blob: b8deffa9e1bf3ec06d9411afb7849695df27d6d2 [file] [log] [blame]
/*
* ld script to make ARM Linux kernel
* taken from the i386 version by Russell King
* Written by Martin Mares <mj@atrey.karlin.mff.cuni.cz>
*/
#include <asm-generic/vmlinux.lds.h>
#include <asm/cache.h>
#include <asm/kernel-pgtable.h>
#include <asm/thread_info.h>
#include <asm/memory.h>
#include <asm/page.h>
#include <asm/pgtable.h>
#include "image.h"
/* .exit.text needed in case of alternative patching */
#define ARM_EXIT_KEEP(x) x
#define ARM_EXIT_DISCARD(x)
OUTPUT_ARCH(aarch64)
ENTRY(_text)
jiffies = jiffies_64;
#define HYPERVISOR_TEXT \
/* \
* Align to 4 KB so that \
* a) the HYP vector table is at its minimum \
* alignment of 2048 bytes \
* b) the HYP init code will not cross a page \
* boundary if its size does not exceed \
* 4 KB (see related ASSERT() below) \
*/ \
. = ALIGN(SZ_4K); \
VMLINUX_SYMBOL(__hyp_idmap_text_start) = .; \
*(.hyp.idmap.text) \
VMLINUX_SYMBOL(__hyp_idmap_text_end) = .; \
VMLINUX_SYMBOL(__hyp_text_start) = .; \
*(.hyp.text) \
VMLINUX_SYMBOL(__hyp_text_end) = .;
#define IDMAP_TEXT \
. = ALIGN(SZ_4K); \
VMLINUX_SYMBOL(__idmap_text_start) = .; \
*(.idmap.text) \
VMLINUX_SYMBOL(__idmap_text_end) = .;
#ifdef CONFIG_HIBERNATION
#define HIBERNATE_TEXT \
. = ALIGN(SZ_4K); \
VMLINUX_SYMBOL(__hibernate_exit_text_start) = .;\
*(.hibernate_exit.text) \
VMLINUX_SYMBOL(__hibernate_exit_text_end) = .;
#else
#define HIBERNATE_TEXT
#endif
/*
* The size of the PE/COFF section that covers the kernel image, which
* runs from stext to _edata, must be a round multiple of the PE/COFF
* FileAlignment, which we set to its minimum value of 0x200. 'stext'
* itself is 4 KB aligned, so padding out _edata to a 0x200 aligned
* boundary should be sufficient.
*/
PECOFF_FILE_ALIGNMENT = 0x200;
#ifdef CONFIG_EFI
#define PECOFF_EDATA_PADDING \
.pecoff_edata_padding : { BYTE(0); . = ALIGN(PECOFF_FILE_ALIGNMENT); }
#else
#define PECOFF_EDATA_PADDING
#endif
#if defined(CONFIG_DEBUG_ALIGN_RODATA)
/*
* 4 KB granule: 1 level 2 entry
* 16 KB granule: 128 level 3 entries, with contiguous bit
* 64 KB granule: 32 level 3 entries, with contiguous bit
*/
#define SEGMENT_ALIGN SZ_2M
#else
/*
* 4 KB granule: 16 level 3 entries, with contiguous bit
* 16 KB granule: 4 level 3 entries, without contiguous bit
* 64 KB granule: 1 level 3 entry
*/
#define SEGMENT_ALIGN SZ_64K
#endif
SECTIONS
{
/*
* XXX: The linker does not define how output sections are
* assigned to input sections when there are multiple statements
* matching the same input section name. There is no documented
* order of matching.
*/
/DISCARD/ : {
ARM_EXIT_DISCARD(EXIT_TEXT)
ARM_EXIT_DISCARD(EXIT_DATA)
EXIT_CALL
*(.discard)
*(.discard.*)
*(.interp .dynamic)
*(.dynsym .dynstr .hash)
}
. = KIMAGE_VADDR + TEXT_OFFSET;
.head.text : {
_text = .;
HEAD_TEXT
}
.text : { /* Real text segment */
_stext = .; /* Text and read-only data */
__exception_text_start = .;
*(.exception.text)
__exception_text_end = .;
IRQENTRY_TEXT
SOFTIRQENTRY_TEXT
ENTRY_TEXT
TEXT_TEXT
SCHED_TEXT
CPUIDLE_TEXT
LOCK_TEXT
KPROBES_TEXT
HYPERVISOR_TEXT
IDMAP_TEXT
HIBERNATE_TEXT
*(.fixup)
*(.gnu.warning)
. = ALIGN(16);
*(.got) /* Global offset table */
}
. = ALIGN(SEGMENT_ALIGN);
_etext = .; /* End of text section */
RO_DATA(PAGE_SIZE) /* everything from this point to */
EXCEPTION_TABLE(8) /* __init_begin will be marked RO NX */
NOTES
. = ALIGN(SEGMENT_ALIGN);
__init_begin = .;
INIT_TEXT_SECTION(8)
.exit.text : {
ARM_EXIT_KEEP(EXIT_TEXT)
}
.init.data : {
INIT_DATA
INIT_SETUP(16)
INIT_CALLS
CON_INITCALL
SECURITY_INITCALL
INIT_RAM_FS
*(.init.rodata.* .init.bss) /* from the EFI stub */
}
.exit.data : {
ARM_EXIT_KEEP(EXIT_DATA)
}
PERCPU_SECTION(L1_CACHE_BYTES)
. = ALIGN(4);
.altinstructions : {
__alt_instructions = .;
*(.altinstructions)
__alt_instructions_end = .;
}
.altinstr_replacement : {
*(.altinstr_replacement)
}
.rela : ALIGN(8) {
*(.rela .rela*)
}
__rela_offset = ABSOLUTE(ADDR(.rela) - KIMAGE_VADDR);
__rela_size = SIZEOF(.rela);
. = ALIGN(SEGMENT_ALIGN);
__init_end = .;
_data = .;
_sdata = .;
RW_DATA_SECTION(L1_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE)
/*
* Data written with the MMU off but read with the MMU on requires
* cache lines to be invalidated, discarding up to a Cache Writeback
* Granule (CWG) of data from the cache. Keep the section that
* requires this type of maintenance to be in its own Cache Writeback
* Granule (CWG) area so the cache maintenance operations don't
* interfere with adjacent data.
*/
.mmuoff.data.write : ALIGN(SZ_2K) {
__mmuoff_data_start = .;
*(.mmuoff.data.write)
}
. = ALIGN(SZ_2K);
.mmuoff.data.read : {
*(.mmuoff.data.read)
__mmuoff_data_end = .;
}
PECOFF_EDATA_PADDING
_edata = .;
BSS_SECTION(0, 0, 0)
. = ALIGN(PAGE_SIZE);
idmap_pg_dir = .;
. += IDMAP_DIR_SIZE;
swapper_pg_dir = .;
. += SWAPPER_DIR_SIZE;
#ifdef CONFIG_ARM64_SW_TTBR0_PAN
reserved_ttbr0 = .;
. += RESERVED_TTBR0_SIZE;
#endif
_end = .;
STABS_DEBUG
HEAD_SYMBOLS
}
/*
* The HYP init code and ID map text can't be longer than a page each,
* and should not cross a page boundary.
*/
ASSERT(__hyp_idmap_text_end - (__hyp_idmap_text_start & ~(SZ_4K - 1)) <= SZ_4K,
"HYP init code too big or misaligned")
ASSERT(__idmap_text_end - (__idmap_text_start & ~(SZ_4K - 1)) <= SZ_4K,
"ID map text too big or misaligned")
#ifdef CONFIG_HIBERNATION
ASSERT(__hibernate_exit_text_end - (__hibernate_exit_text_start & ~(SZ_4K - 1))
<= SZ_4K, "Hibernate exit text too big or misaligned")
#endif
/*
* If padding is applied before .head.text, virt<->phys conversions will fail.
*/
ASSERT(_text == (KIMAGE_VADDR + TEXT_OFFSET), "HEAD is misaligned")