| /* |
| * linux/arch/alpha/kernel/err_marvel.c |
| * |
| * Copyright (C) 2001 Jeff Wiedemeier (Compaq Computer Corporation) |
| * |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/pci.h> |
| #include <linux/sched.h> |
| |
| #include <asm/io.h> |
| #include <asm/console.h> |
| #include <asm/core_marvel.h> |
| #include <asm/hwrpb.h> |
| #include <asm/smp.h> |
| #include <asm/err_common.h> |
| #include <asm/err_ev7.h> |
| |
| #include "err_impl.h" |
| #include "proto.h" |
| |
| static void |
| marvel_print_680_frame(struct ev7_lf_subpackets *lf_subpackets) |
| { |
| #ifdef CONFIG_VERBOSE_MCHECK |
| struct ev7_pal_environmental_subpacket *env; |
| struct { int type; char *name; } ev_packets[] = { |
| { EL_TYPE__PAL__ENV__AMBIENT_TEMPERATURE, |
| "Ambient Temperature" }, |
| { EL_TYPE__PAL__ENV__AIRMOVER_FAN, |
| "AirMover / Fan" }, |
| { EL_TYPE__PAL__ENV__VOLTAGE, |
| "Voltage" }, |
| { EL_TYPE__PAL__ENV__INTRUSION, |
| "Intrusion" }, |
| { EL_TYPE__PAL__ENV__POWER_SUPPLY, |
| "Power Supply" }, |
| { EL_TYPE__PAL__ENV__LAN, |
| "LAN" }, |
| { EL_TYPE__PAL__ENV__HOT_PLUG, |
| "Hot Plug" }, |
| { 0, NULL } |
| }; |
| int i; |
| |
| for (i = 0; ev_packets[i].type != 0; i++) { |
| env = lf_subpackets->env[ev7_lf_env_index(ev_packets[i].type)]; |
| if (!env) |
| continue; |
| |
| printk("%s**%s event (cabinet %d, drawer %d)\n", |
| err_print_prefix, |
| ev_packets[i].name, |
| env->cabinet, |
| env->drawer); |
| printk("%s Module Type: 0x%x - Unit ID 0x%x - " |
| "Condition 0x%x\n", |
| err_print_prefix, |
| env->module_type, |
| env->unit_id, |
| env->condition); |
| } |
| #endif /* CONFIG_VERBOSE_MCHECK */ |
| } |
| |
| static int |
| marvel_process_680_frame(struct ev7_lf_subpackets *lf_subpackets, int print) |
| { |
| int status = MCHK_DISPOSITION_UNKNOWN_ERROR; |
| int i; |
| |
| for (i = ev7_lf_env_index(EL_TYPE__PAL__ENV__AMBIENT_TEMPERATURE); |
| i <= ev7_lf_env_index(EL_TYPE__PAL__ENV__HOT_PLUG); |
| i++) { |
| if (lf_subpackets->env[i]) |
| status = MCHK_DISPOSITION_REPORT; |
| } |
| |
| if (print) |
| marvel_print_680_frame(lf_subpackets); |
| |
| return status; |
| } |
| |
| #ifdef CONFIG_VERBOSE_MCHECK |
| |
| static void |
| marvel_print_err_cyc(u64 err_cyc) |
| { |
| static char *packet_desc[] = { |
| "No Error", |
| "UNKNOWN", |
| "1 cycle (1 or 2 flit packet)", |
| "2 cycles (3 flit packet)", |
| "9 cycles (18 flit packet)", |
| "10 cycles (19 flit packet)", |
| "UNKNOWN", |
| "UNKNOWN", |
| "UNKNOWN" |
| }; |
| |
| #define IO7__ERR_CYC__ODD_FLT (1UL << 0) |
| #define IO7__ERR_CYC__EVN_FLT (1UL << 1) |
| #define IO7__ERR_CYC__PACKET__S (6) |
| #define IO7__ERR_CYC__PACKET__M (0x7) |
| #define IO7__ERR_CYC__LOC (1UL << 5) |
| #define IO7__ERR_CYC__CYCLE__S (2) |
| #define IO7__ERR_CYC__CYCLE__M (0x7) |
| |
| printk("%s Packet In Error: %s\n" |
| "%s Error in %s, cycle %ld%s%s\n", |
| err_print_prefix, |
| packet_desc[EXTRACT(err_cyc, IO7__ERR_CYC__PACKET)], |
| err_print_prefix, |
| (err_cyc & IO7__ERR_CYC__LOC) ? "DATA" : "HEADER", |
| EXTRACT(err_cyc, IO7__ERR_CYC__CYCLE), |
| (err_cyc & IO7__ERR_CYC__ODD_FLT) ? " [ODD Flit]": "", |
| (err_cyc & IO7__ERR_CYC__EVN_FLT) ? " [Even Flit]": ""); |
| } |
| |
| static void |
| marvel_print_po7_crrct_sym(u64 crrct_sym) |
| { |
| #define IO7__PO7_CRRCT_SYM__SYN__S (0) |
| #define IO7__PO7_CRRCT_SYM__SYN__M (0x7f) |
| #define IO7__PO7_CRRCT_SYM__ERR_CYC__S (7) /* ERR_CYC + ODD_FLT + EVN_FLT */ |
| #define IO7__PO7_CRRCT_SYM__ERR_CYC__M (0x1ff) |
| |
| |
| printk("%s Correctable Error Symptoms:\n" |
| "%s Syndrome: 0x%llx\n", |
| err_print_prefix, |
| err_print_prefix, EXTRACT(crrct_sym, IO7__PO7_CRRCT_SYM__SYN)); |
| marvel_print_err_cyc(EXTRACT(crrct_sym, IO7__PO7_CRRCT_SYM__ERR_CYC)); |
| } |
| |
| static void |
| marvel_print_po7_uncrr_sym(u64 uncrr_sym, u64 valid_mask) |
| { |
| static char *clk_names[] = { "_h[0]", "_h[1]", "_n[0]", "_n[1]" }; |
| static char *clk_decode[] = { |
| "No Error", |
| "One extra rising edge", |
| "Two extra rising edges", |
| "Lost one clock" |
| }; |
| static char *port_names[] = { "Port 0", "Port 1", |
| "Port 2", "Port 3", |
| "Unknown Port", "Unknown Port", |
| "Unknown Port", "Port 7" }; |
| int scratch, i; |
| |
| #define IO7__PO7_UNCRR_SYM__SYN__S (0) |
| #define IO7__PO7_UNCRR_SYM__SYN__M (0x7f) |
| #define IO7__PO7_UNCRR_SYM__ERR_CYC__S (7) /* ERR_CYC + ODD_FLT... */ |
| #define IO7__PO7_UNCRR_SYM__ERR_CYC__M (0x1ff) /* ... + EVN_FLT */ |
| #define IO7__PO7_UNCRR_SYM__CLK__S (16) |
| #define IO7__PO7_UNCRR_SYM__CLK__M (0xff) |
| #define IO7__PO7_UNCRR_SYM__CDT_OVF_TO__REQ (1UL << 24) |
| #define IO7__PO7_UNCRR_SYM__CDT_OVF_TO__RIO (1UL << 25) |
| #define IO7__PO7_UNCRR_SYM__CDT_OVF_TO__WIO (1UL << 26) |
| #define IO7__PO7_UNCRR_SYM__CDT_OVF_TO__BLK (1UL << 27) |
| #define IO7__PO7_UNCRR_SYM__CDT_OVF_TO__NBK (1UL << 28) |
| #define IO7__PO7_UNCRR_SYM__OVF__READIO (1UL << 29) |
| #define IO7__PO7_UNCRR_SYM__OVF__WRITEIO (1UL << 30) |
| #define IO7__PO7_UNCRR_SYM__OVF__FWD (1UL << 31) |
| #define IO7__PO7_UNCRR_SYM__VICTIM_SP__S (32) |
| #define IO7__PO7_UNCRR_SYM__VICTIM_SP__M (0xff) |
| #define IO7__PO7_UNCRR_SYM__DETECT_SP__S (40) |
| #define IO7__PO7_UNCRR_SYM__DETECT_SP__M (0xff) |
| #define IO7__PO7_UNCRR_SYM__STRV_VTR__S (48) |
| #define IO7__PO7_UNCRR_SYM__STRV_VTR__M (0x3ff) |
| |
| #define IO7__STRV_VTR__LSI__INTX__S (0) |
| #define IO7__STRV_VTR__LSI__INTX__M (0x3) |
| #define IO7__STRV_VTR__LSI__SLOT__S (2) |
| #define IO7__STRV_VTR__LSI__SLOT__M (0x7) |
| #define IO7__STRV_VTR__LSI__BUS__S (5) |
| #define IO7__STRV_VTR__LSI__BUS__M (0x3) |
| #define IO7__STRV_VTR__MSI__INTNUM__S (0) |
| #define IO7__STRV_VTR__MSI__INTNUM__M (0x1ff) |
| #define IO7__STRV_VTR__IS_MSI (1UL << 9) |
| |
| printk("%s Uncorrectable Error Symptoms:\n", err_print_prefix); |
| uncrr_sym &= valid_mask; |
| |
| if (EXTRACT(valid_mask, IO7__PO7_UNCRR_SYM__SYN)) |
| printk("%s Syndrome: 0x%llx\n", |
| err_print_prefix, |
| EXTRACT(uncrr_sym, IO7__PO7_UNCRR_SYM__SYN)); |
| |
| if (EXTRACT(valid_mask, IO7__PO7_UNCRR_SYM__ERR_CYC)) |
| marvel_print_err_cyc(EXTRACT(uncrr_sym, |
| IO7__PO7_UNCRR_SYM__ERR_CYC)); |
| |
| scratch = EXTRACT(uncrr_sym, IO7__PO7_UNCRR_SYM__CLK); |
| for (i = 0; i < 4; i++, scratch >>= 2) { |
| if (scratch & 0x3) |
| printk("%s Clock %s: %s\n", |
| err_print_prefix, |
| clk_names[i], clk_decode[scratch & 0x3]); |
| } |
| |
| if (uncrr_sym & IO7__PO7_UNCRR_SYM__CDT_OVF_TO__REQ) |
| printk("%s REQ Credit Timeout or Overflow\n", |
| err_print_prefix); |
| if (uncrr_sym & IO7__PO7_UNCRR_SYM__CDT_OVF_TO__RIO) |
| printk("%s RIO Credit Timeout or Overflow\n", |
| err_print_prefix); |
| if (uncrr_sym & IO7__PO7_UNCRR_SYM__CDT_OVF_TO__WIO) |
| printk("%s WIO Credit Timeout or Overflow\n", |
| err_print_prefix); |
| if (uncrr_sym & IO7__PO7_UNCRR_SYM__CDT_OVF_TO__BLK) |
| printk("%s BLK Credit Timeout or Overflow\n", |
| err_print_prefix); |
| if (uncrr_sym & IO7__PO7_UNCRR_SYM__CDT_OVF_TO__NBK) |
| printk("%s NBK Credit Timeout or Overflow\n", |
| err_print_prefix); |
| |
| if (uncrr_sym & IO7__PO7_UNCRR_SYM__OVF__READIO) |
| printk("%s Read I/O Buffer Overflow\n", |
| err_print_prefix); |
| if (uncrr_sym & IO7__PO7_UNCRR_SYM__OVF__WRITEIO) |
| printk("%s Write I/O Buffer Overflow\n", |
| err_print_prefix); |
| if (uncrr_sym & IO7__PO7_UNCRR_SYM__OVF__FWD) |
| printk("%s FWD Buffer Overflow\n", |
| err_print_prefix); |
| |
| if ((scratch = EXTRACT(uncrr_sym, IO7__PO7_UNCRR_SYM__VICTIM_SP))) { |
| int lost = scratch & (1UL << 4); |
| scratch &= ~lost; |
| for (i = 0; i < 8; i++, scratch >>= 1) { |
| if (!(scratch & 1)) |
| continue; |
| printk("%s Error Response sent to %s", |
| err_print_prefix, port_names[i]); |
| } |
| if (lost) |
| printk("%s Lost Error sent somewhere else\n", |
| err_print_prefix); |
| } |
| |
| if ((scratch = EXTRACT(uncrr_sym, IO7__PO7_UNCRR_SYM__DETECT_SP))) { |
| for (i = 0; i < 8; i++, scratch >>= 1) { |
| if (!(scratch & 1)) |
| continue; |
| printk("%s Error Reported by %s", |
| err_print_prefix, port_names[i]); |
| } |
| } |
| |
| if (EXTRACT(valid_mask, IO7__PO7_UNCRR_SYM__STRV_VTR)) { |
| char starvation_message[80]; |
| |
| scratch = EXTRACT(uncrr_sym, IO7__PO7_UNCRR_SYM__STRV_VTR); |
| if (scratch & IO7__STRV_VTR__IS_MSI) |
| sprintf(starvation_message, |
| "MSI Interrupt 0x%x", |
| EXTRACT(scratch, IO7__STRV_VTR__MSI__INTNUM)); |
| else |
| sprintf(starvation_message, |
| "LSI INT%c for Bus:Slot (%d:%d)\n", |
| 'A' + EXTRACT(scratch, |
| IO7__STRV_VTR__LSI__INTX), |
| EXTRACT(scratch, IO7__STRV_VTR__LSI__BUS), |
| EXTRACT(scratch, IO7__STRV_VTR__LSI__SLOT)); |
| |
| printk("%s Starvation Int Trigger By: %s\n", |
| err_print_prefix, starvation_message); |
| } |
| } |
| |
| static void |
| marvel_print_po7_ugbge_sym(u64 ugbge_sym) |
| { |
| char opcode_str[10]; |
| |
| #define IO7__PO7_UGBGE_SYM__UPH_PKT_OFF__S (6) |
| #define IO7__PO7_UGBGE_SYM__UPH_PKT_OFF__M (0xfffffffful) |
| #define IO7__PO7_UGBGE_SYM__UPH_OPCODE__S (40) |
| #define IO7__PO7_UGBGE_SYM__UPH_OPCODE__M (0xff) |
| #define IO7__PO7_UGBGE_SYM__UPH_SRC_PORT__S (48) |
| #define IO7__PO7_UGBGE_SYM__UPH_SRC_PORT__M (0xf) |
| #define IO7__PO7_UGBGE_SYM__UPH_DEST_PID__S (52) |
| #define IO7__PO7_UGBGE_SYM__UPH_DEST_PID__M (0x7ff) |
| #define IO7__PO7_UGBGE_SYM__VALID (1UL << 63) |
| |
| if (!(ugbge_sym & IO7__PO7_UGBGE_SYM__VALID)) |
| return; |
| |
| switch(EXTRACT(ugbge_sym, IO7__PO7_UGBGE_SYM__UPH_OPCODE)) { |
| case 0x51: |
| sprintf(opcode_str, "Wr32"); |
| break; |
| case 0x50: |
| sprintf(opcode_str, "WrQW"); |
| break; |
| case 0x54: |
| sprintf(opcode_str, "WrIPR"); |
| break; |
| case 0xD8: |
| sprintf(opcode_str, "Victim"); |
| break; |
| case 0xC5: |
| sprintf(opcode_str, "BlkIO"); |
| break; |
| default: |
| sprintf(opcode_str, "0x%llx\n", |
| EXTRACT(ugbge_sym, IO7__PO7_UGBGE_SYM__UPH_OPCODE)); |
| break; |
| } |
| |
| printk("%s Up Hose Garbage Symptom:\n" |
| "%s Source Port: %ld - Dest PID: %ld - OpCode: %s\n", |
| err_print_prefix, |
| err_print_prefix, |
| EXTRACT(ugbge_sym, IO7__PO7_UGBGE_SYM__UPH_SRC_PORT), |
| EXTRACT(ugbge_sym, IO7__PO7_UGBGE_SYM__UPH_DEST_PID), |
| opcode_str); |
| |
| if (0xC5 != EXTRACT(ugbge_sym, IO7__PO7_UGBGE_SYM__UPH_OPCODE)) |
| printk("%s Packet Offset 0x%08llx\n", |
| err_print_prefix, |
| EXTRACT(ugbge_sym, IO7__PO7_UGBGE_SYM__UPH_PKT_OFF)); |
| } |
| |
| static void |
| marvel_print_po7_err_sum(struct ev7_pal_io_subpacket *io) |
| { |
| u64 uncrr_sym_valid = 0; |
| |
| #define IO7__PO7_ERRSUM__CR_SBE (1UL << 32) |
| #define IO7__PO7_ERRSUM__CR_SBE2 (1UL << 33) |
| #define IO7__PO7_ERRSUM__CR_PIO_WBYTE (1UL << 34) |
| #define IO7__PO7_ERRSUM__CR_CSR_NXM (1UL << 35) |
| #define IO7__PO7_ERRSUM__CR_RPID_ACV (1UL << 36) |
| #define IO7__PO7_ERRSUM__CR_RSP_NXM (1UL << 37) |
| #define IO7__PO7_ERRSUM__CR_ERR_RESP (1UL << 38) |
| #define IO7__PO7_ERRSUM__CR_CLK_DERR (1UL << 39) |
| #define IO7__PO7_ERRSUM__CR_DAT_DBE (1UL << 40) |
| #define IO7__PO7_ERRSUM__CR_DAT_GRBG (1UL << 41) |
| #define IO7__PO7_ERRSUM__MAF_TO (1UL << 42) |
| #define IO7__PO7_ERRSUM__UGBGE (1UL << 43) |
| #define IO7__PO7_ERRSUM__UN_MAF_LOST (1UL << 44) |
| #define IO7__PO7_ERRSUM__UN_PKT_OVF (1UL << 45) |
| #define IO7__PO7_ERRSUM__UN_CDT_OVF (1UL << 46) |
| #define IO7__PO7_ERRSUM__UN_DEALLOC (1UL << 47) |
| #define IO7__PO7_ERRSUM__BH_CDT_TO (1UL << 51) |
| #define IO7__PO7_ERRSUM__BH_CLK_HDR (1UL << 52) |
| #define IO7__PO7_ERRSUM__BH_DBE_HDR (1UL << 53) |
| #define IO7__PO7_ERRSUM__BH_GBG_HDR (1UL << 54) |
| #define IO7__PO7_ERRSUM__BH_BAD_CMD (1UL << 55) |
| #define IO7__PO7_ERRSUM__HLT_INT (1UL << 56) |
| #define IO7__PO7_ERRSUM__HP_INT (1UL << 57) |
| #define IO7__PO7_ERRSUM__CRD_INT (1UL << 58) |
| #define IO7__PO7_ERRSUM__STV_INT (1UL << 59) |
| #define IO7__PO7_ERRSUM__HRD_INT (1UL << 60) |
| #define IO7__PO7_ERRSUM__BH_SUM (1UL << 61) |
| #define IO7__PO7_ERRSUM__ERR_LST (1UL << 62) |
| #define IO7__PO7_ERRSUM__ERR_VALID (1UL << 63) |
| |
| #define IO7__PO7_ERRSUM__ERR_MASK (IO7__PO7_ERRSUM__ERR_VALID | \ |
| IO7__PO7_ERRSUM__CR_SBE) |
| |
| /* |
| * Single bit errors aren't covered by ERR_VALID. |
| */ |
| if (io->po7_error_sum & IO7__PO7_ERRSUM__CR_SBE) { |
| printk("%s %sSingle Bit Error(s) detected/corrected\n", |
| err_print_prefix, |
| (io->po7_error_sum & IO7__PO7_ERRSUM__CR_SBE2) |
| ? "Multiple " : ""); |
| marvel_print_po7_crrct_sym(io->po7_crrct_sym); |
| } |
| |
| /* |
| * Neither are the interrupt status bits |
| */ |
| if (io->po7_error_sum & IO7__PO7_ERRSUM__HLT_INT) |
| printk("%s Halt Interrupt posted", err_print_prefix); |
| if (io->po7_error_sum & IO7__PO7_ERRSUM__HP_INT) { |
| printk("%s Hot Plug Event Interrupt posted", |
| err_print_prefix); |
| uncrr_sym_valid |= GEN_MASK(IO7__PO7_UNCRR_SYM__DETECT_SP); |
| } |
| if (io->po7_error_sum & IO7__PO7_ERRSUM__CRD_INT) |
| printk("%s Correctable Error Interrupt posted", |
| err_print_prefix); |
| if (io->po7_error_sum & IO7__PO7_ERRSUM__STV_INT) { |
| printk("%s Starvation Interrupt posted", err_print_prefix); |
| uncrr_sym_valid |= GEN_MASK(IO7__PO7_UNCRR_SYM__STRV_VTR); |
| } |
| if (io->po7_error_sum & IO7__PO7_ERRSUM__HRD_INT) { |
| printk("%s Hard Error Interrupt posted", err_print_prefix); |
| uncrr_sym_valid |= GEN_MASK(IO7__PO7_UNCRR_SYM__DETECT_SP); |
| } |
| |
| /* |
| * Everything else is valid only with ERR_VALID, so skip to the end |
| * (uncrr_sym check) unless ERR_VALID is set. |
| */ |
| if (!(io->po7_error_sum & IO7__PO7_ERRSUM__ERR_VALID)) |
| goto check_uncrr_sym; |
| |
| /* |
| * Since ERR_VALID is set, VICTIM_SP in uncrr_sym is valid. |
| * For bits [29:0] to also be valid, the following bits must |
| * not be set: |
| * CR_PIO_WBYTE CR_CSR_NXM CR_RSP_NXM |
| * CR_ERR_RESP MAF_TO |
| */ |
| uncrr_sym_valid |= GEN_MASK(IO7__PO7_UNCRR_SYM__VICTIM_SP); |
| if (!(io->po7_error_sum & (IO7__PO7_ERRSUM__CR_PIO_WBYTE | |
| IO7__PO7_ERRSUM__CR_CSR_NXM | |
| IO7__PO7_ERRSUM__CR_RSP_NXM | |
| IO7__PO7_ERRSUM__CR_ERR_RESP | |
| IO7__PO7_ERRSUM__MAF_TO))) |
| uncrr_sym_valid |= 0x3ffffffful; |
| |
| if (io->po7_error_sum & IO7__PO7_ERRSUM__CR_PIO_WBYTE) |
| printk("%s Write byte into IO7 CSR\n", err_print_prefix); |
| if (io->po7_error_sum & IO7__PO7_ERRSUM__CR_CSR_NXM) |
| printk("%s PIO to non-existent CSR\n", err_print_prefix); |
| if (io->po7_error_sum & IO7__PO7_ERRSUM__CR_RPID_ACV) |
| printk("%s Bus Requester PID (Access Violation)\n", |
| err_print_prefix); |
| if (io->po7_error_sum & IO7__PO7_ERRSUM__CR_RSP_NXM) |
| printk("%s Received NXM response from EV7\n", |
| err_print_prefix); |
| if (io->po7_error_sum & IO7__PO7_ERRSUM__CR_ERR_RESP) |
| printk("%s Received ERROR RESPONSE\n", err_print_prefix); |
| if (io->po7_error_sum & IO7__PO7_ERRSUM__CR_CLK_DERR) |
| printk("%s Clock error on data flit\n", err_print_prefix); |
| if (io->po7_error_sum & IO7__PO7_ERRSUM__CR_DAT_DBE) |
| printk("%s Double Bit Error Data Error Detected\n", |
| err_print_prefix); |
| if (io->po7_error_sum & IO7__PO7_ERRSUM__CR_DAT_GRBG) |
| printk("%s Garbage Encoding Detected on the data\n", |
| err_print_prefix); |
| if (io->po7_error_sum & IO7__PO7_ERRSUM__UGBGE) { |
| printk("%s Garbage Encoding sent up hose\n", |
| err_print_prefix); |
| marvel_print_po7_ugbge_sym(io->po7_ugbge_sym); |
| } |
| if (io->po7_error_sum & IO7__PO7_ERRSUM__UN_MAF_LOST) |
| printk("%s Orphan response (unexpected response)\n", |
| err_print_prefix); |
| if (io->po7_error_sum & IO7__PO7_ERRSUM__UN_PKT_OVF) |
| printk("%s Down hose packet overflow\n", err_print_prefix); |
| if (io->po7_error_sum & IO7__PO7_ERRSUM__UN_CDT_OVF) |
| printk("%s Down hose credit overflow\n", err_print_prefix); |
| if (io->po7_error_sum & IO7__PO7_ERRSUM__UN_DEALLOC) |
| printk("%s Unexpected or bad dealloc field\n", |
| err_print_prefix); |
| |
| /* |
| * The black hole events. |
| */ |
| if (io->po7_error_sum & IO7__PO7_ERRSUM__MAF_TO) |
| printk("%s BLACK HOLE: Timeout for all responses\n", |
| err_print_prefix); |
| if (io->po7_error_sum & IO7__PO7_ERRSUM__BH_CDT_TO) |
| printk("%s BLACK HOLE: Credit Timeout\n", err_print_prefix); |
| if (io->po7_error_sum & IO7__PO7_ERRSUM__BH_CLK_HDR) |
| printk("%s BLACK HOLE: Clock check on header\n", |
| err_print_prefix); |
| if (io->po7_error_sum & IO7__PO7_ERRSUM__BH_DBE_HDR) |
| printk("%s BLACK HOLE: Uncorrectable Error on header\n", |
| err_print_prefix); |
| if (io->po7_error_sum & IO7__PO7_ERRSUM__BH_GBG_HDR) |
| printk("%s BLACK HOLE: Garbage on header\n", |
| err_print_prefix); |
| if (io->po7_error_sum & IO7__PO7_ERRSUM__BH_BAD_CMD) |
| printk("%s BLACK HOLE: Bad EV7 command\n", |
| err_print_prefix); |
| |
| if (io->po7_error_sum & IO7__PO7_ERRSUM__ERR_LST) |
| printk("%s Lost Error\n", err_print_prefix); |
| |
| printk("%s Failing Packet:\n" |
| "%s Cycle 1: %016llx\n" |
| "%s Cycle 2: %016llx\n", |
| err_print_prefix, |
| err_print_prefix, io->po7_err_pkt0, |
| err_print_prefix, io->po7_err_pkt1); |
| /* |
| * If there are any valid bits in UNCRR sym for this err, |
| * print UNCRR_SYM as well. |
| */ |
| check_uncrr_sym: |
| if (uncrr_sym_valid) |
| marvel_print_po7_uncrr_sym(io->po7_uncrr_sym, uncrr_sym_valid); |
| } |
| |
| static void |
| marvel_print_pox_tlb_err(u64 tlb_err) |
| { |
| static char *tlb_errors[] = { |
| "No Error", |
| "North Port Signaled Error fetching TLB entry", |
| "PTE invalid or UCC or GBG error on this entry", |
| "Address did not hit any DMA window" |
| }; |
| |
| #define IO7__POX_TLBERR__ERR_VALID (1UL << 63) |
| #define IO7__POX_TLBERR__ERRCODE__S (0) |
| #define IO7__POX_TLBERR__ERRCODE__M (0x3) |
| #define IO7__POX_TLBERR__ERR_TLB_PTR__S (3) |
| #define IO7__POX_TLBERR__ERR_TLB_PTR__M (0x7) |
| #define IO7__POX_TLBERR__FADDR__S (6) |
| #define IO7__POX_TLBERR__FADDR__M (0x3fffffffffful) |
| |
| if (!(tlb_err & IO7__POX_TLBERR__ERR_VALID)) |
| return; |
| |
| printk("%s TLB Error on index 0x%llx:\n" |
| "%s - %s\n" |
| "%s - Addr: 0x%016llx\n", |
| err_print_prefix, |
| EXTRACT(tlb_err, IO7__POX_TLBERR__ERR_TLB_PTR), |
| err_print_prefix, |
| tlb_errors[EXTRACT(tlb_err, IO7__POX_TLBERR__ERRCODE)], |
| err_print_prefix, |
| EXTRACT(tlb_err, IO7__POX_TLBERR__FADDR) << 6); |
| } |
| |
| static void |
| marvel_print_pox_spl_cmplt(u64 spl_cmplt) |
| { |
| char message[80]; |
| |
| #define IO7__POX_SPLCMPLT__MESSAGE__S (0) |
| #define IO7__POX_SPLCMPLT__MESSAGE__M (0x0fffffffful) |
| #define IO7__POX_SPLCMPLT__SOURCE_BUS__S (40) |
| #define IO7__POX_SPLCMPLT__SOURCE_BUS__M (0xfful) |
| #define IO7__POX_SPLCMPLT__SOURCE_DEV__S (35) |
| #define IO7__POX_SPLCMPLT__SOURCE_DEV__M (0x1ful) |
| #define IO7__POX_SPLCMPLT__SOURCE_FUNC__S (32) |
| #define IO7__POX_SPLCMPLT__SOURCE_FUNC__M (0x07ul) |
| |
| #define IO7__POX_SPLCMPLT__MSG_CLASS__S (28) |
| #define IO7__POX_SPLCMPLT__MSG_CLASS__M (0xf) |
| #define IO7__POX_SPLCMPLT__MSG_INDEX__S (20) |
| #define IO7__POX_SPLCMPLT__MSG_INDEX__M (0xff) |
| #define IO7__POX_SPLCMPLT__MSG_CLASSINDEX__S (20) |
| #define IO7__POX_SPLCMPLT__MSG_CLASSINDEX__M (0xfff) |
| #define IO7__POX_SPLCMPLT__REM_LOWER_ADDR__S (12) |
| #define IO7__POX_SPLCMPLT__REM_LOWER_ADDR__M (0x7f) |
| #define IO7__POX_SPLCMPLT__REM_BYTE_COUNT__S (0) |
| #define IO7__POX_SPLCMPLT__REM_BYTE_COUNT__M (0xfff) |
| |
| printk("%s Split Completion Error:\n" |
| "%s Source (Bus:Dev:Func): %ld:%ld:%ld\n", |
| err_print_prefix, |
| err_print_prefix, |
| EXTRACT(spl_cmplt, IO7__POX_SPLCMPLT__SOURCE_BUS), |
| EXTRACT(spl_cmplt, IO7__POX_SPLCMPLT__SOURCE_DEV), |
| EXTRACT(spl_cmplt, IO7__POX_SPLCMPLT__SOURCE_FUNC)); |
| |
| switch(EXTRACT(spl_cmplt, IO7__POX_SPLCMPLT__MSG_CLASSINDEX)) { |
| case 0x000: |
| sprintf(message, "Normal completion"); |
| break; |
| case 0x100: |
| sprintf(message, "Bridge - Master Abort"); |
| break; |
| case 0x101: |
| sprintf(message, "Bridge - Target Abort"); |
| break; |
| case 0x102: |
| sprintf(message, "Bridge - Uncorrectable Write Data Error"); |
| break; |
| case 0x200: |
| sprintf(message, "Byte Count Out of Range"); |
| break; |
| case 0x201: |
| sprintf(message, "Uncorrectable Split Write Data Error"); |
| break; |
| default: |
| sprintf(message, "%08llx\n", |
| EXTRACT(spl_cmplt, IO7__POX_SPLCMPLT__MESSAGE)); |
| break; |
| } |
| printk("%s Message: %s\n", err_print_prefix, message); |
| } |
| |
| static void |
| marvel_print_pox_trans_sum(u64 trans_sum) |
| { |
| char *pcix_cmd[] = { "Interrupt Acknowledge", |
| "Special Cycle", |
| "I/O Read", |
| "I/O Write", |
| "Reserved", |
| "Reserved / Device ID Message", |
| "Memory Read", |
| "Memory Write", |
| "Reserved / Alias to Memory Read Block", |
| "Reserved / Alias to Memory Write Block", |
| "Configuration Read", |
| "Configuration Write", |
| "Memory Read Multiple / Split Completion", |
| "Dual Address Cycle", |
| "Memory Read Line / Memory Read Block", |
| "Memory Write and Invalidate / Memory Write Block" |
| }; |
| |
| #define IO7__POX_TRANSUM__PCI_ADDR__S (0) |
| #define IO7__POX_TRANSUM__PCI_ADDR__M (0x3fffffffffffful) |
| #define IO7__POX_TRANSUM__DAC (1UL << 50) |
| #define IO7__POX_TRANSUM__PCIX_MASTER_SLOT__S (52) |
| #define IO7__POX_TRANSUM__PCIX_MASTER_SLOT__M (0xf) |
| #define IO7__POX_TRANSUM__PCIX_CMD__S (56) |
| #define IO7__POX_TRANSUM__PCIX_CMD__M (0xf) |
| #define IO7__POX_TRANSUM__ERR_VALID (1UL << 63) |
| |
| if (!(trans_sum & IO7__POX_TRANSUM__ERR_VALID)) |
| return; |
| |
| printk("%s Transaction Summary:\n" |
| "%s Command: 0x%llx - %s\n" |
| "%s Address: 0x%016llx%s\n" |
| "%s PCI-X Master Slot: 0x%llx\n", |
| err_print_prefix, |
| err_print_prefix, |
| EXTRACT(trans_sum, IO7__POX_TRANSUM__PCIX_CMD), |
| pcix_cmd[EXTRACT(trans_sum, IO7__POX_TRANSUM__PCIX_CMD)], |
| err_print_prefix, |
| EXTRACT(trans_sum, IO7__POX_TRANSUM__PCI_ADDR), |
| (trans_sum & IO7__POX_TRANSUM__DAC) ? " (DAC)" : "", |
| err_print_prefix, |
| EXTRACT(trans_sum, IO7__POX_TRANSUM__PCIX_MASTER_SLOT)); |
| } |
| |
| static void |
| marvel_print_pox_err(u64 err_sum, struct ev7_pal_io_one_port *port) |
| { |
| #define IO7__POX_ERRSUM__AGP_REQQ_OVFL (1UL << 4) |
| #define IO7__POX_ERRSUM__AGP_SYNC_ERR (1UL << 5) |
| #define IO7__POX_ERRSUM__MRETRY_TO (1UL << 6) |
| #define IO7__POX_ERRSUM__PCIX_UX_SPL (1UL << 7) |
| #define IO7__POX_ERRSUM__PCIX_SPLIT_TO (1UL << 8) |
| #define IO7__POX_ERRSUM__PCIX_DISCARD_SPL (1UL << 9) |
| #define IO7__POX_ERRSUM__DMA_RD_TO (1UL << 10) |
| #define IO7__POX_ERRSUM__CSR_NXM_RD (1UL << 11) |
| #define IO7__POX_ERRSUM__CSR_NXM_WR (1UL << 12) |
| #define IO7__POX_ERRSUM__DMA_TO (1UL << 13) |
| #define IO7__POX_ERRSUM__ALL_MABORTS (1UL << 14) |
| #define IO7__POX_ERRSUM__MABORT (1UL << 15) |
| #define IO7__POX_ERRSUM__MABORT_MASK (IO7__POX_ERRSUM__ALL_MABORTS|\ |
| IO7__POX_ERRSUM__MABORT) |
| #define IO7__POX_ERRSUM__PT_TABORT (1UL << 16) |
| #define IO7__POX_ERRSUM__PM_TABORT (1UL << 17) |
| #define IO7__POX_ERRSUM__TABORT_MASK (IO7__POX_ERRSUM__PT_TABORT | \ |
| IO7__POX_ERRSUM__PM_TABORT) |
| #define IO7__POX_ERRSUM__SERR (1UL << 18) |
| #define IO7__POX_ERRSUM__ADDRERR_STB (1UL << 19) |
| #define IO7__POX_ERRSUM__DETECTED_SERR (1UL << 20) |
| #define IO7__POX_ERRSUM__PERR (1UL << 21) |
| #define IO7__POX_ERRSUM__DATAERR_STB_NIOW (1UL << 22) |
| #define IO7__POX_ERRSUM__DETECTED_PERR (1UL << 23) |
| #define IO7__POX_ERRSUM__PM_PERR (1UL << 24) |
| #define IO7__POX_ERRSUM__PT_SCERROR (1UL << 26) |
| #define IO7__POX_ERRSUM__HUNG_BUS (1UL << 28) |
| #define IO7__POX_ERRSUM__UPE_ERROR__S (51) |
| #define IO7__POX_ERRSUM__UPE_ERROR__M (0xffUL) |
| #define IO7__POX_ERRSUM__UPE_ERROR GEN_MASK(IO7__POX_ERRSUM__UPE_ERROR) |
| #define IO7__POX_ERRSUM__TLB_ERR (1UL << 59) |
| #define IO7__POX_ERRSUM__ERR_VALID (1UL << 63) |
| |
| #define IO7__POX_ERRSUM__TRANS_SUM__MASK (IO7__POX_ERRSUM__MRETRY_TO | \ |
| IO7__POX_ERRSUM__PCIX_UX_SPL | \ |
| IO7__POX_ERRSUM__PCIX_SPLIT_TO | \ |
| IO7__POX_ERRSUM__DMA_TO | \ |
| IO7__POX_ERRSUM__MABORT_MASK | \ |
| IO7__POX_ERRSUM__TABORT_MASK | \ |
| IO7__POX_ERRSUM__SERR | \ |
| IO7__POX_ERRSUM__ADDRERR_STB | \ |
| IO7__POX_ERRSUM__PERR | \ |
| IO7__POX_ERRSUM__DATAERR_STB_NIOW |\ |
| IO7__POX_ERRSUM__DETECTED_PERR | \ |
| IO7__POX_ERRSUM__PM_PERR | \ |
| IO7__POX_ERRSUM__PT_SCERROR | \ |
| IO7__POX_ERRSUM__UPE_ERROR) |
| |
| if (!(err_sum & IO7__POX_ERRSUM__ERR_VALID)) |
| return; |
| |
| /* |
| * First the transaction summary errors |
| */ |
| if (err_sum & IO7__POX_ERRSUM__MRETRY_TO) |
| printk("%s IO7 Master Retry Timeout expired\n", |
| err_print_prefix); |
| if (err_sum & IO7__POX_ERRSUM__PCIX_UX_SPL) |
| printk("%s Unexpected Split Completion\n", |
| err_print_prefix); |
| if (err_sum & IO7__POX_ERRSUM__PCIX_SPLIT_TO) |
| printk("%s IO7 Split Completion Timeout expired\n", |
| err_print_prefix); |
| if (err_sum & IO7__POX_ERRSUM__DMA_TO) |
| printk("%s Hung bus during DMA transaction\n", |
| err_print_prefix); |
| if (err_sum & IO7__POX_ERRSUM__MABORT_MASK) |
| printk("%s Master Abort\n", err_print_prefix); |
| if (err_sum & IO7__POX_ERRSUM__PT_TABORT) |
| printk("%s IO7 Asserted Target Abort\n", err_print_prefix); |
| if (err_sum & IO7__POX_ERRSUM__PM_TABORT) |
| printk("%s IO7 Received Target Abort\n", err_print_prefix); |
| if (err_sum & IO7__POX_ERRSUM__ADDRERR_STB) { |
| printk("%s Address or PCI-X Attribute Parity Error\n", |
| err_print_prefix); |
| if (err_sum & IO7__POX_ERRSUM__SERR) |
| printk("%s IO7 Asserted SERR\n", err_print_prefix); |
| } |
| if (err_sum & IO7__POX_ERRSUM__PERR) { |
| if (err_sum & IO7__POX_ERRSUM__DATAERR_STB_NIOW) |
| printk("%s IO7 Detected Data Parity Error\n", |
| err_print_prefix); |
| else |
| printk("%s Split Completion Response with " |
| "Parity Error\n", err_print_prefix); |
| } |
| if (err_sum & IO7__POX_ERRSUM__DETECTED_PERR) |
| printk("%s PERR detected\n", err_print_prefix); |
| if (err_sum & IO7__POX_ERRSUM__PM_PERR) |
| printk("%s PERR while IO7 is master\n", err_print_prefix); |
| if (err_sum & IO7__POX_ERRSUM__PT_SCERROR) { |
| printk("%s IO7 Received Split Completion Error message\n", |
| err_print_prefix); |
| marvel_print_pox_spl_cmplt(port->pox_spl_cmplt); |
| } |
| if (err_sum & IO7__POX_ERRSUM__UPE_ERROR) { |
| unsigned int upe_error = EXTRACT(err_sum, |
| IO7__POX_ERRSUM__UPE_ERROR); |
| int i; |
| static char *upe_errors[] = { |
| "Parity Error on MSI write data", |
| "MSI read (MSI window is write only", |
| "TLB - Invalid WR transaction", |
| "TLB - Invalid RD transaction", |
| "DMA - WR error (see north port)", |
| "DMA - RD error (see north port)", |
| "PPR - WR error (see north port)", |
| "PPR - RD error (see north port)" |
| }; |
| |
| printk("%s UPE Error:\n", err_print_prefix); |
| for (i = 0; i < 8; i++) { |
| if (upe_error & (1 << i)) |
| printk("%s %s\n", err_print_prefix, |
| upe_errors[i]); |
| } |
| } |
| |
| /* |
| * POx_TRANS_SUM, if appropriate. |
| */ |
| if (err_sum & IO7__POX_ERRSUM__TRANS_SUM__MASK) |
| marvel_print_pox_trans_sum(port->pox_trans_sum); |
| |
| /* |
| * Then TLB_ERR. |
| */ |
| if (err_sum & IO7__POX_ERRSUM__TLB_ERR) { |
| printk("%s TLB ERROR\n", err_print_prefix); |
| marvel_print_pox_tlb_err(port->pox_tlb_err); |
| } |
| |
| /* |
| * And the single bit status errors. |
| */ |
| if (err_sum & IO7__POX_ERRSUM__AGP_REQQ_OVFL) |
| printk("%s AGP Request Queue Overflow\n", err_print_prefix); |
| if (err_sum & IO7__POX_ERRSUM__AGP_SYNC_ERR) |
| printk("%s AGP Sync Error\n", err_print_prefix); |
| if (err_sum & IO7__POX_ERRSUM__PCIX_DISCARD_SPL) |
| printk("%s Discarded split completion\n", err_print_prefix); |
| if (err_sum & IO7__POX_ERRSUM__DMA_RD_TO) |
| printk("%s DMA Read Timeout\n", err_print_prefix); |
| if (err_sum & IO7__POX_ERRSUM__CSR_NXM_RD) |
| printk("%s CSR NXM READ\n", err_print_prefix); |
| if (err_sum & IO7__POX_ERRSUM__CSR_NXM_WR) |
| printk("%s CSR NXM WRITE\n", err_print_prefix); |
| if (err_sum & IO7__POX_ERRSUM__DETECTED_SERR) |
| printk("%s SERR detected\n", err_print_prefix); |
| if (err_sum & IO7__POX_ERRSUM__HUNG_BUS) |
| printk("%s HUNG BUS detected\n", err_print_prefix); |
| } |
| |
| #endif /* CONFIG_VERBOSE_MCHECK */ |
| |
| static struct ev7_pal_io_subpacket * |
| marvel_find_io7_with_error(struct ev7_lf_subpackets *lf_subpackets) |
| { |
| struct ev7_pal_io_subpacket *io = lf_subpackets->io; |
| struct io7 *io7; |
| int i; |
| |
| /* |
| * Caller must provide the packet to fill |
| */ |
| if (!io) |
| return NULL; |
| |
| /* |
| * Fill the subpacket with the console's standard fill pattern |
| */ |
| memset(io, 0x55, sizeof(*io)); |
| |
| for (io7 = NULL; NULL != (io7 = marvel_next_io7(io7)); ) { |
| unsigned long err_sum = 0; |
| |
| err_sum |= io7->csrs->PO7_ERROR_SUM.csr; |
| for (i = 0; i < IO7_NUM_PORTS; i++) { |
| if (!io7->ports[i].enabled) |
| continue; |
| err_sum |= io7->ports[i].csrs->POx_ERR_SUM.csr; |
| } |
| |
| /* |
| * Is there at least one error? |
| */ |
| if (err_sum & (1UL << 63)) |
| break; |
| } |
| |
| /* |
| * Did we find an IO7 with an error? |
| */ |
| if (!io7) |
| return NULL; |
| |
| /* |
| * We have an IO7 with an error. |
| * |
| * Fill in the IO subpacket. |
| */ |
| io->io_asic_rev = io7->csrs->IO_ASIC_REV.csr; |
| io->io_sys_rev = io7->csrs->IO_SYS_REV.csr; |
| io->io7_uph = io7->csrs->IO7_UPH.csr; |
| io->hpi_ctl = io7->csrs->HPI_CTL.csr; |
| io->crd_ctl = io7->csrs->CRD_CTL.csr; |
| io->hei_ctl = io7->csrs->HEI_CTL.csr; |
| io->po7_error_sum = io7->csrs->PO7_ERROR_SUM.csr; |
| io->po7_uncrr_sym = io7->csrs->PO7_UNCRR_SYM.csr; |
| io->po7_crrct_sym = io7->csrs->PO7_CRRCT_SYM.csr; |
| io->po7_ugbge_sym = io7->csrs->PO7_UGBGE_SYM.csr; |
| io->po7_err_pkt0 = io7->csrs->PO7_ERR_PKT[0].csr; |
| io->po7_err_pkt1 = io7->csrs->PO7_ERR_PKT[1].csr; |
| |
| for (i = 0; i < IO7_NUM_PORTS; i++) { |
| io7_ioport_csrs *csrs = io7->ports[i].csrs; |
| |
| if (!io7->ports[i].enabled) |
| continue; |
| |
| io->ports[i].pox_err_sum = csrs->POx_ERR_SUM.csr; |
| io->ports[i].pox_tlb_err = csrs->POx_TLB_ERR.csr; |
| io->ports[i].pox_spl_cmplt = csrs->POx_SPL_COMPLT.csr; |
| io->ports[i].pox_trans_sum = csrs->POx_TRANS_SUM.csr; |
| io->ports[i].pox_first_err = csrs->POx_FIRST_ERR.csr; |
| io->ports[i].pox_mult_err = csrs->POx_MULT_ERR.csr; |
| io->ports[i].pox_dm_source = csrs->POx_DM_SOURCE.csr; |
| io->ports[i].pox_dm_dest = csrs->POx_DM_DEST.csr; |
| io->ports[i].pox_dm_size = csrs->POx_DM_SIZE.csr; |
| io->ports[i].pox_dm_ctrl = csrs->POx_DM_CTRL.csr; |
| |
| /* |
| * Ack this port's errors, if any. POx_ERR_SUM must be last. |
| * |
| * Most of the error registers get cleared and unlocked when |
| * the associated bits in POx_ERR_SUM are cleared (by writing |
| * 1). POx_TLB_ERR is an exception and must be explicitly |
| * cleared. |
| */ |
| csrs->POx_TLB_ERR.csr = io->ports[i].pox_tlb_err; |
| csrs->POx_ERR_SUM.csr = io->ports[i].pox_err_sum; |
| mb(); |
| csrs->POx_ERR_SUM.csr; |
| } |
| |
| /* |
| * Ack any port 7 error(s). |
| */ |
| io7->csrs->PO7_ERROR_SUM.csr = io->po7_error_sum; |
| mb(); |
| io7->csrs->PO7_ERROR_SUM.csr; |
| |
| /* |
| * Correct the io7_pid. |
| */ |
| lf_subpackets->io_pid = io7->pe; |
| |
| return io; |
| } |
| |
| static int |
| marvel_process_io_error(struct ev7_lf_subpackets *lf_subpackets, int print) |
| { |
| int status = MCHK_DISPOSITION_UNKNOWN_ERROR; |
| |
| #ifdef CONFIG_VERBOSE_MCHECK |
| struct ev7_pal_io_subpacket *io = lf_subpackets->io; |
| int i; |
| #endif /* CONFIG_VERBOSE_MCHECK */ |
| |
| #define MARVEL_IO_ERR_VALID(x) ((x) & (1UL << 63)) |
| |
| if (!lf_subpackets->logout || !lf_subpackets->io) |
| return status; |
| |
| /* |
| * The PALcode only builds an IO subpacket if there is a |
| * locally connected IO7. In the cases of |
| * 1) a uniprocessor kernel |
| * 2) an mp kernel before the local secondary has called in |
| * error interrupts are all directed to the primary processor. |
| * In that case, we may not have an IO subpacket at all and, event |
| * if we do, it may not be the right now. |
| * |
| * If the RBOX indicates an I/O error interrupt, make sure we have |
| * the correct IO7 information. If we don't have an IO subpacket |
| * or it's the wrong one, try to find the right one. |
| * |
| * RBOX I/O error interrupts are indicated by RBOX_INT<29> and |
| * RBOX_INT<10>. |
| */ |
| if ((lf_subpackets->io->po7_error_sum & (1UL << 32)) || |
| ((lf_subpackets->io->po7_error_sum | |
| lf_subpackets->io->ports[0].pox_err_sum | |
| lf_subpackets->io->ports[1].pox_err_sum | |
| lf_subpackets->io->ports[2].pox_err_sum | |
| lf_subpackets->io->ports[3].pox_err_sum) & (1UL << 63))) { |
| /* |
| * Either we have no IO subpacket or no error is |
| * indicated in the one we do have. Try find the |
| * one with the error. |
| */ |
| if (!marvel_find_io7_with_error(lf_subpackets)) |
| return status; |
| } |
| |
| /* |
| * We have an IO7 indicating an error - we're going to report it |
| */ |
| status = MCHK_DISPOSITION_REPORT; |
| |
| #ifdef CONFIG_VERBOSE_MCHECK |
| |
| if (!print) |
| return status; |
| |
| printk("%s*Error occurred on IO7 at PID %u\n", |
| err_print_prefix, lf_subpackets->io_pid); |
| |
| /* |
| * Check port 7 first |
| */ |
| if (lf_subpackets->io->po7_error_sum & IO7__PO7_ERRSUM__ERR_MASK) { |
| marvel_print_po7_err_sum(io); |
| |
| #if 0 |
| printk("%s PORT 7 ERROR:\n" |
| "%s PO7_ERROR_SUM: %016llx\n" |
| "%s PO7_UNCRR_SYM: %016llx\n" |
| "%s PO7_CRRCT_SYM: %016llx\n" |
| "%s PO7_UGBGE_SYM: %016llx\n" |
| "%s PO7_ERR_PKT0: %016llx\n" |
| "%s PO7_ERR_PKT1: %016llx\n", |
| err_print_prefix, |
| err_print_prefix, io->po7_error_sum, |
| err_print_prefix, io->po7_uncrr_sym, |
| err_print_prefix, io->po7_crrct_sym, |
| err_print_prefix, io->po7_ugbge_sym, |
| err_print_prefix, io->po7_err_pkt0, |
| err_print_prefix, io->po7_err_pkt1); |
| #endif |
| } |
| |
| /* |
| * Then loop through the ports |
| */ |
| for (i = 0; i < IO7_NUM_PORTS; i++) { |
| if (!MARVEL_IO_ERR_VALID(io->ports[i].pox_err_sum)) |
| continue; |
| |
| printk("%s PID %u PORT %d POx_ERR_SUM: %016llx\n", |
| err_print_prefix, |
| lf_subpackets->io_pid, i, io->ports[i].pox_err_sum); |
| marvel_print_pox_err(io->ports[i].pox_err_sum, &io->ports[i]); |
| |
| printk("%s [ POx_FIRST_ERR: %016llx ]\n", |
| err_print_prefix, io->ports[i].pox_first_err); |
| marvel_print_pox_err(io->ports[i].pox_first_err, |
| &io->ports[i]); |
| |
| } |
| |
| |
| #endif /* CONFIG_VERBOSE_MCHECK */ |
| |
| return status; |
| } |
| |
| static int |
| marvel_process_logout_frame(struct ev7_lf_subpackets *lf_subpackets, int print) |
| { |
| int status = MCHK_DISPOSITION_UNKNOWN_ERROR; |
| |
| /* |
| * I/O error? |
| */ |
| #define EV7__RBOX_INT__IO_ERROR__MASK 0x20000400ul |
| if (lf_subpackets->logout && |
| (lf_subpackets->logout->rbox_int & 0x20000400ul)) |
| status = marvel_process_io_error(lf_subpackets, print); |
| |
| /* |
| * Probing behind PCI-X bridges can cause machine checks on |
| * Marvel when the probe is handled by the bridge as a split |
| * completion transaction. The symptom is an ERROR_RESPONSE |
| * to a CONFIG address. Since these errors will happen in |
| * normal operation, dismiss them. |
| * |
| * Dismiss if: |
| * C_STAT = 0x14 (Error Reponse) |
| * C_STS<3> = 0 (C_ADDR valid) |
| * C_ADDR<42> = 1 (I/O) |
| * C_ADDR<31:22> = 111110xxb (PCI Config space) |
| */ |
| if (lf_subpackets->ev7 && |
| (lf_subpackets->ev7->c_stat == 0x14) && |
| !(lf_subpackets->ev7->c_sts & 0x8) && |
| ((lf_subpackets->ev7->c_addr & 0x400ff000000ul) |
| == 0x400fe000000ul)) |
| status = MCHK_DISPOSITION_DISMISS; |
| |
| return status; |
| } |
| |
| void |
| marvel_machine_check(unsigned long vector, unsigned long la_ptr) |
| { |
| struct el_subpacket *el_ptr = (struct el_subpacket *)la_ptr; |
| int (*process_frame)(struct ev7_lf_subpackets *, int) = NULL; |
| struct ev7_lf_subpackets subpacket_collection = { NULL, }; |
| struct ev7_pal_io_subpacket scratch_io_packet = { 0, }; |
| struct ev7_lf_subpackets *lf_subpackets = NULL; |
| int disposition = MCHK_DISPOSITION_UNKNOWN_ERROR; |
| char *saved_err_prefix = err_print_prefix; |
| char *error_type = NULL; |
| |
| /* |
| * Sync the processor |
| */ |
| mb(); |
| draina(); |
| |
| switch(vector) { |
| case SCB_Q_SYSEVENT: |
| process_frame = marvel_process_680_frame; |
| error_type = "System Event"; |
| break; |
| |
| case SCB_Q_SYSMCHK: |
| process_frame = marvel_process_logout_frame; |
| error_type = "System Uncorrectable Error"; |
| break; |
| |
| case SCB_Q_SYSERR: |
| process_frame = marvel_process_logout_frame; |
| error_type = "System Correctable Error"; |
| break; |
| |
| default: |
| /* Don't know it - pass it up. */ |
| ev7_machine_check(vector, la_ptr); |
| return; |
| } |
| |
| /* |
| * A system event or error has occurred, handle it here. |
| * |
| * Any errors in the logout frame have already been cleared by the |
| * PALcode, so just parse it. |
| */ |
| err_print_prefix = KERN_CRIT; |
| |
| /* |
| * Parse the logout frame without printing first. If the only error(s) |
| * found are classified as "dismissable", then just dismiss them and |
| * don't print any message |
| */ |
| lf_subpackets = |
| ev7_collect_logout_frame_subpackets(el_ptr, |
| &subpacket_collection); |
| if (process_frame && lf_subpackets && lf_subpackets->logout) { |
| /* |
| * We might not have the correct (or any) I/O subpacket. |
| * [ See marvel_process_io_error() for explanation. ] |
| * If we don't have one, point the io subpacket in |
| * lf_subpackets at scratch_io_packet so that |
| * marvel_find_io7_with_error() will have someplace to |
| * store the info. |
| */ |
| if (!lf_subpackets->io) |
| lf_subpackets->io = &scratch_io_packet; |
| |
| /* |
| * Default io_pid to the processor reporting the error |
| * [this will get changed in marvel_find_io7_with_error() |
| * if a different one is needed] |
| */ |
| lf_subpackets->io_pid = lf_subpackets->logout->whami; |
| |
| /* |
| * Evaluate the frames. |
| */ |
| disposition = process_frame(lf_subpackets, 0); |
| } |
| switch(disposition) { |
| case MCHK_DISPOSITION_DISMISS: |
| /* Nothing to do. */ |
| break; |
| |
| case MCHK_DISPOSITION_REPORT: |
| /* Recognized error, report it. */ |
| printk("%s*%s (Vector 0x%x) reported on CPU %d\n", |
| err_print_prefix, error_type, |
| (unsigned int)vector, (int)smp_processor_id()); |
| el_print_timestamp(&lf_subpackets->logout->timestamp); |
| process_frame(lf_subpackets, 1); |
| break; |
| |
| default: |
| /* Unknown - dump the annotated subpackets. */ |
| printk("%s*%s (Vector 0x%x) reported on CPU %d\n", |
| err_print_prefix, error_type, |
| (unsigned int)vector, (int)smp_processor_id()); |
| el_process_subpacket(el_ptr); |
| break; |
| |
| } |
| |
| err_print_prefix = saved_err_prefix; |
| |
| /* Release the logout frame. */ |
| wrmces(0x7); |
| mb(); |
| } |
| |
| void __init |
| marvel_register_error_handlers(void) |
| { |
| ev7_register_error_handlers(); |
| } |