| /* |
| * Dallas Semiconductor DS1682 Elapsed Time Recorder device driver |
| * |
| * Written by: Grant Likely <grant.likely@secretlab.ca> |
| * |
| * Copyright (C) 2007 Secret Lab Technologies Ltd. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| /* |
| * The DS1682 elapsed timer recorder is a simple device that implements |
| * one elapsed time counter, one event counter, an alarm signal and 10 |
| * bytes of general purpose EEPROM. |
| * |
| * This driver provides access to the DS1682 counters and user data via |
| * the sysfs. The following attributes are added to the device node: |
| * elapsed_time (u32): Total elapsed event time in ms resolution |
| * alarm_time (u32): When elapsed time exceeds the value in alarm_time, |
| * then the alarm pin is asserted. |
| * event_count (u16): number of times the event pin has gone low. |
| * eeprom (u8[10]): general purpose EEPROM |
| * |
| * Counter registers and user data are both read/write unless the device |
| * has been write protected. This driver does not support turning off write |
| * protection. Once write protection is turned on, it is impossible to |
| * turn it off again, so I have left the feature out of this driver to avoid |
| * accidental enabling, but it is trivial to add write protect support. |
| * |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/slab.h> |
| #include <linux/i2c.h> |
| #include <linux/string.h> |
| #include <linux/list.h> |
| #include <linux/sysfs.h> |
| #include <linux/ctype.h> |
| #include <linux/hwmon-sysfs.h> |
| |
| /* Device registers */ |
| #define DS1682_REG_CONFIG 0x00 |
| #define DS1682_REG_ALARM 0x01 |
| #define DS1682_REG_ELAPSED 0x05 |
| #define DS1682_REG_EVT_CNTR 0x09 |
| #define DS1682_REG_EEPROM 0x0b |
| #define DS1682_REG_RESET 0x1d |
| #define DS1682_REG_WRITE_DISABLE 0x1e |
| #define DS1682_REG_WRITE_MEM_DISABLE 0x1f |
| |
| #define DS1682_EEPROM_SIZE 10 |
| |
| /* |
| * Generic counter attributes |
| */ |
| static ssize_t ds1682_show(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); |
| struct i2c_client *client = to_i2c_client(dev); |
| __le32 val = 0; |
| int rc; |
| |
| dev_dbg(dev, "ds1682_show() called on %s\n", attr->attr.name); |
| |
| /* Read the register */ |
| rc = i2c_smbus_read_i2c_block_data(client, sattr->index, sattr->nr, |
| (u8 *) & val); |
| if (rc < 0) |
| return -EIO; |
| |
| /* Special case: the 32 bit regs are time values with 1/4s |
| * resolution, scale them up to milliseconds */ |
| if (sattr->nr == 4) |
| return sprintf(buf, "%llu\n", ((u64) le32_to_cpu(val)) * 250); |
| |
| /* Format the output string and return # of bytes */ |
| return sprintf(buf, "%li\n", (long)le32_to_cpu(val)); |
| } |
| |
| static ssize_t ds1682_store(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); |
| struct i2c_client *client = to_i2c_client(dev); |
| char *endp; |
| u64 val; |
| __le32 val_le; |
| int rc; |
| |
| dev_dbg(dev, "ds1682_store() called on %s\n", attr->attr.name); |
| |
| /* Decode input */ |
| val = simple_strtoull(buf, &endp, 0); |
| if (buf == endp) { |
| dev_dbg(dev, "input string not a number\n"); |
| return -EINVAL; |
| } |
| |
| /* Special case: the 32 bit regs are time values with 1/4s |
| * resolution, scale input down to quarter-seconds */ |
| if (sattr->nr == 4) |
| do_div(val, 250); |
| |
| /* write out the value */ |
| val_le = cpu_to_le32(val); |
| rc = i2c_smbus_write_i2c_block_data(client, sattr->index, sattr->nr, |
| (u8 *) & val_le); |
| if (rc < 0) { |
| dev_err(dev, "register write failed; reg=0x%x, size=%i\n", |
| sattr->index, sattr->nr); |
| return -EIO; |
| } |
| |
| return count; |
| } |
| |
| /* |
| * Simple register attributes |
| */ |
| static SENSOR_DEVICE_ATTR_2(elapsed_time, S_IRUGO | S_IWUSR, ds1682_show, |
| ds1682_store, 4, DS1682_REG_ELAPSED); |
| static SENSOR_DEVICE_ATTR_2(alarm_time, S_IRUGO | S_IWUSR, ds1682_show, |
| ds1682_store, 4, DS1682_REG_ALARM); |
| static SENSOR_DEVICE_ATTR_2(event_count, S_IRUGO | S_IWUSR, ds1682_show, |
| ds1682_store, 2, DS1682_REG_EVT_CNTR); |
| |
| static const struct attribute_group ds1682_group = { |
| .attrs = (struct attribute *[]) { |
| &sensor_dev_attr_elapsed_time.dev_attr.attr, |
| &sensor_dev_attr_alarm_time.dev_attr.attr, |
| &sensor_dev_attr_event_count.dev_attr.attr, |
| NULL, |
| }, |
| }; |
| |
| /* |
| * User data attribute |
| */ |
| static ssize_t ds1682_eeprom_read(struct kobject *kobj, struct bin_attribute *attr, |
| char *buf, loff_t off, size_t count) |
| { |
| struct i2c_client *client = kobj_to_i2c_client(kobj); |
| int rc; |
| |
| dev_dbg(&client->dev, "ds1682_eeprom_read(p=%p, off=%lli, c=%zi)\n", |
| buf, off, count); |
| |
| if (off >= DS1682_EEPROM_SIZE) |
| return 0; |
| |
| if (off + count > DS1682_EEPROM_SIZE) |
| count = DS1682_EEPROM_SIZE - off; |
| |
| rc = i2c_smbus_read_i2c_block_data(client, DS1682_REG_EEPROM + off, |
| count, buf); |
| if (rc < 0) |
| return -EIO; |
| |
| return count; |
| } |
| |
| static ssize_t ds1682_eeprom_write(struct kobject *kobj, struct bin_attribute *attr, |
| char *buf, loff_t off, size_t count) |
| { |
| struct i2c_client *client = kobj_to_i2c_client(kobj); |
| |
| dev_dbg(&client->dev, "ds1682_eeprom_write(p=%p, off=%lli, c=%zi)\n", |
| buf, off, count); |
| |
| if (off >= DS1682_EEPROM_SIZE) |
| return -ENOSPC; |
| |
| if (off + count > DS1682_EEPROM_SIZE) |
| count = DS1682_EEPROM_SIZE - off; |
| |
| /* Write out to the device */ |
| if (i2c_smbus_write_i2c_block_data(client, DS1682_REG_EEPROM + off, |
| count, buf) < 0) |
| return -EIO; |
| |
| return count; |
| } |
| |
| static struct bin_attribute ds1682_eeprom_attr = { |
| .attr = { |
| .name = "eeprom", |
| .mode = S_IRUGO | S_IWUSR, |
| .owner = THIS_MODULE, |
| }, |
| .size = DS1682_EEPROM_SIZE, |
| .read = ds1682_eeprom_read, |
| .write = ds1682_eeprom_write, |
| }; |
| |
| /* |
| * Called when a ds1682 device is matched with this driver |
| */ |
| static int ds1682_probe(struct i2c_client *client) |
| { |
| int rc; |
| |
| if (!i2c_check_functionality(client->adapter, |
| I2C_FUNC_SMBUS_I2C_BLOCK)) { |
| dev_err(&client->dev, "i2c bus does not support the ds1682\n"); |
| rc = -ENODEV; |
| goto exit; |
| } |
| |
| rc = sysfs_create_group(&client->dev.kobj, &ds1682_group); |
| if (rc) |
| goto exit; |
| |
| rc = sysfs_create_bin_file(&client->dev.kobj, &ds1682_eeprom_attr); |
| if (rc) |
| goto exit_bin_attr; |
| |
| return 0; |
| |
| exit_bin_attr: |
| sysfs_remove_group(&client->dev.kobj, &ds1682_group); |
| exit: |
| return rc; |
| } |
| |
| static int ds1682_remove(struct i2c_client *client) |
| { |
| sysfs_remove_bin_file(&client->dev.kobj, &ds1682_eeprom_attr); |
| sysfs_remove_group(&client->dev.kobj, &ds1682_group); |
| return 0; |
| } |
| |
| static struct i2c_driver ds1682_driver = { |
| .driver = { |
| .name = "ds1682", |
| }, |
| .probe = ds1682_probe, |
| .remove = ds1682_remove, |
| }; |
| |
| static int __init ds1682_init(void) |
| { |
| return i2c_add_driver(&ds1682_driver); |
| } |
| |
| static void __exit ds1682_exit(void) |
| { |
| i2c_del_driver(&ds1682_driver); |
| } |
| |
| MODULE_AUTHOR("Grant Likely <grant.likely@secretlab.ca>"); |
| MODULE_DESCRIPTION("DS1682 Elapsed Time Indicator driver"); |
| MODULE_LICENSE("GPL"); |
| |
| module_init(ds1682_init); |
| module_exit(ds1682_exit); |