- card_type_mask = 0x07;
- } else {
- card_type_mask = 0x03;
- }
-#else
- if (chip->sd_ctl & SUPPORT_MMC_DDR_MODE)
- card_type_mask = 0x07;
- else
- card_type_mask = 0x03;
-#endif
- } else {
- card_type_mask = 0x03;
- }
- card_type = ptr[1] & card_type_mask;
- if (card_type) {
- u8 rsp[5];
-
- if (card_type & 0x04) {
- if (switch_ddr)
- SET_MMC_DDR52(sd_card);
- else
- SET_MMC_52M(sd_card);
- } else if (card_type & 0x02) {
- SET_MMC_52M(sd_card);
- } else {
- SET_MMC_26M(sd_card);
- }
-
- retval = sd_send_cmd_get_rsp(chip, SWITCH,
- 0x03B90100, SD_RSP_TYPE_R1b, rsp, 5);
- if ((retval != STATUS_SUCCESS) || (rsp[4] & MMC_SWITCH_ERR))
- CLR_MMC_HS(sd_card);
- }
-
- sd_choose_proper_clock(chip);
- retval = switch_clock(chip, sd_card->sd_clock);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- /* Test Bus Procedure */
- retval = mmc_test_switch_bus(chip, MMC_8BIT_BUS);
- if (retval == SWITCH_SUCCESS) {
- SET_MMC_8BIT(sd_card);
- chip->card_bus_width[chip->card2lun[SD_CARD]] = 8;
-#ifdef SUPPORT_SD_LOCK
- sd_card->sd_lock_status &= ~SD_LOCK_1BIT_MODE;
-#endif
- } else if (retval == SWITCH_FAIL) {
- retval = mmc_test_switch_bus(chip, MMC_4BIT_BUS);
- if (retval == SWITCH_SUCCESS) {
- SET_MMC_4BIT(sd_card);
- chip->card_bus_width[chip->card2lun[SD_CARD]] = 4;
-#ifdef SUPPORT_SD_LOCK
- sd_card->sd_lock_status &= ~SD_LOCK_1BIT_MODE;
-#endif
- } else if (retval == SWITCH_FAIL) {
- CLR_MMC_8BIT(sd_card);
- CLR_MMC_4BIT(sd_card);
- } else {
- TRACE_RET(chip, STATUS_FAIL);
- }
- } else {
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- return STATUS_SUCCESS;
-}
-
-
-static int reset_mmc(struct rtsx_chip *chip)
-{
- struct sd_info *sd_card = &(chip->sd_card);
- int retval, i = 0, j = 0, k = 0;
- int switch_ddr = 1;
- u8 rsp[16];
- u8 spec_ver = 0;
- u32 temp;
-
-#ifdef SUPPORT_SD_LOCK
- if (sd_card->sd_lock_status & SD_UNLOCK_POW_ON)
- goto MMC_UNLOCK_ENTRY;
-#endif
-
-Switch_Fail:
- retval = sd_prepare_reset(chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, retval);
-
- SET_MMC(sd_card);
-
-RTY_MMC_RST:
- retval = sd_send_cmd_get_rsp(chip, GO_IDLE_STATE, 0, SD_RSP_TYPE_R0, NULL, 0);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- do {
- if (detect_card_cd(chip, SD_CARD) != STATUS_SUCCESS) {
- sd_set_err_code(chip, SD_NO_CARD);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- retval = sd_send_cmd_get_rsp(chip, SEND_OP_COND,
- (SUPPORT_VOLTAGE|0x40000000), SD_RSP_TYPE_R3, rsp, 5);
- if (retval != STATUS_SUCCESS) {
- if (sd_check_err_code(chip, SD_BUSY) || sd_check_err_code(chip, SD_TO_ERR)) {
- k++;
- if (k < 20) {
- sd_clr_err_code(chip);
- goto RTY_MMC_RST;
- } else {
- TRACE_RET(chip, STATUS_FAIL);
- }
- } else {
- j++;
- if (j < 100) {
- sd_clr_err_code(chip);
- goto RTY_MMC_RST;
- } else {
- TRACE_RET(chip, STATUS_FAIL);
- }
- }
- }
-
- wait_timeout(20);
- i++;
- } while (!(rsp[1] & 0x80) && (i < 255));
-
- if (i == 255)
- TRACE_RET(chip, STATUS_FAIL);
-
- if ((rsp[1] & 0x60) == 0x40)
- SET_MMC_SECTOR_MODE(sd_card);
- else
- CLR_MMC_SECTOR_MODE(sd_card);
-
- retval = sd_send_cmd_get_rsp(chip, ALL_SEND_CID, 0, SD_RSP_TYPE_R2, NULL, 0);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- sd_card->sd_addr = 0x00100000;
- retval = sd_send_cmd_get_rsp(chip, SET_RELATIVE_ADDR, sd_card->sd_addr, SD_RSP_TYPE_R6, rsp, 5);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- retval = sd_check_csd(chip, 1);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- spec_ver = (sd_card->raw_csd[0] & 0x3C) >> 2;
-
- retval = sd_select_card(chip, 1);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- retval = sd_send_cmd_get_rsp(chip, SET_BLOCKLEN, 0x200, SD_RSP_TYPE_R1, NULL, 0);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
-#ifdef SUPPORT_SD_LOCK
-MMC_UNLOCK_ENTRY:
- retval = sd_update_lock_status(chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-#endif
-
- retval = sd_set_clock_divider(chip, SD_CLK_DIVIDE_0);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- chip->card_bus_width[chip->card2lun[SD_CARD]] = 1;
-
- if (!sd_card->mmc_dont_switch_bus) {
- if (spec_ver == 4) {
- /* MMC 4.x Cards */
- retval = mmc_switch_timing_bus(chip, switch_ddr);
- if (retval != STATUS_SUCCESS) {
- retval = sd_init_power(chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
- sd_card->mmc_dont_switch_bus = 1;
- TRACE_GOTO(chip, Switch_Fail);
- }
- }
-
- if (CHK_MMC_SECTOR_MODE(sd_card) && (sd_card->capacity == 0))
- TRACE_RET(chip, STATUS_FAIL);
-
- if (switch_ddr && CHK_MMC_DDR52(sd_card)) {
- retval = sd_set_init_para(chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- retval = mmc_ddr_tuning(chip);
- if (retval != STATUS_SUCCESS) {
- retval = sd_init_power(chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- switch_ddr = 0;
- TRACE_GOTO(chip, Switch_Fail);
- }
-
- retval = sd_wait_state_data_ready(chip, 0x08, 1, 1000);
- if (retval == STATUS_SUCCESS) {
- retval = sd_read_lba0(chip);
- if (retval != STATUS_SUCCESS) {
- retval = sd_init_power(chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- switch_ddr = 0;
- TRACE_GOTO(chip, Switch_Fail);
- }
- }
- }
- }
-
-#ifdef SUPPORT_SD_LOCK
- if (sd_card->sd_lock_status & SD_UNLOCK_POW_ON) {
- RTSX_WRITE_REG(chip, REG_SD_BLOCK_CNT_H, 0xFF, 0x02);
- RTSX_WRITE_REG(chip, REG_SD_BLOCK_CNT_L, 0xFF, 0x00);
- }
-#endif
-
- temp = rtsx_readl(chip, RTSX_BIPR);
- if (temp & SD_WRITE_PROTECT)
- chip->card_wp |= SD_CARD;
-
- return STATUS_SUCCESS;
-}
-
-int reset_sd_card(struct rtsx_chip *chip)
-{
- struct sd_info *sd_card = &(chip->sd_card);
- int retval;
-
- sd_init_reg_addr(chip);
-
- memset(sd_card, 0, sizeof(struct sd_info));
- chip->capacity[chip->card2lun[SD_CARD]] = 0;
-
- retval = enable_card_clock(chip, SD_CARD);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- if (chip->ignore_sd && CHK_SDIO_EXIST(chip) && !CHK_SDIO_IGNORED(chip)) {
- if (chip->asic_code) {
- retval = sd_pull_ctl_enable(chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
- } else {
- retval = rtsx_write_register(chip, FPGA_PULL_CTL,
- FPGA_SD_PULL_CTL_BIT | 0x20, 0);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
- }
- retval = card_share_mode(chip, SD_CARD);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- chip->sd_io = 1;
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- retval = sd_init_power(chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- if (chip->sd_ctl & RESET_MMC_FIRST) {
- retval = reset_mmc(chip);
- if (retval != STATUS_SUCCESS) {
- if (sd_check_err_code(chip, SD_NO_CARD))
- TRACE_RET(chip, STATUS_FAIL);
-
- retval = reset_sd(chip);
- if (retval != STATUS_SUCCESS) {
- if (CHECK_PID(chip, 0x5209))
- sd_change_bank_voltage(chip, SD_IO_3V3);
-
- TRACE_RET(chip, STATUS_FAIL);
- }
- }
- } else {
- retval = reset_sd(chip);
- if (retval != STATUS_SUCCESS) {
- if (sd_check_err_code(chip, SD_NO_CARD))
- TRACE_RET(chip, STATUS_FAIL);
-
- if (CHECK_PID(chip, 0x5209)) {
- retval = sd_change_bank_voltage(chip, SD_IO_3V3);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- if (chip->sd_io) {
- TRACE_RET(chip, STATUS_FAIL);
- } else {
- retval = reset_mmc(chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
- }
- }
- }
-
- retval = sd_set_clock_divider(chip, SD_CLK_DIVIDE_0);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- RTSX_WRITE_REG(chip, REG_SD_BYTE_CNT_L, 0xFF, 0);
- RTSX_WRITE_REG(chip, REG_SD_BYTE_CNT_H, 0xFF, 2);
-
- chip->capacity[chip->card2lun[SD_CARD]] = sd_card->capacity;
-
- retval = sd_set_init_para(chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- RTSX_DEBUGP("sd_card->sd_type = 0x%x\n", sd_card->sd_type);
-
- return STATUS_SUCCESS;
-}
-
-static int reset_mmc_only(struct rtsx_chip *chip)
-{
- struct sd_info *sd_card = &(chip->sd_card);
- int retval;
-
- sd_card->sd_type = 0;
- sd_card->seq_mode = 0;
- sd_card->sd_data_buf_ready = 0;
- sd_card->capacity = 0;
- sd_card->sd_switch_fail = 0;
-
-#ifdef SUPPORT_SD_LOCK
- sd_card->sd_lock_status = 0;
- sd_card->sd_erase_status = 0;
-#endif
-
- chip->capacity[chip->card2lun[SD_CARD]] = sd_card->capacity = 0;
-
- retval = enable_card_clock(chip, SD_CARD);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- retval = sd_init_power(chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- retval = reset_mmc(chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- retval = sd_set_clock_divider(chip, SD_CLK_DIVIDE_0);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- RTSX_WRITE_REG(chip, REG_SD_BYTE_CNT_L, 0xFF, 0);
- RTSX_WRITE_REG(chip, REG_SD_BYTE_CNT_H, 0xFF, 2);
-
- chip->capacity[chip->card2lun[SD_CARD]] = sd_card->capacity;
-
- retval = sd_set_init_para(chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- RTSX_DEBUGP("In reset_mmc_only, sd_card->sd_type = 0x%x\n", sd_card->sd_type);
-
- return STATUS_SUCCESS;
-}
-
-#define WAIT_DATA_READY_RTY_CNT 255
-
-static int wait_data_buf_ready(struct rtsx_chip *chip)
-{
- struct sd_info *sd_card = &(chip->sd_card);
- int i, retval;
-
- for (i = 0; i < WAIT_DATA_READY_RTY_CNT; i++) {
- if (detect_card_cd(chip, SD_CARD) != STATUS_SUCCESS) {
- sd_set_err_code(chip, SD_NO_CARD);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- sd_card->sd_data_buf_ready = 0;
-
- retval = sd_send_cmd_get_rsp(chip, SEND_STATUS,
- sd_card->sd_addr, SD_RSP_TYPE_R1, NULL, 0);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- if (sd_card->sd_data_buf_ready) {
- return sd_send_cmd_get_rsp(chip, SEND_STATUS,
- sd_card->sd_addr, SD_RSP_TYPE_R1, NULL, 0);
- }
- }
-
- sd_set_err_code(chip, SD_TO_ERR);
-
- TRACE_RET(chip, STATUS_FAIL);
-}
-
-void sd_stop_seq_mode(struct rtsx_chip *chip)
-{
- struct sd_info *sd_card = &(chip->sd_card);
- int retval;
-
- if (sd_card->seq_mode) {
- retval = sd_switch_clock(chip);
- if (retval != STATUS_SUCCESS)
- return;
-
- retval = sd_send_cmd_get_rsp(chip, STOP_TRANSMISSION, 0,
- SD_RSP_TYPE_R1b, NULL, 0);
- if (retval != STATUS_SUCCESS)
- sd_set_err_code(chip, SD_STS_ERR);
-
- retval = sd_wait_state_data_ready(chip, 0x08, 1, 1000);
- if (retval != STATUS_SUCCESS)
- sd_set_err_code(chip, SD_STS_ERR);
-
- sd_card->seq_mode = 0;
-
- rtsx_write_register(chip, RBCTL, RB_FLUSH, RB_FLUSH);
- }
-}
-
-static inline int sd_auto_tune_clock(struct rtsx_chip *chip)
-{
- struct sd_info *sd_card = &(chip->sd_card);
- int retval;
-
- if (chip->asic_code) {
- if (sd_card->sd_clock > 30)
- sd_card->sd_clock -= 20;
- } else {
- switch (sd_card->sd_clock) {
- case CLK_200:
- sd_card->sd_clock = CLK_150;
- break;
-
- case CLK_150:
- sd_card->sd_clock = CLK_120;
- break;
-
- case CLK_120:
- sd_card->sd_clock = CLK_100;
- break;
-
- case CLK_100:
- sd_card->sd_clock = CLK_80;
- break;
-
- case CLK_80:
- sd_card->sd_clock = CLK_60;
- break;
-
- case CLK_60:
- sd_card->sd_clock = CLK_50;
- break;
-
- default:
- break;
- }
- }
-
- retval = sd_switch_clock(chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- return STATUS_SUCCESS;
-}
-
-int sd_rw(struct scsi_cmnd *srb, struct rtsx_chip *chip, u32 start_sector, u16 sector_cnt)
-{
- struct sd_info *sd_card = &(chip->sd_card);
- u32 data_addr;
- u8 cfg2;
- int retval;
-
- if (srb->sc_data_direction == DMA_FROM_DEVICE) {
- RTSX_DEBUGP("sd_rw: Read %d %s from 0x%x\n", sector_cnt,
- (sector_cnt > 1) ? "sectors" : "sector", start_sector);
- } else {
- RTSX_DEBUGP("sd_rw: Write %d %s to 0x%x\n", sector_cnt,
- (sector_cnt > 1) ? "sectors" : "sector", start_sector);
- }
-
- sd_card->cleanup_counter = 0;
-
- if (!(chip->card_ready & SD_CARD)) {
- sd_card->seq_mode = 0;
-
- retval = reset_sd_card(chip);
- if (retval == STATUS_SUCCESS) {
- chip->card_ready |= SD_CARD;
- chip->card_fail &= ~SD_CARD;
- } else {
- chip->card_ready &= ~SD_CARD;
- chip->card_fail |= SD_CARD;
- chip->capacity[chip->card2lun[SD_CARD]] = 0;
- chip->rw_need_retry = 1;
- TRACE_RET(chip, STATUS_FAIL);
- }
- }
-
- if (!CHK_SD_HCXC(sd_card) && !CHK_MMC_SECTOR_MODE(sd_card))
- data_addr = start_sector << 9;
- else
- data_addr = start_sector;
-
- sd_clr_err_code(chip);
-
- retval = sd_switch_clock(chip);
- if (retval != STATUS_SUCCESS) {
- sd_set_err_code(chip, SD_IO_ERR);
- TRACE_GOTO(chip, RW_FAIL);
- }
-
- if (sd_card->seq_mode && ((sd_card->pre_dir != srb->sc_data_direction)
- || ((sd_card->pre_sec_addr + sd_card->pre_sec_cnt) != start_sector))) {
- if ((sd_card->pre_sec_cnt < 0x80)
- && (sd_card->pre_dir == DMA_FROM_DEVICE)
- && !CHK_SD30_SPEED(sd_card)
- && !CHK_SD_HS(sd_card)
- && !CHK_MMC_HS(sd_card)) {
- sd_send_cmd_get_rsp(chip, SEND_STATUS,
- sd_card->sd_addr, SD_RSP_TYPE_R1, NULL, 0);
- }
-
- retval = sd_send_cmd_get_rsp(chip, STOP_TRANSMISSION,
- 0, SD_RSP_TYPE_R1b, NULL, 0);
- if (retval != STATUS_SUCCESS) {
- chip->rw_need_retry = 1;
- sd_set_err_code(chip, SD_STS_ERR);
- TRACE_GOTO(chip, RW_FAIL);
- }
-
- sd_card->seq_mode = 0;
-
- retval = rtsx_write_register(chip, RBCTL, RB_FLUSH, RB_FLUSH);
- if (retval != STATUS_SUCCESS) {
- sd_set_err_code(chip, SD_IO_ERR);
- TRACE_GOTO(chip, RW_FAIL);
- }
-
- if ((sd_card->pre_sec_cnt < 0x80)
- && !CHK_SD30_SPEED(sd_card)
- && !CHK_SD_HS(sd_card)
- && !CHK_MMC_HS(sd_card)) {
- sd_send_cmd_get_rsp(chip, SEND_STATUS,
- sd_card->sd_addr, SD_RSP_TYPE_R1, NULL, 0);
- }
- }
-
- rtsx_init_cmd(chip);
-
- rtsx_add_cmd(chip, WRITE_REG_CMD, REG_SD_BYTE_CNT_L, 0xFF, 0x00);
- rtsx_add_cmd(chip, WRITE_REG_CMD, REG_SD_BYTE_CNT_H, 0xFF, 0x02);
- rtsx_add_cmd(chip, WRITE_REG_CMD, REG_SD_BLOCK_CNT_L, 0xFF, (u8)sector_cnt);
- rtsx_add_cmd(chip, WRITE_REG_CMD, REG_SD_BLOCK_CNT_H, 0xFF, (u8)(sector_cnt >> 8));
-
- rtsx_add_cmd(chip, WRITE_REG_CMD, CARD_DATA_SOURCE, 0x01, RING_BUFFER);
-
- if (CHK_MMC_8BIT(sd_card))
- rtsx_add_cmd(chip, WRITE_REG_CMD, REG_SD_CFG1, 0x03, SD_BUS_WIDTH_8);
- else if (CHK_MMC_4BIT(sd_card) || CHK_SD(sd_card))
- rtsx_add_cmd(chip, WRITE_REG_CMD, REG_SD_CFG1, 0x03, SD_BUS_WIDTH_4);
- else
- rtsx_add_cmd(chip, WRITE_REG_CMD, REG_SD_CFG1, 0x03, SD_BUS_WIDTH_1);
-
- if (sd_card->seq_mode) {
- cfg2 = SD_NO_CALCULATE_CRC7 | SD_CHECK_CRC16 | SD_NO_WAIT_BUSY_END |
- SD_NO_CHECK_CRC7 | SD_RSP_LEN_0;
- if (CHECK_PID(chip, 0x5209)) {
- if (!CHK_SD30_SPEED(sd_card))
- cfg2 |= SD_NO_CHECK_WAIT_CRC_TO;
- }
- rtsx_add_cmd(chip, WRITE_REG_CMD, REG_SD_CFG2, 0xFF, cfg2);
-
- trans_dma_enable(srb->sc_data_direction, chip, sector_cnt * 512, DMA_512);
-
- if (srb->sc_data_direction == DMA_FROM_DEVICE) {
- rtsx_add_cmd(chip, WRITE_REG_CMD, REG_SD_TRANSFER, 0xFF,
- SD_TM_AUTO_READ_3 | SD_TRANSFER_START);
- } else {
- rtsx_add_cmd(chip, WRITE_REG_CMD, REG_SD_TRANSFER, 0xFF,
- SD_TM_AUTO_WRITE_3 | SD_TRANSFER_START);
- }
-
- rtsx_add_cmd(chip, CHECK_REG_CMD, REG_SD_TRANSFER, SD_TRANSFER_END, SD_TRANSFER_END);
-
- rtsx_send_cmd_no_wait(chip);
- } else {
- if (srb->sc_data_direction == DMA_FROM_DEVICE) {
- RTSX_DEBUGP("SD/MMC CMD %d\n", READ_MULTIPLE_BLOCK);
- rtsx_add_cmd(chip, WRITE_REG_CMD, REG_SD_CMD0, 0xFF,
- 0x40 | READ_MULTIPLE_BLOCK);
- rtsx_add_cmd(chip, WRITE_REG_CMD, REG_SD_CMD1, 0xFF, (u8)(data_addr >> 24));
- rtsx_add_cmd(chip, WRITE_REG_CMD, REG_SD_CMD2, 0xFF, (u8)(data_addr >> 16));
- rtsx_add_cmd(chip, WRITE_REG_CMD, REG_SD_CMD3, 0xFF, (u8)(data_addr >> 8));
- rtsx_add_cmd(chip, WRITE_REG_CMD, REG_SD_CMD4, 0xFF, (u8)data_addr);
-
- cfg2 = SD_CALCULATE_CRC7 | SD_CHECK_CRC16 | SD_NO_WAIT_BUSY_END |
- SD_CHECK_CRC7 | SD_RSP_LEN_6;
- if (CHECK_PID(chip, 0x5209)) {
- if (!CHK_SD30_SPEED(sd_card))
- cfg2 |= SD_NO_CHECK_WAIT_CRC_TO;
- }
- rtsx_add_cmd(chip, WRITE_REG_CMD, REG_SD_CFG2, 0xFF, cfg2);
-
- trans_dma_enable(srb->sc_data_direction, chip, sector_cnt * 512, DMA_512);
-
- rtsx_add_cmd(chip, WRITE_REG_CMD, REG_SD_TRANSFER, 0xFF,
- SD_TM_AUTO_READ_2 | SD_TRANSFER_START);
- rtsx_add_cmd(chip, CHECK_REG_CMD, REG_SD_TRANSFER,
- SD_TRANSFER_END, SD_TRANSFER_END);
-
- rtsx_send_cmd_no_wait(chip);
- } else {
- retval = rtsx_send_cmd(chip, SD_CARD, 50);
- if (retval < 0) {
- rtsx_clear_sd_error(chip);
-
- chip->rw_need_retry = 1;
- sd_set_err_code(chip, SD_TO_ERR);
- TRACE_GOTO(chip, RW_FAIL);
- }
-
- retval = wait_data_buf_ready(chip);
- if (retval != STATUS_SUCCESS) {
- chip->rw_need_retry = 1;
- sd_set_err_code(chip, SD_TO_ERR);
- TRACE_GOTO(chip, RW_FAIL);
- }
-
- retval = sd_send_cmd_get_rsp(chip, WRITE_MULTIPLE_BLOCK,
- data_addr, SD_RSP_TYPE_R1, NULL, 0);
- if (retval != STATUS_SUCCESS) {
- chip->rw_need_retry = 1;
- TRACE_GOTO(chip, RW_FAIL);
- }
-
- rtsx_init_cmd(chip);
-
- cfg2 = SD_NO_CALCULATE_CRC7 | SD_CHECK_CRC16 | SD_NO_WAIT_BUSY_END |
- SD_NO_CHECK_CRC7 | SD_RSP_LEN_0;
- if (CHECK_PID(chip, 0x5209)) {
- if (!CHK_SD30_SPEED(sd_card))
- cfg2 |= SD_NO_CHECK_WAIT_CRC_TO;
- }
- rtsx_add_cmd(chip, WRITE_REG_CMD, REG_SD_CFG2, 0xFF, cfg2);
-
- trans_dma_enable(srb->sc_data_direction, chip, sector_cnt * 512, DMA_512);
-
- rtsx_add_cmd(chip, WRITE_REG_CMD, REG_SD_TRANSFER, 0xFF,
- SD_TM_AUTO_WRITE_3 | SD_TRANSFER_START);
- rtsx_add_cmd(chip, CHECK_REG_CMD, REG_SD_TRANSFER,
- SD_TRANSFER_END, SD_TRANSFER_END);
-
- rtsx_send_cmd_no_wait(chip);
- }
-
- sd_card->seq_mode = 1;
- }
-
- retval = rtsx_transfer_data(chip, SD_CARD, scsi_sglist(srb), scsi_bufflen(srb),
- scsi_sg_count(srb), srb->sc_data_direction, chip->sd_timeout);
- if (retval < 0) {
- u8 stat = 0;
- int err;
-
- sd_card->seq_mode = 0;
-
- if (retval == -ETIMEDOUT)
- err = STATUS_TIMEDOUT;
- else
- err = STATUS_FAIL;
-
- rtsx_read_register(chip, REG_SD_STAT1, &stat);
- rtsx_clear_sd_error(chip);
- if (detect_card_cd(chip, SD_CARD) != STATUS_SUCCESS) {
- chip->rw_need_retry = 0;
- RTSX_DEBUGP("No card exist, exit sd_rw\n");
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- chip->rw_need_retry = 1;
-
- retval = sd_send_cmd_get_rsp(chip, STOP_TRANSMISSION, 0, SD_RSP_TYPE_R1b, NULL, 0);
- if (retval != STATUS_SUCCESS) {
- sd_set_err_code(chip, SD_STS_ERR);
- TRACE_GOTO(chip, RW_FAIL);
- }
-
- if (stat & (SD_CRC7_ERR | SD_CRC16_ERR | SD_CRC_WRITE_ERR)) {
- RTSX_DEBUGP("SD CRC error, tune clock!\n");
- sd_set_err_code(chip, SD_CRC_ERR);
- TRACE_GOTO(chip, RW_FAIL);
- }
-
- if (err == STATUS_TIMEDOUT) {
- sd_set_err_code(chip, SD_TO_ERR);
- TRACE_GOTO(chip, RW_FAIL);
- }
-
- TRACE_RET(chip, err);
- }
-
- sd_card->pre_sec_addr = start_sector;
- sd_card->pre_sec_cnt = sector_cnt;
- sd_card->pre_dir = srb->sc_data_direction;
-
- return STATUS_SUCCESS;
-
-RW_FAIL:
- sd_card->seq_mode = 0;
-
- if (detect_card_cd(chip, SD_CARD) != STATUS_SUCCESS) {
- chip->rw_need_retry = 0;
- RTSX_DEBUGP("No card exist, exit sd_rw\n");
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- if (sd_check_err_code(chip, SD_CRC_ERR)) {
- if (CHK_MMC_4BIT(sd_card) || CHK_MMC_8BIT(sd_card)) {
- sd_card->mmc_dont_switch_bus = 1;
- reset_mmc_only(chip);
- sd_card->mmc_dont_switch_bus = 0;
- } else {
- sd_card->need_retune = 1;
- sd_auto_tune_clock(chip);
- }
- } else if (sd_check_err_code(chip, SD_TO_ERR | SD_STS_ERR)) {
- retval = reset_sd_card(chip);
- if (retval != STATUS_SUCCESS) {
- chip->card_ready &= ~SD_CARD;
- chip->card_fail |= SD_CARD;
- chip->capacity[chip->card2lun[SD_CARD]] = 0;
- }
- }
-
- TRACE_RET(chip, STATUS_FAIL);
-}
-
-#ifdef SUPPORT_CPRM
-int soft_reset_sd_card(struct rtsx_chip *chip)
-{
- return reset_sd(chip);
-}
-
-int ext_sd_send_cmd_get_rsp(struct rtsx_chip *chip, u8 cmd_idx,
- u32 arg, u8 rsp_type, u8 *rsp, int rsp_len, int special_check)
-{
- int retval;
- int timeout = 100;
- u16 reg_addr;
- u8 *ptr;
- int stat_idx = 0;
- int rty_cnt = 0;
-
- RTSX_DEBUGP("EXT SD/MMC CMD %d\n", cmd_idx);
-
- if (rsp_type == SD_RSP_TYPE_R1b)
- timeout = 3000;
-
-RTY_SEND_CMD:
-
- rtsx_init_cmd(chip);
-
- rtsx_add_cmd(chip, WRITE_REG_CMD, REG_SD_CMD0, 0xFF, 0x40 | cmd_idx);
- rtsx_add_cmd(chip, WRITE_REG_CMD, REG_SD_CMD1, 0xFF, (u8)(arg >> 24));
- rtsx_add_cmd(chip, WRITE_REG_CMD, REG_SD_CMD2, 0xFF, (u8)(arg >> 16));
- rtsx_add_cmd(chip, WRITE_REG_CMD, REG_SD_CMD3, 0xFF, (u8)(arg >> 8));
- rtsx_add_cmd(chip, WRITE_REG_CMD, REG_SD_CMD4, 0xFF, (u8)arg);
-
- rtsx_add_cmd(chip, WRITE_REG_CMD, REG_SD_CFG2, 0xFF, rsp_type);
- rtsx_add_cmd(chip, WRITE_REG_CMD, CARD_DATA_SOURCE,
- 0x01, PINGPONG_BUFFER);
- rtsx_add_cmd(chip, WRITE_REG_CMD, REG_SD_TRANSFER,
- 0xFF, SD_TM_CMD_RSP | SD_TRANSFER_START);
- rtsx_add_cmd(chip, CHECK_REG_CMD, REG_SD_TRANSFER, SD_TRANSFER_END, SD_TRANSFER_END);
-
- if (rsp_type == SD_RSP_TYPE_R2) {
- for (reg_addr = PPBUF_BASE2; reg_addr < PPBUF_BASE2 + 16; reg_addr++)
- rtsx_add_cmd(chip, READ_REG_CMD, reg_addr, 0, 0);
-
- stat_idx = 17;
- } else if (rsp_type != SD_RSP_TYPE_R0) {
- for (reg_addr = REG_SD_CMD0; reg_addr <= REG_SD_CMD4; reg_addr++)
- rtsx_add_cmd(chip, READ_REG_CMD, reg_addr, 0, 0);
-
- stat_idx = 6;
- }
- rtsx_add_cmd(chip, READ_REG_CMD, REG_SD_CMD5, 0, 0);
-
- rtsx_add_cmd(chip, READ_REG_CMD, REG_SD_STAT1, 0, 0);
-
- retval = rtsx_send_cmd(chip, SD_CARD, timeout);
- if (retval < 0) {
- if (retval == -ETIMEDOUT) {
- rtsx_clear_sd_error(chip);
-
- if (rsp_type & SD_WAIT_BUSY_END) {
- retval = sd_check_data0_status(chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, retval);
- } else {
- sd_set_err_code(chip, SD_TO_ERR);
- }
- }
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- if (rsp_type == SD_RSP_TYPE_R0)
- return STATUS_SUCCESS;
-
- ptr = rtsx_get_cmd_data(chip) + 1;
-
- if ((ptr[0] & 0xC0) != 0) {
- sd_set_err_code(chip, SD_STS_ERR);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- if (!(rsp_type & SD_NO_CHECK_CRC7)) {
- if (ptr[stat_idx] & SD_CRC7_ERR) {
- if (cmd_idx == WRITE_MULTIPLE_BLOCK) {
- sd_set_err_code(chip, SD_CRC_ERR);
- TRACE_RET(chip, STATUS_FAIL);
- }
- if (rty_cnt < SD_MAX_RETRY_COUNT) {
- wait_timeout(20);
- rty_cnt++;
- goto RTY_SEND_CMD;
- } else {
- sd_set_err_code(chip, SD_CRC_ERR);
- TRACE_RET(chip, STATUS_FAIL);
- }
- }
- }
-
- if ((cmd_idx == SELECT_CARD) || (cmd_idx == APP_CMD) ||
- (cmd_idx == SEND_STATUS) || (cmd_idx == STOP_TRANSMISSION)) {
- if ((cmd_idx != STOP_TRANSMISSION) && (special_check == 0)) {
- if (ptr[1] & 0x80)
- TRACE_RET(chip, STATUS_FAIL);
- }
-#ifdef SUPPORT_SD_LOCK
- if (ptr[1] & 0x7D)
-#else
- if (ptr[1] & 0x7F)
-#endif
- {
- TRACE_RET(chip, STATUS_FAIL);
- }
- if (ptr[2] & 0xF8)
- TRACE_RET(chip, STATUS_FAIL);
-
- if (cmd_idx == SELECT_CARD) {
- if (rsp_type == SD_RSP_TYPE_R2) {
- if ((ptr[3] & 0x1E) != 0x04)
- TRACE_RET(chip, STATUS_FAIL);
-
- } else if (rsp_type == SD_RSP_TYPE_R0) {
- if ((ptr[3] & 0x1E) != 0x03)
- TRACE_RET(chip, STATUS_FAIL);
- }
- }
- }
-
- if (rsp && rsp_len)
- memcpy(rsp, ptr, rsp_len);
-
- return STATUS_SUCCESS;
-}
-
-int ext_sd_get_rsp(struct rtsx_chip *chip, int len, u8 *rsp, u8 rsp_type)
-{
- int retval, rsp_len;
- u16 reg_addr;
-
- if (rsp_type == SD_RSP_TYPE_R0)
- return STATUS_SUCCESS;
-
- rtsx_init_cmd(chip);
-
- if (rsp_type == SD_RSP_TYPE_R2) {
- for (reg_addr = PPBUF_BASE2; reg_addr < PPBUF_BASE2 + 16; reg_addr++)
- rtsx_add_cmd(chip, READ_REG_CMD, reg_addr, 0xFF, 0);
-
- rsp_len = 17;
- } else if (rsp_type != SD_RSP_TYPE_R0) {
- for (reg_addr = REG_SD_CMD0; reg_addr <= REG_SD_CMD4; reg_addr++)
- rtsx_add_cmd(chip, READ_REG_CMD, reg_addr, 0xFF, 0);
-
- rsp_len = 6;
- }
- rtsx_add_cmd(chip, READ_REG_CMD, REG_SD_CMD5, 0xFF, 0);
-
- retval = rtsx_send_cmd(chip, SD_CARD, 100);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- if (rsp) {
- int min_len = (rsp_len < len) ? rsp_len : len;
-
- memcpy(rsp, rtsx_get_cmd_data(chip), min_len);
-
- RTSX_DEBUGP("min_len = %d\n", min_len);
- RTSX_DEBUGP("Response in cmd buf: 0x%x 0x%x 0x%x 0x%x\n",
- rsp[0], rsp[1], rsp[2], rsp[3]);
- }
-
- return STATUS_SUCCESS;
-}
-
-int sd_pass_thru_mode(struct scsi_cmnd *srb, struct rtsx_chip *chip)
-{
- struct sd_info *sd_card = &(chip->sd_card);
- unsigned int lun = SCSI_LUN(srb);
- int len;
- u8 buf[18] = {
- 0x00,
- 0x00,
- 0x00,
- 0x0E,
- 0x00,
- 0x00,
- 0x00,
- 0x00,
- 0x53,
- 0x44,
- 0x20,
- 0x43,
- 0x61,
- 0x72,
- 0x64,
- 0x00,
- 0x00,
- 0x00,
- };
-
- sd_card->pre_cmd_err = 0;
-
- if (!(CHK_BIT(chip->lun_mc, lun))) {
- SET_BIT(chip->lun_mc, lun);
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_CHANGE);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
-
- if ((0x53 != srb->cmnd[2]) || (0x44 != srb->cmnd[3]) || (0x20 != srb->cmnd[4]) ||
- (0x43 != srb->cmnd[5]) || (0x61 != srb->cmnd[6]) ||
- (0x72 != srb->cmnd[7]) || (0x64 != srb->cmnd[8])) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
-
- switch (srb->cmnd[1] & 0x0F) {
- case 0:
- sd_card->sd_pass_thru_en = 0;
- break;
-
- case 1:
- sd_card->sd_pass_thru_en = 1;
- break;
-
- default:
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
-
- buf[5] = (1 == CHK_SD(sd_card)) ? 0x01 : 0x02;
- if (chip->card_wp & SD_CARD)
- buf[5] |= 0x80;
-
- buf[6] = (u8)(sd_card->sd_addr >> 16);
- buf[7] = (u8)(sd_card->sd_addr >> 24);
-
- buf[15] = chip->max_lun;
-
- len = min(18, (int)scsi_bufflen(srb));
- rtsx_stor_set_xfer_buf(buf, len, srb);
-
- return TRANSPORT_GOOD;
-}
-
-static inline int get_rsp_type(struct scsi_cmnd *srb, u8 *rsp_type, int *rsp_len)
-{
- if (!rsp_type || !rsp_len)
- return STATUS_FAIL;
-
- switch (srb->cmnd[10]) {
- case 0x03:
- *rsp_type = SD_RSP_TYPE_R0;
- *rsp_len = 0;
- break;
-
- case 0x04:
- *rsp_type = SD_RSP_TYPE_R1;
- *rsp_len = 6;
- break;
-
- case 0x05:
- *rsp_type = SD_RSP_TYPE_R1b;
- *rsp_len = 6;
- break;
-
- case 0x06:
- *rsp_type = SD_RSP_TYPE_R2;
- *rsp_len = 17;
- break;
-
- case 0x07:
- *rsp_type = SD_RSP_TYPE_R3;
- *rsp_len = 6;
- break;
-
- default:
- return STATUS_FAIL;
- }
-
- return STATUS_SUCCESS;
-}
-
-int sd_execute_no_data(struct scsi_cmnd *srb, struct rtsx_chip *chip)
-{
- struct sd_info *sd_card = &(chip->sd_card);
- unsigned int lun = SCSI_LUN(srb);
- int retval, rsp_len;
- u8 cmd_idx, rsp_type;
- u8 standby = 0, acmd = 0;
- u32 arg;
-
- if (!sd_card->sd_pass_thru_en) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
-
- retval = sd_switch_clock(chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, TRANSPORT_FAILED);
-
- if (sd_card->pre_cmd_err) {
- sd_card->pre_cmd_err = 0;
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_CHANGE);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
-
- cmd_idx = srb->cmnd[2] & 0x3F;
- if (srb->cmnd[1] & 0x02)
- standby = 1;
-
- if (srb->cmnd[1] & 0x01)
- acmd = 1;
-
- arg = ((u32)srb->cmnd[3] << 24) | ((u32)srb->cmnd[4] << 16) |
- ((u32)srb->cmnd[5] << 8) | srb->cmnd[6];
-
- retval = get_rsp_type(srb, &rsp_type, &rsp_len);
- if (retval != STATUS_SUCCESS) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
- sd_card->last_rsp_type = rsp_type;
-
- retval = sd_switch_clock(chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, TRANSPORT_FAILED);
-
-#ifdef SUPPORT_SD_LOCK
- if ((sd_card->sd_lock_status & SD_LOCK_1BIT_MODE) == 0) {
- if (CHK_MMC_8BIT(sd_card)) {
- retval = rtsx_write_register(chip, REG_SD_CFG1, 0x03, SD_BUS_WIDTH_8);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, TRANSPORT_FAILED);
-
- } else if (CHK_SD(sd_card) || CHK_MMC_4BIT(sd_card)) {
- retval = rtsx_write_register(chip, REG_SD_CFG1, 0x03, SD_BUS_WIDTH_4);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
- }
-#else
- retval = rtsx_write_register(chip, REG_SD_CFG1, 0x03, SD_BUS_WIDTH_4);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, TRANSPORT_FAILED);
-#endif
-
- if (standby) {
- retval = sd_select_card(chip, 0);
- if (retval != STATUS_SUCCESS)
- TRACE_GOTO(chip, SD_Execute_Cmd_Failed);
- }
-
- if (acmd) {
- retval = ext_sd_send_cmd_get_rsp(chip, APP_CMD, sd_card->sd_addr,
- SD_RSP_TYPE_R1, NULL, 0, 0);
- if (retval != STATUS_SUCCESS)
- TRACE_GOTO(chip, SD_Execute_Cmd_Failed);
- }
-
- retval = ext_sd_send_cmd_get_rsp(chip, cmd_idx, arg, rsp_type,
- sd_card->rsp, rsp_len, 0);
- if (retval != STATUS_SUCCESS)
- TRACE_GOTO(chip, SD_Execute_Cmd_Failed);
-
- if (standby) {
- retval = sd_select_card(chip, 1);
- if (retval != STATUS_SUCCESS)
- TRACE_GOTO(chip, SD_Execute_Cmd_Failed);
- }
-
-#ifdef SUPPORT_SD_LOCK
- retval = sd_update_lock_status(chip);
- if (retval != STATUS_SUCCESS)
- TRACE_GOTO(chip, SD_Execute_Cmd_Failed);
-#endif
-
- scsi_set_resid(srb, 0);
- return TRANSPORT_GOOD;
-
-SD_Execute_Cmd_Failed:
- sd_card->pre_cmd_err = 1;
- set_sense_type(chip, lun, SENSE_TYPE_NO_SENSE);
- release_sd_card(chip);
- do_reset_sd_card(chip);
- if (!(chip->card_ready & SD_CARD))
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_NOT_PRESENT);
-
- TRACE_RET(chip, TRANSPORT_FAILED);
-}
-
-int sd_execute_read_data(struct scsi_cmnd *srb, struct rtsx_chip *chip)
-{
- struct sd_info *sd_card = &(chip->sd_card);
- unsigned int lun = SCSI_LUN(srb);
- int retval, rsp_len, i;
- int cmd13_checkbit = 0, read_err = 0;
- u8 cmd_idx, rsp_type, bus_width;
- u8 send_cmd12 = 0, standby = 0, acmd = 0;
- u32 data_len;
-
- if (!sd_card->sd_pass_thru_en) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
-
- if (sd_card->pre_cmd_err) {
- sd_card->pre_cmd_err = 0;
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_CHANGE);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
-
- retval = sd_switch_clock(chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, TRANSPORT_FAILED);
-
- cmd_idx = srb->cmnd[2] & 0x3F;
- if (srb->cmnd[1] & 0x04)
- send_cmd12 = 1;
-
- if (srb->cmnd[1] & 0x02)
- standby = 1;
-
- if (srb->cmnd[1] & 0x01)
- acmd = 1;
-
- data_len = ((u32)srb->cmnd[7] << 16) | ((u32)srb->cmnd[8] << 8) | srb->cmnd[9];
-
- retval = get_rsp_type(srb, &rsp_type, &rsp_len);
- if (retval != STATUS_SUCCESS) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
- sd_card->last_rsp_type = rsp_type;
-
- retval = sd_switch_clock(chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, TRANSPORT_FAILED);
-
-#ifdef SUPPORT_SD_LOCK
- if ((sd_card->sd_lock_status & SD_LOCK_1BIT_MODE) == 0) {
- if (CHK_MMC_8BIT(sd_card))
- bus_width = SD_BUS_WIDTH_8;
- else if (CHK_SD(sd_card) || CHK_MMC_4BIT(sd_card))
- bus_width = SD_BUS_WIDTH_4;
- else
- bus_width = SD_BUS_WIDTH_1;
- } else {
- bus_width = SD_BUS_WIDTH_4;
- }
- RTSX_DEBUGP("bus_width = %d\n", bus_width);
-#else
- bus_width = SD_BUS_WIDTH_4;
-#endif
-
- if (data_len < 512) {
- retval = ext_sd_send_cmd_get_rsp(chip, SET_BLOCKLEN, data_len,
- SD_RSP_TYPE_R1, NULL, 0, 0);
- if (retval != STATUS_SUCCESS)
- TRACE_GOTO(chip, SD_Execute_Read_Cmd_Failed);
- }
-
- if (standby) {
- retval = sd_select_card(chip, 0);
- if (retval != STATUS_SUCCESS)
- TRACE_GOTO(chip, SD_Execute_Read_Cmd_Failed);
- }
-
- if (acmd) {
- retval = ext_sd_send_cmd_get_rsp(chip, APP_CMD, sd_card->sd_addr,
- SD_RSP_TYPE_R1, NULL, 0, 0);
- if (retval != STATUS_SUCCESS)
- TRACE_GOTO(chip, SD_Execute_Read_Cmd_Failed);
- }
-
- if (data_len <= 512) {
- int min_len;
- u8 *buf;
- u16 byte_cnt, blk_cnt;
- u8 cmd[5];
-
- byte_cnt = ((u16)(srb->cmnd[8] & 0x03) << 8) | srb->cmnd[9];
- blk_cnt = 1;
-
- cmd[0] = 0x40 | cmd_idx;
- cmd[1] = srb->cmnd[3];
- cmd[2] = srb->cmnd[4];
- cmd[3] = srb->cmnd[5];
- cmd[4] = srb->cmnd[6];
-
- buf = kmalloc(data_len, GFP_KERNEL);
- if (buf == NULL)
- TRACE_RET(chip, TRANSPORT_ERROR);
-
- retval = sd_read_data(chip, SD_TM_NORMAL_READ, cmd, 5, byte_cnt,
- blk_cnt, bus_width, buf, data_len, 2000);
- if (retval != STATUS_SUCCESS) {
- read_err = 1;
- kfree(buf);
- rtsx_clear_sd_error(chip);
- TRACE_GOTO(chip, SD_Execute_Read_Cmd_Failed);
- }
-
- min_len = min(data_len, scsi_bufflen(srb));
- rtsx_stor_set_xfer_buf(buf, min_len, srb);
-
- kfree(buf);
- } else if (!(data_len & 0x1FF)) {
- rtsx_init_cmd(chip);
-
- trans_dma_enable(DMA_FROM_DEVICE, chip, data_len, DMA_512);
-
- rtsx_add_cmd(chip, WRITE_REG_CMD, REG_SD_BYTE_CNT_H, 0xFF, 0x02);
- rtsx_add_cmd(chip, WRITE_REG_CMD, REG_SD_BYTE_CNT_L, 0xFF, 0x00);
- rtsx_add_cmd(chip, WRITE_REG_CMD, REG_SD_BLOCK_CNT_H,
- 0xFF, (srb->cmnd[7] & 0xFE) >> 1);
- rtsx_add_cmd(chip, WRITE_REG_CMD, REG_SD_BLOCK_CNT_L,
- 0xFF, (u8)((data_len & 0x0001FE00) >> 9));
-
- rtsx_add_cmd(chip, WRITE_REG_CMD, REG_SD_CMD0, 0xFF, 0x40 | cmd_idx);
- rtsx_add_cmd(chip, WRITE_REG_CMD, REG_SD_CMD1, 0xFF, srb->cmnd[3]);
- rtsx_add_cmd(chip, WRITE_REG_CMD, REG_SD_CMD2, 0xFF, srb->cmnd[4]);
- rtsx_add_cmd(chip, WRITE_REG_CMD, REG_SD_CMD3, 0xFF, srb->cmnd[5]);
- rtsx_add_cmd(chip, WRITE_REG_CMD, REG_SD_CMD4, 0xFF, srb->cmnd[6]);
-
- rtsx_add_cmd(chip, WRITE_REG_CMD, REG_SD_CFG1, 0x03, bus_width);
- rtsx_add_cmd(chip, WRITE_REG_CMD, REG_SD_CFG2, 0xFF, rsp_type);
-
- rtsx_add_cmd(chip, WRITE_REG_CMD, REG_SD_TRANSFER,
- 0xFF, SD_TM_AUTO_READ_2 | SD_TRANSFER_START);
- rtsx_add_cmd(chip, CHECK_REG_CMD, REG_SD_TRANSFER, SD_TRANSFER_END, SD_TRANSFER_END);
-
- rtsx_send_cmd_no_wait(chip);
-
- retval = rtsx_transfer_data(chip, SD_CARD, scsi_sglist(srb), scsi_bufflen(srb),
- scsi_sg_count(srb), DMA_FROM_DEVICE, 10000);
- if (retval < 0) {
- read_err = 1;
- rtsx_clear_sd_error(chip);
- TRACE_GOTO(chip, SD_Execute_Read_Cmd_Failed);
- }
-
- } else {
- TRACE_GOTO(chip, SD_Execute_Read_Cmd_Failed);
- }
-
- retval = ext_sd_get_rsp(chip, rsp_len, sd_card->rsp, rsp_type);
- if (retval != STATUS_SUCCESS)
- TRACE_GOTO(chip, SD_Execute_Read_Cmd_Failed);
-
- if (standby) {
- retval = sd_select_card(chip, 1);
- if (retval != STATUS_SUCCESS)
- TRACE_GOTO(chip, SD_Execute_Read_Cmd_Failed);
- }
-
- if (send_cmd12) {
- retval = ext_sd_send_cmd_get_rsp(chip, STOP_TRANSMISSION,
- 0, SD_RSP_TYPE_R1b, NULL, 0, 0);
- if (retval != STATUS_SUCCESS)
- TRACE_GOTO(chip, SD_Execute_Read_Cmd_Failed);
- }
-
- if (data_len < 512) {
- retval = ext_sd_send_cmd_get_rsp(chip, SET_BLOCKLEN, 0x200,
- SD_RSP_TYPE_R1, NULL, 0, 0);
- if (retval != STATUS_SUCCESS)
- TRACE_GOTO(chip, SD_Execute_Read_Cmd_Failed);
-
- retval = rtsx_write_register(chip, SD_BYTE_CNT_H, 0xFF, 0x02);
- if (retval != STATUS_SUCCESS)
- TRACE_GOTO(chip, SD_Execute_Read_Cmd_Failed);
-
- retval = rtsx_write_register(chip, SD_BYTE_CNT_L, 0xFF, 0x00);
- if (retval != STATUS_SUCCESS)
- TRACE_GOTO(chip, SD_Execute_Read_Cmd_Failed);
- }
-
- if ((srb->cmnd[1] & 0x02) || (srb->cmnd[1] & 0x04))
- cmd13_checkbit = 1;
-
- for (i = 0; i < 3; i++) {
- retval = ext_sd_send_cmd_get_rsp(chip, SEND_STATUS, sd_card->sd_addr,
- SD_RSP_TYPE_R1, NULL, 0, cmd13_checkbit);
- if (retval == STATUS_SUCCESS)
- break;
- }
- if (retval != STATUS_SUCCESS)
- TRACE_GOTO(chip, SD_Execute_Read_Cmd_Failed);
-
- scsi_set_resid(srb, 0);
- return TRANSPORT_GOOD;
-
-SD_Execute_Read_Cmd_Failed:
- sd_card->pre_cmd_err = 1;
- set_sense_type(chip, lun, SENSE_TYPE_NO_SENSE);
- if (read_err)
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_UNRECOVER_READ_ERR);
-
- release_sd_card(chip);
- do_reset_sd_card(chip);
- if (!(chip->card_ready & SD_CARD))
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_NOT_PRESENT);
-
- TRACE_RET(chip, TRANSPORT_FAILED);
-}
-
-int sd_execute_write_data(struct scsi_cmnd *srb, struct rtsx_chip *chip)
-{
- struct sd_info *sd_card = &(chip->sd_card);
- unsigned int lun = SCSI_LUN(srb);
- int retval, rsp_len, i;
- int cmd13_checkbit = 0, write_err = 0;
- u8 cmd_idx, rsp_type;
- u8 send_cmd12 = 0, standby = 0, acmd = 0;
- u32 data_len, arg;
-#ifdef SUPPORT_SD_LOCK
- int lock_cmd_fail = 0;
- u8 sd_lock_state = 0;
- u8 lock_cmd_type = 0;
-#endif
-
- if (!sd_card->sd_pass_thru_en) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
-
- if (sd_card->pre_cmd_err) {
- sd_card->pre_cmd_err = 0;
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_CHANGE);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
-
- retval = sd_switch_clock(chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, TRANSPORT_FAILED);
-
- cmd_idx = srb->cmnd[2] & 0x3F;
- if (srb->cmnd[1] & 0x04)
- send_cmd12 = 1;
-
- if (srb->cmnd[1] & 0x02)
- standby = 1;
-
- if (srb->cmnd[1] & 0x01)
- acmd = 1;
-
- data_len = ((u32)srb->cmnd[7] << 16) | ((u32)srb->cmnd[8] << 8) | srb->cmnd[9];
- arg = ((u32)srb->cmnd[3] << 24) | ((u32)srb->cmnd[4] << 16) |
- ((u32)srb->cmnd[5] << 8) | srb->cmnd[6];
-
-#ifdef SUPPORT_SD_LOCK
- if (cmd_idx == LOCK_UNLOCK) {
- sd_lock_state = sd_card->sd_lock_status;
- sd_lock_state &= SD_LOCKED;
- }
-#endif
-
- retval = get_rsp_type(srb, &rsp_type, &rsp_len);
- if (retval != STATUS_SUCCESS) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
- sd_card->last_rsp_type = rsp_type;
-
- retval = sd_switch_clock(chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, TRANSPORT_FAILED);
-
-#ifdef SUPPORT_SD_LOCK
- if ((sd_card->sd_lock_status & SD_LOCK_1BIT_MODE) == 0) {
- if (CHK_MMC_8BIT(sd_card)) {
- retval = rtsx_write_register(chip, REG_SD_CFG1, 0x03, SD_BUS_WIDTH_8);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, TRANSPORT_FAILED);
-
- } else if (CHK_SD(sd_card) || CHK_MMC_4BIT(sd_card)) {
- retval = rtsx_write_register(chip, REG_SD_CFG1, 0x03, SD_BUS_WIDTH_4);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
- }
-#else
- retval = rtsx_write_register(chip, REG_SD_CFG1, 0x03, SD_BUS_WIDTH_4);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, TRANSPORT_FAILED);
-#endif
-
- if (data_len < 512) {
- retval = ext_sd_send_cmd_get_rsp(chip, SET_BLOCKLEN, data_len,
- SD_RSP_TYPE_R1, NULL, 0, 0);
- if (retval != STATUS_SUCCESS)
- TRACE_GOTO(chip, SD_Execute_Write_Cmd_Failed);
- }
-
- if (standby) {
- retval = sd_select_card(chip, 0);
- if (retval != STATUS_SUCCESS)
- TRACE_GOTO(chip, SD_Execute_Write_Cmd_Failed);
- }
-
- if (acmd) {
- retval = ext_sd_send_cmd_get_rsp(chip, APP_CMD, sd_card->sd_addr,
- SD_RSP_TYPE_R1, NULL, 0, 0);
- if (retval != STATUS_SUCCESS)
- TRACE_GOTO(chip, SD_Execute_Write_Cmd_Failed);
- }
-
- retval = ext_sd_send_cmd_get_rsp(chip, cmd_idx, arg, rsp_type,
- sd_card->rsp, rsp_len, 0);
- if (retval != STATUS_SUCCESS)
- TRACE_GOTO(chip, SD_Execute_Write_Cmd_Failed);
-
- if (data_len <= 512) {
- u16 i;
- u8 *buf;
-
- buf = kmalloc(data_len, GFP_KERNEL);
- if (buf == NULL)
- TRACE_RET(chip, TRANSPORT_ERROR);
-
- rtsx_stor_get_xfer_buf(buf, data_len, srb);
-
-#ifdef SUPPORT_SD_LOCK
- if (cmd_idx == LOCK_UNLOCK)
- lock_cmd_type = buf[0] & 0x0F;
-#endif
-
- if (data_len > 256) {
- rtsx_init_cmd(chip);
- for (i = 0; i < 256; i++) {
- rtsx_add_cmd(chip, WRITE_REG_CMD,
- PPBUF_BASE2 + i, 0xFF, buf[i]);
- }
- retval = rtsx_send_cmd(chip, 0, 250);
- if (retval != STATUS_SUCCESS) {
- kfree(buf);
- TRACE_GOTO(chip, SD_Execute_Write_Cmd_Failed);
- }
-
- rtsx_init_cmd(chip);
- for (i = 256; i < data_len; i++) {
- rtsx_add_cmd(chip, WRITE_REG_CMD,
- PPBUF_BASE2 + i, 0xFF, buf[i]);
- }
- retval = rtsx_send_cmd(chip, 0, 250);
- if (retval != STATUS_SUCCESS) {
- kfree(buf);
- TRACE_GOTO(chip, SD_Execute_Write_Cmd_Failed);
- }
- } else {
- rtsx_init_cmd(chip);
- for (i = 0; i < data_len; i++) {
- rtsx_add_cmd(chip, WRITE_REG_CMD,
- PPBUF_BASE2 + i, 0xFF, buf[i]);
- }
- retval = rtsx_send_cmd(chip, 0, 250);
- if (retval != STATUS_SUCCESS) {
- kfree(buf);
- TRACE_GOTO(chip, SD_Execute_Write_Cmd_Failed);
- }
- }
-
- kfree(buf);
-
- rtsx_init_cmd(chip);
-
- rtsx_add_cmd(chip, WRITE_REG_CMD, REG_SD_BYTE_CNT_H, 0xFF, srb->cmnd[8] & 0x03);
- rtsx_add_cmd(chip, WRITE_REG_CMD, REG_SD_BYTE_CNT_L, 0xFF, srb->cmnd[9]);
- rtsx_add_cmd(chip, WRITE_REG_CMD, REG_SD_BLOCK_CNT_H, 0xFF, 0x00);
- rtsx_add_cmd(chip, WRITE_REG_CMD, REG_SD_BLOCK_CNT_L, 0xFF, 0x01);
- rtsx_add_cmd(chip, WRITE_REG_CMD, CARD_DATA_SOURCE, 0x01, PINGPONG_BUFFER);
-
- rtsx_add_cmd(chip, WRITE_REG_CMD, REG_SD_TRANSFER, 0xFF,
- SD_TM_AUTO_WRITE_3 | SD_TRANSFER_START);
- rtsx_add_cmd(chip, CHECK_REG_CMD, REG_SD_TRANSFER, SD_TRANSFER_END, SD_TRANSFER_END);
-
- retval = rtsx_send_cmd(chip, SD_CARD, 250);
- } else if (!(data_len & 0x1FF)) {
- rtsx_init_cmd(chip);
-
- trans_dma_enable(DMA_TO_DEVICE, chip, data_len, DMA_512);
-
- rtsx_add_cmd(chip, WRITE_REG_CMD, REG_SD_BYTE_CNT_H, 0xFF, 0x02);
- rtsx_add_cmd(chip, WRITE_REG_CMD, REG_SD_BYTE_CNT_L, 0xFF, 0x00);
- rtsx_add_cmd(chip, WRITE_REG_CMD, REG_SD_BLOCK_CNT_H,
- 0xFF, (srb->cmnd[7] & 0xFE) >> 1);
- rtsx_add_cmd(chip, WRITE_REG_CMD, REG_SD_BLOCK_CNT_L,
- 0xFF, (u8)((data_len & 0x0001FE00) >> 9));
-
- rtsx_add_cmd(chip, WRITE_REG_CMD, REG_SD_TRANSFER, 0xFF, SD_TM_AUTO_WRITE_3 | SD_TRANSFER_START);
- rtsx_add_cmd(chip, CHECK_REG_CMD, REG_SD_TRANSFER, SD_TRANSFER_END, SD_TRANSFER_END);
-
- rtsx_send_cmd_no_wait(chip);
-
- retval = rtsx_transfer_data(chip, SD_CARD, scsi_sglist(srb), scsi_bufflen(srb),
- scsi_sg_count(srb), DMA_TO_DEVICE, 10000);
-
- } else {
- TRACE_GOTO(chip, SD_Execute_Write_Cmd_Failed);
- }
-
- if (retval < 0) {
- write_err = 1;
- rtsx_clear_sd_error(chip);
- TRACE_GOTO(chip, SD_Execute_Write_Cmd_Failed);
- }
-
-#ifdef SUPPORT_SD_LOCK
- if (cmd_idx == LOCK_UNLOCK) {
- if (lock_cmd_type == SD_ERASE) {
- sd_card->sd_erase_status = SD_UNDER_ERASING;
- scsi_set_resid(srb, 0);
- return TRANSPORT_GOOD;
- }
-
- rtsx_init_cmd(chip);
- if (CHECK_PID(chip, 0x5209))
- rtsx_add_cmd(chip, CHECK_REG_CMD, SD_BUS_STAT, SD_DAT0_STATUS, SD_DAT0_STATUS);
- else
- rtsx_add_cmd(chip, CHECK_REG_CMD, 0xFD30, 0x02, 0x02);
-
- rtsx_send_cmd(chip, SD_CARD, 250);
-
- retval = sd_update_lock_status(chip);
- if (retval != STATUS_SUCCESS) {
- RTSX_DEBUGP("Lock command fail!\n");
- lock_cmd_fail = 1;
- }
- }
-#endif /* SUPPORT_SD_LOCK */
-
- if (standby) {
- retval = sd_select_card(chip, 1);
- if (retval != STATUS_SUCCESS)
- TRACE_GOTO(chip, SD_Execute_Write_Cmd_Failed);
- }
-
- if (send_cmd12) {
- retval = ext_sd_send_cmd_get_rsp(chip, STOP_TRANSMISSION,
- 0, SD_RSP_TYPE_R1b, NULL, 0, 0);
- if (retval != STATUS_SUCCESS)
- TRACE_GOTO(chip, SD_Execute_Write_Cmd_Failed);
- }
-
- if (data_len < 512) {
- retval = ext_sd_send_cmd_get_rsp(chip, SET_BLOCKLEN, 0x200,
- SD_RSP_TYPE_R1, NULL, 0, 0);
- if (retval != STATUS_SUCCESS)
- TRACE_GOTO(chip, SD_Execute_Write_Cmd_Failed);
-
- retval = rtsx_write_register(chip, SD_BYTE_CNT_H, 0xFF, 0x02);
- if (retval != STATUS_SUCCESS)
- TRACE_GOTO(chip, SD_Execute_Write_Cmd_Failed);
-
- rtsx_write_register(chip, SD_BYTE_CNT_L, 0xFF, 0x00);
- if (retval != STATUS_SUCCESS)
- TRACE_GOTO(chip, SD_Execute_Write_Cmd_Failed);
- }
-
- if ((srb->cmnd[1] & 0x02) || (srb->cmnd[1] & 0x04))
- cmd13_checkbit = 1;
-
- for (i = 0; i < 3; i++) {
- retval = ext_sd_send_cmd_get_rsp(chip, SEND_STATUS, sd_card->sd_addr,
- SD_RSP_TYPE_R1, NULL, 0, cmd13_checkbit);
- if (retval == STATUS_SUCCESS)
- break;
- }
- if (retval != STATUS_SUCCESS)
- TRACE_GOTO(chip, SD_Execute_Write_Cmd_Failed);
-
-#ifdef SUPPORT_SD_LOCK
- if (cmd_idx == LOCK_UNLOCK) {
- if (!lock_cmd_fail) {
- RTSX_DEBUGP("lock_cmd_type = 0x%x\n", lock_cmd_type);
- if (lock_cmd_type & SD_CLR_PWD)
- sd_card->sd_lock_status &= ~SD_PWD_EXIST;
-
- if (lock_cmd_type & SD_SET_PWD)
- sd_card->sd_lock_status |= SD_PWD_EXIST;
- }
-
- RTSX_DEBUGP("sd_lock_state = 0x%x, sd_card->sd_lock_status = 0x%x\n",
- sd_lock_state, sd_card->sd_lock_status);
- if (sd_lock_state ^ (sd_card->sd_lock_status & SD_LOCKED)) {
- sd_card->sd_lock_notify = 1;
- if (sd_lock_state) {
- if (sd_card->sd_lock_status & SD_LOCK_1BIT_MODE) {
- sd_card->sd_lock_status |= (SD_UNLOCK_POW_ON | SD_SDR_RST);
- if (CHK_SD(sd_card)) {
- retval = reset_sd(chip);
- if (retval != STATUS_SUCCESS) {
- sd_card->sd_lock_status &= ~(SD_UNLOCK_POW_ON | SD_SDR_RST);
- TRACE_GOTO(chip, SD_Execute_Write_Cmd_Failed);
- }
- }
-
- sd_card->sd_lock_status &= ~(SD_UNLOCK_POW_ON | SD_SDR_RST);
- }
- }
- }
- }
-
- if (lock_cmd_fail) {
- scsi_set_resid(srb, 0);
- set_sense_type(chip, lun, SENSE_TYPE_NO_SENSE);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
-#endif /* SUPPORT_SD_LOCK */
-
- scsi_set_resid(srb, 0);
- return TRANSPORT_GOOD;
-
-SD_Execute_Write_Cmd_Failed:
- sd_card->pre_cmd_err = 1;
- set_sense_type(chip, lun, SENSE_TYPE_NO_SENSE);
- if (write_err)
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_WRITE_ERR);
-
- release_sd_card(chip);
- do_reset_sd_card(chip);
- if (!(chip->card_ready & SD_CARD))
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_NOT_PRESENT);
-
- TRACE_RET(chip, TRANSPORT_FAILED);
-}
-
-int sd_get_cmd_rsp(struct scsi_cmnd *srb, struct rtsx_chip *chip)
-{
- struct sd_info *sd_card = &(chip->sd_card);
- unsigned int lun = SCSI_LUN(srb);
- int count;
- u16 data_len;
-
- if (!sd_card->sd_pass_thru_en) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
-
- if (sd_card->pre_cmd_err) {
- sd_card->pre_cmd_err = 0;
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_CHANGE);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
-
- data_len = ((u16)srb->cmnd[7] << 8) | srb->cmnd[8];
-
- if (sd_card->last_rsp_type == SD_RSP_TYPE_R0) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
- TRACE_RET(chip, TRANSPORT_FAILED);
- } else if (sd_card->last_rsp_type == SD_RSP_TYPE_R2) {
- count = (data_len < 17) ? data_len : 17;
- } else {
- count = (data_len < 6) ? data_len : 6;
- }
- rtsx_stor_set_xfer_buf(sd_card->rsp, count, srb);
-
- RTSX_DEBUGP("Response length: %d\n", data_len);
- RTSX_DEBUGP("Response: 0x%x 0x%x 0x%x 0x%x\n",
- sd_card->rsp[0], sd_card->rsp[1], sd_card->rsp[2], sd_card->rsp[3]);
-
- scsi_set_resid(srb, 0);
- return TRANSPORT_GOOD;
-}
-
-int sd_hw_rst(struct scsi_cmnd *srb, struct rtsx_chip *chip)
-{
- struct sd_info *sd_card = &(chip->sd_card);
- unsigned int lun = SCSI_LUN(srb);
- int retval;
-
- if (!sd_card->sd_pass_thru_en) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
-
- if (sd_card->pre_cmd_err) {
- sd_card->pre_cmd_err = 0;
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_CHANGE);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
-
- if ((0x53 != srb->cmnd[2]) || (0x44 != srb->cmnd[3]) || (0x20 != srb->cmnd[4]) ||
- (0x43 != srb->cmnd[5]) || (0x61 != srb->cmnd[6]) ||
- (0x72 != srb->cmnd[7]) || (0x64 != srb->cmnd[8])) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
-
- switch (srb->cmnd[1] & 0x0F) {
- case 0:
-#ifdef SUPPORT_SD_LOCK
- if (0x64 == srb->cmnd[9])
- sd_card->sd_lock_status |= SD_SDR_RST;
-#endif
- retval = reset_sd_card(chip);
- if (retval != STATUS_SUCCESS) {
-#ifdef SUPPORT_SD_LOCK
- sd_card->sd_lock_status &= ~SD_SDR_RST;
-#endif
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_NOT_PRESENT);
- sd_card->pre_cmd_err = 1;
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
-#ifdef SUPPORT_SD_LOCK
- sd_card->sd_lock_status &= ~SD_SDR_RST;
-#endif
- break;
-
- case 1:
- retval = soft_reset_sd_card(chip);
- if (retval != STATUS_SUCCESS) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_NOT_PRESENT);
- sd_card->pre_cmd_err = 1;
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
- break;
-
- default:
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_INVALID_CMD_FIELD);
- TRACE_RET(chip, TRANSPORT_FAILED);
- }
-
- scsi_set_resid(srb, 0);
- return TRANSPORT_GOOD;
-}
-#endif
-
-void sd_cleanup_work(struct rtsx_chip *chip)
-{
- struct sd_info *sd_card = &(chip->sd_card);
-
- if (sd_card->seq_mode) {
- RTSX_DEBUGP("SD: stop transmission\n");
- sd_stop_seq_mode(chip);
- sd_card->cleanup_counter = 0;
- }
-}
-
-int sd_power_off_card3v3(struct rtsx_chip *chip)
-{
- int retval;
-
- retval = disable_card_clock(chip, SD_CARD);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- RTSX_WRITE_REG(chip, CARD_OE, SD_OUTPUT_EN, 0);
-
- if (!chip->ft2_fast_mode) {
- retval = card_power_off(chip, SD_CARD);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- wait_timeout(50);
- }
-
- if (chip->asic_code) {
- retval = sd_pull_ctl_disable(chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
- } else {
- RTSX_WRITE_REG(chip, FPGA_PULL_CTL,
- FPGA_SD_PULL_CTL_BIT | 0x20, FPGA_SD_PULL_CTL_BIT);
- }
-
- return STATUS_SUCCESS;
-}
-
-int release_sd_card(struct rtsx_chip *chip)
-{
- struct sd_info *sd_card = &(chip->sd_card);
- int retval;
-
- RTSX_DEBUGP("release_sd_card\n");
-
- chip->card_ready &= ~SD_CARD;
- chip->card_fail &= ~SD_CARD;
- chip->card_wp &= ~SD_CARD;
-
- chip->sd_io = 0;
- chip->sd_int = 0;
-
-#ifdef SUPPORT_SD_LOCK
- sd_card->sd_lock_status = 0;
- sd_card->sd_erase_status = 0;
-#endif
-
- memset(sd_card->raw_csd, 0, 16);
- memset(sd_card->raw_scr, 0, 8);
-
- retval = sd_power_off_card3v3(chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- if (CHECK_PID(chip, 0x5209)) {
- retval = sd_change_bank_voltage(chip, SD_IO_3V3);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- if (CHK_SD30_SPEED(sd_card))
- RTSX_WRITE_REG(chip, SD30_DRIVE_SEL, 0x07, chip->sd30_drive_sel_3v3);
-
- RTSX_WRITE_REG(chip, OCPPARA2, SD_OCP_THD_MASK, chip->sd_400mA_ocp_thd);
- }
-
- return STATUS_SUCCESS;
-}
diff --git a/drivers/staging/rts_pstor/sd.h b/drivers/staging/rts_pstor/sd.h
deleted file mode 100644
index 1df1aa7..0000000
--- a/drivers/staging/rts_pstor/sd.h
+++ /dev/null
@@ -1,300 +0,0 @@
-/* Driver for Realtek PCI-Express card reader
- * Header file
- *
- * Copyright(c) 2009 Realtek Semiconductor Corp. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, see <http://www.gnu.org/licenses/>.
- *
- * Author:
- * wwang (wei_wang@realsil.com.cn)
- * No. 450, Shenhu Road, Suzhou Industry Park, Suzhou, China
- */
-
-#ifndef __REALTEK_RTSX_SD_H
-#define __REALTEK_RTSX_SD_H
-
-#include "rtsx_chip.h"
-
-#define SUPPORT_VOLTAGE 0x003C0000
-
-/* Error Code */
-#define SD_NO_ERROR 0x0
-#define SD_CRC_ERR 0x80
-#define SD_TO_ERR 0x40
-#define SD_NO_CARD 0x20
-#define SD_BUSY 0x10
-#define SD_STS_ERR 0x08
-#define SD_RSP_TIMEOUT 0x04
-#define SD_IO_ERR 0x02
-
-/* Return code for MMC switch bus */
-#define SWITCH_SUCCESS 0
-#define SWITCH_ERR 1
-#define SWITCH_FAIL 2
-
-/* MMC/SD Command Index */
-/* Basic command (class 0) */
-#define GO_IDLE_STATE 0
-#define SEND_OP_COND 1
-#define ALL_SEND_CID 2
-#define SET_RELATIVE_ADDR 3
-#define SEND_RELATIVE_ADDR 3
-#define SET_DSR 4
-#define IO_SEND_OP_COND 5
-#define SWITCH 6
-#define SELECT_CARD 7
-#define DESELECT_CARD 7
-/* CMD8 is "SEND_EXT_CSD" for MMC4.x Spec
- * while is "SEND_IF_COND" for SD 2.0
- */
-#define SEND_EXT_CSD 8
-#define SEND_IF_COND 8
-
-#define SEND_CSD 9
-#define SEND_CID 10
-#define VOLTAGE_SWITCH 11
-#define READ_DAT_UTIL_STOP 11
-#define STOP_TRANSMISSION 12
-#define SEND_STATUS 13
-#define GO_INACTIVE_STATE 15
-
-#define SET_BLOCKLEN 16
-#define READ_SINGLE_BLOCK 17
-#define READ_MULTIPLE_BLOCK 18
-#define SEND_TUNING_PATTERN 19
-
-#define BUSTEST_R 14
-#define BUSTEST_W 19
-
-#define WRITE_BLOCK 24
-#define WRITE_MULTIPLE_BLOCK 25
-#define PROGRAM_CSD 27
-
-#define ERASE_WR_BLK_START 32
-#define ERASE_WR_BLK_END 33
-#define ERASE_CMD 38
-
-#define LOCK_UNLOCK 42
-#define IO_RW_DIRECT 52
-
-#define APP_CMD 55
-#define GEN_CMD 56
-
-#define SET_BUS_WIDTH 6
-#define SD_STATUS 13
-#define SEND_NUM_WR_BLOCKS 22
-#define SET_WR_BLK_ERASE_COUNT 23
-#define SD_APP_OP_COND 41
-#define SET_CLR_CARD_DETECT 42
-#define SEND_SCR 51
-
-#define SD_READ_COMPLETE 0x00
-#define SD_READ_TO 0x01
-#define SD_READ_ADVENCE 0x02
-
-#define SD_CHECK_MODE 0x00
-#define SD_SWITCH_MODE 0x80
-#define SD_FUNC_GROUP_1 0x01
-#define SD_FUNC_GROUP_2 0x02
-#define SD_FUNC_GROUP_3 0x03
-#define SD_FUNC_GROUP_4 0x04
-#define SD_CHECK_SPEC_V1_1 0xFF
-
-#define NO_ARGUMENT 0x00
-#define CHECK_PATTERN 0x000000AA
-#define VOLTAGE_SUPPLY_RANGE 0x00000100
-#define SUPPORT_HIGH_AND_EXTENDED_CAPACITY 0x40000000
-#define SUPPORT_MAX_POWER_PERMANCE 0x10000000
-#define SUPPORT_1V8 0x01000000
-
-#define SWTICH_NO_ERR 0x00
-#define CARD_NOT_EXIST 0x01
-#define SPEC_NOT_SUPPORT 0x02
-#define CHECK_MODE_ERR 0x03
-#define CHECK_NOT_READY 0x04
-#define SWITCH_CRC_ERR 0x05
-#define SWITCH_MODE_ERR 0x06
-#define SWITCH_PASS 0x07
-
-#ifdef SUPPORT_SD_LOCK
-#define SD_ERASE 0x08
-#define SD_LOCK 0x04
-#define SD_UNLOCK 0x00
-#define SD_CLR_PWD 0x02
-#define SD_SET_PWD 0x01
-
-#define SD_PWD_LEN 0x10
-
-#define SD_LOCKED 0x80
-#define SD_LOCK_1BIT_MODE 0x40
-#define SD_PWD_EXIST 0x20
-#define SD_UNLOCK_POW_ON 0x01
-#define SD_SDR_RST 0x02
-
-#define SD_NOT_ERASE 0x00
-#define SD_UNDER_ERASING 0x01
-#define SD_COMPLETE_ERASE 0x02
-
-#define SD_RW_FORBIDDEN 0x0F
-
-#endif
-
-#define HS_SUPPORT 0x01
-#define SDR50_SUPPORT 0x02
-#define SDR104_SUPPORT 0x03
-#define DDR50_SUPPORT 0x04
-
-#define HS_SUPPORT_MASK 0x02
-#define SDR50_SUPPORT_MASK 0x04
-#define SDR104_SUPPORT_MASK 0x08
-#define DDR50_SUPPORT_MASK 0x10
-
-#define HS_QUERY_SWITCH_OK 0x01
-#define SDR50_QUERY_SWITCH_OK 0x02
-#define SDR104_QUERY_SWITCH_OK 0x03
-#define DDR50_QUERY_SWITCH_OK 0x04
-
-#define HS_SWITCH_BUSY 0x02
-#define SDR50_SWITCH_BUSY 0x04
-#define SDR104_SWITCH_BUSY 0x08
-#define DDR50_SWITCH_BUSY 0x10
-
-#define FUNCTION_GROUP1_SUPPORT_OFFSET 0x0D
-#define FUNCTION_GROUP1_QUERY_SWITCH_OFFSET 0x10
-#define FUNCTION_GROUP1_CHECK_BUSY_OFFSET 0x1D
-
-#define DRIVING_TYPE_A 0x01
-#define DRIVING_TYPE_B 0x00
-#define DRIVING_TYPE_C 0x02
-#define DRIVING_TYPE_D 0x03
-
-#define DRIVING_TYPE_A_MASK 0x02
-#define DRIVING_TYPE_B_MASK 0x01
-#define DRIVING_TYPE_C_MASK 0x04
-#define DRIVING_TYPE_D_MASK 0x08
-
-#define TYPE_A_QUERY_SWITCH_OK 0x01
-#define TYPE_B_QUERY_SWITCH_OK 0x00
-#define TYPE_C_QUERY_SWITCH_OK 0x02
-#define TYPE_D_QUERY_SWITCH_OK 0x03
-
-#define TYPE_A_SWITCH_BUSY 0x02
-#define TYPE_B_SWITCH_BUSY 0x01
-#define TYPE_C_SWITCH_BUSY 0x04
-#define TYPE_D_SWITCH_BUSY 0x08
-
-#define FUNCTION_GROUP3_SUPPORT_OFFSET 0x09
-#define FUNCTION_GROUP3_QUERY_SWITCH_OFFSET 0x0F
-#define FUNCTION_GROUP3_CHECK_BUSY_OFFSET 0x19
-
-#define CURRENT_LIMIT_200 0x00
-#define CURRENT_LIMIT_400 0x01
-#define CURRENT_LIMIT_600 0x02
-#define CURRENT_LIMIT_800 0x03
-
-#define CURRENT_LIMIT_200_MASK 0x01
-#define CURRENT_LIMIT_400_MASK 0x02
-#define CURRENT_LIMIT_600_MASK 0x04
-#define CURRENT_LIMIT_800_MASK 0x08
-
-#define CURRENT_LIMIT_200_QUERY_SWITCH_OK 0x00
-#define CURRENT_LIMIT_400_QUERY_SWITCH_OK 0x01
-#define CURRENT_LIMIT_600_QUERY_SWITCH_OK 0x02
-#define CURRENT_LIMIT_800_QUERY_SWITCH_OK 0x03
-
-#define CURRENT_LIMIT_200_SWITCH_BUSY 0x01
-#define CURRENT_LIMIT_400_SWITCH_BUSY 0x02
-#define CURRENT_LIMIT_600_SWITCH_BUSY 0x04
-#define CURRENT_LIMIT_800_SWITCH_BUSY 0x08
-
-#define FUNCTION_GROUP4_SUPPORT_OFFSET 0x07
-#define FUNCTION_GROUP4_QUERY_SWITCH_OFFSET 0x0F
-#define FUNCTION_GROUP4_CHECK_BUSY_OFFSET 0x17
-
-#define DATA_STRUCTURE_VER_OFFSET 0x11
-
-#define MAX_PHASE 31
-
-#define MMC_8BIT_BUS 0x0010
-#define MMC_4BIT_BUS 0x0020
-
-#define MMC_SWITCH_ERR 0x80
-
-#define SD_IO_3V3 0
-#define SD_IO_1V8 1
-
-#define TUNE_TX 0x00
-#define TUNE_RX 0x01
-
-#define CHANGE_TX 0x00
-#define CHANGE_RX 0x01
-
-#define DCM_HIGH_FREQUENCY_MODE 0x00
-#define DCM_LOW_FREQUENCY_MODE 0x01
-
-#define DCM_HIGH_FREQUENCY_MODE_SET 0x0C
-#define DCM_Low_FREQUENCY_MODE_SET 0x00
-
-#define MULTIPLY_BY_1 0x00
-#define MULTIPLY_BY_2 0x01
-#define MULTIPLY_BY_3 0x02
-#define MULTIPLY_BY_4 0x03
-#define MULTIPLY_BY_5 0x04
-#define MULTIPLY_BY_6 0x05
-#define MULTIPLY_BY_7 0x06
-#define MULTIPLY_BY_8 0x07
-#define MULTIPLY_BY_9 0x08
-#define MULTIPLY_BY_10 0x09
-
-#define DIVIDE_BY_2 0x01
-#define DIVIDE_BY_3 0x02
-#define DIVIDE_BY_4 0x03
-#define DIVIDE_BY_5 0x04
-#define DIVIDE_BY_6 0x05
-#define DIVIDE_BY_7 0x06
-#define DIVIDE_BY_8 0x07
-#define DIVIDE_BY_9 0x08
-#define DIVIDE_BY_10 0x09
-
-struct timing_phase_path {
- int start;
- int end;
- int mid;
- int len;
-};
-
-int sd_select_card(struct rtsx_chip *chip, int select);
-int sd_pull_ctl_enable(struct rtsx_chip *chip);
-int reset_sd_card(struct rtsx_chip *chip);
-int sd_switch_clock(struct rtsx_chip *chip);
-void sd_stop_seq_mode(struct rtsx_chip *chip);
-int sd_rw(struct scsi_cmnd *srb, struct rtsx_chip *chip, u32 start_sector, u16 sector_cnt);
-void sd_cleanup_work(struct rtsx_chip *chip);
-int sd_power_off_card3v3(struct rtsx_chip *chip);
-int release_sd_card(struct rtsx_chip *chip);
-#ifdef SUPPORT_CPRM
-int soft_reset_sd_card(struct rtsx_chip *chip);
-int ext_sd_send_cmd_get_rsp(struct rtsx_chip *chip, u8 cmd_idx,
- u32 arg, u8 rsp_type, u8 *rsp, int rsp_len, int special_check);
-int ext_sd_get_rsp(struct rtsx_chip *chip, int len, u8 *rsp, u8 rsp_type);
-
-int sd_pass_thru_mode(struct scsi_cmnd *srb, struct rtsx_chip *chip);
-int sd_execute_no_data(struct scsi_cmnd *srb, struct rtsx_chip *chip);
-int sd_execute_read_data(struct scsi_cmnd *srb, struct rtsx_chip *chip);
-int sd_execute_write_data(struct scsi_cmnd *srb, struct rtsx_chip *chip);
-int sd_get_cmd_rsp(struct scsi_cmnd *srb, struct rtsx_chip *chip);
-int sd_hw_rst(struct scsi_cmnd *srb, struct rtsx_chip *chip);
-#endif
-
-#endif /* __REALTEK_RTSX_SD_H */
diff --git a/drivers/staging/rts_pstor/spi.c b/drivers/staging/rts_pstor/spi.c
deleted file mode 100644
index 6b36cc5..0000000
--- a/drivers/staging/rts_pstor/spi.c
+++ /dev/null
@@ -1,812 +0,0 @@
-/* Driver for Realtek PCI-Express card reader
- *
- * Copyright(c) 2009 Realtek Semiconductor Corp. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, see <http://www.gnu.org/licenses/>.
- *
- * Author:
- * wwang (wei_wang@realsil.com.cn)
- * No. 450, Shenhu Road, Suzhou Industry Park, Suzhou, China
- */
-
-#include <linux/blkdev.h>
-#include <linux/kthread.h>
-#include <linux/sched.h>
-
-#include "rtsx.h"
-#include "rtsx_transport.h"
-#include "rtsx_scsi.h"
-#include "rtsx_card.h"
-#include "spi.h"
-
-static inline void spi_set_err_code(struct rtsx_chip *chip, u8 err_code)
-{
- struct spi_info *spi = &(chip->spi);
-
- spi->err_code = err_code;
-}
-
-static int spi_init(struct rtsx_chip *chip)
-{
- RTSX_WRITE_REG(chip, SPI_CONTROL, 0xFF,
- CS_POLARITY_LOW | DTO_MSB_FIRST | SPI_MASTER | SPI_MODE0 | SPI_AUTO);
- RTSX_WRITE_REG(chip, SPI_TCTL, EDO_TIMING_MASK, SAMPLE_DELAY_HALF);
-
- return STATUS_SUCCESS;
-}
-
-static int spi_set_init_para(struct rtsx_chip *chip)
-{
- struct spi_info *spi = &(chip->spi);
- int retval;
-
- RTSX_WRITE_REG(chip, SPI_CLK_DIVIDER1, 0xFF, (u8)(spi->clk_div >> 8));
- RTSX_WRITE_REG(chip, SPI_CLK_DIVIDER0, 0xFF, (u8)(spi->clk_div));
-
- retval = switch_clock(chip, spi->spi_clock);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- retval = select_card(chip, SPI_CARD);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- RTSX_WRITE_REG(chip, CARD_CLK_EN, SPI_CLK_EN, SPI_CLK_EN);
- RTSX_WRITE_REG(chip, CARD_OE, SPI_OUTPUT_EN, SPI_OUTPUT_EN);
-
- wait_timeout(10);
-
- retval = spi_init(chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- return STATUS_SUCCESS;
-}
-
-static int sf_polling_status(struct rtsx_chip *chip, int msec)
-{
- int retval;
-
- rtsx_init_cmd(chip);
-
- rtsx_add_cmd(chip, WRITE_REG_CMD, SPI_COMMAND, 0xFF, SPI_RDSR);
- rtsx_add_cmd(chip, WRITE_REG_CMD, SPI_TRANSFER0, 0xFF, SPI_TRANSFER0_START | SPI_POLLING_MODE0);
- rtsx_add_cmd(chip, CHECK_REG_CMD, SPI_TRANSFER0, SPI_TRANSFER0_END, SPI_TRANSFER0_END);
-
- retval = rtsx_send_cmd(chip, 0, msec);
- if (retval < 0) {
- rtsx_clear_spi_error(chip);
- spi_set_err_code(chip, SPI_BUSY_ERR);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- return STATUS_SUCCESS;
-}
-
-static int sf_enable_write(struct rtsx_chip *chip, u8 ins)
-{
- struct spi_info *spi = &(chip->spi);
- int retval;
-
- if (!spi->write_en)
- return STATUS_SUCCESS;
-
- rtsx_init_cmd(chip);
-
- rtsx_add_cmd(chip, WRITE_REG_CMD, SPI_COMMAND, 0xFF, ins);
- rtsx_add_cmd(chip, WRITE_REG_CMD, SPI_CA_NUMBER, 0xFF, SPI_COMMAND_BIT_8 | SPI_ADDRESS_BIT_24);
- rtsx_add_cmd(chip, WRITE_REG_CMD, SPI_TRANSFER0, 0xFF, SPI_TRANSFER0_START | SPI_C_MODE0);
- rtsx_add_cmd(chip, CHECK_REG_CMD, SPI_TRANSFER0, SPI_TRANSFER0_END, SPI_TRANSFER0_END);
-
- retval = rtsx_send_cmd(chip, 0, 100);
- if (retval < 0) {
- rtsx_clear_spi_error(chip);
- spi_set_err_code(chip, SPI_HW_ERR);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- return STATUS_SUCCESS;
-}
-
-static int sf_disable_write(struct rtsx_chip *chip, u8 ins)
-{
- struct spi_info *spi = &(chip->spi);
- int retval;
-
- if (!spi->write_en)
- return STATUS_SUCCESS;
-
- rtsx_init_cmd(chip);
-
- rtsx_add_cmd(chip, WRITE_REG_CMD, SPI_COMMAND, 0xFF, ins);
- rtsx_add_cmd(chip, WRITE_REG_CMD, SPI_CA_NUMBER, 0xFF, SPI_COMMAND_BIT_8 | SPI_ADDRESS_BIT_24);
- rtsx_add_cmd(chip, WRITE_REG_CMD, SPI_TRANSFER0, 0xFF, SPI_TRANSFER0_START | SPI_C_MODE0);
- rtsx_add_cmd(chip, CHECK_REG_CMD, SPI_TRANSFER0, SPI_TRANSFER0_END, SPI_TRANSFER0_END);
-
- retval = rtsx_send_cmd(chip, 0, 100);
- if (retval < 0) {
- rtsx_clear_spi_error(chip);
- spi_set_err_code(chip, SPI_HW_ERR);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- return STATUS_SUCCESS;
-}
-
-static void sf_program(struct rtsx_chip *chip, u8 ins, u8 addr_mode, u32 addr, u16 len)
-{
- rtsx_add_cmd(chip, WRITE_REG_CMD, SPI_COMMAND, 0xFF, ins);
- rtsx_add_cmd(chip, WRITE_REG_CMD, SPI_CA_NUMBER, 0xFF, SPI_COMMAND_BIT_8 | SPI_ADDRESS_BIT_24);
- rtsx_add_cmd(chip, WRITE_REG_CMD, SPI_LENGTH0, 0xFF, (u8)len);
- rtsx_add_cmd(chip, WRITE_REG_CMD, SPI_LENGTH1, 0xFF, (u8)(len >> 8));
- if (addr_mode) {
- rtsx_add_cmd(chip, WRITE_REG_CMD, SPI_ADDR0, 0xFF, (u8)addr);
- rtsx_add_cmd(chip, WRITE_REG_CMD, SPI_ADDR1, 0xFF, (u8)(addr >> 8));
- rtsx_add_cmd(chip, WRITE_REG_CMD, SPI_ADDR2, 0xFF, (u8)(addr >> 16));
- rtsx_add_cmd(chip, WRITE_REG_CMD, SPI_TRANSFER0, 0xFF, SPI_TRANSFER0_START | SPI_CADO_MODE0);
- } else {
- rtsx_add_cmd(chip, WRITE_REG_CMD, SPI_TRANSFER0, 0xFF, SPI_TRANSFER0_START | SPI_CDO_MODE0);
- }
- rtsx_add_cmd(chip, CHECK_REG_CMD, SPI_TRANSFER0, SPI_TRANSFER0_END, SPI_TRANSFER0_END);
-}
-
-static int sf_erase(struct rtsx_chip *chip, u8 ins, u8 addr_mode, u32 addr)
-{
- int retval;
-
- rtsx_init_cmd(chip);
-
- rtsx_add_cmd(chip, WRITE_REG_CMD, SPI_COMMAND, 0xFF, ins);
- rtsx_add_cmd(chip, WRITE_REG_CMD, SPI_CA_NUMBER, 0xFF, SPI_COMMAND_BIT_8 | SPI_ADDRESS_BIT_24);
- if (addr_mode) {
- rtsx_add_cmd(chip, WRITE_REG_CMD, SPI_ADDR0, 0xFF, (u8)addr);
- rtsx_add_cmd(chip, WRITE_REG_CMD, SPI_ADDR1, 0xFF, (u8)(addr >> 8));
- rtsx_add_cmd(chip, WRITE_REG_CMD, SPI_ADDR2, 0xFF, (u8)(addr >> 16));
- rtsx_add_cmd(chip, WRITE_REG_CMD, SPI_TRANSFER0, 0xFF, SPI_TRANSFER0_START | SPI_CA_MODE0);
- } else {
- rtsx_add_cmd(chip, WRITE_REG_CMD, SPI_TRANSFER0, 0xFF, SPI_TRANSFER0_START | SPI_C_MODE0);
- }
- rtsx_add_cmd(chip, CHECK_REG_CMD, SPI_TRANSFER0, SPI_TRANSFER0_END, SPI_TRANSFER0_END);
-
- retval = rtsx_send_cmd(chip, 0, 100);
- if (retval < 0) {
- rtsx_clear_spi_error(chip);
- spi_set_err_code(chip, SPI_HW_ERR);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- return STATUS_SUCCESS;
-}
-
-static int spi_init_eeprom(struct rtsx_chip *chip)
-{
- int retval;
- int clk;
-
- if (chip->asic_code)
- clk = 30;
- else
- clk = CLK_30;
-
- RTSX_WRITE_REG(chip, SPI_CLK_DIVIDER1, 0xFF, 0x00);
- RTSX_WRITE_REG(chip, SPI_CLK_DIVIDER0, 0xFF, 0x27);
-
- retval = switch_clock(chip, clk);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- retval = select_card(chip, SPI_CARD);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- RTSX_WRITE_REG(chip, CARD_CLK_EN, SPI_CLK_EN, SPI_CLK_EN);
- RTSX_WRITE_REG(chip, CARD_OE, SPI_OUTPUT_EN, SPI_OUTPUT_EN);
-
- wait_timeout(10);
-
- RTSX_WRITE_REG(chip, SPI_CONTROL, 0xFF, CS_POLARITY_HIGH | SPI_EEPROM_AUTO);
- RTSX_WRITE_REG(chip, SPI_TCTL, EDO_TIMING_MASK, SAMPLE_DELAY_HALF);
-
- return STATUS_SUCCESS;
-}
-
-static int spi_eeprom_program_enable(struct rtsx_chip *chip)
-{
- int retval;
-
- rtsx_init_cmd(chip);
-
- rtsx_add_cmd(chip, WRITE_REG_CMD, SPI_CA_NUMBER, 0xFF, 0x86);
- rtsx_add_cmd(chip, WRITE_REG_CMD, SPI_COMMAND, 0xFF, 0x13);
- rtsx_add_cmd(chip, WRITE_REG_CMD, SPI_TRANSFER0, 0xFF, SPI_TRANSFER0_START | SPI_CA_MODE0);
- rtsx_add_cmd(chip, CHECK_REG_CMD, SPI_TRANSFER0, SPI_TRANSFER0_END, SPI_TRANSFER0_END);
-
- retval = rtsx_send_cmd(chip, 0, 100);
- if (retval < 0)
- TRACE_RET(chip, STATUS_FAIL);
-
- return STATUS_SUCCESS;
-}
-
-int spi_erase_eeprom_chip(struct rtsx_chip *chip)
-{
- int retval;
-
- retval = spi_init_eeprom(chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- retval = spi_eeprom_program_enable(chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- rtsx_init_cmd(chip);
-
- rtsx_add_cmd(chip, WRITE_REG_CMD, CARD_GPIO_DIR, 0x01, 0);
- rtsx_add_cmd(chip, WRITE_REG_CMD, CARD_DATA_SOURCE, 0x01, RING_BUFFER);
- rtsx_add_cmd(chip, WRITE_REG_CMD, SPI_COMMAND, 0xFF, 0x12);
- rtsx_add_cmd(chip, WRITE_REG_CMD, SPI_CA_NUMBER, 0xFF, 0x84);
- rtsx_add_cmd(chip, WRITE_REG_CMD, SPI_TRANSFER0, 0xFF, SPI_TRANSFER0_START | SPI_CA_MODE0);
- rtsx_add_cmd(chip, CHECK_REG_CMD, SPI_TRANSFER0, SPI_TRANSFER0_END, SPI_TRANSFER0_END);
-
- retval = rtsx_send_cmd(chip, 0, 100);
- if (retval < 0)
- TRACE_RET(chip, STATUS_FAIL);
-
- RTSX_WRITE_REG(chip, CARD_GPIO_DIR, 0x01, 0x01);
-
- return STATUS_SUCCESS;
-}
-
-int spi_erase_eeprom_byte(struct rtsx_chip *chip, u16 addr)
-{
- int retval;
-
- retval = spi_init_eeprom(chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- retval = spi_eeprom_program_enable(chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- rtsx_init_cmd(chip);
-
- rtsx_add_cmd(chip, WRITE_REG_CMD, CARD_GPIO_DIR, 0x01, 0);
- rtsx_add_cmd(chip, WRITE_REG_CMD, CARD_DATA_SOURCE, 0x01, RING_BUFFER);
- rtsx_add_cmd(chip, WRITE_REG_CMD, SPI_COMMAND, 0xFF, 0x07);
- rtsx_add_cmd(chip, WRITE_REG_CMD, SPI_ADDR0, 0xFF, (u8)addr);
- rtsx_add_cmd(chip, WRITE_REG_CMD, SPI_ADDR1, 0xFF, (u8)(addr >> 8));
- rtsx_add_cmd(chip, WRITE_REG_CMD, SPI_CA_NUMBER, 0xFF, 0x46);
- rtsx_add_cmd(chip, WRITE_REG_CMD, SPI_TRANSFER0, 0xFF, SPI_TRANSFER0_START | SPI_CA_MODE0);
- rtsx_add_cmd(chip, CHECK_REG_CMD, SPI_TRANSFER0, SPI_TRANSFER0_END, SPI_TRANSFER0_END);
-
- retval = rtsx_send_cmd(chip, 0, 100);
- if (retval < 0)
- TRACE_RET(chip, STATUS_FAIL);
-
- RTSX_WRITE_REG(chip, CARD_GPIO_DIR, 0x01, 0x01);
-
- return STATUS_SUCCESS;
-}
-
-
-int spi_read_eeprom(struct rtsx_chip *chip, u16 addr, u8 *val)
-{
- int retval;
- u8 data;
-
- retval = spi_init_eeprom(chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- rtsx_init_cmd(chip);
-
- rtsx_add_cmd(chip, WRITE_REG_CMD, CARD_GPIO_DIR, 0x01, 0);
- rtsx_add_cmd(chip, WRITE_REG_CMD, CARD_DATA_SOURCE, 0x01, RING_BUFFER);
- rtsx_add_cmd(chip, WRITE_REG_CMD, SPI_COMMAND, 0xFF, 0x06);
- rtsx_add_cmd(chip, WRITE_REG_CMD, SPI_ADDR0, 0xFF, (u8)addr);
- rtsx_add_cmd(chip, WRITE_REG_CMD, SPI_ADDR1, 0xFF, (u8)(addr >> 8));
- rtsx_add_cmd(chip, WRITE_REG_CMD, SPI_CA_NUMBER, 0xFF, 0x46);
- rtsx_add_cmd(chip, WRITE_REG_CMD, SPI_LENGTH0, 0xFF, 1);
- rtsx_add_cmd(chip, WRITE_REG_CMD, SPI_TRANSFER0, 0xFF, SPI_TRANSFER0_START | SPI_CADI_MODE0);
- rtsx_add_cmd(chip, CHECK_REG_CMD, SPI_TRANSFER0, SPI_TRANSFER0_END, SPI_TRANSFER0_END);
-
- retval = rtsx_send_cmd(chip, 0, 100);
- if (retval < 0)
- TRACE_RET(chip, STATUS_FAIL);
-
- wait_timeout(5);
- RTSX_READ_REG(chip, SPI_DATA, &data);
-
- if (val)
- *val = data;
-
- RTSX_WRITE_REG(chip, CARD_GPIO_DIR, 0x01, 0x01);
-
- return STATUS_SUCCESS;
-}
-
-int spi_write_eeprom(struct rtsx_chip *chip, u16 addr, u8 val)
-{
- int retval;
-
- retval = spi_init_eeprom(chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- retval = spi_eeprom_program_enable(chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- rtsx_init_cmd(chip);
-
- rtsx_add_cmd(chip, WRITE_REG_CMD, CARD_GPIO_DIR, 0x01, 0);
- rtsx_add_cmd(chip, WRITE_REG_CMD, CARD_DATA_SOURCE, 0x01, RING_BUFFER);
- rtsx_add_cmd(chip, WRITE_REG_CMD, SPI_COMMAND, 0xFF, 0x05);
- rtsx_add_cmd(chip, WRITE_REG_CMD, SPI_ADDR0, 0xFF, val);
- rtsx_add_cmd(chip, WRITE_REG_CMD, SPI_ADDR1, 0xFF, (u8)addr);
- rtsx_add_cmd(chip, WRITE_REG_CMD, SPI_ADDR2, 0xFF, (u8)(addr >> 8));
- rtsx_add_cmd(chip, WRITE_REG_CMD, SPI_CA_NUMBER, 0xFF, 0x4E);
- rtsx_add_cmd(chip, WRITE_REG_CMD, SPI_TRANSFER0, 0xFF, SPI_TRANSFER0_START | SPI_CA_MODE0);
- rtsx_add_cmd(chip, CHECK_REG_CMD, SPI_TRANSFER0, SPI_TRANSFER0_END, SPI_TRANSFER0_END);
-
- retval = rtsx_send_cmd(chip, 0, 100);
- if (retval < 0)
- TRACE_RET(chip, STATUS_FAIL);
-
- RTSX_WRITE_REG(chip, CARD_GPIO_DIR, 0x01, 0x01);
-
- return STATUS_SUCCESS;
-}
-
-
-int spi_get_status(struct scsi_cmnd *srb, struct rtsx_chip *chip)
-{
- struct spi_info *spi = &(chip->spi);
-
- RTSX_DEBUGP("spi_get_status: err_code = 0x%x\n", spi->err_code);
- rtsx_stor_set_xfer_buf(&(spi->err_code), min((int)scsi_bufflen(srb), 1), srb);
- scsi_set_resid(srb, scsi_bufflen(srb) - 1);
-
- return STATUS_SUCCESS;
-}
-
-int spi_set_parameter(struct scsi_cmnd *srb, struct rtsx_chip *chip)
-{
- struct spi_info *spi = &(chip->spi);
-
- spi_set_err_code(chip, SPI_NO_ERR);
-
- if (chip->asic_code)
- spi->spi_clock = ((u16)(srb->cmnd[8]) << 8) | srb->cmnd[9];
- else
- spi->spi_clock = srb->cmnd[3];
-
- spi->clk_div = ((u16)(srb->cmnd[4]) << 8) | srb->cmnd[5];
- spi->write_en = srb->cmnd[6];
-
- RTSX_DEBUGP("spi_set_parameter: spi_clock = %d, clk_div = %d, write_en = %d\n",
- spi->spi_clock, spi->clk_div, spi->write_en);
-
- return STATUS_SUCCESS;
-}
-
-int spi_read_flash_id(struct scsi_cmnd *srb, struct rtsx_chip *chip)
-{
- int retval;
- u16 len;
- u8 *buf;
-
- spi_set_err_code(chip, SPI_NO_ERR);
-
- len = ((u16)(srb->cmnd[7]) << 8) | srb->cmnd[8];
- if (len > 512) {
- spi_set_err_code(chip, SPI_INVALID_COMMAND);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- retval = spi_set_init_para(chip);
- if (retval != STATUS_SUCCESS) {
- spi_set_err_code(chip, SPI_HW_ERR);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- rtsx_init_cmd(chip);
-
- rtsx_add_cmd(chip, WRITE_REG_CMD, CARD_DATA_SOURCE, 0x01, PINGPONG_BUFFER);
-
- rtsx_add_cmd(chip, WRITE_REG_CMD, SPI_COMMAND, 0xFF, srb->cmnd[3]);
- rtsx_add_cmd(chip, WRITE_REG_CMD, SPI_ADDR2, 0xFF, srb->cmnd[4]);
- rtsx_add_cmd(chip, WRITE_REG_CMD, SPI_ADDR1, 0xFF, srb->cmnd[5]);
- rtsx_add_cmd(chip, WRITE_REG_CMD, SPI_ADDR0, 0xFF, srb->cmnd[6]);
- rtsx_add_cmd(chip, WRITE_REG_CMD, SPI_CA_NUMBER, 0xFF, SPI_COMMAND_BIT_8 | SPI_ADDRESS_BIT_24);
- rtsx_add_cmd(chip, WRITE_REG_CMD, SPI_LENGTH1, 0xFF, srb->cmnd[7]);
- rtsx_add_cmd(chip, WRITE_REG_CMD, SPI_LENGTH0, 0xFF, srb->cmnd[8]);
-
- if (len == 0) {
- if (srb->cmnd[9]) {
- rtsx_add_cmd(chip, WRITE_REG_CMD, SPI_TRANSFER0,
- 0xFF, SPI_TRANSFER0_START | SPI_CA_MODE0);
- } else {
- rtsx_add_cmd(chip, WRITE_REG_CMD, SPI_TRANSFER0,
- 0xFF, SPI_TRANSFER0_START | SPI_C_MODE0);
- }
- } else {
- if (srb->cmnd[9]) {
- rtsx_add_cmd(chip, WRITE_REG_CMD, SPI_TRANSFER0,
- 0xFF, SPI_TRANSFER0_START | SPI_CADI_MODE0);
- } else {
- rtsx_add_cmd(chip, WRITE_REG_CMD, SPI_TRANSFER0,
- 0xFF, SPI_TRANSFER0_START | SPI_CDI_MODE0);
- }
- }
-
- rtsx_add_cmd(chip, CHECK_REG_CMD, SPI_TRANSFER0, SPI_TRANSFER0_END, SPI_TRANSFER0_END);
-
- retval = rtsx_send_cmd(chip, 0, 100);
- if (retval < 0) {
- rtsx_clear_spi_error(chip);
- spi_set_err_code(chip, SPI_HW_ERR);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- if (len) {
- buf = kmalloc(len, GFP_KERNEL);
- if (!buf)
- TRACE_RET(chip, STATUS_ERROR);
-
- retval = rtsx_read_ppbuf(chip, buf, len);
- if (retval != STATUS_SUCCESS) {
- spi_set_err_code(chip, SPI_READ_ERR);
- kfree(buf);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- rtsx_stor_set_xfer_buf(buf, scsi_bufflen(srb), srb);
- scsi_set_resid(srb, 0);
-
- kfree(buf);
- }
-
- return STATUS_SUCCESS;
-}
-
-int spi_read_flash(struct scsi_cmnd *srb, struct rtsx_chip *chip)
-{
- int retval;
- unsigned int index = 0, offset = 0;
- u8 ins, slow_read;
- u32 addr;
- u16 len;
- u8 *buf;
-
- spi_set_err_code(chip, SPI_NO_ERR);
-
- ins = srb->cmnd[3];
- addr = ((u32)(srb->cmnd[4]) << 16) | ((u32)(srb->cmnd[5]) << 8) | srb->cmnd[6];
- len = ((u16)(srb->cmnd[7]) << 8) | srb->cmnd[8];
- slow_read = srb->cmnd[9];
-
- retval = spi_set_init_para(chip);
- if (retval != STATUS_SUCCESS) {
- spi_set_err_code(chip, SPI_HW_ERR);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- buf = kmalloc(SF_PAGE_LEN, GFP_KERNEL);
- if (buf == NULL)
- TRACE_RET(chip, STATUS_ERROR);
-
- while (len) {
- u16 pagelen = SF_PAGE_LEN - (u8)addr;
-
- if (pagelen > len)
- pagelen = len;
-
- rtsx_init_cmd(chip);
-
- trans_dma_enable(DMA_FROM_DEVICE, chip, 256, DMA_256);
-
- rtsx_add_cmd(chip, WRITE_REG_CMD, SPI_COMMAND, 0xFF, ins);
-
- if (slow_read) {
- rtsx_add_cmd(chip, WRITE_REG_CMD, SPI_ADDR0, 0xFF, (u8)addr);
- rtsx_add_cmd(chip, WRITE_REG_CMD, SPI_ADDR1, 0xFF, (u8)(addr >> 8));
- rtsx_add_cmd(chip, WRITE_REG_CMD, SPI_ADDR2, 0xFF, (u8)(addr >> 16));
- rtsx_add_cmd(chip, WRITE_REG_CMD, SPI_CA_NUMBER, 0xFF, SPI_COMMAND_BIT_8 | SPI_ADDRESS_BIT_24);
- } else {
- rtsx_add_cmd(chip, WRITE_REG_CMD, SPI_ADDR1, 0xFF, (u8)addr);
- rtsx_add_cmd(chip, WRITE_REG_CMD, SPI_ADDR2, 0xFF, (u8)(addr >> 8));
- rtsx_add_cmd(chip, WRITE_REG_CMD, SPI_ADDR3, 0xFF, (u8)(addr >> 16));
- rtsx_add_cmd(chip, WRITE_REG_CMD, SPI_CA_NUMBER, 0xFF, SPI_COMMAND_BIT_8 | SPI_ADDRESS_BIT_32);
- }
-
- rtsx_add_cmd(chip, WRITE_REG_CMD, SPI_LENGTH1, 0xFF, (u8)(pagelen >> 8));
- rtsx_add_cmd(chip, WRITE_REG_CMD, SPI_LENGTH0, 0xFF, (u8)pagelen);
-
- rtsx_add_cmd(chip, WRITE_REG_CMD, SPI_TRANSFER0, 0xFF, SPI_TRANSFER0_START | SPI_CADI_MODE0);
- rtsx_add_cmd(chip, CHECK_REG_CMD, SPI_TRANSFER0, SPI_TRANSFER0_END, SPI_TRANSFER0_END);
-
- rtsx_send_cmd_no_wait(chip);
-
- retval = rtsx_transfer_data(chip, 0, buf, pagelen, 0, DMA_FROM_DEVICE, 10000);
- if (retval < 0) {
- kfree(buf);
- rtsx_clear_spi_error(chip);
- spi_set_err_code(chip, SPI_HW_ERR);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- rtsx_stor_access_xfer_buf(buf, pagelen, srb, &index, &offset, TO_XFER_BUF);
-
- addr += pagelen;
- len -= pagelen;
- }
-
- scsi_set_resid(srb, 0);
- kfree(buf);
-
- return STATUS_SUCCESS;
-}
-
-int spi_write_flash(struct scsi_cmnd *srb, struct rtsx_chip *chip)
-{
- int retval;
- u8 ins, program_mode;
- u32 addr;
- u16 len;
- u8 *buf;
- unsigned int index = 0, offset = 0;
-
- spi_set_err_code(chip, SPI_NO_ERR);
-
- ins = srb->cmnd[3];
- addr = ((u32)(srb->cmnd[4]) << 16) | ((u32)(srb->cmnd[5]) << 8) | srb->cmnd[6];
- len = ((u16)(srb->cmnd[7]) << 8) | srb->cmnd[8];
- program_mode = srb->cmnd[9];
-
- retval = spi_set_init_para(chip);
- if (retval != STATUS_SUCCESS) {
- spi_set_err_code(chip, SPI_HW_ERR);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- if (program_mode == BYTE_PROGRAM) {
- buf = kmalloc(4, GFP_KERNEL);
- if (!buf)
- TRACE_RET(chip, STATUS_ERROR);
-
- while (len) {
- retval = sf_enable_write(chip, SPI_WREN);
- if (retval != STATUS_SUCCESS) {
- kfree(buf);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- rtsx_stor_access_xfer_buf(buf, 1, srb, &index, &offset, FROM_XFER_BUF);
-
- rtsx_init_cmd(chip);
-
- rtsx_add_cmd(chip, WRITE_REG_CMD, CARD_DATA_SOURCE, 0x01, PINGPONG_BUFFER);
- rtsx_add_cmd(chip, WRITE_REG_CMD, PPBUF_BASE2, 0xFF, buf[0]);
- sf_program(chip, ins, 1, addr, 1);
-
- retval = rtsx_send_cmd(chip, 0, 100);
- if (retval < 0) {
- kfree(buf);
- rtsx_clear_spi_error(chip);
- spi_set_err_code(chip, SPI_HW_ERR);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- retval = sf_polling_status(chip, 100);
- if (retval != STATUS_SUCCESS) {
- kfree(buf);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- addr++;
- len--;
- }
-
- kfree(buf);
-
- } else if (program_mode == AAI_PROGRAM) {
- int first_byte = 1;
-
- retval = sf_enable_write(chip, SPI_WREN);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- buf = kmalloc(4, GFP_KERNEL);
- if (!buf)
- TRACE_RET(chip, STATUS_ERROR);
-
- while (len) {
- rtsx_stor_access_xfer_buf(buf, 1, srb, &index, &offset, FROM_XFER_BUF);
-
- rtsx_init_cmd(chip);
-
- rtsx_add_cmd(chip, WRITE_REG_CMD, CARD_DATA_SOURCE, 0x01, PINGPONG_BUFFER);
- rtsx_add_cmd(chip, WRITE_REG_CMD, PPBUF_BASE2, 0xFF, buf[0]);
- if (first_byte) {
- sf_program(chip, ins, 1, addr, 1);
- first_byte = 0;
- } else {
- sf_program(chip, ins, 0, 0, 1);
- }
-
- retval = rtsx_send_cmd(chip, 0, 100);
- if (retval < 0) {
- kfree(buf);
- rtsx_clear_spi_error(chip);
- spi_set_err_code(chip, SPI_HW_ERR);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- retval = sf_polling_status(chip, 100);
- if (retval != STATUS_SUCCESS) {
- kfree(buf);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- len--;
- }
-
- kfree(buf);
-
- retval = sf_disable_write(chip, SPI_WRDI);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- retval = sf_polling_status(chip, 100);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
- } else if (program_mode == PAGE_PROGRAM) {
- buf = kmalloc(SF_PAGE_LEN, GFP_KERNEL);
- if (!buf)
- TRACE_RET(chip, STATUS_NOMEM);
-
- while (len) {
- u16 pagelen = SF_PAGE_LEN - (u8)addr;
-
- if (pagelen > len)
- pagelen = len;
-
- retval = sf_enable_write(chip, SPI_WREN);
- if (retval != STATUS_SUCCESS) {
- kfree(buf);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- rtsx_init_cmd(chip);
-
- trans_dma_enable(DMA_TO_DEVICE, chip, 256, DMA_256);
- sf_program(chip, ins, 1, addr, pagelen);
-
- rtsx_send_cmd_no_wait(chip);
-
- rtsx_stor_access_xfer_buf(buf, pagelen, srb, &index, &offset, FROM_XFER_BUF);
-
- retval = rtsx_transfer_data(chip, 0, buf, pagelen, 0, DMA_TO_DEVICE, 100);
- if (retval < 0) {
- kfree(buf);
- rtsx_clear_spi_error(chip);
- spi_set_err_code(chip, SPI_HW_ERR);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- retval = sf_polling_status(chip, 100);
- if (retval != STATUS_SUCCESS) {
- kfree(buf);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- addr += pagelen;
- len -= pagelen;
- }
-
- kfree(buf);
- } else {
- spi_set_err_code(chip, SPI_INVALID_COMMAND);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- return STATUS_SUCCESS;
-}
-
-int spi_erase_flash(struct scsi_cmnd *srb, struct rtsx_chip *chip)
-{
- int retval;
- u8 ins, erase_mode;
- u32 addr;
-
- spi_set_err_code(chip, SPI_NO_ERR);
-
- ins = srb->cmnd[3];
- addr = ((u32)(srb->cmnd[4]) << 16) | ((u32)(srb->cmnd[5]) << 8) | srb->cmnd[6];
- erase_mode = srb->cmnd[9];
-
- retval = spi_set_init_para(chip);
- if (retval != STATUS_SUCCESS) {
- spi_set_err_code(chip, SPI_HW_ERR);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- if (erase_mode == PAGE_ERASE) {
- retval = sf_enable_write(chip, SPI_WREN);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- retval = sf_erase(chip, ins, 1, addr);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
- } else if (erase_mode == CHIP_ERASE) {
- retval = sf_enable_write(chip, SPI_WREN);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- retval = sf_erase(chip, ins, 0, 0);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
- } else {
- spi_set_err_code(chip, SPI_INVALID_COMMAND);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- return STATUS_SUCCESS;
-}
-
-int spi_write_flash_status(struct scsi_cmnd *srb, struct rtsx_chip *chip)
-{
- int retval;
- u8 ins, status, ewsr;
-
- ins = srb->cmnd[3];
- status = srb->cmnd[4];
- ewsr = srb->cmnd[5];
-
- retval = spi_set_init_para(chip);
- if (retval != STATUS_SUCCESS) {
- spi_set_err_code(chip, SPI_HW_ERR);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- retval = sf_enable_write(chip, ewsr);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- rtsx_init_cmd(chip);
-
- rtsx_add_cmd(chip, WRITE_REG_CMD, CARD_DATA_SOURCE, 0x01, PINGPONG_BUFFER);
-
- rtsx_add_cmd(chip, WRITE_REG_CMD, SPI_COMMAND, 0xFF, ins);
- rtsx_add_cmd(chip, WRITE_REG_CMD, SPI_CA_NUMBER, 0xFF, SPI_COMMAND_BIT_8 | SPI_ADDRESS_BIT_24);
- rtsx_add_cmd(chip, WRITE_REG_CMD, SPI_LENGTH1, 0xFF, 0);
- rtsx_add_cmd(chip, WRITE_REG_CMD, SPI_LENGTH0, 0xFF, 1);
- rtsx_add_cmd(chip, WRITE_REG_CMD, PPBUF_BASE2, 0xFF, status);
- rtsx_add_cmd(chip, WRITE_REG_CMD, SPI_TRANSFER0, 0xFF, SPI_TRANSFER0_START | SPI_CDO_MODE0);
- rtsx_add_cmd(chip, CHECK_REG_CMD, SPI_TRANSFER0, SPI_TRANSFER0_END, SPI_TRANSFER0_END);
-
- retval = rtsx_send_cmd(chip, 0, 100);
- if (retval != STATUS_SUCCESS) {
- rtsx_clear_spi_error(chip);
- spi_set_err_code(chip, SPI_HW_ERR);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- return STATUS_SUCCESS;
-}
-
diff --git a/drivers/staging/rts_pstor/spi.h b/drivers/staging/rts_pstor/spi.h
deleted file mode 100644
index b59291f..0000000
--- a/drivers/staging/rts_pstor/spi.h
+++ /dev/null
@@ -1,65 +0,0 @@
-/* Driver for Realtek PCI-Express card reader
- * Header file
- *
- * Copyright(c) 2009 Realtek Semiconductor Corp. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, see <http://www.gnu.org/licenses/>.
- *
- * Author:
- * wwang (wei_wang@realsil.com.cn)
- * No. 450, Shenhu Road, Suzhou Industry Park, Suzhou, China
- */
-
-#ifndef __REALTEK_RTSX_SPI_H
-#define __REALTEK_RTSX_SPI_H
-
-/* SPI operation error */
-#define SPI_NO_ERR 0x00
-#define SPI_HW_ERR 0x01
-#define SPI_INVALID_COMMAND 0x02
-#define SPI_READ_ERR 0x03
-#define SPI_WRITE_ERR 0x04
-#define SPI_ERASE_ERR 0x05
-#define SPI_BUSY_ERR 0x06
-
-/* Serial flash instruction */
-#define SPI_READ 0x03
-#define SPI_FAST_READ 0x0B
-#define SPI_WREN 0x06
-#define SPI_WRDI 0x04
-#define SPI_RDSR 0x05
-
-#define SF_PAGE_LEN 256
-
-#define BYTE_PROGRAM 0
-#define AAI_PROGRAM 1
-#define PAGE_PROGRAM 2
-
-#define PAGE_ERASE 0
-#define CHIP_ERASE 1
-
-int spi_erase_eeprom_chip(struct rtsx_chip *chip);
-int spi_erase_eeprom_byte(struct rtsx_chip *chip, u16 addr);
-int spi_read_eeprom(struct rtsx_chip *chip, u16 addr, u8 *val);
-int spi_write_eeprom(struct rtsx_chip *chip, u16 addr, u8 val);
-int spi_get_status(struct scsi_cmnd *srb, struct rtsx_chip *chip);
-int spi_set_parameter(struct scsi_cmnd *srb, struct rtsx_chip *chip);
-int spi_read_flash_id(struct scsi_cmnd *srb, struct rtsx_chip *chip);
-int spi_read_flash(struct scsi_cmnd *srb, struct rtsx_chip *chip);
-int spi_write_flash(struct scsi_cmnd *srb, struct rtsx_chip *chip);
-int spi_erase_flash(struct scsi_cmnd *srb, struct rtsx_chip *chip);
-int spi_write_flash_status(struct scsi_cmnd *srb, struct rtsx_chip *chip);
-
-
-#endif /* __REALTEK_RTSX_SPI_H */
diff --git a/drivers/staging/rts_pstor/trace.h b/drivers/staging/rts_pstor/trace.h
deleted file mode 100644
index cf60a1b..0000000
--- a/drivers/staging/rts_pstor/trace.h
+++ /dev/null
@@ -1,93 +0,0 @@
-/* Driver for Realtek PCI-Express card reader
- * Header file
- *
- * Copyright(c) 2009 Realtek Semiconductor Corp. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, see <http://www.gnu.org/licenses/>.
- *
- * Author:
- * wwang (wei_wang@realsil.com.cn)
- * No. 450, Shenhu Road, Suzhou Industry Park, Suzhou, China
- */
-
-#ifndef __REALTEK_RTSX_TRACE_H
-#define __REALTEK_RTSX_TRACE_H
-
-#define _MSG_TRACE
-
-#ifdef _MSG_TRACE
-static inline char *filename(char *path)
-{
- char *ptr;
-
- if (path == NULL)
- return NULL;
-
- ptr = path;
-
- while (*ptr != '\0') {
- if ((*ptr == '\\') || (*ptr == '/'))
- path = ptr + 1;
-
- ptr++;
- }
-
- return path;
-}
-
-#define TRACE_RET(chip, ret) \
-do { \
- char *_file = filename(__FILE__); \
- RTSX_DEBUGP("[%s][%s]:[%d]\n", _file, __func__, __LINE__); \
- (chip)->trace_msg[(chip)->msg_idx].line = (u16)(__LINE__); \
- strncpy((chip)->trace_msg[(chip)->msg_idx].func, __func__, MSG_FUNC_LEN-1); \
- strncpy((chip)->trace_msg[(chip)->msg_idx].file, _file, MSG_FILE_LEN-1); \
- get_current_time((chip)->trace_msg[(chip)->msg_idx].timeval_buf, TIME_VAL_LEN); \
- (chip)->trace_msg[(chip)->msg_idx].valid = 1; \
- (chip)->msg_idx++; \
- if ((chip)->msg_idx >= TRACE_ITEM_CNT) { \
- (chip)->msg_idx = 0; \
- } \
- return ret; \
-} while (0)
-
-#define TRACE_GOTO(chip, label) \
-do { \
- char *_file = filename(__FILE__); \
- RTSX_DEBUGP("[%s][%s]:[%d]\n", _file, __func__, __LINE__); \
- (chip)->trace_msg[(chip)->msg_idx].line = (u16)(__LINE__); \
- strncpy((chip)->trace_msg[(chip)->msg_idx].func, __func__, MSG_FUNC_LEN-1); \
- strncpy((chip)->trace_msg[(chip)->msg_idx].file, _file, MSG_FILE_LEN-1); \
- get_current_time((chip)->trace_msg[(chip)->msg_idx].timeval_buf, TIME_VAL_LEN); \
- (chip)->trace_msg[(chip)->msg_idx].valid = 1; \
- (chip)->msg_idx++; \
- if ((chip)->msg_idx >= TRACE_ITEM_CNT) { \
- (chip)->msg_idx = 0; \
- } \
- goto label; \
-} while (0)
-#else
-#define TRACE_RET(chip, ret) return ret
-#define TRACE_GOTO(chip, label) goto label
-#endif
-
-#ifdef CONFIG_RTS_PSTOR_DEBUG
-#define RTSX_DUMP(buf, buf_len) \
- print_hex_dump(KERN_DEBUG, RTSX_STOR, DUMP_PREFIX_NONE, \
- 16, 1, (buf), (buf_len), false)
-#else
-#define RTSX_DUMP(buf, buf_len)
-#endif
-
-#endif /* __REALTEK_RTSX_TRACE_H */
diff --git a/drivers/staging/rts_pstor/xd.c b/drivers/staging/rts_pstor/xd.c
deleted file mode 100644
index 9bba5b1..0000000
--- a/drivers/staging/rts_pstor/xd.c
+++ /dev/null
@@ -1,2052 +0,0 @@
-/* Driver for Realtek PCI-Express card reader
- *
- * Copyright(c) 2009 Realtek Semiconductor Corp. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, see <http://www.gnu.org/licenses/>.
- *
- * Author:
- * wwang (wei_wang@realsil.com.cn)
- * No. 450, Shenhu Road, Suzhou Industry Park, Suzhou, China
- */
-
-#include <linux/blkdev.h>
-#include <linux/kthread.h>
-#include <linux/sched.h>
-#include <linux/vmalloc.h>
-
-#include "rtsx.h"
-#include "rtsx_transport.h"
-#include "rtsx_scsi.h"
-#include "rtsx_card.h"
-#include "xd.h"
-
-static int xd_build_l2p_tbl(struct rtsx_chip *chip, int zone_no);
-static int xd_init_page(struct rtsx_chip *chip, u32 phy_blk, u16 logoff, u8 start_page, u8 end_page);
-
-static inline void xd_set_err_code(struct rtsx_chip *chip, u8 err_code)
-{
- struct xd_info *xd_card = &(chip->xd_card);
-
- xd_card->err_code = err_code;
-}
-
-static inline int xd_check_err_code(struct rtsx_chip *chip, u8 err_code)
-{
- struct xd_info *xd_card = &(chip->xd_card);
-
- return (xd_card->err_code == err_code);
-}
-
-static int xd_set_init_para(struct rtsx_chip *chip)
-{
- struct xd_info *xd_card = &(chip->xd_card);
- int retval;
-
- if (chip->asic_code)
- xd_card->xd_clock = 47;
- else
- xd_card->xd_clock = CLK_50;
-
- retval = switch_clock(chip, xd_card->xd_clock);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- return STATUS_SUCCESS;
-}
-
-static int xd_switch_clock(struct rtsx_chip *chip)
-{
- struct xd_info *xd_card = &(chip->xd_card);
- int retval;
-
- retval = select_card(chip, XD_CARD);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- retval = switch_clock(chip, xd_card->xd_clock);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- return STATUS_SUCCESS;
-}
-
-static int xd_read_id(struct rtsx_chip *chip, u8 id_cmd, u8 *id_buf, u8 buf_len)
-{
- int retval, i;
- u8 *ptr;
-
- rtsx_init_cmd(chip);
-
- rtsx_add_cmd(chip, WRITE_REG_CMD, XD_DAT, 0xFF, id_cmd);
- rtsx_add_cmd(chip, WRITE_REG_CMD, XD_TRANSFER, 0xFF, XD_TRANSFER_START | XD_READ_ID);
- rtsx_add_cmd(chip, CHECK_REG_CMD, XD_TRANSFER, XD_TRANSFER_END, XD_TRANSFER_END);
-
- for (i = 0; i < 4; i++)
- rtsx_add_cmd(chip, READ_REG_CMD, (u16)(XD_ADDRESS1 + i), 0, 0);
-
- retval = rtsx_send_cmd(chip, XD_CARD, 20);
- if (retval < 0)
- TRACE_RET(chip, STATUS_FAIL);
-
- ptr = rtsx_get_cmd_data(chip) + 1;
- if (id_buf && buf_len) {
- if (buf_len > 4)
- buf_len = 4;
- memcpy(id_buf, ptr, buf_len);
- }
-
- return STATUS_SUCCESS;
-}
-
-static void xd_assign_phy_addr(struct rtsx_chip *chip, u32 addr, u8 mode)
-{
- struct xd_info *xd_card = &(chip->xd_card);
-
- switch (mode) {
- case XD_RW_ADDR:
- rtsx_add_cmd(chip, WRITE_REG_CMD, XD_ADDRESS0, 0xFF, 0);
- rtsx_add_cmd(chip, WRITE_REG_CMD, XD_ADDRESS1, 0xFF, (u8)addr);
- rtsx_add_cmd(chip, WRITE_REG_CMD, XD_ADDRESS2, 0xFF, (u8)(addr >> 8));
- rtsx_add_cmd(chip, WRITE_REG_CMD, XD_ADDRESS3, 0xFF, (u8)(addr >> 16));
- rtsx_add_cmd(chip, WRITE_REG_CMD, XD_CFG, 0xFF,
- xd_card->addr_cycle | XD_CALC_ECC | XD_BA_NO_TRANSFORM);
- break;
-
- case XD_ERASE_ADDR:
- rtsx_add_cmd(chip, WRITE_REG_CMD, XD_ADDRESS0, 0xFF, (u8)addr);
- rtsx_add_cmd(chip, WRITE_REG_CMD, XD_ADDRESS1, 0xFF, (u8)(addr >> 8));
- rtsx_add_cmd(chip, WRITE_REG_CMD, XD_ADDRESS2, 0xFF, (u8)(addr >> 16));
- rtsx_add_cmd(chip, WRITE_REG_CMD, XD_CFG, 0xFF,
- (xd_card->addr_cycle - 1) | XD_CALC_ECC | XD_BA_NO_TRANSFORM);
- break;
-
- default:
- break;
- }
-}
-
-static int xd_read_redundant(struct rtsx_chip *chip, u32 page_addr, u8 *buf, int buf_len)
-{
- int retval, i;
-
- rtsx_init_cmd(chip);
-
- xd_assign_phy_addr(chip, page_addr, XD_RW_ADDR);
-
- rtsx_add_cmd(chip, WRITE_REG_CMD, XD_TRANSFER, 0xFF, XD_TRANSFER_START | XD_READ_REDUNDANT);
- rtsx_add_cmd(chip, CHECK_REG_CMD, XD_TRANSFER, XD_TRANSFER_END, XD_TRANSFER_END);
-
- for (i = 0; i < 6; i++)
- rtsx_add_cmd(chip, READ_REG_CMD, (u16)(XD_PAGE_STATUS + i), 0, 0);
- for (i = 0; i < 4; i++)
- rtsx_add_cmd(chip, READ_REG_CMD, (u16)(XD_RESERVED0 + i), 0, 0);
- rtsx_add_cmd(chip, READ_REG_CMD, XD_PARITY, 0, 0);
-
- retval = rtsx_send_cmd(chip, XD_CARD, 500);
- if (retval < 0)
- TRACE_RET(chip, STATUS_FAIL);
-
- if (buf && buf_len) {
- u8 *ptr = rtsx_get_cmd_data(chip) + 1;
-
- if (buf_len > 11)
- buf_len = 11;
- memcpy(buf, ptr, buf_len);
- }
-
- return STATUS_SUCCESS;
-}
-
-static int xd_read_data_from_ppb(struct rtsx_chip *chip, int offset, u8 *buf, int buf_len)
-{
- int retval, i;
-
- if (!buf || (buf_len < 0))
- TRACE_RET(chip, STATUS_FAIL);
-
- rtsx_init_cmd(chip);
-
- for (i = 0; i < buf_len; i++)
- rtsx_add_cmd(chip, READ_REG_CMD, PPBUF_BASE2 + offset + i, 0, 0);
-
- retval = rtsx_send_cmd(chip, 0, 250);
- if (retval < 0) {
- rtsx_clear_xd_error(chip);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- memcpy(buf, rtsx_get_cmd_data(chip), buf_len);
-
- return STATUS_SUCCESS;
-}
-
-static int xd_read_cis(struct rtsx_chip *chip, u32 page_addr, u8 *buf, int buf_len)
-{
- int retval;
- u8 reg;
-
- if (!buf || (buf_len < 10))
- TRACE_RET(chip, STATUS_FAIL);
-
- rtsx_init_cmd(chip);
-
- xd_assign_phy_addr(chip, page_addr, XD_RW_ADDR);
-
- rtsx_add_cmd(chip, WRITE_REG_CMD, CARD_DATA_SOURCE, 0x01, PINGPONG_BUFFER);
- rtsx_add_cmd(chip, WRITE_REG_CMD, XD_PAGE_CNT, 0xFF, 1);
- rtsx_add_cmd(chip, WRITE_REG_CMD, XD_CHK_DATA_STATUS, XD_AUTO_CHK_DATA_STATUS, XD_AUTO_CHK_DATA_STATUS);
-
- rtsx_add_cmd(chip, WRITE_REG_CMD, XD_TRANSFER, 0xFF, XD_TRANSFER_START | XD_READ_PAGES);
- rtsx_add_cmd(chip, CHECK_REG_CMD, XD_TRANSFER, XD_TRANSFER_END, XD_TRANSFER_END);
-
- retval = rtsx_send_cmd(chip, XD_CARD, 250);
- if (retval == -ETIMEDOUT) {
- rtsx_clear_xd_error(chip);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- RTSX_READ_REG(chip, XD_PAGE_STATUS, ®);
- if (reg != XD_GPG) {
- rtsx_clear_xd_error(chip);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- RTSX_READ_REG(chip, XD_CTL, ®);
- if (!(reg & XD_ECC1_ERROR) || !(reg & XD_ECC1_UNCORRECTABLE)) {
- retval = xd_read_data_from_ppb(chip, 0, buf, buf_len);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
- if (reg & XD_ECC1_ERROR) {
- u8 ecc_bit, ecc_byte;
-
- RTSX_READ_REG(chip, XD_ECC_BIT1, &ecc_bit);
- RTSX_READ_REG(chip, XD_ECC_BYTE1, &ecc_byte);
-
- RTSX_DEBUGP("ECC_BIT1 = 0x%x, ECC_BYTE1 = 0x%x\n", ecc_bit, ecc_byte);
- if (ecc_byte < buf_len) {
- RTSX_DEBUGP("Before correct: 0x%x\n", buf[ecc_byte]);
- buf[ecc_byte] ^= (1 << ecc_bit);
- RTSX_DEBUGP("After correct: 0x%x\n", buf[ecc_byte]);
- }
- }
- } else if (!(reg & XD_ECC2_ERROR) || !(reg & XD_ECC2_UNCORRECTABLE)) {
- rtsx_clear_xd_error(chip);
-
- retval = xd_read_data_from_ppb(chip, 256, buf, buf_len);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
- if (reg & XD_ECC2_ERROR) {
- u8 ecc_bit, ecc_byte;
-
- RTSX_READ_REG(chip, XD_ECC_BIT2, &ecc_bit);
- RTSX_READ_REG(chip, XD_ECC_BYTE2, &ecc_byte);
-
- RTSX_DEBUGP("ECC_BIT2 = 0x%x, ECC_BYTE2 = 0x%x\n", ecc_bit, ecc_byte);
- if (ecc_byte < buf_len) {
- RTSX_DEBUGP("Before correct: 0x%x\n", buf[ecc_byte]);
- buf[ecc_byte] ^= (1 << ecc_bit);
- RTSX_DEBUGP("After correct: 0x%x\n", buf[ecc_byte]);
- }
- }
- } else {
- rtsx_clear_xd_error(chip);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- return STATUS_SUCCESS;
-}
-
-static void xd_fill_pull_ctl_disable(struct rtsx_chip *chip)
-{
- if (CHECK_PID(chip, 0x5209)) {
- rtsx_add_cmd(chip, WRITE_REG_CMD, CARD_PULL_CTL1, 0xFF, 0x55);
- rtsx_add_cmd(chip, WRITE_REG_CMD, CARD_PULL_CTL2, 0xFF, 0x55);
- rtsx_add_cmd(chip, WRITE_REG_CMD, CARD_PULL_CTL3, 0xFF, 0xD5);
- rtsx_add_cmd(chip, WRITE_REG_CMD, CARD_PULL_CTL4, 0xFF, 0x55);
- rtsx_add_cmd(chip, WRITE_REG_CMD, CARD_PULL_CTL5, 0xFF, 0x55);
- rtsx_add_cmd(chip, WRITE_REG_CMD, CARD_PULL_CTL6, 0xFF, 0x15);
- } else if (CHECK_PID(chip, 0x5208)) {
- rtsx_add_cmd(chip, WRITE_REG_CMD, CARD_PULL_CTL1, 0xFF,
- XD_D3_PD | XD_D2_PD | XD_D1_PD | XD_D0_PD);
- rtsx_add_cmd(chip, WRITE_REG_CMD, CARD_PULL_CTL2, 0xFF,
- XD_D7_PD | XD_D6_PD | XD_D5_PD | XD_D4_PD);
- rtsx_add_cmd(chip, WRITE_REG_CMD, CARD_PULL_CTL3, 0xFF,
- XD_WP_PD | XD_CE_PD | XD_CLE_PD | XD_CD_PU);
- rtsx_add_cmd(chip, WRITE_REG_CMD, CARD_PULL_CTL4, 0xFF,
- XD_RDY_PD | XD_WE_PD | XD_RE_PD | XD_ALE_PD);
- rtsx_add_cmd(chip, WRITE_REG_CMD, CARD_PULL_CTL5, 0xFF,
- MS_INS_PU | SD_WP_PD | SD_CD_PU | SD_CMD_PD);
- rtsx_add_cmd(chip, WRITE_REG_CMD, CARD_PULL_CTL6, 0xFF, MS_D5_PD | MS_D4_PD);
- } else if (CHECK_PID(chip, 0x5288)) {
- if (CHECK_BARO_PKG(chip, QFN)) {
- rtsx_add_cmd(chip, WRITE_REG_CMD, CARD_PULL_CTL1, 0xFF, 0x55);
- rtsx_add_cmd(chip, WRITE_REG_CMD, CARD_PULL_CTL2, 0xFF, 0x55);
- rtsx_add_cmd(chip, WRITE_REG_CMD, CARD_PULL_CTL3, 0xFF, 0x4B);
- rtsx_add_cmd(chip, WRITE_REG_CMD, CARD_PULL_CTL4, 0xFF, 0x69);
- }
- }
-}
-
-static void xd_fill_pull_ctl_stage1_barossa(struct rtsx_chip *chip)
-{
- if (CHECK_BARO_PKG(chip, QFN)) {
- rtsx_add_cmd(chip, WRITE_REG_CMD, CARD_PULL_CTL1, 0xFF, 0x55);
- rtsx_add_cmd(chip, WRITE_REG_CMD, CARD_PULL_CTL2, 0xFF, 0x55);
- rtsx_add_cmd(chip, WRITE_REG_CMD, CARD_PULL_CTL3, 0xFF, 0x4B);
- rtsx_add_cmd(chip, WRITE_REG_CMD, CARD_PULL_CTL4, 0xFF, 0x55);
- }
-}
-
-static void xd_fill_pull_ctl_enable(struct rtsx_chip *chip)
-{
- if (CHECK_PID(chip, 0x5209)) {
- rtsx_add_cmd(chip, WRITE_REG_CMD, CARD_PULL_CTL1, 0xFF, 0xAA);
- rtsx_add_cmd(chip, WRITE_REG_CMD, CARD_PULL_CTL2, 0xFF, 0x55);
- rtsx_add_cmd(chip, WRITE_REG_CMD, CARD_PULL_CTL3, 0xFF, 0xD5);
- rtsx_add_cmd(chip, WRITE_REG_CMD, CARD_PULL_CTL4, 0xFF, 0x55);
- rtsx_add_cmd(chip, WRITE_REG_CMD, CARD_PULL_CTL5, 0xFF, 0x55);
- rtsx_add_cmd(chip, WRITE_REG_CMD, CARD_PULL_CTL6, 0xFF, 0x15);
- } else if (CHECK_PID(chip, 0x5208)) {
- rtsx_add_cmd(chip, WRITE_REG_CMD, CARD_PULL_CTL1, 0xFF,
- XD_D3_PD | XD_D2_PD | XD_D1_PD | XD_D0_PD);
- rtsx_add_cmd(chip, WRITE_REG_CMD, CARD_PULL_CTL2, 0xFF,
- XD_D7_PD | XD_D6_PD | XD_D5_PD | XD_D4_PD);
- rtsx_add_cmd(chip, WRITE_REG_CMD, CARD_PULL_CTL3, 0xFF,
- XD_WP_PD | XD_CE_PU | XD_CLE_PD | XD_CD_PU);
- rtsx_add_cmd(chip, WRITE_REG_CMD, CARD_PULL_CTL4, 0xFF,
- XD_RDY_PU | XD_WE_PU | XD_RE_PU | XD_ALE_PD);
- rtsx_add_cmd(chip, WRITE_REG_CMD, CARD_PULL_CTL5, 0xFF,
- MS_INS_PU | SD_WP_PD | SD_CD_PU | SD_CMD_PD);
- rtsx_add_cmd(chip, WRITE_REG_CMD, CARD_PULL_CTL6, 0xFF, MS_D5_PD | MS_D4_PD);
- } else if (CHECK_PID(chip, 0x5288)) {
- if (CHECK_BARO_PKG(chip, QFN)) {
- rtsx_add_cmd(chip, WRITE_REG_CMD, CARD_PULL_CTL1, 0xFF, 0x55);
- rtsx_add_cmd(chip, WRITE_REG_CMD, CARD_PULL_CTL2, 0xFF, 0x55);
- rtsx_add_cmd(chip, WRITE_REG_CMD, CARD_PULL_CTL3, 0xFF, 0x53);
- rtsx_add_cmd(chip, WRITE_REG_CMD, CARD_PULL_CTL4, 0xFF, 0xA9);
- }
- }
-}
-
-static int xd_pull_ctl_disable(struct rtsx_chip *chip)
-{
- if (CHECK_PID(chip, 0x5209)) {
- RTSX_WRITE_REG(chip, CARD_PULL_CTL1, 0xFF, 0x55);
- RTSX_WRITE_REG(chip, CARD_PULL_CTL2, 0xFF, 0x55);
- RTSX_WRITE_REG(chip, CARD_PULL_CTL3, 0xFF, 0xD5);
- RTSX_WRITE_REG(chip, CARD_PULL_CTL4, 0xFF, 0x55);
- RTSX_WRITE_REG(chip, CARD_PULL_CTL5, 0xFF, 0x55);
- RTSX_WRITE_REG(chip, CARD_PULL_CTL6, 0xFF, 0x15);
- } else if (CHECK_PID(chip, 0x5208)) {
- RTSX_WRITE_REG(chip, CARD_PULL_CTL1, 0xFF,
- XD_D3_PD | XD_D2_PD | XD_D1_PD | XD_D0_PD);
- RTSX_WRITE_REG(chip, CARD_PULL_CTL2, 0xFF,
- XD_D7_PD | XD_D6_PD | XD_D5_PD | XD_D4_PD);
- RTSX_WRITE_REG(chip, CARD_PULL_CTL3, 0xFF,
- XD_WP_PD | XD_CE_PD | XD_CLE_PD | XD_CD_PU);
- RTSX_WRITE_REG(chip, CARD_PULL_CTL4, 0xFF,
- XD_RDY_PD | XD_WE_PD | XD_RE_PD | XD_ALE_PD);
- RTSX_WRITE_REG(chip, CARD_PULL_CTL5, 0xFF,
- MS_INS_PU | SD_WP_PD | SD_CD_PU | SD_CMD_PD);
- RTSX_WRITE_REG(chip, CARD_PULL_CTL6, 0xFF, MS_D5_PD | MS_D4_PD);
- } else if (CHECK_PID(chip, 0x5288)) {
- if (CHECK_BARO_PKG(chip, QFN)) {
- RTSX_WRITE_REG(chip, CARD_PULL_CTL1, 0xFF, 0x55);
- RTSX_WRITE_REG(chip, CARD_PULL_CTL2, 0xFF, 0x55);
- RTSX_WRITE_REG(chip, CARD_PULL_CTL3, 0xFF, 0x4B);
- RTSX_WRITE_REG(chip, CARD_PULL_CTL4, 0xFF, 0x69);
- }
- }
-
- return STATUS_SUCCESS;
-}
-
-static void xd_clear_dma_buffer(struct rtsx_chip *chip)
-{
- if (CHECK_PID(chip, 0x5209)) {
- int retval;
- u8 *buf;
-
- RTSX_DEBUGP("xD ECC error, dummy write!\n");
-
- buf = kmalloc(512, GFP_KERNEL);
- if (!buf)
- return;
-
- rtsx_init_cmd(chip);
-
- trans_dma_enable(DMA_TO_DEVICE, chip, 512, DMA_512);
-
- rtsx_add_cmd(chip, WRITE_REG_CMD, CARD_SELECT, 0x07, SD_MOD_SEL);
- rtsx_add_cmd(chip, WRITE_REG_CMD, CARD_CLK_EN, SD_CLK_EN, SD_CLK_EN);
- if (chip->asic_code) {
- rtsx_add_cmd(chip, WRITE_REG_CMD, CARD_PULL_CTL2, 0xFF, 0xAA);
- } else {
- rtsx_add_cmd(chip, WRITE_REG_CMD, FPGA_PULL_CTL,
- FPGA_SD_PULL_CTL_BIT, 0);
- }
-
- rtsx_add_cmd(chip, WRITE_REG_CMD, SD_BYTE_CNT_L, 0xFF, 0x00);
- rtsx_add_cmd(chip, WRITE_REG_CMD, SD_BYTE_CNT_H, 0xFF, 0x02);
- rtsx_add_cmd(chip, WRITE_REG_CMD, SD_BLOCK_CNT_L, 0xFF, 1);
- rtsx_add_cmd(chip, WRITE_REG_CMD, SD_BLOCK_CNT_H, 0xFF, 0);
- rtsx_add_cmd(chip, WRITE_REG_CMD, SD_CFG1, 0x03, SD_BUS_WIDTH_4);
-
- rtsx_add_cmd(chip, WRITE_REG_CMD, CARD_DATA_SOURCE, 0x01, RING_BUFFER);
-
- rtsx_add_cmd(chip, WRITE_REG_CMD, SD_TRANSFER, 0xFF,
- SD_TM_AUTO_WRITE_3 | SD_TRANSFER_START);
- rtsx_add_cmd(chip, CHECK_REG_CMD, SD_TRANSFER, SD_TRANSFER_END, SD_TRANSFER_END);
-
- rtsx_send_cmd_no_wait(chip);
-
- retval = rtsx_transfer_data(chip, SD_CARD, buf, 512, 0, DMA_TO_DEVICE, 100);
- if (retval < 0) {
- u8 val;
-
- rtsx_read_register(chip, SD_STAT1, &val);
- RTSX_DEBUGP("SD_STAT1: 0x%x\n", val);
-
- rtsx_read_register(chip, SD_STAT2, &val);
- RTSX_DEBUGP("SD_STAT2: 0x%x\n", val);
-
- rtsx_read_register(chip, SD_BUS_STAT, &val);
- RTSX_DEBUGP("SD_BUS_STAT: 0x%x\n", val);
-
- rtsx_write_register(chip, CARD_STOP, SD_STOP | SD_CLR_ERR, SD_STOP | SD_CLR_ERR);
- }
-
- kfree(buf);
-
- if (chip->asic_code) {
- rtsx_write_register(chip, CARD_PULL_CTL2, 0xFF, 0x55);
- } else {
- rtsx_write_register(chip, FPGA_PULL_CTL,
- FPGA_SD_PULL_CTL_BIT, FPGA_SD_PULL_CTL_BIT);
- }
- rtsx_write_register(chip, CARD_SELECT, 0x07, XD_MOD_SEL);
- rtsx_write_register(chip, CARD_CLK_EN, SD_CLK_EN, 0);
- }
-}
-
-static int reset_xd(struct rtsx_chip *chip)
-{
- struct xd_info *xd_card = &(chip->xd_card);
- int retval, i, j;
- u8 *ptr, id_buf[4], redunt[11];
-
- retval = select_card(chip, XD_CARD);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- rtsx_init_cmd(chip);
-
- rtsx_add_cmd(chip, WRITE_REG_CMD, XD_CHK_DATA_STATUS, 0xFF, XD_PGSTS_NOT_FF);
- if (chip->asic_code) {
- if (!CHECK_PID(chip, 0x5288))
- xd_fill_pull_ctl_disable(chip);
- else
- xd_fill_pull_ctl_stage1_barossa(chip);
- } else {
- rtsx_add_cmd(chip, WRITE_REG_CMD, FPGA_PULL_CTL, 0xFF,
- (FPGA_XD_PULL_CTL_EN1 & FPGA_XD_PULL_CTL_EN3) | 0x20);
- }
-
- if (!chip->ft2_fast_mode)
- rtsx_add_cmd(chip, WRITE_REG_CMD, XD_INIT, XD_NO_AUTO_PWR_OFF, 0);
-
- rtsx_add_cmd(chip, WRITE_REG_CMD, CARD_OE, XD_OUTPUT_EN, 0);
-
- retval = rtsx_send_cmd(chip, XD_CARD, 100);
- if (retval < 0)
- TRACE_RET(chip, STATUS_FAIL);
-
- if (!chip->ft2_fast_mode) {
- retval = card_power_off(chip, XD_CARD);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- wait_timeout(250);
-
- if (CHECK_PID(chip, 0x5209))
- RTSX_WRITE_REG(chip, CARD_PULL_CTL1, 0xFF, 0xAA);
-
- rtsx_init_cmd(chip);
-
- if (chip->asic_code) {
- xd_fill_pull_ctl_enable(chip);
- } else {
- rtsx_add_cmd(chip, WRITE_REG_CMD, FPGA_PULL_CTL, 0xFF,
- (FPGA_XD_PULL_CTL_EN1 & FPGA_XD_PULL_CTL_EN2) | 0x20);
- }
-
- retval = rtsx_send_cmd(chip, XD_CARD, 100);
- if (retval < 0)
- TRACE_RET(chip, STATUS_FAIL);
-
- retval = card_power_on(chip, XD_CARD);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
-#ifdef SUPPORT_OCP
- wait_timeout(50);
- if (chip->ocp_stat & (SD_OC_NOW | SD_OC_EVER)) {
- RTSX_DEBUGP("Over current, OCPSTAT is 0x%x\n", chip->ocp_stat);
- TRACE_RET(chip, STATUS_FAIL);
- }
-#endif
- }
-
- rtsx_init_cmd(chip);
-
- if (chip->ft2_fast_mode) {
- if (chip->asic_code) {
- xd_fill_pull_ctl_enable(chip);
- } else {
- rtsx_add_cmd(chip, WRITE_REG_CMD, FPGA_PULL_CTL, 0xFF,
- (FPGA_XD_PULL_CTL_EN1 & FPGA_XD_PULL_CTL_EN2) | 0x20);
- }
- }
-
- rtsx_add_cmd(chip, WRITE_REG_CMD, CARD_OE, XD_OUTPUT_EN, XD_OUTPUT_EN);
- rtsx_add_cmd(chip, WRITE_REG_CMD, XD_CTL, XD_CE_DISEN, XD_CE_DISEN);
-
- retval = rtsx_send_cmd(chip, XD_CARD, 100);
- if (retval < 0)
- TRACE_RET(chip, STATUS_FAIL);
-
- if (!chip->ft2_fast_mode)
- wait_timeout(200);
-
- retval = xd_set_init_para(chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- /* Read ID to check if the timing setting is right */
- for (i = 0; i < 4; i++) {
- rtsx_init_cmd(chip);
-
- rtsx_add_cmd(chip, WRITE_REG_CMD, XD_DTCTL, 0xFF,
- XD_TIME_SETUP_STEP * 3 + XD_TIME_RW_STEP * (2 + i) + XD_TIME_RWN_STEP * i);
- rtsx_add_cmd(chip, WRITE_REG_CMD, XD_CATCTL, 0xFF,
- XD_TIME_SETUP_STEP * 3 + XD_TIME_RW_STEP * (4 + i) + XD_TIME_RWN_STEP * (3 + i));
-
- rtsx_add_cmd(chip, WRITE_REG_CMD, XD_TRANSFER, 0xFF, XD_TRANSFER_START | XD_RESET);
- rtsx_add_cmd(chip, CHECK_REG_CMD, XD_TRANSFER, XD_TRANSFER_END, XD_TRANSFER_END);
-
- rtsx_add_cmd(chip, READ_REG_CMD, XD_DAT, 0, 0);
- rtsx_add_cmd(chip, READ_REG_CMD, XD_CTL, 0, 0);
-
- retval = rtsx_send_cmd(chip, XD_CARD, 100);
- if (retval < 0)
- TRACE_RET(chip, STATUS_FAIL);
-
- ptr = rtsx_get_cmd_data(chip) + 1;
-
- RTSX_DEBUGP("XD_DAT: 0x%x, XD_CTL: 0x%x\n", ptr[0], ptr[1]);
-
- if (((ptr[0] & READY_FLAG) != READY_STATE) || !(ptr[1] & XD_RDY))
- continue;
-
- retval = xd_read_id(chip, READ_ID, id_buf, 4);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- RTSX_DEBUGP("READ_ID: 0x%x 0x%x 0x%x 0x%x\n",
- id_buf[0], id_buf[1], id_buf[2], id_buf[3]);
-
- xd_card->device_code = id_buf[1];
-
- /* Check if the xD card is supported */
- switch (xd_card->device_code) {
- case XD_4M_X8_512_1:
- case XD_4M_X8_512_2:
- xd_card->block_shift = 4;
- xd_card->page_off = 0x0F;
- xd_card->addr_cycle = 3;
- xd_card->zone_cnt = 1;
- xd_card->capacity = 8000;
- XD_SET_4MB(xd_card);
- break;
- case XD_8M_X8_512:
- xd_card->block_shift = 4;
- xd_card->page_off = 0x0F;
- xd_card->addr_cycle = 3;
- xd_card->zone_cnt = 1;
- xd_card->capacity = 16000;
- break;
- case XD_16M_X8_512:
- XD_PAGE_512(xd_card);
- xd_card->addr_cycle = 3;
- xd_card->zone_cnt = 1;
- xd_card->capacity = 32000;
- break;
- case XD_32M_X8_512:
- XD_PAGE_512(xd_card);
- xd_card->addr_cycle = 3;
- xd_card->zone_cnt = 2;
- xd_card->capacity = 64000;
- break;
- case XD_64M_X8_512:
- XD_PAGE_512(xd_card);
- xd_card->addr_cycle = 4;
- xd_card->zone_cnt = 4;
- xd_card->capacity = 128000;
- break;
- case XD_128M_X8_512:
- XD_PAGE_512(xd_card);
- xd_card->addr_cycle = 4;
- xd_card->zone_cnt = 8;
- xd_card->capacity = 256000;
- break;
- case XD_256M_X8_512:
- XD_PAGE_512(xd_card);
- xd_card->addr_cycle = 4;
- xd_card->zone_cnt = 16;
- xd_card->capacity = 512000;
- break;
- case XD_512M_X8:
- XD_PAGE_512(xd_card);
- xd_card->addr_cycle = 4;
- xd_card->zone_cnt = 32;
- xd_card->capacity = 1024000;
- break;
- case xD_1G_X8_512:
- XD_PAGE_512(xd_card);
- xd_card->addr_cycle = 4;
- xd_card->zone_cnt = 64;
- xd_card->capacity = 2048000;
- break;
- case xD_2G_X8_512:
- XD_PAGE_512(xd_card);
- xd_card->addr_cycle = 4;
- xd_card->zone_cnt = 128;
- xd_card->capacity = 4096000;
- break;
- default:
- continue;
- }
-
- /* Confirm timing setting */
- for (j = 0; j < 10; j++) {
- retval = xd_read_id(chip, READ_ID, id_buf, 4);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- if (id_buf[1] != xd_card->device_code)
- break;
- }
-
- if (j == 10)
- break;
- }
-
- if (i == 4) {
- xd_card->block_shift = 0;
- xd_card->page_off = 0;
- xd_card->addr_cycle = 0;
- xd_card->capacity = 0;
-
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- retval = xd_read_id(chip, READ_xD_ID, id_buf, 4);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
- RTSX_DEBUGP("READ_xD_ID: 0x%x 0x%x 0x%x 0x%x\n",
- id_buf[0], id_buf[1], id_buf[2], id_buf[3]);
- if (id_buf[2] != XD_ID_CODE)
- TRACE_RET(chip, STATUS_FAIL);
-
- /* Search CIS block */
- for (i = 0; i < 24; i++) {
- u32 page_addr;
-
- if (detect_card_cd(chip, XD_CARD) != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- page_addr = (u32)i << xd_card->block_shift;
-
- for (j = 0; j < 3; j++) {
- retval = xd_read_redundant(chip, page_addr, redunt, 11);
- if (retval == STATUS_SUCCESS)
- break;
- }
- if (j == 3)
- continue;
-
- if (redunt[BLOCK_STATUS] != XD_GBLK)
- continue;
-
- j = 0;
- if (redunt[PAGE_STATUS] != XD_GPG) {
- for (j = 1; j <= 8; j++) {
- retval = xd_read_redundant(chip, page_addr + j, redunt, 11);
- if (retval == STATUS_SUCCESS) {
- if (redunt[PAGE_STATUS] == XD_GPG)
- break;
- }
- }
-
- if (j == 9)
- break;
- }
-
- /* Check CIS data */
- if ((redunt[BLOCK_STATUS] == XD_GBLK) && (redunt[PARITY] & XD_BA1_ALL0)) {
- u8 buf[10];
-
- page_addr += j;
-
- retval = xd_read_cis(chip, page_addr, buf, 10);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- if ((buf[0] == 0x01) && (buf[1] == 0x03) && (buf[2] == 0xD9)
- && (buf[3] == 0x01) && (buf[4] == 0xFF)
- && (buf[5] == 0x18) && (buf[6] == 0x02)
- && (buf[7] == 0xDF) && (buf[8] == 0x01)
- && (buf[9] == 0x20)) {
- xd_card->cis_block = (u16)i;
- }
- }
-
- break;
- }
-
- RTSX_DEBUGP("CIS block: 0x%x\n", xd_card->cis_block);
- if (xd_card->cis_block == 0xFFFF)
- TRACE_RET(chip, STATUS_FAIL);
-
- chip->capacity[chip->card2lun[XD_CARD]] = xd_card->capacity;
-
- return STATUS_SUCCESS;
-}
-
-static int xd_check_data_blank(u8 *redunt)
-{
- int i;
-
- for (i = 0; i < 6; i++) {
- if (redunt[PAGE_STATUS + i] != 0xFF)
- return 0;
- }
-
- if ((redunt[PARITY] & (XD_ECC1_ALL1 | XD_ECC2_ALL1)) != (XD_ECC1_ALL1 | XD_ECC2_ALL1))
- return 0;
-
-
- for (i = 0; i < 4; i++) {
- if (redunt[RESERVED0 + i] != 0xFF)
- return 0;
- }
-
- return 1;
-}
-
-static u16 xd_load_log_block_addr(u8 *redunt)
-{
- u16 addr = 0xFFFF;
-
- if (redunt[PARITY] & XD_BA1_BA2_EQL)
- addr = ((u16)redunt[BLOCK_ADDR1_H] << 8) | redunt[BLOCK_ADDR1_L];
- else if (redunt[PARITY] & XD_BA1_VALID)
- addr = ((u16)redunt[BLOCK_ADDR1_H] << 8) | redunt[BLOCK_ADDR1_L];
- else if (redunt[PARITY] & XD_BA2_VALID)
- addr = ((u16)redunt[BLOCK_ADDR2_H] << 8) | redunt[BLOCK_ADDR2_L];
-
- return addr;
-}
-
-static int xd_init_l2p_tbl(struct rtsx_chip *chip)
-{
- struct xd_info *xd_card = &(chip->xd_card);
- int size, i;
-
- RTSX_DEBUGP("xd_init_l2p_tbl: zone_cnt = %d\n", xd_card->zone_cnt);
-
- if (xd_card->zone_cnt < 1)
- TRACE_RET(chip, STATUS_FAIL);
-
- size = xd_card->zone_cnt * sizeof(struct zone_entry);
- RTSX_DEBUGP("Buffer size for l2p table is %d\n", size);
-
- xd_card->zone = (struct zone_entry *)vmalloc(size);
- if (!xd_card->zone)
- TRACE_RET(chip, STATUS_ERROR);
-
- for (i = 0; i < xd_card->zone_cnt; i++) {
- xd_card->zone[i].build_flag = 0;
- xd_card->zone[i].l2p_table = NULL;
- xd_card->zone[i].free_table = NULL;
- xd_card->zone[i].get_index = 0;
- xd_card->zone[i].set_index = 0;
- xd_card->zone[i].unused_blk_cnt = 0;
- }
-
- return STATUS_SUCCESS;
-}
-
-static inline void free_zone(struct zone_entry *zone)
-{
- RTSX_DEBUGP("free_zone\n");
-
- if (!zone)
- return;
-
- zone->build_flag = 0;
- zone->set_index = 0;
- zone->get_index = 0;
- zone->unused_blk_cnt = 0;
- if (zone->l2p_table) {
- vfree(zone->l2p_table);
- zone->l2p_table = NULL;
- }
- if (zone->free_table) {
- vfree(zone->free_table);
- zone->free_table = NULL;
- }
-}
-
-static void xd_set_unused_block(struct rtsx_chip *chip, u32 phy_blk)
-{
- struct xd_info *xd_card = &(chip->xd_card);
- struct zone_entry *zone;
- int zone_no;
-
- zone_no = (int)phy_blk >> 10;
- if (zone_no >= xd_card->zone_cnt) {
- RTSX_DEBUGP("Set unused block to invalid zone (zone_no = %d, zone_cnt = %d)\n",
- zone_no, xd_card->zone_cnt);
- return;
- }
- zone = &(xd_card->zone[zone_no]);
-
- if (zone->free_table == NULL) {
- if (xd_build_l2p_tbl(chip, zone_no) != STATUS_SUCCESS)
- return;
- }
-
- if ((zone->set_index >= XD_FREE_TABLE_CNT)
- || (zone->set_index < 0)) {
- free_zone(zone);
- RTSX_DEBUGP("Set unused block fail, invalid set_index\n");
- return;
- }
-
- RTSX_DEBUGP("Set unused block to index %d\n", zone->set_index);
-
- zone->free_table[zone->set_index++] = (u16) (phy_blk & 0x3ff);
- if (zone->set_index >= XD_FREE_TABLE_CNT)
- zone->set_index = 0;
- zone->unused_blk_cnt++;
-}
-
-static u32 xd_get_unused_block(struct rtsx_chip *chip, int zone_no)
-{
- struct xd_info *xd_card = &(chip->xd_card);
- struct zone_entry *zone;
- u32 phy_blk;
-
- if (zone_no >= xd_card->zone_cnt) {
- RTSX_DEBUGP("Get unused block from invalid zone (zone_no = %d, zone_cnt = %d)\n",
- zone_no, xd_card->zone_cnt);
- return BLK_NOT_FOUND;
- }
- zone = &(xd_card->zone[zone_no]);
-
- if ((zone->unused_blk_cnt == 0) || (zone->set_index == zone->get_index)) {
- free_zone(zone);
- RTSX_DEBUGP("Get unused block fail, no unused block available\n");
- return BLK_NOT_FOUND;
- }
- if ((zone->get_index >= XD_FREE_TABLE_CNT) || (zone->get_index < 0)) {
- free_zone(zone);
- RTSX_DEBUGP("Get unused block fail, invalid get_index\n");
- return BLK_NOT_FOUND;
- }
-
- RTSX_DEBUGP("Get unused block from index %d\n", zone->get_index);
-
- phy_blk = zone->free_table[zone->get_index];
- zone->free_table[zone->get_index++] = 0xFFFF;
- if (zone->get_index >= XD_FREE_TABLE_CNT)
- zone->get_index = 0;
- zone->unused_blk_cnt--;
-
- phy_blk += ((u32)(zone_no) << 10);
- return phy_blk;
-}
-
-static void xd_set_l2p_tbl(struct rtsx_chip *chip, int zone_no, u16 log_off, u16 phy_off)
-{
- struct xd_info *xd_card = &(chip->xd_card);
- struct zone_entry *zone;
-
- zone = &(xd_card->zone[zone_no]);
- zone->l2p_table[log_off] = phy_off;
-}
-
-static u32 xd_get_l2p_tbl(struct rtsx_chip *chip, int zone_no, u16 log_off)
-{
- struct xd_info *xd_card = &(chip->xd_card);
- struct zone_entry *zone;
- int retval;
-
- zone = &(xd_card->zone[zone_no]);
- if (zone->l2p_table[log_off] == 0xFFFF) {
- u32 phy_blk = 0;
- int i;
-
-#ifdef XD_DELAY_WRITE
- retval = xd_delay_write(chip);
- if (retval != STATUS_SUCCESS) {
- RTSX_DEBUGP("In xd_get_l2p_tbl, delay write fail!\n");
- return BLK_NOT_FOUND;
- }
-#endif
-
- if (zone->unused_blk_cnt <= 0) {
- RTSX_DEBUGP("No unused block!\n");
- return BLK_NOT_FOUND;
- }
-
- for (i = 0; i < zone->unused_blk_cnt; i++) {
- phy_blk = xd_get_unused_block(chip, zone_no);
- if (phy_blk == BLK_NOT_FOUND) {
- RTSX_DEBUGP("No unused block available!\n");
- return BLK_NOT_FOUND;
- }
-
- retval = xd_init_page(chip, phy_blk, log_off, 0, xd_card->page_off + 1);
- if (retval == STATUS_SUCCESS)
- break;
- }
- if (i >= zone->unused_blk_cnt) {
- RTSX_DEBUGP("No good unused block available!\n");
- return BLK_NOT_FOUND;
- }
-
- xd_set_l2p_tbl(chip, zone_no, log_off, (u16)(phy_blk & 0x3FF));
- return phy_blk;
- }
-
- return (u32)zone->l2p_table[log_off] + ((u32)(zone_no) << 10);
-}
-
-int reset_xd_card(struct rtsx_chip *chip)
-{
- struct xd_info *xd_card = &(chip->xd_card);
- int retval;
-
- memset(xd_card, 0, sizeof(struct xd_info));
-
- xd_card->block_shift = 0;
- xd_card->page_off = 0;
- xd_card->addr_cycle = 0;
- xd_card->capacity = 0;
- xd_card->zone_cnt = 0;
- xd_card->cis_block = 0xFFFF;
- xd_card->delay_write.delay_write_flag = 0;
-
- retval = enable_card_clock(chip, XD_CARD);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- retval = reset_xd(chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- retval = xd_init_l2p_tbl(chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- return STATUS_SUCCESS;
-}
-
-static int xd_mark_bad_block(struct rtsx_chip *chip, u32 phy_blk)
-{
- struct xd_info *xd_card = &(chip->xd_card);
- int retval;
- u32 page_addr;
- u8 reg = 0;
-
- RTSX_DEBUGP("mark block 0x%x as bad block\n", phy_blk);
-
- if (phy_blk == BLK_NOT_FOUND)
- TRACE_RET(chip, STATUS_FAIL);
-
- rtsx_init_cmd(chip);
-
- rtsx_add_cmd(chip, WRITE_REG_CMD, XD_PAGE_STATUS, 0xFF, XD_GPG);
- rtsx_add_cmd(chip, WRITE_REG_CMD, XD_BLOCK_STATUS, 0xFF, XD_LATER_BBLK);
- rtsx_add_cmd(chip, WRITE_REG_CMD, XD_BLOCK_ADDR1_H, 0xFF, 0xFF);
- rtsx_add_cmd(chip, WRITE_REG_CMD, XD_BLOCK_ADDR1_L, 0xFF, 0xFF);
- rtsx_add_cmd(chip, WRITE_REG_CMD, XD_BLOCK_ADDR2_H, 0xFF, 0xFF);
- rtsx_add_cmd(chip, WRITE_REG_CMD, XD_BLOCK_ADDR2_L, 0xFF, 0xFF);
- rtsx_add_cmd(chip, WRITE_REG_CMD, XD_RESERVED0, 0xFF, 0xFF);
- rtsx_add_cmd(chip, WRITE_REG_CMD, XD_RESERVED1, 0xFF, 0xFF);
- rtsx_add_cmd(chip, WRITE_REG_CMD, XD_RESERVED2, 0xFF, 0xFF);
- rtsx_add_cmd(chip, WRITE_REG_CMD, XD_RESERVED3, 0xFF, 0xFF);
-
- page_addr = phy_blk << xd_card->block_shift;
-
- xd_assign_phy_addr(chip, page_addr, XD_RW_ADDR);
-
- rtsx_add_cmd(chip, WRITE_REG_CMD, XD_PAGE_CNT, 0xFF, xd_card->page_off + 1);
-
- rtsx_add_cmd(chip, WRITE_REG_CMD, XD_TRANSFER, 0xFF, XD_TRANSFER_START | XD_WRITE_REDUNDANT);
- rtsx_add_cmd(chip, CHECK_REG_CMD, XD_TRANSFER, XD_TRANSFER_END, XD_TRANSFER_END);
-
- retval = rtsx_send_cmd(chip, XD_CARD, 500);
- if (retval < 0) {
- rtsx_clear_xd_error(chip);
- rtsx_read_register(chip, XD_DAT, ®);
- if (reg & PROGRAM_ERROR)
- xd_set_err_code(chip, XD_PRG_ERROR);
- else
- xd_set_err_code(chip, XD_TO_ERROR);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- return STATUS_SUCCESS;
-}
-
-static int xd_init_page(struct rtsx_chip *chip, u32 phy_blk, u16 logoff, u8 start_page, u8 end_page)
-{
- struct xd_info *xd_card = &(chip->xd_card);
- int retval;
- u32 page_addr;
- u8 reg = 0;
-
- RTSX_DEBUGP("Init block 0x%x\n", phy_blk);
-
- if (start_page > end_page)
- TRACE_RET(chip, STATUS_FAIL);
- if (phy_blk == BLK_NOT_FOUND)
- TRACE_RET(chip, STATUS_FAIL);
-
- rtsx_init_cmd(chip);
-
- rtsx_add_cmd(chip, WRITE_REG_CMD, XD_PAGE_STATUS, 0xFF, 0xFF);
- rtsx_add_cmd(chip, WRITE_REG_CMD, XD_BLOCK_STATUS, 0xFF, 0xFF);
- rtsx_add_cmd(chip, WRITE_REG_CMD, XD_BLOCK_ADDR1_H, 0xFF, (u8)(logoff >> 8));
- rtsx_add_cmd(chip, WRITE_REG_CMD, XD_BLOCK_ADDR1_L, 0xFF, (u8)logoff);
-
- page_addr = (phy_blk << xd_card->block_shift) + start_page;
-
- xd_assign_phy_addr(chip, page_addr, XD_RW_ADDR);
-
- rtsx_add_cmd(chip, WRITE_REG_CMD, XD_CFG, XD_BA_TRANSFORM, XD_BA_TRANSFORM);
-
- rtsx_add_cmd(chip, WRITE_REG_CMD, XD_PAGE_CNT, 0xFF, (end_page - start_page));
-
- rtsx_add_cmd(chip, WRITE_REG_CMD, XD_TRANSFER, 0xFF, XD_TRANSFER_START | XD_WRITE_REDUNDANT);
- rtsx_add_cmd(chip, CHECK_REG_CMD, XD_TRANSFER, XD_TRANSFER_END, XD_TRANSFER_END);
-
- retval = rtsx_send_cmd(chip, XD_CARD, 500);
- if (retval < 0) {
- rtsx_clear_xd_error(chip);
- rtsx_read_register(chip, XD_DAT, ®);
- if (reg & PROGRAM_ERROR) {
- xd_mark_bad_block(chip, phy_blk);
- xd_set_err_code(chip, XD_PRG_ERROR);
- } else {
- xd_set_err_code(chip, XD_TO_ERROR);
- }
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- return STATUS_SUCCESS;
-}
-
-static int xd_copy_page(struct rtsx_chip *chip, u32 old_blk, u32 new_blk, u8 start_page, u8 end_page)
-{
- struct xd_info *xd_card = &(chip->xd_card);
- u32 old_page, new_page;
- u8 i, reg = 0;
- int retval;
-
- RTSX_DEBUGP("Copy page from block 0x%x to block 0x%x\n", old_blk, new_blk);
-
- if (start_page > end_page)
- TRACE_RET(chip, STATUS_FAIL);
-
- if ((old_blk == BLK_NOT_FOUND) || (new_blk == BLK_NOT_FOUND))
- TRACE_RET(chip, STATUS_FAIL);
-
- old_page = (old_blk << xd_card->block_shift) + start_page;
- new_page = (new_blk << xd_card->block_shift) + start_page;
-
- XD_CLR_BAD_NEWBLK(xd_card);
-
- RTSX_WRITE_REG(chip, CARD_DATA_SOURCE, 0x01, PINGPONG_BUFFER);
-
- for (i = start_page; i < end_page; i++) {
- if (detect_card_cd(chip, XD_CARD) != STATUS_SUCCESS) {
- rtsx_clear_xd_error(chip);
- xd_set_err_code(chip, XD_NO_CARD);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- rtsx_init_cmd(chip);
-
- xd_assign_phy_addr(chip, old_page, XD_RW_ADDR);
-
- rtsx_add_cmd(chip, WRITE_REG_CMD, XD_PAGE_CNT, 0xFF, 1);
- rtsx_add_cmd(chip, WRITE_REG_CMD, XD_CHK_DATA_STATUS, XD_AUTO_CHK_DATA_STATUS, 0);
- rtsx_add_cmd(chip, WRITE_REG_CMD, XD_TRANSFER, 0xFF, XD_TRANSFER_START | XD_READ_PAGES);
- rtsx_add_cmd(chip, CHECK_REG_CMD, XD_TRANSFER, XD_TRANSFER_END, XD_TRANSFER_END);
-
- retval = rtsx_send_cmd(chip, XD_CARD, 500);
- if (retval < 0) {
- rtsx_clear_xd_error(chip);
- reg = 0;
- rtsx_read_register(chip, XD_CTL, ®);
- if (reg & (XD_ECC1_ERROR | XD_ECC2_ERROR)) {
- wait_timeout(100);
-
- if (detect_card_cd(chip, XD_CARD) != STATUS_SUCCESS) {
- xd_set_err_code(chip, XD_NO_CARD);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- if (((reg & (XD_ECC1_ERROR | XD_ECC1_UNCORRECTABLE)) ==
- (XD_ECC1_ERROR | XD_ECC1_UNCORRECTABLE))
- || ((reg & (XD_ECC2_ERROR | XD_ECC2_UNCORRECTABLE)) ==
- (XD_ECC2_ERROR | XD_ECC2_UNCORRECTABLE))) {
- rtsx_write_register(chip, XD_PAGE_STATUS, 0xFF, XD_BPG);
- rtsx_write_register(chip, XD_BLOCK_STATUS, 0xFF, XD_GBLK);
- XD_SET_BAD_OLDBLK(xd_card);
- RTSX_DEBUGP("old block 0x%x ecc error\n", old_blk);
- }
- } else {
- xd_set_err_code(chip, XD_TO_ERROR);
- TRACE_RET(chip, STATUS_FAIL);
- }
- }
-
- if (XD_CHK_BAD_OLDBLK(xd_card))
- rtsx_clear_xd_error(chip);
-
- rtsx_init_cmd(chip);
-
- xd_assign_phy_addr(chip, new_page, XD_RW_ADDR);
- rtsx_add_cmd(chip, WRITE_REG_CMD, XD_PAGE_CNT, 0xFF, 1);
- rtsx_add_cmd(chip, WRITE_REG_CMD, XD_TRANSFER, 0xFF,
- XD_TRANSFER_START | XD_WRITE_PAGES);
- rtsx_add_cmd(chip, CHECK_REG_CMD, XD_TRANSFER, XD_TRANSFER_END, XD_TRANSFER_END);
-
- retval = rtsx_send_cmd(chip, XD_CARD, 300);
- if (retval < 0) {
- rtsx_clear_xd_error(chip);
- reg = 0;
- rtsx_read_register(chip, XD_DAT, ®);
- if (reg & PROGRAM_ERROR) {
- xd_mark_bad_block(chip, new_blk);
- xd_set_err_code(chip, XD_PRG_ERROR);
- XD_SET_BAD_NEWBLK(xd_card);
- } else {
- xd_set_err_code(chip, XD_TO_ERROR);
- }
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- old_page++;
- new_page++;
- }
-
- return STATUS_SUCCESS;
-}
-
-static int xd_reset_cmd(struct rtsx_chip *chip)
-{
- int retval;
- u8 *ptr;
-
- rtsx_init_cmd(chip);
-
- rtsx_add_cmd(chip, WRITE_REG_CMD, XD_TRANSFER, 0xFF, XD_TRANSFER_START | XD_RESET);
- rtsx_add_cmd(chip, CHECK_REG_CMD, XD_TRANSFER, XD_TRANSFER_END, XD_TRANSFER_END);
- rtsx_add_cmd(chip, READ_REG_CMD, XD_DAT, 0, 0);
- rtsx_add_cmd(chip, READ_REG_CMD, XD_CTL, 0, 0);
-
- retval = rtsx_send_cmd(chip, XD_CARD, 100);
- if (retval < 0)
- TRACE_RET(chip, STATUS_FAIL);
-
- ptr = rtsx_get_cmd_data(chip) + 1;
- if (((ptr[0] & READY_FLAG) == READY_STATE) && (ptr[1] & XD_RDY))
- return STATUS_SUCCESS;
-
- TRACE_RET(chip, STATUS_FAIL);
-}
-
-static int xd_erase_block(struct rtsx_chip *chip, u32 phy_blk)
-{
- struct xd_info *xd_card = &(chip->xd_card);
- u32 page_addr;
- u8 reg = 0, *ptr;
- int i, retval;
-
- if (phy_blk == BLK_NOT_FOUND)
- TRACE_RET(chip, STATUS_FAIL);
-
- page_addr = phy_blk << xd_card->block_shift;
-
- for (i = 0; i < 3; i++) {
- rtsx_init_cmd(chip);
-
- xd_assign_phy_addr(chip, page_addr, XD_ERASE_ADDR);
-
- rtsx_add_cmd(chip, WRITE_REG_CMD, XD_TRANSFER, 0xFF, XD_TRANSFER_START | XD_ERASE);
- rtsx_add_cmd(chip, CHECK_REG_CMD, XD_TRANSFER, XD_TRANSFER_END, XD_TRANSFER_END);
- rtsx_add_cmd(chip, READ_REG_CMD, XD_DAT, 0, 0);
-
- retval = rtsx_send_cmd(chip, XD_CARD, 250);
- if (retval < 0) {
- rtsx_clear_xd_error(chip);
- rtsx_read_register(chip, XD_DAT, ®);
- if (reg & PROGRAM_ERROR) {
- xd_mark_bad_block(chip, phy_blk);
- xd_set_err_code(chip, XD_PRG_ERROR);
- TRACE_RET(chip, STATUS_FAIL);
- } else {
- xd_set_err_code(chip, XD_ERASE_FAIL);
- }
- retval = xd_reset_cmd(chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
- continue;
- }
-
- ptr = rtsx_get_cmd_data(chip) + 1;
- if (*ptr & PROGRAM_ERROR) {
- xd_mark_bad_block(chip, phy_blk);
- xd_set_err_code(chip, XD_PRG_ERROR);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- return STATUS_SUCCESS;
- }
-
- xd_mark_bad_block(chip, phy_blk);
- xd_set_err_code(chip, XD_ERASE_FAIL);
- TRACE_RET(chip, STATUS_FAIL);
-}
-
-
-static int xd_build_l2p_tbl(struct rtsx_chip *chip, int zone_no)
-{
- struct xd_info *xd_card = &(chip->xd_card);
- struct zone_entry *zone;
- int retval;
- u32 start, end, i;
- u16 max_logoff, cur_fst_page_logoff, cur_lst_page_logoff, ent_lst_page_logoff;
- u8 redunt[11];
-
- RTSX_DEBUGP("xd_build_l2p_tbl: %d\n", zone_no);
-
- if (xd_card->zone == NULL) {
- retval = xd_init_l2p_tbl(chip);
- if (retval != STATUS_SUCCESS)
- return retval;
- }
-
- if (xd_card->zone[zone_no].build_flag) {
- RTSX_DEBUGP("l2p table of zone %d has been built\n", zone_no);
- return STATUS_SUCCESS;
- }
-
- zone = &(xd_card->zone[zone_no]);
-
- if (zone->l2p_table == NULL) {
- zone->l2p_table = (u16 *)vmalloc(2000);
- if (zone->l2p_table == NULL)
- TRACE_GOTO(chip, Build_Fail);
- }
- memset((u8 *)(zone->l2p_table), 0xff, 2000);
-
- if (zone->free_table == NULL) {
- zone->free_table = (u16 *)vmalloc(XD_FREE_TABLE_CNT * 2);
- if (zone->free_table == NULL)
- TRACE_GOTO(chip, Build_Fail);
- }
- memset((u8 *)(zone->free_table), 0xff, XD_FREE_TABLE_CNT * 2);
-
- if (zone_no == 0) {
- if (xd_card->cis_block == 0xFFFF)
- start = 0;
- else
- start = xd_card->cis_block + 1;
- if (XD_CHK_4MB(xd_card)) {
- end = 0x200;
- max_logoff = 499;
- } else {
- end = 0x400;
- max_logoff = 999;
- }
- } else {
- start = (u32)(zone_no) << 10;
- end = (u32)(zone_no + 1) << 10;
- max_logoff = 999;
- }
-
- RTSX_DEBUGP("start block 0x%x, end block 0x%x\n", start, end);
-
- zone->set_index = zone->get_index = 0;
- zone->unused_blk_cnt = 0;
-
- for (i = start; i < end; i++) {
- u32 page_addr = i << xd_card->block_shift;
- u32 phy_block;
-
- retval = xd_read_redundant(chip, page_addr, redunt, 11);
- if (retval != STATUS_SUCCESS)
- continue;
-
- if (redunt[BLOCK_STATUS] != 0xFF) {
- RTSX_DEBUGP("bad block\n");
- continue;
- }
-
- if (xd_check_data_blank(redunt)) {
- RTSX_DEBUGP("blank block\n");
- xd_set_unused_block(chip, i);
- continue;
- }
-
- cur_fst_page_logoff = xd_load_log_block_addr(redunt);
- if ((cur_fst_page_logoff == 0xFFFF) || (cur_fst_page_logoff > max_logoff)) {
- retval = xd_erase_block(chip, i);
- if (retval == STATUS_SUCCESS)
- xd_set_unused_block(chip, i);
- continue;
- }
-
- if ((zone_no == 0) && (cur_fst_page_logoff == 0) && (redunt[PAGE_STATUS] != XD_GPG))
- XD_SET_MBR_FAIL(xd_card);
-
- if (zone->l2p_table[cur_fst_page_logoff] == 0xFFFF) {
- zone->l2p_table[cur_fst_page_logoff] = (u16)(i & 0x3FF);
- continue;
- }
-
- phy_block = zone->l2p_table[cur_fst_page_logoff] + ((u32)((zone_no) << 10));
-
- page_addr = ((i + 1) << xd_card->block_shift) - 1;
-
- retval = xd_read_redundant(chip, page_addr, redunt, 11);
- if (retval != STATUS_SUCCESS)
- continue;
-
- cur_lst_page_logoff = xd_load_log_block_addr(redunt);
- if (cur_lst_page_logoff == cur_fst_page_logoff) {
- int m;
-
- page_addr = ((phy_block + 1) << xd_card->block_shift) - 1;
-
- for (m = 0; m < 3; m++) {
- retval = xd_read_redundant(chip, page_addr, redunt, 11);
- if (retval == STATUS_SUCCESS)
- break;
- }
-
- if (m == 3) {
- zone->l2p_table[cur_fst_page_logoff] = (u16)(i & 0x3FF);
- retval = xd_erase_block(chip, phy_block);
- if (retval == STATUS_SUCCESS)
- xd_set_unused_block(chip, phy_block);
- continue;
- }
-
- ent_lst_page_logoff = xd_load_log_block_addr(redunt);
- if (ent_lst_page_logoff != cur_fst_page_logoff) {
- zone->l2p_table[cur_fst_page_logoff] = (u16)(i & 0x3FF);
- retval = xd_erase_block(chip, phy_block);
- if (retval == STATUS_SUCCESS)
- xd_set_unused_block(chip, phy_block);
- continue;
- } else {
- retval = xd_erase_block(chip, i);
- if (retval == STATUS_SUCCESS)
- xd_set_unused_block(chip, i);
- }
- } else {
- retval = xd_erase_block(chip, i);
- if (retval == STATUS_SUCCESS)
- xd_set_unused_block(chip, i);
- }
- }
-
- if (XD_CHK_4MB(xd_card))
- end = 500;
- else
- end = 1000;
-
- i = 0;
- for (start = 0; start < end; start++) {
- if (zone->l2p_table[start] == 0xFFFF)
- i++;
- }
-
- RTSX_DEBUGP("Block count %d, invalid L2P entry %d\n", end, i);
- RTSX_DEBUGP("Total unused block: %d\n", zone->unused_blk_cnt);
-
- if ((zone->unused_blk_cnt - i) < 1)
- chip->card_wp |= XD_CARD;
-
- zone->build_flag = 1;
-
- return STATUS_SUCCESS;
-
-Build_Fail:
- if (zone->l2p_table) {
- vfree(zone->l2p_table);
- zone->l2p_table = NULL;
- }
- if (zone->free_table) {
- vfree(zone->free_table);
- zone->free_table = NULL;
- }
-
- return STATUS_FAIL;
-}
-
-static int xd_send_cmd(struct rtsx_chip *chip, u8 cmd)
-{
- int retval;
-
- rtsx_init_cmd(chip);
-
- rtsx_add_cmd(chip, WRITE_REG_CMD, XD_DAT, 0xFF, cmd);
- rtsx_add_cmd(chip, WRITE_REG_CMD, XD_TRANSFER, 0xFF, XD_TRANSFER_START | XD_SET_CMD);
- rtsx_add_cmd(chip, CHECK_REG_CMD, XD_TRANSFER, XD_TRANSFER_END, XD_TRANSFER_END);
-
- retval = rtsx_send_cmd(chip, XD_CARD, 200);
- if (retval < 0)
- TRACE_RET(chip, STATUS_FAIL);
-
- return STATUS_SUCCESS;
-}
-
-static int xd_read_multiple_pages(struct rtsx_chip *chip, u32 phy_blk, u32 log_blk,
- u8 start_page, u8 end_page, u8 *buf, unsigned int *index, unsigned int *offset)
-{
- struct xd_info *xd_card = &(chip->xd_card);
- u32 page_addr, new_blk;
- u16 log_off;
- u8 reg_val, page_cnt;
- int zone_no, retval, i;
-
- if (start_page > end_page)
- TRACE_RET(chip, STATUS_FAIL);
-
- page_cnt = end_page - start_page;
- zone_no = (int)(log_blk / 1000);
- log_off = (u16)(log_blk % 1000);
-
- if ((phy_blk & 0x3FF) == 0x3FF) {
- for (i = 0; i < 256; i++) {
- page_addr = ((u32)i) << xd_card->block_shift;
-
- retval = xd_read_redundant(chip, page_addr, NULL, 0);
- if (retval == STATUS_SUCCESS)
- break;
-
- if (detect_card_cd(chip, XD_CARD) != STATUS_SUCCESS) {
- xd_set_err_code(chip, XD_NO_CARD);
- TRACE_RET(chip, STATUS_FAIL);
- }
- }
- }
-
- page_addr = (phy_blk << xd_card->block_shift) + start_page;
-
- rtsx_init_cmd(chip);
-
- xd_assign_phy_addr(chip, page_addr, XD_RW_ADDR);
- rtsx_add_cmd(chip, WRITE_REG_CMD, XD_CFG, XD_PPB_TO_SIE, XD_PPB_TO_SIE);
- rtsx_add_cmd(chip, WRITE_REG_CMD, CARD_DATA_SOURCE, 0x01, RING_BUFFER);
- rtsx_add_cmd(chip, WRITE_REG_CMD, XD_PAGE_CNT, 0xFF, page_cnt);
- rtsx_add_cmd(chip, WRITE_REG_CMD, XD_CHK_DATA_STATUS,
- XD_AUTO_CHK_DATA_STATUS, XD_AUTO_CHK_DATA_STATUS);
-
- trans_dma_enable(chip->srb->sc_data_direction, chip, page_cnt * 512, DMA_512);
-
- rtsx_add_cmd(chip, WRITE_REG_CMD, XD_TRANSFER, 0xFF, XD_TRANSFER_START | XD_READ_PAGES);
- rtsx_add_cmd(chip, CHECK_REG_CMD, XD_TRANSFER,
- XD_TRANSFER_END | XD_PPB_EMPTY, XD_TRANSFER_END | XD_PPB_EMPTY);
-
- rtsx_send_cmd_no_wait(chip);
-
- retval = rtsx_transfer_data_partial(chip, XD_CARD, buf, page_cnt * 512, scsi_sg_count(chip->srb),
- index, offset, DMA_FROM_DEVICE, chip->xd_timeout);
- if (retval < 0) {
- rtsx_clear_xd_error(chip);
- xd_clear_dma_buffer(chip);
-
- if (retval == -ETIMEDOUT) {
- xd_set_err_code(chip, XD_TO_ERROR);
- TRACE_RET(chip, STATUS_FAIL);
- } else {
- TRACE_GOTO(chip, Fail);
- }
- }
-
- return STATUS_SUCCESS;
-
-Fail:
- RTSX_READ_REG(chip, XD_PAGE_STATUS, ®_val);
-
- if (reg_val != XD_GPG)
- xd_set_err_code(chip, XD_PRG_ERROR);
-
- RTSX_READ_REG(chip, XD_CTL, ®_val);
-
- if (((reg_val & (XD_ECC1_ERROR | XD_ECC1_UNCORRECTABLE))
- == (XD_ECC1_ERROR | XD_ECC1_UNCORRECTABLE))
- || ((reg_val & (XD_ECC2_ERROR | XD_ECC2_UNCORRECTABLE))
- == (XD_ECC2_ERROR | XD_ECC2_UNCORRECTABLE))) {
- wait_timeout(100);
-
- if (detect_card_cd(chip, XD_CARD) != STATUS_SUCCESS) {
- xd_set_err_code(chip, XD_NO_CARD);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- xd_set_err_code(chip, XD_ECC_ERROR);
-
- new_blk = xd_get_unused_block(chip, zone_no);
- if (new_blk == NO_NEW_BLK) {
- XD_CLR_BAD_OLDBLK(xd_card);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- retval = xd_copy_page(chip, phy_blk, new_blk, 0, xd_card->page_off + 1);
- if (retval != STATUS_SUCCESS) {
- if (!XD_CHK_BAD_NEWBLK(xd_card)) {
- retval = xd_erase_block(chip, new_blk);
- if (retval == STATUS_SUCCESS)
- xd_set_unused_block(chip, new_blk);
- } else {
- XD_CLR_BAD_NEWBLK(xd_card);
- }
- XD_CLR_BAD_OLDBLK(xd_card);
- TRACE_RET(chip, STATUS_FAIL);
- }
- xd_set_l2p_tbl(chip, zone_no, log_off, (u16)(new_blk & 0x3FF));
- xd_erase_block(chip, phy_blk);
- xd_mark_bad_block(chip, phy_blk);
- XD_CLR_BAD_OLDBLK(xd_card);
- }
-
- TRACE_RET(chip, STATUS_FAIL);
-}
-
-static int xd_finish_write(struct rtsx_chip *chip,
- u32 old_blk, u32 new_blk, u32 log_blk, u8 page_off)
-{
- struct xd_info *xd_card = &(chip->xd_card);
- int retval, zone_no;
- u16 log_off;
-
- RTSX_DEBUGP("xd_finish_write, old_blk = 0x%x, new_blk = 0x%x, log_blk = 0x%x\n",
- old_blk, new_blk, log_blk);
-
- if (page_off > xd_card->page_off)
- TRACE_RET(chip, STATUS_FAIL);
-
- zone_no = (int)(log_blk / 1000);
- log_off = (u16)(log_blk % 1000);
-
- if (old_blk == BLK_NOT_FOUND) {
- retval = xd_init_page(chip, new_blk, log_off,
- page_off, xd_card->page_off + 1);
- if (retval != STATUS_SUCCESS) {
- retval = xd_erase_block(chip, new_blk);
- if (retval == STATUS_SUCCESS)
- xd_set_unused_block(chip, new_blk);
- TRACE_RET(chip, STATUS_FAIL);
- }
- } else {
- retval = xd_copy_page(chip, old_blk, new_blk,
- page_off, xd_card->page_off + 1);
- if (retval != STATUS_SUCCESS) {
- if (!XD_CHK_BAD_NEWBLK(xd_card)) {
- retval = xd_erase_block(chip, new_blk);
- if (retval == STATUS_SUCCESS)
- xd_set_unused_block(chip, new_blk);
- }
- XD_CLR_BAD_NEWBLK(xd_card);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- retval = xd_erase_block(chip, old_blk);
- if (retval == STATUS_SUCCESS) {
- if (XD_CHK_BAD_OLDBLK(xd_card)) {
- xd_mark_bad_block(chip, old_blk);
- XD_CLR_BAD_OLDBLK(xd_card);
- } else {
- xd_set_unused_block(chip, old_blk);
- }
- } else {
- xd_set_err_code(chip, XD_NO_ERROR);
- XD_CLR_BAD_OLDBLK(xd_card);
- }
- }
-
- xd_set_l2p_tbl(chip, zone_no, log_off, (u16)(new_blk & 0x3FF));
-
- return STATUS_SUCCESS;
-}
-
-static int xd_prepare_write(struct rtsx_chip *chip,
- u32 old_blk, u32 new_blk, u32 log_blk, u8 page_off)
-{
- int retval;
-
- RTSX_DEBUGP("%s, old_blk = 0x%x, new_blk = 0x%x, log_blk = 0x%x, page_off = %d\n",
- __func__, old_blk, new_blk, log_blk, (int)page_off);
-
- if (page_off) {
- retval = xd_copy_page(chip, old_blk, new_blk, 0, page_off);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- return STATUS_SUCCESS;
-}
-
-
-static int xd_write_multiple_pages(struct rtsx_chip *chip, u32 old_blk, u32 new_blk, u32 log_blk,
- u8 start_page, u8 end_page, u8 *buf, unsigned int *index, unsigned int *offset)
-{
- struct xd_info *xd_card = &(chip->xd_card);
- u32 page_addr;
- int zone_no, retval;
- u16 log_off;
- u8 page_cnt, reg_val;
-
- RTSX_DEBUGP("%s, old_blk = 0x%x, new_blk = 0x%x, log_blk = 0x%x\n",
- __func__, old_blk, new_blk, log_blk);
-
- if (start_page > end_page)
- TRACE_RET(chip, STATUS_FAIL);
-
- page_cnt = end_page - start_page;
- zone_no = (int)(log_blk / 1000);
- log_off = (u16)(log_blk % 1000);
-
- page_addr = (new_blk << xd_card->block_shift) + start_page;
-
- retval = xd_send_cmd(chip, READ1_1);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- rtsx_init_cmd(chip);
-
- rtsx_add_cmd(chip, WRITE_REG_CMD, XD_BLOCK_ADDR1_H, 0xFF, (u8)(log_off >> 8));
- rtsx_add_cmd(chip, WRITE_REG_CMD, XD_BLOCK_ADDR1_L, 0xFF, (u8)log_off);
- rtsx_add_cmd(chip, WRITE_REG_CMD, XD_BLOCK_STATUS, 0xFF, XD_GBLK);
- rtsx_add_cmd(chip, WRITE_REG_CMD, XD_PAGE_STATUS, 0xFF, XD_GPG);
-
- xd_assign_phy_addr(chip, page_addr, XD_RW_ADDR);
-
- rtsx_add_cmd(chip, WRITE_REG_CMD, XD_CFG, XD_BA_TRANSFORM, XD_BA_TRANSFORM);
- rtsx_add_cmd(chip, WRITE_REG_CMD, XD_PAGE_CNT, 0xFF, page_cnt);
- rtsx_add_cmd(chip, WRITE_REG_CMD, CARD_DATA_SOURCE, 0x01, RING_BUFFER);
-
- trans_dma_enable(chip->srb->sc_data_direction, chip, page_cnt * 512, DMA_512);
-
- rtsx_add_cmd(chip, WRITE_REG_CMD, XD_TRANSFER, 0xFF, XD_TRANSFER_START | XD_WRITE_PAGES);
- rtsx_add_cmd(chip, CHECK_REG_CMD, XD_TRANSFER, XD_TRANSFER_END, XD_TRANSFER_END);
-
- rtsx_send_cmd_no_wait(chip);
-
- retval = rtsx_transfer_data_partial(chip, XD_CARD, buf, page_cnt * 512, scsi_sg_count(chip->srb),
- index, offset, DMA_TO_DEVICE, chip->xd_timeout);
- if (retval < 0) {
- rtsx_clear_xd_error(chip);
-
- if (retval == -ETIMEDOUT) {
- xd_set_err_code(chip, XD_TO_ERROR);
- TRACE_RET(chip, STATUS_FAIL);
- } else {
- TRACE_GOTO(chip, Fail);
- }
- }
-
- if (end_page == (xd_card->page_off + 1)) {
- xd_card->delay_write.delay_write_flag = 0;
-
- if (old_blk != BLK_NOT_FOUND) {
- retval = xd_erase_block(chip, old_blk);
- if (retval == STATUS_SUCCESS) {
- if (XD_CHK_BAD_OLDBLK(xd_card)) {
- xd_mark_bad_block(chip, old_blk);
- XD_CLR_BAD_OLDBLK(xd_card);
- } else {
- xd_set_unused_block(chip, old_blk);
- }
- } else {
- xd_set_err_code(chip, XD_NO_ERROR);
- XD_CLR_BAD_OLDBLK(xd_card);
- }
- }
- xd_set_l2p_tbl(chip, zone_no, log_off, (u16)(new_blk & 0x3FF));
- }
-
- return STATUS_SUCCESS;
-
-Fail:
- RTSX_READ_REG(chip, XD_DAT, ®_val);
- if (reg_val & PROGRAM_ERROR) {
- xd_set_err_code(chip, XD_PRG_ERROR);
- xd_mark_bad_block(chip, new_blk);
- }
-
- TRACE_RET(chip, STATUS_FAIL);
-}
-
-#ifdef XD_DELAY_WRITE
-int xd_delay_write(struct rtsx_chip *chip)
-{
- struct xd_info *xd_card = &(chip->xd_card);
- struct xd_delay_write_tag *delay_write = &(xd_card->delay_write);
- int retval;
-
- if (delay_write->delay_write_flag) {
- RTSX_DEBUGP("xd_delay_write\n");
- retval = xd_switch_clock(chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- delay_write->delay_write_flag = 0;
- retval = xd_finish_write(chip,
- delay_write->old_phyblock, delay_write->new_phyblock,
- delay_write->logblock, delay_write->pageoff);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- return STATUS_SUCCESS;
-}
-#endif
-
-int xd_rw(struct scsi_cmnd *srb, struct rtsx_chip *chip, u32 start_sector, u16 sector_cnt)
-{
- struct xd_info *xd_card = &(chip->xd_card);
- unsigned int lun = SCSI_LUN(srb);
-#ifdef XD_DELAY_WRITE
- struct xd_delay_write_tag *delay_write = &(xd_card->delay_write);
-#endif
- int retval, zone_no;
- unsigned int index = 0, offset = 0;
- u32 log_blk, old_blk = 0, new_blk = 0;
- u16 log_off, total_sec_cnt = sector_cnt;
- u8 start_page, end_page = 0, page_cnt;
- u8 *ptr;
-
- xd_set_err_code(chip, XD_NO_ERROR);
-
- xd_card->cleanup_counter = 0;
-
- RTSX_DEBUGP("xd_rw: scsi_sg_count = %d\n", scsi_sg_count(srb));
-
- ptr = (u8 *)scsi_sglist(srb);
-
- retval = xd_switch_clock(chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
-
- if (detect_card_cd(chip, XD_CARD) != STATUS_SUCCESS) {
- chip->card_fail |= XD_CARD;
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_NOT_PRESENT);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- log_blk = start_sector >> xd_card->block_shift;
- start_page = (u8)start_sector & xd_card->page_off;
- zone_no = (int)(log_blk / 1000);
- log_off = (u16)(log_blk % 1000);
-
- if (xd_card->zone[zone_no].build_flag == 0) {
- retval = xd_build_l2p_tbl(chip, zone_no);
- if (retval != STATUS_SUCCESS) {
- chip->card_fail |= XD_CARD;
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_NOT_PRESENT);
- TRACE_RET(chip, STATUS_FAIL);
- }
- }
-
- if (srb->sc_data_direction == DMA_TO_DEVICE) {
-#ifdef XD_DELAY_WRITE
- if (delay_write->delay_write_flag &&
- (delay_write->logblock == log_blk) &&
- (start_page > delay_write->pageoff)) {
- delay_write->delay_write_flag = 0;
- if (delay_write->old_phyblock != BLK_NOT_FOUND) {
- retval = xd_copy_page(chip,
- delay_write->old_phyblock,
- delay_write->new_phyblock,
- delay_write->pageoff, start_page);
- if (retval != STATUS_SUCCESS) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_WRITE_ERR);
- TRACE_RET(chip, STATUS_FAIL);
- }
- }
- old_blk = delay_write->old_phyblock;
- new_blk = delay_write->new_phyblock;
- } else if (delay_write->delay_write_flag &&
- (delay_write->logblock == log_blk) &&
- (start_page == delay_write->pageoff)) {
- delay_write->delay_write_flag = 0;
- old_blk = delay_write->old_phyblock;
- new_blk = delay_write->new_phyblock;
- } else {
- retval = xd_delay_write(chip);
- if (retval != STATUS_SUCCESS) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_WRITE_ERR);
- TRACE_RET(chip, STATUS_FAIL);
- }
-#endif
- old_blk = xd_get_l2p_tbl(chip, zone_no, log_off);
- new_blk = xd_get_unused_block(chip, zone_no);
- if ((old_blk == BLK_NOT_FOUND) || (new_blk == BLK_NOT_FOUND)) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_WRITE_ERR);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- retval = xd_prepare_write(chip, old_blk, new_blk, log_blk, start_page);
- if (retval != STATUS_SUCCESS) {
- if (detect_card_cd(chip, XD_CARD) != STATUS_SUCCESS) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_NOT_PRESENT);
- TRACE_RET(chip, STATUS_FAIL);
- }
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_WRITE_ERR);
- TRACE_RET(chip, STATUS_FAIL);
- }
-#ifdef XD_DELAY_WRITE
- }
-#endif
- } else {
-#ifdef XD_DELAY_WRITE
- retval = xd_delay_write(chip);
- if (retval != STATUS_SUCCESS) {
- if (detect_card_cd(chip, XD_CARD) != STATUS_SUCCESS) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_NOT_PRESENT);
- TRACE_RET(chip, STATUS_FAIL);
- }
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_UNRECOVER_READ_ERR);
- TRACE_RET(chip, STATUS_FAIL);
- }
-#endif
-
- old_blk = xd_get_l2p_tbl(chip, zone_no, log_off);
- if (old_blk == BLK_NOT_FOUND) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_UNRECOVER_READ_ERR);
- TRACE_RET(chip, STATUS_FAIL);
- }
- }
-
- RTSX_DEBUGP("old_blk = 0x%x\n", old_blk);
-
- while (total_sec_cnt) {
- if (detect_card_cd(chip, XD_CARD) != STATUS_SUCCESS) {
- chip->card_fail |= XD_CARD;
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_NOT_PRESENT);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- if ((start_page + total_sec_cnt) > (xd_card->page_off + 1))
- end_page = xd_card->page_off + 1;
- else
- end_page = start_page + (u8)total_sec_cnt;
-
- page_cnt = end_page - start_page;
- if (srb->sc_data_direction == DMA_FROM_DEVICE) {
- retval = xd_read_multiple_pages(chip, old_blk, log_blk,
- start_page, end_page, ptr, &index, &offset);
- if (retval != STATUS_SUCCESS) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_UNRECOVER_READ_ERR);
- TRACE_RET(chip, STATUS_FAIL);
- }
- } else {
- retval = xd_write_multiple_pages(chip, old_blk, new_blk, log_blk,
- start_page, end_page, ptr, &index, &offset);
- if (retval != STATUS_SUCCESS) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_WRITE_ERR);
- TRACE_RET(chip, STATUS_FAIL);
- }
- }
-
- total_sec_cnt -= page_cnt;
- if (scsi_sg_count(srb) == 0)
- ptr += page_cnt * 512;
-
- if (total_sec_cnt == 0)
- break;
-
- log_blk++;
- zone_no = (int)(log_blk / 1000);
- log_off = (u16)(log_blk % 1000);
-
- if (xd_card->zone[zone_no].build_flag == 0) {
- retval = xd_build_l2p_tbl(chip, zone_no);
- if (retval != STATUS_SUCCESS) {
- chip->card_fail |= XD_CARD;
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_NOT_PRESENT);
- TRACE_RET(chip, STATUS_FAIL);
- }
- }
-
- old_blk = xd_get_l2p_tbl(chip, zone_no, log_off);
- if (old_blk == BLK_NOT_FOUND) {
- if (srb->sc_data_direction == DMA_FROM_DEVICE)
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_UNRECOVER_READ_ERR);
- else
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_WRITE_ERR);
-
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- if (srb->sc_data_direction == DMA_TO_DEVICE) {
- new_blk = xd_get_unused_block(chip, zone_no);
- if (new_blk == BLK_NOT_FOUND) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_WRITE_ERR);
- TRACE_RET(chip, STATUS_FAIL);
- }
- }
-
- start_page = 0;
- }
-
- if ((srb->sc_data_direction == DMA_TO_DEVICE) &&
- (end_page != (xd_card->page_off + 1))) {
-#ifdef XD_DELAY_WRITE
- delay_write->delay_write_flag = 1;
- delay_write->old_phyblock = old_blk;
- delay_write->new_phyblock = new_blk;
- delay_write->logblock = log_blk;
- delay_write->pageoff = end_page;
-#else
- if (detect_card_cd(chip, XD_CARD) != STATUS_SUCCESS) {
- chip->card_fail |= XD_CARD;
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_NOT_PRESENT);
- TRACE_RET(chip, STATUS_FAIL);
- }
-
- retval = xd_finish_write(chip, old_blk, new_blk, log_blk, end_page);
- if (retval != STATUS_SUCCESS) {
- if (detect_card_cd(chip, XD_CARD) != STATUS_SUCCESS) {
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_NOT_PRESENT);
- TRACE_RET(chip, STATUS_FAIL);
- }
- set_sense_type(chip, lun, SENSE_TYPE_MEDIA_WRITE_ERR);
- TRACE_RET(chip, STATUS_FAIL);
- }
-#endif
- }
-
- scsi_set_resid(srb, 0);
-
- return STATUS_SUCCESS;
-}
-
-void xd_free_l2p_tbl(struct rtsx_chip *chip)
-{
- struct xd_info *xd_card = &(chip->xd_card);
- int i = 0;
-
- if (xd_card->zone != NULL) {
- for (i = 0; i < xd_card->zone_cnt; i++) {
- if (xd_card->zone[i].l2p_table != NULL) {
- vfree(xd_card->zone[i].l2p_table);
- xd_card->zone[i].l2p_table = NULL;
- }
- if (xd_card->zone[i].free_table != NULL) {
- vfree(xd_card->zone[i].free_table);
- xd_card->zone[i].free_table = NULL;
- }
- }
- vfree(xd_card->zone);
- xd_card->zone = NULL;
- }
-}
-
-void xd_cleanup_work(struct rtsx_chip *chip)
-{
-#ifdef XD_DELAY_WRITE
- struct xd_info *xd_card = &(chip->xd_card);
-
- if (xd_card->delay_write.delay_write_flag) {
- RTSX_DEBUGP("xD: delay write\n");
- xd_delay_write(chip);
- xd_card->cleanup_counter = 0;
- }
-#endif
-}
-
-int xd_power_off_card3v3(struct rtsx_chip *chip)
-{
- int retval;
-
- retval = disable_card_clock(chip, XD_CARD);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- RTSX_WRITE_REG(chip, CARD_OE, XD_OUTPUT_EN, 0);
-
- if (!chip->ft2_fast_mode) {
- retval = card_power_off(chip, XD_CARD);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- wait_timeout(50);
- }
-
- if (chip->asic_code) {
- retval = xd_pull_ctl_disable(chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
- } else {
- RTSX_WRITE_REG(chip, FPGA_PULL_CTL, 0xFF, 0xDF);
- }
-
- return STATUS_SUCCESS;
-}
-
-int release_xd_card(struct rtsx_chip *chip)
-{
- struct xd_info *xd_card = &(chip->xd_card);
- int retval;
-
- RTSX_DEBUGP("release_xd_card\n");
-
- chip->card_ready &= ~XD_CARD;
- chip->card_fail &= ~XD_CARD;
- chip->card_wp &= ~XD_CARD;
-
- xd_card->delay_write.delay_write_flag = 0;
-
- xd_free_l2p_tbl(chip);
-
- retval = xd_power_off_card3v3(chip);
- if (retval != STATUS_SUCCESS)
- TRACE_RET(chip, STATUS_FAIL);
-
- return STATUS_SUCCESS;
-}
diff --git a/drivers/staging/rts_pstor/xd.h b/drivers/staging/rts_pstor/xd.h
deleted file mode 100644
index cd9fbc1..0000000
--- a/drivers/staging/rts_pstor/xd.h
+++ /dev/null
@@ -1,188 +0,0 @@
-/* Driver for Realtek PCI-Express card reader
- * Header file
- *
- * Copyright(c) 2009 Realtek Semiconductor Corp. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, see <http://www.gnu.org/licenses/>.
- *
- * Author:
- * wwang (wei_wang@realsil.com.cn)
- * No. 450, Shenhu Road, Suzhou Industry Park, Suzhou, China
- */
-
-#ifndef __REALTEK_RTSX_XD_H
-#define __REALTEK_RTSX_XD_H
-
-#define XD_DELAY_WRITE
-
-/* Error Codes */
-#define XD_NO_ERROR 0x00
-#define XD_NO_MEMORY 0x80
-#define XD_PRG_ERROR 0x40
-#define XD_NO_CARD 0x20
-#define XD_READ_FAIL 0x10
-#define XD_ERASE_FAIL 0x08
-#define XD_WRITE_FAIL 0x04
-#define XD_ECC_ERROR 0x02
-#define XD_TO_ERROR 0x01
-
-/* XD Commands */
-#define READ1_1 0x00
-#define READ1_2 0x01
-#define READ2 0x50
-#define READ_ID 0x90
-#define RESET 0xff
-#define PAGE_PRG_1 0x80
-#define PAGE_PRG_2 0x10
-#define BLK_ERASE_1 0x60
-#define BLK_ERASE_2 0xD0
-#define READ_STS 0x70
-#define READ_xD_ID 0x9A
-#define COPY_BACK_512 0x8A
-#define COPY_BACK_2K 0x85
-#define READ1_1_2 0x30
-#define READ1_1_3 0x35
-#define CHG_DAT_OUT_1 0x05
-#define RDM_DAT_OUT_1 0x05
-#define CHG_DAT_OUT_2 0xE0
-#define RDM_DAT_OUT_2 0xE0
-#define CHG_DAT_OUT_2 0xE0
-#define CHG_DAT_IN_1 0x85
-#define CACHE_PRG 0x15
-
-/* Redundant Area Related */
-#define XD_EXTRA_SIZE 0x10
-#define XD_2K_EXTRA_SIZE 0x40
-
-#define NOT_WRITE_PROTECTED 0x80
-#define READY_STATE 0x40
-#define PROGRAM_ERROR 0x01
-#define PROGRAM_ERROR_N_1 0x02
-#define INTERNAL_READY 0x20
-#define READY_FLAG 0x5F
-
-#define XD_8M_X8_512 0xE6
-#define XD_16M_X8_512 0x73
-#define XD_32M_X8_512 0x75
-#define XD_64M_X8_512 0x76
-#define XD_128M_X8_512 0x79
-#define XD_256M_X8_512 0x71
-#define XD_128M_X8_2048 0xF1
-#define XD_256M_X8_2048 0xDA
-#define XD_512M_X8 0xDC
-#define XD_128M_X16_2048 0xC1
-#define XD_4M_X8_512_1 0xE3
-#define XD_4M_X8_512_2 0xE5
-#define xD_1G_X8_512 0xD3
-#define xD_2G_X8_512 0xD5
-
-#define XD_ID_CODE 0xB5
-
-#define VENDOR_BLOCK 0xEFFF
-#define CIS_BLOCK 0xDFFF
-
-#define BLK_NOT_FOUND 0xFFFFFFFF
-
-#define NO_NEW_BLK 0xFFFFFFFF
-
-#define PAGE_CORRECTABLE 0x0
-#define PAGE_NOTCORRECTABLE 0x1
-
-#define NO_OFFSET 0x0
-#define WITH_OFFSET 0x1
-
-#define Sect_Per_Page 4
-#define XD_ADDR_MODE_2C XD_ADDR_MODE_2A
-
-#define ZONE0_BAD_BLOCK 23
-#define NOT_ZONE0_BAD_BLOCK 24
-
-#define XD_RW_ADDR 0x01
-#define XD_ERASE_ADDR 0x02
-
-#define XD_PAGE_512(xd_card) \
-do { \
- (xd_card)->block_shift = 5; \
- (xd_card)->page_off = 0x1F; \
-} while (0)
-
-#define XD_SET_BAD_NEWBLK(xd_card) ((xd_card)->multi_flag |= 0x01)
-#define XD_CLR_BAD_NEWBLK(xd_card) ((xd_card)->multi_flag &= ~0x01)
-#define XD_CHK_BAD_NEWBLK(xd_card) ((xd_card)->multi_flag & 0x01)
-
-#define XD_SET_BAD_OLDBLK(xd_card) ((xd_card)->multi_flag |= 0x02)
-#define XD_CLR_BAD_OLDBLK(xd_card) ((xd_card)->multi_flag &= ~0x02)
-#define XD_CHK_BAD_OLDBLK(xd_card) ((xd_card)->multi_flag & 0x02)
-
-#define XD_SET_MBR_FAIL(xd_card) ((xd_card)->multi_flag |= 0x04)
-#define XD_CLR_MBR_FAIL(xd_card) ((xd_card)->multi_flag &= ~0x04)
-#define XD_CHK_MBR_FAIL(xd_card) ((xd_card)->multi_flag & 0x04)
-
-#define XD_SET_ECC_FLD_ERR(xd_card) ((xd_card)->multi_flag |= 0x08)
-#define XD_CLR_ECC_FLD_ERR(xd_card) ((xd_card)->multi_flag &= ~0x08)
-#define XD_CHK_ECC_FLD_ERR(xd_card) ((xd_card)->multi_flag & 0x08)
-
-#define XD_SET_4MB(xd_card) ((xd_card)->multi_flag |= 0x10)
-#define XD_CLR_4MB(xd_card) ((xd_card)->multi_flag &= ~0x10)
-#define XD_CHK_4MB(xd_card) ((xd_card)->multi_flag & 0x10)
-
-#define XD_SET_ECC_ERR(xd_card) ((xd_card)->multi_flag |= 0x40)
-#define XD_CLR_ECC_ERR(xd_card) ((xd_card)->multi_flag &= ~0x40)
-#define XD_CHK_ECC_ERR(xd_card) ((xd_card)->multi_flag & 0x40)
-
-#define PAGE_STATUS 0
-#define BLOCK_STATUS 1
-#define BLOCK_ADDR1_L 2
-#define BLOCK_ADDR1_H 3
-#define BLOCK_ADDR2_L 4
-#define BLOCK_ADDR2_H 5
-#define RESERVED0 6
-#define RESERVED1 7
-#define RESERVED2 8
-#define RESERVED3 9
-#define PARITY 10
-
-#define CIS0_0 0
-#define CIS0_1 1
-#define CIS0_2 2
-#define CIS0_3 3
-#define CIS0_4 4
-#define CIS0_5 5
-#define CIS0_6 6
-#define CIS0_7 7
-#define CIS0_8 8
-#define CIS0_9 9
-#define CIS1_0 256
-#define CIS1_1 (256 + 1)
-#define CIS1_2 (256 + 2)
-#define CIS1_3 (256 + 3)
-#define CIS1_4 (256 + 4)
-#define CIS1_5 (256 + 5)
-#define CIS1_6 (256 + 6)
-#define CIS1_7 (256 + 7)
-#define CIS1_8 (256 + 8)
-#define CIS1_9 (256 + 9)
-
-int reset_xd_card(struct rtsx_chip *chip);
-#ifdef XD_DELAY_WRITE
-int xd_delay_write(struct rtsx_chip *chip);
-#endif
-int xd_rw(struct scsi_cmnd *srb, struct rtsx_chip *chip, u32 start_sector, u16 sector_cnt);
-void xd_free_l2p_tbl(struct rtsx_chip *chip);
-void xd_cleanup_work(struct rtsx_chip *chip);
-int xd_power_off_card3v3(struct rtsx_chip *chip);
-int release_xd_card(struct rtsx_chip *chip);
-
-#endif /* __REALTEK_RTSX_XD_H */
-
diff --git a/drivers/staging/sb105x/Kconfig b/drivers/staging/sb105x/Kconfig
new file mode 100644
index 0000000..ac87c5e
--- /dev/null
+++ b/drivers/staging/sb105x/Kconfig
@@ -0,0 +1,9 @@
+config SB105X
+ tristate "SystemBase PCI Multiport UART"
+ select SERIAL_CORE
+ depends on PCI
+ help
+ A driver for the SystemBase Multi-2/PCI serial card
+
+ To compile this driver a module, choose M here: the module
+ will be called "sb105x".
diff --git a/drivers/staging/sb105x/Makefile b/drivers/staging/sb105x/Makefile
new file mode 100644
index 0000000..b1bf377
--- /dev/null
+++ b/drivers/staging/sb105x/Makefile
@@ -0,0 +1,3 @@
+obj-$(CONFIG_SB105X) += sb105x.o
+
+sb105x-y := sb_pci_mp.o
diff --git a/drivers/staging/sb105x/sb_mp_register.h b/drivers/staging/sb105x/sb_mp_register.h
new file mode 100644
index 0000000..5480ae1
--- /dev/null
+++ b/drivers/staging/sb105x/sb_mp_register.h
@@ -0,0 +1,295 @@
+
+/*
+ * SB105X_UART.h
+ *
+ * Copyright (C) 2008 systembase
+ *
+ * UART registers.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef UART_SB105X_H
+#define UART_SB105X_H
+
+/*
+ * option register
+ */
+
+/* Device Infomation Register */
+#define MP_OPTR_DIR0 0x04 /* port0 ~ port8 */
+#define MP_OPTR_DIR1 0x05 /* port8 ~ port15 */
+#define MP_OPTR_DIR2 0x06 /* port16 ~ port23 */
+#define MP_OPTR_DIR3 0x07 /* port24 ~ port31 */
+
+#define DIR_UART_16C550 0
+#define DIR_UART_16C1050 1
+#define DIR_UART_16C1050A 2
+
+#define DIR_CLK_1843200 0x0 /* input clock 1843200 Hz */
+#define DIR_CLK_3686400 0x1 /* input clock 3686400 Hz */
+#define DIR_CLK_7372800 0x2 /* input clock 7372800 Hz */
+#define DIR_CLK_14745600 0x3 /* input clock 14745600 Hz */
+#define DIR_CLK_29491200 0x4 /* input clock 29491200 Hz */
+#define DIR_CLK_58985400 0x5 /* input clock 58985400 Hz */
+
+/* Interface Information Register */
+#define MP_OPTR_IIR0 0x08 /* port0 ~ port8 */
+#define MP_OPTR_IIR1 0x09 /* port8 ~ port15 */
+#define MP_OPTR_IIR2 0x0A /* port16 ~ port23 */
+#define MP_OPTR_IIR3 0x0B /* port24 ~ port31 */
+
+#define IIR_RS232 0x00 /* RS232 type */
+#define IIR_RS422 0x10 /* RS422 type */
+#define IIR_RS485 0x20 /* RS485 type */
+#define IIR_UNKNOWN 0x30 /* unknown type */
+
+/* Interrrupt Mask Register */
+#define MP_OPTR_IMR0 0x0C /* port0 ~ port8 */
+#define MP_OPTR_IMR1 0x0D /* port8 ~ port15 */
+#define MP_OPTR_IMR2 0x0E /* port16 ~ port23 */
+#define MP_OPTR_IMR3 0x0F /* port24 ~ port31 */
+
+/* Interrupt Poll Register */
+#define MP_OPTR_IPR0 0x10 /* port0 ~ port8 */
+#define MP_OPTR_IPR1 0x11 /* port8 ~ port15 */
+#define MP_OPTR_IPR2 0x12 /* port16 ~ port23 */
+#define MP_OPTR_IPR3 0x13 /* port24 ~ port31 */
+
+/* General Purpose Output Control Register */
+#define MP_OPTR_GPOCR 0x20
+
+/* General Purpose Output Data Register */
+#define MP_OPTR_GPODR 0x21
+
+/* Parallel Additional Function Register */
+#define MP_OPTR_PAFR 0x23
+
+/*
+ * systembase 16c105x UART register
+ */
+
+#define PAGE_0 0
+#define PAGE_1 1
+#define PAGE_2 2
+#define PAGE_3 3
+#define PAGE_4 4
+
+/*
+ * ******************************************************************
+ * * DLAB=0 =============== Page 0 Registers *
+ * ******************************************************************
+ */
+
+#define SB105X_RX 0 /* In: Receive buffer */
+#define SB105X_TX 0 /* Out: Transmit buffer */
+
+#define SB105X_IER 1 /* Out: Interrupt Enable Register */
+
+#define SB105X_IER_CTSI 0x80 /* CTS# Interrupt Enable (Requires EFR[4] = 1) */
+#define SB105X_IER_RTSI 0x40 /* RTS# Interrupt Enable (Requires EFR[4] = 1) */
+#define SB105X_IER_XOI 0x20 /* Xoff Interrupt Enable (Requires EFR[4] = 1) */
+#define SB105X_IER_SME 0x10 /* Sleep Mode Enable (Requires EFR[4] = 1) */
+#define SB105X_IER_MSI 0x08 /* Enable Modem status interrupt */
+#define SB105X_IER_RLSI 0x04 /* Enable receiver line status interrupt */
+#define SB105X_IER_THRI 0x02 /* Enable Transmitter holding register int. */
+#define SB105X_IER_RDI 0x01 /* Enable receiver data interrupt */
+
+#define SB105X_ISR 2 /* In: Interrupt ID Register */
+
+#define SB105X_ISR_NOINT 0x01 /* No interrupts pending */
+#define SB105X_ISR_RLSI 0x06 /* Receiver line status interrupt (Priority = 1)*/
+#define SB105X_ISR_RDAI 0x0c /* Receive Data Available interrupt */
+#define SB105X_ISR_CTII 0x04 /* Character Timeout Indication interrupt */
+#define SB105X_ISR_THRI 0x02 /* Transmitter holding register empty */
+#define SB105X_ISR_MSI 0x00 /* Modem status interrupt */
+#define SB105X_ISR_RXCI 0x10 /* Receive Xoff or Special Character interrupt */
+#define SB105X_ISR_RCSI 0x20 /* RTS#, CTS# status interrupt during Auto RTS/CTS flow control */
+
+#define SB105X_FCR 2 /* Out: FIFO Control Register */
+
+#define SB105X_FCR_FEN 0x01 /* FIFO Enable */
+#define SB105X_FCR_RXFR 0x02 /* RX FIFO Reset */
+#define SB105X_FCR_TXFR 0x04 /* TX FIFO Reset */
+#define SB105X_FCR_DMS 0x08 /* DMA Mode Select */
+
+#define SB105X_FCR_RTR08 0x00 /* Receice Trigger Level set at 8 */
+#define SB105X_FCR_RTR16 0x40 /* Receice Trigger Level set at 16 */
+#define SB105X_FCR_RTR56 0x80 /* Receice Trigger Level set at 56 */
+#define SB105X_FCR_RTR60 0xc0 /* Receice Trigger Level set at 60 */
+#define SB105X_FCR_TTR08 0x00 /* Transmit Trigger Level set at 8 */
+#define SB105X_FCR_TTR16 0x10 /* Transmit Trigger Level set at 16 */
+#define SB105X_FCR_TTR32 0x20 /* Transmit Trigger Level set at 32 */
+#define SB105X_FCR_TTR56 0x30 /* Transmit Trigger Level set at 56 */
+
+#define SB105X_LCR 3 /* Out: Line Control Register */
+/*
+ * * Note: if the word length is 5 bits (SB105X_LCR_WLEN5), then setting
+ * * SB105X_LCR_STOP will select 1.5 stop bits, not 2 stop bits.
+ */
+#define SB105X_LCR_DLAB 0x80 /* Divisor Latch Enable */
+#define SB105X_LCR_SBC 0x40 /* Break Enable*/
+#define SB105X_LCR_SPAR 0x20 /* Set Stick parity */
+#define SB105X_LCR_EPAR 0x10 /* Even parity select */
+#define SB105X_LCR_PAREN 0x08 /* Parity Enable */
+#define SB105X_LCR_STOP 0x04 /* Stop bits: 0->1 bit, 1->2 bits, 1 and SB105X_LCR_WLEN5 -> 1.5 bit */
+#define SB105X_LCR_WLEN5 0x00 /* Wordlength: 5 bits */
+#define SB105X_LCR_WLEN6 0x01 /* Wordlength: 6 bits */
+#define SB105X_LCR_WLEN7 0x02 /* Wordlength: 7 bits */
+#define SB105X_LCR_WLEN8 0x03 /* Wordlength: 8 bits */
+
+#define SB105X_LCR_BF 0xBF
+
+#define SB105X_MCR 4 /* Out: Modem Control Register */
+#define SB105X_MCR_CPS 0x80 /* Clock Prescaler Select */
+#define SB105X_MCR_P2S 0x40 /* Page 2 Select /Xoff Re-Transmit Access Enable */
+#define SB105X_MCR_XOA 0x20 /* Xon Any Enable */
+#define SB105X_MCR_ILB 0x10 /* Internal Loopback Enable */
+#define SB105X_MCR_OUT2 0x08 /* Out2/Interrupt Output Enable*/
+#define SB105X_MCR_OUT1 0x04 /* Out1/Interrupt Output Enable */
+#define SB105X_MCR_RTS 0x02 /* RTS# Output */
+#define SB105X_MCR_DTR 0x01 /* DTR# Output */
+
+#define SB105X_LSR 5 /* In: Line Status Register */
+#define SB105X_LSR_RFEI 0x80 /* Receive FIFO data error Indicator */
+#define SB105X_LSR_TEMI 0x40 /* THR and TSR Empty Indicator */
+#define SB105X_LSR_THRE 0x20 /* THR Empty Indicator */
+#define SB105X_LSR_BII 0x10 /* Break interrupt indicator */
+#define SB105X_LSR_FEI 0x08 /* Frame error indicator */
+#define SB105X_LSR_PEI 0x04 /* Parity error indicator */
+#define SB105X_LSR_OEI 0x02 /* Overrun error indicator */
+#define SB105X_LSR_RDRI 0x01 /* Receive data ready Indicator*/
+
+#define SB105X_MSR 6 /* In: Modem Status Register */
+#define SB105X_MSR_DCD 0x80 /* Data Carrier Detect */
+#define SB105X_MSR_RI 0x40 /* Ring Indicator */
+#define SB105X_MSR_DSR 0x20 /* Data Set Ready */
+#define SB105X_MSR_CTS 0x10 /* Clear to Send */
+#define SB105X_MSR_DDCD 0x08 /* Delta DCD */
+#define SB105X_MSR_DRI 0x04 /* Delta ring indicator */
+#define SB105X_MSR_DDSR 0x02 /* Delta DSR */
+#define SB105X_MSR_DCTS 0x01 /* Delta CTS */
+
+#define SB105XA_MDR 6 /* Out: Multi Drop mode Register */
+#define SB105XA_MDR_NPS 0x08 /* 9th Bit Polarity Select */
+#define SB105XA_MDR_AME 0x02 /* Auto Multi-drop Enable */
+#define SB105XA_MDR_MDE 0x01 /* Multi Drop Enable */
+
+#define SB105X_SPR 7 /* I/O: Scratch Register */
+
+/*
+ * DLAB=1
+ */
+#define SB105X_DLL 0 /* Out: Divisor Latch Low */
+#define SB105X_DLM 1 /* Out: Divisor Latch High */
+
+/*
+ * ******************************************************************
+ * * DLAB(LCR[7]) = 0 , MCR[6] = 1 ============= Page 2 Registers *
+ * ******************************************************************
+ */
+#define SB105X_GICR 1 /* Global Interrupt Control Register */
+#define SB105X_GICR_GIM 0x01 /* Global Interrupt Mask */
+
+#define SB105X_GISR 2 /* Global Interrupt Status Register */
+#define SB105X_GISR_MGICR0 0x80 /* Mirror the content of GICR[0] */
+#define SB105X_GISR_CS3IS 0x08 /* SB105X of CS3# Interrupt Status */
+#define SB105X_GISR_CS2IS 0x04 /* SB105X of CS2# Interrupt Status */
+#define SB105X_GISR_CS1IS 0x02 /* SB105X of CS1# Interrupt Status */
+#define SB105X_GISR_CS0IS 0x01 /* SB105X of CS0# Interrupt Status */
+
+#define SB105X_TFCR 5 /* Transmit FIFO Count Register */
+
+#define SB105X_RFCR 6 /* Receive FIFO Count Register */
+
+#define SB105X_FSR 7 /* Flow Control Status Register */
+#define SB105X_FSR_THFS 0x20 /* Transmit Hardware Flow Control Status */
+#define SB105X_FSR_TSFS 0x10 /* Transmit Software Flow Control Status */
+#define SB105X_FSR_RHFS 0x02 /* Receive Hardware Flow Control Status */
+#define SB105X_FSR_RSFS 0x01 /* Receive Software Flow Control Status */
+
+/*
+ * ******************************************************************
+ * * LCR = 0xBF, PSR[0] = 0 ============= Page 3 Registers *
+ * ******************************************************************
+ */
+
+#define SB105X_PSR 0 /* Page Select Register */
+#define SB105X_PSR_P3KEY 0xA4 /* Page 3 Select Key */
+#define SB105X_PSR_P4KEY 0xA5 /* Page 5 Select Key */
+
+#define SB105X_ATR 1 /* Auto Toggle Control Register */
+#define SB105X_ATR_RPS 0x80 /* RXEN Polarity Select */
+#define SB105X_ATR_RCMS 0x40 /* RXEN Control Mode Select */
+#define SB105X_ATR_TPS 0x20 /* TXEN Polarity Select */
+#define SB105X_ATR_TCMS 0x10 /* TXEN Control Mode Select */
+#define SB105X_ATR_ATDIS 0x00 /* Auto Toggle is disabled */
+#define SB105X_ATR_ART 0x01 /* RTS#/TXEN pin operates as TXEN */
+#define SB105X_ATR_ADT 0x02 /* DTR#/TXEN pin operates as TXEN */
+#define SB105X_ATR_A80 0x03 /* only in 80 pin use */
+
+#define SB105X_EFR 2 /* (Auto) Enhanced Feature Register */
+#define SB105X_EFR_ACTS 0x80 /* Auto-CTS Flow Control Enable */
+#define SB105X_EFR_ARTS 0x40 /* Auto-RTS Flow Control Enable */
+#define SB105X_EFR_SCD 0x20 /* Special Character Detect */
+#define SB105X_EFR_EFBEN 0x10 /* Enhanced Function Bits Enable */
+
+#define SB105X_XON1 4 /* Xon1 Character Register */
+#define SB105X_XON2 5 /* Xon2 Character Register */
+#define SB105X_XOFF1 6 /* Xoff1 Character Register */
+#define SB105X_XOFF2 7 /* Xoff2 Character Register */
+
+/*
+ * ******************************************************************
+ * * LCR = 0xBF, PSR[0] = 1 ============ Page 4 Registers *
+ * ******************************************************************
+ */
+
+#define SB105X_AFR 1 /* Additional Feature Register */
+#define SB105X_AFR_GIPS 0x20 /* Global Interrupt Polarity Select */
+#define SB105X_AFR_GIEN 0x10 /* Global Interrupt Enable */
+#define SB105X_AFR_AFEN 0x01 /* 256-byte FIFO Enable */
+
+#define SB105X_XRCR 2 /* Xoff Re-transmit Count Register */
+#define SB105X_XRCR_NRC1 0x00 /* Transmits Xoff Character whenever the number of received data is 1 during XOFF status */
+#define SB105X_XRCR_NRC4 0x01 /* Transmits Xoff Character whenever the number of received data is 4 during XOFF status */
+#define SB105X_XRCR_NRC8 0x02 /* Transmits Xoff Character whenever the number of received data is 8 during XOFF status */
+#define SB105X_XRCR_NRC16 0x03 /* Transmits Xoff Character whenever the number of received data is 16 during XOFF status */
+
+#define SB105X_TTR 4 /* Transmit FIFO Trigger Level Register */
+#define SB105X_RTR 5 /* Receive FIFO Trigger Level Register */
+#define SB105X_FUR 6 /* Flow Control Upper Threshold Register */
+#define SB105X_FLR 7 /* Flow Control Lower Threshold Register */
+
+
+/* page 0 */
+
+#define SB105X_GET_CHAR(port) inb((port)->iobase + SB105X_RX)
+#define SB105X_GET_IER(port) inb((port)->iobase + SB105X_IER)
+#define SB105X_GET_ISR(port) inb((port)->iobase + SB105X_ISR)
+#define SB105X_GET_LCR(port) inb((port)->iobase + SB105X_LCR)
+#define SB105X_GET_MCR(port) inb((port)->iobase + SB105X_MCR)
+#define SB105X_GET_LSR(port) inb((port)->iobase + SB105X_LSR)
+#define SB105X_GET_MSR(port) inb((port)->iobase + SB105X_MSR)
+#define SB105X_GET_SPR(port) inb((port)->iobase + SB105X_SPR)
+
+#define SB105X_PUT_CHAR(port,v) outb((v),(port)->iobase + SB105X_TX )
+#define SB105X_PUT_IER(port,v) outb((v),(port)->iobase + SB105X_IER )
+#define SB105X_PUT_FCR(port,v) outb((v),(port)->iobase + SB105X_FCR )
+#define SB105X_PUT_LCR(port,v) outb((v),(port)->iobase + SB105X_LCR )
+#define SB105X_PUT_MCR(port,v) outb((v),(port)->iobase + SB105X_MCR )
+#define SB105X_PUT_SPR(port,v) outb((v),(port)->iobase + SB105X_SPR )
+
+
+/* page 1 */
+#define SB105X_GET_REG(port,reg) inb((port)->iobase + (reg))
+#define SB105X_PUT_REG(port,reg,v) outb((v),(port)->iobase + (reg))
+
+/* page 2 */
+
+#define SB105X_PUT_PSR(port,v) outb((v),(port)->iobase + SB105X_PSR )
+
+#endif
diff --git a/drivers/staging/sb105x/sb_pci_mp.c b/drivers/staging/sb105x/sb_pci_mp.c
new file mode 100644
index 0000000..edb2a85
--- /dev/null
+++ b/drivers/staging/sb105x/sb_pci_mp.c
@@ -0,0 +1,3196 @@
+#include "sb_pci_mp.h"
+#include <linux/module.h>
+#include <linux/parport.h>
+
+extern struct parport *parport_pc_probe_port(unsigned long base_lo,
+ unsigned long base_hi,
+ int irq, int dma,
+ struct device *dev,
+ int irqflags);
+
+static struct mp_device_t mp_devs[MAX_MP_DEV];
+static int mp_nrpcibrds = sizeof(mp_pciboards)/sizeof(mppcibrd_t);
+static int NR_BOARD=0;
+static int NR_PORTS=0;
+static struct mp_port multi_ports[MAX_MP_PORT];
+static struct irq_info irq_lists[NR_IRQS];
+
+static _INLINE_ unsigned int serial_in(struct mp_port *mtpt, int offset);
+static _INLINE_ void serial_out(struct mp_port *mtpt, int offset, int value);
+static _INLINE_ unsigned int read_option_register(struct mp_port *mtpt, int offset);
+static int sb1054_get_register(struct sb_uart_port * port, int page, int reg);
+static int sb1054_set_register(struct sb_uart_port * port, int page, int reg, int value);
+static void SendATCommand(struct mp_port * mtpt);
+static int set_deep_fifo(struct sb_uart_port * port, int status);
+static int get_deep_fifo(struct sb_uart_port * port);
+static int get_device_type(int arg);
+static int set_auto_rts(struct sb_uart_port *port, int status);
+static void mp_stop(struct tty_struct *tty);
+static void __mp_start(struct tty_struct *tty);
+static void mp_start(struct tty_struct *tty);
+static void mp_tasklet_action(unsigned long data);
+static inline void mp_update_mctrl(struct sb_uart_port *port, unsigned int set, unsigned int clear);
+static int mp_startup(struct sb_uart_state *state, int init_hw);
+static void mp_shutdown(struct sb_uart_state *state);
+static void mp_change_speed(struct sb_uart_state *state, struct MP_TERMIOS *old_termios);
+
+static inline int __mp_put_char(struct sb_uart_port *port, struct circ_buf *circ, unsigned char c);
+static int mp_put_char(struct tty_struct *tty, unsigned char ch);
+
+static void mp_put_chars(struct tty_struct *tty);
+static int mp_write(struct tty_struct *tty, const unsigned char * buf, int count);
+static int mp_write_room(struct tty_struct *tty);
+static int mp_chars_in_buffer(struct tty_struct *tty);
+static void mp_flush_buffer(struct tty_struct *tty);
+static void mp_send_xchar(struct tty_struct *tty, char ch);
+static void mp_throttle(struct tty_struct *tty);
+static void mp_unthrottle(struct tty_struct *tty);
+static int mp_get_info(struct sb_uart_state *state, struct serial_struct *retinfo);
+static int mp_set_info(struct sb_uart_state *state, struct serial_struct *newinfo);
+static int mp_get_lsr_info(struct sb_uart_state *state, unsigned int *value);
+
+static int mp_tiocmget(struct tty_struct *tty);
+static int mp_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear);
+static int mp_break_ctl(struct tty_struct *tty, int break_state);
+static int mp_do_autoconfig(struct sb_uart_state *state);
+static int mp_wait_modem_status(struct sb_uart_state *state, unsigned long arg);
+static int mp_get_count(struct sb_uart_state *state, struct serial_icounter_struct *icnt);
+static int mp_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg);
+static void mp_set_termios(struct tty_struct *tty, struct MP_TERMIOS *old_termios);
+static void mp_close(struct tty_struct *tty, struct file *filp);
+static void mp_wait_until_sent(struct tty_struct *tty, int timeout);
+static void mp_hangup(struct tty_struct *tty);
+static void mp_update_termios(struct sb_uart_state *state);
+static int mp_block_til_ready(struct file *filp, struct sb_uart_state *state);
+static struct sb_uart_state *uart_get(struct uart_driver *drv, int line);
+static int mp_open(struct tty_struct *tty, struct file *filp);
+static const char *mp_type(struct sb_uart_port *port);
+static void mp_change_pm(struct sb_uart_state *state, int pm_state);
+static inline void mp_report_port(struct uart_driver *drv, struct sb_uart_port *port);
+static void mp_configure_port(struct uart_driver *drv, struct sb_uart_state *state, struct sb_uart_port *port);
+static void mp_unconfigure_port(struct uart_driver *drv, struct sb_uart_state *state);
+static int mp_register_driver(struct uart_driver *drv);
+static void mp_unregister_driver(struct uart_driver *drv);
+static int mp_add_one_port(struct uart_driver *drv, struct sb_uart_port *port);
+static int mp_remove_one_port(struct uart_driver *drv, struct sb_uart_port *port);
+static void autoconfig(struct mp_port *mtpt, unsigned int probeflags);
+static void autoconfig_irq(struct mp_port *mtpt);
+static void multi_stop_tx(struct sb_uart_port *port);
+static void multi_start_tx(struct sb_uart_port *port);
+static void multi_stop_rx(struct sb_uart_port *port);
+static void multi_enable_ms(struct sb_uart_port *port);
+static _INLINE_ void receive_chars(struct mp_port *mtpt, int *status );
+static _INLINE_ void transmit_chars(struct mp_port *mtpt);
+static _INLINE_ void check_modem_status(struct mp_port *mtpt);
+static inline void multi_handle_port(struct mp_port *mtpt);
+static irqreturn_t multi_interrupt(int irq, void *dev_id);
+static void serial_do_unlink(struct irq_info *i, struct mp_port *mtpt);
+static int serial_link_irq_chain(struct mp_port *mtpt);
+static void serial_unlink_irq_chain(struct mp_port *mtpt);
+static void multi_timeout(unsigned long data);
+static unsigned int multi_tx_empty(struct sb_uart_port *port);
+static unsigned int multi_get_mctrl(struct sb_uart_port *port);
+static void multi_set_mctrl(struct sb_uart_port *port, unsigned int mctrl);
+static void multi_break_ctl(struct sb_uart_port *port, int break_state);
+static int multi_startup(struct sb_uart_port *port);
+static void multi_shutdown(struct sb_uart_port *port);
+static unsigned int multi_get_divisor(struct sb_uart_port *port, unsigned int baud);
+static void multi_set_termios(struct sb_uart_port *port, struct MP_TERMIOS *termios, struct MP_TERMIOS *old);
+static void multi_pm(struct sb_uart_port *port, unsigned int state, unsigned int oldstate);
+static void multi_release_std_resource(struct mp_port *mtpt);
+static void multi_release_port(struct sb_uart_port *port);
+static int multi_request_port(struct sb_uart_port *port);
+static void multi_config_port(struct sb_uart_port *port, int flags);
+static int multi_verify_port(struct sb_uart_port *port, struct serial_struct *ser);
+static const char * multi_type(struct sb_uart_port *port);
+static void __init multi_init_ports(void);
+static void __init multi_register_ports(struct uart_driver *drv);
+static int init_mp_dev(struct pci_dev *pcidev, mppcibrd_t brd);
+
+static int deep[256];
+static int deep_count;
+static int fcr_arr[256];
+static int fcr_count;
+static int ttr[256];
+static int ttr_count;
+static int rtr[256];
+static int rtr_count;
+
+module_param_array(deep,int,&deep_count,0);
+module_param_array(fcr_arr,int,&fcr_count,0);
+module_param_array(ttr,int,&ttr_count,0);
+module_param_array(rtr,int,&rtr_count,0);
+
+static _INLINE_ unsigned int serial_in(struct mp_port *mtpt, int offset)
+{
+ return inb(mtpt->port.iobase + offset);
+}
+
+static _INLINE_ void serial_out(struct mp_port *mtpt, int offset, int value)
+{
+ outb(value, mtpt->port.iobase + offset);
+}
+
+static _INLINE_ unsigned int read_option_register(struct mp_port *mtpt, int offset)
+{
+ return inb(mtpt->option_base_addr + offset);
+}
+
+static int sb1053a_get_interface(struct mp_port *mtpt, int port_num)
+{
+ unsigned long option_base_addr = mtpt->option_base_addr;
+ unsigned int interface = 0;
+
+ switch (port_num)
+ {
+ case 0:
+ case 1:
+ /* set GPO[1:0] = 00 */
+ outb(0x00, option_base_addr + MP_OPTR_GPODR);
+ break;
+ case 2:
+ case 3:
+ /* set GPO[1:0] = 01 */
+ outb(0x01, option_base_addr + MP_OPTR_GPODR);
+ break;
+ case 4:
+ case 5:
+ /* set GPO[1:0] = 10 */
+ outb(0x02, option_base_addr + MP_OPTR_GPODR);
+ break;
+ default:
+ break;
+ }
+
+ port_num &= 0x1;
+
+ /* get interface */
+ interface = inb(option_base_addr + MP_OPTR_IIR0 + port_num);
+
+ /* set GPO[1:0] = 11 */
+ outb(0x03, option_base_addr + MP_OPTR_GPODR);
+
+ return (interface);
+}
+
+static int sb1054_get_register(struct sb_uart_port * port, int page, int reg)
+{
+ int ret = 0;
+ unsigned int lcr = 0;
+ unsigned int mcr = 0;
+ unsigned int tmp = 0;
+
+ if( page <= 0)
+ {
+ printk(" page 0 can not use this fuction\n");
+ return -1;
+ }
+
+ switch(page)
+ {
+ case 1:
+ lcr = SB105X_GET_LCR(port);
+ tmp = lcr | SB105X_LCR_DLAB;
+ SB105X_PUT_LCR(port, tmp);
+
+ tmp = SB105X_GET_LCR(port);
+
+ ret = SB105X_GET_REG(port,reg);
+ SB105X_PUT_LCR(port,lcr);
+ break;
+ case 2:
+ mcr = SB105X_GET_MCR(port);
+ tmp = mcr | SB105X_MCR_P2S;
+ SB105X_PUT_MCR(port,tmp);
+
+ ret = SB105X_GET_REG(port,reg);
+
+ SB105X_PUT_MCR(port,mcr);
+ break;
+ case 3:
+ lcr = SB105X_GET_LCR(port);
+ tmp = lcr | SB105X_LCR_BF;
+ SB105X_PUT_LCR(port,tmp);
+ SB105X_PUT_REG(port,SB105X_PSR,SB105X_PSR_P3KEY);
+
+ ret = SB105X_GET_REG(port,reg);
+
+ SB105X_PUT_LCR(port,lcr);
+ break;
+ case 4:
+ lcr = SB105X_GET_LCR(port);
+ tmp = lcr | SB105X_LCR_BF;
+ SB105X_PUT_LCR(port,tmp);
+ SB105X_PUT_REG(port,SB105X_PSR,SB105X_PSR_P4KEY);
+
+ ret = SB105X_GET_REG(port,reg);
+
+ SB105X_PUT_LCR(port,lcr);
+ break;
+ default:
+ printk(" error invalid page number \n");
+ return -1;
+ }
+
+ return ret;
+}
+
+static int sb1054_set_register(struct sb_uart_port * port, int page, int reg, int value)
+{
+ int lcr = 0;
+ int mcr = 0;
+ int ret = 0;
+
+ if( page <= 0)
+ {
+ printk(" page 0 can not use this fuction\n");
+ return -1;
+ }
+ switch(page)
+ {
+ case 1:
+ lcr = SB105X_GET_LCR(port);
+ SB105X_PUT_LCR(port, lcr | SB105X_LCR_DLAB);
+
+ SB105X_PUT_REG(port,reg,value);
+
+ SB105X_PUT_LCR(port, lcr);
+ ret = 1;
+ break;
+ case 2:
+ mcr = SB105X_GET_MCR(port);
+ SB105X_PUT_MCR(port, mcr | SB105X_MCR_P2S);
+
+ SB105X_PUT_REG(port,reg,value);
+
+ SB105X_PUT_MCR(port, mcr);
+ ret = 1;
+ break;
+ case 3:
+ lcr = SB105X_GET_LCR(port);
+ SB105X_PUT_LCR(port, lcr | SB105X_LCR_BF);
+ SB105X_PUT_PSR(port, SB105X_PSR_P3KEY);
+
+ SB105X_PUT_REG(port,reg,value);
+
+ SB105X_PUT_LCR(port, lcr);
+ ret = 1;
+ break;
+ case 4:
+ lcr = SB105X_GET_LCR(port);
+ SB105X_PUT_LCR(port, lcr | SB105X_LCR_BF);
+ SB105X_PUT_PSR(port, SB105X_PSR_P4KEY);
+
+ SB105X_PUT_REG(port,reg,value);
+
+ SB105X_PUT_LCR(port, lcr);
+ ret = 1;
+ break;
+ default:
+ printk(" error invalid page number \n");
+ return -1;
+ }
+
+ return ret;
+}
+
+static int set_multidrop_mode(struct sb_uart_port *port, unsigned int mode)
+{
+ int mdr = SB105XA_MDR_NPS;
+
+ if (mode & MDMODE_ENABLE)
+ {
+ mdr |= SB105XA_MDR_MDE;
+ }
+
+ if (1) //(mode & MDMODE_AUTO)
+ {
+ int efr = 0;
+ mdr |= SB105XA_MDR_AME;
+ efr = sb1054_get_register(port, PAGE_3, SB105X_EFR);
+ efr |= SB105X_EFR_SCD;
+ sb1054_set_register(port, PAGE_3, SB105X_EFR, efr);
+ }
+
+ sb1054_set_register(port, PAGE_1, SB105XA_MDR, mdr);
+ port->mdmode &= ~0x6;
+ port->mdmode |= mode;
+ printk("[%d] multidrop init: %x\n", port->line, port->mdmode);
+
+ return 0;
+}
+
+static int get_multidrop_addr(struct sb_uart_port *port)
+{
+ return sb1054_get_register(port, PAGE_3, SB105X_XOFF2);
+}
+
+static int set_multidrop_addr(struct sb_uart_port *port, unsigned int addr)
+{
+ sb1054_set_register(port, PAGE_3, SB105X_XOFF2, addr);
+
+ return 0;
+}
+
+static void SendATCommand(struct mp_port * mtpt)
+{
+ // a t cr lf
+ unsigned char ch[] = {0x61,0x74,0x0d,0x0a,0x0};
+ unsigned char lineControl;
+ unsigned char i=0;
+ unsigned char Divisor = 0xc;
+
+ lineControl = serial_inp(mtpt,UART_LCR);
+ serial_outp(mtpt,UART_LCR,(lineControl | UART_LCR_DLAB));
+ serial_outp(mtpt,UART_DLL,(Divisor & 0xff));
+ serial_outp(mtpt,UART_DLM,(Divisor & 0xff00)>>8); //baudrate is 4800
+
+
+ serial_outp(mtpt,UART_LCR,lineControl);
+ serial_outp(mtpt,UART_LCR,0x03); // N-8-1
+ serial_outp(mtpt,UART_FCR,7);
+ serial_outp(mtpt,UART_MCR,0x3);
+ while(ch[i]){
+ while((serial_inp(mtpt,UART_LSR) & 0x60) !=0x60){
+ ;
+ }
+ serial_outp(mtpt,0,ch[i++]);
+ }
+
+
+}// end of SendATCommand()
+
+static int set_deep_fifo(struct sb_uart_port * port, int status)
+{
+ int afr_status = 0;
+ afr_status = sb1054_get_register(port, PAGE_4, SB105X_AFR);
+
+ if(status == ENABLE)
+ {
+ afr_status |= SB105X_AFR_AFEN;
+ }
+ else
+ {
+ afr_status &= ~SB105X_AFR_AFEN;
+ }
+
+ sb1054_set_register(port,PAGE_4,SB105X_AFR,afr_status);
+ sb1054_set_register(port,PAGE_4,SB105X_TTR,ttr[port->line]);
+ sb1054_set_register(port,PAGE_4,SB105X_RTR,rtr[port->line]);
+ afr_status = sb1054_get_register(port, PAGE_4, SB105X_AFR);
+
+ return afr_status;
+}
+
+static int get_device_type(int arg)
+{
+ int ret;
+ ret = inb(mp_devs[arg].option_reg_addr+MP_OPTR_DIR0);
+ ret = (ret & 0xf0) >> 4;
+ switch (ret)
+ {
+ case DIR_UART_16C550:
+ return PORT_16C55X;
+ case DIR_UART_16C1050:
+ return PORT_16C105X;
+ case DIR_UART_16C1050A:
+ /*
+ if (mtpt->port.line < 2)
+ {
+ return PORT_16C105XA;
+ }
+ else
+ {
+ if (mtpt->device->device_id & 0x50)
+ {
+ return PORT_16C55X;
+ }
+ else
+ {
+ return PORT_16C105X;
+ }
+ }*/
+ return PORT_16C105XA;
+ default:
+ return PORT_UNKNOWN;
+ }
+
+}
+static int get_deep_fifo(struct sb_uart_port * port)
+{
+ int afr_status = 0;
+ afr_status = sb1054_get_register(port, PAGE_4, SB105X_AFR);
+ return afr_status;
+}
+
+static int set_auto_rts(struct sb_uart_port *port, int status)
+{
+ int atr_status = 0;
+
+#if 0
+ int efr_status = 0;
+
+ efr_status = sb1054_get_register(port, PAGE_3, SB105X_EFR);
+ if(status == ENABLE)
+ efr_status |= SB105X_EFR_ARTS;
+ else
+ efr_status &= ~SB105X_EFR_ARTS;
+ sb1054_set_register(port,PAGE_3,SB105X_EFR,efr_status);
+ efr_status = sb1054_get_register(port, PAGE_3, SB105X_EFR);
+#endif
+
+//ATR
+ atr_status = sb1054_get_register(port, PAGE_3, SB105X_ATR);
+ switch(status)
+ {
+ case RS422PTP:
+ atr_status = (SB105X_ATR_TPS) | (SB105X_ATR_A80);
+ break;
+ case RS422MD:
+ atr_status = (SB105X_ATR_TPS) | (SB105X_ATR_TCMS) | (SB105X_ATR_A80);
+ break;
+ case RS485NE:
+ atr_status = (SB105X_ATR_RCMS) | (SB105X_ATR_TPS) | (SB105X_ATR_TCMS) | (SB105X_ATR_A80);
+ break;
+ case RS485ECHO:
+ atr_status = (SB105X_ATR_TPS) | (SB105X_ATR_TCMS) | (SB105X_ATR_A80);
+ break;
+ }
+
+ sb1054_set_register(port,PAGE_3,SB105X_ATR,atr_status);
+ atr_status = sb1054_get_register(port, PAGE_3, SB105X_ATR);
+
+ return atr_status;
+}
+
+static void mp_stop(struct tty_struct *tty)
+{
+ struct sb_uart_state *state = tty->driver_data;
+ struct sb_uart_port *port = state->port;
+ unsigned long flags;
+
+ spin_lock_irqsave(&port->lock, flags);
+ port->ops->stop_tx(port);
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static void __mp_start(struct tty_struct *tty)
+{
+ struct sb_uart_state *state = tty->driver_data;
+ struct sb_uart_port *port = state->port;
+
+ if (!uart_circ_empty(&state->info->xmit) && state->info->xmit.buf &&
+ !tty->stopped && !tty->hw_stopped)
+ port->ops->start_tx(port);
+}
+
+static void mp_start(struct tty_struct *tty)
+{
+ __mp_start(tty);
+}
+
+static void mp_tasklet_action(unsigned long data)
+{
+ struct sb_uart_state *state = (struct sb_uart_state *)data;
+ struct tty_struct *tty;
+
+ printk("tasklet is called!\n");
+ tty = state->info->tty;
+ tty_wakeup(tty);
+}
+
+static inline void mp_update_mctrl(struct sb_uart_port *port, unsigned int set, unsigned int clear)
+{
+ unsigned int old;
+
+ old = port->mctrl;
+ port->mctrl = (old & ~clear) | set;
+ if (old != port->mctrl)
+ port->ops->set_mctrl(port, port->mctrl);
+}
+
+#define uart_set_mctrl(port,set) mp_update_mctrl(port,set,0)
+#define uart_clear_mctrl(port,clear) mp_update_mctrl(port,0,clear)
+
+static int mp_startup(struct sb_uart_state *state, int init_hw)
+{
+ struct sb_uart_info *info = state->info;
+ struct sb_uart_port *port = state->port;
+ unsigned long page;
+ int retval = 0;
+
+ if (info->flags & UIF_INITIALIZED)
+ return 0;
+
+ if (info->tty)
+ set_bit(TTY_IO_ERROR, &info->tty->flags);
+
+ if (port->type == PORT_UNKNOWN)
+ return 0;
+
+ if (!info->xmit.buf) {
+ page = get_zeroed_page(GFP_KERNEL);
+ if (!page)
+ return -ENOMEM;
+
+ info->xmit.buf = (unsigned char *) page;
+
+ uart_circ_clear(&info->xmit);
+ }
+
+ retval = port->ops->startup(port);
+ if (retval == 0) {
+ if (init_hw) {
+ mp_change_speed(state, NULL);
+
+ if (info->tty->termios.c_cflag & CBAUD)
+ uart_set_mctrl(port, TIOCM_RTS | TIOCM_DTR);
+ }
+
+ info->flags |= UIF_INITIALIZED;
+
+
+ clear_bit(TTY_IO_ERROR, &info->tty->flags);
+ }
+
+ if (retval && capable(CAP_SYS_ADMIN))
+ retval = 0;
+
+ return retval;
+}
+
+static void mp_shutdown(struct sb_uart_state *state)
+{
+ struct sb_uart_info *info = state->info;
+ struct sb_uart_port *port = state->port;
+
+ if (info->tty)
+ set_bit(TTY_IO_ERROR, &info->tty->flags);
+
+ if (info->flags & UIF_INITIALIZED) {
+ info->flags &= ~UIF_INITIALIZED;
+
+ if (!info->tty || (info->tty->termios.c_cflag & HUPCL))
+ uart_clear_mctrl(port, TIOCM_DTR | TIOCM_RTS);
+
+ wake_up_interruptible(&info->delta_msr_wait);
+
+ port->ops->shutdown(port);
+
+ synchronize_irq(port->irq);
+ }
+ tasklet_kill(&info->tlet);
+
+ if (info->xmit.buf) {
+ free_page((unsigned long)info->xmit.buf);
+ info->xmit.buf = NULL;
+ }
+}
+
+static void mp_change_speed(struct sb_uart_state *state, struct MP_TERMIOS *old_termios)
+{
+ struct tty_struct *tty = state->info->tty;
+ struct sb_uart_port *port = state->port;
+
+ if (!tty || port->type == PORT_UNKNOWN)
+ return;
+
+ if (tty->termios.c_cflag & CRTSCTS)
+ state->info->flags |= UIF_CTS_FLOW;
+ else
+ state->info->flags &= ~UIF_CTS_FLOW;
+
+ if (tty->termios.c_cflag & CLOCAL)
+ state->info->flags &= ~UIF_CHECK_CD;
+ else
+ state->info->flags |= UIF_CHECK_CD;
+
+ port->ops->set_termios(port, &tty->termios, old_termios);
+}
+
+static inline int __mp_put_char(struct sb_uart_port *port, struct circ_buf *circ, unsigned char c)
+{
+ unsigned long flags;
+ int ret = 0;
+
+ if (!circ->buf)
+ return 0;
+
+ spin_lock_irqsave(&port->lock, flags);
+ if (uart_circ_chars_free(circ) != 0) {
+ circ->buf[circ->head] = c;
+ circ->head = (circ->head + 1) & (UART_XMIT_SIZE - 1);
+ ret = 1;
+ }
+ spin_unlock_irqrestore(&port->lock, flags);
+ return ret;
+}
+
+static int mp_put_char(struct tty_struct *tty, unsigned char ch)
+{
+ struct sb_uart_state *state = tty->driver_data;
+
+ return __mp_put_char(state->port, &state->info->xmit, ch);
+}
+
+static void mp_put_chars(struct tty_struct *tty)
+{
+ mp_start(tty);
+}
+
+static int mp_write(struct tty_struct *tty, const unsigned char * buf, int count)
+{
+ struct sb_uart_state *state = tty->driver_data;
+ struct sb_uart_port *port;
+ struct circ_buf *circ;
+ int c, ret = 0;
+
+ if (!state || !state->info) {
+ return -EL3HLT;
+ }
+
+ port = state->port;
+ circ = &state->info->xmit;
+
+ if (!circ->buf)
+ return 0;
+
+ while (1) {
+ c = CIRC_SPACE_TO_END(circ->head, circ->tail, UART_XMIT_SIZE);
+ if (count < c)
+ c = count;
+ if (c <= 0)
+ break;
+ memcpy(circ->buf + circ->head, buf, c);
+
+ circ->head = (circ->head + c) & (UART_XMIT_SIZE - 1);
+ buf += c;
+ count -= c;
+ ret += c;
+ }
+ mp_start(tty);
+ return ret;
+}
+
+static int mp_write_room(struct tty_struct *tty)
+{
+ struct sb_uart_state *state = tty->driver_data;
+
+ return uart_circ_chars_free(&state->info->xmit);
+}
+
+static int mp_chars_in_buffer(struct tty_struct *tty)
+{
+ struct sb_uart_state *state = tty->driver_data;
+
+ return uart_circ_chars_pending(&state->info->xmit);
+}
+
+static void mp_flush_buffer(struct tty_struct *tty)
+{
+ struct sb_uart_state *state = tty->driver_data;
+ struct sb_uart_port *port;
+ unsigned long flags;
+
+ if (!state || !state->info) {
+ return;
+ }
+
+ port = state->port;
+ spin_lock_irqsave(&port->lock, flags);
+ uart_circ_clear(&state->info->xmit);
+ spin_unlock_irqrestore(&port->lock, flags);
+ wake_up_interruptible(&tty->write_wait);
+ tty_wakeup(tty);
+}
+
+static void mp_send_xchar(struct tty_struct *tty, char ch)
+{
+ struct sb_uart_state *state = tty->driver_data;
+ struct sb_uart_port *port = state->port;
+ unsigned long flags;
+
+ if (port->ops->send_xchar)
+ port->ops->send_xchar(port, ch);
+ else {
+ port->x_char = ch;
+ if (ch) {
+ spin_lock_irqsave(&port->lock, flags);
+ port->ops->start_tx(port);
+ spin_unlock_irqrestore(&port->lock, flags);
+ }
+ }
+}
+
+static void mp_throttle(struct tty_struct *tty)
+{
+ struct sb_uart_state *state = tty->driver_data;
+
+ if (I_IXOFF(tty))
+ mp_send_xchar(tty, STOP_CHAR(tty));
+
+ if (tty->termios.c_cflag & CRTSCTS)
+ uart_clear_mctrl(state->port, TIOCM_RTS);
+}
+
+static void mp_unthrottle(struct tty_struct *tty)
+{
+ struct sb_uart_state *state = tty->driver_data;
+ struct sb_uart_port *port = state->port;
+
+ if (I_IXOFF(tty)) {
+ if (port->x_char)
+ port->x_char = 0;
+ else
+ mp_send_xchar(tty, START_CHAR(tty));
+ }
+
+ if (tty->termios.c_cflag & CRTSCTS)
+ uart_set_mctrl(port, TIOCM_RTS);
+}
+
+static int mp_get_info(struct sb_uart_state *state, struct serial_struct *retinfo)
+{
+ struct sb_uart_port *port = state->port;
+ struct serial_struct tmp;
+
+ memset(&tmp, 0, sizeof(tmp));
+ tmp.type = port->type;
+ tmp.line = port->line;
+ tmp.port = port->iobase;
+ if (HIGH_BITS_OFFSET)
+ tmp.port_high = (long) port->iobase >> HIGH_BITS_OFFSET;
+ tmp.irq = port->irq;
+ tmp.flags = port->flags;
+ tmp.xmit_fifo_size = port->fifosize;
+ tmp.baud_base = port->uartclk / 16;
+ tmp.close_delay = state->close_delay;
+ tmp.closing_wait = state->closing_wait == USF_CLOSING_WAIT_NONE ?
+ ASYNC_CLOSING_WAIT_NONE :
+ state->closing_wait;
+ tmp.custom_divisor = port->custom_divisor;
+ tmp.hub6 = port->hub6;
+ tmp.io_type = port->iotype;
+ tmp.iomem_reg_shift = port->regshift;
+ tmp.iomem_base = (void *)port->mapbase;
+
+ if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
+ return -EFAULT;
+ return 0;
+}
+
+static int mp_set_info(struct sb_uart_state *state, struct serial_struct *newinfo)
+{
+ struct serial_struct new_serial;
+ struct sb_uart_port *port = state->port;
+ unsigned long new_port;
+ unsigned int change_irq, change_port, closing_wait;
+ unsigned int old_custom_divisor;
+ unsigned int old_flags, new_flags;
+ int retval = 0;
+
+ if (copy_from_user(&new_serial, newinfo, sizeof(new_serial)))
+ return -EFAULT;
+
+ new_port = new_serial.port;
+ if (HIGH_BITS_OFFSET)
+ new_port += (unsigned long) new_serial.port_high << HIGH_BITS_OFFSET;
+
+ new_serial.irq = irq_canonicalize(new_serial.irq);
+
+ closing_wait = new_serial.closing_wait == ASYNC_CLOSING_WAIT_NONE ?
+ USF_CLOSING_WAIT_NONE : new_serial.closing_wait;
+ MP_STATE_LOCK(state);
+
+ change_irq = new_serial.irq != port->irq;
+ change_port = new_port != port->iobase ||
+ (unsigned long)new_serial.iomem_base != port->mapbase ||
+ new_serial.hub6 != port->hub6 ||
+ new_serial.io_type != port->iotype ||
+ new_serial.iomem_reg_shift != port->regshift ||
+ new_serial.type != port->type;
+ old_flags = port->flags;
+ new_flags = new_serial.flags;
+ old_custom_divisor = port->custom_divisor;
+
+ if (!capable(CAP_SYS_ADMIN)) {
+ retval = -EPERM;
+ if (change_irq || change_port ||
+ (new_serial.baud_base != port->uartclk / 16) ||
+ (new_serial.close_delay != state->close_delay) ||
+ (closing_wait != state->closing_wait) ||
+ (new_serial.xmit_fifo_size != port->fifosize) ||
+ (((new_flags ^ old_flags) & ~UPF_USR_MASK) != 0))
+ goto exit;
+ port->flags = ((port->flags & ~UPF_USR_MASK) |
+ (new_flags & UPF_USR_MASK));
+ port->custom_divisor = new_serial.custom_divisor;
+ goto check_and_exit;
+ }
+
+ if (port->ops->verify_port)
+ retval = port->ops->verify_port(port, &new_serial);
+
+ if ((new_serial.irq >= NR_IRQS) || (new_serial.irq < 0) ||
+ (new_serial.baud_base < 9600))
+ retval = -EINVAL;
+
+ if (retval)
+ goto exit;
+
+ if (change_port || change_irq) {
+ retval = -EBUSY;
+
+ if (uart_users(state) > 1)
+ goto exit;
+
+ mp_shutdown(state);
+ }
+
+ if (change_port) {
+ unsigned long old_iobase, old_mapbase;
+ unsigned int old_type, old_iotype, old_hub6, old_shift;
+
+ old_iobase = port->iobase;
+ old_mapbase = port->mapbase;
+ old_type = port->type;
+ old_hub6 = port->hub6;
+ old_iotype = port->iotype;
+ old_shift = port->regshift;
+
+ if (old_type != PORT_UNKNOWN)
+ port->ops->release_port(port);
+
+ port->iobase = new_port;
+ port->type = new_serial.type;
+ port->hub6 = new_serial.hub6;
+ port->iotype = new_serial.io_type;
+ port->regshift = new_serial.iomem_reg_shift;
+ port->mapbase = (unsigned long)new_serial.iomem_base;
+
+ if (port->type != PORT_UNKNOWN) {
+ retval = port->ops->request_port(port);
+ } else {
+ retval = 0;
+ }
+
+ if (retval && old_type != PORT_UNKNOWN) {
+ port->iobase = old_iobase;
+ port->type = old_type;
+ port->hub6 = old_hub6;
+ port->iotype = old_iotype;
+ port->regshift = old_shift;
+ port->mapbase = old_mapbase;
+ retval = port->ops->request_port(port);
+ if (retval)
+ port->type = PORT_UNKNOWN;
+
+ retval = -EBUSY;
+ }
+ }
+
+ port->irq = new_serial.irq;
+ port->uartclk = new_serial.baud_base * 16;
+ port->flags = (port->flags & ~UPF_CHANGE_MASK) |
+ (new_flags & UPF_CHANGE_MASK);
+ port->custom_divisor = new_serial.custom_divisor;
+ state->close_delay = new_serial.close_delay;
+ state->closing_wait = closing_wait;
+ port->fifosize = new_serial.xmit_fifo_size;
+ if (state->info->tty)
+ state->info->tty->low_latency =
+ (port->flags & UPF_LOW_LATENCY) ? 1 : 0;
+
+check_and_exit:
+ retval = 0;
+ if (port->type == PORT_UNKNOWN)
+ goto exit;
+ if (state->info->flags & UIF_INITIALIZED) {
+ if (((old_flags ^ port->flags) & UPF_SPD_MASK) ||
+ old_custom_divisor != port->custom_divisor) {
+ if (port->flags & UPF_SPD_MASK) {
+ printk(KERN_NOTICE
+ "%s sets custom speed on ttyMP%d. This "
+ "is deprecated.\n", current->comm,
+ port->line);
+ }
+ mp_change_speed(state, NULL);
+ }
+ } else
+ retval = mp_startup(state, 1);
+exit:
+ MP_STATE_UNLOCK(state);
+ return retval;
+}
+
+
+static int mp_get_lsr_info(struct sb_uart_state *state, unsigned int *value)
+{
+ struct sb_uart_port *port = state->port;
+ unsigned int result;
+
+ result = port->ops->tx_empty(port);
+
+ if (port->x_char ||
+ ((uart_circ_chars_pending(&state->info->xmit) > 0) &&
+ !state->info->tty->stopped && !state->info->tty->hw_stopped))
+ result &= ~TIOCSER_TEMT;
+
+ return put_user(result, value);
+}
+
+static int mp_tiocmget(struct tty_struct *tty)
+{
+ struct sb_uart_state *state = tty->driver_data;
+ struct sb_uart_port *port = state->port;
+ int result = -EIO;
+
+ MP_STATE_LOCK(state);
+ if (!(tty->flags & (1 << TTY_IO_ERROR))) {
+ result = port->mctrl;
+ spin_lock_irq(&port->lock);
+ result |= port->ops->get_mctrl(port);
+ spin_unlock_irq(&port->lock);
+ }
+ MP_STATE_UNLOCK(state);
+ return result;
+}
+
+static int mp_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear)
+{
+ struct sb_uart_state *state = tty->driver_data;
+ struct sb_uart_port *port = state->port;
+ int ret = -EIO;
+
+
+ MP_STATE_LOCK(state);
+ if (!(tty->flags & (1 << TTY_IO_ERROR))) {
+ mp_update_mctrl(port, set, clear);
+ ret = 0;
+ }
+ MP_STATE_UNLOCK(state);
+
+ return ret;
+}
+
+static int mp_break_ctl(struct tty_struct *tty, int break_state)
+{
+ struct sb_uart_state *state = tty->driver_data;
+ struct sb_uart_port *port = state->port;
+
+ MP_STATE_LOCK(state);
+
+ if (port->type != PORT_UNKNOWN)
+ port->ops->break_ctl(port, break_state);
+
+ MP_STATE_UNLOCK(state);
+ return 0;
+}
+
+static int mp_do_autoconfig(struct sb_uart_state *state)
+{
+ struct sb_uart_port *port = state->port;
+ int flags, ret;
+
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+
+ if (mutex_lock_interruptible(&state->mutex))
+ return -ERESTARTSYS;
+ ret = -EBUSY;
+ if (uart_users(state) == 1) {
+ mp_shutdown(state);
+
+ if (port->type != PORT_UNKNOWN)
+ port->ops->release_port(port);
+
+ flags = UART_CONFIG_TYPE;
+ if (port->flags & UPF_AUTO_IRQ)
+ flags |= UART_CONFIG_IRQ;
+
+ port->ops->config_port(port, flags);
+
+ ret = mp_startup(state, 1);
+ }
+ MP_STATE_UNLOCK(state);
+ return ret;
+}
+
+static int mp_wait_modem_status(struct sb_uart_state *state, unsigned long arg)
+{
+ struct sb_uart_port *port = state->port;
+ DECLARE_WAITQUEUE(wait, current);
+ struct sb_uart_icount cprev, cnow;
+ int ret;
+
+ spin_lock_irq(&port->lock);
+ memcpy(&cprev, &port->icount, sizeof(struct sb_uart_icount));
+
+ port->ops->enable_ms(port);
+ spin_unlock_irq(&port->lock);
+
+ add_wait_queue(&state->info->delta_msr_wait, &wait);
+ for (;;) {
+ spin_lock_irq(&port->lock);
+ memcpy(&cnow, &port->icount, sizeof(struct sb_uart_icount));
+ spin_unlock_irq(&port->lock);
+
+ set_current_state(TASK_INTERRUPTIBLE);
+
+ if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
+ ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
+ ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) ||
+ ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts))) {
+ ret = 0;
+ break;
+ }
+
+ schedule();
+
+ if (signal_pending(current)) {
+ ret = -ERESTARTSYS;
+ break;
+ }
+
+ cprev = cnow;
+ }
+
+ current->state = TASK_RUNNING;
+ remove_wait_queue(&state->info->delta_msr_wait, &wait);
+
+ return ret;
+}
+
+static int mp_get_count(struct sb_uart_state *state, struct serial_icounter_struct *icnt)
+{
+ struct serial_icounter_struct icount;
+ struct sb_uart_icount cnow;
+ struct sb_uart_port *port = state->port;
+
+ spin_lock_irq(&port->lock);
+ memcpy(&cnow, &port->icount, sizeof(struct sb_uart_icount));
+ spin_unlock_irq(&port->lock);
+
+ icount.cts = cnow.cts;
+ icount.dsr = cnow.dsr;
+ icount.rng = cnow.rng;
+ icount.dcd = cnow.dcd;
+ icount.rx = cnow.rx;
+ icount.tx = cnow.tx;
+ icount.frame = cnow.frame;
+ icount.overrun = cnow.overrun;
+ icount.parity = cnow.parity;
+ icount.brk = cnow.brk;
+ icount.buf_overrun = cnow.buf_overrun;
+
+ return copy_to_user(icnt, &icount, sizeof(icount)) ? -EFAULT : 0;
+}
+
+static int mp_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg)
+{
+ struct sb_uart_state *state = tty->driver_data;
+ struct mp_port *info = (struct mp_port *)state->port;
+ int ret = -ENOIOCTLCMD;
+
+
+ switch (cmd) {
+ case TIOCSMULTIDROP:
+ /* set multi-drop mode enable or disable, and default operation mode is H/W mode */
+ if (info->port.type == PORT_16C105XA)
+ {
+ //arg &= ~0x6;
+ //state->port->mdmode = 0;
+ return set_multidrop_mode((struct sb_uart_port *)info, (unsigned int)arg);
+ }
+ ret = -ENOTSUPP;
+ break;
+ case GETDEEPFIFO:
+ ret = get_deep_fifo(state->port);
+ return ret;
+ case SETDEEPFIFO:
+ ret = set_deep_fifo(state->port,arg);
+ deep[state->port->line] = arg;
+ return ret;
+ case SETTTR:
+ if (info->port.type == PORT_16C105X || info->port.type == PORT_16C105XA){
+ ret = sb1054_set_register(state->port,PAGE_4,SB105X_TTR,arg);
+ ttr[state->port->line] = arg;
+ }
+ return ret;
+ case SETRTR:
+ if (info->port.type == PORT_16C105X || info->port.type == PORT_16C105XA){
+ ret = sb1054_set_register(state->port,PAGE_4,SB105X_RTR,arg);
+ rtr[state->port->line] = arg;
+ }
+ return ret;
+ case GETTTR:
+ if (info->port.type == PORT_16C105X || info->port.type == PORT_16C105XA){
+ ret = sb1054_get_register(state->port,PAGE_4,SB105X_TTR);
+ }
+ return ret;
+ case GETRTR:
+ if (info->port.type == PORT_16C105X || info->port.type == PORT_16C105XA){
+ ret = sb1054_get_register(state->port,PAGE_4,SB105X_RTR);
+ }
+ return ret;
+
+ case SETFCR:
+ if (info->port.type == PORT_16C105X || info->port.type == PORT_16C105XA){
+ ret = sb1054_set_register(state->port,PAGE_1,SB105X_FCR,arg);
+ }
+ else{
+ serial_out(info,2,arg);
+ }
+
+ return ret;
+ case TIOCSMDADDR:
+ /* set multi-drop address */
+ if (info->port.type == PORT_16C105XA)
+ {
+ state->port->mdmode |= MDMODE_ADDR;
+ return set_multidrop_addr((struct sb_uart_port *)info, (unsigned int)arg);
+ }
+ ret = -ENOTSUPP;
+ break;
+
+ case TIOCGMDADDR:
+ /* set multi-drop address */
+ if ((info->port.type == PORT_16C105XA) && (state->port->mdmode & MDMODE_ADDR))
+ {
+ return get_multidrop_addr((struct sb_uart_port *)info);
+ }
+ ret = -ENOTSUPP;
+ break;
+
+ case TIOCSENDADDR:
+ /* send address in multi-drop mode */
+ if ((info->port.type == PORT_16C105XA)
+ && (state->port->mdmode & (MDMODE_ENABLE)))
+ {
+ if (mp_chars_in_buffer(tty) > 0)
+ {
+ tty_wait_until_sent(tty, 0);
+ }
+ //while ((serial_in(info, UART_LSR) & 0x60) != 0x60);
+ //while (sb1054_get_register(state->port, PAGE_2, SB105X_TFCR) != 0);
+ while ((serial_in(info, UART_LSR) & 0x60) != 0x60);
+ serial_out(info, UART_SCR, (int)arg);
+ }
+ break;
+
+ case TIOCGSERIAL:
+ ret = mp_get_info(state, (struct serial_struct *)arg);
+ break;
+
+ case TIOCSSERIAL:
+ ret = mp_set_info(state, (struct serial_struct *)arg);
+ break;
+
+ case TIOCSERCONFIG:
+ ret = mp_do_autoconfig(state);
+ break;
+
+ case TIOCSERGWILD: /* obsolete */
+ case TIOCSERSWILD: /* obsolete */
+ ret = 0;
+ break;
+ /* for Multiport */
+ case TIOCGNUMOFPORT: /* Get number of ports */
+ return NR_PORTS;
+ case TIOCGGETDEVID:
+ return mp_devs[arg].device_id;
+ case TIOCGGETREV:
+ return mp_devs[arg].revision;
+ case TIOCGGETNRPORTS:
+ return mp_devs[arg].nr_ports;
+ case TIOCGGETBDNO:
+ return NR_BOARD;
+ case TIOCGGETINTERFACE:
+ if (mp_devs[arg].revision == 0xc0)
+ {
+ /* for SB16C1053APCI */
+ return (sb1053a_get_interface(info, info->port.line));
+ }
+ else
+ {
+ return (inb(mp_devs[arg].option_reg_addr+MP_OPTR_IIR0+(state->port->line/8)));
+ }
+ case TIOCGGETPORTTYPE:
+ ret = get_device_type(arg);;
+ return ret;
+ case TIOCSMULTIECHO: /* set to multi-drop mode(RS422) or echo mode(RS485)*/
+ outb( ( inb(info->interface_config_addr) & ~0x03 ) | 0x01 ,
+ info->interface_config_addr);
+ return 0;
+ case TIOCSPTPNOECHO: /* set to multi-drop mode(RS422) or echo mode(RS485) */
+ outb( ( inb(info->interface_config_addr) & ~0x03 ) ,
+ info->interface_config_addr);
+ return 0;
+ }
+
+ if (ret != -ENOIOCTLCMD)
+ goto out;
+
+ if (tty->flags & (1 << TTY_IO_ERROR)) {
+ ret = -EIO;
+ goto out;
+ }
+
+ switch (cmd) {
+ case TIOCMIWAIT:
+ ret = mp_wait_modem_status(state, arg);
+ break;
+
+ case TIOCGICOUNT:
+ ret = mp_get_count(state, (struct serial_icounter_struct *)arg);
+ break;
+ }
+
+ if (ret != -ENOIOCTLCMD)
+ goto out;
+
+ MP_STATE_LOCK(state);
+ switch (cmd) {
+ case TIOCSERGETLSR: /* Get line status register */
+ ret = mp_get_lsr_info(state, (unsigned int *)arg);
+ break;
+
+ default: {
+ struct sb_uart_port *port = state->port;
+ if (port->ops->ioctl)
+ ret = port->ops->ioctl(port, cmd, arg);
+ break;
+ }
+ }
+
+ MP_STATE_UNLOCK(state);
+out:
+ return ret;
+}
+
+static void mp_set_termios(struct tty_struct *tty, struct MP_TERMIOS *old_termios)
+{
+ struct sb_uart_state *state = tty->driver_data;
+ unsigned long flags;
+ unsigned int cflag = tty->termios.c_cflag;
+
+#define RELEVANT_IFLAG(iflag) ((iflag) & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
+
+ if ((cflag ^ old_termios->c_cflag) == 0 &&
+ RELEVANT_IFLAG(tty->termios.c_iflag ^ old_termios->c_iflag) == 0)
+ return;
+
+ mp_change_speed(state, old_termios);
+
+ if ((old_termios->c_cflag & CBAUD) && !(cflag & CBAUD))
+ uart_clear_mctrl(state->port, TIOCM_RTS | TIOCM_DTR);
+
+ if (!(old_termios->c_cflag & CBAUD) && (cflag & CBAUD)) {
+ unsigned int mask = TIOCM_DTR;
+ if (!(cflag & CRTSCTS) ||
+ !test_bit(TTY_THROTTLED, &tty->flags))
+ mask |= TIOCM_RTS;
+ uart_set_mctrl(state->port, mask);
+ }
+
+ if ((old_termios->c_cflag & CRTSCTS) && !(cflag & CRTSCTS)) {
+ spin_lock_irqsave(&state->port->lock, flags);
+ tty->hw_stopped = 0;
+ __mp_start(tty);
+ spin_unlock_irqrestore(&state->port->lock, flags);
+ }
+
+ if (!(old_termios->c_cflag & CRTSCTS) && (cflag & CRTSCTS)) {
+ spin_lock_irqsave(&state->port->lock, flags);
+ if (!(state->port->ops->get_mctrl(state->port) & TIOCM_CTS)) {
+ tty->hw_stopped = 1;
+ state->port->ops->stop_tx(state->port);
+ }
+ spin_unlock_irqrestore(&state->port->lock, flags);
+ }
+}
+
+static void mp_close(struct tty_struct *tty, struct file *filp)
+{
+ struct sb_uart_state *state = tty->driver_data;
+ struct sb_uart_port *port;
+
+ printk("mp_close!\n");
+ if (!state || !state->port)
+ return;
+
+ port = state->port;
+
+ printk("close1 %d\n", __LINE__);
+ MP_STATE_LOCK(state);
+
+ printk("close2 %d\n", __LINE__);
+ if (tty_hung_up_p(filp))
+ goto done;
+
+ printk("close3 %d\n", __LINE__);
+ if ((tty->count == 1) && (state->count != 1)) {
+ printk("mp_close: bad serial port count; tty->count is 1, "
+ "state->count is %d\n", state->count);
+ state->count = 1;
+ }
+ printk("close4 %d\n", __LINE__);
+ if (--state->count < 0) {
+ printk("rs_close: bad serial port count for ttyMP%d: %d\n",
+ port->line, state->count);
+ state->count = 0;
+ }
+ if (state->count)
+ goto done;
+
+ tty->closing = 1;
+
+ printk("close5 %d\n", __LINE__);
+ if (state->closing_wait != USF_CLOSING_WAIT_NONE)
+ tty_wait_until_sent(tty, state->closing_wait);
+
+ printk("close6 %d\n", __LINE__);
+ if (state->info->flags & UIF_INITIALIZED) {
+ unsigned long flags;
+ spin_lock_irqsave(&port->lock, flags);
+ port->ops->stop_rx(port);
+ spin_unlock_irqrestore(&port->lock, flags);
+ mp_wait_until_sent(tty, port->timeout);
+ }
+ printk("close7 %d\n", __LINE__);
+
+ mp_shutdown(state);
+ printk("close8 %d\n", __LINE__);
+ mp_flush_buffer(tty);
+ tty_ldisc_flush(tty);
+ tty->closing = 0;
+ state->info->tty = NULL;
+ if (state->info->blocked_open)
+ {
+ if (state->close_delay)
+ {
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule_timeout(state->close_delay);
+ }
+ }
+ else
+ {
+ mp_change_pm(state, 3);
+ }
+ printk("close8 %d\n", __LINE__);
+
+ state->info->flags &= ~UIF_NORMAL_ACTIVE;
+ wake_up_interruptible(&state->info->open_wait);
+
+done:
+ printk("close done\n");
+ MP_STATE_UNLOCK(state);
+ module_put(THIS_MODULE);
+}
+
+static void mp_wait_until_sent(struct tty_struct *tty, int timeout)
+{
+ struct sb_uart_state *state = tty->driver_data;
+ struct sb_uart_port *port = state->port;
+ unsigned long char_time, expire;
+
+ if (port->type == PORT_UNKNOWN || port->fifosize == 0)
+ return;
+
+ char_time = (port->timeout - HZ/50) / port->fifosize;
+ char_time = char_time / 5;
+ if (char_time == 0)
+ char_time = 1;
+ if (timeout && timeout < char_time)
+ char_time = timeout;
+
+ if (timeout == 0 || timeout > 2 * port->timeout)
+ timeout = 2 * port->timeout;
+
+ expire = jiffies + timeout;
+
+ while (!port->ops->tx_empty(port)) {
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule_timeout(char_time);
+ if (signal_pending(current))
+ break;
+ if (time_after(jiffies, expire))
+ break;
+ }
+ set_current_state(TASK_RUNNING); /* might not be needed */
+}
+
+static void mp_hangup(struct tty_struct *tty)
+{
+ struct sb_uart_state *state = tty->driver_data;
+
+ MP_STATE_LOCK(state);
+ if (state->info && state->info->flags & UIF_NORMAL_ACTIVE) {
+ mp_flush_buffer(tty);
+ mp_shutdown(state);
+ state->count = 0;
+ state->info->flags &= ~UIF_NORMAL_ACTIVE;
+ state->info->tty = NULL;
+ wake_up_interruptible(&state->info->open_wait);
+ wake_up_interruptible(&state->info->delta_msr_wait);
+ }
+ MP_STATE_UNLOCK(state);
+}
+
+static void mp_update_termios(struct sb_uart_state *state)
+{
+ struct tty_struct *tty = state->info->tty;
+ struct sb_uart_port *port = state->port;
+
+ if (!(tty->flags & (1 << TTY_IO_ERROR))) {
+ mp_change_speed(state, NULL);
+
+ if (tty->termios.c_cflag & CBAUD)
+ uart_set_mctrl(port, TIOCM_DTR | TIOCM_RTS);
+ }
+}
+
+static int mp_block_til_ready(struct file *filp, struct sb_uart_state *state)
+{
+ DECLARE_WAITQUEUE(wait, current);
+ struct sb_uart_info *info = state->info;
+ struct sb_uart_port *port = state->port;
+ unsigned int mctrl;
+
+ info->blocked_open++;
+ state->count--;
+
+ add_wait_queue(&info->open_wait, &wait);
+ while (1) {
+ set_current_state(TASK_INTERRUPTIBLE);
+
+ if (tty_hung_up_p(filp) || info->tty == NULL)
+ break;
+
+ if (!(info->flags & UIF_INITIALIZED))
+ break;
+
+ if ((filp->f_flags & O_NONBLOCK) ||
+ (info->tty->termios.c_cflag & CLOCAL) ||
+ (info->tty->flags & (1 << TTY_IO_ERROR))) {
+ break;
+ }
+
+ if (info->tty->termios.c_cflag & CBAUD)
+ uart_set_mctrl(port, TIOCM_DTR);
+
+ spin_lock_irq(&port->lock);
+ port->ops->enable_ms(port);
+ mctrl = port->ops->get_mctrl(port);
+ spin_unlock_irq(&port->lock);
+ if (mctrl & TIOCM_CAR)
+ break;
+
+ MP_STATE_UNLOCK(state);
+ schedule();
+ MP_STATE_LOCK(state);
+
+ if (signal_pending(current))
+ break;
+ }
+ set_current_state(TASK_RUNNING);
+ remove_wait_queue(&info->open_wait, &wait);
+
+ state->count++;
+ info->blocked_open--;
+
+ if (signal_pending(current))
+ return -ERESTARTSYS;
+
+ if (!info->tty || tty_hung_up_p(filp))
+ return -EAGAIN;
+
+ return 0;
+}
+
+static struct sb_uart_state *uart_get(struct uart_driver *drv, int line)
+{
+ struct sb_uart_state *state;
+
+ MP_MUTEX_LOCK(mp_mutex);
+ state = drv->state + line;
+ if (mutex_lock_interruptible(&state->mutex)) {
+ state = ERR_PTR(-ERESTARTSYS);
+ goto out;
+ }
+ state->count++;
+ if (!state->port) {
+ state->count--;
+ MP_STATE_UNLOCK(state);
+ state = ERR_PTR(-ENXIO);
+ goto out;
+ }
+
+ if (!state->info) {
+ state->info = kmalloc(sizeof(struct sb_uart_info), GFP_KERNEL);
+ if (state->info) {
+ memset(state->info, 0, sizeof(struct sb_uart_info));
+ init_waitqueue_head(&state->info->open_wait);
+ init_waitqueue_head(&state->info->delta_msr_wait);
+
+ state->port->info = state->info;
+
+ tasklet_init(&state->info->tlet, mp_tasklet_action,
+ (unsigned long)state);
+ } else {
+ state->count--;
+ MP_STATE_UNLOCK(state);
+ state = ERR_PTR(-ENOMEM);
+ }
+ }
+
+out:
+ MP_MUTEX_UNLOCK(mp_mutex);
+ return state;
+}
+
+static int mp_open(struct tty_struct *tty, struct file *filp)
+{
+ struct uart_driver *drv = (struct uart_driver *)tty->driver->driver_state;
+ struct sb_uart_state *state;
+ int retval;
+ int line = tty->index;
+ struct mp_port *mtpt;
+
+ retval = -ENODEV;
+ if (line >= tty->driver->num)
+ goto fail;
+
+ state = uart_get(drv, line);
+
+ mtpt = (struct mp_port *)state->port;
+
+ if (IS_ERR(state)) {
+ retval = PTR_ERR(state);
+ goto fail;
+ }
+
+ tty->driver_data = state;
+ tty->low_latency = (state->port->flags & UPF_LOW_LATENCY) ? 1 : 0;
+ tty->alt_speed = 0;
+ state->info->tty = tty;
+
+ if (tty_hung_up_p(filp)) {
+ retval = -EAGAIN;
+ state->count--;
+ MP_STATE_UNLOCK(state);
+ goto fail;
+ }
+
+ if (state->count == 1)
+ mp_change_pm(state, 0);
+
+ retval = mp_startup(state, 0);
+
+ if (retval == 0)
+ retval = mp_block_til_ready(filp, state);
+ MP_STATE_UNLOCK(state);
+
+ if (retval == 0 && !(state->info->flags & UIF_NORMAL_ACTIVE)) {
+ state->info->flags |= UIF_NORMAL_ACTIVE;
+
+ mp_update_termios(state);
+ }
+
+ uart_clear_mctrl(state->port, TIOCM_RTS);
+ try_module_get(THIS_MODULE);
+fail:
+ return retval;
+}
+
+
+static const char *mp_type(struct sb_uart_port *port)
+{
+ const char *str = NULL;
+
+ if (port->ops->type)
+ str = port->ops->type(port);
+
+ if (!str)
+ str = "unknown";
+
+ return str;
+}
+
+static void mp_change_pm(struct sb_uart_state *state, int pm_state)
+{
+ struct sb_uart_port *port = state->port;
+ if (port->ops->pm)
+ port->ops->pm(port, pm_state, state->pm_state);
+ state->pm_state = pm_state;
+}
+
+static inline void mp_report_port(struct uart_driver *drv, struct sb_uart_port *port)
+{
+ char address[64];
+
+ switch (port->iotype) {
+ case UPIO_PORT:
+ snprintf(address, sizeof(address),"I/O 0x%x", port->iobase);
+ break;
+ case UPIO_HUB6:
+ snprintf(address, sizeof(address),"I/O 0x%x offset 0x%x", port->iobase, port->hub6);
+ break;
+ case UPIO_MEM:
+ snprintf(address, sizeof(address),"MMIO 0x%lx", port->mapbase);
+ break;
+ default:
+ snprintf(address, sizeof(address),"*unknown*" );
+ strlcpy(address, "*unknown*", sizeof(address));
+ break;
+ }
+
+ printk( "%s%d at %s (irq = %d) is a %s\n",
+ drv->dev_name, port->line, address, port->irq, mp_type(port));
+
+}
+
+static void mp_configure_port(struct uart_driver *drv, struct sb_uart_state *state, struct sb_uart_port *port)
+{
+ unsigned int flags;
+
+
+ if (!port->iobase && !port->mapbase && !port->membase)
+ {
+ DPRINTK("%s error \n",__FUNCTION__);
+ return;
+ }
+ flags = UART_CONFIG_TYPE;
+ if (port->flags & UPF_AUTO_IRQ)
+ flags |= UART_CONFIG_IRQ;
+ if (port->flags & UPF_BOOT_AUTOCONF) {
+ port->type = PORT_UNKNOWN;
+ port->ops->config_port(port, flags);
+ }
+
+ if (port->type != PORT_UNKNOWN) {
+ unsigned long flags;
+
+ mp_report_port(drv, port);
+
+ spin_lock_irqsave(&port->lock, flags);
+ port->ops->set_mctrl(port, 0);
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ mp_change_pm(state, 3);
+ }
+}
+
+static void mp_unconfigure_port(struct uart_driver *drv, struct sb_uart_state *state)
+{
+ struct sb_uart_port *port = state->port;
+ struct sb_uart_info *info = state->info;
+
+ if (info && info->tty)
+ tty_hangup(info->tty);
+
+ MP_STATE_LOCK(state);
+
+ state->info = NULL;
+
+ if (port->type != PORT_UNKNOWN)
+ port->ops->release_port(port);
+
+ port->type = PORT_UNKNOWN;
+
+ if (info) {
+ tasklet_kill(&info->tlet);
+ kfree(info);
+ }
+
+ MP_STATE_UNLOCK(state);
+}
+static struct tty_operations mp_ops = {
+ .open = mp_open,
+ .close = mp_close,
+ .write = mp_write,
+ .put_char = mp_put_char,
+ .flush_chars = mp_put_chars,
+ .write_room = mp_write_room,
+ .chars_in_buffer= mp_chars_in_buffer,
+ .flush_buffer = mp_flush_buffer,
+ .ioctl = mp_ioctl,
+ .throttle = mp_throttle,
+ .unthrottle = mp_unthrottle,
+ .send_xchar = mp_send_xchar,
+ .set_termios = mp_set_termios,
+ .stop = mp_stop,
+ .start = mp_start,
+ .hangup = mp_hangup,
+ .break_ctl = mp_break_ctl,
+ .wait_until_sent= mp_wait_until_sent,
+#ifdef CONFIG_PROC_FS
+ .proc_fops = NULL,
+#endif
+ .tiocmget = mp_tiocmget,
+ .tiocmset = mp_tiocmset,
+};
+
+static int mp_register_driver(struct uart_driver *drv)
+{
+ struct tty_driver *normal = NULL;
+ int i, retval;
+
+ drv->state = kmalloc(sizeof(struct sb_uart_state) * drv->nr, GFP_KERNEL);
+ retval = -ENOMEM;
+ if (!drv->state)
+ {
+ printk("SB PCI Error: Kernel memory allocation error!\n");
+ goto out;
+ }
+ memset(drv->state, 0, sizeof(struct sb_uart_state) * drv->nr);
+
+ normal = alloc_tty_driver(drv->nr);
+ if (!normal)
+ {
+ printk("SB PCI Error: tty allocation error!\n");
+ goto out;
+ }
+
+ drv->tty_driver = normal;
+
+ normal->owner = drv->owner;
+ normal->magic = TTY_DRIVER_MAGIC;
+ normal->driver_name = drv->driver_name;
+ normal->name = drv->dev_name;
+ normal->major = drv->major;
+ normal->minor_start = drv->minor;
+
+ normal->num = MAX_MP_PORT ;
+
+ normal->type = TTY_DRIVER_TYPE_SERIAL;
+ normal->subtype = SERIAL_TYPE_NORMAL;
+ normal->init_termios = tty_std_termios;
+ normal->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+ normal->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
+ normal->driver_state = drv;
+
+ tty_set_operations(normal, &mp_ops);
+
+for (i = 0; i < drv->nr; i++) {
+ struct sb_uart_state *state = drv->state + i;
+
+ state->close_delay = 500;
+ state->closing_wait = 30000;
+
+ mutex_init(&state->mutex);
+ }
+
+ retval = tty_register_driver(normal);
+out:
+ if (retval < 0) {
+ printk("Register tty driver Fail!\n");
+ put_tty_driver(normal);
+ kfree(drv->state);
+ }
+
+ return retval;
+}
+
+void mp_unregister_driver(struct uart_driver *drv)
+{
+ struct tty_driver *normal = NULL;
+
+ normal = drv->tty_driver;
+
+ if (!normal)
+ {
+ return;
+ }
+
+ tty_unregister_driver(normal);
+ put_tty_driver(normal);
+ drv->tty_driver = NULL;
+
+
+ if (drv->state)
+ {
+ kfree(drv->state);
+ }
+
+}
+
+static int mp_add_one_port(struct uart_driver *drv, struct sb_uart_port *port)
+{
+ struct sb_uart_state *state;
+ int ret = 0;
+
+
+ if (port->line >= drv->nr)
+ return -EINVAL;
+
+ state = drv->state + port->line;
+
+ MP_MUTEX_LOCK(mp_mutex);
+ if (state->port) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ state->port = port;
+
+ spin_lock_init(&port->lock);
+ port->cons = drv->cons;
+ port->info = state->info;
+
+ mp_configure_port(drv, state, port);
+
+ tty_register_device(drv->tty_driver, port->line, port->dev);
+
+out:
+ MP_MUTEX_UNLOCK(mp_mutex);
+
+
+ return ret;
+}
+
+static int mp_remove_one_port(struct uart_driver *drv, struct sb_uart_port *port)
+{
+ struct sb_uart_state *state = drv->state + port->line;
+
+ if (state->port != port)
+ printk(KERN_ALERT "Removing wrong port: %p != %p\n",
+ state->port, port);
+
+ MP_MUTEX_LOCK(mp_mutex);
+
+ tty_unregister_device(drv->tty_driver, port->line);
+
+ mp_unconfigure_port(drv, state);
+ state->port = NULL;
+ MP_MUTEX_UNLOCK(mp_mutex);
+
+ return 0;
+}
+
+static void autoconfig(struct mp_port *mtpt, unsigned int probeflags)
+{
+ unsigned char status1, scratch, scratch2, scratch3;
+ unsigned char save_lcr, save_mcr;
+ unsigned long flags;
+
+ unsigned char u_type;
+ unsigned char b_ret = 0;
+
+ if (!mtpt->port.iobase && !mtpt->port.mapbase && !mtpt->port.membase)
+ return;
+
+ DEBUG_AUTOCONF("ttyMP%d: autoconf (0x%04x, 0x%p): ",
+ mtpt->port.line, mtpt->port.iobase, mtpt->port.membase);
+
+ spin_lock_irqsave(&mtpt->port.lock, flags);
+
+ if (!(mtpt->port.flags & UPF_BUGGY_UART)) {
+ scratch = serial_inp(mtpt, UART_IER);
+ serial_outp(mtpt, UART_IER, 0);
+#ifdef __i386__
+ outb(0xff, 0x080);
+#endif
+ scratch2 = serial_inp(mtpt, UART_IER) & 0x0f;
+ serial_outp(mtpt, UART_IER, 0x0F);
+#ifdef __i386__
+ outb(0, 0x080);
+#endif
+ scratch3 = serial_inp(mtpt, UART_IER) & 0x0F;
+ serial_outp(mtpt, UART_IER, scratch);
+ if (scratch2 != 0 || scratch3 != 0x0F) {
+ DEBUG_AUTOCONF("IER test failed (%02x, %02x) ",
+ scratch2, scratch3);
+ goto out;
+ }
+ }
+
+ save_mcr = serial_in(mtpt, UART_MCR);
+ save_lcr = serial_in(mtpt, UART_LCR);
+
+ if (!(mtpt->port.flags & UPF_SKIP_TEST)) {
+ serial_outp(mtpt, UART_MCR, UART_MCR_LOOP | 0x0A);
+ status1 = serial_inp(mtpt, UART_MSR) & 0xF0;
+ serial_outp(mtpt, UART_MCR, save_mcr);
+ if (status1 != 0x90) {
+ DEBUG_AUTOCONF("LOOP test failed (%02x) ",
+ status1);
+ goto out;
+ }
+ }
+
+ serial_outp(mtpt, UART_LCR, 0xBF);
+ serial_outp(mtpt, UART_EFR, 0);
+ serial_outp(mtpt, UART_LCR, 0);
+
+ serial_outp(mtpt, UART_FCR, UART_FCR_ENABLE_FIFO);
+ scratch = serial_in(mtpt, UART_IIR) >> 6;
+
+ DEBUG_AUTOCONF("iir=%d ", scratch);
+ if(mtpt->device->nr_ports >= 8)
+ b_ret = read_option_register(mtpt,(MP_OPTR_DIR0 + ((mtpt->port.line)/8)));
+ else
+ b_ret = read_option_register(mtpt,MP_OPTR_DIR0);
+ u_type = (b_ret & 0xf0) >> 4;
+ if(mtpt->port.type == PORT_UNKNOWN )
+ {
+ switch (u_type)
+ {
+ case DIR_UART_16C550:
+ mtpt->port.type = PORT_16C55X;
+ break;
+ case DIR_UART_16C1050:
+ mtpt->port.type = PORT_16C105X;
+ break;
+ case DIR_UART_16C1050A:
+ if (mtpt->port.line < 2)
+ {
+ mtpt->port.type = PORT_16C105XA;
+ }
+ else
+ {
+ if (mtpt->device->device_id & 0x50)
+ {
+ mtpt->port.type = PORT_16C55X;
+ }
+ else
+ {
+ mtpt->port.type = PORT_16C105X;
+ }
+ }
+ break;
+ default:
+ mtpt->port.type = PORT_UNKNOWN;
+ break;
+ }
+ }
+
+ if(mtpt->port.type == PORT_UNKNOWN )
+ {
+printk("unknow2\n");
+ switch (scratch) {
+ case 0:
+ case 1:
+ mtpt->port.type = PORT_UNKNOWN;
+ break;
+ case 2:
+ case 3:
+ mtpt->port.type = PORT_16C55X;
+ break;
+ }
+ }
+
+ serial_outp(mtpt, UART_LCR, save_lcr);
+
+ mtpt->port.fifosize = uart_config[mtpt->port.type].dfl_xmit_fifo_size;
+ mtpt->capabilities = uart_config[mtpt->port.type].flags;
+
+ if (mtpt->port.type == PORT_UNKNOWN)
+ goto out;
+ serial_outp(mtpt, UART_MCR, save_mcr);
+ serial_outp(mtpt, UART_FCR, (UART_FCR_ENABLE_FIFO |
+ UART_FCR_CLEAR_RCVR |
+ UART_FCR_CLEAR_XMIT));
+ serial_outp(mtpt, UART_FCR, 0);
+ (void)serial_in(mtpt, UART_RX);
+ serial_outp(mtpt, UART_IER, 0);
+
+out:
+ spin_unlock_irqrestore(&mtpt->port.lock, flags);
+ DEBUG_AUTOCONF("type=%s\n", uart_config[mtpt->port.type].name);
+}
+
+static void autoconfig_irq(struct mp_port *mtpt)
+{
+ unsigned char save_mcr, save_ier;
+ unsigned long irqs;
+ int irq;
+
+ /* forget possible initially masked and pending IRQ */
+ probe_irq_off(probe_irq_on());
+ save_mcr = serial_inp(mtpt, UART_MCR);
+ save_ier = serial_inp(mtpt, UART_IER);
+ serial_outp(mtpt, UART_MCR, UART_MCR_OUT1 | UART_MCR_OUT2);
+
+ irqs = probe_irq_on();
+ serial_outp(mtpt, UART_MCR, 0);
+ serial_outp(mtpt, UART_MCR,
+ UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2);
+
+ serial_outp(mtpt, UART_IER, 0x0f); /* enable all intrs */
+ (void)serial_inp(mtpt, UART_LSR);
+ (void)serial_inp(mtpt, UART_RX);
+ (void)serial_inp(mtpt, UART_IIR);
+ (void)serial_inp(mtpt, UART_MSR);
+ serial_outp(mtpt, UART_TX, 0xFF);
+ irq = probe_irq_off(irqs);
+
+ serial_outp(mtpt, UART_MCR, save_mcr);
+ serial_outp(mtpt, UART_IER, save_ier);
+
+ mtpt->port.irq = (irq > 0) ? irq : 0;
+}
+
+static void multi_stop_tx(struct sb_uart_port *port)
+{
+ struct mp_port *mtpt = (struct mp_port *)port;
+
+ if (mtpt->ier & UART_IER_THRI) {
+ mtpt->ier &= ~UART_IER_THRI;
+ serial_out(mtpt, UART_IER, mtpt->ier);
+ }
+
+ tasklet_schedule(&port->info->tlet);
+}
+
+static void multi_start_tx(struct sb_uart_port *port)
+{
+ struct mp_port *mtpt = (struct mp_port *)port;
+
+ if (!(mtpt->ier & UART_IER_THRI)) {
+ mtpt->ier |= UART_IER_THRI;
+ serial_out(mtpt, UART_IER, mtpt->ier);
+ }
+}
+
+static void multi_stop_rx(struct sb_uart_port *port)
+{
+ struct mp_port *mtpt = (struct mp_port *)port;
+
+ mtpt->ier &= ~UART_IER_RLSI;
+ mtpt->port.read_status_mask &= ~UART_LSR_DR;
+ serial_out(mtpt, UART_IER, mtpt->ier);
+}
+
+static void multi_enable_ms(struct sb_uart_port *port)
+{
+ struct mp_port *mtpt = (struct mp_port *)port;
+
+ mtpt->ier |= UART_IER_MSI;
+ serial_out(mtpt, UART_IER, mtpt->ier);
+}
+
+
+static _INLINE_ void receive_chars(struct mp_port *mtpt, int *status )
+{
+ struct tty_struct *tty = mtpt->port.info->tty;
+ unsigned char lsr = *status;
+ int max_count = 256;
+ unsigned char ch;
+ char flag;
+
+ //lsr &= mtpt->port.read_status_mask;
+
+ do {
+ if ((lsr & UART_LSR_PE) && (mtpt->port.mdmode & MDMODE_ENABLE))
+ {
+ ch = serial_inp(mtpt, UART_RX);
+ }
+ else if (lsr & UART_LSR_SPECIAL)
+ {
+ flag = 0;
+ ch = serial_inp(mtpt, UART_RX);
+
+ if (lsr & UART_LSR_BI)
+ {
+
+ mtpt->port.icount.brk++;
+ flag = TTY_BREAK;
+
+ if (sb_uart_handle_break(&mtpt->port))
+ goto ignore_char;
+ }
+ if (lsr & UART_LSR_PE)
+ {
+ mtpt->port.icount.parity++;
+ flag = TTY_PARITY;
+ }
+ if (lsr & UART_LSR_FE)
+ {
+ mtpt->port.icount.frame++;
+ flag = TTY_FRAME;
+ }
+ if (lsr & UART_LSR_OE)
+ {
+ mtpt->port.icount.overrun++;
+ flag = TTY_OVERRUN;
+ }
+ tty_insert_flip_char(tty, ch, flag);
+ }
+ else
+ {
+ ch = serial_inp(mtpt, UART_RX);
+ tty_insert_flip_char(tty, ch, 0);
+ }
+ignore_char:
+ lsr = serial_inp(mtpt, UART_LSR);
+ } while ((lsr & UART_LSR_DR) && (max_count-- > 0));
+
+ tty_flip_buffer_push(tty);
+}
+
+
+
+
+static _INLINE_ void transmit_chars(struct mp_port *mtpt)
+{
+ struct circ_buf *xmit = &mtpt->port.info->xmit;
+ int count;
+
+ if (mtpt->port.x_char) {
+ serial_outp(mtpt, UART_TX, mtpt->port.x_char);
+ mtpt->port.icount.tx++;
+ mtpt->port.x_char = 0;
+ return;
+ }
+ if (uart_circ_empty(xmit) || uart_tx_stopped(&mtpt->port)) {
+ multi_stop_tx(&mtpt->port);
+ return;
+ }
+
+ count = uart_circ_chars_pending(xmit);
+
+ if(count > mtpt->port.fifosize)
+ {
+ count = mtpt->port.fifosize;
+ }
+
+ printk("[%d] mdmode: %x\n", mtpt->port.line, mtpt->port.mdmode);
+ do {
+#if 0
+ /* check multi-drop mode */
+ if ((mtpt->port.mdmode & (MDMODE_ENABLE | MDMODE_ADDR)) == (MDMODE_ENABLE | MDMODE_ADDR))
+ {
+ printk("send address\n");
+ /* send multi-drop address */
+ serial_out(mtpt, UART_SCR, xmit->buf[xmit->tail]);
+ }
+ else
+#endif
+ {
+ serial_out(mtpt, UART_TX, xmit->buf[xmit->tail]);
+ }
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ mtpt->port.icount.tx++;
+ } while (--count > 0);
+}
+
+
+
+static _INLINE_ void check_modem_status(struct mp_port *mtpt)
+{
+ int status;
+
+ status = serial_in(mtpt, UART_MSR);
+
+ if ((status & UART_MSR_ANY_DELTA) == 0)
+ return;
+
+ if (status & UART_MSR_TERI)
+ mtpt->port.icount.rng++;
+ if (status & UART_MSR_DDSR)
+ mtpt->port.icount.dsr++;
+ if (status & UART_MSR_DDCD)
+ sb_uart_handle_dcd_change(&mtpt->port, status & UART_MSR_DCD);
+ if (status & UART_MSR_DCTS)
+ sb_uart_handle_cts_change(&mtpt->port, status & UART_MSR_CTS);
+
+ wake_up_interruptible(&mtpt->port.info->delta_msr_wait);
+}
+
+static inline void multi_handle_port(struct mp_port *mtpt)
+{
+ unsigned int status = serial_inp(mtpt, UART_LSR);
+
+ //printk("lsr: %x\n", status);
+
+ if ((status & UART_LSR_DR) || (status & UART_LSR_SPECIAL))
+ receive_chars(mtpt, &status);
+ check_modem_status(mtpt);
+ if (status & UART_LSR_THRE)
+ {
+ if ((mtpt->port.type == PORT_16C105X)
+ || (mtpt->port.type == PORT_16C105XA))
+ transmit_chars(mtpt);
+ else
+ {
+ if (mtpt->interface >= RS485NE)
+ uart_set_mctrl(&mtpt->port, TIOCM_RTS);
+
+ transmit_chars(mtpt);
+
+
+ if (mtpt->interface >= RS485NE)
+ {
+ while((status=serial_in(mtpt,UART_LSR) &0x60)!=0x60);
+ uart_clear_mctrl(&mtpt->port, TIOCM_RTS);
+ }
+ }
+ }
+}
+
+
+
+static irqreturn_t multi_interrupt(int irq, void *dev_id)
+{
+ struct irq_info *iinfo = dev_id;
+ struct list_head *lhead, *end = NULL;
+ int pass_counter = 0;
+
+
+ spin_lock(&iinfo->lock);
+
+ lhead = iinfo->head;
+ do {
+ struct mp_port *mtpt;
+ unsigned int iir;
+
+ mtpt = list_entry(lhead, struct mp_port, list);
+
+ iir = serial_in(mtpt, UART_IIR);
+ printk("intrrupt! port %d, iir 0x%x\n", mtpt->port.line, iir); //wlee
+ if (!(iir & UART_IIR_NO_INT))
+ {
+ printk("interrupt handle\n");
+ spin_lock(&mtpt->port.lock);
+ multi_handle_port(mtpt);
+ spin_unlock(&mtpt->port.lock);
+
+ end = NULL;
+ } else if (end == NULL)
+ end = lhead;
+
+ lhead = lhead->next;
+ if (lhead == iinfo->head && pass_counter++ > PASS_LIMIT)
+ {
+ printk(KERN_ERR "multi: too much work for "
+ "irq%d\n", irq);
+ printk( "multi: too much work for "
+ "irq%d\n", irq);
+ break;
+ }
+ } while (lhead != end);
+
+ spin_unlock(&iinfo->lock);
+
+
+ return IRQ_HANDLED;
+}
+
+static void serial_do_unlink(struct irq_info *i, struct mp_port *mtpt)
+{
+ spin_lock_irq(&i->lock);
+
+ if (!list_empty(i->head)) {
+ if (i->head == &mtpt->list)
+ i->head = i->head->next;
+ list_del(&mtpt->list);
+ } else {
+ i->head = NULL;
+ }
+
+ spin_unlock_irq(&i->lock);
+}
+
+static int serial_link_irq_chain(struct mp_port *mtpt)
+{
+ struct irq_info *i = irq_lists + mtpt->port.irq;
+ int ret, irq_flags = mtpt->port.flags & UPF_SHARE_IRQ ? IRQF_SHARED : 0;
+ spin_lock_irq(&i->lock);
+
+ if (i->head) {
+ list_add(&mtpt->list, i->head);
+ spin_unlock_irq(&i->lock);
+
+ ret = 0;
+ } else {
+ INIT_LIST_HEAD(&mtpt->list);
+ i->head = &mtpt->list;
+ spin_unlock_irq(&i->lock);
+
+ ret = request_irq(mtpt->port.irq, multi_interrupt,
+ irq_flags, "serial", i);
+ if (ret < 0)
+ serial_do_unlink(i, mtpt);
+ }
+
+ return ret;
+}
+
+
+
+
+static void serial_unlink_irq_chain(struct mp_port *mtpt)
+{
+ struct irq_info *i = irq_lists + mtpt->port.irq;
+
+ if (list_empty(i->head))
+ {
+ free_irq(mtpt->port.irq, i);
+ }
+ serial_do_unlink(i, mtpt);
+}
+
+static void multi_timeout(unsigned long data)
+{
+ struct mp_port *mtpt = (struct mp_port *)data;
+
+
+ spin_lock(&mtpt->port.lock);
+ multi_handle_port(mtpt);
+ spin_unlock(&mtpt->port.lock);
+
+ mod_timer(&mtpt->timer, jiffies+1 );
+}
+
+static unsigned int multi_tx_empty(struct sb_uart_port *port)
+{
+ struct mp_port *mtpt = (struct mp_port *)port;
+ unsigned long flags;
+ unsigned int ret;
+
+ spin_lock_irqsave(&mtpt->port.lock, flags);
+ ret = serial_in(mtpt, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0;
+ spin_unlock_irqrestore(&mtpt->port.lock, flags);
+
+ return ret;
+}
+
+
+static unsigned int multi_get_mctrl(struct sb_uart_port *port)
+{
+ struct mp_port *mtpt = (struct mp_port *)port;
+ unsigned char status;
+ unsigned int ret;
+
+ status = serial_in(mtpt, UART_MSR);
+
+ ret = 0;
+ if (status & UART_MSR_DCD)
+ ret |= TIOCM_CAR;
+ if (status & UART_MSR_RI)
+ ret |= TIOCM_RNG;
+ if (status & UART_MSR_DSR)
+ ret |= TIOCM_DSR;
+ if (status & UART_MSR_CTS)
+ ret |= TIOCM_CTS;
+ return ret;
+}
+
+static void multi_set_mctrl(struct sb_uart_port *port, unsigned int mctrl)
+{
+ struct mp_port *mtpt = (struct mp_port *)port;
+ unsigned char mcr = 0;
+
+ mctrl &= 0xff;
+
+ if (mctrl & TIOCM_RTS)
+ mcr |= UART_MCR_RTS;
+ if (mctrl & TIOCM_DTR)
+ mcr |= UART_MCR_DTR;
+ if (mctrl & TIOCM_OUT1)
+ mcr |= UART_MCR_OUT1;
+ if (mctrl & TIOCM_OUT2)
+ mcr |= UART_MCR_OUT2;
+ if (mctrl & TIOCM_LOOP)
+ mcr |= UART_MCR_LOOP;
+
+
+ serial_out(mtpt, UART_MCR, mcr);
+}
+
+
+static void multi_break_ctl(struct sb_uart_port *port, int break_state)
+{
+ struct mp_port *mtpt = (struct mp_port *)port;
+ unsigned long flags;
+
+ spin_lock_irqsave(&mtpt->port.lock, flags);
+ if (break_state == -1)
+ mtpt->lcr |= UART_LCR_SBC;
+ else
+ mtpt->lcr &= ~UART_LCR_SBC;
+ serial_out(mtpt, UART_LCR, mtpt->lcr);
+ spin_unlock_irqrestore(&mtpt->port.lock, flags);
+}
+
+
+
+static int multi_startup(struct sb_uart_port *port)
+{
+ struct mp_port *mtpt = (struct mp_port *)port;
+ unsigned long flags;
+ int retval;
+
+ mtpt->capabilities = uart_config[mtpt->port.type].flags;
+ mtpt->mcr = 0;
+
+ if (mtpt->capabilities & UART_CLEAR_FIFO) {
+ serial_outp(mtpt, UART_FCR, UART_FCR_ENABLE_FIFO);
+ serial_outp(mtpt, UART_FCR, UART_FCR_ENABLE_FIFO |
+ UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
+ serial_outp(mtpt, UART_FCR, 0);
+ }
+
+ (void) serial_inp(mtpt, UART_LSR);
+ (void) serial_inp(mtpt, UART_RX);
+ (void) serial_inp(mtpt, UART_IIR);
+ (void) serial_inp(mtpt, UART_MSR);
+ //test-wlee 9-bit disable
+ serial_outp(mtpt, UART_MSR, 0);
+
+
+ if (!(mtpt->port.flags & UPF_BUGGY_UART) &&
+ (serial_inp(mtpt, UART_LSR) == 0xff)) {
+ printk("ttyS%d: LSR safety check engaged!\n", mtpt->port.line);
+ //return -ENODEV;
+ }
+
+ if ((!is_real_interrupt(mtpt->port.irq)) || (mtpt->poll_type==TYPE_POLL)) {
+ unsigned int timeout = mtpt->port.timeout;
+
+ timeout = timeout > 6 ? (timeout / 2 - 2) : 1;
+
+ mtpt->timer.data = (unsigned long)mtpt;
+ mod_timer(&mtpt->timer, jiffies + timeout);
+ }
+ else
+ {
+ retval = serial_link_irq_chain(mtpt);
+ if (retval)
+ return retval;
+ }
+
+ serial_outp(mtpt, UART_LCR, UART_LCR_WLEN8);
+
+ spin_lock_irqsave(&mtpt->port.lock, flags);
+ if ((is_real_interrupt(mtpt->port.irq))||(mtpt->poll_type==TYPE_INTERRUPT))
+ mtpt->port.mctrl |= TIOCM_OUT2;
+
+ multi_set_mctrl(&mtpt->port, mtpt->port.mctrl);
+ spin_unlock_irqrestore(&mtpt->port.lock, flags);
+
+
+ mtpt->ier = UART_IER_RLSI | UART_IER_RDI;
+ serial_outp(mtpt, UART_IER, mtpt->ier);
+
+ (void) serial_inp(mtpt, UART_LSR);
+ (void) serial_inp(mtpt, UART_RX);
+ (void) serial_inp(mtpt, UART_IIR);
+ (void) serial_inp(mtpt, UART_MSR);
+
+ return 0;
+}
+
+
+
+static void multi_shutdown(struct sb_uart_port *port)
+{
+ struct mp_port *mtpt = (struct mp_port *)port;
+ unsigned long flags;
+
+
+ mtpt->ier = 0;
+ serial_outp(mtpt, UART_IER, 0);
+
+ spin_lock_irqsave(&mtpt->port.lock, flags);
+ mtpt->port.mctrl &= ~TIOCM_OUT2;
+
+ multi_set_mctrl(&mtpt->port, mtpt->port.mctrl);
+ spin_unlock_irqrestore(&mtpt->port.lock, flags);
+
+ serial_out(mtpt, UART_LCR, serial_inp(mtpt, UART_LCR) & ~UART_LCR_SBC);
+ serial_outp(mtpt, UART_FCR, UART_FCR_ENABLE_FIFO |
+ UART_FCR_CLEAR_RCVR |
+ UART_FCR_CLEAR_XMIT);
+ serial_outp(mtpt, UART_FCR, 0);
+
+
+ (void) serial_in(mtpt, UART_RX);
+
+ if ((!is_real_interrupt(mtpt->port.irq))||(mtpt->poll_type==TYPE_POLL))
+ {
+ del_timer_sync(&mtpt->timer);
+ }
+ else
+ {
+ serial_unlink_irq_chain(mtpt);
+ }
+}
+
+
+
+static unsigned int multi_get_divisor(struct sb_uart_port *port, unsigned int baud)
+{
+ unsigned int quot;
+
+ if ((port->flags & UPF_MAGIC_MULTIPLIER) &&
+ baud == (port->uartclk/4))
+ quot = 0x8001;
+ else if ((port->flags & UPF_MAGIC_MULTIPLIER) &&
+ baud == (port->uartclk/8))
+ quot = 0x8002;
+ else
+ quot = sb_uart_get_divisor(port, baud);
+
+ return quot;
+}
+
+
+
+
+static void multi_set_termios(struct sb_uart_port *port, struct MP_TERMIOS *termios, struct MP_TERMIOS *old)
+{
+ struct mp_port *mtpt = (struct mp_port *)port;
+ unsigned char cval, fcr = 0;
+ unsigned long flags;
+ unsigned int baud, quot;
+
+ switch (termios->c_cflag & CSIZE) {
+ case CS5:
+ cval = 0x00;
+ break;
+ case CS6:
+ cval = 0x01;
+ break;
+ case CS7:
+ cval = 0x02;
+ break;
+ default:
+ case CS8:
+ cval = 0x03;
+ break;
+ }
+
+ if (termios->c_cflag & CSTOPB)
+ cval |= 0x04;
+ if (termios->c_cflag & PARENB)
+ cval |= UART_LCR_PARITY;
+ if (!(termios->c_cflag & PARODD))
+ cval |= UART_LCR_EPAR;
+
+#ifdef CMSPAR
+ if (termios->c_cflag & CMSPAR)
+ cval |= UART_LCR_SPAR;
+#endif
+
+ baud = sb_uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
+ quot = multi_get_divisor(port, baud);
+
+ if (mtpt->capabilities & UART_USE_FIFO) {
+ //if (baud < 2400)
+ // fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_1;
+ //else
+ // fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_8;
+
+ // fcr = UART_FCR_ENABLE_FIFO | 0x90;
+ fcr = fcr_arr[mtpt->port.line];
+ }
+
+ spin_lock_irqsave(&mtpt->port.lock, flags);
+
+ sb_uart_update_timeout(port, termios->c_cflag, baud);
+
+ mtpt->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR;
+ if (termios->c_iflag & INPCK)
+ mtpt->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE;
+ if (termios->c_iflag & (BRKINT | PARMRK))
+ mtpt->port.read_status_mask |= UART_LSR_BI;
+
+ mtpt->port.ignore_status_mask = 0;
+ if (termios->c_iflag & IGNPAR)
+ mtpt->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE;
+ if (termios->c_iflag & IGNBRK) {
+ mtpt->port.ignore_status_mask |= UART_LSR_BI;
+ if (termios->c_iflag & IGNPAR)
+ mtpt->port.ignore_status_mask |= UART_LSR_OE;
+ }
+
+ if ((termios->c_cflag & CREAD) == 0)
+ mtpt->port.ignore_status_mask |= UART_LSR_DR;
+
+ mtpt->ier &= ~UART_IER_MSI;
+ if (UART_ENABLE_MS(&mtpt->port, termios->c_cflag))
+ mtpt->ier |= UART_IER_MSI;
+
+ serial_out(mtpt, UART_IER, mtpt->ier);
+
+ if (mtpt->capabilities & UART_STARTECH) {
+ serial_outp(mtpt, UART_LCR, 0xBF);
+ serial_outp(mtpt, UART_EFR,
+ termios->c_cflag & CRTSCTS ? UART_EFR_CTS :0);
+ }
+
+ serial_outp(mtpt, UART_LCR, cval | UART_LCR_DLAB);/* set DLAB */
+
+ serial_outp(mtpt, UART_DLL, quot & 0xff); /* LS of divisor */
+ serial_outp(mtpt, UART_DLM, quot >> 8); /* MS of divisor */
+
+ serial_outp(mtpt, UART_LCR, cval); /* reset DLAB */
+ mtpt->lcr = cval; /* Save LCR */
+
+ if (fcr & UART_FCR_ENABLE_FIFO) {
+ /* emulated UARTs (Lucent Venus 167x) need two steps */
+ serial_outp(mtpt, UART_FCR, UART_FCR_ENABLE_FIFO);
+ }
+
+ serial_outp(mtpt, UART_FCR, fcr); /* set fcr */
+
+
+ if ((mtpt->port.type == PORT_16C105X)
+ || (mtpt->port.type == PORT_16C105XA))
+ {
+ if(deep[mtpt->port.line]!=0)
+ set_deep_fifo(port, ENABLE);
+
+ if (mtpt->interface != RS232)
+ set_auto_rts(port,mtpt->interface);
+
+ }
+ else
+ {
+ if (mtpt->interface >= RS485NE)
+ {
+ uart_clear_mctrl(&mtpt->port, TIOCM_RTS);
+ }
+ }
+
+ if(mtpt->device->device_id == PCI_DEVICE_ID_MP4M)
+ {
+ SendATCommand(mtpt);
+ printk("SendATCommand\n");
+ }
+ multi_set_mctrl(&mtpt->port, mtpt->port.mctrl);
+ spin_unlock_irqrestore(&mtpt->port.lock, flags);
+}
+
+static void multi_pm(struct sb_uart_port *port, unsigned int state, unsigned int oldstate)
+{
+ struct mp_port *mtpt = (struct mp_port *)port;
+ if (state) {
+ if (mtpt->capabilities & UART_STARTECH) {
+ serial_outp(mtpt, UART_LCR, 0xBF);
+ serial_outp(mtpt, UART_EFR, UART_EFR_ECB);
+ serial_outp(mtpt, UART_LCR, 0);
+ serial_outp(mtpt, UART_IER, UART_IERX_SLEEP);
+ serial_outp(mtpt, UART_LCR, 0xBF);
+ serial_outp(mtpt, UART_EFR, 0);
+ serial_outp(mtpt, UART_LCR, 0);
+ }
+
+ if (mtpt->pm)
+ mtpt->pm(port, state, oldstate);
+ }
+ else
+ {
+ if (mtpt->capabilities & UART_STARTECH) {
+ serial_outp(mtpt, UART_LCR, 0xBF);
+ serial_outp(mtpt, UART_EFR, UART_EFR_ECB);
+ serial_outp(mtpt, UART_LCR, 0);
+ serial_outp(mtpt, UART_IER, 0);
+ serial_outp(mtpt, UART_LCR, 0xBF);
+ serial_outp(mtpt, UART_EFR, 0);
+ serial_outp(mtpt, UART_LCR, 0);
+ }
+
+ if (mtpt->pm)
+ mtpt->pm(port, state, oldstate);
+ }
+}
+
+static void multi_release_std_resource(struct mp_port *mtpt)
+{
+ unsigned int size = 8 << mtpt->port.regshift;
+
+ switch (mtpt->port.iotype) {
+ case UPIO_MEM:
+ if (!mtpt->port.mapbase)
+ break;
+
+ if (mtpt->port.flags & UPF_IOREMAP) {
+ iounmap(mtpt->port.membase);
+ mtpt->port.membase = NULL;
+ }
+
+ release_mem_region(mtpt->port.mapbase, size);
+ break;
+
+ case UPIO_HUB6:
+ case UPIO_PORT:
+ release_region(mtpt->port.iobase,size);
+ break;
+ }
+}
+
+static void multi_release_port(struct sb_uart_port *port)
+{
+}
+
+static int multi_request_port(struct sb_uart_port *port)
+{
+ return 0;
+}
+
+static void multi_config_port(struct sb_uart_port *port, int flags)
+{
+ struct mp_port *mtpt = (struct mp_port *)port;
+ int probeflags = PROBE_ANY;
+
+ if (flags & UART_CONFIG_TYPE)
+ autoconfig(mtpt, probeflags);
+ if (mtpt->port.type != PORT_UNKNOWN && flags & UART_CONFIG_IRQ)
+ autoconfig_irq(mtpt);
+
+ if (mtpt->port.type == PORT_UNKNOWN)
+ multi_release_std_resource(mtpt);
+}
+
+static int multi_verify_port(struct sb_uart_port *port, struct serial_struct *ser)
+{
+ if (ser->irq >= NR_IRQS || ser->irq < 0 ||
+ ser->baud_base < 9600 || ser->type < PORT_UNKNOWN ||
+ ser->type == PORT_STARTECH)
+ return -EINVAL;
+ return 0;
+}
+
+static const char * multi_type(struct sb_uart_port *port)
+{
+ int type = port->type;
+
+ if (type >= ARRAY_SIZE(uart_config))
+ type = 0;
+ return uart_config[type].name;
+}
+
+static struct sb_uart_ops multi_pops = {
+ .tx_empty = multi_tx_empty,
+ .set_mctrl = multi_set_mctrl,
+ .get_mctrl = multi_get_mctrl,
+ .stop_tx = multi_stop_tx,
+ .start_tx = multi_start_tx,
+ .stop_rx = multi_stop_rx,
+ .enable_ms = multi_enable_ms,
+ .break_ctl = multi_break_ctl,
+ .startup = multi_startup,
+ .shutdown = multi_shutdown,
+ .set_termios = multi_set_termios,
+ .pm = multi_pm,
+ .type = multi_type,
+ .release_port = multi_release_port,
+ .request_port = multi_request_port,
+ .config_port = multi_config_port,
+ .verify_port = multi_verify_port,
+};
+
+static struct uart_driver multi_reg = {
+ .owner = THIS_MODULE,
+ .driver_name = "goldel_tulip",
+ .dev_name = "ttyMP",
+ .major = SB_TTY_MP_MAJOR,
+ .minor = 0,
+ .nr = MAX_MP_PORT,
+ .cons = NULL,
+};
+
+static void __init multi_init_ports(void)
+{
+ struct mp_port *mtpt;
+ static int first = 1;
+ int i,j,k;
+ unsigned char osc;
+ unsigned char b_ret = 0;
+ static struct mp_device_t * sbdev;
+
+ if (!first)
+ return;
+ first = 0;
+
+ mtpt = multi_ports;
+
+ for (k=0;k<NR_BOARD;k++)
+ {
+ sbdev = &mp_devs[k];
+
+ for (i = 0; i < sbdev->nr_ports; i++, mtpt++)
+ {
+ mtpt->device = sbdev;
+ mtpt->port.iobase = sbdev->uart_access_addr + 8*i;
+ mtpt->port.irq = sbdev->irq;
+ if ( ((sbdev->device_id == PCI_DEVICE_ID_MP4)&&(sbdev->revision==0x91)))
+ mtpt->interface_config_addr = sbdev->option_reg_addr + 0x08 + i;
+ else if (sbdev->revision == 0xc0)
+ mtpt->interface_config_addr = sbdev->option_reg_addr + 0x08 + (i & 0x1);
+ else
+ mtpt->interface_config_addr = sbdev->option_reg_addr + 0x08 + i/8;
+
+ mtpt->option_base_addr = sbdev->option_reg_addr;
+
+ mtpt->poll_type = sbdev->poll_type;
+
+ mtpt->port.uartclk = BASE_BAUD * 16;
+
+ /* get input clock infomation */
+ osc = inb(sbdev->option_reg_addr + MP_OPTR_DIR0 + i/8) & 0x0F;
+ if (osc==0x0f)
+ osc = 0;
+ for(j=0;j<osc;j++)
+ mtpt->port.uartclk *= 2;
+ mtpt->port.flags |= STD_COM_FLAGS | UPF_SHARE_IRQ ;
+ mtpt->port.iotype = UPIO_PORT;
+ mtpt->port.ops = &multi_pops;
+
+ if (sbdev->revision == 0xc0)
+ {
+ /* for SB16C1053APCI */
+ b_ret = sb1053a_get_interface(mtpt, i);
+ }
+ else
+ {
+ b_ret = read_option_register(mtpt,(MP_OPTR_IIR0 + i/8));
+ printk("IIR_RET = %x\n",b_ret);
+ }
+
+ if(IIR_RS232 == (b_ret & IIR_RS232))
+ {
+ mtpt->interface = RS232;
+ }
+ if(IIR_RS422 == (b_ret & IIR_RS422))
+ {
+ mtpt->interface = RS422PTP;
+ }
+ if(IIR_RS485 == (b_ret & IIR_RS485))
+ {
+ mtpt->interface = RS485NE;
+ }
+ }
+ }
+}
+
+static void __init multi_register_ports(struct uart_driver *drv)
+{
+ int i;
+
+ multi_init_ports();
+
+ for (i = 0; i < NR_PORTS; i++) {
+ struct mp_port *mtpt = &multi_ports[i];
+
+ mtpt->port.line = i;
+ mtpt->port.ops = &multi_pops;
+ init_timer(&mtpt->timer);
+ mtpt->timer.function = multi_timeout;
+ mp_add_one_port(drv, &mtpt->port);
+ }
+}
+
+/**
+ * pci_remap_base - remap BAR value of pci device
+ *
+ * PARAMETERS
+ * pcidev - pci_dev structure address
+ * offset - BAR offset PCI_BASE_ADDRESS_0 ~ PCI_BASE_ADDRESS_4
+ * address - address to be changed BAR value
+ * size - size of address space
+ *
+ * RETURNS
+ * If this function performs successful, it returns 0. Otherwise, It returns -1.
+ */
+static int pci_remap_base(struct pci_dev *pcidev, unsigned int offset,
+ unsigned int address, unsigned int size)
+{
+#if 0
+ struct resource *root;
+ unsigned index = (offset - 0x10) >> 2;
+#endif
+
+ pci_write_config_dword(pcidev, offset, address);
+#if 0
+ root = pcidev->resource[index].parent;
+ release_resource(&pcidev->resource[index]);
+ address &= ~0x1;
+ pcidev->resource[index].start = address;
+ pcidev->resource[index].end = address + size - 1;
+
+ if (request_resource(root, &pcidev->resource[index]) != NULL)
+ {
+ printk(KERN_ERR "pci remap conflict!! 0x%x\n", address);
+ return (-1);
+ }
+#endif
+
+ return (0);
+}
+
+static int init_mp_dev(struct pci_dev *pcidev, mppcibrd_t brd)
+{
+ static struct mp_device_t * sbdev = mp_devs;
+ unsigned long addr = 0;
+ int j;
+ struct resource * ret = NULL;
+
+ sbdev->device_id = brd.device_id;
+ pci_read_config_byte(pcidev, PCI_CLASS_REVISION, &(sbdev->revision));
+ sbdev->name = brd.name;
+ sbdev->uart_access_addr = pcidev->resource[0].start & PCI_BASE_ADDRESS_IO_MASK;
+
+ /* check revision. The SB16C1053APCI's option i/o address is BAR4 */
+ if (sbdev->revision == 0xc0)
+ {
+ /* SB16C1053APCI */
+ sbdev->option_reg_addr = pcidev->resource[4].start & PCI_BASE_ADDRESS_IO_MASK;
+ }
+ else
+ {
+ sbdev->option_reg_addr = pcidev->resource[1].start & PCI_BASE_ADDRESS_IO_MASK;
+ }
+#if 1
+ if (sbdev->revision == 0xc0)
+ {
+ outb(0x00, sbdev->option_reg_addr + MP_OPTR_GPOCR);
+ inb(sbdev->option_reg_addr + MP_OPTR_GPOCR);
+ outb(0x83, sbdev->option_reg_addr + MP_OPTR_GPOCR);
+ }
+#endif
+
+ sbdev->irq = pcidev->irq;
+
+ if ((brd.device_id & 0x0800) || !(brd.device_id &0xff00))
+ {
+ sbdev->poll_type = TYPE_INTERRUPT;
+ }
+ else
+ {
+ sbdev->poll_type = TYPE_POLL;
+ }
+
+ /* codes which is specific to each board*/
+ switch(brd.device_id){
+ case PCI_DEVICE_ID_MP1 :
+ case PCIE_DEVICE_ID_MP1 :
+ case PCIE_DEVICE_ID_MP1E :
+ case PCIE_DEVICE_ID_GT_MP1 :
+ sbdev->nr_ports = 1;
+ break;
+ case PCI_DEVICE_ID_MP2 :
+ case PCIE_DEVICE_ID_MP2 :
+ case PCIE_DEVICE_ID_GT_MP2 :
+ case PCIE_DEVICE_ID_MP2B :
+ case PCIE_DEVICE_ID_MP2E :
+ sbdev->nr_ports = 2;
+
+ /* serial base address remap */
+ if (sbdev->revision == 0xc0)
+ {
+ int prev_port_addr = 0;
+
+ pci_read_config_dword(pcidev, PCI_BASE_ADDRESS_0, &prev_port_addr);
+ pci_remap_base(pcidev, PCI_BASE_ADDRESS_1, prev_port_addr + 8, 8);
+ }
+ break;
+ case PCI_DEVICE_ID_MP4 :
+ case PCI_DEVICE_ID_MP4A :
+ case PCIE_DEVICE_ID_MP4 :
+ case PCI_DEVICE_ID_GT_MP4 :
+ case PCI_DEVICE_ID_GT_MP4A :
+ case PCIE_DEVICE_ID_GT_MP4 :
+ case PCI_DEVICE_ID_MP4M :
+ case PCIE_DEVICE_ID_MP4B :
+ sbdev->nr_ports = 4;
+
+ if(sbdev->revision == 0x91){
+ sbdev->reserved_addr[0] = pcidev->resource[0].start & PCI_BASE_ADDRESS_IO_MASK;
+ outb(0x03 , sbdev->reserved_addr[0] + 0x01);
+ outb(0x03 , sbdev->reserved_addr[0] + 0x02);
+ outb(0x01 , sbdev->reserved_addr[0] + 0x20);
+ outb(0x00 , sbdev->reserved_addr[0] + 0x21);
+ request_region(sbdev->reserved_addr[0], 32, sbdev->name);
+ sbdev->uart_access_addr = pcidev->resource[1].start & PCI_BASE_ADDRESS_IO_MASK;
+ sbdev->option_reg_addr = pcidev->resource[2].start & PCI_BASE_ADDRESS_IO_MASK;
+ }
+
+ /* SB16C1053APCI */
+ if (sbdev->revision == 0xc0)
+ {
+ int prev_port_addr = 0;
+
+ pci_read_config_dword(pcidev, PCI_BASE_ADDRESS_0, &prev_port_addr);
+ pci_remap_base(pcidev, PCI_BASE_ADDRESS_1, prev_port_addr + 8, 8);
+ pci_remap_base(pcidev, PCI_BASE_ADDRESS_2, prev_port_addr + 16, 8);
+ pci_remap_base(pcidev, PCI_BASE_ADDRESS_3, prev_port_addr + 24, 8);
+ }
+ break;
+ case PCI_DEVICE_ID_MP6 :
+ case PCI_DEVICE_ID_MP6A :
+ case PCI_DEVICE_ID_GT_MP6 :
+ case PCI_DEVICE_ID_GT_MP6A :
+ sbdev->nr_ports = 6;
+
+ /* SB16C1053APCI */
+ if (sbdev->revision == 0xc0)
+ {
+ int prev_port_addr = 0;
+
+ pci_read_config_dword(pcidev, PCI_BASE_ADDRESS_0, &prev_port_addr);
+ pci_remap_base(pcidev, PCI_BASE_ADDRESS_1, prev_port_addr + 8, 8);
+ pci_remap_base(pcidev, PCI_BASE_ADDRESS_2, prev_port_addr + 16, 16);
+ pci_remap_base(pcidev, PCI_BASE_ADDRESS_3, prev_port_addr + 32, 16);
+ }
+ break;
+ case PCI_DEVICE_ID_MP8 :
+ case PCIE_DEVICE_ID_MP8 :
+ case PCI_DEVICE_ID_GT_MP8 :
+ case PCIE_DEVICE_ID_GT_MP8 :
+ case PCIE_DEVICE_ID_MP8B :
+ sbdev->nr_ports = 8;
+ break;
+ case PCI_DEVICE_ID_MP32 :
+ case PCIE_DEVICE_ID_MP32 :
+ case PCI_DEVICE_ID_GT_MP32 :
+ case PCIE_DEVICE_ID_GT_MP32 :
+ {
+ int portnum_hex=0;
+ portnum_hex = inb(sbdev->option_reg_addr);
+ sbdev->nr_ports = ((portnum_hex/16)*10) + (portnum_hex % 16);
+ }
+ break;
+ case PCI_DEVICE_ID_MP2S1P :
+ sbdev->nr_ports = 2;
+
+ /* SB16C1053APCI */
+ if (sbdev->revision == 0xc0)
+ {
+ int prev_port_addr = 0;
+
+ pci_read_config_dword(pcidev, PCI_BASE_ADDRESS_0, &prev_port_addr);
+ pci_remap_base(pcidev, PCI_BASE_ADDRESS_1, prev_port_addr + 8, 8);
+ }
+
+ /* add PC compatible parallel port */
+ parport_pc_probe_port(pcidev->resource[2].start, pcidev->resource[3].start, PARPORT_IRQ_NONE, PARPORT_DMA_NONE, &pcidev->dev, 0);
+ break;
+ case PCI_DEVICE_ID_MP1P :
+ /* add PC compatible parallel port */
+ parport_pc_probe_port(pcidev->resource[2].start, pcidev->resource[3].start, PARPORT_IRQ_NONE, PARPORT_DMA_NONE, &pcidev->dev, 0);
+ break;
+ }
+
+ ret = request_region(sbdev->uart_access_addr, (8*sbdev->nr_ports), sbdev->name);
+
+ if (sbdev->revision == 0xc0)
+ {
+ ret = request_region(sbdev->option_reg_addr, 0x40, sbdev->name);
+ }
+ else
+ {
+ ret = request_region(sbdev->option_reg_addr, 0x20, sbdev->name);
+ }
+
+
+ NR_BOARD++;
+ NR_PORTS += sbdev->nr_ports;
+
+ /* Enable PCI interrupt */
+ addr = sbdev->option_reg_addr + MP_OPTR_IMR0;
+ for(j=0; j < (sbdev->nr_ports/8)+1; j++)
+ {
+ if (sbdev->poll_type == TYPE_INTERRUPT)
+ {
+ outb(0xff,addr +j);
+ }
+ }
+ sbdev++;
+
+ return 0;
+}
+
+static int __init multi_init(void)
+{
+ int ret, i;
+ struct pci_dev *dev = NULL;
+
+ if(fcr_count==0)
+ {
+ for(i=0;i<256;i++)
+ {
+ fcr_arr[i] = 0x01;
+
+ }
+ }
+ if(deep_count==0)
+ {
+ for(i=0;i<256;i++)
+ {
+ deep[i] = 1;
+
+ }
+ }
+ if(rtr_count==0)
+ {
+ for(i=0;i<256;i++)
+ {
+ rtr[i] = 0x10;
+ }
+ }
+ if(ttr_count==0)
+ {
+ for(i=0;i<256;i++)
+ {
+ ttr[i] = 0x38;
+ }
+ }
+
+
+printk("MULTI INIT\n");
+ for( i=0; i< mp_nrpcibrds; i++)
+ {
+
+ while( (dev = pci_get_device(mp_pciboards[i].vendor_id, mp_pciboards[i].device_id, dev) ) )
+
+ {
+printk("FOUND~~~\n");
+// Cent OS bug fix
+// if (mp_pciboards[i].device_id & 0x0800)
+ {
+ int status;
+ pci_disable_device(dev);
+ status = pci_enable_device(dev);
+
+ if (status != 0)
+ {
+ printk("Multiport Board Enable Fail !\n\n");
+ status = -ENXIO;
+ return status;
+ }
+ }
+
+ init_mp_dev(dev, mp_pciboards[i]);
+ }
+ }
+
+ for (i = 0; i < NR_IRQS; i++)
+ spin_lock_init(&irq_lists[i].lock);
+
+ ret = mp_register_driver(&multi_reg);
+
+ if (ret >= 0)
+ multi_register_ports(&multi_reg);
+
+ return ret;
+}
+
+static void __exit multi_exit(void)
+{
+ int i;
+
+ for (i = 0; i < NR_PORTS; i++)
+ mp_remove_one_port(&multi_reg, &multi_ports[i].port);
+
+ mp_unregister_driver(&multi_reg);
+}
+
+module_init(multi_init);
+module_exit(multi_exit);
+
+MODULE_DESCRIPTION("SystemBase Multiport PCI/PCIe CORE");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/sb105x/sb_pci_mp.h b/drivers/staging/sb105x/sb_pci_mp.h
new file mode 100644
index 0000000..f33efde
--- /dev/null
+++ b/drivers/staging/sb105x/sb_pci_mp.h
@@ -0,0 +1,293 @@
+#include <linux/errno.h>
+#include <linux/signal.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/serial.h>
+#include <linux/serial_reg.h>
+#include <linux/ioport.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/wait.h>
+#include <linux/tty_driver.h>
+#include <linux/pci.h>
+#include <linux/circ_buf.h>
+
+#include <asm/uaccess.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/segment.h>
+#include <asm/serial.h>
+#include <linux/interrupt.h>
+
+
+#include <linux/parport.h>
+#include <linux/ctype.h>
+#include <linux/poll.h>
+
+
+#define MP_TERMIOS ktermios
+
+#include "sb_mp_register.h"
+#include "sb_ser_core.h"
+
+#define DRIVER_VERSION "1.1"
+#define DRIVER_DATE "2012/01/05"
+#define DRIVER_AUTHOR "SYSTEMBASE<tech@sysbas.com>"
+#define DRIVER_DESC "SystemBase PCI/PCIe Multiport Core"
+
+#define SB_TTY_MP_MAJOR 54
+#define PCI_VENDOR_ID_MULTIPORT 0x14A1
+
+#define PCI_DEVICE_ID_MP1 0x4d01
+#define PCI_DEVICE_ID_MP2 0x4d02
+#define PCI_DEVICE_ID_MP4 0x4d04
+#define PCI_DEVICE_ID_MP4A 0x4d54
+#define PCI_DEVICE_ID_MP6 0x4d06
+#define PCI_DEVICE_ID_MP6A 0x4d56
+#define PCI_DEVICE_ID_MP8 0x4d08
+#define PCI_DEVICE_ID_MP32 0x4d32
+/* Parallel port */
+#define PCI_DEVICE_ID_MP1P 0x4301
+#define PCI_DEVICE_ID_MP2S1P 0x4303
+
+#define PCIE_DEVICE_ID_MP1 0x4501
+#define PCIE_DEVICE_ID_MP2 0x4502
+#define PCIE_DEVICE_ID_MP4 0x4504
+#define PCIE_DEVICE_ID_MP8 0x4508
+#define PCIE_DEVICE_ID_MP32 0x4532
+
+#define PCIE_DEVICE_ID_MP1E 0x4e01
+#define PCIE_DEVICE_ID_MP2E 0x4e02
+#define PCIE_DEVICE_ID_MP2B 0x4b02
+#define PCIE_DEVICE_ID_MP4B 0x4b04
+#define PCIE_DEVICE_ID_MP8B 0x4b08
+
+#define PCI_DEVICE_ID_GT_MP4 0x0004
+#define PCI_DEVICE_ID_GT_MP4A 0x0054
+#define PCI_DEVICE_ID_GT_MP6 0x0006
+#define PCI_DEVICE_ID_GT_MP6A 0x0056
+#define PCI_DEVICE_ID_GT_MP8 0x0008
+#define PCI_DEVICE_ID_GT_MP32 0x0032
+
+#define PCIE_DEVICE_ID_GT_MP1 0x1501
+#define PCIE_DEVICE_ID_GT_MP2 0x1502
+#define PCIE_DEVICE_ID_GT_MP4 0x1504
+#define PCIE_DEVICE_ID_GT_MP8 0x1508
+#define PCIE_DEVICE_ID_GT_MP32 0x1532
+
+#define PCI_DEVICE_ID_MP4M 0x4604 //modem
+
+#define MAX_MP_DEV 8
+#define BD_MAX_PORT 32 /* Max serial port in one board */
+#define MAX_MP_PORT 256 /* Max serial port in one PC */
+
+#define PORT_16C105XA 3
+#define PORT_16C105X 2
+#define PORT_16C55X 1
+
+#define ENABLE 1
+#define DISABLE 0
+
+/* ioctls */
+#define TIOCGNUMOFPORT 0x545F
+#define TIOCSMULTIECHO 0x5440
+#define TIOCSPTPNOECHO 0x5441
+
+#define TIOCGOPTIONREG 0x5461
+#define TIOCGDISABLEIRQ 0x5462
+#define TIOCGENABLEIRQ 0x5463
+#define TIOCGSOFTRESET 0x5464
+#define TIOCGSOFTRESETR 0x5465
+#define TIOCGREGINFO 0x5466
+#define TIOCGGETLSR 0x5467
+#define TIOCGGETDEVID 0x5468
+#define TIOCGGETBDNO 0x5469
+#define TIOCGGETINTERFACE 0x546A
+#define TIOCGGETREV 0x546B
+#define TIOCGGETNRPORTS 0x546C
+#define TIOCGGETPORTTYPE 0x546D
+#define GETDEEPFIFO 0x54AA
+#define SETDEEPFIFO 0x54AB
+#define SETFCR 0x54BA
+#define SETTTR 0x54B1
+#define SETRTR 0x54B2
+#define GETTTR 0x54B3
+#define GETRTR 0x54B4
+
+/* multi-drop mode related ioctl commands */
+#define TIOCSMULTIDROP 0x5470
+#define TIOCSMDADDR 0x5471
+#define TIOCGMDADDR 0x5472
+#define TIOCSENDADDR 0x5473
+
+
+/* serial interface */
+#define RS232 1
+#define RS422PTP 2
+#define RS422MD 3
+#define RS485NE 4
+#define RS485ECHO 5
+
+#define serial_inp(up, offset) serial_in(up, offset)
+#define serial_outp(up, offset, value) serial_out(up, offset, value)
+
+#define PASS_LIMIT 256
+#define is_real_interrupt(irq) ((irq) != 0)
+
+#define PROBE_ANY (~0)
+
+static DEFINE_MUTEX(mp_mutex);
+#define MP_MUTEX_LOCK(x) mutex_lock(&(x))
+#define MP_MUTEX_UNLOCK(x) mutex_unlock(&(x))
+#define MP_STATE_LOCK(x) mutex_lock(&((x)->mutex))
+#define MP_STATE_UNLOCK(x) mutex_unlock(&((x)->mutex))
+
+
+#define UART_LSR_SPECIAL 0x1E
+
+#define HIGH_BITS_OFFSET ((sizeof(long)-sizeof(int))*8)
+#define uart_users(state) ((state)->count + ((state)->info ? (state)->info->blocked_open : 0))
+
+
+//#define MP_DEBUG 1
+#undef MP_DEBUG
+
+#ifdef MP_DEBUG
+#define DPRINTK(x...) printk(x)
+#else
+#define DPRINTK(x...) do { } while (0)
+#endif
+
+#ifdef MP_DEBUG
+#define DEBUG_AUTOCONF(fmt...) printk(fmt)
+#else
+#define DEBUG_AUTOCONF(fmt...) do { } while (0)
+#endif
+
+#ifdef MP_DEBUG
+#define DEBUG_INTR(fmt...) printk(fmt)
+#else
+#define DEBUG_INTR(fmt...) do { } while (0)
+#endif
+
+#if defined(__i386__) && (defined(CONFIG_M386) || defined(CONFIG_M486))
+#define SERIAL_INLINE
+#endif
+#ifdef SERIAL_INLINE
+#define _INLINE_ inline
+#else
+#define _INLINE_
+#endif
+
+#define TYPE_POLL 1
+#define TYPE_INTERRUPT 2
+
+
+struct mp_device_t {
+ unsigned short device_id;
+ unsigned char revision;
+ char *name;
+ unsigned long uart_access_addr;
+ unsigned long option_reg_addr;
+ unsigned long reserved_addr[4];
+ int irq;
+ int nr_ports;
+ int poll_type;
+};
+
+typedef struct mppcibrd {
+ char *name;
+ unsigned short vendor_id;
+ unsigned short device_id;
+} mppcibrd_t;
+
+static mppcibrd_t mp_pciboards[] = {
+
+ { "Multi-1 PCI", PCI_VENDOR_ID_MULTIPORT , PCI_DEVICE_ID_MP1} ,
+ { "Multi-2 PCI", PCI_VENDOR_ID_MULTIPORT , PCI_DEVICE_ID_MP2} ,
+ { "Multi-4 PCI", PCI_VENDOR_ID_MULTIPORT , PCI_DEVICE_ID_MP4} ,
+ { "Multi-4 PCI", PCI_VENDOR_ID_MULTIPORT , PCI_DEVICE_ID_MP4A} ,
+ { "Multi-6 PCI", PCI_VENDOR_ID_MULTIPORT , PCI_DEVICE_ID_MP6} ,
+ { "Multi-6 PCI", PCI_VENDOR_ID_MULTIPORT , PCI_DEVICE_ID_MP6A} ,
+ { "Multi-8 PCI", PCI_VENDOR_ID_MULTIPORT , PCI_DEVICE_ID_MP8} ,
+ { "Multi-32 PCI", PCI_VENDOR_ID_MULTIPORT , PCI_DEVICE_ID_MP32} ,
+
+ { "Multi-1P PCI", PCI_VENDOR_ID_MULTIPORT , PCI_DEVICE_ID_MP1P} ,
+ { "Multi-2S1P PCI", PCI_VENDOR_ID_MULTIPORT , PCI_DEVICE_ID_MP2S1P} ,
+
+ { "Multi-4(GT) PCI", PCI_VENDOR_ID_MULTIPORT , PCI_DEVICE_ID_GT_MP4} ,
+ { "Multi-4(GT) PCI", PCI_VENDOR_ID_MULTIPORT , PCI_DEVICE_ID_GT_MP4A} ,
+ { "Multi-6(GT) PCI", PCI_VENDOR_ID_MULTIPORT , PCI_DEVICE_ID_GT_MP6} ,
+ { "Multi-6(GT) PCI", PCI_VENDOR_ID_MULTIPORT , PCI_DEVICE_ID_GT_MP6A} ,
+ { "Multi-8(GT) PCI", PCI_VENDOR_ID_MULTIPORT , PCI_DEVICE_ID_GT_MP8} ,
+ { "Multi-32(GT) PCI", PCI_VENDOR_ID_MULTIPORT , PCI_DEVICE_ID_GT_MP32} ,
+
+ { "Multi-1 PCIe", PCI_VENDOR_ID_MULTIPORT , PCIE_DEVICE_ID_MP1} ,
+ { "Multi-2 PCIe", PCI_VENDOR_ID_MULTIPORT , PCIE_DEVICE_ID_MP2} ,
+ { "Multi-4 PCIe", PCI_VENDOR_ID_MULTIPORT , PCIE_DEVICE_ID_MP4} ,
+ { "Multi-8 PCIe", PCI_VENDOR_ID_MULTIPORT , PCIE_DEVICE_ID_MP8} ,
+ { "Multi-32 PCIe", PCI_VENDOR_ID_MULTIPORT , PCIE_DEVICE_ID_MP32} ,
+
+ { "Multi-1 PCIe E", PCI_VENDOR_ID_MULTIPORT , PCIE_DEVICE_ID_MP1E} ,
+ { "Multi-2 PCIe E", PCI_VENDOR_ID_MULTIPORT , PCIE_DEVICE_ID_MP2E} ,
+ { "Multi-2 PCIe B", PCI_VENDOR_ID_MULTIPORT , PCIE_DEVICE_ID_MP2B} ,
+ { "Multi-4 PCIe B", PCI_VENDOR_ID_MULTIPORT , PCIE_DEVICE_ID_MP4B} ,
+ { "Multi-8 PCIe B", PCI_VENDOR_ID_MULTIPORT , PCIE_DEVICE_ID_MP8B} ,
+
+ { "Multi-1(GT) PCIe", PCI_VENDOR_ID_MULTIPORT , PCIE_DEVICE_ID_GT_MP1} ,
+ { "Multi-2(GT) PCIe", PCI_VENDOR_ID_MULTIPORT , PCIE_DEVICE_ID_GT_MP2} ,
+ { "Multi-4(GT) PCIe", PCI_VENDOR_ID_MULTIPORT , PCIE_DEVICE_ID_GT_MP4} ,
+ { "Multi-8(GT) PCIe", PCI_VENDOR_ID_MULTIPORT , PCIE_DEVICE_ID_GT_MP8} ,
+ { "Multi-32(GT) PCIe", PCI_VENDOR_ID_MULTIPORT , PCIE_DEVICE_ID_GT_MP32} ,
+
+ { "Multi-4M PCI", PCI_VENDOR_ID_MULTIPORT , PCI_DEVICE_ID_MP4M} ,
+};
+
+struct mp_port {
+ struct sb_uart_port port;
+
+ struct timer_list timer; /* "no irq" timer */
+ struct list_head list; /* ports on this IRQ */
+ unsigned int capabilities; /* port capabilities */
+ unsigned short rev;
+ unsigned char acr;
+ unsigned char ier;
+ unsigned char lcr;
+ unsigned char mcr;
+ unsigned char mcr_mask; /* mask of user bits */
+ unsigned char mcr_force; /* mask of forced bits */
+ unsigned char lsr_break_flag;
+
+ void (*pm)(struct sb_uart_port *port,
+ unsigned int state, unsigned int old);
+ struct mp_device_t *device;
+ unsigned long interface_config_addr;
+ unsigned long option_base_addr;
+ unsigned char interface;
+ unsigned char poll_type;
+};
+
+struct irq_info {
+ spinlock_t lock;
+ struct list_head *head;
+};
+
+struct sb105x_uart_config {
+ char *name;
+ int dfl_xmit_fifo_size;
+ int flags;
+};
+
+static const struct sb105x_uart_config uart_config[] = {
+ { "unknown", 1, 0 },
+ { "16550A", 16, UART_CLEAR_FIFO | UART_USE_FIFO },
+ { "SB16C1050", 128, UART_CLEAR_FIFO | UART_USE_FIFO | UART_STARTECH },
+ { "SB16C1050A", 128, UART_CLEAR_FIFO | UART_USE_FIFO | UART_STARTECH },
+};
+
+
+
diff --git a/drivers/staging/sb105x/sb_ser_core.h b/drivers/staging/sb105x/sb_ser_core.h
new file mode 100644
index 0000000..c8fb991
--- /dev/null
+++ b/drivers/staging/sb105x/sb_ser_core.h
@@ -0,0 +1,368 @@
+#include <linux/wait.h>
+
+#define UART_CONFIG_TYPE (1 << 0)
+#define UART_CONFIG_IRQ (1 << 1)
+#define UPIO_PORT (0)
+#define UPIO_HUB6 (1)
+#define UPIO_MEM (2)
+#define UPIO_MEM32 (3)
+#define UPIO_AU (4) /* Au1x00 type IO */
+#define UPIO_TSI (5) /* Tsi108/109 type IO */
+#define UPF_FOURPORT (1 << 1)
+#define UPF_SAK (1 << 2)
+#define UPF_SPD_MASK (0x1030)
+#define UPF_SPD_HI (0x0010)
+#define UPF_SPD_VHI (0x0020)
+#define UPF_SPD_CUST (0x0030)
+#define UPF_SPD_SHI (0x1000)
+#define UPF_SPD_WARP (0x1010)
+#define UPF_SKIP_TEST (1 << 6)
+#define UPF_AUTO_IRQ (1 << 7)
+#define UPF_HARDPPS_CD (1 << 11)
+#define UPF_LOW_LATENCY (1 << 13)
+#define UPF_BUGGY_UART (1 << 14)
+#define UPF_MAGIC_MULTIPLIER (1 << 16)
+#define UPF_CONS_FLOW (1 << 23)
+#define UPF_SHARE_IRQ (1 << 24)
+#define UPF_BOOT_AUTOCONF (1 << 28)
+#define UPF_DEAD (1 << 30)
+#define UPF_IOREMAP (1 << 31)
+#define UPF_CHANGE_MASK (0x17fff)
+#define UPF_USR_MASK (UPF_SPD_MASK|UPF_LOW_LATENCY)
+#define USF_CLOSING_WAIT_INF (0)
+#define USF_CLOSING_WAIT_NONE (~0U)
+
+#define UART_XMIT_SIZE PAGE_SIZE
+
+#define UIF_CHECK_CD (1 << 25)
+#define UIF_CTS_FLOW (1 << 26)
+#define UIF_NORMAL_ACTIVE (1 << 29)
+#define UIF_INITIALIZED (1 << 31)
+#define UIF_SUSPENDED (1 << 30)
+
+#define WAKEUP_CHARS 256
+
+#define uart_circ_empty(circ) ((circ)->head == (circ)->tail)
+#define uart_circ_clear(circ) ((circ)->head = (circ)->tail = 0)
+
+#define uart_circ_chars_pending(circ) \
+ (CIRC_CNT((circ)->head, (circ)->tail, UART_XMIT_SIZE))
+
+#define uart_circ_chars_free(circ) \
+ (CIRC_SPACE((circ)->head, (circ)->tail, UART_XMIT_SIZE))
+
+#define uart_tx_stopped(port) \
+ ((port)->info->tty->stopped || (port)->info->tty->hw_stopped)
+
+#define UART_ENABLE_MS(port,cflag) ((port)->flags & UPF_HARDPPS_CD || \
+ (cflag) & CRTSCTS || \
+ !((cflag) & CLOCAL))
+
+
+struct sb_uart_port;
+struct sb_uart_info;
+struct serial_struct;
+struct device;
+
+struct sb_uart_ops {
+ unsigned int (*tx_empty)(struct sb_uart_port *);
+ void (*set_mctrl)(struct sb_uart_port *, unsigned int mctrl);
+ unsigned int (*get_mctrl)(struct sb_uart_port *);
+ void (*stop_tx)(struct sb_uart_port *);
+ void (*start_tx)(struct sb_uart_port *);
+ void (*send_xchar)(struct sb_uart_port *, char ch);
+ void (*stop_rx)(struct sb_uart_port *);
+ void (*enable_ms)(struct sb_uart_port *);
+ void (*break_ctl)(struct sb_uart_port *, int ctl);
+ int (*startup)(struct sb_uart_port *);
+ void (*shutdown)(struct sb_uart_port *);
+ void (*set_termios)(struct sb_uart_port *, struct MP_TERMIOS *new,
+ struct MP_TERMIOS *old);
+ void (*pm)(struct sb_uart_port *, unsigned int state,
+ unsigned int oldstate);
+ int (*set_wake)(struct sb_uart_port *, unsigned int state);
+
+ const char *(*type)(struct sb_uart_port *);
+
+ void (*release_port)(struct sb_uart_port *);
+
+ int (*request_port)(struct sb_uart_port *);
+ void (*config_port)(struct sb_uart_port *, int);
+ int (*verify_port)(struct sb_uart_port *, struct serial_struct *);
+ int (*ioctl)(struct sb_uart_port *, unsigned int, unsigned long);
+};
+
+
+struct sb_uart_icount {
+ __u32 cts;
+ __u32 dsr;
+ __u32 rng;
+ __u32 dcd;
+ __u32 rx;
+ __u32 tx;
+ __u32 frame;
+ __u32 overrun;
+ __u32 parity;
+ __u32 brk;
+ __u32 buf_overrun;
+};
+typedef unsigned int upf_t;
+
+struct sb_uart_port {
+ spinlock_t lock; /* port lock */
+ unsigned int iobase; /* in/out[bwl] */
+ unsigned char __iomem *membase; /* read/write[bwl] */
+ unsigned int irq; /* irq number */
+ unsigned int uartclk; /* base uart clock */
+ unsigned int fifosize; /* tx fifo size */
+ unsigned char x_char; /* xon/xoff char */
+ unsigned char regshift; /* reg offset shift */
+ unsigned char iotype; /* io access style */
+ unsigned char unused1;
+
+
+ unsigned int read_status_mask; /* driver specific */
+ unsigned int ignore_status_mask; /* driver specific */
+ struct sb_uart_info *info; /* pointer to parent info */
+ struct sb_uart_icount icount; /* statistics */
+
+ struct console *cons; /* struct console, if any */
+#ifdef CONFIG_SERIAL_CORE_CONSOLE
+ unsigned long sysrq; /* sysrq timeout */
+#endif
+
+ upf_t flags;
+
+ unsigned int mctrl; /* current modem ctrl settings */
+ unsigned int timeout; /* character-based timeout */
+ unsigned int type; /* port type */
+ const struct sb_uart_ops *ops;
+ unsigned int custom_divisor;
+ unsigned int line; /* port index */
+ unsigned long mapbase; /* for ioremap */
+ struct device *dev; /* parent device */
+ unsigned char hub6; /* this should be in the 8250 driver */
+ unsigned char unused[3];
+};
+
+#define mdmode unused[2]
+#define MDMODE_ADDR 0x1
+#define MDMODE_ENABLE 0x2
+#define MDMODE_AUTO 0x4
+#define MDMODE_ADDRSEND 0x8
+
+struct sb_uart_state {
+ unsigned int close_delay; /* msec */
+ unsigned int closing_wait; /* msec */
+
+
+ int count;
+ int pm_state;
+ struct sb_uart_info *info;
+ struct sb_uart_port *port;
+
+ struct mutex mutex;
+};
+
+typedef unsigned int uif_t;
+
+struct sb_uart_info {
+ struct tty_struct *tty;
+ struct circ_buf xmit;
+ uif_t flags;
+
+ int blocked_open;
+
+ struct tasklet_struct tlet;
+
+ wait_queue_head_t open_wait;
+ wait_queue_head_t delta_msr_wait;
+};
+
+
+struct module;
+struct tty_driver;
+
+struct uart_driver {
+ struct module *owner;
+ const char *driver_name;
+ const char *dev_name;
+ int major;
+ int minor;
+ int nr;
+ struct console *cons;
+
+ struct sb_uart_state *state;
+ struct tty_driver *tty_driver;
+};
+
+void sb_uart_write_wakeup(struct sb_uart_port *port)
+{
+ struct sb_uart_info *info = port->info;
+ tasklet_schedule(&info->tlet);
+}
+
+void sb_uart_update_timeout(struct sb_uart_port *port, unsigned int cflag,
+ unsigned int baud)
+{
+ unsigned int bits;
+
+ switch (cflag & CSIZE)
+ {
+ case CS5:
+ bits = 7;
+ break;
+
+ case CS6:
+ bits = 8;
+ break;
+
+ case CS7:
+ bits = 9;
+ break;
+
+ default:
+ bits = 10;
+ break;
+ }
+
+ if (cflag & CSTOPB)
+ {
+ bits++;
+ }
+
+ if (cflag & PARENB)
+ {
+ bits++;
+ }
+
+ bits = bits * port->fifosize;
+
+ port->timeout = (HZ * bits) / baud + HZ/50;
+}
+unsigned int sb_uart_get_baud_rate(struct sb_uart_port *port, struct MP_TERMIOS *termios,
+ struct MP_TERMIOS *old, unsigned int min,
+ unsigned int max)
+{
+ unsigned int try, baud, altbaud = 38400;
+ upf_t flags = port->flags & UPF_SPD_MASK;
+
+ if (flags == UPF_SPD_HI)
+ altbaud = 57600;
+ if (flags == UPF_SPD_VHI)
+ altbaud = 115200;
+ if (flags == UPF_SPD_SHI)
+ altbaud = 230400;
+ if (flags == UPF_SPD_WARP)
+ altbaud = 460800;
+
+ for (try = 0; try < 2; try++) {
+
+ switch (termios->c_cflag & (CBAUD | CBAUDEX))
+ {
+ case B921600 : baud = 921600; break;
+ case B460800 : baud = 460800; break;
+ case B230400 : baud = 230400; break;
+ case B115200 : baud = 115200; break;
+ case B57600 : baud = 57600; break;
+ case B38400 : baud = 38400; break;
+ case B19200 : baud = 19200; break;
+ case B9600 : baud = 9600; break;
+ case B4800 : baud = 4800; break;
+ case B2400 : baud = 2400; break;
+ case B1800 : baud = 1800; break;
+ case B1200 : baud = 1200; break;
+ case B600 : baud = 600; break;
+ case B300 : baud = 300; break;
+ case B200 : baud = 200; break;
+ case B150 : baud = 150; break;
+ case B134 : baud = 134; break;
+ case B110 : baud = 110; break;
+ case B75 : baud = 75; break;
+ case B50 : baud = 50; break;
+ default : baud = 9600; break;
+ }
+
+ if (baud == 38400)
+ baud = altbaud;
+
+ if (baud == 0)
+ baud = 9600;
+
+ if (baud >= min && baud <= max)
+ return baud;
+
+ termios->c_cflag &= ~CBAUD;
+ if (old) {
+ termios->c_cflag |= old->c_cflag & CBAUD;
+ old = NULL;
+ continue;
+ }
+
+ termios->c_cflag |= B9600;
+ }
+
+ return 0;
+}
+unsigned int sb_uart_get_divisor(struct sb_uart_port *port, unsigned int baud)
+{
+ unsigned int quot;
+
+ if (baud == 38400 && (port->flags & UPF_SPD_MASK) == UPF_SPD_CUST)
+ quot = port->custom_divisor;
+ else
+ quot = (port->uartclk + (8 * baud)) / (16 * baud);
+
+ return quot;
+}
+
+
+
+static inline int sb_uart_handle_break(struct sb_uart_port *port)
+{
+ struct sb_uart_info *info = port->info;
+
+ if (port->flags & UPF_SAK)
+ do_SAK(info->tty);
+ return 0;
+}
+
+static inline void sb_uart_handle_dcd_change(struct sb_uart_port *port, unsigned int status)
+{
+ struct sb_uart_info *info = port->info;
+
+ port->icount.dcd++;
+
+ if (info->flags & UIF_CHECK_CD) {
+ if (status)
+ wake_up_interruptible(&info->open_wait);
+ else if (info->tty)
+ tty_hangup(info->tty);
+ }
+}
+
+static inline void sb_uart_handle_cts_change(struct sb_uart_port *port, unsigned int status)
+{
+ struct sb_uart_info *info = port->info;
+ struct tty_struct *tty = info->tty;
+
+ port->icount.cts++;
+
+ if (info->flags & UIF_CTS_FLOW) {
+ if (tty->hw_stopped) {
+ if (status) {
+ tty->hw_stopped = 0;
+ port->ops->start_tx(port);
+ sb_uart_write_wakeup(port);
+ }
+ } else {
+ if (!status) {
+ tty->hw_stopped = 1;
+ port->ops->stop_tx(port);
+ }
+ }
+ }
+}
+
+
+
diff --git a/drivers/staging/sbe-2t3e3/cpld.c b/drivers/staging/sbe-2t3e3/cpld.c
index cc2b54d..27365f9 100644
--- a/drivers/staging/sbe-2t3e3/cpld.c
+++ b/drivers/staging/sbe-2t3e3/cpld.c
@@ -338,7 +338,7 @@
SBE_2T3E3_CPLD_VAL_FRACTIONAL_MODE_2);
break;
default:
- printk(KERN_ERR "wrong mode in set_fractional_mode\n");
+ netdev_err(sc->dev, "wrong mode in set_fractional_mode\n");
return;
}
diff --git a/drivers/staging/sbe-2t3e3/main.c b/drivers/staging/sbe-2t3e3/main.c
index f3dbef6..c8e0398 100644
--- a/drivers/staging/sbe-2t3e3/main.c
+++ b/drivers/staging/sbe-2t3e3/main.c
@@ -135,9 +135,10 @@
for (i = 0; i < 3; i++)
sc->ether.card_serial_number[i] = t3e3_eeprom_read_word(sc, 10 + i);
- printk(KERN_INFO "SBE wanPMC-2T3E3 serial number: %04X%04X%04X\n",
- sc->ether.card_serial_number[0], sc->ether.card_serial_number[1],
- sc->ether.card_serial_number[2]);
+ netdev_info(sc->dev, "SBE wanPMC-2T3E3 serial number: %04X%04X%04X\n",
+ sc->ether.card_serial_number[0],
+ sc->ether.card_serial_number[1],
+ sc->ether.card_serial_number[2]);
}
/*
diff --git a/drivers/staging/sbe-2t3e3/module.c b/drivers/staging/sbe-2t3e3/module.c
index 8adb178..ae7af39 100644
--- a/drivers/staging/sbe-2t3e3/module.c
+++ b/drivers/staging/sbe-2t3e3/module.c
@@ -10,6 +10,8 @@
* This code is based on a driver written by SBE Inc.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/delay.h>
@@ -50,7 +52,7 @@
pci_set_drvdata(pdev, NULL);
}
-static int __devinit t3e3_init_channel(struct channel *channel, struct pci_dev *pdev, struct card *card)
+static int t3e3_init_channel(struct channel *channel, struct pci_dev *pdev, struct card *card)
{
struct net_device *dev;
unsigned int val;
@@ -66,7 +68,7 @@
dev = alloc_hdlcdev(channel);
if (!dev) {
- printk(KERN_ERR "SBE 2T3E3" ": Out of memory\n");
+ pr_err("Out of memory\n");
err = -ENOMEM;
goto free_regions;
}
@@ -96,7 +98,8 @@
err = request_irq(dev->irq, &t3e3_intr, IRQF_SHARED, dev->name, dev);
if (err) {
- printk(KERN_WARNING "%s: could not get irq: %d\n", dev->name, dev->irq);
+ netdev_warn(channel->dev, "%s: could not get irq: %d\n",
+ dev->name, dev->irq);
goto unregister_dev;
}
@@ -114,7 +117,7 @@
return err;
}
-static void __devexit t3e3_remove_card(struct pci_dev *pdev)
+static void t3e3_remove_card(struct pci_dev *pdev)
{
struct channel *channel0 = pci_get_drvdata(pdev);
struct card *card = channel0->card;
@@ -128,7 +131,7 @@
kfree(card);
}
-static int __devinit t3e3_init_card(struct pci_dev *pdev, const struct pci_device_id *ent)
+static int t3e3_init_card(struct pci_dev *pdev, const struct pci_device_id *ent)
{
/* pdev points to channel #0 */
struct pci_dev *pdev1 = NULL;
@@ -144,7 +147,7 @@
break; /* found the second channel */
if (!pdev1) {
- printk(KERN_ERR "SBE 2T3E3" ": Can't find the second channel\n");
+ dev_err(&pdev->dev, "Can't find the second channel\n");
return -EFAULT;
}
channels = 2;
@@ -153,7 +156,7 @@
card = kzalloc(sizeof(struct card) + channels * sizeof(struct channel), GFP_KERNEL);
if (!card) {
- printk(KERN_ERR "SBE 2T3E3" ": Out of memory\n");
+ dev_err(&pdev->dev, "Out of memory\n");
return -ENOBUFS;
}
@@ -185,7 +188,7 @@
return err;
}
-static struct pci_device_id t3e3_pci_tbl[] __devinitdata = {
+static struct pci_device_id t3e3_pci_tbl[] = {
{ PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_21142,
PCI_VENDOR_ID_SBE, PCI_SUBDEVICE_ID_SBE_T3E3, 0, 0, 0 },
{ PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_21142,
diff --git a/drivers/staging/sbe-2t3e3/netdev.c b/drivers/staging/sbe-2t3e3/netdev.c
index 180c963..1f5088b 100644
--- a/drivers/staging/sbe-2t3e3/netdev.c
+++ b/drivers/staging/sbe-2t3e3/netdev.c
@@ -57,7 +57,7 @@
return 0;
}
-static struct net_device_stats* t3e3_get_stats(struct net_device *dev)
+static struct net_device_stats *t3e3_get_stats(struct net_device *dev)
{
struct net_device_stats *nstats = &dev->stats;
struct channel *sc = dev_to_priv(dev);
@@ -134,7 +134,8 @@
dev->tx_queue_len = 100;
hdlc->xmit = t3e3_if_start_xmit;
hdlc->attach = t3e3_attach;
- if ((retval = register_hdlc_device(dev))) {
+ retval = register_hdlc_device(dev);
+ if (retval) {
dev_err(&sc->pdev->dev, "error registering HDLC device\n");
return retval;
}
diff --git a/drivers/staging/sep/sep_main.c b/drivers/staging/sep/sep_main.c
index a414e52..15c6e3d 100644
--- a/drivers/staging/sep/sep_main.c
+++ b/drivers/staging/sep/sep_main.c
@@ -3431,7 +3431,7 @@
if (copy_from_user(dcb_args,
user_dcb_args,
num_dcbs * sizeof(struct build_dcb_struct))) {
- error = -EINVAL;
+ error = -EFAULT;
goto end_function;
}
@@ -3619,7 +3619,7 @@
/* Copy input data to write() to allocated message buffer */
if (copy_from_user(*msg_region, msg_user, msg_len)) {
- error = -EINVAL;
+ error = -EFAULT;
goto end_function;
}
@@ -4112,7 +4112,7 @@
*Attempt to set up and configure a SEP device that has been
*discovered by the PCI layer. Allocates all required resources.
*/
-static int __devinit sep_probe(struct pci_dev *pdev,
+static int sep_probe(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
int error = 0;
diff --git a/drivers/staging/serqt_usb2/serqt_usb2.c b/drivers/staging/serqt_usb2/serqt_usb2.c
index 099bc69..1b3e995 100644
--- a/drivers/staging/serqt_usb2/serqt_usb2.c
+++ b/drivers/staging/serqt_usb2/serqt_usb2.c
@@ -272,7 +272,8 @@
status = urb->status;
if (status) {
- dev_dbg(&urb->dev->dev, "nonzero write bulk status received:%d\n", status);
+ dev_dbg(&urb->dev->dev,
+ "nonzero write bulk status received:%d\n", status);
return;
}
@@ -290,22 +291,80 @@
/* FIXME */
}
+static void qt_status_change_check(struct tty_struct *tty,
+ struct urb *urb,
+ struct quatech_port *qt_port,
+ struct usb_serial_port *port)
+{
+ int flag, i;
+ unsigned char *data = urb->transfer_buffer;
+ unsigned int RxCount = urb->actual_length;
+
+ for (i = 0; i < RxCount; ++i) {
+ /* Look ahead code here */
+ if ((i <= (RxCount - 3)) && (data[i] == 0x1b)
+ && (data[i + 1] == 0x1b)) {
+ flag = 0;
+ switch (data[i + 2]) {
+ case 0x00:
+ if (i > (RxCount - 4)) {
+ dev_dbg(&port->dev,
+ "Illegal escape seuences in received data\n");
+ break;
+ }
+
+ ProcessLineStatus(qt_port, data[i + 3]);
+
+ i += 3;
+ flag = 1;
+ break;
+
+ case 0x01:
+ if (i > (RxCount - 4)) {
+ dev_dbg(&port->dev,
+ "Illegal escape seuences in received data\n");
+ break;
+ }
+
+ ProcessModemStatus(qt_port, data[i + 3]);
+
+ i += 3;
+ flag = 1;
+ break;
+
+ case 0xff:
+ dev_dbg(&port->dev, "No status sequence.\n");
+
+ ProcessRxChar(tty, port, data[i]);
+ ProcessRxChar(tty, port, data[i + 1]);
+
+ i += 2;
+ break;
+ }
+ if (flag == 1)
+ continue;
+ }
+
+ if (tty && urb->actual_length)
+ tty_insert_flip_char(tty, data[i], TTY_NORMAL);
+
+ }
+ tty_flip_buffer_push(tty);
+}
+
static void qt_read_bulk_callback(struct urb *urb)
{
struct usb_serial_port *port = urb->context;
struct usb_serial *serial = get_usb_serial(port, __func__);
struct quatech_port *qt_port = qt_get_port_private(port);
- unsigned char *data;
struct tty_struct *tty;
- unsigned int index;
- unsigned int RxCount;
- int i, result;
- int flag, flag_data;
+ int result;
if (urb->status) {
qt_port->ReadBulkStopped = 1;
- dev_dbg(&urb->dev->dev, "%s - nonzero write bulk status received: %d\n",
+ dev_dbg(&urb->dev->dev,
+ "%s - nonzero write bulk status received: %d\n",
__func__, urb->status);
return;
}
@@ -314,14 +373,8 @@
if (!tty)
return;
- data = urb->transfer_buffer;
-
- RxCount = urb->actual_length;
-
- /* index = MINOR(port->tty->device) - serial->minor; */
- index = tty->index - serial->minor;
-
- dev_dbg(&port->dev, "%s - port->RxHolding = %d\n", __func__, qt_port->RxHolding);
+ dev_dbg(&port->dev,
+ "%s - port->RxHolding = %d\n", __func__, qt_port->RxHolding);
if (port_paranoia_check(port, __func__) != 0) {
qt_port->ReadBulkStopped = 1;
@@ -333,7 +386,8 @@
if (qt_port->closePending == 1) {
/* Were closing , stop reading */
- dev_dbg(&port->dev, "%s - (qt_port->closepending == 1\n", __func__);
+ dev_dbg(&port->dev,
+ "%s - (qt_port->closepending == 1\n", __func__);
qt_port->ReadBulkStopped = 1;
goto exit;
}
@@ -351,62 +405,14 @@
if (urb->status) {
qt_port->ReadBulkStopped = 1;
- dev_dbg(&port->dev, "%s - nonzero read bulk status received: %d\n",
+ dev_dbg(&port->dev,
+ "%s - nonzero read bulk status received: %d\n",
__func__, urb->status);
goto exit;
}
- if (RxCount) {
- flag_data = 0;
- for (i = 0; i < RxCount; ++i) {
- /* Look ahead code here */
- if ((i <= (RxCount - 3)) && (data[i] == 0x1b)
- && (data[i + 1] == 0x1b)) {
- flag = 0;
- switch (data[i + 2]) {
- case 0x00:
- /* line status change 4th byte must follow */
- if (i > (RxCount - 4)) {
- dev_dbg(&port->dev, "Illegal escape seuences in received data\n");
- break;
- }
- ProcessLineStatus(qt_port, data[i + 3]);
- i += 3;
- flag = 1;
- break;
-
- case 0x01:
- /* Modem status status change 4th byte must follow */
- dev_dbg(&port->dev, "Modem status status.\n");
- if (i > (RxCount - 4)) {
- dev_dbg(&port->dev, "Illegal escape sequences in received data\n");
- break;
- }
- ProcessModemStatus(qt_port,
- data[i + 3]);
- i += 3;
- flag = 1;
- break;
- case 0xff:
- dev_dbg(&port->dev, "No status sequence.\n");
-
- if (tty) {
- ProcessRxChar(tty, port, data[i]);
- ProcessRxChar(tty, port, data[i + 1]);
- }
- i += 2;
- break;
- }
- if (flag == 1)
- continue;
- }
-
- if (tty && urb->actual_length)
- tty_insert_flip_char(tty, data[i], TTY_NORMAL);
-
- }
- tty_flip_buffer_push(tty);
- }
+ if (urb->actual_length)
+ qt_status_change_check(tty, urb, qt_port, port);
/* Continue trying to always read */
usb_fill_bulk_urb(port->read_urb, serial->dev,
@@ -417,10 +423,11 @@
qt_read_bulk_callback, port);
result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
if (result)
- dev_dbg(&port->dev, "%s - failed resubmitting read urb, error %d",
+ dev_dbg(&port->dev,
+ "%s - failed resubmitting read urb, error %d",
__func__, result);
else {
- if (RxCount) {
+ if (urb->actual_length) {
tty_flip_buffer_push(tty);
tty_schedule_flip(tty);
}
@@ -824,6 +831,31 @@
}
+static void qt_submit_urb_from_open(struct usb_serial *serial,
+ struct usb_serial_port *port)
+{
+ int result;
+ struct usb_serial_port *port0 = serial->port[0];
+
+ /* set up interrupt urb */
+ usb_fill_int_urb(port0->interrupt_in_urb,
+ serial->dev,
+ usb_rcvintpipe(serial->dev,
+ port0->interrupt_in_endpointAddress),
+ port0->interrupt_in_buffer,
+ port0->interrupt_in_urb->transfer_buffer_length,
+ qt_interrupt_callback, serial,
+ port0->interrupt_in_urb->interval);
+
+ result = usb_submit_urb(port0->interrupt_in_urb,
+ GFP_KERNEL);
+ if (result) {
+ dev_err(&port->dev,
+ "%s - Error %d submitting interrupt urb\n",
+ __func__, result);
+ }
+}
+
static int qt_open(struct tty_struct *tty,
struct usb_serial_port *port)
{
@@ -884,38 +916,20 @@
/* Check to see if we've set up our endpoint info yet */
if (port0->open_ports == 1) {
- if (serial->port[0]->interrupt_in_buffer == NULL) {
- /* set up interrupt urb */
- usb_fill_int_urb(serial->port[0]->interrupt_in_urb,
- serial->dev,
- usb_rcvintpipe(serial->dev,
- serial->port[0]->interrupt_in_endpointAddress),
- serial->port[0]->interrupt_in_buffer,
- serial->port[0]->
- interrupt_in_urb->transfer_buffer_length,
- qt_interrupt_callback, serial,
- serial->port[0]->
- interrupt_in_urb->interval);
-
- result =
- usb_submit_urb(serial->port[0]->interrupt_in_urb,
- GFP_KERNEL);
- if (result) {
- dev_err(&port->dev,
- "%s - Error %d submitting "
- "interrupt urb\n", __func__, result);
- }
-
- }
-
+ if (serial->port[0]->interrupt_in_buffer == NULL)
+ qt_submit_urb_from_open(serial, port);
}
dev_dbg(&port->dev, "port number is %d\n", port->number);
dev_dbg(&port->dev, "serial number is %d\n", port->serial->minor);
- dev_dbg(&port->dev, "Bulkin endpoint is %d\n", port->bulk_in_endpointAddress);
- dev_dbg(&port->dev, "BulkOut endpoint is %d\n", port->bulk_out_endpointAddress);
- dev_dbg(&port->dev, "Interrupt endpoint is %d\n", port->interrupt_in_endpointAddress);
- dev_dbg(&port->dev, "port's number in the device is %d\n", quatech_port->port_num);
+ dev_dbg(&port->dev,
+ "Bulkin endpoint is %d\n", port->bulk_in_endpointAddress);
+ dev_dbg(&port->dev,
+ "BulkOut endpoint is %d\n", port->bulk_out_endpointAddress);
+ dev_dbg(&port->dev, "Interrupt endpoint is %d\n",
+ port->interrupt_in_endpointAddress);
+ dev_dbg(&port->dev, "port's number in the device is %d\n",
+ quatech_port->port_num);
quatech_port->read_urb = port->read_urb;
/* set up our bulk in urb */
@@ -928,7 +942,8 @@
quatech_port->read_urb->transfer_buffer_length,
qt_read_bulk_callback, quatech_port);
- dev_dbg(&port->dev, "qt_open: bulkin endpoint is %d\n", port->bulk_in_endpointAddress);
+ dev_dbg(&port->dev, "qt_open: bulkin endpoint is %d\n",
+ port->bulk_in_endpointAddress);
quatech_port->read_urb_busy = true;
result = usb_submit_urb(quatech_port->read_urb, GFP_KERNEL);
if (result) {
@@ -1021,15 +1036,18 @@
/* Close uart channel */
status = qt_close_channel(serial, index);
if (status < 0)
- dev_dbg(&port->dev, "%s - port %d qt_close_channel failed.\n", __func__, port->number);
+ dev_dbg(&port->dev,
+ "%s - port %d qt_close_channel failed.\n",
+ __func__, port->number);
port0->open_ports--;
- dev_dbg(&port->dev, "qt_num_open_ports in close%d:in port%d\n", port0->open_ports, port->number);
+ dev_dbg(&port->dev, "qt_num_open_ports in close%d:in port%d\n",
+ port0->open_ports, port->number);
if (port0->open_ports == 0) {
if (serial->port[0]->interrupt_in_urb) {
- dev_dbg(&port->dev, "%s", "Shutdown interrupt_in_urb\n");
+ dev_dbg(&port->dev, "Shutdown interrupt_in_urb\n");
usb_kill_urb(serial->port[0]->interrupt_in_urb);
}
@@ -1053,7 +1071,8 @@
return -ENODEV;
if (count == 0) {
- dev_dbg(&port->dev, "%s - write request of 0 bytes\n", __func__);
+ dev_dbg(&port->dev,
+ "%s - write request of 0 bytes\n", __func__);
return 0;
}
@@ -1080,7 +1099,8 @@
/* send the data out the bulk port */
result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
if (result)
- dev_dbg(&port->dev, "%s - failed submitting write urb, error %d\n",
+ dev_dbg(&port->dev,
+ "%s - failed submitting write urb, error %d\n",
__func__, result);
else
result = count;
@@ -1163,7 +1183,8 @@
return 0;
}
- dev_dbg(&port->dev, "%s -No ioctl for that one. port = %d\n", __func__, port->number);
+ dev_dbg(&port->dev, "%s -No ioctl for that one. port = %d\n",
+ __func__, port->number);
return -ENOIOCTLCMD;
}
@@ -1238,7 +1259,8 @@
/* Now determine flow control */
if (cflag & CRTSCTS) {
- dev_dbg(&port->dev, "%s - Enabling HW flow control port %d\n", __func__, port->number);
+ dev_dbg(&port->dev, "%s - Enabling HW flow control port %d\n",
+ __func__, port->number);
/* Enable RTS/CTS flow control */
status = BoxSetHW_FlowCtrl(port->serial, index, 1);
@@ -1249,7 +1271,9 @@
}
} else {
/* Disable RTS/CTS flow control */
- dev_dbg(&port->dev, "%s - disabling HW flow control port %d\n", __func__, port->number);
+ dev_dbg(&port->dev,
+ "%s - disabling HW flow control port %d\n",
+ __func__, port->number);
status = BoxSetHW_FlowCtrl(port->serial, index, 0);
if (status < 0) {
@@ -1268,17 +1292,21 @@
BoxSetSW_FlowCtrl(port->serial, index, stop_char,
start_char);
if (status < 0)
- dev_dbg(&port->dev, "BoxSetSW_FlowCtrl (enabled) failed\n");
+ dev_dbg(&port->dev,
+ "BoxSetSW_FlowCtrl (enabled) failed\n");
} else {
/* disable SW flow control */
status = BoxDisable_SW_FlowCtrl(port->serial, index);
if (status < 0)
- dev_dbg(&port->dev, "BoxSetSW_FlowCtrl (diabling) failed\n");
+ dev_dbg(&port->dev,
+ "BoxSetSW_FlowCtrl (diabling) failed\n");
}
termios->c_cflag &= ~CMSPAR;
- /* FIXME: Error cases should be returning the actual bits changed only */
+ /* FIXME:
+ Error cases should be returning the actual bits changed only
+ */
}
static void qt_break(struct tty_struct *tty, int break_state)
@@ -1436,12 +1464,32 @@
mutex_unlock(&qt_port->lock);
}
+static void qt_submit_urb_from_unthrottle(struct usb_serial_port *port,
+ struct usb_serial *serial)
+{
+ int result;
+
+ /* Start reading from the device */
+ usb_fill_bulk_urb(port->read_urb, serial->dev,
+ usb_rcvbulkpipe(serial->dev,
+ port->bulk_in_endpointAddress),
+ port->read_urb->transfer_buffer,
+ port->read_urb->transfer_buffer_length,
+ qt_read_bulk_callback, port);
+
+ result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
+
+ if (result)
+ dev_err(&port->dev,
+ "%s - failed restarting read urb, error %d\n",
+ __func__, result);
+}
+
static void qt_unthrottle(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
struct usb_serial *serial = get_usb_serial(port, __func__);
struct quatech_port *qt_port;
- unsigned int result;
if (!serial)
return;
@@ -1457,21 +1505,8 @@
dev_dbg(&port->dev, "%s - qt_port->RxHolding = 0\n", __func__);
/* if we have a bulk endpoint, start it up */
- if ((serial->num_bulk_in) && (qt_port->ReadBulkStopped == 1)) {
- /* Start reading from the device */
- usb_fill_bulk_urb(port->read_urb, serial->dev,
- usb_rcvbulkpipe(serial->dev,
- port->bulk_in_endpointAddress),
- port->read_urb->transfer_buffer,
- port->read_urb->
- transfer_buffer_length,
- qt_read_bulk_callback, port);
- result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
- if (result)
- dev_err(&port->dev,
- "%s - failed restarting read urb, error %d\n",
- __func__, result);
- }
+ if ((serial->num_bulk_in) && (qt_port->ReadBulkStopped == 1))
+ qt_submit_urb_from_unthrottle(port, serial);
}
mutex_unlock(&qt_port->lock);
}
diff --git a/drivers/staging/silicom/bp_mod.c b/drivers/staging/silicom/bp_mod.c
index 3cfd051..58c5f5c 100644
--- a/drivers/staging/silicom/bp_mod.c
+++ b/drivers/staging/silicom/bp_mod.c
@@ -9,7 +9,6 @@
/* */
/* */
/******************************************************************************/
-#include <linux/version.h>
#include <linux/kernel.h> /* We're doing kernel work */
#include <linux/module.h> /* Specifically, a module */
@@ -4319,16 +4318,6 @@
del_timer_sync(&pbpctl_dev->bp_timer);
#ifdef BP_SELF_TEST
pbpctl_dev_sl = get_status_port_fn(pbpctl_dev);
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,31))
- if (pbpctl_dev_sl && (pbpctl_dev_sl->ndev)
- && (pbpctl_dev_sl->ndev->hard_start_xmit)
- && (pbpctl_dev_sl->hard_start_xmit_save)) {
- rtnl_lock();
- pbpctl_dev_sl->ndev->hard_start_xmit =
- pbpctl_dev_sl->hard_start_xmit_save;
- rtnl_unlock();
- }
-#else
if (pbpctl_dev_sl && (pbpctl_dev_sl->ndev)) {
if ((pbpctl_dev_sl->ndev->netdev_ops)
&& (pbpctl_dev_sl->old_ops)) {
@@ -4342,8 +4331,6 @@
}
}
-
-#endif
#endif
}
@@ -4433,23 +4420,7 @@
if (pbpctl_dev->bp_caps & WD_CTL_CAP) {
pbpctl_dev->bp_self_test_flag = param == 0 ? 0 : 1;
pbpctl_dev_sl = get_status_port_fn(pbpctl_dev);
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,31))
- if ((pbpctl_dev_sl->ndev) &&
- (pbpctl_dev_sl->ndev->hard_start_xmit)) {
- rtnl_lock();
- if (pbpctl_dev->bp_self_test_flag == 1) {
- pbpctl_dev_sl->hard_start_xmit_save =
- pbpctl_dev_sl->ndev->hard_start_xmit;
- pbpctl_dev_sl->ndev->hard_start_xmit =
- bp_hard_start_xmit;
- } else if (pbpctl_dev_sl->hard_start_xmit_save) {
- pbpctl_dev_sl->ndev->hard_start_xmit =
- pbpctl_dev_sl->hard_start_xmit_save;
- }
- rtnl_unlock();
- }
-#else
if ((pbpctl_dev_sl->ndev) && (pbpctl_dev_sl->ndev->netdev_ops)) {
rtnl_lock();
if (pbpctl_dev->bp_self_test_flag == 1) {
@@ -4470,7 +4441,6 @@
}
rtnl_unlock();
}
-#endif
set_bypass_wd_auto(pbpctl_dev, param);
return 0;
@@ -5428,15 +5398,8 @@
/* rcu_read_lock(); */
/* rtnl_lock(); */
/* rcu_read_lock(); */
-#if 1
-#if (LINUX_VERSION_CODE >= 0x020618)
- for_each_netdev(&init_net, dev)
-#elif (LINUX_VERSION_CODE >= 0x20616)
- for_each_netdev(dev)
-#else
- for (dev = dev_base; dev; dev = dev->next)
-#endif
- {
+
+ for_each_netdev(&init_net, dev) {
struct ethtool_drvinfo drvinfo;
char cbuf[32];
@@ -5454,8 +5417,6 @@
dev->ethtool_ops->get_drvinfo(dev, &drvinfo);
} else
continue;
- if (!drvinfo.bus_info)
- continue;
if (!strcmp(drvinfo.bus_info, "N/A"))
continue;
memcpy(&cbuf, drvinfo.bus_info, 32);
@@ -5491,22 +5452,14 @@
}
}
-#endif
/* rtnl_unlock(); */
/* rcu_read_unlock(); */
}
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30))
-static int device_ioctl(struct inode *inode, /* see include/linux/fs.h */
- struct file *file, /* ditto */
- unsigned int ioctl_num, /* number and param for ioctl */
- unsigned long ioctl_param)
-#else
-static long device_ioctl(struct file *file, /* ditto */
+static long device_ioctl(struct file *file, /* see include/linux/fs.h */
unsigned int ioctl_num, /* number and param for ioctl */
unsigned long ioctl_param)
-#endif
{
struct bpctl_cmd bpctl_cmd;
int dev_idx = 0;
@@ -5517,9 +5470,7 @@
static bpctl_dev_t *pbpctl_dev;
-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,30))
/* lock_kernel(); */
-#endif
lock_bpctl();
/* local_irq_save(flags); */
/* if(!spin_trylock_irqsave(&bpvm_lock)){
@@ -5900,9 +5851,7 @@
ret = -EFAULT;
ret = SUCCESS;
bp_exit:
-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,30))
/* unlock_kernel(); */
-#endif
/* spin_unlock_irqrestore(&bpvm_lock, flags); */
unlock_bpctl();
/* unlock_kernel(); */
@@ -5911,12 +5860,7 @@
struct file_operations Fops = {
.owner = THIS_MODULE,
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30))
- .ioctl = device_ioctl,
-#else
.unlocked_ioctl = device_ioctl,
-#endif
-
.open = device_open,
.release = device_release, /* a.k.a. close */
};
@@ -6952,15 +6896,8 @@
memset(bpctl_dev_arr[idx_dev].bp_tx_data + 7,
0xaa, 5);
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,9))
- bpctl_dev_arr[idx_dev].bp_tx_data[12] =
- (ETH_P_BPTEST >> 8) & 0xff;
- bpctl_dev_arr[idx_dev].bp_tx_data[13] =
- ETH_P_BPTEST & 0xff;
-#else
*(__be16 *) (bpctl_dev_arr[idx_dev].bp_tx_data +
12) = htons(ETH_P_BPTEST);
-#endif
} else
printk("bp_ctl: Memory allocation error!\n");
@@ -7009,83 +6946,6 @@
}
}
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0))
- inter_module_register("is_bypass_sd", THIS_MODULE, &is_bypass_sd);
- inter_module_register("get_bypass_slave_sd", THIS_MODULE,
- &get_bypass_slave_sd);
- inter_module_register("get_bypass_caps_sd", THIS_MODULE,
- &get_bypass_caps_sd);
- inter_module_register("get_wd_set_caps_sd", THIS_MODULE,
- &get_wd_set_caps_sd);
- inter_module_register("set_bypass_sd", THIS_MODULE, &set_bypass_sd);
- inter_module_register("get_bypass_sd", THIS_MODULE, &get_bypass_sd);
- inter_module_register("get_bypass_change_sd", THIS_MODULE,
- &get_bypass_change_sd);
- inter_module_register("set_dis_bypass_sd", THIS_MODULE,
- &set_dis_bypass_sd);
- inter_module_register("get_dis_bypass_sd", THIS_MODULE,
- &get_dis_bypass_sd);
- inter_module_register("set_bypass_pwoff_sd", THIS_MODULE,
- &set_bypass_pwoff_sd);
- inter_module_register("get_bypass_pwoff_sd", THIS_MODULE,
- &get_bypass_pwoff_sd);
- inter_module_register("set_bypass_pwup_sd", THIS_MODULE,
- &set_bypass_pwup_sd);
- inter_module_register("get_bypass_pwup_sd", THIS_MODULE,
- &get_bypass_pwup_sd);
- inter_module_register("get_bypass_wd_sd", THIS_MODULE,
- &get_bypass_wd_sd);
- inter_module_register("set_bypass_wd_sd", THIS_MODULE,
- &set_bypass_wd_sd);
- inter_module_register("get_wd_expire_time_sd", THIS_MODULE,
- &get_wd_expire_time_sd);
- inter_module_register("reset_bypass_wd_timer_sd", THIS_MODULE,
- &reset_bypass_wd_timer_sd);
- inter_module_register("set_std_nic_sd", THIS_MODULE, &set_std_nic_sd);
- inter_module_register("get_std_nic_sd", THIS_MODULE, &get_std_nic_sd);
- inter_module_register("set_tx_sd", THIS_MODULE, &set_tx_sd);
- inter_module_register("get_tx_sd", THIS_MODULE, &get_tx_sd);
- inter_module_register("set_tpl_sd", THIS_MODULE, &set_tpl_sd);
- inter_module_register("get_tpl_sd", THIS_MODULE, &get_tpl_sd);
-
- inter_module_register("set_bp_hw_reset_sd", THIS_MODULE,
- &set_bp_hw_reset_sd);
- inter_module_register("get_bp_hw_reset_sd", THIS_MODULE,
- &get_bp_hw_reset_sd);
-
- inter_module_register("set_tap_sd", THIS_MODULE, &set_tap_sd);
- inter_module_register("get_tap_sd", THIS_MODULE, &get_tap_sd);
- inter_module_register("get_tap_change_sd", THIS_MODULE,
- &get_tap_change_sd);
- inter_module_register("set_dis_tap_sd", THIS_MODULE, &set_dis_tap_sd);
- inter_module_register("get_dis_tap_sd", THIS_MODULE, &get_dis_tap_sd);
- inter_module_register("set_tap_pwup_sd", THIS_MODULE, &set_tap_pwup_sd);
- inter_module_register("get_tap_pwup_sd", THIS_MODULE, &get_tap_pwup_sd);
- inter_module_register("set_bp_disc_sd", THIS_MODULE, &set_bp_disc_sd);
- inter_module_register("get_bp_disc_sd", THIS_MODULE, &get_bp_disc_sd);
- inter_module_register("get_bp_disc_change_sd", THIS_MODULE,
- &get_bp_disc_change_sd);
- inter_module_register("set_bp_dis_disc_sd", THIS_MODULE,
- &set_bp_dis_disc_sd);
- inter_module_register("get_bp_dis_disc_sd", THIS_MODULE,
- &get_bp_dis_disc_sd);
- inter_module_register("set_bp_disc_pwup_sd", THIS_MODULE,
- &set_bp_disc_pwup_sd);
- inter_module_register("get_bp_disc_pwup_sd", THIS_MODULE,
- &get_bp_disc_pwup_sd);
- inter_module_register("set_wd_exp_mode_sd", THIS_MODULE,
- &set_wd_exp_mode_sd);
- inter_module_register("get_wd_exp_mode_sd", THIS_MODULE,
- &get_wd_exp_mode_sd);
- inter_module_register("set_wd_autoreset_sd", THIS_MODULE,
- &set_wd_autoreset_sd);
- inter_module_register("get_wd_autoreset_sd", THIS_MODULE,
- &get_wd_autoreset_sd);
- inter_module_register("get_bypass_info_sd", THIS_MODULE,
- &get_bypass_info_sd);
- inter_module_register("bp_if_scan_sd", THIS_MODULE, &bp_if_scan_sd);
-
-#endif
register_netdevice_notifier(&bp_notifier_block);
#ifdef BP_PROC_SUPPORT
{
@@ -7115,58 +6975,8 @@
static void __exit bypass_cleanup_module(void)
{
int i;
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,23))
- int ret;
-#endif
unregister_netdevice_notifier(&bp_notifier_block);
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0))
- inter_module_unregister("is_bypass_sd");
- inter_module_unregister("get_bypass_slave_sd");
- inter_module_unregister("get_bypass_caps_sd");
- inter_module_unregister("get_wd_set_caps_sd");
- inter_module_unregister("set_bypass_sd");
- inter_module_unregister("get_bypass_sd");
- inter_module_unregister("get_bypass_change_sd");
- inter_module_unregister("set_dis_bypass_sd");
- inter_module_unregister("get_dis_bypass_sd");
- inter_module_unregister("set_bypass_pwoff_sd");
- inter_module_unregister("get_bypass_pwoff_sd");
- inter_module_unregister("set_bypass_pwup_sd");
- inter_module_unregister("get_bypass_pwup_sd");
- inter_module_unregister("set_bypass_wd_sd");
- inter_module_unregister("get_bypass_wd_sd");
- inter_module_unregister("get_wd_expire_time_sd");
- inter_module_unregister("reset_bypass_wd_timer_sd");
- inter_module_unregister("set_std_nic_sd");
- inter_module_unregister("get_std_nic_sd");
- inter_module_unregister("set_tx_sd");
- inter_module_unregister("get_tx_sd");
- inter_module_unregister("set_tpl_sd");
- inter_module_unregister("get_tpl_sd");
- inter_module_unregister("set_tap_sd");
- inter_module_unregister("get_tap_sd");
- inter_module_unregister("get_tap_change_sd");
- inter_module_unregister("set_dis_tap_sd");
- inter_module_unregister("get_dis_tap_sd");
- inter_module_unregister("set_tap_pwup_sd");
- inter_module_unregister("get_tap_pwup_sd");
- inter_module_unregister("set_bp_disc_sd");
- inter_module_unregister("get_bp_disc_sd");
- inter_module_unregister("get_bp_disc_change_sd");
- inter_module_unregister("set_bp_dis_disc_sd");
- inter_module_unregister("get_bp_dis_disc_sd");
- inter_module_unregister("set_bp_disc_pwup_sd");
- inter_module_unregister("get_bp_disc_pwup_sd");
- inter_module_unregister("set_wd_exp_mode_sd");
- inter_module_unregister("get_wd_exp_mode_sd");
- inter_module_unregister("set_wd_autoreset_sd");
- inter_module_unregister("get_wd_autoreset_sd");
- inter_module_unregister("get_bypass_info_sd");
- inter_module_unregister("bp_if_scan_sd");
-
-#endif
-
for (i = 0; i < device_num; i++) {
/* unsigned long flags; */
#ifdef BP_PROC_SUPPORT
@@ -7198,17 +7008,7 @@
/*
* Unregister the device
*/
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,23))
- ret = unregister_chrdev(major_num, DEVICE_NAME);
-/*
-* If there's an error, report it
-*/
- if (ret < 0)
- printk("Error in module_unregister_chrdev: %d\n", ret);
-#else
unregister_chrdev(major_num, DEVICE_NAME);
-
-#endif
}
module_init(bypass_init_module);
@@ -7597,11 +7397,7 @@
}
if (pde == (struct proc_dir_entry *)0) {
/* create the directory */
-#if (LINUX_VERSION_CODE > 0x20300)
pde = proc_mkdir(name, proc_dir);
-#else
- pde = create_proc_entry(name, S_IFDIR, proc_dir);
-#endif
if (pde == (struct proc_dir_entry *)0) {
return pde;
@@ -7703,13 +7499,8 @@
return len;
}
net_slave_dev = pbp_device_block_slave->ndev;
- if (net_slave_dev) {
- if (net_slave_dev)
- len = sprintf(page, "%s\n", net_slave_dev->name);
- else
- len = sprintf(page, "fail\n");
-
- }
+ if (net_slave_dev)
+ len = sprintf(page, "%s\n", net_slave_dev->name);
*eof = 1;
return len;
diff --git a/drivers/staging/silicom/bp_proc.c b/drivers/staging/silicom/bp_proc.c
index 6ad4b27..a01ca97 100644
--- a/drivers/staging/silicom/bp_proc.c
+++ b/drivers/staging/silicom/bp_proc.c
@@ -10,21 +10,20 @@
/* */
/******************************************************************************/
-#include <linux/version.h>
-#if defined(CONFIG_SMP) && ! defined(__SMP__)
+#if defined(CONFIG_SMP) && !defined(__SMP__)
#define __SMP__
#endif
#include <linux/proc_fs.h>
#include <linux/netdevice.h>
#include <asm/uaccess.h>
-//#include <linux/smp_lock.h>
+/* #include <linux/smp_lock.h> */
#include "bp_mod.h"
#define BP_PROC_DIR "bypass"
-//#define BYPASS_SUPPORT "bypass"
+/* #define BYPASS_SUPPORT "bypass" */
-#ifdef BYPASS_SUPPORT
+#ifdef BYPASS_SUPPORT
#define GPIO6_SET_ENTRY_SD "gpio6_set"
#define GPIO6_CLEAR_ENTRY_SD "gpio6_clear"
@@ -70,7 +69,7 @@
#define DISC_CHANGE_ENTRY_SD "disc_change"
#define DIS_DISC_ENTRY_SD "dis_disc"
#define DISC_PWUP_ENTRY_SD "disc_pwup"
-#endif //bypass_support
+
static struct proc_dir_entry *bp_procfs_dir;
static struct proc_dir_entry *proc_getdir(char *name,
@@ -86,20 +85,17 @@
if (pde == (struct proc_dir_entry *)0) {
/* create the directory */
pde = create_proc_entry(name, S_IFDIR, proc_dir);
- if (pde == (struct proc_dir_entry *)0) {
- return (pde);
- }
+ if (pde == (struct proc_dir_entry *)0)
+ return pde;
}
- return (pde);
+ return pde;
}
-#ifdef BYPASS_SUPPORT
-
int
bypass_proc_create_entry_sd(struct pfs_unit *pfs_unit_curr,
char *proc_name,
- write_proc_t * write_proc,
- read_proc_t * read_proc,
+ write_proc_t *write_proc,
+ read_proc_t *read_proc,
struct proc_dir_entry *parent_pfs, void *data)
{
strcpy(pfs_unit_curr->proc_name, proc_name);
@@ -107,10 +103,8 @@
S_IFREG | S_IRUSR |
S_IWUSR | S_IRGRP |
S_IROTH, parent_pfs);
- if (pfs_unit_curr->proc_entry == 0) {
-
+ if (pfs_unit_curr->proc_entry == 0)
return -1;
- }
pfs_unit_curr->proc_entry->read_proc = read_proc;
pfs_unit_curr->proc_entry->write_proc = write_proc;
@@ -207,9 +201,8 @@
if (count > (sizeof(kbuf) - 1))
return -1;
- if (copy_from_user(&kbuf, buffer, count)) {
+ if (copy_from_user(&kbuf, buffer, count))
return -1;
- }
kbuf[count] = '\0';
length = strlen(kbuf);
@@ -239,9 +232,8 @@
if (count > (sizeof(kbuf) - 1))
return -1;
- if (copy_from_user(&kbuf, buffer, count)) {
+ if (copy_from_user(&kbuf, buffer, count))
return -1;
- }
kbuf[count] = '\0';
length = strlen(kbuf);
@@ -271,9 +263,8 @@
if (count > (sizeof(kbuf) - 1))
return -1;
- if (copy_from_user(&kbuf, buffer, count)) {
+ if (copy_from_user(&kbuf, buffer, count))
return -1;
- }
kbuf[count] = '\0';
length = strlen(kbuf);
@@ -421,9 +412,8 @@
unsigned int timeout = 0;
char *timeout_ptr = kbuf;
- if (copy_from_user(&kbuf, buffer, count)) {
+ if (copy_from_user(&kbuf, buffer, count))
return -1;
- }
timeout_ptr = kbuf;
timeout = atoi(&timeout_ptr);
@@ -570,9 +560,8 @@
int bypass_param = 0, length = 0;
- if (copy_from_user(&kbuf, buffer, count)) {
+ if (copy_from_user(&kbuf, buffer, count))
return -1;
- }
kbuf[count] = '\0';
length = strlen(kbuf);
@@ -599,9 +588,8 @@
int tap_param = 0, length = 0;
- if (copy_from_user(&kbuf, buffer, count)) {
+ if (copy_from_user(&kbuf, buffer, count))
return -1;
- }
kbuf[count] = '\0';
length = strlen(kbuf);
@@ -628,9 +616,8 @@
int tap_param = 0, length = 0;
- if (copy_from_user(&kbuf, buffer, count)) {
+ if (copy_from_user(&kbuf, buffer, count))
return -1;
- }
kbuf[count] = '\0';
length = strlen(kbuf);
@@ -717,9 +704,8 @@
int bypass_param = 0, length = 0;
- if (copy_from_user(&kbuf, buffer, count)) {
+ if (copy_from_user(&kbuf, buffer, count))
return -1;
- }
kbuf[count] = '\0';
length = strlen(kbuf);
@@ -746,9 +732,8 @@
int bypass_param = 0, length = 0;
- if (copy_from_user(&kbuf, buffer, count)) {
+ if (copy_from_user(&kbuf, buffer, count))
return -1;
- }
kbuf[count] = '\0';
length = strlen(kbuf);
@@ -775,9 +760,8 @@
int tap_param = 0, length = 0;
- if (copy_from_user(&kbuf, buffer, count)) {
+ if (copy_from_user(&kbuf, buffer, count))
return -1;
- }
kbuf[count] = '\0';
length = strlen(kbuf);
@@ -804,9 +788,8 @@
int tap_param = 0, length = 0;
- if (copy_from_user(&kbuf, buffer, count)) {
+ if (copy_from_user(&kbuf, buffer, count))
return -1;
- }
kbuf[count] = '\0';
length = strlen(kbuf);
@@ -913,9 +896,8 @@
int bypass_param = 0, length = 0;
- if (copy_from_user(&kbuf, buffer, count)) {
+ if (copy_from_user(&kbuf, buffer, count))
return -1;
- }
kbuf[count] = '\0';
length = strlen(kbuf);
@@ -988,9 +970,8 @@
if (count > (sizeof(kbuf) - 1))
return -1;
- if (copy_from_user(&kbuf, buffer, count)) {
+ if (copy_from_user(&kbuf, buffer, count))
return -1;
- }
kbuf[count] = '\0';
length = strlen(kbuf);
@@ -1036,9 +1017,8 @@
u32 timeout = 0;
char *timeout_ptr = kbuf;
- if (copy_from_user(&kbuf, buffer, count)) {
+ if (copy_from_user(&kbuf, buffer, count))
return -1;
- }
timeout_ptr = kbuf;
timeout = atoi(&timeout_ptr);
@@ -1061,9 +1041,8 @@
if (count > (sizeof(kbuf) - 1))
return -1;
- if (copy_from_user(&kbuf, buffer, count)) {
+ if (copy_from_user(&kbuf, buffer, count))
return -1;
- }
kbuf[count] = '\0';
length = strlen(kbuf);
@@ -1094,9 +1073,8 @@
if (count > (sizeof(kbuf) - 1))
return -1;
- if (copy_from_user(&kbuf, buffer, count)) {
+ if (copy_from_user(&kbuf, buffer, count))
return -1;
- }
kbuf[count] = '\0';
length = strlen(kbuf);
@@ -1126,9 +1104,8 @@
if (count > (sizeof(kbuf) - 1))
return -1;
- if (copy_from_user(&kbuf, buffer, count)) {
+ if (copy_from_user(&kbuf, buffer, count))
return -1;
- }
kbuf[count] = '\0';
length = strlen(kbuf);
@@ -1147,10 +1124,10 @@
#endif /*PMC_FIX_FLAG */
-int bypass_proc_create_dev_sd(bpctl_dev_t * pbp_device_block)
+int bypass_proc_create_dev_sd(bpctl_dev_t *pbp_device_block)
{
struct bypass_pfs_sd *current_pfs = &(pbp_device_block->bypass_pfs_set);
- static struct proc_dir_entry *procfs_dir = NULL;
+ static struct proc_dir_entry *procfs_dir;
int ret = 0;
sprintf(current_pfs->dir_name, "bypass_%s", dev->name);
@@ -1327,7 +1304,7 @@
return ret;
}
-int bypass_proc_remove_dev_sd(bpctl_dev_t * pbp_device_block)
+int bypass_proc_remove_dev_sd(bpctl_dev_t *pbp_device_block)
{
struct bypass_pfs_sd *current_pfs = &pbp_device_block->bypass_pfs_set;
diff --git a/drivers/staging/silicom/bypasslib/bplibk.h b/drivers/staging/silicom/bypasslib/bplibk.h
index a1c85ee..d8c1d27 100644
--- a/drivers/staging/silicom/bypasslib/bplibk.h
+++ b/drivers/staging/silicom/bypasslib/bplibk.h
@@ -28,16 +28,7 @@
((pid==INTEL_PEG4BPII_PID)|| \
(pid==INTEL_PEG4BPFII_PID)))
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,10))
-#define pci_get_class pci_find_class
-
-#define pci_get_device pci_find_device
-
-#endif
-
-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,10))
#define EXPORT_SYMBOL_NOVERS EXPORT_SYMBOL
-#endif
#ifdef BP_VENDOR_SUPPORT
char *bp_desc_array[] =
diff --git a/drivers/staging/silicom/bypasslib/bypass.c b/drivers/staging/silicom/bypasslib/bypass.c
index 527829d..95a1f18 100644
--- a/drivers/staging/silicom/bypasslib/bypass.c
+++ b/drivers/staging/silicom/bypasslib/bypass.c
@@ -11,7 +11,6 @@
/* */
/******************************************************************************/
-#include <linux/version.h>
#if defined(CONFIG_SMP) && ! defined(__SMP__)
#define __SMP__
#endif
diff --git a/drivers/staging/slicoss/slicoss.c b/drivers/staging/slicoss/slicoss.c
index cd920da..78578ee 100644
--- a/drivers/staging/slicoss/slicoss.c
+++ b/drivers/staging/slicoss/slicoss.c
@@ -142,39 +142,12 @@
MODULE_DEVICE_TABLE(pci, slic_pci_tbl);
-#ifdef ASSERT
-#undef ASSERT
-#endif
-
-static void slic_assert_fail(void)
-{
- u32 cpuid;
- u32 curr_pid;
- cpuid = smp_processor_id();
- curr_pid = current->pid;
-
- printk(KERN_ERR "%s CPU # %d ---- PID # %d\n",
- __func__, cpuid, curr_pid);
-}
-
-#ifndef ASSERT
-#define ASSERT(a) do { \
- if (!(a)) { \
- printk(KERN_ERR "slicoss ASSERT() Failure: function %s" \
- "line %d\n", __func__, __LINE__); \
- slic_assert_fail(); \
- } \
-} while (0)
-#endif
-
-
#define SLIC_GET_SLIC_HANDLE(_adapter, _pslic_handle) \
{ \
spin_lock_irqsave(&_adapter->handle_lock.lock, \
_adapter->handle_lock.flags); \
_pslic_handle = _adapter->pfree_slic_handles; \
if (_pslic_handle) { \
- ASSERT(_pslic_handle->type == SLIC_HANDLE_FREE); \
_adapter->pfree_slic_handles = _pslic_handle->next; \
} \
spin_unlock_irqrestore(&_adapter->handle_lock.lock, \
@@ -325,11 +298,8 @@
struct adapter *adapter;
struct sliccard *card;
- ASSERT(dev);
adapter = netdev_priv((struct net_device *)dev);
- ASSERT(adapter);
card = adapter->card;
- ASSERT(card);
adapter->pingtimer.expires = jiffies + (PING_TIMER_INTERVAL * HZ);
add_timer(&adapter->pingtimer);
@@ -361,9 +331,6 @@
if (adapter->state != ADAPT_UP)
return;
- ASSERT((adapter->devid == SLIC_1GB_DEVICE_ID)
- || (adapter->devid == SLIC_2GB_DEVICE_ID));
-
if (linkspeed > LINK_1000MB)
linkspeed = LINK_AUTOSPEED;
if (linkduplex > LINK_AUTOD)
@@ -593,8 +560,7 @@
file = "slicoss/gbdownload.sys";
break;
default:
- ASSERT(0);
- break;
+ return -ENOENT;
}
ret = request_firmware(&fw, file, &adapter->pcidev->dev);
if (ret) {
@@ -604,7 +570,6 @@
}
numsects = *(u32 *)(fw->data + index);
index += 4;
- ASSERT(numsects <= 3);
for (i = 0; i < numsects; i++) {
sectsize[i] = *(u32 *)(fw->data + index);
index += 4;
@@ -1060,8 +1025,6 @@
case SLIC_UPR_PING:
slic_reg32_write(&slic_regs->slic_ping, 1, FLUSH);
break;
- default:
- ASSERT(0);
}
}
@@ -1116,9 +1079,6 @@
if (adapter->state != ADAPT_UP)
return;
- ASSERT((adapter->devid == SLIC_1GB_DEVICE_ID)
- || (adapter->devid == SLIC_2GB_DEVICE_ID));
-
linkup = linkstatus & GIG_LINKUP ? LINK_UP : LINK_DOWN;
if (linkstatus & GIG_SPEED_1000)
linkspeed = LINK_1000MB;
@@ -1170,7 +1130,6 @@
spin_lock_irqsave(&adapter->upr_lock.lock, adapter->upr_lock.flags);
upr = adapter->upr_list;
if (!upr) {
- ASSERT(0);
spin_unlock_irqrestore(&adapter->upr_lock.lock,
adapter->upr_lock.flags);
return;
@@ -1178,7 +1137,6 @@
adapter->upr_list = upr->next;
upr->next = NULL;
adapter->upr_busy = 0;
- ASSERT(adapter->port == upr->adapter);
switch (upr->upr_request) {
case SLIC_UPR_STATS:
{
@@ -1260,23 +1218,9 @@
break;
case SLIC_UPR_RCONFIG:
break;
- case SLIC_UPR_RPHY:
- ASSERT(0);
- break;
- case SLIC_UPR_ENLB:
- ASSERT(0);
- break;
- case SLIC_UPR_ENCT:
- ASSERT(0);
- break;
- case SLIC_UPR_PDWN:
- ASSERT(0);
- break;
case SLIC_UPR_PING:
card->pingstatus |= (isr & ISR_PINGDSMASK);
break;
- default:
- ASSERT(0);
}
kfree(upr);
slic_upr_start(adapter);
@@ -1292,7 +1236,6 @@
status = slic_upr_request(adapter,
SLIC_UPR_RCONFIG,
(u32) config, (u32) config_h, 0, 0);
- ASSERT(status == 0);
}
/*
@@ -1422,7 +1365,6 @@
__iomem struct slic_regs *slic_regs = adapter->slic_regs;
u32 paddrh = 0;
- ASSERT(adapter->state == ADAPT_DOWN);
memset(rspq, 0, sizeof(struct slic_rspqueue));
rspq->num_pages = SLIC_RSPQ_PAGES_GB;
@@ -1439,14 +1381,6 @@
}
/* FIXME:
* do we really need this assertions (4K PAGE_SIZE aligned addr)? */
-#if 0
-#ifndef CONFIG_X86_64
- ASSERT(((u32) rspq->vaddr[i] & 0xFFFFF000) ==
- (u32) rspq->vaddr[i]);
- ASSERT(((u32) rspq->paddr[i] & 0xFFFFF000) ==
- (u32) rspq->paddr[i]);
-#endif
-#endif
memset(rspq->vaddr[i], 0, PAGE_SIZE);
if (paddrh == 0) {
@@ -1475,18 +1409,9 @@
return NULL;
buf = rspq->rspbuf;
-#if BITS_PER_LONG == 32
- ASSERT((buf->status & 0xFFFFFFE0) == 0);
-#endif
- ASSERT(buf->hosthandle);
if (++rspq->offset < SLIC_RSPQ_BUFSINPAGE) {
rspq->rspbuf++;
-#if BITS_PER_LONG == 32
- ASSERT(((u32) rspq->rspbuf & 0xFFFFFFE0) ==
- (u32) rspq->rspbuf);
-#endif
} else {
- ASSERT(rspq->offset == SLIC_RSPQ_BUFSINPAGE);
slic_reg64_write(adapter, &adapter->slic_regs->slic_rbar64,
(rspq->paddr[rspq->pageindex] | SLIC_RSPQ_BUFSINPAGE),
&adapter->slic_regs->slic_addr_upper, 0, DONT_FLUSH);
@@ -1494,24 +1419,11 @@
rspq->offset = 0;
rspq->rspbuf = (struct slic_rspbuf *)
rspq->vaddr[rspq->pageindex];
-#if BITS_PER_LONG == 32
- ASSERT(((u32) rspq->rspbuf & 0xFFFFF000) ==
- (u32) rspq->rspbuf);
-#endif
}
-#if BITS_PER_LONG == 32
- ASSERT(((u32) buf & 0xFFFFFFE0) == (u32) buf);
-#endif
+
return buf;
}
-static void slic_cmdqmem_init(struct adapter *adapter)
-{
- struct slic_cmdqmem *cmdqmem = &adapter->cmdqmem;
-
- memset(cmdqmem, 0, sizeof(struct slic_cmdqmem));
-}
-
static void slic_cmdqmem_free(struct adapter *adapter)
{
struct slic_cmdqmem *cmdqmem = &adapter->cmdqmem;
@@ -1540,9 +1452,7 @@
&cmdqmem->dma_pages[cmdqmem->pagecnt]);
if (!pageaddr)
return NULL;
-#if BITS_PER_LONG == 32
- ASSERT(((u32) pageaddr & 0xFFFFF000) == (u32) pageaddr);
-#endif
+
cmdqmem->pages[cmdqmem->pagecnt] = pageaddr;
cmdqmem->pagecnt++;
return pageaddr;
@@ -1598,11 +1508,6 @@
(adapter->slic_handle_ix < 256)) {
/* Allocate and initialize a SLIC_HANDLE for this command */
SLIC_GET_SLIC_HANDLE(adapter, pslic_handle);
- if (pslic_handle == NULL)
- ASSERT(0);
- ASSERT(pslic_handle ==
- &adapter->slic_handles[pslic_handle->token.
- handle_index]);
pslic_handle->type = SLIC_HANDLE_CMD;
pslic_handle->address = (void *) cmd;
pslic_handle->offset = (ushort) adapter->slic_handle_ix++;
@@ -1641,20 +1546,16 @@
int i;
u32 *pageaddr;
- ASSERT(adapter->state == ADAPT_DOWN);
memset(&adapter->cmdq_all, 0, sizeof(struct slic_cmdqueue));
memset(&adapter->cmdq_free, 0, sizeof(struct slic_cmdqueue));
memset(&adapter->cmdq_done, 0, sizeof(struct slic_cmdqueue));
spin_lock_init(&adapter->cmdq_all.lock.lock);
spin_lock_init(&adapter->cmdq_free.lock.lock);
spin_lock_init(&adapter->cmdq_done.lock.lock);
- slic_cmdqmem_init(adapter);
+ memset(&adapter->cmdqmem, 0, sizeof(struct slic_cmdqmem));
adapter->slic_handle_ix = 1;
for (i = 0; i < SLIC_CMDQ_INITPAGES; i++) {
pageaddr = slic_cmdqmem_addpage(adapter);
-#if BITS_PER_LONG == 32
- ASSERT(((u32) pageaddr & 0xFFFFF000) == (u32) pageaddr);
-#endif
if (!pageaddr) {
slic_cmdq_free(adapter);
return -ENOMEM;
@@ -1682,7 +1583,6 @@
while (hcmd) {
if (hcmd->busy) {
skb = hcmd->skb;
- ASSERT(skb);
hcmd->busy = 0;
hcmd->skb = NULL;
dev_kfree_skb_irq(skb);
@@ -1718,7 +1618,6 @@
struct slic_cmdqueue *done_cmdq = &adapter->cmdq_done;
struct slic_cmdqueue *free_cmdq = &adapter->cmdq_free;
- ASSERT(free_cmdq->head == NULL);
spin_lock_irqsave(&done_cmdq->lock.lock, done_cmdq->lock.flags);
free_cmdq->head = done_cmdq->head;
@@ -1884,7 +1783,6 @@
int i, count;
struct slic_rcvqueue *rcvq = &adapter->rcvqueue;
- ASSERT(adapter->state == ADAPT_DOWN);
rcvq->tail = NULL;
rcvq->head = NULL;
rcvq->size = SLIC_RCVQ_ENTRIES;
@@ -1913,7 +1811,6 @@
if (rcvq->count) {
skb = rcvq->head;
rcvbuf = (struct slic_rcvbuf *)skb->head;
- ASSERT(rcvbuf);
if (rcvbuf->status & IRHDDR_SVALID) {
rcvq->head = rcvq->head->next;
@@ -1946,8 +1843,6 @@
struct slic_rcvbuf *rcvbuf = (struct slic_rcvbuf *)skb->head;
struct device *dev;
- ASSERT(skb->len == SLIC_RCVBUF_HEADSIZE);
-
paddr = (void *)pci_map_single(adapter->pcidev, skb->head,
SLIC_RCVQ_RCVBUFSIZE, PCI_DMA_FROMDEVICE);
rcvbuf->status = 0;
@@ -2019,7 +1914,6 @@
card->adapters_activated);
seq_printf(seq, " Allocated : %d\n",
card->adapters_allocated);
- ASSERT(card->card_size <= SLIC_NBR_MACS);
for (i = 0; i < card->card_size; i++) {
seq_printf(seq,
" MAC%d : %2.2X %2.2X %2.2X %2.2X %2.2X %2.2X\n",
@@ -2460,7 +2354,6 @@
(u32) &pshmem->linkstatus, /* no 4GB wrap guaranteed */
0, 0, 0);
#endif
- ASSERT(status == 0);
}
static void slic_init_cleanup(struct adapter *adapter)
@@ -2524,8 +2417,6 @@
char *addresses;
struct netdev_hw_addr *ha;
- ASSERT(adapter);
-
netdev_for_each_mc_addr(ha, dev) {
addresses = (char *) &ha->addr;
status = slic_mcast_add_list(adapter, addresses);
@@ -2612,8 +2503,6 @@
"xmit_start skb[%p] type[%x] No host commands "
"available\n", skb, skb->pkt_type);
break;
- default:
- ASSERT(0);
}
}
dev_kfree_skb(skb);
@@ -2725,7 +2614,6 @@
while ((skb = slic_rcvqueue_getnext(adapter))) {
u32 rx_bytes;
- ASSERT(skb->head);
rcvbuf = (struct slic_rcvbuf *)skb->head;
adapter->card->events++;
if (rcvbuf->status & IRHDDR_ERR) {
@@ -2781,16 +2669,11 @@
Get the complete host command buffer
*/
slic_handle_word.handle_token = rspbuf->hosthandle;
- ASSERT(slic_handle_word.handle_index);
- ASSERT(slic_handle_word.handle_index <= SLIC_CMDQ_MAXCMDS);
hcmd =
(struct slic_hostcmd *)
adapter->slic_handles[slic_handle_word.handle_index].
address;
/* hcmd = (struct slic_hostcmd *) rspbuf->hosthandle; */
- ASSERT(hcmd);
- ASSERT(hcmd->pslic_handle ==
- &adapter->slic_handles[slic_handle_word.handle_index]);
if (hcmd->type == SLIC_CMD_DUMB) {
if (hcmd->skb)
dev_kfree_skb_irq(hcmd->skb);
@@ -2884,9 +2767,6 @@
slic_upr_request_complete(adapter, isr);
}
break;
-
- default:
- break;
}
adapter->isrcopy = 0;
@@ -2911,7 +2791,6 @@
void *offloadcmd = NULL;
card = adapter->card;
- ASSERT(card);
if ((adapter->linkstate != LINK_UP) ||
(adapter->state != ADAPT_UP) || (card->state != CARD_UP)) {
status = XMIT_FAIL_LINK_STATE;
@@ -2929,9 +2808,6 @@
status = XMIT_FAIL_HOSTCMD_FAIL;
goto xmit_fail;
}
- ASSERT(hcmd->pslic_handle);
- ASSERT(hcmd->cmd64.hosthandle ==
- hcmd->pslic_handle->token.handle_token);
hcmd->skb = skb;
hcmd->busy = 1;
hcmd->type = SLIC_CMD_DUMB;
@@ -3024,8 +2900,6 @@
struct slic_shmem *pshmem;
int rc;
- ASSERT(card);
-
/* adapter should be down at this point */
if (adapter->state != ADAPT_DOWN) {
dev_err(&dev->dev, "%s: adapter->state != ADAPT_DOWN\n",
@@ -3033,7 +2907,6 @@
rc = -EIO;
goto err;
}
- ASSERT(adapter->linkstate == LINK_DOWN);
adapter->devflags_prev = dev->flags;
adapter->macopts = MAC_DIRECTED;
@@ -3133,9 +3006,6 @@
struct sliccard *card = adapter->card;
int status;
- ASSERT(adapter);
- ASSERT(card);
-
netif_stop_queue(adapter->netdev);
spin_lock_irqsave(&slic_global.driver_lock.lock,
@@ -3176,7 +3046,7 @@
kfree(card);
}
-static void __devexit slic_entry_remove(struct pci_dev *pcidev)
+static void slic_entry_remove(struct pci_dev *pcidev)
{
struct net_device *dev = pci_get_drvdata(pcidev);
u32 mmio_start = 0;
@@ -3202,9 +3072,7 @@
mlist = mlist->next;
kfree(mcaddr);
}
- ASSERT(adapter->card);
card = adapter->card;
- ASSERT(card->adapters_allocated);
card->adapters_allocated--;
adapter->allocated = 0;
if (!card->adapters_allocated) {
@@ -3214,10 +3082,8 @@
} else {
while (curr_card->next != card)
curr_card = curr_card->next;
- ASSERT(curr_card);
curr_card->next = card->next;
}
- ASSERT(slic_global.num_slic_cards);
slic_global.num_slic_cards--;
slic_card_cleanup(card);
}
@@ -3234,14 +3100,12 @@
spin_lock_irqsave(&slic_global.driver_lock.lock,
slic_global.driver_lock.flags);
- ASSERT(card);
netif_stop_queue(adapter->netdev);
adapter->state = ADAPT_DOWN;
adapter->linkstate = LINK_DOWN;
adapter->upr_list = NULL;
adapter->upr_busy = 0;
adapter->devflags_prev = 0;
- ASSERT(card->adapter[adapter->cardindex] == adapter);
slic_reg32_write(&slic_regs->slic_icr, ICR_INT_OFF, FLUSH);
adapter->all_reg_writes++;
adapter->icr_reg_writes++;
@@ -3273,7 +3137,6 @@
{
struct adapter *adapter = netdev_priv(dev);
- ASSERT(adapter);
dev->stats.collisions = adapter->slic_stats.iface.xmit_collisions;
dev->stats.rx_errors = adapter->slic_stats.iface.rcv_errors;
dev->stats.tx_errors = adapter->slic_stats.iface.xmt_errors;
@@ -3296,7 +3159,6 @@
u32 data[7];
u32 intagg;
- ASSERT(rq);
switch (cmd) {
case SIOCSLICSETINTAGG:
if (copy_from_user(data, rq->ifr_data, 28))
@@ -3342,7 +3204,6 @@
}
#endif
case SIOCETHTOOL:
- ASSERT(adapter);
if (copy_from_user(&ecmd, rq->ifr_data, sizeof(ecmd)))
return -EFAULT;
@@ -3682,7 +3543,6 @@
/*
Initialize slic_handle array
*/
- ASSERT(SLIC_CMDQ_MAXCMDS <= 0xFFFF);
/*
Start with 1. 0 is an invalid host handle.
*/
@@ -3699,8 +3559,6 @@
sizeof(struct slic_shmem),
&adapter->
phys_shmem);
- ASSERT(adapter->pshmem);
-
if (adapter->pshmem)
memset(adapter->pshmem, 0, sizeof(struct slic_shmem));
}
@@ -3775,11 +3633,9 @@
}
}
- ASSERT(card);
if (!card)
return -ENXIO;
/* Put the adapter in the card's adapter list */
- ASSERT(card->adapter[adapter->port] == NULL);
if (!card->adapter[adapter->port]) {
card->adapter[adapter->port] = adapter;
adapter->card = card;
@@ -3794,7 +3650,6 @@
else
break;
}
- ASSERT(i != SLIC_MAX_PORTS);
if (physcard->adapter[i]->slotnumber == adapter->slotnumber)
break;
physcard = physcard->next;
@@ -3802,7 +3657,11 @@
if (!physcard) {
/* no structure allocated for this physical card yet */
physcard = kzalloc(sizeof(struct physcard), GFP_ATOMIC);
- ASSERT(physcard);
+ if (!physcard) {
+ if (card_hostid == SLIC_HOSTID_DEFAULT)
+ kfree(card);
+ return -ENOMEM;
+ }
physcard->next = slic_global.phys_card;
slic_global.phys_card = physcard;
@@ -3813,14 +3672,13 @@
/* Note - this is ZERO relative */
adapter->physport = physcard->adapters_allocd - 1;
- ASSERT(physcard->adapter[adapter->physport] == NULL);
physcard->adapter[adapter->physport] = adapter;
adapter->physcard = physcard;
return 0;
}
-static int __devinit slic_entry_probe(struct pci_dev *pcidev,
+static int slic_entry_probe(struct pci_dev *pcidev,
const struct pci_device_id *pci_tbl_entry)
{
static int cards_found;
@@ -3962,7 +3820,7 @@
.name = DRV_NAME,
.id_table = slic_pci_tbl,
.probe = slic_entry_probe,
- .remove = __devexit_p(slic_entry_remove),
+ .remove = slic_entry_remove,
};
static int __init slic_module_init(void)
diff --git a/drivers/staging/sm7xxfb/sm7xxfb.c b/drivers/staging/sm7xxfb/sm7xxfb.c
index f27182d..0764bbb 100644
--- a/drivers/staging/sm7xxfb/sm7xxfb.c
+++ b/drivers/staging/sm7xxfb/sm7xxfb.c
@@ -768,7 +768,7 @@
outb_p(0x11, 0x3c5);
}
-static int __devinit smtcfb_pci_probe(struct pci_dev *pdev,
+static int smtcfb_pci_probe(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
struct smtcfb_info *sfb;
@@ -928,7 +928,7 @@
{0,}
};
-static void __devexit smtcfb_pci_remove(struct pci_dev *pdev)
+static void smtcfb_pci_remove(struct pci_dev *pdev)
{
struct smtcfb_info *sfb;
@@ -1027,7 +1027,7 @@
.name = "smtcfb",
.id_table = smtcfb_pci_table,
.probe = smtcfb_pci_probe,
- .remove = __devexit_p(smtcfb_pci_remove),
+ .remove = smtcfb_pci_remove,
.driver.pm = SM7XX_PM_OPS,
};
diff --git a/drivers/staging/ste_rmi4/synaptics_i2c_rmi4.c b/drivers/staging/ste_rmi4/synaptics_i2c_rmi4.c
index 277491a..299f518 100644
--- a/drivers/staging/ste_rmi4/synaptics_i2c_rmi4.c
+++ b/drivers/staging/ste_rmi4/synaptics_i2c_rmi4.c
@@ -31,6 +31,7 @@
#include <linux/interrupt.h>
#include <linux/regulator/consumer.h>
#include <linux/module.h>
+#include <linux/input/mt.h>
#include "synaptics_i2c_rmi4.h"
/* TODO: for multiple device support will need a per-device mutex */
@@ -67,7 +68,6 @@
#define PDT_START_SCAN_LOCATION (0x00E9)
#define PDT_END_SCAN_LOCATION (0x000A)
#define PDT_ENTRY_SIZE (0x0006)
-#define RMI4_NUMBER_OF_MAX_FINGERS (8)
#define SYNAPTICS_RMI4_TOUCHPAD_FUNC_NUM (0x11)
#define SYNAPTICS_RMI4_DEVICE_CONTROL_FUNC_NUM (0x01)
@@ -164,6 +164,7 @@
* @regulator: pointer to the regulator structure
* @wait: wait queue structure variable
* @touch_stopped: flag to stop the thread function
+ * @fingers_supported: maximum supported fingers
*
* This structure gives the device data information.
*/
@@ -184,6 +185,7 @@
struct regulator *regulator;
wait_queue_head_t wait;
bool touch_stopped;
+ unsigned char fingers_supported;
};
/**
@@ -303,22 +305,21 @@
/* number of touch points - fingers down in this case */
int touch_count = 0;
int finger;
- int fingers_supported;
int finger_registers;
int reg;
int finger_shift;
int finger_status;
int retval;
+ int x, y;
+ int wx, wy;
unsigned short data_base_addr;
unsigned short data_offset;
unsigned char data_reg_blk_size;
unsigned char values[2];
unsigned char data[DATA_LEN];
- int x[RMI4_NUMBER_OF_MAX_FINGERS];
- int y[RMI4_NUMBER_OF_MAX_FINGERS];
- int wx[RMI4_NUMBER_OF_MAX_FINGERS];
- int wy[RMI4_NUMBER_OF_MAX_FINGERS];
+ unsigned char fingers_supported = pdata->fingers_supported;
struct i2c_client *client = pdata->i2c_client;
+ struct input_dev *input_dev = pdata->input_dev;
/* get 2D sensor finger data */
/*
@@ -333,7 +334,6 @@
* 10 = finger present but data may not be accurate,
* 11 = reserved for product use.
*/
- fingers_supported = rfi->num_of_data_points;
finger_registers = (fingers_supported + 3)/4;
data_base_addr = rfi->fn_desc.data_base_addr;
retval = synaptics_rmi4_i2c_block_read(pdata, data_base_addr, values,
@@ -358,7 +358,11 @@
* if finger status indicates a finger is present then
* read the finger data and report it
*/
- if (finger_status == 1 || finger_status == 2) {
+ input_mt_slot(input_dev, finger);
+ input_mt_report_slot_state(input_dev, MT_TOOL_FINGER,
+ finger_status != 0);
+
+ if (finger_status) {
/* Read the finger data */
data_offset = data_base_addr +
((finger * data_reg_blk_size) +
@@ -367,50 +371,33 @@
data_offset, data,
data_reg_blk_size);
if (retval != data_reg_blk_size) {
- printk(KERN_ERR "%s:read data failed\n",
+ dev_err(&client->dev, "%s:read data failed\n",
__func__);
return 0;
- } else {
- x[touch_count] =
- (data[0] << 4) | (data[2] & MASK_4BIT);
- y[touch_count] =
- (data[1] << 4) |
- ((data[2] >> 4) & MASK_4BIT);
- wy[touch_count] =
- (data[3] >> 4) & MASK_4BIT;
- wx[touch_count] =
- (data[3] & MASK_4BIT);
-
- if (pdata->board->x_flip)
- x[touch_count] =
- pdata->sensor_max_x -
- x[touch_count];
- if (pdata->board->y_flip)
- y[touch_count] =
- pdata->sensor_max_y -
- y[touch_count];
}
+ x = (data[0] << 4) | (data[2] & MASK_4BIT);
+ y = (data[1] << 4) | ((data[2] >> 4) & MASK_4BIT);
+ wy = (data[3] >> 4) & MASK_4BIT;
+ wx = (data[3] & MASK_4BIT);
+
+ if (pdata->board->x_flip)
+ x = pdata->sensor_max_x - x;
+ if (pdata->board->y_flip)
+ y = pdata->sensor_max_y - y;
+
+ input_report_abs(input_dev, ABS_MT_TOUCH_MAJOR,
+ max(wx, wy));
+ input_report_abs(input_dev, ABS_MT_POSITION_X, x);
+ input_report_abs(input_dev, ABS_MT_POSITION_Y, y);
+
/* number of active touch points */
touch_count++;
}
}
- /* report to input subsystem */
- if (touch_count) {
- for (finger = 0; finger < touch_count; finger++) {
- input_report_abs(pdata->input_dev, ABS_MT_TOUCH_MAJOR,
- max(wx[finger] , wy[finger]));
- input_report_abs(pdata->input_dev, ABS_MT_POSITION_X,
- x[finger]);
- input_report_abs(pdata->input_dev, ABS_MT_POSITION_Y,
- y[finger]);
- input_mt_sync(pdata->input_dev);
- }
- } else
- input_mt_sync(pdata->input_dev);
-
/* sync after groups of events */
- input_sync(pdata->input_dev);
+ input_mt_sync_frame(input_dev);
+ input_sync(input_dev);
/* return the number of touch points */
return touch_count;
}
@@ -575,6 +562,7 @@
if ((queries[1] & MASK_3BIT) == 5)
rfi->num_of_data_points = 10;
}
+ pdata->fingers_supported = rfi->num_of_data_points;
/* Need to get interrupt info for handling interrupts */
rfi->index_to_intr_reg = (interruptcount + 7)/8;
if (rfi->index_to_intr_reg != 0)
@@ -891,7 +879,7 @@
* the rmi4 Physical Device Table and enumerate any rmi4 functions that
* have data sources associated with them.
*/
-static int __devinit synaptics_rmi4_probe
+static int synaptics_rmi4_probe
(struct i2c_client *client, const struct i2c_device_id *dev_id)
{
int retval;
@@ -988,6 +976,8 @@
rmi4_data->sensor_max_y, 0, 0);
input_set_abs_params(rmi4_data->input_dev, ABS_MT_TOUCH_MAJOR, 0,
MAX_TOUCH_MAJOR, 0, 0);
+ input_mt_init_slots(rmi4_data->input_dev,
+ rmi4_data->fingers_supported, 0);
/* Clear interrupts */
synaptics_rmi4_i2c_block_read(rmi4_data,
@@ -1032,7 +1022,7 @@
* This function uses to remove the i2c-client
* touchscreen driver and returns integer.
*/
-static int __devexit synaptics_rmi4_remove(struct i2c_client *client)
+static int synaptics_rmi4_remove(struct i2c_client *client)
{
struct synaptics_rmi4_data *rmi4_data = i2c_get_clientdata(client);
const struct synaptics_rmi4_platform_data *pdata = rmi4_data->board;
@@ -1140,33 +1130,11 @@
#endif
},
.probe = synaptics_rmi4_probe,
- .remove = __devexit_p(synaptics_rmi4_remove),
+ .remove = synaptics_rmi4_remove,
.id_table = synaptics_rmi4_id_table,
};
-/**
- * synaptics_rmi4_init() - Initialize the touchscreen driver
- *
- * This function uses to initializes the synaptics
- * touchscreen driver and returns integer.
- */
-static int __init synaptics_rmi4_init(void)
-{
- return i2c_add_driver(&synaptics_rmi4_driver);
-}
-/**
- * synaptics_rmi4_exit() - De-initialize the touchscreen driver
- *
- * This function uses to de-initialize the synaptics
- * touchscreen driver and returns none.
- */
-static void __exit synaptics_rmi4_exit(void)
-{
- i2c_del_driver(&synaptics_rmi4_driver);
-}
-
-module_init(synaptics_rmi4_init);
-module_exit(synaptics_rmi4_exit);
+module_i2c_driver(synaptics_rmi4_driver);
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("naveen.gaddipati@stericsson.com, js.ha@stericsson.com");
diff --git a/drivers/staging/telephony/Kconfig b/drivers/staging/telephony/Kconfig
deleted file mode 100644
index b5f78b6..0000000
--- a/drivers/staging/telephony/Kconfig
+++ /dev/null
@@ -1,47 +0,0 @@
-#
-# Telephony device configuration
-#
-
-menuconfig PHONE
- tristate "Telephony support"
- depends on HAS_IOMEM
- ---help---
- Say Y here if you have a telephony card, which for example allows
- you to use a regular phone for voice-over-IP applications.
-
- Note: this has nothing to do with modems. You do not need to say Y
- here in order to be able to use a modem under Linux.
-
- To compile this driver as a module, choose M here: the
- module will be called phonedev.
-
-if PHONE
-
-config PHONE_IXJ
- tristate "QuickNet Internet LineJack/PhoneJack support"
- depends on ISA || PCI
- ---help---
- Say M if you have a telephony card manufactured by Quicknet
- Technologies, Inc. These include the Internet PhoneJACK and
- Internet LineJACK Telephony Cards. You will get a module called
- ixj.
-
- For the ISA versions of these products, you can configure the
- cards using the isapnp tools (pnpdump/isapnp) or you can use the
- isapnp support. Please read <file:Documentation/telephony/ixj.txt>.
-
- For more information on these cards, see Quicknet's web site at:
- <http://www.quicknet.net/>.
-
- If you do not have any Quicknet telephony cards, you can safely
- say N here.
-
-config PHONE_IXJ_PCMCIA
- tristate "QuickNet Internet LineJack/PhoneJack PCMCIA support"
- depends on PHONE_IXJ && PCMCIA
- help
- Say Y here to configure in PCMCIA service support for the Quicknet
- cards manufactured by Quicknet Technologies, Inc. This changes the
- card initialization code to work with the card manager daemon.
-
-endif # PHONE
diff --git a/drivers/staging/telephony/Makefile b/drivers/staging/telephony/Makefile
deleted file mode 100644
index 1206615..0000000
--- a/drivers/staging/telephony/Makefile
+++ /dev/null
@@ -1,7 +0,0 @@
-#
-# Makefile for drivers/telephony
-#
-
-obj-$(CONFIG_PHONE) += phonedev.o
-obj-$(CONFIG_PHONE_IXJ) += ixj.o
-obj-$(CONFIG_PHONE_IXJ_PCMCIA) += ixj_pcmcia.o
diff --git a/drivers/staging/telephony/TODO b/drivers/staging/telephony/TODO
deleted file mode 100644
index d47dec3..0000000
--- a/drivers/staging/telephony/TODO
+++ /dev/null
@@ -1,10 +0,0 @@
-TODO
-. Determine if the boards are still in use
- and move this module back to drivers/telephony if necessary
-. Coding style cleanups
-
-Please send patches to Greg Kroah-Hartman <greg@kroah.com> and
-cc Joe Perches <joe@perches.com> if the module should be reactivated.
-
-If no module activity occurs before version 3.6 is released, this
-module should be removed.
diff --git a/drivers/staging/telephony/ixj-ver.h b/drivers/staging/telephony/ixj-ver.h
deleted file mode 100644
index 2031ac6..0000000
--- a/drivers/staging/telephony/ixj-ver.h
+++ /dev/null
@@ -1,4 +0,0 @@
-/* configuration management identifiers */
-#define IXJ_VER_MAJOR 1
-#define IXJ_VER_MINOR 0
-#define IXJ_BLD_VER 1
diff --git a/drivers/staging/telephony/ixj.c b/drivers/staging/telephony/ixj.c
deleted file mode 100644
index 1cfa0b0..0000000
--- a/drivers/staging/telephony/ixj.c
+++ /dev/null
@@ -1,10571 +0,0 @@
-/****************************************************************************
- * ixj.c
- *
- * Device Driver for Quicknet Technologies, Inc.'s Telephony cards
- * including the Internet PhoneJACK, Internet PhoneJACK Lite,
- * Internet PhoneJACK PCI, Internet LineJACK, Internet PhoneCARD and
- * SmartCABLE
- *
- * (c) Copyright 1999-2001 Quicknet Technologies, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- * Author: Ed Okerson, <eokerson@quicknet.net>
- *
- * Contributors: Greg Herlein, <gherlein@quicknet.net>
- * David W. Erhart, <derhart@quicknet.net>
- * John Sellers, <jsellers@quicknet.net>
- * Mike Preston, <mpreston@quicknet.net>
- *
- * Fixes: David Huggins-Daines, <dhd@cepstral.com>
- * Fabio Ferrari, <fabio.ferrari@digitro.com.br>
- * Artis Kugevics, <artis@mt.lv>
- * Daniele Bellucci, <bellucda@tiscali.it>
- *
- * More information about the hardware related to this driver can be found
- * at our website: http://www.quicknet.net
- *
- * IN NO EVENT SHALL QUICKNET TECHNOLOGIES, INC. BE LIABLE TO ANY PARTY FOR
- * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT
- * OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF QUICKNET
- * TECHNOLOGIES, INC. HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * QUICKNET TECHNOLOGIES, INC. SPECIFICALLY DISCLAIMS ANY WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS
- * ON AN "AS IS" BASIS, AND QUICKNET TECHNOLOGIES, INC. HAS NO OBLIGATION
- * TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS.
- *
- ***************************************************************************/
-
-/*
- * Revision 4.8 2003/07/09 19:39:00 Daniele Bellucci
- * Audit some copy_*_user and minor cleanup.
- *
- * Revision 4.7 2001/08/13 06:19:33 craigs
- * Added additional changes from Alan Cox and John Anderson for
- * 2.2 to 2.4 cleanup and bounds checking
- *
- * Revision 4.6 2001/08/13 01:05:05 craigs
- * Really fixed PHONE_QUERY_CODEC problem this time
- *
- * Revision 4.5 2001/08/13 00:11:03 craigs
- * Fixed problem in handling of PHONE_QUERY_CODEC, thanks to Shane Anderson
- *
- * Revision 4.4 2001/08/07 07:58:12 craigs
- * Changed back to three digit version numbers
- * Added tagbuild target to allow automatic and easy tagging of versions
- *
- * Revision 4.3 2001/08/07 07:24:47 craigs
- * Added ixj-ver.h to allow easy configuration management of driver
- * Added display of version number in /prox/ixj
- *
- * Revision 4.2 2001/08/06 07:07:19 craigs
- * Reverted IXJCTL_DSP_TYPE and IXJCTL_DSP_VERSION files to original
- * behaviour of returning int rather than short *
- *
- * Revision 4.1 2001/08/05 00:17:37 craigs
- * More changes for correct PCMCIA installation
- * Start of changes for backward Linux compatibility
- *
- * Revision 4.0 2001/08/04 12:33:12 craigs
- * New version using GNU autoconf
- *
- * Revision 3.105 2001/07/20 23:14:32 eokerson
- * More work on CallerID generation when using ring cadences.
- *
- * Revision 3.104 2001/07/06 01:33:55 eokerson
- * Some bugfixes from Robert Vojta <vojta@ipex.cz> and a few mods to the Makefile.
- *
- * Revision 3.103 2001/07/05 19:20:16 eokerson
- * Updated HOWTO
- * Changed mic gain to 30dB on Internet LineJACK mic/speaker port.
- *
- * Revision 3.102 2001/07/03 23:51:21 eokerson
- * Un-mute mic on Internet LineJACK when in speakerphone mode.
- *
- * Revision 3.101 2001/07/02 19:26:56 eokerson
- * Removed initialiazation of ixjdebug and ixj_convert_loaded so they will go in the .bss instead of the .data
- *
- * Revision 3.100 2001/07/02 19:18:27 eokerson
- * Changed driver to make dynamic allocation possible. We now pass IXJ * between functions instead of array indexes.
- * Fixed the way the POTS and PSTN ports interact during a PSTN call to allow local answering.
- * Fixed speaker mode on Internet LineJACK.
- *
- * Revision 3.99 2001/05/09 14:11:16 eokerson
- * Fixed kmalloc error in ixj_build_filter_cadence. Thanks David Chan <cat@waulogy.stanford.edu>.
- *
- * Revision 3.98 2001/05/08 19:55:33 eokerson
- * Fixed POTS hookstate detection while it is connected to PSTN port.
- *
- * Revision 3.97 2001/05/08 00:01:04 eokerson
- * Fixed kernel oops when sending caller ID data.
- *
- * Revision 3.96 2001/05/04 23:09:30 eokerson
- * Now uses one kernel timer for each card, instead of one for the entire driver.
- *
- * Revision 3.95 2001/04/25 22:06:47 eokerson
- * Fixed squawking at beginning of some G.723.1 calls.
- *
- * Revision 3.94 2001/04/03 23:42:00 eokerson
- * Added linear volume ioctls
- * Added raw filter load ioctl
- *
- * Revision 3.93 2001/02/27 01:00:06 eokerson
- * Fixed blocking in CallerID.
- * Reduced size of ixj structure for smaller driver footprint.
- *
- * Revision 3.92 2001/02/20 22:02:59 eokerson
- * Fixed isapnp and pcmcia module compatibility for 2.4.x kernels.
- * Improved PSTN ring detection.
- * Fixed wink generation on POTS ports.
- *
- * Revision 3.91 2001/02/13 00:55:44 eokerson
- * Turn AEC back on after changing frame sizes.
- *
- * Revision 3.90 2001/02/12 16:42:00 eokerson
- * Added ALAW codec, thanks to Fabio Ferrari for the table based converters to make ALAW from ULAW.
- *
- * Revision 3.89 2001/02/12 15:41:16 eokerson
- * Fix from Artis Kugevics - Tone gains were not being set correctly.
- *
- * Revision 3.88 2001/02/05 23:25:42 eokerson
- * Fixed lockup bugs with deregister.
- *
- * Revision 3.87 2001/01/29 21:00:39 eokerson
- * Fix from Fabio Ferrari <fabio.ferrari@digitro.com.br> to properly handle EAGAIN and EINTR during non-blocking write.
- * Updated copyright date.
- *
- * Revision 3.86 2001/01/23 23:53:46 eokerson
- * Fixes to G.729 compatibility.
- *
- * Revision 3.85 2001/01/23 21:30:36 eokerson
- * Added verbage about cards supported.
- * Removed commands that put the card in low power mode at some times that it should not be in low power mode.
- *
- * Revision 3.84 2001/01/22 23:32:10 eokerson
- * Some bugfixes from David Huggins-Daines, <dhd@cepstral.com> and other cleanups.
- *
- * Revision 3.83 2001/01/19 14:51:41 eokerson
- * Fixed ixj_WriteDSPCommand to decrement usage counter when command fails.
- *
- * Revision 3.82 2001/01/19 00:34:49 eokerson
- * Added verbosity to write overlap errors.
- *
- * Revision 3.81 2001/01/18 23:56:54 eokerson
- * Fixed PSTN line test functions.
- *
- * Revision 3.80 2001/01/18 22:29:27 eokerson
- * Updated AEC/AGC values for different cards.
- *
- * Revision 3.79 2001/01/17 02:58:54 eokerson
- * Fixed AEC reset after Caller ID.
- * Fixed Codec lockup after Caller ID on Call Waiting when not using 30ms frames.
- *
- * Revision 3.78 2001/01/16 19:43:09 eokerson
- * Added support for Linux 2.4.x kernels.
- *
- * Revision 3.77 2001/01/09 04:00:52 eokerson
- * Linetest will now test the line, even if it has previously succeeded.
- *
- * Revision 3.76 2001/01/08 19:27:00 eokerson
- * Fixed problem with standard cable on Internet PhoneCARD.
- *
- * Revision 3.75 2000/12/22 16:52:14 eokerson
- * Modified to allow hookstate detection on the POTS port when the PSTN port is selected.
- *
- * Revision 3.74 2000/12/08 22:41:50 eokerson
- * Added capability for G729B.
- *
- * Revision 3.73 2000/12/07 23:35:16 eokerson
- * Added capability to have different ring pattern before CallerID data.
- * Added hookstate checks in CallerID routines to stop FSK.
- *
- * Revision 3.72 2000/12/06 19:31:31 eokerson
- * Modified signal behavior to only send one signal per event.
- *
- * Revision 3.71 2000/12/06 03:23:08 eokerson
- * Fixed CallerID on Call Waiting.
- *
- * Revision 3.70 2000/12/04 21:29:37 eokerson
- * Added checking to Smart Cable gain functions.
- *
- * Revision 3.69 2000/12/04 21:05:20 eokerson
- * Changed ixjdebug levels.
- * Added ioctls to change gains in Internet Phone CARD Smart Cable.
- *
- * Revision 3.68 2000/12/04 00:17:21 craigs
- * Changed mixer voice gain to +6dB rather than 0dB
- *
- * Revision 3.67 2000/11/30 21:25:51 eokerson
- * Fixed write signal errors.
- *
- * Revision 3.66 2000/11/29 22:42:44 eokerson
- * Fixed PSTN ring detect problems.
- *
- * Revision 3.65 2000/11/29 07:31:55 craigs
- * Added new 425Hz filter co-efficients
- * Added card-specific DTMF prescaler initialisation
- *
- * Revision 3.64 2000/11/28 14:03:32 craigs
- * Changed certain mixer initialisations to be 0dB rather than 12dB
- * Added additional information to /proc/ixj
- *
- * Revision 3.63 2000/11/28 11:38:41 craigs
- * Added display of AEC modes in AUTO and AGC mode
- *
- * Revision 3.62 2000/11/28 04:05:44 eokerson
- * Improved PSTN ring detection routine.
- *
- * Revision 3.61 2000/11/27 21:53:12 eokerson
- * Fixed flash detection.
- *
- * Revision 3.60 2000/11/27 15:57:29 eokerson
- * More work on G.729 load routines.
- *
- * Revision 3.59 2000/11/25 21:55:12 eokerson
- * Fixed errors in G.729 load routine.
- *
- * Revision 3.58 2000/11/25 04:08:29 eokerson
- * Added board locks around G.729 and TS85 load routines.
- *
- * Revision 3.57 2000/11/24 05:35:17 craigs
- * Added ability to retrieve mixer values on LineJACK
- * Added complete initialisation of all mixer values at startup
- * Fixed spelling mistake
- *
- * Revision 3.56 2000/11/23 02:52:11 robertj
- * Added cvs change log keyword.
- * Fixed bug in capabilities list when using G.729 module.
- *
- */
-
-#include "ixj-ver.h"
-
-#define PERFMON_STATS
-#define IXJDEBUG 0
-#define MAXRINGS 5
-
-#include <linux/module.h>
-
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/kernel.h> /* printk() */
-#include <linux/fs.h> /* everything... */
-#include <linux/errno.h> /* error codes */
-#include <linux/slab.h>
-#include <linux/mutex.h>
-#include <linux/mm.h>
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/proc_fs.h>
-#include <linux/poll.h>
-#include <linux/timer.h>
-#include <linux/delay.h>
-#include <linux/pci.h>
-
-#include <asm/io.h>
-#include <asm/uaccess.h>
-
-#include <linux/isapnp.h>
-
-#include "ixj.h"
-
-#define TYPE(inode) (iminor(inode) >> 4)
-#define NUM(inode) (iminor(inode) & 0xf)
-
-static DEFINE_MUTEX(ixj_mutex);
-static int ixjdebug;
-static int hertz = HZ;
-static int samplerate = 100;
-
-module_param(ixjdebug, int, 0);
-
-static DEFINE_PCI_DEVICE_TABLE(ixj_pci_tbl) = {
- { PCI_VENDOR_ID_QUICKNET, PCI_DEVICE_ID_QUICKNET_XJ,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
- { }
-};
-MODULE_DEVICE_TABLE(pci, ixj_pci_tbl);
-
-/************************************************************************
-*
-* ixjdebug meanings are now bit mapped instead of level based
-* Values can be or'ed together to turn on multiple messages
-*
-* bit 0 (0x0001) = any failure
-* bit 1 (0x0002) = general messages
-* bit 2 (0x0004) = POTS ringing related
-* bit 3 (0x0008) = PSTN events
-* bit 4 (0x0010) = PSTN Cadence state details
-* bit 5 (0x0020) = Tone detection triggers
-* bit 6 (0x0040) = Tone detection cadence details
-* bit 7 (0x0080) = ioctl tracking
-* bit 8 (0x0100) = signal tracking
-* bit 9 (0x0200) = CallerID generation details
-*
-************************************************************************/
-
-#ifdef IXJ_DYN_ALLOC
-
-static IXJ *ixj[IXJMAX];
-#define get_ixj(b) ixj[(b)]
-
-/*
- * Allocate a free IXJ device
- */
-
-static IXJ *ixj_alloc()
-{
- for(cnt=0; cnt<IXJMAX; cnt++)
- {
- if(ixj[cnt] == NULL || !ixj[cnt]->DSPbase)
- {
- j = kmalloc(sizeof(IXJ), GFP_KERNEL);
- if (j == NULL)
- return NULL;
- ixj[cnt] = j;
- return j;
- }
- }
- return NULL;
-}
-
-static void ixj_fsk_free(IXJ *j)
-{
- kfree(j->fskdata);
- j->fskdata = NULL;
-}
-
-static void ixj_fsk_alloc(IXJ *j)
-{
- if(!j->fskdata) {
- j->fskdata = kmalloc(8000, GFP_KERNEL);
- if (!j->fskdata) {
- if(ixjdebug & 0x0200) {
- printk("IXJ phone%d - allocate failed\n", j->board);
- }
- return;
- } else {
- j->fsksize = 8000;
- if(ixjdebug & 0x0200) {
- printk("IXJ phone%d - allocate succeeded\n", j->board);
- }
- }
- }
-}
-
-#else
-
-static IXJ ixj[IXJMAX];
-#define get_ixj(b) (&ixj[(b)])
-
-/*
- * Allocate a free IXJ device
- */
-
-static IXJ *ixj_alloc(void)
-{
- int cnt;
- for(cnt=0; cnt<IXJMAX; cnt++) {
- if(!ixj[cnt].DSPbase)
- return &ixj[cnt];
- }
- return NULL;
-}
-
-static inline void ixj_fsk_free(IXJ *j) {;}
-
-static inline void ixj_fsk_alloc(IXJ *j)
-{
- j->fsksize = 8000;
-}
-
-#endif
-
-#ifdef PERFMON_STATS
-#define ixj_perfmon(x) ((x)++)
-#else
-#define ixj_perfmon(x) do { } while(0)
-#endif
-
-static int ixj_convert_loaded;
-
-static int ixj_WriteDSPCommand(unsigned short, IXJ *j);
-
-/************************************************************************
-*
-* These are function definitions to allow external modules to register
-* enhanced functionality call backs.
-*
-************************************************************************/
-
-static int Stub(IXJ * J, unsigned long arg)
-{
- return 0;
-}
-
-static IXJ_REGFUNC ixj_PreRead = &Stub;
-static IXJ_REGFUNC ixj_PostRead = &Stub;
-static IXJ_REGFUNC ixj_PreWrite = &Stub;
-static IXJ_REGFUNC ixj_PostWrite = &Stub;
-
-static void ixj_read_frame(IXJ *j);
-static void ixj_write_frame(IXJ *j);
-static void ixj_init_timer(IXJ *j);
-static void ixj_add_timer(IXJ * j);
-static void ixj_timeout(unsigned long ptr);
-static int read_filters(IXJ *j);
-static int LineMonitor(IXJ *j);
-static int ixj_fasync(int fd, struct file *, int mode);
-static int ixj_set_port(IXJ *j, int arg);
-static int ixj_set_pots(IXJ *j, int arg);
-static int ixj_hookstate(IXJ *j);
-static int ixj_record_start(IXJ *j);
-static void ixj_record_stop(IXJ *j);
-static void set_rec_volume(IXJ *j, int volume);
-static int get_rec_volume(IXJ *j);
-static int set_rec_codec(IXJ *j, int rate);
-static void ixj_vad(IXJ *j, int arg);
-static int ixj_play_start(IXJ *j);
-static void ixj_play_stop(IXJ *j);
-static int ixj_set_tone_on(unsigned short arg, IXJ *j);
-static int ixj_set_tone_off(unsigned short, IXJ *j);
-static int ixj_play_tone(IXJ *j, char tone);
-static void ixj_aec_start(IXJ *j, int level);
-static int idle(IXJ *j);
-static void ixj_ring_on(IXJ *j);
-static void ixj_ring_off(IXJ *j);
-static void aec_stop(IXJ *j);
-static void ixj_ringback(IXJ *j);
-static void ixj_busytone(IXJ *j);
-static void ixj_dialtone(IXJ *j);
-static void ixj_cpt_stop(IXJ *j);
-static char daa_int_read(IXJ *j);
-static char daa_CR_read(IXJ *j, int cr);
-static int daa_set_mode(IXJ *j, int mode);
-static int ixj_linetest(IXJ *j);
-static int ixj_daa_write(IXJ *j);
-static int ixj_daa_cid_read(IXJ *j);
-static void DAA_Coeff_US(IXJ *j);
-static void DAA_Coeff_UK(IXJ *j);
-static void DAA_Coeff_France(IXJ *j);
-static void DAA_Coeff_Germany(IXJ *j);
-static void DAA_Coeff_Australia(IXJ *j);
-static void DAA_Coeff_Japan(IXJ *j);
-static int ixj_init_filter(IXJ *j, IXJ_FILTER * jf);
-static int ixj_init_filter_raw(IXJ *j, IXJ_FILTER_RAW * jfr);
-static int ixj_init_tone(IXJ *j, IXJ_TONE * ti);
-static int ixj_build_cadence(IXJ *j, IXJ_CADENCE __user * cp);
-static int ixj_build_filter_cadence(IXJ *j, IXJ_FILTER_CADENCE __user * cp);
-/* Serial Control Interface funtions */
-static int SCI_Control(IXJ *j, int control);
-static int SCI_Prepare(IXJ *j);
-static int SCI_WaitHighSCI(IXJ *j);
-static int SCI_WaitLowSCI(IXJ *j);
-static DWORD PCIEE_GetSerialNumber(WORD wAddress);
-static int ixj_PCcontrol_wait(IXJ *j);
-static void ixj_pre_cid(IXJ *j);
-static void ixj_write_cid(IXJ *j);
-static void ixj_write_cid_bit(IXJ *j, int bit);
-static int set_base_frame(IXJ *j, int size);
-static int set_play_codec(IXJ *j, int rate);
-static void set_rec_depth(IXJ *j, int depth);
-static int ixj_mixer(long val, IXJ *j);
-
-/************************************************************************
-CT8020/CT8021 Host Programmers Model
-Host address Function Access
-DSPbase +
-0-1 Aux Software Status Register (reserved) Read Only
-2-3 Software Status Register Read Only
-4-5 Aux Software Control Register (reserved) Read Write
-6-7 Software Control Register Read Write
-8-9 Hardware Status Register Read Only
-A-B Hardware Control Register Read Write
-C-D Host Transmit (Write) Data Buffer Access Port (buffer input)Write Only
-E-F Host Receive (Read) Data Buffer Access Port (buffer input) Read Only
-************************************************************************/
-
-static inline void ixj_read_HSR(IXJ *j)
-{
- j->hsr.bytes.low = inb_p(j->DSPbase + 8);
- j->hsr.bytes.high = inb_p(j->DSPbase + 9);
-}
-
-static inline int IsControlReady(IXJ *j)
-{
- ixj_read_HSR(j);
- return j->hsr.bits.controlrdy ? 1 : 0;
-}
-
-static inline int IsPCControlReady(IXJ *j)
-{
- j->pccr1.byte = inb_p(j->XILINXbase + 3);
- return j->pccr1.bits.crr ? 1 : 0;
-}
-
-static inline int IsStatusReady(IXJ *j)
-{
- ixj_read_HSR(j);
- return j->hsr.bits.statusrdy ? 1 : 0;
-}
-
-static inline int IsRxReady(IXJ *j)
-{
- ixj_read_HSR(j);
- ixj_perfmon(j->rxreadycheck);
- return j->hsr.bits.rxrdy ? 1 : 0;
-}
-
-static inline int IsTxReady(IXJ *j)
-{
- ixj_read_HSR(j);
- ixj_perfmon(j->txreadycheck);
- return j->hsr.bits.txrdy ? 1 : 0;
-}
-
-static inline void set_play_volume(IXJ *j, int volume)
-{
- if (ixjdebug & 0x0002)
- printk(KERN_INFO "IXJ: /dev/phone%d Setting Play Volume to 0x%4.4x\n", j->board, volume);
- ixj_WriteDSPCommand(0xCF02, j);
- ixj_WriteDSPCommand(volume, j);
-}
-
-static int set_play_volume_linear(IXJ *j, int volume)
-{
- int newvolume, dspplaymax;
-
- if (ixjdebug & 0x0002)
- printk(KERN_INFO "IXJ: /dev/phone %d Setting Linear Play Volume to 0x%4.4x\n", j->board, volume);
- if(volume > 100 || volume < 0) {
- return -1;
- }
-
- /* This should normalize the perceived volumes between the different cards caused by differences in the hardware */
- switch (j->cardtype) {
- case QTI_PHONEJACK:
- dspplaymax = 0x380;
- break;
- case QTI_LINEJACK:
- if(j->port == PORT_PSTN) {
- dspplaymax = 0x48;
- } else {
- dspplaymax = 0x100;
- }
- break;
- case QTI_PHONEJACK_LITE:
- dspplaymax = 0x380;
- break;
- case QTI_PHONEJACK_PCI:
- dspplaymax = 0x6C;
- break;
- case QTI_PHONECARD:
- dspplaymax = 0x50;
- break;
- default:
- return -1;
- }
- newvolume = (dspplaymax * volume) / 100;
- set_play_volume(j, newvolume);
- return 0;
-}
-
-static inline void set_play_depth(IXJ *j, int depth)
-{
- if (depth > 60)
- depth = 60;
- if (depth < 0)
- depth = 0;
- ixj_WriteDSPCommand(0x5280 + depth, j);
-}
-
-static inline int get_play_volume(IXJ *j)
-{
- ixj_WriteDSPCommand(0xCF00, j);
- return j->ssr.high << 8 | j->ssr.low;
-}
-
-static int get_play_volume_linear(IXJ *j)
-{
- int volume, newvolume, dspplaymax;
-
- /* This should normalize the perceived volumes between the different cards caused by differences in the hardware */
- switch (j->cardtype) {
- case QTI_PHONEJACK:
- dspplaymax = 0x380;
- break;
- case QTI_LINEJACK:
- if(j->port == PORT_PSTN) {
- dspplaymax = 0x48;
- } else {
- dspplaymax = 0x100;
- }
- break;
- case QTI_PHONEJACK_LITE:
- dspplaymax = 0x380;
- break;
- case QTI_PHONEJACK_PCI:
- dspplaymax = 0x6C;
- break;
- case QTI_PHONECARD:
- dspplaymax = 100;
- break;
- default:
- return -1;
- }
- volume = get_play_volume(j);
- newvolume = (volume * 100) / dspplaymax;
- if(newvolume > 100)
- newvolume = 100;
- return newvolume;
-}
-
-static inline BYTE SLIC_GetState(IXJ *j)
-{
- if (j->cardtype == QTI_PHONECARD) {
- j->pccr1.byte = 0;
- j->psccr.bits.dev = 3;
- j->psccr.bits.rw = 1;
- outw_p(j->psccr.byte << 8, j->XILINXbase + 0x00);
- ixj_PCcontrol_wait(j);
- j->pslic.byte = inw_p(j->XILINXbase + 0x00) & 0xFF;
- ixj_PCcontrol_wait(j);
- if (j->pslic.bits.powerdown)
- return PLD_SLIC_STATE_OC;
- else if (!j->pslic.bits.ring0 && !j->pslic.bits.ring1)
- return PLD_SLIC_STATE_ACTIVE;
- else
- return PLD_SLIC_STATE_RINGING;
- } else {
- j->pld_slicr.byte = inb_p(j->XILINXbase + 0x01);
- }
- return j->pld_slicr.bits.state;
-}
-
-static bool SLIC_SetState(BYTE byState, IXJ *j)
-{
- bool fRetVal = false;
-
- if (j->cardtype == QTI_PHONECARD) {
- if (j->flags.pcmciasct) {
- switch (byState) {
- case PLD_SLIC_STATE_TIPOPEN:
- case PLD_SLIC_STATE_OC:
- j->pslic.bits.powerdown = 1;
- j->pslic.bits.ring0 = j->pslic.bits.ring1 = 0;
- fRetVal = true;
- break;
- case PLD_SLIC_STATE_RINGING:
- if (j->readers || j->writers) {
- j->pslic.bits.powerdown = 0;
- j->pslic.bits.ring0 = 1;
- j->pslic.bits.ring1 = 0;
- fRetVal = true;
- }
- break;
- case PLD_SLIC_STATE_OHT: /* On-hook transmit */
-
- case PLD_SLIC_STATE_STANDBY:
- case PLD_SLIC_STATE_ACTIVE:
- if (j->readers || j->writers) {
- j->pslic.bits.powerdown = 0;
- } else {
- j->pslic.bits.powerdown = 1;
- }
- j->pslic.bits.ring0 = j->pslic.bits.ring1 = 0;
- fRetVal = true;
- break;
- case PLD_SLIC_STATE_APR: /* Active polarity reversal */
-
- case PLD_SLIC_STATE_OHTPR: /* OHT polarity reversal */
-
- default:
- fRetVal = false;
- break;
- }
- j->psccr.bits.dev = 3;
- j->psccr.bits.rw = 0;
- outw_p(j->psccr.byte << 8 | j->pslic.byte, j->XILINXbase + 0x00);
- ixj_PCcontrol_wait(j);
- }
- } else {
- /* Set the C1, C2, C3 & B2EN signals. */
- switch (byState) {
- case PLD_SLIC_STATE_OC:
- j->pld_slicw.bits.c1 = 0;
- j->pld_slicw.bits.c2 = 0;
- j->pld_slicw.bits.c3 = 0;
- j->pld_slicw.bits.b2en = 0;
- outb_p(j->pld_slicw.byte, j->XILINXbase + 0x01);
- fRetVal = true;
- break;
- case PLD_SLIC_STATE_RINGING:
- j->pld_slicw.bits.c1 = 1;
- j->pld_slicw.bits.c2 = 0;
- j->pld_slicw.bits.c3 = 0;
- j->pld_slicw.bits.b2en = 1;
- outb_p(j->pld_slicw.byte, j->XILINXbase + 0x01);
- fRetVal = true;
- break;
- case PLD_SLIC_STATE_ACTIVE:
- j->pld_slicw.bits.c1 = 0;
- j->pld_slicw.bits.c2 = 1;
- j->pld_slicw.bits.c3 = 0;
- j->pld_slicw.bits.b2en = 0;
- outb_p(j->pld_slicw.byte, j->XILINXbase + 0x01);
- fRetVal = true;
- break;
- case PLD_SLIC_STATE_OHT: /* On-hook transmit */
-
- j->pld_slicw.bits.c1 = 1;
- j->pld_slicw.bits.c2 = 1;
- j->pld_slicw.bits.c3 = 0;
- j->pld_slicw.bits.b2en = 0;
- outb_p(j->pld_slicw.byte, j->XILINXbase + 0x01);
- fRetVal = true;
- break;
- case PLD_SLIC_STATE_TIPOPEN:
- j->pld_slicw.bits.c1 = 0;
- j->pld_slicw.bits.c2 = 0;
- j->pld_slicw.bits.c3 = 1;
- j->pld_slicw.bits.b2en = 0;
- outb_p(j->pld_slicw.byte, j->XILINXbase + 0x01);
- fRetVal = true;
- break;
- case PLD_SLIC_STATE_STANDBY:
- j->pld_slicw.bits.c1 = 1;
- j->pld_slicw.bits.c2 = 0;
- j->pld_slicw.bits.c3 = 1;
- j->pld_slicw.bits.b2en = 1;
- outb_p(j->pld_slicw.byte, j->XILINXbase + 0x01);
- fRetVal = true;
- break;
- case PLD_SLIC_STATE_APR: /* Active polarity reversal */
-
- j->pld_slicw.bits.c1 = 0;
- j->pld_slicw.bits.c2 = 1;
- j->pld_slicw.bits.c3 = 1;
- j->pld_slicw.bits.b2en = 0;
- outb_p(j->pld_slicw.byte, j->XILINXbase + 0x01);
- fRetVal = true;
- break;
- case PLD_SLIC_STATE_OHTPR: /* OHT polarity reversal */
-
- j->pld_slicw.bits.c1 = 1;
- j->pld_slicw.bits.c2 = 1;
- j->pld_slicw.bits.c3 = 1;
- j->pld_slicw.bits.b2en = 0;
- outb_p(j->pld_slicw.byte, j->XILINXbase + 0x01);
- fRetVal = true;
- break;
- default:
- fRetVal = false;
- break;
- }
- }
-
- return fRetVal;
-}
-
-static int ixj_wink(IXJ *j)
-{
- BYTE slicnow;
-
- slicnow = SLIC_GetState(j);
-
- j->pots_winkstart = jiffies;
- SLIC_SetState(PLD_SLIC_STATE_OC, j);
-
- msleep(jiffies_to_msecs(j->winktime));
-
- SLIC_SetState(slicnow, j);
- return 0;
-}
-
-static void ixj_init_timer(IXJ *j)
-{
- init_timer(&j->timer);
- j->timer.function = ixj_timeout;
- j->timer.data = (unsigned long)j;
-}
-
-static void ixj_add_timer(IXJ *j)
-{
- j->timer.expires = jiffies + (hertz / samplerate);
- add_timer(&j->timer);
-}
-
-static void ixj_tone_timeout(IXJ *j)
-{
- IXJ_TONE ti;
-
- j->tone_state++;
- if (j->tone_state == 3) {
- j->tone_state = 0;
- if (j->cadence_t) {
- j->tone_cadence_state++;
- if (j->tone_cadence_state >= j->cadence_t->elements_used) {
- switch (j->cadence_t->termination) {
- case PLAY_ONCE:
- ixj_cpt_stop(j);
- break;
- case REPEAT_LAST_ELEMENT:
- j->tone_cadence_state--;
- ixj_play_tone(j, j->cadence_t->ce[j->tone_cadence_state].index);
- break;
- case REPEAT_ALL:
- j->tone_cadence_state = 0;
- if (j->cadence_t->ce[j->tone_cadence_state].freq0) {
- ti.tone_index = j->cadence_t->ce[j->tone_cadence_state].index;
- ti.freq0 = j->cadence_t->ce[j->tone_cadence_state].freq0;
- ti.gain0 = j->cadence_t->ce[j->tone_cadence_state].gain0;
- ti.freq1 = j->cadence_t->ce[j->tone_cadence_state].freq1;
- ti.gain1 = j->cadence_t->ce[j->tone_cadence_state].gain1;
- ixj_init_tone(j, &ti);
- }
- ixj_set_tone_on(j->cadence_t->ce[0].tone_on_time, j);
- ixj_set_tone_off(j->cadence_t->ce[0].tone_off_time, j);
- ixj_play_tone(j, j->cadence_t->ce[0].index);
- break;
- }
- } else {
- if (j->cadence_t->ce[j->tone_cadence_state].gain0) {
- ti.tone_index = j->cadence_t->ce[j->tone_cadence_state].index;
- ti.freq0 = j->cadence_t->ce[j->tone_cadence_state].freq0;
- ti.gain0 = j->cadence_t->ce[j->tone_cadence_state].gain0;
- ti.freq1 = j->cadence_t->ce[j->tone_cadence_state].freq1;
- ti.gain1 = j->cadence_t->ce[j->tone_cadence_state].gain1;
- ixj_init_tone(j, &ti);
- }
- ixj_set_tone_on(j->cadence_t->ce[j->tone_cadence_state].tone_on_time, j);
- ixj_set_tone_off(j->cadence_t->ce[j->tone_cadence_state].tone_off_time, j);
- ixj_play_tone(j, j->cadence_t->ce[j->tone_cadence_state].index);
- }
- }
- }
-}
-
-static inline void ixj_kill_fasync(IXJ *j, IXJ_SIGEVENT event, int dir)
-{
- if(j->ixj_signals[event]) {
- if(ixjdebug & 0x0100)
- printk("Sending signal for event %d\n", event);
- /* Send apps notice of change */
- /* see config.h for macro definition */
- kill_fasync(&(j->async_queue), j->ixj_signals[event], dir);
- }
-}
-
-static void ixj_pstn_state(IXJ *j)
-{
- int var;
- union XOPXR0 XR0, daaint;
-
- var = 10;
-
- XR0.reg = j->m_DAAShadowRegs.XOP_REGS.XOP.xr0.reg;
- daaint.reg = 0;
- XR0.bitreg.RMR = j->m_DAAShadowRegs.SOP_REGS.SOP.cr1.bitreg.RMR;
-
- j->pld_scrr.byte = inb_p(j->XILINXbase);
- if (j->pld_scrr.bits.daaflag) {
- daa_int_read(j);
- if(j->m_DAAShadowRegs.XOP_REGS.XOP.xr0.bitreg.RING) {
- if(time_after(jiffies, j->pstn_sleeptil) && !(j->flags.pots_pstn && j->hookstate)) {
- daaint.bitreg.RING = 1;
- if(ixjdebug & 0x0008) {
- printk(KERN_INFO "IXJ DAA Ring Interrupt /dev/phone%d at %ld\n", j->board, jiffies);
- }
- } else {
- daa_set_mode(j, SOP_PU_RESET);
- }
- }
- if(j->m_DAAShadowRegs.XOP_REGS.XOP.xr0.bitreg.Caller_ID) {
- daaint.bitreg.Caller_ID = 1;
- j->pstn_cid_intr = 1;
- j->pstn_cid_received = jiffies;
- if(ixjdebug & 0x0008) {
- printk(KERN_INFO "IXJ DAA Caller_ID Interrupt /dev/phone%d at %ld\n", j->board, jiffies);
- }
- }
- if(j->m_DAAShadowRegs.XOP_REGS.XOP.xr0.bitreg.Cadence) {
- daaint.bitreg.Cadence = 1;
- if(ixjdebug & 0x0008) {
- printk(KERN_INFO "IXJ DAA Cadence Interrupt /dev/phone%d at %ld\n", j->board, jiffies);
- }
- }
- if(j->m_DAAShadowRegs.XOP_REGS.XOP.xr0.bitreg.VDD_OK != XR0.bitreg.VDD_OK) {
- daaint.bitreg.VDD_OK = 1;
- daaint.bitreg.SI_0 = j->m_DAAShadowRegs.XOP_REGS.XOP.xr0.bitreg.VDD_OK;
- }
- }
- daa_CR_read(j, 1);
- if(j->m_DAAShadowRegs.SOP_REGS.SOP.cr1.bitreg.RMR != XR0.bitreg.RMR && time_after(jiffies, j->pstn_sleeptil) && !(j->flags.pots_pstn && j->hookstate)) {
- daaint.bitreg.RMR = 1;
- daaint.bitreg.SI_1 = j->m_DAAShadowRegs.SOP_REGS.SOP.cr1.bitreg.RMR;
- if(ixjdebug & 0x0008) {
- printk(KERN_INFO "IXJ DAA RMR /dev/phone%d was %s for %ld\n", j->board, XR0.bitreg.RMR?"on":"off", jiffies - j->pstn_last_rmr);
- }
- j->pstn_prev_rmr = j->pstn_last_rmr;
- j->pstn_last_rmr = jiffies;
- }
- switch(j->daa_mode) {
- case SOP_PU_SLEEP:
- if (daaint.bitreg.RING) {
- if (!j->flags.pstn_ringing) {
- if (j->daa_mode != SOP_PU_RINGING) {
- j->pstn_ring_int = jiffies;
- daa_set_mode(j, SOP_PU_RINGING);
- }
- }
- }
- break;
- case SOP_PU_RINGING:
- if (daaint.bitreg.RMR) {
- if (ixjdebug & 0x0008) {
- printk(KERN_INFO "IXJ Ring Cadence a state = %d /dev/phone%d at %ld\n", j->cadence_f[4].state, j->board, jiffies);
- }
- if (daaint.bitreg.SI_1) { /* Rising edge of RMR */
- j->flags.pstn_rmr = 1;
- j->pstn_ring_start = jiffies;
- j->pstn_ring_stop = 0;
- j->ex.bits.pstn_ring = 0;
- if (j->cadence_f[4].state == 0) {
- j->cadence_f[4].state = 1;
- j->cadence_f[4].on1min = jiffies + (long)((j->cadence_f[4].on1 * hertz * (100 - var)) / 10000);
- j->cadence_f[4].on1dot = jiffies + (long)((j->cadence_f[4].on1 * hertz * (100)) / 10000);
- j->cadence_f[4].on1max = jiffies + (long)((j->cadence_f[4].on1 * hertz * (100 + var)) / 10000);
- } else if (j->cadence_f[4].state == 2) {
- if((time_after(jiffies, j->cadence_f[4].off1min) &&
- time_before(jiffies, j->cadence_f[4].off1max))) {
- if (j->cadence_f[4].on2) {
- j->cadence_f[4].state = 3;
- j->cadence_f[4].on2min = jiffies + (long)((j->cadence_f[4].on2 * (hertz * (100 - var)) / 10000));
- j->cadence_f[4].on2dot = jiffies + (long)((j->cadence_f[4].on2 * (hertz * (100)) / 10000));
- j->cadence_f[4].on2max = jiffies + (long)((j->cadence_f[4].on2 * (hertz * (100 + var)) / 10000));
- } else {
- j->cadence_f[4].state = 7;
- }
- } else {
- if (ixjdebug & 0x0008) {
- printk(KERN_INFO "IXJ Ring Cadence fail state = %d /dev/phone%d at %ld should be %d\n",
- j->cadence_f[4].state, j->board, jiffies - j->pstn_prev_rmr,
- j->cadence_f[4].off1);
- }
- j->cadence_f[4].state = 0;
- }
- } else if (j->cadence_f[4].state == 4) {
- if((time_after(jiffies, j->cadence_f[4].off2min) &&
- time_before(jiffies, j->cadence_f[4].off2max))) {
- if (j->cadence_f[4].on3) {
- j->cadence_f[4].state = 5;
- j->cadence_f[4].on3min = jiffies + (long)((j->cadence_f[4].on3 * (hertz * (100 - var)) / 10000));
- j->cadence_f[4].on3dot = jiffies + (long)((j->cadence_f[4].on3 * (hertz * (100)) / 10000));
- j->cadence_f[4].on3max = jiffies + (long)((j->cadence_f[4].on3 * (hertz * (100 + var)) / 10000));
- } else {
- j->cadence_f[4].state = 7;
- }
- } else {
- if (ixjdebug & 0x0008) {
- printk(KERN_INFO "IXJ Ring Cadence fail state = %d /dev/phone%d at %ld should be %d\n",
- j->cadence_f[4].state, j->board, jiffies - j->pstn_prev_rmr,
- j->cadence_f[4].off2);
- }
- j->cadence_f[4].state = 0;
- }
- } else if (j->cadence_f[4].state == 6) {
- if((time_after(jiffies, j->cadence_f[4].off3min) &&
- time_before(jiffies, j->cadence_f[4].off3max))) {
- j->cadence_f[4].state = 7;
- } else {
- if (ixjdebug & 0x0008) {
- printk(KERN_INFO "IXJ Ring Cadence fail state = %d /dev/phone%d at %ld should be %d\n",
- j->cadence_f[4].state, j->board, jiffies - j->pstn_prev_rmr,
- j->cadence_f[4].off3);
- }
- j->cadence_f[4].state = 0;
- }
- } else {
- j->cadence_f[4].state = 0;
- }
- } else { /* Falling edge of RMR */
- j->pstn_ring_start = 0;
- j->pstn_ring_stop = jiffies;
- if (j->cadence_f[4].state == 1) {
- if(!j->cadence_f[4].on1) {
- j->cadence_f[4].state = 7;
- } else if((time_after(jiffies, j->cadence_f[4].on1min) &&
- time_before(jiffies, j->cadence_f[4].on1max))) {
- if (j->cadence_f[4].off1) {
- j->cadence_f[4].state = 2;
- j->cadence_f[4].off1min = jiffies + (long)((j->cadence_f[4].off1 * (hertz * (100 - var)) / 10000));
- j->cadence_f[4].off1dot = jiffies + (long)((j->cadence_f[4].off1 * (hertz * (100)) / 10000));
- j->cadence_f[4].off1max = jiffies + (long)((j->cadence_f[4].off1 * (hertz * (100 + var)) / 10000));
- } else {
- j->cadence_f[4].state = 7;
- }
- } else {
- if (ixjdebug & 0x0008) {
- printk(KERN_INFO "IXJ Ring Cadence fail state = %d /dev/phone%d at %ld should be %d\n",
- j->cadence_f[4].state, j->board, jiffies - j->pstn_prev_rmr,
- j->cadence_f[4].on1);
- }
- j->cadence_f[4].state = 0;
- }
- } else if (j->cadence_f[4].state == 3) {
- if((time_after(jiffies, j->cadence_f[4].on2min) &&
- time_before(jiffies, j->cadence_f[4].on2max))) {
- if (j->cadence_f[4].off2) {
- j->cadence_f[4].state = 4;
- j->cadence_f[4].off2min = jiffies + (long)((j->cadence_f[4].off2 * (hertz * (100 - var)) / 10000));
- j->cadence_f[4].off2dot = jiffies + (long)((j->cadence_f[4].off2 * (hertz * (100)) / 10000));
- j->cadence_f[4].off2max = jiffies + (long)((j->cadence_f[4].off2 * (hertz * (100 + var)) / 10000));
- } else {
- j->cadence_f[4].state = 7;
- }
- } else {
- if (ixjdebug & 0x0008) {
- printk(KERN_INFO "IXJ Ring Cadence fail state = %d /dev/phone%d at %ld should be %d\n",
- j->cadence_f[4].state, j->board, jiffies - j->pstn_prev_rmr,
- j->cadence_f[4].on2);
- }
- j->cadence_f[4].state = 0;
- }
- } else if (j->cadence_f[4].state == 5) {
- if((time_after(jiffies, j->cadence_f[4].on3min) &&
- time_before(jiffies, j->cadence_f[4].on3max))) {
- if (j->cadence_f[4].off3) {
- j->cadence_f[4].state = 6;
- j->cadence_f[4].off3min = jiffies + (long)((j->cadence_f[4].off3 * (hertz * (100 - var)) / 10000));
- j->cadence_f[4].off3dot = jiffies + (long)((j->cadence_f[4].off3 * (hertz * (100)) / 10000));
- j->cadence_f[4].off3max = jiffies + (long)((j->cadence_f[4].off3 * (hertz * (100 + var)) / 10000));
- } else {
- j->cadence_f[4].state = 7;
- }
- } else {
- j->cadence_f[4].state = 0;
- }
- } else {
- if (ixjdebug & 0x0008) {
- printk(KERN_INFO "IXJ Ring Cadence fail state = %d /dev/phone%d at %ld should be %d\n",
- j->cadence_f[4].state, j->board, jiffies - j->pstn_prev_rmr,
- j->cadence_f[4].on3);
- }
- j->cadence_f[4].state = 0;
- }
- }
- if (ixjdebug & 0x0010) {
- printk(KERN_INFO "IXJ Ring Cadence b state = %d /dev/phone%d at %ld\n", j->cadence_f[4].state, j->board, jiffies);
- }
- if (ixjdebug & 0x0010) {
- switch(j->cadence_f[4].state) {
- case 1:
- printk(KERN_INFO "IXJ /dev/phone%d Next Ring Cadence state at %u min %ld - %ld - max %ld\n", j->board,
- j->cadence_f[4].on1, j->cadence_f[4].on1min, j->cadence_f[4].on1dot, j->cadence_f[4].on1max);
- break;
- case 2:
- printk(KERN_INFO "IXJ /dev/phone%d Next Ring Cadence state at %u min %ld - %ld - max %ld\n", j->board,
- j->cadence_f[4].off1, j->cadence_f[4].off1min, j->cadence_f[4].off1dot, j->cadence_f[4].off1max);
- break;
- case 3:
- printk(KERN_INFO "IXJ /dev/phone%d Next Ring Cadence state at %u min %ld - %ld - max %ld\n", j->board,
- j->cadence_f[4].on2, j->cadence_f[4].on2min, j->cadence_f[4].on2dot, j->cadence_f[4].on2max);
- break;
- case 4:
- printk(KERN_INFO "IXJ /dev/phone%d Next Ring Cadence state at %u min %ld - %ld - max %ld\n", j->board,
- j->cadence_f[4].off2, j->cadence_f[4].off2min, j->cadence_f[4].off2dot, j->cadence_f[4].off2max);
- break;
- case 5:
- printk(KERN_INFO "IXJ /dev/phone%d Next Ring Cadence state at %u min %ld - %ld - max %ld\n", j->board,
- j->cadence_f[4].on3, j->cadence_f[4].on3min, j->cadence_f[4].on3dot, j->cadence_f[4].on3max);
- break;
- case 6:
- printk(KERN_INFO "IXJ /dev/phone%d Next Ring Cadence state at %u min %ld - %ld - max %ld\n", j->board,
- j->cadence_f[4].off3, j->cadence_f[4].off3min, j->cadence_f[4].off3dot, j->cadence_f[4].off3max);
- break;
- }
- }
- }
- if (j->cadence_f[4].state == 7) {
- j->cadence_f[4].state = 0;
- j->pstn_ring_stop = jiffies;
- j->ex.bits.pstn_ring = 1;
- ixj_kill_fasync(j, SIG_PSTN_RING, POLL_IN);
- if(ixjdebug & 0x0008) {
- printk(KERN_INFO "IXJ Ring int set /dev/phone%d at %ld\n", j->board, jiffies);
- }
- }
- if((j->pstn_ring_int != 0 && time_after(jiffies, j->pstn_ring_int + (hertz * 5)) && !j->flags.pstn_rmr) ||
- (j->pstn_ring_stop != 0 && time_after(jiffies, j->pstn_ring_stop + (hertz * 5)))) {
- if(ixjdebug & 0x0008) {
- printk("IXJ DAA no ring in 5 seconds /dev/phone%d at %ld\n", j->board, jiffies);
- printk("IXJ DAA pstn ring int /dev/phone%d at %ld\n", j->board, j->pstn_ring_int);
- printk("IXJ DAA pstn ring stop /dev/phone%d at %ld\n", j->board, j->pstn_ring_stop);
- }
- j->pstn_ring_stop = j->pstn_ring_int = 0;
- daa_set_mode(j, SOP_PU_SLEEP);
- }
- outb_p(j->pld_scrw.byte, j->XILINXbase);
- if (j->pstn_cid_intr && time_after(jiffies, j->pstn_cid_received + hertz)) {
- ixj_daa_cid_read(j);
- j->ex.bits.caller_id = 1;
- ixj_kill_fasync(j, SIG_CALLER_ID, POLL_IN);
- j->pstn_cid_intr = 0;
- }
- if (daaint.bitreg.Cadence) {
- if(ixjdebug & 0x0008) {
- printk("IXJ DAA Cadence interrupt going to sleep /dev/phone%d\n", j->board);
- }
- daa_set_mode(j, SOP_PU_SLEEP);
- j->ex.bits.pstn_ring = 0;
- }
- break;
- case SOP_PU_CONVERSATION:
- if (daaint.bitreg.VDD_OK) {
- if(!daaint.bitreg.SI_0) {
- if (!j->pstn_winkstart) {
- if(ixjdebug & 0x0008) {
- printk("IXJ DAA possible wink /dev/phone%d %ld\n", j->board, jiffies);
- }
- j->pstn_winkstart = jiffies;
- }
- } else {
- if (j->pstn_winkstart) {
- if(ixjdebug & 0x0008) {
- printk("IXJ DAA possible wink end /dev/phone%d %ld\n", j->board, jiffies);
- }
- j->pstn_winkstart = 0;
- }
- }
- }
- if (j->pstn_winkstart && time_after(jiffies, j->pstn_winkstart + ((hertz * j->winktime) / 1000))) {
- if(ixjdebug & 0x0008) {
- printk("IXJ DAA wink detected going to sleep /dev/phone%d %ld\n", j->board, jiffies);
- }
- daa_set_mode(j, SOP_PU_SLEEP);
- j->pstn_winkstart = 0;
- j->ex.bits.pstn_wink = 1;
- ixj_kill_fasync(j, SIG_PSTN_WINK, POLL_IN);
- }
- break;
- }
-}
-
-static void ixj_timeout(unsigned long ptr)
-{
- int board;
- unsigned long jifon;
- IXJ *j = (IXJ *)ptr;
- board = j->board;
-
- if (j->DSPbase && atomic_read(&j->DSPWrite) == 0 && test_and_set_bit(board, (void *)&j->busyflags) == 0) {
- ixj_perfmon(j->timerchecks);
- j->hookstate = ixj_hookstate(j);
- if (j->tone_state) {
- if (!(j->hookstate)) {
- ixj_cpt_stop(j);
- if (j->m_hook) {
- j->m_hook = 0;
- j->ex.bits.hookstate = 1;
- ixj_kill_fasync(j, SIG_HOOKSTATE, POLL_IN);
- }
- clear_bit(board, &j->busyflags);
- ixj_add_timer(j);
- return;
- }
- if (j->tone_state == 1)
- jifon = ((hertz * j->tone_on_time) * 25 / 100000);
- else
- jifon = ((hertz * j->tone_on_time) * 25 / 100000) + ((hertz * j->tone_off_time) * 25 / 100000);
- if (time_before(jiffies, j->tone_start_jif + jifon)) {
- if (j->tone_state == 1) {
- ixj_play_tone(j, j->tone_index);
- if (j->dsp.low == 0x20) {
- clear_bit(board, &j->busyflags);
- ixj_add_timer(j);
- return;
- }
- } else {
- ixj_play_tone(j, 0);
- if (j->dsp.low == 0x20) {
- clear_bit(board, &j->busyflags);
- ixj_add_timer(j);
- return;
- }
- }
- } else {
- ixj_tone_timeout(j);
- if (j->flags.dialtone) {
- ixj_dialtone(j);
- }
- if (j->flags.busytone) {
- ixj_busytone(j);
- if (j->dsp.low == 0x20) {
- clear_bit(board, &j->busyflags);
- ixj_add_timer(j);
- return;
- }
- }
- if (j->flags.ringback) {
- ixj_ringback(j);
- if (j->dsp.low == 0x20) {
- clear_bit(board, &j->busyflags);
- ixj_add_timer(j);
- return;
- }
- }
- if (!j->tone_state) {
- ixj_cpt_stop(j);
- }
- }
- }
- if (!(j->tone_state && j->dsp.low == 0x20)) {
- if (IsRxReady(j)) {
- ixj_read_frame(j);
- }
- if (IsTxReady(j)) {
- ixj_write_frame(j);
- }
- }
- if (j->flags.cringing) {
- if (j->hookstate & 1) {
- j->flags.cringing = 0;
- ixj_ring_off(j);
- } else if(j->cadence_f[5].enable && ((!j->cadence_f[5].en_filter) || (j->cadence_f[5].en_filter && j->flags.firstring))) {
- switch(j->cadence_f[5].state) {
- case 0:
- j->cadence_f[5].on1dot = jiffies + (long)((j->cadence_f[5].on1 * (hertz * 100) / 10000));
- if (time_before(jiffies, j->cadence_f[5].on1dot)) {
- if(ixjdebug & 0x0004) {
- printk("Ringing cadence state = %d - %ld\n", j->cadence_f[5].state, jiffies);
- }
- ixj_ring_on(j);
- }
- j->cadence_f[5].state = 1;
- break;
- case 1:
- if (time_after(jiffies, j->cadence_f[5].on1dot)) {
- j->cadence_f[5].off1dot = jiffies + (long)((j->cadence_f[5].off1 * (hertz * 100) / 10000));
- if(ixjdebug & 0x0004) {
- printk("Ringing cadence state = %d - %ld\n", j->cadence_f[5].state, jiffies);
- }
- ixj_ring_off(j);
- j->cadence_f[5].state = 2;
- }
- break;
- case 2:
- if (time_after(jiffies, j->cadence_f[5].off1dot)) {
- if(ixjdebug & 0x0004) {
- printk("Ringing cadence state = %d - %ld\n", j->cadence_f[5].state, jiffies);
- }
- ixj_ring_on(j);
- if (j->cadence_f[5].on2) {
- j->cadence_f[5].on2dot = jiffies + (long)((j->cadence_f[5].on2 * (hertz * 100) / 10000));
- j->cadence_f[5].state = 3;
- } else {
- j->cadence_f[5].state = 7;
- }
- }
- break;
- case 3:
- if (time_after(jiffies, j->cadence_f[5].on2dot)) {
- if(ixjdebug & 0x0004) {
- printk("Ringing cadence state = %d - %ld\n", j->cadence_f[5].state, jiffies);
- }
- ixj_ring_off(j);
- if (j->cadence_f[5].off2) {
- j->cadence_f[5].off2dot = jiffies + (long)((j->cadence_f[5].off2 * (hertz * 100) / 10000));
- j->cadence_f[5].state = 4;
- } else {
- j->cadence_f[5].state = 7;
- }
- }
- break;
- case 4:
- if (time_after(jiffies, j->cadence_f[5].off2dot)) {
- if(ixjdebug & 0x0004) {
- printk("Ringing cadence state = %d - %ld\n", j->cadence_f[5].state, jiffies);
- }
- ixj_ring_on(j);
- if (j->cadence_f[5].on3) {
- j->cadence_f[5].on3dot = jiffies + (long)((j->cadence_f[5].on3 * (hertz * 100) / 10000));
- j->cadence_f[5].state = 5;
- } else {
- j->cadence_f[5].state = 7;
- }
- }
- break;
- case 5:
- if (time_after(jiffies, j->cadence_f[5].on3dot)) {
- if(ixjdebug & 0x0004) {
- printk("Ringing cadence state = %d - %ld\n", j->cadence_f[5].state, jiffies);
- }
- ixj_ring_off(j);
- if (j->cadence_f[5].off3) {
- j->cadence_f[5].off3dot = jiffies + (long)((j->cadence_f[5].off3 * (hertz * 100) / 10000));
- j->cadence_f[5].state = 6;
- } else {
- j->cadence_f[5].state = 7;
- }
- }
- break;
- case 6:
- if (time_after(jiffies, j->cadence_f[5].off3dot)) {
- if(ixjdebug & 0x0004) {
- printk("Ringing cadence state = %d - %ld\n", j->cadence_f[5].state, jiffies);
- }
- j->cadence_f[5].state = 7;
- }
- break;
- case 7:
- if(ixjdebug & 0x0004) {
- printk("Ringing cadence state = %d - %ld\n", j->cadence_f[5].state, jiffies);
- }
- j->flags.cidring = 1;
- j->cadence_f[5].state = 0;
- break;
- }
- if (j->flags.cidring && !j->flags.cidsent) {
- j->flags.cidsent = 1;
- if(j->fskdcnt) {
- SLIC_SetState(PLD_SLIC_STATE_OHT, j);
- ixj_pre_cid(j);
- }
- j->flags.cidring = 0;
- }
- clear_bit(board, &j->busyflags);
- ixj_add_timer(j);
- return;
- } else {
- if (time_after(jiffies, j->ring_cadence_jif + (hertz / 2))) {
- if (j->flags.cidring && !j->flags.cidsent) {
- j->flags.cidsent = 1;
- if(j->fskdcnt) {
- SLIC_SetState(PLD_SLIC_STATE_OHT, j);
- ixj_pre_cid(j);
- }
- j->flags.cidring = 0;
- }
- j->ring_cadence_t--;
- if (j->ring_cadence_t == -1)
- j->ring_cadence_t = 15;
- j->ring_cadence_jif = jiffies;
-
- if (j->ring_cadence & 1 << j->ring_cadence_t) {
- if(j->flags.cidsent && j->cadence_f[5].en_filter)
- j->flags.firstring = 1;
- else
- ixj_ring_on(j);
- } else {
- ixj_ring_off(j);
- if(!j->flags.cidsent)
- j->flags.cidring = 1;
- }
- }
- clear_bit(board, &j->busyflags);
- ixj_add_timer(j);
- return;
- }
- }
- if (!j->flags.ringing) {
- if (j->hookstate) { /* & 1) { */
- if (j->dsp.low != 0x20 &&
- SLIC_GetState(j) != PLD_SLIC_STATE_ACTIVE) {
- SLIC_SetState(PLD_SLIC_STATE_ACTIVE, j);
- }
- LineMonitor(j);
- read_filters(j);
- ixj_WriteDSPCommand(0x511B, j);
- j->proc_load = j->ssr.high << 8 | j->ssr.low;
- if (!j->m_hook && (j->hookstate & 1)) {
- j->m_hook = j->ex.bits.hookstate = 1;
- ixj_kill_fasync(j, SIG_HOOKSTATE, POLL_IN);
- }
- } else {
- if (j->ex.bits.dtmf_ready) {
- j->dtmf_wp = j->dtmf_rp = j->ex.bits.dtmf_ready = 0;
- }
- if (j->m_hook) {
- j->m_hook = 0;
- j->ex.bits.hookstate = 1;
- ixj_kill_fasync(j, SIG_HOOKSTATE, POLL_IN);
- }
- }
- }
- if (j->cardtype == QTI_LINEJACK && !j->flags.pstncheck && j->flags.pstn_present) {
- ixj_pstn_state(j);
- }
- if (j->ex.bytes) {
- wake_up_interruptible(&j->poll_q); /* Wake any blocked selects */
- }
- clear_bit(board, &j->busyflags);
- }
- ixj_add_timer(j);
-}
-
-static int ixj_status_wait(IXJ *j)
-{
- unsigned long jif;
-
- jif = jiffies + ((60 * hertz) / 100);
- while (!IsStatusReady(j)) {
- ixj_perfmon(j->statuswait);
- if (time_after(jiffies, jif)) {
- ixj_perfmon(j->statuswaitfail);
- return -1;
- }
- }
- return 0;
-}
-
-static int ixj_PCcontrol_wait(IXJ *j)
-{
- unsigned long jif;
-
- jif = jiffies + ((60 * hertz) / 100);
- while (!IsPCControlReady(j)) {
- ixj_perfmon(j->pcontrolwait);
- if (time_after(jiffies, jif)) {
- ixj_perfmon(j->pcontrolwaitfail);
- return -1;
- }
- }
- return 0;
-}
-
-static int ixj_WriteDSPCommand(unsigned short cmd, IXJ *j)
-{
- BYTES bytes;
- unsigned long jif;
-
- atomic_inc(&j->DSPWrite);
- if(atomic_read(&j->DSPWrite) > 1) {
- printk("IXJ %d DSP write overlap attempting command 0x%4.4x\n", j->board, cmd);
- return -1;
- }
- bytes.high = (cmd & 0xFF00) >> 8;
- bytes.low = cmd & 0x00FF;
- jif = jiffies + ((60 * hertz) / 100);
- while (!IsControlReady(j)) {
- ixj_perfmon(j->iscontrolready);
- if (time_after(jiffies, jif)) {
- ixj_perfmon(j->iscontrolreadyfail);
- atomic_dec(&j->DSPWrite);
- if(atomic_read(&j->DSPWrite) > 0) {
- printk("IXJ %d DSP overlaped command 0x%4.4x during control ready failure.\n", j->board, cmd);
- while(atomic_read(&j->DSPWrite) > 0) {
- atomic_dec(&j->DSPWrite);
- }
- }
- return -1;
- }
- }
- outb(bytes.low, j->DSPbase + 6);
- outb(bytes.high, j->DSPbase + 7);
-
- if (ixj_status_wait(j)) {
- j->ssr.low = 0xFF;
- j->ssr.high = 0xFF;
- atomic_dec(&j->DSPWrite);
- if(atomic_read(&j->DSPWrite) > 0) {
- printk("IXJ %d DSP overlaped command 0x%4.4x during status wait failure.\n", j->board, cmd);
- while(atomic_read(&j->DSPWrite) > 0) {
- atomic_dec(&j->DSPWrite);
- }
- }
- return -1;
- }
-/* Read Software Status Register */
- j->ssr.low = inb_p(j->DSPbase + 2);
- j->ssr.high = inb_p(j->DSPbase + 3);
- atomic_dec(&j->DSPWrite);
- if(atomic_read(&j->DSPWrite) > 0) {
- printk("IXJ %d DSP overlaped command 0x%4.4x\n", j->board, cmd);
- while(atomic_read(&j->DSPWrite) > 0) {
- atomic_dec(&j->DSPWrite);
- }
- }
- return 0;
-}
-
-/***************************************************************************
-*
-* General Purpose IO Register read routine
-*
-***************************************************************************/
-static inline int ixj_gpio_read(IXJ *j)
-{
- if (ixj_WriteDSPCommand(0x5143, j))
- return -1;
-
- j->gpio.bytes.low = j->ssr.low;
- j->gpio.bytes.high = j->ssr.high;
-
- return 0;
-}
-
-static inline void LED_SetState(int state, IXJ *j)
-{
- if (j->cardtype == QTI_LINEJACK) {
- j->pld_scrw.bits.led1 = state & 0x1 ? 1 : 0;
- j->pld_scrw.bits.led2 = state & 0x2 ? 1 : 0;
- j->pld_scrw.bits.led3 = state & 0x4 ? 1 : 0;
- j->pld_scrw.bits.led4 = state & 0x8 ? 1 : 0;
-
- outb(j->pld_scrw.byte, j->XILINXbase);
- }
-}
-
-/*********************************************************************
-* GPIO Pins are configured as follows on the Quicknet Internet
-* PhoneJACK Telephony Cards
-*
-* POTS Select GPIO_6=0 GPIO_7=0
-* Mic/Speaker Select GPIO_6=0 GPIO_7=1
-* Handset Select GPIO_6=1 GPIO_7=0
-*
-* SLIC Active GPIO_1=0 GPIO_2=1 GPIO_5=0
-* SLIC Ringing GPIO_1=1 GPIO_2=1 GPIO_5=0
-* SLIC Open Circuit GPIO_1=0 GPIO_2=0 GPIO_5=0
-*
-* Hook Switch changes reported on GPIO_3
-*********************************************************************/
-static int ixj_set_port(IXJ *j, int arg)
-{
- if (j->cardtype == QTI_PHONEJACK_LITE) {
- if (arg != PORT_POTS)
- return 10;
- else
- return 0;
- }
- switch (arg) {
- case PORT_POTS:
- j->port = PORT_POTS;
- switch (j->cardtype) {
- case QTI_PHONECARD:
- if (j->flags.pcmciasct == 1)
- SLIC_SetState(PLD_SLIC_STATE_ACTIVE, j);
- else
- return 11;
- break;
- case QTI_PHONEJACK_PCI:
- j->pld_slicw.pcib.mic = 0;
- j->pld_slicw.pcib.spk = 0;
- outb(j->pld_slicw.byte, j->XILINXbase + 0x01);
- break;
- case QTI_LINEJACK:
- ixj_set_pots(j, 0); /* Disconnect POTS/PSTN relay */
- if (ixj_WriteDSPCommand(0xC528, j)) /* Write CODEC config to
- Software Control Register */
- return 2;
- j->pld_scrw.bits.daafsyncen = 0; /* Turn off DAA Frame Sync */
-
- outb(j->pld_scrw.byte, j->XILINXbase);
- j->pld_clock.byte = 0;
- outb(j->pld_clock.byte, j->XILINXbase + 0x04);
- j->pld_slicw.bits.rly1 = 1;
- j->pld_slicw.bits.spken = 0;
- outb(j->pld_slicw.byte, j->XILINXbase + 0x01);
- ixj_mixer(0x1200, j); /* Turn Off MIC switch on mixer left */
- ixj_mixer(0x1401, j); /* Turn On Mono1 switch on mixer left */
- ixj_mixer(0x1300, j); /* Turn Off MIC switch on mixer right */
- ixj_mixer(0x1501, j); /* Turn On Mono1 switch on mixer right */
- ixj_mixer(0x0E80, j); /*Mic mute */
- ixj_mixer(0x0F00, j); /* Set mono out (SLIC) to 0dB */
- ixj_mixer(0x0080, j); /* Mute Master Left volume */
- ixj_mixer(0x0180, j); /* Mute Master Right volume */
- SLIC_SetState(PLD_SLIC_STATE_STANDBY, j);
-/* SLIC_SetState(PLD_SLIC_STATE_ACTIVE, j); */
- break;
- case QTI_PHONEJACK:
- j->gpio.bytes.high = 0x0B;
- j->gpio.bits.gpio6 = 0;
- j->gpio.bits.gpio7 = 0;
- ixj_WriteDSPCommand(j->gpio.word, j);
- break;
- }
- break;
- case PORT_PSTN:
- if (j->cardtype == QTI_LINEJACK) {
- ixj_WriteDSPCommand(0xC534, j); /* Write CODEC config to Software Control Register */
-
- j->pld_slicw.bits.rly3 = 0;
- j->pld_slicw.bits.rly1 = 1;
- j->pld_slicw.bits.spken = 0;
- outb(j->pld_slicw.byte, j->XILINXbase + 0x01);
- j->port = PORT_PSTN;
- } else {
- return 4;
- }
- break;
- case PORT_SPEAKER:
- j->port = PORT_SPEAKER;
- switch (j->cardtype) {
- case QTI_PHONECARD:
- if (j->flags.pcmciasct) {
- SLIC_SetState(PLD_SLIC_STATE_OC, j);
- }
- break;
- case QTI_PHONEJACK_PCI:
- j->pld_slicw.pcib.mic = 1;
- j->pld_slicw.pcib.spk = 1;
- outb(j->pld_slicw.byte, j->XILINXbase + 0x01);
- break;
- case QTI_LINEJACK:
- ixj_set_pots(j, 0); /* Disconnect POTS/PSTN relay */
- if (ixj_WriteDSPCommand(0xC528, j)) /* Write CODEC config to
- Software Control Register */
- return 2;
- j->pld_scrw.bits.daafsyncen = 0; /* Turn off DAA Frame Sync */
-
- outb(j->pld_scrw.byte, j->XILINXbase);
- j->pld_clock.byte = 0;
- outb(j->pld_clock.byte, j->XILINXbase + 0x04);
- j->pld_slicw.bits.rly1 = 1;
- j->pld_slicw.bits.spken = 1;
- outb(j->pld_slicw.byte, j->XILINXbase + 0x01);
- ixj_mixer(0x1201, j); /* Turn On MIC switch on mixer left */
- ixj_mixer(0x1400, j); /* Turn Off Mono1 switch on mixer left */
- ixj_mixer(0x1301, j); /* Turn On MIC switch on mixer right */
- ixj_mixer(0x1500, j); /* Turn Off Mono1 switch on mixer right */
- ixj_mixer(0x0E06, j); /*Mic un-mute 0dB */
- ixj_mixer(0x0F80, j); /* Mute mono out (SLIC) */
- ixj_mixer(0x0000, j); /* Set Master Left volume to 0dB */
- ixj_mixer(0x0100, j); /* Set Master Right volume to 0dB */
- break;
- case QTI_PHONEJACK:
- j->gpio.bytes.high = 0x0B;
- j->gpio.bits.gpio6 = 0;
- j->gpio.bits.gpio7 = 1;
- ixj_WriteDSPCommand(j->gpio.word, j);
- break;
- }
- break;
- case PORT_HANDSET:
- if (j->cardtype != QTI_PHONEJACK) {
- return 5;
- } else {
- j->gpio.bytes.high = 0x0B;
- j->gpio.bits.gpio6 = 1;
- j->gpio.bits.gpio7 = 0;
- ixj_WriteDSPCommand(j->gpio.word, j);
- j->port = PORT_HANDSET;
- }
- break;
- default:
- return 6;
- break;
- }
- return 0;
-}
-
-static int ixj_set_pots(IXJ *j, int arg)
-{
- if (j->cardtype == QTI_LINEJACK) {
- if (arg) {
- if (j->port == PORT_PSTN) {
- j->pld_slicw.bits.rly1 = 0;
- outb(j->pld_slicw.byte, j->XILINXbase + 0x01);
- j->flags.pots_pstn = 1;
- return 1;
- } else {
- j->flags.pots_pstn = 0;
- return 0;
- }
- } else {
- j->pld_slicw.bits.rly1 = 1;
- outb(j->pld_slicw.byte, j->XILINXbase + 0x01);
- j->flags.pots_pstn = 0;
- return 1;
- }
- } else {
- return 0;
- }
-}
-
-static void ixj_ring_on(IXJ *j)
-{
- if (j->dsp.low == 0x20) /* Internet PhoneJACK */
- {
- if (ixjdebug & 0x0004)
- printk(KERN_INFO "IXJ Ring On /dev/phone%d\n", j->board);
-
- j->gpio.bytes.high = 0x0B;
- j->gpio.bytes.low = 0x00;
- j->gpio.bits.gpio1 = 1;
- j->gpio.bits.gpio2 = 1;
- j->gpio.bits.gpio5 = 0;
- ixj_WriteDSPCommand(j->gpio.word, j); /* send the ring signal */
- } else /* Internet LineJACK, Internet PhoneJACK Lite or Internet PhoneJACK PCI */
- {
- if (ixjdebug & 0x0004)
- printk(KERN_INFO "IXJ Ring On /dev/phone%d\n", j->board);
-
- SLIC_SetState(PLD_SLIC_STATE_RINGING, j);
- }
-}
-
-static int ixj_siadc(IXJ *j, int val)
-{
- if(j->cardtype == QTI_PHONECARD){
- if(j->flags.pcmciascp){
- if(val == -1)
- return j->siadc.bits.rxg;
-
- if(val < 0 || val > 0x1F)
- return -1;
-
- j->siadc.bits.hom = 0; /* Handset Out Mute */
- j->siadc.bits.lom = 0; /* Line Out Mute */
- j->siadc.bits.rxg = val; /*(0xC000 - 0x41C8) / 0x4EF; RX PGA Gain */
- j->psccr.bits.addr = 6; /* R/W Smart Cable Register Address */
- j->psccr.bits.rw = 0; /* Read / Write flag */
- j->psccr.bits.dev = 0;
- outb(j->siadc.byte, j->XILINXbase + 0x00);
- outb(j->psccr.byte, j->XILINXbase + 0x01);
- ixj_PCcontrol_wait(j);
- return j->siadc.bits.rxg;
- }
- }
- return -1;
-}
-
-static int ixj_sidac(IXJ *j, int val)
-{
- if(j->cardtype == QTI_PHONECARD){
- if(j->flags.pcmciascp){
- if(val == -1)
- return j->sidac.bits.txg;
-
- if(val < 0 || val > 0x1F)
- return -1;
-
- j->sidac.bits.srm = 1; /* Speaker Right Mute */
- j->sidac.bits.slm = 1; /* Speaker Left Mute */
- j->sidac.bits.txg = val; /* (0xC000 - 0x45E4) / 0x5D3; TX PGA Gain */
- j->psccr.bits.addr = 7; /* R/W Smart Cable Register Address */
- j->psccr.bits.rw = 0; /* Read / Write flag */
- j->psccr.bits.dev = 0;
- outb(j->sidac.byte, j->XILINXbase + 0x00);
- outb(j->psccr.byte, j->XILINXbase + 0x01);
- ixj_PCcontrol_wait(j);
- return j->sidac.bits.txg;
- }
- }
- return -1;
-}
-
-static int ixj_pcmcia_cable_check(IXJ *j)
-{
- j->pccr1.byte = inb_p(j->XILINXbase + 0x03);
- if (!j->flags.pcmciastate) {
- j->pccr2.byte = inb_p(j->XILINXbase + 0x02);
- if (j->pccr1.bits.drf || j->pccr2.bits.rstc) {
- j->flags.pcmciastate = 4;
- return 0;
- }
- if (j->pccr1.bits.ed) {
- j->pccr1.bits.ed = 0;
- j->psccr.bits.dev = 3;
- j->psccr.bits.rw = 1;
- outw_p(j->psccr.byte << 8, j->XILINXbase + 0x00);
- ixj_PCcontrol_wait(j);
- j->pslic.byte = inw_p(j->XILINXbase + 0x00) & 0xFF;
- j->pslic.bits.led2 = j->pslic.bits.det ? 1 : 0;
- j->psccr.bits.dev = 3;
- j->psccr.bits.rw = 0;
- outw_p(j->psccr.byte << 8 | j->pslic.byte, j->XILINXbase + 0x00);
- ixj_PCcontrol_wait(j);
- return j->pslic.bits.led2 ? 1 : 0;
- } else if (j->flags.pcmciasct) {
- return j->r_hook;
- } else {
- return 1;
- }
- } else if (j->flags.pcmciastate == 4) {
- if (!j->pccr1.bits.drf) {
- j->flags.pcmciastate = 3;
- }
- return 0;
- } else if (j->flags.pcmciastate == 3) {
- j->pccr2.bits.pwr = 0;
- j->pccr2.bits.rstc = 1;
- outb(j->pccr2.byte, j->XILINXbase + 0x02);
- j->checkwait = jiffies + (hertz * 2);
- j->flags.incheck = 1;
- j->flags.pcmciastate = 2;
- return 0;
- } else if (j->flags.pcmciastate == 2) {
- if (j->flags.incheck) {
- if (time_before(jiffies, j->checkwait)) {
- return 0;
- } else {
- j->flags.incheck = 0;
- }
- }
- j->pccr2.bits.pwr = 0;
- j->pccr2.bits.rstc = 0;
- outb_p(j->pccr2.byte, j->XILINXbase + 0x02);
- j->flags.pcmciastate = 1;
- return 0;
- } else if (j->flags.pcmciastate == 1) {
- j->flags.pcmciastate = 0;
- if (!j->pccr1.bits.drf) {
- j->psccr.bits.dev = 3;
- j->psccr.bits.rw = 1;
- outb_p(j->psccr.byte, j->XILINXbase + 0x01);
- ixj_PCcontrol_wait(j);
- j->flags.pcmciascp = 1; /* Set Cable Present Flag */
-
- j->flags.pcmciasct = (inw_p(j->XILINXbase + 0x00) >> 8) & 0x03; /* Get Cable Type */
-
- if (j->flags.pcmciasct == 3) {
- j->flags.pcmciastate = 4;
- return 0;
- } else if (j->flags.pcmciasct == 0) {
- j->pccr2.bits.pwr = 1;
- j->pccr2.bits.rstc = 0;
- outb_p(j->pccr2.byte, j->XILINXbase + 0x02);
- j->port = PORT_SPEAKER;
- } else {
- j->port = PORT_POTS;
- }
- j->sic1.bits.cpd = 0; /* Chip Power Down */
- j->sic1.bits.mpd = 0; /* MIC Bias Power Down */
- j->sic1.bits.hpd = 0; /* Handset Bias Power Down */
- j->sic1.bits.lpd = 0; /* Line Bias Power Down */
- j->sic1.bits.spd = 1; /* Speaker Drive Power Down */
- j->psccr.bits.addr = 1; /* R/W Smart Cable Register Address */
- j->psccr.bits.rw = 0; /* Read / Write flag */
- j->psccr.bits.dev = 0;
- outb(j->sic1.byte, j->XILINXbase + 0x00);
- outb(j->psccr.byte, j->XILINXbase + 0x01);
- ixj_PCcontrol_wait(j);
-
- j->sic2.bits.al = 0; /* Analog Loopback DAC analog -> ADC analog */
- j->sic2.bits.dl2 = 0; /* Digital Loopback DAC -> ADC one bit */
- j->sic2.bits.dl1 = 0; /* Digital Loopback ADC -> DAC one bit */
- j->sic2.bits.pll = 0; /* 1 = div 10, 0 = div 5 */
- j->sic2.bits.hpd = 0; /* HPF disable */
- j->psccr.bits.addr = 2; /* R/W Smart Cable Register Address */
- j->psccr.bits.rw = 0; /* Read / Write flag */
- j->psccr.bits.dev = 0;
- outb(j->sic2.byte, j->XILINXbase + 0x00);
- outb(j->psccr.byte, j->XILINXbase + 0x01);
- ixj_PCcontrol_wait(j);
-
- j->psccr.bits.addr = 3; /* R/W Smart Cable Register Address */
- j->psccr.bits.rw = 0; /* Read / Write flag */
- j->psccr.bits.dev = 0;
- outb(0x00, j->XILINXbase + 0x00); /* PLL Divide N1 */
- outb(j->psccr.byte, j->XILINXbase + 0x01);
- ixj_PCcontrol_wait(j);
-
- j->psccr.bits.addr = 4; /* R/W Smart Cable Register Address */
- j->psccr.bits.rw = 0; /* Read / Write flag */
- j->psccr.bits.dev = 0;
- outb(0x09, j->XILINXbase + 0x00); /* PLL Multiply M1 */
- outb(j->psccr.byte, j->XILINXbase + 0x01);
- ixj_PCcontrol_wait(j);
-
- j->sirxg.bits.lig = 1; /* Line In Gain */
- j->sirxg.bits.lim = 1; /* Line In Mute */
- j->sirxg.bits.mcg = 0; /* MIC In Gain was 3 */
- j->sirxg.bits.mcm = 0; /* MIC In Mute */
- j->sirxg.bits.him = 0; /* Handset In Mute */
- j->sirxg.bits.iir = 1; /* IIR */
- j->psccr.bits.addr = 5; /* R/W Smart Cable Register Address */
- j->psccr.bits.rw = 0; /* Read / Write flag */
- j->psccr.bits.dev = 0;
- outb(j->sirxg.byte, j->XILINXbase + 0x00);
- outb(j->psccr.byte, j->XILINXbase + 0x01);
- ixj_PCcontrol_wait(j);
-
- ixj_siadc(j, 0x17);
- ixj_sidac(j, 0x1D);
-
- j->siaatt.bits.sot = 0;
- j->psccr.bits.addr = 9; /* R/W Smart Cable Register Address */
- j->psccr.bits.rw = 0; /* Read / Write flag */
- j->psccr.bits.dev = 0;
- outb(j->siaatt.byte, j->XILINXbase + 0x00);
- outb(j->psccr.byte, j->XILINXbase + 0x01);
- ixj_PCcontrol_wait(j);
-
- if (j->flags.pcmciasct == 1 && !j->readers && !j->writers) {
- j->psccr.byte = j->pslic.byte = 0;
- j->pslic.bits.powerdown = 1;
- j->psccr.bits.dev = 3;
- j->psccr.bits.rw = 0;
- outw_p(j->psccr.byte << 8 | j->pslic.byte, j->XILINXbase + 0x00);
- ixj_PCcontrol_wait(j);
- }
- }
- return 0;
- } else {
- j->flags.pcmciascp = 0;
- return 0;
- }
- return 0;
-}
-
-static int ixj_hookstate(IXJ *j)
-{
- int fOffHook = 0;
-
- switch (j->cardtype) {
- case QTI_PHONEJACK:
- ixj_gpio_read(j);
- fOffHook = j->gpio.bits.gpio3read ? 1 : 0;
- break;
- case QTI_LINEJACK:
- case QTI_PHONEJACK_LITE:
- case QTI_PHONEJACK_PCI:
- SLIC_GetState(j);
- if(j->cardtype == QTI_LINEJACK && j->flags.pots_pstn == 1 && (j->readers || j->writers)) {
- fOffHook = j->pld_slicr.bits.potspstn ? 1 : 0;
- if(fOffHook != j->p_hook) {
- if(!j->checkwait) {
- j->checkwait = jiffies;
- }
- if(time_before(jiffies, j->checkwait + 2)) {
- fOffHook ^= 1;
- } else {
- j->checkwait = 0;
- }
- j->p_hook = fOffHook;
- printk("IXJ : /dev/phone%d pots-pstn hookstate check %d at %ld\n", j->board, fOffHook, jiffies);
- }
- } else {
- if (j->pld_slicr.bits.state == PLD_SLIC_STATE_ACTIVE ||
- j->pld_slicr.bits.state == PLD_SLIC_STATE_STANDBY) {
- if (j->flags.ringing || j->flags.cringing) {
- if (!in_interrupt()) {
- msleep(20);
- }
- SLIC_GetState(j);
- if (j->pld_slicr.bits.state == PLD_SLIC_STATE_RINGING) {
- ixj_ring_on(j);
- }
- }
- if (j->cardtype == QTI_PHONEJACK_PCI) {
- j->pld_scrr.byte = inb_p(j->XILINXbase);
- fOffHook = j->pld_scrr.pcib.det ? 1 : 0;
- } else
- fOffHook = j->pld_slicr.bits.det ? 1 : 0;
- }
- }
- break;
- case QTI_PHONECARD:
- fOffHook = ixj_pcmcia_cable_check(j);
- break;
- }
- if (j->r_hook != fOffHook) {
- j->r_hook = fOffHook;
- if (j->port == PORT_SPEAKER || j->port == PORT_HANDSET) { // || (j->port == PORT_PSTN && j->flags.pots_pstn == 0)) {
- j->ex.bits.hookstate = 1;
- ixj_kill_fasync(j, SIG_HOOKSTATE, POLL_IN);
- } else if (!fOffHook) {
- j->flash_end = jiffies + ((60 * hertz) / 100);
- }
- }
- if (fOffHook) {
- if(time_before(jiffies, j->flash_end)) {
- j->ex.bits.flash = 1;
- j->flash_end = 0;
- ixj_kill_fasync(j, SIG_FLASH, POLL_IN);
- }
- } else {
- if(time_before(jiffies, j->flash_end)) {
- fOffHook = 1;
- }
- }
-
- if (j->port == PORT_PSTN && j->daa_mode == SOP_PU_CONVERSATION)
- fOffHook |= 2;
-
- if (j->port == PORT_SPEAKER) {
- if(j->cardtype == QTI_PHONECARD) {
- if(j->flags.pcmciascp && j->flags.pcmciasct) {
- fOffHook |= 2;
- }
- } else {
- fOffHook |= 2;
- }
- }
-
- if (j->port == PORT_HANDSET)
- fOffHook |= 2;
-
- return fOffHook;
-}
-
-static void ixj_ring_off(IXJ *j)
-{
- if (j->dsp.low == 0x20) /* Internet PhoneJACK */
- {
- if (ixjdebug & 0x0004)
- printk(KERN_INFO "IXJ Ring Off\n");
- j->gpio.bytes.high = 0x0B;
- j->gpio.bytes.low = 0x00;
- j->gpio.bits.gpio1 = 0;
- j->gpio.bits.gpio2 = 1;
- j->gpio.bits.gpio5 = 0;
- ixj_WriteDSPCommand(j->gpio.word, j);
- } else /* Internet LineJACK */
- {
- if (ixjdebug & 0x0004)
- printk(KERN_INFO "IXJ Ring Off\n");
-
- if(!j->flags.cidplay)
- SLIC_SetState(PLD_SLIC_STATE_STANDBY, j);
-
- SLIC_GetState(j);
- }
-}
-
-static void ixj_ring_start(IXJ *j)
-{
- j->flags.cringing = 1;
- if (ixjdebug & 0x0004)
- printk(KERN_INFO "IXJ Cadence Ringing Start /dev/phone%d\n", j->board);
- if (ixj_hookstate(j) & 1) {
- if (j->port == PORT_POTS)
- ixj_ring_off(j);
- j->flags.cringing = 0;
- if (ixjdebug & 0x0004)
- printk(KERN_INFO "IXJ Cadence Ringing Stopped /dev/phone%d off hook\n", j->board);
- } else if(j->cadence_f[5].enable && (!j->cadence_f[5].en_filter)) {
- j->ring_cadence_jif = jiffies;
- j->flags.cidsent = j->flags.cidring = 0;
- j->cadence_f[5].state = 0;
- if(j->cadence_f[5].on1)
- ixj_ring_on(j);
- } else {
- j->ring_cadence_jif = jiffies;
- j->ring_cadence_t = 15;
- if (j->ring_cadence & 1 << j->ring_cadence_t) {
- ixj_ring_on(j);
- } else {
- ixj_ring_off(j);
- }
- j->flags.cidsent = j->flags.cidring = j->flags.firstring = 0;
- }
-}
-
-static int ixj_ring(IXJ *j)
-{
- char cntr;
- unsigned long jif;
-
- j->flags.ringing = 1;
- if (ixj_hookstate(j) & 1) {
- ixj_ring_off(j);
- j->flags.ringing = 0;
- return 1;
- }
- for (cntr = 0; cntr < j->maxrings; cntr++) {
- jif = jiffies + (1 * hertz);
- ixj_ring_on(j);
- while (time_before(jiffies, jif)) {
- if (ixj_hookstate(j) & 1) {
- ixj_ring_off(j);
- j->flags.ringing = 0;
- return 1;
- }
- schedule_timeout_interruptible(1);
- if (signal_pending(current))
- break;
- }
- jif = jiffies + (3 * hertz);
- ixj_ring_off(j);
- while (time_before(jiffies, jif)) {
- if (ixj_hookstate(j) & 1) {
- msleep(10);
- if (ixj_hookstate(j) & 1) {
- j->flags.ringing = 0;
- return 1;
- }
- }
- schedule_timeout_interruptible(1);
- if (signal_pending(current))
- break;
- }
- }
- ixj_ring_off(j);
- j->flags.ringing = 0;
- return 0;
-}
-
-static int ixj_open(struct phone_device *p, struct file *file_p)
-{
- IXJ *j = get_ixj(p->board);
- file_p->private_data = j;
-
- if (!j->DSPbase)
- return -ENODEV;
-
- if (file_p->f_mode & FMODE_READ) {
- if(!j->readers) {
- j->readers++;
- } else {
- return -EBUSY;
- }
- }
-
- if (file_p->f_mode & FMODE_WRITE) {
- if(!j->writers) {
- j->writers++;
- } else {
- if (file_p->f_mode & FMODE_READ){
- j->readers--;
- }
- return -EBUSY;
- }
- }
-
- if (j->cardtype == QTI_PHONECARD) {
- j->pslic.bits.powerdown = 0;
- j->psccr.bits.dev = 3;
- j->psccr.bits.rw = 0;
- outw_p(j->psccr.byte << 8 | j->pslic.byte, j->XILINXbase + 0x00);
- ixj_PCcontrol_wait(j);
- }
-
- j->flags.cidplay = 0;
- j->flags.cidcw_ack = 0;
-
- if (ixjdebug & 0x0002)
- printk(KERN_INFO "Opening board %d\n", p->board);
-
- j->framesread = j->frameswritten = 0;
- return 0;
-}
-
-static int ixj_release(struct inode *inode, struct file *file_p)
-{
- IXJ_TONE ti;
- int cnt;
- IXJ *j = file_p->private_data;
- int board = j->p.board;
-
- /*
- * Set up locks to ensure that only one process is talking to the DSP at a time.
- * This is necessary to keep the DSP from locking up.
- */
- while(test_and_set_bit(board, (void *)&j->busyflags) != 0)
- schedule_timeout_interruptible(1);
- if (ixjdebug & 0x0002)
- printk(KERN_INFO "Closing board %d\n", NUM(inode));
-
- if (j->cardtype == QTI_PHONECARD)
- ixj_set_port(j, PORT_SPEAKER);
- else
- ixj_set_port(j, PORT_POTS);
-
- aec_stop(j);
- ixj_play_stop(j);
- ixj_record_stop(j);
- set_play_volume(j, 0x100);
- set_rec_volume(j, 0x100);
- ixj_ring_off(j);
-
- /* Restore the tone table to default settings. */
- ti.tone_index = 10;
- ti.gain0 = 1;
- ti.freq0 = hz941;
- ti.gain1 = 0;
- ti.freq1 = hz1209;
- ixj_init_tone(j, &ti);
- ti.tone_index = 11;
- ti.gain0 = 1;
- ti.freq0 = hz941;
- ti.gain1 = 0;
- ti.freq1 = hz1336;
- ixj_init_tone(j, &ti);
- ti.tone_index = 12;
- ti.gain0 = 1;
- ti.freq0 = hz941;
- ti.gain1 = 0;
- ti.freq1 = hz1477;
- ixj_init_tone(j, &ti);
- ti.tone_index = 13;
- ti.gain0 = 1;
- ti.freq0 = hz800;
- ti.gain1 = 0;
- ti.freq1 = 0;
- ixj_init_tone(j, &ti);
- ti.tone_index = 14;
- ti.gain0 = 1;
- ti.freq0 = hz1000;
- ti.gain1 = 0;
- ti.freq1 = 0;
- ixj_init_tone(j, &ti);
- ti.tone_index = 15;
- ti.gain0 = 1;
- ti.freq0 = hz1250;
- ti.gain1 = 0;
- ti.freq1 = 0;
- ixj_init_tone(j, &ti);
- ti.tone_index = 16;
- ti.gain0 = 1;
- ti.freq0 = hz950;
- ti.gain1 = 0;
- ti.freq1 = 0;
- ixj_init_tone(j, &ti);
- ti.tone_index = 17;
- ti.gain0 = 1;
- ti.freq0 = hz1100;
- ti.gain1 = 0;
- ti.freq1 = 0;
- ixj_init_tone(j, &ti);
- ti.tone_index = 18;
- ti.gain0 = 1;
- ti.freq0 = hz1400;
- ti.gain1 = 0;
- ti.freq1 = 0;
- ixj_init_tone(j, &ti);
- ti.tone_index = 19;
- ti.gain0 = 1;
- ti.freq0 = hz1500;
- ti.gain1 = 0;
- ti.freq1 = 0;
- ixj_init_tone(j, &ti);
- ti.tone_index = 20;
- ti.gain0 = 1;
- ti.freq0 = hz1600;
- ti.gain1 = 0;
- ti.freq1 = 0;
- ixj_init_tone(j, &ti);
- ti.tone_index = 21;
- ti.gain0 = 1;
- ti.freq0 = hz1800;
- ti.gain1 = 0;
- ti.freq1 = 0;
- ixj_init_tone(j, &ti);
- ti.tone_index = 22;
- ti.gain0 = 1;
- ti.freq0 = hz2100;
- ti.gain1 = 0;
- ti.freq1 = 0;
- ixj_init_tone(j, &ti);
- ti.tone_index = 23;
- ti.gain0 = 1;
- ti.freq0 = hz1300;
- ti.gain1 = 0;
- ti.freq1 = 0;
- ixj_init_tone(j, &ti);
- ti.tone_index = 24;
- ti.gain0 = 1;
- ti.freq0 = hz2450;
- ti.gain1 = 0;
- ti.freq1 = 0;
- ixj_init_tone(j, &ti);
- ti.tone_index = 25;
- ti.gain0 = 1;
- ti.freq0 = hz350;
- ti.gain1 = 0;
- ti.freq1 = hz440;
- ixj_init_tone(j, &ti);
- ti.tone_index = 26;
- ti.gain0 = 1;
- ti.freq0 = hz440;
- ti.gain1 = 0;
- ti.freq1 = hz480;
- ixj_init_tone(j, &ti);
- ti.tone_index = 27;
- ti.gain0 = 1;
- ti.freq0 = hz480;
- ti.gain1 = 0;
- ti.freq1 = hz620;
- ixj_init_tone(j, &ti);
-
- set_rec_depth(j, 2); /* Set Record Channel Limit to 2 frames */
-
- set_play_depth(j, 2); /* Set Playback Channel Limit to 2 frames */
-
- j->ex.bits.dtmf_ready = 0;
- j->dtmf_state = 0;
- j->dtmf_wp = j->dtmf_rp = 0;
- j->rec_mode = j->play_mode = -1;
- j->flags.ringing = 0;
- j->maxrings = MAXRINGS;
- j->ring_cadence = USA_RING_CADENCE;
- if(j->cadence_f[5].enable) {
- j->cadence_f[5].enable = j->cadence_f[5].en_filter = j->cadence_f[5].state = 0;
- }
- j->drybuffer = 0;
- j->winktime = 320;
- j->flags.dtmf_oob = 0;
- for (cnt = 0; cnt < 4; cnt++)
- j->cadence_f[cnt].enable = 0;
-
- idle(j);
-
- if(j->cardtype == QTI_PHONECARD) {
- SLIC_SetState(PLD_SLIC_STATE_OC, j);
- }
-
- if (file_p->f_mode & FMODE_READ)
- j->readers--;
- if (file_p->f_mode & FMODE_WRITE)
- j->writers--;
-
- if (j->read_buffer && !j->readers) {
- kfree(j->read_buffer);
- j->read_buffer = NULL;
- j->read_buffer_size = 0;
- }
- if (j->write_buffer && !j->writers) {
- kfree(j->write_buffer);
- j->write_buffer = NULL;
- j->write_buffer_size = 0;
- }
- j->rec_codec = j->play_codec = 0;
- j->rec_frame_size = j->play_frame_size = 0;
- j->flags.cidsent = j->flags.cidring = 0;
-
- if(j->cardtype == QTI_LINEJACK && !j->readers && !j->writers) {
- ixj_set_port(j, PORT_PSTN);
- daa_set_mode(j, SOP_PU_SLEEP);
- ixj_set_pots(j, 1);
- }
- ixj_WriteDSPCommand(0x0FE3, j); /* Put the DSP in 1/5 power mode. */
-
- /* Set up the default signals for events */
- for (cnt = 0; cnt < 35; cnt++)
- j->ixj_signals[cnt] = SIGIO;
-
- /* Set the excetion signal enable flags */
- j->ex_sig.bits.dtmf_ready = j->ex_sig.bits.hookstate = j->ex_sig.bits.flash = j->ex_sig.bits.pstn_ring =
- j->ex_sig.bits.caller_id = j->ex_sig.bits.pstn_wink = j->ex_sig.bits.f0 = j->ex_sig.bits.f1 = j->ex_sig.bits.f2 =
- j->ex_sig.bits.f3 = j->ex_sig.bits.fc0 = j->ex_sig.bits.fc1 = j->ex_sig.bits.fc2 = j->ex_sig.bits.fc3 = 1;
-
- file_p->private_data = NULL;
- clear_bit(board, &j->busyflags);
- return 0;
-}
-
-static int read_filters(IXJ *j)
-{
- unsigned short fc, cnt, trg;
- int var;
-
- trg = 0;
- if (ixj_WriteDSPCommand(0x5144, j)) {
- if(ixjdebug & 0x0001) {
- printk(KERN_INFO "Read Frame Counter failed!\n");
- }
- return -1;
- }
- fc = j->ssr.high << 8 | j->ssr.low;
- if (fc == j->frame_count)
- return 1;
-
- j->frame_count = fc;
-
- if (j->dtmf_proc)
- return 1;
-
- var = 10;
-
- for (cnt = 0; cnt < 4; cnt++) {
- if (ixj_WriteDSPCommand(0x5154 + cnt, j)) {
- if(ixjdebug & 0x0001) {
- printk(KERN_INFO "Select Filter %d failed!\n", cnt);
- }
- return -1;
- }
- if (ixj_WriteDSPCommand(0x515C, j)) {
- if(ixjdebug & 0x0001) {
- printk(KERN_INFO "Read Filter History %d failed!\n", cnt);
- }
- return -1;
- }
- j->filter_hist[cnt] = j->ssr.high << 8 | j->ssr.low;
-
- if (j->cadence_f[cnt].enable) {
- if (j->filter_hist[cnt] & 3 && !(j->filter_hist[cnt] & 12)) {
- if (j->cadence_f[cnt].state == 0) {
- j->cadence_f[cnt].state = 1;
- j->cadence_f[cnt].on1min = jiffies + (long)((j->cadence_f[cnt].on1 * (hertz * (100 - var)) / 10000));
- j->cadence_f[cnt].on1dot = jiffies + (long)((j->cadence_f[cnt].on1 * (hertz * (100)) / 10000));
- j->cadence_f[cnt].on1max = jiffies + (long)((j->cadence_f[cnt].on1 * (hertz * (100 + var)) / 10000));
- } else if (j->cadence_f[cnt].state == 2 &&
- (time_after(jiffies, j->cadence_f[cnt].off1min) &&
- time_before(jiffies, j->cadence_f[cnt].off1max))) {
- if (j->cadence_f[cnt].on2) {
- j->cadence_f[cnt].state = 3;
- j->cadence_f[cnt].on2min = jiffies + (long)((j->cadence_f[cnt].on2 * (hertz * (100 - var)) / 10000));
- j->cadence_f[cnt].on2dot = jiffies + (long)((j->cadence_f[cnt].on2 * (hertz * (100)) / 10000));
- j->cadence_f[cnt].on2max = jiffies + (long)((j->cadence_f[cnt].on2 * (hertz * (100 + var)) / 10000));
- } else {
- j->cadence_f[cnt].state = 7;
- }
- } else if (j->cadence_f[cnt].state == 4 &&
- (time_after(jiffies, j->cadence_f[cnt].off2min) &&
- time_before(jiffies, j->cadence_f[cnt].off2max))) {
- if (j->cadence_f[cnt].on3) {
- j->cadence_f[cnt].state = 5;
- j->cadence_f[cnt].on3min = jiffies + (long)((j->cadence_f[cnt].on3 * (hertz * (100 - var)) / 10000));
- j->cadence_f[cnt].on3dot = jiffies + (long)((j->cadence_f[cnt].on3 * (hertz * (100)) / 10000));
- j->cadence_f[cnt].on3max = jiffies + (long)((j->cadence_f[cnt].on3 * (hertz * (100 + var)) / 10000));
- } else {
- j->cadence_f[cnt].state = 7;
- }
- } else {
- j->cadence_f[cnt].state = 0;
- }
- } else if (j->filter_hist[cnt] & 12 && !(j->filter_hist[cnt] & 3)) {
- if (j->cadence_f[cnt].state == 1) {
- if(!j->cadence_f[cnt].on1) {
- j->cadence_f[cnt].state = 7;
- } else if((time_after(jiffies, j->cadence_f[cnt].on1min) &&
- time_before(jiffies, j->cadence_f[cnt].on1max))) {
- if(j->cadence_f[cnt].off1) {
- j->cadence_f[cnt].state = 2;
- j->cadence_f[cnt].off1min = jiffies + (long)((j->cadence_f[cnt].off1 * (hertz * (100 - var)) / 10000));
- j->cadence_f[cnt].off1dot = jiffies + (long)((j->cadence_f[cnt].off1 * (hertz * (100)) / 10000));
- j->cadence_f[cnt].off1max = jiffies + (long)((j->cadence_f[cnt].off1 * (hertz * (100 + var)) / 10000));
- } else {
- j->cadence_f[cnt].state = 7;
- }
- } else {
- j->cadence_f[cnt].state = 0;
- }
- } else if (j->cadence_f[cnt].state == 3) {
- if((time_after(jiffies, j->cadence_f[cnt].on2min) &&
- time_before(jiffies, j->cadence_f[cnt].on2max))) {
- if(j->cadence_f[cnt].off2) {
- j->cadence_f[cnt].state = 4;
- j->cadence_f[cnt].off2min = jiffies + (long)((j->cadence_f[cnt].off2 * (hertz * (100 - var)) / 10000));
- j->cadence_f[cnt].off2dot = jiffies + (long)((j->cadence_f[cnt].off2 * (hertz * (100)) / 10000));
- j->cadence_f[cnt].off2max = jiffies + (long)((j->cadence_f[cnt].off2 * (hertz * (100 + var)) / 10000));
- } else {
- j->cadence_f[cnt].state = 7;
- }
- } else {
- j->cadence_f[cnt].state = 0;
- }
- } else if (j->cadence_f[cnt].state == 5) {
- if ((time_after(jiffies, j->cadence_f[cnt].on3min) &&
- time_before(jiffies, j->cadence_f[cnt].on3max))) {
- if(j->cadence_f[cnt].off3) {
- j->cadence_f[cnt].state = 6;
- j->cadence_f[cnt].off3min = jiffies + (long)((j->cadence_f[cnt].off3 * (hertz * (100 - var)) / 10000));
- j->cadence_f[cnt].off3dot = jiffies + (long)((j->cadence_f[cnt].off3 * (hertz * (100)) / 10000));
- j->cadence_f[cnt].off3max = jiffies + (long)((j->cadence_f[cnt].off3 * (hertz * (100 + var)) / 10000));
- } else {
- j->cadence_f[cnt].state = 7;
- }
- } else {
- j->cadence_f[cnt].state = 0;
- }
- } else {
- j->cadence_f[cnt].state = 0;
- }
- } else {
- switch(j->cadence_f[cnt].state) {
- case 1:
- if(time_after(jiffies, j->cadence_f[cnt].on1dot) &&
- !j->cadence_f[cnt].off1 &&
- !j->cadence_f[cnt].on2 && !j->cadence_f[cnt].off2 &&
- !j->cadence_f[cnt].on3 && !j->cadence_f[cnt].off3) {
- j->cadence_f[cnt].state = 7;
- }
- break;
- case 3:
- if(time_after(jiffies, j->cadence_f[cnt].on2dot) &&
- !j->cadence_f[cnt].off2 &&
- !j->cadence_f[cnt].on3 && !j->cadence_f[cnt].off3) {
- j->cadence_f[cnt].state = 7;
- }
- break;
- case 5:
- if(time_after(jiffies, j->cadence_f[cnt].on3dot) &&
- !j->cadence_f[cnt].off3) {
- j->cadence_f[cnt].state = 7;
- }
- break;
- }
- }
-
- if (ixjdebug & 0x0040) {
- printk(KERN_INFO "IXJ Tone Cadence state = %d /dev/phone%d at %ld\n", j->cadence_f[cnt].state, j->board, jiffies);
- switch(j->cadence_f[cnt].state) {
- case 0:
- printk(KERN_INFO "IXJ /dev/phone%d No Tone detected\n", j->board);
- break;
- case 1:
- printk(KERN_INFO "IXJ /dev/phone%d Next Tone Cadence state at %u %ld - %ld - %ld\n", j->board,
- j->cadence_f[cnt].on1, j->cadence_f[cnt].on1min, j->cadence_f[cnt].on1dot, j->cadence_f[cnt].on1max);
- break;
- case 2:
- printk(KERN_INFO "IXJ /dev/phone%d Next Tone Cadence state at %ld - %ld\n", j->board, j->cadence_f[cnt].off1min,
- j->cadence_f[cnt].off1max);
- break;
- case 3:
- printk(KERN_INFO "IXJ /dev/phone%d Next Tone Cadence state at %ld - %ld\n", j->board, j->cadence_f[cnt].on2min,
- j->cadence_f[cnt].on2max);
- break;
- case 4:
- printk(KERN_INFO "IXJ /dev/phone%d Next Tone Cadence state at %ld - %ld\n", j->board, j->cadence_f[cnt].off2min,
- j->cadence_f[cnt].off2max);
- break;
- case 5:
- printk(KERN_INFO "IXJ /dev/phone%d Next Tone Cadence state at %ld - %ld\n", j->board, j->cadence_f[cnt].on3min,
- j->cadence_f[cnt].on3max);
- break;
- case 6:
- printk(KERN_INFO "IXJ /dev/phone%d Next Tone Cadence state at %ld - %ld\n", j->board, j->cadence_f[cnt].off3min,
- j->cadence_f[cnt].off3max);
- break;
- }
- }
- }
- if (j->cadence_f[cnt].state == 7) {
- j->cadence_f[cnt].state = 0;
- if (j->cadence_f[cnt].enable == 1)
- j->cadence_f[cnt].enable = 0;
- switch (cnt) {
- case 0:
- if(ixjdebug & 0x0020) {
- printk(KERN_INFO "Filter Cadence 0 triggered %ld\n", jiffies);
- }
- j->ex.bits.fc0 = 1;
- ixj_kill_fasync(j, SIG_FC0, POLL_IN);
- break;
- case 1:
- if(ixjdebug & 0x0020) {
- printk(KERN_INFO "Filter Cadence 1 triggered %ld\n", jiffies);
- }
- j->ex.bits.fc1 = 1;
- ixj_kill_fasync(j, SIG_FC1, POLL_IN);
- break;
- case 2:
- if(ixjdebug & 0x0020) {
- printk(KERN_INFO "Filter Cadence 2 triggered %ld\n", jiffies);
- }
- j->ex.bits.fc2 = 1;
- ixj_kill_fasync(j, SIG_FC2, POLL_IN);
- break;
- case 3:
- if(ixjdebug & 0x0020) {
- printk(KERN_INFO "Filter Cadence 3 triggered %ld\n", jiffies);
- }
- j->ex.bits.fc3 = 1;
- ixj_kill_fasync(j, SIG_FC3, POLL_IN);
- break;
- }
- }
- if (j->filter_en[cnt] && ((j->filter_hist[cnt] & 3 && !(j->filter_hist[cnt] & 12)) ||
- (j->filter_hist[cnt] & 12 && !(j->filter_hist[cnt] & 3)))) {
- if((j->filter_hist[cnt] & 3 && !(j->filter_hist[cnt] & 12))) {
- trg = 1;
- } else if((j->filter_hist[cnt] & 12 && !(j->filter_hist[cnt] & 3))) {
- trg = 0;
- }
- switch (cnt) {
- case 0:
- if(ixjdebug & 0x0020) {
- printk(KERN_INFO "Filter 0 triggered %d at %ld\n", trg, jiffies);
- }
- j->ex.bits.f0 = 1;
- ixj_kill_fasync(j, SIG_F0, POLL_IN);
- break;
- case 1:
- if(ixjdebug & 0x0020) {
- printk(KERN_INFO "Filter 1 triggered %d at %ld\n", trg, jiffies);
- }
- j->ex.bits.f1 = 1;
- ixj_kill_fasync(j, SIG_F1, POLL_IN);
- break;
- case 2:
- if(ixjdebug & 0x0020) {
- printk(KERN_INFO "Filter 2 triggered %d at %ld\n", trg, jiffies);
- }
- j->ex.bits.f2 = 1;
- ixj_kill_fasync(j, SIG_F2, POLL_IN);
- break;
- case 3:
- if(ixjdebug & 0x0020) {
- printk(KERN_INFO "Filter 3 triggered %d at %ld\n", trg, jiffies);
- }
- j->ex.bits.f3 = 1;
- ixj_kill_fasync(j, SIG_F3, POLL_IN);
- break;
- }
- }
- }
- return 0;
-}
-
-static int LineMonitor(IXJ *j)
-{
- if (j->dtmf_proc) {
- return -1;
- }
- j->dtmf_proc = 1;
-
- if (ixj_WriteDSPCommand(0x7000, j)) /* Line Monitor */
- return -1;
-
- j->dtmf.bytes.high = j->ssr.high;
- j->dtmf.bytes.low = j->ssr.low;
- if (!j->dtmf_state && j->dtmf.bits.dtmf_valid) {
- j->dtmf_state = 1;
- j->dtmf_current = j->dtmf.bits.digit;
- }
- if (j->dtmf_state && !j->dtmf.bits.dtmf_valid) /* && j->dtmf_wp != j->dtmf_rp) */
- {
- if(!j->cidcw_wait) {
- j->dtmfbuffer[j->dtmf_wp] = j->dtmf_current;
- j->dtmf_wp++;
- if (j->dtmf_wp == 79)
- j->dtmf_wp = 0;
- j->ex.bits.dtmf_ready = 1;
- if(j->ex_sig.bits.dtmf_ready) {
- ixj_kill_fasync(j, SIG_DTMF_READY, POLL_IN);
- }
- }
- else if(j->dtmf_current == 0x00 || j->dtmf_current == 0x0D) {
- if(ixjdebug & 0x0020) {
- printk("IXJ phone%d saw CIDCW Ack DTMF %d from display at %ld\n", j->board, j->dtmf_current, jiffies);
- }
- j->flags.cidcw_ack = 1;
- }
- j->dtmf_state = 0;
- }
- j->dtmf_proc = 0;
-
- return 0;
-}
-
-/************************************************************************
-*
-* Functions to allow alaw <-> ulaw conversions.
-*
-************************************************************************/
-
-static void ulaw2alaw(unsigned char *buff, unsigned long len)
-{
- static unsigned char table_ulaw2alaw[] =
- {
- 0x2A, 0x2B, 0x28, 0x29, 0x2E, 0x2F, 0x2C, 0x2D,
- 0x22, 0x23, 0x20, 0x21, 0x26, 0x27, 0x24, 0x25,
- 0x3A, 0x3B, 0x38, 0x39, 0x3E, 0x3F, 0x3C, 0x3D,
- 0x32, 0x33, 0x30, 0x31, 0x36, 0x37, 0x34, 0x35,
- 0x0B, 0x08, 0x09, 0x0E, 0x0F, 0x0C, 0x0D, 0x02,
- 0x03, 0x00, 0x01, 0x06, 0x07, 0x04, 0x05, 0x1A,
- 0x1B, 0x18, 0x19, 0x1E, 0x1F, 0x1C, 0x1D, 0x12,
- 0x13, 0x10, 0x11, 0x16, 0x17, 0x14, 0x15, 0x6B,
- 0x68, 0x69, 0x6E, 0x6F, 0x6C, 0x6D, 0x62, 0x63,
- 0x60, 0x61, 0x66, 0x67, 0x64, 0x65, 0x7B, 0x79,
- 0x7E, 0x7F, 0x7C, 0x7D, 0x72, 0x73, 0x70, 0x71,
- 0x76, 0x77, 0x74, 0x75, 0x4B, 0x49, 0x4F, 0x4D,
- 0x42, 0x43, 0x40, 0x41, 0x46, 0x47, 0x44, 0x45,
- 0x5A, 0x5B, 0x58, 0x59, 0x5E, 0x5F, 0x5C, 0x5D,
- 0x52, 0x52, 0x53, 0x53, 0x50, 0x50, 0x51, 0x51,
- 0x56, 0x56, 0x57, 0x57, 0x54, 0x54, 0x55, 0xD5,
- 0xAA, 0xAB, 0xA8, 0xA9, 0xAE, 0xAF, 0xAC, 0xAD,
- 0xA2, 0xA3, 0xA0, 0xA1, 0xA6, 0xA7, 0xA4, 0xA5,
- 0xBA, 0xBB, 0xB8, 0xB9, 0xBE, 0xBF, 0xBC, 0xBD,
- 0xB2, 0xB3, 0xB0, 0xB1, 0xB6, 0xB7, 0xB4, 0xB5,
- 0x8B, 0x88, 0x89, 0x8E, 0x8F, 0x8C, 0x8D, 0x82,
- 0x83, 0x80, 0x81, 0x86, 0x87, 0x84, 0x85, 0x9A,
- 0x9B, 0x98, 0x99, 0x9E, 0x9F, 0x9C, 0x9D, 0x92,
- 0x93, 0x90, 0x91, 0x96, 0x97, 0x94, 0x95, 0xEB,
- 0xE8, 0xE9, 0xEE, 0xEF, 0xEC, 0xED, 0xE2, 0xE3,
- 0xE0, 0xE1, 0xE6, 0xE7, 0xE4, 0xE5, 0xFB, 0xF9,
- 0xFE, 0xFF, 0xFC, 0xFD, 0xF2, 0xF3, 0xF0, 0xF1,
- 0xF6, 0xF7, 0xF4, 0xF5, 0xCB, 0xC9, 0xCF, 0xCD,
- 0xC2, 0xC3, 0xC0, 0xC1, 0xC6, 0xC7, 0xC4, 0xC5,
- 0xDA, 0xDB, 0xD8, 0xD9, 0xDE, 0xDF, 0xDC, 0xDD,
- 0xD2, 0xD2, 0xD3, 0xD3, 0xD0, 0xD0, 0xD1, 0xD1,
- 0xD6, 0xD6, 0xD7, 0xD7, 0xD4, 0xD4, 0xD5, 0xD5
- };
-
- while (len--)
- {
- *buff = table_ulaw2alaw[*(unsigned char *)buff];
- buff++;
- }
-}
-
-static void alaw2ulaw(unsigned char *buff, unsigned long len)
-{
- static unsigned char table_alaw2ulaw[] =
- {
- 0x29, 0x2A, 0x27, 0x28, 0x2D, 0x2E, 0x2B, 0x2C,
- 0x21, 0x22, 0x1F, 0x20, 0x25, 0x26, 0x23, 0x24,
- 0x39, 0x3A, 0x37, 0x38, 0x3D, 0x3E, 0x3B, 0x3C,
- 0x31, 0x32, 0x2F, 0x30, 0x35, 0x36, 0x33, 0x34,
- 0x0A, 0x0B, 0x08, 0x09, 0x0E, 0x0F, 0x0C, 0x0D,
- 0x02, 0x03, 0x00, 0x01, 0x06, 0x07, 0x04, 0x05,
- 0x1A, 0x1B, 0x18, 0x19, 0x1E, 0x1F, 0x1C, 0x1D,
- 0x12, 0x13, 0x10, 0x11, 0x16, 0x17, 0x14, 0x15,
- 0x62, 0x63, 0x60, 0x61, 0x66, 0x67, 0x64, 0x65,
- 0x5D, 0x5D, 0x5C, 0x5C, 0x5F, 0x5F, 0x5E, 0x5E,
- 0x74, 0x76, 0x70, 0x72, 0x7C, 0x7E, 0x78, 0x7A,
- 0x6A, 0x6B, 0x68, 0x69, 0x6E, 0x6F, 0x6C, 0x6D,
- 0x48, 0x49, 0x46, 0x47, 0x4C, 0x4D, 0x4A, 0x4B,
- 0x40, 0x41, 0x3F, 0x3F, 0x44, 0x45, 0x42, 0x43,
- 0x56, 0x57, 0x54, 0x55, 0x5A, 0x5B, 0x58, 0x59,
- 0x4F, 0x4F, 0x4E, 0x4E, 0x52, 0x53, 0x50, 0x51,
- 0xA9, 0xAA, 0xA7, 0xA8, 0xAD, 0xAE, 0xAB, 0xAC,
- 0xA1, 0xA2, 0x9F, 0xA0, 0xA5, 0xA6, 0xA3, 0xA4,
- 0xB9, 0xBA, 0xB7, 0xB8, 0xBD, 0xBE, 0xBB, 0xBC,
- 0xB1, 0xB2, 0xAF, 0xB0, 0xB5, 0xB6, 0xB3, 0xB4,
- 0x8A, 0x8B, 0x88, 0x89, 0x8E, 0x8F, 0x8C, 0x8D,
- 0x82, 0x83, 0x80, 0x81, 0x86, 0x87, 0x84, 0x85,
- 0x9A, 0x9B, 0x98, 0x99, 0x9E, 0x9F, 0x9C, 0x9D,
- 0x92, 0x93, 0x90, 0x91, 0x96, 0x97, 0x94, 0x95,
- 0xE2, 0xE3, 0xE0, 0xE1, 0xE6, 0xE7, 0xE4, 0xE5,
- 0xDD, 0xDD, 0xDC, 0xDC, 0xDF, 0xDF, 0xDE, 0xDE,
- 0xF4, 0xF6, 0xF0, 0xF2, 0xFC, 0xFE, 0xF8, 0xFA,
- 0xEA, 0xEB, 0xE8, 0xE9, 0xEE, 0xEF, 0xEC, 0xED,
- 0xC8, 0xC9, 0xC6, 0xC7, 0xCC, 0xCD, 0xCA, 0xCB,
- 0xC0, 0xC1, 0xBF, 0xBF, 0xC4, 0xC5, 0xC2, 0xC3,
- 0xD6, 0xD7, 0xD4, 0xD5, 0xDA, 0xDB, 0xD8, 0xD9,
- 0xCF, 0xCF, 0xCE, 0xCE, 0xD2, 0xD3, 0xD0, 0xD1
- };
-
- while (len--)
- {
- *buff = table_alaw2ulaw[*(unsigned char *)buff];
- buff++;
- }
-}
-
-static ssize_t ixj_read(struct file * file_p, char __user *buf, size_t length, loff_t * ppos)
-{
- unsigned long i = *ppos;
- IXJ * j = get_ixj(NUM(file_p->f_path.dentry->d_inode));
-
- DECLARE_WAITQUEUE(wait, current);
-
- if (j->flags.inread)
- return -EALREADY;
-
- j->flags.inread = 1;
-
- add_wait_queue(&j->read_q, &wait);
- set_current_state(TASK_INTERRUPTIBLE);
- mb();
-
- while (!j->read_buffer_ready || (j->dtmf_state && j->flags.dtmf_oob)) {
- ++j->read_wait;
- if (file_p->f_flags & O_NONBLOCK) {
- set_current_state(TASK_RUNNING);
- remove_wait_queue(&j->read_q, &wait);
- j->flags.inread = 0;
- return -EAGAIN;
- }
- if (!ixj_hookstate(j)) {
- set_current_state(TASK_RUNNING);
- remove_wait_queue(&j->read_q, &wait);
- j->flags.inread = 0;
- return 0;
- }
- interruptible_sleep_on(&j->read_q);
- if (signal_pending(current)) {
- set_current_state(TASK_RUNNING);
- remove_wait_queue(&j->read_q, &wait);
- j->flags.inread = 0;
- return -EINTR;
- }
- }
-
- remove_wait_queue(&j->read_q, &wait);
- set_current_state(TASK_RUNNING);
- /* Don't ever copy more than the user asks */
- if(j->rec_codec == ALAW)
- ulaw2alaw(j->read_buffer, min(length, j->read_buffer_size));
- i = copy_to_user(buf, j->read_buffer, min(length, j->read_buffer_size));
- j->read_buffer_ready = 0;
- if (i) {
- j->flags.inread = 0;
- return -EFAULT;
- } else {
- j->flags.inread = 0;
- return min(length, j->read_buffer_size);
- }
-}
-
-static ssize_t ixj_enhanced_read(struct file * file_p, char __user *buf, size_t length,
- loff_t * ppos)
-{
- int pre_retval;
- ssize_t read_retval = 0;
- IXJ *j = get_ixj(NUM(file_p->f_path.dentry->d_inode));
-
- pre_retval = ixj_PreRead(j, 0L);
- switch (pre_retval) {
- case NORMAL:
- read_retval = ixj_read(file_p, buf, length, ppos);
- ixj_PostRead(j, 0L);
- break;
- case NOPOST:
- read_retval = ixj_read(file_p, buf, length, ppos);
- break;
- case POSTONLY:
- ixj_PostRead(j, 0L);
- break;
- default:
- read_retval = pre_retval;
- }
- return read_retval;
-}
-
-static ssize_t ixj_write(struct file *file_p, const char __user *buf, size_t count, loff_t * ppos)
-{
- unsigned long i = *ppos;
- IXJ *j = file_p->private_data;
-
- DECLARE_WAITQUEUE(wait, current);
-
- if (j->flags.inwrite)
- return -EALREADY;
-
- j->flags.inwrite = 1;
-
- add_wait_queue(&j->write_q, &wait);
- set_current_state(TASK_INTERRUPTIBLE);
- mb();
-
-
- while (!j->write_buffers_empty) {
- ++j->write_wait;
- if (file_p->f_flags & O_NONBLOCK) {
- set_current_state(TASK_RUNNING);
- remove_wait_queue(&j->write_q, &wait);
- j->flags.inwrite = 0;
- return -EAGAIN;
- }
- if (!ixj_hookstate(j)) {
- set_current_state(TASK_RUNNING);
- remove_wait_queue(&j->write_q, &wait);
- j->flags.inwrite = 0;
- return 0;
- }
- interruptible_sleep_on(&j->write_q);
- if (signal_pending(current)) {
- set_current_state(TASK_RUNNING);
- remove_wait_queue(&j->write_q, &wait);
- j->flags.inwrite = 0;
- return -EINTR;
- }
- }
- set_current_state(TASK_RUNNING);
- remove_wait_queue(&j->write_q, &wait);
- if (j->write_buffer_wp + count >= j->write_buffer_end)
- j->write_buffer_wp = j->write_buffer;
- i = copy_from_user(j->write_buffer_wp, buf, min(count, j->write_buffer_size));
- if (i) {
- j->flags.inwrite = 0;
- return -EFAULT;
- }
- if(j->play_codec == ALAW)
- alaw2ulaw(j->write_buffer_wp, min(count, j->write_buffer_size));
- j->flags.inwrite = 0;
- return min(count, j->write_buffer_size);
-}
-
-static ssize_t ixj_enhanced_write(struct file * file_p, const char __user *buf, size_t count, loff_t * ppos)
-{
- int pre_retval;
- ssize_t write_retval = 0;
-
- IXJ *j = get_ixj(NUM(file_p->f_path.dentry->d_inode));
-
- pre_retval = ixj_PreWrite(j, 0L);
- switch (pre_retval) {
- case NORMAL:
- write_retval = ixj_write(file_p, buf, count, ppos);
- if (write_retval > 0) {
- ixj_PostWrite(j, 0L);
- j->write_buffer_wp += write_retval;
- j->write_buffers_empty--;
- }
- break;
- case NOPOST:
- write_retval = ixj_write(file_p, buf, count, ppos);
- if (write_retval > 0) {
- j->write_buffer_wp += write_retval;
- j->write_buffers_empty--;
- }
- break;
- case POSTONLY:
- ixj_PostWrite(j, 0L);
- break;
- default:
- write_retval = pre_retval;
- }
- return write_retval;
-}
-
-static void ixj_read_frame(IXJ *j)
-{
- int cnt, dly;
-
- if (j->read_buffer) {
- for (cnt = 0; cnt < j->rec_frame_size * 2; cnt += 2) {
- if (!(cnt % 16) && !IsRxReady(j)) {
- dly = 0;
- while (!IsRxReady(j)) {
- if (dly++ > 5) {
- dly = 0;
- break;
- }
- udelay(10);
- }
- }
- /* Throw away word 0 of the 8021 compressed format to get standard G.729. */
- if (j->rec_codec == G729 && (cnt == 0 || cnt == 10 || cnt == 20)) {
- inb_p(j->DSPbase + 0x0E);
- inb_p(j->DSPbase + 0x0F);
- }
- *(j->read_buffer + cnt) = inb_p(j->DSPbase + 0x0E);
- *(j->read_buffer + cnt + 1) = inb_p(j->DSPbase + 0x0F);
- }
- ++j->framesread;
- if (j->intercom != -1) {
- if (IsTxReady(get_ixj(j->intercom))) {
- for (cnt = 0; cnt < j->rec_frame_size * 2; cnt += 2) {
- if (!(cnt % 16) && !IsTxReady(j)) {
- dly = 0;
- while (!IsTxReady(j)) {
- if (dly++ > 5) {
- dly = 0;
- break;
- }
- udelay(10);
- }
- }
- outb_p(*(j->read_buffer + cnt), get_ixj(j->intercom)->DSPbase + 0x0C);
- outb_p(*(j->read_buffer + cnt + 1), get_ixj(j->intercom)->DSPbase + 0x0D);
- }
- get_ixj(j->intercom)->frameswritten++;
- }
- } else {
- j->read_buffer_ready = 1;
- wake_up_interruptible(&j->read_q); /* Wake any blocked readers */
-
- wake_up_interruptible(&j->poll_q); /* Wake any blocked selects */
-
- if(j->ixj_signals[SIG_READ_READY])
- ixj_kill_fasync(j, SIG_READ_READY, POLL_OUT);
- }
- }
-}
-
-static short fsk[][6][20] =
-{
- {
- {
- 0, 17846, 29934, 32364, 24351, 8481, -10126, -25465, -32587, -29196,
- -16384, 1715, 19260, 30591, 32051, 23170, 6813, -11743, -26509, -32722
- },
- {
- -28377, -14876, 3425, 20621, 31163, 31650, 21925, 5126, -13328, -27481,
- -32767, -27481, -13328, 5126, 21925, 31650, 31163, 20621, 3425, -14876
- },
- {
- -28377, -32722, -26509, -11743, 6813, 23170, 32051, 30591, 19260, 1715,
- -16384, -29196, -32587, -25465, -10126, 8481, 24351, 32364, 29934, 17846
- },
- {
- 0, -17846, -29934, -32364, -24351, -8481, 10126, 25465, 32587, 29196,
- 16384, -1715, -19260, -30591, -32051, -23170, -6813, 11743, 26509, 32722
- },
- {
- 28377, 14876, -3425, -20621, -31163, -31650, -21925, -5126, 13328, 27481,
- 32767, 27481, 13328, -5126, -21925, -31650, -31163, -20621, -3425, 14876
- },
- {
- 28377, 32722, 26509, 11743, -6813, -23170, -32051, -30591, -19260, -1715,
- 16384, 29196, 32587, 25465, 10126, -8481, -24351, -32364, -29934, -17846
- }
- },
- {
- {
- 0, 10126, 19260, 26509, 31163, 32767, 31163, 26509, 19260, 10126,
- 0, -10126, -19260, -26509, -31163, -32767, -31163, -26509, -19260, -10126
- },
- {
- -28377, -21925, -13328, -3425, 6813, 16384, 24351, 29934, 32587, 32051,
- 28377, 21925, 13328, 3425, -6813, -16384, -24351, -29934, -32587, -32051
- },
- {
- -28377, -32051, -32587, -29934, -24351, -16384, -6813, 3425, 13328, 21925,
- 28377, 32051, 32587, 29934, 24351, 16384, 6813, -3425, -13328, -21925
- },
- {
- 0, -10126, -19260, -26509, -31163, -32767, -31163, -26509, -19260, -10126,
- 0, 10126, 19260, 26509, 31163, 32767, 31163, 26509, 19260, 10126
- },
- {
- 28377, 21925, 13328, 3425, -6813, -16383, -24351, -29934, -32587, -32051,
- -28377, -21925, -13328, -3425, 6813, 16383, 24351, 29934, 32587, 32051
- },
- {
- 28377, 32051, 32587, 29934, 24351, 16384, 6813, -3425, -13328, -21925,
- -28377, -32051, -32587, -29934, -24351, -16384, -6813, 3425, 13328, 21925
- }
- }
-};
-
-
-static void ixj_write_cid_bit(IXJ *j, int bit)
-{
- while (j->fskcnt < 20) {
- if(j->fskdcnt < (j->fsksize - 1))
- j->fskdata[j->fskdcnt++] = fsk[bit][j->fskz][j->fskcnt];
-
- j->fskcnt += 3;
- }
- j->fskcnt %= 20;
-
- if (!bit)
- j->fskz++;
- if (j->fskz >= 6)
- j->fskz = 0;
-
-}
-
-static void ixj_write_cid_byte(IXJ *j, char byte)
-{
- IXJ_CBYTE cb;
-
- cb.cbyte = byte;
- ixj_write_cid_bit(j, 0);
- ixj_write_cid_bit(j, cb.cbits.b0 ? 1 : 0);
- ixj_write_cid_bit(j, cb.cbits.b1 ? 1 : 0);
- ixj_write_cid_bit(j, cb.cbits.b2 ? 1 : 0);
- ixj_write_cid_bit(j, cb.cbits.b3 ? 1 : 0);
- ixj_write_cid_bit(j, cb.cbits.b4 ? 1 : 0);
- ixj_write_cid_bit(j, cb.cbits.b5 ? 1 : 0);
- ixj_write_cid_bit(j, cb.cbits.b6 ? 1 : 0);
- ixj_write_cid_bit(j, cb.cbits.b7 ? 1 : 0);
- ixj_write_cid_bit(j, 1);
-}
-
-static void ixj_write_cid_seize(IXJ *j)
-{
- int cnt;
-
- for (cnt = 0; cnt < 150; cnt++) {
- ixj_write_cid_bit(j, 0);
- ixj_write_cid_bit(j, 1);
- }
- for (cnt = 0; cnt < 180; cnt++) {
- ixj_write_cid_bit(j, 1);
- }
-}
-
-static void ixj_write_cidcw_seize(IXJ *j)
-{
- int cnt;
-
- for (cnt = 0; cnt < 80; cnt++) {
- ixj_write_cid_bit(j, 1);
- }
-}
-
-static int ixj_write_cid_string(IXJ *j, char *s, int checksum)
-{
- int cnt;
-
- for (cnt = 0; cnt < strlen(s); cnt++) {
- ixj_write_cid_byte(j, s[cnt]);
- checksum = (checksum + s[cnt]);
- }
- return checksum;
-}
-
-static void ixj_pad_fsk(IXJ *j, int pad)
-{
- int cnt;
-
- for (cnt = 0; cnt < pad; cnt++) {
- if(j->fskdcnt < (j->fsksize - 1))
- j->fskdata[j->fskdcnt++] = 0x0000;
- }
- for (cnt = 0; cnt < 720; cnt++) {
- if(j->fskdcnt < (j->fsksize - 1))
- j->fskdata[j->fskdcnt++] = 0x0000;
- }
-}
-
-static void ixj_pre_cid(IXJ *j)
-{
- j->cid_play_codec = j->play_codec;
- j->cid_play_frame_size = j->play_frame_size;
- j->cid_play_volume = get_play_volume(j);
- j->cid_play_flag = j->flags.playing;
-
- j->cid_rec_codec = j->rec_codec;
- j->cid_rec_volume = get_rec_volume(j);
- j->cid_rec_flag = j->flags.recording;
-
- j->cid_play_aec_level = j->aec_level;
-
- switch(j->baseframe.low) {
- case 0xA0:
- j->cid_base_frame_size = 20;
- break;
- case 0x50:
- j->cid_base_frame_size = 10;
- break;
- case 0xF0:
- j->cid_base_frame_size = 30;
- break;
- }
-
- ixj_play_stop(j);
- ixj_cpt_stop(j);
-
- j->flags.cidplay = 1;
-
- set_base_frame(j, 30);
- set_play_codec(j, LINEAR16);
- set_play_volume(j, 0x1B);
- ixj_play_start(j);
-}
-
-static void ixj_post_cid(IXJ *j)
-{
- ixj_play_stop(j);
-
- if(j->cidsize > 5000) {
- SLIC_SetState(PLD_SLIC_STATE_STANDBY, j);
- }
- j->flags.cidplay = 0;
- if(ixjdebug & 0x0200) {
- printk("IXJ phone%d Finished Playing CallerID data %ld\n", j->board, jiffies);
- }
-
- ixj_fsk_free(j);
-
- j->fskdcnt = 0;
- set_base_frame(j, j->cid_base_frame_size);
- set_play_codec(j, j->cid_play_codec);
- ixj_aec_start(j, j->cid_play_aec_level);
- set_play_volume(j, j->cid_play_volume);
-
- set_rec_codec(j, j->cid_rec_codec);
- set_rec_volume(j, j->cid_rec_volume);
-
- if(j->cid_rec_flag)
- ixj_record_start(j);
-
- if(j->cid_play_flag)
- ixj_play_start(j);
-
- if(j->cid_play_flag) {
- wake_up_interruptible(&j->write_q); /* Wake any blocked writers */
- }
-}
-
-static void ixj_write_cid(IXJ *j)
-{
- char sdmf1[50];
- char sdmf2[50];
- char sdmf3[80];
- char mdmflen, len1, len2, len3;
- int pad;
-
- int checksum = 0;
-
- if (j->dsp.low == 0x20 || j->flags.cidplay)
- return;
-
- j->fskz = j->fskphase = j->fskcnt = j->fskdcnt = 0;
- j->cidsize = j->cidcnt = 0;
-
- ixj_fsk_alloc(j);
-
- strcpy(sdmf1, j->cid_send.month);
- strcat(sdmf1, j->cid_send.day);
- strcat(sdmf1, j->cid_send.hour);
- strcat(sdmf1, j->cid_send.min);
- strcpy(sdmf2, j->cid_send.number);
- strcpy(sdmf3, j->cid_send.name);
-
- len1 = strlen(sdmf1);
- len2 = strlen(sdmf2);
- len3 = strlen(sdmf3);
- mdmflen = len1 + len2 + len3 + 6;
-
- while(1){
- ixj_write_cid_seize(j);
-
- ixj_write_cid_byte(j, 0x80);
- checksum = 0x80;
- ixj_write_cid_byte(j, mdmflen);
- checksum = checksum + mdmflen;
-
- ixj_write_cid_byte(j, 0x01);
- checksum = checksum + 0x01;
- ixj_write_cid_byte(j, len1);
- checksum = checksum + len1;
- checksum = ixj_write_cid_string(j, sdmf1, checksum);
- if(ixj_hookstate(j) & 1)
- break;
-
- ixj_write_cid_byte(j, 0x02);
- checksum = checksum + 0x02;
- ixj_write_cid_byte(j, len2);
- checksum = checksum + len2;
- checksum = ixj_write_cid_string(j, sdmf2, checksum);
- if(ixj_hookstate(j) & 1)
- break;
-
- ixj_write_cid_byte(j, 0x07);
- checksum = checksum + 0x07;
- ixj_write_cid_byte(j, len3);
- checksum = checksum + len3;
- checksum = ixj_write_cid_string(j, sdmf3, checksum);
- if(ixj_hookstate(j) & 1)
- break;
-
- checksum %= 256;
- checksum ^= 0xFF;
- checksum += 1;
-
- ixj_write_cid_byte(j, (char) checksum);
-
- pad = j->fskdcnt % 240;
- if (pad) {
- pad = 240 - pad;
- }
- ixj_pad_fsk(j, pad);
- break;
- }
-
- ixj_write_frame(j);
-}
-
-static void ixj_write_cidcw(IXJ *j)
-{
- IXJ_TONE ti;
-
- char sdmf1[50];
- char sdmf2[50];
- char sdmf3[80];
- char mdmflen, len1, len2, len3;
- int pad;
-
- int checksum = 0;
-
- if (j->dsp.low == 0x20 || j->flags.cidplay)
- return;
-
- j->fskz = j->fskphase = j->fskcnt = j->fskdcnt = 0;
- j->cidsize = j->cidcnt = 0;
-
- ixj_fsk_alloc(j);
-
- j->flags.cidcw_ack = 0;
-
- ti.tone_index = 23;
- ti.gain0 = 1;
- ti.freq0 = hz440;
- ti.gain1 = 0;
- ti.freq1 = 0;
- ixj_init_tone(j, &ti);
-
- ixj_set_tone_on(1500, j);
- ixj_set_tone_off(32, j);
- if(ixjdebug & 0x0200) {
- printk("IXJ cidcw phone%d first tone start at %ld\n", j->board, jiffies);
- }
- ixj_play_tone(j, 23);
-
- clear_bit(j->board, &j->busyflags);
- while(j->tone_state)
- schedule_timeout_interruptible(1);
- while(test_and_set_bit(j->board, (void *)&j->busyflags) != 0)
- schedule_timeout_interruptible(1);
- if(ixjdebug & 0x0200) {
- printk("IXJ cidcw phone%d first tone end at %ld\n", j->board, jiffies);
- }
-
- ti.tone_index = 24;
- ti.gain0 = 1;
- ti.freq0 = hz2130;
- ti.gain1 = 0;
- ti.freq1 = hz2750;
- ixj_init_tone(j, &ti);
-
- ixj_set_tone_off(10, j);
- ixj_set_tone_on(600, j);
- if(ixjdebug & 0x0200) {
- printk("IXJ cidcw phone%d second tone start at %ld\n", j->board, jiffies);
- }
- ixj_play_tone(j, 24);
-
- clear_bit(j->board, &j->busyflags);
- while(j->tone_state)
- schedule_timeout_interruptible(1);
- while(test_and_set_bit(j->board, (void *)&j->busyflags) != 0)
- schedule_timeout_interruptible(1);
- if(ixjdebug & 0x0200) {
- printk("IXJ cidcw phone%d sent second tone at %ld\n", j->board, jiffies);
- }
-
- j->cidcw_wait = jiffies + ((50 * hertz) / 100);
-
- clear_bit(j->board, &j->busyflags);
- while(!j->flags.cidcw_ack && time_before(jiffies, j->cidcw_wait))
- schedule_timeout_interruptible(1);
- while(test_and_set_bit(j->board, (void *)&j->busyflags) != 0)
- schedule_timeout_interruptible(1);
- j->cidcw_wait = 0;
- if(!j->flags.cidcw_ack) {
- if(ixjdebug & 0x0200) {
- printk("IXJ cidcw phone%d did not receive ACK from display %ld\n", j->board, jiffies);
- }
- ixj_post_cid(j);
- if(j->cid_play_flag) {
- wake_up_interruptible(&j->write_q); /* Wake any blocked readers */
- }
- return;
- } else {
- ixj_pre_cid(j);
- }
- j->flags.cidcw_ack = 0;
- strcpy(sdmf1, j->cid_send.month);
- strcat(sdmf1, j->cid_send.day);
- strcat(sdmf1, j->cid_send.hour);
- strcat(sdmf1, j->cid_send.min);
- strcpy(sdmf2, j->cid_send.number);
- strcpy(sdmf3, j->cid_send.name);
-
- len1 = strlen(sdmf1);
- len2 = strlen(sdmf2);
- len3 = strlen(sdmf3);
- mdmflen = len1 + len2 + len3 + 6;
-
- ixj_write_cidcw_seize(j);
-
- ixj_write_cid_byte(j, 0x80);
- checksum = 0x80;
- ixj_write_cid_byte(j, mdmflen);
- checksum = checksum + mdmflen;
-
- ixj_write_cid_byte(j, 0x01);
- checksum = checksum + 0x01;
- ixj_write_cid_byte(j, len1);
- checksum = checksum + len1;
- checksum = ixj_write_cid_string(j, sdmf1, checksum);
-
- ixj_write_cid_byte(j, 0x02);
- checksum = checksum + 0x02;
- ixj_write_cid_byte(j, len2);
- checksum = checksum + len2;
- checksum = ixj_write_cid_string(j, sdmf2, checksum);
-
- ixj_write_cid_byte(j, 0x07);
- checksum = checksum + 0x07;
- ixj_write_cid_byte(j, len3);
- checksum = checksum + len3;
- checksum = ixj_write_cid_string(j, sdmf3, checksum);
-
- checksum %= 256;
- checksum ^= 0xFF;
- checksum += 1;
-
- ixj_write_cid_byte(j, (char) checksum);
-
- pad = j->fskdcnt % 240;
- if (pad) {
- pad = 240 - pad;
- }
- ixj_pad_fsk(j, pad);
- if(ixjdebug & 0x0200) {
- printk("IXJ cidcw phone%d sent FSK data at %ld\n", j->board, jiffies);
- }
-}
-
-static void ixj_write_vmwi(IXJ *j, int msg)
-{
- char mdmflen;
- int pad;
-
- int checksum = 0;
-
- if (j->dsp.low == 0x20 || j->flags.cidplay)
- return;
-
- j->fskz = j->fskphase = j->fskcnt = j->fskdcnt = 0;
- j->cidsize = j->cidcnt = 0;
-
- ixj_fsk_alloc(j);
-
- mdmflen = 3;
-
- if (j->port == PORT_POTS)
- SLIC_SetState(PLD_SLIC_STATE_OHT, j);
-
- ixj_write_cid_seize(j);
-
- ixj_write_cid_byte(j, 0x82);
- checksum = 0x82;
- ixj_write_cid_byte(j, mdmflen);
- checksum = checksum + mdmflen;
-
- ixj_write_cid_byte(j, 0x0B);
- checksum = checksum + 0x0B;
- ixj_write_cid_byte(j, 1);
- checksum = checksum + 1;
-
- if(msg) {
- ixj_write_cid_byte(j, 0xFF);
- checksum = checksum + 0xFF;
- }
- else {
- ixj_write_cid_byte(j, 0x00);
- checksum = checksum + 0x00;
- }
-
- checksum %= 256;
- checksum ^= 0xFF;
- checksum += 1;
-
- ixj_write_cid_byte(j, (char) checksum);
-
- pad = j->fskdcnt % 240;
- if (pad) {
- pad = 240 - pad;
- }
- ixj_pad_fsk(j, pad);
-}
-
-static void ixj_write_frame(IXJ *j)
-{
- int cnt, frame_count, dly;
- IXJ_WORD dat;
-
- frame_count = 0;
- if(j->flags.cidplay) {
- for(cnt = 0; cnt < 480; cnt++) {
- if (!(cnt % 16) && !IsTxReady(j)) {
- dly = 0;
- while (!IsTxReady(j)) {
- if (dly++ > 5) {
- dly = 0;
- break;
- }
- udelay(10);
- }
- }
- dat.word = j->fskdata[j->cidcnt++];
- outb_p(dat.bytes.low, j->DSPbase + 0x0C);
- outb_p(dat.bytes.high, j->DSPbase + 0x0D);
- cnt++;
- }
- if(j->cidcnt >= j->fskdcnt) {
- ixj_post_cid(j);
- }
- /* This may seem rude, but if we just played one frame of FSK data for CallerID
- and there is real audio data in the buffer, we need to throw it away because
- we just used it's time slot */
- if (j->write_buffer_rp > j->write_buffer_wp) {
- j->write_buffer_rp += j->cid_play_frame_size * 2;
- if (j->write_buffer_rp >= j->write_buffer_end) {
- j->write_buffer_rp = j->write_buffer;
- }
- j->write_buffers_empty++;
- wake_up_interruptible(&j->write_q); /* Wake any blocked writers */
-
- wake_up_interruptible(&j->poll_q); /* Wake any blocked selects */
- }
- } else if (j->write_buffer && j->write_buffers_empty < 1) {
- if (j->write_buffer_wp > j->write_buffer_rp) {
- frame_count =
- (j->write_buffer_wp - j->write_buffer_rp) / (j->play_frame_size * 2);
- }
- if (j->write_buffer_rp > j->write_buffer_wp) {
- frame_count =
- (j->write_buffer_wp - j->write_buffer) / (j->play_frame_size * 2) +
- (j->write_buffer_end - j->write_buffer_rp) / (j->play_frame_size * 2);
- }
- if (frame_count >= 1) {
- if (j->ver.low == 0x12 && j->play_mode && j->flags.play_first_frame) {
- BYTES blankword;
-
- switch (j->play_mode) {
- case PLAYBACK_MODE_ULAW:
- case PLAYBACK_MODE_ALAW:
- blankword.low = blankword.high = 0xFF;
- break;
- case PLAYBACK_MODE_8LINEAR:
- case PLAYBACK_MODE_16LINEAR:
- default:
- blankword.low = blankword.high = 0x00;
- break;
- case PLAYBACK_MODE_8LINEAR_WSS:
- blankword.low = blankword.high = 0x80;
- break;
- }
- for (cnt = 0; cnt < 16; cnt++) {
- if (!(cnt % 16) && !IsTxReady(j)) {
- dly = 0;
- while (!IsTxReady(j)) {
- if (dly++ > 5) {
- dly = 0;
- break;
- }
- udelay(10);
- }
- }
- outb_p((blankword.low), j->DSPbase + 0x0C);
- outb_p((blankword.high), j->DSPbase + 0x0D);
- }
- j->flags.play_first_frame = 0;
- } else if (j->play_codec == G723_63 && j->flags.play_first_frame) {
- for (cnt = 0; cnt < 24; cnt++) {
- BYTES blankword;
-
- if(cnt == 12) {
- blankword.low = 0x02;
- blankword.high = 0x00;
- }
- else {
- blankword.low = blankword.high = 0x00;
- }
- if (!(cnt % 16) && !IsTxReady(j)) {
- dly = 0;
- while (!IsTxReady(j)) {
- if (dly++ > 5) {
- dly = 0;
- break;
- }
- udelay(10);
- }
- }
- outb_p((blankword.low), j->DSPbase + 0x0C);
- outb_p((blankword.high), j->DSPbase + 0x0D);
- }
- j->flags.play_first_frame = 0;
- }
- for (cnt = 0; cnt < j->play_frame_size * 2; cnt += 2) {
- if (!(cnt % 16) && !IsTxReady(j)) {
- dly = 0;
- while (!IsTxReady(j)) {
- if (dly++ > 5) {
- dly = 0;
- break;
- }
- udelay(10);
- }
- }
- /* Add word 0 to G.729 frames for the 8021. Right now we don't do VAD/CNG */
- if (j->play_codec == G729 && (cnt == 0 || cnt == 10 || cnt == 20)) {
- if (j->write_buffer_rp[cnt] == 0 &&
- j->write_buffer_rp[cnt + 1] == 0 &&
- j->write_buffer_rp[cnt + 2] == 0 &&
- j->write_buffer_rp[cnt + 3] == 0 &&
- j->write_buffer_rp[cnt + 4] == 0 &&
- j->write_buffer_rp[cnt + 5] == 0 &&
- j->write_buffer_rp[cnt + 6] == 0 &&
- j->write_buffer_rp[cnt + 7] == 0 &&
- j->write_buffer_rp[cnt + 8] == 0 &&
- j->write_buffer_rp[cnt + 9] == 0) {
- /* someone is trying to write silence lets make this a type 0 frame. */
- outb_p(0x00, j->DSPbase + 0x0C);
- outb_p(0x00, j->DSPbase + 0x0D);
- } else {
- /* so all other frames are type 1. */
- outb_p(0x01, j->DSPbase + 0x0C);
- outb_p(0x00, j->DSPbase + 0x0D);
- }
- }
- outb_p(*(j->write_buffer_rp + cnt), j->DSPbase + 0x0C);
- outb_p(*(j->write_buffer_rp + cnt + 1), j->DSPbase + 0x0D);
- *(j->write_buffer_rp + cnt) = 0;
- *(j->write_buffer_rp + cnt + 1) = 0;
- }
- j->write_buffer_rp += j->play_frame_size * 2;
- if (j->write_buffer_rp >= j->write_buffer_end) {
- j->write_buffer_rp = j->write_buffer;
- }
- j->write_buffers_empty++;
- wake_up_interruptible(&j->write_q); /* Wake any blocked writers */
-
- wake_up_interruptible(&j->poll_q); /* Wake any blocked selects */
-
- ++j->frameswritten;
- }
- } else {
- j->drybuffer++;
- }
- if(j->ixj_signals[SIG_WRITE_READY]) {
- ixj_kill_fasync(j, SIG_WRITE_READY, POLL_OUT);
- }
-}
-
-static int idle(IXJ *j)
-{
- if (ixj_WriteDSPCommand(0x0000, j)) /* DSP Idle */
-
- return 0;
-
- if (j->ssr.high || j->ssr.low) {
- return 0;
- } else {
- j->play_mode = -1;
- j->flags.playing = 0;
- j->rec_mode = -1;
- j->flags.recording = 0;
- return 1;
- }
-}
-
-static int set_base_frame(IXJ *j, int size)
-{
- unsigned short cmd;
- int cnt;
-
- idle(j);
- j->cid_play_aec_level = j->aec_level;
- aec_stop(j);
- for (cnt = 0; cnt < 10; cnt++) {
- if (idle(j))
- break;
- }
- if (j->ssr.high || j->ssr.low)
- return -1;
- if (j->dsp.low != 0x20) {
- switch (size) {
- case 30:
- cmd = 0x07F0;
- /* Set Base Frame Size to 240 pg9-10 8021 */
- break;
- case 20:
- cmd = 0x07A0;
- /* Set Base Frame Size to 160 pg9-10 8021 */
- break;
- case 10:
- cmd = 0x0750;
- /* Set Base Frame Size to 80 pg9-10 8021 */
- break;
- default:
- return -1;
- }
- } else {
- if (size == 30)
- return size;
- else
- return -1;
- }
- if (ixj_WriteDSPCommand(cmd, j)) {
- j->baseframe.high = j->baseframe.low = 0xFF;
- return -1;
- } else {
- j->baseframe.high = j->ssr.high;
- j->baseframe.low = j->ssr.low;
- /* If the status returned is 0x0000 (pg9-9 8021) the call failed */
- if(j->baseframe.high == 0x00 && j->baseframe.low == 0x00) {
- return -1;
- }
- }
- ixj_aec_start(j, j->cid_play_aec_level);
- return size;
-}
-
-static int set_rec_codec(IXJ *j, int rate)
-{
- int retval = 0;
-
- j->rec_codec = rate;
-
- switch (rate) {
- case G723_63:
- if (j->ver.low != 0x12 || ixj_convert_loaded) {
- j->rec_frame_size = 12;
- j->rec_mode = 0;
- } else {
- retval = 1;
- }
- break;
- case G723_53:
- if (j->ver.low != 0x12 || ixj_convert_loaded) {
- j->rec_frame_size = 10;
- j->rec_mode = 0;
- } else {
- retval = 1;
- }
- break;
- case TS85:
- if (j->dsp.low == 0x20 || j->flags.ts85_loaded) {
- j->rec_frame_size = 16;
- j->rec_mode = 0;
- } else {
- retval = 1;
- }
- break;
- case TS48:
- if (j->ver.low != 0x12 || ixj_convert_loaded) {
- j->rec_frame_size = 9;
- j->rec_mode = 0;
- } else {
- retval = 1;
- }
- break;
- case TS41:
- if (j->ver.low != 0x12 || ixj_convert_loaded) {
- j->rec_frame_size = 8;
- j->rec_mode = 0;
- } else {
- retval = 1;
- }
- break;
- case G728:
- if (j->dsp.low != 0x20) {
- j->rec_frame_size = 48;
- j->rec_mode = 0;
- } else {
- retval = 1;
- }
- break;
- case G729:
- if (j->dsp.low != 0x20) {
- if (!j->flags.g729_loaded) {
- retval = 1;
- break;
- }
- switch (j->baseframe.low) {
- case 0xA0:
- j->rec_frame_size = 10;
- break;
- case 0x50:
- j->rec_frame_size = 5;
- break;
- default:
- j->rec_frame_size = 15;
- break;
- }
- j->rec_mode = 0;
- } else {
- retval = 1;
- }
- break;
- case G729B:
- if (j->dsp.low != 0x20) {
- if (!j->flags.g729_loaded) {
- retval = 1;
- break;
- }
- switch (j->baseframe.low) {
- case 0xA0:
- j->rec_frame_size = 12;
- break;
- case 0x50:
- j->rec_frame_size = 6;
- break;
- default:
- j->rec_frame_size = 18;
- break;
- }
- j->rec_mode = 0;
- } else {
- retval = 1;
- }
- break;
- case ULAW:
- switch (j->baseframe.low) {
- case 0xA0:
- j->rec_frame_size = 80;
- break;
- case 0x50:
- j->rec_frame_size = 40;
- break;
- default:
- j->rec_frame_size = 120;
- break;
- }
- j->rec_mode = 4;
- break;
- case ALAW:
- switch (j->baseframe.low) {
- case 0xA0:
- j->rec_frame_size = 80;
- break;
- case 0x50:
- j->rec_frame_size = 40;
- break;
- default:
- j->rec_frame_size = 120;
- break;
- }
- j->rec_mode = 4;
- break;
- case LINEAR16:
- switch (j->baseframe.low) {
- case 0xA0:
- j->rec_frame_size = 160;
- break;
- case 0x50:
- j->rec_frame_size = 80;
- break;
- default:
- j->rec_frame_size = 240;
- break;
- }
- j->rec_mode = 5;
- break;
- case LINEAR8:
- switch (j->baseframe.low) {
- case 0xA0:
- j->rec_frame_size = 80;
- break;
- case 0x50:
- j->rec_frame_size = 40;
- break;
- default:
- j->rec_frame_size = 120;
- break;
- }
- j->rec_mode = 6;
- break;
- case WSS:
- switch (j->baseframe.low) {
- case 0xA0:
- j->rec_frame_size = 80;
- break;
- case 0x50:
- j->rec_frame_size = 40;
- break;
- default:
- j->rec_frame_size = 120;
- break;
- }
- j->rec_mode = 7;
- break;
- default:
- kfree(j->read_buffer);
- j->rec_frame_size = 0;
- j->rec_mode = -1;
- j->read_buffer = NULL;
- j->read_buffer_size = 0;
- retval = 1;
- break;
- }
- return retval;
-}
-
-static int ixj_record_start(IXJ *j)
-{
- unsigned short cmd = 0x0000;
-
- if (j->read_buffer) {
- ixj_record_stop(j);
- }
- j->flags.recording = 1;
- ixj_WriteDSPCommand(0x0FE0, j); /* Put the DSP in full power mode. */
-
- if(ixjdebug & 0x0002)
- printk("IXJ %d Starting Record Codec %d at %ld\n", j->board, j->rec_codec, jiffies);
-
- if (!j->rec_mode) {
- switch (j->rec_codec) {
- case G723_63:
- cmd = 0x5131;
- break;
- case G723_53:
- cmd = 0x5132;
- break;
- case TS85:
- cmd = 0x5130; /* TrueSpeech 8.5 */
-
- break;
- case TS48:
- cmd = 0x5133; /* TrueSpeech 4.8 */
-
- break;
- case TS41:
- cmd = 0x5134; /* TrueSpeech 4.1 */
-
- break;
- case G728:
- cmd = 0x5135;
- break;
- case G729:
- case G729B:
- cmd = 0x5136;
- break;
- default:
- return 1;
- }
- if (ixj_WriteDSPCommand(cmd, j))
- return -1;
- }
- if (!j->read_buffer) {
- if (!j->read_buffer)
- j->read_buffer = kmalloc(j->rec_frame_size * 2, GFP_ATOMIC);
- if (!j->read_buffer) {
- printk("Read buffer allocation for ixj board %d failed!\n", j->board);
- return -ENOMEM;
- }
- }
- j->read_buffer_size = j->rec_frame_size * 2;
-
- if (ixj_WriteDSPCommand(0x5102, j)) /* Set Poll sync mode */
-
- return -1;
-
- switch (j->rec_mode) {
- case 0:
- cmd = 0x1C03; /* Record C1 */
-
- break;
- case 4:
- if (j->ver.low == 0x12) {
- cmd = 0x1E03; /* Record C1 */
-
- } else {
- cmd = 0x1E01; /* Record C1 */
-
- }
- break;
- case 5:
- if (j->ver.low == 0x12) {
- cmd = 0x1E83; /* Record C1 */
-
- } else {
- cmd = 0x1E81; /* Record C1 */
-
- }
- break;
- case 6:
- if (j->ver.low == 0x12) {
- cmd = 0x1F03; /* Record C1 */
-
- } else {
- cmd = 0x1F01; /* Record C1 */
-
- }
- break;
- case 7:
- if (j->ver.low == 0x12) {
- cmd = 0x1F83; /* Record C1 */
- } else {
- cmd = 0x1F81; /* Record C1 */
- }
- break;
- }
- if (ixj_WriteDSPCommand(cmd, j))
- return -1;
-
- if (j->flags.playing) {
- ixj_aec_start(j, j->aec_level);
- }
- return 0;
-}
-
-static void ixj_record_stop(IXJ *j)
-{
- if (ixjdebug & 0x0002)
- printk("IXJ %d Stopping Record Codec %d at %ld\n", j->board, j->rec_codec, jiffies);
-
- kfree(j->read_buffer);
- j->read_buffer = NULL;
- j->read_buffer_size = 0;
- if (j->rec_mode > -1) {
- ixj_WriteDSPCommand(0x5120, j);
- j->rec_mode = -1;
- }
- j->flags.recording = 0;
-}
-static void ixj_vad(IXJ *j, int arg)
-{
- if (arg)
- ixj_WriteDSPCommand(0x513F, j);
- else
- ixj_WriteDSPCommand(0x513E, j);
-}
-
-static void set_rec_depth(IXJ *j, int depth)
-{
- if (depth > 60)
- depth = 60;
- if (depth < 0)
- depth = 0;
- ixj_WriteDSPCommand(0x5180 + depth, j);
-}
-
-static void set_dtmf_prescale(IXJ *j, int volume)
-{
- ixj_WriteDSPCommand(0xCF07, j);
- ixj_WriteDSPCommand(volume, j);
-}
-
-static int get_dtmf_prescale(IXJ *j)
-{
- ixj_WriteDSPCommand(0xCF05, j);
- return j->ssr.high << 8 | j->ssr.low;
-}
-
-static void set_rec_volume(IXJ *j, int volume)
-{
- if(j->aec_level == AEC_AGC) {
- if (ixjdebug & 0x0002)
- printk(KERN_INFO "IXJ: /dev/phone%d Setting AGC Threshold to 0x%4.4x\n", j->board, volume);
- ixj_WriteDSPCommand(0xCF96, j);
- ixj_WriteDSPCommand(volume, j);
- } else {
- if (ixjdebug & 0x0002)
- printk(KERN_INFO "IXJ: /dev/phone %d Setting Record Volume to 0x%4.4x\n", j->board, volume);
- ixj_WriteDSPCommand(0xCF03, j);
- ixj_WriteDSPCommand(volume, j);
- }
-}
-
-static int set_rec_volume_linear(IXJ *j, int volume)
-{
- int newvolume, dsprecmax;
-
- if (ixjdebug & 0x0002)
- printk(KERN_INFO "IXJ: /dev/phone %d Setting Linear Record Volume to 0x%4.4x\n", j->board, volume);
- if(volume > 100 || volume < 0) {
- return -1;
- }
-
- /* This should normalize the perceived volumes between the different cards caused by differences in the hardware */
- switch (j->cardtype) {
- case QTI_PHONEJACK:
- dsprecmax = 0x440;
- break;
- case QTI_LINEJACK:
- dsprecmax = 0x180;
- ixj_mixer(0x0203, j); /*Voice Left Volume unmute 6db */
- ixj_mixer(0x0303, j); /*Voice Right Volume unmute 6db */
- ixj_mixer(0x0C00, j); /*Mono1 unmute 12db */
- break;
- case QTI_PHONEJACK_LITE:
- dsprecmax = 0x4C0;
- break;
- case QTI_PHONEJACK_PCI:
- dsprecmax = 0x100;
- break;
- case QTI_PHONECARD:
- dsprecmax = 0x400;
- break;
- default:
- return -1;
- }
- newvolume = (dsprecmax * volume) / 100;
- set_rec_volume(j, newvolume);
- return 0;
-}
-
-static int get_rec_volume(IXJ *j)
-{
- if(j->aec_level == AEC_AGC) {
- if (ixjdebug & 0x0002)
- printk(KERN_INFO "Getting AGC Threshold\n");
- ixj_WriteDSPCommand(0xCF86, j);
- if (ixjdebug & 0x0002)
- printk(KERN_INFO "AGC Threshold is 0x%2.2x%2.2x\n", j->ssr.high, j->ssr.low);
- return j->ssr.high << 8 | j->ssr.low;
- } else {
- if (ixjdebug & 0x0002)
- printk(KERN_INFO "Getting Record Volume\n");
- ixj_WriteDSPCommand(0xCF01, j);
- return j->ssr.high << 8 | j->ssr.low;
- }
-}
-
-static int get_rec_volume_linear(IXJ *j)
-{
- int volume, newvolume, dsprecmax;
-
- switch (j->cardtype) {
- case QTI_PHONEJACK:
- dsprecmax = 0x440;
- break;
- case QTI_LINEJACK:
- dsprecmax = 0x180;
- break;
- case QTI_PHONEJACK_LITE:
- dsprecmax = 0x4C0;
- break;
- case QTI_PHONEJACK_PCI:
- dsprecmax = 0x100;
- break;
- case QTI_PHONECARD:
- dsprecmax = 0x400;
- break;
- default:
- return -1;
- }
- volume = get_rec_volume(j);
- newvolume = (volume * 100) / dsprecmax;
- if(newvolume > 100)
- newvolume = 100;
- return newvolume;
-}
-
-static int get_rec_level(IXJ *j)
-{
- int retval;
-
- ixj_WriteDSPCommand(0xCF88, j);
-
- retval = j->ssr.high << 8 | j->ssr.low;
- retval = (retval * 256) / 240;
- return retval;
-}
-
-static void ixj_aec_start(IXJ *j, int level)
-{
- j->aec_level = level;
- if (ixjdebug & 0x0002)
- printk(KERN_INFO "AGC set = 0x%2.2x\n", j->aec_level);
- if (!level) {
- aec_stop(j);
- } else {
- if (j->rec_codec == G729 || j->play_codec == G729 || j->rec_codec == G729B || j->play_codec == G729B) {
- ixj_WriteDSPCommand(0xE022, j); /* Move AEC filter buffer */
-
- ixj_WriteDSPCommand(0x0300, j);
- }
- ixj_WriteDSPCommand(0xB001, j); /* AEC On */
-
- ixj_WriteDSPCommand(0xE013, j); /* Advanced AEC C1 */
-
- switch (level) {
- case AEC_LOW:
- ixj_WriteDSPCommand(0x0000, j); /* Advanced AEC C2 = off */
-
- ixj_WriteDSPCommand(0xE011, j);
- ixj_WriteDSPCommand(0xFFFF, j);
-
- ixj_WriteDSPCommand(0xCF97, j); /* Set AGC Enable */
- ixj_WriteDSPCommand(0x0000, j); /* to off */
-
- break;
-
- case AEC_MED:
- ixj_WriteDSPCommand(0x0600, j); /* Advanced AEC C2 = on medium */
-
- ixj_WriteDSPCommand(0xE011, j);
- ixj_WriteDSPCommand(0x0080, j);
-
- ixj_WriteDSPCommand(0xCF97, j); /* Set AGC Enable */
- ixj_WriteDSPCommand(0x0000, j); /* to off */
-
- break;
-
- case AEC_HIGH:
- ixj_WriteDSPCommand(0x0C00, j); /* Advanced AEC C2 = on high */
-
- ixj_WriteDSPCommand(0xE011, j);
- ixj_WriteDSPCommand(0x0080, j);
-
- ixj_WriteDSPCommand(0xCF97, j); /* Set AGC Enable */
- ixj_WriteDSPCommand(0x0000, j); /* to off */
-
- break;
-
- case AEC_AGC:
- /* First we have to put the AEC into advance auto mode so that AGC will not conflict with it */
- ixj_WriteDSPCommand(0x0002, j); /* Attenuation scaling factor of 2 */
-
- ixj_WriteDSPCommand(0xE011, j);
- ixj_WriteDSPCommand(0x0100, j); /* Higher Threshold Floor */
-
- ixj_WriteDSPCommand(0xE012, j); /* Set Train and Lock */
-
- if(j->cardtype == QTI_LINEJACK || j->cardtype == QTI_PHONECARD)
- ixj_WriteDSPCommand(0x0224, j);
- else
- ixj_WriteDSPCommand(0x1224, j);
-
- ixj_WriteDSPCommand(0xE014, j);
- ixj_WriteDSPCommand(0x0003, j); /* Lock threshold at 3dB */
-
- ixj_WriteDSPCommand(0xE338, j); /* Set Echo Suppresser Attenuation to 0dB */
-
- /* Now we can set the AGC initial parameters and turn it on */
- ixj_WriteDSPCommand(0xCF90, j); /* Set AGC Minimum gain */
- ixj_WriteDSPCommand(0x0020, j); /* to 0.125 (-18dB) */
-
- ixj_WriteDSPCommand(0xCF91, j); /* Set AGC Maximum gain */
- ixj_WriteDSPCommand(0x1000, j); /* to 16 (24dB) */
-
- ixj_WriteDSPCommand(0xCF92, j); /* Set AGC start gain */
- ixj_WriteDSPCommand(0x0800, j); /* to 8 (+18dB) */
-
- ixj_WriteDSPCommand(0xCF93, j); /* Set AGC hold time */
- ixj_WriteDSPCommand(0x1F40, j); /* to 2 seconds (units are 250us) */
-
- ixj_WriteDSPCommand(0xCF94, j); /* Set AGC Attack Time Constant */
- ixj_WriteDSPCommand(0x0005, j); /* to 8ms */
-
- ixj_WriteDSPCommand(0xCF95, j); /* Set AGC Decay Time Constant */
- ixj_WriteDSPCommand(0x000D, j); /* to 4096ms */
-
- ixj_WriteDSPCommand(0xCF96, j); /* Set AGC Attack Threshold */
- ixj_WriteDSPCommand(0x1200, j); /* to 25% */
-
- ixj_WriteDSPCommand(0xCF97, j); /* Set AGC Enable */
- ixj_WriteDSPCommand(0x0001, j); /* to on */
-
- break;
-
- case AEC_AUTO:
- ixj_WriteDSPCommand(0x0002, j); /* Attenuation scaling factor of 2 */
-
- ixj_WriteDSPCommand(0xE011, j);
- ixj_WriteDSPCommand(0x0100, j); /* Higher Threshold Floor */
-
- ixj_WriteDSPCommand(0xE012, j); /* Set Train and Lock */
-
- if(j->cardtype == QTI_LINEJACK || j->cardtype == QTI_PHONECARD)
- ixj_WriteDSPCommand(0x0224, j);
- else
- ixj_WriteDSPCommand(0x1224, j);
-
- ixj_WriteDSPCommand(0xE014, j);
- ixj_WriteDSPCommand(0x0003, j); /* Lock threshold at 3dB */
-
- ixj_WriteDSPCommand(0xE338, j); /* Set Echo Suppresser Attenuation to 0dB */
-
- break;
- }
- }
-}
-
-static void aec_stop(IXJ *j)
-{
- j->aec_level = AEC_OFF;
- if (j->rec_codec == G729 || j->play_codec == G729 || j->rec_codec == G729B || j->play_codec == G729B) {
- ixj_WriteDSPCommand(0xE022, j); /* Move AEC filter buffer back */
-
- ixj_WriteDSPCommand(0x0700, j);
- }
- if (j->play_mode != -1 && j->rec_mode != -1)
- {
- ixj_WriteDSPCommand(0xB002, j); /* AEC Stop */
- }
-}
-
-static int set_play_codec(IXJ *j, int rate)
-{
- int retval = 0;
-
- j->play_codec = rate;
-
- switch (rate) {
- case G723_63:
- if (j->ver.low != 0x12 || ixj_convert_loaded) {
- j->play_frame_size = 12;
- j->play_mode = 0;
- } else {
- retval = 1;
- }
- break;
- case G723_53:
- if (j->ver.low != 0x12 || ixj_convert_loaded) {
- j->play_frame_size = 10;
- j->play_mode = 0;
- } else {
- retval = 1;
- }
- break;
- case TS85:
- if (j->dsp.low == 0x20 || j->flags.ts85_loaded) {
- j->play_frame_size = 16;
- j->play_mode = 0;
- } else {
- retval = 1;
- }
- break;
- case TS48:
- if (j->ver.low != 0x12 || ixj_convert_loaded) {
- j->play_frame_size = 9;
- j->play_mode = 0;
- } else {
- retval = 1;
- }
- break;
- case TS41:
- if (j->ver.low != 0x12 || ixj_convert_loaded) {
- j->play_frame_size = 8;
- j->play_mode = 0;
- } else {
- retval = 1;
- }
- break;
- case G728:
- if (j->dsp.low != 0x20) {
- j->play_frame_size = 48;
- j->play_mode = 0;
- } else {
- retval = 1;
- }
- break;
- case G729:
- if (j->dsp.low != 0x20) {
- if (!j->flags.g729_loaded) {
- retval = 1;
- break;
- }
- switch (j->baseframe.low) {
- case 0xA0:
- j->play_frame_size = 10;
- break;
- case 0x50:
- j->play_frame_size = 5;
- break;
- default:
- j->play_frame_size = 15;
- break;
- }
- j->play_mode = 0;
- } else {
- retval = 1;
- }
- break;
- case G729B:
- if (j->dsp.low != 0x20) {
- if (!j->flags.g729_loaded) {
- retval = 1;
- break;
- }
- switch (j->baseframe.low) {
- case 0xA0:
- j->play_frame_size = 12;
- break;
- case 0x50:
- j->play_frame_size = 6;
- break;
- default:
- j->play_frame_size = 18;
- break;
- }
- j->play_mode = 0;
- } else {
- retval = 1;
- }
- break;
- case ULAW:
- switch (j->baseframe.low) {
- case 0xA0:
- j->play_frame_size = 80;
- break;
- case 0x50:
- j->play_frame_size = 40;
- break;
- default:
- j->play_frame_size = 120;
- break;
- }
- j->play_mode = 2;
- break;
- case ALAW:
- switch (j->baseframe.low) {
- case 0xA0:
- j->play_frame_size = 80;
- break;
- case 0x50:
- j->play_frame_size = 40;
- break;
- default:
- j->play_frame_size = 120;
- break;
- }
- j->play_mode = 2;
- break;
- case LINEAR16:
- switch (j->baseframe.low) {
- case 0xA0:
- j->play_frame_size = 160;
- break;
- case 0x50:
- j->play_frame_size = 80;
- break;
- default:
- j->play_frame_size = 240;
- break;
- }
- j->play_mode = 6;
- break;
- case LINEAR8:
- switch (j->baseframe.low) {
- case 0xA0:
- j->play_frame_size = 80;
- break;
- case 0x50:
- j->play_frame_size = 40;
- break;
- default:
- j->play_frame_size = 120;
- break;
- }
- j->play_mode = 4;
- break;
- case WSS:
- switch (j->baseframe.low) {
- case 0xA0:
- j->play_frame_size = 80;
- break;
- case 0x50:
- j->play_frame_size = 40;
- break;
- default:
- j->play_frame_size = 120;
- break;
- }
- j->play_mode = 5;
- break;
- default:
- kfree(j->write_buffer);
- j->play_frame_size = 0;
- j->play_mode = -1;
- j->write_buffer = NULL;
- j->write_buffer_size = 0;
- retval = 1;
- break;
- }
- return retval;
-}
-
-static int ixj_play_start(IXJ *j)
-{
- unsigned short cmd = 0x0000;
-
- if (j->write_buffer) {
- ixj_play_stop(j);
- }
-
- if(ixjdebug & 0x0002)
- printk("IXJ %d Starting Play Codec %d at %ld\n", j->board, j->play_codec, jiffies);
-
- j->flags.playing = 1;
- ixj_WriteDSPCommand(0x0FE0, j); /* Put the DSP in full power mode. */
-
- j->flags.play_first_frame = 1;
- j->drybuffer = 0;
-
- if (!j->play_mode) {
- switch (j->play_codec) {
- case G723_63:
- cmd = 0x5231;
- break;
- case G723_53:
- cmd = 0x5232;
- break;
- case TS85:
- cmd = 0x5230; /* TrueSpeech 8.5 */
-
- break;
- case TS48:
- cmd = 0x5233; /* TrueSpeech 4.8 */
-
- break;
- case TS41:
- cmd = 0x5234; /* TrueSpeech 4.1 */
-
- break;
- case G728:
- cmd = 0x5235;
- break;
- case G729:
- case G729B:
- cmd = 0x5236;
- break;
- default:
- return 1;
- }
- if (ixj_WriteDSPCommand(cmd, j))
- return -1;
- }
- j->write_buffer = kmalloc(j->play_frame_size * 2, GFP_ATOMIC);
- if (!j->write_buffer) {
- printk("Write buffer allocation for ixj board %d failed!\n", j->board);
- return -ENOMEM;
- }
-/* j->write_buffers_empty = 2; */
- j->write_buffers_empty = 1;
- j->write_buffer_size = j->play_frame_size * 2;
- j->write_buffer_end = j->write_buffer + j->play_frame_size * 2;
- j->write_buffer_rp = j->write_buffer_wp = j->write_buffer;
-
- if (ixj_WriteDSPCommand(0x5202, j)) /* Set Poll sync mode */
-
- return -1;
-
- switch (j->play_mode) {
- case 0:
- cmd = 0x2C03;
- break;
- case 2:
- if (j->ver.low == 0x12) {
- cmd = 0x2C23;
- } else {
- cmd = 0x2C21;
- }
- break;
- case 4:
- if (j->ver.low == 0x12) {
- cmd = 0x2C43;
- } else {
- cmd = 0x2C41;
- }
- break;
- case 5:
- if (j->ver.low == 0x12) {
- cmd = 0x2C53;
- } else {
- cmd = 0x2C51;
- }
- break;
- case 6:
- if (j->ver.low == 0x12) {
- cmd = 0x2C63;
- } else {
- cmd = 0x2C61;
- }
- break;
- }
- if (ixj_WriteDSPCommand(cmd, j))
- return -1;
-
- if (ixj_WriteDSPCommand(0x2000, j)) /* Playback C2 */
- return -1;
-
- if (ixj_WriteDSPCommand(0x2000 + j->play_frame_size, j)) /* Playback C3 */
- return -1;
-
- if (j->flags.recording) {
- ixj_aec_start(j, j->aec_level);
- }
-
- return 0;
-}
-
-static void ixj_play_stop(IXJ *j)
-{
- if (ixjdebug & 0x0002)
- printk("IXJ %d Stopping Play Codec %d at %ld\n", j->board, j->play_codec, jiffies);
-
- kfree(j->write_buffer);
- j->write_buffer = NULL;
- j->write_buffer_size = 0;
- if (j->play_mode > -1) {
- ixj_WriteDSPCommand(0x5221, j); /* Stop playback and flush buffers. 8022 reference page 9-40 */
-
- j->play_mode = -1;
- }
- j->flags.playing = 0;
-}
-
-static inline int get_play_level(IXJ *j)
-{
- int retval;
-
- ixj_WriteDSPCommand(0xCF8F, j); /* 8022 Reference page 9-38 */
- return j->ssr.high << 8 | j->ssr.low;
- retval = j->ssr.high << 8 | j->ssr.low;
- retval = (retval * 256) / 240;
- return retval;
-}
-
-static unsigned int ixj_poll(struct file *file_p, poll_table * wait)
-{
- unsigned int mask = 0;
-
- IXJ *j = get_ixj(NUM(file_p->f_path.dentry->d_inode));
-
- poll_wait(file_p, &(j->poll_q), wait);
- if (j->read_buffer_ready > 0)
- mask |= POLLIN | POLLRDNORM; /* readable */
- if (j->write_buffers_empty > 0)
- mask |= POLLOUT | POLLWRNORM; /* writable */
- if (j->ex.bytes)
- mask |= POLLPRI;
- return mask;
-}
-
-static int ixj_play_tone(IXJ *j, char tone)
-{
- if (!j->tone_state) {
- if(ixjdebug & 0x0002) {
- printk("IXJ %d starting tone %d at %ld\n", j->board, tone, jiffies);
- }
- if (j->dsp.low == 0x20) {
- idle(j);
- }
- j->tone_start_jif = jiffies;
-
- j->tone_state = 1;
- }
-
- j->tone_index = tone;
- if (ixj_WriteDSPCommand(0x6000 + j->tone_index, j))
- return -1;
-
- return 0;
-}
-
-static int ixj_set_tone_on(unsigned short arg, IXJ *j)
-{
- j->tone_on_time = arg;
-
- if (ixj_WriteDSPCommand(0x6E04, j)) /* Set Tone On Period */
-
- return -1;
-
- if (ixj_WriteDSPCommand(arg, j))
- return -1;
-
- return 0;
-}
-
-static int SCI_WaitHighSCI(IXJ *j)
-{
- int cnt;
-
- j->pld_scrr.byte = inb_p(j->XILINXbase);
- if (!j->pld_scrr.bits.sci) {
- for (cnt = 0; cnt < 10; cnt++) {
- udelay(32);
- j->pld_scrr.byte = inb_p(j->XILINXbase);
-
- if ((j->pld_scrr.bits.sci))
- return 1;
- }
- if (ixjdebug & 0x0001)
- printk(KERN_INFO "SCI Wait High failed %x\n", j->pld_scrr.byte);
- return 0;
- } else
- return 1;
-}
-
-static int SCI_WaitLowSCI(IXJ *j)
-{
- int cnt;
-
- j->pld_scrr.byte = inb_p(j->XILINXbase);
- if (j->pld_scrr.bits.sci) {
- for (cnt = 0; cnt < 10; cnt++) {
- udelay(32);
- j->pld_scrr.byte = inb_p(j->XILINXbase);
-
- if (!(j->pld_scrr.bits.sci))
- return 1;
- }
- if (ixjdebug & 0x0001)
- printk(KERN_INFO "SCI Wait Low failed %x\n", j->pld_scrr.byte);
- return 0;
- } else
- return 1;
-}
-
-static int SCI_Control(IXJ *j, int control)
-{
- switch (control) {
- case SCI_End:
- j->pld_scrw.bits.c0 = 0; /* Set PLD Serial control interface */
-
- j->pld_scrw.bits.c1 = 0; /* to no selection */
-
- break;
- case SCI_Enable_DAA:
- j->pld_scrw.bits.c0 = 1; /* Set PLD Serial control interface */
-
- j->pld_scrw.bits.c1 = 0; /* to write to DAA */
-
- break;
- case SCI_Enable_Mixer:
- j->pld_scrw.bits.c0 = 0; /* Set PLD Serial control interface */
-
- j->pld_scrw.bits.c1 = 1; /* to write to mixer */
-
- break;
- case SCI_Enable_EEPROM:
- j->pld_scrw.bits.c0 = 1; /* Set PLD Serial control interface */
-
- j->pld_scrw.bits.c1 = 1; /* to write to EEPROM */
-
- break;
- default:
- return 0;
- break;
- }
- outb_p(j->pld_scrw.byte, j->XILINXbase);
-
- switch (control) {
- case SCI_End:
- return 1;
- break;
- case SCI_Enable_DAA:
- case SCI_Enable_Mixer:
- case SCI_Enable_EEPROM:
- if (!SCI_WaitHighSCI(j))
- return 0;
- break;
- default:
- return 0;
- break;
- }
- return 1;
-}
-
-static int SCI_Prepare(IXJ *j)
-{
- if (!SCI_Control(j, SCI_End))
- return 0;
-
- if (!SCI_WaitLowSCI(j))
- return 0;
-
- return 1;
-}
-
-static int ixj_get_mixer(long val, IXJ *j)
-{
- int reg = (val & 0x1F00) >> 8;
- return j->mix.vol[reg];
-}
-
-static int ixj_mixer(long val, IXJ *j)
-{
- BYTES bytes;
-
- bytes.high = (val & 0x1F00) >> 8;
- bytes.low = val & 0x00FF;
-
- /* save mixer value so we can get back later on */
- j->mix.vol[bytes.high] = bytes.low;
-
- outb_p(bytes.high & 0x1F, j->XILINXbase + 0x03); /* Load Mixer Address */
-
- outb_p(bytes.low, j->XILINXbase + 0x02); /* Load Mixer Data */
-
- SCI_Control(j, SCI_Enable_Mixer);
-
- SCI_Control(j, SCI_End);
-
- return 0;
-}
-
-static int daa_load(BYTES * p_bytes, IXJ *j)
-{
- outb_p(p_bytes->high, j->XILINXbase + 0x03);
- outb_p(p_bytes->low, j->XILINXbase + 0x02);
- if (!SCI_Control(j, SCI_Enable_DAA))
- return 0;
- else
- return 1;
-}
-
-static int ixj_daa_cr4(IXJ *j, char reg)
-{
- BYTES bytes;
-
- switch (j->daa_mode) {
- case SOP_PU_SLEEP:
- bytes.high = 0x14;
- break;
- case SOP_PU_RINGING:
- bytes.high = 0x54;
- break;
- case SOP_PU_CONVERSATION:
- bytes.high = 0x94;
- break;
- case SOP_PU_PULSEDIALING:
- bytes.high = 0xD4;
- break;
- }
-
- j->m_DAAShadowRegs.SOP_REGS.SOP.cr4.reg = reg;
-
- switch (j->m_DAAShadowRegs.SOP_REGS.SOP.cr4.bitreg.AGX) {
- case 0:
- j->m_DAAShadowRegs.SOP_REGS.SOP.cr4.bitreg.AGR_Z = 0;
- break;
- case 1:
- j->m_DAAShadowRegs.SOP_REGS.SOP.cr4.bitreg.AGR_Z = 2;
- break;
- case 2:
- j->m_DAAShadowRegs.SOP_REGS.SOP.cr4.bitreg.AGR_Z = 1;
- break;
- case 3:
- j->m_DAAShadowRegs.SOP_REGS.SOP.cr4.bitreg.AGR_Z = 3;
- break;
- }
-
- bytes.low = j->m_DAAShadowRegs.SOP_REGS.SOP.cr4.reg;
-
- if (!daa_load(&bytes, j))
- return 0;
-
- if (!SCI_Prepare(j))
- return 0;
-
- return 1;
-}
-
-static char daa_int_read(IXJ *j)
-{
- BYTES bytes;
-
- if (!SCI_Prepare(j))
- return 0;
-
- bytes.high = 0x38;
- bytes.low = 0x00;
- outb_p(bytes.high, j->XILINXbase + 0x03);
- outb_p(bytes.low, j->XILINXbase + 0x02);
-
- if (!SCI_Control(j, SCI_Enable_DAA))
- return 0;
-
- bytes.high = inb_p(j->XILINXbase + 0x03);
- bytes.low = inb_p(j->XILINXbase + 0x02);
- if (bytes.low != ALISDAA_ID_BYTE) {
- if (ixjdebug & 0x0001)
- printk("Cannot read DAA ID Byte high = %d low = %d\n", bytes.high, bytes.low);
- return 0;
- }
- if (!SCI_Control(j, SCI_Enable_DAA))
- return 0;
- if (!SCI_Control(j, SCI_End))
- return 0;
-
- bytes.high = inb_p(j->XILINXbase + 0x03);
- bytes.low = inb_p(j->XILINXbase + 0x02);
-
- j->m_DAAShadowRegs.XOP_REGS.XOP.xr0.reg = bytes.high;
-
- return 1;
-}
-
-static char daa_CR_read(IXJ *j, int cr)
-{
- IXJ_WORD wdata;
- BYTES bytes;
-
- if (!SCI_Prepare(j))
- return 0;
-
- switch (j->daa_mode) {
- case SOP_PU_SLEEP:
- bytes.high = 0x30 + cr;
- break;
- case SOP_PU_RINGING:
- bytes.high = 0x70 + cr;
- break;
- case SOP_PU_CONVERSATION:
- bytes.high = 0xB0 + cr;
- break;
- case SOP_PU_PULSEDIALING:
- default:
- bytes.high = 0xF0 + cr;
- break;
- }
-
- bytes.low = 0x00;
-
- outb_p(bytes.high, j->XILINXbase + 0x03);
- outb_p(bytes.low, j->XILINXbase + 0x02);
-
- if (!SCI_Control(j, SCI_Enable_DAA))
- return 0;
-
- bytes.high = inb_p(j->XILINXbase + 0x03);
- bytes.low = inb_p(j->XILINXbase + 0x02);
- if (bytes.low != ALISDAA_ID_BYTE) {
- if (ixjdebug & 0x0001)
- printk("Cannot read DAA ID Byte high = %d low = %d\n", bytes.high, bytes.low);
- return 0;
- }
- if (!SCI_Control(j, SCI_Enable_DAA))
- return 0;
- if (!SCI_Control(j, SCI_End))
- return 0;
-
- wdata.word = inw_p(j->XILINXbase + 0x02);
-
- switch(cr){
- case 5:
- j->m_DAAShadowRegs.SOP_REGS.SOP.cr5.reg = wdata.bytes.high;
- break;
- case 4:
- j->m_DAAShadowRegs.SOP_REGS.SOP.cr4.reg = wdata.bytes.high;
- break;
- case 3:
- j->m_DAAShadowRegs.SOP_REGS.SOP.cr3.reg = wdata.bytes.high;
- break;
- case 2:
- j->m_DAAShadowRegs.SOP_REGS.SOP.cr2.reg = wdata.bytes.high;
- break;
- case 1:
- j->m_DAAShadowRegs.SOP_REGS.SOP.cr1.reg = wdata.bytes.high;
- break;
- case 0:
- j->m_DAAShadowRegs.SOP_REGS.SOP.cr0.reg = wdata.bytes.high;
- break;
- default:
- return 0;
- }
- return 1;
-}
-
-static int ixj_daa_cid_reset(IXJ *j)
-{
- int i;
- BYTES bytes;
-
- if (ixjdebug & 0x0002)
- printk("DAA Clearing CID ram\n");
-
- if (!SCI_Prepare(j))
- return 0;
-
- bytes.high = 0x58;
- bytes.low = 0x00;
- outb_p(bytes.high, j->XILINXbase + 0x03);
- outb_p(bytes.low, j->XILINXbase + 0x02);
-
- if (!SCI_Control(j, SCI_Enable_DAA))
- return 0;
-
- if (!SCI_WaitHighSCI(j))
- return 0;
-
- for (i = 0; i < ALISDAA_CALLERID_SIZE - 1; i += 2) {
- bytes.high = bytes.low = 0x00;
- outb_p(bytes.high, j->XILINXbase + 0x03);
-
- if (i < ALISDAA_CALLERID_SIZE - 1)
- outb_p(bytes.low, j->XILINXbase + 0x02);
-
- if (!SCI_Control(j, SCI_Enable_DAA))
- return 0;
-
- if (!SCI_WaitHighSCI(j))
- return 0;
-
- }
-
- if (!SCI_Control(j, SCI_End))
- return 0;
-
- if (ixjdebug & 0x0002)
- printk("DAA CID ram cleared\n");
-
- return 1;
-}
-
-static int ixj_daa_cid_read(IXJ *j)
-{
- int i;
- BYTES bytes;
- char CID[ALISDAA_CALLERID_SIZE];
- bool mContinue;
- char *pIn, *pOut;
-
- if (!SCI_Prepare(j))
- return 0;
-
- bytes.high = 0x78;
- bytes.low = 0x00;
- outb_p(bytes.high, j->XILINXbase + 0x03);
- outb_p(bytes.low, j->XILINXbase + 0x02);
-
- if (!SCI_Control(j, SCI_Enable_DAA))
- return 0;
-
- if (!SCI_WaitHighSCI(j))
- return 0;
-
- bytes.high = inb_p(j->XILINXbase + 0x03);
- bytes.low = inb_p(j->XILINXbase + 0x02);
- if (bytes.low != ALISDAA_ID_BYTE) {
- if (ixjdebug & 0x0001)
- printk("DAA Get Version Cannot read DAA ID Byte high = %d low = %d\n", bytes.high, bytes.low);
- return 0;
- }
- for (i = 0; i < ALISDAA_CALLERID_SIZE; i += 2) {
- bytes.high = bytes.low = 0x00;
- outb_p(bytes.high, j->XILINXbase + 0x03);
- outb_p(bytes.low, j->XILINXbase + 0x02);
-
- if (!SCI_Control(j, SCI_Enable_DAA))
- return 0;
-
- if (!SCI_WaitHighSCI(j))
- return 0;
-
- CID[i + 0] = inb_p(j->XILINXbase + 0x03);
- CID[i + 1] = inb_p(j->XILINXbase + 0x02);
- }
-
- if (!SCI_Control(j, SCI_End))
- return 0;
-
- pIn = CID;
- pOut = j->m_DAAShadowRegs.CAO_REGS.CAO.CallerID;
- mContinue = true;
- while (mContinue) {
- if ((pIn[1] & 0x03) == 0x01) {
- pOut[0] = pIn[0];
- }
- if ((pIn[2] & 0x0c) == 0x04) {
- pOut[1] = ((pIn[2] & 0x03) << 6) | ((pIn[1] & 0xfc) >> 2);
- }
- if ((pIn[3] & 0x30) == 0x10) {
- pOut[2] = ((pIn[3] & 0x0f) << 4) | ((pIn[2] & 0xf0) >> 4);
- }
- if ((pIn[4] & 0xc0) == 0x40) {
- pOut[3] = ((pIn[4] & 0x3f) << 2) | ((pIn[3] & 0xc0) >> 6);
- } else {
- mContinue = false;
- }
- pIn += 5, pOut += 4;
- }
- memset(&j->cid, 0, sizeof(PHONE_CID));
- pOut = j->m_DAAShadowRegs.CAO_REGS.CAO.CallerID;
- pOut += 4;
- strncpy(j->cid.month, pOut, 2);
- pOut += 2;
- strncpy(j->cid.day, pOut, 2);
- pOut += 2;
- strncpy(j->cid.hour, pOut, 2);
- pOut += 2;
- strncpy(j->cid.min, pOut, 2);
- pOut += 3;
- j->cid.numlen = *pOut;
- pOut += 1;
- strncpy(j->cid.number, pOut, j->cid.numlen);
- pOut += j->cid.numlen + 1;
- j->cid.namelen = *pOut;
- pOut += 1;
- strncpy(j->cid.name, pOut, j->cid.namelen);
-
- ixj_daa_cid_reset(j);
- return 1;
-}
-
-static char daa_get_version(IXJ *j)
-{
- BYTES bytes;
-
- if (!SCI_Prepare(j))
- return 0;
-
- bytes.high = 0x35;
- bytes.low = 0x00;
- outb_p(bytes.high, j->XILINXbase + 0x03);
- outb_p(bytes.low, j->XILINXbase + 0x02);
-
- if (!SCI_Control(j, SCI_Enable_DAA))
- return 0;
-
- bytes.high = inb_p(j->XILINXbase + 0x03);
- bytes.low = inb_p(j->XILINXbase + 0x02);
- if (bytes.low != ALISDAA_ID_BYTE) {
- if (ixjdebug & 0x0001)
- printk("DAA Get Version Cannot read DAA ID Byte high = %d low = %d\n", bytes.high, bytes.low);
- return 0;
- }
- if (!SCI_Control(j, SCI_Enable_DAA))
- return 0;
-
- if (!SCI_Control(j, SCI_End))
- return 0;
-
- bytes.high = inb_p(j->XILINXbase + 0x03);
- bytes.low = inb_p(j->XILINXbase + 0x02);
- if (ixjdebug & 0x0002)
- printk("DAA CR5 Byte high = 0x%x low = 0x%x\n", bytes.high, bytes.low);
- j->m_DAAShadowRegs.SOP_REGS.SOP.cr5.reg = bytes.high;
- return bytes.high;
-}
-
-static int daa_set_mode(IXJ *j, int mode)
-{
- /* NOTE:
- The DAA *MUST* be in the conversation mode if the
- PSTN line is to be seized (PSTN line off-hook).
- Taking the PSTN line off-hook while the DAA is in
- a mode other than conversation mode will cause a
- hardware failure of the ALIS-A part.
-
- NOTE:
- The DAA can only go to SLEEP, RINGING or PULSEDIALING modes
- if the PSTN line is on-hook. Failure to have the PSTN line
- in the on-hook state WILL CAUSE A HARDWARE FAILURE OF THE
- ALIS-A part.
- */
-
- BYTES bytes;
-
- j->flags.pstn_rmr = 0;
-
- if (!SCI_Prepare(j))
- return 0;
-
- switch (mode) {
- case SOP_PU_RESET:
- j->pld_scrw.bits.daafsyncen = 0; /* Turn off DAA Frame Sync */
-
- outb_p(j->pld_scrw.byte, j->XILINXbase);
- j->pld_slicw.bits.rly2 = 0;
- outb_p(j->pld_slicw.byte, j->XILINXbase + 0x01);
- bytes.high = 0x10;
- bytes.low = j->m_DAAShadowRegs.SOP_REGS.SOP.cr0.reg;
- daa_load(&bytes, j);
- if (!SCI_Prepare(j))
- return 0;
-
- j->daa_mode = SOP_PU_SLEEP;
- break;
- case SOP_PU_SLEEP:
- if(j->daa_mode == SOP_PU_SLEEP)
- {
- break;
- }
- if (ixjdebug & 0x0008)
- printk(KERN_INFO "phone DAA: SOP_PU_SLEEP at %ld\n", jiffies);
-/* if(j->daa_mode == SOP_PU_CONVERSATION) */
- {
- j->pld_scrw.bits.daafsyncen = 0; /* Turn off DAA Frame Sync */
-
- outb_p(j->pld_scrw.byte, j->XILINXbase);
- j->pld_slicw.bits.rly2 = 0;
- outb_p(j->pld_slicw.byte, j->XILINXbase + 0x01);
- bytes.high = 0x10;
- bytes.low = j->m_DAAShadowRegs.SOP_REGS.SOP.cr0.reg;
- daa_load(&bytes, j);
- if (!SCI_Prepare(j))
- return 0;
- }
- j->pld_scrw.bits.daafsyncen = 0; /* Turn off DAA Frame Sync */
-
- outb_p(j->pld_scrw.byte, j->XILINXbase);
- j->pld_slicw.bits.rly2 = 0;
- outb_p(j->pld_slicw.byte, j->XILINXbase + 0x01);
- bytes.high = 0x10;
- bytes.low = j->m_DAAShadowRegs.SOP_REGS.SOP.cr0.reg;
- daa_load(&bytes, j);
- if (!SCI_Prepare(j))
- return 0;
-
- j->daa_mode = SOP_PU_SLEEP;
- j->flags.pstn_ringing = 0;
- j->ex.bits.pstn_ring = 0;
- j->pstn_sleeptil = jiffies + (hertz / 4);
- wake_up_interruptible(&j->read_q); /* Wake any blocked readers */
- wake_up_interruptible(&j->write_q); /* Wake any blocked writers */
- wake_up_interruptible(&j->poll_q); /* Wake any blocked selects */
- break;
- case SOP_PU_RINGING:
- if (ixjdebug & 0x0008)
- printk(KERN_INFO "phone DAA: SOP_PU_RINGING at %ld\n", jiffies);
- j->pld_scrw.bits.daafsyncen = 0; /* Turn off DAA Frame Sync */
-
- outb_p(j->pld_scrw.byte, j->XILINXbase);
- j->pld_slicw.bits.rly2 = 0;
- outb_p(j->pld_slicw.byte, j->XILINXbase + 0x01);
- bytes.high = 0x50;
- bytes.low = j->m_DAAShadowRegs.SOP_REGS.SOP.cr0.reg;
- daa_load(&bytes, j);
- if (!SCI_Prepare(j))
- return 0;
- j->daa_mode = SOP_PU_RINGING;
- break;
- case SOP_PU_CONVERSATION:
- if (ixjdebug & 0x0008)
- printk(KERN_INFO "phone DAA: SOP_PU_CONVERSATION at %ld\n", jiffies);
- bytes.high = 0x90;
- bytes.low = j->m_DAAShadowRegs.SOP_REGS.SOP.cr0.reg;
- daa_load(&bytes, j);
- if (!SCI_Prepare(j))
- return 0;
- j->pld_slicw.bits.rly2 = 1;
- outb_p(j->pld_slicw.byte, j->XILINXbase + 0x01);
- j->pld_scrw.bits.daafsyncen = 1; /* Turn on DAA Frame Sync */
-
- outb_p(j->pld_scrw.byte, j->XILINXbase);
- j->daa_mode = SOP_PU_CONVERSATION;
- j->flags.pstn_ringing = 0;
- j->ex.bits.pstn_ring = 0;
- j->pstn_sleeptil = jiffies;
- j->pstn_ring_start = j->pstn_ring_stop = j->pstn_ring_int = 0;
- break;
- case SOP_PU_PULSEDIALING:
- if (ixjdebug & 0x0008)
- printk(KERN_INFO "phone DAA: SOP_PU_PULSEDIALING at %ld\n", jiffies);
- j->pld_scrw.bits.daafsyncen = 0; /* Turn off DAA Frame Sync */
-
- outb_p(j->pld_scrw.byte, j->XILINXbase);
- j->pld_slicw.bits.rly2 = 0;
- outb_p(j->pld_slicw.byte, j->XILINXbase + 0x01);
- bytes.high = 0xD0;
- bytes.low = j->m_DAAShadowRegs.SOP_REGS.SOP.cr0.reg;
- daa_load(&bytes, j);
- if (!SCI_Prepare(j))
- return 0;
- j->daa_mode = SOP_PU_PULSEDIALING;
- break;
- default:
- break;
- }
- return 1;
-}
-
-static int ixj_daa_write(IXJ *j)
-{
- BYTES bytes;
-
- j->flags.pstncheck = 1;
-
- daa_set_mode(j, SOP_PU_SLEEP);
-
- if (!SCI_Prepare(j))
- return 0;
-
- outb_p(j->pld_scrw.byte, j->XILINXbase);
-
- bytes.high = 0x14;
- bytes.low = j->m_DAAShadowRegs.SOP_REGS.SOP.cr4.reg;
- if (!daa_load(&bytes, j))
- return 0;
-
- bytes.high = j->m_DAAShadowRegs.SOP_REGS.SOP.cr3.reg;
- bytes.low = j->m_DAAShadowRegs.SOP_REGS.SOP.cr2.reg;
- if (!daa_load(&bytes, j))
- return 0;
-
- bytes.high = j->m_DAAShadowRegs.SOP_REGS.SOP.cr1.reg;
- bytes.low = j->m_DAAShadowRegs.SOP_REGS.SOP.cr0.reg;
- if (!daa_load(&bytes, j))
- return 0;
-
- if (!SCI_Prepare(j))
- return 0;
-
- bytes.high = 0x1F;
- bytes.low = j->m_DAAShadowRegs.XOP_REGS.XOP.xr7.reg;
- if (!daa_load(&bytes, j))
- return 0;
-
- bytes.high = j->m_DAAShadowRegs.XOP_xr6_W.reg;
- bytes.low = j->m_DAAShadowRegs.XOP_REGS.XOP.xr5.reg;
- if (!daa_load(&bytes, j))
- return 0;
-
- bytes.high = j->m_DAAShadowRegs.XOP_REGS.XOP.xr4.reg;
- bytes.low = j->m_DAAShadowRegs.XOP_REGS.XOP.xr3.reg;
- if (!daa_load(&bytes, j))
- return 0;
-
- bytes.high = j->m_DAAShadowRegs.XOP_REGS.XOP.xr2.reg;
- bytes.low = j->m_DAAShadowRegs.XOP_REGS.XOP.xr1.reg;
- if (!daa_load(&bytes, j))
- return 0;
-
- bytes.high = j->m_DAAShadowRegs.XOP_xr0_W.reg;
- bytes.low = 0x00;
- if (!daa_load(&bytes, j))
- return 0;
-
- if (!SCI_Prepare(j))
- return 0;
-
- bytes.high = 0x00;
- bytes.low = j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_1[7];
- if (!daa_load(&bytes, j))
- return 0;
-
- bytes.high = j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_1[6];
- bytes.low = j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_1[5];
- if (!daa_load(&bytes, j))
- return 0;
-
- bytes.high = j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_1[4];
- bytes.low = j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_1[3];
- if (!daa_load(&bytes, j))
- return 0;
-
- bytes.high = j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_1[2];
- bytes.low = j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_1[1];
- if (!daa_load(&bytes, j))
- return 0;
-
- bytes.high = j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_1[0];
- bytes.low = 0x00;
- if (!daa_load(&bytes, j))
- return 0;
-
- if (!SCI_Control(j, SCI_End))
- return 0;
- if (!SCI_WaitLowSCI(j))
- return 0;
-
- bytes.high = 0x01;
- bytes.low = j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_2[7];
- if (!daa_load(&bytes, j))
- return 0;
-
- bytes.high = j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_2[6];
- bytes.low = j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_2[5];
- if (!daa_load(&bytes, j))
- return 0;
-
- bytes.high = j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_2[4];
- bytes.low = j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_2[3];
- if (!daa_load(&bytes, j))
- return 0;
-
- bytes.high = j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_2[2];
- bytes.low = j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_2[1];
- if (!daa_load(&bytes, j))
- return 0;
-
- bytes.high = j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_2[0];
- bytes.low = 0x00;
- if (!daa_load(&bytes, j))
- return 0;
-
- if (!SCI_Control(j, SCI_End))
- return 0;
- if (!SCI_WaitLowSCI(j))
- return 0;
-
- bytes.high = 0x02;
- bytes.low = j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_3[7];
- if (!daa_load(&bytes, j))
- return 0;
-
- bytes.high = j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_3[6];
- bytes.low = j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_3[5];
- if (!daa_load(&bytes, j))
- return 0;
-
- bytes.high = j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_3[4];
- bytes.low = j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_3[3];
- if (!daa_load(&bytes, j))
- return 0;
-
- bytes.high = j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_3[2];
- bytes.low = j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_3[1];
- if (!daa_load(&bytes, j))
- return 0;
-
- bytes.high = j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_3[0];
- bytes.low = 0x00;
- if (!daa_load(&bytes, j))
- return 0;
-
- if (!SCI_Control(j, SCI_End))
- return 0;
- if (!SCI_WaitLowSCI(j))
- return 0;
-
- bytes.high = 0x03;
- bytes.low = j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_1[7];
- if (!daa_load(&bytes, j))
- return 0;
-
- bytes.high = j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_1[6];
- bytes.low = j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_1[5];
- if (!daa_load(&bytes, j))
- return 0;
-
- bytes.high = j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_1[4];
- bytes.low = j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_1[3];
- if (!daa_load(&bytes, j))
- return 0;
-
- bytes.high = j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_1[2];
- bytes.low = j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_1[1];
- if (!daa_load(&bytes, j))
- return 0;
-
- bytes.high = j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_1[0];
- bytes.low = 0x00;
- if (!daa_load(&bytes, j))
- return 0;
-
- if (!SCI_Control(j, SCI_End))
- return 0;
- if (!SCI_WaitLowSCI(j))
- return 0;
-
- bytes.high = 0x04;
- bytes.low = j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_1[7];
- if (!daa_load(&bytes, j))
- return 0;
-
- bytes.high = j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_1[6];
- bytes.low = j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_1[5];
- if (!daa_load(&bytes, j))
- return 0;
-
- bytes.high = j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_1[4];
- bytes.low = j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_1[3];
- if (!daa_load(&bytes, j))
- return 0;
-
- bytes.high = j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_1[2];
- bytes.low = j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_1[1];
- if (!daa_load(&bytes, j))
- return 0;
-
- bytes.high = j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_1[0];
- bytes.low = 0x00;
- if (!daa_load(&bytes, j))
- return 0;
-
- if (!SCI_Control(j, SCI_End))
- return 0;
- if (!SCI_WaitLowSCI(j))
- return 0;
-
- bytes.high = 0x05;
- bytes.low = j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_2[7];
- if (!daa_load(&bytes, j))
- return 0;
-
- bytes.high = j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_2[6];
- bytes.low = j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_2[5];
- if (!daa_load(&bytes, j))
- return 0;
-
- bytes.high = j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_2[4];
- bytes.low = j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_2[3];
- if (!daa_load(&bytes, j))
- return 0;
-
- bytes.high = j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_2[2];
- bytes.low = j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_2[1];
- if (!daa_load(&bytes, j))
- return 0;
-
- bytes.high = j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_2[0];
- bytes.low = 0x00;
- if (!daa_load(&bytes, j))
- return 0;
-
- if (!SCI_Control(j, SCI_End))
- return 0;
- if (!SCI_WaitLowSCI(j))
- return 0;
-
- bytes.high = 0x06;
- bytes.low = j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_2[7];
- if (!daa_load(&bytes, j))
- return 0;
-
- bytes.high = j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_2[6];
- bytes.low = j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_2[5];
- if (!daa_load(&bytes, j))
- return 0;
-
- bytes.high = j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_2[4];
- bytes.low = j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_2[3];
- if (!daa_load(&bytes, j))
- return 0;
-
- bytes.high = j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_2[2];
- bytes.low = j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_2[1];
- if (!daa_load(&bytes, j))
- return 0;
-
- bytes.high = j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_2[0];
- bytes.low = 0x00;
- if (!daa_load(&bytes, j))
- return 0;
-
- if (!SCI_Control(j, SCI_End))
- return 0;
- if (!SCI_WaitLowSCI(j))
- return 0;
-
- bytes.high = 0x07;
- bytes.low = j->m_DAAShadowRegs.COP_REGS.COP.FRRFilterCoeff[7];
- if (!daa_load(&bytes, j))
- return 0;
-
- bytes.high = j->m_DAAShadowRegs.COP_REGS.COP.FRRFilterCoeff[6];
- bytes.low = j->m_DAAShadowRegs.COP_REGS.COP.FRRFilterCoeff[5];
- if (!daa_load(&bytes, j))
- return 0;
-
- bytes.high = j->m_DAAShadowRegs.COP_REGS.COP.FRRFilterCoeff[4];
- bytes.low = j->m_DAAShadowRegs.COP_REGS.COP.FRRFilterCoeff[3];
- if (!daa_load(&bytes, j))
- return 0;
-
- bytes.high = j->m_DAAShadowRegs.COP_REGS.COP.FRRFilterCoeff[2];
- bytes.low = j->m_DAAShadowRegs.COP_REGS.COP.FRRFilterCoeff[1];
- if (!daa_load(&bytes, j))
- return 0;
-
- bytes.high = j->m_DAAShadowRegs.COP_REGS.COP.FRRFilterCoeff[0];
- bytes.low = 0x00;
- if (!daa_load(&bytes, j))
- return 0;
-
- if (!SCI_Control(j, SCI_End))
- return 0;
- if (!SCI_WaitLowSCI(j))
- return 0;
-
- bytes.high = 0x08;
- bytes.low = j->m_DAAShadowRegs.COP_REGS.COP.FRXFilterCoeff[7];
- if (!daa_load(&bytes, j))
- return 0;
-
- bytes.high = j->m_DAAShadowRegs.COP_REGS.COP.FRXFilterCoeff[6];
- bytes.low = j->m_DAAShadowRegs.COP_REGS.COP.FRXFilterCoeff[5];
- if (!daa_load(&bytes, j))
- return 0;
-
- bytes.high = j->m_DAAShadowRegs.COP_REGS.COP.FRXFilterCoeff[4];
- bytes.low = j->m_DAAShadowRegs.COP_REGS.COP.FRXFilterCoeff[3];
- if (!daa_load(&bytes, j))
- return 0;
-
- bytes.high = j->m_DAAShadowRegs.COP_REGS.COP.FRXFilterCoeff[2];
- bytes.low = j->m_DAAShadowRegs.COP_REGS.COP.FRXFilterCoeff[1];
- if (!daa_load(&bytes, j))
- return 0;
-
- bytes.high = j->m_DAAShadowRegs.COP_REGS.COP.FRXFilterCoeff[0];
- bytes.low = 0x00;
- if (!daa_load(&bytes, j))
- return 0;
-
- if (!SCI_Control(j, SCI_End))
- return 0;
- if (!SCI_WaitLowSCI(j))
- return 0;
-
- bytes.high = 0x09;
- bytes.low = j->m_DAAShadowRegs.COP_REGS.COP.ARFilterCoeff[3];
- if (!daa_load(&bytes, j))
- return 0;
-
- bytes.high = j->m_DAAShadowRegs.COP_REGS.COP.ARFilterCoeff[2];
- bytes.low = j->m_DAAShadowRegs.COP_REGS.COP.ARFilterCoeff[1];
- if (!daa_load(&bytes, j))
- return 0;
-
- bytes.high = j->m_DAAShadowRegs.COP_REGS.COP.ARFilterCoeff[0];
- bytes.low = 0x00;
- if (!daa_load(&bytes, j))
- return 0;
-
- if (!SCI_Control(j, SCI_End))
- return 0;
- if (!SCI_WaitLowSCI(j))
- return 0;
-
- bytes.high = 0x0A;
- bytes.low = j->m_DAAShadowRegs.COP_REGS.COP.AXFilterCoeff[3];
- if (!daa_load(&bytes, j))
- return 0;
-
- bytes.high = j->m_DAAShadowRegs.COP_REGS.COP.AXFilterCoeff[2];
- bytes.low = j->m_DAAShadowRegs.COP_REGS.COP.AXFilterCoeff[1];
- if (!daa_load(&bytes, j))
- return 0;
-
- bytes.high = j->m_DAAShadowRegs.COP_REGS.COP.AXFilterCoeff[0];
- bytes.low = 0x00;
- if (!daa_load(&bytes, j))
- return 0;
-
- if (!SCI_Control(j, SCI_End))
- return 0;
- if (!SCI_WaitLowSCI(j))
- return 0;
-
- bytes.high = 0x0B;
- bytes.low = j->m_DAAShadowRegs.COP_REGS.COP.Tone1Coeff[3];
- if (!daa_load(&bytes, j))
- return 0;
-
- bytes.high = j->m_DAAShadowRegs.COP_REGS.COP.Tone1Coeff[2];
- bytes.low = j->m_DAAShadowRegs.COP_REGS.COP.Tone1Coeff[1];
- if (!daa_load(&bytes, j))
- return 0;
-
- bytes.high = j->m_DAAShadowRegs.COP_REGS.COP.Tone1Coeff[0];
- bytes.low = 0x00;
- if (!daa_load(&bytes, j))
- return 0;
-
- if (!SCI_Control(j, SCI_End))
- return 0;
- if (!SCI_WaitLowSCI(j))
- return 0;
-
- bytes.high = 0x0C;
- bytes.low = j->m_DAAShadowRegs.COP_REGS.COP.Tone2Coeff[3];
- if (!daa_load(&bytes, j))
- return 0;
-
- bytes.high = j->m_DAAShadowRegs.COP_REGS.COP.Tone2Coeff[2];
- bytes.low = j->m_DAAShadowRegs.COP_REGS.COP.Tone2Coeff[1];
- if (!daa_load(&bytes, j))
- return 0;
-
- bytes.high = j->m_DAAShadowRegs.COP_REGS.COP.Tone2Coeff[0];
- bytes.low = 0x00;
- if (!daa_load(&bytes, j))
- return 0;
-
- if (!SCI_Control(j, SCI_End))
- return 0;
- if (!SCI_WaitLowSCI(j))
- return 0;
-
- bytes.high = 0x0D;
- bytes.low = j->m_DAAShadowRegs.COP_REGS.COP.LevelmeteringRinging[3];
- if (!daa_load(&bytes, j))
- return 0;
-
- bytes.high = j->m_DAAShadowRegs.COP_REGS.COP.LevelmeteringRinging[2];
- bytes.low = j->m_DAAShadowRegs.COP_REGS.COP.LevelmeteringRinging[1];
- if (!daa_load(&bytes, j))
- return 0;
-
- bytes.high = j->m_DAAShadowRegs.COP_REGS.COP.LevelmeteringRinging[0];
- bytes.low = 0x00;
- if (!daa_load(&bytes, j))
- return 0;
-
- if (!SCI_Control(j, SCI_End))
- return 0;
- if (!SCI_WaitLowSCI(j))
- return 0;
-
- bytes.high = 0x0E;
- bytes.low = j->m_DAAShadowRegs.COP_REGS.COP.CallerID1stTone[7];
- if (!daa_load(&bytes, j))
- return 0;
-
- bytes.high = j->m_DAAShadowRegs.COP_REGS.COP.CallerID1stTone[6];
- bytes.low = j->m_DAAShadowRegs.COP_REGS.COP.CallerID1stTone[5];
- if (!daa_load(&bytes, j))
- return 0;
-
- bytes.high = j->m_DAAShadowRegs.COP_REGS.COP.CallerID1stTone[4];
- bytes.low = j->m_DAAShadowRegs.COP_REGS.COP.CallerID1stTone[3];
- if (!daa_load(&bytes, j))
- return 0;
-
- bytes.high = j->m_DAAShadowRegs.COP_REGS.COP.CallerID1stTone[2];
- bytes.low = j->m_DAAShadowRegs.COP_REGS.COP.CallerID1stTone[1];
- if (!daa_load(&bytes, j))
- return 0;
-
- bytes.high = j->m_DAAShadowRegs.COP_REGS.COP.CallerID1stTone[0];
- bytes.low = 0x00;
- if (!daa_load(&bytes, j))
- return 0;
-
- if (!SCI_Control(j, SCI_End))
- return 0;
- if (!SCI_WaitLowSCI(j))
- return 0;
-
- bytes.high = 0x0F;
- bytes.low = j->m_DAAShadowRegs.COP_REGS.COP.CallerID2ndTone[7];
- if (!daa_load(&bytes, j))
- return 0;
-
- bytes.high = j->m_DAAShadowRegs.COP_REGS.COP.CallerID2ndTone[6];
- bytes.low = j->m_DAAShadowRegs.COP_REGS.COP.CallerID2ndTone[5];
- if (!daa_load(&bytes, j))
- return 0;
-
- bytes.high = j->m_DAAShadowRegs.COP_REGS.COP.CallerID2ndTone[4];
- bytes.low = j->m_DAAShadowRegs.COP_REGS.COP.CallerID2ndTone[3];
- if (!daa_load(&bytes, j))
- return 0;
-
- bytes.high = j->m_DAAShadowRegs.COP_REGS.COP.CallerID2ndTone[2];
- bytes.low = j->m_DAAShadowRegs.COP_REGS.COP.CallerID2ndTone[1];
- if (!daa_load(&bytes, j))
- return 0;
-
- bytes.high = j->m_DAAShadowRegs.COP_REGS.COP.CallerID2ndTone[0];
- bytes.low = 0x00;
- if (!daa_load(&bytes, j))
- return 0;
-
- udelay(32);
- j->pld_scrr.byte = inb_p(j->XILINXbase);
- if (!SCI_Control(j, SCI_End))
- return 0;
-
- outb_p(j->pld_scrw.byte, j->XILINXbase);
-
- if (ixjdebug & 0x0002)
- printk("DAA Coefficients Loaded\n");
-
- j->flags.pstncheck = 0;
- return 1;
-}
-
-static int ixj_set_tone_off(unsigned short arg, IXJ *j)
-{
- j->tone_off_time = arg;
- if (ixj_WriteDSPCommand(0x6E05, j)) /* Set Tone Off Period */
-
- return -1;
- if (ixj_WriteDSPCommand(arg, j))
- return -1;
- return 0;
-}
-
-static int ixj_get_tone_on(IXJ *j)
-{
- if (ixj_WriteDSPCommand(0x6E06, j)) /* Get Tone On Period */
-
- return -1;
- return 0;
-}
-
-static int ixj_get_tone_off(IXJ *j)
-{
- if (ixj_WriteDSPCommand(0x6E07, j)) /* Get Tone Off Period */
-
- return -1;
- return 0;
-}
-
-static void ixj_busytone(IXJ *j)
-{
- j->flags.ringback = 0;
- j->flags.dialtone = 0;
- j->flags.busytone = 1;
- ixj_set_tone_on(0x07D0, j);
- ixj_set_tone_off(0x07D0, j);
- ixj_play_tone(j, 27);
-}
-
-static void ixj_dialtone(IXJ *j)
-{
- j->flags.ringback = 0;
- j->flags.dialtone = 1;
- j->flags.busytone = 0;
- if (j->dsp.low == 0x20) {
- return;
- } else {
- ixj_set_tone_on(0xFFFF, j);
- ixj_set_tone_off(0x0000, j);
- ixj_play_tone(j, 25);
- }
-}
-
-static void ixj_cpt_stop(IXJ *j)
-{
- if(j->tone_state || j->tone_cadence_state)
- {
- j->flags.dialtone = 0;
- j->flags.busytone = 0;
- j->flags.ringback = 0;
- ixj_set_tone_on(0x0001, j);
- ixj_set_tone_off(0x0000, j);
- ixj_play_tone(j, 0);
- j->tone_state = j->tone_cadence_state = 0;
- if (j->cadence_t) {
- kfree(j->cadence_t->ce);
- kfree(j->cadence_t);
- j->cadence_t = NULL;
- }
- }
- if (j->play_mode == -1 && j->rec_mode == -1)
- idle(j);
- if (j->play_mode != -1 && j->dsp.low == 0x20)
- ixj_play_start(j);
- if (j->rec_mode != -1 && j->dsp.low == 0x20)
- ixj_record_start(j);
-}
-
-static void ixj_ringback(IXJ *j)
-{
- j->flags.busytone = 0;
- j->flags.dialtone = 0;
- j->flags.ringback = 1;
- ixj_set_tone_on(0x0FA0, j);
- ixj_set_tone_off(0x2EE0, j);
- ixj_play_tone(j, 26);
-}
-
-static void ixj_testram(IXJ *j)
-{
- ixj_WriteDSPCommand(0x3001, j); /* Test External SRAM */
-}
-
-static int ixj_build_cadence(IXJ *j, IXJ_CADENCE __user * cp)
-{
- ixj_cadence *lcp;
- IXJ_CADENCE_ELEMENT __user *cep;
- IXJ_CADENCE_ELEMENT *lcep;
- IXJ_TONE ti;
- int err;
-
- lcp = kmalloc(sizeof(ixj_cadence), GFP_KERNEL);
- if (lcp == NULL)
- return -ENOMEM;
-
- err = -EFAULT;
- if (copy_from_user(&lcp->elements_used,
- &cp->elements_used, sizeof(int)))
- goto out;
- if (copy_from_user(&lcp->termination,
- &cp->termination, sizeof(IXJ_CADENCE_TERM)))
- goto out;
- if (get_user(cep, &cp->ce))
- goto out;
-
- err = -EINVAL;
- if ((unsigned)lcp->elements_used >= ~0U/sizeof(IXJ_CADENCE_ELEMENT))
- goto out;
-
- err = -ENOMEM;
- lcep = kmalloc(sizeof(IXJ_CADENCE_ELEMENT) * lcp->elements_used, GFP_KERNEL);
- if (!lcep)
- goto out;
-
- err = -EFAULT;
- if (copy_from_user(lcep, cep, sizeof(IXJ_CADENCE_ELEMENT) * lcp->elements_used))
- goto out1;
-
- if (j->cadence_t) {
- kfree(j->cadence_t->ce);
- kfree(j->cadence_t);
- }
- lcp->ce = (void *) lcep;
- j->cadence_t = lcp;
- j->tone_cadence_state = 0;
- ixj_set_tone_on(lcp->ce[0].tone_on_time, j);
- ixj_set_tone_off(lcp->ce[0].tone_off_time, j);
- if (j->cadence_t->ce[j->tone_cadence_state].freq0) {
- ti.tone_index = j->cadence_t->ce[j->tone_cadence_state].index;
- ti.freq0 = j->cadence_t->ce[j->tone_cadence_state].freq0;
- ti.gain0 = j->cadence_t->ce[j->tone_cadence_state].gain0;
- ti.freq1 = j->cadence_t->ce[j->tone_cadence_state].freq1;
- ti.gain1 = j->cadence_t->ce[j->tone_cadence_state].gain1;
- ixj_init_tone(j, &ti);
- }
- ixj_play_tone(j, lcp->ce[0].index);
- return 1;
-out1:
- kfree(lcep);
-out:
- kfree(lcp);
- return err;
-}
-
-static int ixj_build_filter_cadence(IXJ *j, IXJ_FILTER_CADENCE __user * cp)
-{
- IXJ_FILTER_CADENCE *lcp;
- lcp = memdup_user(cp, sizeof(IXJ_FILTER_CADENCE));
- if (IS_ERR(lcp)) {
- if(ixjdebug & 0x0001) {
- printk(KERN_INFO "Could not allocate memory for cadence or could not copy cadence to kernel\n");
- }
- return PTR_ERR(lcp);
- }
- if (lcp->filter > 5) {
- if(ixjdebug & 0x0001) {
- printk(KERN_INFO "Cadence out of range\n");
- }
- kfree(lcp);
- return -1;
- }
- j->cadence_f[lcp->filter].state = 0;
- j->cadence_f[lcp->filter].enable = lcp->enable;
- j->filter_en[lcp->filter] = j->cadence_f[lcp->filter].en_filter = lcp->en_filter;
- j->cadence_f[lcp->filter].on1 = lcp->on1;
- j->cadence_f[lcp->filter].on1min = 0;
- j->cadence_f[lcp->filter].on1max = 0;
- j->cadence_f[lcp->filter].off1 = lcp->off1;
- j->cadence_f[lcp->filter].off1min = 0;
- j->cadence_f[lcp->filter].off1max = 0;
- j->cadence_f[lcp->filter].on2 = lcp->on2;
- j->cadence_f[lcp->filter].on2min = 0;
- j->cadence_f[lcp->filter].on2max = 0;
- j->cadence_f[lcp->filter].off2 = lcp->off2;
- j->cadence_f[lcp->filter].off2min = 0;
- j->cadence_f[lcp->filter].off2max = 0;
- j->cadence_f[lcp->filter].on3 = lcp->on3;
- j->cadence_f[lcp->filter].on3min = 0;
- j->cadence_f[lcp->filter].on3max = 0;
- j->cadence_f[lcp->filter].off3 = lcp->off3;
- j->cadence_f[lcp->filter].off3min = 0;
- j->cadence_f[lcp->filter].off3max = 0;
- if(ixjdebug & 0x0002) {
- printk(KERN_INFO "Cadence %d loaded\n", lcp->filter);
- }
- kfree(lcp);
- return 0;
-}
-
-static void add_caps(IXJ *j)
-{
- j->caps = 0;
- j->caplist[j->caps].cap = PHONE_VENDOR_QUICKNET;
- strcpy(j->caplist[j->caps].desc, "Quicknet Technologies, Inc. (www.quicknet.net)");
- j->caplist[j->caps].captype = vendor;
- j->caplist[j->caps].handle = j->caps;
- j->caps++;
- j->caplist[j->caps].captype = device;
- switch (j->cardtype) {
- case QTI_PHONEJACK:
- strcpy(j->caplist[j->caps].desc, "Quicknet Internet PhoneJACK");
- break;
- case QTI_LINEJACK:
- strcpy(j->caplist[j->caps].desc, "Quicknet Internet LineJACK");
- break;
- case QTI_PHONEJACK_LITE:
- strcpy(j->caplist[j->caps].desc, "Quicknet Internet PhoneJACK Lite");
- break;
- case QTI_PHONEJACK_PCI:
- strcpy(j->caplist[j->caps].desc, "Quicknet Internet PhoneJACK PCI");
- break;
- case QTI_PHONECARD:
- strcpy(j->caplist[j->caps].desc, "Quicknet Internet PhoneCARD");
- break;
- }
- j->caplist[j->caps].cap = j->cardtype;
- j->caplist[j->caps].handle = j->caps;
- j->caps++;
- strcpy(j->caplist[j->caps].desc, "POTS");
- j->caplist[j->caps].captype = port;
- j->caplist[j->caps].cap = pots;
- j->caplist[j->caps].handle = j->caps;
- j->caps++;
-
- /* add devices that can do speaker/mic */
- switch (j->cardtype) {
- case QTI_PHONEJACK:
- case QTI_LINEJACK:
- case QTI_PHONEJACK_PCI:
- case QTI_PHONECARD:
- strcpy(j->caplist[j->caps].desc, "SPEAKER");
- j->caplist[j->caps].captype = port;
- j->caplist[j->caps].cap = speaker;
- j->caplist[j->caps].handle = j->caps;
- j->caps++;
- default:
- break;
- }
-
- /* add devices that can do handset */
- switch (j->cardtype) {
- case QTI_PHONEJACK:
- strcpy(j->caplist[j->caps].desc, "HANDSET");
- j->caplist[j->caps].captype = port;
- j->caplist[j->caps].cap = handset;
- j->caplist[j->caps].handle = j->caps;
- j->caps++;
- break;
- default:
- break;
- }
-
- /* add devices that can do PSTN */
- switch (j->cardtype) {
- case QTI_LINEJACK:
- strcpy(j->caplist[j->caps].desc, "PSTN");
- j->caplist[j->caps].captype = port;
- j->caplist[j->caps].cap = pstn;
- j->caplist[j->caps].handle = j->caps;
- j->caps++;
- break;
- default:
- break;
- }
-
- /* add codecs - all cards can do uLaw, linear 8/16, and Windows sound system */
- strcpy(j->caplist[j->caps].desc, "ULAW");
- j->caplist[j->caps].captype = codec;
- j->caplist[j->caps].cap = ULAW;
- j->caplist[j->caps].handle = j->caps;
- j->caps++;
-
- strcpy(j->caplist[j->caps].desc, "LINEAR 16 bit");
- j->caplist[j->caps].captype = codec;
- j->caplist[j->caps].cap = LINEAR16;
- j->caplist[j->caps].handle = j->caps;
- j->caps++;
-
- strcpy(j->caplist[j->caps].desc, "LINEAR 8 bit");
- j->caplist[j->caps].captype = codec;
- j->caplist[j->caps].cap = LINEAR8;
- j->caplist[j->caps].handle = j->caps;
- j->caps++;
-
- strcpy(j->caplist[j->caps].desc, "Windows Sound System");
- j->caplist[j->caps].captype = codec;
- j->caplist[j->caps].cap = WSS;
- j->caplist[j->caps].handle = j->caps;
- j->caps++;
-
- /* software ALAW codec, made from ULAW */
- strcpy(j->caplist[j->caps].desc, "ALAW");
- j->caplist[j->caps].captype = codec;
- j->caplist[j->caps].cap = ALAW;
- j->caplist[j->caps].handle = j->caps;
- j->caps++;
-
- /* version 12 of the 8020 does the following codecs in a broken way */
- if (j->dsp.low != 0x20 || j->ver.low != 0x12) {
- strcpy(j->caplist[j->caps].desc, "G.723.1 6.3kbps");
- j->caplist[j->caps].captype = codec;
- j->caplist[j->caps].cap = G723_63;
- j->caplist[j->caps].handle = j->caps;
- j->caps++;
-
- strcpy(j->caplist[j->caps].desc, "G.723.1 5.3kbps");
- j->caplist[j->caps].captype = codec;
- j->caplist[j->caps].cap = G723_53;
- j->caplist[j->caps].handle = j->caps;
- j->caps++;
-
- strcpy(j->caplist[j->caps].desc, "TrueSpeech 4.8kbps");
- j->caplist[j->caps].captype = codec;
- j->caplist[j->caps].cap = TS48;
- j->caplist[j->caps].handle = j->caps;
- j->caps++;
-
- strcpy(j->caplist[j->caps].desc, "TrueSpeech 4.1kbps");
- j->caplist[j->caps].captype = codec;
- j->caplist[j->caps].cap = TS41;
- j->caplist[j->caps].handle = j->caps;
- j->caps++;
- }
-
- /* 8020 chips can do TS8.5 native, and 8021/8022 can load it */
- if (j->dsp.low == 0x20 || j->flags.ts85_loaded) {
- strcpy(j->caplist[j->caps].desc, "TrueSpeech 8.5kbps");
- j->caplist[j->caps].captype = codec;
- j->caplist[j->caps].cap = TS85;
- j->caplist[j->caps].handle = j->caps;
- j->caps++;
- }
-
- /* 8021 chips can do G728 */
- if (j->dsp.low == 0x21) {
- strcpy(j->caplist[j->caps].desc, "G.728 16kbps");
- j->caplist[j->caps].captype = codec;
- j->caplist[j->caps].cap = G728;
- j->caplist[j->caps].handle = j->caps;
- j->caps++;
- }
-
- /* 8021/8022 chips can do G729 if loaded */
- if (j->dsp.low != 0x20 && j->flags.g729_loaded) {
- strcpy(j->caplist[j->caps].desc, "G.729A 8kbps");
- j->caplist[j->caps].captype = codec;
- j->caplist[j->caps].cap = G729;
- j->caplist[j->caps].handle = j->caps;
- j->caps++;
- }
- if (j->dsp.low != 0x20 && j->flags.g729_loaded) {
- strcpy(j->caplist[j->caps].desc, "G.729B 8kbps");
- j->caplist[j->caps].captype = codec;
- j->caplist[j->caps].cap = G729B;
- j->caplist[j->caps].handle = j->caps;
- j->caps++;
- }
-}
-
-static int capabilities_check(IXJ *j, struct phone_capability *pcreq)
-{
- int cnt;
- int retval = 0;
- for (cnt = 0; cnt < j->caps; cnt++) {
- if (pcreq->captype == j->caplist[cnt].captype
- && pcreq->cap == j->caplist[cnt].cap) {
- retval = 1;
- break;
- }
- }
- return retval;
-}
-
-static long do_ixj_ioctl(struct file *file_p, unsigned int cmd, unsigned long arg)
-{
- IXJ_TONE ti;
- IXJ_FILTER jf;
- IXJ_FILTER_RAW jfr;
- void __user *argp = (void __user *)arg;
- struct inode *inode = file_p->f_path.dentry->d_inode;
- unsigned int minor = iminor(inode);
- unsigned int raise, mant;
- int board = NUM(inode);
-
- IXJ *j = get_ixj(NUM(inode));
-
- int retval = 0;
-
- /*
- * Set up locks to ensure that only one process is talking to the DSP at a time.
- * This is necessary to keep the DSP from locking up.
- */
- while(test_and_set_bit(board, (void *)&j->busyflags) != 0)
- schedule_timeout_interruptible(1);
- if (ixjdebug & 0x0040)
- printk("phone%d ioctl, cmd: 0x%x, arg: 0x%lx\n", minor, cmd, arg);
- if (minor >= IXJMAX) {
- clear_bit(board, &j->busyflags);
- return -ENODEV;
- }
- /*
- * Check ioctls only root can use.
- */
- if (!capable(CAP_SYS_ADMIN)) {
- switch (cmd) {
- case IXJCTL_TESTRAM:
- case IXJCTL_HZ:
- retval = -EPERM;
- }
- }
- switch (cmd) {
- case IXJCTL_TESTRAM:
- ixj_testram(j);
- retval = (j->ssr.high << 8) + j->ssr.low;
- break;
- case IXJCTL_CARDTYPE:
- retval = j->cardtype;
- break;
- case IXJCTL_SERIAL:
- retval = j->serial;
- break;
- case IXJCTL_VERSION:
- {
- char arg_str[100];
- snprintf(arg_str, sizeof(arg_str),
- "\nDriver version %i.%i.%i", IXJ_VER_MAJOR,
- IXJ_VER_MINOR, IXJ_BLD_VER);
- if (copy_to_user(argp, arg_str, strlen(arg_str)))
- retval = -EFAULT;
- }
- break;
- case PHONE_RING_CADENCE:
- j->ring_cadence = arg;
- break;
- case IXJCTL_CIDCW:
- if(arg) {
- if (copy_from_user(&j->cid_send, argp, sizeof(PHONE_CID))) {
- retval = -EFAULT;
- break;
- }
- } else {
- memset(&j->cid_send, 0, sizeof(PHONE_CID));
- }
- ixj_write_cidcw(j);
- break;
- /* Binary compatbility */
- case OLD_PHONE_RING_START:
- arg = 0;
- /* Fall through */
- case PHONE_RING_START:
- if(arg) {
- if (copy_from_user(&j->cid_send, argp, sizeof(PHONE_CID))) {
- retval = -EFAULT;
- break;
- }
- ixj_write_cid(j);
- } else {
- memset(&j->cid_send, 0, sizeof(PHONE_CID));
- }
- ixj_ring_start(j);
- break;
- case PHONE_RING_STOP:
- j->flags.cringing = 0;
- if(j->cadence_f[5].enable) {
- j->cadence_f[5].state = 0;
- }
- ixj_ring_off(j);
- break;
- case PHONE_RING:
- retval = ixj_ring(j);
- break;
- case PHONE_EXCEPTION:
- retval = j->ex.bytes;
- if(j->ex.bits.flash) {
- j->flash_end = 0;
- j->ex.bits.flash = 0;
- }
- j->ex.bits.pstn_ring = 0;
- j->ex.bits.caller_id = 0;
- j->ex.bits.pstn_wink = 0;
- j->ex.bits.f0 = 0;
- j->ex.bits.f1 = 0;
- j->ex.bits.f2 = 0;
- j->ex.bits.f3 = 0;
- j->ex.bits.fc0 = 0;
- j->ex.bits.fc1 = 0;
- j->ex.bits.fc2 = 0;
- j->ex.bits.fc3 = 0;
- j->ex.bits.reserved = 0;
- break;
- case PHONE_HOOKSTATE:
- j->ex.bits.hookstate = 0;
- retval = j->hookstate; //j->r_hook;
- break;
- case IXJCTL_SET_LED:
- LED_SetState(arg, j);
- break;
- case PHONE_FRAME:
- retval = set_base_frame(j, arg);
- break;
- case PHONE_REC_CODEC:
- retval = set_rec_codec(j, arg);
- break;
- case PHONE_VAD:
- ixj_vad(j, arg);
- break;
- case PHONE_REC_START:
- ixj_record_start(j);
- break;
- case PHONE_REC_STOP:
- ixj_record_stop(j);
- break;
- case PHONE_REC_DEPTH:
- set_rec_depth(j, arg);
- break;
- case PHONE_REC_VOLUME:
- if(arg == -1) {
- retval = get_rec_volume(j);
- }
- else {
- set_rec_volume(j, arg);
- retval = arg;
- }
- break;
- case PHONE_REC_VOLUME_LINEAR:
- if(arg == -1) {
- retval = get_rec_volume_linear(j);
- }
- else {
- set_rec_volume_linear(j, arg);
- retval = arg;
- }
- break;
- case IXJCTL_DTMF_PRESCALE:
- if(arg == -1) {
- retval = get_dtmf_prescale(j);
- }
- else {
- set_dtmf_prescale(j, arg);
- retval = arg;
- }
- break;
- case PHONE_REC_LEVEL:
- retval = get_rec_level(j);
- break;
- case IXJCTL_SC_RXG:
- retval = ixj_siadc(j, arg);
- break;
- case IXJCTL_SC_TXG:
- retval = ixj_sidac(j, arg);
- break;
- case IXJCTL_AEC_START:
- ixj_aec_start(j, arg);
- break;
- case IXJCTL_AEC_STOP:
- aec_stop(j);
- break;
- case IXJCTL_AEC_GET_LEVEL:
- retval = j->aec_level;
- break;
- case PHONE_PLAY_CODEC:
- retval = set_play_codec(j, arg);
- break;
- case PHONE_PLAY_START:
- retval = ixj_play_start(j);
- break;
- case PHONE_PLAY_STOP:
- ixj_play_stop(j);
- break;
- case PHONE_PLAY_DEPTH:
- set_play_depth(j, arg);
- break;
- case PHONE_PLAY_VOLUME:
- if(arg == -1) {
- retval = get_play_volume(j);
- }
- else {
- set_play_volume(j, arg);
- retval = arg;
- }
- break;
- case PHONE_PLAY_VOLUME_LINEAR:
- if(arg == -1) {
- retval = get_play_volume_linear(j);
- }
- else {
- set_play_volume_linear(j, arg);
- retval = arg;
- }
- break;
- case PHONE_PLAY_LEVEL:
- retval = get_play_level(j);
- break;
- case IXJCTL_DSP_TYPE:
- retval = (j->dsp.high << 8) + j->dsp.low;
- break;
- case IXJCTL_DSP_VERSION:
- retval = (j->ver.high << 8) + j->ver.low;
- break;
- case IXJCTL_HZ:
- hertz = arg;
- break;
- case IXJCTL_RATE:
- if (arg > hertz)
- retval = -1;
- else
- samplerate = arg;
- break;
- case IXJCTL_DRYBUFFER_READ:
- put_user(j->drybuffer, (unsigned long __user *) argp);
- break;
- case IXJCTL_DRYBUFFER_CLEAR:
- j->drybuffer = 0;
- break;
- case IXJCTL_FRAMES_READ:
- put_user(j->framesread, (unsigned long __user *) argp);
- break;
- case IXJCTL_FRAMES_WRITTEN:
- put_user(j->frameswritten, (unsigned long __user *) argp);
- break;
- case IXJCTL_READ_WAIT:
- put_user(j->read_wait, (unsigned long __user *) argp);
- break;
- case IXJCTL_WRITE_WAIT:
- put_user(j->write_wait, (unsigned long __user *) argp);
- break;
- case PHONE_MAXRINGS:
- j->maxrings = arg;
- break;
- case PHONE_SET_TONE_ON_TIME:
- ixj_set_tone_on(arg, j);
- break;
- case PHONE_SET_TONE_OFF_TIME:
- ixj_set_tone_off(arg, j);
- break;
- case PHONE_GET_TONE_ON_TIME:
- if (ixj_get_tone_on(j)) {
- retval = -1;
- } else {
- retval = (j->ssr.high << 8) + j->ssr.low;
- }
- break;
- case PHONE_GET_TONE_OFF_TIME:
- if (ixj_get_tone_off(j)) {
- retval = -1;
- } else {
- retval = (j->ssr.high << 8) + j->ssr.low;
- }
- break;
- case PHONE_PLAY_TONE:
- if (!j->tone_state)
- retval = ixj_play_tone(j, arg);
- else
- retval = -1;
- break;
- case PHONE_GET_TONE_STATE:
- retval = j->tone_state;
- break;
- case PHONE_DTMF_READY:
- retval = j->ex.bits.dtmf_ready;
- break;
- case PHONE_GET_DTMF:
- if (ixj_hookstate(j)) {
- if (j->dtmf_rp != j->dtmf_wp) {
- retval = j->dtmfbuffer[j->dtmf_rp];
- j->dtmf_rp++;
- if (j->dtmf_rp == 79)
- j->dtmf_rp = 0;
- if (j->dtmf_rp == j->dtmf_wp) {
- j->ex.bits.dtmf_ready = j->dtmf_rp = j->dtmf_wp = 0;
- }
- }
- }
- break;
- case PHONE_GET_DTMF_ASCII:
- if (ixj_hookstate(j)) {
- if (j->dtmf_rp != j->dtmf_wp) {
- switch (j->dtmfbuffer[j->dtmf_rp]) {
- case 10:
- retval = 42; /* '*'; */
-
- break;
- case 11:
- retval = 48; /*'0'; */
-
- break;
- case 12:
- retval = 35; /*'#'; */
-
- break;
- case 28:
- retval = 65; /*'A'; */
-
- break;
- case 29:
- retval = 66; /*'B'; */
-
- break;
- case 30:
- retval = 67; /*'C'; */
-
- break;
- case 31:
- retval = 68; /*'D'; */
-
- break;
- default:
- retval = 48 + j->dtmfbuffer[j->dtmf_rp];
- break;
- }
- j->dtmf_rp++;
- if (j->dtmf_rp == 79)
- j->dtmf_rp = 0;
- if(j->dtmf_rp == j->dtmf_wp)
- {
- j->ex.bits.dtmf_ready = j->dtmf_rp = j->dtmf_wp = 0;
- }
- }
- }
- break;
- case PHONE_DTMF_OOB:
- j->flags.dtmf_oob = arg;
- break;
- case PHONE_DIALTONE:
- ixj_dialtone(j);
- break;
- case PHONE_BUSY:
- ixj_busytone(j);
- break;
- case PHONE_RINGBACK:
- ixj_ringback(j);
- break;
- case PHONE_WINK:
- if(j->cardtype == QTI_PHONEJACK)
- retval = -1;
- else
- retval = ixj_wink(j);
- break;
- case PHONE_CPT_STOP:
- ixj_cpt_stop(j);
- break;
- case PHONE_QUERY_CODEC:
- {
- struct phone_codec_data pd;
- int val;
- int proto_size[] = {
- -1,
- 12, 10, 16, 9, 8, 48, 5,
- 40, 40, 80, 40, 40, 6
- };
- if(copy_from_user(&pd, argp, sizeof(pd))) {
- retval = -EFAULT;
- break;
- }
- if(pd.type<1 || pd.type>13) {
- retval = -EPROTONOSUPPORT;
- break;
- }
- if(pd.type<G729)
- val=proto_size[pd.type];
- else switch(j->baseframe.low)
- {
- case 0xA0:val=2*proto_size[pd.type];break;
- case 0x50:val=proto_size[pd.type];break;
- default:val=proto_size[pd.type]*3;break;
- }
- pd.buf_min=pd.buf_max=pd.buf_opt=val;
- if(copy_to_user(argp, &pd, sizeof(pd)))
- retval = -EFAULT;
- break;
- }
- case IXJCTL_DSP_IDLE:
- idle(j);
- break;
- case IXJCTL_MIXER:
- if ((arg & 0xff) == 0xff)
- retval = ixj_get_mixer(arg, j);
- else
- ixj_mixer(arg, j);
- break;
- case IXJCTL_DAA_COEFF_SET:
- switch (arg) {
- case DAA_US:
- DAA_Coeff_US(j);
- retval = ixj_daa_write(j);
- break;
- case DAA_UK:
- DAA_Coeff_UK(j);
- retval = ixj_daa_write(j);
- break;
- case DAA_FRANCE:
- DAA_Coeff_France(j);
- retval = ixj_daa_write(j);
- break;
- case DAA_GERMANY:
- DAA_Coeff_Germany(j);
- retval = ixj_daa_write(j);
- break;
- case DAA_AUSTRALIA:
- DAA_Coeff_Australia(j);
- retval = ixj_daa_write(j);
- break;
- case DAA_JAPAN:
- DAA_Coeff_Japan(j);
- retval = ixj_daa_write(j);
- break;
- default:
- retval = 1;
- break;
- }
- break;
- case IXJCTL_DAA_AGAIN:
- ixj_daa_cr4(j, arg | 0x02);
- break;
- case IXJCTL_PSTN_LINETEST:
- retval = ixj_linetest(j);
- break;
- case IXJCTL_VMWI:
- ixj_write_vmwi(j, arg);
- break;
- case IXJCTL_CID:
- if (copy_to_user(argp, &j->cid, sizeof(PHONE_CID)))
- retval = -EFAULT;
- j->ex.bits.caller_id = 0;
- break;
- case IXJCTL_WINK_DURATION:
- j->winktime = arg;
- break;
- case IXJCTL_PORT:
- if (arg)
- retval = ixj_set_port(j, arg);
- else
- retval = j->port;
- break;
- case IXJCTL_POTS_PSTN:
- retval = ixj_set_pots(j, arg);
- break;
- case PHONE_CAPABILITIES:
- add_caps(j);
- retval = j->caps;
- break;
- case PHONE_CAPABILITIES_LIST:
- add_caps(j);
- if (copy_to_user(argp, j->caplist, sizeof(struct phone_capability) * j->caps))
- retval = -EFAULT;
- break;
- case PHONE_CAPABILITIES_CHECK:
- {
- struct phone_capability cap;
- if (copy_from_user(&cap, argp, sizeof(cap)))
- retval = -EFAULT;
- else {
- add_caps(j);
- retval = capabilities_check(j, &cap);
- }
- }
- break;
- case PHONE_PSTN_SET_STATE:
- daa_set_mode(j, arg);
- break;
- case PHONE_PSTN_GET_STATE:
- retval = j->daa_mode;
- j->ex.bits.pstn_ring = 0;
- break;
- case IXJCTL_SET_FILTER:
- if (copy_from_user(&jf, argp, sizeof(jf)))
- retval = -EFAULT;
- else
- retval = ixj_init_filter(j, &jf);
- break;
- case IXJCTL_SET_FILTER_RAW:
- if (copy_from_user(&jfr, argp, sizeof(jfr)))
- retval = -EFAULT;
- else
- retval = ixj_init_filter_raw(j, &jfr);
- break;
- case IXJCTL_GET_FILTER_HIST:
- if(arg<0||arg>3)
- retval = -EINVAL;
- else
- retval = j->filter_hist[arg];
- break;
- case IXJCTL_INIT_TONE:
- if (copy_from_user(&ti, argp, sizeof(ti)))
- retval = -EFAULT;
- else
- retval = ixj_init_tone(j, &ti);
- break;
- case IXJCTL_TONE_CADENCE:
- retval = ixj_build_cadence(j, argp);
- break;
- case IXJCTL_FILTER_CADENCE:
- retval = ixj_build_filter_cadence(j, argp);
- break;
- case IXJCTL_SIGCTL:
- if (copy_from_user(&j->sigdef, argp, sizeof(IXJ_SIGDEF))) {
- retval = -EFAULT;
- break;
- }
- j->ixj_signals[j->sigdef.event] = j->sigdef.signal;
- if(j->sigdef.event < 33) {
- raise = 1;
- for(mant = 0; mant < j->sigdef.event; mant++){
- raise *= 2;
- }
- if(j->sigdef.signal)
- j->ex_sig.bytes |= raise;
- else
- j->ex_sig.bytes &= (raise^0xffff);
- }
- break;
- case IXJCTL_INTERCOM_STOP:
- if(arg < 0 || arg >= IXJMAX)
- return -EINVAL;
- j->intercom = -1;
- ixj_record_stop(j);
- ixj_play_stop(j);
- idle(j);
- get_ixj(arg)->intercom = -1;
- ixj_record_stop(get_ixj(arg));
- ixj_play_stop(get_ixj(arg));
- idle(get_ixj(arg));
- break;
- case IXJCTL_INTERCOM_START:
- if(arg < 0 || arg >= IXJMAX)
- return -EINVAL;
- j->intercom = arg;
- ixj_record_start(j);
- ixj_play_start(j);
- get_ixj(arg)->intercom = board;
- ixj_play_start(get_ixj(arg));
- ixj_record_start(get_ixj(arg));
- break;
- }
- if (ixjdebug & 0x0040)
- printk("phone%d ioctl end, cmd: 0x%x, arg: 0x%lx\n", minor, cmd, arg);
- clear_bit(board, &j->busyflags);
- return retval;
-}
-
-static long ixj_ioctl(struct file *file_p, unsigned int cmd, unsigned long arg)
-{
- long ret;
- mutex_lock(&ixj_mutex);
- ret = do_ixj_ioctl(file_p, cmd, arg);
- mutex_unlock(&ixj_mutex);
- return ret;
-}
-
-static int ixj_fasync(int fd, struct file *file_p, int mode)
-{
- IXJ *j = get_ixj(NUM(file_p->f_path.dentry->d_inode));
-
- return fasync_helper(fd, file_p, mode, &j->async_queue);
-}
-
-static const struct file_operations ixj_fops =
-{
- .owner = THIS_MODULE,
- .read = ixj_enhanced_read,
- .write = ixj_enhanced_write,
- .poll = ixj_poll,
- .unlocked_ioctl = ixj_ioctl,
- .release = ixj_release,
- .fasync = ixj_fasync,
- .llseek = default_llseek,
-};
-
-static int ixj_linetest(IXJ *j)
-{
- j->flags.pstncheck = 1; /* Testing */
- j->flags.pstn_present = 0; /* Assume the line is not there */
-
- daa_int_read(j); /*Clear DAA Interrupt flags */
- /* */
- /* Hold all relays in the normally de-energized position. */
- /* */
-
- j->pld_slicw.bits.rly1 = 0;
- j->pld_slicw.bits.rly2 = 0;
- j->pld_slicw.bits.rly3 = 0;
- outb_p(j->pld_slicw.byte, j->XILINXbase + 0x01);
- j->pld_scrw.bits.daafsyncen = 0; /* Turn off DAA Frame Sync */
-
- outb_p(j->pld_scrw.byte, j->XILINXbase);
- j->pld_slicr.byte = inb_p(j->XILINXbase + 0x01);
- if (j->pld_slicr.bits.potspstn) {
- j->flags.pots_pstn = 1;
- j->flags.pots_correct = 0;
- LED_SetState(0x4, j);
- } else {
- j->flags.pots_pstn = 0;
- j->pld_slicw.bits.rly1 = 0;
- j->pld_slicw.bits.rly2 = 0;
- j->pld_slicw.bits.rly3 = 1;
- outb_p(j->pld_slicw.byte, j->XILINXbase + 0x01);
- j->pld_scrw.bits.daafsyncen = 0; /* Turn off DAA Frame Sync */
-
- outb_p(j->pld_scrw.byte, j->XILINXbase);
- daa_set_mode(j, SOP_PU_CONVERSATION);
- msleep(1000);
- daa_int_read(j);
- daa_set_mode(j, SOP_PU_RESET);
- if (j->m_DAAShadowRegs.XOP_REGS.XOP.xr0.bitreg.VDD_OK) {
- j->flags.pots_correct = 0; /* Should not be line voltage on POTS port. */
- LED_SetState(0x4, j);
- j->pld_slicw.bits.rly3 = 0;
- outb_p(j->pld_slicw.byte, j->XILINXbase + 0x01);
- } else {
- j->flags.pots_correct = 1;
- LED_SetState(0x8, j);
- j->pld_slicw.bits.rly1 = 1;
- j->pld_slicw.bits.rly2 = 0;
- j->pld_slicw.bits.rly3 = 0;
- outb_p(j->pld_slicw.byte, j->XILINXbase + 0x01);
- }
- }
- j->pld_slicw.bits.rly3 = 0;
- outb_p(j->pld_slicw.byte, j->XILINXbase + 0x01);
- daa_set_mode(j, SOP_PU_CONVERSATION);
- msleep(1000);
- daa_int_read(j);
- daa_set_mode(j, SOP_PU_RESET);
- if (j->m_DAAShadowRegs.XOP_REGS.XOP.xr0.bitreg.VDD_OK) {
- j->pstn_sleeptil = jiffies + (hertz / 4);
- j->flags.pstn_present = 1;
- } else {
- j->flags.pstn_present = 0;
- }
- if (j->flags.pstn_present) {
- if (j->flags.pots_correct) {
- LED_SetState(0xA, j);
- } else {
- LED_SetState(0x6, j);
- }
- } else {
- if (j->flags.pots_correct) {
- LED_SetState(0x9, j);
- } else {
- LED_SetState(0x5, j);
- }
- }
- j->flags.pstncheck = 0; /* Testing */
- return j->flags.pstn_present;
-}
-
-static int ixj_selfprobe(IXJ *j)
-{
- unsigned short cmd;
- int cnt;
- BYTES bytes;
-
- init_waitqueue_head(&j->poll_q);
- init_waitqueue_head(&j->read_q);
- init_waitqueue_head(&j->write_q);
-
- while(atomic_read(&j->DSPWrite) > 0)
- atomic_dec(&j->DSPWrite);
- if (ixjdebug & 0x0002)
- printk(KERN_INFO "Write IDLE to Software Control Register\n");
- ixj_WriteDSPCommand(0x0FE0, j); /* Put the DSP in full power mode. */
-
- if (ixj_WriteDSPCommand(0x0000, j)) /* Write IDLE to Software Control Register */
- return -1;
-/* The read values of the SSR should be 0x00 for the IDLE command */
- if (j->ssr.low || j->ssr.high)
- return -1;
- if (ixjdebug & 0x0002)
- printk(KERN_INFO "Get Device ID Code\n");
- if (ixj_WriteDSPCommand(0x3400, j)) /* Get Device ID Code */
- return -1;
- j->dsp.low = j->ssr.low;
- j->dsp.high = j->ssr.high;
- if (ixjdebug & 0x0002)
- printk(KERN_INFO "Get Device Version Code\n");
- if (ixj_WriteDSPCommand(0x3800, j)) /* Get Device Version Code */
- return -1;
- j->ver.low = j->ssr.low;
- j->ver.high = j->ssr.high;
- if (!j->cardtype) {
- if (j->dsp.low == 0x21) {
- bytes.high = bytes.low = inb_p(j->XILINXbase + 0x02);
- outb_p(bytes.low ^ 0xFF, j->XILINXbase + 0x02);
-/* Test for Internet LineJACK or Internet PhoneJACK Lite */
- bytes.low = inb_p(j->XILINXbase + 0x02);
- if (bytes.low == bytes.high) /* Register is read only on */
- /* Internet PhoneJack Lite */
- {
- j->cardtype = QTI_PHONEJACK_LITE;
- if (!request_region(j->XILINXbase, 4, "ixj control")) {
- printk(KERN_INFO "ixj: can't get I/O address 0x%x\n", j->XILINXbase);
- return -1;
- }
- j->pld_slicw.pcib.e1 = 1;
- outb_p(j->pld_slicw.byte, j->XILINXbase);
- } else {
- j->cardtype = QTI_LINEJACK;
-
- if (!request_region(j->XILINXbase, 8, "ixj control")) {
- printk(KERN_INFO "ixj: can't get I/O address 0x%x\n", j->XILINXbase);
- return -1;
- }
- }
- } else if (j->dsp.low == 0x22) {
- j->cardtype = QTI_PHONEJACK_PCI;
- request_region(j->XILINXbase, 4, "ixj control");
- j->pld_slicw.pcib.e1 = 1;
- outb_p(j->pld_slicw.byte, j->XILINXbase);
- } else
- j->cardtype = QTI_PHONEJACK;
- } else {
- switch (j->cardtype) {
- case QTI_PHONEJACK:
- if (!j->dsp.low != 0x20) {
- j->dsp.high = 0x80;
- j->dsp.low = 0x20;
- ixj_WriteDSPCommand(0x3800, j);
- j->ver.low = j->ssr.low;
- j->ver.high = j->ssr.high;
- }
- break;
- case QTI_LINEJACK:
- if (!request_region(j->XILINXbase, 8, "ixj control")) {
- printk(KERN_INFO "ixj: can't get I/O address 0x%x\n", j->XILINXbase);
- return -1;
- }
- break;
- case QTI_PHONEJACK_LITE:
- case QTI_PHONEJACK_PCI:
- if (!request_region(j->XILINXbase, 4, "ixj control")) {
- printk(KERN_INFO "ixj: can't get I/O address 0x%x\n", j->XILINXbase);
- return -1;
- }
- j->pld_slicw.pcib.e1 = 1;
- outb_p(j->pld_slicw.byte, j->XILINXbase);
- break;
- case QTI_PHONECARD:
- break;
- }
- }
- if (j->dsp.low == 0x20 || j->cardtype == QTI_PHONEJACK_LITE || j->cardtype == QTI_PHONEJACK_PCI) {
- if (ixjdebug & 0x0002)
- printk(KERN_INFO "Write CODEC config to Software Control Register\n");
- if (ixj_WriteDSPCommand(0xC462, j)) /* Write CODEC config to Software Control Register */
- return -1;
- if (ixjdebug & 0x0002)
- printk(KERN_INFO "Write CODEC timing to Software Control Register\n");
- if (j->cardtype == QTI_PHONEJACK) {
- cmd = 0x9FF2;
- } else {
- cmd = 0x9FF5;
- }
- if (ixj_WriteDSPCommand(cmd, j)) /* Write CODEC timing to Software Control Register */
- return -1;
- } else {
- if (set_base_frame(j, 30) != 30)
- return -1;
- if (ixjdebug & 0x0002)
- printk(KERN_INFO "Write CODEC config to Software Control Register\n");
- if (j->cardtype == QTI_PHONECARD) {
- if (ixj_WriteDSPCommand(0xC528, j)) /* Write CODEC config to Software Control Register */
- return -1;
- }
- if (j->cardtype == QTI_LINEJACK) {
- if (ixj_WriteDSPCommand(0xC528, j)) /* Write CODEC config to Software Control Register */
- return -1;
- if (ixjdebug & 0x0002)
- printk(KERN_INFO "Turn on the PLD Clock at 8Khz\n");
- j->pld_clock.byte = 0;
- outb_p(j->pld_clock.byte, j->XILINXbase + 0x04);
- }
- }
-
- if (j->dsp.low == 0x20) {
- if (ixjdebug & 0x0002)
- printk(KERN_INFO "Configure GPIO pins\n");
- j->gpio.bytes.high = 0x09;
-/* bytes.low = 0xEF; 0xF7 */
- j->gpio.bits.gpio1 = 1;
- j->gpio.bits.gpio2 = 1;
- j->gpio.bits.gpio3 = 0;
- j->gpio.bits.gpio4 = 1;
- j->gpio.bits.gpio5 = 1;
- j->gpio.bits.gpio6 = 1;
- j->gpio.bits.gpio7 = 1;
- ixj_WriteDSPCommand(j->gpio.word, j); /* Set GPIO pin directions */
- if (ixjdebug & 0x0002)
- printk(KERN_INFO "Enable SLIC\n");
- j->gpio.bytes.high = 0x0B;
- j->gpio.bytes.low = 0x00;
- j->gpio.bits.gpio1 = 0;
- j->gpio.bits.gpio2 = 1;
- j->gpio.bits.gpio5 = 0;
- ixj_WriteDSPCommand(j->gpio.word, j); /* send the ring stop signal */
- j->port = PORT_POTS;
- } else {
- if (j->cardtype == QTI_LINEJACK) {
- LED_SetState(0x1, j);
- msleep(100);
- LED_SetState(0x2, j);
- msleep(100);
- LED_SetState(0x4, j);
- msleep(100);
- LED_SetState(0x8, j);
- msleep(100);
- LED_SetState(0x0, j);
- daa_get_version(j);
- if (ixjdebug & 0x0002)
- printk("Loading DAA Coefficients\n");
- DAA_Coeff_US(j);
- if (!ixj_daa_write(j)) {
- printk("DAA write failed on board %d\n", j->board);
- return -1;
- }
- if(!ixj_daa_cid_reset(j)) {
- printk("DAA CID reset failed on board %d\n", j->board);
- return -1;
- }
- j->flags.pots_correct = 0;
- j->flags.pstn_present = 0;
- ixj_linetest(j);
- if (j->flags.pots_correct) {
- j->pld_scrw.bits.daafsyncen = 0; /* Turn off DAA Frame Sync */
-
- outb_p(j->pld_scrw.byte, j->XILINXbase);
- j->pld_slicw.bits.rly1 = 1;
- j->pld_slicw.bits.spken = 1;
- outb_p(j->pld_slicw.byte, j->XILINXbase + 0x01);
- SLIC_SetState(PLD_SLIC_STATE_STANDBY, j);
-/* SLIC_SetState(PLD_SLIC_STATE_ACTIVE, j); */
- j->port = PORT_POTS;
- }
- ixj_set_port(j, PORT_PSTN);
- ixj_set_pots(j, 1);
- if (ixjdebug & 0x0002)
- printk(KERN_INFO "Enable Mixer\n");
- ixj_mixer(0x0000, j); /*Master Volume Left unmute 0db */
- ixj_mixer(0x0100, j); /*Master Volume Right unmute 0db */
-
- ixj_mixer(0x0203, j); /*Voice Left Volume unmute 6db */
- ixj_mixer(0x0303, j); /*Voice Right Volume unmute 6db */
-
- ixj_mixer(0x0480, j); /*FM Left mute */
- ixj_mixer(0x0580, j); /*FM Right mute */
-
- ixj_mixer(0x0680, j); /*CD Left mute */
- ixj_mixer(0x0780, j); /*CD Right mute */
-
- ixj_mixer(0x0880, j); /*Line Left mute */
- ixj_mixer(0x0980, j); /*Line Right mute */
-
- ixj_mixer(0x0A80, j); /*Aux left mute */
- ixj_mixer(0x0B80, j); /*Aux right mute */
-
- ixj_mixer(0x0C00, j); /*Mono1 unmute 12db */
- ixj_mixer(0x0D80, j); /*Mono2 mute */
-
- ixj_mixer(0x0E80, j); /*Mic mute */
-
- ixj_mixer(0x0F00, j); /*Mono Out Volume unmute 0db */
-
- ixj_mixer(0x1000, j); /*Voice Left and Right out only */
- ixj_mixer(0x110C, j);
-
-
- ixj_mixer(0x1200, j); /*Mono1 switch on mixer left */
- ixj_mixer(0x1401, j);
-
- ixj_mixer(0x1300, j); /*Mono1 switch on mixer right */
- ixj_mixer(0x1501, j);
-
- ixj_mixer(0x1700, j); /*Clock select */
-
- ixj_mixer(0x1800, j); /*ADC input from mixer */
-
- ixj_mixer(0x1901, j); /*Mic gain 30db */
-
- if (ixjdebug & 0x0002)
- printk(KERN_INFO "Setting Default US Ring Cadence Detection\n");
- j->cadence_f[4].state = 0;
- j->cadence_f[4].on1 = 0; /*Cadence Filter 4 is used for PSTN ring cadence */
- j->cadence_f[4].off1 = 0;
- j->cadence_f[4].on2 = 0;
- j->cadence_f[4].off2 = 0;
- j->cadence_f[4].on3 = 0;
- j->cadence_f[4].off3 = 0; /* These should represent standard US ring pulse. */
- j->pstn_last_rmr = jiffies;
-
- } else {
- if (j->cardtype == QTI_PHONECARD) {
- ixj_WriteDSPCommand(0xCF07, j);
- ixj_WriteDSPCommand(0x00B0, j);
- ixj_set_port(j, PORT_SPEAKER);
- } else {
- ixj_set_port(j, PORT_POTS);
- SLIC_SetState(PLD_SLIC_STATE_STANDBY, j);
-/* SLIC_SetState(PLD_SLIC_STATE_ACTIVE, j); */
- }
- }
- }
-
- j->intercom = -1;
- j->framesread = j->frameswritten = 0;
- j->read_wait = j->write_wait = 0;
- j->rxreadycheck = j->txreadycheck = 0;
-
- /* initialise the DTMF prescale to a sensible value */
- if (j->cardtype == QTI_LINEJACK) {
- set_dtmf_prescale(j, 0x10);
- } else {
- set_dtmf_prescale(j, 0x40);
- }
- set_play_volume(j, 0x100);
- set_rec_volume(j, 0x100);
-
- if (ixj_WriteDSPCommand(0x0000, j)) /* Write IDLE to Software Control Register */
- return -1;
-/* The read values of the SSR should be 0x00 for the IDLE command */
- if (j->ssr.low || j->ssr.high)
- return -1;
-
- if (ixjdebug & 0x0002)
- printk(KERN_INFO "Enable Line Monitor\n");
-
- if (ixjdebug & 0x0002)
- printk(KERN_INFO "Set Line Monitor to Asynchronous Mode\n");
-
- if (ixj_WriteDSPCommand(0x7E01, j)) /* Asynchronous Line Monitor */
- return -1;
-
- if (ixjdebug & 0x002)
- printk(KERN_INFO "Enable DTMF Detectors\n");
-
- if (ixj_WriteDSPCommand(0x5151, j)) /* Enable DTMF detection */
- return -1;
-
- if (ixj_WriteDSPCommand(0x6E01, j)) /* Set Asynchronous Tone Generation */
- return -1;
-
- set_rec_depth(j, 2); /* Set Record Channel Limit to 2 frames */
-
- set_play_depth(j, 2); /* Set Playback Channel Limit to 2 frames */
-
- j->ex.bits.dtmf_ready = 0;
- j->dtmf_state = 0;
- j->dtmf_wp = j->dtmf_rp = 0;
- j->rec_mode = j->play_mode = -1;
- j->flags.ringing = 0;
- j->maxrings = MAXRINGS;
- j->ring_cadence = USA_RING_CADENCE;
- j->drybuffer = 0;
- j->winktime = 320;
- j->flags.dtmf_oob = 0;
- for (cnt = 0; cnt < 4; cnt++)
- j->cadence_f[cnt].enable = 0;
- /* must be a device on the specified address */
- ixj_WriteDSPCommand(0x0FE3, j); /* Put the DSP in 1/5 power mode. */
-
- /* Set up the default signals for events */
- for (cnt = 0; cnt < 35; cnt++)
- j->ixj_signals[cnt] = SIGIO;
-
- /* Set the exception signal enable flags */
- j->ex_sig.bits.dtmf_ready = j->ex_sig.bits.hookstate = j->ex_sig.bits.flash = j->ex_sig.bits.pstn_ring =
- j->ex_sig.bits.caller_id = j->ex_sig.bits.pstn_wink = j->ex_sig.bits.f0 = j->ex_sig.bits.f1 = j->ex_sig.bits.f2 =
- j->ex_sig.bits.f3 = j->ex_sig.bits.fc0 = j->ex_sig.bits.fc1 = j->ex_sig.bits.fc2 = j->ex_sig.bits.fc3 = 1;
-#ifdef IXJ_DYN_ALLOC
- j->fskdata = NULL;
-#endif
- j->fskdcnt = 0;
- j->cidcw_wait = 0;
-
- /* Register with the Telephony for Linux subsystem */
- j->p.f_op = &ixj_fops;
- j->p.open = ixj_open;
- j->p.board = j->board;
- phone_register_device(&j->p, PHONE_UNIT_ANY);
-
- ixj_init_timer(j);
- ixj_add_timer(j);
- return 0;
-}
-
-/*
- * Exported service for pcmcia card handling
- */
-
-IXJ *ixj_pcmcia_probe(unsigned long dsp, unsigned long xilinx)
-{
- IXJ *j = ixj_alloc();
-
- j->board = 0;
-
- j->DSPbase = dsp;
- j->XILINXbase = xilinx;
- j->cardtype = QTI_PHONECARD;
- ixj_selfprobe(j);
- return j;
-}
-
-EXPORT_SYMBOL(ixj_pcmcia_probe); /* For PCMCIA */
-
-static int ixj_get_status_proc(char *buf)
-{
- int len;
- int cnt;
- IXJ *j;
- len = 0;
- len += sprintf(buf + len, "\nDriver version %i.%i.%i", IXJ_VER_MAJOR, IXJ_VER_MINOR, IXJ_BLD_VER);
- len += sprintf(buf + len, "\nsizeof IXJ struct %Zd bytes", sizeof(IXJ));
- len += sprintf(buf + len, "\nsizeof DAA struct %Zd bytes", sizeof(DAA_REGS));
- len += sprintf(buf + len, "\nUsing old telephony API");
- len += sprintf(buf + len, "\nDebug Level %d\n", ixjdebug);
-
- for (cnt = 0; cnt < IXJMAX; cnt++) {
- j = get_ixj(cnt);
- if(j==NULL)
- continue;
- if (j->DSPbase) {
- len += sprintf(buf + len, "\nCard Num %d", cnt);
- len += sprintf(buf + len, "\nDSP Base Address 0x%4.4x", j->DSPbase);
- if (j->cardtype != QTI_PHONEJACK)
- len += sprintf(buf + len, "\nXILINX Base Address 0x%4.4x", j->XILINXbase);
- len += sprintf(buf + len, "\nDSP Type %2.2x%2.2x", j->dsp.high, j->dsp.low);
- len += sprintf(buf + len, "\nDSP Version %2.2x.%2.2x", j->ver.high, j->ver.low);
- len += sprintf(buf + len, "\nSerial Number %8.8x", j->serial);
- switch (j->cardtype) {
- case (QTI_PHONEJACK):
- len += sprintf(buf + len, "\nCard Type = Internet PhoneJACK");
- break;
- case (QTI_LINEJACK):
- len += sprintf(buf + len, "\nCard Type = Internet LineJACK");
- if (j->flags.g729_loaded)
- len += sprintf(buf + len, " w/G.729 A/B");
- len += sprintf(buf + len, " Country = %d", j->daa_country);
- break;
- case (QTI_PHONEJACK_LITE):
- len += sprintf(buf + len, "\nCard Type = Internet PhoneJACK Lite");
- if (j->flags.g729_loaded)
- len += sprintf(buf + len, " w/G.729 A/B");
- break;
- case (QTI_PHONEJACK_PCI):
- len += sprintf(buf + len, "\nCard Type = Internet PhoneJACK PCI");
- if (j->flags.g729_loaded)
- len += sprintf(buf + len, " w/G.729 A/B");
- break;
- case (QTI_PHONECARD):
- len += sprintf(buf + len, "\nCard Type = Internet PhoneCARD");
- if (j->flags.g729_loaded)
- len += sprintf(buf + len, " w/G.729 A/B");
- len += sprintf(buf + len, "\nSmart Cable %spresent", j->pccr1.bits.drf ? "not " : "");
- if (!j->pccr1.bits.drf)
- len += sprintf(buf + len, "\nSmart Cable type %d", j->flags.pcmciasct);
- len += sprintf(buf + len, "\nSmart Cable state %d", j->flags.pcmciastate);
- break;
- default:
- len += sprintf(buf + len, "\nCard Type = %d", j->cardtype);
- break;
- }
- len += sprintf(buf + len, "\nReaders %d", j->readers);
- len += sprintf(buf + len, "\nWriters %d", j->writers);
- add_caps(j);
- len += sprintf(buf + len, "\nCapabilities %d", j->caps);
- if (j->dsp.low != 0x20)
- len += sprintf(buf + len, "\nDSP Processor load %d", j->proc_load);
- if (j->flags.cidsent)
- len += sprintf(buf + len, "\nCaller ID data sent");
- else
- len += sprintf(buf + len, "\nCaller ID data not sent");
-
- len += sprintf(buf + len, "\nPlay CODEC ");
- switch (j->play_codec) {
- case G723_63:
- len += sprintf(buf + len, "G.723.1 6.3");
- break;
- case G723_53:
- len += sprintf(buf + len, "G.723.1 5.3");
- break;
- case TS85:
- len += sprintf(buf + len, "TrueSpeech 8.5");
- break;
- case TS48:
- len += sprintf(buf + len, "TrueSpeech 4.8");
- break;
- case TS41:
- len += sprintf(buf + len, "TrueSpeech 4.1");
- break;
- case G728:
- len += sprintf(buf + len, "G.728");
- break;
- case G729:
- len += sprintf(buf + len, "G.729");
- break;
- case G729B:
- len += sprintf(buf + len, "G.729B");
- break;
- case ULAW:
- len += sprintf(buf + len, "uLaw");
- break;
- case ALAW:
- len += sprintf(buf + len, "aLaw");
- break;
- case LINEAR16:
- len += sprintf(buf + len, "16 bit Linear");
- break;
- case LINEAR8:
- len += sprintf(buf + len, "8 bit Linear");
- break;
- case WSS:
- len += sprintf(buf + len, "Windows Sound System");
- break;
- default:
- len += sprintf(buf + len, "NO CODEC CHOSEN");
- break;
- }
- len += sprintf(buf + len, "\nRecord CODEC ");
- switch (j->rec_codec) {
- case G723_63:
- len += sprintf(buf + len, "G.723.1 6.3");
- break;
- case G723_53:
- len += sprintf(buf + len, "G.723.1 5.3");
- break;
- case TS85:
- len += sprintf(buf + len, "TrueSpeech 8.5");
- break;
- case TS48:
- len += sprintf(buf + len, "TrueSpeech 4.8");
- break;
- case TS41:
- len += sprintf(buf + len, "TrueSpeech 4.1");
- break;
- case G728:
- len += sprintf(buf + len, "G.728");
- break;
- case G729:
- len += sprintf(buf + len, "G.729");
- break;
- case G729B:
- len += sprintf(buf + len, "G.729B");
- break;
- case ULAW:
- len += sprintf(buf + len, "uLaw");
- break;
- case ALAW:
- len += sprintf(buf + len, "aLaw");
- break;
- case LINEAR16:
- len += sprintf(buf + len, "16 bit Linear");
- break;
- case LINEAR8:
- len += sprintf(buf + len, "8 bit Linear");
- break;
- case WSS:
- len += sprintf(buf + len, "Windows Sound System");
- break;
- default:
- len += sprintf(buf + len, "NO CODEC CHOSEN");
- break;
- }
- len += sprintf(buf + len, "\nAEC ");
- switch (j->aec_level) {
- case AEC_OFF:
- len += sprintf(buf + len, "Off");
- break;
- case AEC_LOW:
- len += sprintf(buf + len, "Low");
- break;
- case AEC_MED:
- len += sprintf(buf + len, "Med");
- break;
- case AEC_HIGH:
- len += sprintf(buf + len, "High");
- break;
- case AEC_AUTO:
- len += sprintf(buf + len, "Auto");
- break;
- case AEC_AGC:
- len += sprintf(buf + len, "AEC/AGC");
- break;
- default:
- len += sprintf(buf + len, "unknown(%i)", j->aec_level);
- break;
- }
-
- len += sprintf(buf + len, "\nRec volume 0x%x", get_rec_volume(j));
- len += sprintf(buf + len, "\nPlay volume 0x%x", get_play_volume(j));
- len += sprintf(buf + len, "\nDTMF prescale 0x%x", get_dtmf_prescale(j));
-
- len += sprintf(buf + len, "\nHook state %d", j->hookstate); /* j->r_hook); */
-
- if (j->cardtype == QTI_LINEJACK) {
- len += sprintf(buf + len, "\nPOTS Correct %d", j->flags.pots_correct);
- len += sprintf(buf + len, "\nPSTN Present %d", j->flags.pstn_present);
- len += sprintf(buf + len, "\nPSTN Check %d", j->flags.pstncheck);
- len += sprintf(buf + len, "\nPOTS to PSTN %d", j->flags.pots_pstn);
- switch (j->daa_mode) {
- case SOP_PU_SLEEP:
- len += sprintf(buf + len, "\nDAA PSTN On Hook");
- break;
- case SOP_PU_RINGING:
- len += sprintf(buf + len, "\nDAA PSTN Ringing");
- len += sprintf(buf + len, "\nRinging state = %d", j->cadence_f[4].state);
- break;
- case SOP_PU_CONVERSATION:
- len += sprintf(buf + len, "\nDAA PSTN Off Hook");
- break;
- case SOP_PU_PULSEDIALING:
- len += sprintf(buf + len, "\nDAA PSTN Pulse Dialing");
- break;
- }
- len += sprintf(buf + len, "\nDAA RMR = %d", j->m_DAAShadowRegs.SOP_REGS.SOP.cr1.bitreg.RMR);
- len += sprintf(buf + len, "\nDAA VDD OK = %d", j->m_DAAShadowRegs.XOP_REGS.XOP.xr0.bitreg.VDD_OK);
- len += sprintf(buf + len, "\nDAA CR0 = 0x%02x", j->m_DAAShadowRegs.SOP_REGS.SOP.cr0.reg);
- len += sprintf(buf + len, "\nDAA CR1 = 0x%02x", j->m_DAAShadowRegs.SOP_REGS.SOP.cr1.reg);
- len += sprintf(buf + len, "\nDAA CR2 = 0x%02x", j->m_DAAShadowRegs.SOP_REGS.SOP.cr2.reg);
- len += sprintf(buf + len, "\nDAA CR3 = 0x%02x", j->m_DAAShadowRegs.SOP_REGS.SOP.cr3.reg);
- len += sprintf(buf + len, "\nDAA CR4 = 0x%02x", j->m_DAAShadowRegs.SOP_REGS.SOP.cr4.reg);
- len += sprintf(buf + len, "\nDAA CR5 = 0x%02x", j->m_DAAShadowRegs.SOP_REGS.SOP.cr5.reg);
- len += sprintf(buf + len, "\nDAA XR0 = 0x%02x", j->m_DAAShadowRegs.XOP_REGS.XOP.xr0.reg);
- len += sprintf(buf + len, "\nDAA ringstop %ld - jiffies %ld", j->pstn_ring_stop, jiffies);
- }
- switch (j->port) {
- case PORT_POTS:
- len += sprintf(buf + len, "\nPort POTS");
- break;
- case PORT_PSTN:
- len += sprintf(buf + len, "\nPort PSTN");
- break;
- case PORT_SPEAKER:
- len += sprintf(buf + len, "\nPort SPEAKER/MIC");
- break;
- case PORT_HANDSET:
- len += sprintf(buf + len, "\nPort HANDSET");
- break;
- }
- if (j->dsp.low == 0x21 || j->dsp.low == 0x22) {
- len += sprintf(buf + len, "\nSLIC state ");
- switch (SLIC_GetState(j)) {
- case PLD_SLIC_STATE_OC:
- len += sprintf(buf + len, "OC");
- break;
- case PLD_SLIC_STATE_RINGING:
- len += sprintf(buf + len, "RINGING");
- break;
- case PLD_SLIC_STATE_ACTIVE:
- len += sprintf(buf + len, "ACTIVE");
- break;
- case PLD_SLIC_STATE_OHT: /* On-hook transmit */
- len += sprintf(buf + len, "OHT");
- break;
- case PLD_SLIC_STATE_TIPOPEN:
- len += sprintf(buf + len, "TIPOPEN");
- break;
- case PLD_SLIC_STATE_STANDBY:
- len += sprintf(buf + len, "STANDBY");
- break;
- case PLD_SLIC_STATE_APR: /* Active polarity reversal */
- len += sprintf(buf + len, "APR");
- break;
- case PLD_SLIC_STATE_OHTPR: /* OHT polarity reversal */
- len += sprintf(buf + len, "OHTPR");
- break;
- default:
- len += sprintf(buf + len, "%d", SLIC_GetState(j));
- break;
- }
- }
- len += sprintf(buf + len, "\nBase Frame %2.2x.%2.2x", j->baseframe.high, j->baseframe.low);
- len += sprintf(buf + len, "\nCID Base Frame %2d", j->cid_base_frame_size);
-#ifdef PERFMON_STATS
- len += sprintf(buf + len, "\nTimer Checks %ld", j->timerchecks);
- len += sprintf(buf + len, "\nRX Ready Checks %ld", j->rxreadycheck);
- len += sprintf(buf + len, "\nTX Ready Checks %ld", j->txreadycheck);
- len += sprintf(buf + len, "\nFrames Read %ld", j->framesread);
- len += sprintf(buf + len, "\nFrames Written %ld", j->frameswritten);
- len += sprintf(buf + len, "\nDry Buffer %ld", j->drybuffer);
- len += sprintf(buf + len, "\nRead Waits %ld", j->read_wait);
- len += sprintf(buf + len, "\nWrite Waits %ld", j->write_wait);
- len += sprintf(buf + len, "\nStatus Waits %ld", j->statuswait);
- len += sprintf(buf + len, "\nStatus Wait Fails %ld", j->statuswaitfail);
- len += sprintf(buf + len, "\nPControl Waits %ld", j->pcontrolwait);
- len += sprintf(buf + len, "\nPControl Wait Fails %ld", j->pcontrolwaitfail);
- len += sprintf(buf + len, "\nIs Control Ready Checks %ld", j->iscontrolready);
- len += sprintf(buf + len, "\nIs Control Ready Check failures %ld", j->iscontrolreadyfail);
-
-#endif
- len += sprintf(buf + len, "\n");
- }
- }
- return len;
-}
-
-static int ixj_read_proc(char *page, char **start, off_t off,
- int count, int *eof, void *data)
-{
- int len = ixj_get_status_proc(page);
- if (len <= off+count) *eof = 1;
- *start = page + off;
- len -= off;
- if (len>count) len = count;
- if (len<0) len = 0;
- return len;
-}
-
-
-static void cleanup(void)
-{
- int cnt;
- IXJ *j;
-
- for (cnt = 0; cnt < IXJMAX; cnt++) {
- j = get_ixj(cnt);
- if(j != NULL && j->DSPbase) {
- if (ixjdebug & 0x0002)
- printk(KERN_INFO "IXJ: Deleting timer for /dev/phone%d\n", cnt);
- del_timer(&j->timer);
- if (j->cardtype == QTI_LINEJACK) {
- j->pld_scrw.bits.daafsyncen = 0; /* Turn off DAA Frame Sync */
-
- outb_p(j->pld_scrw.byte, j->XILINXbase);
- j->pld_slicw.bits.rly1 = 0;
- j->pld_slicw.bits.rly2 = 0;
- j->pld_slicw.bits.rly3 = 0;
- outb_p(j->pld_slicw.byte, j->XILINXbase + 0x01);
- LED_SetState(0x0, j);
- if (ixjdebug & 0x0002)
- printk(KERN_INFO "IXJ: Releasing XILINX address for /dev/phone%d\n", cnt);
- release_region(j->XILINXbase, 8);
- } else if (j->cardtype == QTI_PHONEJACK_LITE || j->cardtype == QTI_PHONEJACK_PCI) {
- if (ixjdebug & 0x0002)
- printk(KERN_INFO "IXJ: Releasing XILINX address for /dev/phone%d\n", cnt);
- release_region(j->XILINXbase, 4);
- }
- kfree(j->read_buffer);
- kfree(j->write_buffer);
- if (j->dev)
- pnp_device_detach(j->dev);
- if (ixjdebug & 0x0002)
- printk(KERN_INFO "IXJ: Unregistering /dev/phone%d from LTAPI\n", cnt);
- phone_unregister_device(&j->p);
- if (ixjdebug & 0x0002)
- printk(KERN_INFO "IXJ: Releasing DSP address for /dev/phone%d\n", cnt);
- release_region(j->DSPbase, 16);
-#ifdef IXJ_DYN_ALLOC
- if (ixjdebug & 0x0002)
- printk(KERN_INFO "IXJ: Freeing memory for /dev/phone%d\n", cnt);
- kfree(j);
- ixj[cnt] = NULL;
-#endif
- }
- }
- if (ixjdebug & 0x0002)
- printk(KERN_INFO "IXJ: Removing /proc/ixj\n");
- remove_proc_entry ("ixj", NULL);
-}
-
-/* Typedefs */
-typedef struct {
- BYTE length;
- DWORD bits;
-} DATABLOCK;
-
-static void PCIEE_WriteBit(WORD wEEPROMAddress, BYTE lastLCC, BYTE byData)
-{
- lastLCC = lastLCC & 0xfb;
- lastLCC = lastLCC | (byData ? 4 : 0);
- outb(lastLCC, wEEPROMAddress); /*set data out bit as appropriate */
-
- mdelay(1);
- lastLCC = lastLCC | 0x01;
- outb(lastLCC, wEEPROMAddress); /*SK rising edge */
-
- byData = byData << 1;
- lastLCC = lastLCC & 0xfe;
- mdelay(1);
- outb(lastLCC, wEEPROMAddress); /*after delay, SK falling edge */
-
-}
-
-static BYTE PCIEE_ReadBit(WORD wEEPROMAddress, BYTE lastLCC)
-{
- mdelay(1);
- lastLCC = lastLCC | 0x01;
- outb(lastLCC, wEEPROMAddress); /*SK rising edge */
-
- lastLCC = lastLCC & 0xfe;
- mdelay(1);
- outb(lastLCC, wEEPROMAddress); /*after delay, SK falling edge */
-
- return ((inb(wEEPROMAddress) >> 3) & 1);
-}
-
-static bool PCIEE_ReadWord(WORD wAddress, WORD wLoc, WORD * pwResult)
-{
- BYTE lastLCC;
- WORD wEEPROMAddress = wAddress + 3;
- DWORD i;
- BYTE byResult;
- *pwResult = 0;
- lastLCC = inb(wEEPROMAddress);
- lastLCC = lastLCC | 0x02;
- lastLCC = lastLCC & 0xfe;
- outb(lastLCC, wEEPROMAddress); /* CS hi, SK lo */
-
- mdelay(1); /* delay */
-
- PCIEE_WriteBit(wEEPROMAddress, lastLCC, 1);
- PCIEE_WriteBit(wEEPROMAddress, lastLCC, 1);
- PCIEE_WriteBit(wEEPROMAddress, lastLCC, 0);
- for (i = 0; i < 8; i++) {
- PCIEE_WriteBit(wEEPROMAddress, lastLCC, wLoc & 0x80 ? 1 : 0);
- wLoc <<= 1;
- }
-
- for (i = 0; i < 16; i++) {
- byResult = PCIEE_ReadBit(wEEPROMAddress, lastLCC);
- *pwResult = (*pwResult << 1) | byResult;
- }
-
- mdelay(1); /* another delay */
-
- lastLCC = lastLCC & 0xfd;
- outb(lastLCC, wEEPROMAddress); /* negate CS */
-
- return 0;
-}
-
-static DWORD PCIEE_GetSerialNumber(WORD wAddress)
-{
- WORD wLo, wHi;
- if (PCIEE_ReadWord(wAddress, 62, &wLo))
- return 0;
- if (PCIEE_ReadWord(wAddress, 63, &wHi))
- return 0;
- return (((DWORD) wHi << 16) | wLo);
-}
-
-static int dspio[IXJMAX + 1] =
-{
- 0,
-};
-static int xio[IXJMAX + 1] =
-{
- 0,
-};
-
-module_param_array(dspio, int, NULL, 0);
-module_param_array(xio, int, NULL, 0);
-MODULE_DESCRIPTION("Quicknet VoIP Telephony card module - www.quicknet.net");
-MODULE_AUTHOR("Ed Okerson <eokerson@quicknet.net>");
-MODULE_LICENSE("GPL");
-
-static void __exit ixj_exit(void)
-{
- cleanup();
-}
-
-static IXJ *new_ixj(unsigned long port)
-{
- IXJ *res;
- if (!request_region(port, 16, "ixj DSP")) {
- printk(KERN_INFO "ixj: can't get I/O address 0x%lx\n", port);
- return NULL;
- }
- res = ixj_alloc();
- if (!res) {
- release_region(port, 16);
- printk(KERN_INFO "ixj: out of memory\n");
- return NULL;
- }
- res->DSPbase = port;
- return res;
-}
-
-static int __init ixj_probe_isapnp(int *cnt)
-{
- int probe = 0;
- int func = 0x110;
- struct pnp_dev *dev = NULL, *old_dev = NULL;
-
- while (1) {
- do {
- IXJ *j;
- int result;
-
- old_dev = dev;
- dev = pnp_find_dev(NULL, ISAPNP_VENDOR('Q', 'T', 'I'),
- ISAPNP_FUNCTION(func), old_dev);
- if (!dev || !dev->card)
- break;
- result = pnp_device_attach(dev);
- if (result < 0) {
- printk("pnp attach failed %d \n", result);
- break;
- }
- if (pnp_activate_dev(dev) < 0) {
- printk("pnp activate failed (out of resources?)\n");
- pnp_device_detach(dev);
- return -ENOMEM;
- }
-
- if (!pnp_port_valid(dev, 0)) {
- pnp_device_detach(dev);
- return -ENODEV;
- }
-
- j = new_ixj(pnp_port_start(dev, 0));
- if (!j)
- break;
-
- if (func != 0x110)
- j->XILINXbase = pnp_port_start(dev, 1); /* get real port */
-
- switch (func) {
- case (0x110):
- j->cardtype = QTI_PHONEJACK;
- break;
- case (0x310):
- j->cardtype = QTI_LINEJACK;
- break;
- case (0x410):
- j->cardtype = QTI_PHONEJACK_LITE;
- break;
- }
- j->board = *cnt;
- probe = ixj_selfprobe(j);
- if(!probe) {
- j->serial = dev->card->serial;
- j->dev = dev;
- switch (func) {
- case 0x110:
- printk(KERN_INFO "ixj: found Internet PhoneJACK at 0x%x\n", j->DSPbase);
- break;
- case 0x310:
- printk(KERN_INFO "ixj: found Internet LineJACK at 0x%x\n", j->DSPbase);
- break;
- case 0x410:
- printk(KERN_INFO "ixj: found Internet PhoneJACK Lite at 0x%x\n", j->DSPbase);
- break;
- }
- }
- ++*cnt;
- } while (dev);
- if (func == 0x410)
- break;
- if (func == 0x310)
- func = 0x410;
- if (func == 0x110)
- func = 0x310;
- dev = NULL;
- }
- return probe;
-}
-
-static int __init ixj_probe_isa(int *cnt)
-{
- int i, probe;
-
- /* Use passed parameters for older kernels without PnP */
- for (i = 0; i < IXJMAX; i++) {
- if (dspio[i]) {
- IXJ *j = new_ixj(dspio[i]);
-
- if (!j)
- break;
-
- j->XILINXbase = xio[i];
- j->cardtype = 0;
-
- j->board = *cnt;
- probe = ixj_selfprobe(j);
- j->dev = NULL;
- ++*cnt;
- }
- }
- return 0;
-}
-
-static int __init ixj_probe_pci(int *cnt)
-{
- struct pci_dev *pci = NULL;
- int i, probe = 0;
- IXJ *j = NULL;
-
- for (i = 0; i < IXJMAX - *cnt; i++) {
- pci = pci_get_device(PCI_VENDOR_ID_QUICKNET,
- PCI_DEVICE_ID_QUICKNET_XJ, pci);
- if (!pci)
- break;
-
- if (pci_enable_device(pci))
- break;
- j = new_ixj(pci_resource_start(pci, 0));
- if (!j)
- break;
-
- j->serial = (PCIEE_GetSerialNumber)pci_resource_start(pci, 2);
- j->XILINXbase = j->DSPbase + 0x10;
- j->cardtype = QTI_PHONEJACK_PCI;
- j->board = *cnt;
- probe = ixj_selfprobe(j);
- if (!probe)
- printk(KERN_INFO "ixj: found Internet PhoneJACK PCI at 0x%x\n", j->DSPbase);
- ++*cnt;
- }
- pci_dev_put(pci);
- return probe;
-}
-
-static int __init ixj_init(void)
-{
- int cnt = 0;
- int probe = 0;
-
- cnt = 0;
-
- /* These might be no-ops, see above. */
- if ((probe = ixj_probe_isapnp(&cnt)) < 0) {
- return probe;
- }
- if ((probe = ixj_probe_isa(&cnt)) < 0) {
- return probe;
- }
- if ((probe = ixj_probe_pci(&cnt)) < 0) {
- return probe;
- }
- printk(KERN_INFO "ixj driver initialized.\n");
- create_proc_read_entry ("ixj", 0, NULL, ixj_read_proc, NULL);
- return probe;
-}
-
-module_init(ixj_init);
-module_exit(ixj_exit);
-
-static void DAA_Coeff_US(IXJ *j)
-{
- int i;
-
- j->daa_country = DAA_US;
- /*----------------------------------------------- */
- /* CAO */
- for (i = 0; i < ALISDAA_CALLERID_SIZE; i++) {
- j->m_DAAShadowRegs.CAO_REGS.CAO.CallerID[i] = 0;
- }
-
-/* Bytes for IM-filter part 1 (04): 0E,32,E2,2F,C2,5A,C0,00 */
- j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_1[7] = 0x03;
- j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_1[6] = 0x4B;
- j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_1[5] = 0x5D;
- j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_1[4] = 0xCD;
- j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_1[3] = 0x24;
- j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_1[2] = 0xC5;
- j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_1[1] = 0xA0;
- j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_1[0] = 0x00;
-/* Bytes for IM-filter part 2 (05): 72,85,00,0E,2B,3A,D0,08 */
- j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_2[7] = 0x71;
- j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_2[6] = 0x1A;
- j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_2[5] = 0x00;
- j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_2[4] = 0x0A;
- j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_2[3] = 0xB5;
- j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_2[2] = 0x33;
- j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_2[1] = 0xE0;
- j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_2[0] = 0x08;
-/* Bytes for FRX-filter (08): 03,8F,48,F2,8F,48,70,08 */
- j->m_DAAShadowRegs.COP_REGS.COP.FRXFilterCoeff[7] = 0x05;
- j->m_DAAShadowRegs.COP_REGS.COP.FRXFilterCoeff[6] = 0xA3;
- j->m_DAAShadowRegs.COP_REGS.COP.FRXFilterCoeff[5] = 0x72;
- j->m_DAAShadowRegs.COP_REGS.COP.FRXFilterCoeff[4] = 0x34;
- j->m_DAAShadowRegs.COP_REGS.COP.FRXFilterCoeff[3] = 0x3F;
- j->m_DAAShadowRegs.COP_REGS.COP.FRXFilterCoeff[2] = 0x3B;
- j->m_DAAShadowRegs.COP_REGS.COP.FRXFilterCoeff[1] = 0x30;
- j->m_DAAShadowRegs.COP_REGS.COP.FRXFilterCoeff[0] = 0x08;
-/* Bytes for FRR-filter (07): 04,8F,38,7F,9B,EA,B0,08 */
- j->m_DAAShadowRegs.COP_REGS.COP.FRRFilterCoeff[7] = 0x05;
- j->m_DAAShadowRegs.COP_REGS.COP.FRRFilterCoeff[6] = 0x87;
- j->m_DAAShadowRegs.COP_REGS.COP.FRRFilterCoeff[5] = 0xF9;
- j->m_DAAShadowRegs.COP_REGS.COP.FRRFilterCoeff[4] = 0x3E;
- j->m_DAAShadowRegs.COP_REGS.COP.FRRFilterCoeff[3] = 0x32;
- j->m_DAAShadowRegs.COP_REGS.COP.FRRFilterCoeff[2] = 0xDA;
- j->m_DAAShadowRegs.COP_REGS.COP.FRRFilterCoeff[1] = 0xB0;
- j->m_DAAShadowRegs.COP_REGS.COP.FRRFilterCoeff[0] = 0x08;
-/* Bytes for AX-filter (0A): 16,55,DD,CA */
- j->m_DAAShadowRegs.COP_REGS.COP.AXFilterCoeff[3] = 0x41;
- j->m_DAAShadowRegs.COP_REGS.COP.AXFilterCoeff[2] = 0xB5;
- j->m_DAAShadowRegs.COP_REGS.COP.AXFilterCoeff[1] = 0xDD;
- j->m_DAAShadowRegs.COP_REGS.COP.AXFilterCoeff[0] = 0xCA;
-/* Bytes for AR-filter (09): 52,D3,11,42 */
- j->m_DAAShadowRegs.COP_REGS.COP.ARFilterCoeff[3] = 0x25;
- j->m_DAAShadowRegs.COP_REGS.COP.ARFilterCoeff[2] = 0xC7;
- j->m_DAAShadowRegs.COP_REGS.COP.ARFilterCoeff[1] = 0x10;
- j->m_DAAShadowRegs.COP_REGS.COP.ARFilterCoeff[0] = 0xD6;
-/* Bytes for TH-filter part 1 (00): 00,42,48,81,B3,80,00,98 */
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_1[7] = 0x00;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_1[6] = 0x42;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_1[5] = 0x48;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_1[4] = 0x81;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_1[3] = 0xA5;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_1[2] = 0x80;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_1[1] = 0x00;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_1[0] = 0x98;
-/* Bytes for TH-filter part 2 (01): 02,F2,33,A0,68,AB,8A,AD */
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_2[7] = 0x02;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_2[6] = 0xA2;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_2[5] = 0x2B;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_2[4] = 0xB0;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_2[3] = 0xE8;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_2[2] = 0xAB;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_2[1] = 0x81;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_2[0] = 0xCC;
-/* Bytes for TH-filter part 3 (02): 00,88,DA,54,A4,BA,2D,BB */
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_3[7] = 0x00;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_3[6] = 0x88;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_3[5] = 0xD2;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_3[4] = 0x24;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_3[3] = 0xBA;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_3[2] = 0xA9;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_3[1] = 0x3B;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_3[0] = 0xA6;
-/* ; (10K, 0.68uF) */
- /* */
- /* Bytes for Ringing part 1 (03):1B,3B,9B,BA,D4,1C,B3,23 */
- j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_1[7] = 0x1B;
- j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_1[6] = 0x3C;
- j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_1[5] = 0x93;
- j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_1[4] = 0x3A;
- j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_1[3] = 0x22;
- j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_1[2] = 0x12;
- j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_1[1] = 0xA3;
- j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_1[0] = 0x23;
- /* Bytes for Ringing part 2 (06):13,42,A6,BA,D4,73,CA,D5 */
- j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_2[7] = 0x12;
- j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_2[6] = 0xA2;
- j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_2[5] = 0xA6;
- j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_2[4] = 0xBA;
- j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_2[3] = 0x22;
- j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_2[2] = 0x7A;
- j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_2[1] = 0x0A;
- j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_2[0] = 0xD5;
-
- /* Levelmetering Ringing (0D):B2,45,0F,8E */
- j->m_DAAShadowRegs.COP_REGS.COP.LevelmeteringRinging[3] = 0xAA;
- j->m_DAAShadowRegs.COP_REGS.COP.LevelmeteringRinging[2] = 0x35;
- j->m_DAAShadowRegs.COP_REGS.COP.LevelmeteringRinging[1] = 0x0F;
- j->m_DAAShadowRegs.COP_REGS.COP.LevelmeteringRinging[0] = 0x8E;
-
- /* Bytes for Ringing part 1 (03):1B,3B,9B,BA,D4,1C,B3,23 */
-/* j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_1[7] = 0x1C; */
-/* j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_1[6] = 0xB3; */
-/* j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_1[5] = 0xAB; */
-/* j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_1[4] = 0xAB; */
-/* j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_1[3] = 0x54; */
-/* j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_1[2] = 0x2D; */
-/* j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_1[1] = 0x62; */
-/* j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_1[0] = 0x2D; */
- /* Bytes for Ringing part 2 (06):13,42,A6,BA,D4,73,CA,D5 */
-/* j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_2[7] = 0x2D; */
-/* j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_2[6] = 0x62; */
-/* j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_2[5] = 0xA6; */
-/* j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_2[4] = 0xBB; */
-/* j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_2[3] = 0x2A; */
-/* j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_2[2] = 0x7D; */
-/* j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_2[1] = 0x0A; */
-/* j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_2[0] = 0xD4; */
-/* */
- /* Levelmetering Ringing (0D):B2,45,0F,8E */
-/* j->m_DAAShadowRegs.COP_REGS.COP.LevelmeteringRinging[3] = 0xAA; */
-/* j->m_DAAShadowRegs.COP_REGS.COP.LevelmeteringRinging[2] = 0x05; */
-/* j->m_DAAShadowRegs.COP_REGS.COP.LevelmeteringRinging[1] = 0x0F; */
-/* j->m_DAAShadowRegs.COP_REGS.COP.LevelmeteringRinging[0] = 0x8E; */
-
- /* Caller ID 1st Tone (0E):CA,0E,CA,09,99,99,99,99 */
- j->m_DAAShadowRegs.COP_REGS.COP.CallerID1stTone[7] = 0xCA;
- j->m_DAAShadowRegs.COP_REGS.COP.CallerID1stTone[6] = 0x0E;
- j->m_DAAShadowRegs.COP_REGS.COP.CallerID1stTone[5] = 0xCA;
- j->m_DAAShadowRegs.COP_REGS.COP.CallerID1stTone[4] = 0x09;
- j->m_DAAShadowRegs.COP_REGS.COP.CallerID1stTone[3] = 0x99;
- j->m_DAAShadowRegs.COP_REGS.COP.CallerID1stTone[2] = 0x99;
- j->m_DAAShadowRegs.COP_REGS.COP.CallerID1stTone[1] = 0x99;
- j->m_DAAShadowRegs.COP_REGS.COP.CallerID1stTone[0] = 0x99;
-/* Caller ID 2nd Tone (0F):FD,B5,BA,07,DA,00,00,00 */
- j->m_DAAShadowRegs.COP_REGS.COP.CallerID2ndTone[7] = 0xFD;
- j->m_DAAShadowRegs.COP_REGS.COP.CallerID2ndTone[6] = 0xB5;
- j->m_DAAShadowRegs.COP_REGS.COP.CallerID2ndTone[5] = 0xBA;
- j->m_DAAShadowRegs.COP_REGS.COP.CallerID2ndTone[4] = 0x07;
- j->m_DAAShadowRegs.COP_REGS.COP.CallerID2ndTone[3] = 0xDA;
- j->m_DAAShadowRegs.COP_REGS.COP.CallerID2ndTone[2] = 0x00;
- j->m_DAAShadowRegs.COP_REGS.COP.CallerID2ndTone[1] = 0x00;
- j->m_DAAShadowRegs.COP_REGS.COP.CallerID2ndTone[0] = 0x00;
-/* */
- /* ;CR Registers */
- /* Config. Reg. 0 (filters) (cr0):FE ; CLK gen. by crystal */
- j->m_DAAShadowRegs.SOP_REGS.SOP.cr0.reg = 0xFF;
-/* Config. Reg. 1 (dialing) (cr1):05 */
- j->m_DAAShadowRegs.SOP_REGS.SOP.cr1.reg = 0x05;
-/* Config. Reg. 2 (caller ID) (cr2):04 */
- j->m_DAAShadowRegs.SOP_REGS.SOP.cr2.reg = 0x04;
-/* Config. Reg. 3 (testloops) (cr3):03 ; SEL Bit==0, HP-disabled */
- j->m_DAAShadowRegs.SOP_REGS.SOP.cr3.reg = 0x00;
-/* Config. Reg. 4 (analog gain) (cr4):02 */
- j->m_DAAShadowRegs.SOP_REGS.SOP.cr4.reg = 0x02;
- /* Config. Reg. 5 (Version) (cr5):02 */
- /* Config. Reg. 6 (Reserved) (cr6):00 */
- /* Config. Reg. 7 (Reserved) (cr7):00 */
- /* */
- /* ;xr Registers */
- /* Ext. Reg. 0 (Interrupt Reg.) (xr0):02 */
-
- j->m_DAAShadowRegs.XOP_xr0_W.reg = 0x02; /* SO_1 set to '1' because it is inverted. */
- /* Ext. Reg. 1 (Interrupt enable) (xr1):3C Cadence, RING, Caller ID, VDD_OK */
-
- j->m_DAAShadowRegs.XOP_REGS.XOP.xr1.reg = 0x3C;
-/* Ext. Reg. 2 (Cadence Time Out) (xr2):7D */
- j->m_DAAShadowRegs.XOP_REGS.XOP.xr2.reg = 0x7D;
-/* Ext. Reg. 3 (DC Char) (xr3):32 ; B-Filter Off == 1 */
- j->m_DAAShadowRegs.XOP_REGS.XOP.xr3.reg = 0x3B; /*0x32; */
- /* Ext. Reg. 4 (Cadence) (xr4):00 */
-
- j->m_DAAShadowRegs.XOP_REGS.XOP.xr4.reg = 0x00;
-/* Ext. Reg. 5 (Ring timer) (xr5):22 */
- j->m_DAAShadowRegs.XOP_REGS.XOP.xr5.reg = 0x22;
-/* Ext. Reg. 6 (Power State) (xr6):00 */
- j->m_DAAShadowRegs.XOP_xr6_W.reg = 0x00;
-/* Ext. Reg. 7 (Vdd) (xr7):40 */
- j->m_DAAShadowRegs.XOP_REGS.XOP.xr7.reg = 0x40; /* 0x40 ??? Should it be 0x00? */
- /* */
- /* DTMF Tone 1 (0B): 11,B3,5A,2C ; 697 Hz */
- /* 12,33,5A,C3 ; 770 Hz */
- /* 13,3C,5B,32 ; 852 Hz */
- /* 1D,1B,5C,CC ; 941 Hz */
-
- j->m_DAAShadowRegs.COP_REGS.COP.Tone1Coeff[3] = 0x11;
- j->m_DAAShadowRegs.COP_REGS.COP.Tone1Coeff[2] = 0xB3;
- j->m_DAAShadowRegs.COP_REGS.COP.Tone1Coeff[1] = 0x5A;
- j->m_DAAShadowRegs.COP_REGS.COP.Tone1Coeff[0] = 0x2C;
-/* DTMF Tone 2 (0C): 32,32,52,B3 ; 1209 Hz */
- /* EC,1D,52,22 ; 1336 Hz */
- /* AA,AC,51,D2 ; 1477 Hz */
- /* 9B,3B,51,25 ; 1633 Hz */
- j->m_DAAShadowRegs.COP_REGS.COP.Tone2Coeff[3] = 0x32;
- j->m_DAAShadowRegs.COP_REGS.COP.Tone2Coeff[2] = 0x32;
- j->m_DAAShadowRegs.COP_REGS.COP.Tone2Coeff[1] = 0x52;
- j->m_DAAShadowRegs.COP_REGS.COP.Tone2Coeff[0] = 0xB3;
-}
-
-static void DAA_Coeff_UK(IXJ *j)
-{
- int i;
-
- j->daa_country = DAA_UK;
- /*----------------------------------------------- */
- /* CAO */
- for (i = 0; i < ALISDAA_CALLERID_SIZE; i++) {
- j->m_DAAShadowRegs.CAO_REGS.CAO.CallerID[i] = 0;
- }
-
-/* Bytes for IM-filter part 1 (04): 00,C2,BB,A8,CB,81,A0,00 */
- j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_1[7] = 0x00;
- j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_1[6] = 0xC2;
- j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_1[5] = 0xBB;
- j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_1[4] = 0xA8;
- j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_1[3] = 0xCB;
- j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_1[2] = 0x81;
- j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_1[1] = 0xA0;
- j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_1[0] = 0x00;
-/* Bytes for IM-filter part 2 (05): 40,00,00,0A,A4,33,E0,08 */
- j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_2[7] = 0x40;
- j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_2[6] = 0x00;
- j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_2[5] = 0x00;
- j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_2[4] = 0x0A;
- j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_2[3] = 0xA4;
- j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_2[2] = 0x33;
- j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_2[1] = 0xE0;
- j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_2[0] = 0x08;
-/* Bytes for FRX-filter (08): 07,9B,ED,24,B2,A2,A0,08 */
- j->m_DAAShadowRegs.COP_REGS.COP.FRXFilterCoeff[7] = 0x07;
- j->m_DAAShadowRegs.COP_REGS.COP.FRXFilterCoeff[6] = 0x9B;
- j->m_DAAShadowRegs.COP_REGS.COP.FRXFilterCoeff[5] = 0xED;
- j->m_DAAShadowRegs.COP_REGS.COP.FRXFilterCoeff[4] = 0x24;
- j->m_DAAShadowRegs.COP_REGS.COP.FRXFilterCoeff[3] = 0xB2;
- j->m_DAAShadowRegs.COP_REGS.COP.FRXFilterCoeff[2] = 0xA2;
- j->m_DAAShadowRegs.COP_REGS.COP.FRXFilterCoeff[1] = 0xA0;
- j->m_DAAShadowRegs.COP_REGS.COP.FRXFilterCoeff[0] = 0x08;
-/* Bytes for FRR-filter (07): 0F,92,F2,B2,87,D2,30,08 */
- j->m_DAAShadowRegs.COP_REGS.COP.FRRFilterCoeff[7] = 0x0F;
- j->m_DAAShadowRegs.COP_REGS.COP.FRRFilterCoeff[6] = 0x92;
- j->m_DAAShadowRegs.COP_REGS.COP.FRRFilterCoeff[5] = 0xF2;
- j->m_DAAShadowRegs.COP_REGS.COP.FRRFilterCoeff[4] = 0xB2;
- j->m_DAAShadowRegs.COP_REGS.COP.FRRFilterCoeff[3] = 0x87;
- j->m_DAAShadowRegs.COP_REGS.COP.FRRFilterCoeff[2] = 0xD2;
- j->m_DAAShadowRegs.COP_REGS.COP.FRRFilterCoeff[1] = 0x30;
- j->m_DAAShadowRegs.COP_REGS.COP.FRRFilterCoeff[0] = 0x08;
-/* Bytes for AX-filter (0A): 1B,A5,DD,CA */
- j->m_DAAShadowRegs.COP_REGS.COP.AXFilterCoeff[3] = 0x1B;
- j->m_DAAShadowRegs.COP_REGS.COP.AXFilterCoeff[2] = 0xA5;
- j->m_DAAShadowRegs.COP_REGS.COP.AXFilterCoeff[1] = 0xDD;
- j->m_DAAShadowRegs.COP_REGS.COP.AXFilterCoeff[0] = 0xCA;
-/* Bytes for AR-filter (09): E2,27,10,D6 */
- j->m_DAAShadowRegs.COP_REGS.COP.ARFilterCoeff[3] = 0xE2;
- j->m_DAAShadowRegs.COP_REGS.COP.ARFilterCoeff[2] = 0x27;
- j->m_DAAShadowRegs.COP_REGS.COP.ARFilterCoeff[1] = 0x10;
- j->m_DAAShadowRegs.COP_REGS.COP.ARFilterCoeff[0] = 0xD6;
-/* Bytes for TH-filter part 1 (00): 80,2D,38,8B,D0,00,00,98 */
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_1[7] = 0x80;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_1[6] = 0x2D;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_1[5] = 0x38;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_1[4] = 0x8B;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_1[3] = 0xD0;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_1[2] = 0x00;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_1[1] = 0x00;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_1[0] = 0x98;
-/* Bytes for TH-filter part 2 (01): 02,5A,53,F0,0B,5F,84,D4 */
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_2[7] = 0x02;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_2[6] = 0x5A;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_2[5] = 0x53;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_2[4] = 0xF0;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_2[3] = 0x0B;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_2[2] = 0x5F;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_2[1] = 0x84;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_2[0] = 0xD4;
-/* Bytes for TH-filter part 3 (02): 00,88,6A,A4,8F,52,F5,32 */
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_3[7] = 0x00;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_3[6] = 0x88;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_3[5] = 0x6A;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_3[4] = 0xA4;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_3[3] = 0x8F;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_3[2] = 0x52;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_3[1] = 0xF5;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_3[0] = 0x32;
-/* ; idle */
- /* Bytes for Ringing part 1 (03):1B,3C,93,3A,22,12,A3,23 */
- j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_1[7] = 0x1B;
- j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_1[6] = 0x3C;
- j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_1[5] = 0x93;
- j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_1[4] = 0x3A;
- j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_1[3] = 0x22;
- j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_1[2] = 0x12;
- j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_1[1] = 0xA3;
- j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_1[0] = 0x23;
-/* Bytes for Ringing part 2 (06):12,A2,A6,BA,22,7A,0A,D5 */
- j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_2[7] = 0x12;
- j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_2[6] = 0xA2;
- j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_2[5] = 0xA6;
- j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_2[4] = 0xBA;
- j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_2[3] = 0x22;
- j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_2[2] = 0x7A;
- j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_2[1] = 0x0A;
- j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_2[0] = 0xD5;
-/* Levelmetering Ringing (0D):AA,35,0F,8E ; 25Hz 30V less possible? */
- j->m_DAAShadowRegs.COP_REGS.COP.LevelmeteringRinging[3] = 0xAA;
- j->m_DAAShadowRegs.COP_REGS.COP.LevelmeteringRinging[2] = 0x35;
- j->m_DAAShadowRegs.COP_REGS.COP.LevelmeteringRinging[1] = 0x0F;
- j->m_DAAShadowRegs.COP_REGS.COP.LevelmeteringRinging[0] = 0x8E;
-/* Caller ID 1st Tone (0E):CA,0E,CA,09,99,99,99,99 */
- j->m_DAAShadowRegs.COP_REGS.COP.CallerID1stTone[7] = 0xCA;
- j->m_DAAShadowRegs.COP_REGS.COP.CallerID1stTone[6] = 0x0E;
- j->m_DAAShadowRegs.COP_REGS.COP.CallerID1stTone[5] = 0xCA;
- j->m_DAAShadowRegs.COP_REGS.COP.CallerID1stTone[4] = 0x09;
- j->m_DAAShadowRegs.COP_REGS.COP.CallerID1stTone[3] = 0x99;
- j->m_DAAShadowRegs.COP_REGS.COP.CallerID1stTone[2] = 0x99;
- j->m_DAAShadowRegs.COP_REGS.COP.CallerID1stTone[1] = 0x99;
- j->m_DAAShadowRegs.COP_REGS.COP.CallerID1stTone[0] = 0x99;
-/* Caller ID 2nd Tone (0F):FD,B5,BA,07,DA,00,00,00 */
- j->m_DAAShadowRegs.COP_REGS.COP.CallerID2ndTone[7] = 0xFD;
- j->m_DAAShadowRegs.COP_REGS.COP.CallerID2ndTone[6] = 0xB5;
- j->m_DAAShadowRegs.COP_REGS.COP.CallerID2ndTone[5] = 0xBA;
- j->m_DAAShadowRegs.COP_REGS.COP.CallerID2ndTone[4] = 0x07;
- j->m_DAAShadowRegs.COP_REGS.COP.CallerID2ndTone[3] = 0xDA;
- j->m_DAAShadowRegs.COP_REGS.COP.CallerID2ndTone[2] = 0x00;
- j->m_DAAShadowRegs.COP_REGS.COP.CallerID2ndTone[1] = 0x00;
- j->m_DAAShadowRegs.COP_REGS.COP.CallerID2ndTone[0] = 0x00;
-/* ;CR Registers */
- /* Config. Reg. 0 (filters) (cr0):FF */
- j->m_DAAShadowRegs.SOP_REGS.SOP.cr0.reg = 0xFF;
-/* Config. Reg. 1 (dialing) (cr1):05 */
- j->m_DAAShadowRegs.SOP_REGS.SOP.cr1.reg = 0x05;
-/* Config. Reg. 2 (caller ID) (cr2):04 */
- j->m_DAAShadowRegs.SOP_REGS.SOP.cr2.reg = 0x04;
-/* Config. Reg. 3 (testloops) (cr3):00 ; */
- j->m_DAAShadowRegs.SOP_REGS.SOP.cr3.reg = 0x00;
-/* Config. Reg. 4 (analog gain) (cr4):02 */
- j->m_DAAShadowRegs.SOP_REGS.SOP.cr4.reg = 0x02;
- /* Config. Reg. 5 (Version) (cr5):02 */
- /* Config. Reg. 6 (Reserved) (cr6):00 */
- /* Config. Reg. 7 (Reserved) (cr7):00 */
- /* ;xr Registers */
- /* Ext. Reg. 0 (Interrupt Reg.) (xr0):02 */
-
- j->m_DAAShadowRegs.XOP_xr0_W.reg = 0x02; /* SO_1 set to '1' because it is inverted. */
- /* Ext. Reg. 1 (Interrupt enable) (xr1):1C */
-
- j->m_DAAShadowRegs.XOP_REGS.XOP.xr1.reg = 0x1C; /* RING, Caller ID, VDD_OK */
- /* Ext. Reg. 2 (Cadence Time Out) (xr2):7D */
-
- j->m_DAAShadowRegs.XOP_REGS.XOP.xr2.reg = 0x7D;
-/* Ext. Reg. 3 (DC Char) (xr3):36 ; */
- j->m_DAAShadowRegs.XOP_REGS.XOP.xr3.reg = 0x36;
-/* Ext. Reg. 4 (Cadence) (xr4):00 */
- j->m_DAAShadowRegs.XOP_REGS.XOP.xr4.reg = 0x00;
-/* Ext. Reg. 5 (Ring timer) (xr5):22 */
- j->m_DAAShadowRegs.XOP_REGS.XOP.xr5.reg = 0x22;
-/* Ext. Reg. 6 (Power State) (xr6):00 */
- j->m_DAAShadowRegs.XOP_xr6_W.reg = 0x00;
-/* Ext. Reg. 7 (Vdd) (xr7):46 */
- j->m_DAAShadowRegs.XOP_REGS.XOP.xr7.reg = 0x46; /* 0x46 ??? Should it be 0x00? */
- /* DTMF Tone 1 (0B): 11,B3,5A,2C ; 697 Hz */
- /* 12,33,5A,C3 ; 770 Hz */
- /* 13,3C,5B,32 ; 852 Hz */
- /* 1D,1B,5C,CC ; 941 Hz */
-
- j->m_DAAShadowRegs.COP_REGS.COP.Tone1Coeff[3] = 0x11;
- j->m_DAAShadowRegs.COP_REGS.COP.Tone1Coeff[2] = 0xB3;
- j->m_DAAShadowRegs.COP_REGS.COP.Tone1Coeff[1] = 0x5A;
- j->m_DAAShadowRegs.COP_REGS.COP.Tone1Coeff[0] = 0x2C;
-/* DTMF Tone 2 (0C): 32,32,52,B3 ; 1209 Hz */
- /* EC,1D,52,22 ; 1336 Hz */
- /* AA,AC,51,D2 ; 1477 Hz */
- /* 9B,3B,51,25 ; 1633 Hz */
- j->m_DAAShadowRegs.COP_REGS.COP.Tone2Coeff[3] = 0x32;
- j->m_DAAShadowRegs.COP_REGS.COP.Tone2Coeff[2] = 0x32;
- j->m_DAAShadowRegs.COP_REGS.COP.Tone2Coeff[1] = 0x52;
- j->m_DAAShadowRegs.COP_REGS.COP.Tone2Coeff[0] = 0xB3;
-}
-
-
-static void DAA_Coeff_France(IXJ *j)
-{
- int i;
-
- j->daa_country = DAA_FRANCE;
- /*----------------------------------------------- */
- /* CAO */
- for (i = 0; i < ALISDAA_CALLERID_SIZE; i++) {
- j->m_DAAShadowRegs.CAO_REGS.CAO.CallerID[i] = 0;
- }
-
-/* Bytes for IM-filter part 1 (04): 02,A2,43,2C,22,AF,A0,00 */
- j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_1[7] = 0x02;
- j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_1[6] = 0xA2;
- j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_1[5] = 0x43;
- j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_1[4] = 0x2C;
- j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_1[3] = 0x22;
- j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_1[2] = 0xAF;
- j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_1[1] = 0xA0;
- j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_1[0] = 0x00;
-/* Bytes for IM-filter part 2 (05): 67,CE,00,0C,22,33,E0,08 */
- j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_2[7] = 0x67;
- j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_2[6] = 0xCE;
- j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_2[5] = 0x00;
- j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_2[4] = 0x2C;
- j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_2[3] = 0x22;
- j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_2[2] = 0x33;
- j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_2[1] = 0xE0;
- j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_2[0] = 0x08;
-/* Bytes for FRX-filter (08): 07,9A,28,F6,23,4A,B0,08 */
- j->m_DAAShadowRegs.COP_REGS.COP.FRXFilterCoeff[7] = 0x07;
- j->m_DAAShadowRegs.COP_REGS.COP.FRXFilterCoeff[6] = 0x9A;
- j->m_DAAShadowRegs.COP_REGS.COP.FRXFilterCoeff[5] = 0x28;
- j->m_DAAShadowRegs.COP_REGS.COP.FRXFilterCoeff[4] = 0xF6;
- j->m_DAAShadowRegs.COP_REGS.COP.FRXFilterCoeff[3] = 0x23;
- j->m_DAAShadowRegs.COP_REGS.COP.FRXFilterCoeff[2] = 0x4A;
- j->m_DAAShadowRegs.COP_REGS.COP.FRXFilterCoeff[1] = 0xB0;
- j->m_DAAShadowRegs.COP_REGS.COP.FRXFilterCoeff[0] = 0x08;
-/* Bytes for FRR-filter (07): 03,8F,F9,2F,9E,FA,20,08 */
- j->m_DAAShadowRegs.COP_REGS.COP.FRRFilterCoeff[7] = 0x03;
- j->m_DAAShadowRegs.COP_REGS.COP.FRRFilterCoeff[6] = 0x8F;
- j->m_DAAShadowRegs.COP_REGS.COP.FRRFilterCoeff[5] = 0xF9;
- j->m_DAAShadowRegs.COP_REGS.COP.FRRFilterCoeff[4] = 0x2F;
- j->m_DAAShadowRegs.COP_REGS.COP.FRRFilterCoeff[3] = 0x9E;
- j->m_DAAShadowRegs.COP_REGS.COP.FRRFilterCoeff[2] = 0xFA;
- j->m_DAAShadowRegs.COP_REGS.COP.FRRFilterCoeff[1] = 0x20;
- j->m_DAAShadowRegs.COP_REGS.COP.FRRFilterCoeff[0] = 0x08;
-/* Bytes for AX-filter (0A): 16,B5,DD,CA */
- j->m_DAAShadowRegs.COP_REGS.COP.AXFilterCoeff[3] = 0x16;
- j->m_DAAShadowRegs.COP_REGS.COP.AXFilterCoeff[2] = 0xB5;
- j->m_DAAShadowRegs.COP_REGS.COP.AXFilterCoeff[1] = 0xDD;
- j->m_DAAShadowRegs.COP_REGS.COP.AXFilterCoeff[0] = 0xCA;
-/* Bytes for AR-filter (09): 52,C7,10,D6 */
- j->m_DAAShadowRegs.COP_REGS.COP.ARFilterCoeff[3] = 0xE2;
- j->m_DAAShadowRegs.COP_REGS.COP.ARFilterCoeff[2] = 0xC7;
- j->m_DAAShadowRegs.COP_REGS.COP.ARFilterCoeff[1] = 0x10;
- j->m_DAAShadowRegs.COP_REGS.COP.ARFilterCoeff[0] = 0xD6;
-/* Bytes for TH-filter part 1 (00): 00,42,48,81,A6,80,00,98 */
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_1[7] = 0x00;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_1[6] = 0x42;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_1[5] = 0x48;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_1[4] = 0x81;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_1[3] = 0xA6;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_1[2] = 0x80;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_1[1] = 0x00;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_1[0] = 0x98;
-/* Bytes for TH-filter part 2 (01): 02,AC,2A,30,78,AC,8A,2C */
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_2[7] = 0x02;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_2[6] = 0xAC;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_2[5] = 0x2A;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_2[4] = 0x30;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_2[3] = 0x78;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_2[2] = 0xAC;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_2[1] = 0x8A;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_2[0] = 0x2C;
-/* Bytes for TH-filter part 3 (02): 00,88,DA,A5,22,BA,2C,45 */
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_3[7] = 0x00;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_3[6] = 0x88;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_3[5] = 0xDA;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_3[4] = 0xA5;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_3[3] = 0x22;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_3[2] = 0xBA;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_3[1] = 0x2C;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_3[0] = 0x45;
-/* ; idle */
- /* Bytes for Ringing part 1 (03):1B,3C,93,3A,22,12,A3,23 */
- j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_1[7] = 0x1B;
- j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_1[6] = 0x3C;
- j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_1[5] = 0x93;
- j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_1[4] = 0x3A;
- j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_1[3] = 0x22;
- j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_1[2] = 0x12;
- j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_1[1] = 0xA3;
- j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_1[0] = 0x23;
-/* Bytes for Ringing part 2 (06):12,A2,A6,BA,22,7A,0A,D5 */
- j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_2[7] = 0x12;
- j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_2[6] = 0xA2;
- j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_2[5] = 0xA6;
- j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_2[4] = 0xBA;
- j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_2[3] = 0x22;
- j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_2[2] = 0x7A;
- j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_2[1] = 0x0A;
- j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_2[0] = 0xD5;
-/* Levelmetering Ringing (0D):32,45,B5,84 ; 50Hz 20V */
- j->m_DAAShadowRegs.COP_REGS.COP.LevelmeteringRinging[3] = 0x32;
- j->m_DAAShadowRegs.COP_REGS.COP.LevelmeteringRinging[2] = 0x45;
- j->m_DAAShadowRegs.COP_REGS.COP.LevelmeteringRinging[1] = 0xB5;
- j->m_DAAShadowRegs.COP_REGS.COP.LevelmeteringRinging[0] = 0x84;
-/* Caller ID 1st Tone (0E):CA,0E,CA,09,99,99,99,99 */
- j->m_DAAShadowRegs.COP_REGS.COP.CallerID1stTone[7] = 0xCA;
- j->m_DAAShadowRegs.COP_REGS.COP.CallerID1stTone[6] = 0x0E;
- j->m_DAAShadowRegs.COP_REGS.COP.CallerID1stTone[5] = 0xCA;
- j->m_DAAShadowRegs.COP_REGS.COP.CallerID1stTone[4] = 0x09;
- j->m_DAAShadowRegs.COP_REGS.COP.CallerID1stTone[3] = 0x99;
- j->m_DAAShadowRegs.COP_REGS.COP.CallerID1stTone[2] = 0x99;
- j->m_DAAShadowRegs.COP_REGS.COP.CallerID1stTone[1] = 0x99;
- j->m_DAAShadowRegs.COP_REGS.COP.CallerID1stTone[0] = 0x99;
-/* Caller ID 2nd Tone (0F):FD,B5,BA,07,DA,00,00,00 */
- j->m_DAAShadowRegs.COP_REGS.COP.CallerID2ndTone[7] = 0xFD;
- j->m_DAAShadowRegs.COP_REGS.COP.CallerID2ndTone[6] = 0xB5;
- j->m_DAAShadowRegs.COP_REGS.COP.CallerID2ndTone[5] = 0xBA;
- j->m_DAAShadowRegs.COP_REGS.COP.CallerID2ndTone[4] = 0x07;
- j->m_DAAShadowRegs.COP_REGS.COP.CallerID2ndTone[3] = 0xDA;
- j->m_DAAShadowRegs.COP_REGS.COP.CallerID2ndTone[2] = 0x00;
- j->m_DAAShadowRegs.COP_REGS.COP.CallerID2ndTone[1] = 0x00;
- j->m_DAAShadowRegs.COP_REGS.COP.CallerID2ndTone[0] = 0x00;
-/* ;CR Registers */
- /* Config. Reg. 0 (filters) (cr0):FF */
- j->m_DAAShadowRegs.SOP_REGS.SOP.cr0.reg = 0xFF;
-/* Config. Reg. 1 (dialing) (cr1):05 */
- j->m_DAAShadowRegs.SOP_REGS.SOP.cr1.reg = 0x05;
-/* Config. Reg. 2 (caller ID) (cr2):04 */
- j->m_DAAShadowRegs.SOP_REGS.SOP.cr2.reg = 0x04;
-/* Config. Reg. 3 (testloops) (cr3):00 ; */
- j->m_DAAShadowRegs.SOP_REGS.SOP.cr3.reg = 0x00;
-/* Config. Reg. 4 (analog gain) (cr4):02 */
- j->m_DAAShadowRegs.SOP_REGS.SOP.cr4.reg = 0x02;
- /* Config. Reg. 5 (Version) (cr5):02 */
- /* Config. Reg. 6 (Reserved) (cr6):00 */
- /* Config. Reg. 7 (Reserved) (cr7):00 */
- /* ;xr Registers */
- /* Ext. Reg. 0 (Interrupt Reg.) (xr0):02 */
-
- j->m_DAAShadowRegs.XOP_xr0_W.reg = 0x02; /* SO_1 set to '1' because it is inverted. */
- /* Ext. Reg. 1 (Interrupt enable) (xr1):1C */
-
- j->m_DAAShadowRegs.XOP_REGS.XOP.xr1.reg = 0x1C; /* RING, Caller ID, VDD_OK */
- /* Ext. Reg. 2 (Cadence Time Out) (xr2):7D */
-
- j->m_DAAShadowRegs.XOP_REGS.XOP.xr2.reg = 0x7D;
-/* Ext. Reg. 3 (DC Char) (xr3):36 ; */
- j->m_DAAShadowRegs.XOP_REGS.XOP.xr3.reg = 0x36;
-/* Ext. Reg. 4 (Cadence) (xr4):00 */
- j->m_DAAShadowRegs.XOP_REGS.XOP.xr4.reg = 0x00;
-/* Ext. Reg. 5 (Ring timer) (xr5):22 */
- j->m_DAAShadowRegs.XOP_REGS.XOP.xr5.reg = 0x22;
-/* Ext. Reg. 6 (Power State) (xr6):00 */
- j->m_DAAShadowRegs.XOP_xr6_W.reg = 0x00;
-/* Ext. Reg. 7 (Vdd) (xr7):46 */
- j->m_DAAShadowRegs.XOP_REGS.XOP.xr7.reg = 0x46; /* 0x46 ??? Should it be 0x00? */
- /* DTMF Tone 1 (0B): 11,B3,5A,2C ; 697 Hz */
- /* 12,33,5A,C3 ; 770 Hz */
- /* 13,3C,5B,32 ; 852 Hz */
- /* 1D,1B,5C,CC ; 941 Hz */
-
- j->m_DAAShadowRegs.COP_REGS.COP.Tone1Coeff[3] = 0x11;
- j->m_DAAShadowRegs.COP_REGS.COP.Tone1Coeff[2] = 0xB3;
- j->m_DAAShadowRegs.COP_REGS.COP.Tone1Coeff[1] = 0x5A;
- j->m_DAAShadowRegs.COP_REGS.COP.Tone1Coeff[0] = 0x2C;
-/* DTMF Tone 2 (0C): 32,32,52,B3 ; 1209 Hz */
- /* EC,1D,52,22 ; 1336 Hz */
- /* AA,AC,51,D2 ; 1477 Hz */
- /* 9B,3B,51,25 ; 1633 Hz */
- j->m_DAAShadowRegs.COP_REGS.COP.Tone2Coeff[3] = 0x32;
- j->m_DAAShadowRegs.COP_REGS.COP.Tone2Coeff[2] = 0x32;
- j->m_DAAShadowRegs.COP_REGS.COP.Tone2Coeff[1] = 0x52;
- j->m_DAAShadowRegs.COP_REGS.COP.Tone2Coeff[0] = 0xB3;
-}
-
-
-static void DAA_Coeff_Germany(IXJ *j)
-{
- int i;
-
- j->daa_country = DAA_GERMANY;
- /*----------------------------------------------- */
- /* CAO */
- for (i = 0; i < ALISDAA_CALLERID_SIZE; i++) {
- j->m_DAAShadowRegs.CAO_REGS.CAO.CallerID[i] = 0;
- }
-
-/* Bytes for IM-filter part 1 (04): 00,CE,BB,B8,D2,81,B0,00 */
- j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_1[7] = 0x00;
- j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_1[6] = 0xCE;
- j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_1[5] = 0xBB;
- j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_1[4] = 0xB8;
- j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_1[3] = 0xD2;
- j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_1[2] = 0x81;
- j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_1[1] = 0xB0;
- j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_1[0] = 0x00;
-/* Bytes for IM-filter part 2 (05): 45,8F,00,0C,D2,3A,D0,08 */
- j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_2[7] = 0x45;
- j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_2[6] = 0x8F;
- j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_2[5] = 0x00;
- j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_2[4] = 0x0C;
- j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_2[3] = 0xD2;
- j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_2[2] = 0x3A;
- j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_2[1] = 0xD0;
- j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_2[0] = 0x08;
-/* Bytes for FRX-filter (08): 07,AA,E2,34,24,89,20,08 */
- j->m_DAAShadowRegs.COP_REGS.COP.FRXFilterCoeff[7] = 0x07;
- j->m_DAAShadowRegs.COP_REGS.COP.FRXFilterCoeff[6] = 0xAA;
- j->m_DAAShadowRegs.COP_REGS.COP.FRXFilterCoeff[5] = 0xE2;
- j->m_DAAShadowRegs.COP_REGS.COP.FRXFilterCoeff[4] = 0x34;
- j->m_DAAShadowRegs.COP_REGS.COP.FRXFilterCoeff[3] = 0x24;
- j->m_DAAShadowRegs.COP_REGS.COP.FRXFilterCoeff[2] = 0x89;
- j->m_DAAShadowRegs.COP_REGS.COP.FRXFilterCoeff[1] = 0x20;
- j->m_DAAShadowRegs.COP_REGS.COP.FRXFilterCoeff[0] = 0x08;
-/* Bytes for FRR-filter (07): 02,87,FA,37,9A,CA,B0,08 */
- j->m_DAAShadowRegs.COP_REGS.COP.FRRFilterCoeff[7] = 0x02;
- j->m_DAAShadowRegs.COP_REGS.COP.FRRFilterCoeff[6] = 0x87;
- j->m_DAAShadowRegs.COP_REGS.COP.FRRFilterCoeff[5] = 0xFA;
- j->m_DAAShadowRegs.COP_REGS.COP.FRRFilterCoeff[4] = 0x37;
- j->m_DAAShadowRegs.COP_REGS.COP.FRRFilterCoeff[3] = 0x9A;
- j->m_DAAShadowRegs.COP_REGS.COP.FRRFilterCoeff[2] = 0xCA;
- j->m_DAAShadowRegs.COP_REGS.COP.FRRFilterCoeff[1] = 0xB0;
- j->m_DAAShadowRegs.COP_REGS.COP.FRRFilterCoeff[0] = 0x08;
-/* Bytes for AX-filter (0A): 72,D5,DD,CA */
- j->m_DAAShadowRegs.COP_REGS.COP.AXFilterCoeff[3] = 0x72;
- j->m_DAAShadowRegs.COP_REGS.COP.AXFilterCoeff[2] = 0xD5;
- j->m_DAAShadowRegs.COP_REGS.COP.AXFilterCoeff[1] = 0xDD;
- j->m_DAAShadowRegs.COP_REGS.COP.AXFilterCoeff[0] = 0xCA;
-/* Bytes for AR-filter (09): 72,42,13,4B */
- j->m_DAAShadowRegs.COP_REGS.COP.ARFilterCoeff[3] = 0x72;
- j->m_DAAShadowRegs.COP_REGS.COP.ARFilterCoeff[2] = 0x42;
- j->m_DAAShadowRegs.COP_REGS.COP.ARFilterCoeff[1] = 0x13;
- j->m_DAAShadowRegs.COP_REGS.COP.ARFilterCoeff[0] = 0x4B;
-/* Bytes for TH-filter part 1 (00): 80,52,48,81,AD,80,00,98 */
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_1[7] = 0x80;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_1[6] = 0x52;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_1[5] = 0x48;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_1[4] = 0x81;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_1[3] = 0xAD;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_1[2] = 0x80;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_1[1] = 0x00;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_1[0] = 0x98;
-/* Bytes for TH-filter part 2 (01): 02,42,5A,20,E8,1A,81,27 */
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_2[7] = 0x02;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_2[6] = 0x42;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_2[5] = 0x5A;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_2[4] = 0x20;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_2[3] = 0xE8;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_2[2] = 0x1A;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_2[1] = 0x81;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_2[0] = 0x27;
-/* Bytes for TH-filter part 3 (02): 00,88,63,26,BD,4B,A3,C2 */
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_3[7] = 0x00;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_3[6] = 0x88;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_3[5] = 0x63;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_3[4] = 0x26;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_3[3] = 0xBD;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_3[2] = 0x4B;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_3[1] = 0xA3;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_3[0] = 0xC2;
-/* ; (10K, 0.68uF) */
- /* Bytes for Ringing part 1 (03):1B,3B,9B,BA,D4,1C,B3,23 */
- j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_1[7] = 0x1B;
- j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_1[6] = 0x3B;
- j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_1[5] = 0x9B;
- j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_1[4] = 0xBA;
- j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_1[3] = 0xD4;
- j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_1[2] = 0x1C;
- j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_1[1] = 0xB3;
- j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_1[0] = 0x23;
-/* Bytes for Ringing part 2 (06):13,42,A6,BA,D4,73,CA,D5 */
- j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_2[7] = 0x13;
- j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_2[6] = 0x42;
- j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_2[5] = 0xA6;
- j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_2[4] = 0xBA;
- j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_2[3] = 0xD4;
- j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_2[2] = 0x73;
- j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_2[1] = 0xCA;
- j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_2[0] = 0xD5;
-/* Levelmetering Ringing (0D):B2,45,0F,8E */
- j->m_DAAShadowRegs.COP_REGS.COP.LevelmeteringRinging[3] = 0xB2;
- j->m_DAAShadowRegs.COP_REGS.COP.LevelmeteringRinging[2] = 0x45;
- j->m_DAAShadowRegs.COP_REGS.COP.LevelmeteringRinging[1] = 0x0F;
- j->m_DAAShadowRegs.COP_REGS.COP.LevelmeteringRinging[0] = 0x8E;
-/* Caller ID 1st Tone (0E):CA,0E,CA,09,99,99,99,99 */
- j->m_DAAShadowRegs.COP_REGS.COP.CallerID1stTone[7] = 0xCA;
- j->m_DAAShadowRegs.COP_REGS.COP.CallerID1stTone[6] = 0x0E;
- j->m_DAAShadowRegs.COP_REGS.COP.CallerID1stTone[5] = 0xCA;
- j->m_DAAShadowRegs.COP_REGS.COP.CallerID1stTone[4] = 0x09;
- j->m_DAAShadowRegs.COP_REGS.COP.CallerID1stTone[3] = 0x99;
- j->m_DAAShadowRegs.COP_REGS.COP.CallerID1stTone[2] = 0x99;
- j->m_DAAShadowRegs.COP_REGS.COP.CallerID1stTone[1] = 0x99;
- j->m_DAAShadowRegs.COP_REGS.COP.CallerID1stTone[0] = 0x99;
-/* Caller ID 2nd Tone (0F):FD,B5,BA,07,DA,00,00,00 */
- j->m_DAAShadowRegs.COP_REGS.COP.CallerID2ndTone[7] = 0xFD;
- j->m_DAAShadowRegs.COP_REGS.COP.CallerID2ndTone[6] = 0xB5;
- j->m_DAAShadowRegs.COP_REGS.COP.CallerID2ndTone[5] = 0xBA;
- j->m_DAAShadowRegs.COP_REGS.COP.CallerID2ndTone[4] = 0x07;
- j->m_DAAShadowRegs.COP_REGS.COP.CallerID2ndTone[3] = 0xDA;
- j->m_DAAShadowRegs.COP_REGS.COP.CallerID2ndTone[2] = 0x00;
- j->m_DAAShadowRegs.COP_REGS.COP.CallerID2ndTone[1] = 0x00;
- j->m_DAAShadowRegs.COP_REGS.COP.CallerID2ndTone[0] = 0x00;
-/* ;CR Registers */
- /* Config. Reg. 0 (filters) (cr0):FF ; all Filters enabled, CLK from ext. source */
- j->m_DAAShadowRegs.SOP_REGS.SOP.cr0.reg = 0xFF;
-/* Config. Reg. 1 (dialing) (cr1):05 ; Manual Ring, Ring metering enabled */
- j->m_DAAShadowRegs.SOP_REGS.SOP.cr1.reg = 0x05;
-/* Config. Reg. 2 (caller ID) (cr2):04 ; Analog Gain 0dB, FSC internal */
- j->m_DAAShadowRegs.SOP_REGS.SOP.cr2.reg = 0x04;
-/* Config. Reg. 3 (testloops) (cr3):00 ; SEL Bit==0, HP-enabled */
- j->m_DAAShadowRegs.SOP_REGS.SOP.cr3.reg = 0x00;
-/* Config. Reg. 4 (analog gain) (cr4):02 */
- j->m_DAAShadowRegs.SOP_REGS.SOP.cr4.reg = 0x02;
- /* Config. Reg. 5 (Version) (cr5):02 */
- /* Config. Reg. 6 (Reserved) (cr6):00 */
- /* Config. Reg. 7 (Reserved) (cr7):00 */
- /* ;xr Registers */
- /* Ext. Reg. 0 (Interrupt Reg.) (xr0):02 */
-
- j->m_DAAShadowRegs.XOP_xr0_W.reg = 0x02; /* SO_1 set to '1' because it is inverted. */
- /* Ext. Reg. 1 (Interrupt enable) (xr1):1C ; Ring, CID, VDDOK Interrupts enabled */
-
- j->m_DAAShadowRegs.XOP_REGS.XOP.xr1.reg = 0x1C; /* RING, Caller ID, VDD_OK */
- /* Ext. Reg. 2 (Cadence Time Out) (xr2):7D */
-
- j->m_DAAShadowRegs.XOP_REGS.XOP.xr2.reg = 0x7D;
-/* Ext. Reg. 3 (DC Char) (xr3):32 ; B-Filter Off==1, U0=3.5V, R=200Ohm */
- j->m_DAAShadowRegs.XOP_REGS.XOP.xr3.reg = 0x32;
-/* Ext. Reg. 4 (Cadence) (xr4):00 */
- j->m_DAAShadowRegs.XOP_REGS.XOP.xr4.reg = 0x00;
-/* Ext. Reg. 5 (Ring timer) (xr5):22 */
- j->m_DAAShadowRegs.XOP_REGS.XOP.xr5.reg = 0x22;
-/* Ext. Reg. 6 (Power State) (xr6):00 */
- j->m_DAAShadowRegs.XOP_xr6_W.reg = 0x00;
-/* Ext. Reg. 7 (Vdd) (xr7):40 ; VDD=4.25 V */
- j->m_DAAShadowRegs.XOP_REGS.XOP.xr7.reg = 0x40; /* 0x40 ??? Should it be 0x00? */
- /* DTMF Tone 1 (0B): 11,B3,5A,2C ; 697 Hz */
- /* 12,33,5A,C3 ; 770 Hz */
- /* 13,3C,5B,32 ; 852 Hz */
- /* 1D,1B,5C,CC ; 941 Hz */
-
- j->m_DAAShadowRegs.COP_REGS.COP.Tone1Coeff[3] = 0x11;
- j->m_DAAShadowRegs.COP_REGS.COP.Tone1Coeff[2] = 0xB3;
- j->m_DAAShadowRegs.COP_REGS.COP.Tone1Coeff[1] = 0x5A;
- j->m_DAAShadowRegs.COP_REGS.COP.Tone1Coeff[0] = 0x2C;
-/* DTMF Tone 2 (0C): 32,32,52,B3 ; 1209 Hz */
- /* EC,1D,52,22 ; 1336 Hz */
- /* AA,AC,51,D2 ; 1477 Hz */
- /* 9B,3B,51,25 ; 1633 Hz */
- j->m_DAAShadowRegs.COP_REGS.COP.Tone2Coeff[3] = 0x32;
- j->m_DAAShadowRegs.COP_REGS.COP.Tone2Coeff[2] = 0x32;
- j->m_DAAShadowRegs.COP_REGS.COP.Tone2Coeff[1] = 0x52;
- j->m_DAAShadowRegs.COP_REGS.COP.Tone2Coeff[0] = 0xB3;
-}
-
-
-static void DAA_Coeff_Australia(IXJ *j)
-{
- int i;
-
- j->daa_country = DAA_AUSTRALIA;
- /*----------------------------------------------- */
- /* CAO */
- for (i = 0; i < ALISDAA_CALLERID_SIZE; i++) {
- j->m_DAAShadowRegs.CAO_REGS.CAO.CallerID[i] = 0;
- }
-
-/* Bytes for IM-filter part 1 (04): 00,A3,AA,28,B3,82,D0,00 */
- j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_1[7] = 0x00;
- j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_1[6] = 0xA3;
- j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_1[5] = 0xAA;
- j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_1[4] = 0x28;
- j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_1[3] = 0xB3;
- j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_1[2] = 0x82;
- j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_1[1] = 0xD0;
- j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_1[0] = 0x00;
-/* Bytes for IM-filter part 2 (05): 70,96,00,09,32,6B,C0,08 */
- j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_2[7] = 0x70;
- j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_2[6] = 0x96;
- j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_2[5] = 0x00;
- j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_2[4] = 0x09;
- j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_2[3] = 0x32;
- j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_2[2] = 0x6B;
- j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_2[1] = 0xC0;
- j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_2[0] = 0x08;
-/* Bytes for FRX-filter (08): 07,96,E2,34,32,9B,30,08 */
- j->m_DAAShadowRegs.COP_REGS.COP.FRXFilterCoeff[7] = 0x07;
- j->m_DAAShadowRegs.COP_REGS.COP.FRXFilterCoeff[6] = 0x96;
- j->m_DAAShadowRegs.COP_REGS.COP.FRXFilterCoeff[5] = 0xE2;
- j->m_DAAShadowRegs.COP_REGS.COP.FRXFilterCoeff[4] = 0x34;
- j->m_DAAShadowRegs.COP_REGS.COP.FRXFilterCoeff[3] = 0x32;
- j->m_DAAShadowRegs.COP_REGS.COP.FRXFilterCoeff[2] = 0x9B;
- j->m_DAAShadowRegs.COP_REGS.COP.FRXFilterCoeff[1] = 0x30;
- j->m_DAAShadowRegs.COP_REGS.COP.FRXFilterCoeff[0] = 0x08;
-/* Bytes for FRR-filter (07): 0F,9A,E9,2F,22,CC,A0,08 */
- j->m_DAAShadowRegs.COP_REGS.COP.FRRFilterCoeff[7] = 0x0F;
- j->m_DAAShadowRegs.COP_REGS.COP.FRRFilterCoeff[6] = 0x9A;
- j->m_DAAShadowRegs.COP_REGS.COP.FRRFilterCoeff[5] = 0xE9;
- j->m_DAAShadowRegs.COP_REGS.COP.FRRFilterCoeff[4] = 0x2F;
- j->m_DAAShadowRegs.COP_REGS.COP.FRRFilterCoeff[3] = 0x22;
- j->m_DAAShadowRegs.COP_REGS.COP.FRRFilterCoeff[2] = 0xCC;
- j->m_DAAShadowRegs.COP_REGS.COP.FRRFilterCoeff[1] = 0xA0;
- j->m_DAAShadowRegs.COP_REGS.COP.FRRFilterCoeff[0] = 0x08;
-/* Bytes for AX-filter (0A): CB,45,DD,CA */
- j->m_DAAShadowRegs.COP_REGS.COP.AXFilterCoeff[3] = 0xCB;
- j->m_DAAShadowRegs.COP_REGS.COP.AXFilterCoeff[2] = 0x45;
- j->m_DAAShadowRegs.COP_REGS.COP.AXFilterCoeff[1] = 0xDD;
- j->m_DAAShadowRegs.COP_REGS.COP.AXFilterCoeff[0] = 0xCA;
-/* Bytes for AR-filter (09): 1B,67,10,D6 */
- j->m_DAAShadowRegs.COP_REGS.COP.ARFilterCoeff[3] = 0x1B;
- j->m_DAAShadowRegs.COP_REGS.COP.ARFilterCoeff[2] = 0x67;
- j->m_DAAShadowRegs.COP_REGS.COP.ARFilterCoeff[1] = 0x10;
- j->m_DAAShadowRegs.COP_REGS.COP.ARFilterCoeff[0] = 0xD6;
-/* Bytes for TH-filter part 1 (00): 80,52,48,81,AF,80,00,98 */
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_1[7] = 0x80;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_1[6] = 0x52;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_1[5] = 0x48;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_1[4] = 0x81;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_1[3] = 0xAF;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_1[2] = 0x80;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_1[1] = 0x00;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_1[0] = 0x98;
-/* Bytes for TH-filter part 2 (01): 02,DB,52,B0,38,01,82,AC */
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_2[7] = 0x02;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_2[6] = 0xDB;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_2[5] = 0x52;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_2[4] = 0xB0;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_2[3] = 0x38;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_2[2] = 0x01;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_2[1] = 0x82;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_2[0] = 0xAC;
-/* Bytes for TH-filter part 3 (02): 00,88,4A,3E,2C,3B,24,46 */
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_3[7] = 0x00;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_3[6] = 0x88;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_3[5] = 0x4A;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_3[4] = 0x3E;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_3[3] = 0x2C;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_3[2] = 0x3B;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_3[1] = 0x24;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_3[0] = 0x46;
-/* ; idle */
- /* Bytes for Ringing part 1 (03):1B,3C,93,3A,22,12,A3,23 */
- j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_1[7] = 0x1B;
- j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_1[6] = 0x3C;
- j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_1[5] = 0x93;
- j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_1[4] = 0x3A;
- j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_1[3] = 0x22;
- j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_1[2] = 0x12;
- j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_1[1] = 0xA3;
- j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_1[0] = 0x23;
-/* Bytes for Ringing part 2 (06):12,A2,A6,BA,22,7A,0A,D5 */
- j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_2[7] = 0x12;
- j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_2[6] = 0xA2;
- j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_2[5] = 0xA6;
- j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_2[4] = 0xBA;
- j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_2[3] = 0x22;
- j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_2[2] = 0x7A;
- j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_2[1] = 0x0A;
- j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_2[0] = 0xD5;
-/* Levelmetering Ringing (0D):32,45,B5,84 ; 50Hz 20V */
- j->m_DAAShadowRegs.COP_REGS.COP.LevelmeteringRinging[3] = 0x32;
- j->m_DAAShadowRegs.COP_REGS.COP.LevelmeteringRinging[2] = 0x45;
- j->m_DAAShadowRegs.COP_REGS.COP.LevelmeteringRinging[1] = 0xB5;
- j->m_DAAShadowRegs.COP_REGS.COP.LevelmeteringRinging[0] = 0x84;
-/* Caller ID 1st Tone (0E):CA,0E,CA,09,99,99,99,99 */
- j->m_DAAShadowRegs.COP_REGS.COP.CallerID1stTone[7] = 0xCA;
- j->m_DAAShadowRegs.COP_REGS.COP.CallerID1stTone[6] = 0x0E;
- j->m_DAAShadowRegs.COP_REGS.COP.CallerID1stTone[5] = 0xCA;
- j->m_DAAShadowRegs.COP_REGS.COP.CallerID1stTone[4] = 0x09;
- j->m_DAAShadowRegs.COP_REGS.COP.CallerID1stTone[3] = 0x99;
- j->m_DAAShadowRegs.COP_REGS.COP.CallerID1stTone[2] = 0x99;
- j->m_DAAShadowRegs.COP_REGS.COP.CallerID1stTone[1] = 0x99;
- j->m_DAAShadowRegs.COP_REGS.COP.CallerID1stTone[0] = 0x99;
-/* Caller ID 2nd Tone (0F):FD,B5,BA,07,DA,00,00,00 */
- j->m_DAAShadowRegs.COP_REGS.COP.CallerID2ndTone[7] = 0xFD;
- j->m_DAAShadowRegs.COP_REGS.COP.CallerID2ndTone[6] = 0xB5;
- j->m_DAAShadowRegs.COP_REGS.COP.CallerID2ndTone[5] = 0xBA;
- j->m_DAAShadowRegs.COP_REGS.COP.CallerID2ndTone[4] = 0x07;
- j->m_DAAShadowRegs.COP_REGS.COP.CallerID2ndTone[3] = 0xDA;
- j->m_DAAShadowRegs.COP_REGS.COP.CallerID2ndTone[2] = 0x00;
- j->m_DAAShadowRegs.COP_REGS.COP.CallerID2ndTone[1] = 0x00;
- j->m_DAAShadowRegs.COP_REGS.COP.CallerID2ndTone[0] = 0x00;
-/* ;CR Registers */
- /* Config. Reg. 0 (filters) (cr0):FF */
- j->m_DAAShadowRegs.SOP_REGS.SOP.cr0.reg = 0xFF;
-/* Config. Reg. 1 (dialing) (cr1):05 */
- j->m_DAAShadowRegs.SOP_REGS.SOP.cr1.reg = 0x05;
-/* Config. Reg. 2 (caller ID) (cr2):04 */
- j->m_DAAShadowRegs.SOP_REGS.SOP.cr2.reg = 0x04;
-/* Config. Reg. 3 (testloops) (cr3):00 ; */
- j->m_DAAShadowRegs.SOP_REGS.SOP.cr3.reg = 0x00;
-/* Config. Reg. 4 (analog gain) (cr4):02 */
- j->m_DAAShadowRegs.SOP_REGS.SOP.cr4.reg = 0x02;
- /* Config. Reg. 5 (Version) (cr5):02 */
- /* Config. Reg. 6 (Reserved) (cr6):00 */
- /* Config. Reg. 7 (Reserved) (cr7):00 */
- /* ;xr Registers */
- /* Ext. Reg. 0 (Interrupt Reg.) (xr0):02 */
-
- j->m_DAAShadowRegs.XOP_xr0_W.reg = 0x02; /* SO_1 set to '1' because it is inverted. */
- /* Ext. Reg. 1 (Interrupt enable) (xr1):1C */
-
- j->m_DAAShadowRegs.XOP_REGS.XOP.xr1.reg = 0x1C; /* RING, Caller ID, VDD_OK */
- /* Ext. Reg. 2 (Cadence Time Out) (xr2):7D */
-
- j->m_DAAShadowRegs.XOP_REGS.XOP.xr2.reg = 0x7D;
-/* Ext. Reg. 3 (DC Char) (xr3):2B ; */
- j->m_DAAShadowRegs.XOP_REGS.XOP.xr3.reg = 0x2B;
-/* Ext. Reg. 4 (Cadence) (xr4):00 */
- j->m_DAAShadowRegs.XOP_REGS.XOP.xr4.reg = 0x00;
-/* Ext. Reg. 5 (Ring timer) (xr5):22 */
- j->m_DAAShadowRegs.XOP_REGS.XOP.xr5.reg = 0x22;
-/* Ext. Reg. 6 (Power State) (xr6):00 */
- j->m_DAAShadowRegs.XOP_xr6_W.reg = 0x00;
-/* Ext. Reg. 7 (Vdd) (xr7):40 */
- j->m_DAAShadowRegs.XOP_REGS.XOP.xr7.reg = 0x40; /* 0x40 ??? Should it be 0x00? */
-
- /* DTMF Tone 1 (0B): 11,B3,5A,2C ; 697 Hz */
- /* 12,33,5A,C3 ; 770 Hz */
- /* 13,3C,5B,32 ; 852 Hz */
- /* 1D,1B,5C,CC ; 941 Hz */
- j->m_DAAShadowRegs.COP_REGS.COP.Tone1Coeff[3] = 0x11;
- j->m_DAAShadowRegs.COP_REGS.COP.Tone1Coeff[2] = 0xB3;
- j->m_DAAShadowRegs.COP_REGS.COP.Tone1Coeff[1] = 0x5A;
- j->m_DAAShadowRegs.COP_REGS.COP.Tone1Coeff[0] = 0x2C;
-
- /* DTMF Tone 2 (0C): 32,32,52,B3 ; 1209 Hz */
- /* EC,1D,52,22 ; 1336 Hz */
- /* AA,AC,51,D2 ; 1477 Hz */
- /* 9B,3B,51,25 ; 1633 Hz */
- j->m_DAAShadowRegs.COP_REGS.COP.Tone2Coeff[3] = 0x32;
- j->m_DAAShadowRegs.COP_REGS.COP.Tone2Coeff[2] = 0x32;
- j->m_DAAShadowRegs.COP_REGS.COP.Tone2Coeff[1] = 0x52;
- j->m_DAAShadowRegs.COP_REGS.COP.Tone2Coeff[0] = 0xB3;
-}
-
-static void DAA_Coeff_Japan(IXJ *j)
-{
- int i;
-
- j->daa_country = DAA_JAPAN;
- /*----------------------------------------------- */
- /* CAO */
- for (i = 0; i < ALISDAA_CALLERID_SIZE; i++) {
- j->m_DAAShadowRegs.CAO_REGS.CAO.CallerID[i] = 0;
- }
-
-/* Bytes for IM-filter part 1 (04): 06,BD,E2,2D,BA,F9,A0,00 */
- j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_1[7] = 0x06;
- j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_1[6] = 0xBD;
- j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_1[5] = 0xE2;
- j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_1[4] = 0x2D;
- j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_1[3] = 0xBA;
- j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_1[2] = 0xF9;
- j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_1[1] = 0xA0;
- j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_1[0] = 0x00;
-/* Bytes for IM-filter part 2 (05): 6F,F7,00,0E,34,33,E0,08 */
- j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_2[7] = 0x6F;
- j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_2[6] = 0xF7;
- j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_2[5] = 0x00;
- j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_2[4] = 0x0E;
- j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_2[3] = 0x34;
- j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_2[2] = 0x33;
- j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_2[1] = 0xE0;
- j->m_DAAShadowRegs.COP_REGS.COP.IMFilterCoeff_2[0] = 0x08;
-/* Bytes for FRX-filter (08): 02,8F,68,77,9C,58,F0,08 */
- j->m_DAAShadowRegs.COP_REGS.COP.FRXFilterCoeff[7] = 0x02;
- j->m_DAAShadowRegs.COP_REGS.COP.FRXFilterCoeff[6] = 0x8F;
- j->m_DAAShadowRegs.COP_REGS.COP.FRXFilterCoeff[5] = 0x68;
- j->m_DAAShadowRegs.COP_REGS.COP.FRXFilterCoeff[4] = 0x77;
- j->m_DAAShadowRegs.COP_REGS.COP.FRXFilterCoeff[3] = 0x9C;
- j->m_DAAShadowRegs.COP_REGS.COP.FRXFilterCoeff[2] = 0x58;
- j->m_DAAShadowRegs.COP_REGS.COP.FRXFilterCoeff[1] = 0xF0;
- j->m_DAAShadowRegs.COP_REGS.COP.FRXFilterCoeff[0] = 0x08;
-/* Bytes for FRR-filter (07): 03,8F,38,73,87,EA,20,08 */
- j->m_DAAShadowRegs.COP_REGS.COP.FRRFilterCoeff[7] = 0x03;
- j->m_DAAShadowRegs.COP_REGS.COP.FRRFilterCoeff[6] = 0x8F;
- j->m_DAAShadowRegs.COP_REGS.COP.FRRFilterCoeff[5] = 0x38;
- j->m_DAAShadowRegs.COP_REGS.COP.FRRFilterCoeff[4] = 0x73;
- j->m_DAAShadowRegs.COP_REGS.COP.FRRFilterCoeff[3] = 0x87;
- j->m_DAAShadowRegs.COP_REGS.COP.FRRFilterCoeff[2] = 0xEA;
- j->m_DAAShadowRegs.COP_REGS.COP.FRRFilterCoeff[1] = 0x20;
- j->m_DAAShadowRegs.COP_REGS.COP.FRRFilterCoeff[0] = 0x08;
-/* Bytes for AX-filter (0A): 51,C5,DD,CA */
- j->m_DAAShadowRegs.COP_REGS.COP.AXFilterCoeff[3] = 0x51;
- j->m_DAAShadowRegs.COP_REGS.COP.AXFilterCoeff[2] = 0xC5;
- j->m_DAAShadowRegs.COP_REGS.COP.AXFilterCoeff[1] = 0xDD;
- j->m_DAAShadowRegs.COP_REGS.COP.AXFilterCoeff[0] = 0xCA;
-/* Bytes for AR-filter (09): 25,A7,10,D6 */
- j->m_DAAShadowRegs.COP_REGS.COP.ARFilterCoeff[3] = 0x25;
- j->m_DAAShadowRegs.COP_REGS.COP.ARFilterCoeff[2] = 0xA7;
- j->m_DAAShadowRegs.COP_REGS.COP.ARFilterCoeff[1] = 0x10;
- j->m_DAAShadowRegs.COP_REGS.COP.ARFilterCoeff[0] = 0xD6;
-/* Bytes for TH-filter part 1 (00): 00,42,48,81,AE,80,00,98 */
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_1[7] = 0x00;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_1[6] = 0x42;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_1[5] = 0x48;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_1[4] = 0x81;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_1[3] = 0xAE;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_1[2] = 0x80;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_1[1] = 0x00;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_1[0] = 0x98;
-/* Bytes for TH-filter part 2 (01): 02,AB,2A,20,99,5B,89,28 */
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_2[7] = 0x02;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_2[6] = 0xAB;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_2[5] = 0x2A;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_2[4] = 0x20;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_2[3] = 0x99;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_2[2] = 0x5B;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_2[1] = 0x89;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_2[0] = 0x28;
-/* Bytes for TH-filter part 3 (02): 00,88,DA,25,34,C5,4C,BA */
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_3[7] = 0x00;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_3[6] = 0x88;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_3[5] = 0xDA;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_3[4] = 0x25;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_3[3] = 0x34;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_3[2] = 0xC5;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_3[1] = 0x4C;
- j->m_DAAShadowRegs.COP_REGS.COP.THFilterCoeff_3[0] = 0xBA;
-/* ; idle */
- /* Bytes for Ringing part 1 (03):1B,3C,93,3A,22,12,A3,23 */
- j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_1[7] = 0x1B;
- j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_1[6] = 0x3C;
- j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_1[5] = 0x93;
- j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_1[4] = 0x3A;
- j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_1[3] = 0x22;
- j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_1[2] = 0x12;
- j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_1[1] = 0xA3;
- j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_1[0] = 0x23;
-/* Bytes for Ringing part 2 (06):12,A2,A6,BA,22,7A,0A,D5 */
- j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_2[7] = 0x12;
- j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_2[6] = 0xA2;
- j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_2[5] = 0xA6;
- j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_2[4] = 0xBA;
- j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_2[3] = 0x22;
- j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_2[2] = 0x7A;
- j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_2[1] = 0x0A;
- j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_2[0] = 0xD5;
-/* Levelmetering Ringing (0D):AA,35,0F,8E ; 25Hz 30V ????????? */
- j->m_DAAShadowRegs.COP_REGS.COP.LevelmeteringRinging[3] = 0xAA;
- j->m_DAAShadowRegs.COP_REGS.COP.LevelmeteringRinging[2] = 0x35;
- j->m_DAAShadowRegs.COP_REGS.COP.LevelmeteringRinging[1] = 0x0F;
- j->m_DAAShadowRegs.COP_REGS.COP.LevelmeteringRinging[0] = 0x8E;
-/* Caller ID 1st Tone (0E):CA,0E,CA,09,99,99,99,99 */
- j->m_DAAShadowRegs.COP_REGS.COP.CallerID1stTone[7] = 0xCA;
- j->m_DAAShadowRegs.COP_REGS.COP.CallerID1stTone[6] = 0x0E;
- j->m_DAAShadowRegs.COP_REGS.COP.CallerID1stTone[5] = 0xCA;
- j->m_DAAShadowRegs.COP_REGS.COP.CallerID1stTone[4] = 0x09;
- j->m_DAAShadowRegs.COP_REGS.COP.CallerID1stTone[3] = 0x99;
- j->m_DAAShadowRegs.COP_REGS.COP.CallerID1stTone[2] = 0x99;
- j->m_DAAShadowRegs.COP_REGS.COP.CallerID1stTone[1] = 0x99;
- j->m_DAAShadowRegs.COP_REGS.COP.CallerID1stTone[0] = 0x99;
-/* Caller ID 2nd Tone (0F):FD,B5,BA,07,DA,00,00,00 */
- j->m_DAAShadowRegs.COP_REGS.COP.CallerID2ndTone[7] = 0xFD;
- j->m_DAAShadowRegs.COP_REGS.COP.CallerID2ndTone[6] = 0xB5;
- j->m_DAAShadowRegs.COP_REGS.COP.CallerID2ndTone[5] = 0xBA;
- j->m_DAAShadowRegs.COP_REGS.COP.CallerID2ndTone[4] = 0x07;
- j->m_DAAShadowRegs.COP_REGS.COP.CallerID2ndTone[3] = 0xDA;
- j->m_DAAShadowRegs.COP_REGS.COP.CallerID2ndTone[2] = 0x00;
- j->m_DAAShadowRegs.COP_REGS.COP.CallerID2ndTone[1] = 0x00;
- j->m_DAAShadowRegs.COP_REGS.COP.CallerID2ndTone[0] = 0x00;
-/* ;CR Registers */
- /* Config. Reg. 0 (filters) (cr0):FF */
- j->m_DAAShadowRegs.SOP_REGS.SOP.cr0.reg = 0xFF;
-/* Config. Reg. 1 (dialing) (cr1):05 */
- j->m_DAAShadowRegs.SOP_REGS.SOP.cr1.reg = 0x05;
-/* Config. Reg. 2 (caller ID) (cr2):04 */
- j->m_DAAShadowRegs.SOP_REGS.SOP.cr2.reg = 0x04;
-/* Config. Reg. 3 (testloops) (cr3):00 ; */
- j->m_DAAShadowRegs.SOP_REGS.SOP.cr3.reg = 0x00;
-/* Config. Reg. 4 (analog gain) (cr4):02 */
- j->m_DAAShadowRegs.SOP_REGS.SOP.cr4.reg = 0x02;
- /* Config. Reg. 5 (Version) (cr5):02 */
- /* Config. Reg. 6 (Reserved) (cr6):00 */
- /* Config. Reg. 7 (Reserved) (cr7):00 */
- /* ;xr Registers */
- /* Ext. Reg. 0 (Interrupt Reg.) (xr0):02 */
-
- j->m_DAAShadowRegs.XOP_xr0_W.reg = 0x02; /* SO_1 set to '1' because it is inverted. */
- /* Ext. Reg. 1 (Interrupt enable) (xr1):1C */
-
- j->m_DAAShadowRegs.XOP_REGS.XOP.xr1.reg = 0x1C; /* RING, Caller ID, VDD_OK */
- /* Ext. Reg. 2 (Cadence Time Out) (xr2):7D */
-
- j->m_DAAShadowRegs.XOP_REGS.XOP.xr2.reg = 0x7D;
-/* Ext. Reg. 3 (DC Char) (xr3):22 ; */
- j->m_DAAShadowRegs.XOP_REGS.XOP.xr3.reg = 0x22;
-/* Ext. Reg. 4 (Cadence) (xr4):00 */
- j->m_DAAShadowRegs.XOP_REGS.XOP.xr4.reg = 0x00;
-/* Ext. Reg. 5 (Ring timer) (xr5):22 */
- j->m_DAAShadowRegs.XOP_REGS.XOP.xr5.reg = 0x22;
-/* Ext. Reg. 6 (Power State) (xr6):00 */
- j->m_DAAShadowRegs.XOP_xr6_W.reg = 0x00;
-/* Ext. Reg. 7 (Vdd) (xr7):40 */
- j->m_DAAShadowRegs.XOP_REGS.XOP.xr7.reg = 0x40; /* 0x40 ??? Should it be 0x00? */
- /* DTMF Tone 1 (0B): 11,B3,5A,2C ; 697 Hz */
- /* 12,33,5A,C3 ; 770 Hz */
- /* 13,3C,5B,32 ; 852 Hz */
- /* 1D,1B,5C,CC ; 941 Hz */
-
- j->m_DAAShadowRegs.COP_REGS.COP.Tone1Coeff[3] = 0x11;
- j->m_DAAShadowRegs.COP_REGS.COP.Tone1Coeff[2] = 0xB3;
- j->m_DAAShadowRegs.COP_REGS.COP.Tone1Coeff[1] = 0x5A;
- j->m_DAAShadowRegs.COP_REGS.COP.Tone1Coeff[0] = 0x2C;
-/* DTMF Tone 2 (0C): 32,32,52,B3 ; 1209 Hz */
- /* EC,1D,52,22 ; 1336 Hz */
- /* AA,AC,51,D2 ; 1477 Hz */
- /* 9B,3B,51,25 ; 1633 Hz */
- j->m_DAAShadowRegs.COP_REGS.COP.Tone2Coeff[3] = 0x32;
- j->m_DAAShadowRegs.COP_REGS.COP.Tone2Coeff[2] = 0x32;
- j->m_DAAShadowRegs.COP_REGS.COP.Tone2Coeff[1] = 0x52;
- j->m_DAAShadowRegs.COP_REGS.COP.Tone2Coeff[0] = 0xB3;
-}
-
-static s16 tone_table[][19] =
-{
- { /* f20_50[] 11 */
- 32538, /* A1 = 1.985962 */
- -32325, /* A2 = -0.986511 */
- -343, /* B2 = -0.010493 */
- 0, /* B1 = 0 */
- 343, /* B0 = 0.010493 */
- 32619, /* A1 = 1.990906 */
- -32520, /* A2 = -0.992462 */
- 19179, /* B2 = 0.585327 */
- -19178, /* B1 = -1.170593 */
- 19179, /* B0 = 0.585327 */
- 32723, /* A1 = 1.997314 */
- -32686, /* A2 = -0.997528 */
- 9973, /* B2 = 0.304352 */
- -9955, /* B1 = -0.607605 */
- 9973, /* B0 = 0.304352 */
- 7, /* Internal filter scaling */
- 159, /* Minimum in-band energy threshold */
- 21, /* 21/32 in-band to broad-band ratio */
- 0x0FF5 /* shift-mask 0x0FF (look at 16 half-frames) bit count = 5 */
- },
- { /* f133_200[] 12 */
- 32072, /* A1 = 1.95752 */
- -31896, /* A2 = -0.973419 */
- -435, /* B2 = -0.013294 */
- 0, /* B1 = 0 */
- 435, /* B0 = 0.013294 */
- 32188, /* A1 = 1.9646 */
- -32400, /* A2 = -0.98877 */
- 15139, /* B2 = 0.462036 */
- -14882, /* B1 = -0.908356 */
- 15139, /* B0 = 0.462036 */
- 32473, /* A1 = 1.981995 */
- -32524, /* A2 = -0.992584 */
- 23200, /* B2 = 0.708008 */
- -23113, /* B1 = -1.410706 */
- 23200, /* B0 = 0.708008 */
- 7, /* Internal filter scaling */
- 159, /* Minimum in-band energy threshold */
- 21, /* 21/32 in-band to broad-band ratio */
- 0x0FF5 /* shift-mask 0x0FF (look at 16 half-frames) bit count = 5 */
- },
- { /* f300 13 */
- 31769, /* A1 = -1.939026 */
- -32584, /* A2 = 0.994385 */
- -475, /* B2 = -0.014522 */
- 0, /* B1 = 0.000000 */
- 475, /* B0 = 0.014522 */
- 31789, /* A1 = -1.940247 */
- -32679, /* A2 = 0.997284 */
- 17280, /* B2 = 0.527344 */
- -16865, /* B1 = -1.029358 */
- 17280, /* B0 = 0.527344 */
- 31841, /* A1 = -1.943481 */
- -32681, /* A2 = 0.997345 */
- 543, /* B2 = 0.016579 */
- -525, /* B1 = -0.032097 */
- 543, /* B0 = 0.016579 */
- 5, /* Internal filter scaling */
- 159, /* Minimum in-band energy threshold */
- 21, /* 21/32 in-band to broad-band ratio */
- 0x0FF5 /* shift-mask 0x0FF (look at 16 half-frames) bit count = 5 */
- },
- { /* f300_420[] 14 */
- 30750, /* A1 = 1.876892 */
- -31212, /* A2 = -0.952515 */
- -804, /* B2 = -0.024541 */
- 0, /* B1 = 0 */
- 804, /* B0 = 0.024541 */
- 30686, /* A1 = 1.872925 */
- -32145, /* A2 = -0.980988 */
- 14747, /* B2 = 0.450043 */
- -13703, /* B1 = -0.836395 */
- 14747, /* B0 = 0.450043 */
- 31651, /* A1 = 1.931824 */
- -32321, /* A2 = -0.986389 */
- 24425, /* B2 = 0.745422 */
- -23914, /* B1 = -1.459595 */
- 24427, /* B0 = 0.745483 */
- 7, /* Internal filter scaling */
- 159, /* Minimum in-band energy threshold */
- 21, /* 21/32 in-band to broad-band ratio */
- 0x0FF5 /* shift-mask 0x0FF (look at 16 half-frames) bit count = 5 */
- },
- { /* f330 15 */
- 31613, /* A1 = -1.929565 */
- -32646, /* A2 = 0.996277 */
- -185, /* B2 = -0.005657 */
- 0, /* B1 = 0.000000 */
- 185, /* B0 = 0.005657 */
- 31620, /* A1 = -1.929932 */
- -32713, /* A2 = 0.998352 */
- 19253, /* B2 = 0.587585 */
- -18566, /* B1 = -1.133179 */
- 19253, /* B0 = 0.587585 */
- 31674, /* A1 = -1.933228 */
- -32715, /* A2 = 0.998413 */
- 2575, /* B2 = 0.078590 */
- -2495, /* B1 = -0.152283 */
- 2575, /* B0 = 0.078590 */
- 5, /* Internal filter scaling */
- 159, /* Minimum in-band energy threshold */
- 21, /* 21/32 in-band to broad-band ratio */
- 0x0FF5 /* shift-mask 0x0FF (look at 16 half-frames) bit count = 5 */
- },
- { /* f300_425[] 16 */
- 30741, /* A1 = 1.876282 */
- -31475, /* A2 = -0.960541 */
- -703, /* B2 = -0.021484 */
- 0, /* B1 = 0 */
- 703, /* B0 = 0.021484 */
- 30688, /* A1 = 1.873047 */
- -32248, /* A2 = -0.984161 */
- 14542, /* B2 = 0.443787 */
- -13523, /* B1 = -0.825439 */
- 14542, /* B0 = 0.443817 */
- 31494, /* A1 = 1.922302 */
- -32366, /* A2 = -0.987762 */
- 21577, /* B2 = 0.658508 */
- -21013, /* B1 = -1.282532 */
- 21577, /* B0 = 0.658508 */
- 7, /* Internal filter scaling */
- 159, /* Minimum in-band energy threshold */
- 21, /* 21/32 in-band to broad-band ratio */
- 0x0FF5 /* shift-mask 0x0FF (look at 16 half-frames) bit count = 5 */
- },
- { /* f330_440[] 17 */
- 30627, /* A1 = 1.869324 */
- -31338, /* A2 = -0.95636 */
- -843, /* B2 = -0.025749 */
- 0, /* B1 = 0 */
- 843, /* B0 = 0.025749 */
- 30550, /* A1 = 1.864685 */
- -32221, /* A2 = -0.983337 */
- 13594, /* B2 = 0.414886 */
- -12589, /* B1 = -0.768402 */
- 13594, /* B0 = 0.414886 */
- 31488, /* A1 = 1.921936 */
- -32358, /* A2 = -0.987518 */
- 24684, /* B2 = 0.753296 */
- -24029, /* B1 = -1.466614 */
- 24684, /* B0 = 0.753296 */
- 7, /* Internal filter scaling */
- 159, /* Minimum in-band energy threshold */
- 21, /* 21/32 in-band to broad-band ratio */
- 0x0FF5 /* shift-mask 0x0FF (look at 16 half-frames) bit count = 5 */
- },
- { /* f340 18 */
- 31546, /* A1 = -1.925476 */
- -32646, /* A2 = 0.996277 */
- -445, /* B2 = -0.013588 */
- 0, /* B1 = 0.000000 */
- 445, /* B0 = 0.013588 */
- 31551, /* A1 = -1.925781 */
- -32713, /* A2 = 0.998352 */
- 23884, /* B2 = 0.728882 */
- -22979, /* B1 = -1.402527 */
- 23884, /* B0 = 0.728882 */
- 31606, /* A1 = -1.929138 */
- -32715, /* A2 = 0.998413 */
- 863, /* B2 = 0.026367 */
- -835, /* B1 = -0.050985 */
- 863, /* B0 = 0.026367 */
- 5, /* Internal filter scaling */
- 159, /* Minimum in-band energy threshold */
- 21, /* 21/32 in-band to broad-band ratio */
- 0x0FF5 /* shift-mask 0x0FF (look at 16 half-frames) bit count = 5 */
- },
- { /* f350_400[] 19 */
- 31006, /* A1 = 1.892517 */
- -32029, /* A2 = -0.977448 */
- -461, /* B2 = -0.014096 */
- 0, /* B1 = 0 */
- 461, /* B0 = 0.014096 */
- 30999, /* A1 = 1.892029 */
- -32487, /* A2 = -0.991455 */
- 11325, /* B2 = 0.345612 */
- -10682, /* B1 = -0.651978 */
- 11325, /* B0 = 0.345612 */
- 31441, /* A1 = 1.919067 */
- -32526, /* A2 = -0.992615 */
- 24324, /* B2 = 0.74231 */
- -23535, /* B1 = -1.436523 */
- 24324, /* B0 = 0.74231 */
- 7, /* Internal filter scaling */
- 159, /* Minimum in-band energy threshold */
- 21, /* 21/32 in-band to broad-band ratio */
- 0x0FF5 /* shift-mask 0x0FF (look at 16 half-frames) bit count = 5 */
- },
- { /* f350_440[] */
- 30634, /* A1 = 1.869751 */
- -31533, /* A2 = -0.962341 */
- -680, /* B2 = -0.020782 */
- 0, /* B1 = 0 */
- 680, /* B0 = 0.020782 */
- 30571, /* A1 = 1.865906 */
- -32277, /* A2 = -0.985016 */
- 12894, /* B2 = 0.393524 */
- -11945, /* B1 = -0.729065 */
- 12894, /* B0 = 0.393524 */
- 31367, /* A1 = 1.91449 */
- -32379, /* A2 = -0.988129 */
- 23820, /* B2 = 0.726929 */
- -23104, /* B1 = -1.410217 */
- 23820, /* B0 = 0.726929 */
- 7, /* Internal filter scaling */
- 159, /* Minimum in-band energy threshold */
- 21, /* 21/32 in-band to broad-band ratio */
- 0x0FF5 /* shift-mask 0x0FF (look at 16 half-frames) bit count = 5 */
- },
- { /* f350_450[] */
- 30552, /* A1 = 1.864807 */
- -31434, /* A2 = -0.95929 */
- -690, /* B2 = -0.021066 */
- 0, /* B1 = 0 */
- 690, /* B0 = 0.021066 */
- 30472, /* A1 = 1.859924 */
- -32248, /* A2 = -0.984161 */
- 13385, /* B2 = 0.408478 */
- -12357, /* B1 = -0.754242 */
- 13385, /* B0 = 0.408478 */
- 31358, /* A1 = 1.914001 */
- -32366, /* A2 = -0.987732 */
- 26488, /* B2 = 0.80835 */
- -25692, /* B1 = -1.568176 */
- 26490, /* B0 = 0.808411 */
- 7, /* Internal filter scaling */
- 159, /* Minimum in-band energy threshold */
- 21, /* 21/32 in-band to broad-band ratio */
- 0x0FF5 /* shift-mask 0x0FF (look at 16 half-frames) bit count = 5 */
- },
- { /* f360 */
- 31397, /* A1 = -1.916321 */
- -32623, /* A2 = 0.995605 */
- -117, /* B2 = -0.003598 */
- 0, /* B1 = 0.000000 */
- 117, /* B0 = 0.003598 */
- 31403, /* A1 = -1.916687 */
- -32700, /* A2 = 0.997925 */
- 3388, /* B2 = 0.103401 */
- -3240, /* B1 = -0.197784 */
- 3388, /* B0 = 0.103401 */
- 31463, /* A1 = -1.920410 */
- -32702, /* A2 = 0.997986 */
- 13346, /* B2 = 0.407288 */
- -12863, /* B1 = -0.785126 */
- 13346, /* B0 = 0.407288 */
- 5, /* Internal filter scaling */
- 159, /* Minimum in-band energy threshold */
- 21, /* 21/32 in-band to broad-band ratio */
- 0x0FF5 /* shift-mask 0x0FF (look at 16 half-frames) bit count = 5 */
- },
- { /* f380_420[] */
- 30831, /* A1 = 1.881775 */
- -32064, /* A2 = -0.978546 */
- -367, /* B2 = -0.01122 */
- 0, /* B1 = 0 */
- 367, /* B0 = 0.01122 */
- 30813, /* A1 = 1.880737 */
- -32456, /* A2 = -0.990509 */
- 11068, /* B2 = 0.337769 */
- -10338, /* B1 = -0.631042 */
- 11068, /* B0 = 0.337769 */
- 31214, /* A1 = 1.905212 */
- -32491, /* A2 = -0.991577 */
- 16374, /* B2 = 0.499695 */
- -15781, /* B1 = -0.963196 */
- 16374, /* B0 = 0.499695 */
- 7, /* Internal filter scaling */
- 159, /* Minimum in-band energy threshold */
- 21, /* 21/32 in-band to broad-band ratio */
- 0x0FF5 /* shift-mask 0x0FF (look at 16 half-frames) bit count = 5 */
- },
- { /* f392 */
- 31152, /* A1 = -1.901428 */
- -32613, /* A2 = 0.995300 */
- -314, /* B2 = -0.009605 */
- 0, /* B1 = 0.000000 */
- 314, /* B0 = 0.009605 */
- 31156, /* A1 = -1.901672 */
- -32694, /* A2 = 0.997742 */
- 28847, /* B2 = 0.880371 */
- -2734, /* B1 = -0.166901 */
- 28847, /* B0 = 0.880371 */
- 31225, /* A1 = -1.905823 */
- -32696, /* A2 = 0.997803 */
- 462, /* B2 = 0.014108 */
- -442, /* B1 = -0.027019 */
- 462, /* B0 = 0.014108 */
- 5, /* Internal filter scaling */
- 159, /* Minimum in-band energy threshold */
- 21, /* 21/32 in-band to broad-band ratio */
- 0x0FF5 /* shift-mask 0x0FF (look at 16 half-frames) bit count = 5 */
- },
- { /* f400_425[] */
- 30836, /* A1 = 1.882141 */
- -32296, /* A2 = -0.985596 */
- -324, /* B2 = -0.009903 */
- 0, /* B1 = 0 */
- 324, /* B0 = 0.009903 */
- 30825, /* A1 = 1.881409 */
- -32570, /* A2 = -0.993958 */
- 16847, /* B2 = 0.51416 */
- -15792, /* B1 = -0.963898 */
- 16847, /* B0 = 0.51416 */
- 31106, /* A1 = 1.89856 */
- -32584, /* A2 = -0.994415 */
- 9579, /* B2 = 0.292328 */
- -9164, /* B1 = -0.559357 */
- 9579, /* B0 = 0.292328 */
- 7, /* Internal filter scaling */
- 159, /* Minimum in-band energy threshold */
- 21, /* 21/32 in-band to broad-band ratio */
- 0x0FF5 /* shift-mask 0x0FF (look at 16 half-frames) bit count = 5 */
- },
- { /* f400_440[] */
- 30702, /* A1 = 1.873962 */
- -32134, /* A2 = -0.980682 */
- -517, /* B2 = -0.015793 */
- 0, /* B1 = 0 */
- 517, /* B0 = 0.015793 */
- 30676, /* A1 = 1.872375 */
- -32520, /* A2 = -0.992462 */
- 8144, /* B2 = 0.24855 */
- -7596, /* B1 = -0.463684 */
- 8144, /* B0 = 0.24855 */
- 31084, /* A1 = 1.897217 */
- -32547, /* A2 = -0.993256 */
- 22713, /* B2 = 0.693176 */
- -21734, /* B1 = -1.326599 */
- 22713, /* B0 = 0.693176 */
- 7, /* Internal filter scaling */
- 159, /* Minimum in-band energy threshold */
- 21, /* 21/32 in-band to broad-band ratio */
- 0x0FF5 /* shift-mask 0x0FF (look at 16 half-frames) bit count = 5 */
- },
- { /* f400_450[] */
- 30613, /* A1 = 1.86853 */
- -32031, /* A2 = -0.977509 */
- -618, /* B2 = -0.018866 */
- 0, /* B1 = 0 */
- 618, /* B0 = 0.018866 */
- 30577, /* A1 = 1.866272 */
- -32491, /* A2 = -0.991577 */
- 9612, /* B2 = 0.293335 */
- -8935, /* B1 = -0.54541 */
- 9612, /* B0 = 0.293335 */
- 31071, /* A1 = 1.896484 */
- -32524, /* A2 = -0.992584 */
- 21596, /* B2 = 0.659058 */
- -20667, /* B1 = -1.261414 */
- 21596, /* B0 = 0.659058 */
- 7, /* Internal filter scaling */
- 159, /* Minimum in-band energy threshold */
- 21, /* 21/32 in-band to broad-band ratio */
- 0x0FF5 /* shift-mask 0x0FF (look at 16 half-frames) bit count = 5 */
- },
- { /* f420 */
- 30914, /* A1 = -1.886841 */
- -32584, /* A2 = 0.994385 */
- -426, /* B2 = -0.013020 */
- 0, /* B1 = 0.000000 */
- 426, /* B0 = 0.013020 */
- 30914, /* A1 = -1.886841 */
- -32679, /* A2 = 0.997314 */
- 17520, /* B2 = 0.534668 */
- -16471, /* B1 = -1.005310 */
- 17520, /* B0 = 0.534668 */
- 31004, /* A1 = -1.892334 */
- -32683, /* A2 = 0.997406 */
- 819, /* B2 = 0.025023 */
- -780, /* B1 = -0.047619 */
- 819, /* B0 = 0.025023 */
- 5, /* Internal filter scaling */
- 159, /* Minimum in-band energy threshold */
- 21, /* 21/32 in-band to broad-band ratio */
- 0x0FF5 /* shift-mask 0x0FF (look at 16 half-frames) bit count = 5 */
- },
-#if 0
- { /* f425 */
- 30881, /* A1 = -1.884827 */
- -32603, /* A2 = 0.994965 */
- -496, /* B2 = -0.015144 */
- 0, /* B1 = 0.000000 */
- 496, /* B0 = 0.015144 */
- 30880, /* A1 = -1.884766 */
- -32692, /* A2 = 0.997711 */
- 24767, /* B2 = 0.755859 */
- -23290, /* B1 = -1.421509 */
- 24767, /* B0 = 0.755859 */
- 30967, /* A1 = -1.890076 */
- -32694, /* A2 = 0.997772 */
- 728, /* B2 = 0.022232 */
- -691, /* B1 = -0.042194 */
- 728, /* B0 = 0.022232 */
- 5, /* Internal filter scaling */
- 159, /* Minimum in-band energy threshold */
- 21, /* 21/32 in-band to broad-band ratio */
- 0x0FF5 /* shift-mask 0x0FF (look at 16 half-frames) bit count = 5 */
- },
-#else
- {
- 30850,
- -32534,
- -504,
- 0,
- 504,
- 30831,
- -32669,
- 24303,
- -22080,
- 24303,
- 30994,
- -32673,
- 1905,
- -1811,
- 1905,
- 5,
- 129,
- 17,
- 0xff5
- },
-#endif
- { /* f425_450[] */
- 30646, /* A1 = 1.870544 */
- -32327, /* A2 = -0.986572 */
- -287, /* B2 = -0.008769 */
- 0, /* B1 = 0 */
- 287, /* B0 = 0.008769 */
- 30627, /* A1 = 1.869324 */
- -32607, /* A2 = -0.995087 */
- 13269, /* B2 = 0.404968 */
- -12376, /* B1 = -0.755432 */
- 13269, /* B0 = 0.404968 */
- 30924, /* A1 = 1.887512 */
- -32619, /* A2 = -0.995453 */
- 19950, /* B2 = 0.608826 */
- -18940, /* B1 = -1.156006 */
- 19950, /* B0 = 0.608826 */
- 7, /* Internal filter scaling */
- 159, /* Minimum in-band energy threshold */
- 21, /* 21/32 in-band to broad-band ratio */
- 0x0FF5 /* shift-mask 0x0FF (look at 16 half-frames) bit count = 5 */
- },
- { /* f425_475[] */
- 30396, /* A1 = 1.855225 */
- -32014, /* A2 = -0.97699 */
- -395, /* B2 = -0.012055 */
- 0, /* B1 = 0 */
- 395, /* B0 = 0.012055 */
- 30343, /* A1 = 1.85199 */
- -32482, /* A2 = -0.991302 */
- 17823, /* B2 = 0.543945 */
- -16431, /* B1 = -1.002869 */
- 17823, /* B0 = 0.543945 */
- 30872, /* A1 = 1.884338 */
- -32516, /* A2 = -0.99231 */
- 18124, /* B2 = 0.553101 */
- -17246, /* B1 = -1.052673 */
- 18124, /* B0 = 0.553101 */
- 7, /* Internal filter scaling */
- 159, /* Minimum in-band energy threshold */
- 21, /* 21/32 in-band to broad-band ratio */
- 0x0FF5 /* shift-mask 0x0FF (look at 16 half-frames) bit count = 5 */
- },
- { /* f435 */
- 30796, /* A1 = -1.879639 */
- -32603, /* A2 = 0.994965 */
- -254, /* B2 = -0.007762 */
- 0, /* B1 = 0.000000 */
- 254, /* B0 = 0.007762 */
- 30793, /* A1 = -1.879456 */
- -32692, /* A2 = 0.997711 */
- 18934, /* B2 = 0.577820 */
- -17751, /* B1 = -1.083496 */
- 18934, /* B0 = 0.577820 */
- 30882, /* A1 = -1.884888 */
- -32694, /* A2 = 0.997772 */
- 1858, /* B2 = 0.056713 */
- -1758, /* B1 = -0.107357 */
- 1858, /* B0 = 0.056713 */
- 5, /* Internal filter scaling */
- 159, /* Minimum in-band energy threshold */
- 21, /* 21/32 in-band to broad-band ratio */
- 0x0FF5 /* shift-mask 0x0FF (look at 16 half-frames) bit count = 5 */
- },
- { /* f440_450[] */
- 30641, /* A1 = 1.870239 */
- -32458, /* A2 = -0.99057 */
- -155, /* B2 = -0.004735 */
- 0, /* B1 = 0 */
- 155, /* B0 = 0.004735 */
- 30631, /* A1 = 1.869568 */
- -32630, /* A2 = -0.995789 */
- 11453, /* B2 = 0.349548 */
- -10666, /* B1 = -0.651001 */
- 11453, /* B0 = 0.349548 */
- 30810, /* A1 = 1.880554 */
- -32634, /* A2 = -0.995941 */
- 12237, /* B2 = 0.373474 */
- -11588, /* B1 = -0.707336 */
- 12237, /* B0 = 0.373474 */
- 7, /* Internal filter scaling */
- 159, /* Minimum in-band energy threshold */
- 21, /* 21/32 in-band to broad-band ratio */
- 0x0FF5 /* shift-mask 0x0FF (look at 16 half-frames) bit count = 5 */
- },
- { /* f440_480[] */
- 30367, /* A1 = 1.853455 */
- -32147, /* A2 = -0.981079 */
- -495, /* B2 = -0.015113 */
- 0, /* B1 = 0 */
- 495, /* B0 = 0.015113 */
- 30322, /* A1 = 1.850769 */
- -32543, /* A2 = -0.993134 */
- 10031, /* B2 = 0.306152 */
- -9252, /* B1 = -0.564728 */
- 10031, /* B0 = 0.306152 */
- 30770, /* A1 = 1.878052 */
- -32563, /* A2 = -0.993774 */
- 22674, /* B2 = 0.691956 */
- -21465, /* B1 = -1.31012 */
- 22674, /* B0 = 0.691956 */
- 7, /* Internal filter scaling */
- 159, /* Minimum in-band energy threshold */
- 21, /* 21/32 in-band to broad-band ratio */
- 0x0FF5 /* shift-mask 0x0FF (look at 16 half-frames) bit count = 5 */
- },
- { /* f445 */
- 30709, /* A1 = -1.874329 */
- -32603, /* A2 = 0.994965 */
- -83, /* B2 = -0.002545 */
- 0, /* B1 = 0.000000 */
- 83, /* B0 = 0.002545 */
- 30704, /* A1 = -1.874084 */
- -32692, /* A2 = 0.997711 */
- 10641, /* B2 = 0.324738 */
- -9947, /* B1 = -0.607147 */
- 10641, /* B0 = 0.324738 */
- 30796, /* A1 = -1.879639 */
- -32694, /* A2 = 0.997772 */
- 10079, /* B2 = 0.307587 */
- 9513, /* B1 = 0.580688 */
- 10079, /* B0 = 0.307587 */
- 5, /* Internal filter scaling */
- 159, /* Minimum in-band energy threshold */
- 21, /* 21/32 in-band to broad-band ratio */
- 0x0FF5 /* shift-mask 0x0FF (look at 16 half-frames) bit count = 5 */
- },
- { /* f450 */
- 30664, /* A1 = -1.871643 */
- -32603, /* A2 = 0.994965 */
- -164, /* B2 = -0.005029 */
- 0, /* B1 = 0.000000 */
- 164, /* B0 = 0.005029 */
- 30661, /* A1 = -1.871399 */
- -32692, /* A2 = 0.997711 */
- 15294, /* B2 = 0.466736 */
- -14275, /* B1 = -0.871307 */
- 15294, /* B0 = 0.466736 */
- 30751, /* A1 = -1.876953 */
- -32694, /* A2 = 0.997772 */
- 3548, /* B2 = 0.108284 */
- -3344, /* B1 = -0.204155 */
- 3548, /* B0 = 0.108284 */
- 5, /* Internal filter scaling */
- 159, /* Minimum in-band energy threshold */
- 21, /* 21/32 in-band to broad-band ratio */
- 0x0FF5 /* shift-mask 0x0FF (look at 16 half-frames) bit count = 5 */
- },
- { /* f452 */
- 30653, /* A1 = -1.870911 */
- -32615, /* A2 = 0.995361 */
- -209, /* B2 = -0.006382 */
- 0, /* B1 = 0.000000 */
- 209, /* B0 = 0.006382 */
- 30647, /* A1 = -1.870605 */
- -32702, /* A2 = 0.997986 */
- 18971, /* B2 = 0.578979 */
- -17716, /* B1 = -1.081299 */
- 18971, /* B0 = 0.578979 */
- 30738, /* A1 = -1.876099 */
- -32702, /* A2 = 0.998016 */
- 2967, /* B2 = 0.090561 */
- -2793, /* B1 = -0.170502 */
- 2967, /* B0 = 0.090561 */
- 5, /* Internal filter scaling */
- 159, /* Minimum in-band energy threshold */
- 21, /* 21/32 in-band to broad-band ratio */
- 0x0FF5 /* shift-mask 0x0FF (look at 16 half-frames) bit count = 5 */
- },
- { /* f475 */
- 30437, /* A1 = -1.857727 */
- -32603, /* A2 = 0.994965 */
- -264, /* B2 = -0.008062 */
- 0, /* B1 = 0.000000 */
- 264, /* B0 = 0.008062 */
- 30430, /* A1 = -1.857300 */
- -32692, /* A2 = 0.997711 */
- 21681, /* B2 = 0.661682 */
- -20082, /* B1 = -1.225708 */
- 21681, /* B0 = 0.661682 */
- 30526, /* A1 = -1.863220 */
- -32694, /* A2 = 0.997742 */
- 1559, /* B2 = 0.047600 */
- -1459, /* B1 = -0.089096 */
- 1559, /* B0 = 0.047600 */
- 5, /* Internal filter scaling */
- 159, /* Minimum in-band energy threshold */
- 21, /* 21/32 in-band to broad-band ratio */
- 0x0FF5 /* shift-mask 0x0FF (look at 16 half-frames) bit count = 5 */
- },
- { /* f480_620[] */
- 28975, /* A1 = 1.768494 */
- -30955, /* A2 = -0.944672 */
- -1026, /* B2 = -0.03133 */
- 0, /* B1 = 0 */
- 1026, /* B0 = 0.03133 */
- 28613, /* A1 = 1.746399 */
- -32089, /* A2 = -0.979309 */
- 14214, /* B2 = 0.433807 */
- -12202, /* B1 = -0.744812 */
- 14214, /* B0 = 0.433807 */
- 30243, /* A1 = 1.845947 */
- -32238, /* A2 = -0.983856 */
- 24825, /* B2 = 0.757629 */
- -23402, /* B1 = -1.428345 */
- 24825, /* B0 = 0.757629 */
- 7, /* Internal filter scaling */
- 159, /* Minimum in-band energy threshold */
- 21, /* 21/32 in-band to broad-band ratio */
- 0x0FF5 /* shift-mask 0x0FF (look at 16 half-frames) bit count = 5 */
- },
- { /* f494 */
- 30257, /* A1 = -1.846741 */
- -32605, /* A2 = 0.995056 */
- -249, /* B2 = -0.007625 */
- 0, /* B1 = 0.000000 */
- 249, /* B0 = 0.007625 */
- 30247, /* A1 = -1.846191 */
- -32694, /* A2 = 0.997772 */
- 18088, /* B2 = 0.552002 */
- -16652, /* B1 = -1.016418 */
- 18088, /* B0 = 0.552002 */
- 30348, /* A1 = -1.852295 */
- -32696, /* A2 = 0.997803 */
- 2099, /* B2 = 0.064064 */
- -1953, /* B1 = -0.119202 */
- 2099, /* B0 = 0.064064 */
- 5, /* Internal filter scaling */
- 159, /* Minimum in-band energy threshold */
- 21, /* 21/32 in-band to broad-band ratio */
- 0x0FF5 /* shift-mask 0x0FF (look at 16 half-frames) bit count = 5 */
- },
- { /* f500 */
- 30202, /* A1 = -1.843431 */
- -32624, /* A2 = 0.995622 */
- -413, /* B2 = -0.012622 */
- 0, /* B1 = 0.000000 */
- 413, /* B0 = 0.012622 */
- 30191, /* A1 = -1.842721 */
- -32714, /* A2 = 0.998364 */
- 25954, /* B2 = 0.792057 */
- -23890, /* B1 = -1.458131 */
- 25954, /* B0 = 0.792057 */
- 30296, /* A1 = -1.849172 */
- -32715, /* A2 = 0.998397 */
- 2007, /* B2 = 0.061264 */
- -1860, /* B1 = -0.113568 */
- 2007, /* B0 = 0.061264 */
- 5, /* Internal filter scaling */
- 159, /* Minimum in-band energy threshold */
- 21, /* 21/32 in-band to broad-band ratio */
- 0x0FF5 /* shift-mask 0x0FF (look at 16 half-frames) bit count = 5 */
- },
- { /* f520 */
- 30001, /* A1 = -1.831116 */
- -32613, /* A2 = 0.995270 */
- -155, /* B2 = -0.004750 */
- 0, /* B1 = 0.000000 */
- 155, /* B0 = 0.004750 */
- 29985, /* A1 = -1.830200 */
- -32710, /* A2 = 0.998260 */
- 6584, /* B2 = 0.200928 */
- -6018, /* B1 = -0.367355 */
- 6584, /* B0 = 0.200928 */
- 30105, /* A1 = -1.837524 */
- -32712, /* A2 = 0.998291 */
- 23812, /* B2 = 0.726685 */
- -21936, /* B1 = -1.338928 */
- 23812, /* B0 = 0.726685 */
- 5, /* Internal filter scaling */
- 159, /* Minimum in-band energy threshold */
- 21, /* 21/32 in-band to broad-band ratio */
- 0x0FF5 /* shift-mask 0x0FF (look at 16 half-frames) bit count = 5 */
- },
- { /* f523 */
- 29964, /* A1 = -1.828918 */
- -32601, /* A2 = 0.994904 */
- -101, /* B2 = -0.003110 */
- 0, /* B1 = 0.000000 */
- 101, /* B0 = 0.003110 */
- 29949, /* A1 = -1.827942 */
- -32700, /* A2 = 0.997925 */
- 11041, /* B2 = 0.336975 */
- -10075, /* B1 = -0.614960 */
- 11041, /* B0 = 0.336975 */
- 30070, /* A1 = -1.835388 */
- -32702, /* A2 = 0.997986 */
- 16762, /* B2 = 0.511536 */
- -15437, /* B1 = -0.942230 */
- 16762, /* B0 = 0.511536 */
- 5, /* Internal filter scaling */
- 159, /* Minimum in-band energy threshold */
- 21, /* 21/32 in-band to broad-band ratio */
- 0x0FF5 /* shift-mask 0x0FF (look at 16 half-frames) bit count = 5 */
- },
- { /* f525 */
- 29936, /* A1 = -1.827209 */
- -32584, /* A2 = 0.994415 */
- -91, /* B2 = -0.002806 */
- 0, /* B1 = 0.000000 */
- 91, /* B0 = 0.002806 */
- 29921, /* A1 = -1.826233 */
- -32688, /* A2 = 0.997559 */
- 11449, /* B2 = 0.349396 */
- -10426, /* B1 = -0.636383 */
- 11449, /* B0 = 0.349396 */
- 30045, /* A1 = -1.833862 */
- -32688, /* A2 = 0.997589 */
- 13055, /* B2 = 0.398407 */
- -12028, /* B1 = -0.734161 */
- 13055, /* B0 = 0.398407 */
- 5, /* Internal filter scaling */
- 159, /* Minimum in-band energy threshold */
- 21, /* 21/32 in-band to broad-band ratio */
- 0x0FF5 /* shift-mask 0x0FF (look at 16 half-frames) bit count = 5 */
- },
- { /* f540_660[] */
- 28499, /* A1 = 1.739441 */
- -31129, /* A2 = -0.949982 */
- -849, /* B2 = -0.025922 */
- 0, /* B1 = 0 */
- 849, /* B0 = 0.025922 */
- 28128, /* A1 = 1.716797 */
- -32130, /* A2 = -0.98056 */
- 14556, /* B2 = 0.444214 */
- -12251, /* B1 = -0.747772 */
- 14556, /* B0 = 0.444244 */
- 29667, /* A1 = 1.81073 */
- -32244, /* A2 = -0.984039 */
- 23038, /* B2 = 0.703064 */
- -21358, /* B1 = -1.303589 */
- 23040, /* B0 = 0.703125 */
- 7, /* Internal filter scaling */
- 159, /* Minimum in-band energy threshold */
- 21, /* 21/32 in-band to broad-band ratio */
- 0x0FF5 /* shift-mask 0x0FF (look at 16 half-frames) bit count = 5 */
- },
- { /* f587 */
- 29271, /* A1 = -1.786560 */
- -32599, /* A2 = 0.994873 */
- -490, /* B2 = -0.014957 */
- 0, /* B1 = 0.000000 */
- 490, /* B0 = 0.014957 */
- 29246, /* A1 = -1.785095 */
- -32700, /* A2 = 0.997925 */
- 28961, /* B2 = 0.883850 */
- -25796, /* B1 = -1.574463 */
- 28961, /* B0 = 0.883850 */
- 29383, /* A1 = -1.793396 */
- -32700, /* A2 = 0.997955 */
- 1299, /* B2 = 0.039650 */
- -1169, /* B1 = -0.071396 */
- 1299, /* B0 = 0.039650 */
- 5, /* Internal filter scaling */
- 159, /* Minimum in-band energy threshold */
- 21, /* 21/32 in-band to broad-band ratio */
- 0x0FF5 /* shift-mask 0x0FF (look at 16 half-frames) bit count = 5 */
- },
- { /* f590 */
- 29230, /* A1 = -1.784058 */
- -32584, /* A2 = 0.994415 */
- -418, /* B2 = -0.012757 */
- 0, /* B1 = 0.000000 */
- 418, /* B0 = 0.012757 */
- 29206, /* A1 = -1.782593 */
- -32688, /* A2 = 0.997559 */
- 36556, /* B2 = 1.115601 */
- -32478, /* B1 = -1.982300 */
- 36556, /* B0 = 1.115601 */
- 29345, /* A1 = -1.791077 */
- -32688, /* A2 = 0.997589 */
- 897, /* B2 = 0.027397 */
- -808, /* B1 = -0.049334 */
- 897, /* B0 = 0.027397 */
- 5, /* Internal filter scaling */
- 159, /* Minimum in-band energy threshold */
- 21, /* 21/32 in-band to broad-band ratio */
- 0x0FF5 /* shift-mask 0x0FF (look at 16 half-frames) bit count = 5 */
- },
- { /* f600 */
- 29116, /* A1 = -1.777100 */
- -32603, /* A2 = 0.994965 */
- -165, /* B2 = -0.005039 */
- 0, /* B1 = 0.000000 */
- 165, /* B0 = 0.005039 */
- 29089, /* A1 = -1.775452 */
- -32708, /* A2 = 0.998199 */
- 6963, /* B2 = 0.212494 */
- -6172, /* B1 = -0.376770 */
- 6963, /* B0 = 0.212494 */
- 29237, /* A1 = -1.784485 */
- -32710, /* A2 = 0.998230 */
- 24197, /* B2 = 0.738464 */
- -21657, /* B1 = -1.321899 */
- 24197, /* B0 = 0.738464 */
- 5, /* Internal filter scaling */
- 159, /* Minimum in-band energy threshold */
- 21, /* 21/32 in-band to broad-band ratio */
- 0x0FF5 /* shift-mask 0x0FF (look at 16 half-frames) bit count = 5 */
- },
- { /* f660 */
- 28376, /* A1 = -1.731934 */
- -32567, /* A2 = 0.993896 */
- -363, /* B2 = -0.011102 */
- 0, /* B1 = 0.000000 */
- 363, /* B0 = 0.011102 */
- 28337, /* A1 = -1.729614 */
- -32683, /* A2 = 0.997434 */
- 21766, /* B2 = 0.664246 */
- -18761, /* B1 = -1.145081 */
- 21766, /* B0 = 0.664246 */
- 28513, /* A1 = -1.740356 */
- -32686, /* A2 = 0.997498 */
- 2509, /* B2 = 0.076584 */
- -2196, /* B1 = -0.134041 */
- 2509, /* B0 = 0.076584 */
- 5, /* Internal filter scaling */
- 159, /* Minimum in-band energy threshold */
- 21, /* 21/32 in-band to broad-band ratio */
- 0x0FF5 /* shift-mask 0x0FF (look at 16 half-frames) bit count = 5 */
- },
- { /* f700 */
- 27844, /* A1 = -1.699463 */
- -32563, /* A2 = 0.993744 */
- -366, /* B2 = -0.011187 */
- 0, /* B1 = 0.000000 */
- 366, /* B0 = 0.011187 */
- 27797, /* A1 = -1.696655 */
- -32686, /* A2 = 0.997498 */
- 22748, /* B2 = 0.694214 */
- -19235, /* B1 = -1.174072 */
- 22748, /* B0 = 0.694214 */
- 27995, /* A1 = -1.708740 */
- -32688, /* A2 = 0.997559 */
- 2964, /* B2 = 0.090477 */
- -2546, /* B1 = -0.155449 */
- 2964, /* B0 = 0.090477 */
- 5, /* Internal filter scaling */
- 159, /* Minimum in-band energy threshold */
- 21, /* 21/32 in-band to broad-band ratio */
- 0x0FF5 /* shift-mask 0x0FF (look at 16 half-frames) bit count = 5 */
- },
- { /* f740 */
- 27297, /* A1 = -1.666077 */
- -32551, /* A2 = 0.993408 */
- -345, /* B2 = -0.010540 */
- 0, /* B1 = 0.000000 */
- 345, /* B0 = 0.010540 */
- 27240, /* A1 = -1.662598 */
- -32683, /* A2 = 0.997406 */
- 22560, /* B2 = 0.688477 */
- -18688, /* B1 = -1.140625 */
- 22560, /* B0 = 0.688477 */
- 27461, /* A1 = -1.676147 */
- -32684, /* A2 = 0.997467 */
- 3541, /* B2 = 0.108086 */
- -2985, /* B1 = -0.182220 */
- 3541, /* B0 = 0.108086 */
- 5, /* Internal filter scaling */
- 159, /* Minimum in-band energy threshold */
- 21, /* 21/32 in-band to broad-band ratio */
- 0x0FF5 /* shift-mask 0x0FF (look at 16 half-frames) bit count = 5 */
- },
- { /* f750 */
- 27155, /* A1 = -1.657410 */
- -32551, /* A2 = 0.993408 */
- -462, /* B2 = -0.014117 */
- 0, /* B1 = 0.000000 */
- 462, /* B0 = 0.014117 */
- 27097, /* A1 = -1.653870 */
- -32683, /* A2 = 0.997406 */
- 32495, /* B2 = 0.991699 */
- -26776, /* B1 = -1.634338 */
- 32495, /* B0 = 0.991699 */
- 27321, /* A1 = -1.667542 */
- -32684, /* A2 = 0.997467 */
- 1835, /* B2 = 0.056007 */
- -1539, /* B1 = -0.093948 */
- 1835, /* B0 = 0.056007 */
- 5, /* Internal filter scaling */
- 159, /* Minimum in-band energy threshold */
- 21, /* 21/32 in-band to broad-band ratio */
- 0x0FF5 /* shift-mask 0x0FF (look at 16 half-frames) bit count = 5 */
- },
- { /* f750_1450[] */
- 19298, /* A1 = 1.177917 */
- -24471, /* A2 = -0.746796 */
- -4152, /* B2 = -0.126709 */
- 0, /* B1 = 0 */
- 4152, /* B0 = 0.126709 */
- 12902, /* A1 = 0.787476 */
- -29091, /* A2 = -0.887817 */
- 12491, /* B2 = 0.38121 */
- -1794, /* B1 = -0.109528 */
- 12494, /* B0 = 0.381317 */
- 26291, /* A1 = 1.604736 */
- -30470, /* A2 = -0.929901 */
- 28859, /* B2 = 0.880737 */
- -26084, /* B1 = -1.592102 */
- 28861, /* B0 = 0.880798 */
- 7, /* Internal filter scaling */
- 159, /* Minimum in-band energy threshold */
- 21, /* 21/32 in-band to broad-band ratio */
- 0x0FF5 /* shift-mask 0x0FF (look at 16 half-frames) bit count = 5 */
- },
- { /* f770 */
- 26867, /* A1 = -1.639832 */
- -32551, /* A2 = 0.993408 */
- -123, /* B2 = -0.003755 */
- 0, /* B1 = 0.000000 */
- 123, /* B0 = 0.003755 */
- 26805, /* A1 = -1.636108 */
- -32683, /* A2 = 0.997406 */
- 17297, /* B2 = 0.527863 */
- -14096, /* B1 = -0.860382 */
- 17297, /* B0 = 0.527863 */
- 27034, /* A1 = -1.650085 */
- -32684, /* A2 = 0.997467 */
- 12958, /* B2 = 0.395477 */
- -10756, /* B1 = -0.656525 */
- 12958, /* B0 = 0.395477 */
- 5, /* Internal filter scaling */
- 159, /* Minimum in-band energy threshold */
- 21, /* 21/32 in-band to broad-band ratio */
- 0x0FF5 /* shift-mask 0x0FF (look at 16 half-frames) bit count = 5 */
- },
- { /* f800 */
- 26413, /* A1 = -1.612122 */
- -32547, /* A2 = 0.993286 */
- -223, /* B2 = -0.006825 */
- 0, /* B1 = 0.000000 */
- 223, /* B0 = 0.006825 */
- 26342, /* A1 = -1.607849 */
- -32686, /* A2 = 0.997498 */
- 6391, /* B2 = 0.195053 */
- -5120, /* B1 = -0.312531 */
- 6391, /* B0 = 0.195053 */
- 26593, /* A1 = -1.623108 */
- -32688, /* A2 = 0.997559 */
- 23681, /* B2 = 0.722717 */
- -19328, /* B1 = -1.179688 */
- 23681, /* B0 = 0.722717 */
- 5, /* Internal filter scaling */
- 159, /* Minimum in-band energy threshold */
- 21, /* 21/32 in-band to broad-band ratio */
- 0x0FF5 /* shift-mask 0x0FF (look at 16 half-frames) bit count = 5 */
- },
- { /* f816 */
- 26168, /* A1 = -1.597209 */
- -32528, /* A2 = 0.992706 */
- -235, /* B2 = -0.007182 */
- 0, /* B1 = 0.000000 */
- 235, /* B0 = 0.007182 */
- 26092, /* A1 = -1.592590 */
- -32675, /* A2 = 0.997192 */
- 20823, /* B2 = 0.635498 */
- -16510, /* B1 = -1.007751 */
- 20823, /* B0 = 0.635498 */
- 26363, /* A1 = -1.609070 */
- -32677, /* A2 = 0.997253 */
- 6739, /* B2 = 0.205688 */
- -5459, /* B1 = -0.333206 */
- 6739, /* B0 = 0.205688 */
- 5, /* Internal filter scaling */
- 159, /* Minimum in-band energy threshold */
- 21, /* 21/32 in-band to broad-band ratio */
- 0x0FF5 /* shift-mask 0x0FF (look at 16 half-frames) bit count = 5 */
- },
- { /* f850 */
- 25641, /* A1 = -1.565063 */
- -32536, /* A2 = 0.992950 */
- -121, /* B2 = -0.003707 */
- 0, /* B1 = 0.000000 */
- 121, /* B0 = 0.003707 */
- 25560, /* A1 = -1.560059 */
- -32684, /* A2 = 0.997437 */
- 18341, /* B2 = 0.559753 */
- -14252, /* B1 = -0.869904 */
- 18341, /* B0 = 0.559753 */
- 25837, /* A1 = -1.577026 */
- -32684, /* A2 = 0.997467 */
- 16679, /* B2 = 0.509003 */
- -13232, /* B1 = -0.807648 */
- 16679, /* B0 = 0.509003 */
- 5, /* Internal filter scaling */
- 159, /* Minimum in-band energy threshold */
- 21, /* 21/32 in-band to broad-band ratio */
- 0x0FF5 /* shift-mask 0x0FF (look at 16 half-frames) bit count = 5 */
- },
- { /* f857_1645[] */
- 16415, /* A1 = 1.001953 */
- -23669, /* A2 = -0.722321 */
- -4549, /* B2 = -0.138847 */
- 0, /* B1 = 0 */
- 4549, /* B0 = 0.138847 */
- 8456, /* A1 = 0.516174 */
- -28996, /* A2 = -0.884918 */
- 13753, /* B2 = 0.419724 */
- -12, /* B1 = -0.000763 */
- 13757, /* B0 = 0.419846 */
- 24632, /* A1 = 1.503418 */
- -30271, /* A2 = -0.923828 */
- 29070, /* B2 = 0.887146 */
- -25265, /* B1 = -1.542114 */
- 29073, /* B0 = 0.887268 */
- 7, /* Internal filter scaling */
- 159, /* Minimum in-band energy threshold */
- 21, /* 21/32 in-band to broad-band ratio */
- 0x0FF5 /* shift-mask 0x0FF (look at 16 half-frames) bit count = 5 */
- },
- { /* f900 */
- 24806, /* A1 = -1.514099 */
- -32501, /* A2 = 0.991852 */
- -326, /* B2 = -0.009969 */
- 0, /* B1 = 0.000000 */
- 326, /* B0 = 0.009969 */
- 24709, /* A1 = -1.508118 */
- -32659, /* A2 = 0.996674 */
- 20277, /* B2 = 0.618835 */
- -15182, /* B1 = -0.926636 */
- 20277, /* B0 = 0.618835 */
- 25022, /* A1 = -1.527222 */
- -32661, /* A2 = 0.996735 */
- 4320, /* B2 = 0.131836 */
- -3331, /* B1 = -0.203339 */
- 4320, /* B0 = 0.131836 */
- 5, /* Internal filter scaling */
- 159, /* Minimum in-band energy threshold */
- 21, /* 21/32 in-band to broad-band ratio */
- 0x0FF5 /* shift-mask 0x0FF (look at 16 half-frames) bit count = 5 */
- },
- { /* f900_1300[] */
- 19776, /* A1 = 1.207092 */
- -27437, /* A2 = -0.837341 */
- -2666, /* B2 = -0.081371 */
- 0, /* B1 = 0 */
- 2666, /* B0 = 0.081371 */
- 16302, /* A1 = 0.995026 */
- -30354, /* A2 = -0.926361 */
- 10389, /* B2 = 0.317062 */
- -3327, /* B1 = -0.203064 */
- 10389, /* B0 = 0.317062 */
- 24299, /* A1 = 1.483154 */
- -30930, /* A2 = -0.943909 */
- 25016, /* B2 = 0.763428 */
- -21171, /* B1 = -1.292236 */
- 25016, /* B0 = 0.763428 */
- 7, /* Internal filter scaling */
- 159, /* Minimum in-band energy threshold */
- 21, /* 21/32 in-band to broad-band ratio */
- 0x0FF5 /* shift-mask 0x0FF (look at 16 half-frames) bit count = 5 */
- },
- { /* f935_1215[] */
- 20554, /* A1 = 1.254517 */
- -28764, /* A2 = -0.877838 */
- -2048, /* B2 = -0.062515 */
- 0, /* B1 = 0 */
- 2048, /* B0 = 0.062515 */
- 18209, /* A1 = 1.11145 */
- -30951, /* A2 = -0.94458 */
- 9390, /* B2 = 0.286575 */
- -3955, /* B1 = -0.241455 */
- 9390, /* B0 = 0.286575 */
- 23902, /* A1 = 1.458923 */
- -31286, /* A2 = -0.954803 */
- 23252, /* B2 = 0.709595 */
- -19132, /* B1 = -1.167725 */
- 23252, /* B0 = 0.709595 */
- 7, /* Internal filter scaling */
- 159, /* Minimum in-band energy threshold */
- 21, /* 21/32 in-band to broad-band ratio */
- 0x0FF5 /* shift-mask 0x0FF (look at 16 half-frames) bit count = 5 */
- },
- { /* f941_1477[] */
- 17543, /* A1 = 1.07074 */
- -26220, /* A2 = -0.800201 */
- -3298, /* B2 = -0.100647 */
- 0, /* B1 = 0 */
- 3298, /* B0 = 0.100647 */
- 12423, /* A1 = 0.75827 */
- -30036, /* A2 = -0.916626 */
- 12651, /* B2 = 0.386078 */
- -2444, /* B1 = -0.14917 */
- 12653, /* B0 = 0.386154 */
- 23518, /* A1 = 1.435425 */
- -30745, /* A2 = -0.938293 */
- 27282, /* B2 = 0.832581 */
- -22529, /* B1 = -1.375122 */
- 27286, /* B0 = 0.832703 */
- 7, /* Internal filter scaling */
- 159, /* Minimum in-band energy threshold */
- 21, /* 21/32 in-band to broad-band ratio */
- 0x0FF5 /* shift-mask 0x0FF (look at 16 half-frames) bit count = 5 */
- },
- { /* f942 */
- 24104, /* A1 = -1.471252 */
- -32507, /* A2 = 0.992065 */
- -351, /* B2 = -0.010722 */
- 0, /* B1 = 0.000000 */
- 351, /* B0 = 0.010722 */
- 23996, /* A1 = -1.464600 */
- -32671, /* A2 = 0.997040 */
- 22848, /* B2 = 0.697266 */
- -16639, /* B1 = -1.015564 */
- 22848, /* B0 = 0.697266 */
- 24332, /* A1 = -1.485168 */
- -32673, /* A2 = 0.997101 */
- 4906, /* B2 = 0.149727 */
- -3672, /* B1 = -0.224174 */
- 4906, /* B0 = 0.149727 */
- 5, /* Internal filter scaling */
- 159, /* Minimum in-band energy threshold */
- 21, /* 21/32 in-band to broad-band ratio */
- 0x0FF5 /* shift-mask 0x0FF (look at 16 half-frames) bit count = 5 */
- },
- { /* f950 */
- 23967, /* A1 = -1.462830 */
- -32507, /* A2 = 0.992065 */
- -518, /* B2 = -0.015821 */
- 0, /* B1 = 0.000000 */
- 518, /* B0 = 0.015821 */
- 23856, /* A1 = -1.456055 */
- -32671, /* A2 = 0.997040 */
- 26287, /* B2 = 0.802246 */
- -19031, /* B1 = -1.161560 */
- 26287, /* B0 = 0.802246 */
- 24195, /* A1 = -1.476746 */
- -32673, /* A2 = 0.997101 */
- 2890, /* B2 = 0.088196 */
- -2151, /* B1 = -0.131317 */
- 2890, /* B0 = 0.088196 */
- 5, /* Internal filter scaling */
- 159, /* Minimum in-band energy threshold */
- 21, /* 21/32 in-band to broad-band ratio */
- 0x0FF5 /* shift-mask 0x0FF (look at 16 half-frames) bit count = 5 */
- },
- { /* f950_1400[] */
- 18294, /* A1 = 1.116638 */
- -26962, /* A2 = -0.822845 */
- -2914, /* B2 = -0.088936 */
- 0, /* B1 = 0 */
- 2914, /* B0 = 0.088936 */
- 14119, /* A1 = 0.861786 */
- -30227, /* A2 = -0.922455 */
- 11466, /* B2 = 0.349945 */
- -2833, /* B1 = -0.172943 */
- 11466, /* B0 = 0.349945 */
- 23431, /* A1 = 1.430115 */
- -30828, /* A2 = -0.940796 */
- 25331, /* B2 = 0.773071 */
- -20911, /* B1 = -1.276367 */
- 25331, /* B0 = 0.773071 */
- 7, /* Internal filter scaling */
- 159, /* Minimum in-band energy threshold */
- 21, /* 21/32 in-band to broad-band ratio */
- 0x0FF5 /* shift-mask 0x0FF (look at 16 half-frames) bit count = 5 */
- },
- { /* f975 */
- 23521, /* A1 = -1.435608 */
- -32489, /* A2 = 0.991516 */
- -193, /* B2 = -0.005915 */
- 0, /* B1 = 0.000000 */
- 193, /* B0 = 0.005915 */
- 23404, /* A1 = -1.428467 */
- -32655, /* A2 = 0.996582 */
- 17740, /* B2 = 0.541412 */
- -12567, /* B1 = -0.767029 */
- 17740, /* B0 = 0.541412 */
- 23753, /* A1 = -1.449829 */
- -32657, /* A2 = 0.996613 */
- 9090, /* B2 = 0.277405 */
- -6662, /* B1 = -0.406647 */
- 9090, /* B0 = 0.277405 */
- 5, /* Internal filter scaling */
- 159, /* Minimum in-band energy threshold */
- 21, /* 21/32 in-band to broad-band ratio */
- 0x0FF5 /* shift-mask 0x0FF (look at 16 half-frames) bit count = 5 */
- },
- { /* f1000 */
- 23071, /* A1 = -1.408203 */
- -32489, /* A2 = 0.991516 */
- -293, /* B2 = -0.008965 */
- 0, /* B1 = 0.000000 */
- 293, /* B0 = 0.008965 */
- 22951, /* A1 = -1.400818 */
- -32655, /* A2 = 0.996582 */
- 5689, /* B2 = 0.173645 */
- -3951, /* B1 = -0.241150 */
- 5689, /* B0 = 0.173645 */
- 23307, /* A1 = -1.422607 */
- -32657, /* A2 = 0.996613 */
- 18692, /* B2 = 0.570435 */
- -13447, /* B1 = -0.820770 */
- 18692, /* B0 = 0.570435 */
- 5, /* Internal filter scaling */
- 159, /* Minimum in-band energy threshold */
- 21, /* 21/32 in-band to broad-band ratio */
- 0x0FF5 /* shift-mask 0x0FF (look at 16 half-frames) bit count = 5 */
- },
- { /* f1020 */
- 22701, /* A1 = -1.385620 */
- -32474, /* A2 = 0.991058 */
- -292, /* B2 = -0.008933 */
- 0, /*163840 , B1 = 10.000000 */
- 292, /* B0 = 0.008933 */
- 22564, /* A1 = -1.377258 */
- -32655, /* A2 = 0.996552 */
- 20756, /* B2 = 0.633423 */
- -14176, /* B1 = -0.865295 */
- 20756, /* B0 = 0.633423 */
- 22960, /* A1 = -1.401428 */
- -32657, /* A2 = 0.996613 */
- 6520, /* B2 = 0.198990 */
- -4619, /* B1 = -0.281937 */
- 6520, /* B0 = 0.198990 */
- 5, /* Internal filter scaling */
- 159, /* Minimum in-band energy threshold */
- 21, /* 21/32 in-band to broad-band ratio */
- 0x0FF5 /* shift-mask 0x0FF (look at 16 half-frames) bit count = 5 */
- },
- { /* f1050 */
- 22142, /* A1 = -1.351501 */
- -32474, /* A2 = 0.991058 */
- -147, /* B2 = -0.004493 */
- 0, /* B1 = 0.000000 */
- 147, /* B0 = 0.004493 */
- 22000, /* A1 = -1.342834 */
- -32655, /* A2 = 0.996552 */
- 15379, /* B2 = 0.469360 */
- -10237, /* B1 = -0.624847 */
- 15379, /* B0 = 0.469360 */
- 22406, /* A1 = -1.367554 */
- -32657, /* A2 = 0.996613 */
- 17491, /* B2 = 0.533783 */
- -12096, /* B1 = -0.738312 */
- 17491, /* B0 = 0.533783 */
- 5, /* Internal filter scaling */
- 159, /* Minimum in-band energy threshold */
- 21, /* 21/32 in-band to broad-band ratio */
- 0x0FF5 /* shift-mask 0x0FF (look at 16 half-frames) bit count = 5 */
- },
- { /* f1100_1750[] */
- 12973, /* A1 = 0.79184 */
- -24916, /* A2 = -0.760376 */
- 6655, /* B2 = 0.203102 */
- 367, /* B1 = 0.0224 */
- 6657, /* B0 = 0.203171 */
- 5915, /* A1 = 0.361053 */
- -29560, /* A2 = -0.90213 */
- -7777, /* B2 = -0.23735 */
- 0, /* B1 = 0 */
- 7777, /* B0 = 0.23735 */
- 20510, /* A1 = 1.251892 */
- -30260, /* A2 = -0.923462 */
- 26662, /* B2 = 0.81366 */
- -20573, /* B1 = -1.255737 */
- 26668, /* B0 = 0.813843 */
- 7, /* Internal filter scaling */
- 159, /* Minimum in-band energy threshold */
- 21, /* 21/32 in-band to broad-band ratio */
- 0x0FF5 /* shift-mask 0x0FF (look at 16 half-frames) bit count = 5 */
- },
- { /* f1140 */
- 20392, /* A1 = -1.244629 */
- -32460, /* A2 = 0.990601 */
- -270, /* B2 = -0.008240 */
- 0, /* B1 = 0.000000 */
- 270, /* B0 = 0.008240 */
- 20218, /* A1 = -1.234009 */
- -32655, /* A2 = 0.996582 */
- 21337, /* B2 = 0.651154 */
- -13044, /* B1 = -0.796143 */
- 21337, /* B0 = 0.651154 */
- 20684, /* A1 = -1.262512 */
- -32657, /* A2 = 0.996643 */
- 8572, /* B2 = 0.261612 */
- -5476, /* B1 = -0.334244 */
- 8572, /* B0 = 0.261612 */
- 5, /* Internal filter scaling */
- 159, /* Minimum in-band energy threshold */
- 21, /* 21/32 in-band to broad-band ratio */
- 0x0FF5 /* shift-mask 0x0FF (look at 16 half-frames) bit count = 5 */
- },
- { /* f1200 */
- 19159, /* A1 = -1.169373 */
- -32456, /* A2 = 0.990509 */
- -335, /* B2 = -0.010252 */
- 0, /* B1 = 0.000000 */
- 335, /* B0 = 0.010252 */
- 18966, /* A1 = -1.157593 */
- -32661, /* A2 = 0.996735 */
- 6802, /* B2 = 0.207588 */
- -3900, /* B1 = -0.238098 */
- 6802, /* B0 = 0.207588 */
- 19467, /* A1 = -1.188232 */
- -32661, /* A2 = 0.996765 */
- 25035, /* B2 = 0.764008 */
- -15049, /* B1 = -0.918579 */
- 25035, /* B0 = 0.764008 */
- 5, /* Internal filter scaling */
- 159, /* Minimum in-band energy threshold */
- 21, /* 21/32 in-band to broad-band ratio */
- 0x0FF5 /* shift-mask 0x0FF (look at 16 half-frames) bit count = 5 */
- },
- { /* f1209 */
- 18976, /* A1 = -1.158264 */
- -32439, /* A2 = 0.989990 */
- -183, /* B2 = -0.005588 */
- 0, /* B1 = 0.000000 */
- 183, /* B0 = 0.005588 */
- 18774, /* A1 = -1.145874 */
- -32650, /* A2 = 0.996429 */
- 15468, /* B2 = 0.472076 */
- -8768, /* B1 = -0.535217 */
- 15468, /* B0 = 0.472076 */
- 19300, /* A1 = -1.177979 */
- -32652, /* A2 = 0.996490 */
- 19840, /* B2 = 0.605499 */
- -11842, /* B1 = -0.722809 */
- 19840, /* B0 = 0.605499 */
- 5, /* Internal filter scaling */
- 159, /* Minimum in-band energy threshold */
- 21, /* 21/32 in-band to broad-band ratio */
- 0x0FF5 /* shift-mask 0x0FF (look at 16 half-frames) bit count = 5 */
- },
- { /* f1330 */
- 16357, /* A1 = -0.998413 */
- -32368, /* A2 = 0.987793 */
- -217, /* B2 = -0.006652 */
- 0, /* B1 = 0.000000 */
- 217, /* B0 = 0.006652 */
- 16107, /* A1 = -0.983126 */
- -32601, /* A2 = 0.994904 */
- 11602, /* B2 = 0.354065 */
- -5555, /* B1 = -0.339111 */
- 11602, /* B0 = 0.354065 */
- 16722, /* A1 = -1.020630 */
- -32603, /* A2 = 0.994965 */
- 15574, /* B2 = 0.475311 */
- -8176, /* B1 = -0.499069 */
- 15574, /* B0 = 0.475311 */
- 5, /* Internal filter scaling */
- 159, /* Minimum in-band energy threshold */
- 21, /* 21/32 in-band to broad-band ratio */
- 0x0FF5 /* shift-mask 0x0FF (look at 16 half-frames) bit count = 5 */
- },
- { /* f1336 */
- 16234, /* A1 = -0.990875 */
- 32404, /* A2 = -0.988922 */
- -193, /* B2 = -0.005908 */
- 0, /* B1 = 0.000000 */
- 193, /* B0 = 0.005908 */
- 15986, /* A1 = -0.975769 */
- -32632, /* A2 = 0.995880 */
- 18051, /* B2 = 0.550903 */
- -8658, /* B1 = -0.528473 */
- 18051, /* B0 = 0.550903 */
- 16591, /* A1 = -1.012695 */
- -32634, /* A2 = 0.995941 */
- 15736, /* B2 = 0.480240 */
- -8125, /* B1 = -0.495926 */
- 15736, /* B0 = 0.480240 */
- 5, /* Internal filter scaling */
- 159, /* Minimum in-band energy threshold */
- 21, /* 21/32 in-band to broad-band ratio */
- 0x0FF5 /* shift-mask 0x0FF (look at 16 half-frames) bit count = 5 */
- },
- { /* f1366 */
- 15564, /* A1 = -0.949982 */
- -32404, /* A2 = 0.988922 */
- -269, /* B2 = -0.008216 */
- 0, /* B1 = 0.000000 */
- 269, /* B0 = 0.008216 */
- 15310, /* A1 = -0.934479 */
- -32632, /* A2 = 0.995880 */
- 10815, /* B2 = 0.330063 */
- -4962, /* B1 = -0.302887 */
- 10815, /* B0 = 0.330063 */
- 15924, /* A1 = -0.971924 */
- -32634, /* A2 = 0.995941 */
- 18880, /* B2 = 0.576172 */
- -9364, /* B1 = -0.571594 */
- 18880, /* B0 = 0.576172 */
- 5, /* Internal filter scaling */
- 159, /* Minimum in-band energy threshold */
- 21, /* 21/32 in-band to broad-band ratio */
- 0x0FF5 /* shift-mask 0x0FF (look at 16 half-frames) bit count = 5 */
- },
- { /* f1380 */
- 15247, /* A1 = -0.930603 */
- -32397, /* A2 = 0.988708 */
- -244, /* B2 = -0.007451 */
- 0, /* B1 = 0.000000 */
- 244, /* B0 = 0.007451 */
- 14989, /* A1 = -0.914886 */
- -32627, /* A2 = 0.995697 */
- 18961, /* B2 = 0.578644 */
- -8498, /* B1 = -0.518707 */
- 18961, /* B0 = 0.578644 */
- 15608, /* A1 = -0.952667 */
- -32628, /* A2 = 0.995758 */
- 11145, /* B2 = 0.340134 */
- -5430, /* B1 = -0.331467 */
- 11145, /* B0 = 0.340134 */
- 5, /* Internal filter scaling */
- 159, /* Minimum in-band energy threshold */
- 21, /* 21/32 in-band to broad-band ratio */
- 0x0FF5 /* shift-mask 0x0FF (look at 16 half-frames) bit count = 5 */
- },
- { /* f1400 */
- 14780, /* A1 = -0.902130 */
- -32393, /* A2 = 0.988586 */
- -396, /* B2 = -0.012086 */
- 0, /* B1 = 0.000000 */
- 396, /* B0 = 0.012086 */
- 14510, /* A1 = -0.885651 */
- -32630, /* A2 = 0.995819 */
- 6326, /* B2 = 0.193069 */
- -2747, /* B1 = -0.167671 */
- 6326, /* B0 = 0.193069 */
- 15154, /* A1 = -0.924957 */
- -32632, /* A2 = 0.995850 */
- 23235, /* B2 = 0.709076 */
- -10983, /* B1 = -0.670380 */
- 23235, /* B0 = 0.709076 */
- 5, /* Internal filter scaling */
- 159, /* Minimum in-band energy threshold */
- 21, /* 21/32 in-band to broad-band ratio */
- 0x0FF5 /* shift-mask 0x0FF (look at 16 half-frames) bit count = 5 */
- },
- { /* f1477 */
- 13005, /* A1 = -0.793793 */
- -32368, /* A2 = 0.987823 */
- -500, /* B2 = -0.015265 */
- 0, /* B1 = 0.000000 */
- 500, /* B0 = 0.015265 */
- 12708, /* A1 = -0.775665 */
- -32615, /* A2 = 0.995331 */
- 11420, /* B2 = 0.348526 */
- -4306, /* B1 = -0.262833 */
- 11420, /* B0 = 0.348526 */
- 13397, /* A1 = -0.817688 */
- -32615, /* A2 = 0.995361 */
- 9454, /* B2 = 0.288528 */
- -3981, /* B1 = -0.243027 */
- 9454, /* B0 = 0.288528 */
- 5, /* Internal filter scaling */
- 159, /* Minimum in-band energy threshold */
- 21, /* 21/32 in-band to broad-band ratio */
- 0x0FF5 /* shift-mask 0x0FF (look at 16 half-frames) bit count = 5 */
- },
- { /* f1600 */
- 10046, /* A1 = -0.613190 */
- -32331, /* A2 = 0.986694 */
- -455, /* B2 = -0.013915 */
- 0, /* B1 = 0.000000 */
- 455, /* B0 = 0.013915 */
- 9694, /* A1 = -0.591705 */
- -32601, /* A2 = 0.994934 */
- 6023, /* B2 = 0.183815 */
- -1708, /* B1 = -0.104279 */
- 6023, /* B0 = 0.183815 */
- 10478, /* A1 = -0.639587 */
- -32603, /* A2 = 0.994965 */
- 22031, /* B2 = 0.672333 */
- -7342, /* B1 = -0.448151 */
- 22031, /* B0 = 0.672333 */
- 5, /* Internal filter scaling */
- 159, /* Minimum in-band energy threshold */
- 21, /* 21/32 in-band to broad-band ratio */
- 0x0FF5 /* shift-mask 0x0FF (look at 16 half-frames) bit count = 5 */
- },
- { /* f1633_1638[] */
- 9181, /* A1 = 0.560394 */
- -32256, /* A2 = -0.984375 */
- -556, /* B2 = -0.016975 */
- 0, /* B1 = 0 */
- 556, /* B0 = 0.016975 */
- 8757, /* A1 = 0.534515 */
- -32574, /* A2 = -0.99408 */
- 8443, /* B2 = 0.25769 */
- -2135, /* B1 = -0.130341 */
- 8443, /* B0 = 0.25769 */
- 9691, /* A1 = 0.591522 */
- -32574, /* A2 = -0.99411 */
- 15446, /* B2 = 0.471375 */
- -4809, /* B1 = -0.293579 */
- 15446, /* B0 = 0.471375 */
- 7, /* Internal filter scaling */
- 159, /* Minimum in-band energy threshold */
- 21, /* 21/32 in-band to broad-band ratio */
- 0x0FF5 /* shift-mask 0x0FF (look at 16 half-frames) bit count = 5 */
- },
- { /* f1800 */
- 5076, /* A1 = -0.309875 */
- -32304, /* A2 = 0.985840 */
- -508, /* B2 = -0.015503 */
- 0, /* B1 = 0.000000 */
- 508, /* B0 = 0.015503 */
- 4646, /* A1 = -0.283600 */
- -32605, /* A2 = 0.995026 */
- 6742, /* B2 = 0.205780 */
- -878, /* B1 = -0.053635 */
- 6742, /* B0 = 0.205780 */
- 5552, /* A1 = -0.338928 */
- -32605, /* A2 = 0.995056 */
- 23667, /* B2 = 0.722260 */
- -4297, /* B1 = -0.262329 */
- 23667, /* B0 = 0.722260 */
- 5, /* Internal filter scaling */
- 159, /* Minimum in-band energy threshold */
- 21, /* 21/32 in-band to broad-band ratio */
- 0x0FF5 /* shift-mask 0x0FF (look at 16 half-frames) bit count = 5 */
- },
- { /* f1860 */
- 3569, /* A1 = -0.217865 */
- -32292, /* A2 = 0.985504 */
- -239, /* B2 = -0.007322 */
- 0, /* B1 = 0.000000 */
- 239, /* B0 = 0.007322 */
- 3117, /* A1 = -0.190277 */
- -32603, /* A2 = 0.994965 */
- 18658, /* B2 = 0.569427 */
- -1557, /* B1 = -0.095032 */
- 18658, /* B0 = 0.569427 */
- 4054, /* A1 = -0.247437 */
- -32603, /* A2 = 0.994965 */
- 18886, /* B2 = 0.576385 */
- -2566, /* B1 = -0.156647 */
- 18886, /* B0 = 0.576385 */
- 5, /* Internal filter scaling */
- 159, /* Minimum in-band energy threshold */
- 21, /* 21/32 in-band to broad-band ratio */
- 0x0FF5 /* shift-mask 0x0FF (look at 16 half-frames) bit count = 5 */
- },
-};
-static int ixj_init_filter(IXJ *j, IXJ_FILTER * jf)
-{
- unsigned short cmd;
- int cnt, max;
-
- if (jf->filter > 3) {
- return -1;
- }
- if (ixj_WriteDSPCommand(0x5154 + jf->filter, j)) /* Select Filter */
-
- return -1;
- if (!jf->enable) {
- if (ixj_WriteDSPCommand(0x5152, j)) /* Disable Filter */
-
- return -1;
- else
- return 0;
- } else {
- if (ixj_WriteDSPCommand(0x5153, j)) /* Enable Filter */
-
- return -1;
- /* Select the filter (f0 - f3) to use. */
- if (ixj_WriteDSPCommand(0x5154 + jf->filter, j))
- return -1;
- }
- if (jf->freq < 12 && jf->freq > 3) {
- /* Select the frequency for the selected filter. */
- if (ixj_WriteDSPCommand(0x5170 + jf->freq, j))
- return -1;
- } else if (jf->freq > 11) {
- /* We need to load a programmable filter set for undefined */
- /* frequencies. So we will point the filter to a programmable set. */
- /* Since there are only 4 filters and 4 programmable sets, we will */
- /* just point the filter to the same number set and program it for the */
- /* frequency we want. */
- if (ixj_WriteDSPCommand(0x5170 + jf->filter, j))
- return -1;
- if (j->ver.low != 0x12) {
- cmd = 0x515B;
- max = 19;
- } else {
- cmd = 0x515E;
- max = 15;
- }
- if (ixj_WriteDSPCommand(cmd, j))
- return -1;
- for (cnt = 0; cnt < max; cnt++) {
- if (ixj_WriteDSPCommand(tone_table[jf->freq - 12][cnt], j))
- return -1;
- }
- }
- j->filter_en[jf->filter] = jf->enable;
- return 0;
-}
-
-static int ixj_init_filter_raw(IXJ *j, IXJ_FILTER_RAW * jfr)
-{
- unsigned short cmd;
- int cnt, max;
- if (jfr->filter > 3) {
- return -1;
- }
- if (ixj_WriteDSPCommand(0x5154 + jfr->filter, j)) /* Select Filter */
- return -1;
-
- if (!jfr->enable) {
- if (ixj_WriteDSPCommand(0x5152, j)) /* Disable Filter */
- return -1;
- else
- return 0;
- } else {
- if (ixj_WriteDSPCommand(0x5153, j)) /* Enable Filter */
- return -1;
- /* Select the filter (f0 - f3) to use. */
- if (ixj_WriteDSPCommand(0x5154 + jfr->filter, j))
- return -1;
- }
- /* We need to load a programmable filter set for undefined */
- /* frequencies. So we will point the filter to a programmable set. */
- /* Since there are only 4 filters and 4 programmable sets, we will */
- /* just point the filter to the same number set and program it for the */
- /* frequency we want. */
- if (ixj_WriteDSPCommand(0x5170 + jfr->filter, j))
- return -1;
- if (j->ver.low != 0x12) {
- cmd = 0x515B;
- max = 19;
- } else {
- cmd = 0x515E;
- max = 15;
- }
- if (ixj_WriteDSPCommand(cmd, j))
- return -1;
- for (cnt = 0; cnt < max; cnt++) {
- if (ixj_WriteDSPCommand(jfr->coeff[cnt], j))
- return -1;
- }
- j->filter_en[jfr->filter] = jfr->enable;
- return 0;
-}
-
-static int ixj_init_tone(IXJ *j, IXJ_TONE * ti)
-{
- int freq0, freq1;
- unsigned short data;
- if (ti->freq0) {
- freq0 = ti->freq0;
- } else {
- freq0 = 0x7FFF;
- }
-
- if (ti->freq1) {
- freq1 = ti->freq1;
- } else {
- freq1 = 0x7FFF;
- }
-
- if(ti->tone_index > 12 && ti->tone_index < 28)
- {
- if (ixj_WriteDSPCommand(0x6800 + ti->tone_index, j))
- return -1;
- if (ixj_WriteDSPCommand(0x6000 + (ti->gain1 << 4) + ti->gain0, j))
- return -1;
- data = freq0;
- if (ixj_WriteDSPCommand(data, j))
- return -1;
- data = freq1;
- if (ixj_WriteDSPCommand(data, j))
- return -1;
- }
- return freq0;
-}
-
diff --git a/drivers/staging/telephony/ixj.h b/drivers/staging/telephony/ixj.h
deleted file mode 100644
index 2c84113..0000000
--- a/drivers/staging/telephony/ixj.h
+++ /dev/null
@@ -1,1322 +0,0 @@
-/******************************************************************************
- * ixj.h
- *
- *
- * Device Driver for Quicknet Technologies, Inc.'s Telephony cards
- * including the Internet PhoneJACK, Internet PhoneJACK Lite,
- * Internet PhoneJACK PCI, Internet LineJACK, Internet PhoneCARD and
- * SmartCABLE
- *
- * (c) Copyright 1999-2001 Quicknet Technologies, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- * Author: Ed Okerson, <eokerson@quicknet.net>
- *
- * Contributors: Greg Herlein, <gherlein@quicknet.net>
- * David W. Erhart, <derhart@quicknet.net>
- * John Sellers, <jsellers@quicknet.net>
- * Mike Preston, <mpreston@quicknet.net>
- *
- * More information about the hardware related to this driver can be found
- * at our website: http://www.quicknet.net
- *
- * Fixes:
- *
- * IN NO EVENT SHALL QUICKNET TECHNOLOGIES, INC. BE LIABLE TO ANY PARTY FOR
- * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT
- * OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF QUICKNET
- * TECHNOLOGIES, INC.HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * QUICKNET TECHNOLOGIES, INC. SPECIFICALLY DISCLAIMS ANY WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS
- * ON AN "AS IS" BASIS, AND QUICKNET TECHNOLOGIES, INC. HAS NO OBLIGATION
- * TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS.
- *
- *****************************************************************************/
-#define IXJ_VERSION 3031
-
-#include <linux/types.h>
-
-#include <linux/ixjuser.h>
-#include <linux/phonedev.h>
-
-typedef __u16 WORD;
-typedef __u32 DWORD;
-typedef __u8 BYTE;
-
-#ifndef IXJMAX
-#define IXJMAX 16
-#endif
-
-/******************************************************************************
-*
-* This structure when unioned with the structures below makes simple byte
-* access to the registers easier.
-*
-******************************************************************************/
-typedef struct {
- unsigned char low;
- unsigned char high;
-} BYTES;
-
-typedef union {
- BYTES bytes;
- short word;
-} IXJ_WORD;
-
-typedef struct{
- unsigned int b0:1;
- unsigned int b1:1;
- unsigned int b2:1;
- unsigned int b3:1;
- unsigned int b4:1;
- unsigned int b5:1;
- unsigned int b6:1;
- unsigned int b7:1;
-} IXJ_CBITS;
-
-typedef union{
- IXJ_CBITS cbits;
- char cbyte;
-} IXJ_CBYTE;
-
-/******************************************************************************
-*
-* This structure represents the Hardware Control Register of the CT8020/8021
-* The CT8020 is used in the Internet PhoneJACK, and the 8021 in the
-* Internet LineJACK
-*
-******************************************************************************/
-typedef struct {
- unsigned int rxrdy:1;
- unsigned int txrdy:1;
- unsigned int status:1;
- unsigned int auxstatus:1;
- unsigned int rxdma:1;
- unsigned int txdma:1;
- unsigned int rxburst:1;
- unsigned int txburst:1;
- unsigned int dmadir:1;
- unsigned int cont:1;
- unsigned int irqn:1;
- unsigned int t:5;
-} HCRBIT;
-
-typedef union {
- HCRBIT bits;
- BYTES bytes;
-} HCR;
-
-/******************************************************************************
-*
-* This structure represents the Hardware Status Register of the CT8020/8021
-* The CT8020 is used in the Internet PhoneJACK, and the 8021 in the
-* Internet LineJACK
-*
-******************************************************************************/
-typedef struct {
- unsigned int controlrdy:1;
- unsigned int auxctlrdy:1;
- unsigned int statusrdy:1;
- unsigned int auxstatusrdy:1;
- unsigned int rxrdy:1;
- unsigned int txrdy:1;
- unsigned int restart:1;
- unsigned int irqn:1;
- unsigned int rxdma:1;
- unsigned int txdma:1;
- unsigned int cohostshutdown:1;
- unsigned int t:5;
-} HSRBIT;
-
-typedef union {
- HSRBIT bits;
- BYTES bytes;
-} HSR;
-
-/******************************************************************************
-*
-* This structure represents the General Purpose IO Register of the CT8020/8021
-* The CT8020 is used in the Internet PhoneJACK, and the 8021 in the
-* Internet LineJACK
-*
-******************************************************************************/
-typedef struct {
- unsigned int x:1;
- unsigned int gpio1:1;
- unsigned int gpio2:1;
- unsigned int gpio3:1;
- unsigned int gpio4:1;
- unsigned int gpio5:1;
- unsigned int gpio6:1;
- unsigned int gpio7:1;
- unsigned int xread:1;
- unsigned int gpio1read:1;
- unsigned int gpio2read:1;
- unsigned int gpio3read:1;
- unsigned int gpio4read:1;
- unsigned int gpio5read:1;
- unsigned int gpio6read:1;
- unsigned int gpio7read:1;
-} GPIOBIT;
-
-typedef union {
- GPIOBIT bits;
- BYTES bytes;
- unsigned short word;
-} GPIO;
-
-/******************************************************************************
-*
-* This structure represents the Line Monitor status response
-*
-******************************************************************************/
-typedef struct {
- unsigned int digit:4;
- unsigned int cpf_valid:1;
- unsigned int dtmf_valid:1;
- unsigned int peak:1;
- unsigned int z:1;
- unsigned int f0:1;
- unsigned int f1:1;
- unsigned int f2:1;
- unsigned int f3:1;
- unsigned int frame:4;
-} LMON;
-
-typedef union {
- LMON bits;
- BYTES bytes;
-} DTMF;
-
-typedef struct {
- unsigned int z:7;
- unsigned int dtmf_en:1;
- unsigned int y:4;
- unsigned int F3:1;
- unsigned int F2:1;
- unsigned int F1:1;
- unsigned int F0:1;
-} CP;
-
-typedef union {
- CP bits;
- BYTES bytes;
-} CPTF;
-
-/******************************************************************************
-*
-* This structure represents the Status Control Register on the Internet
-* LineJACK
-*
-******************************************************************************/
-typedef struct {
- unsigned int c0:1;
- unsigned int c1:1;
- unsigned int stereo:1;
- unsigned int daafsyncen:1;
- unsigned int led1:1;
- unsigned int led2:1;
- unsigned int led3:1;
- unsigned int led4:1;
-} PSCRWI; /* Internet LineJACK and Internet PhoneJACK Lite */
-
-typedef struct {
- unsigned int eidp:1;
- unsigned int eisd:1;
- unsigned int x:6;
-} PSCRWP; /* Internet PhoneJACK PCI */
-
-typedef union {
- PSCRWI bits;
- PSCRWP pcib;
- char byte;
-} PLD_SCRW;
-
-typedef struct {
- unsigned int c0:1;
- unsigned int c1:1;
- unsigned int x:1;
- unsigned int d0ee:1;
- unsigned int mixerbusy:1;
- unsigned int sci:1;
- unsigned int dspflag:1;
- unsigned int daaflag:1;
-} PSCRRI;
-
-typedef struct {
- unsigned int eidp:1;
- unsigned int eisd:1;
- unsigned int x:4;
- unsigned int dspflag:1;
- unsigned int det:1;
-} PSCRRP;
-
-typedef union {
- PSCRRI bits;
- PSCRRP pcib;
- char byte;
-} PLD_SCRR;
-
-/******************************************************************************
-*
-* These structures represents the SLIC Control Register on the
-* Internet LineJACK
-*
-******************************************************************************/
-typedef struct {
- unsigned int c1:1;
- unsigned int c2:1;
- unsigned int c3:1;
- unsigned int b2en:1;
- unsigned int spken:1;
- unsigned int rly1:1;
- unsigned int rly2:1;
- unsigned int rly3:1;
-} PSLICWRITE;
-
-typedef struct {
- unsigned int state:3;
- unsigned int b2en:1;
- unsigned int spken:1;
- unsigned int c3:1;
- unsigned int potspstn:1;
- unsigned int det:1;
-} PSLICREAD;
-
-typedef struct {
- unsigned int c1:1;
- unsigned int c2:1;
- unsigned int c3:1;
- unsigned int b2en:1;
- unsigned int e1:1;
- unsigned int mic:1;
- unsigned int spk:1;
- unsigned int x:1;
-} PSLICPCI;
-
-typedef union {
- PSLICPCI pcib;
- PSLICWRITE bits;
- PSLICREAD slic;
- char byte;
-} PLD_SLICW;
-
-typedef union {
- PSLICPCI pcib;
- PSLICREAD bits;
- char byte;
-} PLD_SLICR;
-
-/******************************************************************************
-*
-* These structures represents the Clock Control Register on the
-* Internet LineJACK
-*
-******************************************************************************/
-typedef struct {
- unsigned int clk0:1;
- unsigned int clk1:1;
- unsigned int clk2:1;
- unsigned int x0:1;
- unsigned int slic_e1:1;
- unsigned int x1:1;
- unsigned int x2:1;
- unsigned int x3:1;
-} PCLOCK;
-
-typedef union {
- PCLOCK bits;
- char byte;
-} PLD_CLOCK;
-
-/******************************************************************************
-*
-* These structures deal with the mixer on the Internet LineJACK
-*
-******************************************************************************/
-
-typedef struct {
- unsigned short vol[10];
- unsigned int recsrc;
- unsigned int modcnt;
- unsigned short micpreamp;
-} MIX;
-
-/******************************************************************************
-*
-* These structures deal with the control logic on the Internet PhoneCARD
-*
-******************************************************************************/
-typedef struct {
- unsigned int x0:4; /* unused bits */
-
- unsigned int ed:1; /* Event Detect */
-
- unsigned int drf:1; /* SmartCABLE Removal Flag 1=no cable */
-
- unsigned int dspf:1; /* DSP Flag 1=DSP Ready */
-
- unsigned int crr:1; /* Control Register Ready */
-
-} COMMAND_REG1;
-
-typedef union {
- COMMAND_REG1 bits;
- unsigned char byte;
-} PCMCIA_CR1;
-
-typedef struct {
- unsigned int x0:4; /* unused bits */
-
- unsigned int rstc:1; /* SmartCABLE Reset */
-
- unsigned int pwr:1; /* SmartCABLE Power */
-
- unsigned int x1:2; /* unused bits */
-
-} COMMAND_REG2;
-
-typedef union {
- COMMAND_REG2 bits;
- unsigned char byte;
-} PCMCIA_CR2;
-
-typedef struct {
- unsigned int addr:5; /* R/W SmartCABLE Register Address */
-
- unsigned int rw:1; /* Read / Write flag */
-
- unsigned int dev:2; /* 2 bit SmartCABLE Device Address */
-
-} CONTROL_REG;
-
-typedef union {
- CONTROL_REG bits;
- unsigned char byte;
-} PCMCIA_SCCR;
-
-typedef struct {
- unsigned int hsw:1;
- unsigned int det:1;
- unsigned int led2:1;
- unsigned int led1:1;
- unsigned int ring1:1;
- unsigned int ring0:1;
- unsigned int x:1;
- unsigned int powerdown:1;
-} PCMCIA_SLIC_REG;
-
-typedef union {
- PCMCIA_SLIC_REG bits;
- unsigned char byte;
-} PCMCIA_SLIC;
-
-typedef struct {
- unsigned int cpd:1; /* Chip Power Down */
-
- unsigned int mpd:1; /* MIC Bias Power Down */
-
- unsigned int hpd:1; /* Handset Drive Power Down */
-
- unsigned int lpd:1; /* Line Drive Power Down */
-
- unsigned int spd:1; /* Speaker Drive Power Down */
-
- unsigned int x:2; /* unused bits */
-
- unsigned int sr:1; /* Software Reset */
-
-} Si3CONTROL1;
-
-typedef union {
- Si3CONTROL1 bits;
- unsigned char byte;
-} Si3C1;
-
-typedef struct {
- unsigned int al:1; /* Analog Loopback DAC analog -> ADC analog */
-
- unsigned int dl2:1; /* Digital Loopback DAC -> ADC one bit */
-
- unsigned int dl1:1; /* Digital Loopback ADC -> DAC one bit */
-
- unsigned int pll:1; /* 1 = div 10, 0 = div 5 */
-
- unsigned int hpd:1; /* HPF disable */
-
- unsigned int x:3; /* unused bits */
-
-} Si3CONTROL2;
-
-typedef union {
- Si3CONTROL2 bits;
- unsigned char byte;
-} Si3C2;
-
-typedef struct {
- unsigned int iir:1; /* 1 enables IIR, 0 enables FIR */
-
- unsigned int him:1; /* Handset Input Mute */
-
- unsigned int mcm:1; /* MIC In Mute */
-
- unsigned int mcg:2; /* MIC In Gain */
-
- unsigned int lim:1; /* Line In Mute */
-
- unsigned int lig:2; /* Line In Gain */
-
-} Si3RXGAIN;
-
-typedef union {
- Si3RXGAIN bits;
- unsigned char byte;
-} Si3RXG;
-
-typedef struct {
- unsigned int hom:1; /* Handset Out Mute */
-
- unsigned int lom:1; /* Line Out Mute */
-
- unsigned int rxg:5; /* RX PGA Gain */
-
- unsigned int x:1; /* unused bit */
-
-} Si3ADCVOLUME;
-
-typedef union {
- Si3ADCVOLUME bits;
- unsigned char byte;
-} Si3ADC;
-
-typedef struct {
- unsigned int srm:1; /* Speaker Right Mute */
-
- unsigned int slm:1; /* Speaker Left Mute */
-
- unsigned int txg:5; /* TX PGA Gain */
-
- unsigned int x:1; /* unused bit */
-
-} Si3DACVOLUME;
-
-typedef union {
- Si3DACVOLUME bits;
- unsigned char byte;
-} Si3DAC;
-
-typedef struct {
- unsigned int x:5; /* unused bit */
-
- unsigned int losc:1; /* Line Out Short Circuit */
-
- unsigned int srsc:1; /* Speaker Right Short Circuit */
-
- unsigned int slsc:1; /* Speaker Left Short Circuit */
-
-} Si3STATUSREPORT;
-
-typedef union {
- Si3STATUSREPORT bits;
- unsigned char byte;
-} Si3STAT;
-
-typedef struct {
- unsigned int sot:2; /* Speaker Out Attenuation */
-
- unsigned int lot:2; /* Line Out Attenuation */
-
- unsigned int x:4; /* unused bits */
-
-} Si3ANALOGATTN;
-
-typedef union {
- Si3ANALOGATTN bits;
- unsigned char byte;
-} Si3AATT;
-
-/******************************************************************************
-*
-* These structures deal with the DAA on the Internet LineJACK
-*
-******************************************************************************/
-
-typedef struct _DAA_REGS {
- /*----------------------------------------------- */
- /* SOP Registers */
- /* */
- BYTE bySOP;
-
- union _SOP_REGS {
- struct _SOP {
- union /* SOP - CR0 Register */
- {
- BYTE reg;
- struct _CR0_BITREGS {
- BYTE CLK_EXT:1; /* cr0[0:0] */
-
- BYTE RIP:1; /* cr0[1:1] */
-
- BYTE AR:1; /* cr0[2:2] */
-
- BYTE AX:1; /* cr0[3:3] */
-
- BYTE FRR:1; /* cr0[4:4] */
-
- BYTE FRX:1; /* cr0[5:5] */
-
- BYTE IM:1; /* cr0[6:6] */
-
- BYTE TH:1; /* cr0[7:7] */
-
- } bitreg;
- } cr0;
-
- union /* SOP - CR1 Register */
- {
- BYTE reg;
- struct _CR1_REGS {
- BYTE RM:1; /* cr1[0:0] */
-
- BYTE RMR:1; /* cr1[1:1] */
-
- BYTE No_auto:1; /* cr1[2:2] */
-
- BYTE Pulse:1; /* cr1[3:3] */
-
- BYTE P_Tone1:1; /* cr1[4:4] */
-
- BYTE P_Tone2:1; /* cr1[5:5] */
-
- BYTE E_Tone1:1; /* cr1[6:6] */
-
- BYTE E_Tone2:1; /* cr1[7:7] */
-
- } bitreg;
- } cr1;
-
- union /* SOP - CR2 Register */
- {
- BYTE reg;
- struct _CR2_REGS {
- BYTE Call_II:1; /* CR2[0:0] */
-
- BYTE Call_I:1; /* CR2[1:1] */
-
- BYTE Call_en:1; /* CR2[2:2] */
-
- BYTE Call_pon:1; /* CR2[3:3] */
-
- BYTE IDR:1; /* CR2[4:4] */
-
- BYTE COT_R:3; /* CR2[5:7] */
-
- } bitreg;
- } cr2;
-
- union /* SOP - CR3 Register */
- {
- BYTE reg;
- struct _CR3_REGS {
- BYTE DHP_X:1; /* CR3[0:0] */
-
- BYTE DHP_R:1; /* CR3[1:1] */
-
- BYTE Cal_pctl:1; /* CR3[2:2] */
-
- BYTE SEL:1; /* CR3[3:3] */
-
- BYTE TestLoops:4; /* CR3[4:7] */
-
- } bitreg;
- } cr3;
-
- union /* SOP - CR4 Register */
- {
- BYTE reg;
- struct _CR4_REGS {
- BYTE Fsc_en:1; /* CR4[0:0] */
-
- BYTE Int_en:1; /* CR4[1:1] */
-
- BYTE AGX:2; /* CR4[2:3] */
-
- BYTE AGR_R:2; /* CR4[4:5] */
-
- BYTE AGR_Z:2; /* CR4[6:7] */
-
- } bitreg;
- } cr4;
-
- union /* SOP - CR5 Register */
- {
- BYTE reg;
- struct _CR5_REGS {
- BYTE V_0:1; /* CR5[0:0] */
-
- BYTE V_1:1; /* CR5[1:1] */
-
- BYTE V_2:1; /* CR5[2:2] */
-
- BYTE V_3:1; /* CR5[3:3] */
-
- BYTE V_4:1; /* CR5[4:4] */
-
- BYTE V_5:1; /* CR5[5:5] */
-
- BYTE V_6:1; /* CR5[6:6] */
-
- BYTE V_7:1; /* CR5[7:7] */
-
- } bitreg;
- } cr5;
-
- union /* SOP - CR6 Register */
- {
- BYTE reg;
- struct _CR6_REGS {
- BYTE reserved:8; /* CR6[0:7] */
-
- } bitreg;
- } cr6;
-
- union /* SOP - CR7 Register */
- {
- BYTE reg;
- struct _CR7_REGS {
- BYTE reserved:8; /* CR7[0:7] */
-
- } bitreg;
- } cr7;
- } SOP;
-
- BYTE ByteRegs[sizeof(struct _SOP)];
-
- } SOP_REGS;
-
- /* DAA_REGS.SOP_REGS.SOP.CR5.reg */
- /* DAA_REGS.SOP_REGS.SOP.CR5.bitreg */
- /* DAA_REGS.SOP_REGS.SOP.CR5.bitreg.V_2 */
- /* DAA_REGS.SOP_REGS.ByteRegs[5] */
-
- /*----------------------------------------------- */
- /* XOP Registers */
- /* */
- BYTE byXOP;
-
- union _XOP_REGS {
- struct _XOP {
- union XOPXR0/* XOP - XR0 Register - Read values */
- {
- BYTE reg;
- struct _XR0_BITREGS {
- BYTE SI_0:1; /* XR0[0:0] - Read */
-
- BYTE SI_1:1; /* XR0[1:1] - Read */
-
- BYTE VDD_OK:1; /* XR0[2:2] - Read */
-
- BYTE Caller_ID:1; /* XR0[3:3] - Read */
-
- BYTE RING:1; /* XR0[4:4] - Read */
-
- BYTE Cadence:1; /* XR0[5:5] - Read */
-
- BYTE Wake_up:1; /* XR0[6:6] - Read */
-
- BYTE RMR:1; /* XR0[7:7] - Read */
-
- } bitreg;
- } xr0;
-
- union /* XOP - XR1 Register */
- {
- BYTE reg;
- struct _XR1_BITREGS {
- BYTE M_SI_0:1; /* XR1[0:0] */
-
- BYTE M_SI_1:1; /* XR1[1:1] */
-
- BYTE M_VDD_OK:1; /* XR1[2:2] */
-
- BYTE M_Caller_ID:1; /* XR1[3:3] */
-
- BYTE M_RING:1; /* XR1[4:4] */
-
- BYTE M_Cadence:1; /* XR1[5:5] */
-
- BYTE M_Wake_up:1; /* XR1[6:6] */
-
- BYTE unused:1; /* XR1[7:7] */
-
- } bitreg;
- } xr1;
-
- union /* XOP - XR2 Register */
- {
- BYTE reg;
- struct _XR2_BITREGS {
- BYTE CTO0:1; /* XR2[0:0] */
-
- BYTE CTO1:1; /* XR2[1:1] */
-
- BYTE CTO2:1; /* XR2[2:2] */
-
- BYTE CTO3:1; /* XR2[3:3] */
-
- BYTE CTO4:1; /* XR2[4:4] */
-
- BYTE CTO5:1; /* XR2[5:5] */
-
- BYTE CTO6:1; /* XR2[6:6] */
-
- BYTE CTO7:1; /* XR2[7:7] */
-
- } bitreg;
- } xr2;
-
- union /* XOP - XR3 Register */
- {
- BYTE reg;
- struct _XR3_BITREGS {
- BYTE DCR0:1; /* XR3[0:0] */
-
- BYTE DCR1:1; /* XR3[1:1] */
-
- BYTE DCI:1; /* XR3[2:2] */
-
- BYTE DCU0:1; /* XR3[3:3] */
-
- BYTE DCU1:1; /* XR3[4:4] */
-
- BYTE B_off:1; /* XR3[5:5] */
-
- BYTE AGB0:1; /* XR3[6:6] */
-
- BYTE AGB1:1; /* XR3[7:7] */
-
- } bitreg;
- } xr3;
-
- union /* XOP - XR4 Register */
- {
- BYTE reg;
- struct _XR4_BITREGS {
- BYTE C_0:1; /* XR4[0:0] */
-
- BYTE C_1:1; /* XR4[1:1] */
-
- BYTE C_2:1; /* XR4[2:2] */
-
- BYTE C_3:1; /* XR4[3:3] */
-
- BYTE C_4:1; /* XR4[4:4] */
-
- BYTE C_5:1; /* XR4[5:5] */
-
- BYTE C_6:1; /* XR4[6:6] */
-
- BYTE C_7:1; /* XR4[7:7] */
-
- } bitreg;
- } xr4;
-
- union /* XOP - XR5 Register */
- {
- BYTE reg;
- struct _XR5_BITREGS {
- BYTE T_0:1; /* XR5[0:0] */
-
- BYTE T_1:1; /* XR5[1:1] */
-
- BYTE T_2:1; /* XR5[2:2] */
-
- BYTE T_3:1; /* XR5[3:3] */
-
- BYTE T_4:1; /* XR5[4:4] */
-
- BYTE T_5:1; /* XR5[5:5] */
-
- BYTE T_6:1; /* XR5[6:6] */
-
- BYTE T_7:1; /* XR5[7:7] */
-
- } bitreg;
- } xr5;
-
- union /* XOP - XR6 Register - Read Values */
- {
- BYTE reg;
- struct _XR6_BITREGS {
- BYTE CPS0:1; /* XR6[0:0] */
-
- BYTE CPS1:1; /* XR6[1:1] */
-
- BYTE unused1:2; /* XR6[2:3] */
-
- BYTE CLK_OFF:1; /* XR6[4:4] */
-
- BYTE unused2:3; /* XR6[5:7] */
-
- } bitreg;
- } xr6;
-
- union /* XOP - XR7 Register */
- {
- BYTE reg;
- struct _XR7_BITREGS {
- BYTE unused1:1; /* XR7[0:0] */
-
- BYTE Vdd0:1; /* XR7[1:1] */
-
- BYTE Vdd1:1; /* XR7[2:2] */
-
- BYTE unused2:5; /* XR7[3:7] */
-
- } bitreg;
- } xr7;
- } XOP;
-
- BYTE ByteRegs[sizeof(struct _XOP)];
-
- } XOP_REGS;
-
- /* DAA_REGS.XOP_REGS.XOP.XR7.reg */
- /* DAA_REGS.XOP_REGS.XOP.XR7.bitreg */
- /* DAA_REGS.XOP_REGS.XOP.XR7.bitreg.Vdd0 */
- /* DAA_REGS.XOP_REGS.ByteRegs[7] */
-
- /*----------------------------------------------- */
- /* COP Registers */
- /* */
- BYTE byCOP;
-
- union _COP_REGS {
- struct _COP {
- BYTE THFilterCoeff_1[8]; /* COP - TH Filter Coefficients, CODE=0, Part 1 */
-
- BYTE THFilterCoeff_2[8]; /* COP - TH Filter Coefficients, CODE=1, Part 2 */
-
- BYTE THFilterCoeff_3[8]; /* COP - TH Filter Coefficients, CODE=2, Part 3 */
-
- BYTE RingerImpendance_1[8]; /* COP - Ringer Impendance Coefficients, CODE=3, Part 1 */
-
- BYTE IMFilterCoeff_1[8]; /* COP - IM Filter Coefficients, CODE=4, Part 1 */
-
- BYTE IMFilterCoeff_2[8]; /* COP - IM Filter Coefficients, CODE=5, Part 2 */
-
- BYTE RingerImpendance_2[8]; /* COP - Ringer Impendance Coefficients, CODE=6, Part 2 */
-
- BYTE FRRFilterCoeff[8]; /* COP - FRR Filter Coefficients, CODE=7 */
-
- BYTE FRXFilterCoeff[8]; /* COP - FRX Filter Coefficients, CODE=8 */
-
- BYTE ARFilterCoeff[4]; /* COP - AR Filter Coefficients, CODE=9 */
-
- BYTE AXFilterCoeff[4]; /* COP - AX Filter Coefficients, CODE=10 */
-
- BYTE Tone1Coeff[4]; /* COP - Tone1 Coefficients, CODE=11 */
-
- BYTE Tone2Coeff[4]; /* COP - Tone2 Coefficients, CODE=12 */
-
- BYTE LevelmeteringRinging[4]; /* COP - Levelmetering Ringing, CODE=13 */
-
- BYTE CallerID1stTone[8]; /* COP - Caller ID 1st Tone, CODE=14 */
-
- BYTE CallerID2ndTone[8]; /* COP - Caller ID 2nd Tone, CODE=15 */
-
- } COP;
-
- BYTE ByteRegs[sizeof(struct _COP)];
-
- } COP_REGS;
-
- /* DAA_REGS.COP_REGS.COP.XR7.Tone1Coeff[3] */
- /* DAA_REGS.COP_REGS.COP.XR7.bitreg */
- /* DAA_REGS.COP_REGS.COP.XR7.bitreg.Vdd0 */
- /* DAA_REGS.COP_REGS.ByteRegs[57] */
-
- /*----------------------------------------------- */
- /* CAO Registers */
- /* */
- BYTE byCAO;
-
- union _CAO_REGS {
- struct _CAO {
- BYTE CallerID[512]; /* CAO - Caller ID Bytes */
-
- } CAO;
-
- BYTE ByteRegs[sizeof(struct _CAO)];
- } CAO_REGS;
-
- union /* XOP - XR0 Register - Write values */
- {
- BYTE reg;
- struct _XR0_BITREGSW {
- BYTE SO_0:1; /* XR1[0:0] - Write */
-
- BYTE SO_1:1; /* XR1[1:1] - Write */
-
- BYTE SO_2:1; /* XR1[2:2] - Write */
-
- BYTE unused:5; /* XR1[3:7] - Write */
-
- } bitreg;
- } XOP_xr0_W;
-
- union /* XOP - XR6 Register - Write values */
- {
- BYTE reg;
- struct _XR6_BITREGSW {
- BYTE unused1:4; /* XR6[0:3] */
-
- BYTE CLK_OFF:1; /* XR6[4:4] */
-
- BYTE unused2:3; /* XR6[5:7] */
-
- } bitreg;
- } XOP_xr6_W;
-
-} DAA_REGS;
-
-#define ALISDAA_ID_BYTE 0x81
-#define ALISDAA_CALLERID_SIZE 512
-
-/*------------------------------ */
-/* */
-/* Misc definitions */
-/* */
-
-/* Power Up Operation */
-#define SOP_PU_SLEEP 0
-#define SOP_PU_RINGING 1
-#define SOP_PU_CONVERSATION 2
-#define SOP_PU_PULSEDIALING 3
-#define SOP_PU_RESET 4
-
-#define ALISDAA_CALLERID_SIZE 512
-
-#define PLAYBACK_MODE_COMPRESSED 0 /* Selects: Compressed modes, TrueSpeech 8.5-4.1, G.723.1, G.722, G.728, G.729 */
-#define PLAYBACK_MODE_TRUESPEECH_V40 0 /* Selects: TrueSpeech 8.5, 6.3, 5.3, 4.8 or 4.1 Kbps */
-#define PLAYBACK_MODE_TRUESPEECH 8 /* Selects: TrueSpeech 8.5, 6.3, 5.3, 4.8 or 4.1 Kbps Version 5.1 */
-#define PLAYBACK_MODE_ULAW 2 /* Selects: 64 Kbit/sec MuA-law PCM */
-#define PLAYBACK_MODE_ALAW 10 /* Selects: 64 Kbit/sec A-law PCM */
-#define PLAYBACK_MODE_16LINEAR 6 /* Selects: 128 Kbit/sec 16-bit linear */
-#define PLAYBACK_MODE_8LINEAR 4 /* Selects: 64 Kbit/sec 8-bit signed linear */
-#define PLAYBACK_MODE_8LINEAR_WSS 5 /* Selects: 64 Kbit/sec WSS 8-bit unsigned linear */
-
-#define RECORD_MODE_COMPRESSED 0 /* Selects: Compressed modes, TrueSpeech 8.5-4.1, G.723.1, G.722, G.728, G.729 */
-#define RECORD_MODE_TRUESPEECH 0 /* Selects: TrueSpeech 8.5, 6.3, 5.3, 4.8 or 4.1 Kbps */
-#define RECORD_MODE_ULAW 4 /* Selects: 64 Kbit/sec Mu-law PCM */
-#define RECORD_MODE_ALAW 12 /* Selects: 64 Kbit/sec A-law PCM */
-#define RECORD_MODE_16LINEAR 5 /* Selects: 128 Kbit/sec 16-bit linear */
-#define RECORD_MODE_8LINEAR 6 /* Selects: 64 Kbit/sec 8-bit signed linear */
-#define RECORD_MODE_8LINEAR_WSS 7 /* Selects: 64 Kbit/sec WSS 8-bit unsigned linear */
-
-enum SLIC_STATES {
- PLD_SLIC_STATE_OC = 0,
- PLD_SLIC_STATE_RINGING,
- PLD_SLIC_STATE_ACTIVE,
- PLD_SLIC_STATE_OHT,
- PLD_SLIC_STATE_TIPOPEN,
- PLD_SLIC_STATE_STANDBY,
- PLD_SLIC_STATE_APR,
- PLD_SLIC_STATE_OHTPR
-};
-
-enum SCI_CONTROL {
- SCI_End = 0,
- SCI_Enable_DAA,
- SCI_Enable_Mixer,
- SCI_Enable_EEPROM
-};
-
-enum Mode {
- T63, T53, T48, T40
-};
-enum Dir {
- V3_TO_V4, V4_TO_V3, V4_TO_V5, V5_TO_V4
-};
-
-typedef struct Proc_Info_Tag {
- enum Mode convert_mode;
- enum Dir convert_dir;
- int Prev_Frame_Type;
- int Current_Frame_Type;
-} Proc_Info_Type;
-
-enum PREVAL {
- NORMAL = 0,
- NOPOST,
- POSTONLY,
- PREERROR
-};
-
-enum IXJ_EXTENSIONS {
- G729LOADER = 0,
- TS85LOADER,
- PRE_READ,
- POST_READ,
- PRE_WRITE,
- POST_WRITE,
- PRE_IOCTL,
- POST_IOCTL
-};
-
-typedef struct {
- char enable;
- char en_filter;
- unsigned int filter;
- unsigned int state; /* State 0 when cadence has not started. */
-
- unsigned int on1; /* State 1 */
-
- unsigned long on1min; /* State 1 - 10% + jiffies */
- unsigned long on1dot; /* State 1 + jiffies */
-
- unsigned long on1max; /* State 1 + 10% + jiffies */
-
- unsigned int off1; /* State 2 */
-
- unsigned long off1min;
- unsigned long off1dot; /* State 2 + jiffies */
- unsigned long off1max;
- unsigned int on2; /* State 3 */
-
- unsigned long on2min;
- unsigned long on2dot;
- unsigned long on2max;
- unsigned int off2; /* State 4 */
-
- unsigned long off2min;
- unsigned long off2dot; /* State 4 + jiffies */
- unsigned long off2max;
- unsigned int on3; /* State 5 */
-
- unsigned long on3min;
- unsigned long on3dot;
- unsigned long on3max;
- unsigned int off3; /* State 6 */
-
- unsigned long off3min;
- unsigned long off3dot; /* State 6 + jiffies */
- unsigned long off3max;
-} IXJ_CADENCE_F;
-
-typedef struct {
- unsigned int busytone:1;
- unsigned int dialtone:1;
- unsigned int ringback:1;
- unsigned int ringing:1;
- unsigned int playing:1;
- unsigned int recording:1;
- unsigned int cringing:1;
- unsigned int play_first_frame:1;
- unsigned int pstn_present:1;
- unsigned int pstn_ringing:1;
- unsigned int pots_correct:1;
- unsigned int pots_pstn:1;
- unsigned int g729_loaded:1;
- unsigned int ts85_loaded:1;
- unsigned int dtmf_oob:1; /* DTMF Out-Of-Band */
-
- unsigned int pcmciascp:1; /* SmartCABLE Present */
-
- unsigned int pcmciasct:2; /* SmartCABLE Type */
-
- unsigned int pcmciastate:3; /* SmartCABLE Init State */
-
- unsigned int inwrite:1; /* Currently writing */
-
- unsigned int inread:1; /* Currently reading */
-
- unsigned int incheck:1; /* Currently checking the SmartCABLE */
-
- unsigned int cidplay:1; /* Currently playing Caller ID */
-
- unsigned int cidring:1; /* This is the ring for Caller ID */
-
- unsigned int cidsent:1; /* Caller ID has been sent */
-
- unsigned int cidcw_ack:1; /* Caller ID CW ACK (from CPE) */
- unsigned int firstring:1; /* First ring cadence is complete */
- unsigned int pstncheck:1; /* Currently checking the PSTN Line */
- unsigned int pstn_rmr:1;
- unsigned int x:3; /* unused bits */
-
-} IXJ_FLAGS;
-
-/******************************************************************************
-*
-* This structure holds the state of all of the Quicknet cards
-*
-******************************************************************************/
-
-typedef struct {
- int elements_used;
- IXJ_CADENCE_TERM termination;
- IXJ_CADENCE_ELEMENT *ce;
-} ixj_cadence;
-
-typedef struct {
- struct phone_device p;
- struct timer_list timer;
- unsigned int board;
- unsigned int DSPbase;
- unsigned int XILINXbase;
- unsigned int serial;
- atomic_t DSPWrite;
- struct phone_capability caplist[30];
- unsigned int caps;
- struct pnp_dev *dev;
- unsigned int cardtype;
- unsigned int rec_codec;
- unsigned int cid_rec_codec;
- unsigned int cid_rec_volume;
- unsigned char cid_rec_flag;
- signed char rec_mode;
- unsigned int play_codec;
- unsigned int cid_play_codec;
- unsigned int cid_play_volume;
- unsigned char cid_play_flag;
- signed char play_mode;
- IXJ_FLAGS flags;
- unsigned long busyflags;
- unsigned int rec_frame_size;
- unsigned int play_frame_size;
- unsigned int cid_play_frame_size;
- unsigned int cid_base_frame_size;
- unsigned long cidcw_wait;
- int aec_level;
- int cid_play_aec_level;
- int readers, writers;
- wait_queue_head_t poll_q;
- wait_queue_head_t read_q;
- char *read_buffer, *read_buffer_end;
- char *read_convert_buffer;
- size_t read_buffer_size;
- unsigned int read_buffer_ready;
- wait_queue_head_t write_q;
- char *write_buffer, *write_buffer_end;
- char *write_convert_buffer;
- size_t write_buffer_size;
- unsigned int write_buffers_empty;
- unsigned long drybuffer;
- char *write_buffer_rp, *write_buffer_wp;
- char dtmfbuffer[80];
- char dtmf_current;
- int dtmf_wp, dtmf_rp, dtmf_state, dtmf_proc;
- int tone_off_time, tone_on_time;
- struct fasync_struct *async_queue;
- unsigned long tone_start_jif;
- char tone_index;
- char tone_state;
- char maxrings;
- ixj_cadence *cadence_t;
- ixj_cadence *cadence_r;
- int tone_cadence_state;
- IXJ_CADENCE_F cadence_f[6];
- DTMF dtmf;
- CPTF cptf;
- BYTES dsp;
- BYTES ver;
- BYTES scr;
- BYTES ssr;
- BYTES baseframe;
- HSR hsr;
- GPIO gpio;
- PLD_SCRR pld_scrr;
- PLD_SCRW pld_scrw;
- PLD_SLICW pld_slicw;
- PLD_SLICR pld_slicr;
- PLD_CLOCK pld_clock;
- PCMCIA_CR1 pccr1;
- PCMCIA_CR2 pccr2;
- PCMCIA_SCCR psccr;
- PCMCIA_SLIC pslic;
- char pscdd;
- Si3C1 sic1;
- Si3C2 sic2;
- Si3RXG sirxg;
- Si3ADC siadc;
- Si3DAC sidac;
- Si3STAT sistat;
- Si3AATT siaatt;
- MIX mix;
- unsigned short ring_cadence;
- int ring_cadence_t;
- unsigned long ring_cadence_jif;
- unsigned long checkwait;
- int intercom;
- int m_hook;
- int r_hook;
- int p_hook;
- char pstn_envelope;
- char pstn_cid_intr;
- unsigned char fskz;
- unsigned char fskphase;
- unsigned char fskcnt;
- unsigned int cidsize;
- unsigned int cidcnt;
- unsigned long pstn_cid_received;
- PHONE_CID cid;
- PHONE_CID cid_send;
- unsigned long pstn_ring_int;
- unsigned long pstn_ring_start;
- unsigned long pstn_ring_stop;
- unsigned long pstn_winkstart;
- unsigned long pstn_last_rmr;
- unsigned long pstn_prev_rmr;
- unsigned long pots_winkstart;
- unsigned int winktime;
- unsigned long flash_end;
- char port;
- char hookstate;
- union telephony_exception ex;
- union telephony_exception ex_sig;
- int ixj_signals[35];
- IXJ_SIGDEF sigdef;
- char daa_mode;
- char daa_country;
- unsigned long pstn_sleeptil;
- DAA_REGS m_DAAShadowRegs;
- Proc_Info_Type Info_read;
- Proc_Info_Type Info_write;
- unsigned short frame_count;
- unsigned int filter_hist[4];
- unsigned char filter_en[6];
- unsigned short proc_load;
- unsigned long framesread;
- unsigned long frameswritten;
- unsigned long read_wait;
- unsigned long write_wait;
- unsigned long timerchecks;
- unsigned long txreadycheck;
- unsigned long rxreadycheck;
- unsigned long statuswait;
- unsigned long statuswaitfail;
- unsigned long pcontrolwait;
- unsigned long pcontrolwaitfail;
- unsigned long iscontrolready;
- unsigned long iscontrolreadyfail;
- unsigned long pstnstatecheck;
-#ifdef IXJ_DYN_ALLOC
- short *fskdata;
-#else
- short fskdata[8000];
-#endif
- int fsksize;
- int fskdcnt;
-} IXJ;
-
-typedef int (*IXJ_REGFUNC) (IXJ * j, unsigned long arg);
-
-extern IXJ *ixj_pcmcia_probe(unsigned long, unsigned long);
-
diff --git a/drivers/staging/telephony/ixj_pcmcia.c b/drivers/staging/telephony/ixj_pcmcia.c
deleted file mode 100644
index 05032e2..0000000
--- a/drivers/staging/telephony/ixj_pcmcia.c
+++ /dev/null
@@ -1,187 +0,0 @@
-#include "ixj-ver.h"
-
-#include <linux/module.h>
-
-#include <linux/init.h>
-#include <linux/kernel.h> /* printk() */
-#include <linux/fs.h> /* everything... */
-#include <linux/errno.h> /* error codes */
-#include <linux/slab.h>
-
-#include <pcmcia/cistpl.h>
-#include <pcmcia/ds.h>
-
-#include "ixj.h"
-
-/*
- * PCMCIA service support for Quicknet cards
- */
-
-
-typedef struct ixj_info_t {
- int ndev;
- struct ixj *port;
-} ixj_info_t;
-
-static void ixj_detach(struct pcmcia_device *p_dev);
-static int ixj_config(struct pcmcia_device * link);
-static void ixj_cs_release(struct pcmcia_device * link);
-
-static int ixj_probe(struct pcmcia_device *p_dev)
-{
- dev_dbg(&p_dev->dev, "ixj_attach()\n");
- /* Create new ixj device */
- p_dev->priv = kzalloc(sizeof(struct ixj_info_t), GFP_KERNEL);
- if (!p_dev->priv) {
- return -ENOMEM;
- }
-
- return ixj_config(p_dev);
-}
-
-static void ixj_detach(struct pcmcia_device *link)
-{
- dev_dbg(&link->dev, "ixj_detach\n");
-
- ixj_cs_release(link);
-
- kfree(link->priv);
-}
-
-static void ixj_get_serial(struct pcmcia_device * link, IXJ * j)
-{
- char *str;
- int i, place;
- dev_dbg(&link->dev, "ixj_get_serial\n");
-
- str = link->prod_id[0];
- if (!str)
- goto failed;
- printk("%s", str);
- str = link->prod_id[1];
- if (!str)
- goto failed;
- printk(" %s", str);
- str = link->prod_id[2];
- if (!str)
- goto failed;
- place = 1;
- for (i = strlen(str) - 1; i >= 0; i--) {
- switch (str[i]) {
- case '0':
- case '1':
- case '2':
- case '3':
- case '4':
- case '5':
- case '6':
- case '7':
- case '8':
- case '9':
- j->serial += (str[i] - 48) * place;
- break;
- case 'A':
- case 'B':
- case 'C':
- case 'D':
- case 'E':
- case 'F':
- j->serial += (str[i] - 55) * place;
- break;
- case 'a':
- case 'b':
- case 'c':
- case 'd':
- case 'e':
- case 'f':
- j->serial += (str[i] - 87) * place;
- break;
- }
- place = place * 0x10;
- }
- str = link->prod_id[3];
- if (!str)
- goto failed;
- printk(" version %s\n", str);
-failed:
- return;
-}
-
-static int ixj_config_check(struct pcmcia_device *p_dev, void *priv_data)
-{
- p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
- p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
- p_dev->resource[1]->flags &= ~IO_DATA_PATH_WIDTH;
- p_dev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
- p_dev->io_lines = 3;
-
- return pcmcia_request_io(p_dev);
-}
-
-static int ixj_config(struct pcmcia_device * link)
-{
- IXJ *j;
- ixj_info_t *info;
-
- info = link->priv;
- dev_dbg(&link->dev, "ixj_config\n");
-
- link->config_flags = CONF_AUTO_SET_IO;
-
- if (pcmcia_loop_config(link, ixj_config_check, NULL))
- goto failed;
-
- if (pcmcia_enable_device(link))
- goto failed;
-
- /*
- * Register the card with the core.
- */
- j = ixj_pcmcia_probe(link->resource[0]->start,
- link->resource[0]->start + 0x10);
-
- info->ndev = 1;
- ixj_get_serial(link, j);
- return 0;
-
-failed:
- ixj_cs_release(link);
- return -ENODEV;
-}
-
-static void ixj_cs_release(struct pcmcia_device *link)
-{
- ixj_info_t *info = link->priv;
- dev_dbg(&link->dev, "ixj_cs_release\n");
- info->ndev = 0;
- pcmcia_disable_device(link);
-}
-
-static const struct pcmcia_device_id ixj_ids[] = {
- PCMCIA_DEVICE_MANF_CARD(0x0257, 0x0600),
- PCMCIA_DEVICE_NULL
-};
-MODULE_DEVICE_TABLE(pcmcia, ixj_ids);
-
-static struct pcmcia_driver ixj_driver = {
- .owner = THIS_MODULE,
- .name = "ixj_cs",
- .probe = ixj_probe,
- .remove = ixj_detach,
- .id_table = ixj_ids,
-};
-
-static int __init ixj_pcmcia_init(void)
-{
- return pcmcia_register_driver(&ixj_driver);
-}
-
-static void ixj_pcmcia_exit(void)
-{
- pcmcia_unregister_driver(&ixj_driver);
-}
-
-module_init(ixj_pcmcia_init);
-module_exit(ixj_pcmcia_exit);
-
-MODULE_LICENSE("GPL");
diff --git a/drivers/staging/telephony/phonedev.c b/drivers/staging/telephony/phonedev.c
deleted file mode 100644
index 1dd0b67..0000000
--- a/drivers/staging/telephony/phonedev.c
+++ /dev/null
@@ -1,166 +0,0 @@
-/*
- * Telephony registration for Linux
- *
- * (c) Copyright 1999 Red Hat Software Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- * Author: Alan Cox, <alan@lxorguk.ukuu.org.uk>
- *
- * Fixes: Mar 01 2000 Thomas Sparr, <thomas.l.sparr@telia.com>
- * phone_register_device now works with unit!=PHONE_UNIT_ANY
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/fs.h>
-#include <linux/mm.h>
-#include <linux/string.h>
-#include <linux/errno.h>
-#include <linux/phonedev.h>
-#include <linux/init.h>
-#include <asm/uaccess.h>
-
-#include <linux/kmod.h>
-#include <linux/sem.h>
-#include <linux/mutex.h>
-
-#define PHONE_NUM_DEVICES 256
-
-/*
- * Active devices
- */
-
-static struct phone_device *phone_device[PHONE_NUM_DEVICES];
-static DEFINE_MUTEX(phone_lock);
-
-/*
- * Open a phone device.
- */
-
-static int phone_open(struct inode *inode, struct file *file)
-{
- unsigned int minor = iminor(inode);
- int err = 0;
- struct phone_device *p;
- const struct file_operations *old_fops, *new_fops = NULL;
-
- if (minor >= PHONE_NUM_DEVICES)
- return -ENODEV;
-
- mutex_lock(&phone_lock);
- p = phone_device[minor];
- if (p)
- new_fops = fops_get(p->f_op);
- if (!new_fops) {
- mutex_unlock(&phone_lock);
- request_module("char-major-%d-%d", PHONE_MAJOR, minor);
- mutex_lock(&phone_lock);
- p = phone_device[minor];
- if (p == NULL || (new_fops = fops_get(p->f_op)) == NULL)
- {
- err=-ENODEV;
- goto end;
- }
- }
- old_fops = file->f_op;
- file->f_op = new_fops;
- if (p->open)
- err = p->open(p, file); /* Tell the device it is open */
- if (err) {
- fops_put(file->f_op);
- file->f_op = fops_get(old_fops);
- }
- fops_put(old_fops);
-end:
- mutex_unlock(&phone_lock);
- return err;
-}
-
-/*
- * Telephony For Linux device drivers request registration here.
- */
-
-int phone_register_device(struct phone_device *p, int unit)
-{
- int base;
- int end;
- int i;
-
- base = 0;
- end = PHONE_NUM_DEVICES - 1;
-
- if (unit != PHONE_UNIT_ANY) {
- base = unit;
- end = unit + 1; /* enter the loop at least one time */
- }
-
- mutex_lock(&phone_lock);
- for (i = base; i < end; i++) {
- if (phone_device[i] == NULL) {
- phone_device[i] = p;
- p->minor = i;
- mutex_unlock(&phone_lock);
- return 0;
- }
- }
- mutex_unlock(&phone_lock);
- return -ENFILE;
-}
-
-/*
- * Unregister an unused Telephony for linux device
- */
-
-void phone_unregister_device(struct phone_device *pfd)
-{
- mutex_lock(&phone_lock);
- if (likely(phone_device[pfd->minor] == pfd))
- phone_device[pfd->minor] = NULL;
- mutex_unlock(&phone_lock);
-}
-
-
-static const struct file_operations phone_fops =
-{
- .owner = THIS_MODULE,
- .open = phone_open,
- .llseek = noop_llseek,
-};
-
-/*
- * Board init functions
- */
-
-
-/*
- * Initialise Telephony for linux
- */
-
-static int __init telephony_init(void)
-{
- printk(KERN_INFO "Linux telephony interface: v1.00\n");
- if (register_chrdev(PHONE_MAJOR, "telephony", &phone_fops)) {
- printk("phonedev: unable to get major %d\n", PHONE_MAJOR);
- return -EIO;
- }
-
- return 0;
-}
-
-static void __exit telephony_exit(void)
-{
- unregister_chrdev(PHONE_MAJOR, "telephony");
-}
-
-module_init(telephony_init);
-module_exit(telephony_exit);
-
-MODULE_LICENSE("GPL");
-
-EXPORT_SYMBOL(phone_register_device);
-EXPORT_SYMBOL(phone_unregister_device);
diff --git a/drivers/staging/tidspbridge/dynload/dload_internal.h b/drivers/staging/tidspbridge/dynload/dload_internal.h
index 7b77573..b9d079b 100644
--- a/drivers/staging/tidspbridge/dynload/dload_internal.h
+++ b/drivers/staging/tidspbridge/dynload/dload_internal.h
@@ -313,14 +313,14 @@
/*
* exported by reloc.c
*/
-extern void dload_relocate(struct dload_state *dlthis, tgt_au_t * data,
- struct reloc_record_t *rp, bool * tramps_generated,
+extern void dload_relocate(struct dload_state *dlthis, tgt_au_t *data,
+ struct reloc_record_t *rp, bool *tramps_generated,
bool second_pass);
-extern rvalue dload_unpack(struct dload_state *dlthis, tgt_au_t * data,
+extern rvalue dload_unpack(struct dload_state *dlthis, tgt_au_t *data,
int fieldsz, int offset, unsigned sgn);
-extern int dload_repack(struct dload_state *dlthis, rvalue val, tgt_au_t * data,
+extern int dload_repack(struct dload_state *dlthis, rvalue val, tgt_au_t *data,
int fieldsz, int offset, unsigned sgn);
/*
diff --git a/drivers/staging/tidspbridge/dynload/reloc.c b/drivers/staging/tidspbridge/dynload/reloc.c
index 7b28c07..463abdb 100644
--- a/drivers/staging/tidspbridge/dynload/reloc.c
+++ b/drivers/staging/tidspbridge/dynload/reloc.c
@@ -45,7 +45,7 @@
* Effect:
* Extracts the specified field and returns it.
************************************************************************* */
-rvalue dload_unpack(struct dload_state *dlthis, tgt_au_t * data, int fieldsz,
+rvalue dload_unpack(struct dload_state *dlthis, tgt_au_t *data, int fieldsz,
int offset, unsigned sgn)
{
register rvalue objval;
@@ -98,7 +98,7 @@
************************************************************************* */
static const unsigned char ovf_limit[] = { 1, 2, 2 };
-int dload_repack(struct dload_state *dlthis, rvalue val, tgt_au_t * data,
+int dload_repack(struct dload_state *dlthis, rvalue val, tgt_au_t *data,
int fieldsz, int offset, unsigned sgn)
{
register urvalue objval, mask;
@@ -161,7 +161,7 @@
* Effect:
* Performs the specified relocation operation
************************************************************************* */
-void dload_relocate(struct dload_state *dlthis, tgt_au_t * data,
+void dload_relocate(struct dload_state *dlthis, tgt_au_t *data,
struct reloc_record_t *rp, bool *tramps_generated,
bool second_pass)
{
diff --git a/drivers/staging/tidspbridge/rmgr/drv_interface.c b/drivers/staging/tidspbridge/rmgr/drv_interface.c
index 701a11a..e6f31d8 100644
--- a/drivers/staging/tidspbridge/rmgr/drv_interface.c
+++ b/drivers/staging/tidspbridge/rmgr/drv_interface.c
@@ -471,7 +471,7 @@
return err;
}
-static int __devinit omap34_xx_bridge_probe(struct platform_device *pdev)
+static int omap34_xx_bridge_probe(struct platform_device *pdev)
{
int err;
dev_t dev = 0;
@@ -527,7 +527,7 @@
return err;
}
-static int __devexit omap34_xx_bridge_remove(struct platform_device *pdev)
+static int omap34_xx_bridge_remove(struct platform_device *pdev)
{
dev_t devno;
int status = 0;
@@ -606,7 +606,7 @@
.name = "omap-dsp",
},
.probe = omap34_xx_bridge_probe,
- .remove = __devexit_p(omap34_xx_bridge_remove),
+ .remove = omap34_xx_bridge_remove,
#ifdef CONFIG_PM
.suspend = bridge_suspend,
.resume = bridge_resume,
diff --git a/drivers/staging/usbip/stub_dev.c b/drivers/staging/usbip/stub_dev.c
index c8d79a7..ee36415 100644
--- a/drivers/staging/usbip/stub_dev.c
+++ b/drivers/staging/usbip/stub_dev.c
@@ -18,6 +18,7 @@
*/
#include <linux/device.h>
+#include <linux/file.h>
#include <linux/kthread.h>
#include <linux/module.h>
@@ -203,7 +204,7 @@
* not touch NULL socket.
*/
if (ud->tcp_socket) {
- sock_release(ud->tcp_socket);
+ fput(ud->tcp_socket->file);
ud->tcp_socket = NULL;
}
@@ -432,6 +433,8 @@
dev_err(&interface->dev, "stub_add_files for %s\n", udev_busid);
usb_set_intfdata(interface, NULL);
usb_put_intf(interface);
+ usb_put_dev(udev);
+ kthread_stop_put(sdev->ud.eh);
busid_priv->interf_count = 0;
busid_priv->sdev = NULL;
@@ -477,19 +480,17 @@
/* get stub_device */
if (!sdev) {
dev_err(&interface->dev, "could not get device");
- /* BUG(); */
return;
}
usb_set_intfdata(interface, NULL);
/*
- * NOTE:
- * rx/tx threads are invoked for each usb_device.
+ * NOTE: rx/tx threads are invoked for each usb_device.
*/
stub_remove_files(&interface->dev);
- /*If usb reset called from event handler*/
+ /* If usb reset is called from event handler */
if (busid_priv->sdev->ud.eh == current) {
busid_priv->interf_count--;
return;
@@ -504,13 +505,13 @@
busid_priv->interf_count = 0;
- /* 1. shutdown the current connection */
+ /* shutdown the current connection */
shutdown_busid(busid_priv);
usb_put_dev(sdev->udev);
usb_put_intf(interface);
- /* 3. free sdev */
+ /* free sdev */
busid_priv->sdev = NULL;
stub_device_free(sdev);
diff --git a/drivers/staging/usbip/stub_rx.c b/drivers/staging/usbip/stub_rx.c
index 694cfd7..0572a15 100644
--- a/drivers/staging/usbip/stub_rx.c
+++ b/drivers/staging/usbip/stub_rx.c
@@ -164,7 +164,6 @@
config, dev_name(&urb->dev->dev));
return 0;
- /* return usb_driver_set_configuration(urb->dev, config); */
}
static int tweak_reset_device_cmd(struct urb *urb)
@@ -480,7 +479,7 @@
return;
}
- /* set priv->urb->transfer_buffer */
+ /* allocate urb transfer buffer, if needed */
if (pdu->u.cmd_submit.transfer_buffer_length > 0) {
priv->urb->transfer_buffer =
kzalloc(pdu->u.cmd_submit.transfer_buffer_length,
@@ -492,7 +491,7 @@
}
}
- /* set priv->urb->setup_packet */
+ /* copy urb setup packet */
priv->urb->setup_packet = kmemdup(&pdu->u.cmd_submit.setup, 8,
GFP_KERNEL);
if (!priv->urb->setup_packet) {
diff --git a/drivers/staging/usbip/stub_tx.c b/drivers/staging/usbip/stub_tx.c
index 023fda3..513961f 100644
--- a/drivers/staging/usbip/stub_tx.c
+++ b/drivers/staging/usbip/stub_tx.c
@@ -166,7 +166,7 @@
int ret;
struct urb *urb = priv->urb;
struct usbip_header pdu_header;
- void *iso_buffer = NULL;
+ struct usbip_iso_packet_descriptor *iso_buffer = NULL;
struct kvec *iov = NULL;
int iovnum = 0;
@@ -192,7 +192,6 @@
setup_ret_submit_pdu(&pdu_header, urb);
usbip_dbg_stub_tx("setup txdata seqnum: %d urb: %p\n",
pdu_header.base.seqnum, urb);
- /*usbip_dump_header(pdu_header);*/
usbip_header_correct_endian(&pdu_header, 1);
iov[iovnum].iov_base = &pdu_header;
diff --git a/drivers/staging/usbip/usbip_common.c b/drivers/staging/usbip/usbip_common.c
index 57f11f9..75189fe 100644
--- a/drivers/staging/usbip/usbip_common.c
+++ b/drivers/staging/usbip/usbip_common.c
@@ -413,8 +413,10 @@
inode = file->f_dentry->d_inode;
- if (!inode || !S_ISSOCK(inode->i_mode))
+ if (!inode || !S_ISSOCK(inode->i_mode)) {
+ fput(file);
return NULL;
+ }
socket = SOCKET_I(inode);
@@ -439,7 +441,6 @@
* will be discussed when usbip is ported to other operating systems.
*/
if (pack) {
- /* vhci_tx.c */
spdu->transfer_flags =
tweak_transfer_flags(urb->transfer_flags);
spdu->transfer_buffer_length = urb->transfer_buffer_length;
@@ -447,9 +448,7 @@
spdu->number_of_packets = urb->number_of_packets;
spdu->interval = urb->interval;
} else {
- /* stub_rx.c */
urb->transfer_flags = spdu->transfer_flags;
-
urb->transfer_buffer_length = spdu->transfer_buffer_length;
urb->start_frame = spdu->start_frame;
urb->number_of_packets = spdu->number_of_packets;
@@ -463,16 +462,12 @@
struct usbip_header_ret_submit *rpdu = &pdu->u.ret_submit;
if (pack) {
- /* stub_tx.c */
-
rpdu->status = urb->status;
rpdu->actual_length = urb->actual_length;
rpdu->start_frame = urb->start_frame;
rpdu->number_of_packets = urb->number_of_packets;
rpdu->error_count = urb->error_count;
} else {
- /* vhci_rx.c */
-
urb->status = rpdu->status;
urb->actual_length = rpdu->actual_length;
urb->start_frame = rpdu->start_frame;
@@ -639,28 +634,26 @@
}
/* must free buffer */
-void *usbip_alloc_iso_desc_pdu(struct urb *urb, ssize_t *bufflen)
+struct usbip_iso_packet_descriptor*
+usbip_alloc_iso_desc_pdu(struct urb *urb, ssize_t *bufflen)
{
- void *buff;
struct usbip_iso_packet_descriptor *iso;
int np = urb->number_of_packets;
ssize_t size = np * sizeof(*iso);
int i;
- buff = kzalloc(size, GFP_KERNEL);
- if (!buff)
+ iso = kzalloc(size, GFP_KERNEL);
+ if (!iso)
return NULL;
for (i = 0; i < np; i++) {
- iso = buff + (i * sizeof(*iso));
-
- usbip_pack_iso(iso, &urb->iso_frame_desc[i], 1);
- usbip_iso_packet_correct_endian(iso, 1);
+ usbip_pack_iso(&iso[i], &urb->iso_frame_desc[i], 1);
+ usbip_iso_packet_correct_endian(&iso[i], 1);
}
*bufflen = size;
- return buff;
+ return iso;
}
EXPORT_SYMBOL_GPL(usbip_alloc_iso_desc_pdu);
@@ -680,8 +673,6 @@
/* my Bluetooth dongle gets ISO URBs which are np = 0 */
if (np == 0) {
- /* pr_info("iso np == 0\n"); */
- /* usbip_dump_urb(urb); */
return 0;
}
@@ -703,11 +694,10 @@
return -EPIPE;
}
+ iso = (struct usbip_iso_packet_descriptor *) buff;
for (i = 0; i < np; i++) {
- iso = buff + (i * sizeof(*iso));
-
- usbip_iso_packet_correct_endian(iso, 0);
- usbip_pack_iso(iso, &urb->iso_frame_desc[i], 0);
+ usbip_iso_packet_correct_endian(&iso[i], 0);
+ usbip_pack_iso(&iso[i], &urb->iso_frame_desc[i], 0);
total_length += urb->iso_frame_desc[i].actual_length;
}
@@ -754,7 +744,7 @@
/*
* if actual_length is transfer_buffer_length then no padding is
* present.
- */
+ */
if (urb->actual_length == urb->transfer_buffer_length)
return;
@@ -778,14 +768,12 @@
int size;
if (ud->side == USBIP_STUB) {
- /* stub_rx.c */
/* the direction of urb must be OUT. */
if (usb_pipein(urb->pipe))
return 0;
size = urb->transfer_buffer_length;
} else {
- /* vhci_rx.c */
/* the direction of urb must be IN. */
if (usb_pipeout(urb->pipe))
return 0;
diff --git a/drivers/staging/usbip/usbip_common.h b/drivers/staging/usbip/usbip_common.h
index 5d89c0f..7e6c543 100644
--- a/drivers/staging/usbip/usbip_common.h
+++ b/drivers/staging/usbip/usbip_common.h
@@ -320,7 +320,9 @@
int pack);
void usbip_header_correct_endian(struct usbip_header *pdu, int send);
-void *usbip_alloc_iso_desc_pdu(struct urb *urb, ssize_t *bufflen);
+struct usbip_iso_packet_descriptor*
+usbip_alloc_iso_desc_pdu(struct urb *urb, ssize_t *bufflen);
+
/* some members of urb must be substituted before. */
int usbip_recv_iso(struct usbip_device *ud, struct urb *urb);
void usbip_pad_iso(struct usbip_device *ud, struct urb *urb);
diff --git a/drivers/staging/usbip/userspace/src/usbip_detach.c b/drivers/staging/usbip/userspace/src/usbip_detach.c
index 89bf3c1..dac5f06 100644
--- a/drivers/staging/usbip/userspace/src/usbip_detach.c
+++ b/drivers/staging/usbip/userspace/src/usbip_detach.c
@@ -19,6 +19,7 @@
#include <sysfs/libsysfs.h>
#include <ctype.h>
+#include <limits.h>
#include <stdint.h>
#include <stdio.h>
#include <stdlib.h>
@@ -46,6 +47,7 @@
{
int ret;
uint8_t portnum;
+ char path[PATH_MAX+1];
for (unsigned int i=0; i < strlen(port); i++)
if (!isdigit(port[i])) {
@@ -57,6 +59,13 @@
portnum = atoi(port);
+ /* remove the port state file */
+
+ snprintf(path, PATH_MAX, VHCI_STATE_PATH"/port%d", portnum);
+
+ remove(path);
+ rmdir(VHCI_STATE_PATH);
+
ret = usbip_vhci_driver_open();
if (ret < 0) {
err("open vhci_driver");
diff --git a/drivers/staging/usbip/vhci.h b/drivers/staging/usbip/vhci.h
index c66b8b3..5dddc4d 100644
--- a/drivers/staging/usbip/vhci.h
+++ b/drivers/staging/usbip/vhci.h
@@ -99,7 +99,6 @@
/* vhci_hcd.c */
void rh_port_connect(int rhport, enum usb_device_speed speed);
-void rh_port_disconnect(int rhport);
/* vhci_rx.c */
struct urb *pickup_urb_and_free_priv(struct vhci_device *vdev, __u32 seqnum);
diff --git a/drivers/staging/usbip/vhci_hcd.c b/drivers/staging/usbip/vhci_hcd.c
index 620d1be..c3aa219 100644
--- a/drivers/staging/usbip/vhci_hcd.c
+++ b/drivers/staging/usbip/vhci_hcd.c
@@ -18,6 +18,7 @@
*/
#include <linux/init.h>
+#include <linux/file.h>
#include <linux/kernel.h>
#include <linux/kthread.h>
#include <linux/module.h>
@@ -140,32 +141,23 @@
break;
}
- /* spin_lock(&the_controller->vdev[rhport].ud.lock);
- * the_controller->vdev[rhport].ud.status = VDEV_CONNECT;
- * spin_unlock(&the_controller->vdev[rhport].ud.lock); */
-
spin_unlock_irqrestore(&the_controller->lock, flags);
usb_hcd_poll_rh_status(vhci_to_hcd(the_controller));
}
-void rh_port_disconnect(int rhport)
+static void rh_port_disconnect(int rhport)
{
unsigned long flags;
usbip_dbg_vhci_rh("rh_port_disconnect %d\n", rhport);
spin_lock_irqsave(&the_controller->lock, flags);
- /* stop_activity(dum, driver); */
+
the_controller->port_status[rhport] &= ~USB_PORT_STAT_CONNECTION;
the_controller->port_status[rhport] |=
(1 << USB_PORT_FEAT_C_CONNECTION);
- /* not yet complete the disconnection
- * spin_lock(&vdev->ud.lock);
- * vdev->ud.status = VHC_ST_DISCONNECT;
- * spin_unlock(&vdev->ud.lock); */
-
spin_unlock_irqrestore(&the_controller->lock, flags);
usb_hcd_poll_rh_status(vhci_to_hcd(the_controller));
}
@@ -228,7 +220,6 @@
return changed ? retval : 0;
}
-/* See hub_configure in hub.c */
static inline void hub_descriptor(struct usb_hub_descriptor *desc)
{
memset(desc, 0, sizeof(*desc));
@@ -292,8 +283,6 @@
usbip_dbg_vhci_rh(" ClearPortFeature: "
"USB_PORT_FEAT_POWER\n");
dum->port_status[rhport] = 0;
- /* dum->address = 0; */
- /* dum->hdev = 0; */
dum->resuming = 0;
break;
case USB_PORT_FEAT_C_RESET:
@@ -333,11 +322,11 @@
retval = -EPIPE;
}
- /* we do no care of resume. */
+ /* we do not care about resume. */
/* whoever resets or resumes must GetPortStatus to
* complete it!!
- * */
+ */
if (dum->resuming && time_after(jiffies, dum->re_timeout)) {
dum->port_status[rhport] |=
(1 << USB_PORT_FEAT_C_SUSPEND);
@@ -345,11 +334,6 @@
~(1 << USB_PORT_FEAT_SUSPEND);
dum->resuming = 0;
dum->re_timeout = 0;
- /* if (dum->driver && dum->driver->resume) {
- * spin_unlock (&dum->lock);
- * dum->driver->resume (&dum->gadget);
- * spin_lock (&dum->lock);
- * } */
}
if ((dum->port_status[rhport] & (1 << USB_PORT_FEAT_RESET)) !=
@@ -411,9 +395,6 @@
default:
pr_err("default: no such request\n");
- /* dev_dbg (hardware,
- * "hub control req%04x v%04x i%04x l%d\n",
- * typeReq, wValue, wIndex, wLength); */
/* "protocol stall" on error */
retval = -EPIPE;
@@ -456,7 +437,6 @@
if (!vdev) {
pr_err("could not get virtual device");
- /* BUG(); */
return;
}
@@ -813,7 +793,7 @@
kernel_sock_shutdown(ud->tcp_socket, SHUT_RDWR);
}
- /* kill threads related to this sdev, if v.c. exists */
+ /* kill threads related to this sdev */
if (vdev->ud.tcp_rx) {
kthread_stop_put(vdev->ud.tcp_rx);
vdev->ud.tcp_rx = NULL;
@@ -825,8 +805,8 @@
pr_info("stop threads\n");
/* active connection is closed */
- if (vdev->ud.tcp_socket != NULL) {
- sock_release(vdev->ud.tcp_socket);
+ if (vdev->ud.tcp_socket) {
+ fput(vdev->ud.tcp_socket->file);
vdev->ud.tcp_socket = NULL;
}
pr_info("release socket\n");
@@ -872,7 +852,10 @@
usb_put_dev(vdev->udev);
vdev->udev = NULL;
- ud->tcp_socket = NULL;
+ if (ud->tcp_socket) {
+ fput(ud->tcp_socket->file);
+ ud->tcp_socket = NULL;
+ }
ud->status = VDEV_ST_NULL;
spin_unlock(&ud->lock);
@@ -928,7 +911,6 @@
spin_lock_init(&vhci->lock);
hcd->power_budget = 0; /* no limit */
- hcd->state = HC_STATE_RUNNING;
hcd->uses_new_polling = 1;
/* vhci_hcd is now ready to be controlled through sysfs */
@@ -976,8 +958,6 @@
dev_dbg(&hcd->self.root_hub->dev, "%s\n", __func__);
spin_lock_irq(&vhci->lock);
- /* vhci->rh_state = DUMMY_RH_SUSPENDED;
- * set_link_state(vhci); */
hcd->state = HC_STATE_SUSPENDED;
spin_unlock_irq(&vhci->lock);
@@ -995,10 +975,6 @@
if (!HCD_HW_ACCESSIBLE(hcd)) {
rc = -ESHUTDOWN;
} else {
- /* vhci->rh_state = DUMMY_RH_RUNNING;
- * set_link_state(vhci);
- * if (!list_empty(&vhci->urbp_list))
- * mod_timer(&vhci->timer, jiffies); */
hcd->state = HC_STATE_RUNNING;
}
spin_unlock_irq(&vhci->lock);
@@ -1151,7 +1127,7 @@
static struct platform_driver vhci_driver = {
.probe = vhci_hcd_probe,
- .remove = __devexit_p(vhci_hcd_remove),
+ .remove = vhci_hcd_remove,
.suspend = vhci_hcd_suspend,
.resume = vhci_hcd_resume,
.driver = {
@@ -1175,7 +1151,6 @@
.name = (char *) driver_name,
.id = -1,
.dev = {
- /* .driver = &vhci_driver, */
.release = the_pdev_release,
},
};
diff --git a/drivers/staging/usbip/vhci_rx.c b/drivers/staging/usbip/vhci_rx.c
index f0eaf04f..ba5f1c0 100644
--- a/drivers/staging/usbip/vhci_rx.c
+++ b/drivers/staging/usbip/vhci_rx.c
@@ -167,7 +167,7 @@
} else {
usbip_dbg_vhci_rx("now giveback urb %p\n", urb);
- /* If unlink is succeed, status is -ECONNRESET */
+ /* If unlink is successful, status is -ECONNRESET */
urb->status = pdu->u.ret_unlink.status;
pr_info("urb->status %d\n", urb->status);
diff --git a/drivers/staging/usbip/vhci_sysfs.c b/drivers/staging/usbip/vhci_sysfs.c
index 7ce9c2f..c66e9c0 100644
--- a/drivers/staging/usbip/vhci_sysfs.c
+++ b/drivers/staging/usbip/vhci_sysfs.c
@@ -18,6 +18,7 @@
*/
#include <linux/kthread.h>
+#include <linux/file.h>
#include <linux/net.h>
#include "usbip_common.h"
@@ -189,7 +190,8 @@
if (valid_args(rhport, speed) < 0)
return -EINVAL;
- /* check sockfd */
+ /* Extract socket from fd. */
+ /* The correct way to clean this up is to fput(socket->file). */
socket = sockfd_to_socket(sockfd);
if (!socket)
return -EINVAL;
@@ -206,6 +208,8 @@
spin_unlock(&vdev->ud.lock);
spin_unlock(&the_controller->lock);
+ fput(socket->file);
+
dev_err(dev, "port %d already used\n", rhport);
return -EINVAL;
}
diff --git a/drivers/staging/usbip/vhci_tx.c b/drivers/staging/usbip/vhci_tx.c
index 9b437e7..b1f0dcd 100644
--- a/drivers/staging/usbip/vhci_tx.c
+++ b/drivers/staging/usbip/vhci_tx.c
@@ -76,7 +76,7 @@
int ret;
struct urb *urb = priv->urb;
struct usbip_header pdu_header;
- void *iso_buffer = NULL;
+ struct usbip_iso_packet_descriptor *iso_buffer = NULL;
txsize = 0;
memset(&pdu_header, 0, sizeof(pdu_header));
diff --git a/drivers/staging/vme/devices/vme_pio2.h b/drivers/staging/vme/devices/vme_pio2.h
index 72d9ce0..d5d94c4 100644
--- a/drivers/staging/vme/devices/vme_pio2.h
+++ b/drivers/staging/vme/devices/vme_pio2.h
@@ -243,7 +243,7 @@
int pio2_cntr_reset(struct pio2_card *);
int pio2_gpio_reset(struct pio2_card *);
-int __devinit pio2_gpio_init(struct pio2_card *);
+int pio2_gpio_init(struct pio2_card *);
void pio2_gpio_exit(struct pio2_card *);
#endif /* _VME_PIO2_H_ */
diff --git a/drivers/staging/vme/devices/vme_pio2_core.c b/drivers/staging/vme/devices/vme_pio2_core.c
index dad8281..0331178 100644
--- a/drivers/staging/vme/devices/vme_pio2_core.c
+++ b/drivers/staging/vme/devices/vme_pio2_core.c
@@ -42,8 +42,8 @@
static bool loopback;
static int pio2_match(struct vme_dev *);
-static int __devinit pio2_probe(struct vme_dev *);
-static int __devexit pio2_remove(struct vme_dev *);
+static int pio2_probe(struct vme_dev *);
+static int pio2_remove(struct vme_dev *);
static int pio2_get_led(struct pio2_card *card)
{
@@ -156,7 +156,7 @@
.name = driver_name,
.match = pio2_match,
.probe = pio2_probe,
- .remove = __devexit_p(pio2_remove),
+ .remove = pio2_remove,
};
@@ -222,7 +222,7 @@
return 1;
}
-static int __devinit pio2_probe(struct vme_dev *vdev)
+static int pio2_probe(struct vme_dev *vdev)
{
struct pio2_card *card;
int retval;
@@ -455,7 +455,7 @@
return retval;
}
-static int __devexit pio2_remove(struct vme_dev *vdev)
+static int pio2_remove(struct vme_dev *vdev)
{
int vec;
int i;
diff --git a/drivers/staging/vme/devices/vme_pio2_gpio.c b/drivers/staging/vme/devices/vme_pio2_gpio.c
index ad76a47..69d8805 100644
--- a/drivers/staging/vme/devices/vme_pio2_gpio.c
+++ b/drivers/staging/vme/devices/vme_pio2_gpio.c
@@ -186,7 +186,7 @@
return 0;
}
-int __devinit pio2_gpio_init(struct pio2_card *card)
+int pio2_gpio_init(struct pio2_card *card)
{
int retval = 0;
char *label;
diff --git a/drivers/staging/vme/devices/vme_user.c b/drivers/staging/vme/devices/vme_user.c
index c3f94f3..4ef852c 100644
--- a/drivers/staging/vme/devices/vme_user.c
+++ b/drivers/staging/vme/devices/vme_user.c
@@ -15,6 +15,8 @@
* option) any later version.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/cdev.h>
#include <linux/delay.h>
#include <linux/device.h>
@@ -135,8 +137,8 @@
static long vme_user_unlocked_ioctl(struct file *, unsigned int, unsigned long);
static int vme_user_match(struct vme_dev *);
-static int __devinit vme_user_probe(struct vme_dev *);
-static int __devexit vme_user_remove(struct vme_dev *);
+static int vme_user_probe(struct vme_dev *);
+static int vme_user_remove(struct vme_dev *);
static const struct file_operations vme_user_fops = {
.open = vme_user_open,
@@ -170,7 +172,7 @@
mutex_lock(&image[minor].mutex);
/* Allow device to be opened if a resource is needed and allocated. */
if (minor < CONTROL_MINOR && image[minor].resource == NULL) {
- printk(KERN_ERR "No resources allocated for device\n");
+ pr_err("No resources allocated for device\n");
err = -EINVAL;
goto err_res;
}
@@ -225,13 +227,13 @@
(unsigned long)copied);
if (retval != 0) {
copied = (copied - retval);
- printk(KERN_INFO "User copy failed\n");
+ pr_info("User copy failed\n");
return -EINVAL;
}
} else {
/* XXX Need to write this */
- printk(KERN_INFO "Currently don't support large transfers\n");
+ pr_info("Currently don't support large transfers\n");
/* Map in pages from userspace */
/* Call vme_master_read to do the transfer */
@@ -265,7 +267,7 @@
image[minor].kern_buf, copied, *ppos);
} else {
/* XXX Need to write this */
- printk(KERN_INFO "Currently don't support large transfers\n");
+ pr_info("Currently don't support large transfers\n");
/* Map in pages from userspace */
/* Call vme_master_write to do the transfer */
@@ -286,7 +288,7 @@
retval = __copy_to_user(buf, image_ptr, (unsigned long)count);
if (retval != 0) {
retval = (count - retval);
- printk(KERN_WARNING "Partial copy to userspace\n");
+ pr_warn("Partial copy to userspace\n");
} else
retval = count;
@@ -305,7 +307,7 @@
retval = __copy_from_user(image_ptr, buf, (unsigned long)count);
if (retval != 0) {
retval = (count - retval);
- printk(KERN_WARNING "Partial copy to userspace\n");
+ pr_warn("Partial copy to userspace\n");
} else
retval = count;
@@ -476,7 +478,7 @@
copied = copy_from_user(&irq_req, argp,
sizeof(struct vme_irq_id));
if (copied != 0) {
- printk(KERN_WARNING "Partial copy from userspace\n");
+ pr_warn("Partial copy from userspace\n");
return -EFAULT;
}
@@ -503,8 +505,7 @@
copied = copy_to_user(argp, &master,
sizeof(struct vme_master));
if (copied != 0) {
- printk(KERN_WARNING "Partial copy to "
- "userspace\n");
+ pr_warn("Partial copy to userspace\n");
return -EFAULT;
}
@@ -515,8 +516,7 @@
copied = copy_from_user(&master, argp, sizeof(master));
if (copied != 0) {
- printk(KERN_WARNING "Partial copy from "
- "userspace\n");
+ pr_warn("Partial copy from userspace\n");
return -EFAULT;
}
@@ -546,8 +546,7 @@
copied = copy_to_user(argp, &slave,
sizeof(struct vme_slave));
if (copied != 0) {
- printk(KERN_WARNING "Partial copy to "
- "userspace\n");
+ pr_warn("Partial copy to userspace\n");
return -EFAULT;
}
@@ -558,8 +557,7 @@
copied = copy_from_user(&slave, argp, sizeof(slave));
if (copied != 0) {
- printk(KERN_WARNING "Partial copy from "
- "userspace\n");
+ pr_warn("Partial copy from userspace\n");
return -EFAULT;
}
@@ -599,8 +597,8 @@
{
if (image[num].kern_buf) {
#ifdef VME_DEBUG
- printk(KERN_DEBUG "UniverseII:Releasing buffer at %p\n",
- image[num].pci_buf);
+ pr_debug("UniverseII:Releasing buffer at %p\n",
+ image[num].pci_buf);
#endif
vme_free_consistent(image[num].resource, image[num].size_buf,
@@ -612,7 +610,7 @@
#ifdef VME_DEBUG
} else {
- printk(KERN_DEBUG "UniverseII: Buffer not allocated\n");
+ pr_debug("UniverseII: Buffer not allocated\n");
#endif
}
}
@@ -621,7 +619,7 @@
.name = driver_name,
.match = vme_user_match,
.probe = vme_user_probe,
- .remove = __devexit_p(vme_user_remove),
+ .remove = vme_user_remove,
};
@@ -629,11 +627,10 @@
{
int retval = 0;
- printk(KERN_INFO "VME User Space Access Driver\n");
+ pr_info("VME User Space Access Driver\n");
if (bus_num == 0) {
- printk(KERN_ERR "%s: No cards, skipping registration\n",
- driver_name);
+ pr_err("No cards, skipping registration\n");
retval = -ENODEV;
goto err_nocard;
}
@@ -642,8 +639,8 @@
* in future revisions if that ever becomes necessary.
*/
if (bus_num > VME_USER_BUS_MAX) {
- printk(KERN_ERR "%s: Driver only able to handle %d buses\n",
- driver_name, VME_USER_BUS_MAX);
+ pr_err("Driver only able to handle %d buses\n",
+ VME_USER_BUS_MAX);
bus_num = VME_USER_BUS_MAX;
}
@@ -676,15 +673,14 @@
* as practical. We will therefore reserve the buffers and request the images
* here so that we don't have to do it later.
*/
-static int __devinit vme_user_probe(struct vme_dev *vdev)
+static int vme_user_probe(struct vme_dev *vdev)
{
int i, err;
char name[12];
/* Save pointer to the bridge device */
if (vme_user_bridge != NULL) {
- printk(KERN_ERR "%s: Driver can only be loaded for 1 device\n",
- driver_name);
+ dev_err(&vdev->dev, "Driver can only be loaded for 1 device\n");
err = -EINVAL;
goto err_dev;
}
@@ -707,8 +703,8 @@
err = register_chrdev_region(MKDEV(VME_MAJOR, 0), VME_DEVS,
driver_name);
if (err) {
- printk(KERN_WARNING "%s: Error getting Major Number %d for "
- "driver.\n", driver_name, VME_MAJOR);
+ dev_warn(&vdev->dev, "Error getting Major Number %d for driver.\n",
+ VME_MAJOR);
goto err_region;
}
@@ -718,7 +714,7 @@
vme_user_cdev->owner = THIS_MODULE;
err = cdev_add(vme_user_cdev, MKDEV(VME_MAJOR, 0), VME_DEVS);
if (err) {
- printk(KERN_WARNING "%s: cdev_all failed\n", driver_name);
+ dev_warn(&vdev->dev, "cdev_all failed\n");
goto err_char;
}
@@ -732,16 +728,16 @@
image[i].resource = vme_slave_request(vme_user_bridge,
VME_A24, VME_SCT);
if (image[i].resource == NULL) {
- printk(KERN_WARNING "Unable to allocate slave "
- "resource\n");
+ dev_warn(&vdev->dev,
+ "Unable to allocate slave resource\n");
goto err_slave;
}
image[i].size_buf = PCI_BUF_SIZE;
image[i].kern_buf = vme_alloc_consistent(image[i].resource,
image[i].size_buf, &image[i].pci_buf);
if (image[i].kern_buf == NULL) {
- printk(KERN_WARNING "Unable to allocate memory for "
- "buffer\n");
+ dev_warn(&vdev->dev,
+ "Unable to allocate memory for buffer\n");
image[i].pci_buf = 0;
vme_slave_free(image[i].resource);
err = -ENOMEM;
@@ -758,15 +754,15 @@
image[i].resource = vme_master_request(vme_user_bridge,
VME_A32, VME_SCT, VME_D32);
if (image[i].resource == NULL) {
- printk(KERN_WARNING "Unable to allocate master "
- "resource\n");
+ dev_warn(&vdev->dev,
+ "Unable to allocate master resource\n");
goto err_master;
}
image[i].size_buf = PCI_BUF_SIZE;
image[i].kern_buf = kmalloc(image[i].size_buf, GFP_KERNEL);
if (image[i].kern_buf == NULL) {
- printk(KERN_WARNING "Unable to allocate memory for "
- "master window buffers\n");
+ dev_warn(&vdev->dev,
+ "Unable to allocate memory for master window buffers\n");
err = -ENOMEM;
goto err_master_buf;
}
@@ -775,7 +771,7 @@
/* Create sysfs entries - on udev systems this creates the dev files */
vme_user_sysfs_class = class_create(THIS_MODULE, driver_name);
if (IS_ERR(vme_user_sysfs_class)) {
- printk(KERN_ERR "Error creating vme_user class.\n");
+ dev_err(&vdev->dev, "Error creating vme_user class.\n");
err = PTR_ERR(vme_user_sysfs_class);
goto err_class;
}
@@ -803,8 +799,7 @@
image[i].device = device_create(vme_user_sysfs_class, NULL,
MKDEV(VME_MAJOR, i), NULL, name, num);
if (IS_ERR(image[i].device)) {
- printk(KERN_INFO "%s: Error creating sysfs device\n",
- driver_name);
+ dev_info(&vdev->dev, "Error creating sysfs device\n");
err = PTR_ERR(image[i].device);
goto err_sysfs;
}
@@ -851,7 +846,7 @@
return err;
}
-static int __devexit vme_user_remove(struct vme_dev *dev)
+static int vme_user_remove(struct vme_dev *dev)
{
int i;
diff --git a/drivers/staging/vt6655/device_main.c b/drivers/staging/vt6655/device_main.c
index 9e3b3f2b..453c83d 100644
--- a/drivers/staging/vt6655/device_main.c
+++ b/drivers/staging/vt6655/device_main.c
@@ -356,7 +356,7 @@
return chip_info_table[i].name;
}
-static void __devexit vt6655_remove(struct pci_dev *pcid)
+static void vt6655_remove(struct pci_dev *pcid)
{
PSDevice pDevice = pci_get_drvdata(pcid);
@@ -902,7 +902,7 @@
.ndo_set_rx_mode = device_set_multi,
};
-static int __devinit
+static int
vt6655_probe(struct pci_dev *pcid, const struct pci_device_id *ent)
{
static bool bFirst = true;
@@ -1099,7 +1099,7 @@
}
-static void __devinit vt6655_init_info(struct pci_dev* pcid, PSDevice* ppDevice,
+static void vt6655_init_info(struct pci_dev* pcid, PSDevice* ppDevice,
PCHIP_INFO pChip_info) {
PSDevice p;
diff --git a/drivers/staging/vt6655/hostap.c b/drivers/staging/vt6655/hostap.c
index 67b1b88..5f13890 100644
--- a/drivers/staging/vt6655/hostap.c
+++ b/drivers/staging/vt6655/hostap.c
@@ -596,9 +596,9 @@
if (param->u.crypt.seq) {
memcpy(&abySeq, param->u.crypt.seq, 8);
- for (ii = 0 ; ii < 8 ; ii++) {
- KeyRSC |= (abySeq[ii] << (ii * 8));
- }
+ for (ii = 0 ; ii < 8 ; ii++)
+ KeyRSC |= (unsigned long)abySeq[ii] << (ii * 8);
+
dwKeyIndex |= 1 << 29;
pMgmt->sNodeDBTable[iNodeIndex].KeyRSC = KeyRSC;
}
diff --git a/drivers/staging/vt6655/rxtx.c b/drivers/staging/vt6655/rxtx.c
index 4972e57..875ee44 100644
--- a/drivers/staging/vt6655/rxtx.c
+++ b/drivers/staging/vt6655/rxtx.c
@@ -242,7 +242,7 @@
}
// Append IV after Mac Header
*pdwIV &= WEP_IV_MASK;//00000000 11111111 11111111 11111111
- *pdwIV |= (byKeyIndex << 30);
+ *pdwIV |= (unsigned long)byKeyIndex << 30;
*pdwIV = cpu_to_le32(*pdwIV);
pDevice->dwIVCounter++;
if (pDevice->dwIVCounter > WEP_IV_MASK) {
diff --git a/drivers/staging/vt6655/wcmd.c b/drivers/staging/vt6655/wcmd.c
index 94bd1fc..6d0b87a 100644
--- a/drivers/staging/vt6655/wcmd.c
+++ b/drivers/staging/vt6655/wcmd.c
@@ -412,6 +412,7 @@
if (!is_channel_valid(pMgmt->uScanChannel)) {
DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Invalid channel pMgmt->uScanChannel = %d \n",pMgmt->uScanChannel);
s_bCommandComplete(pDevice);
+ spin_unlock_irq(&pDevice->lock);
return;
}
//printk("chester-pMgmt->uScanChannel=%d,pDevice->byMaxChannel=%d\n",pMgmt->uScanChannel,pDevice->byMaxChannel);
diff --git a/drivers/staging/vt6656/80211mgr.c b/drivers/staging/vt6656/80211mgr.c
index 39f9842..e6ced95 100644
--- a/drivers/staging/vt6656/80211mgr.c
+++ b/drivers/staging/vt6656/80211mgr.c
@@ -52,11 +52,11 @@
*
*/
+#include "device.h"
#include "tmacro.h"
#include "tether.h"
#include "80211mgr.h"
#include "80211hdr.h"
-#include "device.h"
#include "wpa.h"
/*--------------------- Static Definitions -------------------------*/
diff --git a/drivers/staging/vt6656/Makefile b/drivers/staging/vt6656/Makefile
index 41ed06b..c998547 100644
--- a/drivers/staging/vt6656/Makefile
+++ b/drivers/staging/vt6656/Makefile
@@ -20,7 +20,6 @@
rc4.o \
tether.o \
tcrc.o \
- ioctl.o \
hostap.o \
wpa.o \
key.o \
diff --git a/drivers/staging/vt6656/bssdb.c b/drivers/staging/vt6656/bssdb.c
index 2ac066d..6a13941 100644
--- a/drivers/staging/vt6656/bssdb.c
+++ b/drivers/staging/vt6656/bssdb.c
@@ -882,7 +882,6 @@
unsigned int uSleepySTACnt = 0;
unsigned int uNonShortSlotSTACnt = 0;
unsigned int uLongPreambleSTACnt = 0;
- viawget_wpa_header *wpahdr;
spin_lock_irq(&pDevice->lock);
@@ -913,7 +912,6 @@
if((pDevice->byReAssocCount > 10) && (pDevice->bLinkPass != TRUE)) { //10 sec timeout
printk("Re-association timeout!!!\n");
pDevice->byReAssocCount = 0;
- #ifdef WPA_SUPPLICANT_DRIVER_WEXT_SUPPORT
// if(pDevice->bWPASuppWextEnabled == TRUE)
{
union iwreq_data wrqu;
@@ -922,20 +920,11 @@
PRINT_K("wireless_send_event--->SIOCGIWAP(disassociated)\n");
wireless_send_event(pDevice->dev, SIOCGIWAP, &wrqu, NULL);
}
- #endif
}
else if(pDevice->bLinkPass == TRUE)
pDevice->byReAssocCount = 0;
}
-if((pMgmt->eCurrState!=WMAC_STATE_ASSOC) &&
- (pMgmt->eLastState==WMAC_STATE_ASSOC))
-{
- union iwreq_data wrqu;
- memset(&wrqu, 0, sizeof(wrqu));
- wrqu.data.flags = RT_DISCONNECTED_EVENT_FLAG;
- wireless_send_event(pDevice->dev, IWEVCUSTOM, &wrqu, NULL);
-}
pMgmt->eLastState = pMgmt->eCurrState ;
s_uCalculateLinkQual((void *)pDevice);
@@ -1102,21 +1091,6 @@
DBG_PRT(MSG_LEVEL_NOTICE, KERN_INFO "Lost AP beacon [%d] sec, disconnected !\n", pMgmt->sNodeDBTable[0].uInActiveCount);
/* let wpa supplicant know AP may disconnect */
- if ((pDevice->bWPADEVUp) && (pDevice->skb != NULL)) {
- wpahdr = (viawget_wpa_header *)pDevice->skb->data;
- wpahdr->type = VIAWGET_DISASSOC_MSG;
- wpahdr->resp_ie_len = 0;
- wpahdr->req_ie_len = 0;
- skb_put(pDevice->skb, sizeof(viawget_wpa_header));
- pDevice->skb->dev = pDevice->wpadev;
- skb_reset_mac_header(pDevice->skb);
- pDevice->skb->pkt_type = PACKET_HOST;
- pDevice->skb->protocol = htons(ETH_P_802_2);
- memset(pDevice->skb->cb, 0, sizeof(pDevice->skb->cb));
- netif_rx(pDevice->skb);
- pDevice->skb = dev_alloc_skb((int)pDevice->rx_buf_sz);
- }
- #ifdef WPA_SUPPLICANT_DRIVER_WEXT_SUPPORT
{
union iwreq_data wrqu;
memset(&wrqu, 0, sizeof (wrqu));
@@ -1124,7 +1098,6 @@
PRINT_K("wireless_send_event--->SIOCGIWAP(disassociated)\n");
wireless_send_event(pDevice->dev, SIOCGIWAP, &wrqu, NULL);
}
- #endif
}
}
else if (pItemSSID->len != 0) {
@@ -1144,20 +1117,6 @@
pDevice->uAutoReConnectTime = 0;
pDevice->uIsroamingTime = 0;
pDevice->bRoaming = FALSE;
-
- wpahdr = (viawget_wpa_header *)pDevice->skb->data;
- wpahdr->type = VIAWGET_CCKM_ROAM_MSG;
- wpahdr->resp_ie_len = 0;
- wpahdr->req_ie_len = 0;
- skb_put(pDevice->skb, sizeof(viawget_wpa_header));
- pDevice->skb->dev = pDevice->wpadev;
- skb_reset_mac_header(pDevice->skb);
- pDevice->skb->pkt_type = PACKET_HOST;
- pDevice->skb->protocol = htons(ETH_P_802_2);
- memset(pDevice->skb->cb, 0, sizeof(pDevice->skb->cb));
- netif_rx(pDevice->skb);
- pDevice->skb = dev_alloc_skb((int)pDevice->rx_buf_sz);
-
}
else if ((pDevice->bRoaming == FALSE)&&(pDevice->bIsRoaming == TRUE)) {
pDevice->uIsroamingTime++;
@@ -1169,11 +1128,9 @@
else {
if (pDevice->uAutoReConnectTime < 10) {
pDevice->uAutoReConnectTime++;
- #ifdef WPA_SUPPLICANT_DRIVER_WEXT_SUPPORT
//network manager support need not do Roaming scan???
if(pDevice->bWPASuppWextEnabled ==TRUE)
pDevice->uAutoReConnectTime = 0;
- #endif
}
else {
//mike use old encryption status for wpa reauthen
diff --git a/drivers/staging/vt6656/desc.h b/drivers/staging/vt6656/desc.h
index b68b2ec..5007e98 100644
--- a/drivers/staging/vt6656/desc.h
+++ b/drivers/staging/vt6656/desc.h
@@ -298,7 +298,7 @@
// Tx FIFO header
//
typedef struct tagSTxBufHead {
- DWORD adwTxKey[4];
+ u32 adwTxKey[4];
WORD wFIFOCtl;
WORD wTimeStamp;
WORD wFragCtl;
@@ -376,24 +376,24 @@
// MICHDR data header
//
typedef struct tagSMICHDRHead {
- DWORD adwHDR0[4];
- DWORD adwHDR1[4];
- DWORD adwHDR2[4];
+ u32 adwHDR0[4];
+ u32 adwHDR1[4];
+ u32 adwHDR2[4];
} __attribute__ ((__packed__))
SMICHDRHead, *PSMICHDRHead;
typedef const SMICHDRHead *PCSMICHDRHead;
typedef struct tagSBEACONCtl {
- DWORD BufReady : 1;
- DWORD TSF : 15;
- DWORD BufLen : 11;
- DWORD Reserved : 5;
+ u32 BufReady:1;
+ u32 TSF:15;
+ u32 BufLen:11;
+ u32 Reserved:5;
} __attribute__ ((__packed__))
SBEACONCtl;
typedef struct tagSSecretKey {
- DWORD dwLowDword;
+ u32 dwLowDword;
BYTE byHighByte;
} __attribute__ ((__packed__))
SSecretKey;
@@ -402,11 +402,11 @@
BYTE abyAddrHi[2];
WORD wKCTL;
BYTE abyAddrLo[4];
- DWORD dwKey0[4];
- DWORD dwKey1[4];
- DWORD dwKey2[4];
- DWORD dwKey3[4];
- DWORD dwKey4[4];
+ u32 dwKey0[4];
+ u32 dwKey1[4];
+ u32 dwKey2[4];
+ u32 dwKey3[4];
+ u32 dwKey4[4];
} __attribute__ ((__packed__))
SKeyEntry;
diff --git a/drivers/staging/vt6656/device.h b/drivers/staging/vt6656/device.h
index 6370d10..25bf03a 100644
--- a/drivers/staging/vt6656/device.h
+++ b/drivers/staging/vt6656/device.h
@@ -30,47 +30,28 @@
#define __DEVICE_H__
#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/errno.h>
-#include <linux/ioport.h>
-#include <linux/pci.h>
#include <linux/kernel.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-#include <linux/delay.h>
-#include <linux/timer.h>
#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <linux/string.h>
-#include <linux/wait.h>
-#include <linux/if_arp.h>
-#include <linux/sched.h>
-#include <linux/if.h>
-#include <linux/rtnetlink.h>//James
-#include <linux/proc_fs.h>
-#include <linux/inetdevice.h>
-#include <linux/reboot.h>
-#include <linux/usb.h>
-#include <linux/signal.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/device.h>
#include <linux/firmware.h>
-#include <asm/io.h>
-#include <asm/uaccess.h>
+#include <linux/etherdevice.h>
+#include <linux/suspend.h>
+#include <linux/if_arp.h>
+#include <linux/wireless.h>
+#include <net/iw_handler.h>
+#include <net/cfg80211.h>
+#include <linux/timer.h>
+#include <linux/usb.h>
+
+
#ifdef SIOCETHTOOL
#define DEVICE_ETHTOOL_IOCTL_SUPPORT
#include <linux/ethtool.h>
#else
#undef DEVICE_ETHTOOL_IOCTL_SUPPORT
#endif
-/* Include Wireless Extension definition and check version - Jean II */
-#include <linux/wireless.h>
-#include <net/iw_handler.h> // New driver API
-
-#ifndef WPA_SUPPLICANT_DRIVER_WEXT_SUPPORT
-#define WPA_SUPPLICANT_DRIVER_WEXT_SUPPORT
-#endif
//please copy below macro to driver_event.c for API
#define RT_INSMOD_EVENT_FLAG 0x0101
@@ -418,7 +399,6 @@
struct net_device* dev;
struct net_device_stats stats;
- const struct firmware *firmware;
OPTIONS sOpts;
@@ -734,7 +714,6 @@
BYTE byKeyIndex;
BOOL bAES;
- BYTE byCntMeasure;
unsigned int uKeyLength;
BYTE abyKey[WLAN_WEP232_KEYLEN];
@@ -814,16 +793,13 @@
//WPA supplicant daemon
struct net_device *wpadev;
BOOL bWPADEVUp;
- struct sk_buff *skb;
//--
-#ifdef WPA_SUPPLICANT_DRIVER_WEXT_SUPPORT
BOOL bwextstep0;
BOOL bwextstep1;
BOOL bwextstep2;
BOOL bwextstep3;
BOOL bWPASuppWextEnabled;
-#endif
#ifdef HOSTAP
// user space daemon: hostapd, is used for HOSTAP
diff --git a/drivers/staging/vt6656/dpc.c b/drivers/staging/vt6656/dpc.c
index 28edf9e..e94f6a1 100644
--- a/drivers/staging/vt6656/dpc.c
+++ b/drivers/staging/vt6656/dpc.c
@@ -332,7 +332,7 @@
PBYTE pbyFrame;
BOOL bDeFragRx = FALSE;
unsigned int cbHeaderOffset;
- unsigned int FrameSize;
+ u32 FrameSize;
WORD wEtherType = 0;
signed int iSANodeIndex = -1;
signed int iDANodeIndex = -1;
@@ -351,7 +351,7 @@
/* signed long ldBm = 0; */
BOOL bIsWEP = FALSE;
BOOL bExtIV = FALSE;
- DWORD dwWbkStatus;
+ u32 dwWbkStatus;
PRCB pRCBIndicate = pRCB;
PBYTE pbyDAddress;
PWORD pwPLCP_Length;
@@ -366,15 +366,15 @@
skb = pRCB->skb;
- //[31:16]RcvByteCount ( not include 4-byte Status )
- dwWbkStatus = *( (PDWORD)(skb->data) );
- FrameSize = (unsigned int)(dwWbkStatus >> 16);
- FrameSize += 4;
+ /* [31:16]RcvByteCount ( not include 4-byte Status ) */
+ dwWbkStatus = *((u32 *)(skb->data));
+ FrameSize = dwWbkStatus >> 16;
+ FrameSize += 4;
- if (BytesToIndicate != FrameSize) {
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"---------- WRONG Length 1 \n");
- return FALSE;
- }
+ if (BytesToIndicate != FrameSize) {
+ DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"------- WRONG Length 1\n");
+ return FALSE;
+ }
if ((BytesToIndicate > 2372) || (BytesToIndicate <= 40)) {
// Frame Size error drop this packet.
@@ -617,7 +617,7 @@
//Discard beacon packet which channel is 0
if ( (WLAN_GET_FC_FSTYPE((pRxPacket->p80211Header->sA3.wFrameCtl)) == WLAN_FSTYPE_BEACON) ||
(WLAN_GET_FC_FSTYPE((pRxPacket->p80211Header->sA3.wFrameCtl)) == WLAN_FSTYPE_PROBERESP) ) {
- return TRUE;
+ return FALSE;
}
}
pRxPacket->byRxChannel = (*pbyRxSts) >> 2;
@@ -818,7 +818,6 @@
DWORD dwMICKey0 = 0, dwMICKey1 = 0;
DWORD dwLocalMIC_L = 0;
DWORD dwLocalMIC_R = 0;
- viawget_wpa_header *wpahdr;
if (pMgmt->eCurrMode == WMAC_MODE_ESS_AP) {
@@ -864,7 +863,6 @@
pDevice->dev->name);
}
}
- #ifdef WPA_SUPPLICANT_DRIVER_WEXT_SUPPORT
//send event to wpa_supplicant
//if(pDevice->bWPASuppWextEnabled == TRUE)
{
@@ -889,31 +887,6 @@
wireless_send_event(pDevice->dev, IWEVMICHAELMICFAILURE, &wrqu, (char *)&ev);
}
- #endif
-
-
- if ((pDevice->bWPADEVUp) && (pDevice->skb != NULL)) {
- wpahdr = (viawget_wpa_header *)pDevice->skb->data;
- if ((pMgmt->eCurrMode == WMAC_MODE_ESS_STA) &&
- (pMgmt->eCurrState == WMAC_STATE_ASSOC) &&
- (*pbyRsr & (RSR_ADDRBROAD | RSR_ADDRMULTI)) == 0) {
- //s802_11_Status.Flags = NDIS_802_11_AUTH_REQUEST_PAIRWISE_ERROR;
- wpahdr->type = VIAWGET_PTK_MIC_MSG;
- } else {
- //s802_11_Status.Flags = NDIS_802_11_AUTH_REQUEST_GROUP_ERROR;
- wpahdr->type = VIAWGET_GTK_MIC_MSG;
- }
- wpahdr->resp_ie_len = 0;
- wpahdr->req_ie_len = 0;
- skb_put(pDevice->skb, sizeof(viawget_wpa_header));
- pDevice->skb->dev = pDevice->wpadev;
- skb_reset_mac_header(pDevice->skb);
- pDevice->skb->pkt_type = PACKET_HOST;
- pDevice->skb->protocol = htons(ETH_P_802_2);
- memset(pDevice->skb->cb, 0, sizeof(pDevice->skb->cb));
- netif_rx(pDevice->skb);
- pDevice->skb = dev_alloc_skb((int)pDevice->rx_buf_sz);
- }
return FALSE;
@@ -1217,7 +1190,7 @@
if (byDecMode == KEY_CTL_WEP) {
// handle WEP
if ((pDevice->byLocalID <= REV_ID_VT3253_A1) ||
- (((PSKeyTable)(pKey->pvKeyTable))->bSoftWEP == TRUE)) {
+ (((PSKeyTable)(&pKey->pvKeyTable))->bSoftWEP == TRUE)) {
// Software WEP
// 1. 3253A
// 2. WEP 256
@@ -1238,7 +1211,7 @@
PayloadLen -= (WLAN_HDR_ADDR3_LEN + 8 + 4); // 24 is 802.11 header, 8 is IV&ExtIV, 4 is crc
*pdwRxTSC47_16 = cpu_to_le32(*(PDWORD)(pbyIV + 4));
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"ExtIV: %lx\n",*pdwRxTSC47_16);
+ DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"ExtIV: %x\n", *pdwRxTSC47_16);
if (byDecMode == KEY_CTL_TKIP) {
*pwRxTSC15_0 = cpu_to_le16(MAKEWORD(*(pbyIV+2), *pbyIV));
} else {
@@ -1324,9 +1297,9 @@
if (byDecMode == KEY_CTL_WEP) {
// handle WEP
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"byDecMode == KEY_CTL_WEP \n");
+ DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"byDecMode == KEY_CTL_WEP\n");
if ((pDevice->byLocalID <= REV_ID_VT3253_A1) ||
- (((PSKeyTable)(pKey->pvKeyTable))->bSoftWEP == TRUE) ||
+ (((PSKeyTable)(&pKey->pvKeyTable))->bSoftWEP == TRUE) ||
(bOnFly == FALSE)) {
// Software WEP
// 1. 3253A
@@ -1349,7 +1322,7 @@
PayloadLen -= (WLAN_HDR_ADDR3_LEN + 8 + 4); // 24 is 802.11 header, 8 is IV&ExtIV, 4 is crc
*pdwRxTSC47_16 = cpu_to_le32(*(PDWORD)(pbyIV + 4));
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"ExtIV: %lx\n",*pdwRxTSC47_16);
+ DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"ExtIV: %x\n", *pdwRxTSC47_16);
if (byDecMode == KEY_CTL_TKIP) {
*pwRxTSC15_0 = cpu_to_le16(MAKEWORD(*(pbyIV+2), *pbyIV));
@@ -1534,6 +1507,11 @@
ASSERT(!pRCB->Ref); // should be 0
ASSERT(pRCB->pDevice); // shouldn't be NULL
+ if (bReAllocSkb == FALSE) {
+ kfree_skb(pRCB->skb);
+ bReAllocSkb = TRUE;
+ }
+
if (bReAllocSkb == TRUE) {
pRCB->skb = dev_alloc_skb((int)pDevice->rx_buf_sz);
// todo error handling
diff --git a/drivers/staging/vt6656/firmware.c b/drivers/staging/vt6656/firmware.c
index 8c8126a..8831ea0 100644
--- a/drivers/staging/vt6656/firmware.c
+++ b/drivers/staging/vt6656/firmware.c
@@ -61,28 +61,24 @@
PSDevice pDevice
)
{
+ struct device *dev = &pDevice->usb->dev;
const struct firmware *fw;
int NdisStatus;
void *pBuffer = NULL;
BOOL result = FALSE;
u16 wLength;
- int ii;
+ int ii, rc;
+
DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"---->Download firmware\n");
spin_unlock_irq(&pDevice->lock);
- if (!pDevice->firmware) {
- struct device *dev = &pDevice->usb->dev;
- int rc;
-
- rc = request_firmware(&pDevice->firmware, FIRMWARE_NAME, dev);
- if (rc) {
- dev_err(dev, "firmware file %s request failed (%d)\n",
- FIRMWARE_NAME, rc);
+ rc = request_firmware(&fw, FIRMWARE_NAME, dev);
+ if (rc) {
+ dev_err(dev, "firmware file %s request failed (%d)\n",
+ FIRMWARE_NAME, rc);
goto out;
- }
}
- fw = pDevice->firmware;
pBuffer = kmalloc(FIRMWARE_CHUNK_SIZE, GFP_KERNEL);
if (!pBuffer)
@@ -103,10 +99,12 @@
DBG_PRT(MSG_LEVEL_DEBUG,
KERN_INFO"Download firmware...%d %zu\n", ii, fw->size);
if (NdisStatus != STATUS_SUCCESS)
- goto out;
+ goto free_fw;
}
result = TRUE;
+free_fw:
+ release_firmware(fw);
out:
kfree(pBuffer);
diff --git a/drivers/staging/vt6656/hostap.c b/drivers/staging/vt6656/hostap.c
index 0a73d40..26a7d0e 100644
--- a/drivers/staging/vt6656/hostap.c
+++ b/drivers/staging/vt6656/hostap.c
@@ -542,9 +542,9 @@
if (param->u.crypt.seq) {
memcpy(&abySeq, param->u.crypt.seq, 8);
- for (ii = 0 ; ii < 8 ; ii++) {
- KeyRSC |= (abySeq[ii] << (ii * 8));
- }
+ for (ii = 0 ; ii < 8 ; ii++)
+ KeyRSC |= (unsigned long)abySeq[ii] << (ii * 8);
+
dwKeyIndex |= 1 << 29;
pMgmt->sNodeDBTable[iNodeIndex].KeyRSC = KeyRSC;
}
diff --git a/drivers/staging/vt6656/int.h b/drivers/staging/vt6656/int.h
index 3734e2c..5d8faf9 100644
--- a/drivers/staging/vt6656/int.h
+++ b/drivers/staging/vt6656/int.h
@@ -48,8 +48,8 @@
BYTE byTSR3;
BYTE byPkt3;
WORD wTime3;
- DWORD dwLoTSF;
- DWORD dwHiTSF;
+ u32 dwLoTSF;
+ u32 dwHiTSF;
BYTE byISR0;
BYTE byISR1;
BYTE byRTSSuccess;
diff --git a/drivers/staging/vt6656/ioctl.c b/drivers/staging/vt6656/ioctl.c
deleted file mode 100644
index b6af5f6..0000000
--- a/drivers/staging/vt6656/ioctl.c
+++ /dev/null
@@ -1,648 +0,0 @@
-/*
- * Copyright (c) 1996, 2003 VIA Networking Technologies, Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- *
- * File: ioctl.c
- *
- * Purpose: private ioctl functions
- *
- * Author: Lyndon Chen
- *
- * Date: Auguest 20, 2003
- *
- * Functions:
- *
- * Revision History:
- *
- */
-
-#include "ioctl.h"
-#include "iocmd.h"
-#include "mac.h"
-#include "card.h"
-#include "hostap.h"
-#include "wpactl.h"
-#include "control.h"
-#include "rndis.h"
-#include "rf.h"
-
-SWPAResult wpa_Result;
-static int msglevel = MSG_LEVEL_INFO;
-
-int private_ioctl(PSDevice pDevice, struct ifreq *rq)
-{
-
- PSCmdRequest pReq = (PSCmdRequest)rq;
- PSMgmtObject pMgmt = &(pDevice->sMgmtObj);
- int result = 0;
- PWLAN_IE_SSID pItemSSID;
- SCmdBSSJoin sJoinCmd;
- SCmdZoneTypeSet sZoneTypeCmd;
- SCmdScan sScanCmd;
- SCmdStartAP sStartAPCmd;
- SCmdSetWEP sWEPCmd;
- SCmdValue sValue;
- SBSSIDList sList;
- SNodeList sNodeList;
- PSBSSIDList pList;
- PSNodeList pNodeList;
- unsigned int cbListCount;
- PKnownBSS pBSS;
- PKnownNodeDB pNode;
- unsigned int ii, jj;
- SCmdLinkStatus sLinkStatus;
- BYTE abySuppRates[] = {WLAN_EID_SUPP_RATES, 4, 0x02, 0x04, 0x0B, 0x16};
- BYTE abyNullAddr[] = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
- DWORD dwKeyIndex = 0;
- BYTE abyScanSSID[WLAN_IEHDR_LEN + WLAN_SSID_MAXLEN + 1];
- signed long ldBm;
-
- pReq->wResult = 0;
-
- switch (pReq->wCmdCode) {
- case WLAN_CMD_BSS_SCAN:
- if (copy_from_user(&sScanCmd, pReq->data, sizeof(SCmdScan))) {
- result = -EFAULT;
- break;
- }
-
- pItemSSID = (PWLAN_IE_SSID)sScanCmd.ssid;
- if (pItemSSID->len > WLAN_SSID_MAXLEN + 1)
- return -EINVAL;
- if (pItemSSID->len != 0) {
- memset(abyScanSSID, 0, WLAN_IEHDR_LEN + WLAN_SSID_MAXLEN + 1);
- memcpy(abyScanSSID, pItemSSID, pItemSSID->len + WLAN_IEHDR_LEN);
- }
- spin_lock_irq(&pDevice->lock);
-
- if (memcmp(pMgmt->abyCurrBSSID, &abyNullAddr[0], 6) == 0)
- BSSvClearBSSList(pDevice, FALSE);
- else
- BSSvClearBSSList(pDevice, pDevice->bLinkPass);
-
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "WLAN_CMD_BSS_SCAN..begin\n");
-
- if (pItemSSID->len != 0)
- bScheduleCommand(pDevice, WLAN_CMD_BSSID_SCAN,
- abyScanSSID);
- else
- bScheduleCommand(pDevice, WLAN_CMD_BSSID_SCAN, NULL);
-
- spin_unlock_irq(&pDevice->lock);
- break;
-
- case WLAN_CMD_ZONETYPE_SET:
- result = -EOPNOTSUPP;
- break;
-
- if (copy_from_user(&sZoneTypeCmd, pReq->data, sizeof(SCmdZoneTypeSet))) {
- result = -EFAULT;
- break;
- }
-
- if (sZoneTypeCmd.bWrite == TRUE) {
- /* write zonetype */
- if (sZoneTypeCmd.ZoneType == ZoneType_USA) {
- /* set to USA */
- printk("set_ZoneType:USA\n");
- } else if (sZoneTypeCmd.ZoneType == ZoneType_Japan) {
- /* set to Japan */
- printk("set_ZoneType:Japan\n");
- } else if (sZoneTypeCmd.ZoneType == ZoneType_Europe) {
- /* set to Europe */
- printk("set_ZoneType:Europe\n");
- }
- } else {
- /* read zonetype */
- BYTE zonetype = 0;
-
- if (zonetype == 0x00) { /* USA */
- sZoneTypeCmd.ZoneType = ZoneType_USA;
- } else if (zonetype == 0x01) { /* Japan */
- sZoneTypeCmd.ZoneType = ZoneType_Japan;
- } else if (zonetype == 0x02) { /* Europe */
- sZoneTypeCmd.ZoneType = ZoneType_Europe;
- } else { /* Unknown ZoneType */
- printk("Error:ZoneType[%x] Unknown ???\n", zonetype);
- result = -EFAULT;
- break;
- }
-
- if (copy_to_user(pReq->data, &sZoneTypeCmd,
- sizeof(SCmdZoneTypeSet))) {
- result = -EFAULT;
- break;
- }
- }
- break;
-
- case WLAN_CMD_BSS_JOIN:
- if (copy_from_user(&sJoinCmd, pReq->data, sizeof(SCmdBSSJoin))) {
- result = -EFAULT;
- break;
- }
-
- pItemSSID = (PWLAN_IE_SSID)sJoinCmd.ssid;
- if (pItemSSID->len > WLAN_SSID_MAXLEN + 1)
- return -EINVAL;
- memset(pMgmt->abyDesireSSID, 0, WLAN_IEHDR_LEN + WLAN_SSID_MAXLEN + 1);
- memcpy(pMgmt->abyDesireSSID, pItemSSID, pItemSSID->len + WLAN_IEHDR_LEN);
- if (sJoinCmd.wBSSType == ADHOC) {
- pMgmt->eConfigMode = WMAC_CONFIG_IBSS_STA;
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "ioct set to adhoc mode\n");
- } else {
- pMgmt->eConfigMode = WMAC_CONFIG_ESS_STA;
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "ioct set to STA mode\n");
- }
- if (sJoinCmd.bPSEnable == TRUE) {
- pDevice->ePSMode = WMAC_POWER_FAST;
- pMgmt->wListenInterval = 2;
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Power Saving On\n");
- } else {
- pDevice->ePSMode = WMAC_POWER_CAM;
- pMgmt->wListenInterval = 1;
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Power Saving Off\n");
- }
-
- if (sJoinCmd.bShareKeyAuth == TRUE) {
- pMgmt->bShareKeyAlgorithm = TRUE;
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Share Key\n");
- } else {
- pMgmt->bShareKeyAlgorithm = FALSE;
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Open System\n");
- }
-
- pDevice->uChannel = sJoinCmd.uChannel;
- netif_stop_queue(pDevice->dev);
- spin_lock_irq(&pDevice->lock);
- pMgmt->eCurrState = WMAC_STATE_IDLE;
- bScheduleCommand(pDevice, WLAN_CMD_BSSID_SCAN,
- pMgmt->abyDesireSSID);
- bScheduleCommand(pDevice, WLAN_CMD_SSID, NULL);
- spin_unlock_irq(&pDevice->lock);
- break;
-
- case WLAN_CMD_SET_WEP:
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "WLAN_CMD_SET_WEP Key.\n");
- memset(&sWEPCmd, 0, sizeof(SCmdSetWEP));
- if (copy_from_user(&sWEPCmd, pReq->data, sizeof(SCmdSetWEP))) {
- result = -EFAULT;
- break;
- }
- if (sWEPCmd.bEnableWep != TRUE) {
- int uu;
-
- pDevice->bEncryptionEnable = FALSE;
- pDevice->eEncryptionStatus = Ndis802_11EncryptionDisabled;
- spin_lock_irq(&pDevice->lock);
- for (uu = 0; uu < MAX_KEY_TABLE; uu++)
- MACvDisableKeyEntry(pDevice, uu);
- spin_unlock_irq(&pDevice->lock);
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "WEP function disable.\n");
- break;
- }
-
- for (ii = 0; ii < WLAN_WEP_NKEYS; ii++) {
- if (sWEPCmd.bWepKeyAvailable[ii]) {
- if (ii == sWEPCmd.byKeyIndex)
- dwKeyIndex = ii | (1 << 31);
- else
- dwKeyIndex = ii;
- spin_lock_irq(&pDevice->lock);
- KeybSetDefaultKey(pDevice, &(pDevice->sKey),
- dwKeyIndex,
- sWEPCmd.auWepKeyLength[ii],
- NULL,
- (PBYTE)&sWEPCmd.abyWepKey[ii][0],
- KEY_CTL_WEP);
- spin_unlock_irq(&pDevice->lock);
- }
- }
- pDevice->byKeyIndex = sWEPCmd.byKeyIndex;
- pDevice->bTransmitKey = TRUE;
- pDevice->bEncryptionEnable = TRUE;
- pDevice->eEncryptionStatus = Ndis802_11Encryption1Enabled;
- break;
-
- case WLAN_CMD_GET_LINK:
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "WLAN_CMD_GET_LINK status.\n");
-
- memset(sLinkStatus.abySSID, 0, WLAN_SSID_MAXLEN + 1);
-
- if (pMgmt->eCurrMode == WMAC_MODE_IBSS_STA)
- sLinkStatus.wBSSType = ADHOC;
- else
- sLinkStatus.wBSSType = INFRA;
-
- if (pMgmt->eCurrState == WMAC_STATE_JOINTED)
- sLinkStatus.byState = ADHOC_JOINTED;
- else
- sLinkStatus.byState = ADHOC_STARTED;
-
- sLinkStatus.uChannel = pMgmt->uCurrChannel;
- if (pDevice->bLinkPass == TRUE) {
- sLinkStatus.bLink = TRUE;
- pItemSSID = (PWLAN_IE_SSID)pMgmt->abyCurrSSID;
- memcpy(sLinkStatus.abySSID, pItemSSID->abySSID, pItemSSID->len);
- memcpy(sLinkStatus.abyBSSID, pMgmt->abyCurrBSSID, WLAN_BSSID_LEN);
- sLinkStatus.uLinkRate = pMgmt->sNodeDBTable[0].wTxDataRate;
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Link Success!\n");
- } else {
- sLinkStatus.bLink = FALSE;
- sLinkStatus.uLinkRate = 0;
- }
- if (copy_to_user(pReq->data, &sLinkStatus,
- sizeof(SCmdLinkStatus))) {
- result = -EFAULT;
- break;
- }
- break;
-
- case WLAN_CMD_GET_LISTLEN:
- cbListCount = 0;
- pBSS = &(pMgmt->sBSSList[0]);
- for (ii = 0; ii < MAX_BSS_NUM; ii++) {
- pBSS = &(pMgmt->sBSSList[ii]);
- if (!pBSS->bActive)
- continue;
- cbListCount++;
- }
- sList.uItem = cbListCount;
- if (copy_to_user(pReq->data, &sList, sizeof(SBSSIDList))) {
- result = -EFAULT;
- break;
- }
- pReq->wResult = 0;
- break;
-
- case WLAN_CMD_GET_LIST:
- if (copy_from_user(&sList, pReq->data, sizeof(SBSSIDList))) {
- result = -EFAULT;
- break;
- }
- if (sList.uItem > (ULONG_MAX - sizeof(SBSSIDList)) / sizeof(SBSSIDItem)) {
- result = -EINVAL;
- break;
- }
- pList = kmalloc(sizeof(SBSSIDList) + (sList.uItem * sizeof(SBSSIDItem)), GFP_ATOMIC);
- if (pList == NULL) {
- result = -ENOMEM;
- break;
- }
- pList->uItem = sList.uItem;
- pBSS = &(pMgmt->sBSSList[0]);
- for (ii = 0, jj = 0; jj < MAX_BSS_NUM ; jj++) {
- pBSS = &(pMgmt->sBSSList[jj]);
- if (pBSS->bActive) {
- pList->sBSSIDList[ii].uChannel = pBSS->uChannel;
- pList->sBSSIDList[ii].wBeaconInterval = pBSS->wBeaconInterval;
- pList->sBSSIDList[ii].wCapInfo = pBSS->wCapInfo;
- RFvRSSITodBm(pDevice, (BYTE)(pBSS->uRSSI), &ldBm);
- pList->sBSSIDList[ii].uRSSI = (unsigned int)ldBm;
- /* pList->sBSSIDList[ii].uRSSI = pBSS->uRSSI; */
- memcpy(pList->sBSSIDList[ii].abyBSSID, pBSS->abyBSSID, WLAN_BSSID_LEN);
- pItemSSID = (PWLAN_IE_SSID)pBSS->abySSID;
- memset(pList->sBSSIDList[ii].abySSID, 0, WLAN_SSID_MAXLEN + 1);
- memcpy(pList->sBSSIDList[ii].abySSID, pItemSSID->abySSID, pItemSSID->len);
- if (WLAN_GET_CAP_INFO_ESS(pBSS->wCapInfo)) {
- pList->sBSSIDList[ii].byNetType = INFRA;
- } else {
- pList->sBSSIDList[ii].byNetType = ADHOC;
- }
- if (WLAN_GET_CAP_INFO_PRIVACY(pBSS->wCapInfo)) {
- pList->sBSSIDList[ii].bWEPOn = TRUE;
- } else {
- pList->sBSSIDList[ii].bWEPOn = FALSE;
- }
- ii++;
- if (ii >= pList->uItem)
- break;
- }
- }
-
- if (copy_to_user(pReq->data, pList, sizeof(SBSSIDList) + (sList.uItem * sizeof(SBSSIDItem)))) {
- result = -EFAULT;
- break;
- }
- kfree(pList);
- pReq->wResult = 0;
- break;
-
- case WLAN_CMD_GET_MIB:
- if (copy_to_user(pReq->data, &(pDevice->s802_11Counter), sizeof(SDot11MIBCount))) {
- result = -EFAULT;
- break;
- }
- break;
-
- case WLAN_CMD_GET_STAT:
- if (copy_to_user(pReq->data, &(pDevice->scStatistic), sizeof(SStatCounter))) {
- result = -EFAULT;
- break;
- }
- break;
-
- case WLAN_CMD_STOP_MAC:
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "WLAN_CMD_STOP_MAC\n");
- /* Todo xxxxxx */
- netif_stop_queue(pDevice->dev);
- spin_lock_irq(&pDevice->lock);
- if (pDevice->bRadioOff == FALSE) {
- CARDbRadioPowerOff(pDevice);
- }
- pDevice->bLinkPass = FALSE;
- ControlvMaskByte(pDevice, MESSAGE_REQUEST_MACREG, MAC_REG_PAPEDELAY, LEDSTS_STS, LEDSTS_SLOW);
- memset(pMgmt->abyCurrBSSID, 0, 6);
- pMgmt->eCurrState = WMAC_STATE_IDLE;
- /* del_timer(&pDevice->sTimerCommand); */
- /* del_timer(&pMgmt->sTimerSecondCallback); */
- pDevice->bCmdRunning = FALSE;
- spin_unlock_irq(&pDevice->lock);
- break;
-
- case WLAN_CMD_START_MAC:
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "WLAN_CMD_START_MAC\n");
- /* Todo xxxxxxx */
- if (pDevice->bRadioOff == TRUE)
- CARDbRadioPowerOn(pDevice);
- break;
-
- case WLAN_CMD_SET_HOSTAPD:
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "WLAN_CMD_SET_HOSTAPD\n");
-
- if (copy_from_user(&sValue, pReq->data, sizeof(SCmdValue))) {
- result = -EFAULT;
- break;
- }
- if (sValue.dwValue == 1) {
- if (vt6656_hostap_set_hostapd(pDevice, 1, 1) == 0) {
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Enable HOSTAP\n");
- } else {
- result = -EFAULT;
- break;
- }
- } else {
- vt6656_hostap_set_hostapd(pDevice, 0, 1);
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Disable HOSTAP\n");
- }
- break;
-
- case WLAN_CMD_SET_HOSTAPD_STA:
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "WLAN_CMD_SET_HOSTAPD_STA\n");
- break;
-
- case WLAN_CMD_SET_802_1X:
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "WLAN_CMD_SET_802_1X\n");
- if (copy_from_user(&sValue, pReq->data, sizeof(SCmdValue))) {
- result = -EFAULT;
- break;
- }
-
- if (sValue.dwValue == 1) {
- pDevice->bEnable8021x = TRUE;
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Enable 802.1x\n");
- } else {
- pDevice->bEnable8021x = FALSE;
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Disable 802.1x\n");
- }
- break;
-
- case WLAN_CMD_SET_HOST_WEP:
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "WLAN_CMD_SET_HOST_WEP\n");
- if (copy_from_user(&sValue, pReq->data, sizeof(SCmdValue))) {
- result = -EFAULT;
- break;
- }
-
- if (sValue.dwValue == 1) {
- pDevice->bEnableHostWEP = TRUE;
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Enable HostWEP\n");
- } else {
- pDevice->bEnableHostWEP = FALSE;
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Disable HostWEP\n");
- }
- break;
-
- case WLAN_CMD_SET_WPA:
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "WLAN_CMD_SET_WPA\n");
-
- if (copy_from_user(&sValue, pReq->data, sizeof(SCmdValue))) {
- result = -EFAULT;
- break;
- }
- if (sValue.dwValue == 1) {
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "up wpadev\n");
- memcpy(pDevice->wpadev->dev_addr, pDevice->dev->dev_addr,
- ETH_ALEN);
- pDevice->bWPADEVUp = TRUE;
- } else {
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "close wpadev\n");
- pDevice->bWPADEVUp = FALSE;
- }
- break;
-
- case WLAN_CMD_AP_START:
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "WLAN_CMD_AP_START\n");
- if (pDevice->bRadioOff == TRUE) {
- CARDbRadioPowerOn(pDevice);
- add_timer(&pMgmt->sTimerSecondCallback);
- }
- if (copy_from_user(&sStartAPCmd, pReq->data, sizeof(SCmdStartAP))) {
- result = -EFAULT;
- break;
- }
-
- if (sStartAPCmd.wBSSType == AP) {
- pMgmt->eConfigMode = WMAC_CONFIG_AP;
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "ioct set to AP mode\n");
- } else {
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "ioct BSS type not set to AP mode\n");
- result = -EFAULT;
- break;
- }
-
- if (sStartAPCmd.wBBPType == PHY80211g) {
- pMgmt->byAPBBType = PHY_TYPE_11G;
- } else if (sStartAPCmd.wBBPType == PHY80211a) {
- pMgmt->byAPBBType = PHY_TYPE_11A;
- } else {
- pMgmt->byAPBBType = PHY_TYPE_11B;
- }
-
- pItemSSID = (PWLAN_IE_SSID)sStartAPCmd.ssid;
- if (pItemSSID->len > WLAN_SSID_MAXLEN + 1)
- return -EINVAL;
- memset(pMgmt->abyDesireSSID, 0, WLAN_IEHDR_LEN + WLAN_SSID_MAXLEN + 1);
- memcpy(pMgmt->abyDesireSSID, pItemSSID, pItemSSID->len + WLAN_IEHDR_LEN);
-
- if ((sStartAPCmd.uChannel > 0) && (sStartAPCmd.uChannel <= 14))
- pDevice->uChannel = sStartAPCmd.uChannel;
-
- if ((sStartAPCmd.uBeaconInt >= 20) && (sStartAPCmd.uBeaconInt <= 1000))
- pMgmt->wIBSSBeaconPeriod = sStartAPCmd.uBeaconInt;
- else
- pMgmt->wIBSSBeaconPeriod = 100;
-
- if (sStartAPCmd.bShareKeyAuth == TRUE) {
- pMgmt->bShareKeyAlgorithm = TRUE;
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Share Key\n");
- } else {
- pMgmt->bShareKeyAlgorithm = FALSE;
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Open System\n");
- }
- memcpy(pMgmt->abyIBSSSuppRates, abySuppRates, 6);
-
- if (sStartAPCmd.byBasicRate & BIT3) {
- pMgmt->abyIBSSSuppRates[2] |= BIT7;
- pMgmt->abyIBSSSuppRates[3] |= BIT7;
- pMgmt->abyIBSSSuppRates[4] |= BIT7;
- pMgmt->abyIBSSSuppRates[5] |= BIT7;
- } else if (sStartAPCmd.byBasicRate & BIT2) {
- pMgmt->abyIBSSSuppRates[2] |= BIT7;
- pMgmt->abyIBSSSuppRates[3] |= BIT7;
- pMgmt->abyIBSSSuppRates[4] |= BIT7;
- } else if (sStartAPCmd.byBasicRate & BIT1) {
- pMgmt->abyIBSSSuppRates[2] |= BIT7;
- pMgmt->abyIBSSSuppRates[3] |= BIT7;
- } else if (sStartAPCmd.byBasicRate & BIT1) {
- pMgmt->abyIBSSSuppRates[2] |= BIT7;
- } else {
- /* default 1,2M */
- pMgmt->abyIBSSSuppRates[2] |= BIT7;
- pMgmt->abyIBSSSuppRates[3] |= BIT7;
- }
-
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Support Rate= %*ph\n",
- 4, pMgmt->abyIBSSSuppRates + 2);
-
- netif_stop_queue(pDevice->dev);
- spin_lock_irq(&pDevice->lock);
- bScheduleCommand(pDevice, WLAN_CMD_RUN_AP, NULL);
- spin_unlock_irq(&pDevice->lock);
- break;
-
- case WLAN_CMD_GET_NODE_CNT:
- cbListCount = 0;
- pNode = &(pMgmt->sNodeDBTable[0]);
- for (ii = 0; ii < (MAX_NODE_NUM + 1); ii++) {
- pNode = &(pMgmt->sNodeDBTable[ii]);
- if (!pNode->bActive)
- continue;
- cbListCount++;
- }
-
- sNodeList.uItem = cbListCount;
- if (copy_to_user(pReq->data, &sNodeList, sizeof(SNodeList))) {
- result = -EFAULT;
- break;
- }
- pReq->wResult = 0;
- break;
-
- case WLAN_CMD_GET_NODE_LIST:
- if (copy_from_user(&sNodeList, pReq->data, sizeof(SNodeList))) {
- result = -EFAULT;
- break;
- }
- if (sNodeList.uItem > (ULONG_MAX - sizeof(SNodeList)) / sizeof(SNodeItem)) {
- result = -ENOMEM;
- break;
- }
- pNodeList = kmalloc(sizeof(SNodeList) + (sNodeList.uItem * sizeof(SNodeItem)), GFP_ATOMIC);
- if (pNodeList == NULL) {
- result = -ENOMEM;
- break;
- }
- pNodeList->uItem = sNodeList.uItem;
- pNode = &(pMgmt->sNodeDBTable[0]);
- for (ii = 0, jj = 0; ii < (MAX_NODE_NUM + 1); ii++) {
- pNode = &(pMgmt->sNodeDBTable[ii]);
- if (pNode->bActive) {
- pNodeList->sNodeList[jj].wAID = pNode->wAID;
- memcpy(pNodeList->sNodeList[jj].abyMACAddr, pNode->abyMACAddr, WLAN_ADDR_LEN);
- pNodeList->sNodeList[jj].wTxDataRate = pNode->wTxDataRate;
- pNodeList->sNodeList[jj].wInActiveCount = (WORD)pNode->uInActiveCount;
- pNodeList->sNodeList[jj].wEnQueueCnt = (WORD)pNode->wEnQueueCnt;
- pNodeList->sNodeList[jj].wFlags = (WORD)pNode->dwFlags;
- pNodeList->sNodeList[jj].bPWBitOn = pNode->bPSEnable;
- pNodeList->sNodeList[jj].byKeyIndex = pNode->byKeyIndex;
- pNodeList->sNodeList[jj].wWepKeyLength = pNode->uWepKeyLength;
- memcpy(&(pNodeList->sNodeList[jj].abyWepKey[0]), &(pNode->abyWepKey[0]), WEP_KEYMAXLEN);
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "key= %2.2X:%2.2X:%2.2X:%2.2X:%2.2X\n",
- pNodeList->sNodeList[jj].abyWepKey[0],
- pNodeList->sNodeList[jj].abyWepKey[1],
- pNodeList->sNodeList[jj].abyWepKey[2],
- pNodeList->sNodeList[jj].abyWepKey[3],
- pNodeList->sNodeList[jj].abyWepKey[4]);
- pNodeList->sNodeList[jj].bIsInFallback = pNode->bIsInFallback;
- pNodeList->sNodeList[jj].uTxFailures = pNode->uTxFailures;
- pNodeList->sNodeList[jj].uTxAttempts = pNode->uTxAttempts;
- pNodeList->sNodeList[jj].wFailureRatio = (WORD)pNode->uFailureRatio;
- jj++;
- if (jj >= pNodeList->uItem)
- break;
- }
- }
- if (copy_to_user(pReq->data, pNodeList, sizeof(SNodeList) + (sNodeList.uItem * sizeof(SNodeItem)))) {
- kfree(pNodeList);
- result = -EFAULT;
- break;
- }
- kfree(pNodeList);
- pReq->wResult = 0;
- break;
-
- case 0xFF:
- memset(wpa_Result.ifname, 0, sizeof(wpa_Result.ifname));
- wpa_Result.proto = 0;
- wpa_Result.key_mgmt = 0;
- wpa_Result.eap_type = 0;
- wpa_Result.authenticated = FALSE;
- pDevice->fWPA_Authened = FALSE;
- if (copy_from_user(&wpa_Result, pReq->data, sizeof(wpa_Result))) {
- result = -EFAULT;
- break;
- }
- /* for some AP's maybe a good authentication */
- if (wpa_Result.key_mgmt == 0x20)
- pMgmt->Cisco_cckm = 1;
- else
- pMgmt->Cisco_cckm = 0;
-
- if (wpa_Result.authenticated == TRUE) {
- {
- union iwreq_data wrqu;
-
- pItemSSID = (PWLAN_IE_SSID)pMgmt->abyCurrSSID;
- memset(&wrqu, 0, sizeof(wrqu));
- wrqu.data.flags = RT_WPACONNECTED_EVENT_FLAG;
- wrqu.data.length = pItemSSID->len;
- wireless_send_event(pDevice->dev, IWEVCUSTOM, &wrqu, pItemSSID->abySSID);
- }
-
- pDevice->fWPA_Authened = TRUE; /* is successful peer to wpa_Result.authenticated? */
- }
-
- pReq->wResult = 0;
- break;
-
- default:
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Private command not supported..\n");
- }
-
- return result;
-}
diff --git a/drivers/staging/vt6656/ioctl.h b/drivers/staging/vt6656/ioctl.h
deleted file mode 100644
index caa4ac9..0000000
--- a/drivers/staging/vt6656/ioctl.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * Copyright (c) 1996, 2003 VIA Networking Technologies, Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- *
- * File: hostap.h
- *
- * Purpose:
- *
- * Author: Lyndon Chen
- *
- * Date: May 21, 2003
- *
- */
-
-#ifndef __IOCTL_H__
-#define __IOCTL_H__
-
-#include "device.h"
-
-/*--------------------- Export Definitions -------------------------*/
-
-
-/*--------------------- Export Classes ----------------------------*/
-
-/*--------------------- Export Variables --------------------------*/
-
-/*--------------------- Export Functions --------------------------*/
-
-int private_ioctl(PSDevice pDevice, struct ifreq *rq);
-
-/*
-void vConfigWEPKey (
- PSDevice pDevice,
- DWORD dwKeyIndex,
- PBYTE pbyKey,
- unsigned long uKeyLength
- );
-*/
-
-#endif /* __IOCTL_H__ */
diff --git a/drivers/staging/vt6656/iwctl.c b/drivers/staging/vt6656/iwctl.c
index 8f19874..52fce69 100644
--- a/drivers/staging/vt6656/iwctl.c
+++ b/drivers/staging/vt6656/iwctl.c
@@ -31,26 +31,17 @@
*/
#include "device.h"
-#include "ioctl.h"
-#include "iocmd.h"
+#include "iwctl.h"
#include "mac.h"
#include "card.h"
#include "hostap.h"
#include "power.h"
#include "rf.h"
-
-#ifdef WPA_SUPPLICANT_DRIVER_WEXT_SUPPORT
#include "iowpa.h"
#include "wpactl.h"
-#endif
+#include "control.h"
+#include "rndis.h"
-#include <net/iw_handler.h>
-
-#ifdef WPA_SUPPLICANT_DRIVER_WEXT_SUPPORT
-#define SUPPORTED_WIRELESS_EXT 18
-#else
-#define SUPPORTED_WIRELESS_EXT 17
-#endif
static const long frequency_list[] = {
2412, 2417, 2422, 2427, 2432, 2437, 2442, 2447, 2452, 2457, 2462, 2467, 2472, 2484,
@@ -88,9 +79,9 @@
* Wireless Handler: get protocol name
*/
int iwctl_giwname(struct net_device *dev, struct iw_request_info *info,
- char *wrq, char *extra)
+ union iwreq_data *wrqu, char *extra)
{
- strcpy(wrq, "802.11-a/b/g");
+ strcpy(wrqu->name, "802.11-a/b/g");
return 0;
}
@@ -98,9 +89,10 @@
* Wireless Handler: set scan
*/
int iwctl_siwscan(struct net_device *dev, struct iw_request_info *info,
- struct iw_point *wrq, char *extra)
+ union iwreq_data *wrqu, char *extra)
{
PSDevice pDevice = netdev_priv(dev);
+ struct iw_point *wrq = &wrqu->data;
PSMgmtObject pMgmt = &(pDevice->sMgmtObj);
struct iw_scan_req *req = (struct iw_scan_req *)extra;
BYTE abyScanSSID[WLAN_IEHDR_LEN + WLAN_SSID_MAXLEN + 1];
@@ -109,7 +101,10 @@
if (!(pDevice->flags & DEVICE_FLAGS_OPENED))
return -EINVAL;
- PRINT_K(" SIOCSIWSCAN \n");
+ PRINT_K(" SIOCSIWSCAN\n");
+
+ if (pMgmt == NULL)
+ return -EFAULT;
if (pMgmt->eScanState == WMAC_IS_SCANNING) {
// In scanning..
@@ -137,9 +132,9 @@
pItemSSID = (PWLAN_IE_SSID)abyScanSSID;
pItemSSID->byElementID = WLAN_EID_SSID;
memcpy(pItemSSID->abySSID, req->essid, (int)req->essid_len);
- if (pItemSSID->abySSID[req->essid_len - 1] == '\0') {
+ if (pItemSSID->abySSID[req->essid_len] == '\0') {
if (req->essid_len > 0)
- pItemSSID->len = req->essid_len - 1;
+ pItemSSID->len = req->essid_len;
} else {
pItemSSID->len = req->essid_len;
}
@@ -168,8 +163,9 @@
* Wireless Handler : get scan results
*/
int iwctl_giwscan(struct net_device *dev, struct iw_request_info *info,
- struct iw_point *wrq, char *extra)
+ union iwreq_data *wrqu, char *extra)
{
+ struct iw_point *wrq = &wrqu->data;
int ii;
int jj;
int kk;
@@ -184,10 +180,12 @@
char *current_val = NULL;
struct iw_event iwe;
long ldBm;
- char buf[MAX_WPA_IE_LEN * 2 + 30];
DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCGIWSCAN\n");
+ if (pMgmt == NULL)
+ return -EFAULT;
+
if (pMgmt->eScanState == WMAC_IS_SCANNING) {
// In scanning..
return -EAGAIN;
@@ -286,12 +284,6 @@
if ((current_val - current_ev) > IW_EV_LCP_LEN)
current_ev = current_val;
- memset(&iwe, 0, sizeof(iwe));
- iwe.cmd = IWEVCUSTOM;
- sprintf(buf, "bcn_int=%d", pBSS->wBeaconInterval);
- iwe.u.data.length = strlen(buf);
- current_ev = iwe_stream_add_point(info, current_ev, end_buf, &iwe, buf);
-
if ((pBSS->wWPALen > 0) && (pBSS->wWPALen <= MAX_WPA_IE_LEN)) {
memset(&iwe, 0, sizeof(iwe));
iwe.cmd = IWEVGENIE;
@@ -315,12 +307,13 @@
* Wireless Handler: set frequence or channel
*/
int iwctl_siwfreq(struct net_device *dev, struct iw_request_info *info,
- struct iw_freq *wrq, char *extra)
+ union iwreq_data *wrqu, char *extra)
{
PSDevice pDevice = netdev_priv(dev);
+ struct iw_freq *wrq = &wrqu->freq;
int rc = 0;
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCSIWFREQ \n");
+ DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCSIWFREQ\n");
// If setting by frequency, convert to a channel
if ((wrq->e == 1) && (wrq->m >= (int)2.412e8) &&
@@ -353,12 +346,17 @@
* Wireless Handler: get frequence or channel
*/
int iwctl_giwfreq(struct net_device *dev, struct iw_request_info *info,
- struct iw_freq *wrq, char *extra)
+ union iwreq_data *wrqu, char *extra)
{
PSDevice pDevice = netdev_priv(dev);
+ struct iw_freq *wrq = &wrqu->freq;
PSMgmtObject pMgmt = &(pDevice->sMgmtObj);
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCGIWFREQ \n");
+ DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCGIWFREQ\n");
+
+ if (pMgmt == NULL)
+ return -EFAULT;
+
#ifdef WEXT_USECHANNELS
wrq->m = (int)pMgmt->uCurrChannel;
@@ -379,16 +377,21 @@
* Wireless Handler: set operation mode
*/
int iwctl_siwmode(struct net_device *dev, struct iw_request_info *info,
- __u32 *wmode, char *extra)
+ union iwreq_data *wrqu, char *extra)
{
PSDevice pDevice = netdev_priv(dev);
+ __u32 *wmode = &wrqu->mode;
PSMgmtObject pMgmt = &(pDevice->sMgmtObj);
int rc = 0;
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCSIWMODE \n");
+ DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCSIWMODE\n");
+
+ if (pMgmt == NULL)
+ return -EFAULT;
if (pMgmt->eCurrMode == WMAC_MODE_ESS_AP && pDevice->bEnableHostapd) {
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Can't set operation mode, hostapd is running \n");
+ DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO
+ "Can't set operation mode, hostapd is running\n");
return rc;
}
@@ -432,19 +435,72 @@
rc = -EINVAL;
}
+ if (pDevice->bCommit) {
+ if (pMgmt->eConfigMode == WMAC_CONFIG_AP) {
+ netif_stop_queue(pDevice->dev);
+ spin_lock_irq(&pDevice->lock);
+ bScheduleCommand((void *) pDevice,
+ WLAN_CMD_RUN_AP, NULL);
+ spin_unlock_irq(&pDevice->lock);
+ } else {
+ DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO
+ "Commit the settings\n");
+
+ spin_lock_irq(&pDevice->lock);
+
+ if (pDevice->bLinkPass &&
+ memcmp(pMgmt->abyCurrSSID,
+ pMgmt->abyDesireSSID,
+ WLAN_IEHDR_LEN + WLAN_SSID_MAXLEN)) {
+ bScheduleCommand((void *) pDevice,
+ WLAN_CMD_DISASSOCIATE, NULL);
+ } else {
+ pDevice->bLinkPass = FALSE;
+ pMgmt->eCurrState = WMAC_STATE_IDLE;
+ memset(pMgmt->abyCurrBSSID, 0, 6);
+ }
+
+ ControlvMaskByte(pDevice,
+ MESSAGE_REQUEST_MACREG, MAC_REG_PAPEDELAY,
+ LEDSTS_STS, LEDSTS_SLOW);
+
+ netif_stop_queue(pDevice->dev);
+
+ pMgmt->eScanType = WMAC_SCAN_ACTIVE;
+
+ if (!pDevice->bWPASuppWextEnabled)
+ bScheduleCommand((void *) pDevice,
+ WLAN_CMD_BSSID_SCAN,
+ pMgmt->abyDesireSSID);
+
+ bScheduleCommand((void *) pDevice,
+ WLAN_CMD_SSID,
+ NULL);
+
+ spin_unlock_irq(&pDevice->lock);
+ }
+ pDevice->bCommit = FALSE;
+ }
+
+
return rc;
}
/*
* Wireless Handler: get operation mode
*/
-void iwctl_giwmode(struct net_device *dev, struct iw_request_info *info,
- __u32 *wmode, char *extra)
+int iwctl_giwmode(struct net_device *dev, struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
{
PSDevice pDevice = netdev_priv(dev);
+ __u32 *wmode = &wrqu->mode;
PSMgmtObject pMgmt = &(pDevice->sMgmtObj);
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCGIWMODE \n");
+ DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCGIWMODE\n");
+
+ if (pMgmt == NULL)
+ return -EFAULT;
+
// If not managed, assume it's ad-hoc
switch (pMgmt->eConfigMode) {
case WMAC_CONFIG_ESS_STA:
@@ -462,14 +518,17 @@
default:
*wmode = IW_MODE_ADHOC;
}
+
+ return 0;
}
/*
* Wireless Handler: get capability range
*/
-void iwctl_giwrange(struct net_device *dev, struct iw_request_info *info,
- struct iw_point *wrq, char *extra)
+int iwctl_giwrange(struct net_device *dev, struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
{
+ struct iw_point *wrq = &wrqu->data;
struct iw_range *range = (struct iw_range *)extra;
int i;
int k;
@@ -546,7 +605,7 @@
range->txpower[0] = 100;
range->num_txpower = 1;
range->txpower_capa = IW_TXPOW_MWATT;
- range->we_version_source = SUPPORTED_WIRELESS_EXT;
+ range->we_version_source = WIRELESS_EXT;
range->we_version_compiled = WIRELESS_EXT;
range->retry_capa = IW_RETRY_LIMIT | IW_RETRY_LIFETIME;
range->retry_flags = IW_RETRY_LIMIT;
@@ -562,20 +621,26 @@
range->avg_qual.level = 176; // -80 dBm
range->avg_qual.noise = 0;
}
+
+ return 0;
}
/*
* Wireless Handler : set ap mac address
*/
int iwctl_siwap(struct net_device *dev, struct iw_request_info *info,
- struct sockaddr *wrq, char *extra)
+ union iwreq_data *wrqu, char *extra)
{
PSDevice pDevice = netdev_priv(dev);
+ struct sockaddr *wrq = &wrqu->ap_addr;
PSMgmtObject pMgmt = &(pDevice->sMgmtObj);
int rc = 0;
BYTE ZeroBSSID[WLAN_BSSID_LEN] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
- PRINT_K(" SIOCSIWAP \n");
+ PRINT_K(" SIOCSIWAP\n");
+
+ if (pMgmt == NULL)
+ return -EFAULT;
if (wrq->sa_family != ARPHRD_ETHER) {
rc = -EINVAL;
@@ -616,12 +681,16 @@
* Wireless Handler: get ap mac address
*/
int iwctl_giwap(struct net_device *dev, struct iw_request_info *info,
- struct sockaddr *wrq, char *extra)
+ union iwreq_data *wrqu, char *extra)
{
PSDevice pDevice = netdev_priv(dev);
+ struct sockaddr *wrq = &wrqu->ap_addr;
PSMgmtObject pMgmt = &(pDevice->sMgmtObj);
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCGIWAP \n");
+ DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCGIWAP\n");
+
+ if (pMgmt == NULL)
+ return -EFAULT;
memcpy(wrq->sa_data, pMgmt->abyCurrBSSID, 6);
@@ -639,59 +708,77 @@
* Wireless Handler: get ap list
*/
int iwctl_giwaplist(struct net_device *dev, struct iw_request_info *info,
- struct iw_point *wrq, char *extra)
+ union iwreq_data *wrqu, char *extra)
{
+ struct iw_point *wrq = &wrqu->data;
+ struct sockaddr *sock;
+ struct iw_quality *qual;
+ PSDevice pDevice = netdev_priv(dev);
+ PSMgmtObject pMgmt = &pDevice->sMgmtObj;
+ PKnownBSS pBSS = &pMgmt->sBSSList[0];
int ii;
int jj;
- int rc = 0;
- struct sockaddr sock[IW_MAX_AP];
- struct iw_quality qual[IW_MAX_AP];
- PSDevice pDevice = netdev_priv(dev);
- PSMgmtObject pMgmt = &(pDevice->sMgmtObj);
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCGIWAPLIST \n");
- // Only super-user can see AP list
+ DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCGIWAPLIST\n");
+ /* Only super-user can see AP list */
- if (!capable(CAP_NET_ADMIN)) {
- rc = -EPERM;
- return rc;
+ if (pBSS == NULL)
+ return -ENODEV;
+
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+
+ if (!wrq->pointer)
+ return -EINVAL;
+
+ sock = kzalloc(sizeof(struct sockaddr) * IW_MAX_AP, GFP_KERNEL);
+ if (sock == NULL)
+ return -ENOMEM;
+ qual = kzalloc(sizeof(struct iw_quality) * IW_MAX_AP, GFP_KERNEL);
+ if (qual == NULL) {
+ kfree(sock);
+ return -ENOMEM;
}
- if (wrq->pointer) {
- PKnownBSS pBSS = &(pMgmt->sBSSList[0]);
-
- for (ii = 0, jj= 0; ii < MAX_BSS_NUM; ii++) {
- pBSS = &(pMgmt->sBSSList[ii]);
- if (!pBSS->bActive)
- continue;
- if (jj >= IW_MAX_AP)
- break;
- memcpy(sock[jj].sa_data, pBSS->abyBSSID, 6);
- sock[jj].sa_family = ARPHRD_ETHER;
- qual[jj].level = pBSS->uRSSI;
- qual[jj].qual = qual[jj].noise = 0;
- qual[jj].updated = 2;
- jj++;
- }
-
- wrq->flags = 1; // Should be defined
- wrq->length = jj;
- memcpy(extra, sock, sizeof(struct sockaddr) * jj);
- memcpy(extra + sizeof(struct sockaddr) * jj, qual, sizeof(struct iw_quality) * jj);
+ for (ii = 0, jj = 0; ii < MAX_BSS_NUM; ii++) {
+ if (!pBSS[ii].bActive)
+ continue;
+ if (jj >= IW_MAX_AP)
+ break;
+ memcpy(sock[jj].sa_data, pBSS[ii].abyBSSID, 6);
+ sock[jj].sa_family = ARPHRD_ETHER;
+ qual[jj].level = pBSS[ii].uRSSI;
+ qual[jj].qual = qual[jj].noise = 0;
+ qual[jj].updated = 2;
+ jj++;
}
- return rc;
+
+ wrq->flags = 1; /* Should be defined */
+ wrq->length = jj;
+ memcpy(extra, sock, sizeof(struct sockaddr) * jj);
+ memcpy(extra + sizeof(struct sockaddr) * jj, qual,
+ sizeof(struct iw_quality) * jj);
+
+ kfree(sock);
+ kfree(qual);
+
+ return 0;
}
/*
* Wireless Handler: set essid
*/
int iwctl_siwessid(struct net_device *dev, struct iw_request_info *info,
- struct iw_point *wrq, char *extra)
+ union iwreq_data *wrqu, char *extra)
{
PSDevice pDevice = netdev_priv(dev);
+ struct iw_point *wrq = &wrqu->essid;
PSMgmtObject pMgmt = &(pDevice->sMgmtObj);
PWLAN_IE_SSID pItemSSID;
+ if (pMgmt == NULL)
+ return -EFAULT;
+
if (!(pDevice->flags & DEVICE_FLAGS_OPENED))
return -EINVAL;
@@ -704,10 +791,8 @@
memset(pMgmt->abyDesireSSID, 0, WLAN_IEHDR_LEN + WLAN_SSID_MAXLEN + 1);
memset(pMgmt->abyDesireBSSID, 0xFF,6);
PRINT_K("set essid to 'any' \n");
-#ifdef WPA_SUPPLICANT_DRIVER_WEXT_SUPPORT
// Unknown desired AP, so here need not associate??
return 0;
-#endif
} else {
// Set the SSID
memset(pMgmt->abyDesireSSID, 0, WLAN_IEHDR_LEN + WLAN_SSID_MAXLEN + 1);
@@ -715,9 +800,9 @@
pItemSSID->byElementID = WLAN_EID_SSID;
memcpy(pItemSSID->abySSID, extra, wrq->length);
- if (pItemSSID->abySSID[wrq->length - 1] == '\0') {
+ if (pItemSSID->abySSID[wrq->length] == '\0') {
if (wrq->length>0)
- pItemSSID->len = wrq->length - 1;
+ pItemSSID->len = wrq->length;
} else {
pItemSSID->len = wrq->length;
}
@@ -729,7 +814,6 @@
return 0;
}
-#ifdef WPA_SUPPLICANT_DRIVER_WEXT_SUPPORT
// Wext wil order another command of siwap to link
// with desired AP, so here need not associate??
if (pDevice->bWPASuppWextEnabled == TRUE) {
@@ -778,7 +862,6 @@
}
return 0;
}
-#endif
DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "set essid = %s \n", pItemSSID->abySSID);
}
@@ -792,14 +875,18 @@
/*
* Wireless Handler: get essid
*/
-void iwctl_giwessid(struct net_device *dev, struct iw_request_info *info,
- struct iw_point *wrq, char *extra)
+int iwctl_giwessid(struct net_device *dev, struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
{
PSDevice pDevice = netdev_priv(dev);
+ struct iw_point *wrq = &wrqu->essid;
PSMgmtObject pMgmt = &(pDevice->sMgmtObj);
PWLAN_IE_SSID pItemSSID;
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCGIWESSID \n");
+ DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCGIWESSID\n");
+
+ if (pMgmt == NULL)
+ return -EFAULT;
// Note: if wrq->u.data.flags != 0, we should get the relevant
// SSID from the SSID list...
@@ -811,15 +898,18 @@
wrq->length = pItemSSID->len;
wrq->flags = 1; // active
+
+ return 0;
}
/*
* Wireless Handler: set data rate
*/
int iwctl_siwrate(struct net_device *dev, struct iw_request_info *info,
- struct iw_param *wrq, char *extra)
+ union iwreq_data *wrqu, char *extra)
{
PSDevice pDevice = netdev_priv(dev);
+ struct iw_param *wrq = &wrqu->bitrate;
int rc = 0;
u8 brate = 0;
int i;
@@ -893,13 +983,18 @@
/*
* Wireless Handler: get data rate
*/
-void iwctl_giwrate(struct net_device *dev, struct iw_request_info *info,
- struct iw_param *wrq, char *extra)
+int iwctl_giwrate(struct net_device *dev, struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
{
PSDevice pDevice = netdev_priv(dev);
+ struct iw_param *wrq = &wrqu->bitrate;
PSMgmtObject pMgmt = &(pDevice->sMgmtObj);
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCGIWRATE \n");
+ DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCGIWRATE\n");
+
+ if (pMgmt == NULL)
+ return -EFAULT;
+
{
BYTE abySupportedRates[13] = {
0x02, 0x04, 0x0B, 0x16, 0x0c, 0x12, 0x18, 0x24, 0x30,
@@ -932,14 +1027,18 @@
if (pDevice->bFixRate == TRUE)
wrq->fixed = TRUE;
}
+
+ return 0;
}
/*
* Wireless Handler: set rts threshold
*/
-int iwctl_siwrts(struct net_device *dev, struct iw_param *wrq)
+int iwctl_siwrts(struct net_device *dev, struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
{
PSDevice pDevice = netdev_priv(dev);
+ struct iw_param *wrq = &wrqu->rts;
if ((wrq->value < 0 || wrq->value > 2312) && !wrq->disabled)
return -EINVAL;
@@ -956,11 +1055,12 @@
* Wireless Handler: get rts
*/
int iwctl_giwrts(struct net_device *dev, struct iw_request_info *info,
- struct iw_param *wrq, char *extra)
+ union iwreq_data *wrqu, char *extra)
{
PSDevice pDevice = netdev_priv(dev);
+ struct iw_param *wrq = &wrqu->rts;
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCGIWRTS \n");
+ DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCGIWRTS\n");
wrq->value = pDevice->wRTSThreshold;
wrq->disabled = (wrq->value >= 2312);
wrq->fixed = 1;
@@ -971,13 +1071,14 @@
* Wireless Handler: set fragment threshold
*/
int iwctl_siwfrag(struct net_device *dev, struct iw_request_info *info,
- struct iw_param *wrq, char *extra)
+ union iwreq_data *wrqu, char *extra)
{
PSDevice pDevice = netdev_priv(dev);
+ struct iw_param *wrq = &wrqu->frag;
int rc = 0;
int fthr = wrq->value;
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCSIWFRAG \n");
+ DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCSIWFRAG\n");
if (wrq->disabled)
fthr = 2312;
@@ -994,11 +1095,12 @@
* Wireless Handler: get fragment threshold
*/
int iwctl_giwfrag(struct net_device *dev, struct iw_request_info *info,
- struct iw_param *wrq, char *extra)
+ union iwreq_data *wrqu, char *extra)
{
PSDevice pDevice = netdev_priv(dev);
+ struct iw_param *wrq = &wrqu->frag;
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCGIWFRAG \n");
+ DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCGIWFRAG\n");
wrq->value = pDevice->wFragmentationThreshold;
wrq->disabled = (wrq->value >= 2312);
wrq->fixed = 1;
@@ -1009,12 +1111,13 @@
* Wireless Handler: set retry threshold
*/
int iwctl_siwretry(struct net_device *dev, struct iw_request_info *info,
- struct iw_param *wrq, char *extra)
+ union iwreq_data *wrqu, char *extra)
{
PSDevice pDevice = netdev_priv(dev);
+ struct iw_param *wrq = &wrqu->retry;
int rc = 0;
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCSIWRETRY \n");
+ DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCSIWRETRY\n");
if (wrq->disabled) {
rc = -EINVAL;
@@ -1041,10 +1144,11 @@
* Wireless Handler: get retry threshold
*/
int iwctl_giwretry(struct net_device *dev, struct iw_request_info *info,
- struct iw_param *wrq, char *extra)
+ union iwreq_data *wrqu, char *extra)
{
PSDevice pDevice = netdev_priv(dev);
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCGIWRETRY \n");
+ struct iw_param *wrq = &wrqu->retry;
+ DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCGIWRETRY\n");
wrq->disabled = 0; // Can't be disabled
// Note: by default, display the min retry number
@@ -1067,17 +1171,21 @@
* Wireless Handler: set encode mode
*/
int iwctl_siwencode(struct net_device *dev, struct iw_request_info *info,
- struct iw_point *wrq, char *extra)
+ union iwreq_data *wrqu, char *extra)
{
PSDevice pDevice = netdev_priv(dev);
PSMgmtObject pMgmt = &(pDevice->sMgmtObj);
- DWORD dwKeyIndex = (DWORD)(wrq->flags & IW_ENCODE_INDEX);
+ struct iw_point *wrq = &wrqu->encoding;
+ u32 dwKeyIndex = (u32)(wrq->flags & IW_ENCODE_INDEX);
int ii;
int uu;
int rc = 0;
int index = (wrq->flags & IW_ENCODE_INDEX);
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCSIWENCODE \n");
+ DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCSIWENCODE\n");
+
+ if (pMgmt == NULL)
+ return -EFAULT;
// Check the size of the key
if (wrq->length > WLAN_WEP232_KEYLEN) {
@@ -1155,17 +1263,17 @@
pMgmt->bShareKeyAlgorithm = FALSE;
}
-#ifdef WPA_SUPPLICANT_DRIVER_WEXT_SUPPORT
memset(pMgmt->abyDesireBSSID, 0xFF, 6);
-#endif
+
return rc;
}
int iwctl_giwencode(struct net_device *dev, struct iw_request_info *info,
- struct iw_point *wrq, char *extra)
+ union iwreq_data *wrqu, char *extra)
{
PSDevice pDevice = netdev_priv(dev);
PSMgmtObject pMgmt = &(pDevice->sMgmtObj);
+ struct iw_point *wrq = &wrqu->encoding;
char abyKey[WLAN_WEP232_KEYLEN];
unsigned index = (unsigned)(wrq->flags & IW_ENCODE_INDEX);
@@ -1173,6 +1281,9 @@
DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCGIWENCODE\n");
+ if (pMgmt == NULL)
+ return -EFAULT;
+
if (index > WLAN_WEP_NKEYS)
return -EINVAL;
if (index < 1) { // get default key
@@ -1220,13 +1331,17 @@
* Wireless Handler: set power mode
*/
int iwctl_siwpower(struct net_device *dev, struct iw_request_info *info,
- struct iw_param *wrq, char *extra)
+ union iwreq_data *wrqu, char *extra)
{
PSDevice pDevice = netdev_priv(dev);
PSMgmtObject pMgmt = &(pDevice->sMgmtObj);
+ struct iw_param *wrq = &wrqu->power;
int rc = 0;
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCSIWPOWER \n");
+ DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCSIWPOWER\n");
+
+ if (pMgmt == NULL)
+ return -EFAULT;
if (!(pDevice->flags & DEVICE_FLAGS_OPENED)) {
rc = -EINVAL;
@@ -1268,24 +1383,31 @@
* Wireless Handler: get power mode
*/
int iwctl_giwpower(struct net_device *dev, struct iw_request_info *info,
- struct iw_param *wrq, char *extra)
+ union iwreq_data *wrqu, char *extra)
{
PSDevice pDevice = netdev_priv(dev);
PSMgmtObject pMgmt = &(pDevice->sMgmtObj);
+ struct iw_param *wrq = &wrqu->power;
int mode = pDevice->ePSMode;
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCGIWPOWER \n");
+ DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCGIWPOWER\n");
+
+ if (pMgmt == NULL)
+ return -EFAULT;
if ((wrq->disabled = (mode == WMAC_POWER_CAM)))
return 0;
if ((wrq->flags & IW_POWER_TYPE) == IW_POWER_TIMEOUT) {
- wrq->value = (int)((pMgmt->wListenInterval * pMgmt->wCurrBeaconPeriod) << 10);
+ wrq->value = (int)((pMgmt->wListenInterval *
+ pMgmt->wCurrBeaconPeriod) / 100);
wrq->flags = IW_POWER_TIMEOUT;
} else {
- wrq->value = (int)((pMgmt->wListenInterval * pMgmt->wCurrBeaconPeriod) << 10);
+ wrq->value = (int)((pMgmt->wListenInterval *
+ pMgmt->wCurrBeaconPeriod) / 100);
wrq->flags = IW_POWER_PERIOD;
}
+
wrq->flags |= IW_POWER_ALL_R;
return 0;
}
@@ -1294,12 +1416,13 @@
* Wireless Handler: get Sensitivity
*/
int iwctl_giwsens(struct net_device *dev, struct iw_request_info *info,
- struct iw_param *wrq, char *extra)
+ union iwreq_data *wrqu, char *extra)
{
PSDevice pDevice = netdev_priv(dev);
+ struct iw_param *wrq = &wrqu->sens;
long ldBm;
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCGIWSENS \n");
+ DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCGIWSENS\n");
if (pDevice->bLinkPass == TRUE) {
RFvRSSITodBm(pDevice, (BYTE)(pDevice->uCurrRSSI), &ldBm);
wrq->value = ldBm;
@@ -1311,18 +1434,20 @@
return 0;
}
-#ifdef WPA_SUPPLICANT_DRIVER_WEXT_SUPPORT
-
int iwctl_siwauth(struct net_device *dev, struct iw_request_info *info,
- struct iw_param *wrq, char *extra)
+ union iwreq_data *wrqu, char *extra)
{
PSDevice pDevice = netdev_priv(dev);
PSMgmtObject pMgmt = &(pDevice->sMgmtObj);
+ struct iw_param *wrq = &wrqu->param;
int ret = 0;
static int wpa_version = 0; // must be static to save the last value, einsn liu
static int pairwise = 0;
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCSIWAUTH \n");
+ if (pMgmt == NULL)
+ return -EFAULT;
+
+ DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCSIWAUTH\n");
switch (wrq->flags & IW_AUTH_INDEX) {
case IW_AUTH_WPA_VERSION:
wpa_version = wrq->value;
@@ -1406,6 +1531,7 @@
}
break;
default:
+ PRINT_K("iwctl_siwauth: not supported %x\n", wrq->flags);
ret = -EOPNOTSUPP;
break;
}
@@ -1413,18 +1539,22 @@
}
int iwctl_giwauth(struct net_device *dev, struct iw_request_info *info,
- struct iw_param *wrq, char *extra)
+ union iwreq_data *wrqu, char *extra)
{
return -EOPNOTSUPP;
}
int iwctl_siwgenie(struct net_device *dev, struct iw_request_info *info,
- struct iw_point *wrq, char *extra)
+ union iwreq_data *wrqu, char *extra)
{
PSDevice pDevice = netdev_priv(dev);
PSMgmtObject pMgmt = &(pDevice->sMgmtObj);
+ struct iw_point *wrq = &wrqu->data;
int ret = 0;
+ if (pMgmt == NULL)
+ return -EFAULT;
+
if (wrq->length){
if ((wrq->length < 2) || (extra[1] + 2 != wrq->length)) {
ret = -EINVAL;
@@ -1450,13 +1580,17 @@
}
int iwctl_giwgenie(struct net_device *dev, struct iw_request_info *info,
- struct iw_point *wrq, char *extra)
+ union iwreq_data *wrqu, char *extra)
{
PSDevice pDevice = netdev_priv(dev);
PSMgmtObject pMgmt = &(pDevice->sMgmtObj);
+ struct iw_point *wrq = &wrqu->data;
int ret = 0;
int space = wrq->length;
+ if (pMgmt == NULL)
+ return -EFAULT;
+
wrq->length = 0;
if (pMgmt->wWPAIELen > 0) {
wrq->length = pMgmt->wWPAIELen;
@@ -1472,10 +1606,11 @@
}
int iwctl_siwencodeext(struct net_device *dev, struct iw_request_info *info,
- struct iw_point *wrq, char *extra)
+ union iwreq_data *wrqu, char *extra)
{
PSDevice pDevice = netdev_priv(dev);
PSMgmtObject pMgmt = &(pDevice->sMgmtObj);
+ struct iw_point *wrq = &wrqu->encoding;
struct iw_encode_ext *ext = (struct iw_encode_ext*)extra;
struct viawget_wpa_param *param=NULL;
// original member
@@ -1488,17 +1623,18 @@
size_t seq_len = 0;
size_t key_len = 0;
u8 *buf;
- size_t blen;
u8 key_array[64];
int ret = 0;
- PRINT_K("SIOCSIWENCODEEXT...... \n");
+ PRINT_K("SIOCSIWENCODEEXT......\n");
- blen = sizeof(*param);
- buf = kmalloc((int)blen, (int)GFP_KERNEL);
+ if (pMgmt == NULL)
+ return -EFAULT;
+
+ buf = kzalloc(sizeof(struct viawget_wpa_param), GFP_KERNEL);
if (buf == NULL)
return -ENOMEM;
- memset(buf, 0, blen);
+
param = (struct viawget_wpa_param *)buf;
// recover alg_name
@@ -1588,28 +1724,33 @@
}
/*******/
spin_lock_irq(&pDevice->lock);
- ret = wpa_set_keys(pDevice, param, TRUE);
+ ret = wpa_set_keys(pDevice, param);
spin_unlock_irq(&pDevice->lock);
error:
- kfree(param);
+ kfree(buf);
return ret;
}
int iwctl_giwencodeext(struct net_device *dev, struct iw_request_info *info,
- struct iw_point *wrq, char *extra)
+ union iwreq_data *wrqu, char *extra)
{
return -EOPNOTSUPP;
}
int iwctl_siwmlme(struct net_device *dev, struct iw_request_info *info,
- struct iw_point *wrq, char *extra)
+ union iwreq_data *wrqu, char *extra)
{
PSDevice pDevice = netdev_priv(dev);
PSMgmtObject pMgmt = &(pDevice->sMgmtObj);
struct iw_mlme *mlme = (struct iw_mlme *)extra;
int ret = 0;
+ DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCSIWMLME\n");
+
+ if (pMgmt == NULL)
+ return -EFAULT;
+
if (memcmp(pMgmt->abyCurrBSSID, mlme->addr.sa_data, ETH_ALEN)) {
ret = -EINVAL;
return ret;
@@ -1629,81 +1770,62 @@
return ret;
}
-#endif
+static int iwctl_config_commit(struct net_device *dev,
+ struct iw_request_info *info, union iwreq_data *wrqu, char *extra)
+{
+ DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "SIOCSIWCOMMIT\n");
+
+ return 0;
+}
static const iw_handler iwctl_handler[] = {
- (iw_handler)NULL, // SIOCSIWCOMMIT
- (iw_handler)NULL, // SIOCGIWNAME
- (iw_handler)NULL, // SIOCSIWNWID
- (iw_handler)NULL, // SIOCGIWNWID
- (iw_handler)NULL, // SIOCSIWFREQ
- (iw_handler)NULL, // SIOCGIWFREQ
- (iw_handler)NULL, // SIOCSIWMODE
- (iw_handler)NULL, // SIOCGIWMODE
- (iw_handler)NULL, // SIOCSIWSENS
- (iw_handler)NULL, // SIOCGIWSENS
- (iw_handler)NULL, // SIOCSIWRANGE
- (iw_handler)iwctl_giwrange, // SIOCGIWRANGE
- (iw_handler)NULL, // SIOCSIWPRIV
- (iw_handler)NULL, // SIOCGIWPRIV
- (iw_handler)NULL, // SIOCSIWSTATS
- (iw_handler)NULL, // SIOCGIWSTATS
- (iw_handler)NULL, // SIOCSIWSPY
- (iw_handler)NULL, // SIOCGIWSPY
- (iw_handler)NULL, // -- hole --
- (iw_handler)NULL, // -- hole --
- (iw_handler)NULL, // SIOCSIWAP
- (iw_handler)NULL, // SIOCGIWAP
- (iw_handler)NULL, // -- hole -- 0x16
- (iw_handler)NULL, // SIOCGIWAPLIST
- (iw_handler)iwctl_siwscan, // SIOCSIWSCAN
- (iw_handler)iwctl_giwscan, // SIOCGIWSCAN
- (iw_handler)NULL, // SIOCSIWESSID
- (iw_handler)NULL, // SIOCGIWESSID
- (iw_handler)NULL, // SIOCSIWNICKN
- (iw_handler)NULL, // SIOCGIWNICKN
- (iw_handler)NULL, // -- hole --
- (iw_handler)NULL, // -- hole --
- (iw_handler)NULL, // SIOCSIWRATE 0x20
- (iw_handler)NULL, // SIOCGIWRATE
- (iw_handler)NULL, // SIOCSIWRTS
- (iw_handler)NULL, // SIOCGIWRTS
- (iw_handler)NULL, // SIOCSIWFRAG
- (iw_handler)NULL, // SIOCGIWFRAG
- (iw_handler)NULL, // SIOCSIWTXPOW
- (iw_handler)NULL, // SIOCGIWTXPOW
- (iw_handler)NULL, // SIOCSIWRETRY
- (iw_handler)NULL, // SIOCGIWRETRY
- (iw_handler)NULL, // SIOCSIWENCODE
- (iw_handler)NULL, // SIOCGIWENCODE
- (iw_handler)NULL, // SIOCSIWPOWER
- (iw_handler)NULL, // SIOCGIWPOWER
- (iw_handler)NULL, // -- hole --
- (iw_handler)NULL, // -- hole --
- (iw_handler)NULL, // SIOCSIWGENIE
- (iw_handler)NULL, // SIOCGIWGENIE
- (iw_handler)NULL, // SIOCSIWAUTH
- (iw_handler)NULL, // SIOCGIWAUTH
- (iw_handler)NULL, // SIOCSIWENCODEEXT
- (iw_handler)NULL, // SIOCGIWENCODEEXT
- (iw_handler)NULL, // SIOCSIWPMKSA
- (iw_handler)NULL, // -- hole --
+ IW_HANDLER(SIOCSIWCOMMIT, iwctl_config_commit),
+ IW_HANDLER(SIOCGIWNAME, iwctl_giwname),
+ IW_HANDLER(SIOCSIWFREQ, iwctl_siwfreq),
+ IW_HANDLER(SIOCGIWFREQ, iwctl_giwfreq),
+ IW_HANDLER(SIOCSIWMODE, iwctl_siwmode),
+ IW_HANDLER(SIOCGIWMODE, iwctl_giwmode),
+ IW_HANDLER(SIOCGIWSENS, iwctl_giwsens),
+ IW_HANDLER(SIOCGIWRANGE, iwctl_giwrange),
+ IW_HANDLER(SIOCSIWAP, iwctl_siwap),
+ IW_HANDLER(SIOCGIWAP, iwctl_giwap),
+ IW_HANDLER(SIOCSIWMLME, iwctl_siwmlme),
+ IW_HANDLER(SIOCGIWAPLIST, iwctl_giwaplist),
+ IW_HANDLER(SIOCSIWSCAN, iwctl_siwscan),
+ IW_HANDLER(SIOCGIWSCAN, iwctl_giwscan),
+ IW_HANDLER(SIOCSIWESSID, iwctl_siwessid),
+ IW_HANDLER(SIOCGIWESSID, iwctl_giwessid),
+ IW_HANDLER(SIOCSIWRATE, iwctl_siwrate),
+ IW_HANDLER(SIOCGIWRATE, iwctl_giwrate),
+ IW_HANDLER(SIOCSIWRTS, iwctl_siwrts),
+ IW_HANDLER(SIOCGIWRTS, iwctl_giwrts),
+ IW_HANDLER(SIOCSIWFRAG, iwctl_siwfrag),
+ IW_HANDLER(SIOCGIWFRAG, iwctl_giwfrag),
+ IW_HANDLER(SIOCSIWRETRY, iwctl_siwretry),
+ IW_HANDLER(SIOCGIWRETRY, iwctl_giwretry),
+ IW_HANDLER(SIOCSIWENCODE, iwctl_siwencode),
+ IW_HANDLER(SIOCGIWENCODE, iwctl_giwencode),
+ IW_HANDLER(SIOCSIWPOWER, iwctl_siwpower),
+ IW_HANDLER(SIOCGIWPOWER, iwctl_giwpower),
+ IW_HANDLER(SIOCSIWGENIE, iwctl_siwgenie),
+ IW_HANDLER(SIOCGIWGENIE, iwctl_giwgenie),
+ IW_HANDLER(SIOCSIWMLME, iwctl_siwmlme),
+ IW_HANDLER(SIOCSIWAUTH, iwctl_siwauth),
+ IW_HANDLER(SIOCGIWAUTH, iwctl_giwauth),
+ IW_HANDLER(SIOCSIWENCODEEXT, iwctl_siwencodeext),
+ IW_HANDLER(SIOCGIWENCODEEXT, iwctl_giwencodeext)
};
static const iw_handler iwctl_private_handler[] = {
NULL, // SIOCIWFIRSTPRIV
};
-struct iw_priv_args iwctl_private_args[] = {
- { IOCTL_CMD_SET, IW_PRIV_TYPE_CHAR | 1024, 0, "set" },
-};
-
const struct iw_handler_def iwctl_handler_def = {
.get_wireless_stats = &iwctl_get_wireless_stats,
- .num_standard = sizeof(iwctl_handler) / sizeof(iw_handler),
+ .num_standard = ARRAY_SIZE(iwctl_handler),
.num_private = 0,
.num_private_args = 0,
- .standard = (iw_handler *)iwctl_handler,
+ .standard = iwctl_handler,
.private = NULL,
.private_args = NULL,
};
diff --git a/drivers/staging/vt6656/iwctl.h b/drivers/staging/vt6656/iwctl.h
index d056f83..b594a10 100644
--- a/drivers/staging/vt6656/iwctl.h
+++ b/drivers/staging/vt6656/iwctl.h
@@ -42,106 +42,105 @@
struct iw_statistics *iwctl_get_wireless_stats(struct net_device *dev);
int iwctl_siwap(struct net_device *dev, struct iw_request_info *info,
- struct sockaddr *wrq, char *extra);
+ union iwreq_data *wrqu, char *extra);
-void iwctl_giwrange(struct net_device *dev, struct iw_request_info *info,
- struct iw_point *wrq, char *extra);
+int iwctl_giwrange(struct net_device *dev, struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra);
-void iwctl_giwmode(struct net_device *dev, struct iw_request_info *info,
- __u32 *wmode, char *extra);
+int iwctl_giwmode(struct net_device *dev, struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra);
int iwctl_siwmode(struct net_device *dev, struct iw_request_info *info,
- __u32 *wmode, char *extra);
+ union iwreq_data *wrqu, char *extra);
int iwctl_giwfreq(struct net_device *dev, struct iw_request_info *info,
- struct iw_freq *wrq, char *extra);
+ union iwreq_data *wrqu, char *extra);
int iwctl_siwfreq(struct net_device *dev, struct iw_request_info *info,
- struct iw_freq *wrq, char *extra);
+ union iwreq_data *wrqu, char *extra);
int iwctl_giwname(struct net_device *dev, struct iw_request_info *info,
- char *wrq, char *extra);
+ union iwreq_data *wrqu, char *extra);
int iwctl_giwsens(struct net_device *dev, struct iw_request_info *info,
- struct iw_param *wrq, char *extra);
+ union iwreq_data *wrqu, char *extra);
int iwctl_giwap(struct net_device *dev, struct iw_request_info *info,
- struct sockaddr *wrq, char *extra);
+ union iwreq_data *wrqu, char *extra);
int iwctl_giwaplist(struct net_device *dev, struct iw_request_info *info,
- struct iw_point *wrq, char *extra);
+ union iwreq_data *wrqu, char *extra);
int iwctl_siwessid(struct net_device *dev, struct iw_request_info *info,
- struct iw_point *wrq, char *extra);
+ union iwreq_data *wrqu, char *extra);
-void iwctl_giwessid(struct net_device *dev, struct iw_request_info *info,
- struct iw_point *wrq, char *extra);
+int iwctl_giwessid(struct net_device *dev, struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra);
int iwctl_siwrate(struct net_device *dev, struct iw_request_info *info,
- struct iw_param *wrq, char *extra);
+ union iwreq_data *wrqu, char *extra);
-void iwctl_giwrate(struct net_device *dev, struct iw_request_info *info,
- struct iw_param *wrq, char *extra);
+int iwctl_giwrate(struct net_device *dev, struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra);
-int iwctl_siwrts(struct net_device *dev, struct iw_param *wrq);
+int iwctl_siwrts(struct net_device *dev, struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra);
int iwctl_giwrts(struct net_device *dev, struct iw_request_info *info,
- struct iw_param *wrq, char *extra);
+ union iwreq_data *wrqu, char *extra);
int iwctl_siwfrag(struct net_device *dev, struct iw_request_info *info,
- struct iw_param *wrq, char *extra);
+ union iwreq_data *wrqu, char *extra);
int iwctl_giwfrag(struct net_device *dev, struct iw_request_info *info,
- struct iw_param *wrq, char *extra);
+ union iwreq_data *wrqu, char *extra);
int iwctl_siwretry(struct net_device *dev, struct iw_request_info *info,
- struct iw_param *wrq, char *extra);
+ union iwreq_data *wrqu, char *extra);
int iwctl_giwretry(struct net_device *dev, struct iw_request_info *info,
- struct iw_param *wrq, char *extra);
+ union iwreq_data *wrqu, char *extra);
int iwctl_siwencode(struct net_device *dev, struct iw_request_info *info,
- struct iw_point *wrq, char *extra);
+ union iwreq_data *wrqu, char *extra);
int iwctl_giwencode(struct net_device *dev, struct iw_request_info *info,
- struct iw_point *wrq, char *extra);
+ union iwreq_data *wrqu, char *extra);
int iwctl_siwpower(struct net_device *dev, struct iw_request_info *info,
- struct iw_param *wrq, char *extra);
+ union iwreq_data *wrqu, char *extra);
int iwctl_giwpower(struct net_device *dev, struct iw_request_info *info,
- struct iw_param *wrq, char *extra);
+ union iwreq_data *wrqu, char *extra);
int iwctl_giwscan(struct net_device *dev, struct iw_request_info *info,
- struct iw_point *wrq, char *extra);
+ union iwreq_data *wrqu, char *extra);
int iwctl_siwscan(struct net_device *dev, struct iw_request_info *info,
- struct iw_param *wrq, char *extra);
+ union iwreq_data *wrqu, char *extra);
-#ifdef WPA_SUPPLICANT_DRIVER_WEXT_SUPPORT
int iwctl_siwauth(struct net_device *dev, struct iw_request_info *info,
- struct iw_param *wrq, char *extra);
+ union iwreq_data *wrqu, char *extra);
int iwctl_giwauth(struct net_device *dev, struct iw_request_info *info,
- struct iw_param *wrq, char *extra);
+ union iwreq_data *wrqu, char *extra);
int iwctl_siwgenie(struct net_device *dev, struct iw_request_info *info,
- struct iw_point *wrq, char *extra);
+ union iwreq_data *wrqu, char *extra);
int iwctl_giwgenie(struct net_device *dev, struct iw_request_info *info,
- struct iw_point *wrq, char *extra);
+ union iwreq_data *wrqu, char *extra);
int iwctl_siwencodeext(struct net_device *dev, struct iw_request_info *info,
- struct iw_point *wrq, char *extra);
+ union iwreq_data *wrqu, char *extra);
int iwctl_giwencodeext(struct net_device *dev, struct iw_request_info *info,
- struct iw_point *wrq, char *extra);
+ union iwreq_data *wrqu, char *extra);
int iwctl_siwmlme(struct net_device *dev, struct iw_request_info *info,
- struct iw_point *wrq, char *extra);
-#endif // #ifdef WPA_SUPPLICANT_DRIVER_WEXT_SUPPORT
+ union iwreq_data *wrqu, char *extra);
extern const struct iw_handler_def iwctl_handler_def;
-extern const struct iw_priv_args iwctl_private_args;
+extern const struct iw_priv_args iwctl_priv_args;
#endif /* __IWCTL_H__ */
diff --git a/drivers/staging/vt6656/key.c b/drivers/staging/vt6656/key.c
index a61fcb9..8c78b86 100644
--- a/drivers/staging/vt6656/key.c
+++ b/drivers/staging/vt6656/key.c
@@ -36,9 +36,9 @@
*
*/
+#include "mac.h"
#include "tmacro.h"
#include "key.h"
-#include "mac.h"
#include "rndis.h"
#include "control.h"
@@ -223,7 +223,7 @@
PSKeyManagement pTable,
PBYTE pbyBSSID,
DWORD dwKeyIndex,
- unsigned long uKeyLength,
+ u32 uKeyLength,
PQWORD pKeyRSC,
PBYTE pbyKey,
BYTE byKeyDecMode
@@ -235,7 +235,8 @@
PSKeyItem pKey;
unsigned int uKeyIdx;
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Enter KeybSetKey: %lX\n", dwKeyIndex);
+ DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO
+ "Enter KeybSetKey: %X\n", dwKeyIndex);
j = (MAX_KEY_TABLE-1);
for (i=0;i<(MAX_KEY_TABLE-1);i++) {
@@ -261,7 +262,9 @@
if ((dwKeyIndex & TRANSMIT_KEY) != 0) {
// Group transmit key
pTable->KeyTable[i].dwGTKeyIndex = dwKeyIndex;
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Group transmit key(R)[%lX]: %d\n", pTable->KeyTable[i].dwGTKeyIndex, i);
+ DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO
+ "Group transmit key(R)[%X]: %d\n",
+ pTable->KeyTable[i].dwGTKeyIndex, i);
}
pTable->KeyTable[i].wKeyCtl &= 0xFF0F; // clear group key control filed
pTable->KeyTable[i].wKeyCtl |= (byKeyDecMode << 4);
@@ -302,9 +305,12 @@
}
DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"\n");
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"pKey->dwTSC47_16: %lx\n ", pKey->dwTSC47_16);
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"pKey->wTSC15_0: %x\n ", pKey->wTSC15_0);
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"pKey->dwKeyIndex: %lx\n ", pKey->dwKeyIndex);
+ DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"pKey->dwTSC47_16: %x\n ",
+ pKey->dwTSC47_16);
+ DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"pKey->wTSC15_0: %x\n ",
+ pKey->wTSC15_0);
+ DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"pKey->dwKeyIndex: %x\n ",
+ pKey->dwKeyIndex);
return (TRUE);
}
@@ -326,7 +332,9 @@
if ((dwKeyIndex & TRANSMIT_KEY) != 0) {
// Group transmit key
pTable->KeyTable[j].dwGTKeyIndex = dwKeyIndex;
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Group transmit key(N)[%lX]: %d\n", pTable->KeyTable[j].dwGTKeyIndex, j);
+ DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO
+ "Group transmit key(N)[%X]: %d\n",
+ pTable->KeyTable[j].dwGTKeyIndex, j);
}
pTable->KeyTable[j].wKeyCtl &= 0xFF0F; // clear group key control filed
pTable->KeyTable[j].wKeyCtl |= (byKeyDecMode << 4);
@@ -367,9 +375,11 @@
}
DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"\n");
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"pKey->dwTSC47_16: %lx\n ", pKey->dwTSC47_16);
+ DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"pKey->dwTSC47_16: %x\n ",
+ pKey->dwTSC47_16);
DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"pKey->wTSC15_0: %x\n ", pKey->wTSC15_0);
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"pKey->dwKeyIndex: %lx\n ", pKey->dwKeyIndex);
+ DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"pKey->dwKeyIndex: %x\n ",
+ pKey->dwKeyIndex);
return (TRUE);
}
@@ -597,7 +607,8 @@
DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"%x ", pTable->KeyTable[i].abyBSSID[ii]);
}
DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"\n");
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"dwGTKeyIndex: %lX\n", pTable->KeyTable[i].dwGTKeyIndex);
+ DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"dwGTKeyIndex: %X\n",
+ pTable->KeyTable[i].dwGTKeyIndex);
return (TRUE);
}
@@ -664,7 +675,7 @@
void *pDeviceHandler,
PSKeyManagement pTable,
DWORD dwKeyIndex,
- unsigned long uKeyLength,
+ u32 uKeyLength,
PQWORD pKeyRSC,
PBYTE pbyKey,
BYTE byKeyDecMode
@@ -696,7 +707,10 @@
if ((dwKeyIndex & TRANSMIT_KEY) != 0) {
// Group transmit key
pTable->KeyTable[MAX_KEY_TABLE-1].dwGTKeyIndex = dwKeyIndex;
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Group transmit key(R)[%lX]: %d\n", pTable->KeyTable[MAX_KEY_TABLE-1].dwGTKeyIndex, MAX_KEY_TABLE-1);
+ DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO
+ "Group transmit key(R)[%X]: %d\n",
+ pTable->KeyTable[MAX_KEY_TABLE-1].dwGTKeyIndex,
+ MAX_KEY_TABLE-1);
}
pTable->KeyTable[MAX_KEY_TABLE-1].wKeyCtl &= 0x7F00; // clear all key control filed
@@ -747,9 +761,11 @@
}
DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"\n");
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"pKey->dwTSC47_16: %lx\n", pKey->dwTSC47_16);
+ DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"pKey->dwTSC47_16: %x\n",
+ pKey->dwTSC47_16);
DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"pKey->wTSC15_0: %x\n", pKey->wTSC15_0);
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"pKey->dwKeyIndex: %lx\n", pKey->dwKeyIndex);
+ DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"pKey->dwKeyIndex: %x\n",
+ pKey->dwKeyIndex);
return (TRUE);
}
@@ -775,7 +791,7 @@
void *pDeviceHandler,
PSKeyManagement pTable,
DWORD dwKeyIndex,
- unsigned long uKeyLength,
+ u32 uKeyLength,
PQWORD pKeyRSC,
PBYTE pbyKey,
BYTE byKeyDecMode
@@ -787,7 +803,8 @@
PSKeyItem pKey;
unsigned int uKeyIdx;
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Enter KeybSetAllGroupKey: %lX\n", dwKeyIndex);
+ DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Enter KeybSetAllGroupKey: %X\n",
+ dwKeyIndex);
if ((dwKeyIndex & PAIRWISE_KEY) != 0) { // Pairwise key
@@ -804,7 +821,9 @@
if ((dwKeyIndex & TRANSMIT_KEY) != 0) {
// Group transmit key
pTable->KeyTable[i].dwGTKeyIndex = dwKeyIndex;
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Group transmit key(R)[%lX]: %d\n", pTable->KeyTable[i].dwGTKeyIndex, i);
+ DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO
+ "Group transmit key(R)[%X]: %d\n",
+ pTable->KeyTable[i].dwGTKeyIndex, i);
}
pTable->KeyTable[i].wKeyCtl &= 0xFF0F; // clear group key control filed
diff --git a/drivers/staging/vt6656/key.h b/drivers/staging/vt6656/key.h
index f749c7a..bd35d39 100644
--- a/drivers/staging/vt6656/key.h
+++ b/drivers/staging/vt6656/key.h
@@ -58,7 +58,7 @@
typedef struct tagSKeyItem
{
BOOL bKeyValid;
- unsigned long uKeyLength;
+ u32 uKeyLength;
BYTE abyKey[MAX_KEY_LEN];
QWORD KeyRSC;
DWORD dwTSC47_16;
@@ -107,7 +107,7 @@
PSKeyManagement pTable,
PBYTE pbyBSSID,
DWORD dwKeyIndex,
- unsigned long uKeyLength,
+ u32 uKeyLength,
PQWORD pKeyRSC,
PBYTE pbyKey,
BYTE byKeyDecMode
@@ -146,7 +146,7 @@
void *pDeviceHandler,
PSKeyManagement pTable,
DWORD dwKeyIndex,
- unsigned long uKeyLength,
+ u32 uKeyLength,
PQWORD pKeyRSC,
PBYTE pbyKey,
BYTE byKeyDecMode
@@ -156,7 +156,7 @@
void *pDeviceHandler,
PSKeyManagement pTable,
DWORD dwKeyIndex,
- unsigned long uKeyLength,
+ u32 uKeyLength,
PQWORD pKeyRSC,
PBYTE pbyKey,
BYTE byKeyDecMode
diff --git a/drivers/staging/vt6656/mac.c b/drivers/staging/vt6656/mac.c
index af4a29d..8fddc7b 100644
--- a/drivers/staging/vt6656/mac.c
+++ b/drivers/staging/vt6656/mac.c
@@ -260,7 +260,8 @@
dwData1 <<= 16;
dwData1 |= MAKEWORD(*(pbyAddr+4), *(pbyAddr+5));
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"1. wOffset: %d, Data: %lX, KeyCtl:%X\n", wOffset, dwData1, wKeyCtl);
+ DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"1. wOffset: %d, Data: %X,"\
+ " KeyCtl:%X\n", wOffset, dwData1, wKeyCtl);
//VNSvOutPortW(dwIoBase + MAC_REG_MISCFFNDEX, wOffset);
//VNSvOutPortD(dwIoBase + MAC_REG_MISCFFDATA, dwData);
@@ -277,7 +278,8 @@
dwData2 <<= 8;
dwData2 |= *(pbyAddr+0);
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"2. wOffset: %d, Data: %lX\n", wOffset, dwData2);
+ DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"2. wOffset: %d, Data: %X\n",
+ wOffset, dwData2);
//VNSvOutPortW(dwIoBase + MAC_REG_MISCFFNDEX, wOffset);
//VNSvOutPortD(dwIoBase + MAC_REG_MISCFFDATA, dwData);
diff --git a/drivers/staging/vt6656/main_usb.c b/drivers/staging/vt6656/main_usb.c
index ad422de..f33086d 100644
--- a/drivers/staging/vt6656/main_usb.c
+++ b/drivers/staging/vt6656/main_usb.c
@@ -61,7 +61,6 @@
#include "bssdb.h"
#include "hostap.h"
#include "wpactl.h"
-#include "ioctl.h"
#include "iwctl.h"
#include "dpc.h"
#include "datarate.h"
@@ -244,7 +243,6 @@
unsigned char *dest,
unsigned char *source);
-static BOOL device_release_WPADEV(PSDevice pDevice);
static void usb_device_reset(PSDevice pDevice);
@@ -634,40 +632,6 @@
return TRUE;
}
-static BOOL device_release_WPADEV(PSDevice pDevice)
-{
- viawget_wpa_header *wpahdr;
- int ii=0;
- // wait_queue_head_t Set_wait;
- //send device close to wpa_supplicant layer
- if (pDevice->bWPADEVUp==TRUE) {
- wpahdr = (viawget_wpa_header *)pDevice->skb->data;
- wpahdr->type = VIAWGET_DEVICECLOSE_MSG;
- wpahdr->resp_ie_len = 0;
- wpahdr->req_ie_len = 0;
- skb_put(pDevice->skb, sizeof(viawget_wpa_header));
- pDevice->skb->dev = pDevice->wpadev;
- skb_reset_mac_header(pDevice->skb);
- pDevice->skb->pkt_type = PACKET_HOST;
- pDevice->skb->protocol = htons(ETH_P_802_2);
- memset(pDevice->skb->cb, 0, sizeof(pDevice->skb->cb));
- netif_rx(pDevice->skb);
- pDevice->skb = dev_alloc_skb((int)pDevice->rx_buf_sz);
-
- //wait release WPADEV
- // init_waitqueue_head(&Set_wait);
- // wait_event_timeout(Set_wait, ((pDevice->wpadev==NULL)&&(pDevice->skb == NULL)),5*HZ); //1s wait
- while(pDevice->bWPADEVUp==TRUE) {
- set_current_state(TASK_UNINTERRUPTIBLE);
- schedule_timeout (HZ/20); //wait 50ms
- ii++;
- if(ii>20)
- break;
- }
- }
- return TRUE;
-}
-
#ifdef CONFIG_PM /* Minimal support for suspend and resume */
static int vt6656_suspend(struct usb_interface *intf, pm_message_t message)
@@ -711,7 +675,7 @@
.ndo_set_rx_mode = device_set_multi,
};
-static int __devinit
+static int
vt6656_probe(struct usb_interface *intf, const struct usb_device_id *id)
{
u8 fake_mac[ETH_ALEN] = {0x00, 0x00, 0x00, 0x00, 0x00, 0x01};
@@ -758,17 +722,6 @@
usb_device_reset(pDevice);
- {
- union iwreq_data wrqu;
- memset(&wrqu, 0, sizeof(wrqu));
- wrqu.data.flags = RT_INSMOD_EVENT_FLAG;
- wrqu.data.length = IFNAMSIZ;
- wireless_send_event(pDevice->dev,
- IWEVCUSTOM,
- &wrqu,
- pDevice->dev->name);
- }
-
return 0;
err_netdev:
@@ -991,12 +944,6 @@
static int device_open(struct net_device *dev) {
PSDevice pDevice=(PSDevice) netdev_priv(dev);
- extern SWPAResult wpa_Result;
- memset(wpa_Result.ifname,0,sizeof(wpa_Result.ifname));
- wpa_Result.proto = 0;
- wpa_Result.key_mgmt = 0;
- wpa_Result.eap_type = 0;
- wpa_Result.authenticated = FALSE;
pDevice->fWPA_Authened = FALSE;
DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO " device_open...\n");
@@ -1056,13 +1003,11 @@
pDevice->bEventAvailable = FALSE;
pDevice->bWPADEVUp = FALSE;
-#ifdef WPA_SUPPLICANT_DRIVER_WEXT_SUPPORT
pDevice->bwextstep0 = FALSE;
pDevice->bwextstep1 = FALSE;
pDevice->bwextstep2 = FALSE;
pDevice->bwextstep3 = FALSE;
pDevice->bWPASuppWextEnabled = FALSE;
-#endif
pDevice->byReAssocCount = 0;
RXvWorkItem(pDevice);
@@ -1096,15 +1041,8 @@
netif_stop_queue(pDevice->dev);
pDevice->flags |= DEVICE_FLAGS_OPENED;
-{
- union iwreq_data wrqu;
- memset(&wrqu, 0, sizeof(wrqu));
- wrqu.data.flags = RT_UPDEV_EVENT_FLAG;
- wireless_send_event(pDevice->dev, IWEVCUSTOM, &wrqu, NULL);
-}
-
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "device_open success.. \n");
- return 0;
+ DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "device_open success..\n");
+ return 0;
free_all:
device_free_frag_bufs(pDevice);
@@ -1133,19 +1071,11 @@
if (pDevice == NULL)
return -ENODEV;
-{
- union iwreq_data wrqu;
- memset(&wrqu, 0, sizeof(wrqu));
- wrqu.data.flags = RT_DOWNDEV_EVENT_FLAG;
- wireless_send_event(pDevice->dev, IWEVCUSTOM, &wrqu, NULL);
-}
-
if (pDevice->bLinkPass) {
bScheduleCommand((void *) pDevice, WLAN_CMD_DISASSOCIATE, NULL);
mdelay(30);
}
-device_release_WPADEV(pDevice);
memset(pMgmt->abyDesireSSID, 0, WLAN_IEHDR_LEN + WLAN_SSID_MAXLEN + 1);
pMgmt->bShareKeyAlgorithm = FALSE;
@@ -1204,22 +1134,13 @@
return 0;
}
-static void __devexit vt6656_disconnect(struct usb_interface *intf)
+static void vt6656_disconnect(struct usb_interface *intf)
{
PSDevice device = usb_get_intfdata(intf);
if (!device)
return;
- {
- union iwreq_data req;
- memset(&req, 0, sizeof(req));
- req.data.flags = RT_RMMOD_EVENT_FLAG;
- wireless_send_event(device->dev, IWEVCUSTOM, &req, NULL);
- }
-
- device_release_WPADEV(device);
- release_firmware(device->firmware);
usb_set_intfdata(intf, NULL);
usb_put_dev(interface_to_usbdev(intf));
@@ -1228,9 +1149,9 @@
if (device->dev) {
unregister_netdev(device->dev);
- wpa_set_wpadev(device, 0);
free_netdev(device->dev);
}
+
}
static int device_dma0_tx_80211(struct sk_buff *skb, struct net_device *dev)
@@ -1549,470 +1470,35 @@
}
-
-static struct net_device_stats *device_get_stats(struct net_device *dev) {
+static struct net_device_stats *device_get_stats(struct net_device *dev)
+{
PSDevice pDevice=(PSDevice) netdev_priv(dev);
return &pDevice->stats;
}
-
-static int device_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) {
- PSDevice pDevice = (PSDevice)netdev_priv(dev);
- PSMgmtObject pMgmt = &(pDevice->sMgmtObj);
- PSCmdRequest pReq;
- //BOOL bCommit = FALSE;
+static int device_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+ PSDevice pDevice = (PSDevice)netdev_priv(dev);
struct iwreq *wrq = (struct iwreq *) rq;
- int rc =0;
+ int rc = 0;
- if (pMgmt == NULL) {
- rc = -EFAULT;
- return rc;
- }
+ switch (cmd) {
- switch(cmd) {
+ case IOCTL_CMD_HOSTAPD:
- case SIOCGIWNAME:
- rc = iwctl_giwname(dev, NULL, (char *)&(wrq->u.name), NULL);
- break;
-
- case SIOCSIWNWID:
- case SIOCGIWNWID: //0x8b03 support
- rc = -EOPNOTSUPP;
- break;
-
- // Set frequency/channel
- case SIOCSIWFREQ:
- rc = iwctl_siwfreq(dev, NULL, &(wrq->u.freq), NULL);
- break;
-
- // Get frequency/channel
- case SIOCGIWFREQ:
- rc = iwctl_giwfreq(dev, NULL, &(wrq->u.freq), NULL);
- break;
-
- // Set desired network name (ESSID)
- case SIOCSIWESSID:
-
- {
- char essid[IW_ESSID_MAX_SIZE+1];
- if (wrq->u.essid.length > IW_ESSID_MAX_SIZE) {
- rc = -E2BIG;
- break;
- }
- if (copy_from_user(essid, wrq->u.essid.pointer,
- wrq->u.essid.length)) {
- rc = -EFAULT;
- break;
- }
- rc = iwctl_siwessid(dev, NULL,
- &(wrq->u.essid), essid);
- }
- break;
-
-
- // Get current network name (ESSID)
- case SIOCGIWESSID:
-
- {
- char essid[IW_ESSID_MAX_SIZE+1];
- if (wrq->u.essid.pointer) {
- iwctl_giwessid(dev, NULL,
- &(wrq->u.essid), essid);
- if (copy_to_user(wrq->u.essid.pointer,
- essid,
- wrq->u.essid.length) )
- rc = -EFAULT;
- }
- }
- break;
-
- case SIOCSIWAP:
-
- rc = iwctl_siwap(dev, NULL, &(wrq->u.ap_addr), NULL);
- break;
-
-
- // Get current Access Point (BSSID)
- case SIOCGIWAP:
- rc = iwctl_giwap(dev, NULL, &(wrq->u.ap_addr), NULL);
- break;
-
-
- // Set desired station name
- case SIOCSIWNICKN:
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCSIWNICKN \n");
- rc = -EOPNOTSUPP;
- break;
-
- // Get current station name
- case SIOCGIWNICKN:
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCGIWNICKN \n");
- rc = -EOPNOTSUPP;
- break;
-
- // Set the desired bit-rate
- case SIOCSIWRATE:
- rc = iwctl_siwrate(dev, NULL, &(wrq->u.bitrate), NULL);
- break;
-
- // Get the current bit-rate
- case SIOCGIWRATE:
- iwctl_giwrate(dev, NULL, &(wrq->u.bitrate), NULL);
- break;
-
- // Set the desired RTS threshold
- case SIOCSIWRTS:
-
- rc = iwctl_siwrts(dev, &(wrq->u.rts));
- break;
-
- // Get the current RTS threshold
- case SIOCGIWRTS:
-
- rc = iwctl_giwrts(dev, NULL, &(wrq->u.rts), NULL);
- break;
-
- // Set the desired fragmentation threshold
- case SIOCSIWFRAG:
-
- rc = iwctl_siwfrag(dev, NULL, &(wrq->u.frag), NULL);
- break;
-
- // Get the current fragmentation threshold
- case SIOCGIWFRAG:
-
- rc = iwctl_giwfrag(dev, NULL, &(wrq->u.frag), NULL);
- break;
-
- // Set mode of operation
- case SIOCSIWMODE:
- rc = iwctl_siwmode(dev, NULL, &(wrq->u.mode), NULL);
- break;
-
- // Get mode of operation
- case SIOCGIWMODE:
- iwctl_giwmode(dev, NULL, &(wrq->u.mode), NULL);
- break;
-
- // Set WEP keys and mode
- case SIOCSIWENCODE:
- {
- char abyKey[WLAN_WEP232_KEYLEN];
-
- if (wrq->u.encoding.pointer) {
-
-
- if (wrq->u.encoding.length > WLAN_WEP232_KEYLEN) {
- rc = -E2BIG;
- break;
- }
- memset(abyKey, 0, WLAN_WEP232_KEYLEN);
- if (copy_from_user(abyKey,
- wrq->u.encoding.pointer,
- wrq->u.encoding.length)) {
- rc = -EFAULT;
- break;
- }
- } else if (wrq->u.encoding.length != 0) {
- rc = -EINVAL;
- break;
- }
- rc = iwctl_siwencode(dev, NULL, &(wrq->u.encoding), abyKey);
- }
- break;
-
- // Get the WEP keys and mode
- case SIOCGIWENCODE:
-
- if (!capable(CAP_NET_ADMIN)) {
- rc = -EPERM;
- break;
- }
- {
- char abyKey[WLAN_WEP232_KEYLEN];
-
- rc = iwctl_giwencode(dev, NULL, &(wrq->u.encoding), abyKey);
- if (rc != 0) break;
- if (wrq->u.encoding.pointer) {
- if (copy_to_user(wrq->u.encoding.pointer,
- abyKey,
- wrq->u.encoding.length))
- rc = -EFAULT;
- }
- }
- break;
-
- // Get the current Tx-Power
- case SIOCGIWTXPOW:
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCGIWTXPOW \n");
- rc = -EOPNOTSUPP;
- break;
-
- case SIOCSIWTXPOW:
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCGIWTXPOW \n");
- rc = -EOPNOTSUPP;
- break;
-
- case SIOCSIWRETRY:
-
- rc = iwctl_siwretry(dev, NULL, &(wrq->u.retry), NULL);
- break;
-
- case SIOCGIWRETRY:
-
- rc = iwctl_giwretry(dev, NULL, &(wrq->u.retry), NULL);
- break;
-
- // Get range of parameters
- case SIOCGIWRANGE:
-
- {
- struct iw_range range;
-
- iwctl_giwrange(dev, NULL, &(wrq->u.data), (char *) &range);
- if (copy_to_user(wrq->u.data.pointer, &range, sizeof(struct iw_range)))
- rc = -EFAULT;
- }
-
- break;
-
- case SIOCGIWPOWER:
-
- rc = iwctl_giwpower(dev, NULL, &(wrq->u.power), NULL);
- break;
-
-
- case SIOCSIWPOWER:
-
- rc = iwctl_siwpower(dev, NULL, &(wrq->u.power), NULL);
- break;
-
-
- case SIOCGIWSENS:
-
- rc = iwctl_giwsens(dev, NULL, &(wrq->u.sens), NULL);
- break;
-
- case SIOCSIWSENS:
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCSIWSENS \n");
- rc = -EOPNOTSUPP;
- break;
-
- case SIOCGIWAPLIST:
- {
- char buffer[IW_MAX_AP * (sizeof(struct sockaddr) + sizeof(struct iw_quality))];
-
- if (wrq->u.data.pointer) {
- rc = iwctl_giwaplist(dev, NULL, &(wrq->u.data), buffer);
- if (rc == 0) {
- if (copy_to_user(wrq->u.data.pointer,
- buffer,
- (wrq->u.data.length * (sizeof(struct sockaddr) + sizeof(struct iw_quality)))
- ))
- rc = -EFAULT;
- }
- }
- }
- break;
-
-
-#ifdef WIRELESS_SPY
- // Set the spy list
- case SIOCSIWSPY:
-
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCSIWSPY \n");
- rc = -EOPNOTSUPP;
- break;
-
- // Get the spy list
- case SIOCGIWSPY:
-
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCSIWSPY \n");
- rc = -EOPNOTSUPP;
- break;
-
-#endif // WIRELESS_SPY
-
- case SIOCGIWPRIV:
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCGIWPRIV \n");
- rc = -EOPNOTSUPP;
-/*
- if(wrq->u.data.pointer) {
- wrq->u.data.length = sizeof(iwctl_private_args) / sizeof( iwctl_private_args[0]);
-
- if(copy_to_user(wrq->u.data.pointer,
- (u_char *) iwctl_private_args,
- sizeof(iwctl_private_args)))
- rc = -EFAULT;
- }
-*/
- break;
-
-#ifdef WPA_SUPPLICANT_DRIVER_WEXT_SUPPORT
- case SIOCSIWAUTH:
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCSIWAUTH\n");
- rc = iwctl_siwauth(dev, NULL, &(wrq->u.param), NULL);
- break;
-
- case SIOCGIWAUTH:
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCGIWAUTH \n");
- rc = iwctl_giwauth(dev, NULL, &(wrq->u.param), NULL);
- break;
-
- case SIOCSIWGENIE:
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCSIWGENIE \n");
- rc = iwctl_siwgenie(dev, NULL, &(wrq->u.data), wrq->u.data.pointer);
- break;
-
- case SIOCGIWGENIE:
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCGIWGENIE \n");
- rc = iwctl_giwgenie(dev, NULL, &(wrq->u.data), wrq->u.data.pointer);
- break;
-
- case SIOCSIWENCODEEXT:
- {
- char extra[sizeof(struct iw_encode_ext)+MAX_KEY_LEN+1];
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCSIWENCODEEXT \n");
- if(wrq->u.encoding.pointer){
- memset(extra, 0, sizeof(struct iw_encode_ext)+MAX_KEY_LEN+1);
- if(wrq->u.encoding.length > (sizeof(struct iw_encode_ext)+ MAX_KEY_LEN)){
- rc = -E2BIG;
- break;
- }
- if(copy_from_user(extra, wrq->u.encoding.pointer,wrq->u.encoding.length)){
- rc = -EFAULT;
- break;
- }
- }else if(wrq->u.encoding.length != 0){
- rc = -EINVAL;
- break;
- }
- rc = iwctl_siwencodeext(dev, NULL, &(wrq->u.encoding), extra);
- }
- break;
-
- case SIOCGIWENCODEEXT:
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCGIWENCODEEXT \n");
- rc = iwctl_giwencodeext(dev, NULL, &(wrq->u.encoding), NULL);
- break;
-
- case SIOCSIWMLME:
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCSIWMLME \n");
- rc = iwctl_siwmlme(dev, NULL, &(wrq->u.data), wrq->u.data.pointer);
- break;
-
-#endif // #ifdef WPA_SUPPLICANT_DRIVER_WEXT_SUPPORT
-
- case IOCTL_CMD_TEST:
-
- if (!(pDevice->flags & DEVICE_FLAGS_OPENED)) {
- rc = -EFAULT;
- break;
- } else {
- rc = 0;
- }
- pReq = (PSCmdRequest)rq;
-
- //20080130-01,<Remark> by Mike Liu
- // if(pDevice->bLinkPass==TRUE)
- pReq->wResult = MAGIC_CODE; //Linking status:0x3142
- //20080130-02,<Remark> by Mike Liu
- // else
- // pReq->wResult = MAGIC_CODE+1; //disconnect status:0x3143
- break;
-
- case IOCTL_CMD_SET:
- if (!(pDevice->flags & DEVICE_FLAGS_OPENED) &&
- (((PSCmdRequest)rq)->wCmdCode !=WLAN_CMD_SET_WPA))
- {
- rc = -EFAULT;
- break;
- } else {
- rc = 0;
- }
-
- if (test_and_set_bit( 0, (void*)&(pMgmt->uCmdBusy))) {
- return -EBUSY;
- }
- rc = private_ioctl(pDevice, rq);
- clear_bit( 0, (void*)&(pMgmt->uCmdBusy));
- break;
-
- case IOCTL_CMD_HOSTAPD:
-
- if (!(pDevice->flags & DEVICE_FLAGS_OPENED)) {
- rc = -EFAULT;
- break;
- } else {
- rc = 0;
- }
+ if (!(pDevice->flags & DEVICE_FLAGS_OPENED))
+ rc = -EFAULT;
rc = vt6656_hostap_ioctl(pDevice, &wrq->u.data);
- break;
-
- case IOCTL_CMD_WPA:
-
- if (!(pDevice->flags & DEVICE_FLAGS_OPENED)) {
- rc = -EFAULT;
- break;
- } else {
- rc = 0;
- }
-
- rc = wpa_ioctl(pDevice, &wrq->u.data);
- break;
+ break;
case SIOCETHTOOL:
- return ethtool_ioctl(dev, (void *) rq->ifr_data);
- // All other calls are currently unsupported
+ return ethtool_ioctl(dev, (void *) rq->ifr_data);
- default:
- rc = -EOPNOTSUPP;
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Ioctl command not supported..%x\n", cmd);
+ }
-
- }
-
- if (pDevice->bCommit) {
- if (pMgmt->eConfigMode == WMAC_CONFIG_AP) {
- netif_stop_queue(pDevice->dev);
- spin_lock_irq(&pDevice->lock);
- bScheduleCommand((void *) pDevice, WLAN_CMD_RUN_AP, NULL);
- spin_unlock_irq(&pDevice->lock);
- }
- else {
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Commit the settings\n");
- spin_lock_irq(&pDevice->lock);
-//2007-1121-01<Modify>by EinsnLiu
- if (pDevice->bLinkPass &&
- memcmp(pMgmt->abyCurrSSID,pMgmt->abyDesireSSID,WLAN_IEHDR_LEN + WLAN_SSID_MAXLEN)) {
- bScheduleCommand((void *) pDevice, WLAN_CMD_DISASSOCIATE, NULL);
- } else {
- pDevice->bLinkPass = FALSE;
- pMgmt->eCurrState = WMAC_STATE_IDLE;
- memset(pMgmt->abyCurrBSSID, 0, 6);
- }
- ControlvMaskByte(pDevice,MESSAGE_REQUEST_MACREG,MAC_REG_PAPEDELAY,LEDSTS_STS,LEDSTS_SLOW);
-//End Modify
- netif_stop_queue(pDevice->dev);
-#ifdef WPA_SUPPLICANT_DRIVER_WEXT_SUPPORT
- pMgmt->eScanType = WMAC_SCAN_ACTIVE;
- if (!pDevice->bWPASuppWextEnabled)
-#endif
- bScheduleCommand((void *) pDevice,
- WLAN_CMD_BSSID_SCAN,
- pMgmt->abyDesireSSID);
- bScheduleCommand((void *) pDevice,
- WLAN_CMD_SSID,
- NULL);
- spin_unlock_irq(&pDevice->lock);
- }
- pDevice->bCommit = FALSE;
- }
-
-
- return rc;
+ return rc;
}
diff --git a/drivers/staging/vt6656/mib.c b/drivers/staging/vt6656/mib.c
index 8a6ee72..d4c7b0c 100644
--- a/drivers/staging/vt6656/mib.c
+++ b/drivers/staging/vt6656/mib.c
@@ -37,7 +37,6 @@
*
*/
-#include "upc.h"
#include "mac.h"
#include "tether.h"
#include "mib.h"
diff --git a/drivers/staging/vt6656/mib.h b/drivers/staging/vt6656/mib.h
index 82d69a9..85c28e9 100644
--- a/drivers/staging/vt6656/mib.h
+++ b/drivers/staging/vt6656/mib.h
@@ -68,7 +68,6 @@
unsigned long long TKIPLocalMICFailures;
unsigned long long TKIPRemoteMICFailures;
unsigned long long TKIPICVErrors;
- unsigned long long TKIPCounterMeasuresInvoked;
unsigned long long TKIPReplays;
unsigned long long CCMPFormatErrors;
unsigned long long CCMPReplays;
diff --git a/drivers/staging/vt6656/rf.c b/drivers/staging/vt6656/rf.c
index 593cdc7..74c0598 100644
--- a/drivers/staging/vt6656/rf.c
+++ b/drivers/staging/vt6656/rf.c
@@ -769,6 +769,9 @@
return TRUE;
}
+ if (uCH == 0)
+ return -EINVAL;
+
switch (uRATE) {
case RATE_1M:
case RATE_2M:
diff --git a/drivers/staging/vt6656/rxtx.c b/drivers/staging/vt6656/rxtx.c
index 3390838..83c04e1 100644
--- a/drivers/staging/vt6656/rxtx.c
+++ b/drivers/staging/vt6656/rxtx.c
@@ -355,7 +355,7 @@
}
// Append IV after Mac Header
*pdwIV &= WEP_IV_MASK;//00000000 11111111 11111111 11111111
- *pdwIV |= (pDevice->byKeyIndex << 30);
+ *pdwIV |= (u32)pDevice->byKeyIndex << 30;
*pdwIV = cpu_to_le32(*pdwIV);
pDevice->dwIVCounter++;
if (pDevice->dwIVCounter > WEP_IV_MASK) {
@@ -375,7 +375,8 @@
*(pbyIVHead+3) = (BYTE)(((pDevice->byKeyIndex << 6) & 0xc0) | 0x20); // 0x20 is ExtIV
// Append IV&ExtIV after Mac Header
*pdwExtIV = cpu_to_le32(pTransmitKey->dwTSC47_16);
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"vFillTxKey()---- pdwExtIV: %lx\n", *pdwExtIV);
+ DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"vFillTxKey()---- pdwExtIV: %x\n",
+ *pdwExtIV);
} else if (pTransmitKey->byCipherSuite == KEY_CTL_CCMP) {
pTransmitKey->wTSC15_0++;
@@ -1452,12 +1453,10 @@
pvRrvTime = pMICHDR = pvRTS = pvCTS = pvTxDataHd = NULL;
- if ((bNeedEncryption) && (pTransmitKey != NULL)) {
- if (((PSKeyTable) (pTransmitKey->pvKeyTable))->bSoftWEP == TRUE) {
- // WEP 256
- bSoftWEP = TRUE;
- }
- }
+ if (bNeedEncryption && pTransmitKey->pvKeyTable) {
+ if (((PSKeyTable)&pTransmitKey->pvKeyTable)->bSoftWEP == TRUE)
+ bSoftWEP = TRUE; /* WEP 256 */
+ }
pTxBufHead = (PTX_BUFFER) usbPacketBuf;
memset(pTxBufHead, 0, sizeof(TX_BUFFER));
@@ -1751,7 +1750,8 @@
MIC_vAppend((PBYTE)&(psEthHeader->abyDstAddr[0]), 12);
dwMIC_Priority = 0;
MIC_vAppend((PBYTE)&dwMIC_Priority, 4);
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"MIC KEY: %lX, %lX\n", dwMICKey0, dwMICKey1);
+ DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"MIC KEY: %X, %X\n",
+ dwMICKey0, dwMICKey1);
///////////////////////////////////////////////////////////////////
@@ -2633,7 +2633,8 @@
MIC_vAppend((PBYTE)&(sEthHeader.abyDstAddr[0]), 12);
dwMIC_Priority = 0;
MIC_vAppend((PBYTE)&dwMIC_Priority, 4);
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"DMA0_tx_8021:MIC KEY: %lX, %lX\n", dwMICKey0, dwMICKey1);
+ DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"DMA0_tx_8021:MIC KEY:"\
+ " %X, %X\n", dwMICKey0, dwMICKey1);
uLength = cbHeaderSize + cbMacHdLen + uPadding + cbIVlen;
@@ -2653,7 +2654,8 @@
DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"uLength: %d, %d\n", uLength, cbFrameBodySize);
DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"cbReqCount:%d, %d, %d, %d\n", cbReqCount, cbHeaderSize, uPadding, cbIVlen);
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"MIC:%lx, %lx\n", *pdwMIC_L, *pdwMIC_R);
+ DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"MIC:%x, %x\n",
+ *pdwMIC_L, *pdwMIC_R);
}
@@ -3027,21 +3029,18 @@
DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"error: KEY is GTK!!~~\n");
}
else {
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Find PTK [%lX]\n", pTransmitKey->dwKeyIndex);
+ DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Find PTK [%X]\n",
+ pTransmitKey->dwKeyIndex);
bNeedEncryption = TRUE;
}
}
}
- if (pDevice->byCntMeasure == 2) {
- bNeedDeAuth = TRUE;
- pDevice->s802_11Counter.TKIPCounterMeasuresInvoked++;
- }
-
if (pDevice->bEnableHostWEP) {
if ((uNodeIndex != 0) &&
(pMgmt->sNodeDBTable[uNodeIndex].dwKeyIndex & PAIRWISE_KEY)) {
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Find PTK [%lX]\n", pTransmitKey->dwKeyIndex);
+ DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Find PTK [%X]\n",
+ pTransmitKey->dwKeyIndex);
bNeedEncryption = TRUE;
}
}
@@ -3050,6 +3049,7 @@
if (pTransmitKey == NULL) {
DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"return no tx key\n");
+ pContext->bBoolInUse = FALSE;
dev_kfree_skb_irq(skb);
pStats->tx_dropped++;
return STATUS_FAILURE;
diff --git a/drivers/staging/vt6656/rxtx.h b/drivers/staging/vt6656/rxtx.h
index f99acf1..dd2198a 100644
--- a/drivers/staging/vt6656/rxtx.h
+++ b/drivers/staging/vt6656/rxtx.h
@@ -61,9 +61,9 @@
// MICHDR data header
//
typedef struct tagSMICHDR {
- DWORD adwHDR0[4];
- DWORD adwHDR1[4];
- DWORD adwHDR2[4];
+ u32 adwHDR0[4];
+ u32 adwHDR1[4];
+ u32 adwHDR2[4];
} SMICHDR, *PSMICHDR;
@@ -630,7 +630,7 @@
BYTE byPKTNO;
WORD wTxByteCount;
- DWORD adwTxKey[4];
+ u32 adwTxKey[4];
WORD wFIFOCtl;
WORD wTimeStamp;
WORD wFragCtl;
diff --git a/drivers/staging/vt6656/tkip.c b/drivers/staging/vt6656/tkip.c
index 003123e..282c08d 100644
--- a/drivers/staging/vt6656/tkip.c
+++ b/drivers/staging/vt6656/tkip.c
@@ -189,27 +189,25 @@
PBYTE pbyRC4Key
)
{
- unsigned int p1k[5];
-// unsigned int ttak0, ttak1, ttak2, ttak3, ttak4;
- unsigned int tsc0, tsc1, tsc2;
- unsigned int ppk0, ppk1, ppk2, ppk3, ppk4, ppk5;
- unsigned long int pnl,pnh;
+ u32 p1k[5];
+ u32 tsc0, tsc1, tsc2;
+ u32 ppk0, ppk1, ppk2, ppk3, ppk4, ppk5;
+ u32 pnl, pnh;
+ int i, j;
- int i, j;
+ pnl = (u32)wTSC15_0;
+ pnh = (u32)(dwTSC47_16 & 0xffffffff);
- pnl = wTSC15_0;
- pnh = dwTSC47_16;
+ tsc0 = (u32)((pnh >> 16) % 65536); /* msb */
+ tsc1 = (u32)(pnh % 65536);
+ tsc2 = (u32)(pnl % 65536); /* lsb */
- tsc0 = (unsigned int)((pnh >> 16) % 65536); /* msb */
- tsc1 = (unsigned int)(pnh % 65536);
- tsc2 = (unsigned int)(pnl % 65536); /* lsb */
-
- /* Phase 1, step 1 */
- p1k[0] = tsc1;
- p1k[1] = tsc0;
- p1k[2] = (unsigned int)(pbyTA[0] + (pbyTA[1]*256));
- p1k[3] = (unsigned int)(pbyTA[2] + (pbyTA[3]*256));
- p1k[4] = (unsigned int)(pbyTA[4] + (pbyTA[5]*256));
+ /* Phase 1, step 1 */
+ p1k[0] = tsc1;
+ p1k[1] = tsc0;
+ p1k[2] = (u32)(pbyTA[0] + (pbyTA[1]*256));
+ p1k[3] = (u32)(pbyTA[2] + (pbyTA[3]*256));
+ p1k[4] = (u32)(pbyTA[4] + (pbyTA[5]*256));
/* Phase 1, step 2 */
for (i=0; i<8; i++) {
diff --git a/drivers/staging/vt6656/ttype.h b/drivers/staging/vt6656/ttype.h
index 8e9450e..dfbf747 100644
--- a/drivers/staging/vt6656/ttype.h
+++ b/drivers/staging/vt6656/ttype.h
@@ -29,6 +29,8 @@
#ifndef __TTYPE_H__
#define __TTYPE_H__
+#include <linux/types.h>
+
/******* Common definitions and typedefs ***********************************/
typedef int BOOL;
@@ -42,17 +44,17 @@
/****** Simple typedefs ***************************************************/
-typedef unsigned char BYTE; // 8-bit
-typedef unsigned short WORD; // 16-bit
-typedef unsigned long DWORD; // 32-bit
+typedef u8 BYTE;
+typedef u16 WORD;
+typedef u32 DWORD;
// QWORD is for those situation that we want
// an 8-byte-aligned 8 byte long structure
// which is NOT really a floating point number.
typedef union tagUQuadWord {
struct {
- DWORD dwLowDword;
- DWORD dwHighDword;
+ u32 dwLowDword;
+ u32 dwHighDword;
} u;
double DoNotUseThisField;
} UQuadWord;
@@ -60,8 +62,8 @@
/****** Common pointer types ***********************************************/
-typedef unsigned long ULONG_PTR; // 32-bit
-typedef unsigned long DWORD_PTR; // 32-bit
+typedef u32 ULONG_PTR;
+typedef u32 DWORD_PTR;
// boolean pointer
diff --git a/drivers/staging/vt6656/upc.h b/drivers/staging/vt6656/upc.h
deleted file mode 100644
index b33aba4..0000000
--- a/drivers/staging/vt6656/upc.h
+++ /dev/null
@@ -1,162 +0,0 @@
-/*
- * Copyright (c) 1996, 2003 VIA Networking Technologies, Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- *
- * File: upc.h
- *
- * Purpose: Macros to access device
- *
- * Author: Tevin Chen
- *
- * Date: Mar 17, 1997
- *
- */
-
-#ifndef __UPC_H__
-#define __UPC_H__
-
-#include "device.h"
-#include "ttype.h"
-
-/*--------------------- Export Definitions -------------------------*/
-
-
-//
-// For IO mapped
-//
-
-#ifdef IO_MAP
-
-#define VNSvInPortB(dwIOAddress, pbyData) { \
- *(pbyData) = inb(dwIOAddress); \
-}
-
-
-#define VNSvInPortW(dwIOAddress, pwData) { \
- *(pwData) = inw(dwIOAddress); \
-}
-
-#define VNSvInPortD(dwIOAddress, pdwData) { \
- *(pdwData) = inl(dwIOAddress); \
-}
-
-
-#define VNSvOutPortB(dwIOAddress, byData) { \
- outb(byData, dwIOAddress); \
-}
-
-
-#define VNSvOutPortW(dwIOAddress, wData) { \
- outw(wData, dwIOAddress); \
-}
-
-#define VNSvOutPortD(dwIOAddress, dwData) { \
- outl(dwData, dwIOAddress); \
-}
-
-#else
-
-//
-// For memory mapped IO
-//
-
-
-#define VNSvInPortB(dwIOAddress, pbyData) { \
- volatile BYTE* pbyAddr = ((PBYTE)(dwIOAddress)); \
- *(pbyData) = readb(pbyAddr); \
-}
-
-
-#define VNSvInPortW(dwIOAddress, pwData) { \
- volatile WORD* pwAddr = ((PWORD)(dwIOAddress)); \
- *(pwData) = readw(pwAddr); \
-}
-
-#define VNSvInPortD(dwIOAddress, pdwData) { \
- volatile DWORD* pdwAddr = ((PDWORD)(dwIOAddress)); \
- *(pdwData) = readl(pdwAddr); \
-}
-
-
-#define VNSvOutPortB(dwIOAddress, byData) { \
- volatile BYTE* pbyAddr = ((PBYTE)(dwIOAddress)); \
- writeb((BYTE)byData, pbyAddr); \
-}
-
-
-#define VNSvOutPortW(dwIOAddress, wData) { \
- volatile WORD* pwAddr = ((PWORD)(dwIOAddress)); \
- writew((WORD)wData, pwAddr); \
-}
-
-#define VNSvOutPortD(dwIOAddress, dwData) { \
- volatile DWORD* pdwAddr = ((PDWORD)(dwIOAddress)); \
- writel((DWORD)dwData, pdwAddr); \
-}
-
-#endif
-
-
-//
-// ALWAYS IO-Mapped IO when in 16-bit/32-bit environment
-//
-#define PCBvInPortB(dwIOAddress, pbyData) { \
- *(pbyData) = inb(dwIOAddress); \
-}
-
-#define PCBvInPortW(dwIOAddress, pwData) { \
- *(pwData) = inw(dwIOAddress); \
-}
-
-#define PCBvInPortD(dwIOAddress, pdwData) { \
- *(pdwData) = inl(dwIOAddress); \
-}
-
-#define PCBvOutPortB(dwIOAddress, byData) { \
- outb(byData, dwIOAddress); \
-}
-
-#define PCBvOutPortW(dwIOAddress, wData) { \
- outw(wData, dwIOAddress); \
-}
-
-#define PCBvOutPortD(dwIOAddress, dwData) { \
- outl(dwData, dwIOAddress); \
-}
-
-
-#define PCAvDelayByIO(uDelayUnit) { \
- BYTE byData; \
- unsigned long ii; \
- \
- if (uDelayUnit <= 50) { \
- udelay(uDelayUnit); \
- } \
- else { \
- for (ii = 0; ii < (uDelayUnit); ii++) \
- byData = inb(0x61); \
- } \
-}
-
-
-/*--------------------- Export Classes ----------------------------*/
-
-/*--------------------- Export Variables --------------------------*/
-
-/*--------------------- Export Functions --------------------------*/
-
-#endif /* __UPC_H__ */
diff --git a/drivers/staging/vt6656/usbpipe.c b/drivers/staging/vt6656/usbpipe.c
index 609e8fa..fc68518 100644
--- a/drivers/staging/vt6656/usbpipe.c
+++ b/drivers/staging/vt6656/usbpipe.c
@@ -575,7 +575,8 @@
// MP_SET_FLAG(pDevice, fMP_DISCONNECTED);
// }
} else {
- bIndicateReceive = TRUE;
+ if (bytesRead)
+ bIndicateReceive = TRUE;
pDevice->ulBulkInContCRCError = 0;
pDevice->ulBulkInBytesRead += bytesRead;
@@ -660,6 +661,7 @@
if (status != 0)
{
DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Submit Tx URB failed %d\n", status);
+ pContext->bBoolInUse = FALSE;
return STATUS_FAILURE;
}
return STATUS_PENDING;
diff --git a/drivers/staging/vt6656/wcmd.c b/drivers/staging/vt6656/wcmd.c
index 586fbe1..22f6b41 100644
--- a/drivers/staging/vt6656/wcmd.c
+++ b/drivers/staging/vt6656/wcmd.c
@@ -316,17 +316,19 @@
return pTxPacket;
}
-void vCommandTimerWait(void *hDeviceContext, unsigned int MSecond)
+void vCommandTimerWait(void *hDeviceContext, unsigned long MSecond)
{
- PSDevice pDevice = (PSDevice)hDeviceContext;
+ PSDevice pDevice = (PSDevice)hDeviceContext;
- init_timer(&pDevice->sTimerCommand);
- pDevice->sTimerCommand.data = (unsigned long)pDevice;
- pDevice->sTimerCommand.function = (TimerFunction)vRunCommand;
- // RUN_AT :1 msec ~= (HZ/1024)
- pDevice->sTimerCommand.expires = (unsigned int)RUN_AT((MSecond * HZ) >> 10);
- add_timer(&pDevice->sTimerCommand);
- return;
+ init_timer(&pDevice->sTimerCommand);
+
+ pDevice->sTimerCommand.data = (unsigned long)pDevice;
+ pDevice->sTimerCommand.function = (TimerFunction)vRunCommand;
+ pDevice->sTimerCommand.expires = RUN_AT((MSecond * HZ) / 1000);
+
+ add_timer(&pDevice->sTimerCommand);
+
+ return;
}
void vRunCommand(void *hDeviceContext)
@@ -340,6 +342,7 @@
BYTE byMask[8] = {1, 2, 4, 8, 0x10, 0x20, 0x40, 0x80};
struct sk_buff *skb;
BYTE byData;
+ union iwreq_data wrqu;
if (pDevice->dwDiagRefCount != 0)
@@ -501,16 +504,11 @@
pMgmt->eScanState = WMAC_NO_SCANNING;
pDevice->bStopDataPkt = FALSE;
-#ifdef WPA_SUPPLICANT_DRIVER_WEXT_SUPPORT
- if(pMgmt->eScanType == WMAC_SCAN_PASSIVE)
- {
- //send scan event to wpa_Supplicant
- union iwreq_data wrqu;
- PRINT_K("wireless_send_event--->SIOCGIWSCAN(scan done)\n");
- memset(&wrqu, 0, sizeof(wrqu));
- wireless_send_event(pDevice->dev, SIOCGIWSCAN, &wrqu, NULL);
- }
-#endif
+ /*send scan event to wpa_Supplicant*/
+ PRINT_K("wireless_send_event--->SIOCGIWSCAN(scan done)\n");
+ memset(&wrqu, 0, sizeof(wrqu));
+ wireless_send_event(pDevice->dev, SIOCGIWSCAN, &wrqu, NULL);
+
s_bCommandComplete(pDevice);
break;
@@ -523,13 +521,11 @@
return;
} else {
- #ifdef WPA_SUPPLICANT_DRIVER_WEXT_SUPPORT
pDevice->bwextstep0 = FALSE;
pDevice->bwextstep1 = FALSE;
pDevice->bwextstep2 = FALSE;
pDevice->bwextstep3 = FALSE;
pDevice->bWPASuppWextEnabled = FALSE;
- #endif
pDevice->fWPA_Authened = FALSE;
DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Send Disassociation Packet..\n");
@@ -672,7 +668,6 @@
}
else {
DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Disconnect SSID none\n");
- #ifdef WPA_SUPPLICANT_DRIVER_WEXT_SUPPORT
// if(pDevice->bWPASuppWextEnabled == TRUE)
{
union iwreq_data wrqu;
@@ -681,7 +676,6 @@
PRINT_K("wireless_send_event--->SIOCGIWAP(disassociated:vMgrJoinBSSBegin Fail !!)\n");
wireless_send_event(pDevice->dev, SIOCGIWAP, &wrqu, NULL);
}
- #endif
}
}
s_bCommandComplete(pDevice);
@@ -924,7 +918,6 @@
// unlock command busy
pMgmt->eCurrState = WMAC_STATE_IDLE;
pMgmt->sNodeDBTable[0].bActive = FALSE;
- #ifdef WPA_SUPPLICANT_DRIVER_WEXT_SUPPORT
// if(pDevice->bWPASuppWextEnabled == TRUE)
{
union iwreq_data wrqu;
@@ -933,15 +926,12 @@
PRINT_K("wireless_send_event--->SIOCGIWAP(disassociated)\n");
wireless_send_event(pDevice->dev, SIOCGIWAP, &wrqu, NULL);
}
- #endif
}
- #ifdef WPA_SUPPLICANT_DRIVER_WEXT_SUPPORT
pDevice->bwextstep0 = FALSE;
pDevice->bwextstep1 = FALSE;
pDevice->bwextstep2 = FALSE;
pDevice->bwextstep3 = FALSE;
pDevice->bWPASuppWextEnabled = FALSE;
- #endif
//clear current SSID
pItemSSID = (PWLAN_IE_SSID)pMgmt->abyCurrSSID;
pItemSSID->len = 0;
diff --git a/drivers/staging/vt6656/wmgr.c b/drivers/staging/vt6656/wmgr.c
index 7db6a8d..95ddc83 100644
--- a/drivers/staging/vt6656/wmgr.c
+++ b/drivers/staging/vt6656/wmgr.c
@@ -925,7 +925,6 @@
WLAN_FR_ASSOCRESP sFrame;
PWLAN_IE_SSID pItemSSID;
PBYTE pbyIEs;
- viawget_wpa_header *wpahdr;
@@ -973,32 +972,7 @@
DBG_PRT(MSG_LEVEL_INFO, KERN_INFO "Link with AP(SSID): %s\n", pItemSSID->abySSID);
pDevice->bLinkPass = TRUE;
ControlvMaskByte(pDevice,MESSAGE_REQUEST_MACREG,MAC_REG_PAPEDELAY,LEDSTS_STS,LEDSTS_INTER);
- if ((pDevice->bWPADEVUp) && (pDevice->skb != NULL)) {
- if(skb_tailroom(pDevice->skb) <(sizeof(viawget_wpa_header)+pMgmt->sAssocInfo.AssocInfo.ResponseIELength+
- pMgmt->sAssocInfo.AssocInfo.RequestIELength)) { //data room not enough
- dev_kfree_skb(pDevice->skb);
- pDevice->skb = dev_alloc_skb((int)pDevice->rx_buf_sz);
- }
- wpahdr = (viawget_wpa_header *)pDevice->skb->data;
- wpahdr->type = VIAWGET_ASSOC_MSG;
- wpahdr->resp_ie_len = pMgmt->sAssocInfo.AssocInfo.ResponseIELength;
- wpahdr->req_ie_len = pMgmt->sAssocInfo.AssocInfo.RequestIELength;
- memcpy(pDevice->skb->data + sizeof(viawget_wpa_header), pMgmt->sAssocInfo.abyIEs, wpahdr->req_ie_len);
- memcpy(pDevice->skb->data + sizeof(viawget_wpa_header) + wpahdr->req_ie_len,
- pbyIEs,
- wpahdr->resp_ie_len
- );
- skb_put(pDevice->skb, sizeof(viawget_wpa_header) + wpahdr->resp_ie_len + wpahdr->req_ie_len);
- pDevice->skb->dev = pDevice->wpadev;
- skb_reset_mac_header(pDevice->skb);
- pDevice->skb->pkt_type = PACKET_HOST;
- pDevice->skb->protocol = htons(ETH_P_802_2);
- memset(pDevice->skb->cb, 0, sizeof(pDevice->skb->cb));
- netif_rx(pDevice->skb);
- pDevice->skb = dev_alloc_skb((int)pDevice->rx_buf_sz);
- }
-#ifdef WPA_SUPPLICANT_DRIVER_WEXT_SUPPORT
//if(pDevice->bWPASuppWextEnabled == TRUE)
{
BYTE buf[512];
@@ -1037,7 +1011,6 @@
wireless_send_event(pDevice->dev, SIOCGIWAP, &wrqu, NULL);
}
-#endif //#ifdef WPA_SUPPLICANT_DRIVER_WEXT_SUPPORT
}
else {
@@ -1053,14 +1026,12 @@
}
-#ifdef WPA_SUPPLICANT_DRIVER_WEXT_SUPPORT
//need clear flags related to Networkmanager
pDevice->bwextstep0 = FALSE;
pDevice->bwextstep1 = FALSE;
pDevice->bwextstep2 = FALSE;
pDevice->bwextstep3 = FALSE;
pDevice->bWPASuppWextEnabled = FALSE;
-#endif
if(pMgmt->eCurrState == WMAC_STATE_ASSOC)
timer_expire(pDevice->sTimerCommand, 0);
@@ -1587,7 +1558,6 @@
WLAN_FR_DISASSOC sFrame;
unsigned int uNodeIndex = 0;
CMD_STATUS CmdStatus;
- viawget_wpa_header *wpahdr;
if ( pMgmt->eCurrMode == WMAC_MODE_ESS_AP ){
// if is acting an AP..
@@ -1608,20 +1578,6 @@
DBG_PRT(MSG_LEVEL_NOTICE, KERN_INFO "AP disassociated me, reason=%d.\n", cpu_to_le16(*(sFrame.pwReason)));
pDevice->fWPA_Authened = FALSE;
- if ((pDevice->bWPADEVUp) && (pDevice->skb != NULL)) {
- wpahdr = (viawget_wpa_header *)pDevice->skb->data;
- wpahdr->type = VIAWGET_DISASSOC_MSG;
- wpahdr->resp_ie_len = 0;
- wpahdr->req_ie_len = 0;
- skb_put(pDevice->skb, sizeof(viawget_wpa_header));
- pDevice->skb->dev = pDevice->wpadev;
- skb_reset_mac_header(pDevice->skb);
- pDevice->skb->pkt_type = PACKET_HOST;
- pDevice->skb->protocol = htons(ETH_P_802_2);
- memset(pDevice->skb->cb, 0, sizeof(pDevice->skb->cb));
- netif_rx(pDevice->skb);
- pDevice->skb = dev_alloc_skb((int)pDevice->rx_buf_sz);
- }
//TODO: do something let upper layer know or
//try to send associate packet again because of inactivity timeout
@@ -1638,7 +1594,6 @@
}
}
- #ifdef WPA_SUPPLICANT_DRIVER_WEXT_SUPPORT
// if(pDevice->bWPASuppWextEnabled == TRUE)
{
union iwreq_data wrqu;
@@ -1647,7 +1602,6 @@
PRINT_K("wireless_send_event--->SIOCGIWAP(disassociated)\n");
wireless_send_event(pDevice->dev, SIOCGIWAP, &wrqu, NULL);
}
- #endif
}
/* else, ignore it */
@@ -1676,7 +1630,6 @@
{
WLAN_FR_DEAUTHEN sFrame;
unsigned int uNodeIndex = 0;
- viawget_wpa_header *wpahdr;
if (pMgmt->eCurrMode == WMAC_MODE_ESS_AP ){
@@ -1712,22 +1665,6 @@
}
}
- if ((pDevice->bWPADEVUp) && (pDevice->skb != NULL)) {
- wpahdr = (viawget_wpa_header *)pDevice->skb->data;
- wpahdr->type = VIAWGET_DISASSOC_MSG;
- wpahdr->resp_ie_len = 0;
- wpahdr->req_ie_len = 0;
- skb_put(pDevice->skb, sizeof(viawget_wpa_header));
- pDevice->skb->dev = pDevice->wpadev;
- skb_reset_mac_header(pDevice->skb);
- pDevice->skb->pkt_type = PACKET_HOST;
- pDevice->skb->protocol = htons(ETH_P_802_2);
- memset(pDevice->skb->cb, 0, sizeof(pDevice->skb->cb));
- netif_rx(pDevice->skb);
- pDevice->skb = dev_alloc_skb((int)pDevice->rx_buf_sz);
- }
-
- #ifdef WPA_SUPPLICANT_DRIVER_WEXT_SUPPORT
// if(pDevice->bWPASuppWextEnabled == TRUE)
{
union iwreq_data wrqu;
@@ -1736,7 +1673,6 @@
PRINT_K("wireless_send_event--->SIOCGIWAP(disauthen)\n");
wireless_send_event(pDevice->dev, SIOCGIWAP, &wrqu, NULL);
}
- #endif
}
/* else, ignore it. TODO: IBSS authentication service
@@ -2645,10 +2581,8 @@
*/
}
-#ifdef WPA_SUPPLICANT_DRIVER_WEXT_SUPPORT
//if(pDevice->bWPASuppWextEnabled == TRUE)
Encyption_Rebuild(pDevice, pCurr);
-#endif
// Infrastructure BSS
s_vMgrSynchBSS(pDevice,
diff --git a/drivers/staging/vt6656/wmgr.h b/drivers/staging/vt6656/wmgr.h
index 13dfb3b..52b1b56 100644
--- a/drivers/staging/vt6656/wmgr.h
+++ b/drivers/staging/vt6656/wmgr.h
@@ -89,44 +89,44 @@
//+++ NDIS related
-typedef unsigned char NDIS_802_11_MAC_ADDRESS[ETH_ALEN];
+typedef u8 NDIS_802_11_MAC_ADDRESS[ETH_ALEN];
typedef struct _NDIS_802_11_AI_REQFI
{
- unsigned short Capabilities;
- unsigned short ListenInterval;
+ u16 Capabilities;
+ u16 ListenInterval;
NDIS_802_11_MAC_ADDRESS CurrentAPAddress;
} NDIS_802_11_AI_REQFI, *PNDIS_802_11_AI_REQFI;
typedef struct _NDIS_802_11_AI_RESFI
{
- unsigned short Capabilities;
- unsigned short StatusCode;
- unsigned short AssociationId;
+ u16 Capabilities;
+ u16 StatusCode;
+ u16 AssociationId;
} NDIS_802_11_AI_RESFI, *PNDIS_802_11_AI_RESFI;
typedef struct _NDIS_802_11_ASSOCIATION_INFORMATION
{
- unsigned long Length;
- unsigned short AvailableRequestFixedIEs;
- NDIS_802_11_AI_REQFI RequestFixedIEs;
- unsigned long RequestIELength;
- unsigned long OffsetRequestIEs;
- unsigned short AvailableResponseFixedIEs;
- NDIS_802_11_AI_RESFI ResponseFixedIEs;
- unsigned long ResponseIELength;
- unsigned long OffsetResponseIEs;
+ u32 Length;
+ u16 AvailableRequestFixedIEs;
+ NDIS_802_11_AI_REQFI RequestFixedIEs;
+ u32 RequestIELength;
+ u32 OffsetRequestIEs;
+ u16 AvailableResponseFixedIEs;
+ NDIS_802_11_AI_RESFI ResponseFixedIEs;
+ u32 ResponseIELength;
+ u32 OffsetResponseIEs;
} NDIS_802_11_ASSOCIATION_INFORMATION, *PNDIS_802_11_ASSOCIATION_INFORMATION;
typedef struct tagSAssocInfo {
- NDIS_802_11_ASSOCIATION_INFORMATION AssocInfo;
- BYTE abyIEs[WLAN_BEACON_FR_MAXLEN+WLAN_BEACON_FR_MAXLEN];
- // store ReqIEs set by OID_802_11_ASSOCIATION_INFORMATION
- unsigned long RequestIELength;
- BYTE abyReqIEs[WLAN_BEACON_FR_MAXLEN];
+ NDIS_802_11_ASSOCIATION_INFORMATION AssocInfo;
+ u8 abyIEs[WLAN_BEACON_FR_MAXLEN+WLAN_BEACON_FR_MAXLEN];
+ /* store ReqIEs set by OID_802_11_ASSOCIATION_INFORMATION */
+ u32 RequestIELength;
+ u8 abyReqIEs[WLAN_BEACON_FR_MAXLEN];
} SAssocInfo, *PSAssocInfo;
-//---
+
diff --git a/drivers/staging/vt6656/wpa2.c b/drivers/staging/vt6656/wpa2.c
index c092697..616e24d 100644
--- a/drivers/staging/vt6656/wpa2.c
+++ b/drivers/staging/vt6656/wpa2.c
@@ -31,8 +31,8 @@
*
*/
-#include "wpa2.h"
#include "device.h"
+#include "wpa2.h"
/*--------------------- Static Definitions -------------------------*/
static int msglevel =MSG_LEVEL_INFO;
diff --git a/drivers/staging/vt6656/wpa2.h b/drivers/staging/vt6656/wpa2.h
index 46c2959..c359252 100644
--- a/drivers/staging/vt6656/wpa2.h
+++ b/drivers/staging/vt6656/wpa2.h
@@ -45,8 +45,8 @@
} PMKIDInfo, *PPMKIDInfo;
typedef struct tagSPMKIDCache {
- unsigned long BSSIDInfoCount;
- PMKIDInfo BSSIDInfo[MAX_PMKID_CACHE];
+ u32 BSSIDInfoCount;
+ PMKIDInfo BSSIDInfo[MAX_PMKID_CACHE];
} SPMKIDCache, *PSPMKIDCache;
diff --git a/drivers/staging/vt6656/wpactl.c b/drivers/staging/vt6656/wpactl.c
index 3e65aa1..cc1d48b 100644
--- a/drivers/staging/vt6656/wpactl.c
+++ b/drivers/staging/vt6656/wpactl.c
@@ -44,13 +44,6 @@
/*--------------------- Static Definitions -------------------------*/
-#define VIAWGET_WPA_MAX_BUF_SIZE 1024
-
-static const int frequency_list[] = {
- 2412, 2417, 2422, 2427, 2432, 2437, 2442,
- 2447, 2452, 2457, 2462, 2467, 2472, 2484
-};
-
/*--------------------- Static Classes ----------------------------*/
/*--------------------- Static Variables --------------------------*/
@@ -59,118 +52,7 @@
/*--------------------- Static Functions --------------------------*/
/*--------------------- Export Variables --------------------------*/
-static void wpadev_setup(struct net_device *dev)
-{
- dev->type = ARPHRD_IEEE80211;
- dev->hard_header_len = ETH_HLEN;
- dev->mtu = 2048;
- dev->addr_len = ETH_ALEN;
- dev->tx_queue_len = 1000;
- memset(dev->broadcast, 0xFF, ETH_ALEN);
-
- dev->flags = IFF_BROADCAST | IFF_MULTICAST;
-}
-
-/*
- * Description:
- * register netdev for wpa supplicant daemon
- *
- * Parameters:
- * In:
- * pDevice -
- * enable -
- * Out:
- *
- * Return Value:
- *
- */
-static int wpa_init_wpadev(PSDevice pDevice)
-{
- PSDevice wpadev_priv;
- struct net_device *dev = pDevice->dev;
- int ret = 0;
-
- pDevice->wpadev = alloc_netdev(sizeof(PSDevice), "vntwpa", wpadev_setup);
- if (pDevice->wpadev == NULL)
- return -ENOMEM;
-
- wpadev_priv = netdev_priv(pDevice->wpadev);
- *wpadev_priv = *pDevice;
- memcpy(pDevice->wpadev->dev_addr, dev->dev_addr, ETH_ALEN);
- pDevice->wpadev->base_addr = dev->base_addr;
- pDevice->wpadev->irq = dev->irq;
- pDevice->wpadev->mem_start = dev->mem_start;
- pDevice->wpadev->mem_end = dev->mem_end;
- ret = register_netdev(pDevice->wpadev);
- if (ret) {
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "%s: register_netdev(WPA) failed!\n",
- dev->name);
- free_netdev(pDevice->wpadev);
- return -1;
- }
-
- if (pDevice->skb == NULL) {
- pDevice->skb = dev_alloc_skb((int)pDevice->rx_buf_sz);
- if (pDevice->skb == NULL)
- return -ENOMEM;
- }
-
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "%s: Registered netdev %s for WPA management\n",
- dev->name, pDevice->wpadev->name);
-
- return 0;
-}
-
-/*
- * Description:
- * unregister net_device (wpadev)
- *
- * Parameters:
- * In:
- * pDevice -
- * Out:
- *
- * Return Value:
- *
- */
-static int wpa_release_wpadev(PSDevice pDevice)
-{
- if (pDevice->skb) {
- dev_kfree_skb(pDevice->skb);
- pDevice->skb = NULL;
- }
-
- if (pDevice->wpadev) {
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "%s: Netdevice %s unregistered\n",
- pDevice->dev->name, pDevice->wpadev->name);
- unregister_netdev(pDevice->wpadev);
- free_netdev(pDevice->wpadev);
- pDevice->wpadev = NULL;
- }
-
- return 0;
-}
-
-/*
- * Description:
- * Set enable/disable dev for wpa supplicant daemon
- *
- * Parameters:
- * In:
- * pDevice -
- * val -
- * Out:
- *
- * Return Value:
- *
- */
-int wpa_set_wpadev(PSDevice pDevice, int val)
-{
- if (val)
- return wpa_init_wpadev(pDevice);
- return wpa_release_wpadev(pDevice);
-}
/*
* Description:
@@ -185,7 +67,7 @@
* Return Value:
*
*/
- int wpa_set_keys(PSDevice pDevice, void *ctx, BOOL fcpfkernel)
+int wpa_set_keys(PSDevice pDevice, void *ctx)
{
struct viawget_wpa_param *param = ctx;
PSMgmtObject pMgmt = &pDevice->sMgmtObj;
@@ -217,18 +99,7 @@
if (param->u.wpa_key.key && param->u.wpa_key.key_len > sizeof(abyKey))
return -EINVAL;
- spin_unlock_irq(&pDevice->lock);
- if (param->u.wpa_key.key && fcpfkernel) {
- memcpy(&abyKey[0], param->u.wpa_key.key, param->u.wpa_key.key_len);
- } else {
- if (param->u.wpa_key.key &&
- copy_from_user(&abyKey[0], param->u.wpa_key.key,
- param->u.wpa_key.key_len)) {
- spin_lock_irq(&pDevice->lock);
- return -EINVAL;
- }
- }
- spin_lock_irq(&pDevice->lock);
+ memcpy(&abyKey[0], param->u.wpa_key.key, param->u.wpa_key.key_len);
dwKeyIndex = (DWORD)(param->u.wpa_key.key_index);
@@ -260,18 +131,7 @@
if (param->u.wpa_key.seq && param->u.wpa_key.seq_len > sizeof(abySeq))
return -EINVAL;
- spin_unlock_irq(&pDevice->lock);
- if (param->u.wpa_key.seq && fcpfkernel) {
- memcpy(&abySeq[0], param->u.wpa_key.seq, param->u.wpa_key.seq_len);
- } else {
- if (param->u.wpa_key.seq &&
- copy_from_user(&abySeq[0], param->u.wpa_key.seq,
- param->u.wpa_key.seq_len)) {
- spin_lock_irq(&pDevice->lock);
- return -EINVAL;
- }
- }
- spin_lock_irq(&pDevice->lock);
+ memcpy(&abySeq[0], param->u.wpa_key.seq, param->u.wpa_key.seq_len);
if (param->u.wpa_key.seq_len > 0) {
for (ii = 0 ; ii < param->u.wpa_key.seq_len ; ii++) {
@@ -399,521 +259,3 @@
}
-/*
- * Description:
- * enable wpa auth & mode
- *
- * Parameters:
- * In:
- * pDevice -
- * param -
- * Out:
- *
- * Return Value:
- *
- */
-static int wpa_set_wpa(PSDevice pDevice, struct viawget_wpa_param *param)
-{
- PSMgmtObject pMgmt = &pDevice->sMgmtObj;
- int ret = 0;
-
- pMgmt->eAuthenMode = WMAC_AUTH_OPEN;
- pMgmt->bShareKeyAlgorithm = FALSE;
-
- return ret;
-}
-
- /*
- * Description:
- * set disassociate
- *
- * Parameters:
- * In:
- * pDevice -
- * param -
- * Out:
- *
- * Return Value:
- *
- */
-static int wpa_set_disassociate(PSDevice pDevice, struct viawget_wpa_param *param)
-{
- PSMgmtObject pMgmt = &pDevice->sMgmtObj;
- int ret = 0;
-
- spin_lock_irq(&pDevice->lock);
- if (pDevice->bLinkPass) {
- if (!memcmp(param->addr, pMgmt->abyCurrBSSID, 6))
- bScheduleCommand((void *)pDevice, WLAN_CMD_DISASSOCIATE, NULL);
- }
- spin_unlock_irq(&pDevice->lock);
-
- return ret;
-}
-
-/*
- * Description:
- * enable scan process
- *
- * Parameters:
- * In:
- * pDevice -
- * param -
- * Out:
- *
- * Return Value:
- *
- */
-static int wpa_set_scan(PSDevice pDevice, struct viawget_wpa_param *param)
-{
- int ret = 0;
-
-/**set ap_scan=1&&scan_ssid=1 under hidden ssid mode**/
- PSMgmtObject pMgmt = &pDevice->sMgmtObj;
- PWLAN_IE_SSID pItemSSID;
- printk("wpa_set_scan-->desired [ssid=%s,ssid_len=%d]\n",
- param->u.scan_req.ssid,param->u.scan_req.ssid_len);
-// Set the SSID
- memset(pMgmt->abyDesireSSID, 0, WLAN_IEHDR_LEN + WLAN_SSID_MAXLEN + 1);
- pItemSSID = (PWLAN_IE_SSID)pMgmt->abyDesireSSID;
- pItemSSID->byElementID = WLAN_EID_SSID;
- memcpy(pItemSSID->abySSID, param->u.scan_req.ssid, param->u.scan_req.ssid_len);
- pItemSSID->len = param->u.scan_req.ssid_len;
-
- spin_lock_irq(&pDevice->lock);
- BSSvClearBSSList((void *) pDevice, pDevice->bLinkPass);
- bScheduleCommand((void *) pDevice, WLAN_CMD_BSSID_SCAN,
- pMgmt->abyDesireSSID);
- spin_unlock_irq(&pDevice->lock);
-
- return ret;
-}
-
-/*
- * Description:
- * get bssid
- *
- * Parameters:
- * In:
- * pDevice -
- * param -
- * Out:
- *
- * Return Value:
- *
- */
-static int wpa_get_bssid(PSDevice pDevice, struct viawget_wpa_param *param)
-{
- PSMgmtObject pMgmt = &pDevice->sMgmtObj;
- int ret = 0;
- memcpy(param->u.wpa_associate.bssid, pMgmt->abyCurrBSSID, 6);
-
- return ret;
-}
-
-/*
- * Description:
- * get bssid
- *
- * Parameters:
- * In:
- * pDevice -
- * param -
- * Out:
- *
- * Return Value:
- *
- */
-static int wpa_get_ssid(PSDevice pDevice, struct viawget_wpa_param *param)
-{
- PSMgmtObject pMgmt = &pDevice->sMgmtObj;
- PWLAN_IE_SSID pItemSSID;
- int ret = 0;
-
- pItemSSID = (PWLAN_IE_SSID)pMgmt->abyCurrSSID;
-
- memcpy(param->u.wpa_associate.ssid, pItemSSID->abySSID, pItemSSID->len);
- param->u.wpa_associate.ssid_len = pItemSSID->len;
-
- return ret;
-}
-
-/*
- * Description:
- * get scan results
- *
- * Parameters:
- * In:
- * pDevice -
- * param -
- * Out:
- *
- * Return Value:
- *
- */
-static int wpa_get_scan(PSDevice pDevice, struct viawget_wpa_param *param)
-{
- struct viawget_scan_result *scan_buf;
- PSMgmtObject pMgmt = &pDevice->sMgmtObj;
- PWLAN_IE_SSID pItemSSID;
- PKnownBSS pBSS;
- PBYTE pBuf;
- int ret = 0;
- u16 count = 0;
- u16 ii;
- u16 jj;
- long ldBm; //James //add
-
-//******mike:bubble sort by stronger RSSI*****//
- PBYTE ptempBSS;
-
- ptempBSS = kmalloc(sizeof(KnownBSS), GFP_ATOMIC);
-
- if (ptempBSS == NULL) {
- printk("bubble sort kmalloc memory fail@@@\n");
- ret = -ENOMEM;
- return ret;
- }
-
- for (ii = 0; ii < MAX_BSS_NUM; ii++) {
- for (jj = 0; jj < MAX_BSS_NUM - ii - 1; jj++) {
- if ((pMgmt->sBSSList[jj].bActive != TRUE)
- || ((pMgmt->sBSSList[jj].uRSSI > pMgmt->sBSSList[jj + 1].uRSSI)
- && (pMgmt->sBSSList[jj + 1].bActive != FALSE))) {
- memcpy(ptempBSS,&pMgmt->sBSSList[jj], sizeof(KnownBSS));
- memcpy(&pMgmt->sBSSList[jj], &pMgmt->sBSSList[jj + 1],
- sizeof(KnownBSS));
- memcpy(&pMgmt->sBSSList[jj + 1], ptempBSS, sizeof(KnownBSS));
- }
- }
- }
- kfree(ptempBSS);
-
- count = 0;
- pBSS = &(pMgmt->sBSSList[0]);
- for (ii = 0; ii < MAX_BSS_NUM; ii++) {
- pBSS = &(pMgmt->sBSSList[ii]);
- if (!pBSS->bActive)
- continue;
- count++;
- }
-
- pBuf = kcalloc(count, sizeof(struct viawget_scan_result), GFP_ATOMIC);
-
- if (pBuf == NULL) {
- ret = -ENOMEM;
- return ret;
- }
- scan_buf = (struct viawget_scan_result *)pBuf;
- pBSS = &(pMgmt->sBSSList[0]);
- for (ii = 0, jj = 0; ii < MAX_BSS_NUM; ii++) {
- pBSS = &(pMgmt->sBSSList[ii]);
- if (pBSS->bActive) {
- if (jj >= count)
- break;
- memcpy(scan_buf->bssid, pBSS->abyBSSID, WLAN_BSSID_LEN);
- pItemSSID = (PWLAN_IE_SSID)pBSS->abySSID;
- memcpy(scan_buf->ssid, pItemSSID->abySSID, pItemSSID->len);
- scan_buf->ssid_len = pItemSSID->len;
- scan_buf->freq = frequency_list[pBSS->uChannel-1];
- scan_buf->caps = pBSS->wCapInfo; // DavidWang for sharemode
-
- RFvRSSITodBm(pDevice, (BYTE)(pBSS->uRSSI), &ldBm);
- if (-ldBm < 50)
- scan_buf->qual = 100;
- else if (-ldBm > 90)
- scan_buf->qual = 0;
- else
- scan_buf->qual=(40-(-ldBm-50))*100/40;
-
- //James
- //scan_buf->caps = pBSS->wCapInfo;
- //scan_buf->qual =
- scan_buf->noise = 0;
- scan_buf->level = ldBm;
-
- //scan_buf->maxrate =
- if (pBSS->wWPALen != 0) {
- scan_buf->wpa_ie_len = pBSS->wWPALen;
- memcpy(scan_buf->wpa_ie, pBSS->byWPAIE, pBSS->wWPALen);
- }
- if (pBSS->wRSNLen != 0) {
- scan_buf->rsn_ie_len = pBSS->wRSNLen;
- memcpy(scan_buf->rsn_ie, pBSS->byRSNIE, pBSS->wRSNLen);
- }
- scan_buf = (struct viawget_scan_result *)((PBYTE)scan_buf + sizeof(struct viawget_scan_result));
- jj ++;
- }
- }
-
- if (jj < count)
- count = jj;
-
- if (copy_to_user(param->u.scan_results.buf, pBuf, sizeof(struct viawget_scan_result) * count))
- ret = -EFAULT;
-
- param->u.scan_results.scan_count = count;
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO " param->u.scan_results.scan_count = %d\n", count);
-
- kfree(pBuf);
- return ret;
-}
-
-/*
- * Description:
- * set associate with AP
- *
- * Parameters:
- * In:
- * pDevice -
- * param -
- * Out:
- *
- * Return Value:
- *
- */
-static int wpa_set_associate(PSDevice pDevice, struct viawget_wpa_param *param)
-{
- PSMgmtObject pMgmt = &pDevice->sMgmtObj;
- PWLAN_IE_SSID pItemSSID;
- BYTE abyNullAddr[] = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
- BYTE abyWPAIE[64];
- int ret = 0;
- BOOL bwepEnabled=FALSE;
-
- // set key type & algorithm
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "pairwise_suite = %d\n", param->u.wpa_associate.pairwise_suite);
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "group_suite = %d\n", param->u.wpa_associate.group_suite);
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "key_mgmt_suite = %d\n", param->u.wpa_associate.key_mgmt_suite);
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "auth_alg = %d\n", param->u.wpa_associate.auth_alg);
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "mode = %d\n", param->u.wpa_associate.mode);
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "wpa_ie_len = %d\n", param->u.wpa_associate.wpa_ie_len);
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Roaming dBm = %d\n", param->u.wpa_associate.roam_dbm); // Davidwang
-
- if (param->u.wpa_associate.wpa_ie) {
- if (param->u.wpa_associate.wpa_ie_len > sizeof(abyWPAIE))
- return -EINVAL;
-
- if (copy_from_user(&abyWPAIE[0], param->u.wpa_associate.wpa_ie,
- param->u.wpa_associate.wpa_ie_len))
- return -EFAULT;
- }
-
- if (param->u.wpa_associate.mode == 1)
- pMgmt->eConfigMode = WMAC_CONFIG_IBSS_STA;
- else
- pMgmt->eConfigMode = WMAC_CONFIG_ESS_STA;
-
- // set bssid
- if (memcmp(param->u.wpa_associate.bssid, &abyNullAddr[0], 6) != 0)
- memcpy(pMgmt->abyDesireBSSID, param->u.wpa_associate.bssid, 6);
- // set ssid
- memset(pMgmt->abyDesireSSID, 0, WLAN_IEHDR_LEN + WLAN_SSID_MAXLEN + 1);
- pItemSSID = (PWLAN_IE_SSID)pMgmt->abyDesireSSID;
- pItemSSID->byElementID = WLAN_EID_SSID;
- pItemSSID->len = param->u.wpa_associate.ssid_len;
- memcpy(pItemSSID->abySSID, param->u.wpa_associate.ssid, pItemSSID->len);
-
- if (param->u.wpa_associate.wpa_ie_len == 0) {
- if (param->u.wpa_associate.auth_alg & AUTH_ALG_SHARED_KEY)
- pMgmt->eAuthenMode = WMAC_AUTH_SHAREKEY;
- else
- pMgmt->eAuthenMode = WMAC_AUTH_OPEN;
- } else if (abyWPAIE[0] == RSN_INFO_ELEM) {
- if (param->u.wpa_associate.key_mgmt_suite == KEY_MGMT_PSK)
- pMgmt->eAuthenMode = WMAC_AUTH_WPA2PSK;
- else
- pMgmt->eAuthenMode = WMAC_AUTH_WPA2;
- } else {
- if (param->u.wpa_associate.key_mgmt_suite == KEY_MGMT_WPA_NONE)
- pMgmt->eAuthenMode = WMAC_AUTH_WPANONE;
- else if (param->u.wpa_associate.key_mgmt_suite == KEY_MGMT_PSK)
- pMgmt->eAuthenMode = WMAC_AUTH_WPAPSK;
- else
- pMgmt->eAuthenMode = WMAC_AUTH_WPA;
- }
-
- switch (param->u.wpa_associate.pairwise_suite) {
- case CIPHER_CCMP:
- pDevice->eEncryptionStatus = Ndis802_11Encryption3Enabled;
- break;
- case CIPHER_TKIP:
- pDevice->eEncryptionStatus = Ndis802_11Encryption2Enabled;
- break;
- case CIPHER_WEP40:
- case CIPHER_WEP104:
- pDevice->eEncryptionStatus = Ndis802_11Encryption1Enabled;
- bwepEnabled = TRUE;
- break;
- case CIPHER_NONE:
- if (param->u.wpa_associate.group_suite == CIPHER_CCMP)
- pDevice->eEncryptionStatus = Ndis802_11Encryption3Enabled;
- else
- pDevice->eEncryptionStatus = Ndis802_11Encryption2Enabled;
- break;
- default:
- pDevice->eEncryptionStatus = Ndis802_11EncryptionDisabled;
- }
-
- pMgmt->Roam_dbm = param->u.wpa_associate.roam_dbm;
- if (pMgmt->eAuthenMode == WMAC_AUTH_SHAREKEY) { // @wep-sharekey
- pDevice->eEncryptionStatus = Ndis802_11Encryption1Enabled;
- pMgmt->bShareKeyAlgorithm = TRUE;
- } else if (pMgmt->eAuthenMode == WMAC_AUTH_OPEN) {
- if(bwepEnabled==TRUE) { //@open-wep
- pDevice->eEncryptionStatus = Ndis802_11Encryption1Enabled;
- } else {
- // @only open
- pDevice->eEncryptionStatus = Ndis802_11EncryptionDisabled;
- }
- }
- // mike save old encryption status
- pDevice->eOldEncryptionStatus = pDevice->eEncryptionStatus;
-
- if (pDevice->eEncryptionStatus != Ndis802_11EncryptionDisabled)
- pDevice->bEncryptionEnable = TRUE;
- else
- pDevice->bEncryptionEnable = FALSE;
-
- if ((pMgmt->eAuthenMode == WMAC_AUTH_SHAREKEY) ||
- ((pMgmt->eAuthenMode == WMAC_AUTH_OPEN) && (bwepEnabled==TRUE))) {
- // mike re-comment:open-wep && sharekey-wep needn't do initial key!!
- } else {
- KeyvInitTable(pDevice,&pDevice->sKey);
- }
-
- spin_lock_irq(&pDevice->lock);
- pDevice->bLinkPass = FALSE;
- ControlvMaskByte(pDevice, MESSAGE_REQUEST_MACREG, MAC_REG_PAPEDELAY, LEDSTS_STS, LEDSTS_SLOW);
- memset(pMgmt->abyCurrBSSID, 0, 6);
- pMgmt->eCurrState = WMAC_STATE_IDLE;
- netif_stop_queue(pDevice->dev);
-
-/******* search if ap_scan=2, which is associating request in hidden ssid mode ****/
- {
- PKnownBSS pCurr = NULL;
- pCurr = BSSpSearchBSSList(pDevice,
- pMgmt->abyDesireBSSID,
- pMgmt->abyDesireSSID,
- pDevice->eConfigPHYMode
- );
-
- if (pCurr == NULL){
- printk("wpa_set_associate---->hidden mode site survey before associate.......\n");
- bScheduleCommand((void *)pDevice,
- WLAN_CMD_BSSID_SCAN,
- pMgmt->abyDesireSSID);
- }
- }
-/****************************************************************/
-
- bScheduleCommand((void *)pDevice, WLAN_CMD_SSID, NULL);
- spin_unlock_irq(&pDevice->lock);
-
- return ret;
-}
-
-/*
- * Description:
- * wpa_ioctl main function supported for wpa supplicant
- *
- * Parameters:
- * In:
- * pDevice -
- * iw_point -
- * Out:
- *
- * Return Value:
- *
- */
-int wpa_ioctl(PSDevice pDevice, struct iw_point *p)
-{
- struct viawget_wpa_param *param;
- int ret = 0;
- int wpa_ioctl = 0;
-
- if (p->length < sizeof(struct viawget_wpa_param) ||
- p->length > VIAWGET_WPA_MAX_BUF_SIZE || !p->pointer)
- return -EINVAL;
-
- param = kmalloc((int)p->length, GFP_KERNEL);
- if (param == NULL)
- return -ENOMEM;
-
- if (copy_from_user(param, p->pointer, p->length)) {
- ret = -EFAULT;
- goto out;
- }
-
- switch (param->cmd) {
- case VIAWGET_SET_WPA:
- ret = wpa_set_wpa(pDevice, param);
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "VIAWGET_SET_WPA \n");
- break;
-
- case VIAWGET_SET_KEY:
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "VIAWGET_SET_KEY \n");
- spin_lock_irq(&pDevice->lock);
- ret = wpa_set_keys(pDevice, param, FALSE);
- spin_unlock_irq(&pDevice->lock);
- break;
-
- case VIAWGET_SET_SCAN:
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "VIAWGET_SET_SCAN \n");
- ret = wpa_set_scan(pDevice, param);
- break;
-
- case VIAWGET_GET_SCAN:
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "VIAWGET_GET_SCAN\n");
- ret = wpa_get_scan(pDevice, param);
- wpa_ioctl = 1;
- break;
-
- case VIAWGET_GET_SSID:
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "VIAWGET_GET_SSID \n");
- ret = wpa_get_ssid(pDevice, param);
- wpa_ioctl = 1;
- break;
-
- case VIAWGET_GET_BSSID:
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "VIAWGET_GET_BSSID \n");
- ret = wpa_get_bssid(pDevice, param);
- wpa_ioctl = 1;
- break;
-
- case VIAWGET_SET_ASSOCIATE:
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "VIAWGET_SET_ASSOCIATE \n");
- ret = wpa_set_associate(pDevice, param);
- break;
-
- case VIAWGET_SET_DISASSOCIATE:
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "VIAWGET_SET_DISASSOCIATE \n");
- ret = wpa_set_disassociate(pDevice, param);
- break;
-
- case VIAWGET_SET_DROP_UNENCRYPT:
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "VIAWGET_SET_DROP_UNENCRYPT \n");
- break;
-
- case VIAWGET_SET_DEAUTHENTICATE:
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "VIAWGET_SET_DEAUTHENTICATE \n");
- break;
-
- default:
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "wpa_ioctl: unknown cmd=%d\n",
- param->cmd);
- kfree(param);
- return -EOPNOTSUPP;
- }
-
- if ((ret == 0) && wpa_ioctl) {
- if (copy_to_user(p->pointer, param, p->length)) {
- ret = -EFAULT;
- goto out;
- }
- }
-
-out:
- kfree(param);
- return ret;
-}
diff --git a/drivers/staging/vt6656/wpactl.h b/drivers/staging/vt6656/wpactl.h
index 00c8451..b4ec6b0 100644
--- a/drivers/staging/vt6656/wpactl.h
+++ b/drivers/staging/vt6656/wpactl.h
@@ -30,9 +30,7 @@
#define __WPACTL_H__
#include "device.h"
-#ifdef WPA_SUPPLICANT_DRIVER_WEXT_SUPPORT
#include "iowpa.h"
-#endif
/*--------------------- Export Definitions -------------------------*/
@@ -40,17 +38,11 @@
//WPA related
typedef enum { WPA_ALG_NONE, WPA_ALG_WEP, WPA_ALG_TKIP, WPA_ALG_CCMP } wpa_alg;
-typedef enum { CIPHER_NONE, CIPHER_WEP40, CIPHER_TKIP, CIPHER_CCMP,
- CIPHER_WEP104 } wpa_cipher;
-typedef enum { KEY_MGMT_802_1X, KEY_MGMT_PSK, KEY_MGMT_NONE,
- KEY_MGMT_802_1X_NO_WPA, KEY_MGMT_WPA_NONE, KEY_MGMT_CCKM } wpa_key_mgmt;//20080717-02,<Modify> by James Li
#define AUTH_ALG_OPEN_SYSTEM 0x01
#define AUTH_ALG_SHARED_KEY 0x02
#define AUTH_ALG_LEAP 0x04
-#define GENERIC_INFO_ELEM 0xdd
-#define RSN_INFO_ELEM 0x30
typedef unsigned long long NDIS_802_11_KEY_RSC;
@@ -60,8 +52,6 @@
/*--------------------- Export Functions --------------------------*/
-int wpa_set_wpadev(PSDevice pDevice, int val);
-int wpa_ioctl(PSDevice pDevice, struct iw_point *p);
-int wpa_set_keys(PSDevice pDevice, void *ctx, BOOL fcpfkernel);
+int wpa_set_keys(PSDevice pDevice, void *ctx);
#endif /* __WPACL_H__ */
diff --git a/drivers/staging/winbond/mds.c b/drivers/staging/winbond/mds.c
index 1b8b8ac..faa93f0 100644
--- a/drivers/staging/winbond/mds.c
+++ b/drivers/staging/winbond/mds.c
@@ -315,7 +315,7 @@
pT00->T00_tx_packet_id = pDes->Descriptor_ID; /* Set packet ID */
pT00->T00_header_length = 24; /* Set header length */
- pT01->T01_retry_abort_ebable = 1; /* 921013 931130.5.h */
+ pT01->T01_retry_abort_enable = 1; /* 921013 931130.5.h */
/* Key ID setup */
pT01->T01_wep_id = 0;
@@ -476,11 +476,8 @@
/* 931130.5.b */
FragmentCount = PacketSize/FragmentThreshold + 1;
stmp = PacketSize + FragmentCount*32 + 8; /* 931130.5.c 8:MIC */
- if ((XmitBufSize + stmp) >= MAX_USB_TX_BUFFER) {
- printk("[Mds_Tx] Excess max tx buffer.\n");
+ if ((XmitBufSize + stmp) >= MAX_USB_TX_BUFFER)
break; /* buffer is not enough */
- }
-
/*
* Start transmitting
diff --git a/drivers/staging/winbond/wb35rx_f.h b/drivers/staging/winbond/wb35rx_f.h
index 1fdf65e..559bdca 100644
--- a/drivers/staging/winbond/wb35rx_f.h
+++ b/drivers/staging/winbond/wb35rx_f.h
@@ -4,12 +4,12 @@
#include <net/mac80211.h>
#include "wbhal.h"
-//====================================
-// Interface function declare
-//====================================
-unsigned char Wb35Rx_initial( struct hw_data * pHwData );
-void Wb35Rx_destroy( struct hw_data * pHwData );
-void Wb35Rx_stop( struct hw_data * pHwData );
+/*
+ * Interface function declaration
+ */
+unsigned char Wb35Rx_initial(struct hw_data *pHwData);
+void Wb35Rx_destroy(struct hw_data *pHwData);
+void Wb35Rx_stop(struct hw_data *pHwData);
void Wb35Rx_start(struct ieee80211_hw *hw);
#endif
diff --git a/drivers/staging/winbond/wb35rx_s.h b/drivers/staging/winbond/wb35rx_s.h
index 4b03274..545bc95 100644
--- a/drivers/staging/winbond/wb35rx_s.h
+++ b/drivers/staging/winbond/wb35rx_s.h
@@ -1,44 +1,44 @@
-//============================================================================
-// wb35rx.h --
-//============================================================================
+#ifndef __WINBOND_35RX_S_H
+#define __WINBOND_35RX_S_H
-// Definition for this module used
-#define MAX_USB_RX_BUFFER 4096 // This parameter must be 4096 931130.4.f
-
-#define MAX_USB_RX_BUFFER_NUMBER ETHERNET_RX_DESCRIPTORS // Maximum 254, 255 is RESERVED ID
-#define RX_INTERFACE 0 // Interface 1
-#define RX_PIPE 2 // Pipe 3
-#define MAX_PACKET_SIZE 1600 //1568 // 8 + 1532 + 4 + 24(IV EIV MIC ICV CRC) for check DMA data 931130.4.g
-#define RX_END_TAG 0x0badbeef
+/* Definition for this module used */
+#define MAX_USB_RX_BUFFER 4096 /* This parameter must be 4096 931130.4.f */
+#define MAX_USB_RX_BUFFER_NUMBER ETHERNET_RX_DESCRIPTORS /* Maximum 254, 255 is RESERVED ID */
+#define RX_INTERFACE 0 /* Interface 1 */
+#define RX_PIPE 2 /* Pipe 3 */
+#define MAX_PACKET_SIZE 1600 /* 1568 = 8 + 1532 + 4 + 24(IV EIV MIC ICV CRC) for check DMA data 931130.4.g */
+#define RX_END_TAG 0x0badbeef
-//====================================
-// Internal variable for module
-//====================================
+/*
+ * Internal variable for module
+ */
struct wb35_rx {
- u32 ByteReceived;// For calculating throughput of BulkIn
- atomic_t RxFireCounter;// Does Wb35Rx module fire?
+ u32 ByteReceived; /* For calculating throughput of BulkIn */
+ atomic_t RxFireCounter;/* Does Wb35Rx module fire? */
- u8 RxBuffer[ MAX_USB_RX_BUFFER_NUMBER ][ ((MAX_USB_RX_BUFFER+3) & ~0x03 ) ];
- u16 RxBufferSize[ ((MAX_USB_RX_BUFFER_NUMBER+1) & ~0x01) ];
- u8 RxOwner[ ((MAX_USB_RX_BUFFER_NUMBER+3) & ~0x03 ) ];//Ownership of buffer 0: SW 1:HW
+ u8 RxBuffer[MAX_USB_RX_BUFFER_NUMBER][((MAX_USB_RX_BUFFER+3) & ~0x03)];
+ u16 RxBufferSize[((MAX_USB_RX_BUFFER_NUMBER+1) & ~0x01)];
+ u8 RxOwner[((MAX_USB_RX_BUFFER_NUMBER+3) & ~0x03)]; /* Ownership of buffer 0:SW 1:HW */
- u32 RxProcessIndex;//The next index to process
- u32 RxBufferId;
- u32 EP3vm_state;
+ u32 RxProcessIndex; /* The next index to process */
+ u32 RxBufferId;
+ u32 EP3vm_state;
- u32 rx_halt; // For VM stopping
+ u32 rx_halt; /* For VM stopping */
- u16 MoreDataSize;
- u16 PacketSize;
+ u16 MoreDataSize;
+ u16 PacketSize;
- u32 CurrentRxBufferId; // For complete routine usage
- u32 Rx3UrbCancel;
+ u32 CurrentRxBufferId; /* For complete routine usage */
+ u32 Rx3UrbCancel;
- u32 LastR1; // For RSSI reporting
- struct urb * RxUrb;
- u32 Ep3ErrorCount2; // 20060625.1 Usbd for Rx DMA error count
+ u32 LastR1; /* For RSSI reporting */
+ struct urb *RxUrb;
+ u32 Ep3ErrorCount2; /* 20060625.1 Usbd for Rx DMA error count */
int EP3VM_status;
- u8 * pDRx;
+ u8 *pDRx;
};
+
+#endif /* __WINBOND_35RX_S_H */
diff --git a/drivers/staging/winbond/wbhal.h b/drivers/staging/winbond/wbhal.h
index 39e84a0..289ee54 100644
--- a/drivers/staging/winbond/wbhal.h
+++ b/drivers/staging/winbond/wbhal.h
@@ -226,11 +226,11 @@
u32 T01_add_challenge_text:1;
u32 T01_inhibit_crc:1;
u32 T01_loop_back_wep_mode:1;
- u32 T01_retry_abort_ebable:1;
+ u32 T01_retry_abort_enable:1;
};
#else
struct {
- u32 T01_retry_abort_ebable:1;
+ u32 T01_retry_abort_enable:1;
u32 T01_loop_back_wep_mode:1;
u32 T01_inhibit_crc:1;
u32 T01_add_challenge_text:1;
diff --git a/drivers/staging/winbond/wbusb.c b/drivers/staging/winbond/wbusb.c
index 48aa136..3fa1ae4 100644
--- a/drivers/staging/winbond/wbusb.c
+++ b/drivers/staging/winbond/wbusb.c
@@ -79,18 +79,15 @@
static void wbsoft_remove_interface(struct ieee80211_hw *dev,
struct ieee80211_vif *vif)
{
- printk("wbsoft_remove interface called\n");
}
static void wbsoft_stop(struct ieee80211_hw *hw)
{
- printk(KERN_INFO "%s called\n", __func__);
}
static int wbsoft_get_stats(struct ieee80211_hw *hw,
struct ieee80211_low_level_stats *stats)
{
- printk(KERN_INFO "%s called\n", __func__);
return 0;
}
@@ -179,12 +176,9 @@
if (pHwData->SurpriseRemove)
return;
- printk("Going to channel: %d/%d\n", channel.band, channel.ChanNo);
-
RFSynthesizer_SwitchingChannel(pHwData, channel); /* Switch channel */
pHwData->Channel = channel.ChanNo;
pHwData->band = channel.band;
- pr_debug("Set channel is %d, band =%d\n", pHwData->Channel, pHwData->band);
reg->M28_MacControl &= ~0xff; /* Clean channel information field */
reg->M28_MacControl |= channel.ChanNo;
Wb35Reg_WriteWithCallbackValue(pHwData, 0x0828, reg->M28_MacControl,
@@ -264,8 +258,6 @@
struct wbsoft_priv *priv = dev->priv;
struct chan_info ch;
- printk("wbsoft_config called\n");
-
/* Should use channel_num, or something, as that is already pre-translated */
ch.band = 1;
ch.ChanNo = 1;
@@ -282,7 +274,6 @@
static u64 wbsoft_get_tsf(struct ieee80211_hw *dev, struct ieee80211_vif *vif)
{
- printk("wbsoft_get_tsf called\n");
return 0;
}
@@ -716,7 +707,6 @@
}
priv->sLocalPara.bAntennaNo = hal_get_antenna_number(pHwData);
- pr_debug("Driver init, antenna no = %d\n", priv->sLocalPara.bAntennaNo);
hal_get_hw_radio_off(pHwData);
/* Waiting for HAL setting OK */
@@ -782,9 +772,6 @@
interface = intf->cur_altsetting;
endpoint = &interface->endpoint[0].desc;
- if (endpoint[2].wMaxPacketSize == 512)
- printk("[w35und] Working on USB 2.0\n");
-
err = wb35_hw_init(dev);
if (err)
goto error_free_hw;
@@ -836,7 +823,6 @@
{
/* Turn off Rx and Tx hardware ability */
hal_stop(&adapter->sHwData);
- pr_debug("[w35und] Hal_stop O.K.\n");
/* Waiting Irp completed */
msleep(100);
diff --git a/drivers/staging/wlags49_h2/ap_h2.c b/drivers/staging/wlags49_h2/ap_h2.c
index eb8244c..e524153 100644
--- a/drivers/staging/wlags49_h2/ap_h2.c
+++ b/drivers/staging/wlags49_h2/ap_h2.c
@@ -25,10 +25,10 @@
*/
-#include "hcfcfg.h" /* to get hcf_16 etc defined as well as */
+#include "hcfcfg.h" /* to get hcf_16 etc defined as well as */
/* possible settings which inluence mdd.h or dhf.h */
-#include "mdd.h" /* to get COMP_ID_STA etc defined */
-#include "dhf.h" /* used to be "fhfmem.h", to get memblock,plugrecord, */
+#include "mdd.h" /* to get COMP_ID_STA etc defined */
+#include "dhf.h" /* used to be "fhfmem.h", to get memblock,plugrecord, */
static const hcf_8 fw_image_1_data[] = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
@@ -3301,7 +3301,7 @@
COMP_ROLE_SUPL,
COMP_ID_APF,
{
- { 2, 2, 4 } /* variant, bottom, top */
+ { 2, 2, 4 } /* variant, bottom, top */
}
},
{ 3 + ((20 * sizeof(CFG_RANGE_SPEC_STRCT)) / sizeof(hcf_16)),
@@ -3309,9 +3309,9 @@
COMP_ROLE_ACT,
COMP_ID_MFI,
{
- { 4, 6, 7 }, /* variant, bottom, top */
- { 5, 6, 7 }, /* variant, bottom, top */
- { 6, 6, 7 } /* variant, bottom, top */
+ { 4, 6, 7 }, /* variant, bottom, top */
+ { 5, 6, 7 }, /* variant, bottom, top */
+ { 6, 6, 7 } /* variant, bottom, top */
}
},
{ 3 + ((20 * sizeof(CFG_RANGE_SPEC_STRCT)) / sizeof(hcf_16)),
@@ -3319,7 +3319,7 @@
COMP_ROLE_ACT,
COMP_ID_CFI,
{
- { 2, 1, 2 } /* variant, bottom, top */
+ { 2, 1, 2 } /* variant, bottom, top */
}
},
{ 0000, 0000, 0000, 0000, { { 0000, 0000, 0000 } } } /* endsentinel */
diff --git a/drivers/staging/wlags49_h2/man/wlags49.4 b/drivers/staging/wlags49_h2/man/wlags49.4
index a345885..37df998 100644
--- a/drivers/staging/wlags49_h2/man/wlags49.4
+++ b/drivers/staging/wlags49_h2/man/wlags49.4
@@ -108,7 +108,7 @@
\- Card power management
\- Support for Hermes-II & Hermes-II.5 based PCMCIA, Mini PCI, and CardBus cards
\- Wired Equivalent Privacy (WEP)
- \- WPA-PSK support (EXPERIMENTAL)
+ \- WPA-PSK support
\- Driver utility interface (UIL)
\- Wireless Extensions
\- Software AP mode
diff --git a/drivers/staging/wlags49_h2/wl_if.h b/drivers/staging/wlags49_h2/wl_if.h
index 6d66dab..425d373 100644
--- a/drivers/staging/wlags49_h2/wl_if.h
+++ b/drivers/staging/wlags49_h2/wl_if.h
@@ -71,45 +71,39 @@
#define MAX_LTV_BUF_SIZE (512 - (sizeof(hcf_16) * 2))
#define HCF_TALLIES_SIZE (sizeof(CFG_HERMES_TALLIES_STRCT) + \
- (sizeof(hcf_16) * 2))
+ (sizeof(hcf_16) * 2))
#define HCF_MAX_MULTICAST 16
#define HCF_MAX_NAME_LEN 32
-#define MAX_LINE_SIZE 256
+#define MAX_LINE_SIZE 256
#define HCF_NUM_IO_PORTS 0x80
#define TX_TIMEOUT ((800 * HZ) / 1000)
-//#define HCF_MIN_COMM_QUALITY 0
-//#define HCF_MAX_COMM_QUALITY 92
-//#define HCF_MIN_SIGNAL_LEVEL 47
-//#define HCF_MAX_SIGNAL_LEVEL 138
-//#define HCF_MIN_NOISE_LEVEL 47
-//#define HCF_MAX_NOISE_LEVEL 138
-//#define HCF_0DBM_OFFSET 149
-
-// PE1DNN
-// Better data from the real world. Not scientific but empirical data gathered
-// from a Thomson Speedtouch 110 which is identified as:
-// PCMCIA Info: "Agere Systems" "Wireless PC Card Model 0110"
-// Manufacture ID: 0156,0003
-// Lowest measurment for noise floor seen is value 54
-// Highest signal strength in close proximity to the AP seen is value 118
-// Very good must be around 100 (otherwise its never "full scale"
-// All other constants are derrived from these. This makes the signal gauge
-// work for me...
+/* PE1DNN
+ * Better data from the real world. Not scientific but empirical data gathered
+ * from a Thomson Speedtouch 110 which is identified as:
+ * PCMCIA Info: "Agere Systems" "Wireless PC Card Model 0110"
+ * Manufacture ID: 0156,0003
+ * Lowest measurment for noise floor seen is value 54
+ * Highest signal strength in close proximity to the AP seen is value 118
+ * Very good must be around 100 (otherwise its never "full scale"
+ * All other constants are derrived from these. This makes the signal gauge
+ * work for me...
+ */
#define HCF_MIN_SIGNAL_LEVEL 54
#define HCF_MAX_SIGNAL_LEVEL 100
#define HCF_MIN_NOISE_LEVEL HCF_MIN_SIGNAL_LEVEL
#define HCF_MAX_NOISE_LEVEL HCF_MAX_SIGNAL_LEVEL
#define HCF_0DBM_OFFSET (HCF_MAX_SIGNAL_LEVEL + 1)
#define HCF_MIN_COMM_QUALITY 0
-#define HCF_MAX_COMM_QUALITY (HCF_MAX_SIGNAL_LEVEL - HCF_MIN_NOISE_LEVEL + 1)
+#define HCF_MAX_COMM_QUALITY (HCF_MAX_SIGNAL_LEVEL - \
+ HCF_MIN_NOISE_LEVEL + 1)
/* For encryption (WEP) */
-#define MIN_KEY_SIZE 5 // 40 bits RC4 - WEP
-#define MAX_KEY_SIZE 13 // 104 bits
+#define MIN_KEY_SIZE 5 /* 40 bits RC4 - WEP */
+#define MAX_KEY_SIZE 13 /* 104 bits */
#define MAX_KEYS 4
#define RADIO_CHANNELS 14
@@ -121,12 +115,12 @@
#define MAX_RTS_BYTES 2347
#define MAX_RATES 8
-#define MEGABIT 1024*1024
+#define MEGABIT (1024 * 1024)
#define HCF_FAILURE 0xFF
#define UIL_FAILURE 0xFF
-#define CFG_UIL_CONNECT 0xA123 // Define differently?
-#define CFG_UIL_CONNECT_ACK_CODE 0x5653435A // VSCZ
+#define CFG_UIL_CONNECT 0xA123 /* Define differently? */
+#define CFG_UIL_CONNECT_ACK_CODE 0x5653435A /* VSCZ */
#define WVLAN2_UIL_CONNECTED (0x01L << 0)
#define WVLAN2_UIL_BUSY (0x01L << 1)
@@ -154,15 +148,15 @@
UIL_FUN_PUT_INFO
*/
-#define SIOCSIWNETNAME SIOCDEVPRIVATE+1
-#define SIOCGIWNETNAME SIOCDEVPRIVATE+2
-#define SIOCSIWSTANAME SIOCDEVPRIVATE+3
-#define SIOCGIWSTANAME SIOCDEVPRIVATE+4
-#define SIOCSIWPORTTYPE SIOCDEVPRIVATE+5
-#define SIOCGIWPORTTYPE SIOCDEVPRIVATE+6
+#define SIOCSIWNETNAME (SIOCDEVPRIVATE + 1)
+#define SIOCGIWNETNAME (SIOCDEVPRIVATE + 2)
+#define SIOCSIWSTANAME (SIOCDEVPRIVATE + 3)
+#define SIOCGIWSTANAME (SIOCDEVPRIVATE + 4)
+#define SIOCSIWPORTTYPE (SIOCDEVPRIVATE + 5)
+#define SIOCGIWPORTTYPE (SIOCDEVPRIVATE + 6)
/* IOCTL code for the RTS interface */
-#define WL_IOCTL_RTS SIOCDEVPRIVATE+7
+#define WL_IOCTL_RTS (SIOCDEVPRIVATE + 7)
/* IOCTL subcodes for WL_IOCTL_RTS */
#define WL_IOCTL_RTS_READ 1
@@ -174,61 +168,54 @@
/*******************************************************************************
* STRUCTURE DEFINITIONS
******************************************************************************/
-typedef struct
-{
- __u16 length;
- __u8 name[HCF_MAX_NAME_LEN];
+typedef struct {
+ __u16 length;
+ __u8 name[HCF_MAX_NAME_LEN];
}
wvName_t;
-typedef struct
-{
- hcf_16 len;
- hcf_16 typ;
- union
- {
- hcf_8 u8[MAX_LTV_BUF_SIZE / sizeof(hcf_8)];
- hcf_16 u16[MAX_LTV_BUF_SIZE / sizeof(hcf_16)];
- hcf_32 u32[MAX_LTV_BUF_SIZE / sizeof(hcf_32)];
- } u;
+typedef struct {
+ hcf_16 len;
+ hcf_16 typ;
+ union {
+ hcf_8 u8[MAX_LTV_BUF_SIZE / sizeof(hcf_8)];
+ hcf_16 u16[MAX_LTV_BUF_SIZE / sizeof(hcf_16)];
+ hcf_32 u32[MAX_LTV_BUF_SIZE / sizeof(hcf_32)];
+ } u;
}
ltv_t;
-struct uilreq
-{
- union
- {
- char ifrn_name[IFNAMSIZ];
- } ifr_ifrn;
+struct uilreq {
+ union {
+ char ifrn_name[IFNAMSIZ];
+ } ifr_ifrn;
- IFBP hcfCtx;
- __u8 command;
- __u8 result;
+ IFBP hcfCtx;
+ __u8 command;
+ __u8 result;
- /* The data field in this structure is typically an LTV of some type. The
- len field is the size of the buffer in bytes, as opposed to words (like
- the L-field in the LTV */
- __u16 len;
- void *data;
+ /* The data field in this structure is typically an LTV of some type.
+ The len field is the size of the buffer in bytes, as opposed to words
+ (like the L-field in the LTV */
+ __u16 len;
+ void *data;
};
-struct rtsreq
-{
- union
- {
- char ifrn_name[IFNAMSIZ];
- }
- ifr_ifrn;
+struct rtsreq {
+ union {
+ char ifrn_name[IFNAMSIZ];
+ }
+ ifr_ifrn;
- __u16 typ;
- __u16 reg;
- __u16 len;
- __u16 *data;
+ __u16 typ;
+ __u16 reg;
+ __u16 len;
+ __u16 *data;
};
-#endif // __WAVELAN2_IF_H__
+#endif /* __WAVELAN2_IF_H__ */
diff --git a/drivers/staging/wlags49_h2/wl_pci.c b/drivers/staging/wlags49_h2/wl_pci.c
index a09c3ac..6226e5e 100644
--- a/drivers/staging/wlags49_h2/wl_pci.c
+++ b/drivers/staging/wlags49_h2/wl_pci.c
@@ -111,7 +111,7 @@
#endif // DBG
/* define the PCI device Table Cardname and id tables */
-static struct pci_device_id wl_pci_tbl[] __devinitdata = {
+static struct pci_device_id wl_pci_tbl[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_WL_LKM, PCI_DEVICE_ID_WL_LKM_0), },
{ PCI_DEVICE(PCI_VENDOR_ID_WL_LKM, PCI_DEVICE_ID_WL_LKM_1), },
{ PCI_DEVICE(PCI_VENDOR_ID_WL_LKM, PCI_DEVICE_ID_WL_LKM_2), },
@@ -124,9 +124,9 @@
/*******************************************************************************
* function prototypes
******************************************************************************/
-int __devinit wl_pci_probe( struct pci_dev *pdev,
+int wl_pci_probe( struct pci_dev *pdev,
const struct pci_device_id *ent );
-void __devexit wl_pci_remove(struct pci_dev *pdev);
+void wl_pci_remove(struct pci_dev *pdev);
int wl_pci_setup( struct pci_dev *pdev );
void wl_pci_enable_cardbus_interrupts( struct pci_dev *pdev );
@@ -160,14 +160,13 @@
/*******************************************************************************
* PCI module function registration
******************************************************************************/
-static struct pci_driver wl_driver =
-{
- name: MODULE_NAME,
- id_table: wl_pci_tbl,
- probe: wl_pci_probe,
- remove: __devexit_p(wl_pci_remove),
- suspend: NULL,
- resume: NULL,
+static struct pci_driver wl_driver = {
+ .name = MODULE_NAME,
+ .id_table = wl_pci_tbl,
+ .probe = wl_pci_probe,
+ .remove = wl_pci_remove,
+ .suspend = NULL,
+ .resume = NULL
};
/*******************************************************************************
@@ -399,7 +398,7 @@
* errno value otherwise
*
******************************************************************************/
-int __devinit wl_pci_probe( struct pci_dev *pdev,
+int wl_pci_probe( struct pci_dev *pdev,
const struct pci_device_id *ent )
{
int result;
@@ -436,7 +435,7 @@
* N/A
*
******************************************************************************/
-void __devexit wl_pci_remove(struct pci_dev *pdev)
+void wl_pci_remove(struct pci_dev *pdev)
{
struct net_device *dev = NULL;
/*------------------------------------------------------------------------*/
diff --git a/drivers/staging/wlan-ng/hfa384x_usb.c b/drivers/staging/wlan-ng/hfa384x_usb.c
index f180c3d..c1a8cb6 100644
--- a/drivers/staging/wlan-ng/hfa384x_usb.c
+++ b/drivers/staging/wlan-ng/hfa384x_usb.c
@@ -171,11 +171,11 @@
static void hfa384x_usbin_callback(struct urb *urb);
static void
-hfa384x_usbin_txcompl(wlandevice_t *wlandev, hfa384x_usbin_t * usbin);
+hfa384x_usbin_txcompl(wlandevice_t *wlandev, hfa384x_usbin_t *usbin);
static void hfa384x_usbin_rx(wlandevice_t *wlandev, struct sk_buff *skb);
-static void hfa384x_usbin_info(wlandevice_t *wlandev, hfa384x_usbin_t * usbin);
+static void hfa384x_usbin_info(wlandevice_t *wlandev, hfa384x_usbin_t *usbin);
static void
hfa384x_usbout_tx(wlandevice_t *wlandev, hfa384x_usbout_t *usbout);
@@ -285,7 +285,7 @@
return ctlx_str[s];
};
-static inline hfa384x_usbctlx_t *get_active_ctlx(hfa384x_t * hw)
+static inline hfa384x_usbctlx_t *get_active_ctlx(hfa384x_t *hw)
{
return list_entry(hw->ctlxq.active.next, hfa384x_usbctlx_t, list);
}
diff --git a/drivers/staging/xgifb/TODO b/drivers/staging/xgifb/TODO
index 13d9bc2..392b29d 100644
--- a/drivers/staging/xgifb/TODO
+++ b/drivers/staging/xgifb/TODO
@@ -1,4 +1,4 @@
-This drivers still need a lot of work. I can list all cleanups to do but it's
+This drivers still needs a lot of work. I can list all cleanups to do but it's
going to be long. So, I'm writing "cleanups" and not the list.
Arnaud
diff --git a/drivers/staging/xgifb/XGI_main_26.c b/drivers/staging/xgifb/XGI_main_26.c
index f775c54..e0f745d 100644
--- a/drivers/staging/xgifb/XGI_main_26.c
+++ b/drivers/staging/xgifb/XGI_main_26.c
@@ -73,9 +73,9 @@
RefreshRateTableIndex = XGI_GetRatePtrCRT2(HwDeviceExtension, ModeNo,
ModeIdIndex, XGI_Pr);
- ClockIndex = XGI_Pr->RefIndex[RefreshRateTableIndex].Ext_CRTVCLK;
+ ClockIndex = XGI330_RefIndex[RefreshRateTableIndex].Ext_CRTVCLK;
- Clock = XGI_Pr->VCLKData[ClockIndex].CLOCK * 1000;
+ Clock = XGI_VCLKData[ClockIndex].CLOCK * 1000;
return Clock;
}
@@ -101,35 +101,35 @@
return 0;
RefreshRateTableIndex = XGI_GetRatePtrCRT2(HwDeviceExtension, ModeNo,
ModeIdIndex, XGI_Pr);
- index = XGI_Pr->RefIndex[RefreshRateTableIndex].Ext_CRT1CRTC;
+ index = XGI330_RefIndex[RefreshRateTableIndex].Ext_CRT1CRTC;
- sr_data = XGI_Pr->XGINEWUB_CRT1Table[index].CR[5];
+ sr_data = XGI_CRT1Table[index].CR[5];
- cr_data = XGI_Pr->XGINEWUB_CRT1Table[index].CR[0];
+ cr_data = XGI_CRT1Table[index].CR[0];
/* Horizontal total */
HT = (cr_data & 0xff) | ((unsigned short) (sr_data & 0x03) << 8);
A = HT + 5;
- HDE = (XGI_Pr->RefIndex[RefreshRateTableIndex].XRes >> 3) - 1;
+ HDE = (XGI330_RefIndex[RefreshRateTableIndex].XRes >> 3) - 1;
E = HDE + 1;
- cr_data = XGI_Pr->XGINEWUB_CRT1Table[index].CR[3];
+ cr_data = XGI_CRT1Table[index].CR[3];
/* Horizontal retrace (=sync) start */
HRS = (cr_data & 0xff) | ((unsigned short) (sr_data & 0xC0) << 2);
F = HRS - E - 3;
- cr_data = XGI_Pr->XGINEWUB_CRT1Table[index].CR[1];
+ cr_data = XGI_CRT1Table[index].CR[1];
/* Horizontal blank start */
HBS = (cr_data & 0xff) | ((unsigned short) (sr_data & 0x30) << 4);
- sr_data = XGI_Pr->XGINEWUB_CRT1Table[index].CR[6];
+ sr_data = XGI_CRT1Table[index].CR[6];
- cr_data = XGI_Pr->XGINEWUB_CRT1Table[index].CR[2];
+ cr_data = XGI_CRT1Table[index].CR[2];
- cr_data2 = XGI_Pr->XGINEWUB_CRT1Table[index].CR[4];
+ cr_data2 = XGI_CRT1Table[index].CR[4];
/* Horizontal blank end */
HBE = (cr_data & 0x1f) | ((unsigned short) (cr_data2 & 0x80) >> 2)
@@ -150,11 +150,11 @@
*right_margin = F * 8;
*hsync_len = C * 8;
- sr_data = XGI_Pr->XGINEWUB_CRT1Table[index].CR[14];
+ sr_data = XGI_CRT1Table[index].CR[14];
- cr_data = XGI_Pr->XGINEWUB_CRT1Table[index].CR[8];
+ cr_data = XGI_CRT1Table[index].CR[8];
- cr_data2 = XGI_Pr->XGINEWUB_CRT1Table[index].CR[9];
+ cr_data2 = XGI_CRT1Table[index].CR[9];
/* Vertical total */
VT = (cr_data & 0xFF) | ((unsigned short) (cr_data2 & 0x01) << 8)
@@ -162,10 +162,10 @@
| ((unsigned short) (sr_data & 0x01) << 10);
A = VT + 2;
- VDE = XGI_Pr->RefIndex[RefreshRateTableIndex].YRes - 1;
+ VDE = XGI330_RefIndex[RefreshRateTableIndex].YRes - 1;
E = VDE + 1;
- cr_data = XGI_Pr->XGINEWUB_CRT1Table[index].CR[10];
+ cr_data = XGI_CRT1Table[index].CR[10];
/* Vertical retrace (=sync) start */
VRS = (cr_data & 0xff) | ((unsigned short) (cr_data2 & 0x04) << 6)
@@ -173,23 +173,23 @@
| ((unsigned short) (sr_data & 0x08) << 7);
F = VRS + 1 - E;
- cr_data = XGI_Pr->XGINEWUB_CRT1Table[index].CR[12];
+ cr_data = XGI_CRT1Table[index].CR[12];
- cr_data3 = (XGI_Pr->XGINEWUB_CRT1Table[index].CR[14] & 0x80) << 5;
+ cr_data3 = (XGI_CRT1Table[index].CR[14] & 0x80) << 5;
/* Vertical blank start */
VBS = (cr_data & 0xff) | ((unsigned short) (cr_data2 & 0x08) << 5)
| ((unsigned short) (cr_data3 & 0x20) << 4)
| ((unsigned short) (sr_data & 0x04) << 8);
- cr_data = XGI_Pr->XGINEWUB_CRT1Table[index].CR[13];
+ cr_data = XGI_CRT1Table[index].CR[13];
/* Vertical blank end */
VBE = (cr_data & 0xff) | ((unsigned short) (sr_data & 0x10) << 4);
temp = VBE - ((E - 1) & 511);
B = (temp > 0) ? temp : (temp + 512);
- cr_data = XGI_Pr->XGINEWUB_CRT1Table[index].CR[11];
+ cr_data = XGI_CRT1Table[index].CR[11];
/* Vertical retrace (=sync) end */
VRE = (cr_data & 0x0f) | ((sr_data & 0x20) >> 1);
@@ -202,25 +202,25 @@
*lower_margin = F;
*vsync_len = C;
- if (XGI_Pr->RefIndex[RefreshRateTableIndex].Ext_InfoFlag & 0x8000)
+ if (XGI330_RefIndex[RefreshRateTableIndex].Ext_InfoFlag & 0x8000)
*sync &= ~FB_SYNC_VERT_HIGH_ACT;
else
*sync |= FB_SYNC_VERT_HIGH_ACT;
- if (XGI_Pr->RefIndex[RefreshRateTableIndex].Ext_InfoFlag & 0x4000)
+ if (XGI330_RefIndex[RefreshRateTableIndex].Ext_InfoFlag & 0x4000)
*sync &= ~FB_SYNC_HOR_HIGH_ACT;
else
*sync |= FB_SYNC_HOR_HIGH_ACT;
*vmode = FB_VMODE_NONINTERLACED;
- if (XGI_Pr->RefIndex[RefreshRateTableIndex].Ext_InfoFlag & 0x0080)
+ if (XGI330_RefIndex[RefreshRateTableIndex].Ext_InfoFlag & 0x0080)
*vmode = FB_VMODE_INTERLACED;
else {
j = 0;
- while (XGI_Pr->EModeIDTable[j].Ext_ModeID != 0xff) {
- if (XGI_Pr->EModeIDTable[j].Ext_ModeID ==
- XGI_Pr->RefIndex[RefreshRateTableIndex].ModeID) {
- if (XGI_Pr->EModeIDTable[j].Ext_ModeFlag &
+ while (XGI330_EModeIDTable[j].Ext_ModeID != 0xff) {
+ if (XGI330_EModeIDTable[j].Ext_ModeID ==
+ XGI330_RefIndex[RefreshRateTableIndex].ModeID) {
+ if (XGI330_EModeIDTable[j].Ext_ModeFlag &
DoubleScanMode) {
*vmode = FB_VMODE_DOUBLE;
}
@@ -1695,7 +1695,7 @@
return 0;
}
-static int __devinit xgifb_probe(struct pci_dev *pdev,
+static int xgifb_probe(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
u8 reg, reg1;
@@ -2103,7 +2103,7 @@
/* PCI DEVICE HANDLING */
/*****************************************************/
-static void __devexit xgifb_remove(struct pci_dev *pdev)
+static void xgifb_remove(struct pci_dev *pdev)
{
struct xgifb_video_info *xgifb_info = pci_get_drvdata(pdev);
struct fb_info *fb_info = xgifb_info->fb_info;
@@ -2127,7 +2127,7 @@
.name = "xgifb",
.id_table = xgifb_pci_table,
.probe = xgifb_probe,
- .remove = __devexit_p(xgifb_remove)
+ .remove = xgifb_remove
};
diff --git a/drivers/staging/xgifb/vb_def.h b/drivers/staging/xgifb/vb_def.h
index 77137e4..148f637 100644
--- a/drivers/staging/xgifb/vb_def.h
+++ b/drivers/staging/xgifb/vb_def.h
@@ -254,9 +254,16 @@
#define XGI330_SR1F 0
#define XGI330_SR23 0xf6
#define XGI330_SR24 0x0d
-#define XGI330_SR25 0
#define XGI330_SR31 0xc0
#define XGI330_SR32 0x11
#define XGI330_SR33 0
+extern const struct XGI_ExtStruct XGI330_EModeIDTable[];
+extern const struct XGI_Ext2Struct XGI330_RefIndex[];
+extern const struct XGI_CRT1TableStruct XGI_CRT1Table[];
+extern const struct XGI_ECLKDataStruct XGI340_ECLKData[];
+extern const struct SiS_VCLKData XGI_VCLKData[];
+extern const unsigned char XGI340_CR6B[][4];
+extern const unsigned char XGI340_AGPReg[];
+
#endif
diff --git a/drivers/staging/xgifb/vb_init.c b/drivers/staging/xgifb/vb_init.c
index 7739dbd..2b791c1 100644
--- a/drivers/staging/xgifb/vb_init.c
+++ b/drivers/staging/xgifb/vb_init.c
@@ -94,8 +94,8 @@
0x18,
pVBInfo->SR15[2][pVBInfo->ram_type]); /* SR18 */
xgifb_reg_set(P3c4, 0x19, 0x01);
- xgifb_reg_set(P3c4, 0x16, pVBInfo->SR16[0]);
- xgifb_reg_set(P3c4, 0x16, pVBInfo->SR16[1]);
+ xgifb_reg_set(P3c4, 0x16, 0x03);
+ xgifb_reg_set(P3c4, 0x16, 0x83);
mdelay(1);
xgifb_reg_set(P3c4, 0x1B, 0x03);
udelay(500);
@@ -103,8 +103,8 @@
0x18,
pVBInfo->SR15[2][pVBInfo->ram_type]); /* SR18 */
xgifb_reg_set(P3c4, 0x19, 0x00);
- xgifb_reg_set(P3c4, 0x16, pVBInfo->SR16[2]);
- xgifb_reg_set(P3c4, 0x16, pVBInfo->SR16[3]);
+ xgifb_reg_set(P3c4, 0x16, 0x03);
+ xgifb_reg_set(P3c4, 0x16, 0x83);
xgifb_reg_set(P3c4, 0x1B, 0x00);
}
@@ -124,13 +124,13 @@
xgifb_reg_set(pVBInfo->P3c4,
0x2E,
- pVBInfo->ECLKData[pVBInfo->ram_type].SR2E);
+ XGI340_ECLKData[pVBInfo->ram_type].SR2E);
xgifb_reg_set(pVBInfo->P3c4,
0x2F,
- pVBInfo->ECLKData[pVBInfo->ram_type].SR2F);
+ XGI340_ECLKData[pVBInfo->ram_type].SR2F);
xgifb_reg_set(pVBInfo->P3c4,
0x30,
- pVBInfo->ECLKData[pVBInfo->ram_type].SR30);
+ XGI340_ECLKData[pVBInfo->ram_type].SR30);
/* When XG42 ECLK = MCLK = 207MHz, Set SR32 D[1:0] = 10b */
/* Modify SR32 value, when MCLK=207MHZ, ELCK=250MHz,
@@ -138,10 +138,10 @@
if (HwDeviceExtension->jChipType == XG42) {
if ((pVBInfo->MCLKData[pVBInfo->ram_type].SR28 == 0x1C) &&
(pVBInfo->MCLKData[pVBInfo->ram_type].SR29 == 0x01) &&
- (((pVBInfo->ECLKData[pVBInfo->ram_type].SR2E == 0x1C) &&
- (pVBInfo->ECLKData[pVBInfo->ram_type].SR2F == 0x01)) ||
- ((pVBInfo->ECLKData[pVBInfo->ram_type].SR2E == 0x22) &&
- (pVBInfo->ECLKData[pVBInfo->ram_type].SR2F == 0x01))))
+ (((XGI340_ECLKData[pVBInfo->ram_type].SR2E == 0x1C) &&
+ (XGI340_ECLKData[pVBInfo->ram_type].SR2F == 0x01)) ||
+ ((XGI340_ECLKData[pVBInfo->ram_type].SR2E == 0x22) &&
+ (XGI340_ECLKData[pVBInfo->ram_type].SR2F == 0x01))))
xgifb_reg_set(pVBInfo->P3c4,
0x32,
((unsigned char) xgifb_reg_get(
@@ -429,7 +429,7 @@
temp2 = 0;
for (i = 0; i < 4; i++) {
/* CR6B DQS fine tune delay */
- temp = pVBInfo->CR6B[pVBInfo->ram_type][i];
+ temp = XGI340_CR6B[pVBInfo->ram_type][i];
for (j = 0; j < 4; j++) {
temp1 = ((temp >> (2 * j)) & 0x03) << 2;
temp2 |= temp1;
@@ -444,7 +444,7 @@
temp2 = 0;
for (i = 0; i < 4; i++) {
/* CR6E DQM fine tune delay */
- temp = pVBInfo->CR6E[pVBInfo->ram_type][i];
+ temp = 0;
for (j = 0; j < 4; j++) {
temp1 = ((temp >> (2 * j)) & 0x03) << 2;
temp2 |= temp1;
@@ -463,7 +463,7 @@
temp2 = 0;
for (i = 0; i < 8; i++) {
/* CR6F DQ fine tune delay */
- temp = pVBInfo->CR6F[pVBInfo->ram_type][8 * k + i];
+ temp = 0;
for (j = 0; j < 4; j++) {
temp1 = (temp >> (2 * j)) & 0x03;
temp2 |= temp1;
@@ -486,7 +486,7 @@
temp2 = 0x80;
/* CR89 terminator type select */
- temp = pVBInfo->CR89[pVBInfo->ram_type][0];
+ temp = 0;
for (j = 0; j < 4; j++) {
temp1 = (temp >> (2 * j)) & 0x03;
temp2 |= temp1;
@@ -496,7 +496,7 @@
temp2 += 0x10;
}
- temp = pVBInfo->CR89[pVBInfo->ram_type][1];
+ temp = 0;
temp1 = temp & 0x03;
temp2 |= temp1;
xgifb_reg_set(P3d4, 0x89, temp2);
@@ -1378,17 +1378,17 @@
for (i = 0x47; i <= 0x4C; i++)
xgifb_reg_set(pVBInfo->P3d4,
i,
- pVBInfo->AGPReg[i - 0x47]);
+ XGI340_AGPReg[i - 0x47]);
for (i = 0x70; i <= 0x71; i++)
xgifb_reg_set(pVBInfo->P3d4,
i,
- pVBInfo->AGPReg[6 + i - 0x70]);
+ XGI340_AGPReg[6 + i - 0x70]);
for (i = 0x74; i <= 0x77; i++)
xgifb_reg_set(pVBInfo->P3d4,
i,
- pVBInfo->AGPReg[8 + i - 0x74]);
+ XGI340_AGPReg[8 + i - 0x74]);
pci_read_config_dword(pdev, 0x50, &Temp);
Temp >>= 20;
@@ -1401,7 +1401,7 @@
/* Set PCI */
xgifb_reg_set(pVBInfo->P3c4, 0x23, XGI330_SR23);
xgifb_reg_set(pVBInfo->P3c4, 0x24, XGI330_SR24);
- xgifb_reg_set(pVBInfo->P3c4, 0x25, XGI330_SR25);
+ xgifb_reg_set(pVBInfo->P3c4, 0x25, 0);
if (HwDeviceExtension->jChipType < XG20) {
/* Set VB */
@@ -1482,11 +1482,8 @@
XGINew_SetDRAMSize_340(xgifb_info, HwDeviceExtension, pVBInfo);
- xgifb_reg_set(pVBInfo->P3c4,
- 0x22,
- (unsigned char) ((pVBInfo->SR22) & 0xFE));
-
- xgifb_reg_set(pVBInfo->P3c4, 0x21, pVBInfo->SR21);
+ xgifb_reg_set(pVBInfo->P3c4, 0x22, 0xfa);
+ xgifb_reg_set(pVBInfo->P3c4, 0x21, 0xa3);
XGINew_ChkSenseStatus(HwDeviceExtension, pVBInfo);
XGINew_SetModeScratch(HwDeviceExtension, pVBInfo);
diff --git a/drivers/staging/xgifb/vb_init.h b/drivers/staging/xgifb/vb_init.h
index a27b4fe..d548983 100644
--- a/drivers/staging/xgifb/vb_init.h
+++ b/drivers/staging/xgifb/vb_init.h
@@ -1,6 +1,5 @@
#ifndef _VBINIT_
#define _VBINIT_
extern unsigned char XGIInitNew(struct pci_dev *pdev);
-extern struct XGI21_LVDSCapStruct XGI21_LCDCapList[13];
#endif
diff --git a/drivers/staging/xgifb/vb_setmode.c b/drivers/staging/xgifb/vb_setmode.c
index e95a165..d723a25 100644
--- a/drivers/staging/xgifb/vb_setmode.c
+++ b/drivers/staging/xgifb/vb_setmode.c
@@ -23,18 +23,7 @@
void InitTo330Pointer(unsigned char ChipType, struct vb_device_info *pVBInfo)
{
- pVBInfo->StandTable = &XGI330_StandTable;
- pVBInfo->EModeIDTable = XGI330_EModeIDTable;
- pVBInfo->RefIndex = XGI330_RefIndex;
- pVBInfo->XGINEWUB_CRT1Table = XGI_CRT1Table;
-
pVBInfo->MCLKData = XGI340New_MCLKData;
- pVBInfo->ECLKData = XGI340_ECLKData;
- pVBInfo->VCLKData = XGI_VCLKData;
- pVBInfo->VBVCLKData = XGI_VBVCLKData;
- pVBInfo->ScreenOffset = XGI330_ScreenOffset;
- pVBInfo->StResInfo = XGI330_StResInfo;
- pVBInfo->ModeResInfo = XGI330_ModeResInfo;
pVBInfo->LCDResInfo = 0;
pVBInfo->LCDTypeInfo = 0;
@@ -44,19 +33,6 @@
pVBInfo->SR15 = XGI340_SR13;
pVBInfo->CR40 = XGI340_cr41;
- pVBInfo->CR6B = XGI340_CR6B;
- pVBInfo->CR6E = XGI340_CR6E;
- pVBInfo->CR6F = XGI340_CR6F;
- pVBInfo->CR89 = XGI340_CR89;
- pVBInfo->AGPReg = XGI340_AGPReg;
- pVBInfo->SR16 = XGI340_SR16;
-
- pVBInfo->SR21 = 0xa3;
- pVBInfo->SR22 = 0xfb;
-
- pVBInfo->TimingH = XGI_TimingH;
- pVBInfo->TimingV = XGI_TimingV;
- pVBInfo->UpdateCRT1 = XGI_UpdateCRT1Table;
/* 310 customization related */
if ((pVBInfo->VBType & VB_SIS301LV) || (pVBInfo->VBType & VB_SIS302LV))
@@ -90,10 +66,10 @@
unsigned char tempah, SRdata;
unsigned short i, modeflag;
- modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
+ modeflag = XGI330_EModeIDTable[ModeIdIndex].Ext_ModeFlag;
xgifb_reg_set(pVBInfo->P3c4, 0x00, 0x03); /* Set SR0 */
- tempah = pVBInfo->StandTable->SR[0];
+ tempah = XGI330_StandTable.SR[0];
i = XGI_SetCRT2ToLCDA;
if (pVBInfo->VBInfo & XGI_SetCRT2ToLCDA) {
@@ -108,7 +84,7 @@
for (i = 02; i <= 04; i++) {
/* Get SR2,3,4 from file */
- SRdata = pVBInfo->StandTable->SR[i - 1];
+ SRdata = XGI330_StandTable.SR[i - 1];
xgifb_reg_set(pVBInfo->P3c4, i, SRdata); /* Set SR2 3 4 */
}
}
@@ -125,7 +101,7 @@
for (i = 0; i <= 0x18; i++) {
/* Get CRTC from file */
- CRTCdata = pVBInfo->StandTable->CRTC[i];
+ CRTCdata = XGI330_StandTable.CRTC[i];
xgifb_reg_set(pVBInfo->P3d4, i, CRTCdata); /* Set CRTC(3d4) */
}
}
@@ -137,10 +113,10 @@
unsigned char ARdata;
unsigned short i, modeflag;
- modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
+ modeflag = XGI330_EModeIDTable[ModeIdIndex].Ext_ModeFlag;
for (i = 0; i <= 0x13; i++) {
- ARdata = pVBInfo->StandTable->ATTR[i];
+ ARdata = XGI330_StandTable.ATTR[i];
if ((modeflag & Charx8Dot) && i == 0x13) { /* ifndef Dot9 */
if (pVBInfo->VBInfo & XGI_SetCRT2ToLCDA) {
@@ -171,7 +147,7 @@
for (i = 0; i <= 0x08; i++) {
/* Get GR from file */
- GRdata = pVBInfo->StandTable->GRC[i];
+ GRdata = XGI330_StandTable.GRC[i];
xgifb_reg_set(pVBInfo->P3ce, i, GRdata); /* Set GR(3ce) */
}
@@ -194,12 +170,12 @@
{
xgifb_reg_and_or(pVBInfo->P3c4, 0x31, ~0x30, 0x20);
- xgifb_reg_set(pVBInfo->P3c4, 0x2B, pVBInfo->VCLKData[0].SR2B);
- xgifb_reg_set(pVBInfo->P3c4, 0x2C, pVBInfo->VCLKData[0].SR2C);
+ xgifb_reg_set(pVBInfo->P3c4, 0x2B, XGI_VCLKData[0].SR2B);
+ xgifb_reg_set(pVBInfo->P3c4, 0x2C, XGI_VCLKData[0].SR2C);
xgifb_reg_and_or(pVBInfo->P3c4, 0x31, ~0x30, 0x10);
- xgifb_reg_set(pVBInfo->P3c4, 0x2B, pVBInfo->VCLKData[1].SR2B);
- xgifb_reg_set(pVBInfo->P3c4, 0x2C, pVBInfo->VCLKData[1].SR2C);
+ xgifb_reg_set(pVBInfo->P3c4, 0x2B, XGI_VCLKData[1].SR2B);
+ xgifb_reg_set(pVBInfo->P3c4, 0x2C, XGI_VCLKData[1].SR2C);
xgifb_reg_and(pVBInfo->P3c4, 0x31, ~0x30);
return 0;
@@ -212,9 +188,9 @@
{
unsigned short tempax, tempbx, resinfo, modeflag, infoflag;
- modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
- resinfo = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO;
- tempbx = pVBInfo->RefIndex[RefreshRateTableIndex + (*i)].ModeID;
+ modeflag = XGI330_EModeIDTable[ModeIdIndex].Ext_ModeFlag;
+ resinfo = XGI330_EModeIDTable[ModeIdIndex].Ext_RESINFO;
+ tempbx = XGI330_RefIndex[RefreshRateTableIndex + (*i)].ModeID;
tempax = 0;
if (pVBInfo->IF_DEF_LVDS == 0) {
@@ -279,9 +255,9 @@
}
}
- for (; pVBInfo->RefIndex[RefreshRateTableIndex + (*i)].ModeID ==
+ for (; XGI330_RefIndex[RefreshRateTableIndex + (*i)].ModeID ==
tempbx; (*i)--) {
- infoflag = pVBInfo->RefIndex[RefreshRateTableIndex + (*i)].
+ infoflag = XGI330_RefIndex[RefreshRateTableIndex + (*i)].
Ext_InfoFlag;
if (infoflag & tempax)
return 1;
@@ -291,9 +267,9 @@
}
for ((*i) = 0;; (*i)++) {
- infoflag = pVBInfo->RefIndex[RefreshRateTableIndex + (*i)].
+ infoflag = XGI330_RefIndex[RefreshRateTableIndex + (*i)].
Ext_InfoFlag;
- if (pVBInfo->RefIndex[RefreshRateTableIndex + (*i)].ModeID
+ if (XGI330_RefIndex[RefreshRateTableIndex + (*i)].ModeID
!= tempbx) {
return 0;
}
@@ -310,7 +286,7 @@
unsigned short sync, temp;
/* di+0x00 */
- sync = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_InfoFlag >> 8;
+ sync = XGI330_RefIndex[RefreshRateTableIndex].Ext_InfoFlag >> 8;
sync &= 0xC0;
temp = 0x2F;
temp |= sync;
@@ -328,22 +304,22 @@
data &= 0x7F;
xgifb_reg_set(pVBInfo->P3d4, 0x11, data);
- data = pVBInfo->TimingH[0].data[0];
+ data = pVBInfo->TimingH.data[0];
xgifb_reg_set(pVBInfo->P3d4, 0, data);
for (i = 0x01; i <= 0x04; i++) {
- data = pVBInfo->TimingH[0].data[i];
+ data = pVBInfo->TimingH.data[i];
xgifb_reg_set(pVBInfo->P3d4, (unsigned short) (i + 1), data);
}
for (i = 0x05; i <= 0x06; i++) {
- data = pVBInfo->TimingH[0].data[i];
+ data = pVBInfo->TimingH.data[i];
xgifb_reg_set(pVBInfo->P3c4, (unsigned short) (i + 6), data);
}
j = (unsigned char) xgifb_reg_get(pVBInfo->P3c4, 0x0e);
j &= 0x1F;
- data = pVBInfo->TimingH[0].data[7];
+ data = pVBInfo->TimingH.data[7];
data &= 0xE0;
data |= j;
xgifb_reg_set(pVBInfo->P3c4, 0x0e, data);
@@ -385,32 +361,32 @@
unsigned short i, j;
for (i = 0x00; i <= 0x01; i++) {
- data = pVBInfo->TimingV[0].data[i];
+ data = pVBInfo->TimingV.data[i];
xgifb_reg_set(pVBInfo->P3d4, (unsigned short) (i + 6), data);
}
for (i = 0x02; i <= 0x03; i++) {
- data = pVBInfo->TimingV[0].data[i];
+ data = pVBInfo->TimingV.data[i];
xgifb_reg_set(pVBInfo->P3d4, (unsigned short) (i + 0x0e), data);
}
for (i = 0x04; i <= 0x05; i++) {
- data = pVBInfo->TimingV[0].data[i];
+ data = pVBInfo->TimingV.data[i];
xgifb_reg_set(pVBInfo->P3d4, (unsigned short) (i + 0x11), data);
}
j = (unsigned char) xgifb_reg_get(pVBInfo->P3c4, 0x0a);
j &= 0xC0;
- data = pVBInfo->TimingV[0].data[6];
+ data = pVBInfo->TimingV.data[6];
data &= 0x3F;
data |= j;
xgifb_reg_set(pVBInfo->P3c4, 0x0a, data);
- data = pVBInfo->TimingV[0].data[6];
+ data = pVBInfo->TimingV.data[6];
data &= 0x80;
data = data >> 2;
- i = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
+ i = XGI330_EModeIDTable[ModeIdIndex].Ext_ModeFlag;
i &= DoubleScanMode;
if (i)
data |= 0x80;
@@ -430,7 +406,7 @@
unsigned short i;
/* Get index */
- index = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_CRT1CRTC;
+ index = XGI330_RefIndex[RefreshRateTableIndex].Ext_CRT1CRTC;
index = index & IndexMask;
data = (unsigned char) xgifb_reg_get(pVBInfo->P3d4, 0x11);
@@ -438,12 +414,12 @@
xgifb_reg_set(pVBInfo->P3d4, 0x11, data); /* Unlock CRTC */
for (i = 0; i < 8; i++)
- pVBInfo->TimingH[0].data[i]
- = pVBInfo->XGINEWUB_CRT1Table[index].CR[i];
+ pVBInfo->TimingH.data[i]
+ = XGI_CRT1Table[index].CR[i];
for (i = 0; i < 7; i++)
- pVBInfo->TimingV[0].data[i]
- = pVBInfo->XGINEWUB_CRT1Table[index].CR[i + 8];
+ pVBInfo->TimingV.data[i]
+ = XGI_CRT1Table[index].CR[i + 8];
XGI_SetCRT1Timing_H(pVBInfo, HwDeviceExtension);
@@ -466,23 +442,23 @@
unsigned char index, Tempax, Tempbx, Tempcx, Tempdx;
unsigned short Temp1, Temp2, Temp3;
- index = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_CRT1CRTC;
+ index = XGI330_RefIndex[RefreshRateTableIndex].Ext_CRT1CRTC;
/* Tempax: CR4 HRS */
- Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[3];
+ Tempax = XGI_CRT1Table[index].CR[3];
Tempcx = Tempax; /* Tempcx: HRS */
/* SR2E[7:0]->HRS */
xgifb_reg_set(pVBInfo->P3c4, 0x2E, Tempax);
- Tempdx = pVBInfo->XGINEWUB_CRT1Table[index].CR[5]; /* SRB */
+ Tempdx = XGI_CRT1Table[index].CR[5]; /* SRB */
Tempdx &= 0xC0; /* Tempdx[7:6]: SRB[7:6] */
Temp1 = Tempdx; /* Temp1[7:6]: HRS[9:8] */
Temp1 <<= 2; /* Temp1[9:8]: HRS[9:8] */
Temp1 |= Tempax; /* Temp1[9:0]: HRS[9:0] */
- Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[4]; /* CR5 HRE */
+ Tempax = XGI_CRT1Table[index].CR[4]; /* CR5 HRE */
Tempax &= 0x1F; /* Tempax[4:0]: HRE[4:0] */
- Tempbx = pVBInfo->XGINEWUB_CRT1Table[index].CR[6]; /* SRC */
+ Tempbx = XGI_CRT1Table[index].CR[6]; /* SRC */
Tempbx &= 0x04; /* Tempbx[2]: HRE[5] */
Tempbx <<= 3; /* Tempbx[5]: HRE[5] */
Tempax |= Tempbx; /* Tempax[5:0]: HRE[5:0] */
@@ -504,12 +480,12 @@
xgifb_reg_and_or(pVBInfo->P3c4, 0x30, 0xE3, 00);
/* CR10 VRS */
- Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[10];
+ Tempax = XGI_CRT1Table[index].CR[10];
Tempbx = Tempax; /* Tempbx: VRS */
Tempax &= 0x01; /* Tempax[0]: VRS[0] */
xgifb_reg_or(pVBInfo->P3c4, 0x33, Tempax); /* SR33[0]->VRS[0] */
/* CR7[2][7] VRE */
- Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[9];
+ Tempax = XGI_CRT1Table[index].CR[9];
Tempcx = Tempbx >> 1; /* Tempcx[6:0]: VRS[7:1] */
Tempdx = Tempax & 0x04; /* Tempdx[2]: CR7[2] */
Tempdx <<= 5; /* Tempdx[7]: VRS[8] */
@@ -523,17 +499,17 @@
Temp2 = Tempax << 2; /* Temp2[9]: VRS[9] */
Temp1 |= Temp2; /* Temp1[9:0]: VRS[9:0] */
/* Tempax: SRA */
- Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[14];
+ Tempax = XGI_CRT1Table[index].CR[14];
Tempax &= 0x08; /* Tempax[3]: VRS[3] */
Temp2 = Tempax;
Temp2 <<= 7; /* Temp2[10]: VRS[10] */
Temp1 |= Temp2; /* Temp1[10:0]: VRS[10:0] */
/* Tempax: CR11 VRE */
- Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[11];
+ Tempax = XGI_CRT1Table[index].CR[11];
Tempax &= 0x0F; /* Tempax[3:0]: VRE[3:0] */
/* Tempbx: SRA */
- Tempbx = pVBInfo->XGINEWUB_CRT1Table[index].CR[14];
+ Tempbx = XGI_CRT1Table[index].CR[14];
Tempbx &= 0x20; /* Tempbx[5]: VRE[5] */
Tempbx >>= 1; /* Tempbx[4]: VRE[4] */
Tempax |= Tempbx; /* Tempax[4:0]: VRE[4:0] */
@@ -563,23 +539,23 @@
{
unsigned short index, Tempax, Tempbx, Tempcx;
- index = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_CRT1CRTC;
+ index = XGI330_RefIndex[RefreshRateTableIndex].Ext_CRT1CRTC;
/* Tempax: CR4 HRS */
- Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[3];
+ Tempax = XGI_CRT1Table[index].CR[3];
Tempbx = Tempax; /* Tempbx: HRS[7:0] */
/* SR2E[7:0]->HRS */
xgifb_reg_set(pVBInfo->P3c4, 0x2E, Tempax);
/* SR0B */
- Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[5];
+ Tempax = XGI_CRT1Table[index].CR[5];
Tempax &= 0xC0; /* Tempax[7:6]: SR0B[7:6]: HRS[9:8]*/
Tempbx |= (Tempax << 2); /* Tempbx: HRS[9:0] */
- Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[4]; /* CR5 HRE */
+ Tempax = XGI_CRT1Table[index].CR[4]; /* CR5 HRE */
Tempax &= 0x1F; /* Tempax[4:0]: HRE[4:0] */
Tempcx = Tempax; /* Tempcx: HRE[4:0] */
- Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[6]; /* SRC */
+ Tempax = XGI_CRT1Table[index].CR[6]; /* SRC */
Tempax &= 0x04; /* Tempax[2]: HRE[5] */
Tempax <<= 3; /* Tempax[5]: HRE[5] */
Tempcx |= Tempax; /* Tempcx[5:0]: HRE[5:0] */
@@ -588,12 +564,12 @@
Tempbx |= Tempcx; /* Tempbx: HRS[9:6]HRE[5:0] */
/* Tempax: CR4 HRS */
- Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[3];
+ Tempax = XGI_CRT1Table[index].CR[3];
Tempax &= 0x3F; /* Tempax: HRS[5:0] */
if (Tempcx <= Tempax) /* HRE[5:0] < HRS[5:0] */
Tempbx += 0x40; /* Tempbx= Tempbx + 0x40 : HRE[9:0]*/
- Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[5]; /* SR0B */
+ Tempax = XGI_CRT1Table[index].CR[5]; /* SR0B */
Tempax &= 0xC0; /* Tempax[7:6]: SR0B[7:6]: HRS[9:8]*/
Tempax >>= 6; /* Tempax[1:0]: HRS[9:8]*/
Tempax |= ((Tempbx << 2) & 0xFF); /* Tempax[7:2]: HRE[5:0] */
@@ -602,13 +578,13 @@
xgifb_reg_and_or(pVBInfo->P3c4, 0x30, 0xE3, 00);
/* CR10 VRS */
- Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[10];
+ Tempax = XGI_CRT1Table[index].CR[10];
/* SR34[7:0]->VRS[7:0] */
xgifb_reg_set(pVBInfo->P3c4, 0x34, Tempax);
Tempcx = Tempax; /* Tempcx <= VRS[7:0] */
/* CR7[7][2] VRS[9][8] */
- Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[9];
+ Tempax = XGI_CRT1Table[index].CR[9];
Tempbx = Tempax; /* Tempbx <= CR07[7:0] */
Tempax = Tempax & 0x04; /* Tempax[2]: CR7[2]: VRS[8] */
Tempax >>= 2; /* Tempax[0]: VRS[8] */
@@ -617,15 +593,15 @@
Tempcx |= (Tempax << 8); /* Tempcx <= VRS[8:0] */
Tempcx |= ((Tempbx & 0x80) << 2); /* Tempcx <= VRS[9:0] */
/* Tempax: SR0A */
- Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[14];
+ Tempax = XGI_CRT1Table[index].CR[14];
Tempax &= 0x08; /* SR0A[3] VRS[10] */
Tempcx |= (Tempax << 7); /* Tempcx <= VRS[10:0] */
/* Tempax: CR11 VRE */
- Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[11];
+ Tempax = XGI_CRT1Table[index].CR[11];
Tempax &= 0x0F; /* Tempax[3:0]: VRE[3:0] */
/* Tempbx: SR0A */
- Tempbx = pVBInfo->XGINEWUB_CRT1Table[index].CR[14];
+ Tempbx = XGI_CRT1Table[index].CR[14];
Tempbx &= 0x20; /* Tempbx[5]: SR0A[5]: VRE[4] */
Tempbx >>= 1; /* Tempbx[4]: VRE[4] */
Tempax |= Tempbx; /* Tempax[4:0]: VRE[4:0] */
@@ -698,7 +674,7 @@
xgifb_reg_and(pVBInfo->P3c4, 0x30, ~0x20); /* Hsync polarity */
xgifb_reg_and(pVBInfo->P3c4, 0x35, ~0x80); /* Vsync polarity */
- Data = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_InfoFlag;
+ Data = XGI330_RefIndex[RefreshRateTableIndex].Ext_InfoFlag;
if (Data & 0x4000)
/* Hsync polarity */
xgifb_reg_or(pVBInfo->P3c4, 0x30, 0x20);
@@ -721,10 +697,10 @@
xgifb_reg_and(pVBInfo->P3d4, 0x11, 0x7F); /* Unlock CR0~7 */
if (ModeNo == 0x2E &&
- (pVBInfo->RefIndex[RefreshRateTableIndex].Ext_CRT1CRTC ==
+ (XGI330_RefIndex[RefreshRateTableIndex].Ext_CRT1CRTC ==
RES640x480x60))
index = 12;
- else if (ModeNo == 0x2E && (pVBInfo->RefIndex[RefreshRateTableIndex].
+ else if (ModeNo == 0x2E && (XGI330_RefIndex[RefreshRateTableIndex].
Ext_CRT1CRTC == RES640x480x72))
index = 13;
else if (ModeNo == 0x2F)
@@ -736,13 +712,13 @@
if (index != -1) {
xgifb_reg_set(pVBInfo->P3d4, 0x02,
- pVBInfo->UpdateCRT1[index].CR02);
+ XGI_UpdateCRT1Table[index].CR02);
xgifb_reg_set(pVBInfo->P3d4, 0x03,
- pVBInfo->UpdateCRT1[index].CR03);
+ XGI_UpdateCRT1Table[index].CR03);
xgifb_reg_set(pVBInfo->P3d4, 0x15,
- pVBInfo->UpdateCRT1[index].CR15);
+ XGI_UpdateCRT1Table[index].CR15);
xgifb_reg_set(pVBInfo->P3d4, 0x16,
- pVBInfo->UpdateCRT1[index].CR16);
+ XGI_UpdateCRT1Table[index].CR16);
}
}
@@ -755,11 +731,11 @@
unsigned char data;
- resindex = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO;
+ resindex = XGI330_EModeIDTable[ModeIdIndex].Ext_RESINFO;
- modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
- tempax = pVBInfo->ModeResInfo[resindex].HTotal;
- tempbx = pVBInfo->ModeResInfo[resindex].VTotal;
+ modeflag = XGI330_EModeIDTable[ModeIdIndex].Ext_ModeFlag;
+ tempax = XGI330_ModeResInfo[resindex].HTotal;
+ tempbx = XGI330_ModeResInfo[resindex].VTotal;
if (modeflag & HalfDCLK)
tempax = tempax >> 1;
@@ -767,7 +743,7 @@
if (modeflag & HalfDCLK)
tempax = tempax << 1;
- temp = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_InfoFlag;
+ temp = XGI330_RefIndex[RefreshRateTableIndex].Ext_InfoFlag;
if (temp & InterlaceMode)
tempbx = tempbx >> 1;
@@ -819,11 +795,11 @@
unsigned short temp, ah, al, temp2, i, DisplayUnit;
/* GetOffset */
- temp = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeInfo;
+ temp = XGI330_EModeIDTable[ModeIdIndex].Ext_ModeInfo;
temp = temp >> 8;
- temp = pVBInfo->ScreenOffset[temp];
+ temp = XGI330_ScreenOffset[temp];
- temp2 = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_InfoFlag;
+ temp2 = XGI330_RefIndex[RefreshRateTableIndex].Ext_InfoFlag;
temp2 &= InterlaceMode;
if (temp2)
@@ -874,7 +850,7 @@
xgifb_reg_set(pVBInfo->P3d4, 0x13, temp);
/* SetDisplayUnit */
- temp2 = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_InfoFlag;
+ temp2 = XGI330_RefIndex[RefreshRateTableIndex].Ext_InfoFlag;
temp2 &= InterlaceMode;
if (temp2)
DisplayUnit >>= 1;
@@ -904,9 +880,9 @@
unsigned short modeflag, resinfo;
/* si+Ext_ResInfo */
- modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
- resinfo = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO;
- CRT2Index = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_CRT2CRTC;
+ modeflag = XGI330_EModeIDTable[ModeIdIndex].Ext_ModeFlag;
+ resinfo = XGI330_EModeIDTable[ModeIdIndex].Ext_RESINFO;
+ CRT2Index = XGI330_RefIndex[RefreshRateTableIndex].Ext_CRT2CRTC;
if (pVBInfo->IF_DEF_LVDS == 0) {
CRT2Index = CRT2Index >> 6; /* for LCD */
@@ -947,7 +923,7 @@
VCLKIndex = TVCLKBASE_315_25 + TVVCLK;
} else { /* for CRT2 */
/* di+Ext_CRTVCLK */
- VCLKIndex = pVBInfo->RefIndex[RefreshRateTableIndex].
+ VCLKIndex = XGI330_RefIndex[RefreshRateTableIndex].
Ext_CRTVCLK;
VCLKIndex &= IndexMask;
}
@@ -971,13 +947,11 @@
unsigned short vclkindex;
if (pVBInfo->IF_DEF_LVDS == 1) {
- index = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_CRTVCLK;
+ index = XGI330_RefIndex[RefreshRateTableIndex].Ext_CRTVCLK;
data = xgifb_reg_get(pVBInfo->P3c4, 0x31) & 0xCF;
xgifb_reg_set(pVBInfo->P3c4, 0x31, data);
- xgifb_reg_set(pVBInfo->P3c4, 0x2B,
- pVBInfo->VCLKData[index].SR2B);
- xgifb_reg_set(pVBInfo->P3c4, 0x2C,
- pVBInfo->VCLKData[index].SR2C);
+ xgifb_reg_set(pVBInfo->P3c4, 0x2B, XGI_VCLKData[index].SR2B);
+ xgifb_reg_set(pVBInfo->P3c4, 0x2C, XGI_VCLKData[index].SR2C);
xgifb_reg_set(pVBInfo->P3c4, 0x2D, 0x01);
} else if ((pVBInfo->VBType & (VB_SIS301B | VB_SIS302B | VB_SIS301LV
| VB_SIS302LV | VB_XGI301C)) && (pVBInfo->VBInfo
@@ -987,24 +961,22 @@
pVBInfo);
data = xgifb_reg_get(pVBInfo->P3c4, 0x31) & 0xCF;
xgifb_reg_set(pVBInfo->P3c4, 0x31, data);
- data = pVBInfo->VBVCLKData[vclkindex].Part4_A;
+ data = XGI_VBVCLKData[vclkindex].Part4_A;
xgifb_reg_set(pVBInfo->P3c4, 0x2B, data);
- data = pVBInfo->VBVCLKData[vclkindex].Part4_B;
+ data = XGI_VBVCLKData[vclkindex].Part4_B;
xgifb_reg_set(pVBInfo->P3c4, 0x2C, data);
xgifb_reg_set(pVBInfo->P3c4, 0x2D, 0x01);
} else {
- index = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_CRTVCLK;
+ index = XGI330_RefIndex[RefreshRateTableIndex].Ext_CRTVCLK;
data = xgifb_reg_get(pVBInfo->P3c4, 0x31) & 0xCF;
xgifb_reg_set(pVBInfo->P3c4, 0x31, data);
- xgifb_reg_set(pVBInfo->P3c4, 0x2B,
- pVBInfo->VCLKData[index].SR2B);
- xgifb_reg_set(pVBInfo->P3c4, 0x2C,
- pVBInfo->VCLKData[index].SR2C);
+ xgifb_reg_set(pVBInfo->P3c4, 0x2B, XGI_VCLKData[index].SR2B);
+ xgifb_reg_set(pVBInfo->P3c4, 0x2C, XGI_VCLKData[index].SR2C);
xgifb_reg_set(pVBInfo->P3c4, 0x2D, 0x01);
}
if (HwDeviceExtension->jChipType >= XG20) {
- if (pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag &
+ if (XGI330_EModeIDTable[ModeIdIndex].Ext_ModeFlag &
HalfDCLK) {
data = xgifb_reg_get(pVBInfo->P3c4, 0x2B);
xgifb_reg_set(pVBInfo->P3c4, 0x2B, data);
@@ -1064,9 +1036,9 @@
unsigned char index;
- index = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_CRTVCLK;
+ index = XGI330_RefIndex[RefreshRateTableIndex].Ext_CRTVCLK;
index &= IndexMask;
- VCLK = pVBInfo->VCLKData[index].CLOCK;
+ VCLK = XGI_VCLKData[index].CLOCK;
data = xgifb_reg_get(pVBInfo->P3c4, 0x32);
data &= 0xf3;
@@ -1102,8 +1074,8 @@
unsigned short data, data2, data3, infoflag = 0, modeflag, resindex,
xres;
- modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
- infoflag = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_InfoFlag;
+ modeflag = XGI330_EModeIDTable[ModeIdIndex].Ext_ModeFlag;
+ infoflag = XGI330_RefIndex[RefreshRateTableIndex].Ext_InfoFlag;
if (xgifb_reg_get(pVBInfo->P3d4, 0x31) & 0x01)
xgifb_reg_and_or(pVBInfo->P3c4, 0x1F, 0x3F, 0x00);
@@ -1120,8 +1092,8 @@
data2 |= 0x20;
xgifb_reg_and_or(pVBInfo->P3c4, 0x06, ~0x3F, data2);
- resindex = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO;
- xres = pVBInfo->ModeResInfo[resindex].HTotal; /* xres->ax */
+ resindex = XGI330_EModeIDTable[ModeIdIndex].Ext_RESINFO;
+ xres = XGI330_ModeResInfo[resindex].HTotal; /* xres->ax */
data = 0x0000;
if (infoflag & InterlaceMode) {
@@ -1282,13 +1254,13 @@
unsigned short resindex, xres, yres, modeflag;
/* si+Ext_ResInfo */
- modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO;
+ modeflag = XGI330_EModeIDTable[ModeIdIndex].Ext_RESINFO;
/* si+Ext_ResInfo */
- resindex = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO;
+ resindex = XGI330_EModeIDTable[ModeIdIndex].Ext_RESINFO;
- xres = pVBInfo->ModeResInfo[resindex].HTotal;
- yres = pVBInfo->ModeResInfo[resindex].VTotal;
+ xres = XGI330_ModeResInfo[resindex].HTotal;
+ yres = XGI330_ModeResInfo[resindex].VTotal;
if (modeflag & HalfDCLK)
xres = xres << 1;
@@ -1305,64 +1277,21 @@
pVBInfo->VDE = yres;
}
-static void *XGI_GetLcdPtr(unsigned short BX, unsigned short ModeNo,
+static void const *XGI_GetLcdPtr(struct XGI330_LCDDataTablStruct const *table,
+ unsigned short ModeNo,
unsigned short ModeIdIndex,
unsigned short RefreshRateTableIndex,
struct vb_device_info *pVBInfo)
{
- unsigned short i, tempdx, tempbx, tempal, modeflag, table;
+ unsigned short i, tempdx, tempbx, modeflag;
- struct XGI330_LCDDataTablStruct *tempdi = NULL;
+ tempbx = 0;
- tempbx = BX;
+ modeflag = XGI330_EModeIDTable[ModeIdIndex].Ext_ModeFlag;
- modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
- tempal = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_CRT2CRTC;
-
- tempal = tempal & 0x0f;
-
- if (tempbx <= 1) { /* ExpLink */
- tempal = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_CRT2CRTC;
-
- if (pVBInfo->VBInfo & XGI_SetCRT2ToLCDA) {
- tempal = pVBInfo->RefIndex[RefreshRateTableIndex].
- Ext_CRT2CRTC2;
- }
-
- if (tempbx & 0x01)
- tempal = (tempal >> 4);
-
- tempal = (tempal & 0x0f);
- }
-
- switch (tempbx) {
- case 0:
- case 1:
- tempdi = xgifb_epllcd_crt1;
- break;
- case 2:
- tempdi = XGI_EPLLCDDataPtr;
- break;
- case 3:
- tempdi = XGI_EPLLCDDesDataPtr;
- break;
- case 4:
- tempdi = XGI_LCDDataTable;
- break;
- case 5:
- tempdi = XGI_LCDDesDataTable;
- break;
- default:
- break;
- }
-
- if (tempdi == NULL) /* OEMUtil */
- return NULL;
-
- table = tempbx;
i = 0;
- while (tempdi[i].PANELID != 0xff) {
+ while (table[i].PANELID != 0xff) {
tempdx = pVBInfo->LCDResInfo;
if (tempbx & 0x0080) { /* OEMUtil */
tempbx &= (~0x0080);
@@ -1372,341 +1301,21 @@
if (pVBInfo->LCDInfo & EnableScalingLCD)
tempdx &= (~PanelResInfo);
- if (tempdi[i].PANELID == tempdx) {
- tempbx = tempdi[i].MASK;
+ if (table[i].PANELID == tempdx) {
+ tempbx = table[i].MASK;
tempdx = pVBInfo->LCDInfo;
if (modeflag & HalfDCLK)
tempdx |= SetLCDLowResolution;
tempbx &= tempdx;
- if (tempbx == tempdi[i].CAP)
+ if (tempbx == table[i].CAP)
break;
}
i++;
}
- if (table == 0) {
- switch (tempdi[i].DATAPTR) {
- case 0:
- return &XGI_LVDSCRT11024x768_1_H[tempal];
- break;
- case 1:
- return &XGI_LVDSCRT11024x768_2_H[tempal];
- break;
- case 2:
- return &XGI_LVDSCRT11280x1024_1_H[tempal];
- break;
- case 3:
- return &XGI_LVDSCRT11280x1024_2_H[tempal];
- break;
- case 4:
- return &XGI_LVDSCRT11400x1050_1_H[tempal];
- break;
- case 5:
- return &XGI_LVDSCRT11400x1050_2_H[tempal];
- break;
- case 6:
- return &XGI_LVDSCRT11600x1200_1_H[tempal];
- break;
- case 7:
- return &XGI_LVDSCRT11024x768_1_Hx75[tempal];
- break;
- case 8:
- return &XGI_LVDSCRT11024x768_2_Hx75[tempal];
- break;
- case 9:
- return &XGI_LVDSCRT11280x1024_1_Hx75[tempal];
- break;
- case 10:
- return &XGI_LVDSCRT11280x1024_2_Hx75[tempal];
- break;
- default:
- break;
- }
- } else if (table == 1) {
- switch (tempdi[i].DATAPTR) {
- case 0:
- return &XGI_LVDSCRT11024x768_1_V[tempal];
- break;
- case 1:
- return &XGI_LVDSCRT11024x768_2_V[tempal];
- break;
- case 2:
- return &XGI_LVDSCRT11280x1024_1_V[tempal];
- break;
- case 3:
- return &XGI_LVDSCRT11280x1024_2_V[tempal];
- break;
- case 4:
- return &XGI_LVDSCRT11400x1050_1_V[tempal];
- break;
- case 5:
- return &XGI_LVDSCRT11400x1050_2_V[tempal];
- break;
- case 6:
- return &XGI_LVDSCRT11600x1200_1_V[tempal];
- break;
- case 7:
- return &XGI_LVDSCRT11024x768_1_Vx75[tempal];
- break;
- case 8:
- return &XGI_LVDSCRT11024x768_2_Vx75[tempal];
- break;
- case 9:
- return &XGI_LVDSCRT11280x1024_1_Vx75[tempal];
- break;
- case 10:
- return &XGI_LVDSCRT11280x1024_2_Vx75[tempal];
- break;
- default:
- break;
- }
- } else if (table == 2) {
- switch (tempdi[i].DATAPTR) {
- case 0:
- return &XGI_LVDS1024x768Data_1[tempal];
- break;
- case 1:
- return &XGI_LVDS1024x768Data_2[tempal];
- break;
- case 2:
- return &XGI_LVDS1280x1024Data_1[tempal];
- break;
- case 3:
- return &XGI_LVDS1280x1024Data_2[tempal];
- break;
- case 4:
- return &XGI_LVDS1400x1050Data_1[tempal];
- break;
- case 5:
- return &XGI_LVDS1400x1050Data_2[tempal];
- break;
- case 6:
- return &XGI_LVDS1600x1200Data_1[tempal];
- break;
- case 7:
- return &XGI_LVDSNoScalingData[tempal];
- break;
- case 8:
- return &XGI_LVDS1024x768Data_1x75[tempal];
- break;
- case 9:
- return &XGI_LVDS1024x768Data_2x75[tempal];
- break;
- case 10:
- return &XGI_LVDS1280x1024Data_1x75[tempal];
- break;
- case 11:
- return &XGI_LVDS1280x1024Data_2x75[tempal];
- break;
- case 12:
- return &XGI_LVDSNoScalingDatax75[tempal];
- break;
- default:
- break;
- }
- } else if (table == 3) {
- switch (tempdi[i].DATAPTR) {
- case 0:
- return &XGI_LVDS1024x768Des_1[tempal];
- break;
- case 1:
- return &XGI_LVDS1024x768Des_3[tempal];
- break;
- case 2:
- return &XGI_LVDS1024x768Des_2[tempal];
- break;
- case 3:
- return &XGI_LVDS1280x1024Des_1[tempal];
- break;
- case 4:
- return &XGI_LVDS1280x1024Des_2[tempal];
- break;
- case 5:
- return &XGI_LVDS1400x1050Des_1[tempal];
- break;
- case 6:
- return &XGI_LVDS1400x1050Des_2[tempal];
- break;
- case 7:
- return &XGI_LVDS1600x1200Des_1[tempal];
- break;
- case 8:
- return &XGI_LVDSNoScalingDesData[tempal];
- break;
- case 9:
- return &XGI_LVDS1024x768Des_1x75[tempal];
- break;
- case 10:
- return &XGI_LVDS1024x768Des_3x75[tempal];
- break;
- case 11:
- return &XGI_LVDS1024x768Des_2x75[tempal];
- break;
- case 12:
- return &XGI_LVDS1280x1024Des_1x75[tempal];
- break;
- case 13:
- return &XGI_LVDS1280x1024Des_2x75[tempal];
- break;
- case 14:
- return &XGI_LVDSNoScalingDesDatax75[tempal];
- break;
- default:
- break;
- }
- } else if (table == 4) {
- switch (tempdi[i].DATAPTR) {
- case 0:
- return &XGI_ExtLCD1024x768Data[tempal];
- break;
- case 1:
- return &XGI_StLCD1024x768Data[tempal];
- break;
- case 2:
- return &XGI_CetLCD1024x768Data[tempal];
- break;
- case 3:
- return &XGI_ExtLCD1280x1024Data[tempal];
- break;
- case 4:
- return &XGI_StLCD1280x1024Data[tempal];
- break;
- case 5:
- return &XGI_CetLCD1280x1024Data[tempal];
- break;
- case 6:
- case 7:
- return &xgifb_lcd_1400x1050[tempal];
- break;
- case 8:
- return &XGI_CetLCD1400x1050Data[tempal];
- break;
- case 9:
- return &XGI_ExtLCD1600x1200Data[tempal];
- break;
- case 10:
- return &XGI_StLCD1600x1200Data[tempal];
- break;
- case 11:
- return &XGI_NoScalingData[tempal];
- break;
- case 12:
- return &XGI_ExtLCD1024x768x75Data[tempal];
- break;
- case 13:
- return &XGI_ExtLCD1024x768x75Data[tempal];
- break;
- case 14:
- return &XGI_CetLCD1024x768x75Data[tempal];
- break;
- case 15:
- case 16:
- return &xgifb_lcd_1280x1024x75[tempal];
- break;
- case 17:
- return &XGI_CetLCD1280x1024x75Data[tempal];
- break;
- case 18:
- return &XGI_NoScalingDatax75[tempal];
- break;
- default:
- break;
- }
- } else if (table == 5) {
- switch (tempdi[i].DATAPTR) {
- case 0:
- return &XGI_ExtLCDDes1024x768Data[tempal];
- break;
- case 1:
- return &XGI_StLCDDes1024x768Data[tempal];
- break;
- case 2:
- return &XGI_CetLCDDes1024x768Data[tempal];
- break;
- case 3:
- if ((pVBInfo->VBType & VB_SIS301LV) ||
- (pVBInfo->VBType & VB_SIS302LV))
- return &XGI_ExtLCDDLDes1280x1024Data[tempal];
- else
- return &XGI_ExtLCDDes1280x1024Data[tempal];
- break;
- case 4:
- if ((pVBInfo->VBType & VB_SIS301LV) ||
- (pVBInfo->VBType & VB_SIS302LV))
- return &XGI_StLCDDLDes1280x1024Data[tempal];
- else
- return &XGI_StLCDDes1280x1024Data[tempal];
- break;
- case 5:
- if ((pVBInfo->VBType & VB_SIS301LV) ||
- (pVBInfo->VBType & VB_SIS302LV))
- return &XGI_CetLCDDLDes1280x1024Data[tempal];
- else
- return &XGI_CetLCDDes1280x1024Data[tempal];
- break;
- case 6:
- case 7:
- if ((pVBInfo->VBType & VB_SIS301LV) ||
- (pVBInfo->VBType & VB_SIS302LV))
- return &xgifb_lcddldes_1400x1050[tempal];
- else
- return &xgifb_lcddes_1400x1050[tempal];
- break;
- case 8:
- return &XGI_CetLCDDes1400x1050Data[tempal];
- break;
- case 9:
- return &XGI_CetLCDDes1400x1050Data2[tempal];
- break;
- case 10:
- if ((pVBInfo->VBType & VB_SIS301LV) ||
- (pVBInfo->VBType & VB_SIS302LV))
- return &XGI_ExtLCDDLDes1600x1200Data[tempal];
- else
- return &XGI_ExtLCDDes1600x1200Data[tempal];
- break;
- case 11:
- if ((pVBInfo->VBType & VB_SIS301LV) ||
- (pVBInfo->VBType & VB_SIS302LV))
- return &XGI_StLCDDLDes1600x1200Data[tempal];
- else
- return &XGI_StLCDDes1600x1200Data[tempal];
- break;
- case 12:
- return &XGI_NoScalingDesData[tempal];
- break;
- case 13:
- case 14:
- return &xgifb_lcddes_1024x768x75[tempal];
- break;
- case 15:
- return &XGI_CetLCDDes1024x768x75Data[tempal];
- break;
- case 16:
- case 17:
- if ((pVBInfo->VBType & VB_SIS301LV) ||
- (pVBInfo->VBType & VB_SIS302LV))
- return &xgifb_lcddldes_1280x1024x75[tempal];
- else
- return &xgifb_lcddes_1280x1024x75[tempal];
- break;
- case 18:
- if ((pVBInfo->VBType & VB_SIS301LV) ||
- (pVBInfo->VBType & VB_SIS302LV))
- return &XGI_CetLCDDLDes1280x1024x75Data[tempal];
- else
- return &XGI_CetLCDDes1280x1024x75Data[tempal];
- break;
- case 19:
- return &XGI_NoScalingDesDatax75[tempal];
- break;
- default:
- break;
- }
- }
- return NULL;
+ return table[i].DATAPTR;
}
static struct SiS_TVData const *XGI_GetTVPtr(unsigned short ModeNo,
@@ -1716,8 +1325,8 @@
{
unsigned short i, tempdx, tempal, modeflag;
- modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
- tempal = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_CRT2CRTC;
+ modeflag = XGI330_EModeIDTable[ModeIdIndex].Ext_ModeFlag;
+ tempal = XGI330_RefIndex[RefreshRateTableIndex].Ext_CRT2CRTC;
tempal = tempal & 0x3f;
tempdx = pVBInfo->TVInfo;
@@ -1743,40 +1352,35 @@
unsigned short RefreshRateTableIndex,
struct vb_device_info *pVBInfo)
{
- unsigned short tempbx;
- struct SiS_LVDSData *LCDPtr = NULL;
+ struct SiS_LVDSData const *LCDPtr;
- tempbx = 2;
+ if (!(pVBInfo->VBInfo & (SetCRT2ToLCD | XGI_SetCRT2ToLCDA)))
+ return;
- if (pVBInfo->VBInfo & (SetCRT2ToLCD | XGI_SetCRT2ToLCDA)) {
- LCDPtr = XGI_GetLcdPtr(tempbx, ModeNo, ModeIdIndex,
- RefreshRateTableIndex, pVBInfo);
- pVBInfo->VGAHT = LCDPtr->VGAHT;
- pVBInfo->VGAVT = LCDPtr->VGAVT;
- pVBInfo->HT = LCDPtr->LCDHT;
- pVBInfo->VT = LCDPtr->LCDVT;
- }
+ LCDPtr = XGI_GetLcdPtr(XGI_EPLLCDDataPtr, ModeNo, ModeIdIndex,
+ RefreshRateTableIndex, pVBInfo);
+ pVBInfo->VGAHT = LCDPtr->VGAHT;
+ pVBInfo->VGAVT = LCDPtr->VGAVT;
+ pVBInfo->HT = LCDPtr->LCDHT;
+ pVBInfo->VT = LCDPtr->LCDVT;
- if (pVBInfo->VBInfo & (SetCRT2ToLCD | XGI_SetCRT2ToLCDA)) {
- if (!(pVBInfo->LCDInfo & (SetLCDtoNonExpanding
- | EnableScalingLCD))) {
- if ((pVBInfo->LCDResInfo == Panel_1024x768) ||
- (pVBInfo->LCDResInfo == Panel_1024x768x75)) {
- pVBInfo->HDE = 1024;
- pVBInfo->VDE = 768;
- } else if ((pVBInfo->LCDResInfo == Panel_1280x1024) ||
- (pVBInfo->LCDResInfo ==
- Panel_1280x1024x75)) {
- pVBInfo->HDE = 1280;
- pVBInfo->VDE = 1024;
- } else if (pVBInfo->LCDResInfo == Panel_1400x1050) {
- pVBInfo->HDE = 1400;
- pVBInfo->VDE = 1050;
- } else {
- pVBInfo->HDE = 1600;
- pVBInfo->VDE = 1200;
- }
- }
+ if (pVBInfo->LCDInfo & (SetLCDtoNonExpanding | EnableScalingLCD))
+ return;
+
+ if ((pVBInfo->LCDResInfo == Panel_1024x768) ||
+ (pVBInfo->LCDResInfo == Panel_1024x768x75)) {
+ pVBInfo->HDE = 1024;
+ pVBInfo->VDE = 768;
+ } else if ((pVBInfo->LCDResInfo == Panel_1280x1024) ||
+ (pVBInfo->LCDResInfo == Panel_1280x1024x75)) {
+ pVBInfo->HDE = 1280;
+ pVBInfo->VDE = 1024;
+ } else if (pVBInfo->LCDResInfo == Panel_1400x1050) {
+ pVBInfo->HDE = 1400;
+ pVBInfo->VDE = 1050;
+ } else {
+ pVBInfo->HDE = 1600;
+ pVBInfo->VDE = 1200;
}
}
@@ -1786,32 +1390,29 @@
struct vb_device_info *pVBInfo)
{
unsigned char index;
- unsigned short tempbx, i;
- struct XGI_LVDSCRT1HDataStruct *LCDPtr = NULL;
- struct XGI_LVDSCRT1VDataStruct *LCDPtr1 = NULL;
+ unsigned short i;
+ struct XGI_LVDSCRT1HDataStruct const *LCDPtr = NULL;
+ struct XGI_LVDSCRT1VDataStruct const *LCDPtr1 = NULL;
- index = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_CRT2CRTC;
+ index = XGI330_RefIndex[RefreshRateTableIndex].Ext_CRT2CRTC;
index = index & IndexMask;
- tempbx = 0;
-
if (pVBInfo->VBInfo & (SetCRT2ToLCD | XGI_SetCRT2ToLCDA)) {
- LCDPtr = XGI_GetLcdPtr(tempbx, ModeNo, ModeIdIndex,
+ LCDPtr = XGI_GetLcdPtr(xgifb_epllcd_crt1_h, ModeNo, ModeIdIndex,
RefreshRateTableIndex, pVBInfo);
for (i = 0; i < 8; i++)
- pVBInfo->TimingH[0].data[i] = LCDPtr[0].Reg[i];
+ pVBInfo->TimingH.data[i] = LCDPtr[0].Reg[i];
}
XGI_SetCRT1Timing_H(pVBInfo, HwDeviceExtension);
- tempbx = 1;
-
if (pVBInfo->VBInfo & (SetCRT2ToLCD | XGI_SetCRT2ToLCDA)) {
- LCDPtr1 = XGI_GetLcdPtr(tempbx, ModeNo, ModeIdIndex,
- RefreshRateTableIndex, pVBInfo);
+ LCDPtr1 = XGI_GetLcdPtr(xgifb_epllcd_crt1_v, ModeNo,
+ ModeIdIndex, RefreshRateTableIndex,
+ pVBInfo);
for (i = 0; i < 7; i++)
- pVBInfo->TimingV[0].data[i] = LCDPtr1[0].Reg[i];
+ pVBInfo->TimingV.data[i] = LCDPtr1[0].Reg[i];
}
XGI_SetCRT1Timing_V(ModeIdIndex, ModeNo, pVBInfo);
@@ -1895,17 +1496,18 @@
{
unsigned short tempbx, tempax, tempcx, tempdx, push1, push2, modeflag;
unsigned long temp, temp1, temp2, temp3, push3;
- struct XGI_LCDDesStruct *LCDPtr = NULL;
- struct XGI330_LCDDataDesStruct2 *LCDPtr1 = NULL;
+ struct XGI_LCDDesStruct const *LCDPtr = NULL;
+ struct XGI330_LCDDataDesStruct2 const *LCDPtr1 = NULL;
- modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
- tempbx = 3;
+ modeflag = XGI330_EModeIDTable[ModeIdIndex].Ext_ModeFlag;
if (pVBInfo->LCDInfo & EnableScalingLCD)
- LCDPtr1 = XGI_GetLcdPtr(tempbx, ModeNo, ModeIdIndex,
- RefreshRateTableIndex, pVBInfo);
+ LCDPtr1 = XGI_GetLcdPtr(XGI_EPLLCDDesDataPtr, ModeNo,
+ ModeIdIndex, RefreshRateTableIndex,
+ pVBInfo);
else
- LCDPtr = XGI_GetLcdPtr(tempbx, ModeNo, ModeIdIndex,
- RefreshRateTableIndex, pVBInfo);
+ LCDPtr = XGI_GetLcdPtr(XGI_EPLLCDDesDataPtr, ModeNo,
+ ModeIdIndex, RefreshRateTableIndex,
+ pVBInfo);
XGI_GetLCDSync(&tempax, &tempbx, pVBInfo);
push1 = tempbx;
@@ -2179,7 +1781,7 @@
unsigned char tempal;
/* si+Ext_ResInfo */
- modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
+ modeflag = XGI330_EModeIDTable[ModeIdIndex].Ext_ModeFlag;
if ((pVBInfo->SetFlag & ProgrammingCRT2) &&
(!(pVBInfo->LCDInfo & EnableScalingLCD))) { /* {LCDA/LCDB} */
@@ -2241,7 +1843,7 @@
if ((pVBInfo->LCDInfo & EnableScalingLCD) && (modeflag & Charx8Dot))
tempal = tempal ^ tempal; /* ; set to VCLK25MHz always */
- tempal = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_CRTVCLK;
+ tempal = XGI330_RefIndex[RefreshRateTableIndex].Ext_CRTVCLK;
return tempal;
}
@@ -2425,7 +2027,7 @@
{
unsigned short tempax, push, tempbx, temp, modeflag;
- modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
+ modeflag = XGI330_EModeIDTable[ModeIdIndex].Ext_ModeFlag;
pVBInfo->SetFlag = 0;
pVBInfo->ModeType = modeflag & ModeTypeMask;
tempbx = 0;
@@ -2501,7 +2103,7 @@
} else {
temp = 0x017C;
}
- } else { /* 3nd party chip */
+ } else { /* 3rd party chip */
temp = SetCRT2ToLCD;
}
@@ -2611,8 +2213,8 @@
resinfo = 0;
if (pVBInfo->VBInfo & SetCRT2ToTV) {
- modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
- resinfo = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO;
+ modeflag = XGI330_EModeIDTable[ModeIdIndex].Ext_ModeFlag;
+ resinfo = XGI330_EModeIDTable[ModeIdIndex].Ext_RESINFO;
if (pVBInfo->VBInfo & SetCRT2ToTV) {
temp = xgifb_reg_get(pVBInfo->P3d4, 0x35);
@@ -2697,9 +2299,9 @@
pVBInfo->LCDTypeInfo = 0;
pVBInfo->LCDInfo = 0;
- modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
+ modeflag = XGI330_EModeIDTable[ModeIdIndex].Ext_ModeFlag;
/* si+Ext_ResInfo // */
- resinfo = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO;
+ resinfo = XGI330_EModeIDTable[ModeIdIndex].Ext_RESINFO;
temp = xgifb_reg_get(pVBInfo->P3d4, 0x36); /* Get LCD Res.Info */
tempbx = temp & 0x0F;
@@ -2778,9 +2380,9 @@
unsigned short *ModeIdIndex, struct vb_device_info *pVBInfo)
{
for (*ModeIdIndex = 0;; (*ModeIdIndex)++) {
- if (pVBInfo->EModeIDTable[*ModeIdIndex].Ext_ModeID == ModeNo)
+ if (XGI330_EModeIDTable[*ModeIdIndex].Ext_ModeID == ModeNo)
break;
- if (pVBInfo->EModeIDTable[*ModeIdIndex].Ext_ModeID == 0xFF)
+ if (XGI330_EModeIDTable[*ModeIdIndex].Ext_ModeID == 0xFF)
return 0;
}
@@ -3020,11 +2622,11 @@
{
unsigned short xres, yres, modeflag, resindex;
- resindex = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO;
- xres = pVBInfo->ModeResInfo[resindex].HTotal; /* xres->ax */
- yres = pVBInfo->ModeResInfo[resindex].VTotal; /* yres->bx */
+ resindex = XGI330_EModeIDTable[ModeIdIndex].Ext_RESINFO;
+ xres = XGI330_ModeResInfo[resindex].HTotal; /* xres->ax */
+ yres = XGI330_ModeResInfo[resindex].VTotal; /* yres->bx */
/* si+St_ModeFlag */
- modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
+ modeflag = XGI330_EModeIDTable[ModeIdIndex].Ext_ModeFlag;
if (modeflag & HalfDCLK)
xres *= 2;
@@ -3099,19 +2701,19 @@
pVBInfo->RVBHCMAX = 1;
pVBInfo->RVBHCFACT = 1;
- modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
- CRT1Index = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_CRT1CRTC;
+ modeflag = XGI330_EModeIDTable[ModeIdIndex].Ext_ModeFlag;
+ CRT1Index = XGI330_RefIndex[RefreshRateTableIndex].Ext_CRT1CRTC;
CRT1Index &= IndexMask;
- temp1 = (unsigned short) pVBInfo->XGINEWUB_CRT1Table[CRT1Index].CR[0];
- temp2 = (unsigned short) pVBInfo->XGINEWUB_CRT1Table[CRT1Index].CR[5];
+ temp1 = (unsigned short) XGI_CRT1Table[CRT1Index].CR[0];
+ temp2 = (unsigned short) XGI_CRT1Table[CRT1Index].CR[5];
tempax = (temp1 & 0xFF) | ((temp2 & 0x03) << 8);
- tempbx = (unsigned short) pVBInfo->XGINEWUB_CRT1Table[CRT1Index].CR[8];
+ tempbx = (unsigned short) XGI_CRT1Table[CRT1Index].CR[8];
tempcx = (unsigned short)
- pVBInfo->XGINEWUB_CRT1Table[CRT1Index].CR[14] << 8;
+ XGI_CRT1Table[CRT1Index].CR[14] << 8;
tempcx &= 0x0100;
tempcx = tempcx << 2;
tempbx |= tempcx;
- temp1 = (unsigned short) pVBInfo->XGINEWUB_CRT1Table[CRT1Index].CR[9];
+ temp1 = (unsigned short) XGI_CRT1Table[CRT1Index].CR[9];
if (temp1 & 0x01)
tempbx |= 0x0100;
@@ -3136,13 +2738,13 @@
unsigned short RefreshRateTableIndex,
struct vb_device_info *pVBInfo)
{
- unsigned short tempax = 0, tempbx, modeflag, resinfo;
+ unsigned short tempax = 0, tempbx = 0, modeflag, resinfo;
- struct SiS_LCDData *LCDPtr = NULL;
+ struct SiS_LCDData const *LCDPtr = NULL;
/* si+Ext_ResInfo */
- modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
- resinfo = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO;
+ modeflag = XGI330_EModeIDTable[ModeIdIndex].Ext_ModeFlag;
+ resinfo = XGI330_EModeIDTable[ModeIdIndex].Ext_RESINFO;
pVBInfo->NewFlickerMode = 0;
pVBInfo->RVBHRS = 50;
@@ -3152,10 +2754,8 @@
return;
}
- tempbx = 4;
-
if (pVBInfo->VBInfo & (SetCRT2ToLCD | XGI_SetCRT2ToLCDA)) {
- LCDPtr = XGI_GetLcdPtr(tempbx, ModeNo, ModeIdIndex,
+ LCDPtr = XGI_GetLcdPtr(XGI_LCDDataTable, ModeNo, ModeIdIndex,
RefreshRateTableIndex, pVBInfo);
pVBInfo->RVBHCMAX = LCDPtr->RVBHCMAX;
@@ -3345,7 +2945,7 @@
short index;
unsigned short modeflag;
- modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
+ modeflag = XGI330_EModeIDTable[ModeIdIndex].Ext_ModeFlag;
index = (modeflag & ModeTypeMask) - ModeEGA;
if (index < 0)
@@ -3363,12 +2963,12 @@
unsigned short temp, colordepth, modeinfo, index, infoflag,
ColorDepth[] = { 0x01, 0x02, 0x04 };
- modeinfo = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeInfo;
- infoflag = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_InfoFlag;
+ modeinfo = XGI330_EModeIDTable[ModeIdIndex].Ext_ModeInfo;
+ infoflag = XGI330_RefIndex[RefreshRateTableIndex].Ext_InfoFlag;
index = (modeinfo >> 8) & 0xFF;
- temp = pVBInfo->ScreenOffset[index];
+ temp = XGI330_ScreenOffset[index];
if (infoflag & InterlaceMode)
temp = temp << 1;
@@ -3424,9 +3024,9 @@
{
unsigned short tempcx = 0, CRT1Index = 0, resinfo = 0;
- CRT1Index = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_CRT1CRTC;
+ CRT1Index = XGI330_RefIndex[RefreshRateTableIndex].Ext_CRT1CRTC;
CRT1Index &= IndexMask;
- resinfo = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO;
+ resinfo = XGI330_EModeIDTable[ModeIdIndex].Ext_RESINFO;
XGI_SetCRT2Offset(ModeNo, ModeIdIndex, RefreshRateTableIndex,
HwDeviceExtension, pVBInfo);
@@ -3447,10 +3047,10 @@
unsigned short temp = 0, tempax = 0, tempbx = 0, tempcx = 0,
pushbx = 0, CRT1Index = 0, modeflag, resinfo = 0;
- CRT1Index = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_CRT1CRTC;
+ CRT1Index = XGI330_RefIndex[RefreshRateTableIndex].Ext_CRT1CRTC;
CRT1Index &= IndexMask;
- resinfo = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO;
- modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
+ resinfo = XGI330_EModeIDTable[ModeIdIndex].Ext_RESINFO;
+ modeflag = XGI330_EModeIDTable[ModeIdIndex].Ext_ModeFlag;
/* bainy change table name */
if (modeflag & HalfDCLK) {
@@ -3469,14 +3069,13 @@
tempcx += tempbx;
if (pVBInfo->VBInfo & SetCRT2ToRAMDAC) {
- tempbx = pVBInfo->XGINEWUB_CRT1Table[CRT1Index].CR[4];
- tempbx |= ((pVBInfo->
- XGINEWUB_CRT1Table[CRT1Index].CR[14] &
+ tempbx = XGI_CRT1Table[CRT1Index].CR[4];
+ tempbx |= ((XGI_CRT1Table[CRT1Index].CR[14] &
0xC0) << 2);
tempbx = (tempbx - 3) << 3; /* (VGAHRS-3)*8 */
- tempcx = pVBInfo->XGINEWUB_CRT1Table[CRT1Index].CR[5];
+ tempcx = XGI_CRT1Table[CRT1Index].CR[5];
tempcx &= 0x1F;
- temp = pVBInfo->XGINEWUB_CRT1Table[CRT1Index].CR[15];
+ temp = XGI_CRT1Table[CRT1Index].CR[15];
temp = (temp & 0x04) << (5 - 2); /* VGAHRE D[5] */
tempcx = ((tempcx | temp) - 3) << 3; /* (VGAHRE-3)*8 */
}
@@ -3505,14 +3104,13 @@
tempcx += tempbx;
if (pVBInfo->VBInfo & SetCRT2ToRAMDAC) {
- tempbx = pVBInfo->XGINEWUB_CRT1Table[CRT1Index].CR[3];
- tempbx |= ((pVBInfo->
- XGINEWUB_CRT1Table[CRT1Index].CR[5] &
+ tempbx = XGI_CRT1Table[CRT1Index].CR[3];
+ tempbx |= ((XGI_CRT1Table[CRT1Index].CR[5] &
0xC0) << 2);
tempbx = (tempbx - 3) << 3; /* (VGAHRS-3)*8 */
- tempcx = pVBInfo->XGINEWUB_CRT1Table[CRT1Index].CR[4];
+ tempcx = XGI_CRT1Table[CRT1Index].CR[4];
tempcx &= 0x1F;
- temp = pVBInfo->XGINEWUB_CRT1Table[CRT1Index].CR[6];
+ temp = XGI_CRT1Table[CRT1Index].CR[6];
temp = (temp & 0x04) << (5 - 2); /* VGAHRE D[5] */
tempcx = ((tempcx | temp) - 3) << 3; /* (VGAHRE-3)*8 */
tempbx += 16;
@@ -3554,8 +3152,8 @@
tempcx = ((pVBInfo->VGAVT - pVBInfo->VGAVDE) >> 4) + tempbx + 1;
if (pVBInfo->VBInfo & SetCRT2ToRAMDAC) {
- tempbx = pVBInfo->XGINEWUB_CRT1Table[CRT1Index].CR[10];
- temp = pVBInfo->XGINEWUB_CRT1Table[CRT1Index].CR[9];
+ tempbx = XGI_CRT1Table[CRT1Index].CR[10];
+ temp = XGI_CRT1Table[CRT1Index].CR[9];
if (temp & 0x04)
tempbx |= 0x0100;
@@ -3563,12 +3161,12 @@
if (temp & 0x080)
tempbx |= 0x0200;
- temp = pVBInfo->XGINEWUB_CRT1Table[CRT1Index].CR[14];
+ temp = XGI_CRT1Table[CRT1Index].CR[14];
if (temp & 0x08)
tempbx |= 0x0400;
- temp = pVBInfo->XGINEWUB_CRT1Table[CRT1Index].CR[11];
+ temp = XGI_CRT1Table[CRT1Index].CR[11];
tempcx = (tempcx & 0xFF00) | (temp & 0x00FF);
}
@@ -3609,9 +3207,9 @@
modeflag, CRT1Index;
/* si+Ext_ResInfo */
- modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
- resinfo = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO;
- CRT1Index = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_CRT1CRTC;
+ modeflag = XGI330_EModeIDTable[ModeIdIndex].Ext_ModeFlag;
+ resinfo = XGI330_EModeIDTable[ModeIdIndex].Ext_RESINFO;
+ CRT1Index = XGI330_RefIndex[RefreshRateTableIndex].Ext_CRT1CRTC;
CRT1Index &= IndexMask;
if (!(pVBInfo->VBInfo & SetInSlaveMode))
@@ -3909,9 +3507,9 @@
unsigned long longtemp, tempeax, tempebx, temp2, tempecx;
/* si+Ext_ResInfo */
- modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
- resinfo = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO;
- crt2crtc = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_CRT2CRTC;
+ modeflag = XGI330_EModeIDTable[ModeIdIndex].Ext_ModeFlag;
+ resinfo = XGI330_EModeIDTable[ModeIdIndex].Ext_RESINFO;
+ crt2crtc = XGI330_RefIndex[RefreshRateTableIndex].Ext_CRT2CRTC;
tempax = 0;
@@ -4345,12 +3943,12 @@
unsigned short push1, push2, pushbx, tempax, tempbx, tempcx, temp,
tempah, tempbh, tempch, resinfo, modeflag, CRT1Index;
- struct XGI_LCDDesStruct *LCDBDesPtr = NULL;
+ struct XGI_LCDDesStruct const *LCDBDesPtr = NULL;
/* si+Ext_ResInfo */
- modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
- resinfo = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO;
- CRT1Index = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_CRT1CRTC;
+ modeflag = XGI330_EModeIDTable[ModeIdIndex].Ext_ModeFlag;
+ resinfo = XGI330_EModeIDTable[ModeIdIndex].Ext_RESINFO;
+ CRT1Index = XGI330_RefIndex[RefreshRateTableIndex].Ext_CRT1CRTC;
CRT1Index &= IndexMask;
if (!(pVBInfo->VBInfo & SetCRT2ToLCD))
@@ -4390,10 +3988,15 @@
xgifb_reg_and_or(pVBInfo->Part2Port, 0x17, 0xFB, 0x00);
xgifb_reg_and_or(pVBInfo->Part2Port, 0x18, 0xDF, 0x00);
- /* Customized LCDB Des no add */
- tempbx = 5;
- LCDBDesPtr = XGI_GetLcdPtr(tempbx, ModeNo, ModeIdIndex,
- RefreshRateTableIndex, pVBInfo);
+ /* Customized LCDB Does not add */
+ if ((pVBInfo->VBType & VB_SIS301LV) || (pVBInfo->VBType & VB_SIS302LV))
+ LCDBDesPtr = XGI_GetLcdPtr(xgifb_lcddldes, ModeNo, ModeIdIndex,
+ RefreshRateTableIndex, pVBInfo);
+ else
+ LCDBDesPtr = XGI_GetLcdPtr(XGI_LCDDesDataTable, ModeNo,
+ ModeIdIndex, RefreshRateTableIndex,
+ pVBInfo);
+
tempah = pVBInfo->LCDResInfo;
tempah &= PanelResInfo;
@@ -4545,12 +4148,11 @@
/* Output : di -> Tap4 Reg. Setting Pointer */
/* Description : */
/* --------------------------------------------------------------------- */
-static struct XGI301C_Tap4TimingStruct *XGI_GetTap4Ptr(unsigned short tempcx,
- struct vb_device_info *pVBInfo)
+static struct XGI301C_Tap4TimingStruct const
+*XGI_GetTap4Ptr(unsigned short tempcx, struct vb_device_info *pVBInfo)
{
unsigned short tempax, tempbx, i;
-
- struct XGI301C_Tap4TimingStruct *Tap4TimingPtr;
+ struct XGI301C_Tap4TimingStruct const *Tap4TimingPtr;
if (tempcx == 0) {
tempax = pVBInfo->VGAHDE;
@@ -4591,8 +4193,7 @@
static void XGI_SetTap4Regs(struct vb_device_info *pVBInfo)
{
unsigned short i, j;
-
- struct XGI301C_Tap4TimingStruct *Tap4TimingPtr;
+ struct XGI301C_Tap4TimingStruct const *Tap4TimingPtr;
if (!(pVBInfo->VBType & VB_XGI301C))
return;
@@ -4628,7 +4229,7 @@
unsigned short modeflag;
/* si+Ext_ResInfo */
- modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
+ modeflag = XGI330_EModeIDTable[ModeIdIndex].Ext_ModeFlag;
xgifb_reg_set(pVBInfo->Part3Port, 0x00, 0x00);
if (pVBInfo->TVInfo & TVSetPAL) {
@@ -4687,7 +4288,7 @@
unsigned long tempebx, tempeax, templong;
/* si+Ext_ResInfo */
- modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
+ modeflag = XGI330_EModeIDTable[ModeIdIndex].Ext_ModeFlag;
temp = pVBInfo->RVBHCFACT;
xgifb_reg_set(pVBInfo->Part4Port, 0x13, temp);
@@ -4890,11 +4491,11 @@
{
unsigned short xres, yres, colordepth, modeflag, resindex;
- resindex = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO;
- xres = pVBInfo->ModeResInfo[resindex].HTotal; /* xres->ax */
- yres = pVBInfo->ModeResInfo[resindex].VTotal; /* yres->bx */
+ resindex = XGI330_EModeIDTable[ModeIdIndex].Ext_RESINFO;
+ xres = XGI330_ModeResInfo[resindex].HTotal; /* xres->ax */
+ yres = XGI330_ModeResInfo[resindex].VTotal; /* yres->bx */
/* si+St_ModeFlag */
- modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
+ modeflag = XGI330_EModeIDTable[ModeIdIndex].Ext_ModeFlag;
if (!(modeflag & Charx8Dot)) {
xres /= 9;
@@ -4952,11 +4553,11 @@
else
XGI_SetXG21FPBits(pVBInfo);
- resindex = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO;
- xres = pVBInfo->ModeResInfo[resindex].HTotal; /* xres->ax */
- yres = pVBInfo->ModeResInfo[resindex].VTotal; /* yres->bx */
+ resindex = XGI330_EModeIDTable[ModeIdIndex].Ext_RESINFO;
+ xres = XGI330_ModeResInfo[resindex].HTotal; /* xres->ax */
+ yres = XGI330_ModeResInfo[resindex].VTotal; /* yres->bx */
/* si+St_ModeFlag */
- modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
+ modeflag = XGI330_EModeIDTable[ModeIdIndex].Ext_ModeFlag;
if (!(modeflag & Charx8Dot))
xres = xres * 8 / 9;
@@ -5619,8 +5220,8 @@
struct vb_device_info *pVBInfo)
{
unsigned short tempbx, index;
-
- unsigned char tempcl, tempch, tempal, *filterPtr;
+ unsigned char const *filterPtr;
+ unsigned char tempcl, tempch, tempal;
XGI_GetTVPtrIndex2(&tempbx, &tempcl, &tempch, pVBInfo); /* bx, cl, ch */
@@ -5653,7 +5254,7 @@
return;
}
- tempal = pVBInfo->EModeIDTable[ModeIdIndex].VB_ExtTVYFilterIndex;
+ tempal = XGI330_EModeIDTable[ModeIdIndex].VB_ExtTVYFilterIndex;
if (tempcl == 0)
index = tempal * 4;
else
@@ -5915,7 +5516,7 @@
unsigned short RefreshRateTableIndex, i, modeflag, index, temp;
- modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
+ modeflag = XGI330_EModeIDTable[ModeIdIndex].Ext_ModeFlag;
index = xgifb_reg_get(pVBInfo->P3d4, 0x33);
index = index >> pVBInfo->SelectCRT2Rate;
@@ -5948,31 +5549,30 @@
}
}
- RefreshRateTableIndex = pVBInfo->EModeIDTable[ModeIdIndex].REFindex;
- ModeNo = pVBInfo->RefIndex[RefreshRateTableIndex].ModeID;
+ RefreshRateTableIndex = XGI330_EModeIDTable[ModeIdIndex].REFindex;
+ ModeNo = XGI330_RefIndex[RefreshRateTableIndex].ModeID;
if (pXGIHWDE->jChipType >= XG20) { /* for XG20, XG21, XG27 */
- if ((pVBInfo->RefIndex[RefreshRateTableIndex].XRes == 800) &&
- (pVBInfo->RefIndex[RefreshRateTableIndex].YRes == 600)) {
+ if ((XGI330_RefIndex[RefreshRateTableIndex].XRes == 800) &&
+ (XGI330_RefIndex[RefreshRateTableIndex].YRes == 600)) {
index++;
}
/* do the similar adjustment like XGISearchCRT1Rate() */
- if ((pVBInfo->RefIndex[RefreshRateTableIndex].XRes == 1024) &&
- (pVBInfo->RefIndex[RefreshRateTableIndex].YRes == 768)) {
+ if ((XGI330_RefIndex[RefreshRateTableIndex].XRes == 1024) &&
+ (XGI330_RefIndex[RefreshRateTableIndex].YRes == 768)) {
index++;
}
- if ((pVBInfo->RefIndex[RefreshRateTableIndex].XRes == 1280) &&
- (pVBInfo->RefIndex[RefreshRateTableIndex].YRes == 1024)) {
+ if ((XGI330_RefIndex[RefreshRateTableIndex].XRes == 1280) &&
+ (XGI330_RefIndex[RefreshRateTableIndex].YRes == 1024)) {
index++;
}
}
i = 0;
do {
- if (pVBInfo->RefIndex[RefreshRateTableIndex + i].
+ if (XGI330_RefIndex[RefreshRateTableIndex + i].
ModeID != ModeNo)
break;
- temp = pVBInfo->RefIndex[RefreshRateTableIndex + i].
- Ext_InfoFlag;
+ temp = XGI330_RefIndex[RefreshRateTableIndex + i].Ext_InfoFlag;
temp &= ModeTypeMask;
if (temp < pVBInfo->ModeType)
break;
@@ -5982,7 +5582,7 @@
} while (index != 0xFFFF);
if (!(pVBInfo->VBInfo & SetCRT2ToRAMDAC)) {
if (pVBInfo->VBInfo & SetInSlaveMode) {
- temp = pVBInfo->RefIndex[RefreshRateTableIndex + i - 1].
+ temp = XGI330_RefIndex[RefreshRateTableIndex + i - 1].
Ext_InfoFlag;
if (temp & InterlaceMode)
i++;
@@ -6272,7 +5872,7 @@
unsigned short RefreshRateTableIndex, temp;
XGI_SetSeqRegs(ModeNo, ModeIdIndex, pVBInfo);
- outb(pVBInfo->StandTable->MISC, pVBInfo->P3c2);
+ outb(XGI330_StandTable.MISC, pVBInfo->P3c2);
XGI_SetCRTCRegs(HwDeviceExtension, pVBInfo);
XGI_SetATTRegs(ModeNo, ModeIdIndex, pVBInfo);
XGI_SetGRCRegs(pVBInfo);
@@ -6458,7 +6058,7 @@
pVBInfo))
return 0;
- pVBInfo->ModeType = pVBInfo->EModeIDTable[ModeIdIndex].
+ pVBInfo->ModeType = XGI330_EModeIDTable[ModeIdIndex].
Ext_ModeFlag & ModeTypeMask;
pVBInfo->SetFlag = 0;
diff --git a/drivers/staging/xgifb/vb_struct.h b/drivers/staging/xgifb/vb_struct.h
index 70158c2..acf6e7f 100644
--- a/drivers/staging/xgifb/vb_struct.h
+++ b/drivers/staging/xgifb/vb_struct.h
@@ -56,7 +56,7 @@
unsigned char PANELID;
unsigned short MASK;
unsigned short CAP;
- unsigned short DATAPTR;
+ void const *DATAPTR;
};
struct XGI330_TVDataTablStruct {
@@ -158,40 +158,18 @@
void __iomem *FBAddr;
unsigned long BaseAddr;
- unsigned char (*CR6B)[4];
- unsigned char (*CR6E)[4];
- unsigned char (*CR6F)[32];
- unsigned char (*CR89)[2];
+ unsigned char const (*SR15)[8];
+ unsigned char const (*CR40)[8];
- unsigned char (*SR15)[8];
- unsigned char (*CR40)[8];
+ struct SiS_MCLKData const *MCLKData;
- unsigned char *AGPReg;
- unsigned char *SR16;
- unsigned char SR21;
- unsigned char SR22;
- unsigned char SR25;
- struct SiS_MCLKData *MCLKData;
- struct XGI_ECLKDataStruct *ECLKData;
-
- unsigned char *ScreenOffset;
unsigned char *pXGINew_DRAMTypeDefinition;
unsigned char XGINew_CR97;
- struct XGI330_LCDCapStruct *LCDCapList;
+ struct XGI330_LCDCapStruct const *LCDCapList;
- struct XGI_TimingHStruct *TimingH;
- struct XGI_TimingVStruct *TimingV;
-
- struct SiS_StandTable_S *StandTable;
- struct XGI_ExtStruct *EModeIDTable;
- struct XGI_Ext2Struct *RefIndex;
- struct XGI_CRT1TableStruct *XGINEWUB_CRT1Table;
- struct SiS_VCLKData *VCLKData;
- struct SiS_VBVCLKData *VBVCLKData;
- struct SiS_StResInfo_S *StResInfo;
- struct SiS_ModeResInfo_S *ModeResInfo;
- struct XGI_XG21CRT1Struct *UpdateCRT1;
+ struct XGI_TimingHStruct TimingH;
+ struct XGI_TimingVStruct TimingV;
int ram_type;
int ram_channel;
diff --git a/drivers/staging/xgifb/vb_table.h b/drivers/staging/xgifb/vb_table.h
index 180aae0..39f528b 100644
--- a/drivers/staging/xgifb/vb_table.h
+++ b/drivers/staging/xgifb/vb_table.h
@@ -1,6 +1,6 @@
#ifndef _VB_TABLE_
#define _VB_TABLE_
-static struct SiS_MCLKData XGI340New_MCLKData[] = {
+static const struct SiS_MCLKData XGI340New_MCLKData[] = {
{0x16, 0x01, 0x01, 166},
{0x19, 0x02, 0x01, 124},
{0x7C, 0x08, 0x01, 200},
@@ -11,7 +11,7 @@
{0x5c, 0x23, 0x01, 166}
};
-static struct SiS_MCLKData XGI27New_MCLKData[] = {
+static const struct SiS_MCLKData XGI27New_MCLKData[] = {
{0x5c, 0x23, 0x01, 166},
{0x19, 0x02, 0x01, 124},
{0x7C, 0x08, 0x80, 200},
@@ -22,7 +22,7 @@
{0x5c, 0x23, 0x01, 166}
};
-static struct XGI_ECLKDataStruct XGI340_ECLKData[] = {
+const struct XGI_ECLKDataStruct XGI340_ECLKData[] = {
{0x5c, 0x23, 0x01, 166},
{0x55, 0x84, 0x01, 123},
{0x7C, 0x08, 0x01, 200},
@@ -33,21 +33,21 @@
{0x5c, 0x23, 0x01, 166}
};
-static unsigned char XG27_SR13[4][8] = {
+static const unsigned char XG27_SR13[4][8] = {
{0x35, 0x45, 0xb1, 0x00, 0x00, 0x00, 0x00, 0x00}, /* SR13 */
{0x41, 0x51, 0x5c, 0x00, 0x00, 0x00, 0x00, 0x00}, /* SR14 */
{0x32, 0x32, 0x42, 0x00, 0x00, 0x00, 0x00, 0x00}, /* SR18 */
{0x03, 0x03, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00} /* SR1B */
};
-static unsigned char XGI340_SR13[4][8] = {
+static const unsigned char XGI340_SR13[4][8] = {
{0x35, 0x45, 0xb1, 0x00, 0x00, 0x00, 0x00, 0x00}, /* SR13 */
{0x41, 0x51, 0x5c, 0x00, 0x00, 0x00, 0x00, 0x00}, /* SR14 */
{0x31, 0x42, 0x42, 0x00, 0x00, 0x00, 0x00, 0x00}, /* SR18 */
{0x03, 0x03, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00} /* SR1B */
};
-static unsigned char XGI340_cr41[24][8] = {
+static const unsigned char XGI340_cr41[24][8] = {
{0x20, 0x50, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00}, /* 0 CR41 */
{0xc4, 0x40, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00}, /* 1 CR8A */
{0xc4, 0x40, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00}, /* 2 CR8B */
@@ -74,7 +74,7 @@
{0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00} /* 23 CRC5 */
};
-static unsigned char XGI27_cr41[24][8] = {
+static const unsigned char XGI27_cr41[24][8] = {
{0x20, 0x40, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00}, /* 0 CR41 */
{0xC4, 0x40, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00}, /* 1 CR8A */
{0xC4, 0x40, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00}, /* 2 CR8B */
@@ -103,7 +103,7 @@
{0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00} /* 23 CRC5 */
};
-static unsigned char XGI340_CR6B[8][4] = {
+const unsigned char XGI340_CR6B[8][4] = {
{0xaa, 0xaa, 0xaa, 0xaa},
{0xaa, 0xaa, 0xaa, 0xaa},
{0xaa, 0xaa, 0xaa, 0xaa},
@@ -114,21 +114,13 @@
{0x00, 0x00, 0x00, 0x00}
};
-static unsigned char XGI340_CR6E[8][4];
-
-static unsigned char XGI340_CR6F[8][32];
-
-static unsigned char XGI340_CR89[8][2];
-
/* CR47,CR48,CR49,CR4A,CR4B,CR4C,CR70,CR71,CR74,CR75,CR76,CR77 */
-static unsigned char XGI340_AGPReg[12] = {
+const unsigned char XGI340_AGPReg[12] = {
0x28, 0x23, 0x00, 0x20, 0x00, 0x20,
0x00, 0x05, 0xd0, 0x10, 0x10, 0x00
};
-static unsigned char XGI340_SR16[4] = {0x03, 0x83, 0x03, 0x83};
-
-static struct XGI_ExtStruct XGI330_EModeIDTable[] = {
+const struct XGI_ExtStruct XGI330_EModeIDTable[] = {
{0x2e, 0x0a1b, 0x0306, 0x06, 0x05, 0x06},
{0x2f, 0x0a1b, 0x0305, 0x05, 0x05, 0x05},
{0x30, 0x2a1b, 0x0407, 0x07, 0x07, 0x0e},
@@ -200,7 +192,7 @@
{0xff, 0x0000, 0x0000, 0x00, 0x00, 0x00}
};
-static struct SiS_StandTable_S XGI330_StandTable = {
+static const struct SiS_StandTable_S XGI330_StandTable = {
/* ExtVGATable */
0x00, 0x00, 0x00, 0x0000,
{0x01, 0x0f, 0x00, 0x0e},
@@ -216,11 +208,7 @@
0xff}
};
-static struct XGI_TimingHStruct XGI_TimingH[1];
-
-static struct XGI_TimingVStruct XGI_TimingV[1];
-
-static struct XGI_XG21CRT1Struct XGI_UpdateCRT1Table[] = {
+static const struct XGI_XG21CRT1Struct XGI_UpdateCRT1Table[] = {
{0x01, 0x27, 0x91, 0x8f, 0xc0}, /* 00 */
{0x03, 0x4f, 0x83, 0x8f, 0xc0}, /* 01 */
{0x05, 0x27, 0x91, 0x8f, 0xc0}, /* 02 */
@@ -240,7 +228,7 @@
{0x59, 0x27, 0x91, 0x8f, 0xc0} /* 16 */
};
-static struct XGI_CRT1TableStruct XGI_CRT1Table[] = {
+const struct XGI_CRT1TableStruct XGI_CRT1Table[] = {
{ {0x2d, 0x28, 0x90, 0x2c, 0x90, 0x00, 0x04, 0x00,
0xbf, 0x1f, 0x9c, 0x8e, 0x96, 0xb9, 0x30} }, /* 0x0 */
{ {0x2d, 0x28, 0x90, 0x2c, 0x90, 0x00, 0x04, 0x00,
@@ -404,7 +392,7 @@
};
/*add for new UNIVGABIOS*/
-static struct SiS_LCDData XGI_StLCD1024x768Data[] = {
+static const struct SiS_LCDData XGI_StLCD1024x768Data[] = {
{62, 25, 800, 546, 1344, 806},
{32, 15, 930, 546, 1344, 806},
{62, 25, 800, 546, 1344, 806}, /*chiawenfordot9->dot8*/
@@ -414,7 +402,7 @@
{1, 1, 1344, 806, 1344, 806}
};
-static struct SiS_LCDData XGI_ExtLCD1024x768Data[] = {
+static const struct SiS_LCDData XGI_ExtLCD1024x768Data[] = {
{42, 25, 1536, 419, 1344, 806},
{48, 25, 1536, 369, 1344, 806},
{42, 25, 1536, 419, 1344, 806},
@@ -430,7 +418,7 @@
{1, 1, 1344, 806, 1344, 806}
};
-static struct SiS_LCDData XGI_CetLCD1024x768Data[] = {
+static const struct SiS_LCDData XGI_CetLCD1024x768Data[] = {
{1, 1, 1344, 806, 1344, 806}, /* ; 00 (320x200,320x400,
640x200,640x400) */
{1, 1, 1344, 806, 1344, 806}, /* 01 (320x350,640x350) */
@@ -441,7 +429,7 @@
{1, 1, 1344, 806, 1344, 806} /* 06 (1024x768x60Hz) */
};
-static struct SiS_LCDData XGI_StLCD1280x1024Data[] = {
+static const struct SiS_LCDData XGI_StLCD1280x1024Data[] = {
{22, 5, 800, 510, 1650, 1088},
{22, 5, 800, 510, 1650, 1088},
{176, 45, 900, 510, 1650, 1088},
@@ -452,7 +440,7 @@
{1, 1, 1688, 1066, 1688, 1066}
};
-static struct SiS_LCDData XGI_ExtLCD1280x1024Data[] = {
+static const struct SiS_LCDData XGI_ExtLCD1280x1024Data[] = {
{211, 60, 1024, 501, 1688, 1066},
{211, 60, 1024, 508, 1688, 1066},
{211, 60, 1024, 501, 1688, 1066},
@@ -463,7 +451,7 @@
{1, 1, 1688, 1066, 1688, 1066}
};
-static struct SiS_LCDData XGI_CetLCD1280x1024Data[] = {
+static const struct SiS_LCDData XGI_CetLCD1280x1024Data[] = {
{1, 1, 1688, 1066, 1688, 1066}, /* 00 (320x200,320x400,
640x200,640x400) */
{1, 1, 1688, 1066, 1688, 1066}, /* 01 (320x350,640x350) */
@@ -476,7 +464,7 @@
{1, 1, 1688, 1066, 1688, 1066} /* 08 (1400x1050x60Hz) */
};
-static struct SiS_LCDData xgifb_lcd_1400x1050[] = {
+static const struct SiS_LCDData xgifb_lcd_1400x1050[] = {
{211, 100, 2100, 408, 1688, 1066}, /* 00 (320x200,320x400,
640x200,640x400) */
{211, 64, 1536, 358, 1688, 1066}, /* 01 (320x350,640x350) */
@@ -490,7 +478,7 @@
{1, 1, 1688, 1066, 1688, 1066} /* 08 (1400x1050x60Hz) */
};
-static struct SiS_LCDData XGI_ExtLCD1600x1200Data[] = {
+static const struct SiS_LCDData XGI_ExtLCD1600x1200Data[] = {
{4, 1, 1620, 420, 2160, 1250}, /* 00 (320x200,320x400,
640x200,640x400)*/
{27, 7, 1920, 375, 2160, 1250}, /* 01 (320x350,640x350) */
@@ -504,7 +492,7 @@
{1, 1, 2160, 1250, 2160, 1250} /* 09 (1600x1200x60Hz) ;302lv */
};
-static struct SiS_LCDData XGI_StLCD1600x1200Data[] = {
+static const struct SiS_LCDData XGI_StLCD1600x1200Data[] = {
{27, 4, 800, 500, 2160, 1250}, /* 00 (320x200,320x400,
640x200,640x400) */
{27, 4, 800, 500, 2160, 1250}, /* 01 (320x350,640x350) */
@@ -520,7 +508,7 @@
#define XGI_CetLCD1400x1050Data XGI_CetLCD1280x1024Data
-static struct SiS_LCDData XGI_NoScalingData[] = {
+static const struct SiS_LCDData XGI_NoScalingData[] = {
{1, 1, 800, 449, 800, 449},
{1, 1, 800, 449, 800, 449},
{1, 1, 900, 449, 900, 449},
@@ -531,7 +519,7 @@
{1, 1, 1688, 1066, 1688, 1066}
};
-static struct SiS_LCDData XGI_ExtLCD1024x768x75Data[] = {
+static const struct SiS_LCDData XGI_ExtLCD1024x768x75Data[] = {
{42, 25, 1536, 419, 1344, 806}, /* ; 00 (320x200,320x400,
640x200,640x400) */
{48, 25, 1536, 369, 1344, 806}, /* ; 01 (320x350,640x350) */
@@ -542,7 +530,7 @@
{1, 1, 1312, 800, 1312, 800} /* ; 06 (1024x768x75Hz) */
};
-static struct SiS_LCDData XGI_CetLCD1024x768x75Data[] = {
+static const struct SiS_LCDData XGI_CetLCD1024x768x75Data[] = {
{1, 1, 1312, 800, 1312, 800}, /* ; 00 (320x200,320x400,
640x200,640x400) */
{1, 1, 1312, 800, 1312, 800}, /* ; 01 (320x350,640x350) */
@@ -553,7 +541,7 @@
{1, 1, 1312, 800, 1312, 800} /* ; 06 (1024x768x75Hz) */
};
-static struct SiS_LCDData xgifb_lcd_1280x1024x75[] = {
+static const struct SiS_LCDData xgifb_lcd_1280x1024x75[] = {
{211, 60, 1024, 501, 1688, 1066}, /* ; 00 (320x200,320x400,
640x200,640x400) */
{211, 60, 1024, 508, 1688, 1066}, /* ; 01 (320x350,640x350) */
@@ -567,7 +555,7 @@
#define XGI_CetLCD1280x1024x75Data XGI_CetLCD1280x1024Data
-static struct SiS_LCDData XGI_NoScalingDatax75[] = {
+static const struct SiS_LCDData XGI_NoScalingDatax75[] = {
{1, 1, 800, 449, 800, 449}, /* ; 00 (320x200, 320x400,
640x200, 640x400) */
{1, 1, 800, 449, 800, 449}, /* ; 01 (320x350, 640x350) */
@@ -582,7 +570,7 @@
{1, 1, 1688, 806, 1688, 806} /* ; 0A (1280x768x75Hz) */
};
-static struct XGI_LCDDesStruct XGI_ExtLCDDes1024x768Data[] = {
+static const struct XGI_LCDDesStruct XGI_ExtLCDDes1024x768Data[] = {
{9, 1057, 0, 771}, /* ; 00 (320x200,320x400,640x200,640x400) */
{9, 1057, 0, 771}, /* ; 01 (320x350,640x350) */
{9, 1057, 0, 771}, /* ; 02 (360x400,720x400) */
@@ -592,7 +580,7 @@
{9, 1057, 805, 770} /* ; 06 (1024x768x60Hz) */
};
-static struct XGI_LCDDesStruct XGI_StLCDDes1024x768Data[] = {
+static const struct XGI_LCDDesStruct XGI_StLCDDes1024x768Data[] = {
{9, 1057, 737, 703}, /* ; 00 (320x200,320x400,640x200,640x400) */
{9, 1057, 686, 651}, /* ; 01 (320x350,640x350) */
{9, 1057, 737, 703}, /* ; 02 (360x400,720x400) */
@@ -602,7 +590,7 @@
{9, 1057, 805, 770} /* ; 06 (1024x768x60Hz) */
};
-static struct XGI_LCDDesStruct XGI_CetLCDDes1024x768Data[] = {
+static const struct XGI_LCDDesStruct XGI_CetLCDDes1024x768Data[] = {
{1152, 856, 622, 587}, /* ; 00 (320x200,320x400,640x200,640x400) */
{1152, 856, 597, 562}, /* ; 01 (320x350,640x350) */
{1152, 856, 622, 587}, /* ; 02 (360x400,720x400) */
@@ -612,7 +600,7 @@
{0, 1048, 805, 770} /* ; 06 (1024x768x60Hz) */
};
-static struct XGI_LCDDesStruct XGI_ExtLCDDLDes1280x1024Data[] = {
+static const struct XGI_LCDDesStruct XGI_ExtLCDDLDes1280x1024Data[] = {
{18, 1346, 981, 940}, /* 00 (320x200,320x400,640x200,640x400) */
{18, 1346, 926, 865}, /* 01 (320x350,640x350) */
{18, 1346, 981, 940}, /* 02 (360x400,720x400) */
@@ -623,7 +611,7 @@
{18, 1346, 1065, 1024} /* 07 (1280x1024x60Hz) */
};
-static struct XGI_LCDDesStruct XGI_StLCDDLDes1280x1024Data[] = {
+static const struct XGI_LCDDesStruct XGI_StLCDDLDes1280x1024Data[] = {
{18, 1346, 970, 907}, /* 00 (320x200,320x400,640x200,640x400) */
{18, 1346, 917, 854}, /* 01 (320x350,640x350) */
{18, 1346, 970, 907}, /* 02 (360x400,720x400) */
@@ -634,7 +622,7 @@
{18, 1346, 1065, 1024} /* 07 (1280x1024x60Hz) */
};
-static struct XGI_LCDDesStruct XGI_CetLCDDLDes1280x1024Data[] = {
+static const struct XGI_LCDDesStruct XGI_CetLCDDLDes1280x1024Data[] = {
{1368, 1008, 752, 711}, /* 00 (320x200,320x400,640x200,640x400) */
{1368, 1008, 729, 688}, /* 01 (320x350,640x350) */
{1368, 1008, 752, 711}, /* 02 (360x400,720x400) */
@@ -645,7 +633,7 @@
{18, 1346, 1065, 1024} /* 07 (1280x1024x60Hz) */
};
-static struct XGI_LCDDesStruct XGI_ExtLCDDes1280x1024Data[] = {
+static const struct XGI_LCDDesStruct XGI_ExtLCDDes1280x1024Data[] = {
{9, 1337, 981, 940}, /* ; 00 (320x200,320x400,640x200,640x400) */
{9, 1337, 926, 884}, /* ; 01 (320x350,640x350) alan, 2003/09/30 */
{9, 1337, 981, 940}, /* ; 02 (360x400,720x400) */
@@ -656,7 +644,7 @@
{9, 1337, 1065, 1024} /* ; 07 (1280x1024x60Hz) */
};
-static struct XGI_LCDDesStruct XGI_StLCDDes1280x1024Data[] = {
+static const struct XGI_LCDDesStruct XGI_StLCDDes1280x1024Data[] = {
{9, 1337, 970, 907}, /* ; 00 (320x200,320x400,640x200,640x400) */
{9, 1337, 917, 854}, /* ; 01 (320x350,640x350) */
{9, 1337, 970, 907}, /* ; 02 (360x400,720x400) */
@@ -667,7 +655,7 @@
{9, 1337, 1065, 1024} /* ; 07 (1280x1024x60Hz) */
};
-static struct XGI_LCDDesStruct XGI_CetLCDDes1280x1024Data[] = {
+static const struct XGI_LCDDesStruct XGI_CetLCDDes1280x1024Data[] = {
{1368, 1008, 752, 711}, /* 00 (320x200,320x400,640x200,640x400) */
{1368, 1008, 729, 688}, /* 01 (320x350,640x350) */
{1368, 1008, 752, 711}, /* 02 (360x400,720x400) */
@@ -678,7 +666,7 @@
{9, 1337, 1065, 1024} /* 07 (1280x1024x60Hz) */
};
-static struct XGI_LCDDesStruct xgifb_lcddldes_1400x1050[] = {
+static const struct XGI_LCDDesStruct xgifb_lcddldes_1400x1050[] = {
{18, 1464, 0, 1051}, /* 00 (320x200,320x400,640x200,640x400) */
{18, 1464, 0, 1051}, /* 01 (320x350,640x350) */
{18, 1464, 0, 1051}, /* 02 (360x400,720x400) */
@@ -690,7 +678,7 @@
{18, 1464, 0, 1051} /* 08 (1400x1050x60Hz) */
};
-static struct XGI_LCDDesStruct xgifb_lcddes_1400x1050[] = {
+static const struct XGI_LCDDesStruct xgifb_lcddes_1400x1050[] = {
{9, 1455, 0, 1051}, /* 00 (320x200,320x400,640x200,640x400) */
{9, 1455, 0, 1051}, /* 01 (320x350,640x350) */
{9, 1455, 0, 1051}, /* 02 (360x400,720x400) */
@@ -702,7 +690,7 @@
{9, 1455, 0, 1051} /* 08 (1400x1050x60Hz) */
};
-static struct XGI_LCDDesStruct XGI_CetLCDDes1400x1050Data[] = {
+static const struct XGI_LCDDesStruct XGI_CetLCDDes1400x1050Data[] = {
{1308, 1068, 781, 766}, /* 00 (320x200,320x400,640x200,640x400) */
{1308, 1068, 781, 766}, /* 01 (320x350,640x350) */
{1308, 1068, 781, 766}, /* 02 (360x400,720x400) */
@@ -714,7 +702,7 @@
{18, 1464, 0, 1051} /* 08 (1400x1050x60Hz) */
};
-static struct XGI_LCDDesStruct XGI_CetLCDDes1400x1050Data2[] = {
+static const struct XGI_LCDDesStruct XGI_CetLCDDes1400x1050Data2[] = {
{0, 1448, 0, 1051}, /* 00 (320x200,320x400,640x200,640x400) */
{0, 1448, 0, 1051}, /* 01 (320x350,640x350) */
{0, 1448, 0, 1051}, /* 02 (360x400,720x400) */
@@ -722,7 +710,7 @@
{0, 1448, 0, 1051} /* 04 (640x480x60Hz) */
};
-static struct XGI_LCDDesStruct XGI_ExtLCDDLDes1600x1200Data[] = {
+static const struct XGI_LCDDesStruct XGI_ExtLCDDLDes1600x1200Data[] = {
{18, 1682, 0, 1201}, /* 00 (320x200,320x400,640x200,640x400) */
{18, 1682, 0, 1201}, /* 01 (320x350,640x350) */
{18, 1682, 0, 1201}, /* 02 (360x400,720x400) */
@@ -735,7 +723,7 @@
{18, 1682, 0, 1201} /* 09 (1600x1200x60Hz) */
};
-static struct XGI_LCDDesStruct XGI_StLCDDLDes1600x1200Data[] = {
+static const struct XGI_LCDDesStruct XGI_StLCDDLDes1600x1200Data[] = {
{18, 1682, 1150, 1101}, /* 00 (320x200,320x400,640x200,640x400) */
{18, 1682, 1083, 1034}, /* 01 (320x350,640x350) */
{18, 1682, 1150, 1101}, /* 02 (360x400,720x400) */
@@ -748,7 +736,7 @@
{18, 1682, 0, 1201} /* 09 (1600x1200x60Hz) */
};
-static struct XGI_LCDDesStruct XGI_ExtLCDDes1600x1200Data[] = {
+static const struct XGI_LCDDesStruct XGI_ExtLCDDes1600x1200Data[] = {
{9, 1673, 0, 1201}, /* 00 (320x200,320x400,640x200,640x400) */
{9, 1673, 0, 1201}, /* 01 (320x350,640x350) */
{9, 1673, 0, 1201}, /* 02 (360x400,720x400) */
@@ -761,7 +749,7 @@
{9, 1673, 0, 1201} /* 09 (1600x1200x60Hz) */
};
-static struct XGI_LCDDesStruct XGI_StLCDDes1600x1200Data[] = {
+static const struct XGI_LCDDesStruct XGI_StLCDDes1600x1200Data[] = {
{9, 1673, 1150, 1101}, /* 00 (320x200,320x400,640x200,640x400) */
{9, 1673, 1083, 1034}, /* 01 (320x350,640x350) */
{9, 1673, 1150, 1101}, /* 02 (360x400,720x400) */
@@ -774,7 +762,7 @@
{9, 1673, 0, 1201} /* 09 (1600x1200x60Hz) */
};
-static struct XGI330_LCDDataDesStruct2 XGI_NoScalingDesData[] = {
+static const struct XGI330_LCDDataDesStruct2 XGI_NoScalingDesData[] = {
{9, 657, 448, 405, 96, 2}, /* 00 (320x200,320x400,
640x200,640x400) */
{9, 657, 448, 355, 96, 2}, /* 01 (320x350,640x350) */
@@ -790,7 +778,7 @@
};
/* ;;1024x768x75Hz */
-static struct XGI_LCDDesStruct xgifb_lcddes_1024x768x75[] = {
+static const struct XGI_LCDDesStruct xgifb_lcddes_1024x768x75[] = {
{9, 1049, 0, 769}, /* ; 00 (320x200,320x400,640x200,640x400) */
{9, 1049, 0, 769}, /* ; 01 (320x350,640x350) */
{9, 1049, 0, 769}, /* ; 02 (360x400,720x400) */
@@ -801,7 +789,7 @@
};
/* ;;1024x768x75Hz */
-static struct XGI_LCDDesStruct XGI_CetLCDDes1024x768x75Data[] = {
+static const struct XGI_LCDDesStruct XGI_CetLCDDes1024x768x75Data[] = {
{1152, 856, 622, 587}, /* ; 00 (320x200,320x400,640x200,640x400) */
{1152, 856, 597, 562}, /* ; 01 (320x350,640x350) */
{1192, 896, 622, 587}, /* ; 02 (360x400,720x400) */
@@ -812,7 +800,7 @@
};
/* ;;1280x1024x75Hz */
-static struct XGI_LCDDesStruct xgifb_lcddldes_1280x1024x75[] = {
+static const struct XGI_LCDDesStruct xgifb_lcddldes_1280x1024x75[] = {
{18, 1314, 0, 1025}, /* ; 00 (320x200,320x400,640x200,640x400) */
{18, 1314, 0, 1025}, /* ; 01 (320x350,640x350) */
{18, 1314, 0, 1025}, /* ; 02 (360x400,720x400) */
@@ -824,7 +812,7 @@
};
/* 1280x1024x75Hz */
-static struct XGI_LCDDesStruct XGI_CetLCDDLDes1280x1024x75Data[] = {
+static const struct XGI_LCDDesStruct XGI_CetLCDDLDes1280x1024x75Data[] = {
{1368, 1008, 752, 711}, /* ; 00 (320x200,320x400,640x200,640x400) */
{1368, 1008, 729, 688}, /* ; 01 (320x350,640x350) */
{1408, 1048, 752, 711}, /* ; 02 (360x400,720x400) */
@@ -836,7 +824,7 @@
};
/* ;;1280x1024x75Hz */
-static struct XGI_LCDDesStruct xgifb_lcddes_1280x1024x75[] = {
+static const struct XGI_LCDDesStruct xgifb_lcddes_1280x1024x75[] = {
{9, 1305, 0, 1025}, /* ; 00 (320x200,320x400,640x200,640x400) */
{9, 1305, 0, 1025}, /* ; 01 (320x350,640x350) */
{9, 1305, 0, 1025}, /* ; 02 (360x400,720x400) */
@@ -848,7 +836,7 @@
};
/* 1280x1024x75Hz */
-static struct XGI_LCDDesStruct XGI_CetLCDDes1280x1024x75Data[] = {
+static const struct XGI_LCDDesStruct XGI_CetLCDDes1280x1024x75Data[] = {
{1368, 1008, 752, 711}, /* ; 00 (320x200,320x400,640x200,640x400) */
{1368, 1008, 729, 688}, /* ; 01 (320x350,640x350) */
{1408, 1048, 752, 711}, /* ; 02 (360x400,720x400) */
@@ -860,7 +848,7 @@
};
/* Scaling LCD 75Hz */
-static struct XGI330_LCDDataDesStruct2 XGI_NoScalingDesDatax75[] = {
+static const struct XGI330_LCDDataDesStruct2 XGI_NoScalingDesDatax75[] = {
{9, 657, 448, 405, 96, 2}, /* ; 00 (320x200,320x400,
640x200,640x400) */
{9, 657, 448, 355, 96, 2}, /* ; 01 (320x350,640x350) */
@@ -1174,7 +1162,7 @@
0x18, 0x1D, 0x23, 0x28, 0x4C, 0xAA, 0x01
};
-static struct SiS_LVDSData XGI_LVDS1024x768Data_1[] = {
+static const struct SiS_LVDSData XGI_LVDS1024x768Data_1[] = {
{ 960, 438, 1344, 806}, /* 00 (320x200,320x400,640x200,640x400) */
{ 960, 388, 1344, 806}, /* 01 (320x350,640x350) */
{1040, 438, 1344, 806}, /* 02 (360x400,720x400) */
@@ -1185,7 +1173,7 @@
};
-static struct SiS_LVDSData XGI_LVDS1024x768Data_2[] = {
+static const struct SiS_LVDSData XGI_LVDS1024x768Data_2[] = {
{1344, 806, 1344, 806},
{1344, 806, 1344, 806},
{1344, 806, 1344, 806},
@@ -1197,7 +1185,7 @@
{800, 525, 1280, 813}
};
-static struct SiS_LVDSData XGI_LVDS1280x1024Data_1[] = {
+static const struct SiS_LVDSData XGI_LVDS1280x1024Data_1[] = {
{1048, 442, 1688, 1066},
{1048, 392, 1688, 1066},
{1048, 442, 1688, 1066},
@@ -1210,7 +1198,7 @@
#define XGI_LVDS1280x1024Data_2 XGI_LVDS1024x768Data_2
-static struct SiS_LVDSData XGI_LVDS1400x1050Data_1[] = {
+static const struct SiS_LVDSData XGI_LVDS1400x1050Data_1[] = {
{928, 416, 1688, 1066},
{928, 366, 1688, 1066},
{928, 416, 1688, 1066},
@@ -1222,7 +1210,7 @@
{1688, 1066, 1688, 1066}
};
-static struct SiS_LVDSData XGI_LVDS1400x1050Data_2[] = {
+static const struct SiS_LVDSData XGI_LVDS1400x1050Data_2[] = {
{1688, 1066, 1688, 1066},
{1688, 1066, 1688, 1066},
{1688, 1066, 1688, 1066},
@@ -1235,7 +1223,7 @@
};
/* ;;[ycchen] 12/05/02 LCDHTxLCDVT=2048x1320 */
-static struct SiS_LVDSData XGI_LVDS1600x1200Data_1[] = {
+static const struct SiS_LVDSData XGI_LVDS1600x1200Data_1[] = {
{1088, 520, 2048, 1320}, /* 00 (320x200,320x400,640x200,640x400) */
{1088, 470, 2048, 1320}, /* 01 (320x350,640x350) */
{1088, 520, 2048, 1320}, /* 02 (360x400,720x400) */
@@ -1248,7 +1236,7 @@
{2048, 1320, 2048, 1320} /* 09 (1600x1200) */
};
-static struct SiS_LVDSData XGI_LVDSNoScalingData[] = {
+static const struct SiS_LVDSData XGI_LVDSNoScalingData[] = {
{ 800, 449, 800, 449}, /* 00 (320x200,320x400,640x200,640x400) */
{ 800, 449, 800, 449}, /* 01 (320x350,640x350) */
{ 800, 449, 800, 449}, /* 02 (360x400,720x400) */
@@ -1262,7 +1250,7 @@
{1688, 806, 1688, 806} /* 0A (1280x768x60Hz) */
};
-static struct SiS_LVDSData XGI_LVDS1024x768Data_1x75[] = {
+static const struct SiS_LVDSData XGI_LVDS1024x768Data_1x75[] = {
{ 960, 438, 1312, 800}, /* 00 (320x200,320x400,640x200,640x400) */
{ 960, 388, 1312, 800}, /* 01 (320x350,640x350) */
{1040, 438, 1312, 800}, /* 02 (360x400,720x400) */
@@ -1273,7 +1261,7 @@
};
-static struct SiS_LVDSData XGI_LVDS1024x768Data_2x75[] = {
+static const struct SiS_LVDSData XGI_LVDS1024x768Data_2x75[] = {
{1312, 800, 1312, 800}, /* ; 00 (320x200,320x400,640x200,640x400) */
{1312, 800, 1312, 800}, /* ; 01 (320x350,640x350) */
{1312, 800, 1312, 800}, /* ; 02 (360x400,720x400) */
@@ -1283,7 +1271,7 @@
{1312, 800, 1312, 800}, /* ; 06 (512x384,1024x768) */
};
-static struct SiS_LVDSData XGI_LVDS1280x1024Data_1x75[] = {
+static const struct SiS_LVDSData XGI_LVDS1280x1024Data_1x75[] = {
{1048, 442, 1688, 1066 }, /* ; 00 (320x200,320x400,640x200,640x400) */
{1048, 392, 1688, 1066 }, /* ; 01 (320x350,640x350) */
{1128, 442, 1688, 1066 }, /* ; 02 (360x400,720x400) */
@@ -1294,7 +1282,7 @@
{1688, 1066, 1688, 1066 }, /* ; 06; 07 (640x512,1280x1024) */
};
-static struct SiS_LVDSData XGI_LVDS1280x1024Data_2x75[] = {
+static const struct SiS_LVDSData XGI_LVDS1280x1024Data_2x75[] = {
{1688, 1066, 1688, 1066 }, /* ; 00 (320x200,320x400,640x200,640x400) */
{1688, 1066, 1688, 1066 }, /* ; 01 (320x350,640x350) */
{1688, 1066, 1688, 1066 }, /* ; 02 (360x400,720x400) */
@@ -1305,7 +1293,7 @@
{1688, 1066, 1688, 1066 }, /* ; 06; 07 (640x512,1280x1024) */
};
-static struct SiS_LVDSData XGI_LVDSNoScalingDatax75[] = {
+static const struct SiS_LVDSData XGI_LVDSNoScalingDatax75[] = {
{ 800, 449, 800, 449}, /* ; 00 (320x200,320x400,640x200,640x400) */
{ 800, 449, 800, 449}, /* ; 01 (320x350,640x350) */
{ 900, 449, 900, 449}, /* ; 02 (360x400,720x400) */
@@ -1320,7 +1308,7 @@
{1688, 806, 1688, 806}, /* ; 0A (1280x768x75Hz) */
};
-static struct SiS_LVDSData XGI_LVDS1024x768Des_1[] = {
+static const struct SiS_LVDSData XGI_LVDS1024x768Des_1[] = {
{0, 1048, 0, 771}, /* 00 (320x200,320x400,640x200,640x400) */
{0, 1048, 0, 771}, /* 01 (320x350,640x350) */
{0, 1048, 0, 771}, /* 02 (360x400,720x400) */
@@ -1330,7 +1318,7 @@
{0, 1048, 805, 770} /* 06 (1024x768x60Hz) */
} ;
-static struct SiS_LVDSData XGI_LVDS1024x768Des_2[] = {
+static const struct SiS_LVDSData XGI_LVDS1024x768Des_2[] = {
{1142, 856, 622, 587}, /* 00 (320x200,320x400,640x200,640x400) */
{1142, 856, 597, 562}, /* 01 (320x350,640x350) */
{1142, 856, 622, 587}, /* 02 (360x400,720x400) */
@@ -1340,7 +1328,7 @@
{ 0, 1048, 805, 771} /* 06 (1024x768x60Hz) */
};
-static struct SiS_LVDSData XGI_LVDS1024x768Des_3[] = {
+static const struct SiS_LVDSData XGI_LVDS1024x768Des_3[] = {
{320, 24, 622, 587}, /* 00 (320x200,320x400,640x200,640x400) */
{320, 24, 597, 562}, /* 01 (320x350,640x350) */
{320, 24, 622, 587}, /* 02 (360x400,720x400) */
@@ -1348,7 +1336,7 @@
{320, 24, 722, 687} /* 04 (640x480x60Hz) */
};
-static struct SiS_LVDSData XGI_LVDS1280x1024Des_1[] = {
+static const struct SiS_LVDSData XGI_LVDS1280x1024Des_1[] = {
{0, 1328, 0, 1025}, /* 00 (320x200,320x400,640x200,640x400) */
{0, 1328, 0, 1025}, /* 01 (320x350,640x350) */
{0, 1328, 0, 1025}, /* 02 (360x400,720x400) */
@@ -1360,7 +1348,7 @@
};
/* The Display setting for DE Mode Panel */
-static struct SiS_LVDSData XGI_LVDS1280x1024Des_2[] = {
+static const struct SiS_LVDSData XGI_LVDS1280x1024Des_2[] = {
{1368, 1008, 752, 711}, /* 00 (320x200,320x400,640x200,640x400) */
{1368, 1008, 729, 688}, /* 01 (320x350,640x350) */
{1408, 1048, 752, 711}, /* 02 (360x400,720x400) */
@@ -1371,7 +1359,7 @@
{0000, 1328, 0, 1025} /* 07 (1280x1024x60Hz) */
};
-static struct SiS_LVDSData XGI_LVDS1400x1050Des_1[] = {
+static const struct SiS_LVDSData XGI_LVDS1400x1050Des_1[] = {
{0, 1448, 0, 1051}, /* 00 (320x200,320x400,640x200,640x400) */
{0, 1448, 0, 1051}, /* 01 (320x350,640x350) */
{0, 1448, 0, 1051}, /* 02 (360x400,720x400) */
@@ -1383,7 +1371,7 @@
{0, 1448, 0, 1051} /* 08 (1400x1050x60Hz) */
};
-static struct SiS_LVDSData XGI_LVDS1400x1050Des_2[] = {
+static const struct SiS_LVDSData XGI_LVDS1400x1050Des_2[] = {
{1308, 1068, 781, 766}, /* 00 (320x200,320x400,640x200,640x400) */
{1308, 1068, 781, 766}, /* 01 (320x350,640x350) */
{1308, 1068, 781, 766}, /* 02 (360x400,720x400) */
@@ -1395,7 +1383,7 @@
{ 0, 1448, 0, 1051} /* 08 (1400x1050x60Hz) */
};
-static struct SiS_LVDSData XGI_LVDS1600x1200Des_1[] = {
+static const struct SiS_LVDSData XGI_LVDS1600x1200Des_1[] = {
{0, 1664, 0, 1201}, /* 00 (320x200,320x400,640x200,640x400) */
{0, 1664, 0, 1201}, /* 01 (320x350,640x350) */
{0, 1664, 0, 1201}, /* 02 (360x400,720x400) */
@@ -1408,7 +1396,7 @@
{0, 1664, 0, 1201} /* 09 (1600x1200x60Hz) */
};
-static struct XGI330_LCDDataDesStruct2 XGI_LVDSNoScalingDesData[] = {
+static const struct XGI330_LCDDataDesStruct2 XGI_LVDSNoScalingDesData[] = {
{0, 648, 448, 405, 96, 2}, /* 00 (320x200,320x400,
640x200,640x400) */
{0, 648, 448, 355, 96, 2}, /* 01 (320x350,640x350) */
@@ -1424,7 +1412,7 @@
};
/* ; 1024x768 Full-screen */
-static struct SiS_LVDSData XGI_LVDS1024x768Des_1x75[] = {
+static const struct SiS_LVDSData XGI_LVDS1024x768Des_1x75[] = {
{0, 1040, 0, 769}, /* ; 00 (320x200,320x400,640x200,640x400) */
{0, 1040, 0, 769}, /* ; 01 (320x350,640x350) */
{0, 1040, 0, 769}, /* ; 02 (360x400,720x400) */
@@ -1435,7 +1423,7 @@
};
/* ; 1024x768 center-screen (Enh. Mode) */
-static struct SiS_LVDSData XGI_LVDS1024x768Des_2x75[] = {
+static const struct SiS_LVDSData XGI_LVDS1024x768Des_2x75[] = {
{1142, 856, 622, 587}, /* 00 (320x200,320x400,640x200,640x400) */
{1142, 856, 597, 562}, /* 01 (320x350,640x350) */
{1142, 856, 622, 587}, /* 02 (360x400,720x400) */
@@ -1446,7 +1434,7 @@
};
/* ; 1024x768 center-screen (St.Mode) */
-static struct SiS_LVDSData XGI_LVDS1024x768Des_3x75[] = {
+static const struct SiS_LVDSData XGI_LVDS1024x768Des_3x75[] = {
{320, 24, 622, 587}, /* ; 00 (320x200,320x400,640x200,640x400) */
{320, 24, 597, 562}, /* ; 01 (320x350,640x350) */
{320, 24, 622, 587}, /* ; 02 (360x400,720x400) */
@@ -1454,7 +1442,7 @@
{320, 24, 722, 687} /* ; 04 (640x480x60Hz) */
};
-static struct SiS_LVDSData XGI_LVDS1280x1024Des_1x75[] = {
+static const struct SiS_LVDSData XGI_LVDS1280x1024Des_1x75[] = {
{0, 1296, 0, 1025}, /* ; 00 (320x200,320x400,640x200,640x400) */
{0, 1296, 0, 1025}, /* ; 01 (320x350,640x350) */
{0, 1296, 0, 1025}, /* ; 02 (360x400,720x400) */
@@ -1467,7 +1455,7 @@
/* The Display setting for DE Mode Panel */
/* Set DE as default */
-static struct SiS_LVDSData XGI_LVDS1280x1024Des_2x75[] = {
+static const struct SiS_LVDSData XGI_LVDS1280x1024Des_2x75[] = {
{1368, 976, 752, 711}, /* ; 00 (320x200,320x400,640x200,640x400) */
{1368, 976, 729, 688}, /* ; 01 (320x350,640x350) */
{1408, 976, 752, 711}, /* ; 02 (360x400,720x400) */
@@ -1479,7 +1467,7 @@
};
/* Scaling LCD 75Hz */
-static struct XGI330_LCDDataDesStruct2 XGI_LVDSNoScalingDesDatax75[] = {
+static const struct XGI330_LCDDataDesStruct2 XGI_LVDSNoScalingDesDatax75[] = {
{0, 648, 448, 405, 96, 2}, /* ; 00 (320x200,320x400,
640x200,640x400) */
{0, 648, 448, 355, 96, 2}, /* ; 01 (320x350,640x350) */
@@ -1495,7 +1483,7 @@
};
/* CR00,CR02,CR03,CR04,CR05,SR0B,SR0C,SR0E */
-static struct XGI_LVDSCRT1HDataStruct XGI_LVDSCRT11024x768_1_H[] = {
+static const struct XGI_LVDSCRT1HDataStruct XGI_LVDSCRT11024x768_1_H[] = {
{ {0x4B, 0x27, 0x8F, 0x32, 0x1B, 0x00, 0x45, 0x00} }, /* 00 (320x) */
{ {0x4B, 0x27, 0x8F, 0x2B, 0x03, 0x00, 0x44, 0x00} }, /* 01 (360x) */
{ {0x55, 0x31, 0x99, 0x46, 0x1D, 0x00, 0x55, 0x00} }, /* 02 (400x) */
@@ -1507,7 +1495,7 @@
};
/* CR00,CR02,CR03,CR04,CR05,SR0B,SR0C,SR0E */
-static struct XGI_LVDSCRT1HDataStruct XGI_LVDSCRT11280x1024_1_H[] = {
+static const struct XGI_LVDSCRT1HDataStruct XGI_LVDSCRT11280x1024_1_H[] = {
{ {0x56, 0x27, 0x9A, 0x30, 0x1E, 0x00, 0x05, 0x00 } }, /* 00 (320x) */
{ {0x56, 0x27, 0x9A, 0x30, 0x1E, 0x00, 0x05, 0x00 } }, /* 01 (360x) */
{ {0x60, 0x31, 0x84, 0x3A, 0x88, 0x00, 0x01, 0x00 } }, /* 02 (400x) */
@@ -1520,7 +1508,7 @@
};
/* CR00,CR02,CR03,CR04,CR05,SR0B,SR0C,SR0E */
-static struct XGI_LVDSCRT1HDataStruct XGI_LVDSCRT11024x768_2_H[] = {
+static const struct XGI_LVDSCRT1HDataStruct XGI_LVDSCRT11024x768_2_H[] = {
{ {0x63, 0x27, 0x87, 0x3B, 0x8C, 0x00, 0x01, 0x00} }, /* 00 (320x) */
{ {0x63, 0x27, 0x87, 0x3B, 0x8C, 0x00, 0x01, 0x00} }, /* 01 (360x) */
{ {0x63, 0x31, 0x87, 0x3D, 0x8E, 0x00, 0x01, 0x00} }, /* 02 (400x) */
@@ -1532,7 +1520,7 @@
};
/* CR00,CR02,CR03,CR04,CR05,SR0B,SR0C,SR0E */
-static struct XGI_LVDSCRT1HDataStruct XGI_LVDSCRT11280x1024_2_H[] = {
+static const struct XGI_LVDSCRT1HDataStruct XGI_LVDSCRT11280x1024_2_H[] = {
{ {0x7E, 0x3B, 0x9A, 0x44, 0x12, 0x00, 0x01, 0x00} }, /* 00 (320x) */
{ {0x7E, 0x3B, 0x9A, 0x44, 0x12, 0x00, 0x01, 0x00} }, /* 01 (360x) */
{ {0x7E, 0x40, 0x84, 0x49, 0x91, 0x00, 0x01, 0x00} }, /* 02 (400x) */
@@ -1545,7 +1533,7 @@
};
/* CR00,CR02,CR03,CR04,CR05,SR0B,SR0C,SR0E */
-static struct XGI_LVDSCRT1HDataStruct XGI_LVDSCRT11400x1050_1_H[] = {
+static const struct XGI_LVDSCRT1HDataStruct XGI_LVDSCRT11400x1050_1_H[] = {
{ {0x47, 0x27, 0x8B, 0x2C, 0x1A, 0x00, 0x05, 0x00} }, /* 00 (320x) */
{ {0x47, 0x27, 0x8B, 0x30, 0x1E, 0x00, 0x05, 0x00} }, /* 01 (360x) */
{ {0x51, 0x31, 0x95, 0x36, 0x04, 0x00, 0x01, 0x00} }, /* 02 (400x) */
@@ -1559,7 +1547,7 @@
};
/* CR00,CR02,CR03,CR04,CR05,SR0B,SR0C,SR0E */
-static struct XGI_LVDSCRT1HDataStruct XGI_LVDSCRT11400x1050_2_H[] = {
+static const struct XGI_LVDSCRT1HDataStruct XGI_LVDSCRT11400x1050_2_H[] = {
{ {0x76, 0x3F, 0x83, 0x45, 0x8C, 0x00, 0x41, 0x00} }, /* 00 (320x) */
{ {0x76, 0x3F, 0x83, 0x45, 0x8C, 0x00, 0x41, 0x00} }, /* 01 (360x) */
{ {0x76, 0x31, 0x9A, 0x48, 0x9F, 0x00, 0x41, 0x00} }, /* 02 (400x) */
@@ -1574,7 +1562,7 @@
/* ;302lv channelA [ycchen] 12/05/02 LCDHT=2048 */
/* ; CR00,CR02,CR03,CR04,CR05,SR0B,SR0C,SR0E */
-static struct XGI_LVDSCRT1HDataStruct XGI_LVDSCRT11600x1200_1_H[] = {
+static const struct XGI_LVDSCRT1HDataStruct XGI_LVDSCRT11600x1200_1_H[] = {
{ {0x5B, 0x27, 0x9F, 0x32, 0x0A, 0x00, 0x01, 0x00} }, /* 00 (320x) */
{ {0x5B, 0x27, 0x9F, 0x32, 0x0A, 0x00, 0x01, 0x00} }, /* 01 (360x) */
{ {0x65, 0x31, 0x89, 0x3C, 0x94, 0x00, 0x01, 0x00} }, /* 02 (400x) */
@@ -1589,7 +1577,7 @@
};
/* CR06,CR07,CR10,CR11,CR15,CR16,SR0A+CR09(5->7) */
-static struct XGI_LVDSCRT1VDataStruct XGI_LVDSCRT11024x768_1_V[] = {
+static const struct XGI_LVDSCRT1VDataStruct XGI_LVDSCRT11024x768_1_V[] = {
{ {0x97, 0x1F, 0x60, 0x87, 0x5D, 0x83, 0x10} }, /* 00 (x350) */
{ {0xB4, 0x1F, 0x92, 0x89, 0x8F, 0xB5, 0x30} }, /* 01 (x400) */
{ {0x04, 0x3E, 0xE2, 0x89, 0xDF, 0x05, 0x00} }, /* 02 (x480) */
@@ -1598,7 +1586,7 @@
};
/* CR06,CR07,CR10,CR11,CR15,CR16,SR0A */
-static struct XGI_LVDSCRT1VDataStruct XGI_LVDSCRT11024x768_2_V[] = {
+static const struct XGI_LVDSCRT1VDataStruct XGI_LVDSCRT11024x768_2_V[] = {
{ {0x24, 0xBB, 0x31, 0x87, 0x5D, 0x25, 0x30} }, /* 00 (x350) */
{ {0x24, 0xBB, 0x4A, 0x80, 0x8F, 0x25, 0x30} }, /* 01 (x400) */
{ {0x24, 0xBB, 0x72, 0x88, 0xDF, 0x25, 0x30} }, /* 02 (x480) */
@@ -1607,7 +1595,7 @@
};
/* CR06,CR07,CR10,CR11,CR15,CR16,SR0A */
-static struct XGI_LVDSCRT1VDataStruct XGI_LVDSCRT11280x1024_1_V[] = {
+static const struct XGI_LVDSCRT1VDataStruct XGI_LVDSCRT11280x1024_1_V[] = {
{ {0x86, 0x1F, 0x5E, 0x82, 0x5D, 0x87, 0x00} }, /* 00 (x350) */
{ {0xB8, 0x1F, 0x90, 0x84, 0x8F, 0xB9, 0x30} }, /* 01 (x400) */
{ {0x08, 0x3E, 0xE0, 0x84, 0xDF, 0x09, 0x00} }, /* 02 (x480) */
@@ -1617,7 +1605,7 @@
};
/* CR06,CR07,CR10,CR11,CR15,CR16,SR0A */
-static struct XGI_LVDSCRT1VDataStruct XGI_LVDSCRT11280x1024_2_V[] = {
+static const struct XGI_LVDSCRT1VDataStruct XGI_LVDSCRT11280x1024_2_V[] = {
{ {0x28, 0xD2, 0xAF, 0x83, 0xAE, 0xD8, 0xA1} }, /* 00 (x350) */
{ {0x28, 0xD2, 0xC8, 0x8C, 0xC7, 0xF2, 0x81} }, /* 01 (x400) */
{ {0x28, 0xD2, 0xF0, 0x84, 0xEF, 0x1A, 0xB1} }, /* 02 (x480) */
@@ -1627,7 +1615,7 @@
};
/* CR06,CR07,CR10,CR11,CR15,CR16,SR0A */
-static struct XGI_LVDSCRT1VDataStruct XGI_LVDSCRT11400x1050_1_V[] = {
+static const struct XGI_LVDSCRT1VDataStruct XGI_LVDSCRT11400x1050_1_V[] = {
{ {0x6C, 0x1F, 0x60, 0x84, 0x5D, 0x6D, 0x10} }, /* 00 (x350) */
{ {0x9E, 0x1F, 0x93, 0x86, 0x8F, 0x9F, 0x30} }, /* 01 (x400) */
{ {0xEE, 0x1F, 0xE2, 0x86, 0xDF, 0xEF, 0x10} }, /* 02 (x480) */
@@ -1638,7 +1626,7 @@
};
/* CR06,CR07,CR10,CR11,CR15,CR16,SR0A */
-static struct XGI_LVDSCRT1VDataStruct XGI_LVDSCRT11400x1050_2_V[] = {
+static const struct XGI_LVDSCRT1VDataStruct XGI_LVDSCRT11400x1050_2_V[] = {
{ {0x28, 0x92, 0xB6, 0x83, 0xB5, 0xCF, 0x81} }, /* 00 (x350) */
{ {0x28, 0x92, 0xD5, 0x82, 0xD4, 0xEE, 0x81} }, /* 01 (x400) */
{ {0x28, 0x92, 0xFD, 0x8A, 0xFC, 0x16, 0xB1} }, /* 02 (x480) */
@@ -1649,7 +1637,7 @@
};
/* CR06,CR07,CR10,CR11,CR15,CR16,SR0A+CR09(5->7) */
-static struct XGI_LVDSCRT1VDataStruct XGI_LVDSCRT11600x1200_1_V[] = {
+static const struct XGI_LVDSCRT1VDataStruct XGI_LVDSCRT11600x1200_1_V[] = {
{ {0xd4, 0x1F, 0x81, 0x84, 0x5D, 0xd5, 0x10} }, /* 00 (x350) */
{ {0x06, 0x3e, 0xb3, 0x86, 0x8F, 0x07, 0x20} }, /* 01 (x400) */
{ {0x56, 0xba, 0x03, 0x86, 0xDF, 0x57, 0x00} }, /* 02 (x480) */
@@ -1661,7 +1649,7 @@
};
/* CR00,CR02,CR03,CR04,CR05,SR0B,SR0C,SR0E */
-static struct XGI_LVDSCRT1HDataStruct XGI_LVDSCRT11024x768_1_Hx75[] = {
+static const struct XGI_LVDSCRT1HDataStruct XGI_LVDSCRT11024x768_1_Hx75[] = {
{ {0x4B, 0x27, 0x8F, 0x32, 0x1B, 0x00, 0x45, 0x00} },/* ; 00 (320x) */
{ {0x4B, 0x27, 0x8F, 0x2B, 0x03, 0x00, 0x44, 0x00} },/* ; 01 (360x) */
{ {0x55, 0x31, 0x99, 0x46, 0x1D, 0x00, 0x55, 0x00} },/* ; 02 (400x) */
@@ -1673,7 +1661,7 @@
};
/* CR06,CR07,CR10,CR11,CR15,CR16,SR0A+CR09(5->7) */
-static struct XGI_LVDSCRT1VDataStruct XGI_LVDSCRT11024x768_1_Vx75[] = {
+static const struct XGI_LVDSCRT1VDataStruct XGI_LVDSCRT11024x768_1_Vx75[] = {
{ {0x97, 0x1F, 0x60, 0x87, 0x5D, 0x83, 0x10} },/* ; 00 (x350) */
{ {0xB4, 0x1F, 0x92, 0x89, 0x8F, 0xB5, 0x30} },/* ; 01 (x400) */
{ {0xFE, 0x1F, 0xE0, 0x84, 0xDF, 0xFF, 0x10} },/* ; 02 (x480) */
@@ -1682,7 +1670,7 @@
};
/* CR00,CR02,CR03,CR04,CR05,SR0B,SR0C,SR0E */
-static struct XGI_LVDSCRT1HDataStruct XGI_LVDSCRT11024x768_2_Hx75[] = {
+static const struct XGI_LVDSCRT1HDataStruct XGI_LVDSCRT11024x768_2_Hx75[] = {
{ {0x63, 0x27, 0x87, 0x3B, 0x8C, 0x00, 0x01, 0x00} },/* ; 00 (320x) */
{ {0x63, 0x27, 0x87, 0x3B, 0x8C, 0x00, 0x01, 0x00} },/* ; 01 (360x) */
{ {0x63, 0x31, 0x87, 0x3D, 0x8E, 0x00, 0x01, 0x00} },/* ; 02 (400x) */
@@ -1694,7 +1682,7 @@
};
/* CR06,CR07,CR10,CR11,CR15,CR16,SR0A */
-static struct XGI_LVDSCRT1VDataStruct XGI_LVDSCRT11024x768_2_Vx75[] = {
+static const struct XGI_LVDSCRT1VDataStruct XGI_LVDSCRT11024x768_2_Vx75[] = {
{ {0x24, 0xBB, 0x31, 0x87, 0x5D, 0x25, 0x30} },/* ; 00 (x350) */
{ {0x24, 0xBB, 0x4A, 0x80, 0x8F, 0x25, 0x30} },/* ; 01 (x400) */
{ {0x24, 0xBB, 0x72, 0x88, 0xDF, 0x25, 0x30} },/* ; 02 (x480) */
@@ -1703,7 +1691,7 @@
};
/* CR00,CR02,CR03,CR04,CR05,SR0B,SR0C,SR0E */
-static struct XGI_LVDSCRT1HDataStruct XGI_LVDSCRT11280x1024_1_Hx75[] = {
+static const struct XGI_LVDSCRT1HDataStruct XGI_LVDSCRT11280x1024_1_Hx75[] = {
{ {0x56, 0x27, 0x9A, 0x30, 0x1E, 0x00, 0x05, 0x00} },/* ; 00 (320x) */
{ {0x56, 0x27, 0x9A, 0x30, 0x1E, 0x00, 0x05, 0x00} },/* ; 01 (360x) */
{ {0x60, 0x31, 0x84, 0x3A, 0x88, 0x00, 0x01, 0x00} },/* ; 02 (400x) */
@@ -1716,7 +1704,7 @@
};
/* CR06,CR07,CR10,CR11,CR15,CR16,SR0A */
-static struct XGI_LVDSCRT1VDataStruct XGI_LVDSCRT11280x1024_1_Vx75[] = {
+static const struct XGI_LVDSCRT1VDataStruct XGI_LVDSCRT11280x1024_1_Vx75[] = {
{ {0x86, 0xD1, 0xBC, 0x80, 0xBB, 0xE5, 0x00} },/* ; 00 (x350) */
{ {0xB8, 0x1F, 0x90, 0x84, 0x8F, 0xB9, 0x30} },/* ; 01 (x400) */
{ {0x08, 0x3E, 0xE0, 0x84, 0xDF, 0x09, 0x00} },/* ; 02 (x480) */
@@ -1725,7 +1713,7 @@
{ {0x28, 0x5A, 0x13, 0x87, 0xFF, 0x29, 0xA9} } /* ; 05 (x1024) */
};
/* CR00,CR02,CR03,CR04,CR05,SR0B,SR0C,SR0E */
-static struct XGI_LVDSCRT1HDataStruct XGI_LVDSCRT11280x1024_2_Hx75[] = {
+static const struct XGI_LVDSCRT1HDataStruct XGI_LVDSCRT11280x1024_2_Hx75[] = {
{ {0x7E, 0x3B, 0x9A, 0x44, 0x12, 0x00, 0x01, 0x00} },/* ; 00 (320x) */
{ {0x7E, 0x3B, 0x9A, 0x44, 0x12, 0x00, 0x01, 0x00} },/* ; 01 (360x) */
{ {0x7E, 0x40, 0x84, 0x49, 0x91, 0x00, 0x01, 0x00} },/* ; 02 (400x) */
@@ -1738,7 +1726,7 @@
};
/* CR06,CR07,CR10,CR11,CR15,CR16,SR0A */
-static struct XGI_LVDSCRT1VDataStruct XGI_LVDSCRT11280x1024_2_Vx75[] = {
+static const struct XGI_LVDSCRT1VDataStruct XGI_LVDSCRT11280x1024_2_Vx75[] = {
{ {0x28, 0xD2, 0xAF, 0x83, 0xAE, 0xD8, 0xA1} },/* ; 00 (x350) */
{ {0x28, 0xD2, 0xC8, 0x8C, 0xC7, 0xF2, 0x81} },/* ; 01 (x400) */
{ {0x28, 0xD2, 0xF0, 0x84, 0xEF, 0x1A, 0xB1} },/* ; 02 (x480) */
@@ -1748,115 +1736,141 @@
};
/*add for new UNIVGABIOS*/
-static struct XGI330_LCDDataTablStruct XGI_LCDDataTable[] = {
- {Panel_1024x768, 0x0019, 0x0001, 0}, /* XGI_ExtLCD1024x768Data */
- {Panel_1024x768, 0x0019, 0x0000, 1}, /* XGI_StLCD1024x768Data */
- {Panel_1024x768, 0x0018, 0x0010, 2}, /* XGI_CetLCD1024x768Data */
- {Panel_1280x1024, 0x0019, 0x0001, 3}, /* XGI_ExtLCD1280x1024Data */
- {Panel_1280x1024, 0x0019, 0x0000, 4}, /* XGI_StLCD1280x1024Data */
- {Panel_1280x1024, 0x0018, 0x0010, 5}, /* XGI_CetLCD1280x1024Data */
- {Panel_1400x1050, 0x0019, 0x0001, 6}, /* XGI_ExtLCD1400x1050Data */
- {Panel_1400x1050, 0x0019, 0x0000, 7}, /* XGI_StLCD1400x1050Data */
- {Panel_1400x1050, 0x0018, 0x0010, 8}, /* XGI_CetLCD1400x1050Data */
- {Panel_1600x1200, 0x0019, 0x0001, 9}, /* XGI_ExtLCD1600x1200Data */
- {Panel_1600x1200, 0x0019, 0x0000, 10}, /* XGI_StLCD1600x1200Data */
- {PanelRef60Hz, 0x0008, 0x0008, 11}, /* XGI_NoScalingData */
- {Panel_1024x768x75, 0x0019, 0x0001, 12}, /* XGI_ExtLCD1024x768x75Data */
- {Panel_1024x768x75, 0x0019, 0x0000, 13}, /* XGI_StLCD1024x768x75Data */
- {Panel_1024x768x75, 0x0018, 0x0010, 14}, /* XGI_CetLCD1024x768x75Data */
- /* XGI_ExtLCD1280x1024x75Data */
- {Panel_1280x1024x75, 0x0019, 0x0001, 15},
- /* XGI_StLCD1280x1024x75Data */
- {Panel_1280x1024x75, 0x0019, 0x0000, 16},
- /* XGI_CetLCD1280x1024x75Data */
- {Panel_1280x1024x75, 0x0018, 0x0010, 17},
- {PanelRef75Hz, 0x0008, 0x0008, 18}, /* XGI_NoScalingDatax75 */
- {0xFF, 0x0000, 0x0000, 0} /* End of table */
+static const struct XGI330_LCDDataTablStruct XGI_LCDDataTable[] = {
+ {Panel_1024x768, 0x0019, 0x0001, XGI_ExtLCD1024x768Data },
+ {Panel_1024x768, 0x0019, 0x0000, XGI_StLCD1024x768Data },
+ {Panel_1024x768, 0x0018, 0x0010, XGI_CetLCD1024x768Data },
+ {Panel_1280x1024, 0x0019, 0x0001, XGI_ExtLCD1280x1024Data },
+ {Panel_1280x1024, 0x0019, 0x0000, XGI_StLCD1280x1024Data },
+ {Panel_1280x1024, 0x0018, 0x0010, XGI_CetLCD1280x1024Data },
+ {Panel_1400x1050, 0x0019, 0x0001, xgifb_lcd_1400x1050 },
+ {Panel_1400x1050, 0x0019, 0x0000, xgifb_lcd_1400x1050 },
+ {Panel_1400x1050, 0x0018, 0x0010, XGI_CetLCD1400x1050Data },
+ {Panel_1600x1200, 0x0019, 0x0001, XGI_ExtLCD1600x1200Data },
+ {Panel_1600x1200, 0x0019, 0x0000, XGI_StLCD1600x1200Data },
+ {PanelRef60Hz, 0x0008, 0x0008, XGI_NoScalingData },
+ {Panel_1024x768x75, 0x0019, 0x0001, XGI_ExtLCD1024x768x75Data },
+ {Panel_1024x768x75, 0x0019, 0x0000, XGI_ExtLCD1024x768x75Data },
+ {Panel_1024x768x75, 0x0018, 0x0010, XGI_CetLCD1024x768x75Data },
+ {Panel_1280x1024x75, 0x0019, 0x0001, xgifb_lcd_1280x1024x75 },
+ {Panel_1280x1024x75, 0x0019, 0x0000, xgifb_lcd_1280x1024x75 },
+ {Panel_1280x1024x75, 0x0018, 0x0010, XGI_CetLCD1280x1024x75Data },
+ {PanelRef75Hz, 0x0008, 0x0008, XGI_NoScalingDatax75 },
+ {0xFF, 0x0000, 0x0000, NULL } /* End of table */
};
-static struct XGI330_LCDDataTablStruct XGI_LCDDesDataTable[] = {
- {Panel_1024x768, 0x0019, 0x0001, 0}, /* XGI_ExtLCDDes1024x768Data */
- {Panel_1024x768, 0x0019, 0x0000, 1}, /* XGI_StLCDDes1024x768Data */
- {Panel_1024x768, 0x0018, 0x0010, 2}, /* XGI_CetLCDDes1024x768Data */
- {Panel_1280x1024, 0x0019, 0x0001, 3}, /* XGI_ExtLCDDes1280x1024Data */
- {Panel_1280x1024, 0x0019, 0x0000, 4}, /* XGI_StLCDDes1280x1024Data */
- {Panel_1280x1024, 0x0018, 0x0010, 5}, /* XGI_CetLCDDes1280x1024Data */
- {Panel_1400x1050, 0x0019, 0x0001, 6}, /* XGI_ExtLCDDes1400x1050Data */
- {Panel_1400x1050, 0x0019, 0x0000, 7}, /* XGI_StLCDDes1400x1050Data */
- {Panel_1400x1050, 0x0418, 0x0010, 8}, /* XGI_CetLCDDes1400x1050Data */
- {Panel_1400x1050, 0x0418, 0x0410, 9}, /* XGI_CetLCDDes1400x1050Data2 */
- {Panel_1600x1200, 0x0019, 0x0001, 10}, /* XGI_ExtLCDDes1600x1200Data */
- {Panel_1600x1200, 0x0019, 0x0000, 11}, /* XGI_StLCDDes1600x1200Data */
- {PanelRef60Hz, 0x0008, 0x0008, 12}, /* XGI_NoScalingDesData */
- /* XGI_ExtLCDDes1024x768x75Data */
- {Panel_1024x768x75, 0x0019, 0x0001, 13},
- /* XGI_StLCDDes1024x768x75Data */
- {Panel_1024x768x75, 0x0019, 0x0000, 14},
- /* XGI_CetLCDDes1024x768x75Data */
- {Panel_1024x768x75, 0x0018, 0x0010, 15},
- /* XGI_ExtLCDDes1280x1024x75Data */
- {Panel_1280x1024x75, 0x0019, 0x0001, 16},
- /* XGI_StLCDDes1280x1024x75Data */
- {Panel_1280x1024x75, 0x0019, 0x0000, 17},
- /* XGI_CetLCDDes1280x1024x75Data */
- {Panel_1280x1024x75, 0x0018, 0x0010, 18},
- {PanelRef75Hz, 0x0008, 0x0008, 19}, /* XGI_NoScalingDesDatax75 */
- {0xFF, 0x0000, 0x0000, 0}
+static const struct XGI330_LCDDataTablStruct XGI_LCDDesDataTable[] = {
+ {Panel_1024x768, 0x0019, 0x0001, XGI_ExtLCDDes1024x768Data },
+ {Panel_1024x768, 0x0019, 0x0000, XGI_StLCDDes1024x768Data },
+ {Panel_1024x768, 0x0018, 0x0010, XGI_CetLCDDes1024x768Data },
+ {Panel_1280x1024, 0x0019, 0x0001, XGI_ExtLCDDes1280x1024Data },
+ {Panel_1280x1024, 0x0019, 0x0000, XGI_StLCDDes1280x1024Data },
+ {Panel_1280x1024, 0x0018, 0x0010, XGI_CetLCDDes1280x1024Data },
+ {Panel_1400x1050, 0x0019, 0x0001, xgifb_lcddes_1400x1050 },
+ {Panel_1400x1050, 0x0019, 0x0000, xgifb_lcddes_1400x1050 },
+ {Panel_1400x1050, 0x0418, 0x0010, XGI_CetLCDDes1400x1050Data },
+ {Panel_1400x1050, 0x0418, 0x0410, XGI_CetLCDDes1400x1050Data2 },
+ {Panel_1600x1200, 0x0019, 0x0001, XGI_ExtLCDDes1600x1200Data },
+ {Panel_1600x1200, 0x0019, 0x0000, XGI_StLCDDes1600x1200Data },
+ {PanelRef60Hz, 0x0008, 0x0008, XGI_NoScalingDesData },
+ {Panel_1024x768x75, 0x0019, 0x0001, xgifb_lcddes_1024x768x75 },
+ {Panel_1024x768x75, 0x0019, 0x0000, xgifb_lcddes_1024x768x75 },
+ {Panel_1024x768x75, 0x0018, 0x0010, XGI_CetLCDDes1024x768x75Data },
+ {Panel_1280x1024x75, 0x0019, 0x0001, xgifb_lcddes_1280x1024x75 },
+ {Panel_1280x1024x75, 0x0019, 0x0000, xgifb_lcddes_1280x1024x75 },
+ {Panel_1280x1024x75, 0x0018, 0x0010, XGI_CetLCDDes1280x1024x75Data },
+ {PanelRef75Hz, 0x0008, 0x0008, XGI_NoScalingDesDatax75 },
+ {0xFF, 0x0000, 0x0000, NULL }
};
-static struct XGI330_LCDDataTablStruct xgifb_epllcd_crt1[] = {
- {Panel_1024x768, 0x0018, 0x0000, 0}, /* XGI_LVDSCRT11024x768_1 */
- {Panel_1024x768, 0x0018, 0x0010, 1}, /* XGI_LVDSCRT11024x768_2 */
- {Panel_1280x1024, 0x0018, 0x0000, 2}, /* XGI_LVDSCRT11280x1024_1 */
- {Panel_1280x1024, 0x0018, 0x0010, 3}, /* XGI_LVDSCRT11280x1024_2 */
- {Panel_1400x1050, 0x0018, 0x0000, 4}, /* XGI_LVDSCRT11400x1050_1 */
- {Panel_1400x1050, 0x0018, 0x0010, 5}, /* XGI_LVDSCRT11400x1050_2 */
- {Panel_1600x1200, 0x0018, 0x0000, 6}, /* XGI_LVDSCRT11600x1200_1 */
- {Panel_1024x768x75, 0x0018, 0x0000, 7}, /* XGI_LVDSCRT11024x768_1x75 */
- {Panel_1024x768x75, 0x0018, 0x0010, 8}, /* XGI_LVDSCRT11024x768_2x75 */
- {Panel_1280x1024x75, 0x0018, 0x0000, 9}, /*XGI_LVDSCRT11280x1024_1x75*/
- {Panel_1280x1024x75, 0x0018, 0x0010, 10},/*XGI_LVDSCRT11280x1024_2x75*/
- {0xFF, 0x0000, 0x0000, 0}
+static const struct XGI330_LCDDataTablStruct xgifb_lcddldes[] = {
+ {Panel_1024x768, 0x0019, 0x0001, XGI_ExtLCDDes1024x768Data },
+ {Panel_1024x768, 0x0019, 0x0000, XGI_StLCDDes1024x768Data },
+ {Panel_1024x768, 0x0018, 0x0010, XGI_CetLCDDes1024x768Data },
+ {Panel_1280x1024, 0x0019, 0x0001, XGI_ExtLCDDLDes1280x1024Data },
+ {Panel_1280x1024, 0x0019, 0x0000, XGI_StLCDDLDes1280x1024Data },
+ {Panel_1280x1024, 0x0018, 0x0010, XGI_CetLCDDLDes1280x1024Data },
+ {Panel_1400x1050, 0x0019, 0x0001, xgifb_lcddldes_1400x1050 },
+ {Panel_1400x1050, 0x0019, 0x0000, xgifb_lcddldes_1400x1050 },
+ {Panel_1400x1050, 0x0418, 0x0010, XGI_CetLCDDes1400x1050Data },
+ {Panel_1400x1050, 0x0418, 0x0410, XGI_CetLCDDes1400x1050Data2 },
+ {Panel_1600x1200, 0x0019, 0x0001, XGI_ExtLCDDLDes1600x1200Data },
+ {Panel_1600x1200, 0x0019, 0x0000, XGI_StLCDDLDes1600x1200Data },
+ {PanelRef60Hz, 0x0008, 0x0008, XGI_NoScalingDesData },
+ {Panel_1024x768x75, 0x0019, 0x0001, xgifb_lcddes_1024x768x75 },
+ {Panel_1024x768x75, 0x0019, 0x0000, xgifb_lcddes_1024x768x75 },
+ {Panel_1024x768x75, 0x0018, 0x0010, XGI_CetLCDDes1024x768x75Data },
+ {Panel_1280x1024x75, 0x0019, 0x0001, xgifb_lcddldes_1280x1024x75 },
+ {Panel_1280x1024x75, 0x0019, 0x0000, xgifb_lcddldes_1280x1024x75 },
+ {Panel_1280x1024x75, 0x0018, 0x0010, XGI_CetLCDDLDes1280x1024x75Data },
+ {PanelRef75Hz, 0x0008, 0x0008, XGI_NoScalingDesDatax75 },
+ {0xFF, 0x0000, 0x0000, NULL }
};
-static struct XGI330_LCDDataTablStruct XGI_EPLLCDDataPtr[] = {
- {Panel_1024x768, 0x0018, 0x0000, 0}, /* XGI_LVDS1024x768Data_1 */
- {Panel_1024x768, 0x0018, 0x0010, 1}, /* XGI_LVDS1024x768Data_2 */
- {Panel_1280x1024, 0x0018, 0x0000, 2}, /* XGI_LVDS1280x1024Data_1 */
- {Panel_1280x1024, 0x0018, 0x0010, 3}, /* XGI_LVDS1280x1024Data_2 */
- {Panel_1400x1050, 0x0018, 0x0000, 4}, /* XGI_LVDS1400x1050Data_1 */
- {Panel_1400x1050, 0x0018, 0x0010, 5}, /* XGI_LVDS1400x1050Data_2 */
- {Panel_1600x1200, 0x0018, 0x0000, 6}, /* XGI_LVDS1600x1200Data_1 */
- {PanelRef60Hz, 0x0008, 0x0008, 7}, /* XGI_LVDSNoScalingData */
- {Panel_1024x768x75, 0x0018, 0x0000, 8}, /* XGI_LVDS1024x768Data_1x75 */
- {Panel_1024x768x75, 0x0018, 0x0010, 9}, /* XGI_LVDS1024x768Data_2x75 */
- /* XGI_LVDS1280x1024Data_1x75 */
- {Panel_1280x1024x75, 0x0018, 0x0000, 10},
- /* XGI_LVDS1280x1024Data_2x75 */
- {Panel_1280x1024x75, 0x0018, 0x0010, 11},
- {PanelRef75Hz, 0x0008, 0x0008, 12}, /* XGI_LVDSNoScalingDatax75 */
- {0xFF, 0x0000, 0x0000, 0}
+static const struct XGI330_LCDDataTablStruct xgifb_epllcd_crt1_h[] = {
+ {Panel_1024x768, 0x0018, 0x0000, XGI_LVDSCRT11024x768_1_H },
+ {Panel_1024x768, 0x0018, 0x0010, XGI_LVDSCRT11024x768_2_H },
+ {Panel_1280x1024, 0x0018, 0x0000, XGI_LVDSCRT11280x1024_1_H },
+ {Panel_1280x1024, 0x0018, 0x0010, XGI_LVDSCRT11280x1024_2_H },
+ {Panel_1400x1050, 0x0018, 0x0000, XGI_LVDSCRT11400x1050_1_H },
+ {Panel_1400x1050, 0x0018, 0x0010, XGI_LVDSCRT11400x1050_2_H },
+ {Panel_1600x1200, 0x0018, 0x0000, XGI_LVDSCRT11600x1200_1_H },
+ {Panel_1024x768x75, 0x0018, 0x0000, XGI_LVDSCRT11024x768_1_Hx75 },
+ {Panel_1024x768x75, 0x0018, 0x0010, XGI_LVDSCRT11024x768_2_Hx75 },
+ {Panel_1280x1024x75, 0x0018, 0x0000, XGI_LVDSCRT11280x1024_1_Hx75 },
+ {Panel_1280x1024x75, 0x0018, 0x0010, XGI_LVDSCRT11280x1024_2_Hx75 },
+ {0xFF, 0x0000, 0x0000, NULL }
};
-static struct XGI330_LCDDataTablStruct XGI_EPLLCDDesDataPtr[] = {
- {Panel_1024x768, 0x0018, 0x0000, 0}, /* XGI_LVDS1024x768Des_1 */
- {Panel_1024x768, 0x0618, 0x0410, 1}, /* XGI_LVDS1024x768Des_3 */
- {Panel_1024x768, 0x0018, 0x0010, 2}, /* XGI_LVDS1024x768Des_2 */
- {Panel_1280x1024, 0x0018, 0x0000, 3}, /* XGI_LVDS1280x1024Des_1 */
- {Panel_1280x1024, 0x0018, 0x0010, 4}, /* XGI_LVDS1280x1024Des_2 */
- {Panel_1400x1050, 0x0018, 0x0000, 5}, /* XGI_LVDS1400x1050Des_1 */
- {Panel_1400x1050, 0x0018, 0x0010, 6}, /* XGI_LVDS1400x1050Des_2 */
- {Panel_1600x1200, 0x0018, 0x0000, 7}, /* XGI_LVDS1600x1200Des_1 */
- {PanelRef60Hz, 0x0008, 0x0008, 8}, /* XGI_LVDSNoScalingDesData */
- {Panel_1024x768x75, 0x0018, 0x0000, 9}, /* XGI_LVDS1024x768Des_1x75 */
- {Panel_1024x768x75, 0x0618, 0x0410, 10}, /* XGI_LVDS1024x768Des_3x75 */
- {Panel_1024x768x75, 0x0018, 0x0010, 11}, /* XGI_LVDS1024x768Des_2x75 */
- /* XGI_LVDS1280x1024Des_1x75 */
- {Panel_1280x1024x75, 0x0018, 0x0000, 12},
- /* XGI_LVDS1280x1024Des_2x75 */
- {Panel_1280x1024x75, 0x0018, 0x0010, 13},
- {PanelRef75Hz, 0x0008, 0x0008, 14}, /* XGI_LVDSNoScalingDesDatax75 */
- {0xFF, 0x0000, 0x0000, 0}
+static const struct XGI330_LCDDataTablStruct xgifb_epllcd_crt1_v[] = {
+ {Panel_1024x768, 0x0018, 0x0000, XGI_LVDSCRT11024x768_1_V },
+ {Panel_1024x768, 0x0018, 0x0010, XGI_LVDSCRT11024x768_2_V },
+ {Panel_1280x1024, 0x0018, 0x0000, XGI_LVDSCRT11280x1024_1_V },
+ {Panel_1280x1024, 0x0018, 0x0010, XGI_LVDSCRT11280x1024_2_V },
+ {Panel_1400x1050, 0x0018, 0x0000, XGI_LVDSCRT11400x1050_1_V },
+ {Panel_1400x1050, 0x0018, 0x0010, XGI_LVDSCRT11400x1050_2_V },
+ {Panel_1600x1200, 0x0018, 0x0000, XGI_LVDSCRT11600x1200_1_V },
+ {Panel_1024x768x75, 0x0018, 0x0000, XGI_LVDSCRT11024x768_1_Vx75 },
+ {Panel_1024x768x75, 0x0018, 0x0010, XGI_LVDSCRT11024x768_2_Vx75 },
+ {Panel_1280x1024x75, 0x0018, 0x0000, XGI_LVDSCRT11280x1024_1_Vx75 },
+ {Panel_1280x1024x75, 0x0018, 0x0010, XGI_LVDSCRT11280x1024_2_Vx75 },
+ {0xFF, 0x0000, 0x0000, NULL }
+};
+
+static const struct XGI330_LCDDataTablStruct XGI_EPLLCDDataPtr[] = {
+ {Panel_1024x768, 0x0018, 0x0000, XGI_LVDS1024x768Data_1 },
+ {Panel_1024x768, 0x0018, 0x0010, XGI_LVDS1024x768Data_2 },
+ {Panel_1280x1024, 0x0018, 0x0000, XGI_LVDS1280x1024Data_1 },
+ {Panel_1280x1024, 0x0018, 0x0010, XGI_LVDS1280x1024Data_2 },
+ {Panel_1400x1050, 0x0018, 0x0000, XGI_LVDS1400x1050Data_1 },
+ {Panel_1400x1050, 0x0018, 0x0010, XGI_LVDS1400x1050Data_2 },
+ {Panel_1600x1200, 0x0018, 0x0000, XGI_LVDS1600x1200Data_1 },
+ {PanelRef60Hz, 0x0008, 0x0008, XGI_LVDSNoScalingData },
+ {Panel_1024x768x75, 0x0018, 0x0000, XGI_LVDS1024x768Data_1x75 },
+ {Panel_1024x768x75, 0x0018, 0x0010, XGI_LVDS1024x768Data_2x75 },
+ {Panel_1280x1024x75, 0x0018, 0x0000, XGI_LVDS1280x1024Data_1x75 },
+ {Panel_1280x1024x75, 0x0018, 0x0010, XGI_LVDS1280x1024Data_2x75 },
+ {PanelRef75Hz, 0x0008, 0x0008, XGI_LVDSNoScalingDatax75 },
+ {0xFF, 0x0000, 0x0000, NULL }
+};
+
+static const struct XGI330_LCDDataTablStruct XGI_EPLLCDDesDataPtr[] = {
+ {Panel_1024x768, 0x0018, 0x0000, XGI_LVDS1024x768Des_1 },
+ {Panel_1024x768, 0x0618, 0x0410, XGI_LVDS1024x768Des_3 },
+ {Panel_1024x768, 0x0018, 0x0010, XGI_LVDS1024x768Des_2 },
+ {Panel_1280x1024, 0x0018, 0x0000, XGI_LVDS1280x1024Des_1 },
+ {Panel_1280x1024, 0x0018, 0x0010, XGI_LVDS1280x1024Des_2 },
+ {Panel_1400x1050, 0x0018, 0x0000, XGI_LVDS1400x1050Des_1 },
+ {Panel_1400x1050, 0x0018, 0x0010, XGI_LVDS1400x1050Des_2 },
+ {Panel_1600x1200, 0x0018, 0x0000, XGI_LVDS1600x1200Des_1 },
+ {PanelRef60Hz, 0x0008, 0x0008, XGI_LVDSNoScalingDesData },
+ {Panel_1024x768x75, 0x0018, 0x0000, XGI_LVDS1024x768Des_1x75 },
+ {Panel_1024x768x75, 0x0618, 0x0410, XGI_LVDS1024x768Des_3x75 },
+ {Panel_1024x768x75, 0x0018, 0x0010, XGI_LVDS1024x768Des_2x75 },
+ {Panel_1280x1024x75, 0x0018, 0x0000, XGI_LVDS1280x1024Des_1x75 },
+ {Panel_1280x1024x75, 0x0018, 0x0010, XGI_LVDS1280x1024Des_2x75 },
+ {PanelRef75Hz, 0x0008, 0x0008, XGI_LVDSNoScalingDesDatax75 },
+ {0xFF, 0x0000, 0x0000, NULL }
};
static const struct XGI330_TVDataTablStruct XGI_TVDataTable[] = {
@@ -1877,7 +1891,7 @@
};
/* Dual link only */
-static struct XGI330_LCDCapStruct XGI_LCDDLCapList[] = {
+static const struct XGI330_LCDCapStruct XGI_LCDDLCapList[] = {
/* LCDCap1024x768 */
{Panel_1024x768, DefaultLCDCap, 0, 0x88, 0x06, VCLK65_315,
0x6C, 0xC3, 0x35, 0x62, 0x02, 0x14, 0x0A, 0x02, 0x00,
@@ -1912,7 +1926,7 @@
0x30, 0x10, 0x5A, 0x10, 0x10, 0x0A, 0xC0, 0x28, 0x10}
};
-static struct XGI330_LCDCapStruct XGI_LCDCapList[] = {
+static const struct XGI330_LCDCapStruct XGI_LCDCapList[] = {
/* LCDCap1024x768 */
{Panel_1024x768, DefaultLCDCap, 0, 0x88, 0x06, VCLK65_315,
0x6C, 0xC3, 0x35, 0x62, 0x02, 0x14, 0x0A, 0x02, 0x00,
@@ -1947,7 +1961,7 @@
0x30, 0x10, 0x5A, 0x10, 0x10, 0x0A, 0xC0, 0x28, 0x10}
};
-static struct XGI_Ext2Struct XGI330_RefIndex[] = {
+const struct XGI_Ext2Struct XGI330_RefIndex[] = {
{Mode32Bpp + SupportAllCRT2 + SyncPN, RES320x200, VCLK25_175,
0x00, 0x10, 0x59, 320, 200},/* 00 */
{Mode32Bpp + SupportAllCRT2 + SyncPN, RES320x200, VCLK25_175,
@@ -2101,21 +2115,13 @@
0x30, 0x47, 0x37, 1024, 768},/* 48 1024x768x160Hz */
};
-static unsigned char XGI330_ScreenOffset[] = {
+static const unsigned char XGI330_ScreenOffset[] = {
0x14, 0x19, 0x20, 0x28, 0x32, 0x40,
0x50, 0x64, 0x78, 0x80, 0x2d, 0x35,
0x57, 0x48
};
-static struct SiS_StResInfo_S XGI330_StResInfo[] = {
- {640, 400},
- {640, 350},
- {720, 400},
- {720, 350},
- {640, 480}
-};
-
-static struct SiS_ModeResInfo_S XGI330_ModeResInfo[] = {
+static const struct SiS_ModeResInfo_S XGI330_ModeResInfo[] = {
{ 320, 200, 8, 8},
{ 320, 240, 8, 8},
{ 320, 400, 8, 8},
@@ -2141,7 +2147,7 @@
{1152, 864, 8, 16}
};
-static struct SiS_VCLKData XGI_VCLKData[] = {
+const struct SiS_VCLKData XGI_VCLKData[] = {
/* SR2B,SR2C,SR2D */
{0x1B, 0xE1, 25}, /* 00 (25.175MHz) */
{0x4E, 0xE4, 28}, /* 01 (28.322MHz) */
@@ -2234,7 +2240,7 @@
{0xFF, 0x00, 0} /* End mark */
};
-static struct SiS_VBVCLKData XGI_VBVCLKData[] = {
+static const struct SiS_VBVCLKData XGI_VBVCLKData[] = {
{0x1B, 0xE1, 25}, /* 00 (25.175MHz) */
{0x4E, 0xE4, 28}, /* 01 (28.322MHz) */
{0x57, 0xE4, 31}, /* 02 (31.500MHz) */
@@ -2329,7 +2335,7 @@
#define XGI301TVDelay 0x22
#define XGI301LCDDelay 0x12
-static unsigned char TVAntiFlickList[] = {/* NTSCAntiFlicker */
+static const unsigned char TVAntiFlickList[] = {/* NTSCAntiFlicker */
0x04, /* ; 0 Adaptive */
0x00, /* ; 1 new anti-flicker ? */
@@ -2341,7 +2347,7 @@
};
-static unsigned char TVEdgeList[] = {
+static const unsigned char TVEdgeList[] = {
0x00, /* ; 0 NTSC No Edge enhance */
0x04, /* ; 1 NTSC Adaptive Edge enhance */
0x00, /* ; 0 PAL No Edge enhance */
@@ -2350,7 +2356,7 @@
0x00 /* ; 1 HiTV */
};
-static unsigned long TVPhaseList[] = {
+static const unsigned long TVPhaseList[] = {
0x08BAED21, /* ; 0 NTSC phase */
0x00E3052A, /* ; 1 PAL phase */
0x9B2EE421, /* ; 2 PAL-M phase */
@@ -2367,7 +2373,7 @@
0xE00A831E /* ; D PAL-M 1024x768 */
};
-static unsigned char NTSCYFilter1[] = {
+static const unsigned char NTSCYFilter1[] = {
0x00, 0xF4, 0x10, 0x38, /* 0 : 320x text mode */
0x00, 0xF4, 0x10, 0x38, /* 1 : 360x text mode */
0xEB, 0x04, 0x25, 0x18, /* 2 : 640x text mode */
@@ -2377,7 +2383,7 @@
0xEB, 0x15, 0x25, 0xF6 /* 6 : 800x gra. mode */
};
-static unsigned char PALYFilter1[] = {
+static const unsigned char PALYFilter1[] = {
0x00, 0xF4, 0x10, 0x38, /* 0 : 320x text mode */
0x00, 0xF4, 0x10, 0x38, /* 1 : 360x text mode */
0xF1, 0xF7, 0x1F, 0x32, /* 2 : 640x text mode */
@@ -2387,7 +2393,7 @@
0xFC, 0xFB, 0x14, 0x2A /* 6 : 800x gra. mode */
};
-static unsigned char xgifb_palmn_yfilter1[] = {
+static const unsigned char xgifb_palmn_yfilter1[] = {
0x00, 0xF4, 0x10, 0x38, /* 0 : 320x text mode */
0x00, 0xF4, 0x10, 0x38, /* 1 : 360x text mode */
0xEB, 0x04, 0x10, 0x18, /* 2 : 640x text mode */
@@ -2398,7 +2404,7 @@
0xFF, 0xFF, 0xFF, 0xFF /* End of Table */
};
-static unsigned char xgifb_yfilter2[] = {
+static const unsigned char xgifb_yfilter2[] = {
0xFF, 0x03, 0x02, 0xF6, 0xFC, 0x27, 0x46, /* 0 : 320x text mode */
0x01, 0x02, 0xFE, 0xF7, 0x03, 0x27, 0x3C, /* 1 : 360x text mode */
0xFF, 0x03, 0x02, 0xF6, 0xFC, 0x27, 0x46, /* 2 : 640x text mode */
@@ -2409,13 +2415,13 @@
0xFF, 0xFF, 0xFC, 0x00, 0x0F, 0x22, 0x28 /* 7 : 1024xgra. mode */
};
-static unsigned char XGI_NTSC1024AdjTime[] = {
+static const unsigned char XGI_NTSC1024AdjTime[] = {
0xa7, 0x07, 0xf2, 0x6e, 0x17, 0x8b, 0x73, 0x53,
0x13, 0x40, 0x34, 0xF4, 0x63, 0xBB, 0xCC, 0x7A,
0x58, 0xe4, 0x73, 0xd0, 0x13
};
-static struct XGI301C_Tap4TimingStruct xgifb_tap4_timing[] = {
+static const struct XGI301C_Tap4TimingStruct xgifb_tap4_timing[] = {
{0, {
0x00, 0x20, 0x00, 0x00, 0x7F, 0x20, 0x02, 0x7F, /* ; C0-C7 */
0x7D, 0x20, 0x04, 0x7F, 0x7D, 0x1F, 0x06, 0x7E, /* ; C8-CF */
@@ -2429,7 +2435,7 @@
}
};
-static struct XGI301C_Tap4TimingStruct PALTap4Timing[] = {
+static const struct XGI301C_Tap4TimingStruct PALTap4Timing[] = {
{600, {
0x05, 0x19, 0x05, 0x7D, 0x03, 0x19, 0x06, 0x7E, /* ; C0-C7 */
0x02, 0x19, 0x08, 0x7D, 0x01, 0x18, 0x0A, 0x7D, /* ; C8-CF */
@@ -2465,7 +2471,7 @@
}
};
-static struct XGI301C_Tap4TimingStruct xgifb_ntsc_525_tap4_timing[] = {
+static const struct XGI301C_Tap4TimingStruct xgifb_ntsc_525_tap4_timing[] = {
{480, {
0x04, 0x1A, 0x04, 0x7E, 0x03, 0x1A, 0x06, 0x7D, /* ; C0-C7 */
0x01, 0x1A, 0x08, 0x7D, 0x00, 0x19, 0x0A, 0x7D, /* ; C8-CF */
@@ -2501,7 +2507,7 @@
}
};
-static struct XGI301C_Tap4TimingStruct YPbPr750pTap4Timing[] = {
+static const struct XGI301C_Tap4TimingStruct YPbPr750pTap4Timing[] = {
{0xFFFF, {
0x05, 0x19, 0x05, 0x7D, 0x03, 0x19, 0x06, 0x7E, /* ; C0-C7 */
0x02, 0x19, 0x08, 0x7D, 0x01, 0x18, 0x0A, 0x7D, /* ; C8-CF */
diff --git a/drivers/staging/zram/zram_drv.c b/drivers/staging/zram/zram_drv.c
index 6edefde..fb4a7c9 100644
--- a/drivers/staging/zram/zram_drv.c
+++ b/drivers/staging/zram/zram_drv.c
@@ -183,90 +183,24 @@
return bvec->bv_len != PAGE_SIZE;
}
-static int zram_bvec_read(struct zram *zram, struct bio_vec *bvec,
- u32 index, int offset, struct bio *bio)
+static int zram_decompress_page(struct zram *zram, char *mem, u32 index)
{
- int ret;
- size_t clen;
- struct page *page;
- unsigned char *user_mem, *cmem, *uncmem = NULL;
-
- page = bvec->bv_page;
-
- if (zram_test_flag(zram, index, ZRAM_ZERO)) {
- handle_zero_page(bvec);
- return 0;
- }
-
- /* Requested page is not present in compressed area */
- if (unlikely(!zram->table[index].handle)) {
- pr_debug("Read before write: sector=%lu, size=%u",
- (ulong)(bio->bi_sector), bio->bi_size);
- handle_zero_page(bvec);
- return 0;
- }
-
- if (is_partial_io(bvec)) {
- /* Use a temporary buffer to decompress the page */
- uncmem = kmalloc(PAGE_SIZE, GFP_KERNEL);
- if (!uncmem) {
- pr_info("Error allocating temp memory!\n");
- return -ENOMEM;
- }
- }
-
- user_mem = kmap_atomic(page);
- if (!is_partial_io(bvec))
- uncmem = user_mem;
- clen = PAGE_SIZE;
-
- cmem = zs_map_object(zram->mem_pool, zram->table[index].handle,
- ZS_MM_RO);
-
- if (zram->table[index].size == PAGE_SIZE) {
- memcpy(uncmem, cmem, PAGE_SIZE);
- ret = LZO_E_OK;
- } else {
- ret = lzo1x_decompress_safe(cmem, zram->table[index].size,
- uncmem, &clen);
- }
-
- if (is_partial_io(bvec)) {
- memcpy(user_mem + bvec->bv_offset, uncmem + offset,
- bvec->bv_len);
- kfree(uncmem);
- }
-
- zs_unmap_object(zram->mem_pool, zram->table[index].handle);
- kunmap_atomic(user_mem);
-
- /* Should NEVER happen. Return bio error if it does. */
- if (unlikely(ret != LZO_E_OK)) {
- pr_err("Decompression failed! err=%d, page=%u\n", ret, index);
- zram_stat64_inc(zram, &zram->stats.failed_reads);
- return ret;
- }
-
- flush_dcache_page(page);
-
- return 0;
-}
-
-static int zram_read_before_write(struct zram *zram, char *mem, u32 index)
-{
- int ret;
+ int ret = LZO_E_OK;
size_t clen = PAGE_SIZE;
unsigned char *cmem;
unsigned long handle = zram->table[index].handle;
- if (zram_test_flag(zram, index, ZRAM_ZERO) || !handle) {
+ if (!handle || zram_test_flag(zram, index, ZRAM_ZERO)) {
memset(mem, 0, PAGE_SIZE);
return 0;
}
cmem = zs_map_object(zram->mem_pool, handle, ZS_MM_RO);
- ret = lzo1x_decompress_safe(cmem, zram->table[index].size,
- mem, &clen);
+ if (zram->table[index].size == PAGE_SIZE)
+ memcpy(mem, cmem, PAGE_SIZE);
+ else
+ ret = lzo1x_decompress_safe(cmem, zram->table[index].size,
+ mem, &clen);
zs_unmap_object(zram->mem_pool, handle);
/* Should NEVER happen. Return bio error if it does. */
@@ -279,6 +213,55 @@
return 0;
}
+static int zram_bvec_read(struct zram *zram, struct bio_vec *bvec,
+ u32 index, int offset, struct bio *bio)
+{
+ int ret;
+ struct page *page;
+ unsigned char *user_mem, *uncmem = NULL;
+
+ page = bvec->bv_page;
+
+ if (unlikely(!zram->table[index].handle) ||
+ zram_test_flag(zram, index, ZRAM_ZERO)) {
+ handle_zero_page(bvec);
+ return 0;
+ }
+
+ user_mem = kmap_atomic(page);
+ if (is_partial_io(bvec))
+ /* Use a temporary buffer to decompress the page */
+ uncmem = kmalloc(PAGE_SIZE, GFP_KERNEL);
+ else
+ uncmem = user_mem;
+
+ if (!uncmem) {
+ pr_info("Unable to allocate temp memory\n");
+ ret = -ENOMEM;
+ goto out_cleanup;
+ }
+
+ ret = zram_decompress_page(zram, uncmem, index);
+ /* Should NEVER happen. Return bio error if it does. */
+ if (unlikely(ret != LZO_E_OK)) {
+ pr_err("Decompression failed! err=%d, page=%u\n", ret, index);
+ zram_stat64_inc(zram, &zram->stats.failed_reads);
+ goto out_cleanup;
+ }
+
+ if (is_partial_io(bvec))
+ memcpy(user_mem + bvec->bv_offset, uncmem + offset,
+ bvec->bv_len);
+
+ flush_dcache_page(page);
+ ret = 0;
+out_cleanup:
+ kunmap_atomic(user_mem);
+ if (is_partial_io(bvec))
+ kfree(uncmem);
+ return ret;
+}
+
static int zram_bvec_write(struct zram *zram, struct bio_vec *bvec, u32 index,
int offset)
{
@@ -302,7 +285,7 @@
ret = -ENOMEM;
goto out;
}
- ret = zram_read_before_write(zram, uncmem, index);
+ ret = zram_decompress_page(zram, uncmem, index);
if (ret) {
kfree(uncmem);
goto out;
diff --git a/drivers/staging/zram/zram_drv.h b/drivers/staging/zram/zram_drv.h
index 572c0b1..df2eec4 100644
--- a/drivers/staging/zram/zram_drv.h
+++ b/drivers/staging/zram/zram_drv.h
@@ -39,8 +39,8 @@
/*
* NOTE: max_zpage_size must be less than or equal to:
- * ZS_MAX_ALLOC_SIZE - sizeof(struct zobj_header)
- * otherwise, xv_malloc() would always return failure.
+ * ZS_MAX_ALLOC_SIZE. Otherwise, zs_malloc() would
+ * always return failure.
*/
/*-- End of configurable params */
diff --git a/drivers/staging/zram/zram_sysfs.c b/drivers/staging/zram/zram_sysfs.c
index edb0ed4..de1eacf 100644
--- a/drivers/staging/zram/zram_sysfs.c
+++ b/drivers/staging/zram/zram_sysfs.c
@@ -15,6 +15,7 @@
#include <linux/device.h>
#include <linux/genhd.h>
#include <linux/mm.h>
+#include <linux/kernel.h>
#include "zram_drv.h"
@@ -54,13 +55,12 @@
static ssize_t disksize_store(struct device *dev,
struct device_attribute *attr, const char *buf, size_t len)
{
- int ret;
u64 disksize;
struct zram *zram = dev_to_zram(dev);
- ret = kstrtoull(buf, 10, &disksize);
- if (ret)
- return ret;
+ disksize = memparse(buf, NULL);
+ if (!disksize)
+ return -EINVAL;
down_write(&zram->init_lock);
if (zram->init_done) {
diff --git a/drivers/tty/amiserial.c b/drivers/tty/amiserial.c
index 42d0a25..9d7d00c 100644
--- a/drivers/tty/amiserial.c
+++ b/drivers/tty/amiserial.c
@@ -1771,6 +1771,7 @@
fail_unregister:
tty_unregister_driver(serial_driver);
fail_put_tty_driver:
+ tty_port_destroy(&state->tport);
put_tty_driver(serial_driver);
return error;
}
@@ -1785,6 +1786,7 @@
printk("SERIAL: failed to unregister serial driver (%d)\n",
error);
put_tty_driver(serial_driver);
+ tty_port_destroy(&state->tport);
free_irq(IRQ_AMIGA_TBE, state);
free_irq(IRQ_AMIGA_RBF, state);
diff --git a/drivers/tty/bfin_jtag_comm.c b/drivers/tty/bfin_jtag_comm.c
index 02b7d3a..1cfcdbf 100644
--- a/drivers/tty/bfin_jtag_comm.c
+++ b/drivers/tty/bfin_jtag_comm.c
@@ -240,8 +240,6 @@
{
int ret;
- tty_port_init(&port);
-
bfin_jc_kthread = kthread_create(bfin_jc_emudat_manager, NULL, DRV_NAME);
if (IS_ERR(bfin_jc_kthread))
return PTR_ERR(bfin_jc_kthread);
@@ -257,6 +255,8 @@
if (!bfin_jc_driver)
goto err_driver;
+ tty_port_init(&port);
+
bfin_jc_driver->driver_name = DRV_NAME;
bfin_jc_driver->name = DEV_NAME;
bfin_jc_driver->type = TTY_DRIVER_TYPE_SERIAL;
@@ -274,6 +274,7 @@
return 0;
err:
+ tty_port_destroy(&port);
put_tty_driver(bfin_jc_driver);
err_driver:
kfree(bfin_jc_write_buf.buf);
@@ -289,6 +290,7 @@
kfree(bfin_jc_write_buf.buf);
tty_unregister_driver(bfin_jc_driver);
put_tty_driver(bfin_jc_driver);
+ tty_port_destroy(&port);
}
module_exit(bfin_jc_exit);
diff --git a/drivers/tty/cyclades.c b/drivers/tty/cyclades.c
index 0a6a0bc..b09c8d1f 100644
--- a/drivers/tty/cyclades.c
+++ b/drivers/tty/cyclades.c
@@ -3099,7 +3099,7 @@
* ---------------------------------------------------------------------
*/
-static int __devinit cy_init_card(struct cyclades_card *cinfo)
+static int cy_init_card(struct cyclades_card *cinfo)
{
struct cyclades_port *info;
unsigned int channel, port;
@@ -3196,7 +3196,7 @@
/* initialize chips on Cyclom-Y card -- return number of valid
chips (which is number of ports/4) */
-static unsigned short __devinit cyy_init_card(void __iomem *true_base_addr,
+static unsigned short cyy_init_card(void __iomem *true_base_addr,
int index)
{
unsigned int chip_number;
@@ -3405,7 +3405,7 @@
} /* cy_detect_isa */
#ifdef CONFIG_PCI
-static inline int __devinit cyc_isfwstr(const char *str, unsigned int size)
+static inline int cyc_isfwstr(const char *str, unsigned int size)
{
unsigned int a;
@@ -3420,7 +3420,7 @@
return 0;
}
-static inline void __devinit cyz_fpga_copy(void __iomem *fpga, const u8 *data,
+static inline void cyz_fpga_copy(void __iomem *fpga, const u8 *data,
unsigned int size)
{
for (; size > 0; size--) {
@@ -3429,7 +3429,7 @@
}
}
-static void __devinit plx_init(struct pci_dev *pdev, int irq,
+static void plx_init(struct pci_dev *pdev, int irq,
struct RUNTIME_9060 __iomem *addr)
{
/* Reset PLX */
@@ -3449,7 +3449,7 @@
pci_write_config_byte(pdev, PCI_INTERRUPT_LINE, irq);
}
-static int __devinit __cyz_load_fw(const struct firmware *fw,
+static int __cyz_load_fw(const struct firmware *fw,
const char *name, const u32 mailbox, void __iomem *base,
void __iomem *fpga)
{
@@ -3526,7 +3526,7 @@
return 0;
}
-static int __devinit cyz_load_fw(struct pci_dev *pdev, void __iomem *base_addr,
+static int cyz_load_fw(struct pci_dev *pdev, void __iomem *base_addr,
struct RUNTIME_9060 __iomem *ctl_addr, int irq)
{
const struct firmware *fw;
@@ -3692,7 +3692,7 @@
return retval;
}
-static int __devinit cy_pci_probe(struct pci_dev *pdev,
+static int cy_pci_probe(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
struct cyclades_card *card;
@@ -3931,10 +3931,10 @@
return retval;
}
-static void __devexit cy_pci_remove(struct pci_dev *pdev)
+static void cy_pci_remove(struct pci_dev *pdev)
{
struct cyclades_card *cinfo = pci_get_drvdata(pdev);
- unsigned int i;
+ unsigned int i, channel;
/* non-Z with old PLX */
if (!cy_is_Z(cinfo) && (readb(cinfo->base_addr + CyPLX_VER) & 0x0f) ==
@@ -3960,9 +3960,11 @@
pci_release_regions(pdev);
cinfo->base_addr = NULL;
- for (i = cinfo->first_line; i < cinfo->first_line +
- cinfo->nports; i++)
+ for (channel = 0, i = cinfo->first_line; i < cinfo->first_line +
+ cinfo->nports; i++, channel++) {
tty_unregister_device(cy_serial_driver, i);
+ tty_port_destroy(&cinfo->ports[channel].port);
+ }
cinfo->nports = 0;
kfree(cinfo->ports);
}
@@ -3971,7 +3973,7 @@
.name = "cyclades",
.id_table = cy_pci_dev_id,
.probe = cy_pci_probe,
- .remove = __devexit_p(cy_pci_remove)
+ .remove = cy_pci_remove
};
#endif
diff --git a/drivers/tty/ehv_bytechan.c b/drivers/tty/ehv_bytechan.c
index 4ab936b..c117d77 100644
--- a/drivers/tty/ehv_bytechan.c
+++ b/drivers/tty/ehv_bytechan.c
@@ -699,7 +699,7 @@
.shutdown = ehv_bc_tty_port_shutdown,
};
-static int __devinit ehv_bc_tty_probe(struct platform_device *pdev)
+static int ehv_bc_tty_probe(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
struct ehv_bc_data *bc;
@@ -757,6 +757,7 @@
return 0;
error:
+ tty_port_destroy(&bc->port);
irq_dispose_mapping(bc->tx_irq);
irq_dispose_mapping(bc->rx_irq);
@@ -770,6 +771,7 @@
tty_unregister_device(ehv_bc_driver, bc - bcs);
+ tty_port_destroy(&bc->port);
irq_dispose_mapping(bc->tx_irq);
irq_dispose_mapping(bc->rx_irq);
diff --git a/drivers/tty/hvc/hvc_opal.c b/drivers/tty/hvc/hvc_opal.c
index 0d2ea0c..be1a9a1 100644
--- a/drivers/tty/hvc/hvc_opal.c
+++ b/drivers/tty/hvc/hvc_opal.c
@@ -41,7 +41,7 @@
static const char hvc_opal_name[] = "hvc_opal";
-static struct of_device_id hvc_opal_match[] __devinitdata = {
+static struct of_device_id hvc_opal_match[] = {
{ .name = "serial", .compatible = "ibm,opal-console-raw" },
{ .name = "serial", .compatible = "ibm,opal-console-hvsi" },
{ },
@@ -161,7 +161,7 @@
.tiocmset = hvc_opal_hvsi_tiocmset,
};
-static int __devinit hvc_opal_probe(struct platform_device *dev)
+static int hvc_opal_probe(struct platform_device *dev)
{
const struct hv_ops *ops;
struct hvc_struct *hp;
@@ -222,7 +222,7 @@
return 0;
}
-static int __devexit hvc_opal_remove(struct platform_device *dev)
+static int hvc_opal_remove(struct platform_device *dev)
{
struct hvc_struct *hp = dev_get_drvdata(&dev->dev);
int rc, termno;
@@ -239,7 +239,7 @@
static struct platform_driver hvc_opal_driver = {
.probe = hvc_opal_probe,
- .remove = __devexit_p(hvc_opal_remove),
+ .remove = hvc_opal_remove,
.driver = {
.name = hvc_opal_name,
.owner = THIS_MODULE,
diff --git a/drivers/tty/hvc/hvc_vio.c b/drivers/tty/hvc/hvc_vio.c
index 070c0ee6..ed6f5f1 100644
--- a/drivers/tty/hvc/hvc_vio.c
+++ b/drivers/tty/hvc/hvc_vio.c
@@ -53,7 +53,7 @@
static const char hvc_driver_name[] = "hvc_console";
-static struct vio_device_id hvc_driver_table[] __devinitdata = {
+static struct vio_device_id hvc_driver_table[] = {
{"serial", "hvterm1"},
#ifndef HVC_OLD_HVSI
{"serial", "hvterm-protocol"},
@@ -293,7 +293,7 @@
}
}
-static int __devinit hvc_vio_probe(struct vio_dev *vdev,
+static int hvc_vio_probe(struct vio_dev *vdev,
const struct vio_device_id *id)
{
const struct hv_ops *ops;
@@ -362,7 +362,7 @@
return 0;
}
-static int __devexit hvc_vio_remove(struct vio_dev *vdev)
+static int hvc_vio_remove(struct vio_dev *vdev)
{
struct hvc_struct *hp = dev_get_drvdata(&vdev->dev);
int rc, termno;
diff --git a/drivers/tty/hvc/hvc_xen.c b/drivers/tty/hvc/hvc_xen.c
index f4abfe2..19843ec 100644
--- a/drivers/tty/hvc/hvc_xen.c
+++ b/drivers/tty/hvc/hvc_xen.c
@@ -422,7 +422,7 @@
return ret;
}
-static int __devinit xencons_probe(struct xenbus_device *dev,
+static int xencons_probe(struct xenbus_device *dev,
const struct xenbus_device_id *id)
{
int ret, devid;
diff --git a/drivers/tty/hvc/hvcs.c b/drivers/tty/hvc/hvcs.c
index cab5c7a..8776357 100644
--- a/drivers/tty/hvc/hvcs.c
+++ b/drivers/tty/hvc/hvcs.c
@@ -330,12 +330,12 @@
static void hvcs_close(struct tty_struct *tty, struct file *filp);
static void hvcs_hangup(struct tty_struct * tty);
-static int __devinit hvcs_probe(struct vio_dev *dev,
+static int hvcs_probe(struct vio_dev *dev,
const struct vio_device_id *id);
-static int __devexit hvcs_remove(struct vio_dev *dev);
+static int hvcs_remove(struct vio_dev *dev);
static int __init hvcs_module_init(void);
static void __exit hvcs_module_exit(void);
-static int __devinit hvcs_initialize(void);
+static int hvcs_initialize(void);
#define HVCS_SCHED_READ 0x00000001
#define HVCS_QUICK_READ 0x00000002
@@ -676,7 +676,7 @@
return 0;
}
-static struct vio_device_id hvcs_driver_table[] __devinitdata= {
+static struct vio_device_id hvcs_driver_table[] = {
{"serial-server", "hvterm2"},
{ "", "" }
};
@@ -756,7 +756,7 @@
return -1;
}
-static int __devinit hvcs_probe(
+static int hvcs_probe(
struct vio_dev *dev,
const struct vio_device_id *id)
{
@@ -835,7 +835,7 @@
return 0;
}
-static int __devexit hvcs_remove(struct vio_dev *dev)
+static int hvcs_remove(struct vio_dev *dev)
{
struct hvcs_struct *hvcsd = dev_get_drvdata(&dev->dev);
unsigned long flags;
@@ -874,7 +874,7 @@
static struct vio_driver hvcs_vio_driver = {
.id_table = hvcs_driver_table,
.probe = hvcs_probe,
- .remove = __devexit_p(hvcs_remove),
+ .remove = hvcs_remove,
.name = hvcs_driver_name,
};
@@ -1478,7 +1478,7 @@
hvcs_index_count = 0;
}
-static int __devinit hvcs_initialize(void)
+static int hvcs_initialize(void)
{
int rc, num_ttys_to_alloc;
@@ -1496,8 +1496,10 @@
num_ttys_to_alloc = hvcs_parm_num_devs;
hvcs_tty_driver = alloc_tty_driver(num_ttys_to_alloc);
- if (!hvcs_tty_driver)
+ if (!hvcs_tty_driver) {
+ mutex_unlock(&hvcs_init_mutex);
return -ENOMEM;
+ }
if (hvcs_alloc_index_list(num_ttys_to_alloc)) {
rc = -ENOMEM;
diff --git a/drivers/tty/hvc/hvsi.c b/drivers/tty/hvc/hvsi.c
index 5b95b4f..68357a6 100644
--- a/drivers/tty/hvc/hvsi.c
+++ b/drivers/tty/hvc/hvsi.c
@@ -1218,6 +1218,7 @@
if (hp->virq == 0) {
printk(KERN_ERR "%s: couldn't create irq mapping for 0x%x\n",
__func__, irq[0]);
+ tty_port_destroy(&hp->port);
continue;
}
diff --git a/drivers/tty/ipwireless/network.c b/drivers/tty/ipwireless/network.c
index 57102e6..c0dfb64 100644
--- a/drivers/tty/ipwireless/network.c
+++ b/drivers/tty/ipwireless/network.c
@@ -352,6 +352,8 @@
}
skb = dev_alloc_skb(length + 4);
+ if (skb == NULL)
+ return NULL;
skb_reserve(skb, 2);
memcpy(skb_put(skb, length), data, length);
@@ -397,7 +399,8 @@
/* Send the data to the ppp_generic module. */
skb = ipw_packet_received_skb(data, length);
- ppp_input(network->ppp_channel, skb);
+ if (skb)
+ ppp_input(network->ppp_channel, skb);
} else
spin_unlock_irqrestore(&network->lock,
flags);
diff --git a/drivers/tty/ipwireless/tty.c b/drivers/tty/ipwireless/tty.c
index 160f0ad..2cde13d 100644
--- a/drivers/tty/ipwireless/tty.c
+++ b/drivers/tty/ipwireless/tty.c
@@ -566,6 +566,7 @@
ipwireless_disassociate_network_ttys(network,
ttyj->channel_idx);
tty_unregister_device(ipw_tty_driver, j);
+ tty_port_destroy(&ttyj->port);
ttys[j] = NULL;
mutex_unlock(&ttyj->ipw_tty_mutex);
kfree(ttyj);
diff --git a/drivers/tty/isicom.c b/drivers/tty/isicom.c
index d7492e1..3205b2e 100644
--- a/drivers/tty/isicom.c
+++ b/drivers/tty/isicom.c
@@ -148,7 +148,7 @@
#endif
static int isicom_probe(struct pci_dev *, const struct pci_device_id *);
-static void __devexit isicom_remove(struct pci_dev *);
+static void isicom_remove(struct pci_dev *);
static struct pci_device_id isicom_pci_tbl[] = {
{ PCI_DEVICE(VENDOR_ID, 0x2028) },
@@ -168,7 +168,7 @@
.name = "isicom",
.id_table = isicom_pci_tbl,
.probe = isicom_probe,
- .remove = __devexit_p(isicom_remove)
+ .remove = isicom_remove
};
static int prev_card = 3; /* start servicing isi_card[0] */
@@ -603,7 +603,7 @@
if (tty_port_cts_enabled(&port->port)) {
if (tty->hw_stopped) {
if (header & ISI_CTS) {
- port->port.tty->hw_stopped = 0;
+ tty->hw_stopped = 0;
/* start tx ing */
port->status |= (ISI_TXOK
| ISI_CTS);
@@ -1307,7 +1307,7 @@
.shutdown = isicom_shutdown,
};
-static int __devinit reset_card(struct pci_dev *pdev,
+static int reset_card(struct pci_dev *pdev,
const unsigned int card, unsigned int *signature)
{
struct isi_board *board = pci_get_drvdata(pdev);
@@ -1368,7 +1368,7 @@
return retval;
}
-static int __devinit load_firmware(struct pci_dev *pdev,
+static int load_firmware(struct pci_dev *pdev,
const unsigned int index, const unsigned int signature)
{
struct isi_board *board = pci_get_drvdata(pdev);
@@ -1548,7 +1548,7 @@
*/
static unsigned int card_count;
-static int __devinit isicom_probe(struct pci_dev *pdev,
+static int isicom_probe(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
unsigned int uninitialized_var(signature), index;
@@ -1610,10 +1610,15 @@
if (retval < 0)
goto errunri;
- for (index = 0; index < board->port_count; index++)
- tty_port_register_device(&board->ports[index].port,
- isicom_normal, board->index * 16 + index,
- &pdev->dev);
+ for (index = 0; index < board->port_count; index++) {
+ struct tty_port *tport = &board->ports[index].port;
+ tty_port_init(tport);
+ tport->ops = &isicom_port_ops;
+ tport->close_delay = 50 * HZ/100;
+ tport->closing_wait = 3000 * HZ/100;
+ tty_port_register_device(tport, isicom_normal,
+ board->index * 16 + index, &pdev->dev);
+ }
return 0;
@@ -1630,13 +1635,15 @@
return retval;
}
-static void __devexit isicom_remove(struct pci_dev *pdev)
+static void isicom_remove(struct pci_dev *pdev)
{
struct isi_board *board = pci_get_drvdata(pdev);
unsigned int i;
- for (i = 0; i < board->port_count; i++)
+ for (i = 0; i < board->port_count; i++) {
tty_unregister_device(isicom_normal, board->index * 16 + i);
+ tty_port_destroy(&board->ports[i].port);
+ }
free_irq(board->irq, board);
pci_release_region(pdev, 3);
@@ -1655,13 +1662,9 @@
isi_card[idx].ports = port;
spin_lock_init(&isi_card[idx].card_lock);
for (channel = 0; channel < 16; channel++, port++) {
- tty_port_init(&port->port);
- port->port.ops = &isicom_port_ops;
port->magic = ISICOM_MAGIC;
port->card = &isi_card[idx];
port->channel = channel;
- port->port.close_delay = 50 * HZ/100;
- port->port.closing_wait = 3000 * HZ/100;
port->status = 0;
/* . . . */
}
diff --git a/drivers/tty/moxa.c b/drivers/tty/moxa.c
index 56e616b..f9d2850 100644
--- a/drivers/tty/moxa.c
+++ b/drivers/tty/moxa.c
@@ -895,6 +895,8 @@
return 0;
err_free:
+ for (i = 0; i < MAX_PORTS_PER_BOARD; i++)
+ tty_port_destroy(&brd->ports[i].port);
kfree(brd->ports);
err:
return ret;
@@ -919,6 +921,8 @@
tty_kref_put(tty);
}
}
+ for (a = 0; a < MAX_PORTS_PER_BOARD; a++)
+ tty_port_destroy(&brd->ports[a].port);
while (1) {
opened = 0;
for (a = 0; a < brd->numPorts; a++)
@@ -941,7 +945,7 @@
}
#ifdef CONFIG_PCI
-static int __devinit moxa_pci_probe(struct pci_dev *pdev,
+static int moxa_pci_probe(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
struct moxa_board_conf *board;
@@ -1016,7 +1020,7 @@
return retval;
}
-static void __devexit moxa_pci_remove(struct pci_dev *pdev)
+static void moxa_pci_remove(struct pci_dev *pdev)
{
struct moxa_board_conf *brd = pci_get_drvdata(pdev);
@@ -1029,7 +1033,7 @@
.name = "moxa",
.id_table = moxa_pcibrds,
.probe = moxa_pci_probe,
- .remove = __devexit_p(moxa_pci_remove)
+ .remove = moxa_pci_remove
};
#endif /* CONFIG_PCI */
@@ -1370,7 +1374,7 @@
p->DCDState = dcd;
spin_unlock_irqrestore(&p->port.lock, flags);
tty = tty_port_tty_get(&p->port);
- if (tty && C_CLOCAL(tty) && !dcd)
+ if (tty && !C_CLOCAL(tty) && !dcd)
tty_hangup(tty);
tty_kref_put(tty);
}
diff --git a/drivers/tty/mxser.c b/drivers/tty/mxser.c
index cfda47d..4011386 100644
--- a/drivers/tty/mxser.c
+++ b/drivers/tty/mxser.c
@@ -487,7 +487,7 @@
}
#ifdef CONFIG_PCI
-static int __devinit CheckIsMoxaMust(unsigned long io)
+static int CheckIsMoxaMust(unsigned long io)
{
u8 oldmcr, hwid;
int i;
@@ -2369,7 +2369,7 @@
mxser_release_vector(brd);
}
-static int __devinit mxser_initbrd(struct mxser_board *brd,
+static int mxser_initbrd(struct mxser_board *brd,
struct pci_dev *pdev)
{
struct mxser_port *info;
@@ -2411,14 +2411,27 @@
retval = request_irq(brd->irq, mxser_interrupt, IRQF_SHARED, "mxser",
brd);
- if (retval)
+ if (retval) {
+ for (i = 0; i < brd->info->nports; i++)
+ tty_port_destroy(&brd->ports[i].port);
printk(KERN_ERR "Board %s: Request irq failed, IRQ (%d) may "
"conflict with another device.\n",
brd->info->name, brd->irq);
+ }
return retval;
}
+static void mxser_board_remove(struct mxser_board *brd)
+{
+ unsigned int i;
+
+ for (i = 0; i < brd->info->nports; i++) {
+ tty_unregister_device(mxvar_sdriver, brd->idx + i);
+ tty_port_destroy(&brd->ports[i].port);
+ }
+}
+
static int __init mxser_get_ISA_conf(int cap, struct mxser_board *brd)
{
int id, i, bits, ret;
@@ -2534,7 +2547,7 @@
return -EIO;
}
-static int __devinit mxser_probe(struct pci_dev *pdev,
+static int mxser_probe(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
#ifdef CONFIG_PCI
@@ -2645,14 +2658,12 @@
#endif
}
-static void __devexit mxser_remove(struct pci_dev *pdev)
+static void mxser_remove(struct pci_dev *pdev)
{
#ifdef CONFIG_PCI
struct mxser_board *brd = pci_get_drvdata(pdev);
- unsigned int i;
- for (i = 0; i < brd->info->nports; i++)
- tty_unregister_device(mxvar_sdriver, brd->idx + i);
+ mxser_board_remove(brd);
free_irq(pdev->irq, brd);
pci_release_region(pdev, 2);
@@ -2666,7 +2677,7 @@
.name = "mxser",
.id_table = mxser_pcibrds,
.probe = mxser_probe,
- .remove = __devexit_p(mxser_remove)
+ .remove = mxser_remove
};
static int __init mxser_module_init(void)
@@ -2748,15 +2759,13 @@
static void __exit mxser_module_exit(void)
{
- unsigned int i, j;
+ unsigned int i;
pci_unregister_driver(&mxser_driver);
for (i = 0; i < MXSER_BOARDS; i++) /* ISA remains */
if (mxser_boards[i].info != NULL)
- for (j = 0; j < mxser_boards[i].info->nports; j++)
- tty_unregister_device(mxvar_sdriver,
- mxser_boards[i].idx + j);
+ mxser_board_remove(&mxser_boards[i]);
tty_unregister_driver(mxvar_sdriver);
put_tty_driver(mxvar_sdriver);
diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c
index 1e8e8ce..dcc0430 100644
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -134,7 +134,6 @@
#define DLCI_OPENING 1 /* Sending SABM not seen UA */
#define DLCI_OPEN 2 /* SABM/UA complete */
#define DLCI_CLOSING 3 /* Sending DISC not seen UA/DM */
- struct kref ref; /* freed from port or mux close */
struct mutex mutex;
/* Link layer */
@@ -1635,7 +1634,6 @@
if (dlci == NULL)
return NULL;
spin_lock_init(&dlci->lock);
- kref_init(&dlci->ref);
mutex_init(&dlci->mutex);
dlci->fifo = &dlci->_fifo;
if (kfifo_alloc(&dlci->_fifo, 4096, GFP_KERNEL) < 0) {
@@ -1669,9 +1667,9 @@
*
* Can sleep.
*/
-static void gsm_dlci_free(struct kref *ref)
+static void gsm_dlci_free(struct tty_port *port)
{
- struct gsm_dlci *dlci = container_of(ref, struct gsm_dlci, ref);
+ struct gsm_dlci *dlci = container_of(port, struct gsm_dlci, port);
del_timer_sync(&dlci->t1);
dlci->gsm->dlci[dlci->addr] = NULL;
@@ -1683,12 +1681,12 @@
static inline void dlci_get(struct gsm_dlci *dlci)
{
- kref_get(&dlci->ref);
+ tty_port_get(&dlci->port);
}
static inline void dlci_put(struct gsm_dlci *dlci)
{
- kref_put(&dlci->ref, gsm_dlci_free);
+ tty_port_put(&dlci->port);
}
/**
@@ -2874,6 +2872,7 @@
static const struct tty_port_operations gsm_port_ops = {
.carrier_raised = gsm_carrier_raised,
.dtr_rts = gsm_dtr_rts,
+ .destruct = gsm_dlci_free,
};
static int gsmtty_install(struct tty_driver *driver, struct tty_struct *tty)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 8c0b7b4..19083ef 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -73,10 +73,42 @@
#define ECHO_OP_SET_CANON_COL 0x81
#define ECHO_OP_ERASE_TAB 0x82
+struct n_tty_data {
+ unsigned int column;
+ unsigned long overrun_time;
+ int num_overrun;
+
+ unsigned char lnext:1, erasing:1, raw:1, real_raw:1, icanon:1;
+ unsigned char echo_overrun:1;
+
+ DECLARE_BITMAP(process_char_map, 256);
+ DECLARE_BITMAP(read_flags, N_TTY_BUF_SIZE);
+
+ char *read_buf;
+ int read_head;
+ int read_tail;
+ int read_cnt;
+
+ unsigned char *echo_buf;
+ unsigned int echo_pos;
+ unsigned int echo_cnt;
+
+ int canon_data;
+ unsigned long canon_head;
+ unsigned int canon_column;
+
+ struct mutex atomic_read_lock;
+ struct mutex output_lock;
+ struct mutex echo_lock;
+ spinlock_t read_lock;
+};
+
static inline int tty_put_user(struct tty_struct *tty, unsigned char x,
unsigned char __user *ptr)
{
- tty_audit_add_data(tty, &x, 1);
+ struct n_tty_data *ldata = tty->disc_data;
+
+ tty_audit_add_data(tty, &x, 1, ldata->icanon);
return put_user(x, ptr);
}
@@ -92,17 +124,18 @@
static void n_tty_set_room(struct tty_struct *tty)
{
+ struct n_tty_data *ldata = tty->disc_data;
int left;
int old_left;
- /* tty->read_cnt is not read locked ? */
+ /* ldata->read_cnt is not read locked ? */
if (I_PARMRK(tty)) {
/* Multiply read_cnt by 3, since each byte might take up to
* three times as many spaces when PARMRK is set (depending on
* its flags, e.g. parity error). */
- left = N_TTY_BUF_SIZE - tty->read_cnt * 3 - 1;
+ left = N_TTY_BUF_SIZE - ldata->read_cnt * 3 - 1;
} else
- left = N_TTY_BUF_SIZE - tty->read_cnt - 1;
+ left = N_TTY_BUF_SIZE - ldata->read_cnt - 1;
/*
* If we are doing input canonicalization, and there are no
@@ -111,44 +144,47 @@
* characters will be beeped.
*/
if (left <= 0)
- left = tty->icanon && !tty->canon_data;
+ left = ldata->icanon && !ldata->canon_data;
old_left = tty->receive_room;
tty->receive_room = left;
/* Did this open up the receive buffer? We may need to flip */
- if (left && !old_left)
- schedule_work(&tty->buf.work);
+ if (left && !old_left) {
+ WARN_RATELIMIT(tty->port->itty == NULL,
+ "scheduling with invalid itty\n");
+ schedule_work(&tty->port->buf.work);
+ }
}
-static void put_tty_queue_nolock(unsigned char c, struct tty_struct *tty)
+static void put_tty_queue_nolock(unsigned char c, struct n_tty_data *ldata)
{
- if (tty->read_cnt < N_TTY_BUF_SIZE) {
- tty->read_buf[tty->read_head] = c;
- tty->read_head = (tty->read_head + 1) & (N_TTY_BUF_SIZE-1);
- tty->read_cnt++;
+ if (ldata->read_cnt < N_TTY_BUF_SIZE) {
+ ldata->read_buf[ldata->read_head] = c;
+ ldata->read_head = (ldata->read_head + 1) & (N_TTY_BUF_SIZE-1);
+ ldata->read_cnt++;
}
}
/**
* put_tty_queue - add character to tty
* @c: character
- * @tty: tty device
+ * @ldata: n_tty data
*
* Add a character to the tty read_buf queue. This is done under the
* read_lock to serialize character addition and also to protect us
* against parallel reads or flushes
*/
-static void put_tty_queue(unsigned char c, struct tty_struct *tty)
+static void put_tty_queue(unsigned char c, struct n_tty_data *ldata)
{
unsigned long flags;
/*
* The problem of stomping on the buffers ends here.
* Why didn't anyone see this one coming? --AJK
*/
- spin_lock_irqsave(&tty->read_lock, flags);
- put_tty_queue_nolock(c, tty);
- spin_unlock_irqrestore(&tty->read_lock, flags);
+ spin_lock_irqsave(&ldata->read_lock, flags);
+ put_tty_queue_nolock(c, ldata);
+ spin_unlock_irqrestore(&ldata->read_lock, flags);
}
/**
@@ -179,18 +215,19 @@
static void reset_buffer_flags(struct tty_struct *tty)
{
+ struct n_tty_data *ldata = tty->disc_data;
unsigned long flags;
- spin_lock_irqsave(&tty->read_lock, flags);
- tty->read_head = tty->read_tail = tty->read_cnt = 0;
- spin_unlock_irqrestore(&tty->read_lock, flags);
+ spin_lock_irqsave(&ldata->read_lock, flags);
+ ldata->read_head = ldata->read_tail = ldata->read_cnt = 0;
+ spin_unlock_irqrestore(&ldata->read_lock, flags);
- mutex_lock(&tty->echo_lock);
- tty->echo_pos = tty->echo_cnt = tty->echo_overrun = 0;
- mutex_unlock(&tty->echo_lock);
+ mutex_lock(&ldata->echo_lock);
+ ldata->echo_pos = ldata->echo_cnt = ldata->echo_overrun = 0;
+ mutex_unlock(&ldata->echo_lock);
- tty->canon_head = tty->canon_data = tty->erasing = 0;
- memset(&tty->read_flags, 0, sizeof tty->read_flags);
+ ldata->canon_head = ldata->canon_data = ldata->erasing = 0;
+ bitmap_zero(ldata->read_flags, N_TTY_BUF_SIZE);
n_tty_set_room(tty);
}
@@ -235,18 +272,19 @@
static ssize_t n_tty_chars_in_buffer(struct tty_struct *tty)
{
+ struct n_tty_data *ldata = tty->disc_data;
unsigned long flags;
ssize_t n = 0;
- spin_lock_irqsave(&tty->read_lock, flags);
- if (!tty->icanon) {
- n = tty->read_cnt;
- } else if (tty->canon_data) {
- n = (tty->canon_head > tty->read_tail) ?
- tty->canon_head - tty->read_tail :
- tty->canon_head + (N_TTY_BUF_SIZE - tty->read_tail);
+ spin_lock_irqsave(&ldata->read_lock, flags);
+ if (!ldata->icanon) {
+ n = ldata->read_cnt;
+ } else if (ldata->canon_data) {
+ n = (ldata->canon_head > ldata->read_tail) ?
+ ldata->canon_head - ldata->read_tail :
+ ldata->canon_head + (N_TTY_BUF_SIZE - ldata->read_tail);
}
- spin_unlock_irqrestore(&tty->read_lock, flags);
+ spin_unlock_irqrestore(&ldata->read_lock, flags);
return n;
}
@@ -301,6 +339,7 @@
static int do_output_char(unsigned char c, struct tty_struct *tty, int space)
{
+ struct n_tty_data *ldata = tty->disc_data;
int spaces;
if (!space)
@@ -309,48 +348,48 @@
switch (c) {
case '\n':
if (O_ONLRET(tty))
- tty->column = 0;
+ ldata->column = 0;
if (O_ONLCR(tty)) {
if (space < 2)
return -1;
- tty->canon_column = tty->column = 0;
+ ldata->canon_column = ldata->column = 0;
tty->ops->write(tty, "\r\n", 2);
return 2;
}
- tty->canon_column = tty->column;
+ ldata->canon_column = ldata->column;
break;
case '\r':
- if (O_ONOCR(tty) && tty->column == 0)
+ if (O_ONOCR(tty) && ldata->column == 0)
return 0;
if (O_OCRNL(tty)) {
c = '\n';
if (O_ONLRET(tty))
- tty->canon_column = tty->column = 0;
+ ldata->canon_column = ldata->column = 0;
break;
}
- tty->canon_column = tty->column = 0;
+ ldata->canon_column = ldata->column = 0;
break;
case '\t':
- spaces = 8 - (tty->column & 7);
+ spaces = 8 - (ldata->column & 7);
if (O_TABDLY(tty) == XTABS) {
if (space < spaces)
return -1;
- tty->column += spaces;
+ ldata->column += spaces;
tty->ops->write(tty, " ", spaces);
return spaces;
}
- tty->column += spaces;
+ ldata->column += spaces;
break;
case '\b':
- if (tty->column > 0)
- tty->column--;
+ if (ldata->column > 0)
+ ldata->column--;
break;
default:
if (!iscntrl(c)) {
if (O_OLCUC(tty))
c = toupper(c);
if (!is_continuation(c, tty))
- tty->column++;
+ ldata->column++;
}
break;
}
@@ -375,14 +414,15 @@
static int process_output(unsigned char c, struct tty_struct *tty)
{
+ struct n_tty_data *ldata = tty->disc_data;
int space, retval;
- mutex_lock(&tty->output_lock);
+ mutex_lock(&ldata->output_lock);
space = tty_write_room(tty);
retval = do_output_char(c, tty, space);
- mutex_unlock(&tty->output_lock);
+ mutex_unlock(&ldata->output_lock);
if (retval < 0)
return -1;
else
@@ -411,15 +451,16 @@
static ssize_t process_output_block(struct tty_struct *tty,
const unsigned char *buf, unsigned int nr)
{
+ struct n_tty_data *ldata = tty->disc_data;
int space;
int i;
const unsigned char *cp;
- mutex_lock(&tty->output_lock);
+ mutex_lock(&ldata->output_lock);
space = tty_write_room(tty);
if (!space) {
- mutex_unlock(&tty->output_lock);
+ mutex_unlock(&ldata->output_lock);
return 0;
}
if (nr > space)
@@ -431,30 +472,30 @@
switch (c) {
case '\n':
if (O_ONLRET(tty))
- tty->column = 0;
+ ldata->column = 0;
if (O_ONLCR(tty))
goto break_out;
- tty->canon_column = tty->column;
+ ldata->canon_column = ldata->column;
break;
case '\r':
- if (O_ONOCR(tty) && tty->column == 0)
+ if (O_ONOCR(tty) && ldata->column == 0)
goto break_out;
if (O_OCRNL(tty))
goto break_out;
- tty->canon_column = tty->column = 0;
+ ldata->canon_column = ldata->column = 0;
break;
case '\t':
goto break_out;
case '\b':
- if (tty->column > 0)
- tty->column--;
+ if (ldata->column > 0)
+ ldata->column--;
break;
default:
if (!iscntrl(c)) {
if (O_OLCUC(tty))
goto break_out;
if (!is_continuation(c, tty))
- tty->column++;
+ ldata->column++;
}
break;
}
@@ -462,7 +503,7 @@
break_out:
i = tty->ops->write(tty, buf, i);
- mutex_unlock(&tty->output_lock);
+ mutex_unlock(&ldata->output_lock);
return i;
}
@@ -494,21 +535,22 @@
static void process_echoes(struct tty_struct *tty)
{
+ struct n_tty_data *ldata = tty->disc_data;
int space, nr;
unsigned char c;
unsigned char *cp, *buf_end;
- if (!tty->echo_cnt)
+ if (!ldata->echo_cnt)
return;
- mutex_lock(&tty->output_lock);
- mutex_lock(&tty->echo_lock);
+ mutex_lock(&ldata->output_lock);
+ mutex_lock(&ldata->echo_lock);
space = tty_write_room(tty);
- buf_end = tty->echo_buf + N_TTY_BUF_SIZE;
- cp = tty->echo_buf + tty->echo_pos;
- nr = tty->echo_cnt;
+ buf_end = ldata->echo_buf + N_TTY_BUF_SIZE;
+ cp = ldata->echo_buf + ldata->echo_pos;
+ nr = ldata->echo_cnt;
while (nr > 0) {
c = *cp;
if (c == ECHO_OP_START) {
@@ -545,7 +587,7 @@
* Otherwise, tab spacing is normal.
*/
if (!(num_chars & 0x80))
- num_chars += tty->canon_column;
+ num_chars += ldata->canon_column;
num_bs = 8 - (num_chars & 7);
if (num_bs > space) {
@@ -555,22 +597,22 @@
space -= num_bs;
while (num_bs--) {
tty_put_char(tty, '\b');
- if (tty->column > 0)
- tty->column--;
+ if (ldata->column > 0)
+ ldata->column--;
}
cp += 3;
nr -= 3;
break;
case ECHO_OP_SET_CANON_COL:
- tty->canon_column = tty->column;
+ ldata->canon_column = ldata->column;
cp += 2;
nr -= 2;
break;
case ECHO_OP_MOVE_BACK_COL:
- if (tty->column > 0)
- tty->column--;
+ if (ldata->column > 0)
+ ldata->column--;
cp += 2;
nr -= 2;
break;
@@ -582,7 +624,7 @@
break;
}
tty_put_char(tty, ECHO_OP_START);
- tty->column++;
+ ldata->column++;
space--;
cp += 2;
nr -= 2;
@@ -604,7 +646,7 @@
}
tty_put_char(tty, '^');
tty_put_char(tty, op ^ 0100);
- tty->column += 2;
+ ldata->column += 2;
space -= 2;
cp += 2;
nr -= 2;
@@ -635,20 +677,20 @@
}
if (nr == 0) {
- tty->echo_pos = 0;
- tty->echo_cnt = 0;
- tty->echo_overrun = 0;
+ ldata->echo_pos = 0;
+ ldata->echo_cnt = 0;
+ ldata->echo_overrun = 0;
} else {
- int num_processed = tty->echo_cnt - nr;
- tty->echo_pos += num_processed;
- tty->echo_pos &= N_TTY_BUF_SIZE - 1;
- tty->echo_cnt = nr;
+ int num_processed = ldata->echo_cnt - nr;
+ ldata->echo_pos += num_processed;
+ ldata->echo_pos &= N_TTY_BUF_SIZE - 1;
+ ldata->echo_cnt = nr;
if (num_processed > 0)
- tty->echo_overrun = 0;
+ ldata->echo_overrun = 0;
}
- mutex_unlock(&tty->echo_lock);
- mutex_unlock(&tty->output_lock);
+ mutex_unlock(&ldata->echo_lock);
+ mutex_unlock(&ldata->output_lock);
if (tty->ops->flush_chars)
tty->ops->flush_chars(tty);
@@ -657,72 +699,70 @@
/**
* add_echo_byte - add a byte to the echo buffer
* @c: unicode byte to echo
- * @tty: terminal device
+ * @ldata: n_tty data
*
* Add a character or operation byte to the echo buffer.
*
* Should be called under the echo lock to protect the echo buffer.
*/
-static void add_echo_byte(unsigned char c, struct tty_struct *tty)
+static void add_echo_byte(unsigned char c, struct n_tty_data *ldata)
{
int new_byte_pos;
- if (tty->echo_cnt == N_TTY_BUF_SIZE) {
+ if (ldata->echo_cnt == N_TTY_BUF_SIZE) {
/* Circular buffer is already at capacity */
- new_byte_pos = tty->echo_pos;
+ new_byte_pos = ldata->echo_pos;
/*
* Since the buffer start position needs to be advanced,
* be sure to step by a whole operation byte group.
*/
- if (tty->echo_buf[tty->echo_pos] == ECHO_OP_START) {
- if (tty->echo_buf[(tty->echo_pos + 1) &
+ if (ldata->echo_buf[ldata->echo_pos] == ECHO_OP_START) {
+ if (ldata->echo_buf[(ldata->echo_pos + 1) &
(N_TTY_BUF_SIZE - 1)] ==
ECHO_OP_ERASE_TAB) {
- tty->echo_pos += 3;
- tty->echo_cnt -= 2;
+ ldata->echo_pos += 3;
+ ldata->echo_cnt -= 2;
} else {
- tty->echo_pos += 2;
- tty->echo_cnt -= 1;
+ ldata->echo_pos += 2;
+ ldata->echo_cnt -= 1;
}
} else {
- tty->echo_pos++;
+ ldata->echo_pos++;
}
- tty->echo_pos &= N_TTY_BUF_SIZE - 1;
+ ldata->echo_pos &= N_TTY_BUF_SIZE - 1;
- tty->echo_overrun = 1;
+ ldata->echo_overrun = 1;
} else {
- new_byte_pos = tty->echo_pos + tty->echo_cnt;
+ new_byte_pos = ldata->echo_pos + ldata->echo_cnt;
new_byte_pos &= N_TTY_BUF_SIZE - 1;
- tty->echo_cnt++;
+ ldata->echo_cnt++;
}
- tty->echo_buf[new_byte_pos] = c;
+ ldata->echo_buf[new_byte_pos] = c;
}
/**
* echo_move_back_col - add operation to move back a column
- * @tty: terminal device
+ * @ldata: n_tty data
*
* Add an operation to the echo buffer to move back one column.
*
* Locking: echo_lock to protect the echo buffer
*/
-static void echo_move_back_col(struct tty_struct *tty)
+static void echo_move_back_col(struct n_tty_data *ldata)
{
- mutex_lock(&tty->echo_lock);
-
- add_echo_byte(ECHO_OP_START, tty);
- add_echo_byte(ECHO_OP_MOVE_BACK_COL, tty);
-
- mutex_unlock(&tty->echo_lock);
+ mutex_lock(&ldata->echo_lock);
+ add_echo_byte(ECHO_OP_START, ldata);
+ add_echo_byte(ECHO_OP_MOVE_BACK_COL, ldata);
+ mutex_unlock(&ldata->echo_lock);
}
/**
* echo_set_canon_col - add operation to set the canon column
- * @tty: terminal device
+ * @ldata: n_tty data
*
* Add an operation to the echo buffer to set the canon column
* to the current column.
@@ -730,21 +770,19 @@
* Locking: echo_lock to protect the echo buffer
*/
-static void echo_set_canon_col(struct tty_struct *tty)
+static void echo_set_canon_col(struct n_tty_data *ldata)
{
- mutex_lock(&tty->echo_lock);
-
- add_echo_byte(ECHO_OP_START, tty);
- add_echo_byte(ECHO_OP_SET_CANON_COL, tty);
-
- mutex_unlock(&tty->echo_lock);
+ mutex_lock(&ldata->echo_lock);
+ add_echo_byte(ECHO_OP_START, ldata);
+ add_echo_byte(ECHO_OP_SET_CANON_COL, ldata);
+ mutex_unlock(&ldata->echo_lock);
}
/**
* echo_erase_tab - add operation to erase a tab
* @num_chars: number of character columns already used
* @after_tab: true if num_chars starts after a previous tab
- * @tty: terminal device
+ * @ldata: n_tty data
*
* Add an operation to the echo buffer to erase a tab.
*
@@ -758,12 +796,12 @@
*/
static void echo_erase_tab(unsigned int num_chars, int after_tab,
- struct tty_struct *tty)
+ struct n_tty_data *ldata)
{
- mutex_lock(&tty->echo_lock);
+ mutex_lock(&ldata->echo_lock);
- add_echo_byte(ECHO_OP_START, tty);
- add_echo_byte(ECHO_OP_ERASE_TAB, tty);
+ add_echo_byte(ECHO_OP_START, ldata);
+ add_echo_byte(ECHO_OP_ERASE_TAB, ldata);
/* We only need to know this modulo 8 (tab spacing) */
num_chars &= 7;
@@ -772,9 +810,9 @@
if (after_tab)
num_chars |= 0x80;
- add_echo_byte(num_chars, tty);
+ add_echo_byte(num_chars, ldata);
- mutex_unlock(&tty->echo_lock);
+ mutex_unlock(&ldata->echo_lock);
}
/**
@@ -790,18 +828,16 @@
* Locking: echo_lock to protect the echo buffer
*/
-static void echo_char_raw(unsigned char c, struct tty_struct *tty)
+static void echo_char_raw(unsigned char c, struct n_tty_data *ldata)
{
- mutex_lock(&tty->echo_lock);
-
+ mutex_lock(&ldata->echo_lock);
if (c == ECHO_OP_START) {
- add_echo_byte(ECHO_OP_START, tty);
- add_echo_byte(ECHO_OP_START, tty);
+ add_echo_byte(ECHO_OP_START, ldata);
+ add_echo_byte(ECHO_OP_START, ldata);
} else {
- add_echo_byte(c, tty);
+ add_echo_byte(c, ldata);
}
-
- mutex_unlock(&tty->echo_lock);
+ mutex_unlock(&ldata->echo_lock);
}
/**
@@ -820,30 +856,32 @@
static void echo_char(unsigned char c, struct tty_struct *tty)
{
- mutex_lock(&tty->echo_lock);
+ struct n_tty_data *ldata = tty->disc_data;
+
+ mutex_lock(&ldata->echo_lock);
if (c == ECHO_OP_START) {
- add_echo_byte(ECHO_OP_START, tty);
- add_echo_byte(ECHO_OP_START, tty);
+ add_echo_byte(ECHO_OP_START, ldata);
+ add_echo_byte(ECHO_OP_START, ldata);
} else {
if (L_ECHOCTL(tty) && iscntrl(c) && c != '\t')
- add_echo_byte(ECHO_OP_START, tty);
- add_echo_byte(c, tty);
+ add_echo_byte(ECHO_OP_START, ldata);
+ add_echo_byte(c, ldata);
}
- mutex_unlock(&tty->echo_lock);
+ mutex_unlock(&ldata->echo_lock);
}
/**
* finish_erasing - complete erase
- * @tty: tty doing the erase
+ * @ldata: n_tty data
*/
-static inline void finish_erasing(struct tty_struct *tty)
+static inline void finish_erasing(struct n_tty_data *ldata)
{
- if (tty->erasing) {
- echo_char_raw('/', tty);
- tty->erasing = 0;
+ if (ldata->erasing) {
+ echo_char_raw('/', ldata);
+ ldata->erasing = 0;
}
}
@@ -861,12 +899,13 @@
static void eraser(unsigned char c, struct tty_struct *tty)
{
+ struct n_tty_data *ldata = tty->disc_data;
enum { ERASE, WERASE, KILL } kill_type;
int head, seen_alnums, cnt;
unsigned long flags;
/* FIXME: locking needed ? */
- if (tty->read_head == tty->canon_head) {
+ if (ldata->read_head == ldata->canon_head) {
/* process_output('\a', tty); */ /* what do you think? */
return;
}
@@ -876,24 +915,24 @@
kill_type = WERASE;
else {
if (!L_ECHO(tty)) {
- spin_lock_irqsave(&tty->read_lock, flags);
- tty->read_cnt -= ((tty->read_head - tty->canon_head) &
+ spin_lock_irqsave(&ldata->read_lock, flags);
+ ldata->read_cnt -= ((ldata->read_head - ldata->canon_head) &
(N_TTY_BUF_SIZE - 1));
- tty->read_head = tty->canon_head;
- spin_unlock_irqrestore(&tty->read_lock, flags);
+ ldata->read_head = ldata->canon_head;
+ spin_unlock_irqrestore(&ldata->read_lock, flags);
return;
}
if (!L_ECHOK(tty) || !L_ECHOKE(tty) || !L_ECHOE(tty)) {
- spin_lock_irqsave(&tty->read_lock, flags);
- tty->read_cnt -= ((tty->read_head - tty->canon_head) &
+ spin_lock_irqsave(&ldata->read_lock, flags);
+ ldata->read_cnt -= ((ldata->read_head - ldata->canon_head) &
(N_TTY_BUF_SIZE - 1));
- tty->read_head = tty->canon_head;
- spin_unlock_irqrestore(&tty->read_lock, flags);
- finish_erasing(tty);
+ ldata->read_head = ldata->canon_head;
+ spin_unlock_irqrestore(&ldata->read_lock, flags);
+ finish_erasing(ldata);
echo_char(KILL_CHAR(tty), tty);
/* Add a newline if ECHOK is on and ECHOKE is off. */
if (L_ECHOK(tty))
- echo_char_raw('\n', tty);
+ echo_char_raw('\n', ldata);
return;
}
kill_type = KILL;
@@ -901,14 +940,14 @@
seen_alnums = 0;
/* FIXME: Locking ?? */
- while (tty->read_head != tty->canon_head) {
- head = tty->read_head;
+ while (ldata->read_head != ldata->canon_head) {
+ head = ldata->read_head;
/* erase a single possibly multibyte character */
do {
head = (head - 1) & (N_TTY_BUF_SIZE-1);
- c = tty->read_buf[head];
- } while (is_continuation(c, tty) && head != tty->canon_head);
+ c = ldata->read_buf[head];
+ } while (is_continuation(c, tty) && head != ldata->canon_head);
/* do not partially erase */
if (is_continuation(c, tty))
@@ -921,30 +960,31 @@
else if (seen_alnums)
break;
}
- cnt = (tty->read_head - head) & (N_TTY_BUF_SIZE-1);
- spin_lock_irqsave(&tty->read_lock, flags);
- tty->read_head = head;
- tty->read_cnt -= cnt;
- spin_unlock_irqrestore(&tty->read_lock, flags);
+ cnt = (ldata->read_head - head) & (N_TTY_BUF_SIZE-1);
+ spin_lock_irqsave(&ldata->read_lock, flags);
+ ldata->read_head = head;
+ ldata->read_cnt -= cnt;
+ spin_unlock_irqrestore(&ldata->read_lock, flags);
if (L_ECHO(tty)) {
if (L_ECHOPRT(tty)) {
- if (!tty->erasing) {
- echo_char_raw('\\', tty);
- tty->erasing = 1;
+ if (!ldata->erasing) {
+ echo_char_raw('\\', ldata);
+ ldata->erasing = 1;
}
/* if cnt > 1, output a multi-byte character */
echo_char(c, tty);
while (--cnt > 0) {
head = (head+1) & (N_TTY_BUF_SIZE-1);
- echo_char_raw(tty->read_buf[head], tty);
- echo_move_back_col(tty);
+ echo_char_raw(ldata->read_buf[head],
+ ldata);
+ echo_move_back_col(ldata);
}
} else if (kill_type == ERASE && !L_ECHOE(tty)) {
echo_char(ERASE_CHAR(tty), tty);
} else if (c == '\t') {
unsigned int num_chars = 0;
int after_tab = 0;
- unsigned long tail = tty->read_head;
+ unsigned long tail = ldata->read_head;
/*
* Count the columns used for characters
@@ -953,9 +993,9 @@
* This info is used to go back the correct
* number of columns.
*/
- while (tail != tty->canon_head) {
+ while (tail != ldata->canon_head) {
tail = (tail-1) & (N_TTY_BUF_SIZE-1);
- c = tty->read_buf[tail];
+ c = ldata->read_buf[tail];
if (c == '\t') {
after_tab = 1;
break;
@@ -966,25 +1006,25 @@
num_chars++;
}
}
- echo_erase_tab(num_chars, after_tab, tty);
+ echo_erase_tab(num_chars, after_tab, ldata);
} else {
if (iscntrl(c) && L_ECHOCTL(tty)) {
- echo_char_raw('\b', tty);
- echo_char_raw(' ', tty);
- echo_char_raw('\b', tty);
+ echo_char_raw('\b', ldata);
+ echo_char_raw(' ', ldata);
+ echo_char_raw('\b', ldata);
}
if (!iscntrl(c) || L_ECHOCTL(tty)) {
- echo_char_raw('\b', tty);
- echo_char_raw(' ', tty);
- echo_char_raw('\b', tty);
+ echo_char_raw('\b', ldata);
+ echo_char_raw(' ', ldata);
+ echo_char_raw('\b', ldata);
}
}
}
if (kill_type == ERASE)
break;
}
- if (tty->read_head == tty->canon_head && L_ECHO(tty))
- finish_erasing(tty);
+ if (ldata->read_head == ldata->canon_head && L_ECHO(tty))
+ finish_erasing(ldata);
}
/**
@@ -1023,6 +1063,8 @@
static inline void n_tty_receive_break(struct tty_struct *tty)
{
+ struct n_tty_data *ldata = tty->disc_data;
+
if (I_IGNBRK(tty))
return;
if (I_BRKINT(tty)) {
@@ -1030,10 +1072,10 @@
return;
}
if (I_PARMRK(tty)) {
- put_tty_queue('\377', tty);
- put_tty_queue('\0', tty);
+ put_tty_queue('\377', ldata);
+ put_tty_queue('\0', ldata);
}
- put_tty_queue('\0', tty);
+ put_tty_queue('\0', ldata);
wake_up_interruptible(&tty->read_wait);
}
@@ -1052,16 +1094,17 @@
static inline void n_tty_receive_overrun(struct tty_struct *tty)
{
+ struct n_tty_data *ldata = tty->disc_data;
char buf[64];
- tty->num_overrun++;
- if (time_before(tty->overrun_time, jiffies - HZ) ||
- time_after(tty->overrun_time, jiffies)) {
+ ldata->num_overrun++;
+ if (time_after(jiffies, ldata->overrun_time + HZ) ||
+ time_after(ldata->overrun_time, jiffies)) {
printk(KERN_WARNING "%s: %d input overrun(s)\n",
tty_name(tty, buf),
- tty->num_overrun);
- tty->overrun_time = jiffies;
- tty->num_overrun = 0;
+ ldata->num_overrun);
+ ldata->overrun_time = jiffies;
+ ldata->num_overrun = 0;
}
}
@@ -1076,16 +1119,18 @@
static inline void n_tty_receive_parity_error(struct tty_struct *tty,
unsigned char c)
{
+ struct n_tty_data *ldata = tty->disc_data;
+
if (I_IGNPAR(tty))
return;
if (I_PARMRK(tty)) {
- put_tty_queue('\377', tty);
- put_tty_queue('\0', tty);
- put_tty_queue(c, tty);
+ put_tty_queue('\377', ldata);
+ put_tty_queue('\0', ldata);
+ put_tty_queue(c, ldata);
} else if (I_INPCK(tty))
- put_tty_queue('\0', tty);
+ put_tty_queue('\0', ldata);
else
- put_tty_queue(c, tty);
+ put_tty_queue(c, ldata);
wake_up_interruptible(&tty->read_wait);
}
@@ -1101,11 +1146,12 @@
static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c)
{
+ struct n_tty_data *ldata = tty->disc_data;
unsigned long flags;
int parmrk;
- if (tty->raw) {
- put_tty_queue(c, tty);
+ if (ldata->raw) {
+ put_tty_queue(c, ldata);
return;
}
@@ -1115,7 +1161,7 @@
c = tolower(c);
if (L_EXTPROC(tty)) {
- put_tty_queue(c, tty);
+ put_tty_queue(c, ldata);
return;
}
@@ -1143,26 +1189,26 @@
* handle specially, do shortcut processing to speed things
* up.
*/
- if (!test_bit(c, tty->process_char_map) || tty->lnext) {
- tty->lnext = 0;
+ if (!test_bit(c, ldata->process_char_map) || ldata->lnext) {
+ ldata->lnext = 0;
parmrk = (c == (unsigned char) '\377' && I_PARMRK(tty)) ? 1 : 0;
- if (tty->read_cnt >= (N_TTY_BUF_SIZE - parmrk - 1)) {
+ if (ldata->read_cnt >= (N_TTY_BUF_SIZE - parmrk - 1)) {
/* beep if no space */
if (L_ECHO(tty))
process_output('\a', tty);
return;
}
if (L_ECHO(tty)) {
- finish_erasing(tty);
+ finish_erasing(ldata);
/* Record the column of first canon char. */
- if (tty->canon_head == tty->read_head)
- echo_set_canon_col(tty);
+ if (ldata->canon_head == ldata->read_head)
+ echo_set_canon_col(ldata);
echo_char(c, tty);
process_echoes(tty);
}
if (parmrk)
- put_tty_queue(c, tty);
- put_tty_queue(c, tty);
+ put_tty_queue(c, ldata);
+ put_tty_queue(c, ldata);
return;
}
@@ -1218,7 +1264,7 @@
} else if (c == '\n' && I_INLCR(tty))
c = '\r';
- if (tty->icanon) {
+ if (ldata->icanon) {
if (c == ERASE_CHAR(tty) || c == KILL_CHAR(tty) ||
(c == WERASE_CHAR(tty) && L_IEXTEN(tty))) {
eraser(c, tty);
@@ -1226,12 +1272,12 @@
return;
}
if (c == LNEXT_CHAR(tty) && L_IEXTEN(tty)) {
- tty->lnext = 1;
+ ldata->lnext = 1;
if (L_ECHO(tty)) {
- finish_erasing(tty);
+ finish_erasing(ldata);
if (L_ECHOCTL(tty)) {
- echo_char_raw('^', tty);
- echo_char_raw('\b', tty);
+ echo_char_raw('^', ldata);
+ echo_char_raw('\b', ldata);
process_echoes(tty);
}
}
@@ -1239,34 +1285,34 @@
}
if (c == REPRINT_CHAR(tty) && L_ECHO(tty) &&
L_IEXTEN(tty)) {
- unsigned long tail = tty->canon_head;
+ unsigned long tail = ldata->canon_head;
- finish_erasing(tty);
+ finish_erasing(ldata);
echo_char(c, tty);
- echo_char_raw('\n', tty);
- while (tail != tty->read_head) {
- echo_char(tty->read_buf[tail], tty);
+ echo_char_raw('\n', ldata);
+ while (tail != ldata->read_head) {
+ echo_char(ldata->read_buf[tail], tty);
tail = (tail+1) & (N_TTY_BUF_SIZE-1);
}
process_echoes(tty);
return;
}
if (c == '\n') {
- if (tty->read_cnt >= N_TTY_BUF_SIZE) {
+ if (ldata->read_cnt >= N_TTY_BUF_SIZE) {
if (L_ECHO(tty))
process_output('\a', tty);
return;
}
if (L_ECHO(tty) || L_ECHONL(tty)) {
- echo_char_raw('\n', tty);
+ echo_char_raw('\n', ldata);
process_echoes(tty);
}
goto handle_newline;
}
if (c == EOF_CHAR(tty)) {
- if (tty->read_cnt >= N_TTY_BUF_SIZE)
+ if (ldata->read_cnt >= N_TTY_BUF_SIZE)
return;
- if (tty->canon_head != tty->read_head)
+ if (ldata->canon_head != ldata->read_head)
set_bit(TTY_PUSH, &tty->flags);
c = __DISABLED_CHAR;
goto handle_newline;
@@ -1275,7 +1321,7 @@
(c == EOL2_CHAR(tty) && L_IEXTEN(tty))) {
parmrk = (c == (unsigned char) '\377' && I_PARMRK(tty))
? 1 : 0;
- if (tty->read_cnt >= (N_TTY_BUF_SIZE - parmrk)) {
+ if (ldata->read_cnt >= (N_TTY_BUF_SIZE - parmrk)) {
if (L_ECHO(tty))
process_output('\a', tty);
return;
@@ -1285,8 +1331,8 @@
*/
if (L_ECHO(tty)) {
/* Record the column of first canon char. */
- if (tty->canon_head == tty->read_head)
- echo_set_canon_col(tty);
+ if (ldata->canon_head == ldata->read_head)
+ echo_set_canon_col(ldata);
echo_char(c, tty);
process_echoes(tty);
}
@@ -1295,15 +1341,15 @@
* EOL_CHAR and EOL2_CHAR?
*/
if (parmrk)
- put_tty_queue(c, tty);
+ put_tty_queue(c, ldata);
handle_newline:
- spin_lock_irqsave(&tty->read_lock, flags);
- set_bit(tty->read_head, tty->read_flags);
- put_tty_queue_nolock(c, tty);
- tty->canon_head = tty->read_head;
- tty->canon_data++;
- spin_unlock_irqrestore(&tty->read_lock, flags);
+ spin_lock_irqsave(&ldata->read_lock, flags);
+ set_bit(ldata->read_head, ldata->read_flags);
+ put_tty_queue_nolock(c, ldata);
+ ldata->canon_head = ldata->read_head;
+ ldata->canon_data++;
+ spin_unlock_irqrestore(&ldata->read_lock, flags);
kill_fasync(&tty->fasync, SIGIO, POLL_IN);
if (waitqueue_active(&tty->read_wait))
wake_up_interruptible(&tty->read_wait);
@@ -1312,29 +1358,29 @@
}
parmrk = (c == (unsigned char) '\377' && I_PARMRK(tty)) ? 1 : 0;
- if (tty->read_cnt >= (N_TTY_BUF_SIZE - parmrk - 1)) {
+ if (ldata->read_cnt >= (N_TTY_BUF_SIZE - parmrk - 1)) {
/* beep if no space */
if (L_ECHO(tty))
process_output('\a', tty);
return;
}
if (L_ECHO(tty)) {
- finish_erasing(tty);
+ finish_erasing(ldata);
if (c == '\n')
- echo_char_raw('\n', tty);
+ echo_char_raw('\n', ldata);
else {
/* Record the column of first canon char. */
- if (tty->canon_head == tty->read_head)
- echo_set_canon_col(tty);
+ if (ldata->canon_head == ldata->read_head)
+ echo_set_canon_col(ldata);
echo_char(c, tty);
}
process_echoes(tty);
}
if (parmrk)
- put_tty_queue(c, tty);
+ put_tty_queue(c, ldata);
- put_tty_queue(c, tty);
+ put_tty_queue(c, ldata);
}
@@ -1369,33 +1415,31 @@
static void n_tty_receive_buf(struct tty_struct *tty, const unsigned char *cp,
char *fp, int count)
{
+ struct n_tty_data *ldata = tty->disc_data;
const unsigned char *p;
char *f, flags = TTY_NORMAL;
int i;
char buf[64];
unsigned long cpuflags;
- if (!tty->read_buf)
- return;
-
- if (tty->real_raw) {
- spin_lock_irqsave(&tty->read_lock, cpuflags);
- i = min(N_TTY_BUF_SIZE - tty->read_cnt,
- N_TTY_BUF_SIZE - tty->read_head);
+ if (ldata->real_raw) {
+ spin_lock_irqsave(&ldata->read_lock, cpuflags);
+ i = min(N_TTY_BUF_SIZE - ldata->read_cnt,
+ N_TTY_BUF_SIZE - ldata->read_head);
i = min(count, i);
- memcpy(tty->read_buf + tty->read_head, cp, i);
- tty->read_head = (tty->read_head + i) & (N_TTY_BUF_SIZE-1);
- tty->read_cnt += i;
+ memcpy(ldata->read_buf + ldata->read_head, cp, i);
+ ldata->read_head = (ldata->read_head + i) & (N_TTY_BUF_SIZE-1);
+ ldata->read_cnt += i;
cp += i;
count -= i;
- i = min(N_TTY_BUF_SIZE - tty->read_cnt,
- N_TTY_BUF_SIZE - tty->read_head);
+ i = min(N_TTY_BUF_SIZE - ldata->read_cnt,
+ N_TTY_BUF_SIZE - ldata->read_head);
i = min(count, i);
- memcpy(tty->read_buf + tty->read_head, cp, i);
- tty->read_head = (tty->read_head + i) & (N_TTY_BUF_SIZE-1);
- tty->read_cnt += i;
- spin_unlock_irqrestore(&tty->read_lock, cpuflags);
+ memcpy(ldata->read_buf + ldata->read_head, cp, i);
+ ldata->read_head = (ldata->read_head + i) & (N_TTY_BUF_SIZE-1);
+ ldata->read_cnt += i;
+ spin_unlock_irqrestore(&ldata->read_lock, cpuflags);
} else {
for (i = count, p = cp, f = fp; i; i--, p++) {
if (f)
@@ -1426,7 +1470,7 @@
n_tty_set_room(tty);
- if ((!tty->icanon && (tty->read_cnt >= tty->minimum_to_wake)) ||
+ if ((!ldata->icanon && (ldata->read_cnt >= tty->minimum_to_wake)) ||
L_EXTPROC(tty)) {
kill_fasync(&tty->fasync, SIGIO, POLL_IN);
if (waitqueue_active(&tty->read_wait))
@@ -1470,25 +1514,25 @@
static void n_tty_set_termios(struct tty_struct *tty, struct ktermios *old)
{
+ struct n_tty_data *ldata = tty->disc_data;
int canon_change = 1;
- BUG_ON(!tty);
if (old)
canon_change = (old->c_lflag ^ tty->termios.c_lflag) & ICANON;
if (canon_change) {
- memset(&tty->read_flags, 0, sizeof tty->read_flags);
- tty->canon_head = tty->read_tail;
- tty->canon_data = 0;
- tty->erasing = 0;
+ bitmap_zero(ldata->read_flags, N_TTY_BUF_SIZE);
+ ldata->canon_head = ldata->read_tail;
+ ldata->canon_data = 0;
+ ldata->erasing = 0;
}
- if (canon_change && !L_ICANON(tty) && tty->read_cnt)
+ if (canon_change && !L_ICANON(tty) && ldata->read_cnt)
wake_up_interruptible(&tty->read_wait);
- tty->icanon = (L_ICANON(tty) != 0);
+ ldata->icanon = (L_ICANON(tty) != 0);
if (test_bit(TTY_HW_COOK_IN, &tty->flags)) {
- tty->raw = 1;
- tty->real_raw = 1;
+ ldata->raw = 1;
+ ldata->real_raw = 1;
n_tty_set_room(tty);
return;
}
@@ -1496,51 +1540,51 @@
I_ICRNL(tty) || I_INLCR(tty) || L_ICANON(tty) ||
I_IXON(tty) || L_ISIG(tty) || L_ECHO(tty) ||
I_PARMRK(tty)) {
- memset(tty->process_char_map, 0, 256/8);
+ bitmap_zero(ldata->process_char_map, 256);
if (I_IGNCR(tty) || I_ICRNL(tty))
- set_bit('\r', tty->process_char_map);
+ set_bit('\r', ldata->process_char_map);
if (I_INLCR(tty))
- set_bit('\n', tty->process_char_map);
+ set_bit('\n', ldata->process_char_map);
if (L_ICANON(tty)) {
- set_bit(ERASE_CHAR(tty), tty->process_char_map);
- set_bit(KILL_CHAR(tty), tty->process_char_map);
- set_bit(EOF_CHAR(tty), tty->process_char_map);
- set_bit('\n', tty->process_char_map);
- set_bit(EOL_CHAR(tty), tty->process_char_map);
+ set_bit(ERASE_CHAR(tty), ldata->process_char_map);
+ set_bit(KILL_CHAR(tty), ldata->process_char_map);
+ set_bit(EOF_CHAR(tty), ldata->process_char_map);
+ set_bit('\n', ldata->process_char_map);
+ set_bit(EOL_CHAR(tty), ldata->process_char_map);
if (L_IEXTEN(tty)) {
set_bit(WERASE_CHAR(tty),
- tty->process_char_map);
+ ldata->process_char_map);
set_bit(LNEXT_CHAR(tty),
- tty->process_char_map);
+ ldata->process_char_map);
set_bit(EOL2_CHAR(tty),
- tty->process_char_map);
+ ldata->process_char_map);
if (L_ECHO(tty))
set_bit(REPRINT_CHAR(tty),
- tty->process_char_map);
+ ldata->process_char_map);
}
}
if (I_IXON(tty)) {
- set_bit(START_CHAR(tty), tty->process_char_map);
- set_bit(STOP_CHAR(tty), tty->process_char_map);
+ set_bit(START_CHAR(tty), ldata->process_char_map);
+ set_bit(STOP_CHAR(tty), ldata->process_char_map);
}
if (L_ISIG(tty)) {
- set_bit(INTR_CHAR(tty), tty->process_char_map);
- set_bit(QUIT_CHAR(tty), tty->process_char_map);
- set_bit(SUSP_CHAR(tty), tty->process_char_map);
+ set_bit(INTR_CHAR(tty), ldata->process_char_map);
+ set_bit(QUIT_CHAR(tty), ldata->process_char_map);
+ set_bit(SUSP_CHAR(tty), ldata->process_char_map);
}
- clear_bit(__DISABLED_CHAR, tty->process_char_map);
- tty->raw = 0;
- tty->real_raw = 0;
+ clear_bit(__DISABLED_CHAR, ldata->process_char_map);
+ ldata->raw = 0;
+ ldata->real_raw = 0;
} else {
- tty->raw = 1;
+ ldata->raw = 1;
if ((I_IGNBRK(tty) || (!I_BRKINT(tty) && !I_PARMRK(tty))) &&
(I_IGNPAR(tty) || !I_INPCK(tty)) &&
(tty->driver->flags & TTY_DRIVER_REAL_RAW))
- tty->real_raw = 1;
+ ldata->real_raw = 1;
else
- tty->real_raw = 0;
+ ldata->real_raw = 0;
}
n_tty_set_room(tty);
/* The termios change make the tty ready for I/O */
@@ -1560,15 +1604,13 @@
static void n_tty_close(struct tty_struct *tty)
{
+ struct n_tty_data *ldata = tty->disc_data;
+
n_tty_flush_buffer(tty);
- if (tty->read_buf) {
- kfree(tty->read_buf);
- tty->read_buf = NULL;
- }
- if (tty->echo_buf) {
- kfree(tty->echo_buf);
- tty->echo_buf = NULL;
- }
+ kfree(ldata->read_buf);
+ kfree(ldata->echo_buf);
+ kfree(ldata);
+ tty->disc_data = NULL;
}
/**
@@ -1583,37 +1625,50 @@
static int n_tty_open(struct tty_struct *tty)
{
- if (!tty)
- return -EINVAL;
+ struct n_tty_data *ldata;
+
+ ldata = kzalloc(sizeof(*ldata), GFP_KERNEL);
+ if (!ldata)
+ goto err;
+
+ ldata->overrun_time = jiffies;
+ mutex_init(&ldata->atomic_read_lock);
+ mutex_init(&ldata->output_lock);
+ mutex_init(&ldata->echo_lock);
+ spin_lock_init(&ldata->read_lock);
/* These are ugly. Currently a malloc failure here can panic */
- if (!tty->read_buf) {
- tty->read_buf = kzalloc(N_TTY_BUF_SIZE, GFP_KERNEL);
- if (!tty->read_buf)
- return -ENOMEM;
- }
- if (!tty->echo_buf) {
- tty->echo_buf = kzalloc(N_TTY_BUF_SIZE, GFP_KERNEL);
+ ldata->read_buf = kzalloc(N_TTY_BUF_SIZE, GFP_KERNEL);
+ ldata->echo_buf = kzalloc(N_TTY_BUF_SIZE, GFP_KERNEL);
+ if (!ldata->read_buf || !ldata->echo_buf)
+ goto err_free_bufs;
- if (!tty->echo_buf)
- return -ENOMEM;
- }
+ tty->disc_data = ldata;
reset_buffer_flags(tty);
tty_unthrottle(tty);
- tty->column = 0;
+ ldata->column = 0;
n_tty_set_termios(tty, NULL);
tty->minimum_to_wake = 1;
tty->closing = 0;
+
return 0;
+err_free_bufs:
+ kfree(ldata->read_buf);
+ kfree(ldata->echo_buf);
+ kfree(ldata);
+err:
+ return -ENOMEM;
}
static inline int input_available_p(struct tty_struct *tty, int amt)
{
+ struct n_tty_data *ldata = tty->disc_data;
+
tty_flush_to_ldisc(tty);
- if (tty->icanon && !L_EXTPROC(tty)) {
- if (tty->canon_data)
+ if (ldata->icanon && !L_EXTPROC(tty)) {
+ if (ldata->canon_data)
return 1;
- } else if (tty->read_cnt >= (amt ? amt : 1))
+ } else if (ldata->read_cnt >= (amt ? amt : 1))
return 1;
return 0;
@@ -1632,7 +1687,7 @@
* buffer, and once to drain the space from the (physical) beginning of
* the buffer to head pointer.
*
- * Called under the tty->atomic_read_lock sem
+ * Called under the ldata->atomic_read_lock sem
*
*/
@@ -1641,29 +1696,31 @@
size_t *nr)
{
+ struct n_tty_data *ldata = tty->disc_data;
int retval;
size_t n;
unsigned long flags;
bool is_eof;
retval = 0;
- spin_lock_irqsave(&tty->read_lock, flags);
- n = min(tty->read_cnt, N_TTY_BUF_SIZE - tty->read_tail);
+ spin_lock_irqsave(&ldata->read_lock, flags);
+ n = min(ldata->read_cnt, N_TTY_BUF_SIZE - ldata->read_tail);
n = min(*nr, n);
- spin_unlock_irqrestore(&tty->read_lock, flags);
+ spin_unlock_irqrestore(&ldata->read_lock, flags);
if (n) {
- retval = copy_to_user(*b, &tty->read_buf[tty->read_tail], n);
+ retval = copy_to_user(*b, &ldata->read_buf[ldata->read_tail], n);
n -= retval;
is_eof = n == 1 &&
- tty->read_buf[tty->read_tail] == EOF_CHAR(tty);
- tty_audit_add_data(tty, &tty->read_buf[tty->read_tail], n);
- spin_lock_irqsave(&tty->read_lock, flags);
- tty->read_tail = (tty->read_tail + n) & (N_TTY_BUF_SIZE-1);
- tty->read_cnt -= n;
+ ldata->read_buf[ldata->read_tail] == EOF_CHAR(tty);
+ tty_audit_add_data(tty, &ldata->read_buf[ldata->read_tail], n,
+ ldata->icanon);
+ spin_lock_irqsave(&ldata->read_lock, flags);
+ ldata->read_tail = (ldata->read_tail + n) & (N_TTY_BUF_SIZE-1);
+ ldata->read_cnt -= n;
/* Turn single EOF into zero-length read */
- if (L_EXTPROC(tty) && tty->icanon && is_eof && !tty->read_cnt)
+ if (L_EXTPROC(tty) && ldata->icanon && is_eof && !ldata->read_cnt)
n = 0;
- spin_unlock_irqrestore(&tty->read_lock, flags);
+ spin_unlock_irqrestore(&ldata->read_lock, flags);
*b += n;
*nr -= n;
}
@@ -1730,6 +1787,7 @@
static ssize_t n_tty_read(struct tty_struct *tty, struct file *file,
unsigned char __user *buf, size_t nr)
{
+ struct n_tty_data *ldata = tty->disc_data;
unsigned char __user *b = buf;
DECLARE_WAITQUEUE(wait, current);
int c;
@@ -1741,17 +1799,13 @@
int packet;
do_it_again:
-
- if (WARN_ON(!tty->read_buf))
- return -EAGAIN;
-
c = job_control(tty, file);
if (c < 0)
return c;
minimum = time = 0;
timeout = MAX_SCHEDULE_TIMEOUT;
- if (!tty->icanon) {
+ if (!ldata->icanon) {
time = (HZ / 10) * TIME_CHAR(tty);
minimum = MIN_CHAR(tty);
if (minimum) {
@@ -1774,10 +1828,10 @@
* Internal serialization of reads.
*/
if (file->f_flags & O_NONBLOCK) {
- if (!mutex_trylock(&tty->atomic_read_lock))
+ if (!mutex_trylock(&ldata->atomic_read_lock))
return -EAGAIN;
} else {
- if (mutex_lock_interruptible(&tty->atomic_read_lock))
+ if (mutex_lock_interruptible(&ldata->atomic_read_lock))
return -ERESTARTSYS;
}
packet = tty->packet;
@@ -1830,7 +1884,6 @@
/* FIXME: does n_tty_set_room need locking ? */
n_tty_set_room(tty);
timeout = schedule_timeout(timeout);
- BUG_ON(!tty->read_buf);
continue;
}
__set_current_state(TASK_RUNNING);
@@ -1845,45 +1898,45 @@
nr--;
}
- if (tty->icanon && !L_EXTPROC(tty)) {
+ if (ldata->icanon && !L_EXTPROC(tty)) {
/* N.B. avoid overrun if nr == 0 */
- spin_lock_irqsave(&tty->read_lock, flags);
- while (nr && tty->read_cnt) {
+ spin_lock_irqsave(&ldata->read_lock, flags);
+ while (nr && ldata->read_cnt) {
int eol;
- eol = test_and_clear_bit(tty->read_tail,
- tty->read_flags);
- c = tty->read_buf[tty->read_tail];
- tty->read_tail = ((tty->read_tail+1) &
+ eol = test_and_clear_bit(ldata->read_tail,
+ ldata->read_flags);
+ c = ldata->read_buf[ldata->read_tail];
+ ldata->read_tail = ((ldata->read_tail+1) &
(N_TTY_BUF_SIZE-1));
- tty->read_cnt--;
+ ldata->read_cnt--;
if (eol) {
/* this test should be redundant:
* we shouldn't be reading data if
* canon_data is 0
*/
- if (--tty->canon_data < 0)
- tty->canon_data = 0;
+ if (--ldata->canon_data < 0)
+ ldata->canon_data = 0;
}
- spin_unlock_irqrestore(&tty->read_lock, flags);
+ spin_unlock_irqrestore(&ldata->read_lock, flags);
if (!eol || (c != __DISABLED_CHAR)) {
if (tty_put_user(tty, c, b++)) {
retval = -EFAULT;
b--;
- spin_lock_irqsave(&tty->read_lock, flags);
+ spin_lock_irqsave(&ldata->read_lock, flags);
break;
}
nr--;
}
if (eol) {
tty_audit_push(tty);
- spin_lock_irqsave(&tty->read_lock, flags);
+ spin_lock_irqsave(&ldata->read_lock, flags);
break;
}
- spin_lock_irqsave(&tty->read_lock, flags);
+ spin_lock_irqsave(&ldata->read_lock, flags);
}
- spin_unlock_irqrestore(&tty->read_lock, flags);
+ spin_unlock_irqrestore(&ldata->read_lock, flags);
if (retval)
break;
} else {
@@ -1915,7 +1968,7 @@
if (time)
timeout = time;
}
- mutex_unlock(&tty->atomic_read_lock);
+ mutex_unlock(&ldata->atomic_read_lock);
remove_wait_queue(&tty->read_wait, &wait);
if (!waitqueue_active(&tty->read_wait))
@@ -2076,19 +2129,19 @@
return mask;
}
-static unsigned long inq_canon(struct tty_struct *tty)
+static unsigned long inq_canon(struct n_tty_data *ldata)
{
int nr, head, tail;
- if (!tty->canon_data)
+ if (!ldata->canon_data)
return 0;
- head = tty->canon_head;
- tail = tty->read_tail;
+ head = ldata->canon_head;
+ tail = ldata->read_tail;
nr = (head - tail) & (N_TTY_BUF_SIZE-1);
/* Skip EOF-chars.. */
while (head != tail) {
- if (test_bit(tail, tty->read_flags) &&
- tty->read_buf[tail] == __DISABLED_CHAR)
+ if (test_bit(tail, ldata->read_flags) &&
+ ldata->read_buf[tail] == __DISABLED_CHAR)
nr--;
tail = (tail+1) & (N_TTY_BUF_SIZE-1);
}
@@ -2098,6 +2151,7 @@
static int n_tty_ioctl(struct tty_struct *tty, struct file *file,
unsigned int cmd, unsigned long arg)
{
+ struct n_tty_data *ldata = tty->disc_data;
int retval;
switch (cmd) {
@@ -2105,9 +2159,9 @@
return put_user(tty_chars_in_buffer(tty), (int __user *) arg);
case TIOCINQ:
/* FIXME: Locking */
- retval = tty->read_cnt;
+ retval = ldata->read_cnt;
if (L_ICANON(tty))
- retval = inq_canon(tty);
+ retval = inq_canon(ldata);
return put_user(retval, (unsigned int __user *) arg);
default:
return n_tty_ioctl_helper(tty, file, cmd, arg);
diff --git a/drivers/tty/nozomi.c b/drivers/tty/nozomi.c
index b917c94..a0c69ab 100644
--- a/drivers/tty/nozomi.c
+++ b/drivers/tty/nozomi.c
@@ -400,7 +400,7 @@
} __attribute__ ((packed));
/* Global variables */
-static const struct pci_device_id nozomi_pci_tbl[] __devinitconst = {
+static const struct pci_device_id nozomi_pci_tbl[] = {
{PCI_DEVICE(0x1931, 0x000c)}, /* Nozomi HSDPA */
{},
};
@@ -1360,7 +1360,7 @@
}
/* Allocate memory for one device */
-static int __devinit nozomi_card_init(struct pci_dev *pdev,
+static int nozomi_card_init(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
resource_size_t start;
@@ -1479,6 +1479,7 @@
if (IS_ERR(tty_dev)) {
ret = PTR_ERR(tty_dev);
dev_err(&pdev->dev, "Could not allocate tty?\n");
+ tty_port_destroy(&port->port);
goto err_free_tty;
}
}
@@ -1486,8 +1487,10 @@
return 0;
err_free_tty:
- for (i = dc->index_start; i < dc->index_start + MAX_PORT; ++i)
- tty_unregister_device(ntty_driver, i);
+ for (i = 0; i < MAX_PORT; ++i) {
+ tty_unregister_device(ntty_driver, dc->index_start + i);
+ tty_port_destroy(&dc->port[i].port);
+ }
err_free_kfifo:
for (i = 0; i < MAX_PORT; i++)
kfifo_free(&dc->port[i].fifo_ul);
@@ -1504,7 +1507,7 @@
return ret;
}
-static void __devexit tty_exit(struct nozomi *dc)
+static void tty_exit(struct nozomi *dc)
{
unsigned int i;
@@ -1520,12 +1523,14 @@
complete off a hangup method ? */
while (dc->open_ttys)
msleep(1);
- for (i = dc->index_start; i < dc->index_start + MAX_PORT; ++i)
- tty_unregister_device(ntty_driver, i);
+ for (i = 0; i < MAX_PORT; ++i) {
+ tty_unregister_device(ntty_driver, dc->index_start + i);
+ tty_port_destroy(&dc->port[i].port);
+ }
}
/* Deallocate memory for one device */
-static void __devexit nozomi_card_exit(struct pci_dev *pdev)
+static void nozomi_card_exit(struct pci_dev *pdev)
{
int i;
struct ctrl_ul ctrl;
@@ -1903,7 +1908,7 @@
.name = NOZOMI_NAME,
.id_table = nozomi_pci_tbl,
.probe = nozomi_card_init,
- .remove = __devexit_p(nozomi_card_exit),
+ .remove = nozomi_card_exit,
};
static __init int nozomi_init(void)
diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c
index a82b399..be6a373 100644
--- a/drivers/tty/pty.c
+++ b/drivers/tty/pty.c
@@ -4,9 +4,6 @@
* Added support for a Unix98-style ptmx device.
* -- C. Scott Ananian <cananian@alumni.princeton.edu>, 14-Jan-1998
*
- * When reading this code see also fs/devpts. In particular note that the
- * driver_data field is used by the devpts side as a binding to the devpts
- * inode.
*/
#include <linux/module.h>
@@ -59,7 +56,7 @@
#ifdef CONFIG_UNIX98_PTYS
if (tty->driver == ptm_driver) {
mutex_lock(&devpts_mutex);
- devpts_pty_kill(tty->link);
+ devpts_pty_kill(tty->link->driver_data);
mutex_unlock(&devpts_mutex);
}
#endif
@@ -96,7 +93,7 @@
static int pty_space(struct tty_struct *to)
{
- int n = 8192 - to->buf.memory_used;
+ int n = 8192 - to->port->buf.memory_used;
if (n < 0)
return 0;
return n;
@@ -174,6 +171,41 @@
return 0;
}
+static int pty_get_lock(struct tty_struct *tty, int __user *arg)
+{
+ int locked = test_bit(TTY_PTY_LOCK, &tty->flags);
+ return put_user(locked, arg);
+}
+
+/* Set the packet mode on a pty */
+static int pty_set_pktmode(struct tty_struct *tty, int __user *arg)
+{
+ unsigned long flags;
+ int pktmode;
+
+ if (get_user(pktmode, arg))
+ return -EFAULT;
+
+ spin_lock_irqsave(&tty->ctrl_lock, flags);
+ if (pktmode) {
+ if (!tty->packet) {
+ tty->packet = 1;
+ tty->link->ctrl_status = 0;
+ }
+ } else
+ tty->packet = 0;
+ spin_unlock_irqrestore(&tty->ctrl_lock, flags);
+
+ return 0;
+}
+
+/* Get the packet mode of a pty */
+static int pty_get_pktmode(struct tty_struct *tty, int __user *arg)
+{
+ int pktmode = tty->packet;
+ return put_user(pktmode, arg);
+}
+
/* Send a signal to the slave */
static int pty_signal(struct tty_struct *tty, int sig)
{
@@ -245,7 +277,7 @@
* peform a terminal resize correctly
*/
-int pty_resize(struct tty_struct *tty, struct winsize *ws)
+static int pty_resize(struct tty_struct *tty, struct winsize *ws)
{
struct pid *pgrp, *rpgrp;
unsigned long flags;
@@ -348,6 +380,7 @@
tty_port_init(ports[1]);
o_tty->port = ports[0];
tty->port = ports[1];
+ o_tty->port->itty = o_tty;
tty_driver_kref_get(driver);
tty->count++;
@@ -366,9 +399,16 @@
return retval;
}
+/* this is called once with whichever end is closed last */
+static void pty_unix98_shutdown(struct tty_struct *tty)
+{
+ devpts_kill_index(tty->driver_data, tty->index);
+}
+
static void pty_cleanup(struct tty_struct *tty)
{
- kfree(tty->port);
+ tty->port->itty = NULL;
+ tty_port_put(tty->port);
}
/* Traditional BSD devices */
@@ -393,6 +433,12 @@
switch (cmd) {
case TIOCSPTLCK: /* Set PT Lock (disallow slave open) */
return pty_set_lock(tty, (int __user *) arg);
+ case TIOCGPTLCK: /* Get PT Lock status */
+ return pty_get_lock(tty, (int __user *)arg);
+ case TIOCPKT: /* Set PT packet mode */
+ return pty_set_pktmode(tty, (int __user *)arg);
+ case TIOCGPKT: /* Get PT packet mode */
+ return pty_get_pktmode(tty, (int __user *)arg);
case TIOCSIG: /* Send signal to other side of pty */
return pty_signal(tty, (int) arg);
}
@@ -507,6 +553,12 @@
switch (cmd) {
case TIOCSPTLCK: /* Set PT Lock (disallow slave open) */
return pty_set_lock(tty, (int __user *)arg);
+ case TIOCGPTLCK: /* Get PT Lock status */
+ return pty_get_lock(tty, (int __user *)arg);
+ case TIOCPKT: /* Set PT packet mode */
+ return pty_set_pktmode(tty, (int __user *)arg);
+ case TIOCGPKT: /* Get PT packet mode */
+ return pty_get_pktmode(tty, (int __user *)arg);
case TIOCGPTN: /* Get PT Number */
return put_user(tty->index, (unsigned int __user *)arg);
case TIOCSIG: /* Send signal to other side of pty */
@@ -547,7 +599,7 @@
struct tty_struct *tty;
mutex_lock(&devpts_mutex);
- tty = devpts_get_tty(pts_inode, idx);
+ tty = devpts_get_priv(pts_inode);
mutex_unlock(&devpts_mutex);
/* Master must be open before slave */
if (!tty)
@@ -581,6 +633,7 @@
.set_termios = pty_set_termios,
.ioctl = pty_unix98_ioctl,
.resize = pty_resize,
+ .shutdown = pty_unix98_shutdown,
.cleanup = pty_cleanup
};
@@ -596,6 +649,7 @@
.chars_in_buffer = pty_chars_in_buffer,
.unthrottle = pty_unthrottle,
.set_termios = pty_set_termios,
+ .shutdown = pty_unix98_shutdown,
.cleanup = pty_cleanup,
};
@@ -614,6 +668,7 @@
static int ptmx_open(struct inode *inode, struct file *filp)
{
struct tty_struct *tty;
+ struct inode *slave_inode;
int retval;
int index;
@@ -650,15 +705,21 @@
tty_add_file(tty, filp);
- retval = devpts_pty_new(inode, tty->link);
- if (retval)
+ slave_inode = devpts_pty_new(inode,
+ MKDEV(UNIX98_PTY_SLAVE_MAJOR, index), index,
+ tty->link);
+ if (IS_ERR(slave_inode)) {
+ retval = PTR_ERR(slave_inode);
goto err_release;
+ }
retval = ptm_driver->ops->open(tty, filp);
if (retval)
goto err_release;
tty_unlock(tty);
+ tty->driver_data = inode;
+ tty->link->driver_data = slave_inode;
return 0;
err_release:
tty_unlock(tty);
diff --git a/drivers/tty/rocket.c b/drivers/tty/rocket.c
index 9700d34..e42009a 100644
--- a/drivers/tty/rocket.c
+++ b/drivers/tty/rocket.c
@@ -673,6 +673,7 @@
if (sInitChan(ctlp, &info->channel, aiop, chan) == 0) {
printk(KERN_ERR "RocketPort sInitChan(%d, %d, %d) failed!\n",
board, aiop, chan);
+ tty_port_destroy(&info->port);
kfree(info);
return;
}
@@ -1757,7 +1758,7 @@
#ifdef CONFIG_PCI
-static struct pci_device_id __devinitdata __used rocket_pci_ids[] = {
+static struct pci_device_id __used rocket_pci_ids[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_ANY_ID) },
{ }
};
@@ -2357,6 +2358,7 @@
for (i = 0; i < MAX_RP_PORTS; i++)
if (rp_table[i]) {
tty_unregister_device(rocket_driver, i);
+ tty_port_destroy(&rp_table[i]->port);
kfree(rp_table[i]);
}
diff --git a/drivers/tty/serial/68328serial.c b/drivers/tty/serial/68328serial.c
index 66c38a3..f99a845 100644
--- a/drivers/tty/serial/68328serial.c
+++ b/drivers/tty/serial/68328serial.c
@@ -1225,6 +1225,8 @@
if (tty_register_driver(serial_driver)) {
put_tty_driver(serial_driver);
+ for (i = 0; i < NR_PORTS; i++)
+ tty_port_destroy(&m68k_soft[i].tport);
printk(KERN_ERR "Couldn't register serial driver\n");
return -ENOMEM;
}
diff --git a/drivers/tty/serial/8250/8250.c b/drivers/tty/serial/8250/8250.c
index 3ba4234..d085e3a 100644
--- a/drivers/tty/serial/8250/8250.c
+++ b/drivers/tty/serial/8250/8250.c
@@ -280,7 +280,17 @@
.fifo_size = 64,
.tx_loadsz = 64,
.fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
- .flags = UART_CAP_FIFO | UART_CAP_AFE | UART_CAP_EFR,
+ .flags = UART_CAP_FIFO | UART_CAP_AFE | UART_CAP_EFR |
+ UART_CAP_SLEEP,
+ },
+ [PORT_XR17V35X] = {
+ .name = "XR17V35X",
+ .fifo_size = 256,
+ .tx_loadsz = 256,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_11 |
+ UART_FCR_T_TRIG_11,
+ .flags = UART_CAP_FIFO | UART_CAP_AFE | UART_CAP_EFR |
+ UART_CAP_SLEEP,
},
[PORT_LPC3220] = {
.name = "LPC3220",
@@ -455,6 +465,7 @@
}
static int serial8250_default_handle_irq(struct uart_port *port);
+static int exar_handle_irq(struct uart_port *port);
static void set_io_from_upio(struct uart_port *p)
{
@@ -574,6 +585,19 @@
*/
static void serial8250_set_sleep(struct uart_8250_port *p, int sleep)
{
+ /*
+ * Exar UARTs have a SLEEP register that enables or disables
+ * each UART to enter sleep mode separately. On the XR17V35x the
+ * register is accessible to each UART at the UART_EXAR_SLEEP
+ * offset but the UART channel may only write to the corresponding
+ * bit.
+ */
+ if ((p->port.type == PORT_XR17V35X) ||
+ (p->port.type == PORT_XR17D15X)) {
+ serial_out(p, UART_EXAR_SLEEP, 0xff);
+ return;
+ }
+
if (p->capabilities & UART_CAP_SLEEP) {
if (p->capabilities & UART_CAP_EFR) {
serial_out(p, UART_LCR, UART_LCR_CONF_MODE_B);
@@ -882,6 +906,27 @@
up->capabilities |= UART_CAP_FIFO;
/*
+ * XR17V35x UARTs have an extra divisor register, DLD
+ * that gets enabled with when DLAB is set which will
+ * cause the device to incorrectly match and assign
+ * port type to PORT_16650. The EFR for this UART is
+ * found at offset 0x09. Instead check the Deice ID (DVID)
+ * register for a 2, 4 or 8 port UART.
+ */
+ if (up->port.flags & UPF_EXAR_EFR) {
+ status1 = serial_in(up, UART_EXAR_DVID);
+ if (status1 == 0x82 || status1 == 0x84 || status1 == 0x88) {
+ DEBUG_AUTOCONF("Exar XR17V35x ");
+ up->port.type = PORT_XR17V35X;
+ up->capabilities |= UART_CAP_AFE | UART_CAP_EFR |
+ UART_CAP_SLEEP;
+
+ return;
+ }
+
+ }
+
+ /*
* Check for presence of the EFR when DLAB is set.
* Only ST16C650V1 UARTs pass this test.
*/
@@ -1013,8 +1058,12 @@
* Exar uarts have EFR in a weird location
*/
if (up->port.flags & UPF_EXAR_EFR) {
+ DEBUG_AUTOCONF("Exar XR17D15x ");
up->port.type = PORT_XR17D15X;
- up->capabilities |= UART_CAP_AFE | UART_CAP_EFR;
+ up->capabilities |= UART_CAP_AFE | UART_CAP_EFR |
+ UART_CAP_SLEEP;
+
+ return;
}
/*
@@ -1516,6 +1565,31 @@
}
/*
+ * These Exar UARTs have an extra interrupt indicator that could
+ * fire for a few unimplemented interrupts. One of which is a
+ * wakeup event when coming out of sleep. Put this here just
+ * to be on the safe side that these interrupts don't go unhandled.
+ */
+static int exar_handle_irq(struct uart_port *port)
+{
+ unsigned char int0, int1, int2, int3;
+ unsigned int iir = serial_port_in(port, UART_IIR);
+ int ret;
+
+ ret = serial8250_handle_irq(port, iir);
+
+ if ((port->type == PORT_XR17V35X) ||
+ (port->type == PORT_XR17D15X)) {
+ int0 = serial_port_in(port, 0x80);
+ int1 = serial_port_in(port, 0x81);
+ int2 = serial_port_in(port, 0x82);
+ int3 = serial_port_in(port, 0x83);
+ }
+
+ return ret;
+}
+
+/*
* This is the serial driver's interrupt routine.
*
* Arjan thinks the old way was overly complex, so it got simplified.
@@ -2349,16 +2423,14 @@
serial_port_out(port, UART_EFR, efr);
}
-#ifdef CONFIG_ARCH_OMAP1
/* Workaround to enable 115200 baud on OMAP1510 internal ports */
- if (cpu_is_omap1510() && is_omap_port(up)) {
+ if (is_omap1510_8250(up)) {
if (baud == 115200) {
quot = 1;
serial_port_out(port, UART_OMAP_OSC_12M_SEL, 1);
} else
serial_port_out(port, UART_OMAP_OSC_12M_SEL, 0);
}
-#endif
/*
* For NatSemi, switch to bank 2 not bank 1, to avoid resetting EXCR2,
@@ -2439,10 +2511,9 @@
{
if (pt->port.iotype == UPIO_AU)
return 0x1000;
-#ifdef CONFIG_ARCH_OMAP1
- if (is_omap_port(pt))
+ if (is_omap1_8250(pt))
return 0x16 << pt->port.regshift;
-#endif
+
return 8 << pt->port.regshift;
}
@@ -2617,6 +2688,11 @@
serial8250_release_rsa_resource(up);
if (port->type == PORT_UNKNOWN)
serial8250_release_std_resource(up);
+
+ /* Fixme: probably not the best place for this */
+ if ((port->type == PORT_XR17V35X) ||
+ (port->type == PORT_XR17D15X))
+ port->handle_irq = exar_handle_irq;
}
static int
@@ -2992,7 +3068,7 @@
* list is terminated with a zero flags entry, which means we expect
* all entries to have at least UPF_BOOT_AUTOCONF set.
*/
-static int __devinit serial8250_probe(struct platform_device *dev)
+static int serial8250_probe(struct platform_device *dev)
{
struct plat_serial8250_port *p = dev->dev.platform_data;
struct uart_8250_port uart;
@@ -3038,7 +3114,7 @@
/*
* Remove serial ports registered against a platform device.
*/
-static int __devexit serial8250_remove(struct platform_device *dev)
+static int serial8250_remove(struct platform_device *dev)
{
int i;
@@ -3081,7 +3157,7 @@
static struct platform_driver serial8250_isa_driver = {
.probe = serial8250_probe,
- .remove = __devexit_p(serial8250_remove),
+ .remove = serial8250_remove,
.suspend = serial8250_suspend,
.resume = serial8250_resume,
.driver = {
diff --git a/drivers/tty/serial/8250/8250.h b/drivers/tty/serial/8250/8250.h
index 5a76f9c..3b4ea84 100644
--- a/drivers/tty/serial/8250/8250.h
+++ b/drivers/tty/serial/8250/8250.h
@@ -106,3 +106,39 @@
static inline void serial8250_pnp_exit(void) { }
#endif
+#ifdef CONFIG_ARCH_OMAP1
+static inline int is_omap1_8250(struct uart_8250_port *pt)
+{
+ int res;
+
+ switch (pt->port.mapbase) {
+ case OMAP1_UART1_BASE:
+ case OMAP1_UART2_BASE:
+ case OMAP1_UART3_BASE:
+ res = 1;
+ break;
+ default:
+ res = 0;
+ break;
+ }
+
+ return res;
+}
+
+static inline int is_omap1510_8250(struct uart_8250_port *pt)
+{
+ if (!cpu_is_omap1510())
+ return 0;
+
+ return is_omap1_8250(pt);
+}
+#else
+static inline int is_omap1_8250(struct uart_8250_port *pt)
+{
+ return 0;
+}
+static inline int is_omap1510_8250(struct uart_8250_port *pt)
+{
+ return 0;
+}
+#endif
diff --git a/drivers/tty/serial/8250/8250_acorn.c b/drivers/tty/serial/8250/8250_acorn.c
index 8574983..549aa07 100644
--- a/drivers/tty/serial/8250/8250_acorn.c
+++ b/drivers/tty/serial/8250/8250_acorn.c
@@ -38,7 +38,7 @@
void __iomem *vaddr;
};
-static int __devinit
+static int
serial_card_probe(struct expansion_card *ec, const struct ecard_id *id)
{
struct serial_card_info *info;
@@ -80,7 +80,7 @@
return 0;
}
-static void __devexit serial_card_remove(struct expansion_card *ec)
+static void serial_card_remove(struct expansion_card *ec)
{
struct serial_card_info *info = ecard_get_drvdata(ec);
int i;
@@ -116,7 +116,7 @@
static struct ecard_driver serial_card_driver = {
.probe = serial_card_probe,
- .remove = __devexit_p(serial_card_remove),
+ .remove = serial_card_remove,
.id_table = serial_cids,
.drv = {
.name = "8250_acorn",
diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index c3b2ec0..1d0dba2 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -87,7 +87,7 @@
return 0;
}
-static int __devinit dw8250_probe(struct platform_device *pdev)
+static int dw8250_probe(struct platform_device *pdev)
{
struct uart_8250_port uart = {};
struct resource *regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -152,7 +152,7 @@
return 0;
}
-static int __devexit dw8250_remove(struct platform_device *pdev)
+static int dw8250_remove(struct platform_device *pdev)
{
struct dw8250_data *data = platform_get_drvdata(pdev);
@@ -161,6 +161,29 @@
return 0;
}
+#ifdef CONFIG_PM
+static int dw8250_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ struct dw8250_data *data = platform_get_drvdata(pdev);
+
+ serial8250_suspend_port(data->line);
+
+ return 0;
+}
+
+static int dw8250_resume(struct platform_device *pdev)
+{
+ struct dw8250_data *data = platform_get_drvdata(pdev);
+
+ serial8250_resume_port(data->line);
+
+ return 0;
+}
+#else
+#define dw8250_suspend NULL
+#define dw8250_resume NULL
+#endif /* CONFIG_PM */
+
static const struct of_device_id dw8250_match[] = {
{ .compatible = "snps,dw-apb-uart" },
{ /* Sentinel */ }
@@ -174,7 +197,9 @@
.of_match_table = dw8250_match,
},
.probe = dw8250_probe,
- .remove = __devexit_p(dw8250_remove),
+ .remove = dw8250_remove,
+ .suspend = dw8250_suspend,
+ .resume = dw8250_resume,
};
module_platform_driver(dw8250_platform_driver);
diff --git a/drivers/tty/serial/8250/8250_early.c b/drivers/tty/serial/8250/8250_early.c
index eaafb98..f53a7db 100644
--- a/drivers/tty/serial/8250/8250_early.c
+++ b/drivers/tty/serial/8250/8250_early.c
@@ -48,7 +48,7 @@
static struct early_serial8250_device early_device;
-static unsigned int __init serial_in(struct uart_port *port, int offset)
+unsigned int __weak __init serial8250_early_in(struct uart_port *port, int offset)
{
switch (port->iotype) {
case UPIO_MEM:
@@ -62,7 +62,7 @@
}
}
-static void __init serial_out(struct uart_port *port, int offset, int value)
+void __weak __init serial8250_early_out(struct uart_port *port, int offset, int value)
{
switch (port->iotype) {
case UPIO_MEM:
@@ -84,7 +84,7 @@
unsigned int status;
for (;;) {
- status = serial_in(port, UART_LSR);
+ status = serial8250_early_in(port, UART_LSR);
if ((status & BOTH_EMPTY) == BOTH_EMPTY)
return;
cpu_relax();
@@ -94,7 +94,7 @@
static void __init serial_putc(struct uart_port *port, int c)
{
wait_for_xmitr(port);
- serial_out(port, UART_TX, c);
+ serial8250_early_out(port, UART_TX, c);
}
static void __init early_serial8250_write(struct console *console,
@@ -104,14 +104,14 @@
unsigned int ier;
/* Save the IER and disable interrupts */
- ier = serial_in(port, UART_IER);
- serial_out(port, UART_IER, 0);
+ ier = serial8250_early_in(port, UART_IER);
+ serial8250_early_out(port, UART_IER, 0);
uart_console_write(port, s, count, serial_putc);
/* Wait for transmitter to become empty and restore the IER */
wait_for_xmitr(port);
- serial_out(port, UART_IER, ier);
+ serial8250_early_out(port, UART_IER, ier);
}
static unsigned int __init probe_baud(struct uart_port *port)
@@ -119,11 +119,11 @@
unsigned char lcr, dll, dlm;
unsigned int quot;
- lcr = serial_in(port, UART_LCR);
- serial_out(port, UART_LCR, lcr | UART_LCR_DLAB);
- dll = serial_in(port, UART_DLL);
- dlm = serial_in(port, UART_DLM);
- serial_out(port, UART_LCR, lcr);
+ lcr = serial8250_early_in(port, UART_LCR);
+ serial8250_early_out(port, UART_LCR, lcr | UART_LCR_DLAB);
+ dll = serial8250_early_in(port, UART_DLL);
+ dlm = serial8250_early_in(port, UART_DLM);
+ serial8250_early_out(port, UART_LCR, lcr);
quot = (dlm << 8) | dll;
return (port->uartclk / 16) / quot;
@@ -135,17 +135,17 @@
unsigned int divisor;
unsigned char c;
- serial_out(port, UART_LCR, 0x3); /* 8n1 */
- serial_out(port, UART_IER, 0); /* no interrupt */
- serial_out(port, UART_FCR, 0); /* no fifo */
- serial_out(port, UART_MCR, 0x3); /* DTR + RTS */
+ serial8250_early_out(port, UART_LCR, 0x3); /* 8n1 */
+ serial8250_early_out(port, UART_IER, 0); /* no interrupt */
+ serial8250_early_out(port, UART_FCR, 0); /* no fifo */
+ serial8250_early_out(port, UART_MCR, 0x3); /* DTR + RTS */
- divisor = port->uartclk / (16 * device->baud);
- c = serial_in(port, UART_LCR);
- serial_out(port, UART_LCR, c | UART_LCR_DLAB);
- serial_out(port, UART_DLL, divisor & 0xff);
- serial_out(port, UART_DLM, (divisor >> 8) & 0xff);
- serial_out(port, UART_LCR, c & ~UART_LCR_DLAB);
+ divisor = DIV_ROUND_CLOSEST(port->uartclk, 16 * device->baud);
+ c = serial8250_early_in(port, UART_LCR);
+ serial8250_early_out(port, UART_LCR, c | UART_LCR_DLAB);
+ serial8250_early_out(port, UART_DLL, divisor & 0xff);
+ serial8250_early_out(port, UART_DLM, (divisor >> 8) & 0xff);
+ serial8250_early_out(port, UART_LCR, c & ~UART_LCR_DLAB);
}
static int __init parse_options(struct early_serial8250_device *device,
diff --git a/drivers/tty/serial/8250/8250_em.c b/drivers/tty/serial/8250/8250_em.c
index 3a0363e..916cc19 100644
--- a/drivers/tty/serial/8250/8250_em.c
+++ b/drivers/tty/serial/8250/8250_em.c
@@ -89,7 +89,7 @@
serial_out(up, UART_DLM_EM, value >> 8 & 0xff);
}
-static int __devinit serial8250_em_probe(struct platform_device *pdev)
+static int serial8250_em_probe(struct platform_device *pdev)
{
struct resource *regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
struct resource *irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
@@ -152,7 +152,7 @@
return ret;
}
-static int __devexit serial8250_em_remove(struct platform_device *pdev)
+static int serial8250_em_remove(struct platform_device *pdev)
{
struct serial8250_em_priv *priv = platform_get_drvdata(pdev);
@@ -163,7 +163,7 @@
return 0;
}
-static const struct of_device_id serial8250_em_dt_ids[] __devinitconst = {
+static const struct of_device_id serial8250_em_dt_ids[] = {
{ .compatible = "renesas,em-uart", },
{},
};
@@ -176,7 +176,7 @@
.owner = THIS_MODULE,
},
.probe = serial8250_em_probe,
- .remove = __devexit_p(serial8250_em_remove),
+ .remove = serial8250_em_remove,
};
module_platform_driver(serial8250_em_platform_driver);
diff --git a/drivers/tty/serial/8250/8250_hp300.c b/drivers/tty/serial/8250/8250_hp300.c
index f3d0edf..5bdaf27 100644
--- a/drivers/tty/serial/8250/8250_hp300.c
+++ b/drivers/tty/serial/8250/8250_hp300.c
@@ -36,9 +36,9 @@
#ifdef CONFIG_HPDCA
-static int __devinit hpdca_init_one(struct dio_dev *d,
+static int hpdca_init_one(struct dio_dev *d,
const struct dio_device_id *ent);
-static void __devexit hpdca_remove_one(struct dio_dev *d);
+static void hpdca_remove_one(struct dio_dev *d);
static struct dio_device_id hpdca_dio_tbl[] = {
{ DIO_ID_DCA0 },
@@ -52,7 +52,7 @@
.name = "hpdca",
.id_table = hpdca_dio_tbl,
.probe = hpdca_init_one,
- .remove = __devexit_p(hpdca_remove_one),
+ .remove = hpdca_remove_one,
};
#endif
@@ -159,7 +159,7 @@
#endif /* CONFIG_SERIAL_8250_CONSOLE */
#ifdef CONFIG_HPDCA
-static int __devinit hpdca_init_one(struct dio_dev *d,
+static int hpdca_init_one(struct dio_dev *d,
const struct dio_device_id *ent)
{
struct uart_8250_port uart;
@@ -288,7 +288,7 @@
}
#ifdef CONFIG_HPDCA
-static void __devexit hpdca_remove_one(struct dio_dev *d)
+static void hpdca_remove_one(struct dio_dev *d)
{
int line;
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 17b7d26..26b9dc0 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -288,7 +288,7 @@
return 0;
}
-static void __devexit pci_plx9050_exit(struct pci_dev *dev)
+static void pci_plx9050_exit(struct pci_dev *dev)
{
u8 __iomem *p;
@@ -313,7 +313,7 @@
#define NI8420_INT_ENABLE_REG 0x38
#define NI8420_INT_ENABLE_BIT 0x2000
-static void __devexit pci_ni8420_exit(struct pci_dev *dev)
+static void pci_ni8420_exit(struct pci_dev *dev)
{
void __iomem *p;
unsigned long base, len;
@@ -345,7 +345,7 @@
#define MITE_LCIMR2_CLR_CPU_IE (1 << 30)
-static void __devexit pci_ni8430_exit(struct pci_dev *dev)
+static void pci_ni8430_exit(struct pci_dev *dev)
{
void __iomem *p;
unsigned long base, len;
@@ -422,7 +422,7 @@
* Disables the global interrupt of PMC-OctalPro
*/
-static void __devexit sbs_exit(struct pci_dev *dev)
+static void sbs_exit(struct pci_dev *dev)
{
u8 __iomem *p;
@@ -991,7 +991,7 @@
return ret;
}
-static void __devexit pci_ite887x_exit(struct pci_dev *dev)
+static void pci_ite887x_exit(struct pci_dev *dev)
{
u32 ioport;
/* the ioport is bit 0-15 in POSIO0R */
@@ -1068,7 +1068,7 @@
{
int ret;
- ret = setup_port(priv, port, 0, 0, board->reg_shift);
+ ret = setup_port(priv, port, idx, 0, board->reg_shift);
port->port.iotype = UPIO_MEM32;
port->port.type = PORT_XSCALE;
port->port.flags = (port->port.flags | UPF_FIXED_PORT | UPF_FIXED_TYPE);
@@ -1165,6 +1165,94 @@
}
static int
+pci_xr17v35x_setup(struct serial_private *priv,
+ const struct pciserial_board *board,
+ struct uart_8250_port *port, int idx)
+{
+ u8 __iomem *p;
+
+ p = pci_ioremap_bar(priv->dev, 0);
+ if (p == NULL)
+ return -ENOMEM;
+
+ port->port.flags |= UPF_EXAR_EFR;
+
+ /*
+ * Setup Multipurpose Input/Output pins.
+ */
+ if (idx == 0) {
+ writeb(0x00, p + 0x8f); /*MPIOINT[7:0]*/
+ writeb(0x00, p + 0x90); /*MPIOLVL[7:0]*/
+ writeb(0x00, p + 0x91); /*MPIO3T[7:0]*/
+ writeb(0x00, p + 0x92); /*MPIOINV[7:0]*/
+ writeb(0x00, p + 0x93); /*MPIOSEL[7:0]*/
+ writeb(0x00, p + 0x94); /*MPIOOD[7:0]*/
+ writeb(0x00, p + 0x95); /*MPIOINT[15:8]*/
+ writeb(0x00, p + 0x96); /*MPIOLVL[15:8]*/
+ writeb(0x00, p + 0x97); /*MPIO3T[15:8]*/
+ writeb(0x00, p + 0x98); /*MPIOINV[15:8]*/
+ writeb(0x00, p + 0x99); /*MPIOSEL[15:8]*/
+ writeb(0x00, p + 0x9a); /*MPIOOD[15:8]*/
+ }
+ writeb(0x00, p + UART_EXAR_8XMODE);
+ writeb(UART_FCTR_EXAR_TRGD, p + UART_EXAR_FCTR);
+ writeb(128, p + UART_EXAR_TXTRG);
+ writeb(128, p + UART_EXAR_RXTRG);
+ iounmap(p);
+
+ return pci_default_setup(priv, board, port, idx);
+}
+
+#define PCI_DEVICE_ID_COMMTECH_4222PCI335 0x0004
+#define PCI_DEVICE_ID_COMMTECH_4224PCI335 0x0002
+#define PCI_DEVICE_ID_COMMTECH_2324PCI335 0x000a
+#define PCI_DEVICE_ID_COMMTECH_2328PCI335 0x000b
+
+static int
+pci_fastcom335_setup(struct serial_private *priv,
+ const struct pciserial_board *board,
+ struct uart_8250_port *port, int idx)
+{
+ u8 __iomem *p;
+
+ p = pci_ioremap_bar(priv->dev, 0);
+ if (p == NULL)
+ return -ENOMEM;
+
+ port->port.flags |= UPF_EXAR_EFR;
+
+ /*
+ * Setup Multipurpose Input/Output pins.
+ */
+ if (idx == 0) {
+ switch (priv->dev->device) {
+ case PCI_DEVICE_ID_COMMTECH_4222PCI335:
+ case PCI_DEVICE_ID_COMMTECH_4224PCI335:
+ writeb(0x78, p + 0x90); /* MPIOLVL[7:0] */
+ writeb(0x00, p + 0x92); /* MPIOINV[7:0] */
+ writeb(0x00, p + 0x93); /* MPIOSEL[7:0] */
+ break;
+ case PCI_DEVICE_ID_COMMTECH_2324PCI335:
+ case PCI_DEVICE_ID_COMMTECH_2328PCI335:
+ writeb(0x00, p + 0x90); /* MPIOLVL[7:0] */
+ writeb(0xc0, p + 0x92); /* MPIOINV[7:0] */
+ writeb(0xc0, p + 0x93); /* MPIOSEL[7:0] */
+ break;
+ }
+ writeb(0x00, p + 0x8f); /* MPIOINT[7:0] */
+ writeb(0x00, p + 0x91); /* MPIO3T[7:0] */
+ writeb(0x00, p + 0x94); /* MPIOOD[7:0] */
+ }
+ writeb(0x00, p + UART_EXAR_8XMODE);
+ writeb(UART_FCTR_EXAR_TRGD, p + UART_EXAR_FCTR);
+ writeb(32, p + UART_EXAR_TXTRG);
+ writeb(32, p + UART_EXAR_RXTRG);
+ iounmap(p);
+
+ return pci_default_setup(priv, board, port, idx);
+}
+
+static int
pci_wch_ch353_setup(struct serial_private *priv,
const struct pciserial_board *board,
struct uart_8250_port *port, int idx)
@@ -1213,6 +1301,10 @@
#define PCI_VENDOR_ID_AGESTAR 0x5372
#define PCI_DEVICE_ID_AGESTAR_9375 0x6872
#define PCI_VENDOR_ID_ASIX 0x9710
+#define PCI_DEVICE_ID_COMMTECH_4222PCIE 0x0019
+#define PCI_DEVICE_ID_COMMTECH_4224PCIE 0x0020
+#define PCI_DEVICE_ID_COMMTECH_4228PCIE 0x0021
+
/* Unknown vendors/cards - this should not be in linux/pci_ids.h */
#define PCI_SUBDEVICE_ID_UNKNOWN_0x1584 0x1584
@@ -1314,7 +1406,7 @@
.subdevice = PCI_ANY_ID,
.init = pci_ite887x_init,
.setup = pci_default_setup,
- .exit = __devexit_p(pci_ite887x_exit),
+ .exit = pci_ite887x_exit,
},
/*
* National Instruments
@@ -1326,7 +1418,7 @@
.subdevice = PCI_ANY_ID,
.init = pci_ni8420_init,
.setup = pci_default_setup,
- .exit = __devexit_p(pci_ni8420_exit),
+ .exit = pci_ni8420_exit,
},
{
.vendor = PCI_VENDOR_ID_NI,
@@ -1335,7 +1427,7 @@
.subdevice = PCI_ANY_ID,
.init = pci_ni8420_init,
.setup = pci_default_setup,
- .exit = __devexit_p(pci_ni8420_exit),
+ .exit = pci_ni8420_exit,
},
{
.vendor = PCI_VENDOR_ID_NI,
@@ -1344,7 +1436,7 @@
.subdevice = PCI_ANY_ID,
.init = pci_ni8420_init,
.setup = pci_default_setup,
- .exit = __devexit_p(pci_ni8420_exit),
+ .exit = pci_ni8420_exit,
},
{
.vendor = PCI_VENDOR_ID_NI,
@@ -1353,7 +1445,7 @@
.subdevice = PCI_ANY_ID,
.init = pci_ni8420_init,
.setup = pci_default_setup,
- .exit = __devexit_p(pci_ni8420_exit),
+ .exit = pci_ni8420_exit,
},
{
.vendor = PCI_VENDOR_ID_NI,
@@ -1362,7 +1454,7 @@
.subdevice = PCI_ANY_ID,
.init = pci_ni8420_init,
.setup = pci_default_setup,
- .exit = __devexit_p(pci_ni8420_exit),
+ .exit = pci_ni8420_exit,
},
{
.vendor = PCI_VENDOR_ID_NI,
@@ -1371,7 +1463,7 @@
.subdevice = PCI_ANY_ID,
.init = pci_ni8420_init,
.setup = pci_default_setup,
- .exit = __devexit_p(pci_ni8420_exit),
+ .exit = pci_ni8420_exit,
},
{
.vendor = PCI_VENDOR_ID_NI,
@@ -1380,7 +1472,7 @@
.subdevice = PCI_ANY_ID,
.init = pci_ni8420_init,
.setup = pci_default_setup,
- .exit = __devexit_p(pci_ni8420_exit),
+ .exit = pci_ni8420_exit,
},
{
.vendor = PCI_VENDOR_ID_NI,
@@ -1389,7 +1481,7 @@
.subdevice = PCI_ANY_ID,
.init = pci_ni8420_init,
.setup = pci_default_setup,
- .exit = __devexit_p(pci_ni8420_exit),
+ .exit = pci_ni8420_exit,
},
{
.vendor = PCI_VENDOR_ID_NI,
@@ -1398,7 +1490,7 @@
.subdevice = PCI_ANY_ID,
.init = pci_ni8420_init,
.setup = pci_default_setup,
- .exit = __devexit_p(pci_ni8420_exit),
+ .exit = pci_ni8420_exit,
},
{
.vendor = PCI_VENDOR_ID_NI,
@@ -1407,7 +1499,7 @@
.subdevice = PCI_ANY_ID,
.init = pci_ni8420_init,
.setup = pci_default_setup,
- .exit = __devexit_p(pci_ni8420_exit),
+ .exit = pci_ni8420_exit,
},
{
.vendor = PCI_VENDOR_ID_NI,
@@ -1416,7 +1508,7 @@
.subdevice = PCI_ANY_ID,
.init = pci_ni8420_init,
.setup = pci_default_setup,
- .exit = __devexit_p(pci_ni8420_exit),
+ .exit = pci_ni8420_exit,
},
{
.vendor = PCI_VENDOR_ID_NI,
@@ -1425,7 +1517,7 @@
.subdevice = PCI_ANY_ID,
.init = pci_ni8420_init,
.setup = pci_default_setup,
- .exit = __devexit_p(pci_ni8420_exit),
+ .exit = pci_ni8420_exit,
},
{
.vendor = PCI_VENDOR_ID_NI,
@@ -1434,7 +1526,7 @@
.subdevice = PCI_ANY_ID,
.init = pci_ni8430_init,
.setup = pci_ni8430_setup,
- .exit = __devexit_p(pci_ni8430_exit),
+ .exit = pci_ni8430_exit,
},
/*
* Panacom
@@ -1446,7 +1538,7 @@
.subdevice = PCI_ANY_ID,
.init = pci_plx9050_init,
.setup = pci_default_setup,
- .exit = __devexit_p(pci_plx9050_exit),
+ .exit = pci_plx9050_exit,
},
{
.vendor = PCI_VENDOR_ID_PANACOM,
@@ -1455,7 +1547,7 @@
.subdevice = PCI_ANY_ID,
.init = pci_plx9050_init,
.setup = pci_default_setup,
- .exit = __devexit_p(pci_plx9050_exit),
+ .exit = pci_plx9050_exit,
},
/*
* PLX
@@ -1474,7 +1566,7 @@
.subdevice = PCI_SUBDEVICE_ID_EXSYS_4055,
.init = pci_plx9050_init,
.setup = pci_default_setup,
- .exit = __devexit_p(pci_plx9050_exit),
+ .exit = pci_plx9050_exit,
},
{
.vendor = PCI_VENDOR_ID_PLX,
@@ -1483,7 +1575,7 @@
.subdevice = PCI_SUBDEVICE_ID_KEYSPAN_SX2,
.init = pci_plx9050_init,
.setup = pci_default_setup,
- .exit = __devexit_p(pci_plx9050_exit),
+ .exit = pci_plx9050_exit,
},
{
.vendor = PCI_VENDOR_ID_PLX,
@@ -1492,7 +1584,7 @@
.subdevice = PCI_SUBDEVICE_ID_UNKNOWN_0x1584,
.init = pci_plx9050_init,
.setup = pci_default_setup,
- .exit = __devexit_p(pci_plx9050_exit),
+ .exit = pci_plx9050_exit,
},
{
.vendor = PCI_VENDOR_ID_PLX,
@@ -1501,7 +1593,7 @@
.subdevice = PCI_DEVICE_ID_PLX_ROMULUS,
.init = pci_plx9050_init,
.setup = pci_default_setup,
- .exit = __devexit_p(pci_plx9050_exit),
+ .exit = pci_plx9050_exit,
},
/*
* SBS Technologies, Inc., PMC-OCTALPRO 232
@@ -1513,7 +1605,7 @@
.subdevice = PCI_SUBDEVICE_ID_OCTPRO232,
.init = sbs_init,
.setup = sbs_setup,
- .exit = __devexit_p(sbs_exit),
+ .exit = sbs_exit,
},
/*
* SBS Technologies, Inc., PMC-OCTALPRO 422
@@ -1525,7 +1617,7 @@
.subdevice = PCI_SUBDEVICE_ID_OCTPRO422,
.init = sbs_init,
.setup = sbs_setup,
- .exit = __devexit_p(sbs_exit),
+ .exit = sbs_exit,
},
/*
* SBS Technologies, Inc., P-Octal 232
@@ -1537,7 +1629,7 @@
.subdevice = PCI_SUBDEVICE_ID_POCTAL232,
.init = sbs_init,
.setup = sbs_setup,
- .exit = __devexit_p(sbs_exit),
+ .exit = sbs_exit,
},
/*
* SBS Technologies, Inc., P-Octal 422
@@ -1549,7 +1641,7 @@
.subdevice = PCI_SUBDEVICE_ID_POCTAL422,
.init = sbs_init,
.setup = sbs_setup,
- .exit = __devexit_p(sbs_exit),
+ .exit = sbs_exit,
},
/*
* SIIG cards - these may be called via parport_serial
@@ -1622,6 +1714,27 @@
.subdevice = PCI_ANY_ID,
.setup = pci_xr17c154_setup,
},
+ {
+ .vendor = PCI_VENDOR_ID_EXAR,
+ .device = PCI_DEVICE_ID_EXAR_XR17V352,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_xr17v35x_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_EXAR,
+ .device = PCI_DEVICE_ID_EXAR_XR17V354,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_xr17v35x_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_EXAR,
+ .device = PCI_DEVICE_ID_EXAR_XR17V358,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_xr17v35x_setup,
+ },
/*
* Xircom cards
*/
@@ -1788,6 +1901,59 @@
.setup = pci_asix_setup,
},
/*
+ * Commtech, Inc. Fastcom adapters
+ *
+ */
+ {
+ .vendor = PCI_VENDOR_ID_COMMTECH,
+ .device = PCI_DEVICE_ID_COMMTECH_4222PCI335,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_fastcom335_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_COMMTECH,
+ .device = PCI_DEVICE_ID_COMMTECH_4224PCI335,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_fastcom335_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_COMMTECH,
+ .device = PCI_DEVICE_ID_COMMTECH_2324PCI335,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_fastcom335_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_COMMTECH,
+ .device = PCI_DEVICE_ID_COMMTECH_2328PCI335,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_fastcom335_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_COMMTECH,
+ .device = PCI_DEVICE_ID_COMMTECH_4222PCIE,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_xr17v35x_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_COMMTECH,
+ .device = PCI_DEVICE_ID_COMMTECH_4224PCIE,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_xr17v35x_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_COMMTECH,
+ .device = PCI_DEVICE_ID_COMMTECH_4228PCIE,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_xr17v35x_setup,
+ },
+ /*
* Default "match everything" terminator entry
*/
{
@@ -1863,6 +2029,10 @@
pbn_b0_4_1152000,
+ pbn_b0_2_1152000_200,
+ pbn_b0_4_1152000_200,
+ pbn_b0_8_1152000_200,
+
pbn_b0_2_1843200,
pbn_b0_4_1843200,
@@ -1962,6 +2132,9 @@
pbn_exar_XR17C152,
pbn_exar_XR17C154,
pbn_exar_XR17C158,
+ pbn_exar_XR17V352,
+ pbn_exar_XR17V354,
+ pbn_exar_XR17V358,
pbn_exar_ibm_saturn,
pbn_pasemi_1682M,
pbn_ni8430_2,
@@ -1987,7 +2160,7 @@
* see first lines of serial_in() and serial_out() in 8250.c
*/
-static struct pciserial_board pci_boards[] __devinitdata = {
+static struct pciserial_board pci_boards[] = {
[pbn_default] = {
.flags = FL_BASE0,
.num_ports = 1,
@@ -2057,6 +2230,27 @@
.uart_offset = 8,
},
+ [pbn_b0_2_1152000_200] = {
+ .flags = FL_BASE0,
+ .num_ports = 2,
+ .base_baud = 1152000,
+ .uart_offset = 0x200,
+ },
+
+ [pbn_b0_4_1152000_200] = {
+ .flags = FL_BASE0,
+ .num_ports = 4,
+ .base_baud = 1152000,
+ .uart_offset = 0x200,
+ },
+
+ [pbn_b0_8_1152000_200] = {
+ .flags = FL_BASE0,
+ .num_ports = 2,
+ .base_baud = 1152000,
+ .uart_offset = 0x200,
+ },
+
[pbn_b0_2_1843200] = {
.flags = FL_BASE0,
.num_ports = 2,
@@ -2580,6 +2774,30 @@
.base_baud = 921600,
.uart_offset = 0x200,
},
+ [pbn_exar_XR17V352] = {
+ .flags = FL_BASE0,
+ .num_ports = 2,
+ .base_baud = 7812500,
+ .uart_offset = 0x400,
+ .reg_shift = 0,
+ .first_offset = 0,
+ },
+ [pbn_exar_XR17V354] = {
+ .flags = FL_BASE0,
+ .num_ports = 4,
+ .base_baud = 7812500,
+ .uart_offset = 0x400,
+ .reg_shift = 0,
+ .first_offset = 0,
+ },
+ [pbn_exar_XR17V358] = {
+ .flags = FL_BASE0,
+ .num_ports = 8,
+ .base_baud = 7812500,
+ .uart_offset = 0x400,
+ .reg_shift = 0,
+ .first_offset = 0,
+ },
[pbn_exar_ibm_saturn] = {
.flags = FL_BASE0,
.num_ports = 1,
@@ -2658,8 +2876,8 @@
.first_offset = 0x1000,
},
[pbn_ce4100_1_115200] = {
- .flags = FL_BASE0,
- .num_ports = 1,
+ .flags = FL_BASE_BARS,
+ .num_ports = 2,
.base_baud = 921600,
.reg_shift = 2,
},
@@ -2691,7 +2909,7 @@
* guess what the configuration might be, based on the pitiful PCI
* serial specs. Returns 0 on success, 1 on failure.
*/
-static int __devinit
+static int
serial_pci_guess_board(struct pci_dev *dev, struct pciserial_board *board)
{
const struct pci_device_id *bldev;
@@ -2917,7 +3135,7 @@
* Probe one serial board. Unfortunately, there is no rhyme nor reason
* to the arrangement of serial ports on a PCI card.
*/
-static int __devinit
+static int
pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent)
{
struct pci_serial_quirk *quirk;
@@ -2988,7 +3206,7 @@
return rc;
}
-static void __devexit pciserial_remove_one(struct pci_dev *dev)
+static void pciserial_remove_one(struct pci_dev *dev)
{
struct serial_private *priv = pci_get_drvdata(dev);
@@ -3826,6 +4044,21 @@
PCI_ANY_ID, PCI_ANY_ID,
0,
0, pbn_exar_XR17C158 },
+ /*
+ * Exar Corp. XR17V35[248] Dual/Quad/Octal PCIe UARTs
+ */
+ { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17V352,
+ PCI_ANY_ID, PCI_ANY_ID,
+ 0,
+ 0, pbn_exar_XR17V352 },
+ { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17V354,
+ PCI_ANY_ID, PCI_ANY_ID,
+ 0,
+ 0, pbn_exar_XR17V354 },
+ { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17V358,
+ PCI_ANY_ID, PCI_ANY_ID,
+ 0,
+ 0, pbn_exar_XR17V358 },
/*
* Topic TP560 Data/Fax/Voice 56k modem (reported by Evan Clarke)
@@ -4257,6 +4490,38 @@
0, 0, pbn_b0_bt_2_115200 },
/*
+ * Commtech, Inc. Fastcom adapters
+ */
+ { PCI_VENDOR_ID_COMMTECH, PCI_DEVICE_ID_COMMTECH_4222PCI335,
+ PCI_ANY_ID, PCI_ANY_ID,
+ 0,
+ 0, pbn_b0_2_1152000_200 },
+ { PCI_VENDOR_ID_COMMTECH, PCI_DEVICE_ID_COMMTECH_4224PCI335,
+ PCI_ANY_ID, PCI_ANY_ID,
+ 0,
+ 0, pbn_b0_4_1152000_200 },
+ { PCI_VENDOR_ID_COMMTECH, PCI_DEVICE_ID_COMMTECH_2324PCI335,
+ PCI_ANY_ID, PCI_ANY_ID,
+ 0,
+ 0, pbn_b0_4_1152000_200 },
+ { PCI_VENDOR_ID_COMMTECH, PCI_DEVICE_ID_COMMTECH_2328PCI335,
+ PCI_ANY_ID, PCI_ANY_ID,
+ 0,
+ 0, pbn_b0_8_1152000_200 },
+ { PCI_VENDOR_ID_COMMTECH, PCI_DEVICE_ID_COMMTECH_4222PCIE,
+ PCI_ANY_ID, PCI_ANY_ID,
+ 0,
+ 0, pbn_exar_XR17V352 },
+ { PCI_VENDOR_ID_COMMTECH, PCI_DEVICE_ID_COMMTECH_4224PCIE,
+ PCI_ANY_ID, PCI_ANY_ID,
+ 0,
+ 0, pbn_exar_XR17V354 },
+ { PCI_VENDOR_ID_COMMTECH, PCI_DEVICE_ID_COMMTECH_4228PCIE,
+ PCI_ANY_ID, PCI_ANY_ID,
+ 0,
+ 0, pbn_exar_XR17V358 },
+
+ /*
* These entries match devices with class COMMUNICATION_SERIAL,
* COMMUNICATION_MODEM or COMMUNICATION_MULTISERIAL
*/
@@ -4323,7 +4588,7 @@
static struct pci_driver serial_pci_driver = {
.name = "serial",
.probe = pciserial_init_one,
- .remove = __devexit_p(pciserial_remove_one),
+ .remove = pciserial_remove_one,
#ifdef CONFIG_PM
.suspend = pciserial_suspend_one,
.resume = pciserial_resume_one,
@@ -4332,18 +4597,7 @@
.err_handler = &serial8250_err_handler,
};
-static int __init serial8250_pci_init(void)
-{
- return pci_register_driver(&serial_pci_driver);
-}
-
-static void __exit serial8250_pci_exit(void)
-{
- pci_unregister_driver(&serial_pci_driver);
-}
-
-module_init(serial8250_pci_init);
-module_exit(serial8250_pci_exit);
+module_pci_driver(serial_pci_driver);
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Generic 8250/16x50 PCI serial probe module");
diff --git a/drivers/tty/serial/8250/8250_pnp.c b/drivers/tty/serial/8250/8250_pnp.c
index f8ee250..35d9ab9 100644
--- a/drivers/tty/serial/8250/8250_pnp.c
+++ b/drivers/tty/serial/8250/8250_pnp.c
@@ -370,14 +370,14 @@
MODULE_DEVICE_TABLE(pnp, pnp_dev_table);
-static char *modem_names[] __devinitdata = {
+static char *modem_names[] = {
"MODEM", "Modem", "modem", "FAX", "Fax", "fax",
"56K", "56k", "K56", "33.6", "28.8", "14.4",
"33,600", "28,800", "14,400", "33.600", "28.800", "14.400",
"33600", "28800", "14400", "V.90", "V.34", "V.32", NULL
};
-static int __devinit check_name(char *name)
+static int check_name(char *name)
{
char **tmp;
@@ -388,7 +388,7 @@
return 0;
}
-static int __devinit check_resources(struct pnp_dev *dev)
+static int check_resources(struct pnp_dev *dev)
{
resource_size_t base[] = {0x2f8, 0x3f8, 0x2e8, 0x3e8};
int i;
@@ -412,7 +412,7 @@
* PnP modems, alternatively we must hardcode all modems in pnp_devices[]
* table.
*/
-static int __devinit serial_pnp_guess_board(struct pnp_dev *dev)
+static int serial_pnp_guess_board(struct pnp_dev *dev)
{
if (!(check_name(pnp_dev_name(dev)) ||
(dev->card && check_name(dev->card->name))))
@@ -424,7 +424,7 @@
return -ENODEV;
}
-static int __devinit
+static int
serial_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id)
{
struct uart_8250_port uart;
@@ -476,7 +476,7 @@
return 0;
}
-static void __devexit serial_pnp_remove(struct pnp_dev *dev)
+static void serial_pnp_remove(struct pnp_dev *dev)
{
long line = (long)pnp_get_drvdata(dev);
if (line)
@@ -511,7 +511,7 @@
static struct pnp_driver serial_pnp_driver = {
.name = "serial",
.probe = serial_pnp_probe,
- .remove = __devexit_p(serial_pnp_remove),
+ .remove = serial_pnp_remove,
.suspend = serial_pnp_suspend,
.resume = serial_pnp_resume,
.id_table = pnp_dev_table,
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 2a53be5..59c23d0 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -93,7 +93,7 @@
config SERIAL_ATMEL
bool "AT91 / AT32 on-chip serial port support"
- depends on (ARM && ARCH_AT91) || AVR32
+ depends on ARCH_AT91 || AVR32
select SERIAL_CORE
help
This enables the driver for the on-chip UARTs of the Atmel
@@ -198,7 +198,7 @@
config SERIAL_SAMSUNG
tristate "Samsung SoC serial support"
- depends on ARM && PLAT_SAMSUNG
+ depends on PLAT_SAMSUNG
select SERIAL_CORE
help
Support for the on-chip UARTs on the Samsung S3C24XX series CPUs,
@@ -208,14 +208,14 @@
config SERIAL_SAMSUNG_UARTS_4
bool
- depends on ARM && PLAT_SAMSUNG
+ depends on PLAT_SAMSUNG
default y if !(CPU_S3C2410 || SERIAL_S3C2412 || CPU_S3C2440 || CPU_S3C2442)
help
Internal node for the common case of 4 Samsung compatible UARTs
config SERIAL_SAMSUNG_UARTS
int
- depends on ARM && PLAT_SAMSUNG
+ depends on PLAT_SAMSUNG
default 6 if ARCH_S5P6450
default 4 if SERIAL_SAMSUNG_UARTS_4 || CPU_S3C2416
default 3
@@ -249,7 +249,7 @@
config SERIAL_SIRFSOC
tristate "SiRF SoC Platform Serial port support"
- depends on ARM && ARCH_PRIMA2
+ depends on ARCH_PRIMA2
select SERIAL_CORE
help
Support for the on-chip UART on the CSR SiRFprimaII series,
@@ -347,7 +347,7 @@
config SERIAL_21285
tristate "DC21285 serial port support"
- depends on ARM && FOOTBRIDGE
+ depends on FOOTBRIDGE
select SERIAL_CORE
help
If you have a machine based on a 21285 (Footbridge) StrongARM(R)/
@@ -371,7 +371,7 @@
config SERIAL_MPSC
bool "Marvell MPSC serial port support"
- depends on PPC32 && MV64X60
+ depends on MV64X60
select SERIAL_CORE
help
Say Y here if you want to use the Marvell MPSC serial controller.
@@ -408,7 +408,7 @@
config SERIAL_SA1100
bool "SA1100 serial port support"
- depends on ARM && ARCH_SA1100
+ depends on ARCH_SA1100
select SERIAL_CORE
help
If you have a machine based on a SA1100/SA1110 StrongARM(R) CPU you
@@ -716,7 +716,7 @@
config SERIAL_PNX8XXX
bool "Enable PNX8XXX SoCs' UART Support"
- depends on MIPS && (SOC_PNX8550 || SOC_PNX833X)
+ depends on SOC_PNX8550 || SOC_PNX833X
select SERIAL_CORE
help
If you have a MIPS-based Philips SoC such as PNX8550 or PNX8330
@@ -1013,7 +1013,7 @@
config SERIAL_MSM
bool "MSM on-chip serial port support"
- depends on ARM && ARCH_MSM
+ depends on ARCH_MSM
select SERIAL_CORE
config SERIAL_MSM_CONSOLE
@@ -1035,7 +1035,7 @@
config SERIAL_VT8500
bool "VIA VT8500 on-chip serial port support"
- depends on ARM && ARCH_VT8500
+ depends on ARCH_VT8500
select SERIAL_CORE
config SERIAL_VT8500_CONSOLE
@@ -1045,7 +1045,7 @@
config SERIAL_NETX
tristate "NetX serial port support"
- depends on ARM && ARCH_NETX
+ depends on ARCH_NETX
select SERIAL_CORE
help
If you have a machine based on a Hilscher NetX SoC you
@@ -1376,6 +1376,7 @@
config SERIAL_XILINX_PS_UART
tristate "Xilinx PS UART support"
+ depends on OF
select SERIAL_CORE
help
This driver supports the Xilinx PS UART port.
@@ -1423,4 +1424,27 @@
depends on SERIAL_EFM32_UART=y
select SERIAL_CORE_CONSOLE
+config SERIAL_ARC
+ tristate "ARC UART driver support"
+ select SERIAL_CORE
+ help
+ Driver for on-chip UART for ARC(Synopsys) for the legacy
+ FPGA Boards (ML50x/ARCAngel4)
+
+config SERIAL_ARC_CONSOLE
+ bool "Console on ARC UART"
+ depends on SERIAL_ARC=y
+ select SERIAL_CORE_CONSOLE
+ help
+ Enable system Console on ARC UART
+
+config SERIAL_ARC_NR_PORTS
+ int "Number of ARC UART ports"
+ depends on SERIAL_ARC
+ range 1 3
+ default "1"
+ help
+ Set this to the number of serial ports you want the driver
+ to support.
+
endmenu
diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
index 4f694da..df1b998 100644
--- a/drivers/tty/serial/Makefile
+++ b/drivers/tty/serial/Makefile
@@ -82,3 +82,4 @@
obj-$(CONFIG_SERIAL_SIRFSOC) += sirfsoc_uart.o
obj-$(CONFIG_SERIAL_AR933X) += ar933x_uart.o
obj-$(CONFIG_SERIAL_EFM32_UART) += efm32-uart.o
+obj-$(CONFIG_SERIAL_ARC) += arc_uart.o
diff --git a/drivers/tty/serial/altera_jtaguart.c b/drivers/tty/serial/altera_jtaguart.c
index 530181e..872f14a 100644
--- a/drivers/tty/serial/altera_jtaguart.c
+++ b/drivers/tty/serial/altera_jtaguart.c
@@ -406,7 +406,7 @@
.cons = ALTERA_JTAGUART_CONSOLE,
};
-static int __devinit altera_jtaguart_probe(struct platform_device *pdev)
+static int altera_jtaguart_probe(struct platform_device *pdev)
{
struct altera_jtaguart_platform_uart *platp = pdev->dev.platform_data;
struct uart_port *port;
@@ -453,7 +453,7 @@
return 0;
}
-static int __devexit altera_jtaguart_remove(struct platform_device *pdev)
+static int altera_jtaguart_remove(struct platform_device *pdev)
{
struct uart_port *port;
int i = pdev->id;
@@ -477,7 +477,7 @@
static struct platform_driver altera_jtaguart_platform_driver = {
.probe = altera_jtaguart_probe,
- .remove = __devexit_p(altera_jtaguart_remove),
+ .remove = altera_jtaguart_remove,
.driver = {
.name = DRV_NAME,
.owner = THIS_MODULE,
diff --git a/drivers/tty/serial/altera_uart.c b/drivers/tty/serial/altera_uart.c
index 15d80b9..684a080 100644
--- a/drivers/tty/serial/altera_uart.c
+++ b/drivers/tty/serial/altera_uart.c
@@ -532,7 +532,7 @@
}
#endif /* CONFIG_OF */
-static int __devinit altera_uart_probe(struct platform_device *pdev)
+static int altera_uart_probe(struct platform_device *pdev)
{
struct altera_uart_platform_uart *platp = pdev->dev.platform_data;
struct uart_port *port;
@@ -598,7 +598,7 @@
return 0;
}
-static int __devexit altera_uart_remove(struct platform_device *pdev)
+static int altera_uart_remove(struct platform_device *pdev)
{
struct uart_port *port = platform_get_drvdata(pdev);
@@ -621,7 +621,7 @@
static struct platform_driver altera_uart_platform_driver = {
.probe = altera_uart_probe,
- .remove = __devexit_p(altera_uart_remove),
+ .remove = altera_uart_remove,
.driver = {
.name = DRV_NAME,
.owner = THIS_MODULE,
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index d7e1ede..7fca402 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -56,8 +56,7 @@
#include <linux/of_device.h>
#include <linux/pinctrl/consumer.h>
#include <linux/sizes.h>
-
-#include <asm/io.h>
+#include <linux/io.h>
#define UART_NR 14
@@ -1973,7 +1972,8 @@
goto out;
}
- uap = kzalloc(sizeof(struct uart_amba_port), GFP_KERNEL);
+ uap = devm_kzalloc(&dev->dev, sizeof(struct uart_amba_port),
+ GFP_KERNEL);
if (uap == NULL) {
ret = -ENOMEM;
goto out;
@@ -1981,16 +1981,17 @@
i = pl011_probe_dt_alias(i, &dev->dev);
- base = ioremap(dev->res.start, resource_size(&dev->res));
+ base = devm_ioremap(&dev->dev, dev->res.start,
+ resource_size(&dev->res));
if (!base) {
ret = -ENOMEM;
- goto free;
+ goto out;
}
uap->pinctrl = devm_pinctrl_get(&dev->dev);
if (IS_ERR(uap->pinctrl)) {
ret = PTR_ERR(uap->pinctrl);
- goto unmap;
+ goto out;
}
uap->pins_default = pinctrl_lookup_state(uap->pinctrl,
PINCTRL_STATE_DEFAULT);
@@ -2002,10 +2003,10 @@
if (IS_ERR(uap->pins_sleep))
dev_dbg(&dev->dev, "could not get sleep pinstate\n");
- uap->clk = clk_get(&dev->dev, NULL);
+ uap->clk = devm_clk_get(&dev->dev, NULL);
if (IS_ERR(uap->clk)) {
ret = PTR_ERR(uap->clk);
- goto unmap;
+ goto out;
}
uap->vendor = vendor;
@@ -2038,11 +2039,6 @@
amba_set_drvdata(dev, NULL);
amba_ports[i] = NULL;
pl011_dma_remove(uap);
- clk_put(uap->clk);
- unmap:
- iounmap(base);
- free:
- kfree(uap);
}
out:
return ret;
@@ -2062,9 +2058,6 @@
amba_ports[i] = NULL;
pl011_dma_remove(uap);
- iounmap(uap->port.membase);
- clk_put(uap->clk);
- kfree(uap);
return 0;
}
diff --git a/drivers/tty/serial/apbuart.c b/drivers/tty/serial/apbuart.c
index 7162f70..59ae2b5 100644
--- a/drivers/tty/serial/apbuart.c
+++ b/drivers/tty/serial/apbuart.c
@@ -554,7 +554,7 @@
/* OF Platform Driver */
/* ======================================================================== */
-static int __devinit apbuart_probe(struct platform_device *op)
+static int apbuart_probe(struct platform_device *op)
{
int i;
struct uart_port *port = NULL;
diff --git a/drivers/tty/serial/ar933x_uart.c b/drivers/tty/serial/ar933x_uart.c
index e4f60e2..505c490 100644
--- a/drivers/tty/serial/ar933x_uart.c
+++ b/drivers/tty/serial/ar933x_uart.c
@@ -25,11 +25,19 @@
#include <linux/io.h>
#include <linux/irq.h>
+#include <asm/div64.h>
+
#include <asm/mach-ath79/ar933x_uart.h>
#include <asm/mach-ath79/ar933x_uart_platform.h>
#define DRIVER_NAME "ar933x-uart"
+#define AR933X_UART_MAX_SCALE 0xff
+#define AR933X_UART_MAX_STEP 0xffff
+
+#define AR933X_UART_MIN_BAUD 300
+#define AR933X_UART_MAX_BAUD 3000000
+
#define AR933X_DUMMY_STATUS_RD 0x01
static struct uart_driver ar933x_uart_driver;
@@ -37,6 +45,8 @@
struct ar933x_uart_port {
struct uart_port port;
unsigned int ier; /* shadow Interrupt Enable Register */
+ unsigned int min_baud;
+ unsigned int max_baud;
};
static inline unsigned int ar933x_uart_read(struct ar933x_uart_port *up,
@@ -162,6 +172,57 @@
{
}
+/*
+ * baudrate = (clk / (scale + 1)) * (step * (1 / 2^17))
+ */
+static unsigned long ar933x_uart_get_baud(unsigned int clk,
+ unsigned int scale,
+ unsigned int step)
+{
+ u64 t;
+ u32 div;
+
+ div = (2 << 16) * (scale + 1);
+ t = clk;
+ t *= step;
+ t += (div / 2);
+ do_div(t, div);
+
+ return t;
+}
+
+static void ar933x_uart_get_scale_step(unsigned int clk,
+ unsigned int baud,
+ unsigned int *scale,
+ unsigned int *step)
+{
+ unsigned int tscale;
+ long min_diff;
+
+ *scale = 0;
+ *step = 0;
+
+ min_diff = baud;
+ for (tscale = 0; tscale < AR933X_UART_MAX_SCALE; tscale++) {
+ u64 tstep;
+ int diff;
+
+ tstep = baud * (tscale + 1);
+ tstep *= (2 << 16);
+ do_div(tstep, clk);
+
+ if (tstep > AR933X_UART_MAX_STEP)
+ break;
+
+ diff = abs(ar933x_uart_get_baud(clk, tscale, tstep) - baud);
+ if (diff < min_diff) {
+ min_diff = diff;
+ *scale = tscale;
+ *step = tstep;
+ }
+ }
+}
+
static void ar933x_uart_set_termios(struct uart_port *port,
struct ktermios *new,
struct ktermios *old)
@@ -169,7 +230,7 @@
struct ar933x_uart_port *up = (struct ar933x_uart_port *) port;
unsigned int cs;
unsigned long flags;
- unsigned int baud, scale;
+ unsigned int baud, scale, step;
/* Only CS8 is supported */
new->c_cflag &= ~CSIZE;
@@ -191,8 +252,8 @@
/* Mark/space parity is not supported */
new->c_cflag &= ~CMSPAR;
- baud = uart_get_baud_rate(port, new, old, 0, port->uartclk / 16);
- scale = (port->uartclk / (16 * baud)) - 1;
+ baud = uart_get_baud_rate(port, new, old, up->min_baud, up->max_baud);
+ ar933x_uart_get_scale_step(port->uartclk, baud, &scale, &step);
/*
* Ok, we're now changing the port state. Do it with
@@ -200,6 +261,10 @@
*/
spin_lock_irqsave(&up->port.lock, flags);
+ /* disable the UART */
+ ar933x_uart_rmw_clear(up, AR933X_UART_CS_REG,
+ AR933X_UART_CS_IF_MODE_M << AR933X_UART_CS_IF_MODE_S);
+
/* Update the per-port timeout. */
uart_update_timeout(port, new->c_cflag, baud);
@@ -210,7 +275,7 @@
up->port.ignore_status_mask |= AR933X_DUMMY_STATUS_RD;
ar933x_uart_write(up, AR933X_UART_CLOCK_REG,
- scale << AR933X_UART_CLOCK_SCALE_S | 8192);
+ scale << AR933X_UART_CLOCK_SCALE_S | step);
/* setup configuration register */
ar933x_uart_rmw(up, AR933X_UART_CS_REG, AR933X_UART_CS_PARITY_M, cs);
@@ -219,6 +284,11 @@
ar933x_uart_rmw_set(up, AR933X_UART_CS_REG,
AR933X_UART_CS_HOST_INT_EN);
+ /* reenable the UART */
+ ar933x_uart_rmw(up, AR933X_UART_CS_REG,
+ AR933X_UART_CS_IF_MODE_M << AR933X_UART_CS_IF_MODE_S,
+ AR933X_UART_CS_IF_MODE_DCE << AR933X_UART_CS_IF_MODE_S);
+
spin_unlock_irqrestore(&up->port.lock, flags);
if (tty_termios_baud_rate(new))
@@ -401,6 +471,8 @@
static int ar933x_uart_verify_port(struct uart_port *port,
struct serial_struct *ser)
{
+ struct ar933x_uart_port *up = (struct ar933x_uart_port *) port;
+
if (ser->type != PORT_UNKNOWN &&
ser->type != PORT_AR933X)
return -EINVAL;
@@ -408,7 +480,8 @@
if (ser->irq < 0 || ser->irq >= NR_IRQS)
return -EINVAL;
- if (ser->baud_base < 28800)
+ if (ser->baud_base < up->min_baud ||
+ ser->baud_base > up->max_baud)
return -EINVAL;
return 0;
@@ -554,13 +627,14 @@
.cons = AR933X_SERIAL_CONSOLE,
};
-static int __devinit ar933x_uart_probe(struct platform_device *pdev)
+static int ar933x_uart_probe(struct platform_device *pdev)
{
struct ar933x_uart_platform_data *pdata;
struct ar933x_uart_port *up;
struct uart_port *port;
struct resource *mem_res;
struct resource *irq_res;
+ unsigned int baud;
int id;
int ret;
@@ -611,6 +685,12 @@
port->fifosize = AR933X_UART_FIFO_SIZE;
port->ops = &ar933x_uart_ops;
+ baud = ar933x_uart_get_baud(port->uartclk, AR933X_UART_MAX_SCALE, 1);
+ up->min_baud = max_t(unsigned int, baud, AR933X_UART_MIN_BAUD);
+
+ baud = ar933x_uart_get_baud(port->uartclk, 0, AR933X_UART_MAX_STEP);
+ up->max_baud = min_t(unsigned int, baud, AR933X_UART_MAX_BAUD);
+
ar933x_uart_add_console_port(up);
ret = uart_add_one_port(&ar933x_uart_driver, &up->port);
@@ -627,7 +707,7 @@
return ret;
}
-static int __devexit ar933x_uart_remove(struct platform_device *pdev)
+static int ar933x_uart_remove(struct platform_device *pdev)
{
struct ar933x_uart_port *up;
@@ -645,7 +725,7 @@
static struct platform_driver ar933x_uart_platform_driver = {
.probe = ar933x_uart_probe,
- .remove = __devexit_p(ar933x_uart_remove),
+ .remove = ar933x_uart_remove,
.driver = {
.name = DRIVER_NAME,
.owner = THIS_MODULE,
diff --git a/drivers/tty/serial/arc_uart.c b/drivers/tty/serial/arc_uart.c
new file mode 100644
index 0000000..3e0b3fa
--- /dev/null
+++ b/drivers/tty/serial/arc_uart.c
@@ -0,0 +1,746 @@
+/*
+ * ARC On-Chip(fpga) UART Driver
+ *
+ * Copyright (C) 2010-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * vineetg: July 10th 2012
+ * -Decoupled the driver from arch/arc
+ * +Using platform_get_resource() for irq/membase (thx to bfin_uart.c)
+ * +Using early_platform_xxx() for early console (thx to mach-shmobile/xxx)
+ *
+ * Vineetg: Aug 21st 2010
+ * -Is uart_tx_stopped() not done in tty write path as it has already been
+ * taken care of, in serial core
+ *
+ * Vineetg: Aug 18th 2010
+ * -New Serial Core based ARC UART driver
+ * -Derived largely from blackfin driver albiet with some major tweaks
+ *
+ * TODO:
+ * -check if sysreq works
+ */
+
+#if defined(CONFIG_SERIAL_ARC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
+#include <linux/module.h>
+#include <linux/serial.h>
+#include <linux/console.h>
+#include <linux/sysrq.h>
+#include <linux/platform_device.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/serial_core.h>
+#include <linux/io.h>
+
+/*************************************
+ * ARC UART Hardware Specs
+ ************************************/
+#define ARC_UART_TX_FIFO_SIZE 1
+
+/*
+ * UART Register set (this is not a Standards Compliant IP)
+ * Also each reg is Word aligned, but only 8 bits wide
+ */
+#define R_ID0 0
+#define R_ID1 4
+#define R_ID2 8
+#define R_ID3 12
+#define R_DATA 16
+#define R_STS 20
+#define R_BAUDL 24
+#define R_BAUDH 28
+
+/* Bits for UART Status Reg (R/W) */
+#define RXIENB 0x04 /* Receive Interrupt Enable */
+#define TXIENB 0x40 /* Transmit Interrupt Enable */
+
+#define RXEMPTY 0x20 /* Receive FIFO Empty: No char receivede */
+#define TXEMPTY 0x80 /* Transmit FIFO Empty, thus char can be written into */
+
+#define RXFULL 0x08 /* Receive FIFO full */
+#define RXFULL1 0x10 /* Receive FIFO has space for 1 char (tot space=4) */
+
+#define RXFERR 0x01 /* Frame Error: Stop Bit not detected */
+#define RXOERR 0x02 /* OverFlow Err: Char recv but RXFULL still set */
+
+/* Uart bit fiddling helpers: lowest level */
+#define RBASE(uart, reg) (uart->port.membase + reg)
+#define UART_REG_SET(u, r, v) writeb((v), RBASE(u, r))
+#define UART_REG_GET(u, r) readb(RBASE(u, r))
+
+#define UART_REG_OR(u, r, v) UART_REG_SET(u, r, UART_REG_GET(u, r) | (v))
+#define UART_REG_CLR(u, r, v) UART_REG_SET(u, r, UART_REG_GET(u, r) & ~(v))
+
+/* Uart bit fiddling helpers: API level */
+#define UART_SET_DATA(uart, val) UART_REG_SET(uart, R_DATA, val)
+#define UART_GET_DATA(uart) UART_REG_GET(uart, R_DATA)
+
+#define UART_SET_BAUDH(uart, val) UART_REG_SET(uart, R_BAUDH, val)
+#define UART_SET_BAUDL(uart, val) UART_REG_SET(uart, R_BAUDL, val)
+
+#define UART_CLR_STATUS(uart, val) UART_REG_CLR(uart, R_STS, val)
+#define UART_GET_STATUS(uart) UART_REG_GET(uart, R_STS)
+
+#define UART_ALL_IRQ_DISABLE(uart) UART_REG_CLR(uart, R_STS, RXIENB|TXIENB)
+#define UART_RX_IRQ_DISABLE(uart) UART_REG_CLR(uart, R_STS, RXIENB)
+#define UART_TX_IRQ_DISABLE(uart) UART_REG_CLR(uart, R_STS, TXIENB)
+
+#define UART_ALL_IRQ_ENABLE(uart) UART_REG_OR(uart, R_STS, RXIENB|TXIENB)
+#define UART_RX_IRQ_ENABLE(uart) UART_REG_OR(uart, R_STS, RXIENB)
+#define UART_TX_IRQ_ENABLE(uart) UART_REG_OR(uart, R_STS, TXIENB)
+
+#define ARC_SERIAL_DEV_NAME "ttyARC"
+
+struct arc_uart_port {
+ struct uart_port port;
+ unsigned long baud;
+ int is_emulated; /* H/w vs. Instruction Set Simulator */
+};
+
+#define to_arc_port(uport) container_of(uport, struct arc_uart_port, port)
+
+static struct arc_uart_port arc_uart_ports[CONFIG_SERIAL_ARC_NR_PORTS];
+
+#ifdef CONFIG_SERIAL_ARC_CONSOLE
+static struct console arc_console;
+#endif
+
+#define DRIVER_NAME "arc-uart"
+
+static struct uart_driver arc_uart_driver = {
+ .owner = THIS_MODULE,
+ .driver_name = DRIVER_NAME,
+ .dev_name = ARC_SERIAL_DEV_NAME,
+ .major = 0,
+ .minor = 0,
+ .nr = CONFIG_SERIAL_ARC_NR_PORTS,
+#ifdef CONFIG_SERIAL_ARC_CONSOLE
+ .cons = &arc_console,
+#endif
+};
+
+static void arc_serial_stop_rx(struct uart_port *port)
+{
+ struct arc_uart_port *uart = to_arc_port(port);
+
+ UART_RX_IRQ_DISABLE(uart);
+}
+
+static void arc_serial_stop_tx(struct uart_port *port)
+{
+ struct arc_uart_port *uart = to_arc_port(port);
+
+ while (!(UART_GET_STATUS(uart) & TXEMPTY))
+ cpu_relax();
+
+ UART_TX_IRQ_DISABLE(uart);
+}
+
+/*
+ * Return TIOCSER_TEMT when transmitter is not busy.
+ */
+static unsigned int arc_serial_tx_empty(struct uart_port *port)
+{
+ struct arc_uart_port *uart = to_arc_port(port);
+ unsigned int stat;
+
+ stat = UART_GET_STATUS(uart);
+ if (stat & TXEMPTY)
+ return TIOCSER_TEMT;
+
+ return 0;
+}
+
+/*
+ * Driver internal routine, used by both tty(serial core) as well as tx-isr
+ * -Called under spinlock in either cases
+ * -also tty->stopped / tty->hw_stopped has already been checked
+ * = by uart_start( ) before calling us
+ * = tx_ist checks that too before calling
+ */
+static void arc_serial_tx_chars(struct arc_uart_port *uart)
+{
+ struct circ_buf *xmit = &uart->port.state->xmit;
+ int sent = 0;
+ unsigned char ch;
+
+ if (unlikely(uart->port.x_char)) {
+ UART_SET_DATA(uart, uart->port.x_char);
+ uart->port.icount.tx++;
+ uart->port.x_char = 0;
+ sent = 1;
+ } else if (xmit->tail != xmit->head) { /* TODO: uart_circ_empty */
+ ch = xmit->buf[xmit->tail];
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ uart->port.icount.tx++;
+ while (!(UART_GET_STATUS(uart) & TXEMPTY))
+ cpu_relax();
+ UART_SET_DATA(uart, ch);
+ sent = 1;
+ }
+
+ /*
+ * If num chars in xmit buffer are too few, ask tty layer for more.
+ * By Hard ISR to schedule processing in software interrupt part
+ */
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(&uart->port);
+
+ if (sent)
+ UART_TX_IRQ_ENABLE(uart);
+}
+
+/*
+ * port is locked and interrupts are disabled
+ * uart_start( ) calls us under the port spinlock irqsave
+ */
+static void arc_serial_start_tx(struct uart_port *port)
+{
+ struct arc_uart_port *uart = to_arc_port(port);
+
+ arc_serial_tx_chars(uart);
+}
+
+static void arc_serial_rx_chars(struct arc_uart_port *uart)
+{
+ struct tty_struct *tty = tty_port_tty_get(&uart->port.state->port);
+ unsigned int status, ch, flg = 0;
+
+ if (!tty)
+ return;
+
+ /*
+ * UART has 4 deep RX-FIFO. Driver's recongnition of this fact
+ * is very subtle. Here's how ...
+ * Upon getting a RX-Intr, such that RX-EMPTY=0, meaning data available,
+ * driver reads the DATA Reg and keeps doing that in a loop, until
+ * RX-EMPTY=1. Multiple chars being avail, with a single Interrupt,
+ * before RX-EMPTY=0, implies some sort of buffering going on in the
+ * controller, which is indeed the Rx-FIFO.
+ */
+ while (!((status = UART_GET_STATUS(uart)) & RXEMPTY)) {
+
+ ch = UART_GET_DATA(uart);
+ uart->port.icount.rx++;
+
+ if (unlikely(status & (RXOERR | RXFERR))) {
+ if (status & RXOERR) {
+ uart->port.icount.overrun++;
+ flg = TTY_OVERRUN;
+ UART_CLR_STATUS(uart, RXOERR);
+ }
+
+ if (status & RXFERR) {
+ uart->port.icount.frame++;
+ flg = TTY_FRAME;
+ UART_CLR_STATUS(uart, RXFERR);
+ }
+ } else
+ flg = TTY_NORMAL;
+
+ if (unlikely(uart_handle_sysrq_char(&uart->port, ch)))
+ goto done;
+
+ uart_insert_char(&uart->port, status, RXOERR, ch, flg);
+
+done:
+ tty_flip_buffer_push(tty);
+ }
+
+ tty_kref_put(tty);
+}
+
+/*
+ * A note on the Interrupt handling state machine of this driver
+ *
+ * kernel printk writes funnel thru the console driver framework and in order
+ * to keep things simple as well as efficient, it writes to UART in polled
+ * mode, in one shot, and exits.
+ *
+ * OTOH, Userland output (via tty layer), uses interrupt based writes as there
+ * can be undeterministic delay between char writes.
+ *
+ * Thus Rx-interrupts are always enabled, while tx-interrupts are by default
+ * disabled.
+ *
+ * When tty has some data to send out, serial core calls driver's start_tx
+ * which
+ * -checks-if-tty-buffer-has-char-to-send
+ * -writes-data-to-uart
+ * -enable-tx-intr
+ *
+ * Once data bits are pushed out, controller raises the Tx-room-avail-Interrupt.
+ * The first thing Tx ISR does is disable further Tx interrupts (as this could
+ * be the last char to send, before settling down into the quiet polled mode).
+ * It then calls the exact routine used by tty layer write to send out any
+ * more char in tty buffer. In case of sending, it re-enables Tx-intr. In case
+ * of no data, it remains disabled.
+ * This is how the transmit state machine is dynamically switched on/off
+ */
+
+static irqreturn_t arc_serial_isr(int irq, void *dev_id)
+{
+ struct arc_uart_port *uart = dev_id;
+ unsigned int status;
+
+ status = UART_GET_STATUS(uart);
+
+ /*
+ * Single IRQ for both Rx (data available) Tx (room available) Interrupt
+ * notifications from the UART Controller.
+ * To demultiplex between the two, we check the relevant bits
+ */
+ if ((status & RXIENB) && !(status & RXEMPTY)) {
+
+ /* already in ISR, no need of xx_irqsave */
+ spin_lock(&uart->port.lock);
+ arc_serial_rx_chars(uart);
+ spin_unlock(&uart->port.lock);
+ }
+
+ if ((status & TXIENB) && (status & TXEMPTY)) {
+
+ /* Unconditionally disable further Tx-Interrupts.
+ * will be enabled by tx_chars() if needed.
+ */
+ UART_TX_IRQ_DISABLE(uart);
+
+ spin_lock(&uart->port.lock);
+
+ if (!uart_tx_stopped(&uart->port))
+ arc_serial_tx_chars(uart);
+
+ spin_unlock(&uart->port.lock);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static unsigned int arc_serial_get_mctrl(struct uart_port *port)
+{
+ /*
+ * Pretend we have a Modem status reg and following bits are
+ * always set, to satify the serial core state machine
+ * (DSR) Data Set Ready
+ * (CTS) Clear To Send
+ * (CAR) Carrier Detect
+ */
+ return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
+}
+
+static void arc_serial_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+ /* MCR not present */
+}
+
+/* Enable Modem Status Interrupts */
+
+static void arc_serial_enable_ms(struct uart_port *port)
+{
+ /* MSR not present */
+}
+
+static void arc_serial_break_ctl(struct uart_port *port, int break_state)
+{
+ /* ARC UART doesn't support sending Break signal */
+}
+
+static int arc_serial_startup(struct uart_port *port)
+{
+ struct arc_uart_port *uart = to_arc_port(port);
+
+ /* Before we hook up the ISR, Disable all UART Interrupts */
+ UART_ALL_IRQ_DISABLE(uart);
+
+ if (request_irq(uart->port.irq, arc_serial_isr, 0, "arc uart rx-tx",
+ uart)) {
+ dev_warn(uart->port.dev, "Unable to attach ARC UART intr\n");
+ return -EBUSY;
+ }
+
+ UART_RX_IRQ_ENABLE(uart); /* Only Rx IRQ enabled to begin with */
+
+ return 0;
+}
+
+/* This is not really needed */
+static void arc_serial_shutdown(struct uart_port *port)
+{
+ struct arc_uart_port *uart = to_arc_port(port);
+ free_irq(uart->port.irq, uart);
+}
+
+static void
+arc_serial_set_termios(struct uart_port *port, struct ktermios *new,
+ struct ktermios *old)
+{
+ struct arc_uart_port *uart = to_arc_port(port);
+ unsigned int baud, uartl, uarth, hw_val;
+ unsigned long flags;
+
+ /*
+ * Use the generic handler so that any specially encoded baud rates
+ * such as SPD_xx flags or "%B0" can be handled
+ * Max Baud I suppose will not be more than current 115K * 4
+ * Formula for ARC UART is: hw-val = ((CLK/(BAUD*4)) -1)
+ * spread over two 8-bit registers
+ */
+ baud = uart_get_baud_rate(port, new, old, 0, 460800);
+
+ hw_val = port->uartclk / (uart->baud * 4) - 1;
+ uartl = hw_val & 0xFF;
+ uarth = (hw_val >> 8) & 0xFF;
+
+ /*
+ * UART ISS(Instruction Set simulator) emulation has a subtle bug:
+ * A existing value of Baudh = 0 is used as a indication to startup
+ * it's internal state machine.
+ * Thus if baudh is set to 0, 2 times, it chokes.
+ * This happens with BAUD=115200 and the formaula above
+ * Until that is fixed, when running on ISS, we will set baudh to !0
+ */
+ if (uart->is_emulated)
+ uarth = 1;
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ UART_ALL_IRQ_DISABLE(uart);
+
+ UART_SET_BAUDL(uart, uartl);
+ UART_SET_BAUDH(uart, uarth);
+
+ UART_RX_IRQ_ENABLE(uart);
+
+ /*
+ * UART doesn't support Parity/Hardware Flow Control;
+ * Only supports 8N1 character size
+ */
+ new->c_cflag &= ~(CMSPAR|CRTSCTS|CSIZE);
+ new->c_cflag |= CS8;
+
+ if (old)
+ tty_termios_copy_hw(new, old);
+
+ /* Don't rewrite B0 */
+ if (tty_termios_baud_rate(new))
+ tty_termios_encode_baud_rate(new, baud, baud);
+
+ uart_update_timeout(port, new->c_cflag, baud);
+
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static const char *arc_serial_type(struct uart_port *port)
+{
+ struct arc_uart_port *uart = to_arc_port(port);
+
+ return uart->port.type == PORT_ARC ? DRIVER_NAME : NULL;
+}
+
+static void arc_serial_release_port(struct uart_port *port)
+{
+}
+
+static int arc_serial_request_port(struct uart_port *port)
+{
+ return 0;
+}
+
+/*
+ * Verify the new serial_struct (for TIOCSSERIAL).
+ */
+static int
+arc_serial_verify_port(struct uart_port *port, struct serial_struct *ser)
+{
+ if (port->type != PORT_UNKNOWN && ser->type != PORT_ARC)
+ return -EINVAL;
+
+ return 0;
+}
+
+/*
+ * Configure/autoconfigure the port.
+ */
+static void arc_serial_config_port(struct uart_port *port, int flags)
+{
+ struct arc_uart_port *uart = to_arc_port(port);
+
+ if (flags & UART_CONFIG_TYPE)
+ uart->port.type = PORT_ARC;
+}
+
+#if defined(CONFIG_CONSOLE_POLL) || defined(CONFIG_SERIAL_ARC_CONSOLE)
+
+static void arc_serial_poll_putchar(struct uart_port *port, unsigned char chr)
+{
+ struct arc_uart_port *uart = to_arc_port(port);
+
+ while (!(UART_GET_STATUS(uart) & TXEMPTY))
+ cpu_relax();
+
+ UART_SET_DATA(uart, chr);
+}
+#endif
+
+#ifdef CONFIG_CONSOLE_POLL
+static int arc_serial_poll_getchar(struct uart_port *port)
+{
+ struct arc_uart_port *uart = to_arc_port(port);
+ unsigned char chr;
+
+ while (!(UART_GET_STATUS(uart) & RXEMPTY))
+ cpu_relax();
+
+ chr = UART_GET_DATA(uart);
+ return chr;
+}
+#endif
+
+static struct uart_ops arc_serial_pops = {
+ .tx_empty = arc_serial_tx_empty,
+ .set_mctrl = arc_serial_set_mctrl,
+ .get_mctrl = arc_serial_get_mctrl,
+ .stop_tx = arc_serial_stop_tx,
+ .start_tx = arc_serial_start_tx,
+ .stop_rx = arc_serial_stop_rx,
+ .enable_ms = arc_serial_enable_ms,
+ .break_ctl = arc_serial_break_ctl,
+ .startup = arc_serial_startup,
+ .shutdown = arc_serial_shutdown,
+ .set_termios = arc_serial_set_termios,
+ .type = arc_serial_type,
+ .release_port = arc_serial_release_port,
+ .request_port = arc_serial_request_port,
+ .config_port = arc_serial_config_port,
+ .verify_port = arc_serial_verify_port,
+#ifdef CONFIG_CONSOLE_POLL
+ .poll_put_char = arc_serial_poll_putchar,
+ .poll_get_char = arc_serial_poll_getchar,
+#endif
+};
+
+static int
+arc_uart_init_one(struct platform_device *pdev, struct arc_uart_port *uart)
+{
+ struct resource *res, *res2;
+ unsigned long *plat_data;
+
+ if (pdev->id < 0 || pdev->id >= CONFIG_SERIAL_ARC_NR_PORTS) {
+ dev_err(&pdev->dev, "Wrong uart platform device id.\n");
+ return -ENOENT;
+ }
+
+ plat_data = ((unsigned long *)(pdev->dev.platform_data));
+ uart->baud = plat_data[0];
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -ENODEV;
+
+ res2 = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (!res2)
+ return -ENODEV;
+
+ uart->port.mapbase = res->start;
+ uart->port.membase = ioremap_nocache(res->start, resource_size(res));
+ if (!uart->port.membase)
+ /* No point of dev_err since UART itself is hosed here */
+ return -ENXIO;
+
+ uart->port.irq = res2->start;
+ uart->port.dev = &pdev->dev;
+ uart->port.iotype = UPIO_MEM;
+ uart->port.flags = UPF_BOOT_AUTOCONF;
+ uart->port.line = pdev->id;
+ uart->port.ops = &arc_serial_pops;
+
+ uart->port.uartclk = plat_data[1];
+ uart->port.fifosize = ARC_UART_TX_FIFO_SIZE;
+
+ /*
+ * uart_insert_char( ) uses it in decideding whether to ignore a
+ * char or not. Explicitly setting it here, removes the subtelty
+ */
+ uart->port.ignore_status_mask = 0;
+
+ /* Real Hardware vs. emulated to work around a bug */
+ uart->is_emulated = !!plat_data[2];
+
+ return 0;
+}
+
+#ifdef CONFIG_SERIAL_ARC_CONSOLE
+
+static int arc_serial_console_setup(struct console *co, char *options)
+{
+ struct uart_port *port;
+ int baud = 115200;
+ int bits = 8;
+ int parity = 'n';
+ int flow = 'n';
+
+ if (co->index < 0 || co->index >= CONFIG_SERIAL_ARC_NR_PORTS)
+ return -ENODEV;
+
+ /*
+ * The uart port backing the console (e.g. ttyARC1) might not have been
+ * init yet. If so, defer the console setup to after the port.
+ */
+ port = &arc_uart_ports[co->index].port;
+ if (!port->membase)
+ return -ENODEV;
+
+ if (options)
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+
+ /*
+ * Serial core will call port->ops->set_termios( )
+ * which will set the baud reg
+ */
+ return uart_set_options(port, co, baud, parity, bits, flow);
+}
+
+static void arc_serial_console_putchar(struct uart_port *port, int ch)
+{
+ arc_serial_poll_putchar(port, (unsigned char)ch);
+}
+
+/*
+ * Interrupts are disabled on entering
+ */
+static void arc_serial_console_write(struct console *co, const char *s,
+ unsigned int count)
+{
+ struct uart_port *port = &arc_uart_ports[co->index].port;
+ unsigned long flags;
+
+ spin_lock_irqsave(&port->lock, flags);
+ uart_console_write(port, s, count, arc_serial_console_putchar);
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static struct console arc_console = {
+ .name = ARC_SERIAL_DEV_NAME,
+ .write = arc_serial_console_write,
+ .device = uart_console_device,
+ .setup = arc_serial_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+ .data = &arc_uart_driver
+};
+
+static __init void early_serial_write(struct console *con, const char *s,
+ unsigned int n)
+{
+ struct uart_port *port = &arc_uart_ports[con->index].port;
+ unsigned int i;
+
+ for (i = 0; i < n; i++, s++) {
+ if (*s == '\n')
+ arc_serial_poll_putchar(port, '\r');
+ arc_serial_poll_putchar(port, *s);
+ }
+}
+
+static struct __initdata console arc_early_serial_console = {
+ .name = "early_ARCuart",
+ .write = early_serial_write,
+ .flags = CON_PRINTBUFFER | CON_BOOT,
+ .index = -1
+};
+
+static int arc_serial_probe_earlyprintk(struct platform_device *pdev)
+{
+ arc_early_serial_console.index = pdev->id;
+
+ arc_uart_init_one(pdev, &arc_uart_ports[pdev->id]);
+
+ arc_serial_console_setup(&arc_early_serial_console, NULL);
+
+ register_console(&arc_early_serial_console);
+ return 0;
+}
+#else
+static int arc_serial_probe_earlyprintk(struct platform_device *pdev)
+{
+ return -ENODEV;
+}
+#endif /* CONFIG_SERIAL_ARC_CONSOLE */
+
+static int arc_serial_probe(struct platform_device *pdev)
+{
+ struct arc_uart_port *uart;
+ int rc;
+
+ if (is_early_platform_device(pdev))
+ return arc_serial_probe_earlyprintk(pdev);
+
+ uart = &arc_uart_ports[pdev->id];
+ rc = arc_uart_init_one(pdev, uart);
+ if (rc)
+ return rc;
+
+ return uart_add_one_port(&arc_uart_driver, &uart->port);
+}
+
+static int arc_serial_remove(struct platform_device *pdev)
+{
+ /* This will never be called */
+ return 0;
+}
+
+static struct platform_driver arc_platform_driver = {
+ .probe = arc_serial_probe,
+ .remove = arc_serial_remove,
+ .driver = {
+ .name = DRIVER_NAME,
+ .owner = THIS_MODULE,
+ },
+};
+
+#ifdef CONFIG_SERIAL_ARC_CONSOLE
+/*
+ * Register an early platform driver of "earlyprintk" class.
+ * ARCH platform code installs the driver and probes the early devices
+ * The installation could rely on user specifying earlyprintk=xyx in cmd line
+ * or it could be done independently, for all "earlyprintk" class drivers.
+ * [see arch/arc/plat-arcfpga/platform.c]
+ */
+early_platform_init("earlyprintk", &arc_platform_driver);
+
+#endif /* CONFIG_SERIAL_ARC_CONSOLE */
+
+static int __init arc_serial_init(void)
+{
+ int ret;
+
+ ret = uart_register_driver(&arc_uart_driver);
+ if (ret)
+ return ret;
+
+ ret = platform_driver_register(&arc_platform_driver);
+ if (ret)
+ uart_unregister_driver(&arc_uart_driver);
+
+ return ret;
+}
+
+static void __exit arc_serial_exit(void)
+{
+ platform_driver_unregister(&arc_platform_driver);
+ uart_unregister_driver(&arc_uart_driver);
+}
+
+module_init(arc_serial_init);
+module_exit(arc_serial_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("plat-arcfpga/uart");
+MODULE_AUTHOR("Vineet Gupta");
+MODULE_DESCRIPTION("ARC(Synopsys) On-Chip(fpga) serial driver");
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index 65f891b..b95886c 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -1424,7 +1424,7 @@
#endif
};
-static void __devinit atmel_of_init_port(struct atmel_uart_port *atmel_port,
+static void atmel_of_init_port(struct atmel_uart_port *atmel_port,
struct device_node *np)
{
u32 rs485_delay[2];
@@ -1459,7 +1459,7 @@
/*
* Configure the port from the platform device resource info.
*/
-static void __devinit atmel_init_port(struct atmel_uart_port *atmel_port,
+static void atmel_init_port(struct atmel_uart_port *atmel_port,
struct platform_device *pdev)
{
struct uart_port *port = &atmel_port->uart;
@@ -1767,7 +1767,7 @@
#define atmel_serial_resume NULL
#endif
-static int __devinit atmel_serial_probe(struct platform_device *pdev)
+static int atmel_serial_probe(struct platform_device *pdev)
{
struct atmel_uart_port *port;
struct device_node *np = pdev->dev.of_node;
@@ -1859,7 +1859,7 @@
return ret;
}
-static int __devexit atmel_serial_remove(struct platform_device *pdev)
+static int atmel_serial_remove(struct platform_device *pdev)
{
struct uart_port *port = platform_get_drvdata(pdev);
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
@@ -1884,7 +1884,7 @@
static struct platform_driver atmel_serial_driver = {
.probe = atmel_serial_probe,
- .remove = __devexit_p(atmel_serial_remove),
+ .remove = atmel_serial_remove,
.suspend = atmel_serial_suspend,
.resume = atmel_serial_resume,
.driver = {
diff --git a/drivers/tty/serial/bcm63xx_uart.c b/drivers/tty/serial/bcm63xx_uart.c
index c0b68b9..c76a2260 100644
--- a/drivers/tty/serial/bcm63xx_uart.c
+++ b/drivers/tty/serial/bcm63xx_uart.c
@@ -801,7 +801,7 @@
/*
* platform driver probe/remove callback
*/
-static int __devinit bcm_uart_probe(struct platform_device *pdev)
+static int bcm_uart_probe(struct platform_device *pdev)
{
struct resource *res_mem, *res_irq;
struct uart_port *port;
@@ -848,7 +848,7 @@
return 0;
}
-static int __devexit bcm_uart_remove(struct platform_device *pdev)
+static int bcm_uart_remove(struct platform_device *pdev)
{
struct uart_port *port;
@@ -865,7 +865,7 @@
*/
static struct platform_driver bcm_uart_platform_driver = {
.probe = bcm_uart_probe,
- .remove = __devexit_p(bcm_uart_remove),
+ .remove = bcm_uart_remove,
.driver = {
.owner = THIS_MODULE,
.name = "bcm63xx_uart",
diff --git a/drivers/tty/serial/bfin_sport_uart.c b/drivers/tty/serial/bfin_sport_uart.c
index 7fbc3a0..f5d1173 100644
--- a/drivers/tty/serial/bfin_sport_uart.c
+++ b/drivers/tty/serial/bfin_sport_uart.c
@@ -740,7 +740,7 @@
};
#endif
-static int __devinit sport_uart_probe(struct platform_device *pdev)
+static int sport_uart_probe(struct platform_device *pdev)
{
struct resource *res;
struct sport_uart_port *sport;
@@ -850,7 +850,7 @@
return ret;
}
-static int __devexit sport_uart_remove(struct platform_device *pdev)
+static int sport_uart_remove(struct platform_device *pdev)
{
struct sport_uart_port *sport = platform_get_drvdata(pdev);
@@ -871,7 +871,7 @@
static struct platform_driver sport_uart_driver = {
.probe = sport_uart_probe,
- .remove = __devexit_p(sport_uart_remove),
+ .remove = sport_uart_remove,
.driver = {
.name = DRV_NAME,
#ifdef CONFIG_PM
diff --git a/drivers/tty/serial/bfin_uart.c b/drivers/tty/serial/bfin_uart.c
index 9242d56..e6a008f 100644
--- a/drivers/tty/serial/bfin_uart.c
+++ b/drivers/tty/serial/bfin_uart.c
@@ -477,9 +477,9 @@
void bfin_serial_rx_dma_timeout(struct bfin_serial_port *uart)
{
int x_pos, pos;
+ unsigned long flags;
- dma_disable_irq_nosync(uart->rx_dma_channel);
- spin_lock_bh(&uart->rx_lock);
+ spin_lock_irqsave(&uart->rx_lock, flags);
/* 2D DMA RX buffer ring is used. Because curr_y_count and
* curr_x_count can't be read as an atomic operation,
@@ -510,8 +510,7 @@
uart->rx_dma_buf.tail = uart->rx_dma_buf.head;
}
- spin_unlock_bh(&uart->rx_lock);
- dma_enable_irq(uart->rx_dma_channel);
+ spin_unlock_irqrestore(&uart->rx_lock, flags);
mod_timer(&(uart->rx_dma_timer), jiffies + DMA_RX_FLUSH_JIFFIES);
}
@@ -800,6 +799,7 @@
unsigned long flags;
unsigned int baud, quot;
unsigned int ier, lcr = 0;
+ unsigned long timeout;
switch (termios->c_cflag & CSIZE) {
case CS8:
@@ -869,6 +869,14 @@
UART_SET_ANOMALY_THRESHOLD(uart, USEC_PER_SEC / baud * 15);
+ /* Wait till the transfer buffer is empty */
+ timeout = jiffies + msecs_to_jiffies(10);
+ while (UART_GET_GCTL(uart) & UCEN && !(UART_GET_LSR(uart) & TEMT))
+ if (time_after(jiffies, timeout)) {
+ dev_warn(port->dev, "timeout waiting for TX buffer empty\n");
+ break;
+ }
+
/* Disable UART */
ier = UART_GET_IER(uart);
UART_PUT_GCTL(uart, UART_GET_GCTL(uart) & ~UCEN);
@@ -1390,7 +1398,7 @@
return ret;
}
-static int __devexit bfin_serial_remove(struct platform_device *pdev)
+static int bfin_serial_remove(struct platform_device *pdev)
{
struct bfin_serial_port *uart = platform_get_drvdata(pdev);
@@ -1410,7 +1418,7 @@
static struct platform_driver bfin_serial_driver = {
.probe = bfin_serial_probe,
- .remove = __devexit_p(bfin_serial_remove),
+ .remove = bfin_serial_remove,
.suspend = bfin_serial_suspend,
.resume = bfin_serial_resume,
.driver = {
diff --git a/drivers/tty/serial/clps711x.c b/drivers/tty/serial/clps711x.c
index d0f719f..3fd2526 100644
--- a/drivers/tty/serial/clps711x.c
+++ b/drivers/tty/serial/clps711x.c
@@ -10,15 +10,6 @@
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#if defined(CONFIG_SERIAL_CLPS711X_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
@@ -26,172 +17,169 @@
#endif
#include <linux/module.h>
-#include <linux/ioport.h>
-#include <linux/init.h>
-#include <linux/console.h>
-#include <linux/sysrq.h>
-#include <linux/spinlock.h>
#include <linux/device.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
+#include <linux/console.h>
#include <linux/serial_core.h>
#include <linux/serial.h>
#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
#include <mach/hardware.h>
-#include <asm/irq.h>
-#define UART_NR 2
+#define UART_CLPS711X_NAME "uart-clps711x"
+#define UART_CLPS711X_NR 2
+#define UART_CLPS711X_MAJOR 204
+#define UART_CLPS711X_MINOR 40
-#define SERIAL_CLPS711X_MAJOR 204
-#define SERIAL_CLPS711X_MINOR 40
-#define SERIAL_CLPS711X_NR UART_NR
+#define UBRLCR(port) ((port)->line ? UBRLCR2 : UBRLCR1)
+#define UARTDR(port) ((port)->line ? UARTDR2 : UARTDR1)
+#define SYSFLG(port) ((port)->line ? SYSFLG2 : SYSFLG1)
+#define SYSCON(port) ((port)->line ? SYSCON2 : SYSCON1)
+#define TX_IRQ(port) ((port)->line ? IRQ_UTXINT2 : IRQ_UTXINT1)
+#define RX_IRQ(port) ((port)->line ? IRQ_URXINT2 : IRQ_URXINT1)
-/*
- * We use the relevant SYSCON register as a base address for these ports.
- */
-#define UBRLCR(port) ((port)->iobase + UBRLCR1 - SYSCON1)
-#define UARTDR(port) ((port)->iobase + UARTDR1 - SYSCON1)
-#define SYSFLG(port) ((port)->iobase + SYSFLG1 - SYSCON1)
-#define SYSCON(port) ((port)->iobase + SYSCON1 - SYSCON1)
+struct clps711x_port {
+ struct uart_driver uart;
+ struct clk *uart_clk;
+ struct uart_port port[UART_CLPS711X_NR];
+ int tx_enabled[UART_CLPS711X_NR];
+#ifdef CONFIG_SERIAL_CLPS711X_CONSOLE
+ struct console console;
+#endif
+};
-#define TX_IRQ(port) ((port)->irq)
-#define RX_IRQ(port) ((port)->irq + 1)
-
-#define UART_ANY_ERR (UARTDR_FRMERR | UARTDR_PARERR | UARTDR_OVERR)
-
-#define tx_enabled(port) ((port)->unused[0])
-
-static void clps711xuart_stop_tx(struct uart_port *port)
+static void uart_clps711x_stop_tx(struct uart_port *port)
{
- if (tx_enabled(port)) {
+ struct clps711x_port *s = dev_get_drvdata(port->dev);
+
+ if (s->tx_enabled[port->line]) {
disable_irq(TX_IRQ(port));
- tx_enabled(port) = 0;
+ s->tx_enabled[port->line] = 0;
}
}
-static void clps711xuart_start_tx(struct uart_port *port)
+static void uart_clps711x_start_tx(struct uart_port *port)
{
- if (!tx_enabled(port)) {
+ struct clps711x_port *s = dev_get_drvdata(port->dev);
+
+ if (!s->tx_enabled[port->line]) {
enable_irq(TX_IRQ(port));
- tx_enabled(port) = 1;
+ s->tx_enabled[port->line] = 1;
}
}
-static void clps711xuart_stop_rx(struct uart_port *port)
+static void uart_clps711x_stop_rx(struct uart_port *port)
{
disable_irq(RX_IRQ(port));
}
-static void clps711xuart_enable_ms(struct uart_port *port)
+static void uart_clps711x_enable_ms(struct uart_port *port)
{
+ /* Do nothing */
}
-static irqreturn_t clps711xuart_int_rx(int irq, void *dev_id)
+static irqreturn_t uart_clps711x_int_rx(int irq, void *dev_id)
{
struct uart_port *port = dev_id;
- struct tty_struct *tty = port->state->port.tty;
+ struct tty_struct *tty = tty_port_tty_get(&port->state->port);
unsigned int status, ch, flg;
- status = clps_readl(SYSFLG(port));
- while (!(status & SYSFLG_URXFE)) {
- ch = clps_readl(UARTDR(port));
+ if (!tty)
+ return IRQ_HANDLED;
+
+ for (;;) {
+ status = clps_readl(SYSFLG(port));
+ if (status & SYSFLG_URXFE)
+ break;
+
+ ch = clps_readw(UARTDR(port));
+ status = ch & (UARTDR_FRMERR | UARTDR_PARERR | UARTDR_OVERR);
+ ch &= 0xff;
port->icount.rx++;
-
flg = TTY_NORMAL;
- /*
- * Note that the error handling code is
- * out of the main execution path
- */
- if (unlikely(ch & UART_ANY_ERR)) {
- if (ch & UARTDR_PARERR)
+ if (unlikely(status)) {
+ if (status & UARTDR_PARERR)
port->icount.parity++;
- else if (ch & UARTDR_FRMERR)
+ else if (status & UARTDR_FRMERR)
port->icount.frame++;
- if (ch & UARTDR_OVERR)
+ else if (status & UARTDR_OVERR)
port->icount.overrun++;
- ch &= port->read_status_mask;
+ status &= port->read_status_mask;
- if (ch & UARTDR_PARERR)
+ if (status & UARTDR_PARERR)
flg = TTY_PARITY;
- else if (ch & UARTDR_FRMERR)
+ else if (status & UARTDR_FRMERR)
flg = TTY_FRAME;
-
-#ifdef SUPPORT_SYSRQ
- port->sysrq = 0;
-#endif
+ else if (status & UARTDR_OVERR)
+ flg = TTY_OVERRUN;
}
if (uart_handle_sysrq_char(port, ch))
- goto ignore_char;
+ continue;
- /*
- * CHECK: does overrun affect the current character?
- * ASSUMPTION: it does not.
- */
- uart_insert_char(port, ch, UARTDR_OVERR, ch, flg);
+ if (status & port->ignore_status_mask)
+ continue;
- ignore_char:
- status = clps_readl(SYSFLG(port));
+ uart_insert_char(port, status, UARTDR_OVERR, ch, flg);
}
+
tty_flip_buffer_push(tty);
+
+ tty_kref_put(tty);
+
return IRQ_HANDLED;
}
-static irqreturn_t clps711xuart_int_tx(int irq, void *dev_id)
+static irqreturn_t uart_clps711x_int_tx(int irq, void *dev_id)
{
struct uart_port *port = dev_id;
+ struct clps711x_port *s = dev_get_drvdata(port->dev);
struct circ_buf *xmit = &port->state->xmit;
- int count;
if (port->x_char) {
- clps_writel(port->x_char, UARTDR(port));
+ clps_writew(port->x_char, UARTDR(port));
port->icount.tx++;
port->x_char = 0;
return IRQ_HANDLED;
}
- if (uart_circ_empty(xmit) || uart_tx_stopped(port))
- goto disable_tx_irq;
+ if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
+ disable_irq_nosync(TX_IRQ(port));
+ s->tx_enabled[port->line] = 0;
+ return IRQ_HANDLED;
+ }
- count = port->fifosize >> 1;
- do {
- clps_writel(xmit->buf[xmit->tail], UARTDR(port));
+ while (!uart_circ_empty(xmit)) {
+ clps_writew(xmit->buf[xmit->tail], UARTDR(port));
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
port->icount.tx++;
- if (uart_circ_empty(xmit))
+ if (clps_readl(SYSFLG(port) & SYSFLG_UTXFF))
break;
- } while (--count > 0);
+ }
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
uart_write_wakeup(port);
- if (uart_circ_empty(xmit)) {
- disable_tx_irq:
- disable_irq_nosync(TX_IRQ(port));
- tx_enabled(port) = 0;
- }
-
return IRQ_HANDLED;
}
-static unsigned int clps711xuart_tx_empty(struct uart_port *port)
+static unsigned int uart_clps711x_tx_empty(struct uart_port *port)
{
- unsigned int status = clps_readl(SYSFLG(port));
- return status & SYSFLG_UBUSY ? 0 : TIOCSER_TEMT;
+ return (clps_readl(SYSFLG(port) & SYSFLG_UBUSY)) ? 0 : TIOCSER_TEMT;
}
-static unsigned int clps711xuart_get_mctrl(struct uart_port *port)
+static unsigned int uart_clps711x_get_mctrl(struct uart_port *port)
{
- unsigned int port_addr;
- unsigned int result = 0;
- unsigned int status;
+ unsigned int status, result = 0;
- port_addr = SYSFLG(port);
- if (port_addr == SYSFLG1) {
+ if (port->line == 0) {
status = clps_readl(SYSFLG1);
if (status & SYSFLG1_DCD)
result |= TIOCM_CAR;
@@ -199,104 +187,86 @@
result |= TIOCM_DSR;
if (status & SYSFLG1_CTS)
result |= TIOCM_CTS;
- }
+ } else
+ result = TIOCM_DSR | TIOCM_CTS | TIOCM_CAR;
return result;
}
-static void
-clps711xuart_set_mctrl_null(struct uart_port *port, unsigned int mctrl)
+static void uart_clps711x_set_mctrl(struct uart_port *port, unsigned int mctrl)
{
+ /* Do nothing */
}
-static void clps711xuart_break_ctl(struct uart_port *port, int break_state)
+static void uart_clps711x_break_ctl(struct uart_port *port, int break_state)
{
unsigned long flags;
unsigned int ubrlcr;
spin_lock_irqsave(&port->lock, flags);
+
ubrlcr = clps_readl(UBRLCR(port));
- if (break_state == -1)
+ if (break_state)
ubrlcr |= UBRLCR_BREAK;
else
ubrlcr &= ~UBRLCR_BREAK;
clps_writel(ubrlcr, UBRLCR(port));
+
spin_unlock_irqrestore(&port->lock, flags);
}
-static int clps711xuart_startup(struct uart_port *port)
+static int uart_clps711x_startup(struct uart_port *port)
{
- unsigned int syscon;
- int retval;
+ struct clps711x_port *s = dev_get_drvdata(port->dev);
+ int ret;
- tx_enabled(port) = 1;
+ s->tx_enabled[port->line] = 1;
+ /* Allocate the IRQs */
+ ret = devm_request_irq(port->dev, TX_IRQ(port), uart_clps711x_int_tx,
+ 0, UART_CLPS711X_NAME " TX", port);
+ if (ret)
+ return ret;
- /*
- * Allocate the IRQs
- */
- retval = request_irq(TX_IRQ(port), clps711xuart_int_tx, 0,
- "clps711xuart_tx", port);
- if (retval)
- return retval;
-
- retval = request_irq(RX_IRQ(port), clps711xuart_int_rx, 0,
- "clps711xuart_rx", port);
- if (retval) {
- free_irq(TX_IRQ(port), port);
- return retval;
+ ret = devm_request_irq(port->dev, RX_IRQ(port), uart_clps711x_int_rx,
+ 0, UART_CLPS711X_NAME " RX", port);
+ if (ret) {
+ devm_free_irq(port->dev, TX_IRQ(port), port);
+ return ret;
}
- /*
- * enable the port
- */
- syscon = clps_readl(SYSCON(port));
- syscon |= SYSCON_UARTEN;
- clps_writel(syscon, SYSCON(port));
+ /* Disable break */
+ clps_writel(clps_readl(UBRLCR(port)) & ~UBRLCR_BREAK, UBRLCR(port));
+
+ /* Enable the port */
+ clps_writel(clps_readl(SYSCON(port)) | SYSCON_UARTEN, SYSCON(port));
return 0;
}
-static void clps711xuart_shutdown(struct uart_port *port)
+static void uart_clps711x_shutdown(struct uart_port *port)
{
- unsigned int ubrlcr, syscon;
+ /* Free the interrupts */
+ devm_free_irq(port->dev, TX_IRQ(port), port);
+ devm_free_irq(port->dev, RX_IRQ(port), port);
- /*
- * Free the interrupt
- */
- free_irq(TX_IRQ(port), port); /* TX interrupt */
- free_irq(RX_IRQ(port), port); /* RX interrupt */
-
- /*
- * disable the port
- */
- syscon = clps_readl(SYSCON(port));
- syscon &= ~SYSCON_UARTEN;
- clps_writel(syscon, SYSCON(port));
-
- /*
- * disable break condition and fifos
- */
- ubrlcr = clps_readl(UBRLCR(port));
- ubrlcr &= ~(UBRLCR_FIFOEN | UBRLCR_BREAK);
- clps_writel(ubrlcr, UBRLCR(port));
+ /* Disable the port */
+ clps_writel(clps_readl(SYSCON(port)) & ~SYSCON_UARTEN, SYSCON(port));
}
-static void
-clps711xuart_set_termios(struct uart_port *port, struct ktermios *termios,
- struct ktermios *old)
+static void uart_clps711x_set_termios(struct uart_port *port,
+ struct ktermios *termios,
+ struct ktermios *old)
{
unsigned int ubrlcr, baud, quot;
unsigned long flags;
- /*
- * We don't implement CREAD.
- */
- termios->c_cflag |= CREAD;
+ /* Mask termios capabilities we don't support */
+ termios->c_cflag &= ~CMSPAR;
+ termios->c_iflag &= ~(BRKINT | IGNBRK);
- /*
- * Ask the core to calculate the divisor for us.
- */
- baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
+ /* Ask the core to calculate the divisor for us */
+ baud = uart_get_baud_rate(port, termios, old, port->uartclk / 4096,
+ port->uartclk / 16);
quot = uart_get_divisor(port, baud);
switch (termios->c_cflag & CSIZE) {
@@ -309,160 +279,117 @@
case CS7:
ubrlcr = UBRLCR_WRDLEN7;
break;
- default: // CS8
+ case CS8:
+ default:
ubrlcr = UBRLCR_WRDLEN8;
break;
}
+
if (termios->c_cflag & CSTOPB)
ubrlcr |= UBRLCR_XSTOP;
+
if (termios->c_cflag & PARENB) {
ubrlcr |= UBRLCR_PRTEN;
if (!(termios->c_cflag & PARODD))
ubrlcr |= UBRLCR_EVENPRT;
}
- if (port->fifosize > 1)
- ubrlcr |= UBRLCR_FIFOEN;
+
+ /* Enable FIFO */
+ ubrlcr |= UBRLCR_FIFOEN;
spin_lock_irqsave(&port->lock, flags);
- /*
- * Update the per-port timeout.
- */
- uart_update_timeout(port, termios->c_cflag, baud);
-
+ /* Set read status mask */
port->read_status_mask = UARTDR_OVERR;
if (termios->c_iflag & INPCK)
port->read_status_mask |= UARTDR_PARERR | UARTDR_FRMERR;
- /*
- * Characters to ignore
- */
+ /* Set status ignore mask */
port->ignore_status_mask = 0;
- if (termios->c_iflag & IGNPAR)
- port->ignore_status_mask |= UARTDR_FRMERR | UARTDR_PARERR;
- if (termios->c_iflag & IGNBRK) {
- /*
- * If we're ignoring parity and break indicators,
- * ignore overruns to (for real raw support).
- */
- if (termios->c_iflag & IGNPAR)
- port->ignore_status_mask |= UARTDR_OVERR;
- }
+ if (!(termios->c_cflag & CREAD))
+ port->ignore_status_mask |= UARTDR_OVERR | UARTDR_PARERR |
+ UARTDR_FRMERR;
- quot -= 1;
+ uart_update_timeout(port, termios->c_cflag, baud);
- clps_writel(ubrlcr | quot, UBRLCR(port));
+ clps_writel(ubrlcr | (quot - 1), UBRLCR(port));
spin_unlock_irqrestore(&port->lock, flags);
}
-static const char *clps711xuart_type(struct uart_port *port)
+static const char *uart_clps711x_type(struct uart_port *port)
{
- return port->type == PORT_CLPS711X ? "CLPS711x" : NULL;
+ return (port->type == PORT_CLPS711X) ? "CLPS711X" : NULL;
}
-/*
- * Configure/autoconfigure the port.
- */
-static void clps711xuart_config_port(struct uart_port *port, int flags)
+static void uart_clps711x_config_port(struct uart_port *port, int flags)
{
if (flags & UART_CONFIG_TYPE)
port->type = PORT_CLPS711X;
}
-static void clps711xuart_release_port(struct uart_port *port)
+static void uart_clps711x_release_port(struct uart_port *port)
{
+ /* Do nothing */
}
-static int clps711xuart_request_port(struct uart_port *port)
+static int uart_clps711x_request_port(struct uart_port *port)
{
+ /* Do nothing */
return 0;
}
-static struct uart_ops clps711x_pops = {
- .tx_empty = clps711xuart_tx_empty,
- .set_mctrl = clps711xuart_set_mctrl_null,
- .get_mctrl = clps711xuart_get_mctrl,
- .stop_tx = clps711xuart_stop_tx,
- .start_tx = clps711xuart_start_tx,
- .stop_rx = clps711xuart_stop_rx,
- .enable_ms = clps711xuart_enable_ms,
- .break_ctl = clps711xuart_break_ctl,
- .startup = clps711xuart_startup,
- .shutdown = clps711xuart_shutdown,
- .set_termios = clps711xuart_set_termios,
- .type = clps711xuart_type,
- .config_port = clps711xuart_config_port,
- .release_port = clps711xuart_release_port,
- .request_port = clps711xuart_request_port,
-};
-
-static struct uart_port clps711x_ports[UART_NR] = {
- {
- .iobase = SYSCON1,
- .irq = IRQ_UTXINT1, /* IRQ_URXINT1, IRQ_UMSINT */
- .uartclk = 3686400,
- .fifosize = 16,
- .ops = &clps711x_pops,
- .line = 0,
- .flags = UPF_BOOT_AUTOCONF,
- },
- {
- .iobase = SYSCON2,
- .irq = IRQ_UTXINT2, /* IRQ_URXINT2 */
- .uartclk = 3686400,
- .fifosize = 16,
- .ops = &clps711x_pops,
- .line = 1,
- .flags = UPF_BOOT_AUTOCONF,
- }
+static const struct uart_ops uart_clps711x_ops = {
+ .tx_empty = uart_clps711x_tx_empty,
+ .set_mctrl = uart_clps711x_set_mctrl,
+ .get_mctrl = uart_clps711x_get_mctrl,
+ .stop_tx = uart_clps711x_stop_tx,
+ .start_tx = uart_clps711x_start_tx,
+ .stop_rx = uart_clps711x_stop_rx,
+ .enable_ms = uart_clps711x_enable_ms,
+ .break_ctl = uart_clps711x_break_ctl,
+ .startup = uart_clps711x_startup,
+ .shutdown = uart_clps711x_shutdown,
+ .set_termios = uart_clps711x_set_termios,
+ .type = uart_clps711x_type,
+ .config_port = uart_clps711x_config_port,
+ .release_port = uart_clps711x_release_port,
+ .request_port = uart_clps711x_request_port,
};
#ifdef CONFIG_SERIAL_CLPS711X_CONSOLE
-static void clps711xuart_console_putchar(struct uart_port *port, int ch)
+static void uart_clps711x_console_putchar(struct uart_port *port, int ch)
{
while (clps_readl(SYSFLG(port)) & SYSFLG_UTXFF)
barrier();
- clps_writel(ch, UARTDR(port));
+
+ clps_writew(ch, UARTDR(port));
}
-/*
- * Print a string to the serial port trying not to disturb
- * any possible real use of the port...
- *
- * The console_lock must be held when we get here.
- *
- * Note that this is called with interrupts already disabled
- */
-static void
-clps711xuart_console_write(struct console *co, const char *s,
- unsigned int count)
+static void uart_clps711x_console_write(struct console *co, const char *c,
+ unsigned n)
{
- struct uart_port *port = clps711x_ports + co->index;
- unsigned int status, syscon;
+ struct clps711x_port *s = (struct clps711x_port *)co->data;
+ struct uart_port *port = &s->port[co->index];
+ u32 syscon;
- /*
- * Ensure that the port is enabled.
- */
+ /* Ensure that the port is enabled */
syscon = clps_readl(SYSCON(port));
clps_writel(syscon | SYSCON_UARTEN, SYSCON(port));
- uart_console_write(port, s, count, clps711xuart_console_putchar);
+ uart_console_write(port, c, n, uart_clps711x_console_putchar);
- /*
- * Finally, wait for transmitter to become empty
- * and restore the uart state.
- */
- do {
- status = clps_readl(SYSFLG(port));
- } while (status & SYSFLG_UBUSY);
+ /* Wait for transmitter to become empty */
+ while (clps_readl(SYSFLG(port)) & SYSFLG_UBUSY)
+ barrier();
+ /* Restore the uart state */
clps_writel(syscon, SYSCON(port));
}
-static void __init
-clps711xuart_console_get_options(struct uart_port *port, int *baud,
- int *parity, int *bits)
+static void uart_clps711x_console_get_options(struct uart_port *port,
+ int *baud, int *parity,
+ int *bits)
{
if (clps_readl(SYSCON(port)) & SYSCON_UARTEN) {
unsigned int ubrlcr, quot;
@@ -487,92 +414,124 @@
}
}
-static int __init clps711xuart_console_setup(struct console *co, char *options)
+static int uart_clps711x_console_setup(struct console *co, char *options)
{
- struct uart_port *port;
- int baud = 38400;
- int bits = 8;
- int parity = 'n';
- int flow = 'n';
-
- /*
- * Check whether an invalid uart number has been specified, and
- * if so, search for the first available port that does have
- * console support.
- */
- port = uart_get_console(clps711x_ports, UART_NR, co);
+ int baud = 38400, bits = 8, parity = 'n', flow = 'n';
+ struct clps711x_port *s = (struct clps711x_port *)co->data;
+ struct uart_port *port = &s->port[(co->index > 0) ? co->index : 0];
if (options)
uart_parse_options(options, &baud, &parity, &bits, &flow);
else
- clps711xuart_console_get_options(port, &baud, &parity, &bits);
+ uart_clps711x_console_get_options(port, &baud, &parity, &bits);
return uart_set_options(port, co, baud, parity, bits, flow);
}
-
-static struct uart_driver clps711x_reg;
-static struct console clps711x_console = {
- .name = "ttyCL",
- .write = clps711xuart_console_write,
- .device = uart_console_device,
- .setup = clps711xuart_console_setup,
- .flags = CON_PRINTBUFFER,
- .index = -1,
- .data = &clps711x_reg,
-};
-
-static int __init clps711xuart_console_init(void)
-{
- register_console(&clps711x_console);
- return 0;
-}
-console_initcall(clps711xuart_console_init);
-
-#define CLPS711X_CONSOLE &clps711x_console
-#else
-#define CLPS711X_CONSOLE NULL
#endif
-static struct uart_driver clps711x_reg = {
- .driver_name = "ttyCL",
- .dev_name = "ttyCL",
- .major = SERIAL_CLPS711X_MAJOR,
- .minor = SERIAL_CLPS711X_MINOR,
- .nr = UART_NR,
-
- .cons = CLPS711X_CONSOLE,
-};
-
-static int __init clps711xuart_init(void)
+static int uart_clps711x_probe(struct platform_device *pdev)
{
+ struct clps711x_port *s;
int ret, i;
- printk(KERN_INFO "Serial: CLPS711x driver\n");
+ s = devm_kzalloc(&pdev->dev, sizeof(struct clps711x_port), GFP_KERNEL);
+ if (!s) {
+ dev_err(&pdev->dev, "Error allocating port structure\n");
+ return -ENOMEM;
+ }
+ platform_set_drvdata(pdev, s);
- ret = uart_register_driver(&clps711x_reg);
- if (ret)
- return ret;
+ s->uart_clk = devm_clk_get(&pdev->dev, "uart");
+ if (IS_ERR(s->uart_clk)) {
+ dev_err(&pdev->dev, "Can't get UART clocks\n");
+ ret = PTR_ERR(s->uart_clk);
+ goto err_out;
+ }
- for (i = 0; i < UART_NR; i++)
- uart_add_one_port(&clps711x_reg, &clps711x_ports[i]);
+ s->uart.owner = THIS_MODULE;
+ s->uart.dev_name = "ttyCL";
+ s->uart.major = UART_CLPS711X_MAJOR;
+ s->uart.minor = UART_CLPS711X_MINOR;
+ s->uart.nr = UART_CLPS711X_NR;
+#ifdef CONFIG_SERIAL_CLPS711X_CONSOLE
+ s->uart.cons = &s->console;
+ s->uart.cons->device = uart_console_device;
+ s->uart.cons->write = uart_clps711x_console_write;
+ s->uart.cons->setup = uart_clps711x_console_setup;
+ s->uart.cons->flags = CON_PRINTBUFFER;
+ s->uart.cons->index = -1;
+ s->uart.cons->data = s;
+ strcpy(s->uart.cons->name, "ttyCL");
+#endif
+ ret = uart_register_driver(&s->uart);
+ if (ret) {
+ dev_err(&pdev->dev, "Registering UART driver failed\n");
+ devm_clk_put(&pdev->dev, s->uart_clk);
+ goto err_out;
+ }
+
+ for (i = 0; i < UART_CLPS711X_NR; i++) {
+ s->port[i].line = i;
+ s->port[i].dev = &pdev->dev;
+ s->port[i].irq = TX_IRQ(&s->port[i]);
+ s->port[i].iobase = SYSCON(&s->port[i]);
+ s->port[i].type = PORT_CLPS711X;
+ s->port[i].fifosize = 16;
+ s->port[i].flags = UPF_SKIP_TEST | UPF_FIXED_TYPE;
+ s->port[i].uartclk = clk_get_rate(s->uart_clk);
+ s->port[i].ops = &uart_clps711x_ops;
+ WARN_ON(uart_add_one_port(&s->uart, &s->port[i]));
+ }
+
+ return 0;
+
+err_out:
+ platform_set_drvdata(pdev, NULL);
+
+ return ret;
+}
+
+static int uart_clps711x_remove(struct platform_device *pdev)
+{
+ struct clps711x_port *s = platform_get_drvdata(pdev);
+ int i;
+
+ for (i = 0; i < UART_CLPS711X_NR; i++)
+ uart_remove_one_port(&s->uart, &s->port[i]);
+
+ devm_clk_put(&pdev->dev, s->uart_clk);
+ uart_unregister_driver(&s->uart);
+ platform_set_drvdata(pdev, NULL);
return 0;
}
-static void __exit clps711xuart_exit(void)
+static struct platform_driver clps711x_uart_driver = {
+ .driver = {
+ .name = UART_CLPS711X_NAME,
+ .owner = THIS_MODULE,
+ },
+ .probe = uart_clps711x_probe,
+ .remove = uart_clps711x_remove,
+};
+module_platform_driver(clps711x_uart_driver);
+
+static struct platform_device clps711x_uart_device = {
+ .name = UART_CLPS711X_NAME,
+};
+
+static int __init uart_clps711x_init(void)
{
- int i;
-
- for (i = 0; i < UART_NR; i++)
- uart_remove_one_port(&clps711x_reg, &clps711x_ports[i]);
-
- uart_unregister_driver(&clps711x_reg);
+ return platform_device_register(&clps711x_uart_device);
}
+module_init(uart_clps711x_init);
-module_init(clps711xuart_init);
-module_exit(clps711xuart_exit);
+static void __exit uart_clps711x_exit(void)
+{
+ platform_device_unregister(&clps711x_uart_device);
+}
+module_exit(uart_clps711x_exit);
MODULE_AUTHOR("Deep Blue Solutions Ltd");
-MODULE_DESCRIPTION("CLPS-711x generic serial driver");
+MODULE_DESCRIPTION("CLPS711X serial driver");
MODULE_LICENSE("GPL");
-MODULE_ALIAS_CHARDEV(SERIAL_CLPS711X_MAJOR, SERIAL_CLPS711X_MINOR);
diff --git a/drivers/tty/serial/cpm_uart/cpm_uart_core.c b/drivers/tty/serial/cpm_uart/cpm_uart_core.c
index d0dd919..ad0caf1 100644
--- a/drivers/tty/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/tty/serial/cpm_uart/cpm_uart_core.c
@@ -1373,7 +1373,7 @@
static int probe_index;
-static int __devinit cpm_uart_probe(struct platform_device *ofdev)
+static int cpm_uart_probe(struct platform_device *ofdev)
{
int index = probe_index++;
struct uart_cpm_port *pinfo = &cpm_uart_ports[index];
@@ -1396,7 +1396,7 @@
return uart_add_one_port(&cpm_reg, &pinfo->port);
}
-static int __devexit cpm_uart_remove(struct platform_device *ofdev)
+static int cpm_uart_remove(struct platform_device *ofdev)
{
struct uart_cpm_port *pinfo = dev_get_drvdata(&ofdev->dev);
return uart_remove_one_port(&cpm_reg, &pinfo->port);
diff --git a/drivers/tty/serial/efm32-uart.c b/drivers/tty/serial/efm32-uart.c
index 615e464..a8cbb26 100644
--- a/drivers/tty/serial/efm32-uart.c
+++ b/drivers/tty/serial/efm32-uart.c
@@ -690,7 +690,7 @@
}
-static int __devinit efm32_uart_probe(struct platform_device *pdev)
+static int efm32_uart_probe(struct platform_device *pdev)
{
struct efm32_uart_port *efm_port;
struct resource *res;
@@ -764,7 +764,7 @@
return ret;
}
-static int __devexit efm32_uart_remove(struct platform_device *pdev)
+static int efm32_uart_remove(struct platform_device *pdev)
{
struct efm32_uart_port *efm_port = platform_get_drvdata(pdev);
@@ -791,7 +791,7 @@
static struct platform_driver efm32_uart_driver = {
.probe = efm32_uart_probe,
- .remove = __devexit_p(efm32_uart_remove),
+ .remove = efm32_uart_remove,
.driver = {
.name = DRIVER_NAME,
diff --git a/drivers/tty/serial/icom.c b/drivers/tty/serial/icom.c
index defc4e3..6197a69 100644
--- a/drivers/tty/serial/icom.c
+++ b/drivers/tty/serial/icom.c
@@ -175,7 +175,7 @@
}
}
-static int __devinit get_port_memory(struct icom_port *icom_port)
+static int get_port_memory(struct icom_port *icom_port)
{
int index;
unsigned long stgAddr;
@@ -1314,7 +1314,7 @@
.cons = ICOM_CONSOLE,
};
-static int __devinit icom_init_ports(struct icom_adapter *icom_adapter)
+static int icom_init_ports(struct icom_adapter *icom_adapter)
{
u32 subsystem_id = icom_adapter->subsystem_id;
int i;
@@ -1381,7 +1381,7 @@
0x8024 + 2 - 2 * (icom_port->port - 2);
}
}
-static int __devinit icom_load_ports(struct icom_adapter *icom_adapter)
+static int icom_load_ports(struct icom_adapter *icom_adapter)
{
struct icom_port *icom_port;
int port_num;
@@ -1407,7 +1407,7 @@
return 0;
}
-static int __devinit icom_alloc_adapter(struct icom_adapter
+static int icom_alloc_adapter(struct icom_adapter
**icom_adapter_ref)
{
int adapter_count = 0;
@@ -1487,7 +1487,7 @@
icom_remove_adapter(icom_adapter);
}
-static int __devinit icom_probe(struct pci_dev *dev,
+static int icom_probe(struct pci_dev *dev,
const struct pci_device_id *ent)
{
int index;
@@ -1596,7 +1596,7 @@
return retval;
}
-static void __devexit icom_remove(struct pci_dev *dev)
+static void icom_remove(struct pci_dev *dev)
{
struct icom_adapter *icom_adapter;
struct list_head *tmp;
@@ -1617,7 +1617,7 @@
.name = ICOM_DRIVER_NAME,
.id_table = icom_pci_table,
.probe = icom_probe,
- .remove = __devexit_p(icom_remove),
+ .remove = icom_remove,
};
static int __init icom_init(void)
diff --git a/drivers/tty/serial/ifx6x60.c b/drivers/tty/serial/ifx6x60.c
index 5b9bc19..675d94a 100644
--- a/drivers/tty/serial/ifx6x60.c
+++ b/drivers/tty/serial/ifx6x60.c
@@ -60,20 +60,27 @@
#include <linux/pm_runtime.h>
#include <linux/spi/ifx_modem.h>
#include <linux/delay.h>
+#include <linux/reboot.h>
#include "ifx6x60.h"
#define IFX_SPI_MORE_MASK 0x10
-#define IFX_SPI_MORE_BIT 12 /* bit position in u16 */
-#define IFX_SPI_CTS_BIT 13 /* bit position in u16 */
+#define IFX_SPI_MORE_BIT 4 /* bit position in u8 */
+#define IFX_SPI_CTS_BIT 6 /* bit position in u8 */
#define IFX_SPI_MODE SPI_MODE_1
#define IFX_SPI_TTY_ID 0
#define IFX_SPI_TIMEOUT_SEC 2
#define IFX_SPI_HEADER_0 (-1)
#define IFX_SPI_HEADER_F (-2)
+#define PO_POST_DELAY 200
+#define IFX_MDM_RST_PMU 4
+
/* forward reference */
static void ifx_spi_handle_srdy(struct ifx_spi_device *ifx_dev);
+static int ifx_modem_reboot_callback(struct notifier_block *nfb,
+ unsigned long event, void *data);
+static int ifx_modem_power_off(struct ifx_spi_device *ifx_dev);
/* local variables */
static int spi_bpw = 16; /* 8, 16 or 32 bit word length */
@@ -81,6 +88,29 @@
static struct ifx_spi_device *saved_ifx_dev;
static struct lock_class_key ifx_spi_key;
+static struct notifier_block ifx_modem_reboot_notifier_block = {
+ .notifier_call = ifx_modem_reboot_callback,
+};
+
+static int ifx_modem_power_off(struct ifx_spi_device *ifx_dev)
+{
+ gpio_set_value(IFX_MDM_RST_PMU, 1);
+ msleep(PO_POST_DELAY);
+
+ return 0;
+}
+
+static int ifx_modem_reboot_callback(struct notifier_block *nfb,
+ unsigned long event, void *data)
+{
+ if (saved_ifx_dev)
+ ifx_modem_power_off(saved_ifx_dev);
+ else
+ pr_warn("no ifx modem active;\n");
+
+ return NOTIFY_OK;
+}
+
/* GPIO/GPE settings */
/**
@@ -152,26 +182,67 @@
}
/**
- * swap_buf
+ * swap_buf_8
* @buf: our buffer
* @len : number of bytes (not words) in the buffer
* @end: end of buffer
*
* Swap the contents of a buffer into big endian format
*/
-static inline void swap_buf(u16 *buf, int len, void *end)
+static inline void swap_buf_8(unsigned char *buf, int len, void *end)
+{
+ /* don't swap buffer if SPI word width is 8 bits */
+ return;
+}
+
+/**
+ * swap_buf_16
+ * @buf: our buffer
+ * @len : number of bytes (not words) in the buffer
+ * @end: end of buffer
+ *
+ * Swap the contents of a buffer into big endian format
+ */
+static inline void swap_buf_16(unsigned char *buf, int len, void *end)
{
int n;
+ u16 *buf_16 = (u16 *)buf;
len = ((len + 1) >> 1);
- if ((void *)&buf[len] > end) {
- pr_err("swap_buf: swap exceeds boundary (%p > %p)!",
- &buf[len], end);
+ if ((void *)&buf_16[len] > end) {
+ pr_err("swap_buf_16: swap exceeds boundary (%p > %p)!",
+ &buf_16[len], end);
return;
}
for (n = 0; n < len; n++) {
- *buf = cpu_to_be16(*buf);
- buf++;
+ *buf_16 = cpu_to_be16(*buf_16);
+ buf_16++;
+ }
+}
+
+/**
+ * swap_buf_32
+ * @buf: our buffer
+ * @len : number of bytes (not words) in the buffer
+ * @end: end of buffer
+ *
+ * Swap the contents of a buffer into big endian format
+ */
+static inline void swap_buf_32(unsigned char *buf, int len, void *end)
+{
+ int n;
+
+ u32 *buf_32 = (u32 *)buf;
+ len = (len + 3) >> 2;
+
+ if ((void *)&buf_32[len] > end) {
+ pr_err("swap_buf_32: swap exceeds boundary (%p > %p)!\n",
+ &buf_32[len], end);
+ return;
+ }
+ for (n = 0; n < len; n++) {
+ *buf_32 = cpu_to_be32(*buf_32);
+ buf_32++;
}
}
@@ -190,9 +261,7 @@
if (!val) {
if (!test_and_set_bit(IFX_SPI_STATE_TIMER_PENDING,
&ifx_dev->flags)) {
- ifx_dev->spi_timer.expires =
- jiffies + IFX_SPI_TIMEOUT_SEC*HZ;
- add_timer(&ifx_dev->spi_timer);
+ mod_timer(&ifx_dev->spi_timer,jiffies + IFX_SPI_TIMEOUT_SEC*HZ);
}
}
@@ -449,7 +518,7 @@
tx_count-IFX_SPI_HEADER_OVERHEAD,
ifx_dev->spi_more);
/* swap actual data in the buffer */
- swap_buf((u16 *)(ifx_dev->tx_buffer), tx_count,
+ ifx_dev->swap_buf((ifx_dev->tx_buffer), tx_count,
&ifx_dev->tx_buffer[IFX_SPI_TRANSFER_SIZE]);
return tx_count;
}
@@ -469,9 +538,17 @@
{
struct ifx_spi_device *ifx_dev = tty->driver_data;
unsigned char *tmp_buf = (unsigned char *)buf;
- int tx_count = kfifo_in_locked(&ifx_dev->tx_fifo, tmp_buf, count,
- &ifx_dev->fifo_lock);
- mrdy_assert(ifx_dev);
+ unsigned long flags;
+ bool is_fifo_empty;
+ int tx_count;
+
+ spin_lock_irqsave(&ifx_dev->fifo_lock, flags);
+ is_fifo_empty = kfifo_is_empty(&ifx_dev->tx_fifo);
+ tx_count = kfifo_in(&ifx_dev->tx_fifo, tmp_buf, count);
+ spin_unlock_irqrestore(&ifx_dev->fifo_lock, flags);
+ if (is_fifo_empty)
+ mrdy_assert(ifx_dev);
+
return tx_count;
}
@@ -530,12 +607,19 @@
/* clear any old data; can't do this in 'close' */
kfifo_reset(&ifx_dev->tx_fifo);
+ /* clear any flag which may be set in port shutdown procedure */
+ clear_bit(IFX_SPI_STATE_IO_IN_PROGRESS, &ifx_dev->flags);
+ clear_bit(IFX_SPI_STATE_IO_READY, &ifx_dev->flags);
+
/* put port data into this tty */
tty->driver_data = ifx_dev;
/* allows flip string push from int context */
tty->low_latency = 1;
+ /* set flag to allows data transfer */
+ set_bit(IFX_SPI_STATE_IO_AVAILABLE, &ifx_dev->flags);
+
return 0;
}
@@ -551,6 +635,7 @@
struct ifx_spi_device *ifx_dev =
container_of(port, struct ifx_spi_device, tty_port);
+ clear_bit(IFX_SPI_STATE_IO_AVAILABLE, &ifx_dev->flags);
mrdy_set_low(ifx_dev);
clear_bit(IFX_SPI_STATE_TIMER_PENDING, &ifx_dev->flags);
tasklet_kill(&ifx_dev->io_work_tasklet);
@@ -617,7 +702,7 @@
if (!ifx_dev->spi_msg.status) {
/* check header validity, get comm flags */
- swap_buf((u16 *)ifx_dev->rx_buffer, IFX_SPI_HEADER_OVERHEAD,
+ ifx_dev->swap_buf(ifx_dev->rx_buffer, IFX_SPI_HEADER_OVERHEAD,
&ifx_dev->rx_buffer[IFX_SPI_HEADER_OVERHEAD]);
decode_result = ifx_spi_decode_spi_header(ifx_dev->rx_buffer,
&length, &more, &cts);
@@ -636,7 +721,8 @@
actual_length = min((unsigned int)length,
ifx_dev->spi_msg.actual_length);
- swap_buf((u16 *)(ifx_dev->rx_buffer + IFX_SPI_HEADER_OVERHEAD),
+ ifx_dev->swap_buf(
+ (ifx_dev->rx_buffer + IFX_SPI_HEADER_OVERHEAD),
actual_length,
&ifx_dev->rx_buffer[IFX_SPI_TRANSFER_SIZE]);
ifx_spi_insert_flip_string(
@@ -705,7 +791,8 @@
int retval;
struct ifx_spi_device *ifx_dev = (struct ifx_spi_device *) data;
- if (!test_and_set_bit(IFX_SPI_STATE_IO_IN_PROGRESS, &ifx_dev->flags)) {
+ if (!test_and_set_bit(IFX_SPI_STATE_IO_IN_PROGRESS, &ifx_dev->flags) &&
+ test_bit(IFX_SPI_STATE_IO_AVAILABLE, &ifx_dev->flags)) {
if (ifx_dev->gpio.unack_srdy_int_nb > 0)
ifx_dev->gpio.unack_srdy_int_nb--;
@@ -773,6 +860,7 @@
{
if (ifx_dev->tty_dev)
tty_unregister_device(tty_drv, ifx_dev->minor);
+ tty_port_destroy(&ifx_dev->tty_port);
kfifo_free(&ifx_dev->tx_fifo);
}
@@ -806,10 +894,12 @@
dev_dbg(&ifx_dev->spi_dev->dev,
"%s: registering tty device failed", __func__);
ret = PTR_ERR(ifx_dev->tty_dev);
- goto error_ret;
+ goto error_port;
}
return 0;
+error_port:
+ tty_port_destroy(pport);
error_ret:
ifx_spi_free_port(ifx_dev);
return ret;
@@ -826,7 +916,7 @@
static void ifx_spi_handle_srdy(struct ifx_spi_device *ifx_dev)
{
if (test_bit(IFX_SPI_STATE_TIMER_PENDING, &ifx_dev->flags)) {
- del_timer_sync(&ifx_dev->spi_timer);
+ del_timer(&ifx_dev->spi_timer);
clear_bit(IFX_SPI_STATE_TIMER_PENDING, &ifx_dev->flags);
}
@@ -1001,6 +1091,14 @@
return -ENODEV;
}
+ /* init swap_buf function according to word width configuration */
+ if (spi->bits_per_word == 32)
+ ifx_dev->swap_buf = swap_buf_32;
+ else if (spi->bits_per_word == 16)
+ ifx_dev->swap_buf = swap_buf_16;
+ else
+ ifx_dev->swap_buf = swap_buf_8;
+
/* ensure SPI protocol flags are initialized to enable transfer */
ifx_dev->spi_more = 0;
ifx_dev->spi_slave_cts = 0;
@@ -1219,6 +1317,9 @@
static void ifx_spi_spi_shutdown(struct spi_device *spi)
{
+ struct ifx_spi_device *ifx_dev = spi_get_drvdata(spi);
+
+ ifx_modem_power_off(ifx_dev);
}
/*
@@ -1338,7 +1439,7 @@
.owner = THIS_MODULE},
.probe = ifx_spi_spi_probe,
.shutdown = ifx_spi_spi_shutdown,
- .remove = __devexit_p(ifx_spi_spi_remove),
+ .remove = ifx_spi_spi_remove,
.suspend = ifx_spi_spi_suspend,
.resume = ifx_spi_spi_resume,
.id_table = ifx_id_table
@@ -1354,7 +1455,9 @@
{
/* unregister */
tty_unregister_driver(tty_drv);
+ put_tty_driver(tty_drv);
spi_unregister_driver((void *)&ifx_spi_driver);
+ unregister_reboot_notifier(&ifx_modem_reboot_notifier_block);
}
/**
@@ -1389,16 +1492,31 @@
if (result) {
pr_err("%s: tty_register_driver failed(%d)",
DRVNAME, result);
- put_tty_driver(tty_drv);
- return result;
+ goto err_free_tty;
}
result = spi_register_driver((void *)&ifx_spi_driver);
if (result) {
pr_err("%s: spi_register_driver failed(%d)",
DRVNAME, result);
- tty_unregister_driver(tty_drv);
+ goto err_unreg_tty;
}
+
+ result = register_reboot_notifier(&ifx_modem_reboot_notifier_block);
+ if (result) {
+ pr_err("%s: register ifx modem reboot notifier failed(%d)",
+ DRVNAME, result);
+ goto err_unreg_spi;
+ }
+
+ return 0;
+err_unreg_spi:
+ spi_unregister_driver((void *)&ifx_spi_driver);
+err_unreg_tty:
+ tty_unregister_driver(tty_drv);
+err_free_tty:
+ put_tty_driver(tty_drv);
+
return result;
}
diff --git a/drivers/tty/serial/ifx6x60.h b/drivers/tty/serial/ifx6x60.h
index e8464ba..4fbddc2 100644
--- a/drivers/tty/serial/ifx6x60.h
+++ b/drivers/tty/serial/ifx6x60.h
@@ -41,6 +41,7 @@
#define IFX_SPI_STATE_IO_IN_PROGRESS 1
#define IFX_SPI_STATE_IO_READY 2
#define IFX_SPI_STATE_TIMER_PENDING 3
+#define IFX_SPI_STATE_IO_AVAILABLE 4
/* flow control bitfields */
#define IFX_SPI_DCD 0
@@ -124,6 +125,7 @@
#define MR_INPROGRESS 1
#define MR_COMPLETE 2
wait_queue_head_t mdm_reset_wait;
+ void (*swap_buf)(unsigned char *buf, int len, void *end);
};
#endif /* _IFX6X60_H */
diff --git a/drivers/tty/serial/ioc3_serial.c b/drivers/tty/serial/ioc3_serial.c
index 5ac5289..d8f1d1d 100644
--- a/drivers/tty/serial/ioc3_serial.c
+++ b/drivers/tty/serial/ioc3_serial.c
@@ -2010,7 +2010,7 @@
* @idd: ioc3 driver data for this card
*/
-static int __devinit
+static int
ioc3uart_probe(struct ioc3_submodule *is, struct ioc3_driver_data *idd)
{
struct pci_dev *pdev = idd->pdev;
diff --git a/drivers/tty/serial/jsm/jsm.h b/drivers/tty/serial/jsm/jsm.h
index 529bec6..844d5e4 100644
--- a/drivers/tty/serial/jsm/jsm.h
+++ b/drivers/tty/serial/jsm/jsm.h
@@ -57,9 +57,11 @@
DBG_CARR = 0x10000,
};
-#define jsm_printk(nlevel, klevel, pdev, fmt, args...) \
- if ((DBG_##nlevel & jsm_debug)) \
- dev_printk(KERN_##klevel, pdev->dev, fmt, ## args)
+#define jsm_dbg(nlevel, pdev, fmt, ...) \
+do { \
+ if (DBG_##nlevel & jsm_debug) \
+ dev_dbg(pdev->dev, fmt, ##__VA_ARGS__); \
+} while (0)
#define MAXLINES 256
#define MAXPORTS 8
diff --git a/drivers/tty/serial/jsm/jsm_driver.c b/drivers/tty/serial/jsm/jsm_driver.c
index 5ab3c3b..a47d882 100644
--- a/drivers/tty/serial/jsm/jsm_driver.c
+++ b/drivers/tty/serial/jsm/jsm_driver.c
@@ -64,7 +64,7 @@
module_param(jsm_debug, int, 0);
MODULE_PARM_DESC(jsm_debug, "Driver debugging level");
-static int __devinit jsm_probe_one(struct pci_dev *pdev, const struct pci_device_id *ent)
+static int jsm_probe_one(struct pci_dev *pdev, const struct pci_device_id *ent)
{
int rc = 0;
struct jsm_board *brd;
@@ -107,8 +107,7 @@
brd->irq = pdev->irq;
- jsm_printk(INIT, INFO, &brd->pci_dev,
- "jsm_found_board - NEO adapter\n");
+ jsm_dbg(INIT, &brd->pci_dev, "jsm_found_board - NEO adapter\n");
/* get the PCI Base Address Registers */
brd->membase = pci_resource_start(pdev, 0);
@@ -179,7 +178,7 @@
return rc;
}
-static void __devexit jsm_remove_one(struct pci_dev *pdev)
+static void jsm_remove_one(struct pci_dev *pdev)
{
struct jsm_board *brd = pci_get_drvdata(pdev);
int i = 0;
@@ -218,7 +217,7 @@
.name = "jsm",
.id_table = jsm_pci_tbl,
.probe = jsm_probe_one,
- .remove = __devexit_p(jsm_remove_one),
+ .remove = jsm_remove_one,
.err_handler = &jsm_err_handler,
};
diff --git a/drivers/tty/serial/jsm/jsm_neo.c b/drivers/tty/serial/jsm/jsm_neo.c
index 81dfafa..dfaf488 100644
--- a/drivers/tty/serial/jsm/jsm_neo.c
+++ b/drivers/tty/serial/jsm/jsm_neo.c
@@ -52,7 +52,7 @@
ier = readb(&ch->ch_neo_uart->ier);
efr = readb(&ch->ch_neo_uart->efr);
- jsm_printk(PARAM, INFO, &ch->ch_bd->pci_dev, "Setting CTSFLOW\n");
+ jsm_dbg(PARAM, &ch->ch_bd->pci_dev, "Setting CTSFLOW\n");
/* Turn on auto CTS flow control */
ier |= (UART_17158_IER_CTSDSR);
@@ -83,7 +83,7 @@
ier = readb(&ch->ch_neo_uart->ier);
efr = readb(&ch->ch_neo_uart->efr);
- jsm_printk(PARAM, INFO, &ch->ch_bd->pci_dev, "Setting RTSFLOW\n");
+ jsm_dbg(PARAM, &ch->ch_bd->pci_dev, "Setting RTSFLOW\n");
/* Turn on auto RTS flow control */
ier |= (UART_17158_IER_RTSDTR);
@@ -123,7 +123,7 @@
ier = readb(&ch->ch_neo_uart->ier);
efr = readb(&ch->ch_neo_uart->efr);
- jsm_printk(PARAM, INFO, &ch->ch_bd->pci_dev, "Setting IXON FLOW\n");
+ jsm_dbg(PARAM, &ch->ch_bd->pci_dev, "Setting IXON FLOW\n");
/* Turn off auto CTS flow control */
ier &= ~(UART_17158_IER_CTSDSR);
@@ -160,7 +160,7 @@
ier = readb(&ch->ch_neo_uart->ier);
efr = readb(&ch->ch_neo_uart->efr);
- jsm_printk(PARAM, INFO, &ch->ch_bd->pci_dev, "Setting IXOFF FLOW\n");
+ jsm_dbg(PARAM, &ch->ch_bd->pci_dev, "Setting IXOFF FLOW\n");
/* Turn off auto RTS flow control */
ier &= ~(UART_17158_IER_RTSDTR);
@@ -198,7 +198,7 @@
ier = readb(&ch->ch_neo_uart->ier);
efr = readb(&ch->ch_neo_uart->efr);
- jsm_printk(PARAM, INFO, &ch->ch_bd->pci_dev, "Unsetting Input FLOW\n");
+ jsm_dbg(PARAM, &ch->ch_bd->pci_dev, "Unsetting Input FLOW\n");
/* Turn off auto RTS flow control */
ier &= ~(UART_17158_IER_RTSDTR);
@@ -237,7 +237,7 @@
ier = readb(&ch->ch_neo_uart->ier);
efr = readb(&ch->ch_neo_uart->efr);
- jsm_printk(PARAM, INFO, &ch->ch_bd->pci_dev, "Unsetting Output FLOW\n");
+ jsm_dbg(PARAM, &ch->ch_bd->pci_dev, "Unsetting Output FLOW\n");
/* Turn off auto CTS flow control */
ier &= ~(UART_17158_IER_CTSDSR);
@@ -276,7 +276,7 @@
if (ch->ch_c_cflag & CRTSCTS)
return;
- jsm_printk(PARAM, INFO, &ch->ch_bd->pci_dev, "start\n");
+ jsm_dbg(PARAM, &ch->ch_bd->pci_dev, "start\n");
/* Tell UART what start/stop chars it should be looking for */
writeb(ch->ch_startc, &ch->ch_neo_uart->xonchar1);
@@ -455,7 +455,7 @@
* I hope thats okay with everyone? Yes? Good.
*/
while (qleft < 1) {
- jsm_printk(READ, INFO, &ch->ch_bd->pci_dev,
+ jsm_dbg(READ, &ch->ch_bd->pci_dev,
"Queue full, dropping DATA:%x LSR:%x\n",
ch->ch_rqueue[tail], ch->ch_equeue[tail]);
@@ -467,8 +467,8 @@
memcpy_fromio(ch->ch_rqueue + head, &ch->ch_neo_uart->txrxburst, 1);
ch->ch_equeue[head] = (u8) linestatus;
- jsm_printk(READ, INFO, &ch->ch_bd->pci_dev,
- "DATA/LSR pair: %x %x\n", ch->ch_rqueue[head], ch->ch_equeue[head]);
+ jsm_dbg(READ, &ch->ch_bd->pci_dev, "DATA/LSR pair: %x %x\n",
+ ch->ch_rqueue[head], ch->ch_equeue[head]);
/* Ditch any remaining linestatus value. */
linestatus = 0;
@@ -521,8 +521,8 @@
ch->ch_cached_lsr &= ~(UART_LSR_THRE);
writeb(circ->buf[circ->tail], &ch->ch_neo_uart->txrx);
- jsm_printk(WRITE, INFO, &ch->ch_bd->pci_dev,
- "Tx data: %x\n", circ->buf[circ->tail]);
+ jsm_dbg(WRITE, &ch->ch_bd->pci_dev,
+ "Tx data: %x\n", circ->buf[circ->tail]);
circ->tail = (circ->tail + 1) & (UART_XMIT_SIZE - 1);
ch->ch_txcount++;
}
@@ -575,8 +575,9 @@
{
u8 msignals = signals;
- jsm_printk(MSIGS, INFO, &ch->ch_bd->pci_dev,
- "neo_parse_modem: port: %d msignals: %x\n", ch->ch_portnum, msignals);
+ jsm_dbg(MSIGS, &ch->ch_bd->pci_dev,
+ "neo_parse_modem: port: %d msignals: %x\n",
+ ch->ch_portnum, msignals);
/* Scrub off lower bits. They signify delta's, which I don't care about */
/* Keep DDCD and DDSR though */
@@ -606,8 +607,8 @@
else
ch->ch_mistat &= ~UART_MSR_CTS;
- jsm_printk(MSIGS, INFO, &ch->ch_bd->pci_dev,
- "Port: %d DTR: %d RTS: %d CTS: %d DSR: %d " "RI: %d CD: %d\n",
+ jsm_dbg(MSIGS, &ch->ch_bd->pci_dev,
+ "Port: %d DTR: %d RTS: %d CTS: %d DSR: %d " "RI: %d CD: %d\n",
ch->ch_portnum,
!!((ch->ch_mistat | ch->ch_mostat) & UART_MCR_DTR),
!!((ch->ch_mistat | ch->ch_mostat) & UART_MCR_RTS),
@@ -649,8 +650,8 @@
/* Check to see if the UART feels it completely flushed the FIFO. */
tmp = readb(&ch->ch_neo_uart->isr_fcr);
if (tmp & 4) {
- jsm_printk(IOCTL, INFO, &ch->ch_bd->pci_dev,
- "Still flushing TX UART... i: %d\n", i);
+ jsm_dbg(IOCTL, &ch->ch_bd->pci_dev,
+ "Still flushing TX UART... i: %d\n", i);
udelay(10);
}
else
@@ -681,8 +682,8 @@
/* Check to see if the UART feels it completely flushed the FIFO. */
tmp = readb(&ch->ch_neo_uart->isr_fcr);
if (tmp & 2) {
- jsm_printk(IOCTL, INFO, &ch->ch_bd->pci_dev,
- "Still flushing RX UART... i: %d\n", i);
+ jsm_dbg(IOCTL, &ch->ch_bd->pci_dev,
+ "Still flushing RX UART... i: %d\n", i);
udelay(10);
}
else
@@ -705,8 +706,9 @@
writeb((temp & ~UART_LCR_SBC), &ch->ch_neo_uart->lcr);
ch->ch_flags &= ~(CH_BREAK_SENDING);
- jsm_printk(IOCTL, INFO, &ch->ch_bd->pci_dev,
- "clear break Finishing UART_LCR_SBC! finished: %lx\n", jiffies);
+ jsm_dbg(IOCTL, &ch->ch_bd->pci_dev,
+ "clear break Finishing UART_LCR_SBC! finished: %lx\n",
+ jiffies);
/* flush write operation */
neo_pci_posting_flush(ch->ch_bd);
@@ -748,8 +750,8 @@
*/
isr &= ~(UART_17158_IIR_FIFO_ENABLED);
- jsm_printk(INTR, INFO, &ch->ch_bd->pci_dev,
- "%s:%d isr: %x\n", __FILE__, __LINE__, isr);
+ jsm_dbg(INTR, &ch->ch_bd->pci_dev, "%s:%d isr: %x\n",
+ __FILE__, __LINE__, isr);
if (isr & (UART_17158_IIR_RDI_TIMEOUT | UART_IIR_RDI)) {
/* Read data from uart -> queue */
@@ -772,8 +774,9 @@
if (isr & UART_17158_IIR_XONXOFF) {
cause = readb(&ch->ch_neo_uart->xoffchar1);
- jsm_printk(INTR, INFO, &ch->ch_bd->pci_dev,
- "Port %d. Got ISR_XONXOFF: cause:%x\n", port, cause);
+ jsm_dbg(INTR, &ch->ch_bd->pci_dev,
+ "Port %d. Got ISR_XONXOFF: cause:%x\n",
+ port, cause);
/*
* Since the UART detected either an XON or
@@ -786,17 +789,19 @@
if (brd->channels[port]->ch_flags & CH_STOP) {
ch->ch_flags &= ~(CH_STOP);
}
- jsm_printk(INTR, INFO, &ch->ch_bd->pci_dev,
- "Port %d. XON detected in incoming data\n", port);
+ jsm_dbg(INTR, &ch->ch_bd->pci_dev,
+ "Port %d. XON detected in incoming data\n",
+ port);
}
else if (cause == UART_17158_XOFF_DETECT) {
if (!(brd->channels[port]->ch_flags & CH_STOP)) {
ch->ch_flags |= CH_STOP;
- jsm_printk(INTR, INFO, &ch->ch_bd->pci_dev,
- "Setting CH_STOP\n");
+ jsm_dbg(INTR, &ch->ch_bd->pci_dev,
+ "Setting CH_STOP\n");
}
- jsm_printk(INTR, INFO, &ch->ch_bd->pci_dev,
- "Port: %d. XOFF detected in incoming data\n", port);
+ jsm_dbg(INTR, &ch->ch_bd->pci_dev,
+ "Port: %d. XOFF detected in incoming data\n",
+ port);
}
spin_unlock_irqrestore(&ch->ch_lock, lock_flags);
}
@@ -825,8 +830,8 @@
}
/* Parse any modem signal changes */
- jsm_printk(INTR, INFO, &ch->ch_bd->pci_dev,
- "MOD_STAT: sending to parse_modem_sigs\n");
+ jsm_dbg(INTR, &ch->ch_bd->pci_dev,
+ "MOD_STAT: sending to parse_modem_sigs\n");
neo_parse_modem(ch, readb(&ch->ch_neo_uart->msr));
}
}
@@ -849,8 +854,8 @@
linestatus = readb(&ch->ch_neo_uart->lsr);
- jsm_printk(INTR, INFO, &ch->ch_bd->pci_dev,
- "%s:%d port: %d linestatus: %x\n", __FILE__, __LINE__, port, linestatus);
+ jsm_dbg(INTR, &ch->ch_bd->pci_dev, "%s:%d port: %d linestatus: %x\n",
+ __FILE__, __LINE__, port, linestatus);
ch->ch_cached_lsr |= linestatus;
@@ -869,7 +874,7 @@
*to do the special RX+LSR read for this FIFO load.
*/
if (linestatus & UART_17158_RX_FIFO_DATA_ERROR)
- jsm_printk(INTR, DEBUG, &ch->ch_bd->pci_dev,
+ jsm_dbg(INTR, &ch->ch_bd->pci_dev,
"%s:%d Port: %d Got an RX error, need to parse LSR\n",
__FILE__, __LINE__, port);
@@ -880,20 +885,21 @@
if (linestatus & UART_LSR_PE) {
ch->ch_err_parity++;
- jsm_printk(INTR, DEBUG, &ch->ch_bd->pci_dev,
- "%s:%d Port: %d. PAR ERR!\n", __FILE__, __LINE__, port);
+ jsm_dbg(INTR, &ch->ch_bd->pci_dev, "%s:%d Port: %d. PAR ERR!\n",
+ __FILE__, __LINE__, port);
}
if (linestatus & UART_LSR_FE) {
ch->ch_err_frame++;
- jsm_printk(INTR, DEBUG, &ch->ch_bd->pci_dev,
- "%s:%d Port: %d. FRM ERR!\n", __FILE__, __LINE__, port);
+ jsm_dbg(INTR, &ch->ch_bd->pci_dev, "%s:%d Port: %d. FRM ERR!\n",
+ __FILE__, __LINE__, port);
}
if (linestatus & UART_LSR_BI) {
ch->ch_err_break++;
- jsm_printk(INTR, DEBUG, &ch->ch_bd->pci_dev,
- "%s:%d Port: %d. BRK INTR!\n", __FILE__, __LINE__, port);
+ jsm_dbg(INTR, &ch->ch_bd->pci_dev,
+ "%s:%d Port: %d. BRK INTR!\n",
+ __FILE__, __LINE__, port);
}
if (linestatus & UART_LSR_OE) {
@@ -904,8 +910,9 @@
* Probably we should eventually have an orun stat in our driver...
*/
ch->ch_err_overrun++;
- jsm_printk(INTR, DEBUG, &ch->ch_bd->pci_dev,
- "%s:%d Port: %d. Rx Overrun!\n", __FILE__, __LINE__, port);
+ jsm_dbg(INTR, &ch->ch_bd->pci_dev,
+ "%s:%d Port: %d. Rx Overrun!\n",
+ __FILE__, __LINE__, port);
}
if (linestatus & UART_LSR_THRE) {
@@ -1128,11 +1135,11 @@
*/
uart_poll = readl(brd->re_map_membase + UART_17158_POLL_ADDR_OFFSET);
- jsm_printk(INTR, INFO, &brd->pci_dev,
- "%s:%d uart_poll: %x\n", __FILE__, __LINE__, uart_poll);
+ jsm_dbg(INTR, &brd->pci_dev, "%s:%d uart_poll: %x\n",
+ __FILE__, __LINE__, uart_poll);
if (!uart_poll) {
- jsm_printk(INTR, INFO, &brd->pci_dev,
+ jsm_dbg(INTR, &brd->pci_dev,
"Kernel interrupted to me, but no pending interrupts...\n");
spin_unlock_irqrestore(&brd->bd_intr_lock, lock_flags);
return IRQ_NONE;
@@ -1158,15 +1165,15 @@
continue;
}
- jsm_printk(INTR, INFO, &brd->pci_dev,
- "%s:%d port: %x type: %x\n", __FILE__, __LINE__, port, type);
+ jsm_dbg(INTR, &brd->pci_dev, "%s:%d port: %x type: %x\n",
+ __FILE__, __LINE__, port, type);
/* Remove this port + type from uart_poll */
uart_poll &= ~(jsm_offset_table[port]);
if (!type) {
/* If no type, just ignore it, and move onto next port */
- jsm_printk(INTR, ERR, &brd->pci_dev,
+ jsm_dbg(INTR, &brd->pci_dev,
"Interrupt with no type! port: %d\n", port);
continue;
}
@@ -1231,15 +1238,16 @@
* these once and awhile.
* Its harmless, just ignore it and move on.
*/
- jsm_printk(INTR, ERR, &brd->pci_dev,
- "%s:%d Unknown Interrupt type: %x\n", __FILE__, __LINE__, type);
+ jsm_dbg(INTR, &brd->pci_dev,
+ "%s:%d Unknown Interrupt type: %x\n",
+ __FILE__, __LINE__, type);
continue;
}
}
spin_unlock_irqrestore(&brd->bd_intr_lock, lock_flags);
- jsm_printk(INTR, INFO, &brd->pci_dev, "finish.\n");
+ jsm_dbg(INTR, &brd->pci_dev, "finish\n");
return IRQ_HANDLED;
}
diff --git a/drivers/tty/serial/jsm/jsm_tty.c b/drivers/tty/serial/jsm/jsm_tty.c
index 7139796..4c00c55 100644
--- a/drivers/tty/serial/jsm/jsm_tty.c
+++ b/drivers/tty/serial/jsm/jsm_tty.c
@@ -43,7 +43,7 @@
unsigned char mstat;
unsigned result;
- jsm_printk(IOCTL, INFO, &ch->ch_bd->pci_dev, "start\n");
+ jsm_dbg(IOCTL, &ch->ch_bd->pci_dev, "start\n");
mstat = (ch->ch_mostat | ch->ch_mistat);
@@ -62,7 +62,7 @@
if (mstat & UART_MSR_DCD)
result |= TIOCM_CD;
- jsm_printk(IOCTL, INFO, &ch->ch_bd->pci_dev, "finish\n");
+ jsm_dbg(IOCTL, &ch->ch_bd->pci_dev, "finish\n");
return result;
}
@@ -79,14 +79,14 @@
int result;
struct jsm_channel *channel = (struct jsm_channel *)port;
- jsm_printk(IOCTL, INFO, &channel->ch_bd->pci_dev, "start\n");
+ jsm_dbg(IOCTL, &channel->ch_bd->pci_dev, "start\n");
result = jsm_get_mstat(channel);
if (result < 0)
return -ENXIO;
- jsm_printk(IOCTL, INFO, &channel->ch_bd->pci_dev, "finish\n");
+ jsm_dbg(IOCTL, &channel->ch_bd->pci_dev, "finish\n");
return result;
}
@@ -100,7 +100,7 @@
{
struct jsm_channel *channel = (struct jsm_channel *)port;
- jsm_printk(IOCTL, INFO, &channel->ch_bd->pci_dev, "start\n");
+ jsm_dbg(IOCTL, &channel->ch_bd->pci_dev, "start\n");
if (mctrl & TIOCM_RTS)
channel->ch_mostat |= UART_MCR_RTS;
@@ -114,7 +114,7 @@
channel->ch_bd->bd_ops->assert_modem_signals(channel);
- jsm_printk(IOCTL, INFO, &channel->ch_bd->pci_dev, "finish\n");
+ jsm_dbg(IOCTL, &channel->ch_bd->pci_dev, "finish\n");
udelay(10);
}
@@ -135,23 +135,23 @@
{
struct jsm_channel *channel = (struct jsm_channel *)port;
- jsm_printk(IOCTL, INFO, &channel->ch_bd->pci_dev, "start\n");
+ jsm_dbg(IOCTL, &channel->ch_bd->pci_dev, "start\n");
channel->ch_flags &= ~(CH_STOP);
jsm_tty_write(port);
- jsm_printk(IOCTL, INFO, &channel->ch_bd->pci_dev, "finish\n");
+ jsm_dbg(IOCTL, &channel->ch_bd->pci_dev, "finish\n");
}
static void jsm_tty_stop_tx(struct uart_port *port)
{
struct jsm_channel *channel = (struct jsm_channel *)port;
- jsm_printk(IOCTL, INFO, &channel->ch_bd->pci_dev, "start\n");
+ jsm_dbg(IOCTL, &channel->ch_bd->pci_dev, "start\n");
channel->ch_flags |= (CH_STOP);
- jsm_printk(IOCTL, INFO, &channel->ch_bd->pci_dev, "finish\n");
+ jsm_dbg(IOCTL, &channel->ch_bd->pci_dev, "finish\n");
}
static void jsm_tty_send_xchar(struct uart_port *port, char ch)
@@ -216,16 +216,16 @@
if (!channel->ch_rqueue) {
channel->ch_rqueue = kzalloc(RQUEUESIZE, GFP_KERNEL);
if (!channel->ch_rqueue) {
- jsm_printk(INIT, ERR, &channel->ch_bd->pci_dev,
- "unable to allocate read queue buf");
+ jsm_dbg(INIT, &channel->ch_bd->pci_dev,
+ "unable to allocate read queue buf\n");
return -ENOMEM;
}
}
if (!channel->ch_equeue) {
channel->ch_equeue = kzalloc(EQUEUESIZE, GFP_KERNEL);
if (!channel->ch_equeue) {
- jsm_printk(INIT, ERR, &channel->ch_bd->pci_dev,
- "unable to allocate error queue buf");
+ jsm_dbg(INIT, &channel->ch_bd->pci_dev,
+ "unable to allocate error queue buf\n");
return -ENOMEM;
}
}
@@ -234,7 +234,7 @@
/*
* Initialize if neither terminal is open.
*/
- jsm_printk(OPEN, INFO, &channel->ch_bd->pci_dev,
+ jsm_dbg(OPEN, &channel->ch_bd->pci_dev,
"jsm_open: initializing channel in open...\n");
/*
@@ -270,7 +270,7 @@
channel->ch_open_count++;
- jsm_printk(OPEN, INFO, &channel->ch_bd->pci_dev, "finish\n");
+ jsm_dbg(OPEN, &channel->ch_bd->pci_dev, "finish\n");
return 0;
}
@@ -280,7 +280,7 @@
struct ktermios *ts;
struct jsm_channel *channel = (struct jsm_channel *)port;
- jsm_printk(CLOSE, INFO, &channel->ch_bd->pci_dev, "start\n");
+ jsm_dbg(CLOSE, &channel->ch_bd->pci_dev, "start\n");
bd = channel->ch_bd;
ts = &port->state->port.tty->termios;
@@ -293,7 +293,7 @@
* If we have HUPCL set, lower DTR and RTS
*/
if (channel->ch_c_cflag & HUPCL) {
- jsm_printk(CLOSE, INFO, &channel->ch_bd->pci_dev,
+ jsm_dbg(CLOSE, &channel->ch_bd->pci_dev,
"Close. HUPCL set, dropping DTR/RTS\n");
/* Drop RTS/DTR */
@@ -304,7 +304,7 @@
/* Turn off UART interrupts for this port */
channel->ch_bd->bd_ops->uart_off(channel);
- jsm_printk(CLOSE, INFO, &channel->ch_bd->pci_dev, "finish\n");
+ jsm_dbg(CLOSE, &channel->ch_bd->pci_dev, "finish\n");
}
static void jsm_tty_set_termios(struct uart_port *port,
@@ -371,7 +371,7 @@
* Init the tty subsystem. Called once per board after board has been
* downloaded and init'ed.
*/
-int __devinit jsm_tty_init(struct jsm_board *brd)
+int jsm_tty_init(struct jsm_board *brd)
{
int i;
void __iomem *vaddr;
@@ -380,7 +380,7 @@
if (!brd)
return -ENXIO;
- jsm_printk(INIT, INFO, &brd->pci_dev, "start\n");
+ jsm_dbg(INIT, &brd->pci_dev, "start\n");
/*
* Initialize board structure elements.
@@ -401,9 +401,9 @@
*/
brd->channels[i] = kzalloc(sizeof(struct jsm_channel), GFP_KERNEL);
if (!brd->channels[i]) {
- jsm_printk(CORE, ERR, &brd->pci_dev,
+ jsm_dbg(CORE, &brd->pci_dev,
"%s:%d Unable to allocate memory for channel struct\n",
- __FILE__, __LINE__);
+ __FILE__, __LINE__);
}
}
}
@@ -431,7 +431,7 @@
init_waitqueue_head(&ch->ch_flags_wait);
}
- jsm_printk(INIT, INFO, &brd->pci_dev, "finish\n");
+ jsm_dbg(INIT, &brd->pci_dev, "finish\n");
return 0;
}
@@ -444,7 +444,7 @@
if (!brd)
return -ENXIO;
- jsm_printk(INIT, INFO, &brd->pci_dev, "start\n");
+ jsm_dbg(INIT, &brd->pci_dev, "start\n");
/*
* Initialize board structure elements.
@@ -481,7 +481,7 @@
printk(KERN_INFO "jsm: Port %d added\n", i);
}
- jsm_printk(INIT, INFO, &brd->pci_dev, "finish\n");
+ jsm_dbg(INIT, &brd->pci_dev, "finish\n");
return 0;
}
@@ -493,7 +493,7 @@
if (!brd)
return -ENXIO;
- jsm_printk(INIT, INFO, &brd->pci_dev, "start\n");
+ jsm_dbg(INIT, &brd->pci_dev, "start\n");
/*
* Initialize board structure elements.
@@ -513,7 +513,7 @@
uart_remove_one_port(&jsm_uart_driver, &brd->channels[i]->uart_port);
}
- jsm_printk(INIT, INFO, &brd->pci_dev, "finish\n");
+ jsm_dbg(INIT, &brd->pci_dev, "finish\n");
return 0;
}
@@ -531,7 +531,7 @@
int s = 0;
int i = 0;
- jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, "start\n");
+ jsm_dbg(READ, &ch->ch_bd->pci_dev, "start\n");
if (!ch)
return;
@@ -560,7 +560,7 @@
return;
}
- jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, "start\n");
+ jsm_dbg(READ, &ch->ch_bd->pci_dev, "start\n");
/*
*If the device is not open, or CREAD is off, flush
@@ -569,8 +569,9 @@
if (!tp ||
!(tp->termios.c_cflag & CREAD) ) {
- jsm_printk(READ, INFO, &ch->ch_bd->pci_dev,
- "input. dropping %d bytes on port %d...\n", data_len, ch->ch_portnum);
+ jsm_dbg(READ, &ch->ch_bd->pci_dev,
+ "input. dropping %d bytes on port %d...\n",
+ data_len, ch->ch_portnum);
ch->ch_r_head = tail;
/* Force queue flow control to be released, if needed */
@@ -585,17 +586,17 @@
*/
if (ch->ch_flags & CH_STOPI) {
spin_unlock_irqrestore(&ch->ch_lock, lock_flags);
- jsm_printk(READ, INFO, &ch->ch_bd->pci_dev,
+ jsm_dbg(READ, &ch->ch_bd->pci_dev,
"Port %d throttled, not reading any data. head: %x tail: %x\n",
ch->ch_portnum, head, tail);
return;
}
- jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, "start 2\n");
+ jsm_dbg(READ, &ch->ch_bd->pci_dev, "start 2\n");
if (data_len <= 0) {
spin_unlock_irqrestore(&ch->ch_lock, lock_flags);
- jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, "jsm_input 1\n");
+ jsm_dbg(READ, &ch->ch_bd->pci_dev, "jsm_input 1\n");
return;
}
@@ -653,7 +654,7 @@
/* Tell the tty layer its okay to "eat" the data now */
tty_flip_buffer_push(tp);
- jsm_printk(IOCTL, INFO, &ch->ch_bd->pci_dev, "finish\n");
+ jsm_dbg(IOCTL, &ch->ch_bd->pci_dev, "finish\n");
}
static void jsm_carrier(struct jsm_channel *ch)
@@ -663,7 +664,7 @@
int virt_carrier = 0;
int phys_carrier = 0;
- jsm_printk(CARR, INFO, &ch->ch_bd->pci_dev, "start\n");
+ jsm_dbg(CARR, &ch->ch_bd->pci_dev, "start\n");
if (!ch)
return;
@@ -673,16 +674,16 @@
return;
if (ch->ch_mistat & UART_MSR_DCD) {
- jsm_printk(CARR, INFO, &ch->ch_bd->pci_dev,
- "mistat: %x D_CD: %x\n", ch->ch_mistat, ch->ch_mistat & UART_MSR_DCD);
+ jsm_dbg(CARR, &ch->ch_bd->pci_dev, "mistat: %x D_CD: %x\n",
+ ch->ch_mistat, ch->ch_mistat & UART_MSR_DCD);
phys_carrier = 1;
}
if (ch->ch_c_cflag & CLOCAL)
virt_carrier = 1;
- jsm_printk(CARR, INFO, &ch->ch_bd->pci_dev,
- "DCD: physical: %d virt: %d\n", phys_carrier, virt_carrier);
+ jsm_dbg(CARR, &ch->ch_bd->pci_dev, "DCD: physical: %d virt: %d\n",
+ phys_carrier, virt_carrier);
/*
* Test for a VIRTUAL carrier transition to HIGH.
@@ -694,8 +695,7 @@
* for carrier in the open routine.
*/
- jsm_printk(CARR, INFO, &ch->ch_bd->pci_dev,
- "carrier: virt DCD rose\n");
+ jsm_dbg(CARR, &ch->ch_bd->pci_dev, "carrier: virt DCD rose\n");
if (waitqueue_active(&(ch->ch_flags_wait)))
wake_up_interruptible(&ch->ch_flags_wait);
@@ -711,7 +711,7 @@
* for carrier in the open routine.
*/
- jsm_printk(CARR, INFO, &ch->ch_bd->pci_dev,
+ jsm_dbg(CARR, &ch->ch_bd->pci_dev,
"carrier: physical DCD rose\n");
if (waitqueue_active(&(ch->ch_flags_wait)))
@@ -790,8 +790,8 @@
if(!(ch->ch_flags & CH_RECEIVER_OFF)) {
bd_ops->disable_receiver(ch);
ch->ch_flags |= (CH_RECEIVER_OFF);
- jsm_printk(READ, INFO, &ch->ch_bd->pci_dev,
- "Internal queue hit hilevel mark (%d)! Turning off interrupts.\n",
+ jsm_dbg(READ, &ch->ch_bd->pci_dev,
+ "Internal queue hit hilevel mark (%d)! Turning off interrupts\n",
qleft);
}
}
@@ -800,8 +800,9 @@
if (ch->ch_stops_sent <= MAX_STOPS_SENT) {
bd_ops->send_stop_character(ch);
ch->ch_stops_sent++;
- jsm_printk(READ, INFO, &ch->ch_bd->pci_dev,
- "Sending stop char! Times sent: %x\n", ch->ch_stops_sent);
+ jsm_dbg(READ, &ch->ch_bd->pci_dev,
+ "Sending stop char! Times sent: %x\n",
+ ch->ch_stops_sent);
}
}
}
@@ -827,8 +828,8 @@
if (ch->ch_flags & CH_RECEIVER_OFF) {
bd_ops->enable_receiver(ch);
ch->ch_flags &= ~(CH_RECEIVER_OFF);
- jsm_printk(READ, INFO, &ch->ch_bd->pci_dev,
- "Internal queue hit lowlevel mark (%d)! Turning on interrupts.\n",
+ jsm_dbg(READ, &ch->ch_bd->pci_dev,
+ "Internal queue hit lowlevel mark (%d)! Turning on interrupts\n",
qleft);
}
}
@@ -836,7 +837,8 @@
else if (ch->ch_c_iflag & IXOFF && ch->ch_stops_sent) {
ch->ch_stops_sent = 0;
bd_ops->send_start_character(ch);
- jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, "Sending start char!\n");
+ jsm_dbg(READ, &ch->ch_bd->pci_dev,
+ "Sending start char!\n");
}
}
}
diff --git a/drivers/tty/serial/kgdb_nmi.c b/drivers/tty/serial/kgdb_nmi.c
index d185247..6ac2b79 100644
--- a/drivers/tty/serial/kgdb_nmi.c
+++ b/drivers/tty/serial/kgdb_nmi.c
@@ -266,6 +266,7 @@
}
return 0;
err:
+ tty_port_destroy(&priv->port);
kfree(priv);
return ret;
}
@@ -275,6 +276,7 @@
struct kgdb_nmi_tty_priv *priv = tty->driver_data;
tty->driver_data = NULL;
+ tty_port_destroy(&priv->port);
kfree(priv);
}
diff --git a/drivers/tty/serial/lpc32xx_hs.c b/drivers/tty/serial/lpc32xx_hs.c
index ba3af3b..0e86bff 100644
--- a/drivers/tty/serial/lpc32xx_hs.c
+++ b/drivers/tty/serial/lpc32xx_hs.c
@@ -686,7 +686,7 @@
/*
* Register a set of serial devices attached to a platform device
*/
-static int __devinit serial_hs_lpc32xx_probe(struct platform_device *pdev)
+static int serial_hs_lpc32xx_probe(struct platform_device *pdev)
{
struct lpc32xx_hsuart_port *p = &lpc32xx_hs_ports[uarts_registered];
int ret = 0;
@@ -740,7 +740,7 @@
/*
* Remove serial ports registered against a platform device.
*/
-static int __devexit serial_hs_lpc32xx_remove(struct platform_device *pdev)
+static int serial_hs_lpc32xx_remove(struct platform_device *pdev)
{
struct lpc32xx_hsuart_port *p = platform_get_drvdata(pdev);
@@ -783,7 +783,7 @@
static struct platform_driver serial_hs_lpc32xx_driver = {
.probe = serial_hs_lpc32xx_probe,
- .remove = __devexit_p(serial_hs_lpc32xx_remove),
+ .remove = serial_hs_lpc32xx_remove,
.suspend = serial_hs_lpc32xx_suspend,
.resume = serial_hs_lpc32xx_resume,
.driver = {
diff --git a/drivers/tty/serial/max3100.c b/drivers/tty/serial/max3100.c
index 0f24486..7ce3197 100644
--- a/drivers/tty/serial/max3100.c
+++ b/drivers/tty/serial/max3100.c
@@ -742,7 +742,7 @@
};
static int uart_driver_registered;
-static int __devinit max3100_probe(struct spi_device *spi)
+static int max3100_probe(struct spi_device *spi)
{
int i, retval;
struct plat_max3100 *pdata;
@@ -818,7 +818,7 @@
return 0;
}
-static int __devexit max3100_remove(struct spi_device *spi)
+static int max3100_remove(struct spi_device *spi)
{
struct max3100_port *s = dev_get_drvdata(&spi->dev);
int i;
@@ -907,7 +907,7 @@
},
.probe = max3100_probe,
- .remove = __devexit_p(max3100_remove),
+ .remove = max3100_remove,
.suspend = max3100_suspend,
.resume = max3100_resume,
};
diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c
index 1ab1d2c..a801f68 100644
--- a/drivers/tty/serial/max310x.c
+++ b/drivers/tty/serial/max310x.c
@@ -378,7 +378,7 @@
}
}
-static int __devinit max310x_update_best_err(unsigned long f, long *besterr)
+static int max310x_update_best_err(unsigned long f, long *besterr)
{
/* Use baudrate 115200 for calculate error */
long err = f % (115200 * 16);
@@ -391,7 +391,7 @@
return 1;
}
-static int __devinit max310x_set_ref_clk(struct max310x_port *s)
+static int max310x_set_ref_clk(struct max310x_port *s)
{
unsigned int div, clksrc, pllcfg = 0;
long besterr = -1;
@@ -995,7 +995,7 @@
.frequency = 26000000,
};
-static int __devinit max310x_probe(struct spi_device *spi)
+static int max310x_probe(struct spi_device *spi)
{
struct max310x_port *s;
struct device *dev = &spi->dev;
@@ -1178,6 +1178,7 @@
s->gpio.set = max310x_gpio_set;
s->gpio.base = pdata->gpio_base;
s->gpio.ngpio = s->nr_gpio;
+ s->gpio.can_sleep = 1;
if (gpiochip_add(&s->gpio)) {
/* Indicate that we should not call gpiochip_remove */
s->gpio.base = 0;
@@ -1202,7 +1203,7 @@
return ret;
}
-static int __devexit max310x_remove(struct spi_device *spi)
+static int max310x_remove(struct spi_device *spi)
{
struct device *dev = &spi->dev;
struct max310x_port *s = dev_get_drvdata(dev);
@@ -1249,7 +1250,7 @@
.owner = THIS_MODULE,
},
.probe = max310x_probe,
- .remove = __devexit_p(max310x_remove),
+ .remove = max310x_remove,
.suspend = max310x_suspend,
.resume = max310x_resume,
.id_table = max310x_id_table,
diff --git a/drivers/tty/serial/mcf.c b/drivers/tty/serial/mcf.c
index 9afca09..fcd56ab 100644
--- a/drivers/tty/serial/mcf.c
+++ b/drivers/tty/serial/mcf.c
@@ -571,7 +571,7 @@
/****************************************************************************/
-static int __devinit mcf_probe(struct platform_device *pdev)
+static int mcf_probe(struct platform_device *pdev)
{
struct mcf_platform_uart *platp = pdev->dev.platform_data;
struct uart_port *port;
@@ -599,7 +599,7 @@
/****************************************************************************/
-static int __devexit mcf_remove(struct platform_device *pdev)
+static int mcf_remove(struct platform_device *pdev)
{
struct uart_port *port;
int i;
@@ -617,7 +617,7 @@
static struct platform_driver mcf_platform_driver = {
.probe = mcf_probe,
- .remove = __devexit_p(mcf_remove),
+ .remove = mcf_remove,
.driver = {
.name = "mcfuart",
.owner = THIS_MODULE,
diff --git a/drivers/tty/serial/mfd.c b/drivers/tty/serial/mfd.c
index c4b50af..2c01344 100644
--- a/drivers/tty/serial/mfd.c
+++ b/drivers/tty/serial/mfd.c
@@ -36,6 +36,7 @@
#include <linux/serial_mfd.h>
#include <linux/dma-mapping.h>
#include <linux/pci.h>
+#include <linux/nmi.h>
#include <linux/io.h>
#include <linux/debugfs.h>
#include <linux/pm_runtime.h>
@@ -1113,6 +1114,8 @@
unsigned int ier;
int locked = 1;
+ touch_nmi_watchdog();
+
local_irq_save(flags);
if (up->port.sysrq)
locked = 0;
@@ -1456,7 +1459,7 @@
}
/* First 3 are UART ports, and the 4th is the DMA */
-static const struct pci_device_id pci_ids[] __devinitconst = {
+static const struct pci_device_id pci_ids[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x081B) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x081C) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x081D) },
@@ -1468,7 +1471,7 @@
.name = "HSU serial",
.id_table = pci_ids,
.probe = serial_hsu_probe,
- .remove = __devexit_p(serial_hsu_remove),
+ .remove = serial_hsu_remove,
.suspend = serial_hsu_suspend,
.resume = serial_hsu_resume,
.driver = {
diff --git a/drivers/tty/serial/mpc52xx_uart.c b/drivers/tty/serial/mpc52xx_uart.c
index 8cf5770..7c23c4f 100644
--- a/drivers/tty/serial/mpc52xx_uart.c
+++ b/drivers/tty/serial/mpc52xx_uart.c
@@ -1308,7 +1308,7 @@
{},
};
-static int __devinit mpc52xx_uart_of_probe(struct platform_device *op)
+static int mpc52xx_uart_of_probe(struct platform_device *op)
{
int idx = -1;
unsigned int uartclk;
diff --git a/drivers/tty/serial/mrst_max3110.c b/drivers/tty/serial/mrst_max3110.c
index df2a224..58734d7 100644
--- a/drivers/tty/serial/mrst_max3110.c
+++ b/drivers/tty/serial/mrst_max3110.c
@@ -773,7 +773,7 @@
#define serial_m3110_resume NULL
#endif
-static int __devinit serial_m3110_probe(struct spi_device *spi)
+static int serial_m3110_probe(struct spi_device *spi)
{
struct uart_max3110 *max;
void *buffer;
@@ -855,7 +855,7 @@
return ret;
}
-static int __devexit serial_m3110_remove(struct spi_device *dev)
+static int serial_m3110_remove(struct spi_device *dev)
{
struct uart_max3110 *max = spi_get_drvdata(dev);
@@ -879,7 +879,7 @@
.owner = THIS_MODULE,
},
.probe = serial_m3110_probe,
- .remove = __devexit_p(serial_m3110_remove),
+ .remove = serial_m3110_remove,
.suspend = serial_m3110_suspend,
.resume = serial_m3110_resume,
};
diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c
index 033e0bc..95fd39b 100644
--- a/drivers/tty/serial/msm_serial.c
+++ b/drivers/tty/serial/msm_serial.c
@@ -917,7 +917,7 @@
return uart_add_one_port(&msm_uart_driver, port);
}
-static int __devexit msm_serial_remove(struct platform_device *pdev)
+static int msm_serial_remove(struct platform_device *pdev)
{
struct msm_port *msm_port = platform_get_drvdata(pdev);
diff --git a/drivers/tty/serial/msm_serial_hs.c b/drivers/tty/serial/msm_serial_hs.c
index fca13dc..1fa9228 100644
--- a/drivers/tty/serial/msm_serial_hs.c
+++ b/drivers/tty/serial/msm_serial_hs.c
@@ -401,7 +401,7 @@
return 0;
}
-static int __devexit msm_hs_remove(struct platform_device *pdev)
+static int msm_hs_remove(struct platform_device *pdev)
{
struct msm_hs_port *msm_uport;
@@ -1521,7 +1521,7 @@
}
/* Initialize tx and rx data structures */
-static int __devinit uartdm_init_port(struct uart_port *uport)
+static int uartdm_init_port(struct uart_port *uport)
{
int ret = 0;
struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
@@ -1614,7 +1614,7 @@
return ret;
}
-static int __devinit msm_hs_probe(struct platform_device *pdev)
+static int msm_hs_probe(struct platform_device *pdev)
{
int ret;
struct uart_port *uport;
@@ -1838,7 +1838,7 @@
static struct platform_driver msm_serial_hs_platform_driver = {
.probe = msm_hs_probe,
- .remove = __devexit_p(msm_hs_remove),
+ .remove = msm_hs_remove,
.driver = {
.name = "msm_serial_hs",
.owner = THIS_MODULE,
diff --git a/drivers/tty/serial/mux.c b/drivers/tty/serial/mux.c
index 7ea8a26..e2775b6 100644
--- a/drivers/tty/serial/mux.c
+++ b/drivers/tty/serial/mux.c
@@ -520,7 +520,7 @@
return 0;
}
-static int __devexit mux_remove(struct parisc_device *dev)
+static int mux_remove(struct parisc_device *dev)
{
int i, j;
int port_count = (long)dev_get_drvdata(&dev->dev);
@@ -571,14 +571,14 @@
.name = "builtin_serial_mux",
.id_table = builtin_mux_tbl,
.probe = mux_probe,
- .remove = __devexit_p(mux_remove),
+ .remove = mux_remove,
};
static struct parisc_driver serial_mux_driver = {
.name = "serial_mux",
.id_table = mux_tbl,
.probe = mux_probe,
- .remove = __devexit_p(mux_remove),
+ .remove = mux_remove,
};
/**
diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c
index 6db3baa..6db23b0 100644
--- a/drivers/tty/serial/mxs-auart.c
+++ b/drivers/tty/serial/mxs-auart.c
@@ -34,6 +34,8 @@
#include <linux/io.h>
#include <linux/pinctrl/consumer.h>
#include <linux/of_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/fsl/mxs-dma.h>
#include <asm/cacheflush.h>
@@ -71,6 +73,15 @@
#define AUART_CTRL0_SFTRST (1 << 31)
#define AUART_CTRL0_CLKGATE (1 << 30)
+#define AUART_CTRL0_RXTO_ENABLE (1 << 27)
+#define AUART_CTRL0_RXTIMEOUT(v) (((v) & 0x7ff) << 16)
+#define AUART_CTRL0_XFER_COUNT(v) ((v) & 0xffff)
+
+#define AUART_CTRL1_XFER_COUNT(v) ((v) & 0xffff)
+
+#define AUART_CTRL2_DMAONERR (1 << 26)
+#define AUART_CTRL2_TXDMAE (1 << 25)
+#define AUART_CTRL2_RXDMAE (1 << 24)
#define AUART_CTRL2_CTSEN (1 << 15)
#define AUART_CTRL2_RTSEN (1 << 14)
@@ -111,29 +122,170 @@
#define AUART_STAT_BERR (1 << 18)
#define AUART_STAT_PERR (1 << 17)
#define AUART_STAT_FERR (1 << 16)
+#define AUART_STAT_RXCOUNT_MASK 0xffff
static struct uart_driver auart_driver;
+enum mxs_auart_type {
+ IMX23_AUART,
+ IMX28_AUART,
+};
+
struct mxs_auart_port {
struct uart_port port;
- unsigned int flags;
+#define MXS_AUART_DMA_CONFIG 0x1
+#define MXS_AUART_DMA_ENABLED 0x2
+#define MXS_AUART_DMA_TX_SYNC 2 /* bit 2 */
+#define MXS_AUART_DMA_RX_READY 3 /* bit 3 */
+ unsigned long flags;
unsigned int ctrl;
+ enum mxs_auart_type devtype;
unsigned int irq;
struct clk *clk;
struct device *dev;
+
+ /* for DMA */
+ struct mxs_dma_data dma_data;
+ int dma_channel_rx, dma_channel_tx;
+ int dma_irq_rx, dma_irq_tx;
+ int dma_channel;
+
+ struct scatterlist tx_sgl;
+ struct dma_chan *tx_dma_chan;
+ void *tx_dma_buf;
+
+ struct scatterlist rx_sgl;
+ struct dma_chan *rx_dma_chan;
+ void *rx_dma_buf;
};
+static struct platform_device_id mxs_auart_devtype[] = {
+ { .name = "mxs-auart-imx23", .driver_data = IMX23_AUART },
+ { .name = "mxs-auart-imx28", .driver_data = IMX28_AUART },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(platform, mxs_auart_devtype);
+
+static struct of_device_id mxs_auart_dt_ids[] = {
+ {
+ .compatible = "fsl,imx28-auart",
+ .data = &mxs_auart_devtype[IMX28_AUART]
+ }, {
+ .compatible = "fsl,imx23-auart",
+ .data = &mxs_auart_devtype[IMX23_AUART]
+ }, { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, mxs_auart_dt_ids);
+
+static inline int is_imx28_auart(struct mxs_auart_port *s)
+{
+ return s->devtype == IMX28_AUART;
+}
+
+static inline bool auart_dma_enabled(struct mxs_auart_port *s)
+{
+ return s->flags & MXS_AUART_DMA_ENABLED;
+}
+
static void mxs_auart_stop_tx(struct uart_port *u);
#define to_auart_port(u) container_of(u, struct mxs_auart_port, port)
-static inline void mxs_auart_tx_chars(struct mxs_auart_port *s)
+static void mxs_auart_tx_chars(struct mxs_auart_port *s);
+
+static void dma_tx_callback(void *param)
+{
+ struct mxs_auart_port *s = param;
+ struct circ_buf *xmit = &s->port.state->xmit;
+
+ dma_unmap_sg(s->dev, &s->tx_sgl, 1, DMA_TO_DEVICE);
+
+ /* clear the bit used to serialize the DMA tx. */
+ clear_bit(MXS_AUART_DMA_TX_SYNC, &s->flags);
+ smp_mb__after_clear_bit();
+
+ /* wake up the possible processes. */
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(&s->port);
+
+ mxs_auart_tx_chars(s);
+}
+
+static int mxs_auart_dma_tx(struct mxs_auart_port *s, int size)
+{
+ struct dma_async_tx_descriptor *desc;
+ struct scatterlist *sgl = &s->tx_sgl;
+ struct dma_chan *channel = s->tx_dma_chan;
+ u32 pio;
+
+ /* [1] : send PIO. Note, the first pio word is CTRL1. */
+ pio = AUART_CTRL1_XFER_COUNT(size);
+ desc = dmaengine_prep_slave_sg(channel, (struct scatterlist *)&pio,
+ 1, DMA_TRANS_NONE, 0);
+ if (!desc) {
+ dev_err(s->dev, "step 1 error\n");
+ return -EINVAL;
+ }
+
+ /* [2] : set DMA buffer. */
+ sg_init_one(sgl, s->tx_dma_buf, size);
+ dma_map_sg(s->dev, sgl, 1, DMA_TO_DEVICE);
+ desc = dmaengine_prep_slave_sg(channel, sgl,
+ 1, DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ if (!desc) {
+ dev_err(s->dev, "step 2 error\n");
+ return -EINVAL;
+ }
+
+ /* [3] : submit the DMA */
+ desc->callback = dma_tx_callback;
+ desc->callback_param = s;
+ dmaengine_submit(desc);
+ dma_async_issue_pending(channel);
+ return 0;
+}
+
+static void mxs_auart_tx_chars(struct mxs_auart_port *s)
{
struct circ_buf *xmit = &s->port.state->xmit;
+ if (auart_dma_enabled(s)) {
+ int i = 0;
+ int size;
+ void *buffer = s->tx_dma_buf;
+
+ if (test_and_set_bit(MXS_AUART_DMA_TX_SYNC, &s->flags))
+ return;
+
+ while (!uart_circ_empty(xmit) && !uart_tx_stopped(&s->port)) {
+ size = min_t(u32, UART_XMIT_SIZE - i,
+ CIRC_CNT_TO_END(xmit->head,
+ xmit->tail,
+ UART_XMIT_SIZE));
+ memcpy(buffer + i, xmit->buf + xmit->tail, size);
+ xmit->tail = (xmit->tail + size) & (UART_XMIT_SIZE - 1);
+
+ i += size;
+ if (i >= UART_XMIT_SIZE)
+ break;
+ }
+
+ if (uart_tx_stopped(&s->port))
+ mxs_auart_stop_tx(&s->port);
+
+ if (i) {
+ mxs_auart_dma_tx(s, i);
+ } else {
+ clear_bit(MXS_AUART_DMA_TX_SYNC, &s->flags);
+ smp_mb__after_clear_bit();
+ }
+ return;
+ }
+
+
while (!(readl(s->port.membase + AUART_STAT) &
AUART_STAT_TXFF)) {
if (s->port.x_char) {
@@ -287,10 +439,159 @@
return mctrl;
}
+static bool mxs_auart_dma_filter(struct dma_chan *chan, void *param)
+{
+ struct mxs_auart_port *s = param;
+
+ if (!mxs_dma_is_apbx(chan))
+ return false;
+
+ if (s->dma_channel == chan->chan_id) {
+ chan->private = &s->dma_data;
+ return true;
+ }
+ return false;
+}
+
+static int mxs_auart_dma_prep_rx(struct mxs_auart_port *s);
+static void dma_rx_callback(void *arg)
+{
+ struct mxs_auart_port *s = (struct mxs_auart_port *) arg;
+ struct tty_struct *tty = s->port.state->port.tty;
+ int count;
+ u32 stat;
+
+ dma_unmap_sg(s->dev, &s->rx_sgl, 1, DMA_FROM_DEVICE);
+
+ stat = readl(s->port.membase + AUART_STAT);
+ stat &= ~(AUART_STAT_OERR | AUART_STAT_BERR |
+ AUART_STAT_PERR | AUART_STAT_FERR);
+
+ count = stat & AUART_STAT_RXCOUNT_MASK;
+ tty_insert_flip_string(tty, s->rx_dma_buf, count);
+
+ writel(stat, s->port.membase + AUART_STAT);
+ tty_flip_buffer_push(tty);
+
+ /* start the next DMA for RX. */
+ mxs_auart_dma_prep_rx(s);
+}
+
+static int mxs_auart_dma_prep_rx(struct mxs_auart_port *s)
+{
+ struct dma_async_tx_descriptor *desc;
+ struct scatterlist *sgl = &s->rx_sgl;
+ struct dma_chan *channel = s->rx_dma_chan;
+ u32 pio[1];
+
+ /* [1] : send PIO */
+ pio[0] = AUART_CTRL0_RXTO_ENABLE
+ | AUART_CTRL0_RXTIMEOUT(0x80)
+ | AUART_CTRL0_XFER_COUNT(UART_XMIT_SIZE);
+ desc = dmaengine_prep_slave_sg(channel, (struct scatterlist *)pio,
+ 1, DMA_TRANS_NONE, 0);
+ if (!desc) {
+ dev_err(s->dev, "step 1 error\n");
+ return -EINVAL;
+ }
+
+ /* [2] : send DMA request */
+ sg_init_one(sgl, s->rx_dma_buf, UART_XMIT_SIZE);
+ dma_map_sg(s->dev, sgl, 1, DMA_FROM_DEVICE);
+ desc = dmaengine_prep_slave_sg(channel, sgl, 1, DMA_DEV_TO_MEM,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ if (!desc) {
+ dev_err(s->dev, "step 2 error\n");
+ return -1;
+ }
+
+ /* [3] : submit the DMA, but do not issue it. */
+ desc->callback = dma_rx_callback;
+ desc->callback_param = s;
+ dmaengine_submit(desc);
+ dma_async_issue_pending(channel);
+ return 0;
+}
+
+static void mxs_auart_dma_exit_channel(struct mxs_auart_port *s)
+{
+ if (s->tx_dma_chan) {
+ dma_release_channel(s->tx_dma_chan);
+ s->tx_dma_chan = NULL;
+ }
+ if (s->rx_dma_chan) {
+ dma_release_channel(s->rx_dma_chan);
+ s->rx_dma_chan = NULL;
+ }
+
+ kfree(s->tx_dma_buf);
+ kfree(s->rx_dma_buf);
+ s->tx_dma_buf = NULL;
+ s->rx_dma_buf = NULL;
+}
+
+static void mxs_auart_dma_exit(struct mxs_auart_port *s)
+{
+
+ writel(AUART_CTRL2_TXDMAE | AUART_CTRL2_RXDMAE | AUART_CTRL2_DMAONERR,
+ s->port.membase + AUART_CTRL2_CLR);
+
+ mxs_auart_dma_exit_channel(s);
+ s->flags &= ~MXS_AUART_DMA_ENABLED;
+ clear_bit(MXS_AUART_DMA_TX_SYNC, &s->flags);
+ clear_bit(MXS_AUART_DMA_RX_READY, &s->flags);
+}
+
+static int mxs_auart_dma_init(struct mxs_auart_port *s)
+{
+ dma_cap_mask_t mask;
+
+ if (auart_dma_enabled(s))
+ return 0;
+
+ /* We do not get the right DMA channels. */
+ if (s->dma_channel_rx == -1 || s->dma_channel_rx == -1)
+ return -EINVAL;
+
+ /* init for RX */
+ dma_cap_zero(mask);
+ dma_cap_set(DMA_SLAVE, mask);
+ s->dma_channel = s->dma_channel_rx;
+ s->dma_data.chan_irq = s->dma_irq_rx;
+ s->rx_dma_chan = dma_request_channel(mask, mxs_auart_dma_filter, s);
+ if (!s->rx_dma_chan)
+ goto err_out;
+ s->rx_dma_buf = kzalloc(UART_XMIT_SIZE, GFP_KERNEL | GFP_DMA);
+ if (!s->rx_dma_buf)
+ goto err_out;
+
+ /* init for TX */
+ s->dma_channel = s->dma_channel_tx;
+ s->dma_data.chan_irq = s->dma_irq_tx;
+ s->tx_dma_chan = dma_request_channel(mask, mxs_auart_dma_filter, s);
+ if (!s->tx_dma_chan)
+ goto err_out;
+ s->tx_dma_buf = kzalloc(UART_XMIT_SIZE, GFP_KERNEL | GFP_DMA);
+ if (!s->tx_dma_buf)
+ goto err_out;
+
+ /* set the flags */
+ s->flags |= MXS_AUART_DMA_ENABLED;
+ dev_dbg(s->dev, "enabled the DMA support.");
+
+ return 0;
+
+err_out:
+ mxs_auart_dma_exit_channel(s);
+ return -EINVAL;
+
+}
+
static void mxs_auart_settermios(struct uart_port *u,
struct ktermios *termios,
struct ktermios *old)
{
+ struct mxs_auart_port *s = to_auart_port(u);
u32 bm, ctrl, ctrl2, div;
unsigned int cflag, baud;
@@ -362,10 +663,23 @@
ctrl |= AUART_LINECTRL_STP2;
/* figure out the hardware flow control settings */
- if (cflag & CRTSCTS)
+ if (cflag & CRTSCTS) {
+ /*
+ * The DMA has a bug(see errata:2836) in mx23.
+ * So we can not implement the DMA for auart in mx23,
+ * we can only implement the DMA support for auart
+ * in mx28.
+ */
+ if (is_imx28_auart(s) && (s->flags & MXS_AUART_DMA_CONFIG)) {
+ if (!mxs_auart_dma_init(s))
+ /* enable DMA tranfer */
+ ctrl2 |= AUART_CTRL2_TXDMAE | AUART_CTRL2_RXDMAE
+ | AUART_CTRL2_DMAONERR;
+ }
ctrl2 |= AUART_CTRL2_CTSEN | AUART_CTRL2_RTSEN;
- else
+ } else {
ctrl2 &= ~(AUART_CTRL2_CTSEN | AUART_CTRL2_RTSEN);
+ }
/* set baud rate */
baud = uart_get_baud_rate(u, termios, old, 0, u->uartclk);
@@ -377,6 +691,19 @@
writel(ctrl2, u->membase + AUART_CTRL2);
uart_update_timeout(u, termios->c_cflag, baud);
+
+ /* prepare for the DMA RX. */
+ if (auart_dma_enabled(s) &&
+ !test_and_set_bit(MXS_AUART_DMA_RX_READY, &s->flags)) {
+ if (!mxs_auart_dma_prep_rx(s)) {
+ /* Disable the normal RX interrupt. */
+ writel(AUART_INTR_RXIEN | AUART_INTR_RTIEN,
+ u->membase + AUART_INTR_CLR);
+ } else {
+ mxs_auart_dma_exit(s);
+ dev_err(s->dev, "We can not start up the DMA.\n");
+ }
+ }
}
static irqreturn_t mxs_auart_irq_handle(int irq, void *context)
@@ -395,7 +722,8 @@
}
if (istat & (AUART_INTR_RTIS | AUART_INTR_RXIS)) {
- mxs_auart_rx_chars(s);
+ if (!auart_dma_enabled(s))
+ mxs_auart_rx_chars(s);
istat &= ~(AUART_INTR_RTIS | AUART_INTR_RXIS);
}
@@ -455,6 +783,9 @@
{
struct mxs_auart_port *s = to_auart_port(u);
+ if (auart_dma_enabled(s))
+ mxs_auart_dma_exit(s);
+
writel(AUART_CTRL2_UARTEN, u->membase + AUART_CTRL2_CLR);
writel(AUART_INTR_RXIEN | AUART_INTR_RTIEN | AUART_INTR_CTSMIEN,
@@ -688,6 +1019,7 @@
struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
+ u32 dma_channel[2];
int ret;
if (!np)
@@ -701,11 +1033,27 @@
}
s->port.line = ret;
+ s->dma_irq_rx = platform_get_irq(pdev, 1);
+ s->dma_irq_tx = platform_get_irq(pdev, 2);
+
+ ret = of_property_read_u32_array(np, "fsl,auart-dma-channel",
+ dma_channel, 2);
+ if (ret == 0) {
+ s->dma_channel_rx = dma_channel[0];
+ s->dma_channel_tx = dma_channel[1];
+
+ s->flags |= MXS_AUART_DMA_CONFIG;
+ } else {
+ s->dma_channel_rx = -1;
+ s->dma_channel_tx = -1;
+ }
return 0;
}
-static int __devinit mxs_auart_probe(struct platform_device *pdev)
+static int mxs_auart_probe(struct platform_device *pdev)
{
+ const struct of_device_id *of_id =
+ of_match_device(mxs_auart_dt_ids, &pdev->dev);
struct mxs_auart_port *s;
u32 version;
int ret = 0;
@@ -730,6 +1078,11 @@
goto out_free;
}
+ if (of_id) {
+ pdev->id_entry = of_id->data;
+ s->devtype = pdev->id_entry->driver_data;
+ }
+
s->clk = clk_get(&pdev->dev, NULL);
if (IS_ERR(s->clk)) {
ret = PTR_ERR(s->clk);
@@ -751,7 +1104,6 @@
s->port.type = PORT_IMX;
s->port.dev = s->dev = get_device(&pdev->dev);
- s->flags = 0;
s->ctrl = 0;
s->irq = platform_get_irq(pdev, 0);
@@ -789,7 +1141,7 @@
return ret;
}
-static int __devexit mxs_auart_remove(struct platform_device *pdev)
+static int mxs_auart_remove(struct platform_device *pdev)
{
struct mxs_auart_port *s = platform_get_drvdata(pdev);
@@ -805,15 +1157,9 @@
return 0;
}
-static struct of_device_id mxs_auart_dt_ids[] = {
- { .compatible = "fsl,imx23-auart", },
- { /* sentinel */ }
-};
-MODULE_DEVICE_TABLE(of, mxs_auart_dt_ids);
-
static struct platform_driver mxs_auart_driver = {
.probe = mxs_auart_probe,
- .remove = __devexit_p(mxs_auart_remove),
+ .remove = mxs_auart_remove,
.driver = {
.name = "mxs-auart",
.owner = THIS_MODULE,
diff --git a/drivers/tty/serial/of_serial.c b/drivers/tty/serial/of_serial.c
index df443b9..e7cae1c 100644
--- a/drivers/tty/serial/of_serial.c
+++ b/drivers/tty/serial/of_serial.c
@@ -21,8 +21,10 @@
#include <linux/of_serial.h>
#include <linux/of_platform.h>
#include <linux/nwpserial.h>
+#include <linux/clk.h>
struct of_serial_info {
+ struct clk *clk;
int type;
int line;
};
@@ -50,8 +52,9 @@
/*
* Fill a struct uart_port for a given device node
*/
-static int __devinit of_platform_serial_setup(struct platform_device *ofdev,
- int type, struct uart_port *port)
+static int of_platform_serial_setup(struct platform_device *ofdev,
+ int type, struct uart_port *port,
+ struct of_serial_info *info)
{
struct resource resource;
struct device_node *np = ofdev->dev.of_node;
@@ -60,8 +63,17 @@
memset(port, 0, sizeof *port);
if (of_property_read_u32(np, "clock-frequency", &clk)) {
- dev_warn(&ofdev->dev, "no clock-frequency property set\n");
- return -ENODEV;
+
+ /* Get clk rate through clk driver if present */
+ info->clk = clk_get(&ofdev->dev, NULL);
+ if (IS_ERR(info->clk)) {
+ dev_warn(&ofdev->dev,
+ "clk or clock-frequency not defined\n");
+ return PTR_ERR(info->clk);
+ }
+
+ clk_prepare_enable(info->clk);
+ clk = clk_get_rate(info->clk);
}
/* If current-speed was set, then try not to change it. */
if (of_property_read_u32(np, "current-speed", &spd) == 0)
@@ -70,7 +82,7 @@
ret = of_address_to_resource(np, 0, &resource);
if (ret) {
dev_warn(&ofdev->dev, "invalid address\n");
- return ret;
+ goto out;
}
spin_lock_init(&port->lock);
@@ -97,7 +109,8 @@
default:
dev_warn(&ofdev->dev, "unsupported reg-io-width (%d)\n",
prop);
- return -EINVAL;
+ ret = -EINVAL;
+ goto out;
}
}
@@ -115,13 +128,17 @@
port->handle_break = tegra_serial_handle_break;
return 0;
+out:
+ if (info->clk)
+ clk_disable_unprepare(info->clk);
+ return ret;
}
/*
* Try to register a serial port
*/
static struct of_device_id of_platform_serial_table[];
-static int __devinit of_platform_serial_probe(struct platform_device *ofdev)
+static int of_platform_serial_probe(struct platform_device *ofdev)
{
const struct of_device_id *match;
struct of_serial_info *info;
@@ -141,7 +158,7 @@
return -ENOMEM;
port_type = (unsigned long)match->data;
- ret = of_platform_serial_setup(ofdev, port_type, &port);
+ ret = of_platform_serial_setup(ofdev, port_type, &port, info);
if (ret)
goto out;
@@ -204,6 +221,9 @@
/* need to add code for these */
break;
}
+
+ if (info->clk)
+ clk_disable_unprepare(info->clk);
kfree(info);
return 0;
}
@@ -211,7 +231,7 @@
/*
* A few common types, add more as needed.
*/
-static struct of_device_id __devinitdata of_platform_serial_table[] = {
+static struct of_device_id of_platform_serial_table[] = {
{ .compatible = "ns8250", .data = (void *)PORT_8250, },
{ .compatible = "ns16450", .data = (void *)PORT_16450, },
{ .compatible = "ns16550a", .data = (void *)PORT_16550A, },
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index 6d3d26a..b538e2e 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -96,7 +96,7 @@
unsigned char msr_saved_flags;
char name[20];
unsigned long port_activity;
- u32 context_loss_cnt;
+ int context_loss_cnt;
u32 errata;
u8 wakeups_enabled;
unsigned int irq_pending:1;
@@ -702,11 +702,7 @@
serial_out(up, UART_MCR, up->mcr | UART_MCR_TCRTLR);
serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
serial_out(up, UART_TI752_TCR, OMAP_UART_TCR_TRIG);
- /* Enable special char function UARTi.EFR_REG[5] and
- * load the new software flow control mode IXON or IXOFF
- * and restore the UARTi.EFR_REG[4] ENHANCED_EN value.
- */
- serial_out(up, UART_EFR, up->efr | UART_EFR_SCD);
+
serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A);
serial_out(up, UART_MCR, up->mcr & ~UART_MCR_TCRTLR);
@@ -1081,7 +1077,7 @@
#ifdef CONFIG_SERIAL_OMAP_CONSOLE
-static struct uart_omap_port *serial_omap_console_ports[4];
+static struct uart_omap_port *serial_omap_console_ports[OMAP_MAX_HSUART_PORTS];
static struct uart_driver serial_omap_reg;
@@ -1242,7 +1238,7 @@
}
#endif
-static void __devinit omap_serial_fill_features_erratas(struct uart_omap_port *up)
+static void omap_serial_fill_features_erratas(struct uart_omap_port *up)
{
u32 mvr, scheme;
u16 revision, major, minor;
@@ -1295,7 +1291,7 @@
}
}
-static __devinit struct omap_uart_port_info *of_get_uart_port_info(struct device *dev)
+static struct omap_uart_port_info *of_get_uart_port_info(struct device *dev)
{
struct omap_uart_port_info *omap_up_info;
@@ -1308,7 +1304,7 @@
return omap_up_info;
}
-static int __devinit serial_omap_probe(struct platform_device *pdev)
+static int serial_omap_probe(struct platform_device *pdev)
{
struct uart_omap_port *up;
struct resource *mem, *irq;
@@ -1445,7 +1441,7 @@
return ret;
}
-static int __devexit serial_omap_remove(struct platform_device *dev)
+static int serial_omap_remove(struct platform_device *dev)
{
struct uart_omap_port *up = platform_get_drvdata(dev);
@@ -1556,11 +1552,15 @@
{
struct uart_omap_port *up = dev_get_drvdata(dev);
- u32 loss_cnt = serial_omap_get_context_loss_count(up);
+ int loss_cnt = serial_omap_get_context_loss_count(up);
- if (up->context_loss_cnt != loss_cnt)
+ if (loss_cnt < 0) {
+ dev_err(dev, "serial_omap_get_context_loss_count failed : %d\n",
+ loss_cnt);
serial_omap_restore_context(up);
-
+ } else if (up->context_loss_cnt != loss_cnt) {
+ serial_omap_restore_context(up);
+ }
up->latency = up->calc_latency;
schedule_work(&up->qos_work);
@@ -1586,7 +1586,7 @@
static struct platform_driver serial_omap_driver = {
.probe = serial_omap_probe,
- .remove = __devexit_p(serial_omap_remove),
+ .remove = serial_omap_remove,
.driver = {
.name = DRIVER_NAME,
.pm = &serial_omap_dev_pm_ops,
diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c
index 4cd6c23..8318925 100644
--- a/drivers/tty/serial/pch_uart.c
+++ b/drivers/tty/serial/pch_uart.c
@@ -1839,7 +1839,7 @@
{0,},
};
-static int __devinit pch_uart_pci_probe(struct pci_dev *pdev,
+static int pch_uart_pci_probe(struct pci_dev *pdev,
const struct pci_device_id *id)
{
int ret;
@@ -1869,7 +1869,7 @@
.name = "pch_uart",
.id_table = pch_uart_pci_id,
.probe = pch_uart_pci_probe,
- .remove = __devexit_p(pch_uart_pci_remove),
+ .remove = pch_uart_pci_remove,
.suspend = pch_uart_pci_suspend,
.resume = pch_uart_pci_resume,
};
diff --git a/drivers/tty/serial/pxa.c b/drivers/tty/serial/pxa.c
index 9033fc6..2764828 100644
--- a/drivers/tty/serial/pxa.c
+++ b/drivers/tty/serial/pxa.c
@@ -705,6 +705,57 @@
clk_disable_unprepare(up->clk);
}
+#ifdef CONFIG_CONSOLE_POLL
+/*
+ * Console polling routines for writing and reading from the uart while
+ * in an interrupt or debug context.
+ */
+
+static int serial_pxa_get_poll_char(struct uart_port *port)
+{
+ struct uart_pxa_port *up = (struct uart_pxa_port *)port;
+ unsigned char lsr = serial_in(up, UART_LSR);
+
+ while (!(lsr & UART_LSR_DR))
+ lsr = serial_in(up, UART_LSR);
+
+ return serial_in(up, UART_RX);
+}
+
+
+static void serial_pxa_put_poll_char(struct uart_port *port,
+ unsigned char c)
+{
+ unsigned int ier;
+ struct uart_pxa_port *up = (struct uart_pxa_port *)port;
+
+ /*
+ * First save the IER then disable the interrupts
+ */
+ ier = serial_in(up, UART_IER);
+ serial_out(up, UART_IER, UART_IER_UUE);
+
+ wait_for_xmitr(up);
+ /*
+ * Send the character out.
+ * If a LF, also do CR...
+ */
+ serial_out(up, UART_TX, c);
+ if (c == 10) {
+ wait_for_xmitr(up);
+ serial_out(up, UART_TX, 13);
+ }
+
+ /*
+ * Finally, wait for transmitter to become empty
+ * and restore the IER
+ */
+ wait_for_xmitr(up);
+ serial_out(up, UART_IER, ier);
+}
+
+#endif /* CONFIG_CONSOLE_POLL */
+
static int __init
serial_pxa_console_setup(struct console *co, char *options)
{
@@ -759,6 +810,10 @@
.request_port = serial_pxa_request_port,
.config_port = serial_pxa_config_port,
.verify_port = serial_pxa_verify_port,
+#ifdef CONFIG_CONSOLE_POLL
+ .poll_get_char = serial_pxa_get_poll_char,
+ .poll_put_char = serial_pxa_put_poll_char,
+#endif
};
static struct uart_driver serial_pxa_reg = {
diff --git a/drivers/tty/serial/sa1100.c b/drivers/tty/serial/sa1100.c
index 2ca5959..da56c8a 100644
--- a/drivers/tty/serial/sa1100.c
+++ b/drivers/tty/serial/sa1100.c
@@ -637,7 +637,7 @@
PPSR |= PPC_TXD1 | PPC_TXD3;
}
-void __devinit sa1100_register_uart_fns(struct sa1100_port_fns *fns)
+void sa1100_register_uart_fns(struct sa1100_port_fns *fns)
{
if (fns->get_mctrl)
sa1100_pops.get_mctrl = fns->get_mctrl;
diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
index 7f04717..fb0e0f0 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -223,8 +223,11 @@
struct uart_port *port = &ourport->port;
struct tty_struct *tty = port->state->port.tty;
unsigned int ufcon, ch, flag, ufstat, uerstat;
+ unsigned long flags;
int max_count = 64;
+ spin_lock_irqsave(&port->lock, flags);
+
while (max_count-- > 0) {
ufcon = rd_regl(port, S3C2410_UFCON);
ufstat = rd_regl(port, S3C2410_UFSTAT);
@@ -299,6 +302,7 @@
tty_flip_buffer_push(tty);
out:
+ spin_unlock_irqrestore(&port->lock, flags);
return IRQ_HANDLED;
}
@@ -307,8 +311,11 @@
struct s3c24xx_uart_port *ourport = id;
struct uart_port *port = &ourport->port;
struct circ_buf *xmit = &port->state->xmit;
+ unsigned long flags;
int count = 256;
+ spin_lock_irqsave(&port->lock, flags);
+
if (port->x_char) {
wr_regb(port, S3C2410_UTXH, port->x_char);
port->icount.tx++;
@@ -336,13 +343,17 @@
port->icount.tx++;
}
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) {
+ spin_unlock(&port->lock);
uart_write_wakeup(port);
+ spin_lock(&port->lock);
+ }
if (uart_circ_empty(xmit))
s3c24xx_serial_stop_tx(port);
out:
+ spin_unlock_irqrestore(&port->lock, flags);
return IRQ_HANDLED;
}
@@ -352,10 +363,8 @@
struct s3c24xx_uart_port *ourport = id;
struct uart_port *port = &ourport->port;
unsigned int pend = rd_regl(port, S3C64XX_UINTP);
- unsigned long flags;
irqreturn_t ret = IRQ_HANDLED;
- spin_lock_irqsave(&port->lock, flags);
if (pend & S3C64XX_UINTM_RXD_MSK) {
ret = s3c24xx_serial_rx_chars(irq, id);
wr_regl(port, S3C64XX_UINTP, S3C64XX_UINTM_RXD_MSK);
@@ -364,7 +373,6 @@
ret = s3c24xx_serial_tx_chars(irq, id);
wr_regl(port, S3C64XX_UINTP, S3C64XX_UINTM_TXD_MSK);
}
- spin_unlock_irqrestore(&port->lock, flags);
return ret;
}
@@ -530,16 +538,16 @@
switch (level) {
case 3:
if (!IS_ERR(ourport->baudclk))
- clk_disable(ourport->baudclk);
+ clk_disable_unprepare(ourport->baudclk);
- clk_disable(ourport->clk);
+ clk_disable_unprepare(ourport->clk);
break;
case 0:
- clk_enable(ourport->clk);
+ clk_prepare_enable(ourport->clk);
if (!IS_ERR(ourport->baudclk))
- clk_enable(ourport->baudclk);
+ clk_prepare_enable(ourport->baudclk);
break;
default:
@@ -713,11 +721,11 @@
s3c24xx_serial_setsource(port, clk_sel);
if (!IS_ERR(ourport->baudclk)) {
- clk_disable(ourport->baudclk);
+ clk_disable_unprepare(ourport->baudclk);
ourport->baudclk = ERR_PTR(-EINVAL);
}
- clk_enable(clk);
+ clk_prepare_enable(clk);
ourport->baudclk = clk;
ourport->baudclk_rate = clk ? clk_get_rate(clk) : 0;
@@ -1256,7 +1264,7 @@
return ret;
}
-static int __devexit s3c24xx_serial_remove(struct platform_device *dev)
+static int s3c24xx_serial_remove(struct platform_device *dev)
{
struct uart_port *port = s3c24xx_dev_to_port(&dev->dev);
@@ -1287,9 +1295,9 @@
struct s3c24xx_uart_port *ourport = to_ourport(port);
if (port) {
- clk_enable(ourport->clk);
+ clk_prepare_enable(ourport->clk);
s3c24xx_serial_resetport(port, s3c24xx_port_to_cfg(port));
- clk_disable(ourport->clk);
+ clk_disable_unprepare(ourport->clk);
uart_resume_port(&s3c24xx_uart_drv, port);
}
@@ -1701,6 +1709,16 @@
#ifdef CONFIG_OF
static const struct of_device_id s3c24xx_uart_dt_match[] = {
+ { .compatible = "samsung,s3c2410-uart",
+ .data = (void *)S3C2410_SERIAL_DRV_DATA },
+ { .compatible = "samsung,s3c2412-uart",
+ .data = (void *)S3C2412_SERIAL_DRV_DATA },
+ { .compatible = "samsung,s3c2440-uart",
+ .data = (void *)S3C2440_SERIAL_DRV_DATA },
+ { .compatible = "samsung,s3c6400-uart",
+ .data = (void *)S3C6400_SERIAL_DRV_DATA },
+ { .compatible = "samsung,s5pv210-uart",
+ .data = (void *)S5PV210_SERIAL_DRV_DATA },
{ .compatible = "samsung,exynos4210-uart",
.data = (void *)EXYNOS4210_SERIAL_DRV_DATA },
{},
@@ -1712,7 +1730,7 @@
static struct platform_driver samsung_serial_driver = {
.probe = s3c24xx_serial_probe,
- .remove = __devexit_p(s3c24xx_serial_remove),
+ .remove = s3c24xx_serial_remove,
.id_table = s3c24xx_serial_driver_ids,
.driver = {
.name = "samsung-uart",
diff --git a/drivers/tty/serial/sc26xx.c b/drivers/tty/serial/sc26xx.c
index 9d66424..aced1dd 100644
--- a/drivers/tty/serial/sc26xx.c
+++ b/drivers/tty/serial/sc26xx.c
@@ -621,7 +621,7 @@
return bit ? (1 << (bit - 1)) : 0;
}
-static void __devinit sc26xx_init_masks(struct uart_sc26xx_port *up,
+static void sc26xx_init_masks(struct uart_sc26xx_port *up,
int line, unsigned int data)
{
up->dtr_mask[line] = sc26xx_flags2mask(data, 0);
@@ -632,7 +632,7 @@
up->ri_mask[line] = sc26xx_flags2mask(data, 20);
}
-static int __devinit sc26xx_probe(struct platform_device *dev)
+static int sc26xx_probe(struct platform_device *dev)
{
struct resource *res;
struct uart_sc26xx_port *up;
@@ -733,7 +733,7 @@
static struct platform_driver sc26xx_driver = {
.probe = sc26xx_probe,
- .remove = __devexit_p(sc26xx_driver_remove),
+ .remove = sc26xx_driver_remove,
.driver = {
.name = "SC26xx",
.owner = THIS_MODULE,
diff --git a/drivers/tty/serial/sccnxp.c b/drivers/tty/serial/sccnxp.c
index e821068..418b495 100644
--- a/drivers/tty/serial/sccnxp.c
+++ b/drivers/tty/serial/sccnxp.c
@@ -740,7 +740,7 @@
}
#endif
-static int __devinit sccnxp_probe(struct platform_device *pdev)
+static int sccnxp_probe(struct platform_device *pdev)
{
struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
int chiptype = pdev->id_entry->driver_data;
@@ -943,7 +943,7 @@
return ret;
}
-static int __devexit sccnxp_remove(struct platform_device *pdev)
+static int sccnxp_remove(struct platform_device *pdev)
{
int i;
struct sccnxp_port *s = platform_get_drvdata(pdev);
@@ -981,7 +981,7 @@
.owner = THIS_MODULE,
},
.probe = sccnxp_probe,
- .remove = __devexit_p(sccnxp_remove),
+ .remove = sccnxp_remove,
.id_table = sccnxp_id_table,
};
module_platform_driver(sccnxp_uart_driver);
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index 0fcfd98..fb5aa42 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -634,10 +634,10 @@
uart_set_mctrl(port, TIOCM_RTS);
}
-static void uart_get_info(struct tty_port *port,
- struct uart_state *state,
+static void do_uart_get_info(struct tty_port *port,
struct serial_struct *retinfo)
{
+ struct uart_state *state = container_of(port, struct uart_state, port);
struct uart_port *uport = state->uart_port;
memset(retinfo, 0, sizeof(*retinfo));
@@ -662,17 +662,21 @@
retinfo->iomem_base = (void *)(unsigned long)uport->mapbase;
}
-static int uart_get_info_user(struct uart_state *state,
- struct serial_struct __user *retinfo)
+static void uart_get_info(struct tty_port *port,
+ struct serial_struct *retinfo)
{
- struct tty_port *port = &state->port;
- struct serial_struct tmp;
-
/* Ensure the state we copy is consistent and no hardware changes
occur as we go */
mutex_lock(&port->mutex);
- uart_get_info(port, state, &tmp);
+ do_uart_get_info(port, retinfo);
mutex_unlock(&port->mutex);
+}
+
+static int uart_get_info_user(struct tty_port *port,
+ struct serial_struct __user *retinfo)
+{
+ struct serial_struct tmp;
+ uart_get_info(port, &tmp);
if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
return -EFAULT;
@@ -1131,7 +1135,7 @@
*/
switch (cmd) {
case TIOCGSERIAL:
- ret = uart_get_info_user(state, uarg);
+ ret = uart_get_info_user(port, uarg);
break;
case TIOCSSERIAL:
@@ -2293,6 +2297,8 @@
if (retval >= 0)
return retval;
+ for (i = 0; i < drv->nr; i++)
+ tty_port_destroy(&drv->state[i].port);
put_tty_driver(normal);
out_kfree:
kfree(drv->state);
@@ -2312,8 +2318,12 @@
void uart_unregister_driver(struct uart_driver *drv)
{
struct tty_driver *p = drv->tty_driver;
+ unsigned int i;
+
tty_unregister_driver(p);
put_tty_driver(p);
+ for (i = 0; i < drv->nr; i++)
+ tty_port_destroy(&drv->state[i].port);
kfree(drv->state);
drv->state = NULL;
drv->tty_driver = NULL;
@@ -2329,21 +2339,166 @@
static ssize_t uart_get_attr_uartclk(struct device *dev,
struct device_attribute *attr, char *buf)
{
- int ret;
+ struct serial_struct tmp;
struct tty_port *port = dev_get_drvdata(dev);
- struct uart_state *state = container_of(port, struct uart_state, port);
- mutex_lock(&state->port.mutex);
- ret = snprintf(buf, PAGE_SIZE, "%d\n", state->uart_port->uartclk);
- mutex_unlock(&state->port.mutex);
-
- return ret;
+ uart_get_info(port, &tmp);
+ return snprintf(buf, PAGE_SIZE, "%d\n", tmp.baud_base * 16);
}
+static ssize_t uart_get_attr_type(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct serial_struct tmp;
+ struct tty_port *port = dev_get_drvdata(dev);
+
+ uart_get_info(port, &tmp);
+ return snprintf(buf, PAGE_SIZE, "%d\n", tmp.type);
+}
+static ssize_t uart_get_attr_line(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct serial_struct tmp;
+ struct tty_port *port = dev_get_drvdata(dev);
+
+ uart_get_info(port, &tmp);
+ return snprintf(buf, PAGE_SIZE, "%d\n", tmp.line);
+}
+
+static ssize_t uart_get_attr_port(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct serial_struct tmp;
+ struct tty_port *port = dev_get_drvdata(dev);
+ unsigned long ioaddr;
+
+ uart_get_info(port, &tmp);
+ ioaddr = tmp.port;
+ if (HIGH_BITS_OFFSET)
+ ioaddr |= (unsigned long)tmp.port_high << HIGH_BITS_OFFSET;
+ return snprintf(buf, PAGE_SIZE, "0x%lX\n", ioaddr);
+}
+
+static ssize_t uart_get_attr_irq(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct serial_struct tmp;
+ struct tty_port *port = dev_get_drvdata(dev);
+
+ uart_get_info(port, &tmp);
+ return snprintf(buf, PAGE_SIZE, "%d\n", tmp.irq);
+}
+
+static ssize_t uart_get_attr_flags(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct serial_struct tmp;
+ struct tty_port *port = dev_get_drvdata(dev);
+
+ uart_get_info(port, &tmp);
+ return snprintf(buf, PAGE_SIZE, "0x%X\n", tmp.flags);
+}
+
+static ssize_t uart_get_attr_xmit_fifo_size(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct serial_struct tmp;
+ struct tty_port *port = dev_get_drvdata(dev);
+
+ uart_get_info(port, &tmp);
+ return snprintf(buf, PAGE_SIZE, "%d\n", tmp.xmit_fifo_size);
+}
+
+
+static ssize_t uart_get_attr_close_delay(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct serial_struct tmp;
+ struct tty_port *port = dev_get_drvdata(dev);
+
+ uart_get_info(port, &tmp);
+ return snprintf(buf, PAGE_SIZE, "%d\n", tmp.close_delay);
+}
+
+
+static ssize_t uart_get_attr_closing_wait(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct serial_struct tmp;
+ struct tty_port *port = dev_get_drvdata(dev);
+
+ uart_get_info(port, &tmp);
+ return snprintf(buf, PAGE_SIZE, "%d\n", tmp.closing_wait);
+}
+
+static ssize_t uart_get_attr_custom_divisor(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct serial_struct tmp;
+ struct tty_port *port = dev_get_drvdata(dev);
+
+ uart_get_info(port, &tmp);
+ return snprintf(buf, PAGE_SIZE, "%d\n", tmp.custom_divisor);
+}
+
+static ssize_t uart_get_attr_io_type(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct serial_struct tmp;
+ struct tty_port *port = dev_get_drvdata(dev);
+
+ uart_get_info(port, &tmp);
+ return snprintf(buf, PAGE_SIZE, "%d\n", tmp.io_type);
+}
+
+static ssize_t uart_get_attr_iomem_base(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct serial_struct tmp;
+ struct tty_port *port = dev_get_drvdata(dev);
+
+ uart_get_info(port, &tmp);
+ return snprintf(buf, PAGE_SIZE, "0x%lX\n", (unsigned long)tmp.iomem_base);
+}
+
+static ssize_t uart_get_attr_iomem_reg_shift(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct serial_struct tmp;
+ struct tty_port *port = dev_get_drvdata(dev);
+
+ uart_get_info(port, &tmp);
+ return snprintf(buf, PAGE_SIZE, "%d\n", tmp.iomem_reg_shift);
+}
+
+static DEVICE_ATTR(type, S_IRUSR | S_IRGRP, uart_get_attr_type, NULL);
+static DEVICE_ATTR(line, S_IRUSR | S_IRGRP, uart_get_attr_line, NULL);
+static DEVICE_ATTR(port, S_IRUSR | S_IRGRP, uart_get_attr_port, NULL);
+static DEVICE_ATTR(irq, S_IRUSR | S_IRGRP, uart_get_attr_irq, NULL);
+static DEVICE_ATTR(flags, S_IRUSR | S_IRGRP, uart_get_attr_flags, NULL);
+static DEVICE_ATTR(xmit_fifo_size, S_IRUSR | S_IRGRP, uart_get_attr_xmit_fifo_size, NULL);
static DEVICE_ATTR(uartclk, S_IRUSR | S_IRGRP, uart_get_attr_uartclk, NULL);
+static DEVICE_ATTR(close_delay, S_IRUSR | S_IRGRP, uart_get_attr_close_delay, NULL);
+static DEVICE_ATTR(closing_wait, S_IRUSR | S_IRGRP, uart_get_attr_closing_wait, NULL);
+static DEVICE_ATTR(custom_divisor, S_IRUSR | S_IRGRP, uart_get_attr_custom_divisor, NULL);
+static DEVICE_ATTR(io_type, S_IRUSR | S_IRGRP, uart_get_attr_io_type, NULL);
+static DEVICE_ATTR(iomem_base, S_IRUSR | S_IRGRP, uart_get_attr_iomem_base, NULL);
+static DEVICE_ATTR(iomem_reg_shift, S_IRUSR | S_IRGRP, uart_get_attr_iomem_reg_shift, NULL);
static struct attribute *tty_dev_attrs[] = {
+ &dev_attr_type.attr,
+ &dev_attr_line.attr,
+ &dev_attr_port.attr,
+ &dev_attr_irq.attr,
+ &dev_attr_flags.attr,
+ &dev_attr_xmit_fifo_size.attr,
&dev_attr_uartclk.attr,
+ &dev_attr_close_delay.attr,
+ &dev_attr_closing_wait.attr,
+ &dev_attr_custom_divisor.attr,
+ &dev_attr_io_type.attr,
+ &dev_attr_iomem_base.attr,
+ &dev_attr_iomem_reg_shift.attr,
NULL,
};
@@ -2356,6 +2511,7 @@
NULL
};
+
/**
* uart_add_one_port - attach a driver-defined port structure
* @drv: pointer to the uart low level driver structure for this port
diff --git a/drivers/tty/serial/serial_txx9.c b/drivers/tty/serial/serial_txx9.c
index 6ae2a58..b52b21a 100644
--- a/drivers/tty/serial/serial_txx9.c
+++ b/drivers/tty/serial/serial_txx9.c
@@ -1030,7 +1030,7 @@
*
* On success the port is ready to use and the line number is returned.
*/
-static int __devinit serial_txx9_register_port(struct uart_port *port)
+static int serial_txx9_register_port(struct uart_port *port)
{
int i;
struct uart_txx9_port *uart;
@@ -1078,7 +1078,7 @@
* Remove one serial port. This may not be called from interrupt
* context. We hand the port back to the our control.
*/
-static void __devexit serial_txx9_unregister_port(int line)
+static void serial_txx9_unregister_port(int line)
{
struct uart_txx9_port *uart = &serial_txx9_ports[line];
@@ -1096,7 +1096,7 @@
/*
* Register a set of serial devices attached to a platform device.
*/
-static int __devinit serial_txx9_probe(struct platform_device *dev)
+static int serial_txx9_probe(struct platform_device *dev)
{
struct uart_port *p = dev->dev.platform_data;
struct uart_port port;
@@ -1126,7 +1126,7 @@
/*
* Remove serial ports registered against a platform device.
*/
-static int __devexit serial_txx9_remove(struct platform_device *dev)
+static int serial_txx9_remove(struct platform_device *dev)
{
int i;
@@ -1171,7 +1171,7 @@
static struct platform_driver serial_txx9_plat_driver = {
.probe = serial_txx9_probe,
- .remove = __devexit_p(serial_txx9_remove),
+ .remove = serial_txx9_remove,
#ifdef CONFIG_PM
.suspend = serial_txx9_suspend,
.resume = serial_txx9_resume,
@@ -1187,7 +1187,7 @@
* Probe one serial board. Unfortunately, there is no rhyme nor reason
* to the arrangement of serial ports on a PCI card.
*/
-static int __devinit
+static int
pciserial_txx9_init_one(struct pci_dev *dev, const struct pci_device_id *ent)
{
struct uart_port port;
@@ -1217,7 +1217,7 @@
return 0;
}
-static void __devexit pciserial_txx9_remove_one(struct pci_dev *dev)
+static void pciserial_txx9_remove_one(struct pci_dev *dev)
{
struct uart_txx9_port *up = pci_get_drvdata(dev);
@@ -1261,7 +1261,7 @@
static struct pci_driver serial_txx9_pci_driver = {
.name = "serial_txx9",
.probe = pciserial_txx9_init_one,
- .remove = __devexit_p(pciserial_txx9_remove_one),
+ .remove = pciserial_txx9_remove_one,
#ifdef CONFIG_PM
.suspend = pciserial_txx9_suspend_one,
.resume = pciserial_txx9_resume_one,
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index 6ee5900..6147756 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -99,12 +99,6 @@
#endif
struct notifier_block freq_transition;
-
-#ifdef CONFIG_SERIAL_SH_SCI_CONSOLE
- unsigned short saved_smr;
- unsigned short saved_fcr;
- unsigned char saved_brr;
-#endif
};
/* Function prototypes */
@@ -202,9 +196,9 @@
[SCxSR] = { 0x14, 16 },
[SCxRDR] = { 0x60, 8 },
[SCFCR] = { 0x18, 16 },
- [SCFDR] = { 0x1c, 16 },
- [SCTFDR] = sci_reg_invalid,
- [SCRFDR] = sci_reg_invalid,
+ [SCFDR] = sci_reg_invalid,
+ [SCTFDR] = { 0x38, 16 },
+ [SCRFDR] = { 0x3c, 16 },
[SCSPTR] = sci_reg_invalid,
[SCLSR] = sci_reg_invalid,
},
@@ -491,7 +485,7 @@
reg = sci_getreg(port, SCTFDR);
if (reg->size)
- return serial_port_in(port, SCTFDR) & 0xff;
+ return serial_port_in(port, SCTFDR) & ((port->fifosize << 1) - 1);
reg = sci_getreg(port, SCFDR);
if (reg->size)
@@ -511,7 +505,7 @@
reg = sci_getreg(port, SCRFDR);
if (reg->size)
- return serial_port_in(port, SCRFDR) & 0xff;
+ return serial_port_in(port, SCRFDR) & ((port->fifosize << 1) - 1);
reg = sci_getreg(port, SCFDR);
if (reg->size)
@@ -1132,7 +1126,7 @@
return sci_gpio_names[index];
}
-static void __devinit sci_init_gpios(struct sci_port *port)
+static void sci_init_gpios(struct sci_port *port)
{
struct uart_port *up = &port->port;
int i;
@@ -1749,22 +1743,21 @@
static int sci_startup(struct uart_port *port)
{
struct sci_port *s = to_sci_port(port);
+ unsigned long flags;
int ret;
dev_dbg(port->dev, "%s(%d)\n", __func__, port->line);
- pm_runtime_put_noidle(port->dev);
-
- sci_port_enable(s);
-
ret = sci_request_irq(s);
if (unlikely(ret < 0))
return ret;
sci_request_dma(port);
+ spin_lock_irqsave(&port->lock, flags);
sci_start_tx(port);
sci_start_rx(port);
+ spin_unlock_irqrestore(&port->lock, flags);
return 0;
}
@@ -1772,18 +1765,17 @@
static void sci_shutdown(struct uart_port *port)
{
struct sci_port *s = to_sci_port(port);
+ unsigned long flags;
dev_dbg(port->dev, "%s(%d)\n", __func__, port->line);
+ spin_lock_irqsave(&port->lock, flags);
sci_stop_rx(port);
sci_stop_tx(port);
+ spin_unlock_irqrestore(&port->lock, flags);
sci_free_dma(port);
sci_free_irq(s);
-
- sci_port_disable(s);
-
- pm_runtime_get_noresume(port->dev);
}
static unsigned int sci_scbrr_calc(unsigned int algo_id, unsigned int bps,
@@ -1829,7 +1821,7 @@
{
struct sci_port *s = to_sci_port(port);
struct plat_sci_reg *reg;
- unsigned int baud, smr_val, max_baud;
+ unsigned int baud, smr_val, max_baud, cks;
int t = -1;
/*
@@ -1863,21 +1855,18 @@
uart_update_timeout(port, termios->c_cflag, baud);
- serial_port_out(port, SCSMR, smr_val);
+ for (cks = 0; t >= 256 && cks <= 3; cks++)
+ t >>= 2;
- dev_dbg(port->dev, "%s: SMR %x, t %x, SCSCR %x\n", __func__, smr_val, t,
- s->cfg->scscr);
+ dev_dbg(port->dev, "%s: SMR %x, cks %x, t %x, SCSCR %x\n",
+ __func__, smr_val, cks, t, s->cfg->scscr);
- if (t > 0) {
- if (t >= 256) {
- serial_port_out(port, SCSMR, (serial_port_in(port, SCSMR) & ~3) | 1);
- t >>= 2;
- } else
- serial_port_out(port, SCSMR, serial_port_in(port, SCSMR) & ~3);
-
+ if (t >= 0) {
+ serial_port_out(port, SCSMR, (smr_val & ~3) | cks);
serial_port_out(port, SCBRR, t);
udelay((1000000+(baud-1)) / baud); /* Wait one bit interval */
- }
+ } else
+ serial_port_out(port, SCSMR, smr_val);
sci_init_pins(port, termios->c_cflag);
@@ -1932,6 +1921,21 @@
sci_port_disable(s);
}
+static void sci_pm(struct uart_port *port, unsigned int state,
+ unsigned int oldstate)
+{
+ struct sci_port *sci_port = to_sci_port(port);
+
+ switch (state) {
+ case 3:
+ sci_port_disable(sci_port);
+ break;
+ default:
+ sci_port_enable(sci_port);
+ break;
+ }
+}
+
static const char *sci_type(struct uart_port *port)
{
switch (port->type) {
@@ -2053,6 +2057,7 @@
.startup = sci_startup,
.shutdown = sci_shutdown,
.set_termios = sci_set_termios,
+ .pm = sci_pm,
.type = sci_type,
.release_port = sci_release_port,
.request_port = sci_request_port,
@@ -2064,7 +2069,7 @@
#endif
};
-static int __devinit sci_init_single(struct platform_device *dev,
+static int sci_init_single(struct platform_device *dev,
struct sci_port *sci_port,
unsigned int index,
struct plat_sci_port *p)
@@ -2121,8 +2126,6 @@
sci_init_gpios(sci_port);
- pm_runtime_irq_safe(&dev->dev);
- pm_runtime_get_noresume(&dev->dev);
pm_runtime_enable(&dev->dev);
}
@@ -2206,9 +2209,21 @@
{
struct sci_port *sci_port = &sci_ports[co->index];
struct uart_port *port = &sci_port->port;
- unsigned short bits;
+ unsigned short bits, ctrl;
+ unsigned long flags;
+ int locked = 1;
- sci_port_enable(sci_port);
+ local_irq_save(flags);
+ if (port->sysrq)
+ locked = 0;
+ else if (oops_in_progress)
+ locked = spin_trylock(&port->lock);
+ else
+ spin_lock(&port->lock);
+
+ /* first save the SCSCR then disable the interrupts */
+ ctrl = serial_port_in(port, SCSCR);
+ serial_port_out(port, SCSCR, sci_port->cfg->scscr);
uart_console_write(port, s, count, serial_console_putchar);
@@ -2217,10 +2232,15 @@
while ((serial_port_in(port, SCxSR) & bits) != bits)
cpu_relax();
- sci_port_disable(sci_port);
+ /* restore the SCSCR */
+ serial_port_out(port, SCSCR, ctrl);
+
+ if (locked)
+ spin_unlock(&port->lock);
+ local_irq_restore(flags);
}
-static int __devinit serial_console_setup(struct console *co, char *options)
+static int serial_console_setup(struct console *co, char *options)
{
struct sci_port *sci_port;
struct uart_port *port;
@@ -2249,13 +2269,9 @@
if (unlikely(ret != 0))
return ret;
- sci_port_enable(sci_port);
-
if (options)
uart_parse_options(options, &baud, &parity, &bits, &flow);
- sci_port_disable(sci_port);
-
return uart_set_options(port, co, baud, parity, bits, flow);
}
@@ -2278,7 +2294,7 @@
static char early_serial_buf[32];
-static int __devinit sci_probe_earlyprintk(struct platform_device *pdev)
+static int sci_probe_earlyprintk(struct platform_device *pdev)
{
struct plat_sci_port *cfg = pdev->dev.platform_data;
@@ -2298,57 +2314,15 @@
return 0;
}
-#define uart_console(port) ((port)->cons->index == (port)->line)
-
-static int sci_runtime_suspend(struct device *dev)
-{
- struct sci_port *sci_port = dev_get_drvdata(dev);
- struct uart_port *port = &sci_port->port;
-
- if (uart_console(port)) {
- struct plat_sci_reg *reg;
-
- sci_port->saved_smr = serial_port_in(port, SCSMR);
- sci_port->saved_brr = serial_port_in(port, SCBRR);
-
- reg = sci_getreg(port, SCFCR);
- if (reg->size)
- sci_port->saved_fcr = serial_port_in(port, SCFCR);
- else
- sci_port->saved_fcr = 0;
- }
- return 0;
-}
-
-static int sci_runtime_resume(struct device *dev)
-{
- struct sci_port *sci_port = dev_get_drvdata(dev);
- struct uart_port *port = &sci_port->port;
-
- if (uart_console(port)) {
- sci_reset(port);
- serial_port_out(port, SCSMR, sci_port->saved_smr);
- serial_port_out(port, SCBRR, sci_port->saved_brr);
-
- if (sci_port->saved_fcr)
- serial_port_out(port, SCFCR, sci_port->saved_fcr);
-
- serial_port_out(port, SCSCR, sci_port->cfg->scscr);
- }
- return 0;
-}
-
#define SCI_CONSOLE (&serial_console)
#else
-static inline int __devinit sci_probe_earlyprintk(struct platform_device *pdev)
+static inline int sci_probe_earlyprintk(struct platform_device *pdev)
{
return -EINVAL;
}
#define SCI_CONSOLE NULL
-#define sci_runtime_suspend NULL
-#define sci_runtime_resume NULL
#endif /* CONFIG_SERIAL_SH_SCI_CONSOLE */
@@ -2379,7 +2353,7 @@
return 0;
}
-static int __devinit sci_probe_single(struct platform_device *dev,
+static int sci_probe_single(struct platform_device *dev,
unsigned int index,
struct plat_sci_port *p,
struct sci_port *sciport)
@@ -2409,7 +2383,7 @@
return 0;
}
-static int __devinit sci_probe(struct platform_device *dev)
+static int sci_probe(struct platform_device *dev)
{
struct plat_sci_port *p = dev->dev.platform_data;
struct sci_port *sp = &sci_ports[dev->id];
@@ -2466,8 +2440,6 @@
}
static const struct dev_pm_ops sci_dev_pm_ops = {
- .runtime_suspend = sci_runtime_suspend,
- .runtime_resume = sci_runtime_resume,
.suspend = sci_suspend,
.resume = sci_resume,
};
diff --git a/drivers/tty/serial/sirfsoc_uart.c b/drivers/tty/serial/sirfsoc_uart.c
index a9e2bd1..5da5cb9 100644
--- a/drivers/tty/serial/sirfsoc_uart.c
+++ b/drivers/tty/serial/sirfsoc_uart.c
@@ -727,7 +727,7 @@
return 0;
}
-static struct of_device_id sirfsoc_uart_ids[] __devinitdata = {
+static struct of_device_id sirfsoc_uart_ids[] = {
{ .compatible = "sirf,prima2-uart", },
{}
};
@@ -735,7 +735,7 @@
static struct platform_driver sirfsoc_uart_driver = {
.probe = sirfsoc_uart_probe,
- .remove = __devexit_p(sirfsoc_uart_remove),
+ .remove = sirfsoc_uart_remove,
.suspend = sirfsoc_uart_suspend,
.resume = sirfsoc_uart_resume,
.driver = {
diff --git a/drivers/tty/serial/sunhv.c b/drivers/tty/serial/sunhv.c
index 505961c..b9bf9c5 100644
--- a/drivers/tty/serial/sunhv.c
+++ b/drivers/tty/serial/sunhv.c
@@ -519,7 +519,7 @@
.data = &sunhv_reg,
};
-static int __devinit hv_probe(struct platform_device *op)
+static int hv_probe(struct platform_device *op)
{
struct uart_port *port;
unsigned long minor;
@@ -598,7 +598,7 @@
return err;
}
-static int __devexit hv_remove(struct platform_device *dev)
+static int hv_remove(struct platform_device *dev)
{
struct uart_port *port = dev_get_drvdata(&dev->dev);
@@ -636,7 +636,7 @@
.of_match_table = hv_match,
},
.probe = hv_probe,
- .remove = __devexit_p(hv_remove),
+ .remove = hv_remove,
};
static int __init sunhv_init(void)
diff --git a/drivers/tty/serial/sunsab.c b/drivers/tty/serial/sunsab.c
index f0d93eb..bd8b3b6 100644
--- a/drivers/tty/serial/sunsab.c
+++ b/drivers/tty/serial/sunsab.c
@@ -954,7 +954,7 @@
#define sunsab_console_init() do { } while (0)
#endif
-static int __devinit sunsab_init_one(struct uart_sunsab_port *up,
+static int sunsab_init_one(struct uart_sunsab_port *up,
struct platform_device *op,
unsigned long offset,
int line)
@@ -1007,7 +1007,7 @@
return 0;
}
-static int __devinit sab_probe(struct platform_device *op)
+static int sab_probe(struct platform_device *op)
{
static int inst;
struct uart_sunsab_port *up;
@@ -1063,7 +1063,7 @@
return err;
}
-static int __devexit sab_remove(struct platform_device *op)
+static int sab_remove(struct platform_device *op)
{
struct uart_sunsab_port *up = dev_get_drvdata(&op->dev);
@@ -1100,7 +1100,7 @@
.of_match_table = sab_match,
},
.probe = sab_probe,
- .remove = __devexit_p(sab_remove),
+ .remove = sab_remove,
};
static int __init sunsab_init(void)
diff --git a/drivers/tty/serial/sunsu.c b/drivers/tty/serial/sunsu.c
index b97913d..220da3f 100644
--- a/drivers/tty/serial/sunsu.c
+++ b/drivers/tty/serial/sunsu.c
@@ -1185,7 +1185,7 @@
.major = TTY_MAJOR,
};
-static int __devinit sunsu_kbd_ms_init(struct uart_sunsu_port *up)
+static int sunsu_kbd_ms_init(struct uart_sunsu_port *up)
{
int quot, baud;
#ifdef CONFIG_SERIO
@@ -1391,7 +1391,7 @@
#define sunsu_serial_console_init() do { } while (0)
#endif
-static enum su_type __devinit su_get_type(struct device_node *dp)
+static enum su_type su_get_type(struct device_node *dp)
{
struct device_node *ap = of_find_node_by_path("/aliases");
@@ -1412,7 +1412,7 @@
return SU_PORT_PORT;
}
-static int __devinit su_probe(struct platform_device *op)
+static int su_probe(struct platform_device *op)
{
static int inst;
struct device_node *dp = op->dev.of_node;
@@ -1503,7 +1503,7 @@
return err;
}
-static int __devexit su_remove(struct platform_device *op)
+static int su_remove(struct platform_device *op)
{
struct uart_sunsu_port *up = dev_get_drvdata(&op->dev);
bool kbdms = false;
@@ -1556,7 +1556,7 @@
.of_match_table = su_match,
},
.probe = su_probe,
- .remove = __devexit_p(su_remove),
+ .remove = su_remove,
};
static int __init sunsu_init(void)
diff --git a/drivers/tty/serial/sunzilog.c b/drivers/tty/serial/sunzilog.c
index babd947..aef4fab 100644
--- a/drivers/tty/serial/sunzilog.c
+++ b/drivers/tty/serial/sunzilog.c
@@ -1282,7 +1282,7 @@
#define SUNZILOG_CONSOLE() (NULL)
#endif
-static void __devinit sunzilog_init_kbdms(struct uart_sunzilog_port *up)
+static void sunzilog_init_kbdms(struct uart_sunzilog_port *up)
{
int baud, brg;
@@ -1302,7 +1302,7 @@
}
#ifdef CONFIG_SERIO
-static void __devinit sunzilog_register_serio(struct uart_sunzilog_port *up)
+static void sunzilog_register_serio(struct uart_sunzilog_port *up)
{
struct serio *serio = &up->serio;
@@ -1331,7 +1331,7 @@
}
#endif
-static void __devinit sunzilog_init_hw(struct uart_sunzilog_port *up)
+static void sunzilog_init_hw(struct uart_sunzilog_port *up)
{
struct zilog_channel __iomem *channel;
unsigned long flags;
@@ -1400,7 +1400,7 @@
static int zilog_irq;
-static int __devinit zs_probe(struct platform_device *op)
+static int zs_probe(struct platform_device *op)
{
static int kbm_inst, uart_inst;
int inst;
@@ -1507,7 +1507,7 @@
return 0;
}
-static void __devexit zs_remove_one(struct uart_sunzilog_port *up)
+static void zs_remove_one(struct uart_sunzilog_port *up)
{
if (ZS_IS_KEYB(up) || ZS_IS_MOUSE(up)) {
#ifdef CONFIG_SERIO
@@ -1517,7 +1517,7 @@
uart_remove_one_port(&sunzilog_reg, &up->port);
}
-static int __devexit zs_remove(struct platform_device *op)
+static int zs_remove(struct platform_device *op)
{
struct uart_sunzilog_port *up = dev_get_drvdata(&op->dev);
struct zilog_layout __iomem *regs;
@@ -1548,7 +1548,7 @@
.of_match_table = zs_match,
},
.probe = zs_probe,
- .remove = __devexit_p(zs_remove),
+ .remove = zs_remove,
};
static int __init sunzilog_init(void)
diff --git a/drivers/tty/serial/timbuart.c b/drivers/tty/serial/timbuart.c
index 70f97491..5be0d68 100644
--- a/drivers/tty/serial/timbuart.c
+++ b/drivers/tty/serial/timbuart.c
@@ -426,7 +426,7 @@
.nr = 1
};
-static int __devinit timbuart_probe(struct platform_device *dev)
+static int timbuart_probe(struct platform_device *dev)
{
int err, irq;
struct timbuart_port *uart;
@@ -492,7 +492,7 @@
return err;
}
-static int __devexit timbuart_remove(struct platform_device *dev)
+static int timbuart_remove(struct platform_device *dev)
{
struct timbuart_port *uart = platform_get_drvdata(dev);
@@ -510,7 +510,7 @@
.owner = THIS_MODULE,
},
.probe = timbuart_probe,
- .remove = __devexit_p(timbuart_remove),
+ .remove = timbuart_remove,
};
module_platform_driver(timbuart_platform_driver);
diff --git a/drivers/tty/serial/uartlite.c b/drivers/tty/serial/uartlite.c
index 6579ffd..89eee43 100644
--- a/drivers/tty/serial/uartlite.c
+++ b/drivers/tty/serial/uartlite.c
@@ -408,7 +408,7 @@
spin_unlock_irqrestore(&port->lock, flags);
}
-static int __devinit ulite_console_setup(struct console *co, char *options)
+static int ulite_console_setup(struct console *co, char *options)
{
struct uart_port *port;
int baud = 9600;
@@ -486,7 +486,7 @@
*
* Returns: 0 on success, <0 otherwise
*/
-static int __devinit ulite_assign(struct device *dev, int id, u32 base, int irq)
+static int ulite_assign(struct device *dev, int id, u32 base, int irq)
{
struct uart_port *port;
int rc;
@@ -542,7 +542,7 @@
*
* @dev: pointer to device structure
*/
-static int __devexit ulite_release(struct device *dev)
+static int ulite_release(struct device *dev)
{
struct uart_port *port = dev_get_drvdata(dev);
int rc = 0;
@@ -562,7 +562,7 @@
#if defined(CONFIG_OF)
/* Match table for of_platform binding */
-static struct of_device_id ulite_of_match[] __devinitdata = {
+static struct of_device_id ulite_of_match[] = {
{ .compatible = "xlnx,opb-uartlite-1.00.b", },
{ .compatible = "xlnx,xps-uartlite-1.00.a", },
{}
@@ -570,7 +570,7 @@
MODULE_DEVICE_TABLE(of, ulite_of_match);
#endif /* CONFIG_OF */
-static int __devinit ulite_probe(struct platform_device *pdev)
+static int ulite_probe(struct platform_device *pdev)
{
struct resource *res, *res2;
int id = pdev->id;
@@ -593,7 +593,7 @@
return ulite_assign(&pdev->dev, id, res->start, res2->start);
}
-static int __devexit ulite_remove(struct platform_device *pdev)
+static int ulite_remove(struct platform_device *pdev)
{
return ulite_release(&pdev->dev);
}
@@ -603,7 +603,7 @@
static struct platform_driver ulite_platform_driver = {
.probe = ulite_probe,
- .remove = __devexit_p(ulite_remove),
+ .remove = ulite_remove,
.driver = {
.owner = THIS_MODULE,
.name = "uartlite",
diff --git a/drivers/tty/serial/vr41xx_siu.c b/drivers/tty/serial/vr41xx_siu.c
index cf0d948..62ee016 100644
--- a/drivers/tty/serial/vr41xx_siu.c
+++ b/drivers/tty/serial/vr41xx_siu.c
@@ -823,7 +823,7 @@
.data = &siu_uart_driver,
};
-static int __devinit siu_console_init(void)
+static int siu_console_init(void)
{
struct uart_port *port;
int i;
@@ -867,7 +867,7 @@
.cons = SERIAL_VR41XX_CONSOLE,
};
-static int __devinit siu_probe(struct platform_device *dev)
+static int siu_probe(struct platform_device *dev)
{
struct uart_port *port;
int num, i, retval;
@@ -901,7 +901,7 @@
return 0;
}
-static int __devexit siu_remove(struct platform_device *dev)
+static int siu_remove(struct platform_device *dev)
{
struct uart_port *port;
int i;
@@ -952,7 +952,7 @@
static struct platform_driver siu_device_driver = {
.probe = siu_probe,
- .remove = __devexit_p(siu_remove),
+ .remove = siu_remove,
.suspend = siu_suspend,
.resume = siu_resume,
.driver = {
diff --git a/drivers/tty/serial/vt8500_serial.c b/drivers/tty/serial/vt8500_serial.c
index 205d4cf..8fd1814 100644
--- a/drivers/tty/serial/vt8500_serial.c
+++ b/drivers/tty/serial/vt8500_serial.c
@@ -554,7 +554,7 @@
.cons = VT8500_CONSOLE,
};
-static int __devinit vt8500_serial_probe(struct platform_device *pdev)
+static int vt8500_serial_probe(struct platform_device *pdev)
{
struct vt8500_port *vt8500_port;
struct resource *mmres, *irqres;
@@ -567,10 +567,6 @@
if (!mmres || !irqres)
return -ENODEV;
- vt8500_port = kzalloc(sizeof(struct vt8500_port), GFP_KERNEL);
- if (!vt8500_port)
- return -ENOMEM;
-
if (np)
port = of_alias_get_id(np, "serial");
if (port > VT8500_MAX_PORTS)
@@ -593,6 +589,10 @@
return -EBUSY;
}
+ vt8500_port = kzalloc(sizeof(struct vt8500_port), GFP_KERNEL);
+ if (!vt8500_port)
+ return -ENOMEM;
+
vt8500_port->uart.type = PORT_VT8500;
vt8500_port->uart.iotype = UPIO_MEM;
vt8500_port->uart.mapbase = mmres->start;
@@ -634,7 +634,7 @@
return ret;
}
-static int __devexit vt8500_serial_remove(struct platform_device *pdev)
+static int vt8500_serial_remove(struct platform_device *pdev)
{
struct vt8500_port *vt8500_port = platform_get_drvdata(pdev);
@@ -652,7 +652,7 @@
static struct platform_driver vt8500_platform_driver = {
.probe = vt8500_serial_probe,
- .remove = __devexit_p(vt8500_serial_remove),
+ .remove = vt8500_serial_remove,
.driver = {
.name = "vt8500_serial",
.owner = THIS_MODULE,
diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c
index b627363..9ab9103 100644
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -939,22 +939,18 @@
*
* Returns 0 on success, negative error otherwise
**/
-static int __devinit xuartps_probe(struct platform_device *pdev)
+static int xuartps_probe(struct platform_device *pdev)
{
int rc;
struct uart_port *port;
struct resource *res, *res2;
int clk = 0;
-#ifdef CONFIG_OF
const unsigned int *prop;
prop = of_get_property(pdev->dev.of_node, "clock", NULL);
if (prop)
clk = be32_to_cpup(prop);
-#else
- clk = *((unsigned int *)(pdev->dev.platform_data));
-#endif
if (!clk) {
dev_err(&pdev->dev, "no clock specified\n");
return -ENODEV;
@@ -1001,7 +997,7 @@
*
* Returns 0 on success, negative error otherwise
**/
-static int __devexit xuartps_remove(struct platform_device *pdev)
+static int xuartps_remove(struct platform_device *pdev)
{
struct uart_port *port = dev_get_drvdata(&pdev->dev);
int rc = 0;
@@ -1044,16 +1040,11 @@
}
/* Match table for of_platform binding */
-
-#ifdef CONFIG_OF
-static struct of_device_id xuartps_of_match[] __devinitdata = {
+static struct of_device_id xuartps_of_match[] = {
{ .compatible = "xlnx,xuartps", },
{}
};
MODULE_DEVICE_TABLE(of, xuartps_of_match);
-#else
-#define xuartps_of_match NULL
-#endif
static struct platform_driver xuartps_platform_driver = {
.probe = xuartps_probe, /* Probe method */
diff --git a/drivers/tty/synclink.c b/drivers/tty/synclink.c
index 70e3a52..9e071f6 100644
--- a/drivers/tty/synclink.c
+++ b/drivers/tty/synclink.c
@@ -898,7 +898,7 @@
.name = "synclink",
.id_table = synclink_pci_tbl,
.probe = synclink_init_one,
- .remove = __devexit_p(synclink_remove_one),
+ .remove = synclink_remove_one,
};
static struct tty_driver *serial_driver;
@@ -4425,6 +4425,7 @@
mgsl_release_resources(info);
tmp = info;
info = info->next_device;
+ tty_port_destroy(&tmp->port);
kfree(tmp);
}
@@ -8064,7 +8065,7 @@
#endif /* CONFIG_HDLC */
-static int __devinit synclink_init_one (struct pci_dev *dev,
+static int synclink_init_one (struct pci_dev *dev,
const struct pci_device_id *ent)
{
struct mgsl_struct *info;
@@ -8116,7 +8117,7 @@
return 0;
}
-static void __devexit synclink_remove_one (struct pci_dev *dev)
+static void synclink_remove_one (struct pci_dev *dev)
{
}
diff --git a/drivers/tty/synclink_gt.c b/drivers/tty/synclink_gt.c
index b38e954..aba1e59 100644
--- a/drivers/tty/synclink_gt.c
+++ b/drivers/tty/synclink_gt.c
@@ -110,7 +110,7 @@
.name = "synclink_gt",
.id_table = pci_table,
.probe = init_one,
- .remove = __devexit_p(remove_one),
+ .remove = remove_one,
};
static bool pci_registered;
@@ -3645,8 +3645,10 @@
for (i=0; i < port_count; ++i) {
port_array[i] = alloc_dev(adapter_num, i, pdev);
if (port_array[i] == NULL) {
- for (--i; i >= 0; --i)
+ for (--i; i >= 0; --i) {
+ tty_port_destroy(&port_array[i]->port);
kfree(port_array[i]);
+ }
return;
}
}
@@ -3696,7 +3698,7 @@
}
}
-static int __devinit init_one(struct pci_dev *dev,
+static int init_one(struct pci_dev *dev,
const struct pci_device_id *ent)
{
if (pci_enable_device(dev)) {
@@ -3708,7 +3710,7 @@
return 0;
}
-static void __devexit remove_one(struct pci_dev *dev)
+static void remove_one(struct pci_dev *dev)
{
}
@@ -3773,6 +3775,7 @@
release_resources(info);
tmp = info;
info = info->next_device;
+ tty_port_destroy(&tmp->port);
kfree(tmp);
}
diff --git a/drivers/tty/synclinkmp.c b/drivers/tty/synclinkmp.c
index f17d9f3..fd43fb6 100644
--- a/drivers/tty/synclinkmp.c
+++ b/drivers/tty/synclinkmp.c
@@ -492,7 +492,7 @@
.name = "synclinkmp",
.id_table = synclinkmp_pci_tbl,
.probe = synclinkmp_init_one,
- .remove = __devexit_p(synclinkmp_remove_one),
+ .remove = synclinkmp_remove_one,
};
@@ -3843,8 +3843,10 @@
for ( port = 0; port < SCA_MAX_PORTS; ++port ) {
port_array[port] = alloc_dev(adapter_num,port,pdev);
if( port_array[port] == NULL ) {
- for ( --port; port >= 0; --port )
+ for (--port; port >= 0; --port) {
+ tty_port_destroy(&port_array[port]->port);
kfree(port_array[port]);
+ }
return;
}
}
@@ -3953,6 +3955,7 @@
}
tmp = info;
info = info->next_device;
+ tty_port_destroy(&tmp->port);
kfree(tmp);
}
@@ -5592,7 +5595,7 @@
}
-static int __devinit synclinkmp_init_one (struct pci_dev *dev,
+static int synclinkmp_init_one (struct pci_dev *dev,
const struct pci_device_id *ent)
{
if (pci_enable_device(dev)) {
@@ -5603,6 +5606,6 @@
return 0;
}
-static void __devexit synclinkmp_remove_one (struct pci_dev *dev)
+static void synclinkmp_remove_one (struct pci_dev *dev)
{
}
diff --git a/drivers/tty/sysrq.c b/drivers/tty/sysrq.c
index 16ee6ce..b3c4a25 100644
--- a/drivers/tty/sysrq.c
+++ b/drivers/tty/sysrq.c
@@ -346,7 +346,8 @@
static void moom_callback(struct work_struct *ignored)
{
- out_of_memory(node_zonelist(0, GFP_KERNEL), GFP_KERNEL, 0, NULL, true);
+ out_of_memory(node_zonelist(first_online_node, GFP_KERNEL), GFP_KERNEL,
+ 0, NULL, true);
}
static DECLARE_WORK(moom_work, moom_callback);
diff --git a/drivers/tty/tty_audit.c b/drivers/tty/tty_audit.c
index b0b39b8..6953dc8 100644
--- a/drivers/tty/tty_audit.c
+++ b/drivers/tty/tty_audit.c
@@ -23,7 +23,7 @@
};
static struct tty_audit_buf *tty_audit_buf_alloc(int major, int minor,
- int icanon)
+ unsigned icanon)
{
struct tty_audit_buf *buf;
@@ -239,7 +239,8 @@
* if TTY auditing is disabled or out of memory. Otherwise, return a new
* reference to the buffer.
*/
-static struct tty_audit_buf *tty_audit_buf_get(struct tty_struct *tty)
+static struct tty_audit_buf *tty_audit_buf_get(struct tty_struct *tty,
+ unsigned icanon)
{
struct tty_audit_buf *buf, *buf2;
@@ -257,7 +258,7 @@
buf2 = tty_audit_buf_alloc(tty->driver->major,
tty->driver->minor_start + tty->index,
- tty->icanon);
+ icanon);
if (buf2 == NULL) {
audit_log_lost("out of memory in TTY auditing");
return NULL;
@@ -287,7 +288,7 @@
* Audit @data of @size from @tty, if necessary.
*/
void tty_audit_add_data(struct tty_struct *tty, unsigned char *data,
- size_t size)
+ size_t size, unsigned icanon)
{
struct tty_audit_buf *buf;
int major, minor;
@@ -299,7 +300,7 @@
&& tty->driver->subtype == PTY_TYPE_MASTER)
return;
- buf = tty_audit_buf_get(tty);
+ buf = tty_audit_buf_get(tty, icanon);
if (!buf)
return;
@@ -307,11 +308,11 @@
major = tty->driver->major;
minor = tty->driver->minor_start + tty->index;
if (buf->major != major || buf->minor != minor
- || buf->icanon != tty->icanon) {
+ || buf->icanon != icanon) {
tty_audit_buf_push_current(buf);
buf->major = major;
buf->minor = minor;
- buf->icanon = tty->icanon;
+ buf->icanon = icanon;
}
do {
size_t run;
diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index 91e326f..45d9161 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -27,19 +27,21 @@
* Locking: none
*/
-void tty_buffer_free_all(struct tty_struct *tty)
+void tty_buffer_free_all(struct tty_port *port)
{
+ struct tty_bufhead *buf = &port->buf;
struct tty_buffer *thead;
- while ((thead = tty->buf.head) != NULL) {
- tty->buf.head = thead->next;
+
+ while ((thead = buf->head) != NULL) {
+ buf->head = thead->next;
kfree(thead);
}
- while ((thead = tty->buf.free) != NULL) {
- tty->buf.free = thead->next;
+ while ((thead = buf->free) != NULL) {
+ buf->free = thead->next;
kfree(thead);
}
- tty->buf.tail = NULL;
- tty->buf.memory_used = 0;
+ buf->tail = NULL;
+ buf->memory_used = 0;
}
/**
@@ -54,11 +56,11 @@
* Locking: Caller must hold tty->buf.lock
*/
-static struct tty_buffer *tty_buffer_alloc(struct tty_struct *tty, size_t size)
+static struct tty_buffer *tty_buffer_alloc(struct tty_port *port, size_t size)
{
struct tty_buffer *p;
- if (tty->buf.memory_used + size > 65536)
+ if (port->buf.memory_used + size > 65536)
return NULL;
p = kmalloc(sizeof(struct tty_buffer) + 2 * size, GFP_ATOMIC);
if (p == NULL)
@@ -70,7 +72,7 @@
p->read = 0;
p->char_buf_ptr = (char *)(p->data);
p->flag_buf_ptr = (unsigned char *)p->char_buf_ptr + size;
- tty->buf.memory_used += size;
+ port->buf.memory_used += size;
return p;
}
@@ -85,17 +87,19 @@
* Locking: Caller must hold tty->buf.lock
*/
-static void tty_buffer_free(struct tty_struct *tty, struct tty_buffer *b)
+static void tty_buffer_free(struct tty_port *port, struct tty_buffer *b)
{
+ struct tty_bufhead *buf = &port->buf;
+
/* Dumb strategy for now - should keep some stats */
- tty->buf.memory_used -= b->size;
- WARN_ON(tty->buf.memory_used < 0);
+ buf->memory_used -= b->size;
+ WARN_ON(buf->memory_used < 0);
if (b->size >= 512)
kfree(b);
else {
- b->next = tty->buf.free;
- tty->buf.free = b;
+ b->next = buf->free;
+ buf->free = b;
}
}
@@ -110,15 +114,16 @@
* Locking: Caller must hold tty->buf.lock
*/
-static void __tty_buffer_flush(struct tty_struct *tty)
+static void __tty_buffer_flush(struct tty_port *port)
{
+ struct tty_bufhead *buf = &port->buf;
struct tty_buffer *thead;
- while ((thead = tty->buf.head) != NULL) {
- tty->buf.head = thead->next;
- tty_buffer_free(tty, thead);
+ while ((thead = buf->head) != NULL) {
+ buf->head = thead->next;
+ tty_buffer_free(port, thead);
}
- tty->buf.tail = NULL;
+ buf->tail = NULL;
}
/**
@@ -134,21 +139,24 @@
void tty_buffer_flush(struct tty_struct *tty)
{
+ struct tty_port *port = tty->port;
+ struct tty_bufhead *buf = &port->buf;
unsigned long flags;
- spin_lock_irqsave(&tty->buf.lock, flags);
+
+ spin_lock_irqsave(&buf->lock, flags);
/* If the data is being pushed to the tty layer then we can't
process it here. Instead set a flag and the flush_to_ldisc
path will process the flush request before it exits */
- if (test_bit(TTY_FLUSHING, &tty->flags)) {
- set_bit(TTY_FLUSHPENDING, &tty->flags);
- spin_unlock_irqrestore(&tty->buf.lock, flags);
+ if (test_bit(TTYP_FLUSHING, &port->iflags)) {
+ set_bit(TTYP_FLUSHPENDING, &port->iflags);
+ spin_unlock_irqrestore(&buf->lock, flags);
wait_event(tty->read_wait,
- test_bit(TTY_FLUSHPENDING, &tty->flags) == 0);
+ test_bit(TTYP_FLUSHPENDING, &port->iflags) == 0);
return;
} else
- __tty_buffer_flush(tty);
- spin_unlock_irqrestore(&tty->buf.lock, flags);
+ __tty_buffer_flush(port);
+ spin_unlock_irqrestore(&buf->lock, flags);
}
/**
@@ -163,9 +171,9 @@
* Locking: Caller must hold tty->buf.lock
*/
-static struct tty_buffer *tty_buffer_find(struct tty_struct *tty, size_t size)
+static struct tty_buffer *tty_buffer_find(struct tty_port *port, size_t size)
{
- struct tty_buffer **tbh = &tty->buf.free;
+ struct tty_buffer **tbh = &port->buf.free;
while ((*tbh) != NULL) {
struct tty_buffer *t = *tbh;
if (t->size >= size) {
@@ -174,14 +182,14 @@
t->used = 0;
t->commit = 0;
t->read = 0;
- tty->buf.memory_used += t->size;
+ port->buf.memory_used += t->size;
return t;
}
tbh = &((*tbh)->next);
}
/* Round the buffer size out */
size = (size + 0xFF) & ~0xFF;
- return tty_buffer_alloc(tty, size);
+ return tty_buffer_alloc(port, size);
/* Should possibly check if this fails for the largest buffer we
have queued and recycle that ? */
}
@@ -192,29 +200,31 @@
*
* Make at least size bytes of linear space available for the tty
* buffer. If we fail return the size we managed to find.
- * Locking: Caller must hold tty->buf.lock
+ * Locking: Caller must hold port->buf.lock
*/
-static int __tty_buffer_request_room(struct tty_struct *tty, size_t size)
+static int __tty_buffer_request_room(struct tty_port *port, size_t size)
{
+ struct tty_bufhead *buf = &port->buf;
struct tty_buffer *b, *n;
int left;
/* OPTIMISATION: We could keep a per tty "zero" sized buffer to
remove this conditional if its worth it. This would be invisible
to the callers */
- if ((b = tty->buf.tail) != NULL)
+ b = buf->tail;
+ if (b != NULL)
left = b->size - b->used;
else
left = 0;
if (left < size) {
/* This is the slow path - looking for new buffers to use */
- if ((n = tty_buffer_find(tty, size)) != NULL) {
+ if ((n = tty_buffer_find(port, size)) != NULL) {
if (b != NULL) {
b->next = n;
b->commit = b->used;
} else
- tty->buf.head = n;
- tty->buf.tail = n;
+ buf->head = n;
+ buf->tail = n;
} else
size = left;
}
@@ -231,16 +241,17 @@
* Make at least size bytes of linear space available for the tty
* buffer. If we fail return the size we managed to find.
*
- * Locking: Takes tty->buf.lock
+ * Locking: Takes port->buf.lock
*/
int tty_buffer_request_room(struct tty_struct *tty, size_t size)
{
+ struct tty_port *port = tty->port;
unsigned long flags;
int length;
- spin_lock_irqsave(&tty->buf.lock, flags);
- length = __tty_buffer_request_room(tty, size);
- spin_unlock_irqrestore(&tty->buf.lock, flags);
+ spin_lock_irqsave(&port->buf.lock, flags);
+ length = __tty_buffer_request_room(port, size);
+ spin_unlock_irqrestore(&port->buf.lock, flags);
return length;
}
EXPORT_SYMBOL_GPL(tty_buffer_request_room);
@@ -255,12 +266,13 @@
* Queue a series of bytes to the tty buffering. All the characters
* passed are marked with the supplied flag. Returns the number added.
*
- * Locking: Called functions may take tty->buf.lock
+ * Locking: Called functions may take port->buf.lock
*/
int tty_insert_flip_string_fixed_flag(struct tty_struct *tty,
const unsigned char *chars, char flag, size_t size)
{
+ struct tty_bufhead *buf = &tty->port->buf;
int copied = 0;
do {
int goal = min_t(size_t, size - copied, TTY_BUFFER_PAGE);
@@ -268,18 +280,18 @@
unsigned long flags;
struct tty_buffer *tb;
- spin_lock_irqsave(&tty->buf.lock, flags);
- space = __tty_buffer_request_room(tty, goal);
- tb = tty->buf.tail;
+ spin_lock_irqsave(&buf->lock, flags);
+ space = __tty_buffer_request_room(tty->port, goal);
+ tb = buf->tail;
/* If there is no space then tb may be NULL */
if (unlikely(space == 0)) {
- spin_unlock_irqrestore(&tty->buf.lock, flags);
+ spin_unlock_irqrestore(&buf->lock, flags);
break;
}
memcpy(tb->char_buf_ptr + tb->used, chars, space);
memset(tb->flag_buf_ptr + tb->used, flag, space);
tb->used += space;
- spin_unlock_irqrestore(&tty->buf.lock, flags);
+ spin_unlock_irqrestore(&buf->lock, flags);
copied += space;
chars += space;
/* There is a small chance that we need to split the data over
@@ -300,12 +312,13 @@
* the flags array indicates the status of the character. Returns the
* number added.
*
- * Locking: Called functions may take tty->buf.lock
+ * Locking: Called functions may take port->buf.lock
*/
int tty_insert_flip_string_flags(struct tty_struct *tty,
const unsigned char *chars, const char *flags, size_t size)
{
+ struct tty_bufhead *buf = &tty->port->buf;
int copied = 0;
do {
int goal = min_t(size_t, size - copied, TTY_BUFFER_PAGE);
@@ -313,18 +326,18 @@
unsigned long __flags;
struct tty_buffer *tb;
- spin_lock_irqsave(&tty->buf.lock, __flags);
- space = __tty_buffer_request_room(tty, goal);
- tb = tty->buf.tail;
+ spin_lock_irqsave(&buf->lock, __flags);
+ space = __tty_buffer_request_room(tty->port, goal);
+ tb = buf->tail;
/* If there is no space then tb may be NULL */
if (unlikely(space == 0)) {
- spin_unlock_irqrestore(&tty->buf.lock, __flags);
+ spin_unlock_irqrestore(&buf->lock, __flags);
break;
}
memcpy(tb->char_buf_ptr + tb->used, chars, space);
memcpy(tb->flag_buf_ptr + tb->used, flags, space);
tb->used += space;
- spin_unlock_irqrestore(&tty->buf.lock, __flags);
+ spin_unlock_irqrestore(&buf->lock, __flags);
copied += space;
chars += space;
flags += space;
@@ -342,18 +355,23 @@
* Takes any pending buffers and transfers their ownership to the
* ldisc side of the queue. It then schedules those characters for
* processing by the line discipline.
+ * Note that this function can only be used when the low_latency flag
+ * is unset. Otherwise the workqueue won't be flushed.
*
- * Locking: Takes tty->buf.lock
+ * Locking: Takes port->buf.lock
*/
void tty_schedule_flip(struct tty_struct *tty)
{
+ struct tty_bufhead *buf = &tty->port->buf;
unsigned long flags;
- spin_lock_irqsave(&tty->buf.lock, flags);
- if (tty->buf.tail != NULL)
- tty->buf.tail->commit = tty->buf.tail->used;
- spin_unlock_irqrestore(&tty->buf.lock, flags);
- schedule_work(&tty->buf.work);
+ WARN_ON(tty->low_latency);
+
+ spin_lock_irqsave(&buf->lock, flags);
+ if (buf->tail != NULL)
+ buf->tail->commit = buf->tail->used;
+ spin_unlock_irqrestore(&buf->lock, flags);
+ schedule_work(&buf->work);
}
EXPORT_SYMBOL(tty_schedule_flip);
@@ -369,26 +387,27 @@
* that need their own block copy routines into the buffer. There is no
* guarantee the buffer is a DMA target!
*
- * Locking: May call functions taking tty->buf.lock
+ * Locking: May call functions taking port->buf.lock
*/
int tty_prepare_flip_string(struct tty_struct *tty, unsigned char **chars,
- size_t size)
+ size_t size)
{
+ struct tty_bufhead *buf = &tty->port->buf;
int space;
unsigned long flags;
struct tty_buffer *tb;
- spin_lock_irqsave(&tty->buf.lock, flags);
- space = __tty_buffer_request_room(tty, size);
+ spin_lock_irqsave(&buf->lock, flags);
+ space = __tty_buffer_request_room(tty->port, size);
- tb = tty->buf.tail;
+ tb = buf->tail;
if (likely(space)) {
*chars = tb->char_buf_ptr + tb->used;
memset(tb->flag_buf_ptr + tb->used, TTY_NORMAL, space);
tb->used += space;
}
- spin_unlock_irqrestore(&tty->buf.lock, flags);
+ spin_unlock_irqrestore(&buf->lock, flags);
return space;
}
EXPORT_SYMBOL_GPL(tty_prepare_flip_string);
@@ -406,26 +425,27 @@
* that need their own block copy routines into the buffer. There is no
* guarantee the buffer is a DMA target!
*
- * Locking: May call functions taking tty->buf.lock
+ * Locking: May call functions taking port->buf.lock
*/
int tty_prepare_flip_string_flags(struct tty_struct *tty,
unsigned char **chars, char **flags, size_t size)
{
+ struct tty_bufhead *buf = &tty->port->buf;
int space;
unsigned long __flags;
struct tty_buffer *tb;
- spin_lock_irqsave(&tty->buf.lock, __flags);
- space = __tty_buffer_request_room(tty, size);
+ spin_lock_irqsave(&buf->lock, __flags);
+ space = __tty_buffer_request_room(tty->port, size);
- tb = tty->buf.tail;
+ tb = buf->tail;
if (likely(space)) {
*chars = tb->char_buf_ptr + tb->used;
*flags = tb->flag_buf_ptr + tb->used;
tb->used += space;
}
- spin_unlock_irqrestore(&tty->buf.lock, __flags);
+ spin_unlock_irqrestore(&buf->lock, __flags);
return space;
}
EXPORT_SYMBOL_GPL(tty_prepare_flip_string_flags);
@@ -446,20 +466,25 @@
static void flush_to_ldisc(struct work_struct *work)
{
- struct tty_struct *tty =
- container_of(work, struct tty_struct, buf.work);
+ struct tty_port *port = container_of(work, struct tty_port, buf.work);
+ struct tty_bufhead *buf = &port->buf;
+ struct tty_struct *tty;
unsigned long flags;
struct tty_ldisc *disc;
+ tty = port->itty;
+ if (WARN_RATELIMIT(tty == NULL, "tty is NULL\n"))
+ return;
+
disc = tty_ldisc_ref(tty);
if (disc == NULL) /* !TTY_LDISC */
return;
- spin_lock_irqsave(&tty->buf.lock, flags);
+ spin_lock_irqsave(&buf->lock, flags);
- if (!test_and_set_bit(TTY_FLUSHING, &tty->flags)) {
+ if (!test_and_set_bit(TTYP_FLUSHING, &port->iflags)) {
struct tty_buffer *head;
- while ((head = tty->buf.head) != NULL) {
+ while ((head = buf->head) != NULL) {
int count;
char *char_buf;
unsigned char *flag_buf;
@@ -468,14 +493,14 @@
if (!count) {
if (head->next == NULL)
break;
- tty->buf.head = head->next;
- tty_buffer_free(tty, head);
+ buf->head = head->next;
+ tty_buffer_free(port, head);
continue;
}
/* Ldisc or user is trying to flush the buffers
we are feeding to the ldisc, stop feeding the
line discipline as we want to empty the queue */
- if (test_bit(TTY_FLUSHPENDING, &tty->flags))
+ if (test_bit(TTYP_FLUSHPENDING, &port->iflags))
break;
if (!tty->receive_room)
break;
@@ -484,22 +509,22 @@
char_buf = head->char_buf_ptr + head->read;
flag_buf = head->flag_buf_ptr + head->read;
head->read += count;
- spin_unlock_irqrestore(&tty->buf.lock, flags);
+ spin_unlock_irqrestore(&buf->lock, flags);
disc->ops->receive_buf(tty, char_buf,
flag_buf, count);
- spin_lock_irqsave(&tty->buf.lock, flags);
+ spin_lock_irqsave(&buf->lock, flags);
}
- clear_bit(TTY_FLUSHING, &tty->flags);
+ clear_bit(TTYP_FLUSHING, &port->iflags);
}
/* We may have a deferred request to flush the input buffer,
if so pull the chain under the lock and empty the queue */
- if (test_bit(TTY_FLUSHPENDING, &tty->flags)) {
- __tty_buffer_flush(tty);
- clear_bit(TTY_FLUSHPENDING, &tty->flags);
+ if (test_bit(TTYP_FLUSHPENDING, &port->iflags)) {
+ __tty_buffer_flush(port);
+ clear_bit(TTYP_FLUSHPENDING, &port->iflags);
wake_up(&tty->read_wait);
}
- spin_unlock_irqrestore(&tty->buf.lock, flags);
+ spin_unlock_irqrestore(&buf->lock, flags);
tty_ldisc_deref(disc);
}
@@ -514,7 +539,8 @@
*/
void tty_flush_to_ldisc(struct tty_struct *tty)
{
- flush_work(&tty->buf.work);
+ if (!tty->low_latency)
+ flush_work(&tty->port->buf.work);
}
/**
@@ -532,16 +558,18 @@
void tty_flip_buffer_push(struct tty_struct *tty)
{
+ struct tty_bufhead *buf = &tty->port->buf;
unsigned long flags;
- spin_lock_irqsave(&tty->buf.lock, flags);
- if (tty->buf.tail != NULL)
- tty->buf.tail->commit = tty->buf.tail->used;
- spin_unlock_irqrestore(&tty->buf.lock, flags);
+
+ spin_lock_irqsave(&buf->lock, flags);
+ if (buf->tail != NULL)
+ buf->tail->commit = buf->tail->used;
+ spin_unlock_irqrestore(&buf->lock, flags);
if (tty->low_latency)
- flush_to_ldisc(&tty->buf.work);
+ flush_to_ldisc(&buf->work);
else
- schedule_work(&tty->buf.work);
+ schedule_work(&buf->work);
}
EXPORT_SYMBOL(tty_flip_buffer_push);
@@ -555,13 +583,15 @@
* Locking: none
*/
-void tty_buffer_init(struct tty_struct *tty)
+void tty_buffer_init(struct tty_port *port)
{
- spin_lock_init(&tty->buf.lock);
- tty->buf.head = NULL;
- tty->buf.tail = NULL;
- tty->buf.free = NULL;
- tty->buf.memory_used = 0;
- INIT_WORK(&tty->buf.work, flush_to_ldisc);
+ struct tty_bufhead *buf = &port->buf;
+
+ spin_lock_init(&buf->lock);
+ buf->head = NULL;
+ buf->tail = NULL;
+ buf->free = NULL;
+ buf->memory_used = 0;
+ INIT_WORK(&buf->work, flush_to_ldisc);
}
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index 2ea176b..da9fde8 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -186,7 +186,6 @@
if (tty->dev)
put_device(tty->dev);
kfree(tty->write_buf);
- tty_buffer_free_all(tty);
tty->magic = 0xDEADDEAD;
kfree(tty);
}
@@ -237,7 +236,7 @@
}
/* Delete file from its tty */
-void tty_del_file(struct file *file)
+static void tty_del_file(struct file *file)
{
struct tty_file_private *priv = file->private_data;
@@ -555,7 +554,7 @@
* tasklist_lock to walk task list for hangup event
* ->siglock to protect ->signal/->sighand
*/
-void __tty_hangup(struct tty_struct *tty)
+static void __tty_hangup(struct tty_struct *tty)
{
struct file *cons_filp = NULL;
struct file *filp, *f = NULL;
@@ -1417,6 +1416,8 @@
"%s: %s driver does not set tty->port. This will crash the kernel later. Fix the driver!\n",
__func__, tty->driver->name);
+ tty->port->itty = tty;
+
/*
* Structures all installed ... call the ldisc open routines.
* If we fail here just call release_tty to clean up. No need
@@ -1552,6 +1553,7 @@
tty->ops->shutdown(tty);
tty_free_termios(tty);
tty_driver_remove_tty(tty->driver, tty);
+ tty->port->itty = NULL;
if (tty->link)
tty_kref_put(tty->link);
@@ -1625,7 +1627,6 @@
struct tty_struct *tty = file_tty(filp);
struct tty_struct *o_tty;
int pty_master, tty_closing, o_tty_closing, do_sleep;
- int devpts;
int idx;
char buf[64];
@@ -1640,7 +1641,6 @@
idx = tty->index;
pty_master = (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
tty->driver->subtype == PTY_TYPE_MASTER);
- devpts = (tty->driver->flags & TTY_DRIVER_DEVPTS_MEM) != 0;
/* Review: parallel close */
o_tty = tty->link;
@@ -1799,9 +1799,6 @@
release_tty(tty, idx);
mutex_unlock(&tty_mutex);
- /* Make this pty number available for reallocation */
- if (devpts)
- devpts_kill_index(inode, idx);
return 0;
}
@@ -2690,6 +2687,11 @@
case TIOCNXCL:
clear_bit(TTY_EXCLUSIVE, &tty->flags);
return 0;
+ case TIOCGEXCL:
+ {
+ int excl = test_bit(TTY_EXCLUSIVE, &tty->flags);
+ return put_user(excl, (int __user *)p);
+ }
case TIOCNOTTY:
if (current->signal->tty != tty)
return -ENOTTY;
@@ -2937,19 +2939,13 @@
tty_ldisc_init(tty);
tty->session = NULL;
tty->pgrp = NULL;
- tty->overrun_time = jiffies;
- tty_buffer_init(tty);
mutex_init(&tty->legacy_mutex);
mutex_init(&tty->termios_mutex);
mutex_init(&tty->ldisc_mutex);
init_waitqueue_head(&tty->write_wait);
init_waitqueue_head(&tty->read_wait);
INIT_WORK(&tty->hangup_work, do_tty_hangup);
- mutex_init(&tty->atomic_read_lock);
mutex_init(&tty->atomic_write_lock);
- mutex_init(&tty->output_lock);
- mutex_init(&tty->echo_lock);
- spin_lock_init(&tty->read_lock);
spin_lock_init(&tty->ctrl_lock);
INIT_LIST_HEAD(&tty->tty_files);
INIT_WORK(&tty->SAK_work, do_SAK_work);
diff --git a/drivers/tty/tty_ioctl.c b/drivers/tty/tty_ioctl.c
index 12b1fa0..8481b29 100644
--- a/drivers/tty/tty_ioctl.c
+++ b/drivers/tty/tty_ioctl.c
@@ -1118,7 +1118,6 @@
int n_tty_ioctl_helper(struct tty_struct *tty, struct file *file,
unsigned int cmd, unsigned long arg)
{
- unsigned long flags;
int retval;
switch (cmd) {
@@ -1153,26 +1152,6 @@
return 0;
case TCFLSH:
return tty_perform_flush(tty, arg);
- case TIOCPKT:
- {
- int pktmode;
-
- if (tty->driver->type != TTY_DRIVER_TYPE_PTY ||
- tty->driver->subtype != PTY_TYPE_MASTER)
- return -ENOTTY;
- if (get_user(pktmode, (int __user *) arg))
- return -EFAULT;
- spin_lock_irqsave(&tty->ctrl_lock, flags);
- if (pktmode) {
- if (!tty->packet) {
- tty->packet = 1;
- tty->link->ctrl_status = 0;
- }
- } else
- tty->packet = 0;
- spin_unlock_irqrestore(&tty->ctrl_lock, flags);
- return 0;
- }
default:
/* Try the mode commands */
return tty_mode_ioctl(tty, file, cmd, arg);
diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c
index 0f2a2c5..c578229 100644
--- a/drivers/tty/tty_ldisc.c
+++ b/drivers/tty/tty_ldisc.c
@@ -26,7 +26,7 @@
* callers who will do ldisc lookups and cannot sleep.
*/
-static DEFINE_SPINLOCK(tty_ldisc_lock);
+static DEFINE_RAW_SPINLOCK(tty_ldisc_lock);
static DECLARE_WAIT_QUEUE_HEAD(tty_ldisc_wait);
/* Line disc dispatch table */
static struct tty_ldisc_ops *tty_ldiscs[NR_LDISCS];
@@ -49,21 +49,21 @@
* If this is the last user, free the ldisc, and
* release the ldisc ops.
*
- * We really want an "atomic_dec_and_lock_irqsave()",
+ * We really want an "atomic_dec_and_raw_lock_irqsave()",
* but we don't have it, so this does it by hand.
*/
- local_irq_save(flags);
- if (atomic_dec_and_lock(&ld->users, &tty_ldisc_lock)) {
+ raw_spin_lock_irqsave(&tty_ldisc_lock, flags);
+ if (atomic_dec_and_test(&ld->users)) {
struct tty_ldisc_ops *ldo = ld->ops;
ldo->refcount--;
module_put(ldo->owner);
- spin_unlock_irqrestore(&tty_ldisc_lock, flags);
+ raw_spin_unlock_irqrestore(&tty_ldisc_lock, flags);
kfree(ld);
return;
}
- local_irq_restore(flags);
+ raw_spin_unlock_irqrestore(&tty_ldisc_lock, flags);
wake_up(&ld->wq_idle);
}
@@ -88,11 +88,11 @@
if (disc < N_TTY || disc >= NR_LDISCS)
return -EINVAL;
- spin_lock_irqsave(&tty_ldisc_lock, flags);
+ raw_spin_lock_irqsave(&tty_ldisc_lock, flags);
tty_ldiscs[disc] = new_ldisc;
new_ldisc->num = disc;
new_ldisc->refcount = 0;
- spin_unlock_irqrestore(&tty_ldisc_lock, flags);
+ raw_spin_unlock_irqrestore(&tty_ldisc_lock, flags);
return ret;
}
@@ -118,12 +118,12 @@
if (disc < N_TTY || disc >= NR_LDISCS)
return -EINVAL;
- spin_lock_irqsave(&tty_ldisc_lock, flags);
+ raw_spin_lock_irqsave(&tty_ldisc_lock, flags);
if (tty_ldiscs[disc]->refcount)
ret = -EBUSY;
else
tty_ldiscs[disc] = NULL;
- spin_unlock_irqrestore(&tty_ldisc_lock, flags);
+ raw_spin_unlock_irqrestore(&tty_ldisc_lock, flags);
return ret;
}
@@ -134,7 +134,7 @@
unsigned long flags;
struct tty_ldisc_ops *ldops, *ret;
- spin_lock_irqsave(&tty_ldisc_lock, flags);
+ raw_spin_lock_irqsave(&tty_ldisc_lock, flags);
ret = ERR_PTR(-EINVAL);
ldops = tty_ldiscs[disc];
if (ldops) {
@@ -144,7 +144,7 @@
ret = ldops;
}
}
- spin_unlock_irqrestore(&tty_ldisc_lock, flags);
+ raw_spin_unlock_irqrestore(&tty_ldisc_lock, flags);
return ret;
}
@@ -152,10 +152,10 @@
{
unsigned long flags;
- spin_lock_irqsave(&tty_ldisc_lock, flags);
+ raw_spin_lock_irqsave(&tty_ldisc_lock, flags);
ldops->refcount--;
module_put(ldops->owner);
- spin_unlock_irqrestore(&tty_ldisc_lock, flags);
+ raw_spin_unlock_irqrestore(&tty_ldisc_lock, flags);
}
/**
@@ -287,11 +287,11 @@
unsigned long flags;
struct tty_ldisc *ld;
- spin_lock_irqsave(&tty_ldisc_lock, flags);
+ raw_spin_lock_irqsave(&tty_ldisc_lock, flags);
ld = NULL;
if (test_bit(TTY_LDISC, &tty->flags))
ld = get_ldisc(tty->ldisc);
- spin_unlock_irqrestore(&tty_ldisc_lock, flags);
+ raw_spin_unlock_irqrestore(&tty_ldisc_lock, flags);
return ld;
}
@@ -512,7 +512,7 @@
static int tty_ldisc_halt(struct tty_struct *tty)
{
clear_bit(TTY_LDISC, &tty->flags);
- return cancel_work_sync(&tty->buf.work);
+ return cancel_work_sync(&tty->port->buf.work);
}
/**
@@ -525,7 +525,7 @@
{
flush_work(&tty->hangup_work);
flush_work(&tty->SAK_work);
- flush_work(&tty->buf.work);
+ flush_work(&tty->port->buf.work);
}
/**
@@ -704,9 +704,9 @@
/* Restart the work queue in case no characters kick it off. Safe if
already running */
if (work)
- schedule_work(&tty->buf.work);
+ schedule_work(&tty->port->buf.work);
if (o_work)
- schedule_work(&o_tty->buf.work);
+ schedule_work(&o_tty->port->buf.work);
mutex_unlock(&tty->ldisc_mutex);
tty_unlock(tty);
return retval;
@@ -817,7 +817,7 @@
*/
clear_bit(TTY_LDISC, &tty->flags);
tty_unlock(tty);
- cancel_work_sync(&tty->buf.work);
+ cancel_work_sync(&tty->port->buf.work);
mutex_unlock(&tty->ldisc_mutex);
retry:
tty_lock(tty);
@@ -897,6 +897,11 @@
static void tty_ldisc_kill(struct tty_struct *tty)
{
+ /* There cannot be users from userspace now. But there still might be
+ * drivers holding a reference via tty_ldisc_ref. Do not steal them the
+ * ldisc until they are done. */
+ tty_ldisc_wait_idle(tty, MAX_SCHEDULE_TIMEOUT);
+
mutex_lock(&tty->ldisc_mutex);
/*
* Now kill off the ldisc
diff --git a/drivers/tty/tty_mutex.c b/drivers/tty/tty_mutex.c
index 67feac9..2e41abe 100644
--- a/drivers/tty/tty_mutex.c
+++ b/drivers/tty/tty_mutex.c
@@ -19,7 +19,7 @@
unsigned int subclass)
{
if (tty->magic != TTY_MAGIC) {
- printk(KERN_ERR "L Bad %p\n", tty);
+ pr_err("L Bad %p\n", tty);
WARN_ON(1);
return;
}
@@ -36,7 +36,7 @@
void __lockfunc tty_unlock(struct tty_struct *tty)
{
if (tty->magic != TTY_MAGIC) {
- printk(KERN_ERR "U Bad %p\n", tty);
+ pr_err("U Bad %p\n", tty);
WARN_ON(1);
return;
}
diff --git a/drivers/tty/tty_port.c b/drivers/tty/tty_port.c
index d7bdd8d..b7ff59d 100644
--- a/drivers/tty/tty_port.c
+++ b/drivers/tty/tty_port.c
@@ -21,6 +21,7 @@
void tty_port_init(struct tty_port *port)
{
memset(port, 0, sizeof(*port));
+ tty_buffer_init(port);
init_waitqueue_head(&port->open_wait);
init_waitqueue_head(&port->close_wait);
init_waitqueue_head(&port->delta_msr_wait);
@@ -121,12 +122,27 @@
}
EXPORT_SYMBOL(tty_port_free_xmit_buf);
+/**
+ * tty_port_destroy -- destroy inited port
+ * @port: tty port to be doestroyed
+ *
+ * When a port was initialized using tty_port_init, one has to destroy the
+ * port by this function. Either indirectly by using tty_port refcounting
+ * (tty_port_put) or directly if refcounting is not used.
+ */
+void tty_port_destroy(struct tty_port *port)
+{
+ tty_buffer_free_all(port);
+}
+EXPORT_SYMBOL(tty_port_destroy);
+
static void tty_port_destructor(struct kref *kref)
{
struct tty_port *port = container_of(kref, struct tty_port, kref);
if (port->xmit_buf)
free_page((unsigned long)port->xmit_buf);
- if (port->ops->destruct)
+ tty_port_destroy(port);
+ if (port->ops && port->ops->destruct)
port->ops->destruct(port);
else
kfree(port);
diff --git a/drivers/tty/vt/consolemap.c b/drivers/tty/vt/consolemap.c
index 2aaa0c2..248381b 100644
--- a/drivers/tty/vt/consolemap.c
+++ b/drivers/tty/vt/consolemap.c
@@ -410,10 +410,8 @@
kfree(p->inverse_translations[i]);
p->inverse_translations[i] = NULL;
}
- if (p->inverse_trans_unicode) {
- kfree(p->inverse_trans_unicode);
- p->inverse_trans_unicode = NULL;
- }
+ kfree(p->inverse_trans_unicode);
+ p->inverse_trans_unicode = NULL;
}
/* Caller must hold the console lock */
diff --git a/drivers/tty/vt/selection.c b/drivers/tty/vt/selection.c
index 8e9b4be..60b7b69 100644
--- a/drivers/tty/vt/selection.c
+++ b/drivers/tty/vt/selection.c
@@ -341,15 +341,11 @@
struct tty_ldisc *ld;
DECLARE_WAITQUEUE(wait, current);
-
console_lock();
poke_blanked_console();
console_unlock();
- /* FIXME: wtf is this supposed to achieve ? */
- ld = tty_ldisc_ref(tty);
- if (!ld)
- ld = tty_ldisc_ref_wait(tty);
+ ld = tty_ldisc_ref_wait(tty);
/* FIXME: this is completely unsafe */
add_wait_queue(&vc->paste_wait, &wait);
@@ -361,8 +357,7 @@
}
count = sel_buffer_lth - pasted;
count = min(count, tty->receive_room);
- tty->ldisc->ops->receive_buf(tty, sel_buffer + pasted,
- NULL, count);
+ ld->ops->receive_buf(tty, sel_buffer + pasted, NULL, count);
pasted += count;
}
remove_wait_queue(&vc->paste_wait, &wait);
diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c
index 4e0d0c3..8fd8968 100644
--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -779,6 +779,7 @@
con_set_default_unimap(vc);
vc->vc_screenbuf = kmalloc(vc->vc_screenbuf_size, GFP_KERNEL);
if (!vc->vc_screenbuf) {
+ tty_port_destroy(&vc->port);
kfree(vc);
vc_cons[currcons].d = NULL;
return -ENOMEM;
@@ -999,8 +1000,10 @@
put_pid(vc->vt_pid);
module_put(vc->vc_sw->owner);
kfree(vc->vc_screenbuf);
- if (currcons >= MIN_NR_CONSOLES)
+ if (currcons >= MIN_NR_CONSOLES) {
+ tty_port_destroy(&vc->port);
kfree(vc);
+ }
vc_cons[currcons].d = NULL;
}
}
diff --git a/drivers/tty/vt/vt_ioctl.c b/drivers/tty/vt/vt_ioctl.c
index b841f56..98ff173 100644
--- a/drivers/tty/vt/vt_ioctl.c
+++ b/drivers/tty/vt/vt_ioctl.c
@@ -25,6 +25,7 @@
#include <linux/console.h>
#include <linux/consolemap.h>
#include <linux/signal.h>
+#include <linux/suspend.h>
#include <linux/timex.h>
#include <asm/io.h>
diff --git a/drivers/uio/Kconfig b/drivers/uio/Kconfig
index 6f3ea9b..82e2b89 100644
--- a/drivers/uio/Kconfig
+++ b/drivers/uio/Kconfig
@@ -44,6 +44,22 @@
If you don't know what to do here, say N.
+config UIO_DMEM_GENIRQ
+ tristate "Userspace platform driver with generic irq and dynamic memory"
+ help
+ Platform driver for Userspace I/O devices, including generic
+ interrupt handling code. Shared interrupts are not supported.
+
+ Memory regions can be specified with the same platform device
+ resources as the UIO_PDRV drivers, but dynamic regions can also
+ be specified.
+ The number and size of these regions is static,
+ but the memory allocation is not performed until
+ the associated device file is opened. The
+ memory is freed once the uio device is closed.
+
+ If you don't know what to do here, say N.
+
config UIO_AEC
tristate "AEC video timestamp device"
depends on PCI
diff --git a/drivers/uio/Makefile b/drivers/uio/Makefile
index d4dd9a5..b354c53 100644
--- a/drivers/uio/Makefile
+++ b/drivers/uio/Makefile
@@ -2,6 +2,7 @@
obj-$(CONFIG_UIO_CIF) += uio_cif.o
obj-$(CONFIG_UIO_PDRV) += uio_pdrv.o
obj-$(CONFIG_UIO_PDRV_GENIRQ) += uio_pdrv_genirq.o
+obj-$(CONFIG_UIO_DMEM_GENIRQ) += uio_dmem_genirq.o
obj-$(CONFIG_UIO_AEC) += uio_aec.o
obj-$(CONFIG_UIO_SERCOS3) += uio_sercos3.o
obj-$(CONFIG_UIO_PCI_GENERIC) += uio_pci_generic.o
diff --git a/drivers/uio/uio_aec.c b/drivers/uio/uio_aec.c
index 72b22d4..1548982 100644
--- a/drivers/uio/uio_aec.c
+++ b/drivers/uio/uio_aec.c
@@ -78,7 +78,7 @@
ioread8(i->priv + 0x07));
}
-static int __devinit probe(struct pci_dev *pdev, const struct pci_device_id *id)
+static int probe(struct pci_dev *pdev, const struct pci_device_id *id)
{
struct uio_info *info;
int ret;
diff --git a/drivers/uio/uio_cif.c b/drivers/uio/uio_cif.c
index a84a451..7dd6fc6 100644
--- a/drivers/uio/uio_cif.c
+++ b/drivers/uio/uio_cif.c
@@ -40,7 +40,7 @@
return IRQ_HANDLED;
}
-static int __devinit hilscher_pci_probe(struct pci_dev *dev,
+static int hilscher_pci_probe(struct pci_dev *dev,
const struct pci_device_id *id)
{
struct uio_info *info;
@@ -112,7 +112,7 @@
kfree (info);
}
-static struct pci_device_id hilscher_pci_ids[] __devinitdata = {
+static struct pci_device_id hilscher_pci_ids[] = {
{
.vendor = PCI_VENDOR_ID_PLX,
.device = PCI_DEVICE_ID_PLX_9030,
diff --git a/drivers/uio/uio_dmem_genirq.c b/drivers/uio/uio_dmem_genirq.c
new file mode 100644
index 0000000..252434c
--- /dev/null
+++ b/drivers/uio/uio_dmem_genirq.c
@@ -0,0 +1,359 @@
+/*
+ * drivers/uio/uio_dmem_genirq.c
+ *
+ * Userspace I/O platform driver with generic IRQ handling code.
+ *
+ * Copyright (C) 2012 Damian Hobson-Garcia
+ *
+ * Based on uio_pdrv_genirq.c by Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/uio_driver.h>
+#include <linux/spinlock.h>
+#include <linux/bitops.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/platform_data/uio_dmem_genirq.h>
+#include <linux/stringify.h>
+#include <linux/pm_runtime.h>
+#include <linux/dma-mapping.h>
+#include <linux/slab.h>
+
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/of_address.h>
+
+#define DRIVER_NAME "uio_dmem_genirq"
+#define DMEM_MAP_ERROR (~0)
+
+struct uio_dmem_genirq_platdata {
+ struct uio_info *uioinfo;
+ spinlock_t lock;
+ unsigned long flags;
+ struct platform_device *pdev;
+ unsigned int dmem_region_start;
+ unsigned int num_dmem_regions;
+ void *dmem_region_vaddr[MAX_UIO_MAPS];
+ struct mutex alloc_lock;
+ unsigned int refcnt;
+};
+
+static int uio_dmem_genirq_open(struct uio_info *info, struct inode *inode)
+{
+ struct uio_dmem_genirq_platdata *priv = info->priv;
+ struct uio_mem *uiomem;
+ int ret = 0;
+ int dmem_region = priv->dmem_region_start;
+
+ uiomem = &priv->uioinfo->mem[priv->dmem_region_start];
+
+ mutex_lock(&priv->alloc_lock);
+ while (!priv->refcnt && uiomem < &priv->uioinfo->mem[MAX_UIO_MAPS]) {
+ void *addr;
+ if (!uiomem->size)
+ break;
+
+ addr = dma_alloc_coherent(&priv->pdev->dev, uiomem->size,
+ (dma_addr_t *)&uiomem->addr, GFP_KERNEL);
+ if (!addr) {
+ uiomem->addr = DMEM_MAP_ERROR;
+ }
+ priv->dmem_region_vaddr[dmem_region++] = addr;
+ ++uiomem;
+ }
+ priv->refcnt++;
+
+ mutex_unlock(&priv->alloc_lock);
+ /* Wait until the Runtime PM code has woken up the device */
+ pm_runtime_get_sync(&priv->pdev->dev);
+ return ret;
+}
+
+static int uio_dmem_genirq_release(struct uio_info *info, struct inode *inode)
+{
+ struct uio_dmem_genirq_platdata *priv = info->priv;
+ struct uio_mem *uiomem;
+ int dmem_region = priv->dmem_region_start;
+
+ /* Tell the Runtime PM code that the device has become idle */
+ pm_runtime_put_sync(&priv->pdev->dev);
+
+ uiomem = &priv->uioinfo->mem[priv->dmem_region_start];
+
+ mutex_lock(&priv->alloc_lock);
+
+ priv->refcnt--;
+ while (!priv->refcnt && uiomem < &priv->uioinfo->mem[MAX_UIO_MAPS]) {
+ if (!uiomem->size)
+ break;
+ if (priv->dmem_region_vaddr[dmem_region]) {
+ dma_free_coherent(&priv->pdev->dev, uiomem->size,
+ priv->dmem_region_vaddr[dmem_region],
+ uiomem->addr);
+ }
+ uiomem->addr = DMEM_MAP_ERROR;
+ ++dmem_region;
+ ++uiomem;
+ }
+
+ mutex_unlock(&priv->alloc_lock);
+ return 0;
+}
+
+static irqreturn_t uio_dmem_genirq_handler(int irq, struct uio_info *dev_info)
+{
+ struct uio_dmem_genirq_platdata *priv = dev_info->priv;
+
+ /* Just disable the interrupt in the interrupt controller, and
+ * remember the state so we can allow user space to enable it later.
+ */
+
+ if (!test_and_set_bit(0, &priv->flags))
+ disable_irq_nosync(irq);
+
+ return IRQ_HANDLED;
+}
+
+static int uio_dmem_genirq_irqcontrol(struct uio_info *dev_info, s32 irq_on)
+{
+ struct uio_dmem_genirq_platdata *priv = dev_info->priv;
+ unsigned long flags;
+
+ /* Allow user space to enable and disable the interrupt
+ * in the interrupt controller, but keep track of the
+ * state to prevent per-irq depth damage.
+ *
+ * Serialize this operation to support multiple tasks.
+ */
+
+ spin_lock_irqsave(&priv->lock, flags);
+ if (irq_on) {
+ if (test_and_clear_bit(0, &priv->flags))
+ enable_irq(dev_info->irq);
+ } else {
+ if (!test_and_set_bit(0, &priv->flags))
+ disable_irq(dev_info->irq);
+ }
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ return 0;
+}
+
+static int uio_dmem_genirq_probe(struct platform_device *pdev)
+{
+ struct uio_dmem_genirq_pdata *pdata = pdev->dev.platform_data;
+ struct uio_info *uioinfo = &pdata->uioinfo;
+ struct uio_dmem_genirq_platdata *priv;
+ struct uio_mem *uiomem;
+ int ret = -EINVAL;
+ int i;
+
+ if (pdev->dev.of_node) {
+ int irq;
+
+ /* alloc uioinfo for one device */
+ uioinfo = kzalloc(sizeof(*uioinfo), GFP_KERNEL);
+ if (!uioinfo) {
+ ret = -ENOMEM;
+ dev_err(&pdev->dev, "unable to kmalloc\n");
+ goto bad2;
+ }
+ uioinfo->name = pdev->dev.of_node->name;
+ uioinfo->version = "devicetree";
+
+ /* Multiple IRQs are not supported */
+ irq = platform_get_irq(pdev, 0);
+ if (irq == -ENXIO)
+ uioinfo->irq = UIO_IRQ_NONE;
+ else
+ uioinfo->irq = irq;
+ }
+
+ if (!uioinfo || !uioinfo->name || !uioinfo->version) {
+ dev_err(&pdev->dev, "missing platform_data\n");
+ goto bad0;
+ }
+
+ if (uioinfo->handler || uioinfo->irqcontrol ||
+ uioinfo->irq_flags & IRQF_SHARED) {
+ dev_err(&pdev->dev, "interrupt configuration error\n");
+ goto bad0;
+ }
+
+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+ if (!priv) {
+ ret = -ENOMEM;
+ dev_err(&pdev->dev, "unable to kmalloc\n");
+ goto bad0;
+ }
+
+ dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
+
+ priv->uioinfo = uioinfo;
+ spin_lock_init(&priv->lock);
+ priv->flags = 0; /* interrupt is enabled to begin with */
+ priv->pdev = pdev;
+ mutex_init(&priv->alloc_lock);
+
+ if (!uioinfo->irq) {
+ ret = platform_get_irq(pdev, 0);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed to get IRQ\n");
+ goto bad0;
+ }
+ uioinfo->irq = ret;
+ }
+ uiomem = &uioinfo->mem[0];
+
+ for (i = 0; i < pdev->num_resources; ++i) {
+ struct resource *r = &pdev->resource[i];
+
+ if (r->flags != IORESOURCE_MEM)
+ continue;
+
+ if (uiomem >= &uioinfo->mem[MAX_UIO_MAPS]) {
+ dev_warn(&pdev->dev, "device has more than "
+ __stringify(MAX_UIO_MAPS)
+ " I/O memory resources.\n");
+ break;
+ }
+
+ uiomem->memtype = UIO_MEM_PHYS;
+ uiomem->addr = r->start;
+ uiomem->size = resource_size(r);
+ ++uiomem;
+ }
+
+ priv->dmem_region_start = i;
+ priv->num_dmem_regions = pdata->num_dynamic_regions;
+
+ for (i = 0; i < pdata->num_dynamic_regions; ++i) {
+ if (uiomem >= &uioinfo->mem[MAX_UIO_MAPS]) {
+ dev_warn(&pdev->dev, "device has more than "
+ __stringify(MAX_UIO_MAPS)
+ " dynamic and fixed memory regions.\n");
+ break;
+ }
+ uiomem->memtype = UIO_MEM_PHYS;
+ uiomem->addr = DMEM_MAP_ERROR;
+ uiomem->size = pdata->dynamic_region_sizes[i];
+ ++uiomem;
+ }
+
+ while (uiomem < &uioinfo->mem[MAX_UIO_MAPS]) {
+ uiomem->size = 0;
+ ++uiomem;
+ }
+
+ /* This driver requires no hardware specific kernel code to handle
+ * interrupts. Instead, the interrupt handler simply disables the
+ * interrupt in the interrupt controller. User space is responsible
+ * for performing hardware specific acknowledge and re-enabling of
+ * the interrupt in the interrupt controller.
+ *
+ * Interrupt sharing is not supported.
+ */
+
+ uioinfo->handler = uio_dmem_genirq_handler;
+ uioinfo->irqcontrol = uio_dmem_genirq_irqcontrol;
+ uioinfo->open = uio_dmem_genirq_open;
+ uioinfo->release = uio_dmem_genirq_release;
+ uioinfo->priv = priv;
+
+ /* Enable Runtime PM for this device:
+ * The device starts in suspended state to allow the hardware to be
+ * turned off by default. The Runtime PM bus code should power on the
+ * hardware and enable clocks at open().
+ */
+ pm_runtime_enable(&pdev->dev);
+
+ ret = uio_register_device(&pdev->dev, priv->uioinfo);
+ if (ret) {
+ dev_err(&pdev->dev, "unable to register uio device\n");
+ goto bad1;
+ }
+
+ platform_set_drvdata(pdev, priv);
+ return 0;
+ bad1:
+ kfree(priv);
+ pm_runtime_disable(&pdev->dev);
+ bad0:
+ /* kfree uioinfo for OF */
+ if (pdev->dev.of_node)
+ kfree(uioinfo);
+ bad2:
+ return ret;
+}
+
+static int uio_dmem_genirq_remove(struct platform_device *pdev)
+{
+ struct uio_dmem_genirq_platdata *priv = platform_get_drvdata(pdev);
+
+ uio_unregister_device(priv->uioinfo);
+ pm_runtime_disable(&pdev->dev);
+
+ priv->uioinfo->handler = NULL;
+ priv->uioinfo->irqcontrol = NULL;
+
+ /* kfree uioinfo for OF */
+ if (pdev->dev.of_node)
+ kfree(priv->uioinfo);
+
+ kfree(priv);
+ return 0;
+}
+
+static int uio_dmem_genirq_runtime_nop(struct device *dev)
+{
+ /* Runtime PM callback shared between ->runtime_suspend()
+ * and ->runtime_resume(). Simply returns success.
+ *
+ * In this driver pm_runtime_get_sync() and pm_runtime_put_sync()
+ * are used at open() and release() time. This allows the
+ * Runtime PM code to turn off power to the device while the
+ * device is unused, ie before open() and after release().
+ *
+ * This Runtime PM callback does not need to save or restore
+ * any registers since user space is responsbile for hardware
+ * register reinitialization after open().
+ */
+ return 0;
+}
+
+static const struct dev_pm_ops uio_dmem_genirq_dev_pm_ops = {
+ .runtime_suspend = uio_dmem_genirq_runtime_nop,
+ .runtime_resume = uio_dmem_genirq_runtime_nop,
+};
+
+#ifdef CONFIG_OF
+static const struct of_device_id uio_of_genirq_match[] = {
+ { /* empty for now */ },
+};
+MODULE_DEVICE_TABLE(of, uio_of_genirq_match);
+#else
+# define uio_of_genirq_match NULL
+#endif
+
+static struct platform_driver uio_dmem_genirq = {
+ .probe = uio_dmem_genirq_probe,
+ .remove = uio_dmem_genirq_remove,
+ .driver = {
+ .name = DRIVER_NAME,
+ .owner = THIS_MODULE,
+ .pm = &uio_dmem_genirq_dev_pm_ops,
+ .of_match_table = uio_of_genirq_match,
+ },
+};
+
+module_platform_driver(uio_dmem_genirq);
+
+MODULE_AUTHOR("Damian Hobson-Garcia");
+MODULE_DESCRIPTION("Userspace I/O platform driver with dynamic memory.");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:" DRIVER_NAME);
diff --git a/drivers/uio/uio_netx.c b/drivers/uio/uio_netx.c
index a879fd5..6a4ba5e 100644
--- a/drivers/uio/uio_netx.c
+++ b/drivers/uio/uio_netx.c
@@ -48,7 +48,7 @@
return IRQ_HANDLED;
}
-static int __devinit netx_pci_probe(struct pci_dev *dev,
+static int netx_pci_probe(struct pci_dev *dev,
const struct pci_device_id *id)
{
struct uio_info *info;
diff --git a/drivers/uio/uio_pci_generic.c b/drivers/uio/uio_pci_generic.c
index 0bd08ef..14aa10c 100644
--- a/drivers/uio/uio_pci_generic.c
+++ b/drivers/uio/uio_pci_generic.c
@@ -53,7 +53,7 @@
return IRQ_HANDLED;
}
-static int __devinit probe(struct pci_dev *pdev,
+static int probe(struct pci_dev *pdev,
const struct pci_device_id *id)
{
struct uio_pci_generic_dev *gdev;
diff --git a/drivers/uio/uio_pdrv.c b/drivers/uio/uio_pdrv.c
index 72d3646..39be9e0 100644
--- a/drivers/uio/uio_pdrv.c
+++ b/drivers/uio/uio_pdrv.c
@@ -60,6 +60,7 @@
uiomem->memtype = UIO_MEM_PHYS;
uiomem->addr = r->start;
uiomem->size = resource_size(r);
+ uiomem->name = r->name;
++uiomem;
}
diff --git a/drivers/uio/uio_pdrv_genirq.c b/drivers/uio/uio_pdrv_genirq.c
index 42202cd..c122bca 100644
--- a/drivers/uio/uio_pdrv_genirq.c
+++ b/drivers/uio/uio_pdrv_genirq.c
@@ -102,7 +102,7 @@
int ret = -EINVAL;
int i;
- if (!uioinfo) {
+ if (pdev->dev.of_node) {
int irq;
/* alloc uioinfo for one device */
@@ -172,6 +172,7 @@
uiomem->memtype = UIO_MEM_PHYS;
uiomem->addr = r->start;
uiomem->size = resource_size(r);
+ uiomem->name = r->name;
++uiomem;
}
diff --git a/drivers/uio/uio_pruss.c b/drivers/uio/uio_pruss.c
index 33a7a27..cce0f78 100644
--- a/drivers/uio/uio_pruss.c
+++ b/drivers/uio/uio_pruss.c
@@ -112,7 +112,7 @@
kfree(gdev);
}
-static int __devinit pruss_probe(struct platform_device *dev)
+static int pruss_probe(struct platform_device *dev)
{
struct uio_info *p;
struct uio_pruss_dev *gdev;
@@ -209,7 +209,7 @@
return ret;
}
-static int __devexit pruss_remove(struct platform_device *dev)
+static int pruss_remove(struct platform_device *dev)
{
struct uio_pruss_dev *gdev = platform_get_drvdata(dev);
@@ -220,7 +220,7 @@
static struct platform_driver pruss_driver = {
.probe = pruss_probe,
- .remove = __devexit_p(pruss_remove),
+ .remove = pruss_remove,
.driver = {
.name = DRV_NAME,
.owner = THIS_MODULE,
diff --git a/drivers/uio/uio_sercos3.c b/drivers/uio/uio_sercos3.c
index a187fa1..81a10a5 100644
--- a/drivers/uio/uio_sercos3.c
+++ b/drivers/uio/uio_sercos3.c
@@ -116,7 +116,7 @@
return 0;
}
-static int __devinit sercos3_pci_probe(struct pci_dev *dev,
+static int sercos3_pci_probe(struct pci_dev *dev,
const struct pci_device_id *id)
{
struct uio_info *info;
@@ -197,7 +197,7 @@
kfree(info);
}
-static struct pci_device_id sercos3_pci_ids[] __devinitdata = {
+static struct pci_device_id sercos3_pci_ids[] = {
{
.vendor = PCI_VENDOR_ID_PLX,
.device = PCI_DEVICE_ID_PLX_9030,
diff --git a/drivers/usb/c67x00/c67x00-drv.c b/drivers/usb/c67x00/c67x00-drv.c
index 6f3b6e2..fe815ec 100644
--- a/drivers/usb/c67x00/c67x00-drv.c
+++ b/drivers/usb/c67x00/c67x00-drv.c
@@ -116,7 +116,7 @@
/* ------------------------------------------------------------------------- */
-static int __devinit c67x00_drv_probe(struct platform_device *pdev)
+static int c67x00_drv_probe(struct platform_device *pdev)
{
struct c67x00_device *c67x00;
struct c67x00_platform_data *pdata;
@@ -191,7 +191,7 @@
return ret;
}
-static int __devexit c67x00_drv_remove(struct platform_device *pdev)
+static int c67x00_drv_remove(struct platform_device *pdev)
{
struct c67x00_device *c67x00 = platform_get_drvdata(pdev);
struct resource *res;
@@ -219,7 +219,7 @@
static struct platform_driver c67x00_driver = {
.probe = c67x00_drv_probe,
- .remove = __devexit_p(c67x00_drv_remove),
+ .remove = c67x00_drv_remove,
.driver = {
.owner = THIS_MODULE,
.name = "c67x00",
diff --git a/drivers/usb/chipidea/Kconfig b/drivers/usb/chipidea/Kconfig
index 1ea932a..608a2ae 100644
--- a/drivers/usb/chipidea/Kconfig
+++ b/drivers/usb/chipidea/Kconfig
@@ -20,6 +20,7 @@
config USB_CHIPIDEA_HOST
bool "ChipIdea host controller"
depends on USB=y || USB=USB_CHIPIDEA
+ depends on USB_EHCI_HCD
select USB_EHCI_ROOT_HUB_TT
help
Say Y here to enable host controller functionality of the
diff --git a/drivers/usb/chipidea/ci13xxx_imx.c b/drivers/usb/chipidea/ci13xxx_imx.c
index 0f5ca4b..8c29122 100644
--- a/drivers/usb/chipidea/ci13xxx_imx.c
+++ b/drivers/usb/chipidea/ci13xxx_imx.c
@@ -85,7 +85,7 @@
/* End of common functions shared by usbmisc drivers*/
-static struct ci13xxx_platform_data ci13xxx_imx_platdata __devinitdata = {
+static struct ci13xxx_platform_data ci13xxx_imx_platdata = {
.name = "ci13xxx_imx",
.flags = CI13XXX_REQUIRE_TRANSCEIVER |
CI13XXX_PULLUP_ON_VBUS |
@@ -93,7 +93,7 @@
.capoffset = DEF_CAPOFFSET,
};
-static int __devinit ci13xxx_imx_probe(struct platform_device *pdev)
+static int ci13xxx_imx_probe(struct platform_device *pdev)
{
struct ci13xxx_imx_data *data;
struct platform_device *plat_ci, *phy_pdev;
@@ -220,7 +220,7 @@
return ret;
}
-static int __devexit ci13xxx_imx_remove(struct platform_device *pdev)
+static int ci13xxx_imx_remove(struct platform_device *pdev)
{
struct ci13xxx_imx_data *data = platform_get_drvdata(pdev);
@@ -252,7 +252,7 @@
static struct platform_driver ci13xxx_imx_driver = {
.probe = ci13xxx_imx_probe,
- .remove = __devexit_p(ci13xxx_imx_remove),
+ .remove = ci13xxx_imx_remove,
.driver = {
.name = "imx_usb",
.owner = THIS_MODULE,
diff --git a/drivers/usb/chipidea/ci13xxx_msm.c b/drivers/usb/chipidea/ci13xxx_msm.c
index b01feb3..7d16681 100644
--- a/drivers/usb/chipidea/ci13xxx_msm.c
+++ b/drivers/usb/chipidea/ci13xxx_msm.c
@@ -55,7 +55,7 @@
.notify_event = ci13xxx_msm_notify_event,
};
-static int __devinit ci13xxx_msm_probe(struct platform_device *pdev)
+static int ci13xxx_msm_probe(struct platform_device *pdev)
{
struct platform_device *plat_ci;
@@ -77,7 +77,7 @@
return 0;
}
-static int __devexit ci13xxx_msm_remove(struct platform_device *pdev)
+static int ci13xxx_msm_remove(struct platform_device *pdev)
{
struct platform_device *plat_ci = platform_get_drvdata(pdev);
@@ -89,7 +89,7 @@
static struct platform_driver ci13xxx_msm_driver = {
.probe = ci13xxx_msm_probe,
- .remove = __devexit_p(ci13xxx_msm_remove),
+ .remove = ci13xxx_msm_remove,
.driver = { .name = "msm_hsusb", },
};
diff --git a/drivers/usb/chipidea/ci13xxx_pci.c b/drivers/usb/chipidea/ci13xxx_pci.c
index 918e149..9b227e3 100644
--- a/drivers/usb/chipidea/ci13xxx_pci.c
+++ b/drivers/usb/chipidea/ci13xxx_pci.c
@@ -48,7 +48,7 @@
* Allocates basic PCI resources for this USB device controller, and then
* invokes the udc_probe() method to start the UDC associated with it
*/
-static int __devinit ci13xxx_pci_probe(struct pci_dev *pdev,
+static int ci13xxx_pci_probe(struct pci_dev *pdev,
const struct pci_device_id *id)
{
struct ci13xxx_platform_data *platdata = (void *)id->driver_data;
@@ -107,7 +107,7 @@
* first invoking the udc_remove() and then releases
* all PCI resources allocated for this USB device controller
*/
-static void __devexit ci13xxx_pci_remove(struct pci_dev *pdev)
+static void ci13xxx_pci_remove(struct pci_dev *pdev)
{
struct platform_device *plat_ci = pci_get_drvdata(pdev);
@@ -147,7 +147,7 @@
.name = UDC_DRIVER_NAME,
.id_table = ci13xxx_pci_id_table,
.probe = ci13xxx_pci_probe,
- .remove = __devexit_p(ci13xxx_pci_remove),
+ .remove = ci13xxx_pci_remove,
};
module_pci_driver(ci13xxx_pci_driver);
diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
index f69d029..aebf695 100644
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@@ -385,12 +385,13 @@
void ci13xxx_remove_device(struct platform_device *pdev)
{
+ int id = pdev->id;
platform_device_unregister(pdev);
- ida_simple_remove(&ci_ida, pdev->id);
+ ida_simple_remove(&ci_ida, id);
}
EXPORT_SYMBOL_GPL(ci13xxx_remove_device);
-static int __devinit ci_hdrc_probe(struct platform_device *pdev)
+static int ci_hdrc_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct ci13xxx *ci;
@@ -508,7 +509,7 @@
return ret;
}
-static int __devexit ci_hdrc_remove(struct platform_device *pdev)
+static int ci_hdrc_remove(struct platform_device *pdev)
{
struct ci13xxx *ci = platform_get_drvdata(pdev);
@@ -523,7 +524,7 @@
static struct platform_driver ci_hdrc_driver = {
.probe = ci_hdrc_probe,
- .remove = __devexit_p(ci_hdrc_remove),
+ .remove = ci_hdrc_remove,
.driver = {
.name = "ci_hdrc",
},
diff --git a/drivers/usb/chipidea/debug.c b/drivers/usb/chipidea/debug.c
index c6f50a2..3bc244d 100644
--- a/drivers/usb/chipidea/debug.c
+++ b/drivers/usb/chipidea/debug.c
@@ -160,9 +160,6 @@
gadget->speed);
n += scnprintf(buf + n, PAGE_SIZE - n, "max_speed = %d\n",
gadget->max_speed);
- /* TODO: Scheduled for removal in 3.8. */
- n += scnprintf(buf + n, PAGE_SIZE - n, "is_dualspeed = %d\n",
- gadget_is_dualspeed(gadget));
n += scnprintf(buf + n, PAGE_SIZE - n, "is_otg = %d\n",
gadget->is_otg);
n += scnprintf(buf + n, PAGE_SIZE - n, "is_a_peripheral = %d\n",
diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c
index ebff9f4..caecad9 100644
--- a/drivers/usb/chipidea/host.c
+++ b/drivers/usb/chipidea/host.c
@@ -20,77 +20,18 @@
*/
#include <linux/kernel.h>
+#include <linux/io.h>
#include <linux/usb.h>
#include <linux/usb/hcd.h>
#include <linux/usb/chipidea.h>
-#define CHIPIDEA_EHCI
-#include "../host/ehci-hcd.c"
+#include "../host/ehci.h"
#include "ci.h"
#include "bits.h"
#include "host.h"
-static int ci_ehci_setup(struct usb_hcd *hcd)
-{
- struct ehci_hcd *ehci = hcd_to_ehci(hcd);
- int ret;
-
- hcd->has_tt = 1;
-
- ret = ehci_setup(hcd);
- if (ret)
- return ret;
-
- ehci_port_power(ehci, 0);
-
- return ret;
-}
-
-static const struct hc_driver ci_ehci_hc_driver = {
- .description = "ehci_hcd",
- .product_desc = "ChipIdea HDRC EHCI",
- .hcd_priv_size = sizeof(struct ehci_hcd),
-
- /*
- * generic hardware linkage
- */
- .irq = ehci_irq,
- .flags = HCD_MEMORY | HCD_USB2,
-
- /*
- * basic lifecycle operations
- */
- .reset = ci_ehci_setup,
- .start = ehci_run,
- .stop = ehci_stop,
- .shutdown = ehci_shutdown,
-
- /*
- * managing i/o requests and associated device resources
- */
- .urb_enqueue = ehci_urb_enqueue,
- .urb_dequeue = ehci_urb_dequeue,
- .endpoint_disable = ehci_endpoint_disable,
- .endpoint_reset = ehci_endpoint_reset,
-
- /*
- * scheduling support
- */
- .get_frame_number = ehci_get_frame,
-
- /*
- * root hub support
- */
- .hub_status_data = ehci_hub_status_data,
- .hub_control = ehci_hub_control,
- .bus_suspend = ehci_bus_suspend,
- .bus_resume = ehci_bus_resume,
- .relinquish_port = ehci_relinquish_port,
- .port_handed_over = ehci_port_handed_over,
-
- .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
-};
+static struct hc_driver __read_mostly ci_ehci_hc_driver;
static irqreturn_t host_irq(struct ci13xxx *ci)
{
@@ -157,5 +98,7 @@
rdrv->name = "host";
ci->roles[CI_ROLE_HOST] = rdrv;
+ ehci_init_driver(&ci_ehci_hc_driver, NULL);
+
return 0;
}
diff --git a/drivers/usb/chipidea/usbmisc_imx6q.c b/drivers/usb/chipidea/usbmisc_imx6q.c
index 416e3fc..845efe2 100644
--- a/drivers/usb/chipidea/usbmisc_imx6q.c
+++ b/drivers/usb/chipidea/usbmisc_imx6q.c
@@ -82,7 +82,7 @@
{ /* sentinel */ }
};
-static int __devinit usbmisc_imx6q_probe(struct platform_device *pdev)
+static int usbmisc_imx6q_probe(struct platform_device *pdev)
{
struct resource *res;
struct imx6q_usbmisc *data;
@@ -127,7 +127,7 @@
return 0;
}
-static int __devexit usbmisc_imx6q_remove(struct platform_device *pdev)
+static int usbmisc_imx6q_remove(struct platform_device *pdev)
{
usbmisc_unset_ops(&imx6q_usbmisc_ops);
clk_disable_unprepare(usbmisc->clk);
@@ -136,7 +136,7 @@
static struct platform_driver usbmisc_imx6q_driver = {
.probe = usbmisc_imx6q_probe,
- .remove = __devexit_p(usbmisc_imx6q_remove),
+ .remove = usbmisc_imx6q_remove,
.driver = {
.name = "usbmisc_imx6q",
.owner = THIS_MODULE,
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 6e49ec6..8d809a8 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -787,6 +787,10 @@
tmp.flags = ASYNC_LOW_LATENCY;
tmp.xmit_fifo_size = acm->writesize;
tmp.baud_base = le32_to_cpu(acm->line.dwDTERate);
+ tmp.close_delay = acm->port.close_delay / 10;
+ tmp.closing_wait = acm->port.closing_wait == ASYNC_CLOSING_WAIT_NONE ?
+ ASYNC_CLOSING_WAIT_NONE :
+ acm->port.closing_wait / 10;
if (copy_to_user(info, &tmp, sizeof(tmp)))
return -EFAULT;
@@ -794,6 +798,37 @@
return 0;
}
+static int set_serial_info(struct acm *acm,
+ struct serial_struct __user *newinfo)
+{
+ struct serial_struct new_serial;
+ unsigned int closing_wait, close_delay;
+ int retval = 0;
+
+ if (copy_from_user(&new_serial, newinfo, sizeof(new_serial)))
+ return -EFAULT;
+
+ close_delay = new_serial.close_delay * 10;
+ closing_wait = new_serial.closing_wait == ASYNC_CLOSING_WAIT_NONE ?
+ ASYNC_CLOSING_WAIT_NONE : new_serial.closing_wait * 10;
+
+ mutex_lock(&acm->port.mutex);
+
+ if (!capable(CAP_SYS_ADMIN)) {
+ if ((close_delay != acm->port.close_delay) ||
+ (closing_wait != acm->port.closing_wait))
+ retval = -EPERM;
+ else
+ retval = -EOPNOTSUPP;
+ } else {
+ acm->port.close_delay = close_delay;
+ acm->port.closing_wait = closing_wait;
+ }
+
+ mutex_unlock(&acm->port.mutex);
+ return retval;
+}
+
static int acm_tty_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg)
{
@@ -804,6 +839,9 @@
case TIOCGSERIAL: /* gets serial port data */
rv = get_serial_info(acm, (struct serial_struct __user *) arg);
break;
+ case TIOCSSERIAL:
+ rv = set_serial_info(acm, (struct serial_struct __user *) arg);
+ break;
}
return rv;
diff --git a/drivers/usb/core/devices.c b/drivers/usb/core/devices.c
index f460de3..cbacea9 100644
--- a/drivers/usb/core/devices.c
+++ b/drivers/usb/core/devices.c
@@ -591,16 +591,14 @@
/* Now look at all of this device's children. */
usb_hub_for_each_child(usbdev, chix, childdev) {
- if (childdev) {
- usb_lock_device(childdev);
- ret = usb_device_dump(buffer, nbytes, skip_bytes,
- file_offset, childdev, bus,
- level + 1, chix - 1, ++cnt);
- usb_unlock_device(childdev);
- if (ret == -EFAULT)
- return total_written;
- total_written += ret;
- }
+ usb_lock_device(childdev);
+ ret = usb_device_dump(buffer, nbytes, skip_bytes,
+ file_offset, childdev, bus,
+ level + 1, chix - 1, ++cnt);
+ usb_unlock_device(childdev);
+ if (ret == -EFAULT)
+ return total_written;
+ total_written += ret;
}
return total_written;
}
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index 6056db7..88dde95 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -32,8 +32,6 @@
#include "usb.h"
-#ifdef CONFIG_HOTPLUG
-
/*
* Adds a new dynamic USBdevice ID to this driver,
* and cause the driver to probe for all devices again.
@@ -194,20 +192,6 @@
}
spin_unlock(&usb_drv->dynids.lock);
}
-#else
-static inline int usb_create_newid_files(struct usb_driver *usb_drv)
-{
- return 0;
-}
-
-static void usb_remove_newid_files(struct usb_driver *usb_drv)
-{
-}
-
-static inline void usb_free_dynids(struct usb_driver *usb_drv)
-{
-}
-#endif
static const struct usb_device_id *usb_match_dynamic_id(struct usb_interface *intf,
struct usb_driver *drv)
@@ -790,7 +774,6 @@
return 0;
}
-#ifdef CONFIG_HOTPLUG
static int usb_uevent(struct device *dev, struct kobj_uevent_env *env)
{
struct usb_device *usb_dev;
@@ -832,14 +815,6 @@
return 0;
}
-#else
-
-static int usb_uevent(struct device *dev, struct kobj_uevent_env *env)
-{
- return -ENODEV;
-}
-#endif /* CONFIG_HOTPLUG */
-
/**
* usb_register_device_driver - register a USB device (not interface) driver
* @new_udriver: USB operations for the device driver
diff --git a/drivers/usb/core/generic.c b/drivers/usb/core/generic.c
index 69ecd3c..eff2010 100644
--- a/drivers/usb/core/generic.c
+++ b/drivers/usb/core/generic.c
@@ -47,6 +47,9 @@
int insufficient_power = 0;
struct usb_host_config *c, *best;
+ if (usb_device_is_owned(udev))
+ return 0;
+
best = NULL;
c = udev->config;
num_configs = udev->descriptor.bNumConfigurations;
@@ -160,9 +163,7 @@
/* Choose and set the configuration. This registers the interfaces
* with the driver core and lets interface drivers bind to them.
*/
- if (usb_device_is_owned(udev))
- ; /* Don't configure if the device is owned */
- else if (udev->authorized == 0)
+ if (udev->authorized == 0)
dev_err(&udev->dev, "Device is not authorized for usage\n");
else {
c = usb_choose_configuration(udev);
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index f034716..4225d5e 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -2039,8 +2039,9 @@
status = hcd->driver->bus_resume(hcd);
clear_bit(HCD_FLAG_WAKEUP_PENDING, &hcd->flags);
if (status == 0) {
- /* TRSMRCY = 10 msec */
- msleep(10);
+ struct usb_device *udev;
+ int port1;
+
spin_lock_irq(&hcd_root_hub_lock);
if (!HCD_DEAD(hcd)) {
usb_set_device_state(rhdev, rhdev->actconfig
@@ -2050,6 +2051,20 @@
hcd->state = HC_STATE_RUNNING;
}
spin_unlock_irq(&hcd_root_hub_lock);
+
+ /*
+ * Check whether any of the enabled ports on the root hub are
+ * unsuspended. If they are then a TRSMRCY delay is needed
+ * (this is what the USB-2 spec calls a "global resume").
+ * Otherwise we can skip the delay.
+ */
+ usb_hub_for_each_child(rhdev, port1, udev) {
+ if (udev->state != USB_STATE_NOTATTACHED &&
+ !udev->port_is_suspended) {
+ usleep_range(10000, 11000); /* TRSMRCY */
+ break;
+ }
+ }
} else {
hcd->state = old_state;
dev_dbg(&rhdev->dev, "bus %s fail, err %d\n",
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 1af04bd..a815fd2 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -39,6 +39,9 @@
#endif
#endif
+#define USB_VENDOR_GENESYS_LOGIC 0x05e3
+#define HUB_QUIRK_CHECK_PORT_AUTOSUSPEND 0x01
+
struct usb_port {
struct usb_device *child;
struct device dev;
@@ -86,6 +89,8 @@
unsigned quiescing:1;
unsigned disconnected:1;
+ unsigned quirk_check_port_auto_suspend:1;
+
unsigned has_indicators:1;
u8 indicator[USB_MAXCHILDREN];
struct delayed_work leds;
@@ -736,7 +741,6 @@
struct usb_hub *hub =
container_of(work, struct usb_hub, tt.clear_work);
unsigned long flags;
- int limit = 100;
spin_lock_irqsave (&hub->tt.lock, flags);
while (!list_empty(&hub->tt.clear_list)) {
@@ -746,9 +750,6 @@
const struct hc_driver *drv;
int status;
- if (!hub->quiescing && --limit < 0)
- break;
-
next = hub->tt.clear_list.next;
clear = list_entry (next, struct usb_tt_clear, clear_list);
list_del (&clear->clear_list);
@@ -1612,6 +1613,41 @@
desc = intf->cur_altsetting;
hdev = interface_to_usbdev(intf);
+ /*
+ * Set default autosuspend delay as 0 to speedup bus suspend,
+ * based on the below considerations:
+ *
+ * - Unlike other drivers, the hub driver does not rely on the
+ * autosuspend delay to provide enough time to handle a wakeup
+ * event, and the submitted status URB is just to check future
+ * change on hub downstream ports, so it is safe to do it.
+ *
+ * - The patch might cause one or more auto supend/resume for
+ * below very rare devices when they are plugged into hub
+ * first time:
+ *
+ * devices having trouble initializing, and disconnect
+ * themselves from the bus and then reconnect a second
+ * or so later
+ *
+ * devices just for downloading firmware, and disconnects
+ * themselves after completing it
+ *
+ * For these quite rare devices, their drivers may change the
+ * autosuspend delay of their parent hub in the probe() to one
+ * appropriate value to avoid the subtle problem if someone
+ * does care it.
+ *
+ * - The patch may cause one or more auto suspend/resume on
+ * hub during running 'lsusb', but it is probably too
+ * infrequent to worry about.
+ *
+ * - Change autosuspend delay of hub can avoid unnecessary auto
+ * suspend timer for hub, also may decrease power consumption
+ * of USB bus.
+ */
+ pm_runtime_set_autosuspend_delay(&hdev->dev, 0);
+
/* Hubs have proper suspend/resume support. */
usb_enable_autosuspend(hdev);
@@ -1670,6 +1706,9 @@
if (hdev->speed == USB_SPEED_HIGH)
highspeed_hubs++;
+ if (id->driver_info & HUB_QUIRK_CHECK_PORT_AUTOSUSPEND)
+ hub->quirk_check_port_auto_suspend = 1;
+
if (hub_configure(hub, endpoint) >= 0)
return 0;
@@ -2012,7 +2051,7 @@
{
if (!string)
return;
- dev_printk(KERN_INFO, &udev->dev, "%s: %s\n", id, string);
+ dev_info(&udev->dev, "%s: %s\n", id, string);
}
static void announce_device(struct usb_device *udev)
@@ -2879,6 +2918,7 @@
(PMSG_IS_AUTO(msg) ? "auto-" : ""),
udev->do_remote_wakeup);
usb_set_device_state(udev, USB_STATE_SUSPENDED);
+ udev->port_is_suspended = 1;
msleep(10);
}
usb_mark_last_busy(hub->hdev);
@@ -3043,6 +3083,7 @@
SuspendCleared:
if (status == 0) {
+ udev->port_is_suspended = 0;
if (hub_is_superspeed(hub->hdev)) {
if (portchange & USB_PORT_STAT_C_LINK_STATE)
clear_port_feature(hub->hdev, port1,
@@ -3126,6 +3167,21 @@
#endif
+static int check_ports_changed(struct usb_hub *hub)
+{
+ int port1;
+
+ for (port1 = 1; port1 <= hub->hdev->maxchild; ++port1) {
+ u16 portstatus, portchange;
+ int status;
+
+ status = hub_port_status(hub, port1, &portstatus, &portchange);
+ if (!status && portchange)
+ return 1;
+ }
+ return 0;
+}
+
static int hub_suspend(struct usb_interface *intf, pm_message_t msg)
{
struct usb_hub *hub = usb_get_intfdata (intf);
@@ -3144,6 +3200,16 @@
return -EBUSY;
}
}
+
+ if (hdev->do_remote_wakeup && hub->quirk_check_port_auto_suspend) {
+ /* check if there are changes pending on hub ports */
+ if (check_ports_changed(hub)) {
+ if (PMSG_IS_AUTO(msg))
+ return -EBUSY;
+ pm_wakeup_event(&hdev->dev, 2000);
+ }
+ }
+
if (hub_is_superspeed(hdev) && hdev->do_remote_wakeup) {
/* Enable hub to send remote wakeup for all ports. */
for (port1 = 1; port1 <= hdev->maxchild; port1++) {
@@ -3972,6 +4038,9 @@
if (retval)
goto fail;
+ if (hcd->phy && !hdev->parent)
+ usb_phy_notify_connect(hcd->phy, udev->speed);
+
/*
* Some superspeed devices have finished the link training process
* and attached to a superspeed hub port, but the device descriptor
@@ -4166,8 +4235,12 @@
}
/* Disconnect any existing devices under this port */
- if (udev)
+ if (udev) {
+ if (hcd->phy && !hdev->parent &&
+ !(portstatus & USB_PORT_STAT_CONNECTION))
+ usb_phy_notify_disconnect(hcd->phy, udev->speed);
usb_disconnect(&hub->ports[port1 - 1]->child);
+ }
clear_bit(port1, hub->change_bits);
/* We can forget about a "removed" device when there's a physical
@@ -4190,13 +4263,6 @@
}
}
- if (hcd->phy && !hdev->parent) {
- if (portstatus & USB_PORT_STAT_CONNECTION)
- usb_phy_notify_connect(hcd->phy, port1);
- else
- usb_phy_notify_disconnect(hcd->phy, port1);
- }
-
/* Return now if debouncing failed or nothing is connected or
* the device was "removed".
*/
@@ -4648,6 +4714,11 @@
}
static const struct usb_device_id hub_id_table[] = {
+ { .match_flags = USB_DEVICE_ID_MATCH_VENDOR
+ | USB_DEVICE_ID_MATCH_INT_CLASS,
+ .idVendor = USB_VENDOR_GENESYS_LOGIC,
+ .bInterfaceClass = USB_CLASS_HUB,
+ .driver_info = HUB_QUIRK_CHECK_PORT_AUTOSUSPEND},
{ .match_flags = USB_DEVICE_ID_MATCH_DEV_CLASS,
.bDeviceClass = USB_CLASS_HUB},
{ .match_flags = USB_DEVICE_ID_MATCH_INT_CLASS,
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index 1ed5afd..131f736 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -1540,7 +1540,6 @@
kfree(intf);
}
-#ifdef CONFIG_HOTPLUG
static int usb_if_uevent(struct device *dev, struct kobj_uevent_env *env)
{
struct usb_device *usb_dev;
@@ -1575,14 +1574,6 @@
return 0;
}
-#else
-
-static int usb_if_uevent(struct device *dev, struct kobj_uevent_env *env)
-{
- return -ENODEV;
-}
-#endif /* CONFIG_HOTPLUG */
-
struct device_type usb_if_device_type = {
.name = "usb_interface",
.release = usb_release_interface,
@@ -1795,7 +1786,8 @@
if (dev->actconfig && usb_disable_lpm(dev)) {
dev_err(&dev->dev, "%s Failed to disable LPM\n.", __func__);
mutex_unlock(hcd->bandwidth_mutex);
- return -ENOMEM;
+ ret = -ENOMEM;
+ goto free_interfaces;
}
ret = usb_hcd_alloc_bandwidth(dev, cp, NULL, NULL);
if (ret < 0) {
@@ -1806,29 +1798,8 @@
goto free_interfaces;
}
- ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
- USB_REQ_SET_CONFIGURATION, 0, configuration, 0,
- NULL, 0, USB_CTRL_SET_TIMEOUT);
- if (ret < 0) {
- /* All the old state is gone, so what else can we do?
- * The device is probably useless now anyway.
- */
- cp = NULL;
- }
-
- dev->actconfig = cp;
- if (!cp) {
- usb_set_device_state(dev, USB_STATE_ADDRESS);
- usb_hcd_alloc_bandwidth(dev, NULL, NULL, NULL);
- /* Leave LPM disabled while the device is unconfigured. */
- mutex_unlock(hcd->bandwidth_mutex);
- usb_autosuspend_device(dev);
- goto free_interfaces;
- }
- mutex_unlock(hcd->bandwidth_mutex);
- usb_set_device_state(dev, USB_STATE_CONFIGURED);
-
- /* Initialize the new interface structures and the
+ /*
+ * Initialize the new interface structures and the
* hc/hcd/usbcore interface/endpoint state.
*/
for (i = 0; i < nintf; ++i) {
@@ -1872,6 +1843,35 @@
}
kfree(new_interfaces);
+ ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+ USB_REQ_SET_CONFIGURATION, 0, configuration, 0,
+ NULL, 0, USB_CTRL_SET_TIMEOUT);
+ if (ret < 0 && cp) {
+ /*
+ * All the old state is gone, so what else can we do?
+ * The device is probably useless now anyway.
+ */
+ usb_hcd_alloc_bandwidth(dev, NULL, NULL, NULL);
+ for (i = 0; i < nintf; ++i) {
+ usb_disable_interface(dev, cp->interface[i], true);
+ put_device(&cp->interface[i]->dev);
+ cp->interface[i] = NULL;
+ }
+ cp = NULL;
+ }
+
+ dev->actconfig = cp;
+ mutex_unlock(hcd->bandwidth_mutex);
+
+ if (!cp) {
+ usb_set_device_state(dev, USB_STATE_ADDRESS);
+
+ /* Leave LPM disabled while the device is unconfigured. */
+ usb_autosuspend_device(dev);
+ return ret;
+ }
+ usb_set_device_state(dev, USB_STATE_CONFIGURED);
+
if (cp->string == NULL &&
!(dev->quirks & USB_QUIRK_CONFIG_INTF_STRINGS))
cp->string = usb_cache_string(dev, cp->desc.iConfiguration);
diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c
index 9d912bf..e0d9d94 100644
--- a/drivers/usb/core/urb.c
+++ b/drivers/usb/core/urb.c
@@ -214,9 +214,25 @@
* urb->interval is modified to reflect the actual transfer period used
* (normally some power of two units). And for isochronous urbs,
* urb->start_frame is modified to reflect when the URB's transfers were
- * scheduled to start. Not all isochronous transfer scheduling policies
- * will work, but most host controller drivers should easily handle ISO
- * queues going from now until 10-200 msec into the future.
+ * scheduled to start.
+ *
+ * Not all isochronous transfer scheduling policies will work, but most
+ * host controller drivers should easily handle ISO queues going from now
+ * until 10-200 msec into the future. Drivers should try to keep at
+ * least one or two msec of data in the queue; many controllers require
+ * that new transfers start at least 1 msec in the future when they are
+ * added. If the driver is unable to keep up and the queue empties out,
+ * the behavior for new submissions is governed by the URB_ISO_ASAP flag.
+ * If the flag is set, or if the queue is idle, then the URB is always
+ * assigned to the first available (and not yet expired) slot in the
+ * endpoint's schedule. If the flag is not set and the queue is active
+ * then the URB is always assigned to the next slot in the schedule
+ * following the end of the endpoint's previous URB, even if that slot is
+ * in the past. When a packet is assigned in this way to a slot that has
+ * already expired, the packet is not transmitted and the corresponding
+ * usb_iso_packet_descriptor's status field will return -EXDEV. If this
+ * would happen to all the packets in the URB, submission fails with a
+ * -EXDEV error code.
*
* For control endpoints, the synchronous usb_control_msg() call is
* often used (in non-interrupt context) instead of this call.
@@ -305,8 +321,13 @@
struct usb_host_endpoint *ep;
int is_out;
- if (!urb || urb->hcpriv || !urb->complete)
+ if (!urb || !urb->complete)
return -EINVAL;
+ if (urb->hcpriv) {
+ WARN_ONCE(1, "URB %p submitted while active\n", urb);
+ return -EBUSY;
+ }
+
dev = urb->dev;
if ((!dev) || (dev->state < USB_STATE_UNAUTHENTICATED))
return -ENODEV;
diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
index cd8fb44..f81b925 100644
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -233,7 +233,6 @@
kfree(udev);
}
-#ifdef CONFIG_HOTPLUG
static int usb_dev_uevent(struct device *dev, struct kobj_uevent_env *env)
{
struct usb_device *usb_dev;
@@ -249,14 +248,6 @@
return 0;
}
-#else
-
-static int usb_dev_uevent(struct device *dev, struct kobj_uevent_env *env)
-{
- return -ENODEV;
-}
-#endif /* CONFIG_HOTPLUG */
-
#ifdef CONFIG_PM
/* USB device Power-Management thunks.
@@ -370,14 +361,14 @@
struct usb_bus *bus, unsigned port1)
{
struct usb_device *dev;
- struct usb_hcd *usb_hcd = container_of(bus, struct usb_hcd, self);
+ struct usb_hcd *usb_hcd = bus_to_hcd(bus);
unsigned root_hub = 0;
dev = kzalloc(sizeof(*dev), GFP_KERNEL);
if (!dev)
return NULL;
- if (!usb_get_hcd(bus_to_hcd(bus))) {
+ if (!usb_get_hcd(usb_hcd)) {
kfree(dev);
return NULL;
}
diff --git a/drivers/usb/dwc3/Makefile b/drivers/usb/dwc3/Makefile
index d441fe4..4502648 100644
--- a/drivers/usb/dwc3/Makefile
+++ b/drivers/usb/dwc3/Makefile
@@ -27,19 +27,7 @@
##
obj-$(CONFIG_USB_DWC3) += dwc3-omap.o
-
-##
-# REVISIT Samsung Exynos platform needs the clk API which isn't
-# defined on all architectures. If we allow dwc3-exynos.c compile
-# always we will fail the linking phase on those architectures
-# which don't provide clk api implementation and that's unnaceptable.
-#
-# When Samsung's platform start supporting pm_runtime, this check
-# for HAVE_CLK should be removed.
-##
-ifneq ($(CONFIG_HAVE_CLK),)
- obj-$(CONFIG_USB_DWC3) += dwc3-exynos.o
-endif
+obj-$(CONFIG_USB_DWC3) += dwc3-exynos.o
ifneq ($(CONFIG_PCI),)
obj-$(CONFIG_USB_DWC3) += dwc3-pci.o
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index c14ebc9..3a4004a 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -66,45 +66,6 @@
/* -------------------------------------------------------------------------- */
-#define DWC3_DEVS_POSSIBLE 32
-
-static DECLARE_BITMAP(dwc3_devs, DWC3_DEVS_POSSIBLE);
-
-int dwc3_get_device_id(void)
-{
- int id;
-
-again:
- id = find_first_zero_bit(dwc3_devs, DWC3_DEVS_POSSIBLE);
- if (id < DWC3_DEVS_POSSIBLE) {
- int old;
-
- old = test_and_set_bit(id, dwc3_devs);
- if (old)
- goto again;
- } else {
- pr_err("dwc3: no space for new device\n");
- id = -ENOMEM;
- }
-
- return id;
-}
-EXPORT_SYMBOL_GPL(dwc3_get_device_id);
-
-void dwc3_put_device_id(int id)
-{
- int ret;
-
- if (id < 0)
- return;
-
- ret = test_bit(id, dwc3_devs);
- WARN(!ret, "dwc3: ID %d not in use\n", id);
- smp_mb__before_clear_bit();
- clear_bit(id, dwc3_devs);
-}
-EXPORT_SYMBOL_GPL(dwc3_put_device_id);
-
void dwc3_set_mode(struct dwc3 *dwc, u32 mode)
{
u32 reg;
@@ -169,7 +130,6 @@
struct dwc3_event_buffer *evt)
{
dma_free_coherent(dwc->dev, evt->length, evt->buf, evt->dma);
- kfree(evt);
}
/**
@@ -180,12 +140,11 @@
* Returns a pointer to the allocated event buffer structure on success
* otherwise ERR_PTR(errno).
*/
-static struct dwc3_event_buffer *__devinit
-dwc3_alloc_one_event_buffer(struct dwc3 *dwc, unsigned length)
+static struct dwc3_event_buffer *dwc3_alloc_one_event_buffer(struct dwc3 *dwc, unsigned length)
{
struct dwc3_event_buffer *evt;
- evt = kzalloc(sizeof(*evt), GFP_KERNEL);
+ evt = devm_kzalloc(dwc->dev, sizeof(*evt), GFP_KERNEL);
if (!evt)
return ERR_PTR(-ENOMEM);
@@ -193,10 +152,8 @@
evt->length = length;
evt->buf = dma_alloc_coherent(dwc->dev, length,
&evt->dma, GFP_KERNEL);
- if (!evt->buf) {
- kfree(evt);
+ if (!evt->buf)
return ERR_PTR(-ENOMEM);
- }
return evt;
}
@@ -215,8 +172,6 @@
if (evt)
dwc3_free_one_event_buffer(dwc, evt);
}
-
- kfree(dwc->ev_buffs);
}
/**
@@ -227,7 +182,7 @@
* Returns 0 on success otherwise negative errno. In the error case, dwc
* may contain some buffers allocated but not all which were requested.
*/
-static int __devinit dwc3_alloc_event_buffers(struct dwc3 *dwc, unsigned length)
+static int dwc3_alloc_event_buffers(struct dwc3 *dwc, unsigned length)
{
int num;
int i;
@@ -235,7 +190,8 @@
num = DWC3_NUM_INT(dwc->hwparams.hwparams1);
dwc->num_event_buffers = num;
- dwc->ev_buffs = kzalloc(sizeof(*dwc->ev_buffs) * num, GFP_KERNEL);
+ dwc->ev_buffs = devm_kzalloc(dwc->dev, sizeof(*dwc->ev_buffs) * num,
+ GFP_KERNEL);
if (!dwc->ev_buffs) {
dev_err(dwc->dev, "can't allocate event buffers array\n");
return -ENOMEM;
@@ -303,7 +259,7 @@
}
}
-static void __devinit dwc3_cache_hwparams(struct dwc3 *dwc)
+static void dwc3_cache_hwparams(struct dwc3 *dwc)
{
struct dwc3_hwparams *parms = &dwc->hwparams;
@@ -324,7 +280,7 @@
*
* Returns 0 on success otherwise negative errno.
*/
-static int __devinit dwc3_core_init(struct dwc3 *dwc)
+static int dwc3_core_init(struct dwc3 *dwc)
{
unsigned long timeout;
u32 reg;
@@ -358,8 +314,6 @@
dwc3_core_soft_reset(dwc);
- dwc3_cache_hwparams(dwc);
-
reg = dwc3_readl(dwc->regs, DWC3_GCTL);
reg &= ~DWC3_GCTL_SCALEDOWN_MASK;
reg &= ~DWC3_GCTL_DISSCRAMBLE;
@@ -383,24 +337,14 @@
dwc3_writel(dwc->regs, DWC3_GCTL, reg);
- ret = dwc3_alloc_event_buffers(dwc, DWC3_EVENT_BUFFERS_SIZE);
- if (ret) {
- dev_err(dwc->dev, "failed to allocate event buffers\n");
- ret = -ENOMEM;
- goto err1;
- }
-
ret = dwc3_event_buffers_setup(dwc);
if (ret) {
dev_err(dwc->dev, "failed to setup event buffers\n");
- goto err1;
+ goto err0;
}
return 0;
-err1:
- dwc3_free_event_buffers(dwc);
-
err0:
return ret;
}
@@ -408,16 +352,14 @@
static void dwc3_core_exit(struct dwc3 *dwc)
{
dwc3_event_buffers_cleanup(dwc);
- dwc3_free_event_buffers(dwc);
usb_phy_shutdown(dwc->usb2_phy);
usb_phy_shutdown(dwc->usb3_phy);
-
}
#define DWC3_ALIGN_MASK (16 - 1)
-static int __devinit dwc3_probe(struct platform_device *pdev)
+static int dwc3_probe(struct platform_device *pdev)
{
struct device_node *node = pdev->dev.of_node;
struct resource *res;
@@ -515,10 +457,19 @@
pm_runtime_get_sync(dev);
pm_runtime_forbid(dev);
+ dwc3_cache_hwparams(dwc);
+
+ ret = dwc3_alloc_event_buffers(dwc, DWC3_EVENT_BUFFERS_SIZE);
+ if (ret) {
+ dev_err(dwc->dev, "failed to allocate event buffers\n");
+ ret = -ENOMEM;
+ goto err0;
+ }
+
ret = dwc3_core_init(dwc);
if (ret) {
dev_err(dev, "failed to initialize core\n");
- return ret;
+ goto err0;
}
mode = DWC3_MODE(dwc->hwparams.hwparams0);
@@ -590,10 +541,13 @@
err1:
dwc3_core_exit(dwc);
+err0:
+ dwc3_free_event_buffers(dwc);
+
return ret;
}
-static int __devexit dwc3_remove(struct platform_device *pdev)
+static int dwc3_remove(struct platform_device *pdev)
{
struct dwc3 *dwc = platform_get_drvdata(pdev);
struct resource *res;
@@ -628,7 +582,7 @@
static struct platform_driver dwc3_driver = {
.probe = dwc3_probe,
- .remove = __devexit_p(dwc3_remove),
+ .remove = dwc3_remove,
.driver = {
.name = "dwc3",
},
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 243affc..4999563 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -868,7 +868,4 @@
int dwc3_gadget_init(struct dwc3 *dwc);
void dwc3_gadget_exit(struct dwc3 *dwc);
-extern int dwc3_get_device_id(void);
-extern void dwc3_put_device_id(int id);
-
#endif /* __DRIVERS_USB_DWC3_CORE_H */
diff --git a/drivers/usb/dwc3/debugfs.c b/drivers/usb/dwc3/debugfs.c
index d4a30f1..92604b4 100644
--- a/drivers/usb/dwc3/debugfs.c
+++ b/drivers/usb/dwc3/debugfs.c
@@ -652,7 +652,7 @@
.release = single_release,
};
-int __devinit dwc3_debugfs_init(struct dwc3 *dwc)
+int dwc3_debugfs_init(struct dwc3 *dwc)
{
struct dentry *root;
struct dentry *file;
@@ -703,7 +703,7 @@
return ret;
}
-void __devexit dwc3_debugfs_exit(struct dwc3 *dwc)
+void dwc3_debugfs_exit(struct dwc3 *dwc)
{
debugfs_remove_recursive(dwc->root);
dwc->root = NULL;
diff --git a/drivers/usb/dwc3/dwc3-exynos.c b/drivers/usb/dwc3/dwc3-exynos.c
index ca65978..aae5328 100644
--- a/drivers/usb/dwc3/dwc3-exynos.c
+++ b/drivers/usb/dwc3/dwc3-exynos.c
@@ -21,6 +21,7 @@
#include <linux/clk.h>
#include <linux/usb/otg.h>
#include <linux/usb/nop-usb-xceiv.h>
+#include <linux/of.h>
#include "core.h"
@@ -33,7 +34,7 @@
struct clk *clk;
};
-static int __devinit dwc3_exynos_register_phys(struct dwc3_exynos *exynos)
+static int dwc3_exynos_register_phys(struct dwc3_exynos *exynos)
{
struct nop_usb_xceiv_platform_data pdata;
struct platform_device *pdev;
@@ -87,14 +88,14 @@
return ret;
}
-static int __devinit dwc3_exynos_probe(struct platform_device *pdev)
+static u64 dwc3_exynos_dma_mask = DMA_BIT_MASK(32);
+
+static int dwc3_exynos_probe(struct platform_device *pdev)
{
- struct dwc3_exynos_data *pdata = pdev->dev.platform_data;
struct platform_device *dwc3;
struct dwc3_exynos *exynos;
struct clk *clk;
- int devid;
int ret = -ENOMEM;
exynos = kzalloc(sizeof(*exynos), GFP_KERNEL);
@@ -103,11 +104,15 @@
goto err0;
}
- platform_set_drvdata(pdev, exynos);
+ /*
+ * Right now device-tree probed devices don't get dma_mask set.
+ * Since shared usb code relies on it, set it here for now.
+ * Once we move to full device tree support this will vanish off.
+ */
+ if (!pdev->dev.dma_mask)
+ pdev->dev.dma_mask = &dwc3_exynos_dma_mask;
- devid = dwc3_get_device_id();
- if (devid < 0)
- goto err1;
+ platform_set_drvdata(pdev, exynos);
ret = dwc3_exynos_register_phys(exynos);
if (ret) {
@@ -115,10 +120,10 @@
goto err1;
}
- dwc3 = platform_device_alloc("dwc3", devid);
+ dwc3 = platform_device_alloc("dwc3", PLATFORM_DEVID_AUTO);
if (!dwc3) {
dev_err(&pdev->dev, "couldn't allocate dwc3 device\n");
- goto err2;
+ goto err1;
}
clk = clk_get(&pdev->dev, "usbdrd30");
@@ -139,14 +144,6 @@
clk_enable(exynos->clk);
- /* PHY initialization */
- if (!pdata) {
- dev_dbg(&pdev->dev, "missing platform data\n");
- } else {
- if (pdata->phy_init)
- pdata->phy_init(pdev, pdata->phy_type);
- }
-
ret = platform_device_add_resources(dwc3, pdev->resource,
pdev->num_resources);
if (ret) {
@@ -163,35 +160,24 @@
return 0;
err4:
- if (pdata && pdata->phy_exit)
- pdata->phy_exit(pdev, pdata->phy_type);
-
clk_disable(clk);
clk_put(clk);
err3:
platform_device_put(dwc3);
-err2:
- dwc3_put_device_id(devid);
err1:
kfree(exynos);
err0:
return ret;
}
-static int __devexit dwc3_exynos_remove(struct platform_device *pdev)
+static int dwc3_exynos_remove(struct platform_device *pdev)
{
struct dwc3_exynos *exynos = platform_get_drvdata(pdev);
- struct dwc3_exynos_data *pdata = pdev->dev.platform_data;
platform_device_unregister(exynos->dwc3);
platform_device_unregister(exynos->usb2_phy);
platform_device_unregister(exynos->usb3_phy);
- dwc3_put_device_id(exynos->dwc3->id);
-
- if (pdata && pdata->phy_exit)
- pdata->phy_exit(pdev, pdata->phy_type);
-
clk_disable(exynos->clk);
clk_put(exynos->clk);
@@ -200,11 +186,20 @@
return 0;
}
+#ifdef CONFIG_OF
+static const struct of_device_id exynos_dwc3_match[] = {
+ { .compatible = "samsung,exynos-dwc3" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, exynos_dwc3_match);
+#endif
+
static struct platform_driver dwc3_exynos_driver = {
.probe = dwc3_exynos_probe,
- .remove = __devexit_p(dwc3_exynos_remove),
+ .remove = dwc3_exynos_remove,
.driver = {
.name = "exynos-dwc3",
+ .of_match_table = of_match_ptr(exynos_dwc3_match),
},
};
diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c
index ee57a10..f31867f 100644
--- a/drivers/usb/dwc3/dwc3-omap.c
+++ b/drivers/usb/dwc3/dwc3-omap.c
@@ -157,7 +157,7 @@
writel(value, base + offset);
}
-static int __devinit dwc3_omap_register_phys(struct dwc3_omap *omap)
+static int dwc3_omap_register_phys(struct dwc3_omap *omap)
{
struct nop_usb_xceiv_platform_data pdata;
struct platform_device *pdev;
@@ -262,7 +262,7 @@
return IRQ_HANDLED;
}
-static int __devinit dwc3_omap_probe(struct platform_device *pdev)
+static int dwc3_omap_probe(struct platform_device *pdev)
{
struct dwc3_omap_data *pdata = pdev->dev.platform_data;
struct device_node *node = pdev->dev.of_node;
@@ -272,7 +272,6 @@
struct resource *res;
struct device *dev = &pdev->dev;
- int devid;
int size;
int ret = -ENOMEM;
int irq;
@@ -315,14 +314,10 @@
return ret;
}
- devid = dwc3_get_device_id();
- if (devid < 0)
- return -ENODEV;
-
- dwc3 = platform_device_alloc("dwc3", devid);
+ dwc3 = platform_device_alloc("dwc3", PLATFORM_DEVID_AUTO);
if (!dwc3) {
dev_err(dev, "couldn't allocate dwc3 device\n");
- goto err1;
+ return -ENOMEM;
}
context = devm_kzalloc(dev, resource_size(res), GFP_KERNEL);
@@ -423,23 +418,16 @@
err2:
platform_device_put(dwc3);
-
-err1:
- dwc3_put_device_id(devid);
-
return ret;
}
-static int __devexit dwc3_omap_remove(struct platform_device *pdev)
+static int dwc3_omap_remove(struct platform_device *pdev)
{
struct dwc3_omap *omap = platform_get_drvdata(pdev);
platform_device_unregister(omap->dwc3);
platform_device_unregister(omap->usb2_phy);
platform_device_unregister(omap->usb3_phy);
-
- dwc3_put_device_id(omap->dwc3->id);
-
return 0;
}
@@ -453,7 +441,7 @@
static struct platform_driver dwc3_omap_driver = {
.probe = dwc3_omap_probe,
- .remove = __devexit_p(dwc3_omap_remove),
+ .remove = dwc3_omap_remove,
.driver = {
.name = "omap-dwc3",
.of_match_table = of_dwc3_matach,
diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c
index 94f550e..7d70f44 100644
--- a/drivers/usb/dwc3/dwc3-pci.c
+++ b/drivers/usb/dwc3/dwc3-pci.c
@@ -58,7 +58,7 @@
struct platform_device *usb3_phy;
};
-static int __devinit dwc3_pci_register_phys(struct dwc3_pci *glue)
+static int dwc3_pci_register_phys(struct dwc3_pci *glue)
{
struct nop_usb_xceiv_platform_data pdata;
struct platform_device *pdev;
@@ -112,14 +112,13 @@
return ret;
}
-static int __devinit dwc3_pci_probe(struct pci_dev *pci,
+static int dwc3_pci_probe(struct pci_dev *pci,
const struct pci_device_id *id)
{
struct resource res[2];
struct platform_device *dwc3;
struct dwc3_pci *glue;
int ret = -ENOMEM;
- int devid;
struct device *dev = &pci->dev;
glue = devm_kzalloc(dev, sizeof(*glue), GFP_KERNEL);
@@ -145,13 +144,7 @@
return ret;
}
- devid = dwc3_get_device_id();
- if (devid < 0) {
- ret = -ENOMEM;
- goto err1;
- }
-
- dwc3 = platform_device_alloc("dwc3", devid);
+ dwc3 = platform_device_alloc("dwc3", PLATFORM_DEVID_AUTO);
if (!dwc3) {
dev_err(dev, "couldn't allocate dwc3 device\n");
ret = -ENOMEM;
@@ -172,7 +165,7 @@
ret = platform_device_add_resources(dwc3, res, ARRAY_SIZE(res));
if (ret) {
dev_err(dev, "couldn't add resources to dwc3 device\n");
- goto err2;
+ goto err1;
}
pci_set_drvdata(pci, glue);
@@ -195,23 +188,18 @@
err3:
pci_set_drvdata(pci, NULL);
platform_device_put(dwc3);
-
-err2:
- dwc3_put_device_id(devid);
-
err1:
pci_disable_device(pci);
return ret;
}
-static void __devexit dwc3_pci_remove(struct pci_dev *pci)
+static void dwc3_pci_remove(struct pci_dev *pci)
{
struct dwc3_pci *glue = pci_get_drvdata(pci);
platform_device_unregister(glue->usb2_phy);
platform_device_unregister(glue->usb3_phy);
- dwc3_put_device_id(glue->dwc3->id);
platform_device_unregister(glue->dwc3);
pci_set_drvdata(pci, NULL);
pci_disable_device(pci);
@@ -230,7 +218,7 @@
.name = "dwc3-pci",
.id_table = dwc3_pci_id_table,
.probe = dwc3_pci_probe,
- .remove = __devexit_p(dwc3_pci_remove),
+ .remove = dwc3_pci_remove,
};
MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 7b7dedd..2e43b33 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -1579,7 +1579,7 @@
/* -------------------------------------------------------------------------- */
-static int __devinit dwc3_gadget_init_endpoints(struct dwc3 *dwc)
+static int dwc3_gadget_init_endpoints(struct dwc3 *dwc)
{
struct dwc3_ep *dep;
u8 epnum;
@@ -2374,7 +2374,7 @@
*
* Returns 0 on success otherwise negative errno.
*/
-int __devinit dwc3_gadget_init(struct dwc3 *dwc)
+int dwc3_gadget_init(struct dwc3 *dwc)
{
u32 reg;
int ret;
diff --git a/drivers/usb/early/ehci-dbgp.c b/drivers/usb/early/ehci-dbgp.c
index 4bfa78a..5e29dde 100644
--- a/drivers/usb/early/ehci-dbgp.c
+++ b/drivers/usb/early/ehci-dbgp.c
@@ -974,7 +974,7 @@
.index = -1,
};
-#if IS_ENABLED(CONFIG_USB_EHCI_HCD)
+#if IS_ENABLED(CONFIG_USB)
int dbgp_reset_prep(struct usb_hcd *hcd)
{
int ret = xen_dbgp_reset_prep(hcd);
@@ -1008,7 +1008,7 @@
return xen_dbgp_external_startup(hcd) ?: _dbgp_external_startup();
}
EXPORT_SYMBOL_GPL(dbgp_external_startup);
-#endif /* USB_EHCI_HCD */
+#endif /* USB */
#ifdef CONFIG_KGDB
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index e0ff51b..14625fd 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -721,31 +721,6 @@
Include a configuration with the Function Filesystem alone with
no Ethernet interface.
-config USB_FILE_STORAGE
- tristate "File-backed Storage Gadget (DEPRECATED)"
- depends on BLOCK
- help
- The File-backed Storage Gadget acts as a USB Mass Storage
- disk drive. As its storage repository it can use a regular
- file or a block device (in much the same way as the "loop"
- device driver), specified as a module parameter.
-
- Say "y" to link the driver statically, or "m" to build a
- dynamically linked module called "g_file_storage".
-
- NOTE: This driver is deprecated. Its replacement is the
- Mass Storage Gadget.
-
-config USB_FILE_STORAGE_TEST
- bool "File-backed Storage Gadget testing version"
- depends on USB_FILE_STORAGE
- default n
- help
- Say "y" to generate the larger testing version of the
- File-backed Storage Gadget, useful for probing the
- behavior of USB Mass Storage hosts. Not needed for
- normal operation.
-
config USB_MASS_STORAGE
tristate "Mass Storage Gadget"
depends on BLOCK
@@ -756,8 +731,8 @@
device (in much the same way as the "loop" device driver),
specified as a module parameter or sysfs option.
- This driver is an updated replacement for the deprecated
- File-backed Storage Gadget (g_file_storage).
+ This driver is a replacement for now removed File-backed
+ Storage Gadget (g_file_storage).
Say "y" to link the driver statically, or "m" to build
a dynamically linked module called "g_mass_storage".
diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
index 307be5f..8b4acfd 100644
--- a/drivers/usb/gadget/Makefile
+++ b/drivers/usb/gadget/Makefile
@@ -44,7 +44,6 @@
g_serial-y := serial.o
g_midi-y := gmidi.o
gadgetfs-y := inode.o
-g_file_storage-y := file_storage.o
g_mass_storage-y := mass_storage.o
g_printer-y := printer.o
g_cdc-y := cdc2.o
@@ -62,7 +61,6 @@
obj-$(CONFIG_USB_ETH) += g_ether.o
obj-$(CONFIG_USB_GADGETFS) += gadgetfs.o
obj-$(CONFIG_USB_FUNCTIONFS) += g_ffs.o
-obj-$(CONFIG_USB_FILE_STORAGE) += g_file_storage.o
obj-$(CONFIG_USB_MASS_STORAGE) += g_mass_storage.o
obj-$(CONFIG_USB_G_SERIAL) += g_serial.o
obj-$(CONFIG_USB_G_PRINTER) += g_printer.o
diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index 89d90b5..e6135fa 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -1673,7 +1673,7 @@
spin_unlock_irqrestore(&udc->lock, flags);
}
-static void __devinit at91udc_of_init(struct at91_udc *udc,
+static void at91udc_of_init(struct at91_udc *udc,
struct device_node *np)
{
struct at91_udc_data *board = &udc->board;
@@ -1693,7 +1693,7 @@
board->pullup_active_low = (flags & OF_GPIO_ACTIVE_LOW) ? 1 : 0;
}
-static int __devinit at91udc_probe(struct platform_device *pdev)
+static int at91udc_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct at91_udc *udc;
diff --git a/drivers/usb/gadget/bcm63xx_udc.c b/drivers/usb/gadget/bcm63xx_udc.c
index 9ca7922..47a4993 100644
--- a/drivers/usb/gadget/bcm63xx_udc.c
+++ b/drivers/usb/gadget/bcm63xx_udc.c
@@ -2323,7 +2323,7 @@
* Note that platform data is required, because pd.port_no varies from chip
* to chip and is used to switch the correct USB port to device mode.
*/
-static int __devinit bcm63xx_udc_probe(struct platform_device *pdev)
+static int bcm63xx_udc_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct bcm63xx_usbd_platform_data *pd = dev->platform_data;
@@ -2433,7 +2433,7 @@
* bcm63xx_udc_remove - Remove the device from the system.
* @pdev: Platform device struct from the bcm63xx BSP code.
*/
-static int __devexit bcm63xx_udc_remove(struct platform_device *pdev)
+static int bcm63xx_udc_remove(struct platform_device *pdev)
{
struct bcm63xx_udc *udc = platform_get_drvdata(pdev);
@@ -2450,7 +2450,7 @@
static struct platform_driver bcm63xx_udc_driver = {
.probe = bcm63xx_udc_probe,
- .remove = __devexit_p(bcm63xx_udc_remove),
+ .remove = bcm63xx_udc_remove,
.driver = {
.name = DRV_MODULE_NAME,
.owner = THIS_MODULE,
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index 957f973..2a6bfe7 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -107,7 +107,7 @@
}
/* else: fall through */
default:
- speed_desc = f->descriptors;
+ speed_desc = f->fs_descriptors;
}
/* find descriptors */
for_each_ep_desc(speed_desc, d_spd) {
@@ -200,7 +200,7 @@
* as full speed ... it's the function drivers that will need
* to avoid bulk and ISO transfers.
*/
- if (!config->fullspeed && function->descriptors)
+ if (!config->fullspeed && function->fs_descriptors)
config->fullspeed = true;
if (!config->highspeed && function->hs_descriptors)
config->highspeed = true;
@@ -363,7 +363,7 @@
descriptors = f->hs_descriptors;
break;
default:
- descriptors = f->descriptors;
+ descriptors = f->fs_descriptors;
}
if (!descriptors)
@@ -620,7 +620,7 @@
descriptors = f->hs_descriptors;
break;
default:
- descriptors = f->descriptors;
+ descriptors = f->fs_descriptors;
}
for (; *descriptors; ++descriptors) {
diff --git a/drivers/usb/gadget/config.c b/drivers/usb/gadget/config.c
index e3a9892..34e12fc 100644
--- a/drivers/usb/gadget/config.c
+++ b/drivers/usb/gadget/config.c
@@ -19,7 +19,7 @@
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
-
+#include <linux/usb/composite.h>
/**
* usb_descriptor_fillbuf - fill buffer with descriptors
@@ -158,3 +158,40 @@
return ret;
}
EXPORT_SYMBOL_GPL(usb_copy_descriptors);
+
+int usb_assign_descriptors(struct usb_function *f,
+ struct usb_descriptor_header **fs,
+ struct usb_descriptor_header **hs,
+ struct usb_descriptor_header **ss)
+{
+ struct usb_gadget *g = f->config->cdev->gadget;
+
+ if (fs) {
+ f->fs_descriptors = usb_copy_descriptors(fs);
+ if (!f->fs_descriptors)
+ goto err;
+ }
+ if (hs && gadget_is_dualspeed(g)) {
+ f->hs_descriptors = usb_copy_descriptors(hs);
+ if (!f->hs_descriptors)
+ goto err;
+ }
+ if (ss && gadget_is_superspeed(g)) {
+ f->ss_descriptors = usb_copy_descriptors(ss);
+ if (!f->ss_descriptors)
+ goto err;
+ }
+ return 0;
+err:
+ usb_free_all_descriptors(f);
+ return -ENOMEM;
+}
+EXPORT_SYMBOL_GPL(usb_assign_descriptors);
+
+void usb_free_all_descriptors(struct usb_function *f)
+{
+ usb_free_descriptors(f->fs_descriptors);
+ usb_free_descriptors(f->hs_descriptors);
+ usb_free_descriptors(f->ss_descriptors);
+}
+EXPORT_SYMBOL_GPL(usb_free_all_descriptors);
diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c
index 0f7541b..95d584d 100644
--- a/drivers/usb/gadget/dummy_hcd.c
+++ b/drivers/usb/gadget/dummy_hcd.c
@@ -63,16 +63,20 @@
struct dummy_hcd_module_parameters {
bool is_super_speed;
bool is_high_speed;
+ unsigned int num;
};
static struct dummy_hcd_module_parameters mod_data = {
.is_super_speed = false,
.is_high_speed = true,
+ .num = 1,
};
module_param_named(is_super_speed, mod_data.is_super_speed, bool, S_IRUGO);
MODULE_PARM_DESC(is_super_speed, "true to simulate SuperSpeed connection");
module_param_named(is_high_speed, mod_data.is_high_speed, bool, S_IRUGO);
MODULE_PARM_DESC(is_high_speed, "true to simulate HighSpeed connection");
+module_param_named(num, mod_data.num, uint, S_IRUGO);
+MODULE_PARM_DESC(num, "number of emulated controllers");
/*-------------------------------------------------------------------------*/
/* gadget side driver data structres */
@@ -238,8 +242,6 @@
return container_of(dev, struct dummy, gadget.dev);
}
-static struct dummy the_controller;
-
/*-------------------------------------------------------------------------*/
/* SLAVE/GADGET SIDE UTILITY ROUTINES */
@@ -973,9 +975,10 @@
static int dummy_udc_probe(struct platform_device *pdev)
{
- struct dummy *dum = &the_controller;
+ struct dummy *dum;
int rc;
+ dum = *((void **)dev_get_platdata(&pdev->dev));
dum->gadget.name = gadget_name;
dum->gadget.ops = &dummy_ops;
dum->gadget.max_speed = USB_SPEED_SUPER;
@@ -2398,10 +2401,13 @@
static int dummy_setup(struct usb_hcd *hcd)
{
+ struct dummy *dum;
+
+ dum = *((void **)dev_get_platdata(hcd->self.controller));
hcd->self.sg_tablesize = ~0;
if (usb_hcd_is_primary_hcd(hcd)) {
- the_controller.hs_hcd = hcd_to_dummy_hcd(hcd);
- the_controller.hs_hcd->dum = &the_controller;
+ dum->hs_hcd = hcd_to_dummy_hcd(hcd);
+ dum->hs_hcd->dum = dum;
/*
* Mark the first roothub as being USB 2.0.
* The USB 3.0 roothub will be registered later by
@@ -2410,8 +2416,8 @@
hcd->speed = HCD_USB2;
hcd->self.root_hub->speed = USB_SPEED_HIGH;
} else {
- the_controller.ss_hcd = hcd_to_dummy_hcd(hcd);
- the_controller.ss_hcd->dum = &the_controller;
+ dum->ss_hcd = hcd_to_dummy_hcd(hcd);
+ dum->ss_hcd->dum = dum;
hcd->speed = HCD_USB3;
hcd->self.root_hub->speed = USB_SPEED_SUPER;
}
@@ -2524,11 +2530,13 @@
static int dummy_hcd_probe(struct platform_device *pdev)
{
+ struct dummy *dum;
struct usb_hcd *hs_hcd;
struct usb_hcd *ss_hcd;
int retval;
dev_info(&pdev->dev, "%s, driver " DRIVER_VERSION "\n", driver_desc);
+ dum = *((void **)dev_get_platdata(&pdev->dev));
if (!mod_data.is_super_speed)
dummy_hcd.flags = HCD_USB2;
@@ -2561,7 +2569,7 @@
usb_remove_hcd(hs_hcd);
put_usb2_hcd:
usb_put_hcd(hs_hcd);
- the_controller.hs_hcd = the_controller.ss_hcd = NULL;
+ dum->hs_hcd = dum->ss_hcd = NULL;
return retval;
}
@@ -2579,8 +2587,8 @@
usb_remove_hcd(dummy_hcd_to_hcd(dum->hs_hcd));
usb_put_hcd(dummy_hcd_to_hcd(dum->hs_hcd));
- the_controller.hs_hcd = NULL;
- the_controller.ss_hcd = NULL;
+ dum->hs_hcd = NULL;
+ dum->ss_hcd = NULL;
return 0;
}
@@ -2627,13 +2635,15 @@
};
/*-------------------------------------------------------------------------*/
-
-static struct platform_device *the_udc_pdev;
-static struct platform_device *the_hcd_pdev;
+#define MAX_NUM_UDC 2
+static struct platform_device *the_udc_pdev[MAX_NUM_UDC];
+static struct platform_device *the_hcd_pdev[MAX_NUM_UDC];
static int __init init(void)
{
int retval = -ENOMEM;
+ int i;
+ struct dummy *dum[MAX_NUM_UDC];
if (usb_disabled())
return -ENODEV;
@@ -2641,65 +2651,129 @@
if (!mod_data.is_high_speed && mod_data.is_super_speed)
return -EINVAL;
- the_hcd_pdev = platform_device_alloc(driver_name, -1);
- if (!the_hcd_pdev)
- return retval;
- the_udc_pdev = platform_device_alloc(gadget_name, -1);
- if (!the_udc_pdev)
- goto err_alloc_udc;
+ if (mod_data.num < 1 || mod_data.num > MAX_NUM_UDC) {
+ pr_err("Number of emulated UDC must be in range of 1…%d\n",
+ MAX_NUM_UDC);
+ return -EINVAL;
+ }
+
+ for (i = 0; i < mod_data.num; i++) {
+ the_hcd_pdev[i] = platform_device_alloc(driver_name, i);
+ if (!the_hcd_pdev[i]) {
+ i--;
+ while (i >= 0)
+ platform_device_put(the_hcd_pdev[i--]);
+ return retval;
+ }
+ }
+ for (i = 0; i < mod_data.num; i++) {
+ the_udc_pdev[i] = platform_device_alloc(gadget_name, i);
+ if (!the_udc_pdev[i]) {
+ i--;
+ while (i >= 0)
+ platform_device_put(the_udc_pdev[i--]);
+ goto err_alloc_udc;
+ }
+ }
+ for (i = 0; i < mod_data.num; i++) {
+ dum[i] = kzalloc(sizeof(struct dummy), GFP_KERNEL);
+ if (!dum[i])
+ goto err_add_pdata;
+ retval = platform_device_add_data(the_hcd_pdev[i], &dum[i],
+ sizeof(void *));
+ if (retval)
+ goto err_add_pdata;
+ retval = platform_device_add_data(the_udc_pdev[i], &dum[i],
+ sizeof(void *));
+ if (retval)
+ goto err_add_pdata;
+ }
retval = platform_driver_register(&dummy_hcd_driver);
if (retval < 0)
- goto err_register_hcd_driver;
+ goto err_add_pdata;
retval = platform_driver_register(&dummy_udc_driver);
if (retval < 0)
goto err_register_udc_driver;
- retval = platform_device_add(the_hcd_pdev);
- if (retval < 0)
- goto err_add_hcd;
- if (!the_controller.hs_hcd ||
- (!the_controller.ss_hcd && mod_data.is_super_speed)) {
- /*
- * The hcd was added successfully but its probe function failed
- * for some reason.
- */
- retval = -EINVAL;
- goto err_add_udc;
+ for (i = 0; i < mod_data.num; i++) {
+ retval = platform_device_add(the_hcd_pdev[i]);
+ if (retval < 0) {
+ i--;
+ while (i >= 0)
+ platform_device_del(the_hcd_pdev[i--]);
+ goto err_add_hcd;
+ }
}
- retval = platform_device_add(the_udc_pdev);
- if (retval < 0)
- goto err_add_udc;
- if (!platform_get_drvdata(the_udc_pdev)) {
- /*
- * The udc was added successfully but its probe function failed
- * for some reason.
- */
- retval = -EINVAL;
- goto err_probe_udc;
+ for (i = 0; i < mod_data.num; i++) {
+ if (!dum[i]->hs_hcd ||
+ (!dum[i]->ss_hcd && mod_data.is_super_speed)) {
+ /*
+ * The hcd was added successfully but its probe
+ * function failed for some reason.
+ */
+ retval = -EINVAL;
+ goto err_add_udc;
+ }
+ }
+
+ for (i = 0; i < mod_data.num; i++) {
+ retval = platform_device_add(the_udc_pdev[i]);
+ if (retval < 0) {
+ i--;
+ while (i >= 0)
+ platform_device_del(the_udc_pdev[i]);
+ goto err_add_udc;
+ }
+ }
+
+ for (i = 0; i < mod_data.num; i++) {
+ if (!platform_get_drvdata(the_udc_pdev[i])) {
+ /*
+ * The udc was added successfully but its probe
+ * function failed for some reason.
+ */
+ retval = -EINVAL;
+ goto err_probe_udc;
+ }
}
return retval;
err_probe_udc:
- platform_device_del(the_udc_pdev);
+ for (i = 0; i < mod_data.num; i++)
+ platform_device_del(the_udc_pdev[i]);
err_add_udc:
- platform_device_del(the_hcd_pdev);
+ for (i = 0; i < mod_data.num; i++)
+ platform_device_del(the_hcd_pdev[i]);
err_add_hcd:
platform_driver_unregister(&dummy_udc_driver);
err_register_udc_driver:
platform_driver_unregister(&dummy_hcd_driver);
-err_register_hcd_driver:
- platform_device_put(the_udc_pdev);
+err_add_pdata:
+ for (i = 0; i < mod_data.num; i++)
+ kfree(dum[i]);
+ for (i = 0; i < mod_data.num; i++)
+ platform_device_put(the_udc_pdev[i]);
err_alloc_udc:
- platform_device_put(the_hcd_pdev);
+ for (i = 0; i < mod_data.num; i++)
+ platform_device_put(the_hcd_pdev[i]);
return retval;
}
module_init(init);
static void __exit cleanup(void)
{
- platform_device_unregister(the_udc_pdev);
- platform_device_unregister(the_hcd_pdev);
+ int i;
+
+ for (i = 0; i < mod_data.num; i++) {
+ struct dummy *dum;
+
+ dum = *((void **)dev_get_platdata(&the_udc_pdev[i]->dev));
+
+ platform_device_unregister(the_udc_pdev[i]);
+ platform_device_unregister(the_hcd_pdev[i]);
+ kfree(dum);
+ }
platform_driver_unregister(&dummy_udc_driver);
platform_driver_unregister(&dummy_hcd_driver);
}
diff --git a/drivers/usb/gadget/f_acm.c b/drivers/usb/gadget/f_acm.c
index d672250a..5491744 100644
--- a/drivers/usb/gadget/f_acm.c
+++ b/drivers/usb/gadget/f_acm.c
@@ -87,7 +87,7 @@
/* notification endpoint uses smallish and infrequent fixed-size messages */
-#define GS_LOG2_NOTIFY_INTERVAL 5 /* 1 << 5 == 32 msec */
+#define GS_NOTIFY_INTERVAL_MS 32
#define GS_NOTIFY_MAXPACKET 10 /* notification + 2 bytes */
/* interface and class descriptors: */
@@ -167,7 +167,7 @@
.bEndpointAddress = USB_DIR_IN,
.bmAttributes = USB_ENDPOINT_XFER_INT,
.wMaxPacketSize = cpu_to_le16(GS_NOTIFY_MAXPACKET),
- .bInterval = 1 << GS_LOG2_NOTIFY_INTERVAL,
+ .bInterval = GS_NOTIFY_INTERVAL_MS,
};
static struct usb_endpoint_descriptor acm_fs_in_desc = {
@@ -199,14 +199,13 @@
};
/* high speed support: */
-
static struct usb_endpoint_descriptor acm_hs_notify_desc = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = USB_DIR_IN,
.bmAttributes = USB_ENDPOINT_XFER_INT,
.wMaxPacketSize = cpu_to_le16(GS_NOTIFY_MAXPACKET),
- .bInterval = GS_LOG2_NOTIFY_INTERVAL+4,
+ .bInterval = USB_MS_TO_HS_INTERVAL(GS_NOTIFY_INTERVAL_MS),
};
static struct usb_endpoint_descriptor acm_hs_in_desc = {
@@ -659,37 +658,22 @@
acm->notify_req->complete = acm_cdc_notify_complete;
acm->notify_req->context = acm;
- /* copy descriptors */
- f->descriptors = usb_copy_descriptors(acm_fs_function);
- if (!f->descriptors)
- goto fail;
-
/* support all relevant hardware speeds... we expect that when
* hardware is dual speed, all bulk-capable endpoints work at
* both speeds
*/
- if (gadget_is_dualspeed(c->cdev->gadget)) {
- acm_hs_in_desc.bEndpointAddress =
- acm_fs_in_desc.bEndpointAddress;
- acm_hs_out_desc.bEndpointAddress =
- acm_fs_out_desc.bEndpointAddress;
- acm_hs_notify_desc.bEndpointAddress =
- acm_fs_notify_desc.bEndpointAddress;
+ acm_hs_in_desc.bEndpointAddress = acm_fs_in_desc.bEndpointAddress;
+ acm_hs_out_desc.bEndpointAddress = acm_fs_out_desc.bEndpointAddress;
+ acm_hs_notify_desc.bEndpointAddress =
+ acm_fs_notify_desc.bEndpointAddress;
- /* copy descriptors */
- f->hs_descriptors = usb_copy_descriptors(acm_hs_function);
- }
- if (gadget_is_superspeed(c->cdev->gadget)) {
- acm_ss_in_desc.bEndpointAddress =
- acm_fs_in_desc.bEndpointAddress;
- acm_ss_out_desc.bEndpointAddress =
- acm_fs_out_desc.bEndpointAddress;
+ acm_ss_in_desc.bEndpointAddress = acm_fs_in_desc.bEndpointAddress;
+ acm_ss_out_desc.bEndpointAddress = acm_fs_out_desc.bEndpointAddress;
- /* copy descriptors, and track endpoint copies */
- f->ss_descriptors = usb_copy_descriptors(acm_ss_function);
- if (!f->ss_descriptors)
- goto fail;
- }
+ status = usb_assign_descriptors(f, acm_fs_function, acm_hs_function,
+ acm_ss_function);
+ if (status)
+ goto fail;
DBG(cdev, "acm ttyGS%d: %s speed IN/%s OUT/%s NOTIFY/%s\n",
acm->port_num,
@@ -721,11 +705,8 @@
{
struct f_acm *acm = func_to_acm(f);
- if (gadget_is_dualspeed(c->cdev->gadget))
- usb_free_descriptors(f->hs_descriptors);
- if (gadget_is_superspeed(c->cdev->gadget))
- usb_free_descriptors(f->ss_descriptors);
- usb_free_descriptors(f->descriptors);
+ acm_string_defs[0].id = 0;
+ usb_free_all_descriptors(f);
gs_free_req(acm->notify, acm->notify_req);
kfree(acm);
}
@@ -762,27 +743,15 @@
*/
/* maybe allocate device-global string IDs, and patch descriptors */
- if (acm_string_defs[ACM_CTRL_IDX].id == 0) {
- status = usb_string_id(c->cdev);
+ if (acm_string_defs[0].id == 0) {
+ status = usb_string_ids_tab(c->cdev, acm_string_defs);
if (status < 0)
return status;
- acm_string_defs[ACM_CTRL_IDX].id = status;
-
- acm_control_interface_desc.iInterface = status;
-
- status = usb_string_id(c->cdev);
- if (status < 0)
- return status;
- acm_string_defs[ACM_DATA_IDX].id = status;
-
- acm_data_interface_desc.iInterface = status;
-
- status = usb_string_id(c->cdev);
- if (status < 0)
- return status;
- acm_string_defs[ACM_IAD_IDX].id = status;
-
- acm_iad_descriptor.iFunction = status;
+ acm_control_interface_desc.iInterface =
+ acm_string_defs[ACM_CTRL_IDX].id;
+ acm_data_interface_desc.iInterface =
+ acm_string_defs[ACM_DATA_IDX].id;
+ acm_iad_descriptor.iFunction = acm_string_defs[ACM_IAD_IDX].id;
}
/* allocate and initialize one new instance */
diff --git a/drivers/usb/gadget/f_ecm.c b/drivers/usb/gadget/f_ecm.c
index 95bc94f..83420a3 100644
--- a/drivers/usb/gadget/f_ecm.c
+++ b/drivers/usb/gadget/f_ecm.c
@@ -91,7 +91,7 @@
* encapsulated commands (vendor-specific, using control-OUT).
*/
-#define LOG2_STATUS_INTERVAL_MSEC 5 /* 1 << 5 == 32 msec */
+#define ECM_STATUS_INTERVAL_MS 32
#define ECM_STATUS_BYTECOUNT 16 /* 8 byte header + data */
@@ -192,7 +192,7 @@
.bEndpointAddress = USB_DIR_IN,
.bmAttributes = USB_ENDPOINT_XFER_INT,
.wMaxPacketSize = cpu_to_le16(ECM_STATUS_BYTECOUNT),
- .bInterval = 1 << LOG2_STATUS_INTERVAL_MSEC,
+ .bInterval = ECM_STATUS_INTERVAL_MS,
};
static struct usb_endpoint_descriptor fs_ecm_in_desc = {
@@ -239,7 +239,7 @@
.bEndpointAddress = USB_DIR_IN,
.bmAttributes = USB_ENDPOINT_XFER_INT,
.wMaxPacketSize = cpu_to_le16(ECM_STATUS_BYTECOUNT),
- .bInterval = LOG2_STATUS_INTERVAL_MSEC + 4,
+ .bInterval = USB_MS_TO_HS_INTERVAL(ECM_STATUS_INTERVAL_MS),
};
static struct usb_endpoint_descriptor hs_ecm_in_desc = {
@@ -288,7 +288,7 @@
.bEndpointAddress = USB_DIR_IN,
.bmAttributes = USB_ENDPOINT_XFER_INT,
.wMaxPacketSize = cpu_to_le16(ECM_STATUS_BYTECOUNT),
- .bInterval = LOG2_STATUS_INTERVAL_MSEC + 4,
+ .bInterval = USB_MS_TO_HS_INTERVAL(ECM_STATUS_INTERVAL_MS),
};
static struct usb_ss_ep_comp_descriptor ss_ecm_intr_comp_desc = {
@@ -330,6 +330,7 @@
static struct usb_descriptor_header *ecm_ss_function[] = {
/* CDC ECM control descriptors */
+ (struct usb_descriptor_header *) &ecm_iad_descriptor,
(struct usb_descriptor_header *) &ecm_control_intf,
(struct usb_descriptor_header *) &ecm_header_desc,
(struct usb_descriptor_header *) &ecm_union_desc,
@@ -353,7 +354,7 @@
static struct usb_string ecm_string_defs[] = {
[0].s = "CDC Ethernet Control Model (ECM)",
- [1].s = NULL /* DYNAMIC */,
+ [1].s = "",
[2].s = "CDC Ethernet Data",
[3].s = "CDC ECM",
{ } /* end of list */
@@ -742,42 +743,24 @@
ecm->notify_req->context = ecm;
ecm->notify_req->complete = ecm_notify_complete;
- /* copy descriptors, and track endpoint copies */
- f->descriptors = usb_copy_descriptors(ecm_fs_function);
- if (!f->descriptors)
- goto fail;
-
/* support all relevant hardware speeds... we expect that when
* hardware is dual speed, all bulk-capable endpoints work at
* both speeds
*/
- if (gadget_is_dualspeed(c->cdev->gadget)) {
- hs_ecm_in_desc.bEndpointAddress =
- fs_ecm_in_desc.bEndpointAddress;
- hs_ecm_out_desc.bEndpointAddress =
- fs_ecm_out_desc.bEndpointAddress;
- hs_ecm_notify_desc.bEndpointAddress =
- fs_ecm_notify_desc.bEndpointAddress;
+ hs_ecm_in_desc.bEndpointAddress = fs_ecm_in_desc.bEndpointAddress;
+ hs_ecm_out_desc.bEndpointAddress = fs_ecm_out_desc.bEndpointAddress;
+ hs_ecm_notify_desc.bEndpointAddress =
+ fs_ecm_notify_desc.bEndpointAddress;
- /* copy descriptors, and track endpoint copies */
- f->hs_descriptors = usb_copy_descriptors(ecm_hs_function);
- if (!f->hs_descriptors)
- goto fail;
- }
+ ss_ecm_in_desc.bEndpointAddress = fs_ecm_in_desc.bEndpointAddress;
+ ss_ecm_out_desc.bEndpointAddress = fs_ecm_out_desc.bEndpointAddress;
+ ss_ecm_notify_desc.bEndpointAddress =
+ fs_ecm_notify_desc.bEndpointAddress;
- if (gadget_is_superspeed(c->cdev->gadget)) {
- ss_ecm_in_desc.bEndpointAddress =
- fs_ecm_in_desc.bEndpointAddress;
- ss_ecm_out_desc.bEndpointAddress =
- fs_ecm_out_desc.bEndpointAddress;
- ss_ecm_notify_desc.bEndpointAddress =
- fs_ecm_notify_desc.bEndpointAddress;
-
- /* copy descriptors, and track endpoint copies */
- f->ss_descriptors = usb_copy_descriptors(ecm_ss_function);
- if (!f->ss_descriptors)
- goto fail;
- }
+ status = usb_assign_descriptors(f, ecm_fs_function, ecm_hs_function,
+ ecm_ss_function);
+ if (status)
+ goto fail;
/* NOTE: all that is done without knowing or caring about
* the network link ... which is unavailable to this code
@@ -795,11 +778,6 @@
return 0;
fail:
- if (f->descriptors)
- usb_free_descriptors(f->descriptors);
- if (f->hs_descriptors)
- usb_free_descriptors(f->hs_descriptors);
-
if (ecm->notify_req) {
kfree(ecm->notify_req->buf);
usb_ep_free_request(ecm->notify, ecm->notify_req);
@@ -808,9 +786,9 @@
/* we might as well release our claims on endpoints */
if (ecm->notify)
ecm->notify->driver_data = NULL;
- if (ecm->port.out_ep->desc)
+ if (ecm->port.out_ep)
ecm->port.out_ep->driver_data = NULL;
- if (ecm->port.in_ep->desc)
+ if (ecm->port.in_ep)
ecm->port.in_ep->driver_data = NULL;
ERROR(cdev, "%s: can't bind, err %d\n", f->name, status);
@@ -825,16 +803,11 @@
DBG(c->cdev, "ecm unbind\n");
- if (gadget_is_superspeed(c->cdev->gadget))
- usb_free_descriptors(f->ss_descriptors);
- if (gadget_is_dualspeed(c->cdev->gadget))
- usb_free_descriptors(f->hs_descriptors);
- usb_free_descriptors(f->descriptors);
+ ecm_string_defs[0].id = 0;
+ usb_free_all_descriptors(f);
kfree(ecm->notify_req->buf);
usb_ep_free_request(ecm->notify, ecm->notify_req);
-
- ecm_string_defs[1].s = NULL;
kfree(ecm);
}
@@ -859,36 +832,15 @@
if (!can_support_ecm(c->cdev->gadget) || !ethaddr)
return -EINVAL;
- /* maybe allocate device-global string IDs */
if (ecm_string_defs[0].id == 0) {
-
- /* control interface label */
- status = usb_string_id(c->cdev);
- if (status < 0)
+ status = usb_string_ids_tab(c->cdev, ecm_string_defs);
+ if (status)
return status;
- ecm_string_defs[0].id = status;
- ecm_control_intf.iInterface = status;
- /* data interface label */
- status = usb_string_id(c->cdev);
- if (status < 0)
- return status;
- ecm_string_defs[2].id = status;
- ecm_data_intf.iInterface = status;
-
- /* MAC address */
- status = usb_string_id(c->cdev);
- if (status < 0)
- return status;
- ecm_string_defs[1].id = status;
- ecm_desc.iMACAddress = status;
-
- /* IAD label */
- status = usb_string_id(c->cdev);
- if (status < 0)
- return status;
- ecm_string_defs[3].id = status;
- ecm_iad_descriptor.iFunction = status;
+ ecm_control_intf.iInterface = ecm_string_defs[0].id;
+ ecm_data_intf.iInterface = ecm_string_defs[2].id;
+ ecm_desc.iMACAddress = ecm_string_defs[1].id;
+ ecm_iad_descriptor.iFunction = ecm_string_defs[3].id;
}
/* allocate and initialize one new instance */
@@ -913,9 +865,7 @@
ecm->port.func.disable = ecm_disable;
status = usb_add_function(c, &ecm->port.func);
- if (status) {
- ecm_string_defs[1].s = NULL;
+ if (status)
kfree(ecm);
- }
return status;
}
diff --git a/drivers/usb/gadget/f_eem.c b/drivers/usb/gadget/f_eem.c
index 1a7b2dd..cf0ebee8 100644
--- a/drivers/usb/gadget/f_eem.c
+++ b/drivers/usb/gadget/f_eem.c
@@ -274,38 +274,20 @@
status = -ENOMEM;
- /* copy descriptors, and track endpoint copies */
- f->descriptors = usb_copy_descriptors(eem_fs_function);
- if (!f->descriptors)
- goto fail;
-
/* support all relevant hardware speeds... we expect that when
* hardware is dual speed, all bulk-capable endpoints work at
* both speeds
*/
- if (gadget_is_dualspeed(c->cdev->gadget)) {
- eem_hs_in_desc.bEndpointAddress =
- eem_fs_in_desc.bEndpointAddress;
- eem_hs_out_desc.bEndpointAddress =
- eem_fs_out_desc.bEndpointAddress;
+ eem_hs_in_desc.bEndpointAddress = eem_fs_in_desc.bEndpointAddress;
+ eem_hs_out_desc.bEndpointAddress = eem_fs_out_desc.bEndpointAddress;
- /* copy descriptors, and track endpoint copies */
- f->hs_descriptors = usb_copy_descriptors(eem_hs_function);
- if (!f->hs_descriptors)
- goto fail;
- }
+ eem_ss_in_desc.bEndpointAddress = eem_fs_in_desc.bEndpointAddress;
+ eem_ss_out_desc.bEndpointAddress = eem_fs_out_desc.bEndpointAddress;
- if (gadget_is_superspeed(c->cdev->gadget)) {
- eem_ss_in_desc.bEndpointAddress =
- eem_fs_in_desc.bEndpointAddress;
- eem_ss_out_desc.bEndpointAddress =
- eem_fs_out_desc.bEndpointAddress;
-
- /* copy descriptors, and track endpoint copies */
- f->ss_descriptors = usb_copy_descriptors(eem_ss_function);
- if (!f->ss_descriptors)
- goto fail;
- }
+ status = usb_assign_descriptors(f, eem_fs_function, eem_hs_function,
+ eem_ss_function);
+ if (status)
+ goto fail;
DBG(cdev, "CDC Ethernet (EEM): %s speed IN/%s OUT/%s\n",
gadget_is_superspeed(c->cdev->gadget) ? "super" :
@@ -314,15 +296,10 @@
return 0;
fail:
- if (f->descriptors)
- usb_free_descriptors(f->descriptors);
- if (f->hs_descriptors)
- usb_free_descriptors(f->hs_descriptors);
-
- /* we might as well release our claims on endpoints */
- if (eem->port.out_ep->desc)
+ usb_free_all_descriptors(f);
+ if (eem->port.out_ep)
eem->port.out_ep->driver_data = NULL;
- if (eem->port.in_ep->desc)
+ if (eem->port.in_ep)
eem->port.in_ep->driver_data = NULL;
ERROR(cdev, "%s: can't bind, err %d\n", f->name, status);
@@ -337,11 +314,7 @@
DBG(c->cdev, "eem unbind\n");
- if (gadget_is_superspeed(c->cdev->gadget))
- usb_free_descriptors(f->ss_descriptors);
- if (gadget_is_dualspeed(c->cdev->gadget))
- usb_free_descriptors(f->hs_descriptors);
- usb_free_descriptors(f->descriptors);
+ usb_free_all_descriptors(f);
kfree(eem);
}
diff --git a/drivers/usb/gadget/f_fs.c b/drivers/usb/gadget/f_fs.c
index 64c4ec1..4a6961c 100644
--- a/drivers/usb/gadget/f_fs.c
+++ b/drivers/usb/gadget/f_fs.c
@@ -2097,7 +2097,7 @@
if (isHS)
func->function.hs_descriptors[(long)valuep] = desc;
else
- func->function.descriptors[(long)valuep] = desc;
+ func->function.fs_descriptors[(long)valuep] = desc;
if (!desc || desc->bDescriptorType != USB_DT_ENDPOINT)
return 0;
@@ -2249,7 +2249,7 @@
* numbers without worrying that it may be described later on.
*/
if (likely(full)) {
- func->function.descriptors = data->fs_descs;
+ func->function.fs_descriptors = data->fs_descs;
ret = ffs_do_descs(ffs->fs_descs_count,
data->raw_descs,
sizeof data->raw_descs,
diff --git a/drivers/usb/gadget/f_hid.c b/drivers/usb/gadget/f_hid.c
index 511e527..6e69a8e 100644
--- a/drivers/usb/gadget/f_hid.c
+++ b/drivers/usb/gadget/f_hid.c
@@ -573,7 +573,6 @@
goto fail;
hidg_interface_desc.bInterfaceNumber = status;
-
/* allocate instance-specific endpoints */
status = -ENODEV;
ep = usb_ep_autoconfig(c->cdev->gadget, &hidg_fs_in_ep_desc);
@@ -609,20 +608,15 @@
hidg_desc.desc[0].wDescriptorLength =
cpu_to_le16(hidg->report_desc_length);
- /* copy descriptors */
- f->descriptors = usb_copy_descriptors(hidg_fs_descriptors);
- if (!f->descriptors)
- goto fail;
+ hidg_hs_in_ep_desc.bEndpointAddress =
+ hidg_fs_in_ep_desc.bEndpointAddress;
+ hidg_hs_out_ep_desc.bEndpointAddress =
+ hidg_fs_out_ep_desc.bEndpointAddress;
- if (gadget_is_dualspeed(c->cdev->gadget)) {
- hidg_hs_in_ep_desc.bEndpointAddress =
- hidg_fs_in_ep_desc.bEndpointAddress;
- hidg_hs_out_ep_desc.bEndpointAddress =
- hidg_fs_out_ep_desc.bEndpointAddress;
- f->hs_descriptors = usb_copy_descriptors(hidg_hs_descriptors);
- if (!f->hs_descriptors)
- goto fail;
- }
+ status = usb_assign_descriptors(f, hidg_fs_descriptors,
+ hidg_hs_descriptors, NULL);
+ if (status)
+ goto fail;
mutex_init(&hidg->lock);
spin_lock_init(&hidg->spinlock);
@@ -649,9 +643,7 @@
usb_ep_free_request(hidg->in_ep, hidg->req);
}
- usb_free_descriptors(f->hs_descriptors);
- usb_free_descriptors(f->descriptors);
-
+ usb_free_all_descriptors(f);
return status;
}
@@ -668,9 +660,7 @@
kfree(hidg->req->buf);
usb_ep_free_request(hidg->in_ep, hidg->req);
- /* free descriptors copies */
- usb_free_descriptors(f->hs_descriptors);
- usb_free_descriptors(f->descriptors);
+ usb_free_all_descriptors(f);
kfree(hidg->report_desc);
kfree(hidg);
diff --git a/drivers/usb/gadget/f_loopback.c b/drivers/usb/gadget/f_loopback.c
index 7275706..bb39cb2 100644
--- a/drivers/usb/gadget/f_loopback.c
+++ b/drivers/usb/gadget/f_loopback.c
@@ -177,6 +177,7 @@
struct usb_composite_dev *cdev = c->cdev;
struct f_loopback *loop = func_to_loop(f);
int id;
+ int ret;
/* allocate interface ID(s) */
id = usb_interface_id(c, f);
@@ -201,22 +202,19 @@
loop->out_ep->driver_data = cdev; /* claim */
/* support high speed hardware */
- if (gadget_is_dualspeed(c->cdev->gadget)) {
- hs_loop_source_desc.bEndpointAddress =
- fs_loop_source_desc.bEndpointAddress;
- hs_loop_sink_desc.bEndpointAddress =
- fs_loop_sink_desc.bEndpointAddress;
- f->hs_descriptors = hs_loopback_descs;
- }
+ hs_loop_source_desc.bEndpointAddress =
+ fs_loop_source_desc.bEndpointAddress;
+ hs_loop_sink_desc.bEndpointAddress = fs_loop_sink_desc.bEndpointAddress;
/* support super speed hardware */
- if (gadget_is_superspeed(c->cdev->gadget)) {
- ss_loop_source_desc.bEndpointAddress =
- fs_loop_source_desc.bEndpointAddress;
- ss_loop_sink_desc.bEndpointAddress =
- fs_loop_sink_desc.bEndpointAddress;
- f->ss_descriptors = ss_loopback_descs;
- }
+ ss_loop_source_desc.bEndpointAddress =
+ fs_loop_source_desc.bEndpointAddress;
+ ss_loop_sink_desc.bEndpointAddress = fs_loop_sink_desc.bEndpointAddress;
+
+ ret = usb_assign_descriptors(f, fs_loopback_descs, hs_loopback_descs,
+ ss_loopback_descs);
+ if (ret)
+ return ret;
DBG(cdev, "%s speed %s: IN/%s, OUT/%s\n",
(gadget_is_superspeed(c->cdev->gadget) ? "super" :
@@ -228,6 +226,7 @@
static void
loopback_unbind(struct usb_configuration *c, struct usb_function *f)
{
+ usb_free_all_descriptors(f);
kfree(func_to_loop(f));
}
@@ -379,7 +378,6 @@
return -ENOMEM;
loop->function.name = "loopback";
- loop->function.descriptors = fs_loopback_descs;
loop->function.bind = loopback_bind;
loop->function.unbind = loopback_unbind;
loop->function.set_alt = loopback_set_alt;
diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c
index 3a7668b..5d027b3 100644
--- a/drivers/usb/gadget/f_mass_storage.c
+++ b/drivers/usb/gadget/f_mass_storage.c
@@ -228,10 +228,6 @@
static const char fsg_string_interface[] = "Mass Storage";
-#define FSG_NO_DEVICE_STRINGS 1
-#define FSG_NO_OTG 1
-#define FSG_NO_INTR_EP 1
-
#include "storage_common.c"
@@ -2904,9 +2900,7 @@
}
fsg_common_put(common);
- usb_free_descriptors(fsg->function.descriptors);
- usb_free_descriptors(fsg->function.hs_descriptors);
- usb_free_descriptors(fsg->function.ss_descriptors);
+ usb_free_all_descriptors(&fsg->function);
kfree(fsg);
}
@@ -2916,6 +2910,8 @@
struct usb_gadget *gadget = c->cdev->gadget;
int i;
struct usb_ep *ep;
+ unsigned max_burst;
+ int ret;
fsg->gadget = gadget;
@@ -2939,45 +2935,27 @@
ep->driver_data = fsg->common; /* claim the endpoint */
fsg->bulk_out = ep;
- /* Copy descriptors */
- f->descriptors = usb_copy_descriptors(fsg_fs_function);
- if (unlikely(!f->descriptors))
- return -ENOMEM;
+ /* Assume endpoint addresses are the same for both speeds */
+ fsg_hs_bulk_in_desc.bEndpointAddress =
+ fsg_fs_bulk_in_desc.bEndpointAddress;
+ fsg_hs_bulk_out_desc.bEndpointAddress =
+ fsg_fs_bulk_out_desc.bEndpointAddress;
- if (gadget_is_dualspeed(gadget)) {
- /* Assume endpoint addresses are the same for both speeds */
- fsg_hs_bulk_in_desc.bEndpointAddress =
- fsg_fs_bulk_in_desc.bEndpointAddress;
- fsg_hs_bulk_out_desc.bEndpointAddress =
- fsg_fs_bulk_out_desc.bEndpointAddress;
- f->hs_descriptors = usb_copy_descriptors(fsg_hs_function);
- if (unlikely(!f->hs_descriptors)) {
- usb_free_descriptors(f->descriptors);
- return -ENOMEM;
- }
- }
+ /* Calculate bMaxBurst, we know packet size is 1024 */
+ max_burst = min_t(unsigned, FSG_BUFLEN / 1024, 15);
- if (gadget_is_superspeed(gadget)) {
- unsigned max_burst;
+ fsg_ss_bulk_in_desc.bEndpointAddress =
+ fsg_fs_bulk_in_desc.bEndpointAddress;
+ fsg_ss_bulk_in_comp_desc.bMaxBurst = max_burst;
- /* Calculate bMaxBurst, we know packet size is 1024 */
- max_burst = min_t(unsigned, FSG_BUFLEN / 1024, 15);
+ fsg_ss_bulk_out_desc.bEndpointAddress =
+ fsg_fs_bulk_out_desc.bEndpointAddress;
+ fsg_ss_bulk_out_comp_desc.bMaxBurst = max_burst;
- fsg_ss_bulk_in_desc.bEndpointAddress =
- fsg_fs_bulk_in_desc.bEndpointAddress;
- fsg_ss_bulk_in_comp_desc.bMaxBurst = max_burst;
-
- fsg_ss_bulk_out_desc.bEndpointAddress =
- fsg_fs_bulk_out_desc.bEndpointAddress;
- fsg_ss_bulk_out_comp_desc.bMaxBurst = max_burst;
-
- f->ss_descriptors = usb_copy_descriptors(fsg_ss_function);
- if (unlikely(!f->ss_descriptors)) {
- usb_free_descriptors(f->hs_descriptors);
- usb_free_descriptors(f->descriptors);
- return -ENOMEM;
- }
- }
+ ret = usb_assign_descriptors(f, fsg_fs_function, fsg_hs_function,
+ fsg_ss_function);
+ if (ret)
+ goto autoconf_fail;
return 0;
@@ -2986,7 +2964,6 @@
return -ENOTSUPP;
}
-
/****************************** ADD FUNCTION ******************************/
static struct usb_gadget_strings *fsg_strings_array[] = {
diff --git a/drivers/usb/gadget/f_midi.c b/drivers/usb/gadget/f_midi.c
index 8ed1259..263e721 100644
--- a/drivers/usb/gadget/f_midi.c
+++ b/drivers/usb/gadget/f_midi.c
@@ -414,7 +414,7 @@
kfree(midi->id);
midi->id = NULL;
- usb_free_descriptors(f->descriptors);
+ usb_free_all_descriptors(f);
kfree(midi);
}
@@ -881,19 +881,25 @@
* both speeds
*/
/* copy descriptors, and track endpoint copies */
+ f->fs_descriptors = usb_copy_descriptors(midi_function);
+ if (!f->fs_descriptors)
+ goto fail_f_midi;
+
if (gadget_is_dualspeed(c->cdev->gadget)) {
- c->highspeed = true;
bulk_in_desc.wMaxPacketSize = cpu_to_le16(512);
bulk_out_desc.wMaxPacketSize = cpu_to_le16(512);
f->hs_descriptors = usb_copy_descriptors(midi_function);
- } else {
- f->descriptors = usb_copy_descriptors(midi_function);
+ if (!f->hs_descriptors)
+ goto fail_f_midi;
}
kfree(midi_function);
return 0;
+fail_f_midi:
+ kfree(midi_function);
+ usb_free_descriptors(f->hs_descriptors);
fail:
/* we might as well release our claims on endpoints */
if (midi->out_ep)
diff --git a/drivers/usb/gadget/f_ncm.c b/drivers/usb/gadget/f_ncm.c
index b651b52..6c8362f 100644
--- a/drivers/usb/gadget/f_ncm.c
+++ b/drivers/usb/gadget/f_ncm.c
@@ -102,7 +102,7 @@
USB_CDC_NCM_NTB32_SUPPORTED)
static struct usb_cdc_ncm_ntb_parameters ntb_parameters = {
- .wLength = sizeof ntb_parameters,
+ .wLength = cpu_to_le16(sizeof(ntb_parameters)),
.bmNtbFormatsSupported = cpu_to_le16(FORMATS_SUPPORTED),
.dwNtbInMaxSize = cpu_to_le32(NTB_DEFAULT_IN_SIZE),
.wNdpInDivisor = cpu_to_le16(4),
@@ -121,7 +121,7 @@
* waste less bandwidth.
*/
-#define LOG2_STATUS_INTERVAL_MSEC 5 /* 1 << 5 == 32 msec */
+#define NCM_STATUS_INTERVAL_MS 32
#define NCM_STATUS_BYTECOUNT 16 /* 8 byte header + data */
static struct usb_interface_assoc_descriptor ncm_iad_desc __initdata = {
@@ -230,7 +230,7 @@
.bEndpointAddress = USB_DIR_IN,
.bmAttributes = USB_ENDPOINT_XFER_INT,
.wMaxPacketSize = cpu_to_le16(NCM_STATUS_BYTECOUNT),
- .bInterval = 1 << LOG2_STATUS_INTERVAL_MSEC,
+ .bInterval = NCM_STATUS_INTERVAL_MS,
};
static struct usb_endpoint_descriptor fs_ncm_in_desc __initdata = {
@@ -275,7 +275,7 @@
.bEndpointAddress = USB_DIR_IN,
.bmAttributes = USB_ENDPOINT_XFER_INT,
.wMaxPacketSize = cpu_to_le16(NCM_STATUS_BYTECOUNT),
- .bInterval = LOG2_STATUS_INTERVAL_MSEC + 4,
+ .bInterval = USB_MS_TO_HS_INTERVAL(NCM_STATUS_INTERVAL_MS),
};
static struct usb_endpoint_descriptor hs_ncm_in_desc __initdata = {
.bLength = USB_DT_ENDPOINT_SIZE,
@@ -321,7 +321,7 @@
static struct usb_string ncm_string_defs[] = {
[STRING_CTRL_IDX].s = "CDC Network Control Model (NCM)",
- [STRING_MAC_IDX].s = NULL /* DYNAMIC */,
+ [STRING_MAC_IDX].s = "",
[STRING_DATA_IDX].s = "CDC Network Data",
[STRING_IAD_IDX].s = "CDC NCM",
{ } /* end of list */
@@ -869,15 +869,19 @@
struct sk_buff *skb2;
int ncb_len = 0;
__le16 *tmp;
- int div = ntb_parameters.wNdpInDivisor;
- int rem = ntb_parameters.wNdpInPayloadRemainder;
+ int div;
+ int rem;
int pad;
- int ndp_align = ntb_parameters.wNdpInAlignment;
+ int ndp_align;
int ndp_pad;
unsigned max_size = ncm->port.fixed_in_len;
struct ndp_parser_opts *opts = ncm->parser_opts;
unsigned crc_len = ncm->is_crc ? sizeof(uint32_t) : 0;
+ div = le16_to_cpu(ntb_parameters.wNdpInDivisor);
+ rem = le16_to_cpu(ntb_parameters.wNdpInPayloadRemainder);
+ ndp_align = le16_to_cpu(ntb_parameters.wNdpInAlignment);
+
ncb_len += opts->nth_size;
ndp_pad = ALIGN(ncb_len, ndp_align) - ncb_len;
ncb_len += ndp_pad;
@@ -1208,30 +1212,18 @@
ncm->notify_req->context = ncm;
ncm->notify_req->complete = ncm_notify_complete;
- /* copy descriptors, and track endpoint copies */
- f->descriptors = usb_copy_descriptors(ncm_fs_function);
- if (!f->descriptors)
- goto fail;
-
/*
* support all relevant hardware speeds... we expect that when
* hardware is dual speed, all bulk-capable endpoints work at
* both speeds
*/
- if (gadget_is_dualspeed(c->cdev->gadget)) {
- hs_ncm_in_desc.bEndpointAddress =
- fs_ncm_in_desc.bEndpointAddress;
- hs_ncm_out_desc.bEndpointAddress =
- fs_ncm_out_desc.bEndpointAddress;
- hs_ncm_notify_desc.bEndpointAddress =
- fs_ncm_notify_desc.bEndpointAddress;
+ hs_ncm_in_desc.bEndpointAddress = fs_ncm_in_desc.bEndpointAddress;
+ hs_ncm_out_desc.bEndpointAddress = fs_ncm_out_desc.bEndpointAddress;
+ hs_ncm_notify_desc.bEndpointAddress =
+ fs_ncm_notify_desc.bEndpointAddress;
- /* copy descriptors, and track endpoint copies */
- f->hs_descriptors = usb_copy_descriptors(ncm_hs_function);
- if (!f->hs_descriptors)
- goto fail;
- }
-
+ status = usb_assign_descriptors(f, ncm_fs_function, ncm_hs_function,
+ NULL);
/*
* NOTE: all that is done without knowing or caring about
* the network link ... which is unavailable to this code
@@ -1248,9 +1240,7 @@
return 0;
fail:
- if (f->descriptors)
- usb_free_descriptors(f->descriptors);
-
+ usb_free_all_descriptors(f);
if (ncm->notify_req) {
kfree(ncm->notify_req->buf);
usb_ep_free_request(ncm->notify, ncm->notify_req);
@@ -1259,9 +1249,9 @@
/* we might as well release our claims on endpoints */
if (ncm->notify)
ncm->notify->driver_data = NULL;
- if (ncm->port.out_ep->desc)
+ if (ncm->port.out_ep)
ncm->port.out_ep->driver_data = NULL;
- if (ncm->port.in_ep->desc)
+ if (ncm->port.in_ep)
ncm->port.in_ep->driver_data = NULL;
ERROR(cdev, "%s: can't bind, err %d\n", f->name, status);
@@ -1276,14 +1266,12 @@
DBG(c->cdev, "ncm unbind\n");
- if (gadget_is_dualspeed(c->cdev->gadget))
- usb_free_descriptors(f->hs_descriptors);
- usb_free_descriptors(f->descriptors);
+ ncm_string_defs[0].id = 0;
+ usb_free_all_descriptors(f);
kfree(ncm->notify_req->buf);
usb_ep_free_request(ncm->notify, ncm->notify_req);
- ncm_string_defs[1].s = NULL;
kfree(ncm);
}
@@ -1307,37 +1295,19 @@
if (!can_support_ecm(c->cdev->gadget) || !ethaddr)
return -EINVAL;
- /* maybe allocate device-global string IDs */
if (ncm_string_defs[0].id == 0) {
-
- /* control interface label */
- status = usb_string_id(c->cdev);
+ status = usb_string_ids_tab(c->cdev, ncm_string_defs);
if (status < 0)
return status;
- ncm_string_defs[STRING_CTRL_IDX].id = status;
- ncm_control_intf.iInterface = status;
+ ncm_control_intf.iInterface =
+ ncm_string_defs[STRING_CTRL_IDX].id;
- /* data interface label */
- status = usb_string_id(c->cdev);
- if (status < 0)
- return status;
- ncm_string_defs[STRING_DATA_IDX].id = status;
+ status = ncm_string_defs[STRING_DATA_IDX].id;
ncm_data_nop_intf.iInterface = status;
ncm_data_intf.iInterface = status;
- /* MAC address */
- status = usb_string_id(c->cdev);
- if (status < 0)
- return status;
- ncm_string_defs[STRING_MAC_IDX].id = status;
- ecm_desc.iMACAddress = status;
-
- /* IAD */
- status = usb_string_id(c->cdev);
- if (status < 0)
- return status;
- ncm_string_defs[STRING_IAD_IDX].id = status;
- ncm_iad_desc.iFunction = status;
+ ecm_desc.iMACAddress = ncm_string_defs[STRING_MAC_IDX].id;
+ ncm_iad_desc.iFunction = ncm_string_defs[STRING_IAD_IDX].id;
}
/* allocate and initialize one new instance */
@@ -1347,7 +1317,7 @@
/* export host's Ethernet address in CDC format */
snprintf(ncm->ethaddr, sizeof ncm->ethaddr, "%pm", ethaddr);
- ncm_string_defs[1].s = ncm->ethaddr;
+ ncm_string_defs[STRING_MAC_IDX].s = ncm->ethaddr;
spin_lock_init(&ncm->lock);
ncm_reset_values(ncm);
@@ -1367,9 +1337,7 @@
ncm->port.unwrap = ncm_unwrap_ntb;
status = usb_add_function(c, &ncm->port.func);
- if (status) {
- ncm_string_defs[1].s = NULL;
+ if (status)
kfree(ncm);
- }
return status;
}
diff --git a/drivers/usb/gadget/f_obex.c b/drivers/usb/gadget/f_obex.c
index 5f400f6..d8dd878 100644
--- a/drivers/usb/gadget/f_obex.c
+++ b/drivers/usb/gadget/f_obex.c
@@ -331,23 +331,19 @@
obex->port.out = ep;
ep->driver_data = cdev; /* claim */
- /* copy descriptors, and track endpoint copies */
- f->descriptors = usb_copy_descriptors(fs_function);
-
/* support all relevant hardware speeds... we expect that when
* hardware is dual speed, all bulk-capable endpoints work at
* both speeds
*/
- if (gadget_is_dualspeed(c->cdev->gadget)) {
- obex_hs_ep_in_desc.bEndpointAddress =
- obex_fs_ep_in_desc.bEndpointAddress;
- obex_hs_ep_out_desc.bEndpointAddress =
- obex_fs_ep_out_desc.bEndpointAddress;
+ obex_hs_ep_in_desc.bEndpointAddress =
+ obex_fs_ep_in_desc.bEndpointAddress;
+ obex_hs_ep_out_desc.bEndpointAddress =
+ obex_fs_ep_out_desc.bEndpointAddress;
- /* copy descriptors, and track endpoint copies */
- f->hs_descriptors = usb_copy_descriptors(hs_function);
- }
+ status = usb_assign_descriptors(f, fs_function, hs_function, NULL);
+ if (status)
+ goto fail;
/* Avoid letting this gadget enumerate until the userspace
* OBEX server is active.
@@ -368,6 +364,7 @@
return 0;
fail:
+ usb_free_all_descriptors(f);
/* we might as well release our claims on endpoints */
if (obex->port.out)
obex->port.out->driver_data = NULL;
@@ -382,9 +379,8 @@
static void
obex_unbind(struct usb_configuration *c, struct usb_function *f)
{
- if (gadget_is_dualspeed(c->cdev->gadget))
- usb_free_descriptors(f->hs_descriptors);
- usb_free_descriptors(f->descriptors);
+ obex_string_defs[OBEX_CTRL_IDX].id = 0;
+ usb_free_all_descriptors(f);
kfree(func_to_obex(f));
}
@@ -423,22 +419,16 @@
if (!can_support_obex(c))
return -EINVAL;
- /* maybe allocate device-global string IDs, and patch descriptors */
if (obex_string_defs[OBEX_CTRL_IDX].id == 0) {
- status = usb_string_id(c->cdev);
+ status = usb_string_ids_tab(c->cdev, obex_string_defs);
if (status < 0)
return status;
- obex_string_defs[OBEX_CTRL_IDX].id = status;
+ obex_control_intf.iInterface =
+ obex_string_defs[OBEX_CTRL_IDX].id;
- obex_control_intf.iInterface = status;
-
- status = usb_string_id(c->cdev);
- if (status < 0)
- return status;
- obex_string_defs[OBEX_DATA_IDX].id = status;
-
- obex_data_nop_intf.iInterface =
- obex_data_intf.iInterface = status;
+ status = obex_string_defs[OBEX_DATA_IDX].id;
+ obex_data_nop_intf.iInterface = status;
+ obex_data_intf.iInterface = status;
}
/* allocate and initialize one new instance */
diff --git a/drivers/usb/gadget/f_phonet.c b/drivers/usb/gadget/f_phonet.c
index 8ee9268..b21ab55 100644
--- a/drivers/usb/gadget/f_phonet.c
+++ b/drivers/usb/gadget/f_phonet.c
@@ -515,14 +515,14 @@
fp->in_ep = ep;
ep->driver_data = fp; /* Claim */
- pn_hs_sink_desc.bEndpointAddress =
- pn_fs_sink_desc.bEndpointAddress;
- pn_hs_source_desc.bEndpointAddress =
- pn_fs_source_desc.bEndpointAddress;
+ pn_hs_sink_desc.bEndpointAddress = pn_fs_sink_desc.bEndpointAddress;
+ pn_hs_source_desc.bEndpointAddress = pn_fs_source_desc.bEndpointAddress;
/* Do not try to bind Phonet twice... */
- fp->function.descriptors = fs_pn_function;
- fp->function.hs_descriptors = hs_pn_function;
+ status = usb_assign_descriptors(f, fs_pn_function, hs_pn_function,
+ NULL);
+ if (status)
+ goto err;
/* Incoming USB requests */
status = -ENOMEM;
@@ -531,7 +531,7 @@
req = usb_ep_alloc_request(fp->out_ep, GFP_KERNEL);
if (!req)
- goto err;
+ goto err_req;
req->complete = pn_rx_complete;
fp->out_reqv[i] = req;
@@ -540,14 +540,18 @@
/* Outgoing USB requests */
fp->in_req = usb_ep_alloc_request(fp->in_ep, GFP_KERNEL);
if (!fp->in_req)
- goto err;
+ goto err_req;
INFO(cdev, "USB CDC Phonet function\n");
INFO(cdev, "using %s, OUT %s, IN %s\n", cdev->gadget->name,
fp->out_ep->name, fp->in_ep->name);
return 0;
+err_req:
+ for (i = 0; i < phonet_rxq_size && fp->out_reqv[i]; i++)
+ usb_ep_free_request(fp->out_ep, fp->out_reqv[i]);
err:
+ usb_free_all_descriptors(f);
if (fp->out_ep)
fp->out_ep->driver_data = NULL;
if (fp->in_ep)
@@ -569,6 +573,7 @@
if (fp->out_reqv[i])
usb_ep_free_request(fp->out_ep, fp->out_reqv[i]);
+ usb_free_all_descriptors(f);
kfree(fp);
}
diff --git a/drivers/usb/gadget/f_rndis.c b/drivers/usb/gadget/f_rndis.c
index b1681e4..71beeb8 100644
--- a/drivers/usb/gadget/f_rndis.c
+++ b/drivers/usb/gadget/f_rndis.c
@@ -101,7 +101,7 @@
/*
*/
-#define LOG2_STATUS_INTERVAL_MSEC 5 /* 1 << 5 == 32 msec */
+#define RNDIS_STATUS_INTERVAL_MS 32
#define STATUS_BYTECOUNT 8 /* 8 bytes data */
@@ -190,7 +190,7 @@
.bEndpointAddress = USB_DIR_IN,
.bmAttributes = USB_ENDPOINT_XFER_INT,
.wMaxPacketSize = cpu_to_le16(STATUS_BYTECOUNT),
- .bInterval = 1 << LOG2_STATUS_INTERVAL_MSEC,
+ .bInterval = RNDIS_STATUS_INTERVAL_MS,
};
static struct usb_endpoint_descriptor fs_in_desc = {
@@ -236,7 +236,7 @@
.bEndpointAddress = USB_DIR_IN,
.bmAttributes = USB_ENDPOINT_XFER_INT,
.wMaxPacketSize = cpu_to_le16(STATUS_BYTECOUNT),
- .bInterval = LOG2_STATUS_INTERVAL_MSEC + 4,
+ .bInterval = USB_MS_TO_HS_INTERVAL(RNDIS_STATUS_INTERVAL_MS)
};
static struct usb_endpoint_descriptor hs_in_desc = {
@@ -284,7 +284,7 @@
.bEndpointAddress = USB_DIR_IN,
.bmAttributes = USB_ENDPOINT_XFER_INT,
.wMaxPacketSize = cpu_to_le16(STATUS_BYTECOUNT),
- .bInterval = LOG2_STATUS_INTERVAL_MSEC + 4,
+ .bInterval = USB_MS_TO_HS_INTERVAL(RNDIS_STATUS_INTERVAL_MS)
};
static struct usb_ss_ep_comp_descriptor ss_intr_comp_desc = {
@@ -722,42 +722,22 @@
rndis->notify_req->context = rndis;
rndis->notify_req->complete = rndis_response_complete;
- /* copy descriptors, and track endpoint copies */
- f->descriptors = usb_copy_descriptors(eth_fs_function);
- if (!f->descriptors)
- goto fail;
-
/* support all relevant hardware speeds... we expect that when
* hardware is dual speed, all bulk-capable endpoints work at
* both speeds
*/
- if (gadget_is_dualspeed(c->cdev->gadget)) {
- hs_in_desc.bEndpointAddress =
- fs_in_desc.bEndpointAddress;
- hs_out_desc.bEndpointAddress =
- fs_out_desc.bEndpointAddress;
- hs_notify_desc.bEndpointAddress =
- fs_notify_desc.bEndpointAddress;
+ hs_in_desc.bEndpointAddress = fs_in_desc.bEndpointAddress;
+ hs_out_desc.bEndpointAddress = fs_out_desc.bEndpointAddress;
+ hs_notify_desc.bEndpointAddress = fs_notify_desc.bEndpointAddress;
- /* copy descriptors, and track endpoint copies */
- f->hs_descriptors = usb_copy_descriptors(eth_hs_function);
- if (!f->hs_descriptors)
- goto fail;
- }
+ ss_in_desc.bEndpointAddress = fs_in_desc.bEndpointAddress;
+ ss_out_desc.bEndpointAddress = fs_out_desc.bEndpointAddress;
+ ss_notify_desc.bEndpointAddress = fs_notify_desc.bEndpointAddress;
- if (gadget_is_superspeed(c->cdev->gadget)) {
- ss_in_desc.bEndpointAddress =
- fs_in_desc.bEndpointAddress;
- ss_out_desc.bEndpointAddress =
- fs_out_desc.bEndpointAddress;
- ss_notify_desc.bEndpointAddress =
- fs_notify_desc.bEndpointAddress;
-
- /* copy descriptors, and track endpoint copies */
- f->ss_descriptors = usb_copy_descriptors(eth_ss_function);
- if (!f->ss_descriptors)
- goto fail;
- }
+ status = usb_assign_descriptors(f, eth_fs_function, eth_hs_function,
+ eth_ss_function);
+ if (status)
+ goto fail;
rndis->port.open = rndis_open;
rndis->port.close = rndis_close;
@@ -788,12 +768,7 @@
return 0;
fail:
- if (gadget_is_superspeed(c->cdev->gadget) && f->ss_descriptors)
- usb_free_descriptors(f->ss_descriptors);
- if (gadget_is_dualspeed(c->cdev->gadget) && f->hs_descriptors)
- usb_free_descriptors(f->hs_descriptors);
- if (f->descriptors)
- usb_free_descriptors(f->descriptors);
+ usb_free_all_descriptors(f);
if (rndis->notify_req) {
kfree(rndis->notify_req->buf);
@@ -803,9 +778,9 @@
/* we might as well release our claims on endpoints */
if (rndis->notify)
rndis->notify->driver_data = NULL;
- if (rndis->port.out_ep->desc)
+ if (rndis->port.out_ep)
rndis->port.out_ep->driver_data = NULL;
- if (rndis->port.in_ep->desc)
+ if (rndis->port.in_ep)
rndis->port.in_ep->driver_data = NULL;
ERROR(cdev, "%s: can't bind, err %d\n", f->name, status);
@@ -820,13 +795,9 @@
rndis_deregister(rndis->config);
rndis_exit();
- rndis_string_defs[0].id = 0;
- if (gadget_is_superspeed(c->cdev->gadget))
- usb_free_descriptors(f->ss_descriptors);
- if (gadget_is_dualspeed(c->cdev->gadget))
- usb_free_descriptors(f->hs_descriptors);
- usb_free_descriptors(f->descriptors);
+ rndis_string_defs[0].id = 0;
+ usb_free_all_descriptors(f);
kfree(rndis->notify_req->buf);
usb_ep_free_request(rndis->notify, rndis->notify_req);
@@ -851,34 +822,19 @@
if (!can_support_rndis(c) || !ethaddr)
return -EINVAL;
- /* maybe allocate device-global string IDs */
if (rndis_string_defs[0].id == 0) {
-
/* ... and setup RNDIS itself */
status = rndis_init();
if (status < 0)
return status;
- /* control interface label */
- status = usb_string_id(c->cdev);
- if (status < 0)
+ status = usb_string_ids_tab(c->cdev, rndis_string_defs);
+ if (status)
return status;
- rndis_string_defs[0].id = status;
- rndis_control_intf.iInterface = status;
- /* data interface label */
- status = usb_string_id(c->cdev);
- if (status < 0)
- return status;
- rndis_string_defs[1].id = status;
- rndis_data_intf.iInterface = status;
-
- /* IAD iFunction label */
- status = usb_string_id(c->cdev);
- if (status < 0)
- return status;
- rndis_string_defs[2].id = status;
- rndis_iad_descriptor.iFunction = status;
+ rndis_control_intf.iInterface = rndis_string_defs[0].id;
+ rndis_data_intf.iInterface = rndis_string_defs[1].id;
+ rndis_iad_descriptor.iFunction = rndis_string_defs[2].id;
}
/* allocate and initialize one new instance */
diff --git a/drivers/usb/gadget/f_serial.c b/drivers/usb/gadget/f_serial.c
index 07197d6..98fa779 100644
--- a/drivers/usb/gadget/f_serial.c
+++ b/drivers/usb/gadget/f_serial.c
@@ -213,34 +213,20 @@
gser->port.out = ep;
ep->driver_data = cdev; /* claim */
- /* copy descriptors, and track endpoint copies */
- f->descriptors = usb_copy_descriptors(gser_fs_function);
-
/* support all relevant hardware speeds... we expect that when
* hardware is dual speed, all bulk-capable endpoints work at
* both speeds
*/
- if (gadget_is_dualspeed(c->cdev->gadget)) {
- gser_hs_in_desc.bEndpointAddress =
- gser_fs_in_desc.bEndpointAddress;
- gser_hs_out_desc.bEndpointAddress =
- gser_fs_out_desc.bEndpointAddress;
+ gser_hs_in_desc.bEndpointAddress = gser_fs_in_desc.bEndpointAddress;
+ gser_hs_out_desc.bEndpointAddress = gser_fs_out_desc.bEndpointAddress;
- /* copy descriptors, and track endpoint copies */
- f->hs_descriptors = usb_copy_descriptors(gser_hs_function);
- }
- if (gadget_is_superspeed(c->cdev->gadget)) {
- gser_ss_in_desc.bEndpointAddress =
- gser_fs_in_desc.bEndpointAddress;
- gser_ss_out_desc.bEndpointAddress =
- gser_fs_out_desc.bEndpointAddress;
+ gser_ss_in_desc.bEndpointAddress = gser_fs_in_desc.bEndpointAddress;
+ gser_ss_out_desc.bEndpointAddress = gser_fs_out_desc.bEndpointAddress;
- /* copy descriptors, and track endpoint copies */
- f->ss_descriptors = usb_copy_descriptors(gser_ss_function);
- if (!f->ss_descriptors)
- goto fail;
- }
-
+ status = usb_assign_descriptors(f, gser_fs_function, gser_hs_function,
+ gser_ss_function);
+ if (status)
+ goto fail;
DBG(cdev, "generic ttyGS%d: %s speed IN/%s OUT/%s\n",
gser->port_num,
gadget_is_superspeed(c->cdev->gadget) ? "super" :
@@ -263,11 +249,7 @@
static void
gser_unbind(struct usb_configuration *c, struct usb_function *f)
{
- if (gadget_is_dualspeed(c->cdev->gadget))
- usb_free_descriptors(f->hs_descriptors);
- if (gadget_is_superspeed(c->cdev->gadget))
- usb_free_descriptors(f->ss_descriptors);
- usb_free_descriptors(f->descriptors);
+ usb_free_all_descriptors(f);
kfree(func_to_gser(f));
}
diff --git a/drivers/usb/gadget/f_sourcesink.c b/drivers/usb/gadget/f_sourcesink.c
index 3c126fd..102d49b 100644
--- a/drivers/usb/gadget/f_sourcesink.c
+++ b/drivers/usb/gadget/f_sourcesink.c
@@ -319,6 +319,7 @@
struct usb_composite_dev *cdev = c->cdev;
struct f_sourcesink *ss = func_to_ss(f);
int id;
+ int ret;
/* allocate interface ID(s) */
id = usb_interface_id(c, f);
@@ -387,64 +388,57 @@
isoc_maxpacket = 1024;
/* support high speed hardware */
- if (gadget_is_dualspeed(c->cdev->gadget)) {
- hs_source_desc.bEndpointAddress =
- fs_source_desc.bEndpointAddress;
- hs_sink_desc.bEndpointAddress =
- fs_sink_desc.bEndpointAddress;
+ hs_source_desc.bEndpointAddress = fs_source_desc.bEndpointAddress;
+ hs_sink_desc.bEndpointAddress = fs_sink_desc.bEndpointAddress;
- /*
- * Fill in the HS isoc descriptors from the module parameters.
- * We assume that the user knows what they are doing and won't
- * give parameters that their UDC doesn't support.
- */
- hs_iso_source_desc.wMaxPacketSize = isoc_maxpacket;
- hs_iso_source_desc.wMaxPacketSize |= isoc_mult << 11;
- hs_iso_source_desc.bInterval = isoc_interval;
- hs_iso_source_desc.bEndpointAddress =
- fs_iso_source_desc.bEndpointAddress;
+ /*
+ * Fill in the HS isoc descriptors from the module parameters.
+ * We assume that the user knows what they are doing and won't
+ * give parameters that their UDC doesn't support.
+ */
+ hs_iso_source_desc.wMaxPacketSize = isoc_maxpacket;
+ hs_iso_source_desc.wMaxPacketSize |= isoc_mult << 11;
+ hs_iso_source_desc.bInterval = isoc_interval;
+ hs_iso_source_desc.bEndpointAddress =
+ fs_iso_source_desc.bEndpointAddress;
- hs_iso_sink_desc.wMaxPacketSize = isoc_maxpacket;
- hs_iso_sink_desc.wMaxPacketSize |= isoc_mult << 11;
- hs_iso_sink_desc.bInterval = isoc_interval;
- hs_iso_sink_desc.bEndpointAddress =
- fs_iso_sink_desc.bEndpointAddress;
-
- f->hs_descriptors = hs_source_sink_descs;
- }
+ hs_iso_sink_desc.wMaxPacketSize = isoc_maxpacket;
+ hs_iso_sink_desc.wMaxPacketSize |= isoc_mult << 11;
+ hs_iso_sink_desc.bInterval = isoc_interval;
+ hs_iso_sink_desc.bEndpointAddress = fs_iso_sink_desc.bEndpointAddress;
/* support super speed hardware */
- if (gadget_is_superspeed(c->cdev->gadget)) {
- ss_source_desc.bEndpointAddress =
- fs_source_desc.bEndpointAddress;
- ss_sink_desc.bEndpointAddress =
- fs_sink_desc.bEndpointAddress;
+ ss_source_desc.bEndpointAddress =
+ fs_source_desc.bEndpointAddress;
+ ss_sink_desc.bEndpointAddress =
+ fs_sink_desc.bEndpointAddress;
- /*
- * Fill in the SS isoc descriptors from the module parameters.
- * We assume that the user knows what they are doing and won't
- * give parameters that their UDC doesn't support.
- */
- ss_iso_source_desc.wMaxPacketSize = isoc_maxpacket;
- ss_iso_source_desc.bInterval = isoc_interval;
- ss_iso_source_comp_desc.bmAttributes = isoc_mult;
- ss_iso_source_comp_desc.bMaxBurst = isoc_maxburst;
- ss_iso_source_comp_desc.wBytesPerInterval =
- isoc_maxpacket * (isoc_mult + 1) * (isoc_maxburst + 1);
- ss_iso_source_desc.bEndpointAddress =
- fs_iso_source_desc.bEndpointAddress;
+ /*
+ * Fill in the SS isoc descriptors from the module parameters.
+ * We assume that the user knows what they are doing and won't
+ * give parameters that their UDC doesn't support.
+ */
+ ss_iso_source_desc.wMaxPacketSize = isoc_maxpacket;
+ ss_iso_source_desc.bInterval = isoc_interval;
+ ss_iso_source_comp_desc.bmAttributes = isoc_mult;
+ ss_iso_source_comp_desc.bMaxBurst = isoc_maxburst;
+ ss_iso_source_comp_desc.wBytesPerInterval =
+ isoc_maxpacket * (isoc_mult + 1) * (isoc_maxburst + 1);
+ ss_iso_source_desc.bEndpointAddress =
+ fs_iso_source_desc.bEndpointAddress;
- ss_iso_sink_desc.wMaxPacketSize = isoc_maxpacket;
- ss_iso_sink_desc.bInterval = isoc_interval;
- ss_iso_sink_comp_desc.bmAttributes = isoc_mult;
- ss_iso_sink_comp_desc.bMaxBurst = isoc_maxburst;
- ss_iso_sink_comp_desc.wBytesPerInterval =
- isoc_maxpacket * (isoc_mult + 1) * (isoc_maxburst + 1);
- ss_iso_sink_desc.bEndpointAddress =
- fs_iso_sink_desc.bEndpointAddress;
+ ss_iso_sink_desc.wMaxPacketSize = isoc_maxpacket;
+ ss_iso_sink_desc.bInterval = isoc_interval;
+ ss_iso_sink_comp_desc.bmAttributes = isoc_mult;
+ ss_iso_sink_comp_desc.bMaxBurst = isoc_maxburst;
+ ss_iso_sink_comp_desc.wBytesPerInterval =
+ isoc_maxpacket * (isoc_mult + 1) * (isoc_maxburst + 1);
+ ss_iso_sink_desc.bEndpointAddress = fs_iso_sink_desc.bEndpointAddress;
- f->ss_descriptors = ss_source_sink_descs;
- }
+ ret = usb_assign_descriptors(f, fs_source_sink_descs,
+ hs_source_sink_descs, ss_source_sink_descs);
+ if (ret)
+ return ret;
DBG(cdev, "%s speed %s: IN/%s, OUT/%s, ISO-IN/%s, ISO-OUT/%s\n",
(gadget_is_superspeed(c->cdev->gadget) ? "super" :
@@ -458,6 +452,7 @@
static void
sourcesink_unbind(struct usb_configuration *c, struct usb_function *f)
{
+ usb_free_all_descriptors(f);
kfree(func_to_ss(f));
}
@@ -773,7 +768,6 @@
return -ENOMEM;
ss->function.name = "source/sink";
- ss->function.descriptors = fs_source_sink_descs;
ss->function.bind = sourcesink_bind;
ss->function.unbind = sourcesink_unbind;
ss->function.set_alt = sourcesink_set_alt;
diff --git a/drivers/usb/gadget/f_subset.c b/drivers/usb/gadget/f_subset.c
index 4060c0b..f172bd1 100644
--- a/drivers/usb/gadget/f_subset.c
+++ b/drivers/usb/gadget/f_subset.c
@@ -236,7 +236,7 @@
static struct usb_string geth_string_defs[] = {
[0].s = "CDC Ethernet Subset/SAFE",
- [1].s = NULL /* DYNAMIC */,
+ [1].s = "",
{ } /* end of list */
};
@@ -319,38 +319,22 @@
geth->port.out_ep = ep;
ep->driver_data = cdev; /* claim */
- /* copy descriptors, and track endpoint copies */
- f->descriptors = usb_copy_descriptors(fs_eth_function);
- if (!f->descriptors)
- goto fail;
-
/* support all relevant hardware speeds... we expect that when
* hardware is dual speed, all bulk-capable endpoints work at
* both speeds
*/
- if (gadget_is_dualspeed(c->cdev->gadget)) {
- hs_subset_in_desc.bEndpointAddress =
- fs_subset_in_desc.bEndpointAddress;
- hs_subset_out_desc.bEndpointAddress =
- fs_subset_out_desc.bEndpointAddress;
+ hs_subset_in_desc.bEndpointAddress = fs_subset_in_desc.bEndpointAddress;
+ hs_subset_out_desc.bEndpointAddress =
+ fs_subset_out_desc.bEndpointAddress;
- /* copy descriptors, and track endpoint copies */
- f->hs_descriptors = usb_copy_descriptors(hs_eth_function);
- if (!f->hs_descriptors)
- goto fail;
- }
+ ss_subset_in_desc.bEndpointAddress = fs_subset_in_desc.bEndpointAddress;
+ ss_subset_out_desc.bEndpointAddress =
+ fs_subset_out_desc.bEndpointAddress;
- if (gadget_is_superspeed(c->cdev->gadget)) {
- ss_subset_in_desc.bEndpointAddress =
- fs_subset_in_desc.bEndpointAddress;
- ss_subset_out_desc.bEndpointAddress =
- fs_subset_out_desc.bEndpointAddress;
-
- /* copy descriptors, and track endpoint copies */
- f->ss_descriptors = usb_copy_descriptors(ss_eth_function);
- if (!f->ss_descriptors)
- goto fail;
- }
+ status = usb_assign_descriptors(f, fs_eth_function, hs_eth_function,
+ ss_eth_function);
+ if (status)
+ goto fail;
/* NOTE: all that is done without knowing or caring about
* the network link ... which is unavailable to this code
@@ -364,15 +348,11 @@
return 0;
fail:
- if (f->descriptors)
- usb_free_descriptors(f->descriptors);
- if (f->hs_descriptors)
- usb_free_descriptors(f->hs_descriptors);
-
+ usb_free_all_descriptors(f);
/* we might as well release our claims on endpoints */
- if (geth->port.out_ep->desc)
+ if (geth->port.out_ep)
geth->port.out_ep->driver_data = NULL;
- if (geth->port.in_ep->desc)
+ if (geth->port.in_ep)
geth->port.in_ep->driver_data = NULL;
ERROR(cdev, "%s: can't bind, err %d\n", f->name, status);
@@ -383,12 +363,8 @@
static void
geth_unbind(struct usb_configuration *c, struct usb_function *f)
{
- if (gadget_is_superspeed(c->cdev->gadget))
- usb_free_descriptors(f->ss_descriptors);
- if (gadget_is_dualspeed(c->cdev->gadget))
- usb_free_descriptors(f->hs_descriptors);
- usb_free_descriptors(f->descriptors);
- geth_string_defs[1].s = NULL;
+ geth_string_defs[0].id = 0;
+ usb_free_all_descriptors(f);
kfree(func_to_geth(f));
}
@@ -414,20 +390,11 @@
/* maybe allocate device-global string IDs */
if (geth_string_defs[0].id == 0) {
-
- /* interface label */
- status = usb_string_id(c->cdev);
+ status = usb_string_ids_tab(c->cdev, geth_string_defs);
if (status < 0)
return status;
- geth_string_defs[0].id = status;
- subset_data_intf.iInterface = status;
-
- /* MAC address */
- status = usb_string_id(c->cdev);
- if (status < 0)
- return status;
- geth_string_defs[1].id = status;
- ether_desc.iMACAddress = status;
+ subset_data_intf.iInterface = geth_string_defs[0].id;
+ ether_desc.iMACAddress = geth_string_defs[1].id;
}
/* allocate and initialize one new instance */
@@ -449,9 +416,7 @@
geth->port.func.disable = geth_disable;
status = usb_add_function(c, &geth->port.func);
- if (status) {
- geth_string_defs[1].s = NULL;
+ if (status)
kfree(geth);
- }
return status;
}
diff --git a/drivers/usb/gadget/f_uac1.c b/drivers/usb/gadget/f_uac1.c
index 1a5dcd5..f570e66 100644
--- a/drivers/usb/gadget/f_uac1.c
+++ b/drivers/usb/gadget/f_uac1.c
@@ -630,7 +630,7 @@
struct usb_composite_dev *cdev = c->cdev;
struct f_audio *audio = func_to_audio(f);
int status;
- struct usb_ep *ep;
+ struct usb_ep *ep = NULL;
f_audio_build_desc(audio);
@@ -659,22 +659,14 @@
status = -ENOMEM;
/* copy descriptors, and track endpoint copies */
- f->descriptors = usb_copy_descriptors(f_audio_desc);
-
- /*
- * support all relevant hardware speeds... we expect that when
- * hardware is dual speed, all bulk-capable endpoints work at
- * both speeds
- */
- if (gadget_is_dualspeed(c->cdev->gadget)) {
- c->highspeed = true;
- f->hs_descriptors = usb_copy_descriptors(f_audio_desc);
- }
-
+ status = usb_assign_descriptors(f, f_audio_desc, f_audio_desc, NULL);
+ if (status)
+ goto fail;
return 0;
fail:
-
+ if (ep)
+ ep->driver_data = NULL;
return status;
}
@@ -683,8 +675,7 @@
{
struct f_audio *audio = func_to_audio(f);
- usb_free_descriptors(f->descriptors);
- usb_free_descriptors(f->hs_descriptors);
+ usb_free_all_descriptors(f);
kfree(audio);
}
diff --git a/drivers/usb/gadget/f_uac2.c b/drivers/usb/gadget/f_uac2.c
index d3c6cff..d7da258 100644
--- a/drivers/usb/gadget/f_uac2.c
+++ b/drivers/usb/gadget/f_uac2.c
@@ -50,13 +50,6 @@
module_param(c_ssize, uint, S_IRUGO);
MODULE_PARM_DESC(c_ssize, "Capture Sample Size(bytes)");
-#define DMA_ADDR_INVALID (~(dma_addr_t)0)
-
-#define ALT_SET(x, a) do {(x) &= ~0xff; (x) |= (a); } while (0)
-#define ALT_GET(x) ((x) & 0xff)
-#define INTF_SET(x, i) do {(x) &= 0xff; (x) |= ((i) << 8); } while (0)
-#define INTF_GET(x) ((x >> 8) & 0xff)
-
/* Keep everyone on toes */
#define USB_XFERS 2
@@ -144,8 +137,9 @@
};
struct audio_dev {
- /* Currently active {Interface[15:8] | AltSettings[7:0]} */
- __u16 ac_alt, as_out_alt, as_in_alt;
+ u8 ac_intf, ac_alt;
+ u8 as_out_intf, as_out_alt;
+ u8 as_in_intf, as_in_alt;
struct usb_ep *in_ep, *out_ep;
struct usb_function func;
@@ -408,7 +402,7 @@
.prepare = uac2_pcm_null,
};
-static int __devinit snd_uac2_probe(struct platform_device *pdev)
+static int snd_uac2_probe(struct platform_device *pdev)
{
struct snd_uac2_chip *uac2 = pdev_to_uac2(pdev);
struct snd_card *card;
@@ -526,32 +520,22 @@
STR_AS_IN_ALT1,
};
-static const char ifassoc[] = "Source/Sink";
-static const char ifctrl[] = "Topology Control";
static char clksrc_in[8];
static char clksrc_out[8];
-static const char usb_it[] = "USBH Out";
-static const char io_it[] = "USBD Out";
-static const char usb_ot[] = "USBH In";
-static const char io_ot[] = "USBD In";
-static const char out_alt0[] = "Playback Inactive";
-static const char out_alt1[] = "Playback Active";
-static const char in_alt0[] = "Capture Inactive";
-static const char in_alt1[] = "Capture Active";
static struct usb_string strings_fn[] = {
- [STR_ASSOC].s = ifassoc,
- [STR_IF_CTRL].s = ifctrl,
+ [STR_ASSOC].s = "Source/Sink",
+ [STR_IF_CTRL].s = "Topology Control",
[STR_CLKSRC_IN].s = clksrc_in,
[STR_CLKSRC_OUT].s = clksrc_out,
- [STR_USB_IT].s = usb_it,
- [STR_IO_IT].s = io_it,
- [STR_USB_OT].s = usb_ot,
- [STR_IO_OT].s = io_ot,
- [STR_AS_OUT_ALT0].s = out_alt0,
- [STR_AS_OUT_ALT1].s = out_alt1,
- [STR_AS_IN_ALT0].s = in_alt0,
- [STR_AS_IN_ALT1].s = in_alt1,
+ [STR_USB_IT].s = "USBH Out",
+ [STR_IO_IT].s = "USBD Out",
+ [STR_USB_OT].s = "USBH In",
+ [STR_IO_OT].s = "USBD In",
+ [STR_AS_OUT_ALT0].s = "Playback Inactive",
+ [STR_AS_OUT_ALT1].s = "Playback Active",
+ [STR_AS_IN_ALT0].s = "Capture Inactive",
+ [STR_AS_IN_ALT1].s = "Capture Active",
{ },
};
@@ -952,8 +936,8 @@
return ret;
}
std_ac_if_desc.bInterfaceNumber = ret;
- ALT_SET(agdev->ac_alt, 0);
- INTF_SET(agdev->ac_alt, ret);
+ agdev->ac_intf = ret;
+ agdev->ac_alt = 0;
ret = usb_interface_id(cfg, fn);
if (ret < 0) {
@@ -963,8 +947,8 @@
}
std_as_out_if0_desc.bInterfaceNumber = ret;
std_as_out_if1_desc.bInterfaceNumber = ret;
- ALT_SET(agdev->as_out_alt, 0);
- INTF_SET(agdev->as_out_alt, ret);
+ agdev->as_out_intf = ret;
+ agdev->as_out_alt = 0;
ret = usb_interface_id(cfg, fn);
if (ret < 0) {
@@ -974,19 +958,23 @@
}
std_as_in_if0_desc.bInterfaceNumber = ret;
std_as_in_if1_desc.bInterfaceNumber = ret;
- ALT_SET(agdev->as_in_alt, 0);
- INTF_SET(agdev->as_in_alt, ret);
+ agdev->as_in_intf = ret;
+ agdev->as_in_alt = 0;
agdev->out_ep = usb_ep_autoconfig(gadget, &fs_epout_desc);
- if (!agdev->out_ep)
+ if (!agdev->out_ep) {
dev_err(&uac2->pdev.dev,
"%s:%d Error!\n", __func__, __LINE__);
+ goto err;
+ }
agdev->out_ep->driver_data = agdev;
agdev->in_ep = usb_ep_autoconfig(gadget, &fs_epin_desc);
- if (!agdev->in_ep)
+ if (!agdev->in_ep) {
dev_err(&uac2->pdev.dev,
"%s:%d Error!\n", __func__, __LINE__);
+ goto err;
+ }
agdev->in_ep->driver_data = agdev;
hs_epout_desc.bEndpointAddress = fs_epout_desc.bEndpointAddress;
@@ -994,9 +982,9 @@
hs_epin_desc.bEndpointAddress = fs_epin_desc.bEndpointAddress;
hs_epin_desc.wMaxPacketSize = fs_epin_desc.wMaxPacketSize;
- fn->descriptors = usb_copy_descriptors(fs_audio_desc);
- if (gadget_is_dualspeed(gadget))
- fn->hs_descriptors = usb_copy_descriptors(hs_audio_desc);
+ ret = usb_assign_descriptors(fn, fs_audio_desc, hs_audio_desc, NULL);
+ if (ret)
+ goto err;
prm = &agdev->uac2.c_prm;
prm->max_psize = hs_epout_desc.wMaxPacketSize;
@@ -1005,6 +993,7 @@
prm->max_psize = 0;
dev_err(&uac2->pdev.dev,
"%s:%d Error!\n", __func__, __LINE__);
+ goto err;
}
prm = &agdev->uac2.p_prm;
@@ -1014,17 +1003,28 @@
prm->max_psize = 0;
dev_err(&uac2->pdev.dev,
"%s:%d Error!\n", __func__, __LINE__);
+ goto err;
}
- return alsa_uac2_init(agdev);
+ ret = alsa_uac2_init(agdev);
+ if (ret)
+ goto err;
+ return 0;
+err:
+ kfree(agdev->uac2.p_prm.rbuf);
+ kfree(agdev->uac2.c_prm.rbuf);
+ usb_free_all_descriptors(fn);
+ if (agdev->in_ep)
+ agdev->in_ep->driver_data = NULL;
+ if (agdev->out_ep)
+ agdev->out_ep->driver_data = NULL;
+ return -EINVAL;
}
static void
afunc_unbind(struct usb_configuration *cfg, struct usb_function *fn)
{
struct audio_dev *agdev = func_to_agdev(fn);
- struct usb_composite_dev *cdev = cfg->cdev;
- struct usb_gadget *gadget = cdev->gadget;
struct uac2_rtd_params *prm;
alsa_uac2_exit(agdev);
@@ -1034,10 +1034,7 @@
prm = &agdev->uac2.c_prm;
kfree(prm->rbuf);
-
- if (gadget_is_dualspeed(gadget))
- usb_free_descriptors(fn->hs_descriptors);
- usb_free_descriptors(fn->descriptors);
+ usb_free_all_descriptors(fn);
if (agdev->in_ep)
agdev->in_ep->driver_data = NULL;
@@ -1064,7 +1061,7 @@
return -EINVAL;
}
- if (intf == INTF_GET(agdev->ac_alt)) {
+ if (intf == agdev->ac_intf) {
/* Control I/f has only 1 AltSetting - 0 */
if (alt) {
dev_err(&uac2->pdev.dev,
@@ -1074,16 +1071,16 @@
return 0;
}
- if (intf == INTF_GET(agdev->as_out_alt)) {
+ if (intf == agdev->as_out_intf) {
ep = agdev->out_ep;
prm = &uac2->c_prm;
config_ep_by_speed(gadget, fn, ep);
- ALT_SET(agdev->as_out_alt, alt);
- } else if (intf == INTF_GET(agdev->as_in_alt)) {
+ agdev->as_out_alt = alt;
+ } else if (intf == agdev->as_in_intf) {
ep = agdev->in_ep;
prm = &uac2->p_prm;
config_ep_by_speed(gadget, fn, ep);
- ALT_SET(agdev->as_in_alt, alt);
+ agdev->as_in_alt = alt;
} else {
dev_err(&uac2->pdev.dev,
"%s:%d Error!\n", __func__, __LINE__);
@@ -1117,7 +1114,6 @@
prm->ureq[i].pp = prm;
req->zero = 0;
- req->dma = DMA_ADDR_INVALID;
req->context = &prm->ureq[i];
req->length = prm->max_psize;
req->complete = agdev_iso_complete;
@@ -1136,12 +1132,12 @@
struct audio_dev *agdev = func_to_agdev(fn);
struct snd_uac2_chip *uac2 = &agdev->uac2;
- if (intf == INTF_GET(agdev->ac_alt))
- return ALT_GET(agdev->ac_alt);
- else if (intf == INTF_GET(agdev->as_out_alt))
- return ALT_GET(agdev->as_out_alt);
- else if (intf == INTF_GET(agdev->as_in_alt))
- return ALT_GET(agdev->as_in_alt);
+ if (intf == agdev->ac_intf)
+ return agdev->ac_alt;
+ else if (intf == agdev->as_out_intf)
+ return agdev->as_out_alt;
+ else if (intf == agdev->as_in_intf)
+ return agdev->as_in_alt;
else
dev_err(&uac2->pdev.dev,
"%s:%d Invalid Interface %d!\n",
@@ -1157,10 +1153,10 @@
struct snd_uac2_chip *uac2 = &agdev->uac2;
free_ep(&uac2->p_prm, agdev->in_ep);
- ALT_SET(agdev->as_in_alt, 0);
+ agdev->as_in_alt = 0;
free_ep(&uac2->c_prm, agdev->out_ep);
- ALT_SET(agdev->as_out_alt, 0);
+ agdev->as_out_alt = 0;
}
static int
@@ -1267,7 +1263,7 @@
u16 w_index = le16_to_cpu(cr->wIndex);
u8 intf = w_index & 0xff;
- if (intf != INTF_GET(agdev->ac_alt)) {
+ if (intf != agdev->ac_intf) {
dev_err(&uac2->pdev.dev,
"%s:%d Error!\n", __func__, __LINE__);
return -EOPNOTSUPP;
@@ -1316,7 +1312,7 @@
static int audio_bind_config(struct usb_configuration *cfg)
{
- int id, res;
+ int res;
agdev_g = kzalloc(sizeof *agdev_g, GFP_KERNEL);
if (agdev_g == NULL) {
@@ -1324,89 +1320,21 @@
return -ENOMEM;
}
- id = usb_string_id(cfg->cdev);
- if (id < 0)
- return id;
-
- strings_fn[STR_ASSOC].id = id;
- iad_desc.iFunction = id,
-
- id = usb_string_id(cfg->cdev);
- if (id < 0)
- return id;
-
- strings_fn[STR_IF_CTRL].id = id;
- std_ac_if_desc.iInterface = id,
-
- id = usb_string_id(cfg->cdev);
- if (id < 0)
- return id;
-
- strings_fn[STR_CLKSRC_IN].id = id;
- in_clk_src_desc.iClockSource = id,
-
- id = usb_string_id(cfg->cdev);
- if (id < 0)
- return id;
-
- strings_fn[STR_CLKSRC_OUT].id = id;
- out_clk_src_desc.iClockSource = id,
-
- id = usb_string_id(cfg->cdev);
- if (id < 0)
- return id;
-
- strings_fn[STR_USB_IT].id = id;
- usb_out_it_desc.iTerminal = id,
-
- id = usb_string_id(cfg->cdev);
- if (id < 0)
- return id;
-
- strings_fn[STR_IO_IT].id = id;
- io_in_it_desc.iTerminal = id;
-
- id = usb_string_id(cfg->cdev);
- if (id < 0)
- return id;
-
- strings_fn[STR_USB_OT].id = id;
- usb_in_ot_desc.iTerminal = id;
-
- id = usb_string_id(cfg->cdev);
- if (id < 0)
- return id;
-
- strings_fn[STR_IO_OT].id = id;
- io_out_ot_desc.iTerminal = id;
-
- id = usb_string_id(cfg->cdev);
- if (id < 0)
- return id;
-
- strings_fn[STR_AS_OUT_ALT0].id = id;
- std_as_out_if0_desc.iInterface = id;
-
- id = usb_string_id(cfg->cdev);
- if (id < 0)
- return id;
-
- strings_fn[STR_AS_OUT_ALT1].id = id;
- std_as_out_if1_desc.iInterface = id;
-
- id = usb_string_id(cfg->cdev);
- if (id < 0)
- return id;
-
- strings_fn[STR_AS_IN_ALT0].id = id;
- std_as_in_if0_desc.iInterface = id;
-
- id = usb_string_id(cfg->cdev);
- if (id < 0)
- return id;
-
- strings_fn[STR_AS_IN_ALT1].id = id;
- std_as_in_if1_desc.iInterface = id;
+ res = usb_string_ids_tab(cfg->cdev, strings_fn);
+ if (res)
+ return res;
+ iad_desc.iFunction = strings_fn[STR_ASSOC].id;
+ std_ac_if_desc.iInterface = strings_fn[STR_IF_CTRL].id;
+ in_clk_src_desc.iClockSource = strings_fn[STR_CLKSRC_IN].id;
+ out_clk_src_desc.iClockSource = strings_fn[STR_CLKSRC_OUT].id;
+ usb_out_it_desc.iTerminal = strings_fn[STR_USB_IT].id;
+ io_in_it_desc.iTerminal = strings_fn[STR_IO_IT].id;
+ usb_in_ot_desc.iTerminal = strings_fn[STR_USB_OT].id;
+ io_out_ot_desc.iTerminal = strings_fn[STR_IO_OT].id;
+ std_as_out_if0_desc.iInterface = strings_fn[STR_AS_OUT_ALT0].id;
+ std_as_out_if1_desc.iInterface = strings_fn[STR_AS_OUT_ALT1].id;
+ std_as_in_if0_desc.iInterface = strings_fn[STR_AS_IN_ALT0].id;
+ std_as_in_if1_desc.iInterface = strings_fn[STR_AS_IN_ALT1].id;
agdev_g->func.name = "uac2_func";
agdev_g->func.strings = fn_strings;
diff --git a/drivers/usb/gadget/f_uvc.c b/drivers/usb/gadget/f_uvc.c
index 2a8bf06..5b629876 100644
--- a/drivers/usb/gadget/f_uvc.c
+++ b/drivers/usb/gadget/f_uvc.c
@@ -417,7 +417,6 @@
return -ENOMEM;
video->parent = &cdev->gadget->dev;
- video->minor = -1;
video->fops = &uvc_v4l2_fops;
video->release = video_device_release;
strncpy(video->name, cdev->gadget->name, sizeof(video->name));
@@ -577,27 +576,15 @@
INFO(cdev, "uvc_function_unbind\n");
- if (uvc->vdev) {
- if (uvc->vdev->minor == -1)
- video_device_release(uvc->vdev);
- else
- video_unregister_device(uvc->vdev);
- uvc->vdev = NULL;
- }
+ video_unregister_device(uvc->vdev);
+ uvc->control_ep->driver_data = NULL;
+ uvc->video.ep->driver_data = NULL;
- if (uvc->control_ep)
- uvc->control_ep->driver_data = NULL;
- if (uvc->video.ep)
- uvc->video.ep->driver_data = NULL;
+ uvc_en_us_strings[UVC_STRING_ASSOCIATION_IDX].id = 0;
+ usb_ep_free_request(cdev->gadget->ep0, uvc->control_req);
+ kfree(uvc->control_buf);
- if (uvc->control_req) {
- usb_ep_free_request(cdev->gadget->ep0, uvc->control_req);
- kfree(uvc->control_buf);
- }
-
- kfree(f->descriptors);
- kfree(f->hs_descriptors);
- kfree(f->ss_descriptors);
+ usb_free_all_descriptors(f);
kfree(uvc);
}
@@ -663,49 +650,40 @@
/* sanity check the streaming endpoint module parameters */
if (streaming_maxpacket > 1024)
streaming_maxpacket = 1024;
+ /*
+ * Fill in the HS descriptors from the module parameters for the Video
+ * Streaming endpoint.
+ * NOTE: We assume that the user knows what they are doing and won't
+ * give parameters that their UDC doesn't support.
+ */
+ uvc_hs_streaming_ep.wMaxPacketSize = streaming_maxpacket;
+ uvc_hs_streaming_ep.wMaxPacketSize |= streaming_mult << 11;
+ uvc_hs_streaming_ep.bInterval = streaming_interval;
+ uvc_hs_streaming_ep.bEndpointAddress =
+ uvc_fs_streaming_ep.bEndpointAddress;
- /* Copy descriptors for FS. */
- f->descriptors = uvc_copy_descriptors(uvc, USB_SPEED_FULL);
+ /*
+ * Fill in the SS descriptors from the module parameters for the Video
+ * Streaming endpoint.
+ * NOTE: We assume that the user knows what they are doing and won't
+ * give parameters that their UDC doesn't support.
+ */
+ uvc_ss_streaming_ep.wMaxPacketSize = streaming_maxpacket;
+ uvc_ss_streaming_ep.bInterval = streaming_interval;
+ uvc_ss_streaming_comp.bmAttributes = streaming_mult;
+ uvc_ss_streaming_comp.bMaxBurst = streaming_maxburst;
+ uvc_ss_streaming_comp.wBytesPerInterval =
+ streaming_maxpacket * (streaming_mult + 1) *
+ (streaming_maxburst + 1);
+ uvc_ss_streaming_ep.bEndpointAddress =
+ uvc_fs_streaming_ep.bEndpointAddress;
- /* support high speed hardware */
- if (gadget_is_dualspeed(cdev->gadget)) {
- /*
- * Fill in the HS descriptors from the module parameters for the
- * Video Streaming endpoint.
- * NOTE: We assume that the user knows what they are doing and
- * won't give parameters that their UDC doesn't support.
- */
- uvc_hs_streaming_ep.wMaxPacketSize = streaming_maxpacket;
- uvc_hs_streaming_ep.wMaxPacketSize |= streaming_mult << 11;
- uvc_hs_streaming_ep.bInterval = streaming_interval;
- uvc_hs_streaming_ep.bEndpointAddress =
- uvc_fs_streaming_ep.bEndpointAddress;
-
- /* Copy descriptors. */
+ /* Copy descriptors */
+ f->fs_descriptors = uvc_copy_descriptors(uvc, USB_SPEED_FULL);
+ if (gadget_is_dualspeed(cdev->gadget))
f->hs_descriptors = uvc_copy_descriptors(uvc, USB_SPEED_HIGH);
- }
-
- /* support super speed hardware */
- if (gadget_is_superspeed(c->cdev->gadget)) {
- /*
- * Fill in the SS descriptors from the module parameters for the
- * Video Streaming endpoint.
- * NOTE: We assume that the user knows what they are doing and
- * won't give parameters that their UDC doesn't support.
- */
- uvc_ss_streaming_ep.wMaxPacketSize = streaming_maxpacket;
- uvc_ss_streaming_ep.bInterval = streaming_interval;
- uvc_ss_streaming_comp.bmAttributes = streaming_mult;
- uvc_ss_streaming_comp.bMaxBurst = streaming_maxburst;
- uvc_ss_streaming_comp.wBytesPerInterval =
- streaming_maxpacket * (streaming_mult + 1) *
- (streaming_maxburst + 1);
- uvc_ss_streaming_ep.bEndpointAddress =
- uvc_fs_streaming_ep.bEndpointAddress;
-
- /* Copy descriptors. */
+ if (gadget_is_superspeed(c->cdev->gadget))
f->ss_descriptors = uvc_copy_descriptors(uvc, USB_SPEED_SUPER);
- }
/* Preallocate control endpoint request. */
uvc->control_req = usb_ep_alloc_request(cdev->gadget->ep0, GFP_KERNEL);
@@ -740,7 +718,20 @@
return 0;
error:
- uvc_function_unbind(c, f);
+ if (uvc->vdev)
+ video_device_release(uvc->vdev);
+
+ if (uvc->control_ep)
+ uvc->control_ep->driver_data = NULL;
+ if (uvc->video.ep)
+ uvc->video.ep->driver_data = NULL;
+
+ if (uvc->control_req) {
+ usb_ep_free_request(cdev->gadget->ep0, uvc->control_req);
+ kfree(uvc->control_buf);
+ }
+
+ usb_free_all_descriptors(f);
return ret;
}
@@ -808,25 +799,16 @@
uvc->desc.hs_streaming = hs_streaming;
uvc->desc.ss_streaming = ss_streaming;
- /* maybe allocate device-global string IDs, and patch descriptors */
+ /* Allocate string descriptor numbers. */
if (uvc_en_us_strings[UVC_STRING_ASSOCIATION_IDX].id == 0) {
- /* Allocate string descriptor numbers. */
- ret = usb_string_id(c->cdev);
- if (ret < 0)
+ ret = usb_string_ids_tab(c->cdev, uvc_en_us_strings);
+ if (ret)
goto error;
- uvc_en_us_strings[UVC_STRING_ASSOCIATION_IDX].id = ret;
- uvc_iad.iFunction = ret;
-
- ret = usb_string_id(c->cdev);
- if (ret < 0)
- goto error;
- uvc_en_us_strings[UVC_STRING_CONTROL_IDX].id = ret;
- uvc_control_intf.iInterface = ret;
-
- ret = usb_string_id(c->cdev);
- if (ret < 0)
- goto error;
- uvc_en_us_strings[UVC_STRING_STREAMING_IDX].id = ret;
+ uvc_iad.iFunction =
+ uvc_en_us_strings[UVC_STRING_ASSOCIATION_IDX].id;
+ uvc_control_intf.iInterface =
+ uvc_en_us_strings[UVC_STRING_CONTROL_IDX].id;
+ ret = uvc_en_us_strings[UVC_STRING_STREAMING_IDX].id;
uvc_streaming_intf_alt0.iInterface = ret;
uvc_streaming_intf_alt1.iInterface = ret;
}
diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c
deleted file mode 100644
index 3f7d640..0000000
--- a/drivers/usb/gadget/file_storage.c
+++ /dev/null
@@ -1,3656 +0,0 @@
-/*
- * file_storage.c -- File-backed USB Storage Gadget, for USB development
- *
- * Copyright (C) 2003-2008 Alan Stern
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions, and the following disclaimer,
- * without modification.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. The names of the above-listed copyright holders may not be used
- * to endorse or promote products derived from this software without
- * specific prior written permission.
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
- * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
- * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
- * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
- * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
- * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
- * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
- * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
- * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-
-/*
- * The File-backed Storage Gadget acts as a USB Mass Storage device,
- * appearing to the host as a disk drive or as a CD-ROM drive. In addition
- * to providing an example of a genuinely useful gadget driver for a USB
- * device, it also illustrates a technique of double-buffering for increased
- * throughput. Last but not least, it gives an easy way to probe the
- * behavior of the Mass Storage drivers in a USB host.
- *
- * Backing storage is provided by a regular file or a block device, specified
- * by the "file" module parameter. Access can be limited to read-only by
- * setting the optional "ro" module parameter. (For CD-ROM emulation,
- * access is always read-only.) The gadget will indicate that it has
- * removable media if the optional "removable" module parameter is set.
- *
- * The gadget supports the Control-Bulk (CB), Control-Bulk-Interrupt (CBI),
- * and Bulk-Only (also known as Bulk-Bulk-Bulk or BBB) transports, selected
- * by the optional "transport" module parameter. It also supports the
- * following protocols: RBC (0x01), ATAPI or SFF-8020i (0x02), QIC-157 (0c03),
- * UFI (0x04), SFF-8070i (0x05), and transparent SCSI (0x06), selected by
- * the optional "protocol" module parameter. In addition, the default
- * Vendor ID, Product ID, release number and serial number can be overridden.
- *
- * There is support for multiple logical units (LUNs), each of which has
- * its own backing file. The number of LUNs can be set using the optional
- * "luns" module parameter (anywhere from 1 to 8), and the corresponding
- * files are specified using comma-separated lists for "file" and "ro".
- * The default number of LUNs is taken from the number of "file" elements;
- * it is 1 if "file" is not given. If "removable" is not set then a backing
- * file must be specified for each LUN. If it is set, then an unspecified
- * or empty backing filename means the LUN's medium is not loaded. Ideally
- * each LUN would be settable independently as a disk drive or a CD-ROM
- * drive, but currently all LUNs have to be the same type. The CD-ROM
- * emulation includes a single data track and no audio tracks; hence there
- * need be only one backing file per LUN.
- *
- * Requirements are modest; only a bulk-in and a bulk-out endpoint are
- * needed (an interrupt-out endpoint is also needed for CBI). The memory
- * requirement amounts to two 16K buffers, size configurable by a parameter.
- * Support is included for both full-speed and high-speed operation.
- *
- * Note that the driver is slightly non-portable in that it assumes a
- * single memory/DMA buffer will be useable for bulk-in, bulk-out, and
- * interrupt-in endpoints. With most device controllers this isn't an
- * issue, but there may be some with hardware restrictions that prevent
- * a buffer from being used by more than one endpoint.
- *
- * Module options:
- *
- * file=filename[,filename...]
- * Required if "removable" is not set, names of
- * the files or block devices used for
- * backing storage
- * serial=HHHH... Required serial number (string of hex chars)
- * ro=b[,b...] Default false, booleans for read-only access
- * removable Default false, boolean for removable media
- * luns=N Default N = number of filenames, number of
- * LUNs to support
- * nofua=b[,b...] Default false, booleans for ignore FUA flag
- * in SCSI WRITE(10,12) commands
- * stall Default determined according to the type of
- * USB device controller (usually true),
- * boolean to permit the driver to halt
- * bulk endpoints
- * cdrom Default false, boolean for whether to emulate
- * a CD-ROM drive
- * transport=XXX Default BBB, transport name (CB, CBI, or BBB)
- * protocol=YYY Default SCSI, protocol name (RBC, 8020 or
- * ATAPI, QIC, UFI, 8070, or SCSI;
- * also 1 - 6)
- * vendor=0xVVVV Default 0x0525 (NetChip), USB Vendor ID
- * product=0xPPPP Default 0xa4a5 (FSG), USB Product ID
- * release=0xRRRR Override the USB release number (bcdDevice)
- * buflen=N Default N=16384, buffer size used (will be
- * rounded down to a multiple of
- * PAGE_CACHE_SIZE)
- *
- * If CONFIG_USB_FILE_STORAGE_TEST is not set, only the "file", "serial", "ro",
- * "removable", "luns", "nofua", "stall", and "cdrom" options are available;
- * default values are used for everything else.
- *
- * The pathnames of the backing files and the ro settings are available in
- * the attribute files "file", "nofua", and "ro" in the lun<n> subdirectory of
- * the gadget's sysfs directory. If the "removable" option is set, writing to
- * these files will simulate ejecting/loading the medium (writing an empty
- * line means eject) and adjusting a write-enable tab. Changes to the ro
- * setting are not allowed when the medium is loaded or if CD-ROM emulation
- * is being used.
- *
- * This gadget driver is heavily based on "Gadget Zero" by David Brownell.
- * The driver's SCSI command interface was based on the "Information
- * technology - Small Computer System Interface - 2" document from
- * X3T9.2 Project 375D, Revision 10L, 7-SEP-93, available at
- * <http://www.t10.org/ftp/t10/drafts/s2/s2-r10l.pdf>. The single exception
- * is opcode 0x23 (READ FORMAT CAPACITIES), which was based on the
- * "Universal Serial Bus Mass Storage Class UFI Command Specification"
- * document, Revision 1.0, December 14, 1998, available at
- * <http://www.usb.org/developers/devclass_docs/usbmass-ufi10.pdf>.
- */
-
-
-/*
- * Driver Design
- *
- * The FSG driver is fairly straightforward. There is a main kernel
- * thread that handles most of the work. Interrupt routines field
- * callbacks from the controller driver: bulk- and interrupt-request
- * completion notifications, endpoint-0 events, and disconnect events.
- * Completion events are passed to the main thread by wakeup calls. Many
- * ep0 requests are handled at interrupt time, but SetInterface,
- * SetConfiguration, and device reset requests are forwarded to the
- * thread in the form of "exceptions" using SIGUSR1 signals (since they
- * should interrupt any ongoing file I/O operations).
- *
- * The thread's main routine implements the standard command/data/status
- * parts of a SCSI interaction. It and its subroutines are full of tests
- * for pending signals/exceptions -- all this polling is necessary since
- * the kernel has no setjmp/longjmp equivalents. (Maybe this is an
- * indication that the driver really wants to be running in userspace.)
- * An important point is that so long as the thread is alive it keeps an
- * open reference to the backing file. This will prevent unmounting
- * the backing file's underlying filesystem and could cause problems
- * during system shutdown, for example. To prevent such problems, the
- * thread catches INT, TERM, and KILL signals and converts them into
- * an EXIT exception.
- *
- * In normal operation the main thread is started during the gadget's
- * fsg_bind() callback and stopped during fsg_unbind(). But it can also
- * exit when it receives a signal, and there's no point leaving the
- * gadget running when the thread is dead. So just before the thread
- * exits, it deregisters the gadget driver. This makes things a little
- * tricky: The driver is deregistered at two places, and the exiting
- * thread can indirectly call fsg_unbind() which in turn can tell the
- * thread to exit. The first problem is resolved through the use of the
- * REGISTERED atomic bitflag; the driver will only be deregistered once.
- * The second problem is resolved by having fsg_unbind() check
- * fsg->state; it won't try to stop the thread if the state is already
- * FSG_STATE_TERMINATED.
- *
- * To provide maximum throughput, the driver uses a circular pipeline of
- * buffer heads (struct fsg_buffhd). In principle the pipeline can be
- * arbitrarily long; in practice the benefits don't justify having more
- * than 2 stages (i.e., double buffering). But it helps to think of the
- * pipeline as being a long one. Each buffer head contains a bulk-in and
- * a bulk-out request pointer (since the buffer can be used for both
- * output and input -- directions always are given from the host's
- * point of view) as well as a pointer to the buffer and various state
- * variables.
- *
- * Use of the pipeline follows a simple protocol. There is a variable
- * (fsg->next_buffhd_to_fill) that points to the next buffer head to use.
- * At any time that buffer head may still be in use from an earlier
- * request, so each buffer head has a state variable indicating whether
- * it is EMPTY, FULL, or BUSY. Typical use involves waiting for the
- * buffer head to be EMPTY, filling the buffer either by file I/O or by
- * USB I/O (during which the buffer head is BUSY), and marking the buffer
- * head FULL when the I/O is complete. Then the buffer will be emptied
- * (again possibly by USB I/O, during which it is marked BUSY) and
- * finally marked EMPTY again (possibly by a completion routine).
- *
- * A module parameter tells the driver to avoid stalling the bulk
- * endpoints wherever the transport specification allows. This is
- * necessary for some UDCs like the SuperH, which cannot reliably clear a
- * halt on a bulk endpoint. However, under certain circumstances the
- * Bulk-only specification requires a stall. In such cases the driver
- * will halt the endpoint and set a flag indicating that it should clear
- * the halt in software during the next device reset. Hopefully this
- * will permit everything to work correctly. Furthermore, although the
- * specification allows the bulk-out endpoint to halt when the host sends
- * too much data, implementing this would cause an unavoidable race.
- * The driver will always use the "no-stall" approach for OUT transfers.
- *
- * One subtle point concerns sending status-stage responses for ep0
- * requests. Some of these requests, such as device reset, can involve
- * interrupting an ongoing file I/O operation, which might take an
- * arbitrarily long time. During that delay the host might give up on
- * the original ep0 request and issue a new one. When that happens the
- * driver should not notify the host about completion of the original
- * request, as the host will no longer be waiting for it. So the driver
- * assigns to each ep0 request a unique tag, and it keeps track of the
- * tag value of the request associated with a long-running exception
- * (device-reset, interface-change, or configuration-change). When the
- * exception handler is finished, the status-stage response is submitted
- * only if the current ep0 request tag is equal to the exception request
- * tag. Thus only the most recently received ep0 request will get a
- * status-stage response.
- *
- * Warning: This driver source file is too long. It ought to be split up
- * into a header file plus about 3 separate .c files, to handle the details
- * of the Gadget, USB Mass Storage, and SCSI protocols.
- */
-
-
-/* #define VERBOSE_DEBUG */
-/* #define DUMP_MSGS */
-
-
-#include <linux/blkdev.h>
-#include <linux/completion.h>
-#include <linux/dcache.h>
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/fcntl.h>
-#include <linux/file.h>
-#include <linux/fs.h>
-#include <linux/kref.h>
-#include <linux/kthread.h>
-#include <linux/limits.h>
-#include <linux/module.h>
-#include <linux/rwsem.h>
-#include <linux/slab.h>
-#include <linux/spinlock.h>
-#include <linux/string.h>
-#include <linux/freezer.h>
-#include <linux/utsname.h>
-
-#include <linux/usb/composite.h>
-#include <linux/usb/ch9.h>
-#include <linux/usb/gadget.h>
-
-#include "gadget_chips.h"
-
-#define DRIVER_DESC "File-backed Storage Gadget"
-#define DRIVER_NAME "g_file_storage"
-#define DRIVER_VERSION "1 September 2010"
-
-static char fsg_string_manufacturer[64];
-static const char fsg_string_product[] = DRIVER_DESC;
-static const char fsg_string_config[] = "Self-powered";
-static const char fsg_string_interface[] = "Mass Storage";
-
-
-#include "storage_common.c"
-
-
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_AUTHOR("Alan Stern");
-MODULE_LICENSE("Dual BSD/GPL");
-
-/*
- * This driver assumes self-powered hardware and has no way for users to
- * trigger remote wakeup. It uses autoconfiguration to select endpoints
- * and endpoint addresses.
- */
-
-
-/*-------------------------------------------------------------------------*/
-
-
-/* Encapsulate the module parameter settings */
-
-static struct {
- char *file[FSG_MAX_LUNS];
- char *serial;
- bool ro[FSG_MAX_LUNS];
- bool nofua[FSG_MAX_LUNS];
- unsigned int num_filenames;
- unsigned int num_ros;
- unsigned int num_nofuas;
- unsigned int nluns;
-
- bool removable;
- bool can_stall;
- bool cdrom;
-
- char *transport_parm;
- char *protocol_parm;
- unsigned short vendor;
- unsigned short product;
- unsigned short release;
- unsigned int buflen;
-
- int transport_type;
- char *transport_name;
- int protocol_type;
- char *protocol_name;
-
-} mod_data = { // Default values
- .transport_parm = "BBB",
- .protocol_parm = "SCSI",
- .removable = 0,
- .can_stall = 1,
- .cdrom = 0,
- .vendor = FSG_VENDOR_ID,
- .product = FSG_PRODUCT_ID,
- .release = 0xffff, // Use controller chip type
- .buflen = 16384,
- };
-
-
-module_param_array_named(file, mod_data.file, charp, &mod_data.num_filenames,
- S_IRUGO);
-MODULE_PARM_DESC(file, "names of backing files or devices");
-
-module_param_named(serial, mod_data.serial, charp, S_IRUGO);
-MODULE_PARM_DESC(serial, "USB serial number");
-
-module_param_array_named(ro, mod_data.ro, bool, &mod_data.num_ros, S_IRUGO);
-MODULE_PARM_DESC(ro, "true to force read-only");
-
-module_param_array_named(nofua, mod_data.nofua, bool, &mod_data.num_nofuas,
- S_IRUGO);
-MODULE_PARM_DESC(nofua, "true to ignore SCSI WRITE(10,12) FUA bit");
-
-module_param_named(luns, mod_data.nluns, uint, S_IRUGO);
-MODULE_PARM_DESC(luns, "number of LUNs");
-
-module_param_named(removable, mod_data.removable, bool, S_IRUGO);
-MODULE_PARM_DESC(removable, "true to simulate removable media");
-
-module_param_named(stall, mod_data.can_stall, bool, S_IRUGO);
-MODULE_PARM_DESC(stall, "false to prevent bulk stalls");
-
-module_param_named(cdrom, mod_data.cdrom, bool, S_IRUGO);
-MODULE_PARM_DESC(cdrom, "true to emulate cdrom instead of disk");
-
-/* In the non-TEST version, only the module parameters listed above
- * are available. */
-#ifdef CONFIG_USB_FILE_STORAGE_TEST
-
-module_param_named(transport, mod_data.transport_parm, charp, S_IRUGO);
-MODULE_PARM_DESC(transport, "type of transport (BBB, CBI, or CB)");
-
-module_param_named(protocol, mod_data.protocol_parm, charp, S_IRUGO);
-MODULE_PARM_DESC(protocol, "type of protocol (RBC, 8020, QIC, UFI, "
- "8070, or SCSI)");
-
-module_param_named(vendor, mod_data.vendor, ushort, S_IRUGO);
-MODULE_PARM_DESC(vendor, "USB Vendor ID");
-
-module_param_named(product, mod_data.product, ushort, S_IRUGO);
-MODULE_PARM_DESC(product, "USB Product ID");
-
-module_param_named(release, mod_data.release, ushort, S_IRUGO);
-MODULE_PARM_DESC(release, "USB release number");
-
-module_param_named(buflen, mod_data.buflen, uint, S_IRUGO);
-MODULE_PARM_DESC(buflen, "I/O buffer size");
-
-#endif /* CONFIG_USB_FILE_STORAGE_TEST */
-
-
-/*
- * These definitions will permit the compiler to avoid generating code for
- * parts of the driver that aren't used in the non-TEST version. Even gcc
- * can recognize when a test of a constant expression yields a dead code
- * path.
- */
-
-#ifdef CONFIG_USB_FILE_STORAGE_TEST
-
-#define transport_is_bbb() (mod_data.transport_type == USB_PR_BULK)
-#define transport_is_cbi() (mod_data.transport_type == USB_PR_CBI)
-#define protocol_is_scsi() (mod_data.protocol_type == USB_SC_SCSI)
-
-#else
-
-#define transport_is_bbb() 1
-#define transport_is_cbi() 0
-#define protocol_is_scsi() 1
-
-#endif /* CONFIG_USB_FILE_STORAGE_TEST */
-
-
-/*-------------------------------------------------------------------------*/
-
-
-struct fsg_dev {
- /* lock protects: state, all the req_busy's, and cbbuf_cmnd */
- spinlock_t lock;
- struct usb_gadget *gadget;
-
- /* filesem protects: backing files in use */
- struct rw_semaphore filesem;
-
- /* reference counting: wait until all LUNs are released */
- struct kref ref;
-
- struct usb_ep *ep0; // Handy copy of gadget->ep0
- struct usb_request *ep0req; // For control responses
- unsigned int ep0_req_tag;
- const char *ep0req_name;
-
- struct usb_request *intreq; // For interrupt responses
- int intreq_busy;
- struct fsg_buffhd *intr_buffhd;
-
- unsigned int bulk_out_maxpacket;
- enum fsg_state state; // For exception handling
- unsigned int exception_req_tag;
-
- u8 config, new_config;
-
- unsigned int running : 1;
- unsigned int bulk_in_enabled : 1;
- unsigned int bulk_out_enabled : 1;
- unsigned int intr_in_enabled : 1;
- unsigned int phase_error : 1;
- unsigned int short_packet_received : 1;
- unsigned int bad_lun_okay : 1;
-
- unsigned long atomic_bitflags;
-#define REGISTERED 0
-#define IGNORE_BULK_OUT 1
-#define SUSPENDED 2
-
- struct usb_ep *bulk_in;
- struct usb_ep *bulk_out;
- struct usb_ep *intr_in;
-
- struct fsg_buffhd *next_buffhd_to_fill;
- struct fsg_buffhd *next_buffhd_to_drain;
-
- int thread_wakeup_needed;
- struct completion thread_notifier;
- struct task_struct *thread_task;
-
- int cmnd_size;
- u8 cmnd[MAX_COMMAND_SIZE];
- enum data_direction data_dir;
- u32 data_size;
- u32 data_size_from_cmnd;
- u32 tag;
- unsigned int lun;
- u32 residue;
- u32 usb_amount_left;
-
- /* The CB protocol offers no way for a host to know when a command
- * has completed. As a result the next command may arrive early,
- * and we will still have to handle it. For that reason we need
- * a buffer to store new commands when using CB (or CBI, which
- * does not oblige a host to wait for command completion either). */
- int cbbuf_cmnd_size;
- u8 cbbuf_cmnd[MAX_COMMAND_SIZE];
-
- unsigned int nluns;
- struct fsg_lun *luns;
- struct fsg_lun *curlun;
- /* Must be the last entry */
- struct fsg_buffhd buffhds[];
-};
-
-typedef void (*fsg_routine_t)(struct fsg_dev *);
-
-static int exception_in_progress(struct fsg_dev *fsg)
-{
- return (fsg->state > FSG_STATE_IDLE);
-}
-
-/* Make bulk-out requests be divisible by the maxpacket size */
-static void set_bulk_out_req_length(struct fsg_dev *fsg,
- struct fsg_buffhd *bh, unsigned int length)
-{
- unsigned int rem;
-
- bh->bulk_out_intended_length = length;
- rem = length % fsg->bulk_out_maxpacket;
- if (rem > 0)
- length += fsg->bulk_out_maxpacket - rem;
- bh->outreq->length = length;
-}
-
-static struct fsg_dev *the_fsg;
-static struct usb_gadget_driver fsg_driver;
-
-
-/*-------------------------------------------------------------------------*/
-
-static int fsg_set_halt(struct fsg_dev *fsg, struct usb_ep *ep)
-{
- const char *name;
-
- if (ep == fsg->bulk_in)
- name = "bulk-in";
- else if (ep == fsg->bulk_out)
- name = "bulk-out";
- else
- name = ep->name;
- DBG(fsg, "%s set halt\n", name);
- return usb_ep_set_halt(ep);
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * DESCRIPTORS ... most are static, but strings and (full) configuration
- * descriptors are built on demand. Also the (static) config and interface
- * descriptors are adjusted during fsg_bind().
- */
-
-/* There is only one configuration. */
-#define CONFIG_VALUE 1
-
-static struct usb_device_descriptor
-device_desc = {
- .bLength = sizeof device_desc,
- .bDescriptorType = USB_DT_DEVICE,
-
- .bcdUSB = cpu_to_le16(0x0200),
- .bDeviceClass = USB_CLASS_PER_INTERFACE,
-
- /* The next three values can be overridden by module parameters */
- .idVendor = cpu_to_le16(FSG_VENDOR_ID),
- .idProduct = cpu_to_le16(FSG_PRODUCT_ID),
- .bcdDevice = cpu_to_le16(0xffff),
-
- .iManufacturer = FSG_STRING_MANUFACTURER,
- .iProduct = FSG_STRING_PRODUCT,
- .iSerialNumber = FSG_STRING_SERIAL,
- .bNumConfigurations = 1,
-};
-
-static struct usb_config_descriptor
-config_desc = {
- .bLength = sizeof config_desc,
- .bDescriptorType = USB_DT_CONFIG,
-
- /* wTotalLength computed by usb_gadget_config_buf() */
- .bNumInterfaces = 1,
- .bConfigurationValue = CONFIG_VALUE,
- .iConfiguration = FSG_STRING_CONFIG,
- .bmAttributes = USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER,
- .bMaxPower = CONFIG_USB_GADGET_VBUS_DRAW / 2,
-};
-
-
-static struct usb_qualifier_descriptor
-dev_qualifier = {
- .bLength = sizeof dev_qualifier,
- .bDescriptorType = USB_DT_DEVICE_QUALIFIER,
-
- .bcdUSB = cpu_to_le16(0x0200),
- .bDeviceClass = USB_CLASS_PER_INTERFACE,
-
- .bNumConfigurations = 1,
-};
-
-static int populate_bos(struct fsg_dev *fsg, u8 *buf)
-{
- memcpy(buf, &fsg_bos_desc, USB_DT_BOS_SIZE);
- buf += USB_DT_BOS_SIZE;
-
- memcpy(buf, &fsg_ext_cap_desc, USB_DT_USB_EXT_CAP_SIZE);
- buf += USB_DT_USB_EXT_CAP_SIZE;
-
- memcpy(buf, &fsg_ss_cap_desc, USB_DT_USB_SS_CAP_SIZE);
-
- return USB_DT_BOS_SIZE + USB_DT_USB_SS_CAP_SIZE
- + USB_DT_USB_EXT_CAP_SIZE;
-}
-
-/*
- * Config descriptors must agree with the code that sets configurations
- * and with code managing interfaces and their altsettings. They must
- * also handle different speeds and other-speed requests.
- */
-static int populate_config_buf(struct usb_gadget *gadget,
- u8 *buf, u8 type, unsigned index)
-{
- enum usb_device_speed speed = gadget->speed;
- int len;
- const struct usb_descriptor_header **function;
-
- if (index > 0)
- return -EINVAL;
-
- if (gadget_is_dualspeed(gadget) && type == USB_DT_OTHER_SPEED_CONFIG)
- speed = (USB_SPEED_FULL + USB_SPEED_HIGH) - speed;
- function = gadget_is_dualspeed(gadget) && speed == USB_SPEED_HIGH
- ? (const struct usb_descriptor_header **)fsg_hs_function
- : (const struct usb_descriptor_header **)fsg_fs_function;
-
- /* for now, don't advertise srp-only devices */
- if (!gadget_is_otg(gadget))
- function++;
-
- len = usb_gadget_config_buf(&config_desc, buf, EP0_BUFSIZE, function);
- ((struct usb_config_descriptor *) buf)->bDescriptorType = type;
- return len;
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-/* These routines may be called in process context or in_irq */
-
-/* Caller must hold fsg->lock */
-static void wakeup_thread(struct fsg_dev *fsg)
-{
- /* Tell the main thread that something has happened */
- fsg->thread_wakeup_needed = 1;
- if (fsg->thread_task)
- wake_up_process(fsg->thread_task);
-}
-
-
-static void raise_exception(struct fsg_dev *fsg, enum fsg_state new_state)
-{
- unsigned long flags;
-
- /* Do nothing if a higher-priority exception is already in progress.
- * If a lower-or-equal priority exception is in progress, preempt it
- * and notify the main thread by sending it a signal. */
- spin_lock_irqsave(&fsg->lock, flags);
- if (fsg->state <= new_state) {
- fsg->exception_req_tag = fsg->ep0_req_tag;
- fsg->state = new_state;
- if (fsg->thread_task)
- send_sig_info(SIGUSR1, SEND_SIG_FORCED,
- fsg->thread_task);
- }
- spin_unlock_irqrestore(&fsg->lock, flags);
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-/* The disconnect callback and ep0 routines. These always run in_irq,
- * except that ep0_queue() is called in the main thread to acknowledge
- * completion of various requests: set config, set interface, and
- * Bulk-only device reset. */
-
-static void fsg_disconnect(struct usb_gadget *gadget)
-{
- struct fsg_dev *fsg = get_gadget_data(gadget);
-
- DBG(fsg, "disconnect or port reset\n");
- raise_exception(fsg, FSG_STATE_DISCONNECT);
-}
-
-
-static int ep0_queue(struct fsg_dev *fsg)
-{
- int rc;
-
- rc = usb_ep_queue(fsg->ep0, fsg->ep0req, GFP_ATOMIC);
- if (rc != 0 && rc != -ESHUTDOWN) {
-
- /* We can't do much more than wait for a reset */
- WARNING(fsg, "error in submission: %s --> %d\n",
- fsg->ep0->name, rc);
- }
- return rc;
-}
-
-static void ep0_complete(struct usb_ep *ep, struct usb_request *req)
-{
- struct fsg_dev *fsg = ep->driver_data;
-
- if (req->actual > 0)
- dump_msg(fsg, fsg->ep0req_name, req->buf, req->actual);
- if (req->status || req->actual != req->length)
- DBG(fsg, "%s --> %d, %u/%u\n", __func__,
- req->status, req->actual, req->length);
- if (req->status == -ECONNRESET) // Request was cancelled
- usb_ep_fifo_flush(ep);
-
- if (req->status == 0 && req->context)
- ((fsg_routine_t) (req->context))(fsg);
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-/* Bulk and interrupt endpoint completion handlers.
- * These always run in_irq. */
-
-static void bulk_in_complete(struct usb_ep *ep, struct usb_request *req)
-{
- struct fsg_dev *fsg = ep->driver_data;
- struct fsg_buffhd *bh = req->context;
-
- if (req->status || req->actual != req->length)
- DBG(fsg, "%s --> %d, %u/%u\n", __func__,
- req->status, req->actual, req->length);
- if (req->status == -ECONNRESET) // Request was cancelled
- usb_ep_fifo_flush(ep);
-
- /* Hold the lock while we update the request and buffer states */
- smp_wmb();
- spin_lock(&fsg->lock);
- bh->inreq_busy = 0;
- bh->state = BUF_STATE_EMPTY;
- wakeup_thread(fsg);
- spin_unlock(&fsg->lock);
-}
-
-static void bulk_out_complete(struct usb_ep *ep, struct usb_request *req)
-{
- struct fsg_dev *fsg = ep->driver_data;
- struct fsg_buffhd *bh = req->context;
-
- dump_msg(fsg, "bulk-out", req->buf, req->actual);
- if (req->status || req->actual != bh->bulk_out_intended_length)
- DBG(fsg, "%s --> %d, %u/%u\n", __func__,
- req->status, req->actual,
- bh->bulk_out_intended_length);
- if (req->status == -ECONNRESET) // Request was cancelled
- usb_ep_fifo_flush(ep);
-
- /* Hold the lock while we update the request and buffer states */
- smp_wmb();
- spin_lock(&fsg->lock);
- bh->outreq_busy = 0;
- bh->state = BUF_STATE_FULL;
- wakeup_thread(fsg);
- spin_unlock(&fsg->lock);
-}
-
-
-#ifdef CONFIG_USB_FILE_STORAGE_TEST
-static void intr_in_complete(struct usb_ep *ep, struct usb_request *req)
-{
- struct fsg_dev *fsg = ep->driver_data;
- struct fsg_buffhd *bh = req->context;
-
- if (req->status || req->actual != req->length)
- DBG(fsg, "%s --> %d, %u/%u\n", __func__,
- req->status, req->actual, req->length);
- if (req->status == -ECONNRESET) // Request was cancelled
- usb_ep_fifo_flush(ep);
-
- /* Hold the lock while we update the request and buffer states */
- smp_wmb();
- spin_lock(&fsg->lock);
- fsg->intreq_busy = 0;
- bh->state = BUF_STATE_EMPTY;
- wakeup_thread(fsg);
- spin_unlock(&fsg->lock);
-}
-
-#else
-static void intr_in_complete(struct usb_ep *ep, struct usb_request *req)
-{}
-#endif /* CONFIG_USB_FILE_STORAGE_TEST */
-
-
-/*-------------------------------------------------------------------------*/
-
-/* Ep0 class-specific handlers. These always run in_irq. */
-
-#ifdef CONFIG_USB_FILE_STORAGE_TEST
-static void received_cbi_adsc(struct fsg_dev *fsg, struct fsg_buffhd *bh)
-{
- struct usb_request *req = fsg->ep0req;
- static u8 cbi_reset_cmnd[6] = {
- SEND_DIAGNOSTIC, 4, 0xff, 0xff, 0xff, 0xff};
-
- /* Error in command transfer? */
- if (req->status || req->length != req->actual ||
- req->actual < 6 || req->actual > MAX_COMMAND_SIZE) {
-
- /* Not all controllers allow a protocol stall after
- * receiving control-out data, but we'll try anyway. */
- fsg_set_halt(fsg, fsg->ep0);
- return; // Wait for reset
- }
-
- /* Is it the special reset command? */
- if (req->actual >= sizeof cbi_reset_cmnd &&
- memcmp(req->buf, cbi_reset_cmnd,
- sizeof cbi_reset_cmnd) == 0) {
-
- /* Raise an exception to stop the current operation
- * and reinitialize our state. */
- DBG(fsg, "cbi reset request\n");
- raise_exception(fsg, FSG_STATE_RESET);
- return;
- }
-
- VDBG(fsg, "CB[I] accept device-specific command\n");
- spin_lock(&fsg->lock);
-
- /* Save the command for later */
- if (fsg->cbbuf_cmnd_size)
- WARNING(fsg, "CB[I] overwriting previous command\n");
- fsg->cbbuf_cmnd_size = req->actual;
- memcpy(fsg->cbbuf_cmnd, req->buf, fsg->cbbuf_cmnd_size);
-
- wakeup_thread(fsg);
- spin_unlock(&fsg->lock);
-}
-
-#else
-static void received_cbi_adsc(struct fsg_dev *fsg, struct fsg_buffhd *bh)
-{}
-#endif /* CONFIG_USB_FILE_STORAGE_TEST */
-
-
-static int class_setup_req(struct fsg_dev *fsg,
- const struct usb_ctrlrequest *ctrl)
-{
- struct usb_request *req = fsg->ep0req;
- int value = -EOPNOTSUPP;
- u16 w_index = le16_to_cpu(ctrl->wIndex);
- u16 w_value = le16_to_cpu(ctrl->wValue);
- u16 w_length = le16_to_cpu(ctrl->wLength);
-
- if (!fsg->config)
- return value;
-
- /* Handle Bulk-only class-specific requests */
- if (transport_is_bbb()) {
- switch (ctrl->bRequest) {
-
- case US_BULK_RESET_REQUEST:
- if (ctrl->bRequestType != (USB_DIR_OUT |
- USB_TYPE_CLASS | USB_RECIP_INTERFACE))
- break;
- if (w_index != 0 || w_value != 0 || w_length != 0) {
- value = -EDOM;
- break;
- }
-
- /* Raise an exception to stop the current operation
- * and reinitialize our state. */
- DBG(fsg, "bulk reset request\n");
- raise_exception(fsg, FSG_STATE_RESET);
- value = DELAYED_STATUS;
- break;
-
- case US_BULK_GET_MAX_LUN:
- if (ctrl->bRequestType != (USB_DIR_IN |
- USB_TYPE_CLASS | USB_RECIP_INTERFACE))
- break;
- if (w_index != 0 || w_value != 0 || w_length != 1) {
- value = -EDOM;
- break;
- }
- VDBG(fsg, "get max LUN\n");
- *(u8 *) req->buf = fsg->nluns - 1;
- value = 1;
- break;
- }
- }
-
- /* Handle CBI class-specific requests */
- else {
- switch (ctrl->bRequest) {
-
- case USB_CBI_ADSC_REQUEST:
- if (ctrl->bRequestType != (USB_DIR_OUT |
- USB_TYPE_CLASS | USB_RECIP_INTERFACE))
- break;
- if (w_index != 0 || w_value != 0) {
- value = -EDOM;
- break;
- }
- if (w_length > MAX_COMMAND_SIZE) {
- value = -EOVERFLOW;
- break;
- }
- value = w_length;
- fsg->ep0req->context = received_cbi_adsc;
- break;
- }
- }
-
- if (value == -EOPNOTSUPP)
- VDBG(fsg,
- "unknown class-specific control req "
- "%02x.%02x v%04x i%04x l%u\n",
- ctrl->bRequestType, ctrl->bRequest,
- le16_to_cpu(ctrl->wValue), w_index, w_length);
- return value;
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-/* Ep0 standard request handlers. These always run in_irq. */
-
-static int standard_setup_req(struct fsg_dev *fsg,
- const struct usb_ctrlrequest *ctrl)
-{
- struct usb_request *req = fsg->ep0req;
- int value = -EOPNOTSUPP;
- u16 w_index = le16_to_cpu(ctrl->wIndex);
- u16 w_value = le16_to_cpu(ctrl->wValue);
-
- /* Usually this just stores reply data in the pre-allocated ep0 buffer,
- * but config change events will also reconfigure hardware. */
- switch (ctrl->bRequest) {
-
- case USB_REQ_GET_DESCRIPTOR:
- if (ctrl->bRequestType != (USB_DIR_IN | USB_TYPE_STANDARD |
- USB_RECIP_DEVICE))
- break;
- switch (w_value >> 8) {
-
- case USB_DT_DEVICE:
- VDBG(fsg, "get device descriptor\n");
- device_desc.bMaxPacketSize0 = fsg->ep0->maxpacket;
- value = sizeof device_desc;
- memcpy(req->buf, &device_desc, value);
- break;
- case USB_DT_DEVICE_QUALIFIER:
- VDBG(fsg, "get device qualifier\n");
- if (!gadget_is_dualspeed(fsg->gadget) ||
- fsg->gadget->speed == USB_SPEED_SUPER)
- break;
- /*
- * Assume ep0 uses the same maxpacket value for both
- * speeds
- */
- dev_qualifier.bMaxPacketSize0 = fsg->ep0->maxpacket;
- value = sizeof dev_qualifier;
- memcpy(req->buf, &dev_qualifier, value);
- break;
-
- case USB_DT_OTHER_SPEED_CONFIG:
- VDBG(fsg, "get other-speed config descriptor\n");
- if (!gadget_is_dualspeed(fsg->gadget) ||
- fsg->gadget->speed == USB_SPEED_SUPER)
- break;
- goto get_config;
- case USB_DT_CONFIG:
- VDBG(fsg, "get configuration descriptor\n");
-get_config:
- value = populate_config_buf(fsg->gadget,
- req->buf,
- w_value >> 8,
- w_value & 0xff);
- break;
-
- case USB_DT_STRING:
- VDBG(fsg, "get string descriptor\n");
-
- /* wIndex == language code */
- value = usb_gadget_get_string(&fsg_stringtab,
- w_value & 0xff, req->buf);
- break;
-
- case USB_DT_BOS:
- VDBG(fsg, "get bos descriptor\n");
-
- if (gadget_is_superspeed(fsg->gadget))
- value = populate_bos(fsg, req->buf);
- break;
- }
-
- break;
-
- /* One config, two speeds */
- case USB_REQ_SET_CONFIGURATION:
- if (ctrl->bRequestType != (USB_DIR_OUT | USB_TYPE_STANDARD |
- USB_RECIP_DEVICE))
- break;
- VDBG(fsg, "set configuration\n");
- if (w_value == CONFIG_VALUE || w_value == 0) {
- fsg->new_config = w_value;
-
- /* Raise an exception to wipe out previous transaction
- * state (queued bufs, etc) and set the new config. */
- raise_exception(fsg, FSG_STATE_CONFIG_CHANGE);
- value = DELAYED_STATUS;
- }
- break;
- case USB_REQ_GET_CONFIGURATION:
- if (ctrl->bRequestType != (USB_DIR_IN | USB_TYPE_STANDARD |
- USB_RECIP_DEVICE))
- break;
- VDBG(fsg, "get configuration\n");
- *(u8 *) req->buf = fsg->config;
- value = 1;
- break;
-
- case USB_REQ_SET_INTERFACE:
- if (ctrl->bRequestType != (USB_DIR_OUT| USB_TYPE_STANDARD |
- USB_RECIP_INTERFACE))
- break;
- if (fsg->config && w_index == 0) {
-
- /* Raise an exception to wipe out previous transaction
- * state (queued bufs, etc) and install the new
- * interface altsetting. */
- raise_exception(fsg, FSG_STATE_INTERFACE_CHANGE);
- value = DELAYED_STATUS;
- }
- break;
- case USB_REQ_GET_INTERFACE:
- if (ctrl->bRequestType != (USB_DIR_IN | USB_TYPE_STANDARD |
- USB_RECIP_INTERFACE))
- break;
- if (!fsg->config)
- break;
- if (w_index != 0) {
- value = -EDOM;
- break;
- }
- VDBG(fsg, "get interface\n");
- *(u8 *) req->buf = 0;
- value = 1;
- break;
-
- default:
- VDBG(fsg,
- "unknown control req %02x.%02x v%04x i%04x l%u\n",
- ctrl->bRequestType, ctrl->bRequest,
- w_value, w_index, le16_to_cpu(ctrl->wLength));
- }
-
- return value;
-}
-
-
-static int fsg_setup(struct usb_gadget *gadget,
- const struct usb_ctrlrequest *ctrl)
-{
- struct fsg_dev *fsg = get_gadget_data(gadget);
- int rc;
- int w_length = le16_to_cpu(ctrl->wLength);
-
- ++fsg->ep0_req_tag; // Record arrival of a new request
- fsg->ep0req->context = NULL;
- fsg->ep0req->length = 0;
- dump_msg(fsg, "ep0-setup", (u8 *) ctrl, sizeof(*ctrl));
-
- if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_CLASS)
- rc = class_setup_req(fsg, ctrl);
- else
- rc = standard_setup_req(fsg, ctrl);
-
- /* Respond with data/status or defer until later? */
- if (rc >= 0 && rc != DELAYED_STATUS) {
- rc = min(rc, w_length);
- fsg->ep0req->length = rc;
- fsg->ep0req->zero = rc < w_length;
- fsg->ep0req_name = (ctrl->bRequestType & USB_DIR_IN ?
- "ep0-in" : "ep0-out");
- rc = ep0_queue(fsg);
- }
-
- /* Device either stalls (rc < 0) or reports success */
- return rc;
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-/* All the following routines run in process context */
-
-
-/* Use this for bulk or interrupt transfers, not ep0 */
-static void start_transfer(struct fsg_dev *fsg, struct usb_ep *ep,
- struct usb_request *req, int *pbusy,
- enum fsg_buffer_state *state)
-{
- int rc;
-
- if (ep == fsg->bulk_in)
- dump_msg(fsg, "bulk-in", req->buf, req->length);
- else if (ep == fsg->intr_in)
- dump_msg(fsg, "intr-in", req->buf, req->length);
-
- spin_lock_irq(&fsg->lock);
- *pbusy = 1;
- *state = BUF_STATE_BUSY;
- spin_unlock_irq(&fsg->lock);
- rc = usb_ep_queue(ep, req, GFP_KERNEL);
- if (rc != 0) {
- *pbusy = 0;
- *state = BUF_STATE_EMPTY;
-
- /* We can't do much more than wait for a reset */
-
- /* Note: currently the net2280 driver fails zero-length
- * submissions if DMA is enabled. */
- if (rc != -ESHUTDOWN && !(rc == -EOPNOTSUPP &&
- req->length == 0))
- WARNING(fsg, "error in submission: %s --> %d\n",
- ep->name, rc);
- }
-}
-
-
-static int sleep_thread(struct fsg_dev *fsg)
-{
- int rc = 0;
-
- /* Wait until a signal arrives or we are woken up */
- for (;;) {
- try_to_freeze();
- set_current_state(TASK_INTERRUPTIBLE);
- if (signal_pending(current)) {
- rc = -EINTR;
- break;
- }
- if (fsg->thread_wakeup_needed)
- break;
- schedule();
- }
- __set_current_state(TASK_RUNNING);
- fsg->thread_wakeup_needed = 0;
- return rc;
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-static int do_read(struct fsg_dev *fsg)
-{
- struct fsg_lun *curlun = fsg->curlun;
- u32 lba;
- struct fsg_buffhd *bh;
- int rc;
- u32 amount_left;
- loff_t file_offset, file_offset_tmp;
- unsigned int amount;
- ssize_t nread;
-
- /* Get the starting Logical Block Address and check that it's
- * not too big */
- if (fsg->cmnd[0] == READ_6)
- lba = get_unaligned_be24(&fsg->cmnd[1]);
- else {
- lba = get_unaligned_be32(&fsg->cmnd[2]);
-
- /* We allow DPO (Disable Page Out = don't save data in the
- * cache) and FUA (Force Unit Access = don't read from the
- * cache), but we don't implement them. */
- if ((fsg->cmnd[1] & ~0x18) != 0) {
- curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
- return -EINVAL;
- }
- }
- if (lba >= curlun->num_sectors) {
- curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
- return -EINVAL;
- }
- file_offset = ((loff_t) lba) << curlun->blkbits;
-
- /* Carry out the file reads */
- amount_left = fsg->data_size_from_cmnd;
- if (unlikely(amount_left == 0))
- return -EIO; // No default reply
-
- for (;;) {
-
- /* Figure out how much we need to read:
- * Try to read the remaining amount.
- * But don't read more than the buffer size.
- * And don't try to read past the end of the file.
- */
- amount = min((unsigned int) amount_left, mod_data.buflen);
- amount = min((loff_t) amount,
- curlun->file_length - file_offset);
-
- /* Wait for the next buffer to become available */
- bh = fsg->next_buffhd_to_fill;
- while (bh->state != BUF_STATE_EMPTY) {
- rc = sleep_thread(fsg);
- if (rc)
- return rc;
- }
-
- /* If we were asked to read past the end of file,
- * end with an empty buffer. */
- if (amount == 0) {
- curlun->sense_data =
- SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
- curlun->sense_data_info = file_offset >> curlun->blkbits;
- curlun->info_valid = 1;
- bh->inreq->length = 0;
- bh->state = BUF_STATE_FULL;
- break;
- }
-
- /* Perform the read */
- file_offset_tmp = file_offset;
- nread = vfs_read(curlun->filp,
- (char __user *) bh->buf,
- amount, &file_offset_tmp);
- VLDBG(curlun, "file read %u @ %llu -> %d\n", amount,
- (unsigned long long) file_offset,
- (int) nread);
- if (signal_pending(current))
- return -EINTR;
-
- if (nread < 0) {
- LDBG(curlun, "error in file read: %d\n",
- (int) nread);
- nread = 0;
- } else if (nread < amount) {
- LDBG(curlun, "partial file read: %d/%u\n",
- (int) nread, amount);
- nread = round_down(nread, curlun->blksize);
- }
- file_offset += nread;
- amount_left -= nread;
- fsg->residue -= nread;
-
- /* Except at the end of the transfer, nread will be
- * equal to the buffer size, which is divisible by the
- * bulk-in maxpacket size.
- */
- bh->inreq->length = nread;
- bh->state = BUF_STATE_FULL;
-
- /* If an error occurred, report it and its position */
- if (nread < amount) {
- curlun->sense_data = SS_UNRECOVERED_READ_ERROR;
- curlun->sense_data_info = file_offset >> curlun->blkbits;
- curlun->info_valid = 1;
- break;
- }
-
- if (amount_left == 0)
- break; // No more left to read
-
- /* Send this buffer and go read some more */
- bh->inreq->zero = 0;
- start_transfer(fsg, fsg->bulk_in, bh->inreq,
- &bh->inreq_busy, &bh->state);
- fsg->next_buffhd_to_fill = bh->next;
- }
-
- return -EIO; // No default reply
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-static int do_write(struct fsg_dev *fsg)
-{
- struct fsg_lun *curlun = fsg->curlun;
- u32 lba;
- struct fsg_buffhd *bh;
- int get_some_more;
- u32 amount_left_to_req, amount_left_to_write;
- loff_t usb_offset, file_offset, file_offset_tmp;
- unsigned int amount;
- ssize_t nwritten;
- int rc;
-
- if (curlun->ro) {
- curlun->sense_data = SS_WRITE_PROTECTED;
- return -EINVAL;
- }
- spin_lock(&curlun->filp->f_lock);
- curlun->filp->f_flags &= ~O_SYNC; // Default is not to wait
- spin_unlock(&curlun->filp->f_lock);
-
- /* Get the starting Logical Block Address and check that it's
- * not too big */
- if (fsg->cmnd[0] == WRITE_6)
- lba = get_unaligned_be24(&fsg->cmnd[1]);
- else {
- lba = get_unaligned_be32(&fsg->cmnd[2]);
-
- /* We allow DPO (Disable Page Out = don't save data in the
- * cache) and FUA (Force Unit Access = write directly to the
- * medium). We don't implement DPO; we implement FUA by
- * performing synchronous output. */
- if ((fsg->cmnd[1] & ~0x18) != 0) {
- curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
- return -EINVAL;
- }
- /* FUA */
- if (!curlun->nofua && (fsg->cmnd[1] & 0x08)) {
- spin_lock(&curlun->filp->f_lock);
- curlun->filp->f_flags |= O_DSYNC;
- spin_unlock(&curlun->filp->f_lock);
- }
- }
- if (lba >= curlun->num_sectors) {
- curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
- return -EINVAL;
- }
-
- /* Carry out the file writes */
- get_some_more = 1;
- file_offset = usb_offset = ((loff_t) lba) << curlun->blkbits;
- amount_left_to_req = amount_left_to_write = fsg->data_size_from_cmnd;
-
- while (amount_left_to_write > 0) {
-
- /* Queue a request for more data from the host */
- bh = fsg->next_buffhd_to_fill;
- if (bh->state == BUF_STATE_EMPTY && get_some_more) {
-
- /* Figure out how much we want to get:
- * Try to get the remaining amount,
- * but not more than the buffer size.
- */
- amount = min(amount_left_to_req, mod_data.buflen);
-
- /* Beyond the end of the backing file? */
- if (usb_offset >= curlun->file_length) {
- get_some_more = 0;
- curlun->sense_data =
- SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
- curlun->sense_data_info = usb_offset >> curlun->blkbits;
- curlun->info_valid = 1;
- continue;
- }
-
- /* Get the next buffer */
- usb_offset += amount;
- fsg->usb_amount_left -= amount;
- amount_left_to_req -= amount;
- if (amount_left_to_req == 0)
- get_some_more = 0;
-
- /* Except at the end of the transfer, amount will be
- * equal to the buffer size, which is divisible by
- * the bulk-out maxpacket size.
- */
- set_bulk_out_req_length(fsg, bh, amount);
- start_transfer(fsg, fsg->bulk_out, bh->outreq,
- &bh->outreq_busy, &bh->state);
- fsg->next_buffhd_to_fill = bh->next;
- continue;
- }
-
- /* Write the received data to the backing file */
- bh = fsg->next_buffhd_to_drain;
- if (bh->state == BUF_STATE_EMPTY && !get_some_more)
- break; // We stopped early
- if (bh->state == BUF_STATE_FULL) {
- smp_rmb();
- fsg->next_buffhd_to_drain = bh->next;
- bh->state = BUF_STATE_EMPTY;
-
- /* Did something go wrong with the transfer? */
- if (bh->outreq->status != 0) {
- curlun->sense_data = SS_COMMUNICATION_FAILURE;
- curlun->sense_data_info = file_offset >> curlun->blkbits;
- curlun->info_valid = 1;
- break;
- }
-
- amount = bh->outreq->actual;
- if (curlun->file_length - file_offset < amount) {
- LERROR(curlun,
- "write %u @ %llu beyond end %llu\n",
- amount, (unsigned long long) file_offset,
- (unsigned long long) curlun->file_length);
- amount = curlun->file_length - file_offset;
- }
-
- /* Don't accept excess data. The spec doesn't say
- * what to do in this case. We'll ignore the error.
- */
- amount = min(amount, bh->bulk_out_intended_length);
-
- /* Don't write a partial block */
- amount = round_down(amount, curlun->blksize);
- if (amount == 0)
- goto empty_write;
-
- /* Perform the write */
- file_offset_tmp = file_offset;
- nwritten = vfs_write(curlun->filp,
- (char __user *) bh->buf,
- amount, &file_offset_tmp);
- VLDBG(curlun, "file write %u @ %llu -> %d\n", amount,
- (unsigned long long) file_offset,
- (int) nwritten);
- if (signal_pending(current))
- return -EINTR; // Interrupted!
-
- if (nwritten < 0) {
- LDBG(curlun, "error in file write: %d\n",
- (int) nwritten);
- nwritten = 0;
- } else if (nwritten < amount) {
- LDBG(curlun, "partial file write: %d/%u\n",
- (int) nwritten, amount);
- nwritten = round_down(nwritten, curlun->blksize);
- }
- file_offset += nwritten;
- amount_left_to_write -= nwritten;
- fsg->residue -= nwritten;
-
- /* If an error occurred, report it and its position */
- if (nwritten < amount) {
- curlun->sense_data = SS_WRITE_ERROR;
- curlun->sense_data_info = file_offset >> curlun->blkbits;
- curlun->info_valid = 1;
- break;
- }
-
- empty_write:
- /* Did the host decide to stop early? */
- if (bh->outreq->actual < bh->bulk_out_intended_length) {
- fsg->short_packet_received = 1;
- break;
- }
- continue;
- }
-
- /* Wait for something to happen */
- rc = sleep_thread(fsg);
- if (rc)
- return rc;
- }
-
- return -EIO; // No default reply
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-static int do_synchronize_cache(struct fsg_dev *fsg)
-{
- struct fsg_lun *curlun = fsg->curlun;
- int rc;
-
- /* We ignore the requested LBA and write out all file's
- * dirty data buffers. */
- rc = fsg_lun_fsync_sub(curlun);
- if (rc)
- curlun->sense_data = SS_WRITE_ERROR;
- return 0;
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-static void invalidate_sub(struct fsg_lun *curlun)
-{
- struct file *filp = curlun->filp;
- struct inode *inode = filp->f_path.dentry->d_inode;
- unsigned long rc;
-
- rc = invalidate_mapping_pages(inode->i_mapping, 0, -1);
- VLDBG(curlun, "invalidate_mapping_pages -> %ld\n", rc);
-}
-
-static int do_verify(struct fsg_dev *fsg)
-{
- struct fsg_lun *curlun = fsg->curlun;
- u32 lba;
- u32 verification_length;
- struct fsg_buffhd *bh = fsg->next_buffhd_to_fill;
- loff_t file_offset, file_offset_tmp;
- u32 amount_left;
- unsigned int amount;
- ssize_t nread;
-
- /* Get the starting Logical Block Address and check that it's
- * not too big */
- lba = get_unaligned_be32(&fsg->cmnd[2]);
- if (lba >= curlun->num_sectors) {
- curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
- return -EINVAL;
- }
-
- /* We allow DPO (Disable Page Out = don't save data in the
- * cache) but we don't implement it. */
- if ((fsg->cmnd[1] & ~0x10) != 0) {
- curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
- return -EINVAL;
- }
-
- verification_length = get_unaligned_be16(&fsg->cmnd[7]);
- if (unlikely(verification_length == 0))
- return -EIO; // No default reply
-
- /* Prepare to carry out the file verify */
- amount_left = verification_length << curlun->blkbits;
- file_offset = ((loff_t) lba) << curlun->blkbits;
-
- /* Write out all the dirty buffers before invalidating them */
- fsg_lun_fsync_sub(curlun);
- if (signal_pending(current))
- return -EINTR;
-
- invalidate_sub(curlun);
- if (signal_pending(current))
- return -EINTR;
-
- /* Just try to read the requested blocks */
- while (amount_left > 0) {
-
- /* Figure out how much we need to read:
- * Try to read the remaining amount, but not more than
- * the buffer size.
- * And don't try to read past the end of the file.
- */
- amount = min((unsigned int) amount_left, mod_data.buflen);
- amount = min((loff_t) amount,
- curlun->file_length - file_offset);
- if (amount == 0) {
- curlun->sense_data =
- SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
- curlun->sense_data_info = file_offset >> curlun->blkbits;
- curlun->info_valid = 1;
- break;
- }
-
- /* Perform the read */
- file_offset_tmp = file_offset;
- nread = vfs_read(curlun->filp,
- (char __user *) bh->buf,
- amount, &file_offset_tmp);
- VLDBG(curlun, "file read %u @ %llu -> %d\n", amount,
- (unsigned long long) file_offset,
- (int) nread);
- if (signal_pending(current))
- return -EINTR;
-
- if (nread < 0) {
- LDBG(curlun, "error in file verify: %d\n",
- (int) nread);
- nread = 0;
- } else if (nread < amount) {
- LDBG(curlun, "partial file verify: %d/%u\n",
- (int) nread, amount);
- nread = round_down(nread, curlun->blksize);
- }
- if (nread == 0) {
- curlun->sense_data = SS_UNRECOVERED_READ_ERROR;
- curlun->sense_data_info = file_offset >> curlun->blkbits;
- curlun->info_valid = 1;
- break;
- }
- file_offset += nread;
- amount_left -= nread;
- }
- return 0;
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-static int do_inquiry(struct fsg_dev *fsg, struct fsg_buffhd *bh)
-{
- u8 *buf = (u8 *) bh->buf;
-
- static char vendor_id[] = "Linux ";
- static char product_disk_id[] = "File-Stor Gadget";
- static char product_cdrom_id[] = "File-CD Gadget ";
-
- if (!fsg->curlun) { // Unsupported LUNs are okay
- fsg->bad_lun_okay = 1;
- memset(buf, 0, 36);
- buf[0] = 0x7f; // Unsupported, no device-type
- buf[4] = 31; // Additional length
- return 36;
- }
-
- memset(buf, 0, 8);
- buf[0] = (mod_data.cdrom ? TYPE_ROM : TYPE_DISK);
- if (mod_data.removable)
- buf[1] = 0x80;
- buf[2] = 2; // ANSI SCSI level 2
- buf[3] = 2; // SCSI-2 INQUIRY data format
- buf[4] = 31; // Additional length
- // No special options
- sprintf(buf + 8, "%-8s%-16s%04x", vendor_id,
- (mod_data.cdrom ? product_cdrom_id :
- product_disk_id),
- mod_data.release);
- return 36;
-}
-
-
-static int do_request_sense(struct fsg_dev *fsg, struct fsg_buffhd *bh)
-{
- struct fsg_lun *curlun = fsg->curlun;
- u8 *buf = (u8 *) bh->buf;
- u32 sd, sdinfo;
- int valid;
-
- /*
- * From the SCSI-2 spec., section 7.9 (Unit attention condition):
- *
- * If a REQUEST SENSE command is received from an initiator
- * with a pending unit attention condition (before the target
- * generates the contingent allegiance condition), then the
- * target shall either:
- * a) report any pending sense data and preserve the unit
- * attention condition on the logical unit, or,
- * b) report the unit attention condition, may discard any
- * pending sense data, and clear the unit attention
- * condition on the logical unit for that initiator.
- *
- * FSG normally uses option a); enable this code to use option b).
- */
-#if 0
- if (curlun && curlun->unit_attention_data != SS_NO_SENSE) {
- curlun->sense_data = curlun->unit_attention_data;
- curlun->unit_attention_data = SS_NO_SENSE;
- }
-#endif
-
- if (!curlun) { // Unsupported LUNs are okay
- fsg->bad_lun_okay = 1;
- sd = SS_LOGICAL_UNIT_NOT_SUPPORTED;
- sdinfo = 0;
- valid = 0;
- } else {
- sd = curlun->sense_data;
- sdinfo = curlun->sense_data_info;
- valid = curlun->info_valid << 7;
- curlun->sense_data = SS_NO_SENSE;
- curlun->sense_data_info = 0;
- curlun->info_valid = 0;
- }
-
- memset(buf, 0, 18);
- buf[0] = valid | 0x70; // Valid, current error
- buf[2] = SK(sd);
- put_unaligned_be32(sdinfo, &buf[3]); /* Sense information */
- buf[7] = 18 - 8; // Additional sense length
- buf[12] = ASC(sd);
- buf[13] = ASCQ(sd);
- return 18;
-}
-
-
-static int do_read_capacity(struct fsg_dev *fsg, struct fsg_buffhd *bh)
-{
- struct fsg_lun *curlun = fsg->curlun;
- u32 lba = get_unaligned_be32(&fsg->cmnd[2]);
- int pmi = fsg->cmnd[8];
- u8 *buf = (u8 *) bh->buf;
-
- /* Check the PMI and LBA fields */
- if (pmi > 1 || (pmi == 0 && lba != 0)) {
- curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
- return -EINVAL;
- }
-
- put_unaligned_be32(curlun->num_sectors - 1, &buf[0]);
- /* Max logical block */
- put_unaligned_be32(curlun->blksize, &buf[4]); /* Block length */
- return 8;
-}
-
-
-static int do_read_header(struct fsg_dev *fsg, struct fsg_buffhd *bh)
-{
- struct fsg_lun *curlun = fsg->curlun;
- int msf = fsg->cmnd[1] & 0x02;
- u32 lba = get_unaligned_be32(&fsg->cmnd[2]);
- u8 *buf = (u8 *) bh->buf;
-
- if ((fsg->cmnd[1] & ~0x02) != 0) { /* Mask away MSF */
- curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
- return -EINVAL;
- }
- if (lba >= curlun->num_sectors) {
- curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
- return -EINVAL;
- }
-
- memset(buf, 0, 8);
- buf[0] = 0x01; /* 2048 bytes of user data, rest is EC */
- store_cdrom_address(&buf[4], msf, lba);
- return 8;
-}
-
-
-static int do_read_toc(struct fsg_dev *fsg, struct fsg_buffhd *bh)
-{
- struct fsg_lun *curlun = fsg->curlun;
- int msf = fsg->cmnd[1] & 0x02;
- int start_track = fsg->cmnd[6];
- u8 *buf = (u8 *) bh->buf;
-
- if ((fsg->cmnd[1] & ~0x02) != 0 || /* Mask away MSF */
- start_track > 1) {
- curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
- return -EINVAL;
- }
-
- memset(buf, 0, 20);
- buf[1] = (20-2); /* TOC data length */
- buf[2] = 1; /* First track number */
- buf[3] = 1; /* Last track number */
- buf[5] = 0x16; /* Data track, copying allowed */
- buf[6] = 0x01; /* Only track is number 1 */
- store_cdrom_address(&buf[8], msf, 0);
-
- buf[13] = 0x16; /* Lead-out track is data */
- buf[14] = 0xAA; /* Lead-out track number */
- store_cdrom_address(&buf[16], msf, curlun->num_sectors);
- return 20;
-}
-
-
-static int do_mode_sense(struct fsg_dev *fsg, struct fsg_buffhd *bh)
-{
- struct fsg_lun *curlun = fsg->curlun;
- int mscmnd = fsg->cmnd[0];
- u8 *buf = (u8 *) bh->buf;
- u8 *buf0 = buf;
- int pc, page_code;
- int changeable_values, all_pages;
- int valid_page = 0;
- int len, limit;
-
- if ((fsg->cmnd[1] & ~0x08) != 0) { // Mask away DBD
- curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
- return -EINVAL;
- }
- pc = fsg->cmnd[2] >> 6;
- page_code = fsg->cmnd[2] & 0x3f;
- if (pc == 3) {
- curlun->sense_data = SS_SAVING_PARAMETERS_NOT_SUPPORTED;
- return -EINVAL;
- }
- changeable_values = (pc == 1);
- all_pages = (page_code == 0x3f);
-
- /* Write the mode parameter header. Fixed values are: default
- * medium type, no cache control (DPOFUA), and no block descriptors.
- * The only variable value is the WriteProtect bit. We will fill in
- * the mode data length later. */
- memset(buf, 0, 8);
- if (mscmnd == MODE_SENSE) {
- buf[2] = (curlun->ro ? 0x80 : 0x00); // WP, DPOFUA
- buf += 4;
- limit = 255;
- } else { // MODE_SENSE_10
- buf[3] = (curlun->ro ? 0x80 : 0x00); // WP, DPOFUA
- buf += 8;
- limit = 65535; // Should really be mod_data.buflen
- }
-
- /* No block descriptors */
-
- /* The mode pages, in numerical order. The only page we support
- * is the Caching page. */
- if (page_code == 0x08 || all_pages) {
- valid_page = 1;
- buf[0] = 0x08; // Page code
- buf[1] = 10; // Page length
- memset(buf+2, 0, 10); // None of the fields are changeable
-
- if (!changeable_values) {
- buf[2] = 0x04; // Write cache enable,
- // Read cache not disabled
- // No cache retention priorities
- put_unaligned_be16(0xffff, &buf[4]);
- /* Don't disable prefetch */
- /* Minimum prefetch = 0 */
- put_unaligned_be16(0xffff, &buf[8]);
- /* Maximum prefetch */
- put_unaligned_be16(0xffff, &buf[10]);
- /* Maximum prefetch ceiling */
- }
- buf += 12;
- }
-
- /* Check that a valid page was requested and the mode data length
- * isn't too long. */
- len = buf - buf0;
- if (!valid_page || len > limit) {
- curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
- return -EINVAL;
- }
-
- /* Store the mode data length */
- if (mscmnd == MODE_SENSE)
- buf0[0] = len - 1;
- else
- put_unaligned_be16(len - 2, buf0);
- return len;
-}
-
-
-static int do_start_stop(struct fsg_dev *fsg)
-{
- struct fsg_lun *curlun = fsg->curlun;
- int loej, start;
-
- if (!mod_data.removable) {
- curlun->sense_data = SS_INVALID_COMMAND;
- return -EINVAL;
- }
-
- // int immed = fsg->cmnd[1] & 0x01;
- loej = fsg->cmnd[4] & 0x02;
- start = fsg->cmnd[4] & 0x01;
-
-#ifdef CONFIG_USB_FILE_STORAGE_TEST
- if ((fsg->cmnd[1] & ~0x01) != 0 || // Mask away Immed
- (fsg->cmnd[4] & ~0x03) != 0) { // Mask LoEj, Start
- curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
- return -EINVAL;
- }
-
- if (!start) {
-
- /* Are we allowed to unload the media? */
- if (curlun->prevent_medium_removal) {
- LDBG(curlun, "unload attempt prevented\n");
- curlun->sense_data = SS_MEDIUM_REMOVAL_PREVENTED;
- return -EINVAL;
- }
- if (loej) { // Simulate an unload/eject
- up_read(&fsg->filesem);
- down_write(&fsg->filesem);
- fsg_lun_close(curlun);
- up_write(&fsg->filesem);
- down_read(&fsg->filesem);
- }
- } else {
-
- /* Our emulation doesn't support mounting; the medium is
- * available for use as soon as it is loaded. */
- if (!fsg_lun_is_open(curlun)) {
- curlun->sense_data = SS_MEDIUM_NOT_PRESENT;
- return -EINVAL;
- }
- }
-#endif
- return 0;
-}
-
-
-static int do_prevent_allow(struct fsg_dev *fsg)
-{
- struct fsg_lun *curlun = fsg->curlun;
- int prevent;
-
- if (!mod_data.removable) {
- curlun->sense_data = SS_INVALID_COMMAND;
- return -EINVAL;
- }
-
- prevent = fsg->cmnd[4] & 0x01;
- if ((fsg->cmnd[4] & ~0x01) != 0) { // Mask away Prevent
- curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
- return -EINVAL;
- }
-
- if (curlun->prevent_medium_removal && !prevent)
- fsg_lun_fsync_sub(curlun);
- curlun->prevent_medium_removal = prevent;
- return 0;
-}
-
-
-static int do_read_format_capacities(struct fsg_dev *fsg,
- struct fsg_buffhd *bh)
-{
- struct fsg_lun *curlun = fsg->curlun;
- u8 *buf = (u8 *) bh->buf;
-
- buf[0] = buf[1] = buf[2] = 0;
- buf[3] = 8; // Only the Current/Maximum Capacity Descriptor
- buf += 4;
-
- put_unaligned_be32(curlun->num_sectors, &buf[0]);
- /* Number of blocks */
- put_unaligned_be32(curlun->blksize, &buf[4]); /* Block length */
- buf[4] = 0x02; /* Current capacity */
- return 12;
-}
-
-
-static int do_mode_select(struct fsg_dev *fsg, struct fsg_buffhd *bh)
-{
- struct fsg_lun *curlun = fsg->curlun;
-
- /* We don't support MODE SELECT */
- curlun->sense_data = SS_INVALID_COMMAND;
- return -EINVAL;
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-static int halt_bulk_in_endpoint(struct fsg_dev *fsg)
-{
- int rc;
-
- rc = fsg_set_halt(fsg, fsg->bulk_in);
- if (rc == -EAGAIN)
- VDBG(fsg, "delayed bulk-in endpoint halt\n");
- while (rc != 0) {
- if (rc != -EAGAIN) {
- WARNING(fsg, "usb_ep_set_halt -> %d\n", rc);
- rc = 0;
- break;
- }
-
- /* Wait for a short time and then try again */
- if (msleep_interruptible(100) != 0)
- return -EINTR;
- rc = usb_ep_set_halt(fsg->bulk_in);
- }
- return rc;
-}
-
-static int wedge_bulk_in_endpoint(struct fsg_dev *fsg)
-{
- int rc;
-
- DBG(fsg, "bulk-in set wedge\n");
- rc = usb_ep_set_wedge(fsg->bulk_in);
- if (rc == -EAGAIN)
- VDBG(fsg, "delayed bulk-in endpoint wedge\n");
- while (rc != 0) {
- if (rc != -EAGAIN) {
- WARNING(fsg, "usb_ep_set_wedge -> %d\n", rc);
- rc = 0;
- break;
- }
-
- /* Wait for a short time and then try again */
- if (msleep_interruptible(100) != 0)
- return -EINTR;
- rc = usb_ep_set_wedge(fsg->bulk_in);
- }
- return rc;
-}
-
-static int throw_away_data(struct fsg_dev *fsg)
-{
- struct fsg_buffhd *bh;
- u32 amount;
- int rc;
-
- while ((bh = fsg->next_buffhd_to_drain)->state != BUF_STATE_EMPTY ||
- fsg->usb_amount_left > 0) {
-
- /* Throw away the data in a filled buffer */
- if (bh->state == BUF_STATE_FULL) {
- smp_rmb();
- bh->state = BUF_STATE_EMPTY;
- fsg->next_buffhd_to_drain = bh->next;
-
- /* A short packet or an error ends everything */
- if (bh->outreq->actual < bh->bulk_out_intended_length ||
- bh->outreq->status != 0) {
- raise_exception(fsg, FSG_STATE_ABORT_BULK_OUT);
- return -EINTR;
- }
- continue;
- }
-
- /* Try to submit another request if we need one */
- bh = fsg->next_buffhd_to_fill;
- if (bh->state == BUF_STATE_EMPTY && fsg->usb_amount_left > 0) {
- amount = min(fsg->usb_amount_left,
- (u32) mod_data.buflen);
-
- /* Except at the end of the transfer, amount will be
- * equal to the buffer size, which is divisible by
- * the bulk-out maxpacket size.
- */
- set_bulk_out_req_length(fsg, bh, amount);
- start_transfer(fsg, fsg->bulk_out, bh->outreq,
- &bh->outreq_busy, &bh->state);
- fsg->next_buffhd_to_fill = bh->next;
- fsg->usb_amount_left -= amount;
- continue;
- }
-
- /* Otherwise wait for something to happen */
- rc = sleep_thread(fsg);
- if (rc)
- return rc;
- }
- return 0;
-}
-
-
-static int finish_reply(struct fsg_dev *fsg)
-{
- struct fsg_buffhd *bh = fsg->next_buffhd_to_fill;
- int rc = 0;
-
- switch (fsg->data_dir) {
- case DATA_DIR_NONE:
- break; // Nothing to send
-
- /* If we don't know whether the host wants to read or write,
- * this must be CB or CBI with an unknown command. We mustn't
- * try to send or receive any data. So stall both bulk pipes
- * if we can and wait for a reset. */
- case DATA_DIR_UNKNOWN:
- if (mod_data.can_stall) {
- fsg_set_halt(fsg, fsg->bulk_out);
- rc = halt_bulk_in_endpoint(fsg);
- }
- break;
-
- /* All but the last buffer of data must have already been sent */
- case DATA_DIR_TO_HOST:
- if (fsg->data_size == 0)
- ; // Nothing to send
-
- /* If there's no residue, simply send the last buffer */
- else if (fsg->residue == 0) {
- bh->inreq->zero = 0;
- start_transfer(fsg, fsg->bulk_in, bh->inreq,
- &bh->inreq_busy, &bh->state);
- fsg->next_buffhd_to_fill = bh->next;
- }
-
- /* There is a residue. For CB and CBI, simply mark the end
- * of the data with a short packet. However, if we are
- * allowed to stall, there was no data at all (residue ==
- * data_size), and the command failed (invalid LUN or
- * sense data is set), then halt the bulk-in endpoint
- * instead. */
- else if (!transport_is_bbb()) {
- if (mod_data.can_stall &&
- fsg->residue == fsg->data_size &&
- (!fsg->curlun || fsg->curlun->sense_data != SS_NO_SENSE)) {
- bh->state = BUF_STATE_EMPTY;
- rc = halt_bulk_in_endpoint(fsg);
- } else {
- bh->inreq->zero = 1;
- start_transfer(fsg, fsg->bulk_in, bh->inreq,
- &bh->inreq_busy, &bh->state);
- fsg->next_buffhd_to_fill = bh->next;
- }
- }
-
- /*
- * For Bulk-only, mark the end of the data with a short
- * packet. If we are allowed to stall, halt the bulk-in
- * endpoint. (Note: This violates the Bulk-Only Transport
- * specification, which requires us to pad the data if we
- * don't halt the endpoint. Presumably nobody will mind.)
- */
- else {
- bh->inreq->zero = 1;
- start_transfer(fsg, fsg->bulk_in, bh->inreq,
- &bh->inreq_busy, &bh->state);
- fsg->next_buffhd_to_fill = bh->next;
- if (mod_data.can_stall)
- rc = halt_bulk_in_endpoint(fsg);
- }
- break;
-
- /* We have processed all we want from the data the host has sent.
- * There may still be outstanding bulk-out requests. */
- case DATA_DIR_FROM_HOST:
- if (fsg->residue == 0)
- ; // Nothing to receive
-
- /* Did the host stop sending unexpectedly early? */
- else if (fsg->short_packet_received) {
- raise_exception(fsg, FSG_STATE_ABORT_BULK_OUT);
- rc = -EINTR;
- }
-
- /* We haven't processed all the incoming data. Even though
- * we may be allowed to stall, doing so would cause a race.
- * The controller may already have ACK'ed all the remaining
- * bulk-out packets, in which case the host wouldn't see a
- * STALL. Not realizing the endpoint was halted, it wouldn't
- * clear the halt -- leading to problems later on. */
-#if 0
- else if (mod_data.can_stall) {
- fsg_set_halt(fsg, fsg->bulk_out);
- raise_exception(fsg, FSG_STATE_ABORT_BULK_OUT);
- rc = -EINTR;
- }
-#endif
-
- /* We can't stall. Read in the excess data and throw it
- * all away. */
- else
- rc = throw_away_data(fsg);
- break;
- }
- return rc;
-}
-
-
-static int send_status(struct fsg_dev *fsg)
-{
- struct fsg_lun *curlun = fsg->curlun;
- struct fsg_buffhd *bh;
- int rc;
- u8 status = US_BULK_STAT_OK;
- u32 sd, sdinfo = 0;
-
- /* Wait for the next buffer to become available */
- bh = fsg->next_buffhd_to_fill;
- while (bh->state != BUF_STATE_EMPTY) {
- rc = sleep_thread(fsg);
- if (rc)
- return rc;
- }
-
- if (curlun) {
- sd = curlun->sense_data;
- sdinfo = curlun->sense_data_info;
- } else if (fsg->bad_lun_okay)
- sd = SS_NO_SENSE;
- else
- sd = SS_LOGICAL_UNIT_NOT_SUPPORTED;
-
- if (fsg->phase_error) {
- DBG(fsg, "sending phase-error status\n");
- status = US_BULK_STAT_PHASE;
- sd = SS_INVALID_COMMAND;
- } else if (sd != SS_NO_SENSE) {
- DBG(fsg, "sending command-failure status\n");
- status = US_BULK_STAT_FAIL;
- VDBG(fsg, " sense data: SK x%02x, ASC x%02x, ASCQ x%02x;"
- " info x%x\n",
- SK(sd), ASC(sd), ASCQ(sd), sdinfo);
- }
-
- if (transport_is_bbb()) {
- struct bulk_cs_wrap *csw = bh->buf;
-
- /* Store and send the Bulk-only CSW */
- csw->Signature = cpu_to_le32(US_BULK_CS_SIGN);
- csw->Tag = fsg->tag;
- csw->Residue = cpu_to_le32(fsg->residue);
- csw->Status = status;
-
- bh->inreq->length = US_BULK_CS_WRAP_LEN;
- bh->inreq->zero = 0;
- start_transfer(fsg, fsg->bulk_in, bh->inreq,
- &bh->inreq_busy, &bh->state);
-
- } else if (mod_data.transport_type == USB_PR_CB) {
-
- /* Control-Bulk transport has no status phase! */
- return 0;
-
- } else { // USB_PR_CBI
- struct interrupt_data *buf = bh->buf;
-
- /* Store and send the Interrupt data. UFI sends the ASC
- * and ASCQ bytes. Everything else sends a Type (which
- * is always 0) and the status Value. */
- if (mod_data.protocol_type == USB_SC_UFI) {
- buf->bType = ASC(sd);
- buf->bValue = ASCQ(sd);
- } else {
- buf->bType = 0;
- buf->bValue = status;
- }
- fsg->intreq->length = CBI_INTERRUPT_DATA_LEN;
-
- fsg->intr_buffhd = bh; // Point to the right buffhd
- fsg->intreq->buf = bh->inreq->buf;
- fsg->intreq->context = bh;
- start_transfer(fsg, fsg->intr_in, fsg->intreq,
- &fsg->intreq_busy, &bh->state);
- }
-
- fsg->next_buffhd_to_fill = bh->next;
- return 0;
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-/* Check whether the command is properly formed and whether its data size
- * and direction agree with the values we already have. */
-static int check_command(struct fsg_dev *fsg, int cmnd_size,
- enum data_direction data_dir, unsigned int mask,
- int needs_medium, const char *name)
-{
- int i;
- int lun = fsg->cmnd[1] >> 5;
- static const char dirletter[4] = {'u', 'o', 'i', 'n'};
- char hdlen[20];
- struct fsg_lun *curlun;
-
- /* Adjust the expected cmnd_size for protocol encapsulation padding.
- * Transparent SCSI doesn't pad. */
- if (protocol_is_scsi())
- ;
-
- /* There's some disagreement as to whether RBC pads commands or not.
- * We'll play it safe and accept either form. */
- else if (mod_data.protocol_type == USB_SC_RBC) {
- if (fsg->cmnd_size == 12)
- cmnd_size = 12;
-
- /* All the other protocols pad to 12 bytes */
- } else
- cmnd_size = 12;
-
- hdlen[0] = 0;
- if (fsg->data_dir != DATA_DIR_UNKNOWN)
- sprintf(hdlen, ", H%c=%u", dirletter[(int) fsg->data_dir],
- fsg->data_size);
- VDBG(fsg, "SCSI command: %s; Dc=%d, D%c=%u; Hc=%d%s\n",
- name, cmnd_size, dirletter[(int) data_dir],
- fsg->data_size_from_cmnd, fsg->cmnd_size, hdlen);
-
- /* We can't reply at all until we know the correct data direction
- * and size. */
- if (fsg->data_size_from_cmnd == 0)
- data_dir = DATA_DIR_NONE;
- if (fsg->data_dir == DATA_DIR_UNKNOWN) { // CB or CBI
- fsg->data_dir = data_dir;
- fsg->data_size = fsg->data_size_from_cmnd;
-
- } else { // Bulk-only
- if (fsg->data_size < fsg->data_size_from_cmnd) {
-
- /* Host data size < Device data size is a phase error.
- * Carry out the command, but only transfer as much
- * as we are allowed. */
- fsg->data_size_from_cmnd = fsg->data_size;
- fsg->phase_error = 1;
- }
- }
- fsg->residue = fsg->usb_amount_left = fsg->data_size;
-
- /* Conflicting data directions is a phase error */
- if (fsg->data_dir != data_dir && fsg->data_size_from_cmnd > 0) {
- fsg->phase_error = 1;
- return -EINVAL;
- }
-
- /* Verify the length of the command itself */
- if (cmnd_size != fsg->cmnd_size) {
-
- /* Special case workaround: There are plenty of buggy SCSI
- * implementations. Many have issues with cbw->Length
- * field passing a wrong command size. For those cases we
- * always try to work around the problem by using the length
- * sent by the host side provided it is at least as large
- * as the correct command length.
- * Examples of such cases would be MS-Windows, which issues
- * REQUEST SENSE with cbw->Length == 12 where it should
- * be 6, and xbox360 issuing INQUIRY, TEST UNIT READY and
- * REQUEST SENSE with cbw->Length == 10 where it should
- * be 6 as well.
- */
- if (cmnd_size <= fsg->cmnd_size) {
- DBG(fsg, "%s is buggy! Expected length %d "
- "but we got %d\n", name,
- cmnd_size, fsg->cmnd_size);
- cmnd_size = fsg->cmnd_size;
- } else {
- fsg->phase_error = 1;
- return -EINVAL;
- }
- }
-
- /* Check that the LUN values are consistent */
- if (transport_is_bbb()) {
- if (fsg->lun != lun)
- DBG(fsg, "using LUN %d from CBW, "
- "not LUN %d from CDB\n",
- fsg->lun, lun);
- }
-
- /* Check the LUN */
- curlun = fsg->curlun;
- if (curlun) {
- if (fsg->cmnd[0] != REQUEST_SENSE) {
- curlun->sense_data = SS_NO_SENSE;
- curlun->sense_data_info = 0;
- curlun->info_valid = 0;
- }
- } else {
- fsg->bad_lun_okay = 0;
-
- /* INQUIRY and REQUEST SENSE commands are explicitly allowed
- * to use unsupported LUNs; all others may not. */
- if (fsg->cmnd[0] != INQUIRY &&
- fsg->cmnd[0] != REQUEST_SENSE) {
- DBG(fsg, "unsupported LUN %d\n", fsg->lun);
- return -EINVAL;
- }
- }
-
- /* If a unit attention condition exists, only INQUIRY and
- * REQUEST SENSE commands are allowed; anything else must fail. */
- if (curlun && curlun->unit_attention_data != SS_NO_SENSE &&
- fsg->cmnd[0] != INQUIRY &&
- fsg->cmnd[0] != REQUEST_SENSE) {
- curlun->sense_data = curlun->unit_attention_data;
- curlun->unit_attention_data = SS_NO_SENSE;
- return -EINVAL;
- }
-
- /* Check that only command bytes listed in the mask are non-zero */
- fsg->cmnd[1] &= 0x1f; // Mask away the LUN
- for (i = 1; i < cmnd_size; ++i) {
- if (fsg->cmnd[i] && !(mask & (1 << i))) {
- if (curlun)
- curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
- return -EINVAL;
- }
- }
-
- /* If the medium isn't mounted and the command needs to access
- * it, return an error. */
- if (curlun && !fsg_lun_is_open(curlun) && needs_medium) {
- curlun->sense_data = SS_MEDIUM_NOT_PRESENT;
- return -EINVAL;
- }
-
- return 0;
-}
-
-/* wrapper of check_command for data size in blocks handling */
-static int check_command_size_in_blocks(struct fsg_dev *fsg, int cmnd_size,
- enum data_direction data_dir, unsigned int mask,
- int needs_medium, const char *name)
-{
- if (fsg->curlun)
- fsg->data_size_from_cmnd <<= fsg->curlun->blkbits;
- return check_command(fsg, cmnd_size, data_dir,
- mask, needs_medium, name);
-}
-
-static int do_scsi_command(struct fsg_dev *fsg)
-{
- struct fsg_buffhd *bh;
- int rc;
- int reply = -EINVAL;
- int i;
- static char unknown[16];
-
- dump_cdb(fsg);
-
- /* Wait for the next buffer to become available for data or status */
- bh = fsg->next_buffhd_to_drain = fsg->next_buffhd_to_fill;
- while (bh->state != BUF_STATE_EMPTY) {
- rc = sleep_thread(fsg);
- if (rc)
- return rc;
- }
- fsg->phase_error = 0;
- fsg->short_packet_received = 0;
-
- down_read(&fsg->filesem); // We're using the backing file
- switch (fsg->cmnd[0]) {
-
- case INQUIRY:
- fsg->data_size_from_cmnd = fsg->cmnd[4];
- if ((reply = check_command(fsg, 6, DATA_DIR_TO_HOST,
- (1<<4), 0,
- "INQUIRY")) == 0)
- reply = do_inquiry(fsg, bh);
- break;
-
- case MODE_SELECT:
- fsg->data_size_from_cmnd = fsg->cmnd[4];
- if ((reply = check_command(fsg, 6, DATA_DIR_FROM_HOST,
- (1<<1) | (1<<4), 0,
- "MODE SELECT(6)")) == 0)
- reply = do_mode_select(fsg, bh);
- break;
-
- case MODE_SELECT_10:
- fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]);
- if ((reply = check_command(fsg, 10, DATA_DIR_FROM_HOST,
- (1<<1) | (3<<7), 0,
- "MODE SELECT(10)")) == 0)
- reply = do_mode_select(fsg, bh);
- break;
-
- case MODE_SENSE:
- fsg->data_size_from_cmnd = fsg->cmnd[4];
- if ((reply = check_command(fsg, 6, DATA_DIR_TO_HOST,
- (1<<1) | (1<<2) | (1<<4), 0,
- "MODE SENSE(6)")) == 0)
- reply = do_mode_sense(fsg, bh);
- break;
-
- case MODE_SENSE_10:
- fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]);
- if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST,
- (1<<1) | (1<<2) | (3<<7), 0,
- "MODE SENSE(10)")) == 0)
- reply = do_mode_sense(fsg, bh);
- break;
-
- case ALLOW_MEDIUM_REMOVAL:
- fsg->data_size_from_cmnd = 0;
- if ((reply = check_command(fsg, 6, DATA_DIR_NONE,
- (1<<4), 0,
- "PREVENT-ALLOW MEDIUM REMOVAL")) == 0)
- reply = do_prevent_allow(fsg);
- break;
-
- case READ_6:
- i = fsg->cmnd[4];
- fsg->data_size_from_cmnd = (i == 0) ? 256 : i;
- if ((reply = check_command_size_in_blocks(fsg, 6,
- DATA_DIR_TO_HOST,
- (7<<1) | (1<<4), 1,
- "READ(6)")) == 0)
- reply = do_read(fsg);
- break;
-
- case READ_10:
- fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]);
- if ((reply = check_command_size_in_blocks(fsg, 10,
- DATA_DIR_TO_HOST,
- (1<<1) | (0xf<<2) | (3<<7), 1,
- "READ(10)")) == 0)
- reply = do_read(fsg);
- break;
-
- case READ_12:
- fsg->data_size_from_cmnd = get_unaligned_be32(&fsg->cmnd[6]);
- if ((reply = check_command_size_in_blocks(fsg, 12,
- DATA_DIR_TO_HOST,
- (1<<1) | (0xf<<2) | (0xf<<6), 1,
- "READ(12)")) == 0)
- reply = do_read(fsg);
- break;
-
- case READ_CAPACITY:
- fsg->data_size_from_cmnd = 8;
- if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST,
- (0xf<<2) | (1<<8), 1,
- "READ CAPACITY")) == 0)
- reply = do_read_capacity(fsg, bh);
- break;
-
- case READ_HEADER:
- if (!mod_data.cdrom)
- goto unknown_cmnd;
- fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]);
- if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST,
- (3<<7) | (0x1f<<1), 1,
- "READ HEADER")) == 0)
- reply = do_read_header(fsg, bh);
- break;
-
- case READ_TOC:
- if (!mod_data.cdrom)
- goto unknown_cmnd;
- fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]);
- if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST,
- (7<<6) | (1<<1), 1,
- "READ TOC")) == 0)
- reply = do_read_toc(fsg, bh);
- break;
-
- case READ_FORMAT_CAPACITIES:
- fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]);
- if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST,
- (3<<7), 1,
- "READ FORMAT CAPACITIES")) == 0)
- reply = do_read_format_capacities(fsg, bh);
- break;
-
- case REQUEST_SENSE:
- fsg->data_size_from_cmnd = fsg->cmnd[4];
- if ((reply = check_command(fsg, 6, DATA_DIR_TO_HOST,
- (1<<4), 0,
- "REQUEST SENSE")) == 0)
- reply = do_request_sense(fsg, bh);
- break;
-
- case START_STOP:
- fsg->data_size_from_cmnd = 0;
- if ((reply = check_command(fsg, 6, DATA_DIR_NONE,
- (1<<1) | (1<<4), 0,
- "START-STOP UNIT")) == 0)
- reply = do_start_stop(fsg);
- break;
-
- case SYNCHRONIZE_CACHE:
- fsg->data_size_from_cmnd = 0;
- if ((reply = check_command(fsg, 10, DATA_DIR_NONE,
- (0xf<<2) | (3<<7), 1,
- "SYNCHRONIZE CACHE")) == 0)
- reply = do_synchronize_cache(fsg);
- break;
-
- case TEST_UNIT_READY:
- fsg->data_size_from_cmnd = 0;
- reply = check_command(fsg, 6, DATA_DIR_NONE,
- 0, 1,
- "TEST UNIT READY");
- break;
-
- /* Although optional, this command is used by MS-Windows. We
- * support a minimal version: BytChk must be 0. */
- case VERIFY:
- fsg->data_size_from_cmnd = 0;
- if ((reply = check_command(fsg, 10, DATA_DIR_NONE,
- (1<<1) | (0xf<<2) | (3<<7), 1,
- "VERIFY")) == 0)
- reply = do_verify(fsg);
- break;
-
- case WRITE_6:
- i = fsg->cmnd[4];
- fsg->data_size_from_cmnd = (i == 0) ? 256 : i;
- if ((reply = check_command_size_in_blocks(fsg, 6,
- DATA_DIR_FROM_HOST,
- (7<<1) | (1<<4), 1,
- "WRITE(6)")) == 0)
- reply = do_write(fsg);
- break;
-
- case WRITE_10:
- fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]);
- if ((reply = check_command_size_in_blocks(fsg, 10,
- DATA_DIR_FROM_HOST,
- (1<<1) | (0xf<<2) | (3<<7), 1,
- "WRITE(10)")) == 0)
- reply = do_write(fsg);
- break;
-
- case WRITE_12:
- fsg->data_size_from_cmnd = get_unaligned_be32(&fsg->cmnd[6]);
- if ((reply = check_command_size_in_blocks(fsg, 12,
- DATA_DIR_FROM_HOST,
- (1<<1) | (0xf<<2) | (0xf<<6), 1,
- "WRITE(12)")) == 0)
- reply = do_write(fsg);
- break;
-
- /* Some mandatory commands that we recognize but don't implement.
- * They don't mean much in this setting. It's left as an exercise
- * for anyone interested to implement RESERVE and RELEASE in terms
- * of Posix locks. */
- case FORMAT_UNIT:
- case RELEASE:
- case RESERVE:
- case SEND_DIAGNOSTIC:
- // Fall through
-
- default:
- unknown_cmnd:
- fsg->data_size_from_cmnd = 0;
- sprintf(unknown, "Unknown x%02x", fsg->cmnd[0]);
- if ((reply = check_command(fsg, fsg->cmnd_size,
- DATA_DIR_UNKNOWN, ~0, 0, unknown)) == 0) {
- fsg->curlun->sense_data = SS_INVALID_COMMAND;
- reply = -EINVAL;
- }
- break;
- }
- up_read(&fsg->filesem);
-
- if (reply == -EINTR || signal_pending(current))
- return -EINTR;
-
- /* Set up the single reply buffer for finish_reply() */
- if (reply == -EINVAL)
- reply = 0; // Error reply length
- if (reply >= 0 && fsg->data_dir == DATA_DIR_TO_HOST) {
- reply = min((u32) reply, fsg->data_size_from_cmnd);
- bh->inreq->length = reply;
- bh->state = BUF_STATE_FULL;
- fsg->residue -= reply;
- } // Otherwise it's already set
-
- return 0;
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-static int received_cbw(struct fsg_dev *fsg, struct fsg_buffhd *bh)
-{
- struct usb_request *req = bh->outreq;
- struct bulk_cb_wrap *cbw = req->buf;
-
- /* Was this a real packet? Should it be ignored? */
- if (req->status || test_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags))
- return -EINVAL;
-
- /* Is the CBW valid? */
- if (req->actual != US_BULK_CB_WRAP_LEN ||
- cbw->Signature != cpu_to_le32(
- US_BULK_CB_SIGN)) {
- DBG(fsg, "invalid CBW: len %u sig 0x%x\n",
- req->actual,
- le32_to_cpu(cbw->Signature));
-
- /* The Bulk-only spec says we MUST stall the IN endpoint
- * (6.6.1), so it's unavoidable. It also says we must
- * retain this state until the next reset, but there's
- * no way to tell the controller driver it should ignore
- * Clear-Feature(HALT) requests.
- *
- * We aren't required to halt the OUT endpoint; instead
- * we can simply accept and discard any data received
- * until the next reset. */
- wedge_bulk_in_endpoint(fsg);
- set_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags);
- return -EINVAL;
- }
-
- /* Is the CBW meaningful? */
- if (cbw->Lun >= FSG_MAX_LUNS || cbw->Flags & ~US_BULK_FLAG_IN ||
- cbw->Length <= 0 || cbw->Length > MAX_COMMAND_SIZE) {
- DBG(fsg, "non-meaningful CBW: lun = %u, flags = 0x%x, "
- "cmdlen %u\n",
- cbw->Lun, cbw->Flags, cbw->Length);
-
- /* We can do anything we want here, so let's stall the
- * bulk pipes if we are allowed to. */
- if (mod_data.can_stall) {
- fsg_set_halt(fsg, fsg->bulk_out);
- halt_bulk_in_endpoint(fsg);
- }
- return -EINVAL;
- }
-
- /* Save the command for later */
- fsg->cmnd_size = cbw->Length;
- memcpy(fsg->cmnd, cbw->CDB, fsg->cmnd_size);
- if (cbw->Flags & US_BULK_FLAG_IN)
- fsg->data_dir = DATA_DIR_TO_HOST;
- else
- fsg->data_dir = DATA_DIR_FROM_HOST;
- fsg->data_size = le32_to_cpu(cbw->DataTransferLength);
- if (fsg->data_size == 0)
- fsg->data_dir = DATA_DIR_NONE;
- fsg->lun = cbw->Lun;
- fsg->tag = cbw->Tag;
- return 0;
-}
-
-
-static int get_next_command(struct fsg_dev *fsg)
-{
- struct fsg_buffhd *bh;
- int rc = 0;
-
- if (transport_is_bbb()) {
-
- /* Wait for the next buffer to become available */
- bh = fsg->next_buffhd_to_fill;
- while (bh->state != BUF_STATE_EMPTY) {
- rc = sleep_thread(fsg);
- if (rc)
- return rc;
- }
-
- /* Queue a request to read a Bulk-only CBW */
- set_bulk_out_req_length(fsg, bh, US_BULK_CB_WRAP_LEN);
- start_transfer(fsg, fsg->bulk_out, bh->outreq,
- &bh->outreq_busy, &bh->state);
-
- /* We will drain the buffer in software, which means we
- * can reuse it for the next filling. No need to advance
- * next_buffhd_to_fill. */
-
- /* Wait for the CBW to arrive */
- while (bh->state != BUF_STATE_FULL) {
- rc = sleep_thread(fsg);
- if (rc)
- return rc;
- }
- smp_rmb();
- rc = received_cbw(fsg, bh);
- bh->state = BUF_STATE_EMPTY;
-
- } else { // USB_PR_CB or USB_PR_CBI
-
- /* Wait for the next command to arrive */
- while (fsg->cbbuf_cmnd_size == 0) {
- rc = sleep_thread(fsg);
- if (rc)
- return rc;
- }
-
- /* Is the previous status interrupt request still busy?
- * The host is allowed to skip reading the status,
- * so we must cancel it. */
- if (fsg->intreq_busy)
- usb_ep_dequeue(fsg->intr_in, fsg->intreq);
-
- /* Copy the command and mark the buffer empty */
- fsg->data_dir = DATA_DIR_UNKNOWN;
- spin_lock_irq(&fsg->lock);
- fsg->cmnd_size = fsg->cbbuf_cmnd_size;
- memcpy(fsg->cmnd, fsg->cbbuf_cmnd, fsg->cmnd_size);
- fsg->cbbuf_cmnd_size = 0;
- spin_unlock_irq(&fsg->lock);
-
- /* Use LUN from the command */
- fsg->lun = fsg->cmnd[1] >> 5;
- }
-
- /* Update current lun */
- if (fsg->lun >= 0 && fsg->lun < fsg->nluns)
- fsg->curlun = &fsg->luns[fsg->lun];
- else
- fsg->curlun = NULL;
-
- return rc;
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-static int enable_endpoint(struct fsg_dev *fsg, struct usb_ep *ep,
- const struct usb_endpoint_descriptor *d)
-{
- int rc;
-
- ep->driver_data = fsg;
- ep->desc = d;
- rc = usb_ep_enable(ep);
- if (rc)
- ERROR(fsg, "can't enable %s, result %d\n", ep->name, rc);
- return rc;
-}
-
-static int alloc_request(struct fsg_dev *fsg, struct usb_ep *ep,
- struct usb_request **preq)
-{
- *preq = usb_ep_alloc_request(ep, GFP_ATOMIC);
- if (*preq)
- return 0;
- ERROR(fsg, "can't allocate request for %s\n", ep->name);
- return -ENOMEM;
-}
-
-/*
- * Reset interface setting and re-init endpoint state (toggle etc).
- * Call with altsetting < 0 to disable the interface. The only other
- * available altsetting is 0, which enables the interface.
- */
-static int do_set_interface(struct fsg_dev *fsg, int altsetting)
-{
- int rc = 0;
- int i;
- const struct usb_endpoint_descriptor *d;
-
- if (fsg->running)
- DBG(fsg, "reset interface\n");
-
-reset:
- /* Deallocate the requests */
- for (i = 0; i < fsg_num_buffers; ++i) {
- struct fsg_buffhd *bh = &fsg->buffhds[i];
-
- if (bh->inreq) {
- usb_ep_free_request(fsg->bulk_in, bh->inreq);
- bh->inreq = NULL;
- }
- if (bh->outreq) {
- usb_ep_free_request(fsg->bulk_out, bh->outreq);
- bh->outreq = NULL;
- }
- }
- if (fsg->intreq) {
- usb_ep_free_request(fsg->intr_in, fsg->intreq);
- fsg->intreq = NULL;
- }
-
- /* Disable the endpoints */
- if (fsg->bulk_in_enabled) {
- usb_ep_disable(fsg->bulk_in);
- fsg->bulk_in_enabled = 0;
- }
- if (fsg->bulk_out_enabled) {
- usb_ep_disable(fsg->bulk_out);
- fsg->bulk_out_enabled = 0;
- }
- if (fsg->intr_in_enabled) {
- usb_ep_disable(fsg->intr_in);
- fsg->intr_in_enabled = 0;
- }
-
- fsg->running = 0;
- if (altsetting < 0 || rc != 0)
- return rc;
-
- DBG(fsg, "set interface %d\n", altsetting);
-
- /* Enable the endpoints */
- d = fsg_ep_desc(fsg->gadget,
- &fsg_fs_bulk_in_desc, &fsg_hs_bulk_in_desc,
- &fsg_ss_bulk_in_desc);
- if ((rc = enable_endpoint(fsg, fsg->bulk_in, d)) != 0)
- goto reset;
- fsg->bulk_in_enabled = 1;
-
- d = fsg_ep_desc(fsg->gadget,
- &fsg_fs_bulk_out_desc, &fsg_hs_bulk_out_desc,
- &fsg_ss_bulk_out_desc);
- if ((rc = enable_endpoint(fsg, fsg->bulk_out, d)) != 0)
- goto reset;
- fsg->bulk_out_enabled = 1;
- fsg->bulk_out_maxpacket = usb_endpoint_maxp(d);
- clear_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags);
-
- if (transport_is_cbi()) {
- d = fsg_ep_desc(fsg->gadget,
- &fsg_fs_intr_in_desc, &fsg_hs_intr_in_desc,
- &fsg_ss_intr_in_desc);
- if ((rc = enable_endpoint(fsg, fsg->intr_in, d)) != 0)
- goto reset;
- fsg->intr_in_enabled = 1;
- }
-
- /* Allocate the requests */
- for (i = 0; i < fsg_num_buffers; ++i) {
- struct fsg_buffhd *bh = &fsg->buffhds[i];
-
- if ((rc = alloc_request(fsg, fsg->bulk_in, &bh->inreq)) != 0)
- goto reset;
- if ((rc = alloc_request(fsg, fsg->bulk_out, &bh->outreq)) != 0)
- goto reset;
- bh->inreq->buf = bh->outreq->buf = bh->buf;
- bh->inreq->context = bh->outreq->context = bh;
- bh->inreq->complete = bulk_in_complete;
- bh->outreq->complete = bulk_out_complete;
- }
- if (transport_is_cbi()) {
- if ((rc = alloc_request(fsg, fsg->intr_in, &fsg->intreq)) != 0)
- goto reset;
- fsg->intreq->complete = intr_in_complete;
- }
-
- fsg->running = 1;
- for (i = 0; i < fsg->nluns; ++i)
- fsg->luns[i].unit_attention_data = SS_RESET_OCCURRED;
- return rc;
-}
-
-
-/*
- * Change our operational configuration. This code must agree with the code
- * that returns config descriptors, and with interface altsetting code.
- *
- * It's also responsible for power management interactions. Some
- * configurations might not work with our current power sources.
- * For now we just assume the gadget is always self-powered.
- */
-static int do_set_config(struct fsg_dev *fsg, u8 new_config)
-{
- int rc = 0;
-
- /* Disable the single interface */
- if (fsg->config != 0) {
- DBG(fsg, "reset config\n");
- fsg->config = 0;
- rc = do_set_interface(fsg, -1);
- }
-
- /* Enable the interface */
- if (new_config != 0) {
- fsg->config = new_config;
- if ((rc = do_set_interface(fsg, 0)) != 0)
- fsg->config = 0; // Reset on errors
- else
- INFO(fsg, "%s config #%d\n",
- usb_speed_string(fsg->gadget->speed),
- fsg->config);
- }
- return rc;
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-static void handle_exception(struct fsg_dev *fsg)
-{
- siginfo_t info;
- int sig;
- int i;
- int num_active;
- struct fsg_buffhd *bh;
- enum fsg_state old_state;
- u8 new_config;
- struct fsg_lun *curlun;
- unsigned int exception_req_tag;
- int rc;
-
- /* Clear the existing signals. Anything but SIGUSR1 is converted
- * into a high-priority EXIT exception. */
- for (;;) {
- sig = dequeue_signal_lock(current, ¤t->blocked, &info);
- if (!sig)
- break;
- if (sig != SIGUSR1) {
- if (fsg->state < FSG_STATE_EXIT)
- DBG(fsg, "Main thread exiting on signal\n");
- raise_exception(fsg, FSG_STATE_EXIT);
- }
- }
-
- /* Cancel all the pending transfers */
- if (fsg->intreq_busy)
- usb_ep_dequeue(fsg->intr_in, fsg->intreq);
- for (i = 0; i < fsg_num_buffers; ++i) {
- bh = &fsg->buffhds[i];
- if (bh->inreq_busy)
- usb_ep_dequeue(fsg->bulk_in, bh->inreq);
- if (bh->outreq_busy)
- usb_ep_dequeue(fsg->bulk_out, bh->outreq);
- }
-
- /* Wait until everything is idle */
- for (;;) {
- num_active = fsg->intreq_busy;
- for (i = 0; i < fsg_num_buffers; ++i) {
- bh = &fsg->buffhds[i];
- num_active += bh->inreq_busy + bh->outreq_busy;
- }
- if (num_active == 0)
- break;
- if (sleep_thread(fsg))
- return;
- }
-
- /* Clear out the controller's fifos */
- if (fsg->bulk_in_enabled)
- usb_ep_fifo_flush(fsg->bulk_in);
- if (fsg->bulk_out_enabled)
- usb_ep_fifo_flush(fsg->bulk_out);
- if (fsg->intr_in_enabled)
- usb_ep_fifo_flush(fsg->intr_in);
-
- /* Reset the I/O buffer states and pointers, the SCSI
- * state, and the exception. Then invoke the handler. */
- spin_lock_irq(&fsg->lock);
-
- for (i = 0; i < fsg_num_buffers; ++i) {
- bh = &fsg->buffhds[i];
- bh->state = BUF_STATE_EMPTY;
- }
- fsg->next_buffhd_to_fill = fsg->next_buffhd_to_drain =
- &fsg->buffhds[0];
-
- exception_req_tag = fsg->exception_req_tag;
- new_config = fsg->new_config;
- old_state = fsg->state;
-
- if (old_state == FSG_STATE_ABORT_BULK_OUT)
- fsg->state = FSG_STATE_STATUS_PHASE;
- else {
- for (i = 0; i < fsg->nluns; ++i) {
- curlun = &fsg->luns[i];
- curlun->prevent_medium_removal = 0;
- curlun->sense_data = curlun->unit_attention_data =
- SS_NO_SENSE;
- curlun->sense_data_info = 0;
- curlun->info_valid = 0;
- }
- fsg->state = FSG_STATE_IDLE;
- }
- spin_unlock_irq(&fsg->lock);
-
- /* Carry out any extra actions required for the exception */
- switch (old_state) {
- default:
- break;
-
- case FSG_STATE_ABORT_BULK_OUT:
- send_status(fsg);
- spin_lock_irq(&fsg->lock);
- if (fsg->state == FSG_STATE_STATUS_PHASE)
- fsg->state = FSG_STATE_IDLE;
- spin_unlock_irq(&fsg->lock);
- break;
-
- case FSG_STATE_RESET:
- /* In case we were forced against our will to halt a
- * bulk endpoint, clear the halt now. (The SuperH UDC
- * requires this.) */
- if (test_and_clear_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags))
- usb_ep_clear_halt(fsg->bulk_in);
-
- if (transport_is_bbb()) {
- if (fsg->ep0_req_tag == exception_req_tag)
- ep0_queue(fsg); // Complete the status stage
-
- } else if (transport_is_cbi())
- send_status(fsg); // Status by interrupt pipe
-
- /* Technically this should go here, but it would only be
- * a waste of time. Ditto for the INTERFACE_CHANGE and
- * CONFIG_CHANGE cases. */
- // for (i = 0; i < fsg->nluns; ++i)
- // fsg->luns[i].unit_attention_data = SS_RESET_OCCURRED;
- break;
-
- case FSG_STATE_INTERFACE_CHANGE:
- rc = do_set_interface(fsg, 0);
- if (fsg->ep0_req_tag != exception_req_tag)
- break;
- if (rc != 0) // STALL on errors
- fsg_set_halt(fsg, fsg->ep0);
- else // Complete the status stage
- ep0_queue(fsg);
- break;
-
- case FSG_STATE_CONFIG_CHANGE:
- rc = do_set_config(fsg, new_config);
- if (fsg->ep0_req_tag != exception_req_tag)
- break;
- if (rc != 0) // STALL on errors
- fsg_set_halt(fsg, fsg->ep0);
- else // Complete the status stage
- ep0_queue(fsg);
- break;
-
- case FSG_STATE_DISCONNECT:
- for (i = 0; i < fsg->nluns; ++i)
- fsg_lun_fsync_sub(fsg->luns + i);
- do_set_config(fsg, 0); // Unconfigured state
- break;
-
- case FSG_STATE_EXIT:
- case FSG_STATE_TERMINATED:
- do_set_config(fsg, 0); // Free resources
- spin_lock_irq(&fsg->lock);
- fsg->state = FSG_STATE_TERMINATED; // Stop the thread
- spin_unlock_irq(&fsg->lock);
- break;
- }
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-static int fsg_main_thread(void *fsg_)
-{
- struct fsg_dev *fsg = fsg_;
-
- /* Allow the thread to be killed by a signal, but set the signal mask
- * to block everything but INT, TERM, KILL, and USR1. */
- allow_signal(SIGINT);
- allow_signal(SIGTERM);
- allow_signal(SIGKILL);
- allow_signal(SIGUSR1);
-
- /* Allow the thread to be frozen */
- set_freezable();
-
- /* Arrange for userspace references to be interpreted as kernel
- * pointers. That way we can pass a kernel pointer to a routine
- * that expects a __user pointer and it will work okay. */
- set_fs(get_ds());
-
- /* The main loop */
- while (fsg->state != FSG_STATE_TERMINATED) {
- if (exception_in_progress(fsg) || signal_pending(current)) {
- handle_exception(fsg);
- continue;
- }
-
- if (!fsg->running) {
- sleep_thread(fsg);
- continue;
- }
-
- if (get_next_command(fsg))
- continue;
-
- spin_lock_irq(&fsg->lock);
- if (!exception_in_progress(fsg))
- fsg->state = FSG_STATE_DATA_PHASE;
- spin_unlock_irq(&fsg->lock);
-
- if (do_scsi_command(fsg) || finish_reply(fsg))
- continue;
-
- spin_lock_irq(&fsg->lock);
- if (!exception_in_progress(fsg))
- fsg->state = FSG_STATE_STATUS_PHASE;
- spin_unlock_irq(&fsg->lock);
-
- if (send_status(fsg))
- continue;
-
- spin_lock_irq(&fsg->lock);
- if (!exception_in_progress(fsg))
- fsg->state = FSG_STATE_IDLE;
- spin_unlock_irq(&fsg->lock);
- }
-
- spin_lock_irq(&fsg->lock);
- fsg->thread_task = NULL;
- spin_unlock_irq(&fsg->lock);
-
- /* If we are exiting because of a signal, unregister the
- * gadget driver. */
- if (test_and_clear_bit(REGISTERED, &fsg->atomic_bitflags))
- usb_gadget_unregister_driver(&fsg_driver);
-
- /* Let the unbind and cleanup routines know the thread has exited */
- complete_and_exit(&fsg->thread_notifier, 0);
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-
-/* The write permissions and store_xxx pointers are set in fsg_bind() */
-static DEVICE_ATTR(ro, 0444, fsg_show_ro, NULL);
-static DEVICE_ATTR(nofua, 0644, fsg_show_nofua, NULL);
-static DEVICE_ATTR(file, 0444, fsg_show_file, NULL);
-
-
-/*-------------------------------------------------------------------------*/
-
-static void fsg_release(struct kref *ref)
-{
- struct fsg_dev *fsg = container_of(ref, struct fsg_dev, ref);
-
- kfree(fsg->luns);
- kfree(fsg);
-}
-
-static void lun_release(struct device *dev)
-{
- struct rw_semaphore *filesem = dev_get_drvdata(dev);
- struct fsg_dev *fsg =
- container_of(filesem, struct fsg_dev, filesem);
-
- kref_put(&fsg->ref, fsg_release);
-}
-
-static void /* __init_or_exit */ fsg_unbind(struct usb_gadget *gadget)
-{
- struct fsg_dev *fsg = get_gadget_data(gadget);
- int i;
- struct fsg_lun *curlun;
- struct usb_request *req = fsg->ep0req;
-
- DBG(fsg, "unbind\n");
- clear_bit(REGISTERED, &fsg->atomic_bitflags);
-
- /* If the thread isn't already dead, tell it to exit now */
- if (fsg->state != FSG_STATE_TERMINATED) {
- raise_exception(fsg, FSG_STATE_EXIT);
- wait_for_completion(&fsg->thread_notifier);
-
- /* The cleanup routine waits for this completion also */
- complete(&fsg->thread_notifier);
- }
-
- /* Unregister the sysfs attribute files and the LUNs */
- for (i = 0; i < fsg->nluns; ++i) {
- curlun = &fsg->luns[i];
- if (curlun->registered) {
- device_remove_file(&curlun->dev, &dev_attr_nofua);
- device_remove_file(&curlun->dev, &dev_attr_ro);
- device_remove_file(&curlun->dev, &dev_attr_file);
- fsg_lun_close(curlun);
- device_unregister(&curlun->dev);
- curlun->registered = 0;
- }
- }
-
- /* Free the data buffers */
- for (i = 0; i < fsg_num_buffers; ++i)
- kfree(fsg->buffhds[i].buf);
-
- /* Free the request and buffer for endpoint 0 */
- if (req) {
- kfree(req->buf);
- usb_ep_free_request(fsg->ep0, req);
- }
-
- set_gadget_data(gadget, NULL);
-}
-
-
-static int __init check_parameters(struct fsg_dev *fsg)
-{
- int prot;
-
- /* Store the default values */
- mod_data.transport_type = USB_PR_BULK;
- mod_data.transport_name = "Bulk-only";
- mod_data.protocol_type = USB_SC_SCSI;
- mod_data.protocol_name = "Transparent SCSI";
-
- /* Some peripheral controllers are known not to be able to
- * halt bulk endpoints correctly. If one of them is present,
- * disable stalls.
- */
- if (gadget_is_at91(fsg->gadget))
- mod_data.can_stall = 0;
-
- if (mod_data.release == 0xffff)
- mod_data.release = get_default_bcdDevice();
-
- prot = simple_strtol(mod_data.protocol_parm, NULL, 0);
-
-#ifdef CONFIG_USB_FILE_STORAGE_TEST
- if (strnicmp(mod_data.transport_parm, "BBB", 10) == 0) {
- ; // Use default setting
- } else if (strnicmp(mod_data.transport_parm, "CB", 10) == 0) {
- mod_data.transport_type = USB_PR_CB;
- mod_data.transport_name = "Control-Bulk";
- } else if (strnicmp(mod_data.transport_parm, "CBI", 10) == 0) {
- mod_data.transport_type = USB_PR_CBI;
- mod_data.transport_name = "Control-Bulk-Interrupt";
- } else {
- ERROR(fsg, "invalid transport: %s\n", mod_data.transport_parm);
- return -EINVAL;
- }
-
- if (strnicmp(mod_data.protocol_parm, "SCSI", 10) == 0 ||
- prot == USB_SC_SCSI) {
- ; // Use default setting
- } else if (strnicmp(mod_data.protocol_parm, "RBC", 10) == 0 ||
- prot == USB_SC_RBC) {
- mod_data.protocol_type = USB_SC_RBC;
- mod_data.protocol_name = "RBC";
- } else if (strnicmp(mod_data.protocol_parm, "8020", 4) == 0 ||
- strnicmp(mod_data.protocol_parm, "ATAPI", 10) == 0 ||
- prot == USB_SC_8020) {
- mod_data.protocol_type = USB_SC_8020;
- mod_data.protocol_name = "8020i (ATAPI)";
- } else if (strnicmp(mod_data.protocol_parm, "QIC", 3) == 0 ||
- prot == USB_SC_QIC) {
- mod_data.protocol_type = USB_SC_QIC;
- mod_data.protocol_name = "QIC-157";
- } else if (strnicmp(mod_data.protocol_parm, "UFI", 10) == 0 ||
- prot == USB_SC_UFI) {
- mod_data.protocol_type = USB_SC_UFI;
- mod_data.protocol_name = "UFI";
- } else if (strnicmp(mod_data.protocol_parm, "8070", 4) == 0 ||
- prot == USB_SC_8070) {
- mod_data.protocol_type = USB_SC_8070;
- mod_data.protocol_name = "8070i";
- } else {
- ERROR(fsg, "invalid protocol: %s\n", mod_data.protocol_parm);
- return -EINVAL;
- }
-
- mod_data.buflen &= PAGE_CACHE_MASK;
- if (mod_data.buflen <= 0) {
- ERROR(fsg, "invalid buflen\n");
- return -ETOOSMALL;
- }
-
-#endif /* CONFIG_USB_FILE_STORAGE_TEST */
-
- /* Serial string handling.
- * On a real device, the serial string would be loaded
- * from permanent storage. */
- if (mod_data.serial) {
- const char *ch;
- unsigned len = 0;
-
- /* Sanity check :
- * The CB[I] specification limits the serial string to
- * 12 uppercase hexadecimal characters.
- * BBB need at least 12 uppercase hexadecimal characters,
- * with a maximum of 126. */
- for (ch = mod_data.serial; *ch; ++ch) {
- ++len;
- if ((*ch < '0' || *ch > '9') &&
- (*ch < 'A' || *ch > 'F')) { /* not uppercase hex */
- WARNING(fsg,
- "Invalid serial string character: %c\n",
- *ch);
- goto no_serial;
- }
- }
- if (len > 126 ||
- (mod_data.transport_type == USB_PR_BULK && len < 12) ||
- (mod_data.transport_type != USB_PR_BULK && len > 12)) {
- WARNING(fsg, "Invalid serial string length!\n");
- goto no_serial;
- }
- fsg_strings[FSG_STRING_SERIAL - 1].s = mod_data.serial;
- } else {
- WARNING(fsg, "No serial-number string provided!\n");
- no_serial:
- device_desc.iSerialNumber = 0;
- }
-
- return 0;
-}
-
-
-static int __init fsg_bind(struct usb_gadget *gadget,
- struct usb_gadget_driver *driver)
-{
- struct fsg_dev *fsg = the_fsg;
- int rc;
- int i;
- struct fsg_lun *curlun;
- struct usb_ep *ep;
- struct usb_request *req;
- char *pathbuf, *p;
-
- fsg->gadget = gadget;
- set_gadget_data(gadget, fsg);
- fsg->ep0 = gadget->ep0;
- fsg->ep0->driver_data = fsg;
-
- if ((rc = check_parameters(fsg)) != 0)
- goto out;
-
- if (mod_data.removable) { // Enable the store_xxx attributes
- dev_attr_file.attr.mode = 0644;
- dev_attr_file.store = fsg_store_file;
- if (!mod_data.cdrom) {
- dev_attr_ro.attr.mode = 0644;
- dev_attr_ro.store = fsg_store_ro;
- }
- }
-
- /* Only for removable media? */
- dev_attr_nofua.attr.mode = 0644;
- dev_attr_nofua.store = fsg_store_nofua;
-
- /* Find out how many LUNs there should be */
- i = mod_data.nluns;
- if (i == 0)
- i = max(mod_data.num_filenames, 1u);
- if (i > FSG_MAX_LUNS) {
- ERROR(fsg, "invalid number of LUNs: %d\n", i);
- rc = -EINVAL;
- goto out;
- }
-
- /* Create the LUNs, open their backing files, and register the
- * LUN devices in sysfs. */
- fsg->luns = kzalloc(i * sizeof(struct fsg_lun), GFP_KERNEL);
- if (!fsg->luns) {
- rc = -ENOMEM;
- goto out;
- }
- fsg->nluns = i;
-
- for (i = 0; i < fsg->nluns; ++i) {
- curlun = &fsg->luns[i];
- curlun->cdrom = !!mod_data.cdrom;
- curlun->ro = mod_data.cdrom || mod_data.ro[i];
- curlun->initially_ro = curlun->ro;
- curlun->removable = mod_data.removable;
- curlun->nofua = mod_data.nofua[i];
- curlun->dev.release = lun_release;
- curlun->dev.parent = &gadget->dev;
- curlun->dev.driver = &fsg_driver.driver;
- dev_set_drvdata(&curlun->dev, &fsg->filesem);
- dev_set_name(&curlun->dev,"%s-lun%d",
- dev_name(&gadget->dev), i);
-
- kref_get(&fsg->ref);
- rc = device_register(&curlun->dev);
- if (rc) {
- INFO(fsg, "failed to register LUN%d: %d\n", i, rc);
- put_device(&curlun->dev);
- goto out;
- }
- curlun->registered = 1;
-
- rc = device_create_file(&curlun->dev, &dev_attr_ro);
- if (rc)
- goto out;
- rc = device_create_file(&curlun->dev, &dev_attr_nofua);
- if (rc)
- goto out;
- rc = device_create_file(&curlun->dev, &dev_attr_file);
- if (rc)
- goto out;
-
- if (mod_data.file[i] && *mod_data.file[i]) {
- rc = fsg_lun_open(curlun, mod_data.file[i]);
- if (rc)
- goto out;
- } else if (!mod_data.removable) {
- ERROR(fsg, "no file given for LUN%d\n", i);
- rc = -EINVAL;
- goto out;
- }
- }
-
- /* Find all the endpoints we will use */
- usb_ep_autoconfig_reset(gadget);
- ep = usb_ep_autoconfig(gadget, &fsg_fs_bulk_in_desc);
- if (!ep)
- goto autoconf_fail;
- ep->driver_data = fsg; // claim the endpoint
- fsg->bulk_in = ep;
-
- ep = usb_ep_autoconfig(gadget, &fsg_fs_bulk_out_desc);
- if (!ep)
- goto autoconf_fail;
- ep->driver_data = fsg; // claim the endpoint
- fsg->bulk_out = ep;
-
- if (transport_is_cbi()) {
- ep = usb_ep_autoconfig(gadget, &fsg_fs_intr_in_desc);
- if (!ep)
- goto autoconf_fail;
- ep->driver_data = fsg; // claim the endpoint
- fsg->intr_in = ep;
- }
-
- /* Fix up the descriptors */
- device_desc.idVendor = cpu_to_le16(mod_data.vendor);
- device_desc.idProduct = cpu_to_le16(mod_data.product);
- device_desc.bcdDevice = cpu_to_le16(mod_data.release);
-
- i = (transport_is_cbi() ? 3 : 2); // Number of endpoints
- fsg_intf_desc.bNumEndpoints = i;
- fsg_intf_desc.bInterfaceSubClass = mod_data.protocol_type;
- fsg_intf_desc.bInterfaceProtocol = mod_data.transport_type;
- fsg_fs_function[i + FSG_FS_FUNCTION_PRE_EP_ENTRIES] = NULL;
-
- if (gadget_is_dualspeed(gadget)) {
- fsg_hs_function[i + FSG_HS_FUNCTION_PRE_EP_ENTRIES] = NULL;
-
- /* Assume endpoint addresses are the same for both speeds */
- fsg_hs_bulk_in_desc.bEndpointAddress =
- fsg_fs_bulk_in_desc.bEndpointAddress;
- fsg_hs_bulk_out_desc.bEndpointAddress =
- fsg_fs_bulk_out_desc.bEndpointAddress;
- fsg_hs_intr_in_desc.bEndpointAddress =
- fsg_fs_intr_in_desc.bEndpointAddress;
- }
-
- if (gadget_is_superspeed(gadget)) {
- unsigned max_burst;
-
- fsg_ss_function[i + FSG_SS_FUNCTION_PRE_EP_ENTRIES] = NULL;
-
- /* Calculate bMaxBurst, we know packet size is 1024 */
- max_burst = min_t(unsigned, mod_data.buflen / 1024, 15);
-
- /* Assume endpoint addresses are the same for both speeds */
- fsg_ss_bulk_in_desc.bEndpointAddress =
- fsg_fs_bulk_in_desc.bEndpointAddress;
- fsg_ss_bulk_in_comp_desc.bMaxBurst = max_burst;
-
- fsg_ss_bulk_out_desc.bEndpointAddress =
- fsg_fs_bulk_out_desc.bEndpointAddress;
- fsg_ss_bulk_out_comp_desc.bMaxBurst = max_burst;
- }
-
- if (gadget_is_otg(gadget))
- fsg_otg_desc.bmAttributes |= USB_OTG_HNP;
-
- rc = -ENOMEM;
-
- /* Allocate the request and buffer for endpoint 0 */
- fsg->ep0req = req = usb_ep_alloc_request(fsg->ep0, GFP_KERNEL);
- if (!req)
- goto out;
- req->buf = kmalloc(EP0_BUFSIZE, GFP_KERNEL);
- if (!req->buf)
- goto out;
- req->complete = ep0_complete;
-
- /* Allocate the data buffers */
- for (i = 0; i < fsg_num_buffers; ++i) {
- struct fsg_buffhd *bh = &fsg->buffhds[i];
-
- /* Allocate for the bulk-in endpoint. We assume that
- * the buffer will also work with the bulk-out (and
- * interrupt-in) endpoint. */
- bh->buf = kmalloc(mod_data.buflen, GFP_KERNEL);
- if (!bh->buf)
- goto out;
- bh->next = bh + 1;
- }
- fsg->buffhds[fsg_num_buffers - 1].next = &fsg->buffhds[0];
-
- /* This should reflect the actual gadget power source */
- usb_gadget_set_selfpowered(gadget);
-
- snprintf(fsg_string_manufacturer, sizeof fsg_string_manufacturer,
- "%s %s with %s",
- init_utsname()->sysname, init_utsname()->release,
- gadget->name);
-
- fsg->thread_task = kthread_create(fsg_main_thread, fsg,
- "file-storage-gadget");
- if (IS_ERR(fsg->thread_task)) {
- rc = PTR_ERR(fsg->thread_task);
- goto out;
- }
-
- INFO(fsg, DRIVER_DESC ", version: " DRIVER_VERSION "\n");
- INFO(fsg, "NOTE: This driver is deprecated. "
- "Consider using g_mass_storage instead.\n");
- INFO(fsg, "Number of LUNs=%d\n", fsg->nluns);
-
- pathbuf = kmalloc(PATH_MAX, GFP_KERNEL);
- for (i = 0; i < fsg->nluns; ++i) {
- curlun = &fsg->luns[i];
- if (fsg_lun_is_open(curlun)) {
- p = NULL;
- if (pathbuf) {
- p = d_path(&curlun->filp->f_path,
- pathbuf, PATH_MAX);
- if (IS_ERR(p))
- p = NULL;
- }
- LINFO(curlun, "ro=%d, nofua=%d, file: %s\n",
- curlun->ro, curlun->nofua, (p ? p : "(error)"));
- }
- }
- kfree(pathbuf);
-
- DBG(fsg, "transport=%s (x%02x)\n",
- mod_data.transport_name, mod_data.transport_type);
- DBG(fsg, "protocol=%s (x%02x)\n",
- mod_data.protocol_name, mod_data.protocol_type);
- DBG(fsg, "VendorID=x%04x, ProductID=x%04x, Release=x%04x\n",
- mod_data.vendor, mod_data.product, mod_data.release);
- DBG(fsg, "removable=%d, stall=%d, cdrom=%d, buflen=%u\n",
- mod_data.removable, mod_data.can_stall,
- mod_data.cdrom, mod_data.buflen);
- DBG(fsg, "I/O thread pid: %d\n", task_pid_nr(fsg->thread_task));
-
- set_bit(REGISTERED, &fsg->atomic_bitflags);
-
- /* Tell the thread to start working */
- wake_up_process(fsg->thread_task);
- return 0;
-
-autoconf_fail:
- ERROR(fsg, "unable to autoconfigure all endpoints\n");
- rc = -ENOTSUPP;
-
-out:
- fsg->state = FSG_STATE_TERMINATED; // The thread is dead
- fsg_unbind(gadget);
- complete(&fsg->thread_notifier);
- return rc;
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-static void fsg_suspend(struct usb_gadget *gadget)
-{
- struct fsg_dev *fsg = get_gadget_data(gadget);
-
- DBG(fsg, "suspend\n");
- set_bit(SUSPENDED, &fsg->atomic_bitflags);
-}
-
-static void fsg_resume(struct usb_gadget *gadget)
-{
- struct fsg_dev *fsg = get_gadget_data(gadget);
-
- DBG(fsg, "resume\n");
- clear_bit(SUSPENDED, &fsg->atomic_bitflags);
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-static __refdata struct usb_gadget_driver fsg_driver = {
- .max_speed = USB_SPEED_SUPER,
- .function = (char *) fsg_string_product,
- .bind = fsg_bind,
- .unbind = fsg_unbind,
- .disconnect = fsg_disconnect,
- .setup = fsg_setup,
- .suspend = fsg_suspend,
- .resume = fsg_resume,
-
- .driver = {
- .name = DRIVER_NAME,
- .owner = THIS_MODULE,
- // .release = ...
- // .suspend = ...
- // .resume = ...
- },
-};
-
-
-static int __init fsg_alloc(void)
-{
- struct fsg_dev *fsg;
-
- fsg = kzalloc(sizeof *fsg +
- fsg_num_buffers * sizeof *(fsg->buffhds), GFP_KERNEL);
-
- if (!fsg)
- return -ENOMEM;
- spin_lock_init(&fsg->lock);
- init_rwsem(&fsg->filesem);
- kref_init(&fsg->ref);
- init_completion(&fsg->thread_notifier);
-
- the_fsg = fsg;
- return 0;
-}
-
-
-static int __init fsg_init(void)
-{
- int rc;
- struct fsg_dev *fsg;
-
- rc = fsg_num_buffers_validate();
- if (rc != 0)
- return rc;
-
- if ((rc = fsg_alloc()) != 0)
- return rc;
- fsg = the_fsg;
- rc = usb_gadget_probe_driver(&fsg_driver);
- if (rc != 0)
- kref_put(&fsg->ref, fsg_release);
- return rc;
-}
-module_init(fsg_init);
-
-
-static void __exit fsg_cleanup(void)
-{
- struct fsg_dev *fsg = the_fsg;
-
- /* Unregister the driver iff the thread hasn't already done so */
- if (test_and_clear_bit(REGISTERED, &fsg->atomic_bitflags))
- usb_gadget_unregister_driver(&fsg_driver);
-
- /* Wait for the thread to finish up */
- wait_for_completion(&fsg->thread_notifier);
-
- kref_put(&fsg->ref, fsg_release);
-}
-module_exit(fsg_cleanup);
diff --git a/drivers/usb/gadget/fsl_qe_udc.c b/drivers/usb/gadget/fsl_qe_udc.c
index b09452d..ec50f18 100644
--- a/drivers/usb/gadget/fsl_qe_udc.c
+++ b/drivers/usb/gadget/fsl_qe_udc.c
@@ -2347,7 +2347,7 @@
}
/* udc structure's alloc and setup, include ep-param alloc */
-static struct qe_udc __devinit *qe_udc_config(struct platform_device *ofdev)
+static struct qe_udc *qe_udc_config(struct platform_device *ofdev)
{
struct qe_udc *udc;
struct device_node *np = ofdev->dev.of_node;
@@ -2402,7 +2402,7 @@
}
/* USB Controller register init */
-static int __devinit qe_udc_reg_init(struct qe_udc *udc)
+static int qe_udc_reg_init(struct qe_udc *udc)
{
struct usb_ctlr __iomem *qe_usbregs;
qe_usbregs = udc->usb_regs;
@@ -2420,7 +2420,7 @@
return 0;
}
-static int __devinit qe_ep_config(struct qe_udc *udc, unsigned char pipe_num)
+static int qe_ep_config(struct qe_udc *udc, unsigned char pipe_num)
{
struct qe_ep *ep = &udc->eps[pipe_num];
@@ -2473,7 +2473,7 @@
/* Driver probe functions */
static const struct of_device_id qe_udc_match[];
-static int __devinit qe_udc_probe(struct platform_device *ofdev)
+static int qe_udc_probe(struct platform_device *ofdev)
{
struct qe_udc *udc;
const struct of_device_id *match;
@@ -2651,7 +2651,7 @@
}
#endif
-static int __devexit qe_udc_remove(struct platform_device *ofdev)
+static int qe_udc_remove(struct platform_device *ofdev)
{
struct qe_udc *udc = dev_get_drvdata(&ofdev->dev);
struct qe_ep *ep;
@@ -2710,7 +2710,7 @@
}
/*-------------------------------------------------------------------------*/
-static const struct of_device_id qe_udc_match[] __devinitconst = {
+static const struct of_device_id qe_udc_match[] = {
{
.compatible = "fsl,mpc8323-qe-usb",
.data = (void *)PORT_QE,
@@ -2735,7 +2735,7 @@
.of_match_table = qe_udc_match,
},
.probe = qe_udc_probe,
- .remove = __devexit_p(qe_udc_remove),
+ .remove = qe_udc_remove,
#ifdef CONFIG_PM
.suspend = qe_udc_suspend,
.resume = qe_udc_resume,
diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c
index 6ae70cb..c19f7f1 100644
--- a/drivers/usb/gadget/fsl_udc_core.c
+++ b/drivers/usb/gadget/fsl_udc_core.c
@@ -2126,7 +2126,7 @@
tmp_reg = fsl_readl(&dr_regs->usbintr);
t = scnprintf(next, size,
- "USB Intrrupt Enable Reg:\n"
+ "USB Interrupt Enable Reg:\n"
"Sleep Enable: %d SOF Received Enable: %d "
"Reset Enable: %d\n"
"System Error Enable: %d "
diff --git a/drivers/usb/gadget/hid.c b/drivers/usb/gadget/hid.c
index 74130f6..c36260ea 100644
--- a/drivers/usb/gadget/hid.c
+++ b/drivers/usb/gadget/hid.c
@@ -203,7 +203,7 @@
return 0;
}
-static int __devexit hidg_plat_driver_remove(struct platform_device *pdev)
+static int hidg_plat_driver_remove(struct platform_device *pdev)
{
struct hidg_func_node *e, *n;
@@ -229,7 +229,7 @@
};
static struct platform_driver hidg_plat_driver = {
- .remove = __devexit_p(hidg_plat_driver_remove),
+ .remove = hidg_plat_driver_remove,
.driver = {
.owner = THIS_MODULE,
.name = "hidg",
diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c
index 76494ca..8ac840f 100644
--- a/drivers/usb/gadget/inode.c
+++ b/drivers/usb/gadget/inode.c
@@ -76,7 +76,6 @@
/*----------------------------------------------------------------------*/
#define GADGETFS_MAGIC 0xaee71ee7
-#define DMA_ADDR_INVALID (~(dma_addr_t)0)
/* /dev/gadget/$CHIP represents ep0 and the whole device */
enum ep0_state {
@@ -918,7 +917,6 @@
if (req->buf != dev->rbuf) {
kfree(req->buf);
req->buf = dev->rbuf;
- req->dma = DMA_ADDR_INVALID;
}
req->complete = epio_complete;
dev->setup_out_ready = 0;
@@ -1408,7 +1406,6 @@
dev->setup_abort = 1;
req->buf = dev->rbuf;
- req->dma = DMA_ADDR_INVALID;
req->context = NULL;
value = -EOPNOTSUPP;
switch (ctrl->bRequest) {
diff --git a/drivers/usb/gadget/lpc32xx_udc.c b/drivers/usb/gadget/lpc32xx_udc.c
index 21a9861..dd1c9b1 100644
--- a/drivers/usb/gadget/lpc32xx_udc.c
+++ b/drivers/usb/gadget/lpc32xx_udc.c
@@ -2399,7 +2399,7 @@
if (i < 0) {
/* setup processing failed, force stall */
- dev_err(udc->dev,
+ dev_dbg(udc->dev,
"req %02x.%02x protocol STALL; stat %d\n",
reqtype, req, i);
udc->ep0state = WAIT_FOR_SETUP;
@@ -3352,7 +3352,7 @@
return retval;
}
-static int __devexit lpc32xx_udc_remove(struct platform_device *pdev)
+static int lpc32xx_udc_remove(struct platform_device *pdev)
{
struct lpc32xx_udc *udc = platform_get_drvdata(pdev);
@@ -3447,7 +3447,7 @@
#endif
static struct platform_driver lpc32xx_udc_driver = {
- .remove = __devexit_p(lpc32xx_udc_remove),
+ .remove = lpc32xx_udc_remove,
.shutdown = lpc32xx_udc_shutdown,
.suspend = lpc32xx_udc_suspend,
.resume = lpc32xx_udc_resume,
diff --git a/drivers/usb/gadget/mv_u3d_core.c b/drivers/usb/gadget/mv_u3d_core.c
index 8cfd5b0..b5cea27 100644
--- a/drivers/usb/gadget/mv_u3d_core.c
+++ b/drivers/usb/gadget/mv_u3d_core.c
@@ -1763,7 +1763,7 @@
dev_dbg(dev, "%s\n", __func__);
}
-static __devexit int mv_u3d_remove(struct platform_device *dev)
+static int mv_u3d_remove(struct platform_device *dev)
{
struct mv_u3d *u3d = platform_get_drvdata(dev);
diff --git a/drivers/usb/gadget/mv_udc_core.c b/drivers/usb/gadget/mv_udc_core.c
index ea45224..379aac7 100644
--- a/drivers/usb/gadget/mv_udc_core.c
+++ b/drivers/usb/gadget/mv_udc_core.c
@@ -2128,7 +2128,7 @@
complete(udc->done);
}
-static int __devexit mv_udc_remove(struct platform_device *dev)
+static int mv_udc_remove(struct platform_device *dev)
{
struct mv_udc *udc = the_controller;
int clk_i;
@@ -2188,7 +2188,7 @@
return 0;
}
-static int __devinit mv_udc_probe(struct platform_device *dev)
+static int mv_udc_probe(struct platform_device *dev)
{
struct mv_usb_platform_data *pdata = dev->dev.platform_data;
struct mv_udc *udc;
diff --git a/drivers/usb/gadget/net2272.c b/drivers/usb/gadget/net2272.c
index c009263..d226058 100644
--- a/drivers/usb/gadget/net2272.c
+++ b/drivers/usb/gadget/net2272.c
@@ -2193,7 +2193,7 @@
/*---------------------------------------------------------------------------*/
-static void __devexit
+static void
net2272_remove(struct net2272 *dev)
{
usb_del_gadget_udc(&dev->gadget);
@@ -2215,8 +2215,7 @@
dev_info(dev->dev, "unbind\n");
}
-static struct net2272 * __devinit
-net2272_probe_init(struct device *dev, unsigned int irq)
+static struct net2272 *net2272_probe_init(struct device *dev, unsigned int irq)
{
struct net2272 *ret;
@@ -2246,7 +2245,7 @@
return ret;
}
-static int __devinit
+static int
net2272_probe_fin(struct net2272 *dev, unsigned int irqflags)
{
int ret;
@@ -2306,7 +2305,7 @@
* don't respond over USB until a gadget driver binds to us
*/
-static int __devinit
+static int
net2272_rdk1_probe(struct pci_dev *pdev, struct net2272 *dev)
{
unsigned long resource, len, tmp;
@@ -2389,7 +2388,7 @@
return ret;
}
-static int __devinit
+static int
net2272_rdk2_probe(struct pci_dev *pdev, struct net2272 *dev)
{
unsigned long resource, len;
@@ -2447,7 +2446,7 @@
return ret;
}
-static int __devinit
+static int
net2272_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
{
struct net2272 *dev;
@@ -2489,7 +2488,7 @@
return ret;
}
-static void __devexit
+static void
net2272_rdk1_remove(struct pci_dev *pdev, struct net2272 *dev)
{
int i;
@@ -2511,7 +2510,7 @@
}
}
-static void __devexit
+static void
net2272_rdk2_remove(struct pci_dev *pdev, struct net2272 *dev)
{
int i;
@@ -2530,7 +2529,7 @@
pci_resource_len(pdev, i));
}
-static void __devexit
+static void
net2272_pci_remove(struct pci_dev *pdev)
{
struct net2272 *dev = pci_get_drvdata(pdev);
@@ -2549,7 +2548,7 @@
}
/* Table of matching PCI IDs */
-static struct pci_device_id __devinitdata pci_ids[] = {
+static struct pci_device_id pci_ids[] = {
{ /* RDK 1 card */
.class = ((PCI_CLASS_BRIDGE_OTHER << 8) | 0xfe),
.class_mask = 0,
@@ -2575,7 +2574,7 @@
.id_table = pci_ids,
.probe = net2272_pci_probe,
- .remove = __devexit_p(net2272_pci_remove),
+ .remove = net2272_pci_remove,
};
static int net2272_pci_register(void)
@@ -2595,7 +2594,7 @@
/*---------------------------------------------------------------------------*/
-static int __devinit
+static int
net2272_plat_probe(struct platform_device *pdev)
{
struct net2272 *dev;
@@ -2661,7 +2660,7 @@
return ret;
}
-static int __devexit
+static int
net2272_plat_remove(struct platform_device *pdev)
{
struct net2272 *dev = platform_get_drvdata(pdev);
@@ -2678,7 +2677,7 @@
static struct platform_driver net2272_plat_driver = {
.probe = net2272_plat_probe,
- .remove = __devexit_p(net2272_plat_remove),
+ .remove = net2272_plat_remove,
.driver = {
.name = driver_name,
.owner = THIS_MODULE,
diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c
index ac335af..708c0b5 100644
--- a/drivers/usb/gadget/net2280.c
+++ b/drivers/usb/gadget/net2280.c
@@ -9,7 +9,7 @@
* CODE STATUS HIGHLIGHTS
*
* This driver should work well with most "gadget" drivers, including
- * the File Storage, Serial, and Ethernet/RNDIS gadget drivers
+ * the Mass Storage, Serial, and Ethernet/RNDIS gadget drivers
* as well as Gadget Zero and Gadgetfs.
*
* DMA is enabled by default. Drivers using transfer queues might use
diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c
index 2a4749c..9412bf5 100644
--- a/drivers/usb/gadget/omap_udc.c
+++ b/drivers/usb/gadget/omap_udc.c
@@ -2506,7 +2506,7 @@
* UDC_SYSCON_1.CFG_LOCK is set can now work. We won't use that
* capability yet though.
*/
-static unsigned __devinit
+static unsigned
omap_ep_setup(char *name, u8 addr, u8 type,
unsigned buf, unsigned maxp, int dbuf)
{
@@ -2624,7 +2624,7 @@
udc = NULL;
}
-static int __devinit
+static int
omap_udc_setup(struct platform_device *odev, struct usb_phy *xceiv)
{
unsigned tmp, buf;
@@ -2761,7 +2761,7 @@
return 0;
}
-static int __devinit omap_udc_probe(struct platform_device *pdev)
+static int omap_udc_probe(struct platform_device *pdev)
{
int status = -ENODEV;
int hmc;
@@ -2974,7 +2974,7 @@
return status;
}
-static int __devexit omap_udc_remove(struct platform_device *pdev)
+static int omap_udc_remove(struct platform_device *pdev)
{
DECLARE_COMPLETION_ONSTACK(done);
@@ -3060,7 +3060,7 @@
static struct platform_driver udc_driver = {
.probe = omap_udc_probe,
- .remove = __devexit_p(omap_udc_remove),
+ .remove = omap_udc_remove,
.suspend = omap_udc_suspend,
.resume = omap_udc_resume,
.driver = {
diff --git a/drivers/usb/gadget/printer.c b/drivers/usb/gadget/printer.c
index e156e3f..35bcc83 100644
--- a/drivers/usb/gadget/printer.c
+++ b/drivers/usb/gadget/printer.c
@@ -983,8 +983,10 @@
{
struct printer_dev *dev = container_of(f, struct printer_dev, function);
struct usb_composite_dev *cdev = c->cdev;
- struct usb_ep *in_ep, *out_ep;
+ struct usb_ep *in_ep;
+ struct usb_ep *out_ep = NULL;
int id;
+ int ret;
id = usb_interface_id(c, f);
if (id < 0)
@@ -1010,6 +1012,11 @@
hs_ep_in_desc.bEndpointAddress = fs_ep_in_desc.bEndpointAddress;
hs_ep_out_desc.bEndpointAddress = fs_ep_out_desc.bEndpointAddress;
+ ret = usb_assign_descriptors(f, fs_printer_function,
+ hs_printer_function, NULL);
+ if (ret)
+ return ret;
+
dev->in_ep = in_ep;
dev->out_ep = out_ep;
return 0;
@@ -1018,6 +1025,7 @@
static void printer_func_unbind(struct usb_configuration *c,
struct usb_function *f)
{
+ usb_free_all_descriptors(f);
}
static int printer_func_set_alt(struct usb_function *f,
@@ -1110,8 +1118,6 @@
dev = &usb_printer_gadget;
dev->function.name = shortname;
- dev->function.descriptors = fs_printer_function;
- dev->function.hs_descriptors = hs_printer_function;
dev->function.bind = printer_func_bind;
dev->function.setup = printer_func_setup;
dev->function.unbind = printer_func_unbind;
diff --git a/drivers/usb/gadget/pxa27x_udc.h b/drivers/usb/gadget/pxa27x_udc.h
index a1d268c..79d81a4 100644
--- a/drivers/usb/gadget/pxa27x_udc.h
+++ b/drivers/usb/gadget/pxa27x_udc.h
@@ -418,7 +418,7 @@
* @irq: udc irq
* @clk: udc clock
* @usb_gadget: udc gadget structure
- * @driver: bound gadget (zero, g_ether, g_file_storage, ...)
+ * @driver: bound gadget (zero, g_ether, g_mass_storage, ...)
* @dev: device
* @mach: machine info, used to activate specific GPIO
* @transceiver: external transceiver to handle vbus sense and D+ pullup
diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index 6f696ee..141971d 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -3072,7 +3072,7 @@
* creation) to give to the gadget driver. Setup the endpoint name, any
* direction information and other state that may be required.
*/
-static void __devinit s3c_hsotg_initep(struct s3c_hsotg *hsotg,
+static void s3c_hsotg_initep(struct s3c_hsotg *hsotg,
struct s3c_hsotg_ep *hs_ep,
int epnum)
{
@@ -3414,7 +3414,7 @@
* with the same name as the device itself, in case we end up
* with multiple blocks in future systems.
*/
-static void __devinit s3c_hsotg_create_debug(struct s3c_hsotg *hsotg)
+static void s3c_hsotg_create_debug(struct s3c_hsotg *hsotg)
{
struct dentry *root;
unsigned epidx;
@@ -3460,7 +3460,7 @@
*
* Cleanup (remove) the debugfs files for use on module exit.
*/
-static void __devexit s3c_hsotg_delete_debug(struct s3c_hsotg *hsotg)
+static void s3c_hsotg_delete_debug(struct s3c_hsotg *hsotg)
{
unsigned epidx;
@@ -3490,7 +3490,7 @@
* @pdev: The platform information for the driver
*/
-static int __devinit s3c_hsotg_probe(struct platform_device *pdev)
+static int s3c_hsotg_probe(struct platform_device *pdev)
{
struct s3c_hsotg_plat *plat = pdev->dev.platform_data;
struct device *dev = &pdev->dev;
@@ -3675,7 +3675,7 @@
* s3c_hsotg_remove - remove function for hsotg driver
* @pdev: The platform information for the driver
*/
-static int __devexit s3c_hsotg_remove(struct platform_device *pdev)
+static int s3c_hsotg_remove(struct platform_device *pdev)
{
struct s3c_hsotg *hsotg = platform_get_drvdata(pdev);
@@ -3708,7 +3708,7 @@
.owner = THIS_MODULE,
},
.probe = s3c_hsotg_probe,
- .remove = __devexit_p(s3c_hsotg_remove),
+ .remove = s3c_hsotg_remove,
.suspend = s3c_hsotg_suspend,
.resume = s3c_hsotg_resume,
};
diff --git a/drivers/usb/gadget/s3c-hsudc.c b/drivers/usb/gadget/s3c-hsudc.c
index d8e785d..52379b1 100644
--- a/drivers/usb/gadget/s3c-hsudc.c
+++ b/drivers/usb/gadget/s3c-hsudc.c
@@ -1261,7 +1261,7 @@
.vbus_draw = s3c_hsudc_vbus_draw,
};
-static int __devinit s3c_hsudc_probe(struct platform_device *pdev)
+static int s3c_hsudc_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct resource *res;
diff --git a/drivers/usb/gadget/storage_common.c b/drivers/usb/gadget/storage_common.c
index 8d9bcd8..0e3ae43 100644
--- a/drivers/usb/gadget/storage_common.c
+++ b/drivers/usb/gadget/storage_common.c
@@ -11,30 +11,10 @@
* (at your option) any later version.
*/
-
/*
* This file requires the following identifiers used in USB strings to
* be defined (each of type pointer to char):
- * - fsg_string_manufacturer -- name of the manufacturer
- * - fsg_string_product -- name of the product
- * - fsg_string_config -- name of the configuration
* - fsg_string_interface -- name of the interface
- * The first four are only needed when FSG_DESCRIPTORS_DEVICE_STRINGS
- * macro is defined prior to including this file.
- */
-
-/*
- * When FSG_NO_INTR_EP is defined fsg_fs_intr_in_desc and
- * fsg_hs_intr_in_desc objects as well as
- * FSG_FS_FUNCTION_PRE_EP_ENTRIES and FSG_HS_FUNCTION_PRE_EP_ENTRIES
- * macros are not defined.
- *
- * When FSG_NO_DEVICE_STRINGS is defined FSG_STRING_MANUFACTURER,
- * FSG_STRING_PRODUCT, FSG_STRING_SERIAL and FSG_STRING_CONFIG are not
- * defined (as well as corresponding entries in string tables are
- * missing) and FSG_STRING_INTERFACE has value of zero.
- *
- * When FSG_NO_OTG is defined fsg_otg_desc won't be defined.
*/
/*
@@ -78,34 +58,6 @@
#define LWARN(lun, fmt, args...) dev_warn(&(lun)->dev, fmt, ## args)
#define LINFO(lun, fmt, args...) dev_info(&(lun)->dev, fmt, ## args)
-/*
- * Keep those macros in sync with those in
- * include/linux/usb/composite.h or else GCC will complain. If they
- * are identical (the same names of arguments, white spaces in the
- * same places) GCC will allow redefinition otherwise (even if some
- * white space is removed or added) warning will be issued.
- *
- * Those macros are needed here because File Storage Gadget does not
- * include the composite.h header. For composite gadgets those macros
- * are redundant since composite.h is included any way.
- *
- * One could check whether those macros are already defined (which
- * would indicate composite.h had been included) or not (which would
- * indicate we were in FSG) but this is not done because a warning is
- * desired if definitions here differ from the ones in composite.h.
- *
- * We want the definitions to match and be the same in File Storage
- * Gadget as well as Mass Storage Function (and so composite gadgets
- * using MSF). If someone changes them in composite.h it will produce
- * a warning in this file when building MSF.
- */
-#define DBG(d, fmt, args...) dev_dbg(&(d)->gadget->dev , fmt , ## args)
-#define VDBG(d, fmt, args...) dev_vdbg(&(d)->gadget->dev , fmt , ## args)
-#define ERROR(d, fmt, args...) dev_err(&(d)->gadget->dev , fmt , ## args)
-#define WARNING(d, fmt, args...) dev_warn(&(d)->gadget->dev , fmt , ## args)
-#define INFO(d, fmt, args...) dev_info(&(d)->gadget->dev , fmt , ## args)
-
-
#ifdef DUMP_MSGS
@@ -203,9 +155,12 @@
struct device dev;
};
-#define fsg_lun_is_open(curlun) ((curlun)->filp != NULL)
+static inline bool fsg_lun_is_open(struct fsg_lun *curlun)
+{
+ return curlun->filp != NULL;
+}
-static struct fsg_lun *fsg_lun_from_dev(struct device *dev)
+static inline struct fsg_lun *fsg_lun_from_dev(struct device *dev)
{
return container_of(dev, struct fsg_lun, dev);
}
@@ -308,26 +263,10 @@
enum {
-#ifndef FSG_NO_DEVICE_STRINGS
- FSG_STRING_MANUFACTURER = 1,
- FSG_STRING_PRODUCT,
- FSG_STRING_SERIAL,
- FSG_STRING_CONFIG,
-#endif
FSG_STRING_INTERFACE
};
-#ifndef FSG_NO_OTG
-static struct usb_otg_descriptor
-fsg_otg_desc = {
- .bLength = sizeof fsg_otg_desc,
- .bDescriptorType = USB_DT_OTG,
-
- .bmAttributes = USB_OTG_SRP,
-};
-#endif
-
/* There is only one interface. */
static struct usb_interface_descriptor
@@ -367,37 +306,10 @@
/* wMaxPacketSize set by autoconfiguration */
};
-#ifndef FSG_NO_INTR_EP
-
-static struct usb_endpoint_descriptor
-fsg_fs_intr_in_desc = {
- .bLength = USB_DT_ENDPOINT_SIZE,
- .bDescriptorType = USB_DT_ENDPOINT,
-
- .bEndpointAddress = USB_DIR_IN,
- .bmAttributes = USB_ENDPOINT_XFER_INT,
- .wMaxPacketSize = cpu_to_le16(2),
- .bInterval = 32, /* frames -> 32 ms */
-};
-
-#ifndef FSG_NO_OTG
-# define FSG_FS_FUNCTION_PRE_EP_ENTRIES 2
-#else
-# define FSG_FS_FUNCTION_PRE_EP_ENTRIES 1
-#endif
-
-#endif
-
static struct usb_descriptor_header *fsg_fs_function[] = {
-#ifndef FSG_NO_OTG
- (struct usb_descriptor_header *) &fsg_otg_desc,
-#endif
(struct usb_descriptor_header *) &fsg_intf_desc,
(struct usb_descriptor_header *) &fsg_fs_bulk_in_desc,
(struct usb_descriptor_header *) &fsg_fs_bulk_out_desc,
-#ifndef FSG_NO_INTR_EP
- (struct usb_descriptor_header *) &fsg_fs_intr_in_desc,
-#endif
NULL,
};
@@ -431,37 +343,11 @@
.bInterval = 1, /* NAK every 1 uframe */
};
-#ifndef FSG_NO_INTR_EP
-
-static struct usb_endpoint_descriptor
-fsg_hs_intr_in_desc = {
- .bLength = USB_DT_ENDPOINT_SIZE,
- .bDescriptorType = USB_DT_ENDPOINT,
-
- /* bEndpointAddress copied from fs_intr_in_desc during fsg_bind() */
- .bmAttributes = USB_ENDPOINT_XFER_INT,
- .wMaxPacketSize = cpu_to_le16(2),
- .bInterval = 9, /* 2**(9-1) = 256 uframes -> 32 ms */
-};
-
-#ifndef FSG_NO_OTG
-# define FSG_HS_FUNCTION_PRE_EP_ENTRIES 2
-#else
-# define FSG_HS_FUNCTION_PRE_EP_ENTRIES 1
-#endif
-
-#endif
static struct usb_descriptor_header *fsg_hs_function[] = {
-#ifndef FSG_NO_OTG
- (struct usb_descriptor_header *) &fsg_otg_desc,
-#endif
(struct usb_descriptor_header *) &fsg_intf_desc,
(struct usb_descriptor_header *) &fsg_hs_bulk_in_desc,
(struct usb_descriptor_header *) &fsg_hs_bulk_out_desc,
-#ifndef FSG_NO_INTR_EP
- (struct usb_descriptor_header *) &fsg_hs_intr_in_desc,
-#endif
NULL,
};
@@ -499,34 +385,6 @@
/*.bMaxBurst = DYNAMIC, */
};
-#ifndef FSG_NO_INTR_EP
-
-static struct usb_endpoint_descriptor
-fsg_ss_intr_in_desc = {
- .bLength = USB_DT_ENDPOINT_SIZE,
- .bDescriptorType = USB_DT_ENDPOINT,
-
- /* bEndpointAddress copied from fs_intr_in_desc during fsg_bind() */
- .bmAttributes = USB_ENDPOINT_XFER_INT,
- .wMaxPacketSize = cpu_to_le16(2),
- .bInterval = 9, /* 2**(9-1) = 256 uframes -> 32 ms */
-};
-
-static struct usb_ss_ep_comp_descriptor fsg_ss_intr_in_comp_desc = {
- .bLength = sizeof(fsg_ss_bulk_in_comp_desc),
- .bDescriptorType = USB_DT_SS_ENDPOINT_COMP,
-
- .wBytesPerInterval = cpu_to_le16(2),
-};
-
-#ifndef FSG_NO_OTG
-# define FSG_SS_FUNCTION_PRE_EP_ENTRIES 2
-#else
-# define FSG_SS_FUNCTION_PRE_EP_ENTRIES 1
-#endif
-
-#endif
-
static __maybe_unused struct usb_ext_cap_descriptor fsg_ext_cap_desc = {
.bLength = USB_DT_USB_EXT_CAP_SIZE,
.bDescriptorType = USB_DT_DEVICE_CAPABILITY,
@@ -563,18 +421,11 @@
};
static struct usb_descriptor_header *fsg_ss_function[] = {
-#ifndef FSG_NO_OTG
- (struct usb_descriptor_header *) &fsg_otg_desc,
-#endif
(struct usb_descriptor_header *) &fsg_intf_desc,
(struct usb_descriptor_header *) &fsg_ss_bulk_in_desc,
(struct usb_descriptor_header *) &fsg_ss_bulk_in_comp_desc,
(struct usb_descriptor_header *) &fsg_ss_bulk_out_desc,
(struct usb_descriptor_header *) &fsg_ss_bulk_out_comp_desc,
-#ifndef FSG_NO_INTR_EP
- (struct usb_descriptor_header *) &fsg_ss_intr_in_desc,
- (struct usb_descriptor_header *) &fsg_ss_intr_in_comp_desc,
-#endif
NULL,
};
@@ -594,12 +445,6 @@
/* Static strings, in UTF-8 (for simplicity we use only ASCII characters) */
static struct usb_string fsg_strings[] = {
-#ifndef FSG_NO_DEVICE_STRINGS
- {FSG_STRING_MANUFACTURER, fsg_string_manufacturer},
- {FSG_STRING_PRODUCT, fsg_string_product},
- {FSG_STRING_SERIAL, ""},
- {FSG_STRING_CONFIG, fsg_string_config},
-#endif
{FSG_STRING_INTERFACE, fsg_string_interface},
{}
};
diff --git a/drivers/usb/gadget/tcm_usb_gadget.c b/drivers/usb/gadget/tcm_usb_gadget.c
index 97e68b3..4f7f76f 100644
--- a/drivers/usb/gadget/tcm_usb_gadget.c
+++ b/drivers/usb/gadget/tcm_usb_gadget.c
@@ -1384,7 +1384,7 @@
nacl = kzalloc(sizeof(struct usbg_nacl), GFP_KERNEL);
if (!nacl) {
- printk(KERN_ERR "Unable to alocate struct usbg_nacl\n");
+ printk(KERN_ERR "Unable to allocate struct usbg_nacl\n");
return NULL;
}
@@ -2139,6 +2139,7 @@
(struct usb_descriptor_header *) &uasp_status_pipe_desc,
(struct usb_descriptor_header *) &uasp_fs_cmd_desc,
(struct usb_descriptor_header *) &uasp_cmd_pipe_desc,
+ NULL,
};
static struct usb_descriptor_header *uasp_hs_function_desc[] = {
@@ -2239,6 +2240,7 @@
struct usb_gadget *gadget = c->cdev->gadget;
struct usb_ep *ep;
int iface;
+ int ret;
iface = usb_interface_id(c, f);
if (iface < 0)
@@ -2289,6 +2291,11 @@
uasp_ss_status_desc.bEndpointAddress;
uasp_fs_cmd_desc.bEndpointAddress = uasp_ss_cmd_desc.bEndpointAddress;
+ ret = usb_assign_descriptors(f, uasp_fs_function_desc,
+ uasp_hs_function_desc, uasp_ss_function_desc);
+ if (ret)
+ goto ep_fail;
+
return 0;
ep_fail:
pr_err("Can't claim all required eps\n");
@@ -2304,6 +2311,7 @@
{
struct f_uas *fu = to_f_uas(f);
+ usb_free_all_descriptors(f);
kfree(fu);
}
@@ -2384,9 +2392,6 @@
if (!fu)
return -ENOMEM;
fu->function.name = "Target Function";
- fu->function.descriptors = uasp_fs_function_desc;
- fu->function.hs_descriptors = uasp_hs_function_desc;
- fu->function.ss_descriptors = uasp_ss_function_desc;
fu->function.bind = usbg_bind;
fu->function.unbind = usbg_unbind;
fu->function.set_alt = usbg_set_alt;
diff --git a/drivers/usb/gadget/u_serial.c b/drivers/usb/gadget/u_serial.c
index f173952..d0f9548 100644
--- a/drivers/usb/gadget/u_serial.c
+++ b/drivers/usb/gadget/u_serial.c
@@ -1145,8 +1145,10 @@
return status;
fail:
- while (count--)
+ while (count--) {
+ tty_port_destroy(&ports[count].port->port);
kfree(ports[count].port);
+ }
put_tty_driver(gs_tty_driver);
gs_tty_driver = NULL;
return status;
@@ -1200,6 +1202,7 @@
WARN_ON(port->port_usb != NULL);
+ tty_port_destroy(&port->port);
kfree(port);
}
n_ports = 0;
diff --git a/drivers/usb/gadget/udc-core.c b/drivers/usb/gadget/udc-core.c
index f3cd969..4d90a80 100644
--- a/drivers/usb/gadget/udc-core.c
+++ b/drivers/usb/gadget/udc-core.c
@@ -439,16 +439,6 @@
static USB_UDC_SPEED_ATTR(current_speed, speed);
static USB_UDC_SPEED_ATTR(maximum_speed, max_speed);
-/* TODO: Scheduled for removal in 3.8. */
-static ssize_t usb_udc_is_dualspeed_show(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct usb_udc *udc = container_of(dev, struct usb_udc, dev);
- return snprintf(buf, PAGE_SIZE, "%d\n",
- gadget_is_dualspeed(udc->gadget));
-}
-static DEVICE_ATTR(is_dualspeed, S_IRUSR, usb_udc_is_dualspeed_show, NULL);
-
#define USB_UDC_ATTR(name) \
ssize_t usb_udc_##name##_show(struct device *dev, \
struct device_attribute *attr, char *buf) \
@@ -472,7 +462,6 @@
&dev_attr_current_speed.attr,
&dev_attr_maximum_speed.attr,
- &dev_attr_is_dualspeed.attr,
&dev_attr_is_otg.attr,
&dev_attr_is_a_peripheral.attr,
&dev_attr_b_hnp_enable.attr,
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 3f1431d..d6bb128 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -95,6 +95,11 @@
If unsure, say Y.
+config USB_EHCI_PCI
+ tristate
+ depends on USB_EHCI_HCD && PCI
+ default y
+
config USB_EHCI_HCD_PMC_MSP
tristate "EHCI support for on-chip PMC MSP71xx USB controller"
depends on USB_EHCI_HCD && MSP_HAS_USB
@@ -215,9 +220,13 @@
Enables support for the W90X900 USB controller
config USB_CNS3XXX_EHCI
- bool "Cavium CNS3XXX EHCI Module"
+ bool "Cavium CNS3XXX EHCI Module (DEPRECATED)"
depends on USB_EHCI_HCD && ARCH_CNS3XXX
+ select USB_EHCI_HCD_PLATFORM
---help---
+ This option is deprecated now and the driver was removed, use
+ USB_EHCI_HCD_PLATFORM instead.
+
Enable support for the CNS3XXX SOC's on-chip EHCI controller.
It is needed for high-speed (480Mbit/sec) USB 2.0 device
support.
@@ -333,16 +342,6 @@
Enables support for the built-in OHCI controller present on the
Atheros AR71XX/AR7240 SoCs.
-config USB_OHCI_HCD_PPC_SOC
- bool "OHCI support for on-chip PPC USB controller"
- depends on USB_OHCI_HCD && (STB03xxx || PPC_MPC52xx)
- default y
- select USB_OHCI_BIG_ENDIAN_DESC
- select USB_OHCI_BIG_ENDIAN_MMIO
- ---help---
- Enables support for the USB controller on the MPC52xx or
- STB03xxx processor chip. If unsure, say Y.
-
config USB_OHCI_HCD_PPC_OF_BE
bool "OHCI support for OF platform bus (big endian)"
depends on USB_OHCI_HCD && PPC_OF
@@ -393,9 +392,13 @@
If unsure, say N.
config USB_OHCI_SH
- bool "OHCI support for SuperH USB controller"
+ bool "OHCI support for SuperH USB controller (DEPRECATED)"
depends on USB_OHCI_HCD && SUPERH
+ select USB_OHCI_HCD_PLATFORM
---help---
+ This option is deprecated now and the driver was removed, use
+ USB_OHCI_HCD_PLATFORM instead.
+
Enables support for the on-chip OHCI controller on the SuperH.
If you use the PCI OHCI controller, this option is not necessary.
@@ -406,9 +409,13 @@
Enable support for the Samsung Exynos SOC's on-chip OHCI controller.
config USB_CNS3XXX_OHCI
- bool "Cavium CNS3XXX OHCI Module"
+ bool "Cavium CNS3XXX OHCI Module (DEPRECATED)"
depends on USB_OHCI_HCD && ARCH_CNS3XXX
+ select USB_OHCI_HCD_PLATFORM
---help---
+ This option is deprecated now and the driver was removed, use
+ USB_OHCI_HCD_PLATFORM instead.
+
Enable support for the CNS3XXX SOC's on-chip OHCI controller.
It is needed for low-speed USB 1.0 device support.
@@ -423,7 +430,7 @@
If unsure, say N.
config USB_EHCI_HCD_PLATFORM
- bool "Generic EHCI driver for a platform device"
+ tristate "Generic EHCI driver for a platform device"
depends on USB_EHCI_HCD
default n
---help---
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index 9e0a89c..1eb4c30 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -24,6 +24,9 @@
obj-$(CONFIG_PCI) += pci-quirks.o
obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o
+obj-$(CONFIG_USB_EHCI_PCI) += ehci-pci.o
+obj-$(CONFIG_USB_EHCI_HCD_PLATFORM) += ehci-platform.o
+
obj-$(CONFIG_USB_OXU210HP_HCD) += oxu210hp-hcd.o
obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o
obj-$(CONFIG_USB_ISP1362_HCD) += isp1362-hcd.o
@@ -40,6 +43,5 @@
obj-$(CONFIG_USB_IMX21_HCD) += imx21-hcd.o
obj-$(CONFIG_USB_FSL_MPH_DR_OF) += fsl-mph-dr-of.o
obj-$(CONFIG_USB_OCTEON2_COMMON) += octeon2-common.o
-obj-$(CONFIG_MIPS_ALCHEMY) += alchemy-common.o
obj-$(CONFIG_USB_HCD_BCMA) += bcma-hcd.o
obj-$(CONFIG_USB_HCD_SSB) += ssb-hcd.o
diff --git a/drivers/usb/host/bcma-hcd.c b/drivers/usb/host/bcma-hcd.c
index 443da21..df13d42 100644
--- a/drivers/usb/host/bcma-hcd.c
+++ b/drivers/usb/host/bcma-hcd.c
@@ -54,7 +54,7 @@
return -ETIMEDOUT;
}
-static void __devinit bcma_hcd_4716wa(struct bcma_device *dev)
+static void bcma_hcd_4716wa(struct bcma_device *dev)
{
#ifdef CONFIG_BCMA_DRIVER_MIPS
/* Work around for 4716 failures. */
@@ -88,7 +88,7 @@
}
/* based on arch/mips/brcm-boards/bcm947xx/pcibios.c */
-static void __devinit bcma_hcd_init_chip(struct bcma_device *dev)
+static void bcma_hcd_init_chip(struct bcma_device *dev)
{
u32 tmp;
@@ -165,8 +165,7 @@
static const struct usb_ohci_pdata ohci_pdata = {
};
-static struct platform_device * __devinit
-bcma_hcd_create_pdev(struct bcma_device *dev, bool ohci, u32 addr)
+static struct platform_device *bcma_hcd_create_pdev(struct bcma_device *dev, bool ohci, u32 addr)
{
struct platform_device *hci_dev;
struct resource hci_res[2];
@@ -212,7 +211,7 @@
return ERR_PTR(ret);
}
-static int __devinit bcma_hcd_probe(struct bcma_device *dev)
+static int bcma_hcd_probe(struct bcma_device *dev)
{
int err;
u16 chipid_top;
@@ -266,7 +265,7 @@
return err;
}
-static void __devexit bcma_hcd_remove(struct bcma_device *dev)
+static void bcma_hcd_remove(struct bcma_device *dev)
{
struct bcma_hcd_device *usb_dev = bcma_get_drvdata(dev);
struct platform_device *ohci_dev = usb_dev->ohci_dev;
@@ -306,7 +305,7 @@
#define bcma_hcd_resume NULL
#endif /* CONFIG_PM */
-static const struct bcma_device_id bcma_hcd_table[] __devinitconst = {
+static const struct bcma_device_id bcma_hcd_table[] = {
BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_USB20_HOST, BCMA_ANY_REV, BCMA_ANY_CLASS),
BCMA_CORETABLE_END
};
@@ -316,7 +315,7 @@
.name = KBUILD_MODNAME,
.id_table = bcma_hcd_table,
.probe = bcma_hcd_probe,
- .remove = __devexit_p(bcma_hcd_remove),
+ .remove = bcma_hcd_remove,
.shutdown = bcma_hcd_shutdown,
.suspend = bcma_hcd_suspend,
.resume = bcma_hcd_resume,
diff --git a/drivers/usb/host/ehci-atmel.c b/drivers/usb/host/ehci-atmel.c
index 411bb74..27639487 100644
--- a/drivers/usb/host/ehci-atmel.c
+++ b/drivers/usb/host/ehci-atmel.c
@@ -53,18 +53,11 @@
static int ehci_atmel_setup(struct usb_hcd *hcd)
{
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
- int retval;
/* registers start at offset 0x0 */
ehci->caps = hcd->regs;
- retval = ehci_setup(hcd);
- if (retval)
- return retval;
-
- ehci_port_power(ehci, 0);
-
- return retval;
+ return ehci_setup(hcd);
}
static const struct hc_driver ehci_atmel_hc_driver = {
@@ -104,7 +97,7 @@
static u64 at91_ehci_dma_mask = DMA_BIT_MASK(32);
-static int __devinit ehci_atmel_drv_probe(struct platform_device *pdev)
+static int ehci_atmel_drv_probe(struct platform_device *pdev)
{
struct usb_hcd *hcd;
const struct hc_driver *driver = &ehci_atmel_hc_driver;
@@ -189,7 +182,7 @@
return retval;
}
-static int __devexit ehci_atmel_drv_remove(struct platform_device *pdev)
+static int ehci_atmel_drv_remove(struct platform_device *pdev)
{
struct usb_hcd *hcd = platform_get_drvdata(pdev);
@@ -214,7 +207,7 @@
static struct platform_driver ehci_atmel_driver = {
.probe = ehci_atmel_drv_probe,
- .remove = __devexit_p(ehci_atmel_drv_remove),
+ .remove = ehci_atmel_drv_remove,
.shutdown = usb_hcd_platform_shutdown,
.driver = {
.name = "atmel-ehci",
diff --git a/drivers/usb/host/ehci-au1xxx.c b/drivers/usb/host/ehci-au1xxx.c
deleted file mode 100644
index 65c945e..0000000
--- a/drivers/usb/host/ehci-au1xxx.c
+++ /dev/null
@@ -1,184 +0,0 @@
-/*
- * EHCI HCD (Host Controller Driver) for USB.
- *
- * Bus Glue for AMD Alchemy Au1xxx
- *
- * Based on "ohci-au1xxx.c" by Matt Porter <mporter@kernel.crashing.org>
- *
- * Modified for AMD Alchemy Au1200 EHC
- * by K.Boge <karsten.boge@amd.com>
- *
- * This file is licenced under the GPL.
- */
-
-#include <linux/platform_device.h>
-#include <asm/mach-au1x00/au1000.h>
-
-
-extern int usb_disabled(void);
-
-static int au1xxx_ehci_setup(struct usb_hcd *hcd)
-{
- struct ehci_hcd *ehci = hcd_to_ehci(hcd);
- int ret;
-
- ehci->caps = hcd->regs;
- ret = ehci_setup(hcd);
-
- ehci->need_io_watchdog = 0;
- return ret;
-}
-
-static const struct hc_driver ehci_au1xxx_hc_driver = {
- .description = hcd_name,
- .product_desc = "Au1xxx EHCI",
- .hcd_priv_size = sizeof(struct ehci_hcd),
-
- /*
- * generic hardware linkage
- */
- .irq = ehci_irq,
- .flags = HCD_MEMORY | HCD_USB2,
-
- /*
- * basic lifecycle operations
- *
- * FIXME -- ehci_init() doesn't do enough here.
- * See ehci-ppc-soc for a complete implementation.
- */
- .reset = au1xxx_ehci_setup,
- .start = ehci_run,
- .stop = ehci_stop,
- .shutdown = ehci_shutdown,
-
- /*
- * managing i/o requests and associated device resources
- */
- .urb_enqueue = ehci_urb_enqueue,
- .urb_dequeue = ehci_urb_dequeue,
- .endpoint_disable = ehci_endpoint_disable,
- .endpoint_reset = ehci_endpoint_reset,
-
- /*
- * scheduling support
- */
- .get_frame_number = ehci_get_frame,
-
- /*
- * root hub support
- */
- .hub_status_data = ehci_hub_status_data,
- .hub_control = ehci_hub_control,
- .bus_suspend = ehci_bus_suspend,
- .bus_resume = ehci_bus_resume,
- .relinquish_port = ehci_relinquish_port,
- .port_handed_over = ehci_port_handed_over,
-
- .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
-};
-
-static int ehci_hcd_au1xxx_drv_probe(struct platform_device *pdev)
-{
- struct usb_hcd *hcd;
- struct resource *res;
- int ret;
-
- if (usb_disabled())
- return -ENODEV;
-
- if (pdev->resource[1].flags != IORESOURCE_IRQ) {
- pr_debug("resource[1] is not IORESOURCE_IRQ");
- return -ENOMEM;
- }
- hcd = usb_create_hcd(&ehci_au1xxx_hc_driver, &pdev->dev, "Au1xxx");
- if (!hcd)
- return -ENOMEM;
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- hcd->rsrc_start = res->start;
- hcd->rsrc_len = resource_size(res);
-
- hcd->regs = devm_request_and_ioremap(&pdev->dev, res);
- if (!hcd->regs) {
- pr_debug("devm_request_and_ioremap failed");
- ret = -ENOMEM;
- goto err1;
- }
-
- if (alchemy_usb_control(ALCHEMY_USB_EHCI0, 1)) {
- printk(KERN_INFO "%s: controller init failed!\n", pdev->name);
- ret = -ENODEV;
- goto err1;
- }
-
- ret = usb_add_hcd(hcd, pdev->resource[1].start,
- IRQF_SHARED);
- if (ret == 0) {
- platform_set_drvdata(pdev, hcd);
- return ret;
- }
-
- alchemy_usb_control(ALCHEMY_USB_EHCI0, 0);
-err1:
- usb_put_hcd(hcd);
- return ret;
-}
-
-static int ehci_hcd_au1xxx_drv_remove(struct platform_device *pdev)
-{
- struct usb_hcd *hcd = platform_get_drvdata(pdev);
-
- usb_remove_hcd(hcd);
- alchemy_usb_control(ALCHEMY_USB_EHCI0, 0);
- usb_put_hcd(hcd);
- platform_set_drvdata(pdev, NULL);
-
- return 0;
-}
-
-#ifdef CONFIG_PM
-static int ehci_hcd_au1xxx_drv_suspend(struct device *dev)
-{
- struct usb_hcd *hcd = dev_get_drvdata(dev);
- bool do_wakeup = device_may_wakeup(dev);
- int rc;
-
- rc = ehci_suspend(hcd, do_wakeup);
- alchemy_usb_control(ALCHEMY_USB_EHCI0, 0);
-
- return rc;
-}
-
-static int ehci_hcd_au1xxx_drv_resume(struct device *dev)
-{
- struct usb_hcd *hcd = dev_get_drvdata(dev);
-
- alchemy_usb_control(ALCHEMY_USB_EHCI0, 1);
- ehci_resume(hcd, false);
-
- return 0;
-}
-
-static const struct dev_pm_ops au1xxx_ehci_pmops = {
- .suspend = ehci_hcd_au1xxx_drv_suspend,
- .resume = ehci_hcd_au1xxx_drv_resume,
-};
-
-#define AU1XXX_EHCI_PMOPS &au1xxx_ehci_pmops
-
-#else
-#define AU1XXX_EHCI_PMOPS NULL
-#endif
-
-static struct platform_driver ehci_hcd_au1xxx_driver = {
- .probe = ehci_hcd_au1xxx_drv_probe,
- .remove = ehci_hcd_au1xxx_drv_remove,
- .shutdown = usb_hcd_platform_shutdown,
- .driver = {
- .name = "au1xxx-ehci",
- .owner = THIS_MODULE,
- .pm = AU1XXX_EHCI_PMOPS,
- }
-};
-
-MODULE_ALIAS("platform:au1xxx-ehci");
diff --git a/drivers/usb/host/ehci-cns3xxx.c b/drivers/usb/host/ehci-cns3xxx.c
deleted file mode 100644
index d91708d..0000000
--- a/drivers/usb/host/ehci-cns3xxx.c
+++ /dev/null
@@ -1,155 +0,0 @@
-/*
- * Copyright 2008 Cavium Networks
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License, Version 2, as
- * published by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/atomic.h>
-#include <mach/cns3xxx.h>
-#include <mach/pm.h>
-
-static int cns3xxx_ehci_init(struct usb_hcd *hcd)
-{
- struct ehci_hcd *ehci = hcd_to_ehci(hcd);
- int retval;
-
- /*
- * EHCI and OHCI share the same clock and power,
- * resetting twice would cause the 1st controller been reset.
- * Therefore only do power up at the first up device, and
- * power down at the last down device.
- *
- * Set USB AHB INCR length to 16
- */
- if (atomic_inc_return(&usb_pwr_ref) == 1) {
- cns3xxx_pwr_power_up(1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_USB);
- cns3xxx_pwr_clk_en(1 << PM_CLK_GATE_REG_OFFSET_USB_HOST);
- cns3xxx_pwr_soft_rst(1 << PM_SOFT_RST_REG_OFFST_USB_HOST);
- __raw_writel((__raw_readl(MISC_CHIP_CONFIG_REG) | (0X2 << 24)),
- MISC_CHIP_CONFIG_REG);
- }
-
- ehci->caps = hcd->regs;
-
- hcd->has_tt = 0;
-
- retval = ehci_setup(hcd);
- if (retval)
- return retval;
-
- ehci_port_power(ehci, 0);
-
- return retval;
-}
-
-static const struct hc_driver cns3xxx_ehci_hc_driver = {
- .description = hcd_name,
- .product_desc = "CNS3XXX EHCI Host Controller",
- .hcd_priv_size = sizeof(struct ehci_hcd),
- .irq = ehci_irq,
- .flags = HCD_MEMORY | HCD_USB2,
- .reset = cns3xxx_ehci_init,
- .start = ehci_run,
- .stop = ehci_stop,
- .shutdown = ehci_shutdown,
- .urb_enqueue = ehci_urb_enqueue,
- .urb_dequeue = ehci_urb_dequeue,
- .endpoint_disable = ehci_endpoint_disable,
- .endpoint_reset = ehci_endpoint_reset,
- .get_frame_number = ehci_get_frame,
- .hub_status_data = ehci_hub_status_data,
- .hub_control = ehci_hub_control,
-#ifdef CONFIG_PM
- .bus_suspend = ehci_bus_suspend,
- .bus_resume = ehci_bus_resume,
-#endif
- .relinquish_port = ehci_relinquish_port,
- .port_handed_over = ehci_port_handed_over,
-
- .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
-};
-
-static int cns3xxx_ehci_probe(struct platform_device *pdev)
-{
- struct device *dev = &pdev->dev;
- struct usb_hcd *hcd;
- const struct hc_driver *driver = &cns3xxx_ehci_hc_driver;
- struct resource *res;
- int irq;
- int retval;
-
- if (usb_disabled())
- return -ENODEV;
-
- res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
- if (!res) {
- dev_err(dev, "Found HC with no IRQ.\n");
- return -ENODEV;
- }
- irq = res->start;
-
- hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
- if (!hcd)
- return -ENOMEM;
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- dev_err(dev, "Found HC with no register addr.\n");
- retval = -ENODEV;
- goto err1;
- }
-
- hcd->rsrc_start = res->start;
- hcd->rsrc_len = resource_size(res);
-
- hcd->regs = devm_request_and_ioremap(&pdev->dev, res);
- if (hcd->regs == NULL) {
- dev_dbg(dev, "error mapping memory\n");
- retval = -EFAULT;
- goto err1;
- }
-
- retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
- if (retval == 0)
- return retval;
-
-err1:
- usb_put_hcd(hcd);
-
- return retval;
-}
-
-static int cns3xxx_ehci_remove(struct platform_device *pdev)
-{
- struct usb_hcd *hcd = platform_get_drvdata(pdev);
-
- usb_remove_hcd(hcd);
-
- /*
- * EHCI and OHCI share the same clock and power,
- * resetting twice would cause the 1st controller been reset.
- * Therefore only do power up at the first up device, and
- * power down at the last down device.
- */
- if (atomic_dec_return(&usb_pwr_ref) == 0)
- cns3xxx_pwr_clk_dis(1 << PM_CLK_GATE_REG_OFFSET_USB_HOST);
-
- usb_put_hcd(hcd);
-
- platform_set_drvdata(pdev, NULL);
-
- return 0;
-}
-
-MODULE_ALIAS("platform:cns3xxx-ehci");
-
-static struct platform_driver cns3xxx_ehci_driver = {
- .probe = cns3xxx_ehci_probe,
- .remove = cns3xxx_ehci_remove,
- .driver = {
- .name = "cns3xxx-ehci",
- },
-};
diff --git a/drivers/usb/host/ehci-dbg.c b/drivers/usb/host/ehci-dbg.c
index 1599806..70b496d 100644
--- a/drivers/usb/host/ehci-dbg.c
+++ b/drivers/usb/host/ehci-dbg.c
@@ -18,21 +18,6 @@
/* this file is part of ehci-hcd.c */
-#define ehci_dbg(ehci, fmt, args...) \
- dev_dbg (ehci_to_hcd(ehci)->self.controller , fmt , ## args )
-#define ehci_err(ehci, fmt, args...) \
- dev_err (ehci_to_hcd(ehci)->self.controller , fmt , ## args )
-#define ehci_info(ehci, fmt, args...) \
- dev_info (ehci_to_hcd(ehci)->self.controller , fmt , ## args )
-#define ehci_warn(ehci, fmt, args...) \
- dev_warn (ehci_to_hcd(ehci)->self.controller , fmt , ## args )
-
-#ifdef VERBOSE_DEBUG
-# define ehci_vdbg ehci_dbg
-#else
- static inline void ehci_vdbg(struct ehci_hcd *ehci, ...) {}
-#endif
-
#ifdef DEBUG
/* check the values in the HCSPARAMS register
@@ -352,11 +337,6 @@
static int debug_periodic_open(struct inode *, struct file *);
static int debug_registers_open(struct inode *, struct file *);
static int debug_async_open(struct inode *, struct file *);
-static ssize_t debug_lpm_read(struct file *file, char __user *user_buf,
- size_t count, loff_t *ppos);
-static ssize_t debug_lpm_write(struct file *file, const char __user *buffer,
- size_t count, loff_t *ppos);
-static int debug_lpm_close(struct inode *inode, struct file *file);
static ssize_t debug_output(struct file*, char __user*, size_t, loff_t*);
static int debug_close(struct inode *, struct file *);
@@ -382,14 +362,6 @@
.release = debug_close,
.llseek = default_llseek,
};
-static const struct file_operations debug_lpm_fops = {
- .owner = THIS_MODULE,
- .open = simple_open,
- .read = debug_lpm_read,
- .write = debug_lpm_write,
- .release = debug_lpm_close,
- .llseek = noop_llseek,
-};
static struct dentry *ehci_debug_root;
@@ -971,86 +943,6 @@
return file->private_data ? 0 : -ENOMEM;
}
-static int debug_lpm_close(struct inode *inode, struct file *file)
-{
- return 0;
-}
-
-static ssize_t debug_lpm_read(struct file *file, char __user *user_buf,
- size_t count, loff_t *ppos)
-{
- /* TODO: show lpm stats */
- return 0;
-}
-
-static ssize_t debug_lpm_write(struct file *file, const char __user *user_buf,
- size_t count, loff_t *ppos)
-{
- struct usb_hcd *hcd;
- struct ehci_hcd *ehci;
- char buf[50];
- size_t len;
- u32 temp;
- unsigned long port;
- u32 __iomem *portsc ;
- u32 params;
-
- hcd = bus_to_hcd(file->private_data);
- ehci = hcd_to_ehci(hcd);
-
- len = min(count, sizeof(buf) - 1);
- if (copy_from_user(buf, user_buf, len))
- return -EFAULT;
- buf[len] = '\0';
- if (len > 0 && buf[len - 1] == '\n')
- buf[len - 1] = '\0';
-
- if (strncmp(buf, "enable", 5) == 0) {
- if (strict_strtoul(buf + 7, 10, &port))
- return -EINVAL;
- params = ehci_readl(ehci, &ehci->caps->hcs_params);
- if (port > HCS_N_PORTS(params)) {
- ehci_dbg(ehci, "ERR: LPM on bad port %lu\n", port);
- return -ENODEV;
- }
- portsc = &ehci->regs->port_status[port-1];
- temp = ehci_readl(ehci, portsc);
- if (!(temp & PORT_DEV_ADDR)) {
- ehci_dbg(ehci, "LPM: no device attached\n");
- return -ENODEV;
- }
- temp |= PORT_LPM;
- ehci_writel(ehci, temp, portsc);
- printk(KERN_INFO "force enable LPM for port %lu\n", port);
- } else if (strncmp(buf, "hird=", 5) == 0) {
- unsigned long hird;
- if (strict_strtoul(buf + 5, 16, &hird))
- return -EINVAL;
- printk(KERN_INFO "setting hird %s %lu\n", buf + 6, hird);
- ehci->command = (ehci->command & ~CMD_HIRD) | (hird << 24);
- ehci_writel(ehci, ehci->command, &ehci->regs->command);
- } else if (strncmp(buf, "disable", 7) == 0) {
- if (strict_strtoul(buf + 8, 10, &port))
- return -EINVAL;
- params = ehci_readl(ehci, &ehci->caps->hcs_params);
- if (port > HCS_N_PORTS(params)) {
- ehci_dbg(ehci, "ERR: LPM off bad port %lu\n", port);
- return -ENODEV;
- }
- portsc = &ehci->regs->port_status[port-1];
- temp = ehci_readl(ehci, portsc);
- if (!(temp & PORT_DEV_ADDR)) {
- ehci_dbg(ehci, "ERR: no device attached\n");
- return -ENODEV;
- }
- temp &= ~PORT_LPM;
- ehci_writel(ehci, temp, portsc);
- printk(KERN_INFO "disabled LPM for port %lu\n", port);
- } else
- return -EOPNOTSUPP;
- return count;
-}
-
static inline void create_debug_files (struct ehci_hcd *ehci)
{
struct usb_bus *bus = &ehci_to_hcd(ehci)->self;
@@ -1071,10 +963,6 @@
&debug_registers_fops))
goto file_error;
- if (!debugfs_create_file("lpm", S_IRUGO|S_IWUSR, ehci->debug_dir, bus,
- &debug_lpm_fops))
- goto file_error;
-
return;
file_error:
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index 0d2f35c..fd9b542 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -349,7 +349,6 @@
{
if (ehci_fsl_usb_setup(ehci))
return -EINVAL;
- ehci_port_power(ehci, 0);
return 0;
}
diff --git a/drivers/usb/host/ehci-grlib.c b/drivers/usb/host/ehci-grlib.c
index 3180cb3..1fc8929 100644
--- a/drivers/usb/host/ehci-grlib.c
+++ b/drivers/usb/host/ehci-grlib.c
@@ -34,22 +34,6 @@
#define GRUSBHC_HCIVERSION 0x0100 /* Known value of cap. reg. HCIVERSION */
-/* called during probe() after chip reset completes */
-static int ehci_grlib_setup(struct usb_hcd *hcd)
-{
- struct ehci_hcd *ehci = hcd_to_ehci(hcd);
- int retval;
-
- retval = ehci_setup(hcd);
- if (retval)
- return retval;
-
- ehci_port_power(ehci, 1);
-
- return retval;
-}
-
-
static const struct hc_driver ehci_grlib_hc_driver = {
.description = hcd_name,
.product_desc = "GRLIB GRUSBHC EHCI",
@@ -64,7 +48,7 @@
/*
* basic lifecycle operations
*/
- .reset = ehci_grlib_setup,
+ .reset = ehci_setup,
.start = ehci_run,
.stop = ehci_stop,
.shutdown = ehci_shutdown,
@@ -98,7 +82,7 @@
};
-static int __devinit ehci_hcd_grlib_probe(struct platform_device *op)
+static int ehci_hcd_grlib_probe(struct platform_device *op)
{
struct device_node *dn = op->dev.of_node;
struct usb_hcd *hcd;
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 6bf6c42..c97503b 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -39,7 +39,6 @@
#include <linux/dma-mapping.h>
#include <linux/debugfs.h>
#include <linux/slab.h>
-#include <linux/uaccess.h>
#include <asm/byteorder.h>
#include <asm/io.h>
@@ -108,19 +107,39 @@
module_param (ignore_oc, bool, S_IRUGO);
MODULE_PARM_DESC (ignore_oc, "ignore bogus hardware overcurrent indications");
-/* for link power management(LPM) feature */
-static unsigned int hird;
-module_param(hird, int, S_IRUGO);
-MODULE_PARM_DESC(hird, "host initiated resume duration, +1 for each 75us");
-
#define INTR_MASK (STS_IAA | STS_FATAL | STS_PCD | STS_ERR | STS_INT)
/*-------------------------------------------------------------------------*/
#include "ehci.h"
-#include "ehci-dbg.c"
#include "pci-quirks.h"
+/*
+ * The MosChip MCS9990 controller updates its microframe counter
+ * a little before the frame counter, and occasionally we will read
+ * the invalid intermediate value. Avoid problems by checking the
+ * microframe number (the low-order 3 bits); if they are 0 then
+ * re-read the register to get the correct value.
+ */
+static unsigned ehci_moschip_read_frame_index(struct ehci_hcd *ehci)
+{
+ unsigned uf;
+
+ uf = ehci_readl(ehci, &ehci->regs->frame_index);
+ if (unlikely((uf & 7) == 0))
+ uf = ehci_readl(ehci, &ehci->regs->frame_index);
+ return uf;
+}
+
+static inline unsigned ehci_read_frame_index(struct ehci_hcd *ehci)
+{
+ if (ehci->frame_index_bug)
+ return ehci_moschip_read_frame_index(ehci);
+ return ehci_readl(ehci, &ehci->regs->frame_index);
+}
+
+#include "ehci-dbg.c"
+
/*-------------------------------------------------------------------------*/
/*
@@ -293,7 +312,6 @@
#include "ehci-timer.c"
#include "ehci-hub.c"
-#include "ehci-lpm.c"
#include "ehci-mem.c"
#include "ehci-q.c"
#include "ehci-sched.c"
@@ -353,24 +371,6 @@
hrtimer_cancel(&ehci->hrtimer);
}
-static void ehci_port_power (struct ehci_hcd *ehci, int is_on)
-{
- unsigned port;
-
- if (!HCS_PPC (ehci->hcs_params))
- return;
-
- ehci_dbg (ehci, "...power%s ports...\n", is_on ? "up" : "down");
- for (port = HCS_N_PORTS (ehci->hcs_params); port > 0; )
- (void) ehci_hub_control(ehci_to_hcd(ehci),
- is_on ? SetPortFeature : ClearPortFeature,
- USB_PORT_FEAT_POWER,
- port--, NULL, 0);
- /* Flush those writes */
- ehci_readl(ehci, &ehci->regs->command);
- msleep(20);
-}
-
/*-------------------------------------------------------------------------*/
/*
@@ -503,7 +503,7 @@
/* controllers may cache some of the periodic schedule ... */
if (HCC_ISOC_CACHE(hcc_params)) // full frame cache
- ehci->i_thresh = 2 + 8;
+ ehci->i_thresh = 0;
else // N microframes cached
ehci->i_thresh = 2 + HCC_ISOC_THRES(hcc_params);
@@ -555,17 +555,6 @@
temp &= ~(3 << 2);
temp |= (EHCI_TUNE_FLS << 2);
}
- if (HCC_LPM(hcc_params)) {
- /* support link power management EHCI 1.1 addendum */
- ehci_dbg(ehci, "support lpm\n");
- ehci->has_lpm = 1;
- if (hird > 0xf) {
- ehci_dbg(ehci, "hird %d invalid, use default 0",
- hird);
- hird = 0;
- }
- temp |= hird << 24;
- }
ehci->command = temp;
/* Accept arbitrarily long scatter-gather lists */
@@ -660,7 +649,7 @@
return 0;
}
-static int ehci_setup(struct usb_hcd *hcd)
+int ehci_setup(struct usb_hcd *hcd)
{
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
int retval;
@@ -691,6 +680,7 @@
return 0;
}
+EXPORT_SYMBOL_GPL(ehci_setup);
/*-------------------------------------------------------------------------*/
@@ -1096,7 +1086,7 @@
/* These routines handle the generic parts of controller suspend/resume */
-static int __maybe_unused ehci_suspend(struct usb_hcd *hcd, bool do_wakeup)
+int ehci_suspend(struct usb_hcd *hcd, bool do_wakeup)
{
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
@@ -1119,9 +1109,10 @@
return 0;
}
+EXPORT_SYMBOL_GPL(ehci_suspend);
/* Returns 0 if power was preserved, 1 if power was lost */
-static int __maybe_unused ehci_resume(struct usb_hcd *hcd, bool hibernated)
+int ehci_resume(struct usb_hcd *hcd, bool hibernated)
{
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
@@ -1177,33 +1168,83 @@
ehci->rh_state = EHCI_RH_SUSPENDED;
spin_unlock_irq(&ehci->lock);
- /* here we "know" root ports should always stay powered */
- ehci_port_power(ehci, 1);
-
return 1;
}
+EXPORT_SYMBOL_GPL(ehci_resume);
#endif
/*-------------------------------------------------------------------------*/
/*
- * The EHCI in ChipIdea HDRC cannot be a separate module or device,
- * because its registers (and irq) are shared between host/gadget/otg
- * functions and in order to facilitate role switching we cannot
- * give the ehci driver exclusive access to those.
+ * Generic structure: This gets copied for platform drivers so that
+ * individual entries can be overridden as needed.
*/
-#ifndef CHIPIDEA_EHCI
+
+static const struct hc_driver ehci_hc_driver = {
+ .description = hcd_name,
+ .product_desc = "EHCI Host Controller",
+ .hcd_priv_size = sizeof(struct ehci_hcd),
+
+ /*
+ * generic hardware linkage
+ */
+ .irq = ehci_irq,
+ .flags = HCD_MEMORY | HCD_USB2,
+
+ /*
+ * basic lifecycle operations
+ */
+ .reset = ehci_setup,
+ .start = ehci_run,
+ .stop = ehci_stop,
+ .shutdown = ehci_shutdown,
+
+ /*
+ * managing i/o requests and associated device resources
+ */
+ .urb_enqueue = ehci_urb_enqueue,
+ .urb_dequeue = ehci_urb_dequeue,
+ .endpoint_disable = ehci_endpoint_disable,
+ .endpoint_reset = ehci_endpoint_reset,
+ .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
+
+ /*
+ * scheduling support
+ */
+ .get_frame_number = ehci_get_frame,
+
+ /*
+ * root hub support
+ */
+ .hub_status_data = ehci_hub_status_data,
+ .hub_control = ehci_hub_control,
+ .bus_suspend = ehci_bus_suspend,
+ .bus_resume = ehci_bus_resume,
+ .relinquish_port = ehci_relinquish_port,
+ .port_handed_over = ehci_port_handed_over,
+};
+
+void ehci_init_driver(struct hc_driver *drv,
+ const struct ehci_driver_overrides *over)
+{
+ /* Copy the generic table to drv and then apply the overrides */
+ *drv = ehci_hc_driver;
+
+ if (over) {
+ drv->hcd_priv_size += over->extra_priv_size;
+ if (over->reset)
+ drv->reset = over->reset;
+ }
+}
+EXPORT_SYMBOL_GPL(ehci_init_driver);
+
+/*-------------------------------------------------------------------------*/
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_AUTHOR (DRIVER_AUTHOR);
MODULE_LICENSE ("GPL");
-#ifdef CONFIG_PCI
-#include "ehci-pci.c"
-#define PCI_DRIVER ehci_pci_driver
-#endif
-
#ifdef CONFIG_USB_EHCI_FSL
#include "ehci-fsl.c"
#define PLATFORM_DRIVER ehci_fsl_driver
@@ -1219,11 +1260,6 @@
#define PLATFORM_DRIVER ehci_hcd_sh_driver
#endif
-#ifdef CONFIG_MIPS_ALCHEMY
-#include "ehci-au1xxx.c"
-#define PLATFORM_DRIVER ehci_hcd_au1xxx_driver
-#endif
-
#ifdef CONFIG_USB_EHCI_HCD_OMAP
#include "ehci-omap.c"
#define PLATFORM_DRIVER ehci_hcd_omap_driver
@@ -1249,11 +1285,6 @@
#define PLATFORM_DRIVER ehci_orion_driver
#endif
-#ifdef CONFIG_ARCH_IXP4XX
-#include "ehci-ixp4xx.c"
-#define PLATFORM_DRIVER ixp4xx_ehci_driver
-#endif
-
#ifdef CONFIG_USB_W90X900_EHCI
#include "ehci-w90x900.c"
#define PLATFORM_DRIVER ehci_hcd_w90x900_driver
@@ -1269,11 +1300,6 @@
#define PLATFORM_DRIVER ehci_octeon_driver
#endif
-#ifdef CONFIG_USB_CNS3XXX_EHCI
-#include "ehci-cns3xxx.c"
-#define PLATFORM_DRIVER cns3xxx_ehci_driver
-#endif
-
#ifdef CONFIG_ARCH_VT8500
#include "ehci-vt8500.c"
#define PLATFORM_DRIVER vt8500_ehci_driver
@@ -1314,34 +1340,23 @@
#define PLATFORM_DRIVER ehci_grlib_driver
#endif
-#ifdef CONFIG_CPU_XLR
-#include "ehci-xls.c"
-#define PLATFORM_DRIVER ehci_xls_driver
-#endif
-
#ifdef CONFIG_USB_EHCI_MV
#include "ehci-mv.c"
#define PLATFORM_DRIVER ehci_mv_driver
#endif
-#ifdef CONFIG_MACH_LOONGSON1
-#include "ehci-ls1x.c"
-#define PLATFORM_DRIVER ehci_ls1x_driver
-#endif
-
#ifdef CONFIG_MIPS_SEAD3
#include "ehci-sead3.c"
#define PLATFORM_DRIVER ehci_hcd_sead3_driver
#endif
-#ifdef CONFIG_USB_EHCI_HCD_PLATFORM
-#include "ehci-platform.c"
-#define PLATFORM_DRIVER ehci_platform_driver
-#endif
-
-#if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
- !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) && \
- !defined(XILINX_OF_PLATFORM_DRIVER)
+#if !IS_ENABLED(CONFIG_USB_EHCI_PCI) && \
+ !IS_ENABLED(CONFIG_USB_EHCI_HCD_PLATFORM) && \
+ !defined(CONFIG_USB_CHIPIDEA_HOST) && \
+ !defined(PLATFORM_DRIVER) && \
+ !defined(PS3_SYSTEM_BUS_DRIVER) && \
+ !defined(OF_PLATFORM_DRIVER) && \
+ !defined(XILINX_OF_PLATFORM_DRIVER)
#error "missing bus glue for ehci-hcd"
#endif
@@ -1378,12 +1393,6 @@
goto clean0;
#endif
-#ifdef PCI_DRIVER
- retval = pci_register_driver(&PCI_DRIVER);
- if (retval < 0)
- goto clean1;
-#endif
-
#ifdef PS3_SYSTEM_BUS_DRIVER
retval = ps3_ehci_driver_register(&PS3_SYSTEM_BUS_DRIVER);
if (retval < 0)
@@ -1415,10 +1424,6 @@
ps3_ehci_driver_unregister(&PS3_SYSTEM_BUS_DRIVER);
clean2:
#endif
-#ifdef PCI_DRIVER
- pci_unregister_driver(&PCI_DRIVER);
-clean1:
-#endif
#ifdef PLATFORM_DRIVER
platform_driver_unregister(&PLATFORM_DRIVER);
clean0:
@@ -1444,9 +1449,6 @@
#ifdef PLATFORM_DRIVER
platform_driver_unregister(&PLATFORM_DRIVER);
#endif
-#ifdef PCI_DRIVER
- pci_unregister_driver(&PCI_DRIVER);
-#endif
#ifdef PS3_SYSTEM_BUS_DRIVER
ps3_ehci_driver_unregister(&PS3_SYSTEM_BUS_DRIVER);
#endif
@@ -1456,5 +1458,3 @@
clear_bit(USB_EHCI_LOADED, &usb_hcds_loaded);
}
module_exit(ehci_hcd_cleanup);
-
-#endif /* CHIPIDEA_EHCI */
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index 914ce93..4ccb97c 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -56,6 +56,19 @@
if (!ehci->owned_ports)
return;
+ /* Make sure the ports are powered */
+ port = HCS_N_PORTS(ehci->hcs_params);
+ while (port--) {
+ if (test_bit(port, &ehci->owned_ports)) {
+ reg = &ehci->regs->port_status[port];
+ status = ehci_readl(ehci, reg) & ~PORT_RWC_BITS;
+ if (!(status & PORT_POWER)) {
+ status |= PORT_POWER;
+ ehci_writel(ehci, status, reg);
+ }
+ }
+ }
+
/* Give the connections some time to appear */
msleep(20);
@@ -384,11 +397,24 @@
ehci_writel(ehci, ehci->command, &ehci->regs->command);
ehci->rh_state = EHCI_RH_RUNNING;
- /* Some controller/firmware combinations need a delay during which
- * they set up the port statuses. See Bugzilla #8190. */
- spin_unlock_irq(&ehci->lock);
- msleep(8);
- spin_lock_irq(&ehci->lock);
+ /*
+ * According to Bugzilla #8190, the port status for some controllers
+ * will be wrong without a delay. At their wrong status, the port
+ * is enabled, but not suspended neither resumed.
+ */
+ i = HCS_N_PORTS(ehci->hcs_params);
+ while (i--) {
+ temp = ehci_readl(ehci, &ehci->regs->port_status[i]);
+ if ((temp & PORT_PE) &&
+ !(temp & (PORT_SUSPEND | PORT_RESUME))) {
+ ehci_dbg(ehci, "Port status(0x%x) is wrong\n", temp);
+ spin_unlock_irq(&ehci->lock);
+ msleep(8);
+ spin_lock_irq(&ehci->lock);
+ break;
+ }
+ }
+
if (ehci->shutdown)
goto shutdown;
@@ -764,11 +790,6 @@
status_reg);
break;
case USB_PORT_FEAT_C_CONNECTION:
- if (ehci->has_lpm) {
- /* clear PORTSC bits on disconnect */
- temp &= ~PORT_LPM;
- temp &= ~PORT_DEV_ADDR;
- }
ehci_writel(ehci, temp | PORT_CSC, status_reg);
break;
case USB_PORT_FEAT_C_OVER_CURRENT:
@@ -1088,8 +1109,7 @@
return retval;
}
-static void __maybe_unused ehci_relinquish_port(struct usb_hcd *hcd,
- int portnum)
+static void ehci_relinquish_port(struct usb_hcd *hcd, int portnum)
{
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
@@ -1098,8 +1118,7 @@
set_owner(ehci, --portnum, PORT_OWNER);
}
-static int __maybe_unused ehci_port_handed_over(struct usb_hcd *hcd,
- int portnum)
+static int ehci_port_handed_over(struct usb_hcd *hcd, int portnum)
{
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
u32 __iomem *reg;
diff --git a/drivers/usb/host/ehci-ixp4xx.c b/drivers/usb/host/ehci-ixp4xx.c
deleted file mode 100644
index f224c0a..0000000
--- a/drivers/usb/host/ehci-ixp4xx.c
+++ /dev/null
@@ -1,139 +0,0 @@
-/*
- * IXP4XX EHCI Host Controller Driver
- *
- * Author: Vladimir Barinov <vbarinov@embeddedalley.com>
- *
- * Based on "ehci-fsl.c" by Randy Vinson <rvinson@mvista.com>
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/platform_device.h>
-
-static int ixp4xx_ehci_init(struct usb_hcd *hcd)
-{
- struct ehci_hcd *ehci = hcd_to_ehci(hcd);
- int retval = 0;
-
- ehci->big_endian_desc = 1;
- ehci->big_endian_mmio = 1;
-
- ehci->caps = hcd->regs + 0x100;
-
- hcd->has_tt = 1;
-
- retval = ehci_setup(hcd);
- if (retval)
- return retval;
-
- ehci_port_power(ehci, 0);
-
- return retval;
-}
-
-static const struct hc_driver ixp4xx_ehci_hc_driver = {
- .description = hcd_name,
- .product_desc = "IXP4XX EHCI Host Controller",
- .hcd_priv_size = sizeof(struct ehci_hcd),
- .irq = ehci_irq,
- .flags = HCD_MEMORY | HCD_USB2,
- .reset = ixp4xx_ehci_init,
- .start = ehci_run,
- .stop = ehci_stop,
- .shutdown = ehci_shutdown,
- .urb_enqueue = ehci_urb_enqueue,
- .urb_dequeue = ehci_urb_dequeue,
- .endpoint_disable = ehci_endpoint_disable,
- .endpoint_reset = ehci_endpoint_reset,
- .get_frame_number = ehci_get_frame,
- .hub_status_data = ehci_hub_status_data,
- .hub_control = ehci_hub_control,
-#if defined(CONFIG_PM)
- .bus_suspend = ehci_bus_suspend,
- .bus_resume = ehci_bus_resume,
-#endif
- .relinquish_port = ehci_relinquish_port,
- .port_handed_over = ehci_port_handed_over,
-
- .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
-};
-
-static int ixp4xx_ehci_probe(struct platform_device *pdev)
-{
- struct usb_hcd *hcd;
- const struct hc_driver *driver = &ixp4xx_ehci_hc_driver;
- struct resource *res;
- int irq;
- int retval;
-
- if (usb_disabled())
- return -ENODEV;
-
- res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
- if (!res) {
- dev_err(&pdev->dev,
- "Found HC with no IRQ. Check %s setup!\n",
- dev_name(&pdev->dev));
- return -ENODEV;
- }
- irq = res->start;
-
- hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
- if (!hcd) {
- retval = -ENOMEM;
- goto fail_create_hcd;
- }
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- dev_err(&pdev->dev,
- "Found HC with no register addr. Check %s setup!\n",
- dev_name(&pdev->dev));
- retval = -ENODEV;
- goto fail_request_resource;
- }
- hcd->rsrc_start = res->start;
- hcd->rsrc_len = resource_size(res);
-
- hcd->regs = devm_request_and_ioremap(&pdev->dev, res);
- if (hcd->regs == NULL) {
- dev_dbg(&pdev->dev, "error mapping memory\n");
- retval = -EFAULT;
- goto fail_request_resource;
- }
-
- retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
- if (retval)
- goto fail_request_resource;
-
- return retval;
-
-fail_request_resource:
- usb_put_hcd(hcd);
-fail_create_hcd:
- dev_err(&pdev->dev, "init %s fail, %d\n", dev_name(&pdev->dev), retval);
- return retval;
-}
-
-static int ixp4xx_ehci_remove(struct platform_device *pdev)
-{
- struct usb_hcd *hcd = platform_get_drvdata(pdev);
-
- usb_remove_hcd(hcd);
- usb_put_hcd(hcd);
-
- return 0;
-}
-
-MODULE_ALIAS("platform:ixp4xx-ehci");
-
-static struct platform_driver ixp4xx_ehci_driver = {
- .probe = ixp4xx_ehci_probe,
- .remove = ixp4xx_ehci_remove,
- .driver = {
- .name = "ixp4xx-ehci",
- },
-};
diff --git a/drivers/usb/host/ehci-lpm.c b/drivers/usb/host/ehci-lpm.c
deleted file mode 100644
index 2111627..0000000
--- a/drivers/usb/host/ehci-lpm.c
+++ /dev/null
@@ -1,84 +0,0 @@
-/* ehci-lpm.c EHCI HCD LPM support code
- * Copyright (c) 2008 - 2010, Intel Corporation.
- * Author: Jacob Pan <jacob.jun.pan@intel.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-/* this file is part of ehci-hcd.c */
-static int __maybe_unused ehci_lpm_set_da(struct ehci_hcd *ehci,
- int dev_addr, int port_num)
-{
- u32 __iomem portsc;
-
- ehci_dbg(ehci, "set dev address %d for port %d\n", dev_addr, port_num);
- if (port_num > HCS_N_PORTS(ehci->hcs_params)) {
- ehci_dbg(ehci, "invalid port number %d\n", port_num);
- return -ENODEV;
- }
- portsc = ehci_readl(ehci, &ehci->regs->port_status[port_num-1]);
- portsc &= ~PORT_DEV_ADDR;
- portsc |= dev_addr<<25;
- ehci_writel(ehci, portsc, &ehci->regs->port_status[port_num-1]);
- return 0;
-}
-
-/*
- * this function is used to check if the device support LPM
- * if yes, mark the PORTSC register with PORT_LPM bit
- */
-static int __maybe_unused ehci_lpm_check(struct ehci_hcd *ehci, int port)
-{
- u32 __iomem *portsc ;
- u32 val32;
- int retval;
-
- portsc = &ehci->regs->port_status[port-1];
- val32 = ehci_readl(ehci, portsc);
- if (!(val32 & PORT_DEV_ADDR)) {
- ehci_dbg(ehci, "LPM: no device attached\n");
- return -ENODEV;
- }
- val32 |= PORT_LPM;
- ehci_writel(ehci, val32, portsc);
- msleep(5);
- val32 |= PORT_SUSPEND;
- ehci_dbg(ehci, "Sending LPM 0x%08x to port %d\n", val32, port);
- ehci_writel(ehci, val32, portsc);
- /* wait for ACK */
- msleep(10);
- retval = handshake(ehci, &ehci->regs->port_status[port-1], PORT_SSTS,
- PORTSC_SUSPEND_STS_ACK, 125);
- dbg_port(ehci, "LPM", port, val32);
- if (retval != -ETIMEDOUT) {
- ehci_dbg(ehci, "LPM: device ACK for LPM\n");
- val32 |= PORT_LPM;
- /*
- * now device should be in L1 sleep, let's wake up the device
- * so that we can complete enumeration.
- */
- ehci_writel(ehci, val32, portsc);
- msleep(10);
- val32 |= PORT_RESUME;
- ehci_writel(ehci, val32, portsc);
- } else {
- ehci_dbg(ehci, "LPM: device does not ACK, disable LPM %d\n",
- retval);
- val32 &= ~PORT_LPM;
- retval = -ETIMEDOUT;
- ehci_writel(ehci, val32, portsc);
- }
-
- return retval;
-}
diff --git a/drivers/usb/host/ehci-ls1x.c b/drivers/usb/host/ehci-ls1x.c
deleted file mode 100644
index aa0f328..0000000
--- a/drivers/usb/host/ehci-ls1x.c
+++ /dev/null
@@ -1,147 +0,0 @@
-/*
- * Bus Glue for Loongson LS1X built-in EHCI controller.
- *
- * Copyright (c) 2012 Zhang, Keguang <keguang.zhang@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-
-#include <linux/platform_device.h>
-
-static int ehci_ls1x_reset(struct usb_hcd *hcd)
-{
- struct ehci_hcd *ehci = hcd_to_ehci(hcd);
- int ret;
-
- ehci->caps = hcd->regs;
-
- ret = ehci_setup(hcd);
- if (ret)
- return ret;
-
- ehci_port_power(ehci, 0);
-
- return 0;
-}
-
-static const struct hc_driver ehci_ls1x_hc_driver = {
- .description = hcd_name,
- .product_desc = "LOONGSON1 EHCI",
- .hcd_priv_size = sizeof(struct ehci_hcd),
-
- /*
- * generic hardware linkage
- */
- .irq = ehci_irq,
- .flags = HCD_MEMORY | HCD_USB2,
-
- /*
- * basic lifecycle operations
- */
- .reset = ehci_ls1x_reset,
- .start = ehci_run,
- .stop = ehci_stop,
- .shutdown = ehci_shutdown,
-
- /*
- * managing i/o requests and associated device resources
- */
- .urb_enqueue = ehci_urb_enqueue,
- .urb_dequeue = ehci_urb_dequeue,
- .endpoint_disable = ehci_endpoint_disable,
- .endpoint_reset = ehci_endpoint_reset,
-
- /*
- * scheduling support
- */
- .get_frame_number = ehci_get_frame,
-
- /*
- * root hub support
- */
- .hub_status_data = ehci_hub_status_data,
- .hub_control = ehci_hub_control,
- .relinquish_port = ehci_relinquish_port,
- .port_handed_over = ehci_port_handed_over,
-
- .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
-};
-
-static int ehci_hcd_ls1x_probe(struct platform_device *pdev)
-{
- struct usb_hcd *hcd;
- struct resource *res;
- int irq;
- int ret;
-
- pr_debug("initializing loongson1 ehci USB Controller\n");
-
- if (usb_disabled())
- return -ENODEV;
-
- res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
- if (!res) {
- dev_err(&pdev->dev,
- "Found HC with no IRQ. Check %s setup!\n",
- dev_name(&pdev->dev));
- return -ENODEV;
- }
- irq = res->start;
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- dev_err(&pdev->dev,
- "Found HC with no register addr. Check %s setup!\n",
- dev_name(&pdev->dev));
- return -ENODEV;
- }
-
- hcd = usb_create_hcd(&ehci_ls1x_hc_driver, &pdev->dev,
- dev_name(&pdev->dev));
- if (!hcd)
- return -ENOMEM;
- hcd->rsrc_start = res->start;
- hcd->rsrc_len = resource_size(res);
-
- hcd->regs = devm_request_and_ioremap(&pdev->dev, res);
- if (hcd->regs == NULL) {
- dev_dbg(&pdev->dev, "error mapping memory\n");
- ret = -EFAULT;
- goto err_put_hcd;
- }
-
- ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED);
- if (ret)
- goto err_put_hcd;
-
- return ret;
-
-err_put_hcd:
- usb_put_hcd(hcd);
- return ret;
-}
-
-static int ehci_hcd_ls1x_remove(struct platform_device *pdev)
-{
- struct usb_hcd *hcd = platform_get_drvdata(pdev);
-
- usb_remove_hcd(hcd);
- usb_put_hcd(hcd);
-
- return 0;
-}
-
-static struct platform_driver ehci_ls1x_driver = {
- .probe = ehci_hcd_ls1x_probe,
- .remove = ehci_hcd_ls1x_remove,
- .shutdown = usb_hcd_platform_shutdown,
- .driver = {
- .name = "ls1x-ehci",
- .owner = THIS_MODULE,
- },
-};
-
-MODULE_ALIAS(PLATFORM_MODULE_PREFIX "ls1x-ehci");
diff --git a/drivers/usb/host/ehci-msm.c b/drivers/usb/host/ehci-msm.c
index 4af4dc5..88a49c8 100644
--- a/drivers/usb/host/ehci-msm.c
+++ b/drivers/usb/host/ehci-msm.c
@@ -53,7 +53,6 @@
/* Disable streaming mode and select host mode */
writel(0x13, USB_USBMODE);
- ehci_port_power(ehci, 1);
return 0;
}
@@ -174,7 +173,7 @@
return ret;
}
-static int __devexit ehci_msm_remove(struct platform_device *pdev)
+static int ehci_msm_remove(struct platform_device *pdev)
{
struct usb_hcd *hcd = platform_get_drvdata(pdev);
@@ -221,7 +220,7 @@
static struct platform_driver ehci_msm_driver = {
.probe = ehci_msm_probe,
- .remove = __devexit_p(ehci_msm_remove),
+ .remove = ehci_msm_remove,
.driver = {
.name = "msm_hsusb_host",
.pm = &ehci_msm_dev_pm_ops,
diff --git a/drivers/usb/host/ehci-mxc.c b/drivers/usb/host/ehci-mxc.c
index 4a08fc0..8804f74 100644
--- a/drivers/usb/host/ehci-mxc.c
+++ b/drivers/usb/host/ehci-mxc.c
@@ -39,17 +39,9 @@
/* called during probe() after chip reset completes */
static int ehci_mxc_setup(struct usb_hcd *hcd)
{
- struct ehci_hcd *ehci = hcd_to_ehci(hcd);
- int retval;
-
hcd->has_tt = 1;
- retval = ehci_setup(hcd);
- if (retval)
- return retval;
-
- ehci_port_power(ehci, 0);
- return 0;
+ return ehci_setup(hcd);
}
static const struct hc_driver ehci_mxc_hc_driver = {
diff --git a/drivers/usb/host/ehci-octeon.c b/drivers/usb/host/ehci-octeon.c
index ba26957a..a89750f 100644
--- a/drivers/usb/host/ehci-octeon.c
+++ b/drivers/usb/host/ehci-octeon.c
@@ -159,9 +159,6 @@
platform_set_drvdata(pdev, hcd);
- /* root ports should always stay powered */
- ehci_port_power(ehci, 1);
-
return 0;
err3:
ehci_octeon_stop();
diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
index d7fe287..44e7d0f 100644
--- a/drivers/usb/host/ehci-omap.c
+++ b/drivers/usb/host/ehci-omap.c
@@ -146,9 +146,6 @@
gpio_set_value_cansleep(pdata->reset_gpio_port[1], 1);
}
- /* root ports should always stay powered */
- ehci_port_power(ehci, 1);
-
return rc;
}
diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c
index 9c2717d..f74794c 100644
--- a/drivers/usb/host/ehci-orion.c
+++ b/drivers/usb/host/ehci-orion.c
@@ -101,20 +101,6 @@
wrl(USB_MODE, 0x13);
}
-static int ehci_orion_setup(struct usb_hcd *hcd)
-{
- struct ehci_hcd *ehci = hcd_to_ehci(hcd);
- int retval;
-
- retval = ehci_setup(hcd);
- if (retval)
- return retval;
-
- ehci_port_power(ehci, 0);
-
- return retval;
-}
-
static const struct hc_driver ehci_orion_hc_driver = {
.description = hcd_name,
.product_desc = "Marvell Orion EHCI",
@@ -129,7 +115,7 @@
/*
* basic lifecycle operations
*/
- .reset = ehci_orion_setup,
+ .reset = ehci_setup,
.start = ehci_run,
.stop = ehci_stop,
.shutdown = ehci_shutdown,
@@ -160,7 +146,7 @@
.clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
};
-static void __devinit
+static void
ehci_orion_conf_mbus_windows(struct usb_hcd *hcd,
const struct mbus_dram_target_info *dram)
{
@@ -181,7 +167,7 @@
}
}
-static int __devinit ehci_orion_drv_probe(struct platform_device *pdev)
+static int ehci_orion_drv_probe(struct platform_device *pdev)
{
struct orion_ehci_data *pd = pdev->dev.platform_data;
const struct mbus_dram_target_info *dram;
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index 2cb7d37..dabb204 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -18,9 +18,18 @@
* Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-#ifndef CONFIG_PCI
-#error "This file is PCI bus glue. CONFIG_PCI must be defined."
-#endif
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+
+#include "ehci.h"
+#include "pci-quirks.h"
+
+#define DRIVER_DESC "EHCI PCI platform driver"
+
+static const char hcd_name[] = "ehci-pci";
/* defined here to avoid adding to pci_ids.h for single instance use */
#define PCI_DEVICE_ID_INTEL_CE4100_USB 0x2e70
@@ -103,7 +112,6 @@
}
break;
case PCI_VENDOR_ID_INTEL:
- ehci->fs_i_thresh = 1;
if (pdev->device == PCI_DEVICE_ID_INTEL_CE4100_USB)
hcd->has_tt = 1;
break;
@@ -203,11 +211,6 @@
break;
case PCI_VENDOR_ID_INTEL:
ehci->need_io_watchdog = 0;
- if (pdev->device == 0x0806 || pdev->device == 0x0811
- || pdev->device == 0x0829) {
- ehci_info(ehci, "disable lpm for langwell/penwell\n");
- ehci->has_lpm = 0;
- }
break;
case PCI_VENDOR_ID_NVIDIA:
switch (pdev->device) {
@@ -217,8 +220,7 @@
* devices with PPCD enabled.
*/
case 0x0d9d:
- ehci_info(ehci, "disable lpm/ppcd for nvidia mcp89");
- ehci->has_lpm = 0;
+ ehci_info(ehci, "disable ppcd for nvidia mcp89\n");
ehci->has_ppcd = 0;
ehci->command &= ~CMD_PPCEE;
break;
@@ -304,7 +306,6 @@
ehci_warn(ehci, "selective suspend/wakeup unavailable\n");
#endif
- ehci_port_power(ehci, 1);
retval = ehci_pci_reinit(ehci, pdev);
done:
return retval;
@@ -323,18 +324,14 @@
* Also they depend on separate root hub suspend/resume.
*/
-static int ehci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
-{
- return ehci_suspend(hcd, do_wakeup);
-}
-
static bool usb_is_intel_switchable_ehci(struct pci_dev *pdev)
{
return pdev->class == PCI_CLASS_SERIAL_USB_EHCI &&
pdev->vendor == PCI_VENDOR_ID_INTEL &&
(pdev->device == 0x1E26 ||
pdev->device == 0x8C2D ||
- pdev->device == 0x8C26);
+ pdev->device == 0x8C26 ||
+ pdev->device == 0x9C26);
}
static void ehci_enable_xhci_companion(void)
@@ -378,76 +375,17 @@
(void) ehci_pci_reinit(ehci, pdev);
return 0;
}
-#endif
-static int ehci_update_device(struct usb_hcd *hcd, struct usb_device *udev)
-{
- struct ehci_hcd *ehci = hcd_to_ehci(hcd);
- int rc = 0;
+#else
- if (!udev->parent) /* udev is root hub itself, impossible */
- rc = -1;
- /* we only support lpm device connected to root hub yet */
- if (ehci->has_lpm && !udev->parent->parent) {
- rc = ehci_lpm_set_da(ehci, udev->devnum, udev->portnum);
- if (!rc)
- rc = ehci_lpm_check(ehci, udev->portnum);
- }
- return rc;
-}
+#define ehci_suspend NULL
+#define ehci_pci_resume NULL
+#endif /* CONFIG_PM */
-static const struct hc_driver ehci_pci_hc_driver = {
- .description = hcd_name,
- .product_desc = "EHCI Host Controller",
- .hcd_priv_size = sizeof(struct ehci_hcd),
+static struct hc_driver __read_mostly ehci_pci_hc_driver;
- /*
- * generic hardware linkage
- */
- .irq = ehci_irq,
- .flags = HCD_MEMORY | HCD_USB2,
-
- /*
- * basic lifecycle operations
- */
+static const struct ehci_driver_overrides pci_overrides __initdata = {
.reset = ehci_pci_setup,
- .start = ehci_run,
-#ifdef CONFIG_PM
- .pci_suspend = ehci_pci_suspend,
- .pci_resume = ehci_pci_resume,
-#endif
- .stop = ehci_stop,
- .shutdown = ehci_shutdown,
-
- /*
- * managing i/o requests and associated device resources
- */
- .urb_enqueue = ehci_urb_enqueue,
- .urb_dequeue = ehci_urb_dequeue,
- .endpoint_disable = ehci_endpoint_disable,
- .endpoint_reset = ehci_endpoint_reset,
-
- /*
- * scheduling support
- */
- .get_frame_number = ehci_get_frame,
-
- /*
- * root hub support
- */
- .hub_status_data = ehci_hub_status_data,
- .hub_control = ehci_hub_control,
- .bus_suspend = ehci_bus_suspend,
- .bus_resume = ehci_bus_resume,
- .relinquish_port = ehci_relinquish_port,
- .port_handed_over = ehci_port_handed_over,
-
- /*
- * call back when device connected and addressed
- */
- .update_device = ehci_update_device,
-
- .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
};
/*-------------------------------------------------------------------------*/
@@ -480,3 +418,31 @@
},
#endif
};
+
+static int __init ehci_pci_init(void)
+{
+ if (usb_disabled())
+ return -ENODEV;
+
+ pr_info("%s: " DRIVER_DESC "\n", hcd_name);
+
+ ehci_init_driver(&ehci_pci_hc_driver, &pci_overrides);
+
+ /* Entries for the PCI suspend/resume callbacks are special */
+ ehci_pci_hc_driver.pci_suspend = ehci_suspend;
+ ehci_pci_hc_driver.pci_resume = ehci_pci_resume;
+
+ return pci_register_driver(&ehci_pci_driver);
+}
+module_init(ehci_pci_init);
+
+static void __exit ehci_pci_cleanup(void)
+{
+ pci_unregister_driver(&ehci_pci_driver);
+}
+module_exit(ehci_pci_cleanup);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR("David Brownell");
+MODULE_AUTHOR("Alan Stern");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c
index 764e010..58fa0c9 100644
--- a/drivers/usb/host/ehci-platform.c
+++ b/drivers/usb/host/ehci-platform.c
@@ -18,9 +18,21 @@
*
* Licensed under the GNU/GPL. See COPYING for details.
*/
+#include <linux/kernel.h>
+#include <linux/hrtimer.h>
+#include <linux/io.h>
+#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
#include <linux/usb/ehci_pdriver.h>
+#include "ehci.h"
+
+#define DRIVER_DESC "EHCI generic platform driver"
+
+static const char hcd_name[] = "ehci-platform";
+
static int ehci_platform_reset(struct usb_hcd *hcd)
{
struct platform_device *pdev = to_platform_device(hcd->self.controller);
@@ -38,47 +50,18 @@
if (retval)
return retval;
- if (pdata->port_power_on)
- ehci_port_power(ehci, 1);
- if (pdata->port_power_off)
- ehci_port_power(ehci, 0);
-
+ if (pdata->no_io_watchdog)
+ ehci->need_io_watchdog = 0;
return 0;
}
-static const struct hc_driver ehci_platform_hc_driver = {
- .description = hcd_name,
- .product_desc = "Generic Platform EHCI Controller",
- .hcd_priv_size = sizeof(struct ehci_hcd),
+static struct hc_driver __read_mostly ehci_platform_hc_driver;
- .irq = ehci_irq,
- .flags = HCD_MEMORY | HCD_USB2,
-
- .reset = ehci_platform_reset,
- .start = ehci_run,
- .stop = ehci_stop,
- .shutdown = ehci_shutdown,
-
- .urb_enqueue = ehci_urb_enqueue,
- .urb_dequeue = ehci_urb_dequeue,
- .endpoint_disable = ehci_endpoint_disable,
- .endpoint_reset = ehci_endpoint_reset,
-
- .get_frame_number = ehci_get_frame,
-
- .hub_status_data = ehci_hub_status_data,
- .hub_control = ehci_hub_control,
-#if defined(CONFIG_PM)
- .bus_suspend = ehci_bus_suspend,
- .bus_resume = ehci_bus_resume,
-#endif
- .relinquish_port = ehci_relinquish_port,
- .port_handed_over = ehci_port_handed_over,
-
- .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
+static const struct ehci_driver_overrides platform_overrides __initdata = {
+ .reset = ehci_platform_reset,
};
-static int __devinit ehci_platform_probe(struct platform_device *dev)
+static int ehci_platform_probe(struct platform_device *dev)
{
struct usb_hcd *hcd;
struct resource *res_mem;
@@ -96,12 +79,12 @@
irq = platform_get_irq(dev, 0);
if (irq < 0) {
- pr_err("no irq provided");
+ dev_err(&dev->dev, "no irq provided");
return irq;
}
res_mem = platform_get_resource(dev, IORESOURCE_MEM, 0);
if (!res_mem) {
- pr_err("no memory recourse provided");
+ dev_err(&dev->dev, "no memory resource provided");
return -ENXIO;
}
@@ -121,29 +104,19 @@
hcd->rsrc_start = res_mem->start;
hcd->rsrc_len = resource_size(res_mem);
- if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
- pr_err("controller already in use");
- err = -EBUSY;
- goto err_put_hcd;
- }
-
- hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
+ hcd->regs = devm_request_and_ioremap(&dev->dev, res_mem);
if (!hcd->regs) {
err = -ENOMEM;
- goto err_release_region;
+ goto err_put_hcd;
}
err = usb_add_hcd(hcd, irq, IRQF_SHARED);
if (err)
- goto err_iounmap;
+ goto err_put_hcd;
platform_set_drvdata(dev, hcd);
return err;
-err_iounmap:
- iounmap(hcd->regs);
-err_release_region:
- release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
err_put_hcd:
usb_put_hcd(hcd);
err_power:
@@ -153,14 +126,12 @@
return err;
}
-static int __devexit ehci_platform_remove(struct platform_device *dev)
+static int ehci_platform_remove(struct platform_device *dev)
{
struct usb_hcd *hcd = platform_get_drvdata(dev);
struct usb_ehci_pdata *pdata = dev->dev.platform_data;
usb_remove_hcd(hcd);
- iounmap(hcd->regs);
- release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
usb_put_hcd(hcd);
platform_set_drvdata(dev, NULL);
@@ -225,7 +196,7 @@
static struct platform_driver ehci_platform_driver = {
.id_table = ehci_platform_table,
.probe = ehci_platform_probe,
- .remove = __devexit_p(ehci_platform_remove),
+ .remove = ehci_platform_remove,
.shutdown = usb_hcd_platform_shutdown,
.driver = {
.owner = THIS_MODULE,
@@ -233,3 +204,26 @@
.pm = &ehci_platform_pm_ops,
}
};
+
+static int __init ehci_platform_init(void)
+{
+ if (usb_disabled())
+ return -ENODEV;
+
+ pr_info("%s: " DRIVER_DESC "\n", hcd_name);
+
+ ehci_init_driver(&ehci_platform_hc_driver, &platform_overrides);
+ return platform_driver_register(&ehci_platform_driver);
+}
+module_init(ehci_platform_init);
+
+static void __exit ehci_platform_cleanup(void)
+{
+ platform_driver_unregister(&ehci_platform_driver);
+}
+module_exit(ehci_platform_cleanup);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR("Hauke Mehrtens");
+MODULE_AUTHOR("Alan Stern");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/host/ehci-pmcmsp.c b/drivers/usb/host/ehci-pmcmsp.c
index 087aee2..363890e 100644
--- a/drivers/usb/host/ehci-pmcmsp.c
+++ b/drivers/usb/host/ehci-pmcmsp.c
@@ -90,7 +90,6 @@
return retval;
usb_hcd_tdi_set_mode(ehci);
- ehci_port_power(ehci, 0);
return retval;
}
diff --git a/drivers/usb/host/ehci-ppc-of.c b/drivers/usb/host/ehci-ppc-of.c
index fa937d0..45aceef 100644
--- a/drivers/usb/host/ehci-ppc-of.c
+++ b/drivers/usb/host/ehci-ppc-of.c
@@ -71,7 +71,7 @@
* Fix: Enable Break Memory Transfer (BMT) in INSNREG3
*/
#define PPC440EPX_EHCI0_INSREG_BMT (0x1 << 0)
-static int __devinit
+static int
ppc44x_enable_bmt(struct device_node *dn)
{
__iomem u32 *insreg_virt;
@@ -87,7 +87,7 @@
}
-static int __devinit ehci_hcd_ppc_of_probe(struct platform_device *op)
+static int ehci_hcd_ppc_of_probe(struct platform_device *op)
{
struct device_node *dn = op->dev.of_node;
struct usb_hcd *hcd;
diff --git a/drivers/usb/host/ehci-ps3.c b/drivers/usb/host/ehci-ps3.c
index 45a356e..df5925a 100644
--- a/drivers/usb/host/ehci-ps3.c
+++ b/drivers/usb/host/ehci-ps3.c
@@ -93,7 +93,7 @@
.clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
};
-static int __devinit ps3_ehci_probe(struct ps3_system_bus_device *dev)
+static int ps3_ehci_probe(struct ps3_system_bus_device *dev)
{
int result;
struct usb_hcd *hcd;
diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c
index 4b66374..3d98902 100644
--- a/drivers/usb/host/ehci-q.c
+++ b/drivers/usb/host/ehci-q.c
@@ -264,15 +264,9 @@
__releases(ehci->lock)
__acquires(ehci->lock)
{
- if (likely (urb->hcpriv != NULL)) {
- struct ehci_qh *qh = (struct ehci_qh *) urb->hcpriv;
-
- /* S-mask in a QH means it's an interrupt urb */
- if ((qh->hw->hw_info2 & cpu_to_hc32(ehci, QH_SMASK)) != 0) {
-
- /* ... update hc-wide periodic stats (for usbfs) */
- ehci_to_hcd(ehci)->self.bandwidth_int_reqs--;
- }
+ if (usb_pipetype(urb->pipe) == PIPE_INTERRUPT) {
+ /* ... update hc-wide periodic stats */
+ ehci_to_hcd(ehci)->self.bandwidth_int_reqs--;
}
if (unlikely(urb->unlinked)) {
diff --git a/drivers/usb/host/ehci-s5p.c b/drivers/usb/host/ehci-s5p.c
index 85b74be..319dcfa 100644
--- a/drivers/usb/host/ehci-s5p.c
+++ b/drivers/usb/host/ehci-s5p.c
@@ -85,7 +85,7 @@
static u64 ehci_s5p_dma_mask = DMA_BIT_MASK(32);
-static int __devinit s5p_ehci_probe(struct platform_device *pdev)
+static int s5p_ehci_probe(struct platform_device *pdev)
{
struct s5p_ehci_platdata *pdata;
struct s5p_ehci_hcd *s5p_ehci;
@@ -136,7 +136,7 @@
goto fail_clk;
}
- err = clk_enable(s5p_ehci->clk);
+ err = clk_prepare_enable(s5p_ehci->clk);
if (err)
goto fail_clk;
@@ -183,13 +183,13 @@
return 0;
fail_io:
- clk_disable(s5p_ehci->clk);
+ clk_disable_unprepare(s5p_ehci->clk);
fail_clk:
usb_put_hcd(hcd);
return err;
}
-static int __devexit s5p_ehci_remove(struct platform_device *pdev)
+static int s5p_ehci_remove(struct platform_device *pdev)
{
struct s5p_ehci_platdata *pdata = pdev->dev.platform_data;
struct s5p_ehci_hcd *s5p_ehci = platform_get_drvdata(pdev);
@@ -200,7 +200,7 @@
if (pdata && pdata->phy_exit)
pdata->phy_exit(pdev, S5P_USB_PHY_HOST);
- clk_disable(s5p_ehci->clk);
+ clk_disable_unprepare(s5p_ehci->clk);
usb_put_hcd(hcd);
@@ -231,7 +231,7 @@
if (pdata && pdata->phy_exit)
pdata->phy_exit(pdev, S5P_USB_PHY_HOST);
- clk_disable(s5p_ehci->clk);
+ clk_disable_unprepare(s5p_ehci->clk);
return rc;
}
@@ -243,7 +243,7 @@
struct platform_device *pdev = to_platform_device(dev);
struct s5p_ehci_platdata *pdata = pdev->dev.platform_data;
- clk_enable(s5p_ehci->clk);
+ clk_prepare_enable(s5p_ehci->clk);
if (pdata && pdata->phy_init)
pdata->phy_init(pdev, S5P_USB_PHY_HOST);
@@ -274,7 +274,7 @@
static struct platform_driver s5p_ehci_driver = {
.probe = s5p_ehci_probe,
- .remove = __devexit_p(s5p_ehci_remove),
+ .remove = s5p_ehci_remove,
.shutdown = s5p_ehci_shutdown,
.driver = {
.name = "s5p-ehci",
diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index 7cf3da7..69ebee7 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -36,29 +36,6 @@
static int ehci_get_frame (struct usb_hcd *hcd);
-#ifdef CONFIG_PCI
-
-static unsigned ehci_read_frame_index(struct ehci_hcd *ehci)
-{
- unsigned uf;
-
- /*
- * The MosChip MCS9990 controller updates its microframe counter
- * a little before the frame counter, and occasionally we will read
- * the invalid intermediate value. Avoid problems by checking the
- * microframe number (the low-order 3 bits); if they are 0 then
- * re-read the register to get the correct value.
- */
- uf = ehci_readl(ehci, &ehci->regs->frame_index);
- if (unlikely(ehci->frame_index_bug && ((uf & 7) == 0)))
- uf = ehci_readl(ehci, &ehci->regs->frame_index);
- return uf;
-}
-
-#endif
-
-/*-------------------------------------------------------------------------*/
-
/*
* periodic_next_shadow - return "next" pointer on shadow list
* @periodic: host pointer to qh/itd/sitd
@@ -1361,7 +1338,7 @@
* given EHCI_TUNE_FLS and the slop). Or, write a smarter scheduler!
*/
-#define SCHEDULE_SLOP 80 /* microframes */
+#define SCHEDULING_DELAY 40 /* microframes */
static int
iso_stream_schedule (
@@ -1370,7 +1347,7 @@
struct ehci_iso_stream *stream
)
{
- u32 now, next, start, period, span;
+ u32 now, base, next, start, period, span;
int status;
unsigned mod = ehci->periodic_size << 3;
struct ehci_iso_sched *sched = urb->hcpriv;
@@ -1382,62 +1359,72 @@
span <<= 3;
}
- if (span > mod - SCHEDULE_SLOP) {
- ehci_dbg (ehci, "iso request %p too long\n", urb);
- status = -EFBIG;
- goto fail;
- }
-
now = ehci_read_frame_index(ehci) & (mod - 1);
/* Typical case: reuse current schedule, stream is still active.
* Hopefully there are no gaps from the host falling behind
- * (irq delays etc), but if there are we'll take the next
- * slot in the schedule, implicitly assuming URB_ISO_ASAP.
+ * (irq delays etc). If there are, the behavior depends on
+ * whether URB_ISO_ASAP is set.
*/
if (likely (!list_empty (&stream->td_list))) {
- u32 excess;
- /* For high speed devices, allow scheduling within the
- * isochronous scheduling threshold. For full speed devices
- * and Intel PCI-based controllers, don't (work around for
- * Intel ICH9 bug).
- */
- if (!stream->highspeed && ehci->fs_i_thresh)
- next = now + ehci->i_thresh;
+ /* Take the isochronous scheduling threshold into account */
+ if (ehci->i_thresh)
+ next = now + ehci->i_thresh; /* uframe cache */
else
- next = now;
+ next = (now + 2 + 7) & ~0x07; /* full frame cache */
- /* Fell behind (by up to twice the slop amount)?
- * We decide based on the time of the last currently-scheduled
- * slot, not the time of the next available slot.
+ /*
+ * Use ehci->last_iso_frame as the base. There can't be any
+ * TDs scheduled for earlier than that.
*/
- excess = (stream->next_uframe - period - next) & (mod - 1);
- if (excess >= mod - 2 * SCHEDULE_SLOP)
- start = next + excess - mod + period *
- DIV_ROUND_UP(mod - excess, period);
- else
- start = next + excess + period;
- if (start - now >= mod) {
- ehci_dbg(ehci, "request %p would overflow (%d+%d >= %d)\n",
- urb, start - now - period, period,
- mod);
- status = -EFBIG;
+ base = ehci->last_iso_frame << 3;
+ next = (next - base) & (mod - 1);
+ start = (stream->next_uframe - base) & (mod - 1);
+
+ /* Is the schedule already full? */
+ if (unlikely(start < period)) {
+ ehci_dbg(ehci, "iso sched full %p (%u-%u < %u mod %u)\n",
+ urb, stream->next_uframe, base,
+ period, mod);
+ status = -ENOSPC;
goto fail;
}
+
+ /* Behind the scheduling threshold? */
+ if (unlikely(start < next)) {
+
+ /* USB_ISO_ASAP: Round up to the first available slot */
+ if (urb->transfer_flags & URB_ISO_ASAP)
+ start += (next - start + period - 1) & -period;
+
+ /*
+ * Not ASAP: Use the next slot in the stream. If
+ * the entire URB falls before the threshold, fail.
+ */
+ else if (start + span - period < next) {
+ ehci_dbg(ehci, "iso urb late %p (%u+%u < %u)\n",
+ urb, start + base,
+ span - period, next + base);
+ status = -EXDEV;
+ goto fail;
+ }
+ }
+
+ start += base;
}
/* need to schedule; when's the next (u)frame we could start?
* this is bigger than ehci->i_thresh allows; scheduling itself
- * isn't free, the slop should handle reasonably slow cpus. it
+ * isn't free, the delay should handle reasonably slow cpus. it
* can also help high bandwidth if the dma and irq loads don't
* jump until after the queue is primed.
*/
else {
int done = 0;
- start = SCHEDULE_SLOP + (now & ~0x07);
- /* NOTE: assumes URB_ISO_ASAP, to limit complexity/bugs */
+ base = now & ~0x07;
+ start = base + SCHEDULING_DELAY;
/* find a uframe slot with enough bandwidth.
* Early uframes are more precious because full-speed
@@ -1464,19 +1451,16 @@
/* no room in the schedule */
if (!done) {
- ehci_dbg(ehci, "iso resched full %p (now %d max %d)\n",
- urb, now, now + mod);
+ ehci_dbg(ehci, "iso sched full %p", urb);
status = -ENOSPC;
goto fail;
}
}
/* Tried to schedule too far into the future? */
- if (unlikely(start - now + span - period
- >= mod - 2 * SCHEDULE_SLOP)) {
- ehci_dbg(ehci, "request %p would overflow (%d+%d >= %d)\n",
- urb, start - now, span - period,
- mod - 2 * SCHEDULE_SLOP);
+ if (unlikely(start - base + span - period >= mod)) {
+ ehci_dbg(ehci, "request %p would overflow (%u+%u >= %u)\n",
+ urb, start - base, span - period, mod);
status = -EFBIG;
goto fail;
}
@@ -1490,7 +1474,7 @@
/* Make sure scan_isoc() sees these */
if (ehci->isoc_count == 0)
- ehci->next_frame = now >> 3;
+ ehci->last_iso_frame = now >> 3;
return 0;
fail:
@@ -1646,7 +1630,7 @@
/* don't need that schedule data any more */
iso_sched_free (stream, iso_sched);
- urb->hcpriv = NULL;
+ urb->hcpriv = stream;
++ehci->isoc_count;
enable_periodic(ehci);
@@ -1708,7 +1692,7 @@
urb->actual_length += desc->actual_length;
} else {
/* URB was too late */
- desc->status = -EXDEV;
+ urb->error_count++;
}
}
@@ -2045,7 +2029,7 @@
/* don't need that schedule data any more */
iso_sched_free (stream, sched);
- urb->hcpriv = NULL;
+ urb->hcpriv = stream;
++ehci->isoc_count;
enable_periodic(ehci);
@@ -2081,7 +2065,7 @@
t = hc32_to_cpup(ehci, &sitd->hw_results);
/* report transfer status */
- if (t & SITD_ERRS) {
+ if (unlikely(t & SITD_ERRS)) {
urb->error_count++;
if (t & SITD_STS_DBE)
desc->status = usb_pipein (urb->pipe)
@@ -2091,6 +2075,9 @@
desc->status = -EOVERFLOW;
else /* XACT, MMF, etc */
desc->status = -EPROTO;
+ } else if (unlikely(t & SITD_STS_ACTIVE)) {
+ /* URB was too late */
+ urb->error_count++;
} else {
desc->status = 0;
desc->actual_length = desc->length - SITD_LENGTH(t);
@@ -2220,16 +2207,16 @@
now_frame = (uf >> 3) & fmask;
live = true;
} else {
- now_frame = (ehci->next_frame - 1) & fmask;
+ now_frame = (ehci->last_iso_frame - 1) & fmask;
live = false;
}
ehci->now_frame = now_frame;
- frame = ehci->next_frame;
for (;;) {
union ehci_shadow q, *q_p;
__hc32 type, *hw_p;
+ frame = ehci->last_iso_frame;
restart:
/* scan each element in frame's queue for completions */
q_p = &ehci->pshadow [frame];
@@ -2334,7 +2321,6 @@
/* Stop when we have reached the current frame */
if (frame == now_frame)
break;
- frame = (frame + 1) & fmask;
+ ehci->last_iso_frame = (frame + 1) & fmask;
}
- ehci->next_frame = now_frame;
}
diff --git a/drivers/usb/host/ehci-sh.c b/drivers/usb/host/ehci-sh.c
index 6081e1e..0c90a24 100644
--- a/drivers/usb/host/ehci-sh.c
+++ b/drivers/usb/host/ehci-sh.c
@@ -21,17 +21,10 @@
static int ehci_sh_reset(struct usb_hcd *hcd)
{
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
- int ret;
ehci->caps = hcd->regs;
- ret = ehci_setup(hcd);
- if (unlikely(ret))
- return ret;
-
- ehci_port_power(ehci, 0);
-
- return ret;
+ return ehci_setup(hcd);
}
static const struct hc_driver ehci_sh_hc_driver = {
diff --git a/drivers/usb/host/ehci-spear.c b/drivers/usb/host/ehci-spear.c
index c718a06..466c1bb 100644
--- a/drivers/usb/host/ehci-spear.c
+++ b/drivers/usb/host/ehci-spear.c
@@ -37,18 +37,11 @@
static int ehci_spear_setup(struct usb_hcd *hcd)
{
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
- int retval = 0;
/* registers start at offset 0x0 */
ehci->caps = hcd->regs;
- retval = ehci_setup(hcd);
- if (retval)
- return retval;
-
- ehci_port_power(ehci, 0);
-
- return retval;
+ return ehci_setup(hcd);
}
static const struct hc_driver ehci_spear_hc_driver = {
@@ -116,8 +109,6 @@
struct clk *usbh_clk;
const struct hc_driver *driver = &ehci_spear_hc_driver;
int irq, retval;
- char clk_name[20] = "usbh_clk";
- static int instance = -1;
if (usb_disabled())
return -ENODEV;
@@ -125,7 +116,7 @@
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
retval = irq;
- goto fail_irq_get;
+ goto fail;
}
/*
@@ -136,47 +127,38 @@
if (!pdev->dev.dma_mask)
pdev->dev.dma_mask = &spear_ehci_dma_mask;
- /*
- * Increment the device instance, when probing via device-tree
- */
- if (pdev->id < 0)
- instance++;
- else
- instance = pdev->id;
- sprintf(clk_name, "usbh.%01d_clk", instance);
-
- usbh_clk = clk_get(NULL, clk_name);
+ usbh_clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(usbh_clk)) {
dev_err(&pdev->dev, "Error getting interface clock\n");
retval = PTR_ERR(usbh_clk);
- goto fail_get_usbh_clk;
+ goto fail;
}
hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
if (!hcd) {
retval = -ENOMEM;
- goto fail_create_hcd;
+ goto fail;
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
retval = -ENODEV;
- goto fail_request_resource;
+ goto err_put_hcd;
}
hcd->rsrc_start = res->start;
hcd->rsrc_len = resource_size(res);
- if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len,
+ if (!devm_request_mem_region(&pdev->dev, hcd->rsrc_start, hcd->rsrc_len,
driver->description)) {
retval = -EBUSY;
- goto fail_request_resource;
+ goto err_put_hcd;
}
- hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
+ hcd->regs = devm_ioremap(&pdev->dev, hcd->rsrc_start, hcd->rsrc_len);
if (hcd->regs == NULL) {
dev_dbg(&pdev->dev, "error mapping memory\n");
retval = -ENOMEM;
- goto fail_ioremap;
+ goto err_put_hcd;
}
ehci = (struct spear_ehci *)hcd_to_ehci(hcd);
@@ -185,21 +167,15 @@
spear_start_ehci(ehci);
retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
if (retval)
- goto fail_add_hcd;
+ goto err_stop_ehci;
return retval;
-fail_add_hcd:
+err_stop_ehci:
spear_stop_ehci(ehci);
- iounmap(hcd->regs);
-fail_ioremap:
- release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-fail_request_resource:
+err_put_hcd:
usb_put_hcd(hcd);
-fail_create_hcd:
- clk_put(usbh_clk);
-fail_get_usbh_clk:
-fail_irq_get:
+fail:
dev_err(&pdev->dev, "init fail, %d\n", retval);
return retval ;
@@ -218,17 +194,12 @@
if (ehci_p->clk)
spear_stop_ehci(ehci_p);
- iounmap(hcd->regs);
- release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
usb_put_hcd(hcd);
- if (ehci_p->clk)
- clk_put(ehci_p->clk);
-
return 0;
}
-static struct of_device_id spear_ehci_id_table[] __devinitdata = {
+static struct of_device_id spear_ehci_id_table[] = {
{ .compatible = "st,spear600-ehci", },
{ },
};
diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c
index 6223d175..acf1755 100644
--- a/drivers/usb/host/ehci-tegra.c
+++ b/drivers/usb/host/ehci-tegra.c
@@ -28,7 +28,10 @@
#include <linux/pm_runtime.h>
#include <linux/usb/tegra_usb_phy.h>
-#include <mach/iomap.h>
+
+#define TEGRA_USB_BASE 0xC5000000
+#define TEGRA_USB2_BASE 0xC5004000
+#define TEGRA_USB3_BASE 0xC5008000
#define TEGRA_USB_DMA_ALIGN 32
@@ -277,7 +280,6 @@
static int tegra_ehci_setup(struct usb_hcd *hcd)
{
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
- int retval;
/* EHCI registers start at offset 0x100 */
ehci->caps = hcd->regs + 0x100;
@@ -285,12 +287,7 @@
/* switch to host mode */
hcd->has_tt = 1;
- retval = ehci_setup(hcd);
- if (retval)
- return retval;
-
- ehci_port_power(ehci, 1);
- return retval;
+ return ehci_setup(hcd);
}
struct dma_aligned_buffer {
@@ -778,9 +775,6 @@
struct tegra_ehci_hcd *tegra = platform_get_drvdata(pdev);
struct usb_hcd *hcd = ehci_to_hcd(tegra->ehci);
- if (tegra == NULL || hcd == NULL)
- return -EINVAL;
-
pm_runtime_get_sync(&pdev->dev);
pm_runtime_disable(&pdev->dev);
pm_runtime_put_noidle(&pdev->dev);
@@ -811,7 +805,7 @@
hcd->driver->shutdown(hcd);
}
-static struct of_device_id tegra_ehci_of_match[] __devinitdata = {
+static struct of_device_id tegra_ehci_of_match[] = {
{ .compatible = "nvidia,tegra20-ehci", },
{ },
};
diff --git a/drivers/usb/host/ehci-vt8500.c b/drivers/usb/host/ehci-vt8500.c
index d3c9a3e..11695d5 100644
--- a/drivers/usb/host/ehci-vt8500.c
+++ b/drivers/usb/host/ehci-vt8500.c
@@ -19,22 +19,6 @@
#include <linux/of.h>
#include <linux/platform_device.h>
-static int ehci_update_device(struct usb_hcd *hcd, struct usb_device *udev)
-{
- struct ehci_hcd *ehci = hcd_to_ehci(hcd);
- int rc = 0;
-
- if (!udev->parent) /* udev is root hub itself, impossible */
- rc = -1;
- /* we only support lpm device connected to root hub yet */
- if (ehci->has_lpm && !udev->parent->parent) {
- rc = ehci_lpm_set_da(ehci, udev->devnum, udev->portnum);
- if (!rc)
- rc = ehci_lpm_check(ehci, udev->portnum);
- }
- return rc;
-}
-
static const struct hc_driver vt8500_ehci_hc_driver = {
.description = hcd_name,
.product_desc = "VT8500 EHCI",
@@ -77,11 +61,6 @@
.relinquish_port = ehci_relinquish_port,
.port_handed_over = ehci_port_handed_over,
- /*
- * call back when device connected and addressed
- */
- .update_device = ehci_update_device,
-
.clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
};
diff --git a/drivers/usb/host/ehci-w90x900.c b/drivers/usb/host/ehci-w90x900.c
index ec59808..59e0e24 100644
--- a/drivers/usb/host/ehci-w90x900.c
+++ b/drivers/usb/host/ehci-w90x900.c
@@ -13,12 +13,12 @@
#include <linux/platform_device.h>
-/*ebable phy0 and phy1 for w90p910*/
+/* enable phy0 and phy1 for w90p910 */
#define ENPHY (0x01<<8)
#define PHY0_CTR (0xA4)
#define PHY1_CTR (0xA8)
-static int __devinit usb_w90x900_probe(const struct hc_driver *driver,
+static int usb_w90x900_probe(const struct hc_driver *driver,
struct platform_device *pdev)
{
struct usb_hcd *hcd;
@@ -147,7 +147,7 @@
.clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
};
-static int __devinit ehci_w90x900_probe(struct platform_device *pdev)
+static int ehci_w90x900_probe(struct platform_device *pdev)
{
if (usb_disabled())
return -ENODEV;
@@ -155,7 +155,7 @@
return usb_w90x900_probe(&ehci_w90x900_hc_driver, pdev);
}
-static int __devexit ehci_w90x900_remove(struct platform_device *pdev)
+static int ehci_w90x900_remove(struct platform_device *pdev)
{
struct usb_hcd *hcd = platform_get_drvdata(pdev);
@@ -166,7 +166,7 @@
static struct platform_driver ehci_hcd_w90x900_driver = {
.probe = ehci_w90x900_probe,
- .remove = __devexit_p(ehci_w90x900_remove),
+ .remove = ehci_w90x900_remove,
.driver = {
.name = "w90x900-ehci",
.owner = THIS_MODULE,
diff --git a/drivers/usb/host/ehci-xilinx-of.c b/drivers/usb/host/ehci-xilinx-of.c
index 6a3f921a..4f285e8 100644
--- a/drivers/usb/host/ehci-xilinx-of.c
+++ b/drivers/usb/host/ehci-xilinx-of.c
@@ -125,7 +125,7 @@
* as HS only or HS/FS only, it checks the configuration in the device tree
* entry, and sets an appropriate value for hcd->has_tt.
*/
-static int __devinit ehci_hcd_xilinx_of_probe(struct platform_device *op)
+static int ehci_hcd_xilinx_of_probe(struct platform_device *op)
{
struct device_node *dn = op->dev.of_node;
struct usb_hcd *hcd;
diff --git a/drivers/usb/host/ehci-xls.c b/drivers/usb/host/ehci-xls.c
deleted file mode 100644
index 8dc6a22..0000000
--- a/drivers/usb/host/ehci-xls.c
+++ /dev/null
@@ -1,142 +0,0 @@
-/*
- * EHCI HCD for Netlogic XLS processors.
- *
- * (C) Copyright 2011 Netlogic Microsystems Inc.
- *
- * Based on various ehci-*.c drivers
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file COPYING in the main directory of this archive for
- * more details.
- */
-
-#include <linux/platform_device.h>
-
-static int ehci_xls_setup(struct usb_hcd *hcd)
-{
- struct ehci_hcd *ehci = hcd_to_ehci(hcd);
-
- ehci->caps = hcd->regs;
-
- return ehci_setup(hcd);
-}
-
-int ehci_xls_probe_internal(const struct hc_driver *driver,
- struct platform_device *pdev)
-{
- struct usb_hcd *hcd;
- struct resource *res;
- int retval, irq;
-
- /* Get our IRQ from an earlier registered Platform Resource */
- irq = platform_get_irq(pdev, 0);
- if (irq < 0) {
- dev_err(&pdev->dev, "Found HC with no IRQ. Check %s setup!\n",
- dev_name(&pdev->dev));
- return -ENODEV;
- }
-
- /* Get our Memory Handle */
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- dev_err(&pdev->dev, "Error: MMIO Handle %s setup!\n",
- dev_name(&pdev->dev));
- return -ENODEV;
- }
- hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
- if (!hcd) {
- retval = -ENOMEM;
- goto err1;
- }
-
- hcd->rsrc_start = res->start;
- hcd->rsrc_len = resource_size(res);
-
- if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len,
- driver->description)) {
- dev_dbg(&pdev->dev, "controller already in use\n");
- retval = -EBUSY;
- goto err2;
- }
- hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
-
- if (hcd->regs == NULL) {
- dev_dbg(&pdev->dev, "error mapping memory\n");
- retval = -EFAULT;
- goto err3;
- }
-
- retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
- if (retval != 0)
- goto err4;
- return retval;
-
-err4:
- iounmap(hcd->regs);
-err3:
- release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-err2:
- usb_put_hcd(hcd);
-err1:
- dev_err(&pdev->dev, "init %s fail, %d\n", dev_name(&pdev->dev),
- retval);
- return retval;
-}
-
-static struct hc_driver ehci_xls_hc_driver = {
- .description = hcd_name,
- .product_desc = "XLS EHCI Host Controller",
- .hcd_priv_size = sizeof(struct ehci_hcd),
- .irq = ehci_irq,
- .flags = HCD_USB2 | HCD_MEMORY,
- .reset = ehci_xls_setup,
- .start = ehci_run,
- .stop = ehci_stop,
- .shutdown = ehci_shutdown,
-
- .urb_enqueue = ehci_urb_enqueue,
- .urb_dequeue = ehci_urb_dequeue,
- .endpoint_disable = ehci_endpoint_disable,
- .endpoint_reset = ehci_endpoint_reset,
-
- .get_frame_number = ehci_get_frame,
-
- .hub_status_data = ehci_hub_status_data,
- .hub_control = ehci_hub_control,
- .bus_suspend = ehci_bus_suspend,
- .bus_resume = ehci_bus_resume,
- .relinquish_port = ehci_relinquish_port,
- .port_handed_over = ehci_port_handed_over,
-
- .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
-};
-
-static int ehci_xls_probe(struct platform_device *pdev)
-{
- if (usb_disabled())
- return -ENODEV;
-
- return ehci_xls_probe_internal(&ehci_xls_hc_driver, pdev);
-}
-
-static int ehci_xls_remove(struct platform_device *pdev)
-{
- struct usb_hcd *hcd = platform_get_drvdata(pdev);
-
- usb_remove_hcd(hcd);
- iounmap(hcd->regs);
- release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
- usb_put_hcd(hcd);
- return 0;
-}
-
-MODULE_ALIAS("ehci-xls");
-
-static struct platform_driver ehci_xls_driver = {
- .probe = ehci_xls_probe,
- .remove = ehci_xls_remove,
- .shutdown = usb_hcd_platform_shutdown,
- .driver = {
- .name = "ehci-xls",
- },
-};
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index da07d98..9dadc71 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -143,7 +143,7 @@
struct ehci_qh *intr_unlink_last;
unsigned intr_unlink_cycle;
unsigned now_frame; /* frame from HC hardware */
- unsigned next_frame; /* scan periodic, start here */
+ unsigned last_iso_frame; /* last frame scanned for iso */
unsigned intr_count; /* intr activity count */
unsigned isoc_count; /* isoc activity count */
unsigned periodic_count; /* periodic activity count */
@@ -193,7 +193,6 @@
unsigned has_amcc_usb23:1;
unsigned need_io_watchdog:1;
unsigned amd_pll_fix:1;
- unsigned fs_i_thresh:1; /* Intel iso scheduling */
unsigned use_dummy_qh:1; /* AMD Frame List table quirk*/
unsigned has_synopsys_hc_bug:1; /* Synopsys HC */
unsigned frame_index_bug:1; /* MosChip (AKA NetMos) */
@@ -207,7 +206,6 @@
#define OHCI_HCCTRL_LEN 0x4
__hc32 *ohci_hcctrl_reg;
unsigned has_hostpc:1;
- unsigned has_lpm:1; /* support link power management */
unsigned has_ppcd:1; /* support per-port change bits */
u8 sbrn; /* packed release number */
@@ -762,26 +760,41 @@
/*-------------------------------------------------------------------------*/
-#ifdef CONFIG_PCI
+#define ehci_dbg(ehci, fmt, args...) \
+ dev_dbg(ehci_to_hcd(ehci)->self.controller , fmt , ## args)
+#define ehci_err(ehci, fmt, args...) \
+ dev_err(ehci_to_hcd(ehci)->self.controller , fmt , ## args)
+#define ehci_info(ehci, fmt, args...) \
+ dev_info(ehci_to_hcd(ehci)->self.controller , fmt , ## args)
+#define ehci_warn(ehci, fmt, args...) \
+ dev_warn(ehci_to_hcd(ehci)->self.controller , fmt , ## args)
-/* For working around the MosChip frame-index-register bug */
-static unsigned ehci_read_frame_index(struct ehci_hcd *ehci);
-
+#ifdef VERBOSE_DEBUG
+# define ehci_vdbg ehci_dbg
#else
-
-static inline unsigned ehci_read_frame_index(struct ehci_hcd *ehci)
-{
- return ehci_readl(ehci, &ehci->regs->frame_index);
-}
-
+ static inline void ehci_vdbg(struct ehci_hcd *ehci, ...) {}
#endif
-/*-------------------------------------------------------------------------*/
-
#ifndef DEBUG
#define STUB_DEBUG_FILES
#endif /* DEBUG */
/*-------------------------------------------------------------------------*/
+/* Declarations of things exported for use by ehci platform drivers */
+
+struct ehci_driver_overrides {
+ size_t extra_priv_size;
+ int (*reset)(struct usb_hcd *hcd);
+};
+
+extern void ehci_init_driver(struct hc_driver *drv,
+ const struct ehci_driver_overrides *over);
+extern int ehci_setup(struct usb_hcd *hcd);
+
+#ifdef CONFIG_PM
+extern int ehci_suspend(struct usb_hcd *hcd, bool do_wakeup);
+extern int ehci_resume(struct usb_hcd *hcd, bool hibernated);
+#endif /* CONFIG_PM */
+
#endif /* __LINUX_EHCI_HCD_H */
diff --git a/drivers/usb/host/fhci-hcd.c b/drivers/usb/host/fhci-hcd.c
index 7da1a26..0b4654259 100644
--- a/drivers/usb/host/fhci-hcd.c
+++ b/drivers/usb/host/fhci-hcd.c
@@ -561,7 +561,7 @@
.hub_control = fhci_hub_control,
};
-static int __devinit of_fhci_probe(struct platform_device *ofdev)
+static int of_fhci_probe(struct platform_device *ofdev)
{
struct device *dev = &ofdev->dev;
struct device_node *node = dev->of_node;
@@ -780,7 +780,7 @@
return ret;
}
-static int __devexit fhci_remove(struct device *dev)
+static int fhci_remove(struct device *dev)
{
struct usb_hcd *hcd = dev_get_drvdata(dev);
struct fhci_hcd *fhci = hcd_to_fhci(hcd);
@@ -803,7 +803,7 @@
return 0;
}
-static int __devexit of_fhci_remove(struct platform_device *ofdev)
+static int of_fhci_remove(struct platform_device *ofdev)
{
return fhci_remove(&ofdev->dev);
}
@@ -821,7 +821,7 @@
.of_match_table = of_fhci_match,
},
.probe = of_fhci_probe,
- .remove = __devexit_p(of_fhci_remove),
+ .remove = of_fhci_remove,
};
module_platform_driver(of_fhci_driver);
diff --git a/drivers/usb/host/fsl-mph-dr-of.c b/drivers/usb/host/fsl-mph-dr-of.c
index 1e77129..5105127 100644
--- a/drivers/usb/host/fsl-mph-dr-of.c
+++ b/drivers/usb/host/fsl-mph-dr-of.c
@@ -24,7 +24,7 @@
enum fsl_usb2_operating_modes op_mode; /* operating mode */
};
-struct fsl_usb2_dev_data dr_mode_data[] __devinitdata = {
+struct fsl_usb2_dev_data dr_mode_data[] = {
{
.dr_mode = "host",
.drivers = { "fsl-ehci", NULL, NULL, },
@@ -42,7 +42,7 @@
},
};
-struct fsl_usb2_dev_data * __devinit get_dr_mode_data(struct device_node *np)
+struct fsl_usb2_dev_data *get_dr_mode_data(struct device_node *np)
{
const unsigned char *prop;
int i;
@@ -59,7 +59,7 @@
return &dr_mode_data[0]; /* mode not specified, use host */
}
-static enum fsl_usb2_phy_modes __devinit determine_usb_phy(const char *phy_type)
+static enum fsl_usb2_phy_modes determine_usb_phy(const char *phy_type)
{
if (!phy_type)
return FSL_USB2_PHY_NONE;
@@ -75,7 +75,7 @@
return FSL_USB2_PHY_NONE;
}
-struct platform_device * __devinit fsl_usb2_device_register(
+struct platform_device *fsl_usb2_device_register(
struct platform_device *ofdev,
struct fsl_usb2_platform_data *pdata,
const char *name, int id)
@@ -154,7 +154,7 @@
return ver;
}
-static int __devinit fsl_usb2_mph_dr_of_probe(struct platform_device *ofdev)
+static int fsl_usb2_mph_dr_of_probe(struct platform_device *ofdev)
{
struct device_node *np = ofdev->dev.of_node;
struct platform_device *usb_dev;
@@ -224,13 +224,13 @@
return 0;
}
-static int __devexit __unregister_subdev(struct device *dev, void *d)
+static int __unregister_subdev(struct device *dev, void *d)
{
platform_device_unregister(to_platform_device(dev));
return 0;
}
-static int __devexit fsl_usb2_mph_dr_of_remove(struct platform_device *ofdev)
+static int fsl_usb2_mph_dr_of_remove(struct platform_device *ofdev)
{
device_for_each_child(&ofdev->dev, NULL, __unregister_subdev);
return 0;
@@ -336,7 +336,7 @@
.of_match_table = fsl_usb2_mph_dr_of_match,
},
.probe = fsl_usb2_mph_dr_of_probe,
- .remove = __devexit_p(fsl_usb2_mph_dr_of_remove),
+ .remove = fsl_usb2_mph_dr_of_remove,
};
module_platform_driver(fsl_usb2_mph_dr_driver);
diff --git a/drivers/usb/host/imx21-hcd.c b/drivers/usb/host/imx21-hcd.c
index f19e269..bd6a744 100644
--- a/drivers/usb/host/imx21-hcd.c
+++ b/drivers/usb/host/imx21-hcd.c
@@ -1680,7 +1680,7 @@
return 0;
}
-static int __devinit imx21_hc_start(struct usb_hcd *hcd)
+static int imx21_hc_start(struct usb_hcd *hcd)
{
struct imx21 *imx21 = hcd_to_imx21(hcd);
unsigned long flags;
diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c
index 9e65e30..b64e661 100644
--- a/drivers/usb/host/isp116x-hcd.c
+++ b/drivers/usb/host/isp116x-hcd.c
@@ -1557,7 +1557,7 @@
return 0;
}
-static int __devinit isp116x_probe(struct platform_device *pdev)
+static int isp116x_probe(struct platform_device *pdev)
{
struct usb_hcd *hcd;
struct isp116x *isp116x;
diff --git a/drivers/usb/host/isp1362-hcd.c b/drivers/usb/host/isp1362-hcd.c
index 2563263..974480c 100644
--- a/drivers/usb/host/isp1362-hcd.c
+++ b/drivers/usb/host/isp1362-hcd.c
@@ -2645,7 +2645,7 @@
/*-------------------------------------------------------------------------*/
-static int __devexit isp1362_remove(struct platform_device *pdev)
+static int isp1362_remove(struct platform_device *pdev)
{
struct usb_hcd *hcd = platform_get_drvdata(pdev);
struct isp1362_hcd *isp1362_hcd = hcd_to_isp1362_hcd(hcd);
@@ -2680,7 +2680,7 @@
return 0;
}
-static int __devinit isp1362_probe(struct platform_device *pdev)
+static int isp1362_probe(struct platform_device *pdev)
{
struct usb_hcd *hcd;
struct isp1362_hcd *isp1362_hcd;
@@ -2856,7 +2856,7 @@
static struct platform_driver isp1362_driver = {
.probe = isp1362_probe,
- .remove = __devexit_p(isp1362_remove),
+ .remove = isp1362_remove,
.suspend = isp1362_suspend,
.resume = isp1362_resume,
diff --git a/drivers/usb/host/isp1760-if.c b/drivers/usb/host/isp1760-if.c
index fff114f..bbb791b 100644
--- a/drivers/usb/host/isp1760-if.c
+++ b/drivers/usb/host/isp1760-if.c
@@ -43,7 +43,6 @@
struct device_node *dp = dev->dev.of_node;
struct resource *res;
struct resource memory;
- struct of_irq oirq;
int virq;
resource_size_t res_len;
int ret;
@@ -69,14 +68,12 @@
goto free_data;
}
- if (of_irq_map_one(dp, 0, &oirq)) {
+ virq = irq_of_parse_and_map(dp, 0);
+ if (!virq) {
ret = -ENODEV;
goto release_reg;
}
- virq = irq_create_of_mapping(oirq.controller, oirq.specifier,
- oirq.size);
-
if (of_device_is_compatible(dp, "nxp,usb-isp1761"))
devflags |= ISP1760_FLAG_ISP1761;
@@ -175,7 +172,7 @@
#endif
#ifdef CONFIG_PCI
-static int __devinit isp1761_pci_probe(struct pci_dev *dev,
+static int isp1761_pci_probe(struct pci_dev *dev,
const struct pci_device_id *id)
{
u8 latency, limit;
@@ -349,7 +346,7 @@
};
#endif
-static int __devinit isp1760_plat_probe(struct platform_device *pdev)
+static int isp1760_plat_probe(struct platform_device *pdev)
{
int ret = 0;
struct usb_hcd *hcd;
@@ -416,7 +413,7 @@
return ret;
}
-static int __devexit isp1760_plat_remove(struct platform_device *pdev)
+static int isp1760_plat_remove(struct platform_device *pdev)
{
struct resource *mem_res;
resource_size_t mem_size;
@@ -435,7 +432,7 @@
static struct platform_driver isp1760_plat_driver = {
.probe = isp1760_plat_probe,
- .remove = __devexit_p(isp1760_plat_remove),
+ .remove = isp1760_plat_remove,
.driver = {
.name = "isp1760",
},
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index 0bf72f9..221850a 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -94,7 +94,7 @@
/*-------------------------------------------------------------------------*/
-static void __devexit usb_hcd_at91_remove (struct usb_hcd *, struct platform_device *);
+static void usb_hcd_at91_remove (struct usb_hcd *, struct platform_device *);
/* configure so an HC device and id are always provided */
/* always called with process context; sleeping is OK */
@@ -108,7 +108,7 @@
* then invokes the start() method for the HCD associated with it
* through the hotplug entry's driver_data.
*/
-static int __devinit usb_hcd_at91_probe(const struct hc_driver *driver,
+static int usb_hcd_at91_probe(const struct hc_driver *driver,
struct platform_device *pdev)
{
int retval;
@@ -203,7 +203,7 @@
* context, "rmmod" or something similar.
*
*/
-static void __devexit usb_hcd_at91_remove(struct usb_hcd *hcd,
+static void usb_hcd_at91_remove(struct usb_hcd *hcd,
struct platform_device *pdev)
{
usb_remove_hcd(hcd);
@@ -222,7 +222,7 @@
/*-------------------------------------------------------------------------*/
-static int __devinit
+static int
ohci_at91_reset (struct usb_hcd *hcd)
{
struct at91_usbh_data *board = hcd->self.controller->platform_data;
@@ -236,7 +236,7 @@
return 0;
}
-static int __devinit
+static int
ohci_at91_start (struct usb_hcd *hcd)
{
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
@@ -506,7 +506,7 @@
static u64 at91_ohci_dma_mask = DMA_BIT_MASK(32);
-static int __devinit ohci_at91_of_init(struct platform_device *pdev)
+static int ohci_at91_of_init(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
int i, gpio;
@@ -548,7 +548,7 @@
return 0;
}
#else
-static int __devinit ohci_at91_of_init(struct platform_device *pdev)
+static int ohci_at91_of_init(struct platform_device *pdev)
{
return 0;
}
@@ -556,7 +556,7 @@
/*-------------------------------------------------------------------------*/
-static int __devinit ohci_hcd_at91_drv_probe(struct platform_device *pdev)
+static int ohci_hcd_at91_drv_probe(struct platform_device *pdev)
{
struct at91_usbh_data *pdata;
int i;
@@ -641,7 +641,7 @@
return usb_hcd_at91_probe(&ohci_at91_hc_driver, pdev);
}
-static int __devexit ohci_hcd_at91_drv_remove(struct platform_device *pdev)
+static int ohci_hcd_at91_drv_remove(struct platform_device *pdev)
{
struct at91_usbh_data *pdata = pdev->dev.platform_data;
int i;
@@ -705,7 +705,7 @@
if (!clocked)
at91_start_clock();
- ohci_finish_controller_resume(hcd);
+ ohci_resume(hcd, false);
return 0;
}
#else
@@ -717,7 +717,7 @@
static struct platform_driver ohci_hcd_at91_driver = {
.probe = ohci_hcd_at91_drv_probe,
- .remove = __devexit_p(ohci_hcd_at91_drv_remove),
+ .remove = ohci_hcd_at91_drv_remove,
.shutdown = usb_hcd_platform_shutdown,
.suspend = ohci_hcd_at91_drv_suspend,
.resume = ohci_hcd_at91_drv_resume,
diff --git a/drivers/usb/host/ohci-au1xxx.c b/drivers/usb/host/ohci-au1xxx.c
deleted file mode 100644
index c611699..0000000
--- a/drivers/usb/host/ohci-au1xxx.c
+++ /dev/null
@@ -1,234 +0,0 @@
-/*
- * OHCI HCD (Host Controller Driver) for USB.
- *
- * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
- * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
- * (C) Copyright 2002 Hewlett-Packard Company
- *
- * Bus Glue for AMD Alchemy Au1xxx
- *
- * Written by Christopher Hoover <ch@hpl.hp.com>
- * Based on fragments of previous driver by Russell King et al.
- *
- * Modified for LH7A404 from ohci-sa1111.c
- * by Durgesh Pattamatta <pattamattad@sharpsec.com>
- * Modified for AMD Alchemy Au1xxx
- * by Matt Porter <mporter@kernel.crashing.org>
- *
- * This file is licenced under the GPL.
- */
-
-#include <linux/platform_device.h>
-#include <linux/signal.h>
-
-#include <asm/mach-au1x00/au1000.h>
-
-
-extern int usb_disabled(void);
-
-static int __devinit ohci_au1xxx_start(struct usb_hcd *hcd)
-{
- struct ohci_hcd *ohci = hcd_to_ohci(hcd);
- int ret;
-
- ohci_dbg(ohci, "ohci_au1xxx_start, ohci:%p", ohci);
-
- if ((ret = ohci_init(ohci)) < 0)
- return ret;
-
- if ((ret = ohci_run(ohci)) < 0) {
- dev_err(hcd->self.controller, "can't start %s",
- hcd->self.bus_name);
- ohci_stop(hcd);
- return ret;
- }
-
- return 0;
-}
-
-static const struct hc_driver ohci_au1xxx_hc_driver = {
- .description = hcd_name,
- .product_desc = "Au1xxx OHCI",
- .hcd_priv_size = sizeof(struct ohci_hcd),
-
- /*
- * generic hardware linkage
- */
- .irq = ohci_irq,
- .flags = HCD_USB11 | HCD_MEMORY,
-
- /*
- * basic lifecycle operations
- */
- .start = ohci_au1xxx_start,
- .stop = ohci_stop,
- .shutdown = ohci_shutdown,
-
- /*
- * managing i/o requests and associated device resources
- */
- .urb_enqueue = ohci_urb_enqueue,
- .urb_dequeue = ohci_urb_dequeue,
- .endpoint_disable = ohci_endpoint_disable,
-
- /*
- * scheduling support
- */
- .get_frame_number = ohci_get_frame,
-
- /*
- * root hub support
- */
- .hub_status_data = ohci_hub_status_data,
- .hub_control = ohci_hub_control,
-#ifdef CONFIG_PM
- .bus_suspend = ohci_bus_suspend,
- .bus_resume = ohci_bus_resume,
-#endif
- .start_port_reset = ohci_start_port_reset,
-};
-
-static int ohci_hcd_au1xxx_drv_probe(struct platform_device *pdev)
-{
- int ret, unit;
- struct usb_hcd *hcd;
-
- if (usb_disabled())
- return -ENODEV;
-
- if (pdev->resource[1].flags != IORESOURCE_IRQ) {
- pr_debug("resource[1] is not IORESOURCE_IRQ\n");
- return -ENOMEM;
- }
-
- hcd = usb_create_hcd(&ohci_au1xxx_hc_driver, &pdev->dev, "au1xxx");
- if (!hcd)
- return -ENOMEM;
-
- hcd->rsrc_start = pdev->resource[0].start;
- hcd->rsrc_len = pdev->resource[0].end - pdev->resource[0].start + 1;
-
- if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
- pr_debug("request_mem_region failed\n");
- ret = -EBUSY;
- goto err1;
- }
-
- hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
- if (!hcd->regs) {
- pr_debug("ioremap failed\n");
- ret = -ENOMEM;
- goto err2;
- }
-
- unit = (hcd->rsrc_start == AU1300_USB_OHCI1_PHYS_ADDR) ?
- ALCHEMY_USB_OHCI1 : ALCHEMY_USB_OHCI0;
- if (alchemy_usb_control(unit, 1)) {
- printk(KERN_INFO "%s: controller init failed!\n", pdev->name);
- ret = -ENODEV;
- goto err3;
- }
-
- ohci_hcd_init(hcd_to_ohci(hcd));
-
- ret = usb_add_hcd(hcd, pdev->resource[1].start,
- IRQF_SHARED);
- if (ret == 0) {
- platform_set_drvdata(pdev, hcd);
- return ret;
- }
-
- alchemy_usb_control(unit, 0);
-err3:
- iounmap(hcd->regs);
-err2:
- release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-err1:
- usb_put_hcd(hcd);
- return ret;
-}
-
-static int ohci_hcd_au1xxx_drv_remove(struct platform_device *pdev)
-{
- struct usb_hcd *hcd = platform_get_drvdata(pdev);
- int unit;
-
- unit = (hcd->rsrc_start == AU1300_USB_OHCI1_PHYS_ADDR) ?
- ALCHEMY_USB_OHCI1 : ALCHEMY_USB_OHCI0;
- usb_remove_hcd(hcd);
- alchemy_usb_control(unit, 0);
- iounmap(hcd->regs);
- release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
- usb_put_hcd(hcd);
- platform_set_drvdata(pdev, NULL);
-
- return 0;
-}
-
-#ifdef CONFIG_PM
-static int ohci_hcd_au1xxx_drv_suspend(struct device *dev)
-{
- struct usb_hcd *hcd = dev_get_drvdata(dev);
- struct ohci_hcd *ohci = hcd_to_ohci(hcd);
- unsigned long flags;
- int rc;
-
- rc = 0;
-
- /* Root hub was already suspended. Disable irq emission and
- * mark HW unaccessible, bail out if RH has been resumed. Use
- * the spinlock to properly synchronize with possible pending
- * RH suspend or resume activity.
- */
- spin_lock_irqsave(&ohci->lock, flags);
- if (ohci->rh_state != OHCI_RH_SUSPENDED) {
- rc = -EINVAL;
- goto bail;
- }
- ohci_writel(ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable);
- (void)ohci_readl(ohci, &ohci->regs->intrdisable);
-
- clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
-
- alchemy_usb_control(ALCHEMY_USB_OHCI0, 0);
-bail:
- spin_unlock_irqrestore(&ohci->lock, flags);
-
- return rc;
-}
-
-static int ohci_hcd_au1xxx_drv_resume(struct device *dev)
-{
- struct usb_hcd *hcd = dev_get_drvdata(dev);
-
- alchemy_usb_control(ALCHEMY_USB_OHCI0, 1);
-
- set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
- ohci_finish_controller_resume(hcd);
-
- return 0;
-}
-
-static const struct dev_pm_ops au1xxx_ohci_pmops = {
- .suspend = ohci_hcd_au1xxx_drv_suspend,
- .resume = ohci_hcd_au1xxx_drv_resume,
-};
-
-#define AU1XXX_OHCI_PMOPS &au1xxx_ohci_pmops
-
-#else
-#define AU1XXX_OHCI_PMOPS NULL
-#endif
-
-static struct platform_driver ohci_hcd_au1xxx_driver = {
- .probe = ohci_hcd_au1xxx_drv_probe,
- .remove = ohci_hcd_au1xxx_drv_remove,
- .shutdown = usb_hcd_platform_shutdown,
- .driver = {
- .name = "au1xxx-ohci",
- .owner = THIS_MODULE,
- .pm = AU1XXX_OHCI_PMOPS,
- },
-};
-
-MODULE_ALIAS("platform:au1xxx-ohci");
diff --git a/drivers/usb/host/ohci-cns3xxx.c b/drivers/usb/host/ohci-cns3xxx.c
deleted file mode 100644
index 2c9f233..0000000
--- a/drivers/usb/host/ohci-cns3xxx.c
+++ /dev/null
@@ -1,166 +0,0 @@
-/*
- * Copyright 2008 Cavium Networks
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License, Version 2, as
- * published by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/atomic.h>
-#include <mach/cns3xxx.h>
-#include <mach/pm.h>
-
-static int __devinit
-cns3xxx_ohci_start(struct usb_hcd *hcd)
-{
- struct ohci_hcd *ohci = hcd_to_ohci(hcd);
- int ret;
-
- /*
- * EHCI and OHCI share the same clock and power,
- * resetting twice would cause the 1st controller been reset.
- * Therefore only do power up at the first up device, and
- * power down at the last down device.
- *
- * Set USB AHB INCR length to 16
- */
- if (atomic_inc_return(&usb_pwr_ref) == 1) {
- cns3xxx_pwr_power_up(1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_USB);
- cns3xxx_pwr_clk_en(1 << PM_CLK_GATE_REG_OFFSET_USB_HOST);
- cns3xxx_pwr_soft_rst(1 << PM_SOFT_RST_REG_OFFST_USB_HOST);
- __raw_writel((__raw_readl(MISC_CHIP_CONFIG_REG) | (0X2 << 24)),
- MISC_CHIP_CONFIG_REG);
- }
-
- ret = ohci_init(ohci);
- if (ret < 0)
- return ret;
-
- ohci->num_ports = 1;
-
- ret = ohci_run(ohci);
- if (ret < 0) {
- dev_err(hcd->self.controller, "can't start %s\n",
- hcd->self.bus_name);
- ohci_stop(hcd);
- return ret;
- }
- return 0;
-}
-
-static const struct hc_driver cns3xxx_ohci_hc_driver = {
- .description = hcd_name,
- .product_desc = "CNS3XXX OHCI Host controller",
- .hcd_priv_size = sizeof(struct ohci_hcd),
- .irq = ohci_irq,
- .flags = HCD_USB11 | HCD_MEMORY,
- .start = cns3xxx_ohci_start,
- .stop = ohci_stop,
- .shutdown = ohci_shutdown,
- .urb_enqueue = ohci_urb_enqueue,
- .urb_dequeue = ohci_urb_dequeue,
- .endpoint_disable = ohci_endpoint_disable,
- .get_frame_number = ohci_get_frame,
- .hub_status_data = ohci_hub_status_data,
- .hub_control = ohci_hub_control,
-#ifdef CONFIG_PM
- .bus_suspend = ohci_bus_suspend,
- .bus_resume = ohci_bus_resume,
-#endif
- .start_port_reset = ohci_start_port_reset,
-};
-
-static int cns3xxx_ohci_probe(struct platform_device *pdev)
-{
- struct device *dev = &pdev->dev;
- struct usb_hcd *hcd;
- const struct hc_driver *driver = &cns3xxx_ohci_hc_driver;
- struct resource *res;
- int irq;
- int retval;
-
- if (usb_disabled())
- return -ENODEV;
-
- res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
- if (!res) {
- dev_err(dev, "Found HC with no IRQ.\n");
- return -ENODEV;
- }
- irq = res->start;
-
- hcd = usb_create_hcd(driver, dev, dev_name(dev));
- if (!hcd)
- return -ENOMEM;
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- dev_err(dev, "Found HC with no register addr.\n");
- retval = -ENODEV;
- goto err1;
- }
- hcd->rsrc_start = res->start;
- hcd->rsrc_len = resource_size(res);
-
- if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len,
- driver->description)) {
- dev_dbg(dev, "controller already in use\n");
- retval = -EBUSY;
- goto err1;
- }
-
- hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
- if (!hcd->regs) {
- dev_dbg(dev, "error mapping memory\n");
- retval = -EFAULT;
- goto err2;
- }
-
- ohci_hcd_init(hcd_to_ohci(hcd));
-
- retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
- if (retval == 0)
- return retval;
-
- iounmap(hcd->regs);
-err2:
- release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-err1:
- usb_put_hcd(hcd);
- return retval;
-}
-
-static int cns3xxx_ohci_remove(struct platform_device *pdev)
-{
- struct usb_hcd *hcd = platform_get_drvdata(pdev);
-
- usb_remove_hcd(hcd);
- iounmap(hcd->regs);
- release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-
- /*
- * EHCI and OHCI share the same clock and power,
- * resetting twice would cause the 1st controller been reset.
- * Therefore only do power up at the first up device, and
- * power down at the last down device.
- */
- if (atomic_dec_return(&usb_pwr_ref) == 0)
- cns3xxx_pwr_clk_dis(1 << PM_CLK_GATE_REG_OFFSET_USB_HOST);
-
- usb_put_hcd(hcd);
-
- platform_set_drvdata(pdev, NULL);
-
- return 0;
-}
-
-MODULE_ALIAS("platform:cns3xxx-ohci");
-
-static struct platform_driver ohci_hcd_cns3xxx_driver = {
- .probe = cns3xxx_ohci_probe,
- .remove = cns3xxx_ohci_remove,
- .driver = {
- .name = "cns3xxx-ohci",
- },
-};
diff --git a/drivers/usb/host/ohci-ep93xx.c b/drivers/usb/host/ohci-ep93xx.c
index dbfbd1d..8704e9f 100644
--- a/drivers/usb/host/ohci-ep93xx.c
+++ b/drivers/usb/host/ohci-ep93xx.c
@@ -107,7 +107,7 @@
usb_put_hcd(hcd);
}
-static int __devinit ohci_ep93xx_start(struct usb_hcd *hcd)
+static int ohci_ep93xx_start(struct usb_hcd *hcd)
{
struct ohci_hcd *ohci = hcd_to_ohci(hcd);
int ret;
@@ -194,7 +194,7 @@
ep93xx_start_hc(&pdev->dev);
- ohci_finish_controller_resume(hcd);
+ ohci_resume(hcd, false);
return 0;
}
#endif
diff --git a/drivers/usb/host/ohci-exynos.c b/drivers/usb/host/ohci-exynos.c
index 20a5008..aa3b884 100644
--- a/drivers/usb/host/ohci-exynos.c
+++ b/drivers/usb/host/ohci-exynos.c
@@ -23,6 +23,11 @@
struct clk *clk;
};
+static int ohci_exynos_reset(struct usb_hcd *hcd)
+{
+ return ohci_init(hcd_to_ohci(hcd));
+}
+
static int ohci_exynos_start(struct usb_hcd *hcd)
{
struct ohci_hcd *ohci = hcd_to_ohci(hcd);
@@ -30,10 +35,6 @@
ohci_dbg(ohci, "ohci_exynos_start, ohci:%p", ohci);
- ret = ohci_init(ohci);
- if (ret < 0)
- return ret;
-
ret = ohci_run(ohci);
if (ret < 0) {
dev_err(hcd->self.controller, "can't start %s\n",
@@ -53,6 +54,7 @@
.irq = ohci_irq,
.flags = HCD_MEMORY|HCD_USB11,
+ .reset = ohci_exynos_reset,
.start = ohci_exynos_start,
.stop = ohci_stop,
.shutdown = ohci_shutdown,
@@ -74,7 +76,7 @@
static u64 ohci_exynos_dma_mask = DMA_BIT_MASK(32);
-static int __devinit exynos_ohci_probe(struct platform_device *pdev)
+static int exynos_ohci_probe(struct platform_device *pdev)
{
struct exynos4_ohci_platdata *pdata;
struct exynos_ohci_hcd *exynos_ohci;
@@ -115,7 +117,7 @@
}
exynos_ohci->hcd = hcd;
- exynos_ohci->clk = clk_get(&pdev->dev, "usbhost");
+ exynos_ohci->clk = devm_clk_get(&pdev->dev, "usbhost");
if (IS_ERR(exynos_ohci->clk)) {
dev_err(&pdev->dev, "Failed to get usbhost clock\n");
@@ -123,9 +125,9 @@
goto fail_clk;
}
- err = clk_enable(exynos_ohci->clk);
+ err = clk_prepare_enable(exynos_ohci->clk);
if (err)
- goto fail_clken;
+ goto fail_clk;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
@@ -167,15 +169,13 @@
return 0;
fail_io:
- clk_disable(exynos_ohci->clk);
-fail_clken:
- clk_put(exynos_ohci->clk);
+ clk_disable_unprepare(exynos_ohci->clk);
fail_clk:
usb_put_hcd(hcd);
return err;
}
-static int __devexit exynos_ohci_remove(struct platform_device *pdev)
+static int exynos_ohci_remove(struct platform_device *pdev)
{
struct exynos4_ohci_platdata *pdata = pdev->dev.platform_data;
struct exynos_ohci_hcd *exynos_ohci = platform_get_drvdata(pdev);
@@ -186,8 +186,7 @@
if (pdata && pdata->phy_exit)
pdata->phy_exit(pdev, S5P_USB_PHY_HOST);
- clk_disable(exynos_ohci->clk);
- clk_put(exynos_ohci->clk);
+ clk_disable_unprepare(exynos_ohci->clk);
usb_put_hcd(hcd);
@@ -232,7 +231,7 @@
if (pdata && pdata->phy_exit)
pdata->phy_exit(pdev, S5P_USB_PHY_HOST);
- clk_disable(exynos_ohci->clk);
+ clk_disable_unprepare(exynos_ohci->clk);
fail:
spin_unlock_irqrestore(&ohci->lock, flags);
@@ -247,15 +246,12 @@
struct platform_device *pdev = to_platform_device(dev);
struct exynos4_ohci_platdata *pdata = pdev->dev.platform_data;
- clk_enable(exynos_ohci->clk);
+ clk_prepare_enable(exynos_ohci->clk);
if (pdata && pdata->phy_init)
pdata->phy_init(pdev, S5P_USB_PHY_HOST);
- /* Mark hardware accessible again as we are out of D3 state by now */
- set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
-
- ohci_finish_controller_resume(hcd);
+ ohci_resume(hcd, false);
return 0;
}
@@ -279,7 +275,7 @@
static struct platform_driver exynos_ohci_driver = {
.probe = exynos_ohci_probe,
- .remove = __devexit_p(exynos_ohci_remove),
+ .remove = exynos_ohci_remove,
.shutdown = exynos_ohci_shutdown,
.driver = {
.name = "exynos-ohci",
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 4a1d64d..180a2b0 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -231,13 +231,41 @@
frame &= ~(ed->interval - 1);
frame |= ed->branch;
urb->start_frame = frame;
-
- /* yes, only URB_ISO_ASAP is supported, and
- * urb->start_frame is never used as input.
- */
}
- } else if (ed->type == PIPE_ISOCHRONOUS)
- urb->start_frame = ed->last_iso + ed->interval;
+ } else if (ed->type == PIPE_ISOCHRONOUS) {
+ u16 next = ohci_frame_no(ohci) + 2;
+ u16 frame = ed->last_iso + ed->interval;
+
+ /* Behind the scheduling threshold? */
+ if (unlikely(tick_before(frame, next))) {
+
+ /* USB_ISO_ASAP: Round up to the first available slot */
+ if (urb->transfer_flags & URB_ISO_ASAP)
+ frame += (next - frame + ed->interval - 1) &
+ -ed->interval;
+
+ /*
+ * Not ASAP: Use the next slot in the stream. If
+ * the entire URB falls before the threshold, fail.
+ */
+ else if (tick_before(frame + ed->interval *
+ (urb->number_of_packets - 1), next)) {
+ retval = -EXDEV;
+ usb_hcd_unlink_urb_from_ep(hcd, urb);
+ goto fail;
+ }
+
+ /*
+ * Some OHCI hardware doesn't handle late TDs
+ * correctly. After retiring them it proceeds to
+ * the next ED instead of the next TD. Therefore
+ * we have to omit the late TDs entirely.
+ */
+ urb_priv->td_cnt = DIV_ROUND_UP(next - frame,
+ ed->interval);
+ }
+ urb->start_frame = frame;
+ }
/* fill the TDs and link them to the ed; and
* enable that part of the schedule, if needed
@@ -983,6 +1011,79 @@
#endif
+#ifdef CONFIG_PM
+
+static int __maybe_unused ohci_suspend(struct usb_hcd *hcd, bool do_wakeup)
+{
+ struct ohci_hcd *ohci = hcd_to_ohci (hcd);
+ unsigned long flags;
+
+ /* Disable irq emission and mark HW unaccessible. Use
+ * the spinlock to properly synchronize with possible pending
+ * RH suspend or resume activity.
+ */
+ spin_lock_irqsave (&ohci->lock, flags);
+ ohci_writel(ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable);
+ (void)ohci_readl(ohci, &ohci->regs->intrdisable);
+
+ clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+ spin_unlock_irqrestore (&ohci->lock, flags);
+
+ return 0;
+}
+
+
+static int __maybe_unused ohci_resume(struct usb_hcd *hcd, bool hibernated)
+{
+ struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+ int port;
+ bool need_reinit = false;
+
+ set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+
+ /* Make sure resume from hibernation re-enumerates everything */
+ if (hibernated)
+ ohci_usb_reset(ohci);
+
+ /* See if the controller is already running or has been reset */
+ ohci->hc_control = ohci_readl(ohci, &ohci->regs->control);
+ if (ohci->hc_control & (OHCI_CTRL_IR | OHCI_SCHED_ENABLES)) {
+ need_reinit = true;
+ } else {
+ switch (ohci->hc_control & OHCI_CTRL_HCFS) {
+ case OHCI_USB_OPER:
+ case OHCI_USB_RESET:
+ need_reinit = true;
+ }
+ }
+
+ /* If needed, reinitialize and suspend the root hub */
+ if (need_reinit) {
+ spin_lock_irq(&ohci->lock);
+ ohci_rh_resume(ohci);
+ ohci_rh_suspend(ohci, 0);
+ spin_unlock_irq(&ohci->lock);
+ }
+
+ /* Normally just turn on port power and enable interrupts */
+ else {
+ ohci_dbg(ohci, "powerup ports\n");
+ for (port = 0; port < ohci->num_ports; port++)
+ ohci_writel(ohci, RH_PS_PPS,
+ &ohci->regs->roothub.portstatus[port]);
+
+ ohci_writel(ohci, OHCI_INTR_MIE, &ohci->regs->intrenable);
+ ohci_readl(ohci, &ohci->regs->intrenable);
+ msleep(20);
+ }
+
+ usb_hcd_resume_root_hub(hcd);
+
+ return 0;
+}
+
+#endif
+
/*-------------------------------------------------------------------------*/
MODULE_AUTHOR (DRIVER_AUTHOR);
@@ -1029,21 +1130,6 @@
#define PLATFORM_DRIVER ohci_hcd_ep93xx_driver
#endif
-#ifdef CONFIG_MIPS_ALCHEMY
-#include "ohci-au1xxx.c"
-#define PLATFORM_DRIVER ohci_hcd_au1xxx_driver
-#endif
-
-#ifdef CONFIG_PNX8550
-#include "ohci-pnx8550.c"
-#define PLATFORM_DRIVER ohci_hcd_pnx8550_driver
-#endif
-
-#ifdef CONFIG_USB_OHCI_HCD_PPC_SOC
-#include "ohci-ppc-soc.c"
-#define PLATFORM_DRIVER ohci_hcd_ppc_soc_driver
-#endif
-
#ifdef CONFIG_ARCH_AT91
#include "ohci-at91.c"
#define PLATFORM_DRIVER ohci_hcd_at91_driver
@@ -1059,11 +1145,6 @@
#define PLATFORM_DRIVER ohci_hcd_da8xx_driver
#endif
-#ifdef CONFIG_USB_OHCI_SH
-#include "ohci-sh.c"
-#define PLATFORM_DRIVER ohci_hcd_sh_driver
-#endif
-
#ifdef CONFIG_USB_OHCI_HCD_PPC_OF
#include "ohci-ppc-of.c"
@@ -1105,16 +1186,6 @@
#define PLATFORM_DRIVER ohci_hcd_tilegx_driver
#endif
-#ifdef CONFIG_USB_CNS3XXX_OHCI
-#include "ohci-cns3xxx.c"
-#define PLATFORM_DRIVER ohci_hcd_cns3xxx_driver
-#endif
-
-#ifdef CONFIG_CPU_XLR
-#include "ohci-xls.c"
-#define PLATFORM_DRIVER ohci_xls_driver
-#endif
-
#ifdef CONFIG_USB_OHCI_HCD_PLATFORM
#include "ohci-platform.c"
#define PLATFORM_DRIVER ohci_platform_driver
diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c
index 2f3619e..db09dae 100644
--- a/drivers/usb/host/ohci-hub.c
+++ b/drivers/usb/host/ohci-hub.c
@@ -316,48 +316,6 @@
return rc;
}
-/* Carry out the final steps of resuming the controller device */
-static void __maybe_unused ohci_finish_controller_resume(struct usb_hcd *hcd)
-{
- struct ohci_hcd *ohci = hcd_to_ohci(hcd);
- int port;
- bool need_reinit = false;
-
- /* See if the controller is already running or has been reset */
- ohci->hc_control = ohci_readl(ohci, &ohci->regs->control);
- if (ohci->hc_control & (OHCI_CTRL_IR | OHCI_SCHED_ENABLES)) {
- need_reinit = true;
- } else {
- switch (ohci->hc_control & OHCI_CTRL_HCFS) {
- case OHCI_USB_OPER:
- case OHCI_USB_RESET:
- need_reinit = true;
- }
- }
-
- /* If needed, reinitialize and suspend the root hub */
- if (need_reinit) {
- spin_lock_irq(&ohci->lock);
- ohci_rh_resume(ohci);
- ohci_rh_suspend(ohci, 0);
- spin_unlock_irq(&ohci->lock);
- }
-
- /* Normally just turn on port power and enable interrupts */
- else {
- ohci_dbg(ohci, "powerup ports\n");
- for (port = 0; port < ohci->num_ports; port++)
- ohci_writel(ohci, RH_PS_PPS,
- &ohci->regs->roothub.portstatus[port]);
-
- ohci_writel(ohci, OHCI_INTR_MIE, &ohci->regs->intrenable);
- ohci_readl(ohci, &ohci->regs->intrenable);
- msleep(20);
- }
-
- usb_hcd_resume_root_hub(hcd);
-}
-
/* Carry out polling-, autostop-, and autoresume-related state changes */
static int ohci_root_hub_state_changes(struct ohci_hcd *ohci, int changed,
int any_connected, int rhsc_status)
diff --git a/drivers/usb/host/ohci-jz4740.c b/drivers/usb/host/ohci-jz4740.c
index 931d588..8062bb9 100644
--- a/drivers/usb/host/ohci-jz4740.c
+++ b/drivers/usb/host/ohci-jz4740.c
@@ -145,7 +145,7 @@
};
-static __devinit int jz4740_ohci_probe(struct platform_device *pdev)
+static int jz4740_ohci_probe(struct platform_device *pdev)
{
int ret;
struct usb_hcd *hcd;
@@ -239,7 +239,7 @@
return ret;
}
-static __devexit int jz4740_ohci_remove(struct platform_device *pdev)
+static int jz4740_ohci_remove(struct platform_device *pdev)
{
struct usb_hcd *hcd = platform_get_drvdata(pdev);
struct jz4740_ohci_hcd *jz4740_ohci = hcd_to_jz4740_hcd(hcd);
@@ -266,7 +266,7 @@
static struct platform_driver ohci_hcd_jz4740_driver = {
.probe = jz4740_ohci_probe,
- .remove = __devexit_p(jz4740_ohci_remove),
+ .remove = jz4740_ohci_remove,
.driver = {
.name = "jz4740-ohci",
.owner = THIS_MODULE,
diff --git a/drivers/usb/host/ohci-nxp.c b/drivers/usb/host/ohci-nxp.c
index e068f03..2344040 100644
--- a/drivers/usb/host/ohci-nxp.c
+++ b/drivers/usb/host/ohci-nxp.c
@@ -147,7 +147,7 @@
__raw_writel(tmp, USB_OTG_STAT_CONTROL);
}
-static int __devinit ohci_nxp_start(struct usb_hcd *hcd)
+static int ohci_nxp_start(struct usb_hcd *hcd)
{
struct ohci_hcd *ohci = hcd_to_ohci(hcd);
int ret;
@@ -205,7 +205,7 @@
.start_port_reset = ohci_start_port_reset,
};
-static int __devinit usb_hcd_nxp_probe(struct platform_device *pdev)
+static int usb_hcd_nxp_probe(struct platform_device *pdev)
{
struct usb_hcd *hcd = 0;
struct ohci_hcd *ohci;
diff --git a/drivers/usb/host/ohci-octeon.c b/drivers/usb/host/ohci-octeon.c
index d469bf9..d44430d 100644
--- a/drivers/usb/host/ohci-octeon.c
+++ b/drivers/usb/host/ohci-octeon.c
@@ -42,7 +42,7 @@
octeon2_usb_clocks_stop();
}
-static int __devinit ohci_octeon_start(struct usb_hcd *hcd)
+static int ohci_octeon_start(struct usb_hcd *hcd)
{
struct ohci_hcd *ohci = hcd_to_ohci(hcd);
int ret;
diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c
index 4531d03..733c77c 100644
--- a/drivers/usb/host/ohci-omap.c
+++ b/drivers/usb/host/ohci-omap.c
@@ -530,7 +530,7 @@
ohci->next_statechange = jiffies;
omap_ohci_clock_power(1);
- ohci_finish_controller_resume(hcd);
+ ohci_resume(hcd, false);
return 0;
}
diff --git a/drivers/usb/host/ohci-omap3.c b/drivers/usb/host/ohci-omap3.c
index 1b8133b..4382af3 100644
--- a/drivers/usb/host/ohci-omap3.c
+++ b/drivers/usb/host/ohci-omap3.c
@@ -125,7 +125,7 @@
* then invokes the start() method for the HCD associated with it
* through the hotplug entry's driver_data.
*/
-static int __devinit ohci_hcd_omap3_probe(struct platform_device *pdev)
+static int ohci_hcd_omap3_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct usb_hcd *hcd = NULL;
@@ -209,7 +209,7 @@
* the HCD's stop() method. It is always called from a thread
* context, normally "rmmod", "apmd", or something similar.
*/
-static int __devexit ohci_hcd_omap3_remove(struct platform_device *pdev)
+static int ohci_hcd_omap3_remove(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct usb_hcd *hcd = dev_get_drvdata(dev);
@@ -232,7 +232,7 @@
static struct platform_driver ohci_hcd_omap3_driver = {
.probe = ohci_hcd_omap3_probe,
- .remove = __devexit_p(ohci_hcd_omap3_remove),
+ .remove = ohci_hcd_omap3_remove,
.shutdown = ohci_hcd_omap3_shutdown,
.driver = {
.name = "ohci-omap3",
diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c
index 1843bb6..951514e 100644
--- a/drivers/usb/host/ohci-pci.c
+++ b/drivers/usb/host/ohci-pci.c
@@ -270,7 +270,7 @@
}
-static int __devinit ohci_pci_start (struct usb_hcd *hcd)
+static int ohci_pci_start (struct usb_hcd *hcd)
{
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
int ret;
@@ -296,49 +296,6 @@
return ret;
}
-#ifdef CONFIG_PM
-
-static int ohci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
-{
- struct ohci_hcd *ohci = hcd_to_ohci (hcd);
- unsigned long flags;
- int rc = 0;
-
- /* Root hub was already suspended. Disable irq emission and
- * mark HW unaccessible, bail out if RH has been resumed. Use
- * the spinlock to properly synchronize with possible pending
- * RH suspend or resume activity.
- */
- spin_lock_irqsave (&ohci->lock, flags);
- if (ohci->rh_state != OHCI_RH_SUSPENDED) {
- rc = -EINVAL;
- goto bail;
- }
- ohci_writel(ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable);
- (void)ohci_readl(ohci, &ohci->regs->intrdisable);
-
- clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
- bail:
- spin_unlock_irqrestore (&ohci->lock, flags);
-
- return rc;
-}
-
-
-static int ohci_pci_resume(struct usb_hcd *hcd, bool hibernated)
-{
- set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
-
- /* Make sure resume from hibernation re-enumerates everything */
- if (hibernated)
- ohci_usb_reset(hcd_to_ohci(hcd));
-
- ohci_finish_controller_resume(hcd);
- return 0;
-}
-
-#endif /* CONFIG_PM */
-
/*-------------------------------------------------------------------------*/
@@ -362,8 +319,8 @@
.shutdown = ohci_shutdown,
#ifdef CONFIG_PM
- .pci_suspend = ohci_pci_suspend,
- .pci_resume = ohci_pci_resume,
+ .pci_suspend = ohci_suspend,
+ .pci_resume = ohci_resume,
#endif
/*
diff --git a/drivers/usb/host/ohci-platform.c b/drivers/usb/host/ohci-platform.c
index e24ec9f..084503b 100644
--- a/drivers/usb/host/ohci-platform.c
+++ b/drivers/usb/host/ohci-platform.c
@@ -31,6 +31,10 @@
ohci->flags |= OHCI_QUIRK_FRAME_NO;
ohci_hcd_init(ohci);
+
+ if (pdata->num_ports)
+ ohci->num_ports = pdata->num_ports;
+
err = ohci_init(ohci);
return err;
@@ -79,7 +83,7 @@
.start_port_reset = ohci_start_port_reset,
};
-static int __devinit ohci_platform_probe(struct platform_device *dev)
+static int ohci_platform_probe(struct platform_device *dev)
{
struct usb_hcd *hcd;
struct resource *res_mem;
@@ -97,13 +101,13 @@
irq = platform_get_irq(dev, 0);
if (irq < 0) {
- pr_err("no irq provided");
+ dev_err(&dev->dev, "no irq provided");
return irq;
}
res_mem = platform_get_resource(dev, IORESOURCE_MEM, 0);
if (!res_mem) {
- pr_err("no memory recourse provided");
+ dev_err(&dev->dev, "no memory resource provided");
return -ENXIO;
}
@@ -123,29 +127,19 @@
hcd->rsrc_start = res_mem->start;
hcd->rsrc_len = resource_size(res_mem);
- if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
- pr_err("controller already in use");
- err = -EBUSY;
- goto err_put_hcd;
- }
-
- hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
+ hcd->regs = devm_request_and_ioremap(&dev->dev, res_mem);
if (!hcd->regs) {
err = -ENOMEM;
- goto err_release_region;
+ goto err_put_hcd;
}
err = usb_add_hcd(hcd, irq, IRQF_SHARED);
if (err)
- goto err_iounmap;
+ goto err_put_hcd;
platform_set_drvdata(dev, hcd);
return err;
-err_iounmap:
- iounmap(hcd->regs);
-err_release_region:
- release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
err_put_hcd:
usb_put_hcd(hcd);
err_power:
@@ -155,14 +149,12 @@
return err;
}
-static int __devexit ohci_platform_remove(struct platform_device *dev)
+static int ohci_platform_remove(struct platform_device *dev)
{
struct usb_hcd *hcd = platform_get_drvdata(dev);
struct usb_ohci_pdata *pdata = dev->dev.platform_data;
usb_remove_hcd(hcd);
- iounmap(hcd->regs);
- release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
usb_put_hcd(hcd);
platform_set_drvdata(dev, NULL);
@@ -199,7 +191,7 @@
return err;
}
- ohci_finish_controller_resume(hcd);
+ ohci_resume(hcd, false);
return 0;
}
@@ -222,7 +214,7 @@
static struct platform_driver ohci_platform_driver = {
.id_table = ohci_platform_table,
.probe = ohci_platform_probe,
- .remove = __devexit_p(ohci_platform_remove),
+ .remove = ohci_platform_remove,
.shutdown = usb_hcd_platform_shutdown,
.driver = {
.owner = THIS_MODULE,
diff --git a/drivers/usb/host/ohci-pnx8550.c b/drivers/usb/host/ohci-pnx8550.c
deleted file mode 100644
index 148d27d..0000000
--- a/drivers/usb/host/ohci-pnx8550.c
+++ /dev/null
@@ -1,243 +0,0 @@
-/*
- * OHCI HCD (Host Controller Driver) for USB.
- *
- * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
- * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
- * (C) Copyright 2002 Hewlett-Packard Company
- * (C) Copyright 2005 Embedded Alley Solutions, Inc.
- *
- * Bus Glue for PNX8550
- *
- * Written by Christopher Hoover <ch@hpl.hp.com>
- * Based on fragments of previous driver by Russell King et al.
- *
- * Modified for LH7A404 from ohci-sa1111.c
- * by Durgesh Pattamatta <pattamattad@sharpsec.com>
- *
- * Modified for PNX8550 from ohci-sa1111.c and sa-omap.c
- * by Vitaly Wool <vitalywool@gmail.com>
- *
- * This file is licenced under the GPL.
- */
-
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <asm/mach-pnx8550/usb.h>
-#include <asm/mach-pnx8550/int.h>
-#include <asm/mach-pnx8550/pci.h>
-
-#ifndef CONFIG_PNX8550
-#error "This file is PNX8550 bus glue. CONFIG_PNX8550 must be defined."
-#endif
-
-extern int usb_disabled(void);
-
-/*-------------------------------------------------------------------------*/
-
-static void pnx8550_start_hc(struct platform_device *dev)
-{
- /*
- * Set register CLK48CTL to enable and 48MHz
- */
- outl(0x00000003, PCI_BASE | 0x0004770c);
-
- /*
- * Set register CLK12CTL to enable and 48MHz
- */
- outl(0x00000003, PCI_BASE | 0x00047710);
-
- udelay(100);
-}
-
-static void pnx8550_stop_hc(struct platform_device *dev)
-{
- udelay(10);
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-/* configure so an HC device and id are always provided */
-/* always called with process context; sleeping is OK */
-
-
-/**
- * usb_hcd_pnx8550_probe - initialize pnx8550-based HCDs
- * Context: !in_interrupt()
- *
- * Allocates basic resources for this USB host controller, and
- * then invokes the start() method for the HCD associated with it
- * through the hotplug entry's driver_data.
- *
- */
-int usb_hcd_pnx8550_probe (const struct hc_driver *driver,
- struct platform_device *dev)
-{
- int retval;
- struct usb_hcd *hcd;
-
- if (dev->resource[0].flags != IORESOURCE_MEM ||
- dev->resource[1].flags != IORESOURCE_IRQ) {
- dev_err (&dev->dev,"invalid resource type\n");
- return -ENOMEM;
- }
-
- hcd = usb_create_hcd (driver, &dev->dev, "pnx8550");
- if (!hcd)
- return -ENOMEM;
- hcd->rsrc_start = dev->resource[0].start;
- hcd->rsrc_len = dev->resource[0].end - dev->resource[0].start + 1;
-
- if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
- dev_err(&dev->dev, "request_mem_region [0x%08llx, 0x%08llx] "
- "failed\n", hcd->rsrc_start, hcd->rsrc_len);
- retval = -EBUSY;
- goto err1;
- }
-
- hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
- if (!hcd->regs) {
- dev_err(&dev->dev, "ioremap [[0x%08llx, 0x%08llx] failed\n",
- hcd->rsrc_start, hcd->rsrc_len);
- retval = -ENOMEM;
- goto err2;
- }
-
- pnx8550_start_hc(dev);
-
- ohci_hcd_init(hcd_to_ohci(hcd));
-
- retval = usb_add_hcd(hcd, dev->resource[1].start, 0);
- if (retval == 0)
- return retval;
-
- pnx8550_stop_hc(dev);
- iounmap(hcd->regs);
- err2:
- release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
- err1:
- usb_put_hcd(hcd);
- return retval;
-}
-
-
-/* may be called without controller electrically present */
-/* may be called with controller, bus, and devices active */
-
-/**
- * usb_hcd_pnx8550_remove - shutdown processing for pnx8550-based HCDs
- * @dev: USB Host Controller being removed
- * Context: !in_interrupt()
- *
- * Reverses the effect of usb_hcd_pnx8550_probe(), first invoking
- * the HCD's stop() method. It is always called from a thread
- * context, normally "rmmod", "apmd", or something similar.
- *
- */
-void usb_hcd_pnx8550_remove (struct usb_hcd *hcd, struct platform_device *dev)
-{
- usb_remove_hcd(hcd);
- pnx8550_stop_hc(dev);
- iounmap(hcd->regs);
- release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
- usb_put_hcd(hcd);
-}
-
-/*-------------------------------------------------------------------------*/
-
-static int __devinit
-ohci_pnx8550_start (struct usb_hcd *hcd)
-{
- struct ohci_hcd *ohci = hcd_to_ohci (hcd);
- int ret;
-
- ohci_dbg (ohci, "ohci_pnx8550_start, ohci:%p", ohci);
-
- if ((ret = ohci_init(ohci)) < 0)
- return ret;
-
- if ((ret = ohci_run (ohci)) < 0) {
- dev_err(hcd->self.controller, "can't start %s",
- hcd->self.bus_name);
- ohci_stop (hcd);
- return ret;
- }
-
- return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-
-static const struct hc_driver ohci_pnx8550_hc_driver = {
- .description = hcd_name,
- .product_desc = "PNX8550 OHCI",
- .hcd_priv_size = sizeof(struct ohci_hcd),
-
- /*
- * generic hardware linkage
- */
- .irq = ohci_irq,
- .flags = HCD_USB11 | HCD_MEMORY,
-
- /*
- * basic lifecycle operations
- */
- .start = ohci_pnx8550_start,
- .stop = ohci_stop,
-
- /*
- * managing i/o requests and associated device resources
- */
- .urb_enqueue = ohci_urb_enqueue,
- .urb_dequeue = ohci_urb_dequeue,
- .endpoint_disable = ohci_endpoint_disable,
-
- /*
- * scheduling support
- */
- .get_frame_number = ohci_get_frame,
-
- /*
- * root hub support
- */
- .hub_status_data = ohci_hub_status_data,
- .hub_control = ohci_hub_control,
-#ifdef CONFIG_PM
- .bus_suspend = ohci_bus_suspend,
- .bus_resume = ohci_bus_resume,
-#endif
- .start_port_reset = ohci_start_port_reset,
-};
-
-/*-------------------------------------------------------------------------*/
-
-static int ohci_hcd_pnx8550_drv_probe(struct platform_device *pdev)
-{
- int ret;
-
- if (usb_disabled())
- return -ENODEV;
-
- ret = usb_hcd_pnx8550_probe(&ohci_pnx8550_hc_driver, pdev);
- return ret;
-}
-
-static int ohci_hcd_pnx8550_drv_remove(struct platform_device *pdev)
-{
- struct usb_hcd *hcd = platform_get_drvdata(pdev);
-
- usb_hcd_pnx8550_remove(hcd, pdev);
- return 0;
-}
-
-MODULE_ALIAS("platform:pnx8550-ohci");
-
-static struct platform_driver ohci_hcd_pnx8550_driver = {
- .driver = {
- .name = "pnx8550-ohci",
- .owner = THIS_MODULE,
- },
- .probe = ohci_hcd_pnx8550_drv_probe,
- .remove = ohci_hcd_pnx8550_drv_remove,
-};
-
diff --git a/drivers/usb/host/ohci-ppc-of.c b/drivers/usb/host/ohci-ppc-of.c
index e27d5ae..64c2ed9f 100644
--- a/drivers/usb/host/ohci-ppc-of.c
+++ b/drivers/usb/host/ohci-ppc-of.c
@@ -19,7 +19,7 @@
#include <asm/prom.h>
-static int __devinit
+static int
ohci_ppc_of_start(struct usb_hcd *hcd)
{
struct ohci_hcd *ohci = hcd_to_ohci(hcd);
@@ -81,7 +81,7 @@
};
-static int __devinit ohci_hcd_ppc_of_probe(struct platform_device *op)
+static int ohci_hcd_ppc_of_probe(struct platform_device *op)
{
struct device_node *dn = op->dev.of_node;
struct usb_hcd *hcd;
diff --git a/drivers/usb/host/ohci-ppc-soc.c b/drivers/usb/host/ohci-ppc-soc.c
deleted file mode 100644
index 185c39e..0000000
--- a/drivers/usb/host/ohci-ppc-soc.c
+++ /dev/null
@@ -1,216 +0,0 @@
-/*
- * OHCI HCD (Host Controller Driver) for USB.
- *
- * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
- * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
- * (C) Copyright 2002 Hewlett-Packard Company
- * (C) Copyright 2003-2005 MontaVista Software Inc.
- *
- * Bus Glue for PPC On-Chip OHCI driver
- * Tested on Freescale MPC5200 and IBM STB04xxx
- *
- * Modified by Dale Farnsworth <dale@farnsworth.org> from ohci-sa1111.c
- *
- * This file is licenced under the GPL.
- */
-
-#include <linux/platform_device.h>
-#include <linux/signal.h>
-
-/* configure so an HC device and id are always provided */
-/* always called with process context; sleeping is OK */
-
-/**
- * usb_hcd_ppc_soc_probe - initialize On-Chip HCDs
- * Context: !in_interrupt()
- *
- * Allocates basic resources for this USB host controller.
- *
- * Store this function in the HCD's struct pci_driver as probe().
- */
-static int usb_hcd_ppc_soc_probe(const struct hc_driver *driver,
- struct platform_device *pdev)
-{
- int retval;
- struct usb_hcd *hcd;
- struct ohci_hcd *ohci;
- struct resource *res;
- int irq;
-
- pr_debug("initializing PPC-SOC USB Controller\n");
-
- res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
- if (!res) {
- pr_debug("%s: no irq\n", __FILE__);
- return -ENODEV;
- }
- irq = res->start;
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- pr_debug("%s: no reg addr\n", __FILE__);
- return -ENODEV;
- }
-
- hcd = usb_create_hcd(driver, &pdev->dev, "PPC-SOC USB");
- if (!hcd)
- return -ENOMEM;
- hcd->rsrc_start = res->start;
- hcd->rsrc_len = resource_size(res);
-
- if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
- pr_debug("%s: request_mem_region failed\n", __FILE__);
- retval = -EBUSY;
- goto err1;
- }
-
- hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
- if (!hcd->regs) {
- pr_debug("%s: ioremap failed\n", __FILE__);
- retval = -ENOMEM;
- goto err2;
- }
-
- ohci = hcd_to_ohci(hcd);
- ohci->flags |= OHCI_QUIRK_BE_MMIO | OHCI_QUIRK_BE_DESC;
-
-#ifdef CONFIG_PPC_MPC52xx
- /* MPC52xx doesn't need frame_no shift */
- ohci->flags |= OHCI_QUIRK_FRAME_NO;
-#endif
- ohci_hcd_init(ohci);
-
- retval = usb_add_hcd(hcd, irq, 0);
- if (retval == 0)
- return retval;
-
- pr_debug("Removing PPC-SOC USB Controller\n");
-
- iounmap(hcd->regs);
- err2:
- release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
- err1:
- usb_put_hcd(hcd);
- return retval;
-}
-
-
-/* may be called without controller electrically present */
-/* may be called with controller, bus, and devices active */
-
-/**
- * usb_hcd_ppc_soc_remove - shutdown processing for On-Chip HCDs
- * @pdev: USB Host Controller being removed
- * Context: !in_interrupt()
- *
- * Reverses the effect of usb_hcd_ppc_soc_probe().
- * It is always called from a thread
- * context, normally "rmmod", "apmd", or something similar.
- *
- */
-static void usb_hcd_ppc_soc_remove(struct usb_hcd *hcd,
- struct platform_device *pdev)
-{
- usb_remove_hcd(hcd);
-
- pr_debug("stopping PPC-SOC USB Controller\n");
-
- iounmap(hcd->regs);
- release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
- usb_put_hcd(hcd);
-}
-
-static int __devinit
-ohci_ppc_soc_start(struct usb_hcd *hcd)
-{
- struct ohci_hcd *ohci = hcd_to_ohci(hcd);
- int ret;
-
- if ((ret = ohci_init(ohci)) < 0)
- return ret;
-
- if ((ret = ohci_run(ohci)) < 0) {
- dev_err(hcd->self.controller, "can't start %s\n",
- hcd->self.bus_name);
- ohci_stop(hcd);
- return ret;
- }
-
- return 0;
-}
-
-static const struct hc_driver ohci_ppc_soc_hc_driver = {
- .description = hcd_name,
- .hcd_priv_size = sizeof(struct ohci_hcd),
-
- /*
- * generic hardware linkage
- */
- .irq = ohci_irq,
- .flags = HCD_USB11 | HCD_MEMORY,
-
- /*
- * basic lifecycle operations
- */
- .start = ohci_ppc_soc_start,
- .stop = ohci_stop,
- .shutdown = ohci_shutdown,
-
- /*
- * managing i/o requests and associated device resources
- */
- .urb_enqueue = ohci_urb_enqueue,
- .urb_dequeue = ohci_urb_dequeue,
- .endpoint_disable = ohci_endpoint_disable,
-
- /*
- * scheduling support
- */
- .get_frame_number = ohci_get_frame,
-
- /*
- * root hub support
- */
- .hub_status_data = ohci_hub_status_data,
- .hub_control = ohci_hub_control,
-#ifdef CONFIG_PM
- .bus_suspend = ohci_bus_suspend,
- .bus_resume = ohci_bus_resume,
-#endif
- .start_port_reset = ohci_start_port_reset,
-};
-
-static int ohci_hcd_ppc_soc_drv_probe(struct platform_device *pdev)
-{
- int ret;
-
- if (usb_disabled())
- return -ENODEV;
-
- ret = usb_hcd_ppc_soc_probe(&ohci_ppc_soc_hc_driver, pdev);
- return ret;
-}
-
-static int ohci_hcd_ppc_soc_drv_remove(struct platform_device *pdev)
-{
- struct usb_hcd *hcd = platform_get_drvdata(pdev);
-
- usb_hcd_ppc_soc_remove(hcd, pdev);
- return 0;
-}
-
-static struct platform_driver ohci_hcd_ppc_soc_driver = {
- .probe = ohci_hcd_ppc_soc_drv_probe,
- .remove = ohci_hcd_ppc_soc_drv_remove,
- .shutdown = usb_hcd_platform_shutdown,
-#ifdef CONFIG_PM
- /*.suspend = ohci_hcd_ppc_soc_drv_suspend,*/
- /*.resume = ohci_hcd_ppc_soc_drv_resume,*/
-#endif
- .driver = {
- .name = "ppc-soc-ohci",
- .owner = THIS_MODULE,
- },
-};
-
-MODULE_ALIAS("platform:ppc-soc-ohci");
diff --git a/drivers/usb/host/ohci-ps3.c b/drivers/usb/host/ohci-ps3.c
index 2ee1d8d..7d35cd9 100644
--- a/drivers/usb/host/ohci-ps3.c
+++ b/drivers/usb/host/ohci-ps3.c
@@ -30,7 +30,7 @@
return ohci_init(ohci);
}
-static int __devinit ps3_ohci_hc_start(struct usb_hcd *hcd)
+static int ps3_ohci_hc_start(struct usb_hcd *hcd)
{
int result;
struct ohci_hcd *ohci = hcd_to_ohci(hcd);
@@ -76,7 +76,7 @@
#endif
};
-static int __devinit ps3_ohci_probe(struct ps3_system_bus_device *dev)
+static int ps3_ohci_probe(struct ps3_system_bus_device *dev)
{
int result;
struct usb_hcd *hcd;
diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c
index 2bf1144..efe71f3 100644
--- a/drivers/usb/host/ohci-pxa27x.c
+++ b/drivers/usb/host/ohci-pxa27x.c
@@ -284,7 +284,7 @@
static u64 pxa_ohci_dma_mask = DMA_BIT_MASK(32);
-static int __devinit ohci_pxa_of_init(struct platform_device *pdev)
+static int ohci_pxa_of_init(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
struct pxaohci_platform_data *pdata;
@@ -330,7 +330,7 @@
return 0;
}
#else
-static int __devinit ohci_pxa_of_init(struct platform_device *pdev)
+static int ohci_pxa_of_init(struct platform_device *pdev)
{
return 0;
}
@@ -471,7 +471,7 @@
/*-------------------------------------------------------------------------*/
-static int __devinit
+static int
ohci_pxa27x_start (struct usb_hcd *hcd)
{
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
@@ -591,7 +591,7 @@
/* Select Power Management Mode */
pxa27x_ohci_select_pmm(ohci, inf->port_mode);
- ohci_finish_controller_resume(hcd);
+ ohci_resume(hcd, false);
return 0;
}
diff --git a/drivers/usb/host/ohci-q.c b/drivers/usb/host/ohci-q.c
index c5a1ea9..7482cfb 100644
--- a/drivers/usb/host/ohci-q.c
+++ b/drivers/usb/host/ohci-q.c
@@ -596,7 +596,6 @@
urb_priv->ed->hwHeadP &= ~cpu_to_hc32 (ohci, ED_C);
}
- urb_priv->td_cnt = 0;
list_add (&urb_priv->pending, &ohci->pending);
if (data_len)
@@ -672,7 +671,8 @@
* we could often reduce the number of TDs here.
*/
case PIPE_ISOCHRONOUS:
- for (cnt = 0; cnt < urb->number_of_packets; cnt++) {
+ for (cnt = urb_priv->td_cnt; cnt < urb->number_of_packets;
+ cnt++) {
int frame = urb->start_frame;
// FIXME scheduling should handle frame counter
@@ -1128,6 +1128,25 @@
while (td) {
struct td *td_next = td->next_dl_td;
+ struct ed *ed = td->ed;
+
+ /*
+ * Some OHCI controllers (NVIDIA for sure, maybe others)
+ * occasionally forget to add TDs to the done queue. Since
+ * TDs for a given endpoint are always processed in order,
+ * if we find a TD on the donelist then all of its
+ * predecessors must be finished as well.
+ */
+ for (;;) {
+ struct td *td2;
+
+ td2 = list_first_entry(&ed->td_list, struct td,
+ td_list);
+ if (td2 == td)
+ break;
+ takeback_td(ohci, td2);
+ }
+
takeback_td(ohci, td);
td = td_next;
}
diff --git a/drivers/usb/host/ohci-s3c2410.c b/drivers/usb/host/ohci-s3c2410.c
index 0d2309c..ad0f552 100644
--- a/drivers/usb/host/ohci-s3c2410.c
+++ b/drivers/usb/host/ohci-s3c2410.c
@@ -323,8 +323,6 @@
{
usb_remove_hcd(hcd);
s3c2410_stop_hc(dev);
- iounmap(hcd->regs);
- release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
usb_put_hcd(hcd);
}
@@ -353,35 +351,29 @@
hcd->rsrc_start = dev->resource[0].start;
hcd->rsrc_len = resource_size(&dev->resource[0]);
- if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
- dev_err(&dev->dev, "request_mem_region failed\n");
- retval = -EBUSY;
+ hcd->regs = devm_request_and_ioremap(&dev->dev, &dev->resource[0]);
+ if (!hcd->regs) {
+ dev_err(&dev->dev, "devm_request_and_ioremap failed\n");
+ retval = -ENOMEM;
goto err_put;
}
- clk = clk_get(&dev->dev, "usb-host");
+ clk = devm_clk_get(&dev->dev, "usb-host");
if (IS_ERR(clk)) {
dev_err(&dev->dev, "cannot get usb-host clock\n");
retval = PTR_ERR(clk);
- goto err_mem;
+ goto err_put;
}
- usb_clk = clk_get(&dev->dev, "usb-bus-host");
+ usb_clk = devm_clk_get(&dev->dev, "usb-bus-host");
if (IS_ERR(usb_clk)) {
dev_err(&dev->dev, "cannot get usb-bus-host clock\n");
retval = PTR_ERR(usb_clk);
- goto err_clk;
+ goto err_put;
}
s3c2410_start_hc(dev, hcd);
- hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
- if (!hcd->regs) {
- dev_err(&dev->dev, "ioremap failed\n");
- retval = -ENOMEM;
- goto err_ioremap;
- }
-
ohci_hcd_init(hcd_to_ohci(hcd));
retval = usb_add_hcd(hcd, dev->resource[1].start, 0);
@@ -392,14 +384,6 @@
err_ioremap:
s3c2410_stop_hc(dev);
- iounmap(hcd->regs);
- clk_put(usb_clk);
-
- err_clk:
- clk_put(clk);
-
- err_mem:
- release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
err_put:
usb_put_hcd(hcd);
@@ -474,12 +458,12 @@
/* device driver */
-static int __devinit ohci_hcd_s3c2410_drv_probe(struct platform_device *pdev)
+static int ohci_hcd_s3c2410_drv_probe(struct platform_device *pdev)
{
return usb_hcd_s3c2410_probe(&ohci_s3c2410_hc_driver, pdev);
}
-static int __devexit ohci_hcd_s3c2410_drv_remove(struct platform_device *pdev)
+static int ohci_hcd_s3c2410_drv_remove(struct platform_device *pdev)
{
struct usb_hcd *hcd = platform_get_drvdata(pdev);
@@ -524,8 +508,7 @@
s3c2410_start_hc(pdev, hcd);
- set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
- ohci_finish_controller_resume(hcd);
+ ohci_resume(hcd, false);
return 0;
}
@@ -541,7 +524,7 @@
static struct platform_driver ohci_hcd_s3c2410_driver = {
.probe = ohci_hcd_s3c2410_drv_probe,
- .remove = __devexit_p(ohci_hcd_s3c2410_drv_remove),
+ .remove = ohci_hcd_s3c2410_drv_remove,
.shutdown = usb_hcd_platform_shutdown,
.driver = {
.owner = THIS_MODULE,
diff --git a/drivers/usb/host/ohci-sa1111.c b/drivers/usb/host/ohci-sa1111.c
index b6cc925..17b2a7d 100644
--- a/drivers/usb/host/ohci-sa1111.c
+++ b/drivers/usb/host/ohci-sa1111.c
@@ -63,7 +63,7 @@
return ohci_init(ohci);
}
-static int __devinit ohci_sa1111_start(struct usb_hcd *hcd)
+static int ohci_sa1111_start(struct usb_hcd *hcd)
{
struct ohci_hcd *ohci = hcd_to_ohci(hcd);
int ret;
diff --git a/drivers/usb/host/ohci-sh.c b/drivers/usb/host/ohci-sh.c
deleted file mode 100644
index 76a20c2..0000000
--- a/drivers/usb/host/ohci-sh.c
+++ /dev/null
@@ -1,141 +0,0 @@
-/*
- * OHCI HCD (Host Controller Driver) for USB.
- *
- * Copyright (C) 2008 Renesas Solutions Corp.
- *
- * Author : Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- *
- */
-
-#include <linux/platform_device.h>
-
-static int ohci_sh_start(struct usb_hcd *hcd)
-{
- struct ohci_hcd *ohci = hcd_to_ohci(hcd);
-
- ohci_hcd_init(ohci);
- ohci_init(ohci);
- ohci_run(ohci);
- return 0;
-}
-
-static const struct hc_driver ohci_sh_hc_driver = {
- .description = hcd_name,
- .product_desc = "SuperH OHCI",
- .hcd_priv_size = sizeof(struct ohci_hcd),
-
- /*
- * generic hardware linkage
- */
- .irq = ohci_irq,
- .flags = HCD_USB11 | HCD_MEMORY,
-
- /*
- * basic lifecycle operations
- */
- .start = ohci_sh_start,
- .stop = ohci_stop,
- .shutdown = ohci_shutdown,
-
- /*
- * managing i/o requests and associated device resources
- */
- .urb_enqueue = ohci_urb_enqueue,
- .urb_dequeue = ohci_urb_dequeue,
- .endpoint_disable = ohci_endpoint_disable,
-
- /*
- * scheduling support
- */
- .get_frame_number = ohci_get_frame,
-
- /*
- * root hub support
- */
- .hub_status_data = ohci_hub_status_data,
- .hub_control = ohci_hub_control,
-#ifdef CONFIG_PM
- .bus_suspend = ohci_bus_suspend,
- .bus_resume = ohci_bus_resume,
-#endif
- .start_port_reset = ohci_start_port_reset,
-};
-
-/*-------------------------------------------------------------------------*/
-
-static int ohci_hcd_sh_probe(struct platform_device *pdev)
-{
- struct resource *res = NULL;
- struct usb_hcd *hcd = NULL;
- int irq = -1;
- int ret;
-
- if (usb_disabled())
- return -ENODEV;
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- dev_err(&pdev->dev, "platform_get_resource error.\n");
- return -ENODEV;
- }
-
- irq = platform_get_irq(pdev, 0);
- if (irq < 0) {
- dev_err(&pdev->dev, "platform_get_irq error.\n");
- return -ENODEV;
- }
-
- /* initialize hcd */
- hcd = usb_create_hcd(&ohci_sh_hc_driver, &pdev->dev, (char *)hcd_name);
- if (!hcd) {
- dev_err(&pdev->dev, "Failed to create hcd\n");
- return -ENOMEM;
- }
-
- hcd->regs = (void __iomem *)res->start;
- hcd->rsrc_start = res->start;
- hcd->rsrc_len = resource_size(res);
- ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
- if (ret != 0) {
- dev_err(&pdev->dev, "Failed to add hcd\n");
- usb_put_hcd(hcd);
- return ret;
- }
-
- return ret;
-}
-
-static int ohci_hcd_sh_remove(struct platform_device *pdev)
-{
- struct usb_hcd *hcd = platform_get_drvdata(pdev);
-
- usb_remove_hcd(hcd);
- usb_put_hcd(hcd);
-
- return 0;
-}
-
-static struct platform_driver ohci_hcd_sh_driver = {
- .probe = ohci_hcd_sh_probe,
- .remove = ohci_hcd_sh_remove,
- .shutdown = usb_hcd_platform_shutdown,
- .driver = {
- .name = "sh_ohci",
- .owner = THIS_MODULE,
- },
-};
-
-MODULE_ALIAS("platform:sh_ohci");
diff --git a/drivers/usb/host/ohci-sm501.c b/drivers/usb/host/ohci-sm501.c
index 5596ac2..3b5b908 100644
--- a/drivers/usb/host/ohci-sm501.c
+++ b/drivers/usb/host/ohci-sm501.c
@@ -238,7 +238,7 @@
ohci->next_statechange = jiffies;
sm501_unit_power(dev->parent, SM501_GATE_USB_HOST, 1);
- ohci_finish_controller_resume(hcd);
+ ohci_resume(hcd, false);
return 0;
}
#else
diff --git a/drivers/usb/host/ohci-spear.c b/drivers/usb/host/ohci-spear.c
index fc7305e..9020bf0 100644
--- a/drivers/usb/host/ohci-spear.c
+++ b/drivers/usb/host/ohci-spear.c
@@ -33,7 +33,7 @@
clk_disable_unprepare(ohci->clk);
}
-static int __devinit ohci_spear_start(struct usb_hcd *hcd)
+static int ohci_spear_start(struct usb_hcd *hcd)
{
struct ohci_hcd *ohci = hcd_to_ohci(hcd);
int ret;
@@ -101,13 +101,11 @@
struct spear_ohci *ohci_p;
struct resource *res;
int retval, irq;
- char clk_name[20] = "usbh_clk";
- static int instance = -1;
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
retval = irq;
- goto fail_irq_get;
+ goto fail;
}
/*
@@ -118,47 +116,39 @@
if (!pdev->dev.dma_mask)
pdev->dev.dma_mask = &spear_ohci_dma_mask;
- /*
- * Increment the device instance, when probing via device-tree
- */
- if (pdev->id < 0)
- instance++;
- else
- instance = pdev->id;
- sprintf(clk_name, "usbh.%01d_clk", instance);
-
- usbh_clk = clk_get(NULL, clk_name);
+ usbh_clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(usbh_clk)) {
dev_err(&pdev->dev, "Error getting interface clock\n");
retval = PTR_ERR(usbh_clk);
- goto fail_get_usbh_clk;
+ goto fail;
}
hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
if (!hcd) {
retval = -ENOMEM;
- goto fail_create_hcd;
+ goto fail;
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
retval = -ENODEV;
- goto fail_request_resource;
+ goto err_put_hcd;
}
hcd->rsrc_start = pdev->resource[0].start;
hcd->rsrc_len = resource_size(res);
- if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
+ if (!devm_request_mem_region(&pdev->dev, hcd->rsrc_start, hcd->rsrc_len,
+ hcd_name)) {
dev_dbg(&pdev->dev, "request_mem_region failed\n");
retval = -EBUSY;
- goto fail_request_resource;
+ goto err_put_hcd;
}
- hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
+ hcd->regs = devm_ioremap(&pdev->dev, hcd->rsrc_start, hcd->rsrc_len);
if (!hcd->regs) {
dev_dbg(&pdev->dev, "ioremap failed\n");
retval = -ENOMEM;
- goto fail_ioremap;
+ goto err_put_hcd;
}
ohci_p = (struct spear_ohci *)hcd_to_ohci(hcd);
@@ -171,15 +161,9 @@
return retval;
spear_stop_ohci(ohci_p);
- iounmap(hcd->regs);
-fail_ioremap:
- release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-fail_request_resource:
+err_put_hcd:
usb_put_hcd(hcd);
-fail_create_hcd:
- clk_put(usbh_clk);
-fail_get_usbh_clk:
-fail_irq_get:
+fail:
dev_err(&pdev->dev, "init fail, %d\n", retval);
return retval;
@@ -194,12 +178,8 @@
if (ohci_p->clk)
spear_stop_ohci(ohci_p);
- iounmap(hcd->regs);
- release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
usb_put_hcd(hcd);
- if (ohci_p->clk)
- clk_put(ohci_p->clk);
platform_set_drvdata(pdev, NULL);
return 0;
}
@@ -231,12 +211,12 @@
ohci->next_statechange = jiffies;
spear_start_ohci(ohci_p);
- ohci_finish_controller_resume(hcd);
+ ohci_resume(hcd, false);
return 0;
}
#endif
-static struct of_device_id spear_ohci_id_table[] __devinitdata = {
+static struct of_device_id spear_ohci_id_table[] = {
{ .compatible = "st,spear600-ohci", },
{ },
};
diff --git a/drivers/usb/host/ohci-tmio.c b/drivers/usb/host/ohci-tmio.c
index 60c2b07..d370245 100644
--- a/drivers/usb/host/ohci-tmio.c
+++ b/drivers/usb/host/ohci-tmio.c
@@ -184,7 +184,7 @@
/*-------------------------------------------------------------------------*/
static struct platform_driver ohci_hcd_tmio_driver;
-static int __devinit ohci_hcd_tmio_drv_probe(struct platform_device *dev)
+static int ohci_hcd_tmio_drv_probe(struct platform_device *dev)
{
const struct mfd_cell *cell = mfd_get_cell(dev);
struct resource *regs = platform_get_resource(dev, IORESOURCE_MEM, 0);
@@ -271,7 +271,7 @@
return ret;
}
-static int __devexit ohci_hcd_tmio_drv_remove(struct platform_device *dev)
+static int ohci_hcd_tmio_drv_remove(struct platform_device *dev)
{
struct usb_hcd *hcd = platform_get_drvdata(dev);
struct tmio_hcd *tmio = hcd_to_tmio(hcd);
@@ -352,7 +352,7 @@
spin_unlock_irqrestore(&tmio->lock, flags);
- ohci_finish_controller_resume(hcd);
+ ohci_resume(hcd, false);
return 0;
}
@@ -363,7 +363,7 @@
static struct platform_driver ohci_hcd_tmio_driver = {
.probe = ohci_hcd_tmio_drv_probe,
- .remove = __devexit_p(ohci_hcd_tmio_drv_remove),
+ .remove = ohci_hcd_tmio_drv_remove,
.shutdown = usb_hcd_platform_shutdown,
.suspend = ohci_hcd_tmio_drv_suspend,
.resume = ohci_hcd_tmio_drv_resume,
diff --git a/drivers/usb/host/ohci-xls.c b/drivers/usb/host/ohci-xls.c
deleted file mode 100644
index 41e378f..0000000
--- a/drivers/usb/host/ohci-xls.c
+++ /dev/null
@@ -1,152 +0,0 @@
-/*
- * OHCI HCD for Netlogic XLS processors.
- *
- * (C) Copyright 2011 Netlogic Microsystems Inc.
- *
- * Based on ohci-au1xxx.c, and other Linux OHCI drivers.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file COPYING in the main directory of this archive for
- * more details.
- */
-
-#include <linux/platform_device.h>
-#include <linux/signal.h>
-
-static int ohci_xls_probe_internal(const struct hc_driver *driver,
- struct platform_device *dev)
-{
- struct resource *res;
- struct usb_hcd *hcd;
- int retval, irq;
-
- /* Get our IRQ from an earlier registered Platform Resource */
- irq = platform_get_irq(dev, 0);
- if (irq < 0) {
- dev_err(&dev->dev, "Found HC with no IRQ\n");
- return -ENODEV;
- }
-
- /* Get our Memory Handle */
- res = platform_get_resource(dev, IORESOURCE_MEM, 0);
- if (!res) {
- dev_err(&dev->dev, "MMIO Handle incorrect!\n");
- return -ENODEV;
- }
-
- hcd = usb_create_hcd(driver, &dev->dev, "XLS");
- if (!hcd) {
- retval = -ENOMEM;
- goto err1;
- }
- hcd->rsrc_start = res->start;
- hcd->rsrc_len = resource_size(res);
-
- if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len,
- driver->description)) {
- dev_dbg(&dev->dev, "Controller already in use\n");
- retval = -EBUSY;
- goto err2;
- }
-
- hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
- if (hcd->regs == NULL) {
- dev_dbg(&dev->dev, "error mapping memory\n");
- retval = -EFAULT;
- goto err3;
- }
-
- retval = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED);
- if (retval != 0)
- goto err4;
- return retval;
-
-err4:
- iounmap(hcd->regs);
-err3:
- release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-err2:
- usb_put_hcd(hcd);
-err1:
- dev_err(&dev->dev, "init fail, %d\n", retval);
- return retval;
-}
-
-static int ohci_xls_reset(struct usb_hcd *hcd)
-{
- struct ohci_hcd *ohci = hcd_to_ohci(hcd);
-
- ohci_hcd_init(ohci);
- return ohci_init(ohci);
-}
-
-static int __devinit ohci_xls_start(struct usb_hcd *hcd)
-{
- struct ohci_hcd *ohci;
- int ret;
-
- ohci = hcd_to_ohci(hcd);
- ret = ohci_run(ohci);
- if (ret < 0) {
- dev_err(hcd->self.controller, "can't start %s\n",
- hcd->self.bus_name);
- ohci_stop(hcd);
- return ret;
- }
- return 0;
-}
-
-static struct hc_driver ohci_xls_hc_driver = {
- .description = hcd_name,
- .product_desc = "XLS OHCI Host Controller",
- .hcd_priv_size = sizeof(struct ohci_hcd),
- .irq = ohci_irq,
- .flags = HCD_MEMORY | HCD_USB11,
- .reset = ohci_xls_reset,
- .start = ohci_xls_start,
- .stop = ohci_stop,
- .shutdown = ohci_shutdown,
- .urb_enqueue = ohci_urb_enqueue,
- .urb_dequeue = ohci_urb_dequeue,
- .endpoint_disable = ohci_endpoint_disable,
- .get_frame_number = ohci_get_frame,
- .hub_status_data = ohci_hub_status_data,
- .hub_control = ohci_hub_control,
-#ifdef CONFIG_PM
- .bus_suspend = ohci_bus_suspend,
- .bus_resume = ohci_bus_resume,
-#endif
- .start_port_reset = ohci_start_port_reset,
-};
-
-static int ohci_xls_probe(struct platform_device *dev)
-{
- int ret;
-
- pr_debug("In ohci_xls_probe");
- if (usb_disabled())
- return -ENODEV;
- ret = ohci_xls_probe_internal(&ohci_xls_hc_driver, dev);
- return ret;
-}
-
-static int ohci_xls_remove(struct platform_device *dev)
-{
- struct usb_hcd *hcd = platform_get_drvdata(dev);
-
- usb_remove_hcd(hcd);
- iounmap(hcd->regs);
- release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
- usb_put_hcd(hcd);
- return 0;
-}
-
-static struct platform_driver ohci_xls_driver = {
- .probe = ohci_xls_probe,
- .remove = ohci_xls_remove,
- .shutdown = usb_hcd_platform_shutdown,
- .driver = {
- .name = "ohci-xls-0",
- .owner = THIS_MODULE,
- },
-};
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index 39f9e4a..a3b6d71 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -443,7 +443,7 @@
#define pio_enabled(dev) io_type_enabled(dev, PCI_COMMAND_IO)
#define mmio_enabled(dev) io_type_enabled(dev, PCI_COMMAND_MEMORY)
-static void __devinit quirk_usb_handoff_uhci(struct pci_dev *pdev)
+static void quirk_usb_handoff_uhci(struct pci_dev *pdev)
{
unsigned long base = 0;
int i;
@@ -461,12 +461,12 @@
uhci_check_and_reset_hc(pdev, base);
}
-static int __devinit mmio_resource_enabled(struct pci_dev *pdev, int idx)
+static int mmio_resource_enabled(struct pci_dev *pdev, int idx)
{
return pci_resource_start(pdev, idx) && mmio_enabled(pdev);
}
-static void __devinit quirk_usb_handoff_ohci(struct pci_dev *pdev)
+static void quirk_usb_handoff_ohci(struct pci_dev *pdev)
{
void __iomem *base;
u32 control;
@@ -533,7 +533,7 @@
iounmap(base);
}
-static const struct dmi_system_id __devinitconst ehci_dmi_nohandoff_table[] = {
+static const struct dmi_system_id ehci_dmi_nohandoff_table[] = {
{
/* Pegatron Lucid (ExoPC) */
.matches = {
@@ -558,7 +558,7 @@
{ }
};
-static void __devinit ehci_bios_handoff(struct pci_dev *pdev,
+static void ehci_bios_handoff(struct pci_dev *pdev,
void __iomem *op_reg_base,
u32 cap, u8 offset)
{
@@ -626,7 +626,7 @@
writel(0, op_reg_base + EHCI_CONFIGFLAG);
}
-static void __devinit quirk_usb_disable_ehci(struct pci_dev *pdev)
+static void quirk_usb_disable_ehci(struct pci_dev *pdev)
{
void __iomem *base, *op_reg_base;
u32 hcc_params, cap, val;
@@ -723,6 +723,7 @@
}
#define PCI_DEVICE_ID_INTEL_LYNX_POINT_XHCI 0x8C31
+#define PCI_DEVICE_ID_INTEL_LYNX_POINT_LP_XHCI 0x9C31
bool usb_is_intel_ppt_switchable_xhci(struct pci_dev *pdev)
{
@@ -736,7 +737,8 @@
{
return pdev->class == PCI_CLASS_SERIAL_USB_XHCI &&
pdev->vendor == PCI_VENDOR_ID_INTEL &&
- pdev->device == PCI_DEVICE_ID_INTEL_LYNX_POINT_XHCI;
+ (pdev->device == PCI_DEVICE_ID_INTEL_LYNX_POINT_XHCI ||
+ pdev->device == PCI_DEVICE_ID_INTEL_LYNX_POINT_LP_XHCI);
}
bool usb_is_intel_switchable_xhci(struct pci_dev *pdev)
@@ -841,7 +843,7 @@
* and then waits 5 seconds for the BIOS to hand over control.
* If we timeout, assume the BIOS is broken and take control anyway.
*/
-static void __devinit quirk_usb_handoff_xhci(struct pci_dev *pdev)
+static void quirk_usb_handoff_xhci(struct pci_dev *pdev)
{
void __iomem *base;
int ext_cap_offset;
@@ -941,7 +943,7 @@
iounmap(base);
}
-static void __devinit quirk_usb_early_handoff(struct pci_dev *pdev)
+static void quirk_usb_early_handoff(struct pci_dev *pdev)
{
/* Skip Netlogic mips SoC's internal PCI USB controller.
* This device does not need/support EHCI/OHCI handoff
diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c
index fcc09e5..a6fd8f53 100644
--- a/drivers/usb/host/r8a66597-hcd.c
+++ b/drivers/usb/host/r8a66597-hcd.c
@@ -2036,10 +2036,8 @@
udev->parent->descriptor.bDeviceClass == USB_CLASS_HUB)
map[udev->devnum/32] |= (1 << (udev->devnum % 32));
- usb_hub_for_each_child(udev, chix, childdev) {
- if (childdev)
- collect_usb_address_map(childdev, map);
- }
+ usb_hub_for_each_child(udev, chix, childdev)
+ collect_usb_address_map(childdev, map);
}
/* this function must be called with interrupt disabled */
@@ -2393,7 +2391,7 @@
#define R8A66597_DEV_PM_OPS NULL
#endif
-static int __devexit r8a66597_remove(struct platform_device *pdev)
+static int r8a66597_remove(struct platform_device *pdev)
{
struct r8a66597 *r8a66597 = dev_get_drvdata(&pdev->dev);
struct usb_hcd *hcd = r8a66597_to_hcd(r8a66597);
@@ -2407,7 +2405,7 @@
return 0;
}
-static int __devinit r8a66597_probe(struct platform_device *pdev)
+static int r8a66597_probe(struct platform_device *pdev)
{
char clk_name[8];
struct resource *res = NULL, *ires;
@@ -2534,7 +2532,7 @@
static struct platform_driver r8a66597_driver = {
.probe = r8a66597_probe,
- .remove = __devexit_p(r8a66597_remove),
+ .remove = r8a66597_remove,
.driver = {
.name = (char *) hcd_name,
.owner = THIS_MODULE,
diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c
index 619b05f..d62f040 100644
--- a/drivers/usb/host/sl811-hcd.c
+++ b/drivers/usb/host/sl811-hcd.c
@@ -1595,7 +1595,7 @@
/*-------------------------------------------------------------------------*/
-static int __devexit
+static int
sl811h_remove(struct platform_device *dev)
{
struct usb_hcd *hcd = platform_get_drvdata(dev);
@@ -1618,7 +1618,7 @@
return 0;
}
-static int __devinit
+static int
sl811h_probe(struct platform_device *dev)
{
struct usb_hcd *hcd;
@@ -1808,7 +1808,7 @@
/* this driver is exported so sl811_cs can depend on it */
struct platform_driver sl811h_driver = {
.probe = sl811h_probe,
- .remove = __devexit_p(sl811h_remove),
+ .remove = sl811h_remove,
.suspend = sl811h_suspend,
.resume = sl811h_resume,
diff --git a/drivers/usb/host/ssb-hcd.c b/drivers/usb/host/ssb-hcd.c
index c2a29fa..74af2c6 100644
--- a/drivers/usb/host/ssb-hcd.c
+++ b/drivers/usb/host/ssb-hcd.c
@@ -39,7 +39,7 @@
u32 enable_flags;
};
-static void __devinit ssb_hcd_5354wa(struct ssb_device *dev)
+static void ssb_hcd_5354wa(struct ssb_device *dev)
{
#ifdef CONFIG_SSB_DRIVER_MIPS
/* Work around for 5354 failures */
@@ -53,7 +53,7 @@
#endif
}
-static void __devinit ssb_hcd_usb20wa(struct ssb_device *dev)
+static void ssb_hcd_usb20wa(struct ssb_device *dev)
{
if (dev->id.coreid == SSB_DEV_USB20_HOST) {
/*
@@ -80,7 +80,7 @@
}
/* based on arch/mips/brcm-boards/bcm947xx/pcibios.c */
-static u32 __devinit ssb_hcd_init_chip(struct ssb_device *dev)
+static u32 ssb_hcd_init_chip(struct ssb_device *dev)
{
u32 flags = 0;
@@ -101,8 +101,7 @@
static const struct usb_ohci_pdata ohci_pdata = {
};
-static struct platform_device * __devinit
-ssb_hcd_create_pdev(struct ssb_device *dev, bool ohci, u32 addr, u32 len)
+static struct platform_device *ssb_hcd_create_pdev(struct ssb_device *dev, bool ohci, u32 addr, u32 len)
{
struct platform_device *hci_dev;
struct resource hci_res[2];
@@ -148,7 +147,7 @@
return ERR_PTR(ret);
}
-static int __devinit ssb_hcd_probe(struct ssb_device *dev,
+static int ssb_hcd_probe(struct ssb_device *dev,
const struct ssb_device_id *id)
{
int err, tmp;
@@ -207,7 +206,7 @@
return err;
}
-static void __devexit ssb_hcd_remove(struct ssb_device *dev)
+static void ssb_hcd_remove(struct ssb_device *dev)
{
struct ssb_hcd_device *usb_dev = ssb_get_drvdata(dev);
struct platform_device *ohci_dev = usb_dev->ohci_dev;
@@ -221,7 +220,7 @@
ssb_device_disable(dev, 0);
}
-static void __devexit ssb_hcd_shutdown(struct ssb_device *dev)
+static void ssb_hcd_shutdown(struct ssb_device *dev)
{
ssb_device_disable(dev, 0);
}
@@ -249,7 +248,7 @@
#define ssb_hcd_resume NULL
#endif /* CONFIG_PM */
-static const struct ssb_device_id ssb_hcd_table[] __devinitconst = {
+static const struct ssb_device_id ssb_hcd_table[] = {
SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOSTDEV, SSB_ANY_REV),
SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOST, SSB_ANY_REV),
SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB20_HOST, SSB_ANY_REV),
@@ -261,7 +260,7 @@
.name = KBUILD_MODNAME,
.id_table = ssb_hcd_table,
.probe = ssb_hcd_probe,
- .remove = __devexit_p(ssb_hcd_remove),
+ .remove = ssb_hcd_remove,
.shutdown = ssb_hcd_shutdown,
.suspend = ssb_hcd_suspend,
.resume = ssb_hcd_resume,
diff --git a/drivers/usb/host/u132-hcd.c b/drivers/usb/host/u132-hcd.c
index dbbd1ba..5efdffe 100644
--- a/drivers/usb/host/u132-hcd.c
+++ b/drivers/usb/host/u132-hcd.c
@@ -2990,7 +2990,7 @@
* synchronously - but instead should immediately stop activity to the
* device and asynchronously call usb_remove_hcd()
*/
-static int __devexit u132_remove(struct platform_device *pdev)
+static int u132_remove(struct platform_device *pdev)
{
struct usb_hcd *hcd = platform_get_drvdata(pdev);
if (hcd) {
@@ -3084,7 +3084,7 @@
mutex_unlock(&u132->sw_lock);
}
-static int __devinit u132_probe(struct platform_device *pdev)
+static int u132_probe(struct platform_device *pdev)
{
struct usb_hcd *hcd;
int retval;
@@ -3212,7 +3212,7 @@
*/
static struct platform_driver u132_platform_driver = {
.probe = u132_probe,
- .remove = __devexit_p(u132_remove),
+ .remove = u132_remove,
.suspend = u132_suspend,
.resume = u132_resume,
.driver = {
diff --git a/drivers/usb/host/uhci-grlib.c b/drivers/usb/host/uhci-grlib.c
index f7a6213..511bfc4 100644
--- a/drivers/usb/host/uhci-grlib.c
+++ b/drivers/usb/host/uhci-grlib.c
@@ -85,7 +85,7 @@
};
-static int __devinit uhci_hcd_grlib_probe(struct platform_device *op)
+static int uhci_hcd_grlib_probe(struct platform_device *op)
{
struct device_node *dn = op->dev.of_node;
struct usb_hcd *hcd;
diff --git a/drivers/usb/host/uhci-platform.c b/drivers/usb/host/uhci-platform.c
index 68ebf20..8c4dace 100644
--- a/drivers/usb/host/uhci-platform.c
+++ b/drivers/usb/host/uhci-platform.c
@@ -62,7 +62,7 @@
static u64 platform_uhci_dma_mask = DMA_BIT_MASK(32);
-static int __devinit uhci_hcd_platform_probe(struct platform_device *pdev)
+static int uhci_hcd_platform_probe(struct platform_device *pdev)
{
struct usb_hcd *hcd;
struct uhci_hcd *uhci;
diff --git a/drivers/usb/host/uhci-q.c b/drivers/usb/host/uhci-q.c
index d2c6f5a..15921fd 100644
--- a/drivers/usb/host/uhci-q.c
+++ b/drivers/usb/host/uhci-q.c
@@ -1256,7 +1256,8 @@
struct uhci_qh *qh)
{
struct uhci_td *td = NULL; /* Since urb->number_of_packets > 0 */
- int i, frame;
+ int i;
+ unsigned frame, next;
unsigned long destination, status;
struct urb_priv *urbp = (struct urb_priv *) urb->hcpriv;
@@ -1265,37 +1266,29 @@
urb->number_of_packets >= UHCI_NUMFRAMES)
return -EFBIG;
+ uhci_get_current_frame_number(uhci);
+
/* Check the period and figure out the starting frame number */
if (!qh->bandwidth_reserved) {
qh->period = urb->interval;
- if (urb->transfer_flags & URB_ISO_ASAP) {
- qh->phase = -1; /* Find the best phase */
- i = uhci_check_bandwidth(uhci, qh);
- if (i)
- return i;
+ qh->phase = -1; /* Find the best phase */
+ i = uhci_check_bandwidth(uhci, qh);
+ if (i)
+ return i;
- /* Allow a little time to allocate the TDs */
- uhci_get_current_frame_number(uhci);
- frame = uhci->frame_number + 10;
+ /* Allow a little time to allocate the TDs */
+ next = uhci->frame_number + 10;
+ frame = qh->phase;
- /* Move forward to the first frame having the
- * correct phase */
- urb->start_frame = frame + ((qh->phase - frame) &
- (qh->period - 1));
- } else {
- i = urb->start_frame - uhci->last_iso_frame;
- if (i <= 0 || i >= UHCI_NUMFRAMES)
- return -EINVAL;
- qh->phase = urb->start_frame & (qh->period - 1);
- i = uhci_check_bandwidth(uhci, qh);
- if (i)
- return i;
- }
+ /* Round up to the first available slot */
+ frame += (next - frame + qh->period - 1) & -qh->period;
} else if (qh->period != urb->interval) {
return -EINVAL; /* Can't change the period */
} else {
+ next = uhci->frame_number + 2;
+
/* Find the next unused frame */
if (list_empty(&qh->queue)) {
frame = qh->iso_frame;
@@ -1308,25 +1301,31 @@
lurb->number_of_packets *
lurb->interval;
}
- if (urb->transfer_flags & URB_ISO_ASAP) {
- /* Skip some frames if necessary to insure
- * the start frame is in the future.
+
+ /* Fell behind? */
+ if (uhci_frame_before_eq(frame, next)) {
+
+ /* USB_ISO_ASAP: Round up to the first available slot */
+ if (urb->transfer_flags & URB_ISO_ASAP)
+ frame += (next - frame + qh->period - 1) &
+ -qh->period;
+
+ /*
+ * Not ASAP: Use the next slot in the stream. If
+ * the entire URB falls before the threshold, fail.
*/
- uhci_get_current_frame_number(uhci);
- if (uhci_frame_before_eq(frame, uhci->frame_number)) {
- frame = uhci->frame_number + 1;
- frame += ((qh->phase - frame) &
- (qh->period - 1));
- }
- } /* Otherwise pick up where the last URB leaves off */
- urb->start_frame = frame;
+ else if (!uhci_frame_before_eq(next,
+ frame + (urb->number_of_packets - 1) *
+ qh->period))
+ return -EXDEV;
+ }
}
/* Make sure we won't have to go too far into the future */
if (uhci_frame_before_eq(uhci->last_iso_frame + UHCI_NUMFRAMES,
- urb->start_frame + urb->number_of_packets *
- urb->interval))
+ frame + urb->number_of_packets * urb->interval))
return -EFBIG;
+ urb->start_frame = frame;
status = TD_CTRL_ACTIVE | TD_CTRL_IOS;
destination = (urb->pipe & PIPE_DEVEP_MASK) | usb_packetid(urb->pipe);
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 487bc08..fb51c70 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -205,7 +205,12 @@
next = xhci_segment_alloc(xhci, cycle_state, flags);
if (!next) {
- xhci_free_segments_for_ring(xhci, *first);
+ prev = *first;
+ while (prev) {
+ next = prev->next;
+ xhci_segment_free(xhci, prev);
+ prev = next;
+ }
return -ENOMEM;
}
xhci_link_segments(xhci, prev, next, type);
@@ -258,7 +263,7 @@
return ring;
fail:
- xhci_ring_free(xhci, ring);
+ kfree(ring);
return NULL;
}
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 8345d7c..af259e0 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -29,6 +29,7 @@
/* Device for a quirk */
#define PCI_VENDOR_ID_FRESCO_LOGIC 0x1b73
#define PCI_DEVICE_ID_FRESCO_LOGIC_PDK 0x1000
+#define PCI_DEVICE_ID_FRESCO_LOGIC_FL1400 0x1400
#define PCI_VENDOR_ID_ETRON 0x1b6f
#define PCI_DEVICE_ID_ASROCK_P67 0x7023
@@ -58,8 +59,10 @@
/* Look for vendor-specific quirks */
if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC &&
- pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK) {
- if (pdev->revision == 0x0) {
+ (pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK ||
+ pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_FL1400)) {
+ if (pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK &&
+ pdev->revision == 0x0) {
xhci->quirks |= XHCI_RESET_EP_QUIRK;
xhci_dbg(xhci, "QUIRK: Fresco Logic xHC needs configure"
" endpoint cmd after reset endpoint\n");
@@ -218,15 +221,8 @@
static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
{
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
- int retval = 0;
- if (hcd->state != HC_STATE_SUSPENDED ||
- xhci->shared_hcd->state != HC_STATE_SUSPENDED)
- return -EINVAL;
-
- retval = xhci_suspend(xhci);
-
- return retval;
+ return xhci_suspend(xhci);
}
static int xhci_pci_resume(struct usb_hcd *hcd, bool hibernated)
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 4e1a894..cbb44b7 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -318,7 +318,7 @@
* seconds), then it should assume that the there are
* larger problems with the xHC and assert HCRST.
*/
- ret = handshake(xhci, &xhci->op_regs->cmd_ring,
+ ret = xhci_handshake(xhci, &xhci->op_regs->cmd_ring,
CMD_RING_RUNNING, 0, 5 * 1000 * 1000);
if (ret < 0) {
xhci_err(xhci, "Stopped the command ring failed, "
@@ -3071,11 +3071,11 @@
}
/*
- * For xHCI 1.0 host controllers, TD size is the number of packets remaining in
- * the TD (*not* including this TRB).
+ * For xHCI 1.0 host controllers, TD size is the number of max packet sized
+ * packets remaining in the TD (*not* including this TRB).
*
* Total TD packet count = total_packet_count =
- * roundup(TD size in bytes / wMaxPacketSize)
+ * DIV_ROUND_UP(TD size in bytes / wMaxPacketSize)
*
* Packets transferred up to and including this TRB = packets_transferred =
* rounddown(total bytes transferred including this TRB / wMaxPacketSize)
@@ -3083,15 +3083,16 @@
* TD size = total_packet_count - packets_transferred
*
* It must fit in bits 21:17, so it can't be bigger than 31.
+ * The last TRB in a TD must have the TD size set to zero.
*/
-
static u32 xhci_v1_0_td_remainder(int running_total, int trb_buff_len,
- unsigned int total_packet_count, struct urb *urb)
+ unsigned int total_packet_count, struct urb *urb,
+ unsigned int num_trbs_left)
{
int packets_transferred;
/* One TRB with a zero-length data packet. */
- if (running_total == 0 && trb_buff_len == 0)
+ if (num_trbs_left == 0 || (running_total == 0 && trb_buff_len == 0))
return 0;
/* All the TRB queueing functions don't count the current TRB in
@@ -3100,7 +3101,9 @@
packets_transferred = (running_total + trb_buff_len) /
usb_endpoint_maxp(&urb->ep->desc);
- return xhci_td_remainder(total_packet_count - packets_transferred);
+ if ((total_packet_count - packets_transferred) > 31)
+ return 31 << 17;
+ return (total_packet_count - packets_transferred) << 17;
}
static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
@@ -3127,7 +3130,7 @@
num_trbs = count_sg_trbs_needed(xhci, urb);
num_sgs = urb->num_mapped_sgs;
- total_packet_count = roundup(urb->transfer_buffer_length,
+ total_packet_count = DIV_ROUND_UP(urb->transfer_buffer_length,
usb_endpoint_maxp(&urb->ep->desc));
trb_buff_len = prepare_transfer(xhci, xhci->devs[slot_id],
@@ -3210,7 +3213,8 @@
running_total);
} else {
remainder = xhci_v1_0_td_remainder(running_total,
- trb_buff_len, total_packet_count, urb);
+ trb_buff_len, total_packet_count, urb,
+ num_trbs - 1);
}
length_field = TRB_LEN(trb_buff_len) |
remainder |
@@ -3318,7 +3322,7 @@
start_cycle = ep_ring->cycle_state;
running_total = 0;
- total_packet_count = roundup(urb->transfer_buffer_length,
+ total_packet_count = DIV_ROUND_UP(urb->transfer_buffer_length,
usb_endpoint_maxp(&urb->ep->desc));
/* How much data is in the first TRB? */
addr = (u64) urb->transfer_dma;
@@ -3364,7 +3368,8 @@
running_total);
} else {
remainder = xhci_v1_0_td_remainder(running_total,
- trb_buff_len, total_packet_count, urb);
+ trb_buff_len, total_packet_count, urb,
+ num_trbs - 1);
}
length_field = TRB_LEN(trb_buff_len) |
remainder |
@@ -3627,7 +3632,7 @@
addr = start_addr + urb->iso_frame_desc[i].offset;
td_len = urb->iso_frame_desc[i].length;
td_remain_len = td_len;
- total_packet_count = roundup(td_len,
+ total_packet_count = DIV_ROUND_UP(td_len,
usb_endpoint_maxp(&urb->ep->desc));
/* A zero-length transfer still involves at least one packet. */
if (total_packet_count == 0)
@@ -3706,7 +3711,8 @@
} else {
remainder = xhci_v1_0_td_remainder(
running_total, trb_buff_len,
- total_packet_count, urb);
+ total_packet_count, urb,
+ (trbs_per_td - j - 1));
}
length_field = TRB_LEN(trb_buff_len) |
remainder |
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index c9e419f..5c72c43 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -40,7 +40,7 @@
/* TODO: copied from ehci-hcd.c - can this be refactored? */
/*
- * handshake - spin reading hc until handshake completes or fails
+ * xhci_handshake - spin reading hc until handshake completes or fails
* @ptr: address of hc register to be read
* @mask: bits to look at in result of read
* @done: value of those bits when handshake succeeds
@@ -52,7 +52,7 @@
* handshake done). There are two failure modes: "usec" have passed (major
* hardware flakeout), or the register reads as all-ones (hardware removed).
*/
-int handshake(struct xhci_hcd *xhci, void __iomem *ptr,
+int xhci_handshake(struct xhci_hcd *xhci, void __iomem *ptr,
u32 mask, u32 done, int usec)
{
u32 result;
@@ -103,7 +103,7 @@
xhci_dbg(xhci, "// Halt the HC\n");
xhci_quiesce(xhci);
- ret = handshake(xhci, &xhci->op_regs->status,
+ ret = xhci_handshake(xhci, &xhci->op_regs->status,
STS_HALT, STS_HALT, XHCI_MAX_HALT_USEC);
if (!ret) {
xhci->xhc_state |= XHCI_STATE_HALTED;
@@ -132,7 +132,7 @@
* Wait for the HCHalted Status bit to be 0 to indicate the host is
* running.
*/
- ret = handshake(xhci, &xhci->op_regs->status,
+ ret = xhci_handshake(xhci, &xhci->op_regs->status,
STS_HALT, 0, XHCI_MAX_HALT_USEC);
if (ret == -ETIMEDOUT)
xhci_err(xhci, "Host took too long to start, "
@@ -167,7 +167,7 @@
command |= CMD_RESET;
xhci_writel(xhci, command, &xhci->op_regs->command);
- ret = handshake(xhci, &xhci->op_regs->command,
+ ret = xhci_handshake(xhci, &xhci->op_regs->command,
CMD_RESET, 0, 10 * 1000 * 1000);
if (ret)
return ret;
@@ -177,7 +177,7 @@
* xHCI cannot write to any doorbells or operational registers other
* than status until the "Controller Not Ready" flag is cleared.
*/
- ret = handshake(xhci, &xhci->op_regs->status,
+ ret = xhci_handshake(xhci, &xhci->op_regs->status,
STS_CNR, 0, 10 * 1000 * 1000);
for (i = 0; i < 2; ++i) {
@@ -480,7 +480,7 @@
if (strstr(dmi_product_name, "Z420") ||
strstr(dmi_product_name, "Z620") ||
strstr(dmi_product_name, "Z820") ||
- strstr(dmi_product_name, "Z1"))
+ strstr(dmi_product_name, "Z1 Workstation"))
return true;
return false;
@@ -880,6 +880,10 @@
struct usb_hcd *hcd = xhci_to_hcd(xhci);
u32 command;
+ if (hcd->state != HC_STATE_SUSPENDED ||
+ xhci->shared_hcd->state != HC_STATE_SUSPENDED)
+ return -EINVAL;
+
spin_lock_irq(&xhci->lock);
clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
clear_bit(HCD_FLAG_HW_ACCESSIBLE, &xhci->shared_hcd->flags);
@@ -890,7 +894,7 @@
command = xhci_readl(xhci, &xhci->op_regs->command);
command &= ~CMD_RUN;
xhci_writel(xhci, command, &xhci->op_regs->command);
- if (handshake(xhci, &xhci->op_regs->status,
+ if (xhci_handshake(xhci, &xhci->op_regs->status,
STS_HALT, STS_HALT, XHCI_MAX_HALT_USEC)) {
xhci_warn(xhci, "WARN: xHC CMD_RUN timeout\n");
spin_unlock_irq(&xhci->lock);
@@ -905,7 +909,8 @@
command = xhci_readl(xhci, &xhci->op_regs->command);
command |= CMD_CSS;
xhci_writel(xhci, command, &xhci->op_regs->command);
- if (handshake(xhci, &xhci->op_regs->status, STS_SAVE, 0, 10 * 1000)) {
+ if (xhci_handshake(xhci, &xhci->op_regs->status,
+ STS_SAVE, 0, 10 * 1000)) {
xhci_warn(xhci, "WARN: xHC save state timeout\n");
spin_unlock_irq(&xhci->lock);
return -ETIMEDOUT;
@@ -967,7 +972,7 @@
command = xhci_readl(xhci, &xhci->op_regs->command);
command |= CMD_CRS;
xhci_writel(xhci, command, &xhci->op_regs->command);
- if (handshake(xhci, &xhci->op_regs->status,
+ if (xhci_handshake(xhci, &xhci->op_regs->status,
STS_RESTORE, 0, 10 * 1000)) {
xhci_warn(xhci, "WARN: xHC restore state timeout\n");
spin_unlock_irq(&xhci->lock);
@@ -1035,7 +1040,7 @@
command = xhci_readl(xhci, &xhci->op_regs->command);
command |= CMD_RUN;
xhci_writel(xhci, command, &xhci->op_regs->command);
- handshake(xhci, &xhci->op_regs->status, STS_HALT,
+ xhci_handshake(xhci, &xhci->op_regs->status, STS_HALT,
0, 250 * 1000);
/* step 5: walk topology and initialize portsc,
@@ -2254,7 +2259,7 @@
static bool xhci_is_sync_in_ep(unsigned int ep_type)
{
- return (ep_type == ISOC_IN_EP || ep_type != INT_IN_EP);
+ return (ep_type == ISOC_IN_EP || ep_type == INT_IN_EP);
}
static unsigned int xhci_get_ss_bw_consumed(struct xhci_bw_info *ep_bw)
@@ -3874,7 +3879,8 @@
spin_lock_irqsave(&xhci->lock, flags);
/* Check L1 Status */
- ret = handshake(xhci, pm_addr, PORT_L1S_MASK, PORT_L1S_SUCCESS, 125);
+ ret = xhci_handshake(xhci, pm_addr,
+ PORT_L1S_MASK, PORT_L1S_SUCCESS, 125);
if (ret != -ETIMEDOUT) {
/* enter L1 successfully */
temp = xhci_readl(xhci, addr);
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 53df4e7..f791bd0 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1720,7 +1720,7 @@
/* xHCI host controller glue */
typedef void (*xhci_get_quirks_t)(struct device *, struct xhci_hcd *);
-int handshake(struct xhci_hcd *xhci, void __iomem *ptr,
+int xhci_handshake(struct xhci_hcd *xhci, void __iomem *ptr,
u32 mask, u32 done, int usec);
void xhci_quiesce(struct xhci_hcd *xhci);
int xhci_halt(struct xhci_hcd *xhci);
diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig
index a8f0523..fecde69 100644
--- a/drivers/usb/misc/Kconfig
+++ b/drivers/usb/misc/Kconfig
@@ -246,6 +246,7 @@
config USB_EZUSB_FX2
tristate "Functions for loading firmware on EZUSB chips"
+ depends on USB
help
Say Y here if you need EZUSB device support.
(Cypress FX/FX2/FX2LP microcontrollers)
diff --git a/drivers/usb/misc/ezusb.c b/drivers/usb/misc/ezusb.c
index 6589268..e712afe 100644
--- a/drivers/usb/misc/ezusb.c
+++ b/drivers/usb/misc/ezusb.c
@@ -15,6 +15,7 @@
#include <linux/usb.h>
#include <linux/firmware.h>
#include <linux/ihex.h>
+#include <linux/usb/ezusb.h>
struct ezusb_fx_type {
/* EZ-USB Control and Status Register. Bit 0 controls 8051 reset */
@@ -22,21 +23,16 @@
unsigned short max_internal_adress;
};
-struct ezusb_fx_type ezusb_fx1 = {
+static struct ezusb_fx_type ezusb_fx1 = {
.cpucs_reg = 0x7F92,
.max_internal_adress = 0x1B3F,
};
-struct ezusb_fx_type ezusb_fx2 = {
- .cpucs_reg = 0xE600,
- .max_internal_adress = 0x3FFF,
-};
-
/* Commands for writing to memory */
#define WRITE_INT_RAM 0xA0
#define WRITE_EXT_RAM 0xA3
-int ezusb_writememory(struct usb_device *dev, int address,
+static int ezusb_writememory(struct usb_device *dev, int address,
unsigned char *data, int length, __u8 request)
{
int result;
@@ -58,10 +54,9 @@
kfree(transfer_buffer);
return result;
}
-EXPORT_SYMBOL_GPL(ezusb_writememory);
-int ezusb_set_reset(struct usb_device *dev, unsigned short cpucs_reg,
- unsigned char reset_bit)
+static int ezusb_set_reset(struct usb_device *dev, unsigned short cpucs_reg,
+ unsigned char reset_bit)
{
int response = ezusb_writememory(dev, cpucs_reg, &reset_bit, 1, WRITE_INT_RAM);
if (response < 0)
@@ -76,12 +71,6 @@
}
EXPORT_SYMBOL_GPL(ezusb_fx1_set_reset);
-int ezusb_fx2_set_reset(struct usb_device *dev, unsigned char reset_bit)
-{
- return ezusb_set_reset(dev, ezusb_fx2.cpucs_reg, reset_bit);
-}
-EXPORT_SYMBOL_GPL(ezusb_fx2_set_reset);
-
static int ezusb_ihex_firmware_download(struct usb_device *dev,
struct ezusb_fx_type fx,
const char *firmware_path)
@@ -151,11 +140,28 @@
}
EXPORT_SYMBOL_GPL(ezusb_fx1_ihex_firmware_download);
+#if 0
+/*
+ * Once someone one needs these fx2 functions, uncomment them
+ * and add them to ezusb.h and all should be good.
+ */
+static struct ezusb_fx_type ezusb_fx2 = {
+ .cpucs_reg = 0xE600,
+ .max_internal_adress = 0x3FFF,
+};
+
+int ezusb_fx2_set_reset(struct usb_device *dev, unsigned char reset_bit)
+{
+ return ezusb_set_reset(dev, ezusb_fx2.cpucs_reg, reset_bit);
+}
+EXPORT_SYMBOL_GPL(ezusb_fx2_set_reset);
+
int ezusb_fx2_ihex_firmware_download(struct usb_device *dev,
const char *firmware_path)
{
return ezusb_ihex_firmware_download(dev, ezusb_fx2, firmware_path);
}
EXPORT_SYMBOL_GPL(ezusb_fx2_ihex_firmware_download);
+#endif
MODULE_LICENSE("GPL");
diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c
index 055b84a..7667b12 100644
--- a/drivers/usb/misc/usbtest.c
+++ b/drivers/usb/misc/usbtest.c
@@ -423,6 +423,9 @@
unsigned i;
unsigned size = max;
+ if (max == 0)
+ return NULL;
+
sg = kmalloc_array(nents, sizeof *sg, GFP_KERNEL);
if (!sg)
return NULL;
@@ -2386,6 +2389,7 @@
.name = "Linux gadget zero",
.autoconf = 1,
.ctrl_out = 1,
+ .iso = 1,
.alt = 0,
};
diff --git a/drivers/usb/musb/am35x.c b/drivers/usb/musb/am35x.c
index c964d6a..3d1c71b 100644
--- a/drivers/usb/musb/am35x.c
+++ b/drivers/usb/musb/am35x.c
@@ -455,7 +455,7 @@
static u64 am35x_dmamask = DMA_BIT_MASK(32);
-static int __devinit am35x_probe(struct platform_device *pdev)
+static int am35x_probe(struct platform_device *pdev)
{
struct musb_hdrc_platform_data *pdata = pdev->dev.platform_data;
struct platform_device *musb;
@@ -465,7 +465,6 @@
struct clk *clk;
int ret = -ENOMEM;
- int musbid;
glue = kzalloc(sizeof(*glue), GFP_KERNEL);
if (!glue) {
@@ -473,18 +472,10 @@
goto err0;
}
- /* get the musb id */
- musbid = musb_get_id(&pdev->dev, GFP_KERNEL);
- if (musbid < 0) {
- dev_err(&pdev->dev, "failed to allocate musb id\n");
- ret = -ENOMEM;
- goto err1;
- }
-
- musb = platform_device_alloc("musb-hdrc", musbid);
+ musb = platform_device_alloc("musb-hdrc", PLATFORM_DEVID_AUTO);
if (!musb) {
dev_err(&pdev->dev, "failed to allocate musb device\n");
- goto err2;
+ goto err1;
}
phy_clk = clk_get(&pdev->dev, "fck");
@@ -513,7 +504,6 @@
goto err6;
}
- musb->id = musbid;
musb->dev.parent = &pdev->dev;
musb->dev.dma_mask = &am35x_dmamask;
musb->dev.coherent_dma_mask = am35x_dmamask;
@@ -563,9 +553,6 @@
err3:
platform_device_put(musb);
-err2:
- musb_put_id(&pdev->dev, musbid);
-
err1:
kfree(glue);
@@ -573,13 +560,11 @@
return ret;
}
-static int __devexit am35x_remove(struct platform_device *pdev)
+static int am35x_remove(struct platform_device *pdev)
{
struct am35x_glue *glue = platform_get_drvdata(pdev);
- musb_put_id(&pdev->dev, glue->musb->id);
- platform_device_del(glue->musb);
- platform_device_put(glue->musb);
+ platform_device_unregister(glue->musb);
clk_disable(glue->clk);
clk_disable(glue->phy_clk);
clk_put(glue->clk);
@@ -644,7 +629,7 @@
static struct platform_driver am35x_driver = {
.probe = am35x_probe,
- .remove = __devexit_p(am35x_remove),
+ .remove = am35x_remove,
.driver = {
.name = "musb-am35x",
.pm = DEV_PM_OPS,
@@ -654,15 +639,4 @@
MODULE_DESCRIPTION("AM35x MUSB Glue Layer");
MODULE_AUTHOR("Ajay Kumar Gupta <ajay.gupta@ti.com>");
MODULE_LICENSE("GPL v2");
-
-static int __init am35x_init(void)
-{
- return platform_driver_register(&am35x_driver);
-}
-module_init(am35x_init);
-
-static void __exit am35x_exit(void)
-{
- platform_driver_unregister(&am35x_driver);
-}
-module_exit(am35x_exit);
+module_platform_driver(am35x_driver);
diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c
index e8cff9b..14dab9f 100644
--- a/drivers/usb/musb/blackfin.c
+++ b/drivers/usb/musb/blackfin.c
@@ -448,14 +448,13 @@
static u64 bfin_dmamask = DMA_BIT_MASK(32);
-static int __devinit bfin_probe(struct platform_device *pdev)
+static int bfin_probe(struct platform_device *pdev)
{
struct musb_hdrc_platform_data *pdata = pdev->dev.platform_data;
struct platform_device *musb;
struct bfin_glue *glue;
int ret = -ENOMEM;
- int musbid;
glue = kzalloc(sizeof(*glue), GFP_KERNEL);
if (!glue) {
@@ -463,21 +462,12 @@
goto err0;
}
- /* get the musb id */
- musbid = musb_get_id(&pdev->dev, GFP_KERNEL);
- if (musbid < 0) {
- dev_err(&pdev->dev, "failed to allocate musb id\n");
- ret = -ENOMEM;
+ musb = platform_device_alloc("musb-hdrc", PLATFORM_DEVID_AUTO);
+ if (!musb) {
+ dev_err(&pdev->dev, "failed to allocate musb device\n");
goto err1;
}
- musb = platform_device_alloc("musb-hdrc", musbid);
- if (!musb) {
- dev_err(&pdev->dev, "failed to allocate musb device\n");
- goto err2;
- }
-
- musb->id = musbid;
musb->dev.parent = &pdev->dev;
musb->dev.dma_mask = &bfin_dmamask;
musb->dev.coherent_dma_mask = bfin_dmamask;
@@ -513,9 +503,6 @@
err3:
platform_device_put(musb);
-err2:
- musb_put_id(&pdev->dev, musbid);
-
err1:
kfree(glue);
@@ -523,13 +510,11 @@
return ret;
}
-static int __devexit bfin_remove(struct platform_device *pdev)
+static int bfin_remove(struct platform_device *pdev)
{
struct bfin_glue *glue = platform_get_drvdata(pdev);
- musb_put_id(&pdev->dev, glue->musb->id);
- platform_device_del(glue->musb);
- platform_device_put(glue->musb);
+ platform_device_unregister(glue->musb);
kfree(glue);
return 0;
@@ -585,15 +570,4 @@
MODULE_DESCRIPTION("Blackfin MUSB Glue Layer");
MODULE_AUTHOR("Bryan Wy <cooloney@kernel.org>");
MODULE_LICENSE("GPL v2");
-
-static int __init bfin_init(void)
-{
- return platform_driver_register(&bfin_driver);
-}
-module_init(bfin_init);
-
-static void __exit bfin_exit(void)
-{
- platform_driver_unregister(&bfin_driver);
-}
-module_exit(bfin_exit);
+module_platform_driver(bfin_driver);
diff --git a/drivers/usb/musb/cppi_dma.c b/drivers/usb/musb/cppi_dma.c
index e19da82..0968dd7 100644
--- a/drivers/usb/musb/cppi_dma.c
+++ b/drivers/usb/musb/cppi_dma.c
@@ -1314,10 +1314,10 @@
return IRQ_HANDLED;
}
+EXPORT_SYMBOL_GPL(cppi_interrupt);
/* Instantiate a software object representing a DMA controller. */
-struct dma_controller *__devinit
-dma_controller_create(struct musb *musb, void __iomem *mregs)
+struct dma_controller *dma_controller_create(struct musb *musb, void __iomem *mregs)
{
struct cppi *controller;
struct device *dev = musb->controller;
diff --git a/drivers/usb/musb/da8xx.c b/drivers/usb/musb/da8xx.c
index 8bc44b7..97996af 100644
--- a/drivers/usb/musb/da8xx.c
+++ b/drivers/usb/musb/da8xx.c
@@ -471,7 +471,7 @@
static u64 da8xx_dmamask = DMA_BIT_MASK(32);
-static int __devinit da8xx_probe(struct platform_device *pdev)
+static int da8xx_probe(struct platform_device *pdev)
{
struct musb_hdrc_platform_data *pdata = pdev->dev.platform_data;
struct platform_device *musb;
@@ -480,7 +480,6 @@
struct clk *clk;
int ret = -ENOMEM;
- int musbid;
glue = kzalloc(sizeof(*glue), GFP_KERNEL);
if (!glue) {
@@ -488,18 +487,10 @@
goto err0;
}
- /* get the musb id */
- musbid = musb_get_id(&pdev->dev, GFP_KERNEL);
- if (musbid < 0) {
- dev_err(&pdev->dev, "failed to allocate musb id\n");
- ret = -ENOMEM;
- goto err1;
- }
-
- musb = platform_device_alloc("musb-hdrc", musbid);
+ musb = platform_device_alloc("musb-hdrc", PLATFORM_DEVID_AUTO);
if (!musb) {
dev_err(&pdev->dev, "failed to allocate musb device\n");
- goto err2;
+ goto err1;
}
clk = clk_get(&pdev->dev, "usb20");
@@ -515,7 +506,6 @@
goto err4;
}
- musb->id = musbid;
musb->dev.parent = &pdev->dev;
musb->dev.dma_mask = &da8xx_dmamask;
musb->dev.coherent_dma_mask = da8xx_dmamask;
@@ -558,9 +548,6 @@
err3:
platform_device_put(musb);
-err2:
- musb_put_id(&pdev->dev, musbid);
-
err1:
kfree(glue);
@@ -568,13 +555,11 @@
return ret;
}
-static int __devexit da8xx_remove(struct platform_device *pdev)
+static int da8xx_remove(struct platform_device *pdev)
{
struct da8xx_glue *glue = platform_get_drvdata(pdev);
- musb_put_id(&pdev->dev, glue->musb->id);
- platform_device_del(glue->musb);
- platform_device_put(glue->musb);
+ platform_device_unregister(glue->musb);
clk_disable(glue->clk);
clk_put(glue->clk);
kfree(glue);
@@ -584,7 +569,7 @@
static struct platform_driver da8xx_driver = {
.probe = da8xx_probe,
- .remove = __devexit_p(da8xx_remove),
+ .remove = da8xx_remove,
.driver = {
.name = "musb-da8xx",
},
@@ -593,15 +578,4 @@
MODULE_DESCRIPTION("DA8xx/OMAP-L1x MUSB Glue Layer");
MODULE_AUTHOR("Sergei Shtylyov <sshtylyov@ru.mvista.com>");
MODULE_LICENSE("GPL v2");
-
-static int __init da8xx_init(void)
-{
- return platform_driver_register(&da8xx_driver);
-}
-module_init(da8xx_init);
-
-static void __exit da8xx_exit(void)
-{
- platform_driver_unregister(&da8xx_driver);
-}
-module_exit(da8xx_exit);
+module_platform_driver(da8xx_driver);
diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c
index 606bfd0..b1c01ca 100644
--- a/drivers/usb/musb/davinci.c
+++ b/drivers/usb/musb/davinci.c
@@ -504,7 +504,7 @@
static u64 davinci_dmamask = DMA_BIT_MASK(32);
-static int __devinit davinci_probe(struct platform_device *pdev)
+static int davinci_probe(struct platform_device *pdev)
{
struct musb_hdrc_platform_data *pdata = pdev->dev.platform_data;
struct platform_device *musb;
@@ -512,7 +512,6 @@
struct clk *clk;
int ret = -ENOMEM;
- int musbid;
glue = kzalloc(sizeof(*glue), GFP_KERNEL);
if (!glue) {
@@ -520,18 +519,10 @@
goto err0;
}
- /* get the musb id */
- musbid = musb_get_id(&pdev->dev, GFP_KERNEL);
- if (musbid < 0) {
- dev_err(&pdev->dev, "failed to allocate musb id\n");
- ret = -ENOMEM;
- goto err1;
- }
-
- musb = platform_device_alloc("musb-hdrc", musbid);
+ musb = platform_device_alloc("musb-hdrc", PLATFORM_DEVID_AUTO);
if (!musb) {
dev_err(&pdev->dev, "failed to allocate musb device\n");
- goto err2;
+ goto err1;
}
clk = clk_get(&pdev->dev, "usb");
@@ -547,7 +538,6 @@
goto err4;
}
- musb->id = musbid;
musb->dev.parent = &pdev->dev;
musb->dev.dma_mask = &davinci_dmamask;
musb->dev.coherent_dma_mask = davinci_dmamask;
@@ -590,9 +580,6 @@
err3:
platform_device_put(musb);
-err2:
- musb_put_id(&pdev->dev, musbid);
-
err1:
kfree(glue);
@@ -600,13 +587,11 @@
return ret;
}
-static int __devexit davinci_remove(struct platform_device *pdev)
+static int davinci_remove(struct platform_device *pdev)
{
struct davinci_glue *glue = platform_get_drvdata(pdev);
- musb_put_id(&pdev->dev, glue->musb->id);
- platform_device_del(glue->musb);
- platform_device_put(glue->musb);
+ platform_device_unregister(glue->musb);
clk_disable(glue->clk);
clk_put(glue->clk);
kfree(glue);
@@ -616,7 +601,7 @@
static struct platform_driver davinci_driver = {
.probe = davinci_probe,
- .remove = __devexit_p(davinci_remove),
+ .remove = davinci_remove,
.driver = {
.name = "musb-davinci",
},
@@ -625,15 +610,4 @@
MODULE_DESCRIPTION("DaVinci MUSB Glue Layer");
MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");
MODULE_LICENSE("GPL v2");
-
-static int __init davinci_init(void)
-{
- return platform_driver_register(&davinci_driver);
-}
-module_init(davinci_init);
-
-static void __exit davinci_exit(void)
-{
- platform_driver_unregister(&davinci_driver);
-}
-module_exit(davinci_exit);
+module_platform_driver(davinci_driver);
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index bb56a0e..57cc9c6 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -116,7 +116,6 @@
#define MUSB_DRIVER_NAME "musb-hdrc"
const char musb_driver_name[] = MUSB_DRIVER_NAME;
-static DEFINE_IDA(musb_ida);
MODULE_DESCRIPTION(DRIVER_INFO);
MODULE_AUTHOR(DRIVER_AUTHOR);
@@ -133,35 +132,6 @@
/*-------------------------------------------------------------------------*/
-int musb_get_id(struct device *dev, gfp_t gfp_mask)
-{
- int ret;
- int id;
-
- ret = ida_pre_get(&musb_ida, gfp_mask);
- if (!ret) {
- dev_err(dev, "failed to reserve resource for id\n");
- return -ENOMEM;
- }
-
- ret = ida_get_new(&musb_ida, &id);
- if (ret < 0) {
- dev_err(dev, "failed to allocate a new id\n");
- return ret;
- }
-
- return id;
-}
-EXPORT_SYMBOL_GPL(musb_get_id);
-
-void musb_put_id(struct device *dev, int id)
-{
-
- dev_dbg(dev, "removing id %d\n", id);
- ida_remove(&musb_ida, id);
-}
-EXPORT_SYMBOL_GPL(musb_put_id);
-
#ifndef CONFIG_BLACKFIN
static int musb_ulpi_read(struct usb_phy *phy, u32 offset)
{
@@ -467,12 +437,12 @@
*/
static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
- u8 devctl, u8 power)
+ u8 devctl)
{
struct usb_otg *otg = musb->xceiv->otg;
irqreturn_t handled = IRQ_NONE;
- dev_dbg(musb->controller, "<== Power=%02x, DevCtl=%02x, int_usb=0x%x\n", power, devctl,
+ dev_dbg(musb->controller, "<== DevCtl=%02x, int_usb=0x%x\n", devctl,
int_usb);
/* in host mode, the peripheral may issue remote wakeup.
@@ -485,6 +455,7 @@
if (devctl & MUSB_DEVCTL_HM) {
void __iomem *mbase = musb->mregs;
+ u8 power;
switch (musb->xceiv->state) {
case OTG_STATE_A_SUSPEND:
@@ -492,6 +463,7 @@
* will stop RESUME signaling
*/
+ power = musb_readb(musb->mregs, MUSB_POWER);
if (power & MUSB_POWER_SUSPENDM) {
/* spurious */
musb->int_usb &= ~MUSB_INTR_SUSPEND;
@@ -655,8 +627,8 @@
}
if (int_usb & MUSB_INTR_SUSPEND) {
- dev_dbg(musb->controller, "SUSPEND (%s) devctl %02x power %02x\n",
- otg_state_string(musb->xceiv->state), devctl, power);
+ dev_dbg(musb->controller, "SUSPEND (%s) devctl %02x\n",
+ otg_state_string(musb->xceiv->state), devctl);
handled = IRQ_HANDLED;
switch (musb->xceiv->state) {
@@ -722,8 +694,10 @@
if (is_peripheral_active(musb)) {
/* REVISIT HNP; just force disconnect */
}
- musb_writew(musb->mregs, MUSB_INTRTXE, musb->epmask);
- musb_writew(musb->mregs, MUSB_INTRRXE, musb->epmask & 0xfffe);
+ musb->intrtxe = musb->epmask;
+ musb_writew(musb->mregs, MUSB_INTRTXE, musb->intrtxe);
+ musb->intrrxe = musb->epmask & 0xfffe;
+ musb_writew(musb->mregs, MUSB_INTRRXE, musb->intrrxe);
musb_writeb(musb->mregs, MUSB_INTRUSBE, 0xf7);
musb->port1_status &= ~(USB_PORT_STAT_LOW_SPEED
|USB_PORT_STAT_HIGH_SPEED
@@ -944,8 +918,10 @@
dev_dbg(musb->controller, "<== devctl %02x\n", devctl);
/* Set INT enable registers, enable interrupts */
- musb_writew(regs, MUSB_INTRTXE, musb->epmask);
- musb_writew(regs, MUSB_INTRRXE, musb->epmask & 0xfffe);
+ musb->intrtxe = musb->epmask;
+ musb_writew(regs, MUSB_INTRTXE, musb->intrtxe);
+ musb->intrrxe = musb->epmask & 0xfffe;
+ musb_writew(regs, MUSB_INTRRXE, musb->intrrxe);
musb_writeb(regs, MUSB_INTRUSBE, 0xf7);
musb_writeb(regs, MUSB_TESTMODE, 0);
@@ -983,7 +959,9 @@
/* disable interrupts */
musb_writeb(mbase, MUSB_INTRUSBE, 0);
+ musb->intrtxe = 0;
musb_writew(mbase, MUSB_INTRTXE, 0);
+ musb->intrrxe = 0;
musb_writew(mbase, MUSB_INTRRXE, 0);
/* off */
@@ -1062,12 +1040,12 @@
|| defined(CONFIG_USB_MUSB_AM35X_MODULE) \
|| defined(CONFIG_USB_MUSB_DSPS) \
|| defined(CONFIG_USB_MUSB_DSPS_MODULE)
-static ushort __devinitdata fifo_mode = 4;
+static ushort fifo_mode = 4;
#elif defined(CONFIG_USB_MUSB_UX500) \
|| defined(CONFIG_USB_MUSB_UX500_MODULE)
-static ushort __devinitdata fifo_mode = 5;
+static ushort fifo_mode = 5;
#else
-static ushort __devinitdata fifo_mode = 2;
+static ushort fifo_mode = 2;
#endif
/* "modprobe ... fifo_mode=1" etc */
@@ -1080,7 +1058,7 @@
*/
/* mode 0 - fits in 2KB */
-static struct musb_fifo_cfg __devinitdata mode_0_cfg[] = {
+static struct musb_fifo_cfg mode_0_cfg[] = {
{ .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, },
{ .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, },
{ .hw_ep_num = 2, .style = FIFO_RXTX, .maxpacket = 512, },
@@ -1089,7 +1067,7 @@
};
/* mode 1 - fits in 4KB */
-static struct musb_fifo_cfg __devinitdata mode_1_cfg[] = {
+static struct musb_fifo_cfg mode_1_cfg[] = {
{ .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, .mode = BUF_DOUBLE, },
{ .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, .mode = BUF_DOUBLE, },
{ .hw_ep_num = 2, .style = FIFO_RXTX, .maxpacket = 512, .mode = BUF_DOUBLE, },
@@ -1098,7 +1076,7 @@
};
/* mode 2 - fits in 4KB */
-static struct musb_fifo_cfg __devinitdata mode_2_cfg[] = {
+static struct musb_fifo_cfg mode_2_cfg[] = {
{ .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, },
{ .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, },
{ .hw_ep_num = 2, .style = FIFO_TX, .maxpacket = 512, },
@@ -1108,7 +1086,7 @@
};
/* mode 3 - fits in 4KB */
-static struct musb_fifo_cfg __devinitdata mode_3_cfg[] = {
+static struct musb_fifo_cfg mode_3_cfg[] = {
{ .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, .mode = BUF_DOUBLE, },
{ .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, .mode = BUF_DOUBLE, },
{ .hw_ep_num = 2, .style = FIFO_TX, .maxpacket = 512, },
@@ -1118,7 +1096,7 @@
};
/* mode 4 - fits in 16KB */
-static struct musb_fifo_cfg __devinitdata mode_4_cfg[] = {
+static struct musb_fifo_cfg mode_4_cfg[] = {
{ .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, },
{ .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, },
{ .hw_ep_num = 2, .style = FIFO_TX, .maxpacket = 512, },
@@ -1149,7 +1127,7 @@
};
/* mode 5 - fits in 8KB */
-static struct musb_fifo_cfg __devinitdata mode_5_cfg[] = {
+static struct musb_fifo_cfg mode_5_cfg[] = {
{ .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, },
{ .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, },
{ .hw_ep_num = 2, .style = FIFO_TX, .maxpacket = 512, },
@@ -1185,7 +1163,7 @@
*
* returns negative errno or offset for next fifo.
*/
-static int __devinit
+static int
fifo_setup(struct musb *musb, struct musb_hw_ep *hw_ep,
const struct musb_fifo_cfg *cfg, u16 offset)
{
@@ -1256,11 +1234,11 @@
return offset + (maxpacket << ((c_size & MUSB_FIFOSZ_DPB) ? 1 : 0));
}
-static struct musb_fifo_cfg __devinitdata ep0_cfg = {
+static struct musb_fifo_cfg ep0_cfg = {
.style = FIFO_RXTX, .maxpacket = 64,
};
-static int __devinit ep_config_from_table(struct musb *musb)
+static int ep_config_from_table(struct musb *musb)
{
const struct musb_fifo_cfg *cfg;
unsigned i, n;
@@ -1351,7 +1329,7 @@
* ep_config_from_hw - when MUSB_C_DYNFIFO_DEF is false
* @param musb the controller
*/
-static int __devinit ep_config_from_hw(struct musb *musb)
+static int ep_config_from_hw(struct musb *musb)
{
u8 epnum = 0;
struct musb_hw_ep *hw_ep;
@@ -1398,7 +1376,7 @@
/* Initialize MUSB (M)HDRC part of the USB hardware subsystem;
* configure endpoints, or take their config from silicon
*/
-static int __devinit musb_core_init(u16 musb_type, struct musb *musb)
+static int musb_core_init(u16 musb_type, struct musb *musb)
{
u8 reg;
char *type;
@@ -1523,33 +1501,6 @@
/*-------------------------------------------------------------------------*/
-#if defined(CONFIG_SOC_OMAP2430) || defined(CONFIG_SOC_OMAP3430) || \
- defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_ARCH_U8500)
-
-static irqreturn_t generic_interrupt(int irq, void *__hci)
-{
- unsigned long flags;
- irqreturn_t retval = IRQ_NONE;
- struct musb *musb = __hci;
-
- spin_lock_irqsave(&musb->lock, flags);
-
- musb->int_usb = musb_readb(musb->mregs, MUSB_INTRUSB);
- musb->int_tx = musb_readw(musb->mregs, MUSB_INTRTX);
- musb->int_rx = musb_readw(musb->mregs, MUSB_INTRRX);
-
- if (musb->int_usb || musb->int_tx || musb->int_rx)
- retval = musb_interrupt(musb);
-
- spin_unlock_irqrestore(&musb->lock, flags);
-
- return retval;
-}
-
-#else
-#define generic_interrupt NULL
-#endif
-
/*
* handle all the irqs defined by the HDRC core. for now we expect: other
* irq sources (phy, dma, etc) will be handled first, musb->int_* values
@@ -1560,12 +1511,11 @@
irqreturn_t musb_interrupt(struct musb *musb)
{
irqreturn_t retval = IRQ_NONE;
- u8 devctl, power;
+ u8 devctl;
int ep_num;
u32 reg;
devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
- power = musb_readb(musb->mregs, MUSB_POWER);
dev_dbg(musb->controller, "** IRQ %s usb%04x tx%04x rx%04x\n",
(devctl & MUSB_DEVCTL_HM) ? "host" : "peripheral",
@@ -1576,7 +1526,7 @@
*/
if (musb->int_usb)
retval |= musb_stage0_irq(musb, musb->int_usb,
- devctl, power);
+ devctl);
/* "stage 1" is handling endpoint irqs */
@@ -1628,7 +1578,7 @@
EXPORT_SYMBOL_GPL(musb_interrupt);
#ifndef CONFIG_MUSB_PIO_ONLY
-static bool __devinitdata use_dma = 1;
+static bool use_dma = 1;
/* "modprobe ... use_dma=0" etc */
module_param(use_dma, bool, 0);
@@ -1809,8 +1759,7 @@
* Init support
*/
-static struct musb *__devinit
-allocate_instance(struct device *dev,
+static struct musb *allocate_instance(struct device *dev,
struct musb_hdrc_config *config, void __iomem *mbase)
{
struct musb *musb;
@@ -1885,7 +1834,7 @@
* @ctrl: virtual address of controller registers,
* not yet corrected for platform-specific offsets
*/
-static int __devinit
+static int
musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
{
int status;
@@ -1919,7 +1868,8 @@
musb->ops = plat->platform_ops;
/* The musb_platform_init() call:
- * - adjusts musb->mregs and musb->isr if needed,
+ * - adjusts musb->mregs
+ * - sets the musb->isr
* - may initialize an integrated tranceiver
* - initializes musb->xceiv, usually by otg_get_phy()
* - stops powering VBUS
@@ -1929,7 +1879,6 @@
* external/discrete ones in various flavors (twl4030 family,
* isp1504, non-OTG, etc) mostly hooking up through ULPI.
*/
- musb->isr = generic_interrupt;
status = musb_platform_init(musb);
if (status < 0)
goto fail1;
@@ -2060,7 +2009,7 @@
/* all implementations (PCI bridge to FPGA, VLYNQ, etc) should just
* bridge to a platform device; this driver then suffices.
*/
-static int __devinit musb_probe(struct platform_device *pdev)
+static int musb_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
int irq = platform_get_irq_byname(pdev, "mc");
@@ -2085,7 +2034,7 @@
return status;
}
-static int __devexit musb_remove(struct platform_device *pdev)
+static int musb_remove(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct musb *musb = dev_to_musb(dev);
@@ -2120,8 +2069,6 @@
musb->context.testmode = musb_readb(musb_base, MUSB_TESTMODE);
musb->context.busctl = musb_read_ulpi_buscontrol(musb->mregs);
musb->context.power = musb_readb(musb_base, MUSB_POWER);
- musb->context.intrtxe = musb_readw(musb_base, MUSB_INTRTXE);
- musb->context.intrrxe = musb_readw(musb_base, MUSB_INTRRXE);
musb->context.intrusbe = musb_readb(musb_base, MUSB_INTRUSBE);
musb->context.index = musb_readb(musb_base, MUSB_INDEX);
musb->context.devctl = musb_readb(musb_base, MUSB_DEVCTL);
@@ -2194,8 +2141,8 @@
musb_writeb(musb_base, MUSB_TESTMODE, musb->context.testmode);
musb_write_ulpi_buscontrol(musb->mregs, musb->context.busctl);
musb_writeb(musb_base, MUSB_POWER, musb->context.power);
- musb_writew(musb_base, MUSB_INTRTXE, musb->context.intrtxe);
- musb_writew(musb_base, MUSB_INTRRXE, musb->context.intrrxe);
+ musb_writew(musb_base, MUSB_INTRTXE, musb->intrtxe);
+ musb_writew(musb_base, MUSB_INTRRXE, musb->intrrxe);
musb_writeb(musb_base, MUSB_INTRUSBE, musb->context.intrusbe);
musb_writeb(musb_base, MUSB_DEVCTL, musb->context.devctl);
@@ -2340,7 +2287,7 @@
.pm = MUSB_DEV_PM_OPS,
},
.probe = musb_probe,
- .remove = __devexit_p(musb_remove),
+ .remove = musb_remove,
.shutdown = musb_shutdown,
};
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index c158aac..7fb4819 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -288,7 +288,6 @@
struct musb_context_registers {
u8 power;
- u16 intrtxe, intrrxe;
u8 intrusbe;
u16 frame;
u8 index, testmode;
@@ -313,6 +312,8 @@
struct work_struct irq_work;
u16 hwvers;
+ u16 intrrxe;
+ u16 intrtxe;
/* this hub status bit is reserved by USB 2.0 and not seen by usbcore */
#define MUSB_PORT_STAT_RESUME (1 << 31)
@@ -521,8 +522,6 @@
extern void musb_start(struct musb *musb);
extern void musb_stop(struct musb *musb);
-extern int musb_get_id(struct device *dev, gfp_t gfp_mask);
-extern void musb_put_id(struct device *dev, int id);
extern void musb_write_fifo(struct musb_hw_ep *ep, u16 len, const u8 *src);
extern void musb_read_fifo(struct musb_hw_ep *ep, u16 len, u8 *dst);
diff --git a/drivers/usb/musb/musb_debugfs.c b/drivers/usb/musb/musb_debugfs.c
index 1d6e8af..4c21679 100644
--- a/drivers/usb/musb/musb_debugfs.c
+++ b/drivers/usb/musb/musb_debugfs.c
@@ -233,7 +233,7 @@
.release = single_release,
};
-int __devinit musb_init_debugfs(struct musb *musb)
+int musb_init_debugfs(struct musb *musb)
{
struct dentry *root;
struct dentry *file;
diff --git a/drivers/usb/musb/musb_dma.h b/drivers/usb/musb/musb_dma.h
index 24d3921..1b6b827 100644
--- a/drivers/usb/musb/musb_dma.h
+++ b/drivers/usb/musb/musb_dma.h
@@ -178,8 +178,7 @@
extern void musb_dma_completion(struct musb *musb, u8 epnum, u8 transmit);
-extern struct dma_controller *__devinit
-dma_controller_create(struct musb *, void __iomem *);
+extern struct dma_controller *dma_controller_create(struct musb *, void __iomem *);
extern void dma_controller_destroy(struct dma_controller *);
diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c
index ff5f112..9a975aa 100644
--- a/drivers/usb/musb/musb_dsps.c
+++ b/drivers/usb/musb/musb_dsps.c
@@ -124,8 +124,44 @@
const struct dsps_musb_wrapper *wrp; /* wrapper register offsets */
struct timer_list timer[2]; /* otg_workaround timer */
unsigned long last_timer[2]; /* last timer data for each instance */
+ u32 __iomem *usb_ctrl[2];
};
+#define DSPS_AM33XX_CONTROL_MODULE_PHYS_0 0x44e10620
+#define DSPS_AM33XX_CONTROL_MODULE_PHYS_1 0x44e10628
+
+static const resource_size_t dsps_control_module_phys[] = {
+ DSPS_AM33XX_CONTROL_MODULE_PHYS_0,
+ DSPS_AM33XX_CONTROL_MODULE_PHYS_1,
+};
+
+/**
+ * musb_dsps_phy_control - phy on/off
+ * @glue: struct dsps_glue *
+ * @id: musb instance
+ * @on: flag for phy to be switched on or off
+ *
+ * This is to enable the PHY using usb_ctrl register in system control
+ * module space.
+ *
+ * XXX: This function will be removed once we have a seperate driver for
+ * control module
+ */
+static void musb_dsps_phy_control(struct dsps_glue *glue, u8 id, u8 on)
+{
+ u32 usbphycfg;
+
+ usbphycfg = readl(glue->usb_ctrl[id]);
+
+ if (on) {
+ usbphycfg &= ~(USBPHY_CM_PWRDN | USBPHY_OTG_PWRDN);
+ usbphycfg |= USBPHY_OTGVDET_EN | USBPHY_OTGSESSEND_EN;
+ } else {
+ usbphycfg |= USBPHY_CM_PWRDN | USBPHY_OTG_PWRDN;
+ }
+
+ writel(usbphycfg, glue->usb_ctrl[id]);
+}
/**
* dsps_musb_enable - enable interrupts
*/
@@ -296,7 +332,7 @@
* Also, DRVVBUS pulses for SRP (but not at 5V) ...
*/
if (usbintr & MUSB_INTR_BABBLE)
- pr_info("CAUTION: musb: Babble Interrupt Occured\n");
+ pr_info("CAUTION: musb: Babble Interrupt Occurred\n");
if (usbintr & ((1 << wrp->drvvbus) << wrp->usb_shift)) {
int drvvbus = dsps_readl(reg_base, wrp->status);
@@ -365,11 +401,9 @@
static int dsps_musb_init(struct musb *musb)
{
struct device *dev = musb->controller;
- struct musb_hdrc_platform_data *plat = dev->platform_data;
struct platform_device *pdev = to_platform_device(dev);
struct dsps_glue *glue = dev_get_drvdata(dev->parent);
const struct dsps_musb_wrapper *wrp = glue->wrp;
- struct omap_musb_board_data *data = plat->board_data;
void __iomem *reg_base = musb->ctrl_base;
u32 rev, val;
int status;
@@ -377,7 +411,8 @@
/* mentor core register starts at offset of 0x400 from musb base */
musb->mregs += wrp->musb_core_offset;
- /* Get the NOP PHY */
+ /* NOP driver needs change if supporting dual instance */
+ usb_nop_xceiv_register();
musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2);
if (IS_ERR_OR_NULL(musb->xceiv))
return -ENODEV;
@@ -395,8 +430,7 @@
dsps_writel(reg_base, wrp->control, (1 << wrp->reset));
/* Start the on-chip PHY and its PLL. */
- if (data->set_phy_power)
- data->set_phy_power(1);
+ musb_dsps_phy_control(glue, pdev->id, 1);
musb->isr = dsps_interrupt;
@@ -418,16 +452,13 @@
static int dsps_musb_exit(struct musb *musb)
{
struct device *dev = musb->controller;
- struct musb_hdrc_platform_data *plat = dev->platform_data;
- struct omap_musb_board_data *data = plat->board_data;
struct platform_device *pdev = to_platform_device(dev);
struct dsps_glue *glue = dev_get_drvdata(dev->parent);
del_timer_sync(&glue->timer[pdev->id]);
/* Shutdown the on-chip PHY and its PLL. */
- if (data->set_phy_power)
- data->set_phy_power(0);
+ musb_dsps_phy_control(glue, pdev->id, 0);
/* NOP driver needs change if supporting dual instance */
usb_put_phy(musb->xceiv);
@@ -448,7 +479,7 @@
static u64 musb_dmamask = DMA_BIT_MASK(32);
-static int __devinit dsps_create_musb_pdev(struct dsps_glue *glue, u8 id)
+static int dsps_create_musb_pdev(struct dsps_glue *glue, u8 id)
{
struct device *dev = glue->dev;
struct platform_device *pdev = to_platform_device(dev);
@@ -459,24 +490,33 @@
struct resource *res;
struct resource resources[2];
char res_name[11];
- int ret, musbid;
+ int ret;
- /* get memory resource */
- snprintf(res_name, sizeof(res_name), "musb%d", id);
- res = platform_get_resource_byname(pdev, IORESOURCE_MEM, res_name);
+ resources[0].start = dsps_control_module_phys[id];
+ resources[0].end = resources[0].start + SZ_4 - 1;
+ resources[0].flags = IORESOURCE_MEM;
+
+ glue->usb_ctrl[id] = devm_request_and_ioremap(&pdev->dev, resources);
+ if (glue->usb_ctrl[id] == NULL) {
+ dev_err(dev, "Failed to obtain usb_ctrl%d memory\n", id);
+ ret = -ENODEV;
+ goto err0;
+ }
+
+ /* first resource is for usbss, so start index from 1 */
+ res = platform_get_resource(pdev, IORESOURCE_MEM, id + 1);
if (!res) {
- dev_err(dev, "%s get mem resource failed\n", res_name);
+ dev_err(dev, "failed to get memory for instance %d\n", id);
ret = -ENODEV;
goto err0;
}
res->parent = NULL;
resources[0] = *res;
- /* get irq resource */
- snprintf(res_name, sizeof(res_name), "musb%d-irq", id);
- res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, res_name);
+ /* first resource is for usbss, so start index from 1 */
+ res = platform_get_resource(pdev, IORESOURCE_IRQ, id + 1);
if (!res) {
- dev_err(dev, "%s get irq resource failed\n", res_name);
+ dev_err(dev, "failed to get irq for instance %d\n", id);
ret = -ENODEV;
goto err0;
}
@@ -484,22 +524,14 @@
resources[1] = *res;
resources[1].name = "mc";
- /* get the musb id */
- musbid = musb_get_id(dev, GFP_KERNEL);
- if (musbid < 0) {
- dev_err(dev, "failed to allocate musb id\n");
- ret = -ENOMEM;
- goto err0;
- }
/* allocate the child platform device */
- musb = platform_device_alloc("musb-hdrc", musbid);
+ musb = platform_device_alloc("musb-hdrc", PLATFORM_DEVID_AUTO);
if (!musb) {
dev_err(dev, "failed to allocate musb device\n");
ret = -ENOMEM;
- goto err1;
+ goto err0;
}
- musb->id = musbid;
musb->dev.parent = dev;
musb->dev.dma_mask = &musb_dmamask;
musb->dev.coherent_dma_mask = musb_dmamask;
@@ -556,20 +588,11 @@
err2:
platform_device_put(musb);
-err1:
- musb_put_id(dev, musbid);
err0:
return ret;
}
-static void dsps_delete_musb_pdev(struct dsps_glue *glue, u8 id)
-{
- musb_put_id(glue->dev, glue->musb[id]->id);
- platform_device_del(glue->musb[id]);
- platform_device_put(glue->musb[id]);
-}
-
-static int __devinit dsps_probe(struct platform_device *pdev)
+static int dsps_probe(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
const struct of_device_id *match;
@@ -628,7 +651,7 @@
dev_err(&pdev->dev, "failed to create child pdev\n");
/* release resources of previously created instances */
for (i--; i >= 0 ; i--)
- dsps_delete_musb_pdev(glue, i);
+ platform_device_unregister(glue->musb[i]);
goto err3;
}
}
@@ -645,7 +668,7 @@
err0:
return ret;
}
-static int __devexit dsps_remove(struct platform_device *pdev)
+static int dsps_remove(struct platform_device *pdev)
{
struct dsps_glue *glue = platform_get_drvdata(pdev);
const struct dsps_musb_wrapper *wrp = glue->wrp;
@@ -653,7 +676,7 @@
/* delete the child platform device */
for (i = 0; i < wrp->instances ; i++)
- dsps_delete_musb_pdev(glue, i);
+ platform_device_unregister(glue->musb[i]);
/* disable usbss clocks */
pm_runtime_put(&pdev->dev);
@@ -666,24 +689,26 @@
#ifdef CONFIG_PM_SLEEP
static int dsps_suspend(struct device *dev)
{
- struct musb_hdrc_platform_data *plat = dev->platform_data;
- struct omap_musb_board_data *data = plat->board_data;
+ struct platform_device *pdev = to_platform_device(dev->parent);
+ struct dsps_glue *glue = platform_get_drvdata(pdev);
+ const struct dsps_musb_wrapper *wrp = glue->wrp;
+ int i;
- /* Shutdown the on-chip PHY and its PLL. */
- if (data->set_phy_power)
- data->set_phy_power(0);
+ for (i = 0; i < wrp->instances; i++)
+ musb_dsps_phy_control(glue, i, 0);
return 0;
}
static int dsps_resume(struct device *dev)
{
- struct musb_hdrc_platform_data *plat = dev->platform_data;
- struct omap_musb_board_data *data = plat->board_data;
+ struct platform_device *pdev = to_platform_device(dev->parent);
+ struct dsps_glue *glue = platform_get_drvdata(pdev);
+ const struct dsps_musb_wrapper *wrp = glue->wrp;
+ int i;
- /* Start the on-chip PHY and its PLL. */
- if (data->set_phy_power)
- data->set_phy_power(1);
+ for (i = 0; i < wrp->instances; i++)
+ musb_dsps_phy_control(glue, i, 1);
return 0;
}
@@ -691,7 +716,7 @@
static SIMPLE_DEV_PM_OPS(dsps_pm_ops, dsps_suspend, dsps_resume);
-static const struct dsps_musb_wrapper ti81xx_driver_data __devinitconst = {
+static const struct dsps_musb_wrapper ti81xx_driver_data = {
.revision = 0x00,
.control = 0x14,
.status = 0x18,
@@ -719,10 +744,10 @@
.rxep_bitmap = (0xfffe << 16),
.musb_core_offset = 0x400,
.poll_seconds = 2,
- .instances = 2,
+ .instances = 1,
};
-static const struct platform_device_id musb_dsps_id_table[] __devinitconst = {
+static const struct platform_device_id musb_dsps_id_table[] = {
{
.name = "musb-ti81xx",
.driver_data = (kernel_ulong_t) &ti81xx_driver_data,
@@ -732,7 +757,7 @@
MODULE_DEVICE_TABLE(platform, musb_dsps_id_table);
#ifdef CONFIG_OF
-static const struct of_device_id musb_dsps_of_match[] __devinitconst = {
+static const struct of_device_id musb_dsps_of_match[] = {
{ .compatible = "ti,musb-am33xx",
.data = (void *) &ti81xx_driver_data, },
{ },
@@ -742,7 +767,7 @@
static struct platform_driver dsps_usbss_driver = {
.probe = dsps_probe,
- .remove = __devexit_p(dsps_remove),
+ .remove = dsps_remove,
.driver = {
.name = "musb-dsps",
.pm = &dsps_pm_ops,
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index b6b84da..8767874 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -1090,7 +1090,6 @@
*/
musb_ep_select(mbase, epnum);
if (usb_endpoint_dir_in(desc)) {
- u16 int_txe = musb_readw(mbase, MUSB_INTRTXE);
if (hw_ep->is_shared_fifo)
musb_ep->is_in = 1;
@@ -1102,8 +1101,8 @@
goto fail;
}
- int_txe |= (1 << epnum);
- musb_writew(mbase, MUSB_INTRTXE, int_txe);
+ musb->intrtxe |= (1 << epnum);
+ musb_writew(mbase, MUSB_INTRTXE, musb->intrtxe);
/* REVISIT if can_bulk_split(), use by updating "tmp";
* likewise high bandwidth periodic tx
@@ -1130,7 +1129,6 @@
musb_writew(regs, MUSB_TXCSR, csr);
} else {
- u16 int_rxe = musb_readw(mbase, MUSB_INTRRXE);
if (hw_ep->is_shared_fifo)
musb_ep->is_in = 0;
@@ -1142,8 +1140,8 @@
goto fail;
}
- int_rxe |= (1 << epnum);
- musb_writew(mbase, MUSB_INTRRXE, int_rxe);
+ musb->intrrxe |= (1 << epnum);
+ musb_writew(mbase, MUSB_INTRRXE, musb->intrrxe);
/* REVISIT if can_bulk_combine() use by updating "tmp"
* likewise high bandwidth periodic rx
@@ -1231,14 +1229,12 @@
/* zero the endpoint sizes */
if (musb_ep->is_in) {
- u16 int_txe = musb_readw(musb->mregs, MUSB_INTRTXE);
- int_txe &= ~(1 << epnum);
- musb_writew(musb->mregs, MUSB_INTRTXE, int_txe);
+ musb->intrtxe &= ~(1 << epnum);
+ musb_writew(musb->mregs, MUSB_INTRTXE, musb->intrtxe);
musb_writew(epio, MUSB_TXMAXP, 0);
} else {
- u16 int_rxe = musb_readw(musb->mregs, MUSB_INTRRXE);
- int_rxe &= ~(1 << epnum);
- musb_writew(musb->mregs, MUSB_INTRRXE, int_rxe);
+ musb->intrrxe &= ~(1 << epnum);
+ musb_writew(musb->mregs, MUSB_INTRRXE, musb->intrrxe);
musb_writew(epio, MUSB_RXMAXP, 0);
}
@@ -1554,7 +1550,7 @@
void __iomem *epio = musb->endpoints[epnum].regs;
void __iomem *mbase;
unsigned long flags;
- u16 csr, int_txe;
+ u16 csr;
mbase = musb->mregs;
@@ -1562,8 +1558,7 @@
musb_ep_select(mbase, (u8) epnum);
/* disable interrupts */
- int_txe = musb_readw(mbase, MUSB_INTRTXE);
- musb_writew(mbase, MUSB_INTRTXE, int_txe & ~(1 << epnum));
+ musb_writew(mbase, MUSB_INTRTXE, musb->intrtxe & ~(1 << epnum));
if (musb_ep->is_in) {
csr = musb_readw(epio, MUSB_TXCSR);
@@ -1587,7 +1582,7 @@
}
/* re-enable interrupt */
- musb_writew(mbase, MUSB_INTRTXE, int_txe);
+ musb_writew(mbase, MUSB_INTRTXE, musb->intrtxe);
spin_unlock_irqrestore(&musb->lock, flags);
}
@@ -1792,7 +1787,7 @@
}
-static void __devinit
+static void
init_peripheral_ep(struct musb *musb, struct musb_ep *ep, u8 epnum, int is_in)
{
struct musb_hw_ep *hw_ep = musb->endpoints + epnum;
@@ -1829,7 +1824,7 @@
* Initialize the endpoints exposed to peripheral drivers, with backlinks
* to the rest of the driver state.
*/
-static inline void __devinit musb_g_init_endpoints(struct musb *musb)
+static inline void musb_g_init_endpoints(struct musb *musb)
{
u8 epnum;
struct musb_hw_ep *hw_ep;
@@ -1862,7 +1857,7 @@
/* called once during driver setup to initialize and link into
* the driver model; memory is zeroed.
*/
-int __devinit musb_gadget_setup(struct musb *musb)
+int musb_gadget_setup(struct musb *musb)
{
int status;
@@ -2176,10 +2171,9 @@
u8 devctl = musb_readb(mbase, MUSB_DEVCTL);
u8 power;
- dev_dbg(musb->controller, "<== %s addr=%x driver '%s'\n",
+ dev_dbg(musb->controller, "<== %s driver '%s'\n",
(devctl & MUSB_DEVCTL_BDEVICE)
? "B-Device" : "A-Device",
- musb_readb(mbase, MUSB_FADDR),
musb->gadget_driver
? musb->gadget_driver->driver.name
: NULL
diff --git a/drivers/usb/musb/musb_gadget_ep0.c b/drivers/usb/musb/musb_gadget_ep0.c
index e40d764..c9c1ac4 100644
--- a/drivers/usb/musb/musb_gadget_ep0.c
+++ b/drivers/usb/musb/musb_gadget_ep0.c
@@ -673,10 +673,8 @@
csr = musb_readw(regs, MUSB_CSR0);
len = musb_readb(regs, MUSB_COUNT0);
- dev_dbg(musb->controller, "csr %04x, count %d, myaddr %d, ep0stage %s\n",
- csr, len,
- musb_readb(mbase, MUSB_FADDR),
- decode_ep0stage(musb->ep0_state));
+ dev_dbg(musb->controller, "csr %04x, count %d, ep0stage %s\n",
+ csr, len, decode_ep0stage(musb->ep0_state));
if (csr & MUSB_CSR0_P_DATAEND) {
/*
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index 3df6a76..e9f0fd9 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -740,7 +740,7 @@
csr = musb_readw(epio, MUSB_TXCSR);
/* disable interrupt in case we flush */
- int_txe = musb_readw(mbase, MUSB_INTRTXE);
+ int_txe = musb->intrtxe;
musb_writew(mbase, MUSB_INTRTXE, int_txe & ~(1 << epnum));
/* general endpoint setup */
diff --git a/drivers/usb/musb/musbhsdma.c b/drivers/usb/musb/musbhsdma.c
index 0fc6ca6..3d1fd52 100644
--- a/drivers/usb/musb/musbhsdma.c
+++ b/drivers/usb/musb/musbhsdma.c
@@ -380,8 +380,7 @@
kfree(controller);
}
-struct dma_controller *__devinit
-dma_controller_create(struct musb *musb, void __iomem *base)
+struct dma_controller *dma_controller_create(struct musb *musb, void __iomem *base)
{
struct musb_dma_controller *controller;
struct device *dev = musb->controller;
diff --git a/drivers/usb/musb/musbhsdma.h b/drivers/usb/musb/musbhsdma.h
index 320fd4a..f7b13fd2 100644
--- a/drivers/usb/musb/musbhsdma.h
+++ b/drivers/usb/musb/musbhsdma.h
@@ -31,10 +31,6 @@
*
*/
-#if defined(CONFIG_SOC_OMAP2430) || defined(CONFIG_SOC_OMAP3430)
-#include "omap2430.h"
-#endif
-
#ifndef CONFIG_BLACKFIN
#define MUSB_HSDMA_BASE 0x200
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index a538fe1..da00af4 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -333,6 +333,26 @@
omap_musb_set_mailbox(glue);
}
+static irqreturn_t omap2430_musb_interrupt(int irq, void *__hci)
+{
+ unsigned long flags;
+ irqreturn_t retval = IRQ_NONE;
+ struct musb *musb = __hci;
+
+ spin_lock_irqsave(&musb->lock, flags);
+
+ musb->int_usb = musb_readb(musb->mregs, MUSB_INTRUSB);
+ musb->int_tx = musb_readw(musb->mregs, MUSB_INTRTX);
+ musb->int_rx = musb_readw(musb->mregs, MUSB_INTRRX);
+
+ if (musb->int_usb || musb->int_tx || musb->int_rx)
+ retval = musb_interrupt(musb);
+
+ spin_unlock_irqrestore(&musb->lock, flags);
+
+ return retval;
+}
+
static int omap2430_musb_init(struct musb *musb)
{
u32 l;
@@ -352,6 +372,8 @@
return -ENODEV;
}
+ musb->isr = omap2430_musb_interrupt;
+
status = pm_runtime_get_sync(dev);
if (status < 0) {
dev_err(dev, "pm_runtime_get_sync FAILED %d\n", status);
@@ -468,7 +490,7 @@
static u64 omap2430_dmamask = DMA_BIT_MASK(32);
-static int __devinit omap2430_probe(struct platform_device *pdev)
+static int omap2430_probe(struct platform_device *pdev)
{
struct musb_hdrc_platform_data *pdata = pdev->dev.platform_data;
struct omap_musb_board_data *data;
@@ -478,7 +500,6 @@
struct musb_hdrc_config *config;
struct resource *res;
int ret = -ENOMEM;
- int musbid;
glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL);
if (!glue) {
@@ -486,21 +507,12 @@
goto err0;
}
- /* get the musb id */
- musbid = musb_get_id(&pdev->dev, GFP_KERNEL);
- if (musbid < 0) {
- dev_err(&pdev->dev, "failed to allocate musb id\n");
- ret = -ENOMEM;
+ musb = platform_device_alloc("musb-hdrc", PLATFORM_DEVID_AUTO);
+ if (!musb) {
+ dev_err(&pdev->dev, "failed to allocate musb device\n");
goto err0;
}
- musb = platform_device_alloc("musb-hdrc", musbid);
- if (!musb) {
- dev_err(&pdev->dev, "failed to allocate musb device\n");
- goto err1;
- }
-
- musb->id = musbid;
musb->dev.parent = &pdev->dev;
musb->dev.dma_mask = &omap2430_dmamask;
musb->dev.coherent_dma_mask = omap2430_dmamask;
@@ -521,7 +533,7 @@
dev_err(&pdev->dev,
"failed to allocate musb platfrom data\n");
ret = -ENOMEM;
- goto err1;
+ goto err2;
}
data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
@@ -529,14 +541,14 @@
dev_err(&pdev->dev,
"failed to allocate musb board data\n");
ret = -ENOMEM;
- goto err1;
+ goto err2;
}
config = devm_kzalloc(&pdev->dev, sizeof(*config), GFP_KERNEL);
if (!data) {
dev_err(&pdev->dev,
"failed to allocate musb hdrc config\n");
- goto err1;
+ goto err2;
}
of_property_read_u32(np, "mode", (u32 *)&pdata->mode);
@@ -589,19 +601,15 @@
err2:
platform_device_put(musb);
-err1:
- musb_put_id(&pdev->dev, musbid);
-
err0:
return ret;
}
-static int __devexit omap2430_remove(struct platform_device *pdev)
+static int omap2430_remove(struct platform_device *pdev)
{
struct omap2430_glue *glue = platform_get_drvdata(pdev);
cancel_work_sync(&glue->omap_musb_mailbox_work);
- musb_put_id(&pdev->dev, glue->musb->id);
platform_device_unregister(glue->musb);
return 0;
@@ -666,7 +674,7 @@
static struct platform_driver omap2430_driver = {
.probe = omap2430_probe,
- .remove = __devexit_p(omap2430_remove),
+ .remove = omap2430_remove,
.driver = {
.name = "musb-omap2430",
.pm = DEV_PM_OPS,
diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c
index dc4d75e..8bde6fc 100644
--- a/drivers/usb/musb/tusb6010.c
+++ b/drivers/usb/musb/tusb6010.c
@@ -1153,14 +1153,13 @@
static u64 tusb_dmamask = DMA_BIT_MASK(32);
-static int __devinit tusb_probe(struct platform_device *pdev)
+static int tusb_probe(struct platform_device *pdev)
{
struct musb_hdrc_platform_data *pdata = pdev->dev.platform_data;
struct platform_device *musb;
struct tusb6010_glue *glue;
int ret = -ENOMEM;
- int musbid;
glue = kzalloc(sizeof(*glue), GFP_KERNEL);
if (!glue) {
@@ -1168,21 +1167,12 @@
goto err0;
}
- /* get the musb id */
- musbid = musb_get_id(&pdev->dev, GFP_KERNEL);
- if (musbid < 0) {
- dev_err(&pdev->dev, "failed to allocate musb id\n");
- ret = -ENOMEM;
+ musb = platform_device_alloc("musb-hdrc", PLATFORM_DEVID_AUTO);
+ if (!musb) {
+ dev_err(&pdev->dev, "failed to allocate musb device\n");
goto err1;
}
- musb = platform_device_alloc("musb-hdrc", musbid);
- if (!musb) {
- dev_err(&pdev->dev, "failed to allocate musb device\n");
- goto err2;
- }
-
- musb->id = musbid;
musb->dev.parent = &pdev->dev;
musb->dev.dma_mask = &tusb_dmamask;
musb->dev.coherent_dma_mask = tusb_dmamask;
@@ -1218,9 +1208,6 @@
err3:
platform_device_put(musb);
-err2:
- musb_put_id(&pdev->dev, musbid);
-
err1:
kfree(glue);
@@ -1228,13 +1215,11 @@
return ret;
}
-static int __devexit tusb_remove(struct platform_device *pdev)
+static int tusb_remove(struct platform_device *pdev)
{
struct tusb6010_glue *glue = platform_get_drvdata(pdev);
- musb_put_id(&pdev->dev, glue->musb->id);
- platform_device_del(glue->musb);
- platform_device_put(glue->musb);
+ platform_device_unregister(glue->musb);
kfree(glue);
return 0;
@@ -1242,7 +1227,7 @@
static struct platform_driver tusb_driver = {
.probe = tusb_probe,
- .remove = __devexit_p(tusb_remove),
+ .remove = tusb_remove,
.driver = {
.name = "musb-tusb",
},
@@ -1251,15 +1236,4 @@
MODULE_DESCRIPTION("TUSB6010 MUSB Glue Layer");
MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");
MODULE_LICENSE("GPL v2");
-
-static int __init tusb_init(void)
-{
- return platform_driver_register(&tusb_driver);
-}
-module_init(tusb_init);
-
-static void __exit tusb_exit(void)
-{
- platform_driver_unregister(&tusb_driver);
-}
-module_exit(tusb_exit);
+module_platform_driver(tusb_driver);
diff --git a/drivers/usb/musb/tusb6010_omap.c b/drivers/usb/musb/tusb6010_omap.c
index 7a62b95..2c46d42 100644
--- a/drivers/usb/musb/tusb6010_omap.c
+++ b/drivers/usb/musb/tusb6010_omap.c
@@ -661,8 +661,7 @@
kfree(tusb_dma);
}
-struct dma_controller *__devinit
-dma_controller_create(struct musb *musb, void __iomem *base)
+struct dma_controller *dma_controller_create(struct musb *musb, void __iomem *base)
{
void __iomem *tbase = musb->ctrl_base;
struct tusb_omap_dma *tusb_dma;
diff --git a/drivers/usb/musb/ux500.c b/drivers/usb/musb/ux500.c
index 0e62f50..a27ca1a 100644
--- a/drivers/usb/musb/ux500.c
+++ b/drivers/usb/musb/ux500.c
@@ -36,6 +36,26 @@
};
#define glue_to_musb(g) platform_get_drvdata(g->musb)
+static irqreturn_t ux500_musb_interrupt(int irq, void *__hci)
+{
+ unsigned long flags;
+ irqreturn_t retval = IRQ_NONE;
+ struct musb *musb = __hci;
+
+ spin_lock_irqsave(&musb->lock, flags);
+
+ musb->int_usb = musb_readb(musb->mregs, MUSB_INTRUSB);
+ musb->int_tx = musb_readw(musb->mregs, MUSB_INTRTX);
+ musb->int_rx = musb_readw(musb->mregs, MUSB_INTRRX);
+
+ if (musb->int_usb || musb->int_tx || musb->int_rx)
+ retval = musb_interrupt(musb);
+
+ spin_unlock_irqrestore(&musb->lock, flags);
+
+ return retval;
+}
+
static int ux500_musb_init(struct musb *musb)
{
musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2);
@@ -44,6 +64,8 @@
return -ENODEV;
}
+ musb->isr = ux500_musb_interrupt;
+
return 0;
}
@@ -59,13 +81,12 @@
.exit = ux500_musb_exit,
};
-static int __devinit ux500_probe(struct platform_device *pdev)
+static int ux500_probe(struct platform_device *pdev)
{
struct musb_hdrc_platform_data *pdata = pdev->dev.platform_data;
struct platform_device *musb;
struct ux500_glue *glue;
struct clk *clk;
- int musbid;
int ret = -ENOMEM;
glue = kzalloc(sizeof(*glue), GFP_KERNEL);
@@ -74,18 +95,10 @@
goto err0;
}
- /* get the musb id */
- musbid = musb_get_id(&pdev->dev, GFP_KERNEL);
- if (musbid < 0) {
- dev_err(&pdev->dev, "failed to allocate musb id\n");
- ret = -ENOMEM;
- goto err1;
- }
-
- musb = platform_device_alloc("musb-hdrc", musbid);
+ musb = platform_device_alloc("musb-hdrc", PLATFORM_DEVID_AUTO);
if (!musb) {
dev_err(&pdev->dev, "failed to allocate musb device\n");
- goto err2;
+ goto err1;
}
clk = clk_get(&pdev->dev, "usb");
@@ -101,7 +114,6 @@
goto err4;
}
- musb->id = musbid;
musb->dev.parent = &pdev->dev;
musb->dev.dma_mask = pdev->dev.dma_mask;
musb->dev.coherent_dma_mask = pdev->dev.coherent_dma_mask;
@@ -144,9 +156,6 @@
err3:
platform_device_put(musb);
-err2:
- musb_put_id(&pdev->dev, musbid);
-
err1:
kfree(glue);
@@ -154,13 +163,11 @@
return ret;
}
-static int __devexit ux500_remove(struct platform_device *pdev)
+static int ux500_remove(struct platform_device *pdev)
{
struct ux500_glue *glue = platform_get_drvdata(pdev);
- musb_put_id(&pdev->dev, glue->musb->id);
- platform_device_del(glue->musb);
- platform_device_put(glue->musb);
+ platform_device_unregister(glue->musb);
clk_disable(glue->clk);
clk_put(glue->clk);
kfree(glue);
@@ -209,7 +216,7 @@
static struct platform_driver ux500_driver = {
.probe = ux500_probe,
- .remove = __devexit_p(ux500_remove),
+ .remove = ux500_remove,
.driver = {
.name = "musb-ux500",
.pm = DEV_PM_OPS,
@@ -219,15 +226,4 @@
MODULE_DESCRIPTION("UX500 MUSB Glue Layer");
MODULE_AUTHOR("Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>");
MODULE_LICENSE("GPL v2");
-
-static int __init ux500_init(void)
-{
- return platform_driver_register(&ux500_driver);
-}
-module_init(ux500_init);
-
-static void __exit ux500_exit(void)
-{
- platform_driver_unregister(&ux500_driver);
-}
-module_exit(ux500_exit);
+module_platform_driver(ux500_driver);
diff --git a/drivers/usb/musb/ux500_dma.c b/drivers/usb/musb/ux500_dma.c
index f1059e7..039e567 100644
--- a/drivers/usb/musb/ux500_dma.c
+++ b/drivers/usb/musb/ux500_dma.c
@@ -364,8 +364,7 @@
kfree(controller);
}
-struct dma_controller *__devinit
-dma_controller_create(struct musb *musb, void __iomem *base)
+struct dma_controller *dma_controller_create(struct musb *musb, void __iomem *base)
{
struct ux500_dma_controller *controller;
struct platform_device *pdev = to_platform_device(musb->controller);
diff --git a/drivers/usb/otg/ab8500-usb.c b/drivers/usb/otg/ab8500-usb.c
index ae8ad56..2d86f26 100644
--- a/drivers/usb/otg/ab8500-usb.c
+++ b/drivers/usb/otg/ab8500-usb.c
@@ -468,7 +468,7 @@
return 0;
}
-static int __devinit ab8500_usb_probe(struct platform_device *pdev)
+static int ab8500_usb_probe(struct platform_device *pdev)
{
struct ab8500_usb *ab;
struct usb_otg *otg;
@@ -546,7 +546,7 @@
return err;
}
-static int __devexit ab8500_usb_remove(struct platform_device *pdev)
+static int ab8500_usb_remove(struct platform_device *pdev)
{
struct ab8500_usb *ab = platform_get_drvdata(pdev);
@@ -571,7 +571,7 @@
static struct platform_driver ab8500_usb_driver = {
.probe = ab8500_usb_probe,
- .remove = __devexit_p(ab8500_usb_remove),
+ .remove = ab8500_usb_remove,
.driver = {
.name = "ab8500-usb",
.owner = THIS_MODULE,
diff --git a/drivers/usb/otg/fsl_otg.c b/drivers/usb/otg/fsl_otg.c
index c19d1d7..d16adb4 100644
--- a/drivers/usb/otg/fsl_otg.c
+++ b/drivers/usb/otg/fsl_otg.c
@@ -1110,7 +1110,7 @@
.release = fsl_otg_release,
};
-static int __devinit fsl_otg_probe(struct platform_device *pdev)
+static int fsl_otg_probe(struct platform_device *pdev)
{
int ret;
@@ -1144,7 +1144,7 @@
return ret;
}
-static int __devexit fsl_otg_remove(struct platform_device *pdev)
+static int fsl_otg_remove(struct platform_device *pdev)
{
struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data;
@@ -1169,7 +1169,7 @@
struct platform_driver fsl_otg_driver = {
.probe = fsl_otg_probe,
- .remove = __devexit_p(fsl_otg_remove),
+ .remove = fsl_otg_remove,
.driver = {
.name = driver_name,
.owner = THIS_MODULE,
diff --git a/drivers/usb/otg/isp1301_omap.c b/drivers/usb/otg/isp1301_omap.c
index ceee211..af9cb11 100644
--- a/drivers/usb/otg/isp1301_omap.c
+++ b/drivers/usb/otg/isp1301_omap.c
@@ -1493,7 +1493,7 @@
/*-------------------------------------------------------------------------*/
-static int __devinit
+static int
isp1301_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
{
int status;
diff --git a/drivers/usb/otg/msm_otg.c b/drivers/usb/otg/msm_otg.c
index 9f5fc90..3b9f0d9 100644
--- a/drivers/usb/otg/msm_otg.c
+++ b/drivers/usb/otg/msm_otg.c
@@ -1606,7 +1606,7 @@
return ret;
}
-static int __devexit msm_otg_remove(struct platform_device *pdev)
+static int msm_otg_remove(struct platform_device *pdev)
{
struct msm_otg *motg = platform_get_drvdata(pdev);
struct usb_phy *phy = &motg->phy;
@@ -1746,7 +1746,7 @@
#endif
static struct platform_driver msm_otg_driver = {
- .remove = __devexit_p(msm_otg_remove),
+ .remove = msm_otg_remove,
.driver = {
.name = DRIVER_NAME,
.owner = THIS_MODULE,
diff --git a/drivers/usb/otg/mv_otg.c b/drivers/usb/otg/mv_otg.c
index 3f124e8..1dd5750 100644
--- a/drivers/usb/otg/mv_otg.c
+++ b/drivers/usb/otg/mv_otg.c
@@ -958,16 +958,4 @@
.resume = mv_otg_resume,
#endif
};
-
-static int __init mv_otg_init(void)
-{
- return platform_driver_register(&mv_otg_driver);
-}
-
-static void __exit mv_otg_exit(void)
-{
- platform_driver_unregister(&mv_otg_driver);
-}
-
-module_init(mv_otg_init);
-module_exit(mv_otg_exit);
+module_platform_driver(mv_otg_driver);
diff --git a/drivers/usb/otg/mxs-phy.c b/drivers/usb/otg/mxs-phy.c
index 88db976..7630272 100644
--- a/drivers/usb/otg/mxs-phy.c
+++ b/drivers/usb/otg/mxs-phy.c
@@ -20,7 +20,6 @@
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/io.h>
-#include <linux/workqueue.h>
#define DRIVER_NAME "mxs_phy"
@@ -35,16 +34,9 @@
#define BM_USBPHY_CTRL_ENUTMILEVEL2 BIT(14)
#define BM_USBPHY_CTRL_ENHOSTDISCONDETECT BIT(1)
-/*
- * Amount of delay in miliseconds to safely enable ENHOSTDISCONDETECT bit
- * so that connection and reset processing can be completed for the root hub.
- */
-#define MXY_PHY_ENHOSTDISCONDETECT_DELAY 250
-
struct mxs_phy {
struct usb_phy phy;
struct clk *clk;
- struct delayed_work enhostdiscondetect_work;
};
#define to_mxs_phy(p) container_of((p), struct mxs_phy, phy)
@@ -70,7 +62,6 @@
clk_prepare_enable(mxs_phy->clk);
mxs_phy_hw_init(mxs_phy);
- INIT_DELAYED_WORK(&mxs_phy->enhostdiscondetect_work, NULL);
return 0;
}
@@ -85,46 +76,28 @@
clk_disable_unprepare(mxs_phy->clk);
}
-static void mxs_phy_enhostdiscondetect_delay(struct work_struct *ws)
+static int mxs_phy_on_connect(struct usb_phy *phy,
+ enum usb_device_speed speed)
{
- struct mxs_phy *mxs_phy = container_of(ws, struct mxs_phy,
- enhostdiscondetect_work.work);
+ dev_dbg(phy->dev, "%s speed device has connected\n",
+ (speed == USB_SPEED_HIGH) ? "high" : "non-high");
- /* Enable HOSTDISCONDETECT after delay. */
- dev_dbg(mxs_phy->phy.dev, "Setting ENHOSTDISCONDETECT\n");
- writel_relaxed(BM_USBPHY_CTRL_ENHOSTDISCONDETECT,
- mxs_phy->phy.io_priv + HW_USBPHY_CTRL_SET);
-}
-
-static int mxs_phy_on_connect(struct usb_phy *phy, int port)
-{
- struct mxs_phy *mxs_phy = to_mxs_phy(phy);
-
- dev_dbg(phy->dev, "Connect on port %d\n", port);
-
- mxs_phy_hw_init(mxs_phy);
-
- /*
- * Delay enabling ENHOSTDISCONDETECT so that connection and
- * reset processing can be completed for the root hub.
- */
- dev_dbg(phy->dev, "Delaying setting ENHOSTDISCONDETECT\n");
- PREPARE_DELAYED_WORK(&mxs_phy->enhostdiscondetect_work,
- mxs_phy_enhostdiscondetect_delay);
- schedule_delayed_work(&mxs_phy->enhostdiscondetect_work,
- msecs_to_jiffies(MXY_PHY_ENHOSTDISCONDETECT_DELAY));
+ if (speed == USB_SPEED_HIGH)
+ writel_relaxed(BM_USBPHY_CTRL_ENHOSTDISCONDETECT,
+ phy->io_priv + HW_USBPHY_CTRL_SET);
return 0;
}
-static int mxs_phy_on_disconnect(struct usb_phy *phy, int port)
+static int mxs_phy_on_disconnect(struct usb_phy *phy,
+ enum usb_device_speed speed)
{
- dev_dbg(phy->dev, "Disconnect on port %d\n", port);
+ dev_dbg(phy->dev, "%s speed device has disconnected\n",
+ (speed == USB_SPEED_HIGH) ? "high" : "non-high");
- /* No need to delay before clearing ENHOSTDISCONDETECT. */
- dev_dbg(phy->dev, "Clearing ENHOSTDISCONDETECT\n");
- writel_relaxed(BM_USBPHY_CTRL_ENHOSTDISCONDETECT,
- phy->io_priv + HW_USBPHY_CTRL_CLR);
+ if (speed == USB_SPEED_HIGH)
+ writel_relaxed(BM_USBPHY_CTRL_ENHOSTDISCONDETECT,
+ phy->io_priv + HW_USBPHY_CTRL_CLR);
return 0;
}
@@ -176,7 +149,7 @@
return 0;
}
-static int __devexit mxs_phy_remove(struct platform_device *pdev)
+static int mxs_phy_remove(struct platform_device *pdev)
{
platform_set_drvdata(pdev, NULL);
@@ -191,7 +164,7 @@
static struct platform_driver mxs_phy_driver = {
.probe = mxs_phy_probe,
- .remove = __devexit_p(mxs_phy_remove),
+ .remove = mxs_phy_remove,
.driver = {
.name = DRIVER_NAME,
.owner = THIS_MODULE,
diff --git a/drivers/usb/otg/nop-usb-xceiv.c b/drivers/usb/otg/nop-usb-xceiv.c
index e52e35e..a3ce24b 100644
--- a/drivers/usb/otg/nop-usb-xceiv.c
+++ b/drivers/usb/otg/nop-usb-xceiv.c
@@ -93,7 +93,7 @@
return 0;
}
-static int __devinit nop_usb_xceiv_probe(struct platform_device *pdev)
+static int nop_usb_xceiv_probe(struct platform_device *pdev)
{
struct nop_usb_xceiv_platform_data *pdata = pdev->dev.platform_data;
struct nop_usb_xceiv *nop;
@@ -141,7 +141,7 @@
return err;
}
-static int __devexit nop_usb_xceiv_remove(struct platform_device *pdev)
+static int nop_usb_xceiv_remove(struct platform_device *pdev)
{
struct nop_usb_xceiv *nop = platform_get_drvdata(pdev);
@@ -156,7 +156,7 @@
static struct platform_driver nop_usb_xceiv_driver = {
.probe = nop_usb_xceiv_probe,
- .remove = __devexit_p(nop_usb_xceiv_remove),
+ .remove = nop_usb_xceiv_remove,
.driver = {
.name = "nop_usb_xceiv",
.owner = THIS_MODULE,
diff --git a/drivers/usb/otg/twl4030-usb.c b/drivers/usb/otg/twl4030-usb.c
index f0d2e75..0a70193 100644
--- a/drivers/usb/otg/twl4030-usb.c
+++ b/drivers/usb/otg/twl4030-usb.c
@@ -123,10 +123,10 @@
#define PHY_CLK_CTRL_STS 0xFF
#define PHY_DPLL_CLK (1 << 0)
-/* In module TWL4030_MODULE_PM_MASTER */
+/* In module TWL_MODULE_PM_MASTER */
#define STS_HW_CONDITIONS 0x0F
-/* In module TWL4030_MODULE_PM_RECEIVER */
+/* In module TWL_MODULE_PM_RECEIVER */
#define VUSB_DEDICATED1 0x7D
#define VUSB_DEDICATED2 0x7E
#define VUSB1V5_DEV_GRP 0x71
@@ -195,14 +195,14 @@
}
#define twl4030_usb_write_verify(twl, address, data) \
- twl4030_i2c_write_u8_verify(twl, TWL4030_MODULE_USB, (data), (address))
+ twl4030_i2c_write_u8_verify(twl, TWL_MODULE_USB, (data), (address))
static inline int twl4030_usb_write(struct twl4030_usb *twl,
u8 address, u8 data)
{
int ret = 0;
- ret = twl_i2c_write_u8(TWL4030_MODULE_USB, data, address);
+ ret = twl_i2c_write_u8(TWL_MODULE_USB, data, address);
if (ret < 0)
dev_dbg(twl->dev,
"TWL4030:USB:Write[0x%x] Error %d\n", address, ret);
@@ -227,7 +227,7 @@
static inline int twl4030_usb_read(struct twl4030_usb *twl, u8 address)
{
- return twl4030_readb(twl, TWL4030_MODULE_USB, address);
+ return twl4030_readb(twl, TWL_MODULE_USB, address);
}
/*-------------------------------------------------------------------------*/
@@ -264,8 +264,7 @@
* signal is active, the OTG module is activated, and
* its interrupt may be raised (may wake the system).
*/
- status = twl4030_readb(twl, TWL4030_MODULE_PM_MASTER,
- STS_HW_CONDITIONS);
+ status = twl4030_readb(twl, TWL_MODULE_PM_MASTER, STS_HW_CONDITIONS);
if (status < 0)
dev_err(twl->dev, "USB link status err %d\n", status);
else if (status & (BIT(7) | BIT(2))) {
@@ -372,8 +371,7 @@
* SLEEP. We work around this by clearing the bit after usv3v1
* is re-activated. This ensures that VUSB3V1 is really active.
*/
- twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0,
- VUSB_DEDICATED2);
+ twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB_DEDICATED2);
regulator_enable(twl->usb1v5);
__twl4030_phy_power(twl, 1);
twl4030_usb_write(twl, PHY_CLK_CTRL,
@@ -419,50 +417,48 @@
static int twl4030_usb_ldo_init(struct twl4030_usb *twl)
{
/* Enable writing to power configuration registers */
- twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER,
- TWL4030_PM_MASTER_KEY_CFG1,
- TWL4030_PM_MASTER_PROTECT_KEY);
+ twl_i2c_write_u8(TWL_MODULE_PM_MASTER, TWL4030_PM_MASTER_KEY_CFG1,
+ TWL4030_PM_MASTER_PROTECT_KEY);
- twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER,
- TWL4030_PM_MASTER_KEY_CFG2,
- TWL4030_PM_MASTER_PROTECT_KEY);
+ twl_i2c_write_u8(TWL_MODULE_PM_MASTER, TWL4030_PM_MASTER_KEY_CFG2,
+ TWL4030_PM_MASTER_PROTECT_KEY);
/* Keep VUSB3V1 LDO in sleep state until VBUS/ID change detected*/
- /*twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB_DEDICATED2);*/
+ /*twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB_DEDICATED2);*/
/* input to VUSB3V1 LDO is from VBAT, not VBUS */
- twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x14, VUSB_DEDICATED1);
+ twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0x14, VUSB_DEDICATED1);
/* Initialize 3.1V regulator */
- twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB3V1_DEV_GRP);
+ twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB3V1_DEV_GRP);
twl->usb3v1 = regulator_get(twl->dev, "usb3v1");
if (IS_ERR(twl->usb3v1))
return -ENODEV;
- twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB3V1_TYPE);
+ twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB3V1_TYPE);
/* Initialize 1.5V regulator */
- twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB1V5_DEV_GRP);
+ twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB1V5_DEV_GRP);
twl->usb1v5 = regulator_get(twl->dev, "usb1v5");
if (IS_ERR(twl->usb1v5))
goto fail1;
- twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB1V5_TYPE);
+ twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB1V5_TYPE);
/* Initialize 1.8V regulator */
- twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB1V8_DEV_GRP);
+ twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB1V8_DEV_GRP);
twl->usb1v8 = regulator_get(twl->dev, "usb1v8");
if (IS_ERR(twl->usb1v8))
goto fail2;
- twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB1V8_TYPE);
+ twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB1V8_TYPE);
/* disable access to power configuration registers */
- twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, 0,
- TWL4030_PM_MASTER_PROTECT_KEY);
+ twl_i2c_write_u8(TWL_MODULE_PM_MASTER, 0,
+ TWL4030_PM_MASTER_PROTECT_KEY);
return 0;
@@ -579,7 +575,7 @@
return 0;
}
-static int __devinit twl4030_usb_probe(struct platform_device *pdev)
+static int twl4030_usb_probe(struct platform_device *pdev)
{
struct twl4030_usb_data *pdata = pdev->dev.platform_data;
struct twl4030_usb *twl;
diff --git a/drivers/usb/otg/twl6030-usb.c b/drivers/usb/otg/twl6030-usb.c
index fcadef7..8cd6cf4 100644
--- a/drivers/usb/otg/twl6030-usb.c
+++ b/drivers/usb/otg/twl6030-usb.c
@@ -310,7 +310,7 @@
return 0;
}
-static int __devinit twl6030_usb_probe(struct platform_device *pdev)
+static int twl6030_usb_probe(struct platform_device *pdev)
{
u32 ret;
struct twl6030_usb *twl;
diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
index 63c339b..7eb73c5 100644
--- a/drivers/usb/phy/Kconfig
+++ b/drivers/usb/phy/Kconfig
@@ -32,3 +32,15 @@
help
Enable this to support Marvell USB 3.0 phy controller for Marvell
SoC.
+
+config USB_RCAR_PHY
+ tristate "Renesas R-Car USB phy support"
+ depends on USB || USB_GADGET
+ select USB_OTG_UTILS
+ help
+ Say Y here to add support for the Renesas R-Car USB phy driver.
+ This chip is typically used as USB phy for USB host, gadget.
+ This driver supports: R8A7779
+
+ To compile this driver as a module, choose M here: the
+ module will be called rcar-phy.
diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
index b069f29..1a579a8 100644
--- a/drivers/usb/phy/Makefile
+++ b/drivers/usb/phy/Makefile
@@ -8,3 +8,4 @@
obj-$(CONFIG_USB_ISP1301) += isp1301.o
obj-$(CONFIG_MV_U3D_PHY) += mv_u3d_phy.o
obj-$(CONFIG_USB_EHCI_TEGRA) += tegra_usb_phy.o
+obj-$(CONFIG_USB_RCAR_PHY) += rcar-phy.o
diff --git a/drivers/usb/phy/mv_u3d_phy.c b/drivers/usb/phy/mv_u3d_phy.c
index 9f1c5d3..eaddbe3 100644
--- a/drivers/usb/phy/mv_u3d_phy.c
+++ b/drivers/usb/phy/mv_u3d_phy.c
@@ -262,7 +262,7 @@
return 0;
}
-static int __devinit mv_u3d_phy_probe(struct platform_device *pdev)
+static int mv_u3d_phy_probe(struct platform_device *pdev)
{
struct mv_u3d_phy *mv_u3d_phy;
struct mv_usb_platform_data *pdata;
@@ -331,7 +331,7 @@
static struct platform_driver mv_u3d_phy_driver = {
.probe = mv_u3d_phy_probe,
- .remove = __devexit_p(mv_u3d_phy_remove),
+ .remove = mv_u3d_phy_remove,
.driver = {
.name = "mv-u3d-phy",
.owner = THIS_MODULE,
diff --git a/drivers/usb/phy/omap-usb2.c b/drivers/usb/phy/omap-usb2.c
index 15ab3d6..26ae8f4 100644
--- a/drivers/usb/phy/omap-usb2.c
+++ b/drivers/usb/phy/omap-usb2.c
@@ -141,7 +141,7 @@
return 0;
}
-static int __devinit omap_usb2_probe(struct platform_device *pdev)
+static int omap_usb2_probe(struct platform_device *pdev)
{
struct omap_usb *phy;
struct usb_otg *otg;
@@ -199,7 +199,7 @@
return 0;
}
-static int __devexit omap_usb2_remove(struct platform_device *pdev)
+static int omap_usb2_remove(struct platform_device *pdev)
{
struct omap_usb *phy = platform_get_drvdata(pdev);
@@ -254,7 +254,7 @@
static struct platform_driver omap_usb2_driver = {
.probe = omap_usb2_probe,
- .remove = __devexit_p(omap_usb2_remove),
+ .remove = omap_usb2_remove,
.driver = {
.name = "omap-usb2",
.owner = THIS_MODULE,
diff --git a/drivers/usb/phy/rcar-phy.c b/drivers/usb/phy/rcar-phy.c
new file mode 100644
index 0000000..a35681b
--- /dev/null
+++ b/drivers/usb/phy/rcar-phy.c
@@ -0,0 +1,220 @@
+/*
+ * Renesas R-Car USB phy driver
+ *
+ * Copyright (C) 2012 Renesas Solutions Corp.
+ * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/usb/otg.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+#include <linux/module.h>
+
+/* USBH common register */
+#define USBPCTRL0 0x0800
+#define USBPCTRL1 0x0804
+#define USBST 0x0808
+#define USBEH0 0x080C
+#define USBOH0 0x081C
+#define USBCTL0 0x0858
+#define EIIBC1 0x0094
+#define EIIBC2 0x009C
+
+/* USBPCTRL1 */
+#define PHY_RST (1 << 2)
+#define PLL_ENB (1 << 1)
+#define PHY_ENB (1 << 0)
+
+/* USBST */
+#define ST_ACT (1 << 31)
+#define ST_PLL (1 << 30)
+
+struct rcar_usb_phy_priv {
+ struct usb_phy phy;
+ spinlock_t lock;
+
+ void __iomem *reg0;
+ void __iomem *reg1;
+ int counter;
+};
+
+#define usb_phy_to_priv(p) container_of(p, struct rcar_usb_phy_priv, phy)
+
+
+/*
+ * USB initial/install operation.
+ *
+ * This function setup USB phy.
+ * The used value and setting order came from
+ * [USB :: Initial setting] on datasheet.
+ */
+static int rcar_usb_phy_init(struct usb_phy *phy)
+{
+ struct rcar_usb_phy_priv *priv = usb_phy_to_priv(phy);
+ struct device *dev = phy->dev;
+ void __iomem *reg0 = priv->reg0;
+ void __iomem *reg1 = priv->reg1;
+ int i;
+ u32 val;
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ if (priv->counter++ == 0) {
+
+ /*
+ * USB phy start-up
+ */
+
+ /* (1) USB-PHY standby release */
+ iowrite32(PHY_ENB, (reg0 + USBPCTRL1));
+
+ /* (2) start USB-PHY internal PLL */
+ iowrite32(PHY_ENB | PLL_ENB, (reg0 + USBPCTRL1));
+
+ /* (3) USB module status check */
+ for (i = 0; i < 1024; i++) {
+ udelay(10);
+ val = ioread32(reg0 + USBST);
+ if (val == (ST_ACT | ST_PLL))
+ break;
+ }
+
+ if (val != (ST_ACT | ST_PLL)) {
+ dev_err(dev, "USB phy not ready\n");
+ goto phy_init_end;
+ }
+
+ /* (4) USB-PHY reset clear */
+ iowrite32(PHY_ENB | PLL_ENB | PHY_RST, (reg0 + USBPCTRL1));
+
+ /* set platform specific port settings */
+ iowrite32(0x00000000, (reg0 + USBPCTRL0));
+
+ /*
+ * EHCI IP internal buffer setting
+ * EHCI IP internal buffer enable
+ *
+ * These are recommended value of a datasheet
+ * see [USB :: EHCI internal buffer setting]
+ */
+ iowrite32(0x00ff0040, (reg0 + EIIBC1));
+ iowrite32(0x00ff0040, (reg1 + EIIBC1));
+
+ iowrite32(0x00000001, (reg0 + EIIBC2));
+ iowrite32(0x00000001, (reg1 + EIIBC2));
+
+ /*
+ * Bus alignment settings
+ */
+
+ /* (1) EHCI bus alignment (little endian) */
+ iowrite32(0x00000000, (reg0 + USBEH0));
+
+ /* (1) OHCI bus alignment (little endian) */
+ iowrite32(0x00000000, (reg0 + USBOH0));
+ }
+
+phy_init_end:
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ return 0;
+}
+
+static void rcar_usb_phy_shutdown(struct usb_phy *phy)
+{
+ struct rcar_usb_phy_priv *priv = usb_phy_to_priv(phy);
+ void __iomem *reg0 = priv->reg0;
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->lock, flags);
+
+ if (priv->counter-- == 1) { /* last user */
+ iowrite32(0x00000000, (reg0 + USBPCTRL0));
+ iowrite32(0x00000000, (reg0 + USBPCTRL1));
+ }
+
+ spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+static int rcar_usb_phy_probe(struct platform_device *pdev)
+{
+ struct rcar_usb_phy_priv *priv;
+ struct resource *res0, *res1;
+ struct device *dev = &pdev->dev;
+ void __iomem *reg0, *reg1;
+ int ret;
+
+ res0 = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ res1 = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ if (!res0 || !res1) {
+ dev_err(dev, "Not enough platform resources\n");
+ return -EINVAL;
+ }
+
+ /*
+ * CAUTION
+ *
+ * Because this phy address is also mapped under OHCI/EHCI address area,
+ * this driver can't use devm_request_and_ioremap(dev, res) here
+ */
+ reg0 = devm_ioremap_nocache(dev, res0->start, resource_size(res0));
+ reg1 = devm_ioremap_nocache(dev, res1->start, resource_size(res1));
+ if (!reg0 || !reg1) {
+ dev_err(dev, "ioremap error\n");
+ return -ENOMEM;
+ }
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv) {
+ dev_err(dev, "priv data allocation error\n");
+ return -ENOMEM;
+ }
+
+ priv->reg0 = reg0;
+ priv->reg1 = reg1;
+ priv->counter = 0;
+ priv->phy.dev = dev;
+ priv->phy.label = dev_name(dev);
+ priv->phy.init = rcar_usb_phy_init;
+ priv->phy.shutdown = rcar_usb_phy_shutdown;
+ spin_lock_init(&priv->lock);
+
+ ret = usb_add_phy(&priv->phy, USB_PHY_TYPE_USB2);
+ if (ret < 0) {
+ dev_err(dev, "usb phy addition error\n");
+ return ret;
+ }
+
+ platform_set_drvdata(pdev, priv);
+
+ return ret;
+}
+
+static int rcar_usb_phy_remove(struct platform_device *pdev)
+{
+ struct rcar_usb_phy_priv *priv = platform_get_drvdata(pdev);
+
+ usb_remove_phy(&priv->phy);
+
+ return 0;
+}
+
+static struct platform_driver rcar_usb_phy_driver = {
+ .driver = {
+ .name = "rcar_usb_phy",
+ },
+ .probe = rcar_usb_phy_probe,
+ .remove = rcar_usb_phy_remove,
+};
+
+module_platform_driver(rcar_usb_phy_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Renesas R-Car USB phy");
+MODULE_AUTHOR("Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>");
diff --git a/drivers/usb/phy/tegra_usb_phy.c b/drivers/usb/phy/tegra_usb_phy.c
index 987116f9..9d13c81 100644
--- a/drivers/usb/phy/tegra_usb_phy.c
+++ b/drivers/usb/phy/tegra_usb_phy.c
@@ -29,7 +29,9 @@
#include <linux/usb/ulpi.h>
#include <asm/mach-types.h>
#include <linux/usb/tegra_usb_phy.h>
-#include <mach/iomap.h>
+
+#define TEGRA_USB_BASE 0xC5000000
+#define TEGRA_USB_SIZE SZ_16K
#define ULPI_VIEWPORT 0x170
diff --git a/drivers/usb/renesas_usbhs/common.c b/drivers/usb/renesas_usbhs/common.c
index 072edc1..38bce04 100644
--- a/drivers/usb/renesas_usbhs/common.c
+++ b/drivers/usb/renesas_usbhs/common.c
@@ -132,6 +132,11 @@
usbhs_bset(priv, SYSCFG, mask, enable ? val : 0);
}
+void usbhs_sys_function_pullup(struct usbhs_priv *priv, int enable)
+{
+ usbhs_bset(priv, SYSCFG, DPRPU, enable ? DPRPU : 0);
+}
+
void usbhs_sys_set_test_mode(struct usbhs_priv *priv, u16 mode)
{
usbhs_write(priv, TESTMODE, mode);
@@ -551,7 +556,7 @@
return ret;
}
-static int __devexit usbhs_remove(struct platform_device *pdev)
+static int usbhs_remove(struct platform_device *pdev)
{
struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev);
struct renesas_usbhs_platform_info *info = pdev->dev.platform_data;
@@ -631,7 +636,7 @@
.pm = &usbhsc_pm_ops,
},
.probe = usbhs_probe,
- .remove = __devexit_p(usbhs_remove),
+ .remove = usbhs_remove,
};
module_platform_driver(renesas_usbhs_driver);
diff --git a/drivers/usb/renesas_usbhs/common.h b/drivers/usb/renesas_usbhs/common.h
index dddf40a..c69dd2f 100644
--- a/drivers/usb/renesas_usbhs/common.h
+++ b/drivers/usb/renesas_usbhs/common.h
@@ -285,6 +285,7 @@
*/
void usbhs_sys_host_ctrl(struct usbhs_priv *priv, int enable);
void usbhs_sys_function_ctrl(struct usbhs_priv *priv, int enable);
+void usbhs_sys_function_pullup(struct usbhs_priv *priv, int enable);
void usbhs_sys_set_test_mode(struct usbhs_priv *priv, u16 mode);
/*
diff --git a/drivers/usb/renesas_usbhs/fifo.c b/drivers/usb/renesas_usbhs/fifo.c
index c021b20..9538f0f 100644
--- a/drivers/usb/renesas_usbhs/fifo.c
+++ b/drivers/usb/renesas_usbhs/fifo.c
@@ -163,7 +163,7 @@
func = pkt->handler->dma_done;
break;
default:
- dev_err(dev, "unknown pkt hander\n");
+ dev_err(dev, "unknown pkt handler\n");
goto __usbhs_pkt_handler_end;
}
@@ -192,8 +192,8 @@
/*
* irq enable/disable function
*/
-#define usbhsf_irq_empty_ctrl(p, e) usbhsf_irq_callback_ctrl(p, bempsts, e)
-#define usbhsf_irq_ready_ctrl(p, e) usbhsf_irq_callback_ctrl(p, brdysts, e)
+#define usbhsf_irq_empty_ctrl(p, e) usbhsf_irq_callback_ctrl(p, irq_bempsts, e)
+#define usbhsf_irq_ready_ctrl(p, e) usbhsf_irq_callback_ctrl(p, irq_brdysts, e)
#define usbhsf_irq_callback_ctrl(pipe, status, enable) \
({ \
struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); \
@@ -202,9 +202,9 @@
if (!mod) \
return; \
if (enable) \
- mod->irq_##status |= status; \
+ mod->status |= status; \
else \
- mod->irq_##status &= ~status; \
+ mod->status &= ~status; \
usbhs_irq_callback_update(priv, mod); \
})
@@ -488,6 +488,8 @@
usbhs_pipe_data_sequence(pipe, pkt->sequence);
pkt->sequence = -1; /* -1 sequence will be ignored */
+ usbhs_pipe_set_trans_count_if_bulk(pipe, pkt->length);
+
ret = usbhsf_fifo_select(pipe, fifo, 1);
if (ret < 0)
return 0;
@@ -594,6 +596,7 @@
usbhs_pipe_data_sequence(pipe, pkt->sequence);
pkt->sequence = -1; /* -1 sequence will be ignored */
+ usbhs_pipe_set_trans_count_if_bulk(pipe, pkt->length);
usbhs_pipe_enable(pipe);
usbhsf_rx_irq_ctrl(pipe, 1);
@@ -795,6 +798,7 @@
dev_dbg(dev, " %s %d (%d/ %d)\n",
fifo->name, usbhs_pipe_number(pipe), pkt->length, pkt->zero);
+ usbhs_pipe_set_trans_count_if_bulk(pipe, pkt->trans);
usbhs_pipe_enable(pipe);
usbhsf_dma_start(pipe, fifo);
dma_async_issue_pending(chan);
diff --git a/drivers/usb/renesas_usbhs/mod.c b/drivers/usb/renesas_usbhs/mod.c
index 61933a9..6a030b9 100644
--- a/drivers/usb/renesas_usbhs/mod.c
+++ b/drivers/usb/renesas_usbhs/mod.c
@@ -151,7 +151,7 @@
goto mod_init_host_err;
/* irq settings */
- ret = request_irq(priv->irq, usbhs_interrupt,
+ ret = devm_request_irq(dev, priv->irq, usbhs_interrupt,
priv->irqflags, dev_name(dev), priv);
if (ret) {
dev_err(dev, "irq request err\n");
@@ -172,7 +172,6 @@
{
usbhs_mod_host_remove(priv);
usbhs_mod_gadget_remove(priv);
- free_irq(priv->irq, priv);
}
/*
diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c b/drivers/usb/renesas_usbhs/mod_gadget.c
index 28478ce..dd41f61 100644
--- a/drivers/usb/renesas_usbhs/mod_gadget.c
+++ b/drivers/usb/renesas_usbhs/mod_gadget.c
@@ -883,6 +883,16 @@
return usbhs_frame_get_num(priv);
}
+static int usbhsg_pullup(struct usb_gadget *gadget, int is_on)
+{
+ struct usbhsg_gpriv *gpriv = usbhsg_gadget_to_gpriv(gadget);
+ struct usbhs_priv *priv = usbhsg_gpriv_to_priv(gpriv);
+
+ usbhs_sys_function_pullup(priv, is_on);
+
+ return 0;
+}
+
static int usbhsg_set_selfpowered(struct usb_gadget *gadget, int is_self)
{
struct usbhsg_gpriv *gpriv = usbhsg_gadget_to_gpriv(gadget);
@@ -900,6 +910,7 @@
.set_selfpowered = usbhsg_set_selfpowered,
.udc_start = usbhsg_gadget_start,
.udc_stop = usbhsg_gadget_stop,
+ .pullup = usbhsg_pullup,
};
static int usbhsg_start(struct usbhs_priv *priv)
diff --git a/drivers/usb/renesas_usbhs/mod_host.c b/drivers/usb/renesas_usbhs/mod_host.c
index 069cd76..3d3cd6c 100644
--- a/drivers/usb/renesas_usbhs/mod_host.c
+++ b/drivers/usb/renesas_usbhs/mod_host.c
@@ -85,6 +85,7 @@
struct usbhsh_device *udev; /* attached udev */
struct usb_host_endpoint *ep;
struct list_head ep_list; /* list to usbhsh_device */
+ unsigned int counter; /* pipe attach counter */
};
#define USBHSH_DEVICE_MAX 10 /* see DEVADDn / DCPMAXP / PIPEMAXP */
@@ -271,8 +272,12 @@
/******************** spin lock ********************/
usbhs_lock(priv, flags);
- if (unlikely(usbhsh_uep_to_pipe(uep))) {
- dev_err(dev, "uep already has pipe\n");
+ /*
+ * if uep has been attached to pipe,
+ * reuse it
+ */
+ if (usbhsh_uep_to_pipe(uep)) {
+ ret = 0;
goto usbhsh_pipe_attach_done;
}
@@ -320,6 +325,9 @@
}
usbhsh_pipe_attach_done:
+ if (0 == ret)
+ uep->counter++;
+
usbhs_unlock(priv, flags);
/******************** spin unlock ******************/
@@ -346,7 +354,7 @@
if (unlikely(!pipe)) {
dev_err(dev, "uep doens't have pipe\n");
- } else {
+ } else if (1 == uep->counter--) { /* last user */
struct usb_host_endpoint *ep = usbhsh_uep_to_ep(uep);
struct usbhsh_device *udev = usbhsh_uep_to_udev(uep);
@@ -391,6 +399,7 @@
/*
* init endpoint
*/
+ uep->counter = 0;
INIT_LIST_HEAD(&uep->ep_list);
list_add_tail(&uep->ep_list, &udev->ep_list_head);
@@ -686,9 +695,9 @@
}
if (usb_pipein(urb->pipe))
- pipe->handler = &usbhs_fifo_pio_pop_handler;
+ pipe->handler = &usbhs_fifo_dma_pop_handler;
else
- pipe->handler = &usbhs_fifo_pio_push_handler;
+ pipe->handler = &usbhs_fifo_dma_push_handler;
buf = (void *)(urb->transfer_buffer + urb->actual_length);
len = urb->transfer_buffer_length - urb->actual_length;
@@ -921,6 +930,19 @@
*/
static int usbhsh_dma_map_ctrl(struct usbhs_pkt *pkt, int map)
{
+ if (map) {
+ struct usbhsh_request *ureq = usbhsh_pkt_to_ureq(pkt);
+ struct urb *urb = ureq->urb;
+
+ /* it can not use scatter/gather */
+ if (urb->num_sgs)
+ return -EINVAL;
+
+ pkt->dma = urb->transfer_dma;
+ if (!pkt->dma)
+ return -EINVAL;
+ }
+
return 0;
}
@@ -946,7 +968,6 @@
struct usb_host_endpoint *ep = urb->ep;
struct usbhsh_device *new_udev = NULL;
int is_dir_in = usb_pipein(urb->pipe);
- int i;
int ret;
dev_dbg(dev, "%s (%s)\n", __func__, is_dir_in ? "in" : "out");
@@ -992,13 +1013,7 @@
* attach pipe to endpoint
* see [image of mod_host]
*/
- for (i = 0; i < 1024; i++) {
- ret = usbhsh_pipe_attach(hpriv, urb);
- if (ret < 0)
- msleep(100);
- else
- break;
- }
+ ret = usbhsh_pipe_attach(hpriv, urb);
if (ret < 0) {
dev_err(dev, "pipe attach failed\n");
goto usbhsh_urb_enqueue_error_free_endpoint;
@@ -1072,8 +1087,6 @@
static int usbhsh_hub_status_data(struct usb_hcd *hcd, char *buf)
{
struct usbhsh_hpriv *hpriv = usbhsh_hcd_to_hpriv(hcd);
- struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
- struct device *dev = usbhs_priv_to_dev(priv);
int roothub_id = 1; /* only 1 root hub */
/*
@@ -1085,8 +1098,6 @@
else
*buf = 0;
- dev_dbg(dev, "%s (%02x)\n", __func__, *buf);
-
return !!(*buf);
}
diff --git a/drivers/usb/renesas_usbhs/pipe.c b/drivers/usb/renesas_usbhs/pipe.c
index 122526c..7926e1c 100644
--- a/drivers/usb/renesas_usbhs/pipe.c
+++ b/drivers/usb/renesas_usbhs/pipe.c
@@ -93,6 +93,82 @@
}
/*
+ * PIPEnTRN/PIPEnTRE functions
+ */
+static void usbhsp_pipe_trn_set(struct usbhs_pipe *pipe, u16 mask, u16 val)
+{
+ struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
+ struct device *dev = usbhs_priv_to_dev(priv);
+ int num = usbhs_pipe_number(pipe);
+ u16 reg;
+
+ /*
+ * It is impossible to calculate address,
+ * since PIPEnTRN addresses were mapped randomly.
+ */
+#define CASE_PIPExTRN(a) \
+ case 0x ## a: \
+ reg = PIPE ## a ## TRN; \
+ break;
+
+ switch (num) {
+ CASE_PIPExTRN(1);
+ CASE_PIPExTRN(2);
+ CASE_PIPExTRN(3);
+ CASE_PIPExTRN(4);
+ CASE_PIPExTRN(5);
+ CASE_PIPExTRN(B);
+ CASE_PIPExTRN(C);
+ CASE_PIPExTRN(D);
+ CASE_PIPExTRN(E);
+ CASE_PIPExTRN(F);
+ CASE_PIPExTRN(9);
+ CASE_PIPExTRN(A);
+ default:
+ dev_err(dev, "unknown pipe (%d)\n", num);
+ return;
+ }
+ __usbhsp_pipe_xxx_set(pipe, 0, reg, mask, val);
+}
+
+static void usbhsp_pipe_tre_set(struct usbhs_pipe *pipe, u16 mask, u16 val)
+{
+ struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
+ struct device *dev = usbhs_priv_to_dev(priv);
+ int num = usbhs_pipe_number(pipe);
+ u16 reg;
+
+ /*
+ * It is impossible to calculate address,
+ * since PIPEnTRE addresses were mapped randomly.
+ */
+#define CASE_PIPExTRE(a) \
+ case 0x ## a: \
+ reg = PIPE ## a ## TRE; \
+ break;
+
+ switch (num) {
+ CASE_PIPExTRE(1);
+ CASE_PIPExTRE(2);
+ CASE_PIPExTRE(3);
+ CASE_PIPExTRE(4);
+ CASE_PIPExTRE(5);
+ CASE_PIPExTRE(B);
+ CASE_PIPExTRE(C);
+ CASE_PIPExTRE(D);
+ CASE_PIPExTRE(E);
+ CASE_PIPExTRE(F);
+ CASE_PIPExTRE(9);
+ CASE_PIPExTRE(A);
+ default:
+ dev_err(dev, "unknown pipe (%d)\n", num);
+ return;
+ }
+
+ __usbhsp_pipe_xxx_set(pipe, 0, reg, mask, val);
+}
+
+/*
* PIPEBUF
*/
static void usbhsp_pipe_buf_set(struct usbhs_pipe *pipe, u16 mask, u16 val)
@@ -264,6 +340,31 @@
return (int)(pid == PID_STALL10 || pid == PID_STALL11);
}
+void usbhs_pipe_set_trans_count_if_bulk(struct usbhs_pipe *pipe, int len)
+{
+ if (!usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_BULK))
+ return;
+
+ /*
+ * clear and disable transfer counter for IN/OUT pipe
+ */
+ usbhsp_pipe_tre_set(pipe, TRCLR | TRENB, TRCLR);
+
+ /*
+ * Only IN direction bulk pipe can use transfer count.
+ * Without using this function,
+ * received data will break if it was large data size.
+ * see PIPEnTRN/PIPEnTRE for detail
+ */
+ if (usbhs_pipe_is_dir_in(pipe)) {
+ int maxp = usbhs_pipe_get_maxpacket(pipe);
+
+ usbhsp_pipe_trn_set(pipe, 0xffff, DIV_ROUND_UP(len, maxp));
+ usbhsp_pipe_tre_set(pipe, TRENB, TRENB); /* enable */
+ }
+}
+
+
/*
* pipe setup
*/
diff --git a/drivers/usb/renesas_usbhs/pipe.h b/drivers/usb/renesas_usbhs/pipe.h
index 3d80c7b..b476fde 100644
--- a/drivers/usb/renesas_usbhs/pipe.h
+++ b/drivers/usb/renesas_usbhs/pipe.h
@@ -88,6 +88,7 @@
void usbhs_pipe_disable(struct usbhs_pipe *pipe);
void usbhs_pipe_stall(struct usbhs_pipe *pipe);
int usbhs_pipe_is_stall(struct usbhs_pipe *pipe);
+void usbhs_pipe_set_trans_count_if_bulk(struct usbhs_pipe *pipe, int len);
void usbhs_pipe_select_fifo(struct usbhs_pipe *pipe, struct usbhs_fifo *fifo);
void usbhs_pipe_config_update(struct usbhs_pipe *pipe, u16 devsel,
u16 epnum, u16 maxp);
diff --git a/drivers/usb/serial/aircable.c b/drivers/usb/serial/aircable.c
index 54e1bb6..6d110a3 100644
--- a/drivers/usb/serial/aircable.c
+++ b/drivers/usb/serial/aircable.c
@@ -68,10 +68,6 @@
#define THROTTLED 0x01
#define ACTUALLY_THROTTLED 0x02
-/*
- * Version Information
- */
-#define DRIVER_VERSION "v2.0"
#define DRIVER_AUTHOR "Naranjo, Manuel Francisco <naranjo.manuel@gmail.com>, Johan Hovold <jhovold@gmail.com>"
#define DRIVER_DESC "AIRcable USB Driver"
@@ -192,5 +188,4 @@
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_VERSION(DRIVER_VERSION);
MODULE_LICENSE("GPL");
diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c
index bd50a8a4..a88882c 100644
--- a/drivers/usb/serial/ark3116.c
+++ b/drivers/usb/serial/ark3116.c
@@ -37,11 +37,6 @@
#include <linux/mutex.h>
#include <linux/spinlock.h>
-/*
- * Version information
- */
-
-#define DRIVER_VERSION "v0.7"
#define DRIVER_AUTHOR "Bart Hartgers <bart.hartgers+ark3116@gmail.com>"
#define DRIVER_DESC "USB ARK3116 serial/IrDA driver"
#define DRIVER_DEV_DESC "ARK3116 RS232/IrDA"
diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c
index ea29556..b72a4c1 100644
--- a/drivers/usb/serial/belkin_sa.c
+++ b/drivers/usb/serial/belkin_sa.c
@@ -37,10 +37,6 @@
#include <linux/usb/serial.h>
#include "belkin_sa.h"
-/*
- * Version Information
- */
-#define DRIVER_VERSION "v1.3"
#define DRIVER_AUTHOR "William Greathouse <wgreathouse@smva.com>"
#define DRIVER_DESC "USB Belkin Serial converter driver"
@@ -509,5 +505,4 @@
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_VERSION(DRIVER_VERSION);
MODULE_LICENSE("GPL");
diff --git a/drivers/usb/serial/bus.c b/drivers/usb/serial/bus.c
index c15f2e7..37decb1 100644
--- a/drivers/usb/serial/bus.c
+++ b/drivers/usb/serial/bus.c
@@ -121,7 +121,6 @@
return retval;
}
-#ifdef CONFIG_HOTPLUG
static ssize_t store_new_id(struct device_driver *driver,
const char *buf, size_t count)
{
@@ -159,15 +158,6 @@
spin_unlock(&drv->dynids.lock);
}
-#else
-static struct driver_attribute drv_attrs[] = {
- __ATTR_NULL,
-};
-static inline void free_dynids(struct usb_serial_driver *drv)
-{
-}
-#endif
-
struct bus_type usb_serial_bus_type = {
.name = "usb-serial",
.match = usb_serial_device_match,
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index eb033fc..f14736f 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -24,10 +24,6 @@
#include <linux/uaccess.h>
#include <linux/usb/serial.h>
-/*
- * Version Information
- */
-#define DRIVER_VERSION "v0.09"
#define DRIVER_DESC "Silicon Labs CP210x RS232 serial adaptor driver"
/*
@@ -35,8 +31,7 @@
*/
static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *);
static void cp210x_close(struct usb_serial_port *);
-static void cp210x_get_termios(struct tty_struct *,
- struct usb_serial_port *port);
+static void cp210x_get_termios(struct tty_struct *, struct usb_serial_port *);
static void cp210x_get_termios_port(struct usb_serial_port *port,
unsigned int *cflagp, unsigned int *baudp);
static void cp210x_change_speed(struct tty_struct *, struct usb_serial_port *,
@@ -118,6 +113,7 @@
{ USB_DEVICE(0x10C4, 0x8477) }, /* Balluff RFID */
{ USB_DEVICE(0x10C4, 0x85EA) }, /* AC-Services IBUS-IF */
{ USB_DEVICE(0x10C4, 0x85EB) }, /* AC-Services CIS-IBUS */
+ { USB_DEVICE(0x10C4, 0x85F8) }, /* Virtenio Preon32 */
{ USB_DEVICE(0x10C4, 0x8664) }, /* AC-Services CAN-IF */
{ USB_DEVICE(0x10C4, 0x8665) }, /* AC-Services OBD-IF */
{ USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
@@ -169,7 +165,7 @@
static struct usb_serial_driver cp210x_device = {
.driver = {
.owner = THIS_MODULE,
- .name = "cp210x",
+ .name = "cp210x",
},
.id_table = id_table,
.num_ports = 1,
@@ -179,7 +175,7 @@
.close = cp210x_close,
.break_ctl = cp210x_break_ctl,
.set_termios = cp210x_set_termios,
- .tiocmget = cp210x_tiocmget,
+ .tiocmget = cp210x_tiocmget,
.tiocmset = cp210x_tiocmset,
.attach = cp210x_startup,
.release = cp210x_release,
@@ -281,7 +277,7 @@
int result, i, length;
/* Number of integers required to contain the array */
- length = (((size - 1) | 3) + 1)/4;
+ length = (((size - 1) | 3) + 1) / 4;
buf = kcalloc(length, sizeof(__le32), GFP_KERNEL);
if (!buf) {
@@ -328,12 +324,11 @@
int result, i, length;
/* Number of integers required to contain the array */
- length = (((size - 1) | 3) + 1)/4;
+ length = (((size - 1) | 3) + 1) / 4;
buf = kmalloc(length * sizeof(__le32), GFP_KERNEL);
if (!buf) {
- dev_err(&port->dev, "%s - out of memory.\n",
- __func__);
+ dev_err(&port->dev, "%s - out of memory.\n", __func__);
return -ENOMEM;
}
@@ -384,7 +379,8 @@
* cp210x_quantise_baudrate
* Quantises the baud rate as per AN205 Table 1
*/
-static unsigned int cp210x_quantise_baudrate(unsigned int baud) {
+static unsigned int cp210x_quantise_baudrate(unsigned int baud)
+{
if (baud <= 300)
baud = 300;
else if (baud <= 600) baud = 600;
@@ -467,9 +463,7 @@
cp210x_get_termios_port(tty->driver_data,
&tty->termios.c_cflag, &baud);
tty_encode_baud_rate(tty, baud, baud);
- }
-
- else {
+ } else {
unsigned int cflag;
cflag = 0;
cp210x_get_termios_port(port, &cflag, &baud);
@@ -693,8 +687,8 @@
break;*/
default:
dev_dbg(dev, "cp210x driver does not support the number of bits requested, using 8 bit mode\n");
- bits |= BITS_DATA_8;
- break;
+ bits |= BITS_DATA_8;
+ break;
}
if (cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2))
dev_dbg(dev, "Number of data bits requested not supported by device\n");
@@ -767,7 +761,7 @@
}
-static int cp210x_tiocmset (struct tty_struct *tty,
+static int cp210x_tiocmset(struct tty_struct *tty,
unsigned int set, unsigned int clear)
{
struct usb_serial_port *port = tty->driver_data;
@@ -809,7 +803,7 @@
cp210x_tiocmset_port(p, 0, TIOCM_DTR|TIOCM_RTS);
}
-static int cp210x_tiocmget (struct tty_struct *tty)
+static int cp210x_tiocmget(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
unsigned int control;
@@ -829,7 +823,7 @@
return result;
}
-static void cp210x_break_ctl (struct tty_struct *tty, int break_state)
+static void cp210x_break_ctl(struct tty_struct *tty, int break_state)
{
struct usb_serial_port *port = tty->driver_data;
unsigned int state;
@@ -874,5 +868,4 @@
module_usb_serial_driver(serial_drivers, id_table);
MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_VERSION(DRIVER_VERSION);
MODULE_LICENSE("GPL");
diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c
index 4ee77dc..69a4fa1 100644
--- a/drivers/usb/serial/cyberjack.c
+++ b/drivers/usb/serial/cyberjack.c
@@ -43,10 +43,6 @@
#define CYBERJACK_LOCAL_BUF_SIZE 32
-/*
- * Version Information
- */
-#define DRIVER_VERSION "v1.01"
#define DRIVER_AUTHOR "Matthias Bruestle"
#define DRIVER_DESC "REINER SCT cyberJack pinpad/e-com USB Chipcard Reader Driver"
@@ -441,5 +437,4 @@
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_VERSION(DRIVER_VERSION);
MODULE_LICENSE("GPL");
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index f0da127..fd8c35f 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -50,10 +50,6 @@
static int interval;
static bool unstable_bauds;
-/*
- * Version Information
- */
-#define DRIVER_VERSION "v1.10"
#define DRIVER_AUTHOR "Lonnie Mendez <dignome@gmail.com>, Neil Whelchel <koyama@firstlight.net>"
#define DRIVER_DESC "Cypress USB to Serial Driver"
@@ -1303,7 +1299,6 @@
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_VERSION(DRIVER_VERSION);
MODULE_LICENSE("GPL");
module_param(stats, bool, S_IRUGO | S_IWUSR);
diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c
index b50fa1c..45d4af6 100644
--- a/drivers/usb/serial/digi_acceleport.c
+++ b/drivers/usb/serial/digi_acceleport.c
@@ -32,10 +32,6 @@
/* Defines */
-/*
- * Version Information
- */
-#define DRIVER_VERSION "v1.80.1.2"
#define DRIVER_AUTHOR "Peter Berger <pberger@brimson.com>, Al Borchers <borchers@steinerpoint.com>"
#define DRIVER_DESC "Digi AccelePort USB-2/USB-4 Serial Converter driver"
diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c
index 43ede4a..0f65861 100644
--- a/drivers/usb/serial/empeg.c
+++ b/drivers/usb/serial/empeg.c
@@ -28,10 +28,6 @@
#include <linux/usb.h>
#include <linux/usb/serial.h>
-/*
- * Version Information
- */
-#define DRIVER_VERSION "v1.3"
#define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Gary Brubaker <xavyer@ix.netcom.com>"
#define DRIVER_DESC "USB Empeg Mark I/II Driver"
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index be84587..0a373b3 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -73,7 +73,6 @@
char prev_status; /* Used for TIOCMIWAIT */
bool dev_gone; /* Used to abort TIOCMIWAIT */
char transmit_empty; /* If transmitter is empty or not */
- struct usb_serial_port *port;
__u16 interface; /* FT2232C, FT2232H or FT4232H port interface
(0 for FT232/245) */
@@ -192,6 +191,7 @@
{ USB_DEVICE(FTDI_VID, FTDI_OPENDCC_THROTTLE_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_OPENDCC_GATEWAY_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_OPENDCC_GBM_PID) },
+ { USB_DEVICE(NEWPORT_VID, NEWPORT_AGILIS_PID) },
{ USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_IOBOARD_PID) },
{ USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_MINI_IOBOARD_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SPROG_II) },
@@ -923,6 +923,9 @@
static int ftdi_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg);
static void ftdi_break_ctl(struct tty_struct *tty, int break_state);
+static int ftdi_chars_in_buffer(struct tty_struct *tty);
+static int ftdi_get_modem_status(struct tty_struct *tty,
+ unsigned char status[2]);
static unsigned short int ftdi_232am_baud_base_to_divisor(int baud, int base);
static unsigned short int ftdi_232am_baud_to_divisor(int baud);
@@ -957,6 +960,7 @@
.ioctl = ftdi_ioctl,
.set_termios = ftdi_set_termios,
.break_ctl = ftdi_break_ctl,
+ .chars_in_buffer = ftdi_chars_in_buffer,
};
static struct usb_serial_driver * const serial_drivers[] = {
@@ -1090,6 +1094,7 @@
__func__,
(set & TIOCM_DTR) ? "HIGH" : (clear & TIOCM_DTR) ? "LOW" : "unchanged",
(set & TIOCM_RTS) ? "HIGH" : (clear & TIOCM_RTS) ? "LOW" : "unchanged");
+ rv = usb_translate_errors(rv);
} else {
dev_dbg(dev, "%s - DTR %s, RTS %s\n", __func__,
(set & TIOCM_DTR) ? "HIGH" : (clear & TIOCM_DTR) ? "LOW" : "unchanged",
@@ -1682,7 +1687,6 @@
kref_init(&priv->kref);
mutex_init(&priv->cfg_lock);
- memset(&priv->icount, 0x00, sizeof(priv->icount));
init_waitqueue_head(&priv->delta_msr_wait);
priv->flags = ASYNC_LOW_LATENCY;
@@ -1691,7 +1695,6 @@
if (quirk && quirk->port_probe)
quirk->port_probe(priv);
- priv->port = port;
usb_set_serial_port_data(port, priv);
ftdi_determine_type(port);
@@ -1781,7 +1784,7 @@
struct usb_device *udev = serial->dev;
if ((udev->manufacturer && !strcmp(udev->manufacturer, "CALAO Systems")) ||
- (udev->product && !strcmp(udev->product, "BeagleBone/XDS100")))
+ (udev->product && !strcmp(udev->product, "BeagleBone/XDS100V2")))
return ftdi_jtag_probe(serial);
return 0;
@@ -2089,6 +2092,29 @@
}
+static int ftdi_chars_in_buffer(struct tty_struct *tty)
+{
+ struct usb_serial_port *port = tty->driver_data;
+ int chars;
+ unsigned char buf[2];
+ int ret;
+
+ chars = usb_serial_generic_chars_in_buffer(tty);
+ if (chars)
+ goto out;
+
+ /* Check if hardware buffer is empty. */
+ ret = ftdi_get_modem_status(tty, buf);
+ if (ret == 2) {
+ if (!(buf[1] & FTDI_RS_TEMT))
+ chars = 1;
+ }
+out:
+ dev_dbg(&port->dev, "%s - %d\n", __func__, chars);
+
+ return chars;
+}
+
/* old_termios contains the original termios settings and tty->termios contains
* the new setting to be used
* WARNING: set_termios calls this with old_termios in kernel space
@@ -2272,7 +2298,14 @@
}
}
-static int ftdi_tiocmget(struct tty_struct *tty)
+/*
+ * Get modem-control status.
+ *
+ * Returns the number of status bytes retrieved (device dependant), or
+ * negative error code.
+ */
+static int ftdi_get_modem_status(struct tty_struct *tty,
+ unsigned char status[2])
{
struct usb_serial_port *port = tty->driver_data;
struct ftdi_private *priv = usb_get_serial_port_data(port);
@@ -2312,16 +2345,43 @@
FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE,
0, priv->interface,
buf, len, WDR_TIMEOUT);
- if (ret < 0)
+ if (ret < 0) {
+ dev_err(&port->dev, "failed to get modem status: %d\n", ret);
+ ret = usb_translate_errors(ret);
goto out;
+ }
- ret = (buf[0] & FTDI_SIO_DSR_MASK ? TIOCM_DSR : 0) |
- (buf[0] & FTDI_SIO_CTS_MASK ? TIOCM_CTS : 0) |
- (buf[0] & FTDI_SIO_RI_MASK ? TIOCM_RI : 0) |
- (buf[0] & FTDI_SIO_RLSD_MASK ? TIOCM_CD : 0) |
- priv->last_dtr_rts;
+ status[0] = buf[0];
+ if (ret > 1)
+ status[1] = buf[1];
+ else
+ status[1] = 0;
+
+ dev_dbg(&port->dev, "%s - 0x%02x%02x\n", __func__, status[0],
+ status[1]);
out:
kfree(buf);
+
+ return ret;
+}
+
+static int ftdi_tiocmget(struct tty_struct *tty)
+{
+ struct usb_serial_port *port = tty->driver_data;
+ struct ftdi_private *priv = usb_get_serial_port_data(port);
+ unsigned char buf[2];
+ int ret;
+
+ ret = ftdi_get_modem_status(tty, buf);
+ if (ret < 0)
+ return ret;
+
+ ret = (buf[0] & FTDI_SIO_DSR_MASK ? TIOCM_DSR : 0) |
+ (buf[0] & FTDI_SIO_CTS_MASK ? TIOCM_CTS : 0) |
+ (buf[0] & FTDI_SIO_RI_MASK ? TIOCM_RI : 0) |
+ (buf[0] & FTDI_SIO_RLSD_MASK ? TIOCM_CD : 0) |
+ priv->last_dtr_rts;
+
return ret;
}
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index 57c12ef..049b6e7 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -752,6 +752,12 @@
#define TTI_VID 0x103E /* Vendor Id */
#define TTI_QL355P_PID 0x03E8 /* TTi QL355P power supply */
+/*
+ * Newport Cooperation (www.newport.com)
+ */
+#define NEWPORT_VID 0x104D
+#define NEWPORT_AGILIS_PID 0x3000
+
/* Interbiometrics USB I/O Board */
/* Developed for Interbiometrics by Rudolf Gugler */
#define INTERBIOMETRICS_VID 0x1209
diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c
index 2966121..2ea70a6 100644
--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -262,6 +262,7 @@
dev_dbg(&port->dev, "%s - returns %d\n", __func__, chars);
return chars;
}
+EXPORT_SYMBOL_GPL(usb_serial_generic_chars_in_buffer);
static int usb_serial_generic_submit_read_urb(struct usb_serial_port *port,
int index, gfp_t mem_flags)
diff --git a/drivers/usb/serial/hp4x.c b/drivers/usb/serial/hp4x.c
index 0bbaf21..2cba60d 100644
--- a/drivers/usb/serial/hp4x.c
+++ b/drivers/usb/serial/hp4x.c
@@ -20,10 +20,6 @@
#include <linux/usb.h>
#include <linux/usb/serial.h>
-/*
- * Version Information
- */
-#define DRIVER_VERSION "v1.00"
#define DRIVER_DESC "HP4x (48/49) Generic Serial driver"
#define HP_VENDOR_ID 0x03f0
@@ -52,5 +48,4 @@
module_usb_serial_driver(serial_drivers, id_table);
MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_VERSION(DRIVER_VERSION);
MODULE_LICENSE("GPL");
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index 5acc0d1..7b770c7 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -51,10 +51,6 @@
#include "io_ionsp.h" /* info for the iosp messages */
#include "io_16654.h" /* 16654 UART defines */
-/*
- * Version Information
- */
-#define DRIVER_VERSION "v2.7"
#define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com> and David Iacovelli"
#define DRIVER_DESC "Edgeport USB Serial Driver"
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index 60023c2..58184f3 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -40,10 +40,6 @@
#include "io_usbvend.h"
#include "io_ti.h"
-/*
- * Version Information
- */
-#define DRIVER_VERSION "v0.7mode043006"
#define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com> and David Iacovelli"
#define DRIVER_DESC "Edgeport USB Serial Driver"
diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c
index 1068bf2..76c9a84 100644
--- a/drivers/usb/serial/ipaq.c
+++ b/drivers/usb/serial/ipaq.c
@@ -25,11 +25,6 @@
#define KP_RETRIES 100
-/*
- * Version Information
- */
-
-#define DRIVER_VERSION "v1.0"
#define DRIVER_AUTHOR "Ganesh Varadarajan <ganesh@veritas.com>"
#define DRIVER_DESC "USB PocketPC PDA driver"
diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c
index 4264821..155eab1 100644
--- a/drivers/usb/serial/ipw.c
+++ b/drivers/usb/serial/ipw.c
@@ -49,10 +49,6 @@
#include <linux/uaccess.h>
#include "usb-wwan.h"
-/*
- * Version Information
- */
-#define DRIVER_VERSION "v0.4"
#define DRIVER_AUTHOR "Roelf Diedericks"
#define DRIVER_DESC "IPWireless tty driver"
diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c
index cd5533e..1e1fbed 100644
--- a/drivers/usb/serial/iuu_phoenix.c
+++ b/drivers/usb/serial/iuu_phoenix.c
@@ -32,10 +32,6 @@
#include "iuu_phoenix.h"
#include <linux/random.h>
-/*
- * Version Information
- */
-#define DRIVER_VERSION "v0.12"
#define DRIVER_DESC "Infinity USB Unlimited Phoenix driver"
static const struct usb_device_id id_table[] = {
@@ -1164,7 +1160,7 @@
struct iuu_private *priv = usb_get_serial_port_data(port);
unsigned long v;
- if (strict_strtoul(buf, 10, &v)) {
+ if (kstrtoul(buf, 10, &v)) {
dev_err(dev, "%s - vcc_mode: %s is not a unsigned long\n",
__func__, buf);
goto fail_store_vcc_mode;
@@ -1232,8 +1228,6 @@
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");
-MODULE_VERSION(DRIVER_VERSION);
-
module_param(xmas, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(xmas, "Xmas colors enabled or not");
diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
index cff8dd5..97bc49f 100644
--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -44,10 +44,6 @@
#include <linux/usb/ezusb.h>
#include "keyspan.h"
-/*
- * Version Information
- */
-#define DRIVER_VERSION "v1.1.5"
#define DRIVER_AUTHOR "Hugh Blemings <hugh@misc.nu"
#define DRIVER_DESC "Keyspan USB to Serial Converter Driver"
diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c
index bb87e29..41b0109 100644
--- a/drivers/usb/serial/keyspan_pda.c
+++ b/drivers/usb/serial/keyspan_pda.c
@@ -42,10 +42,6 @@
#undef XIRCOM
#endif
-/*
- * Version Information
- */
-#define DRIVER_VERSION "v1.1"
#define DRIVER_AUTHOR "Brian Warner <warner@lothar.com>"
#define DRIVER_DESC "USB Keyspan PDA Converter driver"
diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c
index 1f45178..fc9e14a 100644
--- a/drivers/usb/serial/kl5kusb105.c
+++ b/drivers/usb/serial/kl5kusb105.c
@@ -49,10 +49,6 @@
#include <linux/usb/serial.h>
#include "kl5kusb105.h"
-/*
- * Version Information
- */
-#define DRIVER_VERSION "v0.4"
#define DRIVER_AUTHOR "Utz-Uwe Haus <haus@uuhaus.de>, Johan Hovold <jhovold@gmail.com>"
#define DRIVER_DESC "KLSI KL5KUSB105 chipset USB->Serial Converter driver"
diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c
index c9ca7a5..b747ba6 100644
--- a/drivers/usb/serial/kobil_sct.c
+++ b/drivers/usb/serial/kobil_sct.c
@@ -38,8 +38,6 @@
#include <linux/ioctl.h>
#include "kobil_sct.h"
-/* Version Information */
-#define DRIVER_VERSION "21/05/2004"
#define DRIVER_AUTHOR "KOBIL Systems GmbH - http://www.kobil.com"
#define DRIVER_DESC "KOBIL USB Smart Card Terminal Driver (experimental)"
diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c
index 8a20810..b691175 100644
--- a/drivers/usb/serial/mct_u232.c
+++ b/drivers/usb/serial/mct_u232.c
@@ -38,10 +38,6 @@
#include <linux/ioctl.h>
#include "mct_u232.h"
-/*
- * Version Information
- */
-#define DRIVER_VERSION "z2.1" /* Linux in-kernel version */
#define DRIVER_AUTHOR "Wolfgang Grandegger <wolfgang@ces.ch>"
#define DRIVER_DESC "Magic Control Technology USB-RS232 converter driver"
diff --git a/drivers/usb/serial/metro-usb.c b/drivers/usb/serial/metro-usb.c
index 6f29c74..3d25844 100644
--- a/drivers/usb/serial/metro-usb.c
+++ b/drivers/usb/serial/metro-usb.c
@@ -20,8 +20,6 @@
#include <linux/uaccess.h>
#include <linux/usb/serial.h>
-/* Version Information */
-#define DRIVER_VERSION "v1.2.0.0"
#define DRIVER_DESC "Metrologic Instruments Inc. - USB-POS driver"
/* Product information. */
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index 7526742..f57a6b1 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -36,10 +36,6 @@
#include <linux/uaccess.h>
#include <linux/parport.h>
-/*
- * Version Information
- */
-#define DRIVER_VERSION "2.1"
#define DRIVER_AUTHOR "Aspire Communications pvt Ltd."
#define DRIVER_DESC "Moschip USB Serial Driver"
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 1cf3375..66d9e08 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -35,10 +35,6 @@
#include <linux/usb/serial.h>
#include <linux/uaccess.h>
-/*
- * Version Information
- */
-#define DRIVER_VERSION "1.3.2"
#define DRIVER_DESC "Moschip 7840/7820 USB Serial Driver"
/*
diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c
index 9ab73d2..7818af9 100644
--- a/drivers/usb/serial/omninet.c
+++ b/drivers/usb/serial/omninet.c
@@ -23,10 +23,6 @@
#include <linux/usb.h>
#include <linux/usb/serial.h>
-/*
- * Version Information
- */
-#define DRIVER_VERSION "v1.1"
#define DRIVER_AUTHOR "Alessandro Zummo"
#define DRIVER_DESC "USB ZyXEL omni.net LCD PLUS Driver"
diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c
index 6aba731..c6bfb83 100644
--- a/drivers/usb/serial/opticon.c
+++ b/drivers/usb/serial/opticon.c
@@ -1,6 +1,7 @@
/*
* Opticon USB barcode to serial driver
*
+ * Copyright (C) 2011 - 2012 Johan Hovold <jhovold@gmail.com>
* Copyright (C) 2011 Martin Jansen <martin.jansen@opticon.com>
* Copyright (C) 2008 - 2009 Greg Kroah-Hartman <gregkh@suse.de>
* Copyright (C) 2008 - 2009 Novell Inc.
@@ -40,114 +41,70 @@
/* This structure holds all of the individual device information */
struct opticon_private {
- struct usb_device *udev;
- struct usb_serial *serial;
- struct usb_serial_port *port;
- unsigned char *bulk_in_buffer;
- struct urb *bulk_read_urb;
- int buffer_size;
- u8 bulk_address;
spinlock_t lock; /* protects the following flags */
- bool throttled;
- bool actually_throttled;
bool rts;
bool cts;
int outstanding_urbs;
};
-
-static void opticon_read_bulk_callback(struct urb *urb)
+static void opticon_process_data_packet(struct usb_serial_port *port,
+ const unsigned char *buf, size_t len)
{
- struct opticon_private *priv = urb->context;
- unsigned char *data = urb->transfer_buffer;
- struct usb_serial_port *port = priv->port;
- int status = urb->status;
struct tty_struct *tty;
- int result;
- int data_length;
+
+ tty = tty_port_tty_get(&port->port);
+ if (!tty)
+ return;
+
+ tty_insert_flip_string(tty, buf, len);
+ tty_flip_buffer_push(tty);
+ tty_kref_put(tty);
+}
+
+static void opticon_process_status_packet(struct usb_serial_port *port,
+ const unsigned char *buf, size_t len)
+{
+ struct opticon_private *priv = usb_get_serial_port_data(port);
unsigned long flags;
- switch (status) {
- case 0:
- /* success */
- break;
- case -ECONNRESET:
- case -ENOENT:
- case -ESHUTDOWN:
- /* this urb is terminated, clean up */
- dev_dbg(&priv->udev->dev, "%s - urb shutting down with status: %d\n",
- __func__, status);
+ spin_lock_irqsave(&priv->lock, flags);
+ if (buf[0] == 0x00)
+ priv->cts = false;
+ else
+ priv->cts = true;
+ spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+static void opticon_process_read_urb(struct urb *urb)
+{
+ struct usb_serial_port *port = urb->context;
+ const unsigned char *hdr = urb->transfer_buffer;
+ const unsigned char *data = hdr + 2;
+ size_t data_len = urb->actual_length - 2;
+
+ if (urb->actual_length <= 2) {
+ dev_dbg(&port->dev, "malformed packet received: %d bytes\n",
+ urb->actual_length);
return;
- default:
- dev_dbg(&priv->udev->dev, "%s - nonzero urb status received: %d\n",
- __func__, status);
- goto exit;
}
-
- usb_serial_debug_data(&port->dev, __func__, urb->actual_length, data);
-
- if (urb->actual_length > 2) {
- data_length = urb->actual_length - 2;
-
- /*
- * Data from the device comes with a 2 byte header:
- *
- * <0x00><0x00>data...
- * This is real data to be sent to the tty layer
- * <0x00><0x01)level
- * This is a CTS level change, the third byte is the CTS
- * value (0 for low, 1 for high).
- */
- if ((data[0] == 0x00) && (data[1] == 0x00)) {
- /* real data, send it to the tty layer */
- tty = tty_port_tty_get(&port->port);
- if (tty) {
- tty_insert_flip_string(tty, data + 2,
- data_length);
- tty_flip_buffer_push(tty);
- tty_kref_put(tty);
- }
- } else {
- if ((data[0] == 0x00) && (data[1] == 0x01)) {
- spin_lock_irqsave(&priv->lock, flags);
- /* CTS status information package */
- if (data[2] == 0x00)
- priv->cts = false;
- else
- priv->cts = true;
- spin_unlock_irqrestore(&priv->lock, flags);
- } else {
- dev_dbg(&priv->udev->dev,
- "Unknown data packet received from the device:"
- " %2x %2x\n",
- data[0], data[1]);
- }
- }
+ /*
+ * Data from the device comes with a 2 byte header:
+ *
+ * <0x00><0x00>data...
+ * This is real data to be sent to the tty layer
+ * <0x00><0x01>level
+ * This is a CTS level change, the third byte is the CTS
+ * value (0 for low, 1 for high).
+ */
+ if ((hdr[0] == 0x00) && (hdr[1] == 0x00)) {
+ opticon_process_data_packet(port, data, data_len);
+ } else if ((hdr[0] == 0x00) && (hdr[1] == 0x01)) {
+ opticon_process_status_packet(port, data, data_len);
} else {
- dev_dbg(&priv->udev->dev,
- "Improper amount of data received from the device, "
- "%d bytes", urb->actual_length);
+ dev_dbg(&port->dev, "unknown packet received: %02x %02x\n",
+ hdr[0], hdr[1]);
}
-
-exit:
- spin_lock(&priv->lock);
-
- /* Continue trying to always read if we should */
- if (!priv->throttled) {
- usb_fill_bulk_urb(priv->bulk_read_urb, priv->udev,
- usb_rcvbulkpipe(priv->udev,
- priv->bulk_address),
- priv->bulk_in_buffer, priv->buffer_size,
- opticon_read_bulk_callback, priv);
- result = usb_submit_urb(priv->bulk_read_urb, GFP_ATOMIC);
- if (result)
- dev_err(&port->dev,
- "%s - failed resubmitting read urb, error %d\n",
- __func__, result);
- } else
- priv->actually_throttled = true;
- spin_unlock(&priv->lock);
}
static int send_control_msg(struct usb_serial_port *port, u8 requesttype,
@@ -175,52 +132,35 @@
static int opticon_open(struct tty_struct *tty, struct usb_serial_port *port)
{
- struct opticon_private *priv = usb_get_serial_data(port->serial);
+ struct opticon_private *priv = usb_get_serial_port_data(port);
unsigned long flags;
- int result = 0;
+ int res;
spin_lock_irqsave(&priv->lock, flags);
- priv->throttled = false;
- priv->actually_throttled = false;
- priv->port = port;
priv->rts = false;
spin_unlock_irqrestore(&priv->lock, flags);
/* Clear RTS line */
send_control_msg(port, CONTROL_RTS, 0);
- /* Setup the read URB and start reading from the device */
- usb_fill_bulk_urb(priv->bulk_read_urb, priv->udev,
- usb_rcvbulkpipe(priv->udev,
- priv->bulk_address),
- priv->bulk_in_buffer, priv->buffer_size,
- opticon_read_bulk_callback, priv);
-
/* clear the halt status of the enpoint */
- usb_clear_halt(priv->udev, priv->bulk_read_urb->pipe);
+ usb_clear_halt(port->serial->dev, port->read_urb->pipe);
- result = usb_submit_urb(priv->bulk_read_urb, GFP_KERNEL);
- if (result)
- dev_err(&port->dev,
- "%s - failed resubmitting read urb, error %d\n",
- __func__, result);
+ res = usb_serial_generic_open(tty, port);
+ if (!res)
+ return res;
+
/* Request CTS line state, sometimes during opening the current
* CTS state can be missed. */
send_control_msg(port, RESEND_CTS_STATE, 1);
- return result;
-}
-static void opticon_close(struct usb_serial_port *port)
-{
- struct opticon_private *priv = usb_get_serial_data(port->serial);
-
- /* shutdown our urbs */
- usb_kill_urb(priv->bulk_read_urb);
+ return res;
}
static void opticon_write_control_callback(struct urb *urb)
{
- struct opticon_private *priv = urb->context;
+ struct usb_serial_port *port = urb->context;
+ struct opticon_private *priv = usb_get_serial_port_data(port);
int status = urb->status;
unsigned long flags;
@@ -231,20 +171,21 @@
kfree(urb->setup_packet);
if (status)
- dev_dbg(&priv->udev->dev, "%s - nonzero write bulk status received: %d\n",
+ dev_dbg(&port->dev,
+ "%s - non-zero urb status received: %d\n",
__func__, status);
spin_lock_irqsave(&priv->lock, flags);
--priv->outstanding_urbs;
spin_unlock_irqrestore(&priv->lock, flags);
- usb_serial_port_softint(priv->port);
+ usb_serial_port_softint(port);
}
static int opticon_write(struct tty_struct *tty, struct usb_serial_port *port,
const unsigned char *buf, int count)
{
- struct opticon_private *priv = usb_get_serial_data(port->serial);
+ struct opticon_private *priv = usb_get_serial_port_data(port);
struct usb_serial *serial = port->serial;
struct urb *urb;
unsigned char *buffer;
@@ -298,7 +239,7 @@
usb_fill_control_urb(urb, serial->dev,
usb_sndctrlpipe(serial->dev, 0),
(unsigned char *)dr, buffer, count,
- opticon_write_control_callback, priv);
+ opticon_write_control_callback, port);
/* send it down the pipe */
status = usb_submit_urb(urb, GFP_ATOMIC);
@@ -331,7 +272,7 @@
static int opticon_write_room(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
- struct opticon_private *priv = usb_get_serial_data(port->serial);
+ struct opticon_private *priv = usb_get_serial_port_data(port);
unsigned long flags;
/*
@@ -350,44 +291,10 @@
return 2048;
}
-static void opticon_throttle(struct tty_struct *tty)
-{
- struct usb_serial_port *port = tty->driver_data;
- struct opticon_private *priv = usb_get_serial_data(port->serial);
- unsigned long flags;
-
- spin_lock_irqsave(&priv->lock, flags);
- priv->throttled = true;
- spin_unlock_irqrestore(&priv->lock, flags);
-}
-
-
-static void opticon_unthrottle(struct tty_struct *tty)
-{
- struct usb_serial_port *port = tty->driver_data;
- struct opticon_private *priv = usb_get_serial_data(port->serial);
- unsigned long flags;
- int result, was_throttled;
-
- spin_lock_irqsave(&priv->lock, flags);
- priv->throttled = false;
- was_throttled = priv->actually_throttled;
- priv->actually_throttled = false;
- spin_unlock_irqrestore(&priv->lock, flags);
-
- if (was_throttled) {
- result = usb_submit_urb(priv->bulk_read_urb, GFP_ATOMIC);
- if (result)
- dev_err(&port->dev,
- "%s - failed submitting read urb, error %d\n",
- __func__, result);
- }
-}
-
static int opticon_tiocmget(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
- struct opticon_private *priv = usb_get_serial_data(port->serial);
+ struct opticon_private *priv = usb_get_serial_port_data(port);
unsigned long flags;
int result = 0;
@@ -407,7 +314,7 @@
{
struct usb_serial_port *port = tty->driver_data;
struct usb_serial *serial = port->serial;
- struct opticon_private *priv = usb_get_serial_data(port->serial);
+ struct opticon_private *priv = usb_get_serial_port_data(port);
unsigned long flags;
bool rts;
bool changed = false;
@@ -438,7 +345,7 @@
return ret;
}
-static int get_serial_info(struct opticon_private *priv,
+static int get_serial_info(struct usb_serial_port *port,
struct serial_struct __user *serial)
{
struct serial_struct tmp;
@@ -450,7 +357,7 @@
/* fake emulate a 16550 uart to make userspace code happy */
tmp.type = PORT_16550A;
- tmp.line = priv->serial->minor;
+ tmp.line = port->serial->minor;
tmp.port = 0;
tmp.irq = 0;
tmp.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ;
@@ -468,13 +375,12 @@
unsigned int cmd, unsigned long arg)
{
struct usb_serial_port *port = tty->driver_data;
- struct opticon_private *priv = usb_get_serial_data(port->serial);
dev_dbg(&port->dev, "%s - port %d, cmd = 0x%x\n", __func__, port->number, cmd);
switch (cmd) {
case TIOCGSERIAL:
- return get_serial_info(priv,
+ return get_serial_info(port,
(struct serial_struct __user *)arg);
}
@@ -483,106 +389,36 @@
static int opticon_startup(struct usb_serial *serial)
{
+ if (!serial->num_bulk_in) {
+ dev_err(&serial->dev->dev, "no bulk in endpoint\n");
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static int opticon_port_probe(struct usb_serial_port *port)
+{
struct opticon_private *priv;
- struct usb_host_interface *intf;
- int i;
- int retval = -ENOMEM;
- bool bulk_in_found = false;
- /* create our private serial structure */
priv = kzalloc(sizeof(*priv), GFP_KERNEL);
- if (priv == NULL) {
- dev_err(&serial->dev->dev, "%s - Out of memory\n", __func__);
+ if (!priv)
return -ENOMEM;
- }
+
spin_lock_init(&priv->lock);
- priv->serial = serial;
- priv->port = serial->port[0];
- priv->udev = serial->dev;
- priv->outstanding_urbs = 0; /* Init the outstanding urbs */
- /* find our bulk endpoint */
- intf = serial->interface->altsetting;
- for (i = 0; i < intf->desc.bNumEndpoints; ++i) {
- struct usb_endpoint_descriptor *endpoint;
+ usb_set_serial_port_data(port, priv);
- endpoint = &intf->endpoint[i].desc;
- if (!usb_endpoint_is_bulk_in(endpoint))
- continue;
-
- priv->bulk_read_urb = usb_alloc_urb(0, GFP_KERNEL);
- if (!priv->bulk_read_urb) {
- dev_err(&priv->udev->dev, "out of memory\n");
- goto error;
- }
-
- priv->buffer_size = usb_endpoint_maxp(endpoint) * 2;
- priv->bulk_in_buffer = kmalloc(priv->buffer_size, GFP_KERNEL);
- if (!priv->bulk_in_buffer) {
- dev_err(&priv->udev->dev, "out of memory\n");
- goto error;
- }
-
- priv->bulk_address = endpoint->bEndpointAddress;
-
- bulk_in_found = true;
- break;
- }
-
- if (!bulk_in_found) {
- dev_err(&priv->udev->dev,
- "Error - the proper endpoints were not found!\n");
- goto error;
- }
-
- usb_set_serial_data(serial, priv);
- return 0;
-
-error:
- usb_free_urb(priv->bulk_read_urb);
- kfree(priv->bulk_in_buffer);
- kfree(priv);
- return retval;
-}
-
-static void opticon_disconnect(struct usb_serial *serial)
-{
- struct opticon_private *priv = usb_get_serial_data(serial);
-
- usb_kill_urb(priv->bulk_read_urb);
- usb_free_urb(priv->bulk_read_urb);
-}
-
-static void opticon_release(struct usb_serial *serial)
-{
- struct opticon_private *priv = usb_get_serial_data(serial);
-
- kfree(priv->bulk_in_buffer);
- kfree(priv);
-}
-
-static int opticon_suspend(struct usb_serial *serial, pm_message_t message)
-{
- struct opticon_private *priv = usb_get_serial_data(serial);
-
- usb_kill_urb(priv->bulk_read_urb);
return 0;
}
-static int opticon_resume(struct usb_serial *serial)
+static int opticon_port_remove(struct usb_serial_port *port)
{
- struct opticon_private *priv = usb_get_serial_data(serial);
- struct usb_serial_port *port = serial->port[0];
- int result;
+ struct opticon_private *priv = usb_get_serial_port_data(port);
- mutex_lock(&port->port.mutex);
- /* This is protected by the port mutex against close/open */
- if (test_bit(ASYNCB_INITIALIZED, &port->port.flags))
- result = usb_submit_urb(priv->bulk_read_urb, GFP_NOIO);
- else
- result = 0;
- mutex_unlock(&port->port.mutex);
- return result;
+ kfree(priv);
+
+ return 0;
}
static struct usb_serial_driver opticon_device = {
@@ -592,20 +428,19 @@
},
.id_table = id_table,
.num_ports = 1,
+ .bulk_in_size = 256,
.attach = opticon_startup,
+ .port_probe = opticon_port_probe,
+ .port_remove = opticon_port_remove,
.open = opticon_open,
- .close = opticon_close,
.write = opticon_write,
.write_room = opticon_write_room,
- .disconnect = opticon_disconnect,
- .release = opticon_release,
- .throttle = opticon_throttle,
- .unthrottle = opticon_unthrottle,
+ .throttle = usb_serial_generic_throttle,
+ .unthrottle = usb_serial_generic_unthrottle,
.ioctl = opticon_ioctl,
.tiocmget = opticon_tiocmget,
.tiocmset = opticon_tiocmset,
- .suspend = opticon_suspend,
- .resume = opticon_resume,
+ .process_read_urb = opticon_process_read_urb,
};
static struct usb_serial_driver * const serial_drivers[] = {
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index edc64bb..e6f87b7 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -28,7 +28,6 @@
device features.
*/
-#define DRIVER_VERSION "v0.7.2"
#define DRIVER_AUTHOR "Matthias Urlichs <smurf@smurf.noris.de>"
#define DRIVER_DESC "USB Driver for GSM modems"
@@ -81,6 +80,7 @@
#define OPTION_PRODUCT_GTM380_MODEM 0x7201
#define HUAWEI_VENDOR_ID 0x12D1
+#define HUAWEI_PRODUCT_E173 0x140C
#define HUAWEI_PRODUCT_K4505 0x1464
#define HUAWEI_PRODUCT_K3765 0x1465
#define HUAWEI_PRODUCT_K4605 0x14C6
@@ -553,6 +553,8 @@
{ USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_GLX) },
{ USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_GKE) },
{ USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_GLE) },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E173, 0xff, 0xff, 0xff),
+ .driver_info = (kernel_ulong_t) &net_intf1_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4505, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3765, 0xff, 0xff, 0xff),
@@ -741,23 +743,23 @@
{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_620UW) },
{ USB_DEVICE(AXESSTEL_VENDOR_ID, AXESSTEL_PRODUCT_MV110H) },
{ USB_DEVICE(YISO_VENDOR_ID, YISO_PRODUCT_U893) },
- { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_1) },
- { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_2) },
- { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1004) },
- { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1005) },
- { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1006) },
- { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1007) },
- { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1008) },
- { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1009) },
- { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_100A) },
- { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_100B) },
- { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_100C) },
- { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_100D) },
- { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_100E) },
- { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_100F) },
- { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1010) },
- { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1011) },
- { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1012) },
+ { USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_1, 0xff) },
+ { USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_2, 0xff) },
+ { USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1004, 0xff) },
+ { USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1005, 0xff) },
+ { USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1006, 0xff) },
+ { USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1007, 0xff) },
+ { USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1008, 0xff) },
+ { USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1009, 0xff) },
+ { USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_100A, 0xff) },
+ { USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_100B, 0xff) },
+ { USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_100C, 0xff) },
+ { USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_100D, 0xff) },
+ { USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_100E, 0xff) },
+ { USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_100F, 0xff) },
+ { USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1010, 0xff) },
+ { USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1011, 0xff) },
+ { USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1012, 0xff) },
{ USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC650) },
{ USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC680) },
{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6000)}, /* ZTE AC8700 */
@@ -884,6 +886,10 @@
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0126, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t)&net_intf5_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0128, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0135, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0136, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0137, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0139, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0142, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0143, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0144, 0xff, 0xff, 0xff) },
@@ -904,20 +910,34 @@
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0165, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0167, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0189, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0191, 0xff, 0xff, 0xff), /* ZTE EuFi890 */
.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0196, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0197, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0199, 0xff, 0xff, 0xff), /* ZTE MF820S */
.driver_info = (kernel_ulong_t)&net_intf1_blacklist },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0200, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0201, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0254, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0257, 0xff, 0xff, 0xff), /* ZTE MF821 */
.driver_info = (kernel_ulong_t)&net_intf3_blacklist },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0265, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0284, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0317, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0326, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0330, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0395, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0414, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0417, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1008, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1010, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1012, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1018, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1021, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t)&net_intf2_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1057, 0xff, 0xff, 0xff) },
@@ -1097,6 +1117,10 @@
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1298, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1299, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1300, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1301, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1302, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1303, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1333, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1401, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t)&net_intf2_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1402, 0xff, 0xff, 0xff),
@@ -1174,22 +1198,22 @@
{ USB_DEVICE(LONGCHEER_VENDOR_ID, ZOOM_PRODUCT_4597) },
{ USB_DEVICE(HAIER_VENDOR_ID, HAIER_PRODUCT_CE100) },
/* Pirelli */
- { USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_C100_1)},
- { USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_C100_2)},
- { USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_1004)},
- { USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_1005)},
- { USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_1006)},
- { USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_1007)},
- { USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_1008)},
- { USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_1009)},
- { USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_100A)},
- { USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_100B) },
- { USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_100C) },
- { USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_100D) },
- { USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_100E) },
- { USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_100F) },
- { USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_1011)},
- { USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_1012)},
+ { USB_DEVICE_INTERFACE_CLASS(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_C100_1, 0xff) },
+ { USB_DEVICE_INTERFACE_CLASS(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_C100_2, 0xff) },
+ { USB_DEVICE_INTERFACE_CLASS(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_1004, 0xff) },
+ { USB_DEVICE_INTERFACE_CLASS(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_1005, 0xff) },
+ { USB_DEVICE_INTERFACE_CLASS(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_1006, 0xff) },
+ { USB_DEVICE_INTERFACE_CLASS(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_1007, 0xff) },
+ { USB_DEVICE_INTERFACE_CLASS(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_1008, 0xff) },
+ { USB_DEVICE_INTERFACE_CLASS(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_1009, 0xff) },
+ { USB_DEVICE_INTERFACE_CLASS(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_100A, 0xff) },
+ { USB_DEVICE_INTERFACE_CLASS(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_100B, 0xff) },
+ { USB_DEVICE_INTERFACE_CLASS(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_100C, 0xff) },
+ { USB_DEVICE_INTERFACE_CLASS(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_100D, 0xff) },
+ { USB_DEVICE_INTERFACE_CLASS(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_100E, 0xff) },
+ { USB_DEVICE_INTERFACE_CLASS(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_100F, 0xff) },
+ { USB_DEVICE_INTERFACE_CLASS(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_1011, 0xff) },
+ { USB_DEVICE_INTERFACE_CLASS(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_1012, 0xff) },
/* Cinterion */
{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_EU3_E) },
{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_EU3_P) },
@@ -1350,20 +1374,10 @@
&serial->interface->cur_altsetting->desc;
struct usb_device_descriptor *dev_desc = &serial->dev->descriptor;
- /*
- * D-Link DWM 652 still exposes CD-Rom emulation interface in modem
- * mode.
- */
- if (dev_desc->idVendor == DLINK_VENDOR_ID &&
- dev_desc->idProduct == DLINK_PRODUCT_DWM_652 &&
- iface_desc->bInterfaceClass == 0x08)
+ /* Never bind to the CD-Rom emulation interface */
+ if (iface_desc->bInterfaceClass == 0x08)
return -ENODEV;
- /* Bandrich modem and AT command interface is 0xff */
- if ((dev_desc->idVendor == BANDRICH_VENDOR_ID ||
- dev_desc->idVendor == PIRELLI_VENDOR_ID) &&
- iface_desc->bInterfaceClass != 0xff)
- return -ENODEV;
/*
* Don't bind reserved interfaces (like network ones) which often have
* the same class/subclass/protocol as the serial interfaces. Look at
@@ -1378,9 +1392,9 @@
* Don't bind network interface on Samsung GT-B3730, it is handled by
* a separate module.
*/
- if (dev_desc->idVendor == SAMSUNG_VENDOR_ID &&
- dev_desc->idProduct == SAMSUNG_PRODUCT_GT_B3730 &&
- iface_desc->bInterfaceClass != USB_CLASS_CDC_DATA)
+ if (dev_desc->idVendor == cpu_to_le16(SAMSUNG_VENDOR_ID) &&
+ dev_desc->idProduct == cpu_to_le16(SAMSUNG_PRODUCT_GT_B3730) &&
+ iface_desc->bInterfaceClass != USB_CLASS_CDC_DATA)
return -ENODEV;
/* Store device id so we can use it during attach. */
@@ -1518,5 +1532,4 @@
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_VERSION(DRIVER_VERSION);
MODULE_LICENSE("GPL");
diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c
index cee9a52..d217fd6 100644
--- a/drivers/usb/serial/oti6858.c
+++ b/drivers/usb/serial/oti6858.c
@@ -57,7 +57,6 @@
#define OTI6858_DESCRIPTION \
"Ours Technology Inc. OTi-6858 USB to serial adapter driver"
#define OTI6858_AUTHOR "Tomasz Michal Lukaszewski <FIXME@FIXME>"
-#define OTI6858_VERSION "0.2"
static const struct usb_device_id id_table[] = {
{ USB_DEVICE(OTI6858_VENDOR_ID, OTI6858_PRODUCT_ID) },
@@ -899,5 +898,4 @@
MODULE_DESCRIPTION(OTI6858_DESCRIPTION);
MODULE_AUTHOR(OTI6858_AUTHOR);
-MODULE_VERSION(OTI6858_VERSION);
MODULE_LICENSE("GPL");
diff --git a/drivers/usb/serial/quatech2.c b/drivers/usb/serial/quatech2.c
index ffcfc96..d152be9 100644
--- a/drivers/usb/serial/quatech2.c
+++ b/drivers/usb/serial/quatech2.c
@@ -65,8 +65,6 @@
#define QT2_WRITE_BUFFER_SIZE 512 /* size of write buffer */
#define QT2_WRITE_CONTROL_SIZE 5 /* control bytes used for a write */
-/* Version Information */
-#define DRIVER_VERSION "v0.1"
#define DRIVER_DESC "Quatech 2nd gen USB to Serial Driver"
#define USB_VENDOR_ID_QUATECH 0x061d
diff --git a/drivers/usb/serial/siemens_mpi.c b/drivers/usb/serial/siemens_mpi.c
index e4a1787..a76b1ae5 100644
--- a/drivers/usb/serial/siemens_mpi.c
+++ b/drivers/usb/serial/siemens_mpi.c
@@ -16,8 +16,6 @@
#include <linux/usb.h>
#include <linux/usb/serial.h>
-/* Version Information */
-#define DRIVER_VERSION "Version 0.1 09/26/2005"
#define DRIVER_AUTHOR "Thomas Hergenhahn@web.de http://libnodave.sf.net"
#define DRIVER_DESC "Driver for Siemens USB/MPI adapter"
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index 270860f..af06f2f 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -18,7 +18,7 @@
*/
/* Uncomment to log function calls */
/* #define DEBUG */
-#define DRIVER_VERSION "v.1.7.16"
+
#define DRIVER_AUTHOR "Kevin Lloyd, Elina Pasheva, Matthew Safar, Rory Filer"
#define DRIVER_DESC "USB Driver for Sierra Wireless USB modems"
@@ -1078,7 +1078,6 @@
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_VERSION(DRIVER_VERSION);
MODULE_LICENSE("GPL");
module_param(nmea, bool, S_IRUGO | S_IWUSR);
diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c
index 769c137..a42536a 100644
--- a/drivers/usb/serial/spcp8x5.c
+++ b/drivers/usb/serial/spcp8x5.c
@@ -28,9 +28,6 @@
#include <linux/usb.h>
#include <linux/usb/serial.h>
-
-/* Version Information */
-#define DRIVER_VERSION "v0.10"
#define DRIVER_DESC "SPCP8x5 USB to serial adaptor driver"
#define SPCP8x5_007_VID 0x04FC
@@ -651,5 +648,4 @@
module_usb_serial_driver(serial_drivers, id_table);
MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_VERSION(DRIVER_VERSION);
MODULE_LICENSE("GPL");
diff --git a/drivers/usb/serial/ssu100.c b/drivers/usb/serial/ssu100.c
index 868d1e6..4543ea3 100644
--- a/drivers/usb/serial/ssu100.c
+++ b/drivers/usb/serial/ssu100.c
@@ -46,8 +46,6 @@
#define FULLPWRBIT 0x00000080
#define NEXT_BOARD_POWER_BIT 0x00000004
-/* Version Information */
-#define DRIVER_VERSION "v0.1"
#define DRIVER_DESC "Quatech SSU-100 USB to Serial Driver"
#define USB_VENDOR_ID_QUATECH 0x061d /* Quatech VID */
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 73b8e05..64bda13 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -597,6 +597,7 @@
kfifo_free(&port->write_fifo);
kfree(port->interrupt_in_buffer);
kfree(port->interrupt_out_buffer);
+ tty_port_destroy(&port->port);
kfree(port);
}
diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c
index a3e9c09..01c94aa 100644
--- a/drivers/usb/serial/usb_wwan.c
+++ b/drivers/usb/serial/usb_wwan.c
@@ -19,7 +19,6 @@
- controlling the baud rate doesn't make sense
*/
-#define DRIVER_VERSION "v0.7.2"
#define DRIVER_AUTHOR "Matthias Urlichs <smurf@smurf.noris.de>"
#define DRIVER_DESC "USB Driver for GSM modems"
@@ -710,5 +709,4 @@
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_VERSION(DRIVER_VERSION);
MODULE_LICENSE("GPL");
diff --git a/drivers/usb/serial/vivopay-serial.c b/drivers/usb/serial/vivopay-serial.c
index 0c0aa87..6299526 100644
--- a/drivers/usb/serial/vivopay-serial.c
+++ b/drivers/usb/serial/vivopay-serial.c
@@ -10,8 +10,6 @@
#include <linux/usb.h>
#include <linux/usb/serial.h>
-
-#define DRIVER_VERSION "v1.0"
#define DRIVER_DESC "ViVOpay USB Serial Driver"
#define VIVOPAY_VENDOR_ID 0x1d5f
@@ -42,5 +40,4 @@
MODULE_AUTHOR("Forest Bond <forest.bond@outpostembedded.com>");
MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_VERSION(DRIVER_VERSION);
MODULE_LICENSE("GPL");
diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig
index 0ae7bb6..eab04a6 100644
--- a/drivers/usb/storage/Kconfig
+++ b/drivers/usb/storage/Kconfig
@@ -203,7 +203,7 @@
config USB_UAS
tristate "USB Attached SCSI"
- depends on USB && SCSI
+ depends on USB && SCSI && BROKEN
help
The USB Attached SCSI protocol is supported by some USB
storage devices. It permits higher performance by supporting
diff --git a/drivers/usb/storage/realtek_cr.c b/drivers/usb/storage/realtek_cr.c
index d36446d..ea5f258 100644
--- a/drivers/usb/storage/realtek_cr.c
+++ b/drivers/usb/storage/realtek_cr.c
@@ -455,7 +455,7 @@
u8 buf[16];
retval = rts51x_read_status(us, lun, buf, 16, &(chip->status_len));
- if (retval < 0)
+ if (retval != STATUS_SUCCESS)
return -EIO;
US_DEBUGP("chip->status_len = %d\n", chip->status_len);
diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
index 12aa726..31b3e1a 100644
--- a/drivers/usb/storage/usb.c
+++ b/drivers/usb/storage/usb.c
@@ -925,7 +925,6 @@
host->max_cmd_len = 16;
host->sg_tablesize = usb_stor_sg_tablesize(intf);
*pus = us = host_to_us(host);
- memset(us, 0, sizeof(struct us_data));
mutex_init(&(us->dev_mutex));
us_set_lock_class(&us->dev_mutex, intf);
init_completion(&us->cmnd_ready);
diff --git a/drivers/usb/usb-skeleton.c b/drivers/usb/usb-skeleton.c
index 0616f23..ce310170 100644
--- a/drivers/usb/usb-skeleton.c
+++ b/drivers/usb/usb-skeleton.c
@@ -105,20 +105,15 @@
goto exit;
}
+ retval = usb_autopm_get_interface(interface);
+ if (retval)
+ goto exit;
+
/* increment our usage count for the device */
kref_get(&dev->kref);
- /* lock the device to allow correctly handling errors
- * in resumption */
- mutex_lock(&dev->io_mutex);
-
- retval = usb_autopm_get_interface(interface);
- if (retval)
- goto out_err;
-
/* save our object in the file's private structure */
file->private_data = dev;
- mutex_unlock(&dev->io_mutex);
exit:
return retval;
diff --git a/drivers/usb/wusbcore/devconnect.c b/drivers/usb/wusbcore/devconnect.c
index 231009a..1d36531 100644
--- a/drivers/usb/wusbcore/devconnect.c
+++ b/drivers/usb/wusbcore/devconnect.c
@@ -847,19 +847,6 @@
wusb_dev->wusb_cap_descr = NULL;
};
-static struct usb_wireless_cap_descriptor wusb_cap_descr_default = {
- .bLength = sizeof(wusb_cap_descr_default),
- .bDescriptorType = USB_DT_DEVICE_CAPABILITY,
- .bDevCapabilityType = USB_CAP_TYPE_WIRELESS_USB,
-
- .bmAttributes = USB_WIRELESS_BEACON_NONE,
- .wPHYRates = cpu_to_le16(USB_WIRELESS_PHY_53),
- .bmTFITXPowerInfo = 0,
- .bmFFITXPowerInfo = 0,
- .bmBandGroup = cpu_to_le16(0x0001), /* WUSB1.0[7.4.1] bottom */
- .bReserved = 0
-};
-
/*
* USB stack's device addition Notifier Callback
*
diff --git a/drivers/uwb/Kconfig b/drivers/uwb/Kconfig
index d100f54..2431eed 100644
--- a/drivers/uwb/Kconfig
+++ b/drivers/uwb/Kconfig
@@ -3,8 +3,7 @@
#
menuconfig UWB
- tristate "Ultra Wideband devices (EXPERIMENTAL)"
- depends on EXPERIMENTAL
+ tristate "Ultra Wideband devices"
depends on PCI
default n
help
diff --git a/drivers/uwb/reset.c b/drivers/uwb/reset.c
index 7032285..8b47c9c 100644
--- a/drivers/uwb/reset.c
+++ b/drivers/uwb/reset.c
@@ -97,6 +97,7 @@
neh = uwb_rc_neh_add(rc, cmd, expected_type, expected_event, cb, arg);
if (IS_ERR(neh)) {
result = PTR_ERR(neh);
+ uwb_dev_unlock(&rc->uwb_dev);
goto out;
}
diff --git a/drivers/uwb/umc-bus.c b/drivers/uwb/umc-bus.c
index 82a84d5..5c5b3fc 100644
--- a/drivers/uwb/umc-bus.c
+++ b/drivers/uwb/umc-bus.c
@@ -63,7 +63,7 @@
struct device *parent = umc->dev.parent;
int ret = 0;
- if (device_trylock(parent))
+ if (!device_trylock(parent))
return -EAGAIN;
ret = device_for_each_child(parent, parent, umc_bus_pre_reset_helper);
if (ret >= 0)
diff --git a/drivers/video/backlight/adp5520_bl.c b/drivers/video/backlight/adp5520_bl.c
index df5db99..a1e41d4 100644
--- a/drivers/video/backlight/adp5520_bl.c
+++ b/drivers/video/backlight/adp5520_bl.c
@@ -282,7 +282,7 @@
.attrs = adp5520_bl_attributes,
};
-static int __devinit adp5520_bl_probe(struct platform_device *pdev)
+static int adp5520_bl_probe(struct platform_device *pdev)
{
struct backlight_properties props;
struct backlight_device *bl;
@@ -333,7 +333,7 @@
return ret;
}
-static int __devexit adp5520_bl_remove(struct platform_device *pdev)
+static int adp5520_bl_remove(struct platform_device *pdev)
{
struct backlight_device *bl = platform_get_drvdata(pdev);
struct adp5520_bl *data = bl_get_data(bl);
@@ -375,7 +375,7 @@
.owner = THIS_MODULE,
},
.probe = adp5520_bl_probe,
- .remove = __devexit_p(adp5520_bl_remove),
+ .remove = adp5520_bl_remove,
.suspend = adp5520_bl_suspend,
.resume = adp5520_bl_resume,
};
diff --git a/drivers/video/backlight/adp8860_bl.c b/drivers/video/backlight/adp8860_bl.c
index 77d1fdb..6bb72c0 100644
--- a/drivers/video/backlight/adp8860_bl.c
+++ b/drivers/video/backlight/adp8860_bl.c
@@ -213,7 +213,7 @@
return ret;
}
-static int __devinit adp8860_led_probe(struct i2c_client *client)
+static int adp8860_led_probe(struct i2c_client *client)
{
struct adp8860_backlight_platform_data *pdata =
client->dev.platform_data;
@@ -295,7 +295,7 @@
return ret;
}
-static int __devexit adp8860_led_remove(struct i2c_client *client)
+static int adp8860_led_remove(struct i2c_client *client)
{
struct adp8860_backlight_platform_data *pdata =
client->dev.platform_data;
@@ -310,12 +310,12 @@
return 0;
}
#else
-static int __devinit adp8860_led_probe(struct i2c_client *client)
+static int adp8860_led_probe(struct i2c_client *client)
{
return 0;
}
-static int __devexit adp8860_led_remove(struct i2c_client *client)
+static int adp8860_led_remove(struct i2c_client *client)
{
return 0;
}
@@ -650,7 +650,7 @@
.attrs = adp8860_bl_attributes,
};
-static int __devinit adp8860_probe(struct i2c_client *client,
+static int adp8860_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct backlight_device *bl;
@@ -755,7 +755,7 @@
return ret;
}
-static int __devexit adp8860_remove(struct i2c_client *client)
+static int adp8860_remove(struct i2c_client *client)
{
struct adp8860_bl *data = i2c_get_clientdata(client);
@@ -805,7 +805,7 @@
.name = KBUILD_MODNAME,
},
.probe = adp8860_probe,
- .remove = __devexit_p(adp8860_remove),
+ .remove = adp8860_remove,
.suspend = adp8860_i2c_suspend,
.resume = adp8860_i2c_resume,
.id_table = adp8860_id,
diff --git a/drivers/video/backlight/adp8870_bl.c b/drivers/video/backlight/adp8870_bl.c
index edf7f91..63c882b 100644
--- a/drivers/video/backlight/adp8870_bl.c
+++ b/drivers/video/backlight/adp8870_bl.c
@@ -235,7 +235,7 @@
return ret;
}
-static int __devinit adp8870_led_probe(struct i2c_client *client)
+static int adp8870_led_probe(struct i2c_client *client)
{
struct adp8870_backlight_platform_data *pdata =
client->dev.platform_data;
@@ -320,7 +320,7 @@
return ret;
}
-static int __devexit adp8870_led_remove(struct i2c_client *client)
+static int adp8870_led_remove(struct i2c_client *client)
{
struct adp8870_backlight_platform_data *pdata =
client->dev.platform_data;
@@ -335,12 +335,12 @@
return 0;
}
#else
-static int __devinit adp8870_led_probe(struct i2c_client *client)
+static int adp8870_led_probe(struct i2c_client *client)
{
return 0;
}
-static int __devexit adp8870_led_remove(struct i2c_client *client)
+static int adp8870_led_remove(struct i2c_client *client)
{
return 0;
}
@@ -839,7 +839,7 @@
.attrs = adp8870_bl_attributes,
};
-static int __devinit adp8870_probe(struct i2c_client *client,
+static int adp8870_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct backlight_properties props;
@@ -929,7 +929,7 @@
return ret;
}
-static int __devexit adp8870_remove(struct i2c_client *client)
+static int adp8870_remove(struct i2c_client *client)
{
struct adp8870_bl *data = i2c_get_clientdata(client);
@@ -977,7 +977,7 @@
.name = KBUILD_MODNAME,
},
.probe = adp8870_probe,
- .remove = __devexit_p(adp8870_remove),
+ .remove = adp8870_remove,
.suspend = adp8870_i2c_suspend,
.resume = adp8870_i2c_resume,
.id_table = adp8870_id,
diff --git a/drivers/video/backlight/ams369fg06.c b/drivers/video/backlight/ams369fg06.c
index 3729238..f57e190 100644
--- a/drivers/video/backlight/ams369fg06.c
+++ b/drivers/video/backlight/ams369fg06.c
@@ -474,7 +474,7 @@
.update_status = ams369fg06_set_brightness,
};
-static int __devinit ams369fg06_probe(struct spi_device *spi)
+static int ams369fg06_probe(struct spi_device *spi)
{
int ret = 0;
struct ams369fg06 *lcd = NULL;
@@ -548,7 +548,7 @@
return ret;
}
-static int __devexit ams369fg06_remove(struct spi_device *spi)
+static int ams369fg06_remove(struct spi_device *spi)
{
struct ams369fg06 *lcd = dev_get_drvdata(&spi->dev);
@@ -617,7 +617,7 @@
.owner = THIS_MODULE,
},
.probe = ams369fg06_probe,
- .remove = __devexit_p(ams369fg06_remove),
+ .remove = ams369fg06_remove,
.shutdown = ams369fg06_shutdown,
.suspend = ams369fg06_suspend,
.resume = ams369fg06_resume,
diff --git a/drivers/video/backlight/apple_bl.c b/drivers/video/backlight/apple_bl.c
index 9dc73ac..f088d4c 100644
--- a/drivers/video/backlight/apple_bl.c
+++ b/drivers/video/backlight/apple_bl.c
@@ -137,7 +137,7 @@
.set_brightness = nvidia_chipset_set_brightness,
};
-static int __devinit apple_bl_add(struct acpi_device *dev)
+static int apple_bl_add(struct acpi_device *dev)
{
struct backlight_properties props;
struct pci_dev *host;
@@ -196,7 +196,7 @@
return 0;
}
-static int __devexit apple_bl_remove(struct acpi_device *dev, int type)
+static int apple_bl_remove(struct acpi_device *dev, int type)
{
backlight_device_unregister(apple_backlight_device);
diff --git a/drivers/video/backlight/corgi_lcd.c b/drivers/video/backlight/corgi_lcd.c
index c781768..eaaebf2 100644
--- a/drivers/video/backlight/corgi_lcd.c
+++ b/drivers/video/backlight/corgi_lcd.c
@@ -529,7 +529,7 @@
return 0;
}
-static int __devinit corgi_lcd_probe(struct spi_device *spi)
+static int corgi_lcd_probe(struct spi_device *spi)
{
struct backlight_properties props;
struct corgi_lcd_platform_data *pdata = spi->dev.platform_data;
@@ -590,7 +590,7 @@
return ret;
}
-static int __devexit corgi_lcd_remove(struct spi_device *spi)
+static int corgi_lcd_remove(struct spi_device *spi)
{
struct corgi_lcd *lcd = dev_get_drvdata(&spi->dev);
@@ -611,7 +611,7 @@
.owner = THIS_MODULE,
},
.probe = corgi_lcd_probe,
- .remove = __devexit_p(corgi_lcd_remove),
+ .remove = corgi_lcd_remove,
.suspend = corgi_lcd_suspend,
.resume = corgi_lcd_resume,
};
diff --git a/drivers/video/backlight/ep93xx_bl.c b/drivers/video/backlight/ep93xx_bl.c
index 08214e1..ef3e21e 100644
--- a/drivers/video/backlight/ep93xx_bl.c
+++ b/drivers/video/backlight/ep93xx_bl.c
@@ -141,7 +141,7 @@
.owner = THIS_MODULE,
},
.probe = ep93xxbl_probe,
- .remove = __devexit_p(ep93xxbl_remove),
+ .remove = ep93xxbl_remove,
.suspend = ep93xxbl_suspend,
.resume = ep93xxbl_resume,
};
diff --git a/drivers/video/backlight/hp680_bl.c b/drivers/video/backlight/hp680_bl.c
index 38aa002..c999663 100644
--- a/drivers/video/backlight/hp680_bl.c
+++ b/drivers/video/backlight/hp680_bl.c
@@ -103,7 +103,7 @@
.update_status = hp680bl_set_intensity,
};
-static int __devinit hp680bl_probe(struct platform_device *pdev)
+static int hp680bl_probe(struct platform_device *pdev)
{
struct backlight_properties props;
struct backlight_device *bd;
diff --git a/drivers/video/backlight/ili9320.c b/drivers/video/backlight/ili9320.c
index 9327cd1..66cc313 100644
--- a/drivers/video/backlight/ili9320.c
+++ b/drivers/video/backlight/ili9320.c
@@ -171,7 +171,7 @@
.set_power = ili9320_set_power,
};
-static void __devinit ili9320_setup_spi(struct ili9320 *ili,
+static void ili9320_setup_spi(struct ili9320 *ili,
struct spi_device *dev)
{
struct ili9320_spi *spi = &ili->access.spi;
@@ -197,7 +197,7 @@
spi_message_add_tail(&spi->xfer[1], &spi->message);
}
-int __devinit ili9320_probe_spi(struct spi_device *spi,
+int ili9320_probe_spi(struct spi_device *spi,
struct ili9320_client *client)
{
struct ili9320_platdata *cfg = spi->dev.platform_data;
diff --git a/drivers/video/backlight/l4f00242t03.c b/drivers/video/backlight/l4f00242t03.c
index 2d90c06..f5aa0a5 100644
--- a/drivers/video/backlight/l4f00242t03.c
+++ b/drivers/video/backlight/l4f00242t03.c
@@ -150,7 +150,7 @@
.get_power = l4f00242t03_lcd_power_get,
};
-static int __devinit l4f00242t03_probe(struct spi_device *spi)
+static int l4f00242t03_probe(struct spi_device *spi)
{
struct l4f00242t03_priv *priv;
struct l4f00242t03_pdata *pdata = spi->dev.platform_data;
@@ -230,7 +230,7 @@
return ret;
}
-static int __devexit l4f00242t03_remove(struct spi_device *spi)
+static int l4f00242t03_remove(struct spi_device *spi)
{
struct l4f00242t03_priv *priv = dev_get_drvdata(&spi->dev);
@@ -260,7 +260,7 @@
.owner = THIS_MODULE,
},
.probe = l4f00242t03_probe,
- .remove = __devexit_p(l4f00242t03_remove),
+ .remove = l4f00242t03_remove,
.shutdown = l4f00242t03_shutdown,
};
diff --git a/drivers/video/backlight/ld9040.c b/drivers/video/backlight/ld9040.c
index 58f517f..1cb3524 100644
--- a/drivers/video/backlight/ld9040.c
+++ b/drivers/video/backlight/ld9040.c
@@ -788,7 +788,7 @@
return ret;
}
-static int __devexit ld9040_remove(struct spi_device *spi)
+static int ld9040_remove(struct spi_device *spi)
{
struct ld9040 *lcd = dev_get_drvdata(&spi->dev);
@@ -847,7 +847,7 @@
.owner = THIS_MODULE,
},
.probe = ld9040_probe,
- .remove = __devexit_p(ld9040_remove),
+ .remove = ld9040_remove,
.shutdown = ld9040_shutdown,
.suspend = ld9040_suspend,
.resume = ld9040_resume,
diff --git a/drivers/video/backlight/lm3533_bl.c b/drivers/video/backlight/lm3533_bl.c
index 18dca0c..5d18d4d 100644
--- a/drivers/video/backlight/lm3533_bl.c
+++ b/drivers/video/backlight/lm3533_bl.c
@@ -257,7 +257,7 @@
.attrs = lm3533_bl_attributes
};
-static int __devinit lm3533_bl_setup(struct lm3533_bl *bl,
+static int lm3533_bl_setup(struct lm3533_bl *bl,
struct lm3533_bl_platform_data *pdata)
{
int ret;
@@ -269,7 +269,7 @@
return lm3533_ctrlbank_set_pwm(&bl->cb, pdata->pwm);
}
-static int __devinit lm3533_bl_probe(struct platform_device *pdev)
+static int lm3533_bl_probe(struct platform_device *pdev)
{
struct lm3533 *lm3533;
struct lm3533_bl_platform_data *pdata;
@@ -351,7 +351,7 @@
return ret;
}
-static int __devexit lm3533_bl_remove(struct platform_device *pdev)
+static int lm3533_bl_remove(struct platform_device *pdev)
{
struct lm3533_bl *bl = platform_get_drvdata(pdev);
struct backlight_device *bd = bl->bd;
@@ -406,7 +406,7 @@
.owner = THIS_MODULE,
},
.probe = lm3533_bl_probe,
- .remove = __devexit_p(lm3533_bl_remove),
+ .remove = lm3533_bl_remove,
.shutdown = lm3533_bl_shutdown,
.suspend = lm3533_bl_suspend,
.resume = lm3533_bl_resume,
diff --git a/drivers/video/backlight/lm3630_bl.c b/drivers/video/backlight/lm3630_bl.c
index dc19144..0207bc0 100644
--- a/drivers/video/backlight/lm3630_bl.c
+++ b/drivers/video/backlight/lm3630_bl.c
@@ -55,7 +55,7 @@
};
/* initialize chip */
-static int __devinit lm3630_chip_init(struct lm3630_chip_data *pchip)
+static int lm3630_chip_init(struct lm3630_chip_data *pchip)
{
int ret;
unsigned int reg_val;
@@ -349,7 +349,7 @@
.max_register = REG_MAX,
};
-static int __devinit lm3630_probe(struct i2c_client *client,
+static int lm3630_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct lm3630_platform_data *pdata = client->dev.platform_data;
@@ -429,7 +429,7 @@
return ret;
}
-static int __devexit lm3630_remove(struct i2c_client *client)
+static int lm3630_remove(struct i2c_client *client)
{
int ret;
struct lm3630_chip_data *pchip = i2c_get_clientdata(client);
@@ -463,7 +463,7 @@
.name = LM3630_NAME,
},
.probe = lm3630_probe,
- .remove = __devexit_p(lm3630_remove),
+ .remove = lm3630_remove,
.id_table = lm3630_id,
};
diff --git a/drivers/video/backlight/lm3639_bl.c b/drivers/video/backlight/lm3639_bl.c
index 585949b..b0e1e8b 100644
--- a/drivers/video/backlight/lm3639_bl.c
+++ b/drivers/video/backlight/lm3639_bl.c
@@ -48,7 +48,7 @@
};
/* initialize chip */
-static int __devinit lm3639_chip_init(struct lm3639_chip_data *pchip)
+static int lm3639_chip_init(struct lm3639_chip_data *pchip)
{
int ret;
unsigned int reg_val;
@@ -299,7 +299,7 @@
.max_register = REG_MAX,
};
-static int __devinit lm3639_probe(struct i2c_client *client,
+static int lm3639_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
int ret;
@@ -397,7 +397,7 @@
return ret;
}
-static int __devexit lm3639_remove(struct i2c_client *client)
+static int lm3639_remove(struct i2c_client *client)
{
struct lm3639_chip_data *pchip = i2c_get_clientdata(client);
@@ -425,7 +425,7 @@
.name = LM3639_NAME,
},
.probe = lm3639_probe,
- .remove = __devexit_p(lm3639_remove),
+ .remove = lm3639_remove,
.id_table = lm3639_id,
};
diff --git a/drivers/video/backlight/lms283gf05.c b/drivers/video/backlight/lms283gf05.c
index ea43f22..b29c707 100644
--- a/drivers/video/backlight/lms283gf05.c
+++ b/drivers/video/backlight/lms283gf05.c
@@ -150,7 +150,7 @@
.get_power = NULL,
};
-static int __devinit lms283gf05_probe(struct spi_device *spi)
+static int lms283gf05_probe(struct spi_device *spi)
{
struct lms283gf05_state *st;
struct lms283gf05_pdata *pdata = spi->dev.platform_data;
@@ -193,7 +193,7 @@
return 0;
}
-static int __devexit lms283gf05_remove(struct spi_device *spi)
+static int lms283gf05_remove(struct spi_device *spi)
{
struct lms283gf05_state *st = dev_get_drvdata(&spi->dev);
@@ -208,7 +208,7 @@
.owner = THIS_MODULE,
},
.probe = lms283gf05_probe,
- .remove = __devexit_p(lms283gf05_remove),
+ .remove = lms283gf05_remove,
};
module_spi_driver(lms283gf05_driver);
diff --git a/drivers/video/backlight/lp855x_bl.c b/drivers/video/backlight/lp855x_bl.c
index aa6d4f7..fd985e0 100644
--- a/drivers/video/backlight/lp855x_bl.c
+++ b/drivers/video/backlight/lp855x_bl.c
@@ -297,7 +297,7 @@
return ret;
}
-static int __devexit lp855x_remove(struct i2c_client *cl)
+static int lp855x_remove(struct i2c_client *cl)
{
struct lp855x *lp = i2c_get_clientdata(cl);
@@ -324,7 +324,7 @@
.name = "lp855x",
},
.probe = lp855x_probe,
- .remove = __devexit_p(lp855x_remove),
+ .remove = lp855x_remove,
.id_table = lp855x_ids,
};
diff --git a/drivers/video/backlight/ltv350qv.c b/drivers/video/backlight/ltv350qv.c
index 4066a5b..226d813 100644
--- a/drivers/video/backlight/ltv350qv.c
+++ b/drivers/video/backlight/ltv350qv.c
@@ -226,7 +226,7 @@
.set_power = ltv350qv_set_power,
};
-static int __devinit ltv350qv_probe(struct spi_device *spi)
+static int ltv350qv_probe(struct spi_device *spi)
{
struct ltv350qv *lcd;
struct lcd_device *ld;
@@ -261,7 +261,7 @@
return ret;
}
-static int __devexit ltv350qv_remove(struct spi_device *spi)
+static int ltv350qv_remove(struct spi_device *spi)
{
struct ltv350qv *lcd = dev_get_drvdata(&spi->dev);
@@ -305,7 +305,7 @@
},
.probe = ltv350qv_probe,
- .remove = __devexit_p(ltv350qv_remove),
+ .remove = ltv350qv_remove,
.shutdown = ltv350qv_shutdown,
.suspend = ltv350qv_suspend,
.resume = ltv350qv_resume,
diff --git a/drivers/video/backlight/max8925_bl.c b/drivers/video/backlight/max8925_bl.c
index f72ba54..c6bec7a 100644
--- a/drivers/video/backlight/max8925_bl.c
+++ b/drivers/video/backlight/max8925_bl.c
@@ -101,7 +101,7 @@
.get_brightness = max8925_backlight_get_brightness,
};
-static int __devinit max8925_backlight_probe(struct platform_device *pdev)
+static int max8925_backlight_probe(struct platform_device *pdev)
{
struct max8925_chip *chip = dev_get_drvdata(pdev->dev.parent);
struct max8925_backlight_pdata *pdata = pdev->dev.platform_data;
@@ -171,7 +171,7 @@
return ret;
}
-static int __devexit max8925_backlight_remove(struct platform_device *pdev)
+static int max8925_backlight_remove(struct platform_device *pdev)
{
struct backlight_device *bl = platform_get_drvdata(pdev);
@@ -185,7 +185,7 @@
.owner = THIS_MODULE,
},
.probe = max8925_backlight_probe,
- .remove = __devexit_p(max8925_backlight_remove),
+ .remove = max8925_backlight_remove,
};
module_platform_driver(max8925_backlight_driver);
diff --git a/drivers/video/backlight/pcf50633-backlight.c b/drivers/video/backlight/pcf50633-backlight.c
index c092159..0087396 100644
--- a/drivers/video/backlight/pcf50633-backlight.c
+++ b/drivers/video/backlight/pcf50633-backlight.c
@@ -99,7 +99,7 @@
.options = BL_CORE_SUSPENDRESUME,
};
-static int __devinit pcf50633_bl_probe(struct platform_device *pdev)
+static int pcf50633_bl_probe(struct platform_device *pdev)
{
struct pcf50633_bl *pcf_bl;
struct device *parent = pdev->dev.parent;
@@ -145,7 +145,7 @@
return 0;
}
-static int __devexit pcf50633_bl_remove(struct platform_device *pdev)
+static int pcf50633_bl_remove(struct platform_device *pdev)
{
struct pcf50633_bl *pcf_bl = platform_get_drvdata(pdev);
@@ -158,7 +158,7 @@
static struct platform_driver pcf50633_bl_driver = {
.probe = pcf50633_bl_probe,
- .remove = __devexit_p(pcf50633_bl_remove),
+ .remove = pcf50633_bl_remove,
.driver = {
.name = "pcf50633-backlight",
},
diff --git a/drivers/video/backlight/platform_lcd.c b/drivers/video/backlight/platform_lcd.c
index ca4f5d70..894bfc5 100644
--- a/drivers/video/backlight/platform_lcd.c
+++ b/drivers/video/backlight/platform_lcd.c
@@ -73,7 +73,7 @@
.check_fb = platform_lcd_match,
};
-static int __devinit platform_lcd_probe(struct platform_device *pdev)
+static int platform_lcd_probe(struct platform_device *pdev)
{
struct plat_lcd_data *pdata;
struct platform_lcd *plcd;
@@ -112,7 +112,7 @@
return err;
}
-static int __devexit platform_lcd_remove(struct platform_device *pdev)
+static int platform_lcd_remove(struct platform_device *pdev)
{
struct platform_lcd *plcd = platform_get_drvdata(pdev);
@@ -164,7 +164,7 @@
.of_match_table = of_match_ptr(platform_lcd_of_match),
},
.probe = platform_lcd_probe,
- .remove = __devexit_p(platform_lcd_remove),
+ .remove = platform_lcd_remove,
};
module_platform_driver(platform_lcd_driver);
diff --git a/drivers/video/backlight/s6e63m0.c b/drivers/video/backlight/s6e63m0.c
index 6437ae4..484e10d 100644
--- a/drivers/video/backlight/s6e63m0.c
+++ b/drivers/video/backlight/s6e63m0.c
@@ -733,7 +733,7 @@
static DEVICE_ATTR(gamma_table, 0444,
s6e63m0_sysfs_show_gamma_table, NULL);
-static int __devinit s6e63m0_probe(struct spi_device *spi)
+static int s6e63m0_probe(struct spi_device *spi)
{
int ret = 0;
struct s6e63m0 *lcd = NULL;
@@ -825,7 +825,7 @@
return ret;
}
-static int __devexit s6e63m0_remove(struct spi_device *spi)
+static int s6e63m0_remove(struct spi_device *spi)
{
struct s6e63m0 *lcd = dev_get_drvdata(&spi->dev);
@@ -897,7 +897,7 @@
.owner = THIS_MODULE,
},
.probe = s6e63m0_probe,
- .remove = __devexit_p(s6e63m0_remove),
+ .remove = s6e63m0_remove,
.shutdown = s6e63m0_shutdown,
.suspend = s6e63m0_suspend,
.resume = s6e63m0_resume,
diff --git a/drivers/video/backlight/tdo24m.c b/drivers/video/backlight/tdo24m.c
index 02444d0..146ffb9 100644
--- a/drivers/video/backlight/tdo24m.c
+++ b/drivers/video/backlight/tdo24m.c
@@ -328,7 +328,7 @@
.set_mode = tdo24m_set_mode,
};
-static int __devinit tdo24m_probe(struct spi_device *spi)
+static int tdo24m_probe(struct spi_device *spi)
{
struct tdo24m *lcd;
struct spi_message *m;
@@ -401,7 +401,7 @@
return err;
}
-static int __devexit tdo24m_remove(struct spi_device *spi)
+static int tdo24m_remove(struct spi_device *spi)
{
struct tdo24m *lcd = dev_get_drvdata(&spi->dev);
@@ -444,7 +444,7 @@
.owner = THIS_MODULE,
},
.probe = tdo24m_probe,
- .remove = __devexit_p(tdo24m_remove),
+ .remove = tdo24m_remove,
.shutdown = tdo24m_shutdown,
.suspend = tdo24m_suspend,
.resume = tdo24m_resume,
diff --git a/drivers/video/backlight/tosa_bl.c b/drivers/video/backlight/tosa_bl.c
index 49342e1..a0521ab 100644
--- a/drivers/video/backlight/tosa_bl.c
+++ b/drivers/video/backlight/tosa_bl.c
@@ -78,7 +78,7 @@
.update_status = tosa_bl_update_status,
};
-static int __devinit tosa_bl_probe(struct i2c_client *client,
+static int tosa_bl_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct backlight_properties props;
@@ -126,7 +126,7 @@
return ret;
}
-static int __devexit tosa_bl_remove(struct i2c_client *client)
+static int tosa_bl_remove(struct i2c_client *client)
{
struct tosa_bl_data *data = i2c_get_clientdata(client);
@@ -170,7 +170,7 @@
.owner = THIS_MODULE,
},
.probe = tosa_bl_probe,
- .remove = __devexit_p(tosa_bl_remove),
+ .remove = tosa_bl_remove,
.suspend = tosa_bl_suspend,
.resume = tosa_bl_resume,
.id_table = tosa_bl_id,
diff --git a/drivers/video/backlight/tosa_lcd.c b/drivers/video/backlight/tosa_lcd.c
index 33047a66..86fff88 100644
--- a/drivers/video/backlight/tosa_lcd.c
+++ b/drivers/video/backlight/tosa_lcd.c
@@ -169,7 +169,7 @@
.set_mode = tosa_lcd_set_mode,
};
-static int __devinit tosa_lcd_probe(struct spi_device *spi)
+static int tosa_lcd_probe(struct spi_device *spi)
{
int ret;
struct tosa_lcd_data *data;
@@ -226,7 +226,7 @@
return ret;
}
-static int __devexit tosa_lcd_remove(struct spi_device *spi)
+static int tosa_lcd_remove(struct spi_device *spi)
{
struct tosa_lcd_data *data = dev_get_drvdata(&spi->dev);
@@ -275,7 +275,7 @@
.owner = THIS_MODULE,
},
.probe = tosa_lcd_probe,
- .remove = __devexit_p(tosa_lcd_remove),
+ .remove = tosa_lcd_remove,
.suspend = tosa_lcd_suspend,
.resume = tosa_lcd_resume,
};
diff --git a/drivers/video/backlight/vgg2432a4.c b/drivers/video/backlight/vgg2432a4.c
index b617fae..712b0ac 100644
--- a/drivers/video/backlight/vgg2432a4.c
+++ b/drivers/video/backlight/vgg2432a4.c
@@ -227,7 +227,7 @@
/* Device probe */
-static int __devinit vgg2432a4_probe(struct spi_device *spi)
+static int vgg2432a4_probe(struct spi_device *spi)
{
int ret;
@@ -240,7 +240,7 @@
return 0;
}
-static int __devexit vgg2432a4_remove(struct spi_device *spi)
+static int vgg2432a4_remove(struct spi_device *spi)
{
return ili9320_remove(dev_get_drvdata(&spi->dev));
}
@@ -256,7 +256,7 @@
.owner = THIS_MODULE,
},
.probe = vgg2432a4_probe,
- .remove = __devexit_p(vgg2432a4_remove),
+ .remove = vgg2432a4_remove,
.shutdown = vgg2432a4_shutdown,
.suspend = vgg2432a4_suspend,
.resume = vgg2432a4_resume,
diff --git a/drivers/vme/boards/vme_vmivme7805.c b/drivers/vme/boards/vme_vmivme7805.c
index 8e05bb4..dd22b50 100644
--- a/drivers/vme/boards/vme_vmivme7805.c
+++ b/drivers/vme/boards/vme_vmivme7805.c
@@ -19,10 +19,8 @@
#include "vme_vmivme7805.h"
-static int __init vmic_init(void);
static int vmic_probe(struct pci_dev *, const struct pci_device_id *);
static void vmic_remove(struct pci_dev *);
-static void __exit vmic_exit(void);
/** Base address to access FPGA register */
static void *vmic_base;
@@ -41,11 +39,6 @@
.remove = vmic_remove,
};
-static int __init vmic_init(void)
-{
- return pci_register_driver(&vmic_driver);
-}
-
static int vmic_probe(struct pci_dev *pdev, const struct pci_device_id *id)
{
int retval;
@@ -109,15 +102,9 @@
}
-static void __exit vmic_exit(void)
-{
- pci_unregister_driver(&vmic_driver);
-}
+module_pci_driver(vmic_driver);
MODULE_DESCRIPTION("VMIVME-7805 board support driver");
MODULE_AUTHOR("Arthur Benilov <arthur.benilov@iba-group.com>");
MODULE_LICENSE("GPL");
-module_init(vmic_init);
-module_exit(vmic_exit);
-
diff --git a/drivers/vme/bridges/vme_ca91cx42.c b/drivers/vme/bridges/vme_ca91cx42.c
index 1425d22c..64bfea3 100644
--- a/drivers/vme/bridges/vme_ca91cx42.c
+++ b/drivers/vme/bridges/vme_ca91cx42.c
@@ -34,10 +34,8 @@
#include "../vme_bridge.h"
#include "vme_ca91cx42.h"
-static int __init ca91cx42_init(void);
static int ca91cx42_probe(struct pci_dev *, const struct pci_device_id *);
static void ca91cx42_remove(struct pci_dev *);
-static void __exit ca91cx42_exit(void);
/* Module parameters */
static int geoid;
@@ -1523,11 +1521,6 @@
pci_free_consistent(pdev, size, vaddr, dma);
}
-static int __init ca91cx42_init(void)
-{
- return pci_register_driver(&ca91cx42_driver);
-}
-
/*
* Configure CR/CSR space
*
@@ -1944,16 +1937,10 @@
kfree(ca91cx42_bridge);
}
-static void __exit ca91cx42_exit(void)
-{
- pci_unregister_driver(&ca91cx42_driver);
-}
+module_pci_driver(ca91cx42_driver);
MODULE_PARM_DESC(geoid, "Override geographical addressing");
module_param(geoid, int, 0);
MODULE_DESCRIPTION("VME driver for the Tundra Universe II VME bridge");
MODULE_LICENSE("GPL");
-
-module_init(ca91cx42_init);
-module_exit(ca91cx42_exit);
diff --git a/drivers/vme/bridges/vme_tsi148.c b/drivers/vme/bridges/vme_tsi148.c
index 5fbd08f..9c1aa4d 100644
--- a/drivers/vme/bridges/vme_tsi148.c
+++ b/drivers/vme/bridges/vme_tsi148.c
@@ -35,10 +35,8 @@
#include "../vme_bridge.h"
#include "vme_tsi148.h"
-static int __init tsi148_init(void);
static int tsi148_probe(struct pci_dev *, const struct pci_device_id *);
static void tsi148_remove(struct pci_dev *);
-static void __exit tsi148_exit(void);
/* Module parameter */
@@ -2244,11 +2242,6 @@
pci_free_consistent(pdev, size, vaddr, dma);
}
-static int __init tsi148_init(void)
-{
- return pci_register_driver(&tsi148_driver);
-}
-
/*
* Configure CR/CSR space
*
@@ -2754,10 +2747,7 @@
kfree(tsi148_bridge);
}
-static void __exit tsi148_exit(void)
-{
- pci_unregister_driver(&tsi148_driver);
-}
+module_pci_driver(tsi148_driver);
MODULE_PARM_DESC(err_chk, "Check for VME errors on reads and writes");
module_param(err_chk, bool, 0);
@@ -2767,6 +2757,3 @@
MODULE_DESCRIPTION("VME driver for the Tundra Tempe VME bridge");
MODULE_LICENSE("GPL");
-
-module_init(tsi148_init);
-module_exit(tsi148_exit);
diff --git a/drivers/w1/masters/Kconfig b/drivers/w1/masters/Kconfig
index 7e98403..c433a74 100644
--- a/drivers/w1/masters/Kconfig
+++ b/drivers/w1/masters/Kconfig
@@ -26,7 +26,7 @@
config W1_MASTER_DS2482
tristate "Maxim DS2482 I2C to 1-Wire bridge"
- depends on I2C && EXPERIMENTAL
+ depends on I2C
help
If you say yes here you get support for the Maxim DS2482
I2C to 1-Wire bridge.
diff --git a/drivers/w1/masters/ds2482.c b/drivers/w1/masters/ds2482.c
index e5f7441..6429b9e 100644
--- a/drivers/w1/masters/ds2482.c
+++ b/drivers/w1/masters/ds2482.c
@@ -505,19 +505,8 @@
return 0;
}
-static int __init sensors_ds2482_init(void)
-{
- return i2c_add_driver(&ds2482_driver);
-}
-
-static void __exit sensors_ds2482_exit(void)
-{
- i2c_del_driver(&ds2482_driver);
-}
+module_i2c_driver(ds2482_driver);
MODULE_AUTHOR("Ben Gardner <bgardner@wabtec.com>");
MODULE_DESCRIPTION("DS2482 driver");
MODULE_LICENSE("GPL");
-
-module_init(sensors_ds2482_init);
-module_exit(sensors_ds2482_exit);
diff --git a/drivers/w1/masters/matrox_w1.c b/drivers/w1/masters/matrox_w1.c
index f667c26..d8667b0 100644
--- a/drivers/w1/masters/matrox_w1.c
+++ b/drivers/w1/masters/matrox_w1.c
@@ -48,14 +48,14 @@
};
MODULE_DEVICE_TABLE(pci, matrox_w1_tbl);
-static int __devinit matrox_w1_probe(struct pci_dev *, const struct pci_device_id *);
-static void __devexit matrox_w1_remove(struct pci_dev *);
+static int matrox_w1_probe(struct pci_dev *, const struct pci_device_id *);
+static void matrox_w1_remove(struct pci_dev *);
static struct pci_driver matrox_w1_pci_driver = {
.name = "matrox_w1",
.id_table = matrox_w1_tbl,
.probe = matrox_w1_probe,
- .remove = __devexit_p(matrox_w1_remove),
+ .remove = matrox_w1_remove,
};
/*
@@ -152,7 +152,7 @@
matrox_w1_write_reg(dev, MATROX_GET_CONTROL, 0x00);
}
-static int __devinit matrox_w1_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
+static int matrox_w1_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
{
struct matrox_device *dev;
int err;
@@ -220,7 +220,7 @@
return err;
}
-static void __devexit matrox_w1_remove(struct pci_dev *pdev)
+static void matrox_w1_remove(struct pci_dev *pdev)
{
struct matrox_device *dev = pci_get_drvdata(pdev);
diff --git a/drivers/w1/masters/mxc_w1.c b/drivers/w1/masters/mxc_w1.c
index 1cc61a7..d338b56 100644
--- a/drivers/w1/masters/mxc_w1.c
+++ b/drivers/w1/masters/mxc_w1.c
@@ -103,7 +103,7 @@
return ((__raw_readb(ctrl_addr)) >> 3) & 0x1;
}
-static int __devinit mxc_w1_probe(struct platform_device *pdev)
+static int mxc_w1_probe(struct platform_device *pdev)
{
struct mxc_w1_device *mdev;
struct resource *res;
@@ -117,9 +117,9 @@
if (!mdev)
return -ENOMEM;
- mdev->clk = clk_get(&pdev->dev, "owire");
- if (!mdev->clk) {
- err = -ENODEV;
+ mdev->clk = clk_get(&pdev->dev, NULL);
+ if (IS_ERR(mdev->clk)) {
+ err = PTR_ERR(mdev->clk);
goto failed_clk;
}
@@ -134,7 +134,7 @@
mdev->regs = ioremap(res->start, resource_size(res));
if (!mdev->regs) {
- printk(KERN_ERR "Cannot map frame buffer registers\n");
+ dev_err(&pdev->dev, "Cannot map mxc_w1 registers\n");
goto failed_ioremap;
}
@@ -167,7 +167,7 @@
/*
* disassociate the w1 device from the driver
*/
-static int __devexit mxc_w1_remove(struct platform_device *pdev)
+static int mxc_w1_remove(struct platform_device *pdev)
{
struct mxc_w1_device *mdev = platform_get_drvdata(pdev);
struct resource *res;
@@ -191,21 +191,9 @@
.name = "mxc_w1",
},
.probe = mxc_w1_probe,
- .remove = mxc_w1_remove,
+ .remove = __devexit_p(mxc_w1_remove),
};
-
-static int __init mxc_w1_init(void)
-{
- return platform_driver_register(&mxc_w1_driver);
-}
-
-static void mxc_w1_exit(void)
-{
- platform_driver_unregister(&mxc_w1_driver);
-}
-
-module_init(mxc_w1_init);
-module_exit(mxc_w1_exit);
+module_platform_driver(mxc_w1_driver);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Freescale Semiconductors Inc");
diff --git a/drivers/w1/masters/omap_hdq.c b/drivers/w1/masters/omap_hdq.c
index ca8e60b..184dbce 100644
--- a/drivers/w1/masters/omap_hdq.c
+++ b/drivers/w1/masters/omap_hdq.c
@@ -69,12 +69,12 @@
int init_trans;
};
-static int __devinit omap_hdq_probe(struct platform_device *pdev);
-static int __devexit omap_hdq_remove(struct platform_device *pdev);
+static int omap_hdq_probe(struct platform_device *pdev);
+static int omap_hdq_remove(struct platform_device *pdev);
static struct platform_driver omap_hdq_driver = {
.probe = omap_hdq_probe,
- .remove = __devexit_p(omap_hdq_remove),
+ .remove = omap_hdq_remove,
.driver = {
.name = "omap_hdq",
},
@@ -537,7 +537,7 @@
}
}
-static int __devinit omap_hdq_probe(struct platform_device *pdev)
+static int omap_hdq_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct hdq_data *hdq_data;
@@ -613,7 +613,7 @@
return ret;
}
-static int __devexit omap_hdq_remove(struct platform_device *pdev)
+static int omap_hdq_remove(struct platform_device *pdev)
{
struct hdq_data *hdq_data = platform_get_drvdata(pdev);
diff --git a/drivers/w1/masters/w1-gpio.c b/drivers/w1/masters/w1-gpio.c
index 6012c4e..85b363a 100644
--- a/drivers/w1/masters/w1-gpio.c
+++ b/drivers/w1/masters/w1-gpio.c
@@ -16,6 +16,9 @@
#include <linux/gpio.h>
#include <linux/of_platform.h>
#include <linux/of_gpio.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/err.h>
+#include <linux/of.h>
#include "../w1.h"
#include "../w1_int.h"
@@ -44,7 +47,6 @@
return gpio_get_value(pdata->pin) ? 1 : 0;
}
-#ifdef CONFIG_OF
static struct of_device_id w1_gpio_dt_ids[] = {
{ .compatible = "w1-gpio" },
{}
@@ -55,11 +57,6 @@
{
struct w1_gpio_platform_data *pdata = pdev->dev.platform_data;
struct device_node *np = pdev->dev.of_node;
- const struct of_device_id *of_id =
- of_match_device(w1_gpio_dt_ids, &pdev->dev);
-
- if (!of_id)
- return 0;
pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
if (!pdata)
@@ -74,41 +71,53 @@
return 0;
}
-#else
-static int w1_gpio_probe_dt(struct platform_device *pdev)
-{
- return 0;
-}
-#endif
static int __init w1_gpio_probe(struct platform_device *pdev)
{
struct w1_bus_master *master;
struct w1_gpio_platform_data *pdata;
+ struct pinctrl *pinctrl;
int err;
- err = w1_gpio_probe_dt(pdev);
- if (err < 0)
- return err;
+ pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
+ if (IS_ERR(pinctrl))
+ dev_warn(&pdev->dev, "unable to select pin group\n");
+
+ if (of_have_populated_dt()) {
+ err = w1_gpio_probe_dt(pdev);
+ if (err < 0) {
+ dev_err(&pdev->dev, "Failed to parse DT\n");
+ return err;
+ }
+ }
pdata = pdev->dev.platform_data;
- if (!pdata)
+ if (!pdata) {
+ dev_err(&pdev->dev, "No configuration data\n");
return -ENXIO;
+ }
master = kzalloc(sizeof(struct w1_bus_master), GFP_KERNEL);
- if (!master)
+ if (!master) {
+ dev_err(&pdev->dev, "Out of memory\n");
return -ENOMEM;
+ }
err = gpio_request(pdata->pin, "w1");
- if (err)
+ if (err) {
+ dev_err(&pdev->dev, "gpio_request (pin) failed\n");
goto free_master;
+ }
if (gpio_is_valid(pdata->ext_pullup_enable_pin)) {
err = gpio_request_one(pdata->ext_pullup_enable_pin,
GPIOF_INIT_LOW, "w1 pullup");
- if (err < 0)
+ if (err < 0) {
+ dev_err(&pdev->dev, "gpio_request_one "
+ "(ext_pullup_enable_pin) failed\n");
goto free_gpio;
+ }
}
master->data = pdata;
@@ -123,8 +132,10 @@
}
err = w1_add_master_device(master);
- if (err)
+ if (err) {
+ dev_err(&pdev->dev, "w1_add_master device failed\n");
goto free_gpio_ext_pu;
+ }
if (pdata->enable_external_pullup)
pdata->enable_external_pullup(1);
@@ -198,23 +209,13 @@
.owner = THIS_MODULE,
.of_match_table = of_match_ptr(w1_gpio_dt_ids),
},
+ .probe = w1_gpio_probe,
.remove = __exit_p(w1_gpio_remove),
.suspend = w1_gpio_suspend,
.resume = w1_gpio_resume,
};
-static int __init w1_gpio_init(void)
-{
- return platform_driver_probe(&w1_gpio_driver, w1_gpio_probe);
-}
-
-static void __exit w1_gpio_exit(void)
-{
- platform_driver_unregister(&w1_gpio_driver);
-}
-
-module_init(w1_gpio_init);
-module_exit(w1_gpio_exit);
+module_platform_driver(w1_gpio_driver);
MODULE_DESCRIPTION("GPIO w1 bus master driver");
MODULE_AUTHOR("Ville Syrjala <syrjala@sci.fi>");
diff --git a/drivers/w1/w1.c b/drivers/w1/w1.c
index 1a57437..7994d933 100644
--- a/drivers/w1/w1.c
+++ b/drivers/w1/w1.c
@@ -551,7 +551,6 @@
sysfs_remove_group(&master->dev.kobj, &w1_master_defattr_group);
}
-#ifdef CONFIG_HOTPLUG
static int w1_uevent(struct device *dev, struct kobj_uevent_env *env)
{
struct w1_master *md = NULL;
@@ -587,12 +586,6 @@
end:
return err;
}
-#else
-static int w1_uevent(struct device *dev, struct kobj_uevent_env *env)
-{
- return 0;
-}
-#endif
static int __w1_attach_slave_device(struct w1_slave *sl)
{
diff --git a/drivers/watchdog/acquirewdt.c b/drivers/watchdog/acquirewdt.c
index 4397881..24a5177 100644
--- a/drivers/watchdog/acquirewdt.c
+++ b/drivers/watchdog/acquirewdt.c
@@ -240,7 +240,7 @@
* Init & exit routines
*/
-static int __devinit acq_probe(struct platform_device *dev)
+static int acq_probe(struct platform_device *dev)
{
int ret;
@@ -275,7 +275,7 @@
return ret;
}
-static int __devexit acq_remove(struct platform_device *dev)
+static int acq_remove(struct platform_device *dev)
{
misc_deregister(&acq_miscdev);
release_region(wdt_start, 1);
@@ -293,7 +293,7 @@
static struct platform_driver acquirewdt_driver = {
.probe = acq_probe,
- .remove = __devexit_p(acq_remove),
+ .remove = acq_remove,
.shutdown = acq_shutdown,
.driver = {
.owner = THIS_MODULE,
diff --git a/drivers/watchdog/advantechwdt.c b/drivers/watchdog/advantechwdt.c
index 64ae9e9..cc6702f 100644
--- a/drivers/watchdog/advantechwdt.c
+++ b/drivers/watchdog/advantechwdt.c
@@ -238,7 +238,7 @@
* Init & exit routines
*/
-static int __devinit advwdt_probe(struct platform_device *dev)
+static int advwdt_probe(struct platform_device *dev)
{
int ret;
@@ -282,7 +282,7 @@
goto out;
}
-static int __devexit advwdt_remove(struct platform_device *dev)
+static int advwdt_remove(struct platform_device *dev)
{
misc_deregister(&advwdt_miscdev);
release_region(wdt_start, 1);
@@ -300,7 +300,7 @@
static struct platform_driver advwdt_driver = {
.probe = advwdt_probe,
- .remove = __devexit_p(advwdt_remove),
+ .remove = advwdt_remove,
.shutdown = advwdt_shutdown,
.driver = {
.owner = THIS_MODULE,
diff --git a/drivers/watchdog/ar7_wdt.c b/drivers/watchdog/ar7_wdt.c
index dc30dbd..3003e2a 100644
--- a/drivers/watchdog/ar7_wdt.c
+++ b/drivers/watchdog/ar7_wdt.c
@@ -274,7 +274,7 @@
.fops = &ar7_wdt_fops,
};
-static int __devinit ar7_wdt_probe(struct platform_device *pdev)
+static int ar7_wdt_probe(struct platform_device *pdev)
{
int rc;
@@ -314,7 +314,7 @@
return rc;
}
-static int __devexit ar7_wdt_remove(struct platform_device *pdev)
+static int ar7_wdt_remove(struct platform_device *pdev)
{
misc_deregister(&ar7_wdt_miscdev);
clk_put(vbus_clk);
@@ -330,7 +330,7 @@
static struct platform_driver ar7_wdt_driver = {
.probe = ar7_wdt_probe,
- .remove = __devexit_p(ar7_wdt_remove),
+ .remove = ar7_wdt_remove,
.shutdown = ar7_wdt_shutdown,
.driver = {
.owner = THIS_MODULE,
diff --git a/drivers/watchdog/at91rm9200_wdt.c b/drivers/watchdog/at91rm9200_wdt.c
index 7ef99a1..89831ed 100644
--- a/drivers/watchdog/at91rm9200_wdt.c
+++ b/drivers/watchdog/at91rm9200_wdt.c
@@ -199,7 +199,7 @@
.fops = &at91wdt_fops,
};
-static int __devinit at91wdt_probe(struct platform_device *pdev)
+static int at91wdt_probe(struct platform_device *pdev)
{
int res;
@@ -216,7 +216,7 @@
return 0;
}
-static int __devexit at91wdt_remove(struct platform_device *pdev)
+static int at91wdt_remove(struct platform_device *pdev)
{
int res;
@@ -254,7 +254,7 @@
static struct platform_driver at91wdt_driver = {
.probe = at91wdt_probe,
- .remove = __devexit_p(at91wdt_remove),
+ .remove = at91wdt_remove,
.shutdown = at91wdt_shutdown,
.suspend = at91wdt_suspend,
.resume = at91wdt_resume,
diff --git a/drivers/watchdog/ath79_wdt.c b/drivers/watchdog/ath79_wdt.c
index 1f9371f..7c8ede7 100644
--- a/drivers/watchdog/ath79_wdt.c
+++ b/drivers/watchdog/ath79_wdt.c
@@ -224,7 +224,7 @@
.fops = &ath79_wdt_fops,
};
-static int __devinit ath79_wdt_probe(struct platform_device *pdev)
+static int ath79_wdt_probe(struct platform_device *pdev)
{
u32 ctrl;
int err;
@@ -270,7 +270,7 @@
return err;
}
-static int __devexit ath79_wdt_remove(struct platform_device *pdev)
+static int ath79_wdt_remove(struct platform_device *pdev)
{
misc_deregister(&ath79_wdt_miscdev);
clk_disable(wdt_clk);
@@ -284,7 +284,7 @@
}
static struct platform_driver ath79_wdt_driver = {
- .remove = __devexit_p(ath79_wdt_remove),
+ .remove = ath79_wdt_remove,
.shutdown = ath97_wdt_shutdown,
.driver = {
.name = DRIVER_NAME,
diff --git a/drivers/watchdog/bcm63xx_wdt.c b/drivers/watchdog/bcm63xx_wdt.c
index 551880b..b2b80d4 100644
--- a/drivers/watchdog/bcm63xx_wdt.c
+++ b/drivers/watchdog/bcm63xx_wdt.c
@@ -236,7 +236,7 @@
};
-static int __devinit bcm63xx_wdt_probe(struct platform_device *pdev)
+static int bcm63xx_wdt_probe(struct platform_device *pdev)
{
int ret;
struct resource *r;
@@ -286,7 +286,7 @@
return ret;
}
-static int __devexit bcm63xx_wdt_remove(struct platform_device *pdev)
+static int bcm63xx_wdt_remove(struct platform_device *pdev)
{
if (!nowayout)
bcm63xx_wdt_pause();
@@ -304,7 +304,7 @@
static struct platform_driver bcm63xx_wdt_driver = {
.probe = bcm63xx_wdt_probe,
- .remove = __devexit_p(bcm63xx_wdt_remove),
+ .remove = bcm63xx_wdt_remove,
.shutdown = bcm63xx_wdt_shutdown,
.driver = {
.owner = THIS_MODULE,
diff --git a/drivers/watchdog/bfin_wdt.c b/drivers/watchdog/bfin_wdt.c
index 38bc383..5d36d6f 100644
--- a/drivers/watchdog/bfin_wdt.c
+++ b/drivers/watchdog/bfin_wdt.c
@@ -356,7 +356,7 @@
* Registers the misc device. Actual device
* initialization is handled by bfin_wdt_open().
*/
-static int __devinit bfin_wdt_probe(struct platform_device *pdev)
+static int bfin_wdt_probe(struct platform_device *pdev)
{
int ret;
@@ -379,7 +379,7 @@
* Unregisters the misc device. Actual device
* deinitialization is handled by bfin_wdt_close().
*/
-static int __devexit bfin_wdt_remove(struct platform_device *pdev)
+static int bfin_wdt_remove(struct platform_device *pdev)
{
misc_deregister(&bfin_wdt_miscdev);
return 0;
@@ -401,7 +401,7 @@
static struct platform_driver bfin_wdt_driver = {
.probe = bfin_wdt_probe,
- .remove = __devexit_p(bfin_wdt_remove),
+ .remove = bfin_wdt_remove,
.shutdown = bfin_wdt_shutdown,
.suspend = bfin_wdt_suspend,
.resume = bfin_wdt_resume,
diff --git a/drivers/watchdog/cpu5wdt.c b/drivers/watchdog/cpu5wdt.c
index 7e88839..cd87758 100644
--- a/drivers/watchdog/cpu5wdt.c
+++ b/drivers/watchdog/cpu5wdt.c
@@ -215,7 +215,7 @@
/* init/exit function */
-static int __devinit cpu5wdt_init(void)
+static int cpu5wdt_init(void)
{
unsigned int val;
int err;
@@ -256,12 +256,12 @@
return err;
}
-static int __devinit cpu5wdt_init_module(void)
+static int cpu5wdt_init_module(void)
{
return cpu5wdt_init();
}
-static void __devexit cpu5wdt_exit(void)
+static void cpu5wdt_exit(void)
{
if (cpu5wdt_device.queue) {
cpu5wdt_device.queue = 0;
@@ -274,7 +274,7 @@
}
-static void __devexit cpu5wdt_exit_module(void)
+static void cpu5wdt_exit_module(void)
{
cpu5wdt_exit();
}
diff --git a/drivers/watchdog/cpwd.c b/drivers/watchdog/cpwd.c
index 95b1b95..11d55ce 100644
--- a/drivers/watchdog/cpwd.c
+++ b/drivers/watchdog/cpwd.c
@@ -528,7 +528,7 @@
.llseek = no_llseek,
};
-static int __devinit cpwd_probe(struct platform_device *op)
+static int cpwd_probe(struct platform_device *op)
{
struct device_node *options;
const char *str_prop;
@@ -640,7 +640,7 @@
goto out;
}
-static int __devexit cpwd_remove(struct platform_device *op)
+static int cpwd_remove(struct platform_device *op)
{
struct cpwd *p = dev_get_drvdata(&op->dev);
int i;
@@ -684,7 +684,7 @@
.of_match_table = cpwd_match,
},
.probe = cpwd_probe,
- .remove = __devexit_p(cpwd_remove),
+ .remove = cpwd_remove,
};
module_platform_driver(cpwd_driver);
diff --git a/drivers/watchdog/da9052_wdt.c b/drivers/watchdog/da9052_wdt.c
index f7abbae..8be70d8 100644
--- a/drivers/watchdog/da9052_wdt.c
+++ b/drivers/watchdog/da9052_wdt.c
@@ -179,7 +179,7 @@
};
-static int __devinit da9052_wdt_probe(struct platform_device *pdev)
+static int da9052_wdt_probe(struct platform_device *pdev)
{
struct da9052 *da9052 = dev_get_drvdata(pdev->dev.parent);
struct da9052_wdt_data *driver_data;
@@ -224,7 +224,7 @@
return ret;
}
-static int __devexit da9052_wdt_remove(struct platform_device *pdev)
+static int da9052_wdt_remove(struct platform_device *pdev)
{
struct da9052_wdt_data *driver_data = dev_get_drvdata(&pdev->dev);
@@ -236,7 +236,7 @@
static struct platform_driver da9052_wdt_driver = {
.probe = da9052_wdt_probe,
- .remove = __devexit_p(da9052_wdt_remove),
+ .remove = da9052_wdt_remove,
.driver = {
.name = "da9052-watchdog",
},
diff --git a/drivers/watchdog/davinci_wdt.c b/drivers/watchdog/davinci_wdt.c
index c8c5c80..8791879 100644
--- a/drivers/watchdog/davinci_wdt.c
+++ b/drivers/watchdog/davinci_wdt.c
@@ -199,7 +199,7 @@
.fops = &davinci_wdt_fops,
};
-static int __devinit davinci_wdt_probe(struct platform_device *pdev)
+static int davinci_wdt_probe(struct platform_device *pdev)
{
int ret = 0, size;
struct device *dev = &pdev->dev;
@@ -248,7 +248,7 @@
return ret;
}
-static int __devexit davinci_wdt_remove(struct platform_device *pdev)
+static int davinci_wdt_remove(struct platform_device *pdev)
{
misc_deregister(&davinci_wdt_miscdev);
if (wdt_mem) {
@@ -268,7 +268,7 @@
.owner = THIS_MODULE,
},
.probe = davinci_wdt_probe,
- .remove = __devexit_p(davinci_wdt_remove),
+ .remove = davinci_wdt_remove,
};
module_platform_driver(platform_wdt_driver);
diff --git a/drivers/watchdog/dw_wdt.c b/drivers/watchdog/dw_wdt.c
index 06de121..a0eba3c 100644
--- a/drivers/watchdog/dw_wdt.c
+++ b/drivers/watchdog/dw_wdt.c
@@ -293,7 +293,7 @@
.minor = WATCHDOG_MINOR,
};
-static int __devinit dw_wdt_drv_probe(struct platform_device *pdev)
+static int dw_wdt_drv_probe(struct platform_device *pdev)
{
int ret;
struct resource *mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -333,7 +333,7 @@
return ret;
}
-static int __devexit dw_wdt_drv_remove(struct platform_device *pdev)
+static int dw_wdt_drv_remove(struct platform_device *pdev)
{
misc_deregister(&dw_wdt_miscdev);
@@ -345,7 +345,7 @@
static struct platform_driver dw_wdt_driver = {
.probe = dw_wdt_drv_probe,
- .remove = __devexit_p(dw_wdt_drv_remove),
+ .remove = dw_wdt_drv_remove,
.driver = {
.name = "dw_wdt",
.owner = THIS_MODULE,
diff --git a/drivers/watchdog/ep93xx_wdt.c b/drivers/watchdog/ep93xx_wdt.c
index 7705003..e057484 100644
--- a/drivers/watchdog/ep93xx_wdt.c
+++ b/drivers/watchdog/ep93xx_wdt.c
@@ -112,7 +112,7 @@
.ops = &ep93xx_wdt_ops,
};
-static int __devinit ep93xx_wdt_probe(struct platform_device *pdev)
+static int ep93xx_wdt_probe(struct platform_device *pdev)
{
struct resource *res;
unsigned long val;
@@ -156,7 +156,7 @@
return 0;
}
-static int __devexit ep93xx_wdt_remove(struct platform_device *pdev)
+static int ep93xx_wdt_remove(struct platform_device *pdev)
{
watchdog_unregister_device(&ep93xx_wdt_wdd);
return 0;
@@ -168,7 +168,7 @@
.name = "ep93xx-wdt",
},
.probe = ep93xx_wdt_probe,
- .remove = __devexit_p(ep93xx_wdt_remove),
+ .remove = ep93xx_wdt_remove,
};
module_platform_driver(ep93xx_wdt_driver);
diff --git a/drivers/watchdog/gef_wdt.c b/drivers/watchdog/gef_wdt.c
index 17f4cae..b9c5b58 100644
--- a/drivers/watchdog/gef_wdt.c
+++ b/drivers/watchdog/gef_wdt.c
@@ -262,7 +262,7 @@
};
-static int __devinit gef_wdt_probe(struct platform_device *dev)
+static int gef_wdt_probe(struct platform_device *dev)
{
int timeout = 10;
u32 freq;
@@ -285,7 +285,7 @@
return misc_register(&gef_wdt_miscdev);
}
-static int __devexit gef_wdt_remove(struct platform_device *dev)
+static int gef_wdt_remove(struct platform_device *dev)
{
misc_deregister(&gef_wdt_miscdev);
diff --git a/drivers/watchdog/geodewdt.c b/drivers/watchdog/geodewdt.c
index dc563b6..fcd599d 100644
--- a/drivers/watchdog/geodewdt.c
+++ b/drivers/watchdog/geodewdt.c
@@ -215,7 +215,7 @@
.fops = &geodewdt_fops,
};
-static int __devinit geodewdt_probe(struct platform_device *dev)
+static int geodewdt_probe(struct platform_device *dev)
{
int ret;
@@ -243,7 +243,7 @@
return ret;
}
-static int __devexit geodewdt_remove(struct platform_device *dev)
+static int geodewdt_remove(struct platform_device *dev)
{
misc_deregister(&geodewdt_miscdev);
return 0;
@@ -256,7 +256,7 @@
static struct platform_driver geodewdt_driver = {
.probe = geodewdt_probe,
- .remove = __devexit_p(geodewdt_remove),
+ .remove = geodewdt_remove,
.shutdown = geodewdt_shutdown,
.driver = {
.owner = THIS_MODULE,
diff --git a/drivers/watchdog/hpwdt.c b/drivers/watchdog/hpwdt.c
index ae60406..8717255 100644
--- a/drivers/watchdog/hpwdt.c
+++ b/drivers/watchdog/hpwdt.c
@@ -212,7 +212,7 @@
* 0 : SUCCESS
* <0 : FAILURE
*/
-static int __devinit cru_detect(unsigned long map_entry,
+static int cru_detect(unsigned long map_entry,
unsigned long map_offset)
{
void *bios32_map;
@@ -268,7 +268,7 @@
/*
* bios_checksum
*/
-static int __devinit bios_checksum(const char __iomem *ptr, int len)
+static int bios_checksum(const char __iomem *ptr, int len)
{
char sum = 0;
int i;
@@ -293,7 +293,7 @@
* 0 : SUCCESS
* <0 : FAILURE
*/
-static int __devinit bios32_present(const char __iomem *p)
+static int bios32_present(const char __iomem *p)
{
struct bios32_service_dir *bios_32_ptr;
int length;
@@ -323,7 +323,7 @@
return -ENODEV;
}
-static int __devinit detect_cru_service(void)
+static int detect_cru_service(void)
{
char __iomem *p, *q;
int rc = -1;
@@ -395,7 +395,7 @@
* This function checks whether or not a SMBIOS/DMI record is
* the 64bit CRU info or not
*/
-static void __devinit dmi_find_cru(const struct dmi_header *dm, void *dummy)
+static void dmi_find_cru(const struct dmi_header *dm, void *dummy)
{
struct smbios_cru64_info *smbios_cru64_ptr;
unsigned long cru_physical_address;
@@ -414,7 +414,7 @@
}
}
-static int __devinit detect_cru_service(void)
+static int detect_cru_service(void)
{
cru_rom_addr = NULL;
@@ -647,7 +647,7 @@
#ifdef CONFIG_HPWDT_NMI_DECODING
#ifdef CONFIG_X86_LOCAL_APIC
-static void __devinit hpwdt_check_nmi_decoding(struct pci_dev *dev)
+static void hpwdt_check_nmi_decoding(struct pci_dev *dev)
{
/*
* If nmi_watchdog is turned off then we can turn on
@@ -656,7 +656,7 @@
hpwdt_nmi_decoding = 1;
}
#else
-static void __devinit hpwdt_check_nmi_decoding(struct pci_dev *dev)
+static void hpwdt_check_nmi_decoding(struct pci_dev *dev)
{
dev_warn(&dev->dev, "NMI decoding is disabled. "
"Your kernel does not support a NMI Watchdog.\n");
@@ -671,7 +671,7 @@
* This check is independent of architecture and needs to be made for
* any ProLiant system.
*/
-static void __devinit dmi_find_icru(const struct dmi_header *dm, void *dummy)
+static void dmi_find_icru(const struct dmi_header *dm, void *dummy)
{
struct smbios_proliant_info *smbios_proliant_ptr;
@@ -682,7 +682,7 @@
}
}
-static int __devinit hpwdt_init_nmi_decoding(struct pci_dev *dev)
+static int hpwdt_init_nmi_decoding(struct pci_dev *dev)
{
int retval;
@@ -762,11 +762,11 @@
iounmap(cru_rom_addr);
}
#else /* !CONFIG_HPWDT_NMI_DECODING */
-static void __devinit hpwdt_check_nmi_decoding(struct pci_dev *dev)
+static void hpwdt_check_nmi_decoding(struct pci_dev *dev)
{
}
-static int __devinit hpwdt_init_nmi_decoding(struct pci_dev *dev)
+static int hpwdt_init_nmi_decoding(struct pci_dev *dev)
{
return 0;
}
@@ -776,7 +776,7 @@
}
#endif /* CONFIG_HPWDT_NMI_DECODING */
-static int __devinit hpwdt_init_one(struct pci_dev *dev,
+static int hpwdt_init_one(struct pci_dev *dev,
const struct pci_device_id *ent)
{
int retval;
@@ -848,7 +848,7 @@
return retval;
}
-static void __devexit hpwdt_exit(struct pci_dev *dev)
+static void hpwdt_exit(struct pci_dev *dev)
{
if (!nowayout)
hpwdt_stop();
@@ -863,7 +863,7 @@
.name = "hpwdt",
.id_table = hpwdt_devices,
.probe = hpwdt_init_one,
- .remove = __devexit_p(hpwdt_exit),
+ .remove = hpwdt_exit,
};
MODULE_AUTHOR("Tom Mingarelli");
diff --git a/drivers/watchdog/i6300esb.c b/drivers/watchdog/i6300esb.c
index 276877d..2b2ea13 100644
--- a/drivers/watchdog/i6300esb.c
+++ b/drivers/watchdog/i6300esb.c
@@ -344,7 +344,7 @@
* Init & exit routines
*/
-static unsigned char __devinit esb_getdevice(struct pci_dev *pdev)
+static unsigned char esb_getdevice(struct pci_dev *pdev)
{
if (pci_enable_device(pdev)) {
pr_err("failed to enable device\n");
@@ -375,7 +375,7 @@
return 0;
}
-static void __devinit esb_initdevice(void)
+static void esb_initdevice(void)
{
u8 val1;
u16 val2;
@@ -416,7 +416,7 @@
esb_timer_set_heartbeat(heartbeat);
}
-static int __devinit esb_probe(struct pci_dev *pdev,
+static int esb_probe(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
int ret;
@@ -465,7 +465,7 @@
return ret;
}
-static void __devexit esb_remove(struct pci_dev *pdev)
+static void esb_remove(struct pci_dev *pdev)
{
/* Stop the timer before we leave */
if (!nowayout)
@@ -488,7 +488,7 @@
.name = ESB_MODULE_NAME,
.id_table = esb_pci_tbl,
.probe = esb_probe,
- .remove = __devexit_p(esb_remove),
+ .remove = esb_remove,
.shutdown = esb_shutdown,
};
diff --git a/drivers/watchdog/iTCO_wdt.c b/drivers/watchdog/iTCO_wdt.c
index 545d387..6130321 100644
--- a/drivers/watchdog/iTCO_wdt.c
+++ b/drivers/watchdog/iTCO_wdt.c
@@ -364,7 +364,7 @@
* Init & exit routines
*/
-static void __devexit iTCO_wdt_cleanup(void)
+static void iTCO_wdt_cleanup(void)
{
/* Stop the timer before we leave */
if (!nowayout)
@@ -390,7 +390,7 @@
iTCO_wdt_private.gcs = NULL;
}
-static int __devinit iTCO_wdt_probe(struct platform_device *dev)
+static int iTCO_wdt_probe(struct platform_device *dev)
{
int ret = -ENODEV;
unsigned long val32;
@@ -533,7 +533,7 @@
return ret;
}
-static int __devexit iTCO_wdt_remove(struct platform_device *dev)
+static int iTCO_wdt_remove(struct platform_device *dev)
{
if (iTCO_wdt_private.tco_res || iTCO_wdt_private.smi_res)
iTCO_wdt_cleanup();
@@ -548,7 +548,7 @@
static struct platform_driver iTCO_wdt_driver = {
.probe = iTCO_wdt_probe,
- .remove = __devexit_p(iTCO_wdt_remove),
+ .remove = iTCO_wdt_remove,
.shutdown = iTCO_wdt_shutdown,
.driver = {
.owner = THIS_MODULE,
diff --git a/drivers/watchdog/ib700wdt.c b/drivers/watchdog/ib700wdt.c
index 184c0bf..eb6b5cc 100644
--- a/drivers/watchdog/ib700wdt.c
+++ b/drivers/watchdog/ib700wdt.c
@@ -277,7 +277,7 @@
* Init & exit routines
*/
-static int __devinit ibwdt_probe(struct platform_device *dev)
+static int ibwdt_probe(struct platform_device *dev)
{
int res;
@@ -319,7 +319,7 @@
return res;
}
-static int __devexit ibwdt_remove(struct platform_device *dev)
+static int ibwdt_remove(struct platform_device *dev)
{
misc_deregister(&ibwdt_miscdev);
release_region(WDT_START, 1);
@@ -337,7 +337,7 @@
static struct platform_driver ibwdt_driver = {
.probe = ibwdt_probe,
- .remove = __devexit_p(ibwdt_remove),
+ .remove = ibwdt_remove,
.shutdown = ibwdt_shutdown,
.driver = {
.owner = THIS_MODULE,
diff --git a/drivers/watchdog/ie6xx_wdt.c b/drivers/watchdog/ie6xx_wdt.c
index 8f541b9..e24ef6a 100644
--- a/drivers/watchdog/ie6xx_wdt.c
+++ b/drivers/watchdog/ie6xx_wdt.c
@@ -225,7 +225,7 @@
.release = single_release,
};
-static void __devinit ie6xx_wdt_debugfs_init(void)
+static void ie6xx_wdt_debugfs_init(void)
{
/* /sys/kernel/debug/ie6xx_wdt */
ie6xx_wdt_data.debugfs = debugfs_create_file("ie6xx_wdt",
@@ -238,7 +238,7 @@
}
#else
-static void __devinit ie6xx_wdt_debugfs_init(void)
+static void ie6xx_wdt_debugfs_init(void)
{
}
@@ -247,7 +247,7 @@
}
#endif
-static int __devinit ie6xx_wdt_probe(struct platform_device *pdev)
+static int ie6xx_wdt_probe(struct platform_device *pdev)
{
struct resource *res;
u8 wdtlr;
@@ -295,7 +295,7 @@
return ret;
}
-static int __devexit ie6xx_wdt_remove(struct platform_device *pdev)
+static int ie6xx_wdt_remove(struct platform_device *pdev)
{
struct resource *res;
@@ -311,7 +311,7 @@
static struct platform_driver ie6xx_wdt_driver = {
.probe = ie6xx_wdt_probe,
- .remove = __devexit_p(ie6xx_wdt_remove),
+ .remove = ie6xx_wdt_remove,
.driver = {
.name = DRIVER_NAME,
.owner = THIS_MODULE,
diff --git a/drivers/watchdog/jz4740_wdt.c b/drivers/watchdog/jz4740_wdt.c
index 978615e..a61408f 100644
--- a/drivers/watchdog/jz4740_wdt.c
+++ b/drivers/watchdog/jz4740_wdt.c
@@ -144,7 +144,7 @@
.set_timeout = jz4740_wdt_set_timeout,
};
-static int __devinit jz4740_wdt_probe(struct platform_device *pdev)
+static int jz4740_wdt_probe(struct platform_device *pdev)
{
struct jz4740_wdt_drvdata *drvdata;
struct watchdog_device *jz4740_wdt;
@@ -197,7 +197,7 @@
return ret;
}
-static int __devexit jz4740_wdt_remove(struct platform_device *pdev)
+static int jz4740_wdt_remove(struct platform_device *pdev)
{
struct jz4740_wdt_drvdata *drvdata = platform_get_drvdata(pdev);
@@ -210,7 +210,7 @@
static struct platform_driver jz4740_wdt_driver = {
.probe = jz4740_wdt_probe,
- .remove = __devexit_p(jz4740_wdt_remove),
+ .remove = jz4740_wdt_remove,
.driver = {
.name = "jz4740-wdt",
.owner = THIS_MODULE,
diff --git a/drivers/watchdog/ks8695_wdt.c b/drivers/watchdog/ks8695_wdt.c
index c1a4d3b..dce9ecf 100644
--- a/drivers/watchdog/ks8695_wdt.c
+++ b/drivers/watchdog/ks8695_wdt.c
@@ -235,7 +235,7 @@
.fops = &ks8695wdt_fops,
};
-static int __devinit ks8695wdt_probe(struct platform_device *pdev)
+static int ks8695wdt_probe(struct platform_device *pdev)
{
int res;
@@ -252,7 +252,7 @@
return 0;
}
-static int __devexit ks8695wdt_remove(struct platform_device *pdev)
+static int ks8695wdt_remove(struct platform_device *pdev)
{
int res;
@@ -290,7 +290,7 @@
static struct platform_driver ks8695wdt_driver = {
.probe = ks8695wdt_probe,
- .remove = __devexit_p(ks8695wdt_remove),
+ .remove = ks8695wdt_remove,
.shutdown = ks8695wdt_shutdown,
.suspend = ks8695wdt_suspend,
.resume = ks8695wdt_resume,
diff --git a/drivers/watchdog/lantiq_wdt.c b/drivers/watchdog/lantiq_wdt.c
index 2e74c3a..79fe01b 100644
--- a/drivers/watchdog/lantiq_wdt.c
+++ b/drivers/watchdog/lantiq_wdt.c
@@ -186,7 +186,7 @@
.fops = <q_wdt_fops,
};
-static int __devinit
+static int
ltq_wdt_probe(struct platform_device *pdev)
{
struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -220,7 +220,7 @@
return misc_register(<q_wdt_miscdev);
}
-static int __devexit
+static int
ltq_wdt_remove(struct platform_device *pdev)
{
misc_deregister(<q_wdt_miscdev);
@@ -236,7 +236,7 @@
static struct platform_driver ltq_wdt_driver = {
.probe = ltq_wdt_probe,
- .remove = __devexit_p(ltq_wdt_remove),
+ .remove = ltq_wdt_remove,
.driver = {
.name = "wdt",
.owner = THIS_MODULE,
diff --git a/drivers/watchdog/max63xx_wdt.c b/drivers/watchdog/max63xx_wdt.c
index 8f4a74e..773c661 100644
--- a/drivers/watchdog/max63xx_wdt.c
+++ b/drivers/watchdog/max63xx_wdt.c
@@ -174,7 +174,7 @@
.ops = &max63xx_wdt_ops,
};
-static int __devinit max63xx_wdt_probe(struct platform_device *pdev)
+static int max63xx_wdt_probe(struct platform_device *pdev)
{
struct resource *wdt_mem;
struct max63xx_timeout *table;
@@ -209,7 +209,7 @@
return watchdog_register_device(&max63xx_wdt_dev);
}
-static int __devexit max63xx_wdt_remove(struct platform_device *pdev)
+static int max63xx_wdt_remove(struct platform_device *pdev)
{
watchdog_unregister_device(&max63xx_wdt_dev);
return 0;
@@ -228,7 +228,7 @@
static struct platform_driver max63xx_wdt_driver = {
.probe = max63xx_wdt_probe,
- .remove = __devexit_p(max63xx_wdt_remove),
+ .remove = max63xx_wdt_remove,
.id_table = max63xx_id_table,
.driver = {
.name = "max63xx_wdt",
diff --git a/drivers/watchdog/mixcomwd.c b/drivers/watchdog/mixcomwd.c
index 37e4b52..97d62ee 100644
--- a/drivers/watchdog/mixcomwd.c
+++ b/drivers/watchdog/mixcomwd.c
@@ -73,7 +73,7 @@
static struct {
int ioport;
int id;
-} mixcomwd_io_info[] __devinitdata = {
+} mixcomwd_io_info[] = {
/* The Mixcom cards */
{0x0d90, MIXCOM_ID},
{0x0e90, MIXCOM_ID},
diff --git a/drivers/watchdog/mpc8xxx_wdt.c b/drivers/watchdog/mpc8xxx_wdt.c
index e6a038a..da27520 100644
--- a/drivers/watchdog/mpc8xxx_wdt.c
+++ b/drivers/watchdog/mpc8xxx_wdt.c
@@ -188,7 +188,7 @@
};
static const struct of_device_id mpc8xxx_wdt_match[];
-static int __devinit mpc8xxx_wdt_probe(struct platform_device *ofdev)
+static int mpc8xxx_wdt_probe(struct platform_device *ofdev)
{
int ret;
const struct of_device_id *match;
@@ -245,7 +245,7 @@
return ret;
}
-static int __devexit mpc8xxx_wdt_remove(struct platform_device *ofdev)
+static int mpc8xxx_wdt_remove(struct platform_device *ofdev)
{
mpc8xxx_wdt_pr_warn("watchdog removed");
del_timer_sync(&wdt_timer);
@@ -281,7 +281,7 @@
static struct platform_driver mpc8xxx_wdt_driver = {
.probe = mpc8xxx_wdt_probe,
- .remove = __devexit_p(mpc8xxx_wdt_remove),
+ .remove = mpc8xxx_wdt_remove,
.driver = {
.name = "mpc8xxx_wdt",
.owner = THIS_MODULE,
diff --git a/drivers/watchdog/mpcore_wdt.c b/drivers/watchdog/mpcore_wdt.c
index 7c741dc..a84eb55 100644
--- a/drivers/watchdog/mpcore_wdt.c
+++ b/drivers/watchdog/mpcore_wdt.c
@@ -327,7 +327,7 @@
.fops = &mpcore_wdt_fops,
};
-static int __devinit mpcore_wdt_probe(struct platform_device *pdev)
+static int mpcore_wdt_probe(struct platform_device *pdev)
{
struct mpcore_wdt *wdt;
struct resource *res;
@@ -378,7 +378,7 @@
return 0;
}
-static int __devexit mpcore_wdt_remove(struct platform_device *pdev)
+static int mpcore_wdt_remove(struct platform_device *pdev)
{
platform_set_drvdata(pdev, NULL);
@@ -415,7 +415,7 @@
static struct platform_driver mpcore_wdt_driver = {
.probe = mpcore_wdt_probe,
- .remove = __devexit_p(mpcore_wdt_remove),
+ .remove = mpcore_wdt_remove,
.suspend = mpcore_wdt_suspend,
.resume = mpcore_wdt_resume,
.shutdown = mpcore_wdt_shutdown,
diff --git a/drivers/watchdog/mtx-1_wdt.c b/drivers/watchdog/mtx-1_wdt.c
index c29e31d..14dab6f 100644
--- a/drivers/watchdog/mtx-1_wdt.c
+++ b/drivers/watchdog/mtx-1_wdt.c
@@ -204,7 +204,7 @@
};
-static int __devinit mtx1_wdt_probe(struct platform_device *pdev)
+static int mtx1_wdt_probe(struct platform_device *pdev)
{
int ret;
@@ -233,7 +233,7 @@
return 0;
}
-static int __devexit mtx1_wdt_remove(struct platform_device *pdev)
+static int mtx1_wdt_remove(struct platform_device *pdev)
{
/* FIXME: do we need to lock this test ? */
if (mtx1_wdt_device.queue) {
@@ -248,7 +248,7 @@
static struct platform_driver mtx1_wdt_driver = {
.probe = mtx1_wdt_probe,
- .remove = __devexit_p(mtx1_wdt_remove),
+ .remove = mtx1_wdt_remove,
.driver.name = "mtx1-wdt",
.driver.owner = THIS_MODULE,
};
diff --git a/drivers/watchdog/mv64x60_wdt.c b/drivers/watchdog/mv64x60_wdt.c
index c53d025..c7fb878 100644
--- a/drivers/watchdog/mv64x60_wdt.c
+++ b/drivers/watchdog/mv64x60_wdt.c
@@ -253,7 +253,7 @@
.fops = &mv64x60_wdt_fops,
};
-static int __devinit mv64x60_wdt_probe(struct platform_device *dev)
+static int mv64x60_wdt_probe(struct platform_device *dev)
{
struct mv64x60_wdt_pdata *pdata = dev->dev.platform_data;
struct resource *r;
@@ -287,7 +287,7 @@
return misc_register(&mv64x60_wdt_miscdev);
}
-static int __devexit mv64x60_wdt_remove(struct platform_device *dev)
+static int mv64x60_wdt_remove(struct platform_device *dev)
{
misc_deregister(&mv64x60_wdt_miscdev);
@@ -300,7 +300,7 @@
static struct platform_driver mv64x60_wdt_driver = {
.probe = mv64x60_wdt_probe,
- .remove = __devexit_p(mv64x60_wdt_remove),
+ .remove = mv64x60_wdt_remove,
.driver = {
.owner = THIS_MODULE,
.name = MV64x60_WDT_NAME,
diff --git a/drivers/watchdog/nuc900_wdt.c b/drivers/watchdog/nuc900_wdt.c
index ea4c744..04c45a1 100644
--- a/drivers/watchdog/nuc900_wdt.c
+++ b/drivers/watchdog/nuc900_wdt.c
@@ -242,7 +242,7 @@
.fops = &nuc900wdt_fops,
};
-static int __devinit nuc900wdt_probe(struct platform_device *pdev)
+static int nuc900wdt_probe(struct platform_device *pdev)
{
int ret = 0;
@@ -309,7 +309,7 @@
return ret;
}
-static int __devexit nuc900wdt_remove(struct platform_device *pdev)
+static int nuc900wdt_remove(struct platform_device *pdev)
{
misc_deregister(&nuc900wdt_miscdev);
@@ -328,7 +328,7 @@
static struct platform_driver nuc900wdt_driver = {
.probe = nuc900wdt_probe,
- .remove = __devexit_p(nuc900wdt_remove),
+ .remove = nuc900wdt_remove,
.driver = {
.name = "nuc900-wdt",
.owner = THIS_MODULE,
diff --git a/drivers/watchdog/nv_tco.c b/drivers/watchdog/nv_tco.c
index 6bbb9ef..59cf19e 100644
--- a/drivers/watchdog/nv_tco.c
+++ b/drivers/watchdog/nv_tco.c
@@ -302,7 +302,7 @@
* Init & exit routines
*/
-static unsigned char __devinit nv_tco_getdevice(void)
+static unsigned char nv_tco_getdevice(void)
{
struct pci_dev *dev = NULL;
u32 val;
@@ -376,7 +376,7 @@
return 0;
}
-static int __devinit nv_tco_init(struct platform_device *dev)
+static int nv_tco_init(struct platform_device *dev)
{
int ret;
@@ -423,7 +423,7 @@
return ret;
}
-static void __devexit nv_tco_cleanup(void)
+static void nv_tco_cleanup(void)
{
u32 val;
@@ -445,7 +445,7 @@
release_region(tcobase, 0x10);
}
-static int __devexit nv_tco_remove(struct platform_device *dev)
+static int nv_tco_remove(struct platform_device *dev)
{
if (tcobase)
nv_tco_cleanup();
@@ -468,7 +468,7 @@
static struct platform_driver nv_tco_driver = {
.probe = nv_tco_init,
- .remove = __devexit_p(nv_tco_remove),
+ .remove = nv_tco_remove,
.shutdown = nv_tco_shutdown,
.driver = {
.owner = THIS_MODULE,
diff --git a/drivers/watchdog/of_xilinx_wdt.c b/drivers/watchdog/of_xilinx_wdt.c
index 294fb4e..2761ddb 100644
--- a/drivers/watchdog/of_xilinx_wdt.c
+++ b/drivers/watchdog/of_xilinx_wdt.c
@@ -289,7 +289,7 @@
.fops = &xwdt_fops,
};
-static int __devinit xwdt_probe(struct platform_device *pdev)
+static int xwdt_probe(struct platform_device *pdev)
{
int rc;
u32 *tmptr;
@@ -383,7 +383,7 @@
return rc;
}
-static int __devexit xwdt_remove(struct platform_device *dev)
+static int xwdt_remove(struct platform_device *dev)
{
misc_deregister(&xwdt_miscdev);
iounmap(xdev.base);
@@ -393,7 +393,7 @@
}
/* Match table for of_platform binding */
-static struct of_device_id __devinitdata xwdt_of_match[] = {
+static struct of_device_id xwdt_of_match[] = {
{ .compatible = "xlnx,xps-timebase-wdt-1.01.a", },
{},
};
@@ -401,7 +401,7 @@
static struct platform_driver xwdt_driver = {
.probe = xwdt_probe,
- .remove = __devexit_p(xwdt_remove),
+ .remove = xwdt_remove,
.driver = {
.owner = THIS_MODULE,
.name = WATCHDOG_NAME,
diff --git a/drivers/watchdog/omap_wdt.c b/drivers/watchdog/omap_wdt.c
index f5db18db..d8da516 100644
--- a/drivers/watchdog/omap_wdt.c
+++ b/drivers/watchdog/omap_wdt.c
@@ -264,7 +264,7 @@
.llseek = no_llseek,
};
-static int __devinit omap_wdt_probe(struct platform_device *pdev)
+static int omap_wdt_probe(struct platform_device *pdev)
{
struct resource *res, *mem;
struct omap_wdt_dev *wdev;
@@ -359,7 +359,7 @@
}
}
-static int __devexit omap_wdt_remove(struct platform_device *pdev)
+static int omap_wdt_remove(struct platform_device *pdev)
{
struct omap_wdt_dev *wdev = platform_get_drvdata(pdev);
struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -426,7 +426,7 @@
static struct platform_driver omap_wdt_driver = {
.probe = omap_wdt_probe,
- .remove = __devexit_p(omap_wdt_remove),
+ .remove = omap_wdt_remove,
.shutdown = omap_wdt_shutdown,
.suspend = omap_wdt_suspend,
.resume = omap_wdt_resume,
diff --git a/drivers/watchdog/orion_wdt.c b/drivers/watchdog/orion_wdt.c
index c20f96b..0478b00 100644
--- a/drivers/watchdog/orion_wdt.c
+++ b/drivers/watchdog/orion_wdt.c
@@ -142,7 +142,7 @@
.ops = &orion_wdt_ops,
};
-static int __devinit orion_wdt_probe(struct platform_device *pdev)
+static int orion_wdt_probe(struct platform_device *pdev)
{
struct resource *res;
int ret;
@@ -181,7 +181,7 @@
return 0;
}
-static int __devexit orion_wdt_remove(struct platform_device *pdev)
+static int orion_wdt_remove(struct platform_device *pdev)
{
watchdog_unregister_device(&orion_wdt);
clk_disable_unprepare(clk);
@@ -193,7 +193,7 @@
orion_wdt_stop(&orion_wdt);
}
-static const struct of_device_id orion_wdt_of_match_table[] __devinitdata = {
+static const struct of_device_id orion_wdt_of_match_table[] = {
{ .compatible = "marvell,orion-wdt", },
{},
};
@@ -201,7 +201,7 @@
static struct platform_driver orion_wdt_driver = {
.probe = orion_wdt_probe,
- .remove = __devexit_p(orion_wdt_remove),
+ .remove = orion_wdt_remove,
.shutdown = orion_wdt_shutdown,
.driver = {
.owner = THIS_MODULE,
diff --git a/drivers/watchdog/pcwd.c b/drivers/watchdog/pcwd.c
index 75694cf..33e49a7 100644
--- a/drivers/watchdog/pcwd.c
+++ b/drivers/watchdog/pcwd.c
@@ -801,7 +801,7 @@
* The initial rate is once per second at board start up, then twice
* per second for normal operation.
*/
-static int __devinit pcwd_isa_match(struct device *dev, unsigned int id)
+static int pcwd_isa_match(struct device *dev, unsigned int id)
{
int base_addr = pcwd_ioports[id];
int port0, last_port0; /* Reg 0, in case it's REV A */
@@ -846,7 +846,7 @@
return retval;
}
-static int __devinit pcwd_isa_probe(struct device *dev, unsigned int id)
+static int pcwd_isa_probe(struct device *dev, unsigned int id)
{
int ret;
@@ -949,7 +949,7 @@
return ret;
}
-static int __devexit pcwd_isa_remove(struct device *dev, unsigned int id)
+static int pcwd_isa_remove(struct device *dev, unsigned int id)
{
if (debug >= DEBUG)
pr_debug("pcwd_isa_remove id=%d\n", id);
@@ -984,7 +984,7 @@
static struct isa_driver pcwd_isa_driver = {
.match = pcwd_isa_match,
.probe = pcwd_isa_probe,
- .remove = __devexit_p(pcwd_isa_remove),
+ .remove = pcwd_isa_remove,
.shutdown = pcwd_isa_shutdown,
.driver = {
.owner = THIS_MODULE,
diff --git a/drivers/watchdog/pcwd_pci.c b/drivers/watchdog/pcwd_pci.c
index ee6900d..7890f84 100644
--- a/drivers/watchdog/pcwd_pci.c
+++ b/drivers/watchdog/pcwd_pci.c
@@ -682,7 +682,7 @@
* Init & exit routines
*/
-static int __devinit pcipcwd_card_init(struct pci_dev *pdev,
+static int pcipcwd_card_init(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
int ret = -EIO;
@@ -785,7 +785,7 @@
return ret;
}
-static void __devexit pcipcwd_card_exit(struct pci_dev *pdev)
+static void pcipcwd_card_exit(struct pci_dev *pdev)
{
/* Stop the timer before we leave */
if (!nowayout)
@@ -812,7 +812,7 @@
.name = WATCHDOG_NAME,
.id_table = pcipcwd_pci_tbl,
.probe = pcipcwd_card_init,
- .remove = __devexit_p(pcipcwd_card_exit),
+ .remove = pcipcwd_card_exit,
};
module_pci_driver(pcipcwd_driver);
diff --git a/drivers/watchdog/pnx4008_wdt.c b/drivers/watchdog/pnx4008_wdt.c
index 87722e1..dcba5da 100644
--- a/drivers/watchdog/pnx4008_wdt.c
+++ b/drivers/watchdog/pnx4008_wdt.c
@@ -146,7 +146,7 @@
.max_timeout = MAX_HEARTBEAT,
};
-static int __devinit pnx4008_wdt_probe(struct platform_device *pdev)
+static int pnx4008_wdt_probe(struct platform_device *pdev)
{
struct resource *r;
int ret = 0;
@@ -192,7 +192,7 @@
return ret;
}
-static int __devexit pnx4008_wdt_remove(struct platform_device *pdev)
+static int pnx4008_wdt_remove(struct platform_device *pdev)
{
watchdog_unregister_device(&pnx4008_wdd);
@@ -217,7 +217,7 @@
.of_match_table = of_match_ptr(pnx4008_wdt_match),
},
.probe = pnx4008_wdt_probe,
- .remove = __devexit_p(pnx4008_wdt_remove),
+ .remove = pnx4008_wdt_remove,
};
module_platform_driver(platform_wdt_driver);
diff --git a/drivers/watchdog/rc32434_wdt.c b/drivers/watchdog/rc32434_wdt.c
index 547353a..f78bc00 100644
--- a/drivers/watchdog/rc32434_wdt.c
+++ b/drivers/watchdog/rc32434_wdt.c
@@ -260,7 +260,7 @@
.fops = &rc32434_wdt_fops,
};
-static int __devinit rc32434_wdt_probe(struct platform_device *pdev)
+static int rc32434_wdt_probe(struct platform_device *pdev)
{
int ret;
struct resource *r;
@@ -306,7 +306,7 @@
return ret;
}
-static int __devexit rc32434_wdt_remove(struct platform_device *pdev)
+static int rc32434_wdt_remove(struct platform_device *pdev)
{
misc_deregister(&rc32434_wdt_miscdev);
iounmap(wdt_reg);
@@ -320,7 +320,7 @@
static struct platform_driver rc32434_wdt_driver = {
.probe = rc32434_wdt_probe,
- .remove = __devexit_p(rc32434_wdt_remove),
+ .remove = rc32434_wdt_remove,
.shutdown = rc32434_wdt_shutdown,
.driver = {
.name = "rc32434_wdt",
diff --git a/drivers/watchdog/rdc321x_wdt.c b/drivers/watchdog/rdc321x_wdt.c
index 042ccc5..b0f116c 100644
--- a/drivers/watchdog/rdc321x_wdt.c
+++ b/drivers/watchdog/rdc321x_wdt.c
@@ -225,7 +225,7 @@
.fops = &rdc321x_wdt_fops,
};
-static int __devinit rdc321x_wdt_probe(struct platform_device *pdev)
+static int rdc321x_wdt_probe(struct platform_device *pdev)
{
int err;
struct resource *r;
@@ -272,7 +272,7 @@
return 0;
}
-static int __devexit rdc321x_wdt_remove(struct platform_device *pdev)
+static int rdc321x_wdt_remove(struct platform_device *pdev)
{
if (rdc321x_wdt_device.queue) {
rdc321x_wdt_device.queue = 0;
@@ -286,7 +286,7 @@
static struct platform_driver rdc321x_wdt_driver = {
.probe = rdc321x_wdt_probe,
- .remove = __devexit_p(rdc321x_wdt_remove),
+ .remove = rdc321x_wdt_remove,
.driver = {
.owner = THIS_MODULE,
.name = "rdc321x-wdt",
diff --git a/drivers/watchdog/riowd.c b/drivers/watchdog/riowd.c
index 49e1b1c..0040451 100644
--- a/drivers/watchdog/riowd.c
+++ b/drivers/watchdog/riowd.c
@@ -174,7 +174,7 @@
.fops = &riowd_fops
};
-static int __devinit riowd_probe(struct platform_device *op)
+static int riowd_probe(struct platform_device *op)
{
struct riowd *p;
int err = -EINVAL;
@@ -220,7 +220,7 @@
return err;
}
-static int __devexit riowd_remove(struct platform_device *op)
+static int riowd_remove(struct platform_device *op)
{
struct riowd *p = dev_get_drvdata(&op->dev);
@@ -246,7 +246,7 @@
.of_match_table = riowd_match,
},
.probe = riowd_probe,
- .remove = __devexit_p(riowd_remove),
+ .remove = riowd_remove,
};
module_platform_driver(riowd_driver);
diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c
index 9245b4d..b0dab10 100644
--- a/drivers/watchdog/s3c2410_wdt.c
+++ b/drivers/watchdog/s3c2410_wdt.c
@@ -303,7 +303,7 @@
}
#endif
-static int __devinit s3c2410wdt_probe(struct platform_device *pdev)
+static int s3c2410wdt_probe(struct platform_device *pdev)
{
struct device *dev;
unsigned int wtcon;
@@ -437,7 +437,7 @@
return ret;
}
-static int __devexit s3c2410wdt_remove(struct platform_device *dev)
+static int s3c2410wdt_remove(struct platform_device *dev)
{
watchdog_unregister_device(&s3c2410_wdd);
@@ -508,7 +508,7 @@
static struct platform_driver s3c2410wdt_driver = {
.probe = s3c2410wdt_probe,
- .remove = __devexit_p(s3c2410wdt_remove),
+ .remove = s3c2410wdt_remove,
.shutdown = s3c2410wdt_shutdown,
.suspend = s3c2410wdt_suspend,
.resume = s3c2410wdt_resume,
diff --git a/drivers/watchdog/sch311x_wdt.c b/drivers/watchdog/sch311x_wdt.c
index 9681ada..af7b136 100644
--- a/drivers/watchdog/sch311x_wdt.c
+++ b/drivers/watchdog/sch311x_wdt.c
@@ -356,7 +356,7 @@
* Init & exit routines
*/
-static int __devinit sch311x_wdt_probe(struct platform_device *pdev)
+static int sch311x_wdt_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
int err;
@@ -429,7 +429,7 @@
return err;
}
-static int __devexit sch311x_wdt_remove(struct platform_device *pdev)
+static int sch311x_wdt_remove(struct platform_device *pdev)
{
/* Stop the timer before we leave */
if (!nowayout)
@@ -451,7 +451,7 @@
static struct platform_driver sch311x_wdt_driver = {
.probe = sch311x_wdt_probe,
- .remove = __devexit_p(sch311x_wdt_remove),
+ .remove = sch311x_wdt_remove,
.shutdown = sch311x_wdt_shutdown,
.driver = {
.owner = THIS_MODULE,
diff --git a/drivers/watchdog/shwdt.c b/drivers/watchdog/shwdt.c
index e5b59be..6a89e40 100644
--- a/drivers/watchdog/shwdt.c
+++ b/drivers/watchdog/shwdt.c
@@ -217,7 +217,7 @@
.ops = &sh_wdt_ops,
};
-static int __devinit sh_wdt_probe(struct platform_device *pdev)
+static int sh_wdt_probe(struct platform_device *pdev)
{
struct sh_wdt *wdt;
struct resource *res;
@@ -298,7 +298,7 @@
return rc;
}
-static int __devexit sh_wdt_remove(struct platform_device *pdev)
+static int sh_wdt_remove(struct platform_device *pdev)
{
struct sh_wdt *wdt = platform_get_drvdata(pdev);
@@ -324,7 +324,7 @@
},
.probe = sh_wdt_probe,
- .remove = __devexit_p(sh_wdt_remove),
+ .remove = sh_wdt_remove,
.shutdown = sh_wdt_shutdown,
};
diff --git a/drivers/watchdog/sp5100_tco.c b/drivers/watchdog/sp5100_tco.c
index ae5e82c..b387681 100644
--- a/drivers/watchdog/sp5100_tco.c
+++ b/drivers/watchdog/sp5100_tco.c
@@ -271,7 +271,7 @@
* Init & exit routines
*/
-static unsigned char __devinit sp5100_tco_setupdevice(void)
+static unsigned char sp5100_tco_setupdevice(void)
{
struct pci_dev *dev = NULL;
u32 val;
@@ -361,7 +361,7 @@
return 0;
}
-static int __devinit sp5100_tco_init(struct platform_device *dev)
+static int sp5100_tco_init(struct platform_device *dev)
{
int ret;
u32 val;
@@ -412,7 +412,7 @@
return ret;
}
-static void __devexit sp5100_tco_cleanup(void)
+static void sp5100_tco_cleanup(void)
{
/* Stop the timer before we leave */
if (!nowayout)
@@ -425,7 +425,7 @@
release_region(pm_iobase, SP5100_PM_IOPORTS_SIZE);
}
-static int __devexit sp5100_tco_remove(struct platform_device *dev)
+static int sp5100_tco_remove(struct platform_device *dev)
{
if (tcobase)
sp5100_tco_cleanup();
@@ -439,7 +439,7 @@
static struct platform_driver sp5100_tco_driver = {
.probe = sp5100_tco_init,
- .remove = __devexit_p(sp5100_tco_remove),
+ .remove = sp5100_tco_remove,
.shutdown = sp5100_tco_shutdown,
.driver = {
.owner = THIS_MODULE,
diff --git a/drivers/watchdog/sp805_wdt.c b/drivers/watchdog/sp805_wdt.c
index e4841c3..4552847 100644
--- a/drivers/watchdog/sp805_wdt.c
+++ b/drivers/watchdog/sp805_wdt.c
@@ -210,7 +210,7 @@
.get_timeleft = wdt_timeleft,
};
-static int __devinit
+static int
sp805_wdt_probe(struct amba_device *adev, const struct amba_id *id)
{
struct sp805_wdt *wdt;
@@ -272,7 +272,7 @@
return ret;
}
-static int __devexit sp805_wdt_remove(struct amba_device *adev)
+static int sp805_wdt_remove(struct amba_device *adev)
{
struct sp805_wdt *wdt = amba_get_drvdata(adev);
@@ -326,7 +326,7 @@
},
.id_table = sp805_wdt_ids,
.probe = sp805_wdt_probe,
- .remove = __devexit_p(sp805_wdt_remove),
+ .remove = sp805_wdt_remove,
};
module_amba_driver(sp805_wdt_driver);
diff --git a/drivers/watchdog/stmp3xxx_wdt.c b/drivers/watchdog/stmp3xxx_wdt.c
index 21d96b9..1f4f697 100644
--- a/drivers/watchdog/stmp3xxx_wdt.c
+++ b/drivers/watchdog/stmp3xxx_wdt.c
@@ -204,7 +204,7 @@
.fops = &stmp3xxx_wdt_fops,
};
-static int __devinit stmp3xxx_wdt_probe(struct platform_device *pdev)
+static int stmp3xxx_wdt_probe(struct platform_device *pdev)
{
int ret = 0;
@@ -229,7 +229,7 @@
return ret;
}
-static int __devexit stmp3xxx_wdt_remove(struct platform_device *pdev)
+static int stmp3xxx_wdt_remove(struct platform_device *pdev)
{
misc_deregister(&stmp3xxx_wdt_miscdev);
return 0;
@@ -269,7 +269,7 @@
.name = "stmp3xxx_wdt",
},
.probe = stmp3xxx_wdt_probe,
- .remove = __devexit_p(stmp3xxx_wdt_remove),
+ .remove = stmp3xxx_wdt_remove,
.suspend = stmp3xxx_wdt_suspend,
.resume = stmp3xxx_wdt_resume,
};
diff --git a/drivers/watchdog/ts72xx_wdt.c b/drivers/watchdog/ts72xx_wdt.c
index 8df050d..b8a9245 100644
--- a/drivers/watchdog/ts72xx_wdt.c
+++ b/drivers/watchdog/ts72xx_wdt.c
@@ -390,7 +390,7 @@
.fops = &ts72xx_wdt_fops,
};
-static __devinit int ts72xx_wdt_probe(struct platform_device *pdev)
+static int ts72xx_wdt_probe(struct platform_device *pdev)
{
struct ts72xx_wdt *wdt;
struct resource *r1, *r2;
@@ -476,7 +476,7 @@
return error;
}
-static __devexit int ts72xx_wdt_remove(struct platform_device *pdev)
+static int ts72xx_wdt_remove(struct platform_device *pdev)
{
struct ts72xx_wdt *wdt = platform_get_drvdata(pdev);
struct resource *res;
@@ -499,7 +499,7 @@
static struct platform_driver ts72xx_wdt_driver = {
.probe = ts72xx_wdt_probe,
- .remove = __devexit_p(ts72xx_wdt_remove),
+ .remove = ts72xx_wdt_remove,
.driver = {
.name = "ts72xx-wdt",
.owner = THIS_MODULE,
diff --git a/drivers/watchdog/twl4030_wdt.c b/drivers/watchdog/twl4030_wdt.c
index 249f113..9f54b1d 100644
--- a/drivers/watchdog/twl4030_wdt.c
+++ b/drivers/watchdog/twl4030_wdt.c
@@ -170,7 +170,7 @@
.write = twl4030_wdt_write_fop,
};
-static int __devinit twl4030_wdt_probe(struct platform_device *pdev)
+static int twl4030_wdt_probe(struct platform_device *pdev)
{
int ret = 0;
struct twl4030_wdt *wdt;
@@ -204,7 +204,7 @@
return 0;
}
-static int __devexit twl4030_wdt_remove(struct platform_device *pdev)
+static int twl4030_wdt_remove(struct platform_device *pdev)
{
struct twl4030_wdt *wdt = platform_get_drvdata(pdev);
@@ -247,7 +247,7 @@
static struct platform_driver twl4030_wdt_driver = {
.probe = twl4030_wdt_probe,
- .remove = __devexit_p(twl4030_wdt_remove),
+ .remove = twl4030_wdt_remove,
.suspend = twl4030_wdt_suspend,
.resume = twl4030_wdt_resume,
.driver = {
diff --git a/drivers/watchdog/via_wdt.c b/drivers/watchdog/via_wdt.c
index aa50da3..1a68f76 100644
--- a/drivers/watchdog/via_wdt.c
+++ b/drivers/watchdog/via_wdt.c
@@ -155,7 +155,7 @@
.max_timeout = WDT_TIMEOUT_MAX,
};
-static int __devinit wdt_probe(struct pci_dev *pdev,
+static int wdt_probe(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
unsigned char conf;
@@ -229,7 +229,7 @@
return ret;
}
-static void __devexit wdt_remove(struct pci_dev *pdev)
+static void wdt_remove(struct pci_dev *pdev)
{
watchdog_unregister_device(&wdt_dev);
del_timer(&timer);
@@ -250,7 +250,7 @@
.name = "via_wdt",
.id_table = wdt_pci_table,
.probe = wdt_probe,
- .remove = __devexit_p(wdt_remove),
+ .remove = wdt_remove,
};
module_pci_driver(wdt_driver);
diff --git a/drivers/watchdog/wdt_pci.c b/drivers/watchdog/wdt_pci.c
index e32654e..36a54c0 100644
--- a/drivers/watchdog/wdt_pci.c
+++ b/drivers/watchdog/wdt_pci.c
@@ -605,7 +605,7 @@
};
-static int __devinit wdtpci_init_one(struct pci_dev *dev,
+static int wdtpci_init_one(struct pci_dev *dev,
const struct pci_device_id *ent)
{
int ret = -EIO;
@@ -705,7 +705,7 @@
}
-static void __devexit wdtpci_remove_one(struct pci_dev *pdev)
+static void wdtpci_remove_one(struct pci_dev *pdev)
{
/* here we assume only one device will ever have
* been picked up and registered by probe function */
@@ -736,7 +736,7 @@
.name = "wdt_pci",
.id_table = wdtpci_pci_tbl,
.probe = wdtpci_init_one,
- .remove = __devexit_p(wdtpci_remove_one),
+ .remove = wdtpci_remove_one,
};
module_pci_driver(wdtpci_driver);
diff --git a/drivers/watchdog/wm831x_wdt.c b/drivers/watchdog/wm831x_wdt.c
index 87d66d2..9dcb6d0 100644
--- a/drivers/watchdog/wm831x_wdt.c
+++ b/drivers/watchdog/wm831x_wdt.c
@@ -181,7 +181,7 @@
.set_timeout = wm831x_wdt_set_timeout,
};
-static int __devinit wm831x_wdt_probe(struct platform_device *pdev)
+static int wm831x_wdt_probe(struct platform_device *pdev)
{
struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
struct wm831x_pdata *chip_pdata;
@@ -292,7 +292,7 @@
return ret;
}
-static int __devexit wm831x_wdt_remove(struct platform_device *pdev)
+static int wm831x_wdt_remove(struct platform_device *pdev)
{
struct wm831x_wdt_drvdata *driver_data = dev_get_drvdata(&pdev->dev);
@@ -306,7 +306,7 @@
static struct platform_driver wm831x_wdt_driver = {
.probe = wm831x_wdt_probe,
- .remove = __devexit_p(wm831x_wdt_remove),
+ .remove = wm831x_wdt_remove,
.driver = {
.name = "wm831x-watchdog",
},
diff --git a/drivers/watchdog/wm8350_wdt.c b/drivers/watchdog/wm8350_wdt.c
index 3c76693..34d272a 100644
--- a/drivers/watchdog/wm8350_wdt.c
+++ b/drivers/watchdog/wm8350_wdt.c
@@ -140,7 +140,7 @@
.max_timeout = 4,
};
-static int __devinit wm8350_wdt_probe(struct platform_device *pdev)
+static int wm8350_wdt_probe(struct platform_device *pdev)
{
struct wm8350 *wm8350 = platform_get_drvdata(pdev);
@@ -158,7 +158,7 @@
return watchdog_register_device(&wm8350_wdt);
}
-static int __devexit wm8350_wdt_remove(struct platform_device *pdev)
+static int wm8350_wdt_remove(struct platform_device *pdev)
{
watchdog_unregister_device(&wm8350_wdt);
return 0;
@@ -166,7 +166,7 @@
static struct platform_driver wm8350_wdt_driver = {
.probe = wm8350_wdt_probe,
- .remove = __devexit_p(wm8350_wdt_remove),
+ .remove = wm8350_wdt_remove,
.driver = {
.name = "wm8350-wdt",
},
diff --git a/drivers/watchdog/xen_wdt.c b/drivers/watchdog/xen_wdt.c
index e4a25b5..92ad33d 100644
--- a/drivers/watchdog/xen_wdt.c
+++ b/drivers/watchdog/xen_wdt.c
@@ -244,7 +244,7 @@
.fops = &xen_wdt_fops,
};
-static int __devinit xen_wdt_probe(struct platform_device *dev)
+static int xen_wdt_probe(struct platform_device *dev)
{
struct sched_watchdog wd = { .id = ~0 };
int ret = HYPERVISOR_sched_op(SCHEDOP_watchdog, &wd);
@@ -280,7 +280,7 @@
return ret;
}
-static int __devexit xen_wdt_remove(struct platform_device *dev)
+static int xen_wdt_remove(struct platform_device *dev)
{
/* Stop the timer before we leave */
if (!nowayout)
@@ -315,7 +315,7 @@
static struct platform_driver xen_wdt_driver = {
.probe = xen_wdt_probe,
- .remove = __devexit_p(xen_wdt_remove),
+ .remove = xen_wdt_remove,
.shutdown = xen_wdt_shutdown,
.suspend = xen_wdt_suspend,
.resume = xen_wdt_resume,
diff --git a/drivers/xen/xen-selfballoon.c b/drivers/xen/xen-selfballoon.c
index 7d041cb..2552d3e 100644
--- a/drivers/xen/xen-selfballoon.c
+++ b/drivers/xen/xen-selfballoon.c
@@ -222,7 +222,7 @@
if (xen_selfballooning_enabled) {
cur_pages = totalram_pages;
tgt_pages = cur_pages; /* default is no change */
- goal_pages = percpu_counter_read_positive(&vm_committed_as) +
+ goal_pages = vm_memory_committed() +
totalreserve_pages +
MB2PAGES(selfballoon_reserved_mb);
#ifdef CONFIG_FRONTSWAP
diff --git a/firmware/Makefile b/firmware/Makefile
index eeb1403..cbb09ce 100644
--- a/firmware/Makefile
+++ b/firmware/Makefile
@@ -97,7 +97,6 @@
fw-shipped-$(CONFIG_TIGON3) += tigon/tg3.bin tigon/tg3_tso.bin \
tigon/tg3_tso5.bin
fw-shipped-$(CONFIG_TYPHOON) += 3com/typhoon.bin
-fw-shipped-$(CONFIG_USB_DABUSB) += dabusb/firmware.fw dabusb/bitstream.bin
fw-shipped-$(CONFIG_USB_EMI26) += emi26/loader.fw emi26/firmware.fw \
emi26/bitstream.fw
fw-shipped-$(CONFIG_USB_EMI62) += emi62/loader.fw emi62/bitstream.fw \
diff --git a/firmware/dabusb/bitstream.bin.ihex b/firmware/dabusb/bitstream.bin.ihex
deleted file mode 100644
index 5021a4b..0000000
--- a/firmware/dabusb/bitstream.bin.ihex
+++ /dev/null
@@ -1,761 +0,0 @@
-:1000000000090FF00FF00FF00FF000000161000D7C
-:1000100064616275736274722E6E63640062000BB9
-:10002000733130786C76713130300063000B3139C8
-:1000300039392F30392F32340064000931303A34E5
-:10004000323A3436006500002EC0FF20175F9F5BF8
-:10005000FEFBBBB7BBBBFBBFAFEFFBDFB7FBFB7F61
-:10006000BFB7EFF2FFFBFEFFFFEFFFFEFFBFFFFF9B
-:10007000FFFFAFFFFAFFFFFFC9FFFFFFDFFFFFFF3B
-:10008000FFFFFFFFFFFFFFFFFFFFFFFBFFA3FFFBE4
-:10009000FEFFBFEFE3FEFFBFE3FEFFBF6FFBF6FF18
-:1000A000BFFF47FFFF9FEEF9FECF9FEFFBCF9BEE19
-:1000B000F8FEEF8FEEFBFE0BFFFFFFFFFFFFFFFFE2
-:1000C000FFFFBFFFFFFBFFFFBFFFFFFC17FFFFFFAF
-:1000D000FFFFFF7FFFFFFF7FFFFFFBFFFF7FFFFFB4
-:1000E000FC3FFFFFFFFFFFFFFFFFFFFBFFFFFFFFE7
-:1000F000FFFFFFFFFFFE5FFFFFFDFFFFDBFFFDFFD9
-:1001000077FFFDFFFFDFFEFDFFFFF2FFFFFFFFFFB9
-:10011000FFFDFFFFFFFDFFFFFFFFFFFFFFFFFFE111
-:100120007FFFFFFFFFFFFFFFFFFFFFFFFF3FFFFF1F
-:10013000FFFFFFFFE3FFFFFFFFFFFFFFFFFFFFBF2B
-:10014000FFFEFFFFFFFFFFFFFF67FFFFFFFFFFFF58
-:100150007FFFFFFF7FFFFFFFFFFFDFFFFFFF2FFF9F
-:10016000F3FDFF7FDEF7FDFF7FF77DFF7FDFF7BD4C
-:10017000FF7FFF1FFFEFFBFEFFBFEFFBFEFFEFFB6D
-:10018000FEFFBFEFFBFEFFFF3FFE7F9FE7F9FE7F15
-:100190009FE7FA7F9FE7F9FE7F9FE7FFFC7FBFBFE6
-:1001A000EFFBFEFFBFEFFBB7BFEFFBFEFFBFEFFBB9
-:1001B000FFE0FDF9FE7F9FE7F9FE7F9DF9FE7D9D43
-:1001C000E7F9FE7F9FEDEDFFFDFF7FDFF7FDFF7F8E
-:1001D000DFFDFF7FDFF7FDFF7FDFFF9BFFEFFBFE14
-:1001E000FBBFEFBBFEFFAFBBBEFFBFEFFBFEFFFFE2
-:1001F000B7BFDBF6BDBF6BDBF6F9BF5BD6F9BF6FF0
-:10020000DBF6FDBFFF0EFFFFFFFF5FFFF7FFFF7F86
-:10021000F7BDFFFFFFFFFFFFFFDF9FFFFFFFFEFFB9
-:10022000FFEFFEFEFFFF77FFFBFBFFFFFFFFF83F47
-:10023000FFFDFFFFFFFDFFFFFFFFFFFFFFFFFFFFD2
-:10024000FFFFFFF47FFFFEFDBEFFDFFEFFFFEF7F3E
-:10025000FFCFFFCFFFFFFFDFE6FFFF7FDFF7DD7F91
-:100260007FDFF7FF7FDFD7FDFF7FDFF7FFCDFFF2F7
-:10027000FFFF4F7FF4FFFFFFE7EFFFFFFFFFFFFFF1
-:10028000FFFFBBFFEFFFFEFFFFFFEFFFFFEFFFFBF7
-:10029000FFFFFFFFFFFFFF65EFFFFF7FFFFDEFFFAA
-:1002A000FFFFFEFFFFFFFFFFFFFFFFFECFDFFEFFB1
-:1002B000FFFBFFFFFFFFF3FFFFFFFFFFFFFFFFFF5E
-:1002C000FEDFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5F
-:1002D000FFFFFFFFFFFEBFFFFFFFE37FFFFFFFFF0B
-:1002E000FFFFEFEBFFFEBFFFEBFFFC7FFFFFFFEE2B
-:1002F000FFFFFFFFFFFFDDFFD6FFFDBFFFFBFFFEA0
-:10030000FDFFFFFDEFFFFFFFFFFFFFDEFFFFFFFF32
-:10031000FFFFBFFFFDFF7FBFFF5FDFFFFFBF77FF77
-:10032000FFFF7FD7FFFFFFFFFFC3FFFFFFFFDFEFF1
-:10033000FFFFFEFBFFFFDFBFFFFFFFFFEDFFB7FF8C
-:10034000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFBD
-:10035000FFFFFFAF7FFFFFFFFFFFFFFFFFFFFFFF7D
-:10036000FFFFFFFFFFFFFFFFDFBFDFF3FDFBFF5BD3
-:10037000FDFFBFEFF7FFFF7DFFFFFFFFF83BFFBF74
-:100380006FFFFEFFBFFFEB7DFFEFFBFEFFFFFFFFF9
-:10039000FFF27FFCFF3FDFEDFEFFFFFFFFEF5FF7A8
-:1003A000B5FFEFFFFFFFE03F9F9EFFFFEFFFDFFF87
-:1003B000BF5FBFCFF3FFFFFFFFFFFF69AF33FDFF5D
-:1003C000FBFFFFFFFFFCFF7FD9FFDFFFFFFFFFF514
-:1003D000A3DF6EDEFFFFBDFFFFFEFFFFFFFEE7FDB9
-:1003E000FFFFFFF9EFC6FEB7ADE5F9FFFFFFCFFF57
-:1003F000FFFFCDFB7FFFFFFFF9F60FDFECCF7FFFA5
-:10040000FB7FFFFFFFFDFFFEF9FD7FFF7FFFF95B35
-:10041000FF73DCFD7BDFFFFFFF7BFFFFF753D6FFA2
-:10042000FFFFFFD89FFEFFEF7FEEFFFFFFFBEDED2D
-:10043000FDFFFEFFFFFB7FFFE27FFF6FD857F7FF57
-:10044000FFFFDFFFE8FFFFFDFFFFFC7FFFE4FFFB97
-:10045000EFFBFEDFB7EDFFFEDF7FFFFE7FB7FFFFA5
-:10046000FFFF89FFFFCFF3FE7FFFEFFFFE7E7FFBE5
-:10047000FFFFFFFFFFFFFFF1FFEB7AD5BF6FDBBE92
-:10048000FDB7D8F6E5BF6FFBFEF5BD7E06FFDFF7D3
-:10049000FBF6FF3FFFDBFFFF6FFBF7FFFFFFFBFEFE
-:1004A000F7AFFFB7EDEFF7FEFFFFDFFFFEFFEFFF58
-:1004B000FFFFFFBFF7FC1FEEFBFEBDFF7F5FD7FD19
-:1004C000FB43FFFFFDFF5FFFF7FFF93FFFCFF3FDAA
-:1004D000F77EEFA7F9FE8FA7E9F37E9FFBF8FFFFFA
-:1004E0003FFD7F5FDFFDFFFF5FFFFD5FFFFF7FFDE4
-:1004F0007FFD9FFFE0FFFAF8BE6F9FE6F8BE3F9AD0
-:10050000F9BE6F9FE2F9FE6F9FF9FFF5FD7FCFDF28
-:10051000FDFD7FFFF5FFFFFFF7F5FD0FDBFFD3FFCD
-:10052000EBFAFFFFBFFFFAFFFFCBFBFEFFFFEBFA8B
-:10053000FEFFFFB7FFFFFFFFBFFFDFF5FFFFD7FFA6
-:10054000FFFFDFD7F5FF7FFE4FFFFDFF7F7FFFAD92
-:10055000EBFBFFADFFFFFFFFAFEBFBFFFC0DFFFF72
-:10056000DFD2FDFFFFFDF6FFFF7FFFFF1FFFFFFF55
-:10057000FFFB3F7DEB32FEBF2FEBFAAEBDE0FA7E14
-:10058000BFADEBFAFEBFF57FFFDEFEE3FBFFFFFF33
-:10059000DFEF4FDFFF7FDFFFF7FFFFF87FFFFFEFAA
-:1005A000FBFFFFFFEFFFFFDFEDFBDFFFBFFFFFFF05
-:1005B00081FFFFFFFF3FFFFFFFFFFEDDFEEFFDFFBF
-:1005C000FFFBFEF7FF93FDFB7EFFFE87E9FF7FB396
-:1005D0009FFEFEFFAFFDFE7E3FFE67FFFFF7FFFFC2
-:1005E000FCF7DFFDFF7FFFFF7F6DFFFFFEFFFF2FAB
-:1005F000FFBFFFFFEEFFBEFFFFFEFFEFFFFFFEFFAF
-:10060000EFFFFFFA5FFFFFFBFFFFEFFFFBFEFDFFCA
-:10061000FEFFFBFFFFFF7FFFFEBFDFFFFBFFFFF7DC
-:10062000FCFDFFFFFFFFFF7FFFFFFFFFFFF27FFFEC
-:10063000FFFFFF7FFFFFFFFFF3FFFFFFEFFBFFFF6A
-:10064000FFDFE2FFFFFBFFFFFFFFFFFFFBE7FFFD19
-:10065000FFFFFFBFFFFFFFEDEFFDFFFFDFD7F5FD62
-:100660007F5DFDFF7FDF97F4FD7B5FFFC9FFFBFE32
-:10067000FFBFFF5FFFFFF7FFEFFDFFEFFFFFFFFF94
-:10068000FFF7FFD7FD7D7FFFFFFFFFEFDFF7FDFFE8
-:10069000BBFFFF7FFFFEE3FFF9FE7FBFEFFBFEFF27
-:1006A000BFF9FEFF9FEFF9FEFFBFF3DAFF37CDF38F
-:1006B0007CDF37CDF37F37CDF37CDF37CCF37F5A48
-:1006C000BDF6FDBF6FDBF6FDBF6FDEFDBF6FDBF676
-:1006D000FDBF6FFEF16FEB7ADEB7ADEB7ADEB7AF41
-:1006E0007ADEB7ADEB7ADEB7FF7EFFFECDB36CDB13
-:1006F00036CDB36CDECDB36CDB36CDB36CDFC9BFAA
-:10070000F7BDEF7A9EA7A9EA7AB7BDEA7BDEA7BD5F
-:10071000CA728D91FFEFFBFEFFBFEFFBFEF7EFFB11
-:10072000FEFFBFEFFBFEFFFE87FFF6FDBF6FDBF6B0
-:10073000FDBF6FF6FDBF6FDBF6FDBF6FFE4FFFBF66
-:10074000EFBBEEFBBEEFBBEFBEEFBBEEFBBEEFBB06
-:10075000EFFC5FFFFFFF3FCFF3FCFF3FCFFCFF3F0E
-:10076000CFF3FCFF3FCFFD9FFEBFAFEBFAFEBFAF65
-:10077000EBFEBFAFEBFAFEBFAFEBFFE16FFDFF7F1C
-:10078000DFF7FDFF7FDFFDFF7FDFF7FDFF7FDFFF8F
-:100790007ABFFBFEDFB7EDFB7EDFB7FB7EDFB7ED99
-:1007A000FB7EDFB7FFC9FFFFBFEFFBFEFFBFEFFB25
-:1007B000FFBFEFFBFEFFBFEEFBFEBBFFFEFFBFEF89
-:1007C000FBFEFFBFEFFEFFBFEFFBFEFF3FCFFFE7EC
-:1007D000FEFFF5FD775DD735DD77D7F5CD7B5DD7AE
-:1007E000F5DD77FE27FFFF8BE2F8BE2F8BE2F9AF36
-:1007F0008BE2F8BE2F8BE2F9FE1FFF5FD7F5FD7F7E
-:100800005FD7F5FF5FD7F5FD7F5FD7F5FFFA3FFEB6
-:10081000BFAFEBFAFEBFAFEBECBFAFEBFAFEBFAF83
-:10082000EBFFFE7FFD7FFFFFFFFFFFFFFFFFFFFFEF
-:10083000FFFFFFFFFFFFFFE6FFFADFF7FDFF7FDFB0
-:10084000F7FCFFDFF7FDFF7FDFF7FDFFF5FFFFFFA1
-:10085000FFFFFFFFFFFFFBFFFFFFFFFFFFFFFFFFAC
-:10086000FF02FFFEBFABEBFABEBF23EBDE1FAFEA1A
-:10087000FAFEAFAFEBFD97FFF3FC7B1FCFF1FC7FE0
-:100880001FF1FC771FCDF1FCFF1FFE87FFAFEFFAD2
-:10089000FEFFAFEFFAFDBF2BFB7EBFBFEBFBFBFB09
-:1008A000DFFFFBF7FFFF7FF7F7FFFDDFFEFCDFFF5A
-:1008B000DFFFFDFFDABFFFBBEFFBF9FFBEEFFBFB86
-:1008C000BFEFFBFEFFBFEFFBFFF77FFDD7FFFF7F13
-:1008D000FFFFFFFEF7FFFEFFF7FFFF7FFFFFECFFCD
-:1008E000FFFEDFBFFFFBFEFFBB68AE1FAEFBFBFFE3
-:1008F000FFBFFFD5FF7FFFFFF7FEFEFFBFEF9FFDAE
-:100900007FFFCBFFFFDFFFFFBBF7BFFFFFFFFFDF77
-:10091000FFBFFBFFFFFFDE3FFFFFFFFFFFA7FFFF64
-:10092000FFFFEFFF7FFBFDFB7FFFFFFFFFCFF37CB0
-:10093000FF7F8D7FFFFFFFFFFBFFF7FBFEFDFFFF4C
-:10094000FFFFF7FDFF7FFD1FFDFFFFFFFFBFDFFF85
-:10095000FFFE5CFF6DFF7FABE7F1FFFD9FFFFFAD8B
-:10096000EB7A3F1FFFFFFEBFAFF3DEF5FF8FFBDF2C
-:10097000E67FFFDFF3FDFF7EFFFFFFFFFFFDF7F3E5
-:100980007FDFF7EFFFF63F9FDFFFFFEEFFFFEFFB9D
-:10099000FFFFF9FBFE4FBFEFBBFF69AFAFFCFF3FAF
-:1009A000DDFFFCBF8FFFFDF3BFED9EFCBF6FF5D3F6
-:1009B000DFFFDBD6F5EFFDFEFFB9FF1FD2A9AFFFCA
-:1009C000DBF7BFEF46FFFFADEB7ADFEFF7FF7FF717
-:1009D0009FEDFF7FFFADEB7FF56FFFFDFBD6F4F7DB
-:1009E000FBF97E7FFF5FC2FEBFFDFB33DFF95BFFDC
-:1009F000FFDD677DCFEFDBECFF77DDF7FDFFFFDE8F
-:100A0000A7BFD49FFFFFBFEFFEFFDFEFBBFFFFEFEE
-:100A1000EBFAFFEFBDFBFFE27FFFDFDFF7FDBFBBC0
-:100A200073F7FD7FDFDEF7BFEADBF6FFD6FFFF6679
-:100A3000FFBEFFBF6BD9F6DFFFFB7E7FB77EFFFEF9
-:100A4000FFCDFFFE7FFFFCFD3FFBFBF7FFFFFBF64B
-:100A50007DFE7FFFFCFFB9FFF9FAFEBFAF5BD6ED6D
-:100A6000AD7BF6F9BFEFF8FAFEBFFEE6FFFFF7FD3C
-:100A7000FF7FBFEFF3FFFF6FF7FEFFFFF7FDFEF70E
-:100A8000EFFFFBEFFB7EDEFEFFBFFFFEFFFFFBFF86
-:100A9000FFEFFB6FFC1FFEE7FFFFFFEFFFD3B4BBD1
-:100AA000FFFFFDBF6FE3FEFFBFFCBFF7CFF7FDFF0A
-:100AB0002FDFABEAFFDFE7EA9AAFEFFBFEFFF53F80
-:100AC000FD7EFFD7F5FBFFFDF7FF7FFEF7FDFFD7AC
-:100AD000FFD77FEE7FFA79FE2F8BE6F9FE3F9EF976
-:100AE000BE2F0BE7F9FE2F9FFDFFFE7D7F5FD7FF37
-:100AF000FF7FFFFDFF7F5F97FFFD7F5FFFE3FFFF4E
-:100B0000FAFEBFAFFBFBFFFFCFEBFEBFAFFFFAFE6E
-:100B1000BFFF87FFFFF5FFFFFFFFFDFF7FFFFFFF29
-:100B2000FBFFFFF5FFFFFE0FFFFDEBFFFFF7FFEF02
-:100B30007BDFFEFFFFDFF7FDEB7FDFFF5FFFFFFFE8
-:100B4000FFFDBFFF7EFABFC7DBF7BD3FFBFFF6FF30
-:100B5000FAAFFFEBFAFE3F2FEAFA3EADC9BAF6ADA7
-:100B6000AFEBFAF6BFFE7FFFFFFDFFF17F3FCFF156
-:100B7000EFFF7FFFBCDFDFF7DDFFE07FFFFFFEFF62
-:100B8000FAECBB7F5FFFFBECFFEFB7FFF7FFFFB5B2
-:100B9000FFFF7FFFFFFFEEDF5FDFDEFFAEE777FFE8
-:100BA000FFDFF7FFE3FFFABBFEFFAFFDFBFEBFABCE
-:100BB000F9FEFFBF7FBFFEBDFED7FF9FFDFFBEEF6B
-:100BC000FFEEFDBB5BEFFF7FEFFFEFFF7FFF4FFF10
-:100BD000EFFBBCFCFFFFFFFEFEFDFAFEFBFFFDF39B
-:100BE000FBFFF85FFFFFD7F5FDDFEFFFF3DC5FCE24
-:100BF000F5BDFFFFD7FFFFF93FFFDFF7FFFEFFFD6A
-:100C0000FFFBFFF7B97DFEDFFFFFFFFFF97FFFFE70
-:100C1000FFFF7FFFFEFFFFF7F6FFBFF1F8FFFFFFCB
-:100C2000FFE0FFFFFFFFF9FFFFFFFFFFEFEFFFFF19
-:100C30009BFB7FFFFFFFC1FFDFFF3F5FD7BFEFBB26
-:100C4000DEEEFF7FDFFFFEF57FDFFF99FFFFFAFF9C
-:100C5000BFFDEB7AFFB7FEFEFFFFEFFFFFFDBFFF1B
-:100C600097FFFDF7FF7FF7FFFFFD5FFEF3F9DFDF83
-:100C7000FFFFFCFFFF83FFFFFEFF9EECFBEEFF9FED
-:100C8000BFEFFFFEED7BFFFFFFF15AFFFFFDFF7C93
-:100C9000693BDFFF7F1FDFFFFDBAFFFFFBFF5BBD8F
-:100CA000FFFFFFFFD7B6EDE9FFD6BD6F5FFBFFEF9C
-:100CB000FF5FFEF66FFFFFFFFFF7EB7ADFFF9F7F1F
-:100CC0007FFFB7FFFFFEDFFF6CFFFBFFBB6FEBFE9D
-:100CD000CCF7A5FA5CF575BBB7DFFE6F5FC5BFFD4E
-:100CE0007BFEFF95E729CF4FF591EE6BDFEFFD54CB
-:100CF000F5BDB1FFEFEEFBBEBFAFFEDEBD6FDAF2BA
-:100D0000FFAFBEFFFFFD7EA7FFF7FFBFEF7BF6FD46
-:100D1000BD4AF28585BF5BFEB5FDFAFF4FFFFEDFE2
-:100D2000FFEDFFBFFFBF7FFEFFB76DFFF7BFBFEF58
-:100D3000FD1FFFFE7DFF67FFFFFF3F7FFEBFFFE759
-:100D4000DFE7FFEF6BFC1FFFBFEFFBFEDEBFAFFA7D
-:100D5000FFB6EFF9FEFF8FEFDBEFAB6FFBFEFFFFA0
-:100D6000EFFDFF7FFFFFDEFFFFEFFFFFFF3FFF6CA9
-:100D7000FFBFFBFFFEFFFBFEDFFFFFEFFFFFBFFF3D
-:100D8000FFFEFBFFD57FFFFFEFFBFFFFBFEF43B58C
-:100D9000FD6FCFD6BE3F7FDBFEC3FFFDFFAFEBFB9A
-:100DA000FCFF3EEFE8FABDCDAAFEFE7DCFFFB7FF08
-:100DB000F7FFFFFFFDFF75CD52D7FDFBF7DDFBEF22
-:100DC000EBFFFF4FFFBF9FE7F9FC7F8BC3F9AF8FAE
-:100DD000E7E9BE7F9FE6F9FC5FFFFFF7FDFF7A5F63
-:100DE000D7EDFFFFD7FFDD7FE7FFFCFFFC3FFFFFF5
-:100DF000FFFBFFFEBFAFFFFDFFEFFFEBFFFFFFFFBE
-:100E0000FFF77FFF7FDFFFFDFD7FFEF7FD7FDFFF49
-:100E1000FDFFFFDFFBFFEEFFFBFFF7FDFF7ADFF5D6
-:100E2000FDFADFF7FCFF7FDFBFEDFFC9FFDFFFBF8C
-:100E30002FFBFFBCADFFF7FFFFEFD3FF7DBF6FFFC1
-:100E4000FAFFFEBFAEEAFABEADA5EBCEBFA7EB5AE6
-:100E5000DEBDAF6BFD57FFFFF47F1F7FFDFF7F36C9
-:100E6000F0DF79FFFFFFF7FDBFFF87FFFBF3FCFF1C
-:100E7000FFFFFF7EFFBFDFFFFFFFFFFFFDBFF89F0C
-:100E8000FFFFFFFFBFFFFFFDF7FCBDFFFEFFFFFF02
-:100E9000FFFFFBF9BFFFFFEBE2FEFFBFEFA9BA2F99
-:100EA000EBF9FE77DFF7FFFFF97FFFFF7FEFD7FF5B
-:100EB000FDFFFBF5FFBF6FDFFFFFFDFFFFF0FFFF53
-:100EC000FF3FCFFFBAEE9BBFEED7FECDEFFFDFBFF8
-:100ED000FFFFC5FFFFFD7F4FFDF6D9FF4FD6FDBFDA
-:100EE0006EFFFFF47FFF7F8BFFFFFFFFF7FFF9FE31
-:100EF00037FFD9FBF5AFFDFFFFFBFFFF07FFFFFF4C
-:100F0000FBF7FFFDFF7CFA7E4FFCDF1DC7FFFFFFF5
-:100F1000FFAEFFFFFFFFFDFBFFFFFEFEFCFF7F7F3D
-:100F2000BFEFFEFFFFFF5FFDFFFFFFFD6F5AD77BA7
-:100F3000BE5FFE39FFF7FFF7FDFEAA1FFFFFFFFFB1
-:100F4000FEFEABAFFDFEBFFFF7FF7FFE8FE3FBEEC4
-:100F50007FFFFFFFFFEBFBFFFDBFEFDFFFFFFFFFAB
-:100F6000FFFFFFFBE43FFFDFFFFFFFFFF3EFBBFBF4
-:100F7000BFEFBBFFD7BFFFFFFF29AFF7FFFFFBFFAF
-:100F8000FBE6FF0FFB3FDF0FFFAFFFFFFFF5C3DF08
-:100F90005FFFFFFFFE6BCABEBCFF9FF2BFFFFEFA02
-:100FA000FFFFEF16FFFFFFFFFFFCDF97FD79FF3725
-:100FB000E77FFFFFB5FFFFF62FFFFDFBFEFFFFFD05
-:100FC0005F575FFFDB52DFFFFDBFFFFFFCDBFF7BF7
-:100FD000B5FD7FFF719C6EFFF635A59BFFFFFDFF02
-:100FE000FFDB9E7FFEEFFBFFFFBDEFFFDEB7F94BA0
-:100FF000FFF5EFFFFFFFE87EFFEADFF7FFFD695B2C
-:10100000FC9FEF78D6FFEBEFFFFFFFE8FFFFEDFF60
-:10101000FFFFFFE3F9F6BFFFFFFEDFFF7FFFFFFFEC
-:10102000D1FFFFE7FFFFFFFFE7F9FFBF7FD9FFFD1C
-:10103000FE7FFFFEFFF9FFFBD6DFBFEF5BD6FFBFF2
-:10104000FBF6FFBFEFF8F6DDBEFE16FFBFEFFFFEBB
-:10105000FFBFEFFFFFFF6FFBFFFFFF6FF3FFF7EF38
-:10106000FBFFBFFFEFFEFFBFFFFFFFBEBFFFEFFFB6
-:101070007FEFFFFD17FB7BFFFFFD7FDBF6F47FFAC1
-:10108000FEF5BFEBE3F7FFFFE9BFFFAFF7FDF37E30
-:101090008FA3EAFFCBF3EEFFBFEFF7F9FFFE7FFF71
-:1010A000FFFFFFF5FBF6FFF52FFEFBD7BFFFBEDF0F
-:1010B0009FFFF0FFFFF9FE7F8FA3F8FE6F9FF9F609
-:1010C0002F9FE7F9FE2F9FE1FFFFFF7FDFF7F5FD81
-:1010D0007F7FF5FF9F5FFBFEFF7FFFFFCBFFFFFBE7
-:1010E000FEFFBFAFFBFEFFDFFEFEBFF7FFFFFFFF10
-:1010F000FFC7FFFFFDFF7FDDF7FDFFFFD7FFFD7F90
-:10110000FFFBFDFFFFFEEF7FFDEFFBFEFBFDFF7F23
-:10111000DFFDFF7ADFF7FDFFFFFFFF1FFFFFD3F7C4
-:10112000FFFF6FDBFFFFEFCBF4FFFFFFFFFFFFFED3
-:1011300029FFE8DA769FAF6ADAFE35EBDAD6BFAB85
-:10114000EB7ADEBFD77FFFFEFFBFEFFDDF77BFFD8E
-:1011500037EFFFEFFF3FFFFFFFFE7FFFFFFFF77E51
-:10116000DFFFFFFFFAB77FFFFFFEFFFFFFFF89FFF3
-:10117000FFFFFFFFFFFFFFFFFF9FFBFFFFFFE7FFFB
-:10118000FFFFFFAAFFABFBFAEFBFFFDFFA7BB9FE61
-:10119000FEFFFDFFF7FE3FFFB7FFF7EEFF7FEFFF1C
-:1011A000FF7FFF1FFBFFBFFBFEFFBDFFFF2FFFBF4A
-:1011B000FF7FDFFAFFFFFCEEF5F3BEFB0FEFF3BEA0
-:1011C000EFFC5FFF5AFFF7DFFFFFFED5FC5FFBF28E
-:1011D000FFFF2FBBF3FFFFBFFFEFFFEFFFFFFFFF9F
-:1011E000BFFFFFFD7BFFDFB9FFFBFFD87FFFFFFFE6
-:1011F000FBFFFC7F1FBFE0DFF7EFFFFD7FFEDFFFA0
-:10120000E0FFFFFDEFFBFFFEF7DFFFEB5FFFF7FF08
-:10121000FFFFFFBFFFFDFFFDFFFFFFF7FDFF3BDC13
-:10122000FD6D7B5F57F5FD7F5FFFB1FFEBFFFFFFBC
-:10123000FBFBFEFFBFFBBEFFBFEFFBFEFFAFFEF7FA
-:10124000DFDFFFFFFF7FCFF3F8FFD7FBFF5FBFF7C5
-:10125000FBFF7FFE23FFFFFE7FF3FFFBFEFFFFF39D
-:10126000FFFFF5F9FF3FFFFFF09AFFBE7FFFFCF99C
-:10127000FFFDAFEBFEBFFFCFF3FE7FFFFF5BBDFFC8
-:10128000BCEBFFD7D4AFAFFDFFCFF7FDFF7FDFF79C
-:10129000FDFEFF6FFFFBFFFFFFFD7F5EFDBFDBF687
-:1012A000FDBF6FFBEEFDFF7AFFFAFBFF3FFBB75F71
-:1012B000D6F71F71DC771DC731DC77DFF9BFF55B2F
-:1012C000F4D79DAEFFBFFDBFDBF6FDBF6FDBF6FEC3
-:1012D0003D81FFEBFEFEFEFFEB7ADF7D777DF5794A
-:1012E000DF57DDF57D7EE6FFD63FBF7FFFD4F53FBC
-:1012F000BFFBBEEFB3EEFB9EEFBBFE8BFFFEDFB787
-:10130000EDFFF7FDFEFFEFBBEEFFBEEFBBEEEBFC2C
-:101310001FFFFFFDFFE7FFF7FDFFEFFEFFBFEFFB46
-:10132000FEFFBFEBFA1FFFB7EF5BFEFFAFEBDDE7A2
-:10133000DE779DE779DE779DBFE66FFFFEFFBFEFAB
-:10134000FBFEFDBF6FF6FDBF6FDBF6FDBFFF7EFF4F
-:10135000FFFBFEFEFFEFFBFDEF7EF7BDEF7BDEF751
-:10136000BDEFFFD5FFBFFFEFFEFFFC3F0FE7FE7FA6
-:101370009FE7F9FE7F9FE7FEF3FFFEDFADDF67EE3D
-:10138000FBBFEFFEFFBFEFFBFEFFBFEFFF23FFFF43
-:10139000FFFF7FFFF3BCDBFEFBFFFBBEF7FBFF7F26
-:1013A000DFFFCFFBFF9FE3F9BE3F8FE779FF9DE7AC
-:1013B000F9FE7F9FE7F9FE5FFFCFF7FFFFFFDFF743
-:1013C000FE7FE7F9FE7FFFFFFBFEFFFFBFFFBFBF12
-:1013D000FFFEFFBFEFFFFDFFFFFFFFFFFFF7FDFF7A
-:1013E000FF3FFFBFFFF7FFFF7FDFFFFFFFFFFFFFB5
-:1013F000FFFFFFFFFFE8EFFF5FF7BFF9FEDFB7FD7D
-:10140000FFDFF7FDFF7FDFF7FDFFDDFFF2FFBFFF2F
-:10141000FFBFFFFF2FF2FFBF2F7BD2F7BF2FFFBB16
-:10142000FFEE8FAFEBFAFE3FA769CE8FA4EAFAEE8C
-:10143000B7AEEBFDC7FFF7F7FFFFFFFFFF7F3EF300
-:1014400074FF3F4FFFE7FF3FFEA7FFFFDFF7B7FF48
-:10145000F7FFBAEF37EBFBFEBFFBFEF3FFF9DFFF51
-:10146000BFFFFFFFBFFFFFFFFDDFFFFDFFFFFBFE35
-:10147000FDFFFBBFFE3FEDFFDFBE3DA7FBFA3FE6F2
-:10148000E1FEFE3FEFE3DFF57FFEFF7EFFFFFFFFA4
-:10149000EF6FF6FF7DEFD7DEFF7DEFFFF2FFFFFF7F
-:1014A000FFFFFF7BDEFBE6EEEF376EF37EEB37EF01
-:1014B000FFC1FFFEFFF7EFFFFFFFBF3FD2DFBF2FF0
-:1014C0007BE2FFFE3BBDDBFFFEFFFFFFFFFFEFFE0A
-:1014D000FFFBFFFFBFFFFBDFFFBFFFB7FFFFBFEF5C
-:1014E000FFFFFFFFFFFF0FFF7FFF1FEFF1FDFFF685
-:1014F000AFFFFFFFFFFFEFFFFFFFFE9FFFFFFF7745
-:10150000EFF7FBFFFE5FFFFFBFCFFBF7DDF7F5FF58
-:101510005FD5F5FD7F5FD7F5FFFB0FFFFFA9EA7AE7
-:10152000FFAF8FFEDFAFEFFBFEFFBFEFFBDFE55F3F
-:10153000FFFFFFFFFFBD57FFFF6F77BFF7FBFF7F89
-:10154000BFF7FFFCBFFF9FFFFFEFFFFEFFFFFF1F87
-:10155000CFFFFCFFFFFFFFFB65AFF37CFF3FDFFF2B
-:10156000FDE9FE7FE7FFFE7FFFFFFFFFFDE3DFFBFF
-:10157000DBF6FDEF5BFBFFDFFCFF3FDFF3FDFF7FF3
-:10158000DFEF66FFDFADEB7ADEF7F7E7D9FD9F67A8
-:10159000D9F67D9FE7DFF547FD655BD6F4FEFFEFEB
-:1015A000FF6DF6DDB76DDB76DCB77DFA9BF66D9DE2
-:1015B0006759DFF7DDFFEBFEBFAFEBFAFEBFAFE32E
-:1015C000D19FFFBDBFEFFEF7BFBFF7D77FDDF79D10
-:1015D000DF7FDFF7FFE07FFDC1DFF7FDC77F7FFB28
-:1015E000FFBBECFB3EFFBFECFBFFD87FBF6CFFBE39
-:1015F000FFBFEDFFEFFEFBBFEFFBFEFFBFEEFFC542
-:10160000FFAF6FFFFCFD3FE7FFFEFFEFFBFEFFBFFD
-:10161000EFFBFEBF89FEFABAFEBFAFFBF6F5D97D40
-:101620009765D9745D9765D3FED6FFBFF7FDFF7F41
-:10163000BFCFFBFEFFEFFBFEFFBFEFFBFFF68FFB15
-:10164000FFEFFB7EDBFEFFBEEFEEFBBEEFBBEEFB74
-:10165000BEFFFFDFFF43FFFFFBEF5FB7FE7FE7F952
-:10166000FE7F9FE7F9FE7FF9BFFEAF77FDFF2FAF4B
-:10167000A7FEFFEFFBFEFFBFEFFBFEFFF17FEFDFFB
-:10168000FF97F5EFFFDFFFFFBFFFBFFFFFFEFFFF8D
-:10169000FFE0FFFFF9FE2F8BE3F8BE779FF9DA77C3
-:1016A0009DE779DE779FDDFFFDFD7F5FD7FDFF7F43
-:1016B000E7FE7F97E7FBFEFFBFEFFFABFFEFFAFE12
-:1016C000BFAFFFFAFFFFDFFFFBFFF7FDFF7FDFFF8D
-:1016D00067FFF7F5FFFFFFDFFDFFFFFFFFFFFFFFE6
-:1016E000FFFFFFFFFFEFFFBDEBFFFFF7ADEBFFDFFE
-:1016F000FDFF3FDFF7FDFF7FDFFF5FFFF7FFFFFD30
-:10170000BFFFCBF4FF7FD3F7FD3F7FD3F7FFFC3F55
-:10171000FFEAFABEAFABEBBAF4956B52D4AD2F4AE9
-:10172000D2F6BFD27FF73FFFFFF37FFFFFF7FFBA8D
-:10173000DFFBFDFFBFFFFBFFF87FEAFFFEFEDFFFE1
-:10174000F7FF7FBBFFFFBFDFFBFFFFBFFFB17FFFE7
-:10175000FBEFFFFFFFFFFFBFCFFEFFFFEFFFF7FF36
-:10176000FFFFF1FF69BEFABFAFE2FFFEFDAFF3FE80
-:10177000FFBFEFFBFCFFFF07FD95DBDF7FDFAFFF68
-:10178000F7AF36FEBF65EBF6FE9F6FFE07FFCFFF9C
-:10179000F8FEFFCFFFF6FAE7FBFEFFBBEDF9FFFF18
-:1017A000FF5FFFFFFF75FFEF7EFDE0E85ED3E5F929
-:1017B0003E5FD7F7FFFA2FFBFFFFFFFFFEFFFF7F24
-:1017C0007FD7F57D5F57D5F5EFFFF37FFC7FFFC730
-:1017D000F1FFFF1FCFB0FF3FCFF3FCFF3FCEFFE491
-:1017E000FFDF7FFEF7BBFFFFDFEFEEFFBFEFFBFE8C
-:1017F000BFBFEFFFD1FFFFFFFDFBFFFDFFFB9FE939
-:10180000FE7F9FE7F9FE7FBFFFB3FFFFF7FFFFAF4C
-:10181000F7FFB63FEBFAFEBFAFEBFAFEBFFEA7FF46
-:10182000FFFFFFFFF7FFFFFFFE9FF7F9FF7F9FE737
-:10183000FFFFFEAF6FFFFFFF9FFFDFFF7D5FDDFF5D
-:10184000FBBFE7BBFFFBDF6D5F7EFFFFFFFFFFFF1F
-:10185000EBF7FFE7EFF7FFFF7FFFF7FFFC8FFFEFEF
-:10186000FDFEFFBEF4F27DD7CFFF3FFFFFFFFFFF7E
-:10187000FFCF6BFFBF3FFBF2FC7FEBFF9FFAFFFF49
-:101880003FFFF3FFFFFD70F7FFFFBFFFFBD7FEF544
-:1018900077FF15DD77FDFF7FDFF7FBCDBFFFFDFF96
-:1018A000FFDF37CDF9ECFEEFBBF4FB3F4FB3FFFD9D
-:1018B000CBFFE97E549FE54BB7FFDD7DC771DD7738
-:1018C0005DD775CD7FD6FFD3F6F93F6D95AF7FFE1F
-:1018D000FFEFFBFEFFBFEFFBFEF6C7FFAD7BCAFFCE
-:1018E000BFBFEFFDE3DFB7EDFB7EDF37EDE3FBDFEF
-:1018F000FF525C15FDCF7FDFFEEFEFFBFEFFBFEC7D
-:101900007BFEFFFE3E7FDAF7FDFF7FFFFFFBEFBBB5
-:101910006FFBFEFFBFEFFBFFF77DFFD8FFFDBF7F33
-:10192000FBFFFF9FFBFE7F9FE7F9FE7F9FEA7FF6AD
-:10193000BFBD6A5AF6E5BF775F6DDD775DD775DDB0
-:1019400077FFA5BFCFFBFFFFBFCFFBFDFFBFF3FEC0
-:10195000FFBFEFFBFEFFFDABFFBFBFFFFBFF7FEF56
-:10196000FFBEFBEEFBBEEFBBEEFBBFFFB5FFD0BC87
-:10197000FD2F4BF7FFFF9FF9FE7F9FE7F9FE7F9F4B
-:10198000FA8FFDABFADABFAFB3FDFFBFFBFEFFBFBF
-:10199000EFFBFEF7BFFF9FFF77F7BDFD77DFFF7E11
-:1019A000DFEDBBFEFFBEEFFBFEFFFA3FFFBE6F8F1A
-:1019B000E6F9FE7F9FC7FE7F9FE7F9FE7F9FE7FB6B
-:1019C0007FFF7FCFFFFDFFFFDFFBAFBFEFFFFEFF1E
-:1019D0009FEFFBFFFCFFFBFEFFFFFFFFFEFFFFF79C
-:1019E000FFFFFFFFFFFFFFFFFFF5FFFFFF3FDFF7F9
-:1019F000FFFF7FEFFEFFBFFFFBFFFFBFEFFFB37FE8
-:101A0000FF7B5EF7FDFF7B7FF7FF7FDFF7FDFF7F4B
-:101A1000DFF7FF17FFFFFF7FFFFFDDF6FCBFCBF215
-:101A2000BCBF2FCBF2FCBFFE8FFFFA7EBFA7EBDA65
-:101A3000FCBFAF7AFEBFAFEAFAFEBFAFF4DFFEFF36
-:101A4000F33C7F3EFFCFF8BF8FE3F8FE3F8FE7E820
-:101A5000FFFC9FFFFFCFEBB3E7FB7BF3FEFFCFDB8A
-:101A6000FBFBBF6F6FDFEC7FFFFFF7FDFDFFFFFFAD
-:101A7000FFB2BFFFDEFDBDEFFBF6DFEAE7DBFEBB3B
-:101A8000FFEBFBBF9F8FE8FE3F8FA3F8FE3F8FFF6A
-:101A9000F87EFDFD7FFFFBCDFFFDFF5FEFFDFFFF4C
-:101AA000DFF7FDFFBE90FFFFEEFF3FBFF3BBFEB7CA
-:101AB000ABFAFEAFADEAFADEABFF63FFFEF2FFB3B7
-:101AC000FFDFEE7DFF03F1F43F1FC3F1EC7FFE6FFC
-:101AD000FFFBFBFF9FFFBFFF7B5FFDFFDFF7FDFD10
-:101AE0007F7FDFFECFFBFFFFAFFBFF1FEFA5FDBF3B
-:101AF000DFFB7DFFBFDFFBFFFD3BFFFFFFFFFFFDC8
-:101B0000AFF3FFFB7FBFD7FBBF7FBBF7FFF87FFFC4
-:101B1000FA5FD7FFDF7FEFFFFF7FDBF7FDFF7FDFA0
-:101B2000B7FBECFFFFF7BFEFFDFCFBFFEFF0FE3F65
-:101B30008FE3F8FE3F8FEF8DFFFFEF7FBFFFFBFFCF
-:101B4000DBBFFFFFFFFFFFFFFFFFFFEFD8FF2E7F91
-:101B5000BEEFFE6EFFBFF9FFFFF3FFFFFFFFFFFFCA
-:101B6000FC66BE47F37FDFFE879FFFFFFFFFE7FFB7
-:101B7000FFFFFFFFFFD66F7CFB4FD2FFFD2BFEFF69
-:101B8000FFFD5FD7D5F57DFFFFFFBF9BFFFFDFB7F1
-:101B9000FFFFDFFF3FCFFE7FBFEFFBFCFF3FFFD923
-:101BA000BFFE97EC8FB7FE9B7DFDB7DD771DC7713C
-:101BB000DD775DD7F36FFD3F73DDAFFD7AFFFFAFDC
-:101BC000FEFDBFEFFBFEFFBFEF667FFFFFBFBFFF66
-:101BD000FBFFF7DFFDFB7DDFB7CDF37C5F3F913F80
-:101BE000FF3DEF7BFFFCFFCAEFFEFFBDEFFB1EE7F3
-:101BF000BBEC7FB3FFFD9FFFFFFEFFFF7FBFFBFE40
-:101C0000FFBFEFFBEEFBBFDF67FFFFBFEFDBFFBCFC
-:101C1000FE7FFBFF9FEFF9FE7F9FE7F9FE87FFEE58
-:101C2000FBBEE5BFEFF9D765F7DDE77DDF775DD771
-:101C30007FF89BFEFFBFEFFBFFFFBFEFFBFF7FCFF8
-:101C4000F3FCFFBFEFFFDB3FEFFBFEFFDFFFFEFB21
-:101C5000BBEFBFEFBBEEFBBEEFBBFFFC7FFD3B5B13
-:101C6000D6E5FD4FC3FBFFBFEFFBFEFFBFEFFBFF62
-:101C7000B4FFFABC8FB2E9D22ECFFBFFBFEFFBFE61
-:101C8000FFBFEFFBFFECFFFDFD7FDFF7E4DF5FFF52
-:101C9000FFFBFFFFFFFFFFFFFFFFC3FFEFE6F8FEC5
-:101CA0003F8B83F9FE7FE7F9FE7F9FE7F9FE7F1701
-:101CB000FDFFFFFF7F5FF72CFFFFFFFE7FFFE7F9D0
-:101CC000FE7F9FFE2FFFFFEFFFFEBFEFADFFFF7F09
-:101CD000FFFFFFFFFFFFFFFFFEDFFFDFFFFDFD7FD9
-:101CE000DFF7FFFFFFFFFFFFFFFFFFFFFFFA3FFEF2
-:101CF000F7FDEF7AFFB1BDFF7FF7FDFF7FDFF7FD57
-:101D0000FF7FF327FFDFFFDDFFFC9BFFCBFCBF2F37
-:101D1000CBF2FCBF2FC9FFDEFFDFAFEBDAFEBBAFBC
-:101D2000EBF8F7AFE8FAFEBFAFEBF2FFFDFFFFEF16
-:101D3000BDD7BFFFFFDE8FB8DE378DA378DA3F8FC8
-:101D4000FFA1FFFFFBFBFFFFFFFFA7BDFB76FDBF72
-:101D5000EFDBFEBBBFFE277FFFFEFEFDF5FFEFF5CD
-:101D6000DF1FE7FDFF7FDFF7FDFFFFCDFDAEFFFAD1
-:101D70003E3FABFDF87E8FE3F8FE3E8FE3F8FFFEBB
-:101D80001FEFDFBFFEDEDFD9FFDFBCFFFF7FFFEF0E
-:101D9000FD7FDFF7F93FFEFFFF6FFEDEBFF7EDEAE5
-:101DA000FD8F83F8EA3F8FEFFFF47FFFEFEF7BF3C8
-:101DB000F15FFFFFF13B7FDFF7FDFFFFFFFFE0FF7C
-:101DC000FFFFF7FF6FFF7FFFFFF7DEF7BFEFFBF7C8
-:101DD000FDFFFFF5FAFFFFFBE7FFF3F87FF3DFFFFF
-:101DE000FFFFFFFFFFFF1FEFBBFFFFFFFFFFFFFD39
-:101DF000FF7FFF9FFFFFFFFFFFFFFFCFFF37FFFFCB
-:101E00007FDF775DE7FCFFBFF7F5FBFFFFD7F5FB53
-:101E1000FFFF45FD7FEAFDBEBFDFF7FFFFDBFBFEF7
-:101E2000FFBFEFFFFFFFFB5F7FFFFEFFFFFFFFFF37
-:101E3000FFFEFFEFFDFF7FDFFFEFFBF80FF3FFF982
-:101E40002EFBFEFCF3EFFFFFBFFFFBE7FFFE7EFF75
-:101E5000C06BCFFF34DFF1FDFFEFFFFFFFDFF7FDCA
-:101E6000CF7F9CFDFD6CF7FFF6FDEB2B9FFFFCFE8B
-:101E70007EFFFFFFFFD7F3F7FFFBE1BFFFEB7ADE4B
-:101E8000D7FBFFF9FEFFFFF3DE7FFDE77FFFFDBB22
-:101E9000FFFF7ECCF6AF5F7FFEF47DF7FDBB6EDB10
-:101EA000B7FFF7DF66FFFFF73DCFDEBDFFFFDEDBED
-:101EB0008DF77EDFB7EF7FFFF687FFFFEFFEDEBF18
-:101EC000FFFFFFBBEFFDFF7BDEF73FFFBFFBDBFF4D
-:101ED000F2B6FDBD7FE7FFFFFF6FF7FFFFFFFE7765
-:101EE000FFBFF8AFFFDFBFFFBF7FFBFFFFFFDBFEE2
-:101EF000FFBFFFFAFFFDFFF67FFF9FFFFF3FEFF8F9
-:101F0000EE7E9FBAFEBF8FEFFEFEF9FFFA7FFE7EE8
-:101F1000BFAFFB96FD9FEF5E65BEEF5BB6FFBEE316
-:101F2000FFB5BFFFFDFF7FFFEFDFFEFFBFFBFEFF43
-:101F3000BFCFFFFFFFFD9BFFFEFBFEDFFF7FFFF735
-:101F4000FEFFDFFBFBFEFFFFFFFFFFB7FEFAFFAB6D
-:101F5000EFFFFDB57B7FFBF7FDFFFFDDFFEF8FFFA1
-:101F60002FFFFB7CFF3FDF73EBFE3FFFEFFBFEFF2E
-:101F7000EFFDFFBFFD0FFFFFFFF5F9FF7FD7FDFF6F
-:101F8000DFFFF7FBFF7FBFFFFFF09FFFFE7F8BE3CD
-:101F9000F9DE279BE6BE7F9BC3F8DE7F9DE7FE7FD1
-:101FA000FFFF5FD7FFFFFF4FFBFFFF7FFFAFFF9FED
-:101FB0007FFBFFE8FFFFFEBFAFFFFFFEBFEFF7FFB6
-:101FC000BFFFFFFFFFFFF7FFFCFFFFFD7FFFFFFFEE
-:101FD000FD3FCFFFFFFFFFF7FFFD7FFFFF93FFFFF9
-:101FE0007ADFF7FFFF7B7FB7EFFFFFFDBFFDFBFF52
-:101FF000F7FFD7FFFFFFFC9F6FCBFFF4BBDFD6FDE2
-:10200000BF2FD3F7FFDFFFCFFFFABEBDAF6ADABE47
-:10201000BBAB3ABE2DAEEBDAF63FADF5DDFFCFF14F
-:10202000FFF97FFF73FEFFCFC3F4F72FF3FFFCFF31
-:102030007C1FFF3F4FFF7EFFEFBDF6FEFF2BEFDC67
-:10204000FBFDFFFBFFEA7BFFFFFFFFFFFBF7DFFF6F
-:10205000E37DFFB7FFBFFFFFDFFFF8FFBFFFBFEB71
-:10206000E7FAFE3DBFE9FCBFFFFAFBFEFFFFFFD929
-:10207000FFFFFFF67FFFF67DFFDFCFFDBFFBEF7EAB
-:10208000FF7FFFFFD3FFFDFBFFFBFFFFFFEFFFBF66
-:10209000FEFFF7EFFFFFFFFBFF87FFFDFFFFFFFFE7
-:1020A0007BFEFFFE3BF7F7FF3FFFFFFFFFFF0FFF4A
-:1020B000FFFFFFFBFFFFFFF7FFFFADFFFEF7FFFF97
-:1020C0005FFFFFDFFFFDFFF5FFDFFFBDFFE9FFC79C
-:1020D000F3FFFFF7FFF3FFF83BFFFF7BDFBFFBEFF3
-:1020E000FBFFFBF7F7BBFFFFFFFFFBFFFE7FF37F6D
-:1020F0005EB7BFFD7FFFF97FFBFFEBFD7F7FFFEF4B
-:10210000FBE03FFEBFBFDFFF7EFFF7FFFFFEBFFF2D
-:10211000DB78FFFFFFEEA1BFF5DEFBF7FFFBFFFF64
-:10212000FFFFFBFFFFD7FFFFFFFFEFF0FFFFFFF316
-:10213000F7FFEFFFE7CFFFFBFFEFFFFF9F9FEFFCF6
-:1021400016BFFEF3E4FFFFC6FFE7FFFFFDFFBFFF83
-:10215000FF3FFFBFD6AF7FFE6B7E7FFFAFFFFFBFAE
-:10216000FF5FFFFEFFFFFEFFFFBDDBFFFE5FF2FF35
-:10217000FF5FFFFFFFFFFFFFEF7FFFFFFFFFDEBF00
-:10218000FFFFEFFB77FEBD7F5FFFFFFFDF6FEDFF20
-:10219000FDFF7FFD6FFFFF77DACFFD5FFFBFFFFF22
-:1021A000DF7FFFFBFFFFFFFF667FFFFEBFE7BFFA9A
-:1021B000FFFEFFFFFFDFFF59EFFFEFFB7F89FFFF10
-:1021C000E9FF6FFFF5FFFFFFFFFF7FF2F7FFFFEF74
-:1021D000F87FFBFFFDFFFFD9FFEFBBFFFFFFBFEF66
-:1021E000DEFFFF9F7FDFFFF7FFFFFFFFDFFFFFAF98
-:1021F000FFFFF73FEB9FFE7F9E7F9FFE87FFEDDB9C
-:1022000056FFBFAF0BD2FFEFDB6E7DBD6FF8FE3F19
-:10221000FA5BFFFDBFEFFFBF6FDBE6FFFF3FFFDFB6
-:10222000FEFFFFFFFFDA3FFFFBFEFEFFFFDFF7BD14
-:10223000FFFDFFFEFFFBFFFFFFFFF15FFD9FDFFDE7
-:10224000FFFD7FFFFFFFFF76FAFFFF7FE3F8FFAEA2
-:10225000FFFB7E9D73FFFA7FDFFFFF7FFFFBCDFF5C
-:102260007FEFFBFFFDFFF77F7FEFFFEDFFFFFFB588
-:10227000FFBFFFBFFDEFDBF7FF93FFEFE2F9BE7F8C
-:102280008BE7F9FE6BE7F9FE7F9FE7F9FE7F47FFDB
-:10229000FFFDFF9FFFD7FFFFFFFFF5FF9FFFF7FE4B
-:1022A000FFBFFE6FFFFFFBFFFFFFAFFFFFFF7FFBE7
-:1022B000FFFEFFFFFFFFFFFDDFFFFFF7FFFFFFDF79
-:1022C000FFFFFF5FFFFFFFFF5FFBFEFFF837FFFF32
-:1022D000EFFF7FFEBFFFFFFEBFFFFF7FFFBFFDFFE2
-:1022E0007FFA7FFFFF6FFFFF7DFFCFFFFFFF4FFFF5
-:1022F000F2FFFFFFFFFFFABFFFAEEBFAFEBBADEB55
-:10230000FAF7AF6BFAF6BF25E9F27F45FFFFFDF75D
-:10231000F7BFFFDFFFFFBFFBFFDFF3FFF73FCFFF9D
-:10232000A1FFFFBFE7FFFF7FFF3DFFFFFFF7FF2F8D
-:10233000FFFBF57FFE57FFFFFFFFFFFFFFFFFFF7EC
-:102340003FFFFEFFFFFFFDFEF7EEAFFEEEE7FAFFF9
-:10235000FE9DF95EFEFFEBFFFFDFA7FFFFFFFCDB4B
-:10236000FFFFFF7EFBFFFFEFFBFDFFDBFFFFFFEF4C
-:10237000FFFFFFFDBFFEBFFF6F7FFFF7FFFFF9FF0E
-:10238000F7FFBFDEF7FFFFFFFA7FFDBF5FFFFFBF75
-:10239000FFEDFFF7BFFFFFEFFFDFFFFFFFE6FFFBF4
-:1023A0007FFFFFFFFFFFF7FFFFFFFFFFFFFFEBFFD9
-:1023B000FDFFF5FFF67FDFBDCFFFFFFFFFDFFFFF74
-:1023C000FFF9FFFFFFFFFFE3FFEEBFFF7DEFFEFF23
-:1023D000FFFFBFFFFFFFFFFEFFFFFFFFE7FFB5AE01
-:1023E000FFFFB6FEBFFFFFBFFFFFFFFFFFFFFFFFC7
-:1023F000FF27FFEFFE7FDFFF7EFFFFFFFFFFFFFFF7
-:10240000FFFFFDFFF7F99FFF5FFFFFFFFFFFFF7F6C
-:10241000FFFFFEFFFFFFFFFFFFFFFF0FFFE7BFFE16
-:10242000FFBFFFFFFFFFFCBFFFFFFEFFFFFFFFC47B
-:102430006BFF291FFBAFFFFFFFFFFFEF1BFEFFFC42
-:102440006FFFFFFD6AF7D7F5BFFFFEFFFFFFFFFF3E
-:10245000FEBFFFFFFAFFFFF7FBDDBFFFE7FFFFFF58
-:10246000FFFFFFFFFFFD7FFFFFF5FFFFF7FDB3EF6E
-:10247000FD7E5DFFFDFFFFFFFD7FD2F5FB7ECBB74D
-:10248000FFFFFFC6FFFDEE63FFFFFFFFFFF6FD65E9
-:102490005BDFFFD5FFFFFFF6E7BFF7A9FFFFEDFF0B
-:1024A000FFFFFFFFEBFFFFFFAFFFFFFFF81BFFE3A7
-:1024B000D0BFFFE1FFFFFFFFFFD7FFFFFF5FFFFF81
-:1024C000FFFFAFFFDB76BFFF7FFFBFEFFEFFBFEF7A
-:1024D000FBFEFFFFFFBFF27FFF9FFEBDFE7FFFFF02
-:1024E000FFFFFFFFFFFFFFFFFFF73FEC7FF695BB0E
-:1024F000EFF8FEFCBF2FDAFCBF2FCBF2FCBFEFFFE3
-:10250000A9BFCFFBFFFFFFFEDDB76DF6D9B66D9B10
-:1025100076D9BFFBFDA3FFBFEFFFEFFFFFFF7FDF1C
-:10252000FDEF7BDEF7FDEF7FFFFF05FFFAFE7FEF9C
-:10253000E3FFFFFD7FFFFFFFFF5FFFFFFD7FFBAFBF
-:10254000FF63C8FFBFEFFFFFFA7FFFFFFFFE9FF7AC
-:10255000FFFABFFE9FFB7FFFFFEFD7FFFFF5FFFFF7
-:10256000FFFFFD7FFFFFBFFFF9BFFFBE279FE7F91A
-:10257000FE7F8BE7FE7F9FE2F9FE7F9FE7F17FFF03
-:10258000FFFFFBFEFFFFFFD7FFFFFFFFF5FFFFFF92
-:10259000D7FFFAFFFEFFFFFFFDFFFFFFAFF7FFFFD3
-:1025A000FFEBFFFFFFAFFFC4FFF7FFFFEFFFFFFFF2
-:1025B000FF5FFFFFFFFFD7FFFFFFFFFFEBFFFB7A90
-:1025C000DFF7FDFFFFFEBFFFFF7FFFAFFFFFFFF75E
-:1025D000EFE3FFDDD2FFDFFFFFF2FCBFCBF6FDBF75
-:1025E0002FCBFF7FDFDEAFFFDAEEBFAFE9FAF4BD3E
-:1025F000AF5AAEBBAB6BDADEBFADD75EFFFFBFFC41
-:10260000FFDFFDFFFFFFFFDFF7FFFFFFFFFDFFFA2B
-:102610001FFFFEFBEFBFFDFFFDBD77FFFFFFFF9D2F
-:10262000EFFFFFFFEF7DFFFBFEEFFFFFFFFFFFF779
-:10263000FFFFFFFFFFFFFFEEBFE4FBFFFE3FFEFFDC
-:10264000FFFFFFAFEAFEBFAFEBFAFEFFFFFF55F65D
-:10265000FFFEF7FF7FFFEBF75FC5FD7F5FD7F5FF5D
-:102660006FFBFF8AFFFFFFFFEBFFFFFFFFFBBFBF1B
-:10267000EFFBFFFFFFFFFBFF77DFFBFFFD7FEFFFC0
-:10268000FFFFBF7FFFDFBFFFFBFFFFFFFEEFDFFFAF
-:10269000FEFF9FEF7DFFF7FF7FFFFFDFF7FDFFEFFF
-:1026A000DFFFDFFFFFFFFFFFFFFFFFFFFDFFFFFB80
-:1026B000FDFFBFDFD1FFF83BFFFFFFFFFFFFFFFF85
-:1026C0007EDBFDFF77DBB77DBFFBFFF87FED7B5E39
-:1026D000FFFEFFFF4FD7FD7FDFD7F5FF7FFFFFFF37
-:1026E000F23FFEFFBFFFFFFFFFBFEFFEFF3BEEFF2E
-:1026F000FCEFFFFFFF85FFFDFEFFF5FFFFFEFFDFA5
-:10270000FBFF5FBFFFFDFFFFFFFFA8FFFF9F9EFFD7
-:10271000FFFF7FF3FFFFCFFFF7FDFF7FFFFFFC16FB
-:10272000BFCFA3E5EF7FFFF3E4FFCF93FCFF3FCFE5
-:10273000FFFFFFD60F7DBF6EFBF4FCAF6DDB77B7FD
-:102740006DDBF6FDBFFFFFFFBF9BFADEB7B7EDF90C
-:102750007EB7ACEBD6B3ADEB7ADFFFFFFFD8BFFFA0
-:10276000B7ED9F6FDDF768DB37B36CDB36CDB37F3A
-:10277000FF7FF56FFDEF793DF793E47A9EADEA7A3E
-:102780009EF7BDEFFFFFFF767FFBC6FFBBEFDAFED4
-:10279000FDBFFBFEFFBFEFFBFFFFFBFFA5FFFDAB98
-:1027A0006F78DE178F79DFFDFF7FDFF7FDFFFFFB1F
-:1027B000FFFBFFEFFBEFFBFEFFBBDAF3EF3BCEF3DC
-:1027C000BCEF3FCFDFFFB7FFFFFFCF73FFBFEFFFD0
-:1027D000F3FF3FCFF3FCFF3DCF9FFE07FFAFEBFEC4
-:1027E000FDBFEFEBFAFFAFEBFAFEBFAFFBFE3FFB27
-:1027F0009BFF7FDFFFF3FEFFDEF7BF7BDEF7BDEF62
-:102800007BFEFFFFDF3FFEFFB7FFEFF7FFBFEDFEF1
-:10281000DFB7EDFB7EDFFFFFFFFD5FEFEBFAFEF5BD
-:10282000BF6FFFFFFFFFFFFFFFFFFFFEF8FFA8FFE7
-:10283000FFBFEFFB6AFBB7EFFBFFBFEFFBFEFFBF86
-:10284000EFFBFFE0FFFFFD7F5CD77DDFF35CF5CDA5
-:10285000735ED7B5FD7FEFFFDBFFFFE2F8BE2F8F82
-:10286000E7F8BE6BE2F8BE2F8BE2F9FE7FE7FFD7F9
-:10287000F5FD7FFFF7F5FD7FD7F5FD7F5FD7F5FF0E
-:10288000FFFF8FFFAFEBFAFFFFBFEBFAFF2FEBFA73
-:10289000FEBFAFEBFFFFFE5FFF5FFFFFFDFFFFD758
-:1028A000FFFFFFFFFFFFFFFFFFFFFFFFBFFEB7FDC3
-:1028B000FF7EDFF7ADFF7FF7FDFF7FDFF7FDFF7FD7
-:1028C000F67FFFFFFFDBF6FCAFFFFFFFFFF7FFFF29
-:1028D000FFFFFFFFFFECBFFFAFEBFAF6AB8FEBFAAA
-:1028E000F7A5EBFABEBFAFEBFAFF6DFFFF7FDF335B
-:1028F000DDFF7FFEF7FC7FFBFFFFFFFFFFFFFFA970
-:10290000FFFDFFFFFEFFFFDFFFFFEFEFFDFF7FFF9C
-:10291000FFFFFFFEA7FFFFFF77DFF7FD9F7FFE773B
-:10292000EFFFFFFFFFFFFFFFFFAFBFAFFFF9BEBF2E
-:102930008FFBFEFEEFFBFEFFBFEFFBFFFFFDDF6F38
-:10294000EFFF7FFFBFBFDFFFFCFFDFF7FDEF7FDFA4
-:10295000FFFFFF3FF6FFCFFFDBFBF7FFEB7AFFFF49
-:10296000FFBFEFFBFFFFFFFE6DFDFF5FFBFFFFF70C
-:10297000FF5FF5FFFFFFFFFFFFFFFFFFF8FFFBFF1C
-:10298000FFFDFFFFFFFFE7F6BFFFFFFFFFFBFFFFBE
-:10299000FFC9FFFFFFBDFFBFAFEFEF3FD1FC7FFBE4
-:1029A000C7FFFFFFFFFFE3FFFFFFFFFDFFFF77FF15
-:1029B000DFB7FDF7FDF7FFFFFFFFFF57FFF7A5FDAF
-:1029C0003FDFBFBFFE7FFFFFFFDFFAFDFFFFFFFE20
-:1029D00087FFE9FFFEEFBFEFFEFEFFEFFFFFFFFF08
-:1029E000FFFFFFFFFA9FFF3FFFFDFD57DFFDF3FFF6
-:1029F000DFFDFF5FDFF5FDFFFFF98FFFFFFFEE7FDC
-:102A0000FFFFBF5EFEECFB3F7F9FEFF9FFFFCD6B4B
-:102A1000FFFFFFC5F3FCFA38FFAF3FEE7F9FFFD902
-:102A2000FFFFFD7AF7FFF3FFAF6FDBF2B9E9FBFFC2
-:102A3000FFFFFEFFFFEFFFFBC5BFFFEFFF5EB7AD80
-:102A4000CD797CFFFFFFFFFFFFFFFFFFFD93FFEF4F
-:102A5000EAFEBFEF5BD2CDF56D77DFF7FDFF7FDFDD
-:102A6000FFFF66FFD5657D5F759D657FD6FB4FFFD8
-:102A7000FFFFFFFFFFFFF6C7FFBFEFFAFEFFBFEB51
-:102A8000FFDFFF7EFFFFEFFD7ED7FF78DFFF5FDF19
-:102A9000F5BF7FDFC5FF3FF67EFF0FEFF23EBFFFC2
-:102AA000FB3FFFFB7FFFB3FEFBF6FDFFDAF7FDFF09
-:102AB0007FDFF7BFFFFA7FFFFFFFFF9FFFF3DCF928
-:102AC000BFCEE7F9FE7F9FE7FFFFE27FFEFFBFEF8C
-:102AD000EBFAFF9F671EFF8FE7F8FE7F8FEFFFBDCA
-:102AE000BFFFFBFFFFDFF7FFFCFFBFFFFFFFFFFFA5
-:102AF000FFFFFFFDB3FFFFEFFFFFBFEDFFFBEEFEAC
-:102B0000FFFFEFFFFEFFFFFFFFB5FFB7FDFD6EFF0D
-:102B1000FFFEFD2FD8FEBF8FEBF9FE3FFFFACFFF80
-:102B2000E7D9FABFDF77FCFB3FABFEFFBFEFFBFE51
-:102B3000FFFFEE1FFFDFF7FFFFFF5F9735BF5EFE72
-:102B4000BFEFFFF7FDFFFFFABFFFBE6F9FE7F8BEC5
-:102B50002F8B66947D9DE7F9FE7F9FE7F17FFFFF56
-:102B6000FFF7F5FD7F5FFBFD9EFFFBFEFFFFEFFF25
-:102B7000FFA0FFFFFFBFEFEBFAFEBFB7F7F7FFFFC6
-:102B8000FDFFFFFFFFFFDDFFFDFFFFFFD7FFFFFFA3
-:102B90007FF5FFFFEFFFFFFFBFFFFFABFEFBFEFF79
-:102BA000F7AFFFFFDEF7EB5FDFF7FDFF7FDFFFFF34
-:102BB000B3FFC9FEFFFFFFFFD6FFFFCBFFFFDFFF25
-:102BC000FFFFFFFFFC8FFFBABEBFAFEB78FEB7ADD4
-:102BD0003AFEB7AFEB7AFEBFAFFF9FFFFFDFFCFF10
-:102BE000FFFEC3FEFFFF33FCFFBFDFF3FFFFBB9F12
-:102BF000FFFFFFEBDFFFFFAFF76FF9BFEFFDFFFF59
-:102C0000FFFFFFE37FFFFFFFFBFFFFBFFDFBF7FFC2
-:102C1000DFF7FFFEEF5FBDFFFAFFF8FFBFAFFBFE80
-:102C2000FE3FEFE8FFDFF3FDFFFFFFFFFFEDFFFBE0
-:102C3000FDFFAFFFFFFEFEBFDBFFFFFFBFFFDFFFBC
-:102C4000FDFFCBFFFFFFFFFFBF6FFF7FB7B3FFFFAE
-:102C5000DFFFFBEFFFFFFF07FFFBFFFFFFEDFFF5D0
-:102C60007CFF7FFEFFFFEFCFFFFBFFFF2FFFFFFF8C
-:102C7000FFF3FFFBFFFEFFFFFFFFFFFFBFFFFFFFB5
-:102C8000FD1BFFFFFFFFFFFFFFFFFE7CFFFFFFFFBE
-:102C9000EFFFFFFFFFFBBF7FFDFFFFFFFFFFFFFF1A
-:102CA000DBFFFFFFFFFFFFFDFFFFF07FFFFFFFFFE9
-:102CB000FFFFFFFFFFFBFFDFFFFFFFFFFFFDBFFE8B
-:102CC0007FFFFFFFFFFFFFFFFFEFFEFFBFFFFFFFE5
-:102CD000FFFFEFFAB5FFFFFFF7F7FFFFFFFFDFFB97
-:102CE000FCFFFFFEFF7FDFBFFFCBBFF9FE7F9FE74B
-:102CF000F9FE7F97E1FE799FE7FDFE7FDFFE37FF5C
-:102D0000FBDEDEBDEFF3FEFBAFEBFEFFFFCFFFFE12
-:102D1000FFBFFF8FFFEFFBFEFFBFE7F95E7FEFFB1B
-:102D2000DAFFBFEFFBFEFFFD1FFFFFFFFFFFFFDF2F
-:102D3000FFFF7FFFFFF7FB7FFFFFFFFFFC3FFFBFB2
-:102D4000EFFBFEFFBFEF7B7FBFEFFBFEFFB5EFFBAF
-:102D5000BFFA7FFCFF3FCFF3FCFF3FCFBCFF3FEF4D
-:102D6000F3FCFE3FCFFFEEEFFBFEFFBFEFFB6AD7AA
-:102D7000B7FBF8FFB7EFBAFEFFBF7FE9FFF97E5F51
-:102D800097E5F9FE7FBFF97E5F9FE5FBFE5FB7FF2A
-:102D9000A3FFF7FDFF7FDFF7FDFF5EF77DFF77DF26
-:102DA000F7FDFF7FFFD7FFFFFFFFFFFFFDDFFB7F8B
-:102DB000FFFFEFFFFEFBFFFFBFFE8FFFDFF7FDFD15
-:102DC0007FDFF7FD3EDFF5BDFF7FDFF7FDF7FF9FFC
-:102DD000FFFFFFFFFFFFFFFFFFFDFFBEFFFFFFFF46
-:102DE000FFFFFFFD3FFFDFF7FDFF7FDFF7FDFFCFB9
-:102DF00077FCFF5FDFF7FDFFF47FFFFFFFFFFFFFC3
-:102E0000FFFFFFFFFFFFFFFFFFFDFFFFFFEEFFFFE5
-:102E1000FFFFFFFFFFFFFFFFEDFBFFFFBFFFFFFF18
-:102E2000FFFFE9FFFFFFFFFFFFFBFFFFFFD3FFFFF8
-:102E3000BF3FFBFFFFFFFBF3FFFFFFFFFFFFFFFFB6
-:102E4000FFFFFFFFFFFEFFF7FFFFFFFF17FFFFFF83
-:102E5000DFFFFDFFFFFFFFFFDFDFFFFDFFFFDFF70E
-:102E6000FF4FFFFFFFFFFFFFFFFFFFFEFFFFFFFD25
-:102E7000FFFFFFFFFEFF9FFFFFFFFFFFFFFFFFFFC3
-:102E8000FDFFFFFFFFFF7FFFFFFF7A3FFFFFFFFF19
-:102E9000FFFFFF7FFFFFFFFFFFFFFFFFFFFFFFF2CF
-:102EA0007FFFFBFEFFBFEFF8FEFFBFFBFEFF8FECD7
-:102EB000FBFEFFBFF8F7FEFFBFEFFBFEFDBFCFEC51
-:102EC000FF3FEFDBF8FFBFCFFFF9FFFFBFFFFBFFC7
-:102ED000FFFFEFFBDFFFFFFFFFFFBFFFFFFFBBFFBA
-:102EE000EFFBFEEFBFEEEBFBFEFFEFFEEEBFFEEBF8
-:102EF000FFEFFF17FF7EEBBBFEBFBEFBEF5BF7BD37
-:0A2F0000FBCFBFBFBBFB7ECCEFFF91
-:00000001FF
-
- * Copyright (C) 1999 BayCom GmbH
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that redistributions of source
- * code retain the above copyright notice and this comment without
- * modification.
diff --git a/firmware/dabusb/firmware.HEX b/firmware/dabusb/firmware.HEX
deleted file mode 100644
index 7c258df..0000000
--- a/firmware/dabusb/firmware.HEX
+++ /dev/null
@@ -1,649 +0,0 @@
-:02000000215786
-:0300030002016691
-:03000B0002016689
-:0300130002016681
-:03001B0002016679
-:0300230002016671
-:03002B0002016669
-:0300330002030FB6
-:03003B0002016659
-:03004300020100B7
-:03004B0002016649
-:0300530002016641
-:03005B000204BDDF
-:0300630002016730
-:03010000020C5A94
-:030104000201ED08
-:030108000202519F
-:03010C0002027C70
-:030110000202E404
-:0101140032B8
-:0101180032B4
-:03011C000205FDDC
-:03012000020000DA
-:03012400020000D6
-:0301280002043C92
-:03012C0002046A60
-:03013000020000CA
-:03013400020000C6
-:03013800020000C2
-:03013C00020000BE
-:03014000020000BA
-:03014400020000B6
-:03014800020000B2
-:03014C00020000AE
-:03015000020000AA
-:03015400020000A6
-:0A01570075817FE5826003020161FB
-:0501610012076F21648C
-:010166003266
-:0E016700C0D0C086C082C083C0E0907F97E009
-:0E0175004480F0907F69F0F0F0F0F0F0F0F0D0
-:0E018300F0F0F0F0F0F0F0F0F0F0F0F0F0F04E
-:0E019100F0F0F0F0F0F0F0F0F0F0907F97E07A
-:03019F00557FF099
-:0E01A200907F9AE030E423907F68F0F0F0F058
-:0E01B000F0F0F0F0F0F0F0F0F0F0F0F0F0F021
-:0E01BE00F0F0F0F0F0F0F0F0F0F0F0F0F0F013
-:0E01CC00E5D8C2E3F5D8D0E0D083D082D0864B
-:0301DA00D0D03250
-:0801DD0075860090FFC37C054C
-:0701E500A3E582458370F9D8
-:0101EC0022F0
-:0E01ED00C0E0C0F0C082C083C002C003C0D01A
-:0E01FB0075D000C086758600E591C2E4F591CE
-:0D020900908800E0F541907FAB7402F0900A
-:090216007FAB7402F0E5326021B7
-:04021F007A007B00E6
-:0B022300C3EA9418EB64809480501232
-:0E022E00907F69F0F0F0F0F0F0F0F00ABA0006
-:02023C00010BB4
-:02023E0080E35B
-:02024000D08666
-:0E024200D0D0D003D002D083D082D0F0D0E054
-:01025000327B
-:0E025100C0E0C0F0C082C083C0D075D000C035
-:0E025F0086758600E591C2E4F591907FAB7440
-:04026D0004F0D08643
-:0B027100D0D0D083D082D0F0D0E0329B
-:0E027C00C0E0C0F0C082C083C002C003C00456
-:0E028A00C005C006C007C000C001C0D075D0BE
-:0D02980000C086758600E591C2E4F59190E6
-:0C02A5007FAB7408F0756E00756F0212DC
-:0602B1001144757039755F
-:0602B700710C75720212C9
-:0C02BD001175907FD6E4F075D820D08633
-:0E02C900D0D0D001D000D007D006D005D00490
-:0D02D700D003D002D083D082D0F0D0E0322E
-:0E02E400C0E0C0F0C082C083C0D075D000C0A2
-:0E02F20086758600E591C2E4F591907FAB74AD
-:0403000010F0D086A3
-:0B030400D0D0D083D082D0F0D0E03207
-:0E030F00C0E0C0F0C082C083C002C003C004C2
-:0E031D00C005C006C007C000C001C0D075D02A
-:0C032B0000C086758600756E00756F02BC
-:0703370012114475704075BE
-:06033E00710C7572021241
-:0E0344001175907FD67402F0907FD67406F08B
-:0503520075D810D086F3
-:0E035700D0D0D001D000D007D006D005D00401
-:0D036500D003D002D083D082D0F0D0E0329F
-:0D037200907FA57480F0907FA6749AF01221
-:0C037F00101B907FA6E542F012101B90AE
-:0D038B007FA6E543F012101B907FA5744083
-:01039800F074
-:010399002241
-:0D039A00907FA57480F0907FA6749AF012F9
-:0C03A700101B907FA6E544F012101B9084
-:0C03B3007FA6E545F012101B907FA6E528
-:0B03BF0046F012101B907FA57440F068
-:0103CA002210
-:0A03CB0075440275450075460012E6
-:0903D500039A75420375430012FE
-:0203DE000372A8
-:0103E00022FA
-:0C03E100908800E536F09088007410252C
-:0903ED0036F01201DD75420175C4
-:0903F600431812037275440275EC
-:0903FF00450075460012039A75D1
-:08040800420375434412037224
-:0104100022C9
-:0E041100C0E0C0F0C082C083C0D075D000C073
-:0E041F0086758600E591C2E4F591907FAA747F
-:04042D0002F0D08683
-:0B043100D0D0D083D082D0F0D0E032D9
-:0E043C00C0E0C0F0C082C083C0D075D000C048
-:0E044A0086758600E591C2E4F591907FA97455
-:0704580004F0753001D086AD
-:0B045F00D0D0D083D082D0F0D0E032AB
-:0E046A00C0E0C0F0C082C083C0D075D000C01A
-:0E04780086758600E591C2E4F591907FAA7426
-:0704860004F0753101D0867E
-:0B048D00D0D0D083D082D0F0D0E0327D
-:0E049800C0E0C0F0C082C083C0D075D000C0EC
-:0C04A60086758600E591C2E5F591D086D0
-:0B04B200D0D0D083D082D0F0D0E03258
-:0E04BD00C0E0C0F0C082C083C0D075D000C0C7
-:0C04CB0086758600E591C2E7F591D086A9
-:0B04D700D0D0D083D082D0F0D0E03233
-:0C04E200907FEAE0FA8A20907F96E4F018
-:0104EE0022EB
-:0704EF00907FEAE0FA8A2188
-:0104F60022E3
-:0E04F700901713E0FA901715E0FB74802AFAB4
-:0E05050074802BFBEA0303543FFCEAC423542A
-:0E0513001FFA2CFAEB0303543FFCEBC42354F5
-:0B0521001FFB2CFB90170AE0FC60029F
-:02052C007A0053
-:07052E0090170CE0FC6002D5
-:020535007B0049
-:0B053700EA2BFCC313F53A7544028B5D
-:07054200458A4612039A7579
-:090549006E08756F001211447573
-:040552007047757108
-:080556000C757202121175858B
-:05055E003A731211A028
-:010563002275
-:0E056400907F96E0FA907F9674806502F0908A
-:0E0572007FEBE0FA907FEAE0FB907FEFE0FC89
-:0E0580003395E0FD8C057C00907FEEE0FE33AD
-:0E058E0095E0FFEC2EFCED3FFD907FE9E0FED6
-:05059C00BE0102800316
-:0305A1000205F957
-:0605A400BC0121BD001E98
-:0E05AA00EAC40354F8FCEB25E0FD2C2400FC11
-:0E05B800E43417FD907EC0E0FE8C828D83F04F
-:0205C600803182
-:0E05C800EAC40354F8FAEB25E0FB2AFA2400FB
-:0E05D600FBE43417FC907EC0E0FD8B828C832A
-:0E05E400F074012A2400FAE43417FB907EC163
-:0705F200E0FC8A828B83F01C
-:0305F90075380151
-:0105FC0022DC
-:0E05FD00C0E0C0F0C082C083C002C003C004D2
-:0E060B00C005C006C007C000C001C0D075D039
-:0D06190000C086758600E591C2E4F5919061
-:0D0626007FAA7401F0120564753700D086BC
-:0E063300D0D0D001D000D007D006D005D00422
-:0D064100D003D002D083D082D0F0D0E032C0
-:0E064E00907FEBE0FA907FEAE0FB907FEEE019
-:0E065C00FC3395E0FD907F96E0FE907F967453
-:0E066A00806506F0907F007401F0EAC403542E
-:0E067800F8FEEB25E0FB2EFE2400FBE4341719
-:0E068600FF8B828F83E0FB74012E2400FEE4C4
-:0E0694003417FF8E828F83E0FE907FE9E0FF37
-:0306A200BF810A0B
-:0A06A500907F00EBF0907F01EEF073
-:0806AF00907FE9E0FBBB821A19
-:0306B700BA010C79
-:0C06BA00907F00E4F0907F01E4F0800BE2
-:0B06C600907F00E4F0907F0174B5F01D
-:0806D100907FE9E0FBBB831BF5
-:0306D900BA010D56
-:0D06DC00907F007401F0907F01E4F0800B2E
-:0B06E900907F00E4F0907F017412F09D
-:0806F400907FE9E0FBBB841CD0
-:0306FC00BA010D33
-:0D06FF00907F007401F0907F01E4F0800C0A
-:0C070C00907F007480F0907F017401F079
-:05071800907FB5ECF03C
-:01071D0022B9
-:0C071E0075360D908800741DF0756B801E
-:0A072A00756C3C1210E2756B8075CF
-:090734006C0F1210E2756B807568
-:09073D006C061210E2756B807568
-:070746006C011210E27A00C1
-:03074D00BAFF00F0
-:02075000500A4D
-:0A075200C0021201DDD0020A80F19E
-:0A075C00756B80756C3C1210E2759D
-:080766006B80756C0F1210E2AC
-:01076E002268
-:0E076F00907FA1E4F0907FAF7401F0907F9234
-:0E077D007402F0758E3175892175880075C87B
-:0E078B0000758D4075984075C04075870075EB
-:0907990020007521007522007595
-:0507A200230075470073
-:0707A700C3E5479420501147
-:0D07AE00E5472400F582E43417F583E4F0FC
-:0407BB00054780E886
-:0907BF00E4F540F53FE4F53CF5DA
-:0707C8003BE4F53EF53D7531
-:0B07CF003200753700753900907F93F1
-:0E07DA00743CF0907F9C74FFF0907F967480CA
-:0E07E800F0907F947470F0907F9D748FF0906D
-:0E07F6007F97E4F0907F9574C2F0907F987426
-:0E08040028F0907F9E7428F0907FF0E4F09032
-:0E0812007FF1E4F0907FF2E4F0907FF3E4F0E9
-:0E082000907FF4E4F0907FF5E4F0907FF6E432
-:0E082E00F0907FF7E4F0907FF8E4F0907FF90F
-:0E083C007438F0907FFA74A0F0907FFB74A0E7
-:0E084A00F0907FFC74A0F0907FFD74A0F09001
-:0E0858007FFE74A0F0907FFF74A0F0907FE010
-:0E0866007403F0907FE17401F0907FDD7480E8
-:0B087400F012124312071E7A007B00F6
-:09087F00C3EA941EEB940050172B
-:0C088800908800E0F54790880BE0F547F1
-:09089400907F68F00ABA00010B24
-:02089D0080E0F9
-:0C089F001203E1907FD6E4F07A007B00A9
-:0D08AB008A048B05C3EA94E0EB942E501AEA
-:0E08B800C002C003C004C0051201DDD005D08F
-:0A08C60004D003D0020ABA00010BAF
-:0208D00080D9CD
-:0D08D200907FD67402F0907FD67406F090EF
-:0E08DF007FDE7405F0907FDF7405F0907FAC33
-:0E08ED00E4F0907FAD7405F075A88075F810EA
-:0D08FB00907FAE740BF0907FE27488F09057
-:0C0908007FAB7408F075E81175320175C2
-:0C0914003100753000C004C0051204F76B
-:0A092000D005D004753400753501D0
-:0D092A00907FAE7403F08C02BA00028003CF
-:03093700020A3F72
-:0C093A00853334907F9D748FF0907F9780
-:0E0946007408F0907F9D7488F0907F9AE0FA1C
-:0C09540074055AF533907F9D748FF0906D
-:0D0960007F977402F0907F9D7482F0E53364
-:0D096D0025E0FA907F9AE05405FB4AF5332F
-:02097A00600C0F
-:0C097C00907F96E0FA907F9674804AF01D
-:0B098800756E00756F00C004C0051202
-:0E0993001144D005D004901713E0FA74802AA6
-:0609A100FAE533B404295D
-:0309A700BAA000F3
-:0209AA005024D7
-:0D09AC00901713E004FB0B901713EBF09075
-:0E09B9001713E0FB901715F0C002C004C00534
-:0909C7001204F7D005D004D0029F
-:0509D000E533B402262E
-:0609D500C374049A5020D7
-:0D09DB00901713E0FA1A1A901713EAF09023
-:0D09E8001713E0FA901715F0C004C00512B7
-:0609F50004F7D005D00458
-:0509FB00E533B4081D06
-:040A0000E534701950
-:0A0A040074012535540FF5358535D2
-:0C0A0E0075757600C004C0051213FED000
-:030A1A0005D00400
-:050A1D00E533B4011DEA
-:040A2200E53470192E
-:0A0A2600E53524FF540FF535853542
-:0C0A300075757600C004C0051213FED0DE
-:030A3C0005D004DE
-:0E0A3F00C004C0051201DDD005D004907F96E2
-:0E0A4D00E0FA907F96747F5AF0907F977408BD
-:0A0A5B00F0C3EC9400ED9402400893
-:080A6500907F96E0FA20E608FC
-:080A6D00C3E49C74089D5013C2
-:0E0A7500907F96E0FA907F9674406502F07CC8
-:050A8300007D0080056C
-:050A88000CBC00010D93
-:050A8D00E538B4010E84
-:0D0A9200C004C0051204F7D005D00475386B
-:010A9F000056
-:070AA000E531700302092A91
-:0A0AA700907FC9E0FA7003020C2DE5
-:0E0AB100907F96E0FA907F9674806502F09038
-:090ABF007DC0E0FABA2C028003AC
-:030AC800020B36E8
-:050ACB007532007B0004
-:030AD000BB640004
-:020AD300501CB5
-:0E0AD500C002C003C004C0051201DDD005D070
-:0D0AE30004D003D00290880FE0F5470B808F
-:010AF000DF26
-:0D0AF100C002C004C00512071E1203E1126E
-:0C0AFE0004F7D005D004D002756E00751E
-:0D0B0A006F01C002C004C005121144D005E7
-:090B1700D004D00275704D757117
-:0B0B20000C757202C002C004C0051278
-:0B0B2B001175D005D004D002020C2D83
-:030B3600BA2A3B9D
-:0D0B3900907F987420F0C002C004C0051227
-:0E0B460001DDD005D004D002907F987428F015
-:020B54007B0024
-:030B5600BB0A00D7
-:050B59004003020C2D19
-:0E0B5E00C002C003C004C0051201DDD005D0E6
-:080B6C0004D003D0020B80E26B
-:030B7400BA2B1A7F
-:080B7700907FC9E0FBBB4012B6
-:0E0B7F00C002C004C005121205D005D004D07B
-:040B8D0002020C2D27
-:030B9100BA101F78
-:0E0B9400907F96E0FB907F9674806503F0C022
-:0E0BA20002C004C00512103DD005D004D002E0
-:030BB000020C2D07
-:030BB300BA111262
-:0E0BB600C002C004C00512106AD005D004D0E1
-:040BC40002020C2DF0
-:030BC800BA12124C
-:0E0BCB00C002C004C00512108FD005D004D0A7
-:040BD90002020C2DDB
-:030BDD00BA130B3D
-:0B0BE000907DC1E0FB908800F0804297
-:030BEB00BA141128
-:0E0BEE00C002C004C0051211DDD005D004D035
-:030BFC0002802E46
-:030BFF00BA151D07
-:0C0C0200907DC1E0F575907DC2E0F576B4
-:0E0C0E00C002C004C0051213FED005D004D0F1
-:030C1C0002800E45
-:030C1F00BA160BF7
-:0B0C2200C004C0051213A3D005D004CD
-:0B0C2D00907FC9E4F075310002092A35
-:010C38002299
-:070C3900535550454E4400E5
-:070C4000524553554D4500DC
-:060C470020566F6C200036
-:0D0C4D004441425553422076312E30300094
-:0E0C5A00C0E0C0F0C082C083C002C003C0046E
-:0E0C6800C005C006C007C000C001C0D075D0D6
-:0D0C760000C086758600E591C2E4F59190FE
-:0E0C83007FAB7401F0907FE8E0FA907FE9E02B
-:060C9100FBBB0002800322
-:030C9700020D3813
-:030C9A00BA801409
-:0E0C9D00907F007401F0907F01E4F0907FB52D
-:060CAB007402F0020ECD00
-:050CB100BA820280037D
-:030CB600020D1D0F
-:080CB900907FECE0FCBC01009F
-:020CC1004021D0
-:060CC300C374079C401BF6
-:0E0CC900EC24FF25E0FD24C6F582E4347FF51F
-:0D0CD70083E0FD530501907F00EDF0802BC0
-:030CE400BC8100D0
-:020CE7004021AA
-:060CE900C374879C401B50
-:0E0CEF00EC247F25E0FC24B6F582E4347FF58A
-:0D0CFD0083E0FC530401907F00ECF08005C3
-:050D0A00907F00E4F001
-:0E0D0F00907F01E4F0907FB57402F0020ECDEB
-:050D1D00BA8102800311
-:030D2200020EC5F9
-:0E0D2500907F00E4F0907F01E4F0907FB574C1
-:050D330002F0020ECDEC
-:030D3800BB012DCF
-:060D3B00BA0003020ECD18
-:030D4100BA0211E2
-:0D0D4400755900C002C003120EF0D003D09C
-:040D510002020ECDBF
-:050D5500BA2102800339
-:030D5A00020ECDB9
-:0B0D5D00753701907FC5E4F0020ECD59
-:030D6800BB031FAB
-:060D6B00BA0003020ECDE8
-:050D7100BA020280033C
-:030D7600020ECD9D
-:0D0D7900755901C002C003120EF0D003D066
-:040D860002020ECD8A
-:030D8A00BB065451
-:050D8D00BA80028003A2
-:030D9200020EC589
-:080D9500907FEBE0FCBC0115AE
-:0C0D9D007CFB7D0F8D067F00907FD4EE64
-:090DA900F0907FD5ECF0020ECDB4
-:0A0DB200907FEBE0FCBC020280031E
-:030DBC00020EC55F
-:0A0DBF00907FEAE0FCBC0002800314
-:030DC900020EC552
-:0C0DCC007C3B7D0F8D067F00907FD4EEF5
-:090DD800F0907FD5ECF0020ECD85
-:060DE100BB0703020EC572
-:030DE700BB081036
-:0D0DEA00AC48907F00ECF0907FB57401F0F4
-:030DF700020ECD1C
-:030DFA00BB093101
-:050DFD00BA00028003B2
-:030E0200020EC518
-:0E0E0500907FEAE0FCC374019C5003020EC50E
-:080E1300907FEAE0FCBC000A3C
-:0A0E1B00901721E4F0901722E4F094
-:090E2500907FEAE0F548020ECDD1
-:030E2E00BB0A27D5
-:050E3100BA81028003FC
-:030E3600020EC5E4
-:0E0E3900907FECE0FA2420FAE43417FC8A8261
-:0E0E47008C83E0FA907F00F0907FB57401F08C
-:030E5500020ECDBD
-:050E5800BB0B0280034A
-:030E5D00020EA9D9
-:0D0E6000901720E4F0907FECE0FABA011A40
-:080E6D00907FEDE0FABA0012DB
-:0E0E7500907FEAE0FA901721F0C0031204E229
-:040E8300D0038046D2
-:080E8700907FECE0FABA023E94
-:080E8F00907FEDE0FABA003695
-:0D0E9700C0031204EFD003907FEAE0FA9050
-:050EA4001722F080247C
-:050EA900BB12028017DE
-:050EAE00BB8102800D74
-:050EB300BB8302800872
-:050EB800BB8202800373
-:030EBD00BB8405EE
-:050EC00012064E80083F
-:080EC500907FB47403F0800675
-:060ECD00907FB47402F0F6
-:020ED300D086C7
-:0E0ED500D0D0D001D000D007D006D005D00478
-:0D0EE300D003D002D083D082D0F0D0E03216
-:0B0EF000907FECE0F55AC39401401D18
-:070EFB00C37407955A40166D
-:0D0F0200E55A24FF25E0FA24C6F582E43408
-:090F0F007FF583AA59EAF0802263
-:070F1800C3E55A9481401B60
-:070F1F00C37487955A4014CA
-:0D0F2600E55A24FF25E0FA24B6F582E434F4
-:070F33007FF583AA59EAF0E3
-:010F3A002294
-:0E0F3B000902BA000301004000090400000092
-:0E0F49000101000009240100013D0001010C1E
-:0E0F570024020110070002030000000D240612
-:0E0F650003010215000300030000092403022B
-:0E0F7300010100010009240304020300030031
-:0E0F8100092403050306000100090401000015
-:0E0F8F00010200000904010101010200000737
-:0E0F9D002401020101000B24020102021001D6
-:0E0FAB0080BB00090588050001010000072534
-:0E0FB900010000000009040200020000000018
-:0E0FC7000705820240000007050202400000FC
-:0E0FD50009040201030000000007058202402B
-:0E0FE30000000705020240000009058905A074
-:0A0FF1000101000000FFFFFFFF00F8
-:0E0FFB00120100010000004047059999000115
-:0E10090000000001000000000000000902BA13
-:0410170000030100D1
-:02101B007A0059
-:03101D00BA050011
-:02102000501767
-:08102200907FA5E0FB30E00522
-:05102A00900001800DA3
-:0A102F00C0021201DDD0020A80E4C5
-:0310390090000123
-:01103C002291
-:0E103D00907DC1E0F9A3E0FAA3E0FB7C007D0A
-:04104B007EEB6012C6
-:0E104F0089828A83E0A3A982AA838C828D8382
-:04105D00F00CDBEECA
-:08106100907DC3E0907FB9F01F
-:011069002264
-:0E106A00907DC1E0F9A3E0FAA3E0FB7CC47D19
-:041078007DEB60E5C7
-:0E107C008C828D83E00C89828A83F0A3A98286
-:04108A00AA83DBEE6C
-:01108E00223F
-:0E108F00907FA57480F00586907DC1E00586F7
-:0E109D00A3F012101B907FA60586A3A3E0F916
-:0510AB006016A305869C
-:0D10B000907FA60586E0A30586F0C0011222
-:0610BD00101BD001D9ED6B
-:0610C300907FA57440F0CF
-:0110C9002204
-:0810CA009088027401F07A0025
-:0310D200BAFF0062
-:0210D500500ABF
-:0A10D700C0021201DDD0020A80F110
-:0110E10022EC
-:0510E200E56BB4C0083D
-:0810E700908803E56CF080061F
-:0610EF00908802E56CF0A0
-:0410F5007A007B0002
-:0B10F900C3EA9432EB6480948050073F
-:051104000ABA00010B16
-:0211090080EE76
-:01110B0022C1
-:0A110C00908803E56DF005397A00C4
-:03111600BA2800F4
-:02111900500381
-:03111B000A80F84F
-:05111E00E539B41008E2
-:0811230090880274C0F0800EF8
-:05112B00E539B42009C4
-:091130009088027480F07539000A
-:021139007A003A
-:03113B00BA2800CF
-:02113E0050035C
-:031140000A80F82A
-:011143002289
-:04114400E56F6002F1
-:0211480080071E
-:07114A007A007539008005F1
-:051151007A4075391021
-:09115600E56E2AFAE56E2539F573
-:0A115F003990880274802AF07A00AB
-:08116900C3EA648094A850035E
-:031171000A80F5FC
-:011174002258
-:06117500AA70AB71AC7220
-:0C117B008A828B838CF01214EEFD601849
-:0D1187008D6DC002C003C00412110CD00415
-:09119400D003D0020ABA00010BDD
-:02119D0080DCF4
-:01119F00222D
-:0D11A000E573C4540FFA53020FC374099A8B
-:0211AD005006EA
-:0611AF0074372AFB8004E6
-:0411B50074302AFB6D
-:0C11B9008B6DC00312110CD003AA7353FD
-:0811C500020FC374099A5006E1
-:0611CD0074372AFB8004C8
-:0411D30074302AFB4F
-:0511D7008B6D12110CEC
-:0111DC0022F0
-:0711DD00907DC3E0FA600FF2
-:0C11E400907DC1E0F56E907DC2E0F56FDB
-:0311F00012114495
-:0C11F300907DFFE4F07570C475717D758F
-:0511FF007201121175E0
-:0112040022C7
-:021205007A0469
-:03120700BA4000EA
-:02120A0050365C
-:0E120C00EA24C0F582E4347DF583E0FB7C002B
-:03121A00BC08000D
-:02121D0050205F
-:06121F008B05ED30E70B2A
-:0B122500907F967442F074C3F08008C4
-:08123000907F96E4F07481F058
-:07123800EB25E0FB0C80DB5D
-:03123F000A80C55D
-:011242002289
-:041243007A007BEFC3
-:03124700BA1000DA
-:02124A00502032
-:0E124C0074112BFB2400FCE43418FD8C828D01
-:0E125A0083E4F0EA2400F582E43419F583E41D
-:04126800F00A80DB2D
-:01126C00225F
-:0E126D0074F82400F58274033484F583E4F0F1
-:0E127B0074F92400F58274033484F583E4F0E2
-:0E12890074FA2400F58274033484F583E4F0D3
-:0E12970074FB2400F58274033484F583E4F0C4
-:0E12A50074FF2400F58274033484F583E4F0B2
-:0112B3002218
-:0E12B4001203CB12126D7AC07B877C0174018D
-:0E12C2002AFDE43BFE8C078A828B838CF0743D
-:0E12D000011214BF2DFAE43EFB8F048D828EB6
-:0E12DE00838FF074061214BF74012AFDE43BE6
-:0E12EC00FE8C078A828B838CF0E41214BF7490
-:0E12FA00012DFAE43EFB8F048D828E838FF06F
-:0E130800740B1214BF74012AFDE43BFE8C0727
-:0E1316008A828B838CF074081214BF74012D30
-:0E132400FAE43EFB8F048D828E838FF07401FD
-:0E1332001214BF2AFDE43BFE8C078A828B83D7
-:0E1340008CF0E41214BF74012DFAE43EFB8F12
-:0E134E00048D828E838FF074031214BF7D0015
-:03135C00BD0600CB
-:02135F0050122A
-:0B1361008A828B838CF00ABA00010B1B
-:07136C00E41214BF0D80E93B
-:0D1373008A828B838CF0E5741214BF74F92C
-:0E1380002400F58274033484F583740FF07436
-:0E138E00FE2400F58274033484F5837401F0AC
-:06139C001203E11204F748
-:0113A2002228
-:0D13A300907DC1E0FA2400FBE43419FC90B9
-:0E13B0007DC2E0FD8B828C83F075F011EAA403
-:0313BE00FA7B00B7
-:0313C100BB10005E
-:0213C4005024B3
-:0E13C600EA2400FCE43418FDEB2CFCE43DFDB1
-:0E13D40074042B24C0F582E4347DF583E0FE22
-:0813E2008C828D83F00B80D793
-:0E13EA00EA2400FAE43418FB74102AF582E4B9
-:0513F8003BF583E4F069
-:0113FD0022CD
-:0413FE00E57660022E
-:02140200801652
-:0C140400740F5575FA8A752400F582E417
-:0A1410003419F583E0F5741212B4EC
-:0A141A001210CA756E00756F001203
-:0614240011447570B9755A
-:06142A007114757202123C
-:0B1430001175E576B402047401800120
-:01143B00E4CC
-:03143C00FA700F34
-:0C143F0074012575F573C0021211A0D0D5
-:03144B0002800A12
-:0A144E00857573C0021211A0D002D0
-:0C145800756E00756F01C002121144D0C7
-:0414640002EA701A0E
-:0D14680075F011E575A4FA2400FAE43418BB
-:09147500FB8A708B717572011283
-:04147E00117580362E
-:021482007A00EE
-:03148400BA10009B
-:02148700502FE4
-:0D148900EA2400F582E43419F583E0FBE568
-:0414960075B5031B0A
-:0E149A0075F011EAA4FB2400FBE43418FC8B6F
-:0914A800708C71757201C0021212
-:0414B1001175D002DF
-:0314B5000A80CCDE
-:0114B8002211
-:0614B90050726F67200075
-:0E14BF00C8C0E0C8C0E0E5F0600B14600F1478
-:0714CD00601114601280158C
-:0714D400D0E0A882F6800EB3
-:0514DB00D0E0F08009E3
-:0414E000D0E08005D3
-:0514E400D0E0A882F237
-:0414E900C8D0E0C8BF
-:0114ED0022DC
-:0E14EE00C8C0E0E5F0600D14600F14600F142C
-:0614FC00601074FF800F78
-:05150200A882E6800A4A
-:03150700E080077A
-:04150A00E4938003E3
-:03150E00A882E2CE
-:04151100F8D0E0C866
-:0115150022B3
-:00000001FF
-
- * Copyright (C) 1999 BayCom GmbH
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that redistributions of source
- * code retain the above copyright notice and this comment without
- * modification.
diff --git a/fs/compat_ioctl.c b/fs/compat_ioctl.c
index 4c6285f..e2f57a0 100644
--- a/fs/compat_ioctl.c
+++ b/fs/compat_ioctl.c
@@ -844,6 +844,9 @@
COMPATIBLE_IOCTL(TIOCCBRK)
COMPATIBLE_IOCTL(TIOCGSID)
COMPATIBLE_IOCTL(TIOCGICOUNT)
+COMPATIBLE_IOCTL(TIOCGPKT)
+COMPATIBLE_IOCTL(TIOCGPTLCK)
+COMPATIBLE_IOCTL(TIOCGEXCL)
/* Little t */
COMPATIBLE_IOCTL(TIOCGETD)
COMPATIBLE_IOCTL(TIOCSETD)
diff --git a/fs/debugfs/inode.c b/fs/debugfs/inode.c
index b607d92..153bb1e 100644
--- a/fs/debugfs/inode.c
+++ b/fs/debugfs/inode.c
@@ -59,7 +59,6 @@
case S_IFDIR:
inode->i_op = &simple_dir_inode_operations;
inode->i_fop = &simple_dir_operations;
- inode->i_private = NULL;
/* directory inodes start off with i_nlink == 2
* (for "." entry) */
diff --git a/fs/devpts/inode.c b/fs/devpts/inode.c
index 14afbab..472e6be 100644
--- a/fs/devpts/inode.c
+++ b/fs/devpts/inode.c
@@ -545,37 +545,38 @@
mutex_unlock(&allocated_ptys_lock);
}
-int devpts_pty_new(struct inode *ptmx_inode, struct tty_struct *tty)
+/**
+ * devpts_pty_new -- create a new inode in /dev/pts/
+ * @ptmx_inode: inode of the master
+ * @device: major+minor of the node to be created
+ * @index: used as a name of the node
+ * @priv: what's given back by devpts_get_priv
+ *
+ * The created inode is returned. Remove it from /dev/pts/ by devpts_pty_kill.
+ */
+struct inode *devpts_pty_new(struct inode *ptmx_inode, dev_t device, int index,
+ void *priv)
{
- /* tty layer puts index from devpts_new_index() in here */
- int number = tty->index;
- struct tty_driver *driver = tty->driver;
- dev_t device = MKDEV(driver->major, driver->minor_start+number);
struct dentry *dentry;
struct super_block *sb = pts_sb_from_inode(ptmx_inode);
- struct inode *inode = new_inode(sb);
+ struct inode *inode;
struct dentry *root = sb->s_root;
struct pts_fs_info *fsi = DEVPTS_SB(sb);
struct pts_mount_opts *opts = &fsi->mount_opts;
- int ret = 0;
char s[12];
- /* We're supposed to be given the slave end of a pty */
- BUG_ON(driver->type != TTY_DRIVER_TYPE_PTY);
- BUG_ON(driver->subtype != PTY_TYPE_SLAVE);
-
+ inode = new_inode(sb);
if (!inode)
- return -ENOMEM;
+ return ERR_PTR(-ENOMEM);
- inode->i_ino = number + 3;
+ inode->i_ino = index + 3;
inode->i_uid = opts->setuid ? opts->uid : current_fsuid();
inode->i_gid = opts->setgid ? opts->gid : current_fsgid();
inode->i_mtime = inode->i_atime = inode->i_ctime = CURRENT_TIME;
init_special_inode(inode, S_IFCHR|opts->mode, device);
- inode->i_private = tty;
- tty->driver_data = inode;
+ inode->i_private = priv;
- sprintf(s, "%d", number);
+ sprintf(s, "%d", index);
mutex_lock(&root->d_inode->i_mutex);
@@ -585,18 +586,24 @@
fsnotify_create(root->d_inode, dentry);
} else {
iput(inode);
- ret = -ENOMEM;
+ inode = ERR_PTR(-ENOMEM);
}
mutex_unlock(&root->d_inode->i_mutex);
- return ret;
+ return inode;
}
-struct tty_struct *devpts_get_tty(struct inode *pts_inode, int number)
+/**
+ * devpts_get_priv -- get private data for a slave
+ * @pts_inode: inode of the slave
+ *
+ * Returns whatever was passed as priv in devpts_pty_new for a given inode.
+ */
+void *devpts_get_priv(struct inode *pts_inode)
{
struct dentry *dentry;
- struct tty_struct *tty;
+ void *priv = NULL;
BUG_ON(pts_inode->i_rdev == MKDEV(TTYAUX_MAJOR, PTMX_MINOR));
@@ -605,18 +612,22 @@
if (!dentry)
return NULL;
- tty = NULL;
if (pts_inode->i_sb->s_magic == DEVPTS_SUPER_MAGIC)
- tty = (struct tty_struct *)pts_inode->i_private;
+ priv = pts_inode->i_private;
dput(dentry);
- return tty;
+ return priv;
}
-void devpts_pty_kill(struct tty_struct *tty)
+/**
+ * devpts_pty_kill -- remove inode form /dev/pts/
+ * @inode: inode of the slave to be removed
+ *
+ * This is an inverse operation of devpts_pty_new.
+ */
+void devpts_pty_kill(struct inode *inode)
{
- struct inode *inode = tty->driver_data;
struct super_block *sb = pts_sb_from_inode(inode);
struct dentry *root = sb->s_root;
struct dentry *dentry;
diff --git a/fs/sysfs/file.c b/fs/sysfs/file.c
index 00012e3..602f56d 100644
--- a/fs/sysfs/file.c
+++ b/fs/sysfs/file.c
@@ -485,8 +485,8 @@
.poll = sysfs_poll,
};
-int sysfs_attr_ns(struct kobject *kobj, const struct attribute *attr,
- const void **pns)
+static int sysfs_attr_ns(struct kobject *kobj, const struct attribute *attr,
+ const void **pns)
{
struct sysfs_dirent *dir_sd = kobj->sd;
const struct sysfs_ops *ops;
diff --git a/include/acpi/acconfig.h b/include/acpi/acconfig.h
index 03f1485..0943457 100644
--- a/include/acpi/acconfig.h
+++ b/include/acpi/acconfig.h
@@ -241,6 +241,7 @@
*****************************************************************************/
#define ACPI_DEBUGGER_MAX_ARGS 8 /* Must be max method args + 1 */
+#define ACPI_DB_LINE_BUFFER_SIZE 512
#define ACPI_DEBUGGER_COMMAND_PROMPT '-'
#define ACPI_DEBUGGER_EXECUTE_PROMPT '%'
diff --git a/include/acpi/acexcep.h b/include/acpi/acexcep.h
index 1950344..6c3890e 100644
--- a/include/acpi/acexcep.h
+++ b/include/acpi/acexcep.h
@@ -122,7 +122,7 @@
#define AE_CODE_TBL_MAX 0x0005
/*
- * AML exceptions. These are caused by problems with
+ * AML exceptions. These are caused by problems with
* the actual AML byte stream
*/
#define AE_AML_BAD_OPCODE (acpi_status) (0x0001 | AE_CODE_AML)
diff --git a/include/acpi/acnames.h b/include/acpi/acnames.h
index 745dd24e..7665df6 100644
--- a/include/acpi/acnames.h
+++ b/include/acpi/acnames.h
@@ -50,6 +50,7 @@
#define METHOD_NAME__HID "_HID"
#define METHOD_NAME__CID "_CID"
#define METHOD_NAME__UID "_UID"
+#define METHOD_NAME__SUB "_SUB"
#define METHOD_NAME__ADR "_ADR"
#define METHOD_NAME__INI "_INI"
#define METHOD_NAME__STA "_STA"
diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h
index 0daa0fb..7ced5dc 100644
--- a/include/acpi/acpi_bus.h
+++ b/include/acpi/acpi_bus.h
@@ -144,12 +144,11 @@
u32 bus_address:1;
u32 removable:1;
u32 ejectable:1;
- u32 lockable:1;
u32 suprise_removal_ok:1;
u32 power_manageable:1;
u32 performance_manageable:1;
u32 eject_pending:1;
- u32 reserved:23;
+ u32 reserved:24;
};
/* File System */
@@ -180,6 +179,7 @@
acpi_device_name device_name; /* Driver-determined */
acpi_device_class device_class; /* " */
union acpi_object *str_obj; /* unicode string for _STR method */
+ unsigned long sun; /* _SUN */
};
#define acpi_device_bid(d) ((d)->pnp.bus_id)
@@ -201,6 +201,7 @@
struct acpi_device_power_state {
struct {
u8 valid:1;
+ u8 os_accessible:1;
u8 explicit_set:1; /* _PSx present? */
u8 reserved:6;
} flags;
@@ -339,6 +340,7 @@
unsigned long long *sta);
int acpi_bus_get_status(struct acpi_device *device);
int acpi_bus_set_power(acpi_handle handle, int state);
+int acpi_device_set_power(struct acpi_device *device, int state);
int acpi_bus_update_power(acpi_handle handle, int *state_p);
bool acpi_bus_power_manageable(acpi_handle handle);
bool acpi_bus_can_wakeup(acpi_handle handle);
@@ -410,27 +412,70 @@
int acpi_is_root_bridge(acpi_handle);
acpi_handle acpi_get_pci_rootbridge_handle(unsigned int, unsigned int);
struct acpi_pci_root *acpi_pci_find_root(acpi_handle handle);
-#define DEVICE_ACPI_HANDLE(dev) ((acpi_handle)((dev)->archdata.acpi_handle))
+#define DEVICE_ACPI_HANDLE(dev) ((acpi_handle)ACPI_HANDLE(dev))
int acpi_enable_wakeup_device_power(struct acpi_device *dev, int state);
int acpi_disable_wakeup_device_power(struct acpi_device *dev);
#ifdef CONFIG_PM
+acpi_status acpi_add_pm_notifier(struct acpi_device *adev,
+ acpi_notify_handler handler, void *context);
+acpi_status acpi_remove_pm_notifier(struct acpi_device *adev,
+ acpi_notify_handler handler);
+int acpi_device_power_state(struct device *dev, struct acpi_device *adev,
+ u32 target_state, int d_max_in, int *d_min_p);
int acpi_pm_device_sleep_state(struct device *, int *, int);
#else
-static inline int acpi_pm_device_sleep_state(struct device *d, int *p, int m)
+static inline acpi_status acpi_add_pm_notifier(struct acpi_device *adev,
+ acpi_notify_handler handler,
+ void *context)
+{
+ return AE_SUPPORT;
+}
+static inline acpi_status acpi_remove_pm_notifier(struct acpi_device *adev,
+ acpi_notify_handler handler)
+{
+ return AE_SUPPORT;
+}
+static inline int __acpi_device_power_state(int m, int *p)
{
if (p)
*p = ACPI_STATE_D0;
return (m >= ACPI_STATE_D0 && m <= ACPI_STATE_D3) ? m : ACPI_STATE_D0;
}
+static inline int acpi_device_power_state(struct device *dev,
+ struct acpi_device *adev,
+ u32 target_state, int d_max_in,
+ int *d_min_p)
+{
+ return __acpi_device_power_state(d_max_in, d_min_p);
+}
+static inline int acpi_pm_device_sleep_state(struct device *d, int *p, int m)
+{
+ return __acpi_device_power_state(m, p);
+}
+#endif
+
+#ifdef CONFIG_PM_RUNTIME
+int __acpi_device_run_wake(struct acpi_device *, bool);
+int acpi_pm_device_run_wake(struct device *, bool);
+#else
+static inline int __acpi_device_run_wake(struct acpi_device *adev, bool en)
+{
+ return -ENODEV;
+}
+static inline int acpi_pm_device_run_wake(struct device *dev, bool enable)
+{
+ return -ENODEV;
+}
#endif
#ifdef CONFIG_PM_SLEEP
-int acpi_pm_device_run_wake(struct device *, bool);
+int __acpi_device_sleep_wake(struct acpi_device *, u32, bool);
int acpi_pm_device_sleep_wake(struct device *, bool);
#else
-static inline int acpi_pm_device_run_wake(struct device *dev, bool enable)
+static inline int __acpi_device_sleep_wake(struct acpi_device *adev,
+ u32 target_state, bool enable)
{
return -ENODEV;
}
@@ -440,6 +485,27 @@
}
#endif
+#ifdef CONFIG_ACPI_SLEEP
+u32 acpi_target_system_state(void);
+#else
+static inline u32 acpi_target_system_state(void) { return ACPI_STATE_S0; }
+#endif
+
+static inline bool acpi_device_power_manageable(struct acpi_device *adev)
+{
+ return adev->flags.power_manageable;
+}
+
+static inline bool acpi_device_can_wakeup(struct acpi_device *adev)
+{
+ return adev->wakeup.flags.valid;
+}
+
+static inline bool acpi_device_can_poweroff(struct acpi_device *adev)
+{
+ return adev->power.states[ACPI_STATE_D3_COLD].flags.os_accessible;
+}
+
#else /* CONFIG_ACPI */
static inline int register_acpi_bus_type(void *bus) { return 0; }
diff --git a/include/acpi/acpiosxf.h b/include/acpi/acpiosxf.h
index 1222ba9..4315274 100644
--- a/include/acpi/acpiosxf.h
+++ b/include/acpi/acpiosxf.h
@@ -1,7 +1,6 @@
-
/******************************************************************************
*
- * Name: acpiosxf.h - All interfaces to the OS Services Layer (OSL). These
+ * Name: acpiosxf.h - All interfaces to the OS Services Layer (OSL). These
* interfaces must be implemented by OSL to interface the
* ACPI components to the host operating system.
*
diff --git a/include/acpi/acpixf.h b/include/acpi/acpixf.h
index 8b891db..3d88395 100644
--- a/include/acpi/acpixf.h
+++ b/include/acpi/acpixf.h
@@ -1,4 +1,3 @@
-
/******************************************************************************
*
* Name: acpixf.h - External interfaces to the ACPI subsystem
@@ -47,7 +46,7 @@
/* Current ACPICA subsystem version in YYYYMMDD format */
-#define ACPI_CA_VERSION 0x20120913
+#define ACPI_CA_VERSION 0x20121018
#include <acpi/acconfig.h>
#include <acpi/actypes.h>
@@ -178,8 +177,7 @@
acpi_status
acpi_get_table_header(acpi_string signature,
- u32 instance,
- struct acpi_table_header *out_table_header);
+ u32 instance, struct acpi_table_header *out_table_header);
acpi_status
acpi_get_table_with_size(acpi_string signature,
@@ -190,8 +188,7 @@
u32 instance, struct acpi_table_header **out_table);
acpi_status
-acpi_get_table_by_index(u32 table_index,
- struct acpi_table_header **out_table);
+acpi_get_table_by_index(u32 table_index, struct acpi_table_header **out_table);
acpi_status
acpi_install_table_handler(acpi_tbl_handler handler, void *context);
@@ -274,7 +271,7 @@
ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status
acpi_install_global_event_handler
- (ACPI_GBL_EVENT_HANDLER handler, void *context))
+ (acpi_gbl_event_handler handler, void *context))
ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status
acpi_install_fixed_event_handler(u32
@@ -300,10 +297,9 @@
u32 gpe_number,
acpi_gpe_handler
address))
-acpi_status
-acpi_install_notify_handler(acpi_handle device,
- u32 handler_type,
- acpi_notify_handler handler, void *context);
+acpi_status acpi_install_notify_handler(acpi_handle device, u32 handler_type,
+ acpi_notify_handler handler,
+ void *context);
acpi_status
acpi_remove_notify_handler(acpi_handle device,
diff --git a/include/acpi/actbl3.h b/include/acpi/actbl3.h
index 8c61b5f..6585141 100644
--- a/include/acpi/actbl3.h
+++ b/include/acpi/actbl3.h
@@ -277,10 +277,10 @@
******************************************************************************/
#define ACPI_MPST_CHANNEL_INFO \
- u16 reserved1; \
u8 channel_id; \
- u8 reserved2; \
- u16 power_node_count;
+ u8 reserved1[3]; \
+ u16 power_node_count; \
+ u16 reserved2;
/* Main table */
@@ -304,9 +304,8 @@
u32 length;
u64 range_address;
u64 range_length;
- u8 num_power_states;
- u8 num_physical_components;
- u16 reserved2;
+ u32 num_power_states;
+ u32 num_physical_components;
};
/* Values for Flags field above */
@@ -332,10 +331,11 @@
struct acpi_mpst_data_hdr {
u16 characteristics_count;
+ u16 reserved;
};
struct acpi_mpst_power_data {
- u8 revision;
+ u8 structure_id;
u8 flags;
u16 reserved1;
u32 average_power;
@@ -356,10 +356,10 @@
u32 signature;
u16 pcc_command;
u16 pcc_status;
- u16 command_register;
- u16 status_register;
- u16 power_state_id;
- u16 power_node_id;
+ u32 command_register;
+ u32 status_register;
+ u32 power_state_id;
+ u32 power_node_id;
u64 energy_consumed;
u64 average_power;
};
diff --git a/include/acpi/actypes.h b/include/acpi/actypes.h
index a85bae9..4f43f1f 100644
--- a/include/acpi/actypes.h
+++ b/include/acpi/actypes.h
@@ -453,10 +453,14 @@
#define ACPI_PHYSADDR_TO_PTR(i) ACPI_TO_POINTER(i)
#define ACPI_PTR_TO_PHYSADDR(i) ACPI_TO_INTEGER(i)
+/* Optimizations for 4-character (32-bit) acpi_name manipulation */
+
#ifndef ACPI_MISALIGNMENT_NOT_SUPPORTED
#define ACPI_COMPARE_NAME(a,b) (*ACPI_CAST_PTR (u32, (a)) == *ACPI_CAST_PTR (u32, (b)))
+#define ACPI_MOVE_NAME(dest,src) (*ACPI_CAST_PTR (u32, (dest)) = *ACPI_CAST_PTR (u32, (src)))
#else
#define ACPI_COMPARE_NAME(a,b) (!ACPI_STRNCMP (ACPI_CAST_PTR (char, (a)), ACPI_CAST_PTR (char, (b)), ACPI_NAME_SIZE))
+#define ACPI_MOVE_NAME(dest,src) (ACPI_STRNCPY (ACPI_CAST_PTR (char, (dest)), ACPI_CAST_PTR (char, (src)), ACPI_NAME_SIZE))
#endif
/*******************************************************************************
@@ -796,11 +800,11 @@
/* Sleep function dispatch */
-typedef acpi_status(*ACPI_SLEEP_FUNCTION) (u8 sleep_state);
+typedef acpi_status(*acpi_sleep_function) (u8 sleep_state);
struct acpi_sleep_functions {
- ACPI_SLEEP_FUNCTION legacy_function;
- ACPI_SLEEP_FUNCTION extended_function;
+ acpi_sleep_function legacy_function;
+ acpi_sleep_function extended_function;
};
/*
@@ -922,7 +926,8 @@
/*
* Types specific to the OS service interfaces
*/
-typedef u32(ACPI_SYSTEM_XFACE * acpi_osd_handler) (void *context);
+typedef u32
+ (ACPI_SYSTEM_XFACE * acpi_osd_handler) (void *context);
typedef void
(ACPI_SYSTEM_XFACE * acpi_osd_exec_callback) (void *context);
@@ -931,14 +936,15 @@
* Various handlers and callback procedures
*/
typedef
-void (*ACPI_GBL_EVENT_HANDLER) (u32 event_type,
+void (*acpi_gbl_event_handler) (u32 event_type,
acpi_handle device,
u32 event_number, void *context);
#define ACPI_EVENT_TYPE_GPE 0
#define ACPI_EVENT_TYPE_FIXED 1
-typedef u32(*acpi_event_handler) (void *context);
+typedef
+u32(*acpi_event_handler) (void *context);
typedef
u32 (*acpi_gpe_handler) (acpi_handle gpe_device, u32 gpe_number, void *context);
@@ -1018,17 +1024,17 @@
#define ACPI_UUID_LENGTH 16
-/* Structures used for device/processor HID, UID, CID */
+/* Structures used for device/processor HID, UID, CID, and SUB */
-struct acpica_device_id {
+struct acpi_pnp_device_id {
u32 length; /* Length of string + null */
char *string;
};
-struct acpica_device_id_list {
+struct acpi_pnp_device_id_list {
u32 count; /* Number of IDs in Ids array */
u32 list_size; /* Size of list, including ID strings */
- struct acpica_device_id ids[1]; /* ID array */
+ struct acpi_pnp_device_id ids[1]; /* ID array */
};
/*
@@ -1046,9 +1052,10 @@
u8 lowest_dstates[5]; /* _sx_w values: 0xFF indicates not valid */
u32 current_status; /* _STA value */
u64 address; /* _ADR value */
- struct acpica_device_id hardware_id; /* _HID value */
- struct acpica_device_id unique_id; /* _UID value */
- struct acpica_device_id_list compatible_id_list; /* _CID list <must be last> */
+ struct acpi_pnp_device_id hardware_id; /* _HID value */
+ struct acpi_pnp_device_id unique_id; /* _UID value */
+ struct acpi_pnp_device_id subsystem_id; /* _SUB value */
+ struct acpi_pnp_device_id_list compatible_id_list; /* _CID list <must be last> */
};
/* Values for Flags field above (acpi_get_object_info) */
@@ -1061,11 +1068,12 @@
#define ACPI_VALID_ADR 0x02
#define ACPI_VALID_HID 0x04
#define ACPI_VALID_UID 0x08
-#define ACPI_VALID_CID 0x10
-#define ACPI_VALID_SXDS 0x20
-#define ACPI_VALID_SXWS 0x40
+#define ACPI_VALID_SUB 0x10
+#define ACPI_VALID_CID 0x20
+#define ACPI_VALID_SXDS 0x40
+#define ACPI_VALID_SXWS 0x80
-/* Flags for _STA method */
+/* Flags for _STA return value (current_status above) */
#define ACPI_STA_DEVICE_PRESENT 0x01
#define ACPI_STA_DEVICE_ENABLED 0x02
diff --git a/include/asm-generic/gpio.h b/include/asm-generic/gpio.h
index 9fd3093..20ca766 100644
--- a/include/asm-generic/gpio.h
+++ b/include/asm-generic/gpio.h
@@ -57,6 +57,8 @@
* enabling module power and clock; may sleep
* @free: optional hook for chip-specific deactivation, such as
* disabling module power and clock; may sleep
+ * @get_direction: returns direction for signal "offset", 0=out, 1=in,
+ * (same as GPIOF_DIR_XXX), or negative error
* @direction_input: configures signal "offset" as input, or returns error
* @get: returns value for signal "offset"; for output signals this
* returns either the value actually sensed, or zero
@@ -101,7 +103,8 @@
unsigned offset);
void (*free)(struct gpio_chip *chip,
unsigned offset);
-
+ int (*get_direction)(struct gpio_chip *chip,
+ unsigned offset);
int (*direction_input)(struct gpio_chip *chip,
unsigned offset);
int (*get)(struct gpio_chip *chip,
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index 90be989..c33fa3c 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -25,7 +25,9 @@
#ifndef _LINUX_ACPI_H
#define _LINUX_ACPI_H
+#include <linux/errno.h>
#include <linux/ioport.h> /* for struct resource */
+#include <linux/device.h>
#ifdef CONFIG_ACPI
@@ -250,6 +252,26 @@
#define PXM_INVAL (-1)
+bool acpi_dev_resource_memory(struct acpi_resource *ares, struct resource *res);
+bool acpi_dev_resource_io(struct acpi_resource *ares, struct resource *res);
+bool acpi_dev_resource_address_space(struct acpi_resource *ares,
+ struct resource *res);
+bool acpi_dev_resource_ext_address_space(struct acpi_resource *ares,
+ struct resource *res);
+unsigned long acpi_dev_irq_flags(u8 triggering, u8 polarity, u8 shareable);
+bool acpi_dev_resource_interrupt(struct acpi_resource *ares, int index,
+ struct resource *res);
+
+struct resource_list_entry {
+ struct list_head node;
+ struct resource res;
+};
+
+void acpi_dev_free_resource_list(struct list_head *list);
+int acpi_dev_get_resources(struct acpi_device *adev, struct list_head *list,
+ int (*preproc)(struct acpi_resource *, void *),
+ void *preproc_data);
+
int acpi_check_resource_conflict(const struct resource *res);
int acpi_check_region(resource_size_t start, resource_size_t n,
@@ -257,10 +279,14 @@
int acpi_resources_are_enforced(void);
-#ifdef CONFIG_PM_SLEEP
+#ifdef CONFIG_HIBERNATION
void __init acpi_no_s4_hw_signature(void);
+#endif
+
+#ifdef CONFIG_PM_SLEEP
void __init acpi_old_suspend_ordering(void);
void __init acpi_nvs_nosave(void);
+void __init acpi_nvs_nosave_s3(void);
#endif /* CONFIG_PM_SLEEP */
struct acpi_osc_context {
@@ -364,6 +390,17 @@
extern int acpi_nvs_for_each_region(int (*func)(__u64, __u64, void *),
void *data);
+const struct acpi_device_id *acpi_match_device(const struct acpi_device_id *ids,
+ const struct device *dev);
+
+static inline bool acpi_driver_match_device(struct device *dev,
+ const struct device_driver *drv)
+{
+ return !!acpi_match_device(drv->acpi_match_table, dev);
+}
+
+#define ACPI_PTR(_ptr) (_ptr)
+
#else /* !CONFIG_ACPI */
#define acpi_disabled 1
@@ -418,6 +455,22 @@
return 0;
}
+struct acpi_device_id;
+
+static inline const struct acpi_device_id *acpi_match_device(
+ const struct acpi_device_id *ids, const struct device *dev)
+{
+ return NULL;
+}
+
+static inline bool acpi_driver_match_device(struct device *dev,
+ const struct device_driver *drv)
+{
+ return false;
+}
+
+#define ACPI_PTR(_ptr) (NULL)
+
#endif /* !CONFIG_ACPI */
#ifdef CONFIG_ACPI
@@ -430,4 +483,84 @@
#define acpi_os_set_prepare_sleep(func, pm1a_ctrl, pm1b_ctrl) do { } while (0)
#endif
+#if defined(CONFIG_ACPI) && defined(CONFIG_PM_RUNTIME)
+int acpi_dev_runtime_suspend(struct device *dev);
+int acpi_dev_runtime_resume(struct device *dev);
+int acpi_subsys_runtime_suspend(struct device *dev);
+int acpi_subsys_runtime_resume(struct device *dev);
+#else
+static inline int acpi_dev_runtime_suspend(struct device *dev) { return 0; }
+static inline int acpi_dev_runtime_resume(struct device *dev) { return 0; }
+static inline int acpi_subsys_runtime_suspend(struct device *dev) { return 0; }
+static inline int acpi_subsys_runtime_resume(struct device *dev) { return 0; }
+#endif
+
+#ifdef CONFIG_ACPI_SLEEP
+int acpi_dev_suspend_late(struct device *dev);
+int acpi_dev_resume_early(struct device *dev);
+int acpi_subsys_prepare(struct device *dev);
+int acpi_subsys_suspend_late(struct device *dev);
+int acpi_subsys_resume_early(struct device *dev);
+#else
+static inline int acpi_dev_suspend_late(struct device *dev) { return 0; }
+static inline int acpi_dev_resume_early(struct device *dev) { return 0; }
+static inline int acpi_subsys_prepare(struct device *dev) { return 0; }
+static inline int acpi_subsys_suspend_late(struct device *dev) { return 0; }
+static inline int acpi_subsys_resume_early(struct device *dev) { return 0; }
+#endif
+
+#if defined(CONFIG_ACPI) && defined(CONFIG_PM)
+int acpi_dev_pm_attach(struct device *dev, bool power_on);
+void acpi_dev_pm_detach(struct device *dev, bool power_off);
+#else
+static inline int acpi_dev_pm_attach(struct device *dev, bool power_on)
+{
+ return -ENODEV;
+}
+static inline void acpi_dev_pm_detach(struct device *dev, bool power_off) {}
+#endif
+
+#ifdef CONFIG_ACPI
+__printf(3, 4)
+void acpi_handle_printk(const char *level, acpi_handle handle,
+ const char *fmt, ...);
+#else /* !CONFIG_ACPI */
+static inline __printf(3, 4) void
+acpi_handle_printk(const char *level, void *handle, const char *fmt, ...) {}
+#endif /* !CONFIG_ACPI */
+
+/*
+ * acpi_handle_<level>: Print message with ACPI prefix and object path
+ *
+ * These interfaces acquire the global namespace mutex to obtain an object
+ * path. In interrupt context, it shows the object path as <n/a>.
+ */
+#define acpi_handle_emerg(handle, fmt, ...) \
+ acpi_handle_printk(KERN_EMERG, handle, fmt, ##__VA_ARGS__)
+#define acpi_handle_alert(handle, fmt, ...) \
+ acpi_handle_printk(KERN_ALERT, handle, fmt, ##__VA_ARGS__)
+#define acpi_handle_crit(handle, fmt, ...) \
+ acpi_handle_printk(KERN_CRIT, handle, fmt, ##__VA_ARGS__)
+#define acpi_handle_err(handle, fmt, ...) \
+ acpi_handle_printk(KERN_ERR, handle, fmt, ##__VA_ARGS__)
+#define acpi_handle_warn(handle, fmt, ...) \
+ acpi_handle_printk(KERN_WARNING, handle, fmt, ##__VA_ARGS__)
+#define acpi_handle_notice(handle, fmt, ...) \
+ acpi_handle_printk(KERN_NOTICE, handle, fmt, ##__VA_ARGS__)
+#define acpi_handle_info(handle, fmt, ...) \
+ acpi_handle_printk(KERN_INFO, handle, fmt, ##__VA_ARGS__)
+
+/* REVISIT: Support CONFIG_DYNAMIC_DEBUG when necessary */
+#if defined(DEBUG) || defined(CONFIG_DYNAMIC_DEBUG)
+#define acpi_handle_debug(handle, fmt, ...) \
+ acpi_handle_printk(KERN_DEBUG, handle, fmt, ##__VA_ARGS__)
+#else
+#define acpi_handle_debug(handle, fmt, ...) \
+({ \
+ if (0) \
+ acpi_handle_printk(KERN_DEBUG, handle, fmt, ##__VA_ARGS__); \
+ 0; \
+})
+#endif
+
#endif /*_LINUX_ACPI_H*/
diff --git a/include/linux/acpi_gpio.h b/include/linux/acpi_gpio.h
new file mode 100644
index 0000000..91615a38
--- /dev/null
+++ b/include/linux/acpi_gpio.h
@@ -0,0 +1,19 @@
+#ifndef _LINUX_ACPI_GPIO_H_
+#define _LINUX_ACPI_GPIO_H_
+
+#include <linux/errno.h>
+
+#ifdef CONFIG_GPIO_ACPI
+
+int acpi_get_gpio(char *path, int pin);
+
+#else /* CONFIG_GPIO_ACPI */
+
+static inline int acpi_get_gpio(char *path, int pin)
+{
+ return -ENODEV;
+}
+
+#endif /* CONFIG_GPIO_ACPI */
+
+#endif /* _LINUX_ACPI_GPIO_H_ */
diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h
index b60f6ba..a55b88e 100644
--- a/include/linux/cpufreq.h
+++ b/include/linux/cpufreq.h
@@ -11,6 +11,7 @@
#ifndef _LINUX_CPUFREQ_H
#define _LINUX_CPUFREQ_H
+#include <asm/cputime.h>
#include <linux/mutex.h>
#include <linux/notifier.h>
#include <linux/threads.h>
@@ -22,6 +23,8 @@
#include <asm/div64.h>
#define CPUFREQ_NAME_LEN 16
+/* Print length for names. Extra 1 space for accomodating '\n' in prints */
+#define CPUFREQ_NAME_PLEN (CPUFREQ_NAME_LEN + 1)
/*********************************************************************
@@ -404,6 +407,4 @@
unsigned int cpu);
void cpufreq_frequency_table_put_attr(unsigned int cpu);
-
-
#endif /* _LINUX_CPUFREQ_H */
diff --git a/include/linux/cpuidle.h b/include/linux/cpuidle.h
index 279b1ea..3711b34 100644
--- a/include/linux/cpuidle.h
+++ b/include/linux/cpuidle.h
@@ -82,13 +82,6 @@
st_usage->driver_data = data;
}
-struct cpuidle_state_kobj {
- struct cpuidle_state *state;
- struct cpuidle_state_usage *state_usage;
- struct completion kobj_unregister;
- struct kobject kobj;
-};
-
struct cpuidle_device {
unsigned int registered:1;
unsigned int enabled:1;
@@ -98,7 +91,7 @@
int state_count;
struct cpuidle_state_usage states_usage[CPUIDLE_STATE_MAX];
struct cpuidle_state_kobj *kobjs[CPUIDLE_STATE_MAX];
-
+ struct cpuidle_driver_kobj *kobj_driver;
struct list_head device_list;
struct kobject kobj;
struct completion kobj_unregister;
@@ -131,6 +124,7 @@
struct cpuidle_driver {
const char *name;
struct module *owner;
+ int refcnt;
unsigned int power_specified:1;
/* set to 1 to use the core cpuidle time keeping (for all states). */
@@ -163,6 +157,10 @@
struct cpuidle_driver *drv, int index));
extern int cpuidle_play_dead(void);
+extern struct cpuidle_driver *cpuidle_get_cpu_driver(struct cpuidle_device *dev);
+extern int cpuidle_register_cpu_driver(struct cpuidle_driver *drv, int cpu);
+extern void cpuidle_unregister_cpu_driver(struct cpuidle_driver *drv, int cpu);
+
#else
static inline void disable_cpuidle(void) { }
static inline int cpuidle_idle_call(void) { return -ENODEV; }
@@ -189,7 +187,6 @@
struct cpuidle_driver *drv, int index))
{ return -ENODEV; }
static inline int cpuidle_play_dead(void) {return -ENODEV; }
-
#endif
#ifdef CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED
diff --git a/include/linux/devfreq.h b/include/linux/devfreq.h
index 281c72a..e83ef39 100644
--- a/include/linux/devfreq.h
+++ b/include/linux/devfreq.h
@@ -25,12 +25,12 @@
* struct devfreq_dev_status - Data given from devfreq user device to
* governors. Represents the performance
* statistics.
- * @total_time The total time represented by this instance of
+ * @total_time: The total time represented by this instance of
* devfreq_dev_status
- * @busy_time The time that the device was working among the
+ * @busy_time: The time that the device was working among the
* total_time.
- * @current_frequency The operating frequency.
- * @private_data An entry not specified by the devfreq framework.
+ * @current_frequency: The operating frequency.
+ * @private_data: An entry not specified by the devfreq framework.
* A device and a specific governor may have their
* own protocol with private_data. However, because
* this is governor-specific, a governor using this
@@ -54,23 +54,27 @@
/**
* struct devfreq_dev_profile - Devfreq's user device profile
- * @initial_freq The operating frequency when devfreq_add_device() is
+ * @initial_freq: The operating frequency when devfreq_add_device() is
* called.
- * @polling_ms The polling interval in ms. 0 disables polling.
- * @target The device should set its operating frequency at
+ * @polling_ms: The polling interval in ms. 0 disables polling.
+ * @target: The device should set its operating frequency at
* freq or lowest-upper-than-freq value. If freq is
* higher than any operable frequency, set maximum.
* Before returning, target function should set
* freq at the current frequency.
* The "flags" parameter's possible values are
* explained above with "DEVFREQ_FLAG_*" macros.
- * @get_dev_status The device should provide the current performance
+ * @get_dev_status: The device should provide the current performance
* status to devfreq, which is used by governors.
- * @exit An optional callback that is called when devfreq
+ * @get_cur_freq: The device should provide the current frequency
+ * at which it is operating.
+ * @exit: An optional callback that is called when devfreq
* is removing the devfreq object due to error or
* from devfreq_remove_device() call. If the user
* has registered devfreq->nb at a notifier-head,
* this is the time to unregister it.
+ * @freq_table: Optional list of frequencies to support statistics.
+ * @max_state: The size of freq_table.
*/
struct devfreq_dev_profile {
unsigned long initial_freq;
@@ -79,63 +83,63 @@
int (*target)(struct device *dev, unsigned long *freq, u32 flags);
int (*get_dev_status)(struct device *dev,
struct devfreq_dev_status *stat);
+ int (*get_cur_freq)(struct device *dev, unsigned long *freq);
void (*exit)(struct device *dev);
+
+ unsigned int *freq_table;
+ unsigned int max_state;
};
/**
* struct devfreq_governor - Devfreq policy governor
- * @name Governor's name
- * @get_target_freq Returns desired operating frequency for the device.
+ * @node: list node - contains registered devfreq governors
+ * @name: Governor's name
+ * @get_target_freq: Returns desired operating frequency for the device.
* Basically, get_target_freq will run
* devfreq_dev_profile.get_dev_status() to get the
* status of the device (load = busy_time / total_time).
* If no_central_polling is set, this callback is called
* only with update_devfreq() notified by OPP.
- * @init Called when the devfreq is being attached to a device
- * @exit Called when the devfreq is being removed from a
- * device. Governor should stop any internal routines
- * before return because related data may be
- * freed after exit().
- * @no_central_polling Do not use devfreq's central polling mechanism.
- * When this is set, devfreq will not call
- * get_target_freq with devfreq_monitor(). However,
- * devfreq will call get_target_freq with
- * devfreq_update() notified by OPP framework.
+ * @event_handler: Callback for devfreq core framework to notify events
+ * to governors. Events include per device governor
+ * init and exit, opp changes out of devfreq, suspend
+ * and resume of per device devfreq during device idle.
*
* Note that the callbacks are called with devfreq->lock locked by devfreq.
*/
struct devfreq_governor {
+ struct list_head node;
+
const char name[DEVFREQ_NAME_LEN];
int (*get_target_freq)(struct devfreq *this, unsigned long *freq);
- int (*init)(struct devfreq *this);
- void (*exit)(struct devfreq *this);
- const bool no_central_polling;
+ int (*event_handler)(struct devfreq *devfreq,
+ unsigned int event, void *data);
};
/**
* struct devfreq - Device devfreq structure
- * @node list node - contains the devices with devfreq that have been
+ * @node: list node - contains the devices with devfreq that have been
* registered.
- * @lock a mutex to protect accessing devfreq.
- * @dev device registered by devfreq class. dev.parent is the device
+ * @lock: a mutex to protect accessing devfreq.
+ * @dev: device registered by devfreq class. dev.parent is the device
* using devfreq.
- * @profile device-specific devfreq profile
- * @governor method how to choose frequency based on the usage.
- * @nb notifier block used to notify devfreq object that it should
+ * @profile: device-specific devfreq profile
+ * @governor: method how to choose frequency based on the usage.
+ * @governor_name: devfreq governor name for use with this devfreq
+ * @nb: notifier block used to notify devfreq object that it should
* reevaluate operable frequencies. Devfreq users may use
* devfreq.nb to the corresponding register notifier call chain.
- * @polling_jiffies interval in jiffies.
- * @previous_freq previously configured frequency value.
- * @next_polling the number of remaining jiffies to poll with
- * "devfreq_monitor" executions to reevaluate
- * frequency/voltage of the device. Set by
- * profile's polling_ms interval.
- * @data Private data of the governor. The devfreq framework does not
+ * @work: delayed work for load monitoring.
+ * @previous_freq: previously configured frequency value.
+ * @data: Private data of the governor. The devfreq framework does not
* touch this.
- * @being_removed a flag to mark that this object is being removed in
- * order to prevent trying to remove the object multiple times.
- * @min_freq Limit minimum frequency requested by user (0: none)
- * @max_freq Limit maximum frequency requested by user (0: none)
+ * @min_freq: Limit minimum frequency requested by user (0: none)
+ * @max_freq: Limit maximum frequency requested by user (0: none)
+ * @stop_polling: devfreq polling status of a device.
+ * @total_trans: Number of devfreq transitions
+ * @trans_table: Statistics of devfreq transitions
+ * @time_in_state: Statistics of devfreq states
+ * @last_stat_updated: The last time stat updated
*
* This structure stores the devfreq information for a give device.
*
@@ -152,26 +156,33 @@
struct device dev;
struct devfreq_dev_profile *profile;
const struct devfreq_governor *governor;
+ char governor_name[DEVFREQ_NAME_LEN];
struct notifier_block nb;
+ struct delayed_work work;
- unsigned long polling_jiffies;
unsigned long previous_freq;
- unsigned int next_polling;
void *data; /* private data for governors */
- bool being_removed;
-
unsigned long min_freq;
unsigned long max_freq;
+ bool stop_polling;
+
+ /* information for device freqeuncy transition */
+ unsigned int total_trans;
+ unsigned int *trans_table;
+ unsigned long *time_in_state;
+ unsigned long last_stat_updated;
};
#if defined(CONFIG_PM_DEVFREQ)
extern struct devfreq *devfreq_add_device(struct device *dev,
struct devfreq_dev_profile *profile,
- const struct devfreq_governor *governor,
+ const char *governor_name,
void *data);
extern int devfreq_remove_device(struct devfreq *devfreq);
+extern int devfreq_suspend_device(struct devfreq *devfreq);
+extern int devfreq_resume_device(struct devfreq *devfreq);
/* Helper functions for devfreq user device driver with OPP. */
extern struct opp *devfreq_recommended_opp(struct device *dev,
@@ -181,23 +192,13 @@
extern int devfreq_unregister_opp_notifier(struct device *dev,
struct devfreq *devfreq);
-#ifdef CONFIG_DEVFREQ_GOV_POWERSAVE
-extern const struct devfreq_governor devfreq_powersave;
-#endif
-#ifdef CONFIG_DEVFREQ_GOV_PERFORMANCE
-extern const struct devfreq_governor devfreq_performance;
-#endif
-#ifdef CONFIG_DEVFREQ_GOV_USERSPACE
-extern const struct devfreq_governor devfreq_userspace;
-#endif
-#ifdef CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND
-extern const struct devfreq_governor devfreq_simple_ondemand;
+#if IS_ENABLED(CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND)
/**
* struct devfreq_simple_ondemand_data - void *data fed to struct devfreq
* and devfreq_add_device
- * @ upthreshold If the load is over this value, the frequency jumps.
+ * @upthreshold: If the load is over this value, the frequency jumps.
* Specify 0 to use the default. Valid value = 0 to 100.
- * @ downdifferential If the load is under upthreshold - downdifferential,
+ * @downdifferential: If the load is under upthreshold - downdifferential,
* the governor may consider slowing the frequency down.
* Specify 0 to use the default. Valid value = 0 to 100.
* downdifferential < upthreshold must hold.
@@ -214,7 +215,7 @@
#else /* !CONFIG_PM_DEVFREQ */
static struct devfreq *devfreq_add_device(struct device *dev,
struct devfreq_dev_profile *profile,
- struct devfreq_governor *governor,
+ const char *governor_name,
void *data)
{
return NULL;
@@ -225,6 +226,16 @@
return 0;
}
+static int devfreq_suspend_device(struct devfreq *devfreq)
+{
+ return 0;
+}
+
+static int devfreq_resume_device(struct devfreq *devfreq)
+{
+ return 0;
+}
+
static struct opp *devfreq_recommended_opp(struct device *dev,
unsigned long *freq, u32 flags)
{
@@ -243,11 +254,6 @@
return -EINVAL;
}
-#define devfreq_powersave NULL
-#define devfreq_performance NULL
-#define devfreq_userspace NULL
-#define devfreq_simple_ondemand NULL
-
#endif /* CONFIG_PM_DEVFREQ */
#endif /* __LINUX_DEVFREQ_H__ */
diff --git a/include/linux/device.h b/include/linux/device.h
index 86ef6ab..05292e4 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -190,6 +190,7 @@
* @mod_name: Used for built-in modules.
* @suppress_bind_attrs: Disables bind/unbind via sysfs.
* @of_match_table: The open firmware table.
+ * @acpi_match_table: The ACPI match table.
* @probe: Called to query the existence of a specific device,
* whether this driver can work with it, and bind the driver
* to a specific device.
@@ -223,6 +224,7 @@
bool suppress_bind_attrs; /* disables bind/unbind via sysfs */
const struct of_device_id *of_match_table;
+ const struct acpi_device_id *acpi_match_table;
int (*probe) (struct device *dev);
int (*remove) (struct device *dev);
@@ -576,6 +578,12 @@
unsigned long segment_boundary_mask;
};
+struct acpi_dev_node {
+#ifdef CONFIG_ACPI
+ void *handle;
+#endif
+};
+
/**
* struct device - The basic device structure
* @parent: The device's "parent" device, the device to which it is attached.
@@ -616,6 +624,7 @@
* @dma_mem: Internal for coherent mem override.
* @archdata: For arch-specific additions.
* @of_node: Associated device tree node.
+ * @acpi_node: Associated ACPI device node.
* @devt: For creating the sysfs "dev".
* @id: device instance
* @devres_lock: Spinlock to protect the resource of the device.
@@ -680,6 +689,7 @@
struct dev_archdata archdata;
struct device_node *of_node; /* associated device tree node */
+ struct acpi_dev_node acpi_node; /* associated ACPI device node */
dev_t devt; /* dev_t, creates the sysfs "dev" */
u32 id; /* device instance */
@@ -700,6 +710,14 @@
return container_of(kobj, struct device, kobj);
}
+#ifdef CONFIG_ACPI
+#define ACPI_HANDLE(dev) ((dev)->acpi_node.handle)
+#define ACPI_HANDLE_SET(dev, _handle_) (dev)->acpi_node.handle = (_handle_)
+#else
+#define ACPI_HANDLE(dev) (NULL)
+#define ACPI_HANDLE_SET(dev, _handle_) do { } while (0)
+#endif
+
/* Get the wakeup routines, which depend on struct device */
#include <linux/pm_wakeup.h>
diff --git a/include/linux/devpts_fs.h b/include/linux/devpts_fs.h
index 5ce0e5f..251a209 100644
--- a/include/linux/devpts_fs.h
+++ b/include/linux/devpts_fs.h
@@ -20,28 +20,28 @@
int devpts_new_index(struct inode *ptmx_inode);
void devpts_kill_index(struct inode *ptmx_inode, int idx);
/* mknod in devpts */
-int devpts_pty_new(struct inode *ptmx_inode, struct tty_struct *tty);
-/* get tty structure */
-struct tty_struct *devpts_get_tty(struct inode *pts_inode, int number);
+struct inode *devpts_pty_new(struct inode *ptmx_inode, dev_t device, int index,
+ void *priv);
+/* get private structure */
+void *devpts_get_priv(struct inode *pts_inode);
/* unlink */
-void devpts_pty_kill(struct tty_struct *tty);
+void devpts_pty_kill(struct inode *inode);
#else
/* Dummy stubs in the no-pty case */
static inline int devpts_new_index(struct inode *ptmx_inode) { return -EINVAL; }
static inline void devpts_kill_index(struct inode *ptmx_inode, int idx) { }
-static inline int devpts_pty_new(struct inode *ptmx_inode,
- struct tty_struct *tty)
+static inline struct inode *devpts_pty_new(struct inode *ptmx_inode,
+ dev_t device, int index, void *priv)
{
- return -EINVAL;
+ return ERR_PTR(-EINVAL);
}
-static inline struct tty_struct *devpts_get_tty(struct inode *pts_inode,
- int number)
+static inline void *devpts_get_priv(struct inode *pts_inode)
{
return NULL;
}
-static inline void devpts_pty_kill(struct tty_struct *tty) { }
+static inline void devpts_pty_kill(struct inode *inode) { }
#endif
diff --git a/include/linux/freezer.h b/include/linux/freezer.h
index d09af4b..b90091a 100644
--- a/include/linux/freezer.h
+++ b/include/linux/freezer.h
@@ -177,6 +177,7 @@
static inline void thaw_processes(void) {}
static inline void thaw_kernel_threads(void) {}
+static inline bool try_to_freeze_nowarn(void) { return false; }
static inline bool try_to_freeze(void) { return false; }
static inline void freezer_do_not_count(void) {}
diff --git a/include/linux/i2c.h b/include/linux/i2c.h
index 800de22..d0c4db7 100644
--- a/include/linux/i2c.h
+++ b/include/linux/i2c.h
@@ -259,6 +259,7 @@
* @platform_data: stored in i2c_client.dev.platform_data
* @archdata: copied into i2c_client.dev.archdata
* @of_node: pointer to OpenFirmware device node
+ * @acpi_node: ACPI device node
* @irq: stored in i2c_client.irq
*
* I2C doesn't actually support hardware probing, although controllers and
@@ -279,6 +280,7 @@
void *platform_data;
struct dev_archdata *archdata;
struct device_node *of_node;
+ struct acpi_dev_node acpi_node;
int irq;
};
@@ -501,4 +503,11 @@
i2c_del_driver)
#endif /* I2C */
+
+#if IS_ENABLED(CONFIG_ACPI_I2C)
+extern void acpi_i2c_register_devices(struct i2c_adapter *adap);
+#else
+static inline void acpi_i2c_register_devices(struct i2c_adapter *adap) {}
+#endif
+
#endif /* _LINUX_I2C_H */
diff --git a/include/linux/i2c/pcf857x.h b/include/linux/i2c/pcf857x.h
index 781e6bd..0767a2a 100644
--- a/include/linux/i2c/pcf857x.h
+++ b/include/linux/i2c/pcf857x.h
@@ -10,7 +10,6 @@
* @setup: optional callback issued once the GPIOs are valid
* @teardown: optional callback issued before the GPIOs are invalidated
* @context: optional parameter passed to setup() and teardown()
- * @irq: optional interrupt number
*
* In addition to the I2C_BOARD_INFO() state appropriate to each chip,
* the i2c_board_info used with the pcf875x driver must provide its
@@ -40,8 +39,6 @@
int gpio, unsigned ngpio,
void *context);
void *context;
-
- int irq;
};
#endif /* __LINUX_PCF857X_H */
diff --git a/include/linux/iio/buffer.h b/include/linux/iio/buffer.h
index c629b3a..f3eea18 100644
--- a/include/linux/iio/buffer.h
+++ b/include/linux/iio/buffer.h
@@ -66,7 +66,8 @@
* @stufftoread: [INTERN] flag to indicate new data.
* @demux_list: [INTERN] list of operations required to demux the scan.
* @demux_bounce: [INTERN] buffer for doing gather from incoming scan.
- **/
+ * @buffer_list: [INTERN] entry in the devices list of current buffers.
+ */
struct iio_buffer {
int length;
int bytes_per_datum;
@@ -81,9 +82,22 @@
const struct attribute_group *attrs;
struct list_head demux_list;
unsigned char *demux_bounce;
+ struct list_head buffer_list;
};
/**
+ * iio_update_buffers() - add or remove buffer from active list
+ * @indio_dev: device to add buffer to
+ * @insert_buffer: buffer to insert
+ * @remove_buffer: buffer_to_remove
+ *
+ * Note this will tear down the all buffering and build it up again
+ */
+int iio_update_buffers(struct iio_dev *indio_dev,
+ struct iio_buffer *insert_buffer,
+ struct iio_buffer *remove_buffer);
+
+/**
* iio_buffer_init() - Initialize the buffer structure
* @buffer: buffer to be initialized
**/
@@ -115,11 +129,11 @@
struct iio_buffer *buffer, int bit);
/**
- * iio_push_to_buffer() - push to a registered buffer.
- * @buffer: IIO buffer structure for device
- * @data: the data to push to the buffer
+ * iio_push_to_buffers() - push to a registered buffer.
+ * @indio_dev: iio_dev structure for device.
+ * @data: Full scan.
*/
-int iio_push_to_buffer(struct iio_buffer *buffer, unsigned char *data);
+int iio_push_to_buffers(struct iio_dev *indio_dev, unsigned char *data);
int iio_update_demux(struct iio_dev *indio_dev);
@@ -181,7 +195,7 @@
#else /* CONFIG_IIO_BUFFER */
static inline int iio_buffer_register(struct iio_dev *indio_dev,
- struct iio_chan_spec *channels,
+ const struct iio_chan_spec *channels,
int num_channels)
{
return 0;
diff --git a/include/linux/iio/consumer.h b/include/linux/iio/consumer.h
index e875bcf..16c35ac 100644
--- a/include/linux/iio/consumer.h
+++ b/include/linux/iio/consumer.h
@@ -9,6 +9,8 @@
*/
#ifndef _IIO_INKERN_CONSUMER_H_
#define _IIO_INKERN_CONSUMER_H_
+
+#include <linux/types.h>
#include <linux/iio/types.h>
struct iio_dev;
@@ -18,10 +20,12 @@
* struct iio_channel - everything needed for a consumer to use a channel
* @indio_dev: Device on which the channel exists.
* @channel: Full description of the channel.
+ * @data: Data about the channel used by consumer.
*/
struct iio_channel {
struct iio_dev *indio_dev;
const struct iio_chan_spec *channel;
+ void *data;
};
/**
@@ -59,6 +63,52 @@
*/
void iio_channel_release_all(struct iio_channel *chan);
+struct iio_cb_buffer;
+/**
+ * iio_channel_get_all_cb() - register callback for triggered capture
+ * @name: Name of client device.
+ * @cb: Callback function.
+ * @private: Private data passed to callback.
+ *
+ * NB right now we have no ability to mux data from multiple devices.
+ * So if the channels requested come from different devices this will
+ * fail.
+ */
+struct iio_cb_buffer *iio_channel_get_all_cb(const char *name,
+ int (*cb)(u8 *data,
+ void *private),
+ void *private);
+/**
+ * iio_channel_release_all_cb() - release and unregister the callback.
+ * @cb_buffer: The callback buffer that was allocated.
+ */
+void iio_channel_release_all_cb(struct iio_cb_buffer *cb_buffer);
+
+/**
+ * iio_channel_start_all_cb() - start the flow of data through callback.
+ * @cb_buff: The callback buffer we are starting.
+ */
+int iio_channel_start_all_cb(struct iio_cb_buffer *cb_buff);
+
+/**
+ * iio_channel_stop_all_cb() - stop the flow of data through the callback.
+ * @cb_buff: The callback buffer we are stopping.
+ */
+void iio_channel_stop_all_cb(struct iio_cb_buffer *cb_buff);
+
+/**
+ * iio_channel_cb_get_channels() - get access to the underlying channels.
+ * @cb_buff: The callback buffer from whom we want the channel
+ * information.
+ *
+ * This function allows one to obtain information about the channels.
+ * Whilst this may allow direct reading if all buffers are disabled, the
+ * primary aim is to allow drivers that are consuming a channel to query
+ * things like scaling of the channel.
+ */
+struct iio_channel
+*iio_channel_cb_get_channels(const struct iio_cb_buffer *cb_buffer);
+
/**
* iio_read_channel_raw() - read from a given channel
* @chan: The channel being queried.
diff --git a/include/linux/iio/iio.h b/include/linux/iio/iio.h
index 7806c24..da8c776 100644
--- a/include/linux/iio/iio.h
+++ b/include/linux/iio/iio.h
@@ -410,6 +410,7 @@
* and owner
* @event_interface: [INTERN] event chrdevs associated with interrupt lines
* @buffer: [DRIVER] any buffer present
+ * @buffer_list: [INTERN] list of all buffers currently attached
* @scan_bytes: [INTERN] num bytes captured to be fed to buffer demux
* @mlock: [INTERN] lock used to prevent simultaneous device state
* changes
@@ -448,6 +449,7 @@
struct iio_event_interface *event_interface;
struct iio_buffer *buffer;
+ struct list_head buffer_list;
int scan_bytes;
struct mutex mlock;
@@ -618,6 +620,9 @@
};
#endif
+int iio_str_to_fixpoint(const char *str, int fract_mult, int *integer,
+ int *fract);
+
/**
* IIO_DEGREE_TO_RAD() - Convert degree to rad
* @deg: A value in degree
diff --git a/include/linux/iio/imu/adis.h b/include/linux/iio/imu/adis.h
new file mode 100644
index 0000000..ff781dc
--- /dev/null
+++ b/include/linux/iio/imu/adis.h
@@ -0,0 +1,280 @@
+/*
+ * Common library for ADIS16XXX devices
+ *
+ * Copyright 2012 Analog Devices Inc.
+ * Author: Lars-Peter Clausen <lars@metafoo.de>
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __IIO_ADIS_H__
+#define __IIO_ADIS_H__
+
+#include <linux/spi/spi.h>
+#include <linux/interrupt.h>
+#include <linux/iio/types.h>
+
+#define ADIS_WRITE_REG(reg) ((0x80 | (reg)))
+#define ADIS_READ_REG(reg) ((reg) & 0x7f)
+
+#define ADIS_PAGE_SIZE 0x80
+#define ADIS_REG_PAGE_ID 0x00
+
+struct adis;
+
+/**
+ * struct adis_data - ADIS chip variant specific data
+ * @read_delay: SPI delay for read operations in us
+ * @write_delay: SPI delay for write operations in us
+ * @glob_cmd_reg: Register address of the GLOB_CMD register
+ * @msc_ctrl_reg: Register address of the MSC_CTRL register
+ * @diag_stat_reg: Register address of the DIAG_STAT register
+ * @status_error_msgs: Array of error messgaes
+ * @status_error_mask:
+ */
+struct adis_data {
+ unsigned int read_delay;
+ unsigned int write_delay;
+
+ unsigned int glob_cmd_reg;
+ unsigned int msc_ctrl_reg;
+ unsigned int diag_stat_reg;
+
+ unsigned int self_test_mask;
+ unsigned int startup_delay;
+
+ const char * const *status_error_msgs;
+ unsigned int status_error_mask;
+
+ int (*enable_irq)(struct adis *adis, bool enable);
+
+ bool has_paging;
+};
+
+struct adis {
+ struct spi_device *spi;
+ struct iio_trigger *trig;
+
+ const struct adis_data *data;
+
+ struct mutex txrx_lock;
+ struct spi_message msg;
+ struct spi_transfer *xfer;
+ unsigned int current_page;
+ void *buffer;
+
+ uint8_t tx[10] ____cacheline_aligned;
+ uint8_t rx[4];
+};
+
+int adis_init(struct adis *adis, struct iio_dev *indio_dev,
+ struct spi_device *spi, const struct adis_data *data);
+int adis_reset(struct adis *adis);
+
+int adis_write_reg(struct adis *adis, unsigned int reg,
+ unsigned int val, unsigned int size);
+int adis_read_reg(struct adis *adis, unsigned int reg,
+ unsigned int *val, unsigned int size);
+
+/**
+ * adis_write_reg_8() - Write single byte to a register
+ * @adis: The adis device
+ * @reg: The address of the register to be written
+ * @value: The value to write
+ */
+static inline int adis_write_reg_8(struct adis *adis, unsigned int reg,
+ uint8_t val)
+{
+ return adis_write_reg(adis, reg, val, 1);
+}
+
+/**
+ * adis_write_reg_16() - Write 2 bytes to a pair of registers
+ * @adis: The adis device
+ * @reg: The address of the lower of the two registers
+ * @value: Value to be written
+ */
+static inline int adis_write_reg_16(struct adis *adis, unsigned int reg,
+ uint16_t val)
+{
+ return adis_write_reg(adis, reg, val, 2);
+}
+
+/**
+ * adis_write_reg_32() - write 4 bytes to four registers
+ * @adis: The adis device
+ * @reg: The address of the lower of the four register
+ * @value: Value to be written
+ */
+static inline int adis_write_reg_32(struct adis *adis, unsigned int reg,
+ uint32_t val)
+{
+ return adis_write_reg(adis, reg, val, 4);
+}
+
+/**
+ * adis_read_reg_16() - read 2 bytes from a 16-bit register
+ * @adis: The adis device
+ * @reg: The address of the lower of the two registers
+ * @val: The value read back from the device
+ */
+static inline int adis_read_reg_16(struct adis *adis, unsigned int reg,
+ uint16_t *val)
+{
+ unsigned int tmp;
+ int ret;
+
+ ret = adis_read_reg(adis, reg, &tmp, 2);
+ *val = tmp;
+
+ return ret;
+}
+
+/**
+ * adis_read_reg_32() - read 4 bytes from a 32-bit register
+ * @adis: The adis device
+ * @reg: The address of the lower of the two registers
+ * @val: The value read back from the device
+ */
+static inline int adis_read_reg_32(struct adis *adis, unsigned int reg,
+ uint32_t *val)
+{
+ unsigned int tmp;
+ int ret;
+
+ ret = adis_read_reg(adis, reg, &tmp, 4);
+ *val = tmp;
+
+ return ret;
+}
+
+int adis_enable_irq(struct adis *adis, bool enable);
+int adis_check_status(struct adis *adis);
+
+int adis_initial_startup(struct adis *adis);
+
+int adis_single_conversion(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan, unsigned int error_mask,
+ int *val);
+
+#define ADIS_VOLTAGE_CHAN(addr, si, chan, name, bits) { \
+ .type = IIO_VOLTAGE, \
+ .indexed = 1, \
+ .channel = (chan), \
+ .extend_name = name, \
+ .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | \
+ IIO_CHAN_INFO_SCALE_SEPARATE_BIT, \
+ .address = (addr), \
+ .scan_index = (si), \
+ .scan_type = { \
+ .sign = 'u', \
+ .realbits = (bits), \
+ .storagebits = 16, \
+ .endianness = IIO_BE, \
+ }, \
+}
+
+#define ADIS_SUPPLY_CHAN(addr, si, bits) \
+ ADIS_VOLTAGE_CHAN(addr, si, 0, "supply", bits)
+
+#define ADIS_AUX_ADC_CHAN(addr, si, bits) \
+ ADIS_VOLTAGE_CHAN(addr, si, 1, NULL, bits)
+
+#define ADIS_TEMP_CHAN(addr, si, bits) { \
+ .type = IIO_TEMP, \
+ .indexed = 1, \
+ .channel = 0, \
+ .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | \
+ IIO_CHAN_INFO_SCALE_SEPARATE_BIT | \
+ IIO_CHAN_INFO_OFFSET_SEPARATE_BIT, \
+ .address = (addr), \
+ .scan_index = (si), \
+ .scan_type = { \
+ .sign = 'u', \
+ .realbits = (bits), \
+ .storagebits = 16, \
+ .endianness = IIO_BE, \
+ }, \
+}
+
+#define ADIS_MOD_CHAN(_type, mod, addr, si, info, bits) { \
+ .type = (_type), \
+ .modified = 1, \
+ .channel2 = IIO_MOD_ ## mod, \
+ .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | \
+ IIO_CHAN_INFO_SCALE_SHARED_BIT | \
+ info, \
+ .address = (addr), \
+ .scan_index = (si), \
+ .scan_type = { \
+ .sign = 's', \
+ .realbits = (bits), \
+ .storagebits = 16, \
+ .endianness = IIO_BE, \
+ }, \
+}
+
+#define ADIS_ACCEL_CHAN(mod, addr, si, info, bits) \
+ ADIS_MOD_CHAN(IIO_ACCEL, mod, addr, si, info, bits)
+
+#define ADIS_GYRO_CHAN(mod, addr, si, info, bits) \
+ ADIS_MOD_CHAN(IIO_ANGL_VEL, mod, addr, si, info, bits)
+
+#define ADIS_INCLI_CHAN(mod, addr, si, info, bits) \
+ ADIS_MOD_CHAN(IIO_INCLI, mod, addr, si, info, bits)
+
+#define ADIS_ROT_CHAN(mod, addr, si, info, bits) \
+ ADIS_MOD_CHAN(IIO_ROT, mod, addr, si, info, bits)
+
+#ifdef CONFIG_IIO_ADIS_LIB_BUFFER
+
+int adis_setup_buffer_and_trigger(struct adis *adis,
+ struct iio_dev *indio_dev, irqreturn_t (*trigger_handler)(int, void *));
+void adis_cleanup_buffer_and_trigger(struct adis *adis,
+ struct iio_dev *indio_dev);
+
+int adis_probe_trigger(struct adis *adis, struct iio_dev *indio_dev);
+void adis_remove_trigger(struct adis *adis);
+
+int adis_update_scan_mode(struct iio_dev *indio_dev,
+ const unsigned long *scan_mask);
+
+#else /* CONFIG_IIO_BUFFER */
+
+static inline int adis_setup_buffer_and_trigger(struct adis *adis,
+ struct iio_dev *indio_dev, irqreturn_t (*trigger_handler)(int, void *))
+{
+ return 0;
+}
+
+static inline void adis_cleanup_buffer_and_trigger(struct adis *adis,
+ struct iio_dev *indio_dev)
+{
+}
+
+static inline int adis_probe_trigger(struct adis *adis,
+ struct iio_dev *indio_dev)
+{
+ return 0;
+}
+
+static inline void adis_remove_trigger(struct adis *adis)
+{
+}
+
+#define adis_update_scan_mode NULL
+
+#endif /* CONFIG_IIO_BUFFER */
+
+#ifdef CONFIG_DEBUG_FS
+
+int adis_debugfs_reg_access(struct iio_dev *indio_dev,
+ unsigned int reg, unsigned int writeval, unsigned int *readval);
+
+#else
+
+#define adis_debugfs_reg_access NULL
+
+#endif
+
+#endif
diff --git a/include/linux/iio/machine.h b/include/linux/iio/machine.h
index 809a3f0..1601a2a 100644
--- a/include/linux/iio/machine.h
+++ b/include/linux/iio/machine.h
@@ -19,11 +19,13 @@
* @consumer_dev_name: Name to uniquely identify the consumer device.
* @consumer_channel: Unique name used to identify the channel on the
* consumer side.
+ * @consumer_data: Data about the channel for use by the consumer driver.
*/
struct iio_map {
const char *adc_channel_label;
const char *consumer_dev_name;
const char *consumer_channel;
+ void *consumer_data;
};
#endif
diff --git a/include/linux/iio/types.h b/include/linux/iio/types.h
index 5c647ec..88bf0f0 100644
--- a/include/linux/iio/types.h
+++ b/include/linux/iio/types.h
@@ -28,6 +28,7 @@
IIO_CAPACITANCE,
IIO_ALTVOLTAGE,
IIO_CCT,
+ IIO_PRESSURE,
};
enum iio_modifier {
@@ -58,5 +59,6 @@
#define IIO_VAL_INT_PLUS_NANO 3
#define IIO_VAL_INT_PLUS_MICRO_DB 4
#define IIO_VAL_FRACTIONAL 10
+#define IIO_VAL_FRACTIONAL_LOG2 11
#endif /* _IIO_TYPES_H_ */
diff --git a/include/linux/init.h b/include/linux/init.h
index e59041e..f63692d 100644
--- a/include/linux/init.h
+++ b/include/linux/init.h
@@ -93,13 +93,13 @@
#define __exit __section(.exit.text) __exitused __cold notrace
-/* Used for HOTPLUG */
-#define __devinit __section(.devinit.text) __cold notrace
-#define __devinitdata __section(.devinit.data)
-#define __devinitconst __constsection(.devinit.rodata)
-#define __devexit __section(.devexit.text) __exitused __cold notrace
-#define __devexitdata __section(.devexit.data)
-#define __devexitconst __constsection(.devexit.rodata)
+/* Used for HOTPLUG, but that is always enabled now, so just make them noops */
+#define __devinit
+#define __devinitdata
+#define __devinitconst
+#define __devexit
+#define __devexitdata
+#define __devexitconst
/* Used for HOTPLUG_CPU */
#define __cpuinit __section(.cpuinit.text) __cold notrace
@@ -126,10 +126,6 @@
#define __INITRODATA .section ".init.rodata","a",%progbits
#define __FINITDATA .previous
-#define __DEVINIT .section ".devinit.text", "ax"
-#define __DEVINITDATA .section ".devinit.data", "aw"
-#define __DEVINITRODATA .section ".devinit.rodata", "a"
-
#define __CPUINIT .section ".cpuinit.text", "ax"
#define __CPUINITDATA .section ".cpuinit.data", "aw"
#define __CPUINITRODATA .section ".cpuinit.rodata", "a"
diff --git a/drivers/staging/ipack/ipack.h b/include/linux/ipack.h
similarity index 65%
rename from drivers/staging/ipack/ipack.h
rename to include/linux/ipack.h
index d8e3bb6..fea12cb 100644
--- a/drivers/staging/ipack/ipack.h
+++ b/include/linux/ipack.h
@@ -1,8 +1,8 @@
/*
* Industry-pack bus.
*
- * (C) 2011 Samuel Iglesias Gonsalvez <siglesia@cern.ch>, CERN
- * (C) 2012 Samuel Iglesias Gonsalvez <siglesias@igalia.com>, Igalia
+ * Copyright (C) 2011-2012 CERN (www.cern.ch)
+ * Author: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
@@ -13,8 +13,6 @@
#include <linux/device.h>
#include <linux/interrupt.h>
-#include "ipack_ids.h"
-
#define IPACK_IDPROM_OFFSET_I 0x01
#define IPACK_IDPROM_OFFSET_P 0x03
#define IPACK_IDPROM_OFFSET_A 0x05
@@ -28,31 +26,63 @@
#define IPACK_IDPROM_OFFSET_NUM_BYTES 0x15
#define IPACK_IDPROM_OFFSET_CRC 0x17
+/*
+ * IndustryPack Fromat, Vendor and Device IDs.
+ */
+
+/* ID section format versions */
+#define IPACK_ID_VERSION_INVALID 0x00
+#define IPACK_ID_VERSION_1 0x01
+#define IPACK_ID_VERSION_2 0x02
+
+/* Vendors and devices. Sort key: vendor first, device next. */
+#define IPACK1_VENDOR_ID_RESERVED1 0x00
+#define IPACK1_VENDOR_ID_RESERVED2 0xFF
+#define IPACK1_VENDOR_ID_UNREGISTRED01 0x01
+#define IPACK1_VENDOR_ID_UNREGISTRED02 0x02
+#define IPACK1_VENDOR_ID_UNREGISTRED03 0x03
+#define IPACK1_VENDOR_ID_UNREGISTRED04 0x04
+#define IPACK1_VENDOR_ID_UNREGISTRED05 0x05
+#define IPACK1_VENDOR_ID_UNREGISTRED06 0x06
+#define IPACK1_VENDOR_ID_UNREGISTRED07 0x07
+#define IPACK1_VENDOR_ID_UNREGISTRED08 0x08
+#define IPACK1_VENDOR_ID_UNREGISTRED09 0x09
+#define IPACK1_VENDOR_ID_UNREGISTRED10 0x0A
+#define IPACK1_VENDOR_ID_UNREGISTRED11 0x0B
+#define IPACK1_VENDOR_ID_UNREGISTRED12 0x0C
+#define IPACK1_VENDOR_ID_UNREGISTRED13 0x0D
+#define IPACK1_VENDOR_ID_UNREGISTRED14 0x0E
+#define IPACK1_VENDOR_ID_UNREGISTRED15 0x0F
+
+#define IPACK1_VENDOR_ID_SBS 0xF0
+#define IPACK1_DEVICE_ID_SBS_OCTAL_232 0x22
+#define IPACK1_DEVICE_ID_SBS_OCTAL_422 0x2A
+#define IPACK1_DEVICE_ID_SBS_OCTAL_485 0x48
+
struct ipack_bus_ops;
struct ipack_driver;
enum ipack_space {
IPACK_IO_SPACE = 0,
- IPACK_ID_SPACE = 1,
- IPACK_MEM_SPACE = 2,
+ IPACK_ID_SPACE,
IPACK_INT_SPACE,
+ IPACK_MEM8_SPACE,
+ IPACK_MEM16_SPACE,
+ /* Dummy for counting the number of entries. Must remain the last
+ * entry */
+ IPACK_SPACE_COUNT,
};
/**
- * struct ipack_addr_space - Virtual address space mapped for a specified type.
- *
- * @address: virtual address
- * @size: size of the mapped space
*/
-struct ipack_addr_space {
- void __iomem *address;
- unsigned int size;
+struct ipack_region {
+ phys_addr_t start;
+ size_t size;
};
/**
* struct ipack_device
*
- * @bus_nr: IP bus number where the device is plugged
* @slot: Slot where the device is plugged in the carrier board
* @bus: ipack_bus_device where the device is plugged to.
* @id_space: Virtual address to ID space.
@@ -65,14 +95,11 @@
* by the carrier board throught bus->ops.
*/
struct ipack_device {
- unsigned int bus_nr;
unsigned int slot;
struct ipack_bus_device *bus;
- struct ipack_addr_space id_space;
- struct ipack_addr_space io_space;
- struct ipack_addr_space int_space;
- struct ipack_addr_space mem_space;
struct device dev;
+ void (*release) (struct ipack_device *dev);
+ struct ipack_region region[IPACK_SPACE_COUNT];
u8 *id;
size_t id_avail;
u32 id_vendor;
@@ -84,10 +111,11 @@
};
/**
- * struct ipack_driver_ops -- callbacks to mezzanine driver for installing/removing one device
+ * struct ipack_driver_ops -- Callbacks to IPack device driver
*
- * @probe: Probe function
- * @remove: tell the driver that the carrier board wants to remove one device
+ * @probe: Probe function
+ * @remove: Prepare imminent removal of the device. Services provided by the
+ * device should be revoked.
*/
struct ipack_driver_ops {
@@ -96,10 +124,10 @@
};
/**
- * struct ipack_driver -- Specific data to each ipack board driver
+ * struct ipack_driver -- Specific data to each ipack device driver
*
- * @driver: Device driver kernel representation
- * @ops: Mezzanine driver operations specific for the ipack bus.
+ * @driver: Device driver kernel representation
+ * @ops: Callbacks provided by the IPack device driver
*/
struct ipack_driver {
struct device_driver driver;
@@ -125,8 +153,6 @@
* @reset_timeout: Resets the state returned by get_timeout.
*/
struct ipack_bus_ops {
- int (*map_space) (struct ipack_device *dev, unsigned int memory_size, int space);
- int (*unmap_space) (struct ipack_device *dev, int space);
int (*request_irq) (struct ipack_device *dev,
irqreturn_t (*handler)(void *), void *arg);
int (*free_irq) (struct ipack_device *dev);
@@ -171,7 +197,7 @@
int ipack_bus_unregister(struct ipack_bus_device *bus);
/**
- * ipack_driver_register -- Register a new driver
+ * ipack_driver_register -- Register a new ipack device driver
*
* Called by a ipack driver to register itself as a driver
* that can manage ipack devices.
@@ -181,15 +207,18 @@
void ipack_driver_unregister(struct ipack_driver *edrv);
/**
- * ipack_device_register -- register a new mezzanine device
+ * ipack_device_register -- register an IPack device with the kernel
+ * @dev: the new device to register.
*
- * @bus: ipack bus device it is plugged to.
- * @slot: slot position in the bus device.
+ * Register a new IPack device ("module" in IndustryPack jargon). The call
+ * is done by the carrier driver. The carrier should populate the fields
+ * bus and slot as well as the region array of @dev prior to calling this
+ * function. The rest of the fields will be allocated and populated
+ * during registration.
*
- * Register a new ipack device (mezzanine device). The call is done by
- * the carrier device driver.
+ * Return zero on success or error code on failure.
*/
-struct ipack_device *ipack_device_register(struct ipack_bus_device *bus, int slot);
+int ipack_device_register(struct ipack_device *dev);
void ipack_device_unregister(struct ipack_device *dev);
/**
@@ -200,8 +229,7 @@
* in a generic manner.
*/
#define DEFINE_IPACK_DEVICE_TABLE(_table) \
- const struct ipack_device_id _table[] __devinitconst
-
+ const struct ipack_device_id _table[]
/**
* IPACK_DEVICE - macro used to describe a specific IndustryPack device
* @_format: the format version (currently either 1 or 2, 8 bit value)
diff --git a/include/linux/kobject.h b/include/linux/kobject.h
index 1e57449..939b112 100644
--- a/include/linux/kobject.h
+++ b/include/linux/kobject.h
@@ -203,7 +203,6 @@
/* The global /sys/firmware/ kobject for people to chain off of */
extern struct kobject *firmware_kobj;
-#if defined(CONFIG_HOTPLUG)
int kobject_uevent(struct kobject *kobj, enum kobject_action action);
int kobject_uevent_env(struct kobject *kobj, enum kobject_action action,
char *envp[]);
@@ -213,22 +212,5 @@
int kobject_action_type(const char *buf, size_t count,
enum kobject_action *type);
-#else
-static inline int kobject_uevent(struct kobject *kobj,
- enum kobject_action action)
-{ return 0; }
-static inline int kobject_uevent_env(struct kobject *kobj,
- enum kobject_action action,
- char *envp[])
-{ return 0; }
-
-static inline __printf(2, 3)
-int add_uevent_var(struct kobj_uevent_env *env, const char *format, ...)
-{ return -ENOMEM; }
-
-static inline int kobject_action_type(const char *buf, size_t count,
- enum kobject_action *type)
-{ return -EINVAL; }
-#endif
#endif /* _KOBJECT_H_ */
diff --git a/include/linux/mfd/88pm80x.h b/include/linux/mfd/88pm80x.h
index a0ca0dc..478672e 100644
--- a/include/linux/mfd/88pm80x.h
+++ b/include/linux/mfd/88pm80x.h
@@ -364,6 +364,6 @@
#endif
extern int pm80x_init(struct i2c_client *client,
- const struct i2c_device_id *id) __devinit;
+ const struct i2c_device_id *id);
extern int pm80x_deinit(struct i2c_client *client);
#endif /* __LINUX_MFD_88PM80X_H */
diff --git a/include/linux/mfd/abx500/ab8500.h b/include/linux/mfd/abx500/ab8500.h
index 1491044..1cb5698 100644
--- a/include/linux/mfd/abx500/ab8500.h
+++ b/include/linux/mfd/abx500/ab8500.h
@@ -291,9 +291,9 @@
struct ab8500_codec_platform_data *codec;
};
-extern int __devinit ab8500_init(struct ab8500 *ab8500,
+extern int ab8500_init(struct ab8500 *ab8500,
enum ab8500_version version);
-extern int __devexit ab8500_exit(struct ab8500 *ab8500);
+extern int ab8500_exit(struct ab8500 *ab8500);
extern int ab8500_suspend(struct ab8500 *ab8500);
diff --git a/include/linux/mfd/pm8xxx/irq.h b/include/linux/mfd/pm8xxx/irq.h
index 4b21769..f83d6b4 100644
--- a/include/linux/mfd/pm8xxx/irq.h
+++ b/include/linux/mfd/pm8xxx/irq.h
@@ -37,21 +37,21 @@
#ifdef CONFIG_MFD_PM8XXX_IRQ
int pm8xxx_get_irq_stat(struct pm_irq_chip *chip, int irq);
-struct pm_irq_chip * __devinit pm8xxx_irq_init(struct device *dev,
+struct pm_irq_chip *pm8xxx_irq_init(struct device *dev,
const struct pm8xxx_irq_platform_data *pdata);
-int __devexit pm8xxx_irq_exit(struct pm_irq_chip *chip);
+int pm8xxx_irq_exit(struct pm_irq_chip *chip);
#else
static inline int pm8xxx_get_irq_stat(struct pm_irq_chip *chip, int irq)
{
return -ENXIO;
}
-static inline struct pm_irq_chip * __devinit pm8xxx_irq_init(
+static inline struct pm_irq_chip *pm8xxx_irq_init(
const struct device *dev,
const struct pm8xxx_irq_platform_data *pdata)
{
return ERR_PTR(-ENXIO);
}
-static inline int __devexit pm8xxx_irq_exit(struct pm_irq_chip *chip)
+static inline int pm8xxx_irq_exit(struct pm_irq_chip *chip)
{
return -ENXIO;
}
diff --git a/include/linux/mfd/rtsx_common.h b/include/linux/mfd/rtsx_common.h
new file mode 100644
index 0000000..a8d393e
--- /dev/null
+++ b/include/linux/mfd/rtsx_common.h
@@ -0,0 +1,48 @@
+/* Driver for Realtek driver-based card reader
+ *
+ * Copyright(c) 2009 Realtek Semiconductor Corp. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * Author:
+ * Wei WANG <wei_wang@realsil.com.cn>
+ * No. 450, Shenhu Road, Suzhou Industry Park, Suzhou, China
+ */
+
+#ifndef __RTSX_COMMON_H
+#define __RTSX_COMMON_H
+
+#define DRV_NAME_RTSX_PCI "rtsx_pci"
+#define DRV_NAME_RTSX_PCI_SDMMC "rtsx_pci_sdmmc"
+#define DRV_NAME_RTSX_PCI_MS "rtsx_pci_ms"
+
+#define RTSX_REG_PAIR(addr, val) (((u32)(addr) << 16) | (u8)(val))
+
+#define RTSX_SSC_DEPTH_4M 0x01
+#define RTSX_SSC_DEPTH_2M 0x02
+#define RTSX_SSC_DEPTH_1M 0x03
+#define RTSX_SSC_DEPTH_500K 0x04
+#define RTSX_SSC_DEPTH_250K 0x05
+
+#define RTSX_SD_CARD 0
+#define RTSX_MS_CARD 1
+
+struct platform_device;
+
+struct rtsx_slot {
+ struct platform_device *p_dev;
+ void (*card_event)(struct platform_device *p_dev);
+};
+
+#endif
diff --git a/include/linux/mfd/rtsx_pci.h b/include/linux/mfd/rtsx_pci.h
new file mode 100644
index 0000000..060b721
--- /dev/null
+++ b/include/linux/mfd/rtsx_pci.h
@@ -0,0 +1,794 @@
+/* Driver for Realtek PCI-Express card reader
+ *
+ * Copyright(c) 2009 Realtek Semiconductor Corp. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * Author:
+ * Wei WANG <wei_wang@realsil.com.cn>
+ * No. 450, Shenhu Road, Suzhou Industry Park, Suzhou, China
+ */
+
+#ifndef __RTSX_PCI_H
+#define __RTSX_PCI_H
+
+#include <linux/sched.h>
+#include <linux/pci.h>
+
+#include "rtsx_common.h"
+
+#define MAX_RW_REG_CNT 1024
+
+/* PCI Operation Register Address */
+#define RTSX_HCBAR 0x00
+#define RTSX_HCBCTLR 0x04
+#define RTSX_HDBAR 0x08
+#define RTSX_HDBCTLR 0x0C
+#define RTSX_HAIMR 0x10
+#define RTSX_BIPR 0x14
+#define RTSX_BIER 0x18
+
+/* Host command buffer control register */
+#define STOP_CMD (0x01 << 28)
+
+/* Host data buffer control register */
+#define SDMA_MODE 0x00
+#define ADMA_MODE (0x02 << 26)
+#define STOP_DMA (0x01 << 28)
+#define TRIG_DMA (0x01 << 31)
+
+/* Host access internal memory register */
+#define HAIMR_TRANS_START (0x01 << 31)
+#define HAIMR_READ 0x00
+#define HAIMR_WRITE (0x01 << 30)
+#define HAIMR_READ_START (HAIMR_TRANS_START | HAIMR_READ)
+#define HAIMR_WRITE_START (HAIMR_TRANS_START | HAIMR_WRITE)
+#define HAIMR_TRANS_END (HAIMR_TRANS_START)
+
+/* Bus interrupt pending register */
+#define CMD_DONE_INT (1 << 31)
+#define DATA_DONE_INT (1 << 30)
+#define TRANS_OK_INT (1 << 29)
+#define TRANS_FAIL_INT (1 << 28)
+#define XD_INT (1 << 27)
+#define MS_INT (1 << 26)
+#define SD_INT (1 << 25)
+#define GPIO0_INT (1 << 24)
+#define OC_INT (1 << 23)
+#define SD_WRITE_PROTECT (1 << 19)
+#define XD_EXIST (1 << 18)
+#define MS_EXIST (1 << 17)
+#define SD_EXIST (1 << 16)
+#define DELINK_INT GPIO0_INT
+#define MS_OC_INT (1 << 23)
+#define SD_OC_INT (1 << 22)
+
+#define CARD_INT (XD_INT | MS_INT | SD_INT)
+#define NEED_COMPLETE_INT (DATA_DONE_INT | TRANS_OK_INT | TRANS_FAIL_INT)
+#define RTSX_INT (CMD_DONE_INT | NEED_COMPLETE_INT | \
+ CARD_INT | GPIO0_INT | OC_INT)
+
+#define CARD_EXIST (XD_EXIST | MS_EXIST | SD_EXIST)
+
+/* Bus interrupt enable register */
+#define CMD_DONE_INT_EN (1 << 31)
+#define DATA_DONE_INT_EN (1 << 30)
+#define TRANS_OK_INT_EN (1 << 29)
+#define TRANS_FAIL_INT_EN (1 << 28)
+#define XD_INT_EN (1 << 27)
+#define MS_INT_EN (1 << 26)
+#define SD_INT_EN (1 << 25)
+#define GPIO0_INT_EN (1 << 24)
+#define OC_INT_EN (1 << 23)
+#define DELINK_INT_EN GPIO0_INT_EN
+#define MS_OC_INT_EN (1 << 23)
+#define SD_OC_INT_EN (1 << 22)
+
+#define READ_REG_CMD 0
+#define WRITE_REG_CMD 1
+#define CHECK_REG_CMD 2
+
+/*
+ * macros for easy use
+ */
+#define rtsx_pci_writel(pcr, reg, value) \
+ iowrite32(value, (pcr)->remap_addr + reg)
+#define rtsx_pci_readl(pcr, reg) \
+ ioread32((pcr)->remap_addr + reg)
+#define rtsx_pci_writew(pcr, reg, value) \
+ iowrite16(value, (pcr)->remap_addr + reg)
+#define rtsx_pci_readw(pcr, reg) \
+ ioread16((pcr)->remap_addr + reg)
+#define rtsx_pci_writeb(pcr, reg, value) \
+ iowrite8(value, (pcr)->remap_addr + reg)
+#define rtsx_pci_readb(pcr, reg) \
+ ioread8((pcr)->remap_addr + reg)
+
+#define rtsx_pci_read_config_byte(pcr, where, val) \
+ pci_read_config_byte((pcr)->pci, where, val)
+
+#define rtsx_pci_write_config_byte(pcr, where, val) \
+ pci_write_config_byte((pcr)->pci, where, val)
+
+#define rtsx_pci_read_config_dword(pcr, where, val) \
+ pci_read_config_dword((pcr)->pci, where, val)
+
+#define rtsx_pci_write_config_dword(pcr, where, val) \
+ pci_write_config_dword((pcr)->pci, where, val)
+
+#define STATE_TRANS_NONE 0
+#define STATE_TRANS_CMD 1
+#define STATE_TRANS_BUF 2
+#define STATE_TRANS_SG 3
+
+#define TRANS_NOT_READY 0
+#define TRANS_RESULT_OK 1
+#define TRANS_RESULT_FAIL 2
+#define TRANS_NO_DEVICE 3
+
+#define RTSX_RESV_BUF_LEN 4096
+#define HOST_CMDS_BUF_LEN 1024
+#define HOST_SG_TBL_BUF_LEN (RTSX_RESV_BUF_LEN - HOST_CMDS_BUF_LEN)
+#define HOST_SG_TBL_ITEMS (HOST_SG_TBL_BUF_LEN / 8)
+#define MAX_SG_ITEM_LEN 0x80000
+
+#define HOST_TO_DEVICE 0
+#define DEVICE_TO_HOST 1
+
+#define MAX_PHASE 31
+#define RX_TUNING_CNT 3
+
+/* SG descriptor */
+#define SG_INT 0x04
+#define SG_END 0x02
+#define SG_VALID 0x01
+
+#define SG_NO_OP 0x00
+#define SG_TRANS_DATA (0x02 << 4)
+#define SG_LINK_DESC (0x03 << 4)
+
+/* SD bank voltage */
+#define SD_IO_3V3 0
+#define SD_IO_1V8 1
+
+
+/* Card Clock Enable Register */
+#define SD_CLK_EN 0x04
+#define MS_CLK_EN 0x08
+
+/* Card Select Register */
+#define SD_MOD_SEL 2
+#define MS_MOD_SEL 3
+
+/* Card Output Enable Register */
+#define SD_OUTPUT_EN 0x04
+#define MS_OUTPUT_EN 0x08
+
+/* CARD_SHARE_MODE */
+#define CARD_SHARE_MASK 0x0F
+#define CARD_SHARE_MULTI_LUN 0x00
+#define CARD_SHARE_NORMAL 0x00
+#define CARD_SHARE_48_SD 0x04
+#define CARD_SHARE_48_MS 0x08
+/* CARD_SHARE_MODE for barossa */
+#define CARD_SHARE_BAROSSA_SD 0x01
+#define CARD_SHARE_BAROSSA_MS 0x02
+
+/* SD30_DRIVE_SEL */
+#define DRIVER_TYPE_A 0x05
+#define DRIVER_TYPE_B 0x03
+#define DRIVER_TYPE_C 0x02
+#define DRIVER_TYPE_D 0x01
+
+/* FPDCTL */
+#define SSC_POWER_DOWN 0x01
+#define SD_OC_POWER_DOWN 0x02
+#define ALL_POWER_DOWN 0x07
+#define OC_POWER_DOWN 0x06
+
+/* CLK_CTL */
+#define CHANGE_CLK 0x01
+
+/* LDO_CTL */
+#define BPP_LDO_POWB 0x03
+#define BPP_LDO_ON 0x00
+#define BPP_LDO_SUSPEND 0x02
+#define BPP_LDO_OFF 0x03
+
+/* CD_PAD_CTL */
+#define CD_DISABLE_MASK 0x07
+#define MS_CD_DISABLE 0x04
+#define SD_CD_DISABLE 0x02
+#define XD_CD_DISABLE 0x01
+#define CD_DISABLE 0x07
+#define CD_ENABLE 0x00
+#define MS_CD_EN_ONLY 0x03
+#define SD_CD_EN_ONLY 0x05
+#define XD_CD_EN_ONLY 0x06
+#define FORCE_CD_LOW_MASK 0x38
+#define FORCE_CD_XD_LOW 0x08
+#define FORCE_CD_SD_LOW 0x10
+#define FORCE_CD_MS_LOW 0x20
+#define CD_AUTO_DISABLE 0x40
+
+/* SD_STAT1 */
+#define SD_CRC7_ERR 0x80
+#define SD_CRC16_ERR 0x40
+#define SD_CRC_WRITE_ERR 0x20
+#define SD_CRC_WRITE_ERR_MASK 0x1C
+#define GET_CRC_TIME_OUT 0x02
+#define SD_TUNING_COMPARE_ERR 0x01
+
+/* SD_STAT2 */
+#define SD_RSP_80CLK_TIMEOUT 0x01
+
+/* SD_BUS_STAT */
+#define SD_CLK_TOGGLE_EN 0x80
+#define SD_CLK_FORCE_STOP 0x40
+#define SD_DAT3_STATUS 0x10
+#define SD_DAT2_STATUS 0x08
+#define SD_DAT1_STATUS 0x04
+#define SD_DAT0_STATUS 0x02
+#define SD_CMD_STATUS 0x01
+
+/* SD_PAD_CTL */
+#define SD_IO_USING_1V8 0x80
+#define SD_IO_USING_3V3 0x7F
+#define TYPE_A_DRIVING 0x00
+#define TYPE_B_DRIVING 0x01
+#define TYPE_C_DRIVING 0x02
+#define TYPE_D_DRIVING 0x03
+
+/* SD_SAMPLE_POINT_CTL */
+#define DDR_FIX_RX_DAT 0x00
+#define DDR_VAR_RX_DAT 0x80
+#define DDR_FIX_RX_DAT_EDGE 0x00
+#define DDR_FIX_RX_DAT_14_DELAY 0x40
+#define DDR_FIX_RX_CMD 0x00
+#define DDR_VAR_RX_CMD 0x20
+#define DDR_FIX_RX_CMD_POS_EDGE 0x00
+#define DDR_FIX_RX_CMD_14_DELAY 0x10
+#define SD20_RX_POS_EDGE 0x00
+#define SD20_RX_14_DELAY 0x08
+#define SD20_RX_SEL_MASK 0x08
+
+/* SD_PUSH_POINT_CTL */
+#define DDR_FIX_TX_CMD_DAT 0x00
+#define DDR_VAR_TX_CMD_DAT 0x80
+#define DDR_FIX_TX_DAT_14_TSU 0x00
+#define DDR_FIX_TX_DAT_12_TSU 0x40
+#define DDR_FIX_TX_CMD_NEG_EDGE 0x00
+#define DDR_FIX_TX_CMD_14_AHEAD 0x20
+#define SD20_TX_NEG_EDGE 0x00
+#define SD20_TX_14_AHEAD 0x10
+#define SD20_TX_SEL_MASK 0x10
+#define DDR_VAR_SDCLK_POL_SWAP 0x01
+
+/* SD_TRANSFER */
+#define SD_TRANSFER_START 0x80
+#define SD_TRANSFER_END 0x40
+#define SD_STAT_IDLE 0x20
+#define SD_TRANSFER_ERR 0x10
+/* SD Transfer Mode definition */
+#define SD_TM_NORMAL_WRITE 0x00
+#define SD_TM_AUTO_WRITE_3 0x01
+#define SD_TM_AUTO_WRITE_4 0x02
+#define SD_TM_AUTO_READ_3 0x05
+#define SD_TM_AUTO_READ_4 0x06
+#define SD_TM_CMD_RSP 0x08
+#define SD_TM_AUTO_WRITE_1 0x09
+#define SD_TM_AUTO_WRITE_2 0x0A
+#define SD_TM_NORMAL_READ 0x0C
+#define SD_TM_AUTO_READ_1 0x0D
+#define SD_TM_AUTO_READ_2 0x0E
+#define SD_TM_AUTO_TUNING 0x0F
+
+/* SD_VPTX_CTL / SD_VPRX_CTL */
+#define PHASE_CHANGE 0x80
+#define PHASE_NOT_RESET 0x40
+
+/* SD_DCMPS_TX_CTL / SD_DCMPS_RX_CTL */
+#define DCMPS_CHANGE 0x80
+#define DCMPS_CHANGE_DONE 0x40
+#define DCMPS_ERROR 0x20
+#define DCMPS_CURRENT_PHASE 0x1F
+
+/* SD Configure 1 Register */
+#define SD_CLK_DIVIDE_0 0x00
+#define SD_CLK_DIVIDE_256 0xC0
+#define SD_CLK_DIVIDE_128 0x80
+#define SD_BUS_WIDTH_1BIT 0x00
+#define SD_BUS_WIDTH_4BIT 0x01
+#define SD_BUS_WIDTH_8BIT 0x02
+#define SD_ASYNC_FIFO_NOT_RST 0x10
+#define SD_20_MODE 0x00
+#define SD_DDR_MODE 0x04
+#define SD_30_MODE 0x08
+
+#define SD_CLK_DIVIDE_MASK 0xC0
+
+/* SD_CMD_STATE */
+#define SD_CMD_IDLE 0x80
+
+/* SD_DATA_STATE */
+#define SD_DATA_IDLE 0x80
+
+/* DCM_DRP_CTL */
+#define DCM_RESET 0x08
+#define DCM_LOCKED 0x04
+#define DCM_208M 0x00
+#define DCM_TX 0x01
+#define DCM_RX 0x02
+
+/* DCM_DRP_TRIG */
+#define DRP_START 0x80
+#define DRP_DONE 0x40
+
+/* DCM_DRP_CFG */
+#define DRP_WRITE 0x80
+#define DRP_READ 0x00
+#define DCM_WRITE_ADDRESS_50 0x50
+#define DCM_WRITE_ADDRESS_51 0x51
+#define DCM_READ_ADDRESS_00 0x00
+#define DCM_READ_ADDRESS_51 0x51
+
+/* IRQSTAT0 */
+#define DMA_DONE_INT 0x80
+#define SUSPEND_INT 0x40
+#define LINK_RDY_INT 0x20
+#define LINK_DOWN_INT 0x10
+
+/* DMACTL */
+#define DMA_RST 0x80
+#define DMA_BUSY 0x04
+#define DMA_DIR_TO_CARD 0x00
+#define DMA_DIR_FROM_CARD 0x02
+#define DMA_EN 0x01
+#define DMA_128 (0 << 4)
+#define DMA_256 (1 << 4)
+#define DMA_512 (2 << 4)
+#define DMA_1024 (3 << 4)
+#define DMA_PACK_SIZE_MASK 0x30
+
+/* SSC_CTL1 */
+#define SSC_RSTB 0x80
+#define SSC_8X_EN 0x40
+#define SSC_FIX_FRAC 0x20
+#define SSC_SEL_1M 0x00
+#define SSC_SEL_2M 0x08
+#define SSC_SEL_4M 0x10
+#define SSC_SEL_8M 0x18
+
+/* SSC_CTL2 */
+#define SSC_DEPTH_MASK 0x07
+#define SSC_DEPTH_DISALBE 0x00
+#define SSC_DEPTH_4M 0x01
+#define SSC_DEPTH_2M 0x02
+#define SSC_DEPTH_1M 0x03
+#define SSC_DEPTH_500K 0x04
+#define SSC_DEPTH_250K 0x05
+
+/* System Clock Control Register */
+#define CLK_LOW_FREQ 0x01
+
+/* System Clock Divider Register */
+#define CLK_DIV_1 0x01
+#define CLK_DIV_2 0x02
+#define CLK_DIV_4 0x03
+#define CLK_DIV_8 0x04
+
+/* MS_CFG */
+#define SAMPLE_TIME_RISING 0x00
+#define SAMPLE_TIME_FALLING 0x80
+#define PUSH_TIME_DEFAULT 0x00
+#define PUSH_TIME_ODD 0x40
+#define NO_EXTEND_TOGGLE 0x00
+#define EXTEND_TOGGLE_CHK 0x20
+#define MS_BUS_WIDTH_1 0x00
+#define MS_BUS_WIDTH_4 0x10
+#define MS_BUS_WIDTH_8 0x18
+#define MS_2K_SECTOR_MODE 0x04
+#define MS_512_SECTOR_MODE 0x00
+#define MS_TOGGLE_TIMEOUT_EN 0x00
+#define MS_TOGGLE_TIMEOUT_DISEN 0x01
+#define MS_NO_CHECK_INT 0x02
+
+/* MS_TRANS_CFG */
+#define WAIT_INT 0x80
+#define NO_WAIT_INT 0x00
+#define NO_AUTO_READ_INT_REG 0x00
+#define AUTO_READ_INT_REG 0x40
+#define MS_CRC16_ERR 0x20
+#define MS_RDY_TIMEOUT 0x10
+#define MS_INT_CMDNK 0x08
+#define MS_INT_BREQ 0x04
+#define MS_INT_ERR 0x02
+#define MS_INT_CED 0x01
+
+/* MS_TRANSFER */
+#define MS_TRANSFER_START 0x80
+#define MS_TRANSFER_END 0x40
+#define MS_TRANSFER_ERR 0x20
+#define MS_BS_STATE 0x10
+#define MS_TM_READ_BYTES 0x00
+#define MS_TM_NORMAL_READ 0x01
+#define MS_TM_WRITE_BYTES 0x04
+#define MS_TM_NORMAL_WRITE 0x05
+#define MS_TM_AUTO_READ 0x08
+#define MS_TM_AUTO_WRITE 0x0C
+
+/* SD Configure 2 Register */
+#define SD_CALCULATE_CRC7 0x00
+#define SD_NO_CALCULATE_CRC7 0x80
+#define SD_CHECK_CRC16 0x00
+#define SD_NO_CHECK_CRC16 0x40
+#define SD_NO_CHECK_WAIT_CRC_TO 0x20
+#define SD_WAIT_BUSY_END 0x08
+#define SD_NO_WAIT_BUSY_END 0x00
+#define SD_CHECK_CRC7 0x00
+#define SD_NO_CHECK_CRC7 0x04
+#define SD_RSP_LEN_0 0x00
+#define SD_RSP_LEN_6 0x01
+#define SD_RSP_LEN_17 0x02
+/* SD/MMC Response Type Definition */
+#define SD_RSP_TYPE_R0 0x04
+#define SD_RSP_TYPE_R1 0x01
+#define SD_RSP_TYPE_R1b 0x09
+#define SD_RSP_TYPE_R2 0x02
+#define SD_RSP_TYPE_R3 0x05
+#define SD_RSP_TYPE_R4 0x05
+#define SD_RSP_TYPE_R5 0x01
+#define SD_RSP_TYPE_R6 0x01
+#define SD_RSP_TYPE_R7 0x01
+
+/* SD_CONFIURE3 */
+#define SD_RSP_80CLK_TIMEOUT_EN 0x01
+
+/* Card Transfer Reset Register */
+#define SPI_STOP 0x01
+#define XD_STOP 0x02
+#define SD_STOP 0x04
+#define MS_STOP 0x08
+#define SPI_CLR_ERR 0x10
+#define XD_CLR_ERR 0x20
+#define SD_CLR_ERR 0x40
+#define MS_CLR_ERR 0x80
+
+/* Card Data Source Register */
+#define PINGPONG_BUFFER 0x01
+#define RING_BUFFER 0x00
+
+/* Card Power Control Register */
+#define PMOS_STRG_MASK 0x10
+#define PMOS_STRG_800mA 0x10
+#define PMOS_STRG_400mA 0x00
+#define SD_POWER_OFF 0x03
+#define SD_PARTIAL_POWER_ON 0x01
+#define SD_POWER_ON 0x00
+#define SD_POWER_MASK 0x03
+#define MS_POWER_OFF 0x0C
+#define MS_PARTIAL_POWER_ON 0x04
+#define MS_POWER_ON 0x00
+#define MS_POWER_MASK 0x0C
+#define BPP_POWER_OFF 0x0F
+#define BPP_POWER_5_PERCENT_ON 0x0E
+#define BPP_POWER_10_PERCENT_ON 0x0C
+#define BPP_POWER_15_PERCENT_ON 0x08
+#define BPP_POWER_ON 0x00
+#define BPP_POWER_MASK 0x0F
+
+/* PWR_GATE_CTRL */
+#define PWR_GATE_EN 0x01
+#define LDO3318_PWR_MASK 0x06
+#define LDO_ON 0x00
+#define LDO_SUSPEND 0x04
+#define LDO_OFF 0x06
+
+/* CARD_CLK_SOURCE */
+#define CRC_FIX_CLK (0x00 << 0)
+#define CRC_VAR_CLK0 (0x01 << 0)
+#define CRC_VAR_CLK1 (0x02 << 0)
+#define SD30_FIX_CLK (0x00 << 2)
+#define SD30_VAR_CLK0 (0x01 << 2)
+#define SD30_VAR_CLK1 (0x02 << 2)
+#define SAMPLE_FIX_CLK (0x00 << 4)
+#define SAMPLE_VAR_CLK0 (0x01 << 4)
+#define SAMPLE_VAR_CLK1 (0x02 << 4)
+
+#define MS_CFG 0xFD40
+#define MS_TPC 0xFD41
+#define MS_TRANS_CFG 0xFD42
+#define MS_TRANSFER 0xFD43
+#define MS_INT_REG 0xFD44
+#define MS_BYTE_CNT 0xFD45
+#define MS_SECTOR_CNT_L 0xFD46
+#define MS_SECTOR_CNT_H 0xFD47
+#define MS_DBUS_H 0xFD48
+
+#define SD_CFG1 0xFDA0
+#define SD_CFG2 0xFDA1
+#define SD_CFG3 0xFDA2
+#define SD_STAT1 0xFDA3
+#define SD_STAT2 0xFDA4
+#define SD_BUS_STAT 0xFDA5
+#define SD_PAD_CTL 0xFDA6
+#define SD_SAMPLE_POINT_CTL 0xFDA7
+#define SD_PUSH_POINT_CTL 0xFDA8
+#define SD_CMD0 0xFDA9
+#define SD_CMD1 0xFDAA
+#define SD_CMD2 0xFDAB
+#define SD_CMD3 0xFDAC
+#define SD_CMD4 0xFDAD
+#define SD_CMD5 0xFDAE
+#define SD_BYTE_CNT_L 0xFDAF
+#define SD_BYTE_CNT_H 0xFDB0
+#define SD_BLOCK_CNT_L 0xFDB1
+#define SD_BLOCK_CNT_H 0xFDB2
+#define SD_TRANSFER 0xFDB3
+#define SD_CMD_STATE 0xFDB5
+#define SD_DATA_STATE 0xFDB6
+
+#define SRCTL 0xFC13
+
+#define DCM_DRP_CTL 0xFC23
+#define DCM_DRP_TRIG 0xFC24
+#define DCM_DRP_CFG 0xFC25
+#define DCM_DRP_WR_DATA_L 0xFC26
+#define DCM_DRP_WR_DATA_H 0xFC27
+#define DCM_DRP_RD_DATA_L 0xFC28
+#define DCM_DRP_RD_DATA_H 0xFC29
+#define SD_VPCLK0_CTL 0xFC2A
+#define SD_VPCLK1_CTL 0xFC2B
+#define SD_DCMPS0_CTL 0xFC2C
+#define SD_DCMPS1_CTL 0xFC2D
+#define SD_VPTX_CTL SD_VPCLK0_CTL
+#define SD_VPRX_CTL SD_VPCLK1_CTL
+#define SD_DCMPS_TX_CTL SD_DCMPS0_CTL
+#define SD_DCMPS_RX_CTL SD_DCMPS1_CTL
+#define CARD_CLK_SOURCE 0xFC2E
+
+#define CARD_PWR_CTL 0xFD50
+#define CARD_CLK_SWITCH 0xFD51
+#define CARD_SHARE_MODE 0xFD52
+#define CARD_DRIVE_SEL 0xFD53
+#define CARD_STOP 0xFD54
+#define CARD_OE 0xFD55
+#define CARD_AUTO_BLINK 0xFD56
+#define CARD_GPIO_DIR 0xFD57
+#define CARD_GPIO 0xFD58
+#define CARD_DATA_SOURCE 0xFD5B
+#define CARD_SELECT 0xFD5C
+#define SD30_DRIVE_SEL 0xFD5E
+#define CARD_CLK_EN 0xFD69
+#define SDIO_CTRL 0xFD6B
+#define CD_PAD_CTL 0xFD73
+
+#define FPDCTL 0xFC00
+#define PDINFO 0xFC01
+
+#define CLK_CTL 0xFC02
+#define CLK_DIV 0xFC03
+#define CLK_SEL 0xFC04
+
+#define SSC_DIV_N_0 0xFC0F
+#define SSC_DIV_N_1 0xFC10
+#define SSC_CTL1 0xFC11
+#define SSC_CTL2 0xFC12
+
+#define RCCTL 0xFC14
+
+#define FPGA_PULL_CTL 0xFC1D
+#define OLT_LED_CTL 0xFC1E
+#define GPIO_CTL 0xFC1F
+
+#define LDO_CTL 0xFC1E
+#define SYS_VER 0xFC32
+
+#define CARD_PULL_CTL1 0xFD60
+#define CARD_PULL_CTL2 0xFD61
+#define CARD_PULL_CTL3 0xFD62
+#define CARD_PULL_CTL4 0xFD63
+#define CARD_PULL_CTL5 0xFD64
+#define CARD_PULL_CTL6 0xFD65
+
+/* PCI Express Related Registers */
+#define IRQEN0 0xFE20
+#define IRQSTAT0 0xFE21
+#define IRQEN1 0xFE22
+#define IRQSTAT1 0xFE23
+#define TLPRIEN 0xFE24
+#define TLPRISTAT 0xFE25
+#define TLPTIEN 0xFE26
+#define TLPTISTAT 0xFE27
+#define DMATC0 0xFE28
+#define DMATC1 0xFE29
+#define DMATC2 0xFE2A
+#define DMATC3 0xFE2B
+#define DMACTL 0xFE2C
+#define BCTL 0xFE2D
+#define RBBC0 0xFE2E
+#define RBBC1 0xFE2F
+#define RBDAT 0xFE30
+#define RBCTL 0xFE34
+#define CFGADDR0 0xFE35
+#define CFGADDR1 0xFE36
+#define CFGDATA0 0xFE37
+#define CFGDATA1 0xFE38
+#define CFGDATA2 0xFE39
+#define CFGDATA3 0xFE3A
+#define CFGRWCTL 0xFE3B
+#define PHYRWCTL 0xFE3C
+#define PHYDATA0 0xFE3D
+#define PHYDATA1 0xFE3E
+#define PHYADDR 0xFE3F
+#define MSGRXDATA0 0xFE40
+#define MSGRXDATA1 0xFE41
+#define MSGRXDATA2 0xFE42
+#define MSGRXDATA3 0xFE43
+#define MSGTXDATA0 0xFE44
+#define MSGTXDATA1 0xFE45
+#define MSGTXDATA2 0xFE46
+#define MSGTXDATA3 0xFE47
+#define MSGTXCTL 0xFE48
+#define PETXCFG 0xFE49
+
+#define CDRESUMECTL 0xFE52
+#define WAKE_SEL_CTL 0xFE54
+#define PME_FORCE_CTL 0xFE56
+#define ASPM_FORCE_CTL 0xFE57
+#define PM_CLK_FORCE_CTL 0xFE58
+#define PERST_GLITCH_WIDTH 0xFE5C
+#define CHANGE_LINK_STATE 0xFE5B
+#define RESET_LOAD_REG 0xFE5E
+#define EFUSE_CONTENT 0xFE5F
+#define HOST_SLEEP_STATE 0xFE60
+#define SDIO_CFG 0xFE70
+
+#define NFTS_TX_CTRL 0xFE72
+
+#define PWR_GATE_CTRL 0xFE75
+#define PWD_SUSPEND_EN 0xFE76
+#define LDO_PWR_SEL 0xFE78
+
+#define DUMMY_REG_RESET_0 0xFE90
+
+/* Memory mapping */
+#define SRAM_BASE 0xE600
+#define RBUF_BASE 0xF400
+#define PPBUF_BASE1 0xF800
+#define PPBUF_BASE2 0xFA00
+#define IMAGE_FLAG_ADDR0 0xCE80
+#define IMAGE_FLAG_ADDR1 0xCE81
+
+#define rtsx_pci_init_cmd(pcr) ((pcr)->ci = 0)
+
+struct rtsx_pcr;
+
+struct pcr_handle {
+ struct rtsx_pcr *pcr;
+};
+
+struct pcr_ops {
+ int (*extra_init_hw)(struct rtsx_pcr *pcr);
+ int (*optimize_phy)(struct rtsx_pcr *pcr);
+ int (*turn_on_led)(struct rtsx_pcr *pcr);
+ int (*turn_off_led)(struct rtsx_pcr *pcr);
+ int (*enable_auto_blink)(struct rtsx_pcr *pcr);
+ int (*disable_auto_blink)(struct rtsx_pcr *pcr);
+ int (*card_power_on)(struct rtsx_pcr *pcr, int card);
+ int (*card_power_off)(struct rtsx_pcr *pcr, int card);
+ unsigned int (*cd_deglitch)(struct rtsx_pcr *pcr);
+};
+
+enum PDEV_STAT {PDEV_STAT_IDLE, PDEV_STAT_RUN};
+
+struct rtsx_pcr {
+ struct pci_dev *pci;
+ unsigned int id;
+
+ /* pci resources */
+ unsigned long addr;
+ void __iomem *remap_addr;
+ int irq;
+
+ /* host reserved buffer */
+ void *rtsx_resv_buf;
+ dma_addr_t rtsx_resv_buf_addr;
+
+ void *host_cmds_ptr;
+ dma_addr_t host_cmds_addr;
+ int ci;
+
+ void *host_sg_tbl_ptr;
+ dma_addr_t host_sg_tbl_addr;
+ int sgi;
+
+ u32 bier;
+ char trans_result;
+
+ unsigned int card_inserted;
+ unsigned int card_removed;
+
+ struct delayed_work carddet_work;
+ struct delayed_work idle_work;
+
+ spinlock_t lock;
+ struct mutex pcr_mutex;
+ struct completion *done;
+ struct completion *finish_me;
+
+ unsigned int cur_clock;
+ bool ms_pmos;
+ bool remove_pci;
+ bool msi_en;
+
+#define EXTRA_CAPS_SD_SDR50 (1 << 0)
+#define EXTRA_CAPS_SD_SDR104 (1 << 1)
+#define EXTRA_CAPS_SD_DDR50 (1 << 2)
+#define EXTRA_CAPS_MMC_HSDDR (1 << 3)
+#define EXTRA_CAPS_MMC_HS200 (1 << 4)
+#define EXTRA_CAPS_MMC_8BIT (1 << 5)
+ u32 extra_caps;
+
+#define IC_VER_A 0
+#define IC_VER_B 1
+#define IC_VER_C 2
+#define IC_VER_D 3
+ u8 ic_version;
+
+ const u32 *sd_pull_ctl_enable_tbl;
+ const u32 *sd_pull_ctl_disable_tbl;
+ const u32 *ms_pull_ctl_enable_tbl;
+ const u32 *ms_pull_ctl_disable_tbl;
+
+ const struct pcr_ops *ops;
+ enum PDEV_STAT state;
+
+ int num_slots;
+ struct rtsx_slot *slots;
+};
+
+#define CHK_PCI_PID(pcr, pid) ((pcr)->pci->device == (pid))
+#define PCI_VID(pcr) ((pcr)->pci->vendor)
+#define PCI_PID(pcr) ((pcr)->pci->device)
+
+void rtsx_pci_start_run(struct rtsx_pcr *pcr);
+int rtsx_pci_write_register(struct rtsx_pcr *pcr, u16 addr, u8 mask, u8 data);
+int rtsx_pci_read_register(struct rtsx_pcr *pcr, u16 addr, u8 *data);
+int rtsx_pci_write_phy_register(struct rtsx_pcr *pcr, u8 addr, u16 val);
+int rtsx_pci_read_phy_register(struct rtsx_pcr *pcr, u8 addr, u16 *val);
+void rtsx_pci_stop_cmd(struct rtsx_pcr *pcr);
+void rtsx_pci_add_cmd(struct rtsx_pcr *pcr,
+ u8 cmd_type, u16 reg_addr, u8 mask, u8 data);
+void rtsx_pci_send_cmd_no_wait(struct rtsx_pcr *pcr);
+int rtsx_pci_send_cmd(struct rtsx_pcr *pcr, int timeout);
+int rtsx_pci_transfer_data(struct rtsx_pcr *pcr, struct scatterlist *sglist,
+ int num_sg, bool read, int timeout);
+int rtsx_pci_read_ppbuf(struct rtsx_pcr *pcr, u8 *buf, int buf_len);
+int rtsx_pci_write_ppbuf(struct rtsx_pcr *pcr, u8 *buf, int buf_len);
+int rtsx_pci_card_pull_ctl_enable(struct rtsx_pcr *pcr, int card);
+int rtsx_pci_card_pull_ctl_disable(struct rtsx_pcr *pcr, int card);
+int rtsx_pci_switch_clock(struct rtsx_pcr *pcr, unsigned int card_clock,
+ u8 ssc_depth, bool initial_mode, bool double_clk, bool vpclk);
+int rtsx_pci_card_power_on(struct rtsx_pcr *pcr, int card);
+int rtsx_pci_card_power_off(struct rtsx_pcr *pcr, int card);
+unsigned int rtsx_pci_card_exist(struct rtsx_pcr *pcr);
+void rtsx_pci_complete_unfinished_transfer(struct rtsx_pcr *pcr);
+
+static inline u8 *rtsx_pci_get_cmd_data(struct rtsx_pcr *pcr)
+{
+ return (u8 *)(pcr->host_cmds_ptr);
+}
+
+#endif
diff --git a/include/linux/mman.h b/include/linux/mman.h
index d09dde1..9aa863d 100644
--- a/include/linux/mman.h
+++ b/include/linux/mman.h
@@ -11,6 +11,8 @@
extern int sysctl_overcommit_ratio;
extern struct percpu_counter vm_committed_as;
+unsigned long vm_memory_committed(void);
+
static inline void vm_acct_memory(long pages)
{
percpu_counter_add(&vm_committed_as, pages);
diff --git a/include/linux/pci.h b/include/linux/pci.h
index ee21795..d03d246 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -588,7 +588,7 @@
* in a generic manner.
*/
#define DEFINE_PCI_DEVICE_TABLE(_table) \
- const struct pci_device_id _table[] __devinitconst
+ const struct pci_device_id _table[]
/**
* PCI_DEVICE - macro used to describe a specific pci device
@@ -686,7 +686,7 @@
int pci_bus_insert_busn_res(struct pci_bus *b, int bus, int busmax);
int pci_bus_update_busn_res_end(struct pci_bus *b, int busmax);
void pci_bus_release_busn_res(struct pci_bus *b);
-struct pci_bus * __devinit pci_scan_root_bus(struct device *parent, int bus,
+struct pci_bus *pci_scan_root_bus(struct device *parent, int bus,
struct pci_ops *ops, void *sysdata,
struct list_head *resources);
struct pci_bus *pci_add_new_bus(struct pci_bus *parent, struct pci_dev *dev,
@@ -941,10 +941,8 @@
/* Functions for PCI Hotplug drivers to use */
int pci_bus_find_capability(struct pci_bus *bus, unsigned int devfn, int cap);
-#ifdef CONFIG_HOTPLUG
unsigned int pci_rescan_bus_bridge_resize(struct pci_dev *bridge);
unsigned int pci_rescan_bus(struct pci_bus *bus);
-#endif
/* Vital product data routines */
ssize_t pci_read_vpd(struct pci_dev *dev, loff_t pos, size_t count, void *buf);
@@ -1580,7 +1578,7 @@
extern unsigned long pci_cardbus_io_size;
extern unsigned long pci_cardbus_mem_size;
-extern u8 __devinitdata pci_dfl_cache_line_size;
+extern u8 pci_dfl_cache_line_size;
extern u8 pci_cache_line_size;
extern unsigned long pci_hotplug_io_size;
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 9d36b82..0f84473 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -1985,6 +1985,9 @@
#define PCI_DEVICE_ID_EXAR_XR17C152 0x0152
#define PCI_DEVICE_ID_EXAR_XR17C154 0x0154
#define PCI_DEVICE_ID_EXAR_XR17C158 0x0158
+#define PCI_DEVICE_ID_EXAR_XR17V352 0x0352
+#define PCI_DEVICE_ID_EXAR_XR17V354 0x0354
+#define PCI_DEVICE_ID_EXAR_XR17V358 0x0358
#define PCI_VENDOR_ID_MICROGATE 0x13c0
#define PCI_DEVICE_ID_MICROGATE_USC 0x0010
@@ -2323,6 +2326,8 @@
#define PCI_VENDOR_ID_TOPSPIN 0x1867
+#define PCI_VENDOR_ID_COMMTECH 0x18f7
+
#define PCI_VENDOR_ID_SILAN 0x1904
#define PCI_VENDOR_ID_RENESAS 0x1912
diff --git a/include/linux/platform_data/ad5449.h b/include/linux/platform_data/ad5449.h
new file mode 100644
index 0000000..bd712bd
--- /dev/null
+++ b/include/linux/platform_data/ad5449.h
@@ -0,0 +1,40 @@
+/*
+ * AD5415, AD5426, AD5429, AD5432, AD5439, AD5443, AD5449 Digital to Analog
+ * Converter driver.
+ *
+ * Copyright 2012 Analog Devices Inc.
+ * Author: Lars-Peter Clausen <lars@metafoo.de>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#ifndef __LINUX_PLATFORM_DATA_AD5449_H__
+#define __LINUX_PLATFORM_DATA_AD5449_H__
+
+/**
+ * enum ad5449_sdo_mode - AD5449 SDO pin configuration
+ * @AD5449_SDO_DRIVE_FULL: Drive the SDO pin with full strength.
+ * @AD5449_SDO_DRIVE_WEAK: Drive the SDO pin with not full strength.
+ * @AD5449_SDO_OPEN_DRAIN: Operate the SDO pin in open-drain mode.
+ * @AD5449_SDO_DISABLED: Disable the SDO pin, in this mode it is not possible to
+ * read back from the device.
+ */
+enum ad5449_sdo_mode {
+ AD5449_SDO_DRIVE_FULL = 0x0,
+ AD5449_SDO_DRIVE_WEAK = 0x1,
+ AD5449_SDO_OPEN_DRAIN = 0x2,
+ AD5449_SDO_DISABLED = 0x3,
+};
+
+/**
+ * struct ad5449_platform_data - Platform data for the ad5449 DAC driver
+ * @sdo_mode: SDO pin mode
+ * @hardware_clear_to_midscale: Whether asserting the hardware CLR pin sets the
+ * outputs to midscale (true) or to zero scale(false).
+ */
+struct ad5449_platform_data {
+ enum ad5449_sdo_mode sdo_mode;
+ bool hardware_clear_to_midscale;
+};
+
+#endif
diff --git a/include/linux/platform_data/ad7298.h b/include/linux/platform_data/ad7298.h
new file mode 100644
index 0000000..fbf8adf
--- /dev/null
+++ b/include/linux/platform_data/ad7298.h
@@ -0,0 +1,20 @@
+/*
+ * AD7298 SPI ADC driver
+ *
+ * Copyright 2011 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2.
+ */
+
+#ifndef __LINUX_PLATFORM_DATA_AD7298_H__
+#define __LINUX_PLATFORM_DATA_AD7298_H__
+
+/**
+ * struct ad7298_platform_data - Platform data for the ad7298 ADC driver
+ * @ext_ref: Whether to use an external reference voltage.
+ **/
+struct ad7298_platform_data {
+ bool ext_ref;
+};
+
+#endif /* IIO_ADC_AD7298_H_ */
diff --git a/include/linux/platform_data/ad7793.h b/include/linux/platform_data/ad7793.h
new file mode 100644
index 0000000..7ea6751
--- /dev/null
+++ b/include/linux/platform_data/ad7793.h
@@ -0,0 +1,112 @@
+/*
+ * AD7792/AD7793 SPI ADC driver
+ *
+ * Copyright 2011 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2.
+ */
+#ifndef __LINUX_PLATFORM_DATA_AD7793_H__
+#define __LINUX_PLATFORM_DATA_AD7793_H__
+
+/**
+ * enum ad7793_clock_source - AD7793 clock source selection
+ * @AD7793_CLK_SRC_INT: Internal 64 kHz clock, not available at the CLK pin.
+ * @AD7793_CLK_SRC_INT_CO: Internal 64 kHz clock, available at the CLK pin.
+ * @AD7793_CLK_SRC_EXT: Use external clock.
+ * @AD7793_CLK_SRC_EXT_DIV2: Use external clock divided by 2.
+ */
+enum ad7793_clock_source {
+ AD7793_CLK_SRC_INT,
+ AD7793_CLK_SRC_INT_CO,
+ AD7793_CLK_SRC_EXT,
+ AD7793_CLK_SRC_EXT_DIV2,
+};
+
+/**
+ * enum ad7793_bias_voltage - AD7793 bias voltage selection
+ * @AD7793_BIAS_VOLTAGE_DISABLED: Bias voltage generator disabled
+ * @AD7793_BIAS_VOLTAGE_AIN1: Bias voltage connected to AIN1(-).
+ * @AD7793_BIAS_VOLTAGE_AIN2: Bias voltage connected to AIN2(-).
+ * @AD7793_BIAS_VOLTAGE_AIN3: Bias voltage connected to AIN3(-).
+ * Only valid for AD7795/AD7796.
+ */
+enum ad7793_bias_voltage {
+ AD7793_BIAS_VOLTAGE_DISABLED,
+ AD7793_BIAS_VOLTAGE_AIN1,
+ AD7793_BIAS_VOLTAGE_AIN2,
+ AD7793_BIAS_VOLTAGE_AIN3,
+};
+
+/**
+ * enum ad7793_refsel - AD7793 reference voltage selection
+ * @AD7793_REFSEL_REFIN1: External reference applied between REFIN1(+)
+ * and REFIN1(-).
+ * @AD7793_REFSEL_REFIN2: External reference applied between REFIN2(+) and
+ * and REFIN1(-). Only valid for AD7795/AD7796.
+ * @AD7793_REFSEL_INTERNAL: Internal 1.17 V reference.
+ */
+enum ad7793_refsel {
+ AD7793_REFSEL_REFIN1 = 0,
+ AD7793_REFSEL_REFIN2 = 1,
+ AD7793_REFSEL_INTERNAL = 2,
+};
+
+/**
+ * enum ad7793_current_source_direction - AD7793 excitation current direction
+ * @AD7793_IEXEC1_IOUT1_IEXEC2_IOUT2: Current source IEXC1 connected to pin
+ * IOUT1, current source IEXC2 connected to pin IOUT2.
+ * @AD7793_IEXEC1_IOUT2_IEXEC2_IOUT1: Current source IEXC2 connected to pin
+ * IOUT1, current source IEXC1 connected to pin IOUT2.
+ * @AD7793_IEXEC1_IEXEC2_IOUT1: Both current sources connected to pin IOUT1.
+ * Only valid when the current sources are set to 10 uA or 210 uA.
+ * @AD7793_IEXEC1_IEXEC2_IOUT2: Both current sources connected to Pin IOUT2.
+ * Only valid when the current ources are set to 10 uA or 210 uA.
+ */
+enum ad7793_current_source_direction {
+ AD7793_IEXEC1_IOUT1_IEXEC2_IOUT2 = 0,
+ AD7793_IEXEC1_IOUT2_IEXEC2_IOUT1 = 1,
+ AD7793_IEXEC1_IEXEC2_IOUT1 = 2,
+ AD7793_IEXEC1_IEXEC2_IOUT2 = 3,
+};
+
+/**
+ * enum ad7793_excitation_current - AD7793 excitation current selection
+ * @AD7793_IX_DISABLED: Excitation current Disabled.
+ * @AD7793_IX_10uA: Enable 10 micro-ampere excitation current.
+ * @AD7793_IX_210uA: Enable 210 micro-ampere excitation current.
+ * @AD7793_IX_1mA: Enable 1 milli-Ampere excitation current.
+ */
+enum ad7793_excitation_current {
+ AD7793_IX_DISABLED = 0,
+ AD7793_IX_10uA = 1,
+ AD7793_IX_210uA = 2,
+ AD7793_IX_1mA = 3,
+};
+
+/**
+ * struct ad7793_platform_data - AD7793 platform data
+ * @clock_src: Clock source selection
+ * @burnout_current: If set to true the 100nA burnout current is enabled.
+ * @boost_enable: Enable boost for the bias voltage generator.
+ * @buffered: If set to true configure the device for buffered input mode.
+ * @unipolar: If set to true sample in unipolar mode, if set to false sample in
+ * bipolar mode.
+ * @refsel: Reference voltage selection
+ * @bias_voltage: Bias voltage selection
+ * @exitation_current: Excitation current selection
+ * @current_source_direction: Excitation current direction selection
+ */
+struct ad7793_platform_data {
+ enum ad7793_clock_source clock_src;
+ bool burnout_current;
+ bool boost_enable;
+ bool buffered;
+ bool unipolar;
+
+ enum ad7793_refsel refsel;
+ enum ad7793_bias_voltage bias_voltage;
+ enum ad7793_excitation_current exitation_current;
+ enum ad7793_current_source_direction current_source_direction;
+};
+
+#endif /* IIO_ADC_AD7793_H_ */
diff --git a/include/linux/platform_data/ad7887.h b/include/linux/platform_data/ad7887.h
new file mode 100644
index 0000000..1e06eac
--- /dev/null
+++ b/include/linux/platform_data/ad7887.h
@@ -0,0 +1,26 @@
+/*
+ * AD7887 SPI ADC driver
+ *
+ * Copyright 2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+#ifndef IIO_ADC_AD7887_H_
+#define IIO_ADC_AD7887_H_
+
+/**
+ * struct ad7887_platform_data - AD7887 ADC driver platform data
+ * @en_dual: Whether to use dual channel mode. If set to true AIN1 becomes the
+ * second input channel, and Vref is internally connected to Vdd. If set to
+ * false the device is used in single channel mode and AIN1/Vref is used as
+ * VREF input.
+ * @use_onchip_ref: Whether to use the onchip reference. If set to true the
+ * internal 2.5V reference is used. If set to false a external reference is
+ * used.
+ */
+struct ad7887_platform_data {
+ bool en_dual;
+ bool use_onchip_ref;
+};
+
+#endif /* IIO_ADC_AD7887_H_ */
diff --git a/include/linux/platform_data/gpio-ts5500.h b/include/linux/platform_data/gpio-ts5500.h
new file mode 100644
index 0000000..b10d11c
--- /dev/null
+++ b/include/linux/platform_data/gpio-ts5500.h
@@ -0,0 +1,27 @@
+/*
+ * GPIO (DIO) header for Technologic Systems TS-5500
+ *
+ * Copyright (c) 2012 Savoir-faire Linux Inc.
+ * Vivien Didelot <vivien.didelot@savoirfairelinux.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _PDATA_GPIO_TS5500_H
+#define _PDATA_GPIO_TS5500_H
+
+/**
+ * struct ts5500_dio_platform_data - TS-5500 pin block configuration
+ * @base: The GPIO base number to use.
+ * @strap: The only pin connected to an interrupt in a block is input-only.
+ * If you need a bidirectional line which can trigger an IRQ, you
+ * may strap it with an in/out pin. This flag indicates this case.
+ */
+struct ts5500_dio_platform_data {
+ int base;
+ bool strap;
+};
+
+#endif /* _PDATA_GPIO_TS5500_H */
diff --git a/include/linux/platform_data/omap_drm.h b/include/linux/platform_data/omap_drm.h
index 3da73bdc..f4e4a23 100644
--- a/include/linux/platform_data/omap_drm.h
+++ b/include/linux/platform_data/omap_drm.h
@@ -46,6 +46,7 @@
};
struct omap_drm_platform_data {
+ uint32_t omaprev;
struct omap_kms_platform_data *kms_pdata;
};
diff --git a/include/linux/platform_data/uio_dmem_genirq.h b/include/linux/platform_data/uio_dmem_genirq.h
new file mode 100644
index 0000000..973c1bb
--- /dev/null
+++ b/include/linux/platform_data/uio_dmem_genirq.h
@@ -0,0 +1,26 @@
+/*
+ * include/linux/platform_data/uio_dmem_genirq.h
+ *
+ * Copyright (C) 2012 Damian Hobson-Garcia
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _UIO_DMEM_GENIRQ_H
+#define _UIO_DMEM_GENIRQ_H
+
+#include <linux/uio_driver.h>
+
+struct uio_dmem_genirq_pdata {
+ struct uio_info uioinfo;
+ unsigned int *dynamic_region_sizes;
+ unsigned int num_dynamic_regions;
+};
+#endif /* _UIO_DMEM_GENIRQ_H */
diff --git a/include/linux/platform_device.h b/include/linux/platform_device.h
index 5711e95..a9ded9a 100644
--- a/include/linux/platform_device.h
+++ b/include/linux/platform_device.h
@@ -55,6 +55,7 @@
struct platform_device_info {
struct device *parent;
+ struct acpi_dev_node acpi_node;
const char *name;
int id;
diff --git a/include/linux/pm.h b/include/linux/pm.h
index 007e687..03d7bb1 100644
--- a/include/linux/pm.h
+++ b/include/linux/pm.h
@@ -546,10 +546,9 @@
unsigned long active_jiffies;
unsigned long suspended_jiffies;
unsigned long accounting_timestamp;
- struct dev_pm_qos_request *pq_req;
#endif
struct pm_subsys_data *subsys_data; /* Owned by the subsystem. */
- struct pm_qos_constraints *constraints;
+ struct dev_pm_qos *qos;
};
extern void update_pm_runtime_accounting(struct device *dev);
diff --git a/include/linux/pm_qos.h b/include/linux/pm_qos.h
index 9924ea1..5a95013 100644
--- a/include/linux/pm_qos.h
+++ b/include/linux/pm_qos.h
@@ -20,6 +20,13 @@
PM_QOS_NUM_CLASSES,
};
+enum pm_qos_flags_status {
+ PM_QOS_FLAGS_UNDEFINED = -1,
+ PM_QOS_FLAGS_NONE,
+ PM_QOS_FLAGS_SOME,
+ PM_QOS_FLAGS_ALL,
+};
+
#define PM_QOS_DEFAULT_VALUE -1
#define PM_QOS_CPU_DMA_LAT_DEFAULT_VALUE (2000 * USEC_PER_SEC)
@@ -27,14 +34,31 @@
#define PM_QOS_NETWORK_THROUGHPUT_DEFAULT_VALUE 0
#define PM_QOS_DEV_LAT_DEFAULT_VALUE 0
+#define PM_QOS_FLAG_NO_POWER_OFF (1 << 0)
+#define PM_QOS_FLAG_REMOTE_WAKEUP (1 << 1)
+
struct pm_qos_request {
struct plist_node node;
int pm_qos_class;
struct delayed_work work; /* for pm_qos_update_request_timeout */
};
+struct pm_qos_flags_request {
+ struct list_head node;
+ s32 flags; /* Do not change to 64 bit */
+};
+
+enum dev_pm_qos_req_type {
+ DEV_PM_QOS_LATENCY = 1,
+ DEV_PM_QOS_FLAGS,
+};
+
struct dev_pm_qos_request {
- struct plist_node node;
+ enum dev_pm_qos_req_type type;
+ union {
+ struct plist_node pnode;
+ struct pm_qos_flags_request flr;
+ } data;
struct device *dev;
};
@@ -45,8 +69,8 @@
};
/*
- * Note: The lockless read path depends on the CPU accessing
- * target_value atomically. Atomic access is only guaranteed on all CPU
+ * Note: The lockless read path depends on the CPU accessing target_value
+ * or effective_flags atomically. Atomic access is only guaranteed on all CPU
* types linux supports for 32 bit quantites
*/
struct pm_qos_constraints {
@@ -57,6 +81,18 @@
struct blocking_notifier_head *notifiers;
};
+struct pm_qos_flags {
+ struct list_head list;
+ s32 effective_flags; /* Do not change to 64 bit */
+};
+
+struct dev_pm_qos {
+ struct pm_qos_constraints latency;
+ struct pm_qos_flags flags;
+ struct dev_pm_qos_request *latency_req;
+ struct dev_pm_qos_request *flags_req;
+};
+
/* Action requested to pm_qos_update_target */
enum pm_qos_req_action {
PM_QOS_ADD_REQ, /* Add a new request */
@@ -71,6 +107,9 @@
int pm_qos_update_target(struct pm_qos_constraints *c, struct plist_node *node,
enum pm_qos_req_action action, int value);
+bool pm_qos_update_flags(struct pm_qos_flags *pqf,
+ struct pm_qos_flags_request *req,
+ enum pm_qos_req_action action, s32 val);
void pm_qos_add_request(struct pm_qos_request *req, int pm_qos_class,
s32 value);
void pm_qos_update_request(struct pm_qos_request *req,
@@ -86,10 +125,12 @@
s32 pm_qos_read_value(struct pm_qos_constraints *c);
#ifdef CONFIG_PM
+enum pm_qos_flags_status __dev_pm_qos_flags(struct device *dev, s32 mask);
+enum pm_qos_flags_status dev_pm_qos_flags(struct device *dev, s32 mask);
s32 __dev_pm_qos_read_value(struct device *dev);
s32 dev_pm_qos_read_value(struct device *dev);
int dev_pm_qos_add_request(struct device *dev, struct dev_pm_qos_request *req,
- s32 value);
+ enum dev_pm_qos_req_type type, s32 value);
int dev_pm_qos_update_request(struct dev_pm_qos_request *req, s32 new_value);
int dev_pm_qos_remove_request(struct dev_pm_qos_request *req);
int dev_pm_qos_add_notifier(struct device *dev,
@@ -103,12 +144,19 @@
int dev_pm_qos_add_ancestor_request(struct device *dev,
struct dev_pm_qos_request *req, s32 value);
#else
+static inline enum pm_qos_flags_status __dev_pm_qos_flags(struct device *dev,
+ s32 mask)
+ { return PM_QOS_FLAGS_UNDEFINED; }
+static inline enum pm_qos_flags_status dev_pm_qos_flags(struct device *dev,
+ s32 mask)
+ { return PM_QOS_FLAGS_UNDEFINED; }
static inline s32 __dev_pm_qos_read_value(struct device *dev)
{ return 0; }
static inline s32 dev_pm_qos_read_value(struct device *dev)
{ return 0; }
static inline int dev_pm_qos_add_request(struct device *dev,
struct dev_pm_qos_request *req,
+ enum dev_pm_qos_req_type type,
s32 value)
{ return 0; }
static inline int dev_pm_qos_update_request(struct dev_pm_qos_request *req,
@@ -144,10 +192,31 @@
#ifdef CONFIG_PM_RUNTIME
int dev_pm_qos_expose_latency_limit(struct device *dev, s32 value);
void dev_pm_qos_hide_latency_limit(struct device *dev);
+int dev_pm_qos_expose_flags(struct device *dev, s32 value);
+void dev_pm_qos_hide_flags(struct device *dev);
+int dev_pm_qos_update_flags(struct device *dev, s32 mask, bool set);
+
+static inline s32 dev_pm_qos_requested_latency(struct device *dev)
+{
+ return dev->power.qos->latency_req->data.pnode.prio;
+}
+
+static inline s32 dev_pm_qos_requested_flags(struct device *dev)
+{
+ return dev->power.qos->flags_req->data.flr.flags;
+}
#else
static inline int dev_pm_qos_expose_latency_limit(struct device *dev, s32 value)
{ return 0; }
static inline void dev_pm_qos_hide_latency_limit(struct device *dev) {}
+static inline int dev_pm_qos_expose_flags(struct device *dev, s32 value)
+ { return 0; }
+static inline void dev_pm_qos_hide_flags(struct device *dev) {}
+static inline int dev_pm_qos_update_flags(struct device *dev, s32 m, bool set)
+ { return 0; }
+
+static inline s32 dev_pm_qos_requested_latency(struct device *dev) { return 0; }
+static inline s32 dev_pm_qos_requested_flags(struct device *dev) { return 0; }
#endif
#endif
diff --git a/include/linux/serial_8250.h b/include/linux/serial_8250.h
index c174c90..c490d20 100644
--- a/include/linux/serial_8250.h
+++ b/include/linux/serial_8250.h
@@ -105,6 +105,8 @@
extern int serial8250_find_port(struct uart_port *p);
extern int serial8250_find_port_for_earlycon(void);
+extern unsigned int serial8250_early_in(struct uart_port *port, int offset);
+extern void serial8250_early_out(struct uart_port *port, int offset, int value);
extern int setup_early_serial8250_console(char *cmdline);
extern void serial8250_do_set_termios(struct uart_port *port,
struct ktermios *termios, struct ktermios *old);
diff --git a/include/linux/tick.h b/include/linux/tick.h
index f37fceb..1a6567b 100644
--- a/include/linux/tick.h
+++ b/include/linux/tick.h
@@ -142,4 +142,10 @@
static inline u64 get_cpu_iowait_time_us(int cpu, u64 *unused) { return -1; }
# endif /* !NO_HZ */
+# ifdef CONFIG_CPU_IDLE_GOV_MENU
+extern void menu_hrtimer_cancel(void);
+# else
+static inline void menu_hrtimer_cancel(void) {}
+# endif /* CONFIG_CPU_IDLE_GOV_MENU */
+
#endif
diff --git a/include/linux/tty.h b/include/linux/tty.h
index f0b4eb4..8db1b56 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -188,7 +188,9 @@
};
struct tty_port {
+ struct tty_bufhead buf; /* Locked internally */
struct tty_struct *tty; /* Back pointer */
+ struct tty_struct *itty; /* internal back ptr */
const struct tty_port_operations *ops; /* Port operations */
spinlock_t lock; /* Lock protecting tty field */
int blocked_open; /* Waiting to open */
@@ -197,6 +199,9 @@
wait_queue_head_t close_wait; /* Close waiters */
wait_queue_head_t delta_msr_wait; /* Modem status change */
unsigned long flags; /* TTY flags ASY_*/
+ unsigned long iflags; /* TTYP_ internal flags */
+#define TTYP_FLUSHING 1 /* Flushing to ldisc in progress */
+#define TTYP_FLUSHPENDING 2 /* Queued buffer flush pending */
unsigned char console:1; /* port is a console */
struct mutex mutex; /* Locking */
struct mutex buf_mutex; /* Buffer alloc lock */
@@ -235,6 +240,7 @@
struct mutex ldisc_mutex;
struct tty_ldisc *ldisc;
+ struct mutex atomic_write_lock;
struct mutex legacy_mutex;
struct mutex termios_mutex;
spinlock_t ctrl_lock;
@@ -254,7 +260,6 @@
struct tty_struct *link;
struct fasync_struct *fasync;
- struct tty_bufhead buf; /* Locked internally */
int alt_speed; /* For magic substitution of 38400 bps */
wait_queue_head_t write_wait;
wait_queue_head_t read_wait;
@@ -265,37 +270,10 @@
#define N_TTY_BUF_SIZE 4096
- /*
- * The following is data for the N_TTY line discipline. For
- * historical reasons, this is included in the tty structure.
- * Mostly locked by the BKL.
- */
- unsigned int column;
- unsigned char lnext:1, erasing:1, raw:1, real_raw:1, icanon:1;
unsigned char closing:1;
- unsigned char echo_overrun:1;
unsigned short minimum_to_wake;
- unsigned long overrun_time;
- int num_overrun;
- unsigned long process_char_map[256/(8*sizeof(unsigned long))];
- char *read_buf;
- int read_head;
- int read_tail;
- int read_cnt;
- unsigned long read_flags[N_TTY_BUF_SIZE/(8*sizeof(unsigned long))];
- unsigned char *echo_buf;
- unsigned int echo_pos;
- unsigned int echo_cnt;
- int canon_data;
- unsigned long canon_head;
- unsigned int canon_column;
- struct mutex atomic_read_lock;
- struct mutex atomic_write_lock;
- struct mutex output_lock;
- struct mutex echo_lock;
unsigned char *write_buf;
int write_cnt;
- spinlock_t read_lock;
/* If the tty has a pending do_SAK, queue it here - akpm */
struct work_struct SAK_work;
struct tty_port *port;
@@ -335,8 +313,6 @@
#define TTY_PTY_LOCK 16 /* pty private */
#define TTY_NO_WRITE_SPLIT 17 /* Preserve write boundaries to driver */
#define TTY_HUPPED 18 /* Post driver->hangup() */
-#define TTY_FLUSHING 19 /* Flushing to ldisc in progress */
-#define TTY_FLUSHPENDING 20 /* Queued buffer flush pending */
#define TTY_HUPPING 21 /* ->hangup() in progress */
#define TTY_WRITE_FLUSH(tty) tty_write_flush((tty))
@@ -412,9 +388,9 @@
extern void no_tty(void);
extern void tty_flip_buffer_push(struct tty_struct *tty);
extern void tty_flush_to_ldisc(struct tty_struct *tty);
-extern void tty_buffer_free_all(struct tty_struct *tty);
+extern void tty_buffer_free_all(struct tty_port *port);
extern void tty_buffer_flush(struct tty_struct *tty);
-extern void tty_buffer_init(struct tty_struct *tty);
+extern void tty_buffer_init(struct tty_port *port);
extern speed_t tty_get_baud_rate(struct tty_struct *tty);
extern speed_t tty_termios_baud_rate(struct ktermios *termios);
extern speed_t tty_termios_input_baud_rate(struct ktermios *termios);
@@ -479,6 +455,7 @@
const struct attribute_group **attr_grp);
extern int tty_port_alloc_xmit_buf(struct tty_port *port);
extern void tty_port_free_xmit_buf(struct tty_port *port);
+extern void tty_port_destroy(struct tty_port *port);
extern void tty_port_put(struct tty_port *port);
static inline struct tty_port *tty_port_get(struct tty_port *port)
@@ -535,7 +512,7 @@
/* tty_audit.c */
#ifdef CONFIG_AUDIT
extern void tty_audit_add_data(struct tty_struct *tty, unsigned char *data,
- size_t size);
+ size_t size, unsigned icanon);
extern void tty_audit_exit(void);
extern void tty_audit_fork(struct signal_struct *sig);
extern void tty_audit_tiocsti(struct tty_struct *tty, char ch);
@@ -544,7 +521,7 @@
kuid_t loginuid, u32 sessionid);
#else
static inline void tty_audit_add_data(struct tty_struct *tty,
- unsigned char *data, size_t size)
+ unsigned char *data, size_t size, unsigned icanon)
{
}
static inline void tty_audit_tiocsti(struct tty_struct *tty, char ch)
diff --git a/include/linux/tty_flip.h b/include/linux/tty_flip.h
index 9239d03..2002344 100644
--- a/include/linux/tty_flip.h
+++ b/include/linux/tty_flip.h
@@ -11,7 +11,7 @@
static inline int tty_insert_flip_char(struct tty_struct *tty,
unsigned char ch, char flag)
{
- struct tty_buffer *tb = tty->buf.tail;
+ struct tty_buffer *tb = tty->port->buf.tail;
if (tb && tb->used < tb->size) {
tb->flag_buf_ptr[tb->used] = flag;
tb->char_buf_ptr[tb->used++] = ch;
diff --git a/include/linux/usb.h b/include/linux/usb.h
index 10278d1..689b14b 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -482,6 +482,7 @@
* @connect_time: time device was first connected
* @do_remote_wakeup: remote wakeup should be enabled
* @reset_resume: needs reset instead of resume
+ * @port_is_suspended: the upstream port is suspended (L2 or U3)
* @wusb_dev: if this is a Wireless USB device, link to the WUSB
* specific data for the device.
* @slot_id: Slot ID assigned by xHCI
@@ -560,6 +561,7 @@
unsigned do_remote_wakeup:1;
unsigned reset_resume:1;
+ unsigned port_is_suspended:1;
#endif
struct wusb_dev *wusb_dev;
int slot_id;
@@ -588,8 +590,9 @@
*/
#define usb_hub_for_each_child(hdev, port1, child) \
for (port1 = 1, child = usb_hub_find_child(hdev, port1); \
- port1 <= hdev->maxchild; \
- child = usb_hub_find_child(hdev, ++port1))
+ port1 <= hdev->maxchild; \
+ child = usb_hub_find_child(hdev, ++port1)) \
+ if (!child) continue; else
/* USB device locking */
#define usb_lock_device(udev) device_lock(&(udev)->dev)
@@ -805,6 +808,22 @@
.bcdDevice_hi = (hi)
/**
+ * USB_DEVICE_INTERFACE_CLASS - describe a usb device with a specific interface class
+ * @vend: the 16 bit USB Vendor ID
+ * @prod: the 16 bit USB Product ID
+ * @cl: bInterfaceClass value
+ *
+ * This macro is used to create a struct usb_device_id that matches a
+ * specific interface class of devices.
+ */
+#define USB_DEVICE_INTERFACE_CLASS(vend, prod, cl) \
+ .match_flags = USB_DEVICE_ID_MATCH_DEVICE | \
+ USB_DEVICE_ID_MATCH_INT_CLASS, \
+ .idVendor = (vend), \
+ .idProduct = (prod), \
+ .bInterfaceClass = (cl)
+
+/**
* USB_DEVICE_INTERFACE_PROTOCOL - describe a usb device with a specific interface protocol
* @vend: the 16 bit USB Vendor ID
* @prod: the 16 bit USB Product ID
@@ -1129,8 +1148,8 @@
* Note: URB_DIR_IN/OUT is automatically set in usb_submit_urb().
*/
#define URB_SHORT_NOT_OK 0x0001 /* report short reads as errors */
-#define URB_ISO_ASAP 0x0002 /* iso-only, urb->start_frame
- * ignored */
+#define URB_ISO_ASAP 0x0002 /* iso-only; use the first unexpired
+ * slot in the schedule */
#define URB_NO_TRANSFER_DMA_MAP 0x0004 /* urb->transfer_dma valid on submit */
#define URB_NO_FSBR 0x0020 /* UHCI-specific */
#define URB_ZERO_PACKET 0x0040 /* Finish bulk OUT with short packet */
@@ -1309,15 +1328,20 @@
* the transfer interval in the endpoint descriptor is logarithmic.
* Device drivers must convert that value to linear units themselves.)
*
- * Isochronous URBs normally use the URB_ISO_ASAP transfer flag, telling
- * the host controller to schedule the transfer as soon as bandwidth
- * utilization allows, and then set start_frame to reflect the actual frame
- * selected during submission. Otherwise drivers must specify the start_frame
- * and handle the case where the transfer can't begin then. However, drivers
- * won't know how bandwidth is currently allocated, and while they can
- * find the current frame using usb_get_current_frame_number () they can't
- * know the range for that frame number. (Ranges for frame counter values
- * are HC-specific, and can go from 256 to 65536 frames from "now".)
+ * If an isochronous endpoint queue isn't already running, the host
+ * controller will schedule a new URB to start as soon as bandwidth
+ * utilization allows. If the queue is running then a new URB will be
+ * scheduled to start in the first transfer slot following the end of the
+ * preceding URB, if that slot has not already expired. If the slot has
+ * expired (which can happen when IRQ delivery is delayed for a long time),
+ * the scheduling behavior depends on the URB_ISO_ASAP flag. If the flag
+ * is clear then the URB will be scheduled to start in the expired slot,
+ * implying that some of its packets will not be transferred; if the flag
+ * is set then the URB will be scheduled in the first unexpired slot,
+ * breaking the queue's synchronization. Upon URB completion, the
+ * start_frame field will be set to the (micro)frame number in which the
+ * transfer was scheduled. Ranges for frame counter values are HC-specific
+ * and can go from as low as 256 to as high as 65536 frames.
*
* Isochronous URBs have a different data transfer model, in part because
* the quality of service is only "best effort". Callers provide specially
diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h
index f8dda06..b09c37e 100644
--- a/include/linux/usb/composite.h
+++ b/include/linux/usb/composite.h
@@ -38,6 +38,7 @@
#include <linux/version.h>
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
+#include <linux/log2.h>
/*
* USB function drivers should return USB_GADGET_DELAYED_STATUS if they
@@ -51,6 +52,7 @@
/* big enough to hold our biggest descriptor */
#define USB_COMP_EP0_BUFSIZ 1024
+#define USB_MS_TO_HS_INTERVAL(x) (ilog2((x * 1000 / 125)) + 1)
struct usb_configuration;
/**
@@ -117,7 +119,7 @@
struct usb_function {
const char *name;
struct usb_gadget_strings **strings;
- struct usb_descriptor_header **descriptors;
+ struct usb_descriptor_header **fs_descriptors;
struct usb_descriptor_header **hs_descriptors;
struct usb_descriptor_header **ss_descriptors;
diff --git a/include/linux/usb/ehci_pdriver.h b/include/linux/usb/ehci_pdriver.h
index c9d09f8..99238b0 100644
--- a/include/linux/usb/ehci_pdriver.h
+++ b/include/linux/usb/ehci_pdriver.h
@@ -29,6 +29,8 @@
* initialization.
* @port_power_off: set to 1 if the controller needs to be powered down
* after initialization.
+ * @no_io_watchdog: set to 1 if the controller does not need the I/O
+ * watchdog to run.
*
* These are general configuration options for the EHCI controller. All of
* these options are activating more or less workarounds for some hardware.
@@ -39,8 +41,7 @@
unsigned has_synopsys_hc_bug:1;
unsigned big_endian_desc:1;
unsigned big_endian_mmio:1;
- unsigned port_power_on:1;
- unsigned port_power_off:1;
+ unsigned no_io_watchdog:1;
/* Turn on all power and clocks */
int (*power_on)(struct platform_device *pdev);
diff --git a/include/linux/usb/ezusb.h b/include/linux/usb/ezusb.h
index fc618d8..639ee45 100644
--- a/include/linux/usb/ezusb.h
+++ b/include/linux/usb/ezusb.h
@@ -1,16 +1,8 @@
#ifndef __EZUSB_H
#define __EZUSB_H
-
-extern int ezusb_writememory(struct usb_device *dev, int address,
- unsigned char *data, int length, __u8 bRequest);
-
extern int ezusb_fx1_set_reset(struct usb_device *dev, unsigned char reset_bit);
-extern int ezusb_fx2_set_reset(struct usb_device *dev, unsigned char reset_bit);
-
extern int ezusb_fx1_ihex_firmware_download(struct usb_device *dev,
const char *firmware_path);
-extern int ezusb_fx2_ihex_firmware_download(struct usb_device *dev,
- const char *firmware_path);
#endif /* __EZUSB_H */
diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h
index 5b6e508..0af6569 100644
--- a/include/linux/usb/gadget.h
+++ b/include/linux/usb/gadget.h
@@ -939,6 +939,13 @@
kfree(v);
}
+struct usb_function;
+int usb_assign_descriptors(struct usb_function *f,
+ struct usb_descriptor_header **fs,
+ struct usb_descriptor_header **hs,
+ struct usb_descriptor_header **ss);
+void usb_free_all_descriptors(struct usb_function *f);
+
/*-------------------------------------------------------------------------*/
/* utility to simplify map/unmap of usb_requests to/from DMA */
diff --git a/include/linux/usb/ohci_pdriver.h b/include/linux/usb/ohci_pdriver.h
index 74e7755..012f2b7 100644
--- a/include/linux/usb/ohci_pdriver.h
+++ b/include/linux/usb/ohci_pdriver.h
@@ -25,6 +25,7 @@
* @big_endian_desc: BE descriptors
* @big_endian_mmio: BE registers
* @no_big_frame_no: no big endian frame_no shift
+ * @num_ports: number of ports
*
* These are general configuration options for the OHCI controller. All of
* these options are activating more or less workarounds for some hardware.
@@ -33,6 +34,7 @@
unsigned big_endian_desc:1;
unsigned big_endian_mmio:1;
unsigned no_big_frame_no:1;
+ unsigned int num_ports;
/* Turn on all power and clocks */
int (*power_on)(struct platform_device *pdev);
diff --git a/include/linux/usb/phy.h b/include/linux/usb/phy.h
index 06b5bae..a29ae1e 100644
--- a/include/linux/usb/phy.h
+++ b/include/linux/usb/phy.h
@@ -10,6 +10,7 @@
#define __LINUX_USB_PHY_H
#include <linux/notifier.h>
+#include <linux/usb.h>
enum usb_phy_events {
USB_EVENT_NONE, /* no events or cable disconnected */
@@ -99,8 +100,10 @@
int suspend);
/* notify phy connect status change */
- int (*notify_connect)(struct usb_phy *x, int port);
- int (*notify_disconnect)(struct usb_phy *x, int port);
+ int (*notify_connect)(struct usb_phy *x,
+ enum usb_device_speed speed);
+ int (*notify_disconnect)(struct usb_phy *x,
+ enum usb_device_speed speed);
};
@@ -189,19 +192,19 @@
}
static inline int
-usb_phy_notify_connect(struct usb_phy *x, int port)
+usb_phy_notify_connect(struct usb_phy *x, enum usb_device_speed speed)
{
if (x->notify_connect)
- return x->notify_connect(x, port);
+ return x->notify_connect(x, speed);
else
return 0;
}
static inline int
-usb_phy_notify_disconnect(struct usb_phy *x, int port)
+usb_phy_notify_disconnect(struct usb_phy *x, enum usb_device_speed speed)
{
if (x->notify_disconnect)
- return x->notify_disconnect(x, port);
+ return x->notify_disconnect(x, speed);
else
return 0;
}
diff --git a/include/uapi/asm-generic/ioctls.h b/include/uapi/asm-generic/ioctls.h
index 199975f..143dacb 100644
--- a/include/uapi/asm-generic/ioctls.h
+++ b/include/uapi/asm-generic/ioctls.h
@@ -74,6 +74,9 @@
#define TCSETXW 0x5435
#define TIOCSIG _IOW('T', 0x36, int) /* pty: generate signal */
#define TIOCVHANGUP 0x5437
+#define TIOCGPKT _IOR('T', 0x38, int) /* Get packet mode state */
+#define TIOCGPTLCK _IOR('T', 0x39, int) /* Get Pty lock state */
+#define TIOCGEXCL _IOR('T', 0x40, int) /* Get exclusive mode state */
#define FIONCLEX 0x5450
#define FIOCLEX 0x5451
diff --git a/include/uapi/linux/serial_core.h b/include/uapi/linux/serial_core.h
index 7e1ab20..78f99d9 100644
--- a/include/uapi/linux/serial_core.h
+++ b/include/uapi/linux/serial_core.h
@@ -49,7 +49,8 @@
#define PORT_XR17D15X 21 /* Exar XR17D15x UART */
#define PORT_LPC3220 22 /* NXP LPC32xx SoC "Standard" UART */
#define PORT_8250_CIR 23 /* CIR infrared port, has its own driver */
-#define PORT_MAX_8250 23 /* max port ID */
+#define PORT_XR17V35X 24 /* Exar XR17V35x UARTs */
+#define PORT_MAX_8250 24 /* max port ID */
/*
* ARM specific type numbers. These are not currently guaranteed
@@ -215,5 +216,7 @@
/* Energy Micro efm32 SoC */
#define PORT_EFMUART 100
+/* ARC (Synopsys) on-chip UART */
+#define PORT_ARC 101
#endif /* _UAPILINUX_SERIAL_CORE_H */
diff --git a/include/uapi/linux/serial_reg.h b/include/uapi/linux/serial_reg.h
index 5ed325e..e632260 100644
--- a/include/uapi/linux/serial_reg.h
+++ b/include/uapi/linux/serial_reg.h
@@ -367,5 +367,23 @@
#define UART_OMAP_MDR1_CIR_MODE 0x06 /* CIR mode */
#define UART_OMAP_MDR1_DISABLE 0x07 /* Disable (default state) */
+/*
+ * These are definitions for the Exar XR17V35X and XR17(C|D)15X
+ */
+#define UART_EXAR_8XMODE 0x88 /* 8X sampling rate select */
+#define UART_EXAR_SLEEP 0x8b /* Sleep mode */
+#define UART_EXAR_DVID 0x8d /* Device identification */
+
+#define UART_EXAR_FCTR 0x08 /* Feature Control Register */
+#define UART_FCTR_EXAR_IRDA 0x08 /* IrDa data encode select */
+#define UART_FCTR_EXAR_485 0x10 /* Auto 485 half duplex dir ctl */
+#define UART_FCTR_EXAR_TRGA 0x00 /* FIFO trigger table A */
+#define UART_FCTR_EXAR_TRGB 0x60 /* FIFO trigger table B */
+#define UART_FCTR_EXAR_TRGC 0x80 /* FIFO trigger table C */
+#define UART_FCTR_EXAR_TRGD 0xc0 /* FIFO trigger table D programmable */
+
+#define UART_EXAR_TXTRG 0x0a /* Tx FIFO trigger level write-only */
+#define UART_EXAR_RXTRG 0x0b /* Rx FIFO trigger level write-only */
+
#endif /* _LINUX_SERIAL_REG_H */
diff --git a/kernel/auditsc.c b/kernel/auditsc.c
index 2f186ed..fc7376b 100644
--- a/kernel/auditsc.c
+++ b/kernel/auditsc.c
@@ -1159,7 +1159,7 @@
cred = current_cred();
spin_lock_irq(&tsk->sighand->siglock);
- if (tsk->signal && tsk->signal->tty && tsk->signal->tty->name)
+ if (tsk->signal && tsk->signal->tty)
tty = tsk->signal->tty->name;
else
tty = "(none)";
diff --git a/kernel/cpu.c b/kernel/cpu.c
index 42bd331..f45657f 100644
--- a/kernel/cpu.c
+++ b/kernel/cpu.c
@@ -348,11 +348,13 @@
unsigned long mod = tasks_frozen ? CPU_TASKS_FROZEN : 0;
struct task_struct *idle;
- if (cpu_online(cpu) || !cpu_present(cpu))
- return -EINVAL;
-
cpu_hotplug_begin();
+ if (cpu_online(cpu) || !cpu_present(cpu)) {
+ ret = -EINVAL;
+ goto out;
+ }
+
idle = idle_thread_get(cpu);
if (IS_ERR(idle)) {
ret = PTR_ERR(idle);
diff --git a/kernel/ksysfs.c b/kernel/ksysfs.c
index 4e316e1..c01eac6 100644
--- a/kernel/ksysfs.c
+++ b/kernel/ksysfs.c
@@ -26,7 +26,6 @@
static struct kobj_attribute _name##_attr = \
__ATTR(_name, 0644, _name##_show, _name##_store)
-#if defined(CONFIG_HOTPLUG)
/* current uevent sequence number */
static ssize_t uevent_seqnum_show(struct kobject *kobj,
struct kobj_attribute *attr, char *buf)
@@ -54,7 +53,7 @@
return count;
}
KERNEL_ATTR_RW(uevent_helper);
-#endif
+
#ifdef CONFIG_PROFILING
static ssize_t profiling_show(struct kobject *kobj,
@@ -169,10 +168,8 @@
static struct attribute * kernel_attrs[] = {
&fscaps_attr.attr,
-#if defined(CONFIG_HOTPLUG)
&uevent_seqnum_attr.attr,
&uevent_helper_attr.attr,
-#endif
#ifdef CONFIG_PROFILING
&profiling_attr.attr,
#endif
diff --git a/kernel/power/main.c b/kernel/power/main.c
index f458238..1c16f91 100644
--- a/kernel/power/main.c
+++ b/kernel/power/main.c
@@ -59,7 +59,7 @@
{
unsigned long val;
- if (strict_strtoul(buf, 10, &val))
+ if (kstrtoul(buf, 10, &val))
return -EINVAL;
if (val > 1)
diff --git a/kernel/power/qos.c b/kernel/power/qos.c
index 846bd42..9322ff7 100644
--- a/kernel/power/qos.c
+++ b/kernel/power/qos.c
@@ -213,6 +213,69 @@
}
/**
+ * pm_qos_flags_remove_req - Remove device PM QoS flags request.
+ * @pqf: Device PM QoS flags set to remove the request from.
+ * @req: Request to remove from the set.
+ */
+static void pm_qos_flags_remove_req(struct pm_qos_flags *pqf,
+ struct pm_qos_flags_request *req)
+{
+ s32 val = 0;
+
+ list_del(&req->node);
+ list_for_each_entry(req, &pqf->list, node)
+ val |= req->flags;
+
+ pqf->effective_flags = val;
+}
+
+/**
+ * pm_qos_update_flags - Update a set of PM QoS flags.
+ * @pqf: Set of flags to update.
+ * @req: Request to add to the set, to modify, or to remove from the set.
+ * @action: Action to take on the set.
+ * @val: Value of the request to add or modify.
+ *
+ * Update the given set of PM QoS flags and call notifiers if the aggregate
+ * value has changed. Returns 1 if the aggregate constraint value has changed,
+ * 0 otherwise.
+ */
+bool pm_qos_update_flags(struct pm_qos_flags *pqf,
+ struct pm_qos_flags_request *req,
+ enum pm_qos_req_action action, s32 val)
+{
+ unsigned long irqflags;
+ s32 prev_value, curr_value;
+
+ spin_lock_irqsave(&pm_qos_lock, irqflags);
+
+ prev_value = list_empty(&pqf->list) ? 0 : pqf->effective_flags;
+
+ switch (action) {
+ case PM_QOS_REMOVE_REQ:
+ pm_qos_flags_remove_req(pqf, req);
+ break;
+ case PM_QOS_UPDATE_REQ:
+ pm_qos_flags_remove_req(pqf, req);
+ case PM_QOS_ADD_REQ:
+ req->flags = val;
+ INIT_LIST_HEAD(&req->node);
+ list_add_tail(&req->node, &pqf->list);
+ pqf->effective_flags |= val;
+ break;
+ default:
+ /* no action */
+ ;
+ }
+
+ curr_value = list_empty(&pqf->list) ? 0 : pqf->effective_flags;
+
+ spin_unlock_irqrestore(&pm_qos_lock, irqflags);
+
+ return prev_value != curr_value;
+}
+
+/**
* pm_qos_request - returns current system wide qos expectation
* @pm_qos_class: identification of which qos value is requested
*
@@ -500,7 +563,7 @@
} else {
ascii_value[count] = '\0';
}
- ret = strict_strtoul(ascii_value, 16, &ulval);
+ ret = kstrtoul(ascii_value, 16, &ulval);
if (ret) {
pr_debug("%s, 0x%lx, 0x%x\n", ascii_value, ulval, ret);
return -EINVAL;
diff --git a/kernel/power/swap.c b/kernel/power/swap.c
index 3c9d764..7c33ed2 100644
--- a/kernel/power/swap.c
+++ b/kernel/power/swap.c
@@ -126,7 +126,7 @@
/* Figure out where to put the new node */
while (*new) {
- ext = container_of(*new, struct swsusp_extent, node);
+ ext = rb_entry(*new, struct swsusp_extent, node);
parent = *new;
if (swap_offset < ext->start) {
/* Try to merge */
diff --git a/kernel/printk.c b/kernel/printk.c
index 2d607f4..22e070f 100644
--- a/kernel/printk.c
+++ b/kernel/printk.c
@@ -87,6 +87,12 @@
struct console *console_drivers;
EXPORT_SYMBOL_GPL(console_drivers);
+#ifdef CONFIG_LOCKDEP
+static struct lockdep_map console_lock_dep_map = {
+ .name = "console_lock"
+};
+#endif
+
/*
* This is used for debugging the mess that is the VT code by
* keeping track if we have the console semaphore held. It's
@@ -1908,12 +1914,14 @@
*/
void console_lock(void)
{
- BUG_ON(in_interrupt());
+ might_sleep();
+
down(&console_sem);
if (console_suspended)
return;
console_locked = 1;
console_may_schedule = 1;
+ mutex_acquire(&console_lock_dep_map, 0, 0, _RET_IP_);
}
EXPORT_SYMBOL(console_lock);
@@ -1935,6 +1943,7 @@
}
console_locked = 1;
console_may_schedule = 0;
+ mutex_acquire(&console_lock_dep_map, 0, 1, _RET_IP_);
return 1;
}
EXPORT_SYMBOL(console_trylock);
@@ -2095,6 +2104,7 @@
local_irq_restore(flags);
}
console_locked = 0;
+ mutex_release(&console_lock_dep_map, 1, _RET_IP_);
/* Release the exclusive_console once it is used */
if (unlikely(exclusive_console))
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index 26f65ea..33f71f3 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -565,7 +565,7 @@
.extra2 = &one,
},
#endif
-#ifdef CONFIG_HOTPLUG
+
{
.procname = "hotplug",
.data = &uevent_helper,
@@ -573,7 +573,7 @@
.mode = 0644,
.proc_handler = proc_dostring,
},
-#endif
+
#ifdef CONFIG_CHR_DEV_SG
{
.procname = "sg-big-buff",
diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c
index a402608..6f33706 100644
--- a/kernel/time/tick-sched.c
+++ b/kernel/time/tick-sched.c
@@ -526,6 +526,8 @@
if (!ts->inidle)
return;
+ /* Cancel the timer because CPU already waken up from the C-states*/
+ menu_hrtimer_cancel();
__tick_nohz_idle_enter(ts);
}
@@ -621,6 +623,8 @@
ts->inidle = 0;
+ /* Cancel the timer because CPU already waken up from the C-states*/
+ menu_hrtimer_cancel();
if (ts->idle_active || ts->tick_stopped)
now = ktime_get();
diff --git a/lib/Makefile b/lib/Makefile
index a08b791..e3723c7 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -12,7 +12,7 @@
idr.o int_sqrt.o extable.o \
sha1.o md5.o irq_regs.o reciprocal_div.o argv_split.o \
proportions.o flex_proportions.o prio_heap.o ratelimit.o show_mem.o \
- is_single_threaded.o plist.o decompress.o
+ is_single_threaded.o plist.o decompress.o kobject_uevent.o
lib-$(CONFIG_MMU) += ioremap.o
lib-$(CONFIG_SMP) += cpumask.o
@@ -31,7 +31,6 @@
CFLAGS_kobject_uevent.o += -DDEBUG
endif
-lib-$(CONFIG_HOTPLUG) += kobject_uevent.o
obj-$(CONFIG_GENERIC_IOMAP) += iomap.o
obj-$(CONFIG_GENERIC_PCI_IOMAP) += pci_iomap.o
obj-$(CONFIG_HAS_IOMEM) += iomap_copy.o devres.o
diff --git a/mm/mmap.c b/mm/mmap.c
index 5646677..f940062 100644
--- a/mm/mmap.c
+++ b/mm/mmap.c
@@ -90,6 +90,20 @@
struct percpu_counter vm_committed_as ____cacheline_aligned_in_smp;
/*
+ * The global memory commitment made in the system can be a metric
+ * that can be used to drive ballooning decisions when Linux is hosted
+ * as a guest. On Hyper-V, the host implements a policy engine for dynamically
+ * balancing memory across competing virtual machines that are hosted.
+ * Several metrics drive this policy engine including the guest reported
+ * memory commitment.
+ */
+unsigned long vm_memory_committed(void)
+{
+ return percpu_counter_read_positive(&vm_committed_as);
+}
+EXPORT_SYMBOL_GPL(vm_memory_committed);
+
+/*
* Check that a process has enough memory to allocate a new virtual
* mapping. 0 means there is enough memory for the allocation to
* succeed and -ENOMEM implies there is not.
diff --git a/mm/nommu.c b/mm/nommu.c
index 45131b4..79c3cac 100644
--- a/mm/nommu.c
+++ b/mm/nommu.c
@@ -66,6 +66,21 @@
atomic_long_t mmap_pages_allocated;
+/*
+ * The global memory commitment made in the system can be a metric
+ * that can be used to drive ballooning decisions when Linux is hosted
+ * as a guest. On Hyper-V, the host implements a policy engine for dynamically
+ * balancing memory across competing virtual machines that are hosted.
+ * Several metrics drive this policy engine including the guest reported
+ * memory commitment.
+ */
+unsigned long vm_memory_committed(void)
+{
+ return percpu_counter_read_positive(&vm_committed_as);
+}
+
+EXPORT_SYMBOL_GPL(vm_memory_committed);
+
EXPORT_SYMBOL(mem_map);
EXPORT_SYMBOL(num_physpages);
diff --git a/net/irda/ircomm/ircomm_tty.c b/net/irda/ircomm/ircomm_tty.c
index 496ce2c..a68c88c 100644
--- a/net/irda/ircomm/ircomm_tty.c
+++ b/net/irda/ircomm/ircomm_tty.c
@@ -183,6 +183,7 @@
ircomm_tty_shutdown(self);
self->magic = 0;
+ tty_port_destroy(&self->port);
kfree(self);
}
diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c
index 0d93856..ff36c50 100644
--- a/scripts/mod/modpost.c
+++ b/scripts/mod/modpost.c
@@ -858,25 +858,23 @@
#define ALL_INIT_DATA_SECTIONS \
".init.setup$", ".init.rodata$", \
- ".devinit.rodata$", ".cpuinit.rodata$", ".meminit.rodata$", \
- ".init.data$", ".devinit.data$", ".cpuinit.data$", ".meminit.data$"
+ ".cpuinit.rodata$", ".meminit.rodata$", \
+ ".init.data$", ".cpuinit.data$", ".meminit.data$"
#define ALL_EXIT_DATA_SECTIONS \
- ".exit.data$", ".devexit.data$", ".cpuexit.data$", ".memexit.data$"
+ ".exit.data$", ".cpuexit.data$", ".memexit.data$"
#define ALL_INIT_TEXT_SECTIONS \
- ".init.text$", ".devinit.text$", ".cpuinit.text$", ".meminit.text$"
+ ".init.text$", ".cpuinit.text$", ".meminit.text$"
#define ALL_EXIT_TEXT_SECTIONS \
- ".exit.text$", ".devexit.text$", ".cpuexit.text$", ".memexit.text$"
+ ".exit.text$", ".cpuexit.text$", ".memexit.text$"
#define ALL_PCI_INIT_SECTIONS \
".pci_fixup_early$", ".pci_fixup_header$", ".pci_fixup_final$", \
".pci_fixup_enable$", ".pci_fixup_resume$", \
".pci_fixup_resume_early$", ".pci_fixup_suspend$"
-#define ALL_XXXINIT_SECTIONS DEV_INIT_SECTIONS, CPU_INIT_SECTIONS, \
- MEM_INIT_SECTIONS
-#define ALL_XXXEXIT_SECTIONS DEV_EXIT_SECTIONS, CPU_EXIT_SECTIONS, \
- MEM_EXIT_SECTIONS
+#define ALL_XXXINIT_SECTIONS CPU_INIT_SECTIONS, MEM_INIT_SECTIONS
+#define ALL_XXXEXIT_SECTIONS CPU_EXIT_SECTIONS, MEM_EXIT_SECTIONS
#define ALL_INIT_SECTIONS INIT_SECTIONS, ALL_XXXINIT_SECTIONS
#define ALL_EXIT_SECTIONS EXIT_SECTIONS, ALL_XXXEXIT_SECTIONS
@@ -885,12 +883,10 @@
#define TEXT_SECTIONS ".text$"
#define INIT_SECTIONS ".init.*"
-#define DEV_INIT_SECTIONS ".devinit.*"
#define CPU_INIT_SECTIONS ".cpuinit.*"
#define MEM_INIT_SECTIONS ".meminit.*"
#define EXIT_SECTIONS ".exit.*"
-#define DEV_EXIT_SECTIONS ".devexit.*"
#define CPU_EXIT_SECTIONS ".cpuexit.*"
#define MEM_EXIT_SECTIONS ".memexit.*"
@@ -979,7 +975,7 @@
.mismatch = DATA_TO_ANY_EXIT,
.symbol_white_list = { DEFAULT_SYMBOL_WHITE_LIST, NULL },
},
-/* Do not reference init code/data from devinit/cpuinit/meminit code/data */
+/* Do not reference init code/data from cpuinit/meminit code/data */
{
.fromsec = { ALL_XXXINIT_SECTIONS, NULL },
.tosec = { INIT_SECTIONS, NULL },
@@ -1000,7 +996,7 @@
.mismatch = XXXINIT_TO_SOME_INIT,
.symbol_white_list = { DEFAULT_SYMBOL_WHITE_LIST, NULL },
},
-/* Do not reference exit code/data from devexit/cpuexit/memexit code/data */
+/* Do not reference exit code/data from cpuexit/memexit code/data */
{
.fromsec = { ALL_XXXEXIT_SECTIONS, NULL },
.tosec = { EXIT_SECTIONS, NULL },
@@ -1089,7 +1085,7 @@
* Pattern 2:
* Many drivers utilise a *driver container with references to
* add, remove, probe functions etc.
- * These functions may often be marked __devinit and we do not want to
+ * These functions may often be marked __cpuinit and we do not want to
* warn here.
* the pattern is identified by:
* tosec = init or exit section
diff --git a/tools/hv/hv_kvp_daemon.c b/tools/hv/hv_kvp_daemon.c
index 5959aff..d25a469 100644
--- a/tools/hv/hv_kvp_daemon.c
+++ b/tools/hv/hv_kvp_daemon.c
@@ -43,6 +43,7 @@
#include <sys/stat.h>
#include <fcntl.h>
#include <dirent.h>
+#include <net/if.h>
/*
* KVP protocol: The user mode component first registers with the
@@ -88,6 +89,7 @@
static char *os_minor = "";
static char *processor_arch;
static char *os_build;
+static char *os_version;
static char *lic_version = "Unknown version";
static struct utsname uts_buf;
@@ -297,7 +299,7 @@
return 0;
}
-static int kvp_key_delete(int pool, __u8 *key, int key_size)
+static int kvp_key_delete(int pool, const char *key, int key_size)
{
int i;
int j, k;
@@ -340,7 +342,7 @@
return 1;
}
-static int kvp_key_add_or_modify(int pool, __u8 *key, int key_size, __u8 *value,
+static int kvp_key_add_or_modify(int pool, const char *key, int key_size, const char *value,
int value_size)
{
int i;
@@ -394,7 +396,7 @@
return 0;
}
-static int kvp_get_value(int pool, __u8 *key, int key_size, __u8 *value,
+static int kvp_get_value(int pool, const char *key, int key_size, char *value,
int value_size)
{
int i;
@@ -426,8 +428,8 @@
return 1;
}
-static int kvp_pool_enumerate(int pool, int index, __u8 *key, int key_size,
- __u8 *value, int value_size)
+static int kvp_pool_enumerate(int pool, int index, char *key, int key_size,
+ char *value, int value_size)
{
struct kvp_record *record;
@@ -453,7 +455,9 @@
char *p, buf[512];
uname(&uts_buf);
- os_build = uts_buf.release;
+ os_version = uts_buf.release;
+ os_build = strdup(uts_buf.release);
+
os_name = uts_buf.sysname;
processor_arch = uts_buf.machine;
@@ -462,7 +466,7 @@
* string to be of the form: x.y.z
* Strip additional information we may have.
*/
- p = strchr(os_build, '-');
+ p = strchr(os_version, '-');
if (p)
*p = '\0';
@@ -879,7 +883,7 @@
addr_length = INET6_ADDRSTRLEN;
}
- if ((length - *offset) < addr_length + 1)
+ if ((length - *offset) < addr_length + 2)
return HV_E_FAIL;
if (str == NULL) {
strcpy(buffer, "inet_ntop failed\n");
@@ -887,11 +891,13 @@
}
if (*offset == 0)
strcpy(buffer, tmp);
- else
+ else {
+ strcat(buffer, ";");
strcat(buffer, tmp);
- strcat(buffer, ";");
+ }
*offset += strlen(str) + 1;
+
return 0;
}
@@ -953,7 +959,9 @@
* supported address families; if not we gather info on
* the specified address family.
*/
- if ((family != 0) && (curp->ifa_addr->sa_family != family)) {
+ if ((((family != 0) &&
+ (curp->ifa_addr->sa_family != family))) ||
+ (curp->ifa_flags & IFF_LOOPBACK)) {
curp = curp->ifa_next;
continue;
}
@@ -1478,13 +1486,19 @@
len = recvfrom(fd, kvp_recv_buffer, sizeof(kvp_recv_buffer), 0,
addr_p, &addr_l);
- if (len < 0 || addr.nl_pid) {
+ if (len < 0) {
syslog(LOG_ERR, "recvfrom failed; pid:%u error:%d %s",
addr.nl_pid, errno, strerror(errno));
close(fd);
return -1;
}
+ if (addr.nl_pid) {
+ syslog(LOG_WARNING, "Received packet from untrusted pid:%u",
+ addr.nl_pid);
+ continue;
+ }
+
incoming_msg = (struct nlmsghdr *)kvp_recv_buffer;
incoming_cn_msg = (struct cn_msg *)NLMSG_DATA(incoming_msg);
hv_msg = (struct hv_kvp_msg *)incoming_cn_msg->data;
@@ -1649,7 +1663,7 @@
strcpy(key_name, "OSMinorVersion");
break;
case OSVersion:
- strcpy(key_value, os_build);
+ strcpy(key_value, os_version);
strcpy(key_name, "OSVersion");
break;
case ProcessorArchitecture:
diff --git a/tools/power/cpupower/.gitignore b/tools/power/cpupower/.gitignore
index 8a83dd2..d42073f 100644
--- a/tools/power/cpupower/.gitignore
+++ b/tools/power/cpupower/.gitignore
@@ -20,3 +20,10 @@
utils/cpufreq-aperf.o
cpupower
bench/cpufreq-bench
+debug/kernel/Module.symvers
+debug/i386/centrino-decode
+debug/i386/dump_psb
+debug/i386/intel_gsic
+debug/i386/powernow-k8-decode
+debug/x86_64/centrino-decode
+debug/x86_64/powernow-k8-decode
diff --git a/tools/power/cpupower/Makefile b/tools/power/cpupower/Makefile
index cf397bd..d875a74 100644
--- a/tools/power/cpupower/Makefile
+++ b/tools/power/cpupower/Makefile
@@ -253,7 +253,8 @@
| xargs rm -f
-rm -f $(OUTPUT)cpupower
-rm -f $(OUTPUT)libcpupower.so*
- -rm -rf $(OUTPUT)po/*.{gmo,pot}
+ -rm -rf $(OUTPUT)po/*.gmo
+ -rm -rf $(OUTPUT)po/*.pot
$(MAKE) -C bench O=$(OUTPUT) clean
diff --git a/tools/power/cpupower/debug/i386/Makefile b/tools/power/cpupower/debug/i386/Makefile
index 3ba158f..c05cc0a 100644
--- a/tools/power/cpupower/debug/i386/Makefile
+++ b/tools/power/cpupower/debug/i386/Makefile
@@ -26,7 +26,10 @@
all: $(OUTPUT)centrino-decode $(OUTPUT)dump_psb $(OUTPUT)intel_gsic $(OUTPUT)powernow-k8-decode
clean:
- rm -rf $(OUTPUT){centrino-decode,dump_psb,intel_gsic,powernow-k8-decode}
+ rm -rf $(OUTPUT)centrino-decode
+ rm -rf $(OUTPUT)dump_psb
+ rm -rf $(OUTPUT)intel_gsic
+ rm -rf $(OUTPUT)powernow-k8-decode
install:
$(INSTALL) -d $(DESTDIR)${bindir}
diff --git a/tools/power/cpupower/man/cpupower-monitor.1 b/tools/power/cpupower/man/cpupower-monitor.1
index 1141c20..e01c35d 100644
--- a/tools/power/cpupower/man/cpupower-monitor.1
+++ b/tools/power/cpupower/man/cpupower-monitor.1
@@ -7,11 +7,11 @@
.RB "\-l"
.B cpupower monitor
-.RB [ "\-m <mon1>," [ "<mon2>,..." ] ]
+.RB [ -c ] [ "\-m <mon1>," [ "<mon2>,..." ] ]
.RB [ "\-i seconds" ]
.br
.B cpupower monitor
-.RB [ "\-m <mon1>," [ "<mon2>,..." ] ]
+.RB [ -c ][ "\-m <mon1>," [ "<mon2>,..." ] ]
.RB command
.br
.SH DESCRIPTION
@@ -64,6 +64,17 @@
Measure intervall.
.RE
.PP
+\-c
+.RS 4
+Schedule the process on every core before starting and ending measuring.
+This could be needed for the Idle_Stats monitor when no other MSR based
+monitor (has to be run on the core that is measured) is run in parallel.
+This is to wake up the processors from deeper sleep states and let the
+kernel re
+-account its cpuidle (C-state) information before reading the
+cpuidle timings from sysfs.
+.RE
+.PP
command
.RS 4
Measure idle and frequency characteristics of an arbitrary command/workload.
diff --git a/tools/power/cpupower/utils/helpers/cpuid.c b/tools/power/cpupower/utils/helpers/cpuid.c
index 906895d..93b0aa7 100644
--- a/tools/power/cpupower/utils/helpers/cpuid.c
+++ b/tools/power/cpupower/utils/helpers/cpuid.c
@@ -158,6 +158,8 @@
cpu_info->caps |= CPUPOWER_CAP_HAS_TURBO_RATIO;
case 0x2A: /* SNB */
case 0x2D: /* SNB Xeon */
+ case 0x3A: /* IVB */
+ case 0x3E: /* IVB Xeon */
cpu_info->caps |= CPUPOWER_CAP_HAS_TURBO_RATIO;
cpu_info->caps |= CPUPOWER_CAP_IS_SNB;
break;
diff --git a/tools/power/cpupower/utils/helpers/helpers.h b/tools/power/cpupower/utils/helpers/helpers.h
index 2eb584c..aa9e954 100644
--- a/tools/power/cpupower/utils/helpers/helpers.h
+++ b/tools/power/cpupower/utils/helpers/helpers.h
@@ -92,6 +92,14 @@
extern struct cpupower_cpu_info cpupower_cpu_info;
/* cpuid and cpuinfo helpers **************************/
+struct cpuid_core_info {
+ int pkg;
+ int core;
+ int cpu;
+
+ /* flags */
+ unsigned int is_online:1;
+};
/* CPU topology/hierarchy parsing ******************/
struct cpupower_topology {
@@ -101,18 +109,12 @@
unsigned int threads; /* per core */
/* Array gets mallocated with cores entries, holding per core info */
- struct {
- int pkg;
- int core;
- int cpu;
-
- /* flags */
- unsigned int is_online:1;
- } *core_info;
+ struct cpuid_core_info *core_info;
};
extern int get_cpu_topology(struct cpupower_topology *cpu_top);
extern void cpu_topology_release(struct cpupower_topology cpu_top);
+
/* CPU topology/hierarchy parsing ******************/
/* X86 ONLY ****************************************/
diff --git a/tools/power/cpupower/utils/helpers/sysfs.c b/tools/power/cpupower/utils/helpers/sysfs.c
index 96e28c1..38ab916 100644
--- a/tools/power/cpupower/utils/helpers/sysfs.c
+++ b/tools/power/cpupower/utils/helpers/sysfs.c
@@ -37,25 +37,6 @@
return (unsigned int) numread;
}
-static unsigned int sysfs_write_file(const char *path,
- const char *value, size_t len)
-{
- int fd;
- ssize_t numwrite;
-
- fd = open(path, O_WRONLY);
- if (fd == -1)
- return 0;
-
- numwrite = write(fd, value, len);
- if (numwrite < 1) {
- close(fd);
- return 0;
- }
- close(fd);
- return (unsigned int) numwrite;
-}
-
/*
* Detect whether a CPU is online
*
diff --git a/tools/power/cpupower/utils/helpers/topology.c b/tools/power/cpupower/utils/helpers/topology.c
index 4eae2c4..c13120a 100644
--- a/tools/power/cpupower/utils/helpers/topology.c
+++ b/tools/power/cpupower/utils/helpers/topology.c
@@ -20,9 +20,8 @@
#include <helpers/sysfs.h>
/* returns -1 on failure, 0 on success */
-int sysfs_topology_read_file(unsigned int cpu, const char *fname)
+static int sysfs_topology_read_file(unsigned int cpu, const char *fname, int *result)
{
- unsigned long value;
char linebuf[MAX_LINE_LEN];
char *endp;
char path[SYSFS_PATH_MAX];
@@ -31,20 +30,12 @@
cpu, fname);
if (sysfs_read_file(path, linebuf, MAX_LINE_LEN) == 0)
return -1;
- value = strtoul(linebuf, &endp, 0);
+ *result = strtol(linebuf, &endp, 0);
if (endp == linebuf || errno == ERANGE)
return -1;
- return value;
+ return 0;
}
-struct cpuid_core_info {
- unsigned int pkg;
- unsigned int thread;
- unsigned int cpu;
- /* flags */
- unsigned int is_online:1;
-};
-
static int __compare(const void *t1, const void *t2)
{
struct cpuid_core_info *top1 = (struct cpuid_core_info *)t1;
@@ -53,9 +44,9 @@
return -1;
else if (top1->pkg > top2->pkg)
return 1;
- else if (top1->thread < top2->thread)
+ else if (top1->core < top2->core)
return -1;
- else if (top1->thread > top2->thread)
+ else if (top1->core > top2->core)
return 1;
else if (top1->cpu < top2->cpu)
return -1;
@@ -73,28 +64,42 @@
*/
int get_cpu_topology(struct cpupower_topology *cpu_top)
{
- int cpu, cpus = sysconf(_SC_NPROCESSORS_CONF);
+ int cpu, last_pkg, cpus = sysconf(_SC_NPROCESSORS_CONF);
- cpu_top->core_info = malloc(sizeof(struct cpupower_topology) * cpus);
+ cpu_top->core_info = malloc(sizeof(struct cpuid_core_info) * cpus);
if (cpu_top->core_info == NULL)
return -ENOMEM;
cpu_top->pkgs = cpu_top->cores = 0;
for (cpu = 0; cpu < cpus; cpu++) {
cpu_top->core_info[cpu].cpu = cpu;
cpu_top->core_info[cpu].is_online = sysfs_is_cpu_online(cpu);
- cpu_top->core_info[cpu].pkg =
- sysfs_topology_read_file(cpu, "physical_package_id");
- if ((int)cpu_top->core_info[cpu].pkg != -1 &&
- cpu_top->core_info[cpu].pkg > cpu_top->pkgs)
- cpu_top->pkgs = cpu_top->core_info[cpu].pkg;
- cpu_top->core_info[cpu].core =
- sysfs_topology_read_file(cpu, "core_id");
+ if(sysfs_topology_read_file(
+ cpu,
+ "physical_package_id",
+ &(cpu_top->core_info[cpu].pkg)) < 0)
+ return -1;
+ if(sysfs_topology_read_file(
+ cpu,
+ "core_id",
+ &(cpu_top->core_info[cpu].core)) < 0)
+ return -1;
}
- cpu_top->pkgs++;
qsort(cpu_top->core_info, cpus, sizeof(struct cpuid_core_info),
__compare);
+ /* Count the number of distinct pkgs values. This works
+ because the primary sort of the core_info struct was just
+ done by pkg value. */
+ last_pkg = cpu_top->core_info[0].pkg;
+ for(cpu = 1; cpu < cpus; cpu++) {
+ if(cpu_top->core_info[cpu].pkg != last_pkg) {
+ last_pkg = cpu_top->core_info[cpu].pkg;
+ cpu_top->pkgs++;
+ }
+ }
+ cpu_top->pkgs++;
+
/* Intel's cores count is not consecutively numbered, there may
* be a core_id of 3, but none of 2. Assume there always is 0
* Get amount of cores by counting duplicates in a package
diff --git a/tools/power/cpupower/utils/idle_monitor/cpupower-monitor.c b/tools/power/cpupower/utils/idle_monitor/cpupower-monitor.c
index 0d6571e..c4bae92 100644
--- a/tools/power/cpupower/utils/idle_monitor/cpupower-monitor.c
+++ b/tools/power/cpupower/utils/idle_monitor/cpupower-monitor.c
@@ -39,6 +39,7 @@
static int interval = 1;
static char *show_monitors_param;
static struct cpupower_topology cpu_top;
+static unsigned int wake_cpus;
/* ToDo: Document this in the manpage */
static char range_abbr[RANGE_MAX] = { 'T', 'C', 'P', 'M', };
@@ -84,7 +85,7 @@
void print_header(int topology_depth)
{
int unsigned mon;
- int state, need_len, pr_mon_len;
+ int state, need_len;
cstate_t s;
char buf[128] = "";
int percent_width = 4;
@@ -93,7 +94,6 @@
printf("%s|", buf);
for (mon = 0; mon < avail_monitors; mon++) {
- pr_mon_len = 0;
need_len = monitors[mon]->hw_states_num * (percent_width + 3)
- 1;
if (mon != 0) {
@@ -315,16 +315,28 @@
int do_interval_measure(int i)
{
unsigned int num;
+ int cpu;
+
+ if (wake_cpus)
+ for (cpu = 0; cpu < cpu_count; cpu++)
+ bind_cpu(cpu);
for (num = 0; num < avail_monitors; num++) {
dprint("HW C-state residency monitor: %s - States: %d\n",
monitors[num]->name, monitors[num]->hw_states_num);
monitors[num]->start();
}
+
sleep(i);
+
+ if (wake_cpus)
+ for (cpu = 0; cpu < cpu_count; cpu++)
+ bind_cpu(cpu);
+
for (num = 0; num < avail_monitors; num++)
monitors[num]->stop();
+
return 0;
}
@@ -333,7 +345,7 @@
int opt;
progname = basename(argv[0]);
- while ((opt = getopt(argc, argv, "+li:m:")) != -1) {
+ while ((opt = getopt(argc, argv, "+lci:m:")) != -1) {
switch (opt) {
case 'l':
if (mode)
@@ -352,6 +364,9 @@
mode = show;
show_monitors_param = optarg;
break;
+ case 'c':
+ wake_cpus = 1;
+ break;
default:
print_wrong_arg_exit();
}
diff --git a/tools/power/cpupower/utils/idle_monitor/cpupower-monitor.h b/tools/power/cpupower/utils/idle_monitor/cpupower-monitor.h
index 9312ee1..9e43f33 100644
--- a/tools/power/cpupower/utils/idle_monitor/cpupower-monitor.h
+++ b/tools/power/cpupower/utils/idle_monitor/cpupower-monitor.h
@@ -65,4 +65,21 @@
"could be inaccurate\n"), mes, ov); \
}
+
+/* Taken over from x86info project sources -> return 0 on success */
+#include <sched.h>
+#include <sys/types.h>
+#include <unistd.h>
+static inline int bind_cpu(int cpu)
+{
+ cpu_set_t set;
+
+ if (sched_getaffinity(getpid(), sizeof(set), &set) == 0) {
+ CPU_ZERO(&set);
+ CPU_SET(cpu, &set);
+ return sched_setaffinity(getpid(), sizeof(set), &set);
+ }
+ return 1;
+}
+
#endif /* __CPUIDLE_INFO_HW__ */
diff --git a/tools/power/cpupower/utils/idle_monitor/snb_idle.c b/tools/power/cpupower/utils/idle_monitor/snb_idle.c
index a1bc07cd..a99b43b 100644
--- a/tools/power/cpupower/utils/idle_monitor/snb_idle.c
+++ b/tools/power/cpupower/utils/idle_monitor/snb_idle.c
@@ -150,9 +150,15 @@
|| cpupower_cpu_info.family != 6)
return NULL;
- if (cpupower_cpu_info.model != 0x2A
- && cpupower_cpu_info.model != 0x2D)
+ switch (cpupower_cpu_info.model) {
+ case 0x2A: /* SNB */
+ case 0x2D: /* SNB Xeon */
+ case 0x3A: /* IVB */
+ case 0x3E: /* IVB Xeon */
+ break;
+ default:
return NULL;
+ }
is_valid = calloc(cpu_count, sizeof(int));
for (num = 0; num < SNB_CSTATE_COUNT; num++) {