| /* |
| * omap-dmic.c -- OMAP ASoC DMIC DAI driver |
| * |
| * Copyright (C) 2010 - 2011 Texas Instruments |
| * |
| * Author: David Lambert <dlambert@ti.com> |
| * Misael Lopez Cruz <misael.lopez@ti.com> |
| * Liam Girdwood <lrg@ti.com> |
| * Peter Ujfalusi <peter.ujfalusi@ti.com> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA |
| * 02110-1301 USA |
| * |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/err.h> |
| #include <linux/clk.h> |
| #include <linux/io.h> |
| #include <linux/slab.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/of_device.h> |
| |
| #include <sound/core.h> |
| #include <sound/pcm.h> |
| #include <sound/pcm_params.h> |
| #include <sound/initval.h> |
| #include <sound/soc.h> |
| #include <sound/dmaengine_pcm.h> |
| |
| #include "omap-dmic.h" |
| |
| struct omap_dmic { |
| struct device *dev; |
| void __iomem *io_base; |
| struct clk *fclk; |
| int fclk_freq; |
| int out_freq; |
| int clk_div; |
| int sysclk; |
| int threshold; |
| u32 ch_enabled; |
| bool active; |
| struct mutex mutex; |
| |
| struct snd_dmaengine_dai_dma_data dma_data; |
| unsigned int dma_req; |
| }; |
| |
| static inline void omap_dmic_write(struct omap_dmic *dmic, u16 reg, u32 val) |
| { |
| __raw_writel(val, dmic->io_base + reg); |
| } |
| |
| static inline int omap_dmic_read(struct omap_dmic *dmic, u16 reg) |
| { |
| return __raw_readl(dmic->io_base + reg); |
| } |
| |
| static inline void omap_dmic_start(struct omap_dmic *dmic) |
| { |
| u32 ctrl = omap_dmic_read(dmic, OMAP_DMIC_CTRL_REG); |
| |
| /* Configure DMA controller */ |
| omap_dmic_write(dmic, OMAP_DMIC_DMAENABLE_SET_REG, |
| OMAP_DMIC_DMA_ENABLE); |
| |
| omap_dmic_write(dmic, OMAP_DMIC_CTRL_REG, ctrl | dmic->ch_enabled); |
| } |
| |
| static inline void omap_dmic_stop(struct omap_dmic *dmic) |
| { |
| u32 ctrl = omap_dmic_read(dmic, OMAP_DMIC_CTRL_REG); |
| omap_dmic_write(dmic, OMAP_DMIC_CTRL_REG, |
| ctrl & ~OMAP_DMIC_UP_ENABLE_MASK); |
| |
| /* Disable DMA request generation */ |
| omap_dmic_write(dmic, OMAP_DMIC_DMAENABLE_CLR_REG, |
| OMAP_DMIC_DMA_ENABLE); |
| |
| } |
| |
| static inline int dmic_is_enabled(struct omap_dmic *dmic) |
| { |
| return omap_dmic_read(dmic, OMAP_DMIC_CTRL_REG) & |
| OMAP_DMIC_UP_ENABLE_MASK; |
| } |
| |
| static int omap_dmic_dai_startup(struct snd_pcm_substream *substream, |
| struct snd_soc_dai *dai) |
| { |
| struct omap_dmic *dmic = snd_soc_dai_get_drvdata(dai); |
| int ret = 0; |
| |
| mutex_lock(&dmic->mutex); |
| |
| if (!dai->active) |
| dmic->active = 1; |
| else |
| ret = -EBUSY; |
| |
| mutex_unlock(&dmic->mutex); |
| |
| snd_soc_dai_set_dma_data(dai, substream, &dmic->dma_data); |
| return ret; |
| } |
| |
| static void omap_dmic_dai_shutdown(struct snd_pcm_substream *substream, |
| struct snd_soc_dai *dai) |
| { |
| struct omap_dmic *dmic = snd_soc_dai_get_drvdata(dai); |
| |
| mutex_lock(&dmic->mutex); |
| |
| if (!dai->active) |
| dmic->active = 0; |
| |
| mutex_unlock(&dmic->mutex); |
| } |
| |
| static int omap_dmic_select_divider(struct omap_dmic *dmic, int sample_rate) |
| { |
| int divider = -EINVAL; |
| |
| /* |
| * 192KHz rate is only supported with 19.2MHz/3.84MHz clock |
| * configuration. |
| */ |
| if (sample_rate == 192000) { |
| if (dmic->fclk_freq == 19200000 && dmic->out_freq == 3840000) |
| divider = 0x6; /* Divider: 5 (192KHz sampling rate) */ |
| else |
| dev_err(dmic->dev, |
| "invalid clock configuration for 192KHz\n"); |
| |
| return divider; |
| } |
| |
| switch (dmic->out_freq) { |
| case 1536000: |
| if (dmic->fclk_freq != 24576000) |
| goto div_err; |
| divider = 0x4; /* Divider: 16 */ |
| break; |
| case 2400000: |
| switch (dmic->fclk_freq) { |
| case 12000000: |
| divider = 0x5; /* Divider: 5 */ |
| break; |
| case 19200000: |
| divider = 0x0; /* Divider: 8 */ |
| break; |
| case 24000000: |
| divider = 0x2; /* Divider: 10 */ |
| break; |
| default: |
| goto div_err; |
| } |
| break; |
| case 3072000: |
| if (dmic->fclk_freq != 24576000) |
| goto div_err; |
| divider = 0x3; /* Divider: 8 */ |
| break; |
| case 3840000: |
| if (dmic->fclk_freq != 19200000) |
| goto div_err; |
| divider = 0x1; /* Divider: 5 (96KHz sampling rate) */ |
| break; |
| default: |
| dev_err(dmic->dev, "invalid out frequency: %dHz\n", |
| dmic->out_freq); |
| break; |
| } |
| |
| return divider; |
| |
| div_err: |
| dev_err(dmic->dev, "invalid out frequency %dHz for %dHz input\n", |
| dmic->out_freq, dmic->fclk_freq); |
| return -EINVAL; |
| } |
| |
| static int omap_dmic_dai_hw_params(struct snd_pcm_substream *substream, |
| struct snd_pcm_hw_params *params, |
| struct snd_soc_dai *dai) |
| { |
| struct omap_dmic *dmic = snd_soc_dai_get_drvdata(dai); |
| struct snd_dmaengine_dai_dma_data *dma_data; |
| int channels; |
| |
| dmic->clk_div = omap_dmic_select_divider(dmic, params_rate(params)); |
| if (dmic->clk_div < 0) { |
| dev_err(dmic->dev, "no valid divider for %dHz from %dHz\n", |
| dmic->out_freq, dmic->fclk_freq); |
| return -EINVAL; |
| } |
| |
| dmic->ch_enabled = 0; |
| channels = params_channels(params); |
| switch (channels) { |
| case 6: |
| dmic->ch_enabled |= OMAP_DMIC_UP3_ENABLE; |
| case 4: |
| dmic->ch_enabled |= OMAP_DMIC_UP2_ENABLE; |
| case 2: |
| dmic->ch_enabled |= OMAP_DMIC_UP1_ENABLE; |
| break; |
| default: |
| dev_err(dmic->dev, "invalid number of legacy channels\n"); |
| return -EINVAL; |
| } |
| |
| /* packet size is threshold * channels */ |
| dma_data = snd_soc_dai_get_dma_data(dai, substream); |
| dma_data->maxburst = dmic->threshold * channels; |
| |
| return 0; |
| } |
| |
| static int omap_dmic_dai_prepare(struct snd_pcm_substream *substream, |
| struct snd_soc_dai *dai) |
| { |
| struct omap_dmic *dmic = snd_soc_dai_get_drvdata(dai); |
| u32 ctrl; |
| |
| /* Configure uplink threshold */ |
| omap_dmic_write(dmic, OMAP_DMIC_FIFO_CTRL_REG, dmic->threshold); |
| |
| ctrl = omap_dmic_read(dmic, OMAP_DMIC_CTRL_REG); |
| |
| /* Set dmic out format */ |
| ctrl &= ~(OMAP_DMIC_FORMAT | OMAP_DMIC_POLAR_MASK); |
| ctrl |= (OMAP_DMICOUTFORMAT_LJUST | OMAP_DMIC_POLAR1 | |
| OMAP_DMIC_POLAR2 | OMAP_DMIC_POLAR3); |
| |
| /* Configure dmic clock divider */ |
| ctrl &= ~OMAP_DMIC_CLK_DIV_MASK; |
| ctrl |= OMAP_DMIC_CLK_DIV(dmic->clk_div); |
| |
| omap_dmic_write(dmic, OMAP_DMIC_CTRL_REG, ctrl); |
| |
| omap_dmic_write(dmic, OMAP_DMIC_CTRL_REG, |
| ctrl | OMAP_DMICOUTFORMAT_LJUST | OMAP_DMIC_POLAR1 | |
| OMAP_DMIC_POLAR2 | OMAP_DMIC_POLAR3); |
| |
| return 0; |
| } |
| |
| static int omap_dmic_dai_trigger(struct snd_pcm_substream *substream, |
| int cmd, struct snd_soc_dai *dai) |
| { |
| struct omap_dmic *dmic = snd_soc_dai_get_drvdata(dai); |
| |
| switch (cmd) { |
| case SNDRV_PCM_TRIGGER_START: |
| omap_dmic_start(dmic); |
| break; |
| case SNDRV_PCM_TRIGGER_STOP: |
| omap_dmic_stop(dmic); |
| break; |
| default: |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static int omap_dmic_select_fclk(struct omap_dmic *dmic, int clk_id, |
| unsigned int freq) |
| { |
| struct clk *parent_clk; |
| char *parent_clk_name; |
| int ret = 0; |
| |
| switch (freq) { |
| case 12000000: |
| case 19200000: |
| case 24000000: |
| case 24576000: |
| break; |
| default: |
| dev_err(dmic->dev, "invalid input frequency: %dHz\n", freq); |
| dmic->fclk_freq = 0; |
| return -EINVAL; |
| } |
| |
| if (dmic->sysclk == clk_id) { |
| dmic->fclk_freq = freq; |
| return 0; |
| } |
| |
| /* re-parent not allowed if a stream is ongoing */ |
| if (dmic->active && dmic_is_enabled(dmic)) { |
| dev_err(dmic->dev, "can't re-parent when DMIC active\n"); |
| return -EBUSY; |
| } |
| |
| switch (clk_id) { |
| case OMAP_DMIC_SYSCLK_PAD_CLKS: |
| parent_clk_name = "pad_clks_ck"; |
| break; |
| case OMAP_DMIC_SYSCLK_SLIMBLUS_CLKS: |
| parent_clk_name = "slimbus_clk"; |
| break; |
| case OMAP_DMIC_SYSCLK_SYNC_MUX_CLKS: |
| parent_clk_name = "dmic_sync_mux_ck"; |
| break; |
| default: |
| dev_err(dmic->dev, "fclk clk_id (%d) not supported\n", clk_id); |
| return -EINVAL; |
| } |
| |
| parent_clk = clk_get(dmic->dev, parent_clk_name); |
| if (IS_ERR(parent_clk)) { |
| dev_err(dmic->dev, "can't get %s\n", parent_clk_name); |
| return -ENODEV; |
| } |
| |
| mutex_lock(&dmic->mutex); |
| if (dmic->active) { |
| /* disable clock while reparenting */ |
| pm_runtime_put_sync(dmic->dev); |
| ret = clk_set_parent(dmic->fclk, parent_clk); |
| pm_runtime_get_sync(dmic->dev); |
| } else { |
| ret = clk_set_parent(dmic->fclk, parent_clk); |
| } |
| mutex_unlock(&dmic->mutex); |
| |
| if (ret < 0) { |
| dev_err(dmic->dev, "re-parent failed\n"); |
| goto err_busy; |
| } |
| |
| dmic->sysclk = clk_id; |
| dmic->fclk_freq = freq; |
| |
| err_busy: |
| clk_put(parent_clk); |
| |
| return ret; |
| } |
| |
| static int omap_dmic_select_outclk(struct omap_dmic *dmic, int clk_id, |
| unsigned int freq) |
| { |
| int ret = 0; |
| |
| if (clk_id != OMAP_DMIC_ABE_DMIC_CLK) { |
| dev_err(dmic->dev, "output clk_id (%d) not supported\n", |
| clk_id); |
| return -EINVAL; |
| } |
| |
| switch (freq) { |
| case 1536000: |
| case 2400000: |
| case 3072000: |
| case 3840000: |
| dmic->out_freq = freq; |
| break; |
| default: |
| dev_err(dmic->dev, "invalid out frequency: %dHz\n", freq); |
| dmic->out_freq = 0; |
| ret = -EINVAL; |
| } |
| |
| return ret; |
| } |
| |
| static int omap_dmic_set_dai_sysclk(struct snd_soc_dai *dai, int clk_id, |
| unsigned int freq, int dir) |
| { |
| struct omap_dmic *dmic = snd_soc_dai_get_drvdata(dai); |
| |
| if (dir == SND_SOC_CLOCK_IN) |
| return omap_dmic_select_fclk(dmic, clk_id, freq); |
| else if (dir == SND_SOC_CLOCK_OUT) |
| return omap_dmic_select_outclk(dmic, clk_id, freq); |
| |
| dev_err(dmic->dev, "invalid clock direction (%d)\n", dir); |
| return -EINVAL; |
| } |
| |
| static const struct snd_soc_dai_ops omap_dmic_dai_ops = { |
| .startup = omap_dmic_dai_startup, |
| .shutdown = omap_dmic_dai_shutdown, |
| .hw_params = omap_dmic_dai_hw_params, |
| .prepare = omap_dmic_dai_prepare, |
| .trigger = omap_dmic_dai_trigger, |
| .set_sysclk = omap_dmic_set_dai_sysclk, |
| }; |
| |
| static int omap_dmic_probe(struct snd_soc_dai *dai) |
| { |
| struct omap_dmic *dmic = snd_soc_dai_get_drvdata(dai); |
| |
| pm_runtime_enable(dmic->dev); |
| |
| /* Disable lines while request is ongoing */ |
| pm_runtime_get_sync(dmic->dev); |
| omap_dmic_write(dmic, OMAP_DMIC_CTRL_REG, 0x00); |
| pm_runtime_put_sync(dmic->dev); |
| |
| /* Configure DMIC threshold value */ |
| dmic->threshold = OMAP_DMIC_THRES_MAX - 3; |
| return 0; |
| } |
| |
| static int omap_dmic_remove(struct snd_soc_dai *dai) |
| { |
| struct omap_dmic *dmic = snd_soc_dai_get_drvdata(dai); |
| |
| pm_runtime_disable(dmic->dev); |
| |
| return 0; |
| } |
| |
| static struct snd_soc_dai_driver omap_dmic_dai = { |
| .name = "omap-dmic", |
| .probe = omap_dmic_probe, |
| .remove = omap_dmic_remove, |
| .capture = { |
| .channels_min = 2, |
| .channels_max = 6, |
| .rates = SNDRV_PCM_RATE_96000 | SNDRV_PCM_RATE_192000, |
| .formats = SNDRV_PCM_FMTBIT_S32_LE, |
| .sig_bits = 24, |
| }, |
| .ops = &omap_dmic_dai_ops, |
| }; |
| |
| static const struct snd_soc_component_driver omap_dmic_component = { |
| .name = "omap-dmic", |
| }; |
| |
| static int asoc_dmic_probe(struct platform_device *pdev) |
| { |
| struct omap_dmic *dmic; |
| struct resource *res; |
| int ret; |
| |
| dmic = devm_kzalloc(&pdev->dev, sizeof(struct omap_dmic), GFP_KERNEL); |
| if (!dmic) |
| return -ENOMEM; |
| |
| platform_set_drvdata(pdev, dmic); |
| dmic->dev = &pdev->dev; |
| dmic->sysclk = OMAP_DMIC_SYSCLK_SYNC_MUX_CLKS; |
| |
| mutex_init(&dmic->mutex); |
| |
| dmic->fclk = clk_get(dmic->dev, "fck"); |
| if (IS_ERR(dmic->fclk)) { |
| dev_err(dmic->dev, "cant get fck\n"); |
| return -ENODEV; |
| } |
| |
| res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dma"); |
| if (!res) { |
| dev_err(dmic->dev, "invalid dma memory resource\n"); |
| ret = -ENODEV; |
| goto err_put_clk; |
| } |
| dmic->dma_data.addr = res->start + OMAP_DMIC_DATA_REG; |
| |
| res = platform_get_resource(pdev, IORESOURCE_DMA, 0); |
| if (!res) { |
| dev_err(dmic->dev, "invalid dma resource\n"); |
| ret = -ENODEV; |
| goto err_put_clk; |
| } |
| |
| dmic->dma_req = res->start; |
| dmic->dma_data.filter_data = &dmic->dma_req; |
| |
| res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mpu"); |
| if (!res) { |
| dev_err(dmic->dev, "invalid memory resource\n"); |
| ret = -ENODEV; |
| goto err_put_clk; |
| } |
| |
| dmic->io_base = devm_ioremap_resource(&pdev->dev, res); |
| if (IS_ERR(dmic->io_base)) |
| return PTR_ERR(dmic->io_base); |
| |
| ret = snd_soc_register_component(&pdev->dev, &omap_dmic_component, |
| &omap_dmic_dai, 1); |
| if (ret) |
| goto err_put_clk; |
| |
| return 0; |
| |
| err_put_clk: |
| clk_put(dmic->fclk); |
| return ret; |
| } |
| |
| static int asoc_dmic_remove(struct platform_device *pdev) |
| { |
| struct omap_dmic *dmic = platform_get_drvdata(pdev); |
| |
| snd_soc_unregister_component(&pdev->dev); |
| clk_put(dmic->fclk); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id omap_dmic_of_match[] = { |
| { .compatible = "ti,omap4-dmic", }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, omap_dmic_of_match); |
| |
| static struct platform_driver asoc_dmic_driver = { |
| .driver = { |
| .name = "omap-dmic", |
| .owner = THIS_MODULE, |
| .of_match_table = omap_dmic_of_match, |
| }, |
| .probe = asoc_dmic_probe, |
| .remove = asoc_dmic_remove, |
| }; |
| |
| module_platform_driver(asoc_dmic_driver); |
| |
| MODULE_ALIAS("platform:omap-dmic"); |
| MODULE_AUTHOR("Peter Ujfalusi <peter.ujfalusi@ti.com>"); |
| MODULE_DESCRIPTION("OMAP DMIC ASoC Interface"); |
| MODULE_LICENSE("GPL"); |