| /* |
| * net/tipc/core.h: Include file for TIPC global declarations |
| * |
| * Copyright (c) 2005-2006, Ericsson AB |
| * Copyright (c) 2005, Wind River Systems |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are met: |
| * |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * 3. Neither the names of the copyright holders nor the names of its |
| * contributors may be used to endorse or promote products derived from |
| * this software without specific prior written permission. |
| * |
| * Alternatively, this software may be distributed under the terms of the |
| * GNU General Public License ("GPL") version 2 as published by the Free |
| * Software Foundation. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE |
| * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
| * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
| * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
| * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| * POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #ifndef _TIPC_CORE_H |
| #define _TIPC_CORE_H |
| |
| #include <linux/tipc.h> |
| #include <linux/tipc_config.h> |
| #include <net/tipc/tipc_msg.h> |
| #include <net/tipc/tipc_port.h> |
| #include <net/tipc/tipc_bearer.h> |
| #include <net/tipc/tipc.h> |
| #include <linux/types.h> |
| #include <linux/kernel.h> |
| #include <linux/errno.h> |
| #include <linux/mm.h> |
| #include <linux/timer.h> |
| #include <linux/string.h> |
| #include <asm/uaccess.h> |
| #include <linux/interrupt.h> |
| #include <asm/atomic.h> |
| #include <asm/hardirq.h> |
| #include <linux/netdevice.h> |
| #include <linux/in.h> |
| #include <linux/list.h> |
| #include <linux/vmalloc.h> |
| |
| /* |
| * TIPC debugging code |
| */ |
| |
| #define assert(i) BUG_ON(!(i)) |
| |
| struct tipc_msg; |
| extern struct print_buf *CONS, *LOG; |
| extern struct print_buf *TEE(struct print_buf *, struct print_buf *); |
| void msg_print(struct print_buf*,struct tipc_msg *,const char*); |
| void tipc_printf(struct print_buf *, const char *fmt, ...); |
| void tipc_dump(struct print_buf*,const char *fmt, ...); |
| |
| #ifdef CONFIG_TIPC_DEBUG |
| |
| /* |
| * TIPC debug support included: |
| * - system messages are printed to TIPC_OUTPUT print buffer |
| * - debug messages are printed to DBG_OUTPUT print buffer |
| */ |
| |
| #define err(fmt, arg...) tipc_printf(TIPC_OUTPUT, KERN_ERR "TIPC: " fmt, ## arg) |
| #define warn(fmt, arg...) tipc_printf(TIPC_OUTPUT, KERN_WARNING "TIPC: " fmt, ## arg) |
| #define info(fmt, arg...) tipc_printf(TIPC_OUTPUT, KERN_NOTICE "TIPC: " fmt, ## arg) |
| |
| #define dbg(fmt, arg...) do {if (DBG_OUTPUT) tipc_printf(DBG_OUTPUT, fmt, ## arg);} while(0) |
| #define msg_dbg(msg, txt) do {if (DBG_OUTPUT) msg_print(DBG_OUTPUT, msg, txt);} while(0) |
| #define dump(fmt, arg...) do {if (DBG_OUTPUT) tipc_dump(DBG_OUTPUT, fmt, ##arg);} while(0) |
| |
| |
| /* |
| * By default, TIPC_OUTPUT is defined to be system console and TIPC log buffer, |
| * while DBG_OUTPUT is the null print buffer. These defaults can be changed |
| * here, or on a per .c file basis, by redefining these symbols. The following |
| * print buffer options are available: |
| * |
| * NULL : Output to null print buffer (i.e. print nowhere) |
| * CONS : Output to system console |
| * LOG : Output to TIPC log buffer |
| * &buf : Output to user-defined buffer (struct print_buf *) |
| * TEE(&buf_a,&buf_b) : Output to two print buffers (eg. TEE(CONS,LOG) ) |
| */ |
| |
| #ifndef TIPC_OUTPUT |
| #define TIPC_OUTPUT TEE(CONS,LOG) |
| #endif |
| |
| #ifndef DBG_OUTPUT |
| #define DBG_OUTPUT NULL |
| #endif |
| |
| #else |
| |
| #ifndef DBG_OUTPUT |
| #define DBG_OUTPUT NULL |
| #endif |
| |
| /* |
| * TIPC debug support not included: |
| * - system messages are printed to system console |
| * - debug messages are not printed |
| */ |
| |
| #define err(fmt, arg...) printk(KERN_ERR "TIPC: " fmt , ## arg) |
| #define info(fmt, arg...) printk(KERN_INFO "TIPC: " fmt , ## arg) |
| #define warn(fmt, arg...) printk(KERN_WARNING "TIPC: " fmt , ## arg) |
| |
| #define dbg(fmt, arg...) do {} while (0) |
| #define msg_dbg(msg,txt) do {} while (0) |
| #define dump(fmt,arg...) do {} while (0) |
| |
| #endif |
| |
| |
| /* |
| * TIPC-specific error codes |
| */ |
| |
| #define ELINKCONG EAGAIN /* link congestion <=> resource unavailable */ |
| |
| /* |
| * Global configuration variables |
| */ |
| |
| extern u32 tipc_own_addr; |
| extern int tipc_max_zones; |
| extern int tipc_max_clusters; |
| extern int tipc_max_nodes; |
| extern int tipc_max_slaves; |
| extern int tipc_max_ports; |
| extern int tipc_max_subscriptions; |
| extern int tipc_max_publications; |
| extern int tipc_net_id; |
| extern int tipc_remote_management; |
| |
| /* |
| * Other global variables |
| */ |
| |
| extern int tipc_mode; |
| extern int tipc_random; |
| extern const char tipc_alphabet[]; |
| extern atomic_t tipc_user_count; |
| |
| |
| /* |
| * Routines available to privileged subsystems |
| */ |
| |
| extern int start_core(void); |
| extern void stop_core(void); |
| extern int start_net(void); |
| extern void stop_net(void); |
| |
| static inline int delimit(int val, int min, int max) |
| { |
| if (val > max) |
| return max; |
| if (val < min) |
| return min; |
| return val; |
| } |
| |
| |
| /* |
| * TIPC timer and signal code |
| */ |
| |
| typedef void (*Handler) (unsigned long); |
| |
| u32 k_signal(Handler routine, unsigned long argument); |
| |
| /** |
| * k_init_timer - initialize a timer |
| * @timer: pointer to timer structure |
| * @routine: pointer to routine to invoke when timer expires |
| * @argument: value to pass to routine when timer expires |
| * |
| * Timer must be initialized before use (and terminated when no longer needed). |
| */ |
| |
| static inline void k_init_timer(struct timer_list *timer, Handler routine, |
| unsigned long argument) |
| { |
| dbg("initializing timer %p\n", timer); |
| init_timer(timer); |
| timer->function = routine; |
| timer->data = argument; |
| } |
| |
| /** |
| * k_start_timer - start a timer |
| * @timer: pointer to timer structure |
| * @msec: time to delay (in ms) |
| * |
| * Schedules a previously initialized timer for later execution. |
| * If timer is already running, the new timeout overrides the previous request. |
| * |
| * To ensure the timer doesn't expire before the specified delay elapses, |
| * the amount of delay is rounded up when converting to the jiffies |
| * then an additional jiffy is added to account for the fact that |
| * the starting time may be in the middle of the current jiffy. |
| */ |
| |
| static inline void k_start_timer(struct timer_list *timer, unsigned long msec) |
| { |
| dbg("starting timer %p for %u\n", timer, msec); |
| mod_timer(timer, jiffies + msecs_to_jiffies(msec) + 1); |
| } |
| |
| /** |
| * k_cancel_timer - cancel a timer |
| * @timer: pointer to timer structure |
| * |
| * Cancels a previously initialized timer. |
| * Can be called safely even if the timer is already inactive. |
| * |
| * WARNING: Must not be called when holding locks required by the timer's |
| * timeout routine, otherwise deadlock can occur on SMP systems! |
| */ |
| |
| static inline void k_cancel_timer(struct timer_list *timer) |
| { |
| dbg("cancelling timer %p\n", timer); |
| del_timer_sync(timer); |
| } |
| |
| /** |
| * k_term_timer - terminate a timer |
| * @timer: pointer to timer structure |
| * |
| * Prevents further use of a previously initialized timer. |
| * |
| * WARNING: Caller must ensure timer isn't currently running. |
| * |
| * (Do not "enhance" this routine to automatically cancel an active timer, |
| * otherwise deadlock can arise when a timeout routine calls k_term_timer.) |
| */ |
| |
| static inline void k_term_timer(struct timer_list *timer) |
| { |
| dbg("terminating timer %p\n", timer); |
| } |
| |
| |
| /* |
| * TIPC message buffer code |
| * |
| * TIPC message buffer headroom leaves room for 14 byte Ethernet header, |
| * while ensuring TIPC header is word aligned for quicker access |
| */ |
| |
| #define BUF_HEADROOM 16u |
| |
| struct tipc_skb_cb { |
| void *handle; |
| }; |
| |
| #define TIPC_SKB_CB(__skb) ((struct tipc_skb_cb *)&((__skb)->cb[0])) |
| |
| |
| static inline struct tipc_msg *buf_msg(struct sk_buff *skb) |
| { |
| return (struct tipc_msg *)skb->data; |
| } |
| |
| /** |
| * buf_acquire - creates a TIPC message buffer |
| * @size: message size (including TIPC header) |
| * |
| * Returns a new buffer. Space is reserved for a data link header. |
| */ |
| |
| static inline struct sk_buff *buf_acquire(u32 size) |
| { |
| struct sk_buff *skb; |
| unsigned int buf_size = (BUF_HEADROOM + size + 3) & ~3u; |
| |
| skb = alloc_skb(buf_size, GFP_ATOMIC); |
| if (skb) { |
| skb_reserve(skb, BUF_HEADROOM); |
| skb_put(skb, size); |
| skb->next = NULL; |
| } |
| return skb; |
| } |
| |
| /** |
| * buf_discard - frees a TIPC message buffer |
| * @skb: message buffer |
| * |
| * Frees a new buffer. If passed NULL, just returns. |
| */ |
| |
| static inline void buf_discard(struct sk_buff *skb) |
| { |
| if (likely(skb != NULL)) |
| kfree_skb(skb); |
| } |
| |
| #endif |