| /* Driver for Philips webcam |
| Functions that send various control messages to the webcam, including |
| video modes. |
| (C) 1999-2003 Nemosoft Unv. |
| (C) 2004-2006 Luc Saillard (luc@saillard.org) |
| |
| NOTE: this version of pwc is an unofficial (modified) release of pwc & pcwx |
| driver and thus may have bugs that are not present in the original version. |
| Please send bug reports and support requests to <luc@saillard.org>. |
| |
| NOTE: this version of pwc is an unofficial (modified) release of pwc & pcwx |
| driver and thus may have bugs that are not present in the original version. |
| Please send bug reports and support requests to <luc@saillard.org>. |
| The decompression routines have been implemented by reverse-engineering the |
| Nemosoft binary pwcx module. Caveat emptor. |
| |
| This program is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation; either version 2 of the License, or |
| (at your option) any later version. |
| |
| This program is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with this program; if not, write to the Free Software |
| Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| */ |
| |
| /* |
| Changes |
| 2001/08/03 Alvarado Added methods for changing white balance and |
| red/green gains |
| */ |
| |
| /* Control functions for the cam; brightness, contrast, video mode, etc. */ |
| |
| #ifdef __KERNEL__ |
| #include <asm/uaccess.h> |
| #endif |
| #include <asm/errno.h> |
| #include <linux/version.h> |
| |
| #include "pwc.h" |
| #include "pwc-uncompress.h" |
| #include "pwc-kiara.h" |
| #include "pwc-timon.h" |
| #include "pwc-dec1.h" |
| #include "pwc-dec23.h" |
| |
| /* Request types: video */ |
| #define SET_LUM_CTL 0x01 |
| #define GET_LUM_CTL 0x02 |
| #define SET_CHROM_CTL 0x03 |
| #define GET_CHROM_CTL 0x04 |
| #define SET_STATUS_CTL 0x05 |
| #define GET_STATUS_CTL 0x06 |
| #define SET_EP_STREAM_CTL 0x07 |
| #define GET_EP_STREAM_CTL 0x08 |
| #define GET_XX_CTL 0x09 |
| #define SET_XX_CTL 0x0A |
| #define GET_XY_CTL 0x0B |
| #define SET_XY_CTL 0x0C |
| #define SET_MPT_CTL 0x0D |
| #define GET_MPT_CTL 0x0E |
| |
| /* Selectors for the Luminance controls [GS]ET_LUM_CTL */ |
| #define AGC_MODE_FORMATTER 0x2000 |
| #define PRESET_AGC_FORMATTER 0x2100 |
| #define SHUTTER_MODE_FORMATTER 0x2200 |
| #define PRESET_SHUTTER_FORMATTER 0x2300 |
| #define PRESET_CONTOUR_FORMATTER 0x2400 |
| #define AUTO_CONTOUR_FORMATTER 0x2500 |
| #define BACK_LIGHT_COMPENSATION_FORMATTER 0x2600 |
| #define CONTRAST_FORMATTER 0x2700 |
| #define DYNAMIC_NOISE_CONTROL_FORMATTER 0x2800 |
| #define FLICKERLESS_MODE_FORMATTER 0x2900 |
| #define AE_CONTROL_SPEED 0x2A00 |
| #define BRIGHTNESS_FORMATTER 0x2B00 |
| #define GAMMA_FORMATTER 0x2C00 |
| |
| /* Selectors for the Chrominance controls [GS]ET_CHROM_CTL */ |
| #define WB_MODE_FORMATTER 0x1000 |
| #define AWB_CONTROL_SPEED_FORMATTER 0x1100 |
| #define AWB_CONTROL_DELAY_FORMATTER 0x1200 |
| #define PRESET_MANUAL_RED_GAIN_FORMATTER 0x1300 |
| #define PRESET_MANUAL_BLUE_GAIN_FORMATTER 0x1400 |
| #define COLOUR_MODE_FORMATTER 0x1500 |
| #define SATURATION_MODE_FORMATTER1 0x1600 |
| #define SATURATION_MODE_FORMATTER2 0x1700 |
| |
| /* Selectors for the Status controls [GS]ET_STATUS_CTL */ |
| #define SAVE_USER_DEFAULTS_FORMATTER 0x0200 |
| #define RESTORE_USER_DEFAULTS_FORMATTER 0x0300 |
| #define RESTORE_FACTORY_DEFAULTS_FORMATTER 0x0400 |
| #define READ_AGC_FORMATTER 0x0500 |
| #define READ_SHUTTER_FORMATTER 0x0600 |
| #define READ_RED_GAIN_FORMATTER 0x0700 |
| #define READ_BLUE_GAIN_FORMATTER 0x0800 |
| #define GET_STATUS_B00 0x0B00 |
| #define SENSOR_TYPE_FORMATTER1 0x0C00 |
| #define GET_STATUS_3000 0x3000 |
| #define READ_RAW_Y_MEAN_FORMATTER 0x3100 |
| #define SET_POWER_SAVE_MODE_FORMATTER 0x3200 |
| #define MIRROR_IMAGE_FORMATTER 0x3300 |
| #define LED_FORMATTER 0x3400 |
| #define LOWLIGHT 0x3500 |
| #define GET_STATUS_3600 0x3600 |
| #define SENSOR_TYPE_FORMATTER2 0x3700 |
| #define GET_STATUS_3800 0x3800 |
| #define GET_STATUS_4000 0x4000 |
| #define GET_STATUS_4100 0x4100 /* Get */ |
| #define CTL_STATUS_4200 0x4200 /* [GS] 1 */ |
| |
| /* Formatters for the Video Endpoint controls [GS]ET_EP_STREAM_CTL */ |
| #define VIDEO_OUTPUT_CONTROL_FORMATTER 0x0100 |
| |
| /* Formatters for the motorized pan & tilt [GS]ET_MPT_CTL */ |
| #define PT_RELATIVE_CONTROL_FORMATTER 0x01 |
| #define PT_RESET_CONTROL_FORMATTER 0x02 |
| #define PT_STATUS_FORMATTER 0x03 |
| |
| static const char *size2name[PSZ_MAX] = |
| { |
| "subQCIF", |
| "QSIF", |
| "QCIF", |
| "SIF", |
| "CIF", |
| "VGA", |
| }; |
| |
| /********/ |
| |
| /* Entries for the Nala (645/646) camera; the Nala doesn't have compression |
| preferences, so you either get compressed or non-compressed streams. |
| |
| An alternate value of 0 means this mode is not available at all. |
| */ |
| |
| #define PWC_FPS_MAX_NALA 8 |
| |
| struct Nala_table_entry { |
| char alternate; /* USB alternate setting */ |
| int compressed; /* Compressed yes/no */ |
| |
| unsigned char mode[3]; /* precomputed mode table */ |
| }; |
| |
| static unsigned int Nala_fps_vector[PWC_FPS_MAX_NALA] = { 4, 5, 7, 10, 12, 15, 20, 24 }; |
| |
| static struct Nala_table_entry Nala_table[PSZ_MAX][PWC_FPS_MAX_NALA] = |
| { |
| #include "pwc-nala.h" |
| }; |
| |
| static void pwc_set_image_buffer_size(struct pwc_device *pdev); |
| |
| /****************************************************************************/ |
| |
| |
| #define SendControlMsg(request, value, buflen) \ |
| usb_control_msg(pdev->udev, usb_sndctrlpipe(pdev->udev, 0), \ |
| request, \ |
| USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, \ |
| value, \ |
| pdev->vcinterface, \ |
| &buf, buflen, 500) |
| |
| #define RecvControlMsg(request, value, buflen) \ |
| usb_control_msg(pdev->udev, usb_rcvctrlpipe(pdev->udev, 0), \ |
| request, \ |
| USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, \ |
| value, \ |
| pdev->vcinterface, \ |
| &buf, buflen, 500) |
| |
| |
| static int send_video_command(struct usb_device *udev, int index, void *buf, int buflen) |
| { |
| return usb_control_msg(udev, |
| usb_sndctrlpipe(udev, 0), |
| SET_EP_STREAM_CTL, |
| USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, |
| VIDEO_OUTPUT_CONTROL_FORMATTER, |
| index, |
| buf, buflen, 1000); |
| } |
| |
| |
| |
| static int set_video_mode_Nala(struct pwc_device *pdev, int size, int frames) |
| { |
| unsigned char buf[3]; |
| int ret, fps; |
| struct Nala_table_entry *pEntry; |
| int frames2frames[31] = |
| { /* closest match of framerate */ |
| 0, 0, 0, 0, 4, /* 0-4 */ |
| 5, 5, 7, 7, 10, /* 5-9 */ |
| 10, 10, 12, 12, 15, /* 10-14 */ |
| 15, 15, 15, 20, 20, /* 15-19 */ |
| 20, 20, 20, 24, 24, /* 20-24 */ |
| 24, 24, 24, 24, 24, /* 25-29 */ |
| 24 /* 30 */ |
| }; |
| int frames2table[31] = |
| { 0, 0, 0, 0, 0, /* 0-4 */ |
| 1, 1, 1, 2, 2, /* 5-9 */ |
| 3, 3, 4, 4, 4, /* 10-14 */ |
| 5, 5, 5, 5, 5, /* 15-19 */ |
| 6, 6, 6, 6, 7, /* 20-24 */ |
| 7, 7, 7, 7, 7, /* 25-29 */ |
| 7 /* 30 */ |
| }; |
| |
| if (size < 0 || size > PSZ_CIF || frames < 4 || frames > 25) |
| return -EINVAL; |
| frames = frames2frames[frames]; |
| fps = frames2table[frames]; |
| pEntry = &Nala_table[size][fps]; |
| if (pEntry->alternate == 0) |
| return -EINVAL; |
| |
| memcpy(buf, pEntry->mode, 3); |
| ret = send_video_command(pdev->udev, pdev->vendpoint, buf, 3); |
| if (ret < 0) { |
| PWC_DEBUG_MODULE("Failed to send video command... %d\n", ret); |
| return ret; |
| } |
| if (pEntry->compressed && pdev->vpalette != VIDEO_PALETTE_RAW) |
| pwc_dec1_init(pdev->type, pdev->release, buf, pdev->decompress_data); |
| |
| pdev->cmd_len = 3; |
| memcpy(pdev->cmd_buf, buf, 3); |
| |
| /* Set various parameters */ |
| pdev->vframes = frames; |
| pdev->vsize = size; |
| pdev->valternate = pEntry->alternate; |
| pdev->image = pwc_image_sizes[size]; |
| pdev->frame_size = (pdev->image.x * pdev->image.y * 3) / 2; |
| if (pEntry->compressed) { |
| if (pdev->release < 5) { /* 4 fold compression */ |
| pdev->vbandlength = 528; |
| pdev->frame_size /= 4; |
| } |
| else { |
| pdev->vbandlength = 704; |
| pdev->frame_size /= 3; |
| } |
| } |
| else |
| pdev->vbandlength = 0; |
| return 0; |
| } |
| |
| |
| static int set_video_mode_Timon(struct pwc_device *pdev, int size, int frames, int compression, int snapshot) |
| { |
| unsigned char buf[13]; |
| const struct Timon_table_entry *pChoose; |
| int ret, fps; |
| |
| if (size >= PSZ_MAX || frames < 5 || frames > 30 || compression < 0 || compression > 3) |
| return -EINVAL; |
| if (size == PSZ_VGA && frames > 15) |
| return -EINVAL; |
| fps = (frames / 5) - 1; |
| |
| /* Find a supported framerate with progressively higher compression ratios |
| if the preferred ratio is not available. |
| */ |
| pChoose = NULL; |
| while (compression <= 3) { |
| pChoose = &Timon_table[size][fps][compression]; |
| if (pChoose->alternate != 0) |
| break; |
| compression++; |
| } |
| if (pChoose == NULL || pChoose->alternate == 0) |
| return -ENOENT; /* Not supported. */ |
| |
| memcpy(buf, pChoose->mode, 13); |
| if (snapshot) |
| buf[0] |= 0x80; |
| ret = send_video_command(pdev->udev, pdev->vendpoint, buf, 13); |
| if (ret < 0) |
| return ret; |
| |
| if (pChoose->bandlength > 0 && pdev->vpalette != VIDEO_PALETTE_RAW) |
| pwc_dec23_init(pdev, pdev->type, buf); |
| |
| pdev->cmd_len = 13; |
| memcpy(pdev->cmd_buf, buf, 13); |
| |
| /* Set various parameters */ |
| pdev->vframes = frames; |
| pdev->vsize = size; |
| pdev->vsnapshot = snapshot; |
| pdev->valternate = pChoose->alternate; |
| pdev->image = pwc_image_sizes[size]; |
| pdev->vbandlength = pChoose->bandlength; |
| if (pChoose->bandlength > 0) |
| pdev->frame_size = (pChoose->bandlength * pdev->image.y) / 4; |
| else |
| pdev->frame_size = (pdev->image.x * pdev->image.y * 12) / 8; |
| return 0; |
| } |
| |
| |
| static int set_video_mode_Kiara(struct pwc_device *pdev, int size, int frames, int compression, int snapshot) |
| { |
| const struct Kiara_table_entry *pChoose = NULL; |
| int fps, ret; |
| unsigned char buf[12]; |
| struct Kiara_table_entry RawEntry = {6, 773, 1272, {0xAD, 0xF4, 0x10, 0x27, 0xB6, 0x24, 0x96, 0x02, 0x30, 0x05, 0x03, 0x80}}; |
| |
| if (size >= PSZ_MAX || frames < 5 || frames > 30 || compression < 0 || compression > 3) |
| return -EINVAL; |
| if (size == PSZ_VGA && frames > 15) |
| return -EINVAL; |
| fps = (frames / 5) - 1; |
| |
| /* special case: VGA @ 5 fps and snapshot is raw bayer mode */ |
| if (size == PSZ_VGA && frames == 5 && snapshot && pdev->vpalette == VIDEO_PALETTE_RAW) |
| { |
| /* Only available in case the raw palette is selected or |
| we have the decompressor available. This mode is |
| only available in compressed form |
| */ |
| PWC_DEBUG_SIZE("Choosing VGA/5 BAYER mode.\n"); |
| pChoose = &RawEntry; |
| } |
| else |
| { |
| /* Find a supported framerate with progressively higher compression ratios |
| if the preferred ratio is not available. |
| Skip this step when using RAW modes. |
| */ |
| snapshot = 0; |
| while (compression <= 3) { |
| pChoose = &Kiara_table[size][fps][compression]; |
| if (pChoose->alternate != 0) |
| break; |
| compression++; |
| } |
| } |
| if (pChoose == NULL || pChoose->alternate == 0) |
| return -ENOENT; /* Not supported. */ |
| |
| PWC_TRACE("Using alternate setting %d.\n", pChoose->alternate); |
| |
| /* usb_control_msg won't take staticly allocated arrays as argument?? */ |
| memcpy(buf, pChoose->mode, 12); |
| if (snapshot) |
| buf[0] |= 0x80; |
| |
| /* Firmware bug: video endpoint is 5, but commands are sent to endpoint 4 */ |
| ret = send_video_command(pdev->udev, 4 /* pdev->vendpoint */, buf, 12); |
| if (ret < 0) |
| return ret; |
| |
| if (pChoose->bandlength > 0 && pdev->vpalette != VIDEO_PALETTE_RAW) |
| pwc_dec23_init(pdev, pdev->type, buf); |
| |
| pdev->cmd_len = 12; |
| memcpy(pdev->cmd_buf, buf, 12); |
| /* All set and go */ |
| pdev->vframes = frames; |
| pdev->vsize = size; |
| pdev->vsnapshot = snapshot; |
| pdev->valternate = pChoose->alternate; |
| pdev->image = pwc_image_sizes[size]; |
| pdev->vbandlength = pChoose->bandlength; |
| if (pdev->vbandlength > 0) |
| pdev->frame_size = (pdev->vbandlength * pdev->image.y) / 4; |
| else |
| pdev->frame_size = (pdev->image.x * pdev->image.y * 12) / 8; |
| PWC_TRACE("frame_size=%d, vframes=%d, vsize=%d, vsnapshot=%d, vbandlength=%d\n", |
| pdev->frame_size,pdev->vframes,pdev->vsize,pdev->vsnapshot,pdev->vbandlength); |
| return 0; |
| } |
| |
| |
| |
| /** |
| @pdev: device structure |
| @width: viewport width |
| @height: viewport height |
| @frame: framerate, in fps |
| @compression: preferred compression ratio |
| @snapshot: snapshot mode or streaming |
| */ |
| int pwc_set_video_mode(struct pwc_device *pdev, int width, int height, int frames, int compression, int snapshot) |
| { |
| int ret, size; |
| |
| PWC_DEBUG_FLOW("set_video_mode(%dx%d @ %d, palette %d).\n", width, height, frames, pdev->vpalette); |
| size = pwc_decode_size(pdev, width, height); |
| if (size < 0) { |
| PWC_DEBUG_MODULE("Could not find suitable size.\n"); |
| return -ERANGE; |
| } |
| PWC_TRACE("decode_size = %d.\n", size); |
| |
| if (DEVICE_USE_CODEC1(pdev->type)) { |
| ret = set_video_mode_Nala(pdev, size, frames); |
| |
| } else if (DEVICE_USE_CODEC3(pdev->type)) { |
| ret = set_video_mode_Kiara(pdev, size, frames, compression, snapshot); |
| |
| } else { |
| ret = set_video_mode_Timon(pdev, size, frames, compression, snapshot); |
| } |
| if (ret < 0) { |
| PWC_ERROR("Failed to set video mode %s@%d fps; return code = %d\n", size2name[size], frames, ret); |
| return ret; |
| } |
| pdev->view.x = width; |
| pdev->view.y = height; |
| pdev->frame_total_size = pdev->frame_size + pdev->frame_header_size + pdev->frame_trailer_size; |
| pwc_set_image_buffer_size(pdev); |
| PWC_DEBUG_SIZE("Set viewport to %dx%d, image size is %dx%d.\n", width, height, pwc_image_sizes[size].x, pwc_image_sizes[size].y); |
| return 0; |
| } |
| |
| static unsigned int pwc_get_fps_Nala(struct pwc_device *pdev, unsigned int index, unsigned int size) |
| { |
| unsigned int i; |
| |
| for (i = 0; i < PWC_FPS_MAX_NALA; i++) { |
| if (Nala_table[size][i].alternate) { |
| if (index--==0) return Nala_fps_vector[i]; |
| } |
| } |
| return 0; |
| } |
| |
| static unsigned int pwc_get_fps_Kiara(struct pwc_device *pdev, unsigned int index, unsigned int size) |
| { |
| unsigned int i; |
| |
| for (i = 0; i < PWC_FPS_MAX_KIARA; i++) { |
| if (Kiara_table[size][i][3].alternate) { |
| if (index--==0) return Kiara_fps_vector[i]; |
| } |
| } |
| return 0; |
| } |
| |
| static unsigned int pwc_get_fps_Timon(struct pwc_device *pdev, unsigned int index, unsigned int size) |
| { |
| unsigned int i; |
| |
| for (i=0; i < PWC_FPS_MAX_TIMON; i++) { |
| if (Timon_table[size][i][3].alternate) { |
| if (index--==0) return Timon_fps_vector[i]; |
| } |
| } |
| return 0; |
| } |
| |
| unsigned int pwc_get_fps(struct pwc_device *pdev, unsigned int index, unsigned int size) |
| { |
| unsigned int ret; |
| |
| if (DEVICE_USE_CODEC1(pdev->type)) { |
| ret = pwc_get_fps_Nala(pdev, index, size); |
| |
| } else if (DEVICE_USE_CODEC3(pdev->type)) { |
| ret = pwc_get_fps_Kiara(pdev, index, size); |
| |
| } else { |
| ret = pwc_get_fps_Timon(pdev, index, size); |
| } |
| |
| return ret; |
| } |
| |
| #define BLACK_Y 0 |
| #define BLACK_U 128 |
| #define BLACK_V 128 |
| |
| static void pwc_set_image_buffer_size(struct pwc_device *pdev) |
| { |
| int i, factor = 0; |
| |
| /* for PALETTE_YUV420P */ |
| switch(pdev->vpalette) |
| { |
| case VIDEO_PALETTE_YUV420P: |
| factor = 6; |
| break; |
| case VIDEO_PALETTE_RAW: |
| factor = 6; /* can be uncompressed YUV420P */ |
| break; |
| } |
| |
| /* Set sizes in bytes */ |
| pdev->image.size = pdev->image.x * pdev->image.y * factor / 4; |
| pdev->view.size = pdev->view.x * pdev->view.y * factor / 4; |
| |
| /* Align offset, or you'll get some very weird results in |
| YUV420 mode... x must be multiple of 4 (to get the Y's in |
| place), and y even (or you'll mixup U & V). This is less of a |
| problem for YUV420P. |
| */ |
| pdev->offset.x = ((pdev->view.x - pdev->image.x) / 2) & 0xFFFC; |
| pdev->offset.y = ((pdev->view.y - pdev->image.y) / 2) & 0xFFFE; |
| |
| /* Fill buffers with black colors */ |
| for (i = 0; i < pwc_mbufs; i++) { |
| unsigned char *p = pdev->image_data + pdev->images[i].offset; |
| memset(p, BLACK_Y, pdev->view.x * pdev->view.y); |
| p += pdev->view.x * pdev->view.y; |
| memset(p, BLACK_U, pdev->view.x * pdev->view.y/4); |
| p += pdev->view.x * pdev->view.y/4; |
| memset(p, BLACK_V, pdev->view.x * pdev->view.y/4); |
| } |
| } |
| |
| |
| |
| /* BRIGHTNESS */ |
| |
| int pwc_get_brightness(struct pwc_device *pdev) |
| { |
| char buf; |
| int ret; |
| |
| ret = RecvControlMsg(GET_LUM_CTL, BRIGHTNESS_FORMATTER, 1); |
| if (ret < 0) |
| return ret; |
| return buf; |
| } |
| |
| int pwc_set_brightness(struct pwc_device *pdev, int value) |
| { |
| char buf; |
| |
| if (value < 0) |
| value = 0; |
| if (value > 0xffff) |
| value = 0xffff; |
| buf = (value >> 9) & 0x7f; |
| return SendControlMsg(SET_LUM_CTL, BRIGHTNESS_FORMATTER, 1); |
| } |
| |
| /* CONTRAST */ |
| |
| int pwc_get_contrast(struct pwc_device *pdev) |
| { |
| char buf; |
| int ret; |
| |
| ret = RecvControlMsg(GET_LUM_CTL, CONTRAST_FORMATTER, 1); |
| if (ret < 0) |
| return ret; |
| return buf; |
| } |
| |
| int pwc_set_contrast(struct pwc_device *pdev, int value) |
| { |
| char buf; |
| |
| if (value < 0) |
| value = 0; |
| if (value > 0xffff) |
| value = 0xffff; |
| buf = (value >> 10) & 0x3f; |
| return SendControlMsg(SET_LUM_CTL, CONTRAST_FORMATTER, 1); |
| } |
| |
| /* GAMMA */ |
| |
| int pwc_get_gamma(struct pwc_device *pdev) |
| { |
| char buf; |
| int ret; |
| |
| ret = RecvControlMsg(GET_LUM_CTL, GAMMA_FORMATTER, 1); |
| if (ret < 0) |
| return ret; |
| return buf; |
| } |
| |
| int pwc_set_gamma(struct pwc_device *pdev, int value) |
| { |
| char buf; |
| |
| if (value < 0) |
| value = 0; |
| if (value > 0xffff) |
| value = 0xffff; |
| buf = (value >> 11) & 0x1f; |
| return SendControlMsg(SET_LUM_CTL, GAMMA_FORMATTER, 1); |
| } |
| |
| |
| /* SATURATION */ |
| |
| /* return a value between [-100 , 100] */ |
| int pwc_get_saturation(struct pwc_device *pdev, int *value) |
| { |
| char buf; |
| int ret, saturation_register; |
| |
| if (pdev->type < 675) |
| return -EINVAL; |
| if (pdev->type < 730) |
| saturation_register = SATURATION_MODE_FORMATTER2; |
| else |
| saturation_register = SATURATION_MODE_FORMATTER1; |
| ret = RecvControlMsg(GET_CHROM_CTL, saturation_register, 1); |
| if (ret < 0) |
| return ret; |
| *value = (signed)buf; |
| return 0; |
| } |
| |
| /* @param value saturation color between [-100 , 100] */ |
| int pwc_set_saturation(struct pwc_device *pdev, int value) |
| { |
| char buf; |
| int saturation_register; |
| |
| if (pdev->type < 675) |
| return -EINVAL; |
| if (value < -100) |
| value = -100; |
| if (value > 100) |
| value = 100; |
| if (pdev->type < 730) |
| saturation_register = SATURATION_MODE_FORMATTER2; |
| else |
| saturation_register = SATURATION_MODE_FORMATTER1; |
| return SendControlMsg(SET_CHROM_CTL, saturation_register, 1); |
| } |
| |
| /* AGC */ |
| |
| int pwc_set_agc(struct pwc_device *pdev, int mode, int value) |
| { |
| char buf; |
| int ret; |
| |
| if (mode) |
| buf = 0x0; /* auto */ |
| else |
| buf = 0xff; /* fixed */ |
| |
| ret = SendControlMsg(SET_LUM_CTL, AGC_MODE_FORMATTER, 1); |
| |
| if (!mode && ret >= 0) { |
| if (value < 0) |
| value = 0; |
| if (value > 0xffff) |
| value = 0xffff; |
| buf = (value >> 10) & 0x3F; |
| ret = SendControlMsg(SET_LUM_CTL, PRESET_AGC_FORMATTER, 1); |
| } |
| if (ret < 0) |
| return ret; |
| return 0; |
| } |
| |
| int pwc_get_agc(struct pwc_device *pdev, int *value) |
| { |
| unsigned char buf; |
| int ret; |
| |
| ret = RecvControlMsg(GET_LUM_CTL, AGC_MODE_FORMATTER, 1); |
| if (ret < 0) |
| return ret; |
| |
| if (buf != 0) { /* fixed */ |
| ret = RecvControlMsg(GET_LUM_CTL, PRESET_AGC_FORMATTER, 1); |
| if (ret < 0) |
| return ret; |
| if (buf > 0x3F) |
| buf = 0x3F; |
| *value = (buf << 10); |
| } |
| else { /* auto */ |
| ret = RecvControlMsg(GET_STATUS_CTL, READ_AGC_FORMATTER, 1); |
| if (ret < 0) |
| return ret; |
| /* Gah... this value ranges from 0x00 ... 0x9F */ |
| if (buf > 0x9F) |
| buf = 0x9F; |
| *value = -(48 + buf * 409); |
| } |
| |
| return 0; |
| } |
| |
| int pwc_set_shutter_speed(struct pwc_device *pdev, int mode, int value) |
| { |
| char buf[2]; |
| int speed, ret; |
| |
| |
| if (mode) |
| buf[0] = 0x0; /* auto */ |
| else |
| buf[0] = 0xff; /* fixed */ |
| |
| ret = SendControlMsg(SET_LUM_CTL, SHUTTER_MODE_FORMATTER, 1); |
| |
| if (!mode && ret >= 0) { |
| if (value < 0) |
| value = 0; |
| if (value > 0xffff) |
| value = 0xffff; |
| |
| if (DEVICE_USE_CODEC2(pdev->type)) { |
| /* speed ranges from 0x0 to 0x290 (656) */ |
| speed = (value / 100); |
| buf[1] = speed >> 8; |
| buf[0] = speed & 0xff; |
| } else if (DEVICE_USE_CODEC3(pdev->type)) { |
| /* speed seems to range from 0x0 to 0xff */ |
| buf[1] = 0; |
| buf[0] = value >> 8; |
| } |
| |
| ret = SendControlMsg(SET_LUM_CTL, PRESET_SHUTTER_FORMATTER, 2); |
| } |
| return ret; |
| } |
| |
| /* This function is not exported to v4l1, so output values between 0 -> 256 */ |
| int pwc_get_shutter_speed(struct pwc_device *pdev, int *value) |
| { |
| unsigned char buf[2]; |
| int ret; |
| |
| ret = RecvControlMsg(GET_STATUS_CTL, READ_SHUTTER_FORMATTER, 2); |
| if (ret < 0) |
| return ret; |
| *value = buf[0] + (buf[1] << 8); |
| if (DEVICE_USE_CODEC2(pdev->type)) { |
| /* speed ranges from 0x0 to 0x290 (656) */ |
| *value *= 256/656; |
| } else if (DEVICE_USE_CODEC3(pdev->type)) { |
| /* speed seems to range from 0x0 to 0xff */ |
| } |
| return 0; |
| } |
| |
| |
| /* POWER */ |
| |
| int pwc_camera_power(struct pwc_device *pdev, int power) |
| { |
| char buf; |
| |
| if (pdev->type < 675 || (pdev->type < 730 && pdev->release < 6)) |
| return 0; /* Not supported by Nala or Timon < release 6 */ |
| |
| if (power) |
| buf = 0x00; /* active */ |
| else |
| buf = 0xFF; /* power save */ |
| return SendControlMsg(SET_STATUS_CTL, SET_POWER_SAVE_MODE_FORMATTER, 1); |
| } |
| |
| |
| |
| /* private calls */ |
| |
| int pwc_restore_user(struct pwc_device *pdev) |
| { |
| char buf; /* dummy */ |
| return SendControlMsg(SET_STATUS_CTL, RESTORE_USER_DEFAULTS_FORMATTER, 0); |
| } |
| |
| int pwc_save_user(struct pwc_device *pdev) |
| { |
| char buf; /* dummy */ |
| return SendControlMsg(SET_STATUS_CTL, SAVE_USER_DEFAULTS_FORMATTER, 0); |
| } |
| |
| int pwc_restore_factory(struct pwc_device *pdev) |
| { |
| char buf; /* dummy */ |
| return SendControlMsg(SET_STATUS_CTL, RESTORE_FACTORY_DEFAULTS_FORMATTER, 0); |
| } |
| |
| /* ************************************************* */ |
| /* Patch by Alvarado: (not in the original version */ |
| |
| /* |
| * the camera recognizes modes from 0 to 4: |
| * |
| * 00: indoor (incandescant lighting) |
| * 01: outdoor (sunlight) |
| * 02: fluorescent lighting |
| * 03: manual |
| * 04: auto |
| */ |
| int pwc_set_awb(struct pwc_device *pdev, int mode) |
| { |
| char buf; |
| int ret; |
| |
| if (mode < 0) |
| mode = 0; |
| |
| if (mode > 4) |
| mode = 4; |
| |
| buf = mode & 0x07; /* just the lowest three bits */ |
| |
| ret = SendControlMsg(SET_CHROM_CTL, WB_MODE_FORMATTER, 1); |
| |
| if (ret < 0) |
| return ret; |
| return 0; |
| } |
| |
| int pwc_get_awb(struct pwc_device *pdev) |
| { |
| unsigned char buf; |
| int ret; |
| |
| ret = RecvControlMsg(GET_CHROM_CTL, WB_MODE_FORMATTER, 1); |
| |
| if (ret < 0) |
| return ret; |
| return buf; |
| } |
| |
| int pwc_set_red_gain(struct pwc_device *pdev, int value) |
| { |
| unsigned char buf; |
| |
| if (value < 0) |
| value = 0; |
| if (value > 0xffff) |
| value = 0xffff; |
| /* only the msb is considered */ |
| buf = value >> 8; |
| return SendControlMsg(SET_CHROM_CTL, PRESET_MANUAL_RED_GAIN_FORMATTER, 1); |
| } |
| |
| int pwc_get_red_gain(struct pwc_device *pdev, int *value) |
| { |
| unsigned char buf; |
| int ret; |
| |
| ret = RecvControlMsg(GET_CHROM_CTL, PRESET_MANUAL_RED_GAIN_FORMATTER, 1); |
| if (ret < 0) |
| return ret; |
| *value = buf << 8; |
| return 0; |
| } |
| |
| |
| int pwc_set_blue_gain(struct pwc_device *pdev, int value) |
| { |
| unsigned char buf; |
| |
| if (value < 0) |
| value = 0; |
| if (value > 0xffff) |
| value = 0xffff; |
| /* only the msb is considered */ |
| buf = value >> 8; |
| return SendControlMsg(SET_CHROM_CTL, PRESET_MANUAL_BLUE_GAIN_FORMATTER, 1); |
| } |
| |
| int pwc_get_blue_gain(struct pwc_device *pdev, int *value) |
| { |
| unsigned char buf; |
| int ret; |
| |
| ret = RecvControlMsg(GET_CHROM_CTL, PRESET_MANUAL_BLUE_GAIN_FORMATTER, 1); |
| if (ret < 0) |
| return ret; |
| *value = buf << 8; |
| return 0; |
| } |
| |
| |
| /* The following two functions are different, since they only read the |
| internal red/blue gains, which may be different from the manual |
| gains set or read above. |
| */ |
| static int pwc_read_red_gain(struct pwc_device *pdev, int *value) |
| { |
| unsigned char buf; |
| int ret; |
| |
| ret = RecvControlMsg(GET_STATUS_CTL, READ_RED_GAIN_FORMATTER, 1); |
| if (ret < 0) |
| return ret; |
| *value = buf << 8; |
| return 0; |
| } |
| |
| static int pwc_read_blue_gain(struct pwc_device *pdev, int *value) |
| { |
| unsigned char buf; |
| int ret; |
| |
| ret = RecvControlMsg(GET_STATUS_CTL, READ_BLUE_GAIN_FORMATTER, 1); |
| if (ret < 0) |
| return ret; |
| *value = buf << 8; |
| return 0; |
| } |
| |
| |
| static int pwc_set_wb_speed(struct pwc_device *pdev, int speed) |
| { |
| unsigned char buf; |
| |
| /* useful range is 0x01..0x20 */ |
| buf = speed / 0x7f0; |
| return SendControlMsg(SET_CHROM_CTL, AWB_CONTROL_SPEED_FORMATTER, 1); |
| } |
| |
| static int pwc_get_wb_speed(struct pwc_device *pdev, int *value) |
| { |
| unsigned char buf; |
| int ret; |
| |
| ret = RecvControlMsg(GET_CHROM_CTL, AWB_CONTROL_SPEED_FORMATTER, 1); |
| if (ret < 0) |
| return ret; |
| *value = buf * 0x7f0; |
| return 0; |
| } |
| |
| |
| static int pwc_set_wb_delay(struct pwc_device *pdev, int delay) |
| { |
| unsigned char buf; |
| |
| /* useful range is 0x01..0x3F */ |
| buf = (delay >> 10); |
| return SendControlMsg(SET_CHROM_CTL, AWB_CONTROL_DELAY_FORMATTER, 1); |
| } |
| |
| static int pwc_get_wb_delay(struct pwc_device *pdev, int *value) |
| { |
| unsigned char buf; |
| int ret; |
| |
| ret = RecvControlMsg(GET_CHROM_CTL, AWB_CONTROL_DELAY_FORMATTER, 1); |
| if (ret < 0) |
| return ret; |
| *value = buf << 10; |
| return 0; |
| } |
| |
| |
| int pwc_set_leds(struct pwc_device *pdev, int on_value, int off_value) |
| { |
| unsigned char buf[2]; |
| |
| if (pdev->type < 730) |
| return 0; |
| on_value /= 100; |
| off_value /= 100; |
| if (on_value < 0) |
| on_value = 0; |
| if (on_value > 0xff) |
| on_value = 0xff; |
| if (off_value < 0) |
| off_value = 0; |
| if (off_value > 0xff) |
| off_value = 0xff; |
| |
| buf[0] = on_value; |
| buf[1] = off_value; |
| |
| return SendControlMsg(SET_STATUS_CTL, LED_FORMATTER, 2); |
| } |
| |
| static int pwc_get_leds(struct pwc_device *pdev, int *on_value, int *off_value) |
| { |
| unsigned char buf[2]; |
| int ret; |
| |
| if (pdev->type < 730) { |
| *on_value = -1; |
| *off_value = -1; |
| return 0; |
| } |
| |
| ret = RecvControlMsg(GET_STATUS_CTL, LED_FORMATTER, 2); |
| if (ret < 0) |
| return ret; |
| *on_value = buf[0] * 100; |
| *off_value = buf[1] * 100; |
| return 0; |
| } |
| |
| int pwc_set_contour(struct pwc_device *pdev, int contour) |
| { |
| unsigned char buf; |
| int ret; |
| |
| if (contour < 0) |
| buf = 0xff; /* auto contour on */ |
| else |
| buf = 0x0; /* auto contour off */ |
| ret = SendControlMsg(SET_LUM_CTL, AUTO_CONTOUR_FORMATTER, 1); |
| if (ret < 0) |
| return ret; |
| |
| if (contour < 0) |
| return 0; |
| if (contour > 0xffff) |
| contour = 0xffff; |
| |
| buf = (contour >> 10); /* contour preset is [0..3f] */ |
| ret = SendControlMsg(SET_LUM_CTL, PRESET_CONTOUR_FORMATTER, 1); |
| if (ret < 0) |
| return ret; |
| return 0; |
| } |
| |
| int pwc_get_contour(struct pwc_device *pdev, int *contour) |
| { |
| unsigned char buf; |
| int ret; |
| |
| ret = RecvControlMsg(GET_LUM_CTL, AUTO_CONTOUR_FORMATTER, 1); |
| if (ret < 0) |
| return ret; |
| |
| if (buf == 0) { |
| /* auto mode off, query current preset value */ |
| ret = RecvControlMsg(GET_LUM_CTL, PRESET_CONTOUR_FORMATTER, 1); |
| if (ret < 0) |
| return ret; |
| *contour = buf << 10; |
| } |
| else |
| *contour = -1; |
| return 0; |
| } |
| |
| |
| int pwc_set_backlight(struct pwc_device *pdev, int backlight) |
| { |
| unsigned char buf; |
| |
| if (backlight) |
| buf = 0xff; |
| else |
| buf = 0x0; |
| return SendControlMsg(SET_LUM_CTL, BACK_LIGHT_COMPENSATION_FORMATTER, 1); |
| } |
| |
| int pwc_get_backlight(struct pwc_device *pdev, int *backlight) |
| { |
| int ret; |
| unsigned char buf; |
| |
| ret = RecvControlMsg(GET_LUM_CTL, BACK_LIGHT_COMPENSATION_FORMATTER, 1); |
| if (ret < 0) |
| return ret; |
| *backlight = !!buf; |
| return 0; |
| } |
| |
| int pwc_set_colour_mode(struct pwc_device *pdev, int colour) |
| { |
| unsigned char buf; |
| |
| if (colour) |
| buf = 0xff; |
| else |
| buf = 0x0; |
| return SendControlMsg(SET_CHROM_CTL, COLOUR_MODE_FORMATTER, 1); |
| } |
| |
| int pwc_get_colour_mode(struct pwc_device *pdev, int *colour) |
| { |
| int ret; |
| unsigned char buf; |
| |
| ret = RecvControlMsg(GET_CHROM_CTL, COLOUR_MODE_FORMATTER, 1); |
| if (ret < 0) |
| return ret; |
| *colour = !!buf; |
| return 0; |
| } |
| |
| |
| int pwc_set_flicker(struct pwc_device *pdev, int flicker) |
| { |
| unsigned char buf; |
| |
| if (flicker) |
| buf = 0xff; |
| else |
| buf = 0x0; |
| return SendControlMsg(SET_LUM_CTL, FLICKERLESS_MODE_FORMATTER, 1); |
| } |
| |
| int pwc_get_flicker(struct pwc_device *pdev, int *flicker) |
| { |
| int ret; |
| unsigned char buf; |
| |
| ret = RecvControlMsg(GET_LUM_CTL, FLICKERLESS_MODE_FORMATTER, 1); |
| if (ret < 0) |
| return ret; |
| *flicker = !!buf; |
| return 0; |
| } |
| |
| int pwc_set_dynamic_noise(struct pwc_device *pdev, int noise) |
| { |
| unsigned char buf; |
| |
| if (noise < 0) |
| noise = 0; |
| if (noise > 3) |
| noise = 3; |
| buf = noise; |
| return SendControlMsg(SET_LUM_CTL, DYNAMIC_NOISE_CONTROL_FORMATTER, 1); |
| } |
| |
| int pwc_get_dynamic_noise(struct pwc_device *pdev, int *noise) |
| { |
| int ret; |
| unsigned char buf; |
| |
| ret = RecvControlMsg(GET_LUM_CTL, DYNAMIC_NOISE_CONTROL_FORMATTER, 1); |
| if (ret < 0) |
| return ret; |
| *noise = buf; |
| return 0; |
| } |
| |
| static int _pwc_mpt_reset(struct pwc_device *pdev, int flags) |
| { |
| unsigned char buf; |
| |
| buf = flags & 0x03; // only lower two bits are currently used |
| return SendControlMsg(SET_MPT_CTL, PT_RESET_CONTROL_FORMATTER, 1); |
| } |
| |
| int pwc_mpt_reset(struct pwc_device *pdev, int flags) |
| { |
| int ret; |
| ret = _pwc_mpt_reset(pdev, flags); |
| if (ret >= 0) { |
| pdev->pan_angle = 0; |
| pdev->tilt_angle = 0; |
| } |
| return ret; |
| } |
| |
| static int _pwc_mpt_set_angle(struct pwc_device *pdev, int pan, int tilt) |
| { |
| unsigned char buf[4]; |
| |
| /* set new relative angle; angles are expressed in degrees * 100, |
| but cam as .5 degree resolution, hence divide by 200. Also |
| the angle must be multiplied by 64 before it's send to |
| the cam (??) |
| */ |
| pan = 64 * pan / 100; |
| tilt = -64 * tilt / 100; /* positive tilt is down, which is not what the user would expect */ |
| buf[0] = pan & 0xFF; |
| buf[1] = (pan >> 8) & 0xFF; |
| buf[2] = tilt & 0xFF; |
| buf[3] = (tilt >> 8) & 0xFF; |
| return SendControlMsg(SET_MPT_CTL, PT_RELATIVE_CONTROL_FORMATTER, 4); |
| } |
| |
| int pwc_mpt_set_angle(struct pwc_device *pdev, int pan, int tilt) |
| { |
| int ret; |
| |
| /* check absolute ranges */ |
| if (pan < pdev->angle_range.pan_min || |
| pan > pdev->angle_range.pan_max || |
| tilt < pdev->angle_range.tilt_min || |
| tilt > pdev->angle_range.tilt_max) |
| return -ERANGE; |
| |
| /* go to relative range, check again */ |
| pan -= pdev->pan_angle; |
| tilt -= pdev->tilt_angle; |
| /* angles are specified in degrees * 100, thus the limit = 36000 */ |
| if (pan < -36000 || pan > 36000 || tilt < -36000 || tilt > 36000) |
| return -ERANGE; |
| |
| ret = _pwc_mpt_set_angle(pdev, pan, tilt); |
| if (ret >= 0) { |
| pdev->pan_angle += pan; |
| pdev->tilt_angle += tilt; |
| } |
| if (ret == -EPIPE) /* stall -> out of range */ |
| ret = -ERANGE; |
| return ret; |
| } |
| |
| static int pwc_mpt_get_status(struct pwc_device *pdev, struct pwc_mpt_status *status) |
| { |
| int ret; |
| unsigned char buf[5]; |
| |
| ret = RecvControlMsg(GET_MPT_CTL, PT_STATUS_FORMATTER, 5); |
| if (ret < 0) |
| return ret; |
| status->status = buf[0] & 0x7; // 3 bits are used for reporting |
| status->time_pan = (buf[1] << 8) + buf[2]; |
| status->time_tilt = (buf[3] << 8) + buf[4]; |
| return 0; |
| } |
| |
| |
| int pwc_get_cmos_sensor(struct pwc_device *pdev, int *sensor) |
| { |
| unsigned char buf; |
| int ret = -1, request; |
| |
| if (pdev->type < 675) |
| request = SENSOR_TYPE_FORMATTER1; |
| else if (pdev->type < 730) |
| return -1; /* The Vesta series doesn't have this call */ |
| else |
| request = SENSOR_TYPE_FORMATTER2; |
| |
| ret = RecvControlMsg(GET_STATUS_CTL, request, 1); |
| if (ret < 0) |
| return ret; |
| if (pdev->type < 675) |
| *sensor = buf | 0x100; |
| else |
| *sensor = buf; |
| return 0; |
| } |
| |
| |
| /* End of Add-Ons */ |
| /* ************************************************* */ |
| |
| /* Linux 2.5.something and 2.6 pass direct pointers to arguments of |
| ioctl() calls. With 2.4, you have to do tedious copy_from_user() |
| and copy_to_user() calls. With these macros we circumvent this, |
| and let me maintain only one source file. The functionality is |
| exactly the same otherwise. |
| */ |
| |
| /* define local variable for arg */ |
| #define ARG_DEF(ARG_type, ARG_name)\ |
| ARG_type *ARG_name = arg; |
| /* copy arg to local variable */ |
| #define ARG_IN(ARG_name) /* nothing */ |
| /* argument itself (referenced) */ |
| #define ARGR(ARG_name) (*ARG_name) |
| /* argument address */ |
| #define ARGA(ARG_name) ARG_name |
| /* copy local variable to arg */ |
| #define ARG_OUT(ARG_name) /* nothing */ |
| |
| int pwc_ioctl(struct pwc_device *pdev, unsigned int cmd, void *arg) |
| { |
| int ret = 0; |
| |
| switch(cmd) { |
| case VIDIOCPWCRUSER: |
| { |
| if (pwc_restore_user(pdev)) |
| ret = -EINVAL; |
| break; |
| } |
| |
| case VIDIOCPWCSUSER: |
| { |
| if (pwc_save_user(pdev)) |
| ret = -EINVAL; |
| break; |
| } |
| |
| case VIDIOCPWCFACTORY: |
| { |
| if (pwc_restore_factory(pdev)) |
| ret = -EINVAL; |
| break; |
| } |
| |
| case VIDIOCPWCSCQUAL: |
| { |
| ARG_DEF(int, qual) |
| |
| ARG_IN(qual) |
| if (ARGR(qual) < 0 || ARGR(qual) > 3) |
| ret = -EINVAL; |
| else |
| ret = pwc_try_video_mode(pdev, pdev->view.x, pdev->view.y, pdev->vframes, ARGR(qual), pdev->vsnapshot); |
| if (ret >= 0) |
| pdev->vcompression = ARGR(qual); |
| break; |
| } |
| |
| case VIDIOCPWCGCQUAL: |
| { |
| ARG_DEF(int, qual) |
| |
| ARGR(qual) = pdev->vcompression; |
| ARG_OUT(qual) |
| break; |
| } |
| |
| case VIDIOCPWCPROBE: |
| { |
| ARG_DEF(struct pwc_probe, probe) |
| |
| strcpy(ARGR(probe).name, pdev->vdev->name); |
| ARGR(probe).type = pdev->type; |
| ARG_OUT(probe) |
| break; |
| } |
| |
| case VIDIOCPWCGSERIAL: |
| { |
| ARG_DEF(struct pwc_serial, serial) |
| |
| strcpy(ARGR(serial).serial, pdev->serial); |
| ARG_OUT(serial) |
| break; |
| } |
| |
| case VIDIOCPWCSAGC: |
| { |
| ARG_DEF(int, agc) |
| |
| ARG_IN(agc) |
| if (pwc_set_agc(pdev, ARGR(agc) < 0 ? 1 : 0, ARGR(agc))) |
| ret = -EINVAL; |
| break; |
| } |
| |
| case VIDIOCPWCGAGC: |
| { |
| ARG_DEF(int, agc) |
| |
| if (pwc_get_agc(pdev, ARGA(agc))) |
| ret = -EINVAL; |
| ARG_OUT(agc) |
| break; |
| } |
| |
| case VIDIOCPWCSSHUTTER: |
| { |
| ARG_DEF(int, shutter_speed) |
| |
| ARG_IN(shutter_speed) |
| ret = pwc_set_shutter_speed(pdev, ARGR(shutter_speed) < 0 ? 1 : 0, ARGR(shutter_speed)); |
| break; |
| } |
| |
| case VIDIOCPWCSAWB: |
| { |
| ARG_DEF(struct pwc_whitebalance, wb) |
| |
| ARG_IN(wb) |
| ret = pwc_set_awb(pdev, ARGR(wb).mode); |
| if (ret >= 0 && ARGR(wb).mode == PWC_WB_MANUAL) { |
| pwc_set_red_gain(pdev, ARGR(wb).manual_red); |
| pwc_set_blue_gain(pdev, ARGR(wb).manual_blue); |
| } |
| break; |
| } |
| |
| case VIDIOCPWCGAWB: |
| { |
| ARG_DEF(struct pwc_whitebalance, wb) |
| |
| memset(ARGA(wb), 0, sizeof(struct pwc_whitebalance)); |
| ARGR(wb).mode = pwc_get_awb(pdev); |
| if (ARGR(wb).mode < 0) |
| ret = -EINVAL; |
| else { |
| if (ARGR(wb).mode == PWC_WB_MANUAL) { |
| ret = pwc_get_red_gain(pdev, &ARGR(wb).manual_red); |
| if (ret < 0) |
| break; |
| ret = pwc_get_blue_gain(pdev, &ARGR(wb).manual_blue); |
| if (ret < 0) |
| break; |
| } |
| if (ARGR(wb).mode == PWC_WB_AUTO) { |
| ret = pwc_read_red_gain(pdev, &ARGR(wb).read_red); |
| if (ret < 0) |
| break; |
| ret = pwc_read_blue_gain(pdev, &ARGR(wb).read_blue); |
| if (ret < 0) |
| break; |
| } |
| } |
| ARG_OUT(wb) |
| break; |
| } |
| |
| case VIDIOCPWCSAWBSPEED: |
| { |
| ARG_DEF(struct pwc_wb_speed, wbs) |
| |
| if (ARGR(wbs).control_speed > 0) { |
| ret = pwc_set_wb_speed(pdev, ARGR(wbs).control_speed); |
| } |
| if (ARGR(wbs).control_delay > 0) { |
| ret = pwc_set_wb_delay(pdev, ARGR(wbs).control_delay); |
| } |
| break; |
| } |
| |
| case VIDIOCPWCGAWBSPEED: |
| { |
| ARG_DEF(struct pwc_wb_speed, wbs) |
| |
| ret = pwc_get_wb_speed(pdev, &ARGR(wbs).control_speed); |
| if (ret < 0) |
| break; |
| ret = pwc_get_wb_delay(pdev, &ARGR(wbs).control_delay); |
| if (ret < 0) |
| break; |
| ARG_OUT(wbs) |
| break; |
| } |
| |
| case VIDIOCPWCSLED: |
| { |
| ARG_DEF(struct pwc_leds, leds) |
| |
| ARG_IN(leds) |
| ret = pwc_set_leds(pdev, ARGR(leds).led_on, ARGR(leds).led_off); |
| break; |
| } |
| |
| |
| case VIDIOCPWCGLED: |
| { |
| ARG_DEF(struct pwc_leds, leds) |
| |
| ret = pwc_get_leds(pdev, &ARGR(leds).led_on, &ARGR(leds).led_off); |
| ARG_OUT(leds) |
| break; |
| } |
| |
| case VIDIOCPWCSCONTOUR: |
| { |
| ARG_DEF(int, contour) |
| |
| ARG_IN(contour) |
| ret = pwc_set_contour(pdev, ARGR(contour)); |
| break; |
| } |
| |
| case VIDIOCPWCGCONTOUR: |
| { |
| ARG_DEF(int, contour) |
| |
| ret = pwc_get_contour(pdev, ARGA(contour)); |
| ARG_OUT(contour) |
| break; |
| } |
| |
| case VIDIOCPWCSBACKLIGHT: |
| { |
| ARG_DEF(int, backlight) |
| |
| ARG_IN(backlight) |
| ret = pwc_set_backlight(pdev, ARGR(backlight)); |
| break; |
| } |
| |
| case VIDIOCPWCGBACKLIGHT: |
| { |
| ARG_DEF(int, backlight) |
| |
| ret = pwc_get_backlight(pdev, ARGA(backlight)); |
| ARG_OUT(backlight) |
| break; |
| } |
| |
| case VIDIOCPWCSFLICKER: |
| { |
| ARG_DEF(int, flicker) |
| |
| ARG_IN(flicker) |
| ret = pwc_set_flicker(pdev, ARGR(flicker)); |
| break; |
| } |
| |
| case VIDIOCPWCGFLICKER: |
| { |
| ARG_DEF(int, flicker) |
| |
| ret = pwc_get_flicker(pdev, ARGA(flicker)); |
| ARG_OUT(flicker) |
| break; |
| } |
| |
| case VIDIOCPWCSDYNNOISE: |
| { |
| ARG_DEF(int, dynnoise) |
| |
| ARG_IN(dynnoise) |
| ret = pwc_set_dynamic_noise(pdev, ARGR(dynnoise)); |
| break; |
| } |
| |
| case VIDIOCPWCGDYNNOISE: |
| { |
| ARG_DEF(int, dynnoise) |
| |
| ret = pwc_get_dynamic_noise(pdev, ARGA(dynnoise)); |
| ARG_OUT(dynnoise); |
| break; |
| } |
| |
| case VIDIOCPWCGREALSIZE: |
| { |
| ARG_DEF(struct pwc_imagesize, size) |
| |
| ARGR(size).width = pdev->image.x; |
| ARGR(size).height = pdev->image.y; |
| ARG_OUT(size) |
| break; |
| } |
| |
| case VIDIOCPWCMPTRESET: |
| { |
| if (pdev->features & FEATURE_MOTOR_PANTILT) |
| { |
| ARG_DEF(int, flags) |
| |
| ARG_IN(flags) |
| ret = pwc_mpt_reset(pdev, ARGR(flags)); |
| } |
| else |
| { |
| ret = -ENXIO; |
| } |
| break; |
| } |
| |
| case VIDIOCPWCMPTGRANGE: |
| { |
| if (pdev->features & FEATURE_MOTOR_PANTILT) |
| { |
| ARG_DEF(struct pwc_mpt_range, range) |
| |
| ARGR(range) = pdev->angle_range; |
| ARG_OUT(range) |
| } |
| else |
| { |
| ret = -ENXIO; |
| } |
| break; |
| } |
| |
| case VIDIOCPWCMPTSANGLE: |
| { |
| int new_pan, new_tilt; |
| |
| if (pdev->features & FEATURE_MOTOR_PANTILT) |
| { |
| ARG_DEF(struct pwc_mpt_angles, angles) |
| |
| ARG_IN(angles) |
| /* The camera can only set relative angles, so |
| do some calculations when getting an absolute angle . |
| */ |
| if (ARGR(angles).absolute) |
| { |
| new_pan = ARGR(angles).pan; |
| new_tilt = ARGR(angles).tilt; |
| } |
| else |
| { |
| new_pan = pdev->pan_angle + ARGR(angles).pan; |
| new_tilt = pdev->tilt_angle + ARGR(angles).tilt; |
| } |
| ret = pwc_mpt_set_angle(pdev, new_pan, new_tilt); |
| } |
| else |
| { |
| ret = -ENXIO; |
| } |
| break; |
| } |
| |
| case VIDIOCPWCMPTGANGLE: |
| { |
| |
| if (pdev->features & FEATURE_MOTOR_PANTILT) |
| { |
| ARG_DEF(struct pwc_mpt_angles, angles) |
| |
| ARGR(angles).absolute = 1; |
| ARGR(angles).pan = pdev->pan_angle; |
| ARGR(angles).tilt = pdev->tilt_angle; |
| ARG_OUT(angles) |
| } |
| else |
| { |
| ret = -ENXIO; |
| } |
| break; |
| } |
| |
| case VIDIOCPWCMPTSTATUS: |
| { |
| if (pdev->features & FEATURE_MOTOR_PANTILT) |
| { |
| ARG_DEF(struct pwc_mpt_status, status) |
| |
| ret = pwc_mpt_get_status(pdev, ARGA(status)); |
| ARG_OUT(status) |
| } |
| else |
| { |
| ret = -ENXIO; |
| } |
| break; |
| } |
| |
| case VIDIOCPWCGVIDCMD: |
| { |
| ARG_DEF(struct pwc_video_command, cmd); |
| |
| ARGR(cmd).type = pdev->type; |
| ARGR(cmd).release = pdev->release; |
| ARGR(cmd).command_len = pdev->cmd_len; |
| memcpy(&ARGR(cmd).command_buf, pdev->cmd_buf, pdev->cmd_len); |
| ARGR(cmd).bandlength = pdev->vbandlength; |
| ARGR(cmd).frame_size = pdev->frame_size; |
| ARG_OUT(cmd) |
| break; |
| } |
| /* |
| case VIDIOCPWCGVIDTABLE: |
| { |
| ARG_DEF(struct pwc_table_init_buffer, table); |
| ARGR(table).len = pdev->cmd_len; |
| memcpy(&ARGR(table).buffer, pdev->decompress_data, pdev->decompressor->table_size); |
| ARG_OUT(table) |
| break; |
| } |
| */ |
| |
| default: |
| ret = -ENOIOCTLCMD; |
| break; |
| } |
| |
| if (ret > 0) |
| return 0; |
| return ret; |
| } |
| |
| |
| /* vim: set cinoptions= formatoptions=croql cindent shiftwidth=8 tabstop=8: */ |